# Maedler India > Maedler India ## Pages - [Shop](https://maedler.in/shop/) - [Product](https://maedler.in/product/) - [Contact Us](https://maedler.in/contact-us/): Get in touch Registered OfficeUnit No. 316, Building No. 2 (A-3)Sector 1, Millennium Business Park,Mahape, Navi Mumbai – 400710022 27543078 & 022 27541281 Store & Workshop FacilityA 335, MIDC Industrial Area, MahapeNavi Mumbai, 400710+91 9326924287 Write us atinfo@maedler.in - [Return Policy](https://maedler.in/return-policy/): Return Policy Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, you may return it to us for a refund. Please see below for more information on our return policy. RETURNS All returns must be postmarked within 30 days of the purchase date. All returned items must be in be in new and unused condition, with all original tags and labels attached. RETURN PROCESS To return an item, email info@maedler.in to obtain a Return Merchandise Authorization (RMA) number. After receiving an RMA number, […] - [Terms & Conditions](https://maedler.in/terms/): Terms and Conditions Welcome to Maedler India! These terms and conditions outline the rules and regulations for the use of Maedler India’s Website, located at https://maedler.in. By accessing this website we assume you accept these terms and conditions. Do not continue to use MaedlerNorthAmerica if you do not agree to take all of the terms and conditions stated on this page. The following terminology applies to these Terms and Conditions, Privacy Statement and Disclaimer Notice and all Agreements: “Client”, “You” and “Your” refers to you, the person log on this website and compliant to the Company’s terms and conditions. “The […] - [Privacy Policy](https://maedler.in/privacy-policy/): Privacy Policy for Maedler India At Maedler India, accessible from https://maedler.in, one of our main priorities is the privacy of our visitors. This Privacy Policy document contains types of information that is collected and recorded by Maedler India and how we use it. If you have additional questions or require more information about our Privacy Policy, do not hesitate to contact us. This Privacy Policy applies only to our online activities and is valid for visitors to our website with regards to the information that they shared and/or collect in Maedler India. This policy is not applicable to any information […] - [Home](https://maedler.in/): More than 30,000 Parts! 140 years of experience – Drive-train technology for success SHOP MAEDLER HERE LARGE INVENTORY More than 30,000 parts QUALITY Items are tested for quality before they leave our production CUSTOMIZATION Custom made products and part customization SUPPORT Detailed product information in our webshop 24/7 During regular business hours we are happy to assist you personally Our production facilities Maedler Hamburg GERMANY Maedler Stuttgart GERMANY Maedler Düsseldorf GERMANY LEARN MORE ABOUT US AND OUR COMPANY - [Downloads](https://maedler.in/downloads/): Downloads & Information Catalog Download Operating instructions Ball Screw Drives Download Bevel Gearboxes DZA, DZR Download Bevel Gearboxes KEK Download Bevel Gearboxes KU/I, KUM Download Chain Tensioners SPANN-BOX®, SPANN-BOY® Download Continuously Variable Geared Motor MUN/I Download Couplings BOS II, BOZ, BW Download Coupling DXA Download Couplings MAEPEX Download Couplings RN, RNG, RNH, RNI, RNK, RNT Download Electronic Drip Oiler ELO Download Frequency Inverter NES1 Download Helical Geared Motor HR/I Download Helical Geared Motor NR/I Download Lifting Eye Bolts DIN 580 Download Lifting Eye Nuts DIN 582 Download Linear Drives (Actuators) GR/I Download Motor Base RMW Download Motor Controller MAE-MR-5-30 Download […] - [About Us](https://maedler.in/about-us/): Our History On November 9th, 1882 the foundations were laid. Bruno Mädler went self employed. He was dealing with fittings and hardware for the building industry, rivets, screws, bolts and nuts. But business went booming fast. In 1905 the company proudly moved into their first own company building. The numbers of customers, products and employees were quickly rising. Thus in the 30ies the company had about 300 employees and was one of the leading tool building and mechanical engineering companies in Germany. The end of the war in 1945 brought along drastic changes, also for Bruno Mädler. Two months before […] - [Maedler Tools](https://maedler.in/maedler-tools/): Timing Belt Calculator Chain Configurator - [My account](https://maedler.in/my-account/) - [Checkout](https://maedler.in/checkout/) - [Cart](https://maedler.in/cart/) ## Products - [Sprocket KRS with hub pitch 6mm 21 teeth material steel SKU: 10062100](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-21-teeth-material-steel-sku-10062100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 20 teeth material steel SKU: 10062000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-20-teeth-material-steel-sku-10062000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 19 teeth material steel SKU: 10061900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-19-teeth-material-steel-sku-10061900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 18 teeth material steel SKU: 10061800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-18-teeth-material-steel-sku-10061800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 17 teeth material steel SKU: 10061700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-17-teeth-material-steel-sku-10061700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 16 teeth material steel SKU: 10061600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-16-teeth-material-steel-sku-10061600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 15 teeth material steel SKU: 10061500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-15-teeth-material-steel-sku-10061500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 14 teeth material steel SKU: 10061400](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-14-teeth-material-steel-sku-10061400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 13 teeth material steel SKU: 10061300](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-13-teeth-material-steel-sku-10061300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 12 teeth material steel SKU: 10061200](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-12-teeth-material-steel-sku-10061200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 11 teeth material steel SKU: 10061100](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-11-teeth-material-steel-sku-10061100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 10 teeth material steel SKU: 10061000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-10-teeth-material-steel-sku-10061000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 9 teeth material steel SKU: 10060900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-9-teeth-material-steel-sku-10060900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 8 teeth material steel SKU: 10060800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-8-teeth-material-steel-sku-10060800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 25 teeth material polyacetal resin SKU: 10057500](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-25-teeth-material-polyacetal-resin-sku-10057500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 23 teeth material polyacetal resin SKU: 10057300](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-23-teeth-material-polyacetal-resin-sku-10057300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 21 teeth material polyacetal resin SKU: 10057100](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-21-teeth-material-polyacetal-resin-sku-10057100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 19 teeth material polyacetal resin SKU: 10056900](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-19-teeth-material-polyacetal-resin-sku-10056900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 17 teeth material polyacetal resin SKU: 10056700](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-17-teeth-material-polyacetal-resin-sku-10056700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 15 teeth material polyacetal resin SKU: 10056500](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-15-teeth-material-polyacetal-resin-sku-10056500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 13 teeth material polyacetal resin SKU: 10056300](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-13-teeth-material-polyacetal-resin-sku-10056300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 25 teeth material polyacetal resin SKU: 10052500](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-25-teeth-material-polyacetal-resin-sku-10052500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 23 teeth material polyacetal resin SKU: 10052300](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-23-teeth-material-polyacetal-resin-sku-10052300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 21 teeth material polyacetal resin SKU: 10052100](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-21-teeth-material-polyacetal-resin-sku-10052100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 19 teeth material polyacetal resin SKU: 10051900](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-19-teeth-material-polyacetal-resin-sku-10051900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 17 teeth material polyacetal resin SKU: 10051700](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-17-teeth-material-polyacetal-resin-sku-10051700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 15 teeth material polyacetal resin SKU: 10051500](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-15-teeth-material-polyacetal-resin-sku-10051500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 13 teeth material polyacetal resin SKU: 10051300](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-13-teeth-material-polyacetal-resin-sku-10051300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 57 teeth material steel SKU: 10035700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-57-teeth-material-steel-sku-10035700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 45 teeth material steel SKU: 10034500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-45-teeth-material-steel-sku-10034500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 40 teeth material steel SKU: 10034000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-40-teeth-material-steel-sku-10034000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 39 teeth material steel SKU: 10033900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-39-teeth-material-steel-sku-10033900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 38 teeth material steel SKU: 10033800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-38-teeth-material-steel-sku-10033800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 37 teeth material steel SKU: 10033700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-37-teeth-material-steel-sku-10033700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 36 teeth material steel SKU: 10033600](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-36-teeth-material-steel-sku-10033600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 35 teeth material steel SKU: 10033500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-35-teeth-material-steel-sku-10033500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 34 teeth material steel SKU: 10033400](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-34-teeth-material-steel-sku-10033400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 33 teeth material steel SKU: 10033300](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-33-teeth-material-steel-sku-10033300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 32 teeth material steel SKU: 10033200](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-32-teeth-material-steel-sku-10033200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 31 teeth material steel SKU: 10033100](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-31-teeth-material-steel-sku-10033100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 30 teeth material steel SKU: 10033000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-30-teeth-material-steel-sku-10033000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 29 teeth material steel SKU: 10032900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-29-teeth-material-steel-sku-10032900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 28 teeth material steel SKU: 10032800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-28-teeth-material-steel-sku-10032800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 27 teeth material steel SKU: 10032700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-27-teeth-material-steel-sku-10032700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 26 teeth material steel SKU: 10032600](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-26-teeth-material-steel-sku-10032600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 25 teeth material steel SKU: 10032500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-25-teeth-material-steel-sku-10032500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 24 teeth material steel SKU: 10032400](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-24-teeth-material-steel-sku-10032400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 23 teeth material steel SKU: 10032300](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-23-teeth-material-steel-sku-10032300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 22 teeth material steel SKU: 10032200](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-22-teeth-material-steel-sku-10032200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 21 teeth material steel SKU: 10032100](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-21-teeth-material-steel-sku-10032100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 20 teeth material steel SKU: 10032000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-20-teeth-material-steel-sku-10032000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 19 teeth material steel SKU: 10031900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-19-teeth-material-steel-sku-10031900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 18 teeth material steel SKU: 10031800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-18-teeth-material-steel-sku-10031800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 17 teeth material steel SKU: 10031700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-17-teeth-material-steel-sku-10031700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 16 teeth material steel SKU: 10031600](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-16-teeth-material-steel-sku-10031600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 15 teeth material steel SKU: 10031500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-15-teeth-material-steel-sku-10031500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 14 teeth material steel SKU: 10031400](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-14-teeth-material-steel-sku-10031400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 13 teeth material steel SKU: 10031300](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-13-teeth-material-steel-sku-10031300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 12 teeth material steel SKU: 10031200](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-12-teeth-material-steel-sku-10031200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 11 teeth material steel SKU: 10031100](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-11-teeth-material-steel-sku-10031100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 10 teeth material steel SKU: 10031000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-10-teeth-material-steel-sku-10031000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 09 teeth material steel SKU: 10030900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-09-teeth-material-steel-sku-10030900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 8 teeth material steel SKU: 10030800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-8-teeth-material-steel-sku-10030800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 95 teeth material steel SKU: 10008300](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-95-teeth-material-steel-sku-10008300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 76 teeth material steel SKU: 10007600](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-76-teeth-material-steel-sku-10007600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 57 teeth material steel SKU: 10005700](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-57-teeth-material-steel-sku-10005700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 45 teeth material steel SKU: 10004500](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-45-teeth-material-steel-sku-10004500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 38 teeth material steel SKU: 10003800](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-38-teeth-material-steel-sku-10003800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 30 teeth material steel SKU: 10003000](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-30-teeth-material-steel-sku-10003000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 25 teeth material steel SKU: 10002500](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-25-teeth-material-steel-sku-10002500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 24 teeth material steel SKU: 10002400](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-24-teeth-material-steel-sku-10002400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 23 teeth material steel SKU: 10002300](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-23-teeth-material-steel-sku-10002300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 21 teeth material steel SKU: 10002100](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-21-teeth-material-steel-sku-10002100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 19 teeth material steel SKU: 10001900](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-19-teeth-material-steel-sku-10001900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 17 teeth material steel SKU: 10001700](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-17-teeth-material-steel-sku-10001700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 15 teeth material steel SKU: 10001500](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-15-teeth-material-steel-sku-10001500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 14 teeth material steel SKU: 10001400](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-14-teeth-material-steel-sku-10001400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 13 teeth material steel SKU: 10001300](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-13-teeth-material-steel-sku-10001300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 12 teeth material steel SKU: 10001200](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-12-teeth-material-steel-sku-10001200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 60 teeth material steel SKU: 10086000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-60-teeth-material-steel-sku-10086000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 57 teeth material steel SKU: 10085700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-57-teeth-material-steel-sku-10085700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 50 teeth material steel SKU: 10085000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-50-teeth-material-steel-sku-10085000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 48 teeth material steel SKU: 10084800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-48-teeth-material-steel-sku-10084800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 45 teeth material steel SKU: 10084500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-45-teeth-material-steel-sku-10084500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 40 teeth material steel SKU: 10084000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-40-teeth-material-steel-sku-10084000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 39 teeth material steel SKU: 10083900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-39-teeth-material-steel-sku-10083900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 38 teeth material steel SKU: 10083800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-38-teeth-material-steel-sku-10083800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 37 teeth material steel SKU: 10083700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-37-teeth-material-steel-sku-10083700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 36 teeth material steel SKU: 10083600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-36-teeth-material-steel-sku-10083600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 35 teeth material steel SKU: 10083500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-35-teeth-material-steel-sku-10083500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 34 teeth material steel SKU: 10083400](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-34-teeth-material-steel-sku-10083400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 33 teeth material steel SKU: 10083300](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-33-teeth-material-steel-sku-10083300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 32 teeth material steel SKU: 10083200](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-32-teeth-material-steel-sku-10083200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 31 teeth material steel SKU: 10083100](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-31-teeth-material-steel-sku-10083100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 30 teeth material steel SKU: 10083000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-30-teeth-material-steel-sku-10083000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 29 teeth material steel SKU: 10082900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-29-teeth-material-steel-sku-10082900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 28 teeth material steel SKU: 10082800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-28-teeth-material-steel-sku-10082800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 27 teeth material steel SKU: 10082700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-27-teeth-material-steel-sku-10082700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 26 teeth material steel SKU: 10082600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-26-teeth-material-steel-sku-10082600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 25 teeth material steel SKU: 10082500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-25-teeth-material-steel-sku-10082500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 24 teeth material steel SKU: 10082400](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-24-teeth-material-steel-sku-10082400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 23 teeth material steel SKU: 10082300](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-23-teeth-material-steel-sku-10082300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 22 teeth material steel SKU: 10082200](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-22-teeth-material-steel-sku-10082200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 21 teeth material steel SKU: 10082100](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-21-teeth-material-steel-sku-10082100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 20 teeth material steel SKU: 10082000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-20-teeth-material-steel-sku-10082000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 19 teeth material steel SKU: 10081900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-19-teeth-material-steel-sku-10081900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 18 teeth material steel SKU: 10081800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-18-teeth-material-steel-sku-10081800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 17 teeth material steel SKU: 10081700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-17-teeth-material-steel-sku-10081700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 16 teeth material steel SKU: 10081600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-16-teeth-material-steel-sku-10081600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 15 teeth material steel SKU: 10081500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-15-teeth-material-steel-sku-10081500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 14 teeth material steel SKU: 10081400](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-14-teeth-material-steel-sku-10081400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 13 teeth material steel SKU: 10081300](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-13-teeth-material-steel-sku-10081300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 12 teeth material steel SKU: 10081200](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-12-teeth-material-steel-sku-10081200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 11 teeth material steel SKU: 10081100](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-11-teeth-material-steel-sku-10081100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 10 teeth material steel SKU: 10081000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-10-teeth-material-steel-sku-10081000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 9 teeth material steel SKU: 10080900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-9-teeth-material-steel-sku-10080900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 8 teeth material steel SKU: 10080800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-8-teeth-material-steel-sku-10080800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 114 teeth material steel SKU: 10078800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-114-teeth-material-steel-sku-10078800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 95 teeth material steel SKU: 10078300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-95-teeth-material-steel-sku-10078300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 80 teeth material steel SKU: 10078000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-80-teeth-material-steel-sku-10078000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 76 teeth material steel SKU: 10077600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-76-teeth-material-steel-sku-10077600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 70 teeth material steel SKU: 10077000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-70-teeth-material-steel-sku-10077000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 60 teeth material steel SKU: 10076000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-60-teeth-material-steel-sku-10076000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 57 teeth material steel SKU: 10075700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-57-teeth-material-steel-sku-10075700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 54 teeth material steel SKU: 10075400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-54-teeth-material-steel-sku-10075400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 50 teeth material steel SKU: 10075000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-50-teeth-material-steel-sku-10075000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 48 teeth material steel SKU: 10074800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-48-teeth-material-steel-sku-10074800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 45 teeth material steel SKU: 10074500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-45-teeth-material-steel-sku-10074500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 42 teeth material steel SKU: 10074200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-42-teeth-material-steel-sku-10074200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 40 teeth material steel SKU: 10074000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-40-teeth-material-steel-sku-10074000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 38 teeth material steel SKU: 10073800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-38-teeth-material-steel-sku-10073800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 36 teeth material steel SKU: 10073600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-36-teeth-material-steel-sku-10073600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 35 teeth material steel SKU: 10073500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-35-teeth-material-steel-sku-10073500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 32 teeth material steel SKU: 10073200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-32-teeth-material-steel-sku-10073200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 30 teeth material steel SKU: 10073000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-30-teeth-material-steel-sku-10073000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 28 teeth material steel SKU: 10072800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-28-teeth-material-steel-sku-10072800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 27 teeth material steel SKU: 10072700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-27-teeth-material-steel-sku-10072700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 26 teeth material steel SKU: 10072600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-26-teeth-material-steel-sku-10072600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 25 teeth material steel SKU: 10072500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-25-teeth-material-steel-sku-10072500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 24 teeth material steel SKU: 10072400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-24-teeth-material-steel-sku-10072400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 23 teeth material steel SKU: 10072300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-23-teeth-material-steel-sku-10072300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 22 teeth material steel SKU: 10072200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-22-teeth-material-steel-sku-10072200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 21 teeth material steel SKU: 10072100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-21-teeth-material-steel-sku-10072100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 20 teeth material steel SKU: 10072000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-20-teeth-material-steel-sku-10072000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 19 teeth material steel SKU: 10071900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-19-teeth-material-steel-sku-10071900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 18 teeth material steel SKU: 10071800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-18-teeth-material-steel-sku-10071800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 17 teeth material steel SKU: 10071700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-17-teeth-material-steel-sku-10071700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 16 teeth material steel SKU: 10071600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-16-teeth-material-steel-sku-10071600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 15 teeth material steel SKU: 10071500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-15-teeth-material-steel-sku-10071500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 14 teeth material steel SKU: 10071400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-14-teeth-material-steel-sku-10071400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 13 teeth material steel SKU: 10071300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-13-teeth-material-steel-sku-10071300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 12 teeth material steel SKU: 10071200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-12-teeth-material-steel-sku-10071200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 11 teeth material steel SKU: 10071100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-11-teeth-material-steel-sku-10071100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 10 teeth material steel SKU: 10071000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-10-teeth-material-steel-sku-10071000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 9 teeth material steel SKU: 10070900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-9-teeth-material-steel-sku-10070900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 8 teeth material steel SKU: 10070800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-8-teeth-material-steel-sku-10070800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 76 teeth material steel SKU: 10067600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-76-teeth-material-steel-sku-10067600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 57 teeth material steel SKU: 10065700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-57-teeth-material-steel-sku-10065700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 48 teeth material steel SKU: 10064800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-48-teeth-material-steel-sku-10064800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 45 teeth material steel SKU: 10064500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-45-teeth-material-steel-sku-10064500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 40 teeth material steel SKU: 10064000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-40-teeth-material-steel-sku-10064000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 39 teeth material steel SKU: 10063900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-39-teeth-material-steel-sku-10063900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 38 teeth material steel SKU: 10063800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-38-teeth-material-steel-sku-10063800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 37 teeth material steel SKU: 10063700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-37-teeth-material-steel-sku-10063700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 36 teeth material steel SKU: 10063600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-36-teeth-material-steel-sku-10063600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 35 teeth material steel SKU: 10063500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-35-teeth-material-steel-sku-10063500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 34 teeth material steel SKU: 10063400](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-34-teeth-material-steel-sku-10063400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 33 teeth material steel SKU: 10063300](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-33-teeth-material-steel-sku-10063300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 32 teeth material steel SKU: 10063200](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-32-teeth-material-steel-sku-10063200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 31 teeth material steel SKU: 10063100](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-31-teeth-material-steel-sku-10063100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 30 teeth material steel SKU: 10063000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-30-teeth-material-steel-sku-10063000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 29 teeth material steel SKU: 10062900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-29-teeth-material-steel-sku-10062900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 28 teeth material steel SKU: 10062800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-28-teeth-material-steel-sku-10062800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 27 teeth material steel SKU: 10062700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-27-teeth-material-steel-sku-10062700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 26 teeth material steel SKU: 10062600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-26-teeth-material-steel-sku-10062600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 25 teeth material steel SKU: 10062500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-25-teeth-material-steel-sku-10062500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 24 teeth material steel SKU: 10062400](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-24-teeth-material-steel-sku-10062400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 23 teeth material steel SKU: 10062300](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-23-teeth-material-steel-sku-10062300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 22 teeth material steel SKU: 10062200](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-22-teeth-material-steel-sku-10062200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 14 teeth material steel SKU: 10121400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-14-teeth-material-steel-sku-10121400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 13 teeth material steel SKU: 10121300](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-13-teeth-material-steel-sku-10121300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 12 teeth material steel SKU: 10121200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-12-teeth-material-steel-sku-10121200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 11 teeth material steel SKU: 10121100](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-11-teeth-material-steel-sku-10121100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 10 teeth material steel SKU: 10121000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-10-teeth-material-steel-sku-10121000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 9 teeth material steel SKU: 10120900](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-9-teeth-material-steel-sku-10120900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 8 teeth material steel SKU: 10120800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-8-teeth-material-steel-sku-10120800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 114 teeth material cast iron SKU: 10118800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-114-teeth-material-cast-iron-sku-10118800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 95 teeth material cast iron SKU: 10118300](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-95-teeth-material-cast-iron-sku-10118300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 76 teeth material cast iron SKU: 10117600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-76-teeth-material-cast-iron-sku-10117600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 57 teeth material cast iron SKU: 10115700](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-57-teeth-material-cast-iron-sku-10115700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 45 teeth material cast iron SKU: 10114500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-45-teeth-material-cast-iron-sku-10114500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 40 teeth material steel SKU: 10114000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-40-teeth-material-steel-sku-10114000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 38 teeth material steel SKU: 10113800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-38-teeth-material-steel-sku-10113800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 36 teeth material steel SKU: 10113600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-36-teeth-material-steel-sku-10113600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 35 teeth material steel SKU: 10113500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-35-teeth-material-steel-sku-10113500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 32 teeth material steel SKU: 10113200](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-32-teeth-material-steel-sku-10113200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 30 teeth material steel SKU: 10113000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-30-teeth-material-steel-sku-10113000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 29 teeth material steel SKU: 10112900](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-29-teeth-material-steel-sku-10112900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 28 teeth material steel SKU: 10112800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-28-teeth-material-steel-sku-10112800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 27 teeth material steel SKU: 10112700](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-27-teeth-material-steel-sku-10112700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 26 teeth material steel SKU: 10112600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-26-teeth-material-steel-sku-10112600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 25 teeth material steel SKU: 10112500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-25-teeth-material-steel-sku-10112500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 24 teeth material steel SKU: 10112400](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-24-teeth-material-steel-sku-10112400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 23 teeth material steel SKU: 10112300](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-23-teeth-material-steel-sku-10112300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 22 teeth material steel SKU: 10112200](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-22-teeth-material-steel-sku-10112200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 21 teeth material steel SKU: 10112100](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-21-teeth-material-steel-sku-10112100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 20 teeth material steel SKU: 10112000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-20-teeth-material-steel-sku-10112000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 19 teeth material steel SKU: 10111900](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-19-teeth-material-steel-sku-10111900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 18 teeth material steel SKU: 10111800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-18-teeth-material-steel-sku-10111800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 17 teeth material steel SKU: 10111700](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-17-teeth-material-steel-sku-10111700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 16 teeth material steel SKU: 10111600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-16-teeth-material-steel-sku-10111600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 15 teeth material steel SKU: 10111500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-15-teeth-material-steel-sku-10111500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 14 teeth material steel SKU: 10111400](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-14-teeth-material-steel-sku-10111400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 13 teeth material steel SKU: 10111300](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-13-teeth-material-steel-sku-10111300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 12 teeth material steel SKU: 10111200](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-12-teeth-material-steel-sku-10111200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 11 teeth material steel SKU: 10111100](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-11-teeth-material-steel-sku-10111100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 10 teeth material steel SKU: 10111000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-10-teeth-material-steel-sku-10111000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 9 teeth material steel SKU: 10110900](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-9-teeth-material-steel-sku-10110900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 8 teeth material steel SKU: 10110800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-8-teeth-material-steel-sku-10110800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 40 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099840](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-40-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099840/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099830](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099830/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099825](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099825/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099823](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099823/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099821](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099821/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099820](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099820/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099819](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099819/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099817](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099817/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099815](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099815/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099813](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099813/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099630](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099630/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099625](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099625/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099623](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099623/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099621](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099621/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099620](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099620/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099619](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099619/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099617](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099617/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099615](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099615/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099613](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099613/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 114 teeth material steel SKU: 10098800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-114-teeth-material-steel-sku-10098800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 83 teeth material steel SKU: 10098300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-83-teeth-material-steel-sku-10098300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 80 teeth material steel SKU: 10098000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-80-teeth-material-steel-sku-10098000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 76 teeth material steel SKU: 10097600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-76-teeth-material-steel-sku-10097600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 70 teeth material steel SKU: 10097000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-70-teeth-material-steel-sku-10097000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 65 teeth material steel SKU: 10096500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-65-teeth-material-steel-sku-10096500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 60 teeth material steel SKU: 10096000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-60-teeth-material-steel-sku-10096000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 57 teeth material steel SKU: 10095700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-57-teeth-material-steel-sku-10095700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 54 teeth material steel SKU: 10095400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-54-teeth-material-steel-sku-10095400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 50 teeth material steel SKU: 10095000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-50-teeth-material-steel-sku-10095000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 48 teeth material steel SKU: 10094800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-48-teeth-material-steel-sku-10094800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 45 teeth material steel SKU: 10094500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-45-teeth-material-steel-sku-10094500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 42 teeth material steel SKU: 10094200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-42-teeth-material-steel-sku-10094200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 40 teeth material steel SKU: 10094000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-40-teeth-material-steel-sku-10094000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 38 teeth material steel SKU: 10093800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-38-teeth-material-steel-sku-10093800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 36 teeth material steel SKU: 10093600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-36-teeth-material-steel-sku-10093600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 35 teeth material steel SKU: 10093500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-35-teeth-material-steel-sku-10093500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 32 teeth material steel SKU: 10093200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-32-teeth-material-steel-sku-10093200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 30 teeth material steel SKU: 10093000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-30-teeth-material-steel-sku-10093000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 28 teeth material steel SKU: 10092800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-28-teeth-material-steel-sku-10092800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 27 teeth material steel SKU: 10092700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-27-teeth-material-steel-sku-10092700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 26 teeth material steel SKU: 10092600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-26-teeth-material-steel-sku-10092600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 25 teeth material steel SKU: 10092500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-25-teeth-material-steel-sku-10092500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 24 teeth material steel SKU: 10092400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-24-teeth-material-steel-sku-10092400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 23 teeth material steel SKU: 10092300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-23-teeth-material-steel-sku-10092300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 22 teeth material steel SKU: 10092200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-22-teeth-material-steel-sku-10092200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 21 teeth material steel SKU: 10092100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-21-teeth-material-steel-sku-10092100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 20 teeth material steel SKU: 10092000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-20-teeth-material-steel-sku-10092000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 19 teeth material steel SKU: 10091900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-19-teeth-material-steel-sku-10091900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 18 teeth material steel SKU: 10091800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-18-teeth-material-steel-sku-10091800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 17 teeth material steel SKU: 10091700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-17-teeth-material-steel-sku-10091700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 16 teeth material steel SKU: 10091600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-16-teeth-material-steel-sku-10091600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 15 teeth material steel SKU: 10091500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-15-teeth-material-steel-sku-10091500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 14 teeth material steel SKU: 10091400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-14-teeth-material-steel-sku-10091400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 13 teeth material steel SKU: 10091300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-13-teeth-material-steel-sku-10091300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 12 teeth material steel SKU: 10091200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-12-teeth-material-steel-sku-10091200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 11 teeth material steel SKU: 10091100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-11-teeth-material-steel-sku-10091100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 10 teeth material steel SKU: 10091000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-10-teeth-material-steel-sku-10091000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 9 teeth material steel SKU: 10090900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-9-teeth-material-steel-sku-10090900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 8 teeth material steel SKU: 10090800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-8-teeth-material-steel-sku-10090800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 76 teeth material steel SKU: 10087600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-76-teeth-material-steel-sku-10087600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181416](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181415](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181414](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181414/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181412](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181412/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181318](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181318/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181316](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181316/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181315](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181315/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181314](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181314/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181312](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181312/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181310](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181310/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181216](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181216/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181215](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181215/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181214](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181214/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181212](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181212/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181210](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181210/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181116](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181116/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181115](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181115/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181114](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181114/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181112](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181112/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181110](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181110/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181014](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181014/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181012](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181012/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 11H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181011](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-11h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181011/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181010](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181010/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRTG 06 B-1 3/8x7/32" 30 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178130](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 28 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178128](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 27 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178127](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 26 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178126](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 25 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178125](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 24 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178124](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 23 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178123](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 22 teeth material steel teeth hardened for taper bush type 1108 SKU: 10178122](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-1108-sku-10178122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 21 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178121](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 20 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178120](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 19 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178119](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 18 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178118](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 17 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178117](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 114 teeth material cast iron for taper bush type 1215 SKU: 10177188G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-114-teeth-material-cast-iron-for-taper-bush-type-1215-sku-10177188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material cast iron for taper bush type 1210 SKU: 10177183G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-95-teeth-material-cast-iron-for-taper-bush-type-1210-sku-10177183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material steel for taper bush type 1210 SKU: 10177183](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-95-teeth-material-steel-for-taper-bush-type-1210-sku-10177183/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 76 teeth material cast iron for taper bush type 1210 SKU: 10177176G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-76-teeth-material-cast-iron-for-taper-bush-type-1210-sku-10177176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 57 teeth material cast iron for taper bush type 1210 SKU: 10177157G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-57-teeth-material-cast-iron-for-taper-bush-type-1210-sku-10177157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 57 teeth material steel for taper bush type 1210 SKU: 10177157](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-57-teeth-material-steel-for-taper-bush-type-1210-sku-10177157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 45 teeth material steel for taper bush type 1210 SKU: 10177145](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-45-teeth-material-steel-for-taper-bush-type-1210-sku-10177145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 38 teeth material steel for taper bush type 1210 SKU: 10177138](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-38-teeth-material-steel-for-taper-bush-type-1210-sku-10177138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 30 teeth material steel for taper bush type 1210 SKU: 10177130](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-30-teeth-material-steel-for-taper-bush-type-1210-sku-10177130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 28 teeth material steel for taper bush type 1210 SKU: 10177128](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-28-teeth-material-steel-for-taper-bush-type-1210-sku-10177128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 27 teeth material steel for taper bush type 1210 SKU: 10177127](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-27-teeth-material-steel-for-taper-bush-type-1210-sku-10177127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 26 teeth material steel for taper bush type 1210 SKU: 10177126](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-26-teeth-material-steel-for-taper-bush-type-1210-sku-10177126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 25 teeth material steel for taper bush type 1210 SKU: 10177125](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-25-teeth-material-steel-for-taper-bush-type-1210-sku-10177125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 24 teeth material steel for taper bush type 1210 SKU: 10177124](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-24-teeth-material-steel-for-taper-bush-type-1210-sku-10177124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 23 teeth material steel for taper bush type 1210 SKU: 10177123](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-23-teeth-material-steel-for-taper-bush-type-1210-sku-10177123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 22 teeth material steel for taper bush type 1108 SKU: 10177122](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-22-teeth-material-steel-for-taper-bush-type-1108-sku-10177122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 21 teeth material steel for taper bush type 1008 SKU: 10177121](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-21-teeth-material-steel-for-taper-bush-type-1008-sku-10177121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 20 teeth material steel for taper bush type 1008 SKU: 10177120](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-20-teeth-material-steel-for-taper-bush-type-1008-sku-10177120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 19 teeth material steel for taper bush type 1008 SKU: 10177119](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-19-teeth-material-steel-for-taper-bush-type-1008-sku-10177119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 18 teeth material steel for taper bush type 1008 SKU: 10177118](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-18-teeth-material-steel-for-taper-bush-type-1008-sku-10177118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 17 teeth material steel for taper bush type 1008 SKU: 10177117](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-17-teeth-material-steel-for-taper-bush-type-1008-sku-10177117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 25 teeth material polyacetal resin SKU: 10152500](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-25-teeth-material-polyacetal-resin-sku-10152500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 23 teeth material polyacetal resin SKU: 10152300](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-23-teeth-material-polyacetal-resin-sku-10152300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 21 teeth material polyacetal resin SKU: 10152100](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-21-teeth-material-polyacetal-resin-sku-10152100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 19 teeth material polyacetal resin SKU: 10151900](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-19-teeth-material-polyacetal-resin-sku-10151900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 17 teeth material polyacetal resin SKU: 10151700](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-17-teeth-material-polyacetal-resin-sku-10151700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 15 teeth material polyacetal resin SKU: 10151500](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-15-teeth-material-polyacetal-resin-sku-10151500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 13 teeth material polyacetal resin SKU: 10151300](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-13-teeth-material-polyacetal-resin-sku-10151300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 114 teeth material steel SKU: 10128800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-114-teeth-material-steel-sku-10128800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 95 teeth material steel SKU: 10128300](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-95-teeth-material-steel-sku-10128300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 80 teeth material steel SKU: 10128000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-80-teeth-material-steel-sku-10128000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 76 teeth material steel SKU: 10127600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-76-teeth-material-steel-sku-10127600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 72 teeth material steel SKU: 10127200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-72-teeth-material-steel-sku-10127200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 70 teeth material steel SKU: 10127000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-70-teeth-material-steel-sku-10127000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 65 teeth material steel SKU: 10126500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-65-teeth-material-steel-sku-10126500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 60 teeth material steel SKU: 10126000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-60-teeth-material-steel-sku-10126000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 57 teeth material steel SKU: 10125700](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-57-teeth-material-steel-sku-10125700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 54 teeth material steel SKU: 10125400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-54-teeth-material-steel-sku-10125400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 50 teeth material steel SKU: 10125000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-50-teeth-material-steel-sku-10125000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 48 teeth material steel SKU: 10124800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-48-teeth-material-steel-sku-10124800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 45 teeth material steel SKU: 10124500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-45-teeth-material-steel-sku-10124500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 44 teeth material steel SKU: 10124400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-44-teeth-material-steel-sku-10124400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 42 teeth material steel SKU: 10124200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-42-teeth-material-steel-sku-10124200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 40 teeth material steel SKU: 10124000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-40-teeth-material-steel-sku-10124000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 38 teeth material steel SKU: 10123800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-38-teeth-material-steel-sku-10123800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 36 teeth material steel SKU: 10123600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-36-teeth-material-steel-sku-10123600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 35 teeth material steel SKU: 10123500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-35-teeth-material-steel-sku-10123500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 32 teeth material steel SKU: 10123200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-32-teeth-material-steel-sku-10123200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 30 teeth material steel SKU: 10123000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-30-teeth-material-steel-sku-10123000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 28 teeth material steel SKU: 10122800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-28-teeth-material-steel-sku-10122800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 27 teeth material steel SKU: 10122700](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-27-teeth-material-steel-sku-10122700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 26 teeth material steel SKU: 10122600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-26-teeth-material-steel-sku-10122600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 25 teeth material steel SKU: 10122500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-25-teeth-material-steel-sku-10122500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 24 teeth material steel SKU: 10122400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-24-teeth-material-steel-sku-10122400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 23 teeth material steel SKU: 10122300](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-23-teeth-material-steel-sku-10122300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 22 teeth material steel SKU: 10122200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-22-teeth-material-steel-sku-10122200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 21 teeth material steel SKU: 10122100](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-21-teeth-material-steel-sku-10122100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 20 teeth material steel SKU: 10122000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-20-teeth-material-steel-sku-10122000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 19 teeth material steel SKU: 10121900](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-19-teeth-material-steel-sku-10121900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 18 teeth material steel SKU: 10121800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-18-teeth-material-steel-sku-10121800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 17 teeth material steel SKU: 10121700](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-17-teeth-material-steel-sku-10121700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 16 teeth material steel SKU: 10121600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-16-teeth-material-steel-sku-10121600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 15 teeth material steel SKU: 10121500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-15-teeth-material-steel-sku-10121500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182524](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182522](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182520](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182519](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182518](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182518/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182516](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182516/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182430](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182425](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182424](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182424/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182422](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182422/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182420](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182419](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182418](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182416](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182325](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182324](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182322](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182320](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182319](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182318](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182318/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182316](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182316/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182315](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182315/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182225](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182224](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182222](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182220](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182219](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182218](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182218/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182216](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182216/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182215](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182215/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182125](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182124](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182122](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182122/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182120](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182119](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182118](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182118/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182116](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182116/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182115](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182115/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182025](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182024](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182022](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182022/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182020](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182019](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182018](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182018/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182016](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182016/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182015](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182015/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182014](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182014/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182012](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182012/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181925](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181925/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181924](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181924/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181922](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181922/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181920](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181920/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181919](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181919/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181918](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181918/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181916](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181916/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181915](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181915/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181914](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181914/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181912](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181912/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181825](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181825/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181824](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181824/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181822](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181822/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181820](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181820/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181819](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181819/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181818](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181818/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181816](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181816/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181815](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181815/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181814](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181814/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181812](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181812/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181725](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181725/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181724](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181724/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181722](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181722/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181720](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181720/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181719](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181719/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181718](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181718/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181716](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181716/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181715](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181715/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181714](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181714/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181712](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181712/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181625](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181625/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181624](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181624/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181622](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181622/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181620](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181620/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181619](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181619/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181618](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181618/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181616](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181616/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181615](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181615/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181614](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181614/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181612](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181612/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181525](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181524](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181522](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181520](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181519](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181518](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181518/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181516](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181516/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181515](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181515/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181514](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181514/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181512](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181512/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181419](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181418](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 20 teeth material steel SKU: 10222000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-20-teeth-material-steel-sku-10222000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 19 teeth material steel SKU: 10221900](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-19-teeth-material-steel-sku-10221900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 18 teeth material steel SKU: 10221800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-18-teeth-material-steel-sku-10221800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 17 teeth material steel SKU: 10221700](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-17-teeth-material-steel-sku-10221700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 16 teeth material steel SKU: 10221600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-16-teeth-material-steel-sku-10221600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 15 teeth material steel SKU: 10221500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-15-teeth-material-steel-sku-10221500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 14 teeth material steel SKU: 10221400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-14-teeth-material-steel-sku-10221400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 13 teeth material steel SKU: 10221300](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-13-teeth-material-steel-sku-10221300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 12 teeth material steel SKU: 10221200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-12-teeth-material-steel-sku-10221200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 11 teeth material steel SKU: 10221100](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-11-teeth-material-steel-sku-10221100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 10 teeth material steel SKU: 10221000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-10-teeth-material-steel-sku-10221000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 9 teeth material steel SKU: 10220900](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-9-teeth-material-steel-sku-10220900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 8 teeth material steel SKU: 10220800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-8-teeth-material-steel-sku-10220800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 40 teeth material steel SKU: 10214000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-40-teeth-material-steel-sku-10214000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 39 teeth material steel SKU: 10213900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-39-teeth-material-steel-sku-10213900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 38 teeth material steel SKU: 10213800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-38-teeth-material-steel-sku-10213800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 37 teeth material steel SKU: 10213700](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-37-teeth-material-steel-sku-10213700/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 36 teeth material steel SKU: 10213600](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-36-teeth-material-steel-sku-10213600/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 35 teeth material steel SKU: 10213500](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-35-teeth-material-steel-sku-10213500/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 34 teeth material steel SKU: 10213400](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-34-teeth-material-steel-sku-10213400/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 33 teeth material steel SKU: 10213300](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-33-teeth-material-steel-sku-10213300/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 32 teeth material steel SKU: 10213200](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-32-teeth-material-steel-sku-10213200/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 31 teeth material steel SKU: 10213100](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-31-teeth-material-steel-sku-10213100/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 30 teeth material steel SKU: 10213000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-30-teeth-material-steel-sku-10213000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 29 teeth material steel SKU: 10212900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-29-teeth-material-steel-sku-10212900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 28 teeth material steel SKU: 10212800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-28-teeth-material-steel-sku-10212800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 27 teeth material steel SKU: 10212700](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-27-teeth-material-steel-sku-10212700/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 26 teeth material steel SKU: 10212600](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-26-teeth-material-steel-sku-10212600/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 25 teeth material steel SKU: 10212500](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-25-teeth-material-steel-sku-10212500/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 24 teeth material steel SKU: 10212400](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-24-teeth-material-steel-sku-10212400/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 23 teeth material steel SKU: 10212300](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-23-teeth-material-steel-sku-10212300/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 22 teeth material steel SKU: 10212200](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-22-teeth-material-steel-sku-10212200/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 21 teeth material steel SKU: 10212100](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-21-teeth-material-steel-sku-10212100/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 20 teeth material steel SKU: 10212000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-20-teeth-material-steel-sku-10212000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 19 teeth material steel SKU: 10211900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-19-teeth-material-steel-sku-10211900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 18 teeth material steel SKU: 10211800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-18-teeth-material-steel-sku-10211800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 17 teeth material steel SKU: 10211700](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-17-teeth-material-steel-sku-10211700/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 16 teeth material steel SKU: 10211600](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-16-teeth-material-steel-sku-10211600/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 15 teeth material steel SKU: 10211500](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-15-teeth-material-steel-sku-10211500/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 14 teeth material steel SKU: 10211400](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-14-teeth-material-steel-sku-10211400/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 13 teeth material steel SKU: 10211300](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-13-teeth-material-steel-sku-10211300/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 12 teeth material steel SKU: 10211200](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-12-teeth-material-steel-sku-10211200/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 11 teeth material steel SKU: 10211100](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-11-teeth-material-steel-sku-10211100/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 10 teeth material steel SKU: 10211000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-10-teeth-material-steel-sku-10211000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 9 teeth material steel SKU: 10210900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-9-teeth-material-steel-sku-10210900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 8 teeth material steel SKU: 10210800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-8-teeth-material-steel-sku-10210800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/8x7/32" 40 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199140](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-8x7-32-40-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199140/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/8x7/32" 38 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199138](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-8x7-32-38-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199138/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/8x7/32" 32 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199132](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-8x7-32-32-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199132/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199130](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 28 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199128](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-28-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199128/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199125](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199124](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199123](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199122](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199121](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199120](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199119](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199118](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199117](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199116](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199115](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199114](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199113](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199112](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 40 teeth material steel teeth induction hardened SKU: 10188140](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-40-teeth-material-steel-teeth-induction-hardened-sku-10188140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 38 teeth material steel teeth induction hardened SKU: 10188138](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-38-teeth-material-steel-teeth-induction-hardened-sku-10188138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 36 teeth material steel teeth induction hardened SKU: 10188136](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-36-teeth-material-steel-teeth-induction-hardened-sku-10188136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 35 teeth material steel teeth induction hardened SKU: 10188135](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-35-teeth-material-steel-teeth-induction-hardened-sku-10188135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 32 teeth material steel teeth induction hardened SKU: 10188132](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-32-teeth-material-steel-teeth-induction-hardened-sku-10188132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 30 teeth material steel teeth induction hardened SKU: 10188130](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-30-teeth-material-steel-teeth-induction-hardened-sku-10188130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 28 teeth material steel teeth induction hardened SKU: 10188128](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-28-teeth-material-steel-teeth-induction-hardened-sku-10188128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 27 teeth material steel teeth induction hardened SKU: 10188127](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-27-teeth-material-steel-teeth-induction-hardened-sku-10188127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 26 teeth material steel teeth induction hardened SKU: 10188126](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-26-teeth-material-steel-teeth-induction-hardened-sku-10188126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 25 teeth material steel teeth induction hardened SKU: 10188125](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-25-teeth-material-steel-teeth-induction-hardened-sku-10188125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 24 teeth material steel teeth induction hardened SKU: 10188124](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-24-teeth-material-steel-teeth-induction-hardened-sku-10188124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 23 teeth material steel teeth induction hardened SKU: 10188123](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-23-teeth-material-steel-teeth-induction-hardened-sku-10188123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 22 teeth material steel teeth induction hardened SKU: 10188122](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-22-teeth-material-steel-teeth-induction-hardened-sku-10188122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 21 teeth material steel teeth induction hardened SKU: 10188121](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-21-teeth-material-steel-teeth-induction-hardened-sku-10188121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 20 teeth material steel teeth induction hardened SKU: 10188120](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-20-teeth-material-steel-teeth-induction-hardened-sku-10188120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 19 teeth material steel teeth induction hardened SKU: 10188119](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-19-teeth-material-steel-teeth-induction-hardened-sku-10188119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 18 teeth material steel teeth induction hardened SKU: 10188118](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-18-teeth-material-steel-teeth-induction-hardened-sku-10188118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 17 teeth material steel teeth induction hardened SKU: 10188117](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-17-teeth-material-steel-teeth-induction-hardened-sku-10188117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 16 teeth material steel teeth induction hardened SKU: 10188116](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-16-teeth-material-steel-teeth-induction-hardened-sku-10188116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 15 teeth material steel teeth induction hardened SKU: 10188115](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-15-teeth-material-steel-teeth-induction-hardened-sku-10188115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 14 teeth material steel teeth induction hardened SKU: 10188114](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-14-teeth-material-steel-teeth-induction-hardened-sku-10188114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 13 teeth material steel teeth induction hardened SKU: 10188113](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-13-teeth-material-steel-teeth-induction-hardened-sku-10188113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 12 teeth material steel teeth induction hardened SKU: 10188112](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-12-teeth-material-steel-teeth-induction-hardened-sku-10188112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 11 teeth material steel teeth induction hardened SKU: 10188111](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-11-teeth-material-steel-teeth-induction-hardened-sku-10188111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 10 teeth material steel teeth induction hardened SKU: 10188110](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-10-teeth-material-steel-teeth-induction-hardened-sku-10188110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 9 teeth material steel teeth induction hardened SKU: 10188109](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-9-teeth-material-steel-teeth-induction-hardened-sku-10188109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 8 teeth material steel teeth induction hardened SKU: 10188108](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-8-teeth-material-steel-teeth-induction-hardened-sku-10188108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183030](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183028](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183025](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183024](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183022](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183022/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183020](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182530](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182525](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 47 teeth material steel SKU: 10324700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-47-teeth-material-steel-sku-10324700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 45 teeth material steel SKU: 10324500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-45-teeth-material-steel-sku-10324500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 42 teeth material steel SKU: 10324200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-42-teeth-material-steel-sku-10324200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 40 teeth material steel SKU: 10324000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-40-teeth-material-steel-sku-10324000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 38 teeth material steel SKU: 10323800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-38-teeth-material-steel-sku-10323800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 36 teeth material steel SKU: 10323600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-36-teeth-material-steel-sku-10323600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 35 teeth material steel SKU: 10323500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-35-teeth-material-steel-sku-10323500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 34 teeth material steel SKU: 10323400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-34-teeth-material-steel-sku-10323400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 32 teeth material steel SKU: 10323200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-32-teeth-material-steel-sku-10323200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 30 teeth material steel SKU: 10323000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-30-teeth-material-steel-sku-10323000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 28 teeth material steel SKU: 10322800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-28-teeth-material-steel-sku-10322800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 27 teeth material steel SKU: 10322700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-27-teeth-material-steel-sku-10322700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 26 teeth material steel SKU: 10322600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-26-teeth-material-steel-sku-10322600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 25 teeth material steel SKU: 10322500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-25-teeth-material-steel-sku-10322500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 24 teeth material steel SKU: 10322400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-24-teeth-material-steel-sku-10322400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 23 teeth material steel SKU: 10322300](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-23-teeth-material-steel-sku-10322300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 22 teeth material steel SKU: 10322200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-22-teeth-material-steel-sku-10322200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 21 teeth material steel SKU: 10322100](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-21-teeth-material-steel-sku-10322100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 20 teeth material steel SKU: 10322000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-20-teeth-material-steel-sku-10322000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 19 teeth material steel SKU: 10321900](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-19-teeth-material-steel-sku-10321900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 18 teeth material steel SKU: 10321800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-18-teeth-material-steel-sku-10321800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 17 teeth material steel SKU: 10321700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-17-teeth-material-steel-sku-10321700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 16 teeth material steel SKU: 10321600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-16-teeth-material-steel-sku-10321600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 15 teeth material steel SKU: 10321500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-15-teeth-material-steel-sku-10321500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 14 teeth material steel SKU: 10321400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-14-teeth-material-steel-sku-10321400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 13 teeth material steel SKU: 10321300](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-13-teeth-material-steel-sku-10321300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 12 teeth material steel SKU: 10321200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-12-teeth-material-steel-sku-10321200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 11 teeth material steel SKU: 10321100](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-11-teeth-material-steel-sku-10321100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 10 teeth material steel SKU: 10321000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-10-teeth-material-steel-sku-10321000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 9 teeth material steel SKU: 10320900](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-9-teeth-material-steel-sku-10320900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 8 teeth material steel SKU: 10320800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-8-teeth-material-steel-sku-10320800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 40 teeth material steel SKU: 10314000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-40-teeth-material-steel-sku-10314000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 39 teeth material steel SKU: 10313900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-39-teeth-material-steel-sku-10313900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 38 teeth material steel SKU: 10313800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-38-teeth-material-steel-sku-10313800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 37 teeth material steel SKU: 10313700](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-37-teeth-material-steel-sku-10313700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 36 teeth material steel SKU: 10313600](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-36-teeth-material-steel-sku-10313600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 35 teeth material steel SKU: 10313500](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-35-teeth-material-steel-sku-10313500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 34 teeth material steel SKU: 10313400](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-34-teeth-material-steel-sku-10313400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 33 teeth material steel SKU: 10313300](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-33-teeth-material-steel-sku-10313300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 32 teeth material steel SKU: 10313200](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-32-teeth-material-steel-sku-10313200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 31 teeth material steel SKU: 10313100](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-31-teeth-material-steel-sku-10313100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 30 teeth material steel SKU: 10313000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-30-teeth-material-steel-sku-10313000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 29 teeth material steel SKU: 10312900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-29-teeth-material-steel-sku-10312900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 28 teeth material steel SKU: 10312800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-28-teeth-material-steel-sku-10312800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 27 teeth material steel SKU: 10312700](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-27-teeth-material-steel-sku-10312700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 26 teeth material steel SKU: 10312600](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-26-teeth-material-steel-sku-10312600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 25 teeth material steel SKU: 10312500](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-25-teeth-material-steel-sku-10312500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 24 teeth material steel SKU: 10312400](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-24-teeth-material-steel-sku-10312400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 23 teeth material steel SKU: 10312300](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-23-teeth-material-steel-sku-10312300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 22 teeth material steel SKU: 10312200](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-22-teeth-material-steel-sku-10312200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 21 teeth material steel SKU: 10312100](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-21-teeth-material-steel-sku-10312100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 20 teeth material steel SKU: 10312000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-20-teeth-material-steel-sku-10312000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 19 teeth material steel SKU: 10311900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-19-teeth-material-steel-sku-10311900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 18 teeth material steel SKU: 10311800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-18-teeth-material-steel-sku-10311800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 17 teeth material steel SKU: 10311700](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-17-teeth-material-steel-sku-10311700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 16 teeth material steel SKU: 10311600](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-16-teeth-material-steel-sku-10311600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 15 teeth material steel SKU: 10311500](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-15-teeth-material-steel-sku-10311500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 14 teeth material steel SKU: 10311400](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-14-teeth-material-steel-sku-10311400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 13 teeth material steel SKU: 10311300](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-13-teeth-material-steel-sku-10311300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 12 teeth material steel SKU: 10311200](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-12-teeth-material-steel-sku-10311200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 11 teeth material steel SKU: 10311100](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-11-teeth-material-steel-sku-10311100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 10 teeth material steel SKU: 10311000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-10-teeth-material-steel-sku-10311000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 9 teeth material steel SKU: 10310900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-9-teeth-material-steel-sku-10310900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 8 teeth material steel SKU: 10310800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-8-teeth-material-steel-sku-10310800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 25 teeth material polyacetal resin SKU: 10252500](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-25-teeth-material-polyacetal-resin-sku-10252500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 23 teeth material polyacetal resin SKU: 10252300](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-23-teeth-material-polyacetal-resin-sku-10252300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 21 teeth material polyacetal resin SKU: 10252100](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-21-teeth-material-polyacetal-resin-sku-10252100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 19 teeth material polyacetal resin SKU: 10251900](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-19-teeth-material-polyacetal-resin-sku-10251900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 17 teeth material polyacetal resin SKU: 10251700](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-17-teeth-material-polyacetal-resin-sku-10251700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 15 teeth material polyacetal resin SKU: 10251500](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-15-teeth-material-polyacetal-resin-sku-10251500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 13 teeth material polyacetal resin SKU: 10251300](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-13-teeth-material-polyacetal-resin-sku-10251300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 114 teeth material steel SKU: 10228800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-114-teeth-material-steel-sku-10228800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 90 teeth material steel SKU: 10228200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-90-teeth-material-steel-sku-10228200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 80 teeth material steel SKU: 10228000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-80-teeth-material-steel-sku-10228000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 76 teeth material steel SKU: 10227600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-76-teeth-material-steel-sku-10227600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 72 teeth material steel SKU: 10227200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-72-teeth-material-steel-sku-10227200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 70 teeth material steel SKU: 10227000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-70-teeth-material-steel-sku-10227000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 65 teeth material steel SKU: 10226500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-65-teeth-material-steel-sku-10226500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 60 teeth material steel SKU: 10226000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-60-teeth-material-steel-sku-10226000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 57 teeth material steel SKU: 10225700](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-57-teeth-material-steel-sku-10225700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 54 teeth material steel SKU: 10225400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-54-teeth-material-steel-sku-10225400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 50 teeth material steel SKU: 10225000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-50-teeth-material-steel-sku-10225000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 48 teeth material steel SKU: 10224800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-48-teeth-material-steel-sku-10224800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 45 teeth material steel SKU: 10224500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-45-teeth-material-steel-sku-10224500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 42 teeth material steel SKU: 10224200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-42-teeth-material-steel-sku-10224200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 40 teeth material steel SKU: 10224000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-40-teeth-material-steel-sku-10224000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 38 teeth material steel SKU: 10223800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-38-teeth-material-steel-sku-10223800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 36 teeth material steel SKU: 10223600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-36-teeth-material-steel-sku-10223600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 35 teeth material steel SKU: 10223500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-35-teeth-material-steel-sku-10223500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 34 teeth material steel SKU: 10223400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-34-teeth-material-steel-sku-10223400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 32 teeth material steel SKU: 10223200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-32-teeth-material-steel-sku-10223200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 30 teeth material steel SKU: 10223000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-30-teeth-material-steel-sku-10223000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 28 teeth material steel SKU: 10222800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-28-teeth-material-steel-sku-10222800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 27 teeth material steel SKU: 10222700](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-27-teeth-material-steel-sku-10222700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 26 teeth material steel SKU: 10222600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-26-teeth-material-steel-sku-10222600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 25 teeth material steel SKU: 10222500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-25-teeth-material-steel-sku-10222500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 24 teeth material steel SKU: 10222400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-24-teeth-material-steel-sku-10222400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 23 teeth material steel SKU: 10222300](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-23-teeth-material-steel-sku-10222300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 22 teeth material steel SKU: 10222200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-22-teeth-material-steel-sku-10222200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 21 teeth material steel SKU: 10222100](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-21-teeth-material-steel-sku-10222100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 50 teeth material steel SKU: 10525000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-50-teeth-material-steel-sku-10525000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 48 teeth material steel SKU: 10524800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-48-teeth-material-steel-sku-10524800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 46 teeth material steel SKU: 10524600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-46-teeth-material-steel-sku-10524600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 45 teeth material steel SKU: 10524500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-45-teeth-material-steel-sku-10524500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 44 teeth material steel SKU: 10524400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-44-teeth-material-steel-sku-10524400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 42 teeth material steel SKU: 10524200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-42-teeth-material-steel-sku-10524200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 40 teeth material steel SKU: 10524000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-40-teeth-material-steel-sku-10524000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 38 teeth material steel SKU: 10523800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-38-teeth-material-steel-sku-10523800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 36 teeth material steel SKU: 10523600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-36-teeth-material-steel-sku-10523600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 35 teeth material steel SKU: 10523500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-35-teeth-material-steel-sku-10523500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 34 teeth material steel SKU: 10523400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-34-teeth-material-steel-sku-10523400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 32 teeth material steel SKU: 10523200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-32-teeth-material-steel-sku-10523200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 30 teeth material steel SKU: 10523000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-30-teeth-material-steel-sku-10523000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 29 teeth material steel SKU: 10522900](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-29-teeth-material-steel-sku-10522900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 28 teeth material steel SKU: 10522800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-28-teeth-material-steel-sku-10522800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 27 teeth material steel SKU: 10522700](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-27-teeth-material-steel-sku-10522700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 26 teeth material steel SKU: 10522600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-26-teeth-material-steel-sku-10522600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 25 teeth material steel SKU: 10522500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-25-teeth-material-steel-sku-10522500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 24 teeth material steel SKU: 10522400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-24-teeth-material-steel-sku-10522400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 23 teeth material steel SKU: 10522300](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-23-teeth-material-steel-sku-10522300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 22 teeth material steel SKU: 10522200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-22-teeth-material-steel-sku-10522200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 21 teeth material steel SKU: 10522100](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-21-teeth-material-steel-sku-10522100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 20 teeth material steel SKU: 10522000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-20-teeth-material-steel-sku-10522000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 19 teeth material steel SKU: 10521900](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-19-teeth-material-steel-sku-10521900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 18 teeth material steel SKU: 10521800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-18-teeth-material-steel-sku-10521800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 17 teeth material steel SKU: 10521700](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-17-teeth-material-steel-sku-10521700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 16 teeth material steel SKU: 10521600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-16-teeth-material-steel-sku-10521600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 15 teeth material steel SKU: 10521500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-15-teeth-material-steel-sku-10521500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 14 teeth material steel SKU: 10521400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-14-teeth-material-steel-sku-10521400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 13 teeth material steel SKU: 10521300](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-13-teeth-material-steel-sku-10521300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 12 teeth material steel SKU: 10521200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-12-teeth-material-steel-sku-10521200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 11 teeth material steel SKU: 10521100](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-11-teeth-material-steel-sku-10521100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 10 teeth material steel SKU: 10521000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-10-teeth-material-steel-sku-10521000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 9 teeth material steel SKU: 10520900](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-9-teeth-material-steel-sku-10520900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 8 teeth material steel SKU: 10520800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-8-teeth-material-steel-sku-10520800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 114 teeth material cast iron SKU: 10518800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-114-teeth-material-cast-iron-sku-10518800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 95 teeth material cast iron SKU: 10518300](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-95-teeth-material-cast-iron-sku-10518300/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 76 teeth material cast iron SKU: 10517600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-76-teeth-material-cast-iron-sku-10517600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 57 teeth material cast iron SKU: 10515700](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-57-teeth-material-cast-iron-sku-10515700/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 45 teeth material cast iron SKU: 10514500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-45-teeth-material-cast-iron-sku-10514500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 40 teeth material steel SKU: 10514000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-40-teeth-material-steel-sku-10514000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 38 teeth material steel SKU: 10513800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-38-teeth-material-steel-sku-10513800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 36 teeth material steel SKU: 10513600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-36-teeth-material-steel-sku-10513600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 35 teeth material steel SKU: 10513500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-35-teeth-material-steel-sku-10513500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 34 teeth material steel SKU: 10513400](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-34-teeth-material-steel-sku-10513400/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 32 teeth material steel SKU: 10513200](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-32-teeth-material-steel-sku-10513200/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 30 teeth material steel SKU: 10513000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-30-teeth-material-steel-sku-10513000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 29 teeth material steel SKU: 10512900](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-29-teeth-material-steel-sku-10512900/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 28 teeth material steel SKU: 10512800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-28-teeth-material-steel-sku-10512800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 27 teeth material steel SKU: 10512700](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-27-teeth-material-steel-sku-10512700/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 26 teeth material steel SKU: 10512600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-26-teeth-material-steel-sku-10512600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 25 teeth material steel SKU: 10512500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-25-teeth-material-steel-sku-10512500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 24 teeth material steel SKU: 10512400](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-24-teeth-material-steel-sku-10512400/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 23 teeth material steel SKU: 10512300](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-23-teeth-material-steel-sku-10512300/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 22 teeth material steel SKU: 10512200](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-22-teeth-material-steel-sku-10512200/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 21 teeth material steel SKU: 10512100](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-21-teeth-material-steel-sku-10512100/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 20 teeth material steel SKU: 10512000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-20-teeth-material-steel-sku-10512000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 19 teeth material steel SKU: 10511900](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-19-teeth-material-steel-sku-10511900/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 18 teeth material steel SKU: 10511800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-18-teeth-material-steel-sku-10511800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 17 teeth material steel SKU: 10511700](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-17-teeth-material-steel-sku-10511700/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 16 teeth material steel SKU: 10511600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-16-teeth-material-steel-sku-10511600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 15 teeth material steel SKU: 10511500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-15-teeth-material-steel-sku-10511500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 14 teeth material steel SKU: 10511400](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-14-teeth-material-steel-sku-10511400/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 13 teeth material steel SKU: 10511300](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-13-teeth-material-steel-sku-10511300/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 12 teeth material steel SKU: 10511200](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-12-teeth-material-steel-sku-10511200/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 11 teeth material steel SKU: 10511100](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-11-teeth-material-steel-sku-10511100/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 10 teeth material steel SKU: 10511000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-10-teeth-material-steel-sku-10511000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 9 teeth material steel SKU: 10510900](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-9-teeth-material-steel-sku-10510900/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 8 teeth material steel SKU: 10510800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-8-teeth-material-steel-sku-10510800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399130](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399125](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399123](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399121](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399120](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399119](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399118](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399117](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399116](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399115](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399113](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399112](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 25 teeth material polyacetal resin SKU: 10352500](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-25-teeth-material-polyacetal-resin-sku-10352500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 23 teeth material polyacetal resin SKU: 10352300](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-23-teeth-material-polyacetal-resin-sku-10352300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 21 teeth material polyacetal resin SKU: 10352100](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-21-teeth-material-polyacetal-resin-sku-10352100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 19 teeth material polyacetal resin SKU: 10351900](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-19-teeth-material-polyacetal-resin-sku-10351900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 17 teeth material polyacetal resin SKU: 10351700](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-17-teeth-material-polyacetal-resin-sku-10351700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 15 teeth material polyacetal resin SKU: 10351500](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-15-teeth-material-polyacetal-resin-sku-10351500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 13 teeth material polyacetal resin SKU: 10351300](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-13-teeth-material-polyacetal-resin-sku-10351300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 114 teeth material steel SKU: 10328800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-114-teeth-material-steel-sku-10328800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 90 teeth material steel SKU: 10328200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-90-teeth-material-steel-sku-10328200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 80 teeth material steel SKU: 10328000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-80-teeth-material-steel-sku-10328000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 76 teeth material steel SKU: 10327600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-76-teeth-material-steel-sku-10327600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 72 teeth material steel SKU: 10327200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-72-teeth-material-steel-sku-10327200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 70 teeth material steel SKU: 10327000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-70-teeth-material-steel-sku-10327000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 65 teeth material steel SKU: 10326500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-65-teeth-material-steel-sku-10326500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 60 teeth material steel SKU: 10326000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-60-teeth-material-steel-sku-10326000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 57 teeth material steel SKU: 10325700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-57-teeth-material-steel-sku-10325700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 54 teeth material steel SKU: 10325400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-54-teeth-material-steel-sku-10325400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 50 teeth material steel SKU: 10325000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-50-teeth-material-steel-sku-10325000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 48 teeth material steel SKU: 10324800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-48-teeth-material-steel-sku-10324800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581515](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581514](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581512](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581428](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581425](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581422](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581422/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581420](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581420/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581419](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581419/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581418](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581418/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581416](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581416/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581415](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581415/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581414](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581414/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581412](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581412/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581328](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581325](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581324](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581324/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581322](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581322/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581320](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581320/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581318](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581318/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581316](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581316/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581315](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581315/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581314](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581314/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581312](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581312/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581225](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581224](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581224/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581222](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581222/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581220](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581220/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581219](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581219/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581218](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581218/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581216](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581216/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581215](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581215/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581214](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581214/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581212](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581212/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581119](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581119/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581118](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581118/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581116](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581116/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581115](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581115/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581114](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581114/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581112](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581112/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581016](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581016/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581015](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581015/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581014](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581014/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581012](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581012/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRTG 08 B-1 1/2x5/16" 30 teeth material steel teeth hardened for taper bush type 2012 SKU: 10578130](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10578130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 28 teeth material steel teeth hardened for taper bush type 2012 SKU: 10578128](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10578128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 27 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578127](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 26 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578126](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 25 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578125](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 24 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578124](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 23 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578123](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 22 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578122](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 21 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578121](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 20 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578120](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 19 teeth material steel teeth hardened for taper bush type 1210 SKU: 10578119](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10578119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 18 teeth material steel teeth hardened for taper bush type 1210 SKU: 10578118](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10578118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 17 teeth material steel teeth hardened for taper bush type 1210 SKU: 10578117](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10578117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 16 teeth material steel teeth hardened for taper bush type 1108 SKU: 10578116](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-1108-sku-10578116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 15 teeth material steel teeth hardened for taper bush type 1008 SKU: 10578115](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10578115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 114 teeth material cast iron for taper bush type 2517 SKU: 10577188G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-114-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10577188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 95 teeth material cast iron for taper bush type 2012 SKU: 10577183G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-95-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10577183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 76 teeth material cast iron for taper bush type 2012 SKU: 10577176G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-76-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10577176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 76 teeth material steel for taper bush type 2012 SKU: 10577176](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-76-teeth-material-steel-for-taper-bush-type-2012-sku-10577176/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 57 teeth material cast iron for taper bush type 2012 SKU: 10577157G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-57-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10577157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 57 teeth material steel for taper bush type 2012 SKU: 10577157](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-57-teeth-material-steel-for-taper-bush-type-2012-sku-10577157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 45 teeth material steel for taper bush type 2012 SKU: 10577145](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-45-teeth-material-steel-for-taper-bush-type-2012-sku-10577145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 38 teeth material steel for taper bush type 2012 SKU: 10577138](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-38-teeth-material-steel-for-taper-bush-type-2012-sku-10577138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 30 teeth material steel for taper bush type 2012 SKU: 10577130](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-30-teeth-material-steel-for-taper-bush-type-2012-sku-10577130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 28 teeth material steel for taper bush type 2012 SKU: 10577128](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-28-teeth-material-steel-for-taper-bush-type-2012-sku-10577128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 27 teeth material steel for taper bush type 1610 SKU: 10577127](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-27-teeth-material-steel-for-taper-bush-type-1610-sku-10577127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 26 teeth material steel for taper bush type 1610 SKU: 10577126](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-26-teeth-material-steel-for-taper-bush-type-1610-sku-10577126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 25 teeth material steel for taper bush type 1610 SKU: 10577125](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-25-teeth-material-steel-for-taper-bush-type-1610-sku-10577125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 24 teeth material steel for taper bush type 1610 SKU: 10577124](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-24-teeth-material-steel-for-taper-bush-type-1610-sku-10577124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 23 teeth material steel for taper bush type 1610 SKU: 10577123](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-23-teeth-material-steel-for-taper-bush-type-1610-sku-10577123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 22 teeth material steel for taper bush type 1610 SKU: 10577122](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-22-teeth-material-steel-for-taper-bush-type-1610-sku-10577122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 21 teeth material steel for taper bush type 1610 SKU: 10577121](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-21-teeth-material-steel-for-taper-bush-type-1610-sku-10577121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 20 teeth material steel for taper bush type 1610 SKU: 10577120](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-20-teeth-material-steel-for-taper-bush-type-1610-sku-10577120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 19 teeth material steel for taper bush type 1210 SKU: 10577119](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-19-teeth-material-steel-for-taper-bush-type-1210-sku-10577119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 18 teeth material steel for taper bush type 1210 SKU: 10577118](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-18-teeth-material-steel-for-taper-bush-type-1210-sku-10577118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 17 teeth material steel for taper bush type 1210 SKU: 10577117](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-17-teeth-material-steel-for-taper-bush-type-1210-sku-10577117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 16 teeth material steel for taper bush type 1108 SKU: 10577116](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-16-teeth-material-steel-for-taper-bush-type-1108-sku-10577116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 15 teeth material steel for taper bush type 1008 SKU: 10577115](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-15-teeth-material-steel-for-taper-bush-type-1008-sku-10577115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 14 teeth material steel for taper bush type 1008 SKU: 10577114](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-14-teeth-material-steel-for-taper-bush-type-1008-sku-10577114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 25 teeth material polyacetal resin SKU: 10552500](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-25-teeth-material-polyacetal-resin-sku-10552500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 23 teeth material polyacetal resin SKU: 10552300](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-23-teeth-material-polyacetal-resin-sku-10552300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 21 teeth material polyacetal resin SKU: 10552100](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-21-teeth-material-polyacetal-resin-sku-10552100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 19 teeth material polyacetal resin SKU: 10551900](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-19-teeth-material-polyacetal-resin-sku-10551900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 17 teeth material polyacetal resin SKU: 10551700](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-17-teeth-material-polyacetal-resin-sku-10551700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 15 teeth material polyacetal resin SKU: 10551500](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-15-teeth-material-polyacetal-resin-sku-10551500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 13 teeth material polyacetal resin SKU: 10551300](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-13-teeth-material-polyacetal-resin-sku-10551300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 120 teeth material steel SKU: 10529000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-120-teeth-material-steel-sku-10529000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 114 teeth material steel SKU: 10528800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-114-teeth-material-steel-sku-10528800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 95 teeth material steel SKU: 10528300](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-95-teeth-material-steel-sku-10528300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 80 teeth material steel SKU: 10528000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-80-teeth-material-steel-sku-10528000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 76 teeth material steel SKU: 10527600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-76-teeth-material-steel-sku-10527600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 72 teeth material steel SKU: 10527200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-72-teeth-material-steel-sku-10527200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 70 teeth material steel SKU: 10527000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-70-teeth-material-steel-sku-10527000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 65 teeth material steel SKU: 10526500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-65-teeth-material-steel-sku-10526500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 60 teeth material steel SKU: 10526000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-60-teeth-material-steel-sku-10526000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 57 teeth material steel SKU: 10525700](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-57-teeth-material-steel-sku-10525700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 54 teeth material steel SKU: 10525400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-54-teeth-material-steel-sku-10525400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582338](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582335](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582332](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582330](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582328](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582325](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582324](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582324/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582322](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582322/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582320](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582320/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582319](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582319/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582238](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582235](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582232](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582230](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582228](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582225](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582224](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582224/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582222](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582222/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582220](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582220/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582219](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582219/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582218](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582218/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582216](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582216/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582138](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582135](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582132](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582130](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582125](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582122](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582122/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582120](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582120/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582119](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582119/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582118](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582118/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582116](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582116/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582038](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582035](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582032](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582030](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582028](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582028/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582025](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582024](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582024/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582022](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582022/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582020](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582020/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582019](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582019/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582018](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582018/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582016](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582016/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581938](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581935](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581935/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581932](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581932/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581930](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581930/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581928](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581928/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581925](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581925/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581924](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581924/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581922](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581922/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581920](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581920/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581919](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581919/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581918](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581918/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581916](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581916/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581838](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581838/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581835](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581835/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581832](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581832/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581830](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581830/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581828](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581828/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581825](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581825/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581824](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581824/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581822](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581822/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581820](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581820/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581819](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581819/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581818](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581818/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581816](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581816/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581732](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581732/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581730](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581730/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581728](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581728/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581725](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581725/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581724](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581724/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581722](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581722/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581720](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581720/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581719](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581719/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581718](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581718/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581716](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581716/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581715](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581715/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581632](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581632/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581630](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581630/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581628](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581628/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581625](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581625/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581624](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581624/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581622](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581622/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581620](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581620/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581619](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581619/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581618](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581618/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581616](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581616/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581615](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581615/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581532](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581530](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581528](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581525](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581524](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581524/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581522](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581522/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581520](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581519](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581518](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581516](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 35 teeth material steel SKU: 10613500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-35-teeth-material-steel-sku-10613500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 34 teeth material steel SKU: 10613400](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-34-teeth-material-steel-sku-10613400/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 32 teeth material steel SKU: 10613200](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-32-teeth-material-steel-sku-10613200/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 30 teeth material steel SKU: 10613000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-30-teeth-material-steel-sku-10613000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 28 teeth material steel SKU: 10612800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-28-teeth-material-steel-sku-10612800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 27 teeth material steel SKU: 10612700](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-27-teeth-material-steel-sku-10612700/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 26 teeth material steel SKU: 10612600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-26-teeth-material-steel-sku-10612600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 25 teeth material steel SKU: 10612500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-25-teeth-material-steel-sku-10612500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 24 teeth material steel SKU: 10612400](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-24-teeth-material-steel-sku-10612400/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 23 teeth material steel SKU: 10612300](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-23-teeth-material-steel-sku-10612300/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 22 teeth material steel SKU: 10612200](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-22-teeth-material-steel-sku-10612200/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 21 teeth material steel SKU: 10612100](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-21-teeth-material-steel-sku-10612100/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 20 teeth material steel SKU: 10612000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-20-teeth-material-steel-sku-10612000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 19 teeth material steel SKU: 10611900](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-19-teeth-material-steel-sku-10611900/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 18 teeth material steel SKU: 10611800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-18-teeth-material-steel-sku-10611800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 17 teeth material steel SKU: 10611700](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-17-teeth-material-steel-sku-10611700/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 16 teeth material steel SKU: 10611600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-16-teeth-material-steel-sku-10611600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 15 teeth material steel SKU: 10611500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-15-teeth-material-steel-sku-10611500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 14 teeth material steel SKU: 10611400](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-14-teeth-material-steel-sku-10611400/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 13 teeth material steel SKU: 10611300](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-13-teeth-material-steel-sku-10611300/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 12 teeth material steel SKU: 10611200](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-12-teeth-material-steel-sku-10611200/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 11 teeth material steel SKU: 10611100](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-11-teeth-material-steel-sku-10611100/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 10 teeth material steel SKU: 10611000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-10-teeth-material-steel-sku-10611000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 9 teeth material steel SKU: 10610900](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-9-teeth-material-steel-sku-10610900/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 8 teeth material steel SKU: 10610800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-8-teeth-material-steel-sku-10610800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 40 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599140](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-40-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599140/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 38 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599138](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-38-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599138/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 35 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599135](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-35-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599135/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 32 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599132](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-32-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599132/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599130](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 26 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599126](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-26-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599126/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599125](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599124](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599123](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599122](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599121](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599120](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599119](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599118](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599117](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599116](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599115](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599114](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599113](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599112](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 40 teeth material steel teeth induction hardened SKU: 10588140](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-40-teeth-material-steel-teeth-induction-hardened-sku-10588140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 38 teeth material steel teeth induction hardened SKU: 10588138](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-38-teeth-material-steel-teeth-induction-hardened-sku-10588138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 36 teeth material steel teeth induction hardened SKU: 10588136](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-36-teeth-material-steel-teeth-induction-hardened-sku-10588136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 35 teeth material steel teeth induction hardened SKU: 10588135](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-35-teeth-material-steel-teeth-induction-hardened-sku-10588135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 34 teeth material steel teeth induction hardened SKU: 10588134](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-34-teeth-material-steel-teeth-induction-hardened-sku-10588134/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 32 teeth material steel teeth induction hardened SKU: 10588132](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-32-teeth-material-steel-teeth-induction-hardened-sku-10588132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 30 teeth material steel teeth induction hardened SKU: 10588130](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-30-teeth-material-steel-teeth-induction-hardened-sku-10588130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 29 teeth material steel teeth induction hardened SKU: 10588129](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-29-teeth-material-steel-teeth-induction-hardened-sku-10588129/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 28 teeth material steel teeth induction hardened SKU: 10588128](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-28-teeth-material-steel-teeth-induction-hardened-sku-10588128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 27 teeth material steel teeth induction hardened SKU: 10588127](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-27-teeth-material-steel-teeth-induction-hardened-sku-10588127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 26 teeth material steel teeth induction hardened SKU: 10588126](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-26-teeth-material-steel-teeth-induction-hardened-sku-10588126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 25 teeth material steel teeth induction hardened SKU: 10588125](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-25-teeth-material-steel-teeth-induction-hardened-sku-10588125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 24 teeth material steel teeth induction hardened SKU: 10588124](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-24-teeth-material-steel-teeth-induction-hardened-sku-10588124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 23 teeth material steel teeth induction hardened SKU: 10588123](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-23-teeth-material-steel-teeth-induction-hardened-sku-10588123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 22 teeth material steel teeth induction hardened SKU: 10588122](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-22-teeth-material-steel-teeth-induction-hardened-sku-10588122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 21 teeth material steel teeth induction hardened SKU: 10588121](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-21-teeth-material-steel-teeth-induction-hardened-sku-10588121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 20 teeth material steel teeth induction hardened SKU: 10588120](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-20-teeth-material-steel-teeth-induction-hardened-sku-10588120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 19 teeth material steel teeth induction hardened SKU: 10588119](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-19-teeth-material-steel-teeth-induction-hardened-sku-10588119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 18 teeth material steel teeth induction hardened SKU: 10588118](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-18-teeth-material-steel-teeth-induction-hardened-sku-10588118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 17 teeth material steel teeth induction hardened SKU: 10588117](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-17-teeth-material-steel-teeth-induction-hardened-sku-10588117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 16 teeth material steel teeth induction hardened SKU: 10588116](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-16-teeth-material-steel-teeth-induction-hardened-sku-10588116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 15 teeth material steel teeth induction hardened SKU: 10588115](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-15-teeth-material-steel-teeth-induction-hardened-sku-10588115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 14 teeth material steel teeth induction hardened SKU: 10588114](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-14-teeth-material-steel-teeth-induction-hardened-sku-10588114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 13 teeth material steel teeth induction hardened SKU: 10588113](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-13-teeth-material-steel-teeth-induction-hardened-sku-10588113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 12 teeth material steel teeth induction hardened SKU: 10588112](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-12-teeth-material-steel-teeth-induction-hardened-sku-10588112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 11 teeth material steel teeth induction hardened SKU: 10588111](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-11-teeth-material-steel-teeth-induction-hardened-sku-10588111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 10 teeth material steel teeth induction hardened SKU: 10588110](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-10-teeth-material-steel-teeth-induction-hardened-sku-10588110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 9 teeth material steel teeth induction hardened SKU: 10588109](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-9-teeth-material-steel-teeth-induction-hardened-sku-10588109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 8 teeth material steel teeth induction hardened SKU: 10588108](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-8-teeth-material-steel-teeth-induction-hardened-sku-10588108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583038](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583035](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583032](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583030](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583028](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583028/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583025](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582538](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582535](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582532](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582530](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582528](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582525](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582524](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582524/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582522](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582522/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582520](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582519](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582438](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582435](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582432](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582430](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582430/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582428](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582425](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582424](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582424/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582422](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582422/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582420](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582420/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582419](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582419/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681024](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681020](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681019](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681018](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681018/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681016](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681016/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681015](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681015/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRTG 10 B-1 5/8x3/8" 30 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678130](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 28 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678128](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 27 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678127](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 26 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678126](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 25 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678125](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 24 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678124](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 23 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678123](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 22 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678122](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 21 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678121](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 20 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678120](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 19 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678119](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 18 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678118](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 17 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678117](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 16 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678116](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 15 teeth material steel teeth hardened for taper bush type 1210 SKU: 10678115](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10678115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 14 teeth material steel teeth hardened for taper bush type 1108 SKU: 10678114](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-14-teeth-material-steel-teeth-hardened-for-taper-bush-type-1108-sku-10678114/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 13 teeth material steel teeth hardened for taper bush type 1008 SKU: 10678113](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10678113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 114 teeth material cast iron for taper bush type 2517 SKU: 10677188G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-114-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10677188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 95 teeth material cast iron for taper bush type 2517 SKU: 10677183G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-95-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10677183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 76 teeth material cast iron for taper bush type 2012 SKU: 10677176G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-76-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10677176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 57 teeth material cast iron for taper bush type 2012 SKU: 10677157G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-57-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10677157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 57 teeth material steel for taper bush type 2012 SKU: 10677157](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-57-teeth-material-steel-for-taper-bush-type-2012-sku-10677157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 45 teeth material steel for taper bush type 2012 SKU: 10677145](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-45-teeth-material-steel-for-taper-bush-type-2012-sku-10677145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 38 teeth material steel for taper bush type 2012 SKU: 10677138](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-38-teeth-material-steel-for-taper-bush-type-2012-sku-10677138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 30 teeth material steel for taper bush type 2012 SKU: 10677130](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-30-teeth-material-steel-for-taper-bush-type-2012-sku-10677130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 28 teeth material steel for taper bush type 2012 SKU: 10677128](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-28-teeth-material-steel-for-taper-bush-type-2012-sku-10677128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 27 teeth material steel for taper bush type 2012 SKU: 10677127](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-27-teeth-material-steel-for-taper-bush-type-2012-sku-10677127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 26 teeth material steel for taper bush type 2012 SKU: 10677126](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-26-teeth-material-steel-for-taper-bush-type-2012-sku-10677126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 25 teeth material steel for taper bush type 2012 SKU: 10677125](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-25-teeth-material-steel-for-taper-bush-type-2012-sku-10677125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 24 teeth material steel for taper bush type 2012 SKU: 10677124](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-24-teeth-material-steel-for-taper-bush-type-2012-sku-10677124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 23 teeth material steel for taper bush type 1610 SKU: 10677123](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-23-teeth-material-steel-for-taper-bush-type-1610-sku-10677123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 22 teeth material steel for taper bush type 1610 SKU: 10677122](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-22-teeth-material-steel-for-taper-bush-type-1610-sku-10677122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 21 teeth material steel for taper bush type 1610 SKU: 10677121](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-21-teeth-material-steel-for-taper-bush-type-1610-sku-10677121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 20 teeth material steel for taper bush type 1610 SKU: 10677120](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-20-teeth-material-steel-for-taper-bush-type-1610-sku-10677120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 19 teeth material steel for taper bush type 1610 SKU: 10677119](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-19-teeth-material-steel-for-taper-bush-type-1610-sku-10677119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 18 teeth material steel for taper bush type 1610 SKU: 10677118](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-18-teeth-material-steel-for-taper-bush-type-1610-sku-10677118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 17 teeth material steel for taper bush type 1610 SKU: 10677117](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-17-teeth-material-steel-for-taper-bush-type-1610-sku-10677117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 16 teeth material steel for taper bush type 1610 SKU: 10677116](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-16-teeth-material-steel-for-taper-bush-type-1610-sku-10677116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 15 teeth material steel for taper bush type 1210 SKU: 10677115](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-15-teeth-material-steel-for-taper-bush-type-1210-sku-10677115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 14 teeth material steel for taper bush type 1108 SKU: 10677114](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-14-teeth-material-steel-for-taper-bush-type-1108-sku-10677114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 13 teeth material steel for taper bush type 1008 SKU: 10677113](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-13-teeth-material-steel-for-taper-bush-type-1008-sku-10677113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 114 teeth material steel SKU: 10628800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-114-teeth-material-steel-sku-10628800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 95 teeth material steel SKU: 10628300](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-95-teeth-material-steel-sku-10628300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 80 teeth material steel SKU: 10628000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-80-teeth-material-steel-sku-10628000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 76 teeth material steel SKU: 10627600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-76-teeth-material-steel-sku-10627600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 72 teeth material steel SKU: 10627200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-72-teeth-material-steel-sku-10627200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 70 teeth material steel SKU: 10627000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-70-teeth-material-steel-sku-10627000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 65 teeth material steel SKU: 10626500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-65-teeth-material-steel-sku-10626500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 60 teeth material steel SKU: 10626000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-60-teeth-material-steel-sku-10626000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 57 teeth material steel SKU: 10625700](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-57-teeth-material-steel-sku-10625700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 54 teeth material steel SKU: 10625400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-54-teeth-material-steel-sku-10625400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 50 teeth material steel SKU: 10625000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-50-teeth-material-steel-sku-10625000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 48 teeth material steel SKU: 10624800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-48-teeth-material-steel-sku-10624800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 46 teeth material steel SKU: 10624600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-46-teeth-material-steel-sku-10624600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 45 teeth material steel SKU: 10624500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-45-teeth-material-steel-sku-10624500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 44 teeth material steel SKU: 10624400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-44-teeth-material-steel-sku-10624400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 42 teeth material steel SKU: 10624200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-42-teeth-material-steel-sku-10624200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 40 teeth material steel SKU: 10624000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-40-teeth-material-steel-sku-10624000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 38 teeth material steel SKU: 10623800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-38-teeth-material-steel-sku-10623800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 36 teeth material steel SKU: 10623600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-36-teeth-material-steel-sku-10623600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 35 teeth material steel SKU: 10623500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-35-teeth-material-steel-sku-10623500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 34 teeth material steel SKU: 10623400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-34-teeth-material-steel-sku-10623400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 32 teeth material steel SKU: 10623200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-32-teeth-material-steel-sku-10623200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 30 teeth material steel SKU: 10623000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-30-teeth-material-steel-sku-10623000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 29 teeth material steel SKU: 10622900](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-29-teeth-material-steel-sku-10622900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 28 teeth material steel SKU: 10622800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-28-teeth-material-steel-sku-10622800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 27 teeth material steel SKU: 10622700](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-27-teeth-material-steel-sku-10622700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 26 teeth material steel SKU: 10622600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-26-teeth-material-steel-sku-10622600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 25 teeth material steel SKU: 10622500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-25-teeth-material-steel-sku-10622500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 24 teeth material steel SKU: 10622400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-24-teeth-material-steel-sku-10622400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 23 teeth material steel SKU: 10622300](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-23-teeth-material-steel-sku-10622300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 22 teeth material steel SKU: 10622200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-22-teeth-material-steel-sku-10622200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 21 teeth material steel SKU: 10622100](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-21-teeth-material-steel-sku-10622100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 20 teeth material steel SKU: 10622000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-20-teeth-material-steel-sku-10622000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 19 teeth material steel SKU: 10621900](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-19-teeth-material-steel-sku-10621900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 18 teeth material steel SKU: 10621800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-18-teeth-material-steel-sku-10621800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 17 teeth material steel SKU: 10621700](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-17-teeth-material-steel-sku-10621700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 16 teeth material steel SKU: 10621600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-16-teeth-material-steel-sku-10621600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 15 teeth material steel SKU: 10621500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-15-teeth-material-steel-sku-10621500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 14 teeth material steel SKU: 10621400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-14-teeth-material-steel-sku-10621400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 13 teeth material steel SKU: 10621300](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-13-teeth-material-steel-sku-10621300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 12 teeth material steel SKU: 10621200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-12-teeth-material-steel-sku-10621200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 11 teeth material steel SKU: 10621100](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-11-teeth-material-steel-sku-10621100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 10 teeth material steel SKU: 10621000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-10-teeth-material-steel-sku-10621000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 9 teeth material steel SKU: 10620900](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-9-teeth-material-steel-sku-10620900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 8 teeth material steel SKU: 10620800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-8-teeth-material-steel-sku-10620800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 114 teeth material cast iron SKU: 10618800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-114-teeth-material-cast-iron-sku-10618800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 95 teeth material cast iron SKU: 10618300](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-95-teeth-material-cast-iron-sku-10618300/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 76 teeth material cast iron SKU: 10617600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-76-teeth-material-cast-iron-sku-10617600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 57 teeth material cast iron SKU: 10615700](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-57-teeth-material-cast-iron-sku-10615700/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 45 teeth material cast iron SKU: 10614500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-45-teeth-material-cast-iron-sku-10614500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 40 teeth material steel SKU: 10614000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-40-teeth-material-steel-sku-10614000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 38 teeth material steel SKU: 10613800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-38-teeth-material-steel-sku-10613800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 36 teeth material steel SKU: 10613600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-36-teeth-material-steel-sku-10613600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682030](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682028](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682025](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682024](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682022](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682022/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682020](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682019](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681942](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681942/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681940](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681940/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681938](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681938/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681935](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681935/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681932](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681932/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681930](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681930/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681928](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681928/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681925](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681925/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681924](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681924/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681922](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681922/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681920](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681920/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681919](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681919/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681842](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681842/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681840](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681840/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681838](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681838/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681835](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681835/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681832](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681832/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681830](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681830/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681828](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681828/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681825](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681825/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681824](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681824/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681822](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681822/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681820](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681820/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681819](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681819/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681738](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681738/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681735](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681735/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681732](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681732/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681730](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681730/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681728](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681728/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681725](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681725/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681724](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681724/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681722](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681722/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681720](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681720/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681719](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681719/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681638](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681638/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681635](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681635/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681632](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681632/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681630](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681630/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681628](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681628/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681625](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681625/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681624](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681624/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681622](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681622/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681620](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681620/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681619](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681619/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681535](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681532](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681530](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681528](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681525](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681524](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681522](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681520](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681519](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681432](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681430](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681428](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681425](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681420](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681419](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681418](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681416](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681415](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681332](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681330](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681328](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681325](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681324](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681322](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681320](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681319](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681318](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681318/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681316](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681316/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681315](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681315/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681232](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681230](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681228](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681225](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681224](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681222](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681220](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681219](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681218](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681218/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681216](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681216/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681215](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681215/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681130](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681128](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681125](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681124](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681120](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681119](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681118](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681118/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681116](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681116/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681115](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681115/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699124](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699123](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699122](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699121](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699120](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699119](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699118](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699117](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699116](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699115](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699114](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699113](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699112](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 30 teeth material steel teeth induction hardened SKU: 10688130](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-30-teeth-material-steel-teeth-induction-hardened-sku-10688130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 28 teeth material steel teeth induction hardened SKU: 10688128](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-28-teeth-material-steel-teeth-induction-hardened-sku-10688128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 27 teeth material steel teeth induction hardened SKU: 10688127](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-27-teeth-material-steel-teeth-induction-hardened-sku-10688127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 26 teeth material steel teeth induction hardened SKU: 10688126](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-26-teeth-material-steel-teeth-induction-hardened-sku-10688126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 25 teeth material steel teeth induction hardened SKU: 10688125](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-25-teeth-material-steel-teeth-induction-hardened-sku-10688125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 24 teeth material steel teeth induction hardened SKU: 10688124](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-24-teeth-material-steel-teeth-induction-hardened-sku-10688124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 23 teeth material steel teeth induction hardened SKU: 10688123](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-23-teeth-material-steel-teeth-induction-hardened-sku-10688123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 22 teeth material steel teeth induction hardened SKU: 10688122](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-22-teeth-material-steel-teeth-induction-hardened-sku-10688122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 21 teeth material steel teeth induction hardened SKU: 10688121](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-21-teeth-material-steel-teeth-induction-hardened-sku-10688121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 20 teeth material steel teeth induction hardened SKU: 10688120](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-20-teeth-material-steel-teeth-induction-hardened-sku-10688120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 19 teeth material steel teeth induction hardened SKU: 10688119](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-19-teeth-material-steel-teeth-induction-hardened-sku-10688119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 18 teeth material steel teeth induction hardened SKU: 10688118](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-18-teeth-material-steel-teeth-induction-hardened-sku-10688118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 17 teeth material steel teeth induction hardened SKU: 10688117](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-17-teeth-material-steel-teeth-induction-hardened-sku-10688117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 16 teeth material steel teeth induction hardened SKU: 10688116](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-16-teeth-material-steel-teeth-induction-hardened-sku-10688116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 15 teeth material steel teeth induction hardened SKU: 10688115](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-15-teeth-material-steel-teeth-induction-hardened-sku-10688115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 14 teeth material steel teeth induction hardened SKU: 10688114](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-14-teeth-material-steel-teeth-induction-hardened-sku-10688114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 13 teeth material steel teeth induction hardened SKU: 10688113](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-13-teeth-material-steel-teeth-induction-hardened-sku-10688113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 12 teeth material steel teeth induction hardened SKU: 10688112](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-12-teeth-material-steel-teeth-induction-hardened-sku-10688112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 11 teeth material steel teeth induction hardened SKU: 10688111](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-11-teeth-material-steel-teeth-induction-hardened-sku-10688111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 10 teeth material steel teeth induction hardened SKU: 10688110](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-10-teeth-material-steel-teeth-induction-hardened-sku-10688110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 9 teeth material steel teeth induction hardened SKU: 10688109](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-9-teeth-material-steel-teeth-induction-hardened-sku-10688109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 8 teeth material steel teeth induction hardened SKU: 10688108](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-8-teeth-material-steel-teeth-induction-hardened-sku-10688108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682542](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682542/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682540](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682540/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682538](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682538/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682535](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682532](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682530](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682528](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682525](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682524](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682522](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682520](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682519](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682442](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682442/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682440](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682440/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682438](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682438/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682435](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682435/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682432](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682430](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682428](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682425](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682424](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682424/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682422](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682422/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682420](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682419](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682342](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682342/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682340](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682340/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682338](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682338/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682335](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682335/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682332](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682330](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682328](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682325](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682324](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682322](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682320](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682319](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682242](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682242/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682240](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682240/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682238](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682238/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682235](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682235/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682232](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682230](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682228](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682225](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682224](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682222](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682220](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682219](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682142](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682142/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682140](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682140/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682138](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682138/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682135](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682135/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682132](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682132/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682130](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682128](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682125](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682124](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682122](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682122/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682120](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682119](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682042](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682042/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682040](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682040/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682038](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682038/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682035](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682035/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682032](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682032/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRT 12 B-1 3/4x7/16" 38 teeth material steel for taper bush type 2517 SKU: 10777138](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-38-teeth-material-steel-for-taper-bush-type-2517-sku-10777138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 30 teeth material steel for taper bush type 2517 SKU: 10777130](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-30-teeth-material-steel-for-taper-bush-type-2517-sku-10777130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 28 teeth material steel for taper bush type 2517 SKU: 10777128](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-28-teeth-material-steel-for-taper-bush-type-2517-sku-10777128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 27 teeth material steel for taper bush type 2517 SKU: 10777127](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-27-teeth-material-steel-for-taper-bush-type-2517-sku-10777127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 26 teeth material steel for taper bush type 2517 SKU: 10777126](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-26-teeth-material-steel-for-taper-bush-type-2517-sku-10777126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 25 teeth material steel for taper bush type 2517 SKU: 10777125](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-25-teeth-material-steel-for-taper-bush-type-2517-sku-10777125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 24 teeth material steel for taper bush type 2517 SKU: 10777124](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-24-teeth-material-steel-for-taper-bush-type-2517-sku-10777124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 23 teeth material steel for taper bush type 2517 SKU: 10777123](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-23-teeth-material-steel-for-taper-bush-type-2517-sku-10777123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 22 teeth material steel for taper bush type 2517 SKU: 10777122](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-22-teeth-material-steel-for-taper-bush-type-2517-sku-10777122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 21 teeth material steel for taper bush type 2517 SKU: 10777121](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-21-teeth-material-steel-for-taper-bush-type-2517-sku-10777121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 20 teeth material steel for taper bush type 2012 SKU: 10777120](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-20-teeth-material-steel-for-taper-bush-type-2012-sku-10777120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 19 teeth material steel for taper bush type 2012 SKU: 10777119](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-19-teeth-material-steel-for-taper-bush-type-2012-sku-10777119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 18 teeth material steel for taper bush type 2012 SKU: 10777118](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-18-teeth-material-steel-for-taper-bush-type-2012-sku-10777118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 17 teeth material steel for taper bush type 1610 SKU: 10777117](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-17-teeth-material-steel-for-taper-bush-type-1610-sku-10777117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 16 teeth material steel for taper bush type 1610 SKU: 10777116](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-16-teeth-material-steel-for-taper-bush-type-1610-sku-10777116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 15 teeth material steel for taper bush type 1610 SKU: 10777115](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-15-teeth-material-steel-for-taper-bush-type-1610-sku-10777115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 14 teeth material steel for taper bush type 1610 SKU: 10777114](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-14-teeth-material-steel-for-taper-bush-type-1610-sku-10777114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 13 teeth material steel for taper bush type 1210 SKU: 10777113](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-13-teeth-material-steel-for-taper-bush-type-1210-sku-10777113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 95 teeth material steel SKU: 10728300](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-95-teeth-material-steel-sku-10728300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 80 teeth material steel SKU: 10728000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-80-teeth-material-steel-sku-10728000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 76 teeth material steel SKU: 10727600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-76-teeth-material-steel-sku-10727600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 72 teeth material steel SKU: 10727200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-72-teeth-material-steel-sku-10727200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 70 teeth material steel SKU: 10727000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-70-teeth-material-steel-sku-10727000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 65 teeth material steel SKU: 10726500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-65-teeth-material-steel-sku-10726500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 60 teeth material steel SKU: 10726000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-60-teeth-material-steel-sku-10726000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 57 teeth material steel SKU: 10725700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-57-teeth-material-steel-sku-10725700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 54 teeth material steel SKU: 10725400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-54-teeth-material-steel-sku-10725400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 50 teeth material steel SKU: 10725000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-50-teeth-material-steel-sku-10725000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 48 teeth material steel SKU: 10724800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-48-teeth-material-steel-sku-10724800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 47 teeth material steel SKU: 10724700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-47-teeth-material-steel-sku-10724700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 46 teeth material steel SKU: 10724600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-46-teeth-material-steel-sku-10724600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 45 teeth material steel SKU: 10724500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-45-teeth-material-steel-sku-10724500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 44 teeth material steel SKU: 10724400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-44-teeth-material-steel-sku-10724400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 42 teeth material steel SKU: 10724200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-42-teeth-material-steel-sku-10724200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 40 teeth material steel SKU: 10724000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-40-teeth-material-steel-sku-10724000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 38 teeth material steel SKU: 10723800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-38-teeth-material-steel-sku-10723800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 36 teeth material steel SKU: 10723600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-36-teeth-material-steel-sku-10723600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 35 teeth material steel SKU: 10723500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-35-teeth-material-steel-sku-10723500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 34 teeth material steel SKU: 10723400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-34-teeth-material-steel-sku-10723400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 32 teeth material steel SKU: 10723200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-32-teeth-material-steel-sku-10723200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 30 teeth material steel SKU: 10723000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-30-teeth-material-steel-sku-10723000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 29 teeth material steel SKU: 10722900](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-29-teeth-material-steel-sku-10722900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 28 teeth material steel SKU: 10722800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-28-teeth-material-steel-sku-10722800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 27 teeth material steel SKU: 10722700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-27-teeth-material-steel-sku-10722700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 26 teeth material steel SKU: 10722600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-26-teeth-material-steel-sku-10722600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 25 teeth material steel SKU: 10722500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-25-teeth-material-steel-sku-10722500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 24 teeth material steel SKU: 10722400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-24-teeth-material-steel-sku-10722400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 23 teeth material steel SKU: 10722300](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-23-teeth-material-steel-sku-10722300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 22 teeth material steel SKU: 10722200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-22-teeth-material-steel-sku-10722200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 21 teeth material steel SKU: 10722100](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-21-teeth-material-steel-sku-10722100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 20 teeth material steel SKU: 10722000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-20-teeth-material-steel-sku-10722000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 19 teeth material steel SKU: 10721900](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-19-teeth-material-steel-sku-10721900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 18 teeth material steel SKU: 10721800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-18-teeth-material-steel-sku-10721800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 17 teeth material steel SKU: 10721700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-17-teeth-material-steel-sku-10721700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 16 teeth material steel SKU: 10721600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-16-teeth-material-steel-sku-10721600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 15 teeth material steel SKU: 10721500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-15-teeth-material-steel-sku-10721500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 14 teeth material steel SKU: 10721400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-14-teeth-material-steel-sku-10721400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 13 teeth material steel SKU: 10721300](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-13-teeth-material-steel-sku-10721300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 12 teeth material steel SKU: 10721200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-12-teeth-material-steel-sku-10721200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 11 teeth material steel SKU: 10721100](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-11-teeth-material-steel-sku-10721100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 10 teeth material steel SKU: 10721000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-10-teeth-material-steel-sku-10721000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 9 teeth material steel SKU: 10720900](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-9-teeth-material-steel-sku-10720900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 8 teeth material steel SKU: 10720800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-8-teeth-material-steel-sku-10720800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 114 teeth material cast iron SKU: 10718800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-114-teeth-material-cast-iron-sku-10718800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 95 teeth material cast iron SKU: 10718300](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-95-teeth-material-cast-iron-sku-10718300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 76 teeth material cast iron SKU: 10717600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-76-teeth-material-cast-iron-sku-10717600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 57 teeth material cast iron SKU: 10715700](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-57-teeth-material-cast-iron-sku-10715700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 50 teeth material steel SKU: 10715000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-50-teeth-material-steel-sku-10715000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 48 teeth material steel SKU: 10714800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-48-teeth-material-steel-sku-10714800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 45 teeth material cast iron SKU: 10714500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-45-teeth-material-cast-iron-sku-10714500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 40 teeth material steel SKU: 10714000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-40-teeth-material-steel-sku-10714000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 38 teeth material steel SKU: 10713800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-38-teeth-material-steel-sku-10713800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 36 teeth material steel SKU: 10713600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-36-teeth-material-steel-sku-10713600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 35 teeth material steel SKU: 10713500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-35-teeth-material-steel-sku-10713500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 34 teeth material steel SKU: 10713400](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-34-teeth-material-steel-sku-10713400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 32 teeth material steel SKU: 10713200](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-32-teeth-material-steel-sku-10713200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 30 teeth material steel SKU: 10713000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-30-teeth-material-steel-sku-10713000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 28 teeth material steel SKU: 10712800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-28-teeth-material-steel-sku-10712800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 27 teeth material steel SKU: 10712700](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-27-teeth-material-steel-sku-10712700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 26 teeth material steel SKU: 10712600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-26-teeth-material-steel-sku-10712600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 25 teeth material steel SKU: 10712500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-25-teeth-material-steel-sku-10712500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 24 teeth material steel SKU: 10712400](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-24-teeth-material-steel-sku-10712400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 23 teeth material steel SKU: 10712300](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-23-teeth-material-steel-sku-10712300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 22 teeth material steel SKU: 10712200](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-22-teeth-material-steel-sku-10712200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 21 teeth material steel SKU: 10712100](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-21-teeth-material-steel-sku-10712100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 20 teeth material steel SKU: 10712000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-20-teeth-material-steel-sku-10712000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 19 teeth material steel SKU: 10711900](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-19-teeth-material-steel-sku-10711900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 18 teeth material steel SKU: 10711800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-18-teeth-material-steel-sku-10711800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 17 teeth material steel SKU: 10711700](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-17-teeth-material-steel-sku-10711700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 16 teeth material steel SKU: 10711600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-16-teeth-material-steel-sku-10711600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 15 teeth material steel SKU: 10711500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-15-teeth-material-steel-sku-10711500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 14 teeth material steel SKU: 10711400](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-14-teeth-material-steel-sku-10711400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 13 teeth material steel SKU: 10711300](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-13-teeth-material-steel-sku-10711300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 12 teeth material steel SKU: 10711200](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-12-teeth-material-steel-sku-10711200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 11 teeth material steel SKU: 10711100](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-11-teeth-material-steel-sku-10711100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 10 teeth material steel SKU: 10711000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-10-teeth-material-steel-sku-10711000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 9 teeth material steel SKU: 10710900](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-9-teeth-material-steel-sku-10710900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 8 teeth material steel SKU: 10710800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-8-teeth-material-steel-sku-10710800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699130](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699125](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781828](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781828/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781825](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781825/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781742](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781742/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781740](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781740/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781738](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781738/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781735](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781735/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781732](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781732/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781730](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781730/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781728](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781728/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781725](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781725/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781640](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781640/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781638](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781638/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781635](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781635/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781632](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781632/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781630](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781630/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781628](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781628/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781625](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781625/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781624](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781624/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781622](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781622/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781620](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781620/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781619](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781619/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781540](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781540/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781538](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781538/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781535](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781532](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781530](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781528](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781525](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781524](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781522](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781520](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781519](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781440](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781440/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781438](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781438/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781435](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781435/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781432](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781430](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781428](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781425](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781424](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781424/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781422](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781422/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781420](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781419](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781338](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781338/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781335](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781335/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781332](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781330](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781328](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781325](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781324](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781322](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781320](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781319](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781235](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781235/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781232](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781230](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781228](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781225](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781224](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781222](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781220](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781219](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781132](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781132/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781130](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781128](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781125](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781124](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781120](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781119](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781032](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781032/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781030](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781028](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781025](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781024](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781020](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781019](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRTG 12 B-1 3/4x7/16" 30 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778130](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 28 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778128](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 27 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778127](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 26 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778126](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 25 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778125](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 24 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778124](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 23 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778123](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 22 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778122](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 21 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778121](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 20 teeth material steel teeth hardened for taper bush type 2012 SKU: 10778120](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10778120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 19 teeth material steel teeth hardened for taper bush type 2012 SKU: 10778119](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10778119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 18 teeth material steel teeth hardened for taper bush type 2012 SKU: 10778118](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10778118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 17 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778117](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 16 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778116](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 15 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778115](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 14 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778114](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-14-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778114/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 13 teeth material steel teeth hardened for taper bush type 1210 SKU: 10778113](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10778113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 95 teeth material cast iron for taper bush type 2525 SKU: 10777188G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-2525-sku-10777188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 95 teeth material cast iron for taper bush type 2517 SKU: 10777183G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 76 teeth material cast iron for taper bush type 2517 SKU: 10777176G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-76-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 57 teeth material cast iron for taper bush type 2517 SKU: 10777157G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-57-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 57 teeth material steel for taper bush type 2517 SKU: 10777157](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-57-teeth-material-steel-for-taper-bush-type-2517-sku-10777157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 45 teeth material cast iron for taper bush type 2517 SKU: 10777145G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-45-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777145g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 45 teeth material steel for taper bush type 2517 SKU: 10777145](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-45-teeth-material-steel-for-taper-bush-type-2517-sku-10777145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRG with hub 12 B-1 3/4x7/16" 24 teeth material steel teeth induction hardened SKU: 10788124](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-24-teeth-material-steel-teeth-induction-hardened-sku-10788124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 23 teeth material steel teeth induction hardened SKU: 10788123](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-23-teeth-material-steel-teeth-induction-hardened-sku-10788123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 22 teeth material steel teeth induction hardened SKU: 10788122](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-22-teeth-material-steel-teeth-induction-hardened-sku-10788122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 21 teeth material steel teeth induction hardened SKU: 10788121](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-21-teeth-material-steel-teeth-induction-hardened-sku-10788121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 20 teeth material steel teeth induction hardened SKU: 10788120](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-20-teeth-material-steel-teeth-induction-hardened-sku-10788120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 19 teeth material steel teeth induction hardened SKU: 10788119](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-19-teeth-material-steel-teeth-induction-hardened-sku-10788119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 18 teeth material steel teeth induction hardened SKU: 10788118](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-18-teeth-material-steel-teeth-induction-hardened-sku-10788118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 17 teeth material steel teeth induction hardened SKU: 10788117](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-17-teeth-material-steel-teeth-induction-hardened-sku-10788117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 16 teeth material steel teeth induction hardened SKU: 10788116](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-16-teeth-material-steel-teeth-induction-hardened-sku-10788116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 15 teeth material steel teeth induction hardened SKU: 10788115](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-15-teeth-material-steel-teeth-induction-hardened-sku-10788115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 14 teeth material steel teeth induction hardened SKU: 10788114](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-14-teeth-material-steel-teeth-induction-hardened-sku-10788114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 13 teeth material steel teeth induction hardened SKU: 10788113](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-13-teeth-material-steel-teeth-induction-hardened-sku-10788113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 12 teeth material steel teeth induction hardened SKU: 10788112](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-12-teeth-material-steel-teeth-induction-hardened-sku-10788112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 11 teeth material steel teeth induction hardened SKU: 10788111](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-11-teeth-material-steel-teeth-induction-hardened-sku-10788111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 10 teeth material steel teeth induction hardened SKU: 10788110](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-10-teeth-material-steel-teeth-induction-hardened-sku-10788110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 9 teeth material steel teeth induction hardened SKU: 10788109](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-9-teeth-material-steel-teeth-induction-hardened-sku-10788109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 8 teeth material steel teeth induction hardened SKU: 10788108](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-8-teeth-material-steel-teeth-induction-hardened-sku-10788108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782550](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782550/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782548](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782548/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782545](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782545/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782542](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782542/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782540](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782540/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782538](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782538/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782535](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782532](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782530](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782528](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782525](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782450](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782450/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782448](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782448/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782445](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782445/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782442](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782442/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782440](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782440/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782438](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782438/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782435](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782435/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782432](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782430](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782428](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782425](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782350](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782350/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782348](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782348/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782345](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782345/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782342](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782342/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782340](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782340/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782338](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782338/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782335](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782335/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782332](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782330](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782328](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782325](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782250](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782250/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782248](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782248/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782245](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782245/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782242](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782242/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782240](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782240/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782238](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782238/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782235](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782235/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782232](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782230](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782228](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782225](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782150](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782150/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782148](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782148/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782145](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782145/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782142](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782142/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782140](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782140/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782138](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782138/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782135](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782135/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782132](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782132/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782130](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782128](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782125](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782050](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782050/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782048](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782048/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782045](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782045/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782042](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782042/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782040](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782040/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782038](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782038/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782035](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782035/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782032](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782032/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782030](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782028](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782025](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781950](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781950/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781948](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781948/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781945](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781945/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781942](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781942/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781940](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781940/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781938](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781938/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781935](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781935/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781932](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781932/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781930](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781930/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781928](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781928/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781925](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781925/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781842](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781842/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781840](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781840/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781838](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781838/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781835](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781835/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781832](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781832/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781830](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781830/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRT 16 B-1 1"x17.02mm 13 teeth material steel for taper bush type 1610 SKU: 10877113](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-13-teeth-material-steel-for-taper-bush-type-1610-sku-10877113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 114 teeth, material steel SKU: 10828800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-114-teeth-material-steel-sku-10828800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 95 teeth material steel SKU: 10828300](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-95-teeth-material-steel-sku-10828300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 80 teeth material steel SKU: 10828000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-80-teeth-material-steel-sku-10828000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 76 teeth material steel SKU: 10827600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-76-teeth-material-steel-sku-10827600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 70 teeth material steel SKU: 10827000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-70-teeth-material-steel-sku-10827000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 60 teeth material steel SKU: 10826000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-60-teeth-material-steel-sku-10826000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 57 teeth material steel SKU: 10825700](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-57-teeth-material-steel-sku-10825700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 54 teeth material steel SKU: 10825400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-54-teeth-material-steel-sku-10825400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 50 teeth material steel SKU: 10825000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-50-teeth-material-steel-sku-10825000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 48 teeth material steel SKU: 10824800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-48-teeth-material-steel-sku-10824800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 45 teeth material steel SKU: 10824500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-45-teeth-material-steel-sku-10824500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 44 teeth material steel SKU: 10824400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-44-teeth-material-steel-sku-10824400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 42 teeth material steel SKU: 10824200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-42-teeth-material-steel-sku-10824200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 40 teeth material steel SKU: 10824000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-40-teeth-material-steel-sku-10824000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 38 teeth material steel SKU: 10823800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-38-teeth-material-steel-sku-10823800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 36 teeth material steel SKU: 10823600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-36-teeth-material-steel-sku-10823600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 35 teeth material steel SKU: 10823500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-35-teeth-material-steel-sku-10823500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 34 teeth material steel SKU: 10823400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-34-teeth-material-steel-sku-10823400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 32 teeth material steel SKU: 10823200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-32-teeth-material-steel-sku-10823200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 30 teeth material steel SKU: 10823000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-30-teeth-material-steel-sku-10823000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 28 teeth material steel SKU: 10822800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-28-teeth-material-steel-sku-10822800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 27 teeth material steel SKU: 10822700](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-27-teeth-material-steel-sku-10822700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 26 teeth material steel SKU: 10822600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-26-teeth-material-steel-sku-10822600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 25 teeth material steel SKU: 10822500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-25-teeth-material-steel-sku-10822500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 24 teeth material steel SKU: 10822400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-24-teeth-material-steel-sku-10822400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 23 teeth material steel SKU: 10822300](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-23-teeth-material-steel-sku-10822300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 22 teeth material steel SKU: 10822200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-22-teeth-material-steel-sku-10822200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 21 teeth material steel SKU: 10822100](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-21-teeth-material-steel-sku-10822100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 20 teeth material steel SKU: 10822000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-20-teeth-material-steel-sku-10822000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 19 teeth material steel SKU: 10821900](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-19-teeth-material-steel-sku-10821900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 18 teeth material steel SKU: 10821800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-18-teeth-material-steel-sku-10821800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 17 teeth material steel SKU: 10821700](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-17-teeth-material-steel-sku-10821700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 16 teeth material steel SKU: 10821600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-16-teeth-material-steel-sku-10821600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 15 teeth material steel SKU: 10821500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-15-teeth-material-steel-sku-10821500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 14 teeth material steel SKU: 10821400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-14-teeth-material-steel-sku-10821400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 13 teeth material steel SKU: 10821300](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-13-teeth-material-steel-sku-10821300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 12 teeth material steel SKU: 10821200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-12-teeth-material-steel-sku-10821200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 11 teeth material steel SKU: 10821100](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-11-teeth-material-steel-sku-10821100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 10 teeth material steel SKU: 10821000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-10-teeth-material-steel-sku-10821000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 9 teeth material steel SKU: 10820900](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-9-teeth-material-steel-sku-10820900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 8 teeth material steel SKU: 10820800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-8-teeth-material-steel-sku-10820800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 114 teeth material cast iron SKU: 10818800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-114-teeth-material-cast-iron-sku-10818800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 95 teeth material cast iron SKU: 10818300](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-95-teeth-material-cast-iron-sku-10818300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 76 teeth material cast iron SKU: 10817600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-76-teeth-material-cast-iron-sku-10817600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 57 teeth material cast iron SKU: 10815700](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-57-teeth-material-cast-iron-sku-10815700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 45 teeth material cast iron SKU: 10814500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-45-teeth-material-cast-iron-sku-10814500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 38 teeth material steel SKU: 10813800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-38-teeth-material-steel-sku-10813800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 36 teeth material steel SKU: 10813600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-36-teeth-material-steel-sku-10813600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 35 teeth material steel SKU: 10813500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-35-teeth-material-steel-sku-10813500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 34 teeth material steel SKU: 10813400](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-34-teeth-material-steel-sku-10813400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 32 teeth material steel SKU: 10813200](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-32-teeth-material-steel-sku-10813200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 30 teeth material steel SKU: 10813000](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-30-teeth-material-steel-sku-10813000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 28 teeth material steel SKU: 10812800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-28-teeth-material-steel-sku-10812800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 27 teeth material steel SKU: 10812700](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-27-teeth-material-steel-sku-10812700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 26 teeth material steel SKU: 10812600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-26-teeth-material-steel-sku-10812600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 25 teeth material steel SKU: 10812500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-25-teeth-material-steel-sku-10812500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 24 teeth material steel SKU: 10812400](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-24-teeth-material-steel-sku-10812400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 23 teeth material steel SKU: 10812300](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-23-teeth-material-steel-sku-10812300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 22 teeth material steel SKU: 10812200](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-22-teeth-material-steel-sku-10812200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 21 teeth material steel SKU: 10812100](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-21-teeth-material-steel-sku-10812100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 20 teeth material steel SKU: 10812000](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-20-teeth-material-steel-sku-10812000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 19 teeth material steel SKU: 10811900](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-19-teeth-material-steel-sku-10811900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 18 teeth material steel SKU: 10811800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-18-teeth-material-steel-sku-10811800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 17 teeth material steel SKU: 10811700](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-17-teeth-material-steel-sku-10811700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 16 teeth material steel SKU: 10811600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-16-teeth-material-steel-sku-10811600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 15 teeth material steel SKU: 10811500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-15-teeth-material-steel-sku-10811500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 14 teeth material steel SKU: 10811400](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-14-teeth-material-steel-sku-10811400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 13 teeth material steel SKU: 10811300](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-13-teeth-material-steel-sku-10811300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 12 teeth material steel SKU: 10811200](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-12-teeth-material-steel-sku-10811200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 11 teeth material steel SKU: 10811100](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-11-teeth-material-steel-sku-10811100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 10 teeth material steel SKU: 10811000](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-10-teeth-material-steel-sku-10811000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 9 teeth material steel SKU: 10810900](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-9-teeth-material-steel-sku-10810900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 8 teeth material steel SKU: 10810800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-8-teeth-material-steel-sku-10810800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/4x7/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799130](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-4x7-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799125](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799124](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799123](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799122](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799121](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799120](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799119](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799118](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799117](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799116](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799115](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799114](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799113](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799112](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 40 teeth material steel teeth induction hardened SKU: 10788140](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-40-teeth-material-steel-teeth-induction-hardened-sku-10788140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 38 teeth material steel teeth induction hardened SKU: 10788138](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-38-teeth-material-steel-teeth-induction-hardened-sku-10788138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 36 teeth material steel teeth induction hardened SKU: 10788136](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-36-teeth-material-steel-teeth-induction-hardened-sku-10788136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 35 teeth material steel teeth induction hardened SKU: 10788135](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-35-teeth-material-steel-teeth-induction-hardened-sku-10788135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 34 teeth material steel teeth induction hardened SKU: 10788134](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-34-teeth-material-steel-teeth-induction-hardened-sku-10788134/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 32 teeth material steel teeth induction hardened SKU: 10788132](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-32-teeth-material-steel-teeth-induction-hardened-sku-10788132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 30 teeth material steel teeth induction hardened SKU: 10788130](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-30-teeth-material-steel-teeth-induction-hardened-sku-10788130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 28 teeth material steel teeth induction hardened SKU: 10788128](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-28-teeth-material-steel-teeth-induction-hardened-sku-10788128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 27 teeth material steel teeth induction hardened SKU: 10788127](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-27-teeth-material-steel-teeth-induction-hardened-sku-10788127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 26 teeth material steel teeth induction hardened SKU: 10788126](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-26-teeth-material-steel-teeth-induction-hardened-sku-10788126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 25 teeth material steel teeth induction hardened SKU: 10788125](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-25-teeth-material-steel-teeth-induction-hardened-sku-10788125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881645](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881645/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881642](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881642/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881640](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881640/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881638](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881638/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881635](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881635/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881632](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881632/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881630](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881630/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881628](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881628/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881625](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881625/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881550](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881550/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881548](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881548/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881545](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881545/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881542](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881542/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881540](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881540/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881538](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881535](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881532](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881530](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881528](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881525](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881450](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881450/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881448](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881448/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881445](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881445/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881442](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881442/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881440](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881440/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881438](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881435](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881432](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881430](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881430/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881428](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881425](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881350](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881350/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881348](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881348/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881345](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881345/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881342](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881342/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881340](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881340/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881338](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881335](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881332](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881330](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881328](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881325](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881242](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881242/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881240](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881240/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881238](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881235](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881232](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881230](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881228](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881225](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881142](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881142/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881140](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881140/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881138](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881135](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881132](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881130](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881128](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881128/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881125](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRTG 16 B-1 1"x17.02mm 30 teeth material steel teeth hardened for taper bush type 3020 SKU: 10878130](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-3020-sku-10878130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 28 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878128](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 27 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878127](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 26 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878126](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 25 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878125](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 24 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878124](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 23 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878123](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 22 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878122](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 21 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878121](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 20 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878120](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 19 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878119](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 18 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878118](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 17 teeth material steel teeth hardened for taper bush type 2012 SKU: 10878117](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10878117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 16 teeth material steel teeth hardened for taper bush type 2012 SKU: 10878116](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10878116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 15 teeth material steel teeth hardened for taper bush type 1610 SKU: 10878115](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10878115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 14 teeth material steel teeth hardened for taper bush type 1610 SKU: 10878114](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-14-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10878114/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 13 teeth material steel teeth hardened for taper bush type 1610 SKU: 10878113](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10878113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 114 teeth material cast iron for taper bush type 3030 SKU: 10877188G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-114-teeth-material-cast-iron-for-taper-bush-type-3030-sku-10877188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 95 teeth material cast iron for taper bush type 3020 SKU: 10877183G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-95-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 76 teeth material cast iron for taper bush type 3020 SKU: 10877176G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 57 teeth material cast iron for taper bush type 3020 SKU: 10877157G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-57-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 57 teeth material steel for taper bush type 3020 SKU: 10877157](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-57-teeth-material-steel-for-taper-bush-type-3020-sku-10877157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 45 teeth material cast iron for taper bush type 3020 SKU: 10877145G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-45-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877145g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 45 teeth material steel for taper bush type 3020 SKU: 10877145](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-45-teeth-material-steel-for-taper-bush-type-3020-sku-10877145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 38 teeth material cast iron for taper bush type 3020 SKU: 10877138G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-38-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877138g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 38 teeth material steel for taper bush type 3020 SKU: 10877138](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-38-teeth-material-steel-for-taper-bush-type-3020-sku-10877138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 30 teeth material steel for taper bush type 3020 SKU: 10877130](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-30-teeth-material-steel-for-taper-bush-type-3020-sku-10877130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 28 teeth material steel for taper bush type 2517 SKU: 10877128](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-28-teeth-material-steel-for-taper-bush-type-2517-sku-10877128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 27 teeth material steel for taper bush type 2517 SKU: 10877127](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-27-teeth-material-steel-for-taper-bush-type-2517-sku-10877127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 26 teeth material steel for taper bush type 2517 SKU: 10877126](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-26-teeth-material-steel-for-taper-bush-type-2517-sku-10877126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 25 teeth material steel for taper bush type 2517 SKU: 10877125](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-25-teeth-material-steel-for-taper-bush-type-2517-sku-10877125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 24 teeth material steel for taper bush type 2517 SKU: 10877124](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-24-teeth-material-steel-for-taper-bush-type-2517-sku-10877124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 23 teeth material steel for taper bush type 2517 SKU: 10877123](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-23-teeth-material-steel-for-taper-bush-type-2517-sku-10877123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 22 teeth material steel for taper bush type 2517 SKU: 10877122](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-22-teeth-material-steel-for-taper-bush-type-2517-sku-10877122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 21 teeth material steel for taper bush type 2517 SKU: 10877121](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-21-teeth-material-steel-for-taper-bush-type-2517-sku-10877121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 20 teeth material steel for taper bush type 2517 SKU: 10877120](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-20-teeth-material-steel-for-taper-bush-type-2517-sku-10877120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 19 teeth material steel for taper bush type 2517 SKU: 10877119](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-19-teeth-material-steel-for-taper-bush-type-2517-sku-10877119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 18 teeth material steel for taper bush type 2517 SKU: 10877118](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-18-teeth-material-steel-for-taper-bush-type-2517-sku-10877118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 17 teeth material steel for taper bush type 2012 SKU: 10877117](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-17-teeth-material-steel-for-taper-bush-type-2012-sku-10877117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 16 teeth material steel for taper bush type 2012 SKU: 10877116](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-16-teeth-material-steel-for-taper-bush-type-2012-sku-10877116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 15 teeth material steel for taper bush typ 1610 SKU: 10877115](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-15-teeth-material-steel-for-taper-bush-typ-1610-sku-10877115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 14 teeth material steel for taper bush type 1610 SKU: 10877114](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-14-teeth-material-steel-for-taper-bush-type-1610-sku-10877114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882550](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882550/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882548](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882548/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882545](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882545/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882542](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882542/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882540](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882540/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882538](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882535](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882532](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882530](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882528](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882525](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882450](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882450/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882448](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882448/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882445](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882445/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882442](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882442/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882440](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882440/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882438](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882435](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882432](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882430](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882430/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882428](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882425](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882350](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882350/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882348](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882348/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882345](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882345/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882342](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882342/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882340](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882340/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882338](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882335](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882332](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882330](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882328](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882325](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882250](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882250/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882248](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882248/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882245](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882245/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882242](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882242/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882240](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882240/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882238](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882235](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882232](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882230](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882228](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882225](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882150](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882150/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882148](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882148/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882145](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882145/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882142](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882142/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882140](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882140/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882138](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882135](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882132](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882130](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882128](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882128/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882125](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882050](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882050/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882048](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882048/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882045](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882045/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882042](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882042/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882040](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882040/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882038](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882035](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882032](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882030](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882028](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882028/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882025](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881950](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881950/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881948](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881948/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881945](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881945/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881942](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881942/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881940](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881940/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881938](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881935](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881935/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881932](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881932/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881930](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881930/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881928](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881928/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881925](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881925/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881850](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881850/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881848](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881848/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881845](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881845/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881842](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881842/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881840](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881840/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881838](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881838/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881835](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881835/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881832](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881832/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881830](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881830/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881828](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881828/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881825](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881825/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881750](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881750/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881745](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881745/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881742](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881742/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881740](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881740/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881738](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881738/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881735](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881735/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881732](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881732/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881730](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881730/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881728](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881728/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881725](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881725/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881650](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881650/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881648](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881648/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 19 teeth material steel for taper bush typ 2517 SKU: 10977119](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-19-teeth-material-steel-for-taper-bush-typ-2517-sku-10977119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 18 teeth material steel for taper bush typ 2517 SKU: 10977118](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-18-teeth-material-steel-for-taper-bush-typ-2517-sku-10977118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 17 teeth material steel for taper bush typ 2517 SKU: 10977117](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-17-teeth-material-steel-for-taper-bush-typ-2517-sku-10977117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 16 teeth material steel for taper bush typ 2517 SKU: 10977116](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-16-teeth-material-steel-for-taper-bush-typ-2517-sku-10977116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 15 teeth material steel for taper bush typ 2517 SKU: 10977115](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-15-teeth-material-steel-for-taper-bush-typ-2517-sku-10977115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 14 teeth material steel for taper bush typ 2012 SKU: 10977114](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-14-teeth-material-steel-for-taper-bush-typ-2012-sku-10977114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 13 teeth material steel for taper bush typ 2012 SKU: 10977113](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-13-teeth-material-steel-for-taper-bush-typ-2012-sku-10977113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 57 teeth material steel SKU: 10925700](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-57-teeth-material-steel-sku-10925700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 54 teeth material steel SKU: 10925400](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-54-teeth-material-steel-sku-10925400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 48 teeth material steel SKU: 10924800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-48-teeth-material-steel-sku-10924800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 45 teeth material steel SKU: 10924500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-45-teeth-material-steel-sku-10924500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 40 teeth material steel SKU: 10924000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-40-teeth-material-steel-sku-10924000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 38 teeth material steel SKU: 10923800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-38-teeth-material-steel-sku-10923800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 35 teeth material steel SKU: 10923500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-35-teeth-material-steel-sku-10923500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 30 teeth material steel SKU: 10923000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-30-teeth-material-steel-sku-10923000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 27 teeth material steel SKU: 10922700](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-27-teeth-material-steel-sku-10922700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 25 teeth material steel SKU: 10922500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-25-teeth-material-steel-sku-10922500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 24 teeth material steel SKU: 10922400](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-24-teeth-material-steel-sku-10922400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 23 teeth material steel SKU: 10922300](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-23-teeth-material-steel-sku-10922300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 22 teeth material steel SKU: 10922200](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-22-teeth-material-steel-sku-10922200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 21 teeth material steel SKU: 10922100](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-21-teeth-material-steel-sku-10922100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 20 teeth material steel SKU: 10922000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-sku-10922000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 19 teeth material steel SKU: 10921900](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-sku-10921900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 18 teeth material steel SKU: 10921800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-sku-10921800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 17 teeth material steel SKU: 10921700](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-sku-10921700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 16 teeth material steel SKU: 10921600](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-sku-10921600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 15 teeth material steel SKU: 10921500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-sku-10921500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 14 teeth material steel SKU: 10921400](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-sku-10921400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 13 teeth material steel SKU: 10921300](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-sku-10921300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 12 teeth material steel SKU: 10921200](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-sku-10921200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 11 teeth material steel SKU: 10921100](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-sku-10921100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 10 teeth material steel SKU: 10921000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-sku-10921000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 9 teeth material steel SKU: 10920900](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-9-teeth-material-steel-sku-10920900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 8 teeth material steel SKU: 10920800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-8-teeth-material-steel-sku-10920800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 76 teeth material cast iron SKU: 10917600](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-76-teeth-material-cast-iron-sku-10917600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 57 teeth material cast iron SKU: 10915700](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-57-teeth-material-cast-iron-sku-10915700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 45 teeth material cast iron SKU: 10914500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-45-teeth-material-cast-iron-sku-10914500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 38 teeth material cast iron SKU: 10913800](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-38-teeth-material-cast-iron-sku-10913800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 35 teeth material steel SKU: 10913500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-35-teeth-material-steel-sku-10913500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 30 teeth material steel SKU: 10913000](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-30-teeth-material-steel-sku-10913000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 27 teeth material steel SKU: 10912700](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-27-teeth-material-steel-sku-10912700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 25 teeth material steel SKU: 10912500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-25-teeth-material-steel-sku-10912500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 23 teeth material steel SKU: 10912300](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-23-teeth-material-steel-sku-10912300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 21 teeth material steel SKU: 10912100](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-21-teeth-material-steel-sku-10912100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 20 teeth material steel SKU: 10912000](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-sku-10912000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 19 teeth material steel SKU: 10911900](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-sku-10911900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 18 teeth material steel SKU: 10911800](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-sku-10911800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 17 teeth material steel SKU: 10911700](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-sku-10911700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 16 teeth material steel SKU: 10911600](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-sku-10911600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 15 teeth material steel SKU: 10911500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-sku-10911500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 14 teeth material steel SKU: 10911400](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-sku-10911400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 13 teeth material steel SKU: 10911300](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-sku-10911300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 12 teeth material steel SKU: 10911200](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-sku-10911200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 11 teeth material steel SKU: 10911100](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-sku-10911100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 10 teeth material steel SKU: 10911000](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-sku-10911000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 9 teeth material steel SKU: 10910900](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steel-sku-10910900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 8 teeth material steel SKU: 10910800](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-8-teeth-material-steel-sku-10910800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899130](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899125](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899124](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899123](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899122](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899121](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899120](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899119](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899118](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899117](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899116](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899115](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899114](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899113](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899112](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 40 teeth material steel teeth induction hardened SKU: 10888140](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-40-teeth-material-steel-teeth-induction-hardened-sku-10888140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 38 teeth material steel teeth induction hardened SKU: 10888138](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-38-teeth-material-steel-teeth-induction-hardened-sku-10888138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 36 teeth material steel teeth induction hardened SKU: 10888136](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-36-teeth-material-steel-teeth-induction-hardened-sku-10888136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 35 teeth material steel teeth induction hardened SKU: 10888135](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-35-teeth-material-steel-teeth-induction-hardened-sku-10888135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 34 teeth material steel teeth induction hardened SKU: 10888134](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-34-teeth-material-steel-teeth-induction-hardened-sku-10888134/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 32 teeth material steel teeth induction hardened SKU: 10888132](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-32-teeth-material-steel-teeth-induction-hardened-sku-10888132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 30 teeth material steel teeth induction hardened SKU: 10888130](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-30-teeth-material-steel-teeth-induction-hardened-sku-10888130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 28 teeth material steel teeth induction hardened SKU: 10888128](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-28-teeth-material-steel-teeth-induction-hardened-sku-10888128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 27 teeth material steel teeth induction hardened SKU: 10888127](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-27-teeth-material-steel-teeth-induction-hardened-sku-10888127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 26 teeth material steel teeth induction hardened SKU: 10888126](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-26-teeth-material-steel-teeth-induction-hardened-sku-10888126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 25 teeth material steel teeth induction hardened SKU: 10888125](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-25-teeth-material-steel-teeth-induction-hardened-sku-10888125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 24 teeth material steel teeth induction hardened SKU: 10888124](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-24-teeth-material-steel-teeth-induction-hardened-sku-10888124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 23 teeth material steel teeth induction hardened SKU: 10888123](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-23-teeth-material-steel-teeth-induction-hardened-sku-10888123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 22 teeth material steel teeth induction hardened SKU: 10888122](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-22-teeth-material-steel-teeth-induction-hardened-sku-10888122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 21 teeth material steel teeth induction hardened SKU: 10888121](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-21-teeth-material-steel-teeth-induction-hardened-sku-10888121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 20 teeth material steel teeth induction hardened SKU: 10888120](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-20-teeth-material-steel-teeth-induction-hardened-sku-10888120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 19 teeth material steel teeth induction hardened SKU: 10888119](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-19-teeth-material-steel-teeth-induction-hardened-sku-10888119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 18 teeth material steel teeth induction hardened SKU: 10888118](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-18-teeth-material-steel-teeth-induction-hardened-sku-10888118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 17 teeth material steel teeth induction hardened SKU: 10888117](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-17-teeth-material-steel-teeth-induction-hardened-sku-10888117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 16 teeth material steel teeth induction hardened SKU: 10888116](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-16-teeth-material-steel-teeth-induction-hardened-sku-10888116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 15 teeth material steel teeth induction hardened SKU: 10888115](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-15-teeth-material-steel-teeth-induction-hardened-sku-10888115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 14 teeth material steel teeth induction hardened SKU: 10888114](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-14-teeth-material-steel-teeth-induction-hardened-sku-10888114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 13 teeth material steel teeth induction hardened SKU: 10888113](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-13-teeth-material-steel-teeth-induction-hardened-sku-10888113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 12 teeth material steel teeth induction hardened SKU: 10888112](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-12-teeth-material-steel-teeth-induction-hardened-sku-10888112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 11 teeth material steel teeth induction hardened SKU: 10888111](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-11-teeth-material-steel-teeth-induction-hardened-sku-10888111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 10 teeth material steel teeth induction hardened SKU: 10888110](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-10-teeth-material-steel-teeth-induction-hardened-sku-10888110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 9 teeth material steel teeth induction hardened SKU: 10888109](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-9-teeth-material-steel-teeth-induction-hardened-sku-10888109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 8 teeth material steel teeth induction hardened SKU: 10888108](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-8-teeth-material-steel-teeth-induction-hardened-sku-10888108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981742](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981742/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981740](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981740/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981738](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981738/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981670](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981670/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981665](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981665/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981660](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981660/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981650](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981650/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981648](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981648/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981645](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981645/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981642](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981642/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981640](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981640/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981638](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981638/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981560](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981560/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981550](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981550/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981548](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981548/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981545](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981545/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981542](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981542/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981540](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981540/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981538](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981535](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981532](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981460](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981460/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981450](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981450/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981448](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981448/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981445](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981445/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981442](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981442/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981440](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981440/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981438](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981435](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981432](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981360](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981360/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981350](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981350/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981348](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981348/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981345](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981345/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981342](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981342/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981340](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981340/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981338](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981335](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981332](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981330](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981328](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981325](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981260](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981260/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981250](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981250/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981248](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981248/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981245](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981245/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981242](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981242/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981240](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981240/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981238](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981235](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981232](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981230](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981228](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981225](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981160](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981160/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981150](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981150/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981145](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981145/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981142](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981142/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981140](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981140/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981138](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981135](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981132](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981130](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981128](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981128/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981125](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981038](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981035](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981032](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981030](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981025](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980938](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980935](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980935/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980932](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980932/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980930](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980930/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980925](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980925/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 30 teeth material steel teeth hardened for taper bush type 3020 SKU: 10978130](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-3020-sku-10978130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 27 teeth material steel teeth hardened for taper bush type 3020 SKU: 10978127](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-3020-sku-10978127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 25 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978125](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 23 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978123](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 21 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978121](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 19 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978119](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 17 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978117](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 15 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978115](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 13 teeth material steel teeth hardened for taper bush type 2012 SKU: 10978113](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10978113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 76 teeth material cast iron for taper bush typ 3020 SKU: 10977176G](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-76-teeth-material-cast-iron-for-taper-bush-typ-3020-sku-10977176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 76 teeth material steel for taper bush typ 3020 SKU: 10977176](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-76-teeth-material-steel-for-taper-bush-typ-3020-sku-10977176/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 57 teeth material cast iron for taper bush typ 3020 SKU: 10977157G](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-57-teeth-material-cast-iron-for-taper-bush-typ-3020-sku-10977157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 57 teeth material steel for taper bush typ 3020 SKU: 10977157](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-57-teeth-material-steel-for-taper-bush-typ-3020-sku-10977157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 45 teeth material steel for taper bush typ 3020 SKU: 10977145](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-45-teeth-material-steel-for-taper-bush-typ-3020-sku-10977145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 38 teeth material cast iron for taper bush typ 3020 SKU: 10977138G](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-38-teeth-material-cast-iron-for-taper-bush-typ-3020-sku-10977138g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 38 teeth material steel for taper bush typ 3020 SKU: 10977138](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-38-teeth-material-steel-for-taper-bush-typ-3020-sku-10977138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 36 teeth material steel for taper bush typ 3020 SKU: 10977136](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-36-teeth-material-steel-for-taper-bush-typ-3020-sku-10977136/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 30 teeth material steel for taper bush typ 3020 SKU: 10977130](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-30-teeth-material-steel-for-taper-bush-typ-3020-sku-10977130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 27 teeth material steel for taper bush typ 3020 SKU: 10977127](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-27-teeth-material-steel-for-taper-bush-typ-3020-sku-10977127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 25 teeth material steel for taper bush typ 2517 SKU: 10977125](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-25-teeth-material-steel-for-taper-bush-typ-2517-sku-10977125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 24 teeth material steel for taper bush typ 2517 SKU: 10977124](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-24-teeth-material-steel-for-taper-bush-typ-2517-sku-10977124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 23 teeth material steel for taper bush typ 2517 SKU: 10977123](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-23-teeth-material-steel-for-taper-bush-typ-2517-sku-10977123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 22 teeth material steel for taper bush typ 2517 SKU: 10977122](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-22-teeth-material-steel-for-taper-bush-typ-2517-sku-10977122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 21 teeth material steel for taper bush typ 2517 SKU: 10977121](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-21-teeth-material-steel-for-taper-bush-typ-2517-sku-10977121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 20 teeth material steel for taper bush typ 2517 SKU: 10977120](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-20-teeth-material-steel-for-taper-bush-typ-2517-sku-10977120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 28 teeth material steel SKU: 12012800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-28-teeth-material-steel-sku-12012800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 27 teeth material steel SKU: 12012700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-27-teeth-material-steel-sku-12012700/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 26 teeth material steel SKU: 12012600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-26-teeth-material-steel-sku-12012600/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 25 teeth material steel SKU: 12012500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-25-teeth-material-steel-sku-12012500/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 24 teeth material steel SKU: 12012400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-24-teeth-material-steel-sku-12012400/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 23 teeth material steel SKU: 12012300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-23-teeth-material-steel-sku-12012300/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 22 teeth material steel SKU: 12012200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-22-teeth-material-steel-sku-12012200/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 21 teeth material steel SKU: 12012100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-21-teeth-material-steel-sku-12012100/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 20 teeth material steel SKU: 12012000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-20-teeth-material-steel-sku-12012000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 19 teeth material steel SKU: 12011900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-19-teeth-material-steel-sku-12011900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 18 teeth material steel SKU: 12011800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-18-teeth-material-steel-sku-12011800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 17 teeth material steel SKU: 12011700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-17-teeth-material-steel-sku-12011700/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 16 teeth material steel SKU: 12011600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-16-teeth-material-steel-sku-12011600/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 15 teeth material steel SKU: 12011500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-15-teeth-material-steel-sku-12011500/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 14 teeth material steel SKU: 12011400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-14-teeth-material-steel-sku-12011400/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 13 teeth material steel SKU: 12011300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-13-teeth-material-steel-sku-12011300/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 12 teeth material steel SKU: 12011200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-12-teeth-material-steel-sku-12011200/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 11 teeth material steel SKU: 12011100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-11-teeth-material-steel-sku-12011100/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 10 teeth material steel SKU: 12011000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-10-teeth-material-steel-sku-12011000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 9 teeth material steel SKU: 12010900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-9-teeth-material-steel-sku-12010900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 8 teeth material steel SKU: 12010800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-8-teeth-material-steel-sku-12010800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRT 24 B-1 1 1/2" x 1" 57 teeth material cast iron for taper bush typ 3030 SKU: 11077157G](https://maedler.in/product/sprocket-krt-24-b-1-1-1-2-x-1-57-teeth-material-cast-iron-for-taper-bush-typ-3030-sku-11077157g/): Material: Grey cast iron GG25. The teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 24 B-1 1 1/2" x 1" 38 teeth material cast iron for taper bush typ 3030 SKU: 11077138G](https://maedler.in/product/sprocket-krt-24-b-1-1-1-2-x-1-38-teeth-material-cast-iron-for-taper-bush-typ-3030-sku-11077138g/): Material: Grey cast iron GG25. The teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 57 teeth material steel SKU: 11025700](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-57-teeth-material-steel-sku-11025700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 54 teeth material steel SKU: 11025400](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-54-teeth-material-steel-sku-11025400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 48 teeth material steel SKU: 11024800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-48-teeth-material-steel-sku-11024800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 45 teeth material steel SKU: 11024500](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-45-teeth-material-steel-sku-11024500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 38 teeth material steel SKU: 11023800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-38-teeth-material-steel-sku-11023800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 35 teeth material steel SKU: 11023500](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-35-teeth-material-steel-sku-11023500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 30 teeth material steel SKU: 11023000](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-30-teeth-material-steel-sku-11023000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 28 teeth material steel SKU: 11022800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-28-teeth-material-steel-sku-11022800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 24 teeth material steel SKU: 11022400](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-24-teeth-material-steel-sku-11022400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 22 teeth material steel SKU: 11022200](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-22-teeth-material-steel-sku-11022200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 20 teeth material steel SKU: 11022000](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-20-teeth-material-steel-sku-11022000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 18 teeth material steel SKU: 11021800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-18-teeth-material-steel-sku-11021800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 16 teeth material steel SKU: 11021600](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-16-teeth-material-steel-sku-11021600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 15 teeth material steel SKU: 11021500](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-15-teeth-material-steel-sku-11021500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 14 teeth material steel SKU: 11021400](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-14-teeth-material-steel-sku-11021400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 13 teeth material steel SKU: 11021300](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-13-teeth-material-steel-sku-11021300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 12 teeth material steel SKU: 11021200](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-12-teeth-material-steel-sku-11021200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 11 teeth material steel SKU: 11021100](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-11-teeth-material-steel-sku-11021100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 10 teeth material steel SKU: 11021000](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-10-teeth-material-steel-sku-11021000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 57 teeth material cast iron SKU: 11015700](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-57-teeth-material-cast-iron-sku-11015700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 45 teeth material cast iron SKU: 11014500](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-45-teeth-material-cast-iron-sku-11014500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 38 teeth material steel SKU: 11013800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-38-teeth-material-steel-sku-11013800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 30 teeth material steel SKU: 11013000](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-30-teeth-material-steel-sku-11013000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 28 teeth material steel SKU: 11012800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-28-teeth-material-steel-sku-11012800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 25 teeth material steel SKU: 11012500](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-25-teeth-material-steel-sku-11012500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 23 teeth material steel SKU: 11012300](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-23-teeth-material-steel-sku-11012300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 21 teeth material steel SKU: 11012100](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-21-teeth-material-steel-sku-11012100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 20 teeth material steel SKU: 11012000](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-20-teeth-material-steel-sku-11012000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 19 teeth material steel SKU: 11011900](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-19-teeth-material-steel-sku-11011900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 18 teeth material steel SKU: 11011800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-18-teeth-material-steel-sku-11011800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 17 teeth material steel SKU: 11011700](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-17-teeth-material-steel-sku-11011700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 16 teeth material steel SKU: 11011600](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-16-teeth-material-steel-sku-11011600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 15 teeth material steel SKU: 11011500](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-15-teeth-material-steel-sku-11011500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 14 teeth material steel SKU: 11011400](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-14-teeth-material-steel-sku-11011400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 13 teeth material steel SKU: 11011300](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-13-teeth-material-steel-sku-11011300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 12 teeth material steel SKU: 11011200](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-12-teeth-material-steel-sku-11011200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 11 teeth material steel SKU: 11011100](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-11-teeth-material-steel-sku-11011100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 10 teeth material steel SKU: 11011000](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-10-teeth-material-steel-sku-11011000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 8 teeth material steel SKU: 11010800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-8-teeth-material-steel-sku-11010800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999125](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999120](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999115](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999113](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999112](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982070](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982070/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982065](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982065/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982060](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982060/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982050](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982050/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982048](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982048/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982045](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982045/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982042](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982042/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982040](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982040/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982038](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981970](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981970/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981965](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981965/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981960](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981960/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981950](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981950/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981948](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981948/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981945](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981945/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981942](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981942/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981940](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981940/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981938](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981870](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981870/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981865](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981865/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981860](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981860/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981850](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981850/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981848](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981848/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981845](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981845/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981842](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981842/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981840](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981840/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981838](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981838/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981770](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981770/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981765](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981765/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981760](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981760/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981750](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981750/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981748](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981748/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981745](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981745/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 13 teeth material steel SKU: 12141300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-13-teeth-material-steel-sku-12141300/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 114 teeth material steel SKU: 12128800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-114-teeth-material-steel-sku-12128800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 95 teeth material steel SKU: 12128300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-95-teeth-material-steel-sku-12128300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 76 teeth material steel SKU: 12127600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-76-teeth-material-steel-sku-12127600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 57 teeth material steel SKU: 12125700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-57-teeth-material-steel-sku-12125700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 54 teeth material steel SKU: 12125400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-54-teeth-material-steel-sku-12125400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 48 teeth material steel SKU: 12124800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-48-teeth-material-steel-sku-12124800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 45 teeth material steel SKU: 12124500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-45-teeth-material-steel-sku-12124500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 40 teeth material steel SKU: 12124000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-40-teeth-material-steel-sku-12124000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 38 teeth material steel SKU: 12123800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-38-teeth-material-steel-sku-12123800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 35 teeth material steel SKU: 12123500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-35-teeth-material-steel-sku-12123500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 32 teeth material steel SKU: 12123200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-32-teeth-material-steel-sku-12123200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 30 teeth material steel SKU: 12123000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-30-teeth-material-steel-sku-12123000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 28 teeth material steel SKU: 12122800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-28-teeth-material-steel-sku-12122800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 27 teeth material steel SKU: 12122700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-27-teeth-material-steel-sku-12122700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 26 teeth material steel SKU: 12122600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-26-teeth-material-steel-sku-12122600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 25 teeth material steel SKU: 12122500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-25-teeth-material-steel-sku-12122500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 24 teeth material steel SKU: 12122400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-24-teeth-material-steel-sku-12122400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 23 teeth material steel SKU: 12122300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-23-teeth-material-steel-sku-12122300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 21 teeth material steel SKU: 12122100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-21-teeth-material-steel-sku-12122100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 20 teeth material steel SKU: 12122000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-20-teeth-material-steel-sku-12122000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 19 teeth material steel SKU: 12121900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-19-teeth-material-steel-sku-12121900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 18 teeth material steel SKU: 12121800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-18-teeth-material-steel-sku-12121800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 17 teeth material steel SKU: 12121700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-17-teeth-material-steel-sku-12121700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 16 teeth material steel SKU: 12121600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-16-teeth-material-steel-sku-12121600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 15 teeth material steel SKU: 12121500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-15-teeth-material-steel-sku-12121500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 14 teeth material steel SKU: 12121400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-14-teeth-material-steel-sku-12121400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 13 teeth material steel SKU: 12121300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-13-teeth-material-steel-sku-12121300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 12 teeth material steel SKU: 12121200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-12-teeth-material-steel-sku-12121200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 11 teeth material steel SKU: 12121100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-11-teeth-material-steel-sku-12121100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 76 teeth material cast iron SKU: 12117600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-76-teeth-material-cast-iron-sku-12117600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 57 teeth material cast iron SKU: 12115700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-57-teeth-material-cast-iron-sku-12115700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 45 teeth material cast iron SKU: 12114500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-45-teeth-material-cast-iron-sku-12114500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 40 teeth material steel SKU: 12114000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-40-teeth-material-steel-sku-12114000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 38 teeth material steel SKU: 12113800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-38-teeth-material-steel-sku-12113800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 35 teeth material steel SKU: 12113500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-35-teeth-material-steel-sku-12113500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 32 teeth material steel SKU: 12113200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-32-teeth-material-steel-sku-12113200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 30 teeth material steel SKU: 12113000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-30-teeth-material-steel-sku-12113000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 28 teeth material steel SKU: 12112800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-28-teeth-material-steel-sku-12112800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 27 teeth material steel SKU: 12112700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-27-teeth-material-steel-sku-12112700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 26 teeth material steel SKU: 12112600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-26-teeth-material-steel-sku-12112600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 25 teeth material steel SKU: 12112500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-25-teeth-material-steel-sku-12112500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 24 teeth material steel SKU: 12112400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-24-teeth-material-steel-sku-12112400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 23 teeth material steel SKU: 12112300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-23-teeth-material-steel-sku-12112300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 22 teeth material steel SKU: 12112200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-22-teeth-material-steel-sku-12112200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 21 teeth material steel SKU: 12112100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-21-teeth-material-steel-sku-12112100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 20 teeth material steel SKU: 12112000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-20-teeth-material-steel-sku-12112000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 19 teeth material steel SKU: 12111900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-19-teeth-material-steel-sku-12111900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 18 teeth material steel SKU: 12111800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-18-teeth-material-steel-sku-12111800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 17 teeth material steel SKU: 12111700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-17-teeth-material-steel-sku-12111700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 16 teeth material steel SKU: 12111600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-16-teeth-material-steel-sku-12111600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 15 teeth material steel SKU: 12111500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-15-teeth-material-steel-sku-12111500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 14 teeth material steel SKU: 12111400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-14-teeth-material-steel-sku-12111400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 13 teeth material steel SKU: 12111300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-13-teeth-material-steel-sku-12111300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 12 teeth material steel SKU: 12111200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-12-teeth-material-steel-sku-12111200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 11 teeth material steel SKU: 12111100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-11-teeth-material-steel-sku-12111100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 10 teeth material steel SKU: 12111000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-10-teeth-material-steel-sku-12111000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 9 teeth material steel SKU: 12110900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-9-teeth-material-steel-sku-12110900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 8 teeth material steel SKU: 12110800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-8-teeth-material-steel-sku-12110800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 76 teeth material steel SKU: 12027600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-76-teeth-material-steel-sku-12027600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 65 teeth material steel SKU: 12026500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-65-teeth-material-steel-sku-12026500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 60 teeth material steel SKU: 12026000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-60-teeth-material-steel-sku-12026000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 57 teeth material steel SKU: 12025700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-57-teeth-material-steel-sku-12025700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 38 teeth material steel SKU: 12023800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-38-teeth-material-steel-sku-12023800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 35 teeth material steel SKU: 12023500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-35-teeth-material-steel-sku-12023500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 32 teeth material steel SKU: 12023200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-32-teeth-material-steel-sku-12023200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 30 teeth material steel SKU: 12023000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-30-teeth-material-steel-sku-12023000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 28 teeth material steel SKU: 12022800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-28-teeth-material-steel-sku-12022800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 26 teeth material steel SKU: 12022600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-26-teeth-material-steel-sku-12022600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 25 teeth material steel SKU: 12022500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-25-teeth-material-steel-sku-12022500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 24 teeth material steel SKU: 12022400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-24-teeth-material-steel-sku-12022400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 23 teeth material steel SKU: 12022300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-23-teeth-material-steel-sku-12022300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 22 teeth material steel SKU: 12022200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-22-teeth-material-steel-sku-12022200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 21 teeth material steel SKU: 12022100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-21-teeth-material-steel-sku-12022100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 19 teeth material steel SKU: 12021900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-19-teeth-material-steel-sku-12021900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 18 teeth material steel SKU: 12021800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-18-teeth-material-steel-sku-12021800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 16 teeth material steel SKU: 12021600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-16-teeth-material-steel-sku-12021600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 15 teeth material steel SKU: 12021500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-15-teeth-material-steel-sku-12021500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 14 teeth material steel SKU: 12021400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-14-teeth-material-steel-sku-12021400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 13 teeth material steel SKU: 12021300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-13-teeth-material-steel-sku-12021300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 12 teeth material steel SKU: 12021200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-12-teeth-material-steel-sku-12021200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 11 teeth material steel SKU: 12021100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-11-teeth-material-steel-sku-12021100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 40 teeth material steel SKU: 12014000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-40-teeth-material-steel-sku-12014000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 39 teeth material steel SKU: 12013900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-39-teeth-material-steel-sku-12013900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 38 teeth material steel SKU: 12013800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-38-teeth-material-steel-sku-12013800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 37 teeth material steel SKU: 12013700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-37-teeth-material-steel-sku-12013700/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 36 teeth material steel SKU: 12013600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-36-teeth-material-steel-sku-12013600/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 35 teeth material steel SKU: 12013500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-35-teeth-material-steel-sku-12013500/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 34 teeth material steel SKU: 12013400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-34-teeth-material-steel-sku-12013400/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 33 teeth material steel SKU: 12013300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-33-teeth-material-steel-sku-12013300/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 32 teeth material steel SKU: 12013200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-32-teeth-material-steel-sku-12013200/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 31 teeth material steel SKU: 12013100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-31-teeth-material-steel-sku-12013100/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 30 teeth material steel SKU: 12013000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-30-teeth-material-steel-sku-12013000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 29 teeth material steel SKU: 12012900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-29-teeth-material-steel-sku-12012900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 9 teeth material steel teeth induction hardened SKU: 12188109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-9-teeth-material-steel-teeth-induction-hardened-sku-12188109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 8 teeth material steel teeth induction hardened SKU: 12188108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-8-teeth-material-steel-teeth-induction-hardened-sku-12188108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 06 B-2 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12183030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12183030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12183025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12183025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 30 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12183020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-30-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12183020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182516](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182516/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182316](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182316/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182315](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182315/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182116](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182116/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182115](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182115/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182016](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182016/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182015](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182015/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182012](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182012/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181920](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181920/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181916](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181916/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181915](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181915/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181912](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181912/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181820](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181820/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181815](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181815/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181812](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181812/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181720](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181720/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181715](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181715/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181712](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181712/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181620](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181620/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181615](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181615/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181612](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181612/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181516](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181516/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181515](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181515/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181514](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181514/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181419](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181419/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181416](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181416/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181415](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181415/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181414](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181414/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181315](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181315/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181314](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181314/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181312](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181312/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181310](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181310/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181216](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181216/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181215](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181215/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181214](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181214/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181212](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181212/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181210](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181210/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181115](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181115/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181114](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181114/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181112](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181112/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181110](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181110/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 06 B-1 25 teeth material steel for taper-bush 1108 SKU: 12177425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-for-taper-bush-1108-sku-12177425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 23 teeth material steel for taper-bush 1108 SKU: 12177423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-for-taper-bush-1108-sku-12177423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 21 teeth material steel for taper-bush 1108 SKU: 12177421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-for-taper-bush-1108-sku-12177421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 20 teeth material steel for taper-bush 1108 SKU: 12177420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-for-taper-bush-1108-sku-12177420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 19 teeth material steel for taper-bush 1008 SKU: 12177419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-for-taper-bush-1008-sku-12177419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 18 teeth material steel for taper-bush 1008 SKU: 12177418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-for-taper-bush-1008-sku-12177418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 114 teeth material cast iron for taper bush type 1615 SKU: 12177188G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-114-teeth-material-cast-iron-for-taper-bush-type-1615-sku-12177188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 95 teeth material cast iron for taper bush type 1610 SKU: 12177183G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-95-teeth-material-cast-iron-for-taper-bush-type-1610-sku-12177183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 76 teeth material cast iron for taper bush type 1610 SKU: 12177176G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-76-teeth-material-cast-iron-for-taper-bush-type-1610-sku-12177176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 57 teeth material cast iron for taper bush type 1610 SKU: 12177157G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-57-teeth-material-cast-iron-for-taper-bush-type-1610-sku-12177157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 45 teeth material steel for taper bush type 1610 SKU: 12177145](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-45-teeth-material-steel-for-taper-bush-type-1610-sku-12177145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 38 teeth material steel for taper bush type 1610 SKU: 12177138](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-38-teeth-material-steel-for-taper-bush-type-1610-sku-12177138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 30 teeth material steel for taper bush type 1210 SKU: 12177130](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-30-teeth-material-steel-for-taper-bush-type-1210-sku-12177130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 28 teeth material steel for taper bush type 1210 SKU: 12177128](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-28-teeth-material-steel-for-taper-bush-type-1210-sku-12177128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 27 teeth material steel for taper bush type 1210 SKU: 12177127](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-27-teeth-material-steel-for-taper-bush-type-1210-sku-12177127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 26 teeth material steel for taper bush type 1210 SKU: 12177126](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-26-teeth-material-steel-for-taper-bush-type-1210-sku-12177126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 25 teeth material steel for taper bush type 1210 SKU: 12177125](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-25-teeth-material-steel-for-taper-bush-type-1210-sku-12177125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 24 teeth material steel for taper bush type 1210 SKU: 12177124](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-24-teeth-material-steel-for-taper-bush-type-1210-sku-12177124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 23 teeth material steel for taper bush type 1210 SKU: 12177123](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-23-teeth-material-steel-for-taper-bush-type-1210-sku-12177123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 22 teeth material steel for taper bush type 1108 SKU: 12177122](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-22-teeth-material-steel-for-taper-bush-type-1108-sku-12177122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 21 teeth material steel for taper bush type 1008 SKU: 12177121](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-21-teeth-material-steel-for-taper-bush-type-1008-sku-12177121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 20 teeth material steel for taper bush type 1008 SKU: 12177120](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-20-teeth-material-steel-for-taper-bush-type-1008-sku-12177120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 19 teeth material steel for taper bush type 1008 SKU: 12177119](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-19-teeth-material-steel-for-taper-bush-type-1008-sku-12177119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 18 teeth material steel for taper bush type 1008 SKU: 12177118](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-18-teeth-material-steel-for-taper-bush-type-1008-sku-12177118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 17 teeth material steel for taper bush type 1008 SKU: 12177117](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-17-teeth-material-steel-for-taper-bush-type-1008-sku-12177117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 06 B-1 25 teeth material steel SKU: 12142500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-sku-12142500/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 23 teeth material steel SKU: 12142300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-sku-12142300/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 21 teeth material steel SKU: 12142100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-sku-12142100/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 20 teeth material steel SKU: 12142000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-sku-12142000/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 19 teeth material steel SKU: 12141900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-sku-12141900/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 18 teeth material steel SKU: 12141800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-sku-12141800/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 17 teeth material steel SKU: 12141700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-17-teeth-material-steel-sku-12141700/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 16 teeth material steel SKU: 12141600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-16-teeth-material-steel-sku-12141600/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 15 teeth material steel SKU: 12141500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-15-teeth-material-steel-sku-12141500/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 14 teeth material steel SKU: 12141400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-14-teeth-material-steel-sku-12141400/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 25 teeth material steel SKU: 12522500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-25-teeth-material-steel-sku-12522500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 24 teeth material steel SKU: 12522400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-24-teeth-material-steel-sku-12522400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 23 teeth material steel SKU: 12522300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-23-teeth-material-steel-sku-12522300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 22 teeth material steel SKU: 12522200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-22-teeth-material-steel-sku-12522200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 21 teeth material steel SKU: 12522100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-21-teeth-material-steel-sku-12522100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 20 teeth material steel SKU: 12522000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-20-teeth-material-steel-sku-12522000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 19 teeth material steel SKU: 12521900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-19-teeth-material-steel-sku-12521900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 18 teeth material steel SKU: 12521800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-18-teeth-material-steel-sku-12521800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 17 teeth material steel SKU: 12521700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-17-teeth-material-steel-sku-12521700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 16 teeth material steel SKU: 12521600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-16-teeth-material-steel-sku-12521600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 15 teeth material steel SKU: 12521500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-15-teeth-material-steel-sku-12521500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 14 teeth material steel SKU: 12521400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-14-teeth-material-steel-sku-12521400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 13 teeth material steel SKU: 12521300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-13-teeth-material-steel-sku-12521300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 12 teeth material steel SKU: 12521200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-12-teeth-material-steel-sku-12521200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 11 teeth material steel SKU: 12521100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-11-teeth-material-steel-sku-12521100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 114 teeth material cast iron SKU: 12518800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-114-teeth-material-cast-iron-sku-12518800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 95 teeth material cast iron SKU: 12518300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-95-teeth-material-cast-iron-sku-12518300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 76 teeth material cast iron SKU: 12517600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-76-teeth-material-cast-iron-sku-12517600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 57 teeth material cast iron SKU: 12515700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-57-teeth-material-cast-iron-sku-12515700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 45 teeth material cast iron SKU: 12514500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-45-teeth-material-cast-iron-sku-12514500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 40 teeth material steel SKU: 12514000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-40-teeth-material-steel-sku-12514000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 38 teeth material steel SKU: 12513800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-38-teeth-material-steel-sku-12513800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 37 teeth material steel SKU: 12513700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-37-teeth-material-steel-sku-12513700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 36 teeth material steel SKU: 12513600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-36-teeth-material-steel-sku-12513600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 35 teeth material steel SKU: 12513500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-35-teeth-material-steel-sku-12513500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 32 teeth material steel SKU: 12513200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-32-teeth-material-steel-sku-12513200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 30 teeth material steel SKU: 12513000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-30-teeth-material-steel-sku-12513000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 28 teeth material steel SKU: 12512800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-28-teeth-material-steel-sku-12512800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 27 teeth material steel SKU: 12512700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-27-teeth-material-steel-sku-12512700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 26 teeth material steel SKU: 12512600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-26-teeth-material-steel-sku-12512600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 25 teeth material steel SKU: 12512500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-25-teeth-material-steel-sku-12512500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 24 teeth material steel SKU: 12512400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-24-teeth-material-steel-sku-12512400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 23 teeth material steel SKU: 12512300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-23-teeth-material-steel-sku-12512300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 22 teeth material steel SKU: 12512200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-22-teeth-material-steel-sku-12512200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 21 teeth material steel SKU: 12512100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-21-teeth-material-steel-sku-12512100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 20 teeth material steel SKU: 12512000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-20-teeth-material-steel-sku-12512000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 19 teeth material steel SKU: 12511900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-19-teeth-material-steel-sku-12511900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 18 teeth material steel SKU: 12511800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-18-teeth-material-steel-sku-12511800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 17 teeth material steel SKU: 12511700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-17-teeth-material-steel-sku-12511700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 16 teeth material steel SKU: 12511600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-16-teeth-material-steel-sku-12511600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 15 teeth material steel SKU: 12511500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-15-teeth-material-steel-sku-12511500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 14 teeth material steel SKU: 12511400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-14-teeth-material-steel-sku-12511400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 13 teeth material steel SKU: 12511300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-13-teeth-material-steel-sku-12511300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 12 teeth material steel SKU: 12511200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-12-teeth-material-steel-sku-12511200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 11 teeth material steel SKU: 12511100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-11-teeth-material-steel-sku-12511100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 10 teeth material steel SKU: 12511000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-10-teeth-material-steel-sku-12511000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 9 teeth material steel SKU: 12510900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-9-teeth-material-steel-sku-12510900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 8 teeth material steel SKU: 12510800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-8-teeth-material-steel-sku-12510800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 25 teeth material steel teeth hardened SKU: 12188525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-teeth-hardened-sku-12188525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 23 teeth material steel teeth hardened SKU: 12188523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-teeth-hardened-sku-12188523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 21 teeth material steel teeth hardened SKU: 12188521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-teeth-hardened-sku-12188521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 20 teeth material steel teeth hardened SKU: 12188520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-teeth-hardened-sku-12188520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 19 teeth material steel teeth hardened SKU: 12188519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-teeth-hardened-sku-12188519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 18 teeth material steel teeth hardened SKU: 12188518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-teeth-hardened-sku-12188518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 17 teeth material steel teeth hardened SKU: 12188517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-17-teeth-material-steel-teeth-hardened-sku-12188517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 16 teeth material steel teeth hardened SKU: 12188516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-16-teeth-material-steel-teeth-hardened-sku-12188516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 15 teeth material steel teeth hardened SKU: 12188515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-15-teeth-material-steel-teeth-hardened-sku-12188515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 14 teeth material steel teeth hardened SKU: 12188514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-14-teeth-material-steel-teeth-hardened-sku-12188514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 13 teeth material steel teeth hardened SKU: 12188513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-13-teeth-material-steel-teeth-hardened-sku-12188513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 25 teeth material steel teeth hardened SKU: 12188425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-teeth-hardened-sku-12188425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 23 teeth material steel teeth hardened SKU: 12188423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-teeth-hardened-sku-12188423/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 21 teeth material steel teeth hardened SKU: 12188421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-teeth-hardened-sku-12188421/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 20 teeth material steel teeth hardened SKU: 12188420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-teeth-hardened-sku-12188420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 19 teeth material steel teeth hardened SKU: 12188419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-teeth-hardened-sku-12188419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 18 teeth material steel teeth hardened SKU: 12188418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-teeth-hardened-sku-12188418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 17 teeth material steel teeth hardened SKU: 12188417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-17-teeth-material-steel-teeth-hardened-sku-12188417/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 16 teeth material steel teeth hardened SKU: 12188416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-16-teeth-material-steel-teeth-hardened-sku-12188416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 15 teeth material steel teeth hardened SKU: 12188415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-15-teeth-material-steel-teeth-hardened-sku-12188415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 14 teeth material steel teeth hardened SKU: 12188414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-14-teeth-material-steel-teeth-hardened-sku-12188414/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 13 teeth material steel teeth hardened SKU: 12188413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-13-teeth-material-steel-teeth-hardened-sku-12188413/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 40 teeth material steel teeth induction hardened SKU: 12188140](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-40-teeth-material-steel-teeth-induction-hardened-sku-12188140/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 38 teeth material steel teeth induction hardened SKU: 12188138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-38-teeth-material-steel-teeth-induction-hardened-sku-12188138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 35 teeth material steel teeth induction hardened SKU: 12188135](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-35-teeth-material-steel-teeth-induction-hardened-sku-12188135/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 32 teeth material steel teeth induction hardened SKU: 12188132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-32-teeth-material-steel-teeth-induction-hardened-sku-12188132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 30 teeth material steel teeth induction hardened SKU: 12188130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-30-teeth-material-steel-teeth-induction-hardened-sku-12188130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 28 teeth material steel teeth induction hardened SKU: 12188128](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-28-teeth-material-steel-teeth-induction-hardened-sku-12188128/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 27 teeth material steel teeth induction hardened SKU: 12188127](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-27-teeth-material-steel-teeth-induction-hardened-sku-12188127/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 26 teeth material steel teeth induction hardened SKU: 12188126](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-26-teeth-material-steel-teeth-induction-hardened-sku-12188126/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 25 teeth material steel teeth induction hardened SKU: 12188125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-25-teeth-material-steel-teeth-induction-hardened-sku-12188125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 24 teeth material steel teeth induction hardened SKU: 12188124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-24-teeth-material-steel-teeth-induction-hardened-sku-12188124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 23 teeth material steel teeth induction hardened SKU: 12188123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-23-teeth-material-steel-teeth-induction-hardened-sku-12188123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 22 teeth material steel teeth induction hardened SKU: 12188122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-22-teeth-material-steel-teeth-induction-hardened-sku-12188122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 21 teeth material steel teeth induction hardened SKU: 12188121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-21-teeth-material-steel-teeth-induction-hardened-sku-12188121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 20 teeth material steel teeth induction hardened SKU: 12188120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-20-teeth-material-steel-teeth-induction-hardened-sku-12188120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 19 teeth material steel teeth induction hardened SKU: 12188119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-19-teeth-material-steel-teeth-induction-hardened-sku-12188119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 18 teeth material steel teeth induction hardened SKU: 12188118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-18-teeth-material-steel-teeth-induction-hardened-sku-12188118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 17 teeth material steel teeth induction hardened SKU: 12188117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-17-teeth-material-steel-teeth-induction-hardened-sku-12188117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 16 teeth material steel teeth induction hardened SKU: 12188116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-16-teeth-material-steel-teeth-induction-hardened-sku-12188116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 15 teeth material steel teeth induction hardened SKU: 12188115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-15-teeth-material-steel-teeth-induction-hardened-sku-12188115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 14 teeth material steel teeth induction hardened SKU: 12188114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-14-teeth-material-steel-teeth-induction-hardened-sku-12188114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 13 teeth material steel teeth induction hardened SKU: 12188113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-13-teeth-material-steel-teeth-induction-hardened-sku-12188113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 12 teeth material steel teeth induction hardened SKU: 12188112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-12-teeth-material-steel-teeth-induction-hardened-sku-12188112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 11 teeth material steel teeth induction hardened SKU: 12188111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-11-teeth-material-steel-teeth-induction-hardened-sku-12188111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 10 teeth material steel teeth induction hardened SKU: 12188110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-10-teeth-material-steel-teeth-induction-hardened-sku-12188110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581935](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581935/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581930](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581930/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581920](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581920/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581835](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581835/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581830](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581830/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581820](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581820/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581730](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581730/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581720](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581720/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581718](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581718/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581716](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581716/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581620](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581620/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581618](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581618/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581616](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581616/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581516](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581516/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581515](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581515/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581416](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581416/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581415](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581415/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581316](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581316/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581315](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581315/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581314](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581314/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581216](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581216/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581215](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581215/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581214](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581214/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581212](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581212/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581116](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581116/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581115](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581115/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581114](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581114/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581112](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581112/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 08 B-1 25 teeth material steel for taper-bush 2012 SKU: 12577425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-for-taper-bush-2012-sku-12577425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 23 teeth material steel for taper-bush 1610 SKU: 12577423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-for-taper-bush-1610-sku-12577423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 21 teeth material steel for taper-bush 1610 SKU: 12577421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-for-taper-bush-1610-sku-12577421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 20 teeth material steel for taper-bush 1210 SKU: 12577420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-for-taper-bush-1210-sku-12577420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 19 teeth material steel for taper-bush 1210 SKU: 12577419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-for-taper-bush-1210-sku-12577419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 18 teeth material steel for taper-bush 1210 SKU: 12577418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-for-taper-bush-1210-sku-12577418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 17 teeth material steel for taper-bush 1108 SKU: 12577417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-for-taper-bush-1108-sku-12577417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 16 teeth material steel for taper-bush 1108 SKU: 12577416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-for-taper-bush-1108-sku-12577416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 15 teeth material steel for taper-bush 1008 SKU: 12577415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-for-taper-bush-1008-sku-12577415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 114 teeth material cast iron for taper bush type 2517 SKU: 12577188G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-114-teeth-material-cast-iron-for-taper-bush-type-2517-sku-12577188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 114 teeth material steel for taper bush type 2517 SKU: 12577188](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-114-teeth-material-steel-for-taper-bush-type-2517-sku-12577188/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 95 teeth material cast iron for taper bush type 2012 SKU: 12577183G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-95-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 76 teeth material cast iron for taper bush type 2012 SKU: 12577176G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-76-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 57 teeth material cast iron for taper bush type 2012 SKU: 12577157G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-57-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 45 teeth material cast iron for taper bush type 2012 SKU: 12577145G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-45-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 45 teeth material steel for taper bush type 2012 SKU: 12577145](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-45-teeth-material-steel-for-taper-bush-type-2012-sku-12577145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 38 teeth material steel for taper bush type 2012 SKU: 12577138](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-38-teeth-material-steel-for-taper-bush-type-2012-sku-12577138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 30 teeth material steel for taper bush type 2012 SKU: 12577130](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-30-teeth-material-steel-for-taper-bush-type-2012-sku-12577130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 28 teeth material steel for taper bush type 2012 SKU: 12577128](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-28-teeth-material-steel-for-taper-bush-type-2012-sku-12577128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 27 teeth material steel for taper bush type 2012 SKU: 12577127](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-27-teeth-material-steel-for-taper-bush-type-2012-sku-12577127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 26 teeth material steel for taper bush type 2012 SKU: 12577126](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-26-teeth-material-steel-for-taper-bush-type-2012-sku-12577126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 25 teeth material steel for taper bush type 2012 SKU: 12577125](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-25-teeth-material-steel-for-taper-bush-type-2012-sku-12577125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 24 teeth material steel for taper bush type 2012 SKU: 12577124](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-24-teeth-material-steel-for-taper-bush-type-2012-sku-12577124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 23 teeth material steel for taper bush type 1610 SKU: 12577123](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-23-teeth-material-steel-for-taper-bush-type-1610-sku-12577123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 22 teeth material steel for taper bush type 1610 SKU: 12577122](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-22-teeth-material-steel-for-taper-bush-type-1610-sku-12577122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 21 teeth material steel for taper bush type 1610 SKU: 12577121](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-21-teeth-material-steel-for-taper-bush-type-1610-sku-12577121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 20 teeth material steel for taper bush type 1610 SKU: 12577120](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-20-teeth-material-steel-for-taper-bush-type-1610-sku-12577120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 19 teeth material steel for taper bush type 1210 SKU: 12577119](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-19-teeth-material-steel-for-taper-bush-type-1210-sku-12577119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 18 teeth material steel for taper bush type 1210 SKU: 12577118](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-18-teeth-material-steel-for-taper-bush-type-1210-sku-12577118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 17 teeth material steel for taper bush type 1210 SKU: 12577117](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-17-teeth-material-steel-for-taper-bush-type-1210-sku-12577117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 16 teeth material steel for taper bush type 1108 SKU: 12577116](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-16-teeth-material-steel-for-taper-bush-type-1108-sku-12577116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 15 teeth material steel for taper bush type 1008 SKU: 12577115](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-15-teeth-material-steel-for-taper-bush-type-1008-sku-12577115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 08 B-1 25 teeth material steel SKU: 12542500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-sku-12542500/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 23 teeth material steel SKU: 12542300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-sku-12542300/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 21 teeth material steel SKU: 12542100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-sku-12542100/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 20 teeth material steel SKU: 12542000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-sku-12542000/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 19 teeth material steel SKU: 12541900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-sku-12541900/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 18 teeth material steel SKU: 12541800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-sku-12541800/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 17 teeth material steel SKU: 12541700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-sku-12541700/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 16 teeth material steel SKU: 12541600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-sku-12541600/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 15 teeth material steel SKU: 12541500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-sku-12541500/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 14 teeth material steel SKU: 12541400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-14-teeth-material-steel-sku-12541400/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 13 teeth material steel SKU: 12541300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-13-teeth-material-steel-sku-12541300/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 12 teeth material steel SKU: 12541200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-12-teeth-material-steel-sku-12541200/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 114 teeth material steel SKU: 12528800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-114-teeth-material-steel-sku-12528800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 95 teeth material steel SKU: 12528300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-95-teeth-material-steel-sku-12528300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 76 teeth material steel SKU: 12527600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-76-teeth-material-steel-sku-12527600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 57 teeth material steel SKU: 12525700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-57-teeth-material-steel-sku-12525700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 54 teeth material steel SKU: 12525400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-54-teeth-material-steel-sku-12525400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 48 teeth material steel SKU: 12524800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-48-teeth-material-steel-sku-12524800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 45 teeth material steel SKU: 12524500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-45-teeth-material-steel-sku-12524500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 40 teeth material steel SKU: 12524000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-40-teeth-material-steel-sku-12524000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 38 teeth material steel SKU: 12523800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-38-teeth-material-steel-sku-12523800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 36 teeth material steel SKU: 12523600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-36-teeth-material-steel-sku-12523600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 35 teeth material steel SKU: 12523500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-35-teeth-material-steel-sku-12523500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 32 teeth material steel SKU: 12523200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-32-teeth-material-steel-sku-12523200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 30 teeth material steel SKU: 12523000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-30-teeth-material-steel-sku-12523000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 28 teeth material steel SKU: 12522800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-28-teeth-material-steel-sku-12522800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 27 teeth material steel SKU: 12522700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-27-teeth-material-steel-sku-12522700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 26 teeth material steel SKU: 12522600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-26-teeth-material-steel-sku-12522600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 38 teeth material steel SKU: 12613800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-38-teeth-material-steel-sku-12613800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 36 teeth material steel SKU: 12613600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-36-teeth-material-steel-sku-12613600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 32 teeth material steel SKU: 12613200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-32-teeth-material-steel-sku-12613200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 30 teeth material steel SKU: 12613000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-30-teeth-material-steel-sku-12613000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 27 teeth material steel SKU: 12612700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-27-teeth-material-steel-sku-12612700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 25 teeth material steel SKU: 12612500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-25-teeth-material-steel-sku-12612500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 24 teeth material steel SKU: 12612400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-24-teeth-material-steel-sku-12612400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 23 teeth material steel SKU: 12612300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-23-teeth-material-steel-sku-12612300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 22 teeth material steel SKU: 12612200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-22-teeth-material-steel-sku-12612200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 21 teeth material steel SKU: 12612100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-21-teeth-material-steel-sku-12612100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 20 teeth material steel SKU: 12612000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-20-teeth-material-steel-sku-12612000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 19 teeth material steel SKU: 12611900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-19-teeth-material-steel-sku-12611900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 18 teeth material steel SKU: 12611800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-18-teeth-material-steel-sku-12611800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 17 teeth material steel SKU: 12611700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-17-teeth-material-steel-sku-12611700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 16 teeth material steel SKU: 12611600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-16-teeth-material-steel-sku-12611600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 15 teeth material steel SKU: 12611500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-15-teeth-material-steel-sku-12611500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 14 teeth material steel SKU: 12611400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-14-teeth-material-steel-sku-12611400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 13 teeth material steel SKU: 12611300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-13-teeth-material-steel-sku-12611300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 12 teeth material steel SKU: 12611200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-12-teeth-material-steel-sku-12611200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 11 teeth material steel SKU: 12611100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-11-teeth-material-steel-sku-12611100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 10 teeth material steel SKU: 12611000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-10-teeth-material-steel-sku-12611000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 9 teeth material steel SKU: 12610900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-9-teeth-material-steel-sku-12610900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 8 teeth material steel SKU: 12610800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-8-teeth-material-steel-sku-12610800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 25 teeth material steel teeth hardened SKU: 12588525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-teeth-hardened-sku-12588525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 23 teeth material steel teeth hardened SKU: 12588523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-teeth-hardened-sku-12588523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 21 teeth material steel teeth hardened SKU: 12588521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-teeth-hardened-sku-12588521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 20 teeth material steel teeth hardened SKU: 12588520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-teeth-hardened-sku-12588520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 19 teeth material steel teeth hardened SKU: 12588519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-teeth-hardened-sku-12588519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 18 teeth material steel teeth hardened SKU: 12588518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-teeth-hardened-sku-12588518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 17 teeth material steel teeth hardened SKU: 12588517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-teeth-hardened-sku-12588517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 16 teeth material steel teeth hardened SKU: 12588516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-teeth-hardened-sku-12588516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 15 teeth material steel teeth hardened SKU: 12588515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-teeth-hardened-sku-12588515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 14 teeth material steel teeth hardened SKU: 12588514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-14-teeth-material-steel-teeth-hardened-sku-12588514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 13 teeth material steel teeth hardened SKU: 12588513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-13-teeth-material-steel-teeth-hardened-sku-12588513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 12 teeth material steel teeth hardened SKU: 12588512](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-12-teeth-material-steel-teeth-hardened-sku-12588512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 25 teeth material steel teeth hardened SKU: 12588425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-teeth-hardened-sku-12588425/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 23 teeth material steel teeth hardened SKU: 12588423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-teeth-hardened-sku-12588423/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 21 teeth material steel teeth hardened SKU: 12588421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-teeth-hardened-sku-12588421/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 20 teeth material steel teeth hardened SKU: 12588420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-teeth-hardened-sku-12588420/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 19 teeth material steel teeth hardened SKU: 12588419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-teeth-hardened-sku-12588419/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 18 teeth material steel teeth hardened SKU: 12588418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-teeth-hardened-sku-12588418/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 17 teeth material steel teeth hardened SKU: 12588417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-teeth-hardened-sku-12588417/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 16 teeth material steel teeth hardened SKU: 12588416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-teeth-hardened-sku-12588416/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 15 teeth material steel teeth hardened SKU: 12588415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-teeth-hardened-sku-12588415/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 14 teeth material steel teeth hardened SKU: 12588414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-14-teeth-material-steel-teeth-hardened-sku-12588414/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 13 teeth material steel teeth hardened SKU: 12588413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-13-teeth-material-steel-teeth-hardened-sku-12588413/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 12 teeth material steel teeth hardened SKU: 12588412](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-12-teeth-material-steel-teeth-hardened-sku-12588412/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 40 teeth material steel teeth induction hardened SKU: 12588140](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-40-teeth-material-steel-teeth-induction-hardened-sku-12588140/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 38 teeth material steel teeth induction hardened SKU: 12588138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-38-teeth-material-steel-teeth-induction-hardened-sku-12588138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 36 teeth material steel teeth induction hardened SKU: 12588136](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-36-teeth-material-steel-teeth-induction-hardened-sku-12588136/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 35 teeth material steel teeth induction hardened SKU: 12588135](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-35-teeth-material-steel-teeth-induction-hardened-sku-12588135/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 32 teeth material steel teeth induction hardened SKU: 12588132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-32-teeth-material-steel-teeth-induction-hardened-sku-12588132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 30 teeth material steel teeth induction hardened SKU: 12588130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-30-teeth-material-steel-teeth-induction-hardened-sku-12588130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 28 teeth material steel teeth induction hardened SKU: 12588128](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-28-teeth-material-steel-teeth-induction-hardened-sku-12588128/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 27 teeth material steel teeth induction hardened SKU: 12588127](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-27-teeth-material-steel-teeth-induction-hardened-sku-12588127/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 26 teeth material steel teeth induction hardened SKU: 12588126](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-26-teeth-material-steel-teeth-induction-hardened-sku-12588126/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 25 teeth material steel teeth induction hardened SKU: 12588125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-25-teeth-material-steel-teeth-induction-hardened-sku-12588125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 24 teeth material steel teeth induction hardened SKU: 12588124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-24-teeth-material-steel-teeth-induction-hardened-sku-12588124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 23 teeth material steel teeth induction hardened SKU: 12588123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-23-teeth-material-steel-teeth-induction-hardened-sku-12588123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 22 teeth material steel teeth induction hardened SKU: 12588122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-22-teeth-material-steel-teeth-induction-hardened-sku-12588122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 21 teeth material steel teeth induction hardened SKU: 12588121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-21-teeth-material-steel-teeth-induction-hardened-sku-12588121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 20 teeth material steel teeth induction hardened SKU: 12588120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-20-teeth-material-steel-teeth-induction-hardened-sku-12588120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 19 teeth material steel teeth induction hardened SKU: 12588119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-19-teeth-material-steel-teeth-induction-hardened-sku-12588119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 18 teeth material steel teeth induction hardened SKU: 12588118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-18-teeth-material-steel-teeth-induction-hardened-sku-12588118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 17 teeth material steel teeth induction hardened SKU: 12588117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-17-teeth-material-steel-teeth-induction-hardened-sku-12588117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 16 teeth material steel teeth induction hardened SKU: 12588116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-16-teeth-material-steel-teeth-induction-hardened-sku-12588116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 15 teeth material steel teeth induction hardened SKU: 12588115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-15-teeth-material-steel-teeth-induction-hardened-sku-12588115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 14 teeth material steel teeth induction hardened SKU: 12588114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-14-teeth-material-steel-teeth-induction-hardened-sku-12588114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 13 teeth material steel teeth induction hardened SKU: 12588113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-13-teeth-material-steel-teeth-induction-hardened-sku-12588113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 12 teeth material steel teeth induction hardened SKU: 12588112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-12-teeth-material-steel-teeth-induction-hardened-sku-12588112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 11 teeth material steel teeth induction hardened SKU: 12588111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-11-teeth-material-steel-teeth-induction-hardened-sku-12588111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 10 teeth material steel teeth induction hardened SKU: 12588110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-10-teeth-material-steel-teeth-induction-hardened-sku-12588110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 9 teeth material steel teeth induction hardened SKU: 12588109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-9-teeth-material-steel-teeth-induction-hardened-sku-12588109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 8 teeth material steel teeth induction hardened SKU: 12588108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-8-teeth-material-steel-teeth-induction-hardened-sku-12588108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 08 B-2 30 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12583035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-30-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12583035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12583030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12583030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12583025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12583025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582135](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582135/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681830](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681830/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681820](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681820/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681735](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681735/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681730](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681730/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681720](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681720/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681635](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681635/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681630](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681630/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681620](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681620/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681535](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681535/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681430](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681430/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681230](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681230/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 10 B-1 25 teeth material steel for taper-bush 2012 SKU: 12677425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-for-taper-bush-2012-sku-12677425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 23 teeth material steel for taper-bush 2012 SKU: 12677423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-for-taper-bush-2012-sku-12677423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 21 teeth material steel for taper-bush 2012 SKU: 12677421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-for-taper-bush-2012-sku-12677421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 20 teeth material steel for taper-bush 1610 SKU: 12677420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-for-taper-bush-1610-sku-12677420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 19 teeth material steel for taper-bush 1610 SKU: 12677419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-for-taper-bush-1610-sku-12677419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 18 teeth material steel for taper-bush 1610 SKU: 12677418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-for-taper-bush-1610-sku-12677418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 17 teeth material steel for taper-bush 1610 SKU: 12677417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-for-taper-bush-1610-sku-12677417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 16 teeth material steel for taper-bush 1210 SKU: 12677416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-for-taper-bush-1210-sku-12677416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 15 teeth material steel for taper-bush 1210 SKU: 12677415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-for-taper-bush-1210-sku-12677415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 14 teeth material steel for taper-bush 1108 SKU: 12677414](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-for-taper-bush-1108-sku-12677414/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 13 teeth material steel for taper-bush 1108 SKU: 12677413](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-for-taper-bush-1108-sku-12677413/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 12 teeth material steel for taper-bush 1108 SKU: 12677412](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-for-taper-bush-1108-sku-12677412/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 95 teeth material cast iron for taper bush type 3020 SKU: 12677183G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-95-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12677183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 76 teeth material cast iron for taper bush type 3020 SKU: 12677176G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12677176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 57 teeth material cast iron for taper bush type 2517 SKU: 12677157G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-57-teeth-material-cast-iron-for-taper-bush-type-2517-sku-12677157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 45 teeth material cast iron for taper bush type 2517 SKU: 12677145G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-45-teeth-material-cast-iron-for-taper-bush-type-2517-sku-12677145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 38 teeth material steel for taper bush type 2517 SKU: 12677138](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-38-teeth-material-steel-for-taper-bush-type-2517-sku-12677138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 30 teeth material steel for taper bush type 2012 SKU: 12677130](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-30-teeth-material-steel-for-taper-bush-type-2012-sku-12677130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 28 teeth material steel for taper bush type 2012 SKU: 12677128](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-28-teeth-material-steel-for-taper-bush-type-2012-sku-12677128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 27 teeth material steel for taper bush type 2012 SKU: 12677127](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-27-teeth-material-steel-for-taper-bush-type-2012-sku-12677127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 25 teeth material steel for taper bush type 2012 SKU: 12677125](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-25-teeth-material-steel-for-taper-bush-type-2012-sku-12677125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 24 teeth material steel for taper bush type 2012 SKU: 12677124](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-24-teeth-material-steel-for-taper-bush-type-2012-sku-12677124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 23 teeth material steel for taper bush type 1610 SKU: 12677123](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-23-teeth-material-steel-for-taper-bush-type-1610-sku-12677123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 22 teeth material steel for taper bush type 1610 SKU: 12677122](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-22-teeth-material-steel-for-taper-bush-type-1610-sku-12677122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 21 teeth material steel for taper bush type 1610 SKU: 12677121](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-21-teeth-material-steel-for-taper-bush-type-1610-sku-12677121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 20 teeth material steel for taper bush type 1610 SKU: 12677120](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-20-teeth-material-steel-for-taper-bush-type-1610-sku-12677120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 19 teeth material steel for taper bush type 1610 SKU: 12677119](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-19-teeth-material-steel-for-taper-bush-type-1610-sku-12677119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 18 teeth material steel for taper bush type 1610 SKU: 12677118](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-18-teeth-material-steel-for-taper-bush-type-1610-sku-12677118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 17 teeth material steel for taper bush type 1610 SKU: 12677117](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-17-teeth-material-steel-for-taper-bush-type-1610-sku-12677117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 16 teeth material steel for taper bush type 1610 SKU: 12677116](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-16-teeth-material-steel-for-taper-bush-type-1610-sku-12677116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 15 teeth material steel for taper bush type 1210 SKU: 12677115](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-15-teeth-material-steel-for-taper-bush-type-1210-sku-12677115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 10 B-1 25 teeth material steel SKU: 12642500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-sku-12642500/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 23 teeth material steel SKU: 12642300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-sku-12642300/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 21 teeth material steel SKU: 12642100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-sku-12642100/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 20 teeth material steel SKU: 12642000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-sku-12642000/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 19 teeth material steel SKU: 12641900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-sku-12641900/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 18 teeth material steel SKU: 12641800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-sku-12641800/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 17 teeth material steel SKU: 12641700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-sku-12641700/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 16 teeth material steel SKU: 12641600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-sku-12641600/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 15 teeth material steel SKU: 12641500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-sku-12641500/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 14 teeth material steel SKU: 12641400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-sku-12641400/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 13 teeth material steel SKU: 12641300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-sku-12641300/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 12 teeth material steel SKU: 12641200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-sku-12641200/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 114 teeth material steel SKU: 12628800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-114-teeth-material-steel-sku-12628800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 95 teeth material steel SKU: 12628300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-95-teeth-material-steel-sku-12628300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 76 teeth material steel SKU: 12627600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-76-teeth-material-steel-sku-12627600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 57 teeth material steel SKU: 12625700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-57-teeth-material-steel-sku-12625700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 48 teeth material steel SKU: 12624800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-48-teeth-material-steel-sku-12624800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 45 teeth material steel SKU: 12624500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-45-teeth-material-steel-sku-12624500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 38 teeth material steel SKU: 12623800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-38-teeth-material-steel-sku-12623800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 35 teeth material steel SKU: 12623500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-35-teeth-material-steel-sku-12623500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 30 teeth material steel SKU: 12623000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-30-teeth-material-steel-sku-12623000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 28 teeth material steel SKU: 12622800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-28-teeth-material-steel-sku-12622800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 27 teeth material steel SKU: 12622700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-27-teeth-material-steel-sku-12622700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 26 teeth material steel SKU: 12622600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-26-teeth-material-steel-sku-12622600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 24 teeth material steel SKU: 12622400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-24-teeth-material-steel-sku-12622400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 22 teeth material steel SKU: 12622200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-22-teeth-material-steel-sku-12622200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 21 teeth material steel SKU: 12622100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-21-teeth-material-steel-sku-12622100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 20 teeth material steel SKU: 12622000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-20-teeth-material-steel-sku-12622000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 19 teeth material steel SKU: 12621900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-19-teeth-material-steel-sku-12621900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 18 teeth material steel SKU: 12621800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-18-teeth-material-steel-sku-12621800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 17 teeth material steel SKU: 12621700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-17-teeth-material-steel-sku-12621700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 16 teeth material steel SKU: 12621600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-16-teeth-material-steel-sku-12621600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 15 teeth material steel SKU: 12621500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-15-teeth-material-steel-sku-12621500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 14 teeth material steel SKU: 12621400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-14-teeth-material-steel-sku-12621400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 13 teeth material steel SKU: 12621300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-13-teeth-material-steel-sku-12621300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 12 teeth material steel SKU: 12621200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-12-teeth-material-steel-sku-12621200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 11 teeth material steel SKU: 12621100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-11-teeth-material-steel-sku-12621100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 114 teeth material cast iron SKU: 12618800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-114-teeth-material-cast-iron-sku-12618800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 95 teeth material cast iron SKU: 12618300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-95-teeth-material-cast-iron-sku-12618300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 76 teeth material cast iron SKU: 12617600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-76-teeth-material-cast-iron-sku-12617600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 57 teeth material cast iron SKU: 12615700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-57-teeth-material-cast-iron-sku-12615700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 45 teeth material cast iron SKU: 12614500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-45-teeth-material-cast-iron-sku-12614500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 22 teeth material steel SKU: 12712200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-22-teeth-material-steel-sku-12712200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 21 teeth material steel SKU: 12712100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-21-teeth-material-steel-sku-12712100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 20 teeth material steel SKU: 12712000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-20-teeth-material-steel-sku-12712000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 19 teeth material steel SKU: 12711900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-19-teeth-material-steel-sku-12711900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 18 teeth material steel SKU: 12711800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-18-teeth-material-steel-sku-12711800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 17 teeth material steel SKU: 12711700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-17-teeth-material-steel-sku-12711700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 16 teeth material steel SKU: 12711600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-16-teeth-material-steel-sku-12711600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 15 teeth material steel SKU: 12711500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-15-teeth-material-steel-sku-12711500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 14 teeth material steel SKU: 12711400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-14-teeth-material-steel-sku-12711400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 13 teeth material steel SKU: 12711300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-13-teeth-material-steel-sku-12711300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 12 teeth material steel SKU: 12711200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-12-teeth-material-steel-sku-12711200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 11 teeth material steel SKU: 12711100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-11-teeth-material-steel-sku-12711100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 10 teeth material steel SKU: 12711000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-10-teeth-material-steel-sku-12711000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 9 teeth material steel SKU: 12710900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-9-teeth-material-steel-sku-12710900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 8 teeth material steel SKU: 12710800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-8-teeth-material-steel-sku-12710800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 25 teeth material steel teeth hardened SKU: 12688525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-teeth-hardened-sku-12688525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 23 teeth material steel teeth hardened SKU: 12688523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-teeth-hardened-sku-12688523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 21 teeth material steel teeth hardened SKU: 12688521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-teeth-hardened-sku-12688521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 20 teeth material steel teeth hardened SKU: 12688520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-teeth-hardened-sku-12688520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 19 teeth material steel teeth hardened SKU: 12688519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-teeth-hardened-sku-12688519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 18 teeth material steel teeth hardened SKU: 12688518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-teeth-hardened-sku-12688518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 17 teeth material steel teeth hardened SKU: 12688517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-teeth-hardened-sku-12688517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 16 teeth material steel teeth hardened SKU: 12688516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-teeth-hardened-sku-12688516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 15 teeth material steel teeth hardened SKU: 12688515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-teeth-hardened-sku-12688515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 14 teeth material steel teeth hardened SKU: 12688514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-teeth-hardened-sku-12688514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 13 teeth material steel teeth hardened SKU: 12688513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-teeth-hardened-sku-12688513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 12 teeth material steel teeth hardened SKU: 12688512](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-teeth-hardened-sku-12688512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 25 teeth material steel teeth hardened SKU: 12688425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-teeth-hardened-sku-12688425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 23 teeth material steel teeth hardened SKU: 12688423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-teeth-hardened-sku-12688423/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 21 teeth material steel teeth hardened SKU: 12688421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-teeth-hardened-sku-12688421/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 20 teeth material steel teeth hardened SKU: 12688420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-teeth-hardened-sku-12688420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 19 teeth material steel teeth hardened SKU: 12688419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-teeth-hardened-sku-12688419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 18 teeth material steel teeth hardened SKU: 12688418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-teeth-hardened-sku-12688418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 17 teeth material steel teeth hardened SKU: 12688417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-teeth-hardened-sku-12688417/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 16 teeth material steel teeth hardened SKU: 12688416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-teeth-hardened-sku-12688416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 15 teeth material steel teeth hardened SKU: 12688415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-teeth-hardened-sku-12688415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 14 teeth material steel teeth hardened SKU: 12688414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-teeth-hardened-sku-12688414/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 13 teeth material steel teeth hardened SKU: 12688413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-teeth-hardened-sku-12688413/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 12 teeth material steel teeth hardened SKU: 12688412](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-teeth-hardened-sku-12688412/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 38 teeth material steel teeth induction hardened SKU: 12688138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-38-teeth-material-steel-teeth-induction-hardened-sku-12688138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 36 teeth material steel teeth induction hardened SKU: 12688136](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-36-teeth-material-steel-teeth-induction-hardened-sku-12688136/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 32 teeth material steel teeth induction hardened SKU: 12688132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-32-teeth-material-steel-teeth-induction-hardened-sku-12688132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 30 teeth material steel teeth induction hardened SKU: 12688130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-30-teeth-material-steel-teeth-induction-hardened-sku-12688130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 27 teeth material steel teeth induction hardened SKU: 12688127](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-27-teeth-material-steel-teeth-induction-hardened-sku-12688127/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 25 teeth material steel teeth induction hardened SKU: 12688125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-25-teeth-material-steel-teeth-induction-hardened-sku-12688125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 24 teeth material steel teeth induction hardened SKU: 12688124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-24-teeth-material-steel-teeth-induction-hardened-sku-12688124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 23 teeth material steel teeth induction hardened SKU: 12688123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-23-teeth-material-steel-teeth-induction-hardened-sku-12688123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 22 teeth material steel teeth induction hardened SKU: 12688122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-22-teeth-material-steel-teeth-induction-hardened-sku-12688122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 21 teeth material steel teeth induction hardened SKU: 12688121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-21-teeth-material-steel-teeth-induction-hardened-sku-12688121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 20 teeth material steel teeth induction hardened SKU: 12688120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-20-teeth-material-steel-teeth-induction-hardened-sku-12688120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 19 teeth material steel teeth induction hardened SKU: 12688119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-19-teeth-material-steel-teeth-induction-hardened-sku-12688119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 18 teeth material steel teeth induction hardened SKU: 12688118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-18-teeth-material-steel-teeth-induction-hardened-sku-12688118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 17 teeth material steel teeth induction hardened SKU: 12688117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-17-teeth-material-steel-teeth-induction-hardened-sku-12688117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 16 teeth material steel teeth induction hardened SKU: 12688116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-16-teeth-material-steel-teeth-induction-hardened-sku-12688116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 15 teeth material steel teeth induction hardened SKU: 12688115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-15-teeth-material-steel-teeth-induction-hardened-sku-12688115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 14 teeth material steel teeth induction hardened SKU: 12688114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-14-teeth-material-steel-teeth-induction-hardened-sku-12688114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 13 teeth material steel teeth induction hardened SKU: 12688113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-13-teeth-material-steel-teeth-induction-hardened-sku-12688113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 12 teeth material steel teeth induction hardened SKU: 12688112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-12-teeth-material-steel-teeth-induction-hardened-sku-12688112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 11 teeth material steel teeth induction hardened SKU: 12688111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-11-teeth-material-steel-teeth-induction-hardened-sku-12688111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 10 teeth material steel teeth induction hardened SKU: 12688110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-10-teeth-material-steel-teeth-induction-hardened-sku-12688110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 9 teeth material steel teeth induction hardened SKU: 12688109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-9-teeth-material-steel-teeth-induction-hardened-sku-12688109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 8 teeth material steel teeth induction hardened SKU: 12688108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-8-teeth-material-steel-teeth-induction-hardened-sku-12688108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 10 B-2 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682540](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682540/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682535](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682535/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682430](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682430/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682340](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682340/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682335](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682335/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682230](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682230/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682140](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682140/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682135](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682135/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682040](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682040/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681940](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681940/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681935](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681935/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681930](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681930/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681920](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681920/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681840](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681840/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681835](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681835/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781640](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781640/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781635](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781635/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781630](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781630/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781535](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781535/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781435](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781435/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781430](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781430/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781335](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781335/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781235](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781235/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781230](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781230/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 12 B-1 25 teeth material steel for taper-bush 2517 SKU: 12777425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-25-teeth-material-steel-for-taper-bush-2517-sku-12777425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 23 teeth material steel for taper-bush 2517 SKU: 12777423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-23-teeth-material-steel-for-taper-bush-2517-sku-12777423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 21 teeth material steel for taper-bush 2517 SKU: 12777421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-21-teeth-material-steel-for-taper-bush-2517-sku-12777421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 20 teeth material steel for taper-bush 2517 SKU: 12777420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-20-teeth-material-steel-for-taper-bush-2517-sku-12777420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 19 teeth material steel for taper-bush 2012 SKU: 12777419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-19-teeth-material-steel-for-taper-bush-2012-sku-12777419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 18 teeth material steel for taper-bush 2012 SKU: 12777418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-18-teeth-material-steel-for-taper-bush-2012-sku-12777418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 17 teeth material steel for taper-bush 1610 SKU: 12777417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-17-teeth-material-steel-for-taper-bush-1610-sku-12777417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 16 teeth material steel for taper-bush 1610 SKU: 12777416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-16-teeth-material-steel-for-taper-bush-1610-sku-12777416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 15 teeth material steel for taper-bush 1610 SKU: 12777415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-15-teeth-material-steel-for-taper-bush-1610-sku-12777415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 14 teeth material steel for taper-bush 1210 SKU: 12777414](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-14-teeth-material-steel-for-taper-bush-1210-sku-12777414/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 13 teeth material steel for taper-bush 1210 SKU: 12777413](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-13-teeth-material-steel-for-taper-bush-1210-sku-12777413/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 114 teeth material cast iron for taper bush type 3030 SKU: 12777188G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-114-teeth-material-cast-iron-for-taper-bush-type-3030-sku-12777188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 95 teeth material cast iron for taper bush type 3020 SKU: 12777183G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12777183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 76 teeth material cast iron for taper bush type 3020 SKU: 12777176G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12777176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 57 teeth material cast iron for taper bush type 3020 SKU: 12777157G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-57-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12777157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 57 teeth material steel for taper bush type 3020 SKU: 12777157](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-57-teeth-material-steel-for-taper-bush-type-3020-sku-12777157/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 45 teeth material cast iron for taper bush type 3020 SKU: 12777145G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-45-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12777145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 45 teeth material steel for taper bush type 3020 SKU: 12777145](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-45-teeth-material-steel-for-taper-bush-type-3020-sku-12777145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 38 teeth material steel for taper bush type 3020 SKU: 12777138](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-38-teeth-material-steel-for-taper-bush-type-3020-sku-12777138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 30 teeth material steel for taper bush type 2517 SKU: 12777130](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-30-teeth-material-steel-for-taper-bush-type-2517-sku-12777130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 28 teeth material steel for taper bush type 2517 SKU: 12777128](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-28-teeth-material-steel-for-taper-bush-type-2517-sku-12777128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 27 teeth material steel for taper bush type 2517 SKU: 12777127](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-27-teeth-material-steel-for-taper-bush-type-2517-sku-12777127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 26 teeth material steel for taper bush type 2517 SKU: 12777126](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-26-teeth-material-steel-for-taper-bush-type-2517-sku-12777126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 25 teeth material steel for taper bush type 2517 SKU: 12777125](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-25-teeth-material-steel-for-taper-bush-type-2517-sku-12777125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 24 teeth material steel for taper bush type 2517 SKU: 12777124](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-24-teeth-material-steel-for-taper-bush-type-2517-sku-12777124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 23 teeth material steel for taper bush type 2517 SKU: 12777123](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-23-teeth-material-steel-for-taper-bush-type-2517-sku-12777123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 22 teeth material steel for taper bush type 2517 SKU: 12777122](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-22-teeth-material-steel-for-taper-bush-type-2517-sku-12777122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 21 teeth material steel for taper bush type 2517 SKU: 12777121](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-21-teeth-material-steel-for-taper-bush-type-2517-sku-12777121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 20 teeth material steel for taper bush type 2517 SKU: 12777120](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-20-teeth-material-steel-for-taper-bush-type-2517-sku-12777120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 19 teeth material steel for taper bush type 2012 SKU: 12777119](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-19-teeth-material-steel-for-taper-bush-type-2012-sku-12777119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 18 teeth material steel for taper bush type 2012 SKU: 12777118](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-18-teeth-material-steel-for-taper-bush-type-2012-sku-12777118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 17 teeth material steel for taper bush type 1610 SKU: 12777117](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-17-teeth-material-steel-for-taper-bush-type-1610-sku-12777117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 16 teeth material steel for taper bush type 1610 SKU: 12777116](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-16-teeth-material-steel-for-taper-bush-type-1610-sku-12777116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 15 teeth material steel for taper bush type 1610 SKU: 12777115](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-15-teeth-material-steel-for-taper-bush-type-1610-sku-12777115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 14 teeth material steel for taper bush type 1610 SKU: 12777114](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-14-teeth-material-steel-for-taper-bush-type-1610-sku-12777114/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 12 B-1 25 teeth material steel SKU: 12742500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-25-teeth-material-steel-sku-12742500/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 23 teeth material steel SKU: 12742300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-23-teeth-material-steel-sku-12742300/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 21 teeth material steel SKU: 12742100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-21-teeth-material-steel-sku-12742100/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 20 teeth material steel SKU: 12742000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-20-teeth-material-steel-sku-12742000/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 19 teeth material steel SKU: 12741900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-19-teeth-material-steel-sku-12741900/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 18 teeth material steel SKU: 12741800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-18-teeth-material-steel-sku-12741800/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 17 teeth material steell SKU: 12741700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-17-teeth-material-steell-sku-12741700/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 16 teeth material steel SKU: 12741600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-16-teeth-material-steel-sku-12741600/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 15 teeth material steel SKU: 12741500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-15-teeth-material-steel-sku-12741500/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 14 teeth material steel SKU: 12741400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-14-teeth-material-steel-sku-12741400/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 13 teeth material steel SKU: 12741300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-13-teeth-material-steel-sku-12741300/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 12 teeth material steel SKU: 12741200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-12-teeth-material-steel-sku-12741200/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 114 teeth material steel SKU: 12728800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-114-teeth-material-steel-sku-12728800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 95 teeth material steel SKU: 12728300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-95-teeth-material-steel-sku-12728300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 76 teeth material steel SKU: 12727600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-76-teeth-material-steel-sku-12727600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 57 teeth material steel SKU: 12725700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-57-teeth-material-steel-sku-12725700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 48 teeth material steel SKU: 12724800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-48-teeth-material-steel-sku-12724800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 45 teeth material steel SKU: 12724500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-45-teeth-material-steel-sku-12724500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 38 teeth material steel SKU: 12723800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-38-teeth-material-steel-sku-12723800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 35 teeth material steel SKU: 12723500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-35-teeth-material-steel-sku-12723500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 30 teeth material steel SKU: 12723000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-30-teeth-material-steel-sku-12723000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 27 teeth material steel SKU: 12722700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-27-teeth-material-steel-sku-12722700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 24 teeth material steel SKU: 12722400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-24-teeth-material-steel-sku-12722400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 22 teeth material steel SKU: 12722200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-22-teeth-material-steel-sku-12722200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 20 teeth material steel SKU: 12722000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-20-teeth-material-steel-sku-12722000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 18 teeth material steel SKU: 12721800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-18-teeth-material-steel-sku-12721800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 16 teeth material steel SKU: 12721600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-16-teeth-material-steel-sku-12721600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 15 teeth material steel SKU: 12721500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-15-teeth-material-steel-sku-12721500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 14 teeth material steel SKU: 12721400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-14-teeth-material-steel-sku-12721400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 13 teeth material steel SKU: 12721300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-13-teeth-material-steel-sku-12721300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 12 teeth material steel SKU: 12721200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-12-teeth-material-steel-sku-12721200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 11 teeth material steel SKU: 12721100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-11-teeth-material-steel-sku-12721100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 95 teeth material cast iron SKU: 12718300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-95-teeth-material-cast-iron-sku-12718300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 76 teeth material cast iron SKU: 12717600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-76-teeth-material-cast-iron-sku-12717600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 57 teeth material cast iron SKU: 12715700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-57-teeth-material-cast-iron-sku-12715700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 45 teeth material cast iron SKU: 12714500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-45-teeth-material-cast-iron-sku-12714500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 38 teeth material steel SKU: 12713800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-38-teeth-material-steel-sku-12713800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 32 teeth material steel SKU: 12713200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-32-teeth-material-steel-sku-12713200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 30 teeth material steel SKU: 12713000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-30-teeth-material-steel-sku-12713000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 25 teeth material steel SKU: 12712500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-25-teeth-material-steel-sku-12712500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 24 teeth material steel SKU: 12712400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-24-teeth-material-steel-sku-12712400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 23 teeth material steel SKU: 12712300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-23-teeth-material-steel-sku-12712300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 18 teeth material steel SKU: 12811800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-18-teeth-material-steel-sku-12811800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 17 teeth material steel SKU: 12811700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-17-teeth-material-steel-sku-12811700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 16 teeth material steel SKU: 12811600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-16-teeth-material-steel-sku-12811600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 15 teeth material steel SKU: 12811500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-15-teeth-material-steel-sku-12811500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 14 teeth material steel SKU: 12811400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-14-teeth-material-steel-sku-12811400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 13 teeth material steel SKU: 12811300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-13-teeth-material-steel-sku-12811300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 12 teeth material steel SKU: 12811200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-12-teeth-material-steel-sku-12811200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 11 teeth material steel SKU: 12811100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-11-teeth-material-steel-sku-12811100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 10 teeth material steel SKU: 12811000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-10-teeth-material-steel-sku-12811000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 9 teeth material steel SKU: 12810900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-9-teeth-material-steel-sku-12810900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 8 teeth material steel SKU: 12810800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-8-teeth-material-steel-sku-12810800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 25 teeth material steel teeth hardened SKU: 12788525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-25-teeth-material-steel-teeth-hardened-sku-12788525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 23 teeth material steel teeth hardened SKU: 12788523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-23-teeth-material-steel-teeth-hardened-sku-12788523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 21 teeth material steel teeth hardened SKU: 12788521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-21-teeth-material-steel-teeth-hardened-sku-12788521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 20 teeth material steel teeth hardened SKU: 12788520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-20-teeth-material-steel-teeth-hardened-sku-12788520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 19 teeth material steel teeth hardened SKU: 12788519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-19-teeth-material-steel-teeth-hardened-sku-12788519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 18 teeth material steel teeth hardened SKU: 12788518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-18-teeth-material-steel-teeth-hardened-sku-12788518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 17 teeth material steel teeth hardened SKU: 12788517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-17-teeth-material-steel-teeth-hardened-sku-12788517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 16 teeth material steel teeth hardened SKU: 12788516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-16-teeth-material-steel-teeth-hardened-sku-12788516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 15 teeth material steel teeth hardened SKU: 12788515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-15-teeth-material-steel-teeth-hardened-sku-12788515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 14 teeth material steel teeth hardened SKU: 12788514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-14-teeth-material-steel-teeth-hardened-sku-12788514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 13 teeth material steel teeth hardened SKU: 12788513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-13-teeth-material-steel-teeth-hardened-sku-12788513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 12 teeth material steel teeth hardened SKU: 12788512](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-12-teeth-material-steel-teeth-hardened-sku-12788512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 25 teeth material steel teeth hardened SKU: 12788425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-25-teeth-material-steel-teeth-hardened-sku-12788425/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 23 teeth material steel teeth hardened SKU: 12788423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-23-teeth-material-steel-teeth-hardened-sku-12788423/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 21 teeth material steel teeth hardened SKU: 12788421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-21-teeth-material-steel-teeth-hardened-sku-12788421/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 20 teeth material steel teeth hardened SKU: 12788420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-20-teeth-material-steel-teeth-hardened-sku-12788420/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 19 teeth material steel teeth hardened SKU: 12788419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-19-teeth-material-steel-teeth-hardened-sku-12788419/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 18 teeth material steel teeth hardened SKU: 12788418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-18-teeth-material-steel-teeth-hardened-sku-12788418/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 17 teeth material steel teeth hardened SKU: 12788417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-17-teeth-material-steel-teeth-hardened-sku-12788417/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 16 teeth material steel teeth hardened SKU: 12788416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-16-teeth-material-steel-teeth-hardened-sku-12788416/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 15 teeth material steel teeth hardened SKU: 12788415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-15-teeth-material-steel-teeth-hardened-sku-12788415/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 14 teeth material steel teeth hardened SKU: 12788414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-14-teeth-material-steel-teeth-hardened-sku-12788414/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 13 teeth material steel teeth hardened SKU: 12788413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-13-teeth-material-steel-teeth-hardened-sku-12788413/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 12 teeth material steel teeth hardened SKU: 12788412](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-12-teeth-material-steel-teeth-hardened-sku-12788412/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 38 teeth material steel teeth induction hardened SKU: 12788138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-38-teeth-material-steel-teeth-induction-hardened-sku-12788138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 32 teeth material steel teeth induction hardened SKU: 12788132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-32-teeth-material-steel-teeth-induction-hardened-sku-12788132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 30 teeth material steel teeth induction hardened SKU: 12788130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-30-teeth-material-steel-teeth-induction-hardened-sku-12788130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 25 teeth material steel teeth induction hardened SKU: 12788125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-25-teeth-material-steel-teeth-induction-hardened-sku-12788125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 24 teeth material steel teeth induction hardened SKU: 12788124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-24-teeth-material-steel-teeth-induction-hardened-sku-12788124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 23 teeth material steel teeth induction hardened SKU: 12788123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-23-teeth-material-steel-teeth-induction-hardened-sku-12788123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 22 teeth material steel teeth induction hardened SKU: 12788122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-22-teeth-material-steel-teeth-induction-hardened-sku-12788122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 21 teeth material steel teeth induction hardened SKU: 12788121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-21-teeth-material-steel-teeth-induction-hardened-sku-12788121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 20 teeth material steel teeth induction hardened SKU: 12788120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-20-teeth-material-steel-teeth-induction-hardened-sku-12788120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 19 teeth material steel teeth induction hardened SKU: 12788119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-19-teeth-material-steel-teeth-induction-hardened-sku-12788119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 18 teeth material steel teeth induction hardened SKU: 12788118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-18-teeth-material-steel-teeth-induction-hardened-sku-12788118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 17 teeth material steel teeth induction hardened SKU: 12788117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-17-teeth-material-steel-teeth-induction-hardened-sku-12788117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 16 teeth material steel teeth induction hardened SKU: 12788116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-16-teeth-material-steel-teeth-induction-hardened-sku-12788116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 15 teeth material steel teeth induction hardened SKU: 12788115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-15-teeth-material-steel-teeth-induction-hardened-sku-12788115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 14 teeth material steel teeth induction hardened SKU: 12788114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-14-teeth-material-steel-teeth-induction-hardened-sku-12788114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 13 teeth material steel teeth induction hardened SKU: 12788113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-13-teeth-material-steel-teeth-induction-hardened-sku-12788113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 12 teeth material steel teeth induction hardened SKU: 12788112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-12-teeth-material-steel-teeth-induction-hardened-sku-12788112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 11 teeth material steel teeth induction hardened SKU: 12788111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-11-teeth-material-steel-teeth-induction-hardened-sku-12788111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 10 teeth material steel teeth induction hardened SKU: 12788110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-10-teeth-material-steel-teeth-induction-hardened-sku-12788110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 9 teeth material steel teeth induction hardened SKU: 12788109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-9-teeth-material-steel-teeth-induction-hardened-sku-12788109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 8 teeth material steel teeth induction hardened SKU: 12788108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-8-teeth-material-steel-teeth-induction-hardened-sku-12788108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 12 B-2 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782540](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782540/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782535](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782535/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782440](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782440/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782435](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782435/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782430](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782430/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782345](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782345/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782340](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782340/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782335](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782335/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782240](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782240/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782235](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782235/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782230](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782230/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782145](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782145/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782140](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782140/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782135](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782135/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782040](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782040/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781940](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781940/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781935](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781935/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781930](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781930/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781840](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781840/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781835](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781835/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781830](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781830/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781740](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781740/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781735](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781735/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781730](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781730/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZREG for 2 single roller chains 16 B-1 19 teeth material steel teeth hardened SKU: 12888419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-19-teeth-material-steel-teeth-hardened-sku-12888419/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 18 teeth material steel teeth hardened SKU: 12888418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-18-teeth-material-steel-teeth-hardened-sku-12888418/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 17 teeth material steel teeth hardened SKU: 12888417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-17-teeth-material-steel-teeth-hardened-sku-12888417/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 16 teeth material steel teeth hardened SKU: 12888416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-16-teeth-material-steel-teeth-hardened-sku-12888416/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 15 teeth material steel teeth hardened SKU: 12888415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-15-teeth-material-steel-teeth-hardened-sku-12888415/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 14 teeth material steel teeth hardened SKU: 12888414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-14-teeth-material-steel-teeth-hardened-sku-12888414/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 13 teeth material steel teeth hardened SKU: 12888413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-13-teeth-material-steel-teeth-hardened-sku-12888413/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 12 teeth material steel teeth hardened SKU: 12888412](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-12-teeth-material-steel-teeth-hardened-sku-12888412/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 30 teeth material steel teeth induction hardened SKU: 12888130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-30-teeth-material-steel-teeth-induction-hardened-sku-12888130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 25 teeth material steel teeth induction hardened SKU: 12888125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-25-teeth-material-steel-teeth-induction-hardened-sku-12888125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 23 teeth material steel teeth induction hardened SKU: 12888123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-23-teeth-material-steel-teeth-induction-hardened-sku-12888123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 21 teeth material steel teeth induction hardened SKU: 12888121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-21-teeth-material-steel-teeth-induction-hardened-sku-12888121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 20 teeth material steel teeth induction hardened SKU: 12888120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-20-teeth-material-steel-teeth-induction-hardened-sku-12888120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 19 teeth material steel teeth induction hardened SKU: 12888119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-19-teeth-material-steel-teeth-induction-hardened-sku-12888119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 18 teeth material steel teeth induction hardened SKU: 12888118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-18-teeth-material-steel-teeth-induction-hardened-sku-12888118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 17 teeth material steel teeth induction hardened SKU: 12888117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-17-teeth-material-steel-teeth-induction-hardened-sku-12888117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 16 teeth material steel teeth induction hardened SKU: 12888116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-16-teeth-material-steel-teeth-induction-hardened-sku-12888116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 15 teeth material steel teeth induction hardened SKU: 12888115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-15-teeth-material-steel-teeth-induction-hardened-sku-12888115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 14 teeth material steel teeth induction hardened SKU: 12888114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-14-teeth-material-steel-teeth-induction-hardened-sku-12888114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 13 teeth material steel teeth induction hardened SKU: 12888113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-13-teeth-material-steel-teeth-induction-hardened-sku-12888113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 12 teeth material steel teeth induction hardened SKU: 12888112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-12-teeth-material-steel-teeth-induction-hardened-sku-12888112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 11 teeth material steel teeth induction hardened SKU: 12888111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-11-teeth-material-steel-teeth-induction-hardened-sku-12888111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 10 teeth material steel teeth induction hardened SKU: 12888110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-10-teeth-material-steel-teeth-induction-hardened-sku-12888110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 9 teeth material steel teeth induction hardened SKU: 12888109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-9-teeth-material-steel-teeth-induction-hardened-sku-12888109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 8 teeth material steel teeth induction hardened SKU: 12888108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-8-teeth-material-steel-teeth-induction-hardened-sku-12888108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double sprocket ZRET for 2 single roller chains 16 B-1 25 teeth material steel for taper-bush 3525 SKU: 12877425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-25-teeth-material-steel-for-taper-bush-3525-sku-12877425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 23 teeth material steel for taper-bush 3525 SKU: 12877423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-23-teeth-material-steel-for-taper-bush-3525-sku-12877423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 21 teeth material steel for taper-bush 3020 SKU: 12877421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-21-teeth-material-steel-for-taper-bush-3020-sku-12877421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 20 teeth material steel for taper-bush 3020 SKU: 12877420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-20-teeth-material-steel-for-taper-bush-3020-sku-12877420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 19 teeth material steel for taper-bush 2517 SKU: 12877419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-19-teeth-material-steel-for-taper-bush-2517-sku-12877419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 18 teeth material steel for taper-bush 2517 SKU: 12877418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-18-teeth-material-steel-for-taper-bush-2517-sku-12877418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 17 teeth material steel for taper-bush 2517 SKU: 12877417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-17-teeth-material-steel-for-taper-bush-2517-sku-12877417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 16 teeth material steel for taper-bush 2012 SKU: 12877416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-16-teeth-material-steel-for-taper-bush-2012-sku-12877416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 15 teeth material steel for taper-bush 2012 SKU: 12877415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-15-teeth-material-steel-for-taper-bush-2012-sku-12877415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 14 teeth material steel for taper-bush 2012 SKU: 12877414](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-14-teeth-material-steel-for-taper-bush-2012-sku-12877414/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 13 teeth material steel for taper-bush 1615 SKU: 12877413](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-13-teeth-material-steel-for-taper-bush-1615-sku-12877413/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 12 teeth material steel for taper-bush 1615 SKU: 12877412](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-12-teeth-material-steel-for-taper-bush-1615-sku-12877412/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 114 teeth material cast iron for taper bush type 4040 SKU: 12877188G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-114-teeth-material-cast-iron-for-taper-bush-type-4040-sku-12877188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 95 teeth material cast iron for taper bush type 4040 SKU: 12877183G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-95-teeth-material-cast-iron-for-taper-bush-type-4040-sku-12877183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 76 teeth material cast iron for taper bush type 3535 SKU: 12877176G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-76-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12877176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 76 teeth material steel for taper bush type 3525 SKU: 12877176](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-76-teeth-material-steel-for-taper-bush-type-3525-sku-12877176/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 57 teeth material cast iron for taper bush type 3535 SKU: 12877157G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-57-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12877157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 57 teeth material steel for taper bush type 3525 SKU: 12877157](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-57-teeth-material-steel-for-taper-bush-type-3525-sku-12877157/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 45 teeth material cast iron for taper bush type 3030 SKU: 12877145G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-45-teeth-material-cast-iron-for-taper-bush-type-3030-sku-12877145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 45 teeth material steel for taper bush type 3020 SKU: 12877145](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-45-teeth-material-steel-for-taper-bush-type-3020-sku-12877145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 38 teeth material cast iron for taper bush type 3030 SKU: 12877138G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-38-teeth-material-cast-iron-for-taper-bush-type-3030-sku-12877138g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 38 teeth material steel for taper bush type 3020 SKU: 12877138](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-38-teeth-material-steel-for-taper-bush-type-3020-sku-12877138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 30 teeth material steel for taper bush type 3020 SKU: 12877130](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-30-teeth-material-steel-for-taper-bush-type-3020-sku-12877130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 28 teeth material steel for taper bush type 3020 SKU: 12877128](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-28-teeth-material-steel-for-taper-bush-type-3020-sku-12877128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 27 teeth material steel for taper bush type 3020 SKU: 12877127](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-27-teeth-material-steel-for-taper-bush-type-3020-sku-12877127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 26 teeth material steel for taper bush type 3020 SKU: 12877126](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-26-teeth-material-steel-for-taper-bush-type-3020-sku-12877126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 25 teeth material steel for taper bush type 3020 SKU: 12877125](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-25-teeth-material-steel-for-taper-bush-type-3020-sku-12877125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 24 teeth material steel for taper bush type 3020 SKU: 12877124](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-24-teeth-material-steel-for-taper-bush-type-3020-sku-12877124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 23 teeth material steel for taper bush type 3020 SKU: 12877123](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-23-teeth-material-steel-for-taper-bush-type-3020-sku-12877123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 22 teeth material steel for taper bush type 3020 SKU: 12877122](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-22-teeth-material-steel-for-taper-bush-type-3020-sku-12877122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 21 teeth material steel for taper bush type 3020 SKU: 12877121](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-21-teeth-material-steel-for-taper-bush-type-3020-sku-12877121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 20 teeth material steel for taper bush type 2517 SKU: 12877120](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-20-teeth-material-steel-for-taper-bush-type-2517-sku-12877120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 19 teeth material steel for taper bush type 2517 SKU: 12877119](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-19-teeth-material-steel-for-taper-bush-type-2517-sku-12877119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 18 teeth material steel for taper bush type 2517 SKU: 12877118](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-18-teeth-material-steel-for-taper-bush-type-2517-sku-12877118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 17 teeth material steel for taper bush type 2517 SKU: 12877117](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-17-teeth-material-steel-for-taper-bush-type-2517-sku-12877117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 16 teeth material steel for taper bush type 2517 SKU: 12877116](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-16-teeth-material-steel-for-taper-bush-type-2517-sku-12877116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 15 teeth material steel for taper bush type 2012 SKU: 12877115](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-15-teeth-material-steel-for-taper-bush-type-2012-sku-12877115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 14 teeth material steel for taper bush type 1610 SKU: 12877114](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-14-teeth-material-steel-for-taper-bush-type-1610-sku-12877114/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 13 teeth material steel for taper bush type 1610 SKU: 12877113](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-13-teeth-material-steel-for-taper-bush-type-1610-sku-12877113/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 16 B-1 21 teeth material steel SKU: 12842100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-21-teeth-material-steel-sku-12842100/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 19 teeth material steel SKU: 12841900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-19-teeth-material-steel-sku-12841900/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 18 teeth material steel SKU: 12841800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-18-teeth-material-steel-sku-12841800/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 17 teeth material steel SKU: 12841700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-17-teeth-material-steel-sku-12841700/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 16 teeth material steel SKU: 12841600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-16-teeth-material-steel-sku-12841600/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 15 teeth material steel SKU: 12841500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-15-teeth-material-steel-sku-12841500/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 14 teeth material steel SKU: 12841400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-14-teeth-material-steel-sku-12841400/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 13 teeth material steel SKU: 12841300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-13-teeth-material-steel-sku-12841300/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 12 teeth material steel SKU: 12841200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-12-teeth-material-steel-sku-12841200/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 57 teeth material steel SKU: 12825700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-57-teeth-material-steel-sku-12825700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 48 teeth material steel SKU: 12824800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-48-teeth-material-steel-sku-12824800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 45 teeth material steel SKU: 12824500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-45-teeth-material-steel-sku-12824500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 38 teeth material steel SKU: 12823800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-38-teeth-material-steel-sku-12823800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 36 teeth material steel SKU: 12823600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-36-teeth-material-steel-sku-12823600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 35 teeth material steel SKU: 12823500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-35-teeth-material-steel-sku-12823500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 30 teeth material steel SKU: 12823000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-30-teeth-material-steel-sku-12823000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 27 teeth material steel SKU: 12822700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-27-teeth-material-steel-sku-12822700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 24 teeth material steel SKU: 12822400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-24-teeth-material-steel-sku-12822400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 22 teeth material steel SKU: 12822200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-22-teeth-material-steel-sku-12822200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 20 teeth material steel SKU: 12822000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-20-teeth-material-steel-sku-12822000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 18 teeth material steel SKU: 12821800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-18-teeth-material-steel-sku-12821800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 16 teeth material steel SKU: 12821600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-16-teeth-material-steel-sku-12821600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 14 teeth material steel SKU: 12821400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-14-teeth-material-steel-sku-12821400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 12 teeth material steel SKU: 12821200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-12-teeth-material-steel-sku-12821200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 11 teeth material steel SKU: 12821100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-11-teeth-material-steel-sku-12821100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 76 teeth material cast iron SKU: 12817600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-76-teeth-material-cast-iron-sku-12817600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 57 teeth material cast iron SKU: 12815700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-57-teeth-material-cast-iron-sku-12815700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 45 teeth material cast iron SKU: 12814500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-45-teeth-material-cast-iron-sku-12814500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 38 teeth material cast iron SKU: 12813800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-38-teeth-material-cast-iron-sku-12813800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 30 teeth material steel SKU: 12813000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-30-teeth-material-steel-sku-12813000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 25 teeth material steel SKU: 12812500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-25-teeth-material-steel-sku-12812500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 24 teeth material steel SKU: 12812400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-24-teeth-material-steel-sku-12812400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 23 teeth material steel SKU: 12812300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-23-teeth-material-steel-sku-12812300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 21 teeth material steel SKU: 12812100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-21-teeth-material-steel-sku-12812100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 20 teeth material steel SKU: 12812000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-20-teeth-material-steel-sku-12812000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 19 teeth material steel SKU: 12811900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-19-teeth-material-steel-sku-12811900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 29 teeth material steel SKU: 13122900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-29-teeth-material-steel-sku-13122900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 28 teeth material steel SKU: 13122800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-28-teeth-material-steel-sku-13122800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 27 teeth material steel SKU: 13122700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-27-teeth-material-steel-sku-13122700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 26 teeth material steel SKU: 13122600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-26-teeth-material-steel-sku-13122600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 25 teeth material steel SKU: 13122500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-25-teeth-material-steel-sku-13122500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 24 teeth material steel SKU: 13122400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-24-teeth-material-steel-sku-13122400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 23 teeth material steel SKU: 13122300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-23-teeth-material-steel-sku-13122300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 22 teeth material steel SKU: 13122200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-22-teeth-material-steel-sku-13122200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 21 teeth material steel SKU: 13122100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-21-teeth-material-steel-sku-13122100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 20 teeth material steel SKU: 13122000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-20-teeth-material-steel-sku-13122000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 19 teeth material steel SKU: 13121900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-19-teeth-material-steel-sku-13121900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 18 teeth material steel SKU: 13121800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-18-teeth-material-steel-sku-13121800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 17 teeth material steel SKU: 13121700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-17-teeth-material-steel-sku-13121700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 16 teeth material steel SKU: 13121600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-16-teeth-material-steel-sku-13121600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 15 teeth material steel SKU: 13121500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-15-teeth-material-steel-sku-13121500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 14 teeth material steel SKU: 13121400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-14-teeth-material-steel-sku-13121400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 13 teeth material steel SKU: 13121300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-13-teeth-material-steel-sku-13121300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 12 teeth material steel SKU: 13121200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-12-teeth-material-steel-sku-13121200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 11 teeth material steel SKU: 13121100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-11-teeth-material-steel-sku-13121100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 8 teeth material steel SKU: 13120800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-8-teeth-material-steel-sku-13120800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 114 teeth material cast iron SKU: 13118800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-114-teeth-material-cast-iron-sku-13118800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 95 teeth material cast iron SKU: 13118300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-95-teeth-material-cast-iron-sku-13118300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 76 teeth material cast iron SKU: 13117600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-76-teeth-material-cast-iron-sku-13117600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 57 teeth material cast iron SKU: 13115700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-57-teeth-material-cast-iron-sku-13115700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 45 teeth material cast iron SKU: 13114500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-45-teeth-material-cast-iron-sku-13114500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 38 teeth material steel SKU: 13113800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-38-teeth-material-steel-sku-13113800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 35 teeth material steel SKU: 13113500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-35-teeth-material-steel-sku-13113500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 32 teeth material steel SKU: 13113200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-32-teeth-material-steel-sku-13113200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 30 teeth material steel SKU: 13113000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-30-teeth-material-steel-sku-13113000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 29 teeth material steel SKU: 13112900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-29-teeth-material-steel-sku-13112900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 28 teeth material steel SKU: 13112800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-28-teeth-material-steel-sku-13112800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 27 teeth material steel SKU: 13112700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-27-teeth-material-steel-sku-13112700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 26 teeth material steel SKU: 13112600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-26-teeth-material-steel-sku-13112600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 25 teeth material steel SKU: 13112500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-25-teeth-material-steel-sku-13112500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 24 teeth material steel SKU: 13112400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-24-teeth-material-steel-sku-13112400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 23 teeth material steel SKU: 13112300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-23-teeth-material-steel-sku-13112300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 22 teeth material steel SKU: 13112200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-22-teeth-material-steel-sku-13112200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 21 teeth material steel SKU: 13112100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-21-teeth-material-steel-sku-13112100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 20 teeth material steel SKU: 13112000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-20-teeth-material-steel-sku-13112000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 19 teeth material steel SKU: 13111900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-19-teeth-material-steel-sku-13111900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 18 teeth material steel SKU: 13111800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-18-teeth-material-steel-sku-13111800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 17 teeth material steel SKU: 13111700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-17-teeth-material-steel-sku-13111700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 16 teeth material steel SKU: 13111600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-16-teeth-material-steel-sku-13111600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 15 teeth material steel SKU: 13111500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-15-teeth-material-steel-sku-13111500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 14 teeth material steel SKU: 13111400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-14-teeth-material-steel-sku-13111400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 13 teeth material steel SKU: 13111300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-13-teeth-material-steel-sku-13111300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 12 teeth material steel SKU: 13111200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-12-teeth-material-steel-sku-13111200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 11 teeth material steel SKU: 13111100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-11-teeth-material-steel-sku-13111100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 10 teeth material steel SKU: 13111000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-10-teeth-material-steel-sku-13111000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 8 teeth material steel SKU: 13110800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-8-teeth-material-steel-sku-13110800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRT 24 B-2 1 1/2" x 1" 76 teeth material cast iron for taper bush type 4040 SKU: 12977576G](https://maedler.in/product/double-strand-sprocket-zrt-24-b-2-1-1-2-x-1-76-teeth-material-cast-iron-for-taper-bush-type-4040-sku-12977576g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 24 B-2 1 1/2" x 1" 57 teeth material cast iron for taper bush type 3535 SKU: 12977557G](https://maedler.in/product/double-strand-sprocket-zrt-24-b-2-1-1-2-x-1-57-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977557g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 24 B-2 1 1/2" x 1" 45 teeth material cast iron for taper bush type 3535 SKU: 12977545G](https://maedler.in/product/double-strand-sprocket-zrt-24-b-2-1-1-2-x-1-45-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977545g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 24 B-2 1 1/2" x 1" 38 teeth material cast iron for taper bush type 3535 SKU: 12977538G](https://maedler.in/product/double-strand-sprocket-zrt-24-b-2-1-1-2-x-1-38-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977538g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 20 B-2 1 1/4" x 3/4" 76 teeth material cast iron for taper bush type 3535 SKU: 12977176G](https://maedler.in/product/double-strand-sprocket-zrt-20-b-2-1-1-4-x-3-4-76-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977176g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 20 B-2 1 1/4" x 3/4" 57 teeth material cast iron for taper bush type 3535 SKU: 12977157G](https://maedler.in/product/double-strand-sprocket-zrt-20-b-2-1-1-4-x-3-4-57-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977157g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 20 B-2 1 1/4" x 3/4" 38 teeth material cast iron for taper bush type 3030 SKU: 12977138G](https://maedler.in/product/double-strand-sprocket-zrt-20-b-2-1-1-4-x-3-4-38-teeth-material-cast-iron-for-taper-bush-type-3030-sku-12977138g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 30 teeth material steel SKU: 12953000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-30-teeth-material-steel-sku-12953000/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 25 teeth material steel SKU: 12952500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-25-teeth-material-steel-sku-12952500/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 20 teeth material steel SKU: 12952000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-20-teeth-material-steel-sku-12952000/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 19 teeth material steel SKU: 12951900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-19-teeth-material-steel-sku-12951900/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 18 teeth material steel SKU: 12951800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-18-teeth-material-steel-sku-12951800/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 17 teeth material steel SKU: 12951700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-17-teeth-material-steel-sku-12951700/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 16 teeth material steel SKU: 12951600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-16-teeth-material-steel-sku-12951600/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 15 teeth material steel SKU: 12951500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-15-teeth-material-steel-sku-12951500/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 14 teeth material steel SKU: 12951400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-14-teeth-material-steel-sku-12951400/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 13 teeth material steel SKU: 12951300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-13-teeth-material-steel-sku-12951300/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 12 teeth material steel SKU: 12951200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-12-teeth-material-steel-sku-12951200/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 11 teeth material steel SKU: 12951100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-11-teeth-material-steel-sku-12951100/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 10 teeth material steel SKU: 12951000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-10-teeth-material-steel-sku-12951000/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 30 teeth material steel SKU: 12913000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-30-teeth-material-steel-sku-12913000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 26 teeth material steel SKU: 12912600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-26-teeth-material-steel-sku-12912600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 25 teeth material steel SKU: 12912500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-25-teeth-material-steel-sku-12912500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 21 teeth material steel SKU: 12912100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-21-teeth-material-steel-sku-12912100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 20 teeth material steel SKU: 12912000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-20-teeth-material-steel-sku-12912000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 19 teeth material steel SKU: 12911900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-19-teeth-material-steel-sku-12911900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 18 teeth material steel SKU: 12911800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-18-teeth-material-steel-sku-12911800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 17 teeth material steel SKU: 12911700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-17-teeth-material-steel-sku-12911700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 16 teeth material steel SKU: 12911600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-16-teeth-material-steel-sku-12911600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 15 teeth material steel SKU: 12911500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-15-teeth-material-steel-sku-12911500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 14 teeth material steel SKU: 12911400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-14-teeth-material-steel-sku-12911400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 13 teeth material steel SKU: 12911300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-13-teeth-material-steel-sku-12911300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 12 teeth material steel SKU: 12911200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-12-teeth-material-steel-sku-12911200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 11 teeth material steel SKU: 12911100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-11-teeth-material-steel-sku-12911100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 10 teeth material steel SKU: 12911000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-10-teeth-material-steel-sku-12911000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 21 teeth material steel teeth hardened SKU: 12888521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-21-teeth-material-steel-teeth-hardened-sku-12888521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 19 teeth material steel teeth hardened SKU: 12888519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-19-teeth-material-steel-teeth-hardened-sku-12888519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 18 teeth material steel teeth hardened SKU: 12888518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-18-teeth-material-steel-teeth-hardened-sku-12888518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 17 teeth material steel teeth hardened SKU: 12888517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-17-teeth-material-steel-teeth-hardened-sku-12888517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 16 teeth material steel teeth hardened SKU: 12888516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-16-teeth-material-steel-teeth-hardened-sku-12888516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 15 teeth material steel teeth hardened SKU: 12888515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-15-teeth-material-steel-teeth-hardened-sku-12888515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 14 teeth material steel teeth hardened SKU: 12888514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-14-teeth-material-steel-teeth-hardened-sku-12888514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 13 teeth material steel teeth hardened SKU: 12888513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-13-teeth-material-steel-teeth-hardened-sku-12888513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 12 teeth material steel teeth hardened SKU: 12888512](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-12-teeth-material-steel-teeth-hardened-sku-12888512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 21 teeth material steel teeth hardened SKU: 12888421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-21-teeth-material-steel-teeth-hardened-sku-12888421/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 21 teeth material steel SKU: 13612100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-21-teeth-material-steel-sku-13612100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 20 teeth material steel SKU: 13612000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-20-teeth-material-steel-sku-13612000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 19 teeth material steel SKU: 13611900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-19-teeth-material-steel-sku-13611900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 18 teeth material steel SKU: 13611800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-18-teeth-material-steel-sku-13611800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 17 teeth material steel SKU: 13611700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-17-teeth-material-steel-sku-13611700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 16 teeth material steel SKU: 13611600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-16-teeth-material-steel-sku-13611600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 15 teeth material steel SKU: 13611500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-15-teeth-material-steel-sku-13611500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 14 teeth material steel SKU: 13611400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-14-teeth-material-steel-sku-13611400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 13 teeth material steel SKU: 13611300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-13-teeth-material-steel-sku-13611300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 12 teeth material steel SKU: 13611200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-12-teeth-material-steel-sku-13611200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 11 teeth material steel SKU: 13611100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-11-teeth-material-steel-sku-13611100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 10 teeth material steel SKU: 13611000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-10-teeth-material-steel-sku-13611000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 8 teeth material steel SKU: 13610800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-8-teeth-material-steel-sku-13610800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 38 teeth material steel for taper bush type 2012 SKU: 13577138](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-38-teeth-material-steel-for-taper-bush-type-2012-sku-13577138/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 30 teeth material steel for taper bush type 2012 SKU: 13577130](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-30-teeth-material-steel-for-taper-bush-type-2012-sku-13577130/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 27 teeth material steel for taper bush type 2012 SKU: 13577127](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-27-teeth-material-steel-for-taper-bush-type-2012-sku-13577127/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 25 teeth material steel for taper bush type 2012 SKU: 13577125](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-25-teeth-material-steel-for-taper-bush-type-2012-sku-13577125/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 23 teeth material steel for taper bush type 1610 SKU: 13577123](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-23-teeth-material-steel-for-taper-bush-type-1610-sku-13577123/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 21 teeth material steel for taper bush type 1610 SKU: 13577121](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-21-teeth-material-steel-for-taper-bush-type-1610-sku-13577121/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 19 teeth material steel for taper bush type 1210 SKU: 13577119](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-19-teeth-material-steel-for-taper-bush-type-1210-sku-13577119/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 17 teeth material steel for taper bush type 1210 SKU: 13577117](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-17-teeth-material-steel-for-taper-bush-type-1210-sku-13577117/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 15 teeth material steel for taper bush type 1008 SKU: 13577115](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-15-teeth-material-steel-for-taper-bush-type-1008-sku-13577115/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 95 teeth material steel SKU: 13528300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-95-teeth-material-steel-sku-13528300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 76 teeth material steel SKU: 13527600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-76-teeth-material-steel-sku-13527600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 57 teeth material steel SKU: 13525700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-57-teeth-material-steel-sku-13525700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 54 teeth material steel SKU: 13525400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-54-teeth-material-steel-sku-13525400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 45 teeth material steel SKU: 13524500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-45-teeth-material-steel-sku-13524500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 40 teeth material steel SKU: 13524000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-40-teeth-material-steel-sku-13524000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 38 teeth material steel SKU: 13523800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-38-teeth-material-steel-sku-13523800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 36 teeth material steel SKU: 13523600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-36-teeth-material-steel-sku-13523600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 35 teeth material steel SKU: 13523500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-35-teeth-material-steel-sku-13523500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 33 teeth material steel SKU: 13523300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-33-teeth-material-steel-sku-13523300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 30 teeth material steel SKU: 13523000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-30-teeth-material-steel-sku-13523000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 29 teeth material steel SKU: 13522900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-29-teeth-material-steel-sku-13522900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 28 teeth material steel SKU: 13522800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-28-teeth-material-steel-sku-13522800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 27 teeth material steel SKU: 13522700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-27-teeth-material-steel-sku-13522700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 26 teeth material steel SKU: 13522600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-26-teeth-material-steel-sku-13522600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 25 teeth material steel SKU: 13522500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-25-teeth-material-steel-sku-13522500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 24 teeth material steel SKU: 13522400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-24-teeth-material-steel-sku-13522400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 23 teeth material steel SKU: 13522300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-23-teeth-material-steel-sku-13522300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 22 teeth material steel SKU: 13522200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-22-teeth-material-steel-sku-13522200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 21 teeth material steel SKU: 13522100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-21-teeth-material-steel-sku-13522100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 20 teeth material steel SKU: 13522000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-20-teeth-material-steel-sku-13522000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 19 teeth material steel SKU: 13521900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-19-teeth-material-steel-sku-13521900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 18 teeth material steel SKU: 13521800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-18-teeth-material-steel-sku-13521800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 17 teeth material steel SKU: 13521700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-17-teeth-material-steel-sku-13521700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 16 teeth material steel SKU: 13521600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-16-teeth-material-steel-sku-13521600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 15 teeth material steel SKU: 13521500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-15-teeth-material-steel-sku-13521500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 14 teeth material steel SKU: 13521400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-14-teeth-material-steel-sku-13521400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 13 teeth material steel SKU: 13521300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-13-teeth-material-steel-sku-13521300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 12 teeth material steel SKU: 13521200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-12-teeth-material-steel-sku-13521200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 11 teeth material steel SKU: 13521100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-11-teeth-material-steel-sku-13521100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 10 teeth material steel SKU: 13521000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-10-teeth-material-steel-sku-13521000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 8 teeth material steel SKU: 13520800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-8-teeth-material-steel-sku-13520800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 95 teeth material cast iron SKU: 13518300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-95-teeth-material-cast-iron-sku-13518300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 76 teeth material cast iron SKU: 13517600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-76-teeth-material-cast-iron-sku-13517600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 57 teeth material cast iron SKU: 13515700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-57-teeth-material-cast-iron-sku-13515700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 45 teeth material cast iron SKU: 13514500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-45-teeth-material-cast-iron-sku-13514500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 38 teeth material steel SKU: 13513800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-38-teeth-material-steel-sku-13513800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 36 teeth material steel SKU: 13513600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-36-teeth-material-steel-sku-13513600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 35 teeth material steel SKU: 13513500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-35-teeth-material-steel-sku-13513500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 30 teeth material steel SKU: 13513000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-30-teeth-material-steel-sku-13513000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 29 teeth material steel SKU: 13512900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-29-teeth-material-steel-sku-13512900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 28 teeth material steel SKU: 13512800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-28-teeth-material-steel-sku-13512800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 27 teeth material steel SKU: 13512700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-27-teeth-material-steel-sku-13512700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 26 teeth material steel SKU: 13512600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-26-teeth-material-steel-sku-13512600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 25 teeth material steel SKU: 13512500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-25-teeth-material-steel-sku-13512500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 24 teeth material steel SKU: 13512400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-24-teeth-material-steel-sku-13512400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 23 teeth material steel SKU: 13512300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-23-teeth-material-steel-sku-13512300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 22 teeth material steel SKU: 13512200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-22-teeth-material-steel-sku-13512200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 21 teeth material steel SKU: 13512100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-21-teeth-material-steel-sku-13512100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 20 teeth material steel SKU: 13512000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-20-teeth-material-steel-sku-13512000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 19 teeth material steel SKU: 13511900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-19-teeth-material-steel-sku-13511900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 18 teeth material steel SKU: 13511800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-18-teeth-material-steel-sku-13511800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 17 teeth material steel SKU: 13511700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-17-teeth-material-steel-sku-13511700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 16 teeth material steel SKU: 13511600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-16-teeth-material-steel-sku-13511600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 15 teeth material steel SKU: 13511500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-15-teeth-material-steel-sku-13511500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 14 teeth material steel SKU: 13511400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-14-teeth-material-steel-sku-13511400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 13 teeth material steel SKU: 13511300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-13-teeth-material-steel-sku-13511300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 12 teeth material steel SKU: 13511200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-12-teeth-material-steel-sku-13511200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 11 teeth material steel SKU: 13511100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-11-teeth-material-steel-sku-13511100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 10 teeth material steel SKU: 13511000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-10-teeth-material-steel-sku-13511000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 8 teeth material steel SKU: 13510800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-8-teeth-material-steel-sku-13510800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 38 teeth material steel for taper bush type 1615 SKU: 13177138](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-38-teeth-material-steel-for-taper-bush-type-1615-sku-13177138/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 30 teeth material steel for taper bush type 1615 SKU: 13177130](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-30-teeth-material-steel-for-taper-bush-type-1615-sku-13177130/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 27 teeth material steel for taper bush type 1210 SKU: 13177127](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-27-teeth-material-steel-for-taper-bush-type-1210-sku-13177127/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 25 teeth material steel for taper bush type 1210 SKU: 13177125](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-25-teeth-material-steel-for-taper-bush-type-1210-sku-13177125/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 23 teeth material steel for taper bush type 1210 SKU: 13177123](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-23-teeth-material-steel-for-taper-bush-type-1210-sku-13177123/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 21 teeth material steel for taper bush type 1008 SKU: 13177121](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-21-teeth-material-steel-for-taper-bush-type-1008-sku-13177121/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 19 teeth material steel for taper bush type 1008 SKU: 13177119](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-19-teeth-material-steel-for-taper-bush-type-1008-sku-13177119/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 17 teeth material steel for taper bush type 1008 SKU: 13177117](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-17-teeth-material-steel-for-taper-bush-type-1008-sku-13177117/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 95 teeth material steel SKU: 13128300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-95-teeth-material-steel-sku-13128300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 76 teeth material steel SKU: 13127600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-76-teeth-material-steel-sku-13127600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 57 teeth material steel SKU: 13125700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-57-teeth-material-steel-sku-13125700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 48 teeth material steel SKU: 13124800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-48-teeth-material-steel-sku-13124800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 45 teeth material steel SKU: 13124500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-45-teeth-material-steel-sku-13124500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 42 teeth material steel SKU: 13124200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-42-teeth-material-steel-sku-13124200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 40 teeth material steel SKU: 13124000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-40-teeth-material-steel-sku-13124000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 38 teeth material steel SKU: 13123800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-38-teeth-material-steel-sku-13123800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 30 teeth material steel SKU: 13123000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-30-teeth-material-steel-sku-13123000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 27 teeth material steel for taper bush type 3020 SKU: 13777127](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-27-teeth-material-steel-for-taper-bush-type-3020-sku-13777127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 25 teeth material steel for taper bush type 2517 SKU: 13777125](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-25-teeth-material-steel-for-taper-bush-type-2517-sku-13777125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 23 teeth material steel for taper bush type 2517 SKU: 13777123](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-23-teeth-material-steel-for-taper-bush-type-2517-sku-13777123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 21 teeth material steel for taper bush type 2517 SKU: 13777121](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-21-teeth-material-steel-for-taper-bush-type-2517-sku-13777121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 19 teeth material steel for taper bush type 2012 SKU: 13777119](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-19-teeth-material-steel-for-taper-bush-type-2012-sku-13777119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 17 teeth material steel for taper bush type 2012 SKU: 13777117](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-17-teeth-material-steel-for-taper-bush-type-2012-sku-13777117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 15 teeth material steel for taper bush type 1615 SKU: 13777115](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-15-teeth-material-steel-for-taper-bush-type-1615-sku-13777115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 95 teeth material steel SKU: 13728300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-95-teeth-material-steel-sku-13728300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 76 teeth material steel SKU: 13727600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-76-teeth-material-steel-sku-13727600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 57 teeth material steel SKU: 13725700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-57-teeth-material-steel-sku-13725700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 50 teeth material steel SKU: 13725000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-50-teeth-material-steel-sku-13725000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 48 teeth material steel SKU: 13724800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-48-teeth-material-steel-sku-13724800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 45 teeth material steel SKU: 13724500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-45-teeth-material-steel-sku-13724500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 40 teeth material steel SKU: 13724000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-40-teeth-material-steel-sku-13724000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 38 teeth material steel SKU: 13723800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-38-teeth-material-steel-sku-13723800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 35 teeth material steel SKU: 13723500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-35-teeth-material-steel-sku-13723500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 30 teeth material steel SKU: 13723000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-30-teeth-material-steel-sku-13723000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 25 teeth material steel SKU: 13722500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-25-teeth-material-steel-sku-13722500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 22 teeth material steel SKU: 13722200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-22-teeth-material-steel-sku-13722200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 21 teeth material steel SKU: 13722100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-21-teeth-material-steel-sku-13722100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 20 teeth material steel SKU: 13722000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-20-teeth-material-steel-sku-13722000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 19 teeth material steel SKU: 13721900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-19-teeth-material-steel-sku-13721900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 18 teeth material steel SKU: 13721800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-18-teeth-material-steel-sku-13721800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 17 teeth material steel SKU: 13721700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-17-teeth-material-steel-sku-13721700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 16 teeth material steel SKU: 13721600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-16-teeth-material-steel-sku-13721600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 15 teeth material steel SKU: 13721500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-15-teeth-material-steel-sku-13721500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 14 teeth material steel SKU: 13721400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-14-teeth-material-steel-sku-13721400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 13 teeth material steel SKU: 13721300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-13-teeth-material-steel-sku-13721300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 12 teeth material steel SKU: 13721200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-12-teeth-material-steel-sku-13721200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 11 teeth material steel SKU: 13721100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-11-teeth-material-steel-sku-13721100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 95 teeth material cast iron SKU: 13718300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-95-teeth-material-cast-iron-sku-13718300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 76 teeth material cast iron SKU: 13717600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-76-teeth-material-cast-iron-sku-13717600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 57 teeth material cast iron SKU: 13715700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-57-teeth-material-cast-iron-sku-13715700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 45 teeth material cast iron SKU: 13714500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-45-teeth-material-cast-iron-sku-13714500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 38 teeth material steel SKU: 13713800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-38-teeth-material-steel-sku-13713800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 30 teeth material steel SKU: 13713000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-30-teeth-material-steel-sku-13713000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 27 teeth material steel SKU: 13712700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-27-teeth-material-steel-sku-13712700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 25 teeth material steel SKU: 13712500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-25-teeth-material-steel-sku-13712500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 24 teeth material steel SKU: 13712400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-24-teeth-material-steel-sku-13712400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 23 teeth material steel SKU: 13712300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-23-teeth-material-steel-sku-13712300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 22 teeth material steel SKU: 13712200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-22-teeth-material-steel-sku-13712200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 21 teeth material steel SKU: 13712100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-21-teeth-material-steel-sku-13712100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 20 teeth material steel SKU: 13712000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-20-teeth-material-steel-sku-13712000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 19 teeth material steel SKU: 13711900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-19-teeth-material-steel-sku-13711900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 18 teeth material steel SKU: 13711800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-18-teeth-material-steel-sku-13711800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 17 teeth material steel SKU: 13711700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-17-teeth-material-steel-sku-13711700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 16 teeth material steel SKU: 13711600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-16-teeth-material-steel-sku-13711600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 15 teeth material steel SKU: 13711500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-15-teeth-material-steel-sku-13711500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 14 teeth material steel SKU: 13711400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-14-teeth-material-steel-sku-13711400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 13 teeth material steel SKU: 13711300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-13-teeth-material-steel-sku-13711300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 12 teeth material steel SKU: 13711200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-12-teeth-material-steel-sku-13711200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 11 teeth material steel SKU: 13711100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-11-teeth-material-steel-sku-13711100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 10 teeth material steel SKU: 13711000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-10-teeth-material-steel-sku-13711000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 8 teeth material steel SKU: 13710800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-8-teeth-material-steel-sku-13710800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 30 teeth material steel for taper bush type 2517 SKU: 13677130](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-30-teeth-material-steel-for-taper-bush-type-2517-sku-13677130/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 27 teeth material steel for taper bush type 2517 SKU: 13677127](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-27-teeth-material-steel-for-taper-bush-type-2517-sku-13677127/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 25 teeth material steel for taper bush type 2517 SKU: 13677125](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-25-teeth-material-steel-for-taper-bush-type-2517-sku-13677125/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 23 teeth material steel for taper bush type 2012 SKU: 13677123](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-23-teeth-material-steel-for-taper-bush-type-2012-sku-13677123/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 21 teeth material steel for taper bush type 1615 SKU: 13677121](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-21-teeth-material-steel-for-taper-bush-type-1615-sku-13677121/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 19 teeth material steel for taper bush type 1615 SKU: 13677119](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-19-teeth-material-steel-for-taper-bush-type-1615-sku-13677119/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 17 teeth material steel for taper bush type 1210 SKU: 13677117](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-17-teeth-material-steel-for-taper-bush-type-1210-sku-13677117/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 15 teeth material steel for taper bush type 1210 SKU: 13677115](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-15-teeth-material-steel-for-taper-bush-type-1210-sku-13677115/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 114 teeth material steel SKU: 13628800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-114-teeth-material-steel-sku-13628800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 95 teeth material steel SKU: 13628300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-95-teeth-material-steel-sku-13628300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 76 teeth material steel SKU: 13627600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-76-teeth-material-steel-sku-13627600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 57 teeth material steel SKU: 13625700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-57-teeth-material-steel-sku-13625700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 45 teeth material steel SKU: 13624500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-45-teeth-material-steel-sku-13624500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 38 teeth material steel SKU: 13623800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-38-teeth-material-steel-sku-13623800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 35 teeth material steel SKU: 13623500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-35-teeth-material-steel-sku-13623500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 30 teeth material steel SKU: 13623000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-30-teeth-material-steel-sku-13623000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 29 teeth material steel SKU: 13622900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-29-teeth-material-steel-sku-13622900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 28 teeth material steel SKU: 13622800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-28-teeth-material-steel-sku-13622800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 27 teeth material steel SKU: 13622700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-27-teeth-material-steel-sku-13622700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 25 teeth material steel SKU: 13622500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-25-teeth-material-steel-sku-13622500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 24 teeth material steel SKU: 13622400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-24-teeth-material-steel-sku-13622400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 23 teeth material steel SKU: 13622300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-23-teeth-material-steel-sku-13622300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 22 teeth material steel SKU: 13622200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-22-teeth-material-steel-sku-13622200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 21 teeth material steel SKU: 13622100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-21-teeth-material-steel-sku-13622100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 20 teeth material steel SKU: 13622000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-20-teeth-material-steel-sku-13622000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 19 teeth material steel SKU: 13621900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-19-teeth-material-steel-sku-13621900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 18 teeth material steel SKU: 13621800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-18-teeth-material-steel-sku-13621800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 17 teeth material steel SKU: 13621700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-17-teeth-material-steel-sku-13621700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 16 teeth material steel SKU: 13621600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-16-teeth-material-steel-sku-13621600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 15 teeth material steel SKU: 13621500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-15-teeth-material-steel-sku-13621500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 14 teeth material steel SKU: 13621400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-14-teeth-material-steel-sku-13621400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 13 teeth material steel SKU: 13621300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-13-teeth-material-steel-sku-13621300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 12 teeth material steel SKU: 13621200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-12-teeth-material-steel-sku-13621200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 8 teeth material steel SKU: 13620800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-8-teeth-material-steel-sku-13620800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 114 teeth material cast iron SKU: 13618800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-114-teeth-material-cast-iron-sku-13618800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 95 teeth material cast iron SKU: 13618300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-95-teeth-material-cast-iron-sku-13618300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 76 teeth material cast iron SKU: 13617600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-76-teeth-material-cast-iron-sku-13617600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 57 teeth material cast iron SKU: 13615700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-57-teeth-material-cast-iron-sku-13615700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 45 teeth material cast iron SKU: 13614500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-45-teeth-material-cast-iron-sku-13614500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 38 teeth material steel SKU: 13613800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-38-teeth-material-steel-sku-13613800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 30 teeth material steel SKU: 13613000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-30-teeth-material-steel-sku-13613000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 27 teeth material steel SKU: 13612700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-27-teeth-material-steel-sku-13612700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 25 teeth material steel SKU: 13612500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-25-teeth-material-steel-sku-13612500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 24 teeth material steel SKU: 13612400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-24-teeth-material-steel-sku-13612400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 23 teeth material steel SKU: 13612300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-23-teeth-material-steel-sku-13612300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 22 teeth material steel SKU: 13612200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-22-teeth-material-steel-sku-13612200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Spur gear made of steel C45 with hub module 1 50 teeth tooth width 6.5mm outside diameter 52mm SKU: 21305000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-50-teeth-tooth-width-6-5mm-outside-diameter-52mm-sku-21305000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of C45 with hub module 1 48 teeth tooth width 6.5mm outside diameter 50mm SKU: 21304800](https://maedler.in/product/spur-gear-made-of-c45-with-hub-module-1-48-teeth-tooth-width-6-5mm-outside-diameter-50mm-sku-21304800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 45 teeth tooth width 6.5mm outside diameter 47mm SKU: 21304500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-45-teeth-tooth-width-6-5mm-outside-diameter-47mm-sku-21304500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 42 teeth tooth width 6.5mm outside diameter 44mm SKU: 21304200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-42-teeth-tooth-width-6-5mm-outside-diameter-44mm-sku-21304200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 40 teeth tooth width 6.5mm outside diameter 42mm SKU: 21304000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-40-teeth-tooth-width-6-5mm-outside-diameter-42mm-sku-21304000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 36 teeth tooth width 6.5mm outside diameter 38mm SKU: 21303600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-36-teeth-tooth-width-6-5mm-outside-diameter-38mm-sku-21303600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 35 teeth tooth width 6.5mm outside diameter 37mm SKU: 21303500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-35-teeth-tooth-width-6-5mm-outside-diameter-37mm-sku-21303500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 32 teeth tooth width 6.5mm outside diameter 34mm SKU: 21303200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-32-teeth-tooth-width-6-5mm-outside-diameter-34mm-sku-21303200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 30 teeth tooth width 6.5mm outside diameter 32mm SKU: 21303000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-30-teeth-tooth-width-6-5mm-outside-diameter-32mm-sku-21303000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 28 teeth tooth width 6.5mm outside diameter 30mm SKU: 21302800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-28-teeth-tooth-width-6-5mm-outside-diameter-30mm-sku-21302800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 25 teeth tooth width 6.5mm outside diameter 27mm SKU: 21302500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-teeth-tooth-width-6-5mm-outside-diameter-27mm-sku-21302500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 24 teeth tooth width 6.5mm outside diameter 26mm SKU: 21302400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-24-teeth-tooth-width-6-5mm-outside-diameter-26mm-sku-21302400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 22 teeth tooth width 6.5mm outside diameter 24mm SKU: 21302200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-22-teeth-tooth-width-6-5mm-outside-diameter-24mm-sku-21302200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 20 teeth tooth width 6.5mm outside diameter 22mm SKU: 21302000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-20-teeth-tooth-width-6-5mm-outside-diameter-22mm-sku-21302000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 18 teeth tooth width 6.5mm outside diameter 20mm SKU: 21301800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-18-teeth-tooth-width-6-5mm-outside-diameter-20mm-sku-21301800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 17 teeth tooth width 6.5mm outside diameter 19mm SKU: 21301700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-17-teeth-tooth-width-6-5mm-outside-diameter-19mm-sku-21301700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 16 teeth tooth width 6.5mm outside diameter 18mm SKU: 21301600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-16-teeth-tooth-width-6-5mm-outside-diameter-18mm-sku-21301600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 15 teeth tooth width 6.5mm outside diameter 17mm SKU: 21301500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-15-teeth-tooth-width-6-5mm-outside-diameter-17mm-sku-21301500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 14 teeth tooth width 6.5mm outside diameter 16mm SKU: 21301400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-14-teeth-tooth-width-6-5mm-outside-diameter-16mm-sku-21301400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 12 teeth tooth width 6.5mm outside diameter 14mm SKU: 21301200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-12-teeth-tooth-width-6-5mm-outside-diameter-14mm-sku-21301200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 10 teeth tooth width 6.5mm outside diameter 12mm SKU: 21301000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-10-teeth-tooth-width-6-5mm-outside-diameter-12mm-sku-21301000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Triple-strand sprocket DRT 24 B-3 1 1/2" x 1" 76 teeth material cast iron for taper bush type 4545 SKU: 13977576G](https://maedler.in/product/triple-strand-sprocket-drt-24-b-3-1-1-2-x-1-76-teeth-material-cast-iron-for-taper-bush-type-4545-sku-13977576g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 24,1 mm, B3 = 120,3 mm, c = 4 mm, r3 = 38 mm.Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 24 B-3 1 1/2" x 1" 57 teeth material cast iron for taper bush type 4040 SKU: 13977557G](https://maedler.in/product/triple-strand-sprocket-drt-24-b-3-1-1-2-x-1-57-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977557g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 24,1 mm, B3 = 120,3 mm, c = 4 mm, r3 = 38 mm.Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 24 B-3 1 1/2" x 1" 45 teeth material cast iron for taper bush type 4040 SKU: 13977545G](https://maedler.in/product/triple-strand-sprocket-drt-24-b-3-1-1-2-x-1-45-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977545g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 24,1 mm, B3 = 120,3 mm, c = 4 mm, r3 = 38 mm.Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 24 B-3 1 1/2" x 1" 38 teeth material cast iron for taper bush type 4040 SKU: 13977538G](https://maedler.in/product/triple-strand-sprocket-drt-24-b-3-1-1-2-x-1-38-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977538g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 24,1 mm, B3 = 120,3 mm, c = 4 mm, r3 = 38 mm.Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 20 B-3 1 1/4" x 3/4" 76 teeth material cast iron for taper bush type 4040 SKU: 13977176G](https://maedler.in/product/triple-strand-sprocket-drt-20-b-3-1-1-4-x-3-4-76-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977176g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 18,5 mm, B3 = 91 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 20 B-3 1 1/4" x 3/4" 57 teeth material cast iron for taper bush type 4040 SKU: 13977157G](https://maedler.in/product/triple-strand-sprocket-drt-20-b-3-1-1-4-x-3-4-57-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977157g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 18,5 mm, B3 = 91 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 20 B-3 1 1/4" x 3/4" 38 teeth material cast iron for taper bush type 3535 SKU: 13977138G](https://maedler.in/product/triple-strand-sprocket-drt-20-b-3-1-1-4-x-3-4-38-teeth-material-cast-iron-for-taper-bush-type-3535-sku-13977138g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 18,5 mm, B3 = 91 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 114 teeth material cast iron for taper bush type 4545 SKU: 13877188G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-114-teeth-material-cast-iron-for-taper-bush-type-4545-sku-13877188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 95 teeth material cast iron for taper bush type 4040 SKU: 13877183G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-95-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13877183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 95 teeth material steel for taper bush type 4030 SKU: 13877183](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-95-teeth-material-steel-for-taper-bush-type-4030-sku-13877183/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 76 teeth material cast iron for taper bush type 4040 SKU: 13877176G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-76-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13877176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 57 teeth material cast iron for taper bush type 4040 SKU: 13877157G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-57-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13877157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 45 teeth material cast iron for taper bush type 4040 SKU: 13877145G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-45-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13877145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 38 teeth material cast iron for taper bush type 3535 SKU: 13877138G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-38-teeth-material-cast-iron-for-taper-bush-type-3535-sku-13877138g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 38 teeth material steel for taper bush type 3525 SKU: 13877138](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-38-teeth-material-steel-for-taper-bush-type-3525-sku-13877138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 30 teeth material steel for taper bush type 3525 SKU: 13877130](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-30-teeth-material-steel-for-taper-bush-type-3525-sku-13877130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 27 teeth material steel for taper bush type 3525 SKU: 13877127](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-27-teeth-material-steel-for-taper-bush-type-3525-sku-13877127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 25 teeth material steel for taper bush type 3525 SKU: 13877125](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-25-teeth-material-steel-for-taper-bush-type-3525-sku-13877125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 23 teeth material steel for taper bush type 3525 SKU: 13877123](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-23-teeth-material-steel-for-taper-bush-type-3525-sku-13877123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 21 teeth material steel for taper bush type 3030 SKU: 13877121](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-21-teeth-material-steel-for-taper-bush-type-3030-sku-13877121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 19 teeth material steel for taper bush type 3020 SKU: 13877119](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-19-teeth-material-steel-for-taper-bush-type-3020-sku-13877119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 17 teeth material steel for taper bush type 2517 SKU: 13877117](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-17-teeth-material-steel-for-taper-bush-type-2517-sku-13877117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 57 teeth material steel SKU: 13825700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-57-teeth-material-steel-sku-13825700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 48 teeth material steel SKU: 13824800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-48-teeth-material-steel-sku-13824800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 45 teeth material steel SKU: 13824500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-45-teeth-material-steel-sku-13824500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 38 teeth material steel SKU: 13823800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-38-teeth-material-steel-sku-13823800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 35 teeth material steel SKU: 13823500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-35-teeth-material-steel-sku-13823500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 30 teeth material steel SKU: 13823000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-30-teeth-material-steel-sku-13823000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 27 teeth material steel SKU: 13822700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-27-teeth-material-steel-sku-13822700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 24 teeth material steel SKU: 13822400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-24-teeth-material-steel-sku-13822400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 22 teeth material steel SKU: 13822200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-22-teeth-material-steel-sku-13822200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 20 teeth material steel SKU: 13822000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-20-teeth-material-steel-sku-13822000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 18 teeth material steel SKU: 13821800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-18-teeth-material-steel-sku-13821800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 16 teeth material steel SKU: 13821600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-16-teeth-material-steel-sku-13821600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 14 teeth material steel SKU: 13821400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-14-teeth-material-steel-sku-13821400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 12 teeth material steel SKU: 13821200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-12-teeth-material-steel-sku-13821200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 10 teeth material steel SKU: 13821000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-10-teeth-material-steel-sku-13821000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 8 teeth material steel SKU: 13820800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-8-teeth-material-steel-sku-13820800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 114 teeth material cast iron SKU: 13818800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-114-teeth-material-cast-iron-sku-13818800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 95 teeth material cast iron SKU: 13818300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-95-teeth-material-cast-iron-sku-13818300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 76 teeth material cast iron SKU: 13817600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-76-teeth-material-cast-iron-sku-13817600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 57 teeth material cast iron SKU: 13815700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-57-teeth-material-cast-iron-sku-13815700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 45 teeth material cast iron SKU: 13814500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-45-teeth-material-cast-iron-sku-13814500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 38 teeth material cast iron SKU: 13813800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-38-teeth-material-cast-iron-sku-13813800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 36 teeth material steel SKU: 13813600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-36-teeth-material-steel-sku-13813600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 35 teeth material steel SKU: 13813500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-35-teeth-material-steel-sku-13813500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 32 teeth material steel SKU: 13813200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-32-teeth-material-steel-sku-13813200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 31 teeth material steel SKU: 13813100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-31-teeth-material-steel-sku-13813100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 30 teeth material steel SKU: 13813000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-30-teeth-material-steel-sku-13813000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 29 teeth material steel SKU: 13812900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-29-teeth-material-steel-sku-13812900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 28 teeth material steel SKU: 13812800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-28-teeth-material-steel-sku-13812800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 27 teeth material steel SKU: 13812700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-27-teeth-material-steel-sku-13812700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 26 teeth material steel SKU: 13812600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-26-teeth-material-steel-sku-13812600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 25 teeth material steel SKU: 13812500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-25-teeth-material-steel-sku-13812500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 24 teeth material steel SKU: 13812400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-24-teeth-material-steel-sku-13812400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 23 teeth material steel SKU: 13812300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-23-teeth-material-steel-sku-13812300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 22 teeth material steel SKU: 13812200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-22-teeth-material-steel-sku-13812200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 21 teeth material steel SKU: 13812100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-21-teeth-material-steel-sku-13812100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 20 teeth material steel SKU: 13812000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-20-teeth-material-steel-sku-13812000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 19 teeth material steel SKU: 13811900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-19-teeth-material-steel-sku-13811900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 18 teeth material steel SKU: 13811800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-18-teeth-material-steel-sku-13811800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 17 teeth material steel SKU: 13811700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-17-teeth-material-steel-sku-13811700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 16 teeth material steel SKU: 13811600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-16-teeth-material-steel-sku-13811600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 15 teeth material steel SKU: 13811500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-15-teeth-material-steel-sku-13811500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 14 teeth material steel SKU: 13811400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-14-teeth-material-steel-sku-13811400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 13 teeth material steel SKU: 13811300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-13-teeth-material-steel-sku-13811300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 12 teeth material steel SKU: 13811200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-12-teeth-material-steel-sku-13811200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 11 teeth material steel SKU: 13811100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-11-teeth-material-steel-sku-13811100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 10 teeth material steel SKU: 13811000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-10-teeth-material-steel-sku-13811000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 9 teeth material steel SKU: 13810900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-9-teeth-material-steel-sku-13810900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 8 teeth material steel SKU: 13810800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-8-teeth-material-steel-sku-13810800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 114 teeth material cast iron for taper bush type 3030 SKU: 13777188G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-114-teeth-material-cast-iron-for-taper-bush-type-3030-sku-13777188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 95 teeth material cast iron for taper bush type 3030 SKU: 13777183G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-3030-sku-13777183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 76 teeth material cast iron for taper bush type 3020 SKU: 13777176G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-13777176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 57 teeth material cast iron for taper bush type 3020 SKU: 13777157G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-57-teeth-material-cast-iron-for-taper-bush-type-3020-sku-13777157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 45 teeth material cast iron for taper bush type 3020 SKU: 13777145G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-45-teeth-material-cast-iron-for-taper-bush-type-3020-sku-13777145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 45 teeth material steel for taper bush type 3020 SKU: 13777145](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-45-teeth-material-steel-for-taper-bush-type-3020-sku-13777145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 38 teeth material steel for taper bush type 3020 SKU: 13777138](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-38-teeth-material-steel-for-taper-bush-type-3020-sku-13777138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 30 teeth material steel for taper bush type 3020 SKU: 13777130](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-30-teeth-material-steel-for-taper-bush-type-3020-sku-13777130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Spur gear made of steel C45 with hub module 1 31 teeth tooth width 15mm outside diameter 33mm SKU: 21411031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-31-teeth-tooth-width-15mm-outside-diameter-33mm-sku-21411031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 30 teeth tooth width 15mm outside diameter 32mm SKU: 21411030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-30-teeth-tooth-width-15mm-outside-diameter-32mm-sku-21411030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 29 teeth tooth width 15mm outside diameter 31mm SKU: 21411029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-29-teeth-tooth-width-15mm-outside-diameter-31mm-sku-21411029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 28 teeth tooth width 15mm outside diameter 30mm SKU: 21411028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-28-teeth-tooth-width-15mm-outside-diameter-30mm-sku-21411028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 27 teeth tooth width 15mm outside diameter 29mm SKU: 21411027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-27-teeth-tooth-width-15mm-outside-diameter-29mm-sku-21411027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 26 teeth tooth width 15mm outside diameter 28mm SKU: 21411026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-26-teeth-tooth-width-15mm-outside-diameter-28mm-sku-21411026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 25 teeth tooth width 15mm outside diameter 27mm SKU: 21411025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-teeth-tooth-width-15mm-outside-diameter-27mm-sku-21411025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 24 teeth tooth width 15mm outside diameter 26mm SKU: 21411024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-24-teeth-tooth-width-15mm-outside-diameter-26mm-sku-21411024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 23 teeth tooth width 15mm outside diameter 25mm SKU: 21411023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-23-teeth-tooth-width-15mm-outside-diameter-25mm-sku-21411023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 22 teeth tooth width 15mm outside diameter 24mm SKU: 21411022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-22-teeth-tooth-width-15mm-outside-diameter-24mm-sku-21411022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 21 teeth tooth width 15mm outside diameter 23mm SKU: 21411021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-21-teeth-tooth-width-15mm-outside-diameter-23mm-sku-21411021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 20 teeth tooth width 15mm outside diameter 22mm SKU: 21411020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-20-teeth-tooth-width-15mm-outside-diameter-22mm-sku-21411020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 19 teeth tooth width 15mm outside diameter 21mm SKU: 21411019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-19-teeth-tooth-width-15mm-outside-diameter-21mm-sku-21411019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 18 teeth tooth width 15mm outside diameter 20mm SKU: 21411018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-18-teeth-tooth-width-15mm-outside-diameter-20mm-sku-21411018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 17 teeth tooth width 15mm outside diameter 19mm SKU: 21411017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-17-teeth-tooth-width-15mm-outside-diameter-19mm-sku-21411017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 16 teeth tooth width 15mm outside diameter 18mm SKU: 21411016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-16-teeth-tooth-width-15mm-outside-diameter-18mm-sku-21411016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 15 teeth tooth width 15mm outside diameter 17mm SKU: 21411015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-15-teeth-tooth-width-15mm-outside-diameter-17mm-sku-21411015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 14 teeth tooth width 15mm outside diameter 16mm SKU: 21411014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-14-teeth-tooth-width-15mm-outside-diameter-16mm-sku-21411014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 13 teeth tooth width 15mm outside diameter 15mm SKU: 21411013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-13-teeth-tooth-width-15mm-outside-diameter-15mm-sku-21411013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 12 teeth tooth width 15mm outside diameter 14mm SKU: 21411012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-12-teeth-tooth-width-15mm-outside-diameter-14mm-sku-21411012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 11 teeth tooth width 15mm outside diameter 13mm SKU: 21411011](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-11-teeth-tooth-width-15mm-outside-diameter-13mm-sku-21411011/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 110 teeth tooth width 10mm outside diameter 112mm SKU: 21411000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-110-teeth-tooth-width-10mm-outside-diameter-112mm-sku-21411000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 100 teeth tooth width 10mm outside diameter 102mm SKU: 21410000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-100-teeth-tooth-width-10mm-outside-diameter-102mm-sku-21410000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 95 teeth tooth width 10mm outside diameter 97mm SKU: 21409500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-95-teeth-tooth-width-10mm-outside-diameter-97mm-sku-21409500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 90 teeth tooth width 10mm outside diameter 92mm SKU: 21409000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-90-teeth-tooth-width-10mm-outside-diameter-92mm-sku-21409000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 87 teeth tooth width 10mm outside diameter 89mm SKU: 21408700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-87-teeth-tooth-width-10mm-outside-diameter-89mm-sku-21408700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 85 teeth tooth width 10mm outside diameter 87mm SKU: 21408500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-85-teeth-tooth-width-10mm-outside-diameter-87mm-sku-21408500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 83 teeth tooth width 10mm outside diameter 85mm SKU: 21408300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-83-teeth-tooth-width-10mm-outside-diameter-85mm-sku-21408300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 82 teeth tooth width 10mm outside diameter 84mm SKU: 21408200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-82-teeth-tooth-width-10mm-outside-diameter-84mm-sku-21408200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 80 teeth tooth width 10mm outside diameter 82mm SKU: 21408000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-80-teeth-tooth-width-10mm-outside-diameter-82mm-sku-21408000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 78 teeth tooth width 10mm outside diameter 80mm SKU: 21407800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-78-teeth-tooth-width-10mm-outside-diameter-80mm-sku-21407800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 76 teeth tooth width 10mm outside diameter 78mm SKU: 21407600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-76-teeth-tooth-width-10mm-outside-diameter-78mm-sku-21407600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 75 teeth tooth width 10mm outside diameter 77mm SKU: 21407500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-75-teeth-tooth-width-10mm-outside-diameter-77mm-sku-21407500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 74 teeth tooth width 10mm outside diameter 76mm SKU: 21407400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-74-teeth-tooth-width-10mm-outside-diameter-76mm-sku-21407400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 72 teeth tooth width 10mm outside diameter 74mm SKU: 21407200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-72-teeth-tooth-width-10mm-outside-diameter-74mm-sku-21407200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 70 teeth tooth width 10mm outside diameter 72mm SKU: 21407000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-70-teeth-tooth-width-10mm-outside-diameter-72mm-sku-21407000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 68 teeth tooth width 10mm outside diameter 70mm SKU: 21406800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-68-teeth-tooth-width-10mm-outside-diameter-70mm-sku-21406800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 65 teeth tooth width 10mm outside diameter 67mm SKU: 21406500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-65-teeth-tooth-width-10mm-outside-diameter-67mm-sku-21406500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 64 teeth tooth width 10mm outside diameter 66mm SKU: 21406400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-64-teeth-tooth-width-10mm-outside-diameter-66mm-sku-21406400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 62 teeth tooth width 10mm outside diameter 64mm SKU: 21406200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-62-teeth-tooth-width-10mm-outside-diameter-64mm-sku-21406200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 60 teeth tooth width 10mm outside diameter 62mm SKU: 21406000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-60-teeth-tooth-width-10mm-outside-diameter-62mm-sku-21406000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 58 teeth tooth width 10mm outside diameter 60mm SKU: 21405800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-58-teeth-tooth-width-10mm-outside-diameter-60mm-sku-21405800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 57 teeth tooth width 10mm outside diameter 59mm SKU: 21405700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-57-teeth-tooth-width-10mm-outside-diameter-59mm-sku-21405700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 56 teeth tooth width 10mm outside diameter 58mm SKU: 21405600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-56-teeth-tooth-width-10mm-outside-diameter-58mm-sku-21405600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 55 teeth tooth width 10mm outside diameter 57mm SKU: 21405500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-55-teeth-tooth-width-10mm-outside-diameter-57mm-sku-21405500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 54 teeth tooth width 10mm outside diameter 56mm SKU: 21405400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-54-teeth-tooth-width-10mm-outside-diameter-56mm-sku-21405400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 53 teeth tooth width 10mm outside diameter 55mm SKU: 21405300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-53-teeth-tooth-width-10mm-outside-diameter-55mm-sku-21405300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 52 teeth tooth width 10mm outside diameter 54mm SKU: 21405200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-52-teeth-tooth-width-10mm-outside-diameter-54mm-sku-21405200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 50 teeth tooth width 10mm outside diameter 52mm SKU: 21405000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-50-teeth-tooth-width-10mm-outside-diameter-52mm-sku-21405000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 49 teeth tooth width 10mm outside diameter 51mm SKU: 21404900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-49-teeth-tooth-width-10mm-outside-diameter-51mm-sku-21404900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 48 teeth tooth width 10mm outside diameter 50mm SKU: 21404800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-48-teeth-tooth-width-10mm-outside-diameter-50mm-sku-21404800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 47 teeth tooth width 10mm outside diameter 49mm SKU: 21404700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-47-teeth-tooth-width-10mm-outside-diameter-49mm-sku-21404700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 46 teeth tooth width 10mm outside diameter 48mm SKU: 21404600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-46-teeth-tooth-width-10mm-outside-diameter-48mm-sku-21404600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 45 teeth tooth width 10mm outside diameter 47mm SKU: 21404500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-45-teeth-tooth-width-10mm-outside-diameter-47mm-sku-21404500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 44 teeth tooth width 10mm outside diameter 46mm SKU: 21404400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-44-teeth-tooth-width-10mm-outside-diameter-46mm-sku-21404400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 43 teeth tooth width 10mm outside diameter 45mm SKU: 21404300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-43-teeth-tooth-width-10mm-outside-diameter-45mm-sku-21404300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 42 teeth tooth width 10mm outside diameter 44mm SKU: 21404200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-42-teeth-tooth-width-10mm-outside-diameter-44mm-sku-21404200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 41 teeth tooth width 10mm outside diameter 43mm SKU: 21404100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-41-teeth-tooth-width-10mm-outside-diameter-43mm-sku-21404100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 40 teeth tooth width 10mm outside diameter 42mm SKU: 21404000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-40-teeth-tooth-width-10mm-outside-diameter-42mm-sku-21404000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 39 teeth tooth width 10mm outside diameter 41mm SKU: 21403900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-39-teeth-tooth-width-10mm-outside-diameter-41mm-sku-21403900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 38 teeth tooth width 10mm outside diameter 40mm SKU: 21403800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-38-teeth-tooth-width-10mm-outside-diameter-40mm-sku-21403800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 37 teeth tooth width 10mm outside diameter 39mm SKU: 21403700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-37-teeth-tooth-width-10mm-outside-diameter-39mm-sku-21403700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 36 teeth tooth width 10mm outside diameter 38mm SKU: 21403600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-36-teeth-tooth-width-10mm-outside-diameter-38mm-sku-21403600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 35 teeth tooth width 10mm outside diameter 37mm SKU: 21403500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-35-teeth-tooth-width-10mm-outside-diameter-37mm-sku-21403500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 34 teeth tooth width 10mm outside diameter 36mm SKU: 21403400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-34-teeth-tooth-width-10mm-outside-diameter-36mm-sku-21403400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 33 teeth tooth width 10mm outside diameter 35mm SKU: 21403300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-33-teeth-tooth-width-10mm-outside-diameter-35mm-sku-21403300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 32 teeth tooth width 10mm outside diameter 34mm SKU: 21403200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-32-teeth-tooth-width-10mm-outside-diameter-34mm-sku-21403200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 31 teeth tooth width 10mm outside diameter 33mm SKU: 21403100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-31-teeth-tooth-width-10mm-outside-diameter-33mm-sku-21403100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 30 teeth tooth width 10mm outside diameter 32mm SKU: 21403000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-30-teeth-tooth-width-10mm-outside-diameter-32mm-sku-21403000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 29 teeth tooth width 10mm outside diameter 31mm SKU: 21402900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-29-teeth-tooth-width-10mm-outside-diameter-31mm-sku-21402900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 28 teeth tooth width 10mm outside diameter 30mm SKU: 21402800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-28-teeth-tooth-width-10mm-outside-diameter-30mm-sku-21402800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 27 teeth tooth width 10mm outside diameter 29mm SKU: 21402700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-27-teeth-tooth-width-10mm-outside-diameter-29mm-sku-21402700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 26 teeth tooth width 10mm outside diameter 28mm SKU: 21402600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-26-teeth-tooth-width-10mm-outside-diameter-28mm-sku-21402600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 25 teeth tooth width 10mm outside diameter 27mm SKU: 21402500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-teeth-tooth-width-10mm-outside-diameter-27mm-sku-21402500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 24 teeth tooth width 10mm outside diameter 26mm SKU: 21402400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-24-teeth-tooth-width-10mm-outside-diameter-26mm-sku-21402400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 23 teeth tooth width 10mm outside diameter 25mm SKU: 21402300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-23-teeth-tooth-width-10mm-outside-diameter-25mm-sku-21402300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 22 teeth tooth width 10mm outside diameter 24mm SKU: 21402200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-22-teeth-tooth-width-10mm-outside-diameter-24mm-sku-21402200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 21 teeth tooth width 10mm outside diameter 23mm SKU: 21402100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-21-teeth-tooth-width-10mm-outside-diameter-23mm-sku-21402100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 20 teeth tooth width 10mm outside diameter 22mm SKU: 21402000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-20-teeth-tooth-width-10mm-outside-diameter-22mm-sku-21402000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 19 teeth tooth width 10mm outside diameter 21mm SKU: 21401900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-19-teeth-tooth-width-10mm-outside-diameter-21mm-sku-21401900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 18 teeth tooth width 10mm outside diameter 20mm SKU: 21401800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-18-teeth-tooth-width-10mm-outside-diameter-20mm-sku-21401800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 17 teeth tooth width 10mm outside diameter 19mm SKU: 21401700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-17-teeth-tooth-width-10mm-outside-diameter-19mm-sku-21401700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 16 teeth tooth width 10mm outside diameter 18mm SKU: 21401600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-16-teeth-tooth-width-10mm-outside-diameter-18mm-sku-21401600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 15 teeth tooth width 10mm outside diameter 17mm SKU: 21401500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-15-teeth-tooth-width-10mm-outside-diameter-17mm-sku-21401500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 14 teeth tooth width 10mm outside diameter 16mm SKU: 21401400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-14-teeth-tooth-width-10mm-outside-diameter-16mm-sku-21401400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 13 teeth tooth width 10mm outside diameter 15mm SKU: 21401300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-13-teeth-tooth-width-10mm-outside-diameter-15mm-sku-21401300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 12 teeth tooth width 10mm outside diameter 14mm SKU: 21401200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-12-teeth-tooth-width-10mm-outside-diameter-14mm-sku-21401200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 11 teeth tooth width 10mm outside diameter 13mm SKU: 21401100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-11-teeth-tooth-width-10mm-outside-diameter-13mm-sku-21401100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 10 teeth tooth width 10mm outside diameter 12mm SKU: 21401000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-10-teeth-tooth-width-10mm-outside-diameter-12mm-sku-21401000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 120 teeth tooth width 6.5mm outside diameter 122mm SKU: 21312000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-120-teeth-tooth-width-6-5mm-outside-diameter-122mm-sku-21312000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 100 teeth tooth width 6.5mm outside diameter 102mm SKU: 21310000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-100-teeth-tooth-width-6-5mm-outside-diameter-102mm-sku-21310000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 90 teeth tooth width 6.5mm outside diameter 92mm SKU: 21309000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-90-teeth-tooth-width-6-5mm-outside-diameter-92mm-sku-21309000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 80 teeth tooth width 6.5mm outside diameter 82mm SKU: 21308000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-80-teeth-tooth-width-6-5mm-outside-diameter-82mm-sku-21308000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 75 teeth tooth width 6.5mm outside diameter 77mm SKU: 21307500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-75-teeth-tooth-width-6-5mm-outside-diameter-77mm-sku-21307500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 72 teeth tooth width 6.5mm outside diameter 74mm SKU: 21307200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-72-teeth-tooth-width-6-5mm-outside-diameter-74mm-sku-21307200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 70 teeth tooth width 6.5mm outside diameter 72mm SKU: 21307000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-70-teeth-tooth-width-6-5mm-outside-diameter-72mm-sku-21307000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 65 teeth tooth width 6.5mm outside diameter 67mm SKU: 21306500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-65-teeth-tooth-width-6-5mm-outside-diameter-67mm-sku-21306500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 64 teeth tooth width 6.5mm outside diameter 66mm SKU: 21306400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-64-teeth-tooth-width-6-5mm-outside-diameter-66mm-sku-21306400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 60 teeth tooth width 6.5mm outside diameter 62mm SKU: 21306000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-60-teeth-tooth-width-6-5mm-outside-diameter-62mm-sku-21306000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 54 teeth tooth width 6.5mm outside diameter 56mm SKU: 21305400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-54-teeth-tooth-width-6-5mm-outside-diameter-56mm-sku-21305400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 32 teeth tooth width 10mm outside diameter 51mm SKU: 21703200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-32-teeth-tooth-width-10mm-outside-diameter-51mm-sku-21703200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 30 teeth tooth width 10mm outside diameter 48mm SKU: 21703000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-30-teeth-tooth-width-10mm-outside-diameter-48mm-sku-21703000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 28 teeth tooth width 10mm outside diameter 45mm SKU: 21702800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-28-teeth-tooth-width-10mm-outside-diameter-45mm-sku-21702800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 25 teeth tooth width 10mm outside diameter 40.5mm SKU: 21702500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-25-teeth-tooth-width-10mm-outside-diameter-40-5mm-sku-21702500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 24 teeth tooth width 10mm outside diameter 39mm SKU: 21702400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-24-teeth-tooth-width-10mm-outside-diameter-39mm-sku-21702400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 20 teeth tooth width 10mm outside diameter 33mm SKU: 21702000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-20-teeth-tooth-width-10mm-outside-diameter-33mm-sku-21702000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 18 teeth tooth width 10mm outside diameter 30mm SKU: 21701800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-18-teeth-tooth-width-10mm-outside-diameter-30mm-sku-21701800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 15 teeth tooth width 10mm outside diameter 25.5mm SKU: 21701500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-15-teeth-tooth-width-10mm-outside-diameter-25-5mm-sku-21701500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 12 teeth tooth width 10mm outside diameter 21mm SKU: 21701200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-12-teeth-tooth-width-10mm-outside-diameter-21mm-sku-21701200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 120 teeth tooth width 10mm outside diameter 152.5mm SKU: 21612000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-120-teeth-tooth-width-10mm-outside-diameter-152-5mm-sku-21612000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 100 teeth tooth width 10mm outside diameter 127.5mm SKU: 21610000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-100-teeth-tooth-width-10mm-outside-diameter-127-5mm-sku-21610000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 90 teeth tooth width 10mm outside diameter 115mm SKU: 21609000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-90-teeth-tooth-width-10mm-outside-diameter-115mm-sku-21609000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 85 teeth tooth width 10mm outside diameter 108.75mm SKU: 21608500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-85-teeth-tooth-width-10mm-outside-diameter-108-75mm-sku-21608500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 80 teeth tooth width 10mm outside diameter 102.5mm SKU: 21608000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-80-teeth-tooth-width-10mm-outside-diameter-102-5mm-sku-21608000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 76 teeth tooth width 10mm outside diameter 97.5mm SKU: 21607600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-76-teeth-tooth-width-10mm-outside-diameter-97-5mm-sku-21607600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 75 teeth tooth width 10mm outside diameter 96.25mm SKU: 21607500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-75-teeth-tooth-width-10mm-outside-diameter-96-25mm-sku-21607500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 72 teeth tooth width 10mm outside diameter 92.5mm SKU: 21607200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-72-teeth-tooth-width-10mm-outside-diameter-92-5mm-sku-21607200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 70 teeth tooth width 10mm outside diameter 90mm SKU: 21607000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-70-teeth-tooth-width-10mm-outside-diameter-90mm-sku-21607000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 65 teeth tooth width 10mm outside diameter 83.75mm SKU: 21606500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-65-teeth-tooth-width-10mm-outside-diameter-83-75mm-sku-21606500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 64 teeth tooth width 10mm outside diameter 82.5mm SKU: 21606400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-64-teeth-tooth-width-10mm-outside-diameter-82-5mm-sku-21606400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 60 teeth tooth width 10mm outside diameter 77.5mm SKU: 21606000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-60-teeth-tooth-width-10mm-outside-diameter-77-5mm-sku-21606000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 57 teeth tooth width 10mm outside diameter 73.75mm SKU: 21605700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-57-teeth-tooth-width-10mm-outside-diameter-73-75mm-sku-21605700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 56 teeth tooth width 10mm outside diameter 72.5mm SKU: 21605600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-56-teeth-tooth-width-10mm-outside-diameter-72-5mm-sku-21605600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 55 teeth tooth width 10mm outside diameter 71.25mm SKU: 21605500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-55-teeth-tooth-width-10mm-outside-diameter-71-25mm-sku-21605500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 54 teeth tooth width 10mm outside diameter 70mm SKU: 21605400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-54-teeth-tooth-width-10mm-outside-diameter-70mm-sku-21605400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 52 teeth tooth width 10mm outside diameter 67.5mm SKU: 21605200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-52-teeth-tooth-width-10mm-outside-diameter-67-5mm-sku-21605200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 50 teeth tooth width 10mm outside diameter 65mm SKU: 21605000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-50-teeth-tooth-width-10mm-outside-diameter-65mm-sku-21605000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 48 teeth tooth width 10mm outside diameter 62.5mm SKU: 21604800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-48-teeth-tooth-width-10mm-outside-diameter-62-5mm-sku-21604800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 45 teeth tooth width 10mm outside diameter 58.75mm SKU: 21604500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-45-teeth-tooth-width-10mm-outside-diameter-58-75mm-sku-21604500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 42 teeth tooth width 10mm outside diameter 55mm SKU: 21604200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-42-teeth-tooth-width-10mm-outside-diameter-55mm-sku-21604200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 40 teeth tooth width 10mm outside diameter 52.5mm SKU: 21604000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-40-teeth-tooth-width-10mm-outside-diameter-52-5mm-sku-21604000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 38 teeth tooth width 10mm outside diameter 50mm SKU: 21603800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-38-teeth-tooth-width-10mm-outside-diameter-50mm-sku-21603800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 37 teeth tooth width 10mm outside diameter 48.75mm SKU: 21603700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-37-teeth-tooth-width-10mm-outside-diameter-48-75mm-sku-21603700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 36 teeth tooth width 10mm outside diameter 47.5mm SKU: 21603600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-36-teeth-tooth-width-10mm-outside-diameter-47-5mm-sku-21603600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 35 teeth tooth width 10mm outside diameter 46.25mm SKU: 21603500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-35-teeth-tooth-width-10mm-outside-diameter-46-25mm-sku-21603500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 32 teeth tooth width 10mm outside diameter 42.5mm SKU: 21603200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-32-teeth-tooth-width-10mm-outside-diameter-42-5mm-sku-21603200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 30 teeth tooth width 10mm outside diameter 40mm SKU: 21603000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-30-teeth-tooth-width-10mm-outside-diameter-40mm-sku-21603000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 28 teeth tooth width 10mm outside diameter 37.5mm SKU: 21602800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-28-teeth-tooth-width-10mm-outside-diameter-37-5mm-sku-21602800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 27 teeth tooth width 10mm outside diameter 36.25mm SKU: 21602700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-27-teeth-tooth-width-10mm-outside-diameter-36-25mm-sku-21602700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 26 teeth tooth width 10mm outside diameter 35mm SKU: 21602600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-26-teeth-tooth-width-10mm-outside-diameter-35mm-sku-21602600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 25 teeth tooth width 10mm outside diameter 33.75mm SKU: 21602500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-25-teeth-tooth-width-10mm-outside-diameter-33-75mm-sku-21602500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 24 teeth tooth width 10mm outside diameter 32.5mm SKU: 21602400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-24-teeth-tooth-width-10mm-outside-diameter-32-5mm-sku-21602400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 23 teeth tooth width 10mm outside diameter 31.25mm SKU: 21602300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-23-teeth-tooth-width-10mm-outside-diameter-31-25mm-sku-21602300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 22 teeth tooth width 10mm outside diameter 30mm SKU: 21602200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-22-teeth-tooth-width-10mm-outside-diameter-30mm-sku-21602200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 21 teeth tooth width 10mm outside diameter 28.75mm SKU: 21602100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-21-teeth-tooth-width-10mm-outside-diameter-28-75mm-sku-21602100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 20 teeth tooth width 10mm outside diameter 27.5mm SKU: 21602000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-20-teeth-tooth-width-10mm-outside-diameter-27-5mm-sku-21602000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 19 teeth tooth width 10mm outside diameter 26.25mm SKU: 21601900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-19-teeth-tooth-width-10mm-outside-diameter-26-25mm-sku-21601900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 18 teeth tooth width 10mm outside diameter 25mm SKU: 21601800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-18-teeth-tooth-width-10mm-outside-diameter-25mm-sku-21601800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 17 teeth tooth width 10mm outside diameter 23.75mm SKU: 21601700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-17-teeth-tooth-width-10mm-outside-diameter-23-75mm-sku-21601700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 16 teeth tooth width 10mm outside diameter 22.5mm SKU: 21601600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-16-teeth-tooth-width-10mm-outside-diameter-22-5mm-sku-21601600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 15 teeth tooth width 10mm outside diameter 21.25mm SKU: 21601500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-15-teeth-tooth-width-10mm-outside-diameter-21-25mm-sku-21601500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 14 teeth tooth width 10mm outside diameter 20mm SKU: 21601400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-14-teeth-tooth-width-10mm-outside-diameter-20mm-sku-21601400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 13 teeth tooth width 10mm outside diameter 18.75mm SKU: 21601300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-13-teeth-tooth-width-10mm-outside-diameter-18-75mm-sku-21601300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 12 teeth tooth width 10mm outside diameter 17.5mm SKU: 21601200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-12-teeth-tooth-width-10mm-outside-diameter-17-5mm-sku-21601200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 120 teeth tooth width 10mm outside diameter 122mm SKU: 21412000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-120-teeth-tooth-width-10mm-outside-diameter-122mm-sku-21412000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 114 teeth tooth width 10mm outside diameter 116mm SKU: 21411400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-114-teeth-tooth-width-10mm-outside-diameter-116mm-sku-21411400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 120 teeth tooth width 15mm outside diameter 122mm SKU: 21411120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-120-teeth-tooth-width-15mm-outside-diameter-122mm-sku-21411120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 100 teeth tooth width 15mm outside diameter 102mm SKU: 21411100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-100-teeth-tooth-width-15mm-outside-diameter-102mm-sku-21411100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 90 teeth tooth width 15mm outside diameter 92mm SKU: 21411090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-90-teeth-tooth-width-15mm-outside-diameter-92mm-sku-21411090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 80 teeth tooth width 15mm outside diameter 82mm SKU: 21411080](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-80-teeth-tooth-width-15mm-outside-diameter-82mm-sku-21411080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 75 teeth tooth width 15mm outside diameter 77mm SKU: 21411075](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-75-teeth-tooth-width-15mm-outside-diameter-77mm-sku-21411075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 70 teeth tooth width 15mm outside diameter 72mm SKU: 21411070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-70-teeth-tooth-width-15mm-outside-diameter-72mm-sku-21411070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 69 teeth tooth width 15mm outside diameter 71mm SKU: 21411069](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-69-teeth-tooth-width-15mm-outside-diameter-71mm-sku-21411069/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 68 teeth tooth width 15mm outside diameter 70mm SKU: 21411068](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-68-teeth-tooth-width-15mm-outside-diameter-70mm-sku-21411068/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 67 teeth tooth width 15mm outside diameter 69mm SKU: 21411067](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-67-teeth-tooth-width-15mm-outside-diameter-69mm-sku-21411067/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 66 teeth tooth width 15mm outside diameter 68mm SKU: 21411066](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-66-teeth-tooth-width-15mm-outside-diameter-68mm-sku-21411066/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 65 teeth tooth width 15mm outside diameter 67mm SKU: 21411065](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-65-teeth-tooth-width-15mm-outside-diameter-67mm-sku-21411065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 64 teeth tooth width 15mm outside diameter 66mm SKU: 21411064](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-64-teeth-tooth-width-15mm-outside-diameter-66mm-sku-21411064/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 63 teeth tooth width 15mm outside diameter 65mm SKU: 21411063](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-63-teeth-tooth-width-15mm-outside-diameter-65mm-sku-21411063/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 62 teeth tooth width 15mm outside diameter 64mm SKU: 21411062](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-62-teeth-tooth-width-15mm-outside-diameter-64mm-sku-21411062/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 61 teeth tooth width 15mm outside diameter 63mm SKU: 21411061](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-61-teeth-tooth-width-15mm-outside-diameter-63mm-sku-21411061/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 60 teeth tooth width 15mm outside diameter 62mm SKU: 21411060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-60-teeth-tooth-width-15mm-outside-diameter-62mm-sku-21411060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 59 teeth tooth width 15mm outside diameter 61mm SKU: 21411059](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-teeth-tooth-width-15mm-outside-diameter-61mm-sku-21411059/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 58 teeth tooth width 15mm outside diameter 60mm SKU: 21411058](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-58-teeth-tooth-width-15mm-outside-diameter-60mm-sku-21411058/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 57 teeth tooth width 15mm outside diameter 59mm SKU: 21411057](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-57-teeth-tooth-width-15mm-outside-diameter-59mm-sku-21411057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 56 teeth tooth width 15mm outside diameter 58mm SKU: 21411056](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-56-teeth-tooth-width-15mm-outside-diameter-58mm-sku-21411056/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 55 teeth tooth width 15mm outside diameter 57mm SKU: 21411055](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-55-teeth-tooth-width-15mm-outside-diameter-57mm-sku-21411055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 54 teeth tooth width 15mm outside diameter 56mm SKU: 21411054](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-54-teeth-tooth-width-15mm-outside-diameter-56mm-sku-21411054/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 53 teeth tooth width 15mm outside diameter 55mm SKU: 21411053](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-53-teeth-tooth-width-15mm-outside-diameter-55mm-sku-21411053/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 52 teeth tooth width 15mm outside diameter 54mm SKU: 21411052](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-52-teeth-tooth-width-15mm-outside-diameter-54mm-sku-21411052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 51 teeth tooth width 15mm outside diameter 53mm SKU: 21411051](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-51-teeth-tooth-width-15mm-outside-diameter-53mm-sku-21411051/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 50 teeth tooth width 15mm outside diameter 52mm SKU: 21411050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-50-teeth-tooth-width-15mm-outside-diameter-52mm-sku-21411050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 49 teeth tooth width 15mm outside diameter 51mm SKU: 21411049](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-49-teeth-tooth-width-15mm-outside-diameter-51mm-sku-21411049/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 48 teeth tooth width 15mm outside diameter 50mm SKU: 21411048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-48-teeth-tooth-width-15mm-outside-diameter-50mm-sku-21411048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 47 teeth tooth width 15mm outside diameter 49mm SKU: 21411047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-47-teeth-tooth-width-15mm-outside-diameter-49mm-sku-21411047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 46 teeth tooth width 15mm outside diameter 48mm SKU: 21411046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-46-teeth-tooth-width-15mm-outside-diameter-48mm-sku-21411046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 45 teeth tooth width 15mm outside diameter 47mm SKU: 21411045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-45-teeth-tooth-width-15mm-outside-diameter-47mm-sku-21411045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 44 teeth tooth width 15mm outside diameter 46mm SKU: 21411044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-44-teeth-tooth-width-15mm-outside-diameter-46mm-sku-21411044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 43 teeth tooth width 15mm outside diameter 45mm SKU: 21411043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-43-teeth-tooth-width-15mm-outside-diameter-45mm-sku-21411043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 42 teeth tooth width 15mm outside diameter 44mm SKU: 21411042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-42-teeth-tooth-width-15mm-outside-diameter-44mm-sku-21411042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 41 teeth tooth width 15mm outside diameter 43mm SKU: 21411041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-41-teeth-tooth-width-15mm-outside-diameter-43mm-sku-21411041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 40 teeth tooth width 15mm outside diameter 42mm SKU: 21411040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-40-teeth-tooth-width-15mm-outside-diameter-42mm-sku-21411040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 39 teeth tooth width 15mm outside diameter 41mm SKU: 21411039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-39-teeth-tooth-width-15mm-outside-diameter-41mm-sku-21411039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 38 teeth tooth width 15mm outside diameter 40mm SKU: 21411038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-38-teeth-tooth-width-15mm-outside-diameter-40mm-sku-21411038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 37 teeth tooth width 15mm outside diameter 39mm SKU: 21411037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-37-teeth-tooth-width-15mm-outside-diameter-39mm-sku-21411037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 36 teeth tooth width 15mm outside diameter 38mm SKU: 21411036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-36-teeth-tooth-width-15mm-outside-diameter-38mm-sku-21411036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 35 teeth tooth width 15mm outside diameter 37mm SKU: 21411035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-35-teeth-tooth-width-15mm-outside-diameter-37mm-sku-21411035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 34 teeth tooth width 15mm outside diameter 36mm SKU: 21411034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-34-teeth-tooth-width-15mm-outside-diameter-36mm-sku-21411034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 33 teeth tooth width 15mm outside diameter 35mm SKU: 21411033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-33-teeth-tooth-width-15mm-outside-diameter-35mm-sku-21411033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 32 teeth tooth width 15mm outside diameter 34mm SKU: 21411032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-32-teeth-tooth-width-15mm-outside-diameter-34mm-sku-21411032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 43 teeth tooth width 17mm outside diameter 67.5mm SKU: 21811043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-43-teeth-tooth-width-17mm-outside-diameter-67-5mm-sku-21811043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 42 teeth tooth width 17mm outside diameter 66mm SKU: 21811042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-42-teeth-tooth-width-17mm-outside-diameter-66mm-sku-21811042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 41 teeth tooth width 17mm outside diameter 64.5mm SKU: 21811041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-41-teeth-tooth-width-17mm-outside-diameter-64-5mm-sku-21811041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21811040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21811040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 39 teeth tooth width 17mm outside diameter 61.5mm SKU: 21811039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-39-teeth-tooth-width-17mm-outside-diameter-61-5mm-sku-21811039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 38 teeth tooth width 17mm outside diameter 60mm SKU: 21811038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-38-teeth-tooth-width-17mm-outside-diameter-60mm-sku-21811038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 37 teeth tooth width 17mm outside diameter 58.5mm SKU: 21811037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-37-teeth-tooth-width-17mm-outside-diameter-58-5mm-sku-21811037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21811036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21811036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 35 teeth tooth width 17mm outside diameter 55.5mm SKU: 21811035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-35-teeth-tooth-width-17mm-outside-diameter-55-5mm-sku-21811035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 34 teeth tooth width 17mm outside diameter 54mm SKU: 21811034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-34-teeth-tooth-width-17mm-outside-diameter-54mm-sku-21811034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 33 teeth tooth width 17mm outside diameter 52.5mm SKU: 21811033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-33-teeth-tooth-width-17mm-outside-diameter-52-5mm-sku-21811033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21811032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21811032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 31 teeth tooth width 17mm outside diameter 49.5mm SKU: 21811031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-31-teeth-tooth-width-17mm-outside-diameter-49-5mm-sku-21811031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21811030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21811030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 29 teeth tooth width 17mm outside diameter 46.5mm SKU: 21811029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-29-teeth-tooth-width-17mm-outside-diameter-46-5mm-sku-21811029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 28 teeth tooth width 17mm outside diameter 45mm SKU: 21811028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-28-teeth-tooth-width-17mm-outside-diameter-45mm-sku-21811028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 27 teeth tooth width 17mm outside diameter 43.5mm SKU: 21811027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-27-teeth-tooth-width-17mm-outside-diameter-43-5mm-sku-21811027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 26 teeth tooth width 17mm outside diameter 42mm SKU: 21811026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-26-teeth-tooth-width-17mm-outside-diameter-42mm-sku-21811026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21811025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21811025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 24 teeth tooth width 17mm outside diameter 39mm SKU: 21811024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-24-teeth-tooth-width-17mm-outside-diameter-39mm-sku-21811024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 23 teeth tooth width 17mm outside diameter 37.5mm SKU: 21811023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-23-teeth-tooth-width-17mm-outside-diameter-37-5mm-sku-21811023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 22 teeth tooth width 17mm outside diameter 36mm SKU: 21811022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-22-teeth-tooth-width-17mm-outside-diameter-36mm-sku-21811022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 21 teeth tooth width 17mm outside diameter 34.5mm SKU: 21811021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-21-teeth-tooth-width-17mm-outside-diameter-34-5mm-sku-21811021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 20 teeth tooth width 17mm outside diameter 33mm SKU: 21811020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-20-teeth-tooth-width-17mm-outside-diameter-33mm-sku-21811020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 19 teeth tooth width 17mm outside diameter 31.5mm SKU: 21811019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-19-teeth-tooth-width-17mm-outside-diameter-31-5mm-sku-21811019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 18 teeth tooth width 17mm outside diameter 30mm SKU: 21811018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-18-teeth-tooth-width-17mm-outside-diameter-30mm-sku-21811018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 17 teeth tooth width 17mm outside diameter 28.5mm SKU: 21811017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-17-teeth-tooth-width-17mm-outside-diameter-28-5mm-sku-21811017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 16 teeth tooth width 17mm outside diameter 27mm SKU: 21811016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-16-teeth-tooth-width-17mm-outside-diameter-27mm-sku-21811016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 15 teeth tooth width 17mm outside diameter 25.5mm SKU: 21811015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-15-teeth-tooth-width-17mm-outside-diameter-25-5mm-sku-21811015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 14 teeth tooth width 17mm outside diameter 24mm SKU: 21811014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-14-teeth-tooth-width-17mm-outside-diameter-24mm-sku-21811014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 13 teeth tooth width 17mm outside diameter 22.5mm SKU: 21811013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-13-teeth-tooth-width-17mm-outside-diameter-22-5mm-sku-21811013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 12 teeth tooth width 17mm outside diameter 21mm SKU: 21811012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-12-teeth-tooth-width-17mm-outside-diameter-21mm-sku-21811012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 11 teeth tooth width 17mm outside diameter 19.5mm SKU: 21811011](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-11-teeth-tooth-width-17mm-outside-diameter-19-5mm-sku-21811011/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 100 teeth tooth width 15mm outside diameter 153mm SKU: 21810000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-100-teeth-tooth-width-15mm-outside-diameter-153mm-sku-21810000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 95 teeth tooth width 15mm outside diameter 145.5mm SKU: 21809500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-95-teeth-tooth-width-15mm-outside-diameter-145-5mm-sku-21809500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 90 teeth tooth width 15mm outside diameter 138mm SKU: 21809000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-90-teeth-tooth-width-15mm-outside-diameter-138mm-sku-21809000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 85 teeth tooth width 15mm outside diameter 130.5mm SKU: 21808500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-85-teeth-tooth-width-15mm-outside-diameter-130-5mm-sku-21808500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 82 teeth tooth width 15mm outside diameter 126mm SKU: 21808200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-82-teeth-tooth-width-15mm-outside-diameter-126mm-sku-21808200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 80 teeth tooth width 15mm outside diameter 123mm SKU: 21808000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-123mm-sku-21808000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 78 teeth tooth width 15mm outside diameter 120mm SKU: 21807800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-78-teeth-tooth-width-15mm-outside-diameter-120mm-sku-21807800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 76 teeth tooth width 15mm outside diameter 117mm SKU: 21807600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-76-teeth-tooth-width-15mm-outside-diameter-117mm-sku-21807600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 75 teeth tooth width 15mm outside diameter 115.5mm SKU: 21807500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-75-teeth-tooth-width-15mm-outside-diameter-115-5mm-sku-21807500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 74 teeth tooth width 15mm outside diameter 114mm SKU: 21807400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-74-teeth-tooth-width-15mm-outside-diameter-114mm-sku-21807400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 72 teeth tooth width 15mm outside diameter 111mm SKU: 21807200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-72-teeth-tooth-width-15mm-outside-diameter-111mm-sku-21807200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 70 teeth tooth width 15mm outside diameter 108mm SKU: 21807000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-108mm-sku-21807000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 68 teeth tooth width 15mm outside diameter 105mm SKU: 21806800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-68-teeth-tooth-width-15mm-outside-diameter-105mm-sku-21806800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 65 teeth tooth width 15mm outside diameter 100.5mm SKU: 21806500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-65-teeth-tooth-width-15mm-outside-diameter-100-5mm-sku-21806500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 64 teeth tooth width 15mm outside diameter 99mm SKU: 21806400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-64-teeth-tooth-width-15mm-outside-diameter-99mm-sku-21806400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 63 teeth tooth width 15mm outside diameter 97.5mm SKU: 21806300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-63-teeth-tooth-width-15mm-outside-diameter-97-5mm-sku-21806300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 62 teeth tooth width 15mm outside diameter 96mm SKU: 21806200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-62-teeth-tooth-width-15mm-outside-diameter-96mm-sku-21806200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 60 teeth tooth width 15mm outside diameter 93mm SKU: 21806000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-93mm-sku-21806000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 58 teeth tooth width 15mm outside diameter 90mm SKU: 21805800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-58-teeth-tooth-width-15mm-outside-diameter-90mm-sku-21805800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 57 teeth tooth width 15mm outside diameter 88.5mm SKU: 21805700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-57-teeth-tooth-width-15mm-outside-diameter-88-5mm-sku-21805700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 56 teeth tooth width 15mm outside diameter 87mm SKU: 21805600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-56-teeth-tooth-width-15mm-outside-diameter-87mm-sku-21805600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 55 teeth tooth width 15mm outside diameter 85.5mm SKU: 21805500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-55-teeth-tooth-width-15mm-outside-diameter-85-5mm-sku-21805500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 54 teeth tooth width 15mm outside diameter 84mm SKU: 21805400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-54-teeth-tooth-width-15mm-outside-diameter-84mm-sku-21805400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 52 teeth tooth width 15mm outside diameter 81mm SKU: 21805200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-52-teeth-tooth-width-15mm-outside-diameter-81mm-sku-21805200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 50 teeth tooth width 15mm outside diameter 78mm SKU: 21805000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-78mm-sku-21805000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 48 teeth tooth width 15mm outside diameter 75mm SKU: 21804800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-75mm-sku-21804800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 46 teeth tooth width 15mm outside diameter 72mm SKU: 21804600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-46-teeth-tooth-width-15mm-outside-diameter-72mm-sku-21804600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 45 teeth tooth width 15mm outside diameter 70.5mm SKU: 21804500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-70-5mm-sku-21804500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 44 teeth tooth width 15mm outside diameter 69mm SKU: 21804400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-44-teeth-tooth-width-15mm-outside-diameter-69mm-sku-21804400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 42 teeth tooth width 15mm outside diameter 66mm SKU: 21804200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-42-teeth-tooth-width-15mm-outside-diameter-66mm-sku-21804200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 40 teeth tooth width 15mm outside diameter 63mm SKU: 21804000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-63mm-sku-21804000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 38 teeth tooth width 15mm outside diameter 60mm SKU: 21803800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-38-teeth-tooth-width-15mm-outside-diameter-60mm-sku-21803800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 36 teeth tooth width 15mm outside diameter 57mm SKU: 21803600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-36-teeth-tooth-width-15mm-outside-diameter-57mm-sku-21803600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 35 teeth tooth width 15mm outside diameter 55.5mm SKU: 21803500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-35-teeth-tooth-width-15mm-outside-diameter-55-5mm-sku-21803500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 34 teeth tooth width 15mm outside diameter 54mm SKU: 21803400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-34-teeth-tooth-width-15mm-outside-diameter-54mm-sku-21803400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 32 teeth tooth width 15mm outside diameter 51mm SKU: 21803200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-32-teeth-tooth-width-15mm-outside-diameter-51mm-sku-21803200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 31 teeth tooth width 15mm outside diameter 49.5mm SKU: 21803100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-31-teeth-tooth-width-15mm-outside-diameter-49-5mm-sku-21803100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 30 teeth tooth width 15mm outside diameter 48mm SKU: 21803000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-48mm-sku-21803000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 28 teeth tooth width 15mm outside diameter 45mm SKU: 21802800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-28-teeth-tooth-width-15mm-outside-diameter-45mm-sku-21802800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 27 teeth tooth width 15mm outside diameter 43.5mm SKU: 21802700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-27-teeth-tooth-width-15mm-outside-diameter-43-5mm-sku-21802700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 26 teeth tooth width 15mm outside diameter 42mm SKU: 21802600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-26-teeth-tooth-width-15mm-outside-diameter-42mm-sku-21802600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 25 teeth tooth width 15mm outside diameter 40.5mm SKU: 21802500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-40-5mm-sku-21802500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 24 teeth tooth width 15mm outside diameter 39mm SKU: 21802400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-24-teeth-tooth-width-15mm-outside-diameter-39mm-sku-21802400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 23 teeth tooth width 15mm outside diameter 37.5mm SKU: 21802300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-23-teeth-tooth-width-15mm-outside-diameter-37-5mm-sku-21802300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 22 teeth tooth width 15mm outside diameter 36mm SKU: 21802200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-22-teeth-tooth-width-15mm-outside-diameter-36mm-sku-21802200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 21 teeth tooth width 15mm outside diameter 34.5mm SKU: 21802100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-21-teeth-tooth-width-15mm-outside-diameter-34-5mm-sku-21802100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 20 teeth tooth width 15mm outside diameter 33mm SKU: 21802000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-20-teeth-tooth-width-15mm-outside-diameter-33mm-sku-21802000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 19 teeth tooth width 15mm outside diameter 31.5mm SKU: 21801900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-19-teeth-tooth-width-15mm-outside-diameter-31-5mm-sku-21801900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 18 teeth tooth width 15mm outside diameter 30mm SKU: 21801800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-18-teeth-tooth-width-15mm-outside-diameter-30mm-sku-21801800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 17 teeth tooth width 15mm outside diameter 28.5mm SKU: 21801700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-17-teeth-tooth-width-15mm-outside-diameter-28-5mm-sku-21801700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 16 teeth tooth width 15mm outside diameter 27mm SKU: 21801600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-16-teeth-tooth-width-15mm-outside-diameter-27mm-sku-21801600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 15 teeth tooth width 15mm outside diameter 25.5mm SKU: 21801500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-15-teeth-tooth-width-15mm-outside-diameter-25-5mm-sku-21801500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 14 teeth tooth width 15mm outside diameter 24mm SKU: 21801400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-14-teeth-tooth-width-15mm-outside-diameter-24mm-sku-21801400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 13 teeth tooth width 15mm outside diameter 22.5mm SKU: 21801300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-13-teeth-tooth-width-15mm-outside-diameter-22-5mm-sku-21801300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 12 teeth tooth width 15mm outside diameter 21mm SKU: 21801200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-12-teeth-tooth-width-15mm-outside-diameter-21mm-sku-21801200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 11 teeth tooth width 15mm outside diameter 19.5mm SKU: 21801100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-11-teeth-tooth-width-15mm-outside-diameter-19-5mm-sku-21801100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 80 teeth tooth width 10mm outside diameter 123mm SKU: 21708000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-80-teeth-tooth-width-10mm-outside-diameter-123mm-sku-21708000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 70 teeth tooth width 10mm outside diameter 108mm SKU: 21707000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-70-teeth-tooth-width-10mm-outside-diameter-108mm-sku-21707000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 65 teeth tooth width 10mm outside diameter 100.5mm SKU: 21706500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-65-teeth-tooth-width-10mm-outside-diameter-100-5mm-sku-21706500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 60 teeth tooth width 10mm outside diameter 93mm SKU: 21706000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-60-teeth-tooth-width-10mm-outside-diameter-93mm-sku-21706000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 55 teeth tooth width 10mm outside diameter 85.5mm SKU: 21705500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-55-teeth-tooth-width-10mm-outside-diameter-85-5mm-sku-21705500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 50 teeth tooth width 10mm outside diameter 78mm SKU: 21705000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-50-teeth-tooth-width-10mm-outside-diameter-78mm-sku-21705000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 48 teeth tooth width 10mm outside diameter 75mm SKU: 21704800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-48-teeth-tooth-width-10mm-outside-diameter-75mm-sku-21704800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 45 teeth tooth width 10mm outside diameter 70.5mm SKU: 21704500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-45-teeth-tooth-width-10mm-outside-diameter-70-5mm-sku-21704500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 42 teeth tooth width 10mm outside diameter 66mm SKU: 21704200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-42-teeth-tooth-width-10mm-outside-diameter-66mm-sku-21704200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 40 teeth tooth width 10mm outside diameter 63mm SKU: 21704000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-40-teeth-tooth-width-10mm-outside-diameter-63mm-sku-21704000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 35 teeth tooth width 10mm outside diameter 55.5mm SKU: 21703500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-35-teeth-tooth-width-10mm-outside-diameter-55-5mm-sku-21703500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 110 teeth tooth width 10mm outside diameter 112mm SKU: 22411000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-110-teeth-tooth-width-10mm-outside-diameter-112mm-sku-22411000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 105 teeth tooth width 10mm outside diameter 107mm SKU: 22410500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-105-teeth-tooth-width-10mm-outside-diameter-107mm-sku-22410500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 100 teeth tooth width 10mm outside diameter 102mm SKU: 22410000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-100-teeth-tooth-width-10mm-outside-diameter-102mm-sku-22410000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 96 teeth tooth width 10mm outside diameter 98mm SKU: 22409600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-96-teeth-tooth-width-10mm-outside-diameter-98mm-sku-22409600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 92 teeth tooth width 10mm outside diameter 94mm SKU: 22409200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-92-teeth-tooth-width-10mm-outside-diameter-94mm-sku-22409200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 90 teeth tooth width 10mm outside diameter 92mm SKU: 22409000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-90-teeth-tooth-width-10mm-outside-diameter-92mm-sku-22409000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 85 teeth tooth width 10mm outside diameter 87mm SKU: 22408500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-85-teeth-tooth-width-10mm-outside-diameter-87mm-sku-22408500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 84 teeth tooth width 10mm outside diameter 86mm SKU: 22408400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-84-teeth-tooth-width-10mm-outside-diameter-86mm-sku-22408400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 82 teeth tooth width 10mm outside diameter 84mm SKU: 22408200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-82-teeth-tooth-width-10mm-outside-diameter-84mm-sku-22408200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 80 teeth tooth width 10mm outside diameter 82mm SKU: 22408000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-80-teeth-tooth-width-10mm-outside-diameter-82mm-sku-22408000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 79 teeth tooth width 10mm outside diameter 81mm SKU: 22407900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-79-teeth-tooth-width-10mm-outside-diameter-81mm-sku-22407900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 78 teeth tooth width 10mm outside diameter 80mm SKU: 22407800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-78-teeth-tooth-width-10mm-outside-diameter-80mm-sku-22407800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 77 teeth tooth width 10mm outside diameter 79mm SKU: 22407700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-77-teeth-tooth-width-10mm-outside-diameter-79mm-sku-22407700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 76 teeth tooth width 10mm outside diameter 78mm SKU: 22407600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-76-teeth-tooth-width-10mm-outside-diameter-78mm-sku-22407600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 75 teeth tooth width 10mm outside diameter 77mm SKU: 22407500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-75-teeth-tooth-width-10mm-outside-diameter-77mm-sku-22407500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 73 teeth tooth width 10mm outside diameter 75mm SKU: 22407300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-73-teeth-tooth-width-10mm-outside-diameter-75mm-sku-22407300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 72 teeth tooth width 10mm outside diameter 74mm SKU: 22407200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-72-teeth-tooth-width-10mm-outside-diameter-74mm-sku-22407200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 71 teeth tooth width 10mm outside diameter 73mm SKU: 22407100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-71-teeth-tooth-width-10mm-outside-diameter-73mm-sku-22407100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 70 teeth tooth width 10mm outside diameter 72mm SKU: 22407000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-70-teeth-tooth-width-10mm-outside-diameter-72mm-sku-22407000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 69 teeth tooth width 10mm outside diameter 71mm SKU: 22406900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-69-teeth-tooth-width-10mm-outside-diameter-71mm-sku-22406900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 68 teeth tooth width 10mm outside diameter 70mm SKU: 22406800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-68-teeth-tooth-width-10mm-outside-diameter-70mm-sku-22406800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 67 teeth tooth width 10mm outside diameter 69mm SKU: 22406700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-67-teeth-tooth-width-10mm-outside-diameter-69mm-sku-22406700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 66 teeth tooth width 10mm outside diameter 68mm SKU: 22406600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-66-teeth-tooth-width-10mm-outside-diameter-68mm-sku-22406600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 65 teeth tooth width 10mm outside diameter 67mm SKU: 22406500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-65-teeth-tooth-width-10mm-outside-diameter-67mm-sku-22406500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 64 teeth tooth width 10mm outside diameter 66mm SKU: 22406400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-64-teeth-tooth-width-10mm-outside-diameter-66mm-sku-22406400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 63 teeth tooth width 10mm outside diameter 65mm SKU: 22406300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-63-teeth-tooth-width-10mm-outside-diameter-65mm-sku-22406300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 61 teeth tooth width 10mm outside diameter 63mm SKU: 22406100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-61-teeth-tooth-width-10mm-outside-diameter-63mm-sku-22406100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 60 teeth tooth width 10mm outside diameter 62mm SKU: 22406000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-60-teeth-tooth-width-10mm-outside-diameter-62mm-sku-22406000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 59 teeth tooth width 10mm outside diameter 61mm SKU: 22405900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-59-teeth-tooth-width-10mm-outside-diameter-61mm-sku-22405900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 56 teeth tooth width 10mm outside diameter 58mm SKU: 22405600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-56-teeth-tooth-width-10mm-outside-diameter-58mm-sku-22405600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 55 teeth tooth width 10mm outside diameter 57mm SKU: 22405500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-55-teeth-tooth-width-10mm-outside-diameter-57mm-sku-22405500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 54 teeth tooth width 10mm outside diameter 56mm SKU: 22405400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-54-teeth-tooth-width-10mm-outside-diameter-56mm-sku-22405400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 53 teeth tooth width 10mm outside diameter 55mm SKU: 22405300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-53-teeth-tooth-width-10mm-outside-diameter-55mm-sku-22405300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 52 teeth tooth width 10mm outside diameter 54mm SKU: 22405200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-52-teeth-tooth-width-10mm-outside-diameter-54mm-sku-22405200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 51 teeth tooth width 10mm outside diameter 53mm SKU: 22405100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-51-teeth-tooth-width-10mm-outside-diameter-53mm-sku-22405100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 50 teeth tooth width 10mm outside diameter 52mm SKU: 22405000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-50-teeth-tooth-width-10mm-outside-diameter-52mm-sku-22405000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 49 teeth tooth width 10mm outside diameter 51mm SKU: 22404900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-49-teeth-tooth-width-10mm-outside-diameter-51mm-sku-22404900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 48 teeth tooth width 10mm outside diameter 50mm SKU: 22404800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-48-teeth-tooth-width-10mm-outside-diameter-50mm-sku-22404800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 47 teeth tooth width 10mm outside diameter 49mm SKU: 22404700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-47-teeth-tooth-width-10mm-outside-diameter-49mm-sku-22404700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 46 teeth tooth width 10mm outside diameter 48mm SKU: 22404600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-46-teeth-tooth-width-10mm-outside-diameter-48mm-sku-22404600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 45 teeth tooth width 10mm outside diameter 47mm SKU: 22404500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-45-teeth-tooth-width-10mm-outside-diameter-47mm-sku-22404500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 44 teeth tooth width 10mm outside diameter 46mm SKU: 22404400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-44-teeth-tooth-width-10mm-outside-diameter-46mm-sku-22404400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 43 teeth tooth width 10mm outside diameter 45mm SKU: 22404300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-43-teeth-tooth-width-10mm-outside-diameter-45mm-sku-22404300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 42 teeth tooth width 10mm outside diameter 44mm SKU: 22404200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-42-teeth-tooth-width-10mm-outside-diameter-44mm-sku-22404200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 41 teeth tooth width 10mm outside diameter 43mm SKU: 22404100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-41-teeth-tooth-width-10mm-outside-diameter-43mm-sku-22404100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 40 teeth tooth width 10mm outside diameter 42mm SKU: 22404000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-40-teeth-tooth-width-10mm-outside-diameter-42mm-sku-22404000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 39 teeth tooth width 10mm outside diameter 41mm SKU: 22403900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-39-teeth-tooth-width-10mm-outside-diameter-41mm-sku-22403900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 38 teeth tooth width 10mm outside diameter 40mm SKU: 22403800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-38-teeth-tooth-width-10mm-outside-diameter-40mm-sku-22403800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 37 teeth tooth width 10mm outside diameter 39mm SKU: 22403700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-37-teeth-tooth-width-10mm-outside-diameter-39mm-sku-22403700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 36 teeth tooth width 10mm outside diameter 38mm SKU: 22403600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-36-teeth-tooth-width-10mm-outside-diameter-38mm-sku-22403600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 35 teeth tooth width 10mm outside diameter 37mm SKU: 22403500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-35-teeth-tooth-width-10mm-outside-diameter-37mm-sku-22403500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 34 teeth tooth width 10mm outside diameter 36mm SKU: 22403400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-34-teeth-tooth-width-10mm-outside-diameter-36mm-sku-22403400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 33 teeth tooth width 10mm outside diameter 35mm SKU: 22403300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-33-teeth-tooth-width-10mm-outside-diameter-35mm-sku-22403300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 32 teeth tooth width 10mm outside diameter 34mm SKU: 22403200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-32-teeth-tooth-width-10mm-outside-diameter-34mm-sku-22403200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 30 teeth tooth width 10mm outside diameter 32mm SKU: 22403000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-30-teeth-tooth-width-10mm-outside-diameter-32mm-sku-22403000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 28 teeth tooth width 10mm outside diameter 30mm SKU: 22402800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-28-teeth-tooth-width-10mm-outside-diameter-30mm-sku-22402800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 27 teeth tooth width 10mm outside diameter 29mm SKU: 22402700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-27-teeth-tooth-width-10mm-outside-diameter-29mm-sku-22402700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 26 teeth tooth width 10mm outside diameter 28mm SKU: 22402600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-26-teeth-tooth-width-10mm-outside-diameter-28mm-sku-22402600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 25 teeth tooth width 10mm outside diameter 27mm SKU: 22402500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-teeth-tooth-width-10mm-outside-diameter-27mm-sku-22402500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 24 teeth tooth width 10mm outside diameter 26mm SKU: 22402400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-24-teeth-tooth-width-10mm-outside-diameter-26mm-sku-22402400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 23 teeth tooth width 10mm outside diameter 25mm SKU: 22402300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-23-teeth-tooth-width-10mm-outside-diameter-25mm-sku-22402300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 22 teeth tooth width 10mm outside diameter 24mm SKU: 22402200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-22-teeth-tooth-width-10mm-outside-diameter-24mm-sku-22402200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 21 teeth tooth width 10mm outside diameter 23mm SKU: 22402100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-21-teeth-tooth-width-10mm-outside-diameter-23mm-sku-22402100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 20 teeth tooth width 10mm outside diameter 22mm SKU: 22402000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-20-teeth-tooth-width-10mm-outside-diameter-22mm-sku-22402000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 18 teeth tooth width 10mm outside diameter 20mm SKU: 22401800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-18-teeth-tooth-width-10mm-outside-diameter-20mm-sku-22401800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 120 teeth tooth width 15mm outside diameter 183mm SKU: 21812000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-120-teeth-tooth-width-15mm-outside-diameter-183mm-sku-21812000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 114 teeth tooth width 15mm outside diameter 174mm SKU: 21811400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-114-teeth-tooth-width-15mm-outside-diameter-174mm-sku-21811400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 21811120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-21811120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 100 teeth tooth width 17mm outside diameter 153mm SKU: 21811100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-100-teeth-tooth-width-17mm-outside-diameter-153mm-sku-21811100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 90 teeth tooth width 17mm outside diameter 138mm SKU: 21811090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-90-teeth-tooth-width-17mm-outside-diameter-138mm-sku-21811090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21811080](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21811080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 75 teeth tooth width 17mm outside diameter 115.5mm SKU: 21811075](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-75-teeth-tooth-width-17mm-outside-diameter-115-5mm-sku-21811075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 72 teeth tooth width 17mm outside diameter 111mm SKU: 21811072](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-72-teeth-tooth-width-17mm-outside-diameter-111mm-sku-21811072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 70 teeth tooth width 17mm outside diameter 108mm SKU: 21811070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-70-teeth-tooth-width-17mm-outside-diameter-108mm-sku-21811070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 69 teeth tooth width 17mm outside diameter 106.5mm SKU: 21811069](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-69-teeth-tooth-width-17mm-outside-diameter-106-5mm-sku-21811069/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 68 teeth tooth width 17mm outside diameter 105mm SKU: 21811068](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-68-teeth-tooth-width-17mm-outside-diameter-105mm-sku-21811068/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 67 teeth tooth width 17mm outside diameter 103.5mm SKU: 21811067](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-67-teeth-tooth-width-17mm-outside-diameter-103-5mm-sku-21811067/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 66 teeth tooth width 17mm outside diameter 102mm SKU: 21811066](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-66-teeth-tooth-width-17mm-outside-diameter-102mm-sku-21811066/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 65 teeth tooth width 17mm outside diameter 100.5mm SKU: 21811065](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-65-teeth-tooth-width-17mm-outside-diameter-100-5mm-sku-21811065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 64 teeth tooth width 17mm outside diameter 99mm SKU: 21811064](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-64-teeth-tooth-width-17mm-outside-diameter-99mm-sku-21811064/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 63 teeth tooth width 17mm outside diameter 97.5mm SKU: 21811063](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-63-teeth-tooth-width-17mm-outside-diameter-97-5mm-sku-21811063/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 62 teeth tooth width 17mm outside diameter 96mm SKU: 21811062](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-62-teeth-tooth-width-17mm-outside-diameter-96mm-sku-21811062/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 61 teeth tooth width 17mm outside diameter 94.5mm SKU: 21811061](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-61-teeth-tooth-width-17mm-outside-diameter-94-5mm-sku-21811061/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21811060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21811060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 59 teeth tooth width 17mm outside diameter 91.5mm SKU: 21811059](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-59-teeth-tooth-width-17mm-outside-diameter-91-5mm-sku-21811059/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 58 teeth tooth width 17mm outside diameter 90mm SKU: 21811058](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-58-teeth-tooth-width-17mm-outside-diameter-90mm-sku-21811058/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 57 teeth tooth width 17mm outside diameter 88.5mm SKU: 21811057](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-57-teeth-tooth-width-17mm-outside-diameter-88-5mm-sku-21811057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 56 teeth tooth width 17mm outside diameter 87mm SKU: 21811056](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-56-teeth-tooth-width-17mm-outside-diameter-87mm-sku-21811056/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 55 teeth tooth width 17mm outside diameter 85.5mm SKU: 21811055](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-55-teeth-tooth-width-17mm-outside-diameter-85-5mm-sku-21811055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 54 teeth tooth width 17mm outside diameter 84mm SKU: 21811054](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-54-teeth-tooth-width-17mm-outside-diameter-84mm-sku-21811054/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 53 teeth tooth width 17mm outside diameter 82.5mm SKU: 21811053](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-53-teeth-tooth-width-17mm-outside-diameter-82-5mm-sku-21811053/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 52 teeth tooth width 17mm outside diameter 81mm SKU: 21811052](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-52-teeth-tooth-width-17mm-outside-diameter-81mm-sku-21811052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 51 teeth tooth width 17mm outside diameter 79.5mm SKU: 21811051](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-51-teeth-tooth-width-17mm-outside-diameter-79-5mm-sku-21811051/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21811050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21811050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 49 teeth tooth width 17mm outside diameter 76.5mm SKU: 21811049](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-49-teeth-tooth-width-17mm-outside-diameter-76-5mm-sku-21811049/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 21811048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-21811048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 47 teeth tooth width 17mm outside diameter 73.5mm SKU: 21811047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-47-teeth-tooth-width-17mm-outside-diameter-73-5mm-sku-21811047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 46 teeth tooth width 17mm outside diameter 72mm SKU: 21811046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-46-teeth-tooth-width-17mm-outside-diameter-72mm-sku-21811046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21811045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21811045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 44 teeth tooth width 17mm outside diameter 69mm SKU: 21811044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-44-teeth-tooth-width-17mm-outside-diameter-69mm-sku-21811044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 65 teeth tooth width 15mm outside diameter 100.5mm SKU: 22806500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-65-teeth-tooth-width-15mm-outside-diameter-100-5mm-sku-22806500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 64 teeth tooth width 15mm outside diameter 99mm SKU: 22806400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-64-teeth-tooth-width-15mm-outside-diameter-99mm-sku-22806400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 60 teeth tooth width 15mm outside diameter 93mm SKU: 22806000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-93mm-sku-22806000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 56 teeth tooth width 15mm outside diameter 87mm SKU: 22805600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-56-teeth-tooth-width-15mm-outside-diameter-87mm-sku-22805600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 55 teeth tooth width 15mm outside diameter 85.5mm SKU: 22805500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-55-teeth-tooth-width-15mm-outside-diameter-85-5mm-sku-22805500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 54 teeth tooth width 15mm outside diameter 84mm SKU: 22805400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-54-teeth-tooth-width-15mm-outside-diameter-84mm-sku-22805400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 53 teeth tooth width 15mm outside diameter 82.5mm SKU: 22805300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-53-teeth-tooth-width-15mm-outside-diameter-82-5mm-sku-22805300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 52 teeth tooth width 15mm outside diameter 81mm SKU: 22805200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-52-teeth-tooth-width-15mm-outside-diameter-81mm-sku-22805200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 51 teeth tooth width 15mm outside diameter 79.5mm SKU: 22805100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-51-teeth-tooth-width-15mm-outside-diameter-79-5mm-sku-22805100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 50 teeth tooth width 15mm outside diameter 78mm SKU: 22805000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-78mm-sku-22805000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 48 teeth tooth width 15mm outside diameter 75mm SKU: 22804800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-75mm-sku-22804800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 47 teeth tooth width 15mm outside diameter 73.5mm SKU: 22804700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-47-teeth-tooth-width-15mm-outside-diameter-73-5mm-sku-22804700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 45 teeth tooth width 15mm outside diameter 70.5mm SKU: 22804500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-70-5mm-sku-22804500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 43 teeth tooth width 15mm outside diameter 67.5mm SKU: 22804300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-43-teeth-tooth-width-15mm-outside-diameter-67-5mm-sku-22804300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 41 teeth tooth width 15mm outside diameter 64.5mm SKU: 22804100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-41-teeth-tooth-width-15mm-outside-diameter-64-5mm-sku-22804100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 without hub module 1.5 40 teeth tooth width 15mm outside diameter 63mm SKU: 22804000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-without-hub-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-63mm-sku-22804000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 39 teeth tooth width 15mm outside diameter 61.5mm SKU: 22803900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-39-teeth-tooth-width-15mm-outside-diameter-61-5mm-sku-22803900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 38 teeth tooth width 15mm outside diameter 60mm SKU: 22803800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-38-teeth-tooth-width-15mm-outside-diameter-60mm-sku-22803800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 37 teeth tooth width 15mm outside diameter 58.5mm SKU: 22803700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-37-teeth-tooth-width-15mm-outside-diameter-58-5mm-sku-22803700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 36 teeth tooth width 15mm outside diameter 57mm SKU: 22803600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-36-teeth-tooth-width-15mm-outside-diameter-57mm-sku-22803600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 35 teeth tooth width 15mm outside diameter 55.5mm SKU: 22803500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-35-teeth-tooth-width-15mm-outside-diameter-55-5mm-sku-22803500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 33 teeth tooth width 15mm outside diameter 52.5mm SKU: 22803300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-33-teeth-tooth-width-15mm-outside-diameter-52-5mm-sku-22803300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 32 teeth tooth width 15mm outside diameter 51mm SKU: 22803200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-32-teeth-tooth-width-15mm-outside-diameter-51mm-sku-22803200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 30 teeth tooth width 15mm outside diameter 48mm SKU: 22803000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-48mm-sku-22803000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 29 teeth tooth width 15mm outside diameter 46.5mm SKU: 22802900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-29-teeth-tooth-width-15mm-outside-diameter-46-5mm-sku-22802900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 28 teeth tooth width 15mm outside diameter 45mm SKU: 22802800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-28-teeth-tooth-width-15mm-outside-diameter-45mm-sku-22802800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 27 teeth tooth width 15mm outside diameter 43.5mm SKU: 22802700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-27-teeth-tooth-width-15mm-outside-diameter-43-5mm-sku-22802700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 26 teeth tooth width 15mm outside diameter 42mm SKU: 22802600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-26-teeth-tooth-width-15mm-outside-diameter-42mm-sku-22802600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 25 teeth tooth width 15mm outside diameter 40.5mm SKU: 22802500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-40-5mm-sku-22802500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 24 teeth tooth width 15mm outside diameter 39mm SKU: 22802400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-24-teeth-tooth-width-15mm-outside-diameter-39mm-sku-22802400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 23 teeth tooth width 15mm outside diameter 37.5mm SKU: 22802300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-23-teeth-tooth-width-15mm-outside-diameter-37-5mm-sku-22802300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 21 teeth tooth width 15mm outside diameter 34.5mm SKU: 22802100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-21-teeth-tooth-width-15mm-outside-diameter-34-5mm-sku-22802100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 20 teeth tooth width 15mm outside diameter 33mm SKU: 22802000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-20-teeth-tooth-width-15mm-outside-diameter-33mm-sku-22802000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 18 teeth tooth width 15mm outside diameter 30mm SKU: 22801800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-18-teeth-tooth-width-15mm-outside-diameter-30mm-sku-22801800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 120 teeth tooth width 10mm outside diameter 152.5mm SKU: 22612000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-120-teeth-tooth-width-10mm-outside-diameter-152-5mm-sku-22612000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 114 teeth tooth width 10mm outside diameter 145mm SKU: 22611400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-114-teeth-tooth-width-10mm-outside-diameter-145mm-sku-22611400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 100 teeth tooth width 10mm outside diameter 127.5mm SKU: 22610000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-100-teeth-tooth-width-10mm-outside-diameter-127-5mm-sku-22610000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 95 teeth tooth width 10mm outside diameter 121.25mm SKU: 22609500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-95-teeth-tooth-width-10mm-outside-diameter-121-25mm-sku-22609500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 90 teeth tooth width 10mm outside diameter 115mm SKU: 22609000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-90-teeth-tooth-width-10mm-outside-diameter-115mm-sku-22609000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 80 teeth tooth width 10mm outside diameter 102.5mm SKU: 22608000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-80-teeth-tooth-width-10mm-outside-diameter-102-5mm-sku-22608000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 75 teeth tooth width 10mm outside diameter 96.25mm SKU: 22607500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-75-teeth-tooth-width-10mm-outside-diameter-96-25mm-sku-22607500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 72 teeth tooth width 10mm outside diameter 92.5mm SKU: 22607200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-72-teeth-tooth-width-10mm-outside-diameter-92-5mm-sku-22607200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 70 teeth tooth width 10mm outside diameter 90mm SKU: 22607000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-70-teeth-tooth-width-10mm-outside-diameter-90mm-sku-22607000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 64 teeth tooth width 10mm outside diameter 82.5mm SKU: 22606400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-64-teeth-tooth-width-10mm-outside-diameter-82-5mm-sku-22606400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 60 teeth tooth width 10mm outside diameter 77.5mm SKU: 22606000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-60-teeth-tooth-width-10mm-outside-diameter-77-5mm-sku-22606000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 56 teeth tooth width 10mm outside diameter 72.5mm SKU: 22605600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-56-teeth-tooth-width-10mm-outside-diameter-72-5mm-sku-22605600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 55 teeth tooth width 10mm outside diameter 71.25mm SKU: 22605500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-55-teeth-tooth-width-10mm-outside-diameter-71-25mm-sku-22605500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 54 teeth tooth width 10mm outside diameter 70mm SKU: 22605400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-54-teeth-tooth-width-10mm-outside-diameter-70mm-sku-22605400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 52 teeth tooth width 10mm outside diameter 67.5mm SKU: 22605200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-52-teeth-tooth-width-10mm-outside-diameter-67-5mm-sku-22605200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 50 teeth tooth width 10mm outside diameter 65mm SKU: 22605000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-50-teeth-tooth-width-10mm-outside-diameter-65mm-sku-22605000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 48 teeth tooth width 10mm outside diameter 62.5mm SKU: 22604800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-48-teeth-tooth-width-10mm-outside-diameter-62-5mm-sku-22604800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 45 teeth tooth width 10mm outside diameter 58.75mm SKU: 22604500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-45-teeth-tooth-width-10mm-outside-diameter-58-75mm-sku-22604500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 42 teeth tooth width 10mm outside diameter 55mm SKU: 22604200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-42-teeth-tooth-width-10mm-outside-diameter-55mm-sku-22604200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 40 teeth tooth width 10mm outside diameter 52.5mm SKU: 22604000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-40-teeth-tooth-width-10mm-outside-diameter-52-5mm-sku-22604000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 38 teeth tooth width 10mm outside diameter 50mm SKU: 22603800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-38-teeth-tooth-width-10mm-outside-diameter-50mm-sku-22603800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 36 teeth tooth width 10mm outside diameter 47.5mm SKU: 22603600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-36-teeth-tooth-width-10mm-outside-diameter-47-5mm-sku-22603600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 35 teeth tooth width 10mm outside diameter 46.25mm SKU: 22603500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-35-teeth-tooth-width-10mm-outside-diameter-46-25mm-sku-22603500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 34 teeth tooth width 10mm outside diameter 45mm SKU: 22603400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-34-teeth-tooth-width-10mm-outside-diameter-45mm-sku-22603400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 32 teeth tooth width 10mm outside diameter 42.5mm SKU: 22603200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-32-teeth-tooth-width-10mm-outside-diameter-42-5mm-sku-22603200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 30 teeth tooth width 10mm outside diameter 40mm SKU: 22603000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-30-teeth-tooth-width-10mm-outside-diameter-40mm-sku-22603000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 28 teeth tooth width 10mm outside diameter 37.5mm SKU: 22602800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-28-teeth-tooth-width-10mm-outside-diameter-37-5mm-sku-22602800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 27 teeth tooth width 10mm outside diameter 36.25mm SKU: 22602700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-27-teeth-tooth-width-10mm-outside-diameter-36-25mm-sku-22602700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 26 teeth tooth width 10mm outside diameter 35mm SKU: 22602600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-26-teeth-tooth-width-10mm-outside-diameter-35mm-sku-22602600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 25 teeth tooth width 10mm outside diameter 33.75mm SKU: 22602500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-25-teeth-tooth-width-10mm-outside-diameter-33-75mm-sku-22602500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 24 teeth tooth width 10mm outside diameter 32.5mm SKU: 22602400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-24-teeth-tooth-width-10mm-outside-diameter-32-5mm-sku-22602400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 23 teeth tooth width 10mm outside diameter 31.25mm SKU: 22602300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-23-teeth-tooth-width-10mm-outside-diameter-31-25mm-sku-22602300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 22 teeth tooth width 10mm outside diameter 30mm SKU: 22602200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-22-teeth-tooth-width-10mm-outside-diameter-30mm-sku-22602200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 21 teeth tooth width 10mm outside diameter 28.75mm SKU: 22602100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-21-teeth-tooth-width-10mm-outside-diameter-28-75mm-sku-22602100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 20 teeth tooth width 10mm outside diameter 27.5mm SKU: 22602000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-20-teeth-tooth-width-10mm-outside-diameter-27-5mm-sku-22602000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 19 teeth tooth width 10mm outside diameter 26.25mm SKU: 22601900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-19-teeth-tooth-width-10mm-outside-diameter-26-25mm-sku-22601900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 17 teeth tooth width 10mm outside diameter 23.75mm SKU: 22601700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-17-teeth-tooth-width-10mm-outside-diameter-23-75mm-sku-22601700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 16 teeth tooth width 10mm outside diameter 22.5mm SKU: 22601600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-16-teeth-tooth-width-10mm-outside-diameter-22-5mm-sku-22601600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 124 teeth tooth width 10mm outside diameter 126mm SKU: 22412400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-124-teeth-tooth-width-10mm-outside-diameter-126mm-sku-22412400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 120 teeth tooth width 10mm outside diameter 122mm SKU: 22412000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-120-teeth-tooth-width-10mm-outside-diameter-122mm-sku-22412000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 114 teeth tooth width 10mm outside diameter 116mm SKU: 22411400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-114-teeth-tooth-width-10mm-outside-diameter-116mm-sku-22411400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 127 teeth tooth width 15mm outside diameter 129mm SKU: 22411127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-127-teeth-tooth-width-15mm-outside-diameter-129mm-sku-22411127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 120 teeth tooth width 15mm outside diameter 122mm SKU: 22411120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-120-teeth-tooth-width-15mm-outside-diameter-122mm-sku-22411120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 114 teeth tooth width 15mm outside diameter 116mm SKU: 22411114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-114-teeth-tooth-width-15mm-outside-diameter-116mm-sku-22411114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 110 teeth tooth width 15mm outside diameter 112mm SKU: 22411110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-110-teeth-tooth-width-15mm-outside-diameter-112mm-sku-22411110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 100 teeth tooth width 15mm outside diameter 102mm SKU: 22411100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-100-teeth-tooth-width-15mm-outside-diameter-102mm-sku-22411100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 95 teeth tooth width 15mm outside diameter 97mm SKU: 22411095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-95-teeth-tooth-width-15mm-outside-diameter-97mm-sku-22411095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 90 teeth tooth width 15mm outside diameter 92mm SKU: 22411090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-90-teeth-tooth-width-15mm-outside-diameter-92mm-sku-22411090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 85 teeth tooth width 15mm outside diameter 87mm SKU: 22411085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-85-teeth-tooth-width-15mm-outside-diameter-87mm-sku-22411085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 80 teeth tooth width 15mm outside diameter 82mm SKU: 22411080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-80-teeth-tooth-width-15mm-outside-diameter-82mm-sku-22411080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 76 teeth tooth width 15mm outside diameter 78mm SKU: 22411076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-76-teeth-tooth-width-15mm-outside-diameter-78mm-sku-22411076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 75 teeth tooth width 15mm outside diameter 77mm SKU: 22411075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-75-teeth-tooth-width-15mm-outside-diameter-77mm-sku-22411075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 72 teeth tooth width 15mm outside diameter 74mm SKU: 22411072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-72-teeth-tooth-width-15mm-outside-diameter-74mm-sku-22411072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 60 teeth tooth width 15mm outside diameter 62mm SKU: 22411060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-60-teeth-tooth-width-15mm-outside-diameter-62mm-sku-22411060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 52 teeth tooth width 15mm outside diameter 54mm SKU: 22411052](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-52-teeth-tooth-width-15mm-outside-diameter-54mm-sku-22411052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 50 teeth tooth width 15mm outside diameter 52mm SKU: 22411050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-50-teeth-tooth-width-15mm-outside-diameter-52mm-sku-22411050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 48 teeth tooth width 15mm outside diameter 50mm SKU: 22411048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-48-teeth-tooth-width-15mm-outside-diameter-50mm-sku-22411048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 45 teeth tooth width 15mm outside diameter 47mm SKU: 22411045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-45-teeth-tooth-width-15mm-outside-diameter-47mm-sku-22411045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 40 teeth tooth width 15mm outside diameter 42mm SKU: 22411040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-40-teeth-tooth-width-15mm-outside-diameter-42mm-sku-22411040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 36 teeth tooth width 15mm outside diameter 38mm SKU: 22411036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-36-teeth-tooth-width-15mm-outside-diameter-38mm-sku-22411036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 35 teeth tooth width 15mm outside diameter 37mm SKU: 22411035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-35-teeth-tooth-width-15mm-outside-diameter-37mm-sku-22411035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 30 teeth tooth width 15mm outside diameter 32mm SKU: 22411030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-30-teeth-tooth-width-15mm-outside-diameter-32mm-sku-22411030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 25 teeth tooth width 15mm outside diameter 27mm SKU: 22411025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-teeth-tooth-width-15mm-outside-diameter-27mm-sku-22411025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 24 teeth tooth width 15mm outside diameter 26mm SKU: 22411024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-24-teeth-tooth-width-15mm-outside-diameter-26mm-sku-22411024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 20 teeth tooth width 15mm outside diameter 22mm SKU: 22411020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-20-teeth-tooth-width-15mm-outside-diameter-22mm-sku-22411020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 18 teeth tooth width 15mm outside diameter 20mm SKU: 22411018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-18-teeth-tooth-width-15mm-outside-diameter-20mm-sku-22411018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 100 teeth tooth width 16mm outside diameter 204mm SKU: 23110000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-100-teeth-tooth-width-16mm-outside-diameter-204mm-sku-23110000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 95 teeth tooth width 16mm outside diameter 194mm SKU: 23109500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-95-teeth-tooth-width-16mm-outside-diameter-194mm-sku-23109500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 90 teeth tooth width 16mm outside diameter 184mm SKU: 23109000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-90-teeth-tooth-width-16mm-outside-diameter-184mm-sku-23109000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 85 teeth tooth width 16mm outside diameter 174mm SKU: 23108500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-85-teeth-tooth-width-16mm-outside-diameter-174mm-sku-23108500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 80 teeth tooth width 16mm outside diameter 164mm SKU: 23108000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-80-teeth-tooth-width-16mm-outside-diameter-164mm-sku-23108000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 78 teeth tooth width 16mm outside diameter 160mm SKU: 23107800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-78-teeth-tooth-width-16mm-outside-diameter-160mm-sku-23107800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 76 teeth tooth width 16mm outside diameter 156mm SKU: 23107600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-76-teeth-tooth-width-16mm-outside-diameter-156mm-sku-23107600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 75 teeth tooth width 16mm outside diameter 154mm SKU: 23107500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-75-teeth-tooth-width-16mm-outside-diameter-154mm-sku-23107500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 74 teeth tooth width 16mm outside diameter 152mm SKU: 23107400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-74-teeth-tooth-width-16mm-outside-diameter-152mm-sku-23107400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 72 teeth tooth width 16mm outside diameter 148mm SKU: 23107200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-72-teeth-tooth-width-16mm-outside-diameter-148mm-sku-23107200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 70 teeth tooth width 16mm outside diameter 144mm SKU: 23107000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-70-teeth-tooth-width-16mm-outside-diameter-144mm-sku-23107000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 68 teeth tooth width 16mm outside diameter 140mm SKU: 23106800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-68-teeth-tooth-width-16mm-outside-diameter-140mm-sku-23106800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 67 teeth tooth width 16mm outside diameter 138mm SKU: 23106700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-67-teeth-tooth-width-16mm-outside-diameter-138mm-sku-23106700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 65 teeth tooth width 16mm outside diameter 134mm SKU: 23106500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-65-teeth-tooth-width-16mm-outside-diameter-134mm-sku-23106500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 64 teeth tooth width 16mm outside diameter 132mm SKU: 23106400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-64-teeth-tooth-width-16mm-outside-diameter-132mm-sku-23106400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 63 teeth tooth width 16mm outside diameter 130mm SKU: 23106300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-63-teeth-tooth-width-16mm-outside-diameter-130mm-sku-23106300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 62 teeth tooth width 16mm outside diameter 128mm SKU: 23106200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-62-teeth-tooth-width-16mm-outside-diameter-128mm-sku-23106200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 60 teeth tooth width 16mm outside diameter 124mm SKU: 23106000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-60-teeth-tooth-width-16mm-outside-diameter-124mm-sku-23106000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 59 teeth tooth width 16mm outside diameter 122mm SKU: 23105900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-59-teeth-tooth-width-16mm-outside-diameter-122mm-sku-23105900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 58 teeth tooth width 16mm outside diameter 120mm SKU: 23105800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-58-teeth-tooth-width-16mm-outside-diameter-120mm-sku-23105800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 57 teeth tooth width 16mm outside diameter 118mm SKU: 23105700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-57-teeth-tooth-width-16mm-outside-diameter-118mm-sku-23105700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 56 teeth tooth width 16mm outside diameter 116mm SKU: 23105600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-56-teeth-tooth-width-16mm-outside-diameter-116mm-sku-23105600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 55 teeth tooth width 16mm outside diameter 114mm SKU: 23105500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-55-teeth-tooth-width-16mm-outside-diameter-114mm-sku-23105500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 54 teeth tooth width 16mm outside diameter 112mm SKU: 23105400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-54-teeth-tooth-width-16mm-outside-diameter-112mm-sku-23105400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 53 teeth tooth width 16mm outside diameter 110mm SKU: 23105300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-53-teeth-tooth-width-16mm-outside-diameter-110mm-sku-23105300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 52 teeth tooth width 16mm outside diameter 108mm SKU: 23105200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-52-teeth-tooth-width-16mm-outside-diameter-108mm-sku-23105200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 50 teeth tooth width 16mm outside diameter 104mm SKU: 23105000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-50-teeth-tooth-width-16mm-outside-diameter-104mm-sku-23105000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 48 teeth tooth width 16mm outside diameter 100mm SKU: 23104800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-48-teeth-tooth-width-16mm-outside-diameter-100mm-sku-23104800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 47 teeth tooth width 16mm outside diameter 98mm SKU: 23104700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-47-teeth-tooth-width-16mm-outside-diameter-98mm-sku-23104700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 46 teeth tooth width 16mm outside diameter 96mm SKU: 23104600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-46-teeth-tooth-width-16mm-outside-diameter-96mm-sku-23104600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 45 teeth tooth width 16mm outside diameter 94mm SKU: 23104500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-45-teeth-tooth-width-16mm-outside-diameter-94mm-sku-23104500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 44 teeth tooth width 16mm outside diameter 92mm SKU: 23104400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-44-teeth-tooth-width-16mm-outside-diameter-92mm-sku-23104400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 42 teeth tooth width 16mm outside diameter 88mm SKU: 23104200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-42-teeth-tooth-width-16mm-outside-diameter-88mm-sku-23104200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 40 teeth tooth width 16mm outside diameter 84mm SKU: 23104000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-40-teeth-tooth-width-16mm-outside-diameter-84mm-sku-23104000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 38 teeth tooth width 16mm outside diameter 40mm SKU: 23103800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-38-teeth-tooth-width-16mm-outside-diameter-40mm-sku-23103800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 37 teeth tooth width 16mm outside diameter 78mm SKU: 23103700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-37-teeth-tooth-width-16mm-outside-diameter-78mm-sku-23103700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 36 teeth tooth width 16mm outside diameter 76mm SKU: 23103600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-36-teeth-tooth-width-16mm-outside-diameter-76mm-sku-23103600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 35 teeth tooth width 16mm outside diameter 74mm SKU: 23103500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-35-teeth-tooth-width-16mm-outside-diameter-74mm-sku-23103500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 34 teeth tooth width 16mm outside diameter 72mm SKU: 23103400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-34-teeth-tooth-width-16mm-outside-diameter-72mm-sku-23103400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 32 teeth tooth width 16mm outside diameter 68mm SKU: 23103200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-32-teeth-tooth-width-16mm-outside-diameter-68mm-sku-23103200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 31 teeth tooth width 16mm outside diameter 66mm SKU: 23103100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-31-teeth-tooth-width-16mm-outside-diameter-66mm-sku-23103100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 30 teeth tooth width 16mm outside diameter 64mm SKU: 23103000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-30-teeth-tooth-width-16mm-outside-diameter-64mm-sku-23103000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 29 teeth tooth width 16mm outside diameter 62mm SKU: 23102900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-29-teeth-tooth-width-16mm-outside-diameter-62mm-sku-23102900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 28 teeth tooth width 16mm outside diameter 60mm SKU: 23102800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-28-teeth-tooth-width-16mm-outside-diameter-60mm-sku-23102800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 27 teeth tooth width 16mm outside diameter 58mm SKU: 23102700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-27-teeth-tooth-width-16mm-outside-diameter-58mm-sku-23102700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 26 teeth tooth width 16mm outside diameter 56mm SKU: 23102600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-26-teeth-tooth-width-16mm-outside-diameter-56mm-sku-23102600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 25 teeth tooth width 16mm outside diameter 54mm SKU: 23102500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-25-teeth-tooth-width-16mm-outside-diameter-54mm-sku-23102500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 24 teeth tooth width 16mm outside diameter 52mm SKU: 23102400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-24-teeth-tooth-width-16mm-outside-diameter-52mm-sku-23102400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 23 teeth tooth width 16mm outside diameter 50mm SKU: 23102300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-23-teeth-tooth-width-16mm-outside-diameter-50mm-sku-23102300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 22 teeth tooth width 16mm outside diameter 48mm SKU: 23102200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-22-teeth-tooth-width-16mm-outside-diameter-48mm-sku-23102200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 21 teeth tooth width 16mm outside diameter 46mm SKU: 23102100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-21-teeth-tooth-width-16mm-outside-diameter-46mm-sku-23102100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 20 teeth tooth width 16mm outside diameter 44mm SKU: 23102000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-20-teeth-tooth-width-16mm-outside-diameter-44mm-sku-23102000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 19 teeth tooth width 16mm outside diameter 42mm SKU: 23101900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-19-teeth-tooth-width-16mm-outside-diameter-42mm-sku-23101900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 18 teeth tooth width 16mm outside diameter 40mm SKU: 23101800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-18-teeth-tooth-width-16mm-outside-diameter-40mm-sku-23101800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 17 teeth tooth width 16mm outside diameter 38mm SKU: 23101700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-17-teeth-tooth-width-16mm-outside-diameter-38mm-sku-23101700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 16 teeth tooth width 16mm outside diameter 36mm SKU: 23101600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-16-teeth-tooth-width-16mm-outside-diameter-36mm-sku-23101600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 15 teeth tooth width 16mm outside diameter 34mm SKU: 23101500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-15-teeth-tooth-width-16mm-outside-diameter-34mm-sku-23101500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 14 teeth tooth width 16mm outside diameter 32mm SKU: 23101400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-14-teeth-tooth-width-16mm-outside-diameter-32mm-sku-23101400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 13 teeth tooth width 16mm outside diameter 30mm SKU: 23101300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-13-teeth-tooth-width-16mm-outside-diameter-30mm-sku-23101300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 12 teeth tooth width 16mm outside diameter 28mm SKU: 23101200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-12-teeth-tooth-width-16mm-outside-diameter-28mm-sku-23101200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 10 teeth tooth width 16mm outside diameter 24mm SKU: 23101000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-10-teeth-tooth-width-16mm-outside-diameter-24mm-sku-23101000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 120 teeth tooth width 15mm outside diameter 183mm SKU: 22812000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-120-teeth-tooth-width-15mm-outside-diameter-183mm-sku-22812000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 114 teeth tooth width 15mm outside diameter 174mm SKU: 22811400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-114-teeth-tooth-width-15mm-outside-diameter-174mm-sku-22811400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 127 teeth tooth width 17mm outside diameter 193.5mm SKU: 22811127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-127-teeth-tooth-width-17mm-outside-diameter-193-5mm-sku-22811127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 22811120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-22811120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 114 teeth tooth width 17mm outside diameter 174mm SKU: 22811114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-114-teeth-tooth-width-17mm-outside-diameter-174mm-sku-22811114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 110 teeth tooth width 17mm outside diameter 168mm SKU: 22811110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-110-teeth-tooth-width-17mm-outside-diameter-168mm-sku-22811110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 100 teeth tooth width 17mm outside diameter 153mm SKU: 22811100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-100-teeth-tooth-width-17mm-outside-diameter-153mm-sku-22811100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 95 teeth tooth width 17mm outside diameter 145.5mm SKU: 22811095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-95-teeth-tooth-width-17mm-outside-diameter-145-5mm-sku-22811095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 90 teeth tooth width 17mm outside diameter 138mm SKU: 22811090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-90-teeth-tooth-width-17mm-outside-diameter-138mm-sku-22811090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 85 teeth tooth width 17mm outside diameter 130.5mm SKU: 22811085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-85-teeth-tooth-width-17mm-outside-diameter-130-5mm-sku-22811085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 22811080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-22811080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 76 teeth tooth width 17mm outside diameter 117mm SKU: 22811076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-76-teeth-tooth-width-17mm-outside-diameter-117mm-sku-22811076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 75 teeth tooth width 17mm outside diameter 115.5mm SKU: 22811075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-75-teeth-tooth-width-17mm-outside-diameter-115-5mm-sku-22811075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 72 teeth tooth width 17mm outside diameter 111mm SKU: 22811072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-72-teeth-tooth-width-17mm-outside-diameter-111mm-sku-22811072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 22811060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-22811060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 22811050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-22811050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 22811048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-22811048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 22811045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-22811045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 22811040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-22811040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 22811036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-22811036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 35 teeth tooth width 17mm outside diameter 55.5mm SKU: 22811035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-35-teeth-tooth-width-17mm-outside-diameter-55-5mm-sku-22811035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 22811030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-22811030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 22811025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-22811025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 24 teeth tooth width 17mm outside diameter 39mm SKU: 22811024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-24-teeth-tooth-width-17mm-outside-diameter-39mm-sku-22811024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 20 teeth tooth width 17mm outside diameter 33mm SKU: 22811020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-20-teeth-tooth-width-17mm-outside-diameter-33mm-sku-22811020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 18 teeth tooth width 17mm outside diameter 30mm SKU: 22811018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-18-teeth-tooth-width-17mm-outside-diameter-30mm-sku-22811018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 110 teeth tooth width 15mm outside diameter 168mm SKU: 22811000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-110-teeth-tooth-width-15mm-outside-diameter-168mm-sku-22811000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 100 teeth tooth width 15mm outside diameter 153mm SKU: 22810000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-100-teeth-tooth-width-15mm-outside-diameter-153mm-sku-22810000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 96 teeth tooth width 15mm outside diameter 147mm SKU: 22809600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-96-teeth-tooth-width-15mm-outside-diameter-147mm-sku-22809600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 95 teeth tooth width 15mm outside diameter 145.5mm SKU: 22809500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-95-teeth-tooth-width-15mm-outside-diameter-145-5mm-sku-22809500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 90 teeth tooth width 15mm outside diameter 138mm SKU: 22809000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-90-teeth-tooth-width-15mm-outside-diameter-138mm-sku-22809000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 88 teeth tooth width 15mm outside diameter 135mm SKU: 22808800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-88-teeth-tooth-width-15mm-outside-diameter-135mm-sku-22808800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 85 teeth tooth width 15mm outside diameter 130.5mm SKU: 22808500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-85-teeth-tooth-width-15mm-outside-diameter-130-5mm-sku-22808500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 80 teeth tooth width 15mm outside diameter 123mm SKU: 22808000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-123mm-sku-22808000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 76 teeth tooth width 15mm outside diameter 117mm SKU: 22807600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-76-teeth-tooth-width-15mm-outside-diameter-117mm-sku-22807600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 75 teeth tooth width 15mm outside diameter 115.5mm SKU: 22807500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-75-teeth-tooth-width-15mm-outside-diameter-115-5mm-sku-22807500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 72 teeth tooth width 15mm outside diameter 111mm SKU: 22807200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-72-teeth-tooth-width-15mm-outside-diameter-111mm-sku-22807200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 70 teeth tooth width 15mm outside diameter 108mm SKU: 22807000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-108mm-sku-22807000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 67 teeth tooth width 15mm outside diameter 103.5mm SKU: 22806700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-67-teeth-tooth-width-15mm-outside-diameter-103-5mm-sku-22806700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 56 teeth tooth width 20mm outside diameter 145mm SKU: 23205600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-56-teeth-tooth-width-20mm-outside-diameter-145mm-sku-23205600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 55 teeth tooth width 20mm outside diameter 142.5mm SKU: 23205500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-55-teeth-tooth-width-20mm-outside-diameter-142-5mm-sku-23205500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 54 teeth tooth width 20mm outside diameter 140mm SKU: 23205400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-54-teeth-tooth-width-20mm-outside-diameter-140mm-sku-23205400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 52 teeth tooth width 20mm outside diameter 135mm SKU: 23205200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-52-teeth-tooth-width-20mm-outside-diameter-135mm-sku-23205200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 50 teeth tooth width 20mm outside diameter 130mm SKU: 23205000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-50-teeth-tooth-width-20mm-outside-diameter-130mm-sku-23205000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 48 teeth tooth width 20mm outside diameter 125mm SKU: 23204800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-48-teeth-tooth-width-20mm-outside-diameter-125mm-sku-23204800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 46 teeth tooth width 20mm outside diameter 120mm SKU: 23204600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-46-teeth-tooth-width-20mm-outside-diameter-120mm-sku-23204600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 45 teeth tooth width 20mm outside diameter 117.5mm SKU: 23204500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-45-teeth-tooth-width-20mm-outside-diameter-117-5mm-sku-23204500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 42 teeth tooth width 20mm outside diameter 110mm SKU: 23204200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-42-teeth-tooth-width-20mm-outside-diameter-110mm-sku-23204200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 40 teeth tooth width 20mm outside diameter 105mm SKU: 23204000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-40-teeth-tooth-width-20mm-outside-diameter-105mm-sku-23204000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 38 teeth tooth width 20mm outside diameter 100mm SKU: 23203800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-38-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23203800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 36 teeth tooth width 20mm outside diameter 95mm SKU: 23203600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-36-teeth-tooth-width-20mm-outside-diameter-95mm-sku-23203600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 35 teeth tooth width 20mm outside diameter 92.5mm SKU: 23203500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-35-teeth-tooth-width-20mm-outside-diameter-92-5mm-sku-23203500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 34 teeth tooth width 20mm outside diameter 90mm SKU: 23203400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-34-teeth-tooth-width-20mm-outside-diameter-90mm-sku-23203400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 32 teeth tooth width 20mm outside diameter 85mm SKU: 23203200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-32-teeth-tooth-width-20mm-outside-diameter-85mm-sku-23203200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 30 teeth tooth width 20mm outside diameter 80mm SKU: 23203000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-30-teeth-tooth-width-20mm-outside-diameter-80mm-sku-23203000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 28 teeth tooth width 20mm outside diameter 75mm SKU: 23202800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-28-teeth-tooth-width-20mm-outside-diameter-75mm-sku-23202800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 27 teeth tooth width 20mm outside diameter 72.5mm SKU: 23202700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-27-teeth-tooth-width-20mm-outside-diameter-72-5mm-sku-23202700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 26 teeth tooth width 20mm outside diameter 70mm SKU: 23202600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-26-teeth-tooth-width-20mm-outside-diameter-70mm-sku-23202600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm SKU: 23202500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-25-teeth-tooth-width-20mm-outside-diameter-67-5mm-sku-23202500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 24 teeth tooth width 20mm outside diameter 65mm SKU: 23202400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-24-teeth-tooth-width-20mm-outside-diameter-65mm-sku-23202400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 23 teeth tooth width 20mm outside diameter 62.5mm SKU: 23202300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-23-teeth-tooth-width-20mm-outside-diameter-62-5mm-sku-23202300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 22 teeth tooth width 20mm outside diameter 60mm SKU: 23202200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-22-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23202200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 21 teeth tooth width 20mm outside diameter 57.5mm SKU: 23202100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-21-teeth-tooth-width-20mm-outside-diameter-57-5mm-sku-23202100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 20 teeth tooth width 20mm outside diameter 55mm SKU: 23202000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-20-teeth-tooth-width-20mm-outside-diameter-55mm-sku-23202000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 19 teeth tooth width 20mm outside diameter 52.5mm SKU: 23201900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-19-teeth-tooth-width-20mm-outside-diameter-52-5mm-sku-23201900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 18 teeth tooth width 20mm outside diameter 50mm SKU: 23201800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-18-teeth-tooth-width-20mm-outside-diameter-50mm-sku-23201800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 17 teeth tooth width 20mm outside diameter 47.5mm SKU: 23201700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-17-teeth-tooth-width-20mm-outside-diameter-47-5mm-sku-23201700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 16 teeth tooth width 20mm outside diameter 45mm SKU: 23201600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-16-teeth-tooth-width-20mm-outside-diameter-45mm-sku-23201600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 15 teeth tooth width 20mm outside diameter 42.5mm SKU: 23201500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-15-teeth-tooth-width-20mm-outside-diameter-42-5mm-sku-23201500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 14 teeth tooth width 20mm outside diameter 40mm SKU: 23201400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-14-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23201400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 13 teeth tooth width 20mm outside diameter 37.5mm SKU: 23201300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-13-teeth-tooth-width-20mm-outside-diameter-37-5mm-sku-23201300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 20mm outside diameter 35mm SKU: 23201200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-12-teeth-tooth-width-20mm-outside-diameter-35mm-sku-23201200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 120 teeth tooth width 16mm outside diameter 244mm SKU: 23112000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-120-teeth-tooth-width-16mm-outside-diameter-244mm-sku-23112000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 114 teeth tooth width 16mm outside diameter 232mm SKU: 23111400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-114-teeth-tooth-width-16mm-outside-diameter-232mm-sku-23111400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 120 teeth tooth width 20mm outside diameter 244mm SKU: 23111120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-120-teeth-tooth-width-20mm-outside-diameter-244mm-sku-23111120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 100 teeth tooth width 20mm outside diameter 204mm SKU: 23111100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-100-teeth-tooth-width-20mm-outside-diameter-204mm-sku-23111100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 90 teeth tooth width 20mm outside diameter 184mm SKU: 23111090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-90-teeth-tooth-width-20mm-outside-diameter-184mm-sku-23111090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23111080](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23111080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 75 teeth tooth width 20mm outside diameter 154mm SKU: 23111075](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-75-teeth-tooth-width-20mm-outside-diameter-154mm-sku-23111075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 70 teeth tooth width 20mm outside diameter 144mm SKU: 23111070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-70-teeth-tooth-width-20mm-outside-diameter-144mm-sku-23111070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 69 teeth tooth width 20mm outside diameter 142mm SKU: 23111069](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-69-teeth-tooth-width-20mm-outside-diameter-142mm-sku-23111069/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 68 teeth tooth width 20mm outside diameter 140mm SKU: 23111068](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-68-teeth-tooth-width-20mm-outside-diameter-140mm-sku-23111068/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 67 teeth tooth width 20mm outside diameter 138mm SKU: 23111067](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-67-teeth-tooth-width-20mm-outside-diameter-138mm-sku-23111067/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 66 teeth tooth width 20mm outside diameter 136mm SKU: 23111066](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-66-teeth-tooth-width-20mm-outside-diameter-136mm-sku-23111066/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 65 teeth tooth width 20mm outside diameter 134mm SKU: 23111065](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-65-teeth-tooth-width-20mm-outside-diameter-134mm-sku-23111065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 64 teeth tooth width 20mm outside diameter 132mm SKU: 23111064](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-64-teeth-tooth-width-20mm-outside-diameter-132mm-sku-23111064/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 63 teeth tooth width 20mm outside diameter 130mm SKU: 23111063](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-63-teeth-tooth-width-20mm-outside-diameter-130mm-sku-23111063/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 62 teeth tooth width 20mm outside diameter 128mm SKU: 23111062](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-62-teeth-tooth-width-20mm-outside-diameter-128mm-sku-23111062/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 61 teeth tooth width 20mm outside diameter 126mm SKU: 23111061](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-61-teeth-tooth-width-20mm-outside-diameter-126mm-sku-23111061/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23111060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23111060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 59 teeth tooth width 20mm outside diameter 122mm SKU: 23111059](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-59-teeth-tooth-width-20mm-outside-diameter-122mm-sku-23111059/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 58 teeth tooth width 20mm outside diameter 120mm SKU: 23111058](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-58-teeth-tooth-width-20mm-outside-diameter-120mm-sku-23111058/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 57 teeth tooth width 20mm outside diameter 118mm SKU: 23111057](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-57-teeth-tooth-width-20mm-outside-diameter-118mm-sku-23111057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 56 teeth tooth width 20mm outside diameter 116mm SKU: 23111056](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-56-teeth-tooth-width-20mm-outside-diameter-116mm-sku-23111056/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 55 teeth tooth width 20mm outside diameter 114mm SKU: 23111055](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-55-teeth-tooth-width-20mm-outside-diameter-114mm-sku-23111055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 54 teeth tooth width 20mm outside diameter 112mm SKU: 23111054](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-54-teeth-tooth-width-20mm-outside-diameter-112mm-sku-23111054/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 53 teeth tooth width 20mm outside diameter 110mm SKU: 23111053](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-53-teeth-tooth-width-20mm-outside-diameter-110mm-sku-23111053/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 52 teeth tooth width 20mm outside diameter 108mm SKU: 23111052](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-52-teeth-tooth-width-20mm-outside-diameter-108mm-sku-23111052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 51 teeth tooth width 20mm outside diameter 106mm SKU: 23111051](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-51-teeth-tooth-width-20mm-outside-diameter-106mm-sku-23111051/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23111050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23111050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 49 teeth tooth width 20mm outside diameter 102mm SKU: 23111049](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-49-teeth-tooth-width-20mm-outside-diameter-102mm-sku-23111049/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 23111048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23111048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 47 teeth tooth width 20mm outside diameter 98mm SKU: 23111047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-47-teeth-tooth-width-20mm-outside-diameter-98mm-sku-23111047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 46 teeth tooth width 20mm outside diameter 96mm SKU: 23111046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-46-teeth-tooth-width-20mm-outside-diameter-96mm-sku-23111046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23111045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23111045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 44 teeth tooth width 20mm outside diameter 92mm SKU: 23111044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-44-teeth-tooth-width-20mm-outside-diameter-92mm-sku-23111044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 43 teeth tooth width 20mm outside diameter 90mm SKU: 23111043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-43-teeth-tooth-width-20mm-outside-diameter-90mm-sku-23111043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 42 teeth tooth width 20mm outside diameter 88mm SKU: 23111042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-42-teeth-tooth-width-20mm-outside-diameter-88mm-sku-23111042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 41 teeth tooth width 20mm outside diameter 86mm SKU: 23111041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-41-teeth-tooth-width-20mm-outside-diameter-86mm-sku-23111041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23111040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23111040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 39 teeth tooth width 20mm outside diameter 82mm SKU: 23111039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-39-teeth-tooth-width-20mm-outside-diameter-82mm-sku-23111039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 38 teeth tooth width 20mm outside diameter 80mm SKU: 23111038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-38-teeth-tooth-width-20mm-outside-diameter-80mm-sku-23111038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 37 teeth tooth width 20mm outside diameter 78mm SKU: 23111037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-37-teeth-tooth-width-20mm-outside-diameter-78mm-sku-23111037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23111036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23111036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23111035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23111035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 34 teeth tooth width 20mm outside diameter 72mm SKU: 23111034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-34-teeth-tooth-width-20mm-outside-diameter-72mm-sku-23111034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 33 teeth tooth width 20mm outside diameter 70mm SKU: 23111033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-33-teeth-tooth-width-20mm-outside-diameter-70mm-sku-23111033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23111032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23111032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 31 teeth tooth width 20mm outside diameter 66mm SKU: 23111031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-31-teeth-tooth-width-20mm-outside-diameter-66mm-sku-23111031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23111030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23111030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 29 teeth tooth width 20mm outside diameter 62mm SKU: 23111029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-29-teeth-tooth-width-20mm-outside-diameter-62mm-sku-23111029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23111028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23111028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 27 teeth tooth width 20mm outside diameter 58mm SKU: 23111027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-27-teeth-tooth-width-20mm-outside-diameter-58mm-sku-23111027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 26 teeth tooth width 20mm outside diameter 56mm SKU: 23111026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-26-teeth-tooth-width-20mm-outside-diameter-56mm-sku-23111026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23111025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23111025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23111024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23111024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 23 teeth tooth width 20mm outside diameter 50mm SKU: 23111023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-23-teeth-tooth-width-20mm-outside-diameter-50mm-sku-23111023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 22 teeth tooth width 20mm outside diameter 48mm SKU: 23111022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-22-teeth-tooth-width-20mm-outside-diameter-48mm-sku-23111022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 21 teeth tooth width 20mm outside diameter 46mm SKU: 23111021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-21-teeth-tooth-width-20mm-outside-diameter-46mm-sku-23111021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23111020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23111020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 19 teeth tooth width 20mm outside diameter 42mm SKU: 23111019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-19-teeth-tooth-width-20mm-outside-diameter-42mm-sku-23111019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23111018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23111018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 17 teeth tooth width 20mm outside diameter 38mm SKU: 23111017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-17-teeth-tooth-width-20mm-outside-diameter-38mm-sku-23111017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 16 teeth tooth width 20mm outside diameter 36mm SKU: 23111016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-16-teeth-tooth-width-20mm-outside-diameter-36mm-sku-23111016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 15 teeth tooth width 20mm outside diameter 34mm SKU: 23111015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-15-teeth-tooth-width-20mm-outside-diameter-34mm-sku-23111015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 14 teeth tooth width 20mm outside diameter 32mm SKU: 23111014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-14-teeth-tooth-width-20mm-outside-diameter-32mm-sku-23111014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 13 teeth tooth width 20mm outside diameter 30mm SKU: 23111013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-13-teeth-tooth-width-20mm-outside-diameter-30mm-sku-23111013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 12 teeth tooth width 20mm outside diameter 28mm SKU: 23111012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-12-teeth-tooth-width-20mm-outside-diameter-28mm-sku-23111012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 110 teeth tooth width 16mm outside diameter 224mm SKU: 23111000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-110-teeth-tooth-width-16mm-outside-diameter-224mm-sku-23111000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 57 teeth tooth width 25mm outside diameter 177mm SKU: 23305700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-57-teeth-tooth-width-25mm-outside-diameter-177mm-sku-23305700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 56 teeth tooth width 25mm outside diameter 174mm SKU: 23305600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-56-teeth-tooth-width-25mm-outside-diameter-174mm-sku-23305600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 55 teeth tooth width 25mm outside diameter 171mm SKU: 23305500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-55-teeth-tooth-width-25mm-outside-diameter-171mm-sku-23305500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 54 teeth tooth width 25mm outside diameter 168mm SKU: 23305400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-54-teeth-tooth-width-25mm-outside-diameter-168mm-sku-23305400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 52 teeth tooth width 25mm outside diameter 162mm SKU: 23305200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-52-teeth-tooth-width-25mm-outside-diameter-162mm-sku-23305200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 50 teeth tooth width 25mm outside diameter 156mm SKU: 23305000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-50-teeth-tooth-width-25mm-outside-diameter-156mm-sku-23305000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 48 teeth tooth width 25mm outside diameter 150mm SKU: 23304800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-48-teeth-tooth-width-25mm-outside-diameter-150mm-sku-23304800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 45 teeth tooth width 25mm outside diameter 141mm SKU: 23304500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-45-teeth-tooth-width-25mm-outside-diameter-141mm-sku-23304500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 42 teeth tooth width 25mm outside diameter 132mm SKU: 23304200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-42-teeth-tooth-width-25mm-outside-diameter-132mm-sku-23304200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 40 teeth tooth width 25mm outside diameter 126mm SKU: 23304000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-40-teeth-tooth-width-25mm-outside-diameter-126mm-sku-23304000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 38 teeth tooth width 25mm outside diameter 120mm SKU: 23303800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-38-teeth-tooth-width-25mm-outside-diameter-120mm-sku-23303800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 36 teeth tooth width 25mm outside diameter 114mm SKU: 23303600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-36-teeth-tooth-width-25mm-outside-diameter-114mm-sku-23303600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 35 teeth tooth width 25mm outside diameter 111mm SKU: 23303500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-35-teeth-tooth-width-25mm-outside-diameter-111mm-sku-23303500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 32 teeth tooth width 25mm outside diameter 102mm SKU: 23303200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-32-teeth-tooth-width-25mm-outside-diameter-102mm-sku-23303200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 30 teeth tooth width 25mm outside diameter 96mm SKU: 23303000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-30-teeth-tooth-width-25mm-outside-diameter-96mm-sku-23303000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 28 teeth tooth width 25mm outside diameter 90mm SKU: 23302800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-28-teeth-tooth-width-25mm-outside-diameter-90mm-sku-23302800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 27 teeth tooth width 25mm outside diameter 87mm SKU: 23302700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-27-teeth-tooth-width-25mm-outside-diameter-87mm-sku-23302700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 26 teeth tooth width 25mm outside diameter 84mm SKU: 23302600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-26-teeth-tooth-width-25mm-outside-diameter-84mm-sku-23302600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 25 teeth tooth width 25mm outside diameter 81mm SKU: 23302500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-25-teeth-tooth-width-25mm-outside-diameter-81mm-sku-23302500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 24 teeth tooth width 25mm outside diameter 78mm SKU: 23302400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-24-teeth-tooth-width-25mm-outside-diameter-78mm-sku-23302400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 23 teeth tooth width 25mm outside diameter 75mm SKU: 23302300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-23-teeth-tooth-width-25mm-outside-diameter-75mm-sku-23302300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 22 teeth tooth width 25mm outside diameter 72mm SKU: 23302200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-22-teeth-tooth-width-25mm-outside-diameter-72mm-sku-23302200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 21 teeth tooth width 25mm outside diameter 69mm SKU: 23302100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-21-teeth-tooth-width-25mm-outside-diameter-69mm-sku-23302100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 20 teeth tooth width 25mm outside diameter 66mm SKU: 23302000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-20-teeth-tooth-width-25mm-outside-diameter-66mm-sku-23302000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 19 teeth tooth width 25mm outside diameter 63mm SKU: 23301900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-19-teeth-tooth-width-25mm-outside-diameter-63mm-sku-23301900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 18 teeth tooth width 25mm outside diameter 60mm SKU: 23301800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-teeth-tooth-width-25mm-outside-diameter-60mm-sku-23301800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 17 teeth tooth width 25mm outside diameter 57mm SKU: 23301700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-17-teeth-tooth-width-25mm-outside-diameter-57mm-sku-23301700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 16 teeth tooth width 25mm outside diameter 54mm SKU: 23301600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-16-teeth-tooth-width-25mm-outside-diameter-54mm-sku-23301600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 15 teeth tooth width 25mm outside diameter 51mm SKU: 23301500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-15-teeth-tooth-width-25mm-outside-diameter-51mm-sku-23301500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 14 teeth tooth width 25mm outside diameter 48mm SKU: 23301400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-14-teeth-tooth-width-25mm-outside-diameter-48mm-sku-23301400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 13 teeth tooth width 25mm outside diameter 45mm SKU: 23301300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-13-teeth-tooth-width-25mm-outside-diameter-45mm-sku-23301300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 12 teeth tooth width 25mm outside diameter 42mm SKU: 23301200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-12-teeth-tooth-width-25mm-outside-diameter-42mm-sku-23301200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 127 teeth tooth width 20mm outside diameter 322.5mm SKU: 23212700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-127-teeth-tooth-width-20mm-outside-diameter-322-5mm-sku-23212700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 120 teeth tooth width 20mm outside diameter 305mm SKU: 23212000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-120-teeth-tooth-width-20mm-outside-diameter-305mm-sku-23212000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 120 teeth tooth width 25mm outside diameter 305mm SKU: 23211120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-120-teeth-tooth-width-25mm-outside-diameter-305mm-sku-23211120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 100 teeth tooth width 25mm outside diameter 255mm SKU: 23211100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-100-teeth-tooth-width-25mm-outside-diameter-255mm-sku-23211100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 90 teeth tooth width 25mm outside diameter 230mm SKU: 23211090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-90-teeth-tooth-width-25mm-outside-diameter-230mm-sku-23211090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 70 teeth tooth width 25mm outside diameter 180mm SKU: 23211070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-70-teeth-tooth-width-25mm-outside-diameter-180mm-sku-23211070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 23211060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-23211060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 59 teeth tooth width 25mm outside diameter 152.5mm SKU: 23211059](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-59-teeth-tooth-width-25mm-outside-diameter-152-5mm-sku-23211059/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 58 teeth tooth width 25mm outside diameter 150mm SKU: 23211058](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-58-teeth-tooth-width-25mm-outside-diameter-150mm-sku-23211058/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 57 teeth tooth width 25mm outside diameter 147.5mm SKU: 23211057](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-57-teeth-tooth-width-25mm-outside-diameter-147-5mm-sku-23211057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 56 teeth tooth width 25mm outside diameter 145mm SKU: 23211056](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-56-teeth-tooth-width-25mm-outside-diameter-145mm-sku-23211056/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 55 teeth tooth width 25mm outside diameter 142.5mm SKU: 23211055](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-55-teeth-tooth-width-25mm-outside-diameter-142-5mm-sku-23211055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 54 teeth tooth width 25mm outside diameter 140mm SKU: 23211054](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-54-teeth-tooth-width-25mm-outside-diameter-140mm-sku-23211054/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 53 teeth tooth width 25mm outside diameter 137.5mm SKU: 23211053](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-53-teeth-tooth-width-25mm-outside-diameter-137-5mm-sku-23211053/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 52 teeth tooth width 25mm outside diameter 135mm SKU: 23211052](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-52-teeth-tooth-width-25mm-outside-diameter-135mm-sku-23211052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 51 teeth tooth width 25mm outside diameter 132.5mm SKU: 23211051](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-51-teeth-tooth-width-25mm-outside-diameter-132-5mm-sku-23211051/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 23211050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-23211050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 49 teeth tooth width 25mm outside diameter 127.5mm SKU: 23211049](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-49-teeth-tooth-width-25mm-outside-diameter-127-5mm-sku-23211049/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 23211048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-23211048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 47 teeth tooth width 25mm outside diameter 122.5mm SKU: 23211047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-47-teeth-tooth-width-25mm-outside-diameter-122-5mm-sku-23211047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 46 teeth tooth width 25mm outside diameter 120mm SKU: 23211046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-46-teeth-tooth-width-25mm-outside-diameter-120mm-sku-23211046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 45 teeth tooth width 25mm outside diameter 117.5mm SKU: 23211045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-45-teeth-tooth-width-25mm-outside-diameter-117-5mm-sku-23211045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 44 teeth tooth width 25mm outside diameter 115mm SKU: 23211044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-44-teeth-tooth-width-25mm-outside-diameter-115mm-sku-23211044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 43 teeth tooth width 25mm outside diameter 112.5mm SKU: 23211043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-43-teeth-tooth-width-25mm-outside-diameter-112-5mm-sku-23211043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 42 teeth tooth width 25mm outside diameter 110mm SKU: 23211042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-42-teeth-tooth-width-25mm-outside-diameter-110mm-sku-23211042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 41 teeth tooth width 25mm outside diameter 107.5mm SKU: 23211041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-41-teeth-tooth-width-25mm-outside-diameter-107-5mm-sku-23211041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23211040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23211040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 39 teeth tooth width 25mm outside diameter 102.5mm SKU: 23211039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-39-teeth-tooth-width-25mm-outside-diameter-102-5mm-sku-23211039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 38 teeth tooth width 25mm outside diameter 100mm SKU: 23211038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-38-teeth-tooth-width-25mm-outside-diameter-100mm-sku-23211038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 37 teeth tooth width 25mm outside diameter 97.5mm SKU: 23211037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-37-teeth-tooth-width-25mm-outside-diameter-97-5mm-sku-23211037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 36 teeth tooth width 25mm outside diameter 95mm SKU: 23211036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-sku-23211036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 35 teeth tooth width 25mm outside diameter 92.5mm SKU: 23211035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-35-teeth-tooth-width-25mm-outside-diameter-92-5mm-sku-23211035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 34 teeth tooth width 25mm outside diameter 90mm SKU: 23211034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-34-teeth-tooth-width-25mm-outside-diameter-90mm-sku-23211034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 33 teeth tooth width 25mm outside diameter 87.5mm SKU: 23211033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-33-teeth-tooth-width-25mm-outside-diameter-87-5mm-sku-23211033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 32 teeth tooth width 25mm outside diameter 85mm SKU: 23211032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-sku-23211032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 31 teeth tooth width 25mm outside diameter 82.5mm SKU: 23211031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-31-teeth-tooth-width-25mm-outside-diameter-82-5mm-sku-23211031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23211030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23211030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 29 teeth tooth width 25mm outside diameter 77.5mm SKU: 23211029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-29-teeth-tooth-width-25mm-outside-diameter-77-5mm-sku-23211029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 28 teeth tooth width 25mm outside diameter 75mm SKU: 23211028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-28-teeth-tooth-width-25mm-outside-diameter-75mm-sku-23211028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 27 teeth tooth width 25mm outside diameter 72.5mm SKU: 23211027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-27-teeth-tooth-width-25mm-outside-diameter-72-5mm-sku-23211027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 26 teeth tooth width 25mm outside diameter 70mm SKU: 23211026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-26-teeth-tooth-width-25mm-outside-diameter-70mm-sku-23211026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23211025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23211025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23211024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23211024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 23 teeth tooth width 25mm outside diameter 62.5mm SKU: 23211023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-23-teeth-tooth-width-25mm-outside-diameter-62-5mm-sku-23211023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 22 teeth tooth width 25mm outside diameter 60mm SKU: 23211022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-22-teeth-tooth-width-25mm-outside-diameter-60mm-sku-23211022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 21 teeth tooth width 25mm outside diameter 57.5mm SKU: 23211021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-21-teeth-tooth-width-25mm-outside-diameter-57-5mm-sku-23211021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23211020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23211020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 19 teeth tooth width 25mm outside diameter 52.5mm SKU: 23211019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-19-teeth-tooth-width-25mm-outside-diameter-52-5mm-sku-23211019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23211018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23211018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 17 teeth tooth width 25mm outside diameter 47.5mm SKU: 23211017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-17-teeth-tooth-width-25mm-outside-diameter-47-5mm-sku-23211017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 16 teeth tooth width 25mm outside diameter 45mm SKU: 23211016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-16-teeth-tooth-width-25mm-outside-diameter-45mm-sku-23211016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23211015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23211015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 14 teeth tooth width 25mm outside diameter 40mm SKU: 23211014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-14-teeth-tooth-width-25mm-outside-diameter-40mm-sku-23211014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 13 teeth tooth width 25mm outside diameter 37.5mm SKU: 23211013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-13-teeth-tooth-width-25mm-outside-diameter-37-5mm-sku-23211013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm SKU: 23211012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-12-teeth-tooth-width-25mm-outside-diameter-35mm-sku-23211012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 110 teeth tooth width 20mm outside diameter 280mm SKU: 23211000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-110-teeth-tooth-width-20mm-outside-diameter-280mm-sku-23211000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 100 teeth tooth width 20mm outside diameter 255mm SKU: 23210000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-100-teeth-tooth-width-20mm-outside-diameter-255mm-sku-23210000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 95 teeth tooth width 20mm outside diameter 242.5mm SKU: 23209500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-95-teeth-tooth-width-20mm-outside-diameter-242-5mm-sku-23209500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 90 teeth tooth width 20mm outside diameter 230mm SKU: 23209000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-90-teeth-tooth-width-20mm-outside-diameter-230mm-sku-23209000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 85 teeth tooth width 20mm outside diameter 217.5mm SKU: 23208500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-85-teeth-tooth-width-20mm-outside-diameter-217-5mm-sku-23208500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 82 teeth tooth width 20mm outside diameter 210mm SKU: 23208200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-82-teeth-tooth-width-20mm-outside-diameter-210mm-sku-23208200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 80 teeth tooth width 20mm outside diameter 205mm SKU: 23208000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-80-teeth-tooth-width-20mm-outside-diameter-205mm-sku-23208000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 75 teeth tooth width 20mm outside diameter 192.5mm SKU: 23207500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-75-teeth-tooth-width-20mm-outside-diameter-192-5mm-sku-23207500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 72 teeth tooth width 20mm outside diameter 185mm SKU: 23207200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-72-teeth-tooth-width-20mm-outside-diameter-185mm-sku-23207200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 70 teeth tooth width 20mm outside diameter 180mm SKU: 23207000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-70-teeth-tooth-width-20mm-outside-diameter-180mm-sku-23207000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 65 teeth tooth width 20mm outside diameter 167.5mm SKU: 23206500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-65-teeth-tooth-width-20mm-outside-diameter-167-5mm-sku-23206500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 62 teeth tooth width 20mm outside diameter 160mm SKU: 23206200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-62-teeth-tooth-width-20mm-outside-diameter-160mm-sku-23206200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 60 teeth tooth width 20mm outside diameter 155mm SKU: 23206000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-60-teeth-tooth-width-20mm-outside-diameter-155mm-sku-23206000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 80 teeth tooth width 30mm outside diameter 328mm SKU: 23408000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-80-teeth-tooth-width-30mm-outside-diameter-328mm-sku-23408000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 76 teeth tooth width 30mm outside diameter 312mm SKU: 23407600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-76-teeth-tooth-width-30mm-outside-diameter-312mm-sku-23407600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 75 teeth tooth width 30mm outside diameter 308mm SKU: 23407500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-75-teeth-tooth-width-30mm-outside-diameter-308mm-sku-23407500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 72 teeth tooth width 30mm outside diameter 296mm SKU: 23407200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-72-teeth-tooth-width-30mm-outside-diameter-296mm-sku-23407200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 70 teeth tooth width 30mm outside diameter 288mm SKU: 23407000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-70-teeth-tooth-width-30mm-outside-diameter-288mm-sku-23407000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 67 teeth tooth width 30mm outside diameter 276mm SKU: 23406700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-67-teeth-tooth-width-30mm-outside-diameter-276mm-sku-23406700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 65 teeth tooth width 30mm outside diameter 268mm SKU: 23406500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-65-teeth-tooth-width-30mm-outside-diameter-268mm-sku-23406500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 60 teeth tooth width 30mm outside diameter 248mm SKU: 23406000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-60-teeth-tooth-width-30mm-outside-diameter-248mm-sku-23406000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 58 teeth tooth width 30mm outside diameter 240mm SKU: 23405800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-58-teeth-tooth-width-30mm-outside-diameter-240mm-sku-23405800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 56 teeth tooth width 30mm outside diameter 232mm SKU: 23405600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-56-teeth-tooth-width-30mm-outside-diameter-232mm-sku-23405600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 55 teeth tooth width 30mm outside diameter 228mm SKU: 23405500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-55-teeth-tooth-width-30mm-outside-diameter-228mm-sku-23405500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 54 teeth tooth width 30mm outside diameter 224mm SKU: 23405400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-54-teeth-tooth-width-30mm-outside-diameter-224mm-sku-23405400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 52 teeth tooth width 30mm outside diameter 216mm SKU: 23405200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-52-teeth-tooth-width-30mm-outside-diameter-216mm-sku-23405200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 50 teeth tooth width 30mm outside diameter 208mm SKU: 23405000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-50-teeth-tooth-width-30mm-outside-diameter-208mm-sku-23405000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 48 teeth tooth width 30mm outside diameter 200mm SKU: 23404800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-48-teeth-tooth-width-30mm-outside-diameter-200mm-sku-23404800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 46 teeth tooth width 30mm outside diameter 192mm SKU: 23404600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-46-teeth-tooth-width-30mm-outside-diameter-192mm-sku-23404600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 45 teeth tooth width 30mm outside diameter 188mm SKU: 23404500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-45-teeth-tooth-width-30mm-outside-diameter-188mm-sku-23404500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 44 teeth tooth width 30mm outside diameter 184mm SKU: 23404400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-44-teeth-tooth-width-30mm-outside-diameter-184mm-sku-23404400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 42 teeth tooth width 30mm outside diameter 176mm SKU: 23404200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-42-teeth-tooth-width-30mm-outside-diameter-176mm-sku-23404200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 40 teeth tooth width 30mm outside diameter 168mm SKU: 23404000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-40-teeth-tooth-width-30mm-outside-diameter-168mm-sku-23404000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 38 teeth tooth width 30mm outside diameter 160mm SKU: 23403800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-38-teeth-tooth-width-30mm-outside-diameter-160mm-sku-23403800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 36 teeth tooth width 30mm outside diameter 152mm SKU: 23403600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-36-teeth-tooth-width-30mm-outside-diameter-152mm-sku-23403600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 35 teeth tooth width 30mm outside diameter 148mm SKU: 23403500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-35-teeth-tooth-width-30mm-outside-diameter-148mm-sku-23403500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 32 teeth tooth width 30mm outside diameter 136mm SKU: 23403200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-32-teeth-tooth-width-30mm-outside-diameter-136mm-sku-23403200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 30 teeth tooth width 30mm outside diameter 128mm SKU: 23403000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-30-teeth-tooth-width-30mm-outside-diameter-128mm-sku-23403000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 28 teeth tooth width 30mm outside diameter 120mm SKU: 23402800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-28-teeth-tooth-width-30mm-outside-diameter-120mm-sku-23402800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 27 teeth tooth width 30mm outside diameter 116mm SKU: 23402700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-27-teeth-tooth-width-30mm-outside-diameter-116mm-sku-23402700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 26 teeth tooth width 30mm outside diameter 112mm SKU: 23402600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-26-teeth-tooth-width-30mm-outside-diameter-112mm-sku-23402600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 25 teeth tooth width 30mm outside diameter 108mm SKU: 23402500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-25-teeth-tooth-width-30mm-outside-diameter-108mm-sku-23402500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 24 teeth tooth width 30mm outside diameter 104mm SKU: 23402400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-24-teeth-tooth-width-30mm-outside-diameter-104mm-sku-23402400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 23 teeth tooth width 30mm outside diameter 100mm SKU: 23402300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-23-teeth-tooth-width-30mm-outside-diameter-100mm-sku-23402300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 22 teeth tooth width 30mm outside diameter 96mm SKU: 23402200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-22-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23402200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 21 teeth tooth width 30mm outside diameter 92mm SKU: 23402100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-21-teeth-tooth-width-30mm-outside-diameter-92mm-sku-23402100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 20 teeth tooth width 30mm outside diameter 88mm SKU: 23402000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-20-teeth-tooth-width-30mm-outside-diameter-88mm-sku-23402000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 19 teeth tooth width 30mm outside diameter 84mm SKU: 23401900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-19-teeth-tooth-width-30mm-outside-diameter-84mm-sku-23401900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 18 teeth tooth width 30mm outside diameter 80mm SKU: 23401800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-18-teeth-tooth-width-30mm-outside-diameter-80mm-sku-23401800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 17 teeth tooth width 30mm outside diameter 76mm SKU: 23401700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-17-teeth-tooth-width-30mm-outside-diameter-76mm-sku-23401700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 16 teeth tooth width 30mm outside diameter 72mm SKU: 23401600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-16-teeth-tooth-width-30mm-outside-diameter-72mm-sku-23401600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 15 teeth tooth width 30mm outside diameter 68mm SKU: 23401500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-15-teeth-tooth-width-30mm-outside-diameter-68mm-sku-23401500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 14 teeth tooth width 30mm outside diameter 64mm SKU: 23401400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-14-teeth-tooth-width-30mm-outside-diameter-64mm-sku-23401400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 13 teeth tooth width 30mm outside diameter 60mm SKU: 23401300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-13-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23401300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 12 teeth tooth width 30mm outside diameter 56mm SKU: 23401200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-12-teeth-tooth-width-30mm-outside-diameter-56mm-sku-23401200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 120 teeth tooth width 25mm outside diameter 366mm SKU: 23312000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-120-teeth-tooth-width-25mm-outside-diameter-366mm-sku-23312000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 114 teeth tooth width 25mm outside diameter 348mm SKU: 23311400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-114-teeth-tooth-width-25mm-outside-diameter-348mm-sku-23311400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 120 teeth tooth width 30mm outside diameter 366mm SKU: 23311120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-120-teeth-tooth-width-30mm-outside-diameter-366mm-sku-23311120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 100 teeth tooth width 30mm outside diameter 306mm SKU: 23311100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-100-teeth-tooth-width-30mm-outside-diameter-306mm-sku-23311100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 90 teeth tooth width 30mm outside diameter 276mm SKU: 23311090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-90-teeth-tooth-width-30mm-outside-diameter-276mm-sku-23311090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 75 teeth tooth width 30mm outside diameter 231mm SKU: 23311075](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-75-teeth-tooth-width-30mm-outside-diameter-231mm-sku-23311075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 70 teeth tooth width 30mm outside diameter 216mm SKU: 23311070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-70-teeth-tooth-width-30mm-outside-diameter-216mm-sku-23311070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 65 teeth tooth width 30mm outside diameter 201mm SKU: 23311065](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-65-teeth-tooth-width-30mm-outside-diameter-201mm-sku-23311065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 23311060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-23311060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 23311050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-23311050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 23311048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-23311048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 47 teeth tooth width 30mm outside diameter 147mm SKU: 23311047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-47-teeth-tooth-width-30mm-outside-diameter-147mm-sku-23311047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 46 teeth tooth width 30mm outside diameter 144mm SKU: 23311046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-46-teeth-tooth-width-30mm-outside-diameter-144mm-sku-23311046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 45 teeth tooth width 30mm outside diameter 141mm SKU: 23311045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-45-teeth-tooth-width-30mm-outside-diameter-141mm-sku-23311045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 44 teeth tooth width 30mm outside diameter 138mm SKU: 23311044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-44-teeth-tooth-width-30mm-outside-diameter-138mm-sku-23311044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 43 teeth tooth width 30mm outside diameter 135mm SKU: 23311043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-43-teeth-tooth-width-30mm-outside-diameter-135mm-sku-23311043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 42 teeth tooth width 30mm outside diameter 132mm SKU: 23311042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-42-teeth-tooth-width-30mm-outside-diameter-132mm-sku-23311042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 41 teeth tooth width 30mm outside diameter 129mm SKU: 23311041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-41-teeth-tooth-width-30mm-outside-diameter-129mm-sku-23311041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23311040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23311040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 39 teeth tooth width 30mm outside diameter 123mm SKU: 23311039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-39-teeth-tooth-width-30mm-outside-diameter-123mm-sku-23311039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 38 teeth tooth width 30mm outside diameter 120mm SKU: 23311038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-38-teeth-tooth-width-30mm-outside-diameter-120mm-sku-23311038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 37 teeth tooth width 30mm outside diameter 117mm SKU: 23311037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-37-teeth-tooth-width-30mm-outside-diameter-117mm-sku-23311037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23311036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23311036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 35 teeth tooth width 30mm outside diameter 111mm SKU: 23311035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-35-teeth-tooth-width-30mm-outside-diameter-111mm-sku-23311035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 34 teeth tooth width 30mm outside diameter 108mm SKU: 23311034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-34-teeth-tooth-width-30mm-outside-diameter-108mm-sku-23311034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 33 teeth tooth width 30mm outside diameter 105mm SKU: 23311033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-33-teeth-tooth-width-30mm-outside-diameter-105mm-sku-23311033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 32 teeth tooth width 30mm outside diameter 102mm SKU: 23311032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-32-teeth-tooth-width-30mm-outside-diameter-102mm-sku-23311032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 31 teeth tooth width 30mm outside diameter 99mm SKU: 23311031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-31-teeth-tooth-width-30mm-outside-diameter-99mm-sku-23311031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23311030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23311030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 29 teeth tooth width 30mm outside diameter 93mm SKU: 23311029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-29-teeth-tooth-width-30mm-outside-diameter-93mm-sku-23311029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 28 teeth tooth width 30mm outside diameter 90mm SKU: 23311028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-28-teeth-tooth-width-30mm-outside-diameter-90mm-sku-23311028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 27 teeth tooth width 30mm outside diameter 87mm SKU: 23311027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-27-teeth-tooth-width-30mm-outside-diameter-87mm-sku-23311027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 26 teeth tooth width 30mm outside diameter 84mm SKU: 23311026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-26-teeth-tooth-width-30mm-outside-diameter-84mm-sku-23311026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23311025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23311025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23311024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23311024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 23 teeth tooth width 30mm outside diameter 75mm SKU: 23311023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-23-teeth-tooth-width-30mm-outside-diameter-75mm-sku-23311023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 22 teeth tooth width 30mm outside diameter 72mm SKU: 23311022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-22-teeth-tooth-width-30mm-outside-diameter-72mm-sku-23311022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 21 teeth tooth width 30mm outside diameter 69mm SKU: 23311021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-21-teeth-tooth-width-30mm-outside-diameter-69mm-sku-23311021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23311020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23311020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 19 teeth tooth width 30mm outside diameter 63mm SKU: 23311019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-19-teeth-tooth-width-30mm-outside-diameter-63mm-sku-23311019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23311018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23311018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 17 teeth tooth width 30mm outside diameter 57mm SKU: 23311017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-17-teeth-tooth-width-30mm-outside-diameter-57mm-sku-23311017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 16 teeth tooth width 30mm outside diameter 54mm SKU: 23311016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-16-teeth-tooth-width-30mm-outside-diameter-54mm-sku-23311016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23311015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23311015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 14 teeth tooth width 30mm outside diameter 48mm SKU: 23311014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-14-teeth-tooth-width-30mm-outside-diameter-48mm-sku-23311014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 13 teeth tooth width 30mm outside diameter 45mm SKU: 23311013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-13-teeth-tooth-width-30mm-outside-diameter-45mm-sku-23311013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 12 teeth tooth width 30mm outside diameter 42mm SKU: 23311012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-12-teeth-tooth-width-30mm-outside-diameter-42mm-sku-23311012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 100 teeth tooth width 25mm outside diameter 306mm SKU: 23310000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-100-teeth-tooth-width-25mm-outside-diameter-306mm-sku-23310000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 90 teeth tooth width 25mm outside diameter 276mm SKU: 23309000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-90-teeth-tooth-width-25mm-outside-diameter-276mm-sku-23309000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 80 teeth tooth width 25mm outside diameter 246mm SKU: 23308000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-80-teeth-tooth-width-25mm-outside-diameter-246mm-sku-23308000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 76 teeth tooth width 25mm outside diameter 234mm SKU: 23307600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-76-teeth-tooth-width-25mm-outside-diameter-234mm-sku-23307600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 75 teeth tooth width 25mm outside diameter 231mm SKU: 23307500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-75-teeth-tooth-width-25mm-outside-diameter-231mm-sku-23307500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 72 teeth tooth width 25mm outside diameter 222mm SKU: 23307200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-72-teeth-tooth-width-25mm-outside-diameter-222mm-sku-23307200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 70 teeth tooth width 25mm outside diameter 216mm SKU: 23307000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-70-teeth-tooth-width-25mm-outside-diameter-216mm-sku-23307000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 67 teeth tooth width 25mm outside diameter 207mm SKU: 23306700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-67-teeth-tooth-width-25mm-outside-diameter-207mm-sku-23306700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 65 teeth tooth width 25mm outside diameter 201mm SKU: 23306500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-65-teeth-tooth-width-25mm-outside-diameter-201mm-sku-23306500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 60 teeth tooth width 25mm outside diameter 186mm SKU: 23306000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-60-teeth-tooth-width-25mm-outside-diameter-186mm-sku-23306000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 58 teeth tooth width 25mm outside diameter 180mm SKU: 23305800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-58-teeth-tooth-width-25mm-outside-diameter-180mm-sku-23305800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 25 teeth tooth width 50mm outside diameter 162mm SKU: 23602500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-25-teeth-tooth-width-50mm-outside-diameter-162mm-sku-23602500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 24 teeth tooth width 50mm outside diameter 156mm SKU: 23602400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-24-teeth-tooth-width-50mm-outside-diameter-156mm-sku-23602400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 23 teeth tooth width 50mm outside diameter 150mm SKU: 23602300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-23-teeth-tooth-width-50mm-outside-diameter-150mm-sku-23602300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 22 teeth tooth width 50mm outside diameter 144mm SKU: 23602200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-22-teeth-tooth-width-50mm-outside-diameter-144mm-sku-23602200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 21 teeth tooth width 50mm outside diameter 138mm SKU: 23602100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-21-teeth-tooth-width-50mm-outside-diameter-138mm-sku-23602100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 20 teeth tooth width 50mm outside diameter 132mm SKU: 23602000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-20-teeth-tooth-width-50mm-outside-diameter-132mm-sku-23602000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 19 teeth tooth width 50mm outside diameter 126mm SKU: 23601900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-19-teeth-tooth-width-50mm-outside-diameter-126mm-sku-23601900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 18 teeth tooth width 50mm outside diameter 120mm SKU: 23601800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-18-teeth-tooth-width-50mm-outside-diameter-120mm-sku-23601800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 17 teeth tooth width 50mm outside diameter 114mm SKU: 23601700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-17-teeth-tooth-width-50mm-outside-diameter-114mm-sku-23601700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 16 teeth tooth width 50mm outside diameter 108mm SKU: 23601600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-16-teeth-tooth-width-50mm-outside-diameter-108mm-sku-23601600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 15 teeth tooth width 50mm outside diameter 102mm SKU: 23601500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-15-teeth-tooth-width-50mm-outside-diameter-102mm-sku-23601500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 14 teeth tooth width 50mm outside diameter 96mm SKU: 23601400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-14-teeth-tooth-width-50mm-outside-diameter-96mm-sku-23601400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 13 teeth tooth width 50mm outside diameter 90mm SKU: 23601300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-13-teeth-tooth-width-50mm-outside-diameter-90mm-sku-23601300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 12 teeth tooth width 50mm outside diameter 84mm SKU: 23601200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-12-teeth-tooth-width-50mm-outside-diameter-84mm-sku-23601200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 60 teeth tooth width 50mm outside diameter 310mm SKU: 23511060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-60-teeth-tooth-width-50mm-outside-diameter-310mm-sku-23511060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 50 teeth tooth width 50mm outside diameter 260mm SKU: 23511050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-50-teeth-tooth-width-50mm-outside-diameter-260mm-sku-23511050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 40 teeth tooth width 50mm outside diameter 210mm SKU: 23511040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-40-teeth-tooth-width-50mm-outside-diameter-210mm-sku-23511040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 36 teeth tooth width 50mm outside diameter 190mm SKU: 23511036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-36-teeth-tooth-width-50mm-outside-diameter-190mm-sku-23511036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 32 teeth tooth width 50mm outside diameter 170mm SKU: 23511032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-32-teeth-tooth-width-50mm-outside-diameter-170mm-sku-23511032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 30 teeth tooth width 50mm outside diameter 160mm SKU: 23511030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-30-teeth-tooth-width-50mm-outside-diameter-160mm-sku-23511030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 29 teeth tooth width 50mm outside diameter 155mm SKU: 23511029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-29-teeth-tooth-width-50mm-outside-diameter-155mm-sku-23511029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 28 teeth tooth width 50mm outside diameter 150mm SKU: 23511028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-28-teeth-tooth-width-50mm-outside-diameter-150mm-sku-23511028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 27 teeth tooth width 50mm outside diameter 145mm SKU: 23511027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-27-teeth-tooth-width-50mm-outside-diameter-145mm-sku-23511027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 26 teeth tooth width 50mm outside diameter 140mm SKU: 23511026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-26-teeth-tooth-width-50mm-outside-diameter-140mm-sku-23511026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 25 teeth tooth width 50mm outside diameter 135mm SKU: 23511025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-25-teeth-tooth-width-50mm-outside-diameter-135mm-sku-23511025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 24 teeth tooth width 50mm outside diameter 130mm SKU: 23511024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-24-teeth-tooth-width-50mm-outside-diameter-130mm-sku-23511024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 23 teeth tooth width 50mm outside diameter 125mm SKU: 23511023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-23-teeth-tooth-width-50mm-outside-diameter-125mm-sku-23511023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 22 teeth tooth width 50mm outside diameter 120mm SKU: 23511022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-22-teeth-tooth-width-50mm-outside-diameter-120mm-sku-23511022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 21 teeth tooth width 50mm outside diameter 115mm SKU: 23511021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-21-teeth-tooth-width-50mm-outside-diameter-115mm-sku-23511021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 20 teeth tooth width 50mm outside diameter 110mm SKU: 23511020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-20-teeth-tooth-width-50mm-outside-diameter-110mm-sku-23511020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 19 teeth tooth width 50mm outside diameter 105mm SKU: 23511019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-19-teeth-tooth-width-50mm-outside-diameter-105mm-sku-23511019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 18 teeth tooth width 50mm outside diameter 100mm SKU: 23511018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-18-teeth-tooth-width-50mm-outside-diameter-100mm-sku-23511018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 17 teeth tooth width 50mm outside diameter 95mm SKU: 23511017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-17-teeth-tooth-width-50mm-outside-diameter-95mm-sku-23511017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 16 teeth tooth width 50mm outside diameter 90mm SKU: 23511016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-16-teeth-tooth-width-50mm-outside-diameter-90mm-sku-23511016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 15 teeth tooth width 50mm outside diameter 85mm SKU: 23511015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-15-teeth-tooth-width-50mm-outside-diameter-85mm-sku-23511015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 14 teeth tooth width 50mm outside diameter 80mm SKU: 23511014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-14-teeth-tooth-width-50mm-outside-diameter-80mm-sku-23511014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 13 teeth tooth width 50mm outside diameter 75mm SKU: 23511013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-13-teeth-tooth-width-50mm-outside-diameter-75mm-sku-23511013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 12 teeth tooth width 50mm outside diameter 70mm SKU: 23511012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-12-teeth-tooth-width-50mm-outside-diameter-70mm-sku-23511012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 60 teeth tooth width 40mm outside diameter 310mm SKU: 23506000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-60-teeth-tooth-width-40mm-outside-diameter-310mm-sku-23506000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 56 teeth tooth width 40mm outside diameter 290mm SKU: 23505600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-56-teeth-tooth-width-40mm-outside-diameter-290mm-sku-23505600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 55 teeth tooth width 40mm outside diameter 285mm SKU: 23505500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-55-teeth-tooth-width-40mm-outside-diameter-285mm-sku-23505500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 52 teeth tooth width 40mm outside diameter 270mm SKU: 23505200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-52-teeth-tooth-width-40mm-outside-diameter-270mm-sku-23505200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 50 teeth tooth width 40mm outside diameter 260mm SKU: 23505000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-50-teeth-tooth-width-40mm-outside-diameter-260mm-sku-23505000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 48 teeth tooth width 40mm outside diameter 250mm SKU: 23504800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-48-teeth-tooth-width-40mm-outside-diameter-250mm-sku-23504800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 45 teeth tooth width 40mm outside diameter 235mm SKU: 23504500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-45-teeth-tooth-width-40mm-outside-diameter-235mm-sku-23504500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 40 teeth tooth width 40mm outside diameter 210mm SKU: 23504000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-40-teeth-tooth-width-40mm-outside-diameter-210mm-sku-23504000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 38 teeth tooth width 40mm outside diameter 200mm SKU: 23503800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-38-teeth-tooth-width-40mm-outside-diameter-200mm-sku-23503800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 36 teeth tooth width 40mm outside diameter 190mm SKU: 23503600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-36-teeth-tooth-width-40mm-outside-diameter-190mm-sku-23503600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 35 teeth tooth width 40mm outside diameter 185mm SKU: 23503500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-35-teeth-tooth-width-40mm-outside-diameter-185mm-sku-23503500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 32 teeth tooth width 40mm outside diameter 170mm SKU: 23503200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-32-teeth-tooth-width-40mm-outside-diameter-170mm-sku-23503200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 28 teeth tooth width 40mm outside diameter 150mm SKU: 23502800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-28-teeth-tooth-width-40mm-outside-diameter-150mm-sku-23502800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 27 teeth tooth width 40mm outside diameter 145mm SKU: 23502700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-27-teeth-tooth-width-40mm-outside-diameter-145mm-sku-23502700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 26 teeth tooth width 40mm outside diameter 140mm SKU: 23502600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-26-teeth-tooth-width-40mm-outside-diameter-140mm-sku-23502600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 25 teeth tooth width 40mm outside diameter 135mm SKU: 23502500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-25-teeth-tooth-width-40mm-outside-diameter-135mm-sku-23502500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 24 teeth tooth width 40mm outside diameter 130mm SKU: 23502400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-24-teeth-tooth-width-40mm-outside-diameter-130mm-sku-23502400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 23 teeth tooth width 40mm outside diameter 125mm SKU: 23502300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-23-teeth-tooth-width-40mm-outside-diameter-125mm-sku-23502300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 22 teeth tooth width 40mm outside diameter 120mm SKU: 23502200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-22-teeth-tooth-width-40mm-outside-diameter-120mm-sku-23502200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 21 teeth tooth width 40mm outside diameter 115mm SKU: 23502100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-21-teeth-tooth-width-40mm-outside-diameter-115mm-sku-23502100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 20 teeth tooth width 40mm outside diameter 110mm SKU: 23502000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-20-teeth-tooth-width-40mm-outside-diameter-110mm-sku-23502000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 19 teeth tooth width 40mm outside diameter 105mm SKU: 23501900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-19-teeth-tooth-width-40mm-outside-diameter-105mm-sku-23501900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 18 teeth tooth width 40mm outside diameter 100mm SKU: 23501800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-18-teeth-tooth-width-40mm-outside-diameter-100mm-sku-23501800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 17 teeth tooth width 40mm outside diameter 95mm SKU: 23501700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-17-teeth-tooth-width-40mm-outside-diameter-95mm-sku-23501700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 16 teeth tooth width 40mm outside diameter 90mm SKU: 23501600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-16-teeth-tooth-width-40mm-outside-diameter-90mm-sku-23501600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 15 teeth tooth width 40mm outside diameter 85mm SKU: 23501500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-15-teeth-tooth-width-40mm-outside-diameter-85mm-sku-23501500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 14 teeth tooth width 40mm outside diameter 80mm SKU: 23501400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-14-teeth-tooth-width-40mm-outside-diameter-80mm-sku-23501400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 13 teeth tooth width 40mm outside diameter 75mm SKU: 23501300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-13-teeth-tooth-width-40mm-outside-diameter-75mm-sku-23501300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 12 teeth tooth width 40mm outside diameter 70mm SKU: 23501200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-12-teeth-tooth-width-40mm-outside-diameter-70mm-sku-23501200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 90 teeth tooth width 40mm outside diameter 368mm SKU: 23411090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-90-teeth-tooth-width-40mm-outside-diameter-368mm-sku-23411090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 23411060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-23411060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23411050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23411050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23411040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23411040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 38 teeth tooth width 40mm outside diameter 160mm SKU: 23411038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-38-teeth-tooth-width-40mm-outside-diameter-160mm-sku-23411038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 23411036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-23411036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 35 teeth tooth width 40mm outside diameter 148mm SKU: 23411035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-35-teeth-tooth-width-40mm-outside-diameter-148mm-sku-23411035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 34 teeth tooth width 40mm outside diameter 144mm SKU: 23411034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-34-teeth-tooth-width-40mm-outside-diameter-144mm-sku-23411034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 33 teeth tooth width 40mm outside diameter 140mm SKU: 23411033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-33-teeth-tooth-width-40mm-outside-diameter-140mm-sku-23411033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 32 teeth tooth width 40mm outside diameter 136mm SKU: 23411032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-32-teeth-tooth-width-40mm-outside-diameter-136mm-sku-23411032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 31 teeth tooth width 40mm outside diameter 132mm SKU: 23411031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-31-teeth-tooth-width-40mm-outside-diameter-132mm-sku-23411031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23411030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23411030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 29 teeth tooth width 40mm outside diameter 124mm SKU: 23411029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-29-teeth-tooth-width-40mm-outside-diameter-124mm-sku-23411029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 28 teeth tooth width 40mm outside diameter 120mm SKU: 23411028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-28-teeth-tooth-width-40mm-outside-diameter-120mm-sku-23411028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 27 teeth tooth width 40mm outside diameter 116mm SKU: 23411027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-27-teeth-tooth-width-40mm-outside-diameter-116mm-sku-23411027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 26 teeth tooth width 40mm outside diameter 112mm SKU: 23411026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-26-teeth-tooth-width-40mm-outside-diameter-112mm-sku-23411026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23411025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23411025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23411024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23411024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 23 teeth tooth width 40mm outside diameter 100mm SKU: 23411023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-23-teeth-tooth-width-40mm-outside-diameter-100mm-sku-23411023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 22 teeth tooth width 40mm outside diameter 96mm SKU: 23411022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-22-teeth-tooth-width-40mm-outside-diameter-96mm-sku-23411022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 21 teeth tooth width 40mm outside diameter 92mm SKU: 23411021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-21-teeth-tooth-width-40mm-outside-diameter-92mm-sku-23411021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23411020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23411020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 19 teeth tooth width 40mm outside diameter 84mm SKU: 23411019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-19-teeth-tooth-width-40mm-outside-diameter-84mm-sku-23411019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 18 teeth tooth width 40mm outside diameter 80mm SKU: 23411018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-18-teeth-tooth-width-40mm-outside-diameter-80mm-sku-23411018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 17 teeth tooth width 40mm outside diameter 76mm SKU: 23411017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-17-teeth-tooth-width-40mm-outside-diameter-76mm-sku-23411017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 16 teeth tooth width 40mm outside diameter 72mm SKU: 23411016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-sku-23411016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23411015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23411015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 14 teeth tooth width 40mm outside diameter 64mm SKU: 23411014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-14-teeth-tooth-width-40mm-outside-diameter-64mm-sku-23411014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 13 teeth tooth width 40mm outside diameter 60mm SKU: 23411013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-13-teeth-tooth-width-40mm-outside-diameter-60mm-sku-23411013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 12 teeth tooth width 40mm outside diameter 56mm SKU: 23411012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-sku-23411012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 100 teeth tooth width 30mm outside diameter 408mm SKU: 23410000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-100-teeth-tooth-width-30mm-outside-diameter-408mm-sku-23410000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 96 teeth tooth width 30mm outside diameter 392mm SKU: 23409600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-96-teeth-tooth-width-30mm-outside-diameter-392mm-sku-23409600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 90 teeth tooth width 30mm outside diameter 368mm SKU: 23409000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-90-teeth-tooth-width-30mm-outside-diameter-368mm-sku-23409000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 100 teeth tooth width 20mm outside diameter 204mm SKU: 24111100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-100-teeth-tooth-width-20mm-outside-diameter-204mm-sku-24111100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 95 teeth tooth width 20mm outside diameter 194mm SKU: 24111095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-95-teeth-tooth-width-20mm-outside-diameter-194mm-sku-24111095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 90 teeth tooth width 20mm outside diameter 184mm SKU: 24111090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-90-teeth-tooth-width-20mm-outside-diameter-184mm-sku-24111090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 85 teeth tooth width 20mm outside diameter 174mm SKU: 24111085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-85-teeth-tooth-width-20mm-outside-diameter-174mm-sku-24111085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 24111080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-24111080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 76 teeth tooth width 20mm outside diameter 156mm SKU: 24111076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-76-teeth-tooth-width-20mm-outside-diameter-156mm-sku-24111076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 75 teeth tooth width 20mm outside diameter 154mm SKU: 24111075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-75-teeth-tooth-width-20mm-outside-diameter-154mm-sku-24111075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 72 teeth tooth width 20mm outside diameter 148mm SKU: 24111072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-72-teeth-tooth-width-20mm-outside-diameter-148mm-sku-24111072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 24111050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-24111050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 24111048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-24111048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 24111045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-24111045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 24111040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-24111040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 24111036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-24111036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 24111035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-24111035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 24111030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-24111030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 24111025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-24111025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 24111024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-24111024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 24111020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-24111020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 24111018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-24111018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 100 teeth tooth width 16mm outside diameter 204mm SKU: 24110000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-100-teeth-tooth-width-16mm-outside-diameter-204mm-sku-24110000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 96 teeth tooth width 16mm outside diameter 196mm SKU: 24109600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-96-teeth-tooth-width-16mm-outside-diameter-196mm-sku-24109600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 95 teeth tooth width 16mm outside diameter 194mm SKU: 24109500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-95-teeth-tooth-width-16mm-outside-diameter-194mm-sku-24109500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 90 teeth tooth width 16mm outside diameter 184mm SKU: 24109000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-90-teeth-tooth-width-16mm-outside-diameter-184mm-sku-24109000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 85 teeth tooth width 16mm outside diameter 174mm SKU: 24108500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-85-teeth-tooth-width-16mm-outside-diameter-174mm-sku-24108500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 80 teeth tooth width 16mm outside diameter 164mm SKU: 24108000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-80-teeth-tooth-width-16mm-outside-diameter-164mm-sku-24108000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 78 teeth tooth width 16mm outside diameter 160mm SKU: 24107800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-78-teeth-tooth-width-16mm-outside-diameter-160mm-sku-24107800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 76 teeth tooth width 16mm outside diameter 156mm SKU: 24107600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-76-teeth-tooth-width-16mm-outside-diameter-156mm-sku-24107600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 75 teeth tooth width 16mm outside diameter 154mm SKU: 24107500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-75-teeth-tooth-width-16mm-outside-diameter-154mm-sku-24107500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 72 teeth tooth width 16mm outside diameter 148mm SKU: 24107200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-72-teeth-tooth-width-16mm-outside-diameter-148mm-sku-24107200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 70 teeth tooth width 16mm outside diameter 144mm SKU: 24107000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-70-teeth-tooth-width-16mm-outside-diameter-144mm-sku-24107000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 67 teeth tooth width 16mm outside diameter 138mm SKU: 24106700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-67-teeth-tooth-width-16mm-outside-diameter-138mm-sku-24106700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 65 teeth tooth width 16mm outside diameter 134mm SKU: 24106500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-65-teeth-tooth-width-16mm-outside-diameter-134mm-sku-24106500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 64 teeth tooth width 16mm outside diameter 132mm SKU: 24106400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-64-teeth-tooth-width-16mm-outside-diameter-132mm-sku-24106400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 63 teeth tooth width 16mm outside diameter 130mm SKU: 24106300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-63-teeth-tooth-width-16mm-outside-diameter-130mm-sku-24106300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 61 teeth tooth width 16mm outside diameter 126mm SKU: 24106100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-61-teeth-tooth-width-16mm-outside-diameter-126mm-sku-24106100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 60 teeth tooth width 16mm outside diameter 124mm SKU: 24106000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-60-teeth-tooth-width-16mm-outside-diameter-124mm-sku-24106000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 57 teeth tooth width 16mm outside diameter 118mm SKU: 24105700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-57-teeth-tooth-width-16mm-outside-diameter-118mm-sku-24105700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 56 teeth tooth width 16mm outside diameter 116mm SKU: 24105600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-56-teeth-tooth-width-16mm-outside-diameter-116mm-sku-24105600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 55 teeth tooth width 16mm outside diameter 114mm SKU: 24105500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-55-teeth-tooth-width-16mm-outside-diameter-114mm-sku-24105500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 54 teeth tooth width 16mm outside diameter 112mm SKU: 24105400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-54-teeth-tooth-width-16mm-outside-diameter-112mm-sku-24105400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 53 teeth tooth width 16mm outside diameter 110mm SKU: 24105300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-53-teeth-tooth-width-16mm-outside-diameter-110mm-sku-24105300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 52 teeth tooth width 16mm outside diameter 108mm SKU: 24105200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-52-teeth-tooth-width-16mm-outside-diameter-108mm-sku-24105200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 51 teeth tooth width 16mm outside diameter 106mm SKU: 24105100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-51-teeth-tooth-width-16mm-outside-diameter-106mm-sku-24105100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 50 teeth tooth width 16mm outside diameter 104mm SKU: 24105000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-50-teeth-tooth-width-16mm-outside-diameter-104mm-sku-24105000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 49 teeth tooth width 16mm outside diameter 102mm SKU: 24104900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-49-teeth-tooth-width-16mm-outside-diameter-102mm-sku-24104900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 48 teeth tooth width 16mm outside diameter 100mm SKU: 24104800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-48-teeth-tooth-width-16mm-outside-diameter-100mm-sku-24104800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 47 teeth tooth width 16mm outside diameter 98mm SKU: 24104700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-47-teeth-tooth-width-16mm-outside-diameter-98mm-sku-24104700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 45 teeth tooth width 16mm outside diameter 94mm SKU: 24104500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-45-teeth-tooth-width-16mm-outside-diameter-94mm-sku-24104500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 43 teeth tooth width 16mm outside diameter 90mm SKU: 24104300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-43-teeth-tooth-width-16mm-outside-diameter-90mm-sku-24104300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 42 teeth tooth width 16mm outside diameter 88mm SKU: 24104200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-42-teeth-tooth-width-16mm-outside-diameter-88mm-sku-24104200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 41 teeth tooth width 16mm outside diameter 86mm SKU: 24104100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-41-teeth-tooth-width-16mm-outside-diameter-86mm-sku-24104100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 40 teeth tooth width 16mm outside diameter 84mm SKU: 24104000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-40-teeth-tooth-width-16mm-outside-diameter-84mm-sku-24104000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 39 teeth tooth width 16mm outside diameter 82mm SKU: 24103900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-39-teeth-tooth-width-16mm-outside-diameter-82mm-sku-24103900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 38 teeth tooth width 16mm outside diameter 80mm SKU: 24103800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-38-teeth-tooth-width-16mm-outside-diameter-80mm-sku-24103800-2/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 38 teeth tooth width 16mm outside diameter 80mm SKU: 24103800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-38-teeth-tooth-width-16mm-outside-diameter-80mm-sku-24103800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 37 teeth tooth width 16mm outside diameter 78mm SKU: 24103700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-37-teeth-tooth-width-16mm-outside-diameter-78mm-sku-24103700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 36 teeth tooth width 16mm outside diameter 76mm SKU: 24103600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-36-teeth-tooth-width-16mm-outside-diameter-76mm-sku-24103600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 35 teeth tooth width 16mm outside diameter 74mm SKU: 24103500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-35-teeth-tooth-width-16mm-outside-diameter-74mm-sku-24103500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 32 teeth tooth width 16mm outside diameter 68mm SKU: 24103200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-32-teeth-tooth-width-16mm-outside-diameter-68mm-sku-24103200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 30 teeth tooth width 16mm outside diameter 64mm SKU: 24103000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-30-teeth-tooth-width-16mm-outside-diameter-64mm-sku-24103000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 28 teeth tooth width 16mm outside diameter 60mm SKU: 24102800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-28-teeth-tooth-width-16mm-outside-diameter-60mm-sku-24102800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 27 teeth tooth width 16mm outside diameter 58mm SKU: 24102700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-27-teeth-tooth-width-16mm-outside-diameter-58mm-sku-24102700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 26 teeth tooth width 16mm outside diameter 56mm SKU: 24102600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-26-teeth-tooth-width-16mm-outside-diameter-56mm-sku-24102600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 25 teeth tooth width 16mm outside diameter 54mm SKU: 24102500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-25-teeth-tooth-width-16mm-outside-diameter-54mm-sku-24102500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 24 teeth tooth width 16mm outside diameter 52mm SKU: 24102400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-24-teeth-tooth-width-16mm-outside-diameter-52mm-sku-24102400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 23 teeth tooth width 16mm outside diameter 50mm SKU: 24102300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-23-teeth-tooth-width-16mm-outside-diameter-50mm-sku-24102300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 22 teeth tooth width 16mm outside diameter 48mm SKU: 24102200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-22-teeth-tooth-width-16mm-outside-diameter-48mm-sku-24102200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 21 teeth tooth width 16mm outside diameter 46mm SKU: 24102100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-21-teeth-tooth-width-16mm-outside-diameter-46mm-sku-24102100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 20 teeth tooth width 16mm outside diameter 44mm SKU: 24102000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-20-teeth-tooth-width-16mm-outside-diameter-44mm-sku-24102000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 18 teeth tooth width 16mm outside diameter 40mm SKU: 24101800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-18-teeth-tooth-width-16mm-outside-diameter-40mm-sku-24101800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 60 teeth tooth width 60mm outside diameter 372mm SKU: 23611060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-60-teeth-tooth-width-60mm-outside-diameter-372mm-sku-23611060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 50 teeth tooth width 60mm outside diameter 312mm SKU: 23611050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-50-teeth-tooth-width-60mm-outside-diameter-312mm-sku-23611050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 36 teeth tooth width 60mm outside diameter 228mm SKU: 23611036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-36-teeth-tooth-width-60mm-outside-diameter-228mm-sku-23611036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 30 teeth tooth width 60mm outside diameter 192mm SKU: 23611030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-30-teeth-tooth-width-60mm-outside-diameter-192mm-sku-23611030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 25 teeth tooth width 60mm outside diameter 162mm SKU: 23611025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-25-teeth-tooth-width-60mm-outside-diameter-162mm-sku-23611025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 24 teeth tooth width 60mm outside diameter 156mm SKU: 23611024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-24-teeth-tooth-width-60mm-outside-diameter-156mm-sku-23611024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 22 teeth tooth width 60mm outside diameter 144mm SKU: 23611022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-22-teeth-tooth-width-60mm-outside-diameter-144mm-sku-23611022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 21 teeth tooth width 60mm outside diameter 138mm SKU: 23611021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-21-teeth-tooth-width-60mm-outside-diameter-138mm-sku-23611021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 20 teeth tooth width 60mm outside diameter 132mm SKU: 23611020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-20-teeth-tooth-width-60mm-outside-diameter-132mm-sku-23611020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 18 teeth tooth width 60mm outside diameter 120mm SKU: 23611018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-18-teeth-tooth-width-60mm-outside-diameter-120mm-sku-23611018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 17 teeth tooth width 60mm outside diameter 114mm SKU: 23611017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-17-teeth-tooth-width-60mm-outside-diameter-114mm-sku-23611017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 16 teeth tooth width 60mm outside diameter 108mm SKU: 23611016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-16-teeth-tooth-width-60mm-outside-diameter-108mm-sku-23611016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 15 teeth tooth width 60mm outside diameter 102mm SKU: 23611015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-15-teeth-tooth-width-60mm-outside-diameter-102mm-sku-23611015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 14 teeth tooth width 60mm outside diameter 96mm SKU: 23611014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-14-teeth-tooth-width-60mm-outside-diameter-96mm-sku-23611014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 13 teeth tooth width 60mm outside diameter 90mm SKU: 23611013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-13-teeth-tooth-width-60mm-outside-diameter-90mm-sku-23611013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 12 teeth tooth width 60mm outside diameter 84mm SKU: 23611012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-12-teeth-tooth-width-60mm-outside-diameter-84mm-sku-23611012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 60 teeth tooth width 50mm outside diameter 372mm SKU: 23606000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-60-teeth-tooth-width-50mm-outside-diameter-372mm-sku-23606000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 55 teeth tooth width 50mm outside diameter 342mm SKU: 23605500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-55-teeth-tooth-width-50mm-outside-diameter-342mm-sku-23605500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 50 teeth tooth width 50mm outside diameter 312mm SKU: 23605000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-50-teeth-tooth-width-50mm-outside-diameter-312mm-sku-23605000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 48 teeth tooth width 50mm outside diameter 300mm SKU: 23604800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-48-teeth-tooth-width-50mm-outside-diameter-300mm-sku-23604800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 45 teeth tooth width 50mm outside diameter 282mm SKU: 23604500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-45-teeth-tooth-width-50mm-outside-diameter-282mm-sku-23604500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 40 teeth tooth width 50mm outside diameter 252mm SKU: 23604000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-40-teeth-tooth-width-50mm-outside-diameter-252mm-sku-23604000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 38 teeth tooth width 50mm outside diameter 240mm SKU: 23603800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-38-teeth-tooth-width-50mm-outside-diameter-240mm-sku-23603800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 36 teeth tooth width 50mm outside diameter 228mm SKU: 23603600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-36-teeth-tooth-width-50mm-outside-diameter-228mm-sku-23603600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 35 teeth tooth width 50mm outside diameter 222mm SKU: 23603500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-35-teeth-tooth-width-50mm-outside-diameter-222mm-sku-23603500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 32 teeth tooth width 50mm outside diameter 204mm SKU: 23603200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-32-teeth-tooth-width-50mm-outside-diameter-204mm-sku-23603200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 30 teeth tooth width 50mm outside diameter 192mm SKU: 23603000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-30-teeth-tooth-width-50mm-outside-diameter-192mm-sku-23603000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 28 teeth tooth width 50mm outside diameter 180mm SKU: 23602800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-28-teeth-tooth-width-50mm-outside-diameter-180mm-sku-23602800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 27 teeth tooth width 50mm outside diameter 174mm SKU: 23602700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-27-teeth-tooth-width-50mm-outside-diameter-174mm-sku-23602700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 26 teeth tooth width 50mm outside diameter 168mm SKU: 23602600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-26-teeth-tooth-width-50mm-outside-diameter-168mm-sku-23602600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 24311018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-24311018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 100 teeth tooth width 25mm outside diameter 306mm SKU: 24310000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-100-teeth-tooth-width-25mm-outside-diameter-306mm-sku-24310000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 96 teeth tooth width 25mm outside diameter 294mm SKU: 24309600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-96-teeth-tooth-width-25mm-outside-diameter-294mm-sku-24309600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 90 teeth tooth width 25mm outside diameter 276mm SKU: 24309000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-90-teeth-tooth-width-25mm-outside-diameter-276mm-sku-24309000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 80 teeth tooth width 25mm outside diameter 246mm SKU: 24308000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-80-teeth-tooth-width-25mm-outside-diameter-246mm-sku-24308000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 76 teeth tooth width 25mm outside diameter 234mm SKU: 24307600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-76-teeth-tooth-width-25mm-outside-diameter-234mm-sku-24307600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 72 teeth tooth width 25mm outside diameter 222mm SKU: 24307200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-72-teeth-tooth-width-25mm-outside-diameter-222mm-sku-24307200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 70 teeth tooth width 25mm outside diameter 216mm SKU: 24307000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-70-teeth-tooth-width-25mm-outside-diameter-216mm-sku-24307000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 67 teeth tooth width 25mm outside diameter 207mm SKU: 24306700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-67-teeth-tooth-width-25mm-outside-diameter-207mm-sku-24306700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 65 teeth tooth width 25mm outside diameter 201mm SKU: 24306500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-65-teeth-tooth-width-25mm-outside-diameter-201mm-sku-24306500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 60 teeth tooth width 25mm outside diameter 186mm SKU: 24306000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-60-teeth-tooth-width-25mm-outside-diameter-186mm-sku-24306000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 58 teeth tooth width 25mm outside diameter 180mm SKU: 24305800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-58-teeth-tooth-width-25mm-outside-diameter-180mm-sku-24305800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 56 teeth tooth width 25mm outside diameter 174mm SKU: 24305600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-56-teeth-tooth-width-25mm-outside-diameter-174mm-sku-24305600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 53 teeth tooth width 25mm outside diameter 165mm SKU: 24305300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-53-teeth-tooth-width-25mm-outside-diameter-165mm-sku-24305300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 52 teeth tooth width 25mm outside diameter 162mm SKU: 24305200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-52-teeth-tooth-width-25mm-outside-diameter-162mm-sku-24305200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 50 teeth tooth width 25mm outside diameter 156mm SKU: 24305000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-50-teeth-tooth-width-25mm-outside-diameter-156mm-sku-24305000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 48 teeth tooth width 25mm outside diameter 150mm SKU: 24304800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-48-teeth-tooth-width-25mm-outside-diameter-150mm-sku-24304800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 47 teeth tooth width 25mm outside diameter 147mm SKU: 24304700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-47-teeth-tooth-width-25mm-outside-diameter-147mm-sku-24304700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 46 teeth tooth width 25mm outside diameter 144mm SKU: 24304600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-46-teeth-tooth-width-25mm-outside-diameter-144mm-sku-24304600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 45 teeth tooth width 25mm outside diameter 141mm SKU: 24304500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-45-teeth-tooth-width-25mm-outside-diameter-141mm-sku-24304500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 42 teeth tooth width 25mm outside diameter 132mm SKU: 24304200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-42-teeth-tooth-width-25mm-outside-diameter-132mm-sku-24304200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 40 teeth tooth width 25mm outside diameter 126mm SKU: 24304000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-40-teeth-tooth-width-25mm-outside-diameter-126mm-sku-24304000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 38 teeth tooth width 25mm outside diameter 120mm SKU: 24303800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-38-teeth-tooth-width-25mm-outside-diameter-120mm-sku-24303800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 37 teeth tooth width 25mm outside diameter 117mm SKU: 24303700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-37-teeth-tooth-width-25mm-outside-diameter-117mm-sku-24303700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 35 teeth tooth width 25mm outside diameter 111mm SKU: 24303500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-35-teeth-tooth-width-25mm-outside-diameter-111mm-sku-24303500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 30 teeth tooth width 25mm outside diameter 96mm SKU: 24303000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-30-teeth-tooth-width-25mm-outside-diameter-96mm-sku-24303000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 28 teeth tooth width 25mm outside diameter 90mm SKU: 24302800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-28-teeth-tooth-width-25mm-outside-diameter-90mm-sku-24302800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 25 teeth tooth width 25mm outside diameter 81mm SKU: 24302500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-25-teeth-tooth-width-25mm-outside-diameter-81mm-sku-24302500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 24 teeth tooth width 25mm outside diameter 78mm SKU: 24302400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-24-teeth-tooth-width-25mm-outside-diameter-78mm-sku-24302400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 21 teeth tooth width 25mm outside diameter 69mm SKU: 24302100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-21-teeth-tooth-width-25mm-outside-diameter-69mm-sku-24302100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 20 teeth tooth width 25mm outside diameter 66mm SKU: 24302000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-20-teeth-tooth-width-25mm-outside-diameter-66mm-sku-24302000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 18 teeth tooth width 25mm outside diameter 60mm SKU: 24301800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-18-teeth-tooth-width-25mm-outside-diameter-60mm-sku-24301800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 120 teeth tooth width 20mm outside diameter 305mm SKU: 24212000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-120-teeth-tooth-width-20mm-outside-diameter-305mm-sku-24212000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 114 teeth tooth width 20mm outside diameter 290mm SKU: 24211400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-114-teeth-tooth-width-20mm-outside-diameter-290mm-sku-24211400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 127 teeth tooth width 25mm outside diameter 322.5mm SKU: 24211127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-127-teeth-tooth-width-25mm-outside-diameter-322-5mm-sku-24211127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 120 teeth tooth width 25mm outside diameter 305mm SKU: 24211120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-120-teeth-tooth-width-25mm-outside-diameter-305mm-sku-24211120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 114 teeth tooth width 25mm outside diameter 290mm SKU: 24211114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-114-teeth-tooth-width-25mm-outside-diameter-290mm-sku-24211114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 110 teeth tooth width 25mm outside diameter 280mm SKU: 24211110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-110-teeth-tooth-width-25mm-outside-diameter-280mm-sku-24211110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 100 teeth tooth width 25mm outside diameter 255mm SKU: 24211100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-100-teeth-tooth-width-25mm-outside-diameter-255mm-sku-24211100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 95 teeth tooth width 25mm outside diameter 242.5mm SKU: 24211095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-95-teeth-tooth-width-25mm-outside-diameter-242-5mm-sku-24211095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 90 teeth tooth width 25mm outside diameter 230mm SKU: 24211090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-90-teeth-tooth-width-25mm-outside-diameter-230mm-sku-24211090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 85 teeth tooth width 25mm outside diameter 217.5mm SKU: 24211085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-85-teeth-tooth-width-25mm-outside-diameter-217-5mm-sku-24211085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 80 teeth tooth width 25mm outside diameter 205mm SKU: 24211080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-80-teeth-tooth-width-25mm-outside-diameter-205mm-sku-24211080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 76 teeth tooth width 25mm outside diameter 195mm SKU: 24211076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-76-teeth-tooth-width-25mm-outside-diameter-195mm-sku-24211076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 75 teeth tooth width 25mm outside diameter 192.5mm SKU: 24211075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-75-teeth-tooth-width-25mm-outside-diameter-192-5mm-sku-24211075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 72 teeth tooth width 25mm outside diameter 185mm SKU: 24211072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-72-teeth-tooth-width-25mm-outside-diameter-185mm-sku-24211072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 70 teeth tooth width 25mm outside diameter 180mm SKU: 24211070](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-70-teeth-tooth-width-25mm-outside-diameter-180mm-sku-24211070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 65 teeth tooth width 25mm outside diameter 167.5mm SKU: 24211065](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-65-teeth-tooth-width-25mm-outside-diameter-167-5mm-sku-24211065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 24211060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-24211060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 24211050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-24211050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 24211048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-24211048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 24211040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-24211040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 24211030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-24211030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 25 teeth tooth width 25mm outside diameter 67,5mm SKU: 24211025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-675mm-sku-24211025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 24211024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-24211024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 22 teeth tooth width 25mm outside diameter 60mm SKU: 24211022](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-22-teeth-tooth-width-25mm-outside-diameter-60mm-sku-24211022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 24211020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-24211020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 24211018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-24211018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 100 teeth tooth width 20mm outside diameter 255mm SKU: 24210000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-100-teeth-tooth-width-20mm-outside-diameter-255mm-sku-24210000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 90 teeth tooth width 20mm outside diameter 230mm SKU: 24209000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-90-teeth-tooth-width-20mm-outside-diameter-230mm-sku-24209000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 80 teeth tooth width 20mm outside diameter 205mm SKU: 24208000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-80-teeth-tooth-width-20mm-outside-diameter-205mm-sku-24208000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 76 teeth tooth width 20mm outside diameter 195mm SKU: 24207600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-76-teeth-tooth-width-20mm-outside-diameter-195mm-sku-24207600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 70 teeth tooth width 20mm outside diameter 180mm SKU: 24207000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-70-teeth-tooth-width-20mm-outside-diameter-180mm-sku-24207000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 60 teeth tooth width 20mm outside diameter 155mm SKU: 24206000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-60-teeth-tooth-width-20mm-outside-diameter-155mm-sku-24206000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 57 teeth tooth width 20mm outside diameter 147.5mm SKU: 24205700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-57-teeth-tooth-width-20mm-outside-diameter-147-5mm-sku-24205700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 56 teeth tooth width 20mm outside diameter 145mm SKU: 24205600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-56-teeth-tooth-width-20mm-outside-diameter-145mm-sku-24205600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 54 teeth tooth width 20mm outside diameter 140mm SKU: 24205400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-54-teeth-tooth-width-20mm-outside-diameter-140mm-sku-24205400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 53 teeth tooth width 20mm outside diameter 137.5mm SKU: 24205300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-53-teeth-tooth-width-20mm-outside-diameter-137-5mm-sku-24205300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 51 teeth tooth width 20mm outside diameter 132.5mm SKU: 24205100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-51-teeth-tooth-width-20mm-outside-diameter-132-5mm-sku-24205100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 50 teeth tooth width 20mm outside diameter 130mm SKU: 24205000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-50-teeth-tooth-width-20mm-outside-diameter-130mm-sku-24205000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 49 teeth tooth width 20mm outside diameter 127.5mm SKU: 24204900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-49-teeth-tooth-width-20mm-outside-diameter-127-5mm-sku-24204900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 48 teeth tooth width 20mm outside diameter 125mm SKU: 24204800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-48-teeth-tooth-width-20mm-outside-diameter-125mm-sku-24204800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 47 teeth tooth width 20mm outside diameter 122.5mm SKU: 24204700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-47-teeth-tooth-width-20mm-outside-diameter-122-5mm-sku-24204700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 45 teeth tooth width 20mm outside diameter 117.5mm SKU: 24204500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-45-teeth-tooth-width-20mm-outside-diameter-117-5mm-sku-24204500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 44 teeth tooth width 20mm outside diameter 115mm SKU: 24204400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-44-teeth-tooth-width-20mm-outside-diameter-115mm-sku-24204400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 43 teeth tooth width 20mm outside diameter 112.5mm SKU: 24204300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-43-teeth-tooth-width-20mm-outside-diameter-112-5mm-sku-24204300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 41 teeth tooth width 20mm outside diameter 107.5mm SKU: 24204100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-41-teeth-tooth-width-20mm-outside-diameter-107-5mm-sku-24204100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 40 teeth tooth width 20mm outside diameter 105mm SKU: 24204000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-40-teeth-tooth-width-20mm-outside-diameter-105mm-sku-24204000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 39 teeth tooth width 20mm outside diameter 102.5mm SKU: 24203900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-39-teeth-tooth-width-20mm-outside-diameter-102-5mm-sku-24203900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 38 teeth tooth width 20mm outside diameter 100mm SKU: 24203800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-38-teeth-tooth-width-20mm-outside-diameter-100mm-sku-24203800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 37 teeth tooth width 20mm outside diameter 97.5mm SKU: 24203700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-37-teeth-tooth-width-20mm-outside-diameter-97-5mm-sku-24203700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 35 teeth tooth width 20mm outside diameter 92.5mm SKU: 24203500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-35-teeth-tooth-width-20mm-outside-diameter-92-5mm-sku-24203500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 34 teeth tooth width 20mm outside diameter 90mm SKU: 24203400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-34-teeth-tooth-width-20mm-outside-diameter-90mm-sku-24203400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 33 teeth tooth width 20mm outside diameter 87.5mm SKU: 24203300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-33-teeth-tooth-width-20mm-outside-diameter-87-5mm-sku-24203300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 31 teeth tooth width 20mm outside diameter 82.5mm SKU: 24203100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-31-teeth-tooth-width-20mm-outside-diameter-82-5mm-sku-24203100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 30 teeth tooth width 20mm outside diameter 80mm SKU: 24203000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-30-teeth-tooth-width-20mm-outside-diameter-80mm-sku-24203000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 29 teeth tooth width 20mm outside diameter 77.5mm SKU: 24202900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-29-teeth-tooth-width-20mm-outside-diameter-77-5mm-sku-24202900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 26 teeth tooth width 20mm outside diameter 70mm SKU: 24202600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-26-teeth-tooth-width-20mm-outside-diameter-70mm-sku-24202600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm SKU: 24202500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-25-teeth-tooth-width-20mm-outside-diameter-67-5mm-sku-24202500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 24 teeth tooth width 20mm outside diameter 65mm SKU: 24202400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-24-teeth-tooth-width-20mm-outside-diameter-65mm-sku-24202400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 23 teeth tooth width 20mm outside diameter 62.5mm SKU: 24202300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-23-teeth-tooth-width-20mm-outside-diameter-62-5mm-sku-24202300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 22 teeth tooth width 20mm outside diameter 60mm SKU: 24202200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-22-teeth-tooth-width-20mm-outside-diameter-60mm-sku-24202200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 20 teeth tooth width 20mm outside diameter 55mm SKU: 24202000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-20-teeth-tooth-width-20mm-outside-diameter-55mm-sku-24202000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 18 teeth tooth width 20mm outside diameter 50mm SKU: 24201800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-18-teeth-tooth-width-20mm-outside-diameter-50mm-sku-24201800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 120 teeth tooth width 16mm outside diameter 244mm SKU: 24112000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-120-teeth-tooth-width-16mm-outside-diameter-244mm-sku-24112000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 114 teeth tooth width 16mm outside diameter 232mm SKU: 24111400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-114-teeth-tooth-width-16mm-outside-diameter-232mm-sku-24111400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 127 teeth tooth width 20mm outside diameter 258mm SKU: 24111127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-127-teeth-tooth-width-20mm-outside-diameter-258mm-sku-24111127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 120 teeth tooth width 20mm outside diameter 244mm SKU: 24111120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-120-teeth-tooth-width-20mm-outside-diameter-244mm-sku-24111120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 114 teeth tooth width 20mm outside diameter 232mm SKU: 24111114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-114-teeth-tooth-width-20mm-outside-diameter-232mm-sku-24111114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 110 teeth tooth width 20mm outside diameter 224mm SKU: 24111110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-110-teeth-tooth-width-20mm-outside-diameter-224mm-sku-24111110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 45 teeth tooth width 50mm outside diameter 235mm SKU: 24511045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-45-teeth-tooth-width-50mm-outside-diameter-235mm-sku-24511045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 40 teeth tooth width 50mm outside diameter 210mm SKU: 24511040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-40-teeth-tooth-width-50mm-outside-diameter-210mm-sku-24511040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 38 teeth tooth width 50mm outside diameter 200mm SKU: 24511038](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-38-teeth-tooth-width-50mm-outside-diameter-200mm-sku-24511038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 35 teeth tooth width 50mm outside diameter 185mm SKU: 24511035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-35-teeth-tooth-width-50mm-outside-diameter-185mm-sku-24511035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 32 teeth tooth width 50mm outside diameter 170mm SKU: 24511032](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-32-teeth-tooth-width-50mm-outside-diameter-170mm-sku-24511032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 30 teeth tooth width 50mm outside diameter 160mm SKU: 24511030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-30-teeth-tooth-width-50mm-outside-diameter-160mm-sku-24511030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 25 teeth tooth width 50mm outside diameter 135mm SKU: 24511025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-25-teeth-tooth-width-50mm-outside-diameter-135mm-sku-24511025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 24 teeth tooth width 50mm outside diameter 130mm SKU: 24511024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-24-teeth-tooth-width-50mm-outside-diameter-130mm-sku-24511024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 20 teeth tooth width 50mm outside diameter 110mm SKU: 24511020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-20-teeth-tooth-width-50mm-outside-diameter-110mm-sku-24511020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 70 teeth tooth width 40mm outside diameter 360mm SKU: 24507000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-70-teeth-tooth-width-40mm-outside-diameter-360mm-sku-24507000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 65 teeth tooth width 40mm outside diameter 335mm SKU: 24506500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-65-teeth-tooth-width-40mm-outside-diameter-335mm-sku-24506500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 60 teeth tooth width 40mm outside diameter 310mm SKU: 24506000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-60-teeth-tooth-width-40mm-outside-diameter-310mm-sku-24506000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 52 teeth tooth width 40mm outside diameter 270mm SKU: 24505200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-52-teeth-tooth-width-40mm-outside-diameter-270mm-sku-24505200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 50 teeth tooth width 40mm outside diameter 260mm SKU: 24505000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-50-teeth-tooth-width-40mm-outside-diameter-260mm-sku-24505000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 48 teeth tooth width 40mm outside diameter 250mm SKU: 24504800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-48-teeth-tooth-width-40mm-outside-diameter-250mm-sku-24504800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 45 teeth tooth width 40mm outside diameter 235mm SKU: 24504500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-45-teeth-tooth-width-40mm-outside-diameter-235mm-sku-24504500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 40 teeth tooth width 40mm outside diameter 210mm SKU: 24504000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-40-teeth-tooth-width-40mm-outside-diameter-210mm-sku-24504000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 38 teeth tooth width 40mm outside diameter 200mm SKU: 24503800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-38-teeth-tooth-width-40mm-outside-diameter-200mm-sku-24503800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 36 teeth tooth width 40mm outside diameter 190mm SKU: 24503600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-36-teeth-tooth-width-40mm-outside-diameter-190mm-sku-24503600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 35 teeth tooth width 40mm outside diameter 185mm SKU: 24503500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-35-teeth-tooth-width-40mm-outside-diameter-185mm-sku-24503500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 30 teeth tooth width 40mm outside diameter 160mm SKU: 24503000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-30-teeth-tooth-width-40mm-outside-diameter-160mm-sku-24503000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 25 teeth tooth width 40mm outside diameter 135mm SKU: 24502500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-25-teeth-tooth-width-40mm-outside-diameter-135mm-sku-24502500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 20 teeth tooth width 40mm outside diameter 110mm SKU: 24502000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-20-teeth-tooth-width-40mm-outside-diameter-110mm-sku-24502000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 114 teeth tooth width 40mm outside diameter 464mm SKU: 24411114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-114-teeth-tooth-width-40mm-outside-diameter-464mm-sku-24411114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 110 teeth tooth width 40mm outside diameter 448mm SKU: 24411110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-110-teeth-tooth-width-40mm-outside-diameter-448mm-sku-24411110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 100 teeth tooth width 40mm outside diameter 408mm SKU: 24411100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-100-teeth-tooth-width-40mm-outside-diameter-408mm-sku-24411100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 95 teeth tooth width 40mm outside diameter 388mm SKU: 24411095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-95-teeth-tooth-width-40mm-outside-diameter-388mm-sku-24411095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 90 teeth tooth width 40mm outside diameter 368mm SKU: 24411090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-90-teeth-tooth-width-40mm-outside-diameter-368mm-sku-24411090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 85 teeth tooth width 40mm outside diameter 348mm SKU: 24411085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-85-teeth-tooth-width-40mm-outside-diameter-348mm-sku-24411085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 80 teeth tooth width 40mm outside diameter 328mm SKU: 24411080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-80-teeth-tooth-width-40mm-outside-diameter-328mm-sku-24411080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 76 teeth tooth width 40mm outside diameter 312mm SKU: 24411076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-76-teeth-tooth-width-40mm-outside-diameter-312mm-sku-24411076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 75 teeth tooth width 40mm outside diameter 308mm SKU: 24411075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-75-teeth-tooth-width-40mm-outside-diameter-308mm-sku-24411075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 70 teeth tooth width 40mm outside diameter 288mm SKU: 24411070](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-70-teeth-tooth-width-40mm-outside-diameter-288mm-sku-24411070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 65 teeth tooth width 40mm outside diameter 268mm SKU: 24411065](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-65-teeth-tooth-width-40mm-outside-diameter-268mm-sku-24411065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 24411060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-24411060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 57 teeth tooth width 40mm outside diameter 236mm SKU: 24411057](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-57-teeth-tooth-width-40mm-outside-diameter-236mm-sku-24411057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 55 teeth tooth width 40mm outside diameter 228mm SKU: 24411055](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-55-teeth-tooth-width-40mm-outside-diameter-228mm-sku-24411055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 52 teeth tooth width 40mm outside diameter 216mm SKU: 24411052](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-52-teeth-tooth-width-40mm-outside-diameter-216mm-sku-24411052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 24411050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-24411050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 48 teeth tooth width 40mm outside diameter 200mm SKU: 24411048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-48-teeth-tooth-width-40mm-outside-diameter-200mm-sku-24411048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 45 teeth tooth width 40mm outside diameter 188mm SKU: 24411045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-45-teeth-tooth-width-40mm-outside-diameter-188mm-sku-24411045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 24411040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-24411040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 38 teeth tooth width 40mm outside diameter 160mm SKU: 24411038](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-38-teeth-tooth-width-40mm-outside-diameter-160mm-sku-24411038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 24411036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-24411036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 35 teeth tooth width 40mm outside diameter 148mm SKU: 24411035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-35-teeth-tooth-width-40mm-outside-diameter-148mm-sku-24411035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 24411030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-24411030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 24411025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-24411025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 24411024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-24411024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 24411020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-24411020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 96 teeth tooth width 30mm outside diameter 392mm SKU: 24409600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-96-teeth-tooth-width-30mm-outside-diameter-392mm-sku-24409600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 90 teeth tooth width 30mm outside diameter 368mm SKU: 24409000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-90-teeth-tooth-width-30mm-outside-diameter-368mm-sku-24409000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 80 teeth tooth width 30mm outside diameter 328mm SKU: 24408000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-80-teeth-tooth-width-30mm-outside-diameter-328mm-sku-24408000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 76 teeth tooth width 30mm outside diameter 312mm SKU: 24407600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-76-teeth-tooth-width-30mm-outside-diameter-312mm-sku-24407600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 70 teeth tooth width 30mm outside diameter 288mm SKU: 24407000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-70-teeth-tooth-width-30mm-outside-diameter-288mm-sku-24407000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 67 teeth tooth width 30mm outside diameter 276mm SKU: 24406700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-67-teeth-tooth-width-30mm-outside-diameter-276mm-sku-24406700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 65 teeth tooth width 30mm outside diameter 268mm SKU: 24406500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-65-teeth-tooth-width-30mm-outside-diameter-268mm-sku-24406500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 60 teeth tooth width 30mm outside diameter 248mm SKU: 24406000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-60-teeth-tooth-width-30mm-outside-diameter-248mm-sku-24406000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 56 teeth tooth width 30mm outside diameter 232mm SKU: 24405600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-56-teeth-tooth-width-30mm-outside-diameter-232mm-sku-24405600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 52 teeth tooth width 30mm outside diameter 216mm SKU: 24405200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-52-teeth-tooth-width-30mm-outside-diameter-216mm-sku-24405200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 50 teeth tooth width 30mm outside diameter 208mm SKU: 24405000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-50-teeth-tooth-width-30mm-outside-diameter-208mm-sku-24405000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 48 teeth tooth width 30mm outside diameter 200mm SKU: 24404800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-48-teeth-tooth-width-30mm-outside-diameter-200mm-sku-24404800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 47 teeth tooth width 30mm outside diameter 196mm SKU: 24404700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-47-teeth-tooth-width-30mm-outside-diameter-196mm-sku-24404700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 46 teeth tooth width 30mm outside diameter 192mm SKU: 24404600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-46-teeth-tooth-width-30mm-outside-diameter-192mm-sku-24404600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 45 teeth tooth width 30mm outside diameter 188mm SKU: 24404500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-45-teeth-tooth-width-30mm-outside-diameter-188mm-sku-24404500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 42 teeth tooth width 30mm outside diameter 176mm SKU: 24404200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-42-teeth-tooth-width-30mm-outside-diameter-176mm-sku-24404200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 40 teeth tooth width 30mm outside diameter 168mm SKU: 24404000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-40-teeth-tooth-width-30mm-outside-diameter-168mm-sku-24404000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 38 teeth tooth width 30mm outside diameter 160mm SKU: 24403800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-38-teeth-tooth-width-30mm-outside-diameter-160mm-sku-24403800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 37 teeth tooth width 30mm outside diameter 156mm SKU: 24403700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-37-teeth-tooth-width-30mm-outside-diameter-156mm-sku-24403700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 36 teeth tooth width 30mm outside diameter 152mm SKU: 24403600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-36-teeth-tooth-width-30mm-outside-diameter-152mm-sku-24403600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 35 teeth tooth width 30mm outside diameter 148mm SKU: 24403500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-35-teeth-tooth-width-30mm-outside-diameter-148mm-sku-24403500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 30 teeth tooth width 30mm outside diameter 128mm SKU: 24403000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-30-teeth-tooth-width-30mm-outside-diameter-128mm-sku-24403000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 25 teeth tooth width 30mm outside diameter 108mm SKU: 24402500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-25-teeth-tooth-width-30mm-outside-diameter-108mm-sku-24402500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 24 teeth tooth width 30mm outside diameter 104mm SKU: 24402400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-24-teeth-tooth-width-30mm-outside-diameter-104mm-sku-24402400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 20 teeth tooth width 30mm outside diameter 88mm SKU: 24402000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-20-teeth-tooth-width-30mm-outside-diameter-88mm-sku-24402000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 114 teeth tooth width 25mm outside diameter 348mm SKU: 24311400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-114-teeth-tooth-width-25mm-outside-diameter-348mm-sku-24311400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 127 teeth tooth width 30mm outside diameter 367mm SKU: 24311127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-127-teeth-tooth-width-30mm-outside-diameter-367mm-sku-24311127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 120 teeth tooth width 30mm outside diameter 366mm SKU: 24311120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-120-teeth-tooth-width-30mm-outside-diameter-366mm-sku-24311120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 114 teeth tooth width 30mm outside diameter 348mm SKU: 24311114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-114-teeth-tooth-width-30mm-outside-diameter-348mm-sku-24311114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 110 teeth tooth width 30mm outside diameter 336mm SKU: 24311110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-110-teeth-tooth-width-30mm-outside-diameter-336mm-sku-24311110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 100 teeth tooth width 30mm outside diameter 306mm SKU: 24311100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-100-teeth-tooth-width-30mm-outside-diameter-306mm-sku-24311100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 95 teeth tooth width 30mm outside diameter 291mm SKU: 24311095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-95-teeth-tooth-width-30mm-outside-diameter-291mm-sku-24311095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 90 teeth tooth width 30mm outside diameter 276mm SKU: 24311090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-90-teeth-tooth-width-30mm-outside-diameter-276mm-sku-24311090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 85 teeth tooth width 30mm outside diameter 261mm SKU: 24311085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-85-teeth-tooth-width-30mm-outside-diameter-261mm-sku-24311085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 80 teeth tooth width 30mm outside diameter 246mm SKU: 24311080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-80-teeth-tooth-width-30mm-outside-diameter-246mm-sku-24311080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 76 teeth tooth width 30mm outside diameter 234mm SKU: 24311076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-76-teeth-tooth-width-30mm-outside-diameter-234mm-sku-24311076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 75 teeth tooth width 30mm outside diameter 231mm SKU: 24311075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-75-teeth-tooth-width-30mm-outside-diameter-231mm-sku-24311075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 72 teeth tooth width 30mm outside diameter 222mm SKU: 24311072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-72-teeth-tooth-width-30mm-outside-diameter-222mm-sku-24311072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 70 teeth tooth width 30mm outside diameter 216mm SKU: 24311070](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-70-teeth-tooth-width-30mm-outside-diameter-216mm-sku-24311070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 65 teeth tooth width 30mm outside diameter 201mm SKU: 24311065](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-65-teeth-tooth-width-30mm-outside-diameter-201mm-sku-24311065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 24311060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-24311060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 57 teeth tooth width 30mm outside diameter 177mm SKU: 24311057](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-57-teeth-tooth-width-30mm-outside-diameter-177mm-sku-24311057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 55 teeth tooth width 30mm outside diameter 171mm SKU: 24311055](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-55-teeth-tooth-width-30mm-outside-diameter-171mm-sku-24311055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 52 teeth tooth width 30mm outside diameter 162mm SKU: 24311052](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-52-teeth-tooth-width-30mm-outside-diameter-162mm-sku-24311052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 24311050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-24311050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 24311048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-24311048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 24311040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-24311040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 24311030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-24311030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 24311025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-24311025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 24311024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-24311024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 24311020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-24311020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Worm wheel made of bronze module 2 20 teeth double-thread right hand SKU: 30150700](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-20-teeth-double-thread-right-hand-sku-30150700/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 16 teeth double-thread right hand SKU: 30150500](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-16-teeth-double-thread-right-hand-sku-30150500/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 60 teeth single-thread right hand SKU: 30132400](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-60-teeth-single-thread-right-hand-sku-30132400/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 50 teeth single-thread right hand SKU: 30132000](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-50-teeth-single-thread-right-hand-sku-30132000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 40 teeth single-thread right hand SKU: 30131800](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-40-teeth-single-thread-right-hand-sku-30131800/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 30 teeth single-thread right hand SKU: 30131300](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-30-teeth-single-thread-right-hand-sku-30131300/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 20 teeth single-thread right hand SKU: 30130700](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-20-teeth-single-thread-right-hand-sku-30130700/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 18 teeth single-thread right hand SKU: 30130600](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-18-teeth-single-thread-right-hand-sku-30130600/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 16 teeth single-thread right hand SKU: 30130500](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-16-teeth-single-thread-right-hand-sku-30130500/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 1.5 100 teeth double-thread right hand SKU: 30123200](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-100-teeth-double-thread-right-hand-sku-30123200/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 50 teeth double-thread right hand SKU: 30122000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-50-teeth-double-thread-right-hand-sku-30122000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 40 teeth double-thread right hand SKU: 30121800](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-40-teeth-double-thread-right-hand-sku-30121800/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 30 teeth double-thread right hand SKU: 30121300](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-30-teeth-double-thread-right-hand-sku-30121300/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 20 teeth double-thread right hand SKU: 30120700](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-20-teeth-double-thread-right-hand-sku-30120700/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 18 teeth double-thread right hand SKU: 30120600](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-18-teeth-double-thread-right-hand-sku-30120600/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 16 teeth double-thread right hand SKU: 30120500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-16-teeth-double-thread-right-hand-sku-30120500/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze, module 1.5 100 teeth single-thread right hand SKU: 30103200](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-100-teeth-single-thread-right-hand-sku-30103200/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 75 teeth single-thread right hand SKU: 30103000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-75-teeth-single-thread-right-hand-sku-30103000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 50 teeth single-thread right hand SKU: 30102000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-50-teeth-single-thread-right-hand-sku-30102000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 40 teeth single-thread right hand SKU: 30101800](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-40-teeth-single-thread-right-hand-sku-30101800/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 30 teeth single-thread right hand SKU: 30101300](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-30-teeth-single-thread-right-hand-sku-30101300/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 20 teeth single-thread right hand SKU: 30100700](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-20-teeth-single-thread-right-hand-sku-30100700/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 18 teeth single-thread right hand SKU: 30100600](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-18-teeth-single-thread-right-hand-sku-30100600/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 16 teeth single-thread right hand SKU: 30100500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-16-teeth-single-thread-right-hand-sku-30100500/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze module 1 100 teeth double-thread right hand SKU: 30083200](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-100-teeth-double-thread-right-hand-sku-30083200/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 75 teeth double-thread right hand SKU: 30083000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-75-teeth-double-thread-right-hand-sku-30083000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 50 teeth double-thread right hand SKU: 30082000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-50-teeth-double-thread-right-hand-sku-30082000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 35 teeth double-thread right hand SKU: 30081500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-35-teeth-double-thread-right-hand-sku-30081500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 25 teeth double-thread right hand SKU: 30081000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-25-teeth-double-thread-right-hand-sku-30081000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 20 teeth double-thread right hand SKU: 30080700](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-20-teeth-double-thread-right-hand-sku-30080700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 16 teeth double-thread right hand SKU: 30080500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-16-teeth-double-thread-right-hand-sku-30080500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 150 teeth single-thread right hand SKU: 30064000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-150-teeth-single-thread-right-hand-sku-30064000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 125 teeth single-thread right hand SKU: 30063500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-125-teeth-single-thread-right-hand-sku-30063500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 100 teeth single-thread right hand SKU: 30063200](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-100-teeth-single-thread-right-hand-sku-30063200/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 75 teeth single-thread right hand SKU: 30063000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-75-teeth-single-thread-right-hand-sku-30063000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 50 teeth single-thread right hand SKU: 30062000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-50-teeth-single-thread-right-hand-sku-30062000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 35 teeth single-thread right hand SKU: 30061500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-35-teeth-single-thread-right-hand-sku-30061500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 25 teeth single-thread right hand SKU: 30061000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-25-teeth-single-thread-right-hand-sku-30061000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 20 teeth single-thread right hand SKU: 30060700](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-20-teeth-single-thread-right-hand-sku-30060700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 16 teeth single-thread right hand SKU: 30060500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-16-teeth-single-thread-right-hand-sku-30060500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 0.75 75 teeth double-thread right hand SKU: 30053000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-75-teeth-double-thread-right-hand-sku-30053000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,73. Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 50 teeth double-thread right hand SKU: 30052000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-50-teeth-double-thread-right-hand-sku-30052000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,73. Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 25 teeth double-thread right hand SKU: 30051000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-25-teeth-double-thread-right-hand-sku-30051000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,73. Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 20 teeth double-thread right hand SKU: 30050700](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-20-teeth-double-thread-right-hand-sku-30050700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,73. Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 100 teeth single-thread right hand SKU: 30033200](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-100-teeth-single-thread-right-hand-sku-30033200/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 75 teeth single-thread right hand SKU: 30033000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-75-teeth-single-thread-right-hand-sku-30033000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 50 teeth single-thread right hand SKU: 30032000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-50-teeth-single-thread-right-hand-sku-30032000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 25 teeth single-thread right hand SKU: 30031000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-25-teeth-single-thread-right-hand-sku-30031000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 20 teeth single-thread right hand SKU: 30030700](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-20-teeth-single-thread-right-hand-sku-30030700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 75 teeth double-thread right hand SKU: 30023000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-75-teeth-double-thread-right-hand-sku-30023000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 50 teeth double-thread right hand SKU: 30022000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-50-teeth-double-thread-right-hand-sku-30022000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 25 teeth double-thread right hand SKU: 30021000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-25-teeth-double-thread-right-hand-sku-30021000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 20 teeth double-thread right hand SKU: 30020700](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-20-teeth-double-thread-right-hand-sku-30020700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 100 teeth single-thread right hand SKU: 30003200](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-100-teeth-single-thread-right-hand-sku-30003200/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 75 teeth single-thread right hand SKU: 30003000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-75-teeth-single-thread-right-hand-sku-30003000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 50 teeth single-thread right hand SKU: 30002000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-50-teeth-single-thread-right-hand-sku-30002000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 25 teeth single-thread right hand SKU: 30001000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-25-teeth-single-thread-right-hand-sku-30001000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 20 teeth single-thread right hand SKU: 30000700](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-20-teeth-single-thread-right-hand-sku-30000700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Spur gear made of steel C45 without hub module 6 60 teeth tooth width 60mm outside diameter 372mm SKU: 24611060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-60-teeth-tooth-width-60mm-outside-diameter-372mm-sku-24611060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 50 teeth tooth width 60mm outside diameter 312mm SKU: 24611050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-50-teeth-tooth-width-60mm-outside-diameter-312mm-sku-24611050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 40 teeth tooth width 60mm outside diameter 252mm SKU: 24611040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-40-teeth-tooth-width-60mm-outside-diameter-252mm-sku-24611040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 38 teeth tooth width 60mm outside diameter 240mm SKU: 24611038](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-38-teeth-tooth-width-60mm-outside-diameter-240mm-sku-24611038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 36 teeth tooth width 60mm outside diameter 228mm SKU: 24611036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-36-teeth-tooth-width-60mm-outside-diameter-228mm-sku-24611036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 35 teeth tooth width 60mm outside diameter 222mm SKU: 24611035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-35-teeth-tooth-width-60mm-outside-diameter-222mm-sku-24611035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 32 teeth tooth width 60mm outside diameter 204mm SKU: 24611032](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-32-teeth-tooth-width-60mm-outside-diameter-204mm-sku-24611032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 30 teeth tooth width 60mm outside diameter 192mm SKU: 24611030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-30-teeth-tooth-width-60mm-outside-diameter-192mm-sku-24611030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 28 teeth tooth width 60mm outside diameter 180mm SKU: 24611028](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-28-teeth-tooth-width-60mm-outside-diameter-180mm-sku-24611028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 25 teeth tooth width 60mm outside diameter 162mm SKU: 24611025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-25-teeth-tooth-width-60mm-outside-diameter-162mm-sku-24611025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 24 teeth tooth width 60mm outside diameter 156mm SKU: 24611024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-24-teeth-tooth-width-60mm-outside-diameter-156mm-sku-24611024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 20 teeth tooth width 60mm outside diameter 132mm SKU: 24611020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-20-teeth-tooth-width-60mm-outside-diameter-132mm-sku-24611020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 60 teeth tooth width 50mm outside diameter 372mm SKU: 24606000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-60-teeth-tooth-width-50mm-outside-diameter-372mm-sku-24606000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 56 teeth tooth width 50mm outside diameter 348mm SKU: 24605600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-56-teeth-tooth-width-50mm-outside-diameter-348mm-sku-24605600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 52 teeth tooth width 50mm outside diameter 324mm SKU: 24605200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-52-teeth-tooth-width-50mm-outside-diameter-324mm-sku-24605200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 50 teeth tooth width 50mm outside diameter 312mm SKU: 24605000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-50-teeth-tooth-width-50mm-outside-diameter-312mm-sku-24605000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 48 teeth tooth width 50mm outside diameter 300mm SKU: 24604800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-48-teeth-tooth-width-50mm-outside-diameter-300mm-sku-24604800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 45 teeth tooth width 50mm outside diameter 282mm SKU: 24604500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-45-teeth-tooth-width-50mm-outside-diameter-282mm-sku-24604500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 40 teeth tooth width 50mm outside diameter 252mm SKU: 24604000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-40-teeth-tooth-width-50mm-outside-diameter-252mm-sku-24604000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 36 teeth tooth width 50mm outside diameter 228mm SKU: 24603600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-36-teeth-tooth-width-50mm-outside-diameter-228mm-sku-24603600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 35 teeth tooth width 50mm outside diameter 222mm SKU: 24603500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-35-teeth-tooth-width-50mm-outside-diameter-222mm-sku-24603500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 30 teeth tooth width 50mm outside diameter 192mm SKU: 24603000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-30-teeth-tooth-width-50mm-outside-diameter-192mm-sku-24603000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 25 teeth tooth width 50mm outside diameter 162mm SKU: 24602500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-25-teeth-tooth-width-50mm-outside-diameter-162mm-sku-24602500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 24 teeth tooth width 50mm outside diameter 156mm SKU: 24602400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-24-teeth-tooth-width-50mm-outside-diameter-156mm-sku-24602400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 20 teeth tooth width 50mm outside diameter 132mm SKU: 24602000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-20-teeth-tooth-width-50mm-outside-diameter-132mm-sku-24602000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 114 teeth tooth width 50mm outside diameter 580mm SKU: 24511114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-114-teeth-tooth-width-50mm-outside-diameter-580mm-sku-24511114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 110 teeth tooth width 50mm outside diameter 560mm SKU: 24511110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-110-teeth-tooth-width-50mm-outside-diameter-560mm-sku-24511110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 100 teeth tooth width 50mm outside diameter 510mm SKU: 24511100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-100-teeth-tooth-width-50mm-outside-diameter-510mm-sku-24511100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 95 teeth tooth width 50mm outside diameter 485mm SKU: 24511095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-95-teeth-tooth-width-50mm-outside-diameter-485mm-sku-24511095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 90 teeth tooth width 50mm outside diameter 460mm SKU: 24511090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-90-teeth-tooth-width-50mm-outside-diameter-460mm-sku-24511090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 85 teeth tooth width 50mm outside diameter 435mm SKU: 24511085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-85-teeth-tooth-width-50mm-outside-diameter-435mm-sku-24511085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 80 teeth tooth width 50mm outside diameter 410mm SKU: 24511080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-80-teeth-tooth-width-50mm-outside-diameter-410mm-sku-24511080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 76 teeth tooth width 50mm outside diameter 390mm SKU: 24511076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-76-teeth-tooth-width-50mm-outside-diameter-390mm-sku-24511076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 75 teeth tooth width 50mm outside diameter 385mm SKU: 24511075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-75-teeth-tooth-width-50mm-outside-diameter-385mm-sku-24511075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 70 teeth tooth width 50mm outside diameter 360mm SKU: 24511070](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-70-teeth-tooth-width-50mm-outside-diameter-360mm-sku-24511070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 65 teeth tooth width 50mm outside diameter 335mm SKU: 24511065](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-65-teeth-tooth-width-50mm-outside-diameter-335mm-sku-24511065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 60 teeth tooth width 50mm outside diameter 310mm SKU: 24511060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-60-teeth-tooth-width-50mm-outside-diameter-310mm-sku-24511060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 57 teeth tooth width 50mm outside diameter 295mm SKU: 24511057](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-57-teeth-tooth-width-50mm-outside-diameter-295mm-sku-24511057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 55 teeth tooth width 50mm outside diameter 285mm SKU: 24511055](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-55-teeth-tooth-width-50mm-outside-diameter-285mm-sku-24511055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 52 teeth tooth width 50mm outside diameter 270mm SKU: 24511052](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-52-teeth-tooth-width-50mm-outside-diameter-270mm-sku-24511052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 50 teeth tooth width 50mm outside diameter 260mm SKU: 24511050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-50-teeth-tooth-width-50mm-outside-diameter-260mm-sku-24511050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 48 teeth tooth width 50mm outside diameter 250mm SKU: 24511048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-48-teeth-tooth-width-50mm-outside-diameter-250mm-sku-24511048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Precision worm wheel centre distance 31mm i=7 28 teeth SKU: 32100700](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i7-28-teeth-sku-32100700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=5 30 teeth SKU: 32100500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i5-30-teeth-sku-32100500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=2.5 25 teeth SKU: 32100200](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i2-5-25-teeth-sku-32100200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=50 SKU: 32075000](https://maedler.in/product/precision-worm-centre-distance-25mm-i50-sku-32075000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=40 SKU: 32074000](https://maedler.in/product/precision-worm-centre-distance-25mm-i40-sku-32074000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=30 SKU: 32073000](https://maedler.in/product/precision-worm-centre-distance-25mm-i30-sku-32073000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=25 SKU: 32072500](https://maedler.in/product/precision-worm-centre-distance-25mm-i25-sku-32072500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=20 SKU: 32072000](https://maedler.in/product/precision-worm-centre-distance-25mm-i20-sku-32072000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=15 SKU: 32071500](https://maedler.in/product/precision-worm-centre-distance-25mm-i15-sku-32071500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=10 SKU: 32071000](https://maedler.in/product/precision-worm-centre-distance-25mm-i10-sku-32071000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=6.5 SKU: 32070600](https://maedler.in/product/precision-worm-centre-distance-25mm-i6-5-sku-32070600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=5 SKU: 32070500](https://maedler.in/product/precision-worm-centre-distance-25mm-i5-sku-32070500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=4 SKU: 32070400](https://maedler.in/product/precision-worm-centre-distance-25mm-i4-sku-32070400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=50 50 teeth SKU: 32065000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i50-50-teeth-sku-32065000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=40 40 teeth SKU: 32064000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i40-40-teeth-sku-32064000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=30 30 teeth SKU: 32063000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i30-30-teeth-sku-32063000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=25 25 teeth SKU: 32062500](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i25-25-teeth-sku-32062500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=20 20 teeth SKU: 32062000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i20-20-teeth-sku-32062000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=15 30 teeth SKU: 32061500](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i15-30-teeth-sku-32061500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=10 20 teeth SKU: 32061000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i10-20-teeth-sku-32061000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=6.5 26 teeh SKU: 32060600](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i6-5-26-teeh-sku-32060600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=5 20 teeth SKU: 32060500](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i5-20-teeth-sku-32060500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=4 20 teeth SKU: 32060400](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i4-20-teeth-sku-32060400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=40 SKU: 32044000](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i40-sku-32044000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=30 SKU: 32043000](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i30-sku-32043000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=21 SKU: 32042100](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i21-sku-32042100/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=10.5 SKU: 32041000](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i10-5-sku-32041000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=7 SKU: 32040700](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i7-sku-32040700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=4 SKU: 32040400](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i4-sku-32040400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=3 SKU: 32040300](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i3-sku-32040300/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=40 40 teeth SKU: 32034000](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i40-40-teeth-sku-32034000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=30 30 teeth SKU: 32033000](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i30-30-teeth-sku-32033000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=21 21 teeth SKU: 32032100](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i21-21-teeth-sku-32032100/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=10.5 21 teeth SKU: 32031000](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i10-5-21-teeth-sku-32031000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=7 21 teeth SKU: 32030700](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i7-21-teeth-sku-32030700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=4 20 teeth SKU: 32030400](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i4-20-teeth-sku-32030400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=3 21 teeth SKU: 32030300](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i3-21-teeth-sku-32030300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=80 SKU: 32018000](https://maedler.in/product/precision-worm-centre-distance-17mm-i80-sku-32018000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=75 SKU: 32017500](https://maedler.in/product/precision-worm-centre-distance-17mm-i75-sku-32017500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=60 SKU: 32016000](https://maedler.in/product/precision-worm-centre-distance-17mm-i60-sku-32016000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=50 SKU: 32015000](https://maedler.in/product/precision-worm-centre-distance-17mm-i50-sku-32015000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=40 SKU: 32014000](https://maedler.in/product/precision-worm-centre-distance-17mm-i40-sku-32014000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=30 SKU: 32013000](https://maedler.in/product/precision-worm-centre-distance-17mm-i30-sku-32013000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=25 SKU: 32012500](https://maedler.in/product/precision-worm-centre-distance-17mm-i25-sku-32012500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=15 SKU: 32011500](https://maedler.in/product/precision-worm-centre-distance-17mm-i15-sku-32011500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=10 SKU: 32011000](https://maedler.in/product/precision-worm-centre-distance-17mm-i10-sku-32011000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=9 SKU: 32010900](https://maedler.in/product/precision-worm-centre-distance-17mm-i9-sku-32010900/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=7 SKU: 32010700](https://maedler.in/product/precision-worm-centre-distance-17mm-i7-sku-32010700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=5 SKU: 32010500](https://maedler.in/product/precision-worm-centre-distance-17mm-i5-sku-32010500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=4.5 SKU: 32010400](https://maedler.in/product/precision-worm-centre-distance-17mm-i4-5-sku-32010400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=2.25 SKU: 32010200](https://maedler.in/product/precision-worm-centre-distance-17mm-i2-25-sku-32010200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=80 80 teeth SKU: 32008000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i80-80-teeth-sku-32008000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=75 75 teeth SKU: 32007500](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i75-75-teeth-sku-32007500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=60 60 teeth SKU: 32006000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i60-60-teeth-sku-32006000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=50 50 teeth SKU: 32005000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i50-50-teeth-sku-32005000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=40 40 teeth SKU: 32004000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i40-40-teeth-sku-32004000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=30 30 teeth SKU: 32003000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i30-30-teeth-sku-32003000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=25 25 teeth SKU: 32002500](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i25-25-teeth-sku-32002500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=15 30 teeth SKU: 32001500](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i15-30-teeth-sku-32001500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=10 30 teeth SKU: 32001000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i10-30-teeth-sku-32001000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=9 27 teeth SKU: 32000900](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i9-27-teeth-sku-32000900/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=7 21 teeth SKU: 32000700](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i7-21-teeth-sku-32000700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=5 30 teeth SKU: 32000500](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i5-30-teeth-sku-32000500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=4.5 27 teeth SKU: 32000400](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i4-5-27-teeth-sku-32000400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=2.25 18 teeth SKU: 32000200](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i2-25-18-teeth-sku-32000200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Worm wheel made of cast iron GG25 module 5 65 teeth single-thread right hand SKU: 31062600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-65-teeth-single-thread-right-hand-sku-31062600/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 52 teeth single-thread right hand SKU: 31062100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-52-teeth-single-thread-right-hand-sku-31062100/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 40 teeth single-thread right hand SKU: 31061800](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-40-teeth-single-thread-right-hand-sku-31061800/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 32 teeth single-thread right hand SKU: 31061400](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-32-teeth-single-thread-right-hand-sku-31061400/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 26 teeth single-thread right hand SKU: 31061100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-26-teeth-single-thread-right-hand-sku-31061100/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 16 teeth single-thread right hand SKU: 31060500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-16-teeth-single-thread-right-hand-sku-31060500/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 26 teeth double-thread right hand SKU: 31051100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-26-teeth-double-thread-right-hand-sku-31051100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,67. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 20 teeth double-thread right hand SKU: 31050700](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-20-teeth-double-thread-right-hand-sku-31050700/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,67. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 16 teeth double-thread right hand SKU: 31050500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-16-teeth-double-thread-right-hand-sku-31050500/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,67. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 65 teeth single-thread right hand SKU: 31032600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-65-teeth-single-thread-right-hand-sku-31032600/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 52 teeth single-thread right hand SKU: 31032100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-52-teeth-single-thread-right-hand-sku-31032100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 40 teeth single-thread right hand SKU: 31031800](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-40-teeth-single-thread-right-hand-sku-31031800/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 32 teeth single-thread right hand SKU: 31031400](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-32-teeth-single-thread-right-hand-sku-31031400/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 26 teeth single-thread right hand SKU: 31031100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-26-teeth-single-thread-right-hand-sku-31031100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 20 teeth single-thread right hand SKU: 31030700](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-20-teeth-single-thread-right-hand-sku-31030700/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 18 teeth single-thread right hand SKU: 31030600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-18-teeth-single-thread-right-hand-sku-31030600/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 16 teeth single-thread right hand SKU: 31030500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-16-teeth-single-thread-right-hand-sku-31030500/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 65 teeth double-thread right hand SKU: 31022600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-65-teeth-double-thread-right-hand-sku-31022600/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 52 teeth double-thread right hand SKU: 31022100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-52-teeth-double-thread-right-hand-sku-31022100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 32 teeth double-thread right hand SKU: 31021400](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-32-teeth-double-thread-right-hand-sku-31021400/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 26 teeth double-thread right hand SKU: 31021100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-26-teeth-double-thread-right-hand-sku-31021100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 20 teeth double-thread right hand SKU: 31020700](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-20-teeth-double-thread-right-hand-sku-31020700/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 16 teeth double-thread right hand SKU: 31020500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-16-teeth-double-thread-right-hand-sku-31020500/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 65 teeth single-thread right hand SKU: 31002600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-65-teeth-single-thread-right-hand-sku-31002600/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 52 teeth single-thread right hand SKU: 31002100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-52-teeth-single-thread-right-hand-sku-31002100/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 40 teeth single-thread right hand SKU: 31001800](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-40-teeth-single-thread-right-hand-sku-31001800/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 32 teeth single-thread right hand SKU: 31001400](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-32-teeth-single-thread-right-hand-sku-31001400/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 26 teeth single-thread right hand SKU: 31001100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-26-teeth-single-thread-right-hand-sku-31001100/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 20 teeth single-thread right hand SKU: 31000700](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-20-teeth-single-thread-right-hand-sku-31000700/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 18 teeth single-thread right hand SKU: 31000600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-18-teeth-single-thread-right-hand-sku-31000600/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 16 teeth single-thread right hand SKU: 31000500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-16-teeth-single-thread-right-hand-sku-31000500/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of bronze module 2 60 teeth double-thread right hand SKU: 30152400](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-60-teeth-double-thread-right-hand-sku-30152400/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 50 teeth double-thread right hand SKU: 30152000](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-50-teeth-double-thread-right-hand-sku-30152000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 40 teeth double-thread right hand SKU: 30151800](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-40-teeth-double-thread-right-hand-sku-30151800/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 30 teeth double-thread right hand SKU: 30151300](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-30-teeth-double-thread-right-hand-sku-30151300/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Precision worm centre distance 35mm i=7.25 SKU: 32210700](https://maedler.in/product/precision-worm-centre-distance-35mm-i7-25-sku-32210700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=5 SKU: 32210500](https://maedler.in/product/precision-worm-centre-distance-35mm-i5-sku-32210500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=2.78 SKU: 32210200](https://maedler.in/product/precision-worm-centre-distance-35mm-i2-78-sku-32210200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=90 90 teeth SKU: 32209000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i90-90-teeth-sku-32209000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=58 58 teeth SKU: 32205800](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i58-58-teeth-sku-32205800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=50 50 teeth SKU: 32205000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i50-50-teeth-sku-32205000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=40 40 teeth SKU: 32204000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i40-40-teeth-sku-32204000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=30 30 teeth SKU: 32203000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i30-30-teeth-sku-32203000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=25 50 teeth SKU: 32202500](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i25-50-teeth-sku-32202500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=20 40 teeth SKU: 32202000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i20-40-teeth-sku-32202000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=15 30 teeth SKU: 32201500](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i15-30-teeth-sku-32201500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=12 24 teeth SKU: 32201200](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i12-24-teeth-sku-32201200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=10 30 teeth SKU: 32201000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i10-30-teeth-sku-32201000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=8 24 teeth SKU: 32200800](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i8-24-teeth-sku-32200800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=7.25 29 teeth SKU: 32200700](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i7-25-29-teeth-sku-32200700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=5 25 teeth SKU: 32200500](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i5-25-teeth-sku-32200500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=2.78 25 teeth SKU: 32200200](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i2-78-25-teeth-sku-32200200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=75 SKU: 32147500](https://maedler.in/product/precision-worm-centre-distance-33mm-i75-sku-32147500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=56 SKU: 32145600](https://maedler.in/product/precision-worm-centre-distance-33mm-i56-sku-32145600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=50 SKU: 32145000](https://maedler.in/product/precision-worm-centre-distance-33mm-i50-sku-32145000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=38 SKU: 32143800](https://maedler.in/product/precision-worm-centre-distance-33mm-i38-sku-32143800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=32 SKU: 32143200](https://maedler.in/product/precision-worm-centre-distance-33mm-i32-sku-32143200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=30 SKU: 32143000](https://maedler.in/product/precision-worm-centre-distance-33mm-i30-sku-32143000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=28 SKU: 32142800](https://maedler.in/product/precision-worm-centre-distance-33mm-i28-sku-32142800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=24 SKU: 32142400](https://maedler.in/product/precision-worm-centre-distance-33mm-i24-sku-32142400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=20 SKU: 32142000](https://maedler.in/product/precision-worm-centre-distance-33mm-i20-sku-32142000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=18 SKU: 32141800](https://maedler.in/product/precision-worm-centre-distance-33mm-i18-sku-32141800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=17 SKU: 32141700](https://maedler.in/product/precision-worm-centre-distance-33mm-i17-sku-32141700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=16 SKU: 32141600](https://maedler.in/product/precision-worm-centre-distance-33mm-i16-sku-32141600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=15 SKU: 32141500](https://maedler.in/product/precision-worm-centre-distance-33mm-i15-sku-32141500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=14 SKU: 32141400](https://maedler.in/product/precision-worm-centre-distance-33mm-i14-sku-32141400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=12 SKU: 32141200](https://maedler.in/product/precision-worm-centre-distance-33mm-i12-sku-32141200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=10 SKU: 32141000](https://maedler.in/product/precision-worm-centre-distance-33mm-i10-sku-32141000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=7 SKU: 32140700](https://maedler.in/product/precision-worm-centre-distance-33mm-i7-sku-32140700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=5 SKU: 32140500](https://maedler.in/product/precision-worm-centre-distance-33mm-i5-sku-32140500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=3.5 SKU: 32140300](https://maedler.in/product/precision-worm-centre-distance-33mm-i3-5-sku-32140300/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=75 75 teeth SKU: 32137500](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i75-75-teeth-sku-32137500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=56 56 teeth SKU: 32135600](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i56-56-teeth-sku-32135600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=50 50 teeth SKU: 32135000](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i50-50-teeth-sku-32135000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=38 38 teeth SKU: 32133800](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i38-38-teeth-sku-32133800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=32 32 teeth SKU: 32133200](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i32-32-teeth-sku-32133200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=30 30 teeth SKU: 32133000](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i30-30-teeth-sku-32133000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=28 28 teeth SKU: 32132800](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i28-28-teeth-sku-32132800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=24 24 teeth SKU: 32132400](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i24-24-teeth-sku-32132400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=20 40 teeth SKU: 32132000](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i20-40-teeth-sku-32132000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=18 36 teeth SKU: 32131800](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i18-36-teeth-sku-32131800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=17 34 teeth SKU: 32131700](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i17-34-teeth-sku-32131700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=16 32 teeth SKU: 32131600](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i16-32-teeth-sku-32131600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=15 30 teeth SKU: 32131500](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i15-30-teeth-sku-32131500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=14 28 teeth SKU: 32131400](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i14-28-teeth-sku-32131400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=12 24 teeth SKU: 32131200](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i12-24-teeth-sku-32131200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=10 30 teeth SKU: 32131000](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i10-30-teeth-sku-32131000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=7 28 teeth SKU: 32130700](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i7-28-teeth-sku-32130700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=5 20 teeth SKU: 32130500](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i5-20-teeth-sku-32130500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=3.5 21 teeth SKU: 32130300](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i3-5-21-teeth-sku-32130300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=100 SKU: 32120000](https://maedler.in/product/precision-worm-centre-distance-31mm-i100-sku-32120000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=90 SKU: 32119000](https://maedler.in/product/precision-worm-centre-distance-31mm-i90-sku-32119000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=75 SKU: 32117500](https://maedler.in/product/precision-worm-centre-distance-31mm-i75-sku-32117500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=70 SKU: 32117000](https://maedler.in/product/precision-worm-centre-distance-31mm-i70-sku-32117000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=60 SKU: 32116000](https://maedler.in/product/precision-worm-centre-distance-31mm-i60-sku-32116000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=55 SKU: 32115500](https://maedler.in/product/precision-worm-centre-distance-31mm-i55-sku-32115500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=50 SKU: 32115000](https://maedler.in/product/precision-worm-centre-distance-31mm-i50-sku-32115000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=45 SKU: 32114500](https://maedler.in/product/precision-worm-centre-distance-31mm-i45-sku-32114500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=38 SKU: 32113800](https://maedler.in/product/precision-worm-centre-distance-31mm-i38-sku-32113800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=30 SKU: 32113000](https://maedler.in/product/precision-worm-centre-distance-31mm-i30-sku-32113000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=28 SKU: 32112800](https://maedler.in/product/precision-worm-centre-distance-31mm-i28-sku-32112800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=25 SKU: 32112500](https://maedler.in/product/precision-worm-centre-distance-31mm-i25-sku-32112500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=24 SKU: 32112400](https://maedler.in/product/precision-worm-centre-distance-31mm-i24-sku-32112400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=23 SKU: 32112300](https://maedler.in/product/precision-worm-centre-distance-31mm-i23-sku-32112300/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=22 SKU: 32112200](https://maedler.in/product/precision-worm-centre-distance-31mm-i22-sku-32112200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=20 SKU: 32112000](https://maedler.in/product/precision-worm-centre-distance-31mm-i20-sku-32112000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=18 SKU: 32111800](https://maedler.in/product/precision-worm-centre-distance-31mm-i18-sku-32111800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=15 SKU: 32111500](https://maedler.in/product/precision-worm-centre-distance-31mm-i15-sku-32111500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=12 SKU: 32111200](https://maedler.in/product/precision-worm-centre-distance-31mm-i12-sku-32111200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=10 SKU: 32111000](https://maedler.in/product/precision-worm-centre-distance-31mm-i10-sku-32111000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=8.33 SKU: 32110800](https://maedler.in/product/precision-worm-centre-distance-31mm-i8-33-sku-32110800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=7 SKU: 32110700](https://maedler.in/product/precision-worm-centre-distance-31mm-i7-sku-32110700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=5 SKU: 32110500](https://maedler.in/product/precision-worm-centre-distance-31mm-i5-sku-32110500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=2.5 SKU: 32110200](https://maedler.in/product/precision-worm-centre-distance-31mm-i2-5-sku-32110200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=100 100 teeth SKU: 32110000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i100-100-teeth-sku-32110000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=90 90 teeth SKU: 32109000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i90-90-teeth-sku-32109000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=75 75 teeth SKU: 32107500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i75-75-teeth-sku-32107500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=70 70 teeth SKU: 32107000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i70-70-teeth-sku-32107000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=60 60 teeth SKU: 32106000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i60-60-teeth-sku-32106000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=55 55 teeth SKU: 32105500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i55-55-teeth-sku-32105500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=50 50 teeth SKU: 32105000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i50-50-teeth-sku-32105000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=45 45 teeth SKU: 32104500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i45-45-teeth-sku-32104500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=38 38 teeth SKU: 32103800](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i38-38-teeth-sku-32103800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=30 30 teeth SKU: 32103000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i30-30-teeth-sku-32103000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=28 28 teeth SKU: 32102800](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i28-28-teeth-sku-32102800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=25 25 teeth SKU: 32102500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i25-25-teeth-sku-32102500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=24 24 teeth SKU: 32102400](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i24-24-teeth-sku-32102400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=23 23 teeth SKU: 32102300](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i23-23-teeth-sku-32102300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=22 44 teeth SKU: 32102200](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i22-44-teeth-sku-32102200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=20 60 teeth SKU: 32102000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i20-60-teeth-sku-32102000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=18 36 teeth SKU: 32101800](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i18-36-teeth-sku-32101800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=15 30 teeth SKU: 32101500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i15-30-teeth-sku-32101500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=12 36 teeth SKU: 32101200](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i12-36-teeth-sku-32101200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=10 30 teeth SKU: 32101000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i10-30-teeth-sku-32101000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=8.33 25 teeth SKU: 32100800](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i8-33-25-teeth-sku-32100800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 63mm i=34 SKU: 33043400](https://maedler.in/product/precision-worm-centre-distance-63mm-i34-sku-33043400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 63mm i=19 SKU: 33041900](https://maedler.in/product/precision-worm-centre-distance-63mm-i19-sku-33041900/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=70 70 teeth SKU: 33037000](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i70-70-teeth-sku-33037000/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=63 63 teeth SKU: 33036300](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i63-63-teeth-sku-33036300/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=48 48 teeth SKU: 33034800](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i48-48-teeth-sku-33034800/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=34 34 teeth SKU: 33033400](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i34-34-teeth-sku-33033400/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=26 26 teeth SKU: 33032600](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i26-26-teeth-sku-33032600/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=19 38 teeth SKU: 33031900](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i19-38-teeth-sku-33031900/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=12 36 teeth SKU: 33031200](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i12-36-teeth-sku-33031200/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=6 24 teeth SKU: 33030600](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i6-24-teeth-sku-33030600/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=69 69 teeth SKU: 33006900](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i69-69-teeth-sku-33006900/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=55 55 teeth SKU: 33005500](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i55-55-teeth-sku-33005500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=46 46 teeth SKU: 33004600](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i46-46-teeth-sku-33004600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=35 35 teeth SKU: 33003500](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i35-35-teeth-sku-33003500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=27 27 teeth SKU: 33002700](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i27-27-teeth-sku-33002700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=23 23 teeth SKU: 33002300](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i23-23-teeth-sku-33002300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=19 19 teeth SKU: 33001900](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i19-19-teeth-sku-33001900/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=13.5 27 teeth SKU: 33001400](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i13-5-27-teeth-sku-33001400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=12 24 teeth SKU: 33001200](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i12-24-teeth-sku-33001200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=8.66 26 teeth SKU: 33000800](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i8-66-26-teeth-sku-33000800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=6 18 teeth SKU: 33000600](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i6-18-teeth-sku-33000600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=4.25 17 teeth SKU: 33000400](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i4-25-17-teeth-sku-33000400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 65mm i=75 same dimensions as A63 i=70 SKU: 32347500](https://maedler.in/product/precision-worm-centre-distance-65mm-i75-same-dimensions-as-a63-i70-sku-32347500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=75 75 teeth SKU: 32337500](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i75-75-teeth-sku-32337500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=66 66 teeth SKU: 32336600](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i66-66-teeth-sku-32336600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=50 50 teeth SKU: 32335000](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i50-50-teeth-sku-32335000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=28 28 teeth SKU: 32332800](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i28-28-teeth-sku-32332800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=12.66 38 teeth SKU: 32331200](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i12-66-38-teeth-sku-32331200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=6.25 25 teeth SKU: 32330600](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i6-25-25-teeth-sku-32330600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=75 same dimensions as A50 i=69 SKU: 32317500](https://maedler.in/product/precision-worm-centre-distance-53mm-i75-same-dimensions-as-a50-i69-sku-32317500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=60 same dimensions as A50 i=55 SKU: 32316000](https://maedler.in/product/precision-worm-centre-distance-53mm-i60-same-dimensions-as-a50-i55-sku-32316000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=50 same dimensions as A63 i=63 ; A65 i= 66 SKU: 32315000](https://maedler.in/product/precision-worm-centre-distance-53mm-i50-same-dimensions-as-a63-i63-a65-i-66-sku-32315000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=38 same dimensions as A63 i=48 ; A65 i=50 SKU: 32313800](https://maedler.in/product/precision-worm-centre-distance-53mm-i38-same-dimensions-as-a63-i48-a65-i50-sku-32313800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=30 same dimensions as A 50 i=27 SKU: 32313000](https://maedler.in/product/precision-worm-centre-distance-53mm-i30-same-dimensions-as-a-50-i27-sku-32313000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=28 SKU: 32312800](https://maedler.in/product/precision-worm-centre-distance-53mm-i28-sku-32312800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=25 same dimensions as A50 i=23 SKU: 32312500](https://maedler.in/product/precision-worm-centre-distance-53mm-i25-same-dimensions-as-a50-i23-sku-32312500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=21 same dimensions as A63 i=26 ; A65 i=28 SKU: 32312100](https://maedler.in/product/precision-worm-centre-distance-53mm-i21-same-dimensions-as-a63-i26-a65-i28-sku-32312100/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=15 same dimensions as A50 i=13.5 SKU: 32311500](https://maedler.in/product/precision-worm-centre-distance-53mm-i15-same-dimensions-as-a50-i13-5-sku-32311500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=13.5 same dimensions as A50 i=12 SKU: 32311300](https://maedler.in/product/precision-worm-centre-distance-53mm-i13-5-same-dimensions-as-a50-i12-sku-32311300/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=9.67 same dimensions as A63 i=12 ; A65 i=12,66 SKU: 32310900](https://maedler.in/product/precision-worm-centre-distance-53mm-i9-67-same-dimensions-as-a63-i12-a65-i1266-sku-32310900/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=6.67 same dimensions as A50 i=6 SKU: 32310600](https://maedler.in/product/precision-worm-centre-distance-53mm-i6-67-same-dimensions-as-a50-i6-sku-32310600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=4.75 same dimensions as A63 i=6 ; A65 i=6.25 SKU: 32310400](https://maedler.in/product/precision-worm-centre-distance-53mm-i4-75-same-dimensions-as-a63-i6-a65-i6-25-sku-32310400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=75 75 teeth SKU: 32307500](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i75-75-teeth-sku-32307500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=60 60 teeth SKU: 32306000](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i60-60-teeth-sku-32306000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=50 50 teeth SKU: 32305000](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i50-50-teeth-sku-32305000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=38 38 teeth SKU: 32303800](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i38-38-teeth-sku-32303800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=30 30 teeth SKU: 32303000](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i30-30-teeth-sku-32303000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=28 28 teeth SKU: 32302800](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i28-28-teeth-sku-32302800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=25 25 teeth SKU: 32302500](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i25-25-teeth-sku-32302500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=21 21 teeth SKU: 32302100](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i21-21-teeth-sku-32302100/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=15 30 teeth SKU: 32301500](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i15-30-teeth-sku-32301500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=13.5 27 teeth SKU: 32301300](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i13-5-27-teeth-sku-32301300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=9.67 29 teeth SKU: 32300900](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i9-67-29-teeth-sku-32300900/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=6.67 20 teeth SKU: 32300600](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i6-67-20-teeth-sku-32300600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=4.75 19 teeth SKU: 32300400](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i4-75-19-teeth-sku-32300400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=80 SKU: 32248000](https://maedler.in/product/precision-worm-centre-distance-40mm-i80-sku-32248000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=75 SKU: 32247500](https://maedler.in/product/precision-worm-centre-distance-40mm-i75-sku-32247500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=70 SKU: 32247000](https://maedler.in/product/precision-worm-centre-distance-40mm-i70-sku-32247000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=60 SKU: 32246000](https://maedler.in/product/precision-worm-centre-distance-40mm-i60-sku-32246000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=56 SKU: 32245600](https://maedler.in/product/precision-worm-centre-distance-40mm-i56-sku-32245600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=50 SKU: 32245000](https://maedler.in/product/precision-worm-centre-distance-40mm-i50-sku-32245000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=40 SKU: 32244000](https://maedler.in/product/precision-worm-centre-distance-40mm-i40-sku-32244000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=35 SKU: 32243500](https://maedler.in/product/precision-worm-centre-distance-40mm-i35-sku-32243500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=30 SKU: 32243000](https://maedler.in/product/precision-worm-centre-distance-40mm-i30-sku-32243000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=28 SKU: 32242800](https://maedler.in/product/precision-worm-centre-distance-40mm-i28-sku-32242800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=25 SKU: 32242500](https://maedler.in/product/precision-worm-centre-distance-40mm-i25-sku-32242500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=20 SKU: 32242000](https://maedler.in/product/precision-worm-centre-distance-40mm-i20-sku-32242000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=15 SKU: 32241500](https://maedler.in/product/precision-worm-centre-distance-40mm-i15-sku-32241500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=12 SKU: 32241200](https://maedler.in/product/precision-worm-centre-distance-40mm-i12-sku-32241200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=10 SKU: 32241000](https://maedler.in/product/precision-worm-centre-distance-40mm-i10-sku-32241000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=8 SKU: 32240800](https://maedler.in/product/precision-worm-centre-distance-40mm-i8-sku-32240800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=6,75 SKU: 32240600](https://maedler.in/product/precision-worm-centre-distance-40mm-i675-sku-32240600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=80 80 teeth SKU: 32238000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i80-80-teeth-sku-32238000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=75 75 teeth SKU: 32237500](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i75-75-teeth-sku-32237500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=70 70 teeth SKU: 32237000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i70-70-teeth-sku-32237000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=60 60 teeth SKU: 32236000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i60-60-teeth-sku-32236000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=56 56 teeth SKU: 32235600](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i56-56-teeth-sku-32235600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=50 50 teeth SKU: 32235000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i50-50-teeth-sku-32235000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=40 40 teeth SKU: 32234000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i40-40-teeth-sku-32234000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=35 35 teeth SKU: 32233500](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i35-35-teeth-sku-32233500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=30 30 teeth SKU: 32233000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i30-30-teeth-sku-32233000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=28 28 teeth SKU: 32232800](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i28-28-teeth-sku-32232800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=25 50 teeth SKU: 32232500](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i25-50-teeth-sku-32232500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=20 40 teeth SKU: 32232000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i20-40-teeth-sku-32232000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=15 30 teeth SKU: 32231500](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i15-30-teeth-sku-32231500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=12 36 teeth SKU: 32231200](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i12-36-teeth-sku-32231200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=10 30 teeth SKU: 32231000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i10-30-teeth-sku-32231000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=8 24 teeth SKU: 32230800](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i8-24-teeth-sku-32230800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=6.75 27 teeth SKU: 32230600](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i6-75-27-teeth-sku-32230600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=90 SKU: 32219000](https://maedler.in/product/precision-worm-centre-distance-35mm-i90-sku-32219000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=58 SKU: 32215800](https://maedler.in/product/precision-worm-centre-distance-35mm-i58-sku-32215800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=50 SKU: 32215000](https://maedler.in/product/precision-worm-centre-distance-35mm-i50-sku-32215000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=40 SKU: 32214000](https://maedler.in/product/precision-worm-centre-distance-35mm-i40-sku-32214000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=30 SKU: 32213000](https://maedler.in/product/precision-worm-centre-distance-35mm-i30-sku-32213000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=25 SKU: 32212500](https://maedler.in/product/precision-worm-centre-distance-35mm-i25-sku-32212500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=20 SKU: 32212000](https://maedler.in/product/precision-worm-centre-distance-35mm-i20-sku-32212000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=15 SKU: 32211500](https://maedler.in/product/precision-worm-centre-distance-35mm-i15-sku-32211500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=12 SKU: 32211200](https://maedler.in/product/precision-worm-centre-distance-35mm-i12-sku-32211200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=10 SKU: 32211000](https://maedler.in/product/precision-worm-centre-distance-35mm-i10-sku-32211000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=8 SKU: 32210800](https://maedler.in/product/precision-worm-centre-distance-35mm-i8-sku-32210800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Cranked chain link type 12 / L for roller chain similar to 10 B-1 NP pitch 5/8x3/8" nickel-plated SKU: 10666004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-10-b-1-np-pitch-5-8x3-8-nickel-plated-sku-10666004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 10 B-1 SKU: 10666003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-10-b-1-sku-10666003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 10 B-1 NP pitch 5/8x3/8" nickel-plated SKU: 10666003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-10-b-1-np-pitch-5-8x3-8-nickel-plated-sku-10666003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 10 B NP pitch 5/8x3/8" nickel-plated SKU: 10666001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-10-b-np-pitch-5-8x3-8-nickel-plated-sku-10666001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 10 B-1 pitch 5/8x3/8" SKU: 10600500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-10-b-1-pitch-5-8x3-8-sku-10600500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 10 B-1 pitch 5/8x3/8" SKU: 10600400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-10-b-1-pitch-5-8x3-8-sku-10600400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for roller chain DIN ISO 606 10 B-1-GL pitch 5/8x3/8"" with straight plates packing unit 5 pieces SKU: 10600300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-din-iso-606-10-b-1-gl-pitch-5-8x3-8-with-straight-plates-packing-unit-5-pieces-sku-10600300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain 10 B-1 pitch 5/8x3/8" packing unit 5 pieces SKU: 10600300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-10-b-1-pitch-5-8x3-8-packing-unit-5-pieces-sku-10600300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Chain link type 10/S for roller chain 10 B-1 pitch 5/8x3/8" SKU: 10600200](https://maedler.in/product/chain-link-type-10-s-for-roller-chain-10-b-1-pitch-5-8x3-8-sku-10600200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4/B for roller chain DIN ISO 606 10 B - GL pitch 5/8x3/8" with straight plates SKU: 10600100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-10-b-gl-pitch-5-8x3-8-with-straight-plates-sku-10600100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 10 B pitch 5/8x3/8" SKU: 10600100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-10-b-pitch-5-8x3-8-sku-10600100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a triple-strand chain, there are 3 pieces required. - [Cranked chain link type 15 / C for premium stainless steel roller chain 08 B-1 SKU: 10599005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-08-b-1-sku-10599005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 08 B-1 SKU: 10599004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-08-b-1-sku-10599004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 08 B-1 pitch 1/2x5/16" SKU: 10599004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-08-b-1-pitch-1-2x5-16-sku-10599004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 08 B-1 SKU: 10599003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-08-b-1-sku-10599003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 08 B-1 pitch 1/2x5/16" with straight plates SKU: 10599003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-08-b-1-pitch-1-2x5-16-with-straight-plates-sku-10599003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Inner chain link type 4 / B stainless steel for roller chain similar to 08 B pitch 1/2x5/16" with straight plates SKU: 10599001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-08-b-pitch-1-2x5-16-with-straight-plates-sku-10599001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B stainless steel for roller chain similar to 08 B pitch 1/2x5/16" SKU: 10599001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-08-b-pitch-1-2x5-16-sku-10599001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 08 B-1 SKU: 10577005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-08-b-1-sku-10577005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 08 B-1 SKU: 10577004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-08-b-1-sku-10577004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Self-lubrication cranked chain link type 12 / L for roller chain similar to 08 B-1 SLR pitch 1/2x5/16" SKU: 10577004](https://maedler.in/product/self-lubrication-cranked-chain-link-type-12-l-for-roller-chain-similar-to-08-b-1-slr-pitch-1-2x5-16-sku-10577004/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 08 B-1 SKU: 10577003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-08-b-1-sku-10577003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Self-lubrication chain connecting link type 11 / E for roller chain similar to 08 B-1 SLR pitch 1/2x5/16" SKU: 10577003](https://maedler.in/product/self-lubrication-chain-connecting-link-type-11-e-for-roller-chain-similar-to-08-b-1-slr-pitch-1-2x5-16-sku-10577003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Self-lubrication inner chain link type 4 / B for roller chain similar to 08 B SLR pitch 1/2x5/16" SKU: 10577001](https://maedler.in/product/self-lubrication-inner-chain-link-type-4-b-for-roller-chain-similar-to-08-b-slr-pitch-1-2x5-16-sku-10577001/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Cranked chain link type 15 / C for roller chain Neptune 08 B-1 SKU: 10566005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-08-b-1-sku-10566005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 08 B-1 SKU: 10566004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-08-b-1-sku-10566004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 08 B-1 NP pitch 1/2x5/16" nickel-plated SKU: 10566004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-08-b-1-np-pitch-1-2x5-16-nickel-plated-sku-10566004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 08 B-1 SKU: 10566003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-08-b-1-sku-10566003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 08 B-1 NP pitch 1/2x5/16" nickel-plated packing unit 5 pieces SKU: 10566003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-08-b-1-np-pitch-1-2x5-16-nickel-plated-packing-unit-5-pieces-sku-10566003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 08 B NP pitch 1/2x5/16" nickel-plated SKU: 10566001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-08-b-np-pitch-1-2x5-16-nickel-plated-sku-10566001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 08 B-1 pitch 1/2x5/16 SKU: 10500500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-08-b-1-pitch-1-2x5-16-sku-10500500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 08 B-1 pitch 1/2x5/16 SKU: 10500400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-08-b-1-pitch-1-2x5-16-sku-10500400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for roller chain DIN ISO 606 08 B-1-GL pitch 1/2x5/16" with straight plates packing unit 5 pieces SKU: 10500300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-din-iso-606-08-b-1-gl-pitch-1-2x5-16-with-straight-plates-packing-unit-5-pieces-sku-10500300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain 08 B-1 pitch 1/2x5/16" packing unit 5 pieces SKU: 10500300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-08-b-1-pitch-1-2x5-16-packing-unit-5-pieces-sku-10500300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4/B for roller chain DIN ISO 606 08 B - GL pitch 1/2x5/16" with straight plates SKU: 10500100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-08-b-gl-pitch-1-2x5-16-with-straight-plates-sku-10500100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 08 B pitch 1/2x5/16" SKU: 10500100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-08-b-pitch-1-2x5-16-sku-10500100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a triple-strand chain, there are 3 pieces required. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 083 pitch 1/2x3/16" SKU: 10399004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-083-pitch-1-2x3-16-sku-10399004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 083 pitch 1/2x3/16" SKU: 10399003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-083-pitch-1-2x3-16-sku-10399003/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). Size 20 B-1 with cottered pins. - [Inner chain link type 4 / B stainless steel for roller chain similar to 083 pitch 1/2x3/16" SKU: 10399001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-083-pitch-1-2x3-16-sku-10399001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain company standard pitch 1/2x3/16" V SKU: 10340500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-company-standard-pitch-1-2x3-16-v-sku-10340500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain company standard pitch 1/2x3/16" V SKU: 10340400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-company-standard-pitch-1-2x3-16-v-sku-10340400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain company standard pitch 1/2x3/16" V SKU: 10340300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-company-standard-pitch-1-2x3-16-v-sku-10340300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain company standard pitch 1/2x3/16" V SKU: 10340100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-company-standard-pitch-1-2x3-16-v-sku-10340100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for roller chain 083 pitch 1/2x3/16" SKU: 10300500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-083-pitch-1-2x3-16-sku-10300500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 083 pitch 1/2x3/16" SKU: 10300400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-083-pitch-1-2x3-16-sku-10300400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain 083 pitch 1/2x3/16" packing unit 5 pieces SKU: 10300300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-083-pitch-1-2x3-16-packing-unit-5-pieces-sku-10300300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain 083 pitch 1/2x3/16" SKU: 10300100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-083-pitch-1-2x3-16-sku-10300100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for roller chain 081 pitch 1/2x1/8" SKU: 10200500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-081-pitch-1-2x1-8-sku-10200500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 081 pitch 1/2x1/8" SKU: 10200400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-081-pitch-1-2x1-8-sku-10200400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain 081 pitch 1/2x1/8" packing unit 5 pieces SKU: 10200300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-081-pitch-1-2x1-8-packing-unit-5-pieces-sku-10200300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain 081 pitch 1/2x1/8" SKU: 10200100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-081-pitch-1-2x1-8-sku-10200100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for premium stainless steel roller chain 06 B-1 SKU: 10199005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-06-b-1-sku-10199005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 06 B-1 SKU: 10199004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-06-b-1-sku-10199004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 06 B-1 pitch 3/8x7/32" SKU: 10199004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-06-b-1-pitch-3-8x7-32-sku-10199004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 06 B-1 SKU: 10199003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-06-b-1-sku-10199003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Inner chain link type 4 / B stainless steel for roller chain similar to 06 B pitch 3/8x7/32" SKU: 10199001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-06-b-pitch-3-8x7-32-sku-10199001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 06 B-1 SKU: 10177005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-06-b-1-sku-10177005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 06 B-1 SKU: 10177004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-06-b-1-sku-10177004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 06 B-1 SKU: 10177003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-06-b-1-sku-10177003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for roller chain Neptune 06 B-1 SKU: 10166005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-06-b-1-sku-10166005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 06 B-1 SKU: 10166004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-06-b-1-sku-10166004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 06 B-1 NP pitch 3/8x7/32" nickel-plated SKU: 10166004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-06-b-1-np-pitch-3-8x7-32-nickel-plated-sku-10166004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 06 B-1 SKU: 10166003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-06-b-1-sku-10166003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 06 B-1 NP pitch 3/8x7/32" nickel-plated packing unit 5 pieces SKU: 10166003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-06-b-1-np-pitch-3-8x7-32-nickel-plated-packing-unit-5-pieces-sku-10166003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 06 B NP pitch 3/8x7/32" nickel-plated SKU: 10166001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-06-b-np-pitch-3-8x7-32-nickel-plated-sku-10166001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 06 B-1 pitch 3/8x7/32 SKU: 10100500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-06-b-1-pitch-3-8x7-32-sku-10100500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 06 B-1 pitch 3/8x7/32 SKU: 10100400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-06-b-1-pitch-3-8x7-32-sku-10100400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain06 B-1 pitch 3/8x7/32" packing unit 5 pieces SKU: 10100300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain06-b-1-pitch-3-8x7-32-packing-unit-5-pieces-sku-10100300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain 06 B pitch 3/8x7/32" SKU: 10100100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-06-b-pitch-3-8x7-32-sku-10100100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a double-strand chain, there are 2 pieces required. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 05 B-1 pitch 8mm SKU: 10099804](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-05-b-1-pitch-8mm-sku-10099804/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 05 B-1 pitch 8mm SKU: 10099803](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-05-b-1-pitch-8mm-sku-10099803/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). Size 20 B-1 with cottered pins. - [Inner chain link type 4 / B stainless steel for roller chain similar to 05 B pitch 8mm SKU: 10099801](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-05-b-pitch-8mm-sku-10099801/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C stainless steel for roller chain no. 04 pitch 6mm SKU: 10099605](https://maedler.in/product/cranked-chain-link-type-15-c-stainless-steel-for-roller-chain-no-04-pitch-6mm-sku-10099605/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E stainless steel for roller chain no. 04 pitch 6mm SKU: 10099603](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-no-04-pitch-6mm-sku-10099603/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). Size 20 B-1 with cottered pins. - [Inner chain link type 4 / B stainless steel for roller chain no. 04 pitch 6mm SKU: 10099601](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-no-04-pitch-6mm-sku-10099601/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain 05 B-1 pitch 8mm SKU: 10080500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-05-b-1-pitch-8mm-sku-10080500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain 05 B-1 pitch 8mm packing unit 5 pieces SKU: 10080300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-05-b-1-pitch-8mm-packing-unit-5-pieces-sku-10080300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain 05 B pitch 8mm SKU: 10080100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-05-b-pitch-8mm-sku-10080100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a double-strand chain, there are 2 pieces required. - [Cranked chain link type 12 / L for roller chain similar to 05 B-1 NP pitch 8mm nickel-plated SKU: 10066804](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-05-b-1-np-pitch-8mm-nickel-plated-sku-10066804/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain similar to 05 B-1 NP pitch 8mm nickel-plated packing unit 5 pieces SKU: 10066803](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-05-b-1-np-pitch-8mm-nickel-plated-packing-unit-5-pieces-sku-10066803/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 05 B NP pitch 8mm nickel-plated SKU: 10066801](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-05-b-np-pitch-8mm-nickel-plated-sku-10066801/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain no. 04 pitch 6mm SKU: 10060500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-no-04-pitch-6mm-sku-10060500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain no. 04 pitch 6mm packing unit 5 pieces SKU: 10060300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-no-04-pitch-6mm-packing-unit-5-pieces-sku-10060300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain no. 04 pitch 6mm SKU: 10060100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-no-04-pitch-6mm-sku-10060100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for roller chain no. 03 pitch 5mm SKU: 10030300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-no-03-pitch-5mm-sku-10030300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain no. 03 pitch 5mm SKU: 10030100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-no-03-pitch-5mm-sku-10030100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain link type 10 / K for chain company standard pitch 4mm SKU: 10000200](https://maedler.in/product/chain-link-type-10-k-for-chain-company-standard-pitch-4mm-sku-10000200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Precision worm shaft centre distance 125mm i=62 single-thread SKU: 33226202](https://maedler.in/product/precision-worm-shaft-centre-distance-125mm-i62-single-thread-sku-33226202/): Material: Steel C45 hardened. Shaft ends soft. Tooth flanks ground. Pressure angle: 20°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=80 SKU: 33078000](https://maedler.in/product/precision-worm-centre-distance-80mm-i80-sku-33078000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=50 SKU: 33075000](https://maedler.in/product/precision-worm-centre-distance-80mm-i50-sku-33075000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=30 SKU: 33073000](https://maedler.in/product/precision-worm-centre-distance-80mm-i30-sku-33073000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=20 SKU: 33072000](https://maedler.in/product/precision-worm-centre-distance-80mm-i20-sku-33072000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=12 SKU: 33071200](https://maedler.in/product/precision-worm-centre-distance-80mm-i12-sku-33071200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=6.75 SKU: 33070700](https://maedler.in/product/precision-worm-centre-distance-80mm-i6-75-sku-33070700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=80 80 teeth SKU: 33068000](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i80-80-teeth-sku-33068000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=50 50 teeth SKU: 33065000](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i50-50-teeth-sku-33065000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=30 30 teeth SKU: 33063000](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i30-30-teeth-sku-33063000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=20 40 teeth SKU: 33062000](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i20-40-teeth-sku-33062000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=12 48 teeth SKU: 33061200](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i12-48-teeth-sku-33061200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=6.75 27 teeth SKU: 33060700](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i6-75-27-teeth-sku-33060700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Cranked chain link type 12 / L for roller chain Titan 24 B-1 SKU: 11000400T](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-titan-24-b-1-sku-11000400t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Plates black oxided. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 24 B-1 pitch 1 1/2x1" SKU: 11000400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-24-b-1-pitch-1-1-2x1-sku-11000400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for roller chain Titan 24 B-1 SKU: 11000200T](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-titan-24-b-1-sku-11000200t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. - [Chain link type 10/S for roller chain 24B-1 pitch 1 1/2x1" SKU: 11000200](https://maedler.in/product/chain-link-type-10-s-for-roller-chain-24b-1-pitch-1-1-2x1-sku-11000200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 24 B pitch 1 1/2x1" SKU: 11000100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-24-b-pitch-1-1-2x1-sku-11000100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for roller chain 20 B-1 pitch 1 1/4x3/4 material stainless steel SKU: 10999004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-20-b-1-pitch-1-1-4x3-4-material-stainless-steel-sku-10999004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 20 B-1 pitch 1 1/4x3/4" with straight plates SKU: 10999003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-20-b-1-pitch-1-1-4x3-4-with-straight-plates-sku-10999003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Chain connecting link type 11 / E for roller chain 20 B-1 pitch 1 1/4x3/4 material stainless steel SKU: 10999003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-20-b-1-pitch-1-1-4x3-4-material-stainless-steel-sku-10999003/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). Size 20 B-1 with cottered pins. - [Inner chain link type 4 / B stainless steel for roller chain similar to 20 B pitch 1 1/4x3/4" with straight plates SKU: 10999001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-20-b-pitch-1-1-4x3-4-with-straight-plates-sku-10999001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B for roller chain 20 B pitch 1 1/4x3/4" material stainless steel SKU: 10999001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-20-b-pitch-1-1-4x3-4-material-stainless-steel-sku-10999001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 20 B-1 SKU: 10977005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-20-b-1-sku-10977005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 20 B-1 SKU: 10977004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-20-b-1-sku-10977004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for roller chain Lambda 20B-1 SKU: 10977002L](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-lambda-20b-1-sku-10977002l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for roller chain Neptune 20 B-1 SKU: 10966005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-20-b-1-sku-10966005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 20 B-1 SKU: 10966004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-20-b-1-sku-10966004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 20 B-1 NP pitch 1 1/4x3/4" nickel-plated SKU: 10966004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-20-b-1-np-pitch-1-1-4x3-4-nickel-plated-sku-10966004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain similar to 20 B-1 NP pitch 1 1/4x3/4" nickel-plated SKU: 10966003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-20-b-1-np-pitch-1-1-4x3-4-nickel-plated-sku-10966003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 10 / S for roller chain Neptune 20 B-1 SKU: 10966002N](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-neptune-20-b-1-sku-10966002n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Inner chain link type 4 / B for roller chain similar to 20 B NP pitch 1 1/4x3/4" nickel-plated SKU: 10966001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-20-b-np-pitch-1-1-4x3-4-nickel-plated-sku-10966001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 20 B-1 pitch 1 1/4x3/4 SKU: 10900500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-20-b-1-pitch-1-1-4x3-4-sku-10900500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Titan 20 B-1 SKU: 10900400T](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-titan-20-b-1-sku-10900400t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Plates black oxided. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 20 B-1 pitch 1 1/4x3/4 SKU: 10900400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-20-b-1-pitch-1-1-4x3-4-sku-10900400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10/S with cottered pin for roller chain DIN ISO 606 20 B-1-GL pitch 1 1/4x3/4" with straight plates SKU: 10900300GL](https://maedler.in/product/chain-connecting-link-type-10-s-with-cottered-pin-for-roller-chain-din-iso-606-20-b-1-gl-pitch-1-1-4x3-4-with-straight-plates-sku-10900300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain 20 B-1 pitch 1 1/4x3/4 SKU: 10900300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-20-b-1-pitch-1-1-4x3-4-sku-10900300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Chain connecting link type 10 / S for roller chain Titan 20 B-1 SKU: 10900200T](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-titan-20-b-1-sku-10900200t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. - [Chain link type 10/S for roller chain 20B-1 pitch 1 1/4x3/4 SKU: 10900200](https://maedler.in/product/chain-link-type-10-s-for-roller-chain-20b-1-pitch-1-1-4x3-4-sku-10900200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4/B for roller chain DIN ISO 606 20 B - GL pitch 1 1/4x3/4" with straight plates SKU: 10900100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-20-b-gl-pitch-1-1-4x3-4-with-straight-plates-sku-10900100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 20 B pitch 1 1/4x3/4" SKU: 10900100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-20-b-pitch-1-1-4x3-4-sku-10900100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for premium stainless steel roller chain 16 B-1 SKU: 10899005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-16-b-1-sku-10899005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 16 B-1 SKU: 10899004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-16-b-1-sku-10899004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 16 B-1 pitch 1"x17.02mm SKU: 10899004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-16-b-1-pitch-1x17-02mm-sku-10899004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 16 B-1 SKU: 10899003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-16-b-1-sku-10899003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 16 B-1 pitch 1"x17.02mm with straight plates SKU: 10899003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-16-b-1-pitch-1x17-02mm-with-straight-plates-sku-10899003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Chain coonecting link type 10 / S for premium stainless steel roller chain 16 B-1 SKU: 10899002P](https://maedler.in/product/chain-coonecting-link-type-10-s-for-premium-stainless-steel-roller-chain-16-b-1-sku-10899002p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Inner chain link type 4 / B stainless steel for roller chain similar to 16 B pitch 1"x17.02mm with straight plates SKU: 10899001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-16-b-pitch-1x17-02mm-with-straight-plates-sku-10899001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B stainless steel for roller chain similar to 16 B pitch 1"x17.02mm SKU: 10899001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-16-b-pitch-1x17-02mm-sku-10899001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 16 B-1 SKU: 10877005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-16-b-1-sku-10877005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 16 B-1 SKU: 10877004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-16-b-1-sku-10877004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Self-lubrication cranked chain link type 12 / L for roller chain similar to 16 B-1 SLR pitch 1"x17.02mm SKU: 10877004](https://maedler.in/product/self-lubrication-cranked-chain-link-type-12-l-for-roller-chain-similar-to-16-b-1-slr-pitch-1x17-02mm-sku-10877004/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 16 B-1 SKU: 10877003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-16-b-1-sku-10877003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Self-lubrication chain connecting link type 11 / E for roller chain similar to 16 B-1 SLR pitch 1"x17.02mm SKU: 10877003](https://maedler.in/product/self-lubrication-chain-connecting-link-type-11-e-for-roller-chain-similar-to-16-b-1-slr-pitch-1x17-02mm-sku-10877003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Self-lubrication inner chain link type 4 / B for roller chain similar to 16 B SLR pitch 1"x17,02mm SKU: 10877001](https://maedler.in/product/self-lubrication-inner-chain-link-type-4-b-for-roller-chain-similar-to-16-b-slr-pitch-1x1702mm-sku-10877001/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Cranked chain link type 15 / C for roller chain Neptune 16 B-1 SKU: 10866005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-16-b-1-sku-10866005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 16 B-1 SKU: 10866004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-16-b-1-sku-10866004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 16 B-1 NP pitch 1"x17.02mm nickel-plated SKU: 10866004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-16-b-1-np-pitch-1x17-02mm-nickel-plated-sku-10866004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 16 B-1 SKU: 10866003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-16-b-1-sku-10866003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 16 B-1 NP pitch 1"x17.02mm nickel-plated SKU: 10866003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-16-b-1-np-pitch-1x17-02mm-nickel-plated-sku-10866003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 16 B NP pitch 1"x17.02mm nickel-plated SKU: 10866001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-16-b-np-pitch-1x17-02mm-nickel-plated-sku-10866001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 16 B-1 pitch 1"x17.02mm SKU: 10800500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-16-b-1-pitch-1x17-02mm-sku-10800500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Titan 16 B-1 SKU: 10800400T](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-titan-16-b-1-sku-10800400t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Plates black oxided. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 16 B-1 pitch 1"x17.02mm SKU: 10800400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-16-b-1-pitch-1x17-02mm-sku-10800400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Titan 16 B-1 SKU: 10800300T](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-titan-16-b-1-sku-10800300t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. - [Chain connecting link type 10 / S with cottered pin for roller chain DIN ISO 606 16 B-1-GLH pitch 1"x17,02mm with straight plates high version SKU: 10800300GLH](https://maedler.in/product/chain-connecting-link-type-10-s-with-cottered-pin-for-roller-chain-din-iso-606-16-b-1-glh-pitch-1x1702mm-with-straight-plates-high-version-sku-10800300glh/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 10 / S with cottered pin for roller chain DIN ISO 606 16 B-1-GL pitch 1"x17,02mm with straight plates SKU: 10800300GL](https://maedler.in/product/chain-connecting-link-type-10-s-with-cottered-pin-for-roller-chain-din-iso-606-16-b-1-gl-pitch-1x1702mm-with-straight-plates-sku-10800300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain16 B-1 pitch 1"x17.02mm SKU: 10800300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain16-b-1-pitch-1x17-02mm-sku-10800300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Chain link type 10/S for roller chain16B-1 pitch 1"x17.02mm SKU: 10800200](https://maedler.in/product/chain-link-type-10-s-for-roller-chain16b-1-pitch-1x17-02mm-sku-10800200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4/B for roller chain DIN ISO 606 16 B - GLH pitch 1"x17,02mm with straight plates high performance SKU: 10800100GLH](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-16-b-glh-pitch-1x1702mm-with-straight-plates-high-performance-sku-10800100glh/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a double-strand chain, there are 2 pieces required. - [Inner chain link type 4/B for roller chain DIN ISO 606 16 B - GL pitch 1"x17,02mm with straight plates SKU: 10800100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-16-b-gl-pitch-1x1702mm-with-straight-plates-sku-10800100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain16 B pitch 1"x17.02mm SKU: 10800100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain16-b-pitch-1x17-02mm-sku-10800100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for premium stainless steel roller chain 12 B-1 SKU: 10799005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-12-b-1-sku-10799005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 12 B-1 SKU: 10799004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-12-b-1-sku-10799004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 12 B-1 pitch 3/4x7/16" SKU: 10799004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-12-b-1-pitch-3-4x7-16-sku-10799004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 12 B-1 SKU: 10799003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-12-b-1-sku-10799003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 12 B-1 pitch 3/4x7/16" with straight plates SKU: 10799003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-12-b-1-pitch-3-4x7-16-with-straight-plates-sku-10799003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Chain coonecting link type 10 / S for premium stainless steel roller chain 12 B-1 SKU: 10799002P](https://maedler.in/product/chain-coonecting-link-type-10-s-for-premium-stainless-steel-roller-chain-12-b-1-sku-10799002p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Inner chain link type 4 / B stainless steel for roller chain similar to 12 B pitch 3/4x7/16" with straight plates SKU: 10799001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-12-b-pitch-3-4x7-16-with-straight-plates-sku-10799001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B stainless steel for roller chain similar to 12 B pitch 3/4x7/16" SKU: 10799001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-12-b-pitch-3-4x7-16-sku-10799001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 12 B-1 SKU: 10777005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-12-b-1-sku-10777005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 12 B-1 SKU: 10777004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-12-b-1-sku-10777004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Self-lubrication cranked chain link type 12 / L for roller chain similar to 12 B-1 SLR pitch 3/4x7/16" SKU: 10777004](https://maedler.in/product/self-lubrication-cranked-chain-link-type-12-l-for-roller-chain-similar-to-12-b-1-slr-pitch-3-4x7-16-sku-10777004/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 12 B-1 SKU: 10777003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-12-b-1-sku-10777003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Self-lubrication chain connecting link type 11 / E for roller chain similar to 12 B-1 SLR pitch 3/4x7/16" SKU: 10777003](https://maedler.in/product/self-lubrication-chain-connecting-link-type-11-e-for-roller-chain-similar-to-12-b-1-slr-pitch-3-4x7-16-sku-10777003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Self-lubrication inner chain link type 4 / B for roller chain similar to 12 B SLR pitch 3/4x7/16" SKU: 10777001](https://maedler.in/product/self-lubrication-inner-chain-link-type-4-b-for-roller-chain-similar-to-12-b-slr-pitch-3-4x7-16-sku-10777001/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Cranked chain link type 15 / C for roller chain Neptune 12 B-1 SKU: 10766005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-12-b-1-sku-10766005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 12 B-1 SKU: 10766004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-12-b-1-sku-10766004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 12 B-1 NP pitch 3/4x7/16" nickel-plated SKU: 10766004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-12-b-1-np-pitch-3-4x7-16-nickel-plated-sku-10766004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 12 B-1 SKU: 10766003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-12-b-1-sku-10766003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 12 B-1 NP pitch 3/4x7/16" nickel-plated SKU: 10766003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-12-b-1-np-pitch-3-4x7-16-nickel-plated-sku-10766003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 12 B NP pitch 3/4x7/16" nickel-plated SKU: 10766001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-12-b-np-pitch-3-4x7-16-nickel-plated-sku-10766001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 12 B-1 pitch 3/4x7/16" SKU: 10700500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-12-b-1-pitch-3-4x7-16-sku-10700500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 12 B-1 pitch 3/4x7/16" SKU: 10700400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-12-b-1-pitch-3-4x7-16-sku-10700400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for roller chain DIN ISO 606 12 B-1-GL pitch 3/4x7/16" with straight plates packing unit 5 pieces SKU: 10700300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-din-iso-606-12-b-1-gl-pitch-3-4x7-16-with-straight-plates-packing-unit-5-pieces-sku-10700300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain 12 B-1 pitch 3/4x7/16" packing unit 5 pieces SKU: 10700300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-12-b-1-pitch-3-4x7-16-packing-unit-5-pieces-sku-10700300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4/B for roller chain DIN ISO 606 12 B - GL pitch 3/4x7/16" with straight plates SKU: 10700100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-12-b-gl-pitch-3-4x7-16-with-straight-plates-sku-10700100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 12 B pitch 3/4x7/16" SKU: 10700100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-12-b-pitch-3-4x7-16-sku-10700100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a triple-strand chain, there are 3 pieces required. - [Cranked chain link type 15 / C for premium stainless steel roller chain 10 B-1 SKU: 10699005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-10-b-1-sku-10699005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 10 B-1 SKU: 10699004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-10-b-1-sku-10699004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 10 B-1 pitch 5/8x3/8" SKU: 10699004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-10-b-1-pitch-5-8x3-8-sku-10699004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 10 B-1 SKU: 10699003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-10-b-1-sku-10699003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 10 B-1 pitch 5/8x3/8" with straight plates SKU: 10699003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-10-b-1-pitch-5-8x3-8-with-straight-plates-sku-10699003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Inner chain link type 4 / B stainless steel for roller chain similar to 10 B pitch 5/8x3/8" with straight plates SKU: 10699001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-10-b-pitch-5-8x3-8-with-straight-plates-sku-10699001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B stainless steel for roller chain similar to 10 B pitch 5/8x3/8" SKU: 10699001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-10-b-pitch-5-8x3-8-sku-10699001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 10 B-1 SKU: 10677005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-10-b-1-sku-10677005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 10 B-1 SKU: 10677004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-10-b-1-sku-10677004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Self-lubrication cranked chain link type 12 / L for roller chain similar to 10 B-1 SLR pitch 5/8x3/8" SKU: 10677004](https://maedler.in/product/self-lubrication-cranked-chain-link-type-12-l-for-roller-chain-similar-to-10-b-1-slr-pitch-5-8x3-8-sku-10677004/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 10 B-1 SKU: 10677003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-10-b-1-sku-10677003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Self-lubrication chain connecting link type 11 / E for roller chain similar to 10 B-1 SLR pitch 5/8x3/8" SKU: 10677003](https://maedler.in/product/self-lubrication-chain-connecting-link-type-11-e-for-roller-chain-similar-to-10-b-1-slr-pitch-5-8x3-8-sku-10677003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Self-lubrication inner chain link type 4 / B for roller chain similar to 10 B SLR pitch 5/8x3/8" SKU: 10677001](https://maedler.in/product/self-lubrication-inner-chain-link-type-4-b-for-roller-chain-similar-to-10-b-slr-pitch-5-8x3-8-sku-10677001/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Cranked chain link type 15 / C for roller chain Neptune 10 B-1 SKU: 10666005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-10-b-1-sku-10666005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 10 B-1 SKU: 10666004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-10-b-1-sku-10666004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for triple-strand roller chain 16 B-3 pitch 1"x17.02mm SKU: 13800400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-16-b-3-pitch-1x17-02mm-sku-13800400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 16 B-3 pitch 1"x17.02mm SKU: 13800300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-16-b-3-pitch-1x17-02mm-sku-13800300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for triple-strand roller chain 12 B-3 pitch 3/4x7/16" SKU: 13700400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-12-b-3-pitch-3-4x7-16-sku-13700400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 12 B-3 pitch 3/4x7/16" SKU: 13700300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-12-b-3-pitch-3-4x7-16-sku-13700300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for triple-strand roller chain 10 B-3 pitch 5/8x3/8" SKU: 13600400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-10-b-3-pitch-5-8x3-8-sku-13600400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 10 B-3 pitch 5/8x3/8" SKU: 13600300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-10-b-3-pitch-5-8x3-8-sku-13600300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for triple-strand roller chain 08 B-3 pitch 1/2x5/16" SKU: 13500400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-08-b-3-pitch-1-2x5-16-sku-13500400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 08 B-3 pitch 1/2x5/16" SKU: 13500300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-08-b-3-pitch-1-2x5-16-sku-13500300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for triple-strand roller chain 06 B-3 pitch 3/8x7/32" SKU: 13100400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-06-b-3-pitch-3-8x7-32-sku-13100400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 06 B-3 pitch 3/8x7/32" SKU: 13100300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-06-b-3-pitch-3-8x7-32-sku-13100300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 24 B-2 SKU: 12977505L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-24-b-2-sku-12977505l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 24 B-2 SKU: 12977504L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-24-b-2-sku-12977504l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for double-strand roller chain Lambda 24 B-2 SKU: 12977502L](https://maedler.in/product/chain-connecting-link-type-10-s-for-double-strand-roller-chain-lambda-24-b-2-sku-12977502l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 20 B-2 SKU: 12977005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-20-b-2-sku-12977005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 20 B-2 SKU: 12977004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-20-b-2-sku-12977004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for double-strand roller chain Lambda 20 B-2 SKU: 12977002L](https://maedler.in/product/chain-connecting-link-type-10-s-for-double-strand-roller-chain-lambda-20-b-2-sku-12977002l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 20 B-2 SKU: 12966004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-20-b-2-sku-12966004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for double-strand roller chain Neptune 20 B-2 SKU: 12966002N](https://maedler.in/product/chain-connecting-link-type-10-s-for-double-strand-roller-chain-neptune-20-b-2-sku-12966002n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 12 / L for double-strand roller chain 24 B-2 pitch 1 1/2x1" SKU: 12950400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-24-b-2-pitch-1-1-2x1-sku-12950400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain link type 10 / S for double-strand roller chain 24 B-2 pitch 1 1/2x1" SKU: 12950200](https://maedler.in/product/chain-link-type-10-s-for-double-strand-roller-chain-24-b-2-pitch-1-1-2x1-sku-12950200/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for double-strand roller chain 20 B-2 pitch 1 1/4x3/4" SKU: 12900400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-20-b-2-pitch-1-1-4x3-4-sku-12900400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 20 B-2-GL pitch 1 1/4x3/4" with straight plates SKU: 12900300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-20-b-2-gl-pitch-1-1-4x3-4-with-straight-plates-sku-12900300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain link type 10 / S for double-strand roller chain 20 B-2 pitch 1 1/4x3/4" SKU: 12900200](https://maedler.in/product/chain-link-type-10-s-for-double-strand-roller-chain-20-b-2-pitch-1-1-4x3-4-sku-12900200/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 16 B-2 pitch 1"x17.02mm material stainless steel SKU: 12899005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-material-stainless-steel-sku-12899005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 16 B-2 pitch 1"x17.02mm material stainless steel SKU: 12899004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-material-stainless-steel-sku-12899004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 16 B-2 pitch 1"x17.02mm material stainless steel SKU: 12899003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-material-stainless-steel-sku-12899003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 16 B-2 SKU: 12877005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-16-b-2-sku-12877005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 16 B-2 SKU: 12877004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-16-b-2-sku-12877004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 16 B-2 SKU: 12877003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-16-b-2-sku-12877003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Chain connecting link type 10 / S for double-strand roller chain Lambda 16 B-2 SKU: 12877002L](https://maedler.in/product/chain-connecting-link-type-10-s-for-double-strand-roller-chain-lambda-16-b-2-sku-12877002l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 16 B-2 SKU: 12866005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-16-b-2-sku-12866005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 16 B-2 SKU: 12866004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-16-b-2-sku-12866004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 16 B-2 SKU: 12866003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-16-b-2-sku-12866003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 16 B-2 pitch 1"x17.02mm SKU: 12800500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-sku-12800500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 16 B-2 pitch 1"x17.02mm SKU: 12800400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-sku-12800400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 16 B-2-GLH pitch 1"x17,02mm with straight plates high version SKU: 12800300GLH](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-16-b-2-glh-pitch-1x1702mm-with-straight-plates-high-version-sku-12800300glh/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 16 B-2-GL pitch 1"x17,02mm with straight plates SKU: 12800300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-16-b-2-gl-pitch-1x1702mm-with-straight-plates-sku-12800300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for double-strand roller chain 16 B-2 pitch 1"x17.02mm SKU: 12800300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-sku-12800300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 12 B-2 pitch 3/4x7/16" material stainless steel SKU: 12799005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-material-stainless-steel-sku-12799005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 12 B-2 pitch 3/4x7/16" material stainless steel SKU: 12799004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-material-stainless-steel-sku-12799004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 12 B-2 pitch 3/4x7/16" material stainless steel SKU: 12799003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-material-stainless-steel-sku-12799003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 12 B-2 SKU: 12777005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-12-b-2-sku-12777005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 12 B-2 SKU: 12777004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-12-b-2-sku-12777004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 12 B-2 SKU: 12777003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-12-b-2-sku-12777003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 12 B-2 SKU: 12766005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-12-b-2-sku-12766005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 12 B-2 SKU: 12766004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-12-b-2-sku-12766004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 12 B-2 SKU: 12766003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-12-b-2-sku-12766003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 12 B-2 pitch 3/4x7/16" SKU: 12700500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-sku-12700500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 12 B-2 pitch 3/4x7/16" SKU: 12700400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-sku-12700400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 12 B-2-GL pitch 3/4x7/16" with straight plates SKU: 12700300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-12-b-2-gl-pitch-3-4x7-16-with-straight-plates-sku-12700300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for double-strand roller chain 12 B-2 pitch 3/4x7/16" SKU: 12700300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-sku-12700300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 10 B-2 pitch 5/8x3/8" material stainless steel SKU: 12699005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-material-stainless-steel-sku-12699005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 10 B-2 pitch 5/8x3/8" material stainless steel SKU: 12699004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-material-stainless-steel-sku-12699004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 10 B-2 pitch 5/8x3/8" material stainless steel SKU: 12699003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-material-stainless-steel-sku-12699003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 10 B-2 SKU: 12677005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-10-b-2-sku-12677005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 10 B-2 SKU: 12677004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-10-b-2-sku-12677004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 10 B-2 SKU: 12677003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-10-b-2-sku-12677003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 10 B-2 SKU: 12666005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-10-b-2-sku-12666005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 10 B-2 SKU: 12666004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-10-b-2-sku-12666004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 10 B-2 SKU: 12666003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-10-b-2-sku-12666003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 10 B-2 pitch 5/8x3/8" SKU: 12600500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-sku-12600500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 10 B-2 pitch 5/8x3/8" SKU: 12600400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-sku-12600400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 10 B-2-GL pitch 5/8x3/8" with straight plates SKU: 12600300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-10-b-2-gl-pitch-5-8x3-8-with-straight-plates-sku-12600300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for double-strand roller chain 10 B-2 pitch 5/8x3/8" SKU: 12600300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-sku-12600300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 08 B-2 pitch 1/2x5/16" material stainless steel SKU: 12599005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-material-stainless-steel-sku-12599005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 08 B-2 pitch 1/2x5/16" material stainless steel SKU: 12599004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-material-stainless-steel-sku-12599004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 08 B-2 pitch 1/2x5/16" material stainless steel SKU: 12599003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-material-stainless-steel-sku-12599003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 08 B-2 SKU: 12577005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-08-b-2-sku-12577005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 08 B-2 SKU: 12577004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-08-b-2-sku-12577004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 08 B-2 SKU: 12577003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-08-b-2-sku-12577003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 08 B-2 SKU: 12566005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-08-b-2-sku-12566005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 08 B-2 SKU: 12566004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-08-b-2-sku-12566004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 08 B-2 SKU: 12566003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-08-b-2-sku-12566003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 08 B-2 pitch 1/2x5/16" SKU: 12500500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-sku-12500500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 08 B-2 pitch 1/2x5/16" SKU: 12500400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-sku-12500400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 08 B-2-GL pitch 1/2x5/16" with straight plates SKU: 12500300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-08-b-2-gl-pitch-1-2x5-16-with-straight-plates-sku-12500300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for double-strand roller chain 08 B-2 pitch 1/2x5/16" SKU: 12500300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-sku-12500300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 06 B-2 pitch 3/8x7/32" material stainless steel SKU: 12199005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-material-stainless-steel-sku-12199005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 06 B-2 pitch 3/8x7/32" material stainless steel SKU: 12199004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-material-stainless-steel-sku-12199004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 06 B-2 pitch 3/8x7/32" material stainless steel SKU: 12199003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-material-stainless-steel-sku-12199003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 06 B-2 SKU: 12177005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-06-b-2-sku-12177005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 06 B-2 SKU: 12177003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-06-b-2-sku-12177003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 06 B-2 SKU: 12166005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-06-b-2-sku-12166005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 06 B-2 SKU: 12166004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-06-b-2-sku-12166004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 06 B-2 SKU: 12166003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-06-b-2-sku-12166003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 06 B-2 pitch 3/8x7/32" SKU: 12100500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-sku-12100500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 06 B-2 pitch 3/8x7/32" SKU: 12100400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-sku-12100400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 06 B-2 pitch 3/8x7/32" SKU: 12100300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-sku-12100300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 05 B-2 pitch 8mm material stainless steel SKU: 12099005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-05-b-2-pitch-8mm-material-stainless-steel-sku-12099005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 05 B-2 pitch 8mm material stainless steel SKU: 12099003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-05-b-2-pitch-8mm-material-stainless-steel-sku-12099003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain 05 B-2 pitch 8mm SKU: 12000500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-05-b-2-pitch-8mm-sku-12000500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 05 B-2 pitch 8mm SKU: 12000300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-05-b-2-pitch-8mm-sku-12000300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for roller chain Lambda 24 B-1 SKU: 11077005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-24-b-1-sku-11077005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 24 B-1 SKU: 11077004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-24-b-1-sku-11077004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for roller chain Lambda 24B-1 SKU: 11077002L](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-lambda-24b-1-sku-11077002l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 12 / L for roller chain Neptune 24 B-1 SKU: 11066004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-24-b-1-sku-11066004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 24 B-1 NP pitch 1 1/2x1" nickel-plated SKU: 11066004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-24-b-1-np-pitch-1-1-2x1-nickel-plated-sku-11066004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain similar to 24 B-1 NP pitch 1 1/2x1" nickel-plated SKU: 11066003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-24-b-1-np-pitch-1-1-2x1-nickel-plated-sku-11066003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 10 / S for roller chain Neptune 24 B-1 SKU: 11066002N](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-neptune-24-b-1-sku-11066002n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Inner chain link type 4 / B for roller chain similar to 24 B NP pitch 1 1/2x1" nickel-plated SKU: 11066001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-24-b-np-pitch-1-1-2x1-nickel-plated-sku-11066001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Spider (coupling insert) backlash-free 98 Shore A red size 14 outside diameter 30mm SKU: 60519814](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-14-outside-diameter-30mm-sku-60519814/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 12 outside diameter 25mm SKU: 60519812](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-12-outside-diameter-25mm-sku-60519812/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 55 outside diameter 120mm SKU: 60519255](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-55-outside-diameter-120mm-sku-60519255/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 48 outside diameter 105mm SKU: 60519248](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-48-outside-diameter-105mm-sku-60519248/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 42 outside diameter 95mm SKU: 60519242](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-42-outside-diameter-95mm-sku-60519242/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 38 outside diameter 80mm SKU: 60519238](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-38-outside-diameter-80mm-sku-60519238/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 28 outside diameter 65mm SKU: 60519228](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-28-outside-diameter-65mm-sku-60519228/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 24 outside diameter 55mm SKU: 60519224](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-24-outside-diameter-55mm-sku-60519224/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 19 outside diameter 40mm SKU: 60519219](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-19-outside-diameter-40mm-sku-60519219/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 14 outside diameter 30mm SKU: 60519214](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-14-outside-diameter-30mm-sku-60519214/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 12 outside diameter 25mm SKU: 60519212](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-12-outside-diameter-25mm-sku-60519212/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) fitting to standard and backlash-free 92 Shore A yellow size 9 outside diameter 20mm SKU: 60519209](https://maedler.in/product/spider-coupling-insert-fitting-to-standard-and-backlash-free-92-shore-a-yellow-size-9-outside-diameter-20mm-sku-60519209/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) fitting to standard and backlash-free 92 Shore A yellow size 7 outside diameter 14mm SKU: 60519207](https://maedler.in/product/spider-coupling-insert-fitting-to-standard-and-backlash-free-92-shore-a-yellow-size-7-outside-diameter-14mm-sku-60519207/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 5 outside diameter 10mm SKU: 60519205](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-5-outside-diameter-10mm-sku-60519205/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 64 Shore D green size 55 outside diameter 120mm SKU: 60516455](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-55-outside-diameter-120mm-sku-60516455/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 48 outside diameter 105mm SKU: 60516448](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-48-outside-diameter-105mm-sku-60516448/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 42 outside diameter 95mm SKU: 60516442](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-42-outside-diameter-95mm-sku-60516442/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 38 outside diameter 80mm SKU: 60516438](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-38-outside-diameter-80mm-sku-60516438/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 28 outside diameter 65mm SKU: 60516428](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-28-outside-diameter-65mm-sku-60516428/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 24 outside diameter 55mm SKU: 60516424](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-24-outside-diameter-55mm-sku-60516424/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 19 outside diameter 40mm SKU: 60516419](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-19-outside-diameter-40mm-sku-60516419/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 14 outside diameter 30mm SKU: 60516414](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-14-outside-diameter-30mm-sku-60516414/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 95 Shore A red size 100 outside diameter 225mm SKU: 60509895](https://maedler.in/product/spider-coupling-insert-standard-95-shore-a-red-size-100-outside-diameter-225mm-sku-60509895/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 95 Shore A red size 90 outside diameter 200mm SKU: 60509890](https://maedler.in/product/spider-coupling-insert-standard-95-shore-a-red-size-90-outside-diameter-200mm-sku-60509890/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 95 Shore A red size 75 outside diameter 160mm SKU: 60509875](https://maedler.in/product/spider-coupling-insert-standard-95-shore-a-red-size-75-outside-diameter-160mm-sku-60509875/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 95 Shore A red size 65 outside diameter 135mm SKU: 60509865](https://maedler.in/product/spider-coupling-insert-standard-95-shore-a-red-size-65-outside-diameter-135mm-sku-60509865/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 55 outside diameter 120mm SKU: 60509855](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-55-outside-diameter-120mm-sku-60509855/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 48 outside diameter 105mm SKU: 60509848](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-48-outside-diameter-105mm-sku-60509848/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 42 outside diameter 95mm SKU: 60509842](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-42-outside-diameter-95mm-sku-60509842/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 38 outside diameter 80mm SKU: 60509838](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-38-outside-diameter-80mm-sku-60509838/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 28 outside diameter 65mm SKU: 60509828](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-28-outside-diameter-65mm-sku-60509828/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 24 outside diameter 55mm SKU: 60509824](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-24-outside-diameter-55mm-sku-60509824/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 19 outside diameter 40mm SKU: 60509819](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-19-outside-diameter-40mm-sku-60509819/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 14 outside diameter 30mm SKU: 60509814](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-14-outside-diameter-30mm-sku-60509814/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 92 Shore A yellow size 100 outside diameter 225mm SKU: 60509295](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-100-outside-diameter-225mm-sku-60509295/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 90 outside diameter 200mm SKU: 60509290](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-90-outside-diameter-200mm-sku-60509290/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 75 outside diameter 160mm SKU: 60509275](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-75-outside-diameter-160mm-sku-60509275/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 65 outside diameter 135mm SKU: 60509265](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-65-outside-diameter-135mm-sku-60509265/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 55 outside diameter 120mm SKU: 60509255](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-55-outside-diameter-120mm-sku-60509255/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 48 outside diameter 105mm SKU: 60509248](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-48-outside-diameter-105mm-sku-60509248/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 42 outside diameter 95mm SKU: 60509242](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-42-outside-diameter-95mm-sku-60509242/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 38 outside diameter 80mm SKU: 60509238](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-38-outside-diameter-80mm-sku-60509238/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 28 outside diameter 65mm SKU: 60509228](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-28-outside-diameter-65mm-sku-60509228/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 24 outside diameter 55mm SKU: 60509224](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-24-outside-diameter-55mm-sku-60509224/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 19 outside diameter 40mm SKU: 60509219](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-19-outside-diameter-40mm-sku-60509219/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 14 outside diameter 30mm SKU: 60509214](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-14-outside-diameter-30mm-sku-60509214/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 64 Shore D green size 100 outside diameter 225mm SKU: 60506495](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-100-outside-diameter-225mm-sku-60506495/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 90 outside diameter 200mm SKU: 60506490](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-90-outside-diameter-200mm-sku-60506490/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 75 outside diameter 160mm SKU: 60506475](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-75-outside-diameter-160mm-sku-60506475/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 65 outside diameter 135mm SKU: 60506465](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-65-outside-diameter-135mm-sku-60506465/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 55 outside diameter 120mm SKU: 60506455](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-55-outside-diameter-120mm-sku-60506455/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 48 outside diameter 105mm SKU: 60506448](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-48-outside-diameter-105mm-sku-60506448/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 42 outside diameter 95mm SKU: 60506442](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-42-outside-diameter-95mm-sku-60506442/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 38 outside diameter 80mm SKU: 60506438](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-38-outside-diameter-80mm-sku-60506438/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 28 outside diameter 65mm SKU: 60506428](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-28-outside-diameter-65mm-sku-60506428/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 24 outside diameter 55mm SKU: 60506424](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-24-outside-diameter-55mm-sku-60506424/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 19 outside diameter 40mm SKU: 60506419](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-19-outside-diameter-40mm-sku-60506419/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 14 outside diameter 30mm SKU: 60506414](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-14-outside-diameter-30mm-sku-60506414/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) for coupling DX and DXA size 100 92 Shore SKU: 60420000](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-100-92-shore-sku-60420000/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 85 92 Shore SKU: 60418500](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-85-92-shore-sku-60418500/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 75 92 Shore SKU: 60417500](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-75-92-shore-sku-60417500/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 65 92 Shore SKU: 60416500](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-65-92-shore-sku-60416500/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 60 92 Shore SKU: 60416000](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-60-92-shore-sku-60416000/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 55 92 Shore SKU: 60415500](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-55-92-shore-sku-60415500/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 48 92 Shore SKU: 60414800](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-48-92-shore-sku-60414800/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 42 92 Shore SKU: 60414200](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-42-92-shore-sku-60414200/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 38 92 Shore SKU: 60413800](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-38-92-shore-sku-60413800/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 32 92 Shore SKU: 60413200](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-32-92-shore-sku-60413200/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 28 92 Shore SKU: 60412800](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-28-92-shore-sku-60412800/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 24 92 Shore SKU: 60412400](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-24-92-shore-sku-60412400/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Mounting device module 5 19°31'42" left handed for gear racks 255603xx 255605xx and 255609xx SKU: 25560000](https://maedler.in/product/mounting-device-module-5-193142-left-handed-for-gear-racks-255603xx-255605xx-and-255609xx-sku-25560000/): Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting. - [Mounting device module 4 19°31'42" left handed for gear racks 254603xx, 254605xx and 254609xx SKU: 25460000](https://maedler.in/product/mounting-device-module-4-193142-left-handed-for-gear-racks-254603xx-254605xx-and-254609xx-sku-25460000/): Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting. - [Mounting device module 3 19°31'42" left handed for gear racks 253603xx, 253605xx and 253609xx SKU: 25360000](https://maedler.in/product/mounting-device-module-3-193142-left-handed-for-gear-racks-253603xx-253605xx-and-253609xx-sku-25360000/): Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting. - [Mounting device module 2 19°31'42" left handed for gear racks 251603xx, 251605xx and 251609xx SKU: 25160000](https://maedler.in/product/mounting-device-module-2-193142-left-handed-for-gear-racks-251603xx-251605xx-and-251609xx-sku-25160000/): Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 06 B-2 SKU: 12177004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-06-b-2-sku-12177004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 60 teeth tooth width 12mm SKU: 20506000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-60-teeth-tooth-width-12mm-sku-20506000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm SKU: 20505000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-50-teeth-tooth-width-12mm-sku-20505000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 45 teeth tooth width 12mm SKU: 20504500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-45-teeth-tooth-width-12mm-sku-20504500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 40 teeth tooth width 12mm SKU: 20504000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-40-teeth-tooth-width-12mm-sku-20504000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1,59 (metrical pitch 5mm) 36 teeth tooth width 12mm SKU: 20503600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-159-metrical-pitch-5mm-36-teeth-tooth-width-12mm-sku-20503600/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 30 teeth tooth width 12mm SKU: 20503000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-30-teeth-tooth-width-12mm-sku-20503000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 25 teeth tooth width 12mm SKU: 20502500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-25-teeth-tooth-width-12mm-sku-20502500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 24 teeth tooth width 12mm SKU: 20502400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-24-teeth-tooth-width-12mm-sku-20502400/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 20 teeth tooth width 12mm SKU: 20502000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-20-teeth-tooth-width-12mm-sku-20502000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm SKU: 20501800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-18-teeth-tooth-width-12mm-sku-20501800/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 15 teeth tooth width 12mm SKU: 20501500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-15-teeth-tooth-width-12mm-sku-20501500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 15 teeth tooth width 12mm SKU: 20501200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-15-teeth-tooth-width-12mm-sku-20501200/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Loctite 2700, High Strength Thread Locking, Content 50 ml ================================================= Actual safety data sheet from 30.11.2016 on the internet in the section Downloads ================================================= SKU: 14073117](https://maedler.in/product/loctite-2700-high-strength-thread-locking-content-50-ml-actual-safety-data-sheet-from-30-11-2016-on-the-internet-in-the-section-downloads/): Specifications “White” material safety data sheet without hazard symbols. Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 3 hours. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals WRAS (BS 6920): 1104508. High-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates . Slight contamination is tolerated. Its key differentiator is the “White” Material Safety Data Sheet. LOCTITE 2700 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.ApplicationsAll threaded connections which require high durability against strong vibrations and shocks. - [Loctite 2700, High Strength Thread Locking, Content 5 ml ================================================= Actual safety data sheet from 30.11.2016 on the internet in the section Downloads ================================================= SKU: 14073116](https://maedler.in/product/loctite-2700-high-strength-thread-locking-content-5-ml-actual-safety-data-sheet-from-30-11-2016-on-the-internet-in-the-section-downloads/): Specifications “White” material safety data sheet without hazard symbols. Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 3 hours. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals WRAS (BS 6920): 1104508. High-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates . Slight contamination is tolerated. Its key differentiator is the “White” Material Safety Data Sheet. LOCTITE 2700 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.ApplicationsAll threaded connections which require high durability against strong vibrations and shocks. - [Loctite 2400, Middle Strength Thread Locking, Content 50 ml ================================================= Actual safety data sheet from 01.06.2015 on the internet in the section Downloads ================================================= SKU: 14073115](https://maedler.in/product/loctite-2400-middle-strength-thread-locking-content-50-ml-actual-safety-data-sheet-from-01-06-2015-on-the-internet-in-the-section-downloads/): Specifications “White” material safety data sheet without hazard symbols. Thread size: to M36. Strength: Medium. High chemical resistance. Functional strength (Typical value at 22°C): 2 hours. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals WRAS (BS 6920): 1104507. Medium threadlocker formulated to secure and seal bolts, nuts and studs to prevent loosening due to vibration. It works on all metals and passive substrates. Slight contamination by industrial oils, corrosion prevention oils and cutting fluids is tolerated. Its key differentiator is the “White” Material Safety Data Sheet. LOCTITE 2400 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins. ApplicationsAll threaded connections which require high durability against strong vibrations and shocks. - [Loctite 2400, Middle Strength Thread Locking, Content 5 ml ================================================= Actual safety data sheet from 01.06.2015 on the internet in the section Downloads ================================================= SKU: 14073114](https://maedler.in/product/loctite-2400-middle-strength-thread-locking-content-5-ml-actual-safety-data-sheet-from-01-06-2015-on-the-internet-in-the-section-downloads/): Specifications “White” material safety data sheet without hazard symbols. Thread size: to M36. Strength: Medium. High chemical resistance. Functional strength (Typical value at 22°C): 2 hours. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals WRAS (BS 6920): 1104507. Medium threadlocker formulated to secure and seal bolts, nuts and studs to prevent loosening due to vibration. It works on all metals and passive substrates. Slight contamination by industrial oils, corrosion prevention oils and cutting fluids is tolerated. Its key differentiator is the “White” Material Safety Data Sheet. LOCTITE 2400 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins. ApplicationsAll threaded connections which require high durability against strong vibrations and shocks. - [Replacement chain for chain coupling type 6020 12 A-2 length 20 links including spring clip link SKU: 14036120](https://maedler.in/product/replacement-chain-for-chain-coupling-type-6020-12-a-2-length-20-links-including-spring-clip-link-sku-14036120/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 6018 12 A-2 length 18 links including spring clip link SKU: 14036118](https://maedler.in/product/replacement-chain-for-chain-coupling-type-6018-12-a-2-length-18-links-including-spring-clip-link-sku-14036118/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 5018 10 A-2 length 18 links including spring clip link SKU: 14035118](https://maedler.in/product/replacement-chain-for-chain-coupling-type-5018-10-a-2-length-18-links-including-spring-clip-link-sku-14035118/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 5016 10 A-2 length 16 links including spring clip link SKU: 14035116](https://maedler.in/product/replacement-chain-for-chain-coupling-type-5016-10-a-2-length-16-links-including-spring-clip-link-sku-14035116/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 5014 10 A-2 length 14 links including spring clip link SKU: 14035114](https://maedler.in/product/replacement-chain-for-chain-coupling-type-5014-10-a-2-length-14-links-including-spring-clip-link-sku-14035114/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 4016 08 A-2 length 16 links including spring clip link SKU: 14034116](https://maedler.in/product/replacement-chain-for-chain-coupling-type-4016-08-a-2-length-16-links-including-spring-clip-link-sku-14034116/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 4014 08 A-2 length 14 links including spring clip link SKU: 14034114](https://maedler.in/product/replacement-chain-for-chain-coupling-type-4014-08-a-2-length-14-links-including-spring-clip-link-sku-14034114/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 4012 08 A-2 length 12 links including spring clip link SKU: 14034112](https://maedler.in/product/replacement-chain-for-chain-coupling-type-4012-08-a-2-length-12-links-including-spring-clip-link-sku-14034112/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 3012 06 B-2 length 12 links including spring clip link SKU: 14033112](https://maedler.in/product/replacement-chain-for-chain-coupling-type-3012-06-b-2-length-12-links-including-spring-clip-link-sku-14033112/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Roller chain with bent attachments 08 B-1-K2 2xp attachments wide version on one side SKU: 10500021](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10500021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 6xp attachments slim version on both sides SKU: 10500006](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10500006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 6xp attachments slim version on one side SKU: 10500005](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10500005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 4xp attachments slim version on both sides SKU: 10500004](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10500004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 4xp attachments slim version on one side SKU: 10500003](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10500003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 2xp attachments slim version on both sides SKU: 10500002](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10500002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 2xp attachments slim version on one side SKU: 10500001](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10500001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain connecting link type 11 / E with straight attachments 06 B-1-M2 attachments wide version on both sides stainless steel 1.4301 SKU: 10199352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10199352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M2 attachments wide version on one side stainless steel 1.4301 SKU: 10199351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10199351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10199332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10199332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10199331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10199331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K2 attachments wide version on both sides stainless steel SKU: 10199322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-sku-10199322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10199321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10199321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K1 attachments slim version on both side stainless steel 1.4301 SKU: 10199302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k1-attachments-slim-version-on-both-side-stainless-steel-1-4301-sku-10199302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10199301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10199301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 06 B-1-M2, 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10199052](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10199052/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with straight attachments 06 B-1-M2, 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10199051](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10199051/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with bent attachments 06 B-1-K2, 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10199022](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10199022/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Roller chain with bent attachments 06 B-1-K2, 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10199021](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10199021/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Chain connecting link type 11 / E with straight attachments 06 B-1-M2 attachments wide version on both sides SKU: 10100352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m2-attachments-wide-version-on-both-sides-sku-10100352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M2 attachments wide version on one side SKU: 10100351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m2-attachments-wide-version-on-one-side-sku-10100351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M1 attachments slim version on both sides SKU: 10100332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m1-attachments-slim-version-on-both-sides-sku-10100332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M1 attachments slim version on one side SKU: 10100331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m1-attachments-slim-version-on-one-side-sku-10100331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 06 B-1-K2 attachments wide version on both sides SKU: 10100322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k2-attachments-wide-version-on-both-sides-sku-10100322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K2 attachments wide version on one side SKU: 10100321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k2-attachments-wide-version-on-one-side-sku-10100321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K1 attachments slim version on both side SKU: 10100302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k1-attachments-slim-version-on-both-side-sku-10100302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K1 attachments slim version on one side SKU: 10100301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k1-attachments-slim-version-on-one-side-sku-10100301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 06 B-1-M2, 6xp attachments wide version on both sides SKU: 10100056](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10100056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 6xp attachments wide version on one side SKU: 10100055](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10100055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 4xp attachments wide version on both sides SKU: 10100054](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10100054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 4xp attachments wide version on one side SKU: 10100053](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10100053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 2xp attachments wide version on both sides SKU: 10100052](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10100052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 2xp attachments wide version on one side SKU: 10100051](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10100051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 6xp attachments slim version on both sides SKU: 10100036](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10100036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 6xp attachments slim version on one side SKU: 10100035](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10100035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 4xp attachments slim version on both sides SKU: 10100034](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10100034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 4xp attachments slim version on one side SKU: 10100033](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10100033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 2xp attachments slim version on both sides SKU: 10100032](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10100032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 2xp attachments slim version on one side SKU: 10100031](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10100031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 6xp attachments wide version on both sides SKU: 10100026](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10100026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 6xp attachments wide version on one side SKU: 10100025](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10100025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 4xp attachments wide version on both sides SKU: 10100024](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10100024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 4xp attachments wide version on one side SKU: 10100023](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10100023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 2xp attachments wide version on both sides SKU: 10100022](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10100022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 2xp attachments wide version on one side SKU: 10100021](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10100021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 6xp attachments slim version on both sides SKU: 10100006](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10100006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 6xp attachments slim version on one side SKU: 10100005](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10100005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 4xp attachments slim version on both sides SKU: 10100004](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10100004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 4xp attachments slim version on one side SKU: 10100003](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10100003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 2xp attachments slim version on both sides SKU: 10100002](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10100002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 2xp attachments slim version on one side SKU: 10100001](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10100001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00 SKU: 61240200](https://maedler.in/product/face-spanner-for-two-hole-round-nuts-matching-with-den-sliding-hub-roba-n-612-400-00-and-612-420-00-sku-61240200/): Material: Special Steel, burnished. - [Face spanner for two-hole round nuts matching with sliding hub ROBA 612 380 00 SKU: 61238200](https://maedler.in/product/face-spanner-for-two-hole-round-nuts-matching-with-sliding-hub-roba-612-380-00-sku-61238200/): Material: Special Steel, burnished. - [Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 340 00 and 612 360 00 SKU: 61234200](https://maedler.in/product/face-spanner-for-two-hole-round-nuts-matching-with-den-sliding-hub-roba-n-612-340-00-and-612-360-00-sku-61234200/): Material: Special Steel, burnished. - [Adjustable pin wrench matching with sliding hub ROBA 61231000 and 61232000 SKU: 61231200](https://maedler.in/product/adjustable-pin-wrench-matching-with-sliding-hub-roba-61231000-and-61232000-sku-61231200/): Material: Special Steel, burnished. - [Face spanner for two-hole round nuts matching with sliding hub ROBA 612 300 00 SKU: 61230200](https://maedler.in/product/face-spanner-for-two-hole-round-nuts-matching-with-sliding-hub-roba-612-300-00-sku-61230200/): Material: Special Steel, burnished. - [Disk spring set for sliding hub FA size 8 (32 springs outer diameter 40mm) SKU: 61210802](https://maedler.in/product/disk-spring-set-for-sliding-hub-fa-size-8-32-springs-outer-diameter-40mm-sku-61210802/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring set for sliding hub FA size 7 (24 springs outer diameter 40mm) SKU: 61210702](https://maedler.in/product/disk-spring-set-for-sliding-hub-fa-size-7-24-springs-outer-diameter-40mm-sku-61210702/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring set for sliding hub FA size 6 (16 springs outer diameter 40mm) SKU: 61210602](https://maedler.in/product/disk-spring-set-for-sliding-hub-fa-size-6-16-springs-outer-diameter-40mm-sku-61210602/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA size 5 outer diameter 157.5mm SKU: 61210502](https://maedler.in/product/disk-spring-for-sliding-hub-fa-size-5-outer-diameter-157-5mm-sku-61210502/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA size 4 outer diameter 128.8mm SKU: 61210402](https://maedler.in/product/disk-spring-for-sliding-hub-fa-size-4-outer-diameter-128-8mm-sku-61210402/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA size 3 outer diameter 102mm SKU: 61210302](https://maedler.in/product/disk-spring-for-sliding-hub-fa-size-3-outer-diameter-102mm-sku-61210302/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and FA-K and RNR size 2 outer diameter 79.5mm SKU: 61210202](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-fa-k-and-rnr-size-2-outer-diameter-79-5mm-sku-61210202/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and FA-K and RNR size 1 outer diameter 61.5mm SKU: 61210112](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-fa-k-and-rnr-size-1-outer-diameter-61-5mm-sku-61210112/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and FA-K and RNR size 01 outer diameter 53.2mm SKU: 61210102](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-fa-k-and-rnr-size-01-outer-diameter-53-2mm-sku-61210102/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and FA-K and RNR size 0 outer diameter 42.5mm SKU: 61210012](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-fa-k-and-rnr-size-0-outer-diameter-42-5mm-sku-61210012/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and RNR size 00 outer diameter 30mm SKU: 61210002](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-rnr-size-00-outer-diameter-30mm-sku-61210002/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Adjusting nut for sliding hub FS 612070-612080 SKU: 61207700](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-612070-612080-sku-61207700/): Material: Steel, zinc-plated and passivated. - [Plate spring for sliding hub FS 612070-612080 SKU: 61207600](https://maedler.in/product/plate-spring-for-sliding-hub-fs-612070-612080-sku-61207600/): Material: Special spring-steel. Delivery per piece. - [Bush 22mm for sliding hub FS 612070-612080 SKU: 61207400](https://maedler.in/product/bush-22mm-for-sliding-hub-fs-612070-612080-sku-61207400/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 20,6mm for sliding hub FS 612070-612080 SKU: 61207300](https://maedler.in/product/bush-206mm-for-sliding-hub-fs-612070-612080-sku-61207300/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 17mm for sliding hub FS 612070-612080 SKU: 61207200](https://maedler.in/product/bush-17mm-for-sliding-hub-fs-612070-612080-sku-61207200/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Stellmuttter for sliding hub FS 612050-612060 SKU: 61205700](https://maedler.in/product/stellmuttter-for-sliding-hub-fs-612050-612060-sku-61205700/): Material: Steel, zinc-plated and passivated. - [Plate spring for sliding hub FS 612050-612060 SKU: 61205600](https://maedler.in/product/plate-spring-for-sliding-hub-fs-612050-612060-sku-61205600/): Material: Special spring-steel. Delivery per piece. - [Bush 21,1 for sliding hub FS 612050-612060 SKU: 61205400](https://maedler.in/product/bush-211-for-sliding-hub-fs-612050-612060-sku-61205400/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 19,5 for sliding hub FS 612050-612060 SKU: 61205300](https://maedler.in/product/bush-195-for-sliding-hub-fs-612050-612060-sku-61205300/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 16mm for sliding hub FS 612050-612060 SKU: 61205200](https://maedler.in/product/bush-16mm-for-sliding-hub-fs-612050-612060-sku-61205200/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Adjusting nut for sliding hub FS 612030-612040 SKU: 61203700](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-612030-612040-sku-61203700/): Material: Steel, zinc-plated and passivated. - [Plate spring for sliding hub FS 612030-612040 SKU: 61203600](https://maedler.in/product/plate-spring-for-sliding-hub-fs-612030-612040-sku-61203600/): Material: Special spring-steel. Delivery per piece. - [Bush 21,1 for sliding hub FS 612030-612040 SKU: 61203400](https://maedler.in/product/bush-211-for-sliding-hub-fs-612030-612040-sku-61203400/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 13,7 for sliding hub FS 612030-61240 SKU: 61203300](https://maedler.in/product/bush-137-for-sliding-hub-fs-612030-61240-sku-61203300/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 10,3 for sliding hub FS 612030-612040 SKU: 61203200](https://maedler.in/product/bush-103-for-sliding-hub-fs-612030-612040-sku-61203200/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Adjusting nut for sliding hub FS 612010-612020 SKU: 61201700](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-612010-612020-sku-61201700/): Material: Steel, zinc-plated and passivated. - [Plate spring for sliding hub FS 612010-612020 SKU: 61201600](https://maedler.in/product/plate-spring-for-sliding-hub-fs-612010-612020-sku-61201600/): Material: Special spring-steel. Delivery per piece. - [Bush 13,7 for sliding hub FS 612010-612020 SKU: 61201400](https://maedler.in/product/bush-137-for-sliding-hub-fs-612010-612020-sku-61201400/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 12,2 for sliding hub FS 612010-612020 SKU: 61201300](https://maedler.in/product/bush-122-for-sliding-hub-fs-612010-612020-sku-61201300/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 10,3 for sliding hub FS 612010-612020 SKU: 61201200](https://maedler.in/product/bush-103-for-sliding-hub-fs-612010-612020-sku-61201200/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Plate spring for sliding hub FS 61200500-61200600 SKU: 61200800](https://maedler.in/product/plate-spring-for-sliding-hub-fs-61200500-61200600-sku-61200800/): Material: Special spring-steel. Delivery per piece. - [Adjusting nut for sliding hub FS 61200500 and 61200600 SKU: 61200507](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-61200500-and-61200600-sku-61200507/): Material: Steel, zinc-plated and passivated. - [Bush 4,2 for sliding hub FS 61200500 and 61200600 SKU: 61200502](https://maedler.in/product/bush-42-for-sliding-hub-fs-61200500-and-61200600-sku-61200502/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Plate spring for sliding hub FS 61200000-61200100 SKU: 61200400](https://maedler.in/product/plate-spring-for-sliding-hub-fs-61200000-61200100-sku-61200400/): Material: Special spring-steel. Delivery per piece. - [Adjusting nut for sliding hub FS 61200000 and 61200100 SKU: 61200007](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-61200000-and-61200100-sku-61200007/): Material: Steel, zinc-plated and passivated. - [Bush 4,2 for sliding hub FS 61200000 and 61200100 SKU: 61200002](https://maedler.in/product/bush-42-for-sliding-hub-fs-61200000-and-61200100-sku-61200002/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Spider (coupling insert) backlash-free 98 Shore A red size 55 outside diameter 120mm SKU: 60519855](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-55-outside-diameter-120mm-sku-60519855/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 48 outside diameter 105mm SKU: 60519848](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-48-outside-diameter-105mm-sku-60519848/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 42 outside diameter 95mm SKU: 60519842](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-42-outside-diameter-95mm-sku-60519842/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 38 outside diameter 80mm SKU: 60519838](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-38-outside-diameter-80mm-sku-60519838/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 28 outside diameter 65mm SKU: 60519828](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-28-outside-diameter-65mm-sku-60519828/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 24 outside diameter 55mm SKU: 60519824](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-24-outside-diameter-55mm-sku-60519824/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 19 outside diameter 40mm SKU: 60519819](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-19-outside-diameter-40mm-sku-60519819/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Roller chain with straight attachments 12 B-1-M2 2xp attachments wide version on one side SKU: 10700051](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10700051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 6xp attachments slim version on both sides SKU: 10700036](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10700036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 6xp attachments slim version on one side SKU: 10700035](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10700035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 4xp attachments slim version on both sides SKU: 10700034](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10700034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 4xp attachments slim version on one side SKU: 10700033](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10700033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 2xp attachments slim version on both sides SKU: 10700032](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10700032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 2xp attachments slim version on one side SKU: 10700031](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10700031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 6xp attachments wide version on both sides SKU: 10700026](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10700026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 6xp attachments wide version on one side SKU: 10700025](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10700025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 4xp attachments wide version on both sides SKU: 10700024](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10700024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 4xp attachments wide version on one side SKU: 10700023](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10700023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 2xp attachments wide version on both sides SKU: 10700022](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10700022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 2xp attachments wide version on one side SKU: 10700021](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10700021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 6xp attachments slim version on both sides SKU: 10700006](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10700006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 6xp attachments slim version on one side SKU: 10700005](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10700005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 4xp attachments slim version on both sides SKU: 10700004](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10700004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 4xp attachments slim version on one side SKU: 10700003](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10700003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 2xp attachments slim version on both sides SKU: 10700002](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10700002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 2xp attachments slim version on one side SKU: 10700001](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10700001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain connecting link type 11 / E with straight attachments 10 B-1-M2 attachments wide version on both sides stainless steel 1.4301 SKU: 10699352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10699352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M2 attachments wide version on one side stainless steel 1.4301 SKU: 10699351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10699351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10699332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10699332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10699331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10699331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K2 attachments wide version on both sides stainless steel 1.4301 SKU: 10699322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10699322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10699321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10699321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K1 attachments slim version on both sides stainless steel 1.4301 SKU: 10699302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10699302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10699301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10699301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 10 B-1-M2 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10699052](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10699052/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with straight attachments 10 B-1-M2 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10699051](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10699051/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with bent attachments 10 B-1-K2 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10699022](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10699022/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Roller chain with bent attachments 10 B-1-K2 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10699021](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10699021/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Chain connecting link type 11 / E with straight attachments 10 B-1-M2 attachments wide version on both sides SKU: 10600352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m2-attachments-wide-version-on-both-sides-sku-10600352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M2 attachments wide version on one side SKU: 10600351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m2-attachments-wide-version-on-one-side-sku-10600351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M1 attachments slim version on both sides SKU: 10600332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m1-attachments-slim-version-on-both-sides-sku-10600332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M1 attachments slim version on one side SKU: 10600331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m1-attachments-slim-version-on-one-side-sku-10600331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 10 B-1-K2 attachments wide version on both sides SKU: 10600322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k2-attachments-wide-version-on-both-sides-sku-10600322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K2 attachments wide version on one side SKU: 10600321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k2-attachments-wide-version-on-one-side-sku-10600321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K1 attachments slim version on both sides SKU: 10600302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k1-attachments-slim-version-on-both-sides-sku-10600302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K1 attachments slim version on one side SKU: 10600301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k1-attachments-slim-version-on-one-side-sku-10600301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 10 B-1-M2 6xp attachments wide version on both sides SKU: 10600056](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10600056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 6xp attachments wide version on one side SKU: 10600055](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10600055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 4xp attachments wide version on both sides SKU: 10600054](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10600054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 4xp attachments wide version on one side SKU: 10600053](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10600053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 2xp attachments wide version on both sides SKU: 10600052](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10600052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 2xp attachments wide version on one side SKU: 10600051](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10600051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 6xp attachments slim version on both sides SKU: 10600036](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10600036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 6xp attachments slim version on one side SKU: 10600035](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10600035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 4xp attachments slim version on both sides SKU: 10600034](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10600034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 4xp attachments slim version on one side SKU: 10600033](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10600033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 2xp attachments slim version on both sides SKU: 10600032](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10600032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 2xp attachments slim version on one side SKU: 10600031](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10600031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 6xp attachments wide version on both sides SKU: 10600026](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10600026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 6xp attachments wide version on one side SKU: 10600025](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10600025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 4xp attachments wide version on both sides SKU: 10600024](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10600024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 4xp attachments wide version on one side SKU: 10600023](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10600023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 2xp attachments wide version on both sides SKU: 10600022](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10600022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 2xp attachments wide version on one side SKU: 10600021](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10600021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 6xp attachments slim version on both sides SKU: 10600006](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10600006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 6xp attachments slim version on one side SKU: 10600005](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10600005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 4xp attachments slim version on both sides SKU: 10600004](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10600004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 4xp attachments slim version on one side SKU: 10600003](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10600003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 2xp attachments slim version on both sides SKU: 10600002](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10600002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 2xp attachments slim version on one side SKU: 10600001](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10600001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain connecting link type 11 / E with straight attachments 08 B-1-M2 attachments wide version on both sides stainless steel 1.4301 SKU: 10599352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10599352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M2 attachments wide version on one side stainless steel 1.4301 SKU: 10599351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10599351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10599332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10599332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10599331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10599331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K2 attachments wide version on both sides stainless steel 1.4301 SKU: 10599322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10599322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10599321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10599321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K1 attachments slim version on both sides stainless steel 1.4301 SKU: 10599302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10599302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10599301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10599301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 08 B-1-M2 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10599052](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10599052/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with straight attachments 08 B-1-M2 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10599051](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10599051/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with bent attachments 08 B-1-K2 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10599022](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10599022/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Roller chain with bent attachments 08 B-1-K2 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10599021](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10599021/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Chain connecting link type 11 / E with straight attachments 08 B-1-M2 attachments wide version on both sides SKU: 10500352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m2-attachments-wide-version-on-both-sides-sku-10500352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M2 attachments wide version on one side SKU: 10500351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m2-attachments-wide-version-on-one-side-sku-10500351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M1 attachments slim version on both sides SKU: 10500332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m1-attachments-slim-version-on-both-sides-sku-10500332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M1 attachments slim version on one side SKU: 10500331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m1-attachments-slim-version-on-one-side-sku-10500331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 08 B-1-K2 attachments wide version on both sides SKU: 10500322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k2-attachments-wide-version-on-both-sides-sku-10500322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K2 attachments wide version on one side SKU: 10500321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k2-attachments-wide-version-on-one-side-sku-10500321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K1 attachments slim version on both sides SKU: 10500302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k1-attachments-slim-version-on-both-sides-sku-10500302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K1 attachments slim version on one side SKU: 10500301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k1-attachments-slim-version-on-one-side-sku-10500301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 08 B-1-M2 6xp attachments wide version on both sides SKU: 10500056](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10500056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 6xp attachments wide version on one side SKU: 10500055](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10500055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 4xp attachments wide version on both sides SKU: 10500054](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10500054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 4xp attachments wide version on one side SKU: 10500053](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10500053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 2xp attachments wide version on both sides SKU: 10500052](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10500052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 2xp attachments wide version on one side SKU: 10500051](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10500051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 6xp attachments slim version on both sides SKU: 10500036](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10500036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 6xp attachments slim version on one side SKU: 10500035](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10500035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 4xp attachments slim version on both sides SKU: 10500034](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10500034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 4xp attachments slim version on one side SKU: 10500033](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10500033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 2xp attachments slim version on both sides SKU: 10500032](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10500032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 2xp attachments slim version on one side SKU: 10500031](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10500031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 6xp attachments wide version on both sides SKU: 10500026](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10500026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 6xp attachments wide version on one side SKU: 10500025](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10500025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 4xp attachments wide version on both sides SKU: 10500024](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10500024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 4xp attachments wide version on one side SKU: 10500023](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10500023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 2xp attachments wide version on both sides SKU: 10500022](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10500022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing SKU: 14035014](https://maedler.in/product/chain-coupling-type-5014-10-a-2-14-teeth-nominal-torque-250-nm-with-casing-sku-14035014/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 4016 08 A-2 16 teeth nominal torque 180 Nm with casing SKU: 14034016](https://maedler.in/product/chain-coupling-type-4016-08-a-2-16-teeth-nominal-torque-180-nm-with-casing-sku-14034016/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 4014 08 A-2 14 teeth nominal torque 150 Nm with casing SKU: 14034014](https://maedler.in/product/chain-coupling-type-4014-08-a-2-14-teeth-nominal-torque-150-nm-with-casing-sku-14034014/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 4012 08 A-2 12 teeth nominal torque 110 Nm with casing SKU: 14034012](https://maedler.in/product/chain-coupling-type-4012-08-a-2-12-teeth-nominal-torque-110-nm-with-casing-sku-14034012/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 3012 06 B-2 12 teeth nominal torque 45 Nm with casing SKU: 14033012](https://maedler.in/product/chain-coupling-type-3012-06-b-2-12-teeth-nominal-torque-45-nm-with-casing-sku-14033012/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling pitch 1"x17,02mm 18 teeth nominal torque 1480Nm SKU: 14031600](https://maedler.in/product/chain-coupling-pitch-1x1702mm-18-teeth-nominal-torque-1480nm-sku-14031600/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain coupling pitch 3/4 x 7/16" 18 teeth nominal torque 600Nm SKU: 14031200](https://maedler.in/product/chain-coupling-pitch-3-4-x-7-16-18-teeth-nominal-torque-600nm-sku-14031200/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain coupling pitch 5/8 x 3/8" 18 teeth nominal torque 380Nm SKU: 14030800](https://maedler.in/product/chain-coupling-pitch-5-8-x-3-8-18-teeth-nominal-torque-380nm-sku-14030800/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain coupling pitch 1/2 x 5/16" 18 teeth nominal torque 240Nm SKU: 14030400](https://maedler.in/product/chain-coupling-pitch-1-2-x-5-16-18-teeth-nominal-torque-240nm-sku-14030400/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain coupling pitch 3/8x7/32" 18 teeth nominal torque 95Nm SKU: 14030100](https://maedler.in/product/chain-coupling-pitch-3-8x7-32-18-teeth-nominal-torque-95nm-sku-14030100/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain tensioning wheel KSP 20 B-1 1 1/4x3/4" 13 teeth with ball bearing SKU: 14000900](https://maedler.in/product/chain-tensioning-wheel-ksp-20-b-1-1-1-4x3-4-13-teeth-with-ball-bearing-sku-14000900/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 16 B-1 1"x17,02mm 17 teeth with ball bearing SKU: 14000817](https://maedler.in/product/chain-tensioning-wheel-ksp-16-b-1-1x1702mm-17-teeth-with-ball-bearing-sku-14000817/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 16 B-1 1"x17,02mm 15 teeth with ball bearing SKU: 14000815](https://maedler.in/product/chain-tensioning-wheel-ksp-16-b-1-1x1702mm-15-teeth-with-ball-bearing-sku-14000815/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Mounting screw for chain tensioning wheels 140008xx and 14000900 SKU: 14000801](https://maedler.in/product/mounting-screw-for-chain-tensioning-wheels-140008xx-and-14000900-sku-14000801/): Material: Steel C45. Product No. 140 000 01: matching chain tensioning wheels Product No. 140 000 00 to 140 007 00. Product No. 140 008 01: matching chain tensioning wheel Product No. 140 008 00. - [Chain tensioning wheel KSP 16 B-1 1"x17,02mm 12 teeth with ball bearing SKU: 14000800](https://maedler.in/product/chain-tensioning-wheel-ksp-16-b-1-1x1702mm-12-teeth-with-ball-bearing-sku-14000800/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 12 B-1 3/4x7/16" 16 teeth with ball bearing SKU: 14000716](https://maedler.in/product/chain-tensioning-wheel-ksp-12-b-1-3-4x7-16-16-teeth-with-ball-bearing-sku-14000716/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 12 B-1 3/4x7/16" 13 teeth with ball bearing SKU: 14000713](https://maedler.in/product/chain-tensioning-wheel-ksp-12-b-1-3-4x7-16-13-teeth-with-ball-bearing-sku-14000713/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 12 B-1 3/4x7/16" 12 teeth with ball bearing SKU: 14000712](https://maedler.in/product/chain-tensioning-wheel-ksp-12-b-1-3-4x7-16-12-teeth-with-ball-bearing-sku-14000712/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 12 B-1 3/4x7/16" 15 teeth with ball bearing SKU: 14000700](https://maedler.in/product/chain-tensioning-wheel-ksp-12-b-1-3-4x7-16-15-teeth-with-ball-bearing-sku-14000700/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 21 teeth with ball bearing SKU: 14000621](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-21-teeth-with-ball-bearing-sku-14000621/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 18 teeth with ball bearing SKU: 14000618](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-18-teeth-with-ball-bearing-sku-14000618/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 16 teeth with ball bearing SKU: 14000616](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-16-teeth-with-ball-bearing-sku-14000616/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 15 teeth with ball bearing SKU: 14000615](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-15-teeth-with-ball-bearing-sku-14000615/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 14 teeth with ball bearing SKU: 14000614](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-14-teeth-with-ball-bearing-sku-14000614/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 13 teeth with ball bearing SKU: 14000613](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-13-teeth-with-ball-bearing-sku-14000613/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 17 teeth with ball bearing SKU: 14000600](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-17-teeth-with-ball-bearing-sku-14000600/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 21 teeth with ball bearing SKU: 14000521](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-21-teeth-with-ball-bearing-sku-14000521/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 20 teeth with ball bearing SKU: 14000520](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-20-teeth-with-ball-bearing-sku-14000520/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 16 teeth with ball bearing SKU: 14000516](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-16-teeth-with-ball-bearing-sku-14000516/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 15 teeth with ball bearing SKU: 14000515](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-15-teeth-with-ball-bearing-sku-14000515/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 14 teeth with ball bearing SKU: 14000514](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-14-teeth-with-ball-bearing-sku-14000514/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 18 teeth with ball bearing SKU: 14000500](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-18-teeth-with-ball-bearing-sku-14000500/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 083 1/2x3/16" 16 teeth with ball bearing SKU: 14000316](https://maedler.in/product/chain-tensioning-wheel-ksp-083-1-2x3-16-16-teeth-with-ball-bearing-sku-14000316/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 083 1/2x3/16" 18 teeth with ball bearing SKU: 14000300](https://maedler.in/product/chain-tensioning-wheel-ksp-083-1-2x3-16-18-teeth-with-ball-bearing-sku-14000300/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 081 1/2x1/8" 18 teeth with ball bearing SKU: 14000200](https://maedler.in/product/chain-tensioning-wheel-ksp-081-1-2x1-8-18-teeth-with-ball-bearing-sku-14000200/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 06 B-1 3/8x7/32" 20 teeth with ball bearing SKU: 14000120](https://maedler.in/product/chain-tensioning-wheel-ksp-06-b-1-3-8x7-32-20-teeth-with-ball-bearing-sku-14000120/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 06 B-1 3/8x7/32" 21 teeth with ball bearing SKU: 14000100](https://maedler.in/product/chain-tensioning-wheel-ksp-06-b-1-3-8x7-32-21-teeth-with-ball-bearing-sku-14000100/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [mounting screw for chain tensioning wheels 14000000, 140001xx, 14000200, 140003xx, 140005xx, 140006xx and 140007xx SKU: 14000001](https://maedler.in/product/mounting-screw-for-chain-tensioning-wheels-14000000-140001xx-14000200-140003xx-140005xx-140006xx-and-140007xx-sku-14000001/): Material: Steel C45. Product No. 140 000 01: matching chain tensioning wheels Product No. 140 000 00 to 140 007 00. Product No. 140 008 01: matching chain tensioning wheel Product No. 140 008 00. - [Chain tensioning wheel KSP 05 B-1 pitch 8mm 23 teeth with ball bearing SKU: 14000000](https://maedler.in/product/chain-tensioning-wheel-ksp-05-b-1-pitch-8mm-23-teeth-with-ball-bearing-sku-14000000/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on both sides stainless steel 1.4301 SKU: 10899352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10899352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on one side stainless steel 1.4301 SKU: 10899351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10899351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10899332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10899332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10899331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10899331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K2 attachments wide version on both sides stainless steel 1.4301 SKU: 10899322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10899322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10899321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10899321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on both sides stainless steel 1.4301 SKU: 10899302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10899302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10899301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10899301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on both sides SKU: 10800352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m2-attachments-wide-version-on-both-sides-sku-10800352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on one side SKU: 10800351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m2-attachments-wide-version-on-one-side-sku-10800351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on both sides SKU: 10800332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m1-attachments-slim-version-on-both-sides-sku-10800332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on one side SKU: 10800331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m1-attachments-slim-version-on-one-side-sku-10800331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 16 B-1-K2 attachments wide version on both sides SKU: 10800322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k2-attachments-wide-version-on-both-sides-sku-10800322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K2 attachments wide version on one side SKU: 10800321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k2-attachments-wide-version-on-one-side-sku-10800321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on both sides SKU: 10800302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k1-attachments-slim-version-on-both-sides-sku-10800302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on one side SKU: 10800301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k1-attachments-slim-version-on-one-side-sku-10800301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 16 B-1-M2 6xp attachments wide version on both sides SKU: 10800056](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10800056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 6xp attachments wide version on one side SKU: 10800055](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10800055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 4xp attachments wide version on both sides SKU: 10800054](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10800054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 4xp attachments wide version on one side SKU: 10800053](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10800053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 2xp attachments wide version on both sides SKU: 10800052](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10800052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 2xp attachments wide version on one side SKU: 10800051](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10800051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 6xp attachments slim version on both sides SKU: 10800036](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10800036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 6xp attachments slim version on one side SKU: 10800035](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10800035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 4xp attachments slim version on both sides SKU: 10800034](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10800034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 4xp attachments slim version on one side SKU: 10800033](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10800033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 2xp attachments slim version on both sides SKU: 10800032](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10800032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 2xp attachments slim version on one side SKU: 10800031](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10800031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 6xp attachments wide version on both sides SKU: 10800026](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10800026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 6xp attachments wide version on one side SKU: 10800025](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10800025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 4xp attachments wide version on both sides SKU: 10800024](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10800024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 4xp attachments wide version on one side SKU: 10800023](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10800023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 2xp attachments wide version on both sides SKU: 10800022](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10800022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 2xp attachments wide version on one side SKU: 10800021](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10800021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 6xp attachments slim version on both sides SKU: 10800006](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10800006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 6xp attachments slim version on one side SKU: 10800005](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10800005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 4xp attachments slim version on both sides SKU: 10800004](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10800004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 4xp attachments slim version on one side SKU: 10800003](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10800003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 2xp attachments slim version on both sides SKU: 10800002](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10800002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 2xp attachments slim version on one side SKU: 10800001](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10800001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain connecting link type 11 / E with straight attachements 12 B-1-M2 attachements wide version on both sides stainless steel 1.4301 SKU: 10799352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachements-12-b-1-m2-attachements-wide-version-on-both-sides-stainless-steel-1-4301-sku-10799352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachement 12 B-1-M2 attachement wide version on one side stainless steel 1.4301 SKU: 10799351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachement-12-b-1-m2-attachement-wide-version-on-one-side-stainless-steel-1-4301-sku-10799351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 12 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10799332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-12-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10799332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 12 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10799331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-12-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10799331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K2 attachments wide version on both sides stainless steel 1.4301 SKU: 10799322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10799322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10799321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10799321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on both sides stainless steel 1.4301 SKU: 10799302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10799302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10799301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10799301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachements 12 B-1-M2 attachements wide version on both sides SKU: 10700352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachements-12-b-1-m2-attachements-wide-version-on-both-sides-sku-10700352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachement 12 B-1-M2 attachement wide version on one side SKU: 10700351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachement-12-b-1-m2-attachement-wide-version-on-one-side-sku-10700351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 12 B-1-M1 attachments slim version on both sides SKU: 10700332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-12-b-1-m1-attachments-slim-version-on-both-sides-sku-10700332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 12 B-1-M1 attachments slim version on one side SKU: 10700331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-12-b-1-m1-attachments-slim-version-on-one-side-sku-10700331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 12 B-1-K2 attachments wide version on both sides SKU: 10700322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k2-attachments-wide-version-on-both-sides-sku-10700322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K2 attachments wide version on one side SKU: 10700321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k2-attachments-wide-version-on-one-side-sku-10700321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on both sides SKU: 10700302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k1-attachments-slim-version-on-both-sides-sku-10700302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on one side SKU: 10700301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k1-attachments-slim-version-on-one-side-sku-10700301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 12 B-1-M2 6xp attachments wide version on both sides SKU: 10700056](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10700056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M2 6xp attachments wide version on one side SKU: 10700055](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10700055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M2 4xp attachments wide version on both sides SKU: 10700054](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10700054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M2 4xp attachments wide version on one side SKU: 10700053](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10700053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M2 2xp attachments wide version on both sides SKU: 10700052](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10700052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain tensioner SPANN-BOY® TS 06 B-3 SKU: 14040831](https://maedler.in/product/chain-tensioner-spann-boy-ts-06-b-3-sku-14040831/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 05 B-3 SKU: 14040830](https://maedler.in/product/chain-tensioner-spann-boy-ts-05-b-3-sku-14040830/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 10 B-2 SKU: 14040826](https://maedler.in/product/chain-tensioner-spann-boy-ts-10-b-2-sku-14040826/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 08 B-2 SKU: 14040825](https://maedler.in/product/chain-tensioner-spann-boy-ts-08-b-2-sku-14040825/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 06 B-2 SKU: 14040821](https://maedler.in/product/chain-tensioner-spann-boy-ts-06-b-2-sku-14040821/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 12 B-1 SKU: 14040807](https://maedler.in/product/chain-tensioner-spann-boy-ts-12-b-1-sku-14040807/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 10 B-1 SKU: 14040806](https://maedler.in/product/chain-tensioner-spann-boy-ts-10-b-1-sku-14040806/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 08 B-1 SKU: 14040805](https://maedler.in/product/chain-tensioner-spann-boy-ts-08-b-1-sku-14040805/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS up to 06 B-1 SKU: 14040801](https://maedler.in/product/chain-tensioner-spann-boy-ts-up-to-06-b-1-sku-14040801/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-3 stainless steel SKU: 14040737](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-3-stainless-steel-sku-14040737/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-3 stainless steel SKU: 14040736](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-3-stainless-steel-sku-14040736/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-3 stainless steel SKU: 14040735](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-3-stainless-steel-sku-14040735/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 06 B-3 stainless steel SKU: 14040731](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-06-b-3-stainless-steel-sku-14040731/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 16 B-2 stainless steel SKU: 14040728](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-16-b-2-stainless-steel-sku-14040728/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-2 stainless steel SKU: 14040727](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-2-stainless-steel-sku-14040727/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-2 stainless steel SKU: 14040726](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-2-stainless-steel-sku-14040726/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-2 stainless steel SKU: 14040725](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-2-stainless-steel-sku-14040725/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 06 B-2 stainless steel SKU: 14040721](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-06-b-2-stainless-steel-sku-14040721/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 20 B-1 stainless steel SKU: 14040709](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-20-b-1-stainless-steel-sku-14040709/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 16 B-1 stainless steel SKU: 14040708](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-16-b-1-stainless-steel-sku-14040708/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-1 stainless steel SKU: 14040707](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-1-stainless-steel-sku-14040707/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-1 stainless steel SKU: 14040706](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-1-stainless-steel-sku-14040706/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-1 stainless steel SKU: 14040705](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-1-stainless-steel-sku-14040705/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force up to 06 B-1 stainless steel SKU: 14040701](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-up-to-06-b-1-stainless-steel-sku-14040701/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-3 SKU: 14040637](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-3-sku-14040637/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-3 SKU: 14040636](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-3-sku-14040636/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-3 SKU: 14040635](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-3-sku-14040635/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 06 B-3 SKU: 14040631](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-06-b-3-sku-14040631/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 16 B-2 SKU: 14040628](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-16-b-2-sku-14040628/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-2 SKU: 14040627](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-2-sku-14040627/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-2 SKU: 14040626](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-2-sku-14040626/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-2 SKU: 14040625](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-2-sku-14040625/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 06 B-2 SKU: 14040621](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-06-b-2-sku-14040621/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 20 B-1 SKU: 14040609](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-20-b-1-sku-14040609/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 16 B-1 SKU: 14040608](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-16-b-1-sku-14040608/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-1 SKU: 14040607](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-1-sku-14040607/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-1 SKU: 14040606](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-1-sku-14040606/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-1 SKU: 14040605](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-1-sku-14040605/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force up to 06 B-1 SKU: 14040601](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-up-to-06-b-1-sku-14040601/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-3 stainless steel SKU: 14040537](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-3-stainless-steel-sku-14040537/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-3 stainless steel SKU: 14040536](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-3-stainless-steel-sku-14040536/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-3 stainless steel SKU: 14040535](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-3-stainless-steel-sku-14040535/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 06 B-3 stainless steel SKU: 14040531](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-06-b-3-stainless-steel-sku-14040531/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 16 B-2 stainless steel SKU: 14040528](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-16-b-2-stainless-steel-sku-14040528/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-2 stainless steel SKU: 14040527](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-2-stainless-steel-sku-14040527/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-2 stainless steel SKU: 14040526](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-2-stainless-steel-sku-14040526/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-2 stainless steel SKU: 14040525](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-2-stainless-steel-sku-14040525/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 06 B-2 stainless steel SKU: 14040521](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-06-b-2-stainless-steel-sku-14040521/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 20 B-1 stainless steel SKU: 14040509](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-20-b-1-stainless-steel-sku-14040509/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 16 B-1 stainless steel SKU: 14040508](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-16-b-1-stainless-steel-sku-14040508/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-1 stainless steel SKU: 14040507](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-1-stainless-steel-sku-14040507/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-1 stainless steel SKU: 14040506](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-1-stainless-steel-sku-14040506/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-1 stainless steel SKU: 14040505](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-1-stainless-steel-sku-14040505/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force up to 06 B-1 stainless steel SKU: 14040501](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-up-to-06-b-1-stainless-steel-sku-14040501/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-3 SKU: 14040437](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-3-sku-14040437/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-3 SKU: 14040436](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-3-sku-14040436/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-3 SKU: 14040435](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-3-sku-14040435/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 06 B-3 SKU: 14040431](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-06-b-3-sku-14040431/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 16 B-2 SKU: 14040428](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-16-b-2-sku-14040428/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-2 SKU: 14040427](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-2-sku-14040427/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-2 SKU: 14040426](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-2-sku-14040426/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-2 SKU: 14040425](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-2-sku-14040425/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 06 B-2 SKU: 14040421](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-06-b-2-sku-14040421/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 20 B-1 SKU: 14040409](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-20-b-1-sku-14040409/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 16 B-1 SKU: 14040408](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-16-b-1-sku-14040408/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-1 SKU: 14040407](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-1-sku-14040407/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-1 SKU: 14040406](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-1-sku-14040406/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-1 SKU: 14040405](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-1-sku-14040405/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force up to 06 B-1 SKU: 14040401](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-up-to-06-b-1-sku-14040401/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 12 B-3 SKU: 14040337](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-12-b-3-sku-14040337/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 10 B-3 SKU: 14040336](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-10-b-3-sku-14040336/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 08 B-3 SKU: 14040335](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-08-b-3-sku-14040335/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 06 B-3 SKU: 14040331](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-06-b-3-sku-14040331/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 16 B-2 SKU: 14040328](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-16-b-2-sku-14040328/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.   These ready-to-install tensioners enable noise reduction and wear reduction at chain drives. With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated. With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low. Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm. Interchangeable with similar parts of other suppliers.   Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 12 B-2 SKU: 14040327](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-12-b-2-sku-14040327/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 10 B-2 SKU: 14040326](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-10-b-2-sku-14040326/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 08 B-2 SKU: 14040325](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-08-b-2-sku-14040325/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 06 B-2 SKU: 14040321](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-06-b-2-sku-14040321/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 20 B-1 SKU: 14040309](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-20-b-1-sku-14040309/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 16 B-1 SKU: 14040308](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-16-b-1-sku-14040308/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 12 B-1 SKU: 14040307](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-12-b-1-sku-14040307/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.   These ready-to-install tensioners enable noise reduction and wear reduction at chain drives. With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated. With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low. Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm. Interchangeable with similar parts of other suppliers.   Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 10 B-1 SKU: 14040306](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-10-b-1-sku-14040306/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 08 B-1 SKU: 14040305](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-08-b-1-sku-14040305/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force up to 06 B-1 SKU: 14040301](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-up-to-06-b-1-sku-14040301/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 10 B-2 SKU: 14040226](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-10-b-2-sku-14040226/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 08 B-2 SKU: 14040225](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-08-b-2-sku-14040225/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 06 B-2 SKU: 14040221](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-06-b-2-sku-14040221/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 12 B-1 SKU: 14040207](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-12-b-1-sku-14040207/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 08 B-1 and 10 B-1 SKU: 14040205](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-08-b-1-and-10-b-1-sku-14040205/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force up to 06 B-1 SKU: 14040201](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-up-to-06-b-1-sku-14040201/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force 10 B-2 SKU: 14040126](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-10-b-2-sku-14040126/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force 08 B-2 SKU: 14040125](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-08-b-2-sku-14040125/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force 06 B-2 SKU: 14040121](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-06-b-2-sku-14040121/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force 12 B-1 SKU: 14040107](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-12-b-1-sku-14040107/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® Size 0 low tensioning force 08 B-1 and 10 B-1 SKU: 14040105](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-08-b-1-and-10-b-1-sku-14040105/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force up to 06 B-1 SKU: 14040101](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-up-to-06-b-1-sku-14040101/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain coupling type 6020 12 A-2 20 teeth nominal torque 770 Nm with casing SKU: 14036020](https://maedler.in/product/chain-coupling-type-6020-12-a-2-20-teeth-nominal-torque-770-nm-with-casing-sku-14036020/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing SKU: 14036018](https://maedler.in/product/chain-coupling-type-6018-12-a-2-18-teeth-nominal-torque-630-nm-with-casing-sku-14036018/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 5018 10 A-2 18 teeth nominal torque 380 Nm with casing SKU: 14035018](https://maedler.in/product/chain-coupling-type-5018-10-a-2-18-teeth-nominal-torque-380-nm-with-casing-sku-14035018/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 5016 10 A-2 16 teeth nominal torque 300 Nm with casing SKU: 14035016](https://maedler.in/product/chain-coupling-type-5016-10-a-2-16-teeth-nominal-torque-300-nm-with-casing-sku-14035016/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Tensioning element for front mounting size 4 1500 N SKU: 14080407](https://maedler.in/product/tensioning-element-for-front-mounting-size-4-1500-n-sku-14080407/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements are in general identical to the standard version. For easier mounting they are fixed from the lever side using an in-and-out screw. A thread has to be cut in the machine housing. The supplied screw is secured for transport with an O-Ring. Can be used for both tensioning directions. - [Tensioning element size 4 1500 N zinc plated and oil-resistent SKU: 14080403](https://maedler.in/product/tensioning-element-size-4-1500-n-zinc-plated-and-oil-resistent-sku-14080403/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [support bracket for tensioner size 4 bore A=20.5mm SKU: 14080402](https://maedler.in/product/support-bracket-for-tensioner-size-4-bore-a20-5mm-sku-14080402/): Material: Steel, blue painted.This support enabels an easy mounting of the tensioning element or idler wheel to the machine. The hole A is for fastening the tensioner with it´s central screw. The mounting can be done at the front side or back side of the support. For any other purposes, the both holes B can be used to fix other parts instead of a tensioner. - [support bracket for tensioner size 4 SKU: 14080401](https://maedler.in/product/support-bracket-for-tensioner-size-4-sku-14080401/): Material: Steel, blue painted.This support enabels an easy mounting of the tensioning element or idler wheel to the machine. The hole A is for fastening the tensioner with it´s central screw. The mounting can be done at the front side or back side of the support. For any other purposes, the both holes B can be used to fix other parts instead of a tensioner. - [Tensioning element size 4 1500 N SKU: 14080400](https://maedler.in/product/tensioning-element-size-4-1500-n-sku-14080400/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element Boomerang size 3 405 N SKU: 14080309](https://maedler.in/product/tensioning-element-boomerang-size-3-405-n-sku-14080309/): Material: Housing sintered steel, lever St52. These tensioning elements are used to compensate the slack in extremely long chain drives. The slack length passes in an S-shape through the supplied sprockets or pulleys so that the lever works as a compensator. This system thus offers a triple compensation of the slack compared to standard tensioners. - [Tensioning element for front mounting size 3 810 N SKU: 14080307](https://maedler.in/product/tensioning-element-for-front-mounting-size-3-810-n-sku-14080307/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements are in general identical to the standard version. For easier mounting they are fixed from the lever side using an in-and-out screw. A thread has to be cut in the machine housing. The supplied screw is secured for transport with an O-Ring. Can be used for both tensioning directions. - [Tensioning element size 3 810 N zinc plated and oil-resistent SKU: 14080303](https://maedler.in/product/tensioning-element-size-3-810-n-zinc-plated-and-oil-resistent-sku-14080303/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [Tensioning element size 3 810 N SKU: 14080300](https://maedler.in/product/tensioning-element-size-3-810-n-sku-14080300/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element size 2 350 N bore 16mm SKU: 14080216](https://maedler.in/product/tensioning-element-size-2-350-n-bore-16mm-sku-14080216/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element size 2 350 N bore 12mm SKU: 14080212](https://maedler.in/product/tensioning-element-size-2-350-n-bore-12mm-sku-14080212/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element Boomerang size 2 175 N SKU: 14080209](https://maedler.in/product/tensioning-element-boomerang-size-2-175-n-sku-14080209/): Material: Housing sintered steel, lever St52. These tensioning elements are used to compensate the slack in extremely long chain drives. The slack length passes in an S-shape through the supplied sprockets or pulleys so that the lever works as a compensator. This system thus offers a triple compensation of the slack compared to standard tensioners. - [Tensioning element for front mounting size 2 350 N SKU: 14080207](https://maedler.in/product/tensioning-element-for-front-mounting-size-2-350-n-sku-14080207/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements are in general identical to the standard version. For easier mounting they are fixed from the lever side using an in-and-out screw. A thread has to be cut in the machine housing. The supplied screw is secured for transport with an O-Ring. Can be used for both tensioning directions. - [Tensioning element size 2 350 N zinc plated and oil-resistent SKU: 14080203](https://maedler.in/product/tensioning-element-size-2-350-n-zinc-plated-and-oil-resistent-sku-14080203/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [Tensioning element size 2 350 N SKU: 14080200](https://maedler.in/product/tensioning-element-size-2-350-n-sku-14080200/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element for front mounting size 1 135 N SKU: 14080107](https://maedler.in/product/tensioning-element-for-front-mounting-size-1-135-n-sku-14080107/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements are in general identical to the standard version. For easier mounting they are fixed from the lever side using an in-and-out screw. A thread has to be cut in the machine housing. The supplied screw is secured for transport with an O-Ring. Can be used for both tensioning directions. - [Tensioning element size 1 135 N zinc plated and oil-resistent SKU: 14080103](https://maedler.in/product/tensioning-element-size-1-135-n-zinc-plated-and-oil-resistent-sku-14080103/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [Tensioning element size 1 135 N SKU: 14080100](https://maedler.in/product/tensioning-element-size-1-135-n-sku-14080100/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element size 0 96 N zinc plated and oil-resistent SKU: 14080003](https://maedler.in/product/tensioning-element-size-0-96-n-zinc-plated-and-oil-resistent-sku-14080003/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [Tensioning element size 0 96 N SKU: 14080000](https://maedler.in/product/tensioning-element-size-0-96-n-sku-14080000/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Loctite 7200 Adhesive- and sealant-Remover content 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073420](https://maedler.in/product/loctite-7200-adhesive-and-sealant-remover-content-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073420/): Specifications Aerosol, amber. Active agent: mixture of aliphatic glycol esters etc. Expanding agent: propane gas. Exposure time 10 to 15 min (with silicone 30 Min.). Foam forming, sticks well to vertical surfaces. Removes hardened seals and adhesives from most metal surfaces within 10 to 15 minutes. Resolves and removes mould, lubricants, soot, caked on oil, fat and paint. Can also be applied on wood. Application examples Preparation of metal parts prior to the application of seals sealants. No need to grind away or scrape off old sealings, i.e. no unnecessary damage to the surface finish. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H319 Causes serious eye irritation. - [Loctite 5920 Permanently elastic flange seal Ultra Copper content 300 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073415](https://maedler.in/product/loctite-5920-permanently-elastic-flange-seal-ultra-copper-content-300-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073415/): Specifications Sealing type: liquid (silicon, cupreous). Flange type: flexible. Curing process: air humidity. Temperature resistance: -60 to +315°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: excellent. One-component flange seal that cures at room temperature with excellent temperature resistance. Excellent resistance against motor and gearbox oil. Meets and exceeds manufacturer¿s specifications of GM and Ford. Short term temperature resistance to 350°C. Sealing gaps to 6 mm. Applications Sealing of oil pumps, thermostat housings, waterpumps, oil baths, gearbox covers etc. Ordering details: e.g.: Product No. 140 734 12, Loctite 5920, Cont. 40 ml Danger H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H350 May cause cancer. H371 May cause damage to organs. - [Loctite 5920 Permanently elastic flange seal Ultra Copper Tube 40 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073412](https://maedler.in/product/loctite-5920-permanently-elastic-flange-seal-ultra-copper-tube-40-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073412/): Specifications Sealing type: liquid (silicon, cupreous). Flange type: flexible. Curing process: air humidity. Temperature resistance: -60 to +315°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: excellent. One-component flange seal that cures at room temperature with excellent temperature resistance. Excellent resistance against motor and gearbox oil. Meets and exceeds manufacturer¿s specifications of GM and Ford. Short term temperature resistance to 350°C. Sealing gaps to 6 mm. Applications Sealing of oil pumps, thermostat housings, waterpumps, oil baths, gearbox covers etc. Ordering details: e.g.: Product No. 140 734 12, Loctite 5920, Cont. 40 ml Danger H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H350 May cause cancer. H371 May cause damage to organs. - [Loctite 5910 Permanently elastic adhesive/sealant content 300 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073408](https://maedler.in/product/loctite-5910-permanently-elastic-adhesive-sealant-content-300-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073408/): Specifications Sealing type: liquid (silicon, black). Flange type: flexible. Curing process: air humidity. Non sticky: 20 min Temperature resistance: + 200°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: medium. Permanently elastic flange sealant for non torsionally rigid flange seals. Low odour, little gas emission. Curing at room temperature. High resistance to vibration. Can also be used on plastic parts. Bondline gap to 6 mm. Applications Sealing of non torsionally rigid flanges which require high oil and vibration resistance, e.g. aluminium oil baths and controller housing covers. Ordering details: e.g.: Product No. 140 734 07, Loctite 5910, Cont. 50 ml Danger H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H350 May cause cancer. H371 May cause damage to organs. - [Loctite 5910 Permanently elastic adhesive/sealant content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073407](https://maedler.in/product/loctite-5910-permanently-elastic-adhesive-sealant-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073407/): Specifications Sealing type: liquid (silicon, black). Flange type: flexible. Curing process: air humidity. Non sticky: 20 min Temperature resistance: + 200°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: medium. Permanently elastic flange sealant for non torsionally rigid flange seals. Low odour, little gas emission. Curing at room temperature. High resistance to vibration. Can also be used on plastic parts. Bondline gap to 6 mm. Applications Sealing of non torsionally rigid flanges which require high oil and vibration resistance, e.g. aluminium oil baths and controller housing covers. Ordering details: e.g.: Product No. 140 734 07, Loctite 5910, Cont. 50 ml Danger H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H350 May cause cancer. H371 May cause damage to organs. - [Loctite 518 Medium strength standard flange sealant content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073402](https://maedler.in/product/loctite-518-medium-strength-standard-flange-sealant-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073402/): Specifications Sealing type: Liquid (acrylic, red). Flange type: torsionally rigid. Curing type: anaerobic. Temperature resistance: -55 to +150°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: excellent. One-component, medium strength flange sealant. The curing takes place on metal contact as anaerobic process. Fast curing at room temperature. Not recommended for plastic parts. Seals instantly at low pressure. Bondline gap to 0.5 mm. Applications Sealing of dimensionally stable flange connections as, e.g., engine and gearbox cover, water-pump flanges and controller housing covers. Ordering details: e.g.: Product No. 140 734 02, Loctite 518, Cont. 50 ml Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H410 Very toxic to aquatic life with long lasting effects. - [Loctite 4850 Flexible instant adhesive content 20 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073326](https://maedler.in/product/loctite-4850-flexible-instant-adhesive-content-20-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073326/): Specifications Temperature range: to 70°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity mPa.s: 400. Especially suited for: flexible materials. Approvals P1 NSF Reg. No.: 123011. Flexible instant adhesive with medium viscosity. Rapid setting, transparent. Especially suited for the assembly and repair of flexible materials and components. Application examples Bonding of materials for the production and repair of flexible seals and sleeves or the mounting of elastic components. Ordering details: e.g.: Product No. 140 733 24, Loctite 4850, Cont. 5 g Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 4850 Flexible instant adhesive content 5 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073324](https://maedler.in/product/loctite-4850-flexible-instant-adhesive-content-5-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073324/): Specifications Temperature range: to 70°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity mPa.s: 400. Especially suited for: flexible materials. Approvals P1 NSF Reg. No.: 123011. Flexible instant adhesive with medium viscosity. Rapid setting, transparent. Especially suited for the assembly and repair of flexible materials and components. Application examples Bonding of materials for the production and repair of flexible seals and sleeves or the mounting of elastic components. Ordering details: e.g.: Product No. 140 733 24, Loctite 4850, Cont. 5 g Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 454 Universal instant adhesive non-drip gel content 20 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073318](https://maedler.in/product/loctite-454-universal-instant-adhesive-non-drip-gel-content-20-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073318/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity: gel. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123009. Universal, instant adhesive gel can be used for bonding metals, composite materials, wood, cork, foam plastic, leather, cardboard, paper and ceramics. Good gap filling capability. Recommended for use on vertical surfaces or when working overhead. Can also be used with automated processing systems. Application examples Bonding rubber door stops onto walls. Bonding plastic signs onto wooden doors. Bonding rubber treads onto the steps of an aluminium ladder. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 454 Universal instant adhesive non-drip gel content 10 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073317](https://maedler.in/product/loctite-454-universal-instant-adhesive-non-drip-gel-content-10-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073317/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity: gel. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123009. Universal, instant adhesive gel can be used for bonding metals, composite materials, wood, cork, foam plastic, leather, cardboard, paper and ceramics. Good gap filling capability. Recommended for use on vertical surfaces or when working overhead. Can also be used with automated processing systems. Application examples Bonding rubber door stops onto walls. Bonding plastic signs onto wooden doors. Bonding rubber treads onto the steps of an aluminium ladder. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 454 Universal instant adhesive non-drip gel content 3 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073316](https://maedler.in/product/loctite-454-universal-instant-adhesive-non-drip-gel-content-3-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073316/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity: gel. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123009. Universal, instant adhesive gel can be used for bonding metals, composite materials, wood, cork, foam plastic, leather, cardboard, paper and ceramics. Good gap filling capability. Recommended for use on vertical surfaces or when working overhead. Can also be used with automated processing systems. Application examples Bonding rubber door stops onto walls. Bonding plastic signs onto wooden doors. Bonding rubber treads onto the steps of an aluminium ladder. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 406 instant adhesive for plastic and rubber content 20 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073309](https://maedler.in/product/loctite-406-instant-adhesive-for-plastic-and-rubber-content-20-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073309/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 10-20 sec. Viscosity mPa.s: 20. Especially suited for: plastics. Special instant adhesive for fast bonding of rubbers (incl. EPDM), plastics and elastomers. In combination with the primer Loctite 7239 even hard to bond plastics can be bonded. Application examples Bonding a silicon rubber piece onto a plastic housing in a car locking unit. Bonding a plastic part onto a fire extinguisher. Producing O-rings with the Loctite O-ring set. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 401 Universal instant adhesive content 20 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073305](https://maedler.in/product/loctite-401-universal-instant-adhesive-content-20-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073305/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity mPa.s: 110. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123011. Universal instant adhesive. Bonds almost all materials as, e.g., plastics, elastomers, metals, paper, cardboard, wood. Application examples Bonding a PVC seal onto an ABS housing when manufacturing car mirrors. Bonding foam rubber onto a steel or plastic housing. Bonding PVC foils onto paper when producing packaging materials. Bonding small plastic parts onto wood, e.g., in the furniture industry. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 401 Universal instant adhesive content 5 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073304](https://maedler.in/product/loctite-401-universal-instant-adhesive-content-5-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073304/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity mPa.s: 110. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123011. Universal instant adhesive. Bonds almost all materials as, e.g., plastics, elastomers, metals, paper, cardboard, wood. Application examples Bonding a PVC seal onto an ABS housing when manufacturing car mirrors. Bonding foam rubber onto a steel or plastic housing. Bonding PVC foils onto paper when producing packaging materials. Bonding small plastic parts onto wood, e.g., in the furniture industry. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 648 Retaining compound with high temperature resistance content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073214](https://maedler.in/product/loctite-648-retaining-compound-with-high-temperature-resistance-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073214/): Specifications Strength: High. Handling strength (at room temperature on steel): after 5 min. Functional strength (Typical value at 22°C): min. 6 hrs. Bondline gap: To 0.15 mm. Temperature resistance: +175°C. Universal bonding product for metal, temperature resistant to +175°C. Capable of filling gaps up to 0.15 mm.Handling strength after only 5 minutes.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts, in applications where high operating temperatures prevail. Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 648 Retaining compound with high temperature resistance content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073213](https://maedler.in/product/loctite-648-retaining-compound-with-high-temperature-resistance-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073213/): Specifications Strength: High. Handling strength (at room temperature on steel): after 5 min. Functional strength (Typical value at 22°C): min. 6 hrs. Bondline gap: To 0.15 mm. Temperature resistance: +175°C. Universal bonding product for metal, temperature resistant to +175°C. Capable of filling gaps up to 0.15 mm.Handling strength after only 5 minutes.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts, in applications where high operating temperatures prevail. Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 638 Retaining compound for large gaps content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073208](https://maedler.in/product/loctite-638-retaining-compound-for-large-gaps-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073208/): Specifications Strength: High. Handling strength (at room temperature on steel): after 5 min. Functional strength (Typical value at 22°C): min. 6 hrs. Bondline gap: To 0.25 mm. Temperature resistance: +150°C. Approvals KTW recommendation. DVGW approval. P1 NSF Reg. No.: 123010. Special bonding product for metal highly capable of filling gaps and fast reached handling strength.For gaps up to 0.25 mm.Temperature resistant to + 150°C.Handling strength after only 5 minutes.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts with bondline gap to 0.25 mm. Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 638 Retaining compound for large gaps content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073207](https://maedler.in/product/loctite-638-retaining-compound-for-large-gaps-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073207/): Specifications Strength: High. Handling strength (at room temperature on steel): after 5 min. Functional strength (Typical value at 22°C): min. 6 hrs. Bondline gap: To 0.25 mm. Temperature resistance: +150°C. Approvals KTW recommendation. DVGW approval. P1 NSF Reg. No.: 123010. Special bonding product for metal highly capable of filling gaps and fast reached handling strength.For gaps up to 0.25 mm.Temperature resistant to + 150°C.Handling strength after only 5 minutes.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts with bondline gap to 0.25 mm. Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 603 Retaining compound oil-Tolerant content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073203](https://maedler.in/product/loctite-603-retaining-compound-oil-tolerant-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073203/): Specifications Strength: High. Handling strength (at room temperature on steel): after 10 min. Functional strength (Typical value at 22°C): min. 12 hrs. Bondline gap: to 0.1 mm. Temperature resistance: +150°C. Approvals P1 NSF Reg. No.: 123003. Tested and recommended by leading roller bearing manufacturers. Oil-tolerant, universal bonding product for metal.Tolerates oil-based contaminations. Especially suited for the mounting of bearings (bondline gap to 0.1 mm). Rapid setting with high strength.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts with small bondline gap (to 0.1 mm). Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 603 Retaining compound oil-Tolerant content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073202](https://maedler.in/product/loctite-603-retaining-compound-oil-tolerant-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073202/): Specifications Strength: High. Handling strength (at room temperature on steel): after 10 min. Functional strength (Typical value at 22°C): min. 12 hrs. Bondline gap: to 0.1 mm. Temperature resistance: +150°C. Approvals P1 NSF Reg. No.: 123003. Tested and recommended by leading roller bearing manufacturers. Oil-tolerant, universal bonding product for metal.Tolerates oil-based contaminations. Especially suited for the mounting of bearings (bondline gap to 0.1 mm). Rapid setting with high strength.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts with small bondline gap (to 0.1 mm). Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 2701 Maximum strength thread locking content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073119](https://maedler.in/product/loctite-2701-maximum-strength-thread-locking-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073119/): Specifications Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 6 hrs. Breakaway torque tested according to ISO 10964: 38 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals P1 NSF Reg. No.: 123006. Maximum strength thread locking for all threaded connections made from metal, including passive materials, such as high-alloyed steel. Ideal for threaded connections exposed to strong vibrations and shocks, e.g. studs on motors or pumps etc.When disassembling the parts, the connection should be heated to 250°C.ApplicationsAll threaded connections which require high durability against strong vibrations and shocks or extreme environmental or chemical influences. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 2701 Maximum strength thread locking content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073118](https://maedler.in/product/loctite-2701-maximum-strength-thread-locking-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073118/): Specifications Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 6 hrs. Breakaway torque tested according to ISO 10964: 38 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals P1 NSF Reg. No.: 123006. Maximum strength thread locking for all threaded connections made from metal, including passive materials, such as high-alloyed steel. Ideal for threaded connections exposed to strong vibrations and shocks, e.g. studs on motors or pumps etc.When disassembling the parts, the connection should be heated to 250°C.ApplicationsAll threaded connections which require high durability against strong vibrations and shocks or extreme environmental or chemical influences. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 290 Post-assembly thread locking medium strength content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073113](https://maedler.in/product/loctite-290-post-assembly-thread-locking-medium-strength-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073113/): Specifications Thread size: to M12. Strength: Medium. Functional strength (Typical value at 22°C): 3 hrs. Breakaway torque tested according to ISO 10964: 10 Nm. Long-term temperature resistance: -55°C to +150°C. For post-assembly thread locking (medium strength). For metal threads. Because of its low viscosity, the product penetrates into the threads, to size M12. When disassembling the parts, the connection should be heated to 250°C.ApplicationsPrefabricated connections, carburetor screws, adjusting screws, screws at maintenance access etc. Attention H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 290 Post-assembly thread locking medium strength content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073112](https://maedler.in/product/loctite-290-post-assembly-thread-locking-medium-strength-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073112/): Specifications Thread size: to M12. Strength: Medium. Functional strength (Typical value at 22°C): 3 hrs. Breakaway torque tested according to ISO 10964: 10 Nm. Long-term temperature resistance: -55°C to +150°C. For post-assembly thread locking (medium strength). For metal threads. Because of its low viscosity, the product penetrates into the threads, to size M12. When disassembling the parts, the connection should be heated to 250°C.ApplicationsPrefabricated connections, carburetor screws, adjusting screws, screws at maintenance access etc. Attention H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 270, High Strength Thread Locking, Content 50 ml ================================================= Actual safety data sheet from 21.02.2020 on the internet in the section Downloads ================================================= SKU: 14073110](https://maedler.in/product/loctite-270-high-strength-thread-locking-content-50-ml-actual-safety-data-sheet-from-21-02-2020-on-the-internet-in-the-section-downloads/): Specifications Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 3 hours. Breakaway torque tested according to ISO 10964: 33 Nm. Long-term temperature resistance: -55°C to +180°C. Approvals P1 NSF Reg. No.: 123006. High-strength threadlocker for maximum efficacy in securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C. All threaded connections which require high durability against strong vibrations and shocks or extreme environmental or chemical influences. Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H411 Toxic to aquatic life with long lasting effects. - [Loctite 270, High Strength Thread Locking, Content 10 ml ================================================= Actual safety data sheet from 21.02.2020 on the internet in the section Downloads ================================================= SKU: 14073109](https://maedler.in/product/loctite-270-high-strength-thread-locking-content-10-ml-actual-safety-data-sheet-from-21-02-2020-on-the-internet-in-the-section-downloads/): Specifications Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 3 hours. Breakaway torque tested according to ISO 10964: 33 Nm. Long-term temperature resistance: -55°C to +180°C. Approvals P1 NSF Reg. No.: 123006. High-strength threadlocker for maximum efficacy in securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C. All threaded connections which require high durability against strong vibrations and shocks or extreme environmental or chemical influences. Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H411 Toxic to aquatic life with long lasting effects. - [Loctite 243 Medium strength thread locking content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073108](https://maedler.in/product/loctite-243-medium-strength-thread-locking-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073108/): Specifications Thread size: to M36. Strength: Medium. Functional strength (Typical value at 22°C): 2 hrs. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +180°C. Approvals P1 NSF Reg. No.: 123000. Certified to ANSI/NSF. Standard 61. Medium strength thread locking for all threaded connections made from metal to M36.Tolerates low oil-based contaminations. The connections can be unfastened using normal tools. ApplicationsLocks and prevents loosening from vibration on parts such as screws, nuts and studs, e.g., on motors, gearboxes and housings. Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 243 Medium strength thread locking content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073107](https://maedler.in/product/loctite-243-medium-strength-thread-locking-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073107/): Specifications Thread size: to M36. Strength: Medium. Functional strength (Typical value at 22°C): 2 hrs. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +180°C. Approvals P1 NSF Reg. No.: 123000. Certified to ANSI/NSF. Standard 61. Medium strength thread locking for all threaded connections made from metal to M36.Tolerates low oil-based contaminations. The connections can be unfastened using normal tools. ApplicationsLocks and prevents loosening from vibration on parts such as screws, nuts and studs, e.g., on motors, gearboxes and housings. Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 222 Low-strength thread locking content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073102](https://maedler.in/product/loctite-222-low-strength-thread-locking-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073102/): Specifications Thread size: to M36. Strength: Low. Functional strength (Typical value at 22°C): 6 hrs. Breakaway torque tested according to ISO 10964: 6 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals P1 NSF Reg. No.: 123002. Low-strength thread locking for all threaded connections made from metal to M36. The connections can be unfastened using normal tools. Applications Ideal for adjusting screws, screws at maintenance access, carburetor screws etc.. Also suitable for metals which might brake during disassembly. Attention H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 222 Low-strength thread locking content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073101](https://maedler.in/product/loctite-222-low-strength-thread-locking-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073101/): Specifications Thread size: to M36. Strength: Low. Functional strength (Typical value at 22°C): 6 hrs. Breakaway torque tested according to ISO 10964: 6 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals P1 NSF Reg. No.: 123002. Low-strength thread locking for all threaded connections made from metal to M36. The connections can be unfastened using normal tools. Applications Ideal for adjusting screws, screws at maintenance access, carburetor screws etc.. Also suitable for metals which might brake during disassembly. Attention H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Sprocket set for chain tensioners, triple 12 B-3 3/4" x 7/16" Z=15 SKU: 14053701](https://maedler.in/product/sprocket-set-for-chain-tensioners-triple-12-b-3-3-4-x-7-16-z15-sku-14053701/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temerature range: -20° to +120°C. - [chain-stretcher for triplex roller chain 3/4X7/16" , set of 14053701 + 14080400 SKU: 14053700](https://maedler.in/product/chain-stretcher-for-triplex-roller-chain-3-4x7-16-set-of-14053701-14080400-sku-14053700/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, triple 10 B-3 5/8" x 3/8" Z=15 SKU: 14053601](https://maedler.in/product/sprocket-set-for-chain-tensioners-triple-10-b-3-5-8-x-3-8-z15-sku-14053601/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temerature range: -20° to +120°C. - [chain-stretcher for triplex roller chain 5/8X3/8" , set of 14053601 + 14080300 SKU: 14053600](https://maedler.in/product/chain-stretcher-for-triplex-roller-chain-5-8x3-8-set-of-14053601-14080300-sku-14053600/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, triple 08 B-3 1/2" x 5/16" Z=15 SKU: 14053501](https://maedler.in/product/sprocket-set-for-chain-tensioners-triple-08-b-3-1-2-x-5-16-z15-sku-14053501/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temerature range: -20° to +120°C. - [chain-stretcher for triplex roller chain 1/2X5/16" , set of 14053501 + 14080200 SKU: 14053500](https://maedler.in/product/chain-stretcher-for-triplex-roller-chain-1-2x5-16-set-of-14053501-14080200-sku-14053500/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, triple 06 B-3 3/8" x 7/32" Z=15 SKU: 14053101](https://maedler.in/product/sprocket-set-for-chain-tensioners-triple-06-b-3-3-8-x-7-32-z15-sku-14053101/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temerature range: -20° to +120°C. - [chain-stretcher for triplex roller chain 3/8X7/32" , set of 14053101 + 14080200 SKU: 14053100](https://maedler.in/product/chain-stretcher-for-triplex-roller-chain-3-8x7-32-set-of-14053101-14080200-sku-14053100/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 16 B-2 1" x 17,02mm Z=13 SKU: 14052801](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-16-b-2-1-x-1702mm-z13-sku-14052801/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 1"x17,02mm , set of 14052801 + 14080400 SKU: 14052800](https://maedler.in/product/chain-stretcher-for-double-roller-chain-1x1702mm-set-of-14052801-14080400-sku-14052800/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 12 B-2 3/4" x 7/16" Z=15 SKU: 14052701](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-12-b-2-3-4-x-7-16-z15-sku-14052701/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 3/4X7/16" , set of 14052701 + 14080300 SKU: 14052700](https://maedler.in/product/chain-stretcher-for-double-roller-chain-3-4x7-16-set-of-14052701-14080300-sku-14052700/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 10 B-2 5/8" x 3/8" Z=15 SKU: 14052601](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-10-b-2-5-8-x-3-8-z15-sku-14052601/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 5/8X3/8" , set of 14052601 + 14080300 SKU: 14052600](https://maedler.in/product/chain-stretcher-for-double-roller-chain-5-8x3-8-set-of-14052601-14080300-sku-14052600/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 08 B-2 1/2" x 5/16" Z=15 SKU: 14052501](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-08-b-2-1-2-x-5-16-z15-sku-14052501/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 1/2X5/16" , set of 14052501 + 14080200 SKU: 14052500](https://maedler.in/product/chain-stretcher-for-double-roller-chain-1-2x5-16-set-of-14052501-14080200-sku-14052500/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 06 B-2 3/8" x 7/32" Z=15 SKU: 14052101](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-06-b-2-3-8-x-7-32-z15-sku-14052101/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 3/8X7/32" , set of 14052101 + 14080200 SKU: 14052100](https://maedler.in/product/chain-stretcher-for-double-roller-chain-3-8x7-32-set-of-14052101-14080200-sku-14052100/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 16 B-1 1" x 17,02mm Z=13 SKU: 14050801](https://maedler.in/product/sprocket-set-for-chain-tensioners-16-b-1-1-x-1702mm-z13-sku-14050801/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 1"x17,02mm , set of 14050801 + 14080400 SKU: 14050800](https://maedler.in/product/chain-stretcher-for-roller-chain-1x1702mm-set-of-14050801-14080400-sku-14050800/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 12 B-1 3/4" x 7/16" Z=15 SKU: 14050701](https://maedler.in/product/sprocket-set-for-chain-tensioners-12-b-1-3-4-x-7-16-z15-sku-14050701/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 3/4X7/16" , set of 14050701 + 14080300 SKU: 14050700](https://maedler.in/product/chain-stretcher-for-roller-chain-3-4x7-16-set-of-14050701-14080300-sku-14050700/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 10 B-1 5/8" x 3/8" Z=15 SKU: 14050601](https://maedler.in/product/sprocket-set-for-chain-tensioners-10-b-1-5-8-x-3-8-z15-sku-14050601/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 5/8X3/8" , set of 14050601 + 14080300 SKU: 14050600](https://maedler.in/product/chain-stretcher-for-roller-chain-5-8x3-8-set-of-14050601-14080300-sku-14050600/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 08 B-1 1/2" x 5/16" Z=15 SKU: 14050501](https://maedler.in/product/sprocket-set-for-chain-tensioners-08-b-1-1-2-x-5-16-z15-sku-14050501/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 1/2X5/16" , set of 14050501 + 14080200 SKU: 14050500](https://maedler.in/product/chain-stretcher-for-roller-chain-1-2x5-16-set-of-14050501-14080200-sku-14050500/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 083 1/2" x 3/16" Z=18 SKU: 14050301](https://maedler.in/product/sprocket-set-for-chain-tensioners-083-1-2-x-3-16-z18-sku-14050301/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 1/2X3/16" , set of 14050301 + 14080216 SKU: 14050300](https://maedler.in/product/chain-stretcher-for-roller-chain-1-2x3-16-set-of-14050301-14080216-sku-14050300/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 081 1/2" x 1/8" Z=18 SKU: 14050201](https://maedler.in/product/sprocket-set-for-chain-tensioners-081-1-2-x-1-8-z18-sku-14050201/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 1/2X1/8" , set of 14050201 + 14080216 SKU: 14050200](https://maedler.in/product/chain-stretcher-for-roller-chain-1-2x1-8-set-of-14050201-14080216-sku-14050200/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 06 B-1 3/8" x 7/32" Z=15 SKU: 14050101](https://maedler.in/product/sprocket-set-for-chain-tensioners-06-b-1-3-8-x-7-32-z15-sku-14050101/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 3/8 x 7/32" , set of 14050101 + 14080200 SKU: 14050100](https://maedler.in/product/chain-stretcher-for-roller-chain-3-8-x-7-32-set-of-14050101-14080200-sku-14050100/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Chain tensioner SPANN-BOY® TS-EP 06 B-3 SKU: 14041831](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-06-b-3-sku-14041831/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 05 B-3 SKU: 14041830](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-05-b-3-sku-14041830/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 10 B-2 SKU: 14041826](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-10-b-2-sku-14041826/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 08 B-2 SKU: 14041825](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-08-b-2-sku-14041825/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 06 B-2 SKU: 14041821](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-06-b-2-sku-14041821/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 12 B-1 SKU: 14041807](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-12-b-1-sku-14041807/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 10 B-1 SKU: 14041806](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-10-b-1-sku-14041806/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 08 B-1 SKU: 14041805](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-08-b-1-sku-14041805/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP up to 06 B-1 SKU: 14041800](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-up-to-06-b-1-sku-14041800/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 06 B-3 stainless steel SKU: 14040931](https://maedler.in/product/chain-tensioner-spann-boy-ts-06-b-3-stainless-steel-sku-14040931/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 05 B-3 stainless steel SKU: 14040930](https://maedler.in/product/chain-tensioner-spann-boy-ts-05-b-3-stainless-steel-sku-14040930/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 10 B-2 stainless steel SKU: 14040926](https://maedler.in/product/chain-tensioner-spann-boy-ts-10-b-2-stainless-steel-sku-14040926/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 08 B-2 stainless steel SKU: 14040925](https://maedler.in/product/chain-tensioner-spann-boy-ts-08-b-2-stainless-steel-sku-14040925/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 06 B-2 stainless steel SKU: 14040921](https://maedler.in/product/chain-tensioner-spann-boy-ts-06-b-2-stainless-steel-sku-14040921/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 12 B-1 stainless steel SKU: 14040907](https://maedler.in/product/chain-tensioner-spann-boy-ts-12-b-1-stainless-steel-sku-14040907/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 10 B-1 stainless steel SKU: 14040906](https://maedler.in/product/chain-tensioner-spann-boy-ts-10-b-1-stainless-steel-sku-14040906/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 08 B-1 stainless steel SKU: 14040905](https://maedler.in/product/chain-tensioner-spann-boy-ts-08-b-1-stainless-steel-sku-14040905/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS up to 06 B-1 stainless steel SKU: 14040901](https://maedler.in/product/chain-tensioner-spann-boy-ts-up-to-06-b-1-stainless-steel-sku-14040901/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Spur gear made of steel 11SMnPb30 with hub module 0.5 20 teeth tooth width 4mm outside diameter 11mm SKU: 21102000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-20-teeth-tooth-width-4mm-outside-diameter-11mm-sku-21102000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 19 teeth tooth width 4mm outside diameter 10.5mm SKU: 21101900](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-19-teeth-tooth-width-4mm-outside-diameter-10-5mm-sku-21101900/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 18 teeth tooth width 4mm outside diameter 10mm SKU: 21101800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-18-teeth-tooth-width-4mm-outside-diameter-10mm-sku-21101800/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 17 teeth tooth width 4mm outside diameter 9.5mm SKU: 21101700](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-17-teeth-tooth-width-4mm-outside-diameter-9-5mm-sku-21101700/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 16 teeth tooth width 4mm outside diameter 9mm SKU: 21101600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-16-teeth-tooth-width-4mm-outside-diameter-9mm-sku-21101600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 15 teeth tooth width 4mm outside diameter 8.5mm SKU: 21101500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-15-teeth-tooth-width-4mm-outside-diameter-8-5mm-sku-21101500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 14 teeth tooth width 4mm outside diameter 8mm SKU: 21101400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-14-teeth-tooth-width-4mm-outside-diameter-8mm-sku-21101400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 13 teeth tooth width 4mm outside diameter 7mm SKU: 21101300](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-13-teeth-tooth-width-4mm-outside-diameter-7mm-sku-21101300/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 12 teeth tooth width 4mm outside diameter 7mm SKU: 21101200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-12-teeth-tooth-width-4mm-outside-diameter-7mm-sku-21101200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 10 teeth tooth width 4mm outside diameter 6mm SKU: 21101000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-10-teeth-tooth-width-4mm-outside-diameter-6mm-sku-21101000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 60 teeth tooth width 25mm SKU: 21099060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-60-teeth-tooth-width-25mm-sku-21099060/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 50 teeth tooth width 25mm SKU: 21099050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-50-teeth-tooth-width-25mm-sku-21099050/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 45 teeth tooth width 25mm SKU: 21099045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-45-teeth-tooth-width-25mm-sku-21099045/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 40 teeth tooth width 25mm SKU: 21099040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-40-teeth-tooth-width-25mm-sku-21099040/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 36 teeth tooth width 25mm SKU: 21099036](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-36-teeth-tooth-width-25mm-sku-21099036/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 30 teeth tooth width 25mm SKU: 21099030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-30-teeth-tooth-width-25mm-sku-21099030/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 25 teeth tooth width 25mm SKU: 21099025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-25-teeth-tooth-width-25mm-sku-21099025/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 24 teeth tooth width 25mm SKU: 21099024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-24-teeth-tooth-width-25mm-sku-21099024/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 20 teeth tooth width 25mm SKU: 21099020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-20-teeth-tooth-width-25mm-sku-21099020/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 18 teeth tooth width 25mm SKU: 21099018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-18-teeth-tooth-width-25mm-sku-21099018/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 15 teeth tooth width 25mm SKU: 21099015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-15-teeth-tooth-width-25mm-sku-21099015/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 12 teeth tooth width 25mm SKU: 21099012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-12-teeth-tooth-width-25mm-sku-21099012/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 60 teeth tooth width 25mm SKU: 21006000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-60-teeth-tooth-width-25mm-sku-21006000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 50 teeth tooth width 25mm SKU: 21005000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-50-teeth-tooth-width-25mm-sku-21005000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 45 teeth tooth width 25mm SKU: 21004500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-45-teeth-tooth-width-25mm-sku-21004500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 40 teeth tooth width 25mm SKU: 21004000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-40-teeth-tooth-width-25mm-sku-21004000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 36 teeth tooth width 25mm SKU: 21003600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-36-teeth-tooth-width-25mm-sku-21003600/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 30 teeth tooth width 25mm SKU: 21003000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-30-teeth-tooth-width-25mm-sku-21003000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 25 teeth tooth width 25mm SKU: 21002500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-25-teeth-tooth-width-25mm-sku-21002500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 24 teeth tooth width 25mm SKU: 21002400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-24-teeth-tooth-width-25mm-sku-21002400/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 20 teeth tooth width 25mm SKU: 21002000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-20-teeth-tooth-width-25mm-sku-21002000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 18 teeth tooth width 25mm SKU: 21001800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-18-teeth-tooth-width-25mm-sku-21001800/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 15 teeth tooth width 25mm SKU: 21001500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-15-teeth-tooth-width-25mm-sku-21001500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 12 teeth tooth width 25mm SKU: 21001200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-12-teeth-tooth-width-25mm-sku-21001200/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 60 teeth tooth width 12mm SKU: 20599060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-60-teeth-tooth-width-12mm-sku-20599060/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm SKU: 20599050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-50-teeth-tooth-width-12mm-sku-20599050/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 45 teeth tooth width 12mm SKU: 20599045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-45-teeth-tooth-width-12mm-sku-20599045/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 40 teeth tooth width 12mm SKU: 20599040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-40-teeth-tooth-width-12mm-sku-20599040/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 36 teeth tooth width 12mm SKU: 20599036](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-36-teeth-tooth-width-12mm-sku-20599036/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 30 teeth tooth width 12mm SKU: 20599030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-30-teeth-tooth-width-12mm-sku-20599030/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 25 teeth tooth width 12mm SKU: 20599025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-25-teeth-tooth-width-12mm-sku-20599025/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 24 teeth tooth width 12mm SKU: 20599024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-24-teeth-tooth-width-12mm-sku-20599024/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 20 teeth tooth width 12mm SKU: 20599020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-20-teeth-tooth-width-12mm-sku-20599020/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm SKU: 20599018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-18-teeth-tooth-width-12mm-sku-20599018/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 15 teeth tooth width 12mm SKU: 20599015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-15-teeth-tooth-width-12mm-sku-20599015/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 12 teeth tooth width 12mm SKU: 20599012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-12-teeth-tooth-width-12mm-sku-20599012/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Mounting screw M16 stainless steel for chain tensioning wheel KSP and KSP-R SKU: 14099901](https://maedler.in/product/mounting-screw-m16-stainless-steel-for-chain-tensioning-wheel-ksp-and-ksp-r-sku-14099901/): Material: Stainless steel 1.4301 (AISI 304).Product No. 140 991 01: Screw for chain tensioning wheels KSP-R up to size 12 B-1 (bore 16mm).Product No. 140 999 01: Screw for chain tensioning wheel KSP-R, only for size 16 B-1 (bore 20mm), but not for product no. 140 990 08. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1"x17,02mm 17 teeth with ball bearing SKU: 14099817](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-16-b-1-1x1702mm-17-teeth-with-ball-bearing-sku-14099817/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1"x17,02mm 15 teeth with ball bearing SKU: 14099815](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-16-b-1-1x1702mm-15-teeth-with-ball-bearing-sku-14099815/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Tensioning element stainless steel size 4 1500 N SKU: 14099804](https://maedler.in/product/tensioning-element-stainless-steel-size-4-1500-n-sku-14099804/): Material: Stainless steel 1.4301 or 1.4308. The design of this tensioning element is identical to the standard version. - [Tensioning element stainless steel size 3 810 N SKU: 14099803](https://maedler.in/product/tensioning-element-stainless-steel-size-3-810-n-sku-14099803/): Material: Stainless steel 1.4301 or 1.4308. The design of this tensioning element is identical to the standard version. - [Tensioning element stainless steel size 2 350 N SKU: 14099802](https://maedler.in/product/tensioning-element-stainless-steel-size-2-350-n-sku-14099802/): Material: Stainless steel 1.4301 or 1.4308. The design of this tensioning element is identical to the standard version. - [Tensioning element stainless steel size 1 135 N SKU: 14099801](https://maedler.in/product/tensioning-element-stainless-steel-size-1-135-n-sku-14099801/): Material: Stainless steel 1.4301 or 1.4308. The design of this tensioning element is identical to the standard version. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1"x17,02mm 12 teeth with ball bearing SKU: 14099800](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-16-b-1-1x1702mm-12-teeth-with-ball-bearing-sku-14099800/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 16 teeth with ball bearing SKU: 14099716](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-16-teeth-with-ball-bearing-sku-14099716/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 13 teeth with ball bearing SKU: 14099713](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-13-teeth-with-ball-bearing-sku-14099713/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 12 teeth with ball bearing SKU: 14099712](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-12-teeth-with-ball-bearing-sku-14099712/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 15 teeth with ball bearing SKU: 14099700](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-15-teeth-with-ball-bearing-sku-14099700/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 21 teeth with ball bearing SKU: 14099621](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-21-teeth-with-ball-bearing-sku-14099621/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 18 teeth with ball bearing SKU: 14099618](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-18-teeth-with-ball-bearing-sku-14099618/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 16 teeth with ball bearing SKU: 14099616](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-16-teeth-with-ball-bearing-sku-14099616/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 15 teeth with ball bearing SKU: 14099615](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-15-teeth-with-ball-bearing-sku-14099615/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 14 teeth with ball bearing SKU: 14099614](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-14-teeth-with-ball-bearing-sku-14099614/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 13 teeth with ball bearing SKU: 14099613](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-13-teeth-with-ball-bearing-sku-14099613/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 17 teeth with ball bearing SKU: 14099600](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-17-teeth-with-ball-bearing-sku-14099600/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 21 teeth with ball bearing SKU: 14099521](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-21-teeth-with-ball-bearing-sku-14099521/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 20 teeth with ball bearing SKU: 14099520](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-20-teeth-with-ball-bearing-sku-14099520/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 16 teeth with ball bearing SKU: 14099516](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-16-teeth-with-ball-bearing-sku-14099516/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 15 teeth with ball bearing SKU: 14099515](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-15-teeth-with-ball-bearing-sku-14099515/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 14 teeth with ball bearing SKU: 14099514](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-14-teeth-with-ball-bearing-sku-14099514/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners, double 16 B-2 1" x 17,02mm Z=13 stainless steel SKU: 140995082](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-16-b-2-1-x-1702mm-z13-stainless-steel-sku-140995082/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 16 B-1 1" x 17,02mm Z=13 stainless steel SKU: 14099508](https://maedler.in/product/sprocket-set-for-chain-tensioners-16-b-1-1-x-1702mm-z13-stainless-steel-sku-14099508/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Sprocket set for chain tensioners, double 12 B-2 3/4" x 7/16" Z=15 stainless steel SKU: 140995072](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-12-b-2-3-4-x-7-16-z15-stainless-steel-sku-140995072/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 12 B-1 3/4" x 7/16" Z=15 stainless steel SKU: 14099507](https://maedler.in/product/sprocket-set-for-chain-tensioners-12-b-1-3-4-x-7-16-z15-stainless-steel-sku-14099507/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Sprocket set for chain tensioners, double 10 B-2 5/8" x 3/8" Z=15 stainless steel SKU: 140995062](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-10-b-2-5-8-x-3-8-z15-stainless-steel-sku-140995062/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 10 B-1 5/8" x 3/8" Z=15 stainless steel SKU: 14099506](https://maedler.in/product/sprocket-set-for-chain-tensioners-10-b-1-5-8-x-3-8-z15-stainless-steel-sku-14099506/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Sprocket set for chain tensioners, double 08 B-2 1/2" x 5/16" Z=15 stainless steel SKU: 140995052](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-08-b-2-1-2-x-5-16-z15-stainless-steel-sku-140995052/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 08 B-1 1/2" x 5/16" Z=15 stainless steel SKU: 14099505](https://maedler.in/product/sprocket-set-for-chain-tensioners-08-b-1-1-2-x-5-16-z15-stainless-steel-sku-14099505/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Sprocket set for chain tensioners, double 06 B-2 3/8" x 7/32" Z=15 stainless steel SKU: 140995012](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-06-b-2-3-8-x-7-32-z15-stainless-steel-sku-140995012/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 06 B-1 3/8" x 7/32" Z=15 stainless steel SKU: 14099501](https://maedler.in/product/sprocket-set-for-chain-tensioners-06-b-1-3-8-x-7-32-z15-stainless-steel-sku-14099501/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 18 teeth with ball bearing SKU: 14099500](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-18-teeth-with-ball-bearing-sku-14099500/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 083 1/2x3/16" 16 teeth with ball bearing SKU: 14099316](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-083-1-2x3-16-16-teeth-with-ball-bearing-sku-14099316/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 083 1/2x3/16" 18 teeth with ball bearing SKU: 14099300](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-083-1-2x3-16-18-teeth-with-ball-bearing-sku-14099300/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 20 teeth with ball bearing SKU: 14099120](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-06-b-1-3-8x7-32-20-teeth-with-ball-bearing-sku-14099120/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Mounting screw M12 stainless steel for chain tensioning wheel KSP and KSP-R SKU: 14099101](https://maedler.in/product/mounting-screw-m12-stainless-steel-for-chain-tensioning-wheel-ksp-and-ksp-r-sku-14099101/): Material: Stainless steel 1.4301 (AISI 304).Product No. 140 991 01: Screw for chain tensioning wheels KSP-R up to size 12 B-1 (bore 16mm).Product No. 140 999 01: Screw for chain tensioning wheel KSP-R, only for size 16 B-1 (bore 20mm), but not for product no. 140 990 08. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 21 teeth with ball bearing SKU: 14099100](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-06-b-1-3-8x7-32-21-teeth-with-ball-bearing-sku-14099100/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1"x17.02mm 13 teeth with ball bearing SKU: 14099008](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-16-b-1-1x17-02mm-13-teeth-with-ball-bearing-sku-14099008/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 15 teeth with ball bearing SKU: 14099007](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-15-teeth-with-ball-bearing-sku-14099007/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 15 teeth with ball bearing SKU: 14099006](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-15-teeth-with-ball-bearing-sku-14099006/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 15 teeth with ball bearing SKU: 14099005](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-15-teeth-with-ball-bearing-sku-14099005/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 15 teeth with ball bearing SKU: 14099001](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-06-b-1-3-8x7-32-15-teeth-with-ball-bearing-sku-14099001/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 05 B-1 pitch 8mm 23 teeth with ball bearing SKU: 14099000](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-05-b-1-pitch-8mm-23-teeth-with-ball-bearing-sku-14099000/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain rider set 12 B-2 3/4x7/16" SKU: 14086007](https://maedler.in/product/chain-rider-set-12-b-2-3-4x7-16-sku-14086007/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 10 B-2 5/8x3/8" SKU: 14086006](https://maedler.in/product/chain-rider-set-10-b-2-5-8x3-8-sku-14086006/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 08 B-2 1/2x5/16" SKU: 14086005](https://maedler.in/product/chain-rider-set-08-b-2-1-2x5-16-sku-14086005/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 06 B-2 3/8x7/32" SKU: 14086001](https://maedler.in/product/chain-rider-set-06-b-2-3-8x7-32-sku-14086001/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 12 B-1 3/4x7/16" SKU: 14085700](https://maedler.in/product/chain-rider-set-12-b-1-3-4x7-16-sku-14085700/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 10 B-1 5/8x3/8" SKU: 14085600](https://maedler.in/product/chain-rider-set-10-b-1-5-8x3-8-sku-14085600/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 08 B-1 1/2x5/16" SKU: 14085500](https://maedler.in/product/chain-rider-set-08-b-1-1-2x5-16-sku-14085500/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 06 B-1 3/8x7/32" SKU: 14085100](https://maedler.in/product/chain-rider-set-06-b-1-3-8x7-32-sku-14085100/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Spur gear made of stainless steel 1.4305 with hub module 1 11 teeth tooth width 10mm outside diameter 13mm SKU: 21499011](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-11-teeth-tooth-width-10mm-outside-diameter-13mm-sku-21499011/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 10 teeth tooth width 10mm outside diameter 12mm SKU: 21499010](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-10-teeth-tooth-width-10mm-outside-diameter-12mm-sku-21499010/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 60 teeth tooth width 15mm outside diameter 62mm teeth induction hardened SKU: 21488160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-60-teeth-tooth-width-15mm-outside-diameter-62mm-teeth-induction-hardened-sku-21488160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 50 teeth tooth width 15mm outside diameter 52mm teeth induction hardened SKU: 21488150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-50-teeth-tooth-width-15mm-outside-diameter-52mm-teeth-induction-hardened-sku-21488150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 40 teeth tooth width 15mm outside diameter 42mm teeth induction hardened SKU: 21488140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-40-teeth-tooth-width-15mm-outside-diameter-42mm-teeth-induction-hardened-sku-21488140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 36 teeth tooth width 15mm outside diameter 38mm teeth induction hardened SKU: 21488136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-36-teeth-tooth-width-15mm-outside-diameter-38mm-teeth-induction-hardened-sku-21488136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 32 teeth tooth width 15mm outside diameter 34mm teeth induction hardened SKU: 21488132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-32-teeth-tooth-width-15mm-outside-diameter-34mm-teeth-induction-hardened-sku-21488132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 30 teeth tooth width 15mm outside diameter 32mm teeth induction hardened SKU: 21488130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-30-teeth-tooth-width-15mm-outside-diameter-32mm-teeth-induction-hardened-sku-21488130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 28 teeth tooth width 15mm outside diameter 30mm teeth induction hardened SKU: 21488128](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-28-teeth-tooth-width-15mm-outside-diameter-30mm-teeth-induction-hardened-sku-21488128/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 26 teeth tooth width 15mm outside diameter 28mm teeth induction hardened SKU: 21488126](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-26-teeth-tooth-width-15mm-outside-diameter-28mm-teeth-induction-hardened-sku-21488126/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 25 teeth tooth width 15mm outside diameter 27mm teeth induction hardened SKU: 21488125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-teeth-tooth-width-15mm-outside-diameter-27mm-teeth-induction-hardened-sku-21488125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 24 teeth tooth width 15mm outside diameter 26mm teeth induction hardened SKU: 21488124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-24-teeth-tooth-width-15mm-outside-diameter-26mm-teeth-induction-hardened-sku-21488124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 20 teeth tooth width 15mm outside diameter 22mm teeth induction hardened SKU: 21488120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-20-teeth-tooth-width-15mm-outside-diameter-22mm-teeth-induction-hardened-sku-21488120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 18 teeth tooth width 15mm outside diameter 20mm teeth induction hardened SKU: 21488118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-18-teeth-tooth-width-15mm-outside-diameter-20mm-teeth-induction-hardened-sku-21488118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 17 teeth tooth width 15mm outside diameter 19mm teeth induction hardened SKU: 21488117](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-17-teeth-tooth-width-15mm-outside-diameter-19mm-teeth-induction-hardened-sku-21488117/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 16 teeth tooth width 15mm outside diameter 18mm teeth induction hardened SKU: 21488116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-16-teeth-tooth-width-15mm-outside-diameter-18mm-teeth-induction-hardened-sku-21488116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 15 teeth tooth width 15mm outside diameter 17mm teeth induction hardened SKU: 21488115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-15-teeth-tooth-width-15mm-outside-diameter-17mm-teeth-induction-hardened-sku-21488115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 14 teeth tooth width 15mm outside diameter 16mm teeth induction hardened SKU: 21488114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-14-teeth-tooth-width-15mm-outside-diameter-16mm-teeth-induction-hardened-sku-21488114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 13 teeth tooth width 15mm outside diameter 15mm teeth induction hardened SKU: 21488113](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-13-teeth-tooth-width-15mm-outside-diameter-15mm-teeth-induction-hardened-sku-21488113/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 12 teeth tooth width 15mm outside diameter 14mm teeth induction hardened SKU: 21488112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-12-teeth-tooth-width-15mm-outside-diameter-14mm-teeth-induction-hardened-sku-21488112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 0.7 120 teeth tooth width 5mm outside diameter 85.4mm SKU: 21212000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-0-7-120-teeth-tooth-width-5mm-outside-diameter-85-4mm-sku-21212000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 0.7 114 teeth tooth width 5mm outside diameter 81.2mm SKU: 21211400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-0-7-114-teeth-tooth-width-5mm-outside-diameter-81-2mm-sku-21211400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 100 teeth tooth width 5mm outside diameter 71.4mm SKU: 21210000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-100-teeth-tooth-width-5mm-outside-diameter-71-4mm-sku-21210000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 96 teeth tooth width 5mm outside diameter 68.6mm SKU: 21209600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-96-teeth-tooth-width-5mm-outside-diameter-68-6mm-sku-21209600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 90 teeth tooth width 5mm outside diameter 64.4mm SKU: 21209000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-90-teeth-tooth-width-5mm-outside-diameter-64-4mm-sku-21209000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 85 teeth tooth width 5mm outside diameter 60.9mm SKU: 21208500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-85-teeth-tooth-width-5mm-outside-diameter-60-9mm-sku-21208500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 80 teeth tooth width 5mm outside diameter 57.4mm SKU: 21208000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-80-teeth-tooth-width-5mm-outside-diameter-57-4mm-sku-21208000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 75 teeth tooth width 5mm outside diameter 53.9mm SKU: 21207500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-75-teeth-tooth-width-5mm-outside-diameter-53-9mm-sku-21207500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 72 teeth tooth width 5mm outside diameter 51.8mm SKU: 21207200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-72-teeth-tooth-width-5mm-outside-diameter-51-8mm-sku-21207200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 70 teeth tooth width 5mm outside diameter 50.4mm SKU: 21207000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-70-teeth-tooth-width-5mm-outside-diameter-50-4mm-sku-21207000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 65 teeth tooth width 5mm outside diameter 46.9mm SKU: 21206500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-65-teeth-tooth-width-5mm-outside-diameter-46-9mm-sku-21206500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 64 teeth tooth width 5mm outside diameter 46.2mm SKU: 21206400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-64-teeth-tooth-width-5mm-outside-diameter-46-2mm-sku-21206400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 60 teeth tooth width 5mm outside diameter 43.4mm SKU: 21206000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-60-teeth-tooth-width-5mm-outside-diameter-43-4mm-sku-21206000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 56 teeth tooth width 5mm outside diameter 40.6mm SKU: 21205600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-56-teeth-tooth-width-5mm-outside-diameter-40-6mm-sku-21205600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 55 teeth tooth width 5mm outside diameter 39.9mm SKU: 21205500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-55-teeth-tooth-width-5mm-outside-diameter-39-9mm-sku-21205500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 54 teeth tooth width 5mm outside diameter 39.2mm SKU: 21205400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-54-teeth-tooth-width-5mm-outside-diameter-39-2mm-sku-21205400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 52 teeth tooth width 5mm outside diameter 37.8mm SKU: 21205200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-52-teeth-tooth-width-5mm-outside-diameter-37-8mm-sku-21205200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 50 teeth tooth width 5mm outside diameter 36.4mm SKU: 21205000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-50-teeth-tooth-width-5mm-outside-diameter-36-4mm-sku-21205000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 48 teeth tooth width 5mm outside diameter 35mm SKU: 21204800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-48-teeth-tooth-width-5mm-outside-diameter-35mm-sku-21204800/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 45 teeth tooth width 5mm outside diameter 32.9mm SKU: 21204500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-45-teeth-tooth-width-5mm-outside-diameter-32-9mm-sku-21204500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 42 teeth tooth width 5mm outside diameter 30.8mm SKU: 21204200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-42-teeth-tooth-width-5mm-outside-diameter-30-8mm-sku-21204200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 40 teeth tooth width 5mm outside diameter 29.4mm SKU: 21204000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-40-teeth-tooth-width-5mm-outside-diameter-29-4mm-sku-21204000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 38 teeth tooth width 5mm outside diameter 28mm SKU: 21203800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-38-teeth-tooth-width-5mm-outside-diameter-28mm-sku-21203800/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 36 teeth tooth width 5mm outside diameter 26.6mm SKU: 21203600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-36-teeth-tooth-width-5mm-outside-diameter-26-6mm-sku-21203600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 35 teeth tooth width 5mm outside diameter 25.9mm SKU: 21203500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-35-teeth-tooth-width-5mm-outside-diameter-25-9mm-sku-21203500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 32 teeth tooth width 5mm outside diameter 23.8mm SKU: 21203200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-32-teeth-tooth-width-5mm-outside-diameter-23-8mm-sku-21203200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 30 teeth tooth width 5mm outside diameter 22.4mm SKU: 21203000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-30-teeth-tooth-width-5mm-outside-diameter-22-4mm-sku-21203000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 28 teeth tooth width 5mm outside diameter 21mm SKU: 21202800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-28-teeth-tooth-width-5mm-outside-diameter-21mm-sku-21202800/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 27 teeth tooth width 5mm outside diameter 20.3mm SKU: 21202700](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-27-teeth-tooth-width-5mm-outside-diameter-20-3mm-sku-21202700/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 26 teeth tooth width 5mm outside diameter 19.6mm SKU: 21202600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-26-teeth-tooth-width-5mm-outside-diameter-19-6mm-sku-21202600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 25 teeth tooth width 5mm outside diameter 18.9mm SKU: 21202500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-25-teeth-tooth-width-5mm-outside-diameter-18-9mm-sku-21202500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 24 teeth tooth width 5mm outside diameter 18.2mm SKU: 21202400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-24-teeth-tooth-width-5mm-outside-diameter-18-2mm-sku-21202400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 23 teeth tooth width 5mm outside diameter 17.5mm SKU: 21202300](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-23-teeth-tooth-width-5mm-outside-diameter-17-5mm-sku-21202300/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 22 teeth tooth width 5mm outside diameter 16.8mm SKU: 21202200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-22-teeth-tooth-width-5mm-outside-diameter-16-8mm-sku-21202200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 21 teeth tooth width 5mm outside diameter 16.1mm SKU: 21202100](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-21-teeth-tooth-width-5mm-outside-diameter-16-1mm-sku-21202100/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 20 teeth tooth width 5mm outside diameter 15.4mm SKU: 21202000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-20-teeth-tooth-width-5mm-outside-diameter-15-4mm-sku-21202000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 19 teeth tooth width 5mm outside diameter 14.7mm SKU: 21201900](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-19-teeth-tooth-width-5mm-outside-diameter-14-7mm-sku-21201900/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 18 teeth tooth width 5mm outside diameter 14mm SKU: 21201800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-18-teeth-tooth-width-5mm-outside-diameter-14mm-sku-21201800/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 17 teeth tooth width 5mm outside diameter 13.3mm SKU: 21201700](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-17-teeth-tooth-width-5mm-outside-diameter-13-3mm-sku-21201700/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 16 teeth tooth width 5mm outside diameter 12.6mm SKU: 21201600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-16-teeth-tooth-width-5mm-outside-diameter-12-6mm-sku-21201600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 15 teeth tooth width 5mm outside diameter 11.9mm SKU: 21201500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-15-teeth-tooth-width-5mm-outside-diameter-11-9mm-sku-21201500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 14 teeth tooth width 5mm outside diameter 11.2mm SKU: 21201400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-14-teeth-tooth-width-5mm-outside-diameter-11-2mm-sku-21201400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 13 teeth tooth width 5mm outside diameter 10.5mm SKU: 21201300](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-13-teeth-tooth-width-5mm-outside-diameter-10-5mm-sku-21201300/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 12 teeth tooth width 5mm outside diameter 9.8mm SKU: 21201200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-12-teeth-tooth-width-5mm-outside-diameter-9-8mm-sku-21201200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 10 teeth tooth width 5mm outside diameter 8.4mm SKU: 21201000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-10-teeth-tooth-width-5mm-outside-diameter-8-4mm-sku-21201000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 120 teeth tooth width 4mm outside diameter 61mm SKU: 21112000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-120-teeth-tooth-width-4mm-outside-diameter-61mm-sku-21112000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 114 teeth tooth width 4mm outside diameter 58mm SKU: 21111400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-114-teeth-tooth-width-4mm-outside-diameter-58mm-sku-21111400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 100 teeth tooth width 4mm outside diameter 51mm SKU: 21110000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-100-teeth-tooth-width-4mm-outside-diameter-51mm-sku-21110000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 96 teeth tooth width 4mm outside diameter 49mm SKU: 21109600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-96-teeth-tooth-width-4mm-outside-diameter-49mm-sku-21109600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 90 teeth tooth width 4mm outside diameter 46mm SKU: 21109000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-90-teeth-tooth-width-4mm-outside-diameter-46mm-sku-21109000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 85 teeth tooth width 4mm outside diameter 43,5mm SKU: 21108500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-85-teeth-tooth-width-4mm-outside-diameter-435mm-sku-21108500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 80 teeth tooth width 4mm outside diameter 41mm SKU: 21108000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-80-teeth-tooth-width-4mm-outside-diameter-41mm-sku-21108000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 75 teeth tooth width 4mm outside diameter 38.5mm SKU: 21107500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-75-teeth-tooth-width-4mm-outside-diameter-38-5mm-sku-21107500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 72 teeth tooth width 4mm outside diameter 37mm SKU: 21107200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-72-teeth-tooth-width-4mm-outside-diameter-37mm-sku-21107200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 70 teeth tooth width 4mm outside diameter 36mm SKU: 21107000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-70-teeth-tooth-width-4mm-outside-diameter-36mm-sku-21107000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 65 teeth tooth width 4mm outside diameter 33.5mm SKU: 21106500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-65-teeth-tooth-width-4mm-outside-diameter-33-5mm-sku-21106500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 64 teeth tooth width 4mm outside diameter 33mm SKU: 21106400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-64-teeth-tooth-width-4mm-outside-diameter-33mm-sku-21106400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 60 teeth tooth width 4mm outside diameter 31mm SKU: 21106000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-60-teeth-tooth-width-4mm-outside-diameter-31mm-sku-21106000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 56 teeth tooth width 4mm outside diameter 29mm SKU: 21105600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-56-teeth-tooth-width-4mm-outside-diameter-29mm-sku-21105600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 55 teeth tooth width 4mm outside diameter 28.5mm SKU: 21105500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-55-teeth-tooth-width-4mm-outside-diameter-28-5mm-sku-21105500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 54 teeth tooth width 4mm outside diameter 28mm SKU: 21105400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-54-teeth-tooth-width-4mm-outside-diameter-28mm-sku-21105400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 52 teeth tooth width 4mm outside diameter 27mm SKU: 21105200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-52-teeth-tooth-width-4mm-outside-diameter-27mm-sku-21105200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 50 teeth tooth width 4mm outside diameter 26mm SKU: 21105000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-50-teeth-tooth-width-4mm-outside-diameter-26mm-sku-21105000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 48 teeth tooth width 4mm outside diameter 25mm SKU: 21104800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-48-teeth-tooth-width-4mm-outside-diameter-25mm-sku-21104800/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 45 teeth tooth width 4mm outside diameter 23.5mm SKU: 21104500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-45-teeth-tooth-width-4mm-outside-diameter-23-5mm-sku-21104500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 42 teeth tooth width 4mm outside diameter 22mm SKU: 21104200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-42-teeth-tooth-width-4mm-outside-diameter-22mm-sku-21104200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 40 teeth tooth width 4mm outside diameter 21mm SKU: 21104000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-40-teeth-tooth-width-4mm-outside-diameter-21mm-sku-21104000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 38 teeth tooth width 4mm outside diameter 20mm SKU: 21103800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-38-teeth-tooth-width-4mm-outside-diameter-20mm-sku-21103800/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 36 teeth tooth width 4mm outside diameter 19mm SKU: 21103600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-36-teeth-tooth-width-4mm-outside-diameter-19mm-sku-21103600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 35 teeth tooth width 4mm outside diameter 18.5mm SKU: 21103500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-35-teeth-tooth-width-4mm-outside-diameter-18-5mm-sku-21103500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 32 teeth tooth width 4mm outside diameter 17mm SKU: 21103200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-32-teeth-tooth-width-4mm-outside-diameter-17mm-sku-21103200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 30 teeth tooth width 4mm outside diameter 16mm SKU: 21103000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-30-teeth-tooth-width-4mm-outside-diameter-16mm-sku-21103000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 28 teeth tooth width 4mm outside diameter 15mm SKU: 21102800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-28-teeth-tooth-width-4mm-outside-diameter-15mm-sku-21102800/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 27 teeth tooth width 4mm outside diameter 14.5mm SKU: 21102700](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-27-teeth-tooth-width-4mm-outside-diameter-14-5mm-sku-21102700/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 26 teeth tooth width 4mm outside diameter 14mm SKU: 21102600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-26-teeth-tooth-width-4mm-outside-diameter-14mm-sku-21102600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 25 teeth tooth width 4mm outside diameter 13.5mm SKU: 21102500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-25-teeth-tooth-width-4mm-outside-diameter-13-5mm-sku-21102500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 24 teeth tooth width 4mm outside diameter 13mm SKU: 21102400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-24-teeth-tooth-width-4mm-outside-diameter-13mm-sku-21102400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 23 teeth tooth width 4mm outside diameter 12.5mm SKU: 21102300](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-23-teeth-tooth-width-4mm-outside-diameter-12-5mm-sku-21102300/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 22 teeth tooth width 4mm outside diameter 126mm SKU: 21102200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-22-teeth-tooth-width-4mm-outside-diameter-126mm-sku-21102200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 21 teeth tooth width 4mm outside diameter 11.5mm SKU: 21102100](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-21-teeth-tooth-width-4mm-outside-diameter-11-5mm-sku-21102100/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 40 teeth tooth width 17mm outside diameter 63mm teeth induction hardened SKU: 21888140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-teeth-induction-hardened-sku-21888140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 36 teeth tooth width 17mm outside diameter 57mm teeth induction hardened SKU: 21888136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-teeth-induction-hardened-sku-21888136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 30 teeth tooth width 17mm outside diameter 48mm teeth induction hardened SKU: 21888130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-teeth-induction-hardened-sku-21888130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm teeth induction hardened SKU: 21888125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-teeth-induction-hardened-sku-21888125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 24 teeth tooth width 17mm outside diameter 39mm teeth induction hardened SKU: 21888124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-24-teeth-tooth-width-17mm-outside-diameter-39mm-teeth-induction-hardened-sku-21888124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 22 teeth tooth width 17mm outside diameter 36mm teeth induction hardened SKU: 21888122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-22-teeth-tooth-width-17mm-outside-diameter-36mm-teeth-induction-hardened-sku-21888122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 20 teeth tooth width 17mm outside diameter 33mm teeth induction hardened SKU: 21888120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-20-teeth-tooth-width-17mm-outside-diameter-33mm-teeth-induction-hardened-sku-21888120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 18 teeth tooth width 17mm outside diameter 30mm teeth induction hardened SKU: 21888118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-18-teeth-tooth-width-17mm-outside-diameter-30mm-teeth-induction-hardened-sku-21888118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 16 teeth tooth width 17mm outside diameter 27mm teeth induction hardened SKU: 21888116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-16-teeth-tooth-width-17mm-outside-diameter-27mm-teeth-induction-hardened-sku-21888116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 15 teeth tooth width 17mm outside diameter 25.5mm teeth induction hardened SKU: 21888115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-15-teeth-tooth-width-17mm-outside-diameter-25-5mm-teeth-induction-hardened-sku-21888115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 14 teeth tooth width 17mm outside diameter 24mm teeth induction hardened SKU: 21888114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-14-teeth-tooth-width-17mm-outside-diameter-24mm-teeth-induction-hardened-sku-21888114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 12 teeth tooth width 17mm outside diameter 21mm teeth induction hardened SKU: 21888112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-12-teeth-tooth-width-17mm-outside-diameter-21mm-teeth-induction-hardened-sku-21888112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21855280](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21855280/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21855260](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21855260/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 56 teeth tooth width 17mm outside diameter 87mm SKU: 21855256](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-56-teeth-tooth-width-17mm-outside-diameter-87mm-sku-21855256/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21855250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21855250/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21855245](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21855245/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21855240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21855240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21855236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21855236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21855232](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21855232/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21855230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21855230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21855225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21855225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 21855120](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-21855120/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 100 teeth tooth width 17mm outside diameter 153mm SKU: 21855100](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-100-teeth-tooth-width-17mm-outside-diameter-153mm-sku-21855100/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 90 teeth tooth width 17mm outside diameter 138mm SKU: 21855090](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-90-teeth-tooth-width-17mm-outside-diameter-138mm-sku-21855090/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21855080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21855080/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 72 teeth tooth width 17mm outside diameter 111mm SKU: 21855072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-72-teeth-tooth-width-17mm-outside-diameter-111mm-sku-21855072/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 70 teeth tooth width 17mm outside diameter 108mm SKU: 21855070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-70-teeth-tooth-width-17mm-outside-diameter-108mm-sku-21855070/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 64 teeth tooth width 17mm outside diameter 99mm SKU: 21855064](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-64-teeth-tooth-width-17mm-outside-diameter-99mm-sku-21855064/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21855060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21855060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 56 teeth tooth width 17mm outside diameter 87mm SKU: 21855056](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-56-teeth-tooth-width-17mm-outside-diameter-87mm-sku-21855056/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21855050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21855050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 21855048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-21855048/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21855045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21855045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21855040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21855040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21855036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21855036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21855032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21855032/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21855030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21855030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21855025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21855025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear stainless steel 1.4305 with hub module 1 120 teeth tooth width 15mm outside diameter 122mm SKU: 21499320](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-120-teeth-tooth-width-15mm-outside-diameter-122mm-sku-21499320/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 110 teeth tooth width 15mm outside diameter 112mm SKU: 21499310](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-110-teeth-tooth-width-15mm-outside-diameter-112mm-sku-21499310/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 100 teeth tooth width 15mm outside diameter 102mm SKU: 21499300](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-100-teeth-tooth-width-15mm-outside-diameter-102mm-sku-21499300/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 90 teeth tooth width 15mm outside diameter 92mm SKU: 21499290](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-90-teeth-tooth-width-15mm-outside-diameter-92mm-sku-21499290/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 80 teeth tooth width 15mm outside diameter 82mm SKU: 21499280](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-80-teeth-tooth-width-15mm-outside-diameter-82mm-sku-21499280/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 75 teeth tooth width 15mm outside diameter 77mm SKU: 21499275](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-75-teeth-tooth-width-15mm-outside-diameter-77mm-sku-21499275/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 72 teeth tooth width 15mm outside diameter 74mm SKU: 21499272](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-72-teeth-tooth-width-15mm-outside-diameter-74mm-sku-21499272/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 70 teeth tooth width 15mm outside diameter 72mm SKU: 21499270](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-70-teeth-tooth-width-15mm-outside-diameter-72mm-sku-21499270/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 65 teeth tooth width 15mm outside diameter 67mm SKU: 21499265](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-65-teeth-tooth-width-15mm-outside-diameter-67mm-sku-21499265/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 60 teeth tooth width 15mm outside diameter 62mm SKU: 21499260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-60-teeth-tooth-width-15mm-outside-diameter-62mm-sku-21499260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 50 teeth tooth width 15mm outside diameter 52mm SKU: 21499250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-50-teeth-tooth-width-15mm-outside-diameter-52mm-sku-21499250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 48 teeth tooth width 15mm outside diameter 50mm SKU: 21499248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-48-teeth-tooth-width-15mm-outside-diameter-50mm-sku-21499248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 45 teeth tooth width 15mm outside diameter 47mm SKU: 21499245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-45-teeth-tooth-width-15mm-outside-diameter-47mm-sku-21499245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 40 teeth tooth width 15mm outside diameter 42mm SKU: 21499240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-40-teeth-tooth-width-15mm-outside-diameter-42mm-sku-21499240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 36 teeth tooth width 15mm outside diameter 38mm SKU: 21499236](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-36-teeth-tooth-width-15mm-outside-diameter-38mm-sku-21499236/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 35 teeth tooth width 15mm outside diameter 37mm SKU: 21499235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-35-teeth-tooth-width-15mm-outside-diameter-37mm-sku-21499235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 30 teeth tooth width 15mm outside diameter 32mm SKU: 21499230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-30-teeth-tooth-width-15mm-outside-diameter-32mm-sku-21499230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 28 teeth tooth width 15mm outside diameter 30mm SKU: 21499228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-28-teeth-tooth-width-15mm-outside-diameter-30mm-sku-21499228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 26 teeth tooth width 15mm outside diameter 28mm SKU: 21499226](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-26-teeth-tooth-width-15mm-outside-diameter-28mm-sku-21499226/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 25 teeth tooth width 15mm outside diameter 27mm SKU: 21499225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-25-teeth-tooth-width-15mm-outside-diameter-27mm-sku-21499225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 24 teeth tooth width 15mm outside diameter 26mm SKU: 21499224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-24-teeth-tooth-width-15mm-outside-diameter-26mm-sku-21499224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 20 teeth tooth width 15mm outside diameter 22mm SKU: 21499220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-20-teeth-tooth-width-15mm-outside-diameter-22mm-sku-21499220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 19 teeth tooth width 15mm outside diameter 21mm SKU: 21499219](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-19-teeth-tooth-width-15mm-outside-diameter-21mm-sku-21499219/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 18 teeth tooth width 15mm outside diameter 20mm SKU: 21499218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-18-teeth-tooth-width-15mm-outside-diameter-20mm-sku-21499218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 17 teeth tooth width 15mm outside diameter 19mm SKU: 21499217](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-17-teeth-tooth-width-15mm-outside-diameter-19mm-sku-21499217/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 16 teeth tooth width 15mm outside diameter 18mm SKU: 21499216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-16-teeth-tooth-width-15mm-outside-diameter-18mm-sku-21499216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 15 teeth tooth width 15mm outside diameter 17mm SKU: 21499215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-15-teeth-tooth-width-15mm-outside-diameter-17mm-sku-21499215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 14 teeth tooth width 15mm outside diameter 16mm SKU: 21499214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-14-teeth-tooth-width-15mm-outside-diameter-16mm-sku-21499214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 13 teeth tooth width 15mm outside diameter 15mm SKU: 21499213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-13-teeth-tooth-width-15mm-outside-diameter-15mm-sku-21499213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 12 teeth tooth width 15mm outside diameter 14mm SKU: 21499212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-12-teeth-tooth-width-15mm-outside-diameter-14mm-sku-21499212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 10 teeth tooth width 15mm outside diameter 12mm SKU: 21499210](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-10-teeth-tooth-width-15mm-outside-diameter-12mm-sku-21499210/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 120 teeth tooth width 10mm outside diameter 122mm SKU: 21499120](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-120-teeth-tooth-width-10mm-outside-diameter-122mm-sku-21499120/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 100 teeth tooth width 10mm outside diameter 102mm SKU: 21499100](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-100-teeth-tooth-width-10mm-outside-diameter-102mm-sku-21499100/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 80 teeth tooth width 10mm outside diameter 82mm SKU: 21499080](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-80-teeth-tooth-width-10mm-outside-diameter-82mm-sku-21499080/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 75 teeth tooth width 10mm outside diameter 77mm SKU: 21499075](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-75-teeth-tooth-width-10mm-outside-diameter-77mm-sku-21499075/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 72 teeth tooth width 10mm outside diameter 74mm SKU: 21499072](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-72-teeth-tooth-width-10mm-outside-diameter-74mm-sku-21499072/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 70 teeth tooth width 10mm outside diameter 72mm SKU: 21499070](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-70-teeth-tooth-width-10mm-outside-diameter-72mm-sku-21499070/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 65 teeth tooth width 10mm outside diameter 67mm SKU: 21499065](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-65-teeth-tooth-width-10mm-outside-diameter-67mm-sku-21499065/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 64 teeth tooth width 10mm outside diameter 66mm SKU: 21499064](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-64-teeth-tooth-width-10mm-outside-diameter-66mm-sku-21499064/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 60 teeth tooth width 10mm outside diameter 62mm SKU: 21499060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-60-teeth-tooth-width-10mm-outside-diameter-62mm-sku-21499060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 54 teeth tooth width 10mm outside diameter 56mm SKU: 21499054](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-54-teeth-tooth-width-10mm-outside-diameter-56mm-sku-21499054/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 50 teeth tooth width 10mm outside diameter 52mm SKU: 21499050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-50-teeth-tooth-width-10mm-outside-diameter-52mm-sku-21499050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 48 teeth tooth width 10mm outside diameter 50mm SKU: 21499048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-48-teeth-tooth-width-10mm-outside-diameter-50mm-sku-21499048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 45 teeth tooth width 10mm outside diameter 47mm SKU: 21499045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-45-teeth-tooth-width-10mm-outside-diameter-47mm-sku-21499045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 40 teeth tooth width 10mm outside diameter 42mm SKU: 21499040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-40-teeth-tooth-width-10mm-outside-diameter-42mm-sku-21499040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 36 teeth tooth width 10mm outside diameter 38mm SKU: 21499036](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-36-teeth-tooth-width-10mm-outside-diameter-38mm-sku-21499036/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 30 teeth tooth width 10mm outside diameter 32mm SKU: 21499030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-30-teeth-tooth-width-10mm-outside-diameter-32mm-sku-21499030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 28 teeth tooth width 10mm outside diameter 30mm SKU: 21499028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-28-teeth-tooth-width-10mm-outside-diameter-30mm-sku-21499028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 26 teeth tooth width 10mm outside diameter 28mm SKU: 21499026](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-26-teeth-tooth-width-10mm-outside-diameter-28mm-sku-21499026/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 25 teeth tooth width 10mm outside diameter 27mm SKU: 21499025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-25-teeth-tooth-width-10mm-outside-diameter-27mm-sku-21499025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 24 teeth tooth width 10mm outside diameter 26mm SKU: 21499024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-24-teeth-tooth-width-10mm-outside-diameter-26mm-sku-21499024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 22 teeth tooth width 10mm outside diameter 24mm SKU: 21499022](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-22-teeth-tooth-width-10mm-outside-diameter-24mm-sku-21499022/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 20 teeth tooth width 10mm outside diameter 22mm SKU: 21499020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-20-teeth-tooth-width-10mm-outside-diameter-22mm-sku-21499020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 19 teeth tooth width 10mm outside diameter 21mm SKU: 21499019](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-19-teeth-tooth-width-10mm-outside-diameter-21mm-sku-21499019/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 18 teeth tooth width 10mm outside diameter 20mm SKU: 21499018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-18-teeth-tooth-width-10mm-outside-diameter-20mm-sku-21499018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 17 teeth tooth width 10mm outside diameter 19mm SKU: 21499017](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-17-teeth-tooth-width-10mm-outside-diameter-19mm-sku-21499017/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 16 teeth tooth width 10mm outside diameter 18mm SKU: 21499016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-16-teeth-tooth-width-10mm-outside-diameter-18mm-sku-21499016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 15 teeth tooth width 10mm outside diameter 17mm SKU: 21499015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-15-teeth-tooth-width-10mm-outside-diameter-17mm-sku-21499015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 14 teeth tooth width 10mm outside diameter 16mm SKU: 21499014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-14-teeth-tooth-width-10mm-outside-diameter-16mm-sku-21499014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 13 teeth tooth width 10mm outside diameter 15mm SKU: 21499013](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-13-teeth-tooth-width-10mm-outside-diameter-15mm-sku-21499013/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 12 teeth tooth width 10mm outside diameter 14mm SKU: 21499012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-12-teeth-tooth-width-10mm-outside-diameter-14mm-sku-21499012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Precision spur gear made of steel 16MnCr5 module 1.5 25 teeth bore 12mm hardened and ground outside diameter 40.5mm SKU: 22882500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-25-teeth-bore-12mm-hardened-and-ground-outside-diameter-40-5mm-sku-22882500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 24 teeth bore 15mm hardened and ground outside diameter 39mm SKU: 22882415](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-24-teeth-bore-15mm-hardened-and-ground-outside-diameter-39mm-sku-22882415/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 24 teeth bore 10mm hardened and ground outside diameter 39mm SKU: 22882400](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-24-teeth-bore-10mm-hardened-and-ground-outside-diameter-39mm-sku-22882400/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 20 teeth bore 15mm hardened and ground outside diameter 33mm SKU: 22882015](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-20-teeth-bore-15mm-hardened-and-ground-outside-diameter-33mm-sku-22882015/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 20 teeth bore 10mm hardened and ground outside diameter 33mm SKU: 22882000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-20-teeth-bore-10mm-hardened-and-ground-outside-diameter-33mm-sku-22882000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 18 teeth bore 12mm hardened and ground outside diameter 30mm SKU: 22881812](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-18-teeth-bore-12mm-hardened-and-ground-outside-diameter-30mm-sku-22881812/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 18 teeth bore 10mm hardened and ground outside diameter 30mm SKU: 22881800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-18-teeth-bore-10mm-hardened-and-ground-outside-diameter-30mm-sku-22881800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 15 teeth bore 12mm hardened and ground outside diameter 25.5mm SKU: 22881512](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-15-teeth-bore-12mm-hardened-and-ground-outside-diameter-25-5mm-sku-22881512/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 15 teeth bore 10mm hardened and ground outside diameter 25.5mm SKU: 22881500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-15-teeth-bore-10mm-hardened-and-ground-outside-diameter-25-5mm-sku-22881500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 12 teeth bore 8mm hardened and ground outside diameter 21mm SKU: 22881200](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-12-teeth-bore-8mm-hardened-and-ground-outside-diameter-21mm-sku-22881200/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 60 teeth bore 20mm hardened and ground outside diameter 62mm SKU: 22486020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-60-teeth-bore-20mm-hardened-and-ground-outside-diameter-62mm-sku-22486020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 60 teeth bore 12mm hardened and ground outside diameter 62mm SKU: 22486000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-60-teeth-bore-12mm-hardened-and-ground-outside-diameter-62mm-sku-22486000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 50 teeth bore 20mm hardened and ground outside diameter 52mm SKU: 22485020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-50-teeth-bore-20mm-hardened-and-ground-outside-diameter-52mm-sku-22485020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 50 teeth bore 12mm hardened and ground outside diameter 52mm SKU: 22485000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-50-teeth-bore-12mm-hardened-and-ground-outside-diameter-52mm-sku-22485000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 48 teeth bore 15mm hardened and ground outside diameter 50mm SKU: 22484815](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-48-teeth-bore-15mm-hardened-and-ground-outside-diameter-50mm-sku-22484815/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 48 teeth bore 12mm hardened and ground outside diameter 50mm SKU: 22484800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-48-teeth-bore-12mm-hardened-and-ground-outside-diameter-50mm-sku-22484800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 40 teeth bore 15mm hardened and ground outside diameter 42mm SKU: 22484015](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-40-teeth-bore-15mm-hardened-and-ground-outside-diameter-42mm-sku-22484015/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 40 teeth bore 12mm hardened and ground outside diameter 42mm SKU: 22484000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-40-teeth-bore-12mm-hardened-and-ground-outside-diameter-42mm-sku-22484000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 36 teeth bore 15mm hardened and ground outside diameter 38mm SKU: 22483615](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-36-teeth-bore-15mm-hardened-and-ground-outside-diameter-38mm-sku-22483615/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 36 teeth bore 10mm hardened and ground outside diameter 38mm SKU: 22483600](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-36-teeth-bore-10mm-hardened-and-ground-outside-diameter-38mm-sku-22483600/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 30 teeth bore 12mm hardened and ground outside diameter 32mm SKU: 22483012](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-30-teeth-bore-12mm-hardened-and-ground-outside-diameter-32mm-sku-22483012/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 30 teeth bore 10mm hardened and ground outside diameter 32mm SKU: 22483000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-30-teeth-bore-10mm-hardened-and-ground-outside-diameter-32mm-sku-22483000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 25 teeth bore 12mm hardened and ground outside diameter 27mm SKU: 22482512](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-25-teeth-bore-12mm-hardened-and-ground-outside-diameter-27mm-sku-22482512/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 25 teeth bore 10mm hardened and ground outside diameter 27mm SKU: 22482500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-25-teeth-bore-10mm-hardened-and-ground-outside-diameter-27mm-sku-22482500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 24 teeth bore 12mm hardened and ground outside diameter 26mm SKU: 22482412](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-24-teeth-bore-12mm-hardened-and-ground-outside-diameter-26mm-sku-22482412/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 24 teeth bore 10mm hardened and ground outside diameter 26mm SKU: 22482400](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-24-teeth-bore-10mm-hardened-and-ground-outside-diameter-26mm-sku-22482400/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 20 teeth bore 8mm hardened and ground outside diameter 22mm SKU: 22482000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-20-teeth-bore-8mm-hardened-and-ground-outside-diameter-22mm-sku-22482000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 18 teeth bore 8mm hardened and ground outside diameter 20mm SKU: 22481800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-18-teeth-bore-8mm-hardened-and-ground-outside-diameter-20mm-sku-22481800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Spur gear stainless steel 1.4305 with hub module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 21899320](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-21899320/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21899280](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21899280/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 70 teeth tooth width 17mm outside diameter 108mm SKU: 21899270](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-70-teeth-tooth-width-17mm-outside-diameter-108mm-sku-21899270/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21899260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21899260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 55 teeth tooth width 17mm outside diameter 85.5mm SKU: 21899255](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-55-teeth-tooth-width-17mm-outside-diameter-85-5mm-sku-21899255/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21899250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21899250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 21899248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-21899248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21899245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21899245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21899240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21899240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 35 teeth tooth width 17mm outside diameter 55.5mm SKU: 21899235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-35-teeth-tooth-width-17mm-outside-diameter-55-5mm-sku-21899235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21899230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21899230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 28 teeth tooth width 17mm outside diameter 45mm SKU: 21899228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-28-teeth-tooth-width-17mm-outside-diameter-45mm-sku-21899228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21899225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21899225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 24 teeth tooth width 17mm outside diameter 39mm SKU: 21899224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-24-teeth-tooth-width-17mm-outside-diameter-39mm-sku-21899224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 20 teeth tooth width 17mm outside diameter 33mm SKU: 21899220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-20-teeth-tooth-width-17mm-outside-diameter-33mm-sku-21899220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 18 teeth tooth width 17mm outside diameter 30mm SKU: 21899218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-18-teeth-tooth-width-17mm-outside-diameter-30mm-sku-21899218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 17 teeth tooth width 17mm outside diameter 28.5mm SKU: 21899217](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-17-teeth-tooth-width-17mm-outside-diameter-28-5mm-sku-21899217/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 16 teeth tooth width 17mm outside diameter 27mm SKU: 21899216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-16-teeth-tooth-width-17mm-outside-diameter-27mm-sku-21899216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 15 teeth tooth width 17mm outside diameter 25.5mm SKU: 21899215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-15-teeth-tooth-width-17mm-outside-diameter-25-5mm-sku-21899215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 14 teeth tooth width 17mm outside diameter 24mm SKU: 21899214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-14-teeth-tooth-width-17mm-outside-diameter-24mm-sku-21899214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 13 teeth tooth width 17mm outside diameter 22.5mm SKU: 21899213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-13-teeth-tooth-width-17mm-outside-diameter-22-5mm-sku-21899213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 12 teeth tooth width 17mm outside diameter 21mm SKU: 21899212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-12-teeth-tooth-width-17mm-outside-diameter-21mm-sku-21899212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 11 teeth tooth width 17mm outside diameter 19.5mm SKU: 21899211](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-11-teeth-tooth-width-17mm-outside-diameter-19-5mm-sku-21899211/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 80 teeth tooth width 15mm outside diameter 123mm SKU: 21899080](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-123mm-sku-21899080/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 70 teeth tooth width 15mm outside diameter 108mm SKU: 21899070](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-108mm-sku-21899070/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 65 teeth tooth width 15mm outside diameter 100.5mm SKU: 21899065](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-65-teeth-tooth-width-15mm-outside-diameter-100-5mm-sku-21899065/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 60 teeth tooth width 15mm outside diameter 93mm SKU: 21899060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-93mm-sku-21899060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 55 teeth tooth width 15mm outside diameter 85.5mm SKU: 21899055](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-55-teeth-tooth-width-15mm-outside-diameter-85-5mm-sku-21899055/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 50 teeth tooth width 15mm outside diameter 78mm SKU: 21899050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-78mm-sku-21899050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel 1.4305 with hub module 1.5 48 teeth tooth width 15mm outside diameter 75mm SKU: 21899048](https://maedler.in/product/spur-gear-made-of-steel-1-4305-with-hub-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-75mm-sku-21899048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 45 teeth tooth width 15mm outside diameter 70.5mm SKU: 21899045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-70-5mm-sku-21899045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 40 teeth tooth width 15mm outside diameter 63mm SKU: 21899040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-63mm-sku-21899040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 35 teeth tooth width 15mm outside diameter 55.5mm SKU: 21899035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-35-teeth-tooth-width-15mm-outside-diameter-55-5mm-sku-21899035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 30 teeth tooth width 15mm outside diameter 48mm SKU: 21899030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-48mm-sku-21899030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 28 teeth tooth width 15mm outside diameter 45mm SKU: 21899028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-28-teeth-tooth-width-15mm-outside-diameter-45mm-sku-21899028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 25 teeth tooth width 15mm outside diameter 40.5mm SKU: 21899025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-40-5mm-sku-21899025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 24 teeth tooth width 15mm outside diameter 39mm SKU: 21899024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-24-teeth-tooth-width-15mm-outside-diameter-39mm-sku-21899024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 22 teeth tooth width 15mm outside diameter 36mm SKU: 21899022](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-22-teeth-tooth-width-15mm-outside-diameter-36mm-sku-21899022/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 20 teeth tooth width 15mm outside diameter 33mm SKU: 21899020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-20-teeth-tooth-width-15mm-outside-diameter-33mm-sku-21899020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 18 teeth tooth width 15mm outside diameter 30mm SKU: 21899018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-18-teeth-tooth-width-15mm-outside-diameter-30mm-sku-21899018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 17 teeth tooth width 15mm outside diameter 28,5mm SKU: 21899017](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-17-teeth-tooth-width-15mm-outside-diameter-285mm-sku-21899017/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 16 teeth tooth width 15mm outside diameter 27mm SKU: 21899016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-16-teeth-tooth-width-15mm-outside-diameter-27mm-sku-21899016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 15 teeth tooth width 15mm outside diameter 25.5mm SKU: 21899015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-15-teeth-tooth-width-15mm-outside-diameter-25-5mm-sku-21899015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 14 teeth tooth width 15mm outside diameter 24mm SKU: 21899014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-14-teeth-tooth-width-15mm-outside-diameter-24mm-sku-21899014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 12 teeth tooth width 15mm outside diameter 21mm SKU: 21899012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-12-teeth-tooth-width-15mm-outside-diameter-21mm-sku-21899012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 11 teeth tooth width 15mm outside diameter 19,5mm SKU: 21899011](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-11-teeth-tooth-width-15mm-outside-diameter-195mm-sku-21899011/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21895260](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21895260/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21895250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21895250/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21895240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21895240/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21895236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21895236/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21895232](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21895232/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21895230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21895230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21895225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21895225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 21895120](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-21895120/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 100 teeth tooth width 17mm outside diameter 153mm SKU: 21895100](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-100-teeth-tooth-width-17mm-outside-diameter-153mm-sku-21895100/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 90 teeth tooth width 17mm outside diameter 138mm SKU: 21895090](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-90-teeth-tooth-width-17mm-outside-diameter-138mm-sku-21895090/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21895080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21895080/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 72 teeth tooth width 17mm outside diameter 111mm SKU: 21895072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-72-teeth-tooth-width-17mm-outside-diameter-111mm-sku-21895072/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 70 teeth tooth width 17mm outside diameter 108mm SKU: 21895070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-70-teeth-tooth-width-17mm-outside-diameter-108mm-sku-21895070/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 64 teeth tooth width 17mm outside diameter 99mm SKU: 21895064](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-64-teeth-tooth-width-17mm-outside-diameter-99mm-sku-21895064/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21895060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21895060/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 56 teeth tooth width 17mm outside diameter 87mm SKU: 21895056](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-56-teeth-tooth-width-17mm-outside-diameter-87mm-sku-21895056/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21895050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21895050/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 21895048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-21895048/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21895045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21895045/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21895040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21895040/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21895036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21895036/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21895032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21895032/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21895030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21895030/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21895025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21895025/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 1.5 60 teeth tooth width 17mm outside diameter 93mm teeth induction hardened SKU: 21888160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-teeth-induction-hardened-sku-21888160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 50 teeth tooth width 17mm outside diameter 78mm teeth induction hardened SKU: 21888150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-teeth-induction-hardened-sku-21888150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23195250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23195250/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23195245](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23195245/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23195240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23195240/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23195236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23195236/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23195235](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23195235/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23195232](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23195232/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23195230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23195230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23195228](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23195228/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23195225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23195225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23195224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23195224/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23195220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23195220/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23195218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23195218/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 120 teeth tooth width 20mm outside diameter 244mm SKU: 23195120](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-120-teeth-tooth-width-20mm-outside-diameter-244mm-sku-23195120/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 100 teeth tooth width 20mm outside diameter 204mm SKU: 23195100](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-100-teeth-tooth-width-20mm-outside-diameter-204mm-sku-23195100/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 90 teeth tooth width 20mm outside diameter 184mm SKU: 23195090](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-90-teeth-tooth-width-20mm-outside-diameter-184mm-sku-23195090/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23195080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23195080/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 72 teeth tooth width 20mm outside diameter 148mm SKU: 23195072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-72-teeth-tooth-width-20mm-outside-diameter-148mm-sku-23195072/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 70 teeth tooth width 20mm outside diameter 144mm SKU: 23195070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-70-teeth-tooth-width-20mm-outside-diameter-144mm-sku-23195070/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 64 teeth tooth width 20mm outside diameter 132mm SKU: 23195064](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-64-teeth-tooth-width-20mm-outside-diameter-132mm-sku-23195064/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23195060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23195060/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 56 teeth tooth width 20mm outside diameter 116mm SKU: 23195056](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-56-teeth-tooth-width-20mm-outside-diameter-116mm-sku-23195056/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23195050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23195050/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 23195048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23195048/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23195045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23195045/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23195040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23195040/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23195036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23195036/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23195035](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23195035/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23195032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23195032/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23195030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23195030/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23195028](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23195028/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23195025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23195025/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23195024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23195024/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23195020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23195020/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23195018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23195018/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 2 60 teeth tooth width 20mm outside diameter 124mm teeth induction hardened SKU: 23188160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-teeth-induction-hardened-sku-23188160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 50 teeth tooth width 20mm outside diameter 104mm teeth induction hardened SKU: 23188150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-teeth-induction-hardened-sku-23188150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 48 teeth tooth width 20mm outside diameter 100mm teeth induction hardened SKU: 23188148](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-teeth-induction-hardened-sku-23188148/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 45 teeth tooth width 20mm outside diameter 94mm teeth induction hardened SKU: 23188145](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-teeth-induction-hardened-sku-23188145/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 40 teeth tooth width 20mm outside diameter 84mm teeth induction hardened SKU: 23188140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-teeth-induction-hardened-sku-23188140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 36 teeth tooth width 20mm outside diameter 76mm teeth induction hardened SKU: 23188136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-teeth-induction-hardened-sku-23188136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 32 teeth tooth width 20mm outside diameter 68mm teeth induction hardened SKU: 23188132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-teeth-induction-hardened-sku-23188132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 30 teeth tooth width 20mm outside diameter 64mm teeth induction hardened SKU: 23188130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-teeth-induction-hardened-sku-23188130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 28 teeth tooth width 20mm outside diameter 60mm teeth induction hardened SKU: 23188128](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-teeth-induction-hardened-sku-23188128/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 25 teeth tooth width 20mm outside diameter 54mm teeth induction hardened SKU: 23188125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-teeth-induction-hardened-sku-23188125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 24 teeth tooth width 20mm outside diameter 52mm teeth induction hardened SKU: 23188124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-teeth-induction-hardened-sku-23188124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 22 teeth tooth width 20mm outside diameter 48mm teeth induction hardened SKU: 23188122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-22-teeth-tooth-width-20mm-outside-diameter-48mm-teeth-induction-hardened-sku-23188122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 20 teeth tooth width 20mm outside diameter 44mm teeth induction hardened SKU: 23188120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-teeth-induction-hardened-sku-23188120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 18 teeth tooth width 20mm outside diameter 40mm teeth induction hardened SKU: 23188118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-teeth-induction-hardened-sku-23188118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 16 teeth tooth width 20mm outside diameter 36mm teeth induction hardened SKU: 23188116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-16-teeth-tooth-width-20mm-outside-diameter-36mm-teeth-induction-hardened-sku-23188116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 15 teeth tooth width 20mm outside diameter 34mm teeth induction hardened SKU: 23188115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-15-teeth-tooth-width-20mm-outside-diameter-34mm-teeth-induction-hardened-sku-23188115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 14 teeth tooth width 20mm outside diameter 32mm teeth induction hardened SKU: 23188114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-14-teeth-tooth-width-20mm-outside-diameter-32mm-teeth-induction-hardened-sku-23188114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 13 teeth tooth width 20mm outside diameter 30mm teeth induction hardened SKU: 23188113](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-13-teeth-tooth-width-20mm-outside-diameter-30mm-teeth-induction-hardened-sku-23188113/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 12 teeth tooth width 20mm outside diameter 28mm teeth induction hardened SKU: 23188112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-12-teeth-tooth-width-20mm-outside-diameter-28mm-teeth-induction-hardened-sku-23188112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23155280](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23155280/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23155260](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23155260/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23155250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23155250/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23155245](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23155245/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23155240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23155240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23155236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23155236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23155232](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23155232/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23155230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23155230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23155225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23155225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23155224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23155224/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23155220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23155220/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23155218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23155218/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 120 teeth tooth width 20mm outside diameter 244mm SKU: 23155120](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-120-teeth-tooth-width-20mm-outside-diameter-244mm-sku-23155120/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 100 teeth tooth width 20mm outside diameter 204mm SKU: 23155100](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-100-teeth-tooth-width-20mm-outside-diameter-204mm-sku-23155100/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 90 teeth tooth width 20mm outside diameter 184mm SKU: 23155090](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-90-teeth-tooth-width-20mm-outside-diameter-184mm-sku-23155090/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23155080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23155080/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 72 teeth tooth width 20mm outside diameter 148mm SKU: 23155072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-72-teeth-tooth-width-20mm-outside-diameter-148mm-sku-23155072/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 70 teeth tooth width 20mm outside diameter 144mm SKU: 23155070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-70-teeth-tooth-width-20mm-outside-diameter-144mm-sku-23155070/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 64 teeth tooth width 20mm outside diameter 132mm SKU: 23155064](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-64-teeth-tooth-width-20mm-outside-diameter-132mm-sku-23155064/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23155060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23155060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 56 teeth tooth width 20mm outside diameter 116mm SKU: 23155056](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-56-teeth-tooth-width-20mm-outside-diameter-116mm-sku-23155056/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23155050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23155050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 23155048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23155048/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23155045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23155045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23155040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23155040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23155036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23155036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23155035](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23155035/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23155032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23155032/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23155030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23155030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23155028](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23155028/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23155025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23155025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23155024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23155024/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23155020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23155020/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23155018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23155018/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Precision spur gear made of steel 16MnCr5 module 1.5 60 teeth bore 25mm hardened and ground outside diameter 93mm SKU: 22886025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-60-teeth-bore-25mm-hardened-and-ground-outside-diameter-93mm-sku-22886025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 60 teeth bore 15mm hardened and ground outside diameter 93mm SKU: 22886000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-60-teeth-bore-15mm-hardened-and-ground-outside-diameter-93mm-sku-22886000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 50 teeth bore 25mm hardened and ground outside diameter 78mm SKU: 22885025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-50-teeth-bore-25mm-hardened-and-ground-outside-diameter-78mm-sku-22885025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 50 teeth bore 15mm hardened and ground outside diameter 78mm SKU: 22885000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-50-teeth-bore-15mm-hardened-and-ground-outside-diameter-78mm-sku-22885000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 48 teeth bore 20mm hardened and ground outside diameter 75mm SKU: 22884820](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-48-teeth-bore-20mm-hardened-and-ground-outside-diameter-75mm-sku-22884820/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 48 teeth bore 15mm hardened and ground outside diameter 75mm SKU: 22884800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-48-teeth-bore-15mm-hardened-and-ground-outside-diameter-75mm-sku-22884800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 40 teeth bore 20mm hardened and ground outside diameter 63mm SKU: 22884020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-40-teeth-bore-20mm-hardened-and-ground-outside-diameter-63mm-sku-22884020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 40 teeth bore 12mm hardened and ground outside diameter 63mm SKU: 22884000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-40-teeth-bore-12mm-hardened-and-ground-outside-diameter-63mm-sku-22884000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 36 teeth bore 20mm hardened and ground outside diameter 57mm SKU: 22883620](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-36-teeth-bore-20mm-hardened-and-ground-outside-diameter-57mm-sku-22883620/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 36 teeth bore 12mm hardened and ground outside diameter 57mm SKU: 22883600](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-36-teeth-bore-12mm-hardened-and-ground-outside-diameter-57mm-sku-22883600/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 30 teeth bore 15mm hardened and ground outside diameter 48mm SKU: 22883015](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-30-teeth-bore-15mm-hardened-and-ground-outside-diameter-48mm-sku-22883015/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 30 teeth bore 12mm hardened and ground outside diameter 48mm SKU: 22883000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-30-teeth-bore-12mm-hardened-and-ground-outside-diameter-48mm-sku-22883000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 25 teeth bore 15mm hardened and ground outside diameter 40.5mm SKU: 22882515](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-25-teeth-bore-15mm-hardened-and-ground-outside-diameter-40-5mm-sku-22882515/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23295224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23295224/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23295220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23295220/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23295218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23295218/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 80 teeth tooth width 25mm outside diameter 205mm SKU: 23295080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-80-teeth-tooth-width-25mm-outside-diameter-205mm-sku-23295080/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 72 teeth tooth width 25mm outside diameter 185mm SKU: 23295072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-72-teeth-tooth-width-25mm-outside-diameter-185mm-sku-23295072/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 70 teeth tooth width 25mm outside diameter 180mm SKU: 23295070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-70-teeth-tooth-width-25mm-outside-diameter-180mm-sku-23295070/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 23295060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-23295060/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 23295050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-23295050/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 23295048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-23295048/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 45 teeth tooth width 25mm outside diameter 117.5mm SKU: 23295045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-45-teeth-tooth-width-25mm-outside-diameter-117-5mm-sku-23295045/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23295040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23295040/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 36 teeth tooth width 25mm outside diameter 95mm SKU: 23295036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-sku-23295036/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 32 teeth tooth width 25mm outside diameter 85mm SKU: 23295032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-sku-23295032/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23295030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23295030/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23295025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23295025/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23295024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23295024/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23295020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23295020/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23295018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23295018/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23295015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23295015/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 2.5 60 teeth tooth width 25mm outside diameter 155mm teeth induction hardened SKU: 23288160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-teeth-induction-hardened-sku-23288160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 50 teeth tooth width 25mm outside diameter 130mm teeth induction hardened SKU: 23288150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-teeth-induction-hardened-sku-23288150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 40 teeth tooth width 25mm outside diameter 105mm teeth induction hardened SKU: 23288140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-teeth-induction-hardened-sku-23288140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 36 teeth tooth width 25mm outside diameter 95mm teeth induction hardened SKU: 23288136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-teeth-induction-hardened-sku-23288136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 32 teeth tooth width 25mm outside diameter 85mm teeth induction hardened SKU: 23288132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-teeth-induction-hardened-sku-23288132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 30 teeth tooth width 25mm outside diameter 80mm teeth induction hardened SKU: 23288130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-teeth-induction-hardened-sku-23288130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm teeth induction hardened SKU: 23288125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-teeth-induction-hardened-sku-23288125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 24 teeth tooth width 25mm outside diameter 65mm teeth induction hardened SKU: 23288124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-teeth-induction-hardened-sku-23288124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 22 teeth tooth width 25mm outside diameter 60mm teeth induction hardened SKU: 23288122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-22-teeth-tooth-width-25mm-outside-diameter-60mm-teeth-induction-hardened-sku-23288122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 20 teeth tooth width 25mm outside diameter 55mm teeth induction hardened SKU: 23288120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-teeth-induction-hardened-sku-23288120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 18 teeth tooth width 25mm outside diameter 50mm teeth induction hardened SKU: 23288118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-teeth-induction-hardened-sku-23288118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 16 teeth tooth width 25mm outside diameter 45mm teeth induction hardened SKU: 23288116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-16-teeth-tooth-width-25mm-outside-diameter-45mm-teeth-induction-hardened-sku-23288116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm teeth induction hardened SKU: 23288115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-teeth-induction-hardened-sku-23288115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm teeth induction hardened SKU: 23288112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-12-teeth-tooth-width-25mm-outside-diameter-35mm-teeth-induction-hardened-sku-23288112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23255240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23255240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 36 teeth tooth width 25mm outside diameter 95mm SKU: 23255236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-sku-23255236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23255230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23255230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23255225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23255225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23255224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23255224/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23255220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23255220/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23255215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23255215/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 80 teeth tooth width 25mm outside diameter 205mm SKU: 23255080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-80-teeth-tooth-width-25mm-outside-diameter-205mm-sku-23255080/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 72 teeth tooth width 25mm outside diameter 185mm SKU: 23255072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-72-teeth-tooth-width-25mm-outside-diameter-185mm-sku-23255072/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 70 teeth tooth width 25mm outside diameter 180mm SKU: 23255070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-70-teeth-tooth-width-25mm-outside-diameter-180mm-sku-23255070/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 23255060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-23255060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 23255050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-23255050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 23255048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-23255048/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 45 teeth tooth width 25mm outside diameter 117,5mm SKU: 23255045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-45-teeth-tooth-width-25mm-outside-diameter-1175mm-sku-23255045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23255040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23255040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 36 teeth tooth width 25mm outside diameter 95mm SKU: 23255036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-sku-23255036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 32 teeth tooth width 25mm outside diameter 85mm SKU: 23255032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-sku-23255032/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23255030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23255030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23255025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23255025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23255024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23255024/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23255020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23255020/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23255018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23255018/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23255015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23255015/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear stainless steel 1.4305 with hub module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23199280](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23199280/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23199260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23199260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 55 teeth tooth width 20mm outside diameter 114mm SKU: 23199255](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-55-teeth-tooth-width-20mm-outside-diameter-114mm-sku-23199255/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23199250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23199250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 23199248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23199248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23199245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23199245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23199240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23199240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23199236](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23199236/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23199235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23199235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23199230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23199230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23199228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23199228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23199225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23199225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23199224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23199224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 22 teeth tooth width 20mm outside diameter 48mm SKU: 23199222](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-22-teeth-tooth-width-20mm-outside-diameter-48mm-sku-23199222/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23199220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23199220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23199218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23199218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 16 teeth tooth width 20mm outside diameter 36mm SKU: 23199216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-16-teeth-tooth-width-20mm-outside-diameter-36mm-sku-23199216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 15 teeth tooth width 20mm outside diameter 34mm SKU: 23199215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-15-teeth-tooth-width-20mm-outside-diameter-34mm-sku-23199215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 14 teeth tooth width 20mm outside diameter 32mm SKU: 23199214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-14-teeth-tooth-width-20mm-outside-diameter-32mm-sku-23199214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 13 teeth tooth width 20mm outside diameter 30mm SKU: 23199213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-13-teeth-tooth-width-20mm-outside-diameter-30mm-sku-23199213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 12 teeth tooth width 20mm outside diameter 28mm SKU: 23199212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-12-teeth-tooth-width-20mm-outside-diameter-28mm-sku-23199212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 11 teeth tooth width 20mm outside diameter 26mm SKU: 23199211](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-11-teeth-tooth-width-20mm-outside-diameter-26mm-sku-23199211/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 10 teeth tooth width 20mm outside diameter 24mm SKU: 23199210](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-10-teeth-tooth-width-20mm-outside-diameter-24mm-sku-23199210/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 80 teeth tooth width 16mm outside diameter 164m SKU: 23199080](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-80-teeth-tooth-width-16mm-outside-diameter-164m-sku-23199080/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 60 teeth tooth width 16mm outside diameter 124mm SKU: 23199060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-60-teeth-tooth-width-16mm-outside-diameter-124mm-sku-23199060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 55 teeth tooth width 16mm outside diameter 114mm SKU: 23199055](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-55-teeth-tooth-width-16mm-outside-diameter-114mm-sku-23199055/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 50 teeth tooth width 16mm outside diameter 104mm SKU: 23199050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-50-teeth-tooth-width-16mm-outside-diameter-104mm-sku-23199050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 48 teeth tooth width 16mm outside diameter 100mm SKU: 23199048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-48-teeth-tooth-width-16mm-outside-diameter-100mm-sku-23199048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 45 teeth tooth width 16mm outside diameter 94mm SKU: 23199045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-45-teeth-tooth-width-16mm-outside-diameter-94mm-sku-23199045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 40 teeth tooth width 16mm outside diameter 84mm SKU: 23199040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-40-teeth-tooth-width-16mm-outside-diameter-84mm-sku-23199040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 35 teeth tooth width 16mm outside diameter 74mm SKU: 23199035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-35-teeth-tooth-width-16mm-outside-diameter-74mm-sku-23199035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 30 teeth tooth width 16mm outside diameter 64mm SKU: 23199030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-30-teeth-tooth-width-16mm-outside-diameter-64mm-sku-23199030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 28 teeth tooth width 16mm outside diameter 60m SKU: 23199028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-28-teeth-tooth-width-16mm-outside-diameter-60m-sku-23199028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 25 teeth tooth width 16mm outside diameter 54mm SKU: 23199025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-25-teeth-tooth-width-16mm-outside-diameter-54mm-sku-23199025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 24 teeth tooth width 16mm outside diameter 52mm SKU: 23199024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-24-teeth-tooth-width-16mm-outside-diameter-52mm-sku-23199024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 22 teeth tooth width 16mm outside diameter 48m SKU: 23199022](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-22-teeth-tooth-width-16mm-outside-diameter-48m-sku-23199022/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 20 teeth tooth width 16mm outside diameter 44mm SKU: 23199020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-20-teeth-tooth-width-16mm-outside-diameter-44mm-sku-23199020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 18 teeth tooth width 16mm outside diameter 40mm SKU: 23199018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-18-teeth-tooth-width-16mm-outside-diameter-40mm-sku-23199018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 16 teeth tooth width 16mm outside diameter 36m SKU: 23199016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-16-teeth-tooth-width-16mm-outside-diameter-36m-sku-23199016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 15 teeth tooth width 16mm outside diameter 34mm SKU: 23199015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-15-teeth-tooth-width-16mm-outside-diameter-34mm-sku-23199015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 14 teeth tooth width 16mm outside diameter 32mm SKU: 23199014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-14-teeth-tooth-width-16mm-outside-diameter-32mm-sku-23199014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 12 teeth tooth width 16mm outside diameter 28mm SKU: 23199012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-12-teeth-tooth-width-16mm-outside-diameter-28mm-sku-23199012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 11 teeth tooth width 16mm outside diameter 26mm SKU: 23199011](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-11-teeth-tooth-width-16mm-outside-diameter-26mm-sku-23199011/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 10 teeth tooth width 16mm outside diameter 24mm SKU: 23199010](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-10-teeth-tooth-width-16mm-outside-diameter-24mm-sku-23199010/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 15 teeth tooth width 25mm outside diameter 51mm SKU: 23399015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-15-teeth-tooth-width-25mm-outside-diameter-51mm-sku-23399015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 14 teeth tooth width 25mm outside diameter 48mm SKU: 23399014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-14-teeth-tooth-width-25mm-outside-diameter-48mm-sku-23399014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 12 teeth tooth width 25mm outside diameter 42mm SKU: 23399012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-12-teeth-tooth-width-25mm-outside-diameter-42mm-sku-23399012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23395240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23395240/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23395236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23395236/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23395230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23395230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23395225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23395225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23395224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23395224/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23395220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23395220/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23395218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23395218/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23395215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23395215/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 23395060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-23395060/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 23395050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-23395050/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 23395048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-23395048/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 45 teeth tooth width 30mm outside diameter 141mm SKU: 23395045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-45-teeth-tooth-width-30mm-outside-diameter-141mm-sku-23395045/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23395040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23395040/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23395036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23395036/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23395030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23395030/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23395025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23395025/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23395024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23395024/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23395020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23395020/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23395018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23395018/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23395015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23395015/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 3 60 teeth tooth width 30mm outside diameter 186mm teeth induction hardened SKU: 23388160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-teeth-induction-hardened-sku-23388160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 50 teeth tooth width 30mm outside diameter 156mm teeth induction hardened SKU: 23388150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-teeth-induction-hardened-sku-23388150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 40 teeth tooth width 30mm outside diameter 126mm teeth induction hardened SKU: 23388140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-teeth-induction-hardened-sku-23388140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 36 teeth tooth width 30mm outside diameter 114mm teeth induction hardened SKU: 23388136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-teeth-induction-hardened-sku-23388136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 35 teeth tooth width 30mm outside diameter 111mm teeth induction hardened SKU: 23388135](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-35-teeth-tooth-width-30mm-outside-diameter-111mm-teeth-induction-hardened-sku-23388135/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 32 teeth tooth width 30mm outside diameter 102mm teeth induction hardened SKU: 23388132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-32-teeth-tooth-width-30mm-outside-diameter-102mm-teeth-induction-hardened-sku-23388132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 30 teeth tooth width 30mm outside diameter 96mm teeth induction hardened SKU: 23388130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-teeth-induction-hardened-sku-23388130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 25 teeth tooth width 30mm outside diameter 81mm teeth induction hardened SKU: 23388125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-teeth-induction-hardened-sku-23388125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 24 teeth tooth width 30mm outside diameter 78mm teeth induction hardened SKU: 23388124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-teeth-induction-hardened-sku-23388124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 22 teeth tooth width 30mm outside diameter 72mm teeth induction hardened SKU: 23388122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-22-teeth-tooth-width-30mm-outside-diameter-72mm-teeth-induction-hardened-sku-23388122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 20 teeth tooth width 30mm outside diameter 66mm teeth induction hardened SKU: 23388120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-teeth-induction-hardened-sku-23388120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 18 teeth tooth width 30mm outside diameter 60mm teeth induction hardened SKU: 23388118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-teeth-induction-hardened-sku-23388118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 17 teeth tooth width 30mm outside diameter 57mm teeth induction hardened SKU: 23388117](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-17-teeth-tooth-width-30mm-outside-diameter-57mm-teeth-induction-hardened-sku-23388117/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 16 teeth tooth width 30mm outside diameter 54mm teeth induction hardened SKU: 23388116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-16-teeth-tooth-width-30mm-outside-diameter-54mm-teeth-induction-hardened-sku-23388116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 15 teeth tooth width 30mm outside diameter 51mm teeth induction hardened SKU: 23388115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-teeth-induction-hardened-sku-23388115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 14 teeth tooth width 30mm outside diameter 48mm teeth induction hardened SKU: 23388114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-14-teeth-tooth-width-30mm-outside-diameter-48mm-teeth-induction-hardened-sku-23388114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 12 teeth tooth width 30mm outside diameter 42mm teeth induction hardened SKU: 23388112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-12-teeth-tooth-width-30mm-outside-diameter-42mm-teeth-induction-hardened-sku-23388112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23355240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23355240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23355236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23355236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23355230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23355230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23355225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23355225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23355224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23355224/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23355220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23355220/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23355218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23355218/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23355215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23355215/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 23355060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-23355060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 23355050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-23355050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 23355048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-23355048/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 45 teeth tooth width 30mm outside diameter 141mm SKU: 23355045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-45-teeth-tooth-width-30mm-outside-diameter-141mm-sku-23355045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23355040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23355040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23355036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23355036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23355030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23355030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23355025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23355025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23355024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23355024/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23355020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23355020/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23355018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23355018/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23355015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23355015/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear stainless steel 1.4305 with hub module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 23299260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-23299260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 55 teeth tooth width 25mm outside diameter 142.5mm SKU: 23299255](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-55-teeth-tooth-width-25mm-outside-diameter-142-5mm-sku-23299255/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 23299250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-23299250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 23299248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-23299248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 45 teeth tooth width 25mm outside diameter 117.5mm SKU: 23299245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-45-teeth-tooth-width-25mm-outside-diameter-117-5mm-sku-23299245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23299240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23299240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 35 teeth tooth width 25mm outside diameter 92.5mm SKU: 23299235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-35-teeth-tooth-width-25mm-outside-diameter-92-5mm-sku-23299235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 32 teeth tooth width 25mm outside diameter 85mm SKU: 23299232](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-sku-23299232/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23299230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23299230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 28 teeth tooth width 25mm outside diameter 75mm SKU: 23299228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-28-teeth-tooth-width-25mm-outside-diameter-75mm-sku-23299228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23299225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23299225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23299224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23299224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23299220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23299220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23299218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23299218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 16 teeth tooth width 25mm outside diameter 45mm SKU: 23299216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-16-teeth-tooth-width-25mm-outside-diameter-45mm-sku-23299216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23299215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23299215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 14 teeth tooth width 25mm outside diameter 40mm SKU: 23299214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-14-teeth-tooth-width-25mm-outside-diameter-40mm-sku-23299214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 13 teeth tooth width 25mm outside diameter 37.5mm SKU: 23299213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-13-teeth-tooth-width-25mm-outside-diameter-37-5mm-sku-23299213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm SKU: 23299212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-12-teeth-tooth-width-25mm-outside-diameter-35mm-sku-23299212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 60 teeth tooth width 20mm outside diameter 155mm SKU: 23299060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-60-teeth-tooth-width-20mm-outside-diameter-155mm-sku-23299060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 55 teeth tooth width 20mm outside diameter 142.5mm SKU: 23299055](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-55-teeth-tooth-width-20mm-outside-diameter-142-5mm-sku-23299055/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 50 teeth tooth width 20mm outside diameter 130mm SKU: 23299050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-50-teeth-tooth-width-20mm-outside-diameter-130mm-sku-23299050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 48 teeth tooth width 20mm outside diameter 125mm SKU: 23299048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-48-teeth-tooth-width-20mm-outside-diameter-125mm-sku-23299048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 45 teeth tooth width 20mm outside diameter 117.5mm SKU: 23299045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-45-teeth-tooth-width-20mm-outside-diameter-117-5mm-sku-23299045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 40 teeth tooth width 20mm outside diameter 105mm SKU: 23299040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-40-teeth-tooth-width-20mm-outside-diameter-105mm-sku-23299040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 35 teeth tooth width 20mm outside diameter 92.5mm SKU: 23299035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-35-teeth-tooth-width-20mm-outside-diameter-92-5mm-sku-23299035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 32 teeth tooth width 20mm outside diameter 85mm SKU: 23299032](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-32-teeth-tooth-width-20mm-outside-diameter-85mm-sku-23299032/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 30 teeth tooth width 20mm outside diameter 80mm SKU: 23299030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-30-teeth-tooth-width-20mm-outside-diameter-80mm-sku-23299030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 28 teeth tooth width 20mm outside diameter 75mm SKU: 23299028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-28-teeth-tooth-width-20mm-outside-diameter-75mm-sku-23299028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm SKU: 23299025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-25-teeth-tooth-width-20mm-outside-diameter-67-5mm-sku-23299025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 24 teeth tooth width 20mm outside diameter 65mm SKU: 23299024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-24-teeth-tooth-width-20mm-outside-diameter-65mm-sku-23299024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 20 teeth tooth width 20mm outside diameter 55mm SKU: 23299020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-20-teeth-tooth-width-20mm-outside-diameter-55mm-sku-23299020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 18 teeth tooth width 20mm outside diameter 50mm SKU: 23299018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-18-teeth-tooth-width-20mm-outside-diameter-50mm-sku-23299018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 16 teeth tooth width 20mm outside diameter 45mm SKU: 23299016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-16-teeth-tooth-width-20mm-outside-diameter-45mm-sku-23299016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 15 teeth tooth width 20mm outside diameter 42.5mm SKU: 23299015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-15-teeth-tooth-width-20mm-outside-diameter-42-5mm-sku-23299015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 14 teeth tooth width 20mm outside diameter 40mm SKU: 23299014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-14-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23299014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 12 teeth tooth width 20mm outside diameter 35mm SKU: 23299012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-12-teeth-tooth-width-20mm-outside-diameter-35mm-sku-23299012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23295240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23295240/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23295230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23295230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23295225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23295225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of stainless steel 1.4305 with hub module 4 30 teeth tooth width 30mm outside diameter 128mm SKU: 23499030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-30-teeth-tooth-width-30mm-outside-diameter-128mm-sku-23499030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 28 teeth tooth width 30mm outside diameter 120mm SKU: 23499028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-28-teeth-tooth-width-30mm-outside-diameter-120mm-sku-23499028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 25 teeth tooth width 30mm outside diameter 108mm SKU: 23499025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-25-teeth-tooth-width-30mm-outside-diameter-108mm-sku-23499025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 24 teeth tooth width 30mm outside diameter 104mm SKU: 23499024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-24-teeth-tooth-width-30mm-outside-diameter-104mm-sku-23499024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 20 teeth tooth width 30mm outside diameter 88mm SKU: 23499020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-20-teeth-tooth-width-30mm-outside-diameter-88mm-sku-23499020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 18 teeth tooth width 30mm outside diameter 80mm SKU: 23499018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-18-teeth-tooth-width-30mm-outside-diameter-80mm-sku-23499018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 16 teeth tooth width 30mm outside diameter 72mm SKU: 23499016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-16-teeth-tooth-width-30mm-outside-diameter-72mm-sku-23499016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 15 teeth tooth width 30mm outside diameter 68mm SKU: 23499015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-15-teeth-tooth-width-30mm-outside-diameter-68mm-sku-23499015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 14 teeth tooth width 30mm outside diameter 64mm SKU: 23499014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-14-teeth-tooth-width-30mm-outside-diameter-64mm-sku-23499014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 12 teeth tooth width 30mm outside diameter 56mm SKU: 23499012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-12-teeth-tooth-width-30mm-outside-diameter-56mm-sku-23499012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23495250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23495250/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23495230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23495230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23495225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23495225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23495224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23495224/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23495220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23495220/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23495215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23495215/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 23495060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-23495060/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23495050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23495050/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 45 teeth tooth width 40mm outside diameter 188mm SKU: 23495045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-45-teeth-tooth-width-40mm-outside-diameter-188mm-sku-23495045/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23495040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23495040/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 23495036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-23495036/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23495030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23495030/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23495025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23495025/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23495024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23495024/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23495020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23495020/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 16 teeth tooth width 40mm outside diameter 72mm SKU: 23495016](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-sku-23495016/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23495015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23495015/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 12 teeth tooth width 40mm outside diameter 56mm SKU: 23495012](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-sku-23495012/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 4 60 teeth tooth width 40mm outside diameter 248mm teeth induction hardened SKU: 23488160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-teeth-induction-hardened-sku-23488160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 50 teeth tooth width 40mm outside diameter 208mm teeth induction hardened SKU: 23488150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-teeth-induction-hardened-sku-23488150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 40 teeth tooth width 40mm outside diameter 168mm teeth induction hardened SKU: 23488140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-teeth-induction-hardened-sku-23488140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 36 teeth tooth width 40mm outside diameter 152mm teeth induction hardened SKU: 23488136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-teeth-induction-hardened-sku-23488136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 35 teeth tooth width 40mm outside diameter 148mm teeth induction hardened SKU: 23488135](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-35-teeth-tooth-width-40mm-outside-diameter-148mm-teeth-induction-hardened-sku-23488135/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 32 teeth tooth width 40mm outside diameter 136mm teeth induction hardened SKU: 23488132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-32-teeth-tooth-width-40mm-outside-diameter-136mm-teeth-induction-hardened-sku-23488132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 30 teeth tooth width 40mm outside diameter 128mm teeth induction hardened SKU: 23488130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-teeth-induction-hardened-sku-23488130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 25 teeth tooth width 40mm outside diameter 108mm teeth induction hardened SKU: 23488125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-teeth-induction-hardened-sku-23488125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 24 teeth tooth width 40mm outside diameter 104mm teeth induction hardened SKU: 23488124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-teeth-induction-hardened-sku-23488124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 22 teeth tooth width 40mm outside diameter 96mm teeth induction hardened SKU: 23488122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-22-teeth-tooth-width-40mm-outside-diameter-96mm-teeth-induction-hardened-sku-23488122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 20 teeth tooth width 40mm outside diameter 88mm teeth induction hardened SKU: 23488120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-teeth-induction-hardened-sku-23488120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 18 teeth tooth width 40mm outside diameter 80mm teeth induction hardened SKU: 23488118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-18-teeth-tooth-width-40mm-outside-diameter-80mm-teeth-induction-hardened-sku-23488118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 17 teeth tooth width 40mm outside diameter 76mm teeth induction hardened SKU: 23488117](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-17-teeth-tooth-width-40mm-outside-diameter-76mm-teeth-induction-hardened-sku-23488117/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 16 teeth tooth width 40mm outside diameter 72mm teeth induction hardened SKU: 23488116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-teeth-induction-hardened-sku-23488116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 15 teeth tooth width 40mm outside diameter 68mm teeth induction hardened SKU: 23488115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-teeth-induction-hardened-sku-23488115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 14 teeth tooth width 40mm outside diameter 64mm teeth induction hardened SKU: 23488114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-14-teeth-tooth-width-40mm-outside-diameter-64mm-teeth-induction-hardened-sku-23488114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 13 teeth tooth width 40mm outside diameter 60mm teeth induction hardened SKU: 23488113](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-13-teeth-tooth-width-40mm-outside-diameter-60mm-teeth-induction-hardened-sku-23488113/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 12 teeth tooth width 40mm outside diameter 56mm teeth induction hardened SKU: 23488112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-teeth-induction-hardened-sku-23488112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23455250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23455250/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23455240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23455240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 23455236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-23455236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23455230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23455230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23455225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23455225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23455224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23455224/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23455220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23455220/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23455215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23455215/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 23455060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-23455060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23455050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23455050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 45 teeth tooth width 40mm outside diameter 188mm SKU: 23455045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-45-teeth-tooth-width-40mm-outside-diameter-188mm-sku-23455045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23455040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23455040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 23455036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-23455036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23455030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23455030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23455025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23455025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23455024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23455024/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23455020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23455020/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 16 teeth tooth width 40mm outside diameter 72mm SKU: 23455016](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-sku-23455016/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23455015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23455015/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 12 teeth tooth width 40mm outside diameter 56mm SKU: 23455012](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-sku-23455012/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear stainless steel 1.4305 with hub module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 23399260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-23399260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 23399250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-23399250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 23399248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-23399248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 45 teeth tooth width 30mm outside diameter 141mm SKU: 23399245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-45-teeth-tooth-width-30mm-outside-diameter-141mm-sku-23399245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23399240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23399240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23399236](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23399236/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 35 teeth tooth width 30mm outside diameter 111mm SKU: 23399235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-35-teeth-tooth-width-30mm-outside-diameter-111mm-sku-23399235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23399230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23399230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 28 teeth tooth width 30mm outside diameter 90mm SKU: 23399228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-28-teeth-tooth-width-30mm-outside-diameter-90mm-sku-23399228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23399225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23399225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23399224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23399224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 22 teeth tooth width 30mm outside diameter 72mm SKU: 23399222](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-22-teeth-tooth-width-30mm-outside-diameter-72mm-sku-23399222/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23399220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23399220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23399218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23399218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 16 teeth tooth width 30mm outside diameter 54mm SKU: 23399216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-16-teeth-tooth-width-30mm-outside-diameter-54mm-sku-23399216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23399215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23399215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 14 teeth tooth width 30mm outside diameter 48mm SKU: 23399214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-14-teeth-tooth-width-30mm-outside-diameter-48mm-sku-23399214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 12 teeth tooth width 30mm outside diameter 42mm SKU: 23399212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-12-teeth-tooth-width-30mm-outside-diameter-42mm-sku-23399212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 60 teeth tooth width 25mm outside diameter 186mm SKU: 23399060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-60-teeth-tooth-width-25mm-outside-diameter-186mm-sku-23399060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 50 teeth tooth width 25mm outside diameter 156mm SKU: 23399050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-50-teeth-tooth-width-25mm-outside-diameter-156mm-sku-23399050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 48 teeth tooth width 25mm outside diameter 150mm SKU: 23399048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-48-teeth-tooth-width-25mm-outside-diameter-150mm-sku-23399048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 45 teeth tooth width 25mm outside diameter 141mm SKU: 23399045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-45-teeth-tooth-width-25mm-outside-diameter-141mm-sku-23399045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 40 teeth tooth width 25mm outside diameter 126mm SKU: 23399040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-40-teeth-tooth-width-25mm-outside-diameter-126mm-sku-23399040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 36 teeth tooth width 25mm outside diameter 114mm SKU: 23399036](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-36-teeth-tooth-width-25mm-outside-diameter-114mm-sku-23399036/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 35 teeth tooth width 25mm outside diameter 111mm SKU: 23399035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-35-teeth-tooth-width-25mm-outside-diameter-111mm-sku-23399035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 30 teeth tooth width 25mm outside diameter 96mm SKU: 23399030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-30-teeth-tooth-width-25mm-outside-diameter-96mm-sku-23399030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 28 teeth tooth width 25mm outside diameter 90mm SKU: 23399028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-28-teeth-tooth-width-25mm-outside-diameter-90mm-sku-23399028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 26 teeth tooth width 25mm outside diameter 84mm SKU: 23399026](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-26-teeth-tooth-width-25mm-outside-diameter-84mm-sku-23399026/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 25 teeth tooth width 25mm outside diameter 81mm SKU: 23399025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-25-teeth-tooth-width-25mm-outside-diameter-81mm-sku-23399025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 24 teeth tooth width 25mm outside diameter 78mm SKU: 23399024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-24-teeth-tooth-width-25mm-outside-diameter-78mm-sku-23399024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 22 teeth tooth width 25mm outside diameter 72mm SKU: 23399022](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-22-teeth-tooth-width-25mm-outside-diameter-72mm-sku-23399022/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 20 teeth tooth width 25mm outside diameter 66mm SKU: 23399020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-20-teeth-tooth-width-25mm-outside-diameter-66mm-sku-23399020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 18 teeth tooth width 25mm outside diameter 60mm SKU: 23399018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-teeth-tooth-width-25mm-outside-diameter-60mm-sku-23399018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 16 teeth tooth width 25mm outside diameter 54mm SKU: 23399016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-16-teeth-tooth-width-25mm-outside-diameter-54mm-sku-23399016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Precision spur gear made of steel 16MnCr5 module 2 40 teeth bore 25mm hardened and ground outside diameter 84mm SKU: 24184025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-40-teeth-bore-25mm-hardened-and-ground-outside-diameter-84mm-sku-24184025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 40 teeth bore 20mm hardened and ground outside diameter 84mm SKU: 24184020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-40-teeth-bore-20mm-hardened-and-ground-outside-diameter-84mm-sku-24184020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 40 teeth bore 15mm hardened and ground outside diameter 84mm SKU: 24184000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-40-teeth-bore-15mm-hardened-and-ground-outside-diameter-84mm-sku-24184000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 36 teeth bore 25mm hardened and ground outside diameter 76mm SKU: 24183625](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-36-teeth-bore-25mm-hardened-and-ground-outside-diameter-76mm-sku-24183625/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 36 teeth bore 20mm hardened and ground outside diameter 76mm SKU: 24183620](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-36-teeth-bore-20mm-hardened-and-ground-outside-diameter-76mm-sku-24183620/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 36 teeth bore 15mm hardened and ground outside diameter 76mm SKU: 24183600](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-36-teeth-bore-15mm-hardened-and-ground-outside-diameter-76mm-sku-24183600/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 25mm hardened and ground outside diameter 64mm SKU: 24183025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-25mm-hardened-and-ground-outside-diameter-64mm-sku-24183025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 20mm hardened and ground outside diameter 64mm SKU: 24183020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-20mm-hardened-and-ground-outside-diameter-64mm-sku-24183020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 15mm hardened and ground outside diameter 64mm SKU: 24183000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-15mm-hardened-and-ground-outside-diameter-64mm-sku-24183000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 25 teeth bore 20mm hardened and ground outside diameter 54mm SKU: 24182520](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-25-teeth-bore-20mm-hardened-and-ground-outside-diameter-54mm-sku-24182520/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 25 teeth bore 15mm hardened and ground outside diameter 54mm SKU: 24182500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-25-teeth-bore-15mm-hardened-and-ground-outside-diameter-54mm-sku-24182500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 24 teeth bore 20mm hardened and ground outside diameter 52mm SKU: 24182420](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-24-teeth-bore-20mm-hardened-and-ground-outside-diameter-52mm-sku-24182420/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 24 teeth bore 15mm hardened and ground outside diameter 52mm SKU: 24182415](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-24-teeth-bore-15mm-hardened-and-ground-outside-diameter-52mm-sku-24182415/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 24 teeth bore 12mm hardened and ground outside diameter 52mm SKU: 24182400](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-24-teeth-bore-12mm-hardened-and-ground-outside-diameter-52mm-sku-24182400/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 20 teeth bore 15mm hardened and ground outside diameter 44mm SKU: 24182015](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-20-teeth-bore-15mm-hardened-and-ground-outside-diameter-44mm-sku-24182015/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 20 teeth bore 12mm hardened and ground outside diameter 44mm SKU: 24182000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-20-teeth-bore-12mm-hardened-and-ground-outside-diameter-44mm-sku-24182000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 18 teeth bore 15mm hardened and ground outside diameter 40mm SKU: 24181815](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-18-teeth-bore-15mm-hardened-and-ground-outside-diameter-40mm-sku-24181815/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 18 teeth bore 12mm hardened and ground outside diameter 40mm SKU: 24181800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-18-teeth-bore-12mm-hardened-and-ground-outside-diameter-40mm-sku-24181800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 15 teeth bore 15mm hardened and ground outside diameter 34mm SKU: 24181515](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-15-teeth-bore-15mm-hardened-and-ground-outside-diameter-34mm-sku-24181515/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 15 teeth bore 12mm hardened and ground outside diameter 34mm SKU: 24181500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-15-teeth-bore-12mm-hardened-and-ground-outside-diameter-34mm-sku-24181500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 12 teeth bore 10mm hardened and ground outside diameter 28mm SKU: 24181200](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-12-teeth-bore-10mm-hardened-and-ground-outside-diameter-28mm-sku-24181200/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Spur gear made of steel C45 with hub module 10 32 teeth tooth width 100mm outside diameter 340mm SKU: 23903200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-32-teeth-tooth-width-100mm-outside-diameter-340mm-sku-23903200/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 30 teeth tooth width 100mm outside diameter 320mm SKU: 23903000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-30-teeth-tooth-width-100mm-outside-diameter-320mm-sku-23903000/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 25 teeth tooth width 100mm outside diameter 270mm SKU: 23902500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-25-teeth-tooth-width-100mm-outside-diameter-270mm-sku-23902500/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 24 teeth tooth width 100mm outside diameter 260mm SKU: 23902400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-24-teeth-tooth-width-100mm-outside-diameter-260mm-sku-23902400/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 20 teeth tooth width 100mm outside diameter 220mm SKU: 23902000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-20-teeth-tooth-width-100mm-outside-diameter-220mm-sku-23902000/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 18 teeth tooth width 100mm outside diameter 200mm SKU: 23901800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-18-teeth-tooth-width-100mm-outside-diameter-200mm-sku-23901800/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 17 teeth tooth width 100mm outside diameter 190mm SKU: 23901700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-17-teeth-tooth-width-100mm-outside-diameter-190mm-sku-23901700/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 16 teeth tooth width 100mm outside diameter 180mm SKU: 23901600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-16-teeth-tooth-width-100mm-outside-diameter-180mm-sku-23901600/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 15 teeth tooth width 100mm outside diameter 170mm SKU: 23901500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-15-teeth-tooth-width-100mm-outside-diameter-170mm-sku-23901500/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 14 teeth tooth width 100mm outside diameter 160mm SKU: 23901400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-14-teeth-tooth-width-100mm-outside-diameter-160mm-sku-23901400/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 12 teeth tooth width 100mm outside diameter 140mm SKU: 23901200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-12-teeth-tooth-width-100mm-outside-diameter-140mm-sku-23901200/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 36 teeth tooth width 80mm outside diameter 304mm teeth induction hardened SKU: 23888136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-36-teeth-tooth-width-80mm-outside-diameter-304mm-teeth-induction-hardened-sku-23888136/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 30 teeth tooth width 80mm outside diameter 256mm teeth induction hardened SKU: 23888130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-30-teeth-tooth-width-80mm-outside-diameter-256mm-teeth-induction-hardened-sku-23888130/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 25 teeth tooth width 80mm outside diameter 216mm teeth induction hardened SKU: 23888125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-25-teeth-tooth-width-80mm-outside-diameter-216mm-teeth-induction-hardened-sku-23888125/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 24 teeth tooth width 80mm outside diameter 208mm teeth induction hardened SKU: 23888124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-24-teeth-tooth-width-80mm-outside-diameter-208mm-teeth-induction-hardened-sku-23888124/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 20 teeth tooth width 80mm outside diameter 176mm teeth induction hardened SKU: 23888120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-20-teeth-tooth-width-80mm-outside-diameter-176mm-teeth-induction-hardened-sku-23888120/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 18 teeth tooth width 80mm outside diameter 160mm teeth induction hardened SKU: 23888118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-18-teeth-tooth-width-80mm-outside-diameter-160mm-teeth-induction-hardened-sku-23888118/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 16 teeth tooth width 80mm outside diameter 144mm teeth induction hardened SKU: 23888116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-16-teeth-tooth-width-80mm-outside-diameter-144mm-teeth-induction-hardened-sku-23888116/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 15 teeth tooth width 80mm outside diameter 136mm teeth induction hardened SKU: 23888115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-15-teeth-tooth-width-80mm-outside-diameter-136mm-teeth-induction-hardened-sku-23888115/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 14 teeth tooth width 80mm outside diameter 128mm teeth induction hardened SKU: 23888114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-14-teeth-tooth-width-80mm-outside-diameter-128mm-teeth-induction-hardened-sku-23888114/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 12 teeth tooth width 80mm outside diameter 112mm teeth induction hardened SKU: 23888112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-12-teeth-tooth-width-80mm-outside-diameter-112mm-teeth-induction-hardened-sku-23888112/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 40 teeth tooth width 65mm outside diameter 336mm SKU: 23804000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-40-teeth-tooth-width-65mm-outside-diameter-336mm-sku-23804000/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 36 teeth tooth width 65mm outside diameter 304mm SKU: 23803600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-36-teeth-tooth-width-65mm-outside-diameter-304mm-sku-23803600/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 32 teeth tooth width 65mm outside diameter 272mm SKU: 23803200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-32-teeth-tooth-width-65mm-outside-diameter-272mm-sku-23803200/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 30 teeth tooth width 65mm outside diameter 256mm SKU: 23803000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-30-teeth-tooth-width-65mm-outside-diameter-256mm-sku-23803000/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 25 teeth tooth width 65mm outside diameter 216mm SKU: 23802500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-25-teeth-tooth-width-65mm-outside-diameter-216mm-sku-23802500/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 24 teeth tooth width 65mm outside diameter 208mm SKU: 23802400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-24-teeth-tooth-width-65mm-outside-diameter-208mm-sku-23802400/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 20 teeth tooth width 65mm outside diameter 176mm SKU: 23802000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-20-teeth-tooth-width-65mm-outside-diameter-176mm-sku-23802000/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 18 teeth tooth width 65mm outside diameter 160mm SKU: 23801800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-18-teeth-tooth-width-65mm-outside-diameter-160mm-sku-23801800/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 16 teeth tooth width 65mm outside diameter 144mm SKU: 23801600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-16-teeth-tooth-width-65mm-outside-diameter-144mm-sku-23801600/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 15 teeth tooth width 65mm outside diameter 136mm SKU: 23801500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-15-teeth-tooth-width-65mm-outside-diameter-136mm-sku-23801500/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 14 teeth tooth width 65mm outside diameter 128mm SKU: 23801400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-14-teeth-tooth-width-65mm-outside-diameter-128mm-sku-23801400/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 12 teeth tooth width 65mm outside diameter 112mm SKU: 23801200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-12-teeth-tooth-width-65mm-outside-diameter-112mm-sku-23801200/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 36 teeth tooth width 60mm outside diameter 228mm teeth induction hardened SKU: 23688136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-36-teeth-tooth-width-60mm-outside-diameter-228mm-teeth-induction-hardened-sku-23688136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 30 teeth tooth width 60mm outside diameter 192mm teeth induction hardened SKU: 23688130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-30-teeth-tooth-width-60mm-outside-diameter-192mm-teeth-induction-hardened-sku-23688130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 25 teeth tooth width 60mm outside diameter 162mm teeth induction hardened SKU: 23688125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-25-teeth-tooth-width-60mm-outside-diameter-162mm-teeth-induction-hardened-sku-23688125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 24 teeth tooth width 60mm outside diameter 156mm teeth induction hardened SKU: 23688124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-24-teeth-tooth-width-60mm-outside-diameter-156mm-teeth-induction-hardened-sku-23688124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 22 teeth tooth width 60mm outside diameter 144mm teeth induction hardened SKU: 23688122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-22-teeth-tooth-width-60mm-outside-diameter-144mm-teeth-induction-hardened-sku-23688122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 20 teeth tooth width 60mm outside diameter 132mm teeth induction hardened SKU: 23688120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-20-teeth-tooth-width-60mm-outside-diameter-132mm-teeth-induction-hardened-sku-23688120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 18 teeth tooth width 60mm outside diameter 120mm teeth induction hardened SKU: 23688118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-18-teeth-tooth-width-60mm-outside-diameter-120mm-teeth-induction-hardened-sku-23688118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 16 teeth tooth width 60mm outside diameter 108mm teeth induction hardened SKU: 23688116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-16-teeth-tooth-width-60mm-outside-diameter-108mm-teeth-induction-hardened-sku-23688116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 15 teeth tooth width 60mm outside diameter 102mm teeth induction hardened SKU: 23688115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-15-teeth-tooth-width-60mm-outside-diameter-102mm-teeth-induction-hardened-sku-23688115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 14 teeth tooth width 60mm outside diameter 96mm teeth induction hardened SKU: 23688114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-14-teeth-tooth-width-60mm-outside-diameter-96mm-teeth-induction-hardened-sku-23688114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 12 teeth tooth width 60mm outside diameter 84mm teeth induction hardened SKU: 23688112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-12-teeth-tooth-width-60mm-outside-diameter-84mm-teeth-induction-hardened-sku-23688112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 36 teeth tooth width 50mm outside diameter 190mm teeth induction hardened SKU: 23588136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-36-teeth-tooth-width-50mm-outside-diameter-190mm-teeth-induction-hardened-sku-23588136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 32 teeth tooth width 50mm outside diameter 170mm teeth induction hardened SKU: 23588132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-32-teeth-tooth-width-50mm-outside-diameter-170mm-teeth-induction-hardened-sku-23588132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 30 teeth tooth width 50mm outside diameter 160mm teeth induction hardened SKU: 23588130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-30-teeth-tooth-width-50mm-outside-diameter-160mm-teeth-induction-hardened-sku-23588130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 25 teeth tooth width 50mm outside diameter 135mm teeth induction hardened SKU: 23588125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-25-teeth-tooth-width-50mm-outside-diameter-135mm-teeth-induction-hardened-sku-23588125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 24 teeth tooth width 50mm outside diameter 130mm teeth induction hardened SKU: 23588124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-24-teeth-tooth-width-50mm-outside-diameter-130mm-teeth-induction-hardened-sku-23588124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 22 teeth tooth width 50mm outside diameter 120mm teeth induction hardened SKU: 23588122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-22-teeth-tooth-width-50mm-outside-diameter-120mm-teeth-induction-hardened-sku-23588122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 20 teeth tooth width 50mm outside diameter 110mm teeth induction hardened SKU: 23588120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-20-teeth-tooth-width-50mm-outside-diameter-110mm-teeth-induction-hardened-sku-23588120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 18 teeth tooth width 50mm outside diameter 100mm teeth induction hardened SKU: 23588118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-18-teeth-tooth-width-50mm-outside-diameter-100mm-teeth-induction-hardened-sku-23588118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 16 teeth tooth width 50mm outside diameter 90mm teeth induction hardened SKU: 23588116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-16-teeth-tooth-width-50mm-outside-diameter-90mm-teeth-induction-hardened-sku-23588116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 15 teeth tooth width 50mm outside diameter 85mm teeth induction hardened SKU: 23588115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-15-teeth-tooth-width-50mm-outside-diameter-85mm-teeth-induction-hardened-sku-23588115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 14 teeth tooth width 50mm outside diameter 80mm teeth induction hardened SKU: 23588114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-14-teeth-tooth-width-50mm-outside-diameter-80mm-teeth-induction-hardened-sku-23588114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 12 teeth tooth width 50mm outside diameter 70mm teeth induction hardened SKU: 23588112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-12-teeth-tooth-width-50mm-outside-diameter-70mm-teeth-induction-hardened-sku-23588112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 30 teeth tooth width 40mm outside diameter 160mm SKU: 23503000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-30-teeth-tooth-width-40mm-outside-diameter-160mm-sku-23503000/): Werkstoff: Stahl St37, verzinkt. Diese elastische Lagerung für Elektromotoren kompensiert automatisch die Riemenlängung und die hohen Anlaufmomente. Sie isoliert Körperschall. Schwingungen des Riementriebes werden nicht in die Maschine geleitet. Über die Vorspanneinheit lässt sich die Riemenspannung komfortabel einstellen. Die Motorplatte und eine Positionierungsanleitung gehören zum Lieferumfang. Die Motorplatte ist montagefertig gebohrt für folgende Motorgrößen: 132S, 132M, 160M, 160L. - [Spur gear stainless steel 1.4305 with hub module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 23499260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-23499260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23499250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23499250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 48 teeth tooth width 40mm outside diameter 200mm SKU: 23499248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-48-teeth-tooth-width-40mm-outside-diameter-200mm-sku-23499248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 45 teeth tooth width 40mm outside diameter 188mm SKU: 23499245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-45-teeth-tooth-width-40mm-outside-diameter-188mm-sku-23499245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23499240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23499240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 35 teeth tooth width 40mm outside diameter 148mm SKU: 23499235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-35-teeth-tooth-width-40mm-outside-diameter-148mm-sku-23499235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23499230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23499230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23499225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23499225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23499224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23499224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23499220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23499220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 18 teeth tooth width 40mm outside diameter 80mm SKU: 23499218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-18-teeth-tooth-width-40mm-outside-diameter-80mm-sku-23499218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 16 teeth tooth width 40mm outside diameter 72mm SKU: 23499216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-sku-23499216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23499215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23499215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 14 teeth tooth width 40mm outside diameter 64mm SKU: 23499214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-14-teeth-tooth-width-40mm-outside-diameter-64mm-sku-23499214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 13 teeth tooth width 40mm outside diameter 60mm SKU: 23499213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-13-teeth-tooth-width-40mm-outside-diameter-60mm-sku-23499213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 12 teeth tooth width 40mm outside diameter 56mm SKU: 23499212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-sku-23499212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 60 teeth tooth width 30mm outside diameter 248mm SKU: 23499060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-60-teeth-tooth-width-30mm-outside-diameter-248mm-sku-23499060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 50 teeth tooth width 30mm outside diameter 208mm SKU: 23499050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-50-teeth-tooth-width-30mm-outside-diameter-208mm-sku-23499050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 48 teeth tooth width 30mm outside diameter 200mm SKU: 23499048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-48-teeth-tooth-width-30mm-outside-diameter-200mm-sku-23499048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 45 teeth tooth width 30mm outside diameter 188mm SKU: 23499045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-45-teeth-tooth-width-30mm-outside-diameter-188mm-sku-23499045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 40 teeth tooth width 30mm outside diameter 168mm SKU: 23499040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-40-teeth-tooth-width-30mm-outside-diameter-168mm-sku-23499040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 35 teeth tooth width 30mm outside diameter 148mm SKU: 23499035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-35-teeth-tooth-width-30mm-outside-diameter-148mm-sku-23499035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 18 teeth tooth width 2mm outside diameter 10mm SKU: 26101800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-18-teeth-tooth-width-2mm-outside-diameter-10mm-sku-26101800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 17 teeth tooth width 2mm outside diameter 9.5mm SKU: 26101700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-17-teeth-tooth-width-2mm-outside-diameter-9-5mm-sku-26101700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 16 teeth tooth width 2mm outside diameter 9mm SKU: 26101600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-16-teeth-tooth-width-2mm-outside-diameter-9mm-sku-26101600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 15 teeth tooth width 2mm outside diameter 8.5mm SKU: 26101500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-15-teeth-tooth-width-2mm-outside-diameter-8-5mm-sku-26101500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 14 teeth tooth width 2mm outside diameter 8mm SKU: 26101400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-14-teeth-tooth-width-2mm-outside-diameter-8mm-sku-26101400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 13 teeth tooth width 2mm outside diameter 7.5mm SKU: 26101300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-13-teeth-tooth-width-2mm-outside-diameter-7-5mm-sku-26101300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 12 teeth tooth width 2mm outside diameter 7mm SKU: 26101200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-12-teeth-tooth-width-2mm-outside-diameter-7mm-sku-26101200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 10 teeth tooth width 2mm outside diameter 6mm SKU: 26101000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-10-teeth-tooth-width-2mm-outside-diameter-6mm-sku-26101000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.3 120 teeth tooth width 2mm outside diameter 36.6mm SKU: 26012000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-120-teeth-tooth-width-2mm-outside-diameter-36-6mm-sku-26012000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 100 teeth tooth width 2mm outside diameter 30.6mm SKU: 26010000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-100-teeth-tooth-width-2mm-outside-diameter-30-6mm-sku-26010000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 80 teeth tooth width 2mm outside diameter 24.6mm SKU: 26008000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-80-teeth-tooth-width-2mm-outside-diameter-24-6mm-sku-26008000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 60 teeth tooth width 2mm outside diameter 18.6mm SKU: 26006000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-60-teeth-tooth-width-2mm-outside-diameter-18-6mm-sku-26006000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 50 teeth tooth width 2mm outside diameter 15.6mm SKU: 26005000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-50-teeth-tooth-width-2mm-outside-diameter-15-6mm-sku-26005000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 40 teeth tooth width 2mm outside diameter 12.6mm SKU: 26004000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-40-teeth-tooth-width-2mm-outside-diameter-12-6mm-sku-26004000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 30 teeth tooth width 5mm (full-length cut) outside diameter 9.6mm SKU: 26003000](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-30-teeth-tooth-width-5mm-full-length-cut-outside-diameter-9-6mm-sku-26003000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 25 teeth tooth width 5mm (full-length cut) outside diameter 8.1mm SKU: 26002500](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-25-teeth-tooth-width-5mm-full-length-cut-outside-diameter-8-1mm-sku-26002500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 24 teeth tooth width 5mm (full-length cut) outside diameter 7.8mm SKU: 26002400](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-24-teeth-tooth-width-5mm-full-length-cut-outside-diameter-7-8mm-sku-26002400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 22 teeth tooth width 5mm (full-length cut) outside diameter 7.2mm SKU: 26002200](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-22-teeth-tooth-width-5mm-full-length-cut-outside-diameter-7-2mm-sku-26002200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 20 teeth tooth width 5mm (full-length cut) outside diameter 6.6mm SKU: 26002000](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-20-teeth-tooth-width-5mm-full-length-cut-outside-diameter-6-6mm-sku-26002000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 18 teeth tooth width 5mm (full-length cut) outside diameter 6mm SKU: 26001800](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-18-teeth-tooth-width-5mm-full-length-cut-outside-diameter-6mm-sku-26001800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 16 teeth tooth width 5mm (full-length cut) outside diameter 5.4mm SKU: 26001600](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-16-teeth-tooth-width-5mm-full-length-cut-outside-diameter-5-4mm-sku-26001600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 15 teeth tooth width 5mm (full-length cut) outside diameter 5.1mm SKU: 26001500](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-15-teeth-tooth-width-5mm-full-length-cut-outside-diameter-5-1mm-sku-26001500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 14 teeth tooth width 5mm (full-length cut) outside diameter 4.8mm SKU: 26001400](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-14-teeth-tooth-width-5mm-full-length-cut-outside-diameter-4-8mm-sku-26001400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 12 teeth tooth width 5mm (full-length cut) outside diameter 4.2mm SKU: 26001200](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-12-teeth-tooth-width-5mm-full-length-cut-outside-diameter-4-2mm-sku-26001200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 10 teeth tooth width 5mm (full-length cut) outside diameter 3.6mm SKU: 26001000](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-10-teeth-tooth-width-5mm-full-length-cut-outside-diameter-3-6mm-sku-26001000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Precision gear rack made of bright steel 900N/mm² module 5 2000mm long with bores SKU: 25560911](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-2000mm-long-with-bores-sku-25560911/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 2000mm long without bores SKU: 25560910](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-2000mm-long-without-bores-sku-25560910/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 1000mm long with bores SKU: 25560511](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-1000mm-long-with-bores-sku-25560511/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 1000mm long without bores SKU: 25560510](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-1000mm-long-without-bores-sku-25560510/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 500mm long with bores SKU: 25560311](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-500mm-long-with-bores-sku-25560311/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 500mm long without bores SKU: 25560310](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-500mm-long-without-bores-sku-25560310/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 2000mm long with bores SKU: 25460911](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-2000mm-long-with-bores-sku-25460911/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 2000mm long without bores SKU: 25460910](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-2000mm-long-without-bores-sku-25460910/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 1000mm long with bores SKU: 25460511](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-1000mm-long-with-bores-sku-25460511/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 1000mm long without bores SKU: 25460510](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-1000mm-long-without-bores-sku-25460510/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5, module 4 1000mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25460501](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-4-1000mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25460501/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5, module 4 1000mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25460500](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-4-1000mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25460500/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 506.67mm long with bores SKU: 25460311](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-506-67mm-long-with-bores-sku-25460311/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 506.67mm long without bores SKU: 25460310](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-506-67mm-long-without-bores-sku-25460310/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 4 506.67mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25460301](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-4-506-67mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25460301/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 2000mm long with bores SKU: 25360911](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-2000mm-long-with-bores-sku-25360911/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 2000mm long without bores SKU: 25360910](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-2000mm-long-without-bores-sku-25360910/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 1000mm long with bores SKU: 25360511](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-1000mm-long-with-bores-sku-25360511/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 1000mm long without bores SKU: 25360510](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-1000mm-long-without-bores-sku-25360510/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 3 1000mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25360501](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-3-1000mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25360501/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 3 1000mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25360500](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-3-1000mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25360500/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 500mm long with bores SKU: 25360311](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-500mm-long-with-bores-sku-25360311/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 500mm long without bores SKU: 25360310](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-500mm-long-without-bores-sku-25360310/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 3 500mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25360301](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-3-500mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25360301/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 3 500mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25360300](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-3-500mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25360300/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 2000mm long with bores SKU: 25160911](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-2000mm-long-with-bores-sku-25160911/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 2000mm long without bores SKU: 25160910](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-2000mm-long-without-bores-sku-25160910/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 1000mm long with bores SKU: 25160511](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-1000mm-long-with-bores-sku-25160511/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 1000mm long without bores SKU: 25160510](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-1000mm-long-without-bores-sku-25160510/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of 16MnCr5 module 2 1000mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25160501](https://maedler.in/product/precision-gear-rack-made-of-16mncr5-module-2-1000mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25160501/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of 16MnCr5 module 2 1000mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25160500](https://maedler.in/product/precision-gear-rack-made-of-16mncr5-module-2-1000mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25160500/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 500mm long with bores SKU: 25160311](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-500mm-long-with-bores-sku-25160311/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 500mm long without bores SKU: 25160310](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-500mm-long-without-bores-sku-25160310/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 2 500mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25160301](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-2-500mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25160301/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 2 500mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25160300](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-2-500mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25160300/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision spur gear made of steel 16MnCr5 module 3 60 teeth bore 45mm hardened and ground outside diameter 186mm SKU: 24386045](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-60-teeth-bore-45mm-hardened-and-ground-outside-diameter-186mm-sku-24386045/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 60 teeth bore 35mm hardened and ground outside diameter 186mm SKU: 24386035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-60-teeth-bore-35mm-hardened-and-ground-outside-diameter-186mm-sku-24386035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 60 teeth bore 25mm hardened and ground outside diameter 186mm SKU: 24386000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-60-teeth-bore-25mm-hardened-and-ground-outside-diameter-186mm-sku-24386000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 50 teeth bore 45mm hardened and ground outside diameter 156mm SKU: 24385045](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-50-teeth-bore-45mm-hardened-and-ground-outside-diameter-156mm-sku-24385045/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 50 teeth bore 35mm hardened and ground outside diameter 156mm SKU: 24385035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-50-teeth-bore-35mm-hardened-and-ground-outside-diameter-156mm-sku-24385035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 50 teeth bore 20mm hardened and ground outside diameter 156mm SKU: 24385000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-50-teeth-bore-20mm-hardened-and-ground-outside-diameter-156mm-sku-24385000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 48 teeth bore 45mm hardened and ground outside diameter 150mm SKU: 24384845](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-48-teeth-bore-45mm-hardened-and-ground-outside-diameter-150mm-sku-24384845/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 48 teeth bore 35mm hardened and ground outside diameter 150mm SKU: 24384835](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-48-teeth-bore-35mm-hardened-and-ground-outside-diameter-150mm-sku-24384835/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 48 teeth bore 20mm hardened and ground outside diameter 150mm SKU: 24384800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-48-teeth-bore-20mm-hardened-and-ground-outside-diameter-150mm-sku-24384800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 40 teeth bore 40mm hardened and ground outside diameter 126mm SKU: 24384040](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-40-teeth-bore-40mm-hardened-and-ground-outside-diameter-126mm-sku-24384040/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 40 teeth bore 35mm hardened and ground outside diameter 126mm SKU: 24384035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-40-teeth-bore-35mm-hardened-and-ground-outside-diameter-126mm-sku-24384035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 40 teeth bore 20mm hardened and ground outside diameter 126mm SKU: 24384000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-40-teeth-bore-20mm-hardened-and-ground-outside-diameter-126mm-sku-24384000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 36 teeth bore 35mm hardened and ground outside diameter 114mm SKU: 24383635](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-36-teeth-bore-35mm-hardened-and-ground-outside-diameter-114mm-sku-24383635/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 36 teeth bore 30mm hardened and ground outside diameter 114mm SKU: 24383630](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-36-teeth-bore-30mm-hardened-and-ground-outside-diameter-114mm-sku-24383630/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 36 teeth bore 20mm hardened and ground outside diameter 114mm SKU: 24383600](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-36-teeth-bore-20mm-hardened-and-ground-outside-diameter-114mm-sku-24383600/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 30 teeth bore 35mm hardened and ground outside diameter 96mm SKU: 24383035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-30-teeth-bore-35mm-hardened-and-ground-outside-diameter-96mm-sku-24383035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 30 teeth bore 25mm hardened and ground outside diameter 96mm SKU: 24383025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-30-teeth-bore-25mm-hardened-and-ground-outside-diameter-96mm-sku-24383025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 30 teeth bore 20mm hardened and ground outside diameter 96mm SKU: 24383000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-30-teeth-bore-20mm-hardened-and-ground-outside-diameter-96mm-sku-24383000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 35mm hardened and ground outside diameter 81mm SKU: 24382535](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-35mm-hardened-and-ground-outside-diameter-81mm-sku-24382535/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 25mm hardened and ground outside diameter 81mm SKU: 24382500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-25mm-hardened-and-ground-outside-diameter-81mm-sku-24382500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 24 teeth bore 35mm hardened and ground outside diameter 78mm SKU: 24382435](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-24-teeth-bore-35mm-hardened-and-ground-outside-diameter-78mm-sku-24382435/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 24 teeth bore 25mm hardened and ground outside diameter 78mm SKU: 24382425](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-24-teeth-bore-25mm-hardened-and-ground-outside-diameter-78mm-sku-24382425/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 24 teeth bore 15mm hardened and ground outside diameter 78mm SKU: 24382400](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-24-teeth-bore-15mm-hardened-and-ground-outside-diameter-78mm-sku-24382400/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 25mm hardened and ground outside diameter 66mm SKU: 24382025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-25mm-hardened-and-ground-outside-diameter-66mm-sku-24382025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 15mm hardened and ground outside diameter 66mm SKU: 24382000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-15mm-hardened-and-ground-outside-diameter-66mm-sku-24382000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 18 teeth bore 20mm hardened and ground outside diameter 60mm SKU: 24381820](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-18-teeth-bore-20mm-hardened-and-ground-outside-diameter-60mm-sku-24381820/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 18 teeth bore 15mm hardened and ground outside diameter 60mm SKU: 24381800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-18-teeth-bore-15mm-hardened-and-ground-outside-diameter-60mm-sku-24381800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 15 teeth bore 20mm hardened and ground outside diameter 51mm SKU: 24381520](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-15-teeth-bore-20mm-hardened-and-ground-outside-diameter-51mm-sku-24381520/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 15 teeth bore 12mm hardened and ground outside diameter 51mm SKU: 24381500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-15-teeth-bore-12mm-hardened-and-ground-outside-diameter-51mm-sku-24381500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 12 teeth bore 15mm hardened and ground outside diameter 42mm SKU: 24381215](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-12-teeth-bore-15mm-hardened-and-ground-outside-diameter-42mm-sku-24381215/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 12 teeth bore 12mm hardened and ground outside diameter 42mm SKU: 24381200](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-12-teeth-bore-12mm-hardened-and-ground-outside-diameter-42mm-sku-24381200/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 60 teeth bore 35mm hardened and ground outside diameter 124mm SKU: 24186035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-60-teeth-bore-35mm-hardened-and-ground-outside-diameter-124mm-sku-24186035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 60 teeth bore 30mm hardened and ground outside diameter 124mm SKU: 24186030](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-60-teeth-bore-30mm-hardened-and-ground-outside-diameter-124mm-sku-24186030/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 60 teeth bore 20mm hardened and ground outside diameter 124mm SKU: 24186000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-60-teeth-bore-20mm-hardened-and-ground-outside-diameter-124mm-sku-24186000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 50 teeth bore 30mm hardened and ground outside diameter 104mm SKU: 24185030](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-50-teeth-bore-30mm-hardened-and-ground-outside-diameter-104mm-sku-24185030/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 50 teeth bore 25mm hardened and ground outside diameter 104mm SKU: 24185025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-50-teeth-bore-25mm-hardened-and-ground-outside-diameter-104mm-sku-24185025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 50 teeth bore 20mm hardened and ground outside diameter 104mm SKU: 24185000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-50-teeth-bore-20mm-hardened-and-ground-outside-diameter-104mm-sku-24185000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 48 teeth bore 25mm hardened and ground outside diameter 100mm SKU: 24184825](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-48-teeth-bore-25mm-hardened-and-ground-outside-diameter-100mm-sku-24184825/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 48 teeth bore 20mm hardened and ground outside diameter 100mm SKU: 24184820](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-48-teeth-bore-20mm-hardened-and-ground-outside-diameter-100mm-sku-24184820/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 48 teeth bore 15mm hardened and ground outside diameter 100mm SKU: 24184800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-48-teeth-bore-15mm-hardened-and-ground-outside-diameter-100mm-sku-24184800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Spur gear made of brass Ms58 with hub module 1 28 teeth tooth width 6.5mm outside diameter 30mm SKU: 26302800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-28-teeth-tooth-width-6-5mm-outside-diameter-30mm-sku-26302800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 27 teeth tooth width 6.5mm outside diameter 29mm SKU: 26302700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-27-teeth-tooth-width-6-5mm-outside-diameter-29mm-sku-26302700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 26 teeth tooth width 6.5mm outside diameter 28mm SKU: 26302600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-26-teeth-tooth-width-6-5mm-outside-diameter-28mm-sku-26302600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 25 teeth tooth width 6.5mm outside diameter 27mm SKU: 26302500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-25-teeth-tooth-width-6-5mm-outside-diameter-27mm-sku-26302500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 24 teeth tooth width 6.5mm outside diameter 26mm SKU: 26302400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-24-teeth-tooth-width-6-5mm-outside-diameter-26mm-sku-26302400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 23 teeth tooth width 6.5mm outside diameter 25mm SKU: 26302300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-23-teeth-tooth-width-6-5mm-outside-diameter-25mm-sku-26302300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 22 teeth tooth width 6.5mm outside diameter 24mm SKU: 26302200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-22-teeth-tooth-width-6-5mm-outside-diameter-24mm-sku-26302200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 21 teeth tooth width 6.5mm outside diameter 23mm SKU: 26302100](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-21-teeth-tooth-width-6-5mm-outside-diameter-23mm-sku-26302100/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 20 teeth tooth width 6.5mm outside diameter 22mm SKU: 26302000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-20-teeth-tooth-width-6-5mm-outside-diameter-22mm-sku-26302000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 19 teeth tooth width 6.5mm outside diameter 21mm SKU: 26301900](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-19-teeth-tooth-width-6-5mm-outside-diameter-21mm-sku-26301900/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 18 teeth tooth width 6.5mm outside diameter 20mm SKU: 26301800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-18-teeth-tooth-width-6-5mm-outside-diameter-20mm-sku-26301800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 17 teeth tooth width 6.5mm outside diameter 19mm SKU: 26301700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-17-teeth-tooth-width-6-5mm-outside-diameter-19mm-sku-26301700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 16 teeth tooth width 6.5mm outside diameter 18mm SKU: 26301600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-16-teeth-tooth-width-6-5mm-outside-diameter-18mm-sku-26301600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 15 teeth tooth width 6.5mm outside diameter 17mm SKU: 26301500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-15-teeth-tooth-width-6-5mm-outside-diameter-17mm-sku-26301500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 14 teeth tooth width 6.5mm outside diameter 16mm SKU: 26301400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-14-teeth-tooth-width-6-5mm-outside-diameter-16mm-sku-26301400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 13 teeth tooth width 6.5mm outside diameter 15mm SKU: 26301300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-13-teeth-tooth-width-6-5mm-outside-diameter-15mm-sku-26301300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 12 teeth tooth width 6.5mm outside diameter 14mm SKU: 26301200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-12-teeth-tooth-width-6-5mm-outside-diameter-14mm-sku-26301200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 10 teeth tooth width 6.5mm outside diameter 12mm SKU: 26301000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-10-teeth-tooth-width-6-5mm-outside-diameter-12mm-sku-26301000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 120 teeth tooth width 4mm outside diameter 85.4mm SKU: 26212000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-120-teeth-tooth-width-4mm-outside-diameter-85-4mm-sku-26212000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 114 teeth tooth width 4mm outside diameter 81.2mm SKU: 26211400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-114-teeth-tooth-width-4mm-outside-diameter-81-2mm-sku-26211400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 100 teeth tooth width 4mm outside diameter 71.4mm SKU: 26210000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-100-teeth-tooth-width-4mm-outside-diameter-71-4mm-sku-26210000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 96 teeth tooth width 4mm outside diameter 68.6mm SKU: 26209600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-96-teeth-tooth-width-4mm-outside-diameter-68-6mm-sku-26209600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 90 teeth tooth width 4mm outside diameter 64.4mm SKU: 26209000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-90-teeth-tooth-width-4mm-outside-diameter-64-4mm-sku-26209000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 85 teeth tooth width 4mm outside diameter 60.9mm SKU: 26208500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-85-teeth-tooth-width-4mm-outside-diameter-60-9mm-sku-26208500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 80 teeth tooth width 4mm outside diameter 57.4mm SKU: 26208000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-80-teeth-tooth-width-4mm-outside-diameter-57-4mm-sku-26208000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 75 teeth tooth width 4mm outside diameter 53.9mm SKU: 26207500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-75-teeth-tooth-width-4mm-outside-diameter-53-9mm-sku-26207500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 72 teeth tooth width 4mm outside diameter 51.8mm SKU: 26207200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-72-teeth-tooth-width-4mm-outside-diameter-51-8mm-sku-26207200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 70 teeth tooth width 4mm outside diameter 50.4mm SKU: 26207000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-70-teeth-tooth-width-4mm-outside-diameter-50-4mm-sku-26207000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 65 teeth tooth width 4mm outside diameter 46.9mm SKU: 26206500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-65-teeth-tooth-width-4mm-outside-diameter-46-9mm-sku-26206500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 64 teeth tooth width 4mm outside diameter 46.2mm SKU: 26206400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-64-teeth-tooth-width-4mm-outside-diameter-46-2mm-sku-26206400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 60 teeth tooth width 4mm outside diameter 43.4mm SKU: 26206000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-60-teeth-tooth-width-4mm-outside-diameter-43-4mm-sku-26206000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 56 teeth tooth width 4mm outside diameter 40.6mm SKU: 26205600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-56-teeth-tooth-width-4mm-outside-diameter-40-6mm-sku-26205600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 55 teeth tooth width 4mm outside diameter 39.9mm SKU: 26205500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-55-teeth-tooth-width-4mm-outside-diameter-39-9mm-sku-26205500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 54 teeth tooth width 4mm outside diameter 39.2mm SKU: 26205400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-54-teeth-tooth-width-4mm-outside-diameter-39-2mm-sku-26205400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 52 teeth tooth width 4mm outside diameter 37.8mm SKU: 26205200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-52-teeth-tooth-width-4mm-outside-diameter-37-8mm-sku-26205200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 50 teeth tooth width 4mm outside diameter 36.4mm SKU: 26205000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-50-teeth-tooth-width-4mm-outside-diameter-36-4mm-sku-26205000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 48 teeth tooth width 4mm outside diameter 35mm SKU: 26204800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-48-teeth-tooth-width-4mm-outside-diameter-35mm-sku-26204800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 45 teeth tooth width 4mm outside diameter 32.9mm SKU: 26204500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-45-teeth-tooth-width-4mm-outside-diameter-32-9mm-sku-26204500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 42 teeth tooth width 4mm outside diameter 30.8mm SKU: 26204200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-42-teeth-tooth-width-4mm-outside-diameter-30-8mm-sku-26204200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 40 teeth tooth width 4mm outside diameter 29.4mm SKU: 26204000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-40-teeth-tooth-width-4mm-outside-diameter-29-4mm-sku-26204000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 38 teeth tooth width 4mm outside diameter 28mm SKU: 26203800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-38-teeth-tooth-width-4mm-outside-diameter-28mm-sku-26203800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 36 teeth tooth width 4mm outside diameter 26.6mm SKU: 26203600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-36-teeth-tooth-width-4mm-outside-diameter-26-6mm-sku-26203600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 35 teeth tooth width 4mm outside diameter 25.9mm SKU: 26203500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-35-teeth-tooth-width-4mm-outside-diameter-25-9mm-sku-26203500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 32 teeth tooth width 4mm outside diameter 23.8mm SKU: 26203200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-32-teeth-tooth-width-4mm-outside-diameter-23-8mm-sku-26203200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 30 teeth tooth width 4mm outside diameter 22.4mm SKU: 26203000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-30-teeth-tooth-width-4mm-outside-diameter-22-4mm-sku-26203000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 28 teeth tooth width 4mm outside diameter 21mm SKU: 26202800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-28-teeth-tooth-width-4mm-outside-diameter-21mm-sku-26202800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 27 teeth tooth width 4mm outside diameter 20.3mm SKU: 26202700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-27-teeth-tooth-width-4mm-outside-diameter-20-3mm-sku-26202700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 26 teeth tooth width 4mm outside diameter 19.6mm SKU: 26202600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-26-teeth-tooth-width-4mm-outside-diameter-19-6mm-sku-26202600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 25 teeth tooth width 4mm outside diameter 18.9mm SKU: 26202500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-25-teeth-tooth-width-4mm-outside-diameter-18-9mm-sku-26202500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 24 teeth tooth width 4mm outside diameter 18.2mm SKU: 26202400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-24-teeth-tooth-width-4mm-outside-diameter-18-2mm-sku-26202400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 23 teeth tooth width 4mm outside diameter 17.5mm SKU: 26202300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-23-teeth-tooth-width-4mm-outside-diameter-17-5mm-sku-26202300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 22 teeth tooth width 4mm outside diameter 16.8mm SKU: 26202200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-22-teeth-tooth-width-4mm-outside-diameter-16-8mm-sku-26202200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 21 teeth tooth width 4mm outside diameter 16.1mm SKU: 26202100](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-21-teeth-tooth-width-4mm-outside-diameter-16-1mm-sku-26202100/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 20 teeth tooth width 4mm outside diameter 15.4mm SKU: 26202000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-20-teeth-tooth-width-4mm-outside-diameter-15-4mm-sku-26202000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 19 teeth tooth width 4mm outside diameter 14.7mm SKU: 26201900](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-19-teeth-tooth-width-4mm-outside-diameter-14-7mm-sku-26201900/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 18 teeth tooth width 4mm outside diameter 14mm SKU: 26201800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-18-teeth-tooth-width-4mm-outside-diameter-14mm-sku-26201800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 17 teeth tooth width 4mm outside diameter 13.3mm SKU: 26201700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-17-teeth-tooth-width-4mm-outside-diameter-13-3mm-sku-26201700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 16 teeth tooth width 4mm outside diameter 12.6mm SKU: 26201600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-16-teeth-tooth-width-4mm-outside-diameter-12-6mm-sku-26201600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 15 teeth tooth width 4mm outside diameter 11.9mm SKU: 26201500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-15-teeth-tooth-width-4mm-outside-diameter-11-9mm-sku-26201500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 14 teeth tooth width 4mm outside diameter 11.2mm SKU: 26201400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-14-teeth-tooth-width-4mm-outside-diameter-11-2mm-sku-26201400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 13 teeth tooth width 4mm outside diameter 10.5mm SKU: 26201300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-13-teeth-tooth-width-4mm-outside-diameter-10-5mm-sku-26201300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 12 teeth tooth width 4mm outside diameter 9.8mm SKU: 26201200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-12-teeth-tooth-width-4mm-outside-diameter-9-8mm-sku-26201200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 10 teeth tooth width 4mm outside diameter 8.4mm SKU: 26201000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-10-teeth-tooth-width-4mm-outside-diameter-8-4mm-sku-26201000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 120 teeth tooth width 2mm outside diameter 61mm SKU: 26112000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-120-teeth-tooth-width-2mm-outside-diameter-61mm-sku-26112000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 114 teeth tooth width 2mm outside diameter 58mm SKU: 26111400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-114-teeth-tooth-width-2mm-outside-diameter-58mm-sku-26111400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 100 teeth tooth width 2mm outside diameter 51mm SKU: 26110000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-100-teeth-tooth-width-2mm-outside-diameter-51mm-sku-26110000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 96 teeth tooth width 2mm outside diameter 49mm SKU: 26109600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-96-teeth-tooth-width-2mm-outside-diameter-49mm-sku-26109600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 90 teeth tooth width 2mm outside diameter 46mm SKU: 26109000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-90-teeth-tooth-width-2mm-outside-diameter-46mm-sku-26109000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 85 teeth tooth width 2mm outside diameter 43.5mm SKU: 26108500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-85-teeth-tooth-width-2mm-outside-diameter-43-5mm-sku-26108500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 80 teeth tooth width 2mm outside diameter 41mm SKU: 26108000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-80-teeth-tooth-width-2mm-outside-diameter-41mm-sku-26108000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 75 teeth tooth width 2mm outside diameter 38.5mm SKU: 26107500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-75-teeth-tooth-width-2mm-outside-diameter-38-5mm-sku-26107500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 72 teeth tooth width 2mm outside diameter 37mm SKU: 26107200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-72-teeth-tooth-width-2mm-outside-diameter-37mm-sku-26107200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 70 teeth tooth width 2mm outside diameter 36mm SKU: 26107000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-70-teeth-tooth-width-2mm-outside-diameter-36mm-sku-26107000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 65 teeth tooth width 2mm outside diameter 33.5mm SKU: 26106500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-65-teeth-tooth-width-2mm-outside-diameter-33-5mm-sku-26106500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 64 teeth tooth width 2mm outside diameter 33mm SKU: 26106400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-64-teeth-tooth-width-2mm-outside-diameter-33mm-sku-26106400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 60 teeth tooth width 2mm outside diameter 31mm SKU: 26106000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-60-teeth-tooth-width-2mm-outside-diameter-31mm-sku-26106000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 56 teeth tooth width 2mm outside diameter 29mm SKU: 26105600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-56-teeth-tooth-width-2mm-outside-diameter-29mm-sku-26105600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 55 teeth tooth width 2mm outside diameter 28.5mm SKU: 26105500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-55-teeth-tooth-width-2mm-outside-diameter-28-5mm-sku-26105500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 54 teeth tooth width 2mm outside diameter 28mm SKU: 26105400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-54-teeth-tooth-width-2mm-outside-diameter-28mm-sku-26105400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 52 teeth tooth width 2mm outside diameter 27mm SKU: 26105200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-52-teeth-tooth-width-2mm-outside-diameter-27mm-sku-26105200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 50 teeth tooth width 2mm outside diameter 26mm SKU: 26105000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-50-teeth-tooth-width-2mm-outside-diameter-26mm-sku-26105000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 48 teeth tooth width 2mm outside diameter 25mm SKU: 26104800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-48-teeth-tooth-width-2mm-outside-diameter-25mm-sku-26104800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 45 teeth tooth width 2mm outside diameter 23.5mm SKU: 26104500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-45-teeth-tooth-width-2mm-outside-diameter-23-5mm-sku-26104500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 42 teeth tooth width 2mm outside diameter 22mm SKU: 26104200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-42-teeth-tooth-width-2mm-outside-diameter-22mm-sku-26104200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 40 teeth tooth width 2mm outside diameter 21mm SKU: 26104000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-40-teeth-tooth-width-2mm-outside-diameter-21mm-sku-26104000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 38 teeth tooth width 2mm outside diameter 20mm SKU: 26103800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-38-teeth-tooth-width-2mm-outside-diameter-20mm-sku-26103800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 36 teeth tooth width 2mm outside diameter 19mm SKU: 26103600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-36-teeth-tooth-width-2mm-outside-diameter-19mm-sku-26103600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 35 teeth tooth width 2mm outside diameter 18.5mm SKU: 26103500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-35-teeth-tooth-width-2mm-outside-diameter-18-5mm-sku-26103500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 32 teeth tooth width 2mm outside diameter 17mm SKU: 26103200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-32-teeth-tooth-width-2mm-outside-diameter-17mm-sku-26103200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 30 teeth tooth width 2mm outside diameter 16mm SKU: 26103000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-30-teeth-tooth-width-2mm-outside-diameter-16mm-sku-26103000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 28 teeth tooth width 2mm outside diameter 15mm SKU: 26102800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-28-teeth-tooth-width-2mm-outside-diameter-15mm-sku-26102800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 27 teeth tooth width 2mm outside diameter 14.5mm SKU: 26102700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-27-teeth-tooth-width-2mm-outside-diameter-14-5mm-sku-26102700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 26 teeth tooth width 2mm outside diameter 14mm SKU: 26102600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-26-teeth-tooth-width-2mm-outside-diameter-14mm-sku-26102600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 25 teeth tooth width 2mm outside diameter 13.5mm SKU: 26102500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-25-teeth-tooth-width-2mm-outside-diameter-13-5mm-sku-26102500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 24 teeth tooth width 2mm outside diameter 13mm SKU: 26102400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-24-teeth-tooth-width-2mm-outside-diameter-13mm-sku-26102400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 23 teeth tooth width 2mm outside diameter 12.5mm SKU: 26102300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-23-teeth-tooth-width-2mm-outside-diameter-12-5mm-sku-26102300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 22 teeth tooth width 2mm outside diameter 12mm SKU: 26102200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-22-teeth-tooth-width-2mm-outside-diameter-12mm-sku-26102200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 21 teeth tooth width 2mm outside diameter 11.5mm SKU: 26102100](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-21-teeth-tooth-width-2mm-outside-diameter-11-5mm-sku-26102100/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 20 teeth tooth width 2mm outside diameter 11mm SKU: 26102000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-20-teeth-tooth-width-2mm-outside-diameter-11mm-sku-26102000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 19 teeth tooth width 2mm outside diameter 10.5mm SKU: 26101900](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-19-teeth-tooth-width-2mm-outside-diameter-10-5mm-sku-26101900/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of polyketone die-cast with hub module 0.5 75 teeth tooth width 3mm outside diameter 38,5mm SKU: 28107501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-75-teeth-tooth-width-3mm-outside-diameter-385mm-sku-28107501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 75 teeth tooth width 3mm outside diameter 38.5mm SKU: 28107500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-75-teeth-tooth-width-3mm-outside-diameter-38-5mm-sku-28107500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 72 teeth tooth width 3mm outside diameter 37mm SKU: 28107201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-72-teeth-tooth-width-3mm-outside-diameter-37mm-sku-28107201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 72 teeth tooth width 3mm outside diameter 37mm SKU: 28107200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-72-teeth-tooth-width-3mm-outside-diameter-37mm-sku-28107200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 70 teeth tooth width 3mm outside diameter 36mm SKU: 28107001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-70-teeth-tooth-width-3mm-outside-diameter-36mm-sku-28107001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 70 teeth tooth width 3mm outside diameter 36mm SKU: 28107000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-70-teeth-tooth-width-3mm-outside-diameter-36mm-sku-28107000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 65 teeth tooth width 3mm outside diameter 33,5mm SKU: 28106501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-65-teeth-tooth-width-3mm-outside-diameter-335mm-sku-28106501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 65 teeth tooth width 3mm outside diameter 33.5mm SKU: 28106500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-65-teeth-tooth-width-3mm-outside-diameter-33-5mm-sku-28106500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 64 teeth tooth width 3mm outside diameter 33mm SKU: 28106401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-64-teeth-tooth-width-3mm-outside-diameter-33mm-sku-28106401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 64 teeth tooth width 3mm outside diameter 33mm SKU: 28106400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-64-teeth-tooth-width-3mm-outside-diameter-33mm-sku-28106400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 60 teeth tooth width 3mm outside diameter 31mm SKU: 28106001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-60-teeth-tooth-width-3mm-outside-diameter-31mm-sku-28106001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 60 teeth tooth width 3mm outside diameter 31mm SKU: 28106000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-60-teeth-tooth-width-3mm-outside-diameter-31mm-sku-28106000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 56 teeth tooth width 3mm outside diameter 29mm SKU: 28105601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-56-teeth-tooth-width-3mm-outside-diameter-29mm-sku-28105601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 56 teeth tooth width 3mm outside diameter 29mm SKU: 28105600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-56-teeth-tooth-width-3mm-outside-diameter-29mm-sku-28105600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 55 teeth tooth width 3mm outside diameter 28,5mm SKU: 28105501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-55-teeth-tooth-width-3mm-outside-diameter-285mm-sku-28105501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 55 teeth tooth width 3mm outside diameter 28.5mm SKU: 28105500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-55-teeth-tooth-width-3mm-outside-diameter-28-5mm-sku-28105500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 54 teeth tooth width 3mm outside diameter 28mm SKU: 28105401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-54-teeth-tooth-width-3mm-outside-diameter-28mm-sku-28105401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 54 teeth tooth width 3mm outside diameter 28mm SKU: 28105400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-54-teeth-tooth-width-3mm-outside-diameter-28mm-sku-28105400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 52 teeth tooth width 3mm outside diameter 27mm SKU: 28105201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-52-teeth-tooth-width-3mm-outside-diameter-27mm-sku-28105201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 52 teeth tooth width 3mm outside diameter 27mm SKU: 28105200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-52-teeth-tooth-width-3mm-outside-diameter-27mm-sku-28105200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 50 teeth tooth width 3mm outside diameter 26mm SKU: 28105001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-50-teeth-tooth-width-3mm-outside-diameter-26mm-sku-28105001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 50 teeth tooth width 3mm outside diameter 26mm SKU: 28105000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-50-teeth-tooth-width-3mm-outside-diameter-26mm-sku-28105000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 48 teeth tooth width 3mm outside diameter 25mm SKU: 28104801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-48-teeth-tooth-width-3mm-outside-diameter-25mm-sku-28104801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 48 teeth tooth width 3mm outside diameter 25mm SKU: 28104800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-48-teeth-tooth-width-3mm-outside-diameter-25mm-sku-28104800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 45 teeth tooth width 3mm outside diameter 23,5mm SKU: 28104501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-45-teeth-tooth-width-3mm-outside-diameter-235mm-sku-28104501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 45 teeth tooth width 3mm outside diameter 23.5mm SKU: 28104500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-45-teeth-tooth-width-3mm-outside-diameter-23-5mm-sku-28104500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 42 teeth tooth width 3mm outside diameter 22mm SKU: 28104201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-42-teeth-tooth-width-3mm-outside-diameter-22mm-sku-28104201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 42 teeth tooth width 3mm outside diameter 22mm SKU: 28104200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-42-teeth-tooth-width-3mm-outside-diameter-22mm-sku-28104200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 40 teeth tooth width 3mm outside diameter 21mm SKU: 28104001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-40-teeth-tooth-width-3mm-outside-diameter-21mm-sku-28104001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 40 teeth tooth width 3mm outside diameter 21mm SKU: 28104000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-40-teeth-tooth-width-3mm-outside-diameter-21mm-sku-28104000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 38 teeth tooth width 3mm outside diameter 20mm SKU: 28103801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-38-teeth-tooth-width-3mm-outside-diameter-20mm-sku-28103801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 38 teeth tooth width 3mm outside diameter 20mm SKU: 28103800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-38-teeth-tooth-width-3mm-outside-diameter-20mm-sku-28103800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 36 teeth tooth width 3mm outside diameter 19mm SKU: 28103601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-36-teeth-tooth-width-3mm-outside-diameter-19mm-sku-28103601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 36 teeth tooth width 3mm outside diameter 19mm SKU: 28103600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-36-teeth-tooth-width-3mm-outside-diameter-19mm-sku-28103600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 35 teeth tooth width 3mm outside diameter 18,5mm SKU: 28103501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-35-teeth-tooth-width-3mm-outside-diameter-185mm-sku-28103501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 35 teeth tooth width 3mm outside diameter 18.5mm SKU: 28103500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-35-teeth-tooth-width-3mm-outside-diameter-18-5mm-sku-28103500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 32 teeth tooth width 3mm outside diameter 17mm SKU: 28103201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-32-teeth-tooth-width-3mm-outside-diameter-17mm-sku-28103201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 32 teeth tooth width 3mm outside diameter 17mm SKU: 28103200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-32-teeth-tooth-width-3mm-outside-diameter-17mm-sku-28103200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 30 teeth tooth width 3mm outside diameter 16mm SKU: 28103001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-30-teeth-tooth-width-3mm-outside-diameter-16mm-sku-28103001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 30 teeth tooth width 3mm outside diameter 16mm SKU: 28103000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-30-teeth-tooth-width-3mm-outside-diameter-16mm-sku-28103000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 28 teeth tooth width 3mm outside diameter 15mm SKU: 28102801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-28-teeth-tooth-width-3mm-outside-diameter-15mm-sku-28102801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 28 teeth tooth width 3mm outside diameter 15mm SKU: 28102800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-28-teeth-tooth-width-3mm-outside-diameter-15mm-sku-28102800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 27 teeth tooth width 3mm outside diameter 14,5mm SKU: 28102701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-27-teeth-tooth-width-3mm-outside-diameter-145mm-sku-28102701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 27 teeth tooth width 3mm outside diameter 14.5mm SKU: 28102700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-27-teeth-tooth-width-3mm-outside-diameter-14-5mm-sku-28102700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 26 teeth tooth width 3mm outside diameter 14mm SKU: 28102601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-26-teeth-tooth-width-3mm-outside-diameter-14mm-sku-28102601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 26 teeth tooth width 3mm outside diameter 14mm SKU: 28102600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-26-teeth-tooth-width-3mm-outside-diameter-14mm-sku-28102600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 25 teeth tooth width 3mm outside diameter 13,5mm SKU: 28102501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-25-teeth-tooth-width-3mm-outside-diameter-135mm-sku-28102501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 25 teeth tooth width 3mm outside diameter 13.5mm SKU: 28102500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-25-teeth-tooth-width-3mm-outside-diameter-13-5mm-sku-28102500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 24 teeth tooth width 3mm outside diameter 13mm SKU: 28102401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-24-teeth-tooth-width-3mm-outside-diameter-13mm-sku-28102401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 24 teeth tooth width 3mm outside diameter 13mm SKU: 28102400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-24-teeth-tooth-width-3mm-outside-diameter-13mm-sku-28102400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 23 teeth tooth width 3mm outside diameter 12,5mm SKU: 28102301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-23-teeth-tooth-width-3mm-outside-diameter-125mm-sku-28102301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 23 teeth tooth width 3mm outside diameter 12.5mm SKU: 28102300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-23-teeth-tooth-width-3mm-outside-diameter-12-5mm-sku-28102300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 22 teeth tooth width 3mm outside diameter 12mm SKU: 28102201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-22-teeth-tooth-width-3mm-outside-diameter-12mm-sku-28102201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 22 teeth tooth width 3mm outside diameter 12mm SKU: 28102200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-22-teeth-tooth-width-3mm-outside-diameter-12mm-sku-28102200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 21 teeth tooth width 3mm outside diameter 11,5mm SKU: 28102101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-21-teeth-tooth-width-3mm-outside-diameter-115mm-sku-28102101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 21 teeth tooth width 3mm outside diameter 11.5mm SKU: 28102100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-21-teeth-tooth-width-3mm-outside-diameter-11-5mm-sku-28102100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 20 teeth tooth width 3mm outside diameter 11mm SKU: 28102001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-20-teeth-tooth-width-3mm-outside-diameter-11mm-sku-28102001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 20 teeth tooth width 3mm outside diameter 11mm SKU: 28102000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-20-teeth-tooth-width-3mm-outside-diameter-11mm-sku-28102000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 19 teeth tooth width 3mm outside diameter 10,5mm SKU: 28101901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-19-teeth-tooth-width-3mm-outside-diameter-105mm-sku-28101901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 19 teeth tooth width 3mm outside diameter 10.5mm SKU: 28101900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-19-teeth-tooth-width-3mm-outside-diameter-10-5mm-sku-28101900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 18 teeth tooth width 3mm outside diameter 10mm SKU: 28101801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-18-teeth-tooth-width-3mm-outside-diameter-10mm-sku-28101801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 18 teeth tooth width 3mm outside diameter 10mm SKU: 28101800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-18-teeth-tooth-width-3mm-outside-diameter-10mm-sku-28101800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 17 teeth tooth width 3mm outside diameter 9,5mm SKU: 28101701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-17-teeth-tooth-width-3mm-outside-diameter-95mm-sku-28101701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 17 teeth tooth width 3mm outside diameter 9.5mm SKU: 28101700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-17-teeth-tooth-width-3mm-outside-diameter-9-5mm-sku-28101700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 16 teeth tooth width 3mm outside diameter 9mm SKU: 28101601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-16-teeth-tooth-width-3mm-outside-diameter-9mm-sku-28101601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 16 teeth tooth width 3mm outside diameter 9mm SKU: 28101600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-16-teeth-tooth-width-3mm-outside-diameter-9mm-sku-28101600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 15 teeth tooth width 3mm outside diameter 8,5mm SKU: 28101501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-15-teeth-tooth-width-3mm-outside-diameter-85mm-sku-28101501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 15 teeth tooth width 3mm outside diameter 8.5mm SKU: 28101500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-15-teeth-tooth-width-3mm-outside-diameter-8-5mm-sku-28101500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 14 teeth tooth width 3mm outside diameter 8mm SKU: 28101401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-14-teeth-tooth-width-3mm-outside-diameter-8mm-sku-28101401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 14 teeth tooth width 3mm outside diameter 8mm SKU: 28101400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-14-teeth-tooth-width-3mm-outside-diameter-8mm-sku-28101400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 13 teeth tooth width 3mm outside diameter 7,5mm SKU: 28101301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-13-teeth-tooth-width-3mm-outside-diameter-75mm-sku-28101301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 13 teeth tooth width 3mm outside diameter 7.5mm SKU: 28101300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-13-teeth-tooth-width-3mm-outside-diameter-7-5mm-sku-28101300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 12 teeth tooth width 3mm outside diameter 7mm SKU: 28101201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-12-teeth-tooth-width-3mm-outside-diameter-7mm-sku-28101201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 12 teeth tooth width 3mm outside diameter 7mm SKU: 28101200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-12-teeth-tooth-width-3mm-outside-diameter-7mm-sku-28101200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of brass Ms58 with hub module 1 120 teeth tooth width 6.5mm outside diameter 122mm SKU: 26312000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-120-teeth-tooth-width-6-5mm-outside-diameter-122mm-sku-26312000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 100 teeth tooth width 6.5mm outside diameter 102mm SKU: 26310000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-100-teeth-tooth-width-6-5mm-outside-diameter-102mm-sku-26310000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 96 teeth tooth width 6.5mm outside diameter 98mm SKU: 26309600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-96-teeth-tooth-width-6-5mm-outside-diameter-98mm-sku-26309600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 90 teeth tooth width 6.5mm outside diameter 92mm SKU: 26309000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-90-teeth-tooth-width-6-5mm-outside-diameter-92mm-sku-26309000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 85 teeth tooth width 6.5mm outside diameter 87mm SKU: 26308500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-85-teeth-tooth-width-6-5mm-outside-diameter-87mm-sku-26308500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 80 teeth tooth width 6.5mm outside diameter 82mm SKU: 26308000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-80-teeth-tooth-width-6-5mm-outside-diameter-82mm-sku-26308000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 75 teeth tooth width 6.5mm outside diameter 77mm SKU: 26307500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-75-teeth-tooth-width-6-5mm-outside-diameter-77mm-sku-26307500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 72 teeth tooth width 6.5mm outside diameter 74mm SKU: 26307200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-72-teeth-tooth-width-6-5mm-outside-diameter-74mm-sku-26307200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 70 teeth tooth width 6.5mm outside diameter 72mm SKU: 26307000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-70-teeth-tooth-width-6-5mm-outside-diameter-72mm-sku-26307000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 65 teeth tooth width 6.5mm outside diameter 67mm SKU: 26306500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-65-teeth-tooth-width-6-5mm-outside-diameter-67mm-sku-26306500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 64 teeth tooth width 6.5mm outside diameter 66mm SKU: 26306400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-64-teeth-tooth-width-6-5mm-outside-diameter-66mm-sku-26306400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 60 teeth tooth width 6.5mm outside diameter 62mm SKU: 26306000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-60-teeth-tooth-width-6-5mm-outside-diameter-62mm-sku-26306000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 56 teeth tooth width 6.5mm outside diameter 58mm SKU: 26305600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-56-teeth-tooth-width-6-5mm-outside-diameter-58mm-sku-26305600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 55 teeth tooth width 6.5mm outside diameter 57mm SKU: 26305500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-55-teeth-tooth-width-6-5mm-outside-diameter-57mm-sku-26305500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 54 teeth tooth width 6.5mm outside diameter 56mm SKU: 26305400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-54-teeth-tooth-width-6-5mm-outside-diameter-56mm-sku-26305400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 52 teeth tooth width 6.5mm outside diameter 54mm SKU: 26305200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-52-teeth-tooth-width-6-5mm-outside-diameter-54mm-sku-26305200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 50 teeth tooth width 6.5mm outside diameter 52mm SKU: 26305000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-50-teeth-tooth-width-6-5mm-outside-diameter-52mm-sku-26305000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 48 teeth tooth width 6.5mm outside diameter 50mm SKU: 26304800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-48-teeth-tooth-width-6-5mm-outside-diameter-50mm-sku-26304800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 45 teeth tooth width 6.5mm outside diameter 47mm SKU: 26304500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-45-teeth-tooth-width-6-5mm-outside-diameter-47mm-sku-26304500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 42 teeth tooth width 6.5mm outside diameter 44mm SKU: 26304200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-42-teeth-tooth-width-6-5mm-outside-diameter-44mm-sku-26304200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 40 teeth tooth width 6.5mm outside diameter 42mm SKU: 26304000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-40-teeth-tooth-width-6-5mm-outside-diameter-42mm-sku-26304000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 38 teeth tooth width 6.5mm outside diameter 40mm SKU: 26303800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-38-teeth-tooth-width-6-5mm-outside-diameter-40mm-sku-26303800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 36 teeth tooth width 6.5mm outside diameter 38mm SKU: 26303600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-36-teeth-tooth-width-6-5mm-outside-diameter-38mm-sku-26303600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 35 teeth tooth width 6.5mm outside diameter 37mm SKU: 26303500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-35-teeth-tooth-width-6-5mm-outside-diameter-37mm-sku-26303500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 32 teeth tooth width 6.5mm outside diameter 34mm SKU: 26303200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-32-teeth-tooth-width-6-5mm-outside-diameter-34mm-sku-26303200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 30 teeth tooth width 6.5mm outside diameter 32mm SKU: 26303000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-30-teeth-tooth-width-6-5mm-outside-diameter-32mm-sku-26303000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of polyketone die-cast with hub module 1 14 teeth tooth width 9mm outside diameter 16mm SKU: 28301401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-14-teeth-tooth-width-9mm-outside-diameter-16mm-sku-28301401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 14 teeth tooth width 9mm outside diameter 16mm SKU: 28301400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-14-teeth-tooth-width-9mm-outside-diameter-16mm-sku-28301400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 13 teeth tooth width 9mm outside diameter 15mm SKU: 28301301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-13-teeth-tooth-width-9mm-outside-diameter-15mm-sku-28301301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 13 teeth tooth width 9mm outside diameter 15mm SKU: 28301300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-13-teeth-tooth-width-9mm-outside-diameter-15mm-sku-28301300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 12 teeth tooth width 9mm outside diameter 14mm SKU: 28301201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-12-teeth-tooth-width-9mm-outside-diameter-14mm-sku-28301201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 12 teeth tooth width 9mm outside diameter 14mm SKU: 28301200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-12-teeth-tooth-width-9mm-outside-diameter-14mm-sku-28301200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 120 teeth tooth width 6mm outside diameter 85,4mm SKU: 28212001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-120-teeth-tooth-width-6mm-outside-diameter-854mm-sku-28212001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 120 teeth tooth width 6mm outside diameter 85.4mm SKU: 28212000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-120-teeth-tooth-width-6mm-outside-diameter-85-4mm-sku-28212000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 100 teeth tooth width 6mm outside diameter 71,4mm SKU: 28210001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-100-teeth-tooth-width-6mm-outside-diameter-714mm-sku-28210001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 100 teeth tooth width 6mm outside diameter 71.4mm SKU: 28210000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-100-teeth-tooth-width-6mm-outside-diameter-71-4mm-sku-28210000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 96 teeth tooth width 6mm outside diameter 68,6mm SKU: 28209601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-96-teeth-tooth-width-6mm-outside-diameter-686mm-sku-28209601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 96 teeth tooth width 6mm outside diameter 68.6mm SKU: 28209600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-96-teeth-tooth-width-6mm-outside-diameter-68-6mm-sku-28209600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 90 teeth tooth width 6mm outside diameter 64,4mm SKU: 28209001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-90-teeth-tooth-width-6mm-outside-diameter-644mm-sku-28209001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 90 teeth tooth width 6mm outside diameter 64.4mm SKU: 28209000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-90-teeth-tooth-width-6mm-outside-diameter-64-4mm-sku-28209000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 80 teeth tooth width 6mm outside diameter 57,4mm SKU: 28208001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-80-teeth-tooth-width-6mm-outside-diameter-574mm-sku-28208001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 80 teeth tooth width 6mm outside diameter 57.4mm SKU: 28208000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-80-teeth-tooth-width-6mm-outside-diameter-57-4mm-sku-28208000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 75 teeth tooth width 6mm outside diameter 53,9mm SKU: 28207501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-75-teeth-tooth-width-6mm-outside-diameter-539mm-sku-28207501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 75 teeth tooth width 6mm outside diameter 53.9mm SKU: 28207500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-75-teeth-tooth-width-6mm-outside-diameter-53-9mm-sku-28207500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 72 teeth tooth width 6mm outside diameter 51,8mm SKU: 28207201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-72-teeth-tooth-width-6mm-outside-diameter-518mm-sku-28207201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 72 teeth tooth width 6mm outside diameter 51.8mm SKU: 28207200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-72-teeth-tooth-width-6mm-outside-diameter-51-8mm-sku-28207200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 70 teeth tooth width 6mm outside diameter 50,4mm SKU: 28207001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-70-teeth-tooth-width-6mm-outside-diameter-504mm-sku-28207001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 70 teeth tooth width 6mm outside diameter 50.4mm SKU: 28207000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-70-teeth-tooth-width-6mm-outside-diameter-50-4mm-sku-28207000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 65 teeth tooth width 6mm outside diameter 46,9mm SKU: 28206501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-65-teeth-tooth-width-6mm-outside-diameter-469mm-sku-28206501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 65 teeth tooth width 6mm outside diameter 46.9mm SKU: 28206500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-65-teeth-tooth-width-6mm-outside-diameter-46-9mm-sku-28206500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 64 teeth tooth width 6mm outside diameter 46,2mm SKU: 28206401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-64-teeth-tooth-width-6mm-outside-diameter-462mm-sku-28206401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 64 teeth tooth width 6mm outside diameter 46.2mm SKU: 28206400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-64-teeth-tooth-width-6mm-outside-diameter-46-2mm-sku-28206400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 60 teeth tooth width 6mm outside diameter 43,4mm SKU: 28206001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-60-teeth-tooth-width-6mm-outside-diameter-434mm-sku-28206001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 60 teeth tooth width 6mm outside diameter 43.4mm SKU: 28206000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-60-teeth-tooth-width-6mm-outside-diameter-43-4mm-sku-28206000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 56 teeth tooth width 6mm outside diameter 40,6mm SKU: 28205601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-56-teeth-tooth-width-6mm-outside-diameter-406mm-sku-28205601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 56 teeth tooth width 6mm outside diameter 40.6mm SKU: 28205600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-56-teeth-tooth-width-6mm-outside-diameter-40-6mm-sku-28205600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 55 teeth tooth width 6mm outside diameter 39,9mm SKU: 28205501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-55-teeth-tooth-width-6mm-outside-diameter-399mm-sku-28205501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 55 teeth tooth width 6mm outside diameter 39.9mm SKU: 28205500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-55-teeth-tooth-width-6mm-outside-diameter-39-9mm-sku-28205500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 54 teeth tooth width 6mm outside diameter 39,2mm SKU: 28205401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-54-teeth-tooth-width-6mm-outside-diameter-392mm-sku-28205401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 54 teeth tooth width 6mm outside diameter 39.2mm SKU: 28205400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-54-teeth-tooth-width-6mm-outside-diameter-39-2mm-sku-28205400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 52 teeth tooth width 6mm outside diameter 37,8mm SKU: 28205201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-52-teeth-tooth-width-6mm-outside-diameter-378mm-sku-28205201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 52 teeth tooth width 6mm outside diameter 37.8mm SKU: 28205200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-52-teeth-tooth-width-6mm-outside-diameter-37-8mm-sku-28205200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 50 teeth tooth width 6mm outside diameter 36,4mm SKU: 28205001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-50-teeth-tooth-width-6mm-outside-diameter-364mm-sku-28205001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 50 teeth tooth width 6mm outside diameter 36.4mm SKU: 28205000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-50-teeth-tooth-width-6mm-outside-diameter-36-4mm-sku-28205000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 48 teeth tooth width 6mm outside diameter 35mm SKU: 28204801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-48-teeth-tooth-width-6mm-outside-diameter-35mm-sku-28204801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 48 teeth tooth width 6mm outside diameter 35mm SKU: 28204800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-48-teeth-tooth-width-6mm-outside-diameter-35mm-sku-28204800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 45 teeth tooth width 6mm outside diameter 32,9mm SKU: 28204501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-45-teeth-tooth-width-6mm-outside-diameter-329mm-sku-28204501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 45 teeth tooth width 6mm outside diameter 32.9mm SKU: 28204500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-45-teeth-tooth-width-6mm-outside-diameter-32-9mm-sku-28204500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 42 teeth tooth width 6mm outside diameter 30,8mm SKU: 28204201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-42-teeth-tooth-width-6mm-outside-diameter-308mm-sku-28204201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 42 teeth tooth width 6mm outside diameter 30.8mm SKU: 28204200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-42-teeth-tooth-width-6mm-outside-diameter-30-8mm-sku-28204200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 40 teeth tooth width 6mm outside diameter 29,4mm SKU: 28204001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-40-teeth-tooth-width-6mm-outside-diameter-294mm-sku-28204001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 40 teeth tooth width 6mm outside diameter 29.4mm SKU: 28204000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-40-teeth-tooth-width-6mm-outside-diameter-29-4mm-sku-28204000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 38 teeth tooth width 6mm outside diameter 28mm SKU: 28203801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-38-teeth-tooth-width-6mm-outside-diameter-28mm-sku-28203801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 38 teeth tooth width 6mm outside diameter 28mm SKU: 28203800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-38-teeth-tooth-width-6mm-outside-diameter-28mm-sku-28203800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 36 teeth tooth width 6mm outside diameter 26,6mm SKU: 28203601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-36-teeth-tooth-width-6mm-outside-diameter-266mm-sku-28203601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 36 teeth tooth width 6mm outside diameter 26.6mm SKU: 28203600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-36-teeth-tooth-width-6mm-outside-diameter-26-6mm-sku-28203600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 35 teeth tooth width 6mm outside diameter 25,9mm SKU: 28203501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-35-teeth-tooth-width-6mm-outside-diameter-259mm-sku-28203501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 35 teeth tooth width 6mm outside diameter 25.9mm SKU: 28203500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-35-teeth-tooth-width-6mm-outside-diameter-25-9mm-sku-28203500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 32 teeth tooth width 6mm outside diameter 23,8mm SKU: 28203201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-32-teeth-tooth-width-6mm-outside-diameter-238mm-sku-28203201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 32 teeth tooth width 6mm outside diameter 23.8mm SKU: 28203200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-32-teeth-tooth-width-6mm-outside-diameter-23-8mm-sku-28203200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 30 teeth tooth width 6mm outside diameter 22,4mm SKU: 28203001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-30-teeth-tooth-width-6mm-outside-diameter-224mm-sku-28203001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 30 teeth tooth width 6mm outside diameter 22.4mm SKU: 28203000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-30-teeth-tooth-width-6mm-outside-diameter-22-4mm-sku-28203000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 28 teeth tooth width 6mm outside diameter 21mm SKU: 28202801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-28-teeth-tooth-width-6mm-outside-diameter-21mm-sku-28202801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 28 teeth tooth width 6mm outside diameter 21mm SKU: 28202800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-28-teeth-tooth-width-6mm-outside-diameter-21mm-sku-28202800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 27 teeth tooth width 6mm outside diameter 20,3mm SKU: 28202701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-27-teeth-tooth-width-6mm-outside-diameter-203mm-sku-28202701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 27 teeth tooth width 6mm outside diameter 20.3mm SKU: 28202700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-27-teeth-tooth-width-6mm-outside-diameter-20-3mm-sku-28202700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 26 teeth tooth width 6mm outside diameter 19,6mm SKU: 28202601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-26-teeth-tooth-width-6mm-outside-diameter-196mm-sku-28202601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 26 teeth tooth width 6mm outside diameter 19.6mm SKU: 28202600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-26-teeth-tooth-width-6mm-outside-diameter-19-6mm-sku-28202600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 25 teeth tooth width 6mm outside diameter 18,9mm SKU: 28202501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-25-teeth-tooth-width-6mm-outside-diameter-189mm-sku-28202501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 25 teeth tooth width 6mm outside diameter 18.9mm SKU: 28202500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-25-teeth-tooth-width-6mm-outside-diameter-18-9mm-sku-28202500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 24 teeth tooth width 6mm outside diameter 18,2mm SKU: 28202401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-24-teeth-tooth-width-6mm-outside-diameter-182mm-sku-28202401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 24 teeth tooth width 6mm outside diameter 18.2mm SKU: 28202400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-24-teeth-tooth-width-6mm-outside-diameter-18-2mm-sku-28202400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 23 teeth tooth width 6mm outside diameter 17,5mm SKU: 28202301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-23-teeth-tooth-width-6mm-outside-diameter-175mm-sku-28202301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 23 teeth tooth width 6mm outside diameter 17.5mm SKU: 28202300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-23-teeth-tooth-width-6mm-outside-diameter-17-5mm-sku-28202300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 22 teeth tooth width 6mm outside diameter 16,8mm SKU: 28202201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-22-teeth-tooth-width-6mm-outside-diameter-168mm-sku-28202201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 22 teeth tooth width 6mm outside diameter 16.8mm SKU: 28202200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-22-teeth-tooth-width-6mm-outside-diameter-16-8mm-sku-28202200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 21 teeth tooth width 6mm outside diameter 16,1mm SKU: 28202101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-21-teeth-tooth-width-6mm-outside-diameter-161mm-sku-28202101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 21 teeth tooth width 6mm outside diameter 16.1mm SKU: 28202100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-21-teeth-tooth-width-6mm-outside-diameter-16-1mm-sku-28202100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 20 teeth tooth width 6mm outside diameter 15,4mm SKU: 28202001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-20-teeth-tooth-width-6mm-outside-diameter-154mm-sku-28202001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 20 teeth tooth width 6mm outside diameter 15.4mm SKU: 28202000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-20-teeth-tooth-width-6mm-outside-diameter-15-4mm-sku-28202000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 19 teeth tooth width 6mm outside diameter 14,7mm SKU: 28201901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-19-teeth-tooth-width-6mm-outside-diameter-147mm-sku-28201901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 19 teeth tooth width 6mm outside diameter 14.7mm SKU: 28201900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-19-teeth-tooth-width-6mm-outside-diameter-14-7mm-sku-28201900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 18 teeth tooth width 6mm outside diameter 14mm SKU: 28201801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-18-teeth-tooth-width-6mm-outside-diameter-14mm-sku-28201801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 18 teeth tooth width 6mm outside diameter 14mm SKU: 28201800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-18-teeth-tooth-width-6mm-outside-diameter-14mm-sku-28201800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 17 teeth tooth width 6mm outside diameter 13,3mm SKU: 28201701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-17-teeth-tooth-width-6mm-outside-diameter-133mm-sku-28201701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 17 teeth tooth width 6mm outside diameter 13.3mm SKU: 28201700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-17-teeth-tooth-width-6mm-outside-diameter-13-3mm-sku-28201700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 16 teeth tooth width 6mm outside diameter 12,6mm SKU: 28201601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-16-teeth-tooth-width-6mm-outside-diameter-126mm-sku-28201601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 16 teeth tooth width 6mm outside diameter 12.6mm SKU: 28201600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-16-teeth-tooth-width-6mm-outside-diameter-12-6mm-sku-28201600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 15 teeth tooth width 6mm outside diameter 11,9mm SKU: 28201501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-15-teeth-tooth-width-6mm-outside-diameter-119mm-sku-28201501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 15 teeth tooth width 6mm outside diameter 11.9mm SKU: 28201500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-15-teeth-tooth-width-6mm-outside-diameter-11-9mm-sku-28201500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 14 teeth tooth width 6mm outside diameter 11,2mm SKU: 28201401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-14-teeth-tooth-width-6mm-outside-diameter-112mm-sku-28201401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 14 teeth tooth width 6mm outside diameter 11.2mm SKU: 28201400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-14-teeth-tooth-width-6mm-outside-diameter-11-2mm-sku-28201400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 13 teeth tooth width 6mm outside diameter 10,5mm SKU: 28201301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-13-teeth-tooth-width-6mm-outside-diameter-105mm-sku-28201301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 13 teeth tooth width 6mm outside diameter 10.5mm SKU: 28201300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-13-teeth-tooth-width-6mm-outside-diameter-10-5mm-sku-28201300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 12 teeth tooth width 6mm outside diameter 9.8mm SKU: 28201201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-12-teeth-tooth-width-6mm-outside-diameter-9-8mm-sku-28201201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 12 teeth tooth width 6mm outside diameter 9.8mm SKU: 28201200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-12-teeth-tooth-width-6mm-outside-diameter-9-8mm-sku-28201200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 120 teeth tooth width 3mm outside diameter 61mm SKU: 28112001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-120-teeth-tooth-width-3mm-outside-diameter-61mm-sku-28112001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 120 teeth tooth width 3mm outside diameter 61mm SKU: 28112000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-120-teeth-tooth-width-3mm-outside-diameter-61mm-sku-28112000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 100 teeth tooth width 3mm outside diameter 51mm SKU: 28110001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-100-teeth-tooth-width-3mm-outside-diameter-51mm-sku-28110001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 100 teeth tooth width 3mm outside diameter 51mm SKU: 28110000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-100-teeth-tooth-width-3mm-outside-diameter-51mm-sku-28110000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 96 teeth tooth width 3mm outside diameter 49mm SKU: 28109601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-96-teeth-tooth-width-3mm-outside-diameter-49mm-sku-28109601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 96 teeth tooth width 3mm outside diameter 49mm SKU: 28109600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-96-teeth-tooth-width-3mm-outside-diameter-49mm-sku-28109600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 90 teeth tooth width 3mm outside diameter 46mm SKU: 28109001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-90-teeth-tooth-width-3mm-outside-diameter-46mm-sku-28109001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 90 teeth tooth width 3mm outside diameter 46mm SKU: 28109000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-90-teeth-tooth-width-3mm-outside-diameter-46mm-sku-28109000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 80 teeth tooth width 3mm outside diameter 41mm SKU: 28108001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-80-teeth-tooth-width-3mm-outside-diameter-41mm-sku-28108001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 80 teeth tooth width 3mm outside diameter 41mm SKU: 28108000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-80-teeth-tooth-width-3mm-outside-diameter-41mm-sku-28108000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 18 teeth tooth width 12mm outside diameter 30mm SKU: 28501801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-18-teeth-tooth-width-12mm-outside-diameter-30mm-sku-28501801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 18 teeth tooth width 12mm outside diameter 30mm SKU: 28501800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-18-teeth-tooth-width-12mm-outside-diameter-30mm-sku-28501800/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 17 teeth tooth width 12mm outside diameter 28,5mm SKU: 28501701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-17-teeth-tooth-width-12mm-outside-diameter-285mm-sku-28501701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 17 teeth tooth width 12mm outside diameter 28.5mm SKU: 28501700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-17-teeth-tooth-width-12mm-outside-diameter-28-5mm-sku-28501700/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 16 teeth tooth width 12mm outside diameter 27mm SKU: 28501601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-16-teeth-tooth-width-12mm-outside-diameter-27mm-sku-28501601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 16 teeth tooth width 12mm outside diameter 27mm SKU: 28501600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-16-teeth-tooth-width-12mm-outside-diameter-27mm-sku-28501600/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 15 teeth tooth width 12mm outside diameter 25,5mm SKU: 28501501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-15-teeth-tooth-width-12mm-outside-diameter-255mm-sku-28501501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 15 teeth tooth width 12mm outside diameter 25.5mm SKU: 28501500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-15-teeth-tooth-width-12mm-outside-diameter-25-5mm-sku-28501500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 14 teeth tooth width 12mm outside diameter 24mm SKU: 28501401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-14-teeth-tooth-width-12mm-outside-diameter-24mm-sku-28501401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 14 teeth tooth width 12mm outside diameter 24mm SKU: 28501400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-14-teeth-tooth-width-12mm-outside-diameter-24mm-sku-28501400/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 13 teeth tooth width 12mm outside diameter 22,5mm SKU: 28501301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-13-teeth-tooth-width-12mm-outside-diameter-225mm-sku-28501301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 13 teeth tooth width 12mm outside diameter 22.5mm SKU: 28501300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-13-teeth-tooth-width-12mm-outside-diameter-22-5mm-sku-28501300/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 12 teeth tooth width 12mm outside diameter 21mm SKU: 28501201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-12-teeth-tooth-width-12mm-outside-diameter-21mm-sku-28501201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 12 teeth tooth width 12mm outside diameter 21mm SKU: 28501200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-12-teeth-tooth-width-12mm-outside-diameter-21mm-sku-28501200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 140 teeth tooth width 9mm outside diameter 142mm SKU: 28314001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-140-teeth-tooth-width-9mm-outside-diameter-142mm-sku-28314001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 140 teeth tooth width 9mm outside diameter 142mm SKU: 28314000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-140-teeth-tooth-width-9mm-outside-diameter-142mm-sku-28314000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 130 teeth tooth width 9mm outside diameter 132mm SKU: 28313001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-130-teeth-tooth-width-9mm-outside-diameter-132mm-sku-28313001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 130 teeth tooth width 9mm outside diameter 132mm SKU: 28313000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-130-teeth-tooth-width-9mm-outside-diameter-132mm-sku-28313000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 120 teeth tooth width 9mm outside diameter 122mm SKU: 28312001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-120-teeth-tooth-width-9mm-outside-diameter-122mm-sku-28312001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 120 teeth tooth width 9mm outside diameter 122mm SKU: 28312000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-120-teeth-tooth-width-9mm-outside-diameter-122mm-sku-28312000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 110 teeth tooth width 9mm outside diameter 112mm SKU: 28311001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-110-teeth-tooth-width-9mm-outside-diameter-112mm-sku-28311001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 110 teeth tooth width 9mm outside diameter 112mm SKU: 28311000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-110-teeth-tooth-width-9mm-outside-diameter-112mm-sku-28311000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 100 teeth tooth width 9mm outside diameter 102mm SKU: 28310001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-100-teeth-tooth-width-9mm-outside-diameter-102mm-sku-28310001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 100 teeth tooth width 9mm outside diameter 102mm SKU: 28310000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-100-teeth-tooth-width-9mm-outside-diameter-102mm-sku-28310000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 90 teeth tooth width 9mm outside diameter 92mm SKU: 28309001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-90-teeth-tooth-width-9mm-outside-diameter-92mm-sku-28309001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 90 teeth tooth width 9mm outside diameter 92mm SKU: 28309000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-90-teeth-tooth-width-9mm-outside-diameter-92mm-sku-28309000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 85 teeth tooth width 9mm outside diameter 87mm SKU: 28308501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-85-teeth-tooth-width-9mm-outside-diameter-87mm-sku-28308501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 85 teeth tooth width 9mm outside diameter 87mm SKU: 28308500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-85-teeth-tooth-width-9mm-outside-diameter-87mm-sku-28308500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 80 teeth tooth width 9mm outside diameter 82mm SKU: 28308001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-80-teeth-tooth-width-9mm-outside-diameter-82mm-sku-28308001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 80 teeth tooth width 9mm outside diameter 82mm SKU: 28308000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-80-teeth-tooth-width-9mm-outside-diameter-82mm-sku-28308000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 75 teeth tooth width 9mm outside diameter 77mm SKU: 28307501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-75-teeth-tooth-width-9mm-outside-diameter-77mm-sku-28307501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 75 teeth tooth width 9mm outside diameter 77mm SKU: 28307500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-75-teeth-tooth-width-9mm-outside-diameter-77mm-sku-28307500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 72 teeth tooth width 9mm outside diameter 74mm SKU: 28307201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-72-teeth-tooth-width-9mm-outside-diameter-74mm-sku-28307201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 72 teeth tooth width 9mm outside diameter 74mm SKU: 28307200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-72-teeth-tooth-width-9mm-outside-diameter-74mm-sku-28307200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 70 teeth tooth width 9mm outside diameter 72mm SKU: 28307001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-70-teeth-tooth-width-9mm-outside-diameter-72mm-sku-28307001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 70 teeth tooth width 9mm outside diameter 72mm SKU: 28307000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-70-teeth-tooth-width-9mm-outside-diameter-72mm-sku-28307000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 65 teeth tooth width 9mm outside diameter 67mm SKU: 28306501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-65-teeth-tooth-width-9mm-outside-diameter-67mm-sku-28306501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 65 teeth tooth width 9mm outside diameter 67mm SKU: 28306500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-65-teeth-tooth-width-9mm-outside-diameter-67mm-sku-28306500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 64 teeth tooth width 9mm outside diameter 66mm SKU: 28306401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-64-teeth-tooth-width-9mm-outside-diameter-66mm-sku-28306401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 64 teeth tooth width 9mm outside diameter 66mm SKU: 28306400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-64-teeth-tooth-width-9mm-outside-diameter-66mm-sku-28306400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 60 teeth tooth width 9mm outside diameter 62mm SKU: 28306001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-60-teeth-tooth-width-9mm-outside-diameter-62mm-sku-28306001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 60 teeth tooth width 9mm outside diameter 62mm SKU: 28306000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-60-teeth-tooth-width-9mm-outside-diameter-62mm-sku-28306000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 58 teeth tooth width 9mm outside diameter 60mm SKU: 28305801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-58-teeth-tooth-width-9mm-outside-diameter-60mm-sku-28305801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 58 teeth tooth width 9mm outside diameter 60mm SKU: 28305800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-58-teeth-tooth-width-9mm-outside-diameter-60mm-sku-28305800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 56 teeth tooth width 9mm outside diameter 58mm SKU: 28305601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-56-teeth-tooth-width-9mm-outside-diameter-58mm-sku-28305601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 56 teeth tooth width 9mm outside diameter 58mm SKU: 28305600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-56-teeth-tooth-width-9mm-outside-diameter-58mm-sku-28305600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 55 teeth tooth width 9mm outside diameter 57mm SKU: 28305501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-55-teeth-tooth-width-9mm-outside-diameter-57mm-sku-28305501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 55 teeth tooth width 9mm outside diameter 57mm SKU: 28305500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-55-teeth-tooth-width-9mm-outside-diameter-57mm-sku-28305500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 54 teeth tooth width 9mm outside diameter 56mm SKU: 28305401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-54-teeth-tooth-width-9mm-outside-diameter-56mm-sku-28305401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 54 teeth tooth width 9mm outside diameter 56mm SKU: 28305400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-54-teeth-tooth-width-9mm-outside-diameter-56mm-sku-28305400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 52 teeth tooth width 9mm outside diameter 54mm SKU: 28305201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-52-teeth-tooth-width-9mm-outside-diameter-54mm-sku-28305201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 52 teeth tooth width 9mm outside diameter 54mm SKU: 28305200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-52-teeth-tooth-width-9mm-outside-diameter-54mm-sku-28305200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 50 teeth tooth width 9mm outside diameter 52mm SKU: 28305001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-50-teeth-tooth-width-9mm-outside-diameter-52mm-sku-28305001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 50 teeth tooth width 9mm outside diameter 52mm SKU: 28305000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-50-teeth-tooth-width-9mm-outside-diameter-52mm-sku-28305000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 48 teeth tooth width 9mm outside diameter 50mm SKU: 28304801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-48-teeth-tooth-width-9mm-outside-diameter-50mm-sku-28304801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 48 teeth tooth width 9mm outside diameter 50mm SKU: 28304800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-48-teeth-tooth-width-9mm-outside-diameter-50mm-sku-28304800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 45 teeth tooth width 9mm outside diameter 47mm SKU: 28304501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-45-teeth-tooth-width-9mm-outside-diameter-47mm-sku-28304501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 45 teeth tooth width 9mm outside diameter 47mm SKU: 28304500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-45-teeth-tooth-width-9mm-outside-diameter-47mm-sku-28304500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 42 teeth tooth width 9mm outside diameter 44mm SKU: 28304201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-42-teeth-tooth-width-9mm-outside-diameter-44mm-sku-28304201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 42 teeth tooth width 9mm outside diameter 44mm SKU: 28304200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-42-teeth-tooth-width-9mm-outside-diameter-44mm-sku-28304200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 40 teeth tooth width 9mm outside diameter 42mm SKU: 28304001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-40-teeth-tooth-width-9mm-outside-diameter-42mm-sku-28304001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 40 teeth tooth width 9mm outside diameter 42mm SKU: 28304000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-40-teeth-tooth-width-9mm-outside-diameter-42mm-sku-28304000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 38 teeth tooth width 9mm outside diameter 40mm SKU: 28303801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-38-teeth-tooth-width-9mm-outside-diameter-40mm-sku-28303801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 38 teeth tooth width 9mm outside diameter 40mm SKU: 28303800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-38-teeth-tooth-width-9mm-outside-diameter-40mm-sku-28303800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 36 teeth tooth width 9mm outside diameter 38mm SKU: 28303601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-36-teeth-tooth-width-9mm-outside-diameter-38mm-sku-28303601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 36 teeth tooth width 9mm outside diameter 38mm SKU: 28303600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-36-teeth-tooth-width-9mm-outside-diameter-38mm-sku-28303600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 35 teeth tooth width 9mm outside diameter 37mm SKU: 28303501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-35-teeth-tooth-width-9mm-outside-diameter-37mm-sku-28303501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 35 teeth tooth width 9mm outside diameter 37mm SKU: 28303500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-35-teeth-tooth-width-9mm-outside-diameter-37mm-sku-28303500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 32 teeth tooth width 9mm outside diameter 34mm SKU: 28303201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-32-teeth-tooth-width-9mm-outside-diameter-34mm-sku-28303201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 32 teeth tooth width 9mm outside diameter 34mm SKU: 28303200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-32-teeth-tooth-width-9mm-outside-diameter-34mm-sku-28303200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 30 teeth tooth width 9mm outside diameter 32mm SKU: 28303001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-30-teeth-tooth-width-9mm-outside-diameter-32mm-sku-28303001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 30 teeth tooth width 9mm outside diameter 32mm SKU: 28303000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-30-teeth-tooth-width-9mm-outside-diameter-32mm-sku-28303000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 28 teeth tooth width 9mm outside diameter 30mm SKU: 28302801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-28-teeth-tooth-width-9mm-outside-diameter-30mm-sku-28302801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 28 teeth tooth width 9mm outside diameter 30mm SKU: 28302800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-28-teeth-tooth-width-9mm-outside-diameter-30mm-sku-28302800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 27 teeth tooth width 9mm outside diameter 29mm SKU: 28302701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-27-teeth-tooth-width-9mm-outside-diameter-29mm-sku-28302701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 27 teeth tooth width 9mm outside diameter 29mm SKU: 28302700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-27-teeth-tooth-width-9mm-outside-diameter-29mm-sku-28302700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 26 teeth tooth width 9mm outside diameter 28mm SKU: 28302601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-26-teeth-tooth-width-9mm-outside-diameter-28mm-sku-28302601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 26 teeth tooth width 9mm outside diameter 28mm SKU: 28302600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-26-teeth-tooth-width-9mm-outside-diameter-28mm-sku-28302600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 25 teeth tooth width 9mm outside diameter 27mm SKU: 28302501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-25-teeth-tooth-width-9mm-outside-diameter-27mm-sku-28302501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 25 teeth tooth width 9mm outside diameter 27mm SKU: 28302500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-25-teeth-tooth-width-9mm-outside-diameter-27mm-sku-28302500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 24 teeth tooth width 9mm outside diameter 26mm SKU: 28302401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-24-teeth-tooth-width-9mm-outside-diameter-26mm-sku-28302401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 24 teeth tooth width 9mm outside diameter 26mm SKU: 28302400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-24-teeth-tooth-width-9mm-outside-diameter-26mm-sku-28302400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 23 teeth tooth width 9mm outside diameter 25mm SKU: 28302301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-23-teeth-tooth-width-9mm-outside-diameter-25mm-sku-28302301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 23 teeth tooth width 9mm outside diameter 25mm SKU: 28302300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-23-teeth-tooth-width-9mm-outside-diameter-25mm-sku-28302300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 22 teeth tooth width 9mm outside diameter 24mm SKU: 28302201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-22-teeth-tooth-width-9mm-outside-diameter-24mm-sku-28302201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 22 teeth tooth width 9mm outside diameter 24mm SKU: 28302200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-22-teeth-tooth-width-9mm-outside-diameter-24mm-sku-28302200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 21 teeth tooth width 9mm outside diameter 23mm SKU: 28302101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-21-teeth-tooth-width-9mm-outside-diameter-23mm-sku-28302101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 21 teeth tooth width 9mm outside diameter 23mm SKU: 28302100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-21-teeth-tooth-width-9mm-outside-diameter-23mm-sku-28302100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 20 teeth tooth width 9mm outside diameter 22mm SKU: 28302001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-20-teeth-tooth-width-9mm-outside-diameter-22mm-sku-28302001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 20 teeth tooth width 9mm outside diameter 22mm SKU: 28302000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-20-teeth-tooth-width-9mm-outside-diameter-22mm-sku-28302000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 19 teeth tooth width 9mm outside diameter 21mm SKU: 28301901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-19-teeth-tooth-width-9mm-outside-diameter-21mm-sku-28301901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 19 teeth tooth width 9mm outside diameter 21mm SKU: 28301900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-19-teeth-tooth-width-9mm-outside-diameter-21mm-sku-28301900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 18 teeth tooth width 9mm outside diameter 20mm SKU: 28301801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-18-teeth-tooth-width-9mm-outside-diameter-20mm-sku-28301801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 18 teeth tooth width 9mm outside diameter 20mm SKU: 28301800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-18-teeth-tooth-width-9mm-outside-diameter-20mm-sku-28301800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 17 teeth tooth width 9mm outside diameter 19mm SKU: 28301701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-17-teeth-tooth-width-9mm-outside-diameter-19mm-sku-28301701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 17 teeth tooth width 9mm outside diameter 19mm SKU: 28301700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-17-teeth-tooth-width-9mm-outside-diameter-19mm-sku-28301700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 16 teeth tooth width 9mm outside diameter 18mm SKU: 28301601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-16-teeth-tooth-width-9mm-outside-diameter-18mm-sku-28301601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 16 teeth tooth width 9mm outside diameter 18mm SKU: 28301600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-16-teeth-tooth-width-9mm-outside-diameter-18mm-sku-28301600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 15 teeth tooth width 9mm outside diameter 17mm SKU: 28301501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-15-teeth-tooth-width-9mm-outside-diameter-17mm-sku-28301501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 15 teeth tooth width 9mm outside diameter 17mm SKU: 28301500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-15-teeth-tooth-width-9mm-outside-diameter-17mm-sku-28301500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 28 teeth tooth width 15mm outside diameter 60mm SKU: 28602801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-28-teeth-tooth-width-15mm-outside-diameter-60mm-sku-28602801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 28 teeth tooth width 15mm outside diameter 60mm SKU: 28602800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-28-teeth-tooth-width-15mm-outside-diameter-60mm-sku-28602800/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 27 teeth tooth width 15mm outside diameter 58mm SKU: 28602701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-27-teeth-tooth-width-15mm-outside-diameter-58mm-sku-28602701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 27 teeth tooth width 15mm outside diameter 58mm SKU: 28602700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-27-teeth-tooth-width-15mm-outside-diameter-58mm-sku-28602700/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 26 teeth tooth width 15mm outside diameter 56mm SKU: 28602601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-26-teeth-tooth-width-15mm-outside-diameter-56mm-sku-28602601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 26 teeth tooth width 15mm outside diameter 56mm SKU: 28602600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-26-teeth-tooth-width-15mm-outside-diameter-56mm-sku-28602600/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 25 teeth tooth width 15mm outside diameter 54mm SKU: 28602501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-25-teeth-tooth-width-15mm-outside-diameter-54mm-sku-28602501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 25 teeth tooth width 15mm outside diameter 54mm SKU: 28602500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-25-teeth-tooth-width-15mm-outside-diameter-54mm-sku-28602500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 24 teeth tooth width 15mm outside diameter 52mm SKU: 28602401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-24-teeth-tooth-width-15mm-outside-diameter-52mm-sku-28602401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 24 teeth tooth width 15mm outside diameter 52mm SKU: 28602400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-24-teeth-tooth-width-15mm-outside-diameter-52mm-sku-28602400/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 23 teeth tooth width 15mm outside diameter 50mm SKU: 28602301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-23-teeth-tooth-width-15mm-outside-diameter-50mm-sku-28602301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 23 teeth tooth width 15mm outside diameter 50mm SKU: 28602300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-23-teeth-tooth-width-15mm-outside-diameter-50mm-sku-28602300/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 22 teeth tooth width 15mm outside diameter 48mm SKU: 28602201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-22-teeth-tooth-width-15mm-outside-diameter-48mm-sku-28602201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 22 teeth tooth width 15mm outside diameter 48mm SKU: 28602200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-22-teeth-tooth-width-15mm-outside-diameter-48mm-sku-28602200/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 21 teeth tooth width 15mm outside diameter 46mm SKU: 28602101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-21-teeth-tooth-width-15mm-outside-diameter-46mm-sku-28602101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 21 teeth tooth width 15mm outside diameter 46mm SKU: 28602100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-21-teeth-tooth-width-15mm-outside-diameter-46mm-sku-28602100/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 20 teeth tooth width 15mm outside diameter 44mm SKU: 28602001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-20-teeth-tooth-width-15mm-outside-diameter-44mm-sku-28602001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 20 teeth tooth width 15mm outside diameter 44mm SKU: 28602000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-20-teeth-tooth-width-15mm-outside-diameter-44mm-sku-28602000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 19 teeth tooth width 15mm outside diameter 42mm SKU: 28601901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-19-teeth-tooth-width-15mm-outside-diameter-42mm-sku-28601901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 19 teeth tooth width 15mm outside diameter 42mm SKU: 28601900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-19-teeth-tooth-width-15mm-outside-diameter-42mm-sku-28601900/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 18 teeth tooth width 15mm outside diameter 40mm SKU: 28601801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-18-teeth-tooth-width-15mm-outside-diameter-40mm-sku-28601801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 18 teeth tooth width 15mm outside diameter 40mm SKU: 28601800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-18-teeth-tooth-width-15mm-outside-diameter-40mm-sku-28601800/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 17 teeth tooth width 15mm outside diameter 38mm SKU: 28601701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-17-teeth-tooth-width-15mm-outside-diameter-38mm-sku-28601701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 17 teeth tooth width 15mm outside diameter 38mm SKU: 28601700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-17-teeth-tooth-width-15mm-outside-diameter-38mm-sku-28601700/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 16 teeth tooth width 15mm outside diameter 36mm SKU: 28601601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-16-teeth-tooth-width-15mm-outside-diameter-36mm-sku-28601601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 16 teeth tooth width 15mm outside diameter 36mm SKU: 28601600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-16-teeth-tooth-width-15mm-outside-diameter-36mm-sku-28601600/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 15 teeth tooth width 15mm outside diameter 34mm SKU: 28601501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-15-teeth-tooth-width-15mm-outside-diameter-34mm-sku-28601501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 15 teeth tooth width 15mm outside diameter 34mm SKU: 28601500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-15-teeth-tooth-width-15mm-outside-diameter-34mm-sku-28601500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 14 teeth tooth width 15mm outside diameter 32mm SKU: 28601401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-14-teeth-tooth-width-15mm-outside-diameter-32mm-sku-28601401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 14 teeth tooth width 15mm outside diameter 32mm SKU: 28601400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-14-teeth-tooth-width-15mm-outside-diameter-32mm-sku-28601400/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 13 teeth tooth width 15mm outside diameter 30mm SKU: 28601301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-13-teeth-tooth-width-15mm-outside-diameter-30mm-sku-28601301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 13 teeth tooth width 15mm outside diameter 30mm SKU: 28601300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-13-teeth-tooth-width-15mm-outside-diameter-30mm-sku-28601300/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 12 teeth tooth width 15mm outside diameter 28mm SKU: 28601201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-12-teeth-tooth-width-15mm-outside-diameter-28mm-sku-28601201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 12 teeth tooth width 15mm outside diameter 28mm SKU: 28601200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-12-teeth-tooth-width-15mm-outside-diameter-28mm-sku-28601200/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 150 teeth tooth width 19mm outside diameter 228mm SKU: 28515001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-150-teeth-tooth-width-19mm-outside-diameter-228mm-sku-28515001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 150 teeth tooth width 19mm outside diameter 228mm SKU: 28515000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-150-teeth-tooth-width-19mm-outside-diameter-228mm-sku-28515000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 140 teeth tooth width 19mm outside diameter 213mm SKU: 28514001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-140-teeth-tooth-width-19mm-outside-diameter-213mm-sku-28514001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 140 teeth tooth width 19mm outside diameter 213mm SKU: 28514000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-140-teeth-tooth-width-19mm-outside-diameter-213mm-sku-28514000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 130 teeth tooth width 19mm outside diameter 198mm SKU: 28513001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-130-teeth-tooth-width-19mm-outside-diameter-198mm-sku-28513001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 130 teeth tooth width 19mm outside diameter 198mm SKU: 28513000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-130-teeth-tooth-width-19mm-outside-diameter-198mm-sku-28513000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 120 teeth tooth width 19mm outside diameter 183mm SKU: 28512001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-120-teeth-tooth-width-19mm-outside-diameter-183mm-sku-28512001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 120 teeth tooth width 19mm outside diameter 183mm SKU: 28512000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-120-teeth-tooth-width-19mm-outside-diameter-183mm-sku-28512000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 110 teeth tooth width 19mm outside diameter 168mm SKU: 28511001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-110-teeth-tooth-width-19mm-outside-diameter-168mm-sku-28511001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 110 teeth tooth width 19mm outside diameter 168mm SKU: 28511000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-110-teeth-tooth-width-19mm-outside-diameter-168mm-sku-28511000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 100 teeth tooth width 19mm outside diameter 153mm SKU: 28510001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-100-teeth-tooth-width-19mm-outside-diameter-153mm-sku-28510001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 100 teeth tooth width 19mm outside diameter 153mm SKU: 28510000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-100-teeth-tooth-width-19mm-outside-diameter-153mm-sku-28510000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 90 teeth tooth width 12mm outside diameter 138mm SKU: 28509001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-90-teeth-tooth-width-12mm-outside-diameter-138mm-sku-28509001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 90 teeth tooth width 12mm outside diameter 138mm SKU: 28509000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-90-teeth-tooth-width-12mm-outside-diameter-138mm-sku-28509000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 80 teeth tooth width 12mm outside diameter 123mm SKU: 28508001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-80-teeth-tooth-width-12mm-outside-diameter-123mm-sku-28508001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 80 teeth tooth width 12mm outside diameter 123mm SKU: 28508000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-80-teeth-tooth-width-12mm-outside-diameter-123mm-sku-28508000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 70 teeth tooth width 12mm outside diameter 108mm SKU: 28507001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-70-teeth-tooth-width-12mm-outside-diameter-108mm-sku-28507001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 70 teeth tooth width 12mm outside diameter 108mm SKU: 28507000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-70-teeth-tooth-width-12mm-outside-diameter-108mm-sku-28507000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 60 teeth tooth width 12mm outside diameter 93mm SKU: 28506001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-60-teeth-tooth-width-12mm-outside-diameter-93mm-sku-28506001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 60 teeth tooth width 12mm outside diameter 93mm SKU: 28506000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-60-teeth-tooth-width-12mm-outside-diameter-93mm-sku-28506000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 55 teeth tooth width 12mm outside diameter 85,5mm SKU: 28505501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-55-teeth-tooth-width-12mm-outside-diameter-855mm-sku-28505501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 55 teeth tooth width 12mm outside diameter 85.5mm SKU: 28505500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-55-teeth-tooth-width-12mm-outside-diameter-85-5mm-sku-28505500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 54 teeth tooth width 12mm outside diameter 84mm SKU: 28505401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-54-teeth-tooth-width-12mm-outside-diameter-84mm-sku-28505401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 54 teeth tooth width 12mm outside diameter 84mm SKU: 28505400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-54-teeth-tooth-width-12mm-outside-diameter-84mm-sku-28505400/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 52 teeth tooth width 12mm outside diameter 81mm SKU: 28505201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-52-teeth-tooth-width-12mm-outside-diameter-81mm-sku-28505201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 52 teeth tooth width 12mm outside diameter 81mm SKU: 28505200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-52-teeth-tooth-width-12mm-outside-diameter-81mm-sku-28505200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 48 teeth tooth width 12mm outside diameter 75mm SKU: 28505001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-48-teeth-tooth-width-12mm-outside-diameter-75mm-sku-28505001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 50 teeth tooth width 12mm outside diameter 78mm SKU: 28505000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-50-teeth-tooth-width-12mm-outside-diameter-78mm-sku-28505000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 48 teeth tooth width 12mm outside diameter 75mm SKU: 28504801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-48-teeth-tooth-width-12mm-outside-diameter-75mm-sku-28504801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 48 teeth tooth width 12mm outside diameter 75mm SKU: 28504800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-48-teeth-tooth-width-12mm-outside-diameter-75mm-sku-28504800/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 45 teeth tooth width 12mm outside diameter 70,5mm SKU: 28504501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-45-teeth-tooth-width-12mm-outside-diameter-705mm-sku-28504501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 45 teeth tooth width 12mm outside diameter 70.5mm SKU: 28504500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-45-teeth-tooth-width-12mm-outside-diameter-70-5mm-sku-28504500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 42 teeth tooth width 12mm outside diameter 66mm SKU: 28504201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-42-teeth-tooth-width-12mm-outside-diameter-66mm-sku-28504201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 42 teeth tooth width 12mm outside diameter 66mm SKU: 28504200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-42-teeth-tooth-width-12mm-outside-diameter-66mm-sku-28504200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 40 teeth tooth width 12mm outside diameter 63mm SKU: 28504001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-40-teeth-tooth-width-12mm-outside-diameter-63mm-sku-28504001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 40 teeth tooth width 12mm outside diameter 63mm SKU: 28504000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-40-teeth-tooth-width-12mm-outside-diameter-63mm-sku-28504000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 38 teeth tooth width 12mm outside diameter 60mm SKU: 28503801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-38-teeth-tooth-width-12mm-outside-diameter-60mm-sku-28503801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 38 teeth tooth width 12mm outside diameter 60mm SKU: 28503800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-38-teeth-tooth-width-12mm-outside-diameter-60mm-sku-28503800/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 36 teeth tooth width 12mm outside diameter 57mm SKU: 28503601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-36-teeth-tooth-width-12mm-outside-diameter-57mm-sku-28503601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 36 teeth tooth width 12mm outside diameter 57mm SKU: 28503600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-36-teeth-tooth-width-12mm-outside-diameter-57mm-sku-28503600/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 35 teeth tooth width 12mm outside diameter 55,5mm SKU: 28503501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-35-teeth-tooth-width-12mm-outside-diameter-555mm-sku-28503501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 35 teeth tooth width 12mm outside diameter 55.5mm SKU: 28503500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-35-teeth-tooth-width-12mm-outside-diameter-55-5mm-sku-28503500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 32 teeth tooth width 12mm outside diameter 51mm SKU: 28503201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-32-teeth-tooth-width-12mm-outside-diameter-51mm-sku-28503201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 32 teeth tooth width 12mm outside diameter 51mm SKU: 28503200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-32-teeth-tooth-width-12mm-outside-diameter-51mm-sku-28503200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 30 teeth tooth width 12mm outside diameter 48mm SKU: 28503001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-30-teeth-tooth-width-12mm-outside-diameter-48mm-sku-28503001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 30 teeth tooth width 12mm outside diameter 48mm SKU: 28503000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-30-teeth-tooth-width-12mm-outside-diameter-48mm-sku-28503000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 28 teeth tooth width 12mm outside diameter 45mm SKU: 28502801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-28-teeth-tooth-width-12mm-outside-diameter-45mm-sku-28502801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 28 teeth tooth width 12mm outside diameter 45mm SKU: 28502800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-28-teeth-tooth-width-12mm-outside-diameter-45mm-sku-28502800/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 27 teeth tooth width 12mm outside diameter 43,5mm SKU: 28502701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-27-teeth-tooth-width-12mm-outside-diameter-435mm-sku-28502701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 27 teeth tooth width 12mm outside diameter 43.5mm SKU: 28502700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-27-teeth-tooth-width-12mm-outside-diameter-43-5mm-sku-28502700/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 26 teeth tooth width 12mm outside diameter 42mm SKU: 28502601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-26-teeth-tooth-width-12mm-outside-diameter-42mm-sku-28502601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 26 teeth tooth width 12mm outside diameter 42mm SKU: 28502600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-26-teeth-tooth-width-12mm-outside-diameter-42mm-sku-28502600/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 25 teeth tooth width 12mm outside diameter 40,5mm SKU: 28502501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-25-teeth-tooth-width-12mm-outside-diameter-405mm-sku-28502501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 25 teeth tooth width 12mm outside diameter 40.5mm SKU: 28502500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-25-teeth-tooth-width-12mm-outside-diameter-40-5mm-sku-28502500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 24 teeth tooth width 12mm outside diameter 39mm SKU: 28502401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-24-teeth-tooth-width-12mm-outside-diameter-39mm-sku-28502401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 24 teeth tooth width 12mm outside diameter 39mm SKU: 28502400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-24-teeth-tooth-width-12mm-outside-diameter-39mm-sku-28502400/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 23 teeth tooth width 12mm outside diameter 37,5mm SKU: 28502301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-23-teeth-tooth-width-12mm-outside-diameter-375mm-sku-28502301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 23 teeth tooth width 12mm outside diameter 37.5mm SKU: 28502300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-23-teeth-tooth-width-12mm-outside-diameter-37-5mm-sku-28502300/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 22 teeth tooth width 12mm outside diameter 36mm SKU: 28502201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-22-teeth-tooth-width-12mm-outside-diameter-36mm-sku-28502201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 22 teeth tooth width 12mm outside diameter 36mm SKU: 28502200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-22-teeth-tooth-width-12mm-outside-diameter-36mm-sku-28502200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 21 teeth tooth width 12mm outside diameter 34,5mm SKU: 28502101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-21-teeth-tooth-width-12mm-outside-diameter-345mm-sku-28502101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 21 teeth tooth width 12mm outside diameter 34.5mm SKU: 28502100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-21-teeth-tooth-width-12mm-outside-diameter-34-5mm-sku-28502100/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 20 teeth tooth width 12mm outside diameter 33mm SKU: 28502001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-20-teeth-tooth-width-12mm-outside-diameter-33mm-sku-28502001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 20 teeth tooth width 12mm outside diameter 33mm SKU: 28502000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-20-teeth-tooth-width-12mm-outside-diameter-33mm-sku-28502000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 19 teeth tooth width 12mm outside diameter 31,5mm SKU: 28501901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-19-teeth-tooth-width-12mm-outside-diameter-315mm-sku-28501901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 19 teeth tooth width 12mm outside diameter 31.5mm SKU: 28501900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-19-teeth-tooth-width-12mm-outside-diameter-31-5mm-sku-28501900/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 60 teeth tooth width 19mm outside diameter 155mm SKU: 28706001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-60-teeth-tooth-width-19mm-outside-diameter-155mm-sku-28706001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 60 teeth tooth width 19mm outside diameter 155mm SKU: 28706000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-60-teeth-tooth-width-19mm-outside-diameter-155mm-sku-28706000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 55 teeth tooth width 17mm outside diameter 142,5mm SKU: 28705501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-55-teeth-tooth-width-17mm-outside-diameter-1425mm-sku-28705501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 55 teeth tooth width 17mm outside diameter 142,5mm SKU: 28705500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-55-teeth-tooth-width-17mm-outside-diameter-1425mm-sku-28705500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 50 teeth tooth width 17mm outside diameter 130mm SKU: 28705001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-50-teeth-tooth-width-17mm-outside-diameter-130mm-sku-28705001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 50 teeth tooth width 17mm outside diameter 130mm SKU: 28705000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-50-teeth-tooth-width-17mm-outside-diameter-130mm-sku-28705000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 48 teeth tooth width 17mm outside diameter 125mm SKU: 28704801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-48-teeth-tooth-width-17mm-outside-diameter-125mm-sku-28704801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 48 teeth tooth width 17mm outside diameter 125mm SKU: 28704800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-48-teeth-tooth-width-17mm-outside-diameter-125mm-sku-28704800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 45 teeth tooth width 17mm outside diameter 117,5mm SKU: 28704501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-45-teeth-tooth-width-17mm-outside-diameter-1175mm-sku-28704501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 45 teeth tooth width 17mm outside diameter 117,5mm SKU: 28704500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-45-teeth-tooth-width-17mm-outside-diameter-1175mm-sku-28704500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 42 teeth tooth width 17mm outside diameter 110mm SKU: 28704201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-42-teeth-tooth-width-17mm-outside-diameter-110mm-sku-28704201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 42 teeth tooth width 17mm outside diameter 110mm SKU: 28704200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-42-teeth-tooth-width-17mm-outside-diameter-110mm-sku-28704200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 40 teeth tooth width 17mm outside diameter 105mm SKU: 28704001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-40-teeth-tooth-width-17mm-outside-diameter-105mm-sku-28704001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 40 teeth tooth width 17mm outside diameter 105mm SKU: 28704000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-40-teeth-tooth-width-17mm-outside-diameter-105mm-sku-28704000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 38 teeth tooth width 17mm outside diameter 100mm SKU: 28703801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-38-teeth-tooth-width-17mm-outside-diameter-100mm-sku-28703801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 38 teeth tooth width 17mm outside diameter 100mm SKU: 28703800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-38-teeth-tooth-width-17mm-outside-diameter-100mm-sku-28703800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 36 teeth tooth width 17mm outside diameter 95mm SKU: 28703601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-36-teeth-tooth-width-17mm-outside-diameter-95mm-sku-28703601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 36 teeth tooth width 17mm outside diameter 95mm SKU: 28703600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-36-teeth-tooth-width-17mm-outside-diameter-95mm-sku-28703600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 35 teeth tooth width 17mm outside diameter 92,5mm SKU: 28703501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-35-teeth-tooth-width-17mm-outside-diameter-925mm-sku-28703501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 35 teeth tooth width 17mm outside diameter 92,5mm SKU: 28703500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-35-teeth-tooth-width-17mm-outside-diameter-925mm-sku-28703500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 32 teeth tooth width 17mm outside diameter 85mm SKU: 28703201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-32-teeth-tooth-width-17mm-outside-diameter-85mm-sku-28703201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 32 teeth tooth width 17mm outside diameter 85mm SKU: 28703200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-32-teeth-tooth-width-17mm-outside-diameter-85mm-sku-28703200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 30 teeth tooth width 17mm outside diameter 80mm SKU: 28703001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-30-teeth-tooth-width-17mm-outside-diameter-80mm-sku-28703001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 30 teeth tooth width 17mm outside diameter 80mm SKU: 28703000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-30-teeth-tooth-width-17mm-outside-diameter-80mm-sku-28703000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 28 teeth tooth width 17mm outside diameter 75mm SKU: 28702801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-28-teeth-tooth-width-17mm-outside-diameter-75mm-sku-28702801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 28 teeth tooth width 17mm outside diameter 75mm SKU: 28702800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-28-teeth-tooth-width-17mm-outside-diameter-75mm-sku-28702800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 27 teeth tooth width 17mm outside diameter 72,5mm SKU: 28702701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-27-teeth-tooth-width-17mm-outside-diameter-725mm-sku-28702701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 27 teeth tooth width 17mm outside diameter 72,5mm SKU: 28702700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-27-teeth-tooth-width-17mm-outside-diameter-725mm-sku-28702700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 26 teeth tooth width 17mm outside diameter 70mm SKU: 28702601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-26-teeth-tooth-width-17mm-outside-diameter-70mm-sku-28702601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 26 teeth tooth width 17mm outside diameter 70mm SKU: 28702600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-26-teeth-tooth-width-17mm-outside-diameter-70mm-sku-28702600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 25 teeth tooth width 17mm outside diameter 67,5mm SKU: 28702501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-25-teeth-tooth-width-17mm-outside-diameter-675mm-sku-28702501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 25 teeth tooth width 17mm outside diameter 67,5mm SKU: 28702500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-25-teeth-tooth-width-17mm-outside-diameter-675mm-sku-28702500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 24 teeth tooth width 17mm outside diameter 65mm SKU: 28702401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-24-teeth-tooth-width-17mm-outside-diameter-65mm-sku-28702401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 24 teeth tooth width 17mm outside diameter 65mm SKU: 28702400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-24-teeth-tooth-width-17mm-outside-diameter-65mm-sku-28702400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 23 teeth tooth width 17mm outside diameter 62,5mm SKU: 28702301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-23-teeth-tooth-width-17mm-outside-diameter-625mm-sku-28702301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 23 teeth tooth width 17mm outside diameter 62,5mm SKU: 28702300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-23-teeth-tooth-width-17mm-outside-diameter-625mm-sku-28702300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 22 teeth tooth width 17mm outside diameter 60mm SKU: 28702201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-22-teeth-tooth-width-17mm-outside-diameter-60mm-sku-28702201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 22 teeth tooth width 17mm outside diameter 60mm SKU: 28702200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-22-teeth-tooth-width-17mm-outside-diameter-60mm-sku-28702200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 21 teeth tooth width 17mm outside diameter 57,5mm SKU: 28702101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-21-teeth-tooth-width-17mm-outside-diameter-575mm-sku-28702101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 21 teeth tooth width 17mm outside diameter 57,5mm SKU: 28702100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-21-teeth-tooth-width-17mm-outside-diameter-575mm-sku-28702100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 20 teeth tooth width 17mm outside diameter 55mm SKU: 28702001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-20-teeth-tooth-width-17mm-outside-diameter-55mm-sku-28702001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 20 teeth tooth width 17mm outside diameter 55mm SKU: 28702000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-20-teeth-tooth-width-17mm-outside-diameter-55mm-sku-28702000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 19 teeth tooth width 17mm outside diameter 52,5mm SKU: 28701901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-19-teeth-tooth-width-17mm-outside-diameter-525mm-sku-28701901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 19 teeth tooth width 17mm outside diameter 52,5mm SKU: 28701900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-19-teeth-tooth-width-17mm-outside-diameter-525mm-sku-28701900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 18 teeth tooth width 17mm outside diameter 50mm SKU: 28701801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-18-teeth-tooth-width-17mm-outside-diameter-50mm-sku-28701801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 18 teeth tooth width 17mm outside diameter 50mm SKU: 28701800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-18-teeth-tooth-width-17mm-outside-diameter-50mm-sku-28701800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 17 teeth tooth width 17mm outside diameter 47,5mm SKU: 28701701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-17-teeth-tooth-width-17mm-outside-diameter-475mm-sku-28701701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 17 teeth tooth width 17mm outside diameter 47,5mm SKU: 28701700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-17-teeth-tooth-width-17mm-outside-diameter-475mm-sku-28701700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 16 teeth tooth width 17mm outside diameter 45mm SKU: 28701601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-16-teeth-tooth-width-17mm-outside-diameter-45mm-sku-28701601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 16 teeth tooth width 17mm outside diameter 45mm SKU: 28701600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-16-teeth-tooth-width-17mm-outside-diameter-45mm-sku-28701600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 15 teeth tooth width 17mm outside diameter 42,5mm SKU: 28701501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-15-teeth-tooth-width-17mm-outside-diameter-425mm-sku-28701501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 15 teeth tooth width 17mm outside diameter 42,5mm SKU: 28701500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-15-teeth-tooth-width-17mm-outside-diameter-425mm-sku-28701500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 14 teeth tooth width 17mm outside diameter 40mm SKU: 28701401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-14-teeth-tooth-width-17mm-outside-diameter-40mm-sku-28701401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 14 teeth tooth width 17mm outside diameter 40mm SKU: 28701400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-14-teeth-tooth-width-17mm-outside-diameter-40mm-sku-28701400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 13 teeth tooth width 17mm outside diameter 37,5mm SKU: 28701301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-13-teeth-tooth-width-17mm-outside-diameter-375mm-sku-28701301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 13 teeth tooth width 17mm outside diameter 37,5mm SKU: 28701300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-13-teeth-tooth-width-17mm-outside-diameter-375mm-sku-28701300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 12 teeth tooth width 17mm outside diameter 35mm SKU: 28701201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-12-teeth-tooth-width-17mm-outside-diameter-35mm-sku-28701201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 12 teeth tooth width 17mm outside diameter 35mm SKU: 28701200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-12-teeth-tooth-width-17mm-outside-diameter-35mm-sku-28701200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 10 teeth tooth width 17mm outside diameter 30mm SKU: 28701001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-10-teeth-tooth-width-17mm-outside-diameter-30mm-sku-28701001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 10 teeth tooth width 17mm outside diameter 30mm SKU: 28701000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-10-teeth-tooth-width-17mm-outside-diameter-30mm-sku-28701000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 110 teeth tooth width 19mm outside diameter 224mm SKU: 28611001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-110-teeth-tooth-width-19mm-outside-diameter-224mm-sku-28611001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 110 teeth tooth width 19mm outside diameter 224mm SKU: 28611000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-110-teeth-tooth-width-19mm-outside-diameter-224mm-sku-28611000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 100 teeth tooth width 19mm outside diameter 204mm SKU: 28610001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-100-teeth-tooth-width-19mm-outside-diameter-204mm-sku-28610001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 100 teeth tooth width 19mm outside diameter 204mm SKU: 28610000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-100-teeth-tooth-width-19mm-outside-diameter-204mm-sku-28610000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 95 teeth tooth width 19mm outside diameter 194mm SKU: 28609501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-95-teeth-tooth-width-19mm-outside-diameter-194mm-sku-28609501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 95 teeth tooth width 19mm outside diameter 194mm SKU: 28609500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-95-teeth-tooth-width-19mm-outside-diameter-194mm-sku-28609500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 90 teeth tooth width 19mm outside diameter 184mm SKU: 28609001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-90-teeth-tooth-width-19mm-outside-diameter-184mm-sku-28609001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 90 teeth tooth width 19mm outside diameter 184mm SKU: 28609000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-90-teeth-tooth-width-19mm-outside-diameter-184mm-sku-28609000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 85 teeth tooth width 19mm outside diameter 174mm SKU: 28608501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-85-teeth-tooth-width-19mm-outside-diameter-174mm-sku-28608501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 85 teeth tooth width 19mm outside diameter 174mm SKU: 28608500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-85-teeth-tooth-width-19mm-outside-diameter-174mm-sku-28608500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 80 teeth tooth width 19mm outside diameter 164mm SKU: 28608001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-80-teeth-tooth-width-19mm-outside-diameter-164mm-sku-28608001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 80 teeth tooth width 19mm outside diameter 164mm SKU: 28608000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-80-teeth-tooth-width-19mm-outside-diameter-164mm-sku-28608000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 75 teeth tooth width 19mm outside diameter 154mm SKU: 28607501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-75-teeth-tooth-width-19mm-outside-diameter-154mm-sku-28607501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 75 teeth tooth width 19mm outside diameter 154mm SKU: 28607500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-75-teeth-tooth-width-19mm-outside-diameter-154mm-sku-28607500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 70 teeth tooth width 15mm outside diameter 144mm SKU: 28607001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-70-teeth-tooth-width-15mm-outside-diameter-144mm-sku-28607001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 70 teeth tooth width 15mm outside diameter 144mm SKU: 28607000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-70-teeth-tooth-width-15mm-outside-diameter-144mm-sku-28607000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 60 teeth tooth width 15mm outside diameter 124mm SKU: 28606001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-60-teeth-tooth-width-15mm-outside-diameter-124mm-sku-28606001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 60 teeth tooth width 15mm outside diameter 124mm SKU: 28606000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-60-teeth-tooth-width-15mm-outside-diameter-124mm-sku-28606000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 55 teeth tooth width 15mm outside diameter 114mm SKU: 28605501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-55-teeth-tooth-width-15mm-outside-diameter-114mm-sku-28605501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 55 teeth tooth width 15mm outside diameter 114mm SKU: 28605500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-55-teeth-tooth-width-15mm-outside-diameter-114mm-sku-28605500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 50 teeth tooth width 15mm outside diameter 104mm SKU: 28605001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-50-teeth-tooth-width-15mm-outside-diameter-104mm-sku-28605001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 50 teeth tooth width 15mm outside diameter 104mm SKU: 28605000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-50-teeth-tooth-width-15mm-outside-diameter-104mm-sku-28605000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 48 teeth tooth width 15mm outside diameter 100mm SKU: 28604801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-48-teeth-tooth-width-15mm-outside-diameter-100mm-sku-28604801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 48 teeth tooth width 15mm outside diameter 100mm SKU: 28604800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-48-teeth-tooth-width-15mm-outside-diameter-100mm-sku-28604800/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 45 teeth tooth width 15mm outside diameter 94mm SKU: 28604501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-45-teeth-tooth-width-15mm-outside-diameter-94mm-sku-28604501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 45 teeth tooth width 15mm outside diameter 94mm SKU: 28604500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-45-teeth-tooth-width-15mm-outside-diameter-94mm-sku-28604500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 42 teeth tooth width 15mm outside diameter 88mm SKU: 28604201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-42-teeth-tooth-width-15mm-outside-diameter-88mm-sku-28604201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 42 teeth tooth width 15mm outside diameter 88mm SKU: 28604200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-42-teeth-tooth-width-15mm-outside-diameter-88mm-sku-28604200/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 40 teeth tooth width 15mm outside diameter 84mm SKU: 28604001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-40-teeth-tooth-width-15mm-outside-diameter-84mm-sku-28604001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 40 teeth tooth width 15mm outside diameter 84mm SKU: 28604000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-40-teeth-tooth-width-15mm-outside-diameter-84mm-sku-28604000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 38 teeth tooth width 15mm outside diameter 80mm SKU: 28603801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-38-teeth-tooth-width-15mm-outside-diameter-80mm-sku-28603801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 38 teeth tooth width 15mm outside diameter 80mm SKU: 28603800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-38-teeth-tooth-width-15mm-outside-diameter-80mm-sku-28603800/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 36 teeth tooth width 15mm outside diameter 76mm SKU: 28603601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-36-teeth-tooth-width-15mm-outside-diameter-76mm-sku-28603601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 36 teeth tooth width 15mm outside diameter 76mm SKU: 28603600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-36-teeth-tooth-width-15mm-outside-diameter-76mm-sku-28603600/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 35 teeth tooth width 15mm outside diameter 74mm SKU: 28603501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-35-teeth-tooth-width-15mm-outside-diameter-74mm-sku-28603501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 35 teeth tooth width 15mm outside diameter 74mm SKU: 28603500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-35-teeth-tooth-width-15mm-outside-diameter-74mm-sku-28603500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 32 teeth tooth width 15mm outside diameter 68mm SKU: 28603201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-32-teeth-tooth-width-15mm-outside-diameter-68mm-sku-28603201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 32 teeth tooth width 15mm outside diameter 68mm SKU: 28603200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-32-teeth-tooth-width-15mm-outside-diameter-68mm-sku-28603200/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 30 teeth tooth width 15mm outside diameter 64mm SKU: 28603001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-30-teeth-tooth-width-15mm-outside-diameter-64mm-sku-28603001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 30 teeth tooth width 15mm outside diameter 64mm SKU: 28603000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-30-teeth-tooth-width-15mm-outside-diameter-64mm-sku-28603000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of POM with hub module 0.5 40 teeth tooth width 4mm outside diameter 21mm SKU: 29104000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-40-teeth-tooth-width-4mm-outside-diameter-21mm-sku-29104000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 38 teeth tooth width 4mm outside diameter 20mm SKU: 29103800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-38-teeth-tooth-width-4mm-outside-diameter-20mm-sku-29103800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 36 teeth tooth width 4mm outside diameter 19mm SKU: 29103600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-36-teeth-tooth-width-4mm-outside-diameter-19mm-sku-29103600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 35 teeth tooth width 4mm outside diameter 18.5mm SKU: 29103500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-35-teeth-tooth-width-4mm-outside-diameter-18-5mm-sku-29103500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 32 teeth tooth width 4mm outside diameter 17mm SKU: 29103200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-32-teeth-tooth-width-4mm-outside-diameter-17mm-sku-29103200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 30 teeth tooth width 4mm outside diameter 16mm SKU: 29103000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-30-teeth-tooth-width-4mm-outside-diameter-16mm-sku-29103000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 28 teeth tooth width 4mm outside diameter 15mm SKU: 29102800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-28-teeth-tooth-width-4mm-outside-diameter-15mm-sku-29102800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 27 teeth tooth width 4mm outside diameter 14.5mm SKU: 29102700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-27-teeth-tooth-width-4mm-outside-diameter-14-5mm-sku-29102700/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 26 teeth tooth width 4mm outside diameter 14mm SKU: 29102600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-26-teeth-tooth-width-4mm-outside-diameter-14mm-sku-29102600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 25 teeth tooth width 4mm outside diameter 13.5mm SKU: 29102500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-25-teeth-tooth-width-4mm-outside-diameter-13-5mm-sku-29102500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 24 teeth tooth width 4mm outside diameter 13mm SKU: 29102400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-24-teeth-tooth-width-4mm-outside-diameter-13mm-sku-29102400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 23 teeth tooth width 4mm outside diameter 12.5mm SKU: 29102300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-23-teeth-tooth-width-4mm-outside-diameter-12-5mm-sku-29102300/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 22 teeth tooth width 4mm outside diameter 12mm SKU: 29102200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-22-teeth-tooth-width-4mm-outside-diameter-12mm-sku-29102200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 21 teeth tooth width 4mm outside diameter 11.5mm SKU: 29102100](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-21-teeth-tooth-width-4mm-outside-diameter-11-5mm-sku-29102100/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 20 teeth tooth width 4mm outside diameter 11mm SKU: 29102000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-20-teeth-tooth-width-4mm-outside-diameter-11mm-sku-29102000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 19 teeth tooth width 4mm outside diameter 10.5mm SKU: 29101900](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-19-teeth-tooth-width-4mm-outside-diameter-10-5mm-sku-29101900/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 18 teeth tooth width 4mm outside diameter 10mm SKU: 29101800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-18-teeth-tooth-width-4mm-outside-diameter-10mm-sku-29101800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 17 teeth tooth width 4mm outside diameter 9.5mm SKU: 29101700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-17-teeth-tooth-width-4mm-outside-diameter-9-5mm-sku-29101700/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 16 teeth tooth width 4mm outside diameter 9mm SKU: 29101600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-16-teeth-tooth-width-4mm-outside-diameter-9mm-sku-29101600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 15 teeth tooth width 4mm outside diameter 8.5mm SKU: 29101500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-15-teeth-tooth-width-4mm-outside-diameter-8-5mm-sku-29101500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 14 teeth tooth width 4mm outside diameter 8mm SKU: 29101400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-14-teeth-tooth-width-4mm-outside-diameter-8mm-sku-29101400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 13 teeth tooth width 4mm outside diameter 7.5mm SKU: 29101300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-13-teeth-tooth-width-4mm-outside-diameter-7-5mm-sku-29101300/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 12 teeth tooth width 4mm outside diameter 7mm SKU: 29101200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-12-teeth-tooth-width-4mm-outside-diameter-7mm-sku-29101200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 10 teeth tooth width 4mm outside diameter 6mm SKU: 29101000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-10-teeth-tooth-width-4mm-outside-diameter-6mm-sku-29101000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of polyketone die-cast with hub module 3 75 teeth tooth width 19mm outside diameter 231mm SKU: 28807501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-75-teeth-tooth-width-19mm-outside-diameter-231mm-sku-28807501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 75 teeth tooth width 19mm outside diameter 231mm SKU: 28807500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-75-teeth-tooth-width-19mm-outside-diameter-231mm-sku-28807500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 70 teeth tooth width 19mm outside diameter 216mm SKU: 28807001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-70-teeth-tooth-width-19mm-outside-diameter-216mm-sku-28807001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 70 teeth tooth width 19mm outside diameter 216mm SKU: 28807000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-70-teeth-tooth-width-19mm-outside-diameter-216mm-sku-28807000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 65 teeth tooth width 19mm outside diameter 201mm SKU: 28806501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-65-teeth-tooth-width-19mm-outside-diameter-201mm-sku-28806501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 65 teeth tooth width 19mm outside diameter 201mm SKU: 28806500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-65-teeth-tooth-width-19mm-outside-diameter-201mm-sku-28806500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 60 teeth tooth width 19mm outside diameter 186mm SKU: 28806001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-60-teeth-tooth-width-19mm-outside-diameter-186mm-sku-28806001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 60 teeth tooth width 19mm outside diameter 186mm SKU: 28806000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-60-teeth-tooth-width-19mm-outside-diameter-186mm-sku-28806000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 55 teeth tooth width 19mm outside diameter 171mm SKU: 28805501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-55-teeth-tooth-width-19mm-outside-diameter-171mm-sku-28805501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 55 teeth tooth width 19mm outside diameter 171mm SKU: 28805500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-55-teeth-tooth-width-19mm-outside-diameter-171mm-sku-28805500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 50 teeth tooth width 19mm outside diameter 156mm SKU: 28805001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-50-teeth-tooth-width-19mm-outside-diameter-156mm-sku-28805001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 50 teeth tooth width 19mm outside diameter 156mm SKU: 28805000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-50-teeth-tooth-width-19mm-outside-diameter-156mm-sku-28805000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 45 teeth tooth width 19mm outside diameter 141mm SKU: 28804501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-45-teeth-tooth-width-19mm-outside-diameter-141mm-sku-28804501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 45 teeth tooth width 19mm outside diameter 141mm SKU: 28804500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-45-teeth-tooth-width-19mm-outside-diameter-141mm-sku-28804500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 40 teeth tooth width 19mm outside diameter 126mm SKU: 28804001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-40-teeth-tooth-width-19mm-outside-diameter-126mm-sku-28804001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 40 teeth tooth width 19mm outside diameter 126mm SKU: 28804000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-40-teeth-tooth-width-19mm-outside-diameter-126mm-sku-28804000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 38 teeth tooth width 19mm outside diameter 120mm SKU: 28803801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-38-teeth-tooth-width-19mm-outside-diameter-120mm-sku-28803801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 38 teeth tooth width 19mm outside diameter 120mm SKU: 28803800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-38-teeth-tooth-width-19mm-outside-diameter-120mm-sku-28803800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 35 teeth tooth width 19mm outside diameter 111mm SKU: 28803501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-35-teeth-tooth-width-19mm-outside-diameter-111mm-sku-28803501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 35 teeth tooth width 19mm outside diameter 111mm SKU: 28803500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-35-teeth-tooth-width-19mm-outside-diameter-111mm-sku-28803500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 34 teeth tooth width 19mm outside diameter 108mm SKU: 28803401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-34-teeth-tooth-width-19mm-outside-diameter-108mm-sku-28803401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 34 teeth tooth width 19mm outside diameter 108mm SKU: 28803400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-34-teeth-tooth-width-19mm-outside-diameter-108mm-sku-28803400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 33 teeth tooth width 19mm outside diameter 105mm SKU: 28803301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-33-teeth-tooth-width-19mm-outside-diameter-105mm-sku-28803301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 33 teeth tooth width 19mm outside diameter 105mm SKU: 28803300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-33-teeth-tooth-width-19mm-outside-diameter-105mm-sku-28803300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 32 teeth tooth width 19mm outside diameter 102mm SKU: 28803201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-32-teeth-tooth-width-19mm-outside-diameter-102mm-sku-28803201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 32 teeth tooth width 19mm outside diameter 102mm SKU: 28803200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-32-teeth-tooth-width-19mm-outside-diameter-102mm-sku-28803200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 30 teeth tooth width 19mm outside diameter 96mm SKU: 28803001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-30-teeth-tooth-width-19mm-outside-diameter-96mm-sku-28803001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 30 teeth tooth width 19mm outside diameter 96mm SKU: 28803000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-30-teeth-tooth-width-19mm-outside-diameter-96mm-sku-28803000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 28 teeth tooth width 19mm outside diameter 90mm SKU: 28802801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-28-teeth-tooth-width-19mm-outside-diameter-90mm-sku-28802801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 28 teeth tooth width 19mm outside diameter 90mm SKU: 28802800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-28-teeth-tooth-width-19mm-outside-diameter-90mm-sku-28802800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 27 teeth tooth width 19mm outside diameter 87mm SKU: 28802701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-27-teeth-tooth-width-19mm-outside-diameter-87mm-sku-28802701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 27 teeth tooth width 19mm outside diameter 87mm SKU: 28802700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-27-teeth-tooth-width-19mm-outside-diameter-87mm-sku-28802700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 26 teeth tooth width 19mm outside diameter 84mm SKU: 28802601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-26-teeth-tooth-width-19mm-outside-diameter-84mm-sku-28802601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 26 teeth tooth width 19mm outside diameter 84mm SKU: 28802600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-26-teeth-tooth-width-19mm-outside-diameter-84mm-sku-28802600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 25 teeth tooth width 19mm outside diameter 81mm SKU: 28802501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-25-teeth-tooth-width-19mm-outside-diameter-81mm-sku-28802501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 25 teeth tooth width 19mm outside diameter 81mm SKU: 28802500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-25-teeth-tooth-width-19mm-outside-diameter-81mm-sku-28802500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 24 teeth tooth width 19mm outside diameter 78mm SKU: 28802401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-24-teeth-tooth-width-19mm-outside-diameter-78mm-sku-28802401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 24 teeth tooth width 19mm outside diameter 78mm SKU: 28802400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-24-teeth-tooth-width-19mm-outside-diameter-78mm-sku-28802400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 23 teeth tooth width 19mm outside diameter 75mm SKU: 28802301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-23-teeth-tooth-width-19mm-outside-diameter-75mm-sku-28802301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 23 teeth tooth width 19mm outside diameter 75mm SKU: 28802300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-23-teeth-tooth-width-19mm-outside-diameter-75mm-sku-28802300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 22 teeth tooth width 19mm outside diameter 72mm SKU: 28802201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-22-teeth-tooth-width-19mm-outside-diameter-72mm-sku-28802201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 22 teeth tooth width 19mm outside diameter 72mm SKU: 28802200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-22-teeth-tooth-width-19mm-outside-diameter-72mm-sku-28802200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 21 teeth tooth width 19mm outside diameter 69mm SKU: 28802101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-21-teeth-tooth-width-19mm-outside-diameter-69mm-sku-28802101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 21 teeth tooth width 19mm outside diameter 69mm SKU: 28802100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-21-teeth-tooth-width-19mm-outside-diameter-69mm-sku-28802100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 20 teeth tooth width 19mm outside diameter 66mm SKU: 28802001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-20-teeth-tooth-width-19mm-outside-diameter-66mm-sku-28802001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 20 teeth tooth width 19mm outside diameter 66mm SKU: 28802000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-20-teeth-tooth-width-19mm-outside-diameter-66mm-sku-28802000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 19 teeth tooth width 19mm outside diameter 63mm SKU: 28801901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-19-teeth-tooth-width-19mm-outside-diameter-63mm-sku-28801901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 19 teeth tooth width 19mm outside diameter 63mm SKU: 28801900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-19-teeth-tooth-width-19mm-outside-diameter-63mm-sku-28801900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 18 teeth tooth width 19mm outside diameter 60mm SKU: 28801801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-18-teeth-tooth-width-19mm-outside-diameter-60mm-sku-28801801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 18 teeth tooth width 19mm outside diameter 60mm SKU: 28801800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-18-teeth-tooth-width-19mm-outside-diameter-60mm-sku-28801800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 17 teeth tooth width 19mm outside diameter 57mm SKU: 28801701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-17-teeth-tooth-width-19mm-outside-diameter-57mm-sku-28801701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 17 teeth tooth width 19mm outside diameter 57mm SKU: 28801700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-17-teeth-tooth-width-19mm-outside-diameter-57mm-sku-28801700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 16 teeth tooth width 19mm outside diameter 54mm SKU: 28801601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-16-teeth-tooth-width-19mm-outside-diameter-54mm-sku-28801601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 16 teeth tooth width 19mm outside diameter 54mm SKU: 28801600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-16-teeth-tooth-width-19mm-outside-diameter-54mm-sku-28801600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 15 teeth tooth width 19mm outside diameter 51mm SKU: 28801501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-15-teeth-tooth-width-19mm-outside-diameter-51mm-sku-28801501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 15 teeth tooth width 19mm outside diameter 51mm SKU: 28801500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-15-teeth-tooth-width-19mm-outside-diameter-51mm-sku-28801500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 14 teeth tooth width 19mm outside diameter 48mm SKU: 28801401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-14-teeth-tooth-width-19mm-outside-diameter-48mm-sku-28801401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 14 teeth tooth width 19mm outside diameter 48mm SKU: 28801400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-14-teeth-tooth-width-19mm-outside-diameter-48mm-sku-28801400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 13 teeth tooth width 19mm outside diameter 45mm SKU: 28801301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-13-teeth-tooth-width-19mm-outside-diameter-45mm-sku-28801301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 13 teeth tooth width 19mm outside diameter 45mm SKU: 28801300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-13-teeth-tooth-width-19mm-outside-diameter-45mm-sku-28801300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 12 teeth tooth width 19mm outside diameter 42mm SKU: 28801201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-12-teeth-tooth-width-19mm-outside-diameter-42mm-sku-28801201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 12 teeth tooth width 19mm outside diameter 42mm SKU: 28801200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-12-teeth-tooth-width-19mm-outside-diameter-42mm-sku-28801200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 95 teeth tooth width 19mm outside diameter 242,5mm SKU: 28709501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-95-teeth-tooth-width-19mm-outside-diameter-2425mm-sku-28709501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 95 teeth tooth width 19mm outside diameter 242,5mm SKU: 28709500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-95-teeth-tooth-width-19mm-outside-diameter-2425mm-sku-28709500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 90 teeth tooth width 19mm outside diameter 230mm SKU: 28709001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-90-teeth-tooth-width-19mm-outside-diameter-230mm-sku-28709001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 90 teeth tooth width 19mm outside diameter 230mm SKU: 28709000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-90-teeth-tooth-width-19mm-outside-diameter-230mm-sku-28709000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 85 teeth tooth width 19mm outside diameter 217,5mm SKU: 28708501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-85-teeth-tooth-width-19mm-outside-diameter-2175mm-sku-28708501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 85 teeth tooth width 19mm outside diameter 217,5mm SKU: 28708500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-85-teeth-tooth-width-19mm-outside-diameter-2175mm-sku-28708500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 80 teeth tooth width 19mm outside diameter 205mm SKU: 28708001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-80-teeth-tooth-width-19mm-outside-diameter-205mm-sku-28708001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 80 teeth tooth width 19mm outside diameter 205mm SKU: 28708000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-80-teeth-tooth-width-19mm-outside-diameter-205mm-sku-28708000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 75 teeth tooth width 19mm outside diameter 192,5mm SKU: 28707501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-75-teeth-tooth-width-19mm-outside-diameter-1925mm-sku-28707501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 75 teeth tooth width 19mm outside diameter 192,5mm SKU: 28707500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-75-teeth-tooth-width-19mm-outside-diameter-1925mm-sku-28707500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 70 teeth tooth width 19mm outside diameter 180mm SKU: 28707001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-70-teeth-tooth-width-19mm-outside-diameter-180mm-sku-28707001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 70 teeth tooth width 19mm outside diameter 180mm SKU: 28707000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-70-teeth-tooth-width-19mm-outside-diameter-180mm-sku-28707000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 65 teeth tooth width 19mm outside diameter 167,5mm SKU: 28706501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-65-teeth-tooth-width-19mm-outside-diameter-1675mm-sku-28706501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 65 teeth tooth width 19mm outside diameter 167,5mm SKU: 28706500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-65-teeth-tooth-width-19mm-outside-diameter-1675mm-sku-28706500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of POM with hub module 1 60 teeth tooth width 10mm outside diameter 62mm SKU: 29306000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-60-teeth-tooth-width-10mm-outside-diameter-62mm-sku-29306000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 56 teeth tooth width 10mm outside diameter 58mm SKU: 29305600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-56-teeth-tooth-width-10mm-outside-diameter-58mm-sku-29305600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 55 teeth tooth width 10mm outside diameter 57mm SKU: 29305500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-55-teeth-tooth-width-10mm-outside-diameter-57mm-sku-29305500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 54 teeth tooth width 10mm outside diameter 56mm SKU: 29305400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-54-teeth-tooth-width-10mm-outside-diameter-56mm-sku-29305400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 52 teeth tooth width 10mm outside diameter 54mm SKU: 29305200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-52-teeth-tooth-width-10mm-outside-diameter-54mm-sku-29305200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 50 teeth tooth width 10mm outside diameter 52mm SKU: 29305000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-50-teeth-tooth-width-10mm-outside-diameter-52mm-sku-29305000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 48 teeth tooth width 10mm outside diameter 50mm SKU: 29304800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-48-teeth-tooth-width-10mm-outside-diameter-50mm-sku-29304800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 45 teeth tooth width 10mm outside diameter 47mm SKU: 29304500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-45-teeth-tooth-width-10mm-outside-diameter-47mm-sku-29304500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 42 teeth tooth width 10mm outside diameter 44mm SKU: 29304200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-42-teeth-tooth-width-10mm-outside-diameter-44mm-sku-29304200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 40 teeth tooth width 10mm outside diameter 42mm SKU: 29304000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-40-teeth-tooth-width-10mm-outside-diameter-42mm-sku-29304000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 38 teeth tooth width 10mm outside diameter 40mm SKU: 29303800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-38-teeth-tooth-width-10mm-outside-diameter-40mm-sku-29303800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 36 teeth tooth width 10mm outside diameter 38mm SKU: 29303600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-36-teeth-tooth-width-10mm-outside-diameter-38mm-sku-29303600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 35 teeth tooth width 10mm outside diameter 37mm SKU: 29303500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-35-teeth-tooth-width-10mm-outside-diameter-37mm-sku-29303500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 32 teeth tooth width 10mm outside diameter 34mm SKU: 29303200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-32-teeth-tooth-width-10mm-outside-diameter-34mm-sku-29303200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 30 teeth tooth width 10mm outside diameter 32mm SKU: 29303000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-30-teeth-tooth-width-10mm-outside-diameter-32mm-sku-29303000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 28 teeth tooth width 10mm outside diameter 30mm SKU: 29302800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-28-teeth-tooth-width-10mm-outside-diameter-30mm-sku-29302800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 27 teeth tooth width 10mm outside diameter 29mm SKU: 29302700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-27-teeth-tooth-width-10mm-outside-diameter-29mm-sku-29302700/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 26 teeth tooth width 10mm outside diameter 28mm SKU: 29302600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-26-teeth-tooth-width-10mm-outside-diameter-28mm-sku-29302600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 25 teeth tooth width 10mm outside diameter 27mm SKU: 29302500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-teeth-tooth-width-10mm-outside-diameter-27mm-sku-29302500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 24 teeth tooth width 10mm outside diameter 26mm SKU: 29302400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-24-teeth-tooth-width-10mm-outside-diameter-26mm-sku-29302400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 23 teeth tooth width 10mm outside diameter 25mm SKU: 29302300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-23-teeth-tooth-width-10mm-outside-diameter-25mm-sku-29302300/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 22 teeth tooth width 10mm outside diameter 24mm SKU: 29302200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-22-teeth-tooth-width-10mm-outside-diameter-24mm-sku-29302200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 21 teeth tooth width 10mm outside diameter 23mm SKU: 29302100](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-21-teeth-tooth-width-10mm-outside-diameter-23mm-sku-29302100/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 20 teeth tooth width 10mm outside diameter 22mm SKU: 29302000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-20-teeth-tooth-width-10mm-outside-diameter-22mm-sku-29302000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 19 teeth tooth width 10mm outside diameter 21mm SKU: 29301900](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-19-teeth-tooth-width-10mm-outside-diameter-21mm-sku-29301900/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 18 teeth tooth width 10mm outside diameter 20mm SKU: 29301800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-18-teeth-tooth-width-10mm-outside-diameter-20mm-sku-29301800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 17 teeth tooth width 10mm outside diameter 19mm SKU: 29301700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-17-teeth-tooth-width-10mm-outside-diameter-19mm-sku-29301700/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 16 teeth tooth width 10mm outside diameter 18mm SKU: 29301600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-16-teeth-tooth-width-10mm-outside-diameter-18mm-sku-29301600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 15 teeth tooth width 10mm outside diameter 17mm SKU: 29301500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-15-teeth-tooth-width-10mm-outside-diameter-17mm-sku-29301500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 14 teeth tooth width 10mm outside diameter 16mm SKU: 29301400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-14-teeth-tooth-width-10mm-outside-diameter-16mm-sku-29301400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 13 teeth tooth width 10mm outside diameter 15mm SKU: 29301300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-13-teeth-tooth-width-10mm-outside-diameter-15mm-sku-29301300/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 12 teeth tooth width 10mm outside diameter 14mm SKU: 29301200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-12-teeth-tooth-width-10mm-outside-diameter-14mm-sku-29301200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 11 teeth tooth width 10mm outside diameter 13mm SKU: 29301100](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-11-teeth-tooth-width-10mm-outside-diameter-13mm-sku-29301100/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 10 teeth tooth width 10mm outside diameter 12mm SKU: 29301000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-10-teeth-tooth-width-10mm-outside-diameter-12mm-sku-29301000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 120 teeth tooth width 5mm outside diameter 85.4mm SKU: 29212000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-120-teeth-tooth-width-5mm-outside-diameter-85-4mm-sku-29212000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 114 teeth tooth width 5mm outside diameter 81.2mm SKU: 29211400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-114-teeth-tooth-width-5mm-outside-diameter-81-2mm-sku-29211400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 100 teeth tooth width 5mm outside diameter 71.4mm SKU: 29210000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-100-teeth-tooth-width-5mm-outside-diameter-71-4mm-sku-29210000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 96 teeth tooth width 5mm outside diameter 68.6mm SKU: 29209600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-96-teeth-tooth-width-5mm-outside-diameter-68-6mm-sku-29209600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 90 teeth tooth width 5mm outside diameter 64.4mm SKU: 29209000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-90-teeth-tooth-width-5mm-outside-diameter-64-4mm-sku-29209000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 85 teeth tooth width 5mm outside diameter 60.9mm SKU: 29208500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-85-teeth-tooth-width-5mm-outside-diameter-60-9mm-sku-29208500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 80 teeth tooth width 5mm outside diameter 57.4mm SKU: 29208000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-80-teeth-tooth-width-5mm-outside-diameter-57-4mm-sku-29208000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 75 teeth tooth width 5mm outside diameter 53.9mm SKU: 29207500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-75-teeth-tooth-width-5mm-outside-diameter-53-9mm-sku-29207500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 72 teeth tooth width 5mm outside diameter 51.8mm SKU: 29207200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-72-teeth-tooth-width-5mm-outside-diameter-51-8mm-sku-29207200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 70 teeth tooth width 5mm outside diameter 50.4mm SKU: 29207000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-70-teeth-tooth-width-5mm-outside-diameter-50-4mm-sku-29207000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 65 teeth tooth width 5mm outside diameter 46.9mm SKU: 29206500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-65-teeth-tooth-width-5mm-outside-diameter-46-9mm-sku-29206500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 64 teeth tooth width 5mm outside diameter 46.2mm SKU: 29206400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-64-teeth-tooth-width-5mm-outside-diameter-46-2mm-sku-29206400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 60 teeth tooth width 5mm outside diameter 43.4mm SKU: 29206000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-60-teeth-tooth-width-5mm-outside-diameter-43-4mm-sku-29206000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 56 teeth tooth width 5mm outside diameter 40.6mm SKU: 29205600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-56-teeth-tooth-width-5mm-outside-diameter-40-6mm-sku-29205600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 55 teeth tooth width 5mm outside diameter 39.9mm SKU: 29205500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-55-teeth-tooth-width-5mm-outside-diameter-39-9mm-sku-29205500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 54 teeth tooth width 5mm outside diameter 39.2mm SKU: 29205400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-54-teeth-tooth-width-5mm-outside-diameter-39-2mm-sku-29205400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 52 teeth tooth width 5mm outside diameter 37.8mm SKU: 29205200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-52-teeth-tooth-width-5mm-outside-diameter-37-8mm-sku-29205200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 50 teeth tooth width 5mm outside diameter 36.4mm SKU: 29205000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-50-teeth-tooth-width-5mm-outside-diameter-36-4mm-sku-29205000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 48 teeth tooth width 5mm outside diameter 35mm SKU: 29204800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-48-teeth-tooth-width-5mm-outside-diameter-35mm-sku-29204800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 45 teeth tooth width 5mm outside diameter 32.9mm SKU: 29204500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-45-teeth-tooth-width-5mm-outside-diameter-32-9mm-sku-29204500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 42 teeth tooth width 5mm outside diameter 30.8mm SKU: 29204200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-42-teeth-tooth-width-5mm-outside-diameter-30-8mm-sku-29204200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 40 teeth tooth width 5mm outside diameter 29.4mm SKU: 29204000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-40-teeth-tooth-width-5mm-outside-diameter-29-4mm-sku-29204000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 38 teeth tooth width 5mm outside diameter 28mm SKU: 29203800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-38-teeth-tooth-width-5mm-outside-diameter-28mm-sku-29203800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 36 teeth tooth width 5mm outside diameter 26.6mm SKU: 29203600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-36-teeth-tooth-width-5mm-outside-diameter-26-6mm-sku-29203600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 35 teeth tooth width 5mm outside diameter 25.9mm SKU: 29203500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-35-teeth-tooth-width-5mm-outside-diameter-25-9mm-sku-29203500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 32 teeth tooth width 5mm outside diameter 23.8mm SKU: 29203200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-32-teeth-tooth-width-5mm-outside-diameter-23-8mm-sku-29203200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 30 teeth tooth width 5mm outside diameter 22.4mm SKU: 29203000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-30-teeth-tooth-width-5mm-outside-diameter-22-4mm-sku-29203000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 28 teeth tooth width 5mm outside diameter 21mm SKU: 29202800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-28-teeth-tooth-width-5mm-outside-diameter-21mm-sku-29202800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 27 teeth tooth width 5mm outside diameter 20.3mm SKU: 29202700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-27-teeth-tooth-width-5mm-outside-diameter-20-3mm-sku-29202700/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 26 teeth tooth width 5mm outside diameter 19.6mm SKU: 29202600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-26-teeth-tooth-width-5mm-outside-diameter-19-6mm-sku-29202600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 25 teeth tooth width 5mm outside diameter 18.9mm SKU: 29202500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-25-teeth-tooth-width-5mm-outside-diameter-18-9mm-sku-29202500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 24 teeth tooth width 5mm outside diameter 18.2mm SKU: 29202400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-24-teeth-tooth-width-5mm-outside-diameter-18-2mm-sku-29202400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 23 teeth tooth width 5mm outside diameter 17.5mm SKU: 29202300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-23-teeth-tooth-width-5mm-outside-diameter-17-5mm-sku-29202300/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 22 teeth tooth width 5mm outside diameter 16.8mm SKU: 29202200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-22-teeth-tooth-width-5mm-outside-diameter-16-8mm-sku-29202200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 21 teeth tooth width 5mm outside diameter 16.1mm SKU: 29202100](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-21-teeth-tooth-width-5mm-outside-diameter-16-1mm-sku-29202100/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 20 teeth tooth width 5mm outside diameter 15.4mm SKU: 29202000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-20-teeth-tooth-width-5mm-outside-diameter-15-4mm-sku-29202000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 19 teeth tooth width 5mm outside diameter 14.7mm SKU: 29201900](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-19-teeth-tooth-width-5mm-outside-diameter-14-7mm-sku-29201900/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 18 teeth tooth width 5mm outside diameter 14mm SKU: 29201800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-18-teeth-tooth-width-5mm-outside-diameter-14mm-sku-29201800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 17 teeth tooth width 5mm outside diameter 13.3mm SKU: 29201700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-17-teeth-tooth-width-5mm-outside-diameter-13-3mm-sku-29201700/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 16 teeth tooth width 5mm outside diameter 12.6mm SKU: 29201600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-16-teeth-tooth-width-5mm-outside-diameter-12-6mm-sku-29201600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 15 teeth tooth width 5mm outside diameter 11.9mm SKU: 29201500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-15-teeth-tooth-width-5mm-outside-diameter-11-9mm-sku-29201500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 14 teeth tooth width 5mm outside diameter 11.2mm SKU: 29201400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-14-teeth-tooth-width-5mm-outside-diameter-11-2mm-sku-29201400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 13 teeth tooth width 5mm outside diameter 10.5mm SKU: 29201300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-13-teeth-tooth-width-5mm-outside-diameter-10-5mm-sku-29201300/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 12 teeth tooth width 5mm outside diameter 9.8mm SKU: 29201200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-12-teeth-tooth-width-5mm-outside-diameter-9-8mm-sku-29201200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 10 teeth tooth width 5mm outside diameter 8.4mm SKU: 29201000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-10-teeth-tooth-width-5mm-outside-diameter-8-4mm-sku-29201000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 120 teeth tooth width 4mm outside diameter 61mm SKU: 29112000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-120-teeth-tooth-width-4mm-outside-diameter-61mm-sku-29112000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 114 teeth tooth width 4mm outside diameter 58mm SKU: 29111400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-114-teeth-tooth-width-4mm-outside-diameter-58mm-sku-29111400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 100 teeth tooth width 4mm outside diameter 51mm SKU: 29110000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-100-teeth-tooth-width-4mm-outside-diameter-51mm-sku-29110000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 96 teeth tooth width 4mm outside diameter 49mm SKU: 29109600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-96-teeth-tooth-width-4mm-outside-diameter-49mm-sku-29109600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 90 teeth tooth width 4mm outside diameter 46mm SKU: 29109000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-90-teeth-tooth-width-4mm-outside-diameter-46mm-sku-29109000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 85 teeth tooth width 4mm outside diameter 43.5mm SKU: 29108500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-85-teeth-tooth-width-4mm-outside-diameter-43-5mm-sku-29108500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 80 teeth tooth width 4mm outside diameter 41mm SKU: 29108000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-80-teeth-tooth-width-4mm-outside-diameter-41mm-sku-29108000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 75 teeth tooth width 4mm outside diameter 38.5mm SKU: 29107500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-75-teeth-tooth-width-4mm-outside-diameter-38-5mm-sku-29107500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 72 teeth tooth width 4mm outside diameter 37mm SKU: 29107200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-72-teeth-tooth-width-4mm-outside-diameter-37mm-sku-29107200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 70 teeth tooth width 4mm outside diameter 36mm SKU: 29107000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-70-teeth-tooth-width-4mm-outside-diameter-36mm-sku-29107000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 65 teeth tooth width 4mm outside diameter 33.5mm SKU: 29106500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-65-teeth-tooth-width-4mm-outside-diameter-33-5mm-sku-29106500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 64 teeth tooth width 4mm outside diameter 33mm SKU: 29106400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-64-teeth-tooth-width-4mm-outside-diameter-33mm-sku-29106400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 60 teeth tooth width 4mm outside diameter 31mm SKU: 29106000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-60-teeth-tooth-width-4mm-outside-diameter-31mm-sku-29106000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 56 teeth tooth width 4mm outside diameter 29mm SKU: 29105600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-56-teeth-tooth-width-4mm-outside-diameter-29mm-sku-29105600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 55 teeth tooth width 4mm outside diameter 28.5mm SKU: 29105500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-55-teeth-tooth-width-4mm-outside-diameter-28-5mm-sku-29105500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 54 teeth tooth width 4mm outside diameter 28mm SKU: 29105400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-54-teeth-tooth-width-4mm-outside-diameter-28mm-sku-29105400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 52 teeth tooth width 4mm outside diameter 27mm SKU: 29105200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-52-teeth-tooth-width-4mm-outside-diameter-27mm-sku-29105200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 50 teeth tooth width 4mm outside diameter 26mm SKU: 29105000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-50-teeth-tooth-width-4mm-outside-diameter-26mm-sku-29105000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 48 teeth tooth width 4mm outside diameter 25mm SKU: 29104800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-48-teeth-tooth-width-4mm-outside-diameter-25mm-sku-29104800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 45 teeth tooth width 4mm outside diameter 23.5mm SKU: 29104500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-45-teeth-tooth-width-4mm-outside-diameter-23-5mm-sku-29104500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 42 teeth tooth width 4mm outside diameter 22mm SKU: 29104200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-42-teeth-tooth-width-4mm-outside-diameter-22mm-sku-29104200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 12 teeth tooth width 17mm outer diameter 21mm SKU: 29511012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-12-teeth-tooth-width-17mm-outer-diameter-21mm-sku-29511012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 10 teeth tooth width 17mm outer diameter 18mm SKU: 29511010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-10-teeth-tooth-width-17mm-outer-diameter-18mm-sku-29511010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 100 teeth tooth width 15mm outside diameter 153mm SKU: 29510000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-100-teeth-tooth-width-15mm-outside-diameter-153mm-sku-29510000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 90 teeth tooth width 15mm outside diameter 138mm SKU: 29509000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-90-teeth-tooth-width-15mm-outside-diameter-138mm-sku-29509000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 80 teeth tooth width 15mm outside diameter 123mm SKU: 29508000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-123mm-sku-29508000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1,5 75 teeth tooth width 15mm outside diameter 115,5mm SKU: 29507500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-15-75-teeth-tooth-width-15mm-outside-diameter-1155mm-sku-29507500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1,5 72 teeth tooth width 15mm outside diameter 111mm SKU: 29507200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-15-72-teeth-tooth-width-15mm-outside-diameter-111mm-sku-29507200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 70 teeth tooth width 15mm outside diameter 108mm SKU: 29507000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-108mm-sku-29507000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 65 teeth tooth width 15mm outside diameter 100.5mm SKU: 29506500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-65-teeth-tooth-width-15mm-outside-diameter-100-5mm-sku-29506500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 60 teeth tooth width 15mm outside diameter 93mm SKU: 29506000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-93mm-sku-29506000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 55 teeth tooth width 15mm outside diameter 85.5mm SKU: 29505500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-55-teeth-tooth-width-15mm-outside-diameter-85-5mm-sku-29505500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 50 teeth tooth width 15mm outside diameter 78mm SKU: 29505000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-78mm-sku-29505000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 48 teeth tooth width 15mm outside diameter 75mm SKU: 29504800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-75mm-sku-29504800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 45 teeth tooth width 15mm outside diameter 70.5mm SKU: 29504500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-70-5mm-sku-29504500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 42 teeth tooth width 15mm outside diameter 66mm SKU: 29504200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-42-teeth-tooth-width-15mm-outside-diameter-66mm-sku-29504200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 40 teeth tooth width 15mm outside diameter 63mm SKU: 29504000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-63mm-sku-29504000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 38 teeth tooth width 15mm outside diameter 60mm SKU: 29503800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-38-teeth-tooth-width-15mm-outside-diameter-60mm-sku-29503800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 36 teeth tooth width 15mm outside diameter 57mm SKU: 29503600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-36-teeth-tooth-width-15mm-outside-diameter-57mm-sku-29503600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 35 teeth tooth width 15mm outside diameter 55.5mm SKU: 29503500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-35-teeth-tooth-width-15mm-outside-diameter-55-5mm-sku-29503500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 32 teeth tooth width 15mm outside diameter 51mm SKU: 29503200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-32-teeth-tooth-width-15mm-outside-diameter-51mm-sku-29503200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 30 teeth tooth width 15mm outside diameter 48mm SKU: 29503000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-48mm-sku-29503000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 28 teeth tooth width 15mm outside diameter 45mm SKU: 29502800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-28-teeth-tooth-width-15mm-outside-diameter-45mm-sku-29502800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 25 teeth tooth width 15mm outside diameter 40.5mm SKU: 29502500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-40-5mm-sku-29502500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 24 teeth tooth width 15mm outside diameter 39mm SKU: 29502400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-24-teeth-tooth-width-15mm-outside-diameter-39mm-sku-29502400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 22 teeth tooth width 15mm outside diameter 36mm SKU: 29502200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-22-teeth-tooth-width-15mm-outside-diameter-36mm-sku-29502200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 20 teeth tooth width 15mm outside diameter 33mm SKU: 29502000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-20-teeth-tooth-width-15mm-outside-diameter-33mm-sku-29502000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 18 teeth tooth width 15mm outside diameter 30mm SKU: 29501800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-18-teeth-tooth-width-15mm-outside-diameter-30mm-sku-29501800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 16 teeth tooth width 15mm outside diameter 27mm SKU: 29501600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-16-teeth-tooth-width-15mm-outside-diameter-27mm-sku-29501600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 15 teeth tooth width 15mm outside diameter 25.5mm SKU: 29501500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-15-teeth-tooth-width-15mm-outside-diameter-25-5mm-sku-29501500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 14 teeth tooth width 15mm outside diameter 24mm SKU: 29501400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-14-teeth-tooth-width-15mm-outside-diameter-24mm-sku-29501400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 13 teeth tooth width 15mm outside diameter 22.5mm SKU: 29501300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-13-teeth-tooth-width-15mm-outside-diameter-22-5mm-sku-29501300/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 12 teeth tooth width 15mm outside diameter 21mm SKU: 29501200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-12-teeth-tooth-width-15mm-outside-diameter-21mm-sku-29501200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 10 teeth tooth width 15mm outside diameter 18mm SKU: 29501000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-10-teeth-tooth-width-15mm-outside-diameter-18mm-sku-29501000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 50 teeth tooth width 10mm outside diameter 65mm SKU: 29405000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-50-teeth-tooth-width-10mm-outside-diameter-65mm-sku-29405000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 40 teeth tooth width 10mm outside diameter 52.5mm SKU: 29404000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-40-teeth-tooth-width-10mm-outside-diameter-52-5mm-sku-29404000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 38 teeth tooth width 10mm outside diameter 50mm SKU: 29403800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-38-teeth-tooth-width-10mm-outside-diameter-50mm-sku-29403800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 36 teeth tooth width 10mm outside diameter 47.5mm SKU: 29403600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-36-teeth-tooth-width-10mm-outside-diameter-47-5mm-sku-29403600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 35 teeth tooth width 10mm outside diameter 46.25mm SKU: 29403500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-35-teeth-tooth-width-10mm-outside-diameter-46-25mm-sku-29403500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 32 teeth tooth width 10mm outside diameter 42.5mm SKU: 29403200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-32-teeth-tooth-width-10mm-outside-diameter-42-5mm-sku-29403200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 30 teeth tooth width 10mm outside diameter 40mm SKU: 29403000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-30-teeth-tooth-width-10mm-outside-diameter-40mm-sku-29403000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 25 teeth tooth width 10mm outside diameter 33.75mm SKU: 29402500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-25-teeth-tooth-width-10mm-outside-diameter-33-75mm-sku-29402500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 24 teeth tooth width 10mm outside diameter 32.5mm SKU: 29402400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-24-teeth-tooth-width-10mm-outside-diameter-32-5mm-sku-29402400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 20 teeth tooth width 10mm outside diameter 27.5mm SKU: 29402000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-20-teeth-tooth-width-10mm-outside-diameter-27-5mm-sku-29402000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 18 teeth tooth width 10mm outside diameter 25mm SKU: 29401800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-18-teeth-tooth-width-10mm-outside-diameter-25mm-sku-29401800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 15 teeth tooth width 10mm outside diameter 21.25mm SKU: 29401500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-15-teeth-tooth-width-10mm-outside-diameter-21-25mm-sku-29401500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 14 teeth tooth width 10mm outside diameter 20mm SKU: 29401400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-14-teeth-tooth-width-10mm-outside-diameter-20mm-sku-29401400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 12 teeth tooth width 10mm outside diameter 17.5mm SKU: 29401200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-12-teeth-tooth-width-10mm-outside-diameter-17-5mm-sku-29401200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 10 teeth tooth width 10mm outside diameter 15mm SKU: 29401000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-10-teeth-tooth-width-10mm-outside-diameter-15mm-sku-29401000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 120 teeth tooth width 10mm outside diameter 122mm SKU: 29312000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-120-teeth-tooth-width-10mm-outside-diameter-122mm-sku-29312000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 120 teeth tooth width 15mm outer diameter 122mm SKU: 29311120](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-120-teeth-tooth-width-15mm-outer-diameter-122mm-sku-29311120/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 100 teeth tooth width 15mm outer diameter 102mm SKU: 29311100](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-100-teeth-tooth-width-15mm-outer-diameter-102mm-sku-29311100/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 90 teeth tooth width 15mm outer diameter 92mm SKU: 29311090](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-90-teeth-tooth-width-15mm-outer-diameter-92mm-sku-29311090/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 85 teeth tooth width 15mm outer diameter 87mm SKU: 29311085](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-85-teeth-tooth-width-15mm-outer-diameter-87mm-sku-29311085/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 80 teeth tooth width 15mm outer diameter 82mm SKU: 29311080](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-80-teeth-tooth-width-15mm-outer-diameter-82mm-sku-29311080/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 75 teeth tooth width 15mm outer diameter 77mm SKU: 29311075](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-75-teeth-tooth-width-15mm-outer-diameter-77mm-sku-29311075/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 72 teeth tooth width 15mm outer diameter 74mm SKU: 29311072](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-72-teeth-tooth-width-15mm-outer-diameter-74mm-sku-29311072/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 70 teeth tooth width 15mm outer diameter 72mm SKU: 29311070](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-70-teeth-tooth-width-15mm-outer-diameter-72mm-sku-29311070/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 65 teeth tooth width 15mm outer diameter 67mm SKU: 29311065](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-65-teeth-tooth-width-15mm-outer-diameter-67mm-sku-29311065/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 60 teeth tooth width 15mm outer diameter 62mm SKU: 29311060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-60-teeth-tooth-width-15mm-outer-diameter-62mm-sku-29311060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 56 teeth tooth width 15mm outer diameter 58mm SKU: 29311056](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-56-teeth-tooth-width-15mm-outer-diameter-58mm-sku-29311056/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 55 teeth tooth width 15mm outer diameter 57mm SKU: 29311055](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-55-teeth-tooth-width-15mm-outer-diameter-57mm-sku-29311055/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 52 teeth tooth width 15mm outer diameter 54mm SKU: 29311052](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-52-teeth-tooth-width-15mm-outer-diameter-54mm-sku-29311052/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 50 teeth tooth width 15mm outer diameter 52mm SKU: 29311050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-50-teeth-tooth-width-15mm-outer-diameter-52mm-sku-29311050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 48 teeth tooth width 15mm outer diameter 50mm SKU: 29311048](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-48-teeth-tooth-width-15mm-outer-diameter-50mm-sku-29311048/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 45 teeth tooth width 15mm outer diameter 47mm SKU: 29311045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-45-teeth-tooth-width-15mm-outer-diameter-47mm-sku-29311045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 42 teeth tooth width 15mm outer diameter 44mm SKU: 29311042](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-42-teeth-tooth-width-15mm-outer-diameter-44mm-sku-29311042/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 40 teeth tooth width 15mm outer diameter 42mm SKU: 29311040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-40-teeth-tooth-width-15mm-outer-diameter-42mm-sku-29311040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 38 teeth tooth width 15mm outer diameter 40mm SKU: 29311038](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-38-teeth-tooth-width-15mm-outer-diameter-40mm-sku-29311038/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 36 teeth tooth width 15mm outer diameter 38mm SKU: 29311036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-36-teeth-tooth-width-15mm-outer-diameter-38mm-sku-29311036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 35 teeth tooth width 15mm outer diameter 37mm SKU: 29311035](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-35-teeth-tooth-width-15mm-outer-diameter-37mm-sku-29311035/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 32 teeth tooth width 15mm outer diameter 34mm SKU: 29311032](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-32-teeth-tooth-width-15mm-outer-diameter-34mm-sku-29311032/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 30 teeth tooth width 15mm outer diameter 32mm SKU: 29311030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-30-teeth-tooth-width-15mm-outer-diameter-32mm-sku-29311030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 28 teeth tooth width 15mm outer diameter 30mm SKU: 29311028](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-28-teeth-tooth-width-15mm-outer-diameter-30mm-sku-29311028/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 27 teeth tooth width 15mm outer diameter 29mm SKU: 29311027](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-27-teeth-tooth-width-15mm-outer-diameter-29mm-sku-29311027/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 26 teeth tooth width 15mm outer diameter 28mm SKU: 29311026](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-26-teeth-tooth-width-15mm-outer-diameter-28mm-sku-29311026/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 25 teeth tooth width 15mm outer diameter 27mm SKU: 29311025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-25-teeth-tooth-width-15mm-outer-diameter-27mm-sku-29311025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 24 teeth tooth width 15mm outer diameter 26mm SKU: 29311024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-24-teeth-tooth-width-15mm-outer-diameter-26mm-sku-29311024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 23 teeth tooth width 15mm outer diameter 25mm SKU: 29311023](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-23-teeth-tooth-width-15mm-outer-diameter-25mm-sku-29311023/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 22 teeth tooth width 15mm outer diameter 24mm SKU: 29311022](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-22-teeth-tooth-width-15mm-outer-diameter-24mm-sku-29311022/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 21 teeth tooth width 15mm outer diameter 23mm SKU: 29311021](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-21-teeth-tooth-width-15mm-outer-diameter-23mm-sku-29311021/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 20 teeth tooth width 15mm outer diameter 22mm SKU: 29311020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-20-teeth-tooth-width-15mm-outer-diameter-22mm-sku-29311020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 19 teeth tooth width 15mm outer diameter 21mm SKU: 29311019](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-19-teeth-tooth-width-15mm-outer-diameter-21mm-sku-29311019/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 18 teeth tooth width 15mm outer diameter 20mm SKU: 29311018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-18-teeth-tooth-width-15mm-outer-diameter-20mm-sku-29311018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 17 teeth tooth width 15mm outer diameter 19mm SKU: 29311017](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-17-teeth-tooth-width-15mm-outer-diameter-19mm-sku-29311017/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 16 teeth tooth width 15mm outer diameter 18mm SKU: 29311016](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-16-teeth-tooth-width-15mm-outer-diameter-18mm-sku-29311016/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 15 teeth tooth width 15mm outer diameter 17mm SKU: 29311015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-15-teeth-tooth-width-15mm-outer-diameter-17mm-sku-29311015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 14 teeth tooth width 15mm outer diameter 16mm SKU: 29311014](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-14-teeth-tooth-width-15mm-outer-diameter-16mm-sku-29311014/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 13 teeth tooth width 15mm outer diameter 15mm SKU: 29311013](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-13-teeth-tooth-width-15mm-outer-diameter-15mm-sku-29311013/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 12 teeth tooth width 15mm outer diameter 14mm SKU: 29311012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-12-teeth-tooth-width-15mm-outer-diameter-14mm-sku-29311012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 10 teeth tooth width 15mm outer diameter 12mm SKU: 29311010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-10-teeth-tooth-width-15mm-outer-diameter-12mm-sku-29311010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 100 teeth tooth width 10mm outside diameter 102mm SKU: 29310000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-100-teeth-tooth-width-10mm-outside-diameter-102mm-sku-29310000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 96 teeth tooth width 10mm outside diameter 98mm SKU: 29309600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-96-teeth-tooth-width-10mm-outside-diameter-98mm-sku-29309600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 90 teeth tooth width 10mm outside diameter 92mm SKU: 29309000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-90-teeth-tooth-width-10mm-outside-diameter-92mm-sku-29309000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 85 teeth tooth width 10mm outside diameter 87mm SKU: 29308500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-85-teeth-tooth-width-10mm-outside-diameter-87mm-sku-29308500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 80 teeth tooth width 10mm outside diameter 82mm SKU: 29308000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-80-teeth-tooth-width-10mm-outside-diameter-82mm-sku-29308000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 75 teeth tooth width 10mm outside diameter 77mm SKU: 29307500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-75-teeth-tooth-width-10mm-outside-diameter-77mm-sku-29307500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 72 teeth tooth width 10mm outside diameter 74mm SKU: 29307200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-72-teeth-tooth-width-10mm-outside-diameter-74mm-sku-29307200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 70 teeth tooth width 10mm outside diameter 72mm SKU: 29307000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-70-teeth-tooth-width-10mm-outside-diameter-72mm-sku-29307000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 65 teeth tooth width 10mm outside diameter 67mm SKU: 29306500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-65-teeth-tooth-width-10mm-outside-diameter-67mm-sku-29306500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 64 teeth tooth width 10mm outside diameter 66mm SKU: 29306400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-64-teeth-tooth-width-10mm-outside-diameter-66mm-sku-29306400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 12 teeth tooth width 25mm outer diameter 35mm SKU: 29711012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-12-teeth-tooth-width-25mm-outer-diameter-35mm-sku-29711012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 10 teeth tooth width 25mm outer diameter 30mm SKU: 29711010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-10-teeth-tooth-width-25mm-outer-diameter-30mm-sku-29711010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 100 teeth tooth width 20mm outside diameter 255mm SKU: 29710000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-100-teeth-tooth-width-20mm-outside-diameter-255mm-sku-29710000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 90 teeth tooth width 20mm outside diameter 230mm SKU: 29709000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-90-teeth-tooth-width-20mm-outside-diameter-230mm-sku-29709000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 80 teeth tooth width 20mm outside diameter 205mm SKU: 29708000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-80-teeth-tooth-width-20mm-outside-diameter-205mm-sku-29708000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 72 teeth tooth width 20mm outside diameter 185mm SKU: 29707200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-72-teeth-tooth-width-20mm-outside-diameter-185mm-sku-29707200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 60 teeth tooth width 20mm outside diameter 155mm SKU: 29706000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-60-teeth-tooth-width-20mm-outside-diameter-155mm-sku-29706000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 56 teeth tooth width 20mm outside diameter 145mm SKU: 29705600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-56-teeth-tooth-width-20mm-outside-diameter-145mm-sku-29705600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 50 teeth tooth width 20mm outside diameter 130mm SKU: 29705000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-50-teeth-tooth-width-20mm-outside-diameter-130mm-sku-29705000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 45 teeth tooth width 20mm outside diameter 117.5mm SKU: 29704500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-45-teeth-tooth-width-20mm-outside-diameter-117-5mm-sku-29704500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 40 teeth tooth width 20mm outside diameter 105mm SKU: 29704000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-40-teeth-tooth-width-20mm-outside-diameter-105mm-sku-29704000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 36 teeth tooth width 20mm outside diameter 95mm SKU: 29703600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-36-teeth-tooth-width-20mm-outside-diameter-95mm-sku-29703600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 35 teeth tooth width 20mm outside diameter 92,5mm SKU: 29703500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-35-teeth-tooth-width-20mm-outside-diameter-925mm-sku-29703500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 30 teeth tooth width 20mm outside diameter 80mm SKU: 29703000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-30-teeth-tooth-width-20mm-outside-diameter-80mm-sku-29703000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 28 teeth tooth width 20mm outside diameter 75mm SKU: 29702800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-28-teeth-tooth-width-20mm-outside-diameter-75mm-sku-29702800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm SKU: 29702500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-25-teeth-tooth-width-20mm-outside-diameter-67-5mm-sku-29702500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 24 teeth tooth width 20mm outside diameter 65mm SKU: 29702400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-24-teeth-tooth-width-20mm-outside-diameter-65mm-sku-29702400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 20 teeth tooth width 20mm outside diameter 55mm SKU: 29702000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-20-teeth-tooth-width-20mm-outside-diameter-55mm-sku-29702000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 18 teeth tooth width 20mm outside diameter 50mm SKU: 29701800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-18-teeth-tooth-width-20mm-outside-diameter-50mm-sku-29701800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 16 teeth tooth width 20mm outside diameter 45mm SKU: 29701600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-16-teeth-tooth-width-20mm-outside-diameter-45mm-sku-29701600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 15 teeth tooth width 20mm outside diameter 42.5mm SKU: 29701500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-15-teeth-tooth-width-20mm-outside-diameter-42-5mm-sku-29701500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 14 teeth tooth width 20mm outside diameter 40mm SKU: 29701400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-14-teeth-tooth-width-20mm-outside-diameter-40mm-sku-29701400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 12 teeth tooth width 20mm outside diameter 35mm SKU: 29701200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-12-teeth-tooth-width-20mm-outside-diameter-35mm-sku-29701200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 10 teeth tooth width 20mm outside diameter 30mm SKU: 29701000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-10-teeth-tooth-width-20mm-outside-diameter-30mm-sku-29701000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 120 teeth tooth width 16mm outside diameter 244mm SKU: 29612000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-120-teeth-tooth-width-16mm-outside-diameter-244mm-sku-29612000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 90 teeth tooth width 20mm outer diameter 184mm SKU: 29611090](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-90-teeth-tooth-width-20mm-outer-diameter-184mm-sku-29611090/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 80 teeth tooth width 20mm outer diameter 164mm SKU: 29611080](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-80-teeth-tooth-width-20mm-outer-diameter-164mm-sku-29611080/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 72 teeth tooth width 20mm outer diameter 148mm SKU: 29611072](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-72-teeth-tooth-width-20mm-outer-diameter-148mm-sku-29611072/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 70 teeth tooth width 20mm outer diameter 144mm SKU: 29611070](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-70-teeth-tooth-width-20mm-outer-diameter-144mm-sku-29611070/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 60 teeth tooth width 20mm outer diameter 124mm SKU: 29611060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-60-teeth-tooth-width-20mm-outer-diameter-124mm-sku-29611060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 50 teeth tooth width 20mm outer diameter 104mm SKU: 29611050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-50-teeth-tooth-width-20mm-outer-diameter-104mm-sku-29611050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 45 teeth tooth width 20mm outer diameter 94mm SKU: 29611045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-45-teeth-tooth-width-20mm-outer-diameter-94mm-sku-29611045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 40 teeth tooth width 20mm outer diameter 84mm SKU: 29611040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-40-teeth-tooth-width-20mm-outer-diameter-84mm-sku-29611040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 36 teeth tooth width 20mm outer diameter 76mm SKU: 29611036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-36-teeth-tooth-width-20mm-outer-diameter-76mm-sku-29611036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 35 teeth tooth width 20mm outer diameter 74mm SKU: 29611035](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-35-teeth-tooth-width-20mm-outer-diameter-74mm-sku-29611035/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 32 teeth tooth width 20mm outer diameter 68mm SKU: 29611032](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-32-teeth-tooth-width-20mm-outer-diameter-68mm-sku-29611032/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 30 teeth tooth width 20mm outer diameter 64mm SKU: 29611030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-30-teeth-tooth-width-20mm-outer-diameter-64mm-sku-29611030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 25 teeth tooth width 20mm outer diameter 54mm SKU: 29611025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-25-teeth-tooth-width-20mm-outer-diameter-54mm-sku-29611025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 24 teeth tooth width 20mm outer diameter 52mm SKU: 29611024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-24-teeth-tooth-width-20mm-outer-diameter-52mm-sku-29611024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 20 teeth tooth width 20mm outer diameter 44mm SKU: 29611020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-20-teeth-tooth-width-20mm-outer-diameter-44mm-sku-29611020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 18 teeth tooth width 20mm outer diameter 40mm SKU: 29611018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-18-teeth-tooth-width-20mm-outer-diameter-40mm-sku-29611018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 16 teeth tooth width 20mm outer diameter 36mm SKU: 29611016](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-16-teeth-tooth-width-20mm-outer-diameter-36mm-sku-29611016/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 15 teeth tooth width 20mm outer diameter 34mm SKU: 29611015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-15-teeth-tooth-width-20mm-outer-diameter-34mm-sku-29611015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 14 teeth tooth width 20mm outer diameter 32mm SKU: 29611014](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-14-teeth-tooth-width-20mm-outer-diameter-32mm-sku-29611014/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 12 teeth tooth width 20mm outer diameter 28mm SKU: 29611012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-12-teeth-tooth-width-20mm-outer-diameter-28mm-sku-29611012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 10 teeth tooth width 20mm outer diameter 24mm SKU: 29611010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-10-teeth-tooth-width-20mm-outer-diameter-24mm-sku-29611010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 100 teeth tooth width 16mm outside diameter 204mm SKU: 29610000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-100-teeth-tooth-width-16mm-outside-diameter-204mm-sku-29610000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 90 teeth tooth width 16mm outside diameter 184mm SKU: 29609000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-90-teeth-tooth-width-16mm-outside-diameter-184mm-sku-29609000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 80 teeth tooth width 16mm outside diameter 164mm SKU: 29608000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-80-teeth-tooth-width-16mm-outside-diameter-164mm-sku-29608000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 75 teeth tooth width 16mm outside diameter 154mm SKU: 29607500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-75-teeth-tooth-width-16mm-outside-diameter-154mm-sku-29607500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 72 teeth tooth width 16mm outside diameter 148mm SKU: 29607200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-72-teeth-tooth-width-16mm-outside-diameter-148mm-sku-29607200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 70 teeth tooth width 16mm outside diameter 144mm SKU: 29607000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-70-teeth-tooth-width-16mm-outside-diameter-144mm-sku-29607000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 60 teeth tooth width 16mm outside diameter 124mm SKU: 29606000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-60-teeth-tooth-width-16mm-outside-diameter-124mm-sku-29606000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 56 teeth tooth width 16mm outside diameter 116mm SKU: 29605600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-56-teeth-tooth-width-16mm-outside-diameter-116mm-sku-29605600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 50 teeth tooth width 16mm outside diameter 104mm SKU: 29605000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-50-teeth-tooth-width-16mm-outside-diameter-104mm-sku-29605000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 45 teeth tooth width 16mm outside diameter 94mm SKU: 29604500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-45-teeth-tooth-width-16mm-outside-diameter-94mm-sku-29604500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 40 teeth tooth width 16mm outside diameter 84mm SKU: 29604000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-40-teeth-tooth-width-16mm-outside-diameter-84mm-sku-29604000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 36 teeth tooth width 16mm outside diameter 76mm SKU: 29603600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-36-teeth-tooth-width-16mm-outside-diameter-76mm-sku-29603600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 35 teeth tooth width 16mm outside diameter 74mm SKU: 29603500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-35-teeth-tooth-width-16mm-outside-diameter-74mm-sku-29603500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 32 teeth tooth width 16mm outside diameter 68mm SKU: 29603200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-32-teeth-tooth-width-16mm-outside-diameter-68mm-sku-29603200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 30 teeth tooth width 16mm outside diameter 64mm SKU: 29603000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-30-teeth-tooth-width-16mm-outside-diameter-64mm-sku-29603000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 28 teeth tooth width 16mm outside diameter 60mm SKU: 29602800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-28-teeth-tooth-width-16mm-outside-diameter-60mm-sku-29602800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 25 teeth tooth width 16mm outside diameter 54mm SKU: 29602500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-25-teeth-tooth-width-16mm-outside-diameter-54mm-sku-29602500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 24 teeth tooth width 16mm outside diameter 52mm SKU: 29602400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-24-teeth-tooth-width-16mm-outside-diameter-52mm-sku-29602400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 20 teeth tooth width 16mm outside diameter 44mm SKU: 29602000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-20-teeth-tooth-width-16mm-outside-diameter-44mm-sku-29602000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 18 teeth tooth width 16mm outside diameter 40mm SKU: 29601800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-18-teeth-tooth-width-16mm-outside-diameter-40mm-sku-29601800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 16 teeth tooth width 16mm outside diameter 36mm SKU: 29601600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-16-teeth-tooth-width-16mm-outside-diameter-36mm-sku-29601600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 15 teeth tooth width 16mm outside diameter 34mm SKU: 29601500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-15-teeth-tooth-width-16mm-outside-diameter-34mm-sku-29601500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 14 teeth tooth width 16mm outside diameter 32mm SKU: 29601400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-14-teeth-tooth-width-16mm-outside-diameter-32mm-sku-29601400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 12 teeth tooth width 16mm outside diameter 28mm SKU: 29601200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-12-teeth-tooth-width-16mm-outside-diameter-28mm-sku-29601200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 10 teeth tooth width 16mm outside diameter 24mm SKU: 29601000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-10-teeth-tooth-width-16mm-outside-diameter-24mm-sku-29601000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 120 teeth tooth width 15mm outside diameter 183mm SKU: 29512000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-120-teeth-tooth-width-15mm-outside-diameter-183mm-sku-29512000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 120 teeth tooth width 17mm outer diameter 183mm SKU: 29511120](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-120-teeth-tooth-width-17mm-outer-diameter-183mm-sku-29511120/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 100 teeth tooth width 17mm outer diameter 153mm SKU: 29511100](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-100-teeth-tooth-width-17mm-outer-diameter-153mm-sku-29511100/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 90 teeth tooth width 17mm outer diameter 138mm SKU: 29511090](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-90-teeth-tooth-width-17mm-outer-diameter-138mm-sku-29511090/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 80 teeth tooth width 17mm outer diameter 123mm SKU: 29511080](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-80-teeth-tooth-width-17mm-outer-diameter-123mm-sku-29511080/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 72 teeth tooth width 17mm outer diameter 111mm SKU: 29511072](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-72-teeth-tooth-width-17mm-outer-diameter-111mm-sku-29511072/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 70 teeth tooth width 17mm outer diameter 108mm SKU: 29511070](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-70-teeth-tooth-width-17mm-outer-diameter-108mm-sku-29511070/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 60 teeth tooth width 17mm outer diameter 93mm SKU: 29511060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-60-teeth-tooth-width-17mm-outer-diameter-93mm-sku-29511060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 56 teeth tooth width 17mm outer diameter 87mm SKU: 29511056](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-56-teeth-tooth-width-17mm-outer-diameter-87mm-sku-29511056/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 55 teeth tooth width 17mm outer diameter 85,5mm SKU: 29511055](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-55-teeth-tooth-width-17mm-outer-diameter-855mm-sku-29511055/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 50 teeth tooth width 17mm outer diameter 78mm SKU: 29511050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-50-teeth-tooth-width-17mm-outer-diameter-78mm-sku-29511050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 48 teeth tooth width 17mm outer diameter 75mm SKU: 29511048](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-48-teeth-tooth-width-17mm-outer-diameter-75mm-sku-29511048/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 45 teeth tooth width 17mm outer diameter 70,5mm SKU: 29511045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-45-teeth-tooth-width-17mm-outer-diameter-705mm-sku-29511045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 42 teeth tooth width 17mm outer diameter 66mm SKU: 29511042](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-42-teeth-tooth-width-17mm-outer-diameter-66mm-sku-29511042/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 40 teeth tooth width 17mm outer diameter 63mm SKU: 29511040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-40-teeth-tooth-width-17mm-outer-diameter-63mm-sku-29511040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 38 teeth tooth width 17mm outer diameter 60mm SKU: 29511038](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-38-teeth-tooth-width-17mm-outer-diameter-60mm-sku-29511038/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 36 teeth tooth width 17mm outer diameter 57mm SKU: 29511036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-36-teeth-tooth-width-17mm-outer-diameter-57mm-sku-29511036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 35 teeth tooth width 17mm outer diameter 55,5mm SKU: 29511035](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-35-teeth-tooth-width-17mm-outer-diameter-555mm-sku-29511035/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 32 teeth tooth width 17mm outer diameter 51mm SKU: 29511032](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-32-teeth-tooth-width-17mm-outer-diameter-51mm-sku-29511032/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 30 teeth tooth width 17mm outer diameter 48mm SKU: 29511030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-30-teeth-tooth-width-17mm-outer-diameter-48mm-sku-29511030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 28 teeth tooth width 17mm outer diameter 45mm SKU: 29511028](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-28-teeth-tooth-width-17mm-outer-diameter-45mm-sku-29511028/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 25 teeth tooth width 17mm outer diameter 40,5mm SKU: 29511025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-25-teeth-tooth-width-17mm-outer-diameter-405mm-sku-29511025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 24 teeth tooth width 17mm outer diameter 39mm SKU: 29511024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-24-teeth-tooth-width-17mm-outer-diameter-39mm-sku-29511024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 22 teeth tooth width 17mm outer diameter 36mm SKU: 29511022](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-22-teeth-tooth-width-17mm-outer-diameter-36mm-sku-29511022/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 20 teeth tooth width 17mm outer diameter 33mm SKU: 29511020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-20-teeth-tooth-width-17mm-outer-diameter-33mm-sku-29511020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 18 teeth tooth width 17mm outer diameter 30mm SKU: 29511018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-18-teeth-tooth-width-17mm-outer-diameter-30mm-sku-29511018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 16 teeth tooth width 17mm outer diameter 27mm SKU: 29511016](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-16-teeth-tooth-width-17mm-outer-diameter-27mm-sku-29511016/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 15 teeth tooth width 17mm outer diameter 25,5mm SKU: 29511015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-15-teeth-tooth-width-17mm-outer-diameter-255mm-sku-29511015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 14 teeth tooth width 17mm outer diameter 24mm SKU: 29511014](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-14-teeth-tooth-width-17mm-outer-diameter-24mm-sku-29511014/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Bevel gear made of steel module 1 40 teeth i=1:1 milled SKU: 36052600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-40-teeth-i11-milled-sku-36052600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 30 teeth i=1:1 milled SKU: 36052000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-30-teeth-i11-milled-sku-36052000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 26 teeth i=1:1 milled SKU: 36051800](https://maedler.in/product/bevel-gear-made-of-steel-module-1-26-teeth-i11-milled-sku-36051800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 22 teeth i=1:1 milled SKU: 36051300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-22-teeth-i11-milled-sku-36051300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 20 teeth i=1:1 milled SKU: 36051100](https://maedler.in/product/bevel-gear-made-of-steel-module-1-20-teeth-i11-milled-sku-36051100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 19 teeth i=1:1 milled SKU: 36051000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-19-teeth-i11-milled-sku-36051000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 16 teeth i=1:1 milled SKU: 36050700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-16-teeth-i11-milled-sku-36050700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 12 teeth i=1:1 milled SKU: 36050300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-12-teeth-i11-milled-sku-36050300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 45 teeth i=3:1 milled SKU: 36027700](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-45-teeth-i31-milled-sku-36027700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 15 teeth i=3:1 milled SKU: 36027600](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-15-teeth-i31-milled-sku-36027600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 50 teeth i=2:5 milled SKU: 36027300](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-50-teeth-i25-milled-sku-36027300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 20 teeth i=2:5 milled SKU: 36027200](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-20-teeth-i25-milled-sku-36027200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 40 teeth i=2:1 milled SKU: 36026100](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-40-teeth-i21-milled-sku-36026100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 20 teeth i=2:1 milled SKU: 36026000](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-20-teeth-i21-milled-sku-36026000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 30 teeth i=1:5 milled SKU: 36025300](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-30-teeth-i15-milled-sku-36025300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 20 teeth i=1:5 milled SKU: 36025200](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-20-teeth-i15-milled-sku-36025200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 50 teeth i=1:1 milled SKU: 36023200](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-50-teeth-i11-milled-sku-36023200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 40 teeth i=1:1 milled SKU: 36022600](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-40-teeth-i11-milled-sku-36022600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 36 teeth i=1:1 milled SKU: 36022300](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-36-teeth-i11-milled-sku-36022300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 30 teeth i=1:1 milled SKU: 36022000](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-30-teeth-i11-milled-sku-36022000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 24 teeth i=1:1 milled SKU: 36021500](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-24-teeth-i11-milled-sku-36021500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 20 teeth i=1:1 milled SKU: 36021100](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-20-teeth-i11-milled-sku-36021100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Worm shaft made of steel C45 module 5 single-thread, right SKU: 31060100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-5-single-thread-right-sku-31060100/): Material: Steel C45, whirled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 5 single-thread right hand SKU: 31060000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-5-single-thread-right-hand-sku-31060000/): Material: Steel C45, whirled. Single-thread worms to be paired with single-thread worm gears of the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel C45 module 4 double-thread right hand SKU: 31050100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-4-double-thread-right-hand-sku-31050100/): Material: Steel C45, whirled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 4 double-thread right hand SKU: 31050000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-4-double-thread-right-hand-sku-31050000/): Material: Steel C45, whirled. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel C45 module 4 single-thread right hand SKU: 31030100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-4-single-thread-right-hand-sku-31030100/): Material: Steel C45, whirled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 4 single-thread right hand SKU: 31030000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-4-single-thread-right-hand-sku-31030000/): Material: Steel C45, whirled. Single-thread worms to be paired with single-thread worm gears of the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel C45 module 3 double-thread right hand SKU: 31020100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-3-double-thread-right-hand-sku-31020100/): Material: Steel C45, whirled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 3 double-thread right hand SKU: 31020000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-3-double-thread-right-hand-sku-31020000/): Material: Steel C45, whirled. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel C45 module 3 single-thread right hand SKU: 31000100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-3-single-thread-right-hand-sku-31000100/): Material: Steel C45, whirled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 3 single-thread right hand SKU: 31000000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-3-single-thread-right-hand-sku-31000000/): Material: Steel C45, whirled. Single-thread worms to be paired with single-thread worm gears of the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 2 double-thread right hand SKU: 30150100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-2-double-thread-right-hand-sku-30150100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 2 double-thread right hand SKU: 30150000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-2-double-thread-right-hand-sku-30150000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 2 single-thread right hand SKU: 30130100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-2-single-thread-right-hand-sku-30130100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 2 single-thread right hand SKU: 30130000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-2-single-thread-right-hand-sku-30130000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 1,5, double-thread right hand SKU: 30120100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-15-double-thread-right-hand-sku-30120100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 1.5 double-thread right hand SKU: 30120000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-1-5-double-thread-right-hand-sku-30120000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 1.5 single-thread right hand SKU: 30100100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-1-5-single-thread-right-hand-sku-30100100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 1.5 single-thread right hand SKU: 30100000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-1-5-single-thread-right-hand-sku-30100000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 1 double-thread right hand SKU: 30080100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-1-double-thread-right-hand-sku-30080100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 1 double-thread right hand SKU: 30080000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-1-double-thread-right-hand-sku-30080000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 1 single-thread right hand SKU: 30060100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-1-single-thread-right-hand-sku-30060100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 1 single-thread right hand SKU: 30060000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-1-single-thread-right-hand-sku-30060000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 0.75 double-thread right hand SKU: 30050100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-0-75-double-thread-right-hand-sku-30050100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 0.75 double-thread right hand SKU: 30050000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-0-75-double-thread-right-hand-sku-30050000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 0.75 single-thread right hand SKU: 30030100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-0-75-single-thread-right-hand-sku-30030100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 0.75 single-thread right hand SKU: 30030000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-0-75-single-thread-right-hand-sku-30030000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 0.5 double-thread right hand SKU: 30020100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-0-5-double-thread-right-hand-sku-30020100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 0.5 double-thread right hand SKU: 30020000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-0-5-double-thread-right-hand-sku-30020000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 0.5 single-thread right hand SKU: 30000100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-0-5-single-thread-right-hand-sku-30000100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 0.5 single-thread right hand SKU: 30000000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-0-5-single-thread-right-hand-sku-30000000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [spur gear POM black with hub module 3 60 teeth tooth width 30mm outer diameter 186mm SKU: 29811060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-60-teeth-tooth-width-30mm-outer-diameter-186mm-sku-29811060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 50 teeth tooth width 30mm outer diameter 156mm SKU: 29811050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-50-teeth-tooth-width-30mm-outer-diameter-156mm-sku-29811050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 48 teeth tooth width 30mm outer diameter 150mm SKU: 29811048](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-48-teeth-tooth-width-30mm-outer-diameter-150mm-sku-29811048/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 45 teeth tooth width 30mm outer diameter 141mm SKU: 29811045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-45-teeth-tooth-width-30mm-outer-diameter-141mm-sku-29811045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 40 teeth tooth width 30mm outer diameter 126mm SKU: 29811040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-40-teeth-tooth-width-30mm-outer-diameter-126mm-sku-29811040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 36 teeth tooth width 30mm outer diameter 114mm SKU: 29811036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-36-teeth-tooth-width-30mm-outer-diameter-114mm-sku-29811036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 35 teeth tooth width 30mm outer diameter 111mm SKU: 29811035](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-35-teeth-tooth-width-30mm-outer-diameter-111mm-sku-29811035/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 30 teeth tooth width 30mm outer diameter 96mm SKU: 29811030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-30-teeth-tooth-width-30mm-outer-diameter-96mm-sku-29811030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 28 teeth tooth width 30mm outer diameter 90mm SKU: 29811028](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-28-teeth-tooth-width-30mm-outer-diameter-90mm-sku-29811028/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 25 teeth tooth width 30mm outer diameter 81mm SKU: 29811025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-25-teeth-tooth-width-30mm-outer-diameter-81mm-sku-29811025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 24 teeth tooth width 30mm outer diameter 78mm SKU: 29811024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-24-teeth-tooth-width-30mm-outer-diameter-78mm-sku-29811024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 20 teeth tooth width 30mm outer diameter 66mm SKU: 29811020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-20-teeth-tooth-width-30mm-outer-diameter-66mm-sku-29811020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 18 teeth tooth width 30mm outer diameter 60mm SKU: 29811018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-18-teeth-tooth-width-30mm-outer-diameter-60mm-sku-29811018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 15 teeth tooth width 30mm outer diameter 51mm SKU: 29811015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-15-teeth-tooth-width-30mm-outer-diameter-51mm-sku-29811015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 14 teeth tooth width 30mm outer diameter 48mm SKU: 29811014](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-14-teeth-tooth-width-30mm-outer-diameter-48mm-sku-29811014/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 12 teeth tooth width 30mm outer diameter 42mm SKU: 29811012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-12-teeth-tooth-width-30mm-outer-diameter-42mm-sku-29811012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 10 teeth tooth width 30mm outer diameter 36mm SKU: 29811010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-10-teeth-tooth-width-30mm-outer-diameter-36mm-sku-29811010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 60 teeth tooth width 25mm outside diameter 186mm SKU: 29806000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-60-teeth-tooth-width-25mm-outside-diameter-186mm-sku-29806000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 56 teeth tooth width 25mm outside diameter 174mm SKU: 29805600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-56-teeth-tooth-width-25mm-outside-diameter-174mm-sku-29805600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 50 teeth tooth width 25mm outside diameter 156mm SKU: 29805000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-50-teeth-tooth-width-25mm-outside-diameter-156mm-sku-29805000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 48 teeth tooth width 25mm outside diameter 150mm SKU: 29804800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-48-teeth-tooth-width-25mm-outside-diameter-150mm-sku-29804800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 45 teeth tooth width 25mm outside diameter 141mm SKU: 29804500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-45-teeth-tooth-width-25mm-outside-diameter-141mm-sku-29804500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 40 teeth tooth width 25mm outside diameter 126mm SKU: 29804000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-40-teeth-tooth-width-25mm-outside-diameter-126mm-sku-29804000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 36 teeth tooth width 25mm outside diameter 114mm SKU: 29803600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-36-teeth-tooth-width-25mm-outside-diameter-114mm-sku-29803600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 35 teeth tooth width 25mm outside diameter 111mm SKU: 29803500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-35-teeth-tooth-width-25mm-outside-diameter-111mm-sku-29803500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 30 teeth tooth width 25mm outside diameter 96mm SKU: 29803000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-30-teeth-tooth-width-25mm-outside-diameter-96mm-sku-29803000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 28 teeth tooth width 25mm outside diameter 90mm SKU: 29802800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-28-teeth-tooth-width-25mm-outside-diameter-90mm-sku-29802800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 25 teeth tooth width 25mm outside diameter 81mm SKU: 29802500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-25-teeth-tooth-width-25mm-outside-diameter-81mm-sku-29802500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 24 teeth tooth width 25mm outside diameter 78mm SKU: 29802400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-24-teeth-tooth-width-25mm-outside-diameter-78mm-sku-29802400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 20 teeth tooth width 25mm outside diameter 66mm SKU: 29802000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-20-teeth-tooth-width-25mm-outside-diameter-66mm-sku-29802000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 18 teeth tooth width 25mm outside diameter 60mm SKU: 29801800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-18-teeth-tooth-width-25mm-outside-diameter-60mm-sku-29801800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 15 teeth tooth width 25mm outside diameter 51mm SKU: 29801500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-15-teeth-tooth-width-25mm-outside-diameter-51mm-sku-29801500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 14 teeth tooth width 25mm outside diameter 48mm SKU: 29801400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-14-teeth-tooth-width-25mm-outside-diameter-48mm-sku-29801400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 12 teeth tooth width 25mm outside diameter 42mm SKU: 29801200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-12-teeth-tooth-width-25mm-outside-diameter-42mm-sku-29801200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 10 teeth tooth width 25mm outside diameter 36mm SKU: 29801000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-10-teeth-tooth-width-25mm-outside-diameter-36mm-sku-29801000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 120 teeth tooth width 20mm outside diameter 305mm SKU: 29712000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-120-teeth-tooth-width-20mm-outside-diameter-305mm-sku-29712000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 60 teeth tooth width 25mm outer diameter 155mm SKU: 29711060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-60-teeth-tooth-width-25mm-outer-diameter-155mm-sku-29711060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 50 teeth tooth width 25mm outer diameter 130mm SKU: 29711050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-50-teeth-tooth-width-25mm-outer-diameter-130mm-sku-29711050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 45 teeth tooth width 25mm outer diameter 117,5mm SKU: 29711045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-45-teeth-tooth-width-25mm-outer-diameter-1175mm-sku-29711045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 40 teeth tooth width 25mm outer diameter 105mm SKU: 29711040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-40-teeth-tooth-width-25mm-outer-diameter-105mm-sku-29711040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 36 teeth tooth width 25mm outer diameter 95mm SKU: 29711036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-36-teeth-tooth-width-25mm-outer-diameter-95mm-sku-29711036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 30 teeth tooth width 25mm outer diameter 80mm SKU: 29711030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-30-teeth-tooth-width-25mm-outer-diameter-80mm-sku-29711030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 25 teeth tooth width 25mm outer diameter 67,5mm SKU: 29711025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-25-teeth-tooth-width-25mm-outer-diameter-675mm-sku-29711025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 24 teeth tooth width 25mm outer diameter 65mm SKU: 29711024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-24-teeth-tooth-width-25mm-outer-diameter-65mm-sku-29711024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 20 teeth tooth width 25mm outer diameter 55mm SKU: 29711020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-20-teeth-tooth-width-25mm-outer-diameter-55mm-sku-29711020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 18 teeth tooth width 25mm outer diameter 50mm SKU: 29711018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-18-teeth-tooth-width-25mm-outer-diameter-50mm-sku-29711018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 16 teeth tooth width 25mm outer diameter 45mm SKU: 29711016](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-16-teeth-tooth-width-25mm-outer-diameter-45mm-sku-29711016/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 15 teeth tooth width 25mm outer diameter 42,5mm SKU: 29711015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-15-teeth-tooth-width-25mm-outer-diameter-425mm-sku-29711015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Bevel gear made of steel module 3 30 teeth i=2:1 milled SKU: 36145700](https://maedler.in/product/bevel-gear-made-of-steel-module-3-30-teeth-i21-milled-sku-36145700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 15 teeth i=2:1 milled SKU: 36145600](https://maedler.in/product/bevel-gear-made-of-steel-module-3-15-teeth-i21-milled-sku-36145600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 30 teeth i=1.5:1 milled SKU: 36145300](https://maedler.in/product/bevel-gear-made-of-steel-module-3-30-teeth-i1-51-milled-sku-36145300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 20 teeth i=1.5:1 milled SKU: 36145200](https://maedler.in/product/bevel-gear-made-of-steel-module-3-20-teeth-i1-51-milled-sku-36145200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 24 teeth i=1.5:1 milled SKU: 36144900](https://maedler.in/product/bevel-gear-made-of-steel-module-3-24-teeth-i1-51-milled-sku-36144900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=1.5:1 milled SKU: 36144800](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i1-51-milled-sku-36144800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 20 teeth i=1.25:1 milled SKU: 36144500](https://maedler.in/product/bevel-gear-made-of-steel-module-3-20-teeth-i1-251-milled-sku-36144500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=1.25:1 milled SKU: 36144400](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i1-251-milled-sku-36144400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 40 teeth i=1:1 milled SKU: 36142600](https://maedler.in/product/bevel-gear-made-of-steel-module-3-40-teeth-i11-milled-sku-36142600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 30 teeth i=1:1 milled SKU: 36142000](https://maedler.in/product/bevel-gear-made-of-steel-module-3-30-teeth-i11-milled-sku-36142000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 25 teeth i=1:1 milled SKU: 36141600](https://maedler.in/product/bevel-gear-made-of-steel-module-3-25-teeth-i11-milled-sku-36141600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 22 teeth i=1:1 milled SKU: 36141300](https://maedler.in/product/bevel-gear-made-of-steel-module-3-22-teeth-i11-milled-sku-36141300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 20 teeth i=1:1 milled SKU: 36141100](https://maedler.in/product/bevel-gear-made-of-steel-module-3-20-teeth-i11-milled-sku-36141100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 18 teeth i=1:1 milled SKU: 36140900](https://maedler.in/product/bevel-gear-made-of-steel-module-3-18-teeth-i11-milled-sku-36140900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 16 teeth i=1:1 milled SKU: 36140700](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i11-milled-sku-36140700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 60 teeth i=4:1 milled SKU: 36119300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-60-teeth-i41-milled-sku-36119300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 15 teeth i=4:1 milled SKU: 36119200](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-15-teeth-i41-milled-sku-36119200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 56 teeth i=3.5:1 milled SKU: 36118500](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-56-teeth-i3-51-milled-sku-36118500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 16 teeth i=3.5:1 milled SKU: 36118400](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i3-51-milled-sku-36118400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 48 teeth i=3:1 milled SKU: 36118100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-48-teeth-i31-milled-sku-36118100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 16 teeth i=3:1 milled SKU: 36118000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i31-milled-sku-36118000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 45 teeth i=2.5:1 milled SKU: 36116900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-45-teeth-i2-51-milled-sku-36116900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 18 teeth i=2.5:1 milled SKU: 36116800](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-18-teeth-i2-51-milled-sku-36116800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 40 teeth i=2.5:1 milled SKU: 36116500](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-40-teeth-i2-51-milled-sku-36116500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 16 teeth i=2.5:1 milled SKU: 36116400](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i2-51-milled-sku-36116400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 40 teeth i=2:1 milled SKU: 36116100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-40-teeth-i21-milled-sku-36116100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 20 teeth i=2:1 milled SKU: 36116000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-20-teeth-i21-milled-sku-36116000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 30 teeth i=2:1 milled SKU: 36115700](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-30-teeth-i21-milled-sku-36115700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 15 teeth i=2:1 milled SKU: 36115600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-15-teeth-i21-milled-sku-36115600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 30 teeth i=1.5:1 milled SKU: 36115300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-30-teeth-i1-51-milled-sku-36115300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 20 teeth i=1.5:1 milled SKU: 36115200](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-20-teeth-i1-51-milled-sku-36115200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 24 teeth i=1.5:1 milled SKU: 36114900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-24-teeth-i1-51-milled-sku-36114900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 16 teeth i=1.5:1 milled SKU: 36114800](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i1-51-milled-sku-36114800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 40 teeth i=1:1 milled SKU: 36112600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-40-teeth-i11-milled-sku-36112600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 30 teeth i=1:1 milled SKU: 36112000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-30-teeth-i11-milled-sku-36112000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 25 teeth i=1:1 milled SKU: 36111600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-25-teeth-i11-milled-sku-36111600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 22 teeth i=1:1 milled SKU: 36111300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-22-teeth-i11-milled-sku-36111300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 20 teeth i=1:1 milled SKU: 36111100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-20-teeth-i11-milled-sku-36111100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 18 teeth i=1:1 milled SKU: 36110900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-18-teeth-i11-milled-sku-36110900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 16 teeth i=1:1 milled SKU: 36110700](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i11-milled-sku-36110700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 60 teeth i=4:1 milled SKU: 36109300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-60-teeth-i41-milled-sku-36109300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 15 teeth i=4:1 milled SKU: 36109200](https://maedler.in/product/bevel-gear-made-of-steel-module-2-15-teeth-i41-milled-sku-36109200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 56 teeth i=3,5:1 milled SKU: 36108500](https://maedler.in/product/bevel-gear-made-of-steel-module-2-56-teeth-i351-milled-sku-36108500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 16 teeth i=3.5:1 milled SKU: 36108400](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i3-51-milled-sku-36108400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 48 teeth i=3:1 milled SKU: 36108100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-48-teeth-i31-milled-sku-36108100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 16 teeth i=3:1 milled SKU: 36108000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i31-milled-sku-36108000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 45 teeth i=2.5:1 milled SKU: 36106900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-45-teeth-i2-51-milled-sku-36106900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 18 teeth i=2.5:1 milled SKU: 36106800](https://maedler.in/product/bevel-gear-made-of-steel-module-2-18-teeth-i2-51-milled-sku-36106800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 40 teeth i=2.5:1 milled SKU: 36106500](https://maedler.in/product/bevel-gear-made-of-steel-module-2-40-teeth-i2-51-milled-sku-36106500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 16 teeth i=2.5:1 milled SKU: 36106400](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i2-51-milled-sku-36106400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 40 teeth i=2:1 milled SKU: 36106100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-40-teeth-i21-milled-sku-36106100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 20 teeth i=2:1 milled SKU: 36106000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-20-teeth-i21-milled-sku-36106000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 30 teeth i=2:1 milled SKU: 36105700](https://maedler.in/product/bevel-gear-made-of-steel-module-2-30-teeth-i21-milled-sku-36105700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 15 teeth i=2:1 milled SKU: 36105600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-15-teeth-i21-milled-sku-36105600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 30 teeth i=1,5 milled SKU: 36105300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-30-teeth-i15-milled-sku-36105300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 20 teeth i=1.5:1 milled SKU: 36105200](https://maedler.in/product/bevel-gear-made-of-steel-module-2-20-teeth-i1-51-milled-sku-36105200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 24 teeth i=1.5:1 milled SKU: 36104900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-24-teeth-i1-51-milled-sku-36104900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 16 teeth i=1.5:1 milled SKU: 36104800](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i1-51-milled-sku-36104800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 40 teeth i=1:1 milled SKU: 36102600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-40-teeth-i11-milled-sku-36102600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 30 teeth i=1:1 milled SKU: 36102000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-30-teeth-i11-milled-sku-36102000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 25 teeth i=1:1 milled SKU: 36101600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-25-teeth-i11-milled-sku-36101600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 22 teeth i=1:1 milled SKU: 36101300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-22-teeth-i11-milled-sku-36101300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 20 teeth i=1:1 milled SKU: 36101100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-20-teeth-i11-milled-sku-36101100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 16 teeth i=1:1 milled SKU: 36100700](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i11-milled-sku-36100700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 60 teeth i=4:1 milled SKU: 36079300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-60-teeth-i41-milled-sku-36079300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 15 teeth i=4:1 milled SKU: 36079200](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-15-teeth-i41-milled-sku-36079200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 56 teeth i=3.5:1 milled SKU: 36078500](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-56-teeth-i3-51-milled-sku-36078500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 16 teeth i=3.5:1 milled SKU: 36078400](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i3-51-milled-sku-36078400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 48 teeth i=3:1 milled SKU: 36078100](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-48-teeth-i31-milled-sku-36078100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 16 teeth i=3:1 milled SKU: 36078000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i31-milled-sku-36078000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 45 teeth i=2.5:1 milled SKU: 36076900](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-45-teeth-i2-51-milled-sku-36076900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 18 teeth i=2.5:1 milled SKU: 36076800](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-18-teeth-i2-51-milled-sku-36076800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 40 teeth i=2.5:1 milled SKU: 36076500](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-40-teeth-i2-51-milled-sku-36076500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 16 teeth i=2.5:1 milled SKU: 36076400](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i2-51-milled-sku-36076400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 40 teeth i=2:1 milled SKU: 36076100](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-40-teeth-i21-milled-sku-36076100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 20 teeth i=2:1 milled SKU: 36076000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-20-teeth-i21-milled-sku-36076000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 30 teeth i=2:1 milled SKU: 36075700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-30-teeth-i21-milled-sku-36075700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 15 teeth i=2:1 milled SKU: 36075600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-15-teeth-i21-milled-sku-36075600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 30 teeth i=1.5:1 milled SKU: 36075300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-30-teeth-i1-51-milled-sku-36075300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 20 teeth i=1.5:1 milled SKU: 36075200](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-20-teeth-i1-51-milled-sku-36075200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 24 teeth i=1.5:1 milled SKU: 36074900](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-24-teeth-i1-51-milled-sku-36074900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 16 teeth i=1.5:1 milled SKU: 36074800](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i1-51-milled-sku-36074800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 40 teeth i=1:1 milled SKU: 36072600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-40-teeth-i11-milled-sku-36072600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 30 teeth i=1:1 milled SKU: 36072000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-30-teeth-i11-milled-sku-36072000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 25 teeth i=1:1 milled SKU: 36071600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-25-teeth-i11-milled-sku-36071600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 22 teeth i=1:1 milled SKU: 36071300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-22-teeth-i11-milled-sku-36071300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 20 teeth i=1:1 milled SKU: 36071100](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-20-teeth-i11-milled-sku-36071100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 16 teeth i=1:1 milled SKU: 36070700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i11-milled-sku-36070700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 60 teeth i=4:1 milled SKU: 36059300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-60-teeth-i41-milled-sku-36059300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 15 teeth i=4:1 milled SKU: 36059200](https://maedler.in/product/bevel-gear-made-of-steel-module-1-15-teeth-i41-milled-sku-36059200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 56 teeth i=3,5:1 milled SKU: 36058500](https://maedler.in/product/bevel-gear-made-of-steel-module-1-56-teeth-i351-milled-sku-36058500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 16 teeth i=3,5:1 milled SKU: 36058400](https://maedler.in/product/bevel-gear-made-of-steel-module-1-16-teeth-i351-milled-sku-36058400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 45 teeth i=3:1 milled SKU: 36057700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-45-teeth-i31-milled-sku-36057700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 15 teeth i=3:1 milled SKU: 36057600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-15-teeth-i31-milled-sku-36057600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 40 teeth i=2,5:1 milled SKU: 36056500](https://maedler.in/product/bevel-gear-made-of-steel-module-1-40-teeth-i251-milled-sku-36056500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 16 teeth i=2,5:1 milled SKU: 36056400](https://maedler.in/product/bevel-gear-made-of-steel-module-1-16-teeth-i251-milled-sku-36056400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 30 teeth i=2:1 milled SKU: 36055700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-30-teeth-i21-milled-sku-36055700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 15 teeth i=2:1 milled SKU: 36055600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-15-teeth-i21-milled-sku-36055600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 24 teeth i=1,5:1 milled SKU: 36054900](https://maedler.in/product/bevel-gear-made-of-steel-module-1-24-teeth-i151-milled-sku-36054900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 16 teeth i=1.5:1 milled SKU: 36054800](https://maedler.in/product/bevel-gear-made-of-steel-module-1-16-teeth-i1-51-milled-sku-36054800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear set spiral toothed module 1.3 number of teeth 16/32 i=2:1 material steel 42CrMo4 teeth hardened SKU: 38565800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-16-32-i21-material-steel-42crmo4-teeth-hardened-sku-38565800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 16/24 i=1,5:1 material steel 42CrMo4 teeth hardened SKU: 38564800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-16-24-i151-material-steel-42crmo4-teeth-hardened-sku-38564800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 30/30 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38562000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-30-30-i11-material-steel-42crmo4-teeth-hardened-sku-38562000/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 25/25 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38561600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-25-25-i11-material-steel-42crmo4-teeth-hardened-sku-38561600/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 20/20 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38561100](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-20-20-i11-material-steel-42crmo4-teeth-hardened-sku-38561100/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 16/64 i=4:1 material steel 42CrMo4 teeth hardened SKU: 38559400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-16-64-i41-material-steel-42crmo4-teeth-hardened-sku-38559400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 16/48 i=3:1 material steel 42CrMo4 teeth hardened SKU: 38558400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-16-48-i31-material-steel-42crmo4-teeth-hardened-sku-38558400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 20/50 i=2.5:1 material steel 42CrMo4 teeth hardened SKU: 38557200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-20-50-i2-51-material-steel-42crmo4-teeth-hardened-sku-38557200/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 20/40 i=2:1 material steel 42CrMo4 teeth hardened SKU: 38556000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-20-40-i21-material-steel-42crmo4-teeth-hardened-sku-38556000/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 15/31 i=2.066:1 material steel 42CrMo4 teeth hardened SKU: 38555600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-15-31-i2-0661-material-steel-42crmo4-teeth-hardened-sku-38555600/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed, module 1 number of teeth 20/30 i=1.5:1 material steel 42CrMo4 teeth hardened SKU: 38555200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-20-30-i1-51-material-steel-42crmo4-teeth-hardened-sku-38555200/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 13/21 i=1.615:1 material steel 42CrMo4 teeth hardened SKU: 38555000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-13-21-i1-6151-material-steel-42crmo4-teeth-hardened-sku-38555000/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 30/30 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38552000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-30-30-i11-material-steel-42crmo4-teeth-hardened-sku-38552000/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 25/25 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38551600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-25-25-i11-material-steel-42crmo4-teeth-hardened-sku-38551600/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 20/20 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38551100](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-20-20-i11-material-steel-42crmo4-teeth-hardened-sku-38551100/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 16/16 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38550800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-16-16-i11-material-steel-42crmo4-teeth-hardened-sku-38550800/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 20/60 i=3:1 material steel 42CrMo4 teeth hardened SKU: 38537800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-20-60-i31-material-steel-42crmo4-teeth-hardened-sku-38537800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 22/55 i=2.5:1 material steel 42CrMo4 teeth hardened SKU: 38537400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-22-55-i2-51-material-steel-42crmo4-teeth-hardened-sku-38537400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 22/44 i=2:1 material steel 42CrMo4 teeth hardened SKU: 38536200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-22-44-i21-material-steel-42crmo4-teeth-hardened-sku-38536200/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 22/33 i=1.5:1 material steel 42CrMo4 teeth hardened SKU: 38535400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-22-33-i1-51-material-steel-42crmo4-teeth-hardened-sku-38535400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 35/35 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38532200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-35-35-i11-material-steel-42crmo4-teeth-hardened-sku-38532200/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 30/30 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38532000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-30-30-i11-material-steel-42crmo4-teeth-hardened-sku-38532000/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 25/25 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38531600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-25-25-i11-material-steel-42crmo4-teeth-hardened-sku-38531600/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 20/20 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38531000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-20-20-i11-material-steel-42crmo4-teeth-hardened-sku-38531000/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 16/16 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38530800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-16-16-i11-material-steel-42crmo4-teeth-hardened-sku-38530800/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3.5 number of teeth 26/26 i=1:1 material steel 16MnCr5 not hardened SKU: 38151900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-5-number-of-teeth-26-26-i11-material-steel-16mncr5-not-hardened-sku-38151900/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 14/28 i=2:1 material steel 16MnCr5 not hardened SKU: 38145700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-14-28-i21-material-steel-16mncr5-not-hardened-sku-38145700/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 11/22 i=2:1 material steel 16MnCr5 not hardened SKU: 38115500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-11-22-i21-material-steel-16mncr5-not-hardened-sku-38115500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.269 number of teeth 12/24 i=2:1 material steel 16MnCr5 not hardened SKU: 38105500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-269-number-of-teeth-12-24-i21-material-steel-16mncr5-not-hardened-sku-38105500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2 number of teeth 26/26 i=1:1 material steel 16MnCr5 not hardened SKU: 38101900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-number-of-teeth-26-26-i11-material-steel-16mncr5-not-hardened-sku-38101900/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear made of steel module 8 20 teeth i=1:1 SKU: 36771100](https://maedler.in/product/bevel-gear-made-of-steel-module-8-20-teeth-i11-sku-36771100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 45 teeth i=3:1 SKU: 36737700](https://maedler.in/product/bevel-gear-made-of-steel-module-6-45-teeth-i31-sku-36737700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 6 15 teeth i=3:1 SKU: 36737600](https://maedler.in/product/bevel-gear-made-of-steel-module-6-15-teeth-i31-sku-36737600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 6 40 teeth i=2:1 SKU: 36736100](https://maedler.in/product/bevel-gear-made-of-steel-module-6-40-teeth-i21-sku-36736100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 6 20 teeth i=2:1 SKU: 36736000](https://maedler.in/product/bevel-gear-made-of-steel-module-6-20-teeth-i21-sku-36736000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 6 40 teeth i=1:1 SKU: 36732600](https://maedler.in/product/bevel-gear-made-of-steel-module-6-40-teeth-i11-sku-36732600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 30 teeth i=1:1 SKU: 36732000](https://maedler.in/product/bevel-gear-made-of-steel-module-6-30-teeth-i11-sku-36732000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 25 teeth i=1:1 SKU: 36731600](https://maedler.in/product/bevel-gear-made-of-steel-module-6-25-teeth-i11-sku-36731600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 20 teeth i=1:1 SKU: 36731100](https://maedler.in/product/bevel-gear-made-of-steel-module-6-20-teeth-i11-sku-36731100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 18 teeth i=1:1 SKU: 36730900](https://maedler.in/product/bevel-gear-made-of-steel-module-6-18-teeth-i11-sku-36730900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 48 teeth i=3:1 milled SKU: 36218100](https://maedler.in/product/bevel-gear-made-of-steel-module-5-48-teeth-i31-milled-sku-36218100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 16 teeth i=3:1 milled SKU: 36218000](https://maedler.in/product/bevel-gear-made-of-steel-module-5-16-teeth-i31-milled-sku-36218000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 45 teeth i=3:1 milled SKU: 36217700](https://maedler.in/product/bevel-gear-made-of-steel-module-5-45-teeth-i31-milled-sku-36217700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 15 teeth i=3:1 milled SKU: 36217600](https://maedler.in/product/bevel-gear-made-of-steel-module-5-15-teeth-i31-milled-sku-36217600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 45 teeth i=2.5:1 milled SKU: 36216900](https://maedler.in/product/bevel-gear-made-of-steel-module-5-45-teeth-i2-51-milled-sku-36216900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 18 teeth i=2.5:1 milled SKU: 36216800](https://maedler.in/product/bevel-gear-made-of-steel-module-5-18-teeth-i2-51-milled-sku-36216800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 40 teeth i=2:1 milled SKU: 36216100](https://maedler.in/product/bevel-gear-made-of-steel-module-5-40-teeth-i21-milled-sku-36216100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 20 teeth i=2:1 milled SKU: 36216000](https://maedler.in/product/bevel-gear-made-of-steel-module-5-20-teeth-i21-milled-sku-36216000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 30 teeth i=2:1 milled SKU: 36215700](https://maedler.in/product/bevel-gear-made-of-steel-module-5-30-teeth-i21-milled-sku-36215700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 15 teeth i=2:1 milled SKU: 36215600](https://maedler.in/product/bevel-gear-made-of-steel-module-5-15-teeth-i21-milled-sku-36215600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 30 teeth i=1:5 milled SKU: 36215300](https://maedler.in/product/bevel-gear-made-of-steel-module-5-30-teeth-i15-milled-sku-36215300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 20 teeth i=1:5 milled SKU: 36215200](https://maedler.in/product/bevel-gear-made-of-steel-module-5-20-teeth-i15-milled-sku-36215200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 20 teeth i=2.5:1 milled SKU: 36214500](https://maedler.in/product/bevel-gear-made-of-steel-module-5-20-teeth-i2-51-milled-sku-36214500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 16 teeth i=2.5:1 milled SKU: 36214400](https://maedler.in/product/bevel-gear-made-of-steel-module-5-16-teeth-i2-51-milled-sku-36214400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 40 teeth i=1:1 milled SKU: 36212600](https://maedler.in/product/bevel-gear-made-of-steel-module-5-40-teeth-i11-milled-sku-36212600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 30 teeth i=1:1 milled SKU: 36212000](https://maedler.in/product/bevel-gear-made-of-steel-module-5-30-teeth-i11-milled-sku-36212000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 25 teeth i=1:1 milled SKU: 36211600](https://maedler.in/product/bevel-gear-made-of-steel-module-5-25-teeth-i11-milled-sku-36211600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 22 teeth i=1:1 milled SKU: 36211300](https://maedler.in/product/bevel-gear-made-of-steel-module-5-22-teeth-i11-milled-sku-36211300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 20 teeth i=1:1 milled SKU: 36211100](https://maedler.in/product/bevel-gear-made-of-steel-module-5-20-teeth-i11-milled-sku-36211100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 18 teeth i=1:1 milled SKU: 36210900](https://maedler.in/product/bevel-gear-made-of-steel-module-5-18-teeth-i11-milled-sku-36210900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 16 teeth i=1:1 milled SKU: 36210700](https://maedler.in/product/bevel-gear-made-of-steel-module-5-16-teeth-i11-milled-sku-36210700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 60 teeth i=4:1 milled SKU: 36189300](https://maedler.in/product/bevel-gear-made-of-steel-module-4-60-teeth-i41-milled-sku-36189300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 15 teeth i=4:1 milled SKU: 36189200](https://maedler.in/product/bevel-gear-made-of-steel-module-4-15-teeth-i41-milled-sku-36189200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 56 teeth i=3.5:1 milled SKU: 36188500](https://maedler.in/product/bevel-gear-made-of-steel-module-4-56-teeth-i3-51-milled-sku-36188500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=3.5:1 milled SKU: 36188400](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i3-51-milled-sku-36188400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 48 teeth i=3:1 milled SKU: 36188100](https://maedler.in/product/bevel-gear-made-of-steel-module-4-48-teeth-i31-milled-sku-36188100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=3:1 milled SKU: 36188000](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i31-milled-sku-36188000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 45 teeth i=2.5:1 milled SKU: 36186900](https://maedler.in/product/bevel-gear-made-of-steel-module-4-45-teeth-i2-51-milled-sku-36186900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 18 teeth i=2.5:1 milled SKU: 36186800](https://maedler.in/product/bevel-gear-made-of-steel-module-4-18-teeth-i2-51-milled-sku-36186800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 40 teeth i=2.5:1 milled SKU: 36186500](https://maedler.in/product/bevel-gear-made-of-steel-module-4-40-teeth-i2-51-milled-sku-36186500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=2.5:1 milled SKU: 36186400](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i2-51-milled-sku-36186400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 40 teeth i=2:1 milled SKU: 36186100](https://maedler.in/product/bevel-gear-made-of-steel-module-4-40-teeth-i21-milled-sku-36186100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 20 teeth i=2:1 milled SKU: 36186000](https://maedler.in/product/bevel-gear-made-of-steel-module-4-20-teeth-i21-milled-sku-36186000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 30 teeth i=2:1 milled SKU: 36185700](https://maedler.in/product/bevel-gear-made-of-steel-module-4-30-teeth-i21-milled-sku-36185700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 15 teeth i=2:1 milled SKU: 36185600](https://maedler.in/product/bevel-gear-made-of-steel-module-4-15-teeth-i21-milled-sku-36185600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 30 teeth i=1.5:1 milled SKU: 36185300](https://maedler.in/product/bevel-gear-made-of-steel-module-4-30-teeth-i1-51-milled-sku-36185300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 20 teeth i=1.5:1 milled SKU: 36185200](https://maedler.in/product/bevel-gear-made-of-steel-module-4-20-teeth-i1-51-milled-sku-36185200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 24 teeth i=1.5:1 milled SKU: 36184900](https://maedler.in/product/bevel-gear-made-of-steel-module-4-24-teeth-i1-51-milled-sku-36184900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=1.5:1 milled SKU: 36184800](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i1-51-milled-sku-36184800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 20 teeth i=1.25:1 milled SKU: 36184500](https://maedler.in/product/bevel-gear-made-of-steel-module-4-20-teeth-i1-251-milled-sku-36184500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=1.25:1 milled SKU: 36184400](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i1-251-milled-sku-36184400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 40 teeth i=1:1 milled SKU: 36182600](https://maedler.in/product/bevel-gear-made-of-steel-module-4-40-teeth-i11-milled-sku-36182600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 30 teeth i=1:1 milled SKU: 36182000](https://maedler.in/product/bevel-gear-made-of-steel-module-4-30-teeth-i11-milled-sku-36182000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 25 teeth i=1:1 milled SKU: 36181600](https://maedler.in/product/bevel-gear-made-of-steel-module-4-25-teeth-i11-milled-sku-36181600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 22 teeth i=1:1 milled SKU: 36181300](https://maedler.in/product/bevel-gear-made-of-steel-module-4-22-teeth-i11-milled-sku-36181300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 20 teeth i=1:1 milled SKU: 36181100](https://maedler.in/product/bevel-gear-made-of-steel-module-4-20-teeth-i11-milled-sku-36181100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 18 teeth i=1:1 milled SKU: 36180900](https://maedler.in/product/bevel-gear-made-of-steel-module-4-18-teeth-i11-milled-sku-36180900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 16 teeth i=1:1 milled SKU: 36180700](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i11-milled-sku-36180700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 60 teeth i=4:1 milled SKU: 36149300](https://maedler.in/product/bevel-gear-made-of-steel-module-3-60-teeth-i41-milled-sku-36149300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 15 teeth i=4:1 milled SKU: 36149200](https://maedler.in/product/bevel-gear-made-of-steel-module-3-15-teeth-i41-milled-sku-36149200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 56 teeth i=3.5:1 milled SKU: 36148500](https://maedler.in/product/bevel-gear-made-of-steel-module-3-56-teeth-i3-51-milled-sku-36148500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=3.5:1 milled SKU: 36148400](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i3-51-milled-sku-36148400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 48 teeth i=3:1 milled SKU: 36148100](https://maedler.in/product/bevel-gear-made-of-steel-module-3-48-teeth-i31-milled-sku-36148100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=3:1 milled SKU: 36148000](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i31-milled-sku-36148000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 45 teeth i=2.5:1 milled SKU: 36146900](https://maedler.in/product/bevel-gear-made-of-steel-module-3-45-teeth-i2-51-milled-sku-36146900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 18 teeth i=2.5:1 milled SKU: 36146800](https://maedler.in/product/bevel-gear-made-of-steel-module-3-18-teeth-i2-51-milled-sku-36146800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 40 teeth i=2.5:1 milled SKU: 36146500](https://maedler.in/product/bevel-gear-made-of-steel-module-3-40-teeth-i2-51-milled-sku-36146500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=2.5:1 milled SKU: 36146400](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i2-51-milled-sku-36146400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 40 teeth i=2:1 milled SKU: 36146100](https://maedler.in/product/bevel-gear-made-of-steel-module-3-40-teeth-i21-milled-sku-36146100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 20 teeth i=2:1 milled SKU: 36146000](https://maedler.in/product/bevel-gear-made-of-steel-module-3-20-teeth-i21-milled-sku-36146000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Planetary gearbox MPL size 70 ratio i=10 1-stage SKU: 40527010](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i10-1-stage-sku-40527010/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=7 1-stage SKU: 40527007](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i7-1-stage-sku-40527007/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=5 1-stage SKU: 40527005](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i5-1-stage-sku-40527005/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=3 1-stage SKU: 40527003](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i3-1-stage-sku-40527003/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=100 2-stage SKU: 40525100](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i100-2-stage-sku-40525100/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=70 2-stage SKU: 40525070](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i70-2-stage-sku-40525070/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=55 2-stage SKU: 40525050](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i55-2-stage-sku-40525050/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=35 2-stage SKU: 40525035](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i35-2-stage-sku-40525035/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=25 2-stage SKU: 40525025](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i25-2-stage-sku-40525025/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=10 1-stage SKU: 40525010](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i10-1-stage-sku-40525010/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=7 1-stage SKU: 40525007](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i7-1-stage-sku-40525007/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=5 1-stage SKU: 40525005](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i5-1-stage-sku-40525005/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=512 3-stage SKU: 40518512](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i512-3-stage-sku-40518512/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=256 3-stage SKU: 40518256](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i256-3-stage-sku-40518256/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=200 3-stage SKU: 40518200](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i200-3-stage-sku-40518200/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=160 3-stage SKU: 40518160](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i160-3-stage-sku-40518160/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=125 3-stage SKU: 40518125](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i125-3-stage-sku-40518125/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=100 3-stage SKU: 40518100](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i100-3-stage-sku-40518100/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=80 3-stage SKU: 40518080](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i80-3-stage-sku-40518080/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=64 2-stage SKU: 40518064](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i64-2-stage-sku-40518064/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=56 2-stage SKU: 40518056](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i56-2-stage-sku-40518056/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=49 2-stage SKU: 40518049](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i49-2-stage-sku-40518049/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=40 2-stage SKU: 40518040](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i40-2-stage-sku-40518040/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=32 2-stage SKU: 40518032](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i32-2-stage-sku-40518032/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=25 2-stage SKU: 40518025](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i25-2-stage-sku-40518025/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=20 2-stage SKU: 40518020](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i20-2-stage-sku-40518020/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=16 2-stage SKU: 40518016](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i16-2-stage-sku-40518016/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=15 2-stage SKU: 40518015](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i15-2-stage-sku-40518015/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=12 2-stage SKU: 40518012](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i12-2-stage-sku-40518012/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=8 1-stage SKU: 40518008](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i8-1-stage-sku-40518008/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=7 1-stage SKU: 40518007](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i7-1-stage-sku-40518007/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=5 1-stage SKU: 40518005](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i5-1-stage-sku-40518005/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=4 1-stage SKU: 40518004](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i4-1-stage-sku-40518004/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=3 1-stage SKU: 40518003](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i3-1-stage-sku-40518003/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=512 3-stage SKU: 40516512](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i512-3-stage-sku-40516512/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=256 3-stage SKU: 40516256](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i256-3-stage-sku-40516256/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=200 3-stage SKU: 40516200](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i200-3-stage-sku-40516200/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=160 3-stage SKU: 40516160](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i160-3-stage-sku-40516160/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=125 3-stage SKU: 40516125](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i125-3-stage-sku-40516125/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=100 3-stage SKU: 40516100](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i100-3-stage-sku-40516100/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=80 3-stage SKU: 40516080](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i80-3-stage-sku-40516080/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=64 2-stage SKU: 40516064](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i64-2-stage-sku-40516064/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=56 2-stage SKU: 40516056](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i56-2-stage-sku-40516056/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=49 2-stage SKU: 40516049](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i49-2-stage-sku-40516049/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=40 2-stage SKU: 40516040](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i40-2-stage-sku-40516040/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=32 2-stage SKU: 40516032](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i32-2-stage-sku-40516032/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=25 2-stage SKU: 40516025](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i25-2-stage-sku-40516025/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=20 2-stage SKU: 40516020](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i20-2-stage-sku-40516020/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=16 2-stage SKU: 40516016](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i16-2-stage-sku-40516016/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=15 2-stage SKU: 40516015](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i15-2-stage-sku-40516015/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=12 2-stage SKU: 40516012](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i12-2-stage-sku-40516012/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=8 1-stage SKU: 40516008](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i8-1-stage-sku-40516008/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=7 1-stage SKU: 40516007](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i7-1-stage-sku-40516007/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=5 1-stage SKU: 40516005](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i5-1-stage-sku-40516005/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=4 1-stage SKU: 40516004](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i4-1-stage-sku-40516004/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=3 1-stage SKU: 40516003](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i3-1-stage-sku-40516003/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=64 2-stage SKU: 40514064](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i64-2-stage-sku-40514064/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=56 2-stage SKU: 40514056](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i56-2-stage-sku-40514056/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=49 2-stage SKU: 40514049](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i49-2-stage-sku-40514049/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=40 2-stage SKU: 40514040](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i40-2-stage-sku-40514040/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=35 2-stage SKU: 40514035](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i35-2-stage-sku-40514035/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=32 2-stage SKU: 40514032](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i32-2-stage-sku-40514032/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=28 2-stage SKU: 40514028](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i28-2-stage-sku-40514028/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=25 2-stage SKU: 40514025](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i25-2-stage-sku-40514025/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=20 2-stage SKU: 40514020](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i20-2-stage-sku-40514020/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=16 2-stage SKU: 40514016](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i16-2-stage-sku-40514016/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=8 1-stage SKU: 40514008](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i8-1-stage-sku-40514008/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=7 1-stage SKU: 40514007](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i7-1-stage-sku-40514007/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=5 1-stage SKU: 40514005](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i5-1-stage-sku-40514005/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=4 1-stage SKU: 40514004](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i4-1-stage-sku-40514004/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Bevel gear set spiral toothed module 3.5, number of teeth 9/27 i=3 :1 material steel 16MnCr5 teeth hardened SKU: 38657500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-5-number-of-teeth-9-27-i3-1-material-steel-16mncr5-teeth-hardened-sku-38657500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3.6 number of teeth 9/23 i=2.555..:1 material steel 16MnCr5 teeth hardened SKU: 38656300](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-6-number-of-teeth-9-23-i2-555-1-material-steel-16mncr5-teeth-hardened-sku-38656300/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3.5 number of teeth 13/26 i=2:1 material steel 16MnCr5 teeth hardened SKU: 38655500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-5-number-of-teeth-13-26-i21-material-steel-16mncr5-teeth-hardened-sku-38655500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3.5 number of teeth 24/24 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38651700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-5-number-of-teeth-24-24-i11-material-steel-16mncr5-teeth-hardened-sku-38651700/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 13/26 i=2:1 material steel 16MnCr5 teeth hardened SKU: 38645500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-13-26-i21-material-steel-16mncr5-teeth-hardened-sku-38645500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 16/24 i=1.5:1 material steel 16MnCr5 teeth hardened SKU: 38644900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-16-24-i1-51-material-steel-16mncr5-teeth-hardened-sku-38644900/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 24/24 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38641700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-24-24-i11-material-steel-16mncr5-teeth-hardened-sku-38641700/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 21/21 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38641200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-21-21-i11-material-steel-16mncr5-teeth-hardened-sku-38641200/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5736 number of teeth 9/27 i=3:1 material steel 16MnCr5 teeth hardened SKU: 38617500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5736-number-of-teeth-9-27-i31-material-steel-16mncr5-teeth-hardened-sku-38617500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 13/26 i=2:1 material steel 16MnCr5 teeth hardened SKU: 38615500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-13-26-i21-material-steel-16mncr5-teeth-hardened-sku-38615500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 16/24 i=1.5:1 material steel 16MnCr5 teeth hardened SKU: 38614900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-16-24-i1-51-material-steel-16mncr5-teeth-hardened-sku-38614900/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 24/24 i=1:1 material steel 16MnCr5 teeth hardened bore 20mm SKU: 38611700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-24-24-i11-material-steel-16mncr5-teeth-hardened-bore-20mm-sku-38611700/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 19/19 i=1:1 material steel 16MnCr5 teeth hardened bore 20mm SKU: 38611200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-19-19-i11-material-steel-16mncr5-teeth-hardened-bore-20mm-sku-38611200/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.229 number of teeth 9/27 i=3:1 material steel 16MnCr5 teeth hardened SKU: 38607500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-229-number-of-teeth-9-27-i31-material-steel-16mncr5-teeth-hardened-sku-38607500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.321 number of teeth 13/26 i=2:1 material steel 16MnCr5 teeth hardened SKU: 38605500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-321-number-of-teeth-13-26-i21-material-steel-16mncr5-teeth-hardened-sku-38605500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2 number of teeth 16/24 i=1.5:1 material steel 16MnCr5 teeth hardened SKU: 38604900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-number-of-teeth-16-24-i1-51-material-steel-16mncr5-teeth-hardened-sku-38604900/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.236 number of teeth 24/24 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38601700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-236-number-of-teeth-24-24-i11-material-steel-16mncr5-teeth-hardened-sku-38601700/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.2881 number of teeth 21/21 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38601200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-2881-number-of-teeth-21-21-i11-material-steel-16mncr5-teeth-hardened-sku-38601200/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 11/44 i=4:1 material steel 42CrMo4 teeth hardened SKU: 38578400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-11-44-i41-material-steel-42crmo4-teeth-hardened-sku-38578400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 10/30 i=3:1 material steel 42CrMo4 teeth hardened SKU: 38577400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-10-30-i31-material-steel-42crmo4-teeth-hardened-sku-38577400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 16/40 i=2,5:1 material steel 42CrMo4 teeth hardened SKU: 38576400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-16-40-i251-material-steel-42crmo4-teeth-hardened-sku-38576400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 16/32 i=2:1 material steel 42CrMo4 teeth hardened SKU: 38575600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-16-32-i21-material-steel-42crmo4-teeth-hardened-sku-38575600/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 16/24 i=1.5:1 material steel 42CrMo4 teeth hardened SKU: 38574800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-16-24-i1-51-material-steel-42crmo4-teeth-hardened-sku-38574800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 13/18 i=1.385:1 material steel 42CrMo4 teeth hardened SKU: 38574400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-13-18-i1-3851-material-steel-42crmo4-teeth-hardened-sku-38574400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 14/17 i=1.214:1 material steel 42CrMo4 teeth hardened SKU: 38574000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-14-17-i1-2141-material-steel-42crmo4-teeth-hardened-sku-38574000/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 28/28 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38571900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-28-28-i11-material-steel-42crmo4-teeth-hardened-sku-38571900/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 24/24 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38571500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-24-24-i11-material-steel-42crmo4-teeth-hardened-sku-38571500/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 18/18 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38570900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-18-18-i11-material-steel-42crmo4-teeth-hardened-sku-38570900/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 11/33 i=3:1 material steel 42CrMo4 teeth hardened SKU: 38567800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-11-33-i31-material-steel-42crmo4-teeth-hardened-sku-38567800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 14/35 i=2.5:1 material steel 42CrMo4 teeth hardened SKU: 38566600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-14-35-i2-51-material-steel-42crmo4-teeth-hardened-sku-38566600/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gearbox KU/I, type K, size 0 type 10 gear ratio 2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200102](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-10-gear-ratio-21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I, type K, size 0, type 10 gear ratio 1,5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200101](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-10-gear-ratio-151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I, type K, size 0, type 10 gear ratio 1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200100](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-10-gear-ratio-11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox DZR size 4 version B i=2:1 housing and shafts stainless steel SKU: 41092602](https://maedler.in/product/bevel-gearbox-dzr-size-4-version-b-i21-housing-and-shafts-stainless-steel-sku-41092602/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 4 version B i=1:1 housing and shafts stainless steel SKU: 41092600](https://maedler.in/product/bevel-gearbox-dzr-size-4-version-b-i11-housing-and-shafts-stainless-steel-sku-41092600/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 3 version B i=2:1 housing and shafts stainless steel SKU: 41092402](https://maedler.in/product/bevel-gearbox-dzr-size-3-version-b-i21-housing-and-shafts-stainless-steel-sku-41092402/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 3 version B i=1:1 housing and shafts stainless steel SKU: 41092400](https://maedler.in/product/bevel-gearbox-dzr-size-3-version-b-i11-housing-and-shafts-stainless-steel-sku-41092400/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 2 version B i=2:1 housing and shafts stainless steel SKU: 41092202](https://maedler.in/product/bevel-gearbox-dzr-size-2-version-b-i21-housing-and-shafts-stainless-steel-sku-41092202/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 2 version B i=1:1 housing and shafts stainless steel SKU: 41092200](https://maedler.in/product/bevel-gearbox-dzr-size-2-version-b-i11-housing-and-shafts-stainless-steel-sku-41092200/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 1 version B i=2:1 housing and shafts stainless steel SKU: 41092002](https://maedler.in/product/bevel-gearbox-dzr-size-1-version-b-i21-housing-and-shafts-stainless-steel-sku-41092002/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 1 version B i=1:1 housing and shafts stainless steel SKU: 41092000](https://maedler.in/product/bevel-gearbox-dzr-size-1-version-b-i11-housing-and-shafts-stainless-steel-sku-41092000/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 4 version A i=2:1 housing and shafts stainless steel SKU: 41091602](https://maedler.in/product/bevel-gearbox-dzr-size-4-version-a-i21-housing-and-shafts-stainless-steel-sku-41091602/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 4 version A i=1:1 housing and shafts stainless steel SKU: 41091600](https://maedler.in/product/bevel-gearbox-dzr-size-4-version-a-i11-housing-and-shafts-stainless-steel-sku-41091600/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 3 version A i=2:1 housing and shafts stainless steel SKU: 41091402](https://maedler.in/product/bevel-gearbox-dzr-size-3-version-a-i21-housing-and-shafts-stainless-steel-sku-41091402/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 3 version A i=1:1 housing and shafts stainless steel SKU: 41091400](https://maedler.in/product/bevel-gearbox-dzr-size-3-version-a-i11-housing-and-shafts-stainless-steel-sku-41091400/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 2 version A i=2:1 housing and shafts stainless steel SKU: 41091202](https://maedler.in/product/bevel-gearbox-dzr-size-2-version-a-i21-housing-and-shafts-stainless-steel-sku-41091202/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 2 version A i=1:1 housing and shafts stainless steel SKU: 41091200](https://maedler.in/product/bevel-gearbox-dzr-size-2-version-a-i11-housing-and-shafts-stainless-steel-sku-41091200/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 1 version A i=2:1 housing and shafts stainless steel SKU: 41091002](https://maedler.in/product/bevel-gearbox-dzr-size-1-version-a-i21-housing-and-shafts-stainless-steel-sku-41091002/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 1 version A i=1:1 housing and shafts stainless steel SKU: 41091000](https://maedler.in/product/bevel-gearbox-dzr-size-1-version-a-i11-housing-and-shafts-stainless-steel-sku-41091000/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZA, type H, size 3, i=3:1 SKU: 41013403](https://maedler.in/product/bevel-gearbox-dza-type-h-size-3-i31-sku-41013403/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 3, i=2:1 SKU: 41013402](https://maedler.in/product/bevel-gearbox-dza-type-h-size-3-i21-sku-41013402/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 3, i=1:1 SKU: 41013400](https://maedler.in/product/bevel-gearbox-dza-type-h-size-3-i11-sku-41013400/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 2, i=3:1 SKU: 41013203](https://maedler.in/product/bevel-gearbox-dza-type-h-size-2-i31-sku-41013203/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 2, i=2:1 SKU: 41013202](https://maedler.in/product/bevel-gearbox-dza-type-h-size-2-i21-sku-41013202/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 2, i=1:1 SKU: 41013200](https://maedler.in/product/bevel-gearbox-dza-type-h-size-2-i11-sku-41013200/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, size 4, type B, i=2:1 SKU: 41002602](https://maedler.in/product/bevel-gearbox-dza-size-4-type-b-i21-sku-41002602/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 4, type B, i=1:1 SKU: 41002600](https://maedler.in/product/bevel-gearbox-dza-size-4-type-b-i11-sku-41002600/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 3, type B, i=2:1 SKU: 41002402](https://maedler.in/product/bevel-gearbox-dza-size-3-type-b-i21-sku-41002402/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 3, type B, i=1:1 SKU: 41002400](https://maedler.in/product/bevel-gearbox-dza-size-3-type-b-i11-sku-41002400/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 2, type B, i=2:1 SKU: 41002202](https://maedler.in/product/bevel-gearbox-dza-size-2-type-b-i21-sku-41002202/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 2, type B, i=1:1 SKU: 41002200](https://maedler.in/product/bevel-gearbox-dza-size-2-type-b-i11-sku-41002200/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 1, type B, i=2:1 SKU: 41002002](https://maedler.in/product/bevel-gearbox-dza-size-1-type-b-i21-sku-41002002/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 1, type B, i=1:1 SKU: 41002000](https://maedler.in/product/bevel-gearbox-dza-size-1-type-b-i11-sku-41002000/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 4, type A, i=2:1 SKU: 41001602](https://maedler.in/product/bevel-gearbox-dza-size-4-type-a-i21-sku-41001602/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 4, type A, i=1:1 SKU: 41001600](https://maedler.in/product/bevel-gearbox-dza-size-4-type-a-i11-sku-41001600/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 3, type A, i=2:1 SKU: 41001402](https://maedler.in/product/bevel-gearbox-dza-size-3-type-a-i21-sku-41001402/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 3, type A, i=1:1 SKU: 41001400](https://maedler.in/product/bevel-gearbox-dza-size-3-type-a-i11-sku-41001400/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 2, type A, i=2:1 SKU: 41001202](https://maedler.in/product/bevel-gearbox-dza-size-2-type-a-i21-sku-41001202/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 2, type A, i=1:1 SKU: 41001200](https://maedler.in/product/bevel-gearbox-dza-size-2-type-a-i11-sku-41001200/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 1, type A, i=2:1 SKU: 41001002](https://maedler.in/product/bevel-gearbox-dza-size-1-type-a-i21-sku-41001002/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 1, type A, i=1:1 SKU: 41001000](https://maedler.in/product/bevel-gearbox-dza-size-1-type-a-i11-sku-41001000/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Reducing bush MPL size 90 bore 24mm outer diameter 28mm length 20mm slotted SKU: 40569024](https://maedler.in/product/reducing-bush-mpl-size-90-bore-24mm-outer-diameter-28mm-length-20mm-slotted-sku-40569024/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 90 bore 19mm outer diameter 28mm length 20mm slotted SKU: 40569019](https://maedler.in/product/reducing-bush-mpl-size-90-bore-19mm-outer-diameter-28mm-length-20mm-slotted-sku-40569019/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 90 bore 16mm outer diameter 28mm length 20mm slotted SKU: 40569016](https://maedler.in/product/reducing-bush-mpl-size-90-bore-16mm-outer-diameter-28mm-length-20mm-slotted-sku-40569016/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 90 bore 14mm outer diameter 28mm length 20mm slotted SKU: 40569014](https://maedler.in/product/reducing-bush-mpl-size-90-bore-14mm-outer-diameter-28mm-length-20mm-slotted-sku-40569014/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 90 bore 11mm outer diameter 28mm length 20mm slotted SKU: 40569011](https://maedler.in/product/reducing-bush-mpl-size-90-bore-11mm-outer-diameter-28mm-length-20mm-slotted-sku-40569011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 16mm outer diameter 19mm length 13.5mm slotted SKU: 40567016](https://maedler.in/product/reducing-bush-mpl-size-70-bore-16mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567016/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 14mm outer diameter 19mm length 13.5mm slotted SKU: 40567014](https://maedler.in/product/reducing-bush-mpl-size-70-bore-14mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567014/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 11mm outer diameter 19mm length 13.5mm slotted SKU: 40567011](https://maedler.in/product/reducing-bush-mpl-size-70-bore-11mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 10mm outer diameter 19mm length 13.5mm slotted SKU: 40567010](https://maedler.in/product/reducing-bush-mpl-size-70-bore-10mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567010/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 9mm outer diameter 19mm length 13.5mm slotted SKU: 40567009](https://maedler.in/product/reducing-bush-mpl-size-70-bore-9mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567009/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 14mm outer diameter 18mm length 9mm slotted SKU: 40565014](https://maedler.in/product/reducing-bush-mpl-size-50-bore-14mm-outer-diameter-18mm-length-9mm-slotted-sku-40565014/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 12mm outer diameter 18mm length 9mm slotted SKU: 40565012](https://maedler.in/product/reducing-bush-mpl-size-50-bore-12mm-outer-diameter-18mm-length-9mm-slotted-sku-40565012/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 11mm outer diameter 18mm length 9mm slotted SKU: 40565011](https://maedler.in/product/reducing-bush-mpl-size-50-bore-11mm-outer-diameter-18mm-length-9mm-slotted-sku-40565011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 9mm outer diameter 18mm length 9mm slotted SKU: 40565009](https://maedler.in/product/reducing-bush-mpl-size-50-bore-9mm-outer-diameter-18mm-length-9mm-slotted-sku-40565009/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 8mm outer diameter 18mm length 9mm slotted SKU: 40565008](https://maedler.in/product/reducing-bush-mpl-size-50-bore-8mm-outer-diameter-18mm-length-9mm-slotted-sku-40565008/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 80 bore 14mm outer diameter 19mm length 25mm slotted SKU: 40558014](https://maedler.in/product/reducing-bush-mps-size-80-bore-14mm-outer-diameter-19mm-length-25mm-slotted-sku-40558014/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 80 bore 11mm outer diameter 19mm length 25mm slotted SKU: 40558011](https://maedler.in/product/reducing-bush-mps-size-80-bore-11mm-outer-diameter-19mm-length-25mm-slotted-sku-40558011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 60 bore 11mm outer diameter 14mm length 20mm slotted SKU: 40556011](https://maedler.in/product/reducing-bush-mps-size-60-bore-11mm-outer-diameter-14mm-length-20mm-slotted-sku-40556011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 60 bore 9mm outer diameter 14mm length 20mm slotted SKU: 40556009](https://maedler.in/product/reducing-bush-mps-size-60-bore-9mm-outer-diameter-14mm-length-20mm-slotted-sku-40556009/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 40 bore 6mm outer diameter 9mm length 17mm slotted SKU: 40554006](https://maedler.in/product/reducing-bush-mps-size-40-bore-6mm-outer-diameter-9mm-length-17mm-slotted-sku-40554006/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Motor adaption MPL size 90 outer dim. 100 x 100 x 27mm mounting hole circle-Ø 115mm M8 centering-Ø 95mm SKU: 40549095](https://maedler.in/product/motor-adaption-mpl-size-90-outer-dim-100-x-100-x-27mm-mounting-hole-circle-o-115mm-m8-centering-o-95mm-sku-40549095/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 90 outer dim. 90 x 90 x 27mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40549080](https://maedler.in/product/motor-adaption-mpl-size-90-outer-dim-90-x-90-x-27mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40549080/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 90 outer dim. 90 x 90 x 27mm mounting hole circle-Ø 90mm M6 centering-Ø 70mm SKU: 40549070](https://maedler.in/product/motor-adaption-mpl-size-90-outer-dim-90-x-90-x-27mm-mounting-hole-circle-o-90mm-m6-centering-o-70mm-sku-40549070/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 90 outer-Ø 93 x 21mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40549060](https://maedler.in/product/motor-adaption-mpl-size-90-outer-o-93-x-21mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40549060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 70 outer dim. 90 x 90 x 21.5 mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40547080](https://maedler.in/product/motor-adaption-mpl-size-70-outer-dim-90-x-90-x-21-5-mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40547080/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 70 outer dim. 80 x 80 x 31.5mm mounting hole circle-Ø 90mm M6 centering-Ø 70mm SKU: 40547070](https://maedler.in/product/motor-adaption-mpl-size-70-outer-dim-80-x-80-x-31-5mm-mounting-hole-circle-o-90mm-m6-centering-o-70mm-sku-40547070/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 70 outer dim. 70 x 70 x 21.5mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40547060](https://maedler.in/product/motor-adaption-mpl-size-70-outer-dim-70-x-70-x-21-5mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40547060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 70 outer-Ø 73 x 17,5mm mounting hole circle-Ø 63mm M5 centering-Ø 40mm SKU: 40547040](https://maedler.in/product/motor-adaption-mpl-size-70-outer-o-73-x-175mm-mounting-hole-circle-o-63mm-m5-centering-o-40mm-sku-40547040/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 50 outer dim. 70 x 70 x 27mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40545060](https://maedler.in/product/motor-adaption-mpl-size-50-outer-dim-70-x-70-x-27mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40545060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 50 outer dim. 55 x 55 x 17mm mounting hole circle-Ø 63mm M5 centering-Ø 40mm SKU: 40545040](https://maedler.in/product/motor-adaption-mpl-size-50-outer-dim-55-x-55-x-17mm-mounting-hole-circle-o-63mm-m5-centering-o-40mm-sku-40545040/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPS size 80 outer dim. 90 x 90 x 33mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40538180](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-90-x-90-x-33mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40538180/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 80 outer dim. 100 x 100 x 33mm mounting hole circle-Ø 115mm M8 centering-Ø 95mm SKU: 40538095](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-100-x-100-x-33mm-mounting-hole-circle-o-115mm-m8-centering-o-95mm-sku-40538095/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 80 outer dim. 90 x 90 x 23mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40538080](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-90-x-90-x-23mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40538080/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 80 outer dim. 80 x 80 x 33mm mounting hole circle-Ø 90mm M6 centering-Ø 70mm SKU: 40538070](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-80-x-80-x-33mm-mounting-hole-circle-o-90mm-m6-centering-o-70mm-sku-40538070/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 80 outer dim. 80 x 80 x 23mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40538060](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-80-x-80-x-23mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40538060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 60 outer dim. 90 x 90 x 27mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40536080](https://maedler.in/product/motor-adaption-mps-size-60-outer-dim-90-x-90-x-27mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40536080/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 60 outer dim. 80 x 80 x 37mm mounting hole circle-Ø 90mm M6 centering-Ø 70mm SKU: 40536070](https://maedler.in/product/motor-adaption-mps-size-60-outer-dim-80-x-80-x-37mm-mounting-hole-circle-o-90mm-m6-centering-o-70mm-sku-40536070/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 60 outer dim. 70 x 70 x 27mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40536060](https://maedler.in/product/motor-adaption-mps-size-60-outer-dim-70-x-70-x-27mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40536060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 60 outer dim. 60 x 60 x 20mm mounting hole circle-Ø 63mm M5 centering-Ø 40mm SKU: 40536040](https://maedler.in/product/motor-adaption-mps-size-60-outer-dim-60-x-60-x-20mm-mounting-hole-circle-o-63mm-m5-centering-o-40mm-sku-40536040/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 40 outer dim. 70 x 70 x 25mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40534060](https://maedler.in/product/motor-adaption-mps-size-40-outer-dim-70-x-70-x-25mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40534060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 40 outer dim. 55 x 55 x 18mm mounting hole circle-Ø 63mm M5 centering-Ø 40mm SKU: 40534040](https://maedler.in/product/motor-adaption-mps-size-40-outer-dim-55-x-55-x-18mm-mounting-hole-circle-o-63mm-m5-centering-o-40mm-sku-40534040/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Planetary gearbox MPL size 90 ratio i=100 2-stage SKU: 40529100](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i100-2-stage-sku-40529100/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=70 2-stage SKU: 40529070](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i70-2-stage-sku-40529070/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=50 2-stage SKU: 40529050](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i50-2-stage-sku-40529050/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=35 2-stage SKU: 40529035](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i35-2-stage-sku-40529035/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=30 2-stage SKU: 40529030](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i30-2-stage-sku-40529030/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=25 2-stage SKU: 40529025](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i25-2-stage-sku-40529025/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=15 2-stage SKU: 40529015](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i15-2-stage-sku-40529015/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=10 1-stage SKU: 40529010](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i10-1-stage-sku-40529010/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=7 1-stage SKU: 40529007](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i7-1-stage-sku-40529007/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=5 1-stage SKU: 40529005](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i5-1-stage-sku-40529005/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=3 1-stage SKU: 40529003](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i3-1-stage-sku-40529003/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=100 2-stage SKU: 40527100](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i100-2-stage-sku-40527100/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=70 2-stage SKU: 40527070](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i70-2-stage-sku-40527070/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=50 2-stage SKU: 40527050](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i50-2-stage-sku-40527050/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=35 2-stage SKU: 40527035](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i35-2-stage-sku-40527035/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=30 2-stage SKU: 40527030](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i30-2-stage-sku-40527030/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=25 2-stage SKU: 40527025](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i25-2-stage-sku-40527025/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=15 2-stage SKU: 40527015](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i15-2-stage-sku-40527015/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Bevel gearbox KU/I model L size 2 version 60 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203805](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203805/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203804](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203804/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203803](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203803/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203802](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203802/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203801](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203801/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203800](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203800/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203706](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203706/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203705](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203705/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203704](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203704/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203703](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203703/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203702](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203702/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203701](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203701/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203700](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203700/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Miniature Bevel gearbox MKU, type H, size 035, type 80, gear ratio 1:1 SKU: 41203581](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-035-type-80-gear-ratio-11-sku-41203581/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 035, type 70, gear ratio 1:1 SKU: 41203571](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-035-type-70-gear-ratio-11-sku-41203571/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 035, type 60, gear ratio 1:1 SKU: 41203561](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-035-type-60-gear-ratio-11-sku-41203561/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 035, type 30, gear ratio 1:1 SKU: 41203531](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-035-type-30-gear-ratio-11-sku-41203531/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 035, type 20, gear ratio 1:1 SKU: 41203521](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-035-type-20-gear-ratio-11-sku-41203521/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 035, type 10, gear ratio 1:1 SKU: 41203511](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-035-type-10-gear-ratio-11-sku-41203511/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Bevel gearbox KU/I model L size 1 version 60 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203506](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203506/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203505](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203505/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203504](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203504/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203503](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203503/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203502](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203502/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203501](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203501/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203500](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203500/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203406](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203406/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203405](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203404](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203403](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203402](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203401](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203400](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203203](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203203/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203202](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203202/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203201](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203201/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203200](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203200/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203103](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203102](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203101](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203100](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model K size 30 version 20 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201405](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201404](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201403](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201402](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201401](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201400](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 30 version 10 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201305](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201305/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201304](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201304/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201303](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201303/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201302](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201302/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201301](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201301/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201300](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201300/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 25 version 20 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201106](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201106/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201105](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201105/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201104](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201104/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201103](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201102](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201101](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201100](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 25 version 10 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201006](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201006/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201005](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201005/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201004](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201004/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201003](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201003/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201002](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201002/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201001](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201001/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201000](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201000/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 2 version 20 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200806](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200806/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200805](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200805/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200804](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200804/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200803](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200803/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200802](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200802/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200801](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200801/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200800](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200800/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 2 version 10 i= 6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200706](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i-61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200706/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i= 5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200705](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200705/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i= 4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200704](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i-41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200704/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200703](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200703/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200702](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200702/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200701](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200701/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200700](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200700/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 1 version 20 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200506](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200506/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200505](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200505/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200504](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200504/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200503](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200503/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200502](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200502/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200501](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200501/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200500](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200500/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 1 version 10 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200406](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200406/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200405](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200404](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200403](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200402](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200401](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200400](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 0 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200203](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-0-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200203/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 0 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200202](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-0-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200202/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I, type K, size 0, type 20 gear ratio 1,5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200201](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-20-gear-ratio-151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200201/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I, type K, size 0, type 20 gear ratio 1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200200](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-20-gear-ratio-11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200200/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I, type K, size 0, type 10 gear ratio 3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200103](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-10-gear-ratio-31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model H size 25 version 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207105](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207105/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207104](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207104/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207103](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207102](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207101](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207100](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207006](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207006/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207005](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207005/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207004](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207004/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207003](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207003/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207002](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207002/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207001](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207001/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207000](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207000/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206806](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206806/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206805](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206805/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206804](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206804/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206803](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206803/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206802](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206802/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206801](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206801/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206800](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206800/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206706](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206706/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206705](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206705/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206704](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206704/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206703](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206703/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206702](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206702/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206701](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206701/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206700](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206700/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206506](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206506/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206505](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206505/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206504](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206504/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206503](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206503/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206502](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206502/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206501](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206501/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206500](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206500/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206406](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206406/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206405](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206404](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206403](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206402](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206401](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206400](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206203](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206203/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206202](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206202/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206201](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206201/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206200](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206200/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206103](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206102](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206101](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206100](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Miniature Bevel gearbox MKU, type H, size 045, type 80, gear ratio 4:1 SKU: 41204584](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-80-gear-ratio-41-sku-41204584/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 80, gear ratio 3:1 SKU: 41204583](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-80-gear-ratio-31-sku-41204583/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 80, gear ratio 2:1 SKU: 41204582](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-80-gear-ratio-21-sku-41204582/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 80, gear ratio 1:1 SKU: 41204581](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-80-gear-ratio-11-sku-41204581/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 70, gear ratio 4:1 SKU: 41204574](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-70-gear-ratio-41-sku-41204574/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 70, gear ratio 3:1 SKU: 41204573](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-70-gear-ratio-31-sku-41204573/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 70, gear ratio 2:1 SKU: 41204572](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-70-gear-ratio-21-sku-41204572/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 70, gear ratio 1:1 SKU: 41204571](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-70-gear-ratio-11-sku-41204571/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 60, gear ratio 4:1 SKU: 41204564](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-60-gear-ratio-41-sku-41204564/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 60, gear ratio 3:1 SKU: 41204563](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-60-gear-ratio-31-sku-41204563/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 60, gear ratio 2:1 SKU: 41204562](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-60-gear-ratio-21-sku-41204562/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 60, gear ratio 1:1 SKU: 41204561](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-60-gear-ratio-11-sku-41204561/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 30, gear ratio 4:1 SKU: 41204534](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-30-gear-ratio-41-sku-41204534/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 30, gear ratio 3:1 SKU: 41204533](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-30-gear-ratio-31-sku-41204533/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 30, gear ratio 2:1 SKU: 41204532](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-30-gear-ratio-21-sku-41204532/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 30, gear ratio 1:1 SKU: 41204531](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-30-gear-ratio-11-sku-41204531/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 20, gear ratio 4:1 SKU: 41204524](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-20-gear-ratio-41-sku-41204524/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 20, gear ratio 3:1 SKU: 41204523](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-20-gear-ratio-31-sku-41204523/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 20, gear ratio 2:1 SKU: 41204522](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-20-gear-ratio-21-sku-41204522/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 20, gear ratio 1:1 SKU: 41204521](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-20-gear-ratio-11-sku-41204521/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication. Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°. Bearing: Life time min. 15,000h. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting. Permiss. Ambient temperature -10°C bis +90°C. ** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 10, gear ratio 4:1 SKU: 41204514](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-10-gear-ratio-41-sku-41204514/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 10, gear ratio 3:1 SKU: 41204513](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-10-gear-ratio-31-sku-41204513/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 10, gear ratio 2:1 SKU: 41204512](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-10-gear-ratio-21-sku-41204512/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 10, gear ratio 1:1 SKU: 41204511](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-10-gear-ratio-11-sku-41204511/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Bevel gearbox KU/I model L size 30 version 60 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204405](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204404](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204403](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204402](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204401](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204400](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204305](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204305/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204304](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204304/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204303](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204303/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204302](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204302/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204301](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204301/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204300](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204300/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204106](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204106/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204105](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204105/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204104](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204104/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204103](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204102](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204101](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204100](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204006](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204006/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204005](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204005/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204004](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204004/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204003](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204003/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204002](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204002/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204001](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204001/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204000](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204000/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203806](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203806/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Worm gear unit ZM/I version A size 63 i=4.83:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102100](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i4-831-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102100/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 50, i=39,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101314](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-50-i3901-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101314/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 50, i=72,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101313](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-50-i7201-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101313/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 50, i=72,0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101312](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-50-i7201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101312/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=83:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101311](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i831-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101311/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=62.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101310](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i62-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101310/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=51.0 1" (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101309](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i51-0-1-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101309/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=38.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101308](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i38-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101308/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=29.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101307](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i29-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101307/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=25.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101306](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i25-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101306/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=19.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101305](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i19-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101305/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=14.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101304](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i14-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101304/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=12.75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101303](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i12-751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101303/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=9.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101302](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i9-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101302/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=7.25:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101301](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i7-251-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101301/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=4.83:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101300](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i4-831-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101300/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 50, i=72,0:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101127](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-50-i7201-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4210-2/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 50, i=72,0:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101126](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-50-i7201-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4210/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 50, i=72,0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101125](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-50-i7201-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101125/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 50, i=72,0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101124](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-50-i7201-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101124/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=83:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101123](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i831-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101123/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=83:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101122](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i831-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101122/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=62.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101121](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i62-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101121/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=62.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101120](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i62-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101120/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=51.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101119](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i51-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101119/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=51.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101118](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i51-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101118/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=38.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101117](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i38-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101117/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=38.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101116](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i38-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101116/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=29.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101115](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i29-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101115/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=29.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101114](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i29-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101114/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=25.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101113](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i25-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101113/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=25.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101112](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i25-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101112/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=19.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101111](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i19-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101111/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=19.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101110](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i19-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101110/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=14.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101109](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i14-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101109/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=14.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101108](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i14-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101108/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=12.75:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101107](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i12-751-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101107/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=12.75:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101106](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i12-751-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101106/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=9.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101105](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i9-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101105/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=9.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101104](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i9-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101104/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=7.25:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101103](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i7-251-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101103/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=7.25:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101102](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i7-251-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101102/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=4.83:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101101](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i4-831-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101101/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=4.83:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101100](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i4-831-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101100/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 40, i=40,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100314](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-40-i4001-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100314/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 40, i=72,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100313](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-40-i7201-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100313/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 40, i=72,0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100312](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-40-i7201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100312/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=82.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100311](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i82-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100311/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=63.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100310](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i63-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100310/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=52.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100309](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i52-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100309/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=39.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100308](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i39-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100308/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=29.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100307](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i29-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100307/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=26.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100306](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i26-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100306/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=19.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100305](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i19-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100305/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=14.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100304](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i14-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100304/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=13.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100303](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i13-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100303/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=9.75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100302](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i9-751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100302/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=7.25:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100301](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i7-251-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100301/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=4.83:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100300](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i4-831-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100300/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 40, i=72,0:1 output flange side 6 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100127](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-40-i7201-output-flange-side-6-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4210/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 40, i=72,0:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100126](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-40-i7201-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4210/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 40, i=72,0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100125](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-40-i7201-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100125/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 40, i=72,0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100124](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-40-i7201-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100124/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=82.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100123](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i82-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100123/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=82.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100122](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i82-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100122/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=63.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100121](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i63-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100121/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=63.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100120](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i63-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100120/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=52.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100119](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i52-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100119/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=52.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100118](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i52-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100118/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=39.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100117](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i39-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100117/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=39.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100116](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i39-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100116/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=29.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100115](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i29-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100115/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=29.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100114](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i29-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100114/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=26.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100113](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i26-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100113/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=26.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100112](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i26-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100112/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=19.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100111](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i19-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100111/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=19.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100110](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i19-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100110/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=14.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100109](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i14-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100109/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=14.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100108](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i14-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100108/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=13.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100107](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i13-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100107/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=13.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100106](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i13-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100106/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=9.75:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100105](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i9-751-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100105/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=9.75:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100104](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i9-751-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100104/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=7.25:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100103](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i7-251-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100103/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=7.25:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100102](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i7-251-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100102/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=4.83:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100101](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i4-831-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100101/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=4.83:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100100](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i4-831-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100100/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Bevel gearbox KU/I model H size 30 version 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207405](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207404](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207403](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207402](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207401](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207400](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207305](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207305/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207304](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207304/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207303](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207303/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207302](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207302/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207301](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207301/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207300](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207300/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207106](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207106/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Gearbox GE/I i=720:1 matching with motors 43040100 43040300 43040500 SKU: 43031501](https://maedler.in/product/gearbox-ge-i-i7201-matching-with-motors-43040100-43040300-43040500-sku-43031501/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=540:1 matching with motors 43040100 43040300 43040500 SKU: 43031401](https://maedler.in/product/gearbox-ge-i-i5401-matching-with-motors-43040100-43040300-43040500-sku-43031401/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=480:1 matching with motors 43040100 43040300 43040500 SKU: 43031301](https://maedler.in/product/gearbox-ge-i-i4801-matching-with-motors-43040100-43040300-43040500-sku-43031301/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=405:1 matching with motors 43040100 43040300 43040500 SKU: 43031201](https://maedler.in/product/gearbox-ge-i-i4051-matching-with-motors-43040100-43040300-43040500-sku-43031201/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=360:1 matching with motors 43040100 43040300 43040500 SKU: 43031101](https://maedler.in/product/gearbox-ge-i-i3601-matching-with-motors-43040100-43040300-43040500-sku-43031101/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=270:1 matching with motors 43040100 43040300 43040500 SKU: 43031001](https://maedler.in/product/gearbox-ge-i-i2701-matching-with-motors-43040100-43040300-43040500-sku-43031001/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=240:1 matching with motors 43040100 43040300 43040500 SKU: 43030901](https://maedler.in/product/gearbox-ge-i-i2401-matching-with-motors-43040100-43040300-43040500-sku-43030901/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=180:1 matching with motors 43040100 43040300 43040500 SKU: 43030801](https://maedler.in/product/gearbox-ge-i-i1801-matching-with-motors-43040100-43040300-43040500-sku-43030801/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=135:1 matching with motors 43040100 43040300 43040500 SKU: 43030701](https://maedler.in/product/gearbox-ge-i-i1351-matching-with-motors-43040100-43040300-43040500-sku-43030701/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=120:1 matching with motors 43040100 43040300 43040500 SKU: 43030601](https://maedler.in/product/gearbox-ge-i-i1201-matching-with-motors-43040100-43040300-43040500-sku-43030601/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=90:1 matching with motors 43040100 43040300 43040500 SKU: 43030501](https://maedler.in/product/gearbox-ge-i-i901-matching-with-motors-43040100-43040300-43040500-sku-43030501/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=60:1 matching with motors 43040100 43040300 43040500 SKU: 43030401](https://maedler.in/product/gearbox-ge-i-i601-matching-with-motors-43040100-43040300-43040500-sku-43030401/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=45:1 matching with motors 43040100 43040300 43040500 SKU: 43030301](https://maedler.in/product/gearbox-ge-i-i451-matching-with-motors-43040100-43040300-43040500-sku-43030301/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=30:1 matching with motors 43040100 43040300 43040500 SKU: 43030201](https://maedler.in/product/gearbox-ge-i-i301-matching-with-motors-43040100-43040300-43040500-sku-43030201/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=15:1 matching with motors 43040100 43040300 43040500 SKU: 43030101](https://maedler.in/product/gearbox-ge-i-i151-matching-with-motors-43040100-43040300-43040500-sku-43030101/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Worm gearbox ZM/I, type HL, size 80, i=43,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103314](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-80-i4301-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103314/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 80, i=72:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103313](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-80-i721-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103313/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 80, i=72:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103312](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-80-i721-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103312/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=82:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103311](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i821-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103311/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=62:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103310](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i621-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103310/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=53:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103309](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i531-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103309/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=40:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103308](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i401-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103308/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=30:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103307](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i301-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103307/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=26.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103306](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i26-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103306/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=20:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103305](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103305/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=15:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103304](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103304/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=13.25:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103303](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i13-251-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103303/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=10:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103302](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i101-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103302/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=7.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103301](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i7-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103301/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103300](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103300/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 80, i=72:1 output flange side 6 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103127](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-80-i721-output-flange-side-6-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-421031/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 80, i=72:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103126](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-80-i721-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-421031/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 80, i=72:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103125](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-80-i721-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103125/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 80, i=72:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103124](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-80-i721-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103124/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=82:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103123](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i821-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103123/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=82:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103122](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i821-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103122/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=62:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103121](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i621-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103121/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=62:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103120](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i621-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103120/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=53:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103119](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i531-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103119/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=53:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103118](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i531-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103118/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=40:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103117](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i401-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103117/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=40:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103116](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i401-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103116/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=30:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103115](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i301-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103115/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=30:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103114](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i301-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103114/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=26.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103113](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i26-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103113/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=26.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103112](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i26-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103112/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=20:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103111](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i201-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103111/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=20:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103110](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i201-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103110/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=15:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103109](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i151-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103109/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=15:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103108](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i151-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103108/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=13.25:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103107](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i13-251-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103107/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=13.25:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103106](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i13-251-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103106/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=10:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103105](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i101-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103105/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=10:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103104](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i101-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103104/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=7.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103103](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i7-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103103/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=7.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103102](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i7-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103102/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103101](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103101/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103100](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103100/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 63, i=40,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102314](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-63-i4001-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102314/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 63, i=72:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102313](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-63-i721-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102313/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 63, i=72:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102312](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-63-i721-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102312/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=82:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102311](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i821-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102311/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=61.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102310](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i61-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102310/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=51.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102309](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i51-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102309/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=39.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102308](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i39-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102308/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=29.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102307](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i29-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102307/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=25.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102306](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i25-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102306/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=19.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102305](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i19-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102305/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=14.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102304](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i14-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102304/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=12.75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102303](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i12-751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102303/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=9.75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102302](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i9-751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102302/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=7.25:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102301](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i7-251-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102301/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=4.83:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102300](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i4-831-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102300/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 63, i=72:1 output flange side 6 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102127](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-63-i721-output-flange-side-6-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-421021/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 63, i=72:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102126](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-63-i721-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-421021/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 63, i=72:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102125](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-63-i721-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102125/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 63, i=72:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102124](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-63-i721-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102124/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=82.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102123](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i82-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102123/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=82.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102122](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i82-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102122/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=61.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102121](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i61-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102121/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=61.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102120](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i61-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102120/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=51.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102119](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i51-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102119/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=51.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102118](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i51-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102118/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=39.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102117](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i39-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102117/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=39.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102116](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i39-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102116/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=29.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102115](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i29-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102115/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=29.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102114](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i29-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102114/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=25.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102113](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i25-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102113/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=25.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102112](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i25-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102112/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=19.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102111](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i19-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102111/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=19.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102110](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i19-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102110/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=14.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102109](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i14-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102109/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=14.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102108](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i14-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102108/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=12.75:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102107](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i12-751-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102107/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=12.75:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102106](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i12-751-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102106/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=9.75:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102105](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i9-751-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102105/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=9.75:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102104](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i9-751-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102104/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=7.25:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102103](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i7-251-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102103/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=7.25:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102102](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i7-251-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102102/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=4.83:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102101](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i4-831-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102101/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm geared motor HMD/I basic version gearbox size 063 n2=46.7 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805540](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n246-7-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=38.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805535](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n238-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=31.1 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805530](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n231-1-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=26.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805525](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n226-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=20.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805520](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n220-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=18.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805515](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n218-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=13.4 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805510](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n213-4-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=9.4 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805505](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n29-4-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Torque arm for worm geared motor HMD/I gearbox size 050 SKU: 43805500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-050-sku-43805500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 050 diameter 123mm overall height 47mm SKU: 43805400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-050-diameter-123mm-overall-height-47mm-sku-43805400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 050 width 113mm overall height 138.5mm SKU: 43805300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-050-width-113mm-overall-height-138-5mm-sku-43805300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 050 diameter 25mm overall length 200mm SKU: 43805200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-050-diameter-25mm-overall-length-200mm-sku-43805200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 050 diameter 25mm overall length 146mm SKU: 43805100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-050-diameter-25mm-overall-length-146mm-sku-43805100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Torque arm for worm geared motor HMD/I gearbox size 045 SKU: 43804500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-045-sku-43804500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 045 diameter 110mm overall height 2.,5mm SKU: 43804400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-045-diameter-110mm-overall-height-2-5mm-sku-43804400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 045 width 98mm overall height 121mm SKU: 43804300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-045-width-98mm-overall-height-121mm-sku-43804300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 045 diameter 18mm overall length 151mm SKU: 43804200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-045-diameter-18mm-overall-length-151mm-sku-43804200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 045 diameter 18mm overall length 113mm SKU: 43804100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-045-diameter-18mm-overall-length-113mm-sku-43804100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Worm geared motor HMD/I basic version gearbox size 045 n2=200 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803760](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2200-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=140 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803755](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2140-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=100 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803750](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2100-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=78 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803745](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n278-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=67 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803740](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n267-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=54 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803735](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n254-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=46.7 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803730](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n246-7-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=38.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803725](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n238-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=31.1 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803720](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n231-1-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=20.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803715](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n220-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=17.5 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803710](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n217-5-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=14.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803705](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n214-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Torque arm for worm geared motor HMD/I gearbox size 030 SKU: 43803500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-030-sku-43803500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 030 diameter 80mm overall height 20.5mm SKU: 43803400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-030-diameter-80mm-overall-height-20-5mm-sku-43803400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 030 width 78mm overall height 94mm SKU: 43803300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-030-width-78mm-overall-height-94mm-sku-43803300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 030 diameter 14mm overall length 126mm SKU: 43803200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-030-diameter-14mm-overall-length-126mm-sku-43803200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 030 diameter 14mm overall length 94.5mm SKU: 43803100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-030-diameter-14mm-overall-length-94-5mm-sku-43803100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Worm geared motor HMD/I basic version gearbox size 045 n2=200 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802560](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2200-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=140 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802555](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2140-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=100 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802550](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2100-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=67 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802545](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n267-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=50 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802540](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n250-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=38.9 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802535](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n238-9-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=32.6 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802530](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n232-6-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=25 rpm 0.25kW 230/400V. 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802525](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n225-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=20.9 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802520](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n220-9-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=17.5 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802515](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n217-5-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=13.4 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802510](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n213-4-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=9.6 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802505](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n29-6-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=200 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801855](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2200-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=140 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801850](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2140-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=100 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801845](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2100-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=70 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801840](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n270-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=50 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801835](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n250-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=37.8 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801830](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n237-8-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=30.4 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801825](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n230-4-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=20.6 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801820](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n220-6-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=17.5 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801815](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n217-5-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=14 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801810](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n214-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=9.6 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801805](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n29-6-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=200 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801255](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2200-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=140 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801250](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2140-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=93 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801245](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n293-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=70 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801240](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n270-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=50 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801235](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n250-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=46.7 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801230](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n246-7-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=35 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801225](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n235-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=30.4 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801220](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n230-4-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=20.6 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801215](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n220-6-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=17.5 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801210](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n217-5-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=12.9 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801205](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n212-9-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=200 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800955](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2200-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=140 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800950](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2140-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=93 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800945](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n293-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=70 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800940](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n270-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=46.7 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800935](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n246-7-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=35 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800930](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n235-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=23 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800925](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n223-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=19.6 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800920](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n219-6-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=15 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800915](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n215-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=12.9 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800910](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n212-9-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=9 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800905](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n29-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Operating capacitor KST 2.0µF 400V SKU: 43635200](https://maedler.in/product/operating-capacitor-kst-2-0%c2%b5f-400v-sku-43635200/): Aluminium housing, metal-polypropylene. For 30.000 operating hours. According to VDE. 2.0 µF. The capacitors have a protective cap made from aluminium and a 180mm cable connected on the side. On the bottom there is a mounting screw with toothed lock washer and nut. Technical Data: Capacity tolerance ±10%. Frequency 50 to 60 Hz. Voltage 400 V. Loss < 0.3%. Temperature range -25 to +85°C. Insulation test voltage (2 Sec.) 2.5 kV (to ground). - [DC motor 24V matching with gearbox GE/I SKU: 43040500](https://maedler.in/product/dc-motor-24v-matching-with-gearbox-ge-i-sku-43040500/): DC motor for 12 Volt or 24 Volt. Pinion pressed onto motor shaft. Free lead ends. Sense of rotation can be changed by swopping leads over. Please realize: The gearbox has to be ordered seperately. - [DC motor 12V matching with gearbox GE/I SKU: 43040300](https://maedler.in/product/dc-motor-12v-matching-with-gearbox-ge-i-sku-43040300/): DC motor for 12 Volt or 24 Volt. Pinion pressed onto motor shaft. Free lead ends. Sense of rotation can be changed by swopping leads over. Please realize: The gearbox has to be ordered seperately. - [Capacitor motor 230V 50Hz matching with gearbox GE/I without capacitor SKU: 43040100](https://maedler.in/product/capacitor-motor-230v-50hz-matching-with-gearbox-ge-i-without-capacitor-sku-43040100/): For 230 V, 50 Hz, direction of rotation reversible. Pinion milled into motor shaft. The cable gland of the terminal box can be moved 4 x 90°. Please note: At continuous operation the motor heats up to 70°C. Please realize: The gearbox and capacitor have to be ordered seperately. - [Gearbox GE/I i=9720:1 matching with motors 43040100 43040300 43040500 SKU: 43033101](https://maedler.in/product/gearbox-ge-i-i97201-matching-with-motors-43040100-43040300-43040500-sku-43033101/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=8640:1 matching with motors 43040100 43040300 43040500 SKU: 43033001](https://maedler.in/product/gearbox-ge-i-i86401-matching-with-motors-43040100-43040300-43040500-sku-43033001/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=7290:1 matching with motors 43040100 43040300 43040500 SKU: 43032901](https://maedler.in/product/gearbox-ge-i-i72901-matching-with-motors-43040100-43040300-43040500-sku-43032901/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=6480:1 matching with motors 43040100 43040300 43040500 SKU: 43032801](https://maedler.in/product/gearbox-ge-i-i64801-matching-with-motors-43040100-43040300-43040500-sku-43032801/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=4860:1 matching with motors 43040100 43040300 43040500 SKU: 43032701](https://maedler.in/product/gearbox-ge-i-i48601-matching-with-motors-43040100-43040300-43040500-sku-43032701/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=4320:1 matching with motors 43040100 43040300 43040500 SKU: 43032601](https://maedler.in/product/gearbox-ge-i-i43201-matching-with-motors-43040100-43040300-43040500-sku-43032601/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=3645:1 matching with motors 43040100 43040300 43040500 SKU: 43032501](https://maedler.in/product/gearbox-ge-i-i36451-matching-with-motors-43040100-43040300-43040500-sku-43032501/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=3240:1 matching with motors 43040100 43040300 43040500 SKU: 43032401](https://maedler.in/product/gearbox-ge-i-i32401-matching-with-motors-43040100-43040300-43040500-sku-43032401/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=2430:1 matching with motors 43040100 43040300 43040500 SKU: 43032301](https://maedler.in/product/gearbox-ge-i-i24301-matching-with-motors-43040100-43040300-43040500-sku-43032301/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=2160:1 matching with motors 43040100 43040300 43040500 SKU: 43032201](https://maedler.in/product/gearbox-ge-i-i21601-matching-with-motors-43040100-43040300-43040500-sku-43032201/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=1620:1 matching with motors 43040100 43040300 43040500 SKU: 43032101](https://maedler.in/product/gearbox-ge-i-i16201-matching-with-motors-43040100-43040300-43040500-sku-43032101/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=1440:1 matching with motors 43040100 43040300 43040500 SKU: 43032001](https://maedler.in/product/gearbox-ge-i-i14401-matching-with-motors-43040100-43040300-43040500-sku-43032001/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=1215:1 matching with motors 43040100 43040300 43040500 SKU: 43031901](https://maedler.in/product/gearbox-ge-i-i12151-matching-with-motors-43040100-43040300-43040500-sku-43031901/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=1080:1 matching with motors 43040100 43040300 43040500 SKU: 43031801](https://maedler.in/product/gearbox-ge-i-i10801-matching-with-motors-43040100-43040300-43040500-sku-43031801/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=960:1 matching with motors 43040100 43040300 43040500 SKU: 43031701](https://maedler.in/product/gearbox-ge-i-i9601-matching-with-motors-43040100-43040300-43040500-sku-43031701/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=810:1 matching with motors 43040100 43040300 43040500 SKU: 43031601](https://maedler.in/product/gearbox-ge-i-i8101-matching-with-motors-43040100-43040300-43040500-sku-43031601/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Worm geared motor HMD/II basic version gearbox size 063 n2=17.5 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903710](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n217-5-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=14.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903705](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n214-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Torque support for worm gear motor HMD/II gearbox size 030 SKU: 43903500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-030-sku-43903500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Square shaped output flange for worm gear motor HMD/II gearbox size 030 SKU: 43903300](https://maedler.in/product/square-shaped-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-030-sku-43903300/): Material: Aluminium. Square flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 033 00, Output-Side Flange, 70 x 70 mm - [Worm geared motor HMD/II basic version gearbox size 045 n2=200 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902560](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2200-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=140 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902555](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2140-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=100 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902550](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2100-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=67 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902545](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n267-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=50 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902540](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n250-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=38.9 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902535](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n238-9-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=32.6 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902530](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n232-6-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=25 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902525](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n225-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=20.9 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902520](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n220-9-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=17.5 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902515](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n217-5-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=13.4 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902510](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n213-4-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=9.6 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902505](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n29-6-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=200 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901855](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2200-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=140 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901850](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2140-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=100 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901845](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2100-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=70 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901840](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n270-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=50 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901835](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n250-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=37.8 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901830](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n237-8-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=30.4 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901825](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n230-4-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=20.6 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901820](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n220-6-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=17.5 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901815](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n217-5-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=14 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901810](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n214-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=9.6 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901805](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n29-6-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=200 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901255](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2200-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=140 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901250](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2140-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=93 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901245](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n293-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=70 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901240](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n270-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=50 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901235](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n250-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=46.7 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901230](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n246-7-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=35 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901225](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n235-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=30.4 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901220](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n230-4-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=20.6 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901215](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n220-6-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=17.5 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901210](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n217-5-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=12.9 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901205](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n212-9-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=200 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900955](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2200-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=140 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900950](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2140-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=93 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900945](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n293-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=70 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900940](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n270-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=46.7 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900935](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n246-7-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=35 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900930](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n235-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=23 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900925](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n223-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=19.6 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900920](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n219-6-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=15 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900915](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n215-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=12.9 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900910](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n212-9-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=9 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900905](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n29-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/I basic version gearbox size 085 n2=204 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811555](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n2204-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=143 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811550](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n2143-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=102 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811545](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n2102-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=95 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811540](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n295-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=75 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811535](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n275-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=72 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811530](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n272-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=65 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811525](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n265-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=51 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811520](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n251-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=37.6 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811515](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n237-6-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=31.1 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811510](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n231-1-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=27.5 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811505](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n227-5-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=144 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811070](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n2144-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=103 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811065](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n2103-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=96 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811060](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n296-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=76 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811055](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n276-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=65 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811050](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n265-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=60 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811045](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n260-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=51 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811040](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n251-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=48.0 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811035](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n248-0-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=40.0 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811030](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n240-0-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=37.9 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811025](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n237-9-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=31.3 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811020](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n231-3-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=27.7 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811015](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n227-7-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=21.5 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811010](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n221-5-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=19.5 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811005](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n219-5-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Torque arm for worm geared motor HMD/I gearbox size 085 SKU: 43808500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-085-sku-43808500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 085 diameter 205mm overall height 40mm SKU: 43808400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-085-diameter-205mm-overall-height-40mm-sku-43808400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 085 width 180mm overall height 236.5mm SKU: 43808300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-085-width-180mm-overall-height-236-5mm-sku-43808300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 085 diameter 35mm overall length 282mm SKU: 43808200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-085-diameter-35mm-overall-length-282mm-sku-43808200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 085 diameter 35mm overall length 214mm SKU: 43808100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-085-diameter-35mm-overall-length-214mm-sku-43808100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Worm geared motor HMD/I basic version gearbox size 050 n2=144 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807560](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n2144-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=103 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807555](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n2103-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=96 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807550](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n296-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=76 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807545](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n276-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=60 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807540](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n260-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=48.0 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807535](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n248-0-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=37.9 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807530](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n237-9-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=31.3 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807525](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n231-3-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=27.7 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807520](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n227-7-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=21.5 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807515](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n221-5-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=19.5 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807510](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n219-5-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=15.0 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807505](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n215-0-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Torque arm for worm geared motor HMD/I gearbox size 063 SKU: 43806500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-063-sku-43806500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 063 diameter 175mm overall height 41mm SKU: 43806400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-063-diameter-175mm-overall-height-41mm-sku-43806400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 063 width 133mm overall height 170mm SKU: 43806300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-063-width-133mm-overall-height-170mm-sku-43806300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 063 diameter 25mm, overall length 246,4mm SKU: 43806200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-063-diameter-25mm-overall-length-2464mm-sku-43806200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 063 diameter 25mm overall length 190mm SKU: 43806100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-063-diameter-25mm-overall-length-190mm-sku-43806100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Worm geared motor HMD/I basic version gearbox size 050 n2=140 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805560](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n2140-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=93 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805555](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n293-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=74 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805550](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n274-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=58 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805545](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n258-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Sliding hub FA size 4 torque adjustable 90-600 Nm outer diameter 140 mm max. bore: 55mm SKU: 61210400](https://maedler.in/product/sliding-hub-fa-size-4-torque-adjustable-90-600-nm-outer-diameter-140-mm-max-bore-55mm-sku-61210400/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 3 72x115x4mm SKU: 61210301](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-3-72x115x4mm-sku-61210301/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 3 torque adjustable 50-300 Nm outer diameter 115 mm max. bore: 45mm SKU: 61210300](https://maedler.in/product/sliding-hub-fa-size-3-torque-adjustable-50-300-nm-outer-diameter-115-mm-max-bore-45mm-sku-61210300/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA and FA-K size 2 58x88x3mm SKU: 61210201](https://maedler.in/product/friction-disc-for-sliding-hub-fa-and-fa-k-size-2-58x88x3mm-sku-61210201/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 2 torque adjustable 25-140 Nm outer diameter 88 mm max. bore: 35mm SKU: 61210200](https://maedler.in/product/sliding-hub-fa-size-2-torque-adjustable-25-140-nm-outer-diameter-88-mm-max-bore-35mm-sku-61210200/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA and FA-K size 1 44x68x3mm SKU: 61210111](https://maedler.in/product/friction-disc-for-sliding-hub-fa-and-fa-k-size-1-44x68x3mm-sku-61210111/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 1 torque adjustable 20-75 Nm outer diameter 68 mm max. bore: 25mm SKU: 61210110](https://maedler.in/product/sliding-hub-fa-size-1-torque-adjustable-20-75-nm-outer-diameter-68-mm-max-bore-25mm-sku-61210110/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA and FA-K size 01 40x58x3mm SKU: 61210101](https://maedler.in/product/friction-disc-for-sliding-hub-fa-and-fa-k-size-01-40x58x3mm-sku-61210101/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 01 torque adjustable 5-35 Nm outer diameter 58 mm max. bore: 22mm SKU: 61210100](https://maedler.in/product/sliding-hub-fa-size-01-torque-adjustable-5-35-nm-outer-diameter-58-mm-max-bore-22mm-sku-61210100/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA and FA-K size 0 35x45x2.5mm SKU: 61210011](https://maedler.in/product/friction-disc-for-sliding-hub-fa-and-fa-k-size-0-35x45x2-5mm-sku-61210011/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 0 torque adjustable 2-10 Nm outer diameter 45 mm max. bore: 20mm SKU: 61210010](https://maedler.in/product/sliding-hub-fa-size-0-torque-adjustable-2-10-nm-outer-diameter-45-mm-max-bore-20mm-sku-61210010/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 00 16x30x2.5mm SKU: 61210001](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-00-16x30x2-5mm-sku-61210001/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 00 torque adjustable 0.5-5 Nm outer diameter 30mm max. bore: 10mm SKU: 61210000](https://maedler.in/product/sliding-hub-fa-size-00-torque-adjustable-0-5-5-nm-outer-diameter-30mm-max-bore-10mm-sku-61210000/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Sliding hub FS torque adjustable 230-1360 Nm with pilot bore 24H8 outer diameter 178mm max. bore: 60mm bush length 20.6mm SKU: 61208000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-230-1360-nm-with-pilot-bore-24h8-outer-diameter-178mm-max-bore-60mm-bush-length-20-6mm-sku-61208000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 612070-612080 SKU: 61207500](https://maedler.in/product/friction-disc-for-sliding-hub-fs-612070-612080-sku-61207500/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 115-690 Nm with pilot bore 24H8 outer diameter 178mm max. bore: 60mm bush length 20.6mm SKU: 61207000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-115-690-nm-with-pilot-bore-24h8-outer-diameter-178mm-max-bore-60mm-bush-length-20-6mm-sku-61207000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 100-600 Nm with pilot bore 19H8 outer diameter 127mm max. bore 40mm bush length 16mm SKU: 61206000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-100-600-nm-with-pilot-bore-19h8-outer-diameter-127mm-max-bore-40mm-bush-length-16mm-sku-61206000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 612050-612060 SKU: 61205500](https://maedler.in/product/friction-disc-for-sliding-hub-fs-612050-612060-sku-61205500/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 50-300 Nm with pilot bore 19H8 outer diameter 127mm max. bore: 40mm bush length 16mm SKU: 61205000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-50-300-nm-with-pilot-bore-19h8-outer-diameter-127mm-max-bore-40mm-bush-length-16mm-sku-61205000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 40-180 Nm with pilot bore 13H8 outer diameter 90mm max. bore: 25mm bush length 13.7mm SKU: 61204000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-40-180-nm-with-pilot-bore-13h8-outer-diameter-90mm-max-bore-25mm-bush-length-13-7mm-sku-61204000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 612030-612040 SKU: 61203500](https://maedler.in/product/friction-disc-for-sliding-hub-fs-612030-612040-sku-61203500/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 20-90 Nm with pilot bore 13H8 outer diameter 90mm max. bore: 25mm bush length 13.7mm SKU: 61203000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-20-90-nm-with-pilot-bore-13h8-outer-diameter-90mm-max-bore-25mm-bush-length-13-7mm-sku-61203000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 14-68 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm SKU: 61202000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-14-68-nm-with-pilot-bore-10h8-outer-diameter-64mm-max-bore-22mm-bush-length-10-3mm-sku-61202000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 612010-612020 SKU: 61201500](https://maedler.in/product/friction-disc-for-sliding-hub-fs-612010-612020-sku-61201500/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm SKU: 61201000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-7-34-nm-with-pilot-bore-10h8-outer-diameter-64mm-max-bore-22mm-bush-length-10-3mm-sku-61201000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 61200500-61200600 SKU: 61200700](https://maedler.in/product/friction-disc-for-sliding-hub-fs-61200500-61200600-sku-61200700/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 4-20 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm lock washer without edges SKU: 61200600](https://maedler.in/product/sliding-hub-fs-torque-adjustable-4-20-nm-with-pilot-bore-outer-diameter-45mm-max-bore-20mm-bush-length-4-2mm-lock-washer-without-edges-sku-61200600/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 2-10 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm lock washer without edges SKU: 61200500](https://maedler.in/product/sliding-hub-fs-torque-adjustable-2-10-nm-with-pilot-bore-outer-diameter-45mm-max-bore-20mm-bush-length-4-2mm-lock-washer-without-edges-sku-61200500/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 61200000-61200100 SKU: 61200300](https://maedler.in/product/friction-disc-for-sliding-hub-fs-61200000-61200100-sku-61200300/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 1-10 Nm with pilot bore outer diameter 30mm with 4 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges SKU: 61200100](https://maedler.in/product/sliding-hub-fs-torque-adjustable-1-10-nm-with-pilot-bore-outer-diameter-30mm-with-4-disc-springs-max-bore-10mm-bush-length-4-2mm-lock-washer-without-edges-sku-61200100/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 0.5-5 Nm with pilot bore outer diameter 30mm with 2 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges SKU: 61200000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-0-5-5-nm-with-pilot-bore-outer-diameter-30mm-with-2-disc-springs-max-bore-10mm-bush-length-4-2mm-lock-washer-without-edges-sku-61200000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Worm geared motor HMD/II basic version gearbox size 063 n2=143 rpm 1.5kW, 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915050](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n2143-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=102 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915045](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n2102-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=95 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915040](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n295-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=75 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915035](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n275-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=72 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915030](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n272-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=65 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915025](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n265-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=51 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915020](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n251-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=37.6 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915015](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n237-6-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=31.1 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915010](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n231-1-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=27.5 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915005](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n227-5-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=144 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911070](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n2144-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=103 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911065](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n2103-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=96 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911060](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n296-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=76 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911055](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n276-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=65 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911050](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n265-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=60 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911045](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n260-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=51 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911040](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n251-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=48,0 rpm, 1,1kW, 230/400V, 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911035](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n2480-rpm-11kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=40.0 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911030](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n240-0-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=37,9 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911025](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n2379-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=31.3 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911020](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n231-3-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=27.7 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911015](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n227-7-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=21.5 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911010](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n221-5-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=19.5 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911005](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n219-5-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Torque support for worm gear motor HMD/II gearbox size 085 SKU: 43908500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-085-sku-43908500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Round output flange for worm gear motor HMD/II gearbox size 085 SKU: 43908400](https://maedler.in/product/round-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-085-sku-43908400/): Material: Aluminium. Round flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 044 00, Output-Side Flange, Ø 140 mm. - [Worm geared motor HMD/II basic version gearbox size 050 n2=144 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907560](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n2144-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=103 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907555](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n2103-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=96 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907550](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n296-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=76 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907545](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n276-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=60 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907540](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n260-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=48.0 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907535](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n248-0-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=37.9 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907530](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n237-9-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=33.3 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907525](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n233-3-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=27.7 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907520](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n227-7-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=21.5 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907515](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n221-5-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=19.5 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907510](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n219-5-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=15.0 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907505](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n215-0-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Torque support for worm gear motor HMD/II gearbox size 063 SKU: 43906500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-063-sku-43906500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Round output flange for worm gear motor HMD/II gearbox size 063 SKU: 43906400](https://maedler.in/product/round-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-063-sku-43906400/): Material: Aluminium. Round flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 044 00, Output-Side Flange, Ø 140 mm. - [Square shaped output flange for worm gear motor HMD/II gearbox size 063 SKU: 43906300](https://maedler.in/product/square-shaped-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-063-sku-43906300/): Material: Aluminium. Square flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 033 00, Output-Side Flange, 70 x 70 mm - [Worm geared motor HMD/II basic version gearbox size 050 n2=140 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905560](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n2140-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=93 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905555](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n293-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=74 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905550](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n274-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=58 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905545](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n258-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=46.7 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905540](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n246-7-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=38.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905535](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n238-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=31.1 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905530](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n231-1-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=26.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905525](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n226-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=20.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905520](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n220-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=18.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905515](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n218-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=13.4 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905510](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n213-4-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=9.4 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905505](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n29-4-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Torque support for worm gear motor HMD/II gearbox size 050 SKU: 43905500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-050-sku-43905500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Round output flange for worm gear motor HMD/II gearbox size 050 SKU: 43905400](https://maedler.in/product/round-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-050-sku-43905400/): Material: Aluminium. Round flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 044 00, Output-Side Flange, Ø 140 mm. - [Square shaped output flange for worm gear motor HMD/II gearbox size 050 SKU: 43905300](https://maedler.in/product/square-shaped-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-050-sku-43905300/): Material: Aluminium. Square flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 033 00, Output-Side Flange, 70 x 70 mm - [Torque support for worm gear motor HMD/II gearbox size 045 SKU: 43904500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-045-sku-43904500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Round output flange for worm gear motor HMD/II gearbox size 045 SKU: 43904400](https://maedler.in/product/round-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-045-sku-43904400/): Material: Aluminium. Round flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 044 00, Output-Side Flange, Ø 140 mm. - [Square shaped output flange for worm gear motor HMD/II gearbox size 045 SKU: 43904300](https://maedler.in/product/square-shaped-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-045-sku-43904300/): Material: Aluminium. Square flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 033 00, Output-Side Flange, 70 x 70 mm - [Worm geared motor HMD/II basic version gearbox size 045 n2=200 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903760](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2200-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=140 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903755](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2140-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=100 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903750](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2100-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=78 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903745](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n278-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=67 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903740](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n267-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=54 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903735](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n254-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=46.7 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903730](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n246-7-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=38.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903725](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n238-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=31.1 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903720](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n231-1-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=20.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903715](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n220-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Precision double universal joint WDN with needle bearing DIN808 bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63167000N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-35h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63167000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63166300N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63166300n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63165000N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63165000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 45H7 with keyway DIN 6885-1 on both sides outer diameter 70mm steel SKU: 63157000N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-45h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-70mm-steel-sku-63157000n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 40H7 with keyway DIN 6885-1 on both sides outer diameter 65mm steel SKU: 63156500N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-40h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-65mm-steel-sku-63156500n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 30H7 with keyway DIN 6885-1 on both sides outer diameter 55mm steel SKU: 63155500N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-30h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-55mm-steel-sku-63155500n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 20H7 with keyway DIN 6885-1 on both sides outer diameter 40mm steel SKU: 63154000N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-20h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-40mm-steel-sku-63154000n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 16H7 with keyway DIN 6885-1 on both sides outer diameter 32mm steel SKU: 63153200N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-16h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-32mm-steel-sku-63153200n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 14H7 with keyway DIN 6885-1 on both sides outer diameter 28mm steel SKU: 63152800N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-14h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-28mm-steel-sku-63152800n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 45H7 with keyway DIN 6885-1 on both sides outer diameter 70mm steel SKU: 63137000N](https://maedler.in/product/ball-joint-rw-bore-45h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-70mm-steel-sku-63137000n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 40H7 with keyway DIN 6885-1 on both sides outer diameter 65mm steel SKU: 63136500N](https://maedler.in/product/ball-joint-rw-bore-40h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-65mm-steel-sku-63136500n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 35H7 with keyway DIN 6885-1 on both sides outer diameter 60mm steel SKU: 63136000N](https://maedler.in/product/ball-joint-rw-bore-35h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-60mm-steel-sku-63136000n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 30H7 with keyway DIN 6885-1 on both sides outer diameter 55mm steel SKU: 63135500N](https://maedler.in/product/ball-joint-rw-bore-30h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-55mm-steel-sku-63135500n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 25H7 with keyway DIN 6885-1 on both sides outer diameter 50mm steel SKU: 63135000N](https://maedler.in/product/ball-joint-rw-bore-25h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-50mm-steel-sku-63135000n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 20H7 with keyway DIN 6885-1 on both sides outer diameter 40mm steel SKU: 63134000N](https://maedler.in/product/ball-joint-rw-bore-20h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-40mm-steel-sku-63134000n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 18H7 with keyway DIN 6885-1 on both sides outer diameter 36mm steel SKU: 63133600N](https://maedler.in/product/ball-joint-rw-bore-18h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-36mm-steel-sku-63133600n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 14H7 with keyway DIN 6885-1 on both sides outer diameter 28mm steel SKU: 63132800N](https://maedler.in/product/ball-joint-rw-bore-14h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-28mm-steel-sku-63132800n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 8H7 with keyway DIN 6885-1 on both sides outer diameter 16mm steel SKU: 63131600N](https://maedler.in/product/ball-joint-rw-bore-8h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-16mm-steel-sku-63131600n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Precision single universal joint WE DIN808 bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63127000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-35h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63127000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 105mm steel SKU: 63125200N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-105mm-steel-sku-63125200n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63125000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63125000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 82mm steel SKU: 63124200N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-82mm-steel-sku-63124200n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63124000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63124000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63123700N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63123700n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 68mm steel SKU: 63123300N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-68mm-steel-sku-63123300n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 60mm steel SKU: 63123000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-60mm-steel-sku-63123000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63122000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63122000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 40H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63118000N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-40h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63118000n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63115000N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63115000n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63114000N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63114000n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63112600N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63112600n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63075800N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63075800n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63074100N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63074100n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63074000N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63074000n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 16H7 material steel total length 100mm outer diameter 29mm SKU: 63072900](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-16h7-material-steeltotal-length-100mm-outer-diameter-29mm-sku-63072900/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63072500N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63072500n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63072000N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63072000n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63064700N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63064700n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63063200N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63063200n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63062900N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63062900n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63062000N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63062000n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Cardan joint KE outer diameter 40mm bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63014000N](https://maedler.in/product/cardan-joint-ke-outer-diameter-40mm-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63014000n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 32mm bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63013200N](https://maedler.in/product/cardan-joint-ke-outer-diameter-32mm-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63013200n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 25mm bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63012500N](https://maedler.in/product/cardan-joint-ke-outer-diameter-25mm-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63012500n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 16mm bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63011600N](https://maedler.in/product/cardan-joint-ke-outer-diameter-16mm-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63011600n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 13mm bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63011300N](https://maedler.in/product/cardan-joint-ke-outer-diameter-13mm-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63011300n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Disc spring set LL for safety clutch CM size 55 Nr.61265500 consisting of 6 springs strength L SKU: 61265504](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-55-nr-61265500-consisting-of-6-springs-strength-l-sku-61265504/): Material: Special spring-steel. Fitting to coupling product no. 61265500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set L for safety clutch CM size 55 Nr.61265500 consisting of 5 springs strength L SKU: 61265503](https://maedler.in/product/disc-spring-set-l-for-safety-clutch-cm-size-55-nr-61265500-consisting-of-5-springs-strength-l-sku-61265503/): Material: Special spring-steel. Fitting to coupling product no. 61265500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set M for safety clutch CM size 55 Nr.61265500 consisting of 5 springs strength M SKU: 61265502](https://maedler.in/product/disc-spring-set-m-for-safety-clutch-cm-size-55-nr-61265500-consisting-of-5-springs-strength-m-sku-61265502/): Material: Special spring-steel. Fitting to coupling product no. 61265500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set S for safety clutch CM size 55 Nr.61265500 consisting of 6 springs strength S SKU: 61265501](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-55-nr-61265500-consisting-of-6-springs-strength-s-sku-61265501/): Material: Special spring-steel. Fitting to coupling product no. 61265500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Safety clutch CM Gr. 55 SKU: 61265500](https://maedler.in/product/safety-clutch-cm-gr-55-sku-61265500/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Disc spring set LL for safety clutch CM size 45 Nr.61264500 consisting of 6 springs strength L SKU: 61264504](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-45-nr-61264500-consisting-of-6-springs-strength-l-sku-61264504/): Material: Special spring-steel. Fitting to coupling product no. 61264500. Delivery: Complete set. The disks have to be monted like scetch above / PDF-catalog page. - [Disc spring set L for safety clutch CM size 45 Nr.61264500 consisting of 5 springs strength L SKU: 61264503](https://maedler.in/product/disc-spring-set-l-for-safety-clutch-cm-size-45-nr-61264500-consisting-of-5-springs-strength-l-sku-61264503/): Material: Special spring-steel. Fitting to coupling product no. 61264500. Delivery: Complete set. The disks have to be monted like scetch above / PDF-catalog page. - [Disc spring set M for safety clutch CM size 45 Nr.61264500 consisting of 5 springs strength M SKU: 61264502](https://maedler.in/product/disc-spring-set-m-for-safety-clutch-cm-size-45-nr-61264500-consisting-of-5-springs-strength-m-sku-61264502/): Material: Special spring-steel. Fitting to coupling product no. 61264500. Delivery: Complete set. The disks have to be monted like scetch above / PDF-catalog page. - [Disc spring set S for safety clutch CM size 45 Nr.61264500 consisting of 6 springs strength S SKU: 61264501](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-45-nr-61264500-consisting-of-6-springs-strength-s-sku-61264501/): Material: Special spring-steel. Fitting to coupling product no. 61264500. Delivery: Complete set. The disks have to be monted like scetch above / PDF-catalog page. - [Safety clutch CM Gr. 45 SKU: 61264500](https://maedler.in/product/safety-clutch-cm-gr-45-sku-61264500/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Disc spring set LL for safety clutch CM size 35 Nr.61263500 consisting of 6 springs strength L SKU: 61263504](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-35-nr-61263500-consisting-of-6-springs-strength-l-sku-61263504/): Material: Special spring-steel. Fitting to coupling product no. 61263500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set L for safety clutch CM size 35 Nr.61263500 consisting of 5 springs strength L SKU: 61263503](https://maedler.in/product/disc-spring-set-l-for-safety-clutch-cm-size-35-nr-61263500-consisting-of-5-springs-strength-l-sku-61263503/): Material: Special spring-steel. Fitting to coupling product no. 61263500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set M for safety clutch CM size 35 Nr.61263500 consisting of 5 springs strength M SKU: 61263502](https://maedler.in/product/disc-spring-set-m-for-safety-clutch-cm-size-35-nr-61263500-consisting-of-5-springs-strength-m-sku-61263502/): Material: Special spring-steel. Fitting to coupling product no. 61263500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set S for safety clutch CM size 35 Nr.61263500 consisting of 6 springs strength S SKU: 61263501](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-35-nr-61263500-consisting-of-6-springs-strength-s-sku-61263501/): Material: Special spring-steel. Fitting to coupling product no. 61263500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Safety clutch CM Gr. 35 SKU: 61263500](https://maedler.in/product/safety-clutch-cm-gr-35-sku-61263500/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Disc spring set LL for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength L SKU: 61262504](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-25-nr-61262500-consisting-of-6-springs-strength-l-sku-61262504/): Material: Special spring-steel. Fitting to coupling product no. 61262500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set L for safety clutch CM size 25 Nr.61262500 consisting of 5 springs strength L SKU: 61262503](https://maedler.in/product/disc-spring-set-l-for-safety-clutch-cm-size-25-nr-61262500-consisting-of-5-springs-strength-l-sku-61262503/): Material: Special spring-steel. Fitting to coupling product no. 61262500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set M for safety clutch CM size 25 Nr.61262500 consisting of 5 springs strength M SKU: 61262502](https://maedler.in/product/disc-spring-set-m-for-safety-clutch-cm-size-25-nr-61262500-consisting-of-5-springs-strength-m-sku-61262502/): Material: Special spring-steel. Fitting to coupling product no. 61262500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S SKU: 61262501](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-25-nr-61262500-consisting-of-6-springs-strength-s-sku-61262501/): Material: Special spring-steel. Fitting to coupling product no. 61262500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Safety clutch CM Gr. 25 SKU: 61262500](https://maedler.in/product/safety-clutch-cm-gr-25-sku-61262500/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Disc spring set LL for safety clutch CM size 20 Nr.61262000 consisting of 4 springs strength L SKU: 61262004](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-20-nr-61262000-consisting-of-4-springs-strength-l-sku-61262004/): Material: Special spring-steel. Fitting to coupling product no. 61262000. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. The set product-no. 61262002 is for both torque ranges M and L. - [Disc spring set M / L for safety clutch CM Gr. 20 Nr.61262000 consisting of 5 springs strength M SKU: 61262002](https://maedler.in/product/disc-spring-set-m-l-for-safety-clutch-cm-gr-20-nr-61262000-consisting-of-5-springs-strength-m-sku-61262002/): Material: Special spring-steel. Fitting to coupling product no. 61262000. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. The set product-no. 61262002 is for both torque ranges M and L. - [Disc spring set S for safety clutch CM size 20 Nr.61262000 consisting of 6 springs strength S SKU: 61262001](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-20-nr-61262000-consisting-of-6-springs-strength-s-sku-61262001/): Material: Special spring-steel. Fitting to coupling product no. 61262000. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. The set product-no. 61262002 is for both torque ranges M and L. - [Safety clutch CM Gr. 20 SKU: 61262000](https://maedler.in/product/safety-clutch-cm-gr-20-sku-61262000/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Friction lining for sliding hub ROBA 612420 SKU: 61242100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612420-sku-61242100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 240-1200 Nm outer diameter 200mm max. bore: 80mm SKU: 61242000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-240-1200-nm-outer-diameter-200mm-max-bore-80mm-sku-61242000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612400 SKU: 61240100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612400-sku-61240100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 140-700 Nm outer diameter 170mm max. bore: 65mm SKU: 61240000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-140-700-nm-outer-diameter-170mm-max-bore-65mm-sku-61240000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612380 SKU: 61238100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612380-sku-61238100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 110-550 Nm outer diameter 140mm max. bore: 55mm SKU: 61238000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-110-550-nm-outer-diameter-140mm-max-bore-55mm-sku-61238000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612360 SKU: 61236100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612360-sku-61236100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 50-250 Nm outer diameter 115mm max. bore: 45mm SKU: 61236000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-50-250-nm-outer-diameter-115mm-max-bore-45mm-sku-61236000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612340 SKU: 61234100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612340-sku-61234100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 26-130 Nm outer diameter 88mm max. bore: 35mm SKU: 61234000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-26-130-nm-outer-diameter-88mm-max-bore-35mm-sku-61234000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612320 SKU: 61232100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612320-sku-61232100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 14-70 Nm outer diameter 68mm max. bore: 25mm SKU: 61232000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-14-70-nm-outer-diameter-68mm-max-bore-25mm-sku-61232000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 61231000 SKU: 61231100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-61231000-sku-61231100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 6-30 Nm outer diameter 58mm max. bore: 22mm SKU: 61231000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-6-30-nm-outer-diameter-58mm-max-bore-22mm-sku-61231000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612300 SKU: 61230100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612300-sku-61230100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 2-10 Nm outer diameter 45mm max. bore: 20mm SKU: 61230000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-2-10-nm-outer-diameter-45mm-max-bore-20mm-sku-61230000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Sliding hub with elastic coupling type RNR, size 2 SKU: 61220300](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-2-sku-61220300/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Sliding hub with elastic coupling type RNR, size 1 SKU: 61220200](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-1-sku-61220200/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Sliding hub with elastic coupling type RNR, size 01 SKU: 61220100](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-01-sku-61220100/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Sliding hub with elastic coupling type RNR, size 0 SKU: 61220000](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-0-sku-61220000/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Sliding hub with elastic coupling type RNR, size 00 SKU: 61219900](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-00-sku-61219900/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Friction disc for sliding hub FA size 8 170x285x5mm SKU: 61210801](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-8-170x285x5mm-sku-61210801/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 8 torque adjustable 900-3400 Nm outer diameter 285 mm max. bore: 120mm SKU: 61210800](https://maedler.in/product/sliding-hub-fa-size-8-torque-adjustable-900-3400-nm-outer-diameter-285-mm-max-bore-120mm-sku-61210800/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 7 144x240x5mm SKU: 61210701](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-7-144x240x5mm-sku-61210701/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 7 torque adjustable 600-2200 Nm outer diameter 240 mm max. bore: 100mm SKU: 61210700](https://maedler.in/product/sliding-hub-fa-size-7-torque-adjustable-600-2200-nm-outer-diameter-240-mm-max-bore-100mm-sku-61210700/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 6 116x200x5mm SKU: 61210601](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-6-116x200x5mm-sku-61210601/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 6 torque adjustable 300-1200 Nm outer diameter 200 mm max. bore: 80mm SKU: 61210600](https://maedler.in/product/sliding-hub-fa-size-6-torque-adjustable-300-1200-nm-outer-diameter-200-mm-max-bore-80mm-sku-61210600/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 5 98x170x5mm SKU: 61210501](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-5-98x170x5mm-sku-61210501/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 5 torque adjustable 280-800 Nm outer diameter 170 mm max. bore: 65mm SKU: 61210500](https://maedler.in/product/sliding-hub-fa-size-5-torque-adjustable-280-800-nm-outer-diameter-170-mm-max-bore-65mm-sku-61210500/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 4 85x140x4mm SKU: 61210401](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-4-85x140x4mm-sku-61210401/): Delievery per piece. For each hub there are 2 pieces required. - [Rod end BR DIN ISO 12240-4 series K internal thread M20x1.5 right with spherical ball bearing SKU: 63242000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m20x1-5-right-with-spherical-ball-bearing-sku-63242000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M18x1.5 right with spherical ball bearing SKU: 63241800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m18x1-5-right-with-spherical-ball-bearing-sku-63241800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M16 right with spherical ball bearing SKU: 63241600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m16-right-with-spherical-ball-bearing-sku-63241600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M14 right with spherical ball bearing SKU: 63241400](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m14-right-with-spherical-ball-bearing-sku-63241400/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M12 right with spherical ball bearing SKU: 63241200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m12-right-with-spherical-ball-bearing-sku-63241200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M10 right with spherical ball bearing SKU: 63241000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m10-right-with-spherical-ball-bearing-sku-63241000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M8 right with spherical ball bearing SKU: 63240800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m8-right-with-spherical-ball-bearing-sku-63240800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M6 right with spherical ball bearing SKU: 63240600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m6-right-with-spherical-ball-bearing-sku-63240600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end GS DIN ISO 12240-4 series K external thread M42x2 left == Initial lubrication required before use == SKU: 63234000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m42x2-left-initial-lubrication-required-before-use-sku-63234000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M36x2 left == Initial lubrication required before use == SKU: 63233500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m36x2-left-initial-lubrication-required-before-use-sku-63233500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M30x2 left == Initial lubrication required before use == SKU: 63233000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m30x2-left-initial-lubrication-required-before-use-sku-63233000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M24x2 left == Initial lubrication required before use == SKU: 63232500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m24x2-left-initial-lubrication-required-before-use-sku-63232500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M22x1.5 left == Initial lubrication required before use == SKU: 63232200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m22x1-5-left-initial-lubrication-required-before-use-sku-63232200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M20x1.5 left == Initial lubrication required before use == SKU: 63232000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m20x1-5-left-initial-lubrication-required-before-use-sku-63232000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 left == Initial lubrication required before use == SKU: 63231800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m18x1-5-left-initial-lubrication-required-before-use-sku-63231800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M16 left == Initial lubrication required before use == SKU: 63231600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m16-left-initial-lubrication-required-before-use-sku-63231600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M14 left == Initial lubrication required before use == SKU: 63231400](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m14-left-initial-lubrication-required-before-use-sku-63231400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M12 left == Initial lubrication required before use == SKU: 63231200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m12-left-initial-lubrication-required-before-use-sku-63231200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M10 left == Initial lubrication required before use == SKU: 63231000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m10-left-initial-lubrication-required-before-use-sku-63231000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M8 left == Initial lubrication required before use == SKU: 63230800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m8-left-initial-lubrication-required-before-use-sku-63230800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M6 left == Initial lubrication required before use == SKU: 63230600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m6-left-initial-lubrication-required-before-use-sku-63230600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M5 left == Initial lubrication required before use == SKU: 63230500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m5-left-initial-lubrication-required-before-use-sku-63230500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M3 left == Initial lubrication required before use == SKU: 63230300](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m3-left-initial-lubrication-required-before-use-sku-63230300/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M2 left == Initial lubrication required before use == SKU: 63230200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m2-left-initial-lubrication-required-before-use-sku-63230200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M42x2 right == Initial lubrication required before use == SKU: 63224000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m42x2-right-initial-lubrication-required-before-use-sku-63224000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M36x2 right == Initial lubrication required before use == SKU: 63223500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m36x2-right-initial-lubrication-required-before-use-sku-63223500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M30x2 right == Initial lubrication required before use == SKU: 63223000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m30x2-right-initial-lubrication-required-before-use-sku-63223000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M24x2 right == Initial lubrication required before use == SKU: 63222500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m24x2-right-initial-lubrication-required-before-use-sku-63222500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M22x1.5 right == Initial lubrication required before use == SKU: 63222200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m22x1-5-right-initial-lubrication-required-before-use-sku-63222200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M20x1.5 right == Initial lubrication required before use == SKU: 63222000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m20x1-5-right-initial-lubrication-required-before-use-sku-63222000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 right == Initial lubrication required before use == SKU: 63221800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m18x1-5-right-initial-lubrication-required-before-use-sku-63221800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M16 right == Initial lubrication required before use == SKU: 63221600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m16-right-initial-lubrication-required-before-use-sku-63221600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M14 right == Initial lubrication required before use == SKU: 63221400](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m14-right-initial-lubrication-required-before-use-sku-63221400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M12 right == Initial lubrication required before use == SKU: 63221200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m12-right-initial-lubrication-required-before-use-sku-63221200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M10 right == Initial lubrication required before use == SKU: 63221000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m10-right-initial-lubrication-required-before-use-sku-63221000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M8 right == Initial lubrication required before use == SKU: 63220800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m8-right-initial-lubrication-required-before-use-sku-63220800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M6 right == Initial lubrication required before use == SKU: 63220600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m6-right-initial-lubrication-required-before-use-sku-63220600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M5 right == Initial lubrication required before use == SKU: 63220500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m5-right-initial-lubrication-required-before-use-sku-63220500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M3 right == Initial lubrication required before use == SKU: 63220300](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m3-right-initial-lubrication-required-before-use-sku-63220300/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M2 right == Initial lubrication required before use == SKU: 63220200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m2-right-initial-lubrication-required-before-use-sku-63220200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M42x2 left == Initial lubrication required before use == SKU: 63214000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m42x2-left-initial-lubrication-required-before-use-sku-63214000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M36x2 left == Initial lubrication required before use == SKU: 63213500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m36x2-left-initial-lubrication-required-before-use-sku-63213500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M30x2 left == Initial lubrication required before use == SKU: 63213000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m30x2-left-initial-lubrication-required-before-use-sku-63213000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M24x2 left == Initial lubrication required before use == SKU: 63212500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m24x2-left-initial-lubrication-required-before-use-sku-63212500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M20x1.5 left == Initial lubrication required before use == SKU: 63212000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m20x1-5-left-initial-lubrication-required-before-use-sku-63212000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M18x1.5 left == Initial lubrication required before use == SKU: 63211800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m18x1-5-left-initial-lubrication-required-before-use-sku-63211800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M16 left == Initial lubrication required before use == SKU: 63211600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m16-left-initial-lubrication-required-before-use-sku-63211600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M14 left == Initial lubrication required before use == SKU: 63211400](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m14-left-initial-lubrication-required-before-use-sku-63211400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M12 left == Initial lubrication required before use == SKU: 63211200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m12-left-initial-lubrication-required-before-use-sku-63211200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M10 left == Initial lubrication required before use == SKU: 63211000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m10-left-initial-lubrication-required-before-use-sku-63211000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M8 left == Initial lubrication required before use == SKU: 63210800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m8-left-initial-lubrication-required-before-use-sku-63210800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M6 left == Initial lubrication required before use == SKU: 63210600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m6-left-initial-lubrication-required-before-use-sku-63210600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M5 left == Initial lubrication required before use == SKU: 63210500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m5-left-initial-lubrication-required-before-use-sku-63210500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M3 left == Initial lubrication required before use == SKU: 63210300](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m3-left-initial-lubrication-required-before-use-sku-63210300/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M2 left == Initial lubrication required before use == SKU: 63210200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m2-left-initial-lubrication-required-before-use-sku-63210200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M42x2 right == Initial lubrication required before use == SKU: 63204000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m42x2-right-initial-lubrication-required-before-use-sku-63204000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M36x2 right == Initial lubrication required before use == SKU: 63203500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m36x2-right-initial-lubrication-required-before-use-sku-63203500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M30x2 right == Initial lubrication required before use == SKU: 63203000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m30x2-right-initial-lubrication-required-before-use-sku-63203000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M24x2 right == Initial lubrication required before use == SKU: 63202500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m24x2-right-initial-lubrication-required-before-use-sku-63202500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M22x1.5 right == Initial lubrication required before use == SKU: 63202200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m22x1-5-right-initial-lubrication-required-before-use-sku-63202200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M20x1.5 right == Initial lubrication required before use == SKU: 63202000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m20x1-5-right-initial-lubrication-required-before-use-sku-63202000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M18x1.5 right == Initial lubrication required before use == SKU: 63201800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m18x1-5-right-initial-lubrication-required-before-use-sku-63201800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M16 right == Initial lubrication required before use == SKU: 63201600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m16-right-initial-lubrication-required-before-use-sku-63201600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M14 right == Initial lubrication required before use == SKU: 63201400](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m14-right-initial-lubrication-required-before-use-sku-63201400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M12 right == Initial lubrication required before use == SKU: 63201200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m12-right-initial-lubrication-required-before-use-sku-63201200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M10 right == Initial lubrication required before use == SKU: 63201000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m10-right-initial-lubrication-required-before-use-sku-63201000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M8 right == Initial lubrication required before use == SKU: 63200800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m8-right-initial-lubrication-required-before-use-sku-63200800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == SKU: 63200600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m6-right-initial-lubrication-required-before-use-sku-63200600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M5 right == Initial lubrication required before use == SKU: 63200500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m5-right-initial-lubrication-required-before-use-sku-63200500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M3 right == Initial lubrication required before use == SKU: 63200300](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m3-right-initial-lubrication-required-before-use-sku-63200300/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M2 right == Initial lubrication required before use == SKU: 63200200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m2-right-initial-lubrication-required-before-use-sku-63200200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Slip shaft with joints PWR bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 380mm max. length 430mm stainless steel 1.4301 SKU: 63199850N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-380mm-max-length-430mm-stainless-steel-1-4301-sku-63199850n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 355mm max. length 405mm stainless steel 1.4301 SKU: 63199847N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-355mm-max-length-405mm-stainless-steel-1-4301-sku-63199847n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 315mm max. length 365mm stainless steel 1.4301 SKU: 63199840N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-315mm-max-length-365mm-stainless-steel-1-4301-sku-63199840n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 305mm max. length 355mm stainless steel 1.4301 SKU: 63199837N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-305mm-max-length-355mm-stainless-steel-1-4301-sku-63199837n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 240mm max. length 270mm stainless steel 1.4301 SKU: 63199826N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-240mm-max-length-270mm-stainless-steel-1-4301-sku-63199826n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199757N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199757n/): Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199747N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199747n/): Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199732N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199732n/): Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199726N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199726n/): Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199257N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199257n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199250N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199250n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199247N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199247n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199240N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199240n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199229N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199229n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199226N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199226n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199216N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199216n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 400mm max. length 490mm steel SKU: 63196300N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-400mm-max-length-490mm-steel-sku-63196300n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 350mm max. length 435mm steel SKU: 63195000N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-350mm-max-length-435mm-steel-sku-63195000n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 330mm max. length 430mm steel SKU: 63194700N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-330mm-max-length-430mm-steel-sku-63194700n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 250mm max. length 320mm steel SKU: 63193200N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-250mm-max-length-320mm-steel-sku-63193200n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 220mm max. length 270mm steel SKU: 63192500N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-220mm-max-length-270mm-steel-sku-63192500n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 170mm max. length 200mm steel SKU: 63192000N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-170mm-max-length-200mm-steel-sku-63192000n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 330mm max. length 430mm steel SKU: 63184700N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-330mm-max-length-430mm-steel-sku-63184700n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 210mm max. length 280mm steel SKU: 63182900N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-210mm-max-length-280mm-steel-sku-63182900n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 170mm max. length 230mm steel SKU: 63182000N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-170mm-max-length-230mm-steel-sku-63182000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63173700N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63173700n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63172600N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63172600n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63172000N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63172000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 40H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63168000N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-40h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63168000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Rod end BR-R DIN 12240-4 series K internal tread M12 right with spherical ball bearing stainless SKU: 63299412](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m12-right-with-spherical-ball-bearing-stainless-sku-63299412/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M10 right with spherical ball bearing stainless SKU: 63299410](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m10-right-with-spherical-ball-bearing-stainless-sku-63299410/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M8 right with spherical ball bearing stainless SKU: 63299408](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m8-right-with-spherical-ball-bearing-stainless-sku-63299408/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M6 right with spherical ball bearing stainless SKU: 63299406](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m6-right-with-spherical-ball-bearing-stainless-sku-63299406/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end GT DIN ISO 12240-4 series K external thread M42x2 left maintenance-free SKU: 63294000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m42x2-left-maintenance-free-sku-63294000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M36x2 left maintenance-free SKU: 63293500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m36x2-left-maintenance-free-sku-63293500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M30x2 left maintenance-free SKU: 63293000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m30x2-left-maintenance-free-sku-63293000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M24x2 left maintenance-free SKU: 63292500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m24x2-left-maintenance-free-sku-63292500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M22x1.5 left maintenance-free SKU: 63292200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m22x1-5-left-maintenance-free-sku-63292200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M20x1.5 left maintenance-free SKU: 63292000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m20x1-5-left-maintenance-free-sku-63292000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M18x1.5 left maintenance-free SKU: 63291800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m18x1-5-left-maintenance-free-sku-63291800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M16 left maintenance-free SKU: 63291600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m16-left-maintenance-free-sku-63291600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M14 left maintenance-free SKU: 63291400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m14-left-maintenance-free-sku-63291400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M12 left maintenance-free SKU: 63291200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m12-left-maintenance-free-sku-63291200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M10 left maintenance-free SKU: 63291000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m10-left-maintenance-free-sku-63291000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M8 left maintenance-free SKU: 63290800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m8-left-maintenance-free-sku-63290800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M6 left maintenance-free SKU: 63290600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m6-left-maintenance-free-sku-63290600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M5 left maintenance-free SKU: 63290500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m5-left-maintenance-free-sku-63290500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M4 left maintenance-free SKU: 63290400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m4-left-maintenance-free-sku-63290400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M42x2 right maintenance-free SKU: 63284000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m42x2-right-maintenance-free-sku-63284000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M36x2 right maintenance-free SKU: 63283500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m36x2-right-maintenance-free-sku-63283500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M30x2 right maintenance-free SKU: 63283000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m30x2-right-maintenance-free-sku-63283000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M24x2 right maintenance-free SKU: 63282500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m24x2-right-maintenance-free-sku-63282500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M22x1.5 right maintenance-free SKU: 63282200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m22x1-5-right-maintenance-free-sku-63282200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M20x1.5 right maintenance-free SKU: 63282000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m20x1-5-right-maintenance-free-sku-63282000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M18x1.5 right maintenance-free SKU: 63281800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m18x1-5-right-maintenance-free-sku-63281800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M16 right maintenance-free SKU: 63281600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m16-right-maintenance-free-sku-63281600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M14 right maintenance-free SKU: 63281400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m14-right-maintenance-free-sku-63281400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M12 right maintenance-free SKU: 63281200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m12-right-maintenance-free-sku-63281200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M10 right maintenance-free SKU: 63281000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m10-right-maintenance-free-sku-63281000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M8 right maintenance-free SKU: 63280800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m8-right-maintenance-free-sku-63280800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M6 right maintenance-free SKU: 63280600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m6-right-maintenance-free-sku-63280600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M5 right maintenance-free SKU: 63280500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m5-right-maintenance-free-sku-63280500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M4 right maintenance-free SKU: 63280400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m4-right-maintenance-free-sku-63280400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M42x2 left maintenance-free SKU: 63274000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m42x2-left-maintenance-free-sku-63274000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M36x2 left maintenance-free SKU: 63273500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m36x2-left-maintenance-free-sku-63273500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M30x2 left maintenance-free SKU: 63273000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m30x2-left-maintenance-free-sku-63273000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free SKU: 63272500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m24x2-left-maintenance-free-sku-63272500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M22x1.5 left maintenance-free SKU: 63272200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m22x1-5-left-maintenance-free-sku-63272200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M20x1.5 left maintenance-free SKU: 63272000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m20x1-5-left-maintenance-free-sku-63272000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M18x1.5 left maintenance-free SKU: 63271800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m18x1-5-left-maintenance-free-sku-63271800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M16 left maintenance-free SKU: 63271600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m16-left-maintenance-free-sku-63271600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M14 left maintenance-free SKU: 63271400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m14-left-maintenance-free-sku-63271400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M12 left maintenance-free SKU: 63271200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m12-left-maintenance-free-sku-63271200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M10 left maintenance-free SKU: 63271000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m10-left-maintenance-free-sku-63271000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M8 left maintenance-free SKU: 63270800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m8-left-maintenance-free-sku-63270800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M6 left maintenance-free SKU: 63270600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m6-left-maintenance-free-sku-63270600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M5 left maintenance-free SKU: 63270500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m5-left-maintenance-free-sku-63270500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M4 left maintenance-free SKU: 63270400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m4-left-maintenance-free-sku-63270400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M42x2 right maintenance-free SKU: 63264000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m42x2-right-maintenance-free-sku-63264000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M36x2 right maintenance-free SKU: 63263500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m36x2-right-maintenance-free-sku-63263500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M30x2 right maintenance-free SKU: 63263000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m30x2-right-maintenance-free-sku-63263000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free SKU: 63262500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m24x2-right-maintenance-free-sku-63262500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M22x1.5 right maintenance-free SKU: 63262200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m22x1-5-right-maintenance-free-sku-63262200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M20x1.5 right maintenance-free SKU: 63262000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m20x1-5-right-maintenance-free-sku-63262000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M18x1.5 right maintenance-free SKU: 63261800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m18x1-5-right-maintenance-free-sku-63261800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M16 right maintenance-free SKU: 63261600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m16-right-maintenance-free-sku-63261600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M14 right maintenance-free SKU: 63261400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m14-right-maintenance-free-sku-63261400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M12 right maintenance-free SKU: 63261200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m12-right-maintenance-free-sku-63261200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M10 right maintenance-free SKU: 63261000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m10-right-maintenance-free-sku-63261000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M8 right maintenance-free SKU: 63260800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m8-right-maintenance-free-sku-63260800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M6 right maintenance-free SKU: 63260600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m6-right-maintenance-free-sku-63260600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M5 right maintenance-free SKU: 63260500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m5-right-maintenance-free-sku-63260500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M4 right maintenance-free SKU: 63260400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m4-right-maintenance-free-sku-63260400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end BR DIN ISO 12240-4 series K external tread M30x2 left with spherical ball bearing SKU: 63258000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m30x2-left-with-spherical-ball-bearing-sku-63258000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M24x2 left with spherical ball bearing SKU: 63257500](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m24x2-left-with-spherical-ball-bearing-sku-63257500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M22x1.5 left with spherical ball bearing SKU: 63257200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m22x1-5-left-with-spherical-ball-bearing-sku-63257200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M20x1.5 left with spherical ball bearing SKU: 63257000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m20x1-5-left-with-spherical-ball-bearing-sku-63257000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M18x1.5 left with spherical ball bearing SKU: 63256800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m18x1-5-left-with-spherical-ball-bearing-sku-63256800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M16 left with spherical ball bearing SKU: 63256600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m16-left-with-spherical-ball-bearing-sku-63256600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M14 left with spherical ball bearing SKU: 63256400](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m14-left-with-spherical-ball-bearing-sku-63256400/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M12 left with spherical ball bearing SKU: 63256200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m12-left-with-spherical-ball-bearing-sku-63256200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M10 left with spherical ball bearing SKU: 63256000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m10-left-with-spherical-ball-bearing-sku-63256000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M8 left with spherical ball bearing SKU: 63255800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m8-left-with-spherical-ball-bearing-sku-63255800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M6 left with spherical ball bearing SKU: 63255600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m6-left-with-spherical-ball-bearing-sku-63255600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M30x2 right with spherical ball bearing SKU: 63253000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m30x2-right-with-spherical-ball-bearing-sku-63253000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M24x2 right with spherical ball bearing SKU: 63252500](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m24x2-right-with-spherical-ball-bearing-sku-63252500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M22x1.5 right with spherical ball bearing SKU: 63252200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m22x1-5-right-with-spherical-ball-bearing-sku-63252200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M20x1.5 right with spherical ball bearing SKU: 63252000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m20x1-5-right-with-spherical-ball-bearing-sku-63252000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M18x1.5 right with spherical ball bearing SKU: 63251800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m18x1-5-right-with-spherical-ball-bearing-sku-63251800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M16 right with spherical ball bearing SKU: 63251600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m16-right-with-spherical-ball-bearing-sku-63251600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M14 right with spherical ball bearing SKU: 63251400](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m14-right-with-spherical-ball-bearing-sku-63251400/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M12 right with spherical ball bearing SKU: 63251200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m12-right-with-spherical-ball-bearing-sku-63251200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M10 right with spherical ball bearing SKU: 63251000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m10-right-with-spherical-ball-bearing-sku-63251000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M8 right with spherical ball bearing SKU: 63250800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m8-right-with-spherical-ball-bearing-sku-63250800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M6 right with spherical ball bearing SKU: 63250600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m6-right-with-spherical-ball-bearing-sku-63250600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M30x2 left with spherical ball bearing SKU: 63248000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m30x2-left-with-spherical-ball-bearing-sku-63248000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M24x2 left with spherical ball bearing SKU: 63247500](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m24x2-left-with-spherical-ball-bearing-sku-63247500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M22x1.5 left with spherical ball bearing SKU: 63247200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m22x1-5-left-with-spherical-ball-bearing-sku-63247200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M20x1.5 left with spherical ball bearing SKU: 63247000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m20x1-5-left-with-spherical-ball-bearing-sku-63247000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M18x1.5 left with spherical ball bearing SKU: 63246800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m18x1-5-left-with-spherical-ball-bearing-sku-63246800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M16 left with spherical ball bearing SKU: 63246600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m16-left-with-spherical-ball-bearing-sku-63246600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M14 left with spherical ball bearing SKU: 63246400](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m14-left-with-spherical-ball-bearing-sku-63246400/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M12 left with spherical ball bearing SKU: 63246200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m12-left-with-spherical-ball-bearing-sku-63246200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M10 left with spherical ball bearing SKU: 63246000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m10-left-with-spherical-ball-bearing-sku-63246000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M8 left with spherical ball bearing SKU: 63245800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m8-left-with-spherical-ball-bearing-sku-63245800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M6 left with spherical ball bearing SKU: 63245600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m6-left-with-spherical-ball-bearing-sku-63245600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M30x2 right with spherical ball bearing SKU: 63243000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m30x2-right-with-spherical-ball-bearing-sku-63243000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M24x2 right with spherical ball bearing SKU: 63242500](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m24x2-right-with-spherical-ball-bearing-sku-63242500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M22x1.5 right with spherical ball bearing SKU: 63242200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m22x1-5-right-with-spherical-ball-bearing-sku-63242200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end GEW DIN 12240-4 series E internal thread M24x2 left maintenance-free SKU: 63432500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m24x2-left-maintenance-free-sku-63432500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M20x1.5 left maintenance-free SKU: 63432000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m20x1-5-left-maintenance-free-sku-63432000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M16 left maintenance-free SKU: 63431700](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m16-left-maintenance-free-sku-63431700/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M16 left maintenance-free SKU: 63431600](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m16-left-maintenance-free-sku-63431600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M14 left maintenance-free SKU: 63431500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m14-left-maintenance-free-sku-63431500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M12 left maintenance-free SKU: 63431200](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m12-left-maintenance-free-sku-63431200/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M10 left maintenance-free SKU: 63431000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m10-left-maintenance-free-sku-63431000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M8 left maintenance-free SKU: 63430800](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m8-left-maintenance-free-sku-63430800/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M6 left maintenance-free SKU: 63430600](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m6-left-maintenance-free-sku-63430600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M64x4 right maintenance-free SKU: 63418000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m64x4-right-maintenance-free-sku-63418000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M56x4 right maintenance-free SKU: 63417000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m56x4-right-maintenance-free-sku-63417000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M52x3 right maintenance-free SKU: 63416000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m52x3-right-maintenance-free-sku-63416000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M45x3 right maintenance-free SKU: 63415000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m45x3-right-maintenance-free-sku-63415000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M42x3 right maintenance-free SKU: 63414500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m42x3-right-maintenance-free-sku-63414500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M39x3 right maintenance-free SKU: 63414000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m39x3-right-maintenance-free-sku-63414000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M36x3 right maintenance-free SKU: 63413500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m36x3-right-maintenance-free-sku-63413500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M30x2 right maintenance-free SKU: 63413000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m30x2-right-maintenance-free-sku-63413000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M24x2 right maintenance-free SKU: 63412500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m24x2-right-maintenance-free-sku-63412500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M20x1.5 right maintenance-free SKU: 63412000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m20x1-5-right-maintenance-free-sku-63412000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M16 right maintenance-free SKU: 63411700](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m16-right-maintenance-free-sku-63411700/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M16 right maintenance-free SKU: 63411600](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m16-right-maintenance-free-sku-63411600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M14 right maintenance-free SKU: 63411500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m14-right-maintenance-free-sku-63411500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M12 right maintenance-free SKU: 63411200](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m12-right-maintenance-free-sku-63411200/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M10 right maintenance-free SKU: 63411000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m10-right-maintenance-free-sku-63411000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M8 right maintenance-free SKU: 63410800](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m8-right-maintenance-free-sku-63410800/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M6 right maintenance-free SKU: 63410600](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m6-right-maintenance-free-sku-63410600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GT-R DIN ISO 12240-4 series K external thread M42x2 left maintenance-free stainless steel SKU: 63299940](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m42x2-left-maintenance-free-stainless-steel-sku-63299940/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M36x2 left maintenance-free stainless steel SKU: 63299935](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m36x2-left-maintenance-free-stainless-steel-sku-63299935/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M30x2 left maintenance-free stainless steel SKU: 63299930](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m30x2-left-maintenance-free-stainless-steel-sku-63299930/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M24x2 left maintenance-free stainless steel SKU: 63299925](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m24x2-left-maintenance-free-stainless-steel-sku-63299925/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M22x1.5 left maintenance-free stainless steel SKU: 63299922](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m22x1-5-left-maintenance-free-stainless-steel-sku-63299922/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M20x1.5 left maintenance-free stainless steel SKU: 63299920](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m20x1-5-left-maintenance-free-stainless-steel-sku-63299920/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M18x1,5 left maintenance-free stainless steel SKU: 63299918](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m18x15-left-maintenance-free-stainless-steel-sku-63299918/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M16 left maintenance-free stainless steel SKU: 63299916](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m16-left-maintenance-free-stainless-steel-sku-63299916/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M14 left maintenance-free stainless steel SKU: 63299914](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m14-left-maintenance-free-stainless-steel-sku-63299914/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M12 left maintenance-free stainless steel SKU: 63299912](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m12-left-maintenance-free-stainless-steel-sku-63299912/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M10 left maintenance-free stainless steel SKU: 63299910](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m10-left-maintenance-free-stainless-steel-sku-63299910/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M8 left maintenance-free stainless steel SKU: 63299908](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m8-left-maintenance-free-stainless-steel-sku-63299908/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M6 left maintenance-free stainless steel SKU: 63299906](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m6-left-maintenance-free-stainless-steel-sku-63299906/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M5 left maintenance-free stainless steel SKU: 63299905](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m5-left-maintenance-free-stainless-steel-sku-63299905/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M42x2 right maintenance-free stainless steel SKU: 63299840](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m42x2-right-maintenance-free-stainless-steel-sku-63299840/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M36x2 right maintenance-free stainless steel SKU: 63299835](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m36x2-right-maintenance-free-stainless-steel-sku-63299835/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M30x2 right maintenance-free stainless steel SKU: 63299830](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m30x2-right-maintenance-free-stainless-steel-sku-63299830/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M24x2 right maintenance-free stainless steel SKU: 63299825](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m24x2-right-maintenance-free-stainless-steel-sku-63299825/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M22x1,5 right maintenance-free stainless steel SKU: 63299822](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m22x15-right-maintenance-free-stainless-steel-sku-63299822/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M20x1.5 right maintenance-free stainless steel SKU: 63299820](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m20x1-5-right-maintenance-free-stainless-steel-sku-63299820/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M18x1,5 right maintenance-free stainless steel SKU: 63299818](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m18x15-right-maintenance-free-stainless-steel-sku-63299818/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M16 right maintenance-free stainless steel SKU: 63299816](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m16-right-maintenance-free-stainless-steel-sku-63299816/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M14 right maintenance-free stainless steel SKU: 63299814](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m14-right-maintenance-free-stainless-steel-sku-63299814/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M12 right maintenance-free stainless steel SKU: 63299812](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m12-right-maintenance-free-stainless-steel-sku-63299812/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M10 right maintenance-free stainless steel SKU: 63299810](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m10-right-maintenance-free-stainless-steel-sku-63299810/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M8 right maintenance-free stainless steel SKU: 63299808](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m8-right-maintenance-free-stainless-steel-sku-63299808/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M6 right maintenance-free stainless steel SKU: 63299806](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m6-right-maintenance-free-stainless-steel-sku-63299806/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M5 right maintenance-free stainless steel SKU: 63299805](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m5-right-maintenance-free-stainless-steel-sku-63299805/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M42x2 left maintenance-free stainless steel SKU: 63299740](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m42x2-left-maintenance-free-stainless-steel-sku-63299740/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M36x2 left maintenance-free stainless steel SKU: 63299735](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m36x2-left-maintenance-free-stainless-steel-sku-63299735/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M30x2 left maintenance-free stainless steel SKU: 63299730](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m30x2-left-maintenance-free-stainless-steel-sku-63299730/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free stainless steel SKU: 63299725](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m24x2-left-maintenance-free-stainless-steel-sku-63299725/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M22x1,5 left maintenance-free stainless steel SKU: 63299722](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m22x15-left-maintenance-free-stainless-steel-sku-63299722/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M20x1.5 left maintenance-free stainless steel SKU: 63299720](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m20x1-5-left-maintenance-free-stainless-steel-sku-63299720/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M18x1,5 left maintenance-free stainless steel SKU: 63299718](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m18x15-left-maintenance-free-stainless-steel-sku-63299718/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M16 left maintenance-free stainless steel SKU: 63299716](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m16-left-maintenance-free-stainless-steel-sku-63299716/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M14 left maintenance-free stainless steel SKU: 63299714](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m14-left-maintenance-free-stainless-steel-sku-63299714/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M12 left maintenance-free stainless steel SKU: 63299712](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m12-left-maintenance-free-stainless-steel-sku-63299712/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M10 left maintenance-free stainless steel SKU: 63299710](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m10-left-maintenance-free-stainless-steel-sku-63299710/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M8 left maintenance-free stainless steel SKU: 63299708](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m8-left-maintenance-free-stainless-steel-sku-63299708/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M6 left maintenance-free stainless steel SKU: 63299706](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m6-left-maintenance-free-stainless-steel-sku-63299706/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M5 left maintenance-free stainless steel SKU: 63299705](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m5-left-maintenance-free-stainless-steel-sku-63299705/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M42x2 right maintenance-free stainless steel SKU: 63299640](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m42x2-right-maintenance-free-stainless-steel-sku-63299640/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M36x2 right maintenance-free stainless steel SKU: 63299635](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m36x2-right-maintenance-free-stainless-steel-sku-63299635/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M30x2 right maintenance-free stainless steel SKU: 63299630](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m30x2-right-maintenance-free-stainless-steel-sku-63299630/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free stainless steel SKU: 63299625](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m24x2-right-maintenance-free-stainless-steel-sku-63299625/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M22x1,5 right maintenance-free stainless steel SKU: 63299622](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m22x15-right-maintenance-free-stainless-steel-sku-63299622/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M20x1.5 right maintenance-free stainless steel SKU: 63299620](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m20x1-5-right-maintenance-free-stainless-steel-sku-63299620/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M18x1,5 right maintenance-free stainless steel SKU: 63299618](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m18x15-right-maintenance-free-stainless-steel-sku-63299618/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M16 right maintenance-free stainless steel SKU: 63299616](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m16-right-maintenance-free-stainless-steel-sku-63299616/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M14 right maintenance-free stainless steel SKU: 63299614](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m14-right-maintenance-free-stainless-steel-sku-63299614/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M12 right maintenance-free stainless steel SKU: 63299612](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m12-right-maintenance-free-stainless-steel-sku-63299612/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M10 right maintenance-free stainless steel SKU: 63299610](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m10-right-maintenance-free-stainless-steel-sku-63299610/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M8 right maintenance-free stainless steel SKU: 63299608](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m8-right-maintenance-free-stainless-steel-sku-63299608/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M6 right maintenance-free stainless steel SKU: 63299606](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m6-right-maintenance-free-stainless-steel-sku-63299606/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M5 right maintenance-free stainless steel SKU: 63299605](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m5-right-maintenance-free-stainless-steel-sku-63299605/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end BR-R DIN 12240-4 series K external tread M20 left with spherical ball bearing stainless SKU: 63299570](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m20-left-with-spherical-ball-bearing-stainless-sku-63299570/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M16 left with spherical ball bearing stainless SKU: 63299566](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m16-left-with-spherical-ball-bearing-stainless-sku-63299566/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M12 left with spherical ball bearing stainless SKU: 63299562](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m12-left-with-spherical-ball-bearing-stainless-sku-63299562/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M10 left with spherical ball bearing stainless SKU: 63299560](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m10-left-with-spherical-ball-bearing-stainless-sku-63299560/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M8 left with spherical ball bearing stainless SKU: 63299558](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m8-left-with-spherical-ball-bearing-stainless-sku-63299558/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M20 right with spherical ball bearing stainless SKU: 63299520](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m20-right-with-spherical-ball-bearing-stainless-sku-63299520/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M16 right with spherical ball bearing stainless SKU: 63299516](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m16-right-with-spherical-ball-bearing-stainless-sku-63299516/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M12 right with spherical ball bearing stainless SKU: 63299512](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m12-right-with-spherical-ball-bearing-stainless-sku-63299512/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M10 right with spherical ball bearing stainless SKU: 63299510](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m10-right-with-spherical-ball-bearing-stainless-sku-63299510/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M8 right with spherical ball bearing stainless SKU: 63299508](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m8-right-with-spherical-ball-bearing-stainless-sku-63299508/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M20 left with spherical ball bearing stainless SKU: 63299470](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m20-left-with-spherical-ball-bearing-stainless-sku-63299470/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M16 left with spherical ball bearing stainless SKU: 63299466](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m16-left-with-spherical-ball-bearing-stainless-sku-63299466/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M12 left with spherical ball bearing stainless SKU: 63299462](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m12-left-with-spherical-ball-bearing-stainless-sku-63299462/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M10 left with spherical ball bearing stainless SKU: 63299460](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m10-left-with-spherical-ball-bearing-stainless-sku-63299460/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M8 left with spherical ball bearing stainless SKU: 63299458](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m8-left-with-spherical-ball-bearing-stainless-sku-63299458/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M6 left with spherical ball bearing stainless SKU: 63299456](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m6-left-with-spherical-ball-bearing-stainless-sku-63299456/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M20 right with spherical ball bearing stainless SKU: 63299420](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m20-right-with-spherical-ball-bearing-stainless-sku-63299420/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M16 right with spherical ball bearing stainless SKU: 63299416](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m16-right-with-spherical-ball-bearing-stainless-sku-63299416/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 3000mm long single-start right material C15 rolled SKU: 64031600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 3000mm long single-start right material C15 rolled SKU: 64031400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 3000mm long single-start right material C15 rolled SKU: 64031200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 3000mm long single-start right material C15 rolled SKU: 64031000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 2000mm long single-start right material C15 rolled SKU: 64027000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-2000mm-long-single-start-right-material-c15-rolled-sku-64027000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 2000mm long single-start right material C15 rolled SKU: 64026000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-2000mm-long-single-start-right-material-c15-rolled-sku-64026000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 2000mm long single-start right material C15 rolled SKU: 64025200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-2000mm-long-single-start-right-material-c15-rolled-sku-64025200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN103 Tr.50 x 8 x 2000mm long, single start right material C15, rolled SKU: 64025000](https://maedler.in/product/trapezoidal-threaded-spindle-din103-tr-50-x-8-x-2000mm-long-single-start-right-material-c15-rolled-sku-64025000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 2000mm long single-start right material C15 rolled SKU: 64024800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-2000mm-long-single-start-right-material-c15-rolled-sku-64024800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 2000mm long single-start right material C15 rolled SKU: 64024400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-2000mm-long-single-start-right-material-c15-rolled-sku-64024400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 2000mm long single-start right material C15 rolled SKU: 64024000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-2000mm-long-single-start-right-material-c15-rolled-sku-64024000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 2000mm long single-start right material C15 rolled SKU: 64023600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-2000mm-long-single-start-right-material-c15-rolled-sku-64023600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 2000mm long single-start right material C15 rolled SKU: 64023200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-2000mm-long-single-start-right-material-c15-rolled-sku-64023200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 2000mm long single-start right material C15 rolled SKU: 64023000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-2000mm-long-single-start-right-material-c15-rolled-sku-64023000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 2000mm long single-start right material C15 rolled SKU: 64022800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-2000mm-long-single-start-right-material-c15-rolled-sku-64022800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 2000mm long single-start right material C15 rolled SKU: 64022400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-2000mm-long-single-start-right-material-c15-rolled-sku-64022400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 2000mm long single-start right material C15 rolled SKU: 64022000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-2000mm-long-single-start-right-material-c15-rolled-sku-64022000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 2000mm long single-start right material C15 rolled SKU: 64021800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 2000mm long single-start right material C15 rolled SKU: 64021600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 2000mm long single-start right material C15 rolled SKU: 64021400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start right material C15 rolled SKU: 64021200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 2000mm long single-start right material C15 rolled SKU: 64021000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 1500mm long single-start right material C15 rolled SKU: 64017000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-1500mm-long-single-start-right-material-c15-rolled-sku-64017000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 1500mm long single-start right material C15 rolled SKU: 64016000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-1500mm-long-single-start-right-material-c15-rolled-sku-64016000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 1500mm long single-start right material C15 rolled SKU: 64015200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-1500mm-long-single-start-right-material-c15-rolled-sku-64015200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1500mm long single-start right material C15 rolled SKU: 64015000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1500mm-long-single-start-right-material-c15-rolled-sku-64015000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 1500mm long single-start right material C15 rolled SKU: 64014800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-1500mm-long-single-start-right-material-c15-rolled-sku-64014800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 1500mm long single-start right material C15 rolled SKU: 64014400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-1500mm-long-single-start-right-material-c15-rolled-sku-64014400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1500mm long single-start right material C15 rolled SKU: 64014000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1500mm-long-single-start-right-material-c15-rolled-sku-64014000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1500mm long single-start right material C15 rolled SKU: 64013600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1500mm-long-single-start-right-material-c15-rolled-sku-64013600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 1500mm long single-start right material C15 rolled SKU: 64013200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-1500mm-long-single-start-right-material-c15-rolled-sku-64013200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1500mm long single-start right material C15 rolled SKU: 64013000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1500mm-long-single-start-right-material-c15-rolled-sku-64013000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1500mm long single-start right material C15 rolled SKU: 64012800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1500mm-long-single-start-right-material-c15-rolled-sku-64012800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1500mm long single-start right material C15 rolled SKU: 64012400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1500mm-long-single-start-right-material-c15-rolled-sku-64012400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1500mm long single-start right material C15 rolled SKU: 64012000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1500mm-long-single-start-right-material-c15-rolled-sku-64012000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1500mm long single-start right material C15 rolled SKU: 64011800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1500mm long single-start right material C15 rolled SKU: 64011600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1500mm long single-start right material C15 rolled SKU: 64011400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1500mm long single-start right material C15 rolled SKU: 64011200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1500mm long single-start right material C15 rolled SKU: 64011000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.70 x 10 x 1000mm long single-start right material C15 rolled SKU: 64007000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-1000mm-long-single-start-right-material-c15-rolled-sku-64007000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.60 x 9 x 1000mm long single-start right material C15 rolled SKU: 64006000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-1000mm-long-single-start-right-material-c15-rolled-sku-64006000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.52 x 8 x 1000mm long single-start right material C15 rolled SKU: 64005200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-1000mm-long-single-start-right-material-c15-rolled-sku-64005200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.50 x 8 x 1000mm long single-start right material C15 rolled SKU: 64005000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1000mm-long-single-start-right-material-c15-rolled-sku-64005000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.48 x 8 x 1000mm long single-start right material C15 rolled SKU: 64004800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-1000mm-long-single-start-right-material-c15-rolled-sku-64004800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.44 x 7 x 1000mm long single-start right material C15 rolled SKU: 64004400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-1000mm-long-single-start-right-material-c15-rolled-sku-64004400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.40 x 7 x 1000mm long single-start right material C15 rolled SKU: 64004000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1000mm-long-single-start-right-material-c15-rolled-sku-64004000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.36 x 6 x 1000mm long single-start right material C15 rolled SKU: 64003600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1000mm-long-single-start-right-material-c15-rolled-sku-64003600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.32 x 6 x 1000mm long single-start right material C15 rolled SKU: 64003200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-1000mm-long-single-start-right-material-c15-rolled-sku-64003200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.30 x 6 x 1000mm long single-start right material C15 rolled SKU: 64003000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1000mm-long-single-start-right-material-c15-rolled-sku-64003000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.28 x 5 x 1000mm long single-start right material C15 rolled SKU: 64002800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1000mm-long-single-start-right-material-c15-rolled-sku-64002800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.24 x 5 x 1000mm long single-start right material C15 rolled SKU: 64002400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1000mm-long-single-start-right-material-c15-rolled-sku-64002400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.20 x 4 x 1000 mm long single-start right material C15 rolled SKU: 64002000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1000-mm-long-single-start-right-material-c15-rolled-sku-64002000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.18 x 4 x1000 mm long single-start right material C15 rolled SKU: 64001800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x1000-mm-long-single-start-right-material-c15-rolled-sku-64001800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.16 x 4 x1000 mm long single-start right material C15 rolled SKU: 64001600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x1000-mm-long-single-start-right-material-c15-rolled-sku-64001600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.14 x 4 x 1000mm long single-start right material C15 rolled SKU: 64001400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1000mm-long-single-start-right-material-c15-rolled-sku-64001400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.12 x 3 x 1000mm long single-start right material C15 rolled SKU: 64001200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1000mm-long-single-start-right-material-c15-rolled-sku-64001200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.10 x 3 x 1000mm long single-start right material C15 rolled SKU: 64001000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1000mm-long-single-start-right-material-c15-rolled-sku-64001000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Rod end GAW DIN 12240-4 series E external thread M64x4 left maintenance-free SKU: 63488000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m64x4-left-maintenance-free-sku-63488000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M56x4 left maintenance-free SKU: 63487000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m56x4-left-maintenance-free-sku-63487000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M52x3 left maintenance-free SKU: 63486000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m52x3-left-maintenance-free-sku-63486000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M45x3 left maintenance-free SKU: 63485000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m45x3-left-maintenance-free-sku-63485000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M42x3 left maintenance-free SKU: 63484500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m42x3-left-maintenance-free-sku-63484500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M39x3 left maintenance-free SKU: 63484000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m39x3-left-maintenance-free-sku-63484000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M36x3 left maintenance-free SKU: 63483500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m36x3-left-maintenance-free-sku-63483500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M30x2 left maintenance-free SKU: 63483000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m30x2-left-maintenance-free-sku-63483000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M24x2 left maintenance-free SKU: 63482500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m24x2-left-maintenance-free-sku-63482500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M20x1.5 left maintenance-free SKU: 63482000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m20x1-5-left-maintenance-free-sku-63482000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M16 left maintenance-free SKU: 63481700](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m16-left-maintenance-free-sku-63481700/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M16 left maintenance-free SKU: 63481600](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m16-left-maintenance-free-sku-63481600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M14 left maintenance-free SKU: 63481500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m14-left-maintenance-free-sku-63481500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M12 left maintenance-free SKU: 63481200](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m12-left-maintenance-free-sku-63481200/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M10 left maintenance-free SKU: 63481000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m10-left-maintenance-free-sku-63481000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M8 left maintenance-free SKU: 63480800](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m8-left-maintenance-free-sku-63480800/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M6 left maintenance-free SKU: 63480600](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m6-left-maintenance-free-sku-63480600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M64x4 right maintenance-free SKU: 63468000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m64x4-right-maintenance-free-sku-63468000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M56x4 right maintenance-free SKU: 63467000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m56x4-right-maintenance-free-sku-63467000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M52x3 right maintenance-free SKU: 63466000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m52x3-right-maintenance-free-sku-63466000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M45x3 right maintenance-free SKU: 63465000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m45x3-right-maintenance-free-sku-63465000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M42x3 right maintenance-free SKU: 63464500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m42x3-right-maintenance-free-sku-63464500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M39x3 right maintenance-free SKU: 63464000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m39x3-right-maintenance-free-sku-63464000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M36x3 right maintenance-free SKU: 63463500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m36x3-right-maintenance-free-sku-63463500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M30x2 right maintenance-free SKU: 63463000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m30x2-right-maintenance-free-sku-63463000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M24x2 right maintenance-free SKU: 63462500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m24x2-right-maintenance-free-sku-63462500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M20x1.5 right maintenance-free SKU: 63462000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m20x1-5-right-maintenance-free-sku-63462000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M16 right maintenance-free SKU: 63461700](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m16-right-maintenance-free-sku-63461700/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M16 right maintenance-free SKU: 63461600](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m16-right-maintenance-free-sku-63461600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M14 right maintenance-free SKU: 63461500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m14-right-maintenance-free-sku-63461500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M12 right maintenance-free SKU: 63461200](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m12-right-maintenance-free-sku-63461200/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M10 right maintenance-free SKU: 63461000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m10-right-maintenance-free-sku-63461000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M8 right maintenance-free SKU: 63460800](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m8-right-maintenance-free-sku-63460800/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M6 right maintenance-free SKU: 63460600](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m6-right-maintenance-free-sku-63460600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GEW DIN 12240-4 series E internal thread M64x4 left maintenance-free SKU: 63438000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m64x4-left-maintenance-free-sku-63438000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M56x4 left maintenance-free SKU: 63437000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m56x4-left-maintenance-free-sku-63437000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M52x3 left maintenance-free SKU: 63436000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m52x3-left-maintenance-free-sku-63436000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M45x3 left maintenance-free SKU: 63435000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m45x3-left-maintenance-free-sku-63435000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M42x3 left maintenance-free SKU: 63434500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m42x3-left-maintenance-free-sku-63434500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M39x3 left maintenance-free SKU: 63434000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m39x3-left-maintenance-free-sku-63434000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M36x3 left maintenance-free SKU: 63433500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m36x3-left-maintenance-free-sku-63433500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M30x2 left maintenance-free SKU: 63433000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m30x2-left-maintenance-free-sku-63433000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1500mm long single-start right material 1.4305 rolled SKU: 64099112](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099112/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1500mm long single-start right material 1.4305 rolled SKU: 64099110](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099110/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1000mm long single-start right material 1.4305 machined SKU: 64099050](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1000mm-long-single-start-right-material-1-4305-machined-sku-64099050/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1000mm long single-start right material 1.4305 rolled SKU: 64099040](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099040/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1000mm long single-start right material 1.4305 rolled SKU: 64099036](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099036/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1000mm long single-start right material 1.4305 rolled SKU: 64099030](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099030/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1000mm long single-start right material 1.4305 rolled SKU: 64099028](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099028/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1000mm long single-start right material 1.4305 rolled SKU: 64099024](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099024/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1000mm long single-start right material 1.4305 rolled SKU: 64099020](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099020/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1000mm long single-start right material 1.4305 rolled SKU: 64099018](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099018/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1000mm long single-start right material 1.4305 rolled SKU: 64099016](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099016/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1000mm long single-start right material 1.4305 rolled SKU: 64099014](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099014/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1000mm long single-start right material 1.4305 rolled SKU: 64099012](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099012/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1000mm long single-start right material 1.4305 rolled SKU: 64099010](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099010/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 3000mm long single-start left material C15 rolled SKU: 64087000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-3000mm-long-single-start-left-material-c15-rolled-sku-64087000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 3000mm long single-start left material C15 rolled SKU: 64086000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-3000mm-long-single-start-left-material-c15-rolled-sku-64086000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 3000mm long single-start left material C15 rolled SKU: 64085200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-3000mm-long-single-start-left-material-c15-rolled-sku-64085200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 3000mm long single-start left material C15 rolled SKU: 64085000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-3000mm-long-single-start-left-material-c15-rolled-sku-64085000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 3000mm long single-start left material C15 rolled SKU: 64084800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-3000mm-long-single-start-left-material-c15-rolled-sku-64084800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 3000mm long single-start left material C15 rolled SKU: 64084400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-3000mm-long-single-start-left-material-c15-rolled-sku-64084400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 3000mm long single-start left material C15 rolled SKU: 64084000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-3000mm-long-single-start-left-material-c15-rolled-sku-64084000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 3000mm long single-start left material C15 rolled SKU: 64083600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-3000mm-long-single-start-left-material-c15-rolled-sku-64083600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 3000mm long single-start left material C15 rolled SKU: 64083200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-3000mm-long-single-start-left-material-c15-rolled-sku-64083200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 3000mm long single-start left material C15 rolled SKU: 64083000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-3000mm-long-single-start-left-material-c15-rolled-sku-64083000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 3000mm long single-start left material C15 rolled SKU: 64082800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-3000mm-long-single-start-left-material-c15-rolled-sku-64082800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 3000mm long single-start left material C15 rolled SKU: 64082400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-3000mm-long-single-start-left-material-c15-rolled-sku-64082400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 3000mm long single-start left material C15 rolled SKU: 64082000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-3000mm-long-single-start-left-material-c15-rolled-sku-64082000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 3000mm long single-start left material C15 rolled SKU: 64081800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 3000mm long single-start left material C15 rolled SKU: 64081600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 3000mm long single-start left material C15 rolled SKU: 64081400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 3000mm long single-start left material C15 rolled SKU: 64081200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 3000mm long single-start left material C15 rolled SKU: 64081000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 2000mm long single-start left material C15 rolled SKU: 64067000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-2000mm-long-single-start-left-material-c15-rolled-sku-64067000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 2000mm long single-start left material C15 rolled SKU: 64066000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-2000mm-long-single-start-left-material-c15-rolled-sku-64066000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 2000mm long single-start left material C15 rolled SKU: 64065200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-2000mm-long-single-start-left-material-c15-rolled-sku-64065200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 2000mm long single-start left material C15 rolled SKU: 64065000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-2000mm-long-single-start-left-material-c15-rolled-sku-64065000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 2000mm long single-start left material C15 rolled SKU: 64064800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-2000mm-long-single-start-left-material-c15-rolled-sku-64064800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 2000mm long single-start left material C15 rolled SKU: 64064400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-2000mm-long-single-start-left-material-c15-rolled-sku-64064400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 2000mm long single-start left material C15 rolled SKU: 64064000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-2000mm-long-single-start-left-material-c15-rolled-sku-64064000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 2000mm long single-start left material C15 rolled SKU: 64063600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-2000mm-long-single-start-left-material-c15-rolled-sku-64063600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 2000mm long single-start left material C15 rolled SKU: 64063200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-2000mm-long-single-start-left-material-c15-rolled-sku-64063200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 2000mm long single-start left material C15 rolled SKU: 64063000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-2000mm-long-single-start-left-material-c15-rolled-sku-64063000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 2000mm long single-start left material C15 rolled SKU: 64062800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-2000mm-long-single-start-left-material-c15-rolled-sku-64062800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 2000mm long single-start left material C15 rolled SKU: 64062400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-2000mm-long-single-start-left-material-c15-rolled-sku-64062400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 2000mm long single-start left material C15 rolled SKU: 64062000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-2000mm-long-single-start-left-material-c15-rolled-sku-64062000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 2000mm long single-start left material C15 rolled SKU: 64061800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 2000mm long single-start left material C15 rolled SKU: 64061600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 2000mm long single-start left material C15 rolled SKU: 64061400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start left material C15 rolled SKU: 64061200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 2000mm long single-start left material C15 rolled SKU: 64061000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 1500mm long single-start left material C15 rolled SKU: 64057000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-1500mm-long-single-start-left-material-c15-rolled-sku-64057000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 1500mm long single-start left material C15 rolled SKU: 64056000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-1500mm-long-single-start-left-material-c15-rolled-sku-64056000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 1500mm long single-start left material C15 rolled SKU: 64055200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-1500mm-long-single-start-left-material-c15-rolled-sku-64055200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1500mm long single-start left material C15 rolled SKU: 64055000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1500mm-long-single-start-left-material-c15-rolled-sku-64055000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 1500mm long single-start left material C15 rolled SKU: 64054800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-1500mm-long-single-start-left-material-c15-rolled-sku-64054800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 1500mm long single-start left material C15 rolled SKU: 64054400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-1500mm-long-single-start-left-material-c15-rolled-sku-64054400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1500mm long single-start left material C15 rolled SKU: 64054000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1500mm-long-single-start-left-material-c15-rolled-sku-64054000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1500mm long single-start left material C15 rolled SKU: 64053600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1500mm-long-single-start-left-material-c15-rolled-sku-64053600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 1500mm long single-start left material C15 rolled SKU: 64053200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-1500mm-long-single-start-left-material-c15-rolled-sku-64053200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1500mm long single-start left material C15 rolled SKU: 64053000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1500mm-long-single-start-left-material-c15-rolled-sku-64053000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1500mm long single-start left material C15 rolled SKU: 64052800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1500mm-long-single-start-left-material-c15-rolled-sku-64052800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1500mm long single-start left material C15 rolled SKU: 64052400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1500mm-long-single-start-left-material-c15-rolled-sku-64052400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1500mm long single-start left material C15 rolled SKU: 64052000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1500mm-long-single-start-left-material-c15-rolled-sku-64052000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1500mm long single-start left material C15 rolled SKU: 64051800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1500mm long single-start left material C15 rolled SKU: 64051600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1500mm long single-start left material C15 rolled SKU: 64051400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1500mm long single-start left material C15 rolled SKU: 64051200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1500mm long single-start left material C15 rolled SKU: 64051000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x1000mm long single-start left material C15 rolled SKU: 64047000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x1000mm-long-single-start-left-material-c15-rolled-sku-64047000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 1000mm long single-start left material C15 rolled SKU: 64046000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-1000mm-long-single-start-left-material-c15-rolled-sku-64046000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 1000mm long single-start left material C15 rolled SKU: 64045200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-1000mm-long-single-start-left-material-c15-rolled-sku-64045200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1000mm long single-start left material C15 rolled SKU: 64045000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1000mm-long-single-start-left-material-c15-rolled-sku-64045000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 1000mm long single-start left material C15 rolled SKU: 64044800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-1000mm-long-single-start-left-material-c15-rolled-sku-64044800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 1000mm long single-start left material C15 rolled SKU: 64044400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-1000mm-long-single-start-left-material-c15-rolled-sku-64044400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1000mm long single-start left material C15 rolled SKU: 64044000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1000mm-long-single-start-left-material-c15-rolled-sku-64044000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1000mm long single-start left material C15 rolled SKU: 64043600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1000mm-long-single-start-left-material-c15-rolled-sku-64043600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 1000mm long single-start left material C15 rolled SKU: 64043200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-1000mm-long-single-start-left-material-c15-rolled-sku-64043200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1000mm long single-start left material C15 rolled SKU: 64043000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1000mm-long-single-start-left-material-c15-rolled-sku-64043000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1000 mm long single-start left material C15 rolled SKU: 64042800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1000-mm-long-single-start-left-material-c15-rolled-sku-64042800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1000mm long single-start left material C15 rolled SKU: 64042400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1000mm-long-single-start-left-material-c15-rolled-sku-64042400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1000mm long single-start left material C15 rolled SKU: 64042000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1000mm-long-single-start-left-material-c15-rolled-sku-64042000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1000mm long single-start left material C15 rolled SKU: 64041800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1000mm long single-start left material C15 rolled SKU: 64041600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1000mm long single-start left material C15 rolled SKU: 64041400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1000mm long single-start left material C15 rolled SKU: 64041200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1000mm long single-start left material C15 rolled SKU: 64041000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 3000mm long single-start right material C15 rolled SKU: 64037000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-3000mm-long-single-start-right-material-c15-rolled-sku-64037000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 3000mm long single-start right material C15 rolled SKU: 64036000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-3000mm-long-single-start-right-material-c15-rolled-sku-64036000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 3000mm long single-start right material C15 rolled SKU: 64035200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-3000mm-long-single-start-right-material-c15-rolled-sku-64035200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 3000mm long single-start right material C15 rolled SKU: 64035000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-3000mm-long-single-start-right-material-c15-rolled-sku-64035000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 3000mm long single-start right material C15 rolled SKU: 64034800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-3000mm-long-single-start-right-material-c15-rolled-sku-64034800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 3000mm long single-start right material C15 rolled SKU: 64034400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-3000mm-long-single-start-right-material-c15-rolled-sku-64034400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 3000mm long single-start right material C15 rolled SKU: 64034000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-3000mm-long-single-start-right-material-c15-rolled-sku-64034000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 3000mm long single-start right material C15 rolled SKU: 64033600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-3000mm-long-single-start-right-material-c15-rolled-sku-64033600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 3000mm long single-start right material C15 rolled SKU: 64033200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-3000mm-long-single-start-right-material-c15-rolled-sku-64033200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 3000mm long single-start right material C15 rolled SKU: 64033000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-3000mm-long-single-start-right-material-c15-rolled-sku-64033000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 3000mm long single-start right material C15 rolled SKU: 64032800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-3000mm-long-single-start-right-material-c15-rolled-sku-64032800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 3000mm long single-start right material C15 rolled SKU: 64032400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-3000mm-long-single-start-right-material-c15-rolled-sku-64032400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 3000mm long single-start right material C15 rolled SKU: 64032000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-3000mm-long-single-start-right-material-c15-rolled-sku-64032000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 3000mm long single-start right material C15 rolled SKU: 64031800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 2000mm long double-thread right material C15 rolled SKU: 64524000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64524000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 2000mm long double-thread right material C15 rolled SKU: 64523000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64523000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 2000mm long double-thread right material C15 rolled SKU: 64522400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64522400/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 2000mm long double-thread right material C15 rolled SKU: 64522000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64522000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 2000mm long double-thread right material C15 rolled SKU: 64521600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64521600/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 2000mm long double-thread right material C15 rolled SKU: 64521200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64521200/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 1500mm long double-thread right material C15 rolled SKU: 64514000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64514000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 1500mm long double-thread right material C15 rolled SKU: 64513000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64513000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 1500mm long double-thread right material C15 rolled SKU: 64512400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64512400/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 1500mm long double-thread right material C15 rolled SKU: 64512000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64512000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 1500mm long double-thread right material C15 rolled SKU: 64511600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64511600/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 1500mm long double-thread right material C15 rolled SKU: 64511200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64511200/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 1000mm long double-thread right material C15 rolled SKU: 64504000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64504000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x1000 mm long double-thread right material C15 rolled SKU: 64503000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x1000-mm-long-double-thread-right-material-c15-rolled-sku-64503000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 1000mm long double-thread right material C15 rolled SKU: 64502400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64502400/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 1000mm long double-thread right material C15 rolled SKU: 64502000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64502000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 1000mm long double-thread right material C15 rolled SKU: 64501600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64501600/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 1000mm long double-thread right material C15 rolled SKU: 64501200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64501200/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 3000mm long single-start left material 1.4305 machined SKU: 64099850](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-3000mm-long-single-start-left-material-1-4305-machined-sku-64099850/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 3000mm long single-start left material 1.4305 rolled SKU: 64099840](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099840/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 3000mm long single-start left material 1.4305 rolled SKU: 64099836](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099836/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 3000mm long single-start left material 1.4305 rolled SKU: 64099830](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099830/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 3000mm long single-start left material 1.4305 rolled SKU: 64099828](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099828/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 3000mm long single-start left material 1.4305 rolled SKU: 64099824](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099824/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 3000mm long single-start left material 1.4305 rolled SKU: 64099820](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099820/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 3000mm long single-start left material 1.4305 rolled SKU: 64099818](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099818/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 3000mm long single-start left material 1.4305 rolled SKU: 64099816](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099816/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 3000mm long single-start left material 1.4305 rolled SKU: 64099814](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099814/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 3000mm long single-start left material 1.4305 rolled SKU: 64099812](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099812/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 3000mm long single-start left material 1.4305 rolled SKU: 64099810](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099810/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 2000mm long single-start left material 1.4305 machined SKU: 64099650](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-2000mm-long-single-start-left-material-1-4305-machined-sku-64099650/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 2000mm long single-start left material 1.4305 rolled SKU: 64099640](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099640/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 2000mm long single-start left material 1.4305 rolled SKU: 64099636](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099636/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 2000mm long single-start left material 1.4305 rolled SKU: 64099630](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099630/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 2000mm long single-start left material 1.4305 rolled SKU: 64099628](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099628/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 2000mm long single-start left material 1.4305 rolled SKU: 64099624](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099624/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 2000mm long single-start left material 1.4305 rolled SKU: 64099620](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099620/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 2000mm long single-start left material 1.4305 rolled SKU: 64099618](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099618/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 2000mm long single-start left material 1.4305 rolled SKU: 64099616](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099616/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 2000mm long single-start left material 1.4305 rolled SKU: 64099614](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099614/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start left material 1.4305 rolled SKU: 64099612](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099612/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 2000mm long single-start left material 1.4305 rolled SKU: 64099610](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099610/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1500mm long single-start left material 1.4305 machined SKU: 64099550](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1500mm-long-single-start-left-material-1-4305-machined-sku-64099550/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1500mm long single-start left material 1.4305 rolled SKU: 64099540](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099540/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1500mm long single-start left material 1.4305 rolled SKU: 64099536](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099536/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1500mm long single-start left material 1.4305 rolled SKU: 64099530](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099530/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1500mm long single-start left material 1.4305 rolled SKU: 64099528](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099528/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1500mm long single-start left material 1.4305 rolled SKU: 64099524](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099524/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1500mm long single-start left material 1.4305 rolled SKU: 64099520](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099520/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1500mm long single-start left material 1.4305 rolled SKU: 64099518](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099518/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1500mm long single-start left material 1.4305 rolled SKU: 64099516](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099516/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1500mm long single-start left material 1.4305 rolled SKU: 64099514](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099514/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1500mm long single-start left material 1.4305 rolled SKU: 64099512](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099512/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1500mm long single-start left material 1.4305 rolled SKU: 64099510](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099510/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1000mm long single-start left material 1.4305 machined SKU: 64099450](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1000mm-long-single-start-left-material-1-4305-machined-sku-64099450/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1000mm long single-start left material 1.4305 rolled SKU: 64099440](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099440/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1000mm long single-start left material 1.4305 rolled SKU: 64099436](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099436/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1000mm long single-start left material 1.4305 rolled SKU: 64099430](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099430/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1000mm long single-start left material 1.4305 rolled SKU: 64099428](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099428/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1000mm long single-start left material 1.4305 rolled SKU: 64099424](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099424/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1000mm long single-start left material 1.4305 rolled SKU: 64099420](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099420/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1000mm long single-start left material 1.4305 rolled SKU: 64099418](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099418/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1000mm long single-start left material 1.4305 rolled SKU: 64099416](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099416/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1000mm long single-start left material 1.4305 rolled SKU: 64099414](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099414/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1000mm long single-start left material 1.4305 rolled SKU: 64099412](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099412/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1000mm long single-start left material 1.4305 rolled SKU: 64099410](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099410/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 3000mm long single-start right material 1.4305 machined SKU: 64099350](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-3000mm-long-single-start-right-material-1-4305-machined-sku-64099350/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 3000mm long single-start right material 1.4305 rolled SKU: 64099340](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099340/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 3000mm long single-start right material 1.4305 rolled SKU: 64099336](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099336/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 3000mm long single-start right material 1.4305 rolled SKU: 64099330](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099330/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 3000mm long single-start right material 1.4305 rolled SKU: 64099328](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099328/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 3000mm long single-start right material 1.4305 rolled SKU: 64099324](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099324/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 3000mm long single-start right material 1.4305 rolled SKU: 64099320](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099320/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 3000mm long single-start right material 1.4305 rolled SKU: 64099318](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099318/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 3000mm long single-start right material 1.4305 rolled SKU: 64099316](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099316/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 3000mm long single-start right material 1.4305 rolled SKU: 64099314](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099314/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 3000mm long single-start right material 1.4305 rolled SKU: 64099312](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099312/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 3000mm long single-start right material 1.4305 rolled SKU: 64099310](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099310/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 2000mm long single-start right material 1.4305 machined SKU: 64099250](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-2000mm-long-single-start-right-material-1-4305-machined-sku-64099250/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 2000mm long single-start right material 1.4305 rolled SKU: 64099240](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099240/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 2000mm long single-start right material 1.4305 rolled SKU: 64099236](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099236/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 2000mm long single-start right material 1.4305 rolled SKU: 64099230](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099230/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 2000mm long single-start right material 1.4305 rolled SKU: 64099228](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099228/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 2000mm long single-start right material 1.4305 rolled SKU: 64099224](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099224/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 2000mm long single-start right material 1.4305 rolled SKU: 64099220](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099220/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 2000mm long single-start right material 1.4305 rolled SKU: 64099218](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099218/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 2000mm long single-start right material 1.4305 rolled SKU: 64099216](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099216/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 2000mm long single-start right material 1.4305 rolled SKU: 64099214](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099214/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start right material 1.4305 rolled SKU: 64099212](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099212/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 2000mm long single-start right material 1.4305 rolled SKU: 64099210](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099210/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1500mm long single-start right material 1.4305 machined SKU: 64099150](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1500mm-long-single-start-right-material-1-4305-machined-sku-64099150/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1500mm long single-start right material 1.4305 rolled SKU: 64099140](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099140/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1500mm long single-start right material 1.4305 rolled SKU: 64099136](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099136/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1500mm long single-start right material 1.4305 rolled SKU: 64099130](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099130/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1500mm long single-start right material 1.4305 rolled SKU: 64099128](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099128/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1500mm long single-start right material 1.4305 rolled SKU: 64099124](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099124/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1500mm long single-start right material 1.4305 rolled SKU: 64099120](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099120/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1500mm long single-start right material 1.4305 rolled SKU: 64099118](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099118/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1500mm long single-start right material 1.4305 rolled SKU: 64099116](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099116/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1500mm long single-start right material 1.4305 rolled SKU: 64099114](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099114/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 50mm SKU: 80525050](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-50mm-sku-80525050/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 25mm SKU: 80525025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-25mm-sku-80525025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 10mm SKU: 80525010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-10mm-sku-80525010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 200mm SKU: 80520200](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-200mm-sku-80520200/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 160mm SKU: 80520160](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-160mm-sku-80520160/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 125mm SKU: 80520125](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-125mm-sku-80520125/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 100mm SKU: 80520100](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-100mm-sku-80520100/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 80mm SKU: 80520080](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-80mm-sku-80520080/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 50mm SKU: 80520050](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-50mm-sku-80520050/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 25mm SKU: 80520025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-25mm-sku-80520025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 10mm SKU: 80520010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-10mm-sku-80520010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 16mm, travel 50mm SKU: 80516050](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-16mm-travel-50mm-sku-80516050/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 16mm, travel 25mm SKU: 80516025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-16mm-travel-25mm-sku-80516025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 16mm, travel 10mm SKU: 80516010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-16mm-travel-10mm-sku-80516010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 12mm, travel 25mm SKU: 80512025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-12mm-travel-25mm-sku-80512025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 12mm, travel 10mm SKU: 80512010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-12mm-travel-10mm-sku-80512010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 10mm, travel 25mm SKU: 80510025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-10mm-travel-25mm-sku-80510025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 10mm, travel 10mm SKU: 80510010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-10mm-travel-10mm-sku-80510010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 40mm, travel 50mm SKU: 80340050](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-40mm-travel-50mm-sku-80340050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 40mm, travel 25mm SKU: 80340025](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-40mm-travel-25mm-sku-80340025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 40mm, travel 10mm SKU: 80340010](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-40mm-travel-10mm-sku-80340010/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 32mm, travel 50mm SKU: 80332050](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-32mm-travel-50mm-sku-80332050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 32mm, travel 25mm SKU: 80332025](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-32mm-travel-25mm-sku-80332025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 32mm, travel 10mm SKU: 80332010](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-32mm-travel-10mm-sku-80332010/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 25mm, travel 50mm SKU: 80325050](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-25mm-travel-50mm-sku-80325050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 25mm, travel 25mm SKU: 80325025](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-25mm-travel-25mm-sku-80325025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 25mm, travel 10mm SKU: 80325010](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-25mm-travel-10mm-sku-80325010/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 20mm, travel 50mm SKU: 80320050](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-20mm-travel-50mm-sku-80320050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 20mm, travel 25mm SKU: 80320025](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-20mm-travel-25mm-sku-80320025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 20mm, travel 10mm SKU: 80320010](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-20mm-travel-10mm-sku-80320010/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 250mm pressure max. 12 bar SKU: 80180250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-250mm-pressure-max-12-bar-sku-80180250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 200mm pressure max. 12 bar SKU: 80180200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-200mm-pressure-max-12-bar-sku-80180200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 160mm pressure max. 12 bar SKU: 80180160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-160mm-pressure-max-12-bar-sku-80180160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 125mm pressure max. 12 bar SKU: 80180125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-125mm-pressure-max-12-bar-sku-80180125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 100mm pressure max. 12 bar SKU: 80180100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-100mm-pressure-max-12-bar-sku-80180100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 80mm pressure max. 12 bar SKU: 80180080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-80mm-pressure-max-12-bar-sku-80180080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 50mm pressure max. 12 bar SKU: 80180050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-50mm-pressure-max-12-bar-sku-80180050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 25mm pressure max. 12 bar SKU: 80180025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-25mm-pressure-max-12-bar-sku-80180025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 250mm pressure max. 12 bar SKU: 80163250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-250mm-pressure-max-12-bar-sku-80163250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 200mm pressure max. 12 bar SKU: 80163200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-200mm-pressure-max-12-bar-sku-80163200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 160mm pressure max. 12 bar SKU: 80163160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-160mm-pressure-max-12-bar-sku-80163160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 125mm pressure max. 12 bar SKU: 80163125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-125mm-pressure-max-12-bar-sku-80163125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 100mm pressure max. 12 bar SKU: 80163100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-100mm-pressure-max-12-bar-sku-80163100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 80mm pressure max. 12 bar SKU: 80163080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-80mm-pressure-max-12-bar-sku-80163080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 50mm pressure max. 12 bar SKU: 80163050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-50mm-pressure-max-12-bar-sku-80163050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 25mm pressure max. 12 bar SKU: 80163025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-25mm-pressure-max-12-bar-sku-80163025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 250mm pressure max. 12 bar SKU: 80150250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-250mm-pressure-max-12-bar-sku-80150250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 200mm pressure max. 12 bar SKU: 80150200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-200mm-pressure-max-12-bar-sku-80150200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 160mm pressure max. 12 bar SKU: 80150160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-160mm-pressure-max-12-bar-sku-80150160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 125mm pressure max. 12 bar SKU: 80150125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-125mm-pressure-max-12-bar-sku-80150125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 100mm pressure max. 12 bar SKU: 80150100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-100mm-pressure-max-12-bar-sku-80150100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 80mm pressure max. 12 bar SKU: 80150080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-80mm-pressure-max-12-bar-sku-80150080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 50mm pressure max. 12 bar SKU: 80150050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-50mm-pressure-max-12-bar-sku-80150050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 25mm pressure max. 12 bar SKU: 80150025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-25mm-pressure-max-12-bar-sku-80150025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 250mm pressure max. 12 bar SKU: 80140250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-250mm-pressure-max-12-bar-sku-80140250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 200mm pressure max. 12 bar SKU: 80140200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-200mm-pressure-max-12-bar-sku-80140200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 160mm pressure max. 12 bar SKU: 80140160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-160mm-pressure-max-12-bar-sku-80140160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 125mm pressure max. 12 bar SKU: 80140125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-125mm-pressure-max-12-bar-sku-80140125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 100mm pressure max. 12 bar SKU: 80140100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-100mm-pressure-max-12-bar-sku-80140100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 80mm pressure max. 12 bar SKU: 80140080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-80mm-pressure-max-12-bar-sku-80140080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 50mm pressure max. 12 bar SKU: 80140050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-50mm-pressure-max-12-bar-sku-80140050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 25mm pressure max. 12 bar SKU: 80140025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-25mm-pressure-max-12-bar-sku-80140025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 250mm pressure max. 12 bar SKU: 80132250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-250mm-pressure-max-12-bar-sku-80132250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 200mm pressure max. 12 bar SKU: 80132200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-200mm-pressure-max-12-bar-sku-80132200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 160mm pressure max. 12 bar SKU: 80132160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-160mm-pressure-max-12-bar-sku-80132160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 125mm pressure max. 12 bar SKU: 80132125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-125mm-pressure-max-12-bar-sku-80132125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 100mm pressure max. 12 bar SKU: 80132100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-100mm-pressure-max-12-bar-sku-80132100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 80mm pressure max. 12 bar SKU: 80132080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-80mm-pressure-max-12-bar-sku-80132080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 50mm pressure max. 12 bar SKU: 80132050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-50mm-pressure-max-12-bar-sku-80132050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 25mm pressure max. 12 bar SKU: 80132025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-25mm-pressure-max-12-bar-sku-80132025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599340](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599340/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599330](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599330/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599324](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599324/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599320](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599320/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599316](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599316/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599312](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599312/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599240](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599240/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599230](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599230/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599224](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599224/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599220](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599220/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599216](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599216/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599212](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599212/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599140](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599140/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599130](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599130/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599124](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599124/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599120](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599120/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599116](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599116/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599112](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599112/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 1000mm long double-thread right material 1.4305 rolled SKU: 64599040](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-1000mm-long-double-thread-right-material-1-4305-rolled-sku-64599040/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x1000 mm long double-thread right material 1.4305 rolled SKU: 64599030](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x1000-mm-long-double-thread-right-material-1-4305-rolled-sku-64599030/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 1000mm long double-thread right material 1.4305 rolled SKU: 64599024](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-1000mm-long-double-thread-right-material-1-4305-rolled-sku-64599024/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 1000mm long double-thread right Materila 1.4305 rolled SKU: 64599020](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-1000mm-long-double-thread-right-materila-1-4305-rolled-sku-64599020/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 1000mm long double-thread right material 1.4305 rolled SKU: 64599016](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-1000mm-long-double-thread-right-material-1-4305-rolled-sku-64599016/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 1000mm long double-thread right material 1.4305 rolled SKU: 64599012](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-1000mm-long-double-thread-right-material-1-4305-rolled-sku-64599012/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 3000mm long double-thread right material C15 rolled SKU: 64534000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64534000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 3000mm long double-thread right material C15 rolled SKU: 64533000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64533000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 3000mm long double-thread right material C15 rolled SKU: 64532400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64532400/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 3000mm long double-thread right material C15 rolled SKU: 64532000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64532000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 3000mm long double-thread right material C15 rolled SKU: 64531600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64531600/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 3000mm long double-thread right material C15 rolled SKU: 64531200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64531200/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Rear hinge mounting with snap ring for cylinder diameter 20/25mm SKU: 81002320](https://maedler.in/product/rear-hinge-mounting-with-snap-ring-for-cylinder-diameter-20-25mm-sku-81002320/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with snap ring for cylinder diameter 12/16mm SKU: 81002312](https://maedler.in/product/rear-hinge-mounting-with-snap-ring-for-cylinder-diameter-12-16mm-sku-81002312/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with snap ring for cylinder diameter 10mm SKU: 81002310](https://maedler.in/product/rear-hinge-mounting-with-snap-ring-for-cylinder-diameter-10mm-sku-81002310/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with cotter pin for cylinder diameter 20/25mm SKU: 81002220](https://maedler.in/product/rear-hinge-mounting-with-cotter-pin-for-cylinder-diameter-20-25mm-sku-81002220/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with cotter pin for cylinder diameter 12/16mm SKU: 81002212](https://maedler.in/product/rear-hinge-mounting-with-cotter-pin-for-cylinder-diameter-12-16mm-sku-81002212/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with cotter pin for cylinder diameter 10mm SKU: 81002210](https://maedler.in/product/rear-hinge-mounting-with-cotter-pin-for-cylinder-diameter-10mm-sku-81002210/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Detachable trunnion mounting for cylinder diameter 20/25mm SKU: 81002120](https://maedler.in/product/detachable-trunnion-mounting-for-cylinder-diameter-20-25mm-sku-81002120/): Material: teel, zinc-plated. Mounting element at the bearing or end cover. - [Detachable trunnion mounting for cylinder diameter 12/16mm SKU: 81002112](https://maedler.in/product/detachable-trunnion-mounting-for-cylinder-diameter-12-16mm-sku-81002112/): Material: teel, zinc-plated. Mounting element at the bearing or end cover. - [Foot for cylinder diameter 20/25mm SKU: 81002020](https://maedler.in/product/foot-for-cylinder-diameter-20-25mm-sku-81002020/): Materials: Mounting: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Foot for cylinder diameter 12mm SKU: 81002012](https://maedler.in/product/foot-for-cylinder-diameter-12mm-sku-81002012/): Materials: Mounting: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Foot for cylinder diameter 10mm SKU: 81002010](https://maedler.in/product/foot-for-cylinder-diameter-10mm-sku-81002010/): Materials: Mounting: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Switch mounting bracket for magnetic switch for cylinder diameter 25mm SKU: 81001725](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-25mm-sku-81001725/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Switch mounting bracket for magnetic switch for cylinder diameter 20mm SKU: 81001720](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-20mm-sku-81001720/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Switch mounting bracket for magnetic switch for cylinder diameter 16mm SKU: 81001716](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-16mm-sku-81001716/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Switch mounting bracket for magnetic switch for cylinder diameter 12mm SKU: 81001712](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-12mm-sku-81001712/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Switch mounting bracket for magnetic switch for cylinder diameter 10mm SKU: 81001710](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-10mm-sku-81001710/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Swivel bearing set for detachable trunnion mounting for cylinder diameter 63/80mm SKU: 81001563](https://maedler.in/product/swivel-bearing-set-for-detachable-trunnion-mounting-for-cylinder-diameter-63-80mm-sku-81001563/): Materials: Mounting: Aluminium. Bearing: Sintered bronze. Mounting element for Trunnion Mounting. 2 bearings included in delivery. - [Swivel bearing set for detachable trunnion mounting for cylinder diameter 40/50mm SKU: 81001540](https://maedler.in/product/swivel-bearing-set-for-detachable-trunnion-mounting-for-cylinder-diameter-40-50mm-sku-81001540/): Materials: Mounting: Aluminium. Bearing: Sintered bronze. Mounting element for Trunnion Mounting. 2 bearings included in delivery. - [Swivel bearing set for detachable trunnion mounting for cylinder diameter 32mm SKU: 81001532](https://maedler.in/product/swivel-bearing-set-for-detachable-trunnion-mounting-for-cylinder-diameter-32mm-sku-81001532/): Materials: Mounting: Aluminium. Bearing: Sintered bronze. Mounting element for Trunnion Mounting. 2 bearings included in delivery. - [Detachable trunnion mounting (front or rear) for cylinder diameter 80mm SKU: 81001380](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-80mm-sku-81001380/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Detachable trunnion mounting (front or rear) for cylinder diameter 63mm SKU: 81001363](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-63mm-sku-81001363/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Detachable trunnion mounting (front or rear) for cylinder diameter 50mm SKU: 81001350](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-50mm-sku-81001350/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Detachable trunnion mounting (front or rear) for cylinder diameter 40mm SKU: 81001340](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-40mm-sku-81001340/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Detachable trunnion mounting (front or rear) for cylinder diameter 32mm SKU: 81001332](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-32mm-sku-81001332/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Universal rear eye with ball joint for cylinder diameter 80mm SKU: 81001280](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-80mm-sku-81001280/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Universal rear eye with ball joint for cylinder diameter 63mm SKU: 81001263](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-63mm-sku-81001263/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Universal rear eye with ball joint for cylinder diameter 50mm SKU: 81001250](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-50mm-sku-81001250/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Universal rear eye with ball joint for cylinder diameter 40mm SKU: 81001240](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-40mm-sku-81001240/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Universal rear eye with ball joint for cylinder diameter 32mm SKU: 81001232](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-32mm-sku-81001232/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 80mm SKU: 81001180](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-80mm-sku-81001180/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 63mm SKU: 81001163](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-63mm-sku-81001163/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 50mm SKU: 81001150](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-50mm-sku-81001150/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 40mm SKU: 81001140](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-40mm-sku-81001140/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 32mm SKU: 81001132](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-32mm-sku-81001132/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 80mm SKU: 81001080](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-80mm-sku-81001080/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 63mm SKU: 81001063](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-63mm-sku-81001063/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 50mm SKU: 81001050](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-50mm-sku-81001050/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 40mm SKU: 81001040](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-40mm-sku-81001040/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 32mm SKU: 81001032](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-32mm-sku-81001032/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 80mm SKU: 81000980](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-80mm-sku-81000980/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 63mm SKU: 81000963](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-63mm-sku-81000963/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 50mm SKU: 81000950](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-50mm-sku-81000950/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 40mm SKU: 81000940](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-40mm-sku-81000940/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 32mm SKU: 81000932](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-32mm-sku-81000932/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Rear clevis , narrow version for cylinder diameter 80mm SKU: 81000880](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-80mm-sku-81000880/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis , narrow version for cylinder diameter 63mm SKU: 81000863](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-63mm-sku-81000863/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis , narrow version for cylinder diameter 50mm SKU: 81000850](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-50mm-sku-81000850/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis , narrow version for cylinder diameter 40mm SKU: 81000840](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-40mm-sku-81000840/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis , narrow version for cylinder diameter 32mm SKU: 81000832](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-32mm-sku-81000832/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 80mm SKU: 81000780](https://maedler.in/product/rear-clevis-for-cylinder-diameter-80mm-sku-81000780/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 63mm SKU: 81000763](https://maedler.in/product/rear-clevis-for-cylinder-diameter-63mm-sku-81000763/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 50mm SKU: 81000750](https://maedler.in/product/rear-clevis-for-cylinder-diameter-50mm-sku-81000750/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 40mm SKU: 81000740](https://maedler.in/product/rear-clevis-for-cylinder-diameter-40mm-sku-81000740/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 32mm SKU: 81000732](https://maedler.in/product/rear-clevis-for-cylinder-diameter-32mm-sku-81000732/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rod end with ball joint for cylinder diameter 80mm thread M20x1,5 SKU: 81000580](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-80mm-thread-m20x15-sku-81000580/): Materials: Mounting: Steel, zinc plated. Inner ring: Bearing steel, hardened. Outer ring: Brass. Mounting element at the piston rod. - [Rod end with ball joint for cylinder diameter 50/63mm thread M16x1,5 SKU: 81000550](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-50-63mm-thread-m16x15-sku-81000550/): Materials: Mounting: Steel, zinc plated. Inner ring: Bearing steel, hardened. Outer ring: Brass. Mounting element at the piston rod. - [Rod end with ball joint for cylinder diameter 40mm thread M12x1,25 SKU: 81000540](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-40mm-thread-m12x125-sku-81000540/): Materials: Mounting: Steel, zinc plated. Inner ring: Bearing steel, hardened. Outer ring: Brass. Mounting element at the piston rod. - [Rod end with ball joint for cylinder diameter 25/32mm thread M10x1,25 SKU: 81000525](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-25-32mm-thread-m10x125-sku-81000525/): Materials: Mounting: Steel, zinc plated. Inner ring: Bearing steel, hardened. Outer ring: Brass. Mounting element at the piston rod. - [Rod end with ball joint for cylinder diameter 20mm thread M8 SKU: 81000520](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-20mm-thread-m8-sku-81000520/): Materials: Housing: Brass. Mounting: Steel, zinc-plated. Inner ring: Roller bearing steel, hardened. Mounting element at the piston rod according to DIN ISO 8139 / CETOP RP 103 P. - [Rod end with ball joint for cylinder diameter 12mm thread M6 SKU: 81000512](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-12mm-thread-m6-sku-81000512/): Materials: Housing: Brass. Mounting: Steel, zinc-plated. Inner ring: Roller bearing steel, hardened. Mounting element at the piston rod according to DIN ISO 8139 / CETOP RP 103 P. - [Rod end with ball joint for cylinder diameter 10mm thread M4 SKU: 81000510](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-10mm-thread-m4-sku-81000510/): Materials: Housing: Brass. Mounting: Steel, zinc-plated. Inner ring: Roller bearing steel, hardened. Mounting element at the piston rod according to DIN ISO 8139 / CETOP RP 103 P. - [Universal rear eye for cylinder diameter 80mm SKU: 81000480](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-80mm-sku-81000480/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 63mm SKU: 81000463](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-63mm-sku-81000463/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 50mm SKU: 81000450](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-50mm-sku-81000450/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 40mm SKU: 81000440](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-40mm-sku-81000440/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 32mm SKU: 81000432](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-32mm-sku-81000432/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 25mm SKU: 81000425](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-25mm-sku-81000425/): Materials: Mounting: Aluminium, die-cast. Screws: Steel, zinc-plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 20mm SKU: 81000420](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-20mm-sku-81000420/): Materials: Mounting: Aluminium, die-cast. Screws: Steel, zinc-plated. Mounting element at the end cover. - [Fork head for cylinder diameter 80mm M20x1,5 SKU: 81000380](https://maedler.in/product/fork-head-for-cylinder-diameter-80mm-m20x15-sku-81000380/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 50/63mm M16x1,5 SKU: 81000350](https://maedler.in/product/fork-head-for-cylinder-diameter-50-63mm-m16x15-sku-81000350/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 40mm M12x1,25 SKU: 81000340](https://maedler.in/product/fork-head-for-cylinder-diameter-40mm-m12x125-sku-81000340/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 25/32mm M10x1,25 SKU: 81000325](https://maedler.in/product/fork-head-for-cylinder-diameter-25-32mm-m10x125-sku-81000325/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 20mm thread M8 SKU: 81000320](https://maedler.in/product/fork-head-for-cylinder-diameter-20mm-thread-m8-sku-81000320/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 12mm thread M6 SKU: 81000312](https://maedler.in/product/fork-head-for-cylinder-diameter-12mm-thread-m6-sku-81000312/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 10mm thread M4 SKU: 81000310](https://maedler.in/product/fork-head-for-cylinder-diameter-10mm-thread-m4-sku-81000310/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Foot for cylinder diameter 80mm SKU: 81000280](https://maedler.in/product/foot-for-cylinder-diameter-80mm-sku-81000280/): Materials: Mounting: Steel, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing and at the end cover. - [Foot for cylinder diameter 63mm SKU: 81000263](https://maedler.in/product/foot-for-cylinder-diameter-63mm-sku-81000263/): Materials: Mounting: Steel, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing and at the end cover. - [Foot for cylinder diameter 50mm SKU: 81000250](https://maedler.in/product/foot-for-cylinder-diameter-50mm-sku-81000250/): Materials: Mounting: Steel, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing and at the end cover. - [Foot for cylinder diameter 40mm SKU: 81000240](https://maedler.in/product/foot-for-cylinder-diameter-40mm-sku-81000240/): Materials: Mounting: Steel, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing and at the end cover. - [Foot for cylinder diameter 32mm SKU: 81000232](https://maedler.in/product/foot-for-cylinder-diameter-32mm-sku-81000232/): Materials: Mounting: Steel, zinc-plated. Screws: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Foot for cylinder diameter 25mm SKU: 81000225](https://maedler.in/product/foot-for-cylinder-diameter-25mm-sku-81000225/): Materials: Mounting: Steel, zinc-plated. Screws: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Foot for cylinder diameter 20mm SKU: 81000220](https://maedler.in/product/foot-for-cylinder-diameter-20mm-sku-81000220/): Materials: Mounting: Steel, zinc-plated. Screws: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Front and rear flange for cylinder diameter 80mm SKU: 81000180](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-80mm-sku-81000180/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Front and rear flange for cylinder diameter 63mm SKU: 81000163](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-63mm-sku-81000163/): Materials: Mounting: Aluminium. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Front and rear flange for cylinder diameter 50mm SKU: 81000150](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-50mm-sku-81000150/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Front and rear flange for cylinder diameter 40mm SKU: 81000140](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-40mm-sku-81000140/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Front and rear flange for cylinder diameter 32mm SKU: 81000132](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-32mm-sku-81000132/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Front and rear flange for cylinder diameter 20mm SKU: 81000120](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-20mm-sku-81000120/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Beam coupling for cylinder diameter 80mm thread M20x1,5 SKU: 81000080](https://maedler.in/product/beam-coupling-for-cylinder-diameter-80mm-thread-m20x15-sku-81000080/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 50/63mm thread M16x1,5 SKU: 81000050](https://maedler.in/product/beam-coupling-for-cylinder-diameter-50-63mm-thread-m16x15-sku-81000050/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 40mm thread M12x1,25 SKU: 81000040](https://maedler.in/product/beam-coupling-for-cylinder-diameter-40mm-thread-m12x125-sku-81000040/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 25/32 mm thread M10x1,25 SKU: 81000025](https://maedler.in/product/beam-coupling-for-cylinder-diameter-25-32-mm-thread-m10x125-sku-81000025/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 20mm SKU: 81000020](https://maedler.in/product/beam-coupling-for-cylinder-diameter-20mm-sku-81000020/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 12mm SKU: 81000012](https://maedler.in/product/beam-coupling-for-cylinder-diameter-12mm-sku-81000012/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 10mm SKU: 81000010](https://maedler.in/product/beam-coupling-for-cylinder-diameter-10mm-sku-81000010/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 200mm SKU: 80525200](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-200mm-sku-80525200/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 160mm SKU: 80525160](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-160mm-sku-80525160/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 125mm SKU: 80525125](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-125mm-sku-80525125/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 100mm SKU: 80525100](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-100mm-sku-80525100/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 80mm SKU: 80525080](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-80mm-sku-80525080/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 52mm width 15mm with stainless steel shields on both sides SKU: SS-6205-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-52mm-width-15mm-with-stainless-steel-shields-on-both-sides-sku-ss-6205-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 47mm width 14mm with blue NBR seals on both sides SKU: SS-6204-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-47mm-width-14mm-with-blue-nbr-seals-on-both-sides-sku-ss-6204-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 47mm width 14mm with stainless steel shields on both sides SKU: SS-6204-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-47mm-width-14mm-with-stainless-steel-shields-on-both-sides-sku-ss-6204-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 40mm width 12mm with blue NBR seals on both sides SKU: SS-6203-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-40mm-width-12mm-with-blue-nbr-seals-on-both-sides-sku-ss-6203-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 40mm width 12mm with stainless steel shields on both sides SKU: SS-6203-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-40mm-width-12mm-with-stainless-steel-shields-on-both-sides-sku-ss-6203-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 35mm width 11mm with blue NBR seals on both sides SKU: SS-6202-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-35mm-width-11mm-with-blue-nbr-seals-on-both-sides-sku-ss-6202-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 35mm width 11mm with stainless steel shields on both sides SKU: SS-6202-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-35mm-width-11mm-with-stainless-steel-shields-on-both-sides-sku-ss-6202-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 32mm width 10mm with blue NBR seals on both sides SKU: SS-6201-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-32mm-width-10mm-with-blue-nbr-seals-on-both-sides-sku-ss-6201-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 32mm width 10mm with stainless steel shields on both sides SKU: SS-6201-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-32mm-width-10mm-with-stainless-steel-shields-on-both-sides-sku-ss-6201-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 30mm width 9mm with blue NBR seals on both sides SKU: SS-6200-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-30mm-width-9mm-with-blue-nbr-seals-on-both-sides-sku-ss-6200-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 30mm width 9mm with stainless steel shields on both sides SKU: SS-6200-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-30mm-width-9mm-with-stainless-steel-shields-on-both-sides-sku-ss-6200-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 45mm outer Ø 68mm width 12mm with blue NBR seals on both sides alternative marking 6909 SKU: SS-61909-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-45mm-outer-o-68mm-width-12mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6909-sku-ss-61909-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 40mm outer Ø 62mm width 12mm with blue NBR seals on both sides alternative marking 6908 SKU: SS-61908-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-40mm-outer-o-62mm-width-12mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6908-sku-ss-61908-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 55mm width 10mm with blue NBR seals on both sides alternative marking 6907 SKU: SS-61907-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-55mm-width-10mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6907-sku-ss-61907-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 47mm width 9mm with blue NBR seals on both sides alternative marking 6906 SKU: SS-61906-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-47mm-width-9mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6906-sku-ss-61906-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 42mm width 9mm with blue NBR seals on both sides alternative marking 6905 SKU: SS-61905-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-42mm-width-9mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6905-sku-ss-61905-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 37mm width 9mm with blue NBR seals on both sides alternative marking 6904 SKU: SS-61904-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-37mm-width-9mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6904-sku-ss-61904-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 30mm width 7mm with blue NBR seals on both sides alternative marking 6903 SKU: SS-61903-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-30mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6903-sku-ss-61903-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 28mm width 7mm with blue NBR seals on both sides alternative marking 6902 SKU: SS-61902-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-28mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6902-sku-ss-61902-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 28mm width 7mm with stainless steel shields on both sides alternative marking 6902 SKU: SS-61902-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-28mm-width-7mm-with-stainless-steel-shields-on-both-sides-alternative-marking-6902-sku-ss-61902-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 24mm width 6mm with blue NBR seals on both sides alternative marking 6901 SKU: SS-61901-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-24mm-width-6mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6901-sku-ss-61901-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 22mm width 6mm with blue NBR seals on both sides alternative marking 6900 SKU: SS-61900-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-22mm-width-6mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6900-sku-ss-61900-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 45mm outer Ø 58mm width 7mm with blue NBR seals on both sides alternative marking 6809 SKU: SS-61809-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-45mm-outer-o-58mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6809-sku-ss-61809-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 40mm outer Ø 52mm width 7mm with blue NBR seals on both sides alternative marking 6808 SKU: SS-61808-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-40mm-outer-o-52mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6808-sku-ss-61808-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 47mm width 7mm with blue NBR seals on both sides alternative marking 6807 SKU: SS-61807-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-47mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6807-sku-ss-61807-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 42mm width 7mm with blue NBR seals on both sides alternative marking 6806 SKU: SS-61806-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-42mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6806-sku-ss-61806-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 37mm width 7mm with blue NBR seals on both sides alternative marking 6805 SKU: SS-61805-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-37mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6805-sku-ss-61805-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 37mm width 7mm with stainless steel shields on both sides alternative marking 6805 SKU: SS-61805-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-37mm-width-7mm-with-stainless-steel-shields-on-both-sides-alternative-marking-6805-sku-ss-61805-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 32mm width 7mm with blue NBR seals on both sides alternative marking 6804 SKU: SS-61804-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-32mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6804-sku-ss-61804-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 26mm width 5mm with blue NBR seals on both sides alternative marking 6803 SKU: SS-61803-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-26mm-width-5mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6803-sku-ss-61803-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 24mm width 5mm with blue NBR seals on both sides alternative marking 6802 SKU: SS-61802-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-24mm-width-5mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6802-sku-ss-61802-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 21mm width 5mm with blue NBR seals on both sides alternative marking 6801 SKU: SS-61801-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-21mm-width-5mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6801-sku-ss-61801-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 21mm width 5mm with stainless steel shields on both sides alternative marking 6801 SKU: SS-61801-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-21mm-width-5mm-with-stainless-steel-shields-on-both-sides-alternative-marking-6801-sku-ss-61801-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 19mm width 5mm with blue NBR seals on both sides alternative marking 6800 SKU: SS-61800-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-19mm-width-5mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6800-sku-ss-61800-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 9mm outer Ø24mm width 7mm with blue NBR seals on both sides SKU: SS-609-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-9mm-outer-o24mm-width-7mm-with-blue-nbr-seals-on-both-sides-sku-ss-609-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 9mm outer Ø 24mm width 7mm with stainless steel shields on both sides SKU: SS-609-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-9mm-outer-o-24mm-width-7mm-with-stainless-steel-shields-on-both-sides-sku-ss-609-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø22mm width 7mm with blue NBR seals on both sides SKU: SS-608-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o22mm-width-7mm-with-blue-nbr-seals-on-both-sides-sku-ss-608-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø 22mm width 7mm with stainless steel shields on both sides SKU: SS-608-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o-22mm-width-7mm-with-stainless-steel-shields-on-both-sides-sku-ss-608-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø19mm width 6mm with blue NBR seals on both sides SKU: SS-607-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o19mm-width-6mm-with-blue-nbr-seals-on-both-sides-sku-ss-607-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø 19mm width 6mm with stainless steel shields on both sides SKU: SS-607-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o-19mm-width-6mm-with-stainless-steel-shields-on-both-sides-sku-ss-607-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø17mm width 6mm with blue NBR seals on both sides SKU: SS-606-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o17mm-width-6mm-with-blue-nbr-seals-on-both-sides-sku-ss-606-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø 17mm width 6mm with stainless steel shields on both sides SKU: SS-606-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o-17mm-width-6mm-with-stainless-steel-shields-on-both-sides-sku-ss-606-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø14mm width 5mm with blue NBR seals on both sides SKU: SS-605-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o14mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-605-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø 14mm width 5mm with stainless steel shields on both sides SKU: SS-605-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o-14mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-605-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 4mm outer Ø12mm width 4mm with blue NBR seals on both sides SKU: SS-604-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-4mm-outer-o12mm-width-4mm-with-blue-nbr-seals-on-both-sides-sku-ss-604-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 4mm outer Ø 12mm width 4mm with stainless steel shields on both sides SKU: SS-604-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-4mm-outer-o-12mm-width-4mm-with-stainless-steel-shields-on-both-sides-sku-ss-604-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 45mm outer Ø 75mm width 16mm with blue NBR seals on both sides SKU: SS-6009-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-45mm-outer-o-75mm-width-16mm-with-blue-nbr-seals-on-both-sides-sku-ss-6009-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 40mm outer Ø 68mm width 15mm with blue NBR seals on both sides SKU: SS-6008-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-40mm-outer-o-68mm-width-15mm-with-blue-nbr-seals-on-both-sides-sku-ss-6008-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 62mm width 14mm with blue NBR seals on both sides SKU: SS-6007-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-62mm-width-14mm-with-blue-nbr-seals-on-both-sides-sku-ss-6007-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 62mm width 14mm with stainless steel shields on both sides SKU: SS-6007-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-62mm-width-14mm-with-stainless-steel-shields-on-both-sides-sku-ss-6007-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 55mm width 13mm with blue NBR seals on both sides SKU: SS-6006-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-55mm-width-13mm-with-blue-nbr-seals-on-both-sides-sku-ss-6006-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 55mm width 13mm with stainless steel shields on both sides SKU: SS-6006-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-55mm-width-13mm-with-stainless-steel-shields-on-both-sides-sku-ss-6006-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 47mm width 12mm with blue NBR seals on both sides SKU: SS-6005-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-47mm-width-12mm-with-blue-nbr-seals-on-both-sides-sku-ss-6005-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 47mm width 12mm with stainless steel shields on both sides SKU: SS-6005-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-47mm-width-12mm-with-stainless-steel-shields-on-both-sides-sku-ss-6005-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 42mm width 12mm with blue NBR seals on both sides SKU: SS-6004-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-42mm-width-12mm-with-blue-nbr-seals-on-both-sides-sku-ss-6004-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 42mm width 12mm with stainless steel shields on both sides SKU: SS-6004-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-42mm-width-12mm-with-stainless-steel-shields-on-both-sides-sku-ss-6004-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 35mm width 10mm with blue NBR seals on both sides SKU: SS-6003-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-35mm-width-10mm-with-blue-nbr-seals-on-both-sides-sku-ss-6003-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 35mm width 10mm with stainless steel shields on both sides SKU: SS-6003-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-35mm-width-10mm-with-stainless-steel-shields-on-both-sides-sku-ss-6003-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 32mm width 9mm with blue NBR seals on both sides SKU: SS-6002-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-32mm-width-9mm-with-blue-nbr-seals-on-both-sides-sku-ss-6002-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 32mm width 9mm with stainless steel shields on both sides SKU: SS-6002-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-32mm-width-9mm-with-stainless-steel-shields-on-both-sides-sku-ss-6002-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 28mm width 8mm with blue NBR seals on both sides SKU: SS-6001-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-28mm-width-8mm-with-blue-nbr-seals-on-both-sides-sku-ss-6001-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 28mm width 8mm with stainless steel shields on both sides SKU: SS-6001-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-28mm-width-8mm-with-stainless-steel-shields-on-both-sides-sku-ss-6001-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 26mm width 8mm with blue NBR seals on both sides SKU: SS-6000-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-26mm-width-8mm-with-blue-nbr-seals-on-both-sides-sku-ss-6000-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 26mm width 8mm with stainless steel shields on both sides SKU: SS-6000-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-26mm-width-8mm-with-stainless-steel-shields-on-both-sides-sku-ss-6000-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [Standard snap-on connectors with hose connector 13 SKU: 87041609](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-13-sku-87041609/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with hose connector 9-10 SKU: 87041607](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-9-10-sku-87041607/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with hose connector 9 SKU: 87041605](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-9-sku-87041605/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with hose connector 8 SKU: 87041603](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-8-sku-87041603/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with hose connector 6-7 SKU: 87041601](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-6-7-sku-87041601/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with external thread G 3/8 SKU: 87041338](https://maedler.in/product/standard-snap-on-connectors-with-external-thread-g-3-8-sku-87041338/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with external thread G 1/4 SKU: 87041314](https://maedler.in/product/standard-snap-on-connectors-with-external-thread-g-1-4-sku-87041314/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with external thread G 1/2 SKU: 87041312](https://maedler.in/product/standard-snap-on-connectors-with-external-thread-g-1-2-sku-87041312/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors G 3/8 SKU: 87041138](https://maedler.in/product/standard-snap-on-connectors-g-3-8-sku-87041138/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors G 1/4 SKU: 87041114](https://maedler.in/product/standard-snap-on-connectors-g-1-4-sku-87041114/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors G 1/2 SKU: 87041112](https://maedler.in/product/standard-snap-on-connectors-g-1-2-sku-87041112/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 13 SKU: 87040609](https://maedler.in/product/safety-connector-with-hose-connector-13-sku-87040609/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 9-10 SKU: 87040607](https://maedler.in/product/safety-connector-with-hose-connector-9-10-sku-87040607/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 9 SKU: 87040605](https://maedler.in/product/safety-connector-with-hose-connector-9-sku-87040605/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 8 SKU: 87040603](https://maedler.in/product/safety-connector-with-hose-connector-8-sku-87040603/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 6-7 SKU: 87040601](https://maedler.in/product/safety-connector-with-hose-connector-6-7-sku-87040601/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with external thread G 3/8 SKU: 87040338](https://maedler.in/product/safety-connector-with-external-thread-g-3-8-sku-87040338/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with external thread G 1/4 SKU: 87040314](https://maedler.in/product/safety-connector-with-external-thread-g-1-4-sku-87040314/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with external thread G 1/2 SKU: 87040312](https://maedler.in/product/safety-connector-with-external-thread-g-1-2-sku-87040312/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector G 3/8 SKU: 87040138](https://maedler.in/product/safety-connector-g-3-8-sku-87040138/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector G 1/4 SKU: 87040114](https://maedler.in/product/safety-connector-g-1-4-sku-87040114/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector G 1/2 SKU: 87040112](https://maedler.in/product/safety-connector-g-1-2-sku-87040112/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Hosetail with hose connector ø13 for quick coupling SKU: 87035300](https://maedler.in/product/hosetail-with-hose-connector-o13-for-quick-coupling-sku-87035300/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with hose connector ø10 for quick coupling SKU: 87035000](https://maedler.in/product/hosetail-with-hose-connector-o10-for-quick-coupling-sku-87035000/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with hose connector ø9 for quick coupling SKU: 87034900](https://maedler.in/product/hosetail-with-hose-connector-o9-for-quick-coupling-sku-87034900/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with hose connector ø8 for quick coupling SKU: 87034800](https://maedler.in/product/hosetail-with-hose-connector-o8-for-quick-coupling-sku-87034800/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with hose connector ø6 for quick coupling SKU: 87034600](https://maedler.in/product/hosetail-with-hose-connector-o6-for-quick-coupling-sku-87034600/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with external thread for quick coupling G 3/8 SKU: 87033238](https://maedler.in/product/hosetail-with-external-thread-for-quick-coupling-g-3-8-sku-87033238/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with external thread for quick coupling G 1/4 SKU: 87033214](https://maedler.in/product/hosetail-with-external-thread-for-quick-coupling-g-1-4-sku-87033214/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with external thread for quick coupling G 1/2 SKU: 87033212](https://maedler.in/product/hosetail-with-external-thread-for-quick-coupling-g-1-2-sku-87033212/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with internal thread for quick coupling G 3/8 SKU: 87033038](https://maedler.in/product/hosetail-with-internal-thread-for-quick-coupling-g-3-8-sku-87033038/): Material: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with internal thread for quick coupling G 1/4 SKU: 87033014](https://maedler.in/product/hosetail-with-internal-thread-for-quick-coupling-g-1-4-sku-87033014/): Material: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with internal thread for quick coupling G 1/2 SKU: 87033012](https://maedler.in/product/hosetail-with-internal-thread-for-quick-coupling-g-1-2-sku-87033012/): Material: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Nose nut mounting M22x1,5 for cylinder diameter 20/25mm SKU: 81002420](https://maedler.in/product/nose-nut-mounting-m22x15-for-cylinder-diameter-20-25mm-sku-81002420/): Materials: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Nose nut mounting M16x1,5 for cylinder diameter 12/16mm SKU: 81002412](https://maedler.in/product/nose-nut-mounting-m16x15-for-cylinder-diameter-12-16mm-sku-81002412/): Materials: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Nose nut mounting M12x1,25 for cylinder diameter 10mm SKU: 81002410](https://maedler.in/product/nose-nut-mounting-m12x125-for-cylinder-diameter-10mm-sku-81002410/): Materials: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Roller chain similar to 16 B-1 pitch 1"x17.02mm material stainless steel 1.4301 SKU: 10899000](https://maedler.in/product/roller-chain-similar-to-16-b-1-pitch-1x17-02mm-material-stainless-steel-1-4301-sku-10899000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 16 B-1 SKU: 10877000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-16-b-1-sku-10877000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Self-lubrication roller chain similar to 16 B-1 SLR pitch 1"x17.02mm SKU: 10877000](https://maedler.in/product/self-lubrication-roller-chain-similar-to-16-b-1-slr-pitch-1x17-02mm-sku-10877000/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel, sintered bronze bushes. Self-lubricating single-strand roller chain, dimensions and pre-stretching according to DIN. Waisted link plates. Chains with an uneven number of links are supplied with inner links at both ends. Only for horizontal usage (rollers not vertically). Connecting links must be ordered separately. Temperature range: -10° to +120°C. - [Anti corrosion roller chain Neptune 16 B-1 SKU: 10866000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-16-b-1-sku-10866000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 16 B-1 NP pitch 1"x17.02mm nickel-plated SKU: 10866000](https://maedler.in/product/roller-chain-similar-to-16-b-1-np-pitch-1x17-02mm-nickel-plated-sku-10866000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 16B-1 plastic with stainless steel SKU: 10856000](https://maedler.in/product/chain-ke-eco-similar-to-16b-1-plastic-with-stainless-steel-sku-10856000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain Titan 16 B-1 SKU: 10800000T](https://maedler.in/product/roller-chain-titan-16-b-1-sku-10800000t/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. Premium simplex roller chains, developed for low wear, even under dusty environment. Seamless bushes with lube grooves. Specially hard, low friction pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +60°C. Other temperatures are possible if special grease is used. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain DIN ISO 606 16 B-1-GLH pitch 1"x17,02mm with straight plates high version SKU: 10800000GLH](https://maedler.in/product/roller-chain-din-iso-606-16-b-1-glh-pitch-1x1702mm-with-straight-plates-high-version-sku-10800000glh/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain DIN ISO 606 16 B-1-GL pitch 1"x17,02mm with straight plates SKU: 10800000GL](https://maedler.in/product/roller-chain-din-iso-606-16-b-1-gl-pitch-1x1702mm-with-straight-plates-sku-10800000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 16 B-1 pitch 1"x17.02mm SKU: 10800000](https://maedler.in/product/roller-chain-16-b-1-pitch-1x17-02mm-sku-10800000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 12 B-1 pitch 3/4x7/16" SKU: 10799003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-12-b-1-pitch-3-4x7-16-sku-10799003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 12 B-1 SKU: 10799000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-12-b-1-sku-10799000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 12 B-1 pitch 3/4x7/16" material stainless steel 1.4301 with straight plates SKU: 10799000GL](https://maedler.in/product/roller-chain-similar-to-12-b-1-pitch-3-4x7-16-material-stainless-steel-1-4301-with-straight-plates-sku-10799000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Roller chain similar to 12 B-1 pitch 3/4x7/16" material stainless steel 1.4301 SKU: 10799000](https://maedler.in/product/roller-chain-similar-to-12-b-1-pitch-3-4x7-16-material-stainless-steel-1-4301-sku-10799000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 12 B-1 SKU: 10777000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-12-b-1-sku-10777000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Self-lubrication roller chain similar to 12 B-1 SLR pitch 3/4x7/16" SKU: 10777000](https://maedler.in/product/self-lubrication-roller-chain-similar-to-12-b-1-slr-pitch-3-4x7-16-sku-10777000/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel, sintered bronze bushes. Self-lubricating single-strand roller chain, dimensions and pre-stretching according to DIN. Waisted link plates. Chains with an uneven number of links are supplied with inner links at both ends. Only for horizontal usage (rollers not vertically). Connecting links must be ordered separately. Temperature range: -10° to +120°C. - [Anti corrosion roller chain Neptune 12 B-1 SKU: 10766000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-12-b-1-sku-10766000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 12 B-1 NP pitch 3/4x7/16" nickel-plated SKU: 10766000](https://maedler.in/product/roller-chain-similar-to-12-b-1-np-pitch-3-4x7-16-nickel-plated-sku-10766000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 12B-1 plastic with stainless steel SKU: 10756000](https://maedler.in/product/chain-ke-eco-similar-to-12b-1-plastic-with-stainless-steel-sku-10756000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Chain KE similar to 12B-1 plastic with stainless steel SKU: 10755000](https://maedler.in/product/chain-ke-similar-to-12b-1-plastic-with-stainless-steel-sku-10755000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain DIN ISO 606 12 B-1-GL pitch 3/4x7/16" with straight plates SKU: 10700000GL](https://maedler.in/product/roller-chain-din-iso-606-12-b-1-gl-pitch-3-4x7-16-with-straight-plates-sku-10700000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 12 B-1 pitch 3/4x7/16" SKU: 10700000](https://maedler.in/product/roller-chain-12-b-1-pitch-3-4x7-16-sku-10700000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 10 B-1 pitch 5/8x3/8" SKU: 10699003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-10-b-1-pitch-5-8x3-8-sku-10699003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 10 B-1 SKU: 10699000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-10-b-1-sku-10699000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 10 B-1 pitch 5/8x3/8" material stainless steel 1.4301 with straight plates SKU: 10699000GL](https://maedler.in/product/roller-chain-similar-to-10-b-1-pitch-5-8x3-8-material-stainless-steel-1-4301-with-straight-plates-sku-10699000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Roller chain similar to 10 B-1 pitch 5/8x3/8" material stainless steel 1.4301 SKU: 10699000](https://maedler.in/product/roller-chain-similar-to-10-b-1-pitch-5-8x3-8-material-stainless-steel-1-4301-sku-10699000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 10 B-1 SKU: 10677000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-10-b-1-sku-10677000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Self-lubrication roller chain similar to 10 B-1 SLR pitch 5/8x3/8" SKU: 10677000](https://maedler.in/product/self-lubrication-roller-chain-similar-to-10-b-1-slr-pitch-5-8x3-8-sku-10677000/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel, sintered bronze bushes. Self-lubricating single-strand roller chain, dimensions and pre-stretching according to DIN. Waisted link plates. Chains with an uneven number of links are supplied with inner links at both ends. Only for horizontal usage (rollers not vertically). Connecting links must be ordered separately. Temperature range: -10° to +120°C. - [Anti corrosion roller chain Neptune 10 B-1 SKU: 10666000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-10-b-1-sku-10666000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 10 B-1 NP pitch 5/8x3/8" nickel-plated SKU: 10666000](https://maedler.in/product/roller-chain-similar-to-10-b-1-np-pitch-5-8x3-8-nickel-plated-sku-10666000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 10B-1 plastic with stainless steel SKU: 10656000](https://maedler.in/product/chain-ke-eco-similar-to-10b-1-plastic-with-stainless-steel-sku-10656000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Chain KE similar to 10B-1 plastic with stainless steel SKU: 10655000](https://maedler.in/product/chain-ke-similar-to-10b-1-plastic-with-stainless-steel-sku-10655000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain DIN ISO 606 10 B-1-GL pitch 5/8x3/8" with straight plates SKU: 10600000GL](https://maedler.in/product/roller-chain-din-iso-606-10-b-1-gl-pitch-5-8x3-8-with-straight-plates-sku-10600000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 10 B-1 pitch 5/8x3/8" SKU: 10600000](https://maedler.in/product/roller-chain-10-b-1-pitch-5-8x3-8-sku-10600000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 08 B-1 pitch 1/2x5/16" SKU: 10599003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-08-b-1-pitch-1-2x5-16-sku-10599003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 08 B-1 SKU: 10599000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-08-b-1-sku-10599000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 08 B-1 pitch 1/2x5/16" material stainless steel 1.4301 with straight plates SKU: 10599000GL](https://maedler.in/product/roller-chain-similar-to-08-b-1-pitch-1-2x5-16-material-stainless-steel-1-4301-with-straight-plates-sku-10599000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Roller chain similar to 08 B-1 pitch 1/2x5/16" material stainless steel 1.4301 SKU: 10599000](https://maedler.in/product/roller-chain-similar-to-08-b-1-pitch-1-2x5-16-material-stainless-steel-1-4301-sku-10599000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 08 B-1 SKU: 10577000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-08-b-1-sku-10577000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Self-lubrication roller chain similar to 08 B-1 SLR pitch 1/2x5/16" SKU: 10577000](https://maedler.in/product/self-lubrication-roller-chain-similar-to-08-b-1-slr-pitch-1-2x5-16-sku-10577000/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel, sintered bronze bushes. Self-lubricating single-strand roller chain, dimensions and pre-stretching according to DIN. Waisted link plates. Chains with an uneven number of links are supplied with inner links at both ends. Only for horizontal usage (rollers not vertically). Connecting links must be ordered separately. Temperature range: -10° to +120°C. - [Anti corrosion roller chain Neptune 08 B-1 SKU: 10566000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-08-b-1-sku-10566000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 08 B-1 pitch 1/2 x 5/16"  nickel-plated. SKU: 10566000](https://maedler.in/product/roller-chain-similar-to-08-b-1-pitch-1-2-x-5-16-nickel-plated-sku-10566000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 08 B-1 plastic with stainless steel SKU: 10556000](https://maedler.in/product/chain-ke-eco-similar-to-08-b-1-plastic-with-stainless-steel-sku-10556000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Chain KE similar to 08 B-1 plastic with stainless steel SKU: 10555000](https://maedler.in/product/chain-ke-similar-to-08-b-1-plastic-with-stainless-steel-sku-10555000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain DIN ISO 606 08 B-1-GL pitch 1/2x5/16" with straight plates SKU: 10500000GL](https://maedler.in/product/roller-chain-din-iso-606-08-b-1-gl-pitch-1-2x5-16-with-straight-plates-sku-10500000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 08 B-1 pitch 1/2x5/16" SKU: 10500000](https://maedler.in/product/roller-chain-08-b-1-pitch-1-2x5-16-sku-10500000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain similar to 083 pitch 1/2x3/16" material stainless steel 1.4301 SKU: 10399000](https://maedler.in/product/roller-chain-similar-to-083-pitch-1-2x3-16-material-stainless-steel-1-4301-sku-10399000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Roller chain company norm pitch 1/2x3/16" V SKU: 10340000](https://maedler.in/product/roller-chain-company-norm-pitch-1-2x3-16-v-sku-10340000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain 083 pitch 1/2x3/16" SKU: 10300000](https://maedler.in/product/roller-chain-083-pitch-1-2x3-16-sku-10300000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain 081 pitch 1/2x1/8" SKU: 10200000](https://maedler.in/product/roller-chain-081-pitch-1-2x1-8-sku-10200000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 06 B-1 pitch 3/8x7/32" SKU: 10199003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-06-b-1-pitch-3-8x7-32-sku-10199003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 06 B-1 SKU: 10199000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-06-b-1-sku-10199000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 06 B-1 pitch 3/8x7/32" material stainless steel 1.4301 SKU: 10199000](https://maedler.in/product/roller-chain-similar-to-06-b-1-pitch-3-8x7-32-material-stainless-steel-1-4301-sku-10199000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 06 B-1 SKU: 10177000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-06-b-1-sku-10177000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Anti corrosion roller chain Neptune 06 B-1 SKU: 10166000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-06-b-1-sku-10166000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 06 B-1 NP pitch 3/8x7/32" nickel-plated SKU: 10166000](https://maedler.in/product/roller-chain-similar-to-06-b-1-np-pitch-3-8x7-32-nickel-plated-sku-10166000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 06B-1 plastic with stainless steel SKU: 10156000](https://maedler.in/product/chain-ke-eco-similar-to-06b-1-plastic-with-stainless-steel-sku-10156000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Chain KE similar to 06B-1 plastic with stainless steel SKU: 10155000](https://maedler.in/product/chain-ke-similar-to-06b-1-plastic-with-stainless-steel-sku-10155000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain 06 B-1 pitch 3/8x7/32" SKU: 10100000](https://maedler.in/product/roller-chain-06-b-1-pitch-3-8x7-32-sku-10100000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain 05 B-1 pitch 8mm material stainless steel 1.4301 SKU: 10099800](https://maedler.in/product/roller-chain-05-b-1-pitch-8mm-material-stainless-steel-1-4301-sku-10099800/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Roller chain no. 04 pitch 6mm material stainless steel 1.4301 SKU: 10099600](https://maedler.in/product/roller-chain-no-04-pitch-6mm-material-stainless-steel-1-4301-sku-10099600/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Roller chain 05 B-1 pitch 8mm SKU: 10080000](https://maedler.in/product/roller-chain-05-b-1-pitch-8mm-sku-10080000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain similar to 05 B-1 NP pitch 8mm nickel-plated SKU: 10066800](https://maedler.in/product/roller-chain-similar-to-05-b-1-np-pitch-8mm-nickel-plated-sku-10066800/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain no. 04 pitch 6mm SKU: 10060000](https://maedler.in/product/roller-chain-no-04-pitch-6mm-sku-10060000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain no. 03 pitch 5mm SKU: 10030000](https://maedler.in/product/roller-chain-no-03-pitch-5mm-sku-10030000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain company standard pitch 4mm SKU: 10000000](https://maedler.in/product/chain-company-standard-pitch-4mm-sku-10000000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø19mm width 6mm with blue NBR seals on both sides SKU: SS-698-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o19mm-width-6mm-with-blue-nbr-seals-on-both-sides-sku-ss-698-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø 19mm width 6mm with stainless steel shields on both sides SKU: SS-698-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o-19mm-width-6mm-with-stainless-steel-shields-on-both-sides-sku-ss-698-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø15mm width 5mm with blue NBR seals on both sides SKU: SS-696-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o15mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-696-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø 15mm width 5mm with stainless steel shields on both sides SKU: SS-696-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o-15mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-696-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø16mm width 5mm with blue NBR seals on both sides SKU: SS-688-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o16mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-688-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø 16mm width 5mm with stainless steel shields on both sides SKU: SS-688-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o-16mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-688-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø14mm width 5mm with blue NBR seals on both sides SKU: SS-687-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o14mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-687-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø 14mm width 5mm with stainless steel shields on both sides SKU: SS-687-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o-14mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-687-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø13mm width 5mm with blue NBR seals on both sides SKU: SS-686-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o13mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-686-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø 13mm width 5mm with stainless steel shields on both sides SKU: SS-686-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o-13mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-686-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø11mm width 5mm with blue NBR seals on both sides SKU: SS-685-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o11mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-685-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø 11mm width 5mm with stainless steel shields on both sides SKU: SS-685-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o-11mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-685-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 62mm width 17mm with blue NBR seals on both sides SKU: SS-6305-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-62mm-width-17mm-with-blue-nbr-seals-on-both-sides-sku-ss-6305-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 52mm width 15mm with blue NBR seals on both sides SKU: SS-6304-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-52mm-width-15mm-with-blue-nbr-seals-on-both-sides-sku-ss-6304-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 37mm width 12mm with blue NBR seals on both sides SKU: SS-6301-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-37mm-width-12mm-with-blue-nbr-seals-on-both-sides-sku-ss-6301-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 35mm width 11mm with blue NBR seals on both sides SKU: SS-6300-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-35mm-width-11mm-with-blue-nbr-seals-on-both-sides-sku-ss-6300-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 9mm outer Ø26mm width 8mm with blue NBR seals on both sides SKU: SS-629-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-9mm-outer-o26mm-width-8mm-with-blue-nbr-seals-on-both-sides-sku-ss-629-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 9mm outer Ø 26mm width 8mm with stainless steel shields on both sides SKU: SS-629-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-9mm-outer-o-26mm-width-8mm-with-stainless-steel-shields-on-both-sides-sku-ss-629-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø22mm width 7mm with blue NBR seals on both sides SKU: SS-627-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o22mm-width-7mm-with-blue-nbr-seals-on-both-sides-sku-ss-627-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø 22mm width 7mm with stainless steel shields on both sides SKU: SS-627-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o-22mm-width-7mm-with-stainless-steel-shields-on-both-sides-sku-ss-627-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø19mm width 6mm with blue NBR seals on both sides SKU: SS-626-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o19mm-width-6mm-with-blue-nbr-seals-on-both-sides-sku-ss-626-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø 19mm width 6mm with stainless steel shields on both sides SKU: SS-626-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o-19mm-width-6mm-with-stainless-steel-shields-on-both-sides-sku-ss-626-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø16mm width 5mm with blue NBR seals on both sides SKU: SS-625-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o16mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-625-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø 16mm width 5mm with stainless steel shields on both sides SKU: SS-625-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o-16mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-625-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 4mm outer Ø13mm width 5mm with blue NBR seals on both sides SKU: SS-624-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-4mm-outer-o13mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-624-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 4mm outer Ø 13mm width 5mm with stainless steel shields on both sides SKU: SS-624-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-4mm-outer-o-13mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-624-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 3mm outer Ø10mm width 4mm with blue NBR seals on both sides SKU: SS-623-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-3mm-outer-o10mm-width-4mm-with-blue-nbr-seals-on-both-sides-sku-ss-623-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 3mm outer Ø 10mm width 4mm with stainless steel shields on both sides SKU: SS-623-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-3mm-outer-o-10mm-width-4mm-with-stainless-steel-shields-on-both-sides-sku-ss-623-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 45mm outer Ø 85mm width 19mm with blue NBR seals on both sides SKU: SS-6209-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-45mm-outer-o-85mm-width-19mm-with-blue-nbr-seals-on-both-sides-sku-ss-6209-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 40mm outer Ø 80mm width 18mm with blue NBR seals on both sides SKU: SS-6208-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-40mm-outer-o-80mm-width-18mm-with-blue-nbr-seals-on-both-sides-sku-ss-6208-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 72mm width 17mm with blue NBR seals on both sides SKU: SS-6207-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-72mm-width-17mm-with-blue-nbr-seals-on-both-sides-sku-ss-6207-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 62mm width 16mm with blue NBR seals on both sides SKU: SS-6206-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-62mm-width-16mm-with-blue-nbr-seals-on-both-sides-sku-ss-6206-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 62mm width 16mm with stainless steel shields on both sides SKU: SS-6206-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-62mm-width-16mm-with-stainless-steel-shields-on-both-sides-sku-ss-6206-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 52mm width 15mm with blue NBR seals on both sides SKU: SS-6205-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-52mm-width-15mm-with-blue-nbr-seals-on-both-sides-sku-ss-6205-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [WD-40 SPECIALIST Cutting Oil 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070147](https://maedler.in/product/wd-40-specialist-cutting-oil-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070147/): The special spray improves machining processes for all metals. Spray head can be adjusted for area or spot spraying.• Contains Extreme Pressure and Anti Wear additives.• Extends tool life.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H362 May cause harm to breast-fed children.H400 Very toxic to aquatic life.H410 Very toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Silicone Lubricant 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070146](https://maedler.in/product/wd-40-specialist-silicone-lubricant-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070146/): The special spray with excellent lubricating properties is water-repellent and protects against moisture. Spray head (only 400 ml) can be adjusted for area or spot spraying.• formulated for improved high pressure performance.• prevents rust and corrosion.• avoids jamming and blockages.• colourless.• temperature range: -35°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 SPECIALIST Silicone Lubricant 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070145](https://maedler.in/product/wd-40-specialist-silicone-lubricant-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070145/): The special spray with excellent lubricating properties is water-repellent and protects against moisture. Spray head (only 400 ml) can be adjusted for area or spot spraying.• formulated for improved high pressure performance.• prevents rust and corrosion.• avoids jamming and blockages.• colourless.• temperature range: -35°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 SPECIALIST White Lithium Grease 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070144](https://maedler.in/product/wd-40-specialist-white-lithium-grease-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070144/): Special spray for long-lasting lubrication without dripping or running off. Spray head can be adjusted for area or spot spraying.• for use on metal to metal connections.• water and heat resistant lubricant.• ideal for load bearing application.• temperature range: -25°C to +130°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Dry PTFE Lubricant 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070143](https://maedler.in/product/wd-40-specialist-dry-ptfe-lubricant-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070143/): Special spray, for improved lubricating and protective properties. Dual action Smart Straw® applicator for wide area and precision spray applications.• reduces friction and wear.• ideal to be used on metals, plastic and glass.• leaves a clear, dry film.• advanced formulation works as an effective mould release agent.• Temperature range: -45°C to +260°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST PTFE Lubricant 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070142](https://maedler.in/product/wd-40-specialist-ptfe-lubricant-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070142/): The special spray extends the life expectancy of tools and equipment. Spray head can be adjusted for area or spot spraying.• reduces friction and wear.• for use on metal, glass, vinyl, rubber and plastic.• long-lasting formula with excellent lubricating properties.• temperature range: -20°C to +100°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Penetrant 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070141](https://maedler.in/product/wd-40-specialist-penetrant-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070141/): The special spray quickly separates rusted and corroded parts. Spray head (only 400 ml) can be adjusted for area or spot spraying.• quickly penetrates rusted and corroded parts.• highly water resistant.• very low surface tension to penetrate rust.• temperature range: -20°C to +90°CDangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Penetrant 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070140](https://maedler.in/product/wd-40-specialist-penetrant-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070140/): The special spray quickly separates rusted and corroded parts. Spray head (only 400 ml) can be adjusted for area or spot spraying.• quickly penetrates rusted and corroded parts.• highly water resistant.• very low surface tension to penetrate rust.• temperature range: -20°C to +90°CDangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 Multi-Use Product Spray applicator empty SKU: 14070130](https://maedler.in/product/wd-40-multi-use-product-spray-applicator-empty-sku-14070130/): The WD-40 Hand Sprayer is designed for use with WD-40 Multi-Use products from 5 litre and 25 litre canisters. With an adjustable spray nozzle, it is ideal to spray over a large area. Its ergonomic spray head and long handle and 600ml capacity make it easy to use. The spray applicator is sold empty. - [WD-40 Multi-Use Product 5 litres container inclusive spray applicator (Actual safety data sheet on the internet in the section Downloads) SKU: 14070124](https://maedler.in/product/wd-40-multi-use-product-5-litres-container-inclusive-spray-applicator-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070124/): Multi-purpose oil with multiple application possibilities in a 5 litre plastic canister, with an empty hand sprayer.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH226 Flammable liquid and vapour.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Multi-Use Product 5 litres container (Actual safety data sheet on the internet in the section Downloads) SKU: 14070122](https://maedler.in/product/wd-40-multi-use-product-5-litres-container-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070122/): Multi-purpose oil with multiple application possibilities in a 5 litre plastic canister.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH226 Flammable liquid and vapour.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Multi-Use Product Classic 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070121](https://maedler.in/product/wd-40-multi-use-product-classic-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070121/): Multipurpose oil spray with multiple application possibilities.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Multi-Use Product Classic 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070120](https://maedler.in/product/wd-40-multi-use-product-classic-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070120/): Multipurpose oil spray with multiple application possibilities.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Flexible 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070118](https://maedler.in/product/wd-40-flexible-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070118/): Multipurpose oil spray with multiple application possibilities. Spray tube made of metal, which can be bent individually.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Multi-Use Product Smart Straw 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070115](https://maedler.in/product/wd-40-multi-use-product-smart-straw-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070115/): Multipurpose oil spray with multiple application possibilities. 5 important products in one: - displacement of moisture. - penetrating oil. - corrosion protection. - cleaner. - lubricant. Silicone-free. With SmartStraw-Double-Sprayer: Simply flip it up for precision stream, or flip it down again for regular spray action. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H304 May be fatal if swallowed and enters airways. H336 May cause drowsiness or dizziness. - [CRC Chain Lube 33236-AA with NSF H1 registration food processing safe SKU: 14070109](https://maedler.in/product/crc-chain-lube-33236-aa-with-nsf-h1-registration-food-processing-safe-sku-14070109/): Long lasting, food grade lubricant for chains, cables, joints, gears etc.. Also for use at food processing machines where incidental food contact may occur. • NSF registration for use in the food industry (category H1 - NSF-reg.-Nr. 017046). • long lasting lubrication film. • based on synthetic oil and PTFE. • temperature resistance: -15°C to +175°C. • 2-way-sprayer (precision or wide straw). Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. - [MAEDLER Stainless steel repair spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070107](https://maedler.in/product/maedler-stainless-steel-repair-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070107/): Heavy-duty, fast drying spray for the repair of stainles steel surfaces and also for decoration. - to touch up damaged stainless steel surfaces. - abrasion resistant. - reliable protection against corrosion even in extreme weather conditions. - effective surface coating for all metal parts, most plastics, wood, stone, cardboard, glass, etc - short-term heat resistant up to +250°C. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [MAEDLER Aluminium spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070106](https://maedler.in/product/maedler-aluminium-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070106/): Heavy-duty, fast drying spray for the repair of aluminium surfaces and also for decoration. - abrasion resistant. - protection against corrosion by aluminium pigments and resin. - fast drying. - heat resistant to +80ºC. - silicone-free. Danger H222-H229 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H304 May be fatal if swallowed and enters airways. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [MAEDLER Long-term corrosion protection spray 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070104](https://maedler.in/product/maedler-long-term-corrosion-protection-spray-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070104/): Reliable long term protection against corrosion and oxidation for all steel and metal parts. - The strong-bonding, ceraceous protective film is resistant against water and salt water. - long-term conservation even in a chemically aggressive environment. - highly capable of creep, displaces moisture bonds even to vertical surfaces. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. - [MAEDLER Zinc repair spray 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070103](https://maedler.in/product/maedler-zinc-repair-spray-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070103/): Heavy-duty, fast drying spray for the repair of zinc-plated surfaces. - colour: light silver, glossy finish similar to zinc. - optically almost indistinguishable from hot-dip zinc coating. - can be used to repair the zinc surface after welding. - good protection against corrosion: Zinc-aluminium pigments and resins protect the coated steel. - heat resistant to +200ºC. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [MAEDLER PTFE spray 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070102](https://maedler.in/product/maedler-ptfe-spray-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070102/): Hard-drying permanent separating, lubrication and anti-blocking agent. The substance can be removed using a suitable solvent. - free of grease, dry and clean. - water, dust and dirt repellent. - resistant against many chemicals, water, oils etc. - temperature resistant from -20°C to +200°C. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. EUH066 Repeated contact can lead to brittle or cracked skin. - [MAEDLER Spray cleaner 500 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070101](https://maedler.in/product/maedler-spray-cleaner-500-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070101/): Degreaser, mould cleaner, brake cleaner. - degreases and cleans metal, glass, etc. - resolves resinified residues. - removes adhesive residues. - cleans brake and clutch parts. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. - [MAEDLER Chain spray 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070100](https://maedler.in/product/maedler-chain-spray-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070100/): Special adhesive lubricant for the maintenance of heavy-duty, fast-running drive and timing chains, plain bearings, open gear boxes etc.. - corrosion protection. - strong bonding power. - highly capable of creep. - displaces moisture. - reducing noise. - protection against wear. - temperature resistant from -5°C to +140°C. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [Belt tensioner SPANN-BOY® TS Roller-Ø 65mm Roller width 40mm SKU: 14041803](https://maedler.in/product/belt-tensioner-spann-boy-ts-roller-o-65mm-roller-width-40mm-sku-14041803/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These very low, ready-to-install belt tensioners enable noise reduction and wear reduction at belts.• With two springs of different strengths that can be activated individually or together. This allows three clamping forces to be set.• Usable tensioning way 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:The SPANN-BOY® TS has two different springs: one with low force and one with high force. These springs gan get activated separately or together.So it is possible to adjust three different tensioning forces:Only the low-force spring activated: 65 - 33 N.Only the high-force spring activated: 125 - 63 N.Both springs together activated: 190 - 96 N. - [Belt tensioner SPANN-BOY® TS Roller-Ø 65mm Roller width 30mm SKU: 14041802](https://maedler.in/product/belt-tensioner-spann-boy-ts-roller-o-65mm-roller-width-30mm-sku-14041802/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These very low, ready-to-install belt tensioners enable noise reduction and wear reduction at belts.• With two springs of different strengths that can be activated individually or together. This allows three clamping forces to be set.• Usable tensioning way 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:The SPANN-BOY® TS has two different springs: one with low force and one with high force. These springs gan get activated separately or together.So it is possible to adjust three different tensioning forces:Only the low-force spring activated: 65 - 33 N.Only the high-force spring activated: 125 - 63 N.Both springs together activated: 190 - 96 N. - [Belt tensioner SPANN-BOY® TS Roller-Ø 65mm Roller width 20mm SKU: 14041801](https://maedler.in/product/belt-tensioner-spann-boy-ts-roller-o-65mm-roller-width-20mm-sku-14041801/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These very low, ready-to-install belt tensioners enable noise reduction and wear reduction at belts.• With two springs of different strengths that can be activated individually or together. This allows three clamping forces to be set.• Usable tensioning way 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:The SPANN-BOY® TS has two different springs: one with low force and one with high force. These springs gan get activated separately or together.So it is possible to adjust three different tensioning forces:Only the low-force spring activated: 65 - 33 N.Only the high-force spring activated: 125 - 63 N.Both springs together activated: 190 - 96 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S high tensioning force roller-Ø 65mm (cylindrical) roller width 40mm SKU: 14041423](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-40mm-sku-14041423/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S high tensioning force roller-Ø 65mm (cylindrical) roller width 30mm SKU: 14041422](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-30mm-sku-14041422/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S high tensioning force roller-Ø 65mm (cylindrical) roller width 20mm SKU: 14041421](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-20mm-sku-14041421/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L high tensioning force roller-Ø 65mm (cylindrical) roller width 40mm SKU: 14041413](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-40mm-sku-14041413/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L high tensioning force roller-Ø 65mm (cylindrical) roller width 30mm SKU: 14041412](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-30mm-sku-14041412/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L high tensioning force roller-Ø 65mm (cylindrical) roller width 20mm SKU: 14041411](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-20mm-sku-14041411/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-0 high tensioning force roller-Ø 65mm (cylindrical) roller width 53mm SKU: 14041404](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-0-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-53mm-sku-14041404/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C. * Tensioning way.** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S low tensioning force roller-Ø 65mm (cylindrical) roller width 40mm SKU: 14041323](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-40mm-sku-14041323/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S low tensioning force roller-Ø 65mm (cylindrical) roller width 30mm SKU: 14041322](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-30mm-sku-14041322/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S low tensioning force roller-Ø 65mm (cylindrical) roller width 20mm SKU: 14041321](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-20mm-sku-14041321/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L low tensioning force roller-Ø 65mm (cylindrical) roller width 40mm SKU: 14041313](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-40mm-sku-14041313/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L low tensioning force roller-Ø 65mm (cylindrical) roller width 30mm SKU: 14041312](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-30mm-sku-14041312/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L low tensioning force roller-Ø 65mm (cylindrical) roller width 20mm SKU: 14041311](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-20mm-sku-14041311/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-0 low tensioning force roller-Ø 65mm (cylindrical) roller width 53mm SKU: 14041304](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-0-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-53mm-sku-14041304/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C. * Tensioning way.** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 0 high tensioning force roller-Ø 55mm (cylindrical) roller width 40mm SKU: 14041203](https://maedler.in/product/belt-tensioner-spann-box-size-0-high-tensioning-force-roller-o-55mm-cylindrical-roller-width-40mm-sku-14041203/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 high tensioning force roller-Ø 55mm (cylindrical) roller width 30mm SKU: 14041202](https://maedler.in/product/belt-tensioner-spann-box-size-0-high-tensioning-force-roller-o-55mm-cylindrical-roller-width-30mm-sku-14041202/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 high tensioning force roller-Ø 55mm (cylindrical) roller width 20mm SKU: 14041201](https://maedler.in/product/belt-tensioner-spann-box-size-0-high-tensioning-force-roller-o-55mm-cylindrical-roller-width-20mm-sku-14041201/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 low tensioning force roller-Ø 55mm (cylindrical) roller width 40mm SKU: 14041103](https://maedler.in/product/belt-tensioner-spann-box-size-0-low-tensioning-force-roller-o-55mm-cylindrical-roller-width-40mm-sku-14041103/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 low tensioning force roller-Ø 55mm (cylindrical) roller width 30mm SKU: 14041102](https://maedler.in/product/belt-tensioner-spann-box-size-0-low-tensioning-force-roller-o-55mm-cylindrical-roller-width-30mm-sku-14041102/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 low tensioning force roller-Ø 55mm (cylindrical) roller width 20mm SKU: 14041101](https://maedler.in/product/belt-tensioner-spann-box-size-0-low-tensioning-force-roller-o-55mm-cylindrical-roller-width-20mm-sku-14041101/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Triple-strand roller chain 16 B-3 pitch 1"x17.02mm SKU: 13800000](https://maedler.in/product/triple-strand-roller-chain-16-b-3-pitch-1x17-02mm-sku-13800000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Triple-strand roller chain DIN ISO 606 12 B-3 pitch 3/4x7/16" SKU: 13700000](https://maedler.in/product/triple-strand-roller-chain-din-iso-606-12-b-3-pitch-3-4x7-16-sku-13700000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Triple-strand roller chain 10 B-3 pitch 5/8x3/8" SKU: 13600000](https://maedler.in/product/triple-strand-roller-chain-10-b-3-pitch-5-8x3-8-sku-13600000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Triple-strand roller chain 08 B-3 pitch 1/2x5/16" SKU: 13500000](https://maedler.in/product/triple-strand-roller-chain-08-b-3-pitch-1-2x5-16-sku-13500000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Triple-strand roller chain 06 B-3 pitch 3/8x7/32" SKU: 13100000](https://maedler.in/product/triple-strand-roller-chain-06-b-3-pitch-3-8x7-32-sku-13100000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Self-lubrication double-strand roller chain Lamba 24 B-2 SKU: 12977500L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-24-b-2-sku-12977500l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Self-lubrication double-strand roller chain Lamba 20 B-2 SKU: 12977000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-20-b-2-sku-12977000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 20 B-2 SKU: 12966000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-20-b-2-sku-12966000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain 24 B-2 pitch 1 1/2x1" SKU: 12950000](https://maedler.in/product/double-strand-roller-chain-24-b-2-pitch-1-1-2x1-sku-12950000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain DIN ISO 606 20 B-2-GL pitch 1 1/4x3/4" with straight plates SKU: 12900000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-20-b-2-gl-pitch-1-1-4x3-4-with-straight-plates-sku-12900000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain DIN ISO 606 20 B-2 pitch 1 1/4x3/4" SKU: 12900000](https://maedler.in/product/double-strand-roller-chain-din-iso-606-20-b-2-pitch-1-1-4x3-4-sku-12900000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 16 B-2 pitch 1"x17.02mm material stainless steel 1.4301 SKU: 12899000](https://maedler.in/product/double-strand-roller-chain-16-b-2-pitch-1x17-02mm-material-stainless-steel-1-4301-sku-12899000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 16 B-2 SKU: 12877000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-16-b-2-sku-12877000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 16 B-2 SKU: 12866000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-16-b-2-sku-12866000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain DIN ISO 606 16 B-2-GLH pitch 1"x17,02mm with straight plates high version SKU: 12800000GLH](https://maedler.in/product/double-strand-roller-chain-din-iso-606-16-b-2-glh-pitch-1x1702mm-with-straight-plates-high-version-sku-12800000glh/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain DIN ISO 606 16 B-2-GL pitch 1"x17,02mm with straight plates SKU: 12800000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-16-b-2-gl-pitch-1x1702mm-with-straight-plates-sku-12800000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain 16 B-2 pitch 1"x17.02mm SKU: 12800000](https://maedler.in/product/double-strand-roller-chain-16-b-2-pitch-1x17-02mm-sku-12800000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 12 B-2 pitch 3/4x7/16" material stainless steel 1.4301 SKU: 12799000](https://maedler.in/product/double-strand-roller-chain-12-b-2-pitch-3-4x7-16-material-stainless-steel-1-4301-sku-12799000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 12 B-2 SKU: 12777000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-12-b-2-sku-12777000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 12 B-2 SKU: 12766000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-12-b-2-sku-12766000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain DIN ISO 606 12 B-2-GL pitch 3/4x7/16" with straight plates SKU: 12700000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-12-b-2-gl-pitch-3-4x7-16-with-straight-plates-sku-12700000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain 12 B-2 pitch 3/4x7/16" SKU: 12700000](https://maedler.in/product/double-strand-roller-chain-12-b-2-pitch-3-4x7-16-sku-12700000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain DIN ISO 606 10 B-2 pitch 5/8x3/8" material stainless steel 1.4301 SKU: 12699000](https://maedler.in/product/double-strand-roller-chain-din-iso-606-10-b-2-pitch-5-8x3-8-material-stainless-steel-1-4301-sku-12699000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 10 B-2 SKU: 12677000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-10-b-2-sku-12677000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 10 B-2 SKU: 12666000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-10-b-2-sku-12666000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain DIN ISO 606 10 B-2-GL pitch 5/8x3/8" with straight plates SKU: 12600000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-10-b-2-gl-pitch-5-8x3-8-with-straight-plates-sku-12600000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain DIN ISO 606 10 B-2 pitch 5/8x3/8" SKU: 12600000](https://maedler.in/product/double-strand-roller-chain-din-iso-606-10-b-2-pitch-5-8x3-8-sku-12600000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 08 B-2 pitch 1/2x5/16" material stainless steel 1.4301 SKU: 12599000](https://maedler.in/product/double-strand-roller-chain-08-b-2-pitch-1-2x5-16-material-stainless-steel-1-4301-sku-12599000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 08 B-2 SKU: 12577000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-08-b-2-sku-12577000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 08 B-2 SKU: 12566000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-08-b-2-sku-12566000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain DIN ISO 606 08 B-2-GL pitch 1/2x5/16" with straight plates SKU: 12500000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-08-b-2-gl-pitch-1-2x5-16-with-straight-plates-sku-12500000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain 08 B-2 pitch 1/2x5/16" SKU: 12500000](https://maedler.in/product/double-strand-roller-chain-08-b-2-pitch-1-2x5-16-sku-12500000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 06 B-2 pitch 3/8x7/32" material stainless steel 1.4301 SKU: 12199000](https://maedler.in/product/double-strand-roller-chain-06-b-2-pitch-3-8x7-32-material-stainless-steel-1-4301-sku-12199000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 06 B-2 SKU: 12177000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-06-b-2-sku-12177000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 06 B-2 SKU: 12166000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-06-b-2-sku-12166000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain 06 B-2 pitch 3/8x7/32" SKU: 12100000](https://maedler.in/product/double-strand-roller-chain-06-b-2-pitch-3-8x7-32-sku-12100000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 05 B-2 pitch 8mm material stainless steel 1.4301 SKU: 12099000](https://maedler.in/product/double-strand-roller-chain-05-b-2-pitch-8mm-material-stainless-steel-1-4301-sku-12099000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Double-strand roller chain 05 B-2 pitch 8mm SKU: 12000000](https://maedler.in/product/double-strand-roller-chain-05-b-2-pitch-8mm-sku-12000000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Self-lubrication roller chain Lambda 24 B-1 SKU: 11077000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-24-b-1-sku-11077000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Anti corrosion roller chain Neptune 24 B-1 SKU: 11066000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-24-b-1-sku-11066000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 24 B-1 NP pitch 1 1/2x1" nickel-plated SKU: 11066000](https://maedler.in/product/roller-chain-similar-to-24-b-1-np-pitch-1-1-2x1-nickel-plated-sku-11066000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain Titan 24 B-1 SKU: 11000000T](https://maedler.in/product/roller-chain-titan-24-b-1-sku-11000000t/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. Premium simplex roller chains, developed for low wear, even under dusty environment. Seamless bushes with lube grooves. Specially hard, low friction pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +60°C. Other temperatures are possible if special grease is used. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain 24 B-1 pitch 1 1/2x1" SKU: 11000000](https://maedler.in/product/roller-chain-24-b-1-pitch-1-1-2x1-sku-11000000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain similar to 20 B-1 pitch 1 1/4x3/4" material stainless steel 1.4301 with straight plates SKU: 10999000GL](https://maedler.in/product/roller-chain-similar-to-20-b-1-pitch-1-1-4x3-4-material-stainless-steel-1-4301-with-straight-plates-sku-10999000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Roller chain 20 B-1 pitch 1 1/4x3/4" material stainless steel 1.4301 SKU: 10999000](https://maedler.in/product/roller-chain-20-b-1-pitch-1-1-4x3-4-material-stainless-steel-1-4301-sku-10999000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 20 B-1 SKU: 10977000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-20-b-1-sku-10977000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Anti corrosion roller chain Neptune 20 B-1 SKU: 10966000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-20-b-1-sku-10966000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 20 B-1 NP pitch 1 1/4x3/4" nickel-plated SKU: 10966000](https://maedler.in/product/roller-chain-similar-to-20-b-1-np-pitch-1-1-4x3-4-nickel-plated-sku-10966000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain Titan 20 B-1 SKU: 10900000T](https://maedler.in/product/roller-chain-titan-20-b-1-sku-10900000t/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. Premium simplex roller chains, developed for low wear, even under dusty environment. Seamless bushes with lube grooves. Specially hard, low friction pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +60°C. Other temperatures are possible if special grease is used. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain DIN ISO 606 20 B-1-GL pitch 1 1/4x3/4" with straight plates SKU: 10900000GL](https://maedler.in/product/roller-chain-din-iso-606-20-b-1-gl-pitch-1-1-4x3-4-with-straight-plates-sku-10900000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 20 B-1 pitch 1 1/4x3/4" SKU: 10900000](https://maedler.in/product/roller-chain-20-b-1-pitch-1-1-4x3-4-sku-10900000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 16 B-1 pitch 1"x17.02mm SKU: 10899003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-16-b-1-pitch-1x17-02mm-sku-10899003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 16 B-1 SKU: 10899000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-16-b-1-sku-10899000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 16 B-1 pitch 1"x17.02mm material stainless steel 1.4301 with straight plates SKU: 10899000GL](https://maedler.in/product/roller-chain-similar-to-16-b-1-pitch-1x17-02mm-material-stainless-steel-1-4301-with-straight-plates-sku-10899000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Plastic guide rail 40 x 20 x 1000mm for roller chain 16B-1 SKU: 14100801](https://maedler.in/product/plastic-guide-rail-40-x-20-x-1000mm-for-roller-chain-16b-1-sku-14100801/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 15 x 1000mm for roller chain 16B-1 SKU: 14100800](https://maedler.in/product/plastic-guide-rail-40-x-15-x-1000mm-for-roller-chain-16b-1-sku-14100800/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 20 x 1000mm for roller chain 12B-1 SKU: 14100701](https://maedler.in/product/plastic-guide-rail-25-x-20-x-1000mm-for-roller-chain-12b-1-sku-14100701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 15 x 1000mm for roller chain 12B-1 SKU: 14100700](https://maedler.in/product/plastic-guide-rail-25-x-15-x-1000mm-for-roller-chain-12b-1-sku-14100700/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 20 x 1000mm for roller chain 10B-1 SKU: 14100601](https://maedler.in/product/plastic-guide-rail-20-x-20-x-1000mm-for-roller-chain-10b-1-sku-14100601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 15 x 1000mm for roller chain 10B-1 SKU: 14100600](https://maedler.in/product/plastic-guide-rail-20-x-15-x-1000mm-for-roller-chain-10b-1-sku-14100600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 20 x 1000mm for roller chain 08B-1 SKU: 14100502](https://maedler.in/product/plastic-guide-rail-20-x-20-x-1000mm-for-roller-chain-08b-1-sku-14100502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 15 x 1000mm for roller chain 08B-1 SKU: 14100501](https://maedler.in/product/plastic-guide-rail-20-x-15-x-1000mm-for-roller-chain-08b-1-sku-14100501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 10 x 1000mm for roller chain 08B-1 SKU: 14100500](https://maedler.in/product/plastic-guide-rail-20-x-10-x-1000mm-for-roller-chain-08b-1-sku-14100500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 15 x 10 x 1000mm for roller chain 083-1 SKU: 14100300](https://maedler.in/product/plastic-guide-rail-15-x-10-x-1000mm-for-roller-chain-083-1-sku-14100300/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 15 x 10 x 1000mm for roller chain 06B-1 SKU: 14100100](https://maedler.in/product/plastic-guide-rail-15-x-10-x-1000mm-for-roller-chain-06b-1-sku-14100100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Bolt-on hub for plate wheel hub diameter 160mm material steel C45 SKU: 14090188](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-160mm-material-steel-c45-sku-14090188/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 140mm material steel C45 SKU: 14090187](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-140mm-material-steel-c45-sku-14090187/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 100mm material steel C45 SKU: 14090186](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-100mm-material-steel-c45-sku-14090186/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 80mm material steel C45 SKU: 14090185](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-80mm-material-steel-c45-sku-14090185/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 70mm material steel C45 SKU: 14090184](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-70mm-material-steel-c45-sku-14090184/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 60mm material steel C45 SKU: 14090183](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-60mm-material-steel-c45-sku-14090183/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 50mm material steel C45 SKU: 14090182](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-50mm-material-steel-c45-sku-14090182/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 40mm material steel C45 SKU: 14090181](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-40mm-material-steel-c45-sku-14090181/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 30mm material steel C45 SKU: 14090180](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-30mm-material-steel-c45-sku-14090180/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [adaptor for taper bush 4040 outside diameter 185mm material cast iron SKU: 14090173](https://maedler.in/product/adaptor-for-taper-bush-4040-outside-diameter-185mm-material-cast-iron-sku-14090173/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 3535 outside diameter 160mm material cast iron SKU: 14090171](https://maedler.in/product/adaptor-for-taper-bush-3535-outside-diameter-160mm-material-cast-iron-sku-14090171/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 3030 outside diameter 130mm material cast iron SKU: 14090169](https://maedler.in/product/adaptor-for-taper-bush-3030-outside-diameter-130mm-material-cast-iron-sku-14090169/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 2517 outside diameter 105mm material cast iron SKU: 14090167](https://maedler.in/product/adaptor-for-taper-bush-2517-outside-diameter-105mm-material-cast-iron-sku-14090167/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 1615 outside diameter 70mm material cast iron SKU: 14090165](https://maedler.in/product/adaptor-for-taper-bush-1615-outside-diameter-70mm-material-cast-iron-sku-14090165/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 1610 outside diameter 70mm material cast iron SKU: 14090164](https://maedler.in/product/adaptor-for-taper-bush-1610-outside-diameter-70mm-material-cast-iron-sku-14090164/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 1210 outside diameter 60mm material cast iron SKU: 14090162](https://maedler.in/product/adaptor-for-taper-bush-1210-outside-diameter-60mm-material-cast-iron-sku-14090162/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 1008 outside diameter 45mm material cast iron SKU: 14090160](https://maedler.in/product/adaptor-for-taper-bush-1008-outside-diameter-45mm-material-cast-iron-sku-14090160/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 3020 outside diameter 485mm material steel SKU: 14090147](https://maedler.in/product/bolt-on-hub-for-taper-bush-3020-outside-diameter-485mm-material-steel-sku-14090147/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 3020 outside diameter 430mm material cast iron SKU: 14090146](https://maedler.in/product/bolt-on-hub-for-taper-bush-3020-outside-diameter-430mm-material-cast-iron-sku-14090146/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 3020 outside diameter 220mm material cast iron SKU: 14090145](https://maedler.in/product/bolt-on-hub-for-taper-bush-3020-outside-diameter-220mm-material-cast-iron-sku-14090145/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 2517 outside diameter 340mm material cast iron SKU: 14090141](https://maedler.in/product/bolt-on-hub-for-taper-bush-2517-outside-diameter-340mm-material-cast-iron-sku-14090141/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 2517 outside diameter 185mm material cast iron SKU: 14090140](https://maedler.in/product/bolt-on-hub-for-taper-bush-2517-outside-diameter-185mm-material-cast-iron-sku-14090140/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 2012 outside diameter 270mm material cast iron SKU: 14090136](https://maedler.in/product/bolt-on-hub-for-taper-bush-2012-outside-diameter-270mm-material-cast-iron-sku-14090136/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 2012 outside diameter 145mm material cast iron SKU: 14090135](https://maedler.in/product/bolt-on-hub-for-taper-bush-2012-outside-diameter-145mm-material-cast-iron-sku-14090135/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron SKU: 14090130](https://maedler.in/product/bolt-on-hub-for-taper-bush-1615-outside-diameter-200mm-material-cast-iron-sku-14090130/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 1610 outside diameter 130mm material cast iron SKU: 14090125](https://maedler.in/product/bolt-on-hub-for-taper-bush-1610-outside-diameter-130mm-material-cast-iron-sku-14090125/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron SKU: 14090121](https://maedler.in/product/bolt-on-hub-for-taper-bush-1210-outside-diameter-180mm-material-cast-iron-sku-14090121/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 1210 outside diameter 120mm material cast iron SKU: 14090120](https://maedler.in/product/bolt-on-hub-for-taper-bush-1210-outside-diameter-120mm-material-cast-iron-sku-14090120/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Welding hub for taper bush 5050 outside diameter 276mm material steel SKU: 14090113](https://maedler.in/product/welding-hub-for-taper-bush-5050-outside-diameter-276mm-material-steel-sku-14090113/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 4545 outside diameter 254mm material steel SKU: 14090112](https://maedler.in/product/welding-hub-for-taper-bush-4545-outside-diameter-254mm-material-steel-sku-14090112/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 4040 outside diameter 225mm material steel SKU: 14090111](https://maedler.in/product/welding-hub-for-taper-bush-4040-outside-diameter-225mm-material-steel-sku-14090111/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 3535 outside diameter 184mm material steel SKU: 14090110](https://maedler.in/product/welding-hub-for-taper-bush-3535-outside-diameter-184mm-material-steel-sku-14090110/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 3525 outside diameter 184mm material steel SKU: 14090109](https://maedler.in/product/welding-hub-for-taper-bush-3525-outside-diameter-184mm-material-steel-sku-14090109/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 3030 outside diameter 152mm material steel SKU: 14090108](https://maedler.in/product/welding-hub-for-taper-bush-3030-outside-diameter-152mm-material-steel-sku-14090108/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 3020 outside diameter 152mm material steel SKU: 14090107](https://maedler.in/product/welding-hub-for-taper-bush-3020-outside-diameter-152mm-material-steel-sku-14090107/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 2517 outside diameter 127mm material steel SKU: 14090106](https://maedler.in/product/welding-hub-for-taper-bush-2517-outside-diameter-127mm-material-steel-sku-14090106/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 2012 outside diameter 96mm material steel SKU: 14090105](https://maedler.in/product/welding-hub-for-taper-bush-2012-outside-diameter-96mm-material-steel-sku-14090105/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 1615 outside diameter 83mm material steel SKU: 14090104](https://maedler.in/product/welding-hub-for-taper-bush-1615-outside-diameter-83mm-material-steel-sku-14090104/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 1610 outside diameter 83mm material steel SKU: 14090103](https://maedler.in/product/welding-hub-for-taper-bush-1610-outside-diameter-83mm-material-steel-sku-14090103/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 1215 outside diameter 76mm material steel SKU: 14090102](https://maedler.in/product/welding-hub-for-taper-bush-1215-outside-diameter-76mm-material-steel-sku-14090102/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 1210 outside diameter 73mm material steel SKU: 14090101](https://maedler.in/product/welding-hub-for-taper-bush-1210-outside-diameter-73mm-material-steel-sku-14090101/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Chain puller 16 B to 63mm pitch 1" - max. 63mm with turn lever SKU: 14072200](https://maedler.in/product/chain-puller-16-b-to-63mm-pitch-1-max-63mm-with-turn-lever-sku-14072200/): Product No. 140 721 00 for chains up to 12 B, with knob. Product No. 140 722 00 for chains from 16 B, with turn lever. Can also be used for similar sizes of other standards and for double-strand and triple-strand chains . - [Chain puller 081 - 12 B pitch 1/2" up to 3/4"x 7/16" with knob SKU: 14072100](https://maedler.in/product/chain-puller-081-12-b-pitch-1-2-up-to-3-4x-7-16-with-knob-sku-14072100/): Product No. 140 721 00 for chains up to 12 B, with knob. Product No. 140 722 00 for chains from 16 B, with turn lever. Can also be used for similar sizes of other standards and for double-strand and triple-strand chains . - [Replacement pin for chain breaker 1" part-no. 14070800 SKU: 14071800](https://maedler.in/product/replacement-pin-for-chain-breaker-1-part-no-14070800-sku-14071800/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Replacement pin for chain breaker 5/8" - 3/4" part-no. 14070700 SKU: 14071700](https://maedler.in/product/replacement-pin-for-chain-breaker-5-8-3-4-part-no-14070700-sku-14071700/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Replacement pin for chain breaker 1/2" part-no. 14070500 SKU: 14071500](https://maedler.in/product/replacement-pin-for-chain-breaker-1-2-part-no-14070500-sku-14071500/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Replacement pin for chain breaker 3/8" part-no. 14070300 SKU: 14071300](https://maedler.in/product/replacement-pin-for-chain-breaker-3-8-part-no-14070300-sku-14071300/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Chain breaker 16 B-1, pitch 1" SKU: 14070800](https://maedler.in/product/chain-breaker-16-b-1-pitch-1-sku-14070800/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Chain breaker 10 B-1 to 12 B-2, pitch 5/8" - 3/4" SKU: 14070700](https://maedler.in/product/chain-breaker-10-b-1-to-12-b-2-pitch-5-8-3-4-sku-14070700/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Chain breaker 081 to 08 B-2 pitch 1/2 " SKU: 14070500](https://maedler.in/product/chain-breaker-081-to-08-b-2-pitch-1-2-sku-14070500/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Chain breaker 06 B pitch 3/8 " SKU: 14070300](https://maedler.in/product/chain-breaker-06-b-pitch-3-8-sku-14070300/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [CRC Inox Kleen 20720-AU Cleaner for stainless steel with NSF C1/A7 registration food processing safe SKU: 14070269](https://maedler.in/product/crc-inox-kleen-20720-au-cleaner-for-stainless-steel-with-nsf-c1-a7-registration-food-processing-safe-sku-14070269/): CRC® Stainless Steel Cleaner Spray is a water-based foam cleaner with a glossy effect for stainless steel, aluminium and chrome. • NSF registration for use in the food industry  (category A7 - NSF-reg.-Nr.142307). • removes dirt, marks and water stains. • glossy surface after application. Attention H222 Extremely flammable aerosol. H319 Causes serious eye irritation. - [CRC Industrial Eco Degreaser 33344-AA Powerful degreaser and cleaner with NSF K1/A8 registration food processing safe SKU: 14070265](https://maedler.in/product/crc-industrial-eco-degreaser-33344-aa-powerful-degreaser-and-cleaner-with-nsf-k1-a8-registration-food-processing-safe-sku-14070265/): CRC® Industrial ECO Degreaser penetrates and removes grease, oil, lubricants, tar, adhesives and other contaminations. • NSF registration for use in the food industry  (category A8 - NSF-reg.-Nr. 162737). • universally applicable in all industrial areas. • Without residues after drying. • biodegradable. • well compatible with most plastics. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [CRC ECO Leak Finder 10732-AI Gas leak detector water based 500ml with NSF P1 registration food processing safe SKU: 14070260](https://maedler.in/product/crc-eco-leak-finder-10732-ai-gas-leak-detector-water-based-500ml-with-nsf-p1-registration-food-processing-safe-sku-14070260/): CRC® ECO Leak Finder is a water-based test liquid for gas and compressed air systems of all types, which forms clearly visible foam bubbles at the gas leak. • NSF registration for use in the food industry (category P1 - NSF-reg.-Nr. 142801). • requirements according to DIN EN 14291. • degradability according to OECD 301B: 31%. • Temperature range: 0°C to +50°C. Attention H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. - [CRC 3-36 10110-AU Lubrication and corrosion protection 500ml with NSF H2 registration food processing safe SKU: 14070257](https://maedler.in/product/crc-3-36-10110-au-lubrication-and-corrosion-protection-500ml-with-nsf-h2-registration-food-processing-safe-sku-14070257/): CRC® 3-36 Spray is an universal corrosion protection and lubricating oil for metal surfaces of all kinds. • NSF registration for use in the food industry  (category H2 - NSF-reg.-Nr. 139736). • good creeping and lubricating properties. • displaces moisture. • for inner bearing protection up to 6 months. • Temperature range: -50°C to +120°C. Attention H223 Flammable aerosol. H229 Pressurised container: May burst if heated. - [CRC Extreme Lube 32603-AA High pressure lubricant 500ml with NSF H1 registration food processing safe SKU: 14070255](https://maedler.in/product/crc-extreme-lube-32603-aa-high-pressure-lubricant-500ml-with-nsf-h1-registration-food-processing-safe-sku-14070255/): CRC® Extreme Lube-Spray is a high pressure synthetic grease for use in direct food processing applications. • NSF registration for use in the food industry  (category H1 - NSF-reg.-Nr. 143143). • high water resistance. • good material compatibility. • NLGI class 2. • 2-way spray head (spot/area). • Temperature range: -40°C to +180°C. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. - [CRC Food Grease 32317-AA Multipurpose grease 500ml with NSF H1 registration food processing safe SKU: 14070253](https://maedler.in/product/crc-food-grease-32317-aa-multipurpose-grease-500ml-with-nsf-h1-registration-food-processing-safe-sku-14070253/): CRC® Food Grease-Spray is an universal long-life grease for food processing technology for the lubrication of bearings, gears and guides. • NSF registration for use in the food industry  (category H1 - NSF-reg.-Nr. 139907). • colourless. • silicone-free. • 2-way-sprayer (precision or wide straw). • Temperature range: -40°C to +140°C. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H412 Harmful to aquatic life with long lasting effects. - [CRC Multi Oil 32605-AA General purpose lubricant 500ml with NSF H1 registration food processing safe SKU: 14070251](https://maedler.in/product/crc-multi-oil-32605-aa-general-purpose-lubricant-500ml-with-nsf-h1-registration-food-processing-safe-sku-14070251/): CRC® Multifunctional oil spray is an universal creeping and lubricating oil for the food industry. • NSF registration for use in the food industry  (category H1 - NSF-reg.-Nr. 017048). • good creeping and lubricating properties. • loosens stiff screw connections. • odourless and silicone-free. • 2-way-sprayer (precision or wide straw). • Temperature range: -18°C to +120°C. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. - [OKS 2661 Fast Cleaner Spray 600ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070238](https://maedler.in/product/oks-2661-fast-cleaner-spray-600ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070238/): OKS 2661 - Fast Cleaner Spray for residue-free cleaning of machine parts and material surfaces.• suitable for degreasing and cleaning.• highly effective due to cleansing active ingredients.• solvent-based cleaner.• fast and residue-free evaporation.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [OKS 1361 Silicone Separator NSF H1 Spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070237](https://maedler.in/product/oks-1361-silicone-separator-nsf-h1-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070237/): OKS 1361 - Silicone Separator Spray can be used as a separating agent in casting, injection moulding and extrusion processes of plastics and elastomers.• release for the food processing industry. (Category H1 - NSF Reg. No 129481)• water repellent and weather resistant.• MOSH/MOAH free.• temperature range: -50°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated. - [OKS 1110 Multi-Silicone Grease NSF H1 Tube 80ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070236](https://maedler.in/product/oks-1110-multi-silicone-grease-nsf-h1-tube-80ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070236/): OKS 1110 for use as an adhesive, transparent silicone grease for fittings, seals and plastic parts.• release for the food processing industry. (Category H1 - NSF Reg. No 124381)• resistant to hot and cold water, acetone, ethanol, ethylene glycol, glycerine and methanol.• MOSH/MOAH free.• NLGI-Class: 3.• temperature range: -40°C to +200°C. - [OKS 252 White High-Temperature Paste for Food Processing Technology Brush tin 250g (Actual safety data sheet on the internet in the section Downloads) SKU: 14070235](https://maedler.in/product/oks-252-white-high-temperature-paste-for-food-processing-technology-brush-tin-250g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070235/): OKS 252 for the lubrication of highly loaded sliding surfaces, at low sliding speeds or oscillating movements.• good water resistance.• good corrosion protection.• Release for the food processing industry (Category H1 - NSF Reg. No 135748).• MOSH/MOAH and metal-free.• Temperature range: -30°C to +160°C (as release paste up to +1200ºC). - [OKS 250 White Allround Paste, metal-free Brush tin 250g (Actual safety data sheet on the internet in the section Downloads) SKU: 14070234](https://maedler.in/product/oks-250-white-allround-paste-metal-free-brush-tin-250g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070234/): OKS 250 for the lubrication of highly loaded sliding surfaces, at low sliding speeds or oscillating movements.• resistant to hot and cold water.• very good corrosion protection.• free of metal.• release for the food processing industry (Category H2 - NSF Reg. No 131379).• temperature range: -40°C to +200°C (as separating paste to +1400ºC).DangerH315 Causes skin irritation.H318 Causes serious eye damage.H410 Very toxic to aquatic life with long lasting effects. - [OKS 221 MoS2 Rapid Paste Spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070233](https://maedler.in/product/oks-221-mos2-rapid-paste-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070233/): OKS 221 - Spray as assembly paste with very high MoS2-Concentration for pressing and forming processes as well as running-in lubrication of highly loaded sliding surfaces.• protects against wear and sliding.• no working into the sliding surface required.• lowest friction with highest load capacity.• good emergency running properties.• VKA test (welding force): 4,200 N.• temperature range: -35°C to +450°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H318 Causes serious eye damage.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [OKS 391 Cutting Oil for all metals Spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070232](https://maedler.in/product/oks-391-cutting-oil-for-all-metals-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070232/): OKS 391 - Cutting Oil Spray for drip lubrication of cutting tools during machining operations, e.g. drilling, thread cutting, sawing, milling and stamping.• reduces friction and effort.• permits high continuous loads and higher cutting speeds.• enables optimum cutting surfaces.• extends tool life through wear reduction.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated. - [OKS 371 Universal Oil for Food Processing Technology NSF H1 Spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070231](https://maedler.in/product/oks-371-universal-oil-for-food-processing-technology-nsf-h1-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070231/): OKS 371 - Universal Oil Spray can be used as a rust remover, contact agent, corrosion protection and care product.• very effective due good creeping properties.• release for the food processing industry. (Category H1 - NSF Reg. No 124384)• versatile application possibilities.• water displacing.• viscosity 14 mm²/s at +40 °C.• temperature range: -10°C to +180°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways. - [Caramba Intensive Stainless Steel Cleaner NSF A7 Spray 500ml 63308401 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070188](https://maedler.in/product/caramba-intensive-stainless-steel-cleaner-nsf-a7-spray-500ml-63308401-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070188/): Caramba Stainless Steel Cleaner Spray cleans and protects all metal surfaces.• protects against dirt and tarnishing.• release for the food processing industry. (Category A7 - NSF Reg. No. 139339)• removes dirt, lime stains, flash rust, grease, oils and resins.• effective on stainless steel, aluminium, copper and brass.• optimum protection against tarnishing.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H412 Harmful to aquatic life with long lasting effects. - [Caramba Intensive Cold Spray 500ml 690019 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070187](https://maedler.in/product/caramba-intensive-cold-spray-500ml-690019-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070187/): Caramba Cold Spray facilitates the pressing of metal components such as ball bearings, bushings, chain links, shafts, etc. into tight fits. Can also be used for troubleshooting in electronic areas and for repair purposes in industry.• versatile use.• fast cooling up to -40°C.• risk of frostbite at body contact.• residue-free evaporation.Danger H220 Extremely flammable gas.H229 Pressurised container: May burst if heated. - [Caramba High Performance Silicone Spray 500ml 6103051 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070186](https://maedler.in/product/caramba-high-performance-silicone-spray-500ml-6103051-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070186/): Caramba Silicone Spray is a multifunctional lubricant and care product for metal, plastic and rubber.• lubricates and maintains.• release for the food processing industry. (Category H2 - NSF Reg. No. 142272)• colourless and low odour, no staining.• high water resistance prevents unwanted icing.• temperature range: -30°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [Caramba High Performance Copper Paste Cartridge 200ml 60268176 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070185](https://maedler.in/product/caramba-high-performance-copper-paste-cartridge-200ml-60268176-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070185/): Caramba Copper Paste provides highly effective protective and lubricating coatings on parts exposed to high temperatures.• protects against corrosion, Fixed burning and seizure.• against noise and vibrations.• facilitates installation and removal.• due to its metal content, it is also ideal can also be used as a heat-conducting paste.• temperature range: -30°C to +1.100°C.AttentionH229 Pressurised container: May burst if heated.H319 Causes serious eye irritation.H400 Very toxic to aquatic life.H411 Toxic to aquatic life with long lasting effects. - [Caramba High Performance Chain Spray 500ml 60628501 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070184](https://maedler.in/product/caramba-high-performance-chain-spray-500ml-60628501-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070184/): Caramba Chain Spray is a fully synthetic, colourless chain grease that is optimally suited for chains with high rotation speeds.• extreme lubricity. (VKA-Value: 1900N).• protects against wear and corrosion.• spin-resistant and splash water resistant.• high creep capacity.• suitable for O-, X- und Z-rings.• temperature range: -40°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H411 Toxic to aquatic life with long lasting effects. - [Caramba High Performance Wire Rope and Gear Grease Spray 500ml 64540001 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070183](https://maedler.in/product/caramba-high-performance-wire-rope-and-gear-grease-spray-500ml-64540001-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070183/): Caramba High Performance Wire Rope and Gear Grease is a neutral, anthracite-coloured and odourless lubricant for demanding tribological tasks wherever components are subjected to high pressures.• for high loads (VKA-Value: 2100N).• salt and splash water resistant.• optimum adhesion.• prevents surface welding.• temperature range: -30°C to +120°C (emergency lubrication up to +450°C).DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [Caramba High Performance White Spray Grease 500ml 6071851 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070182](https://maedler.in/product/caramba-high-performance-white-spray-grease-500ml-6071851-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070182/): Caramba High Performance White Spray Grease for lubrication and corrosion protection of all types of heavily stressed parts.• corrosion-protective.• for high loads (VKA-Value: 1400N).• very good creep ability.• extremely spin-off resistant and water resistant.• optimum lubrication of hard-to-reach places.• temperature range: -30°C to +150°C (Emergency Lubrication by PTFE up to +250°C).DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [Caramba Super Multi-Use-Spray 500ml 6612011 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070181](https://maedler.in/product/caramba-super-multi-use-spray-500ml-6612011-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070181/): Caramba Multi-Use-Oil can be used as a rust remover, contact agent, corrosion protection and metal care product.• very good lubricating properties.• high moisture displacement and good corrosion protection.• excellent creeping properties.• well suited as a rust remover.• silicone and resin-free.• temperature range: -40°C to +180°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H412 Harmful to aquatic life with long lasting effects. - [BALLISTOL Universal- & Plastic Cleaner 750ml 25075 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070170](https://maedler.in/product/ballistol-universal-plastic-cleaner-750ml-25075-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070170/): BALLISTOL Universal & Plastic Cleaner for powerful cleaning.• high dirt dissolving power for grease and oil.• no wiping with water necessary.• removes 99.9% of bacteria.• short reaction time.• has an antistatic effect.• dust and dirt repellent.• gentle on materials.• silicone-free, solvent-free. - [BALLISTOL Multi-Purpose Grease cartridge 400g 25350 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070169](https://maedler.in/product/ballistol-multi-purpose-grease-cartridge-400g-25350-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070169/): BALLISTOL Multi-Purpose Grease for use in the lubrication of sliding and roller bearings.• silicone-, PTFE-, acid- and resin-free.• very good water resistance.• reliable long-term lubrication.• good sealing behaviour.• recommended for central lubrication systems.• complies with DIN 51825: KP 2 K-30 & ISO 6743-9: ISO-L-XCCHB 2.• temperature range: -35°C to +130°C. - [BALLISTOL Garage-Oil Spray 400ml 22960 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070168](https://maedler.in/product/ballistol-garage-oil-spray-400ml-22960-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070168/): BALLISTOL Garage-Oil-Spray is ideal for the maintenance and care of machines and equipment of all kinds.• silicone-, PTFE-, acid- and resin-free.• effortlessly removes flash rust and cleans from foreign particles.• keeps moving parts running smoothly.• protects iron, steel and non-ferrous metals from rust and corrosion.• Tested according to DIN 50 021-SS (salt chamber spray test).DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H412 Harmful to aquatic life with long lasting effects. - [BALLISTOL Teflon-Spray 400ml 25607 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070167](https://maedler.in/product/ballistol-teflon-spray-400ml-25607-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070167/): BALLISTOL Teflon™-Spray on PTFE-basis for a consistent and durable lubrication and sliding activity without oil or grease content.• silicone-, acid- and resin-free.• clean dry lubrication without adhering dirt and oily hands.• effective reduction of static, sliding and rolling friction.• no annoying lubricant sludge.• hygienic, clean and nature-friendly.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H319 Causes serious eye irritation. - [BALLISTOL Silicone-Oil Spray 400ml 25307 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070166](https://maedler.in/product/ballistol-silicone-oil-spray-400ml-25307-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070166/): BALLISTOL Silicone-Oil-Spray for the lubrication and protection of parts made of rubber, plastic and metal.Typical applications: Plastic gears, plastic bearings, rubber bearings, cable pulls, guide rails, guides, rollers, slideways.• PTFE-, acid- and resin-free.• very economical with a high silicone content.• lubrication free of mineral oil.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [BALLISTOL Premium Rust Protection Oil Spray 400ml 25261 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070165](https://maedler.in/product/ballistol-premium-rust-protection-oil-spray-400ml-25261-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070165/): BALLISTOL Premium Rust Protection Oil Spray is used for the care, maintenance and protection of machines, equipment, precision tools, measuring instruments, moulds and stamping presses.• silicone-, PTFE-, acid- and resin-free.• ideal for long-term preservation in high atmospheric humidity and aggressive ambient air.• protects against rust for a long time.• displaces moisture.• temperature range: -40°C to +150°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H412 Harmful to aquatic life with long lasting effects. - [BALLISTOL Copper-Graphite-Spray 200ml 25200 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070164](https://maedler.in/product/ballistol-copper-graphite-spray-200ml-25200-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070164/): BALLISTOL Copper-Graphite-Spray facilitates assembly and prevents seizing and jamming of components.• silicone-, PTFE-, acid- and resin-free.• reliably prevents seizing.• reduces friction losses.• ideal for threads and fits.• prevents contact corrosion with different metals.• temperature range: –50°C to +1,000°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H412 Harmful to aquatic life with long lasting effects. - [BALLISTOL Universal Oil VarioFlex 350ml 21727 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070163](https://maedler.in/product/ballistol-universal-oil-varioflex-350ml-21727-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070163/): BALLISTOL Universal Oil Spray cleans, maintains and protects. The capillary tube with memory effect can be bent individually.• extremely creepable.• sliding active.• completely biodegradable.• food safe.• skin-compatible.• completely harmless according to §§ 30,31 LFGB and EG Regulation No. 1935/2004.DangerH222 Extremely flammable gas.H229 Pressurised container: May burst if heated. - [BALLISTOL Universal Oil Spray 400ml 21810 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070162](https://maedler.in/product/ballistol-universal-oil-spray-400ml-21810-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070162/): BALLISTOL Universal Oil Spray cleans, maintains, protects, preserves, dissolves unwanted residues and provides rust protection without gumming up.• extremely creepable.• sliding active.• completely biodegradable.• food safe.• skin-compatible.• completely harmless according to §§ 30,31 LFGB and EG Regulation No. 1935/2004.DangerH222 Extremely flammable gas.H229 Pressurised container: May burst if heated. - [BALLISTOL Universal Oil Liquid 500ml 21150 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070161](https://maedler.in/product/ballistol-universal-oil-liquid-500ml-21150-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070161/): BALLISTOL Universal Oil cleans, maintains, protects, preserves, dissolves unwanted residues and provides rust protection without gumming up.• extremely creepable.• sliding active.• completely biodegradable.• food safe.• skin-compatible.• completely harmless according to §§ 30,31 LFGB and EG Regulation No. 1935/2004. - [WD-40 SPECIALIST Degreaser 500ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070155](https://maedler.in/product/wd-40-specialist-degreaser-500ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070155/): The special spray removes grease, oil, dirt and soot. This product is particularly suitable for metals. Spray head can be adjusted for area or spot spraying.• cleans equipment to make it run smoother and last longer.• works immediately on contact.• easy to rinse and leaves no residue.• can be used on a variety of surfaces, including metal.• extremely flammable.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 SPECIALIST Brake Cleaner Spray 500ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070154](https://maedler.in/product/wd-40-specialist-brake-cleaner-spray-500ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070154/): The special spray effectively removes grease, oil, dirt and deposits from brakes, clutch, gearbox and other components.• residue-free.• works immediately:• powerful spray.• extremely flammable.• for use at room temperature.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Lock Lube 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070152](https://maedler.in/product/wd-40-specialist-lock-lube-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070152/): The special spray has been specially developed for the maintenance of all types of locking cylinders.• penetrates and dissolves.• lubricates and protects.• prevents wear.• temperature range: -70°C to +150°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 SPECIALIST Contact Cleaner 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070151](https://maedler.in/product/wd-40-specialist-contact-cleaner-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070151/): Special Spray that cleans oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment. Spray head (only 400 ml) can be adjusted for area or spot spraying.• fast active non conductive cleaner.• penetrates quickly and leaves no residue.• penetrates in those hard to reach areas.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Contact Cleaner 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070150](https://maedler.in/product/wd-40-specialist-contact-cleaner-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070150/): Special Spray that cleans oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment. Spray head (only 400 ml) can be adjusted for area or spot spraying.• fast active non conductive cleaner.• penetrates quickly and leaves no residue.• penetrates in those hard to reach areas.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 315mm SKU: 15033100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-315mm-sku-15033100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 280mm SKU: 15032800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-280mm-sku-15032800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 250mm SKU: 15032500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-250mm-sku-15032500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 224mm SKU: 15032200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-224mm-sku-15032200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 200mm SKU: 15032000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-200mm-sku-15032000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 180mm SKU: 15031800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-180mm-sku-15031800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 160mm SKU: 15031600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-160mm-sku-15031600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 140mm SKU: 15031400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-140mm-sku-15031400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 125mm SKU: 15031200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-125mm-sku-15031200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 112mm SKU: 15031100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-112mm-sku-15031100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 100mm SKU: 15031000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-100mm-sku-15031000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 90mm SKU: 15030900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-90mm-sku-15030900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 80mm SKU: 15030800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-80mm-sku-15030800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 71mm SKU: 15030700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-71mm-sku-15030700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 63mm SKU: 15030600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-63mm-sku-15030600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 315mm SKU: 15023100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-315mm-sku-15023100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 280mm SKU: 15022800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-280mm-sku-15022800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 250mm SKU: 15022500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-250mm-sku-15022500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 224mm SKU: 15022200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-224mm-sku-15022200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 200mm SKU: 15022000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-200mm-sku-15022000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 180mm SKU: 15021800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-180mm-sku-15021800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 160mm SKU: 15021600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-160mm-sku-15021600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 140mm SKU: 15021400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-140mm-sku-15021400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 125mm SKU: 15021200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-125mm-sku-15021200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 112mm SKU: 15021100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-112mm-sku-15021100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 100mm SKU: 15021000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-100mm-sku-15021000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 90mm SKU: 15020900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-90mm-sku-15020900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 80mm SKU: 15020800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-80mm-sku-15020800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 71mm SKU: 15020700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-71mm-sku-15020700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 63mm SKU: 15020600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-63mm-sku-15020600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 56mm SKU: 15020300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-56mm-sku-15020300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 50mm SKU: 15020200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-50mm-sku-15020200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 315mm SKU: 15013100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-315mm-sku-15013100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 280mm SKU: 15012800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-280mm-sku-15012800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 250mm SKU: 15012500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-250mm-sku-15012500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 224mm SKU: 15012200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-224mm-sku-15012200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 200mm SKU: 15012000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-200mm-sku-15012000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 180mm SKU: 15011800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-180mm-sku-15011800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 160mm SKU: 15011600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-160mm-sku-15011600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 140mm SKU: 15011400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-140mm-sku-15011400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 125mm SKU: 15011200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-125mm-sku-15011200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 112mm SKU: 15011100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-112mm-sku-15011100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 100mm SKU: 15011000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-100mm-sku-15011000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 90mm SKU: 15010900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-90mm-sku-15010900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 80mm SKU: 15010800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-80mm-sku-15010800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 71mm SKU: 15010700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-71mm-sku-15010700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 63mm SKU: 15010600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-63mm-sku-15010600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 56mm SKU: 15010300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-56mm-sku-15010300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 50mm SKU: 15010200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-50mm-sku-15010200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [Plastic guide rail 60 x 20 x 2000mm for roller chain 12 B-3 SKU: 14113701](https://maedler.in/product/plastic-guide-rail-60-x-20-x-2000mm-for-roller-chain-12-b-3-sku-14113701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 60 x 15 x 2000mm for roller chain 12 B-3 SKU: 14113700](https://maedler.in/product/plastic-guide-rail-60-x-15-x-2000mm-for-roller-chain-12-b-3-sku-14113700/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 20 x 2000mm for roller chain 10 B-3 SKU: 14113602](https://maedler.in/product/plastic-guide-rail-55-x-20-x-2000mm-for-roller-chain-10-b-3-sku-14113602/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 15 x 2000mm for roller chain 10 B-3 SKU: 14113601](https://maedler.in/product/plastic-guide-rail-55-x-15-x-2000mm-for-roller-chain-10-b-3-sku-14113601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 10 x 2000mm for roller chain 10 B-3 SKU: 14113600](https://maedler.in/product/plastic-guide-rail-55-x-10-x-2000mm-for-roller-chain-10-b-3-sku-14113600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 20 x 2000mm for roller chain 08 B-3 SKU: 14113502](https://maedler.in/product/plastic-guide-rail-45-x-20-x-2000mm-for-roller-chain-08-b-3-sku-14113502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 15 x 2000mm for roller chain 08 B-3 SKU: 14113501](https://maedler.in/product/plastic-guide-rail-45-x-15-x-2000mm-for-roller-chain-08-b-3-sku-14113501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 10 x 2000mm for roller chain 08 B-3 SKU: 14113500](https://maedler.in/product/plastic-guide-rail-45-x-10-x-2000mm-for-roller-chain-08-b-3-sku-14113500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 10 x 2000mm for roller chain 06 B-3 SKU: 14113100](https://maedler.in/product/plastic-guide-rail-35-x-10-x-2000mm-for-roller-chain-06-b-3-sku-14113100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 65 x 20 x 2000mm for double-strand roller chain 16B-2 SKU: 14112802](https://maedler.in/product/plastic-guide-rail-65-x-20-x-2000mm-for-double-strand-roller-chain-16b-2-sku-14112802/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 65 x 15 x 2000mm for double-strand roller chain 16B-2 SKU: 14112801](https://maedler.in/product/plastic-guide-rail-65-x-15-x-2000mm-for-double-strand-roller-chain-16b-2-sku-14112801/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 20 x 2000mm for double-strand roller chain 12B-2 SKU: 14112702](https://maedler.in/product/plastic-guide-rail-45-x-20-x-2000mm-for-double-strand-roller-chain-12b-2-sku-14112702/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 15 x 2000mm for double-strand roller chain 12B-2 SKU: 14112701](https://maedler.in/product/plastic-guide-rail-45-x-15-x-2000mm-for-double-strand-roller-chain-12b-2-sku-14112701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 20 x 2000mm for double-strand roller chain 10B-2 SKU: 14112602](https://maedler.in/product/plastic-guide-rail-40-x-20-x-2000mm-for-double-strand-roller-chain-10b-2-sku-14112602/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 15 x 2000mm for double-strand roller chain 10B-2 SKU: 14112601](https://maedler.in/product/plastic-guide-rail-40-x-15-x-2000mm-for-double-strand-roller-chain-10b-2-sku-14112601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 10 x 2000mm for double-strand roller chain 10B-2 SKU: 14112600](https://maedler.in/product/plastic-guide-rail-40-x-10-x-2000mm-for-double-strand-roller-chain-10b-2-sku-14112600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 20 x 2000mm for double-strand roller chain 08B-2 SKU: 14112502](https://maedler.in/product/plastic-guide-rail-35-x-20-x-2000mm-for-double-strand-roller-chain-08b-2-sku-14112502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 15 x 2000mm for double-strand roller chain 08B-2 SKU: 14112501](https://maedler.in/product/plastic-guide-rail-35-x-15-x-2000mm-for-double-strand-roller-chain-08b-2-sku-14112501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 10 x 2000mm for double-strand roller chain 08B-2 SKU: 14112500](https://maedler.in/product/plastic-guide-rail-35-x-10-x-2000mm-for-double-strand-roller-chain-08b-2-sku-14112500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 10 x 2000mm for double-strand roller chain 06B-2 SKU: 14112100](https://maedler.in/product/plastic-guide-rail-25-x-10-x-2000mm-for-double-strand-roller-chain-06b-2-sku-14112100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 20 x 2000mm for roller chain 16B-1 SKU: 14110801](https://maedler.in/product/plastic-guide-rail-40-x-20-x-2000mm-for-roller-chain-16b-1-sku-14110801/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 15 x 2000mm for roller chain 16B-1 SKU: 14110800](https://maedler.in/product/plastic-guide-rail-40-x-15-x-2000mm-for-roller-chain-16b-1-sku-14110800/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 20 x 2000mm for roller chain 12B-1 SKU: 14110701](https://maedler.in/product/plastic-guide-rail-25-x-20-x-2000mm-for-roller-chain-12b-1-sku-14110701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 15 x 2000mm for roller chain 12B-1 SKU: 14110700](https://maedler.in/product/plastic-guide-rail-25-x-15-x-2000mm-for-roller-chain-12b-1-sku-14110700/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 20 x 2000mm for roller chain 10B-1 SKU: 14110601](https://maedler.in/product/plastic-guide-rail-20-x-20-x-2000mm-for-roller-chain-10b-1-sku-14110601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 15 x 2000mm for roller chain 10B-1 SKU: 14110600](https://maedler.in/product/plastic-guide-rail-20-x-15-x-2000mm-for-roller-chain-10b-1-sku-14110600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 20 x 2000mm for roller chain 08B-1 SKU: 14110502](https://maedler.in/product/plastic-guide-rail-20-x-20-x-2000mm-for-roller-chain-08b-1-sku-14110502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 15 x 2000mm for roller chain 08B-1 SKU: 14110501](https://maedler.in/product/plastic-guide-rail-20-x-15-x-2000mm-for-roller-chain-08b-1-sku-14110501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 10 x 2000mm for roller chain 08B-1 SKU: 14110500](https://maedler.in/product/plastic-guide-rail-20-x-10-x-2000mm-for-roller-chain-08b-1-sku-14110500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 15 x 10 x 2000mm for roller chain 083-1 SKU: 14110300](https://maedler.in/product/plastic-guide-rail-15-x-10-x-2000mm-for-roller-chain-083-1-sku-14110300/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 15 x 10 x 2000mm for roller chain 06B-1 SKU: 14110100](https://maedler.in/product/plastic-guide-rail-15-x-10-x-2000mm-for-roller-chain-06b-1-sku-14110100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 60 x 20 x 1000mm for roller chain 12 B-3 SKU: 14103701](https://maedler.in/product/plastic-guide-rail-60-x-20-x-1000mm-for-roller-chain-12-b-3-sku-14103701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 60 x 15 x 1000mm for roller chain 12 B-3 SKU: 14103700](https://maedler.in/product/plastic-guide-rail-60-x-15-x-1000mm-for-roller-chain-12-b-3-sku-14103700/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 20 x 1000mm for roller chain 10 B-3 SKU: 14103602](https://maedler.in/product/plastic-guide-rail-55-x-20-x-1000mm-for-roller-chain-10-b-3-sku-14103602/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 15 x 1000mm for roller chain 10 B-3 SKU: 14103601](https://maedler.in/product/plastic-guide-rail-55-x-15-x-1000mm-for-roller-chain-10-b-3-sku-14103601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 10 x 1000mm for roller chain 10 B-3 SKU: 14103600](https://maedler.in/product/plastic-guide-rail-55-x-10-x-1000mm-for-roller-chain-10-b-3-sku-14103600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 20 x 1000mm for roller chain 08 B-3 SKU: 14103502](https://maedler.in/product/plastic-guide-rail-45-x-20-x-1000mm-for-roller-chain-08-b-3-sku-14103502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 15 x 1000mm for roller chain 08 B-3 SKU: 14103501](https://maedler.in/product/plastic-guide-rail-45-x-15-x-1000mm-for-roller-chain-08-b-3-sku-14103501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 10 x 1000mm for roller chain 08 B-3 SKU: 14103500](https://maedler.in/product/plastic-guide-rail-45-x-10-x-1000mm-for-roller-chain-08-b-3-sku-14103500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 10 x 1000mm for roller chain 06 B-3 SKU: 14103100](https://maedler.in/product/plastic-guide-rail-35-x-10-x-1000mm-for-roller-chain-06-b-3-sku-14103100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 65 x 20 x 1000mm for double-strand roller chain 16B-2 SKU: 14102802](https://maedler.in/product/plastic-guide-rail-65-x-20-x-1000mm-for-double-strand-roller-chain-16b-2-sku-14102802/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 65 x 15 x 1000mm for double-strand roller chain 16B-2 SKU: 14102801](https://maedler.in/product/plastic-guide-rail-65-x-15-x-1000mm-for-double-strand-roller-chain-16b-2-sku-14102801/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 20 x 1000mm for double-strand roller chain 12B-2 SKU: 14102702](https://maedler.in/product/plastic-guide-rail-45-x-20-x-1000mm-for-double-strand-roller-chain-12b-2-sku-14102702/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 15 x 1000mm for double-strand roller chain 12B-2 SKU: 14102701](https://maedler.in/product/plastic-guide-rail-45-x-15-x-1000mm-for-double-strand-roller-chain-12b-2-sku-14102701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 20 x 1000mm for double-strand roller chain 10B-2 SKU: 14102602](https://maedler.in/product/plastic-guide-rail-40-x-20-x-1000mm-for-double-strand-roller-chain-10b-2-sku-14102602/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 15 x 1000mm for double-strand roller chain 10B-2 SKU: 14102601](https://maedler.in/product/plastic-guide-rail-40-x-15-x-1000mm-for-double-strand-roller-chain-10b-2-sku-14102601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 10 x 1000mm for double-strand roller chain 10B-2 SKU: 14102600](https://maedler.in/product/plastic-guide-rail-40-x-10-x-1000mm-for-double-strand-roller-chain-10b-2-sku-14102600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 20 x 1000mm for double-strand roller chain 08B-2 SKU: 14102502](https://maedler.in/product/plastic-guide-rail-35-x-20-x-1000mm-for-double-strand-roller-chain-08b-2-sku-14102502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 15 x 1000mm for double-strand roller chain 08B-2 SKU: 14102501](https://maedler.in/product/plastic-guide-rail-35-x-15-x-1000mm-for-double-strand-roller-chain-08b-2-sku-14102501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 10 x 1000mm for double-strand roller chain 08B-2 SKU: 14102500](https://maedler.in/product/plastic-guide-rail-35-x-10-x-1000mm-for-double-strand-roller-chain-08b-2-sku-14102500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 10 x 1000mm for double-strand roller chain 06B-2 SKU: 14102100](https://maedler.in/product/plastic-guide-rail-25-x-10-x-1000mm-for-double-strand-roller-chain-06b-2-sku-14102100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 112mm SKU: 15311100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-112mm-sku-15311100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 100mm SKU: 15311000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-100mm-sku-15311000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPA, SPA and A (13) 1 groove nominal diameter 90mm SKU: 15310900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-90mm-sku-15310900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPA, SPA and A (13) 1 groove nominal diameter 80mm SKU: 15310800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-80mm-sku-15310800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPA, SPA and A (13) 1 groove nominal diameter 71mm SKU: 15310700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-71mm-sku-15310700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 315mm SKU: 15233100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-315mm-sku-15233100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 280mm SKU: 15232800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-280mm-sku-15232800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 250mm SKU: 15232500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-250mm-sku-15232500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 224mm SKU: 15232200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-224mm-sku-15232200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 200mm SKU: 15232000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-200mm-sku-15232000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 180mm SKU: 15231800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-180mm-sku-15231800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 160mm SKU: 15231600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-160mm-sku-15231600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 140mm SKU: 15231400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-140mm-sku-15231400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 125mm SKU: 15231200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-125mm-sku-15231200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 112mm SKU: 15231100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-112mm-sku-15231100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 100mm SKU: 15231000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-100mm-sku-15231000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 90mm SKU: 15230900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-90mm-sku-15230900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 80mm SKU: 15230800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-80mm-sku-15230800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 71mm SKU: 15230700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-71mm-sku-15230700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 63mm SKU: 15230600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-63mm-sku-15230600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 56mm SKU: 15230300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-56mm-sku-15230300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 50mm SKU: 15230200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-50mm-sku-15230200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 315mm SKU: 15223100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-315mm-sku-15223100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 280mm SKU: 15222800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-280mm-sku-15222800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 250mm SKU: 15222500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-250mm-sku-15222500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 224mm SKU: 15222200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-224mm-sku-15222200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 200mm SKU: 15222000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-200mm-sku-15222000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 180mm SKU: 15221800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-180mm-sku-15221800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 160mm SKU: 15221600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-160mm-sku-15221600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 140mm SKU: 15221400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-140mm-sku-15221400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 125mm SKU: 15221200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-125mm-sku-15221200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 112mm SKU: 15221100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-112mm-sku-15221100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 100mm SKU: 15221000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-100mm-sku-15221000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 90mm SKU: 15220900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-90mm-sku-15220900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 80mm SKU: 15220800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-80mm-sku-15220800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 71mm SKU: 15220700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-71mm-sku-15220700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 63mm SKU: 15220600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-63mm-sku-15220600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 56mm SKU: 15220300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-56mm-sku-15220300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 50mm SKU: 15220200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-50mm-sku-15220200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 315mm SKU: 15213100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-315mm-sku-15213100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 280mm SKU: 15212800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-280mm-sku-15212800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 250mm SKU: 15212500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-250mm-sku-15212500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 224mm SKU: 15212200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-224mm-sku-15212200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 200mm SKU: 15212000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-200mm-sku-15212000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 180mm SKU: 15211800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-180mm-sku-15211800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 160mm SKU: 15211600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-160mm-sku-15211600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 140mm SKU: 15211400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-140mm-sku-15211400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 125mm SKU: 15211200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-125mm-sku-15211200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 112mm SKU: 15211100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-112mm-sku-15211100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 100mm SKU: 15211000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-100mm-sku-15211000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 90mm SKU: 15210900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-90mm-sku-15210900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 80mm SKU: 15210800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-80mm-sku-15210800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 71mm SKU: 15210700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-71mm-sku-15210700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 63mm SKU: 15210600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-63mm-sku-15210600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 56mm SKU: 15210300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-56mm-sku-15210300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 50mm SKU: 15210200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-50mm-sku-15210200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material cast iron for taper-bush 2517 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 315mm SKU: 15133100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-315mm-sku-15133100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 280mm SKU: 15132800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-280mm-sku-15132800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 250mm SKU: 15132500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-250mm-sku-15132500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 224mm SKU: 15132200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-224mm-sku-15132200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 200mm SKU: 15132000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-200mm-sku-15132000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 180mm SKU: 15131800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-180mm-sku-15131800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 160mm SKU: 15131600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-160mm-sku-15131600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 140mm SKU: 15131400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-140mm-sku-15131400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 125mm SKU: 15131200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-125mm-sku-15131200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 112mm SKU: 15131100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-112mm-sku-15131100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 100mm SKU: 15131000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-100mm-sku-15131000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 90mm SKU: 15130900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-90mm-sku-15130900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 80mm SKU: 15130800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-80mm-sku-15130800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 71mm SKU: 15130700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-71mm-sku-15130700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 63mm SKU: 15130600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-63mm-sku-15130600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 280mm SKU: 15122800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-280mm-sku-15122800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 250mm SKU: 15122500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-250mm-sku-15122500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 224mm SKU: 15122200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-224mm-sku-15122200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 200mm SKU: 15122000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-200mm-sku-15122000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 180mm SKU: 15121800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-180mm-sku-15121800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 160mm SKU: 15121600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-160mm-sku-15121600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 140mm SKU: 15121400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-140mm-sku-15121400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 125mm SKU: 15121200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-125mm-sku-15121200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 112mm SKU: 15121100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-112mm-sku-15121100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 100mm SKU: 15121000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-100mm-sku-15121000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 90mm SKU: 15120900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-90mm-sku-15120900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 80mm SKU: 15120800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-80mm-sku-15120800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 71mm SKU: 15120700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-71mm-sku-15120700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 63mm SKU: 15120600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-63mm-sku-15120600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 315mm SKU: 15113100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-315mm-sku-15113100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 280mm SKU: 15112800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-280mm-sku-15112800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 250mm SKU: 15112500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-250mm-sku-15112500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 224mm SKU: 15112200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-224mm-sku-15112200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 200mm SKU: 15112000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-200mm-sku-15112000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 180mm SKU: 15111800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-180mm-sku-15111800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 160mm SKU: 15111600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-160mm-sku-15111600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 140mm SKU: 15111400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-140mm-sku-15111400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 125mm SKU: 15111200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-125mm-sku-15111200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 112mm SKU: 15111100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-112mm-sku-15111100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 100mm SKU: 15111000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-100mm-sku-15111000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 90mm SKU: 15110900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-90mm-sku-15110900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 80mm SKU: 15110800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-80mm-sku-15110800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 71mm SKU: 15110700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-71mm-sku-15110700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 63mm SKU: 15110600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-63mm-sku-15110600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 3020 profile XPB, SPB and B (17) 2 grooves nominal diameter 400mm SKU: 15524000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-400mm-sku-15524000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 315mm SKU: 15523100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-315mm-sku-15523100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 280mm SKU: 15522800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-280mm-sku-15522800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 250mm SKU: 15522500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-250mm-sku-15522500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 224mm SKU: 15522200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-224mm-sku-15522200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 200mm SKU: 15522000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-200mm-sku-15522000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 180mm SKU: 15521800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-180mm-sku-15521800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 2 grooves nominal diameter 160mm SKU: 15521600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-160mm-sku-15521600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 2 grooves nominal diameter 140mm SKU: 15521400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-140mm-sku-15521400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 2 grooves nominal diameter 125mm SKU: 15521200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-125mm-sku-15521200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 2 grooves nominal diameter 112mm SKU: 15521100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-112mm-sku-15521100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 2 grooves nominal diameter 100mm SKU: 15521000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-100mm-sku-15521000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 280mm SKU: 15512800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-280mm-sku-15512800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 250mm SKU: 15512500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-250mm-sku-15512500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 224mm SKU: 15512200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-224mm-sku-15512200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 200mm SKU: 15512000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-200mm-sku-15512000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 180mm SKU: 15511800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-180mm-sku-15511800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 160mm SKU: 15511600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-160mm-sku-15511600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 140mm SKU: 15511400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-140mm-sku-15511400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 125mm SKU: 15511200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-125mm-sku-15511200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 112mm SKU: 15511100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-112mm-sku-15511100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 100mm SKU: 15511000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-100mm-sku-15511000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 315mm SKU: 15433100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-315mm-sku-15433100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 280mm SKU: 15432800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-280mm-sku-15432800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 250mm SKU: 15432500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-250mm-sku-15432500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 224mm SKU: 15432200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-224mm-sku-15432200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 200mm SKU: 15432000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-200mm-sku-15432000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 180mm SKU: 15431800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-180mm-sku-15431800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 180mm SKU: 15431600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-180mm-sku-15431600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 140mm SKU: 15431400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-140mm-sku-15431400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 125mm SKU: 15431200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-125mm-sku-15431200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 112mm SKU: 15431100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-112mm-sku-15431100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 100mm SKU: 15431000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-100mm-sku-15431000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 90mm SKU: 15430900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-90mm-sku-15430900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 80mm SKU: 15430800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-80mm-sku-15430800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 315mm SKU: 15423100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-315mm-sku-15423100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 280mm SKU: 15422800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-280mm-sku-15422800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 250mm SKU: 15422500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-250mm-sku-15422500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 224mm SKU: 15422200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-224mm-sku-15422200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 200mm SKU: 15422000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-200mm-sku-15422000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 180mm SKU: 15421800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-180mm-sku-15421800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 160mm SKU: 15421600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-160mm-sku-15421600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 140mm SKU: 15421400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-140mm-sku-15421400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 125mm SKU: 15421200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-125mm-sku-15421200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 112mm SKU: 15421100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-112mm-sku-15421100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 100mm SKU: 15421000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-100mm-sku-15421000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 90mm SKU: 15420900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-90mm-sku-15420900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 80mm SKU: 15420800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-80mm-sku-15420800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 71mm SKU: 15420700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-71mm-sku-15420700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 315mm SKU: 15413100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-315mm-sku-15413100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 280mm SKU: 15412800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-280mm-sku-15412800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 250mm SKU: 15412500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-250mm-sku-15412500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 224mm SKU: 15412200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-224mm-sku-15412200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 200mm SKU: 15412000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-200mm-sku-15412000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 180mm SKU: 15411800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-180mm-sku-15411800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 160mm SKU: 15411600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-160mm-sku-15411600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 140mm SKU: 15411400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-140mm-sku-15411400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 125mm SKU: 15411200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-125mm-sku-15411200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 112mm SKU: 15411100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-112mm-sku-15411100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 100mm SKU: 15411000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-100mm-sku-15411000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 90mm SKU: 15410900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-90mm-sku-15410900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 80mm SKU: 15410800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-80mm-sku-15410800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 71mm SKU: 15410700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-71mm-sku-15410700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 63mm SKU: 15410600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-63mm-sku-15410600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material cast iron for taper-bush 3020 profile XPA, SPA and A (13) 3 grooves nominal diameter 315mm SKU: 15333100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-315mm-sku-15333100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 280mm SKU: 15332800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-280mm-sku-15332800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 250mm SKU: 15332500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-250mm-sku-15332500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 224mm SKU: 15332200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-224mm-sku-15332200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 200mm SKU: 15332000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-200mm-sku-15332000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 180mm SKU: 15331800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-180mm-sku-15331800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 160mm SKU: 15331600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-160mm-sku-15331600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 140mm SKU: 15331400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-140mm-sku-15331400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 3 grooves nominal diameter 125mm SKU: 15331200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-125mm-sku-15331200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 3 grooves nominal diameter 112mm SKU: 15331100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-112mm-sku-15331100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 3 grooves nominal diameter 100mm SKU: 15331000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-100mm-sku-15331000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 3 grooves nominal diameter 90mm SKU: 15330900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-90mm-sku-15330900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPA, SPA and A (13) 3 grooves nominal diameter 80mm SKU: 15330800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-80mm-sku-15330800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 315mm SKU: 15323100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-315mm-sku-15323100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 280mm SKU: 15322800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-280mm-sku-15322800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 250mm SKU: 15322500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-250mm-sku-15322500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 224mm SKU: 15322200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-224mm-sku-15322200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 200mm SKU: 15322000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-200mm-sku-15322000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 2 grooves nominal diameter 180mm SKU: 15321800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-180mm-sku-15321800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 2 grooves nominal diameter 160mm SKU: 15321600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-160mm-sku-15321600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 2 grooves nominal diameter 140mm SKU: 15321400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-140mm-sku-15321400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 2 grooves nominal diameter 125mm SKU: 15321200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-125mm-sku-15321200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 2 grooves nominal diameter 112mm SKU: 15321100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-112mm-sku-15321100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 2 grooves nominal diameter 100mm SKU: 15321000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-100mm-sku-15321000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 2 grooves nominal diameter 90mm SKU: 15320900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-90mm-sku-15320900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPA, SPA and A (13) 2 grooves nominal diameter 80mm SKU: 15320800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-80mm-sku-15320800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPA, SPA and A (13) 2 grooves nominal diameter 71mm SKU: 15320700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-71mm-sku-15320700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 315mm SKU: 15313100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-315mm-sku-15313100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 280mm SKU: 15312800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-280mm-sku-15312800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 250mm SKU: 15312500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-250mm-sku-15312500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 224mm SKU: 15312200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-224mm-sku-15312200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 200mm SKU: 15312000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-200mm-sku-15312000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 180mm SKU: 15311800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-180mm-sku-15311800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 160mm SKU: 15311600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-160mm-sku-15311600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 140mm SKU: 15311400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-140mm-sku-15311400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 125mm SKU: 15311200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-125mm-sku-15311200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt T2.5 width 6mm Lw 500 200 teeth 6 T2.5/500 SKU: 16061700](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-500-200-teeth-6-t2-5-500-sku-16061700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 480 192 teeth 6 T2.5/480 SKU: 16061500](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-480-192-teeth-6-t2-5-480-sku-16061500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 420 168 teeth 6 T2.5/420 SKU: 16061400](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-420-168-teeth-6-t2-5-420-sku-16061400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 380 152 teeth 6 T2.5/380 SKU: 16061300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-380-152-teeth-6-t2-5-380-sku-16061300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 330 132 teeth 6 T2.5/330 SKU: 16061200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-330-132-teeth-6-t2-5-330-sku-16061200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 317.5 127 teeth 6 T2.5/317.5 SKU: 16061100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-317-5-127-teeth-6-t2-5-317-5-sku-16061100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 305 122 teeth 6 T2.5/305 SKU: 16061000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-305-122-teeth-6-t2-5-305-sku-16061000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 285 114 teeth 6 T2.5/285 SKU: 16060900](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-285-114-teeth-6-t2-5-285-sku-16060900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 265 106 teeth 6 T2.5/265 SKU: 16060800](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-265-106-teeth-6-t2-5-265-sku-16060800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 245 98 teeth 6 T2.5/245 SKU: 16060700](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-245-98-teeth-6-t2-5-245-sku-16060700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 230 92 teeth 6 T2.5/230 SKU: 16060600](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-230-92-teeth-6-t2-5-230-sku-16060600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 200 80 teeth 6 T2.5/200 SKU: 16060500](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-200-80-teeth-6-t2-5-200-sku-16060500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 177.5mm 71 teeth 6 T2.5/177,5 SKU: 16060400](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-177-5mm-71-teeth-6-t2-5-1775-sku-16060400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 160mm 64 teeth 6 T2.5/160 SKU: 16060300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-160mm-64-teeth-6-t2-5-160-sku-16060300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 145mm 58 teeth 6 T2.5/145 SKU: 16060200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-145mm-58-teeth-6-t2-5-145-sku-16060200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 120mm 48 teeth 6 T2.5/120 SKU: 16060100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-120mm-48-teeth-6-t2-5-120-sku-16060100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm 6 T2.5 open length SKU: 16060000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-6-t2-5-open-length-sku-16060000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Timing belt pulley T2.5 material polyacetal resin 96 teeth for belt width 6mm SKU: 16059600](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-96-teeth-for-belt-width-6mm-sku-16059600/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 84 teeth for belt width 6mm SKU: 16058400](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-84-teeth-for-belt-width-6mm-sku-16058400/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 72 teeth for belt width 6mm SKU: 16057200](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-72-teeth-for-belt-width-6mm-sku-16057200/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 60 teeth for belt width 6mm SKU: 16056000](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-60-teeth-for-belt-width-6mm-sku-16056000/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 48 teeth for belt width 6mm SKU: 16054800](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-48-teeth-for-belt-width-6mm-sku-16054800/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 40 teeth for belt width 6mm SKU: 16054000](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-40-teeth-for-belt-width-6mm-sku-16054000/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 36 teeth for belt width 6mm SKU: 16053600](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-36-teeth-for-belt-width-6mm-sku-16053600/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 32 teeth for belt width 6mm SKU: 16053200](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-32-teeth-for-belt-width-6mm-sku-16053200/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 28 teeth for belt width 6mm SKU: 16052800](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-28-teeth-for-belt-width-6mm-sku-16052800/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 25 teeth for belt width 6mm SKU: 16052500](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-25-teeth-for-belt-width-6mm-sku-16052500/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 22 teeth for belt width 6mm SKU: 16052200](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-22-teeth-for-belt-width-6mm-sku-16052200/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 20 teeth for belt width 6mm SKU: 16052000](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-20-teeth-for-belt-width-6mm-sku-16052000/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 19 teeth for belt width 6mm SKU: 16051900](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-19-teeth-for-belt-width-6mm-sku-16051900/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 18 teeth for belt width 6mm SKU: 16051800](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-18-teeth-for-belt-width-6mm-sku-16051800/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 17 teeth for belt width 6mm SKU: 16051700](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-17-teeth-for-belt-width-6mm-sku-16051700/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 16 teeth for belt width 6mm SKU: 16051600](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-16-teeth-for-belt-width-6mm-sku-16051600/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 15 teeth for belt width 6mm SKU: 16051500](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-15-teeth-for-belt-width-6mm-sku-16051500/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 14 teeth for belt width 6mm SKU: 16051400](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-14-teeth-for-belt-width-6mm-sku-16051400/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 13 teeth for belt width 6mm SKU: 16051300](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-13-teeth-for-belt-width-6mm-sku-16051300/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 12 teeth for belt width 6mm SKU: 16051200](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-12-teeth-for-belt-width-6mm-sku-16051200/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material aluminium 96 teeth for belt width 10 mm 20 T2,5/96-0 SKU: 16039600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-96-teeth-for-belt-width-10-mm-20-t25-96-0-sku-16039600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 84 teeth for belt width 10 mm 20 T2,5/84-0 SKU: 16038400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-84-teeth-for-belt-width-10-mm-20-t25-84-0-sku-16038400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 72 teeth for belt width 10 mm 20 T2,5/72-0 SKU: 16037200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-72-teeth-for-belt-width-10-mm-20-t25-72-0-sku-16037200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 60 teeth for belt width 10mm 20 T2.5/60-0 SKU: 16036000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-60-teeth-for-belt-width-10mm-20-t2-5-60-0-sku-16036000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 48 teeth for belt width 10mm 20 T2.5/48-0 SKU: 16034800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-48-teeth-for-belt-width-10mm-20-t2-5-48-0-sku-16034800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 44 teeth for belt width 10mm 20 T2.5/44-0 SKU: 16034400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-44-teeth-for-belt-width-10mm-20-t2-5-44-0-sku-16034400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 40 teeth for belt width 10mm 20 T2.5/40-2 SKU: 16034000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-40-teeth-for-belt-width-10mm-20-t2-5-40-2-sku-16034000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 36 teeth for belt width 10mm 20 T2.5/36-2 SKU: 16033600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-36-teeth-for-belt-width-10mm-20-t2-5-36-2-sku-16033600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 32 teeth for belt width 10mm 20 T2.5/32-2 SKU: 16033200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-32-teeth-for-belt-width-10mm-20-t2-5-32-2-sku-16033200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 30 teeth for belt width 10mm 20 T2.5/30-2 SKU: 16033000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-30-teeth-for-belt-width-10mm-20-t2-5-30-2-sku-16033000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 28 teeth for belt width 10mm 20 T2.5/28-2 SKU: 16032800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-28-teeth-for-belt-width-10mm-20-t2-5-28-2-sku-16032800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 26 teeth for belt width 10mm 20 T2.5/26-2 SKU: 16032600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-26-teeth-for-belt-width-10mm-20-t2-5-26-2-sku-16032600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 25 teeth for belt width 10mm 20 T2.5/25-2 SKU: 16032500](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-25-teeth-for-belt-width-10mm-20-t2-5-25-2-sku-16032500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 24 teeth for belt width 10mm 20 T2.5/24-2 SKU: 16032400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-24-teeth-for-belt-width-10mm-20-t2-5-24-2-sku-16032400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 22 teeth for belt width 10mm 20 T2.5/22-2 SKU: 16032200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-22-teeth-for-belt-width-10mm-20-t2-5-22-2-sku-16032200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 20 teeth for belt width 10mm 20 T2.5/20-2 SKU: 16032000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-20-teeth-for-belt-width-10mm-20-t2-5-20-2-sku-16032000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 19 teeth for belt width 10mm 20 T2.5/19-2 SKU: 16031900](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-19-teeth-for-belt-width-10mm-20-t2-5-19-2-sku-16031900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 18 teeth for belt width 10mm 20 T2.5/18-2 SKU: 16031800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-18-teeth-for-belt-width-10mm-20-t2-5-18-2-sku-16031800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 17 teeth for belt width 10 mm 20 T2,5/17-2 SKU: 16031700](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-17-teeth-for-belt-width-10-mm-20-t25-17-2-sku-16031700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 16 teeth for belt width 10mm 20 T2.5/16-2 SKU: 16031600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-16-teeth-for-belt-width-10mm-20-t2-5-16-2-sku-16031600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 15 teeth for belt width 10mm 20 T2.5/15-2 SKU: 16031500](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-15-teeth-for-belt-width-10mm-20-t2-5-15-2-sku-16031500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 14 teeth for belt width 10mm 20 T2.5/14-2 SKU: 16031400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-14-teeth-for-belt-width-10mm-20-t2-5-14-2-sku-16031400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 13 teeth for belt width 10 mm 20 T2,5/13-2 SKU: 16031300](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-13-teeth-for-belt-width-10-mm-20-t25-13-2-sku-16031300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 12 teeth for belt width 10mm 20 T2.5/12-2 SKU: 16031200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-12-teeth-for-belt-width-10mm-20-t2-5-12-2-sku-16031200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 11 teeth for belt width 10mm 20 T2.5/11-2 SKU: 16031100](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-11-teeth-for-belt-width-10mm-20-t2-5-11-2-sku-16031100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 10 teeth for belt width 10mm 20 T2.5/10-2 SKU: 16031000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-10-teeth-for-belt-width-10mm-20-t2-5-10-2-sku-16031000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 96 teeth for belt width 6 mm 16 T2,5/96-0 SKU: 16029600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-96-teeth-for-belt-width-6-mm-16-t25-96-0-sku-16029600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 84 teeth for belt width 6 mm 16 T2,5/84-0 SKU: 16028400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-84-teeth-for-belt-width-6-mm-16-t25-84-0-sku-16028400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 72 teeth for belt width 6 mm 16 T2,5/72-0 SKU: 16027200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-72-teeth-for-belt-width-6-mm-16-t25-72-0-sku-16027200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 60 teeth for belt width 6mm 16 T2.5/60-0 SKU: 16026000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-60-teeth-for-belt-width-6mm-16-t2-5-60-0-sku-16026000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 48 teeth for belt width 6mm 16 T2.5/48-0 SKU: 16024800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-48-teeth-for-belt-width-6mm-16-t2-5-48-0-sku-16024800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 44 teeth for belt width 6mm 16 T2.5/44-0 SKU: 16024400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-44-teeth-for-belt-width-6mm-16-t2-5-44-0-sku-16024400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 40 teeth for belt width 6mm 16 T2.5/40-2 SKU: 16024000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-40-teeth-for-belt-width-6mm-16-t2-5-40-2-sku-16024000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 36 teeth for belt width 6mm 16 T2.5/36-2 SKU: 16023600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-36-teeth-for-belt-width-6mm-16-t2-5-36-2-sku-16023600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 32 teeth for belt width 6mm 16 T2.5/32-2 SKU: 16023200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-32-teeth-for-belt-width-6mm-16-t2-5-32-2-sku-16023200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 30 teeth for belt width 6mm 16 T2.5/30-2 SKU: 16023000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-30-teeth-for-belt-width-6mm-16-t2-5-30-2-sku-16023000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 28 teeth for belt width 6mm 16 T2.5/28-2 SKU: 16022800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-28-teeth-for-belt-width-6mm-16-t2-5-28-2-sku-16022800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 26 teeth for belt width 6mm 16 T2.5/26-2 SKU: 16022600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-26-teeth-for-belt-width-6mm-16-t2-5-26-2-sku-16022600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 25 teeth for belt width 6mm 16 T2.5/25-2 SKU: 16022500](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-25-teeth-for-belt-width-6mm-16-t2-5-25-2-sku-16022500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 24 teeth for belt width 6mm 16 T2.5/24-2 SKU: 16022400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-24-teeth-for-belt-width-6mm-16-t2-5-24-2-sku-16022400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 22 teeth for belt width 6mm 16 T2.5/22-2 SKU: 16022200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-22-teeth-for-belt-width-6mm-16-t2-5-22-2-sku-16022200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 20 teeth for belt width 6mm 16 T2.5/20-2 SKU: 16022000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-20-teeth-for-belt-width-6mm-16-t2-5-20-2-sku-16022000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 19 teeth for belt width 6mm 16 T2.5/19-2 SKU: 16021900](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-19-teeth-for-belt-width-6mm-16-t2-5-19-2-sku-16021900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 18 teeth for belt width 6mm 16 T2.5/18-2 SKU: 16021800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-18-teeth-for-belt-width-6mm-16-t2-5-18-2-sku-16021800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 17 teeth for belt width 6 mm 16 T2,5/17-2 SKU: 16021700](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-17-teeth-for-belt-width-6-mm-16-t25-17-2-sku-16021700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 16 teeth for belt width 6mm 16 T2.5/16-2 SKU: 16021600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-16-teeth-for-belt-width-6mm-16-t2-5-16-2-sku-16021600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 15 teeth for belt width 6mm 16 T2.5/15-2 SKU: 16021500](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-15-teeth-for-belt-width-6mm-16-t2-5-15-2-sku-16021500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 14 teeth for belt width 6mm 16 T2.5/14-2 SKU: 16021400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-14-teeth-for-belt-width-6mm-16-t2-5-14-2-sku-16021400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 13 teeth for belt width 6 mm 16 T2,5/13-2 SKU: 16021300](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-13-teeth-for-belt-width-6-mm-16-t25-13-2-sku-16021300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 12 teeth for belt width 6mm 16 T2.5/12-2 SKU: 16021200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-12-teeth-for-belt-width-6mm-16-t2-5-12-2-sku-16021200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 11 teeth for belt width 6mm 16 T2.5/11-2 SKU: 16021100](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-11-teeth-for-belt-width-6mm-16-t2-5-11-2-sku-16021100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 10 teeth for belt width 6mm 16 T2.5/10-2 SKU: 16021000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-10-teeth-for-belt-width-6mm-16-t2-5-10-2-sku-16021000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [V-belt pulley material cast iron for taper-bush 3020 profile XPB, SPB and B (17) 3 grooves nominal diameter 315mm SKU: 15533100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-315mm-sku-15533100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 3020 profile XPB, SPB and B (17) 3 grooves nominal diameter 280mm SKU: 15532800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-280mm-sku-15532800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 3020 profile XPB, SPB and B (17) 3 grooves nominal diameter 250mm SKU: 15532500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-250mm-sku-15532500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 3 grooves nominal diameter 224mm SKU: 15532200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-224mm-sku-15532200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 3 grooves nominal diameter 200mm SKU: 15532000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-200mm-sku-15532000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 3 grooves nominal diameter 180mm SKU: 15531800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-180mm-sku-15531800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 3 grooves nominal diameter 160mm SKU: 15531600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-160mm-sku-15531600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 3 grooves nominal diameter 140mm SKU: 15531400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-140mm-sku-15531400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 3 grooves nominal diameter 125mm SKU: 15531200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-125mm-sku-15531200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 3 grooves nominal diameter 112mm SKU: 15531100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-112mm-sku-15531100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 3 grooves nominal diameter 100mm SKU: 15531000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-100mm-sku-15531000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley T5 material aluminium 13 teeth for belt width 10 mm 21 T5/13-2 SKU: 16221300](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-13-teeth-for-belt-width-10-mm-21-t5-13-2-sku-16221300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 12 teeth for belt width 10mm 21 T5/12-2 SKU: 16221200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-12-teeth-for-belt-width-10mm-21-t5-12-2-sku-16221200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 11 teeth for belt width 10 mm 21 T5/11-2 SKU: 16221100](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-11-teeth-for-belt-width-10-mm-21-t5-11-2-sku-16221100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 10 teeth for belt width 10mm 21 T5/10-2 SKU: 16221000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-10-teeth-for-belt-width-10mm-21-t5-10-2-sku-16221000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 72 teeth for belt width 32 mm 46 T5/72-0 SKU: 16217200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-72-teeth-for-belt-width-32-mm-46-t5-72-0-sku-16217200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 60 teeth for belt width 32mm 46 T5/60-0 SKU: 16216000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-60-teeth-for-belt-width-32mm-46-t5-60-0-sku-16216000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 48 teeth for belt width 32mm 46 T5/48-0 SKU: 16214800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-48-teeth-for-belt-width-32mm-46-t5-48-0-sku-16214800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 44 teeth for belt width 32mm 46 T5/44-0 SKU: 16214400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-44-teeth-for-belt-width-32mm-46-t5-44-0-sku-16214400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 42 teeth for belt width 32mm 46 T5/42-2 SKU: 16214200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-42-teeth-for-belt-width-32mm-46-t5-42-2-sku-16214200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 40 teeth for belt width 32mm 46 T5/40-2 SKU: 16214000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-40-teeth-for-belt-width-32mm-46-t5-40-2-sku-16214000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 36 teeth for belt width 32mm 46 T5/36-2 SKU: 16213600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-36-teeth-for-belt-width-32mm-46-t5-36-2-sku-16213600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 32 teeth for belt width 32mm 46 T5/32-2 SKU: 16213200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-32-teeth-for-belt-width-32mm-46-t5-32-2-sku-16213200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 30 teeth for belt width 32mm 46 T5/30-2 SKU: 16213000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-30-teeth-for-belt-width-32mm-46-t5-30-2-sku-16213000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 28 teeth for belt width 32mm 46 T5/28-2 SKU: 16212800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-28-teeth-for-belt-width-32mm-46-t5-28-2-sku-16212800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 27 teeth for belt width 32mm 46 T5/27-2 SKU: 16212700](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-27-teeth-for-belt-width-32mm-46-t5-27-2-sku-16212700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 26 teeth for belt width 32mm 46 T5/26-2 SKU: 16212600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-26-teeth-for-belt-width-32mm-46-t5-26-2-sku-16212600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 25 teeth for belt width 32mm 46 T5/25-2 SKU: 16212500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-25-teeth-for-belt-width-32mm-46-t5-25-2-sku-16212500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 24 teeth for belt width 32mm 46 T5/24-2 SKU: 16212400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-24-teeth-for-belt-width-32mm-46-t5-24-2-sku-16212400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 22 teeth for belt width 32mm 46 T5/22-2 SKU: 16212200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-22-teeth-for-belt-width-32mm-46-t5-22-2-sku-16212200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 20 teeth for belt width 32mm 46 T5/20-2 SKU: 16212000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-20-teeth-for-belt-width-32mm-46-t5-20-2-sku-16212000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 19 teeth for belt width 32mm 46 T5/19-2 SKU: 16211900](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-19-teeth-for-belt-width-32mm-46-t5-19-2-sku-16211900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 18 teeth for belt width 32mm 46 T5/18-2 SKU: 16211800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-18-teeth-for-belt-width-32mm-46-t5-18-2-sku-16211800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 16 teeth for belt width 32mm 46 T5/16-2 SKU: 16211600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-16-teeth-for-belt-width-32mm-46-t5-16-2-sku-16211600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 15 teeth for belt width 32mm 46 T5/15-2 SKU: 16211500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-15-teeth-for-belt-width-32mm-46-t5-15-2-sku-16211500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 14 teeth for belt width 32mm 46 T5/14-2 SKU: 16211400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-14-teeth-for-belt-width-32mm-46-t5-14-2-sku-16211400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 13 teeth for belt width 32 mm 46 T5/13-2 SKU: 16211300](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-13-teeth-for-belt-width-32-mm-46-t5-13-2-sku-16211300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 12 teeth for belt width 32mm 46 T5/12-2 SKU: 16211200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-12-teeth-for-belt-width-32mm-46-t5-12-2-sku-16211200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 10 teeth for belt width 32mm 46 T5/10-2 SKU: 16211000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-10-teeth-for-belt-width-32mm-46-t5-10-2-sku-16211000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [timing bar T2.5 100 teeth length 160mm material aluminium SKU: 16099900](https://maedler.in/product/timing-bar-t2-5-100-teeth-length-160mm-material-aluminium-sku-16099900/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 96 teeth length 140mm material aluminium SKU: 16099600](https://maedler.in/product/timing-bar-t2-5-96-teeth-length-140mm-material-aluminium-sku-16099600/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 90 teeth length 160mm material aluminium SKU: 16099000](https://maedler.in/product/timing-bar-t2-5-90-teeth-length-160mm-material-aluminium-sku-16099000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 84 teeth length 160mm material aluminium SKU: 16098400](https://maedler.in/product/timing-bar-t2-5-84-teeth-length-160mm-material-aluminium-sku-16098400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 80 teeth length 160mm material aluminium SKU: 16098000](https://maedler.in/product/timing-bar-t2-5-80-teeth-length-160mm-material-aluminium-sku-16098000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 72 teeth length 160mm material aluminium SKU: 16097200](https://maedler.in/product/timing-bar-t2-5-72-teeth-length-160mm-material-aluminium-sku-16097200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 70 teeth length 160mm material aluminium SKU: 16097000](https://maedler.in/product/timing-bar-t2-5-70-teeth-length-160mm-material-aluminium-sku-16097000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 65 teeth length 160mm material aluminium SKU: 16096500](https://maedler.in/product/timing-bar-t2-5-65-teeth-length-160mm-material-aluminium-sku-16096500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 60 teeth length 160mm material aluminium SKU: 16096000](https://maedler.in/product/timing-bar-t2-5-60-teeth-length-160mm-material-aluminium-sku-16096000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 50 teeth length 160mm material aluminium SKU: 16095000](https://maedler.in/product/timing-bar-t2-5-50-teeth-length-160mm-material-aluminium-sku-16095000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 48 teeth length 140mm material aluminium SKU: 16094800](https://maedler.in/product/timing-bar-t2-5-48-teeth-length-140mm-material-aluminium-sku-16094800/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 45 teeth length 140mm material aluminium SKU: 16094500](https://maedler.in/product/timing-bar-t2-5-45-teeth-length-140mm-material-aluminium-sku-16094500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 44 teeth length 140mm material aluminium SKU: 16094400](https://maedler.in/product/timing-bar-t2-5-44-teeth-length-140mm-material-aluminium-sku-16094400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 42 teeth length 140mm material aluminium SKU: 16094200](https://maedler.in/product/timing-bar-t2-5-42-teeth-length-140mm-material-aluminium-sku-16094200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 40 teeth length 140mm material aluminium SKU: 16094000](https://maedler.in/product/timing-bar-t2-5-40-teeth-length-140mm-material-aluminium-sku-16094000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 38 teeth length 140mm material aluminium SKU: 16093800](https://maedler.in/product/timing-bar-t2-5-38-teeth-length-140mm-material-aluminium-sku-16093800/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 36 teeth length 140mm material aluminium SKU: 16093600](https://maedler.in/product/timing-bar-t2-5-36-teeth-length-140mm-material-aluminium-sku-16093600/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 35 teeth length 140mm material aluminium SKU: 16093500](https://maedler.in/product/timing-bar-t2-5-35-teeth-length-140mm-material-aluminium-sku-16093500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 34 teeth length 140mm material aluminium SKU: 16093400](https://maedler.in/product/timing-bar-t2-5-34-teeth-length-140mm-material-aluminium-sku-16093400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 32 teeth length 140mm material aluminium SKU: 16093200](https://maedler.in/product/timing-bar-t2-5-32-teeth-length-140mm-material-aluminium-sku-16093200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 30 teeth length 140mm material aluminium SKU: 16093000](https://maedler.in/product/timing-bar-t2-5-30-teeth-length-140mm-material-aluminium-sku-16093000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 29 teeth length 140mm material aluminium SKU: 16092900](https://maedler.in/product/timing-bar-t2-5-29-teeth-length-140mm-material-aluminium-sku-16092900/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 28 teeth length 140mm material aluminium SKU: 16092800](https://maedler.in/product/timing-bar-t2-5-28-teeth-length-140mm-material-aluminium-sku-16092800/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 27 teeth length 140mm material aluminium SKU: 16092700](https://maedler.in/product/timing-bar-t2-5-27-teeth-length-140mm-material-aluminium-sku-16092700/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 26 teeth length 140mm material aluminium SKU: 16092600](https://maedler.in/product/timing-bar-t2-5-26-teeth-length-140mm-material-aluminium-sku-16092600/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 25 teeth length 140mm material aluminium SKU: 16092500](https://maedler.in/product/timing-bar-t2-5-25-teeth-length-140mm-material-aluminium-sku-16092500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 24 teeth length 140mm material aluminium SKU: 16092400](https://maedler.in/product/timing-bar-t2-5-24-teeth-length-140mm-material-aluminium-sku-16092400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 23 teeth length 140mm material aluminium SKU: 16092300](https://maedler.in/product/timing-bar-t2-5-23-teeth-length-140mm-material-aluminium-sku-16092300/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 22 teeth length 140mm material aluminium SKU: 16092200](https://maedler.in/product/timing-bar-t2-5-22-teeth-length-140mm-material-aluminium-sku-16092200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 21 teeth length 120mm material aluminium SKU: 16092100](https://maedler.in/product/timing-bar-t2-5-21-teeth-length-120mm-material-aluminium-sku-16092100/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 20 teeth length 120mm material aluminium SKU: 16092000](https://maedler.in/product/timing-bar-t2-5-20-teeth-length-120mm-material-aluminium-sku-16092000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 19 teeth length 120mm material aluminium SKU: 16091900](https://maedler.in/product/timing-bar-t2-5-19-teeth-length-120mm-material-aluminium-sku-16091900/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 18 teeth length 75mm material aluminium SKU: 16091800](https://maedler.in/product/timing-bar-t2-5-18-teeth-length-75mm-material-aluminium-sku-16091800/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 17 teeth length 75mm material aluminium SKU: 16091700](https://maedler.in/product/timing-bar-t2-5-17-teeth-length-75mm-material-aluminium-sku-16091700/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 16 teeth length 75mm material aluminium SKU: 16091600](https://maedler.in/product/timing-bar-t2-5-16-teeth-length-75mm-material-aluminium-sku-16091600/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 15 teeth length 75mm material aluminium SKU: 16091500](https://maedler.in/product/timing-bar-t2-5-15-teeth-length-75mm-material-aluminium-sku-16091500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 14 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091400](https://maedler.in/product/timing-bar-t2-5-14-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 13 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091300](https://maedler.in/product/timing-bar-t2-5-13-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091300/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 12 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091200](https://maedler.in/product/timing-bar-t2-5-12-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 11 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091100](https://maedler.in/product/timing-bar-t2-5-11-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091100/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 10 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091000](https://maedler.in/product/timing-bar-t2-5-10-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091000/): Material: Aluminium similar EN AW2017A. - [Fixing plate for timing belts material aluminium T2.5 belt width 10mm SKU: 16079900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t2-5-belt-width-10mm-sku-16079900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T2.5 width 10mm Lw 950mm 380 teeth 10 T2,5/950 SKU: 16072300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-950mm-380-teeth-10-t25-950-sku-16072300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 915mm 366 teeth 10 T2,5/915 SKU: 16072200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-915mm-366-teeth-10-t25-915-sku-16072200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 780mm 312 teeth 10 T2.5/780 SKU: 16072100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-780mm-312-teeth-10-t2-5-780-sku-16072100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 650mm 260 teeth 10 T2.5/650 SKU: 16072000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-650mm-260-teeth-10-t2-5-650-sku-16072000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 620mm 248 teeth 10 T2,5/620 SKU: 16071900](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-620mm-248-teeth-10-t25-620-sku-16071900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 600mm 240 teeth 10 T2.5/600 SKU: 16071800](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-600mm-240-teeth-10-t2-5-600-sku-16071800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 500mm 200 teeth 10 T2.5/500 SKU: 16071700](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-500mm-200-teeth-10-t2-5-500-sku-16071700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 480mm 192 teeth 10 T2.5/480 SKU: 16071500](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-480mm-192-teeth-10-t2-5-480-sku-16071500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 420mm 168 teeth 10 T2.5/420 SKU: 16071400](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-420mm-168-teeth-10-t2-5-420-sku-16071400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 380mm 152 teeth 10 T2.5/380 SKU: 16071300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-380mm-152-teeth-10-t2-5-380-sku-16071300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 330mm 132 teeth 10 T2.5/330 SKU: 16071200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-330mm-132-teeth-10-t2-5-330-sku-16071200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 317.5mm 127 teeth 10 T2.5/317.5 SKU: 16071100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-317-5mm-127-teeth-10-t2-5-317-5-sku-16071100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 305mm 122 teeth 10 T2.5/305 SKU: 16071000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-305mm-122-teeth-10-t2-5-305-sku-16071000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 285mm 114 teeth 10 T2.5/285 SKU: 16070900](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-285mm-114-teeth-10-t2-5-285-sku-16070900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 265mm 106 teeth 10 T2.5/265 SKU: 16070800](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-265mm-106-teeth-10-t2-5-265-sku-16070800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 245mm 98 teeth 10 T2.5/245 SKU: 16070700](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-245mm-98-teeth-10-t2-5-245-sku-16070700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 230mm 92 teeth 10 T2.5/230 SKU: 16070600](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-230mm-92-teeth-10-t2-5-230-sku-16070600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 200mm 80 teeth 10 T2.5/200 SKU: 16070500](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-200mm-80-teeth-10-t2-5-200-sku-16070500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 177.5mm 71 teeth 10 T2.5/177,5 SKU: 16070400](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-177-5mm-71-teeth-10-t2-5-1775-sku-16070400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 160mm 64 teeth 10 T2.5/160 SKU: 16070300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-160mm-64-teeth-10-t2-5-160-sku-16070300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 145mm 58 teeth 10 T2.5/145 SKU: 16070200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-145mm-58-teeth-10-t2-5-145-sku-16070200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 120mm 48 teeth 10 T2.5/120 SKU: 16070100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-120mm-48-teeth-10-t2-5-120-sku-16070100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm 10 T2.5 open length SKU: 16070000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-10-t2-5-open-length-sku-16070000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T2.5 belt width 6mm SKU: 16069900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t2-5-belt-width-6mm-sku-16069900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T2.5 width 6mm Lw 950 380 teeth 6 T2,5/950 SKU: 16062300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-950-380-teeth-6-t25-950-sku-16062300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 915 366 teeth 6 T2,5/915 SKU: 16062200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-915-366-teeth-6-t25-915-sku-16062200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 780 312 teeth 6 T2.5/780 SKU: 16062100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-780-312-teeth-6-t2-5-780-sku-16062100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 650 260 teeth 6 T2.5/650 SKU: 16062000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-650-260-teeth-6-t2-5-650-sku-16062000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 620 248 teeth 6 T2,5/620 SKU: 16061900](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-620-248-teeth-6-t25-620-sku-16061900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 600 240 teeth 6 T2.5/600 SKU: 16061800](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-600-240-teeth-6-t2-5-600-sku-16061800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 14H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-14h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 12H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-12h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 40 teeth for belt width 10mm 21 T5/40-2 SKU: 16224000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-40-teeth-for-belt-width-10mm-21-t5-40-2-sku-16224000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 25H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-25h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 20H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-20h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 16H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-16h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 15H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-15h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 14H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-14h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 12H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-12h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 36 teeth for belt width 10mm 21 T5/36-2 SKU: 16223600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-36-teeth-for-belt-width-10mm-21-t5-36-2-sku-16223600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 25H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-25h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 20H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-20h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 16H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-16h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 15H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-15h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 14H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-14h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 12H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-12h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 10H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-10h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 32 teeth for belt width 10mm 21 T5/32-2 SKU: 16223200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-32-teeth-for-belt-width-10mm-21-t5-32-2-sku-16223200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 20H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-20h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 16H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-16h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 15H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-15h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 14H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-14h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 12H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-12h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 10H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-10h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 30 teeth for belt width 10mm 21 T5/30-2 SKU: 16223000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-30-teeth-for-belt-width-10mm-21-t5-30-2-sku-16223000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 20H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-20h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 16H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-16h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 15H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-15h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 14H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-14h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 12H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-12h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 10H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-10h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 8H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-8h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 28 teeth for belt width 10mm 21 T5/28-2 SKU: 16222800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-28-teeth-for-belt-width-10mm-21-t5-28-2-sku-16222800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 16H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-16h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 15H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-15h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 14H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-14h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 12H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-12h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 10H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-10h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 8H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-8h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 27 teeth for belt width 10mm 21 T5/27-2 SKU: 16222700](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-27-teeth-for-belt-width-10mm-21-t5-27-2-sku-16222700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 16H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-16h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 15H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-15h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 14H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-14h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 12H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-12h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 10H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-10h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 8H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-8h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 26 teeth for belt width 10mm 21 T5/26-2 SKU: 16222600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-26-teeth-for-belt-width-10mm-21-t5-26-2-sku-16222600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 14H7 for belt width 10mm ALK28T5/26-2 SKU: 162226K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-14h7-for-belt-width-10mm-alk28t5-26-2-sku-162226k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 12H7 for belt width 10mm ALK28T5/26-2 SKU: 162226K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-12h7-for-belt-width-10mm-alk28t5-26-2-sku-162226k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 10H7 for belt width 10mm ALK28T5/26-2 SKU: 162226K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-10h7-for-belt-width-10mm-alk28t5-26-2-sku-162226k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 8H7 for belt width 10mm ALK28T5/26-2 SKU: 162226K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-8h7-for-belt-width-10mm-alk28t5-26-2-sku-162226k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 25 teeth for belt width 10mm 21 T5/25-2 SKU: 16222500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-25-teeth-for-belt-width-10mm-21-t5-25-2-sku-16222500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 14H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-14h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 12H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-12h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 10H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-10h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 8H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-8h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 6H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-6h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 24 teeth for belt width 10mm 21 T5/24-2 SKU: 16222400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-24-teeth-for-belt-width-10mm-21-t5-24-2-sku-16222400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 12H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-12h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 10H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-10h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 8H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-8h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 6H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-6h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 5H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-5h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 22 teeth for belt width 10mm 21 T5/22-2 SKU: 16222200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-22-teeth-for-belt-width-10mm-21-t5-22-2-sku-16222200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 12H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-12h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 10H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-10h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 8H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-8h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 6H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-6h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 5H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-5h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 4H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-4h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 20 teeth for belt width 10mm 21 T5/20-2 SKU: 16222000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-20-teeth-for-belt-width-10mm-21-t5-20-2-sku-16222000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 10H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-10h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 8H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-8h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 6H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-6h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 5H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-5h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 4H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-4h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 19 teeth for belt width 10mm 21 T5/19-2 SKU: 16221900](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-19-teeth-for-belt-width-10mm-21-t5-19-2-sku-16221900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 10H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-10h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 8H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-8h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 6H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-6h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 5H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-5h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 4H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-4h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 18 teeth for belt width 10mm 21 T5/18-2 SKU: 16221800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-18-teeth-for-belt-width-10mm-21-t5-18-2-sku-16221800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 8H7 for belt width 10mm ALK23T5/18-2 SKU: 162218K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-8h7-for-belt-width-10mm-alk23t5-18-2-sku-162218k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 6H7 for belt width 10mm ALK23T5/18-2 SKU: 162218K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-6h7-for-belt-width-10mm-alk23t5-18-2-sku-162218k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 5H7 for belt width 10mm ALK23T5/18-2 SKU: 162218K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-5h7-for-belt-width-10mm-alk23t5-18-2-sku-162218k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 4H7 for belt width 10mm ALK23T5/18-2 SKU: 162218K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-4h7-for-belt-width-10mm-alk23t5-18-2-sku-162218k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 16 teeth for belt width 10mm 21 T5/16-2 SKU: 16221600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-16-teeth-for-belt-width-10mm-21-t5-16-2-sku-16221600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 8H7 for belt width 10mm ALK23T5/16-2 SKU: 162216K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-8h7-for-belt-width-10mm-alk23t5-16-2-sku-162216k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 6H7 for belt width 10mm ALK23T5/16-2 SKU: 162216K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-6h7-for-belt-width-10mm-alk23t5-16-2-sku-162216k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 5H7 for belt width 10mm ALK23T5/16-2 SKU: 162216K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-5h7-for-belt-width-10mm-alk23t5-16-2-sku-162216k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 4H7 for belt width 10mm ALK23T5/16-2 SKU: 162216K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-4h7-for-belt-width-10mm-alk23t5-16-2-sku-162216k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 15 teeth for belt width 10mm 21 T5/15-2 SKU: 16221500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-15-teeth-for-belt-width-10mm-21-t5-15-2-sku-16221500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 6H7 for belt width 10mm ALK23T5/15-2 SKU: 162215K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-6h7-for-belt-width-10mm-alk23t5-15-2-sku-162215k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 5H7 for belt width 10mm ALK23T5/15-2 SKU: 162215K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-5h7-for-belt-width-10mm-alk23t5-15-2-sku-162215k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 4H7 for belt width 10mm ALK23T5/15-2 SKU: 162215K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-4h7-for-belt-width-10mm-alk23t5-15-2-sku-162215k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 14 teeth for belt width 10mm 21 T5/14-2 SKU: 16221400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-14-teeth-for-belt-width-10mm-21-t5-14-2-sku-16221400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 6H7 for belt width 10mm ALK23T5/14-2 SKU: 162214K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-6h7-for-belt-width-10mm-alk23t5-14-2-sku-162214k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 5H7 for belt width 10mm ALK23T5/14-2 SKU: 162214K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-5h7-for-belt-width-10mm-alk23t5-14-2-sku-162214k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 4H7 for belt width 10mm ALK23T5/14-2 SKU: 162214K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-4h7-for-belt-width-10mm-alk23t5-14-2-sku-162214k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 15H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-15h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 14H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-14h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 12H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-12h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 10H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-10h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 8H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-8h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 28 teeth for belt width 16mm 27 T5/28-2 SKU: 16232800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-28-teeth-for-belt-width-16mm-27-t5-28-2-sku-16232800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 16H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-16h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 15H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-15h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 14H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-14h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 12H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-12h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 10H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-10h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 8H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-8h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 27 teeth for belt width 16mm 27 T5/27-2 SKU: 16232700](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-27-teeth-for-belt-width-16mm-27-t5-27-2-sku-16232700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 16H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-16h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 15H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-15h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 14H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-14h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 12H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-12h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 10H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-10h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 8H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-8h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 26 teeth for belt width 16mm 27 T5/26-2 SKU: 16232600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-26-teeth-for-belt-width-16mm-27-t5-26-2-sku-16232600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 14H7 for belt width 16mm ALK34T5/26-2 SKU: 162326K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-14h7-for-belt-width-16mm-alk34t5-26-2-sku-162326k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 12H7 for belt width 16mm ALK34T5/26-2 SKU: 162326K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-12h7-for-belt-width-16mm-alk34t5-26-2-sku-162326k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 10H7 for belt width 16mm ALK34T5/26-2 SKU: 162326K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-10h7-for-belt-width-16mm-alk34t5-26-2-sku-162326k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 8H7 for belt width 16mm ALK34T5/26-2 SKU: 162326K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-8h7-for-belt-width-16mm-alk34t5-26-2-sku-162326k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 25 teeth for belt width 16mm 27 T5/25-2 SKU: 16232500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-25-teeth-for-belt-width-16mm-27-t5-25-2-sku-16232500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 14H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-14h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 12H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-12h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 10H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-10h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 8H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-8h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 6H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-6h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 24 teeth for belt width 16mm 27 T5/24-2 SKU: 16232400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-24-teeth-for-belt-width-16mm-27-t5-24-2-sku-16232400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 12H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-12h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 10H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-10h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 8H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-8h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 6H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-6h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 5H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-5h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 22 teeth for belt width 16mm 27 T5/22-2 SKU: 16232200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-22-teeth-for-belt-width-16mm-27-t5-22-2-sku-16232200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 12H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-12h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 10H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-10h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 8H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-8h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 6H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-6h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 5H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-5h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 4H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-4h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 20 teeth for belt width 16mm 27 T5/20-2 SKU: 16232000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-20-teeth-for-belt-width-16mm-27-t5-20-2-sku-16232000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 10H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-10h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 8H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-8h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 6H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-6h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 5H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-5h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 4H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-4h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 19 teeth for belt width 16mm 27 T5/19-2 SKU: 16231900](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-19-teeth-for-belt-width-16mm-27-t5-19-2-sku-16231900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 10H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-10h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 8H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-8h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 6H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-6h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 5H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-5h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 4H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-4h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 18 teeth for belt width 16mm 27 T5/18-2 SKU: 16231800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-18-teeth-for-belt-width-16mm-27-t5-18-2-sku-16231800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 8H7 for belt width 16mm ALK29T5/18-2 SKU: 162318K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-8h7-for-belt-width-16mm-alk29t5-18-2-sku-162318k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 6H7 for belt width 16mm ALK29T5/18-2 SKU: 162318K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-6h7-for-belt-width-16mm-alk29t5-18-2-sku-162318k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 5H7 for belt width 16mm ALK29T5/18-2 SKU: 162318K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-5h7-for-belt-width-16mm-alk29t5-18-2-sku-162318k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 4H7 for belt width 16mm ALK29T5/18-2 SKU: 162318K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-4h7-for-belt-width-16mm-alk29t5-18-2-sku-162318k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 16 teeth for belt width 16mm 27 T5/16-2 SKU: 16231600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-16-teeth-for-belt-width-16mm-27-t5-16-2-sku-16231600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 8H7 for belt width 16mm ALK29T5/16-2 SKU: 162316K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-8h7-for-belt-width-16mm-alk29t5-16-2-sku-162316k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 6H7 for belt width 16mm ALK29T5/16-2 SKU: 162316K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-6h7-for-belt-width-16mm-alk29t5-16-2-sku-162316k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 5H7 for belt width 16mm ALK29T5/16-2 SKU: 162316K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-5h7-for-belt-width-16mm-alk29t5-16-2-sku-162316k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 4H7 for belt width 16mm ALK29T5/16-2 SKU: 162316K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-4h7-for-belt-width-16mm-alk29t5-16-2-sku-162316k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 15 teeth for belt width 16mm 27 T5/15-2 SKU: 16231500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-15-teeth-for-belt-width-16mm-27-t5-15-2-sku-16231500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 6H7 for belt width 16mm ALK29T5/15-2 SKU: 162315K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-6h7-for-belt-width-16mm-alk29t5-15-2-sku-162315k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 5H7 for belt width 16mm ALK29T5/15-2 SKU: 162315K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-5h7-for-belt-width-16mm-alk29t5-15-2-sku-162315k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 4H7 for belt width 16mm ALK29T5/15-2 SKU: 162315K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-4h7-for-belt-width-16mm-alk29t5-15-2-sku-162315k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 14 teeth for belt width 16mm 27 T5/14-2 SKU: 16231400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-14-teeth-for-belt-width-16mm-27-t5-14-2-sku-16231400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 6H7 for belt width 16mm ALK29T5/14-2 SKU: 162314K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-6h7-for-belt-width-16mm-alk29t5-14-2-sku-162314k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 5H7 for belt width 16mm ALK29T5/14-2 SKU: 162314K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-5h7-for-belt-width-16mm-alk29t5-14-2-sku-162314k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 4H7 for belt width 16mm ALK29T5/14-2 SKU: 162314K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-4h7-for-belt-width-16mm-alk29t5-14-2-sku-162314k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 13 teeth for belt width 16 mm 27 T5/13-2 SKU: 16231300](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-13-teeth-for-belt-width-16-mm-27-t5-13-2-sku-16231300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 12 teeth for belt width 16mm 27 T5/12-2 SKU: 16231200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-12-teeth-for-belt-width-16mm-27-t5-12-2-sku-16231200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 11 teeth for belt width 16 mm 27 T5/11-2 SKU: 16231100](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-11-teeth-for-belt-width-16-mm-27-t5-11-2-sku-16231100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 10 teeth for belt width 16mm 27 T5/10-2 SKU: 16231000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-10-teeth-for-belt-width-16mm-27-t5-10-2-sku-16231000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 96 teeth for belt width 10 mm 21 T5/96-0 SKU: 16229600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-96-teeth-for-belt-width-10-mm-21-t5-96-0-sku-16229600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 84 teeth for belt width 10 mm 21 T5/84-0 SKU: 16228400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-84-teeth-for-belt-width-10-mm-21-t5-84-0-sku-16228400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 72 teeth for belt width 10 mm 21 T5/72-0 SKU: 16227200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-72-teeth-for-belt-width-10-mm-21-t5-72-0-sku-16227200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 60 teeth for belt width 10mm 21 T5/60-0 SKU: 16226000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-60-teeth-for-belt-width-10mm-21-t5-60-0-sku-16226000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 25H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-25h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 20H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-20h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 16H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-16h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 15H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-15h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 14H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-14h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 12H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-12h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 48 teeth for belt width 10mm 21 T5/48-0 SKU: 16224800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-48-teeth-for-belt-width-10mm-21-t5-48-0-sku-16224800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 25H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-25h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 20H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-20h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 16H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-16h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 15H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-15h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 14H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-14h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 12H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-12h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 44 teeth for belt width 10mm 21 T5/44-0 SKU: 16224400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-44-teeth-for-belt-width-10mm-21-t5-44-0-sku-16224400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 42 teeth for belt width 10mm 21 T5/42-2 SKU: 16224200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-42-teeth-for-belt-width-10mm-21-t5-42-2-sku-16224200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 25H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-25h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 20H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-20h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 16H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-16h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 15H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-15h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Polyurethane timing belt T5 width 10mm Lw 185mm 37 teeth 10 T5/185 SKU: 16260200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-185mm-37-teeth-10-t5-185-sku-16260200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 165mm 33 teeth 10 T5/165 SKU: 16260100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-165mm-33-teeth-10-t5-165-sku-16260100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm 10T5 open length PAZ = Polyamide fabric on tooth side SKU: 16260001](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-10t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16260001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 10mm 10T5 open length SKU: 16260000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-10t5-open-length-sku-16260000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Timing belt pulley T5 material polyacetal resin 84 teeth for belt width 10mm SKU: 16258400](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-84-teeth-for-belt-width-10mm-sku-16258400/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 72 teeth for belt width 10mm SKU: 16257200](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-72-teeth-for-belt-width-10mm-sku-16257200/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 60 teeth for belt width 10mm SKU: 16256000](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-60-teeth-for-belt-width-10mm-sku-16256000/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 48 teeth for belt width 10mm SKU: 16254800](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-48-teeth-for-belt-width-10mm-sku-16254800/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 40 teeth for belt width 10mm SKU: 16254000](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-40-teeth-for-belt-width-10mm-sku-16254000/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 36 teeth for belt width 10mm SKU: 16253600](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-36-teeth-for-belt-width-10mm-sku-16253600/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 32 teeth for belt width 10mm SKU: 16253200](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-32-teeth-for-belt-width-10mm-sku-16253200/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 28 teeth for belt width 10mm SKU: 16252800](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-28-teeth-for-belt-width-10mm-sku-16252800/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 25 teeth for belt width 10mm SKU: 16252500](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-25-teeth-for-belt-width-10mm-sku-16252500/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 22 teeth for belt width 10mm SKU: 16252200](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-22-teeth-for-belt-width-10mm-sku-16252200/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 20 teeth for belt width 10mm SKU: 16252000](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-20-teeth-for-belt-width-10mm-sku-16252000/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 19 teeth for belt width 10mm SKU: 16251900](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-19-teeth-for-belt-width-10mm-sku-16251900/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 18 teeth for belt width 10mm SKU: 16251800](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-18-teeth-for-belt-width-10mm-sku-16251800/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 17 teeth for belt width 10mm SKU: 16251700](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-17-teeth-for-belt-width-10mm-sku-16251700/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 16 teeth for belt width 10mm SKU: 16251600](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-16-teeth-for-belt-width-10mm-sku-16251600/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 15 teeth for belt width 10mm SKU: 16251500](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-15-teeth-for-belt-width-10mm-sku-16251500/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 14 teeth for belt width 10mm SKU: 16251400](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-14-teeth-for-belt-width-10mm-sku-16251400/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 13 teeth for belt width 10mm SKU: 16251300](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-13-teeth-for-belt-width-10mm-sku-16251300/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 12 teeth for belt width 10mm SKU: 16251200](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-12-teeth-for-belt-width-10mm-sku-16251200/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material aluminium 96 teeth for belt width 25 mm 36 T5/96-0 SKU: 16249600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-96-teeth-for-belt-width-25-mm-36-t5-96-0-sku-16249600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 84 teeth for belt width 25 mm 36 T5/84-0 SKU: 16248400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-84-teeth-for-belt-width-25-mm-36-t5-84-0-sku-16248400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 72 teeth for belt width 25 mm 36 T5/72-0 SKU: 16247200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-72-teeth-for-belt-width-25-mm-36-t5-72-0-sku-16247200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 60 teeth for belt width 25mm 36 T5/60-0 SKU: 16246000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-60-teeth-for-belt-width-25mm-36-t5-60-0-sku-16246000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 48 teeth for belt width 25mm 36 T5/48-0 SKU: 16244800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-48-teeth-for-belt-width-25mm-36-t5-48-0-sku-16244800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 44 teeth for belt width 25mm 36 T5/44-0 SKU: 16244400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-44-teeth-for-belt-width-25mm-36-t5-44-0-sku-16244400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 42 teeth for belt width 25mm 36 T5/42-2 SKU: 16244200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-42-teeth-for-belt-width-25mm-36-t5-42-2-sku-16244200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 40 teeth for belt width 25mm 36 T5/40-2 SKU: 16244000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-40-teeth-for-belt-width-25mm-36-t5-40-2-sku-16244000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 36 teeth for belt width 25mm 36 T5/36-2 SKU: 16243600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-36-teeth-for-belt-width-25mm-36-t5-36-2-sku-16243600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 32 teeth for belt width 25mm 36 T5/32-2 SKU: 16243200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-32-teeth-for-belt-width-25mm-36-t5-32-2-sku-16243200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 30 teeth for belt width 25mm 36 T5/30-2 SKU: 16243000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-30-teeth-for-belt-width-25mm-36-t5-30-2-sku-16243000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 28 teeth for belt width 25mm 36 T5/28-2 SKU: 16242800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-28-teeth-for-belt-width-25mm-36-t5-28-2-sku-16242800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 27 teeth for belt width 25mm 36 T5/27-2 SKU: 16242700](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-27-teeth-for-belt-width-25mm-36-t5-27-2-sku-16242700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 26 teeth for belt width 25mm 36 T5/26-2 SKU: 16242600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-26-teeth-for-belt-width-25mm-36-t5-26-2-sku-16242600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 25 teeth for belt width 25mm 36 T5/25-2 SKU: 16242500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-25-teeth-for-belt-width-25mm-36-t5-25-2-sku-16242500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 24 teeth for belt width 25mm 36 T5/24-2 SKU: 16242400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-24-teeth-for-belt-width-25mm-36-t5-24-2-sku-16242400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 22 teeth for belt width 25mm 36 T5/22-2 SKU: 16242200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-22-teeth-for-belt-width-25mm-36-t5-22-2-sku-16242200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 20 teeth for belt width 25mm 36 T5/20-2 SKU: 16242000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-20-teeth-for-belt-width-25mm-36-t5-20-2-sku-16242000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 19 teeth for belt width 25mm 36 T5/19-2 SKU: 16241900](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-19-teeth-for-belt-width-25mm-36-t5-19-2-sku-16241900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 18 teeth for belt width 25mm 36 T5/18-2 SKU: 16241800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-18-teeth-for-belt-width-25mm-36-t5-18-2-sku-16241800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 16 teeth for belt width 25mm 36 T5/16-2 SKU: 16241600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-16-teeth-for-belt-width-25mm-36-t5-16-2-sku-16241600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 15 teeth for belt width 25mm 36 T5/15-2 SKU: 16241500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-15-teeth-for-belt-width-25mm-36-t5-15-2-sku-16241500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 14 teeth for belt width 25mm 36 T5/14-2 SKU: 16241400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-14-teeth-for-belt-width-25mm-36-t5-14-2-sku-16241400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 13 teeth for belt width 25 mm 36 T5/13-2 SKU: 16241300](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-13-teeth-for-belt-width-25-mm-36-t5-13-2-sku-16241300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 12 teeth for belt width 25mm 36 T5/12-2 SKU: 16241200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-12-teeth-for-belt-width-25mm-36-t5-12-2-sku-16241200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 11 teeth for belt width 25 mm 36 T5/11-2 SKU: 16241100](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-11-teeth-for-belt-width-25-mm-36-t5-11-2-sku-16241100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 10 teeth for belt width 25mm 36 T5/10-2 SKU: 16241000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-10-teeth-for-belt-width-25mm-36-t5-10-2-sku-16241000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 96 teeth for belt width 16 mm 27 T5/96-0 SKU: 16239600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-96-teeth-for-belt-width-16-mm-27-t5-96-0-sku-16239600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 84 teeth for belt width 16 mm 27 T5/84-0 SKU: 16238400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-84-teeth-for-belt-width-16-mm-27-t5-84-0-sku-16238400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 72 teeth for belt width 16 mm 27 T5/72-0 SKU: 16237200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-72-teeth-for-belt-width-16-mm-27-t5-72-0-sku-16237200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 60 teeth for belt width 16mm 27 T5/60-0 SKU: 16236000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-60-teeth-for-belt-width-16mm-27-t5-60-0-sku-16236000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 25H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-25h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 20H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-20h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 16H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-16h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 15H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-15h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 14H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-14h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 12H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-12h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 48 teeth for belt width 16mm 27 T5/48-0 SKU: 16234800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-48-teeth-for-belt-width-16mm-27-t5-48-0-sku-16234800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 25H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-25h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 20H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-20h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 16H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-16h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 15H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-15h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 14H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-14h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 12H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-12h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 44 teeth for belt width 16mm 27 T5/44-0 SKU: 16234400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-44-teeth-for-belt-width-16mm-27-t5-44-0-sku-16234400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 42 teeth for belt width 16mm 27 T5/42-2 SKU: 16234200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-42-teeth-for-belt-width-16mm-27-t5-42-2-sku-16234200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 25H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-25h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 20H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-20h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 16H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-16h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 15H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-15h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 14H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-14h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 12H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-12h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 40 teeth for belt width 16mm 27 T5/40-2 SKU: 16234000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-40-teeth-for-belt-width-16mm-27-t5-40-2-sku-16234000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 25H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-25h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 20H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-20h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 16H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-16h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 15H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-15h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 14H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-14h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 12H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-12h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 36 teeth for belt width 16mm 27 T5/36-2 SKU: 16233600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-36-teeth-for-belt-width-16mm-27-t5-36-2-sku-16233600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 25H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-25h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 20H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-20h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 16H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-16h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 15H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-15h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 14H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-14h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 12H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-12h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 10H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-10h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 32 teeth for belt width 16mm 27 T5/32-2 SKU: 16233200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-32-teeth-for-belt-width-16mm-27-t5-32-2-sku-16233200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 20H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-20h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 16H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-16h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 15H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-15h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 14H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-14h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 12H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-12h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 10H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-10h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 30 teeth for belt width 16mm 27 T5/30-2 SKU: 16233000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-30-teeth-for-belt-width-16mm-27-t5-30-2-sku-16233000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 20H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-20h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 16H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-16h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Polyurethane timing belt T5 width 16mm Lw 510mm 102 teeth 16 T5/510 SKU: 16273500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-510mm-102-teeth-16-t5-510-sku-16273500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 500mm 100 teeth 16 T5/500 SKU: 16273400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-500mm-100-teeth-16-t5-500-sku-16273400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 480mm 96 teeth 16 T5/480 SKU: 16273300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-480mm-96-teeth-16-t5-480-sku-16273300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 475mm 95 teeth 16 T5/475 SKU: 16273200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-475mm-95-teeth-16-t5-475-sku-16273200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 465mm 93 teeth 16 T5/465 SKU: 16273100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-465mm-93-teeth-16-t5-465-sku-16273100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 455mm 91 teeth 16 T5/455 SKU: 16273000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-455mm-91-teeth-16-t5-455-sku-16273000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 450mm 90 teeth 16 T5/450 SKU: 16272900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-450mm-90-teeth-16-t5-450-sku-16272900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 425mm 85 teeth 16 T5/425 SKU: 16272800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-425mm-85-teeth-16-t5-425-sku-16272800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 420mm 84 teeth 16 T5/420 SKU: 16272700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-420mm-84-teeth-16-t5-420-sku-16272700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 410mm 82 teeth 16 T5/410 SKU: 16272600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-410mm-82-teeth-16-t5-410-sku-16272600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 400mm 80 teeth 16 T5/400 SKU: 16272500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-400mm-80-teeth-16-t5-400-sku-16272500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 390mm 78 teeth 16 T5/390 SKU: 16272400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-390mm-78-teeth-16-t5-390-sku-16272400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 375mm 75 teeth 16 T5/375 SKU: 16272300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-375mm-75-teeth-16-t5-375-sku-16272300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 365mm 73 teeth 16 T5/365 SKU: 16272200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-365mm-73-teeth-16-t5-365-sku-16272200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 355mm 71 teeth 16 T5/355 SKU: 16272100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-355mm-71-teeth-16-t5-355-sku-16272100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 350mm 70 teeth 16 T5/350 SKU: 16272000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-350mm-70-teeth-16-t5-350-sku-16272000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 340mm 68 teeth 16 T5/340 SKU: 16271900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-340mm-68-teeth-16-t5-340-sku-16271900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 330mm 66 teeth 16 T5/330 SKU: 16271800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-330mm-66-teeth-16-t5-330-sku-16271800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 325mm 65 teeth 16 T5/325 SKU: 16271700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-325mm-65-teeth-16-t5-325-sku-16271700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 305mm 61 teeth 16 T5/305 SKU: 16271600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-305mm-61-teeth-16-t5-305-sku-16271600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 300mm 60 teeth 16 T5/300 SKU: 16271500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-300mm-60-teeth-16-t5-300-sku-16271500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 295mm 59 teeth 16 T5/295 SKU: 16271400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-295mm-59-teeth-16-t5-295-sku-16271400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 280mm 56 teeth 16 T5/280 SKU: 16271300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-280mm-56-teeth-16-t5-280-sku-16271300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 275mm 55 teeth 16 T5/275 SKU: 16271200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-275mm-55-teeth-16-t5-275-sku-16271200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 270mm 54 teeth 16 T5/270 SKU: 16271100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-270mm-54-teeth-16-t5-270-sku-16271100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 260mm 52 teeth 16 T5/260 SKU: 16271000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-260mm-52-teeth-16-t5-260-sku-16271000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 255mm 51 teeth 16 T5/255 SKU: 16270900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-255mm-51-teeth-16-t5-255-sku-16270900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 250mm 50 teeth 16 T5/250 SKU: 16270800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-250mm-50-teeth-16-t5-250-sku-16270800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 245mm 49 teeth 16 T5/245 SKU: 16270700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-245mm-49-teeth-16-t5-245-sku-16270700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 225mm 45 teeth 16 T5/225 SKU: 16270600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-225mm-45-teeth-16-t5-225-sku-16270600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 220mm 44 teeth 16 T5/220 SKU: 16270500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-220mm-44-teeth-16-t5-220-sku-16270500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 215mm 43 teeth 16 T5/215 SKU: 16270400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-215mm-43-teeth-16-t5-215-sku-16270400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 200mm 40 teeth 16 T5/200 SKU: 16270300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-200mm-40-teeth-16-t5-200-sku-16270300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 185mm 37 teeth 16 T5/185 SKU: 16270200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-185mm-37-teeth-16-t5-185-sku-16270200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 165mm 33 teeth 16 T5/165 SKU: 16270100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-165mm-33-teeth-16-t5-165-sku-16270100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm 16T5 open length PAZ = Polyamide fabric on tooth side SKU: 16270001](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-16t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16270001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 16mm 16 T5 open length SKU: 16270000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-16-t5-open-length-sku-16270000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T5 belt width 10mm SKU: 16269900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-10mm-sku-16269900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T5 width 10mm Lw 1440mm 288 teeth 10 T5/1440 SKU: 16266400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1440mm-288-teeth-10-t5-1440-sku-16266400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1380mm 276 teeth 10 T5/1380 SKU: 16266300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1380mm-276-teeth-10-t5-1380-sku-16266300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1215mm 243 teeth 10 T5/1215 SKU: 16266200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1215mm-243-teeth-10-t5-1215-sku-16266200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1100mm 220 teeth 10 T5/1100 SKU: 16266100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1100mm-220-teeth-10-t5-1100-sku-16266100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1075mm 215 teeth 10 T5/1075 SKU: 16266000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1075mm-215-teeth-10-t5-1075-sku-16266000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1000mm 200 teeth 10 T5/1000 SKU: 16265900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1000mm-200-teeth-10-t5-1000-sku-16265900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 990mm 198 teeth 10 T5/990 SKU: 16265800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-990mm-198-teeth-10-t5-990-sku-16265800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 900mm 180 teeth 10 T5/900 SKU: 16265700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-900mm-180-teeth-10-t5-900-sku-16265700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 850mm 170 teeth 10 T5/850 SKU: 16265600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-850mm-170-teeth-10-t5-850-sku-16265600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 840mm 168 teeth 10 T5/840 SKU: 16265500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-840mm-168-teeth-10-t5-840-sku-16265500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 815mm 163 teeth 10 T5/815 SKU: 16265400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-815mm-163-teeth-10-t5-815-sku-16265400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 780mm 156 teeth 10 T5/780 SKU: 16265300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-780mm-156-teeth-10-t5-780-sku-16265300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 750mm 150 teeth 10 T5/750 SKU: 16265200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-750mm-150-teeth-10-t5-750-sku-16265200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 720mm 144 teeth 10 T5/720 SKU: 16265100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-720mm-144-teeth-10-t5-720-sku-16265100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 700mm 140 teeth 10 T5/700 SKU: 16265000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-700mm-140-teeth-10-t5-700-sku-16265000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 695mm 139 teeth 10 T5/695 SKU: 16264900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-695mm-139-teeth-10-t5-695-sku-16264900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 690mm 138 teeth 10 T5/690 SKU: 16264800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-690mm-138-teeth-10-t5-690-sku-16264800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 660mm 132 teeth 10 T5/660 SKU: 16264700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-660mm-132-teeth-10-t5-660-sku-16264700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 650mm 130 teeth 10 T5/650 SKU: 16264600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-650mm-130-teeth-10-t5-650-sku-16264600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 640mm 128 teeth 10 T5/640 SKU: 16264500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-640mm-128-teeth-10-t5-640-sku-16264500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 630mm 126 teeth 10 T5/630 SKU: 16264400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-630mm-126-teeth-10-t5-630-sku-16264400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 620mm 124 teeth 10 T5/620 SKU: 16264300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-620mm-124-teeth-10-t5-620-sku-16264300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 610mm 122 teeth 10 T5/610 SKU: 16264200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-610mm-122-teeth-10-t5-610-sku-16264200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 600mm 120 teeth 10 T5/600 SKU: 16264100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-600mm-120-teeth-10-t5-600-sku-16264100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 575mm 115 teeth 10 T5/575 SKU: 16264000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-575mm-115-teeth-10-t5-575-sku-16264000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 560mm 112 teeth 10 T5/560 SKU: 16263900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-560mm-112-teeth-10-t5-560-sku-16263900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 550mm 110 teeth 10 T5/550 SKU: 16263800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-550mm-110-teeth-10-t5-550-sku-16263800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 545mm 109 teeth 10 T5/545 SKU: 16263700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-545mm-109-teeth-10-t5-545-sku-16263700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 525mm 105 teeth 10 T5/525 SKU: 16263600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-525mm-105-teeth-10-t5-525-sku-16263600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 510mm 102 teeth 10 T5/510 SKU: 16263500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-510mm-102-teeth-10-t5-510-sku-16263500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 500mm 100 teeth 10 T5/500 SKU: 16263400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-500mm-100-teeth-10-t5-500-sku-16263400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 480mm 96 teeth 10 T5/480 SKU: 16263300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-480mm-96-teeth-10-t5-480-sku-16263300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 475mm 95 teeth 10 T5/475 SKU: 16263200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-475mm-95-teeth-10-t5-475-sku-16263200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 465mm 93 teeth 10 T5/465 SKU: 16263100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-465mm-93-teeth-10-t5-465-sku-16263100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 455mm 91 teeth 10 T5/455 SKU: 16263000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-455mm-91-teeth-10-t5-455-sku-16263000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 450mm 90 teeth 10 T5/450 SKU: 16262900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-450mm-90-teeth-10-t5-450-sku-16262900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 425mm 85 teeth 10 T5/425 SKU: 16262800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-425mm-85-teeth-10-t5-425-sku-16262800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 420mm 84 teeth 10 T5/420 SKU: 16262700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-420mm-84-teeth-10-t5-420-sku-16262700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 410mm 82 teeth 10 T5/410 SKU: 16262600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-410mm-82-teeth-10-t5-410-sku-16262600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 400mm 80 teeth 10 T5/400 SKU: 16262500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-400mm-80-teeth-10-t5-400-sku-16262500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 390mm 78 teeth 10 T5/390 SKU: 16262400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-390mm-78-teeth-10-t5-390-sku-16262400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 375mm 75 teeth 10 T5/375 SKU: 16262300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-375mm-75-teeth-10-t5-375-sku-16262300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 365mm 73 teeth 10 T5/365 SKU: 16262200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-365mm-73-teeth-10-t5-365-sku-16262200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 355mm 71 teeth 10 T5/355 SKU: 16262100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-355mm-71-teeth-10-t5-355-sku-16262100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 350mm 70 teeth 10 T5/350 SKU: 16262000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-350mm-70-teeth-10-t5-350-sku-16262000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 340mm 68 teeth 10 T5/340 SKU: 16261900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-340mm-68-teeth-10-t5-340-sku-16261900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 330mm 66 teeth 10 T5/330 SKU: 16261800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-330mm-66-teeth-10-t5-330-sku-16261800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 325mm 65 teeth 10 T5/325 SKU: 16261700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-325mm-65-teeth-10-t5-325-sku-16261700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 305mm 61 teeth 10 T5/305 SKU: 16261600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-305mm-61-teeth-10-t5-305-sku-16261600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 300mm 60 teeth 10 T5/300 SKU: 16261500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-300mm-60-teeth-10-t5-300-sku-16261500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 295mm 59 teeth 10 T5/295 SKU: 16261400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-295mm-59-teeth-10-t5-295-sku-16261400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 280mm 56 teeth 10 T5/280 SKU: 16261300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-280mm-56-teeth-10-t5-280-sku-16261300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 275mm 55 teeth 10 T5/275 SKU: 16261200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-275mm-55-teeth-10-t5-275-sku-16261200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 270mm 54 teeth 10 T5/270 SKU: 16261100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-270mm-54-teeth-10-t5-270-sku-16261100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 260mm 52 teeth 10 T5/260 SKU: 16261000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-260mm-52-teeth-10-t5-260-sku-16261000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 255mm 51 teeth 10 T5/255 SKU: 16260900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-255mm-51-teeth-10-t5-255-sku-16260900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 250mm 50 teeth 10 T5/250 SKU: 16260800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-250mm-50-teeth-10-t5-250-sku-16260800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 245mm 49 teeth 10 T5/245 SKU: 16260700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-245mm-49-teeth-10-t5-245-sku-16260700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 225mm 45 teeth 10 T5/225 SKU: 16260600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-225mm-45-teeth-10-t5-225-sku-16260600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 220mm 44 teeth 10 T5/220 SKU: 16260500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-220mm-44-teeth-10-t5-220-sku-16260500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 215mm 43 teeth 10 T5/215 SKU: 16260400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-215mm-43-teeth-10-t5-215-sku-16260400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 200mm 40 teeth 10 T5/200 SKU: 16260300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-200mm-40-teeth-10-t5-200-sku-16260300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 550mm 110 teeth 25 T5/550 SKU: 16283800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-550mm-110-teeth-25-t5-550-sku-16283800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 545mm 109 teeth 25 T5/545 SKU: 16283700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-545mm-109-teeth-25-t5-545-sku-16283700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 525mm 105 teeth 25 T5/525 SKU: 16283600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-525mm-105-teeth-25-t5-525-sku-16283600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 510mm 102 teeth 25 T5/510 SKU: 16283500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-510mm-102-teeth-25-t5-510-sku-16283500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 500mm 100 teeth 25 T5/500 SKU: 16283400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-500mm-100-teeth-25-t5-500-sku-16283400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 480mm 96 teeth 25 T5/480 SKU: 16283300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-480mm-96-teeth-25-t5-480-sku-16283300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 475mm 95 teeth 25 T5/475 SKU: 16283200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-475mm-95-teeth-25-t5-475-sku-16283200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 465mm 93 teeth 25 T5/465 SKU: 16283100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-465mm-93-teeth-25-t5-465-sku-16283100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 455mm 91 teeth 25 T5/455 SKU: 16283000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-455mm-91-teeth-25-t5-455-sku-16283000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 450mm 90 teeth 25 T5/450 SKU: 16282900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-450mm-90-teeth-25-t5-450-sku-16282900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 425mm 85 teeth 25 T5/425 SKU: 16282800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-425mm-85-teeth-25-t5-425-sku-16282800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 420mm 84 teeth 25 T5/420 SKU: 16282700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-420mm-84-teeth-25-t5-420-sku-16282700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 410mm 82 teeth 25 T5/410 SKU: 16282600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-410mm-82-teeth-25-t5-410-sku-16282600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 400mm 80 teeth 25 T5/400 SKU: 16282500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-400mm-80-teeth-25-t5-400-sku-16282500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 390mm 78 teeth 25 T5/390 SKU: 16282400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-390mm-78-teeth-25-t5-390-sku-16282400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 375mm 75 teeth 25 T5/375 SKU: 16282300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-375mm-75-teeth-25-t5-375-sku-16282300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 365mm 73 teeth 25 T5/365 SKU: 16282200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-365mm-73-teeth-25-t5-365-sku-16282200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 355mm 71 teeth 25 T5/355 SKU: 16282100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-355mm-71-teeth-25-t5-355-sku-16282100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 350mm 70 teeth 25 T5/350 SKU: 16282000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-350mm-70-teeth-25-t5-350-sku-16282000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 340mm 68 teeth 25 T5/340 SKU: 16281900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-340mm-68-teeth-25-t5-340-sku-16281900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 330mm 66 teeth 25 T5/330 SKU: 16281800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-330mm-66-teeth-25-t5-330-sku-16281800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 325mm 65 teeth 25 T5/325 SKU: 16281700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-325mm-65-teeth-25-t5-325-sku-16281700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 305mm 61 teeth 25 T5/305 SKU: 16281600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-305mm-61-teeth-25-t5-305-sku-16281600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 300mm 60 teeth 25 T5/300 SKU: 16281500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-300mm-60-teeth-25-t5-300-sku-16281500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 295mm 59 teeth 25 T5/295 SKU: 16281400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-295mm-59-teeth-25-t5-295-sku-16281400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 280mm 56 teeth 25 T5/280 SKU: 16281300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-280mm-56-teeth-25-t5-280-sku-16281300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 275mm 55 teeth 25 T5/275 SKU: 16281200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-275mm-55-teeth-25-t5-275-sku-16281200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 270mm 54 teeth 25 T5/270 SKU: 16281100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-270mm-54-teeth-25-t5-270-sku-16281100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 260mm 52 teeth 25 T5/260 SKU: 16281000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-260mm-52-teeth-25-t5-260-sku-16281000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 255mm 51 teeth 25 T5/255 SKU: 16280900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-255mm-51-teeth-25-t5-255-sku-16280900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 250mm 50 teeth 25 T5/250 SKU: 16280800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-250mm-50-teeth-25-t5-250-sku-16280800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 245mm 49 teeth 25 T5/245 SKU: 16280700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-245mm-49-teeth-25-t5-245-sku-16280700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 225mm 45 teeth 25 T5/225 SKU: 16280600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-225mm-45-teeth-25-t5-225-sku-16280600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 220mm 44 teeth 25 T5/220 SKU: 16280500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-220mm-44-teeth-25-t5-220-sku-16280500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 215mm 43 teeth 25 T5/215 SKU: 16280400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-215mm-43-teeth-25-t5-215-sku-16280400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 200mm 40 teeth 25 T5/200 SKU: 16280300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-200mm-40-teeth-25-t5-200-sku-16280300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 185mm 37 teeth 25 T5/185 SKU: 16280200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-185mm-37-teeth-25-t5-185-sku-16280200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 165mm 33 teeth 25 T5/165 SKU: 16280100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-165mm-33-teeth-25-t5-165-sku-16280100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm 25T5 open length PAZ = Polyamide fabric on tooth side SKU: 16280001](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-25t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16280001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 25mm 25 T5 open length SKU: 16280000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-25-t5-open-length-sku-16280000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T5 belt width 16mm SKU: 16279900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-16mm-sku-16279900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Timing belt pulley steel T5 112 teeth belt width 25mm for taper bush 2012 SKU: 16277494](https://maedler.in/product/timing-belt-pulley-steel-t5-112-teeth-belt-width-25mm-for-taper-bush-2012-sku-16277494/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 96 teeth belt width 25mm for taper bush 2012 SKU: 16277492](https://maedler.in/product/timing-belt-pulley-steel-t5-96-teeth-belt-width-25mm-for-taper-bush-2012-sku-16277492/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 90 teeth belt width 25mm for taper bush 1610 SKU: 16277490](https://maedler.in/product/timing-belt-pulley-steel-t5-90-teeth-belt-width-25mm-for-taper-bush-1610-sku-16277490/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 84 teeth belt width 25mm for taper bush 1610 SKU: 16277484](https://maedler.in/product/timing-belt-pulley-steel-t5-84-teeth-belt-width-25mm-for-taper-bush-1610-sku-16277484/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 80 teeth belt width 25mm for taper bush 1610 SKU: 16277480](https://maedler.in/product/timing-belt-pulley-steel-t5-80-teeth-belt-width-25mm-for-taper-bush-1610-sku-16277480/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 72 teeth belt width 25mm for taper bush 1610 SKU: 16277472](https://maedler.in/product/timing-belt-pulley-steel-t5-72-teeth-belt-width-25mm-for-taper-bush-1610-sku-16277472/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 64 teeth belt width 25mm for taper bush 1210 SKU: 16277464](https://maedler.in/product/timing-belt-pulley-steel-t5-64-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277464/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 60 teeth belt width 25mm for taper bush 1210 SKU: 16277460](https://maedler.in/product/timing-belt-pulley-steel-t5-60-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277460/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 56 teeth belt width 25mm for taper bush 1210 SKU: 16277456](https://maedler.in/product/timing-belt-pulley-steel-t5-56-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277456/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 48 teeth belt width 25mm for taper bush 1210 SKU: 16277448](https://maedler.in/product/timing-belt-pulley-steel-t5-48-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277448/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 44 teeth belt width 25mm for taper bush 1210 SKU: 16277444](https://maedler.in/product/timing-belt-pulley-steel-t5-44-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277444/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 40 teeth belt width 25mm for taper bush 1108 SKU: 16277440](https://maedler.in/product/timing-belt-pulley-steel-t5-40-teeth-belt-width-25mm-for-taper-bush-1108-sku-16277440/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 38 teeth belt width 25mm for taper bush 1108 SKU: 16277438](https://maedler.in/product/timing-belt-pulley-steel-t5-38-teeth-belt-width-25mm-for-taper-bush-1108-sku-16277438/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 36 teeth belt width 25mm for taper bush 1108 SKU: 16277436](https://maedler.in/product/timing-belt-pulley-steel-t5-36-teeth-belt-width-25mm-for-taper-bush-1108-sku-16277436/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 34 teeth belt width 25mm for taper bush 1008 SKU: 16277434](https://maedler.in/product/timing-belt-pulley-steel-t5-34-teeth-belt-width-25mm-for-taper-bush-1008-sku-16277434/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 112 teeth belt width 16mm for taper bush 2012 SKU: 16277394](https://maedler.in/product/timing-belt-pulley-steel-t5-112-teeth-belt-width-16mm-for-taper-bush-2012-sku-16277394/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 96 teeth belt width 16mm for taper bush 2012 SKU: 16277392](https://maedler.in/product/timing-belt-pulley-steel-t5-96-teeth-belt-width-16mm-for-taper-bush-2012-sku-16277392/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 90 teeth belt width 16mm for taper bush 1610 SKU: 16277390](https://maedler.in/product/timing-belt-pulley-steel-t5-90-teeth-belt-width-16mm-for-taper-bush-1610-sku-16277390/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 84 teeth belt width 16mm for taper bush 1610 SKU: 16277384](https://maedler.in/product/timing-belt-pulley-steel-t5-84-teeth-belt-width-16mm-for-taper-bush-1610-sku-16277384/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 80 teeth belt width 16mm for taper bush 1610 SKU: 16277380](https://maedler.in/product/timing-belt-pulley-steel-t5-80-teeth-belt-width-16mm-for-taper-bush-1610-sku-16277380/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 72 teeth belt width 16mm for taper bush 1610 SKU: 16277372](https://maedler.in/product/timing-belt-pulley-steel-t5-72-teeth-belt-width-16mm-for-taper-bush-1610-sku-16277372/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 64 teeth belt width 16mm for taper bush 1210 SKU: 16277364](https://maedler.in/product/timing-belt-pulley-steel-t5-64-teeth-belt-width-16mm-for-taper-bush-1210-sku-16277364/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 60 teeth belt width 16mm for taper bush 1210 SKU: 16277360](https://maedler.in/product/timing-belt-pulley-steel-t5-60-teeth-belt-width-16mm-for-taper-bush-1210-sku-16277360/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 56 teeth belt width 16mm for taper bush 1210 SKU: 16277356](https://maedler.in/product/timing-belt-pulley-steel-t5-56-teeth-belt-width-16mm-for-taper-bush-1210-sku-16277356/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 48 teeth belt width 16mm for taper bush 1210 SKU: 16277348](https://maedler.in/product/timing-belt-pulley-steel-t5-48-teeth-belt-width-16mm-for-taper-bush-1210-sku-16277348/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 44 teeth belt width 16mm for taper bush 1108 SKU: 16277344](https://maedler.in/product/timing-belt-pulley-steel-t5-44-teeth-belt-width-16mm-for-taper-bush-1108-sku-16277344/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 40 teeth belt width 16mm for taper bush 1108 SKU: 16277340](https://maedler.in/product/timing-belt-pulley-steel-t5-40-teeth-belt-width-16mm-for-taper-bush-1108-sku-16277340/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 38 teeth belt width 16mm for taper bush 1108 SKU: 16277338](https://maedler.in/product/timing-belt-pulley-steel-t5-38-teeth-belt-width-16mm-for-taper-bush-1108-sku-16277338/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 36 teeth belt width 16mm for taper bush 1108 SKU: 16277336](https://maedler.in/product/timing-belt-pulley-steel-t5-36-teeth-belt-width-16mm-for-taper-bush-1108-sku-16277336/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 34 teeth belt width 16mm for taper bush 1008 SKU: 16277334](https://maedler.in/product/timing-belt-pulley-steel-t5-34-teeth-belt-width-16mm-for-taper-bush-1008-sku-16277334/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt T5 width 16mm Lw 1440mm 288 teeth 16 T5/1440 SKU: 16276400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1440mm-288-teeth-16-t5-1440-sku-16276400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1380mm 276 teeth 16 T5/1380 SKU: 16276300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1380mm-276-teeth-16-t5-1380-sku-16276300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1215mm 243 teeth 16 T5/1215 SKU: 16276200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1215mm-243-teeth-16-t5-1215-sku-16276200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1100mm 220 teeth 16 T5/1100 SKU: 16276100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1100mm-220-teeth-16-t5-1100-sku-16276100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1075mm 215 teeth 16 T5/1075 SKU: 16276000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1075mm-215-teeth-16-t5-1075-sku-16276000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1000mm 200 teeth 16 T5/1000 SKU: 16275900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1000mm-200-teeth-16-t5-1000-sku-16275900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 990mm 198 teeth 16 T5/990 SKU: 16275800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-990mm-198-teeth-16-t5-990-sku-16275800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 900mm 180 teeth 16 T5/900 SKU: 16275700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-900mm-180-teeth-16-t5-900-sku-16275700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 850mm 170 teeth 16 T5/850 SKU: 16275600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-850mm-170-teeth-16-t5-850-sku-16275600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 840mm 168 teeth 16 T5/840 SKU: 16275500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-840mm-168-teeth-16-t5-840-sku-16275500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 815mm 163 teeth 16 T5/815 SKU: 16275400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-815mm-163-teeth-16-t5-815-sku-16275400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 780mm 156 teeth 16 T5/780 SKU: 16275300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-780mm-156-teeth-16-t5-780-sku-16275300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 750mm 150 teeth 16 T5/750 SKU: 16275200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-750mm-150-teeth-16-t5-750-sku-16275200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 720mm 144 teeth 16 T5/720 SKU: 16275100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-720mm-144-teeth-16-t5-720-sku-16275100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 700mm 140 teeth 16 T5/700 SKU: 16275000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-700mm-140-teeth-16-t5-700-sku-16275000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 695mm 139 teeth 16 T5/695 SKU: 16274900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-695mm-139-teeth-16-t5-695-sku-16274900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 690mm 138 teeth 16 T5/690 SKU: 16274800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-690mm-138-teeth-16-t5-690-sku-16274800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 660mm 132 teeth 16 T5/660 SKU: 16274700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-660mm-132-teeth-16-t5-660-sku-16274700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 650mm 130 teeth 16 T5/650 SKU: 16274600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-650mm-130-teeth-16-t5-650-sku-16274600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 640mm 128 teeth 16 T5/640 SKU: 16274500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-640mm-128-teeth-16-t5-640-sku-16274500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 630mm 126 teeth 16 T5/630 SKU: 16274400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-630mm-126-teeth-16-t5-630-sku-16274400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 620mm 124 teeth 16 T5/620 SKU: 16274300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-620mm-124-teeth-16-t5-620-sku-16274300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 610mm 122 teeth 16 T5/610 SKU: 16274200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-610mm-122-teeth-16-t5-610-sku-16274200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 600mm 120 teeth 16 T5/600 SKU: 16274100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-600mm-120-teeth-16-t5-600-sku-16274100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 575mm 115 teeth 16 T5/575 SKU: 16274000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-575mm-115-teeth-16-t5-575-sku-16274000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 560mm 112 teeth 16 T5/560 SKU: 16273900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-560mm-112-teeth-16-t5-560-sku-16273900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 550mm 110 teeth 16 T5/550 SKU: 16273800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-550mm-110-teeth-16-t5-550-sku-16273800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 545mm 109 teeth 16 T5/545 SKU: 16273700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-545mm-109-teeth-16-t5-545-sku-16273700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 525mm 105 teeth 16 T5/525 SKU: 16273600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-525mm-105-teeth-16-t5-525-sku-16273600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [timing bar T5 15 teeth length 140mm material aluminium SKU: 16291500](https://maedler.in/product/timing-bar-t5-15-teeth-length-140mm-material-aluminium-sku-16291500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 14 teeth length 140mm material aluminium SKU: 16291400](https://maedler.in/product/timing-bar-t5-14-teeth-length-140mm-material-aluminium-sku-16291400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 13 teeth length 140mm material aluminium SKU: 16291300](https://maedler.in/product/timing-bar-t5-13-teeth-length-140mm-material-aluminium-sku-16291300/): Material: Aluminium similar EN AW2017A. - [timing bar T5 12 teeth length 140mm material aluminium SKU: 16291200](https://maedler.in/product/timing-bar-t5-12-teeth-length-140mm-material-aluminium-sku-16291200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 11 teeth length 140mm material aluminium SKU: 16291100](https://maedler.in/product/timing-bar-t5-11-teeth-length-140mm-material-aluminium-sku-16291100/): Material: Aluminium similar EN AW2017A. - [timing bar T5 10 teeth length 140mm material aluminium SKU: 16291000](https://maedler.in/product/timing-bar-t5-10-teeth-length-140mm-material-aluminium-sku-16291000/): Material: Aluminium similar EN AW2017A. - [Fixing plate for timing belts material aluminium T5 belt width 50mm SKU: 16289901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-50mm-sku-16289901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium T5 belt width 25mm SKU: 16289900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-25mm-sku-16289900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium T5 belt width 32mm SKU: 16289800](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-32mm-sku-16289800/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T5 width 50mm 50T5 open length PAZ = Polyamide fabric on tooth side SKU: 16288001](https://maedler.in/product/polyurethane-timing-belt-t5-width-50mm-50t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16288001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 50mm 50 T5 open length with tensile members from steel packed 2 x 25mm SKU: 16288000](https://maedler.in/product/polyurethane-timing-belt-t5-width-50mm-50-t5-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16288000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T5 width 32mm Lw 1440mm 288teeth 32 T5/1440 SKU: 16287064](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1440mm-288teeth-32-t5-1440-sku-16287064/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1380mm 276teeth 32 T5/1380 SKU: 16287063](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1380mm-276teeth-32-t5-1380-sku-16287063/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1215mm 243teeth 32 T5/1215 SKU: 16287062](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1215mm-243teeth-32-t5-1215-sku-16287062/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1100mm 220teeth 32 T5/1100 SKU: 16287061](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1100mm-220teeth-32-t5-1100-sku-16287061/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1075mm 215teeth 32 T5/1075 SKU: 16287060](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1075mm-215teeth-32-t5-1075-sku-16287060/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1000mm 200teeth 32 T5/1000 SKU: 16287059](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1000mm-200teeth-32-t5-1000-sku-16287059/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 990mm 198teeth 32 T5/990 SKU: 16287058](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-990mm-198teeth-32-t5-990-sku-16287058/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 900mm 180teeth 32 T5/900 SKU: 16287057](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-900mm-180teeth-32-t5-900-sku-16287057/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 850mm 170teeth 32 T5/850 SKU: 16287056](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-850mm-170teeth-32-t5-850-sku-16287056/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 840mm 168teeth 32 T5/840 SKU: 16287055](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-840mm-168teeth-32-t5-840-sku-16287055/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 815mm 163teeth 32 T5/815 SKU: 16287054](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-815mm-163teeth-32-t5-815-sku-16287054/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 780mm 156teeth 32 T5/780 SKU: 16287053](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-780mm-156teeth-32-t5-780-sku-16287053/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 750mm 150teeth 32 T5/750 SKU: 16287052](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-750mm-150teeth-32-t5-750-sku-16287052/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 720mm 144teeth 32 T5/720 SKU: 16287051](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-720mm-144teeth-32-t5-720-sku-16287051/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 700mm 140teeth 32 T5/700 SKU: 16287050](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-700mm-140teeth-32-t5-700-sku-16287050/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 695mm 139teeth 32 T5/695 SKU: 16287049](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-695mm-139teeth-32-t5-695-sku-16287049/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 690mm 138teeth 32 T5/690 SKU: 16287048](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-690mm-138teeth-32-t5-690-sku-16287048/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 660mm 132teeth 32 T5/660 SKU: 16287047](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-660mm-132teeth-32-t5-660-sku-16287047/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 650mm 130teeth 32 T5/650 SKU: 16287046](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-650mm-130teeth-32-t5-650-sku-16287046/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 640mm 128teeth 32 T5/640 SKU: 16287045](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-640mm-128teeth-32-t5-640-sku-16287045/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 630mm 126teeth 32 T5/630 SKU: 16287044](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-630mm-126teeth-32-t5-630-sku-16287044/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 620mm 124teeth 32 T5/620 SKU: 16287043](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-620mm-124teeth-32-t5-620-sku-16287043/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 610mm 122teeth 32 T5/610 SKU: 16287042](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-610mm-122teeth-32-t5-610-sku-16287042/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 600mm 120teeth 32 T5/600 SKU: 16287041](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-600mm-120teeth-32-t5-600-sku-16287041/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 575mm 115teeth 32 T5/575 SKU: 16287040](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-575mm-115teeth-32-t5-575-sku-16287040/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 560mm 112teeth 32 T5/560 SKU: 16287039](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-560mm-112teeth-32-t5-560-sku-16287039/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 550mm 110teeth 32 T5/550 SKU: 16287038](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-550mm-110teeth-32-t5-550-sku-16287038/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 545mm 109teeth 32 T5/545 SKU: 16287037](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-545mm-109teeth-32-t5-545-sku-16287037/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 525mm 105teeth 32 T5/525 SKU: 16287036](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-525mm-105teeth-32-t5-525-sku-16287036/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 510mm 102teeth 32 T5/510 SKU: 16287035](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-510mm-102teeth-32-t5-510-sku-16287035/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 500mm 100teeth 32 T5/500 SKU: 16287034](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-500mm-100teeth-32-t5-500-sku-16287034/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 480mm 96teeth 32 T5/480 SKU: 16287033](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-480mm-96teeth-32-t5-480-sku-16287033/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 475mm 95teeth 32 T5/475 SKU: 16287032](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-475mm-95teeth-32-t5-475-sku-16287032/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 465mm 93teeth 32 T5/465 SKU: 16287031](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-465mm-93teeth-32-t5-465-sku-16287031/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 455mm 91teeth 32 T5/455 SKU: 16287030](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-455mm-91teeth-32-t5-455-sku-16287030/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 450mm 90teeth 32 T5/450 SKU: 16287029](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-450mm-90teeth-32-t5-450-sku-16287029/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 425mm 85teeth 32 T5/425 SKU: 16287028](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-425mm-85teeth-32-t5-425-sku-16287028/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 420mm 84teeth 32 T5/420 SKU: 16287027](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-420mm-84teeth-32-t5-420-sku-16287027/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 410mm 82teeth 32 T5/410 SKU: 16287026](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-410mm-82teeth-32-t5-410-sku-16287026/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 400mm 80teeth 32 T5/400 SKU: 16287025](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-400mm-80teeth-32-t5-400-sku-16287025/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 390mm 78teeth 32 T5/390 SKU: 16287024](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-390mm-78teeth-32-t5-390-sku-16287024/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 375mm 75teeth 32 T5/375 SKU: 16287023](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-375mm-75teeth-32-t5-375-sku-16287023/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 365mm 73teeth 32 T5/365 SKU: 16287022](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-365mm-73teeth-32-t5-365-sku-16287022/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 355mm 71teeth 32 T5/355 SKU: 16287021](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-355mm-71teeth-32-t5-355-sku-16287021/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 350mm 70teeth 32 T5/350 SKU: 16287020](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-350mm-70teeth-32-t5-350-sku-16287020/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 340mm 68teeth 32 T5/340 SKU: 16287019](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-340mm-68teeth-32-t5-340-sku-16287019/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 330mm 66teeth 32 T5/330 SKU: 16287018](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-330mm-66teeth-32-t5-330-sku-16287018/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 325mm 65teeth 32 T5/325 SKU: 16287017](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-325mm-65teeth-32-t5-325-sku-16287017/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 305mm 61teeth 32 T5/305 SKU: 16287016](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-305mm-61teeth-32-t5-305-sku-16287016/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 300mm 60teeth 32 T5/300 SKU: 16287015](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-300mm-60teeth-32-t5-300-sku-16287015/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 295mm 59teeth 32 T5/295 SKU: 16287014](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-295mm-59teeth-32-t5-295-sku-16287014/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 280mm 56teeth 32 T5/280 SKU: 16287013](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-280mm-56teeth-32-t5-280-sku-16287013/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 275mm 55teeth 32 T5/275 SKU: 16287012](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-275mm-55teeth-32-t5-275-sku-16287012/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 270mm 54teeth 32 T5/270 SKU: 16287011](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-270mm-54teeth-32-t5-270-sku-16287011/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 260mm 52teeth 32 T5/260 SKU: 16287010](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-260mm-52teeth-32-t5-260-sku-16287010/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 255mm 51teeth 32 T5/255 SKU: 16287009](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-255mm-51teeth-32-t5-255-sku-16287009/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 250mm 50teeth 32 T5/250 SKU: 16287008](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-250mm-50teeth-32-t5-250-sku-16287008/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 245mm 49teeth 32 T5/245 SKU: 16287007](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-245mm-49teeth-32-t5-245-sku-16287007/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 225mm 45teeth 32 T5/225 SKU: 16287006](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-225mm-45teeth-32-t5-225-sku-16287006/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 220mm 44 teeth 32 T5/220 SKU: 16287005](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-220mm-44-teeth-32-t5-220-sku-16287005/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 215mm 43 teeth 32 T5/215 SKU: 16287004](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-215mm-43-teeth-32-t5-215-sku-16287004/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm 32T5 open length PAZ = Polyamide fabric on tooth side SKU: 16287001](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-32t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16287001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 32mm 32 T5 open length with tensile members from steel packed 2 x 16mm SKU: 16287000](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-32-t5-open-length-with-tensile-members-from-steel-packed-2-x-16mm-sku-16287000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T5 width 25mm Lw 1440mmt 288 teeth 25 T5/1440 SKU: 16286400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1440mmt-288-teeth-25-t5-1440-sku-16286400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1380mm 276 teeth 25 T5/1380 SKU: 16286300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1380mm-276-teeth-25-t5-1380-sku-16286300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1215mm 243 teeth 25 T5/1215 SKU: 16286200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1215mm-243-teeth-25-t5-1215-sku-16286200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1100mm 220 teeth 25 T5/1100 SKU: 16286100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1100mm-220-teeth-25-t5-1100-sku-16286100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1075mm 215 teeth 25 T5/1075 SKU: 16286000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1075mm-215-teeth-25-t5-1075-sku-16286000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1000mm 200 teeth 25 T5/1000 SKU: 16285900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1000mm-200-teeth-25-t5-1000-sku-16285900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 990mm 198 teeth 25 T5/990 SKU: 16285800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-990mm-198-teeth-25-t5-990-sku-16285800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 900mm 180 teeth 25 T5/900 SKU: 16285700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-900mm-180-teeth-25-t5-900-sku-16285700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 850mm 170 teeth 25 T5/850 SKU: 16285600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-850mm-170-teeth-25-t5-850-sku-16285600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 840mm 168 teeth 25 T5/840 SKU: 16285500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-840mm-168-teeth-25-t5-840-sku-16285500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 815mm 163 teeth 25 T5/815 SKU: 16285400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-815mm-163-teeth-25-t5-815-sku-16285400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 780mm 156 teeth 25 T5/780 SKU: 16285300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-780mm-156-teeth-25-t5-780-sku-16285300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 750mm 150 teeth 25 T5/750 SKU: 16285200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-750mm-150-teeth-25-t5-750-sku-16285200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 720mm 144 teeth 25 T5/720 SKU: 16285100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-720mm-144-teeth-25-t5-720-sku-16285100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 700mm 140 teeth 25 T5/700 SKU: 16285000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-700mm-140-teeth-25-t5-700-sku-16285000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 695mm 139 teeth 25 T5/695 SKU: 16284900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-695mm-139-teeth-25-t5-695-sku-16284900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 690mm 138 teeth 25 T5/690 SKU: 16284800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-690mm-138-teeth-25-t5-690-sku-16284800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 660mm 132 teeth 25 T5/660 SKU: 16284700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-660mm-132-teeth-25-t5-660-sku-16284700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 650mm 130 teeth 25 T5/650 SKU: 16284600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-650mm-130-teeth-25-t5-650-sku-16284600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 640mm 128 teeth 25 T5/640 SKU: 16284500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-640mm-128-teeth-25-t5-640-sku-16284500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 630mm 126 teeth 25 T5/630 SKU: 16284400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-630mm-126-teeth-25-t5-630-sku-16284400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 620mm 124 teeth 25 T5/620 SKU: 16284300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-620mm-124-teeth-25-t5-620-sku-16284300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 610mm 122 teeth 25 T5/610 SKU: 16284200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-610mm-122-teeth-25-t5-610-sku-16284200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 600mm 120 teeth 25 T5/600 SKU: 16284100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-600mm-120-teeth-25-t5-600-sku-16284100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 575mm 115 teeth 25 T5/575 SKU: 16284000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-575mm-115-teeth-25-t5-575-sku-16284000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 560mm 112 teeth 25 T5/560 SKU: 16283900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-560mm-112-teeth-25-t5-560-sku-16283900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT3 width 6mm Lw 201mm 67 teeth 6 AT3/201 SKU: 16360200](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-201mm-67-teeth-6-at3-201-sku-16360200/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 150mm 50 teeth 6 AT3/150 SKU: 16360100](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-150mm-50-teeth-6-at3-150-sku-16360100/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Timing belt pulley AT3 material aluminium 96 teeth for belt width 10 mm 21 AT3/96-0 SKU: 16339600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-96-teeth-for-belt-width-10-mm-21-at3-96-0-sku-16339600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 84 teeth for belt width 10 mm 21 AT3/84-0 SKU: 16338400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-84-teeth-for-belt-width-10-mm-21-at3-84-0-sku-16338400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 72 teeth for belt width 10mm 21 AT3/72-0 SKU: 16337200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-72-teeth-for-belt-width-10mm-21-at3-72-0-sku-16337200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 60 teeth for belt width 10mm 21 AT3/60-0 SKU: 16336000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-60-teeth-for-belt-width-10mm-21-at3-60-0-sku-16336000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 48 teeth for belt width 10mm 21 AT3/48-0 SKU: 16334800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-48-teeth-for-belt-width-10mm-21-at3-48-0-sku-16334800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 45 teeth for belt width 10mm 21 AT3/45-0 SKU: 16334500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-45-teeth-for-belt-width-10mm-21-at3-45-0-sku-16334500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 44 teeth for belt width 10mm 21 AT3/44-0 SKU: 16334400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-44-teeth-for-belt-width-10mm-21-at3-44-0-sku-16334400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 42 teeth for belt width 10mm 21 AT3/42-2 SKU: 16334200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-42-teeth-for-belt-width-10mm-21-at3-42-2-sku-16334200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 40 teeth for belt width 10mm 21 AT3/40-2 SKU: 16334000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-40-teeth-for-belt-width-10mm-21-at3-40-2-sku-16334000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 36 teeth for belt width 10mm 21 AT3/36-2 SKU: 16333600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-36-teeth-for-belt-width-10mm-21-at3-36-2-sku-16333600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 32 teeth for belt width 10mm 21 AT3/32-2 SKU: 16333200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-32-teeth-for-belt-width-10mm-21-at3-32-2-sku-16333200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 30 teeth for belt width 10mm 21 AT3/30-2 SKU: 16333000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-30-teeth-for-belt-width-10mm-21-at3-30-2-sku-16333000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 28 teeth for belt width 10mm 21 AT3/28-2 SKU: 16332800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-28-teeth-for-belt-width-10mm-21-at3-28-2-sku-16332800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 27 teeth for belt width 10mm 21 AT3/27-2 SKU: 16332700](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-27-teeth-for-belt-width-10mm-21-at3-27-2-sku-16332700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 26 teeth for belt width 10mm 21 AT3/26-2 SKU: 16332600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-26-teeth-for-belt-width-10mm-21-at3-26-2-sku-16332600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 25 teeth for belt width 10mm 21 AT3/25-2 SKU: 16332500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-25-teeth-for-belt-width-10mm-21-at3-25-2-sku-16332500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 24 teeth for belt width 10mm 21 AT3/24-2 SKU: 16332400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-24-teeth-for-belt-width-10mm-21-at3-24-2-sku-16332400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 22 teeth for belt width 10mm 21 AT3/22-2 SKU: 16332200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-22-teeth-for-belt-width-10mm-21-at3-22-2-sku-16332200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 20 teeth for belt width 10mm 21 AT3/20-2 SKU: 16332000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-20-teeth-for-belt-width-10mm-21-at3-20-2-sku-16332000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 19 teeth for belt width 10mm 21 AT3/19-2 SKU: 16331900](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-19-teeth-for-belt-width-10mm-21-at3-19-2-sku-16331900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 18 teeth for belt width 10mm 21 AT3/18-2 SKU: 16331800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-18-teeth-for-belt-width-10mm-21-at3-18-2-sku-16331800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 17 teeth for belt width 10 mm 21 AT3/17-2 SKU: 16331700](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-17-teeth-for-belt-width-10-mm-21-at3-17-2-sku-16331700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 16 teeth for belt width 10mm 21 AT3/16-2 SKU: 16331600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-16-teeth-for-belt-width-10mm-21-at3-16-2-sku-16331600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 15 teeth for belt width 10mm 21 AT3/15-2 SKU: 16331500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-15-teeth-for-belt-width-10mm-21-at3-15-2-sku-16331500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 96 teeth for belt width 6 mm 16 AT3/96-0 SKU: 16329600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-96-teeth-for-belt-width-6-mm-16-at3-96-0-sku-16329600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 84 teeth for belt width 6 mm 16 AT3/84-0 SKU: 16328400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-84-teeth-for-belt-width-6-mm-16-at3-84-0-sku-16328400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 72 teeth for belt width 6mm 16 AT3/72-0 SKU: 16327200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-72-teeth-for-belt-width-6mm-16-at3-72-0-sku-16327200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 60 teeth for belt width 6mm 16 AT3/60-0 SKU: 16326000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-60-teeth-for-belt-width-6mm-16-at3-60-0-sku-16326000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 48 teeth for belt width 6mm 16 AT3/48-0 SKU: 16324800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-48-teeth-for-belt-width-6mm-16-at3-48-0-sku-16324800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 45 teeth for belt width 6mm 16 AT3/45-0 SKU: 16324500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-45-teeth-for-belt-width-6mm-16-at3-45-0-sku-16324500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 44 teeth for belt width 6mm 16 AT3/44-0 SKU: 16324400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-44-teeth-for-belt-width-6mm-16-at3-44-0-sku-16324400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 42 teeth for belt width 6mm 16 AT3/42-2 SKU: 16324200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-42-teeth-for-belt-width-6mm-16-at3-42-2-sku-16324200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 40 teeth for belt width 6mm 16 AT3/40-2 SKU: 16324000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-40-teeth-for-belt-width-6mm-16-at3-40-2-sku-16324000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 36 teeth for belt width 6mm 16 AT3/36-2 SKU: 16323600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-36-teeth-for-belt-width-6mm-16-at3-36-2-sku-16323600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 32 teeth for belt width 6mm 16 AT3/32-2 SKU: 16323200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-32-teeth-for-belt-width-6mm-16-at3-32-2-sku-16323200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 30 teeth for belt width 6mm 16 AT3/30-2 SKU: 16323000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-30-teeth-for-belt-width-6mm-16-at3-30-2-sku-16323000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 28 teeth for belt width 6mm 16 AT3/28-2 SKU: 16322800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-28-teeth-for-belt-width-6mm-16-at3-28-2-sku-16322800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 27 teeth for belt width 6mm 16 AT3/27-2 SKU: 16322700](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-27-teeth-for-belt-width-6mm-16-at3-27-2-sku-16322700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 26 teeth for belt width 6mm 16 AT3/26-2 SKU: 16322600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-26-teeth-for-belt-width-6mm-16-at3-26-2-sku-16322600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 25 teeth for belt width 6mm 16 AT3/25-2 SKU: 16322500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-25-teeth-for-belt-width-6mm-16-at3-25-2-sku-16322500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 24 teeth for belt width 6mm 16 AT3/24-2 SKU: 16322400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-24-teeth-for-belt-width-6mm-16-at3-24-2-sku-16322400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 22 teeth for belt width 6mm 16 AT3/22-2 SKU: 16322200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-22-teeth-for-belt-width-6mm-16-at3-22-2-sku-16322200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 20 teeth for belt width 6mm 16 AT3/20-2 SKU: 16322000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-20-teeth-for-belt-width-6mm-16-at3-20-2-sku-16322000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 19 teeth for belt width 6mm 16 AT3/19-2 SKU: 16321900](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-19-teeth-for-belt-width-6mm-16-at3-19-2-sku-16321900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 18 teeth for belt width 6mm 16 AT3/18-2 SKU: 16321800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-18-teeth-for-belt-width-6mm-16-at3-18-2-sku-16321800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 17 teeth for belt width 6 mm 16 AT3/17-2 SKU: 16321700](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-17-teeth-for-belt-width-6-mm-16-at3-17-2-sku-16321700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 16 teeth for belt width 6mm 16 AT3/16-2 SKU: 16321600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-16-teeth-for-belt-width-6mm-16-at3-16-2-sku-16321600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 15 teeth for belt width 6mm 16 AT3/15-2 SKU: 16321500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-15-teeth-for-belt-width-6mm-16-at3-15-2-sku-16321500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [timing bar T5 60 teeth length 160mm material 1.4305 SKU: 16299960](https://maedler.in/product/timing-bar-t5-60-teeth-length-160mm-material-1-4305-sku-16299960/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 50 teeth length 160mm material 1.4305 SKU: 16299950](https://maedler.in/product/timing-bar-t5-50-teeth-length-160mm-material-1-4305-sku-16299950/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 48 teeth length 160mm material 1.4305 SKU: 16299948](https://maedler.in/product/timing-bar-t5-48-teeth-length-160mm-material-1-4305-sku-16299948/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 40 teeth length 160mm material 1.4305 SKU: 16299940](https://maedler.in/product/timing-bar-t5-40-teeth-length-160mm-material-1-4305-sku-16299940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 36 teeth length 160mm material 1.4305 SKU: 16299936](https://maedler.in/product/timing-bar-t5-36-teeth-length-160mm-material-1-4305-sku-16299936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 32 teeth length 160mm material 1.4305 SKU: 16299932](https://maedler.in/product/timing-bar-t5-32-teeth-length-160mm-material-1-4305-sku-16299932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 30 teeth length 160mm material 1.4305 SKU: 16299930](https://maedler.in/product/timing-bar-t5-30-teeth-length-160mm-material-1-4305-sku-16299930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 25 teeth length 160mm material 1.4305 SKU: 16299925](https://maedler.in/product/timing-bar-t5-25-teeth-length-160mm-material-1-4305-sku-16299925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 24 teeth length 160mm material 1.4305 SKU: 16299924](https://maedler.in/product/timing-bar-t5-24-teeth-length-160mm-material-1-4305-sku-16299924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 20 teeth length 160mm material 1.4305 SKU: 16299920](https://maedler.in/product/timing-bar-t5-20-teeth-length-160mm-material-1-4305-sku-16299920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 18 teeth length 140mm material 1.4305 SKU: 16299918](https://maedler.in/product/timing-bar-t5-18-teeth-length-140mm-material-1-4305-sku-16299918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 16 teeth length 140mm material 1.4305 SKU: 16299916](https://maedler.in/product/timing-bar-t5-16-teeth-length-140mm-material-1-4305-sku-16299916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 15 teeth length 140mm material 1.4305 SKU: 16299915](https://maedler.in/product/timing-bar-t5-15-teeth-length-140mm-material-1-4305-sku-16299915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 12 teeth length 140mm material 1.4305 SKU: 16299912](https://maedler.in/product/timing-bar-t5-12-teeth-length-140mm-material-1-4305-sku-16299912/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 100 teeth length 160mm material aluminium SKU: 16299900](https://maedler.in/product/timing-bar-t5-100-teeth-length-160mm-material-aluminium-sku-16299900/): Material: Aluminium similar EN AW2017A. - [timing bar T5 96 teeth length 160mm material aluminium SKU: 16299600](https://maedler.in/product/timing-bar-t5-96-teeth-length-160mm-material-aluminium-sku-16299600/): Material: Aluminium similar EN AW2017A. - [timing bar T5 90 teeth length 160mm material aluminium SKU: 16299000](https://maedler.in/product/timing-bar-t5-90-teeth-length-160mm-material-aluminium-sku-16299000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 84 teeth length 160mm material aluminium SKU: 16298400](https://maedler.in/product/timing-bar-t5-84-teeth-length-160mm-material-aluminium-sku-16298400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 80 teeth length 160mm material aluminium SKU: 16298000](https://maedler.in/product/timing-bar-t5-80-teeth-length-160mm-material-aluminium-sku-16298000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 72 teeth length 160mm material aluminium SKU: 16297200](https://maedler.in/product/timing-bar-t5-72-teeth-length-160mm-material-aluminium-sku-16297200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 65 teeth length 160mm material aluminium SKU: 16296500](https://maedler.in/product/timing-bar-t5-65-teeth-length-160mm-material-aluminium-sku-16296500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 60 teeth length 160mm material aluminium SKU: 16296000](https://maedler.in/product/timing-bar-t5-60-teeth-length-160mm-material-aluminium-sku-16296000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 50 teeth length 160mm material aluminium SKU: 16295000](https://maedler.in/product/timing-bar-t5-50-teeth-length-160mm-material-aluminium-sku-16295000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 48 teeth length 160mm material aluminium SKU: 16294800](https://maedler.in/product/timing-bar-t5-48-teeth-length-160mm-material-aluminium-sku-16294800/): Material: Aluminium similar EN AW2017A. - [timing bar T5 46 teeth length 160mm material aluminium SKU: 16294600](https://maedler.in/product/timing-bar-t5-46-teeth-length-160mm-material-aluminium-sku-16294600/): Material: Aluminium similar EN AW2017A. - [timing bar T5 45 teeth length 160mm material aluminium SKU: 16294500](https://maedler.in/product/timing-bar-t5-45-teeth-length-160mm-material-aluminium-sku-16294500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 44 teeth length 160mm material aluminium SKU: 16294400](https://maedler.in/product/timing-bar-t5-44-teeth-length-160mm-material-aluminium-sku-16294400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 42 teeth length 160mm material aluminium SKU: 16294200](https://maedler.in/product/timing-bar-t5-42-teeth-length-160mm-material-aluminium-sku-16294200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 40 teeth length 160mm material aluminium SKU: 16294000](https://maedler.in/product/timing-bar-t5-40-teeth-length-160mm-material-aluminium-sku-16294000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 38 teeth length 160mm material aluminium SKU: 16293800](https://maedler.in/product/timing-bar-t5-38-teeth-length-160mm-material-aluminium-sku-16293800/): Material: Aluminium similar EN AW2017A. - [timing bar T5 37 teeth length 160mm material aluminium SKU: 16293700](https://maedler.in/product/timing-bar-t5-37-teeth-length-160mm-material-aluminium-sku-16293700/): Material: Aluminium similar EN AW2017A. - [timing bar T5 36 teeth length 160mm material aluminium SKU: 16293600](https://maedler.in/product/timing-bar-t5-36-teeth-length-160mm-material-aluminium-sku-16293600/): Material: Aluminium similar EN AW2017A. - [timing bar T5 35 teeth length 160mm material aluminium SKU: 16293500](https://maedler.in/product/timing-bar-t5-35-teeth-length-160mm-material-aluminium-sku-16293500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 34 teeth length 160mm material aluminium SKU: 16293400](https://maedler.in/product/timing-bar-t5-34-teeth-length-160mm-material-aluminium-sku-16293400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 32 teeth length 160mm material aluminium SKU: 16293200](https://maedler.in/product/timing-bar-t5-32-teeth-length-160mm-material-aluminium-sku-16293200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 30 teeth length 160mm material aluminium SKU: 16293000](https://maedler.in/product/timing-bar-t5-30-teeth-length-160mm-material-aluminium-sku-16293000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 29 teeth length 160mm material aluminium SKU: 16292900](https://maedler.in/product/timing-bar-t5-29-teeth-length-160mm-material-aluminium-sku-16292900/): Material: Aluminium similar EN AW2017A. - [timing bar T5 28 teeth length 160mm material aluminium SKU: 16292800](https://maedler.in/product/timing-bar-t5-28-teeth-length-160mm-material-aluminium-sku-16292800/): Material: Aluminium similar EN AW2017A. - [timing bar T5 27 teeth length 160mm material aluminium SKU: 16292700](https://maedler.in/product/timing-bar-t5-27-teeth-length-160mm-material-aluminium-sku-16292700/): Material: Aluminium similar EN AW2017A. - [timing bar T5 26 teeth length 160mm material aluminium SKU: 16292600](https://maedler.in/product/timing-bar-t5-26-teeth-length-160mm-material-aluminium-sku-16292600/): Material: Aluminium similar EN AW2017A. - [timing bar T5 25 teeth length 160mm material aluminium SKU: 16292500](https://maedler.in/product/timing-bar-t5-25-teeth-length-160mm-material-aluminium-sku-16292500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 24 teeth length 160mm material aluminium SKU: 16292400](https://maedler.in/product/timing-bar-t5-24-teeth-length-160mm-material-aluminium-sku-16292400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 23 teeth length 160mm material aluminium SKU: 16292300](https://maedler.in/product/timing-bar-t5-23-teeth-length-160mm-material-aluminium-sku-16292300/): Material: Aluminium similar EN AW2017A. - [timing bar T5 22 teeth length 160mm material aluminium SKU: 16292200](https://maedler.in/product/timing-bar-t5-22-teeth-length-160mm-material-aluminium-sku-16292200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 21 teeth length 160mm material aluminium SKU: 16292100](https://maedler.in/product/timing-bar-t5-21-teeth-length-160mm-material-aluminium-sku-16292100/): Material: Aluminium similar EN AW2017A. - [timing bar T5 20 teeth length 160mm material aluminium SKU: 16292000](https://maedler.in/product/timing-bar-t5-20-teeth-length-160mm-material-aluminium-sku-16292000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 19 teeth length 140mm material aluminium SKU: 16291900](https://maedler.in/product/timing-bar-t5-19-teeth-length-140mm-material-aluminium-sku-16291900/): Material: Aluminium similar EN AW2017A. - [timing bar T5 18 teeth length 140mm material aluminium SKU: 16291800](https://maedler.in/product/timing-bar-t5-18-teeth-length-140mm-material-aluminium-sku-16291800/): Material: Aluminium similar EN AW2017A. - [timing bar T5 17 teeth length 140mm material aluminium SKU: 16291700](https://maedler.in/product/timing-bar-t5-17-teeth-length-140mm-material-aluminium-sku-16291700/): Material: Aluminium similar EN AW2017A. - [timing bar T5 16 teeth length 140mm material aluminium SKU: 16291600](https://maedler.in/product/timing-bar-t5-16-teeth-length-140mm-material-aluminium-sku-16291600/): Material: Aluminium similar EN AW2017A. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 16mm 31 T10/15-2 SKU: 16421500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-16mm-31-t10-15-2-sku-16421500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 16mm 31 T10/14-2 SKU: 16421400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-16mm-31-t10-14-2-sku-16421400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 16 mm 31 T10/13-2 SKU: 16421300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-16-mm-31-t10-13-2-sku-16421300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 16mm 31 T10/12-2 SKU: 16421200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-16mm-31-t10-12-2-sku-16421200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 16 mm 31 T10/11-2 SKU: 16421100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-16-mm-31-t10-11-2-sku-16421100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 16 mm 31 T10/10-2 SKU: 16421000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-16-mm-31-t10-10-2-sku-16421000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 96 teeth for belt width 40mm 55 T10/96-0 SKU: 16419600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-96-teeth-for-belt-width-40mm-55-t10-96-0-sku-16419600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 84 teeth for belt width 40mm 55 T10/84-0 SKU: 16418400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-84-teeth-for-belt-width-40mm-55-t10-84-0-sku-16418400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 40mm 55 T10/72-0 SKU: 16417200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-40mm-55-t10-72-0-sku-16417200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 40mm 55 T10/60-0 SKU: 16416000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-40mm-55-t10-60-0-sku-16416000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 40mm 55 T10/48-0 SKU: 16414800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-40mm-55-t10-48-0-sku-16414800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 40mm 55 T10/44-0 SKU: 16414400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-40mm-55-t10-44-0-sku-16414400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 40mm 55 T10/40-2 SKU: 16414000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-40mm-55-t10-40-2-sku-16414000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 40mm 55 T10/36-2 SKU: 16413600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-40mm-55-t10-36-2-sku-16413600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 40mm 55 T10/32-2 SKU: 16413200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-40mm-55-t10-32-2-sku-16413200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 40mm 55 T10/30-2 SKU: 16413000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-40mm-55-t10-30-2-sku-16413000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 40mm 55 T10/28-2 SKU: 16412800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-40mm-55-t10-28-2-sku-16412800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 40mm 55 T10/27-2 SKU: 16412700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-40mm-55-t10-27-2-sku-16412700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 40mm 55 T10/26-2 SKU: 16412600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-40mm-55-t10-26-2-sku-16412600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 40mm 55 T10/25-2 SKU: 16412500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-40mm-55-t10-25-2-sku-16412500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 40mm 55 T10/24-2 SKU: 16412400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-40mm-55-t10-24-2-sku-16412400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 40mm 55 T10/22-2 SKU: 16412200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-40mm-55-t10-22-2-sku-16412200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 40mm 55 T10/20-2 SKU: 16412000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-40mm-55-t10-20-2-sku-16412000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 40mm 55 T10/19-2 SKU: 16411900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-40mm-55-t10-19-2-sku-16411900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 40mm 55 T10/18-2 SKU: 16411800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-40mm-55-t10-18-2-sku-16411800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 40mm 55 T10/17-2 SKU: 16411700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-40mm-55-t10-17-2-sku-16411700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 40mm 55 T10/16-2 SKU: 16411600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-40mm-55-t10-16-2-sku-16411600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 40mm 55 T10/15-2 SKU: 16411500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-40mm-55-t10-15-2-sku-16411500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 40mm 55 T10/14-2 SKU: 16411400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-40mm-55-t10-14-2-sku-16411400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 40mm 55 T10/13-2 SKU: 16411300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-40mm-55-t10-13-2-sku-16411300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 40mm 55 T10/12-2 SKU: 16411200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-40mm-55-t10-12-2-sku-16411200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 40mm 55 T10/11-2 SKU: 16411100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-40mm-55-t10-11-2-sku-16411100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 40mm 55 T10/10-2 SKU: 16411000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-40mm-55-t10-10-2-sku-16411000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [timing bar AT3 96 teeth length 160mm material aluminium SKU: 16399600](https://maedler.in/product/timing-bar-at3-96-teeth-length-160mm-material-aluminium-sku-16399600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 84 teeth length 160mm material aluminium SKU: 16398400](https://maedler.in/product/timing-bar-at3-84-teeth-length-160mm-material-aluminium-sku-16398400/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 72 teeth length 160mm material aluminium SKU: 16397200](https://maedler.in/product/timing-bar-at3-72-teeth-length-160mm-material-aluminium-sku-16397200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 70 teeth length 160mm material aluminium SKU: 16397000](https://maedler.in/product/timing-bar-at3-70-teeth-length-160mm-material-aluminium-sku-16397000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 65 teeth length 160mm material aluminium SKU: 16396500](https://maedler.in/product/timing-bar-at3-65-teeth-length-160mm-material-aluminium-sku-16396500/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 60 teeth length 160mm material aluminium SKU: 16396000](https://maedler.in/product/timing-bar-at3-60-teeth-length-160mm-material-aluminium-sku-16396000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 56 teeth length 160mm material aluminium SKU: 16395600](https://maedler.in/product/timing-bar-at3-56-teeth-length-160mm-material-aluminium-sku-16395600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 52 teeth length 160mm material aluminium SKU: 16395200](https://maedler.in/product/timing-bar-at3-52-teeth-length-160mm-material-aluminium-sku-16395200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 50 teeth length 160mm material aluminium SKU: 16395000](https://maedler.in/product/timing-bar-at3-50-teeth-length-160mm-material-aluminium-sku-16395000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 48 teeth length 160mm material aluminium SKU: 16394800](https://maedler.in/product/timing-bar-at3-48-teeth-length-160mm-material-aluminium-sku-16394800/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 44 teeth length 160mm material aluminium SKU: 16394400](https://maedler.in/product/timing-bar-at3-44-teeth-length-160mm-material-aluminium-sku-16394400/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 42 teeth length 160mm material aluminium SKU: 16394200](https://maedler.in/product/timing-bar-at3-42-teeth-length-160mm-material-aluminium-sku-16394200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 40 teeth length 160mm material aluminium SKU: 16394000](https://maedler.in/product/timing-bar-at3-40-teeth-length-160mm-material-aluminium-sku-16394000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 38 teeth length 160mm material aluminium SKU: 16393800](https://maedler.in/product/timing-bar-at3-38-teeth-length-160mm-material-aluminium-sku-16393800/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 36 teeth length 160mm material aluminium SKU: 16393600](https://maedler.in/product/timing-bar-at3-36-teeth-length-160mm-material-aluminium-sku-16393600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 35 teeth length 160mm material aluminium SKU: 16393500](https://maedler.in/product/timing-bar-at3-35-teeth-length-160mm-material-aluminium-sku-16393500/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 34 teeth length 160mm material aluminium SKU: 16393400](https://maedler.in/product/timing-bar-at3-34-teeth-length-160mm-material-aluminium-sku-16393400/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 32 teeth length 160mm material aluminium SKU: 16393200](https://maedler.in/product/timing-bar-at3-32-teeth-length-160mm-material-aluminium-sku-16393200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 30 teeth length 140mm material aluminium SKU: 16393000](https://maedler.in/product/timing-bar-at3-30-teeth-length-140mm-material-aluminium-sku-16393000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 28 teeth length 140mm material aluminium SKU: 16392800](https://maedler.in/product/timing-bar-at3-28-teeth-length-140mm-material-aluminium-sku-16392800/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 27 teeth length 140mm material aluminium SKU: 16392700](https://maedler.in/product/timing-bar-at3-27-teeth-length-140mm-material-aluminium-sku-16392700/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 26 teeth length 140mm material aluminium SKU: 16392600](https://maedler.in/product/timing-bar-at3-26-teeth-length-140mm-material-aluminium-sku-16392600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 25 teeth length 140mm material aluminium SKU: 16392500](https://maedler.in/product/timing-bar-at3-25-teeth-length-140mm-material-aluminium-sku-16392500/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 24 teeth length 140mm material aluminium SKU: 16392400](https://maedler.in/product/timing-bar-at3-24-teeth-length-140mm-material-aluminium-sku-16392400/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 23 teeth length 140mm material aluminium SKU: 16392300](https://maedler.in/product/timing-bar-at3-23-teeth-length-140mm-material-aluminium-sku-16392300/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 22 teeth length 140mm material aluminium SKU: 16392200](https://maedler.in/product/timing-bar-at3-22-teeth-length-140mm-material-aluminium-sku-16392200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 21 teeth length 140mm material aluminium SKU: 16392100](https://maedler.in/product/timing-bar-at3-21-teeth-length-140mm-material-aluminium-sku-16392100/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 20 teeth length 140mm material aluminium SKU: 16392000](https://maedler.in/product/timing-bar-at3-20-teeth-length-140mm-material-aluminium-sku-16392000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 19 teeth length 140mm material aluminium SKU: 16391900](https://maedler.in/product/timing-bar-at3-19-teeth-length-140mm-material-aluminium-sku-16391900/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 18 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 16391800](https://maedler.in/product/timing-bar-at3-18-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-16391800/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 17 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 16391700](https://maedler.in/product/timing-bar-at3-17-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-16391700/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 16 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 16391600](https://maedler.in/product/timing-bar-at3-16-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-16391600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 15 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 16391500](https://maedler.in/product/timing-bar-at3-15-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-16391500/): Material: Aluminium similar EN AW2017A. - [Polyurethane timing belt AT3 width 10mm Lw 1011mm 337 teeth 10AT3/1011 SKU: 16371900](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-1011mm-337-teeth-10at3-1011-sku-16371900/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 900mm 300 teeth 10AT3/900 SKU: 16371800](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-900mm-300-teeth-10at3-900-sku-16371800/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 816mm 272 teeth 6 AT3/816 SKU: 16371700](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-816mm-272-teeth-6-at3-816-sku-16371700/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 714mm 238 teeth 10AT3/714 SKU: 16371500](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-714mm-238-teeth-10at3-714-sku-16371500/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 639mm 213 teeth 10AT3/639 SKU: 16371400](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-639mm-213-teeth-10at3-639-sku-16371400/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 600mm 200 teeth 10AT3/600 SKU: 16371300](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-600mm-200-teeth-10at3-600-sku-16371300/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 549mm 183 teeth 10AT3/549 SKU: 16371200](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-549mm-183-teeth-10at3-549-sku-16371200/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 501mm 167 teeth 10AT3/501 SKU: 16371100](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-501mm-167-teeth-10at3-501-sku-16371100/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 450mm 150 teeth 10AT3/450 SKU: 16371000](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-450mm-150-teeth-10at3-450-sku-16371000/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 417mm 139 teeth 10AT3/417 SKU: 16370900](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-417mm-139-teeth-10at3-417-sku-16370900/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 399mm 133 teeth 10AT3/399 SKU: 16370800](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-399mm-133-teeth-10at3-399-sku-16370800/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 351mm 117 teeth 10AT3/351 SKU: 16370700](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-351mm-117-teeth-10at3-351-sku-16370700/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 300mm 100 teeth 10AT3/300 SKU: 16370600](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-300mm-100-teeth-10at3-300-sku-16370600/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 270mm 90 teeth 10AT3/270 SKU: 16370500](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-270mm-90-teeth-10at3-270-sku-16370500/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 267mm 89 teeth 10AT3/267 SKU: 16370400](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-267mm-89-teeth-10at3-267-sku-16370400/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 252mm 84 teeth 10AT3/252 SKU: 16370300](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-252mm-84-teeth-10at3-252-sku-16370300/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 201mm 67 teeth 10AT3/201 SKU: 16370200](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-201mm-67-teeth-10at3-201-sku-16370200/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 150mm 50 teeth 10AT3/150 SKU: 16370100](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-150mm-50-teeth-10at3-150-sku-16370100/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 1011mm 337 teeth 6 AT3/1011 SKU: 16361900](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-1011mm-337-teeth-6-at3-1011-sku-16361900/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 900mm 300 teeth 6 AT3/900 SKU: 16361800](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-900mm-300-teeth-6-at3-900-sku-16361800/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 816mm 272 teeth 6 AT3/816 SKU: 16361700](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-816mm-272-teeth-6-at3-816-sku-16361700/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 714mm 238 teeth 6 AT3/714 SKU: 16361500](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-714mm-238-teeth-6-at3-714-sku-16361500/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 639mm 213 teeth 6 AT3/639 SKU: 16361400](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-639mm-213-teeth-6-at3-639-sku-16361400/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 600mm 200 teeth 6 AT3/600 SKU: 16361300](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-600mm-200-teeth-6-at3-600-sku-16361300/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 549mm 183 teeth 6 AT3/549 SKU: 16361200](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-549mm-183-teeth-6-at3-549-sku-16361200/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 501mm 167 teeth 6 AT3/501 SKU: 16361100](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-501mm-167-teeth-6-at3-501-sku-16361100/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 450mm 150 teeth 6 AT3/450 SKU: 16361000](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-450mm-150-teeth-6-at3-450-sku-16361000/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 417mm 139 teeth 6 AT3/417 SKU: 16360900](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-417mm-139-teeth-6-at3-417-sku-16360900/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 399mm 133 teeth 6 AT3/399 SKU: 16360800](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-399mm-133-teeth-6-at3-399-sku-16360800/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 351mm 117 teeth 6 AT3/351 SKU: 16360700](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-351mm-117-teeth-6-at3-351-sku-16360700/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 300mm 100 teeth 6 AT3/300 SKU: 16360600](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-300mm-100-teeth-6-at3-300-sku-16360600/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 270mm 90 teeth 6 AT3/270 SKU: 16360500](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-270mm-90-teeth-6-at3-270-sku-16360500/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 267mm 89 teeth 6 AT3/267 SKU: 16360400](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-267mm-89-teeth-6-at3-267-sku-16360400/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 252mm 84 teeth 6 AT3/252 SKU: 16360300](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-252mm-84-teeth-6-at3-252-sku-16360300/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 50 mm 66 T10/72-0 SKU: 16457200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-50-mm-66-t10-72-0-sku-16457200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 50mm 66 T10/60-0 SKU: 16456000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-50mm-66-t10-60-0-sku-16456000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 50mm 66 T10/48-0 SKU: 16454800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-50mm-66-t10-48-0-sku-16454800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 50mm 66 T10/44-0 SKU: 16454400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-50mm-66-t10-44-0-sku-16454400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 50mm 66 T10/40-2 SKU: 16454000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-50mm-66-t10-40-2-sku-16454000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 50mm 66 T10/36-2 SKU: 16453600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-50mm-66-t10-36-2-sku-16453600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 50mm 66 T10/32-2 SKU: 16453200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-50mm-66-t10-32-2-sku-16453200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 50mm 66 T10/30-2 SKU: 16453000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-50mm-66-t10-30-2-sku-16453000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 50mm 66 T10/28-2 SKU: 16452800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-50mm-66-t10-28-2-sku-16452800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 50mm 66 T10/27-2 SKU: 16452700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-50mm-66-t10-27-2-sku-16452700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 50mm 66 T10/26-2 SKU: 16452600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-50mm-66-t10-26-2-sku-16452600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 50mm 66 T10/25-2 SKU: 16452500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-50mm-66-t10-25-2-sku-16452500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 50mm 66 T10/24-2 SKU: 16452400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-50mm-66-t10-24-2-sku-16452400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 50mm 66 T10/22-2 SKU: 16452200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-50mm-66-t10-22-2-sku-16452200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 50mm 66 T10/20-2 SKU: 16452000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-50mm-66-t10-20-2-sku-16452000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 50mm 66 T10/19-2 SKU: 16451900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-50mm-66-t10-19-2-sku-16451900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 50mm 66 T10/18-2 SKU: 16451800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-50mm-66-t10-18-2-sku-16451800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 50 mm 66 T10/17-2 SKU: 16451700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-50-mm-66-t10-17-2-sku-16451700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 50mm 66 T10/16-2 SKU: 16451600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-50mm-66-t10-16-2-sku-16451600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 50mm 66 T10/15-2 SKU: 16451500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-50mm-66-t10-15-2-sku-16451500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 50mm 66 T10/14-2 SKU: 16451400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-50mm-66-t10-14-2-sku-16451400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 50 mm 66 T10/13-2 SKU: 16451300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-50-mm-66-t10-13-2-sku-16451300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 50mm 66 T10/12-2 SKU: 16451200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-50mm-66-t10-12-2-sku-16451200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 50 mm 66 T10/11-2 SKU: 16451100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-50-mm-66-t10-11-2-sku-16451100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 50 mm 66 T10/10-2 SKU: 16451000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-50-mm-66-t10-10-2-sku-16451000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 96 teeth for belt width 32 mm 47 T10/96-0 SKU: 16449600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-96-teeth-for-belt-width-32-mm-47-t10-96-0-sku-16449600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 84 teeth for belt width 32 mm 47 T10/84-0 SKU: 16448400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-84-teeth-for-belt-width-32-mm-47-t10-84-0-sku-16448400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 32 mm 47 T10/72-0 SKU: 16447200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-32-mm-47-t10-72-0-sku-16447200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 32mm 47 T10/60-0 SKU: 16446000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-32mm-47-t10-60-0-sku-16446000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 32mm 47 T10/48-0 SKU: 16444800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-32mm-47-t10-48-0-sku-16444800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 32mm 47 T10/44-0 SKU: 16444400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-32mm-47-t10-44-0-sku-16444400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 32mm 47 T10/40-2 SKU: 16444000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-32mm-47-t10-40-2-sku-16444000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 32mm 47 T10/36-2 SKU: 16443600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-32mm-47-t10-36-2-sku-16443600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 32mm 47 T10/32-2 SKU: 16443200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-32mm-47-t10-32-2-sku-16443200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 32mm 47 T10/30-2 SKU: 16443000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-32mm-47-t10-30-2-sku-16443000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 32mm 47 T10/28-2 SKU: 16442800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-32mm-47-t10-28-2-sku-16442800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 32mm 47 T10/27-2 SKU: 16442700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-32mm-47-t10-27-2-sku-16442700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 32mm 47 T10/26-2 SKU: 16442600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-32mm-47-t10-26-2-sku-16442600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 32mm 47 T10/25-2 SKU: 16442500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-32mm-47-t10-25-2-sku-16442500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 32mm 47 T10/24-2 SKU: 16442400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-32mm-47-t10-24-2-sku-16442400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 32mm 47 T10/22-2 SKU: 16442200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-32mm-47-t10-22-2-sku-16442200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 32mm 47 T10/20-2 SKU: 16442000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-32mm-47-t10-20-2-sku-16442000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 32mm 47 T10/19-2 SKU: 16441900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-32mm-47-t10-19-2-sku-16441900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 32mm 47 T10/18-2 SKU: 16441800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-32mm-47-t10-18-2-sku-16441800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 32 mm 47 T10/17-2 SKU: 16441700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-32-mm-47-t10-17-2-sku-16441700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 32mm 47 T10/16-2 SKU: 16441600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-32mm-47-t10-16-2-sku-16441600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 32mm 47 T10/15-2 SKU: 16441500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-32mm-47-t10-15-2-sku-16441500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 32mm 47 T10/14-2 SKU: 16441400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-32mm-47-t10-14-2-sku-16441400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 32 mm 47 T10/13-2 SKU: 16441300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-32-mm-47-t10-13-2-sku-16441300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 32mm 47 T10/12-2 SKU: 16441200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-32mm-47-t10-12-2-sku-16441200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 32 mm 47 T10/11-2 SKU: 16441100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-32-mm-47-t10-11-2-sku-16441100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 32 mm 47 T10/10-2 SKU: 16441000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-32-mm-47-t10-10-2-sku-16441000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 96 teeth for belt width 25 mm 40 T10/96-0 SKU: 16439600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-96-teeth-for-belt-width-25-mm-40-t10-96-0-sku-16439600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 84 teeth for belt width 25 mm 40 T10/84-0 SKU: 16438400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-84-teeth-for-belt-width-25-mm-40-t10-84-0-sku-16438400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 25 mm 40 T10/72-0 SKU: 16437200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-25-mm-40-t10-72-0-sku-16437200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 25mm 40 T10/60-0 SKU: 16436000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-25mm-40-t10-60-0-sku-16436000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 25mm 40 T10/48-0 SKU: 16434800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-25mm-40-t10-48-0-sku-16434800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 25mm 40 T10/44-0 SKU: 16434400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-25mm-40-t10-44-0-sku-16434400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 25mm 40 T10/40-2 SKU: 16434000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-25mm-40-t10-40-2-sku-16434000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 25mm 40 T10/36-2 SKU: 16433600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-25mm-40-t10-36-2-sku-16433600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 25mm 40 T10/32-2 SKU: 16433200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-25mm-40-t10-32-2-sku-16433200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 25mm 40 T10/30-2 SKU: 16433000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-25mm-40-t10-30-2-sku-16433000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 25mm 40 T10/28-2 SKU: 16432800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-25mm-40-t10-28-2-sku-16432800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 25mm 40 T10/27-2 SKU: 16432700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-25mm-40-t10-27-2-sku-16432700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 25mm 40 T10/26-2 SKU: 16432600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-25mm-40-t10-26-2-sku-16432600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 25mm 40 T10/25-2 SKU: 16432500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-25mm-40-t10-25-2-sku-16432500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 25mm 40 T10/24-2 SKU: 16432400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-25mm-40-t10-24-2-sku-16432400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 25mm 40 T10/22-2 SKU: 16432200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-25mm-40-t10-22-2-sku-16432200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 25mm 40 T10/20-2 SKU: 16432000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-25mm-40-t10-20-2-sku-16432000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 25mm 40 T10/19-2 SKU: 16431900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-25mm-40-t10-19-2-sku-16431900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 25mm 40 T10/18-2 SKU: 16431800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-25mm-40-t10-18-2-sku-16431800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 25 mm 40 T10/17-2 SKU: 16431700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-25-mm-40-t10-17-2-sku-16431700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 25mm 40 T10/16-2 SKU: 16431600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-25mm-40-t10-16-2-sku-16431600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 25mm 40 T10/15-2 SKU: 16431500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-25mm-40-t10-15-2-sku-16431500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 25mm 40 T10/14-2 SKU: 16431400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-25mm-40-t10-14-2-sku-16431400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 25 mm 40 T10/13-2 SKU: 16431300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-25-mm-40-t10-13-2-sku-16431300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 25mm 40 T10/12-2 SKU: 16431200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-25mm-40-t10-12-2-sku-16431200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 25 mm 40 T10/11-2 SKU: 16431100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-25-mm-40-t10-11-2-sku-16431100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 25 mm 40 T10/10-2 SKU: 16431000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-25-mm-40-t10-10-2-sku-16431000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 96 teeth for belt width 16 mm 31 T10/96-0 SKU: 16429600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-96-teeth-for-belt-width-16-mm-31-t10-96-0-sku-16429600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 84 teeth for belt width 16 mm 31 T10/84-0 SKU: 16428400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-84-teeth-for-belt-width-16-mm-31-t10-84-0-sku-16428400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 16 mm 31 T10/72-0 SKU: 16427200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-16-mm-31-t10-72-0-sku-16427200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 16mm 31 T10/60-0 SKU: 16426000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-16mm-31-t10-60-0-sku-16426000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 16mm 31 T10/48-0 SKU: 16424800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-16mm-31-t10-48-0-sku-16424800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 16mm 31 T10/44-0 SKU: 16424400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-16mm-31-t10-44-0-sku-16424400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 16mm 31 T10/40-2 SKU: 16424000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-16mm-31-t10-40-2-sku-16424000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 16mm 31 T10/36-2 SKU: 16423600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-16mm-31-t10-36-2-sku-16423600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 16mm 31 T10/32-2 SKU: 16423200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-16mm-31-t10-32-2-sku-16423200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 16mm 31 T10/30-2 SKU: 16423000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-16mm-31-t10-30-2-sku-16423000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 16mm 31 T10/28-2 SKU: 16422800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-16mm-31-t10-28-2-sku-16422800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 16mm 31 T10/27-2 SKU: 16422700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-16mm-31-t10-27-2-sku-16422700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 16mm 31 T10/26-2 SKU: 16422600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-16mm-31-t10-26-2-sku-16422600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 16mm 31 T10/25-2 SKU: 16422500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-16mm-31-t10-25-2-sku-16422500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 16mm 31 T10/24-2 SKU: 16422400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-16mm-31-t10-24-2-sku-16422400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 16mm 31 T10/22-2 SKU: 16422200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-16mm-31-t10-22-2-sku-16422200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 16mm 31 T10/20-2 SKU: 16422000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-16mm-31-t10-20-2-sku-16422000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 16mm 31 T10/19-2 SKU: 16421900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-16mm-31-t10-19-2-sku-16421900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 16mm 31 T10/18-2 SKU: 16421800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-16mm-31-t10-18-2-sku-16421800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 16 mm 31 T10/17-2 SKU: 16421700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-16-mm-31-t10-17-2-sku-16421700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 16mm 31 T10/16-2 SKU: 16421600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-16mm-31-t10-16-2-sku-16421600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Polyurethane timing belt T10 width 25mm Lw 1500mm 150 teeth 25 T10/1500 SKU: 16474400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1500mm-150-teeth-25-t10-1500-sku-16474400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1460mm 146 teeth 25 T10/1460 SKU: 16474300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1460mm-146-teeth-25-t10-1460-sku-16474300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1450mm 145 teeth 25 T10/1450 SKU: 16474200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1450mm-145-teeth-25-t10-1450-sku-16474200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1440mm 144 teeth 25 T10/1440 SKU: 16474100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1440mm-144-teeth-25-t10-1440-sku-16474100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1420mm 142 teeth 25 T10/1420 SKU: 16474000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1420mm-142-teeth-25-t10-1420-sku-16474000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1400mm 140 teeth 25 T10/1400 SKU: 16473900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1400mm-140-teeth-25-t10-1400-sku-16473900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1390mm 139 teeth 25 T10/1390 SKU: 16473800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1390mm-139-teeth-25-t10-1390-sku-16473800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1350mm 135 teeth 25 T10/1350 SKU: 16473700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1350mm-135-teeth-25-t10-1350-sku-16473700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1320mm 132 teeth 25 T10/1320 SKU: 16473600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1320mm-132-teeth-25-t10-1320-sku-16473600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1300mm 130 teeth 25 T10/1300 SKU: 16473500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1300mm-130-teeth-25-t10-1300-sku-16473500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1250mm 125 teeth 25 T10/1250 SKU: 16473400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1250mm-125-teeth-25-t10-1250-sku-16473400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1240mm 124 teeth 25 T10/1240 SKU: 16473300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1240mm-124-teeth-25-t10-1240-sku-16473300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1210mm 121 teeth 25 T10/1210 SKU: 16473200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1210mm-121-teeth-25-t10-1210-sku-16473200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1150mm 115 teeth 25 T10/1150 SKU: 16473100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1150mm-115-teeth-25-t10-1150-sku-16473100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1140mm 114 teeth 25 T10/1140 SKU: 16473000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1140mm-114-teeth-25-t10-1140-sku-16473000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1110mm 111 teeth 25 T10/1110 SKU: 16472900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1110mm-111-teeth-25-t10-1110-sku-16472900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1080mm 108 teeth 25 T10/1080 SKU: 16472800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1080mm-108-teeth-25-t10-1080-sku-16472800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1010mm 101 teeth 25 T10/1010 SKU: 16472700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1010mm-101-teeth-25-t10-1010-sku-16472700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 980mm 98 teeth 25 T10/980 SKU: 16472600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-980mm-98-teeth-25-t10-980-sku-16472600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 970mm 97 teeth 25 T10/970 SKU: 16472500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-970mm-97-teeth-25-t10-970-sku-16472500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 960mm 96 teeth 25 T10/960 SKU: 16472400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-960mm-96-teeth-25-t10-960-sku-16472400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 920mm 92 teeth 25 T10/920 SKU: 16472300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-920mm-92-teeth-25-t10-920-sku-16472300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 900mm 90 teeth 25 T10/900 SKU: 16472200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-900mm-90-teeth-25-t10-900-sku-16472200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 890mm 89 teeth 25 T10/890 SKU: 16472100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-890mm-89-teeth-25-t10-890-sku-16472100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 880mm 88 teeth 25 T10/880 SKU: 16472000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-880mm-88-teeth-25-t10-880-sku-16472000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 840mm 84 teeth 25 T10/840 SKU: 16471900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-840mm-84-teeth-25-t10-840-sku-16471900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 810mm 81 teeth 25 T10/810 SKU: 16471800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-810mm-81-teeth-25-t10-810-sku-16471800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 780mm 78 teeth 25 T10/780 SKU: 16471700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-780mm-78-teeth-25-t10-780-sku-16471700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 750mm 75 teeth 25 T10/750 SKU: 16471600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-750mm-75-teeth-25-t10-750-sku-16471600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 720mm 72 teeth 25 T10/720 SKU: 16471500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-720mm-72-teeth-25-t10-720-sku-16471500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 700mm 70 teeth 25 T10/700 SKU: 16471400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-700mm-70-teeth-25-t10-700-sku-16471400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 690mm 69 teeth 25 T10/690 SKU: 16471300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-690mm-69-teeth-25-t10-690-sku-16471300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 660mm 66 teeth 25 T10/660 SKU: 16471200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-660mm-66-teeth-25-t10-660-sku-16471200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 630mm 63 teeth 25 T10/630 SKU: 16471100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-630mm-63-teeth-25-t10-630-sku-16471100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 610mm 61 teeth 25 T10/610 SKU: 16471000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-610mm-61-teeth-25-t10-610-sku-16471000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 560mm 56 teeth 25 T10/560 SKU: 16470900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-560mm-56-teeth-25-t10-560-sku-16470900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 530mm 53 teeth 25 T10/530 SKU: 16470800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-530mm-53-teeth-25-t10-530-sku-16470800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 500mm 50 teeth 25 T10/500 SKU: 16470700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-500mm-50-teeth-25-t10-500-sku-16470700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 450mm 45 teeth 25 T10/450 SKU: 16470600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-450mm-45-teeth-25-t10-450-sku-16470600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 440mm 44 teeth 25 T10/440 SKU: 16470500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-440mm-44-teeth-25-t10-440-sku-16470500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 410mm 41 teeth 25 T10/410 SKU: 16470400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-410mm-41-teeth-25-t10-410-sku-16470400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 400mm 40 teeth 25 T10/400 SKU: 16470300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-400mm-40-teeth-25-t10-400-sku-16470300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 370mm 37 teeth 25 T10/370 SKU: 16470200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-370mm-37-teeth-25-t10-370-sku-16470200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 260mm 26 teeth 25 T10/260 SKU: 16470100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-260mm-26-teeth-25-t10-260-sku-16470100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm 25T10 open length PAZ = Polyamide fabric on tooth side SKU: 16470001](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-25t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16470001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 25mm 25T10 open length SKU: 16470000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-25t10-open-length-sku-16470000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T10 belt width 16mm SKU: 16469900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-16mm-sku-16469900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T10 width 16mm Lw 2250mm 225 teeth 16 T10/2250 SKU: 16465100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-2250mm-225-teeth-16-t10-2250-sku-16465100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1960mm 196 teeth 16 T10/1960 SKU: 16465000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1960mm-196-teeth-16-t10-1960-sku-16465000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1880mm 188 teeth 16 T10/1880 SKU: 16464900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1880mm-188-teeth-16-t10-1880-sku-16464900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1780mm 178 teeth 16 T10/1780 SKU: 16464800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1780mm-178-teeth-16-t10-1780-sku-16464800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1750mm 175 teeth 16 T10/1750 SKU: 16464700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1750mm-175-teeth-16-t10-1750-sku-16464700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1610mm 161 teeth 16 T10/1610 SKU: 16464600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1610mm-161-teeth-16-t10-1610-sku-16464600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1560mm 156 teeth 16 T10/1560 SKU: 16464500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1560mm-156-teeth-16-t10-1560-sku-16464500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1500mm 150 teeth 16 T10/1500 SKU: 16464400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1500mm-150-teeth-16-t10-1500-sku-16464400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1460mm 146 teeth 16 T10/1460 SKU: 16464300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1460mm-146-teeth-16-t10-1460-sku-16464300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1450mm 145 teeth 16 T10/1450 SKU: 16464200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1450mm-145-teeth-16-t10-1450-sku-16464200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1440mm 144 teeth 16 T10/1440 SKU: 16464100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1440mm-144-teeth-16-t10-1440-sku-16464100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1420mm 142 teeth 16 T10/1420 SKU: 16464000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1420mm-142-teeth-16-t10-1420-sku-16464000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1400mm 140 teeth 16 T10/1400 SKU: 16463900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1400mm-140-teeth-16-t10-1400-sku-16463900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1390mm 139 teeth 16 T10/1390 SKU: 16463800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1390mm-139-teeth-16-t10-1390-sku-16463800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1350mm 135 teeth 16 T10/1350 SKU: 16463700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1350mm-135-teeth-16-t10-1350-sku-16463700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1320mm 132 teeth 16 T10/1320 SKU: 16463600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1320mm-132-teeth-16-t10-1320-sku-16463600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1300mm 130 teeth 16 T10/1300 SKU: 16463500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1300mm-130-teeth-16-t10-1300-sku-16463500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1250mm 125 teeth 16 T10/1250 SKU: 16463400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1250mm-125-teeth-16-t10-1250-sku-16463400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1240mm 124 teeth 16 T10/1240 SKU: 16463300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1240mm-124-teeth-16-t10-1240-sku-16463300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1210mm 121 teeth 16 T10/1210 SKU: 16463200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1210mm-121-teeth-16-t10-1210-sku-16463200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1150mm 115 teeth 16 T10/1150 SKU: 16463100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1150mm-115-teeth-16-t10-1150-sku-16463100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1140mm 114 teeth 16 T10/1140 SKU: 16463000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1140mm-114-teeth-16-t10-1140-sku-16463000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1110mm 111 teeth 16 T10/1110 SKU: 16462900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1110mm-111-teeth-16-t10-1110-sku-16462900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1080mm 108 teeth 16 T10/1080 SKU: 16462800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1080mm-108-teeth-16-t10-1080-sku-16462800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1010mm 101 teeth 16 T10/1010 SKU: 16462700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1010mm-101-teeth-16-t10-1010-sku-16462700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 980mm 98 teeth 16 T10/980 SKU: 16462600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-980mm-98-teeth-16-t10-980-sku-16462600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 970mm 97 teeth 16 T10/970 SKU: 16462500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-970mm-97-teeth-16-t10-970-sku-16462500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 960mm 96 teeth 16 T10/960 SKU: 16462400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-960mm-96-teeth-16-t10-960-sku-16462400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 920mm 92 teeth 16 T10/920 SKU: 16462300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-920mm-92-teeth-16-t10-920-sku-16462300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 900mm 90 teeth 16 T10/900 SKU: 16462200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-900mm-90-teeth-16-t10-900-sku-16462200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 890mm 89 teeth 16 T10/890 SKU: 16462100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-890mm-89-teeth-16-t10-890-sku-16462100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 880mm 88 teeth 16 T10/880 SKU: 16462000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-880mm-88-teeth-16-t10-880-sku-16462000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 840mm 84 teeth 16 T10/840 SKU: 16461900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-840mm-84-teeth-16-t10-840-sku-16461900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 810mm 81 teeth 16 T10/810 SKU: 16461800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-810mm-81-teeth-16-t10-810-sku-16461800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 780mm 78 teeth 16 T10/780 SKU: 16461700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-780mm-78-teeth-16-t10-780-sku-16461700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 750mm 75 teeth 16 T10/750 SKU: 16461600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-750mm-75-teeth-16-t10-750-sku-16461600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 720mm 72 teeth 16 T10/720 SKU: 16461500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-720mm-72-teeth-16-t10-720-sku-16461500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 700mm 70 teeth 16 T10/700 SKU: 16461400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-700mm-70-teeth-16-t10-700-sku-16461400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 690mm 69 teeth 16 T10/690 SKU: 16461300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-690mm-69-teeth-16-t10-690-sku-16461300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 660mm 66 teeth 16 T10/660 SKU: 16461200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-660mm-66-teeth-16-t10-660-sku-16461200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 630mm 63 teeth 16 T10/630 SKU: 16461100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-630mm-63-teeth-16-t10-630-sku-16461100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 610mm 61 teeth 16 T10/610 SKU: 16461000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-610mm-61-teeth-16-t10-610-sku-16461000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 560mm 56 teeth 16 T10/560 SKU: 16460900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-560mm-56-teeth-16-t10-560-sku-16460900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 530mm 53 teeth 16 T10/530 SKU: 16460800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-530mm-53-teeth-16-t10-530-sku-16460800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 500mm 50 teeth 16 T10/500 SKU: 16460700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-500mm-50-teeth-16-t10-500-sku-16460700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 450mm 45 teeth 16 T10/450 SKU: 16460600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-450mm-45-teeth-16-t10-450-sku-16460600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 440mm 44 teeth 16 T10/440 SKU: 16460500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-440mm-44-teeth-16-t10-440-sku-16460500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 410mm 41 teeth 16 T10/410 SKU: 16460400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-410mm-41-teeth-16-t10-410-sku-16460400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 400mm 40 teeth 16 T10/400 SKU: 16460300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-400mm-40-teeth-16-t10-400-sku-16460300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 370mm 37 teeth 16 T10/370 SKU: 16460200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-370mm-37-teeth-16-t10-370-sku-16460200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 260mm 26 teeth 16 T10/260 SKU: 16460100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-260mm-26-teeth-16-t10-260-sku-16460100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm 16T10 open length PAZ = Polyamide fabric on tooth side SKU: 16460001](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-16t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16460001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 16mm 16 T10 open length SKU: 16460000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-16-t10-open-length-sku-16460000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T10 width 32mm Lw 1140mm 114 teeth 32 T10/1140 SKU: 16483000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1140mm-114-teeth-32-t10-1140-sku-16483000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1110mm 111 teeth 32 T10/1110 SKU: 16482900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1110mm-111-teeth-32-t10-1110-sku-16482900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1080mm 108 teeth 32 T10/1080 SKU: 16482800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1080mm-108-teeth-32-t10-1080-sku-16482800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1010mm 101 teeth 32 T10/1010 SKU: 16482700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1010mm-101-teeth-32-t10-1010-sku-16482700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 980mm 98 teeth 32 T10/980 SKU: 16482600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-980mm-98-teeth-32-t10-980-sku-16482600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 970mm 97 teeth 32 T10/970 SKU: 16482500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-970mm-97-teeth-32-t10-970-sku-16482500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 960mm 96 teeth 32 T10/960 SKU: 16482400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-960mm-96-teeth-32-t10-960-sku-16482400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 920mm 92 teeth 32 T10/920 SKU: 16482300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-920mm-92-teeth-32-t10-920-sku-16482300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 900mm 90 teeth 32 T10/900 SKU: 16482200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-900mm-90-teeth-32-t10-900-sku-16482200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 890mm 89 teeth 32 T10/890 SKU: 16482100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-890mm-89-teeth-32-t10-890-sku-16482100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 880mm 88 teeth 32 T10/880 SKU: 16482000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-880mm-88-teeth-32-t10-880-sku-16482000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 840mm 84 teeth 32 T10/840 SKU: 16481900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-840mm-84-teeth-32-t10-840-sku-16481900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 810mm 81 teeth 32 T10/810 SKU: 16481800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-810mm-81-teeth-32-t10-810-sku-16481800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 780mm 78 teeth 32 T10/780 SKU: 16481700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-780mm-78-teeth-32-t10-780-sku-16481700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 750mm 75 teeth 32 T10/750 SKU: 16481600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-750mm-75-teeth-32-t10-750-sku-16481600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 720mm 72 teeth 32 T10/720 SKU: 16481500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-720mm-72-teeth-32-t10-720-sku-16481500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 700mm 70 teeth 32 T10/700 SKU: 16481400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-700mm-70-teeth-32-t10-700-sku-16481400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 690mm 69 teeth 32 T10/690 SKU: 16481300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-690mm-69-teeth-32-t10-690-sku-16481300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 660mm 66 teeth 32 T10/660 SKU: 16481200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-660mm-66-teeth-32-t10-660-sku-16481200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 630mm 63 teeth 32 T10/630 SKU: 16481100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-630mm-63-teeth-32-t10-630-sku-16481100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 610mm 61 teeth 32 T10/610 SKU: 16481000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-610mm-61-teeth-32-t10-610-sku-16481000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 560mm 56 teeth 32 T10/560 SKU: 16480900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-560mm-56-teeth-32-t10-560-sku-16480900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 530mm 53 teeth 32 T10/530 SKU: 16480800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-530mm-53-teeth-32-t10-530-sku-16480800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 500mm 50 teeth 32 T10/500 SKU: 16480700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-500mm-50-teeth-32-t10-500-sku-16480700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 450mm 45 teeth 32 T10/450 SKU: 16480600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-450mm-45-teeth-32-t10-450-sku-16480600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 440mm 44 teeth 32 T10/440 SKU: 16480500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-440mm-44-teeth-32-t10-440-sku-16480500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 410mm 41 teeth 32 T10/410 SKU: 16480400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-410mm-41-teeth-32-t10-410-sku-16480400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 400mm 40 teeth 32 T10/400 SKU: 16480300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-400mm-40-teeth-32-t10-400-sku-16480300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 370mm 37 teeth 32 T10/370 SKU: 16480200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-370mm-37-teeth-32-t10-370-sku-16480200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 260mm 26 teeth 32 T10/260 SKU: 16480100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-260mm-26-teeth-32-t10-260-sku-16480100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm 32T10 open length PAZ = Polyamide fabric on tooth side SKU: 16480001](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-32t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16480001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 32mm 32 T10 open length with tensile members from steel packed 2 x 16mm SKU: 16480000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-32-t10-open-length-with-tensile-members-from-steel-packed-2-x-16mm-sku-16480000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T10 belt width 25mm SKU: 16479900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-25mm-sku-16479900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Timing belt pulley from steel T10 96 teeth belt width 32mm for taper bush 2517 SKU: 16477496](https://maedler.in/product/timing-belt-pulley-from-steel-t10-96-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477496/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 84 teeth belt width 32mm for taper bush 2517 SKU: 16477484](https://maedler.in/product/timing-belt-pulley-from-steel-t10-84-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477484/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 72 teeth belt width 32mm for taper bush 2517 SKU: 16477472](https://maedler.in/product/timing-belt-pulley-from-steel-t10-72-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477472/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 60 teeth belt width 32mm for taper bush 2517 SKU: 16477460](https://maedler.in/product/timing-belt-pulley-from-steel-t10-60-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477460/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 48 teeth belt width 32mm for taper bush 2517 SKU: 16477448](https://maedler.in/product/timing-belt-pulley-from-steel-t10-48-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477448/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 44 teeth belt width 32mm for taper bush 2012 SKU: 16477444](https://maedler.in/product/timing-belt-pulley-from-steel-t10-44-teeth-belt-width-32mm-for-taper-bush-2012-sku-16477444/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 40 teeth belt width 32mm for taper bush 2012 SKU: 16477440](https://maedler.in/product/timing-belt-pulley-from-steel-t10-40-teeth-belt-width-32mm-for-taper-bush-2012-sku-16477440/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 36 teeth belt width 32mm for taper bush 2012 SKU: 16477436](https://maedler.in/product/timing-belt-pulley-from-steel-t10-36-teeth-belt-width-32mm-for-taper-bush-2012-sku-16477436/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 32 teeth belt width 32mm for taper bush 1615 SKU: 16477432](https://maedler.in/product/timing-belt-pulley-from-steel-t10-32-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477432/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 30 teeth belt width 32mm for taper bush 1615 SKU: 16477430](https://maedler.in/product/timing-belt-pulley-from-steel-t10-30-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477430/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 28 teeth belt width 32mm for taper bush 1615 SKU: 16477428](https://maedler.in/product/timing-belt-pulley-from-steel-t10-28-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477428/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 27 teeth belt width 32mm for taper bush 1615 SKU: 16477427](https://maedler.in/product/timing-belt-pulley-from-steel-t10-27-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477427/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 26 teeth belt width 32mm for taper bush 1615 SKU: 16477426](https://maedler.in/product/timing-belt-pulley-from-steel-t10-26-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477426/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 25 teeth belt width 32mm for taper bush 1615 SKU: 16477425](https://maedler.in/product/timing-belt-pulley-from-steel-t10-25-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477425/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 24 teeth belt width 32mm for taper bush 1615 SKU: 16477424](https://maedler.in/product/timing-belt-pulley-from-steel-t10-24-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477424/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 22 teeth belt width 32mm for taper bush 1210 SKU: 16477422](https://maedler.in/product/timing-belt-pulley-from-steel-t10-22-teeth-belt-width-32mm-for-taper-bush-1210-sku-16477422/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 20 teeth belt width 32mm for taper bush 1108 SKU: 16477420](https://maedler.in/product/timing-belt-pulley-from-steel-t10-20-teeth-belt-width-32mm-for-taper-bush-1108-sku-16477420/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 19 teeth belt width 32mm for taper bush 1108 SKU: 16477419](https://maedler.in/product/timing-belt-pulley-from-steel-t10-19-teeth-belt-width-32mm-for-taper-bush-1108-sku-16477419/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 18 teeth belt width 32mm for taper bush 1008 SKU: 16477418](https://maedler.in/product/timing-belt-pulley-from-steel-t10-18-teeth-belt-width-32mm-for-taper-bush-1008-sku-16477418/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 96 teeth belt width 25mm for taper bush 2517 SKU: 16477396](https://maedler.in/product/timing-belt-pulley-from-steel-t10-96-teeth-belt-width-25mm-for-taper-bush-2517-sku-16477396/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 84 teeth belt width 25mm for taper bush 2517 SKU: 16477384](https://maedler.in/product/timing-belt-pulley-from-steel-t10-84-teeth-belt-width-25mm-for-taper-bush-2517-sku-16477384/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 72 teeth belt width 25mm for taper bush 2517 SKU: 16477372](https://maedler.in/product/timing-belt-pulley-from-steel-t10-72-teeth-belt-width-25mm-for-taper-bush-2517-sku-16477372/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 60 teeth belt width 25mm for taper bush 2012 SKU: 16477360](https://maedler.in/product/timing-belt-pulley-from-steel-t10-60-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477360/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 48 teeth belt width 25mm for taper bush 2012 SKU: 16477348](https://maedler.in/product/timing-belt-pulley-from-steel-t10-48-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477348/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 44 teeth belt width 25mm for taper bush 2012 SKU: 16477344](https://maedler.in/product/timing-belt-pulley-from-steel-t10-44-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477344/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 40 teeth belt width 25mm for taper bush 2012 SKU: 16477340](https://maedler.in/product/timing-belt-pulley-from-steel-t10-40-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477340/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 36 teeth belt width 25mm for taper bush 2012 SKU: 16477336](https://maedler.in/product/timing-belt-pulley-from-steel-t10-36-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477336/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 32 teeth belt width 25mm for taper bush 1610 SKU: 16477332](https://maedler.in/product/timing-belt-pulley-from-steel-t10-32-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477332/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 30 teeth belt width 25mm for taper bush 1610 SKU: 16477330](https://maedler.in/product/timing-belt-pulley-from-steel-t10-30-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477330/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 28 teeth belt width 25mm for taper bush 1610 SKU: 16477328](https://maedler.in/product/timing-belt-pulley-from-steel-t10-28-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477328/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 27 teeth belt width 25mm for taper bush 1610 SKU: 16477327](https://maedler.in/product/timing-belt-pulley-from-steel-t10-27-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477327/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 26 teeth belt width 25mm for taper bush 1610 SKU: 16477326](https://maedler.in/product/timing-belt-pulley-from-steel-t10-26-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477326/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 25 teeth belt width 25mm for taper bush 1108 SKU: 16477325](https://maedler.in/product/timing-belt-pulley-from-steel-t10-25-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477325/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 24 teeth belt width 25mm for taper bush 1108 SKU: 16477324](https://maedler.in/product/timing-belt-pulley-from-steel-t10-24-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477324/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 22 teeth belt width 25mm for taper bush 1108 SKU: 16477322](https://maedler.in/product/timing-belt-pulley-from-steel-t10-22-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477322/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 20 teeth belt width 25mm for taper bush 1108 SKU: 16477320](https://maedler.in/product/timing-belt-pulley-from-steel-t10-20-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477320/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 19 teeth belt width 25mm for taper bush 1108 SKU: 16477319](https://maedler.in/product/timing-belt-pulley-from-steel-t10-19-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477319/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 18 teeth belt width 25mm for taper bush 1008 SKU: 16477318](https://maedler.in/product/timing-belt-pulley-from-steel-t10-18-teeth-belt-width-25mm-for-taper-bush-1008-sku-16477318/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 96 teeth belt width 16mm for taper bush 2517 SKU: 16477296](https://maedler.in/product/timing-belt-pulley-from-steel-t10-96-teeth-belt-width-16mm-for-taper-bush-2517-sku-16477296/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 84 teeth belt width 16mm for taper bush 2517 SKU: 16477284](https://maedler.in/product/timing-belt-pulley-from-steel-t10-84-teeth-belt-width-16mm-for-taper-bush-2517-sku-16477284/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 72 teeth belt width 16mm for taper bush 2517 SKU: 16477272](https://maedler.in/product/timing-belt-pulley-from-steel-t10-72-teeth-belt-width-16mm-for-taper-bush-2517-sku-16477272/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 64 teeth belt width 16mm for taper bush 2517 SKU: 16477264](https://maedler.in/product/timing-belt-pulley-from-steel-t10-64-teeth-belt-width-16mm-for-taper-bush-2517-sku-16477264/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 60 teeth belt width 16mm for taper bush 2012 SKU: 16477260](https://maedler.in/product/timing-belt-pulley-from-steel-t10-60-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477260/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 56 teeth belt width 16mm for taper bush 2012 SKU: 16477256](https://maedler.in/product/timing-belt-pulley-from-steel-t10-56-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477256/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 48 teeth belt width 16mm for taper bush 2012 SKU: 16477248](https://maedler.in/product/timing-belt-pulley-from-steel-t10-48-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477248/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 44 teeth belt width 16mm for taper bush 2012 SKU: 16477244](https://maedler.in/product/timing-belt-pulley-from-steel-t10-44-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477244/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 42 teeth belt width 16mm for taper bush 2012 SKU: 16477242](https://maedler.in/product/timing-belt-pulley-from-steel-t10-42-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477242/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 40 teeth belt width 16mm for taper bush 1610 SKU: 16477240](https://maedler.in/product/timing-belt-pulley-from-steel-t10-40-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477240/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 36 teeth belt width 16mm for taper bush 1610 SKU: 16477236](https://maedler.in/product/timing-belt-pulley-from-steel-t10-36-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477236/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 32 teeth belt width 16mm for taper bush 1610 SKU: 16477232](https://maedler.in/product/timing-belt-pulley-from-steel-t10-32-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477232/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 30 teeth belt width 16mm for taper bush 1610 SKU: 16477230](https://maedler.in/product/timing-belt-pulley-from-steel-t10-30-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477230/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 28 teeth belt width 16mm for taper bush 1610 SKU: 16477228](https://maedler.in/product/timing-belt-pulley-from-steel-t10-28-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477228/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 27 teeth belt width 16mm for taper bush 1210 SKU: 16477227](https://maedler.in/product/timing-belt-pulley-from-steel-t10-27-teeth-belt-width-16mm-for-taper-bush-1210-sku-16477227/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 26 teeth belt width 16mm for taper bush 1210 SKU: 16477226](https://maedler.in/product/timing-belt-pulley-from-steel-t10-26-teeth-belt-width-16mm-for-taper-bush-1210-sku-16477226/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 25 teeth belt width 16mm for taper bush 1210 SKU: 16477225](https://maedler.in/product/timing-belt-pulley-from-steel-t10-25-teeth-belt-width-16mm-for-taper-bush-1210-sku-16477225/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 24 teeth belt width 16mm for taper bush 1210 SKU: 16477224](https://maedler.in/product/timing-belt-pulley-from-steel-t10-24-teeth-belt-width-16mm-for-taper-bush-1210-sku-16477224/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 22 teeth belt width 16mm for taper bush 1108 SKU: 16477222](https://maedler.in/product/timing-belt-pulley-from-steel-t10-22-teeth-belt-width-16mm-for-taper-bush-1108-sku-16477222/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 20 teeth belt width 16mm for taper bush 1108 SKU: 16477220](https://maedler.in/product/timing-belt-pulley-from-steel-t10-20-teeth-belt-width-16mm-for-taper-bush-1108-sku-16477220/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 19 teeth belt width 16mm for taper bush 1108 SKU: 16477219](https://maedler.in/product/timing-belt-pulley-from-steel-t10-19-teeth-belt-width-16mm-for-taper-bush-1108-sku-16477219/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 18 teeth belt width 16mm for taper bush 1008 SKU: 16477218](https://maedler.in/product/timing-belt-pulley-from-steel-t10-18-teeth-belt-width-16mm-for-taper-bush-1008-sku-16477218/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt T10 width 25mm Lw 2250mm 225 teeth 25 T10/2250 SKU: 16475100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-2250mm-225-teeth-25-t10-2250-sku-16475100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1960mm 196 teeth 25 T10/1960 SKU: 16475000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1960mm-196-teeth-25-t10-1960-sku-16475000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1880mm 188 teeth 25 T10/1880 SKU: 16474900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1880mm-188-teeth-25-t10-1880-sku-16474900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1780mm 178 teeth 25 T10/1780 SKU: 16474800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1780mm-178-teeth-25-t10-1780-sku-16474800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1750mm 175 teeth 25 T10/1750 SKU: 16474700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1750mm-175-teeth-25-t10-1750-sku-16474700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1610mm 161 teeth 25 T10/1610 SKU: 16474600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1610mm-161-teeth-25-t10-1610-sku-16474600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1560mm 156 teeth 25 T10/1560 SKU: 16474500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1560mm-156-teeth-25-t10-1560-sku-16474500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1240mm 124 teeth 50 T10/1240 SKU: 16489300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1240mm-124-teeth-50-t10-1240-sku-16489300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1210mm 121 teeth 50 T10/1210 SKU: 16489200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1210mm-121-teeth-50-t10-1210-sku-16489200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1150mm 115 teeth 50 T10/1150 SKU: 16489100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1150mm-115-teeth-50-t10-1150-sku-16489100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1140mm 114 teeth 50 T10/1140 SKU: 16489000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1140mm-114-teeth-50-t10-1140-sku-16489000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1110mm 111 teeth 50 T10/1110 SKU: 16488900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1110mm-111-teeth-50-t10-1110-sku-16488900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1080mm 108 teeth 50 T10/1080 SKU: 16488800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1080mm-108-teeth-50-t10-1080-sku-16488800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1010mm 101 teeth 50 T10/1010 SKU: 16488700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1010mm-101-teeth-50-t10-1010-sku-16488700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 980mm 98 teeth 50 T10/980 SKU: 16488600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-980mm-98-teeth-50-t10-980-sku-16488600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 960mm 96 teeth 50 T10/960 SKU: 16488400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-960mm-96-teeth-50-t10-960-sku-16488400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 920mm 92 teeth 50 T10/920 SKU: 16488300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-920mm-92-teeth-50-t10-920-sku-16488300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 900mm 90 teeth 50 T10/900 SKU: 16488200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-900mm-90-teeth-50-t10-900-sku-16488200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 890mm 89 teeth 50 T10/890 SKU: 16488100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-890mm-89-teeth-50-t10-890-sku-16488100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 880mm 88 teeth 50 T10/880 SKU: 16488000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-880mm-88-teeth-50-t10-880-sku-16488000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 840mm 84 teeth 50 T10/840 SKU: 16487900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-840mm-84-teeth-50-t10-840-sku-16487900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 810mm 81 teeth 50 T10/810 SKU: 16487800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-810mm-81-teeth-50-t10-810-sku-16487800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 780mm 78 teeth 50 T10/780 SKU: 16487700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-780mm-78-teeth-50-t10-780-sku-16487700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 750mm 75 teeth 50 T10/750 SKU: 16487600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-750mm-75-teeth-50-t10-750-sku-16487600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 720mm 72 teeth 50 T10/720 SKU: 16487500](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-720mm-72-teeth-50-t10-720-sku-16487500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 700mm 70 teeth 50 T10/700 SKU: 16487400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-700mm-70-teeth-50-t10-700-sku-16487400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 690mm 69 teeth 50 T10/690 SKU: 16487300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-690mm-69-teeth-50-t10-690-sku-16487300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 660mm 66 teeth 50 T10/660 SKU: 16487200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-660mm-66-teeth-50-t10-660-sku-16487200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 630mm 63 teeth 50 T10/630 SKU: 16487100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-630mm-63-teeth-50-t10-630-sku-16487100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 610mm 61 teeth 50 T10/610 SKU: 16487000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-610mm-61-teeth-50-t10-610-sku-16487000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 560mm 56 teeth 50 T10/560 SKU: 16486900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-560mm-56-teeth-50-t10-560-sku-16486900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 530mm 53 teeth 50 T10/530 SKU: 16486800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-530mm-53-teeth-50-t10-530-sku-16486800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 500mm 50 teeth 50 T10/500 SKU: 16486700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-500mm-50-teeth-50-t10-500-sku-16486700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 450mm 45 teeth 50 T10/450 SKU: 16486600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-450mm-45-teeth-50-t10-450-sku-16486600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 440mm 44 teeth 50 T10/440 SKU: 16486500](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-440mm-44-teeth-50-t10-440-sku-16486500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 410mm 41 teeth 50 T10/410 SKU: 16486400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-410mm-41-teeth-50-t10-410-sku-16486400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 400mm 40 teeth 50 T10/400 SKU: 16486300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-400mm-40-teeth-50-t10-400-sku-16486300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 370mm 37 teeth 50 T10/370 SKU: 16486200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-370mm-37-teeth-50-t10-370-sku-16486200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm 50T10 open length PAZ = Polyamide fabric on tooth side SKU: 16486001](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-50t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16486001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 50mm 50 T10 open length with tensile members from steel packed 2 x 25mm SKU: 16486000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-50-t10-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16486000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T10 width 40mm Lw 2250mm 225 teeth 40 T10/2250 SKU: 16485551](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-2250mm-225-teeth-40-t10-2250-sku-16485551/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1960mm 196 teeth 40 T10/1960 SKU: 16485550](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1960mm-196-teeth-40-t10-1960-sku-16485550/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1880mm 188 teeth 40 T10/1880 SKU: 16485549](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1880mm-188-teeth-40-t10-1880-sku-16485549/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1780mm 178 teeth 40 T10/1780 SKU: 16485548](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1780mm-178-teeth-40-t10-1780-sku-16485548/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1750mm 175 teeth 40 T10/1750 SKU: 16485547](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1750mm-175-teeth-40-t10-1750-sku-16485547/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1610mm 161 teeth 40 T10/1610 SKU: 16485546](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1610mm-161-teeth-40-t10-1610-sku-16485546/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1560mm 156 teeth 40 T10/1560 SKU: 16485545](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1560mm-156-teeth-40-t10-1560-sku-16485545/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1500mm 150 teeth 40 T10/1500 SKU: 16485544](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1500mm-150-teeth-40-t10-1500-sku-16485544/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1460mm 146 teeth 40 T10/1460 SKU: 16485543](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1460mm-146-teeth-40-t10-1460-sku-16485543/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1450mm 145 teeth 40 T10/1450 SKU: 16485542](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1450mm-145-teeth-40-t10-1450-sku-16485542/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1440mm 144 teeth 40 T10/1440 SKU: 16485541](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1440mm-144-teeth-40-t10-1440-sku-16485541/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1420mm 142 teeth 40 T10/1420 SKU: 16485540](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1420mm-142-teeth-40-t10-1420-sku-16485540/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1400mm 140 teeth 40 T10/1400 SKU: 16485539](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1400mm-140-teeth-40-t10-1400-sku-16485539/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1390mm 139 teeth 40 T10/1390 SKU: 16485538](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1390mm-139-teeth-40-t10-1390-sku-16485538/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1350mm 135 teeth 40 T10/1350 SKU: 16485537](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1350mm-135-teeth-40-t10-1350-sku-16485537/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1320mm 132 teeth 40 T10/1320 SKU: 16485536](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1320mm-132-teeth-40-t10-1320-sku-16485536/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1300mm 130 teeth 40 T10/1300 SKU: 16485535](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1300mm-130-teeth-40-t10-1300-sku-16485535/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1250mm 125 teeth 40 T10/1250 SKU: 16485534](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1250mm-125-teeth-40-t10-1250-sku-16485534/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1240mm 124 teeth 40 T10/1240 SKU: 16485533](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1240mm-124-teeth-40-t10-1240-sku-16485533/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1210mm 121 teeth 40 T10/1210 SKU: 16485532](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1210mm-121-teeth-40-t10-1210-sku-16485532/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1150mm 115 teeth 40 T10/1150 SKU: 16485531](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1150mm-115-teeth-40-t10-1150-sku-16485531/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1110mm 111 teeth 40 T10/1110 SKU: 16485529](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1110mm-111-teeth-40-t10-1110-sku-16485529/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1080mm 108 teeth 40 T10/1080 SKU: 16485528](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1080mm-108-teeth-40-t10-1080-sku-16485528/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1010mm 101 teeth 40 T10/1010 SKU: 16485527](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1010mm-101-teeth-40-t10-1010-sku-16485527/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 980mm 98 teeth 40 T10/980 SKU: 16485526](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-980mm-98-teeth-40-t10-980-sku-16485526/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 960mm 96 teeth 40 T10/960 SKU: 16485524](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-960mm-96-teeth-40-t10-960-sku-16485524/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 920mm 92 teeth 40 T10/920 SKU: 16485523](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-920mm-92-teeth-40-t10-920-sku-16485523/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 900mm 90 teeth 40 T10/900 SKU: 16485522](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-900mm-90-teeth-40-t10-900-sku-16485522/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 880mm 88 teeth 40 T10/880 SKU: 16485520](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-880mm-88-teeth-40-t10-880-sku-16485520/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 840mm 84 teeth 40 T10/840 SKU: 16485519](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-840mm-84-teeth-40-t10-840-sku-16485519/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 810mm 81 teeth 40 T10/810 SKU: 16485518](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-810mm-81-teeth-40-t10-810-sku-16485518/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 780mm 78 teeth 40 T10/780 SKU: 16485517](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-780mm-78-teeth-40-t10-780-sku-16485517/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 750mm 75 teeth 40 T10/750 SKU: 16485516](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-750mm-75-teeth-40-t10-750-sku-16485516/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 720mm 72 teeth 40 T10/720 SKU: 16485515](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-720mm-72-teeth-40-t10-720-sku-16485515/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 700mm 70 teeth 40 T10/700 SKU: 16485514](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-700mm-70-teeth-40-t10-700-sku-16485514/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 660mm 66 teeth 40 T10/660 SKU: 16485512](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-660mm-66-teeth-40-t10-660-sku-16485512/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 630mm 63 teeth 40 T10/630 SKU: 16485511](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-630mm-63-teeth-40-t10-630-sku-16485511/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 610mm 61 teeth 40 T10/610 SKU: 16485510](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-610mm-61-teeth-40-t10-610-sku-16485510/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 560mm 56 teeth 40 T10/560 SKU: 16485509](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-560mm-56-teeth-40-t10-560-sku-16485509/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 530mm 53 teeth 40 T10/530 SKU: 16485508](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-530mm-53-teeth-40-t10-530-sku-16485508/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 500mm 50 teeth 40 T10/500 SKU: 16485507](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-500mm-50-teeth-40-t10-500-sku-16485507/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 450mm 45 teeth 40 T10/450 SKU: 16485506](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-450mm-45-teeth-40-t10-450-sku-16485506/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 410mm 41 teeth 40 T10/410 SKU: 16485504](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-410mm-41-teeth-40-t10-410-sku-16485504/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 370mm 37 teeth 40 T10/370 SKU: 16485502](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-370mm-37-teeth-40-t10-370-sku-16485502/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm 40T10 open length PAZ = Polyamide fabric on tooth side SKU: 16485501](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-40t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16485501/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 40mm 40 T10 open length with tensile members from steel SKU: 16485500](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-40-t10-open-length-with-tensile-members-from-steel-sku-16485500/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T10 width 32mm Lw 2250mm 225 teeth 32 T10/2250 SKU: 16485100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-2250mm-225-teeth-32-t10-2250-sku-16485100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1960mm 196 teeth 32 T10/1960 SKU: 16485000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1960mm-196-teeth-32-t10-1960-sku-16485000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1880mm 188 teeth 32 T10/1880 SKU: 16484900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1880mm-188-teeth-32-t10-1880-sku-16484900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1780mm 178 teeth 32 T10/1780 SKU: 16484800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1780mm-178-teeth-32-t10-1780-sku-16484800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1750mm 175 teeth 32 T10/1750 SKU: 16484700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1750mm-175-teeth-32-t10-1750-sku-16484700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1610mm 161 teeth 32 T10/1610 SKU: 16484600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1610mm-161-teeth-32-t10-1610-sku-16484600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1560mm 156 teeth 32 T10/1560 SKU: 16484500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1560mm-156-teeth-32-t10-1560-sku-16484500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1500mm 150 teeth 32 T10/1500 SKU: 16484400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1500mm-150-teeth-32-t10-1500-sku-16484400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1460mm 146 teeth 32 T10/1460 SKU: 16484300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1460mm-146-teeth-32-t10-1460-sku-16484300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1450mm 145 teeth 32 T10/1450 SKU: 16484200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1450mm-145-teeth-32-t10-1450-sku-16484200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1440mm 144 teeth 32 T10/1440 SKU: 16484100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1440mm-144-teeth-32-t10-1440-sku-16484100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1420mm 142 teeth 32 T10/1420 SKU: 16484000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1420mm-142-teeth-32-t10-1420-sku-16484000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1400mm 140 teeth 32 T10/1400 SKU: 16483900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1400mm-140-teeth-32-t10-1400-sku-16483900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1390mm 139 teeth 32 T10/1390 SKU: 16483800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1390mm-139-teeth-32-t10-1390-sku-16483800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1350mm 135 teeth 32 T10/1350 SKU: 16483700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1350mm-135-teeth-32-t10-1350-sku-16483700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1320mm 132 teeth 32 T10/1320 SKU: 16483600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1320mm-132-teeth-32-t10-1320-sku-16483600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1300mm 130 teeth 32 T10/1300 SKU: 16483500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1300mm-130-teeth-32-t10-1300-sku-16483500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1250mm 125 teeth 32 T10/1250 SKU: 16483400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1250mm-125-teeth-32-t10-1250-sku-16483400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1240mm 124 teeth 32 T10/1240 SKU: 16483300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1240mm-124-teeth-32-t10-1240-sku-16483300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1210mm 121 teeth 32 T10/1210 SKU: 16483200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1210mm-121-teeth-32-t10-1210-sku-16483200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1150mm 115 teeth 32 T10/1150 SKU: 16483100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1150mm-115-teeth-32-t10-1150-sku-16483100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Timing belt pulley AT5 material aluminium 17 teeth for belt width 16 mm 27 AT5/17-2 SKU: 16631700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-17-teeth-for-belt-width-16-mm-27-at5-17-2-sku-16631700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 16 teeth for belt width 16mm 27 AT5/16-2 SKU: 16631600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-16-teeth-for-belt-width-16mm-27-at5-16-2-sku-16631600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 15 teeth for belt width 16mm 27 AT5/15-2 SKU: 16631500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-15-teeth-for-belt-width-16mm-27-at5-15-2-sku-16631500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 14 teeth for belt width 16mm 27 AT5/14-2 SKU: 16631400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-14-teeth-for-belt-width-16mm-27-at5-14-2-sku-16631400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 12 teeth for belt width 16mm 27 AT5/12-2 SKU: 16631200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-12-teeth-for-belt-width-16mm-27-at5-12-2-sku-16631200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 96 teeth for belt width 10 mm 21 AT5/96-0 SKU: 16629600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-96-teeth-for-belt-width-10-mm-21-at5-96-0-sku-16629600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 84 teeth for belt width 10 mm 21 AT5/84-0 SKU: 16628400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-84-teeth-for-belt-width-10-mm-21-at5-84-0-sku-16628400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 72 teeth for belt width 10 mm 21 AT5/72-0 SKU: 16627200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-72-teeth-for-belt-width-10-mm-21-at5-72-0-sku-16627200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 60 teeth for belt width 10mm 21 AT5/60-0 SKU: 16626000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-60-teeth-for-belt-width-10mm-21-at5-60-0-sku-16626000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 48 teeth for belt width 10mm 21 AT5/48-0 SKU: 16624800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-48-teeth-for-belt-width-10mm-21-at5-48-0-sku-16624800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 44 teeth for belt width 10mm 21 AT5/44-0 SKU: 16624400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-44-teeth-for-belt-width-10mm-21-at5-44-0-sku-16624400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 42 teeth for belt width 10mm 21 AT5/42-2 SKU: 16624200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-42-teeth-for-belt-width-10mm-21-at5-42-2-sku-16624200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 40 teeth for belt width 10mm 21 AT5/40-2 SKU: 16624000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-40-teeth-for-belt-width-10mm-21-at5-40-2-sku-16624000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 36 teeth for belt width 10mm 21 AT5/36-2 SKU: 16623600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-36-teeth-for-belt-width-10mm-21-at5-36-2-sku-16623600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 32 teeth for belt width 10mm 21 AT5/32-2 SKU: 16623200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-32-teeth-for-belt-width-10mm-21-at5-32-2-sku-16623200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 30 teeth for belt width 10mm 21 AT5/30-2 SKU: 16623000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-30-teeth-for-belt-width-10mm-21-at5-30-2-sku-16623000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 28 teeth for belt width 10mm 21 AT5/28-2 SKU: 16622800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-28-teeth-for-belt-width-10mm-21-at5-28-2-sku-16622800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 27 teeth for belt width 10mm 21 AT5/27-2 SKU: 16622700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-27-teeth-for-belt-width-10mm-21-at5-27-2-sku-16622700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 26 teeth for belt width 10mm 21 AT5/26-2 SKU: 16622600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-26-teeth-for-belt-width-10mm-21-at5-26-2-sku-16622600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 25 teeth for belt width 10mm 21 AT5/25-2 SKU: 16622500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-25-teeth-for-belt-width-10mm-21-at5-25-2-sku-16622500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 24 teeth for belt width 10mm 21 AT5/24-2 SKU: 16622400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-24-teeth-for-belt-width-10mm-21-at5-24-2-sku-16622400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 22 teeth for belt width 10mm 21 AT5/22-2 SKU: 16622200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-22-teeth-for-belt-width-10mm-21-at5-22-2-sku-16622200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 20 teeth for belt width 10mm 21 AT5/20-2 SKU: 16622000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-20-teeth-for-belt-width-10mm-21-at5-20-2-sku-16622000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 19 teeth for belt width 10mm 21 AT5/19-2 SKU: 16621900](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-19-teeth-for-belt-width-10mm-21-at5-19-2-sku-16621900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 18 teeth for belt width 10mm 21 AT5/18-2 SKU: 16621800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-18-teeth-for-belt-width-10mm-21-at5-18-2-sku-16621800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 17 teeth for belt width 10 mm 21 AT5/17-2 SKU: 16621700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-17-teeth-for-belt-width-10-mm-21-at5-17-2-sku-16621700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 16 teeth for belt width 10mm 21 AT5/16-2 SKU: 16621600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-16-teeth-for-belt-width-10mm-21-at5-16-2-sku-16621600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 15 teeth for belt width 10mm 21 AT5/15-2 SKU: 16621500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-15-teeth-for-belt-width-10mm-21-at5-15-2-sku-16621500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 14 teeth for belt width 10mm 21 AT5/14-2 SKU: 16621400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-14-teeth-for-belt-width-10mm-21-at5-14-2-sku-16621400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 12 teeth for belt width 10mm 21 AT5/12-2 SKU: 16621200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-12-teeth-for-belt-width-10mm-21-at5-12-2-sku-16621200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Polyurethane timing belt T20 width 100mm 100 T20 open length with tensile members from steel packed 4 x 25mm SKU: 16580000](https://maedler.in/product/polyurethane-timing-belt-t20-width-100mm-100-t20-open-length-with-tensile-members-from-steel-packed-4-x-25mm-sku-16580000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T20 width 75mm 75 T20 open length with tensile members from steel packed 3 x 25mm SKU: 16570000](https://maedler.in/product/polyurethane-timing-belt-t20-width-75mm-75-t20-open-length-with-tensile-members-from-steel-packed-3-x-25mm-sku-16570000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T20 width 50mm 50 T20 open length with tensile members from steel packed 2 x 25mm SKU: 16560000](https://maedler.in/product/polyurethane-timing-belt-t20-width-50mm-50-t20-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16560000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [timing bar T10 40 teeth length 160mm material 1.4305 SKU: 16499940](https://maedler.in/product/timing-bar-t10-40-teeth-length-160mm-material-1-4305-sku-16499940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 36 teeth length 160mm material 1.4305 SKU: 16499936](https://maedler.in/product/timing-bar-t10-36-teeth-length-160mm-material-1-4305-sku-16499936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 32 teeth length 160mm material 1.4305 SKU: 16499932](https://maedler.in/product/timing-bar-t10-32-teeth-length-160mm-material-1-4305-sku-16499932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 30 teeth length 160mm material 1.4305 SKU: 16499930](https://maedler.in/product/timing-bar-t10-30-teeth-length-160mm-material-1-4305-sku-16499930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 25 teeth length 160mm material 1.4305 SKU: 16499925](https://maedler.in/product/timing-bar-t10-25-teeth-length-160mm-material-1-4305-sku-16499925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 24 teeth length 160mm material 1.4305 SKU: 16499924](https://maedler.in/product/timing-bar-t10-24-teeth-length-160mm-material-1-4305-sku-16499924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 20 teeth length 160mm material 1.4305 SKU: 16499920](https://maedler.in/product/timing-bar-t10-20-teeth-length-160mm-material-1-4305-sku-16499920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 18 teeth length 160mm material 1.4305 SKU: 16499918](https://maedler.in/product/timing-bar-t10-18-teeth-length-160mm-material-1-4305-sku-16499918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 16 teeth length 160mm material 1.4305 SKU: 16499916](https://maedler.in/product/timing-bar-t10-16-teeth-length-160mm-material-1-4305-sku-16499916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 15 teeth length 160mm material 1.4305 SKU: 16499915](https://maedler.in/product/timing-bar-t10-15-teeth-length-160mm-material-1-4305-sku-16499915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 12 teeth length 140mm material 1.4305 SKU: 16499912](https://maedler.in/product/timing-bar-t10-12-teeth-length-140mm-material-1-4305-sku-16499912/): Material: Stainless steel 1.4305 (AISI 303). - [Fixing plate for timing belts material aluminium T10 belt width 100mm SKU: 16499901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-100mm-sku-16499901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium T10 belt width 50mm SKU: 16499900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-50mm-sku-16499900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T10 width 50mm Lw 2250mm 225 teeth 50 T10/2250 SKU: 16499100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-2250mm-225-teeth-50-t10-2250-sku-16499100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1960mm 196 teeth 50 T10/1960 SKU: 16499000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1960mm-196-teeth-50-t10-1960-sku-16499000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1880mm 188 teeth 50 T10/1880 SKU: 16498900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1880mm-188-teeth-50-t10-1880-sku-16498900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1780mm 178 teeth 50 T10/1780 SKU: 16498800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1780mm-178-teeth-50-t10-1780-sku-16498800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1750mm 175 teeth 50 T10/1750 SKU: 16498700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1750mm-175-teeth-50-t10-1750-sku-16498700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1610mm 161 teeth 50 T10/1610 SKU: 16498600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1610mm-161-teeth-50-t10-1610-sku-16498600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1560mm 156 teeth 50 T10/1560 SKU: 16498500](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1560mm-156-teeth-50-t10-1560-sku-16498500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1500mm 150 teeth 50 T10/1500 SKU: 16498400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1500mm-150-teeth-50-t10-1500-sku-16498400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1460mm 146 teeth 50 T10/1460 SKU: 16498300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1460mm-146-teeth-50-t10-1460-sku-16498300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1450mm 145 teeth 50 T10/1450 SKU: 16498200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1450mm-145-teeth-50-t10-1450-sku-16498200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1440mm 144 teeth 50 T10/1440 SKU: 16498100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1440mm-144-teeth-50-t10-1440-sku-16498100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1420mm 142 teeth 50 T10/1420 SKU: 16498000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1420mm-142-teeth-50-t10-1420-sku-16498000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1400mm 140 teeth 50 T10/1400 SKU: 16497900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1400mm-140-teeth-50-t10-1400-sku-16497900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [timing bar T10 72 teeth length 160mm material aluminium SKU: 16497200](https://maedler.in/product/timing-bar-t10-72-teeth-length-160mm-material-aluminium-sku-16497200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 60 teeth length 160mm material aluminium SKU: 16496000](https://maedler.in/product/timing-bar-t10-60-teeth-length-160mm-material-aluminium-sku-16496000/): Material: Aluminium similar EN AW2017A. - [timing bar T10 48 teeth length 160mm material aluminium SKU: 16494800](https://maedler.in/product/timing-bar-t10-48-teeth-length-160mm-material-aluminium-sku-16494800/): Material: Aluminium similar EN AW2017A. - [timing bar T10 45 teeth length 160mm material aluminium SKU: 16494500](https://maedler.in/product/timing-bar-t10-45-teeth-length-160mm-material-aluminium-sku-16494500/): Material: Aluminium similar EN AW2017A. - [timing bar T10 44 teeth length 160mm material aluminium SKU: 16494400](https://maedler.in/product/timing-bar-t10-44-teeth-length-160mm-material-aluminium-sku-16494400/): Material: Aluminium similar EN AW2017A. - [timing bar T10 42 teeth length 160mm material aluminium SKU: 16494200](https://maedler.in/product/timing-bar-t10-42-teeth-length-160mm-material-aluminium-sku-16494200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 40 teeth length 160mm material aluminium SKU: 16494000](https://maedler.in/product/timing-bar-t10-40-teeth-length-160mm-material-aluminium-sku-16494000/): Material: Aluminium similar EN AW2017A. - [timing bar T10 38 teeth length 160mm material aluminium SKU: 16493800](https://maedler.in/product/timing-bar-t10-38-teeth-length-160mm-material-aluminium-sku-16493800/): Material: Aluminium similar EN AW2017A. - [timing bar T10 36 teeth length 160mm material aluminium SKU: 16493600](https://maedler.in/product/timing-bar-t10-36-teeth-length-160mm-material-aluminium-sku-16493600/): Material: Aluminium similar EN AW2017A. - [timing bar T10 34 teeth length 160mm material aluminium SKU: 16493400](https://maedler.in/product/timing-bar-t10-34-teeth-length-160mm-material-aluminium-sku-16493400/): Material: Aluminium similar EN AW2017A. - [timing bar T10 32 teeth length 160mm material aluminium SKU: 16493200](https://maedler.in/product/timing-bar-t10-32-teeth-length-160mm-material-aluminium-sku-16493200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 30 teeth length 160mm material aluminium SKU: 16493000](https://maedler.in/product/timing-bar-t10-30-teeth-length-160mm-material-aluminium-sku-16493000/): Material: Aluminium similar EN AW2017A. - [timing bar T10 29 teeth length 160mm material aluminium SKU: 16492900](https://maedler.in/product/timing-bar-t10-29-teeth-length-160mm-material-aluminium-sku-16492900/): Material: Aluminium similar EN AW2017A. - [timing bar T10 28 teeth length 160mm material aluminium SKU: 16492800](https://maedler.in/product/timing-bar-t10-28-teeth-length-160mm-material-aluminium-sku-16492800/): Material: Aluminium similar EN AW2017A. - [timing bar T10 27 teeth length 160mm material aluminium SKU: 16492700](https://maedler.in/product/timing-bar-t10-27-teeth-length-160mm-material-aluminium-sku-16492700/): Material: Aluminium similar EN AW2017A. - [timing bar T10 26 teeth length 160mm material aluminium SKU: 16492600](https://maedler.in/product/timing-bar-t10-26-teeth-length-160mm-material-aluminium-sku-16492600/): Material: Aluminium similar EN AW2017A. - [timing bar T10 25 teeth length 160mm material aluminium SKU: 16492500](https://maedler.in/product/timing-bar-t10-25-teeth-length-160mm-material-aluminium-sku-16492500/): Material: Aluminium similar EN AW2017A. - [timing bar T10 24 teeth length 160mm material aluminium SKU: 16492400](https://maedler.in/product/timing-bar-t10-24-teeth-length-160mm-material-aluminium-sku-16492400/): Material: Aluminium similar EN AW2017A. - [timing bar T10 23 teeth length 160mm material aluminium SKU: 16492300](https://maedler.in/product/timing-bar-t10-23-teeth-length-160mm-material-aluminium-sku-16492300/): Material: Aluminium similar EN AW2017A. - [timing bar T10 22 teeth length 160mm material aluminium SKU: 16492200](https://maedler.in/product/timing-bar-t10-22-teeth-length-160mm-material-aluminium-sku-16492200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 21 teeth length 160mm material aluminium SKU: 16492100](https://maedler.in/product/timing-bar-t10-21-teeth-length-160mm-material-aluminium-sku-16492100/): Material: Aluminium similar EN AW2017A. - [timing bar T10 20 teeth length 160mm material aluminium SKU: 16492000](https://maedler.in/product/timing-bar-t10-20-teeth-length-160mm-material-aluminium-sku-16492000/): Material: Aluminium similar EN AW2017A. - [timing bar T10 19 teeth length 160mm material aluminium SKU: 16491900](https://maedler.in/product/timing-bar-t10-19-teeth-length-160mm-material-aluminium-sku-16491900/): Material: Aluminium similar EN AW2017A. - [timing bar T10 18 teeth length 160mm material aluminium SKU: 16491800](https://maedler.in/product/timing-bar-t10-18-teeth-length-160mm-material-aluminium-sku-16491800/): Material: Aluminium similar EN AW2017A. - [timing bar T10 17 teeth length 160mm material aluminium SKU: 16491700](https://maedler.in/product/timing-bar-t10-17-teeth-length-160mm-material-aluminium-sku-16491700/): Material: Aluminium similar EN AW2017A. - [timing bar T10 16 teeth length 160mm material aluminium SKU: 16491600](https://maedler.in/product/timing-bar-t10-16-teeth-length-160mm-material-aluminium-sku-16491600/): Material: Aluminium similar EN AW2017A. - [timing bar T10 15 teeth length 160mm material aluminium SKU: 16491500](https://maedler.in/product/timing-bar-t10-15-teeth-length-160mm-material-aluminium-sku-16491500/): Material: Aluminium similar EN AW2017A. - [timing bar T10 14 teeth length 160mm material aluminium SKU: 16491400](https://maedler.in/product/timing-bar-t10-14-teeth-length-160mm-material-aluminium-sku-16491400/): Material: Aluminium similar EN AW2017A. - [timing bar T10 13 teeth length 140mm material aluminium SKU: 16491300](https://maedler.in/product/timing-bar-t10-13-teeth-length-140mm-material-aluminium-sku-16491300/): Material: Aluminium similar EN AW2017A. - [timing bar T10 12 teeth length 140mm material aluminium SKU: 16491200](https://maedler.in/product/timing-bar-t10-12-teeth-length-140mm-material-aluminium-sku-16491200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 11 teeth length 140mm material aluminium SKU: 16491100](https://maedler.in/product/timing-bar-t10-11-teeth-length-140mm-material-aluminium-sku-16491100/): Material: Aluminium similar EN AW2017A. - [timing bar T10 10 teeth length 140mm material aluminium SKU: 16491000](https://maedler.in/product/timing-bar-t10-10-teeth-length-140mm-material-aluminium-sku-16491000/): Material: Aluminium similar EN AW2017A. - [Polyurethane timing belt T10 width 100mm 100T10 open length PAZ = Polyamide fabric on tooth side SKU: 16490001](https://maedler.in/product/polyurethane-timing-belt-t10-width-100mm-100t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16490001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 100mm 100 T10 open length with tensile members from steel packed 4 x 25mm SKU: 16490000](https://maedler.in/product/polyurethane-timing-belt-t10-width-100mm-100-t10-open-length-with-tensile-members-from-steel-packed-4-x-25mm-sku-16490000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T10 belt width 40mm SKU: 16489901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-40mm-sku-16489901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium T10 belt width 32mm SKU: 16489900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-32mm-sku-16489900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T10 width 50mm Lw 1390mm 139 teeth 50 T10/1390 SKU: 16489800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1390mm-139-teeth-50-t10-1390-sku-16489800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1350mm 135 teeth 50 T10/1350 SKU: 16489700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1350mm-135-teeth-50-t10-1350-sku-16489700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1320mm 132 teeth 50 T10/1320 SKU: 16489600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1320mm-132-teeth-50-t10-1320-sku-16489600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1300mm 130 teeth 50 T10/1300 SKU: 16489500](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1300mm-130-teeth-50-t10-1300-sku-16489500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1250mm 125 teeth 50 T10/1250 SKU: 16489400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1250mm-125-teeth-50-t10-1250-sku-16489400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 275mm 55 teeth 16 AT5/275 SKU: 16670300](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-275mm-55-teeth-16-at5-275-sku-16670300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 255mm 51 teeth 16 AT5/255 SKU: 16670200](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-255mm-51-teeth-16-at5-255-sku-16670200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 225mm 45 teeth 16 AT5/225 SKU: 16670100](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-225mm-45-teeth-16-at5-225-sku-16670100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm 16AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16670001](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-16at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16670001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 16mm 16AT5 open length SKU: 16670000](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-16at5-open-length-sku-16670000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT5 belt width 10mm SKU: 16669900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-10mm-sku-16669900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt AT5 width 10mm Lw 1500mm 300 teeth 10 AT5/1500 SKU: 16662400](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-1500mm-300-teeth-10-at5-1500-sku-16662400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 1125mm 225 teeth 10 AT5/1125 SKU: 16662300](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-1125mm-225-teeth-10-at5-1125-sku-16662300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 1050mm 210 teeth 10 AT5/1050 SKU: 16662200](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-1050mm-210-teeth-10-at5-1050-sku-16662200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 975mm 195 teeth 10 AT5/975 SKU: 16662100](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-975mm-195-teeth-10-at5-975-sku-16662100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 825mm 165 teeth 10 AT5/825 SKU: 16662000](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-825mm-165-teeth-10-at5-825-sku-16662000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 780mm 156 teeth 10 AT5/780 SKU: 16661900](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-780mm-156-teeth-10-at5-780-sku-16661900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 750mm 150 teeth 10 AT5/750 SKU: 16661800](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-750mm-150-teeth-10-at5-750-sku-16661800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 720mm 144 teeth 10 AT5/720 SKU: 16661700](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-720mm-144-teeth-10-at5-720-sku-16661700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 660mm 132 teeth 10 AT5/660 SKU: 16661600](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-660mm-132-teeth-10-at5-660-sku-16661600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 630mm 126 teeth 10 AT5/630 SKU: 16661500](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-630mm-126-teeth-10-at5-630-sku-16661500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 610mm 122 teeth 10 AT5/610 SKU: 16661400](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-610mm-122-teeth-10-at5-610-sku-16661400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 600mm 120 teeth 10 AT5/600 SKU: 16661300](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-600mm-120-teeth-10-at5-600-sku-16661300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 545mm 109 teeth 10 AT5/545 SKU: 16661200](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-545mm-109-teeth-10-at5-545-sku-16661200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 500mm 100 teeth 10 AT5/500 SKU: 16661100](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-500mm-100-teeth-10-at5-500-sku-16661100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 455mm 91 teeth 10 AT5/455 SKU: 16661000](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-455mm-91-teeth-10-at5-455-sku-16661000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 420mm 84 teeth 10 AT5/420 SKU: 16660900](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-420mm-84-teeth-10-at5-420-sku-16660900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 390mm 78 teeth 10 AT5/390 SKU: 16660800](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-390mm-78-teeth-10-at5-390-sku-16660800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 375mm 75 teeth 10 AT5/375 SKU: 16660700](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-375mm-75-teeth-10-at5-375-sku-16660700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 340mm 68 teeth 10 AT5/340 SKU: 16660600](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-340mm-68-teeth-10-at5-340-sku-16660600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 300mm 60 teeth 10 AT5/300 SKU: 16660500](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-300mm-60-teeth-10-at5-300-sku-16660500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 280mm 56 teeth 10 AT5/280 SKU: 16660400](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-280mm-56-teeth-10-at5-280-sku-16660400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 275mm 55 teeth 10 AT5/275 SKU: 16660300](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-275mm-55-teeth-10-at5-275-sku-16660300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 255mm 51 teeth 10 AT5/255 SKU: 16660200](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-255mm-51-teeth-10-at5-255-sku-16660200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 225mm 45 teeth 10 AT5/225 SKU: 16660100](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-225mm-45-teeth-10-at5-225-sku-16660100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm 10AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16660001](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-10at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16660001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 10mm 10 AT5 open length SKU: 16660000](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-10-at5-open-length-sku-16660000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Timing belt pulley AT5 material aluminium 72 teeth for belt width 32 mm 46 AT5/72-0 SKU: 16657200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-72-teeth-for-belt-width-32-mm-46-at5-72-0-sku-16657200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 60 teeth for belt width 32mm 46 AT5/60-0 SKU: 16656000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-60-teeth-for-belt-width-32mm-46-at5-60-0-sku-16656000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 48 teeth for belt width 32mm 46 AT5/48-0 SKU: 16654800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-48-teeth-for-belt-width-32mm-46-at5-48-0-sku-16654800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 44 teeth for belt width 32mm 46 AT5/44-0 SKU: 16654400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-44-teeth-for-belt-width-32mm-46-at5-44-0-sku-16654400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 42 teeth for belt width 32mm 46 AT5/42-2 SKU: 16654200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-42-teeth-for-belt-width-32mm-46-at5-42-2-sku-16654200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 40 teeth for belt width 32mm 46 AT5/40-2 SKU: 16654000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-40-teeth-for-belt-width-32mm-46-at5-40-2-sku-16654000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 36 teeth for belt width 32mm 46 AT5/36-2 SKU: 16653600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-36-teeth-for-belt-width-32mm-46-at5-36-2-sku-16653600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 32 teeth for belt width 32mm 46 AT5/32-2 SKU: 16653200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-32-teeth-for-belt-width-32mm-46-at5-32-2-sku-16653200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 30 teeth for belt width 32mm 46 AT5/30-2 SKU: 16653000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-30-teeth-for-belt-width-32mm-46-at5-30-2-sku-16653000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 28 teeth for belt width 32mm 46 AT5/28-2 SKU: 16652800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-28-teeth-for-belt-width-32mm-46-at5-28-2-sku-16652800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 27 teeth for belt width 32mm 46 AT5/27-2 SKU: 16652700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-27-teeth-for-belt-width-32mm-46-at5-27-2-sku-16652700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 26 teeth for belt width 32mm 46 AT5/26-2 SKU: 16652600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-26-teeth-for-belt-width-32mm-46-at5-26-2-sku-16652600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 25 teeth for belt width 32mm 46 AT5/25-2 SKU: 16652500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-25-teeth-for-belt-width-32mm-46-at5-25-2-sku-16652500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 24 teeth for belt width 32mm 46 AT5/24-2 SKU: 16652400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-24-teeth-for-belt-width-32mm-46-at5-24-2-sku-16652400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 22 teeth for belt width 32mm 46 AT5/22-2 SKU: 16652200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-22-teeth-for-belt-width-32mm-46-at5-22-2-sku-16652200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 20 teeth for belt width 32mm 46 AT5/20-2 SKU: 16652000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-20-teeth-for-belt-width-32mm-46-at5-20-2-sku-16652000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 19 teeth for belt width 32mm 46 AT5/19-2 SKU: 16651900](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-19-teeth-for-belt-width-32mm-46-at5-19-2-sku-16651900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 18 teeth for belt width 32mm 46 AT5/18-2 SKU: 16651800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-18-teeth-for-belt-width-32mm-46-at5-18-2-sku-16651800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 17 teeth for belt width 32 mm 46 AT5/17-2 SKU: 16651700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-17-teeth-for-belt-width-32-mm-46-at5-17-2-sku-16651700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 16 teeth for belt width 32mm 46 AT5/16-2 SKU: 16651600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-16-teeth-for-belt-width-32mm-46-at5-16-2-sku-16651600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 15 teeth for belt width 32mm 46 AT5/15-2 SKU: 16651500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-15-teeth-for-belt-width-32mm-46-at5-15-2-sku-16651500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 14 teeth for belt width 32mm 46 AT5/14-2 SKU: 16651400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-14-teeth-for-belt-width-32mm-46-at5-14-2-sku-16651400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 12 teeth for belt width 32mm 46 AT5/12-2 SKU: 16651200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-12-teeth-for-belt-width-32mm-46-at5-12-2-sku-16651200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 96 teeth for belt width 25 mm 36 AT5/96-0 SKU: 16649600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-96-teeth-for-belt-width-25-mm-36-at5-96-0-sku-16649600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 84 teeth for belt width 25 mm 36 AT5/84-0 SKU: 16648400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-84-teeth-for-belt-width-25-mm-36-at5-84-0-sku-16648400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 72 teeth for belt width 25 mm 36 AT5/72-0 SKU: 16647200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-72-teeth-for-belt-width-25-mm-36-at5-72-0-sku-16647200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 60 teeth for belt width 25mm 36 AT5/60-0 SKU: 16646000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-60-teeth-for-belt-width-25mm-36-at5-60-0-sku-16646000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 48 teeth for belt width 25mm 36 AT5/48-0 SKU: 16644800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-48-teeth-for-belt-width-25mm-36-at5-48-0-sku-16644800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 44 teeth for belt width 25mm 36 AT5/44-0 SKU: 16644400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-44-teeth-for-belt-width-25mm-36-at5-44-0-sku-16644400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 42 teeth for belt width 25mm 36 AT5/42-2 SKU: 16644200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-42-teeth-for-belt-width-25mm-36-at5-42-2-sku-16644200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 40 teeth for belt width 25mm 36 AT5/40-2 SKU: 16644000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-40-teeth-for-belt-width-25mm-36-at5-40-2-sku-16644000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 36 teeth for belt width 25mm 36 AT5/36-2 SKU: 16643600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-36-teeth-for-belt-width-25mm-36-at5-36-2-sku-16643600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 32 teeth for belt width 25mm 36 AT5/32-2 SKU: 16643200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-32-teeth-for-belt-width-25mm-36-at5-32-2-sku-16643200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 30 teeth for belt width 25mm 36 AT5/30-2 SKU: 16643000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-30-teeth-for-belt-width-25mm-36-at5-30-2-sku-16643000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 28 teeth for belt width 25mm 36 AT5/28-2 SKU: 16642800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-28-teeth-for-belt-width-25mm-36-at5-28-2-sku-16642800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 27 teeth for belt width 25mm 36 AT5/27-2 SKU: 16642700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-27-teeth-for-belt-width-25mm-36-at5-27-2-sku-16642700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 26 teeth for belt width 25mm 36 AT5/26-2 SKU: 16642600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-26-teeth-for-belt-width-25mm-36-at5-26-2-sku-16642600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 25 teeth for belt width 25mm 36 AT5/25-2 SKU: 16642500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-25-teeth-for-belt-width-25mm-36-at5-25-2-sku-16642500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 24 teeth for belt width 25mm 36 AT5/24-2 SKU: 16642400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-24-teeth-for-belt-width-25mm-36-at5-24-2-sku-16642400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 22 teeth for belt width 25mm 36 AT5/22-2 SKU: 16642200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-22-teeth-for-belt-width-25mm-36-at5-22-2-sku-16642200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 20 teeth for belt width 25mm 36 AT5/20-2 SKU: 16642000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-20-teeth-for-belt-width-25mm-36-at5-20-2-sku-16642000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 19 teeth for belt width 25mm 36 AT5/19-2 SKU: 16641900](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-19-teeth-for-belt-width-25mm-36-at5-19-2-sku-16641900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 18 teeth for belt width 25mm 36 AT5/18-2 SKU: 16641800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-18-teeth-for-belt-width-25mm-36-at5-18-2-sku-16641800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 17 teeth for belt width 25 mm 36 AT5/17-2 SKU: 16641700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-17-teeth-for-belt-width-25-mm-36-at5-17-2-sku-16641700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 16 teeth for belt width 25mm 36 AT5/16-2 SKU: 16641600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-16-teeth-for-belt-width-25mm-36-at5-16-2-sku-16641600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 15 teeth for belt width 25mm 36 AT5/15-2 SKU: 16641500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-15-teeth-for-belt-width-25mm-36-at5-15-2-sku-16641500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 14 teeth for belt width 25mm 36 AT5/14-2 SKU: 16641400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-14-teeth-for-belt-width-25mm-36-at5-14-2-sku-16641400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 12 teeth for belt width 25mm 36 AT5/12-2 SKU: 16641200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-12-teeth-for-belt-width-25mm-36-at5-12-2-sku-16641200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 96 teeth for belt width 16 mm 27 AT5/96-0 SKU: 16639600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-96-teeth-for-belt-width-16-mm-27-at5-96-0-sku-16639600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 84 teeth for belt width 16 mm 27 AT5/84-0 SKU: 16638400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-84-teeth-for-belt-width-16-mm-27-at5-84-0-sku-16638400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 72 teeth for belt width 16 mm 27 AT5/72-0 SKU: 16637200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-72-teeth-for-belt-width-16-mm-27-at5-72-0-sku-16637200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 60 teeth for belt width 16mm 27 AT5/60-0 SKU: 16636000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-60-teeth-for-belt-width-16mm-27-at5-60-0-sku-16636000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 48 teeth for belt width 16mm 27 AT5/48-0 SKU: 16634800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-48-teeth-for-belt-width-16mm-27-at5-48-0-sku-16634800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 44 teeth for belt width 16mm 27 AT5/44-0 SKU: 16634400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-44-teeth-for-belt-width-16mm-27-at5-44-0-sku-16634400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 42 teeth for belt width 16mm 27 AT5/42-2 SKU: 16634200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-42-teeth-for-belt-width-16mm-27-at5-42-2-sku-16634200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 40 teeth for belt width 16mm 27 AT5/40-2 SKU: 16634000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-40-teeth-for-belt-width-16mm-27-at5-40-2-sku-16634000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 36 teeth for belt width 16mm 27 AT5/36-2 SKU: 16633600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-36-teeth-for-belt-width-16mm-27-at5-36-2-sku-16633600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 32 teeth for belt width 16mm 27 AT5/32-2 SKU: 16633200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-32-teeth-for-belt-width-16mm-27-at5-32-2-sku-16633200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 30 teeth for belt width 16mm 27 AT5/30-2 SKU: 16633000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-30-teeth-for-belt-width-16mm-27-at5-30-2-sku-16633000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 28 teeth for belt width 16mm 27 AT5/28-2 SKU: 16632800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-28-teeth-for-belt-width-16mm-27-at5-28-2-sku-16632800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 27 teeth for belt width 16mm 27 AT5/27-2 SKU: 16632700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-27-teeth-for-belt-width-16mm-27-at5-27-2-sku-16632700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 26 teeth for belt width 16mm 27 AT5/26-2 SKU: 16632600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-26-teeth-for-belt-width-16mm-27-at5-26-2-sku-16632600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 25 teeth for belt width 16mm 27 AT5/25-2 SKU: 16632500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-25-teeth-for-belt-width-16mm-27-at5-25-2-sku-16632500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 24 teeth for belt width 16mm 27 AT5/24-2 SKU: 16632400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-24-teeth-for-belt-width-16mm-27-at5-24-2-sku-16632400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 22 teeth for belt width 16mm 27 AT5/22-2 SKU: 16632200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-22-teeth-for-belt-width-16mm-27-at5-22-2-sku-16632200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 20 teeth for belt width 16mm 27 AT5/20-2 SKU: 16632000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-20-teeth-for-belt-width-16mm-27-at5-20-2-sku-16632000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 19 teeth for belt width 16mm 27 AT5/19-2 SKU: 16631900](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-19-teeth-for-belt-width-16mm-27-at5-19-2-sku-16631900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 18 teeth for belt width 16mm 27 AT5/18-2 SKU: 16631800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-18-teeth-for-belt-width-16mm-27-at5-18-2-sku-16631800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Polyurethane timing belt AT5 width 32mm Lw 1125mm 225 teeth 32 AT5/1125 SKU: 16687023](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-1125mm-225-teeth-32-at5-1125-sku-16687023/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 1050mm 210 teeth 32 AT5/1050 SKU: 16687022](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-1050mm-210-teeth-32-at5-1050-sku-16687022/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 975mm 195 teeth 32 AT5/975 SKU: 16687021](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-975mm-195-teeth-32-at5-975-sku-16687021/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 825mm 165 teeth 32 AT5/825 SKU: 16687020](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-825mm-165-teeth-32-at5-825-sku-16687020/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 780mm 156 teeth 32 AT5/780 SKU: 16687019](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-780mm-156-teeth-32-at5-780-sku-16687019/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 750mm 150 teeth 32 AT5/750 SKU: 16687018](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-750mm-150-teeth-32-at5-750-sku-16687018/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 720mm 144 teeth 32 AT5/720 SKU: 16687017](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-720mm-144-teeth-32-at5-720-sku-16687017/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 660mm 132 teeth 32 AT5/660 SKU: 16687016](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-660mm-132-teeth-32-at5-660-sku-16687016/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 630mm 126 teeth 32 AT5/630 SKU: 16687015](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-630mm-126-teeth-32-at5-630-sku-16687015/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 610mm 122 teeth 32 AT5/610 SKU: 16687014](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-610mm-122-teeth-32-at5-610-sku-16687014/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 600mm 120 teeth 32 AT5/600 SKU: 16687013](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-600mm-120-teeth-32-at5-600-sku-16687013/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 545mm 109 teeth 32 AT5/545 SKU: 16687012](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-545mm-109-teeth-32-at5-545-sku-16687012/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 500mm 100 teeth 32 AT5/500 SKU: 16687011](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-500mm-100-teeth-32-at5-500-sku-16687011/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 455mm 91 teeth 32 AT5/455 SKU: 16687010](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-455mm-91-teeth-32-at5-455-sku-16687010/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 420mm 84 teeth 32 AT5/420 SKU: 16687009](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-420mm-84-teeth-32-at5-420-sku-16687009/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 390 78 teeth 32 AT5/390 SKU: 16687008](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-390-78-teeth-32-at5-390-sku-16687008/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 375mm 75 teeth 32 AT5/375 SKU: 16687007](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-375mm-75-teeth-32-at5-375-sku-16687007/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 340mm 68 teeth 32 AT5/340 SKU: 16687006](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-340mm-68-teeth-32-at5-340-sku-16687006/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 300mm 60 teeth 32 AT5/300 SKU: 16687005](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-300mm-60-teeth-32-at5-300-sku-16687005/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 280mm 56 teeth 32 AT5/280 SKU: 16687004](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-280mm-56-teeth-32-at5-280-sku-16687004/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm 32AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16687001](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-32at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16687001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 32mm 32 AT5 open length with tensile members from steel packed 2 x 16mm SKU: 16687000](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-32-at5-open-length-with-tensile-members-from-steel-packed-2-x-16mm-sku-16687000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT5 width 25mm Lw 1500mm 300 teeth 25 AT5/1500 SKU: 16682400](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-1500mm-300-teeth-25-at5-1500-sku-16682400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 1125mm 225 teeth 25 AT5/1125 SKU: 16682300](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-1125mm-225-teeth-25-at5-1125-sku-16682300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 1050mm 210 teeth 25 AT5/1050 SKU: 16682200](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-1050mm-210-teeth-25-at5-1050-sku-16682200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 975mm 195 teeth 25 AT5/975 SKU: 16682100](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-975mm-195-teeth-25-at5-975-sku-16682100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 825mm 165 teeth 25 AT5/825 SKU: 16682000](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-825mm-165-teeth-25-at5-825-sku-16682000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 780mm 156 teeth 25 AT5/780 SKU: 16681900](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-780mm-156-teeth-25-at5-780-sku-16681900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 750mm 150 teeth 25 AT5/750 SKU: 16681800](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-750mm-150-teeth-25-at5-750-sku-16681800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 720mm 144 teeth 25 AT5/720 SKU: 16681700](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-720mm-144-teeth-25-at5-720-sku-16681700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 660mm 132 teeth 25 AT5/660 SKU: 16681600](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-660mm-132-teeth-25-at5-660-sku-16681600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 630mm 126 teeth 25 AT5/630 SKU: 16681500](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-630mm-126-teeth-25-at5-630-sku-16681500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 610mm 122 teeth 25 AT5/610 SKU: 16681400](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-610mm-122-teeth-25-at5-610-sku-16681400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 600mm 120 teeth 25 AT5/600 SKU: 16681300](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-600mm-120-teeth-25-at5-600-sku-16681300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 545mm 109 teeth 25 AT5/545 SKU: 16681200](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-545mm-109-teeth-25-at5-545-sku-16681200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 500mm 100 teeth 25 AT5/500 SKU: 16681100](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-500mm-100-teeth-25-at5-500-sku-16681100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 455mm 91 teeth 25 AT5/455 SKU: 16681000](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-455mm-91-teeth-25-at5-455-sku-16681000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 420mm 84 teeth 25 AT5/420 SKU: 16680900](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-420mm-84-teeth-25-at5-420-sku-16680900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 390mm 78 teeth 25 AT5/390 SKU: 16680800](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-390mm-78-teeth-25-at5-390-sku-16680800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 375mm 75 teeth 25 AT5/375 SKU: 16680700](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-375mm-75-teeth-25-at5-375-sku-16680700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 340mm 68 teeth 25 AT5/340 SKU: 16680600](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-340mm-68-teeth-25-at5-340-sku-16680600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 300mm 60 teeth 25 AT5/300 SKU: 16680500](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-300mm-60-teeth-25-at5-300-sku-16680500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 280mm 56 teeth 25 AT5/280 SKU: 16680400](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-280mm-56-teeth-25-at5-280-sku-16680400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 275mm 55 teeth 25 AT5/275 SKU: 16680300](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-275mm-55-teeth-25-at5-275-sku-16680300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 255mm 51 teeth 25 AT5/255 SKU: 16680200](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-255mm-51-teeth-25-at5-255-sku-16680200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 225mm 45 teeth 25 AT5/225 SKU: 16680100](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-225mm-45-teeth-25-at5-225-sku-16680100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm 25AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16680001](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-25at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16680001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 25mm 25AT5 open length SKU: 16680000](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-25at5-open-length-sku-16680000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT5 belt width 16mm SKU: 16679900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-16mm-sku-16679900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Timing belt pulley steel AT5 112 teeth belt width 25mm for taper bush 2012 SKU: 16677494](https://maedler.in/product/timing-belt-pulley-steel-at5-112-teeth-belt-width-25mm-for-taper-bush-2012-sku-16677494/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 96 teeth belt width 25mm for taper bush 2012 SKU: 16677492](https://maedler.in/product/timing-belt-pulley-steel-at5-96-teeth-belt-width-25mm-for-taper-bush-2012-sku-16677492/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 90 teeth belt width 25mm for taper bush 1610 SKU: 16677490](https://maedler.in/product/timing-belt-pulley-steel-at5-90-teeth-belt-width-25mm-for-taper-bush-1610-sku-16677490/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 84 teeth belt width 25mm for taper bush 1610 SKU: 16677484](https://maedler.in/product/timing-belt-pulley-steel-at5-84-teeth-belt-width-25mm-for-taper-bush-1610-sku-16677484/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 80 teeth belt width 25mm for taper bush 1610 SKU: 16677480](https://maedler.in/product/timing-belt-pulley-steel-at5-80-teeth-belt-width-25mm-for-taper-bush-1610-sku-16677480/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 72 teeth belt width 25mm for taper bush 1610 SKU: 16677472](https://maedler.in/product/timing-belt-pulley-steel-at5-72-teeth-belt-width-25mm-for-taper-bush-1610-sku-16677472/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 64 teeth belt width 25mm for taper bush 1210 SKU: 16677464](https://maedler.in/product/timing-belt-pulley-steel-at5-64-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677464/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 60 teeth belt width 25mm for taper bush 1210 SKU: 16677460](https://maedler.in/product/timing-belt-pulley-steel-at5-60-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677460/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 56 teeth belt width 25mm for taper bush 1210 SKU: 16677456](https://maedler.in/product/timing-belt-pulley-steel-at5-56-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677456/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 48 teeth belt width 25mm for taper bush 1210 SKU: 16677448](https://maedler.in/product/timing-belt-pulley-steel-at5-48-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677448/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 44 teeth belt width 25mm for taper bush 1210 SKU: 16677444](https://maedler.in/product/timing-belt-pulley-steel-at5-44-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677444/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 40 teeth belt width 25mm for taper bush 1108 SKU: 16677440](https://maedler.in/product/timing-belt-pulley-steel-at5-40-teeth-belt-width-25mm-for-taper-bush-1108-sku-16677440/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 38 teeth belt width 25mm for taper bush 1108 SKU: 16677438](https://maedler.in/product/timing-belt-pulley-steel-at5-38-teeth-belt-width-25mm-for-taper-bush-1108-sku-16677438/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 36 teeth belt width 25mm for taper bush 1108 SKU: 16677436](https://maedler.in/product/timing-belt-pulley-steel-at5-36-teeth-belt-width-25mm-for-taper-bush-1108-sku-16677436/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 34 teeth belt width 25mm for taper bush 1008 SKU: 16677434](https://maedler.in/product/timing-belt-pulley-steel-at5-34-teeth-belt-width-25mm-for-taper-bush-1008-sku-16677434/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 112 teeth belt width 16mm for taper bush 2012 SKU: 16677394](https://maedler.in/product/timing-belt-pulley-steel-at5-112-teeth-belt-width-16mm-for-taper-bush-2012-sku-16677394/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 96 teeth belt width 16mm for taper bush 2012 SKU: 16677392](https://maedler.in/product/timing-belt-pulley-steel-at5-96-teeth-belt-width-16mm-for-taper-bush-2012-sku-16677392/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 90 teeth belt width 16mm for taper bush 1610 SKU: 16677390](https://maedler.in/product/timing-belt-pulley-steel-at5-90-teeth-belt-width-16mm-for-taper-bush-1610-sku-16677390/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 84 teeth belt width 16mm for taper bush 1610 SKU: 16677384](https://maedler.in/product/timing-belt-pulley-steel-at5-84-teeth-belt-width-16mm-for-taper-bush-1610-sku-16677384/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 80 teeth belt width 16mm for taper bush 1610 SKU: 16677380](https://maedler.in/product/timing-belt-pulley-steel-at5-80-teeth-belt-width-16mm-for-taper-bush-1610-sku-16677380/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 72 teeth belt width 16mm for taper bush 1610 SKU: 16677372](https://maedler.in/product/timing-belt-pulley-steel-at5-72-teeth-belt-width-16mm-for-taper-bush-1610-sku-16677372/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 64 teeth belt width 16mm for taper bush 1210 SKU: 16677364](https://maedler.in/product/timing-belt-pulley-steel-at5-64-teeth-belt-width-16mm-for-taper-bush-1210-sku-16677364/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 60 teeth belt width 16mm for taper bush 1210 SKU: 16677360](https://maedler.in/product/timing-belt-pulley-steel-at5-60-teeth-belt-width-16mm-for-taper-bush-1210-sku-16677360/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 56 teeth belt width 16mm for taper bush 1210 SKU: 16677356](https://maedler.in/product/timing-belt-pulley-steel-at5-56-teeth-belt-width-16mm-for-taper-bush-1210-sku-16677356/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 48 teeth belt width 16mm for taper bush 1210 SKU: 16677348](https://maedler.in/product/timing-belt-pulley-steel-at5-48-teeth-belt-width-16mm-for-taper-bush-1210-sku-16677348/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 44 teeth belt width 16mm for taper bush 1108 SKU: 16677344](https://maedler.in/product/timing-belt-pulley-steel-at5-44-teeth-belt-width-16mm-for-taper-bush-1108-sku-16677344/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 40 teeth belt width 16mm for taper bush 1108 SKU: 16677340](https://maedler.in/product/timing-belt-pulley-steel-at5-40-teeth-belt-width-16mm-for-taper-bush-1108-sku-16677340/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 38 teeth belt width 16mm for taper bush 1108 SKU: 16677338](https://maedler.in/product/timing-belt-pulley-steel-at5-38-teeth-belt-width-16mm-for-taper-bush-1108-sku-16677338/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 36 teeth belt width 16mm for taper bush 1108 SKU: 16677336](https://maedler.in/product/timing-belt-pulley-steel-at5-36-teeth-belt-width-16mm-for-taper-bush-1108-sku-16677336/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 34 teeth belt width 16mm for taper bush 1008 SKU: 16677334](https://maedler.in/product/timing-belt-pulley-steel-at5-34-teeth-belt-width-16mm-for-taper-bush-1008-sku-16677334/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt AT5 width 16mm Lw 1500mm 300 teeth 16 AT5/1500 SKU: 16672400](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-1500mm-300-teeth-16-at5-1500-sku-16672400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 1125mm 225 teeth 16 AT5/1125 SKU: 16672300](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-1125mm-225-teeth-16-at5-1125-sku-16672300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 1050mm 210 teeth 16 AT5/1050 SKU: 16672200](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-1050mm-210-teeth-16-at5-1050-sku-16672200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 975mm 195 teeth 16 AT5/975 SKU: 16672100](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-975mm-195-teeth-16-at5-975-sku-16672100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 825mm 165 teeth 16 AT5/825 SKU: 16672000](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-825mm-165-teeth-16-at5-825-sku-16672000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 780mm 156 teeth 16 AT5/780 SKU: 16671900](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-780mm-156-teeth-16-at5-780-sku-16671900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 750mm 150 teeth 16 AT5/750 SKU: 16671800](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-750mm-150-teeth-16-at5-750-sku-16671800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 720mm 144 teeth 16 AT5/720 SKU: 16671700](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-720mm-144-teeth-16-at5-720-sku-16671700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 660mm 132 teeth 16 AT5/660 SKU: 16671600](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-660mm-132-teeth-16-at5-660-sku-16671600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 630mm 126 teeth 16 AT5/630 SKU: 16671500](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-630mm-126-teeth-16-at5-630-sku-16671500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 610mm 122 teeth 16 AT5/610 SKU: 16671400](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-610mm-122-teeth-16-at5-610-sku-16671400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 600mm 120 teeth 16 AT5/600 SKU: 16671300](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-600mm-120-teeth-16-at5-600-sku-16671300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 545mm 109 teeth 16 AT5/545 SKU: 16671200](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-545mm-109-teeth-16-at5-545-sku-16671200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 500mm 100 teeth 16 AT5/500 SKU: 16671100](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-500mm-100-teeth-16-at5-500-sku-16671100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 455mm 91 teeth 16 AT5/455 SKU: 16671000](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-455mm-91-teeth-16-at5-455-sku-16671000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 420mm 84 teeth 16 AT5/420 SKU: 16670900](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-420mm-84-teeth-16-at5-420-sku-16670900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 390mm 78 teeth 16 AT5/390 SKU: 16670800](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-390mm-78-teeth-16-at5-390-sku-16670800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 375mm 75 teeth 16 AT5/375 SKU: 16670700](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-375mm-75-teeth-16-at5-375-sku-16670700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 340mm 68 teeth 16 AT5/340 SKU: 16670600](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-340mm-68-teeth-16-at5-340-sku-16670600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 300mm 60 teeth 16 AT5/300 SKU: 16670500](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-300mm-60-teeth-16-at5-300-sku-16670500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 280mm 56 teeth 16 AT5/280 SKU: 16670400](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-280mm-56-teeth-16-at5-280-sku-16670400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 25mm 40 AT10/20-2 SKU: 16832000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-25mm-40-at10-20-2-sku-16832000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 25mm 40 AT10/19-2 SKU: 16831900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-25mm-40-at10-19-2-sku-16831900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 25mm 40 AT10/18-2 SKU: 16831800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-25mm-40-at10-18-2-sku-16831800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 25 mm 40 AT10/17-2 SKU: 16831700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-25-mm-40-at10-17-2-sku-16831700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 25mm 40 AT10/16-2 SKU: 16831600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-25mm-40-at10-16-2-sku-16831600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 25mm 40 AT10/15-2 SKU: 16831500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-25mm-40-at10-15-2-sku-16831500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 96 teeth for belt width 16 mm 31 AT10/96-0 SKU: 16829600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-96-teeth-for-belt-width-16-mm-31-at10-96-0-sku-16829600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 84 teeth for belt width 16 mm 31 AT10/84-0 SKU: 16828400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-84-teeth-for-belt-width-16-mm-31-at10-84-0-sku-16828400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 16 mm 31 AT10/72-0 SKU: 16827200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-16-mm-31-at10-72-0-sku-16827200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 16mm 31 AT10/60-0 SKU: 16826000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-16mm-31-at10-60-0-sku-16826000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 16mm 31 AT10/48-0 SKU: 16824800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-16mm-31-at10-48-0-sku-16824800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 16mm 31 AT10/44-0 SKU: 16824400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-16mm-31-at10-44-0-sku-16824400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 16mm 31 AT10/40-2 SKU: 16824000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-16mm-31-at10-40-2-sku-16824000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 16mm 31 AT10/36-2 SKU: 16823600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-16mm-31-at10-36-2-sku-16823600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 16mm 31 AT10/32-2 SKU: 16823200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-16mm-31-at10-32-2-sku-16823200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 16mm 31 AT10/30-2 SKU: 16823000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-16mm-31-at10-30-2-sku-16823000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 16mm 31 AT10/28-2 SKU: 16822800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-16mm-31-at10-28-2-sku-16822800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 16mm 31 AT10/27-2 SKU: 16822700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-16mm-31-at10-27-2-sku-16822700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 16mm 31 AT10/26-2 SKU: 16822600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-16mm-31-at10-26-2-sku-16822600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 16mm 31 AT10/25-2 SKU: 16822500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-16mm-31-at10-25-2-sku-16822500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 16mm 31 AT10/24-2 SKU: 16822400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-16mm-31-at10-24-2-sku-16822400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 16mm 31 AT10/22-2 SKU: 16822200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-16mm-31-at10-22-2-sku-16822200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 16mm 31 AT10/20-2 SKU: 16822000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-16mm-31-at10-20-2-sku-16822000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 16mm 31 AT10/19-2 SKU: 16821900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-16mm-31-at10-19-2-sku-16821900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 16mm 31 AT10/18-2 SKU: 16821800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-16mm-31-at10-18-2-sku-16821800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 16 mm 31 AT10/17-2 SKU: 16821700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-16-mm-31-at10-17-2-sku-16821700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 16mm 31 AT10/16-2 SKU: 16821600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-16mm-31-at10-16-2-sku-16821600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 16mm 31 AT10/15-2 SKU: 16821500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-16mm-31-at10-15-2-sku-16821500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 96 teeth for belt width 40mm 55 AT10/96-0 SKU: 16819600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-96-teeth-for-belt-width-40mm-55-at10-96-0-sku-16819600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 84 teeth for belt width 40mm 55 AT10/84-0 SKU: 16818400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-84-teeth-for-belt-width-40mm-55-at10-84-0-sku-16818400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 40mm 55 AT10/72-0 SKU: 16817200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-40mm-55-at10-72-0-sku-16817200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 40mm 55 AT10/60-0 SKU: 16816000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-40mm-55-at10-60-0-sku-16816000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 40mm 55 AT10/48-0 SKU: 16814800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-40mm-55-at10-48-0-sku-16814800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 40mm 55 AT10/44-0 SKU: 16814400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-40mm-55-at10-44-0-sku-16814400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 40mm 55 AT10/40-2 SKU: 16814000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-40mm-55-at10-40-2-sku-16814000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 40mm 55 AT10/36-2 SKU: 16813600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-40mm-55-at10-36-2-sku-16813600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 40mm 55 AT10/32-2 SKU: 16813200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-40mm-55-at10-32-2-sku-16813200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 40mm 55 AT10/30-2 SKU: 16813000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-40mm-55-at10-30-2-sku-16813000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 40mm 55 AT10/28-2 SKU: 16812800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-40mm-55-at10-28-2-sku-16812800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 40mm 55 AT10/27-2 SKU: 16812700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-40mm-55-at10-27-2-sku-16812700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 40mm 55 AT10/26-2 SKU: 16812600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-40mm-55-at10-26-2-sku-16812600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 40mm 55 AT10/25-2 SKU: 16812500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-40mm-55-at10-25-2-sku-16812500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 40mm 55 AT10/24-2 SKU: 16812400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-40mm-55-at10-24-2-sku-16812400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 40mm 55 AT10/22-2 SKU: 16812200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-40mm-55-at10-22-2-sku-16812200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 40mm 55 AT10/20-2 SKU: 16812000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-40mm-55-at10-20-2-sku-16812000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 40mm 55 AT10/19-2 SKU: 16811900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-40mm-55-at10-19-2-sku-16811900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 40mm 55 AT10/18-2 SKU: 16811800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-40mm-55-at10-18-2-sku-16811800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 40mm 55 AT10/17-2 SKU: 16811700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-40mm-55-at10-17-2-sku-16811700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 40mm 55 AT10/16-2 SKU: 16811600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-40mm-55-at10-16-2-sku-16811600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 40mm 55 AT10/15-2 SKU: 16811500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-40mm-55-at10-15-2-sku-16811500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [timing bar AT5 40 teeth length 160mm material 1.4305 SKU: 16699940](https://maedler.in/product/timing-bar-at5-40-teeth-length-160mm-material-1-4305-sku-16699940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 36 teeth length 160mm material 1.4305 SKU: 16699936](https://maedler.in/product/timing-bar-at5-36-teeth-length-160mm-material-1-4305-sku-16699936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 32 teeth length 160mm material 1.4305 SKU: 16699932](https://maedler.in/product/timing-bar-at5-32-teeth-length-160mm-material-1-4305-sku-16699932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 30 teeth length 160mm material 1.4305 SKU: 16699930](https://maedler.in/product/timing-bar-at5-30-teeth-length-160mm-material-1-4305-sku-16699930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 25 teeth length 160mm material 1.4305 SKU: 16699925](https://maedler.in/product/timing-bar-at5-25-teeth-length-160mm-material-1-4305-sku-16699925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 24 teeth length 160mm material 1.4305 SKU: 16699924](https://maedler.in/product/timing-bar-at5-24-teeth-length-160mm-material-1-4305-sku-16699924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 20 teeth length 160mm material 1.4305 SKU: 16699920](https://maedler.in/product/timing-bar-at5-20-teeth-length-160mm-material-1-4305-sku-16699920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 18 teeth length 140mm material 1.4305 SKU: 16699918](https://maedler.in/product/timing-bar-at5-18-teeth-length-140mm-material-1-4305-sku-16699918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 16 teeth length 140mm material 1.4305 SKU: 16699916](https://maedler.in/product/timing-bar-at5-16-teeth-length-140mm-material-1-4305-sku-16699916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 15 teeth length 140mm material 1.4305 SKU: 16699915](https://maedler.in/product/timing-bar-at5-15-teeth-length-140mm-material-1-4305-sku-16699915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 96 teeth length 160mm material aluminium SKU: 16699600](https://maedler.in/product/timing-bar-at5-96-teeth-length-160mm-material-aluminium-sku-16699600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 84 teeth length 160mm material aluminium SKU: 16698400](https://maedler.in/product/timing-bar-at5-84-teeth-length-160mm-material-aluminium-sku-16698400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 72 teeth length 160mm material aluminium SKU: 16697200](https://maedler.in/product/timing-bar-at5-72-teeth-length-160mm-material-aluminium-sku-16697200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 64 teeth length 160mm material aluminium SKU: 16696400](https://maedler.in/product/timing-bar-at5-64-teeth-length-160mm-material-aluminium-sku-16696400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 60 teeth length 160mm material aluminium SKU: 16696000](https://maedler.in/product/timing-bar-at5-60-teeth-length-160mm-material-aluminium-sku-16696000/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 58 teeth length 160mm material aluminium SKU: 16695800](https://maedler.in/product/timing-bar-at5-58-teeth-length-160mm-material-aluminium-sku-16695800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 56 teeth length 160mm material aluminium SKU: 16695600](https://maedler.in/product/timing-bar-at5-56-teeth-length-160mm-material-aluminium-sku-16695600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 52 teeth length 160mm material aluminium SKU: 16695200](https://maedler.in/product/timing-bar-at5-52-teeth-length-160mm-material-aluminium-sku-16695200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 48 teeth length 160mm material aluminium SKU: 16694800](https://maedler.in/product/timing-bar-at5-48-teeth-length-160mm-material-aluminium-sku-16694800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 44 teeth length 160mm material aluminium SKU: 16694400](https://maedler.in/product/timing-bar-at5-44-teeth-length-160mm-material-aluminium-sku-16694400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 42 teeth length 160mm material aluminium SKU: 16694200](https://maedler.in/product/timing-bar-at5-42-teeth-length-160mm-material-aluminium-sku-16694200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 40 teeth length 160mm material aluminium SKU: 16694000](https://maedler.in/product/timing-bar-at5-40-teeth-length-160mm-material-aluminium-sku-16694000/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 38 teeth length 160mm material aluminium SKU: 16693800](https://maedler.in/product/timing-bar-at5-38-teeth-length-160mm-material-aluminium-sku-16693800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 36 teeth length 160mm material aluminium SKU: 16693600](https://maedler.in/product/timing-bar-at5-36-teeth-length-160mm-material-aluminium-sku-16693600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 34 teeth length 160mm material aluminium SKU: 16693400](https://maedler.in/product/timing-bar-at5-34-teeth-length-160mm-material-aluminium-sku-16693400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 32 teeth length 160mm material aluminium SKU: 16693200](https://maedler.in/product/timing-bar-at5-32-teeth-length-160mm-material-aluminium-sku-16693200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 30 teeth length 160mm material aluminium SKU: 16693000](https://maedler.in/product/timing-bar-at5-30-teeth-length-160mm-material-aluminium-sku-16693000/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 28 teeth length 160mm material aluminium SKU: 16692800](https://maedler.in/product/timing-bar-at5-28-teeth-length-160mm-material-aluminium-sku-16692800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 27 teeth length 160mm material aluminium SKU: 16692700](https://maedler.in/product/timing-bar-at5-27-teeth-length-160mm-material-aluminium-sku-16692700/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 26 teeth length 160mm material aluminium SKU: 16692600](https://maedler.in/product/timing-bar-at5-26-teeth-length-160mm-material-aluminium-sku-16692600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 25 teeth length 160mm material aluminium SKU: 16692500](https://maedler.in/product/timing-bar-at5-25-teeth-length-160mm-material-aluminium-sku-16692500/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 24 teeth length 160mm material aluminium SKU: 16692400](https://maedler.in/product/timing-bar-at5-24-teeth-length-160mm-material-aluminium-sku-16692400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 23 teeth length 160mm material aluminium SKU: 16692300](https://maedler.in/product/timing-bar-at5-23-teeth-length-160mm-material-aluminium-sku-16692300/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 22 teeth length 160mm material aluminium SKU: 16692200](https://maedler.in/product/timing-bar-at5-22-teeth-length-160mm-material-aluminium-sku-16692200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 21 teeth length 160mm material aluminium SKU: 16692100](https://maedler.in/product/timing-bar-at5-21-teeth-length-160mm-material-aluminium-sku-16692100/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 20 teeth length 160mm material aluminium SKU: 16692000](https://maedler.in/product/timing-bar-at5-20-teeth-length-160mm-material-aluminium-sku-16692000/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 19 teeth length 140mm material aluminium SKU: 16691900](https://maedler.in/product/timing-bar-at5-19-teeth-length-140mm-material-aluminium-sku-16691900/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 18 teeth length 140mm material aluminium SKU: 16691800](https://maedler.in/product/timing-bar-at5-18-teeth-length-140mm-material-aluminium-sku-16691800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 17 teeth length 140mm material aluminium SKU: 16691700](https://maedler.in/product/timing-bar-at5-17-teeth-length-140mm-material-aluminium-sku-16691700/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 16 teeth length 140mm material aluminium SKU: 16691600](https://maedler.in/product/timing-bar-at5-16-teeth-length-140mm-material-aluminium-sku-16691600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 15 teeth length 140mm material aluminium SKU: 16691500](https://maedler.in/product/timing-bar-at5-15-teeth-length-140mm-material-aluminium-sku-16691500/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 14 teeth length 140mm material aluminium SKU: 16691400](https://maedler.in/product/timing-bar-at5-14-teeth-length-140mm-material-aluminium-sku-16691400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 13 teeth length 140mm material aluminium SKU: 16691300](https://maedler.in/product/timing-bar-at5-13-teeth-length-140mm-material-aluminium-sku-16691300/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 12 teeth length 140mm material aluminium SKU: 16691200](https://maedler.in/product/timing-bar-at5-12-teeth-length-140mm-material-aluminium-sku-16691200/): Material: Aluminium similar EN AW2017A. - [Fixing plate for timing belts material aluminium AT5 belt width 50mm SKU: 16689901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-50mm-sku-16689901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium AT5 belt width 25mm SKU: 16689900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-25mm-sku-16689900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium AT5 belt width 32mm SKU: 16689800](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-32mm-sku-16689800/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt AT5 width 50mm 50AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16688001](https://maedler.in/product/polyurethane-timing-belt-at5-width-50mm-50at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16688001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 50mm 50 AT5 open length with tensile members from steel packed 2 x 25mm SKU: 16688000](https://maedler.in/product/polyurethane-timing-belt-at5-width-50mm-50-at5-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16688000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT5 width 32mm Lw 1500mm 300 teeth 32 AT5/1500 SKU: 16687024](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-1500mm-300-teeth-32-at5-1500-sku-16687024/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 890mm 89 teeth 25 AT10/890 SKU: 16871100](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-890mm-89-teeth-25-at10-890-sku-16871100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 840mm 84 teeth 25 AT10/840 SKU: 16871000](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-840mm-84-teeth-25-at10-840-sku-16871000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 810mm 81 teeth 25 AT10/810 SKU: 16870900](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-810mm-81-teeth-25-at10-810-sku-16870900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 800mm 80 teeth 25 AT10/800 SKU: 16870800](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-800mm-80-teeth-25-at10-800-sku-16870800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 780mm 78 teeth 25 AT10/780 SKU: 16870700](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-780mm-78-teeth-25-at10-780-sku-16870700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 730mm 73 teeth 25 AT10/730 SKU: 16870600](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-730mm-73-teeth-25-at10-730-sku-16870600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 700mm 70 teeth 25 AT10/700 SKU: 16870500](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-700mm-70-teeth-25-at10-700-sku-16870500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 660mm 66 teeth 25 AT10/660 SKU: 16870400](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-660mm-66-teeth-25-at10-660-sku-16870400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 610mm 61 teeth 25 AT10/610 SKU: 16870300](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-610mm-61-teeth-25-at10-610-sku-16870300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 560mm 56 teeth 25 AT10/560 SKU: 16870200](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-560mm-56-teeth-25-at10-560-sku-16870200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 500mm 50 teeth 25 AT10/500 SKU: 16870100](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-500mm-50-teeth-25-at10-500-sku-16870100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm 25AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16870001](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-25at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16870001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 25mm 25 AT10 open length SKU: 16870000](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-25-at10-open-length-sku-16870000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT10 belt width 16mm SKU: 16869900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-16mm-sku-16869900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt AT10 width 16mm Lw 1800mm 180 teeth 16 AT10/1800 SKU: 16862600](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1800mm-180-teeth-16-at10-1800-sku-16862600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1700mm 170 teeth 16 AT10/1700 SKU: 16862500](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1700mm-170-teeth-16-at10-1700-sku-16862500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1600mm 160 teeth 16 AT10/1600 SKU: 16862400](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1600mm-160-teeth-16-at10-1600-sku-16862400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1500mm 150 teeth 16 AT10/1500 SKU: 16862300](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1500mm-150-teeth-16-at10-1500-sku-16862300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1400mm 140 teeth 16 AT10/1400 SKU: 16862200](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1400mm-140-teeth-16-at10-1400-sku-16862200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1320mm 132 teeth 16 AT10/1320 SKU: 16862100](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1320mm-132-teeth-16-at10-1320-sku-16862100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1250mm 125 teeth 16 AT10/1250 SKU: 16862000](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1250mm-125-teeth-16-at10-1250-sku-16862000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1210mm 121 teeth 16 AT10/1210 SKU: 16861900](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1210mm-121-teeth-16-at10-1210-sku-16861900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1150mm 115 teeth 16 AT10/1150 SKU: 16861800](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1150mm-115-teeth-16-at10-1150-sku-16861800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1080mm 108 teeth 16 AT10/1080 SKU: 16861700](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1080mm-108-teeth-16-at10-1080-sku-16861700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1050mm 105 teeth 16 AT10/1050 SKU: 16861600](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1050mm-105-teeth-16-at10-1050-sku-16861600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1010mm 101 teeth 16 AT10/1010 SKU: 16861500](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1010mm-101-teeth-16-at10-1010-sku-16861500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 980mm 98 teeth 16 AT10/980 SKU: 16861400](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-980mm-98-teeth-16-at10-980-sku-16861400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 960mm 96 teeth 16 AT10/960 SKU: 16861300](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-960mm-96-teeth-16-at10-960-sku-16861300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 920mm 92 teeth 16 AT10/920 SKU: 16861200](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-920mm-92-teeth-16-at10-920-sku-16861200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 890mm 89 teeth 16 AT10/890 SKU: 16861100](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-890mm-89-teeth-16-at10-890-sku-16861100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 840mm 84 teeth 16 AT10/840 SKU: 16861000](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-840mm-84-teeth-16-at10-840-sku-16861000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 810mm 81 teeth 16 AT10/810 SKU: 16860900](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-810mm-81-teeth-16-at10-810-sku-16860900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 800mm 80 teeth 16 AT10/800 SKU: 16860800](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-800mm-80-teeth-16-at10-800-sku-16860800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 780mm 78 teeth 16 AT10/780 SKU: 16860700](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-780mm-78-teeth-16-at10-780-sku-16860700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 730mm 73 teeth 16 AT10/730 SKU: 16860600](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-730mm-73-teeth-16-at10-730-sku-16860600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 700mm 70 teeth 16 AT10/700 SKU: 16860500](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-700mm-70-teeth-16-at10-700-sku-16860500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 660mm 66 teeth 16 AT10/660 SKU: 16860400](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-660mm-66-teeth-16-at10-660-sku-16860400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 610mm 61 teeth 16 AT10/610 SKU: 16860300](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-610mm-61-teeth-16-at10-610-sku-16860300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 560mm 56 teeth 16 AT10/560 SKU: 16860200](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-560mm-56-teeth-16-at10-560-sku-16860200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 500mm 50 teeth 16 AT10/500 SKU: 16860100](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-500mm-50-teeth-16-at10-500-sku-16860100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm 16AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16860001](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-16at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16860001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 16mm 16 AT10 open length SKU: 16860000](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-16-at10-open-length-sku-16860000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 50 mm 66 AT10/72-0 SKU: 16857200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-50-mm-66-at10-72-0-sku-16857200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 50mm 66 AT10/60-0 SKU: 16856000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-50mm-66-at10-60-0-sku-16856000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 50mm 66 AT10/48-0 SKU: 16854800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-50mm-66-at10-48-0-sku-16854800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 50mm 66 AT10/44-0 SKU: 16854400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-50mm-66-at10-44-0-sku-16854400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 50mm 66 AT10/40-2 SKU: 16854000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-50mm-66-at10-40-2-sku-16854000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 50mm 66 AT10/36-2 SKU: 16853600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-50mm-66-at10-36-2-sku-16853600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 50mm 66 AT10/32-2 SKU: 16853200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-50mm-66-at10-32-2-sku-16853200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 50mm 66 AT10/30-2 SKU: 16853000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-50mm-66-at10-30-2-sku-16853000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 50mm 66 AT10/28-2 SKU: 16852800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-50mm-66-at10-28-2-sku-16852800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 50mm 66 AT10/27-2 SKU: 16852700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-50mm-66-at10-27-2-sku-16852700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 50mm 66 AT10/26-2 SKU: 16852600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-50mm-66-at10-26-2-sku-16852600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 50mm 66 AT10/25-2 SKU: 16852500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-50mm-66-at10-25-2-sku-16852500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 50mm 66 AT10/24-2 SKU: 16852400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-50mm-66-at10-24-2-sku-16852400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 50mm 66 AT10/22-2 SKU: 16852200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-50mm-66-at10-22-2-sku-16852200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 50mm 66 AT10/20-2 SKU: 16852000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-50mm-66-at10-20-2-sku-16852000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 50mm 66 AT10/19-2 SKU: 16851900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-50mm-66-at10-19-2-sku-16851900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 50mm 66 AT10/18-2 SKU: 16851800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-50mm-66-at10-18-2-sku-16851800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 50 mm 66 AT10/17-2 SKU: 16851700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-50-mm-66-at10-17-2-sku-16851700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 50mm 66 AT10/16-2 SKU: 16851600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-50mm-66-at10-16-2-sku-16851600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 50mm 66 AT10/15-2 SKU: 16851500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-50mm-66-at10-15-2-sku-16851500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 96 teeth for belt width 32 mm 47 AT10/96-0 SKU: 16849600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-96-teeth-for-belt-width-32-mm-47-at10-96-0-sku-16849600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 84 teeth for belt width 32 mm 47 AT10/84-0 SKU: 16848400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-84-teeth-for-belt-width-32-mm-47-at10-84-0-sku-16848400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 32 mm 47 AT10/72-0 SKU: 16847200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-32-mm-47-at10-72-0-sku-16847200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 32mm 47 AT10/60-0 SKU: 16846000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-32mm-47-at10-60-0-sku-16846000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 32mm 47 AT10/48-0 SKU: 16844800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-32mm-47-at10-48-0-sku-16844800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 32mm 47 AT10/44-0 SKU: 16844400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-32mm-47-at10-44-0-sku-16844400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 32mm 47 AT10/40-2 SKU: 16844000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-32mm-47-at10-40-2-sku-16844000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 32mm 47 AT10/36-2 SKU: 16843600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-32mm-47-at10-36-2-sku-16843600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 32mm 47 AT10/32-2 SKU: 16843200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-32mm-47-at10-32-2-sku-16843200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 32mm 47 AT10/30-2 SKU: 16843000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-32mm-47-at10-30-2-sku-16843000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 32mm 47 AT10/28-2 SKU: 16842800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-32mm-47-at10-28-2-sku-16842800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 32mm 47 AT10/27-2 SKU: 16842700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-32mm-47-at10-27-2-sku-16842700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 32mm 47 AT10/26-2 SKU: 16842600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-32mm-47-at10-26-2-sku-16842600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 32mm 47 AT10/25-2 SKU: 16842500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-32mm-47-at10-25-2-sku-16842500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 32mm 47 AT10/24-2 SKU: 16842400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-32mm-47-at10-24-2-sku-16842400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 32mm 47 AT10/22-2 SKU: 16842200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-32mm-47-at10-22-2-sku-16842200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 32mm 47 AT10/20-2 SKU: 16842000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-32mm-47-at10-20-2-sku-16842000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 32mm 47 AT10/19-2 SKU: 16841900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-32mm-47-at10-19-2-sku-16841900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 32mm 47 AT10/18-2 SKU: 16841800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-32mm-47-at10-18-2-sku-16841800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 32 mm 47 AT10/17-2 SKU: 16841700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-32-mm-47-at10-17-2-sku-16841700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 32mm 47 AT10/16-2 SKU: 16841600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-32mm-47-at10-16-2-sku-16841600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 32mm 47 AT10/15-2 SKU: 16841500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-32mm-47-at10-15-2-sku-16841500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 96 teeth for belt width 25 mm 40 AT10/96-0 SKU: 16839600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-96-teeth-for-belt-width-25-mm-40-at10-96-0-sku-16839600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 84 teeth for belt width 25 mm 40 AT10/84-0 SKU: 16838400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-84-teeth-for-belt-width-25-mm-40-at10-84-0-sku-16838400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 25 mm 40 AT10/72-0 SKU: 16837200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-25-mm-40-at10-72-0-sku-16837200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 25mm 40 AT10/60-0 SKU: 16836000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-25mm-40-at10-60-0-sku-16836000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 25mm 40 AT10/48-0 SKU: 16834800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-25mm-40-at10-48-0-sku-16834800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 25mm 40 AT10/44-0 SKU: 16834400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-25mm-40-at10-44-0-sku-16834400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 25mm 40 AT10/40-2 SKU: 16834000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-25mm-40-at10-40-2-sku-16834000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 25mm 40 AT10/36-2 SKU: 16833600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-25mm-40-at10-36-2-sku-16833600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 25mm 40 AT10/32-2 SKU: 16833200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-25mm-40-at10-32-2-sku-16833200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 25mm 40 AT10/30-2 SKU: 16833000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-25mm-40-at10-30-2-sku-16833000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 25mm 40 AT10/28-2 SKU: 16832800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-25mm-40-at10-28-2-sku-16832800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 25mm 40 AT10/27-2 SKU: 16832700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-25mm-40-at10-27-2-sku-16832700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 25mm 40 AT10/26-2 SKU: 16832600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-25mm-40-at10-26-2-sku-16832600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 25mm 40 AT10/25-2 SKU: 16832500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-25mm-40-at10-25-2-sku-16832500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 25mm 40 AT10/24-2 SKU: 16832400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-25mm-40-at10-24-2-sku-16832400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 25mm 40 AT10/22-2 SKU: 16832200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-25mm-40-at10-22-2-sku-16832200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Polyurethane timing belt AT10 width 32mm Lw 1400mm 140 teeth 32 AT10/1400 SKU: 16882200](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1400mm-140-teeth-32-at10-1400-sku-16882200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1320mm 132 teeth 32 AT10/1320 SKU: 16882100](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1320mm-132-teeth-32-at10-1320-sku-16882100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1250mm 125 teeth 32 AT10/1250 SKU: 16882000](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1250mm-125-teeth-32-at10-1250-sku-16882000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1210mm 121 teeth 32 AT10/1210 SKU: 16881900](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1210mm-121-teeth-32-at10-1210-sku-16881900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1150mm 115 teeth 32 AT10/1150 SKU: 16881800](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1150mm-115-teeth-32-at10-1150-sku-16881800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1080mm 108 teeth 32 AT10/1080 SKU: 16881700](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1080mm-108-teeth-32-at10-1080-sku-16881700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1050mm 105 teeth 32 AT10/1050 SKU: 16881600](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1050mm-105-teeth-32-at10-1050-sku-16881600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1010mm 101 teeth 32 AT10/1010 SKU: 16881500](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1010mm-101-teeth-32-at10-1010-sku-16881500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 980mm 98 teeth 32 AT10/980 SKU: 16881400](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-980mm-98-teeth-32-at10-980-sku-16881400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 960mm 96 teeth 32 AT10/960 SKU: 16881300](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-960mm-96-teeth-32-at10-960-sku-16881300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 920mm 92 teeth 32 AT10/920 SKU: 16881200](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-920mm-92-teeth-32-at10-920-sku-16881200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 890mm 89 teeth 32 AT10/890 SKU: 16881100](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-890mm-89-teeth-32-at10-890-sku-16881100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 840mm 84 teeth 32 AT10/840 SKU: 16881000](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-840mm-84-teeth-32-at10-840-sku-16881000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 810mm 81 teeth 32 AT10/810 SKU: 16880900](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-810mm-81-teeth-32-at10-810-sku-16880900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 800mm 80 teeth 32 AT10/800 SKU: 16880800](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-800mm-80-teeth-32-at10-800-sku-16880800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 780mm 78 teeth 32 AT10/780 SKU: 16880700](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-780mm-78-teeth-32-at10-780-sku-16880700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 730mm 73 teeth 32 AT10/730 SKU: 16880600](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-730mm-73-teeth-32-at10-730-sku-16880600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 700mm 70 teeth 32 AT10/700 SKU: 16880500](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-700mm-70-teeth-32-at10-700-sku-16880500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 660mm 66 teeth 32 AT10/660 SKU: 16880400](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-660mm-66-teeth-32-at10-660-sku-16880400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 610mm 61 teeth 32 AT10/610 SKU: 16880300](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-610mm-61-teeth-32-at10-610-sku-16880300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 560mm 56 teeth 32 AT10/560 SKU: 16880200](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-560mm-56-teeth-32-at10-560-sku-16880200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 500mm 50 teeth 32 AT10/500 SKU: 16880100](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-500mm-50-teeth-32-at10-500-sku-16880100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm 32AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16880001](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-32at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16880001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 32mm 32 AT10 open length with tensile members from steel packed 2 x 16mm SKU: 16880000](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-32-at10-open-length-with-tensile-members-from-steel-packed-2-x-16mm-sku-16880000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT10 belt width 25mm SKU: 16879900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-25mm-sku-16879900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Timing belt pulley from steel AT10 96 teeth belt width 32mm for taper bush 2517 SKU: 16877496](https://maedler.in/product/timing-belt-pulley-from-steel-at10-96-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877496/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 84 teeth belt width 32mm for taper bush 2517 SKU: 16877484](https://maedler.in/product/timing-belt-pulley-from-steel-at10-84-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877484/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 72 teeth belt width 32mm for taper bush 2517 SKU: 16877472](https://maedler.in/product/timing-belt-pulley-from-steel-at10-72-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877472/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 60 teeth belt width 32mm for taper bush 2517 SKU: 16877460](https://maedler.in/product/timing-belt-pulley-from-steel-at10-60-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877460/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 48 teeth belt width 32mm for taper bush 2517 SKU: 16877448](https://maedler.in/product/timing-belt-pulley-from-steel-at10-48-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877448/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 44 teeth belt width 32mm for taper bush 2012 SKU: 16877444](https://maedler.in/product/timing-belt-pulley-from-steel-at10-44-teeth-belt-width-32mm-for-taper-bush-2012-sku-16877444/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 40 teeth belt width 32mm for taper bush 2012 SKU: 16877440](https://maedler.in/product/timing-belt-pulley-from-steel-at10-40-teeth-belt-width-32mm-for-taper-bush-2012-sku-16877440/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 36 teeth belt width 32mm for taper bush 2012 SKU: 16877436](https://maedler.in/product/timing-belt-pulley-from-steel-at10-36-teeth-belt-width-32mm-for-taper-bush-2012-sku-16877436/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 32 teeth belt width 32mm for taper bush 1615 SKU: 16877432](https://maedler.in/product/timing-belt-pulley-from-steel-at10-32-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877432/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 30 teeth belt width 32mm for taper bush 1615 SKU: 16877430](https://maedler.in/product/timing-belt-pulley-from-steel-at10-30-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877430/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 28 teeth belt width 32mm for taper bush 1615 SKU: 16877428](https://maedler.in/product/timing-belt-pulley-from-steel-at10-28-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877428/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 27 teeth belt width 32mm for taper bush 1615 SKU: 16877427](https://maedler.in/product/timing-belt-pulley-from-steel-at10-27-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877427/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 26 teeth belt width 32mm for taper bush 1615 SKU: 16877426](https://maedler.in/product/timing-belt-pulley-from-steel-at10-26-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877426/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 25 teeth belt width 32mm for taper bush 1615 SKU: 16877425](https://maedler.in/product/timing-belt-pulley-from-steel-at10-25-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877425/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 24 teeth belt width 32mm for taper bush 1615 SKU: 16877424](https://maedler.in/product/timing-belt-pulley-from-steel-at10-24-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877424/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 22 teeth belt width 32mm for taper bush 1210 SKU: 16877422](https://maedler.in/product/timing-belt-pulley-from-steel-at10-22-teeth-belt-width-32mm-for-taper-bush-1210-sku-16877422/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 20 teeth belt width 32mm for taper bush 1108 SKU: 16877420](https://maedler.in/product/timing-belt-pulley-from-steel-at10-20-teeth-belt-width-32mm-for-taper-bush-1108-sku-16877420/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 19 teeth belt width 32mm for taper bush 1108 SKU: 16877419](https://maedler.in/product/timing-belt-pulley-from-steel-at10-19-teeth-belt-width-32mm-for-taper-bush-1108-sku-16877419/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 18 teeth belt width 32mm for taper bush 1008 SKU: 16877418](https://maedler.in/product/timing-belt-pulley-from-steel-at10-18-teeth-belt-width-32mm-for-taper-bush-1008-sku-16877418/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 96 teeth belt width 25mm for taper bush 2517 SKU: 16877396](https://maedler.in/product/timing-belt-pulley-from-steel-at10-96-teeth-belt-width-25mm-for-taper-bush-2517-sku-16877396/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 84 teeth belt width 25mm for taper bush 2517 SKU: 16877384](https://maedler.in/product/timing-belt-pulley-from-steel-at10-84-teeth-belt-width-25mm-for-taper-bush-2517-sku-16877384/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 72 teeth belt width 25mm for taper bush 2517 SKU: 16877372](https://maedler.in/product/timing-belt-pulley-from-steel-at10-72-teeth-belt-width-25mm-for-taper-bush-2517-sku-16877372/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 60 teeth belt width 25mm for taper bush 2012 SKU: 16877360](https://maedler.in/product/timing-belt-pulley-from-steel-at10-60-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877360/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 48 teeth belt width 25mm for taper bush 2012 SKU: 16877348](https://maedler.in/product/timing-belt-pulley-from-steel-at10-48-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877348/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 44 teeth belt width 25mm for taper bush 2012 SKU: 16877344](https://maedler.in/product/timing-belt-pulley-from-steel-at10-44-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877344/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 40 teeth belt width 25mm for taper bush 2012 SKU: 16877340](https://maedler.in/product/timing-belt-pulley-from-steel-at10-40-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877340/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 36 teeth belt width 25mm for taper bush 2012 SKU: 16877336](https://maedler.in/product/timing-belt-pulley-from-steel-at10-36-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877336/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 32 teeth belt width 25mm for taper bush 1610 SKU: 16877332](https://maedler.in/product/timing-belt-pulley-from-steel-at10-32-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877332/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 30 teeth belt width 25mm for taper bush 1610 SKU: 16877330](https://maedler.in/product/timing-belt-pulley-from-steel-at10-30-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877330/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 28 teeth belt width 25mm for taper bush 1610 SKU: 16877328](https://maedler.in/product/timing-belt-pulley-from-steel-at10-28-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877328/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 27 teeth belt width 25mm for taper bush 1610 SKU: 16877327](https://maedler.in/product/timing-belt-pulley-from-steel-at10-27-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877327/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 26 teeth belt width 25mm for taper bush 1610 SKU: 16877326](https://maedler.in/product/timing-belt-pulley-from-steel-at10-26-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877326/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 25 teeth belt width 25mm for taper bush 1108 SKU: 16877325](https://maedler.in/product/timing-belt-pulley-from-steel-at10-25-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877325/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 24 teeth belt width 25mm for taper bush 1108 SKU: 16877324](https://maedler.in/product/timing-belt-pulley-from-steel-at10-24-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877324/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 22 teeth belt width 25mm for taper bush 1108 SKU: 16877322](https://maedler.in/product/timing-belt-pulley-from-steel-at10-22-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877322/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 20 teeth belt width 25mm for taper bush 1108 SKU: 16877320](https://maedler.in/product/timing-belt-pulley-from-steel-at10-20-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877320/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 19 teeth belt width 25mm for taper bush 1108 SKU: 16877319](https://maedler.in/product/timing-belt-pulley-from-steel-at10-19-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877319/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 18 teeth belt width 25mm for taper bush 1008 SKU: 16877318](https://maedler.in/product/timing-belt-pulley-from-steel-at10-18-teeth-belt-width-25mm-for-taper-bush-1008-sku-16877318/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 96 teeth belt width 16mm for taper bush 2517 SKU: 16877296](https://maedler.in/product/timing-belt-pulley-from-steel-at10-96-teeth-belt-width-16mm-for-taper-bush-2517-sku-16877296/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 84 teeth belt width 16mm for taper bush 2517 SKU: 16877284](https://maedler.in/product/timing-belt-pulley-from-steel-at10-84-teeth-belt-width-16mm-for-taper-bush-2517-sku-16877284/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 72 teeth belt width 16mm for taper bush 2517 SKU: 16877272](https://maedler.in/product/timing-belt-pulley-from-steel-at10-72-teeth-belt-width-16mm-for-taper-bush-2517-sku-16877272/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 64 teeth belt width 16mm for taper bush 2517 SKU: 16877264](https://maedler.in/product/timing-belt-pulley-from-steel-at10-64-teeth-belt-width-16mm-for-taper-bush-2517-sku-16877264/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 60 teeth belt width 16mm for taper bush 2012 SKU: 16877260](https://maedler.in/product/timing-belt-pulley-from-steel-at10-60-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877260/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 56 teeth belt width 16mm for taper bush 2012 SKU: 16877256](https://maedler.in/product/timing-belt-pulley-from-steel-at10-56-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877256/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 48 teeth belt width 16mm for taper bush 2012 SKU: 16877248](https://maedler.in/product/timing-belt-pulley-from-steel-at10-48-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877248/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 44 teeth belt width 16mm for taper bush 2012 SKU: 16877244](https://maedler.in/product/timing-belt-pulley-from-steel-at10-44-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877244/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 42 teeth belt width 16mm for taper bush 2012 SKU: 16877242](https://maedler.in/product/timing-belt-pulley-from-steel-at10-42-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877242/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 40 teeth belt width 16mm for taper bush 1610 SKU: 16877240](https://maedler.in/product/timing-belt-pulley-from-steel-at10-40-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877240/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 36 teeth belt width 16mm for taper bush 1610 SKU: 16877236](https://maedler.in/product/timing-belt-pulley-from-steel-at10-36-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877236/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 32 teeth belt width 16mm for taper bush 1610 SKU: 16877232](https://maedler.in/product/timing-belt-pulley-from-steel-at10-32-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877232/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 30 teeth belt width 16mm for taper bush 1610 SKU: 16877230](https://maedler.in/product/timing-belt-pulley-from-steel-at10-30-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877230/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 28 teeth belt width 16mm for taper bush 1610 SKU: 16877228](https://maedler.in/product/timing-belt-pulley-from-steel-at10-28-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877228/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 27 teeth belt width 16mm for taper bush 1210 SKU: 16877227](https://maedler.in/product/timing-belt-pulley-from-steel-at10-27-teeth-belt-width-16mm-for-taper-bush-1210-sku-16877227/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 26 teeth belt width 16mm for taper bush 1210 SKU: 16877226](https://maedler.in/product/timing-belt-pulley-from-steel-at10-26-teeth-belt-width-16mm-for-taper-bush-1210-sku-16877226/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 25 teeth belt width 16mm for taper bush 1210 SKU: 16877225](https://maedler.in/product/timing-belt-pulley-from-steel-at10-25-teeth-belt-width-16mm-for-taper-bush-1210-sku-16877225/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 24 teeth belt width 16mm for taper bush 1210 SKU: 16877224](https://maedler.in/product/timing-belt-pulley-from-steel-at10-24-teeth-belt-width-16mm-for-taper-bush-1210-sku-16877224/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 22 teeth belt width 16mm for taper bush 1108 SKU: 16877222](https://maedler.in/product/timing-belt-pulley-from-steel-at10-22-teeth-belt-width-16mm-for-taper-bush-1108-sku-16877222/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 20 teeth belt width 16mm for taper bush 1108 SKU: 16877220](https://maedler.in/product/timing-belt-pulley-from-steel-at10-20-teeth-belt-width-16mm-for-taper-bush-1108-sku-16877220/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 19 teeth belt width 16mm for taper bush 1108 SKU: 16877219](https://maedler.in/product/timing-belt-pulley-from-steel-at10-19-teeth-belt-width-16mm-for-taper-bush-1108-sku-16877219/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 18 teeth belt width 16mm for taper bush 1008 SKU: 16877218](https://maedler.in/product/timing-belt-pulley-from-steel-at10-18-teeth-belt-width-16mm-for-taper-bush-1008-sku-16877218/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt AT10 width 25mm Lw 1800mm 180 teeth 25 AT10/1800 SKU: 16872600](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1800mm-180-teeth-25-at10-1800-sku-16872600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1700mm 170 teeth 25 AT10/1700 SKU: 16872500](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1700mm-170-teeth-25-at10-1700-sku-16872500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1600mm 160 teeth 25 AT10/1600 SKU: 16872400](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1600mm-160-teeth-25-at10-1600-sku-16872400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1500mm 150 teeth 25 AT10/1500 SKU: 16872300](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1500mm-150-teeth-25-at10-1500-sku-16872300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1400mm 140 teeth 25 AT10/1400 SKU: 16872200](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1400mm-140-teeth-25-at10-1400-sku-16872200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1320mm 132 teeth 25 AT10/1320 SKU: 16872100](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1320mm-132-teeth-25-at10-1320-sku-16872100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1250mm 125 teeth 25 AT10/1250 SKU: 16872000](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1250mm-125-teeth-25-at10-1250-sku-16872000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1210mm 121 teeth 25 AT10/1210 SKU: 16871900](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1210mm-121-teeth-25-at10-1210-sku-16871900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1150mm 115 teeth 25 AT10/1150 SKU: 16871800](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1150mm-115-teeth-25-at10-1150-sku-16871800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1080mm 108 teeth 25 AT10/1080 SKU: 16871700](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1080mm-108-teeth-25-at10-1080-sku-16871700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1050mm 105 teeth 25 AT10/1050 SKU: 16871600](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1050mm-105-teeth-25-at10-1050-sku-16871600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1010mm 101 teeth 25 AT10/1010 SKU: 16871500](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1010mm-101-teeth-25-at10-1010-sku-16871500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 980mm 98 teeth 25 AT10/980 SKU: 16871400](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-980mm-98-teeth-25-at10-980-sku-16871400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 960mm 96 teeth 25 AT10/960 SKU: 16871300](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-960mm-96-teeth-25-at10-960-sku-16871300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 920mm 92 teeth 25 AT10/920 SKU: 16871200](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-920mm-92-teeth-25-at10-920-sku-16871200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [timing bar AT10 30 teeth length 160mm material 1.4305 SKU: 16899930](https://maedler.in/product/timing-bar-at10-30-teeth-length-160mm-material-1-4305-sku-16899930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 25 teeth length 160mm material 1.4305 SKU: 16899925](https://maedler.in/product/timing-bar-at10-25-teeth-length-160mm-material-1-4305-sku-16899925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 24 teeth length 160mm material 1.4305 SKU: 16899924](https://maedler.in/product/timing-bar-at10-24-teeth-length-160mm-material-1-4305-sku-16899924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 22 teeth length 160mm material 1.4305 SKU: 16899922](https://maedler.in/product/timing-bar-at10-22-teeth-length-160mm-material-1-4305-sku-16899922/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 20 teeth length 160mm material 1.4305 SKU: 16899920](https://maedler.in/product/timing-bar-at10-20-teeth-length-160mm-material-1-4305-sku-16899920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 18 teeth length 160mm material 1.4305 SKU: 16899918](https://maedler.in/product/timing-bar-at10-18-teeth-length-160mm-material-1-4305-sku-16899918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 16 teeth length 160mm material 1.4305 SKU: 16899916](https://maedler.in/product/timing-bar-at10-16-teeth-length-160mm-material-1-4305-sku-16899916/): Material: Stainless steel 1.4305 (AISI 303). - [Fixing plate for timing belts material aluminium AT10 belt width 100mm SKU: 16899901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-100mm-sku-16899901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium AT10 belt width 50mm SKU: 16899900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-50mm-sku-16899900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [timing bar AT10 70 teeth length 160mm material aluminium SKU: 16897000](https://maedler.in/product/timing-bar-at10-70-teeth-length-160mm-material-aluminium-sku-16897000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 60 teeth length 160mm material aluminium SKU: 16896000](https://maedler.in/product/timing-bar-at10-60-teeth-length-160mm-material-aluminium-sku-16896000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 56 teeth length 160mm material aluminium SKU: 16895600](https://maedler.in/product/timing-bar-at10-56-teeth-length-160mm-material-aluminium-sku-16895600/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 52 teeth length 160mm material aluminium SKU: 16895200](https://maedler.in/product/timing-bar-at10-52-teeth-length-160mm-material-aluminium-sku-16895200/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 48 teeth length 160mm material aluminium SKU: 16894800](https://maedler.in/product/timing-bar-at10-48-teeth-length-160mm-material-aluminium-sku-16894800/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 44 teeth length 160mm material aluminium SKU: 16894400](https://maedler.in/product/timing-bar-at10-44-teeth-length-160mm-material-aluminium-sku-16894400/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 42 teeth length 160mm material aluminium SKU: 16894200](https://maedler.in/product/timing-bar-at10-42-teeth-length-160mm-material-aluminium-sku-16894200/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 40 teeth length 160mm material aluminium SKU: 16894000](https://maedler.in/product/timing-bar-at10-40-teeth-length-160mm-material-aluminium-sku-16894000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 38 teeth length 160mm material aluminium SKU: 16893800](https://maedler.in/product/timing-bar-at10-38-teeth-length-160mm-material-aluminium-sku-16893800/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 36 teeth length 160mm material aluminium SKU: 16893600](https://maedler.in/product/timing-bar-at10-36-teeth-length-160mm-material-aluminium-sku-16893600/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 34 teeth length 160mm material aluminium SKU: 16893400](https://maedler.in/product/timing-bar-at10-34-teeth-length-160mm-material-aluminium-sku-16893400/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 32 teeth length 160mm material aluminium SKU: 16893200](https://maedler.in/product/timing-bar-at10-32-teeth-length-160mm-material-aluminium-sku-16893200/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 30 teeth length 160mm material aluminium SKU: 16893000](https://maedler.in/product/timing-bar-at10-30-teeth-length-160mm-material-aluminium-sku-16893000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 28 teeth length 160mm material aluminium SKU: 16892800](https://maedler.in/product/timing-bar-at10-28-teeth-length-160mm-material-aluminium-sku-16892800/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 27 teeth length 160mm material aluminium SKU: 16892700](https://maedler.in/product/timing-bar-at10-27-teeth-length-160mm-material-aluminium-sku-16892700/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 26 teeth length 160mm material aluminium SKU: 16892600](https://maedler.in/product/timing-bar-at10-26-teeth-length-160mm-material-aluminium-sku-16892600/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 25 teeth length 160mm material aluminium SKU: 16892500](https://maedler.in/product/timing-bar-at10-25-teeth-length-160mm-material-aluminium-sku-16892500/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 24 teeth length 160mm material aluminium SKU: 16892400](https://maedler.in/product/timing-bar-at10-24-teeth-length-160mm-material-aluminium-sku-16892400/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 23 teeth length 160mm material aluminium SKU: 16892300](https://maedler.in/product/timing-bar-at10-23-teeth-length-160mm-material-aluminium-sku-16892300/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 22 teeth length 160mm material aluminium SKU: 16892200](https://maedler.in/product/timing-bar-at10-22-teeth-length-160mm-material-aluminium-sku-16892200/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 21 teeth length 160mm material aluminium SKU: 16892100](https://maedler.in/product/timing-bar-at10-21-teeth-length-160mm-material-aluminium-sku-16892100/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 20 teeth length 160mm material aluminium SKU: 16892000](https://maedler.in/product/timing-bar-at10-20-teeth-length-160mm-material-aluminium-sku-16892000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 19 teeth length 160mm material aluminium SKU: 16891900](https://maedler.in/product/timing-bar-at10-19-teeth-length-160mm-material-aluminium-sku-16891900/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 18 teeth length 160mm material aluminium SKU: 16891800](https://maedler.in/product/timing-bar-at10-18-teeth-length-160mm-material-aluminium-sku-16891800/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 17 teeth length 160mm material aluminium SKU: 16891700](https://maedler.in/product/timing-bar-at10-17-teeth-length-160mm-material-aluminium-sku-16891700/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 16 teeth length 160mm material aluminium SKU: 16891600](https://maedler.in/product/timing-bar-at10-16-teeth-length-160mm-material-aluminium-sku-16891600/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 15 teeth length 160mm material aluminium SKU: 16891500](https://maedler.in/product/timing-bar-at10-15-teeth-length-160mm-material-aluminium-sku-16891500/): Material: Aluminium similar EN AW2017A. - [Polyurethane timing belt AT10 width 100mm 100AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16890001](https://maedler.in/product/polyurethane-timing-belt-at10-width-100mm-100at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16890001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 100mm 100 AT10 open length with tensile members from steel packed 4 x 25mm SKU: 16890000](https://maedler.in/product/polyurethane-timing-belt-at10-width-100mm-100-at10-open-length-with-tensile-members-from-steel-packed-4-x-25mm-sku-16890000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT10 belt width 40mm SKU: 16889901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-40mm-sku-16889901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium AT10 belt width 32mm SKU: 16889900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-32mm-sku-16889900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt AT10 width 50mm 50AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16886001](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-50at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16886001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 50mm 50 AT10 open length with tensile members from steel packed 2 x 25mm SKU: 16886000](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-50-at10-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16886000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT10 width 50mm Lw 1800mm 180 teeth 50 AT10/1800 SKU: 16885600](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1800mm-180-teeth-50-at10-1800-sku-16885600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1700mm 170 teeth 50 AT10/1700 SKU: 16885500](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1700mm-170-teeth-50-at10-1700-sku-16885500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1600mm 160 teeth 50 AT10/1600 SKU: 16885400](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1600mm-160-teeth-50-at10-1600-sku-16885400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1500mm 150 teeth 50 AT10/1500 SKU: 16885300](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1500mm-150-teeth-50-at10-1500-sku-16885300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1400mm 140 teeth 50 AT10/1400 SKU: 16885200](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1400mm-140-teeth-50-at10-1400-sku-16885200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1320mm 132 teeth 50 AT10/1320 SKU: 16885100](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1320mm-132-teeth-50-at10-1320-sku-16885100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1250mm 125 teeth 50 AT10/1250 SKU: 16885000](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1250mm-125-teeth-50-at10-1250-sku-16885000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1210mm 121 teeth 50 AT10/1210 SKU: 16884900](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1210mm-121-teeth-50-at10-1210-sku-16884900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1150mm 115 teeth 50 AT10/1150 SKU: 16884800](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1150mm-115-teeth-50-at10-1150-sku-16884800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1080mm 108 teeth 50 AT10/1080 SKU: 16884700](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1080mm-108-teeth-50-at10-1080-sku-16884700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1050mm 105 teeth 50 AT10/1050 SKU: 16884600](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1050mm-105-teeth-50-at10-1050-sku-16884600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1010mm 101 teeth 50 AT10/1010 SKU: 16884500](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1010mm-101-teeth-50-at10-1010-sku-16884500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 980mm 98 teeth 50 AT10/980 SKU: 16884400](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-980mm-98-teeth-50-at10-980-sku-16884400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 960mm 96 teeth 50 AT10/960 SKU: 16884300](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-960mm-96-teeth-50-at10-960-sku-16884300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 920mm 92 teeth 50 AT10/920 SKU: 16884200](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-920mm-92-teeth-50-at10-920-sku-16884200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 890mm 89 teeth 50 AT10/890 SKU: 16884100](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-890mm-89-teeth-50-at10-890-sku-16884100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm 40AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16884001](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-40at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16884001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 50mm Lw 840mm 84 teeth 50 AT10/840 SKU: 16884000](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-840mm-84-teeth-50-at10-840-sku-16884000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 810mm 81 teeth 50 AT10/810 SKU: 16883900](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-810mm-81-teeth-50-at10-810-sku-16883900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 800mm 80 teeth 50 AT10/800 SKU: 16883800](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-800mm-80-teeth-50-at10-800-sku-16883800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 780mm 78 teeth 50 AT10/780 SKU: 16883700](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-780mm-78-teeth-50-at10-780-sku-16883700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 730mm 73 teeth 50 AT10/730 SKU: 16883600](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-730mm-73-teeth-50-at10-730-sku-16883600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 700mm 70 teeth 50 AT10/700 SKU: 16883500](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-700mm-70-teeth-50-at10-700-sku-16883500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 660mm 66 teeth 50 AT10/660 SKU: 16883400](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-660mm-66-teeth-50-at10-660-sku-16883400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 610mm 61 teeth 50 AT10/610 SKU: 16883300](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-610mm-61-teeth-50-at10-610-sku-16883300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 560mm 56 teeth 50 AT10/560 SKU: 16883200](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-560mm-56-teeth-50-at10-560-sku-16883200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 500mm 50 teeth 50 AT10/500 SKU: 16883100](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-500mm-50-teeth-50-at10-500-sku-16883100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1800mm 180 teeth 40 AT10/1800 SKU: 16883026](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1800mm-180-teeth-40-at10-1800-sku-16883026/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1700mm 170 teeth 40 AT10/1700 SKU: 16883025](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1700mm-170-teeth-40-at10-1700-sku-16883025/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1600mm 160 teeth 40 AT10/1600 SKU: 16883024](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1600mm-160-teeth-40-at10-1600-sku-16883024/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1500mm 150 teeth 40 AT10/1500 SKU: 16883023](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1500mm-150-teeth-40-at10-1500-sku-16883023/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1400mm 140 teeth 40 AT10/1400 SKU: 16883022](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1400mm-140-teeth-40-at10-1400-sku-16883022/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1320mm 132 teeth 40 AT10/1320 SKU: 16883021](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1320mm-132-teeth-40-at10-1320-sku-16883021/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1250mm 125 teeth 40 AT10/1250 SKU: 16883020](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1250mm-125-teeth-40-at10-1250-sku-16883020/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1210mm 121 teeth 40 AT10/1210 SKU: 16883019](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1210mm-121-teeth-40-at10-1210-sku-16883019/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1150mm 115 teeth 40 AT10/1150 SKU: 16883018](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1150mm-115-teeth-40-at10-1150-sku-16883018/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1080mm 108 teeth 40 AT10/1080 SKU: 16883017](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1080mm-108-teeth-40-at10-1080-sku-16883017/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1050mm 105 teeth 40 AT10/1050 SKU: 16883016](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1050mm-105-teeth-40-at10-1050-sku-16883016/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1010mm 101 teeth 40 AT10/1010 SKU: 16883015](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1010mm-101-teeth-40-at10-1010-sku-16883015/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 980mm 98 teeth 40 AT10/980 SKU: 16883014](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-980mm-98-teeth-40-at10-980-sku-16883014/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 960mm 96 teeth 40 AT10/960 SKU: 16883013](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-960mm-96-teeth-40-at10-960-sku-16883013/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 920mm 92 teeth 40 AT10/920 SKU: 16883012](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-920mm-92-teeth-40-at10-920-sku-16883012/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 890mm 89 teeth 40 AT10/890 SKU: 16883011](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-890mm-89-teeth-40-at10-890-sku-16883011/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 840mm 84 teeth 40 AT10/840 SKU: 16883010](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-840mm-84-teeth-40-at10-840-sku-16883010/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 810mm 81 teeth 40 AT10/810 SKU: 16883009](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-810mm-81-teeth-40-at10-810-sku-16883009/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 800mm 80 teeth 40 AT10/800 SKU: 16883008](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-800mm-80-teeth-40-at10-800-sku-16883008/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 780mm 78 teeth 40 AT10/780 SKU: 16883007](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-780mm-78-teeth-40-at10-780-sku-16883007/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 730mm 73 teeth 40 AT10/730 SKU: 16883006](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-730mm-73-teeth-40-at10-730-sku-16883006/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 700mm 70 teeth 40 AT10/700 SKU: 16883005](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-700mm-70-teeth-40-at10-700-sku-16883005/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 660mm 66 teeth 40 AT10/660 SKU: 16883004](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-660mm-66-teeth-40-at10-660-sku-16883004/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 610mm 61 teeth 40 AT10/610 SKU: 16883003](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-610mm-61-teeth-40-at10-610-sku-16883003/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 560mm 56 teeth 40 AT10/560 SKU: 16883002](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-560mm-56-teeth-40-at10-560-sku-16883002/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 500mm 50 teeth 40 AT10/500 SKU: 16883001](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-500mm-50-teeth-40-at10-500-sku-16883001/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm 40 AT10 open length with tensile members from steel SKU: 16883000](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-40-at10-open-length-with-tensile-members-from-steel-sku-16883000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT10 width 32mm Lw 1800mm 180 teeth 32 AT10/1800 SKU: 16882600](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1800mm-180-teeth-32-at10-1800-sku-16882600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1700mm 170 teeth 32 AT10/1700 SKU: 16882500](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1700mm-170-teeth-32-at10-1700-sku-16882500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1600mm 160 teeth 32 AT10/1600 SKU: 16882400](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1600mm-160-teeth-32-at10-1600-sku-16882400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1500mm 150 teeth 32 AT10/1500 SKU: 16882300](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1500mm-150-teeth-32-at10-1500-sku-16882300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [timing bar HTD 3M 60 teeth length 200mm material aluminium SKU: 17096000](https://maedler.in/product/timing-bar-htd-3m-60-teeth-length-200mm-material-aluminium-sku-17096000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 56 teeth length 200mm material aluminium SKU: 17095600](https://maedler.in/product/timing-bar-htd-3m-56-teeth-length-200mm-material-aluminium-sku-17095600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 54 teeth length 200mm material aluminium SKU: 17095400](https://maedler.in/product/timing-bar-htd-3m-54-teeth-length-200mm-material-aluminium-sku-17095400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 52 teeth length 200mm material aluminium SKU: 17095200](https://maedler.in/product/timing-bar-htd-3m-52-teeth-length-200mm-material-aluminium-sku-17095200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 50 teeth length 200mm material aluminium SKU: 17095000](https://maedler.in/product/timing-bar-htd-3m-50-teeth-length-200mm-material-aluminium-sku-17095000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 48 teeth length 200mm material aluminium SKU: 17094800](https://maedler.in/product/timing-bar-htd-3m-48-teeth-length-200mm-material-aluminium-sku-17094800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 46 teeth length 200mm material aluminium SKU: 17094600](https://maedler.in/product/timing-bar-htd-3m-46-teeth-length-200mm-material-aluminium-sku-17094600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 45 teeth length 200mm material aluminium SKU: 17094500](https://maedler.in/product/timing-bar-htd-3m-45-teeth-length-200mm-material-aluminium-sku-17094500/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 44 teeth length 200mm material aluminium SKU: 17094400](https://maedler.in/product/timing-bar-htd-3m-44-teeth-length-200mm-material-aluminium-sku-17094400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 42 teeth length 200mm material aluminium SKU: 17094200](https://maedler.in/product/timing-bar-htd-3m-42-teeth-length-200mm-material-aluminium-sku-17094200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 40 teeth length 200mm material aluminium SKU: 17094000](https://maedler.in/product/timing-bar-htd-3m-40-teeth-length-200mm-material-aluminium-sku-17094000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 39 teeth length 200mm material aluminium SKU: 17093900](https://maedler.in/product/timing-bar-htd-3m-39-teeth-length-200mm-material-aluminium-sku-17093900/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 38 teeth length 200mm material aluminium SKU: 17093800](https://maedler.in/product/timing-bar-htd-3m-38-teeth-length-200mm-material-aluminium-sku-17093800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 37 teeth length 200mm material aluminium SKU: 17093700](https://maedler.in/product/timing-bar-htd-3m-37-teeth-length-200mm-material-aluminium-sku-17093700/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 36 teeth length 200mm material aluminium SKU: 17093600](https://maedler.in/product/timing-bar-htd-3m-36-teeth-length-200mm-material-aluminium-sku-17093600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 35 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093500](https://maedler.in/product/timing-bar-htd-3m-35-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093500/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 34 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093400](https://maedler.in/product/timing-bar-htd-3m-34-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 33 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093300](https://maedler.in/product/timing-bar-htd-3m-33-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093300/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 32 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093200](https://maedler.in/product/timing-bar-htd-3m-32-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 31 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093100](https://maedler.in/product/timing-bar-htd-3m-31-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093100/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 30 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093000](https://maedler.in/product/timing-bar-htd-3m-30-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 29 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092900](https://maedler.in/product/timing-bar-htd-3m-29-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092900/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 28 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092800](https://maedler.in/product/timing-bar-htd-3m-28-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 27 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092700](https://maedler.in/product/timing-bar-htd-3m-27-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092700/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 26 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092600](https://maedler.in/product/timing-bar-htd-3m-26-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 25 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092500](https://maedler.in/product/timing-bar-htd-3m-25-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092500/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 24 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092400](https://maedler.in/product/timing-bar-htd-3m-24-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 23 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092300](https://maedler.in/product/timing-bar-htd-3m-23-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092300/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 22 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092200](https://maedler.in/product/timing-bar-htd-3m-22-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 21 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092100](https://maedler.in/product/timing-bar-htd-3m-21-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092100/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 20 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092000](https://maedler.in/product/timing-bar-htd-3m-20-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 19 teeth toothed length min. 125mm total length 155mm material aluminium SKU: 17091900](https://maedler.in/product/timing-bar-htd-3m-19-teeth-toothed-length-min-125mm-total-length-155mm-material-aluminium-sku-17091900/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 18 teeth toothed length min. 125mm total length 155mm material aluminium SKU: 17091800](https://maedler.in/product/timing-bar-htd-3m-18-teeth-toothed-length-min-125mm-total-length-155mm-material-aluminium-sku-17091800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 17 teeth toothed length min. 125mm total length 155mm material aluminium SKU: 17091700](https://maedler.in/product/timing-bar-htd-3m-17-teeth-toothed-length-min-125mm-total-length-155mm-material-aluminium-sku-17091700/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 16 teeth toothed length min. 125mm total length 155mm material aluminium SKU: 17091600](https://maedler.in/product/timing-bar-htd-3m-16-teeth-toothed-length-min-125mm-total-length-155mm-material-aluminium-sku-17091600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 15 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 17091500](https://maedler.in/product/timing-bar-htd-3m-15-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-17091500/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 14 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 17091400](https://maedler.in/product/timing-bar-htd-3m-14-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-17091400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 13 teeth toothed lenght min. 100mm total length 125mm material aluminium SKU: 17091300](https://maedler.in/product/timing-bar-htd-3m-13-teeth-toothed-lenght-min-100mm-total-length-125mm-material-aluminium-sku-17091300/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 12 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 17091200](https://maedler.in/product/timing-bar-htd-3m-12-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-17091200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 11 teeth toothed length min 75mm total length 100mm material aluminium SKU: 17091100](https://maedler.in/product/timing-bar-htd-3m-11-teeth-toothed-length-min-75mm-total-length-100mm-material-aluminium-sku-17091100/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 10 teeth toothed length min. 75mm total length 100mm material aluminium SKU: 17091000](https://maedler.in/product/timing-bar-htd-3m-10-teeth-toothed-length-min-75mm-total-length-100mm-material-aluminium-sku-17091000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 9 teeth toothed length min. 75mm total length 100mm material aluminium SKU: 17090900](https://maedler.in/product/timing-bar-htd-3m-9-teeth-toothed-length-min-75mm-total-length-100mm-material-aluminium-sku-17090900/): Material: Aluminium similar EN AW2017A. - [Timing belt pulley HTD 3M material aluminium 90 teeth for belt width 15 mm SKU: 17039000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-90-teeth-for-belt-width-15-mm-sku-17039000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 80 teeth for belt width 15 mm SKU: 17038000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-80-teeth-for-belt-width-15-mm-sku-17038000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 72 teeth for belt width 15mm SKU: 17037200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-72-teeth-for-belt-width-15mm-sku-17037200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 60 teeth for belt width 15mm SKU: 17036000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-60-teeth-for-belt-width-15mm-sku-17036000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 52 teeth for belt width 15 mm SKU: 17035200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-52-teeth-for-belt-width-15-mm-sku-17035200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 48 teeth for belt width 15mm SKU: 17034800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-48-teeth-for-belt-width-15mm-sku-17034800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 44 teeth for belt width 15mm SKU: 17034400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-44-teeth-for-belt-width-15mm-sku-17034400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 40 teeth for belt width 15mm SKU: 17034000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-40-teeth-for-belt-width-15mm-sku-17034000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 36 teeth for belt width 15mm SKU: 17033600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-36-teeth-for-belt-width-15mm-sku-17033600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 34 teeth for belt width 15 mm SKU: 17033400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-34-teeth-for-belt-width-15-mm-sku-17033400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 32 teeth for belt width 15mm SKU: 17033200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-32-teeth-for-belt-width-15mm-sku-17033200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 30 teeth for belt width 15mm SKU: 17033000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-30-teeth-for-belt-width-15mm-sku-17033000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 28 teeth for belt width 15mm SKU: 17032800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-28-teeth-for-belt-width-15mm-sku-17032800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 26 teeth for belt width 15mm SKU: 17032600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-26-teeth-for-belt-width-15mm-sku-17032600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 25 teeth for belt width 15 mm SKU: 17032500](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-25-teeth-for-belt-width-15-mm-sku-17032500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 24 teeth for belt width 15mm SKU: 17032400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-24-teeth-for-belt-width-15mm-sku-17032400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 22 teeth for belt width 15mm SKU: 17032200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-22-teeth-for-belt-width-15mm-sku-17032200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 21 teeth for belt width 15mm SKU: 17032100](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-21-teeth-for-belt-width-15mm-sku-17032100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 20 teeth for belt width 15mm SKU: 17032000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-20-teeth-for-belt-width-15mm-sku-17032000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 18 teeth for belt width 15mm SKU: 17031800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-18-teeth-for-belt-width-15mm-sku-17031800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 17 teeth for belt width 15 mm SKU: 17031700](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-17-teeth-for-belt-width-15-mm-sku-17031700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 16 teeth for belt width 15mm SKU: 17031600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-16-teeth-for-belt-width-15mm-sku-17031600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium, 15 teeth for belt width 15mm SKU: 17031500](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-15-teeth-for-belt-width-15mm-sku-17031500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 14 teeth for belt width 15mm SKU: 17031400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-14-teeth-for-belt-width-15mm-sku-17031400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 12 teeth for belt width 15mm SKU: 17031200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-12-teeth-for-belt-width-15mm-sku-17031200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 10 teeth for belt width 15mm SKU: 17031000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-10-teeth-for-belt-width-15mm-sku-17031000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 90 teeth for belt width 9 mm SKU: 17029000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-90-teeth-for-belt-width-9-mm-sku-17029000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 80 teeth for belt width 9 mm SKU: 17028000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-80-teeth-for-belt-width-9-mm-sku-17028000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 72 teeth for belt width 9mm SKU: 17027200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-72-teeth-for-belt-width-9mm-sku-17027200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 60 teeth for belt width 9mm SKU: 17026000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-60-teeth-for-belt-width-9mm-sku-17026000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 52 teeth for belt width 9 mm SKU: 17025200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-52-teeth-for-belt-width-9-mm-sku-17025200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 48 teeth for belt width 9mm SKU: 17024800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-48-teeth-for-belt-width-9mm-sku-17024800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 44 teeth for belt width 9mm SKU: 17024400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-44-teeth-for-belt-width-9mm-sku-17024400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 40 teeth for belt width 9mm SKU: 17024000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-40-teeth-for-belt-width-9mm-sku-17024000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 36 teeth for belt width 9mm SKU: 17023600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-36-teeth-for-belt-width-9mm-sku-17023600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 34 teeth for belt width 9 mm SKU: 17023400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-34-teeth-for-belt-width-9-mm-sku-17023400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 32 teeth for belt width 9mm SKU: 17023200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-32-teeth-for-belt-width-9mm-sku-17023200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 30 teeth for belt width 9mm SKU: 17023000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-30-teeth-for-belt-width-9mm-sku-17023000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 28 teeth for belt width 9mm SKU: 17022800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-28-teeth-for-belt-width-9mm-sku-17022800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 26 teeth for belt width 9mm SKU: 17022600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-26-teeth-for-belt-width-9mm-sku-17022600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 25 teeth for belt width 9 mm SKU: 17022500](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-25-teeth-for-belt-width-9-mm-sku-17022500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 24 teeth for belt width 9mm SKU: 17022400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-24-teeth-for-belt-width-9mm-sku-17022400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 22 teeth for belt width 9mm SKU: 17022200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-22-teeth-for-belt-width-9mm-sku-17022200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 21 teeth for belt width 9mm SKU: 17022100](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-21-teeth-for-belt-width-9mm-sku-17022100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 20 teeth for belt width 9mm SKU: 17022000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-20-teeth-for-belt-width-9mm-sku-17022000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 18 teeth for belt width 9mm SKU: 17021800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-18-teeth-for-belt-width-9mm-sku-17021800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 17 teeth for belt width 9 mm SKU: 17021700](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-17-teeth-for-belt-width-9-mm-sku-17021700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 16 teeth for belt width 9mm SKU: 17021600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-16-teeth-for-belt-width-9mm-sku-17021600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 15 teeth for belt width 9mm SKU: 17021500](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-15-teeth-for-belt-width-9mm-sku-17021500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 14 teeth for belt width 9mm SKU: 17021400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-14-teeth-for-belt-width-9mm-sku-17021400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 12 teeth for belt width 9mm SKU: 17021200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-12-teeth-for-belt-width-9mm-sku-17021200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 10 teeth for belt width 9mm SKU: 17021000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-10-teeth-for-belt-width-9mm-sku-17021000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Polyurethane timing belt AT20 width 100mm 100 AT20 open length with tensile members from steel packed 4 x 25mm SKU: 16980000](https://maedler.in/product/polyurethane-timing-belt-at20-width-100mm-100-at20-open-length-with-tensile-members-from-steel-packed-4-x-25mm-sku-16980000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT20 width 75mm 75 AT20 open length with tensile members from steel packed 3 x 25mm SKU: 16970000](https://maedler.in/product/polyurethane-timing-belt-at20-width-75mm-75-at20-open-length-with-tensile-members-from-steel-packed-3-x-25mm-sku-16970000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT20 width 50mm 50 AT20 open length with tensile members from steel packed 2 x 25mm SKU: 16960000](https://maedler.in/product/polyurethane-timing-belt-at20-width-50mm-50-at20-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16960000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [timing bar AT10 40 teeth length 160mm material 1.4305 SKU: 16899940](https://maedler.in/product/timing-bar-at10-40-teeth-length-160mm-material-1-4305-sku-16899940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 36 teeth length 160mm material 1.4305 SKU: 16899936](https://maedler.in/product/timing-bar-at10-36-teeth-length-160mm-material-1-4305-sku-16899936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 32 teeth length 160mm material 1.4305 SKU: 16899932](https://maedler.in/product/timing-bar-at10-32-teeth-length-160mm-material-1-4305-sku-16899932/): Material: Stainless steel 1.4305 (AISI 303). - [Neoprene timing belt HTD 3M width 15mm Lw 1263mm 421 teeth SKU: 17138400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1263mm-421-teeth-sku-17138400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 1125mm 375 teeth SKU: 17138000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1125mm-375-teeth-sku-17138000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 1062mm 354 teeth SKU: 17137800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1062mm-354-teeth-sku-17137800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 945mm 315 teeth SKU: 17137500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-945mm-315-teeth-sku-17137500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 882mm 294 teeth SKU: 17137300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-882mm-294-teeth-sku-17137300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 711mm 237 teeth SKU: 17137000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-711mm-237-teeth-sku-17137000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 669mm 223 teeth SKU: 17136700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-669mm-223-teeth-sku-17136700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 633mm 211 teeth SKU: 17136400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-633mm-211-teeth-sku-17136400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 606mm 202 teeth SKU: 17136200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-606mm-202-teeth-sku-17136200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 597mm 199 teeth SKU: 17136100](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-597mm-199-teeth-sku-17136100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 564mm 188 teeth SKU: 17135900](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-564mm-188-teeth-sku-17135900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 537mm 179 teeth SKU: 17135700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-537mm-179-teeth-sku-17135700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 531mm 177 teeth SKU: 17135600](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-531mm-177-teeth-sku-17135600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 513mm 171 teeth SKU: 17135400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-513mm-171-teeth-sku-17135400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 501mm 167 teeth SKU: 17135200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-501mm-167-teeth-sku-17135200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 486mm 162 teeth SKU: 17135000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-486mm-162-teeth-sku-17135000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 474mm 158 teeth SKU: 17134900](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-474mm-158-teeth-sku-17134900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 447mm 149 teeth SKU: 17134700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-447mm-149-teeth-sku-17134700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 420mm 140 teeth SKU: 17134500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-420mm-140-teeth-sku-17134500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 390mm 130 teeth SKU: 17134300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-390mm-130-teeth-sku-17134300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 384mm 128 teeth SKU: 17134200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-384mm-128-teeth-sku-17134200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 363mm 121 teeth SKU: 17134000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-363mm-121-teeth-sku-17134000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 339mm 113 teeth SKU: 17133800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-339mm-113-teeth-sku-17133800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 336mm 112 teeth SKU: 17133700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-336mm-112-teeth-sku-17133700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 318mm 106 teeth SKU: 17133500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-318mm-106-teeth-sku-17133500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 312mm 104 teeth SKU: 17133400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-312mm-104-teeth-sku-17133400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 300mm 100 teeth SKU: 17133300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-300mm-100-teeth-sku-17133300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 285mm 95 teeth SKU: 17133200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-285mm-95-teeth-sku-17133200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 267mm 89 teeth SKU: 17133000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-267mm-89-teeth-sku-17133000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 255mm 85 teeth SKU: 17132800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-255mm-85-teeth-sku-17132800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 252mm 84 teeth SKU: 17132700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-252mm-84-teeth-sku-17132700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 225mm 75 teeth SKU: 17132400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-225mm-75-teeth-sku-17132400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 216mm 72 teeth SKU: 17132200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-216mm-72-teeth-sku-17132200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 213mm 71 teeth SKU: 17132100](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-213mm-71-teeth-sku-17132100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 210mm 70 teeth SKU: 17132000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-210mm-70-teeth-sku-17132000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 201mm 67 teeth SKU: 17131800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-201mm-67-teeth-sku-17131800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 177mm 59 teeth SKU: 17131600](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-177mm-59-teeth-sku-17131600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 168mm 56 teeth SKU: 17131400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-168mm-56-teeth-sku-17131400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 159mm 53 teeth SKU: 17131200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-159mm-53-teeth-sku-17131200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 150mm 50 teeth SKU: 17131000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-150mm-50-teeth-sku-17131000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 144mm 48 teeth SKU: 17130800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-144mm-48-teeth-sku-17130800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 111mm 37 teeth SKU: 17130500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-111mm-37-teeth-sku-17130500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm 3M-15 open length SKU: 17130000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-3m-15-open-length-sku-17130000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 3M belt width 9mm SKU: 17119900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-3m-belt-width-9mm-sku-17119900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 3M width 9mm Lw 1569mm 523 teeth SKU: 17119200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1569mm-523-teeth-sku-17119200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1530mm 510 teeth SKU: 17119000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1530mm-510-teeth-sku-17119000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1500mm 500 teeth SKU: 17118800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1500mm-500-teeth-sku-17118800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1263mm 421 teeth SKU: 17118400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1263mm-421-teeth-sku-17118400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1125mm 375 teeth SKU: 17118000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1125mm-375-teeth-sku-17118000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1062mm 354 teeth SKU: 17117800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1062mm-354-teeth-sku-17117800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 945mm 315 teeth SKU: 17117500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-945mm-315-teeth-sku-17117500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 882mm 294 teeth SKU: 17117300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-882mm-294-teeth-sku-17117300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 711mm 237 teeth SKU: 17117000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-711mm-237-teeth-sku-17117000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 669mm 223 teeth SKU: 17116700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-669mm-223-teeth-sku-17116700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 633mm 211 teeth SKU: 17116400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-633mm-211-teeth-sku-17116400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 606mm 202 teeth SKU: 17116200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-606mm-202-teeth-sku-17116200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 597mm 199 teeth SKU: 17116100](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-597mm-199-teeth-sku-17116100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 564mm 188 teeth SKU: 17115900](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-564mm-188-teeth-sku-17115900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 537mm 179 teeth SKU: 17115700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-537mm-179-teeth-sku-17115700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 531mm 177 teeth SKU: 17115600](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-531mm-177-teeth-sku-17115600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 513mm 171 teeth SKU: 17115400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-513mm-171-teeth-sku-17115400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 501mm 167 teeth SKU: 17115200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-501mm-167-teeth-sku-17115200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 486mm 162 teeth SKU: 17115000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-486mm-162-teeth-sku-17115000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 474mm 158 teeth SKU: 17114900](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-474mm-158-teeth-sku-17114900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 447mm 149 teeth SKU: 17114700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-447mm-149-teeth-sku-17114700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 420mm 140 teeth SKU: 17114500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-420mm-140-teeth-sku-17114500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 390mm 130 teeth SKU: 17114300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-390mm-130-teeth-sku-17114300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 384mm 128 teeth SKU: 17114200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-384mm-128-teeth-sku-17114200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 363mm 121 teeth SKU: 17114000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-363mm-121-teeth-sku-17114000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 339mm 113 teeth SKU: 17113800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-339mm-113-teeth-sku-17113800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 336mm 112 teeth SKU: 17113700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-336mm-112-teeth-sku-17113700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 318mm 106 teeth SKU: 17113500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-318mm-106-teeth-sku-17113500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 312mm 104 teeth SKU: 17113400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-312mm-104-teeth-sku-17113400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 300mm 100 teeth SKU: 17113300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-300mm-100-teeth-sku-17113300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 285mm 95 teeth SKU: 17113200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-285mm-95-teeth-sku-17113200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 267mm 89 teeth SKU: 17113000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-267mm-89-teeth-sku-17113000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 255mm 85 teeth SKU: 17112800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-255mm-85-teeth-sku-17112800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 252mm 84 teeth SKU: 17112700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-252mm-84-teeth-sku-17112700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 225mm 75 teeth SKU: 17112400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-225mm-75-teeth-sku-17112400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 216mm 72 teeth SKU: 17112200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-216mm-72-teeth-sku-17112200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 213mm 71 teeth SKU: 17112100](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-213mm-71-teeth-sku-17112100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 210mm 70 teeth SKU: 17112000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-210mm-70-teeth-sku-17112000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 201mm 67 teeth SKU: 17111800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-201mm-67-teeth-sku-17111800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 177mm 59 teeth SKU: 17111600](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-177mm-59-teeth-sku-17111600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 168mm 56 teeth SKU: 17111400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-168mm-56-teeth-sku-17111400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 159mm 53 teeth SKU: 17111200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-159mm-53-teeth-sku-17111200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 150mm 50 teeth SKU: 17111000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-150mm-50-teeth-sku-17111000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 144mm 48 teeth SKU: 17110800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-144mm-48-teeth-sku-17110800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 111mm 37 teeth SKU: 17110500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-111mm-37-teeth-sku-17110500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm 3M-09 open length SKU: 17110000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-3m-09-open-length-sku-17110000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [timing bar HTD 3M 112 teeth length 200mm material aluminium SKU: 17099200](https://maedler.in/product/timing-bar-htd-3m-112-teeth-length-200mm-material-aluminium-sku-17099200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 96 teeth length 200mm material aluminium SKU: 17099100](https://maedler.in/product/timing-bar-htd-3m-96-teeth-length-200mm-material-aluminium-sku-17099100/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 90 teeth length 200mm material aluminium SKU: 17099000](https://maedler.in/product/timing-bar-htd-3m-90-teeth-length-200mm-material-aluminium-sku-17099000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 80 teeth length 200mm material aluminium SKU: 17098000](https://maedler.in/product/timing-bar-htd-3m-80-teeth-length-200mm-material-aluminium-sku-17098000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 72 teeth length 200mm material aluminium SKU: 17097200](https://maedler.in/product/timing-bar-htd-3m-72-teeth-length-200mm-material-aluminium-sku-17097200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 70 teeth length 200mm material aluminium SKU: 17097000](https://maedler.in/product/timing-bar-htd-3m-70-teeth-length-200mm-material-aluminium-sku-17097000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 68 teeth length 200mm material aluminium SKU: 17096800](https://maedler.in/product/timing-bar-htd-3m-68-teeth-length-200mm-material-aluminium-sku-17096800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 66 teeth length 200mm material aluminium SKU: 17096600](https://maedler.in/product/timing-bar-htd-3m-66-teeth-length-200mm-material-aluminium-sku-17096600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 64 teeth length 200mm material aluminium SKU: 17096400](https://maedler.in/product/timing-bar-htd-3m-64-teeth-length-200mm-material-aluminium-sku-17096400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 62 teeth length 200mm material aluminium SKU: 17096200](https://maedler.in/product/timing-bar-htd-3m-62-teeth-length-200mm-material-aluminium-sku-17096200/): Material: Aluminium similar EN AW2017A. - [Timing belt pulley HTD-5M 52 teeth for belt width 25mm for taper-bush 1210 SKU: 17277452](https://maedler.in/product/timing-belt-pulley-htd-5m-52-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277452/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 48 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277448](https://maedler.in/product/timing-belt-pulley-htd-5m-48-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277448/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 44 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277444](https://maedler.in/product/timing-belt-pulley-htd-5m-44-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277444/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 40 teeth, for belt width 25mm, for taper-bush 1108 SKU: 17277440](https://maedler.in/product/timing-belt-pulley-htd-5m-40-teeth-for-belt-width-25mm-for-taper-bush-1108-sku-17277440/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 38 teeth, for belt width 25mm, for taper-bush 1108 SKU: 17277438](https://maedler.in/product/timing-belt-pulley-htd-5m-38-teeth-for-belt-width-25mm-for-taper-bush-1108-sku-17277438/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 36 teeth, for belt width 25mm, for taper-bush 1108 SKU: 17277436](https://maedler.in/product/timing-belt-pulley-htd-5m-36-teeth-for-belt-width-25mm-for-taper-bush-1108-sku-17277436/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 34 teeth, for belt width 25mm, for taper-bush 1008 SKU: 17277434](https://maedler.in/product/timing-belt-pulley-htd-5m-34-teeth-for-belt-width-25mm-for-taper-bush-1008-sku-17277434/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 112 teeth, for belt width 15mm, for taper-bush 2012 SKU: 17277394](https://maedler.in/product/timing-belt-pulley-htd-5m-112-teeth-for-belt-width-15mm-for-taper-bush-2012-sku-17277394/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 90 teeth, for belt width 15mm, for taper-bush 1610 SKU: 17277390](https://maedler.in/product/timing-belt-pulley-htd-5m-90-teeth-for-belt-width-15mm-for-taper-bush-1610-sku-17277390/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 80 teeth, for belt width 15mm, for taper-bush 1610 SKU: 17277380](https://maedler.in/product/timing-belt-pulley-htd-5m-80-teeth-for-belt-width-15mm-for-taper-bush-1610-sku-17277380/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 72 teeth, for belt width 15mm, for taper-bush 1610 SKU: 17277372](https://maedler.in/product/timing-belt-pulley-htd-5m-72-teeth-for-belt-width-15mm-for-taper-bush-1610-sku-17277372/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 64 teeth, for belt width 15mm, for taper-bush 1210 SKU: 17277364](https://maedler.in/product/timing-belt-pulley-htd-5m-64-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277364/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 60 teeth, for belt width 15mm, for taper-bush 1210 SKU: 17277360](https://maedler.in/product/timing-belt-pulley-htd-5m-60-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277360/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 56 teeth, for belt width 15mm, for taper-bush 1210 SKU: 17277356](https://maedler.in/product/timing-belt-pulley-htd-5m-56-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277356/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD-5M 52 teeth for belt width 15mm for taper-bush 1210 SKU: 17277352](https://maedler.in/product/timing-belt-pulley-htd-5m-52-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277352/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 48 teeth, for belt width 15mm, for taper-bush 1210 SKU: 17277348](https://maedler.in/product/timing-belt-pulley-htd-5m-48-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277348/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 44 teeth, for belt width 15mm, for taper-bush 1108 SKU: 17277344](https://maedler.in/product/timing-belt-pulley-htd-5m-44-teeth-for-belt-width-15mm-for-taper-bush-1108-sku-17277344/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 40 teeth, for belt width 15mm, for taper-bush 1108 SKU: 17277340](https://maedler.in/product/timing-belt-pulley-htd-5m-40-teeth-for-belt-width-15mm-for-taper-bush-1108-sku-17277340/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 38 teeth, for belt width 15mm, for taper-bush 1108 SKU: 17277338](https://maedler.in/product/timing-belt-pulley-htd-5m-38-teeth-for-belt-width-15mm-for-taper-bush-1108-sku-17277338/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 36 teeth, for belt width 15mm, for taper-bush 1108 SKU: 17277336](https://maedler.in/product/timing-belt-pulley-htd-5m-36-teeth-for-belt-width-15mm-for-taper-bush-1108-sku-17277336/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 34 teeth, for belt width 15mm, for taper-bush 1008 SKU: 17277334](https://maedler.in/product/timing-belt-pulley-htd-5m-34-teeth-for-belt-width-15mm-for-taper-bush-1008-sku-17277334/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 5M material aluminium 90 teeth for belt width 25 mm SKU: 17249000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-90-teeth-for-belt-width-25-mm-sku-17249000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 80 teeth for belt width 25 mm SKU: 17248000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-80-teeth-for-belt-width-25-mm-sku-17248000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 72 teeth for belt width 25mm SKU: 17247200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-72-teeth-for-belt-width-25mm-sku-17247200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 60 teeth for belt width 25mm SKU: 17246000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-60-teeth-for-belt-width-25mm-sku-17246000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 52 teeth for belt width 25 mm SKU: 17245200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-52-teeth-for-belt-width-25-mm-sku-17245200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 48 teeth for belt width 25mm SKU: 17244800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-48-teeth-for-belt-width-25mm-sku-17244800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 44 teeth for belt width 25mm SKU: 17244400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-44-teeth-for-belt-width-25mm-sku-17244400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 40 teeth for belt width 25mm SKU: 17244000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-40-teeth-for-belt-width-25mm-sku-17244000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 36 teeth for belt width 25mm SKU: 17243600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-36-teeth-for-belt-width-25mm-sku-17243600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 34 teeth for belt width 25 mm SKU: 17243400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-34-teeth-for-belt-width-25-mm-sku-17243400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 32 teeth for belt width 25mm SKU: 17243200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-32-teeth-for-belt-width-25mm-sku-17243200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 30 teeth for belt width 25mm SKU: 17243000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-30-teeth-for-belt-width-25mm-sku-17243000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 28 teeth for belt width 25mm SKU: 17242800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-28-teeth-for-belt-width-25mm-sku-17242800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 26 teeth for belt width 25mm SKU: 17242600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-26-teeth-for-belt-width-25mm-sku-17242600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 25 teeth for belt width 25 mm SKU: 17242500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-25-teeth-for-belt-width-25-mm-sku-17242500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 24 teeth for belt width 25mm SKU: 17242400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-24-teeth-for-belt-width-25mm-sku-17242400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 22 teeth for belt width 25mm SKU: 17242200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-22-teeth-for-belt-width-25mm-sku-17242200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 21 teeth for belt width 25mm SKU: 17242100](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-21-teeth-for-belt-width-25mm-sku-17242100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 20 teeth for belt width 25mm SKU: 17242000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-20-teeth-for-belt-width-25mm-sku-17242000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 18 teeth for belt width 25mm SKU: 17241800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-18-teeth-for-belt-width-25mm-sku-17241800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 17 teeth for belt width 25 mm SKU: 17241700](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-17-teeth-for-belt-width-25-mm-sku-17241700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 16 teeth for belt width 25mm SKU: 17241600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-16-teeth-for-belt-width-25mm-sku-17241600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 15 teeth for belt width 25mm SKU: 17241500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-15-teeth-for-belt-width-25mm-sku-17241500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 14 teeth for belt width 25mm SKU: 17241400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-14-teeth-for-belt-width-25mm-sku-17241400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 12 teeth for belt width 25mm SKU: 17241200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-12-teeth-for-belt-width-25mm-sku-17241200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 90 teeth for belt width 15 mm SKU: 17239000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-90-teeth-for-belt-width-15-mm-sku-17239000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 80 teeth for belt width 15 mm SKU: 17238000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-80-teeth-for-belt-width-15-mm-sku-17238000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 72 teeth for belt width 15mm SKU: 17237200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-72-teeth-for-belt-width-15mm-sku-17237200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 60 teeth for belt width 15mm SKU: 17236000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-60-teeth-for-belt-width-15mm-sku-17236000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 52 teeth for belt width 15 mm SKU: 17235200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-52-teeth-for-belt-width-15-mm-sku-17235200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 48 teeth for belt width 15mm SKU: 17234800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-48-teeth-for-belt-width-15mm-sku-17234800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 44 teeth for belt width 15mm SKU: 17234400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-44-teeth-for-belt-width-15mm-sku-17234400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 40 teeth for belt width 15mm SKU: 17234000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-40-teeth-for-belt-width-15mm-sku-17234000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 36 teeth for belt width 15mm SKU: 17233600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-36-teeth-for-belt-width-15mm-sku-17233600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 34 teeth for belt width 15 mm SKU: 17233400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-34-teeth-for-belt-width-15-mm-sku-17233400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 32 teeth for belt width 15mm SKU: 17233200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-32-teeth-for-belt-width-15mm-sku-17233200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 30 teeth for belt width 15mm SKU: 17233000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-30-teeth-for-belt-width-15mm-sku-17233000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 28 teeth for belt width 15mm SKU: 17232800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-28-teeth-for-belt-width-15mm-sku-17232800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 26 teeth for belt width 15mm SKU: 17232600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-26-teeth-for-belt-width-15mm-sku-17232600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 25 teeth for belt width 15 mm SKU: 17232500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-25-teeth-for-belt-width-15-mm-sku-17232500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 24 teeth for belt width 15mm SKU: 17232400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-24-teeth-for-belt-width-15mm-sku-17232400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 22 teeth for belt width 15mm SKU: 17232200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-22-teeth-for-belt-width-15mm-sku-17232200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 21 teeth for belt width 15mm SKU: 17232100](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-21-teeth-for-belt-width-15mm-sku-17232100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 20 teeth for belt width 15mm SKU: 17232000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-20-teeth-for-belt-width-15mm-sku-17232000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 18 teeth for belt width 15mm SKU: 17231800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-18-teeth-for-belt-width-15mm-sku-17231800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 17 teeth for belt width 15 mm SKU: 17231700](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-17-teeth-for-belt-width-15-mm-sku-17231700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 16 teeth for belt width 15mm SKU: 17231600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-16-teeth-for-belt-width-15mm-sku-17231600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 15 teeth for belt width 15mm SKU: 17231500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-15-teeth-for-belt-width-15mm-sku-17231500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 14 teeth for belt width 15mm SKU: 17231400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-14-teeth-for-belt-width-15mm-sku-17231400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 12 teeth for belt width 15mm SKU: 17231200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-12-teeth-for-belt-width-15mm-sku-17231200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 90 teeth for belt width 9 mm SKU: 17229000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-90-teeth-for-belt-width-9-mm-sku-17229000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 80 teeth for belt width 9 mm SKU: 17228000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-80-teeth-for-belt-width-9-mm-sku-17228000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 72 teeth for belt width 9mm SKU: 17227200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-72-teeth-for-belt-width-9mm-sku-17227200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 60 teeth for belt width 9mm SKU: 17226000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-60-teeth-for-belt-width-9mm-sku-17226000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 52 teeth for belt width 9 mm SKU: 17225200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-52-teeth-for-belt-width-9-mm-sku-17225200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 48 teeth for belt width 9mm SKU: 17224800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-48-teeth-for-belt-width-9mm-sku-17224800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 44 teeth for belt width 9mm SKU: 17224400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-44-teeth-for-belt-width-9mm-sku-17224400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 40 teeth for belt width 9mm SKU: 17224000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-40-teeth-for-belt-width-9mm-sku-17224000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 36 teeth for belt width 9mm SKU: 17223600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-36-teeth-for-belt-width-9mm-sku-17223600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 34 teeth for belt width 9 mm SKU: 17223400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-34-teeth-for-belt-width-9-mm-sku-17223400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 32 teeth for belt width 9mm SKU: 17223200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-32-teeth-for-belt-width-9mm-sku-17223200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 30 teeth for belt width 9mm SKU: 17223000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-30-teeth-for-belt-width-9mm-sku-17223000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 28 teeth for belt width 9mm SKU: 17222800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-28-teeth-for-belt-width-9mm-sku-17222800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 26 teeth for belt width 9mm SKU: 17222600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-26-teeth-for-belt-width-9mm-sku-17222600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 25 teeth for belt width 9 mm SKU: 17222500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-25-teeth-for-belt-width-9-mm-sku-17222500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 24 teeth for belt width 9mm SKU: 17222400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-24-teeth-for-belt-width-9mm-sku-17222400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 22 teeth for belt width 9mm SKU: 17222200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-22-teeth-for-belt-width-9mm-sku-17222200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 21 teeth for belt width 9mm SKU: 17222100](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-21-teeth-for-belt-width-9mm-sku-17222100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 20 teeth for belt width 9mm SKU: 17222000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-20-teeth-for-belt-width-9mm-sku-17222000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 18 teeth for belt width 9mm SKU: 17221800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-18-teeth-for-belt-width-9mm-sku-17221800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 17 teeth for belt width 9 mm SKU: 17221700](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-17-teeth-for-belt-width-9-mm-sku-17221700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 16 teeth for belt width 9mm SKU: 17221600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-16-teeth-for-belt-width-9mm-sku-17221600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 15 teeth for belt width 9mm SKU: 17221500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-15-teeth-for-belt-width-9mm-sku-17221500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 14 teeth for belt width 9mm SKU: 17221400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-14-teeth-for-belt-width-9mm-sku-17221400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 12 teeth for belt width 9mm SKU: 17221200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-12-teeth-for-belt-width-9mm-sku-17221200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Fixing plate for timing belts material aluminium HTD 3M belt width 15mm SKU: 17139900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-3m-belt-width-15mm-sku-17139900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 3M width 15mm Lw 1569mm 523 teeth SKU: 17139200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1569mm-523-teeth-sku-17139200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 1530mm 510 teeth SKU: 17139000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1530mm-510-teeth-sku-17139000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 1500mm 500 teeth SKU: 17138800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1500mm-500-teeth-sku-17138800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 425mm 85 teeth SKU: 17312000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-425mm-85-teeth-sku-17312000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 400mm 80 teeth SKU: 17311800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-400mm-80-teeth-sku-17311800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 375mm 75 teeth SKU: 17311600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-375mm-75-teeth-sku-17311600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 350mm 70 teeth SKU: 17311400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-350mm-70-teeth-sku-17311400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 330mm 66 teeth SKU: 17311200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-330mm-66-teeth-sku-17311200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 10mm 5M-10 open length SKU: 17310000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-10mm-5m-10-open-length-sku-17310000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [timing bar HTD 5M 60 teeth length 200mm material 1.4305 SKU: 17299960](https://maedler.in/product/timing-bar-htd-5m-60-teeth-length-200mm-material-1-4305-sku-17299960/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 48 teeth length 200mm material 1.4305 SKU: 17299948](https://maedler.in/product/timing-bar-htd-5m-48-teeth-length-200mm-material-1-4305-sku-17299948/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 40 teeth length 200mm material 1.4305 SKU: 17299940](https://maedler.in/product/timing-bar-htd-5m-40-teeth-length-200mm-material-1-4305-sku-17299940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 36 teeth length 200mm material 1.4305 SKU: 17299936](https://maedler.in/product/timing-bar-htd-5m-36-teeth-length-200mm-material-1-4305-sku-17299936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 32 teeth length 200mm material 1.4305 SKU: 17299932](https://maedler.in/product/timing-bar-htd-5m-32-teeth-length-200mm-material-1-4305-sku-17299932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 30 teeth length 200mm material 1.4305 SKU: 17299930](https://maedler.in/product/timing-bar-htd-5m-30-teeth-length-200mm-material-1-4305-sku-17299930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 25 teeth length 200mm material 1.4305 SKU: 17299925](https://maedler.in/product/timing-bar-htd-5m-25-teeth-length-200mm-material-1-4305-sku-17299925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 24 teeth length 200mm material 1.4305 SKU: 17299924](https://maedler.in/product/timing-bar-htd-5m-24-teeth-length-200mm-material-1-4305-sku-17299924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 20 teeth length 200mm material 1.4305 SKU: 17299920](https://maedler.in/product/timing-bar-htd-5m-20-teeth-length-200mm-material-1-4305-sku-17299920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 18 teeth length 200mm material 1.4305 SKU: 17299918](https://maedler.in/product/timing-bar-htd-5m-18-teeth-length-200mm-material-1-4305-sku-17299918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 16 teeth toothed length min. 175mm total length 200mm material 1.4305 SKU: 17299916](https://maedler.in/product/timing-bar-htd-5m-16-teeth-toothed-length-min-175mm-total-length-200mm-material-1-4305-sku-17299916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 15 teeth toothed length min. 175mm total length 200mm material 1.4305 SKU: 17299915](https://maedler.in/product/timing-bar-htd-5m-15-teeth-toothed-length-min-175mm-total-length-200mm-material-1-4305-sku-17299915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 12 teeth length 160mm material 1.4305 SKU: 17299912](https://maedler.in/product/timing-bar-htd-5m-12-teeth-length-160mm-material-1-4305-sku-17299912/): Material: Stainless steel 1.4305 (AISI 303). - [Timing bar HTD 5M 112 teeth length 200mm material steel SKU: 17299201](https://maedler.in/product/timing-bar-htd-5m-112-teeth-length-200mm-material-steel-sku-17299201/): Material: Steel. - [Timing bar HTD 5M 112 teeth length 200mm material aluminium SKU: 17299200](https://maedler.in/product/timing-bar-htd-5m-112-teeth-length-200mm-material-aluminium-sku-17299200/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 96 teeth length 200mm material steel SKU: 17299101](https://maedler.in/product/timing-bar-htd-5m-96-teeth-length-200mm-material-steel-sku-17299101/): Material: Steel. - [Timing bar HTD 5M 96 teeth length 200mm material aluminium SKU: 17299100](https://maedler.in/product/timing-bar-htd-5m-96-teeth-length-200mm-material-aluminium-sku-17299100/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 90 teeth length 200mm material steel SKU: 17299001](https://maedler.in/product/timing-bar-htd-5m-90-teeth-length-200mm-material-steel-sku-17299001/): Material: Steel. - [Timing bar HTD 5M 90 teeth length 200mm material aluminium SKU: 17299000](https://maedler.in/product/timing-bar-htd-5m-90-teeth-length-200mm-material-aluminium-sku-17299000/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 80 teeth length 200mm material steel SKU: 17298001](https://maedler.in/product/timing-bar-htd-5m-80-teeth-length-200mm-material-steel-sku-17298001/): Material: Steel. - [Timing bar HTD 5M 80 teeth length 200mm material aluminium SKU: 17298000](https://maedler.in/product/timing-bar-htd-5m-80-teeth-length-200mm-material-aluminium-sku-17298000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 72 teeth length 200mm material steel SKU: 17297201](https://maedler.in/product/timing-bar-htd-5m-72-teeth-length-200mm-material-steel-sku-17297201/): Material: Steel. - [timing bar HTD 5M 72 teeth length 200mm material aluminium SKU: 17297200](https://maedler.in/product/timing-bar-htd-5m-72-teeth-length-200mm-material-aluminium-sku-17297200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 60 teeth length 200mm material steel SKU: 17296001](https://maedler.in/product/timing-bar-htd-5m-60-teeth-length-200mm-material-steel-sku-17296001/): Material: Steel. - [timing bar HTD 5M 60 teeth length 200mm material aluminium SKU: 17296000](https://maedler.in/product/timing-bar-htd-5m-60-teeth-length-200mm-material-aluminium-sku-17296000/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 56 teeth length 200mm material steel SKU: 17295601](https://maedler.in/product/timing-bar-htd-5m-56-teeth-length-200mm-material-steel-sku-17295601/): Material: Steel. - [Timing bar HTD 5M 56 teeth length 200mm material aluminium SKU: 17295600](https://maedler.in/product/timing-bar-htd-5m-56-teeth-length-200mm-material-aluminium-sku-17295600/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 52 teeth length 200mm material steel SKU: 17295201](https://maedler.in/product/timing-bar-htd-5m-52-teeth-length-200mm-material-steel-sku-17295201/): Material: Steel. - [Timing bar HTD 5M 52 teeth length 200mm material aluminium SKU: 17295200](https://maedler.in/product/timing-bar-htd-5m-52-teeth-length-200mm-material-aluminium-sku-17295200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 50 teeth length 200mm material steel SKU: 17295001](https://maedler.in/product/timing-bar-htd-5m-50-teeth-length-200mm-material-steel-sku-17295001/): Material: Steel. - [timing bar HTD 5M 50 teeth length 200mm material aluminium SKU: 17295000](https://maedler.in/product/timing-bar-htd-5m-50-teeth-length-200mm-material-aluminium-sku-17295000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 48 teeth length 200mm material steel SKU: 17294801](https://maedler.in/product/timing-bar-htd-5m-48-teeth-length-200mm-material-steel-sku-17294801/): Material: Steel. - [timing bar HTD 5M 48 teeth length 200mm material aluminium SKU: 17294800](https://maedler.in/product/timing-bar-htd-5m-48-teeth-length-200mm-material-aluminium-sku-17294800/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 46 teeth length 200mm material steel SKU: 17294601](https://maedler.in/product/timing-bar-htd-5m-46-teeth-length-200mm-material-steel-sku-17294601/): Material: Steel. - [Timing bar HTD 5M 46 teeth length 200mm material aluminium SKU: 17294600](https://maedler.in/product/timing-bar-htd-5m-46-teeth-length-200mm-material-aluminium-sku-17294600/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 45 teeth length 200mm material steel SKU: 17294501](https://maedler.in/product/timing-bar-htd-5m-45-teeth-length-200mm-material-steel-sku-17294501/): Material: Steel. - [timing bar HTD 5M 45 teeth length 200mm material aluminium SKU: 17294500](https://maedler.in/product/timing-bar-htd-5m-45-teeth-length-200mm-material-aluminium-sku-17294500/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 44 teeth length 200mm material steel SKU: 17294401](https://maedler.in/product/timing-bar-htd-5m-44-teeth-length-200mm-material-steel-sku-17294401/): Material: Steel. - [timing bar HTD 5M 44 teeth length 200mm material aluminium SKU: 17294400](https://maedler.in/product/timing-bar-htd-5m-44-teeth-length-200mm-material-aluminium-sku-17294400/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 42 teeth length 200mm material steel SKU: 17294201](https://maedler.in/product/timing-bar-htd-5m-42-teeth-length-200mm-material-steel-sku-17294201/): Material: Steel. - [timing bar HTD 5M 42 teeth length 200mm material aluminium SKU: 17294200](https://maedler.in/product/timing-bar-htd-5m-42-teeth-length-200mm-material-aluminium-sku-17294200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 40 teeth length 200mm material steel SKU: 17294001](https://maedler.in/product/timing-bar-htd-5m-40-teeth-length-200mm-material-steel-sku-17294001/): Material: Steel. - [timing bar HTD 5M 40 teeth length 200mm material aluminium SKU: 17294000](https://maedler.in/product/timing-bar-htd-5m-40-teeth-length-200mm-material-aluminium-sku-17294000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 38 teeth length 200mm material steel SKU: 17293801](https://maedler.in/product/timing-bar-htd-5m-38-teeth-length-200mm-material-steel-sku-17293801/): Material: Steel. - [timing bar HTD 5M 38 teeth length 200mm material aluminium SKU: 17293800](https://maedler.in/product/timing-bar-htd-5m-38-teeth-length-200mm-material-aluminium-sku-17293800/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 36 teeth length 200mm material steel SKU: 17293601](https://maedler.in/product/timing-bar-htd-5m-36-teeth-length-200mm-material-steel-sku-17293601/): Material: Steel. - [timing bar HTD 5M 36 teeth length 200mm material aluminium SKU: 17293600](https://maedler.in/product/timing-bar-htd-5m-36-teeth-length-200mm-material-aluminium-sku-17293600/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 34 teeth length 200mm material steel SKU: 17293401](https://maedler.in/product/timing-bar-htd-5m-34-teeth-length-200mm-material-steel-sku-17293401/): Material: Steel. - [timing bar HTD 5M 34 teeth length 200mm material aluminium SKU: 17293400](https://maedler.in/product/timing-bar-htd-5m-34-teeth-length-200mm-material-aluminium-sku-17293400/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 32 teeth length 200mm material steel SKU: 17293201](https://maedler.in/product/timing-bar-htd-5m-32-teeth-length-200mm-material-steel-sku-17293201/): Material: Steel. - [timing bar HTD 5M 32 teeth length 200mm material aluminium SKU: 17293200](https://maedler.in/product/timing-bar-htd-5m-32-teeth-length-200mm-material-aluminium-sku-17293200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 30 teeth length 200mm material steel SKU: 17293001](https://maedler.in/product/timing-bar-htd-5m-30-teeth-length-200mm-material-steel-sku-17293001/): Material: Steel. - [timing bar HTD 5M 30 teeth length 200mm material aluminium SKU: 17293000](https://maedler.in/product/timing-bar-htd-5m-30-teeth-length-200mm-material-aluminium-sku-17293000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 28 teeth length 200mm material steel SKU: 17292801](https://maedler.in/product/timing-bar-htd-5m-28-teeth-length-200mm-material-steel-sku-17292801/): Material: Steel. - [timing bar HTD 5M 28 teeth length 200mm material aluminium SKU: 17292800](https://maedler.in/product/timing-bar-htd-5m-28-teeth-length-200mm-material-aluminium-sku-17292800/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 27 teeth length 200mm material steel SKU: 17292701](https://maedler.in/product/timing-bar-htd-5m-27-teeth-length-200mm-material-steel-sku-17292701/): Material: Steel. - [timing bar HTD 5M 27 teeth length 200mm material aluminium SKU: 17292700](https://maedler.in/product/timing-bar-htd-5m-27-teeth-length-200mm-material-aluminium-sku-17292700/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 26 teeth length 200mm material steel SKU: 17292601](https://maedler.in/product/timing-bar-htd-5m-26-teeth-length-200mm-material-steel-sku-17292601/): Material: Steel. - [timing bar HTD 5M 26 teeth length 200mm material aluminium SKU: 17292600](https://maedler.in/product/timing-bar-htd-5m-26-teeth-length-200mm-material-aluminium-sku-17292600/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 25 teeth length 200mm material steel SKU: 17292501](https://maedler.in/product/timing-bar-htd-5m-25-teeth-length-200mm-material-steel-sku-17292501/): Material: Steel. - [timing bar HTD 5M 25 teeth length 200mm material aluminium SKU: 17292500](https://maedler.in/product/timing-bar-htd-5m-25-teeth-length-200mm-material-aluminium-sku-17292500/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 24 teeth length 200mm material steel SKU: 17292401](https://maedler.in/product/timing-bar-htd-5m-24-teeth-length-200mm-material-steel-sku-17292401/): Material: Steel. - [timing bar HTD 5M 24 teeth length 200mm material aluminium SKU: 17292400](https://maedler.in/product/timing-bar-htd-5m-24-teeth-length-200mm-material-aluminium-sku-17292400/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 23 teeth length 200mm material steel SKU: 17292301](https://maedler.in/product/timing-bar-htd-5m-23-teeth-length-200mm-material-steel-sku-17292301/): Material: Steel. - [timing bar HTD 5M 23 teeth length 200mm material aluminium SKU: 17292300](https://maedler.in/product/timing-bar-htd-5m-23-teeth-length-200mm-material-aluminium-sku-17292300/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 22 teeth length 200mm material steel SKU: 17292201](https://maedler.in/product/timing-bar-htd-5m-22-teeth-length-200mm-material-steel-sku-17292201/): Material: Steel. - [timing bar HTD 5M 22 teeth length 200mm material aluminium SKU: 17292200](https://maedler.in/product/timing-bar-htd-5m-22-teeth-length-200mm-material-aluminium-sku-17292200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 21 teeth length 200mm material steel SKU: 17292101](https://maedler.in/product/timing-bar-htd-5m-21-teeth-length-200mm-material-steel-sku-17292101/): Material: Steel. - [timing bar HTD 5M 21 teeth length 200mm material aluminium SKU: 17292100](https://maedler.in/product/timing-bar-htd-5m-21-teeth-length-200mm-material-aluminium-sku-17292100/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 20 teeth length 200mm material steel SKU: 17292001](https://maedler.in/product/timing-bar-htd-5m-20-teeth-length-200mm-material-steel-sku-17292001/): Material: Steel. - [timing bar HTD 5M 20 teeth length 200mm material aluminium SKU: 17292000](https://maedler.in/product/timing-bar-htd-5m-20-teeth-length-200mm-material-aluminium-sku-17292000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 19 teeth length 200mm material steel SKU: 17291901](https://maedler.in/product/timing-bar-htd-5m-19-teeth-length-200mm-material-steel-sku-17291901/): Material: Steel. - [timing bar HTD 5M 19 teeth length 200mm material aluminium SKU: 17291900](https://maedler.in/product/timing-bar-htd-5m-19-teeth-length-200mm-material-aluminium-sku-17291900/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 18 teeth length 200mm material steel SKU: 17291801](https://maedler.in/product/timing-bar-htd-5m-18-teeth-length-200mm-material-steel-sku-17291801/): Material: Steel. - [timing bar HTD 5M 18 teeth length 200mm material aluminium SKU: 17291800](https://maedler.in/product/timing-bar-htd-5m-18-teeth-length-200mm-material-aluminium-sku-17291800/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 17 teeth toothed length min. 175mm total length 200mm material steel SKU: 17291701](https://maedler.in/product/timing-bar-htd-5m-17-teeth-toothed-length-min-175mm-total-length-200mm-material-steel-sku-17291701/): Material: Steel. - [timing bar HTD 5M 17 teeth toothed length min. 175mm total length 200mm material aluminium SKU: 17291700](https://maedler.in/product/timing-bar-htd-5m-17-teeth-toothed-length-min-175mm-total-length-200mm-material-aluminium-sku-17291700/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 16 teeth toothed length min. 175mm total length 200mm material steel SKU: 17291601](https://maedler.in/product/timing-bar-htd-5m-16-teeth-toothed-length-min-175mm-total-length-200mm-material-steel-sku-17291601/): Material: Steel. - [timing bar HTD 5M 16 teeth toothed length min. 175mm total length 200mm material aluminium SKU: 17291600](https://maedler.in/product/timing-bar-htd-5m-16-teeth-toothed-length-min-175mm-total-length-200mm-material-aluminium-sku-17291600/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 15 teeth toothed length min. 175mm total length 200mm material steel SKU: 17291501](https://maedler.in/product/timing-bar-htd-5m-15-teeth-toothed-length-min-175mm-total-length-200mm-material-steel-sku-17291501/): Material: Steel. - [timing bar HTD 5M 15 teeth toothed length min. 175mm total length 200mm material aluminium SKU: 17291500](https://maedler.in/product/timing-bar-htd-5m-15-teeth-toothed-length-min-175mm-total-length-200mm-material-aluminium-sku-17291500/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 14 teeth toothed length min. 175mm total length 200mm material steel SKU: 17291401](https://maedler.in/product/timing-bar-htd-5m-14-teeth-toothed-length-min-175mm-total-length-200mm-material-steel-sku-17291401/): Material: Steel. - [timing bar HTD 5M 14 teeth toothed length min. 175mm total length 200mm material aluminium SKU: 17291400](https://maedler.in/product/timing-bar-htd-5m-14-teeth-toothed-length-min-175mm-total-length-200mm-material-aluminium-sku-17291400/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 13 teeth length 160mm material steel SKU: 17291301](https://maedler.in/product/timing-bar-htd-5m-13-teeth-length-160mm-material-steel-sku-17291301/): Material: Steel. - [timing bar HTD 5M 13 teeth length 160mm material aluminium SKU: 17291300](https://maedler.in/product/timing-bar-htd-5m-13-teeth-length-160mm-material-aluminium-sku-17291300/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 12 teeth length 160mm material steel SKU: 17291201](https://maedler.in/product/timing-bar-htd-5m-12-teeth-length-160mm-material-steel-sku-17291201/): Material: Steel. - [timing bar HTD 5M 12 teeth length 160mm material aluminium SKU: 17291200](https://maedler.in/product/timing-bar-htd-5m-12-teeth-length-160mm-material-aluminium-sku-17291200/): Material: Aluminium similar to EN AW2017A. - [timing belt pulley HTD-5M, 112 teeth, for belt width 25mm, for taper-bush 2012 SKU: 17277494](https://maedler.in/product/timing-belt-pulley-htd-5m-112-teeth-for-belt-width-25mm-for-taper-bush-2012-sku-17277494/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 90 teeth, for belt width 25mm, for taper-bush 1610 SKU: 17277490](https://maedler.in/product/timing-belt-pulley-htd-5m-90-teeth-for-belt-width-25mm-for-taper-bush-1610-sku-17277490/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 80 teeth, for belt width 25mm, for taper-bush 1610 SKU: 17277480](https://maedler.in/product/timing-belt-pulley-htd-5m-80-teeth-for-belt-width-25mm-for-taper-bush-1610-sku-17277480/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 72 teeth, for belt width 25mm, for taper-bush 1610 SKU: 17277472](https://maedler.in/product/timing-belt-pulley-htd-5m-72-teeth-for-belt-width-25mm-for-taper-bush-1610-sku-17277472/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 64 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277464](https://maedler.in/product/timing-belt-pulley-htd-5m-64-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277464/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 60 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277460](https://maedler.in/product/timing-belt-pulley-htd-5m-60-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277460/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 56 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277456](https://maedler.in/product/timing-belt-pulley-htd-5m-56-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277456/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Neoprene timing belt HTD 5M width 25mm Lw 2000mm 400 teeth SKU: 17358200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-2000mm-400-teeth-sku-17358200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1895mm 379 teeth SKU: 17357900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1895mm-379-teeth-sku-17357900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1870mm 374 teeth SKU: 17357800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1870mm-374-teeth-sku-17357800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1800mm 360 teeth SKU: 17357600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1800mm-360-teeth-sku-17357600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1790mm 358 teeth SKU: 17357500](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1790mm-358-teeth-sku-17357500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1595mm 319 teeth SKU: 17357100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1595mm-319-teeth-sku-17357100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1500mm 300 teeth SKU: 17356900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1500mm-300-teeth-sku-17356900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1420mm 284 teeth SKU: 17356700](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1420mm-284-teeth-sku-17356700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1270mm 254 teeth SKU: 17356300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1270mm-254-teeth-sku-17356300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1125mm 225 teeth SKU: 17355900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1125mm-225-teeth-sku-17355900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1050mm 210 teeth SKU: 17355600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1050mm-210-teeth-sku-17355600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1000mm 200 teeth SKU: 17355400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1000mm-200-teeth-sku-17355400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 950mm 190 teeth SKU: 17355200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-950mm-190-teeth-sku-17355200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 925mm 185 teeth SKU: 17355100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-925mm-185-teeth-sku-17355100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 890mm 178 teeth SKU: 17354900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-890mm-178-teeth-sku-17354900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 835mm 167 teeth SKU: 17354600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-835mm-167-teeth-sku-17354600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 800mm 160 teeth SKU: 17354400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-800mm-160-teeth-sku-17354400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 755mm 151 teeth SKU: 17354200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-755mm-151-teeth-sku-17354200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 740mm 148 teeth SKU: 17354100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-740mm-148-teeth-sku-17354100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 710mm 142 teeth SKU: 17353900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-710mm-142-teeth-sku-17353900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 665mm 133 teeth SKU: 17353600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-665mm-133-teeth-sku-17353600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 635mm 127 teeth SKU: 17353400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-635mm-127-teeth-sku-17353400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 615mm 123 teeth SKU: 17353300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-615mm-123-teeth-sku-17353300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 600mm 120 teeth SKU: 17353200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-600mm-120-teeth-sku-17353200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 565mm 113 teeth SKU: 17353000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-565mm-113-teeth-sku-17353000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 535mm 107 teeth SKU: 17352800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-535mm-107-teeth-sku-17352800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 500mm 100 teeth SKU: 17352600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-500mm-100-teeth-sku-17352600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 450mm 90 teeth SKU: 17352200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-450mm-90-teeth-sku-17352200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 425mm 85 teeth SKU: 17352000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-425mm-85-teeth-sku-17352000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 400mm 80 teeth SKU: 17351800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-400mm-80-teeth-sku-17351800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 375mm 75 teeth SKU: 17351600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-375mm-75-teeth-sku-17351600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 350mm 70 teeth SKU: 17351400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-350mm-70-teeth-sku-17351400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 330mm 66 teeth SKU: 17351200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-330mm-66-teeth-sku-17351200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm 5M-25 open length SKU: 17350000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-5m-25-open-length-sku-17350000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 5M belt width 15mm SKU: 17339900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-5m-belt-width-15mm-sku-17339900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 5M width 15mm Lw 2525mm 505 teeth SKU: 17338800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-2525mm-505-teeth-sku-17338800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 2000mm 400 teeth SKU: 17338200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-2000mm-400-teeth-sku-17338200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1895mm 379 teeth SKU: 17337900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1895mm-379-teeth-sku-17337900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1870mm 374 teeth SKU: 17337800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1870mm-374-teeth-sku-17337800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1800mm 360 teeth SKU: 17337600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1800mm-360-teeth-sku-17337600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1790mm 358 teeth SKU: 17337500](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1790mm-358-teeth-sku-17337500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1595mm 319 teeth SKU: 17337100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1595mm-319-teeth-sku-17337100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1500mm 300 teeth SKU: 17336900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1500mm-300-teeth-sku-17336900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1420mm 284 teeth SKU: 17336700](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1420mm-284-teeth-sku-17336700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1270mm 254 teeth SKU: 17336300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1270mm-254-teeth-sku-17336300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1125mm 225 teeth SKU: 17335900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1125mm-225-teeth-sku-17335900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1050mm 210 teeth SKU: 17335600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1050mm-210-teeth-sku-17335600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1000mm 200 teeth SKU: 17335400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1000mm-200-teeth-sku-17335400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 950mm 190 teeth SKU: 17335200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-950mm-190-teeth-sku-17335200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 925mm 185 teeth SKU: 17335100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-925mm-185-teeth-sku-17335100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 890mm 178 teeth SKU: 17334900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-890mm-178-teeth-sku-17334900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 835mm 167 teeth SKU: 17334600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-835mm-167-teeth-sku-17334600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 800mm 160 teeth SKU: 17334400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-800mm-160-teeth-sku-17334400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 755mm 151 teeth SKU: 17334200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-755mm-151-teeth-sku-17334200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 740mm 148 teeth SKU: 17334100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-740mm-148-teeth-sku-17334100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 710mm 142 teeth SKU: 17333900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-710mm-142-teeth-sku-17333900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 665mm 133 teeth SKU: 17333600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-665mm-133-teeth-sku-17333600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 635mm 127 teeth SKU: 17333400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-635mm-127-teeth-sku-17333400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 615mm 123 teeth SKU: 17333300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-615mm-123-teeth-sku-17333300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 600mm 120 teeth SKU: 17333200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-600mm-120-teeth-sku-17333200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 565mm 113 teeth SKU: 17333000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-565mm-113-teeth-sku-17333000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 535mm 107 teeth SKU: 17332800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-535mm-107-teeth-sku-17332800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 500mm 100 teeth SKU: 17332600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-500mm-100-teeth-sku-17332600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 450mm 90 teeth SKU: 17332200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-450mm-90-teeth-sku-17332200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 425mm 85 teeth SKU: 17332000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-425mm-85-teeth-sku-17332000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 400mm 80 teeth SKU: 17331800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-400mm-80-teeth-sku-17331800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 375mm 75 teeth SKU: 17331600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-375mm-75-teeth-sku-17331600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 350mm 70 teeth SKU: 17331400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-350mm-70-teeth-sku-17331400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 330mm 66 teeth SKU: 17331200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-330mm-66-teeth-sku-17331200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm 5M-15 open length SKU: 17330000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-5m-15-open-length-sku-17330000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 5M belt width 10mm SKU: 17319900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-5m-belt-width-10mm-sku-17319900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 5M width 9mm Lw 2525mm 505 teeth SKU: 17318800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-2525mm-505-teeth-sku-17318800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 2000mm 400 teeth SKU: 17318200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-2000mm-400-teeth-sku-17318200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1895mm 379 teeth SKU: 17317900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1895mm-379-teeth-sku-17317900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1870mm 374 teeth SKU: 17317800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1870mm-374-teeth-sku-17317800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1800mm 360 teeth SKU: 17317600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1800mm-360-teeth-sku-17317600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1790mm 358 teeth SKU: 17317500](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1790mm-358-teeth-sku-17317500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1595mm 319 teeth SKU: 17317100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1595mm-319-teeth-sku-17317100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1500mm 300 teeth SKU: 17316900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1500mm-300-teeth-sku-17316900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1420mm 284 teeth SKU: 17316700](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1420mm-284-teeth-sku-17316700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1270mm 254 teeth SKU: 17316300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1270mm-254-teeth-sku-17316300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1125mm 225 teeth SKU: 17315900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1125mm-225-teeth-sku-17315900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1050mm 210 teeth SKU: 17315600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1050mm-210-teeth-sku-17315600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1000mm 200 teeth SKU: 17315400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1000mm-200-teeth-sku-17315400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 950mm 190 teeth SKU: 17315200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-950mm-190-teeth-sku-17315200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 925mm 185 teeth SKU: 17315100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-925mm-185-teeth-sku-17315100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 890mm 178 teeth SKU: 17314900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-890mm-178-teeth-sku-17314900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 835mm 167 teeth SKU: 17314600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-835mm-167-teeth-sku-17314600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 800mm 160 teeth SKU: 17314400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-800mm-160-teeth-sku-17314400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 755mm 151 teeth SKU: 17314200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-755mm-151-teeth-sku-17314200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 740mm 148 teeth SKU: 17314100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-740mm-148-teeth-sku-17314100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 710mm 142 teeth SKU: 17313900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-710mm-142-teeth-sku-17313900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 665mm 133 teeth SKU: 17313600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-665mm-133-teeth-sku-17313600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 635mm 127 teeth SKU: 17313400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-635mm-127-teeth-sku-17313400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 615mm 123 teeth SKU: 17313300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-615mm-123-teeth-sku-17313300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 600mm 120 teeth SKU: 17313200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-600mm-120-teeth-sku-17313200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 565mm 113 teeth SKU: 17313000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-565mm-113-teeth-sku-17313000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 535mm 107 teeth SKU: 17312800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-535mm-107-teeth-sku-17312800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 500mm 100 teeth SKU: 17312600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-500mm-100-teeth-sku-17312600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 450mm 90 teeth SKU: 17312200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-450mm-90-teeth-sku-17312200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 20mm for taper bush 1610 SKU: 17477118](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477118/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 20mm for taper bush 1610 SKU: 17477117](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477117/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 20mm for taper bush 1610 SKU: 17477116](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477116/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 20mm for taper bush 1108 SKU: 17477115](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-20mm-for-taper-bush-1108-sku-17477115/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 20mm for taper bush 1108 SKU: 17477114](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-20mm-for-taper-bush-1108-sku-17477114/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 20mm for taper bush 1108 SKU: 17477113](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-20mm-for-taper-bush-1108-sku-17477113/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 20mm for taper bush 1108 SKU: 17477112](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-20mm-for-taper-bush-1108-sku-17477112/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 20mm for taper bush 1008 SKU: 17477111](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-20mm-for-taper-bush-1008-sku-17477111/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 192 teeth for belt width 85mm SKU: 17459600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-192-teeth-for-belt-width-85mm-sku-17459600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 168 teeth for belt width 85mm SKU: 17458400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-168-teeth-for-belt-width-85mm-sku-17458400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 144 teeth for belt width 85mm SKU: 17457200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-144-teeth-for-belt-width-85mm-sku-17457200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 112 teeth for belt width 85mm SKU: 17455600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-112-teeth-for-belt-width-85mm-sku-17455600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 90 teeth for belt width 85mm SKU: 17454500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-90-teeth-for-belt-width-85mm-sku-17454500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 80 teeth for belt width 85mm SKU: 17454000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-80-teeth-for-belt-width-85mm-sku-17454000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 85mm SKU: 17453600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-85mm-sku-17453600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 85mm SKU: 17453200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-85mm-sku-17453200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 85mm SKU: 17452800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-85mm-sku-17452800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 85mm SKU: 17452400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-85mm-sku-17452400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 85mm SKU: 17452200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-85mm-sku-17452200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 85mm SKU: 17452000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-85mm-sku-17452000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 85mm SKU: 17451900](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-85mm-sku-17451900/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 85mm SKU: 17451800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-85mm-sku-17451800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 85mm SKU: 17451700](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-85mm-sku-17451700/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 85mm SKU: 17451600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-85mm-sku-17451600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 85mm SKU: 17451500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-85mm-sku-17451500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 85mm SKU: 17451400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-85mm-sku-17451400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 85mm SKU: 17451300](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-85mm-sku-17451300/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 25 teeth for belt width 85mm SKU: 17451250](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-25-teeth-for-belt-width-85mm-sku-17451250/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 85mm SKU: 17451200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-85mm-sku-17451200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 85mm SKU: 17451100](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-85mm-sku-17451100/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 112 teeth for belt width 50mm SKU: 17445600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-112-teeth-for-belt-width-50mm-sku-17445600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 50mm SKU: 17444500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-50mm-sku-17444500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 50mm SKU: 17444000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-50mm-sku-17444000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 50mm SKU: 17443600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-50mm-sku-17443600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 50mm SKU: 17443200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-50mm-sku-17443200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 50mm SKU: 17443000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-50mm-sku-17443000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 50mm SKU: 17442800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-50mm-sku-17442800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 50mm SKU: 17442400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-50mm-sku-17442400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 50mm SKU: 17442200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-50mm-sku-17442200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 50mm SKU: 17442000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-50mm-sku-17442000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 50mm SKU: 17441900](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-50mm-sku-17441900/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 50mm SKU: 17441800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-50mm-sku-17441800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 50mm SKU: 17441700](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-50mm-sku-17441700/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 50mm SKU: 17441600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-50mm-sku-17441600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 50mm SKU: 17441500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-50mm-sku-17441500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 50mm SKU: 17441400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-50mm-sku-17441400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 50mm SKU: 17441300](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-50mm-sku-17441300/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 25 teeth for belt width 50mm SKU: 17441250](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-25-teeth-for-belt-width-50mm-sku-17441250/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 50mm SKU: 17441200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-50mm-sku-17441200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 50mm SKU: 17441100](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-50mm-sku-17441100/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 112 teeth for belt width 30mm SKU: 17425600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-112-teeth-for-belt-width-30mm-sku-17425600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 30mm SKU: 17424500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-30mm-sku-17424500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 30mm SKU: 17424000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-30mm-sku-17424000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 30mm SKU: 17423600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-30mm-sku-17423600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 30mm SKU: 17423200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-30mm-sku-17423200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 30mm SKU: 17423000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-30mm-sku-17423000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 30mm SKU: 17422800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-30mm-sku-17422800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 30mm SKU: 17422400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-30mm-sku-17422400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 30mm SKU: 17422200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-30mm-sku-17422200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 30mm SKU: 17422000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-30mm-sku-17422000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 30mm SKU: 17421900](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-30mm-sku-17421900/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 30mm SKU: 17421800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-30mm-sku-17421800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 30mm SKU: 17421700](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-30mm-sku-17421700/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 30mm SKU: 17421600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-30mm-sku-17421600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 30mm SKU: 17421500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-30mm-sku-17421500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 30mm SKU: 17421400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-30mm-sku-17421400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 30mm SKU: 17421300](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-30mm-sku-17421300/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 25 teeth for belt width 30mm SKU: 17421250](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-25-teeth-for-belt-width-30mm-sku-17421250/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 30mm SKU: 17421200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-30mm-sku-17421200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 30mm SKU: 17421100](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-30mm-sku-17421100/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 112 teeth for belt width 20mm SKU: 17415600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-112-teeth-for-belt-width-20mm-sku-17415600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 20mm SKU: 17414500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-20mm-sku-17414500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 20mm SKU: 17414000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-20mm-sku-17414000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 20mm SKU: 17413600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-20mm-sku-17413600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 20mm SKU: 17413200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-20mm-sku-17413200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 20mm SKU: 17413000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-20mm-sku-17413000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 20mm SKU: 17412800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-20mm-sku-17412800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 20mm SKU: 17412400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-20mm-sku-17412400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 20mm SKU: 17412200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-20mm-sku-17412200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 20mm SKU: 17412000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-20mm-sku-17412000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 20mm SKU: 17411900](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-20mm-sku-17411900/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 20mm SKU: 17411800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-20mm-sku-17411800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 20mm SKU: 17411700](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-20mm-sku-17411700/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 20mm SKU: 17411600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-20mm-sku-17411600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 20mm SKU: 17411500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-20mm-sku-17411500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 20mm SKU: 17411400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-20mm-sku-17411400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 20mm SKU: 17411300](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-20mm-sku-17411300/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 25 teeth for belt width 20mm SKU: 17411250](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-25-teeth-for-belt-width-20mm-sku-17411250/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 20mm SKU: 17411200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-20mm-sku-17411200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 20mm SKU: 17411100](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-20mm-sku-17411100/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Polyurethane timing belt HTD 5M width 50mm 5M-50 open length PAZ = Polyamide fabric on tooth side SKU: 17366701](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-50mm-5m-50-open-length-paz-polyamide-fabric-on-tooth-side-sku-17366701/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 5M width 50mm 5M-50 open length with tensile members from steel packed 2 x 25mm SKU: 17366700](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-50mm-5m-50-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-17366700/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 5M width 25mm 5M-25 open length PAZ = Polyamide fabric on tooth side SKU: 17366501](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-25mm-5m-25-open-length-paz-polyamide-fabric-on-tooth-side-sku-17366501/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 5M width 25mm 5M-25 open length SKU: 17366500](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-25mm-5m-25-open-length-sku-17366500/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 5M width 15mm 5M-15 open length PAZ = Polyamide fabric on tooth side SKU: 17366301](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-15mm-5m-15-open-length-paz-polyamide-fabric-on-tooth-side-sku-17366301/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 5M width 15mm 5M-15 open length SKU: 17366300](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-15mm-5m-15-open-length-sku-17366300/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 5M width 10mm 5M-10 open length PAZ = Polyamide fabric on tooth side SKU: 17366101](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-10mm-5m-10-open-length-paz-polyamide-fabric-on-tooth-side-sku-17366101/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 5M width 10mm 5M-10 open length SKU: 17366100](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-10mm-5m-10-open-length-sku-17366100/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium HTD 5M belt width 25mm SKU: 17359900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-5m-belt-width-25mm-sku-17359900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 5M width 25mm Lw 2525mm 505 teeth SKU: 17358800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-2525mm-505-teeth-sku-17358800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [timing bar HTD 8M 44 teeth length 200mm material aluminium SKU: 17494401](https://maedler.in/product/timing-bar-htd-8m-44-teeth-length-200mm-material-aluminium-sku-17494401/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 44 teeth length 200mm material steel SKU: 17494400](https://maedler.in/product/timing-bar-htd-8m-44-teeth-length-200mm-material-steel-sku-17494400/): Material: Steel. - [timing bar HTD 8M 40 teeth length 200mm material aluminium SKU: 17494001](https://maedler.in/product/timing-bar-htd-8m-40-teeth-length-200mm-material-aluminium-sku-17494001/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 40 teeth length 200mm material steel SKU: 17494000](https://maedler.in/product/timing-bar-htd-8m-40-teeth-length-200mm-material-steel-sku-17494000/): Material: Steel. - [timing bar HTD 8M 38 teeth length 200mm material aluminium SKU: 17493801](https://maedler.in/product/timing-bar-htd-8m-38-teeth-length-200mm-material-aluminium-sku-17493801/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 38 teeth length 200mm material steel SKU: 17493800](https://maedler.in/product/timing-bar-htd-8m-38-teeth-length-200mm-material-steel-sku-17493800/): Material: Steel. - [timing bar HTD 8M 36 teeth length 200mm material aluminium SKU: 17493601](https://maedler.in/product/timing-bar-htd-8m-36-teeth-length-200mm-material-aluminium-sku-17493601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 36 teeth length 200mm material steel SKU: 17493600](https://maedler.in/product/timing-bar-htd-8m-36-teeth-length-200mm-material-steel-sku-17493600/): Material: Steel. - [timing bar HTD 8M 35 teeth length 200mm material aluminium SKU: 17493501](https://maedler.in/product/timing-bar-htd-8m-35-teeth-length-200mm-material-aluminium-sku-17493501/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 35 teeth length 200mm material steel SKU: 17493500](https://maedler.in/product/timing-bar-htd-8m-35-teeth-length-200mm-material-steel-sku-17493500/): Material: Steel. - [timing bar HTD 8M 34 teeth length 200mm material aluminium SKU: 17493401](https://maedler.in/product/timing-bar-htd-8m-34-teeth-length-200mm-material-aluminium-sku-17493401/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 34 teeth length 200mm material steel SKU: 17493400](https://maedler.in/product/timing-bar-htd-8m-34-teeth-length-200mm-material-steel-sku-17493400/): Material: Steel. - [timing bar HTD 8M 32 teeth length 200mm material aluminium SKU: 17493201](https://maedler.in/product/timing-bar-htd-8m-32-teeth-length-200mm-material-aluminium-sku-17493201/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 32 teeth length 200mm material steel SKU: 17493200](https://maedler.in/product/timing-bar-htd-8m-32-teeth-length-200mm-material-steel-sku-17493200/): Material: Steel. - [timing bar HTD 8M 30 teeth length 200mm material aluminium SKU: 17493001](https://maedler.in/product/timing-bar-htd-8m-30-teeth-length-200mm-material-aluminium-sku-17493001/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 30 teeth length 200mm material steel SKU: 17493000](https://maedler.in/product/timing-bar-htd-8m-30-teeth-length-200mm-material-steel-sku-17493000/): Material: Steel. - [timing bar HTD 8M 28 teeth length 200mm material aluminium SKU: 17492801](https://maedler.in/product/timing-bar-htd-8m-28-teeth-length-200mm-material-aluminium-sku-17492801/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 28 teeth length 200mm material steel SKU: 17492800](https://maedler.in/product/timing-bar-htd-8m-28-teeth-length-200mm-material-steel-sku-17492800/): Material: Steel. - [timing bar HTD 8M 26 teeth length 200mm material aluminium SKU: 17492601](https://maedler.in/product/timing-bar-htd-8m-26-teeth-length-200mm-material-aluminium-sku-17492601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 26 teeth length 200mm material steel SKU: 17492600](https://maedler.in/product/timing-bar-htd-8m-26-teeth-length-200mm-material-steel-sku-17492600/): Material: Steel. - [timing bar HTD 8M 25 teeth length 200mm material aluminium SKU: 17492501](https://maedler.in/product/timing-bar-htd-8m-25-teeth-length-200mm-material-aluminium-sku-17492501/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 25 teeth length 200mm material steel SKU: 17492500](https://maedler.in/product/timing-bar-htd-8m-25-teeth-length-200mm-material-steel-sku-17492500/): Material: Steel. - [timing bar HTD 8M 24 teeth length 200mm material aluminium SKU: 17492401](https://maedler.in/product/timing-bar-htd-8m-24-teeth-length-200mm-material-aluminium-sku-17492401/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 24 teeth length 200mm material steel SKU: 17492400](https://maedler.in/product/timing-bar-htd-8m-24-teeth-length-200mm-material-steel-sku-17492400/): Material: Steel. - [timing bar HTD 8M 23 teeth length 200mm material aluminium SKU: 17492301](https://maedler.in/product/timing-bar-htd-8m-23-teeth-length-200mm-material-aluminium-sku-17492301/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 23 teeth length 200mm material steel SKU: 17492300](https://maedler.in/product/timing-bar-htd-8m-23-teeth-length-200mm-material-steel-sku-17492300/): Material: Steel. - [timing bar HTD 8M 22 teeth length 200mm material aluminium SKU: 17492201](https://maedler.in/product/timing-bar-htd-8m-22-teeth-length-200mm-material-aluminium-sku-17492201/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 22 teeth length 200mm material steel SKU: 17492200](https://maedler.in/product/timing-bar-htd-8m-22-teeth-length-200mm-material-steel-sku-17492200/): Material: Steel. - [timing bar HTD 8M 21 teeth length 200mm material aluminium SKU: 17492101](https://maedler.in/product/timing-bar-htd-8m-21-teeth-length-200mm-material-aluminium-sku-17492101/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 21 teeth length 200mm material steel SKU: 17492100](https://maedler.in/product/timing-bar-htd-8m-21-teeth-length-200mm-material-steel-sku-17492100/): Material: Steel. - [timing bar HTD 8M 20 teeth length 200mm material aluminium SKU: 17492001](https://maedler.in/product/timing-bar-htd-8m-20-teeth-length-200mm-material-aluminium-sku-17492001/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 20 teeth length 200mm material steel SKU: 17492000](https://maedler.in/product/timing-bar-htd-8m-20-teeth-length-200mm-material-steel-sku-17492000/): Material: Steel. - [timing bar HTD 8M 19 teeth length 200mm material aluminium SKU: 17491901](https://maedler.in/product/timing-bar-htd-8m-19-teeth-length-200mm-material-aluminium-sku-17491901/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 19 teeth length 200mm material steel SKU: 17491900](https://maedler.in/product/timing-bar-htd-8m-19-teeth-length-200mm-material-steel-sku-17491900/): Material: Steel. - [timing bar HTD 8M 18 teeth length 200mm material aluminium SKU: 17491801](https://maedler.in/product/timing-bar-htd-8m-18-teeth-length-200mm-material-aluminium-sku-17491801/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 18 teeth length 200mm material steel SKU: 17491800](https://maedler.in/product/timing-bar-htd-8m-18-teeth-length-200mm-material-steel-sku-17491800/): Material: Steel. - [timing bar HTD 8M 17 teeth length 200mm material aluminium SKU: 17491701](https://maedler.in/product/timing-bar-htd-8m-17-teeth-length-200mm-material-aluminium-sku-17491701/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 17 teeth length 200mm material steel SKU: 17491700](https://maedler.in/product/timing-bar-htd-8m-17-teeth-length-200mm-material-steel-sku-17491700/): Material: Steel. - [timing bar HTD 8M 16 teeth length 200mm material aluminium SKU: 17491601](https://maedler.in/product/timing-bar-htd-8m-16-teeth-length-200mm-material-aluminium-sku-17491601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 16 teeth length 200mm material steel SKU: 17491600](https://maedler.in/product/timing-bar-htd-8m-16-teeth-length-200mm-material-steel-sku-17491600/): Material: Steel. - [timing bar HTD 8M 15 teeth length 200mm material aluminium SKU: 17491501](https://maedler.in/product/timing-bar-htd-8m-15-teeth-length-200mm-material-aluminium-sku-17491501/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 15 teeth length 200mm material steel SKU: 17491500](https://maedler.in/product/timing-bar-htd-8m-15-teeth-length-200mm-material-steel-sku-17491500/): Material: Steel. - [Timing belt pulley HTD 8M material cast iron 192 teeth for belt width 85mm for taper bush 3525 SKU: 17477596](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-192-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17477596/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 168 teeth for belt width 85mm for taper bush 3525 SKU: 17477584](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-168-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17477584/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 144 teeth for belt width 85mm for taper bush 3525 SKU: 17477572](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-144-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17477572/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 112 teeth for belt width 85mm for taper bush 3020 SKU: 17477556](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-112-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17477556/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 90 teeth for belt width 85mm for taper bush 3020 SKU: 17477545](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-90-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17477545/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 80 teeth for belt width 85mm for taper bush 3020 SKU: 17477540](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-80-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17477540/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 85mm for taper bush 3020 SKU: 17477536](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17477536/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 85mm for taper bush 2517 SKU: 17477532](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17477532/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 85mm for taper bush 2517 SKU: 17477528](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17477528/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 85mm for taper bush 2517 SKU: 17477524](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17477524/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 85mm for taper bush 2012 SKU: 17477522](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-85mm-for-taper-bush-2012-sku-17477522/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 85mm for taper bush 2012 SKU: 17477520](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-85mm-for-taper-bush-2012-sku-17477520/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 85mm for taper bush 1615 SKU: 17477519](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-85mm-for-taper-bush-1615-sku-17477519/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 85mm for taper bush 1615 SKU: 17477518](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-85mm-for-taper-bush-1615-sku-17477518/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 85mm for taper bush 1615 SKU: 17477517](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-85mm-for-taper-bush-1615-sku-17477517/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 50mm for taper bush 3020 SKU: 17477445](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-50mm-for-taper-bush-3020-sku-17477445/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 50mm for taper bush 3020 SKU: 17477440](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-50mm-for-taper-bush-3020-sku-17477440/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 50mm for taper bush 2517 SKU: 17477436](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-50mm-for-taper-bush-2517-sku-17477436/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 50mm for taper bush 2517 SKU: 17477432](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-50mm-for-taper-bush-2517-sku-17477432/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 50mm for taper bush 2517 SKU: 17477430](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-50mm-for-taper-bush-2517-sku-17477430/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 50mm for taper bush 2517 SKU: 17477428](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-50mm-for-taper-bush-2517-sku-17477428/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 50mm for taper bush 2012 SKU: 17477424](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-50mm-for-taper-bush-2012-sku-17477424/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 50mm for taper bush 2012 SKU: 17477422](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-50mm-for-taper-bush-2012-sku-17477422/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 50mm for taper bush 2012 SKU: 17477420](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-50mm-for-taper-bush-2012-sku-17477420/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 50mm for taper bush 1615 SKU: 17477419](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477419/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 50mm for taper bush 1615 SKU: 17477418](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477418/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 50mm for taper bush 1615 SKU: 17477417](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477417/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 50mm for taper bush 1615 SKU: 17477416](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477416/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 50mm for taper bush 1615 SKU: 17477415](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477415/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 50mm for taper bush 1210 SKU: 17477414](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-50mm-for-taper-bush-1210-sku-17477414/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 30mm for taper bush 2517 SKU: 17477245](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477245/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 30mm for taper bush 2517 SKU: 17477240](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477240/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 30mm for taper bush 2517 SKU: 17477236](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477236/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 30mm for taper bush 2517 SKU: 17477232](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477232/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 30mm for taper bush 2517 SKU: 17477230](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477230/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 30mm for taper bush 2012 SKU: 17477228](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-30mm-for-taper-bush-2012-sku-17477228/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 30mm for taper bush 2012 SKU: 17477224](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-30mm-for-taper-bush-2012-sku-17477224/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 30mm for taper bush 2012 SKU: 17477222](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-30mm-for-taper-bush-2012-sku-17477222/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 30mm for taper bush 1615 SKU: 17477220](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477220/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 30mm for taper bush 1615 SKU: 17477219](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477219/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 30mm for taper bush 1615 SKU: 17477218](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477218/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 30mm for taper bush 1615 SKU: 17477217](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477217/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 30mm for taper bush 1615 SKU: 17477216](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477216/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 30mm for taper bush 1615 SKU: 17477215](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477215/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 30mm for taper bush 1210 SKU: 17477214](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-30mm-for-taper-bush-1210-sku-17477214/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 30mm for taper bush 1108 SKU: 17477213](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-30mm-for-taper-bush-1108-sku-17477213/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 30mm for taper bush 1108 SKU: 17477212](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-30mm-for-taper-bush-1108-sku-17477212/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 30mm for taper bush 1008 SKU: 17477211](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-30mm-for-taper-bush-1008-sku-17477211/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 20mm for taper bush 2012 SKU: 17477145](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477145/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 20mm for taper bush 2012 SKU: 17477140](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477140/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 20mm for taper bush 2012 SKU: 17477136](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477136/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 20mm for taper bush 2012 SKU: 17477132](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477132/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 20mm for taper bush 2012 SKU: 17477130](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477130/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 20mm for taper bush 2012 SKU: 17477128](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477128/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 20mm for taper bush 2012 SKU: 17477124](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477124/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 20mm for taper bush 2012 SKU: 17477122](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477122/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 20mm for taper bush 1610 SKU: 17477120](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477120/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 20mm for taper bush 1610 SKU: 17477119](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477119/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt HTD 8M width 100mm 8M-100 open length PAZ = Polyamide fabric on tooth side SKU: 17566801](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-100mm-8m-100-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566801/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 100mm 8M-100 open length with tensile members from steel packed 2 x 50mm SKU: 17566800](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-100mm-8m-100-open-length-with-tensile-members-from-steel-packed-2-x-50mm-sku-17566800/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 85mm 8M-85 open length SKU: 17566700](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-85mm-8m-85-open-length-sku-17566700/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 50mm 8M-50 open length PAZ = Polyamide fabric on tooth side SKU: 17566501](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-50mm-8m-50-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566501/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 50mm 8M-50 open length SKU: 17566500](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-50mm-8m-50-open-length-sku-17566500/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 40mm 8M-40 open length PAZ = Polyamide fabric on tooth side SKU: 17566401](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-40mm-8m-40-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566401/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 40mm 8M-40 open length with tensile members from steel packed 2 x 20mm SKU: 17566400](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-40mm-8m-40-open-length-with-tensile-members-from-steel-packed-2-x-20mm-sku-17566400/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 30mm 8M-30 open length PAZ = Polyamide fabric on tooth side SKU: 17566301](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-30mm-8m-30-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566301/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 30mm 8M-30 open length SKU: 17566300](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-30mm-8m-30-open-length-sku-17566300/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 20mm 8M-20 open length PAZ = Polyamide fabric on tooth side SKU: 17566101](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-20mm-8m-20-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566101/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 20mm 8M-20 open length SKU: 17566100](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-20mm-8m-20-open-length-sku-17566100/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium HTD 8M belt width 50mm SKU: 17559900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-8m-belt-width-50mm-sku-17559900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 8M width 50mm Lw 2800mm 350 teeth SKU: 17555200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-2800mm-350-teeth-sku-17555200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 2400mm 300 teeth SKU: 17554800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-2400mm-300-teeth-sku-17554800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 2000mm 250 teeth SKU: 17554400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-2000mm-250-teeth-sku-17554400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1800mm 225 teeth SKU: 17554200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1800mm-225-teeth-sku-17554200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1760mm 220 teeth SKU: 17554000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1760mm-220-teeth-sku-17554000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1600mm 200 teeth SKU: 17553700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1600mm-200-teeth-sku-17553700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1440mm 180 teeth SKU: 17553400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1440mm-180-teeth-sku-17553400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1360mm 170 teeth SKU: 17553200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1360mm-170-teeth-sku-17553200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1280mm 160 teeth SKU: 17553000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1280mm-160-teeth-sku-17553000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1200mm 150 teeth SKU: 17552800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1200mm-150-teeth-sku-17552800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1120mm 140 teeth SKU: 17552600](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1120mm-140-teeth-sku-17552600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1040mm 130 teeth SKU: 17552400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1040mm-130-teeth-sku-17552400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 960mm 120 teeth SKU: 17552100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-960mm-120-teeth-sku-17552100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 880mm 110 teeth SKU: 17551900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-880mm-110-teeth-sku-17551900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 800mm 100 teeth SKU: 17551700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-800mm-100-teeth-sku-17551700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 720mm 90 teeth SKU: 17551400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-720mm-90-teeth-sku-17551400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 656mm 82 teeth SKU: 17551200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-656mm-82-teeth-sku-17551200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 640mm 80 teeth SKU: 17551100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-640mm-80-teeth-sku-17551100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 600mm 75 teeth SKU: 17550900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-600mm-75-teeth-sku-17550900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 560mm 70 teeth SKU: 17550700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-560mm-70-teeth-sku-17550700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 480mm 60 teeth SKU: 17550500](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-480mm-60-teeth-sku-17550500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm 8M-50 open length SKU: 17550000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-8m-50-open-length-sku-17550000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 8M belt width 30mm SKU: 17539900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-8m-belt-width-30mm-sku-17539900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 8M width 30mm Lw 2800mm 350 teeth SKU: 17535200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-2800mm-350-teeth-sku-17535200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 2400mm 300 teeth SKU: 17534800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-2400mm-300-teeth-sku-17534800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 2000mm 250 teeth SKU: 17534400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-2000mm-250-teeth-sku-17534400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1800mm 225 teeth SKU: 17534200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1800mm-225-teeth-sku-17534200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1760mm 220 teeth SKU: 17534000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1760mm-220-teeth-sku-17534000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1600mm 200 teeth SKU: 17533700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1600mm-200-teeth-sku-17533700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1440mm 180 teeth SKU: 17533400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1440mm-180-teeth-sku-17533400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1360mm 170 teeth SKU: 17533200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1360mm-170-teeth-sku-17533200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1280mm 160 teeth SKU: 17533000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1280mm-160-teeth-sku-17533000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1200mm 150 teeth SKU: 17532800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1200mm-150-teeth-sku-17532800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1120mm 140 teeth SKU: 17532600](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1120mm-140-teeth-sku-17532600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1040mm 130 teeth SKU: 17532400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1040mm-130-teeth-sku-17532400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 960mm 120 teeth SKU: 17532100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-960mm-120-teeth-sku-17532100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 880mm 110 teeth SKU: 17531900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-880mm-110-teeth-sku-17531900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 800mm 100 teeth SKU: 17531700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-800mm-100-teeth-sku-17531700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 720mm 90 teeth SKU: 17531400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-720mm-90-teeth-sku-17531400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 656mm 82 teeth SKU: 17531200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-656mm-82-teeth-sku-17531200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 640mm 80 teeth SKU: 17531100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-640mm-80-teeth-sku-17531100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 600mm 75 teeth SKU: 17530900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-600mm-75-teeth-sku-17530900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 560mm 70 teeth SKU: 17530700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-560mm-70-teeth-sku-17530700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 480mm 60 teeth SKU: 17530500](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-480mm-60-teeth-sku-17530500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm 8M-30 open length SKU: 17530000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-8m-30-open-length-sku-17530000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 8M belt width 20mm SKU: 17519900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-8m-belt-width-20mm-sku-17519900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 8M width 20mm Lw 2800mm 350 teeth SKU: 17515200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-2800mm-350-teeth-sku-17515200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 2400mm 300 teeth SKU: 17514800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-2400mm-300-teeth-sku-17514800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 2000mm 250 teeth SKU: 17514400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-2000mm-250-teeth-sku-17514400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1800mm 225 teeth SKU: 17514200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1800mm-225-teeth-sku-17514200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1760mm 220 teeth SKU: 17514000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1760mm-220-teeth-sku-17514000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1600mm 200 teeth SKU: 17513700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1600mm-200-teeth-sku-17513700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1440mm 180 teeth SKU: 17513400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1440mm-180-teeth-sku-17513400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1360mm 170 teeth SKU: 17513200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1360mm-170-teeth-sku-17513200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1280mm 160 teeth SKU: 17513000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1280mm-160-teeth-sku-17513000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1200mm 150 teeth SKU: 17512800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1200mm-150-teeth-sku-17512800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1120mm 140 teeth SKU: 17512600](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1120mm-140-teeth-sku-17512600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1040mm 130 teeth SKU: 17512400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1040mm-130-teeth-sku-17512400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 960mm 120 teeth SKU: 17512100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-960mm-120-teeth-sku-17512100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 880mm 110 teeth SKU: 17511900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-880mm-110-teeth-sku-17511900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 800mm 100 teeth SKU: 17511700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-800mm-100-teeth-sku-17511700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 720mm 90 teeth SKU: 17511400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-720mm-90-teeth-sku-17511400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 656mm 82 teeth SKU: 17511200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-656mm-82-teeth-sku-17511200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 640mm 80 teeth SKU: 17511100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-640mm-80-teeth-sku-17511100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 600mm 75 teeth SKU: 17510900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-600mm-75-teeth-sku-17510900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 560mm 70 teeth SKU: 17510700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-560mm-70-teeth-sku-17510700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 480mm 60 teeth SKU: 17510500](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-480mm-60-teeth-sku-17510500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm 8M-20 open length SKU: 17510000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-8m-20-open-length-sku-17510000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [timing bar HTD 8M 40 teeth length 200mm material 1.4305 SKU: 17499940](https://maedler.in/product/timing-bar-htd-8m-40-teeth-length-200mm-material-1-4305-sku-17499940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 36 teeth length 200mm material 1.4305 SKU: 17499936](https://maedler.in/product/timing-bar-htd-8m-36-teeth-length-200mm-material-1-4305-sku-17499936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 32 teeth length 200mm material 1.4305 SKU: 17499932](https://maedler.in/product/timing-bar-htd-8m-32-teeth-length-200mm-material-1-4305-sku-17499932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 30 teeth length 200mm material 1.4305 SKU: 17499930](https://maedler.in/product/timing-bar-htd-8m-30-teeth-length-200mm-material-1-4305-sku-17499930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 25 teeth length 200mm material 1.4305 SKU: 17499925](https://maedler.in/product/timing-bar-htd-8m-25-teeth-length-200mm-material-1-4305-sku-17499925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 24 teeth length 200mm material 1.4305 SKU: 17499924](https://maedler.in/product/timing-bar-htd-8m-24-teeth-length-200mm-material-1-4305-sku-17499924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 20 teeth length 200mm material 1.4305 SKU: 17499920](https://maedler.in/product/timing-bar-htd-8m-20-teeth-length-200mm-material-1-4305-sku-17499920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 18 teeth length 200mm material 1.4305 SKU: 17499918](https://maedler.in/product/timing-bar-htd-8m-18-teeth-length-200mm-material-1-4305-sku-17499918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 16 teeth length 200mm material 1.4305 SKU: 17499916](https://maedler.in/product/timing-bar-htd-8m-16-teeth-length-200mm-material-1-4305-sku-17499916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 15 teeth length 200mm material 1.4305 SKU: 17499915](https://maedler.in/product/timing-bar-htd-8m-15-teeth-length-200mm-material-1-4305-sku-17499915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 72 teeth length 200mm material aluminium SKU: 17497201](https://maedler.in/product/timing-bar-htd-8m-72-teeth-length-200mm-material-aluminium-sku-17497201/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 72 teeth length 200mm material steel SKU: 17497200](https://maedler.in/product/timing-bar-htd-8m-72-teeth-length-200mm-material-steel-sku-17497200/): Material: Steel. - [timing bar HTD 8M 64 teeth length 200mm material aluminium SKU: 17496401](https://maedler.in/product/timing-bar-htd-8m-64-teeth-length-200mm-material-aluminium-sku-17496401/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 64 teeth length 200mm material steel SKU: 17496400](https://maedler.in/product/timing-bar-htd-8m-64-teeth-length-200mm-material-steel-sku-17496400/): Material: Steel. - [timing bar HTD 8M 56 teeth length 200mm material aluminium SKU: 17495601](https://maedler.in/product/timing-bar-htd-8m-56-teeth-length-200mm-material-aluminium-sku-17495601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 56 teeth length 200mm material steel SKU: 17495600](https://maedler.in/product/timing-bar-htd-8m-56-teeth-length-200mm-material-steel-sku-17495600/): Material: Steel. - [timing bar HTD 8M 48 teeth length 200mm material aluminium SKU: 17494801](https://maedler.in/product/timing-bar-htd-8m-48-teeth-length-200mm-material-aluminium-sku-17494801/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 48 teeth length 200mm material steel SKU: 17494800](https://maedler.in/product/timing-bar-htd-8m-48-teeth-length-200mm-material-steel-sku-17494800/): Material: Steel. - [timing bar HTD 8M 46 teeth length 200mm material aluminium SKU: 17494601](https://maedler.in/product/timing-bar-htd-8m-46-teeth-length-200mm-material-aluminium-sku-17494601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 46 teeth length 200mm material steel SKU: 17494600](https://maedler.in/product/timing-bar-htd-8m-46-teeth-length-200mm-material-steel-sku-17494600/): Material: Steel. - [Neoprene timing belt HTD 14M width 85mm Lw 1610mm 115 teeth SKU: 17751700](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1610mm-115-teeth-sku-17751700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 1400mm 100 teeth SKU: 17751400](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1400mm-100-teeth-sku-17751400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 1190mm 85 teeth SKU: 17751100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1190mm-85-teeth-sku-17751100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 966mm 69 teeth SKU: 17750800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-966mm-69-teeth-sku-17750800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 4578mm 327 teeth SKU: 17735100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-4578mm-327-teeth-sku-17735100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 4326mm 309 teeth SKU: 17734800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-4326mm-309-teeth-sku-17734800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 3850mm 275 teeth SKU: 17734500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-3850mm-275-teeth-sku-17734500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 3500mm 250 teeth SKU: 17734200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-3500mm-250-teeth-sku-17734200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 3150mm 225 teeth SKU: 17733900](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-3150mm-225-teeth-sku-17733900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2800mm 200 teeth SKU: 17733600](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2800mm-200-teeth-sku-17733600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2590mm 185 teeth SKU: 17733200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2590mm-185-teeth-sku-17733200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2450mm 175 teeth SKU: 17733000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2450mm-175-teeth-sku-17733000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2310mm 165 teeth SKU: 17732800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2310mm-165-teeth-sku-17732800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2100mm 150 teeth SKU: 17732500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2100mm-150-teeth-sku-17732500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1890mm 135 teeth SKU: 17732200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1890mm-135-teeth-sku-17732200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1778mm 127 teeth SKU: 17732000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1778mm-127-teeth-sku-17732000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1610mm 115 teeth SKU: 17731700](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1610mm-115-teeth-sku-17731700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1400mm 100 teeth SKU: 17731400](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1400mm-100-teeth-sku-17731400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1190mm 85 teeth SKU: 17731100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1190mm-85-teeth-sku-17731100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 966mm 69 teeth SKU: 17730800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-966mm-69-teeth-sku-17730800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 4578mm 327 teeth SKU: 17715100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-4578mm-327-teeth-sku-17715100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 4326mm 309 teeth SKU: 17714800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-4326mm-309-teeth-sku-17714800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 3850mm 275 teeth SKU: 17714500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-3850mm-275-teeth-sku-17714500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 3500mm 250 teeth SKU: 17714200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-3500mm-250-teeth-sku-17714200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 3150mm 225 teeth SKU: 17713900](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-3150mm-225-teeth-sku-17713900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2800mm 200 teeth SKU: 17713600](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2800mm-200-teeth-sku-17713600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2590mm 185 teeth SKU: 17713200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2590mm-185-teeth-sku-17713200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2450mm 175 teeth SKU: 17713000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2450mm-175-teeth-sku-17713000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2310mm 165 teeth SKU: 17712800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2310mm-165-teeth-sku-17712800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2100mm 150 teeth SKU: 17712500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2100mm-150-teeth-sku-17712500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1890mm 135 teeth SKU: 17712200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1890mm-135-teeth-sku-17712200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1778mm 127 teeth SKU: 17712000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1778mm-127-teeth-sku-17712000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1610mm 115 teeth SKU: 17711700](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1610mm-115-teeth-sku-17711700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1400mm 100 teeth SKU: 17711400](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1400mm-100-teeth-sku-17711400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1190mm 85 teeth SKU: 17711100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1190mm-85-teeth-sku-17711100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 966mm 69 teeth SKU: 17710800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-966mm-69-teeth-sku-17710800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 85mm for taper bush 3525 SKU: 17677345](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-90-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677345/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 80 teeth for belt width 85mm for taper bush 3525 SKU: 17677340](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-80-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677340/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 72 teeth for belt width 85mm for taper bush 3525 SKU: 17677336](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-72-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677336/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 64 teeth for belt width 85mm for taper bush 3525 SKU: 17677332](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-64-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677332/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 56 teeth for belt width 85mm for taper bush 3525 SKU: 17677328](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-56-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677328/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 48 teeth for belt width 85mm for taper bush 3030 SKU: 17677324](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-48-teeth-for-belt-width-85mm-for-taper-bush-3030-sku-17677324/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 44 teeth for belt width 85mm for taper bush 3030 SKU: 17677322](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-44-teeth-for-belt-width-85mm-for-taper-bush-3030-sku-17677322/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 40 teeth for belt width 85mm for taper bush 3020 SKU: 17677320](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-40-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17677320/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 38 teeth for belt width 85mm for taper bush 3020 SKU: 17677319](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-38-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17677319/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 36 teeth for belt width 85mm for taper bush 3020 SKU: 17677318](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-36-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17677318/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 34 teeth for belt width 85mm for taper bush 2517 SKU: 17677317](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-34-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17677317/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 32 teeth for belt width 85mm for taper bush 2517 SKU: 17677316](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-32-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17677316/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 30 teeth for belt width 85mm for taper bush 2517 SKU: 17677315](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-30-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17677315/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 28 teeth for belt width 85mm for taper bush 2517 SKU: 17677314](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-28-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17677314/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 55mm for taper bush 3020 SKU: 17677245](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-90-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677245/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 80 teeth for belt width 55mm for taper bush 3020 SKU: 17677240](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-80-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677240/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 72 teeth for belt width 55mm for taper bush 3020 SKU: 17677236](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-72-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677236/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 64 teeth for belt width 55mm for taper bush 3020 SKU: 17677232](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-64-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677232/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 56 teeth for belt width 55mm for taper bush 3020 SKU: 17677228](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-56-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677228/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 48 teeth for belt width 55mm for taper bush 3020 SKU: 17677224](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-48-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677224/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 44 teeth for belt width 55mm for taper bush 3020 SKU: 17677222](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-44-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677222/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 40 teeth for belt width 55mm for taper bush 2517 SKU: 17677220](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-40-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677220/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 38 teeth for belt width 55mm for taper bush 2517 SKU: 17677219](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-38-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677219/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 36 teeth for belt width 55mm for taper bush 2517 SKU: 17677218](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-36-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677218/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 34 teeth for belt width 55mm for taper bush 2517 SKU: 17677217](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-34-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677217/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 32 teeth for belt width 55mm for taper bush 2517 SKU: 17677216](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-32-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677216/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 30 teeth for belt width 55mm for taper bush 2517 SKU: 17677215](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-30-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677215/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 28 teeth for belt width 55mm for taper bush 2012 SKU: 17677214](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-28-teeth-for-belt-width-55mm-for-taper-bush-2012-sku-17677214/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 40mm for taper bush 3020 SKU: 17677145](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-90-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677145/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron, 80 teeth for belt width 40mm for taper bush 3020 SKU: 17677140](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-80-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677140/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 72 teeth for belt width 40mm for taper bush 3020 SKU: 17677136](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-72-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677136/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 56 teeth for belt width 40mm for taper bush 3020 SKU: 17677128](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-56-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677128/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 48 teeth for belt width 40mm for taper bush 3020 SKU: 17677124](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-48-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677124/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 44 teeth for belt width 40mm for taper bush 3020 SKU: 17677122](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-44-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677122/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 40 teeth for belt width 40mm for taper bush 2517 SKU: 17677120](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-40-teeth-for-belt-width-40mm-for-taper-bush-2517-sku-17677120/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 38 teeth for belt width 40mm for taper bush 2517 SKU: 17677119](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-38-teeth-for-belt-width-40mm-for-taper-bush-2517-sku-17677119/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 36 teeth for belt width 40mm for taper bush 2517 SKU: 17677118](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-36-teeth-for-belt-width-40mm-for-taper-bush-2517-sku-17677118/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 34 teeth for belt width 40mm for taper bush 2517 SKU: 17677117](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-34-teeth-for-belt-width-40mm-for-taper-bush-2517-sku-17677117/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 32 teeth for belt width 40mm for taper bush 2012 SKU: 17677116](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-32-teeth-for-belt-width-40mm-for-taper-bush-2012-sku-17677116/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 30 teeth for belt width 40mm for taper bush 2012 SKU: 17677115](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-30-teeth-for-belt-width-40mm-for-taper-bush-2012-sku-17677115/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 28 teeth for belt width 40mm for taper bush 2012 SKU: 17677114](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-28-teeth-for-belt-width-40mm-for-taper-bush-2012-sku-17677114/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Fixing plate for timing belts material aluminium HTD 8M belt width 85mm SKU: 17579900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-8m-belt-width-85mm-sku-17579900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 8M width 85mm Lw 2800mm 350 teeth SKU: 17575200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-2800mm-350-teeth-sku-17575200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 2400mm 300 teeth SKU: 17574800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-2400mm-300-teeth-sku-17574800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 2000mm 250 teeth SKU: 17574400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-2000mm-250-teeth-sku-17574400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1800mm 225 teeth SKU: 17574200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1800mm-225-teeth-sku-17574200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1760mm 220 teeth SKU: 17574000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1760mm-220-teeth-sku-17574000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1600mm 200 teeth SKU: 17573700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1600mm-200-teeth-sku-17573700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1440mm 180 teeth SKU: 17573400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1440mm-180-teeth-sku-17573400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1360mm 170 teeth SKU: 17573200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1360mm-170-teeth-sku-17573200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1280mm 160 teeth SKU: 17573000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1280mm-160-teeth-sku-17573000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1200mm 150 teeth SKU: 17572800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1200mm-150-teeth-sku-17572800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1120mm 140 teeth SKU: 17572600](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1120mm-140-teeth-sku-17572600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1040mm 130 teeth SKU: 17572400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1040mm-130-teeth-sku-17572400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 960mm 120 teeth SKU: 17572100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-960mm-120-teeth-sku-17572100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 880mm 110 teeth SKU: 17571900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-880mm-110-teeth-sku-17571900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 800mm 100 teeth SKU: 17571700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-800mm-100-teeth-sku-17571700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 720mm 90 teeth SKU: 17571400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-720mm-90-teeth-sku-17571400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 656mm 82 teeth SKU: 17571200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-656mm-82-teeth-sku-17571200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 640mm 80 teeth SKU: 17571100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-640mm-80-teeth-sku-17571100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 600mm 75 teeth SKU: 17570900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-600mm-75-teeth-sku-17570900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 560mm 70 teeth SKU: 17570700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-560mm-70-teeth-sku-17570700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 480mm 60 teeth SKU: 17570500](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-480mm-60-teeth-sku-17570500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm open length 8M-85 SKU: 17570000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-open-length-8m-85-sku-17570000/): Material: Neoprene (black) with tensile member of glasfibre. Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 XL 025 120 teeth Lw 609.6mm belt width 6.35mm SKU: 18064800](https://maedler.in/product/neoprene-timing-belt-240-xl-025-120-teeth-lw-609-6mm-belt-width-6-35mm-sku-18064800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 230 XL 025 115 teeth Lw 584.2mm belt width 6.35mm SKU: 18064600](https://maedler.in/product/neoprene-timing-belt-230-xl-025-115-teeth-lw-584-2mm-belt-width-6-35mm-sku-18064600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 220 XL 025 110 teeth Lw 558.8mm belt width 6.35mm SKU: 18064400](https://maedler.in/product/neoprene-timing-belt-220-xl-025-110-teeth-lw-558-8mm-belt-width-6-35mm-sku-18064400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 XL 025 105 teeth Lw 533.4mm belt width 6.35mm SKU: 18064200](https://maedler.in/product/neoprene-timing-belt-210-xl-025-105-teeth-lw-533-4mm-belt-width-6-35mm-sku-18064200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 XL 025 100 teeth Lw 508.0mm belt width 6.35mm SKU: 18064000](https://maedler.in/product/neoprene-timing-belt-200-xl-025-100-teeth-lw-508-0mm-belt-width-6-35mm-sku-18064000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 190 XL 025 95 teeth Lw 482.6mm belt width 6.35mm SKU: 18063800](https://maedler.in/product/neoprene-timing-belt-190-xl-025-95-teeth-lw-482-6mm-belt-width-6-35mm-sku-18063800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 180 XL 025 90 teeth Lw 457.2mm belt width 6.35mm SKU: 18063600](https://maedler.in/product/neoprene-timing-belt-180-xl-025-90-teeth-lw-457-2mm-belt-width-6-35mm-sku-18063600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 170 XL 025 85 teeth Lw 431.8mm belt width 6.35mm SKU: 18063400](https://maedler.in/product/neoprene-timing-belt-170-xl-025-85-teeth-lw-431-8mm-belt-width-6-35mm-sku-18063400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 160 XL 025 80 teeth Lw 406.4mm belt width 6.35mm SKU: 18063200](https://maedler.in/product/neoprene-timing-belt-160-xl-025-80-teeth-lw-406-4mm-belt-width-6-35mm-sku-18063200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 XL 025 75 teeth Lw 381.0mm belt width 6.35mm SKU: 18063000](https://maedler.in/product/neoprene-timing-belt-150-xl-025-75-teeth-lw-381-0mm-belt-width-6-35mm-sku-18063000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 140 XL 025 70 teeth Lw 355.6mm belt width 6.35mm SKU: 18062800](https://maedler.in/product/neoprene-timing-belt-140-xl-025-70-teeth-lw-355-6mm-belt-width-6-35mm-sku-18062800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 130 XL 025 65 teeth Lw 330.2mm belt width 6.35mm SKU: 18062600](https://maedler.in/product/neoprene-timing-belt-130-xl-025-65-teeth-lw-330-2mm-belt-width-6-35mm-sku-18062600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 120 XL 025 60 teeth Lw 304.8mm belt width 6.35mm SKU: 18062400](https://maedler.in/product/neoprene-timing-belt-120-xl-025-60-teeth-lw-304-8mm-belt-width-6-35mm-sku-18062400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 110 XL 025 55 teeth Lw 279.4mm belt width 6.35mm SKU: 18062200](https://maedler.in/product/neoprene-timing-belt-110-xl-025-55-teeth-lw-279-4mm-belt-width-6-35mm-sku-18062200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 100 XL 025 50 teeth Lw 254.0mm belt width 6.35mm SKU: 18062000](https://maedler.in/product/neoprene-timing-belt-100-xl-025-50-teeth-lw-254-0mm-belt-width-6-35mm-sku-18062000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 90 XL 025 45 teeth Lw 228.6mm belt width 6.35mm SKU: 18061800](https://maedler.in/product/neoprene-timing-belt-90-xl-025-45-teeth-lw-228-6mm-belt-width-6-35mm-sku-18061800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 80 XL 025 40 teeth Lw 203.2mm belt width 6.35mm SKU: 18061600](https://maedler.in/product/neoprene-timing-belt-80-xl-025-40-teeth-lw-203-2mm-belt-width-6-35mm-sku-18061600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 70 XL 025 35 teeth Lw 177.8mm belt width 6.35mm SKU: 18061400](https://maedler.in/product/neoprene-timing-belt-70-xl-025-35-teeth-lw-177-8mm-belt-width-6-35mm-sku-18061400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 60 XL 025 30 teeth Lw 152.4mm belt width 6.35mm SKU: 18061200](https://maedler.in/product/neoprene-timing-belt-60-xl-025-30-teeth-lw-152-4mm-belt-width-6-35mm-sku-18061200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Timing belt pulley XL material aluminium 72 teeth for belt width 037=9.53mm SKU: 18037200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-72-teeth-for-belt-width-0379-53mm-sku-18037200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 60 teeth for belt width 037=9.53mm SKU: 18036000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-60-teeth-for-belt-width-0379-53mm-sku-18036000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 48 teeth for belt width 037=9.53mm SKU: 18034800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-48-teeth-for-belt-width-0379-53mm-sku-18034800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 44 teeth for belt width 037=9.53mm SKU: 18034400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-44-teeth-for-belt-width-0379-53mm-sku-18034400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 42 teeth for belt width 037=9.53mm SKU: 18034200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-42-teeth-for-belt-width-0379-53mm-sku-18034200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 40 teeth for belt width 037=9.53mm SKU: 18034000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-40-teeth-for-belt-width-0379-53mm-sku-18034000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 38 teeth for belt width 037=9.53mm SKU: 18033800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-38-teeth-for-belt-width-0379-53mm-sku-18033800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 36 teeth for belt width 037=9.53mm SKU: 18033600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-36-teeth-for-belt-width-0379-53mm-sku-18033600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 35 teeth for belt width 037=9.53mm SKU: 18033500](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-35-teeth-for-belt-width-0379-53mm-sku-18033500/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 34 teeth for belt width 037=9.53mm SKU: 18033400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-34-teeth-for-belt-width-0379-53mm-sku-18033400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 32 teeth for belt width 037=9.53mm SKU: 18033200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-32-teeth-for-belt-width-0379-53mm-sku-18033200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 30 teeth for belt width 037=9.53mm SKU: 18033000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-30-teeth-for-belt-width-0379-53mm-sku-18033000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 28 teeth for belt width 037=9.53mm SKU: 18032800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-28-teeth-for-belt-width-0379-53mm-sku-18032800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 27 teeth for belt width 037=9.53mm SKU: 18032700](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-27-teeth-for-belt-width-0379-53mm-sku-18032700/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 26 teeth for belt width 037=9.53mm SKU: 18032600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-26-teeth-for-belt-width-0379-53mm-sku-18032600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 24 teeth for belt width 037=9.53mm SKU: 18032400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-24-teeth-for-belt-width-0379-53mm-sku-18032400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 22 teeth for belt width 037=9.53mm SKU: 18032200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-22-teeth-for-belt-width-0379-53mm-sku-18032200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 21 teeth for belt width 037=9.53mm SKU: 18032100](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-21-teeth-for-belt-width-0379-53mm-sku-18032100/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 20 teeth for belt width 037=9.53mm SKU: 18032000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-20-teeth-for-belt-width-0379-53mm-sku-18032000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 19 teeth for belt width 037=9.53mm SKU: 18031900](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-19-teeth-for-belt-width-0379-53mm-sku-18031900/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 18 teeth for belt width 037=9.53mm SKU: 18031800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-18-teeth-for-belt-width-0379-53mm-sku-18031800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 17 teeth for belt width 037=9.53mm SKU: 18031700](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-17-teeth-for-belt-width-0379-53mm-sku-18031700/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 16 teeth for belt width 037=9.53mm SKU: 18031600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-16-teeth-for-belt-width-0379-53mm-sku-18031600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 15 teeth for belt width 037=9.53mm SKU: 18031500](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-15-teeth-for-belt-width-0379-53mm-sku-18031500/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 14 teeth for belt width 037=9.53mm SKU: 18031400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-14-teeth-for-belt-width-0379-53mm-sku-18031400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 13 teeth for belt width 037=9.53mm SKU: 18031300](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-13-teeth-for-belt-width-0379-53mm-sku-18031300/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 12 teeth for belt width 037=9.53mm SKU: 18031200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-12-teeth-for-belt-width-0379-53mm-sku-18031200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 11 teeth for belt width 037=9.53mm SKU: 18031100](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-11-teeth-for-belt-width-0379-53mm-sku-18031100/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 10 teeth for belt width 037=9.53mm SKU: 18031000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-10-teeth-for-belt-width-0379-53mm-sku-18031000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 72 teeth for belt width 025=6,35mm SKU: 18017200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-72-teeth-for-belt-width-025635mm-sku-18017200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 60 teeth for belt width 025=6,35mm SKU: 18016000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-60-teeth-for-belt-width-025635mm-sku-18016000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 48 teeth for belt width 025=6,35mm SKU: 18014800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-48-teeth-for-belt-width-025635mm-sku-18014800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 44 teeth for belt width 025=6,35mm SKU: 18014400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-44-teeth-for-belt-width-025635mm-sku-18014400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 42 teeth for belt width 025=6,35mm SKU: 18014200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-42-teeth-for-belt-width-025635mm-sku-18014200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 40 teeth for belt width 025=6,35mm SKU: 18014000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-40-teeth-for-belt-width-025635mm-sku-18014000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 38 teeth for belt width 025=6,35mm SKU: 18013800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-38-teeth-for-belt-width-025635mm-sku-18013800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 36 teeth for belt width 025=6,35mm SKU: 18013600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-36-teeth-for-belt-width-025635mm-sku-18013600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 35 teeth for belt width 025=6,35mm SKU: 18013500](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-35-teeth-for-belt-width-025635mm-sku-18013500/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 34 teeth for belt width 025=6,35mm SKU: 18013400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-34-teeth-for-belt-width-025635mm-sku-18013400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 32 teeth for belt width 025=6,35mm SKU: 18013200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-32-teeth-for-belt-width-025635mm-sku-18013200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 30 teeth for belt width 025=6,35mm SKU: 18013000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-30-teeth-for-belt-width-025635mm-sku-18013000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 28 teeth for belt width 025=6,35mm SKU: 18012800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-28-teeth-for-belt-width-025635mm-sku-18012800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 27 teeth for belt width 025=6,35mm SKU: 18012700](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-27-teeth-for-belt-width-025635mm-sku-18012700/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 26 teeth for belt width 025=6,35mm SKU: 18012600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-26-teeth-for-belt-width-025635mm-sku-18012600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 24 teeth for belt width 025=6,35mm SKU: 18012400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-24-teeth-for-belt-width-025635mm-sku-18012400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 22 teeth for belt width 025=6,35mm SKU: 18012200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-22-teeth-for-belt-width-025635mm-sku-18012200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 21 teeth for belt width 025=6,35mm SKU: 18012100](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-21-teeth-for-belt-width-025635mm-sku-18012100/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 20 teeth for belt width 025=6,35mm SKU: 18012000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-20-teeth-for-belt-width-025635mm-sku-18012000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 19 teeth for belt width 025=6,35mm SKU: 18011900](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-19-teeth-for-belt-width-025635mm-sku-18011900/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 18 teeth for belt width 025=6,35mm SKU: 18011800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-18-teeth-for-belt-width-025635mm-sku-18011800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 17 teeth for belt width 025=6,35mm SKU: 18011700](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-17-teeth-for-belt-width-025635mm-sku-18011700/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 16 teeth for belt width 025=6,35mm SKU: 18011600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-16-teeth-for-belt-width-025635mm-sku-18011600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 15 teeth for belt width 025=6,35mm SKU: 18011500](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-15-teeth-for-belt-width-025635mm-sku-18011500/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 14 teeth for belt width 025=6,35mm SKU: 18011400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-14-teeth-for-belt-width-025635mm-sku-18011400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 13 teeth for belt width 025=6,35mm SKU: 18011300](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-13-teeth-for-belt-width-025635mm-sku-18011300/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 12 teeth for belt width 025=6,35mm SKU: 18011200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-12-teeth-for-belt-width-025635mm-sku-18011200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 11 teeth for belt width 025=6,35mm SKU: 18011100](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-11-teeth-for-belt-width-025635mm-sku-18011100/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 10 teeth for belt width 025=6,35mm SKU: 18011000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-10-teeth-for-belt-width-025635mm-sku-18011000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Fixing plate for timing belts material aluminium HTD 14M belt width 170mm SKU: 17766999](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-170mm-sku-17766999/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium HTD 14M belt width 115mm SKU: 17766799](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-115mm-sku-17766799/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium HTD 14M belt width 85mm SKU: 17766599](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-85mm-sku-17766599/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt HTD 14M width 85mm 14M-85 open length PAZ = Polyamide fabric on tooth side SKU: 17766501](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-85mm-14m-85-open-length-paz-polyamide-fabric-on-tooth-side-sku-17766501/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 14M width 85mm 14M-85 open length SKU: 17766500](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-85mm-14m-85-open-length-sku-17766500/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium HTD 14M belt width 55mm SKU: 17766399](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-55mm-sku-17766399/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt HTD 14M width 55mm 14M-55 open length PAZ = Polyamide fabric on tooth side SKU: 17766301](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-55mm-14m-55-open-length-paz-polyamide-fabric-on-tooth-side-sku-17766301/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 14M width 55mm 14M-55 open length SKU: 17766300](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-55mm-14m-55-open-length-sku-17766300/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium HTD 14M belt width 40mm SKU: 17766199](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-40mm-sku-17766199/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt HTD 14M width 40mm 14M-40 open length PAZ = Polyamide fabric on tooth side SKU: 17766101](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-40mm-14m-40-open-length-paz-polyamide-fabric-on-tooth-side-sku-17766101/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 14M width 40mm 14M-40 open length SKU: 17766100](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-40mm-14m-40-open-length-sku-17766100/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [timing belt HTD-14M, width 85mm, Lw=4578mm, teeth: 327 SKU: 17755100](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw4578mm-teeth-327-sku-17755100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=4326mm, teeth: 309 SKU: 17754800](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw4326mm-teeth-309-sku-17754800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=3850mm, teeth: 275 SKU: 17754500](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw3850mm-teeth-275-sku-17754500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=3500mm, teeth: 250 SKU: 17754200](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw3500mm-teeth-250-sku-17754200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=3150mm, teeth: 225 SKU: 17753900](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw3150mm-teeth-225-sku-17753900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=2800mm, teeth: 200 SKU: 17753600](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw2800mm-teeth-200-sku-17753600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=2590mm, teeth: 185 SKU: 17753200](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw2590mm-teeth-185-sku-17753200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=2450mm, teeth: 175 SKU: 17753000](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw2450mm-teeth-175-sku-17753000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 2310mm 165 teeth SKU: 17752800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-2310mm-165-teeth-sku-17752800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 2100mm 150 teeth SKU: 17752500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-2100mm-150-teeth-sku-17752500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 1890mm 135 teeth SKU: 17752200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1890mm-135-teeth-sku-17752200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 1778mm 127 teeth SKU: 17752000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1778mm-127-teeth-sku-17752000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt 60 MXL 012 75 teeth Lw 152.40mm belt width 3.2mm SKU: 18162500](https://maedler.in/product/neoprene-timing-belt-60-mxl-012-75-teeth-lw-152-40mm-belt-width-3-2mm-sku-18162500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 56 MXL 012 70 teeth Lw 142.24mm belt width 3.2mm SKU: 18162000](https://maedler.in/product/neoprene-timing-belt-56-mxl-012-70-teeth-lw-142-24mm-belt-width-3-2mm-sku-18162000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 52 MXL 012 65 teeth Lw 132.08mm belt width 3.2mm SKU: 18161500](https://maedler.in/product/neoprene-timing-belt-52-mxl-012-65-teeth-lw-132-08mm-belt-width-3-2mm-sku-18161500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 48 MXL 012 60 teeth Lw 121.92mm belt width 3.2mm SKU: 18161000](https://maedler.in/product/neoprene-timing-belt-48-mxl-012-60-teeth-lw-121-92mm-belt-width-3-2mm-sku-18161000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 44 MXL 012 55 teeth Lw 111.76mm belt width 3.2mm SKU: 18160700](https://maedler.in/product/neoprene-timing-belt-44-mxl-012-55-teeth-lw-111-76mm-belt-width-3-2mm-sku-18160700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 40 MXL 012 50 teeth Lw 101.60mm belt width 3.2mm SKU: 18160400](https://maedler.in/product/neoprene-timing-belt-40-mxl-012-50-teeth-lw-101-60mm-belt-width-3-2mm-sku-18160400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 36 MXL 45 teeth Lw 91. 44mm belt width 3.2mm SKU: 18160200](https://maedler.in/product/neoprene-timing-belt-36-mxl-45-teeth-lw-91-44mm-belt-width-3-2mm-sku-18160200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Timing belt pulley MXL material aluminium 72 teeth for belt width 025 SKU: 18137200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-72-teeth-for-belt-width-025-sku-18137200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 60 teeth for belt width 025 SKU: 18136000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-60-teeth-for-belt-width-025-sku-18136000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 48 teeth for belt width 025 SKU: 18134800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-48-teeth-for-belt-width-025-sku-18134800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 44 teeth for belt width 025 SKU: 18134400](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-44-teeth-for-belt-width-025-sku-18134400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 42 teeth for belt width 025 SKU: 18134200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-42-teeth-for-belt-width-025-sku-18134200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 40 teeth for belt width 025 SKU: 18134000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-40-teeth-for-belt-width-025-sku-18134000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 36 teeth for belt width 025 SKU: 18133600](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-36-teeth-for-belt-width-025-sku-18133600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 32 teeth for belt width 025 SKU: 18133200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-32-teeth-for-belt-width-025-sku-18133200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 30 teeth for belt width 025 SKU: 18133000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-30-teeth-for-belt-width-025-sku-18133000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 28 teeth for belt width 025 SKU: 18132800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-28-teeth-for-belt-width-025-sku-18132800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 24 teeth for belt width 025 SKU: 18132400](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-24-teeth-for-belt-width-025-sku-18132400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 22 teeth for belt width 025 SKU: 18132200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-22-teeth-for-belt-width-025-sku-18132200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 20 teeth for belt width 025 SKU: 18132000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-20-teeth-for-belt-width-025-sku-18132000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 18 teeth for belt width 025 SKU: 18131800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-18-teeth-for-belt-width-025-sku-18131800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 16 teeth for belt width 025 SKU: 18131600](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-16-teeth-for-belt-width-025-sku-18131600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 72 teeth for belt width 012 SKU: 18117200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-72-teeth-for-belt-width-012-sku-18117200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 60 teeth for belt width 012 SKU: 18116000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-60-teeth-for-belt-width-012-sku-18116000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 48 teeth for belt width 012 SKU: 18114800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-48-teeth-for-belt-width-012-sku-18114800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 44 teeth for belt width 012 SKU: 18114400](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-44-teeth-for-belt-width-012-sku-18114400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 42 teeth for belt width 012 SKU: 18114200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-42-teeth-for-belt-width-012-sku-18114200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 40 teeth for belt width 012 SKU: 18114000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-40-teeth-for-belt-width-012-sku-18114000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 36 teeth for belt width 012 SKU: 18113600](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-36-teeth-for-belt-width-012-sku-18113600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 32 teeth for belt width 012 SKU: 18113200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-32-teeth-for-belt-width-012-sku-18113200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 30 teeth for belt width 012 SKU: 18113000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-30-teeth-for-belt-width-012-sku-18113000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 28 teeth for belt width 012 SKU: 18112800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-28-teeth-for-belt-width-012-sku-18112800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 24 teeth for belt width 012 SKU: 18112400](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-24-teeth-for-belt-width-012-sku-18112400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 22 teeth for belt width 012 SKU: 18112200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-22-teeth-for-belt-width-012-sku-18112200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 20 teeth for belt width 012 SKU: 18112000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-20-teeth-for-belt-width-012-sku-18112000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 18 teeth for belt width 012 SKU: 18111800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-18-teeth-for-belt-width-012-sku-18111800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 16 teeth for belt width 012 SKU: 18111600](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-16-teeth-for-belt-width-012-sku-18111600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [timing bar XL 1/5" (5.08mm) 72 teeth length 160mm material aluminium SKU: 18097200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-72-teeth-length-160mm-material-aluminium-sku-18097200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 60 teeth length 160mm material aluminium SKU: 18096000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-60-teeth-length-160mm-material-aluminium-sku-18096000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 56 teeth length 160mm material aluminium SKU: 18095600](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-56-teeth-length-160mm-material-aluminium-sku-18095600/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 48 teeth length 160mm material aluminium SKU: 18094800](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-48-teeth-length-160mm-material-aluminium-sku-18094800/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 44 teeth length 160mm material aluminium SKU: 18094400](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-44-teeth-length-160mm-material-aluminium-sku-18094400/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 43 teeth length 160mm material aluminium SKU: 18094300](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-43-teeth-length-160mm-material-aluminium-sku-18094300/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 42 teeth length 160mm material aluminium SKU: 18094200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-42-teeth-length-160mm-material-aluminium-sku-18094200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 41 teeth length 160mm material aluminium SKU: 18094100](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-41-teeth-length-160mm-material-aluminium-sku-18094100/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 40 teeth length 160mm material aluminium SKU: 18094000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-40-teeth-length-160mm-material-aluminium-sku-18094000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 39 teeth length 160mm material aluminium SKU: 18093900](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-39-teeth-length-160mm-material-aluminium-sku-18093900/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 38 teeth length 160mm material aluminium SKU: 18093800](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-38-teeth-length-160mm-material-aluminium-sku-18093800/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 36 teeth length 160mm material aluminium SKU: 18093600](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-36-teeth-length-160mm-material-aluminium-sku-18093600/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 35 teeth length 160mm material aluminium SKU: 18093500](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-35-teeth-length-160mm-material-aluminium-sku-18093500/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 34 teeth length 160mm material aluminium SKU: 18093400](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-34-teeth-length-160mm-material-aluminium-sku-18093400/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 33 teeth length 160mm material aluminium SKU: 18093300](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-33-teeth-length-160mm-material-aluminium-sku-18093300/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 32 teeth length 160mm material aluminium SKU: 18093200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-32-teeth-length-160mm-material-aluminium-sku-18093200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 30 teeth length 160mm material aluminium SKU: 18093000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-30-teeth-length-160mm-material-aluminium-sku-18093000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 29 teeth length 160mm material aluminium SKU: 18092900](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-29-teeth-length-160mm-material-aluminium-sku-18092900/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 28 teeth length 160mm material aluminium SKU: 18092800](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-28-teeth-length-160mm-material-aluminium-sku-18092800/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 27 teeth length 160mm material aluminium SKU: 18092700](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-27-teeth-length-160mm-material-aluminium-sku-18092700/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 26 teeth length 160mm material aluminium SKU: 18092600](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-26-teeth-length-160mm-material-aluminium-sku-18092600/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 25 teeth length 160mm material aluminium SKU: 18092500](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-25-teeth-length-160mm-material-aluminium-sku-18092500/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 24 teeth length 160mm material aluminium SKU: 18092400](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-24-teeth-length-160mm-material-aluminium-sku-18092400/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 23 teeth length 160mm material aluminium SKU: 18092300](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-23-teeth-length-160mm-material-aluminium-sku-18092300/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 22 teeth length 160mm material aluminium SKU: 18092200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-22-teeth-length-160mm-material-aluminium-sku-18092200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 21 teeth length 160mm material aluminium SKU: 18092100](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-21-teeth-length-160mm-material-aluminium-sku-18092100/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 20 teeth length 140mm material aluminium SKU: 18092000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-20-teeth-length-140mm-material-aluminium-sku-18092000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 19 teeth length 140mm material aluminium SKU: 18091900](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-19-teeth-length-140mm-material-aluminium-sku-18091900/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 18 teeth length 140mm material aluminium SKU: 18091800](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-18-teeth-length-140mm-material-aluminium-sku-18091800/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 17 teeth length 140mm material aluminium SKU: 18091700](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-17-teeth-length-140mm-material-aluminium-sku-18091700/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 16 teeth length 140mm material aluminium SKU: 18091600](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-16-teeth-length-140mm-material-aluminium-sku-18091600/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 15 teeth length 140mm material aluminium SKU: 18091500](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-15-teeth-length-140mm-material-aluminium-sku-18091500/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 14 teeth length 140mm material aluminium SKU: 18091400](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-14-teeth-length-140mm-material-aluminium-sku-18091400/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 13 teeth length 140mm material aluminium SKU: 18091300](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-13-teeth-length-140mm-material-aluminium-sku-18091300/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 12 teeth length 140mm material aluminium SKU: 18091200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-12-teeth-length-140mm-material-aluminium-sku-18091200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 11 teeth length 140mm material aluminium SKU: 18091100](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-11-teeth-length-140mm-material-aluminium-sku-18091100/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 10 teeth length 140mm material aluminium SKU: 18091000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-10-teeth-length-140mm-material-aluminium-sku-18091000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [Fixing plate for timing belts material aluminium XL belt width 037=9.53mm SKU: 18089900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-xl-belt-width-0379-53mm-sku-18089900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 260 XL 130 teeth belt width 037=9.53mm SKU: 18085200](https://maedler.in/product/neoprene-timing-belt-260-xl-130-teeth-belt-width-0379-53mm-sku-18085200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 250 XL 125 teeth belt width 037=9.53mm SKU: 18085000](https://maedler.in/product/neoprene-timing-belt-250-xl-125-teeth-belt-width-0379-53mm-sku-18085000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 XL 120 teeth belt width 037=9.53mm SKU: 18084800](https://maedler.in/product/neoprene-timing-belt-240-xl-120-teeth-belt-width-0379-53mm-sku-18084800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 230 XL 115 teeth belt width 037=9.53mm SKU: 18084600](https://maedler.in/product/neoprene-timing-belt-230-xl-115-teeth-belt-width-0379-53mm-sku-18084600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 220 XL 110 teeth belt width 037=9.53mm SKU: 18084400](https://maedler.in/product/neoprene-timing-belt-220-xl-110-teeth-belt-width-0379-53mm-sku-18084400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 XL 105 teeth belt width 037=9.53mm SKU: 18084200](https://maedler.in/product/neoprene-timing-belt-210-xl-105-teeth-belt-width-0379-53mm-sku-18084200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 XL 100 teeth belt width 037=9.53mm SKU: 18084000](https://maedler.in/product/neoprene-timing-belt-200-xl-100-teeth-belt-width-0379-53mm-sku-18084000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 190 XL 95 teeth belt width 037=9.53mm SKU: 18083800](https://maedler.in/product/neoprene-timing-belt-190-xl-95-teeth-belt-width-0379-53mm-sku-18083800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 180 XL 90 teeth belt width 037=9.53mm SKU: 18083600](https://maedler.in/product/neoprene-timing-belt-180-xl-90-teeth-belt-width-0379-53mm-sku-18083600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 170 XL 85 teeth belt width 037=9.53mm SKU: 18083400](https://maedler.in/product/neoprene-timing-belt-170-xl-85-teeth-belt-width-0379-53mm-sku-18083400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 160 XL 80 teeth belt width 037=9.53mm SKU: 18083200](https://maedler.in/product/neoprene-timing-belt-160-xl-80-teeth-belt-width-0379-53mm-sku-18083200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 XL 75 teeth belt width 037=9.53mm SKU: 18083000](https://maedler.in/product/neoprene-timing-belt-150-xl-75-teeth-belt-width-0379-53mm-sku-18083000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 140 XL 70 teeth belt width 037=9.53mm SKU: 18082800](https://maedler.in/product/neoprene-timing-belt-140-xl-70-teeth-belt-width-0379-53mm-sku-18082800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 130 XL 65 teeth belt width 037=9.53mm SKU: 18082600](https://maedler.in/product/neoprene-timing-belt-130-xl-65-teeth-belt-width-0379-53mm-sku-18082600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 120 XL 60 teeth belt width 037=9.53mm SKU: 18082400](https://maedler.in/product/neoprene-timing-belt-120-xl-60-teeth-belt-width-0379-53mm-sku-18082400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 110 XL 55 teeth belt width 037=9.53mm SKU: 18082200](https://maedler.in/product/neoprene-timing-belt-110-xl-55-teeth-belt-width-0379-53mm-sku-18082200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 100 XL 50 teeth belt width 037=9.53mm SKU: 18082000](https://maedler.in/product/neoprene-timing-belt-100-xl-50-teeth-belt-width-0379-53mm-sku-18082000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 90 XL 45 teeth belt width 037=9.53mm SKU: 18081800](https://maedler.in/product/neoprene-timing-belt-90-xl-45-teeth-belt-width-0379-53mm-sku-18081800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 80 XL 40 teeth belt width 037=9.53mm SKU: 18081600](https://maedler.in/product/neoprene-timing-belt-80-xl-40-teeth-belt-width-0379-53mm-sku-18081600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 70 XL 35 teeth belt width 037=9.53mm SKU: 18081400](https://maedler.in/product/neoprene-timing-belt-70-xl-35-teeth-belt-width-0379-53mm-sku-18081400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 60 XL 30 teeth belt width 037=9.53mm SKU: 18081200](https://maedler.in/product/neoprene-timing-belt-60-xl-30-teeth-belt-width-0379-53mm-sku-18081200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt XL=1/5" (5.08mm) width 037=9.53mm open length SKU: 18080000](https://maedler.in/product/neoprene-timing-belt-xl1-5-5-08mm-width-0379-53mm-open-length-sku-18080000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium XL belt width 025=6,35mm SKU: 18069900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-xl-belt-width-025635mm-sku-18069900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 260 XL 025 130 teeth Lw 660.4mm belt width 6.35mm SKU: 18065200](https://maedler.in/product/neoprene-timing-belt-260-xl-025-130-teeth-lw-660-4mm-belt-width-6-35mm-sku-18065200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 250 XL 025 125 teeth Lw 635.0mm belt width 6.35mm SKU: 18065000](https://maedler.in/product/neoprene-timing-belt-250-xl-025-125-teeth-lw-635-0mm-belt-width-6-35mm-sku-18065000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Timing belt pulley L material steel 14 teeth for belt width 075=19.1mm SKU: 18221400](https://maedler.in/product/timing-belt-pulley-l-material-steel-14-teeth-for-belt-width-07519-1mm-sku-18221400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 13 teeth for belt width 075=19.1mm SKU: 18221300](https://maedler.in/product/timing-belt-pulley-l-material-steel-13-teeth-for-belt-width-07519-1mm-sku-18221300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 12 teeth for belt width 075=19.1mm SKU: 18221200](https://maedler.in/product/timing-belt-pulley-l-material-steel-12-teeth-for-belt-width-07519-1mm-sku-18221200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 11 teeth for belt width 075=19.1mm SKU: 18221100](https://maedler.in/product/timing-belt-pulley-l-material-steel-11-teeth-for-belt-width-07519-1mm-sku-18221100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 10 teeth for belt width 075=19.1mm SKU: 18221000](https://maedler.in/product/timing-belt-pulley-l-material-steel-10-teeth-for-belt-width-07519-1mm-sku-18221000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 96 teeth for belt width 050=12.7mm SKU: 18218700](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-96-teeth-for-belt-width-05012-7mm-sku-18218700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 84 teeth for belt width 050=12.7mm SKU: 18218400](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-84-teeth-for-belt-width-05012-7mm-sku-18218400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 72 teeth for belt width 050=12.7mm SKU: 18217200](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-72-teeth-for-belt-width-05012-7mm-sku-18217200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 60 teeth for belt width 050=12.7mm SKU: 18216000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-60-teeth-for-belt-width-05012-7mm-sku-18216000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 56 teeth for belt width 050=12.7mm SKU: 18215600](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-56-teeth-for-belt-width-05012-7mm-sku-18215600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 50 teeth for belt width 050=12.7mm SKU: 18215000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-50-teeth-for-belt-width-05012-7mm-sku-18215000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 48 teeth for belt width 050=12.7mm SKU: 18214800](https://maedler.in/product/timing-belt-pulley-l-material-steel-48-teeth-for-belt-width-05012-7mm-sku-18214800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 44 teeth for belt width 050=12.7mm SKU: 18214400](https://maedler.in/product/timing-belt-pulley-l-material-steel-44-teeth-for-belt-width-05012-7mm-sku-18214400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 40 teeth for belt width 050=12.7mm SKU: 18214000](https://maedler.in/product/timing-belt-pulley-l-material-steel-40-teeth-for-belt-width-05012-7mm-sku-18214000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 36 teeth for belt width 050=12.7mm SKU: 18213600](https://maedler.in/product/timing-belt-pulley-l-material-steel-36-teeth-for-belt-width-05012-7mm-sku-18213600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 35 teeth for belt width 050=12.7mm SKU: 18213500](https://maedler.in/product/timing-belt-pulley-l-material-steel-35-teeth-for-belt-width-05012-7mm-sku-18213500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 34 teeth for belt width 050=12.7mm SKU: 18213400](https://maedler.in/product/timing-belt-pulley-l-material-steel-34-teeth-for-belt-width-05012-7mm-sku-18213400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 33 teeth for belt width 050=12.7mm SKU: 18213300](https://maedler.in/product/timing-belt-pulley-l-material-steel-33-teeth-for-belt-width-05012-7mm-sku-18213300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 32 teeth for belt width 050=12.7mm SKU: 18213200](https://maedler.in/product/timing-belt-pulley-l-material-steel-32-teeth-for-belt-width-05012-7mm-sku-18213200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 30 teeth for belt width 050=12.7mm SKU: 18213000](https://maedler.in/product/timing-belt-pulley-l-material-steel-30-teeth-for-belt-width-05012-7mm-sku-18213000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 28 teeth for belt width 050=12.7mm SKU: 18212800](https://maedler.in/product/timing-belt-pulley-l-material-steel-28-teeth-for-belt-width-05012-7mm-sku-18212800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 27 teeth for belt width 050=12.7mm SKU: 18212700](https://maedler.in/product/timing-belt-pulley-l-material-steel-27-teeth-for-belt-width-05012-7mm-sku-18212700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 26 teeth for belt width 050=12.7mm SKU: 18212600](https://maedler.in/product/timing-belt-pulley-l-material-steel-26-teeth-for-belt-width-05012-7mm-sku-18212600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 25 teeth for belt width 050=12.7mm SKU: 18212500](https://maedler.in/product/timing-belt-pulley-l-material-steel-25-teeth-for-belt-width-05012-7mm-sku-18212500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 24 teeth for belt width 050=12.7mm SKU: 18212400](https://maedler.in/product/timing-belt-pulley-l-material-steel-24-teeth-for-belt-width-05012-7mm-sku-18212400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 23 teeth for belt width 050=12.7mm SKU: 18212300](https://maedler.in/product/timing-belt-pulley-l-material-steel-23-teeth-for-belt-width-05012-7mm-sku-18212300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 22 teeth for belt width 050=12.7mm SKU: 18212200](https://maedler.in/product/timing-belt-pulley-l-material-steel-22-teeth-for-belt-width-05012-7mm-sku-18212200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 21 teeth for belt width 050=12.7mm SKU: 18212100](https://maedler.in/product/timing-belt-pulley-l-material-steel-21-teeth-for-belt-width-05012-7mm-sku-18212100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 20 teeth for belt width 050=12.7mm SKU: 18212000](https://maedler.in/product/timing-belt-pulley-l-material-steel-20-teeth-for-belt-width-05012-7mm-sku-18212000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 19 teeth for belt width 050=12.7mm SKU: 18211900](https://maedler.in/product/timing-belt-pulley-l-material-steel-19-teeth-for-belt-width-05012-7mm-sku-18211900/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 18 teeth for belt width 050=12.7mm SKU: 18211800](https://maedler.in/product/timing-belt-pulley-l-material-steel-18-teeth-for-belt-width-05012-7mm-sku-18211800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 17 teeth for belt width 050=12.7mm SKU: 18211700](https://maedler.in/product/timing-belt-pulley-l-material-steel-17-teeth-for-belt-width-05012-7mm-sku-18211700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 16 teeth for belt width 050=12.7mm SKU: 18211600](https://maedler.in/product/timing-belt-pulley-l-material-steel-16-teeth-for-belt-width-05012-7mm-sku-18211600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 15 teeth for belt width 050=12.7mm SKU: 18211500](https://maedler.in/product/timing-belt-pulley-l-material-steel-15-teeth-for-belt-width-05012-7mm-sku-18211500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 14 teeth for belt width 050=12.7mm SKU: 18211400](https://maedler.in/product/timing-belt-pulley-l-material-steel-14-teeth-for-belt-width-05012-7mm-sku-18211400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 13 teeth for belt width 050=12.7mm SKU: 18211300](https://maedler.in/product/timing-belt-pulley-l-material-steel-13-teeth-for-belt-width-05012-7mm-sku-18211300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 12 teeth for belt width 050=12.7mm SKU: 18211200](https://maedler.in/product/timing-belt-pulley-l-material-steel-12-teeth-for-belt-width-05012-7mm-sku-18211200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 11 teeth for belt width 050=12.7mm SKU: 18211100](https://maedler.in/product/timing-belt-pulley-l-material-steel-11-teeth-for-belt-width-05012-7mm-sku-18211100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 10 teeth for belt width 050=12.7mm SKU: 18211000](https://maedler.in/product/timing-belt-pulley-l-material-steel-10-teeth-for-belt-width-05012-7mm-sku-18211000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [timing bar MXL 0.080" (2.03mm) 72 teeth length 160mm material aluminium SKU: 18197200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-72-teeth-length-160mm-material-aluminium-sku-18197200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 70 teeth length 160mm material aluminium SKU: 18197000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-70-teeth-length-160mm-material-aluminium-sku-18197000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 60 teeth length 160mm material aluminium SKU: 18196000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-60-teeth-length-160mm-material-aluminium-sku-18196000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 50 teeth length 140mm material aluminium SKU: 18195000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-50-teeth-length-140mm-material-aluminium-sku-18195000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 48 teeth length 140mm material aluminium SKU: 18194800](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-48-teeth-length-140mm-material-aluminium-sku-18194800/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 45 teeth length 140mm material aluminium SKU: 18194500](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-45-teeth-length-140mm-material-aluminium-sku-18194500/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 44 teeth length 140mm material aluminium SKU: 18194400](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-44-teeth-length-140mm-material-aluminium-sku-18194400/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 42 teeth length 140mm material aluminium SKU: 18194200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-42-teeth-length-140mm-material-aluminium-sku-18194200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 40 teeth length 140mm material aluminium SKU: 18194000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-40-teeth-length-140mm-material-aluminium-sku-18194000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 36 teeth length 140mm material aluminium SKU: 18193600](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-36-teeth-length-140mm-material-aluminium-sku-18193600/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 34 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18193400](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-34-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18193400/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 32 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18193200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-32-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18193200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 30 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18193000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-30-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18193000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 28 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192800](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-28-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192800/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 26 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192600](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-26-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192600/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 25 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192500](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-25-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192500/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 24 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192400](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-24-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192400/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 22 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-22-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 20 teeth toothed length min. 90mm total length 120mm material aluminium SKU: 18192000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-20-teeth-toothed-length-min-90mm-total-length-120mm-material-aluminium-sku-18192000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 18 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191800](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-18-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191800/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 16 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191600](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-16-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191600/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 15 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191500](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-15-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191500/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 14 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191400](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-14-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191400/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 12 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-12-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [Neoprene timing belt 256 MXL 320 teeth Lw 650.24mm belt width 025 SKU: 18189500](https://maedler.in/product/neoprene-timing-belt-256-mxl-320-teeth-lw-650-24mm-belt-width-025-sku-18189500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 MXL 300 teeth Lw 609.60mm belt width 025 SKU: 18189000](https://maedler.in/product/neoprene-timing-belt-240-mxl-300-teeth-lw-609-60mm-belt-width-025-sku-18189000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 224 MXL 280 teeth Lw 568.96mm belt width 025 SKU: 18188500](https://maedler.in/product/neoprene-timing-belt-224-mxl-280-teeth-lw-568-96mm-belt-width-025-sku-18188500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 MXL 250 teeth Lw 508.00mm belt width 025 SKU: 18188000](https://maedler.in/product/neoprene-timing-belt-200-mxl-250-teeth-lw-508-00mm-belt-width-025-sku-18188000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 180 MXL 225 teeth Lw 457.20mm belt width 025 SKU: 18187500](https://maedler.in/product/neoprene-timing-belt-180-mxl-225-teeth-lw-457-20mm-belt-width-025-sku-18187500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 160 MXL 200 teeth Lw 406.40mm belt width 025 SKU: 18187000](https://maedler.in/product/neoprene-timing-belt-160-mxl-200-teeth-lw-406-40mm-belt-width-025-sku-18187000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 140 MXL 175 teeth Lw 355.60mm belt width 025 SKU: 18186500](https://maedler.in/product/neoprene-timing-belt-140-mxl-175-teeth-lw-355-60mm-belt-width-025-sku-18186500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 MXL 155 teeth Lw 314.96mm belt width 025 SKU: 18186000](https://maedler.in/product/neoprene-timing-belt-124-mxl-155-teeth-lw-314-96mm-belt-width-025-sku-18186000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 112 MXL 140 teeth Lw 284.48mm belt width 025 SKU: 18185500](https://maedler.in/product/neoprene-timing-belt-112-mxl-140-teeth-lw-284-48mm-belt-width-025-sku-18185500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 100 MXL 125 teeth Lw 254.00mm belt width 025 SKU: 18185000](https://maedler.in/product/neoprene-timing-belt-100-mxl-125-teeth-lw-254-00mm-belt-width-025-sku-18185000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 88 MXL 110 teeth Lw 223.52mm belt width 025 SKU: 18184500](https://maedler.in/product/neoprene-timing-belt-88-mxl-110-teeth-lw-223-52mm-belt-width-025-sku-18184500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 80 MXL 100 teeth Lw 203.20mm belt width 025 SKU: 18184000](https://maedler.in/product/neoprene-timing-belt-80-mxl-100-teeth-lw-203-20mm-belt-width-025-sku-18184000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 72 MXL 90 teeth Lw 182.88mm belt width 025 SKU: 18183500](https://maedler.in/product/neoprene-timing-belt-72-mxl-90-teeth-lw-182-88mm-belt-width-025-sku-18183500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 68 MXL 85 teeth Lw 172.72mm belt width 025 SKU: 18183200](https://maedler.in/product/neoprene-timing-belt-68-mxl-85-teeth-lw-172-72mm-belt-width-025-sku-18183200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 64 MXL 80 teeth Lw 162.56mm belt width 025 SKU: 18183000](https://maedler.in/product/neoprene-timing-belt-64-mxl-80-teeth-lw-162-56mm-belt-width-025-sku-18183000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 60 MXL 75 teeth Lw 152.40mm belt width 025 SKU: 18182500](https://maedler.in/product/neoprene-timing-belt-60-mxl-75-teeth-lw-152-40mm-belt-width-025-sku-18182500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 56 MXL 70 teeth Lw 142.24mm belt width 025 SKU: 18182000](https://maedler.in/product/neoprene-timing-belt-56-mxl-70-teeth-lw-142-24mm-belt-width-025-sku-18182000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 52 MXL 65 teeth Lw 132.08mm belt width 025 SKU: 18181500](https://maedler.in/product/neoprene-timing-belt-52-mxl-65-teeth-lw-132-08mm-belt-width-025-sku-18181500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 48 MXL 60 teeth Lw 121.92mm belt width 025 SKU: 18181000](https://maedler.in/product/neoprene-timing-belt-48-mxl-60-teeth-lw-121-92mm-belt-width-025-sku-18181000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 44 MXL 55 teeth Lw 111.76mm belt width 025 SKU: 18180700](https://maedler.in/product/neoprene-timing-belt-44-mxl-55-teeth-lw-111-76mm-belt-width-025-sku-18180700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 40 MXL 50 teeth Lw 101.60mm belt width 025 SKU: 18180400](https://maedler.in/product/neoprene-timing-belt-40-mxl-50-teeth-lw-101-60mm-belt-width-025-sku-18180400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 36 MXL 45 teeth Lw 91. 44mm belt width 025 SKU: 18180200](https://maedler.in/product/neoprene-timing-belt-36-mxl-45-teeth-lw-91-44mm-belt-width-025-sku-18180200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 256 MXL 012 320 teeth Lw 650.24mm belt width 3.2mm SKU: 18169500](https://maedler.in/product/neoprene-timing-belt-256-mxl-012-320-teeth-lw-650-24mm-belt-width-3-2mm-sku-18169500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 MXL 012 300 teeth Lw 609.60mm belt width 3.2mm SKU: 18169000](https://maedler.in/product/neoprene-timing-belt-240-mxl-012-300-teeth-lw-609-60mm-belt-width-3-2mm-sku-18169000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 MXL 012 280 teeth Lw 568.96mm belt width 3.2mm SKU: 18168500](https://maedler.in/product/neoprene-timing-belt-200-mxl-012-280-teeth-lw-568-96mm-belt-width-3-2mm-sku-18168500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 MXL 012 250 teeth Lw 508.00mm belt width 3.2mm SKU: 18168000](https://maedler.in/product/neoprene-timing-belt-200-mxl-012-250-teeth-lw-508-00mm-belt-width-3-2mm-sku-18168000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 180 MXL 012 225 teeth Lw 457.20mm belt width 3.2mm SKU: 18167500](https://maedler.in/product/neoprene-timing-belt-180-mxl-012-225-teeth-lw-457-20mm-belt-width-3-2mm-sku-18167500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 160 MXL 012 200 teeth Lw 406.40mm belt width 3.2mm SKU: 18167000](https://maedler.in/product/neoprene-timing-belt-160-mxl-012-200-teeth-lw-406-40mm-belt-width-3-2mm-sku-18167000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 140 MXL 012 175 teeth Lw 355.60mm belt width 3.2mm SKU: 18166500](https://maedler.in/product/neoprene-timing-belt-140-mxl-012-175-teeth-lw-355-60mm-belt-width-3-2mm-sku-18166500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 MXL 012 155 teeth Lw 314.96mm belt width 3.2mm SKU: 18166000](https://maedler.in/product/neoprene-timing-belt-124-mxl-012-155-teeth-lw-314-96mm-belt-width-3-2mm-sku-18166000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 112 MXL 012 140 teeth Lw 284.48mm belt width 3.2mm SKU: 18165500](https://maedler.in/product/neoprene-timing-belt-112-mxl-012-140-teeth-lw-284-48mm-belt-width-3-2mm-sku-18165500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 100 MXL 012 125 teeth Lw 254.00mm belt width 3.2mm SKU: 18165000](https://maedler.in/product/neoprene-timing-belt-100-mxl-012-125-teeth-lw-254-00mm-belt-width-3-2mm-sku-18165000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 88 MXL 012 110 teeth Lw 223.52mm belt width 3.2mm SKU: 18164500](https://maedler.in/product/neoprene-timing-belt-88-mxl-012-110-teeth-lw-223-52mm-belt-width-3-2mm-sku-18164500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 80 MXL 012 100 teeth Lw 203.20mm belt width 3.2mm SKU: 18164000](https://maedler.in/product/neoprene-timing-belt-80-mxl-012-100-teeth-lw-203-20mm-belt-width-3-2mm-sku-18164000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 72 MXL 012 90 teeth Lw 182.88mm belt width 3.2mm SKU: 18163500](https://maedler.in/product/neoprene-timing-belt-72-mxl-012-90-teeth-lw-182-88mm-belt-width-3-2mm-sku-18163500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 68 MXL 012 85 teeth Lw 172.72mm belt width 3.2mm SKU: 18163200](https://maedler.in/product/neoprene-timing-belt-68-mxl-012-85-teeth-lw-172-72mm-belt-width-3-2mm-sku-18163200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 64 MXL 012 80 teeth Lw 162.56mm belt width 3.2mm SKU: 18163000](https://maedler.in/product/neoprene-timing-belt-64-mxl-012-80-teeth-lw-162-56mm-belt-width-3-2mm-sku-18163000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 L 104 teeth belt width 075=19.1mm SKU: 18273900](https://maedler.in/product/neoprene-timing-belt-390-l-104-teeth-belt-width-07519-1mm-sku-18273900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 367 L 98 teeth belt width 075=19.1mm SKU: 18273700](https://maedler.in/product/neoprene-timing-belt-367-l-98-teeth-belt-width-07519-1mm-sku-18273700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 345 L 92 teeth belt width 075=19.1mm SKU: 18273500](https://maedler.in/product/neoprene-timing-belt-345-l-92-teeth-belt-width-07519-1mm-sku-18273500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 322 L 86 teeth belt width 075=19.1mm SKU: 18273200](https://maedler.in/product/neoprene-timing-belt-322-l-86-teeth-belt-width-07519-1mm-sku-18273200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 L 80 teeth belt width 075=19.1mm SKU: 18273000](https://maedler.in/product/neoprene-timing-belt-300-l-80-teeth-belt-width-07519-1mm-sku-18273000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 285 L 76 teeth belt width 075=19.1mm SKU: 18272900](https://maedler.in/product/neoprene-timing-belt-285-l-76-teeth-belt-width-07519-1mm-sku-18272900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 L 72 teeth belt width 075=19.1mm SKU: 18272700](https://maedler.in/product/neoprene-timing-belt-270-l-72-teeth-belt-width-07519-1mm-sku-18272700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 255 L 68 teeth belt width 075=19.1mm SKU: 18272600](https://maedler.in/product/neoprene-timing-belt-255-l-68-teeth-belt-width-07519-1mm-sku-18272600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 L 64 teeth belt width 075=19.1mm SKU: 18272400](https://maedler.in/product/neoprene-timing-belt-240-l-64-teeth-belt-width-07519-1mm-sku-18272400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 225 L 60 teeth belt width 075=19.1mm SKU: 18272200](https://maedler.in/product/neoprene-timing-belt-225-l-60-teeth-belt-width-07519-1mm-sku-18272200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 L 56 teeth belt width 075=19.1mm SKU: 18272100](https://maedler.in/product/neoprene-timing-belt-210-l-56-teeth-belt-width-07519-1mm-sku-18272100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 187 L 50 teeth belt width 075=19.1mm SKU: 18271900](https://maedler.in/product/neoprene-timing-belt-187-l-50-teeth-belt-width-07519-1mm-sku-18271900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 L 40 teeth belt width 075=19.1mm SKU: 18271500](https://maedler.in/product/neoprene-timing-belt-150-l-40-teeth-belt-width-07519-1mm-sku-18271500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 L 33 teeth belt width 075=19.1mm SKU: 18271200](https://maedler.in/product/neoprene-timing-belt-124-l-33-teeth-belt-width-07519-1mm-sku-18271200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt L=3/8" (9.525mm) width 075=19.1mm open length SKU: 18270000](https://maedler.in/product/neoprene-timing-belt-l3-8-9-525mm-width-07519-1mm-open-length-sku-18270000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium L belt width 050=12.7mm SKU: 18269900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-l-belt-width-05012-7mm-sku-18269900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 600 L 160 teeth belt width 050=12.7mm SKU: 18266000](https://maedler.in/product/neoprene-timing-belt-600-l-160-teeth-belt-width-05012-7mm-sku-18266000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 L 144 teeth belt width 050=12.7mm SKU: 18265400](https://maedler.in/product/neoprene-timing-belt-540-l-144-teeth-belt-width-05012-7mm-sku-18265400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 L 136 teeth belt width 050=12.7mm SKU: 18265100](https://maedler.in/product/neoprene-timing-belt-510-l-136-teeth-belt-width-05012-7mm-sku-18265100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 L 128 teeth belt width 050=12.7mm SKU: 18264800](https://maedler.in/product/neoprene-timing-belt-480-l-128-teeth-belt-width-05012-7mm-sku-18264800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 L 120 teeth belt width 050=12.7mm SKU: 18264500](https://maedler.in/product/neoprene-timing-belt-450-l-120-teeth-belt-width-05012-7mm-sku-18264500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 L 112 teeth belt width 050=12.7mm SKU: 18264200](https://maedler.in/product/neoprene-timing-belt-420-l-112-teeth-belt-width-05012-7mm-sku-18264200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 L 104 teeth belt width 050=12.7mm SKU: 18263900](https://maedler.in/product/neoprene-timing-belt-390-l-104-teeth-belt-width-05012-7mm-sku-18263900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 367 L 98 teeth belt width 050=12.7mm SKU: 18263700](https://maedler.in/product/neoprene-timing-belt-367-l-98-teeth-belt-width-05012-7mm-sku-18263700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 345 L 92 teeth belt width 050=12.7mm SKU: 18263500](https://maedler.in/product/neoprene-timing-belt-345-l-92-teeth-belt-width-05012-7mm-sku-18263500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 322 L 86 teeth belt width 050=12.7mm SKU: 18263200](https://maedler.in/product/neoprene-timing-belt-322-l-86-teeth-belt-width-05012-7mm-sku-18263200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 L 80 teeth belt width 050=12.7mm SKU: 18263000](https://maedler.in/product/neoprene-timing-belt-300-l-80-teeth-belt-width-05012-7mm-sku-18263000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 285 L 76 teeth belt width 050=12.7mm SKU: 18262900](https://maedler.in/product/neoprene-timing-belt-285-l-76-teeth-belt-width-05012-7mm-sku-18262900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 L 72 teeth belt width 050=12.7mm SKU: 18262700](https://maedler.in/product/neoprene-timing-belt-270-l-72-teeth-belt-width-05012-7mm-sku-18262700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 255 L 68 teeth belt width 050=12.7mm SKU: 18262600](https://maedler.in/product/neoprene-timing-belt-255-l-68-teeth-belt-width-05012-7mm-sku-18262600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 L 64 teeth belt width 050=12.7mm SKU: 18262400](https://maedler.in/product/neoprene-timing-belt-240-l-64-teeth-belt-width-05012-7mm-sku-18262400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 225 L 60 teeth belt width 050=12.7mm SKU: 18262200](https://maedler.in/product/neoprene-timing-belt-225-l-60-teeth-belt-width-05012-7mm-sku-18262200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 L 56 teeth belt width 050=12.7mm SKU: 18262100](https://maedler.in/product/neoprene-timing-belt-210-l-56-teeth-belt-width-05012-7mm-sku-18262100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 187 L 50 teeth belt width 050=12.7mm SKU: 18261900](https://maedler.in/product/neoprene-timing-belt-187-l-50-teeth-belt-width-05012-7mm-sku-18261900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 L 40 teeth belt width 050=12.7mm SKU: 18261500](https://maedler.in/product/neoprene-timing-belt-150-l-40-teeth-belt-width-05012-7mm-sku-18261500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 L 33 teeth belt width 050=12.7mm SKU: 18261200](https://maedler.in/product/neoprene-timing-belt-124-l-33-teeth-belt-width-05012-7mm-sku-18261200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt L=3/8" (9.525mm) width 050=12.7mm open length SKU: 18260000](https://maedler.in/product/neoprene-timing-belt-l3-8-9-525mm-width-05012-7mm-open-length-sku-18260000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Timing belt pulley L material grey cast iron 96 teeth for belt width 100=25.4mm SKU: 18238700](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-96-teeth-for-belt-width-10025-4mm-sku-18238700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 84 teeth for belt width 100=25.4mm SKU: 18238400](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-84-teeth-for-belt-width-10025-4mm-sku-18238400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 72 teeth for belt width 100=25.4mm SKU: 18237200](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-72-teeth-for-belt-width-10025-4mm-sku-18237200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 60 teeth for belt width 100=25.4mm SKU: 18236000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-60-teeth-for-belt-width-10025-4mm-sku-18236000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 56 teeth for belt width 100=25.4mm SKU: 18235600](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-56-teeth-for-belt-width-10025-4mm-sku-18235600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 50 teeth for belt width 100=25.4mm SKU: 18235000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-50-teeth-for-belt-width-10025-4mm-sku-18235000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 48 teeth for belt width 100=25.4mm SKU: 18234800](https://maedler.in/product/timing-belt-pulley-l-material-steel-48-teeth-for-belt-width-10025-4mm-sku-18234800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 44 teeth for belt width 100=25.4mm SKU: 18234400](https://maedler.in/product/timing-belt-pulley-l-material-steel-44-teeth-for-belt-width-10025-4mm-sku-18234400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 40 teeth for belt width 100=25.4mm SKU: 18234000](https://maedler.in/product/timing-belt-pulley-l-material-steel-40-teeth-for-belt-width-10025-4mm-sku-18234000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 36 teeth for belt width 100=25.4mm SKU: 18233600](https://maedler.in/product/timing-belt-pulley-l-material-steel-36-teeth-for-belt-width-10025-4mm-sku-18233600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 35 teeth for belt width 100=25.4mm SKU: 18233500](https://maedler.in/product/timing-belt-pulley-l-material-steel-35-teeth-for-belt-width-10025-4mm-sku-18233500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 34 teeth for belt width 100=25.4mm SKU: 18233400](https://maedler.in/product/timing-belt-pulley-l-material-steel-34-teeth-for-belt-width-10025-4mm-sku-18233400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 33 teeth for belt width 100=25.4mm SKU: 18233300](https://maedler.in/product/timing-belt-pulley-l-material-steel-33-teeth-for-belt-width-10025-4mm-sku-18233300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 32 teeth for belt width 100=25.4mm SKU: 18233200](https://maedler.in/product/timing-belt-pulley-l-material-steel-32-teeth-for-belt-width-10025-4mm-sku-18233200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 30 teeth for belt width 100=25.4mm SKU: 18233000](https://maedler.in/product/timing-belt-pulley-l-material-steel-30-teeth-for-belt-width-10025-4mm-sku-18233000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 28 teeth for belt width 100=25.4mm SKU: 18232800](https://maedler.in/product/timing-belt-pulley-l-material-steel-28-teeth-for-belt-width-10025-4mm-sku-18232800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 27 teeth for belt width 100=25.4mm SKU: 18232700](https://maedler.in/product/timing-belt-pulley-l-material-steel-27-teeth-for-belt-width-10025-4mm-sku-18232700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 26 teeth for belt width 100=25.4mm SKU: 18232600](https://maedler.in/product/timing-belt-pulley-l-material-steel-26-teeth-for-belt-width-10025-4mm-sku-18232600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 25 teeth for belt width 100=25.4mm SKU: 18232500](https://maedler.in/product/timing-belt-pulley-l-material-steel-25-teeth-for-belt-width-10025-4mm-sku-18232500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 24 teeth for belt width 100=25.4mm SKU: 18232400](https://maedler.in/product/timing-belt-pulley-l-material-steel-24-teeth-for-belt-width-10025-4mm-sku-18232400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 23 teeth for belt width 100=25.4mm SKU: 18232300](https://maedler.in/product/timing-belt-pulley-l-material-steel-23-teeth-for-belt-width-10025-4mm-sku-18232300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 22 teeth for belt width 100=25.4mm SKU: 18232200](https://maedler.in/product/timing-belt-pulley-l-material-steel-22-teeth-for-belt-width-10025-4mm-sku-18232200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 21 teeth for belt width 100=25.4mm SKU: 18232100](https://maedler.in/product/timing-belt-pulley-l-material-steel-21-teeth-for-belt-width-10025-4mm-sku-18232100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 20 teeth for belt width 100=25.4mm SKU: 18232000](https://maedler.in/product/timing-belt-pulley-l-material-steel-20-teeth-for-belt-width-10025-4mm-sku-18232000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 19 teeth for belt width 100=25.4mm SKU: 18231900](https://maedler.in/product/timing-belt-pulley-l-material-steel-19-teeth-for-belt-width-10025-4mm-sku-18231900/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 18 teeth for belt width 100=25.4mm SKU: 18231800](https://maedler.in/product/timing-belt-pulley-l-material-steel-18-teeth-for-belt-width-10025-4mm-sku-18231800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 17 teeth for belt width 100=25.4mm SKU: 18231700](https://maedler.in/product/timing-belt-pulley-l-material-steel-17-teeth-for-belt-width-10025-4mm-sku-18231700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 16 teeth for belt width 100=25.4mm SKU: 18231600](https://maedler.in/product/timing-belt-pulley-l-material-steel-16-teeth-for-belt-width-10025-4mm-sku-18231600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 15 teeth for belt width 100=25.4mm SKU: 18231500](https://maedler.in/product/timing-belt-pulley-l-material-steel-15-teeth-for-belt-width-10025-4mm-sku-18231500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 14 teeth for belt width 100=25.4mm SKU: 18231400](https://maedler.in/product/timing-belt-pulley-l-material-steel-14-teeth-for-belt-width-10025-4mm-sku-18231400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 13 teeth for belt width 100=25.4mm SKU: 18231300](https://maedler.in/product/timing-belt-pulley-l-material-steel-13-teeth-for-belt-width-10025-4mm-sku-18231300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 12 teeth for belt width 100=25.4mm SKU: 18231200](https://maedler.in/product/timing-belt-pulley-l-material-steel-12-teeth-for-belt-width-10025-4mm-sku-18231200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 11 teeth for belt width 100=25.4mm SKU: 18231100](https://maedler.in/product/timing-belt-pulley-l-material-steel-11-teeth-for-belt-width-10025-4mm-sku-18231100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 10 teeth for belt width 100=25.4mm SKU: 18231000](https://maedler.in/product/timing-belt-pulley-l-material-steel-10-teeth-for-belt-width-10025-4mm-sku-18231000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 96 teeth for belt width 075=19.1mm SKU: 18228700](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-96-teeth-for-belt-width-07519-1mm-sku-18228700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 84 teeth for belt width 075=19.1mm SKU: 18228400](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-84-teeth-for-belt-width-07519-1mm-sku-18228400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 72 teeth for belt width 075=19.1mm SKU: 18227200](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-72-teeth-for-belt-width-07519-1mm-sku-18227200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 60 teeth for belt width 075=19.1mm SKU: 18226000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-60-teeth-for-belt-width-07519-1mm-sku-18226000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 56 teeth for belt width 075=19.1mm SKU: 18225600](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-56-teeth-for-belt-width-07519-1mm-sku-18225600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 50 teeth for belt width 075=19.1mm SKU: 18225000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-50-teeth-for-belt-width-07519-1mm-sku-18225000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 48 teeth for belt width 075=19.1mm SKU: 18224800](https://maedler.in/product/timing-belt-pulley-l-material-steel-48-teeth-for-belt-width-07519-1mm-sku-18224800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 44 teeth for belt width 075=19.1mm SKU: 18224400](https://maedler.in/product/timing-belt-pulley-l-material-steel-44-teeth-for-belt-width-07519-1mm-sku-18224400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 40 teeth for belt width 075=19.1mm SKU: 18224000](https://maedler.in/product/timing-belt-pulley-l-material-steel-40-teeth-for-belt-width-07519-1mm-sku-18224000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 36 teeth for belt width 075=19.1mm SKU: 18223600](https://maedler.in/product/timing-belt-pulley-l-material-steel-36-teeth-for-belt-width-07519-1mm-sku-18223600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 35 teeth for belt width 075=19.1mm SKU: 18223500](https://maedler.in/product/timing-belt-pulley-l-material-steel-35-teeth-for-belt-width-07519-1mm-sku-18223500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 34 teeth for belt width 075=19.1mm SKU: 18223400](https://maedler.in/product/timing-belt-pulley-l-material-steel-34-teeth-for-belt-width-07519-1mm-sku-18223400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 33 teeth for belt width 075=19.1mm SKU: 18223300](https://maedler.in/product/timing-belt-pulley-l-material-steel-33-teeth-for-belt-width-07519-1mm-sku-18223300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 32 teeth for belt width 075=19.1mm SKU: 18223200](https://maedler.in/product/timing-belt-pulley-l-material-steel-32-teeth-for-belt-width-07519-1mm-sku-18223200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 30 teeth for belt width 075=19.1mm SKU: 18223000](https://maedler.in/product/timing-belt-pulley-l-material-steel-30-teeth-for-belt-width-07519-1mm-sku-18223000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 28 teeth for belt width 075=19.1mm SKU: 18222800](https://maedler.in/product/timing-belt-pulley-l-material-steel-28-teeth-for-belt-width-07519-1mm-sku-18222800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 27 teeth for belt width 075=19.1mm SKU: 18222700](https://maedler.in/product/timing-belt-pulley-l-material-steel-27-teeth-for-belt-width-07519-1mm-sku-18222700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 26 teeth for belt width 075=19.1mm SKU: 18222600](https://maedler.in/product/timing-belt-pulley-l-material-steel-26-teeth-for-belt-width-07519-1mm-sku-18222600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 25 teeth for belt width 075=19.1mm SKU: 18222500](https://maedler.in/product/timing-belt-pulley-l-material-steel-25-teeth-for-belt-width-07519-1mm-sku-18222500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 24 teeth for belt width 075=19.1mm SKU: 18222400](https://maedler.in/product/timing-belt-pulley-l-material-steel-24-teeth-for-belt-width-07519-1mm-sku-18222400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 23 teeth for belt width 075=19.1mm SKU: 18222300](https://maedler.in/product/timing-belt-pulley-l-material-steel-23-teeth-for-belt-width-07519-1mm-sku-18222300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 22 teeth for belt width 075=19.1mm SKU: 18222200](https://maedler.in/product/timing-belt-pulley-l-material-steel-22-teeth-for-belt-width-07519-1mm-sku-18222200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 21 teeth for belt width 075=19.1mm SKU: 18222100](https://maedler.in/product/timing-belt-pulley-l-material-steel-21-teeth-for-belt-width-07519-1mm-sku-18222100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 20 teeth for belt width 075=19.1mm SKU: 18222000](https://maedler.in/product/timing-belt-pulley-l-material-steel-20-teeth-for-belt-width-07519-1mm-sku-18222000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 19 teeth for belt width 075=19.1mm SKU: 18221900](https://maedler.in/product/timing-belt-pulley-l-material-steel-19-teeth-for-belt-width-07519-1mm-sku-18221900/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 18 teeth for belt width 075=19.1mm SKU: 18221800](https://maedler.in/product/timing-belt-pulley-l-material-steel-18-teeth-for-belt-width-07519-1mm-sku-18221800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 17 teeth for belt width 075=19.1mm SKU: 18221700](https://maedler.in/product/timing-belt-pulley-l-material-steel-17-teeth-for-belt-width-07519-1mm-sku-18221700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 16 teeth for belt width 075=19.1mm SKU: 18221600](https://maedler.in/product/timing-belt-pulley-l-material-steel-16-teeth-for-belt-width-07519-1mm-sku-18221600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 15 teeth for belt width 075=19.1mm SKU: 18221500](https://maedler.in/product/timing-belt-pulley-l-material-steel-15-teeth-for-belt-width-07519-1mm-sku-18221500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material grey cast iron 60 teeth for belt width 100=25.4mm SKU: 18416000](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-60-teeth-for-belt-width-10025-4mm-sku-18416000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 58 teeth for belt width 100=25.4mm SKU: 18415800](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-58-teeth-for-belt-width-10025-4mm-sku-18415800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 50 teeth for belt width 100=25.4mm SKU: 18415000](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-50-teeth-for-belt-width-10025-4mm-sku-18415000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 48 teeth for belt width 100=25.4mm SKU: 18414800](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-48-teeth-for-belt-width-10025-4mm-sku-18414800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 44 teeth for belt width 100=25.4mm SKU: 18414400](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-44-teeth-for-belt-width-10025-4mm-sku-18414400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 40 teeth for belt width 100=25.4mm SKU: 18414000](https://maedler.in/product/timing-belt-pulley-h-material-steel-40-teeth-for-belt-width-10025-4mm-sku-18414000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 38 teeth for belt width 100=25.4mm SKU: 18413800](https://maedler.in/product/timing-belt-pulley-h-material-steel-38-teeth-for-belt-width-10025-4mm-sku-18413800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 36 teeth for belt width 100=25.4mm SKU: 18413600](https://maedler.in/product/timing-belt-pulley-h-material-steel-36-teeth-for-belt-width-10025-4mm-sku-18413600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 35 teeth for belt width 100=25.4mm SKU: 18413500](https://maedler.in/product/timing-belt-pulley-h-material-steel-35-teeth-for-belt-width-10025-4mm-sku-18413500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 34 teeth for belt width 100=25.4mm SKU: 18413400](https://maedler.in/product/timing-belt-pulley-h-material-steel-34-teeth-for-belt-width-10025-4mm-sku-18413400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 33 teeth for belt width 100=25.4mm SKU: 18413300](https://maedler.in/product/timing-belt-pulley-h-material-steel-33-teeth-for-belt-width-10025-4mm-sku-18413300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 32 teeth for belt width 100=25.4mm SKU: 18413200](https://maedler.in/product/timing-belt-pulley-h-material-steel-32-teeth-for-belt-width-10025-4mm-sku-18413200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 30 teeth for belt width 100=25.4mm SKU: 18413000](https://maedler.in/product/timing-belt-pulley-h-material-steel-30-teeth-for-belt-width-10025-4mm-sku-18413000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 28 teeth for belt width 100=25.4mm SKU: 18412800](https://maedler.in/product/timing-belt-pulley-h-material-steel-28-teeth-for-belt-width-10025-4mm-sku-18412800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 27 teeth for belt width 100=25.4mm SKU: 18412700](https://maedler.in/product/timing-belt-pulley-h-material-steel-27-teeth-for-belt-width-10025-4mm-sku-18412700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 26 teeth for belt width 100=25.4mm SKU: 18412600](https://maedler.in/product/timing-belt-pulley-h-material-steel-26-teeth-for-belt-width-10025-4mm-sku-18412600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 25 teeth for belt width 100=25.4mm SKU: 18412500](https://maedler.in/product/timing-belt-pulley-h-material-steel-25-teeth-for-belt-width-10025-4mm-sku-18412500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 24 teeth for belt width 100=25.4mm SKU: 18412400](https://maedler.in/product/timing-belt-pulley-h-material-steel-24-teeth-for-belt-width-10025-4mm-sku-18412400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 23 teeth for belt width 100=25.4mm SKU: 18412300](https://maedler.in/product/timing-belt-pulley-h-material-steel-23-teeth-for-belt-width-10025-4mm-sku-18412300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 22 teeth for belt width 100=25.4mm SKU: 18412200](https://maedler.in/product/timing-belt-pulley-h-material-steel-22-teeth-for-belt-width-10025-4mm-sku-18412200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 21 teeth for belt width 100=25.4mm SKU: 18412100](https://maedler.in/product/timing-belt-pulley-h-material-steel-21-teeth-for-belt-width-10025-4mm-sku-18412100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 20 teeth for belt width 100=25.4mm SKU: 18412000](https://maedler.in/product/timing-belt-pulley-h-material-steel-20-teeth-for-belt-width-10025-4mm-sku-18412000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 19 teeth for belt width 100=25.4mm SKU: 18411900](https://maedler.in/product/timing-belt-pulley-h-material-steel-19-teeth-for-belt-width-10025-4mm-sku-18411900/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 18 teeth for belt width 100=25.4mm SKU: 18411800](https://maedler.in/product/timing-belt-pulley-h-material-steel-18-teeth-for-belt-width-10025-4mm-sku-18411800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 17 teeth for belt width 100=25.4mm SKU: 18411700](https://maedler.in/product/timing-belt-pulley-h-material-steel-17-teeth-for-belt-width-10025-4mm-sku-18411700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 16 teeth for belt width 100=25.4mm SKU: 18411600](https://maedler.in/product/timing-belt-pulley-h-material-steel-16-teeth-for-belt-width-10025-4mm-sku-18411600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 15 teeth for belt width 100=25.4mm SKU: 18411500](https://maedler.in/product/timing-belt-pulley-h-material-steel-15-teeth-for-belt-width-10025-4mm-sku-18411500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 14 teeth for belt width 100=25.4mm SKU: 18411400](https://maedler.in/product/timing-belt-pulley-h-material-steel-14-teeth-for-belt-width-10025-4mm-sku-18411400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 50 teeth for belt width 075=19.1mm SKU: 18405000](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-50-teeth-for-belt-width-07519-1mm-sku-18405000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material grey cast iron 48 teeth for belt width 075=19.1mm SKU: 18404800](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-48-teeth-for-belt-width-07519-1mm-sku-18404800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material grey cast iron 44 teeth for belt width 075=19.1mm SKU: 18404400](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-44-teeth-for-belt-width-07519-1mm-sku-18404400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 40 teeth for belt width 075=19.1mm SKU: 18404000](https://maedler.in/product/timing-belt-pulley-h-material-steel-40-teeth-for-belt-width-07519-1mm-sku-18404000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 38 teeth for belt width 075=19.1mm SKU: 18403800](https://maedler.in/product/timing-belt-pulley-h-material-steel-38-teeth-for-belt-width-07519-1mm-sku-18403800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 36 teeth for belt width 075=19.1mm SKU: 18403600](https://maedler.in/product/timing-belt-pulley-h-material-steel-36-teeth-for-belt-width-07519-1mm-sku-18403600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 35 teeth for belt width 075=19.1mm SKU: 18403500](https://maedler.in/product/timing-belt-pulley-h-material-steel-35-teeth-for-belt-width-07519-1mm-sku-18403500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 34 teeth for belt width 075=19.1mm SKU: 18403400](https://maedler.in/product/timing-belt-pulley-h-material-steel-34-teeth-for-belt-width-07519-1mm-sku-18403400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 33 teeth for belt width 075=19.1mm SKU: 18403300](https://maedler.in/product/timing-belt-pulley-h-material-steel-33-teeth-for-belt-width-07519-1mm-sku-18403300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 32 teeth for belt width 075=19.1mm SKU: 18403200](https://maedler.in/product/timing-belt-pulley-h-material-steel-32-teeth-for-belt-width-07519-1mm-sku-18403200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 30 teeth for belt width 075=19.1mm SKU: 18403000](https://maedler.in/product/timing-belt-pulley-h-material-steel-30-teeth-for-belt-width-07519-1mm-sku-18403000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 28 teeth for belt width 075=19.1mm SKU: 18402800](https://maedler.in/product/timing-belt-pulley-h-material-steel-28-teeth-for-belt-width-07519-1mm-sku-18402800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 27 teeth for belt width 075=19.1mm SKU: 18402700](https://maedler.in/product/timing-belt-pulley-h-material-steel-27-teeth-for-belt-width-07519-1mm-sku-18402700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 26 teeth for belt width 075=19.1mm SKU: 18402600](https://maedler.in/product/timing-belt-pulley-h-material-steel-26-teeth-for-belt-width-07519-1mm-sku-18402600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 25 teeth for belt width 075=19.1mm SKU: 18402500](https://maedler.in/product/timing-belt-pulley-h-material-steel-25-teeth-for-belt-width-07519-1mm-sku-18402500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 24 teeth for belt width 075=19.1mm SKU: 18402400](https://maedler.in/product/timing-belt-pulley-h-material-steel-24-teeth-for-belt-width-07519-1mm-sku-18402400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 23 teeth for belt width 075=19.1mm SKU: 18402300](https://maedler.in/product/timing-belt-pulley-h-material-steel-23-teeth-for-belt-width-07519-1mm-sku-18402300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 22 teeth for belt width 075=19.1mm SKU: 18402200](https://maedler.in/product/timing-belt-pulley-h-material-steel-22-teeth-for-belt-width-07519-1mm-sku-18402200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 21 teeth for belt width 075=19.1mm SKU: 18402100](https://maedler.in/product/timing-belt-pulley-h-material-steel-21-teeth-for-belt-width-07519-1mm-sku-18402100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 20 teeth for belt width 075=19.1mm SKU: 18402000](https://maedler.in/product/timing-belt-pulley-h-material-steel-20-teeth-for-belt-width-07519-1mm-sku-18402000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 19 teeth for belt width 075=19.1mm SKU: 18401900](https://maedler.in/product/timing-belt-pulley-h-material-steel-19-teeth-for-belt-width-07519-1mm-sku-18401900/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 18 teeth for belt width 075=19.1mm SKU: 18401800](https://maedler.in/product/timing-belt-pulley-h-material-steel-18-teeth-for-belt-width-07519-1mm-sku-18401800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 17 teeth for belt width 075=19.1mm SKU: 18401700](https://maedler.in/product/timing-belt-pulley-h-material-steel-17-teeth-for-belt-width-07519-1mm-sku-18401700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 16 teeth for belt width 075=19.1mm SKU: 18401600](https://maedler.in/product/timing-belt-pulley-h-material-steel-16-teeth-for-belt-width-07519-1mm-sku-18401600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 15 teeth for belt width 075=19.1mm SKU: 18401500](https://maedler.in/product/timing-belt-pulley-h-material-steel-15-teeth-for-belt-width-07519-1mm-sku-18401500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 14 teeth for belt width 075=19.1mm SKU: 18401400](https://maedler.in/product/timing-belt-pulley-h-material-steel-14-teeth-for-belt-width-07519-1mm-sku-18401400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [timing bar L 3/8" (9.525mm) 30 teeth length 160mm material aluminium SKU: 18293000](https://maedler.in/product/timing-bar-l-3-8-9-525mm-30-teeth-length-160mm-material-aluminium-sku-18293000/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 27 teeth length 160mm material aluminium SKU: 18292700](https://maedler.in/product/timing-bar-l-3-8-9-525mm-27-teeth-length-160mm-material-aluminium-sku-18292700/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 24 teeth length 160mm material aluminium SKU: 18292400](https://maedler.in/product/timing-bar-l-3-8-9-525mm-24-teeth-length-160mm-material-aluminium-sku-18292400/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 23 teeth length 160mm material aluminium SKU: 18292300](https://maedler.in/product/timing-bar-l-3-8-9-525mm-23-teeth-length-160mm-material-aluminium-sku-18292300/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 22 teeth length 160mm material aluminium SKU: 18292200](https://maedler.in/product/timing-bar-l-3-8-9-525mm-22-teeth-length-160mm-material-aluminium-sku-18292200/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 21 teeth length 160mm material aluminium SKU: 18292100](https://maedler.in/product/timing-bar-l-3-8-9-525mm-21-teeth-length-160mm-material-aluminium-sku-18292100/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 20 teeth length 160mm material aluminium SKU: 18292000](https://maedler.in/product/timing-bar-l-3-8-9-525mm-20-teeth-length-160mm-material-aluminium-sku-18292000/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 19 teeth length 160mm material aluminium SKU: 18291900](https://maedler.in/product/timing-bar-l-3-8-9-525mm-19-teeth-length-160mm-material-aluminium-sku-18291900/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 18 teeth length 160mm material aluminium SKU: 18291800](https://maedler.in/product/timing-bar-l-3-8-9-525mm-18-teeth-length-160mm-material-aluminium-sku-18291800/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 17 teeth length 160mm material aluminium SKU: 18291700](https://maedler.in/product/timing-bar-l-3-8-9-525mm-17-teeth-length-160mm-material-aluminium-sku-18291700/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 16 teeth length 160mm material aluminium SKU: 18291600](https://maedler.in/product/timing-bar-l-3-8-9-525mm-16-teeth-length-160mm-material-aluminium-sku-18291600/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 15 teeth length 160mm material aluminium SKU: 18291500](https://maedler.in/product/timing-bar-l-3-8-9-525mm-15-teeth-length-160mm-material-aluminium-sku-18291500/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 14 teeth length 160mm material aluminium SKU: 18291400](https://maedler.in/product/timing-bar-l-3-8-9-525mm-14-teeth-length-160mm-material-aluminium-sku-18291400/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 13 teeth length 160mm material aluminium SKU: 18291300](https://maedler.in/product/timing-bar-l-3-8-9-525mm-13-teeth-length-160mm-material-aluminium-sku-18291300/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 12 teeth length 160mm material aluminium SKU: 18291200](https://maedler.in/product/timing-bar-l-3-8-9-525mm-12-teeth-length-160mm-material-aluminium-sku-18291200/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 11 teeth length 140mm material aluminium SKU: 18291100](https://maedler.in/product/timing-bar-l-3-8-9-525mm-11-teeth-length-140mm-material-aluminium-sku-18291100/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 10 teeth length 140mm material aluminium SKU: 18291000](https://maedler.in/product/timing-bar-l-3-8-9-525mm-10-teeth-length-140mm-material-aluminium-sku-18291000/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [Fixing plate for timing belts material aluminium L belt width 100=25.4mm SKU: 18289900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-l-belt-width-10025-4mm-sku-18289900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 600 L 160 teeth belt width 100=25.4mm SKU: 18286000](https://maedler.in/product/neoprene-timing-belt-600-l-160-teeth-belt-width-10025-4mm-sku-18286000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 L 144 teeth belt width 100=25.4mm SKU: 18285400](https://maedler.in/product/neoprene-timing-belt-540-l-144-teeth-belt-width-10025-4mm-sku-18285400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 L 136 teeth belt width 100=25.4mm SKU: 18285100](https://maedler.in/product/neoprene-timing-belt-510-l-136-teeth-belt-width-10025-4mm-sku-18285100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 L 128 teeth belt width 100=25.4mm SKU: 18284800](https://maedler.in/product/neoprene-timing-belt-480-l-128-teeth-belt-width-10025-4mm-sku-18284800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 L 120 teeth belt width 100=25.4mm SKU: 18284500](https://maedler.in/product/neoprene-timing-belt-450-l-120-teeth-belt-width-10025-4mm-sku-18284500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 L 112 teeth belt width 100=25.4mm SKU: 18284200](https://maedler.in/product/neoprene-timing-belt-420-l-112-teeth-belt-width-10025-4mm-sku-18284200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 L 104 teeth belt width 100=25.4mm SKU: 18283900](https://maedler.in/product/neoprene-timing-belt-390-l-104-teeth-belt-width-10025-4mm-sku-18283900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 367 L 98 teeth belt width 100=25.4mm SKU: 18283700](https://maedler.in/product/neoprene-timing-belt-367-l-98-teeth-belt-width-10025-4mm-sku-18283700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 345 L 92 teeth belt width 100=25.4mm SKU: 18283500](https://maedler.in/product/neoprene-timing-belt-345-l-92-teeth-belt-width-10025-4mm-sku-18283500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 322 L 86 teeth belt width 100=25.4mm SKU: 18283200](https://maedler.in/product/neoprene-timing-belt-322-l-86-teeth-belt-width-10025-4mm-sku-18283200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 L 80 teeth belt width 100=25.4mm SKU: 18283000](https://maedler.in/product/neoprene-timing-belt-300-l-80-teeth-belt-width-10025-4mm-sku-18283000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 285 L 76 teeth belt width 100=25.4mm SKU: 18282900](https://maedler.in/product/neoprene-timing-belt-285-l-76-teeth-belt-width-10025-4mm-sku-18282900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 L 72 teeth belt width 100=25.4mm SKU: 18282700](https://maedler.in/product/neoprene-timing-belt-270-l-72-teeth-belt-width-10025-4mm-sku-18282700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 255 L 68 teeth belt width 100=25.4mm SKU: 18282600](https://maedler.in/product/neoprene-timing-belt-255-l-68-teeth-belt-width-10025-4mm-sku-18282600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 L 64 teeth belt width 100=25.4mm SKU: 18282400](https://maedler.in/product/neoprene-timing-belt-240-l-64-teeth-belt-width-10025-4mm-sku-18282400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 225 L 60 teeth belt width 100=25.4mm SKU: 18282200](https://maedler.in/product/neoprene-timing-belt-225-l-60-teeth-belt-width-10025-4mm-sku-18282200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 L 56 teeth belt width 100=25.4mm SKU: 18282100](https://maedler.in/product/neoprene-timing-belt-210-l-56-teeth-belt-width-10025-4mm-sku-18282100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 187 L 50 teeth belt width 100=25.4mm SKU: 18281900](https://maedler.in/product/neoprene-timing-belt-187-l-50-teeth-belt-width-10025-4mm-sku-18281900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 L 40 teeth belt width 100=25.4mm SKU: 18281500](https://maedler.in/product/neoprene-timing-belt-150-l-40-teeth-belt-width-10025-4mm-sku-18281500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 L 33 teeth belt width 100=25.4mm SKU: 18281200](https://maedler.in/product/neoprene-timing-belt-124-l-33-teeth-belt-width-10025-4mm-sku-18281200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt L=3/8" (9.525mm) width 100=25.4mm open length SKU: 18280000](https://maedler.in/product/neoprene-timing-belt-l3-8-9-525mm-width-10025-4mm-open-length-sku-18280000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium L belt width 075=19.1mm SKU: 18279900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-l-belt-width-07519-1mm-sku-18279900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 600 L 160 teeth belt width 075=19.1mm SKU: 18276000](https://maedler.in/product/neoprene-timing-belt-600-l-160-teeth-belt-width-07519-1mm-sku-18276000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 L 144 teeth belt width 075=19.1mm SKU: 18275400](https://maedler.in/product/neoprene-timing-belt-540-l-144-teeth-belt-width-07519-1mm-sku-18275400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 L 136 teeth belt width 075=19.1mm SKU: 18275100](https://maedler.in/product/neoprene-timing-belt-510-l-136-teeth-belt-width-07519-1mm-sku-18275100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 L 128 teeth belt width 075=19.1mm SKU: 18274800](https://maedler.in/product/neoprene-timing-belt-480-l-128-teeth-belt-width-07519-1mm-sku-18274800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 L 120 teeth belt width 075=19.1mm SKU: 18274500](https://maedler.in/product/neoprene-timing-belt-450-l-120-teeth-belt-width-07519-1mm-sku-18274500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 L 112 teeth belt width 075=19.1mm SKU: 18274200](https://maedler.in/product/neoprene-timing-belt-420-l-112-teeth-belt-width-07519-1mm-sku-18274200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium H belt width 100=25.4mm SKU: 18469900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-h-belt-width-10025-4mm-sku-18469900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 1400 H 280 teeth belt width 100=25.4mm SKU: 18467800](https://maedler.in/product/neoprene-timing-belt-1400-h-280-teeth-belt-width-10025-4mm-sku-18467800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1250 H 250 teeth belt width 100=25.4mm SKU: 18466900](https://maedler.in/product/neoprene-timing-belt-1250-h-250-teeth-belt-width-10025-4mm-sku-18466900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1100 H 220 teeth belt width 100=25.4mm SKU: 18466100](https://maedler.in/product/neoprene-timing-belt-1100-h-220-teeth-belt-width-10025-4mm-sku-18466100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1000 H 200 teeth belt width 100=25.4mm SKU: 18465600](https://maedler.in/product/neoprene-timing-belt-1000-h-200-teeth-belt-width-10025-4mm-sku-18465600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 900 H 180 teeth belt width 100=25.4mm SKU: 18465000](https://maedler.in/product/neoprene-timing-belt-900-h-180-teeth-belt-width-10025-4mm-sku-18465000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 850 H 170 teeth belt width 100=25.4mm SKU: 18464700](https://maedler.in/product/neoprene-timing-belt-850-h-170-teeth-belt-width-10025-4mm-sku-18464700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 800 H 160 teeth belt width 100=25.4mm SKU: 18464500](https://maedler.in/product/neoprene-timing-belt-800-h-160-teeth-belt-width-10025-4mm-sku-18464500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 750 H 150 teeth belt width 100=25.4mm SKU: 18464300](https://maedler.in/product/neoprene-timing-belt-750-h-150-teeth-belt-width-10025-4mm-sku-18464300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 700 H 140 teeth belt width 100=25.4mm SKU: 18464100](https://maedler.in/product/neoprene-timing-belt-700-h-140-teeth-belt-width-10025-4mm-sku-18464100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 660 H 132 teeth belt width 100=25.4mm SKU: 18463900](https://maedler.in/product/neoprene-timing-belt-660-h-132-teeth-belt-width-10025-4mm-sku-18463900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 630 H 126 teeth belt width 100=25.4mm SKU: 18463700](https://maedler.in/product/neoprene-timing-belt-630-h-126-teeth-belt-width-10025-4mm-sku-18463700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 600 H 120 teeth belt width 100=25.4mm SKU: 18463500](https://maedler.in/product/neoprene-timing-belt-600-h-120-teeth-belt-width-10025-4mm-sku-18463500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 570 H 114 teeth belt width 100=25.4mm SKU: 18463300](https://maedler.in/product/neoprene-timing-belt-570-h-114-teeth-belt-width-10025-4mm-sku-18463300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 H 108 teeth belt width 100=25.4mm SKU: 18463100](https://maedler.in/product/neoprene-timing-belt-540-h-108-teeth-belt-width-10025-4mm-sku-18463100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 H 102 teeth belt width 100=25.4mm SKU: 18462900](https://maedler.in/product/neoprene-timing-belt-510-h-102-teeth-belt-width-10025-4mm-sku-18462900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 H 96 teeth belt width 100=25.4mm SKU: 18462700](https://maedler.in/product/neoprene-timing-belt-480-h-96-teeth-belt-width-10025-4mm-sku-18462700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 H 90 teeth belt width 100=25.4mm SKU: 18462500](https://maedler.in/product/neoprene-timing-belt-450-h-90-teeth-belt-width-10025-4mm-sku-18462500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 H 84 teeth belt width 100=25.4mm SKU: 18462400](https://maedler.in/product/neoprene-timing-belt-420-h-84-teeth-belt-width-10025-4mm-sku-18462400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 H 78 teeth belt width 100=25.4mm SKU: 18462200](https://maedler.in/product/neoprene-timing-belt-390-h-78-teeth-belt-width-10025-4mm-sku-18462200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 360 H 72 teeth belt width 100=25.4mm SKU: 18462000](https://maedler.in/product/neoprene-timing-belt-360-h-72-teeth-belt-width-10025-4mm-sku-18462000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 330 H 66 teeth belt width 100=25.4mm SKU: 18461900](https://maedler.in/product/neoprene-timing-belt-330-h-66-teeth-belt-width-10025-4mm-sku-18461900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 H 60 teeth belt width 100=25.4mm SKU: 18461700](https://maedler.in/product/neoprene-timing-belt-300-h-60-teeth-belt-width-10025-4mm-sku-18461700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 H 54 teeth belt width 100=25.4mm SKU: 18461500](https://maedler.in/product/neoprene-timing-belt-270-h-54-teeth-belt-width-10025-4mm-sku-18461500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 H 48 teeth belt width 100=25.4mm SKU: 18461300](https://maedler.in/product/neoprene-timing-belt-240-h-48-teeth-belt-width-10025-4mm-sku-18461300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt H=1/2" (12.7mm) width 100=25.4mm open length SKU: 18460000](https://maedler.in/product/neoprene-timing-belt-h1-2-12-7mm-width-10025-4mm-open-length-sku-18460000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium H belt width 075=19.1mm SKU: 18459900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-h-belt-width-07519-1mm-sku-18459900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 1400 H 280 teeth belt width 075=19.1mm SKU: 18457800](https://maedler.in/product/neoprene-timing-belt-1400-h-280-teeth-belt-width-07519-1mm-sku-18457800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1250 H 250 teeth belt width 075=19.1mm SKU: 18456900](https://maedler.in/product/neoprene-timing-belt-1250-h-250-teeth-belt-width-07519-1mm-sku-18456900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1100 H 220 teeth belt width 075=19.1mm SKU: 18456100](https://maedler.in/product/neoprene-timing-belt-1100-h-220-teeth-belt-width-07519-1mm-sku-18456100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1000 H 200 teeth belt width 075=19.1mm SKU: 18455600](https://maedler.in/product/neoprene-timing-belt-1000-h-200-teeth-belt-width-07519-1mm-sku-18455600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 900 H 180 teeth belt width 075=19.1mm SKU: 18455000](https://maedler.in/product/neoprene-timing-belt-900-h-180-teeth-belt-width-07519-1mm-sku-18455000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 850 H 170 teeth belt width 075=19.1mm SKU: 18454700](https://maedler.in/product/neoprene-timing-belt-850-h-170-teeth-belt-width-07519-1mm-sku-18454700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 800 H 160 teeth belt width 075=19.1mm SKU: 18454500](https://maedler.in/product/neoprene-timing-belt-800-h-160-teeth-belt-width-07519-1mm-sku-18454500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 750 H 150 teeth belt width 075=19.1mm SKU: 18454300](https://maedler.in/product/neoprene-timing-belt-750-h-150-teeth-belt-width-07519-1mm-sku-18454300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 700 H 140 teeth belt width 075=19.1mm SKU: 18454100](https://maedler.in/product/neoprene-timing-belt-700-h-140-teeth-belt-width-07519-1mm-sku-18454100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 660 H 132 teeth belt width 075=19.1mm SKU: 18453900](https://maedler.in/product/neoprene-timing-belt-660-h-132-teeth-belt-width-07519-1mm-sku-18453900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 630 H 126 teeth belt width 075=19.1mm SKU: 18453700](https://maedler.in/product/neoprene-timing-belt-630-h-126-teeth-belt-width-07519-1mm-sku-18453700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 600 H 120 teeth belt width 075=19.1mm SKU: 18453500](https://maedler.in/product/neoprene-timing-belt-600-h-120-teeth-belt-width-07519-1mm-sku-18453500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 570 H 114 teeth belt width 075=19.1mm SKU: 18453300](https://maedler.in/product/neoprene-timing-belt-570-h-114-teeth-belt-width-07519-1mm-sku-18453300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 H 108 teeth belt width 075=19.1mm SKU: 18453100](https://maedler.in/product/neoprene-timing-belt-540-h-108-teeth-belt-width-07519-1mm-sku-18453100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 H 102 teeth belt width 075=19.1mm SKU: 18452900](https://maedler.in/product/neoprene-timing-belt-510-h-102-teeth-belt-width-07519-1mm-sku-18452900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 H 96 teeth belt width 075=19.1mm SKU: 18452700](https://maedler.in/product/neoprene-timing-belt-480-h-96-teeth-belt-width-07519-1mm-sku-18452700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 H 90 teeth belt width 075=19.1mm SKU: 18452500](https://maedler.in/product/neoprene-timing-belt-450-h-90-teeth-belt-width-07519-1mm-sku-18452500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 H 84 teeth belt width 075=19.1mm SKU: 18452400](https://maedler.in/product/neoprene-timing-belt-420-h-84-teeth-belt-width-07519-1mm-sku-18452400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 H 78 teeth belt width 075=19.1mm SKU: 18452200](https://maedler.in/product/neoprene-timing-belt-390-h-78-teeth-belt-width-07519-1mm-sku-18452200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 360 H 72 teeth belt width 075=19.1mm SKU: 18452000](https://maedler.in/product/neoprene-timing-belt-360-h-72-teeth-belt-width-07519-1mm-sku-18452000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 330 H 66 teeth belt width 075=19.1mm SKU: 18451900](https://maedler.in/product/neoprene-timing-belt-330-h-66-teeth-belt-width-07519-1mm-sku-18451900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 H 60 teeth belt width 075=19.1mm SKU: 18451700](https://maedler.in/product/neoprene-timing-belt-300-h-60-teeth-belt-width-07519-1mm-sku-18451700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 H 54 teeth belt width 075=19.1mm SKU: 18451500](https://maedler.in/product/neoprene-timing-belt-270-h-54-teeth-belt-width-07519-1mm-sku-18451500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 H 48 teeth belt width 075=19.1mm SKU: 18451300](https://maedler.in/product/neoprene-timing-belt-240-h-48-teeth-belt-width-07519-1mm-sku-18451300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt H=1/2" (12.7mm) width 075=19.1mm open length SKU: 18450000](https://maedler.in/product/neoprene-timing-belt-h1-2-12-7mm-width-07519-1mm-open-length-sku-18450000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Timing belt pulley H material steel 40 teeth for belt width 200=50.8mm SKU: 18434000](https://maedler.in/product/timing-belt-pulley-h-material-steel-40-teeth-for-belt-width-20050-8mm-sku-18434000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 38 teeth for belt width 200=50.8mm SKU: 18433800](https://maedler.in/product/timing-belt-pulley-h-material-steel-38-teeth-for-belt-width-20050-8mm-sku-18433800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 36 teeth for belt width 200=50.8mm SKU: 18433600](https://maedler.in/product/timing-belt-pulley-h-material-steel-36-teeth-for-belt-width-20050-8mm-sku-18433600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 35 teeth for belt width 200=50.8mm SKU: 18433500](https://maedler.in/product/timing-belt-pulley-h-material-steel-35-teeth-for-belt-width-20050-8mm-sku-18433500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 34 teeth for belt width 200=50.8mm SKU: 18433400](https://maedler.in/product/timing-belt-pulley-h-material-steel-34-teeth-for-belt-width-20050-8mm-sku-18433400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 33 teeth for belt width 200=50.8mm SKU: 18433300](https://maedler.in/product/timing-belt-pulley-h-material-steel-33-teeth-for-belt-width-20050-8mm-sku-18433300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 32 teeth for belt width 200=50.8mm SKU: 18433200](https://maedler.in/product/timing-belt-pulley-h-material-steel-32-teeth-for-belt-width-20050-8mm-sku-18433200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 30 teeth for belt width 200=50.8mm SKU: 18433000](https://maedler.in/product/timing-belt-pulley-h-material-steel-30-teeth-for-belt-width-20050-8mm-sku-18433000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 28 teeth for belt width 200=50.8mm SKU: 18432800](https://maedler.in/product/timing-belt-pulley-h-material-steel-28-teeth-for-belt-width-20050-8mm-sku-18432800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 27 teeth for belt width 200=50.8mm SKU: 18432700](https://maedler.in/product/timing-belt-pulley-h-material-steel-27-teeth-for-belt-width-20050-8mm-sku-18432700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 26 teeth for belt width 200=50.8mm SKU: 18432600](https://maedler.in/product/timing-belt-pulley-h-material-steel-26-teeth-for-belt-width-20050-8mm-sku-18432600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 25 teeth for belt width 200=50.8mm SKU: 18432500](https://maedler.in/product/timing-belt-pulley-h-material-steel-25-teeth-for-belt-width-20050-8mm-sku-18432500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 24 teeth for belt width 200=50.8mm SKU: 18432400](https://maedler.in/product/timing-belt-pulley-h-material-steel-24-teeth-for-belt-width-20050-8mm-sku-18432400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 23 teeth for belt width 200=50.8mm SKU: 18432300](https://maedler.in/product/timing-belt-pulley-h-material-steel-23-teeth-for-belt-width-20050-8mm-sku-18432300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 22 teeth for belt width 200=50.8mm SKU: 18432200](https://maedler.in/product/timing-belt-pulley-h-material-steel-22-teeth-for-belt-width-20050-8mm-sku-18432200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 21 teeth for belt width 200=50.8mm SKU: 18432100](https://maedler.in/product/timing-belt-pulley-h-material-steel-21-teeth-for-belt-width-20050-8mm-sku-18432100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 20 teeth for belt width 200=50.8mm SKU: 18432000](https://maedler.in/product/timing-belt-pulley-h-material-steel-20-teeth-for-belt-width-20050-8mm-sku-18432000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 19 teeth for belt width 200=50.8mm SKU: 18431900](https://maedler.in/product/timing-belt-pulley-h-material-steel-19-teeth-for-belt-width-20050-8mm-sku-18431900/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 18 teeth for belt width 200=50.8mm SKU: 18431800](https://maedler.in/product/timing-belt-pulley-h-material-steel-18-teeth-for-belt-width-20050-8mm-sku-18431800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 17 teeth for belt width 200=50.8mm SKU: 18431700](https://maedler.in/product/timing-belt-pulley-h-material-steel-17-teeth-for-belt-width-20050-8mm-sku-18431700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 16 teeth for belt width 200=50.8mm SKU: 18431600](https://maedler.in/product/timing-belt-pulley-h-material-steel-16-teeth-for-belt-width-20050-8mm-sku-18431600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 15 teeth for belt width 200=50.8mm SKU: 18431500](https://maedler.in/product/timing-belt-pulley-h-material-steel-15-teeth-for-belt-width-20050-8mm-sku-18431500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 14 teeth for belt width 200=50.8mm SKU: 18431400](https://maedler.in/product/timing-belt-pulley-h-material-steel-14-teeth-for-belt-width-20050-8mm-sku-18431400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 40 teeth for belt width 150=38.1mm SKU: 18424000](https://maedler.in/product/timing-belt-pulley-h-material-steel-40-teeth-for-belt-width-15038-1mm-sku-18424000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 38 teeth for belt width 150=38.1mm SKU: 18423800](https://maedler.in/product/timing-belt-pulley-h-material-steel-38-teeth-for-belt-width-15038-1mm-sku-18423800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 36 teeth for belt width 150=38.1mm SKU: 18423600](https://maedler.in/product/timing-belt-pulley-h-material-steel-36-teeth-for-belt-width-15038-1mm-sku-18423600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 35 teeth for belt width 150=38.1mm SKU: 18423500](https://maedler.in/product/timing-belt-pulley-h-material-steel-35-teeth-for-belt-width-15038-1mm-sku-18423500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 34 teeth for belt width 150=38.1mm SKU: 18423400](https://maedler.in/product/timing-belt-pulley-h-material-steel-34-teeth-for-belt-width-15038-1mm-sku-18423400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 33 teeth for belt width 150=38.1mm SKU: 18423300](https://maedler.in/product/timing-belt-pulley-h-material-steel-33-teeth-for-belt-width-15038-1mm-sku-18423300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 32 teeth for belt width 150=38.1mm SKU: 18423200](https://maedler.in/product/timing-belt-pulley-h-material-steel-32-teeth-for-belt-width-15038-1mm-sku-18423200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 30 teeth for belt width 150=38.1mm SKU: 18423000](https://maedler.in/product/timing-belt-pulley-h-material-steel-30-teeth-for-belt-width-15038-1mm-sku-18423000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 28 teeth for belt width 150=38.1mm SKU: 18422800](https://maedler.in/product/timing-belt-pulley-h-material-steel-28-teeth-for-belt-width-15038-1mm-sku-18422800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 27 teeth for belt width 150=38.1mm SKU: 18422700](https://maedler.in/product/timing-belt-pulley-h-material-steel-27-teeth-for-belt-width-15038-1mm-sku-18422700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 26 teeth for belt width 150=38.1mm SKU: 18422600](https://maedler.in/product/timing-belt-pulley-h-material-steel-26-teeth-for-belt-width-15038-1mm-sku-18422600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 25 teeth for belt width 150=38.1mm SKU: 18422500](https://maedler.in/product/timing-belt-pulley-h-material-steel-25-teeth-for-belt-width-15038-1mm-sku-18422500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 24 teeth for belt width 150=38.1mm SKU: 18422400](https://maedler.in/product/timing-belt-pulley-h-material-steel-24-teeth-for-belt-width-15038-1mm-sku-18422400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 23 teeth for belt width 150=38.1mm SKU: 18422300](https://maedler.in/product/timing-belt-pulley-h-material-steel-23-teeth-for-belt-width-15038-1mm-sku-18422300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 22 teeth for belt width 150=38.1mm SKU: 18422200](https://maedler.in/product/timing-belt-pulley-h-material-steel-22-teeth-for-belt-width-15038-1mm-sku-18422200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 21 teeth for belt width 150=38.1mm SKU: 18422100](https://maedler.in/product/timing-belt-pulley-h-material-steel-21-teeth-for-belt-width-15038-1mm-sku-18422100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 20 teeth for belt width 150=38.1mm SKU: 18422000](https://maedler.in/product/timing-belt-pulley-h-material-steel-20-teeth-for-belt-width-15038-1mm-sku-18422000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 19 teeth for belt width 150=38.1mm SKU: 18421900](https://maedler.in/product/timing-belt-pulley-h-material-steel-19-teeth-for-belt-width-15038-1mm-sku-18421900/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 18 teeth for belt width 150=38.1mm SKU: 18421800](https://maedler.in/product/timing-belt-pulley-h-material-steel-18-teeth-for-belt-width-15038-1mm-sku-18421800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 17 teeth for belt width 150=38.1mm SKU: 18421700](https://maedler.in/product/timing-belt-pulley-h-material-steel-17-teeth-for-belt-width-15038-1mm-sku-18421700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 16 teeth for belt width 150=38.1mm SKU: 18421600](https://maedler.in/product/timing-belt-pulley-h-material-steel-16-teeth-for-belt-width-15038-1mm-sku-18421600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 15 teeth for belt width 150=38.1mm SKU: 18421500](https://maedler.in/product/timing-belt-pulley-h-material-steel-15-teeth-for-belt-width-15038-1mm-sku-18421500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 14 teeth for belt width 150=38.1mm SKU: 18421400](https://maedler.in/product/timing-belt-pulley-h-material-steel-14-teeth-for-belt-width-15038-1mm-sku-18421400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material grey cast iron 84 teeth for belt width 100=25.4mm SKU: 18418400](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-84-teeth-for-belt-width-10025-4mm-sku-18418400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 72 teeth for belt width 100=25.4mm SKU: 18417200](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-72-teeth-for-belt-width-10025-4mm-sku-18417200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Spur gear made of steel 11SMnPb30 with hub module 1 25 teeth tooth width 10mm helical tooth 20° left handed outside diameter 28.6mm SKU: 21432500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-25-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-28-6mm-sku-21432500/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 24 teeth tooth width 10mm helical tooth 20° left handed outside diameter 27.5mm SKU: 21432400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-24-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-27-5mm-sku-21432400/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 20 teeth tooth width 10mm helical tooth 20° left handed outside diameter 23.3mm SKU: 21432000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-20-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-23-3mm-sku-21432000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 18 teeth tooth width 10mm helical tooth 20° left handed outside diameter 21.2mm SKU: 21431800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-18-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-21-2mm-sku-21431800/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 15 teeth tooth width 10mm helical tooth 20° left handed outside diameter 18.0mm SKU: 21431500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-15-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-18-0mm-sku-21431500/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 10 teeth tooth width 10mm helical tooth 20° left handed outside diameter 12.6mm SKU: 21431000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-10-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-12-6mm-sku-21431000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 50 teeth tooth width 10mm helical tooth 20° right handed outside diameter 55.2mm SKU: 21425000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-50-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-55-2mm-sku-21425000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 40 teeth tooth width 10mm helical tooth 20° right handed outside diameter 44.6mm SKU: 21424000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-40-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-44-6mm-sku-21424000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 36 teeth tooth width 10mm helical tooth 20° right handed outside diameter 40.3mm SKU: 21423600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-36-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-40-3mm-sku-21423600/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 30 teeth tooth width 10mm helical tooth 20° right handed outside diameter 33.9mm SKU: 21423000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-30-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-33-9mm-sku-21423000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 25 teeth tooth width 10mm helical tooth 20° right handed outside diameter 28.6mm SKU: 21422500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-25-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-28-6mm-sku-21422500/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 24 teeth tooth width 10mm helical tooth 20° right handed outside diameter 27.5mm SKU: 21422400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-24-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-27-5mm-sku-21422400/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 20 teeth tooth width 10mm helical tooth 20° right handed outside diameter 23.3mm SKU: 21422000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-20-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-23-3mm-sku-21422000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 18 teeth tooth width 10mm helical tooth 20° right handed outside diameter 21.2mm SKU: 21421800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-18-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-21-2mm-sku-21421800/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 15 teeth tooth width 10mm helical tooth 20° right handed outside diameter 18.0mm SKU: 21421500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-15-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-18-0mm-sku-21421500/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 10 teeth tooth width 10mm helical tooth 20° right handed outside diameter 12.6mm SKU: 21421000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-10-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-12-6mm-sku-21421000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Round gear rack made of stainless steel module 3.18 (metrical pitch 10mm) Ø 30mm h9 length 2000mm SKU: 21099634](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-o-30mm-h9-length-2000mm-sku-21099634/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of stainless steel module 3.18 (metrical pitch 10mm) Ø 30mm h9 length 1000mm SKU: 21099632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-o-30mm-h9-length-1000mm-sku-21099632/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of stainless steel module 3.18 (metrical pitch 10mm) Ø 30mm h9 length 500mm SKU: 21099631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-o-30mm-h9-length-500mm-sku-21099631/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Gear rack made of stainless steel module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 2000mm SKU: 21099609](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-2000mm-sku-21099609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 1000mm SKU: 21099605](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-1000mm-sku-21099605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 500mm SKU: 21099603](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-500mm-sku-21099603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 250mm SKU: 21099601](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-250mm-sku-21099601/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks stainless steel 1.4305 pitch 10mm tooth width 30mm height 30mm length approx. 127mm SKU: 21099600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-pitch-10mm-tooth-width-30mm-height-30mm-length-approx-127mm-sku-21099600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of steel module 3.18 (metrical pitch 10mm) Ø 30mm h6 length 2000mm SKU: 21063400](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-18-metrical-pitch-10mm-o-30mm-h6-length-2000mm-sku-21063400/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of steel module 3.18 (metrical pitch 10mm) Ø 30mm h6 length 1000mm SKU: 21063200](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-18-metrical-pitch-10mm-o-30mm-h6-length-1000mm-sku-21063200/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of steel module 3.18 (metrical pitch 10mm) Ø 30mm h6 length 500mm SKU: 21063100](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-18-metrical-pitch-10mm-o-30mm-h6-length-500mm-sku-21063100/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Gear rack steel C45K module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 2000mm SKU: 21060900](https://maedler.in/product/gear-rack-steel-c45k-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-2000mm-sku-21060900/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 1000mm SKU: 21060500](https://maedler.in/product/gear-rack-steel-c45k-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-1000mm-sku-21060500/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 500mm SKU: 21060300](https://maedler.in/product/gear-rack-steel-c45k-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-500mm-sku-21060300/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 250mm SKU: 21060100](https://maedler.in/product/gear-rack-steel-c45k-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-250mm-sku-21060100/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K pitch 10mm tooth width 30mm height 30mm length approx. 127mm SKU: 21060000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-pitch-10mm-tooth-width-30mm-height-30mm-length-approx-127mm-sku-21060000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of stainless steel module 1.59 (metrical pitch 5mm) Ø 15mm h9 length 2000mm SKU: 20599634](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-o-15mm-h9-length-2000mm-sku-20599634/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of stainless steel module 1.59 (metrical pitch 5mm) Ø 15mm h9 length 1000mm SKU: 20599632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-o-15mm-h9-length-1000mm-sku-20599632/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of stainless steel module 1.59 (metrical pitch 5mm) Ø 15mm h9 length 500mm SKU: 20599631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-o-15mm-h9-length-500mm-sku-20599631/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Gear rack made of stainless steel module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 2000mm SKU: 20599609](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-2000mm-sku-20599609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 1000mm SKU: 20599605](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-1000mm-sku-20599605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 500mm SKU: 20599603](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-500mm-sku-20599603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 250mm SKU: 20599601](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-250mm-sku-20599601/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks stainless steel 1.4305 pitch 5mm tooth width 15mm height 15mm length approx. 63mm SKU: 20599600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-pitch-5mm-tooth-width-15mm-height-15mm-length-approx-63mm-sku-20599600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of steel module 1.59 (metrical pitch 5mm) Ø 15mm h6 length 2000mm SKU: 20563400](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-59-metrical-pitch-5mm-o-15mm-h6-length-2000mm-sku-20563400/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of steel module 1.59 (metrical pitch 5mm) Ø 15mm h6 length 1000mm SKU: 20563200](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-59-metrical-pitch-5mm-o-15mm-h6-length-1000mm-sku-20563200/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of steel module 1.59 (metrical pitch 5mm) Ø 15mm h6 length 500mm SKU: 20563100](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-59-metrical-pitch-5mm-o-15mm-h6-length-500mm-sku-20563100/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Gear rack steel C45K module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 2000mm SKU: 20560900](https://maedler.in/product/gear-rack-steel-c45k-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-2000mm-sku-20560900/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 1000mm SKU: 20560500](https://maedler.in/product/gear-rack-steel-c45k-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-1000mm-sku-20560500/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 500mm SKU: 20560300](https://maedler.in/product/gear-rack-steel-c45k-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-500mm-sku-20560300/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 250mm SKU: 20560100](https://maedler.in/product/gear-rack-steel-c45k-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-250mm-sku-20560100/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K pitch 5mm tooth width 15mm height 15mm length approx. 63mm SKU: 20560000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-pitch-5mm-tooth-width-15mm-height-15mm-length-approx-63mm-sku-20560000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Fixing plate for timing belts H belt width 200=50.8mm SKU: 18489900](https://maedler.in/product/fixing-plate-for-timing-belts-h-belt-width-20050-8mm-sku-18489900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 1400 H 280 teeth belt width 200=50.8mm SKU: 18487800](https://maedler.in/product/neoprene-timing-belt-1400-h-280-teeth-belt-width-20050-8mm-sku-18487800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1250 H 250 teeth belt width 200=50.8mm SKU: 18486900](https://maedler.in/product/neoprene-timing-belt-1250-h-250-teeth-belt-width-20050-8mm-sku-18486900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1100 H 220 teeth belt width 200=50.8mm SKU: 18486100](https://maedler.in/product/neoprene-timing-belt-1100-h-220-teeth-belt-width-20050-8mm-sku-18486100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1000 H 200 teeth belt width 200=50.8mm SKU: 18485600](https://maedler.in/product/neoprene-timing-belt-1000-h-200-teeth-belt-width-20050-8mm-sku-18485600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 900 H 180 teeth belt width 200=50.8mm SKU: 18485000](https://maedler.in/product/neoprene-timing-belt-900-h-180-teeth-belt-width-20050-8mm-sku-18485000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 850 H 170 teeth belt width 200=50.8mm SKU: 18484700](https://maedler.in/product/neoprene-timing-belt-850-h-170-teeth-belt-width-20050-8mm-sku-18484700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 800 H 160 teeth belt width 200=50.8mm SKU: 18484500](https://maedler.in/product/neoprene-timing-belt-800-h-160-teeth-belt-width-20050-8mm-sku-18484500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 750 H 150 teeth belt width 200=50.8mm SKU: 18484300](https://maedler.in/product/neoprene-timing-belt-750-h-150-teeth-belt-width-20050-8mm-sku-18484300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 700 H 140 teeth belt width 200=50.8mm SKU: 18484100](https://maedler.in/product/neoprene-timing-belt-700-h-140-teeth-belt-width-20050-8mm-sku-18484100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 660 H 132 teeth belt width 200=50.8mm SKU: 18483900](https://maedler.in/product/neoprene-timing-belt-660-h-132-teeth-belt-width-20050-8mm-sku-18483900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 630 H 126 teeth belt width 200=50.8mm SKU: 18483700](https://maedler.in/product/neoprene-timing-belt-630-h-126-teeth-belt-width-20050-8mm-sku-18483700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 600 H 120 teeth belt width 200=50.8mm SKU: 18483500](https://maedler.in/product/neoprene-timing-belt-600-h-120-teeth-belt-width-20050-8mm-sku-18483500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 570 H 114 teeth belt width 200=50.8mm SKU: 18483300](https://maedler.in/product/neoprene-timing-belt-570-h-114-teeth-belt-width-20050-8mm-sku-18483300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 H 108 teeth belt width 200=50.8mm SKU: 18483100](https://maedler.in/product/neoprene-timing-belt-540-h-108-teeth-belt-width-20050-8mm-sku-18483100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 H 102 teeth belt width 200=50.8mm SKU: 18482900](https://maedler.in/product/neoprene-timing-belt-510-h-102-teeth-belt-width-20050-8mm-sku-18482900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 H 96 teeth belt width 200=50.8mm SKU: 18482700](https://maedler.in/product/neoprene-timing-belt-480-h-96-teeth-belt-width-20050-8mm-sku-18482700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 H 90 teeth belt width 200=50.8mm SKU: 18482500](https://maedler.in/product/neoprene-timing-belt-450-h-90-teeth-belt-width-20050-8mm-sku-18482500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 H 84 teeth belt width 200=50.8mm SKU: 18482400](https://maedler.in/product/neoprene-timing-belt-420-h-84-teeth-belt-width-20050-8mm-sku-18482400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 H 78 teeth belt width 200=50.8mm SKU: 18482200](https://maedler.in/product/neoprene-timing-belt-390-h-78-teeth-belt-width-20050-8mm-sku-18482200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 360 H 72 teeth belt width 200=50.8mm SKU: 18482000](https://maedler.in/product/neoprene-timing-belt-360-h-72-teeth-belt-width-20050-8mm-sku-18482000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 330 H 66 teeth belt width 200=50.8mm SKU: 18481900](https://maedler.in/product/neoprene-timing-belt-330-h-66-teeth-belt-width-20050-8mm-sku-18481900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 H 60 teeth belt width 200=50.8mm SKU: 18481700](https://maedler.in/product/neoprene-timing-belt-300-h-60-teeth-belt-width-20050-8mm-sku-18481700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 H 54 teeth belt width 200=50.8mm SKU: 18481500](https://maedler.in/product/neoprene-timing-belt-270-h-54-teeth-belt-width-20050-8mm-sku-18481500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 H 48 teeth belt width 200=50.8mm SKU: 18481300](https://maedler.in/product/neoprene-timing-belt-240-h-48-teeth-belt-width-20050-8mm-sku-18481300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt H=1/2" (12.7mm) width 200=50.8mm open length SKU: 18480000](https://maedler.in/product/neoprene-timing-belt-h1-2-12-7mm-width-20050-8mm-open-length-sku-18480000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium H belt width 150=38.1mm SKU: 18479900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-h-belt-width-15038-1mm-sku-18479900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 1400 H 280 teeth belt width 150=38.1mm SKU: 18477800](https://maedler.in/product/neoprene-timing-belt-1400-h-280-teeth-belt-width-15038-1mm-sku-18477800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1250 H 250 teeth belt width 150=38.1mm SKU: 18476900](https://maedler.in/product/neoprene-timing-belt-1250-h-250-teeth-belt-width-15038-1mm-sku-18476900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1100 H 220 teeth belt width 150=38.1mm SKU: 18476100](https://maedler.in/product/neoprene-timing-belt-1100-h-220-teeth-belt-width-15038-1mm-sku-18476100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1000 H 200 teeth belt width 150=38.1mm SKU: 18475600](https://maedler.in/product/neoprene-timing-belt-1000-h-200-teeth-belt-width-15038-1mm-sku-18475600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 900 H 180 teeth belt width 150=38.1mm SKU: 18475000](https://maedler.in/product/neoprene-timing-belt-900-h-180-teeth-belt-width-15038-1mm-sku-18475000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 850 H 170 teeth belt width 150=38.1mm SKU: 18474700](https://maedler.in/product/neoprene-timing-belt-850-h-170-teeth-belt-width-15038-1mm-sku-18474700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 800 H 160 teeth belt width 150=38.1mm SKU: 18474500](https://maedler.in/product/neoprene-timing-belt-800-h-160-teeth-belt-width-15038-1mm-sku-18474500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 750 H 150 teeth belt width 150=38.1mm SKU: 18474300](https://maedler.in/product/neoprene-timing-belt-750-h-150-teeth-belt-width-15038-1mm-sku-18474300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 700 H 140 teeth belt width 150=38.1mm SKU: 18474100](https://maedler.in/product/neoprene-timing-belt-700-h-140-teeth-belt-width-15038-1mm-sku-18474100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 660 H 132 teeth belt width 150=38.1mm SKU: 18473900](https://maedler.in/product/neoprene-timing-belt-660-h-132-teeth-belt-width-15038-1mm-sku-18473900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 630 H 126 teeth belt width 150=38.1mm SKU: 18473700](https://maedler.in/product/neoprene-timing-belt-630-h-126-teeth-belt-width-15038-1mm-sku-18473700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 600 H 120 teeth belt width 150=38.1mm SKU: 18473500](https://maedler.in/product/neoprene-timing-belt-600-h-120-teeth-belt-width-15038-1mm-sku-18473500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 570 H 114 teeth belt width 150=38.1mm SKU: 18473300](https://maedler.in/product/neoprene-timing-belt-570-h-114-teeth-belt-width-15038-1mm-sku-18473300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 H 108 teeth belt width 150=38.1mm SKU: 18473100](https://maedler.in/product/neoprene-timing-belt-540-h-108-teeth-belt-width-15038-1mm-sku-18473100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 H 102 teeth belt width 150=38.1mm SKU: 18472900](https://maedler.in/product/neoprene-timing-belt-510-h-102-teeth-belt-width-15038-1mm-sku-18472900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 H 96 teeth belt width 150=38.1mm SKU: 18472700](https://maedler.in/product/neoprene-timing-belt-480-h-96-teeth-belt-width-15038-1mm-sku-18472700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 H 90 teeth belt width 150=38.1mm SKU: 18472500](https://maedler.in/product/neoprene-timing-belt-450-h-90-teeth-belt-width-15038-1mm-sku-18472500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 H 84 teeth belt width 150=38.1mm SKU: 18472400](https://maedler.in/product/neoprene-timing-belt-420-h-84-teeth-belt-width-15038-1mm-sku-18472400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 H 78 teeth belt width 150=38.1mm SKU: 18472200](https://maedler.in/product/neoprene-timing-belt-390-h-78-teeth-belt-width-15038-1mm-sku-18472200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 360 H 72 teeth belt width 150=38.1mm SKU: 18472000](https://maedler.in/product/neoprene-timing-belt-360-h-72-teeth-belt-width-15038-1mm-sku-18472000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 330 H 66 teeth belt width 150=38.1mm SKU: 18471900](https://maedler.in/product/neoprene-timing-belt-330-h-66-teeth-belt-width-15038-1mm-sku-18471900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 H 60 teeth belt width 150=38.1mm SKU: 18471700](https://maedler.in/product/neoprene-timing-belt-300-h-60-teeth-belt-width-15038-1mm-sku-18471700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 H 54 teeth belt width 150=38.1mm SKU: 18471500](https://maedler.in/product/neoprene-timing-belt-270-h-54-teeth-belt-width-15038-1mm-sku-18471500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 H 48 teeth belt width 150=38.1mm SKU: 18471300](https://maedler.in/product/neoprene-timing-belt-240-h-48-teeth-belt-width-15038-1mm-sku-18471300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt H=1/2" (12.7mm) width 150=38.1mm open length SKU: 18470000](https://maedler.in/product/neoprene-timing-belt-h1-2-12-7mm-width-15038-1mm-open-length-sku-18470000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Precision gear rack module 1.5 15x15x500mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 22868300](https://maedler.in/product/precision-gear-rack-module-1-5-15x15x500mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-22868300/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Mounting aid for gear racks steel C45KG module 1.5 tooth width 15mm height 15mm length approx. 60mm SKU: 22868000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45kg-module-1-5-tooth-width-15mm-height-15mm-length-approx-60mm-sku-22868000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of high strength steel module = 1,5 diameter = 15 mm h6 length = 1000 mm SKU: 22866632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-15-diameter-15-mm-h6-length-1000-mm-sku-22866632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 1,5 diameter = 15 mm h6 length = 500 mm SKU: 22866631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-15-diameter-15-mm-h6-length-500-mm-sku-22866631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel module 1.5 diameter 15mm h6 length 1000mm SKU: 22863200](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-5-diameter-15mm-h6-length-1000mm-sku-22863200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 1.5 diameter 15mm h6 length 500mm SKU: 22863100](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-5-diameter-15mm-h6-length-500mm-sku-22863100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1,5 diameter = 15 mm h6 length = 250 mm SKU: 22863000](https://maedler.in/product/round-gear-rack-made-of-steel-module-15-diameter-15-mm-h6-length-250-mm-sku-22863000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 1.5 tooth width 15mm height 15mm length 1500mm SKU: 22860700](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-15mm-height-15mm-length-1500mm-sku-22860700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 15mm height 15mm length 1000mm SKU: 22860500](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-15mm-height-15mm-length-1000mm-sku-22860500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 15mm height 15mm length 500mm SKU: 22860300](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-15mm-height-15mm-length-500mm-sku-22860300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 15mm height 10mm length 1000mm SKU: 22860100](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-15mm-height-10mm-length-1000mm-sku-22860100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of steel C45 module 1.5 90 teeth tooth width 15mm outside diameter 170mm SKU: 22849000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-90-teeth-tooth-width-15mm-outside-diameter-170mm-sku-22849000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 80 teeth tooth width 15mm outside diameter 150mm SKU: 22848000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-150mm-sku-22848000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 72 teeth tooth width 15mm outside diameter 140mm SKU: 22847200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-72-teeth-tooth-width-15mm-outside-diameter-140mm-sku-22847200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 70 teeth tooth width 15mm outside diameter 135mm SKU: 22847000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-135mm-sku-22847000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 60 teeth tooth width 15mm outside diameter 120mm SKU: 22846000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-120mm-sku-22846000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 50 teeth tooth width 15mm outside diameter 105mm SKU: 22845000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-105mm-sku-22845000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 48 teeth tooth width 15mm outside diameter 100mm SKU: 22844800](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-100mm-sku-22844800/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 45 teeth tooth width 15mm outside diameter 100mm SKU: 22844500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-100mm-sku-22844500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 40 teeth tooth width 15mm outside diameter 90mm SKU: 22844000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-90mm-sku-22844000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 36 teeth tooth width 15mm outside diameter 85mm SKU: 22843600](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-36-teeth-tooth-width-15mm-outside-diameter-85mm-sku-22843600/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 30 teeth tooth width 15mm outside diameter 75mm SKU: 22843000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-75mm-sku-22843000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 25 teeth tooth width 15mm outside diameter 70mm SKU: 22842500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-70mm-sku-22842500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 120 teeth tooth width 15mm outside diameter 220mm SKU: 22841200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-120-teeth-tooth-width-15mm-outside-diameter-220mm-sku-22841200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 100 teeth tooth width 15mm outside diameter 190mm SKU: 22841000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-100-teeth-tooth-width-15mm-outside-diameter-190mm-sku-22841000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 1.5 tooth width 17mm height 17mm nominal length 2000mm SKU: 22811619](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-5-tooth-width-17mm-height-17mm-nominal-length-2000mm-sku-22811619/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.5 tooth width 17mm height 17mm nominal length 1000mm SKU: 22811612](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-5-tooth-width-17mm-height-17mm-nominal-length-1000mm-sku-22811612/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.5 tooth width 15mm height 15mm nominal length 2000mm SKU: 22811609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-5-tooth-width-15mm-height-15mm-nominal-length-2000mm-sku-22811609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.5 tooth width 15mm height 15mm nominal length 1000mm SKU: 22811605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-5-tooth-width-15mm-height-15mm-nominal-length-1000mm-sku-22811605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 10mm height 10mm length 1000mm SKU: 22760500](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-10mm-height-10mm-length-1000mm-sku-22760500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 10mm height 10mm length 500mm SKU: 22760100](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-10mm-height-10mm-length-500mm-sku-22760100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 1.5 tooth width 10mm height 10mm length approx. 60mm SKU: 22760000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-1-5-tooth-width-10mm-height-10mm-length-approx-60mm-sku-22760000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 1.25 tooth width 10mm height 10mm length 1000mm SKU: 22660500](https://maedler.in/product/gear-rack-steel-c45k-module-1-25-tooth-width-10mm-height-10mm-length-1000mm-sku-22660500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.25 tooth width 10mm height 10mm length 500mm SKU: 22660300](https://maedler.in/product/gear-rack-steel-c45k-module-1-25-tooth-width-10mm-height-10mm-length-500mm-sku-22660300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.25 tooth width 10mm height 10mm length 250mm SKU: 22660100](https://maedler.in/product/gear-rack-steel-c45k-module-1-25-tooth-width-10mm-height-10mm-length-250mm-sku-22660100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 1 diameter = 15 mm length = 1000 mm SKU: 22566632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-1-diameter-15-mm-length-1000-mm-sku-22566632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 1 diameter = 15 mm length = 500 mm SKU: 22566631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-1-diameter-15-mm-length-500-mm-sku-22566631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel, module = 1, diameter = 15 mm h6 length = 1000 mm SKU: 22563200](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-15-mm-h6-length-1000-mm-sku-22563200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1, diameter = 15 mm h6 length = 500 mm SKU: 22563100](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-15-mm-h6-length-500-mm-sku-22563100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1, diameter = 15 mm h6 length = 250 mm SKU: 22563000](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-15-mm-h6-length-250-mm-sku-22563000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of stainless steel 1.4305 module 1 diameter 10mm h9 length 1000mm SKU: 22499632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-1-diameter-10mm-h9-length-1000mm-sku-22499632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 1 diameter 10mm h9 length 500mm SKU: 22499631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-1-diameter-10mm-h9-length-500mm-sku-22499631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 15mm height 15mm length 1000mm SKU: 22499612](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-15mm-height-15mm-length-1000mm-sku-22499612/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 15mm height 15mm length 500mm SKU: 22499610](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-15mm-height-15mm-length-500mm-sku-22499610/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 15mm height 15mm length 250mm SKU: 22499609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-15mm-height-15mm-length-250mm-sku-22499609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 10mm height 10mm length 1000mm SKU: 22499608](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-10mm-height-10mm-length-1000mm-sku-22499608/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 10mm height 10mm length 500mm SKU: 22499605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-10mm-height-10mm-length-500mm-sku-22499605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 10mm height 10mm length 250mm SKU: 22499603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-10mm-height-10mm-length-250mm-sku-22499603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Internal gear made of 1.4305 (AISI303) module 1,0 90 teeth teeth width 10mm SKU: 22499490](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-90-teeth-teeth-width-10mm-sku-22499490/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 80 teeth teeth width 10mm SKU: 22499480](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-80-teeth-teeth-width-10mm-sku-22499480/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 72 teeth teeth width 10mm SKU: 22499472](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-72-teeth-teeth-width-10mm-sku-22499472/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 70 teeth teeth width 10mm SKU: 22499470](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-70-teeth-teeth-width-10mm-sku-22499470/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 60 teeth teeth width 10mm SKU: 22499460](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-60-teeth-teeth-width-10mm-sku-22499460/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 50 teeth teeth width 10mm SKU: 22499450](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-50-teeth-teeth-width-10mm-sku-22499450/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 48 teeth teeth width 10mm SKU: 22499448](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-48-teeth-teeth-width-10mm-sku-22499448/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 45 teeth teeth width 10mm SKU: 22499445](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-45-teeth-teeth-width-10mm-sku-22499445/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 40 teeth teeth width 10mm SKU: 22499440](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-40-teeth-teeth-width-10mm-sku-22499440/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 36 teeth teeth width 10mm SKU: 22499436](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-36-teeth-teeth-width-10mm-sku-22499436/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 30 teeth teeth width 10mm SKU: 22499430](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-30-teeth-teeth-width-10mm-sku-22499430/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 25 teeth teeth width 10mm SKU: 22499425](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-25-teeth-teeth-width-10mm-sku-22499425/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 120 teeth teeth width 10mm SKU: 22499412](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-120-teeth-teeth-width-10mm-sku-22499412/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 100 teeth teeth width 10mm SKU: 22499410](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-100-teeth-teeth-width-10mm-sku-22499410/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Precision gear rack module 1 15x15x500mm long material 16MnCr5 teeth induction hardened ground all-sides SKU: 22468300](https://maedler.in/product/precision-gear-rack-module-1-15x15x500mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sides-sku-22468300/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Round gear rack made of high strength steel module = 1 diameter = 10 mm h9 length = 1000 mm SKU: 22466632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-1-diameter-10-mm-h9-length-1000-mm-sku-22466632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 1 diameter = 10 mm h9 length = 500 mm SKU: 22466631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-1-diameter-10-mm-h9-length-500-mm-sku-22466631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Gear rack steel C45K module 1 width 10mm height 10mm length 1000mm helical tooth 20° left handed SKU: 22465800](https://maedler.in/product/gear-rack-steel-c45k-module-1-width-10mm-height-10mm-length-1000mm-helical-tooth-20-left-handed-sku-22465800/): Material: Steel C45K, milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention:These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Gear rack steel C45K module 1 width 10mm height 10mm length 500mm helical tooth 20° left handed SKU: 22465500](https://maedler.in/product/gear-rack-steel-c45k-module-1-width-10mm-height-10mm-length-500mm-helical-tooth-20-left-handed-sku-22465500/): Material: Steel C45K, milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention:These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Round gear rack made of steel module 1 diameter 10mm h6 length 1000mm SKU: 22463200](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-10mm-h6-length-1000mm-sku-22463200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 1 diameter 10mm h6 length 500mm SKU: 22463100](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-10mm-h6-length-500mm-sku-22463100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1, diameter = 10 mm h6 length = 250 mm SKU: 22463000](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-10-mm-h6-length-250-mm-sku-22463000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 1 tooth width 15mm height 15mm length 1000mm SKU: 22461200](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-15mm-height-15mm-length-1000mm-sku-22461200/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1 tooth width 15mm height 15mm length 500mm SKU: 22461000](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-15mm-height-15mm-length-500mm-sku-22461000/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1 tooth width 10mm height 10mm length 1000mm SKU: 22460800](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-10mm-height-10mm-length-1000mm-sku-22460800/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K   module 1   tooth width 10mm height 10mm    length 500mm SKU: 22460500](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-10mm-height-10mm-length-500mm-sku-22460500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1 tooth width 10mm height 10mm length 250mm SKU: 22460300](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-10mm-height-10mm-length-250mm-sku-22460300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of steel C45 module 1 90 teeth tooth width 10mm outside diameter 115mm SKU: 22449000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-90-teeth-tooth-width-10mm-outside-diameter-115mm-sku-22449000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 80 teeth tooth width 10mm outside diameter 105mm SKU: 22448000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-80-teeth-tooth-width-10mm-outside-diameter-105mm-sku-22448000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 72 teeth tooth width 10mm outside diameter 100mm SKU: 22447200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-72-teeth-tooth-width-10mm-outside-diameter-100mm-sku-22447200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 70 teeth tooth width 10mm outside diameter 95mm SKU: 22447000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-70-teeth-tooth-width-10mm-outside-diameter-95mm-sku-22447000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 60 teeth tooth width 10mm outside diameter 85mm SKU: 22446000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-60-teeth-tooth-width-10mm-outside-diameter-85mm-sku-22446000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 50 teeth tooth width 10mm outside diameter 75mm SKU: 22445000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-50-teeth-tooth-width-10mm-outside-diameter-75mm-sku-22445000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 48 teeth tooth width 10mm outside diameter 75mm SKU: 22444800](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-48-teeth-tooth-width-10mm-outside-diameter-75mm-sku-22444800/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 45 teeth tooth width 10mm outside diameter 70mm SKU: 22444500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-45-teeth-tooth-width-10mm-outside-diameter-70mm-sku-22444500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 40 teeth tooth width 10mm outside diameter 65mm SKU: 22444000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-40-teeth-tooth-width-10mm-outside-diameter-65mm-sku-22444000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 36 teeth tooth width 10mm outside diameter 60mm SKU: 22443600](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-36-teeth-tooth-width-10mm-outside-diameter-60mm-sku-22443600/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 30 teeth tooth width 10mm outside diameter 55mm SKU: 22443000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-30-teeth-tooth-width-10mm-outside-diameter-55mm-sku-22443000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 25 teeth tooth width 10mm outside diameter 50mm SKU: 22442500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-25-teeth-tooth-width-10mm-outside-diameter-50mm-sku-22442500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 120 teeth tooth width 10mm outside diameter 150mm SKU: 22441200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-120-teeth-tooth-width-10mm-outside-diameter-150mm-sku-22441200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 100 teeth tooth width 10mm outside diameter 125mm SKU: 22441000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-100-teeth-tooth-width-10mm-outside-diameter-125mm-sku-22441000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 1.0 tooth width 15mm height 15mm nominal length 2000mm SKU: 22411619](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-0-tooth-width-15mm-height-15mm-nominal-length-2000mm-sku-22411619/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.0 tooth width 15mm height 15mm nominal length 1000mm SKU: 22411612](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-0-tooth-width-15mm-height-15mm-nominal-length-1000mm-sku-22411612/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.0 tooth width 10mm height 10mm nominal length 2000mm SKU: 22411609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-0-tooth-width-10mm-height-10mm-nominal-length-2000mm-sku-22411609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.0 tooth width 10mm height 10mm nominal length 1000mm SKU: 22411608](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-0-tooth-width-10mm-height-10mm-nominal-length-1000mm-sku-22411608/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel module 1.0 tooth width 7mm height 5mm length 250mm SKU: 22360100](https://maedler.in/product/gear-rack-made-of-steel-module-1-0-tooth-width-7mm-height-5mm-length-250mm-sku-22360100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel module 0.7 tooth width 5mm height 7mm length 250mm SKU: 22260100](https://maedler.in/product/gear-rack-made-of-steel-module-0-7-tooth-width-5mm-height-7mm-length-250mm-sku-22260100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel module 0.5 tooth width 4mm height 6mm length 250mm SKU: 22160100](https://maedler.in/product/gear-rack-made-of-steel-module-0-5-tooth-width-4mm-height-6mm-length-250mm-sku-22160100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Spur gear made of steel 11SMnPb30 with hub module 1 50 teeth tooth width 10mm helical tooth 20° left handed outside diameter 55.2mm SKU: 21435000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-50-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-55-2mm-sku-21435000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 40 teeth tooth width 10mm helical tooth 20° left handed outside diameter 44.6mm SKU: 21434000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-40-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-44-6mm-sku-21434000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 36 teeth tooth width 10mm helical tooth 20° left handed outside diameter 40.3mm SKU: 21433600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-36-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-40-3mm-sku-21433600/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 30 teeth tooth width 10mm helical tooth 20° left handed outside diameter 33.9mm SKU: 21433000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-30-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-33-9mm-sku-21433000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 2000mm SKU: 24360900](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-2000mm-sku-24360900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 1500mm SKU: 24360700](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-1500mm-sku-24360700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 1000mm SKU: 24360500](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-1000mm-sku-24360500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 500mm SKU: 24360300](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-500mm-sku-24360300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 25mm height 30mm length 1000mm SKU: 24360100](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-25mm-height-30mm-length-1000mm-sku-24360100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 3 tooth width 25mm height 30mm length approx. 120mm SKU: 24360000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-3-tooth-width-25mm-height-30mm-length-approx-120mm-sku-24360000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Internal gear made of steel C45 module 3 80 teeth tooth width 30mm outside diameter 310mm SKU: 24348000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-80-teeth-tooth-width-30mm-outside-diameter-310mm-sku-24348000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 3 60 teeth tooth width 30mm outside diameter 250mm SKU: 24346000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-60-teeth-tooth-width-30mm-outside-diameter-250mm-sku-24346000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 3 50 teeth tooth width 30mm outside diameter 220mm SKU: 24345000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-50-teeth-tooth-width-30mm-outside-diameter-220mm-sku-24345000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 3 30 teeth tooth width 30mm outside diameter 160mm SKU: 24343000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-30-teeth-tooth-width-30mm-outside-diameter-160mm-sku-24343000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 3 100 teeth tooth width 30mm outside diameter 370mm SKU: 24341000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-100-teeth-tooth-width-30mm-outside-diameter-370mm-sku-24341000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 3 tooth width 30mm height 30mm nominal length 2000mm SKU: 24311609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-3-tooth-width-30mm-height-30mm-nominal-length-2000mm-sku-24311609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 3 tooth width 30mm height 30mm nominal length 1000mm SKU: 24311605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-3-tooth-width-30mm-height-30mm-nominal-length-1000mm-sku-24311605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of 1.4305 module 2 SKU: 24299634](https://maedler.in/product/round-gear-rack-made-of-1-4305-module-2-sku-24299634/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 2.5 diameter 25mm h9 length 1000mm SKU: 24299632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-2-5-diameter-25mm-h9-length-1000mm-sku-24299632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 2.5 diameter 25mm h9 length 500mm SKU: 24299631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-2-5-diameter-25mm-h9-length-500mm-sku-24299631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 2000mm SKU: 24299609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-2000mm-sku-24299609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 1500mm SKU: 24299607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-1500mm-sku-24299607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 1000mm SKU: 24299605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-1000mm-sku-24299605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 500mm SKU: 24299603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-500mm-sku-24299603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 250mm SKU: 24299602](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-250mm-sku-24299602/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length approx. 100mm SKU: 24299600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-approx-100mm-sku-24299600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 2,5 tooth width 25mm height 25mm length 2000mm teeth induction hardened SKU: 24288609](https://maedler.in/product/gear-rack-steel-c45k-module-25-tooth-width-25mm-height-25mm-length-2000mm-teeth-induction-hardened-sku-24288609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2,5 tooth width 25mm height 25mm length 1000mm teeth induction hardened SKU: 24288605](https://maedler.in/product/gear-rack-steel-c45k-module-25-tooth-width-25mm-height-25mm-length-1000mm-teeth-induction-hardened-sku-24288605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 2,5 diameter = 25 mm h6 length = 2000 mm SKU: 24266634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-25-diameter-25-mm-h6-length-2000-mm-sku-24266634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 2,5 diameter = 25 mm h6 length = 1000 mm SKU: 24266632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-25-diameter-25-mm-h6-length-1000-mm-sku-24266632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 2,5 diameter = 25 mm h6 length = 500 mm SKU: 24266631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-25-diameter-25-mm-h6-length-500-mm-sku-24266631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel C45 module 2.5 diameter 25mm h6 length 2000mm SKU: 24263400](https://maedler.in/product/round-gear-rack-made-of-steel-c45-module-2-5-diameter-25mm-h6-length-2000mm-sku-24263400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 2.5 diameter 25mm h6 length 1000mm SKU: 24263200](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-5-diameter-25mm-h6-length-1000mm-sku-24263200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 2.5 diameter 25mm h6 length 500mm SKU: 24263100](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-5-diameter-25mm-h6-length-500mm-sku-24263100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 2,5 diameter = 25 mm h6 length = 250mm SKU: 24263000](https://maedler.in/product/round-gear-rack-made-of-steel-module-25-diameter-25-mm-h6-length-250mm-sku-24263000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 2.5 tooth width 25mm height 25mm length 2000mm SKU: 24260900](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-25mm-height-25mm-length-2000mm-sku-24260900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.5 tooth width 25mm height 25mm length 1500mm SKU: 24260700](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-25mm-height-25mm-length-1500mm-sku-24260700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.5 tooth width 25mm height 25mm length 1000mm SKU: 24260500](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-25mm-height-25mm-length-1000mm-sku-24260500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.5 tooth width 25mm height 25mm length 500mm SKU: 24260300](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-25mm-height-25mm-length-500mm-sku-24260300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.5 tooth width 20mm height 25mm length 1000mm SKU: 24260100](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-20mm-height-25mm-length-1000mm-sku-24260100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 2.5 tooth width 20mm height 25mm length approx. 100mm SKU: 24260000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-2-5-tooth-width-20mm-height-25mm-length-approx-100mm-sku-24260000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Internal gear made of steel C45 module 2.5 80 teeth tooth width 25mm outside diameter 260mm SKU: 24248000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-80-teeth-tooth-width-25mm-outside-diameter-260mm-sku-24248000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 60 teeth tooth width 25mm outside diameter 210mm SKU: 24246000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-210mm-sku-24246000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 50 teeth tooth width 25mm outside diameter 180mm SKU: 24245000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-180mm-sku-24245000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 30 teeth tooth width 25mm outside diameter 135mm SKU: 24243000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-135mm-sku-24243000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 120 teeth tooth width 25mm outside diameter 360mm SKU: 24241200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-120-teeth-tooth-width-25mm-outside-diameter-360mm-sku-24241200/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 100 teeth tooth width 25mm outside diameter 310mm SKU: 24241000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-100-teeth-tooth-width-25mm-outside-diameter-310mm-sku-24241000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 2.5 tooth width 25mm height 25mm nominal length 2000mm SKU: 24211609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-2-5-tooth-width-25mm-height-25mm-nominal-length-2000mm-sku-24211609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 2.5 tooth width 25mm height 25mm nominal length 1000mm SKU: 24211605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-2-5-tooth-width-25mm-height-25mm-nominal-length-1000mm-sku-24211605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of 1.4305 module 2 diameter 20mm h9 length 2000mm SKU: 24199634](https://maedler.in/product/round-gear-rack-made-of-1-4305-module-2-diameter-20mm-h9-length-2000mm-sku-24199634/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 2 diameter 20mm h9 length 1000mm SKU: 24199632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-2-diameter-20mm-h9-length-1000mm-sku-24199632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 2 diameter 20mm h9 length 500mm SKU: 24199631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-2-diameter-20mm-h9-length-500mm-sku-24199631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 2000mm SKU: 24199609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-2000mm-sku-24199609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 1500mm SKU: 24199607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-1500mm-sku-24199607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 1000mm SKU: 24199605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-1000mm-sku-24199605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 500mm SKU: 24199603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-500mm-sku-24199603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 250mm SKU: 24199602](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-250mm-sku-24199602/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 2 tooth width 20mm height 20mm length approx. 80mm SKU: 24199600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-approx-80mm-sku-24199600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 2 tooth width 20mm height 20mm length 2000mm teeth induction hardened SKU: 24188609](https://maedler.in/product/gear-rack-steel-c45k-module-2-tooth-width-20mm-height-20mm-length-2000mm-teeth-induction-hardened-sku-24188609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2 tooth width 20mm height 20mm length 1000mm teeth induction hardened SKU: 24188605](https://maedler.in/product/gear-rack-steel-c45k-module-2-tooth-width-20mm-height-20mm-length-1000mm-teeth-induction-hardened-sku-24188605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Precision gear rack module 2.0 20 x 20 x1000mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 24168500](https://maedler.in/product/precision-gear-rack-module-2-0-20-x-20-x1000mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-24168500/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Precision gear rack module 2.0 20 x 20 x 500mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 24168300](https://maedler.in/product/precision-gear-rack-module-2-0-20-x-20-x-500mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-24168300/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Precision mounting aid for gear racks steel 16MnCr5 module 2 tooth width 20mm height 20mm length approx. 80mm teeth hardened ground SKU: 24168000](https://maedler.in/product/precision-mounting-aid-for-gear-racks-steel-16mncr5-module-2-tooth-width-20mm-height-20mm-length-approx-80mm-teeth-hardened-ground-sku-24168000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of high strength steel module = 2 diameter = 20 mm h6 length = 2000 mm SKU: 24166634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-2-diameter-20-mm-h6-length-2000-mm-sku-24166634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 2 diameter = 20 mm h6 length = 1000 mm SKU: 24166632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-2-diameter-20-mm-h6-length-1000-mm-sku-24166632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 2 diameter = 20 mm h6 length = 500 mm SKU: 24166631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-2-diameter-20-mm-h6-length-500-mm-sku-24166631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel C45 module 2 diameter 20mm h6 length 2000mm SKU: 24163400](https://maedler.in/product/round-gear-rack-made-of-steel-c45-module-2-diameter-20mm-h6-length-2000mm-sku-24163400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 2 diameter 20mm h6 length 1000mm SKU: 24163200](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-diameter-20mm-h6-length-1000mm-sku-24163200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 2 diameter 20mm h6 length 500mm SKU: 24163100](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-diameter-20mm-h6-length-500mm-sku-24163100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 2, diameter = 20 mm h6 length = 250 mm SKU: 24163000](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-diameter-20-mm-h6-length-250-mm-sku-24163000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 2.0 tooth width 20mm height 20mm length 2000mm SKU: 24160900](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-20mm-height-20mm-length-2000mm-sku-24160900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.0 tooth width 20mm height 20mm length 1500mm SKU: 24160700](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-20mm-height-20mm-length-1500mm-sku-24160700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.0 tooth width 20mm height 20mm length 1000mm SKU: 24160500](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-20mm-height-20mm-length-1000mm-sku-24160500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.0 tooth width 20mm height 20mm length 500mm SKU: 24160300](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-20mm-height-20mm-length-500mm-sku-24160300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.0 tooth width 16mm height 20mm length 1000mm SKU: 24160100](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-16mm-height-20mm-length-1000mm-sku-24160100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 2 tooth width 16mm height 20mm length approx. 80mm SKU: 24160000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-2-tooth-width-16mm-height-20mm-length-approx-80mm-sku-24160000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Internal gear made of steel C45 module 2 90 teeth tooth width 16mm outside diameter 220mm SKU: 24149000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-90-teeth-tooth-width-16mm-outside-diameter-220mm-sku-24149000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 80 teeth tooth width 16mm outside diameter 195mm SKU: 24148000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-80-teeth-tooth-width-16mm-outside-diameter-195mm-sku-24148000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 72 teeth tooth width 16mm outside diameter 185mm SKU: 24147200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-72-teeth-tooth-width-16mm-outside-diameter-185mm-sku-24147200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 70 teeth tooth width 16mm outside diameter 175mm SKU: 24147000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-70-teeth-tooth-width-16mm-outside-diameter-175mm-sku-24147000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 65 teeth tooth width 16mm outside diameter 165mm SKU: 24146500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-65-teeth-tooth-width-16mm-outside-diameter-165mm-sku-24146500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 60 teeth tooth width 16mm outside diameter 155mm SKU: 24146000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-60-teeth-tooth-width-16mm-outside-diameter-155mm-sku-24146000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 55 teeth tooth width 16mm outside diameter 145mm SKU: 24145500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-55-teeth-tooth-width-16mm-outside-diameter-145mm-sku-24145500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 50 teeth tooth width 16mm outside diameter 135mm SKU: 24145000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-50-teeth-tooth-width-16mm-outside-diameter-135mm-sku-24145000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 48 teeth tooth width 16mm outside diameter 131mm SKU: 24144800](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-48-teeth-tooth-width-16mm-outside-diameter-131mm-sku-24144800/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 45 teeth tooth width 16mm outside diameter 125mm SKU: 24144500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-45-teeth-tooth-width-16mm-outside-diameter-125mm-sku-24144500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 40 teeth tooth width 16mm outside diameter 115mm SKU: 24144000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-40-teeth-tooth-width-16mm-outside-diameter-115mm-sku-24144000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 36 teeth tooth width 16mm outside diameter 107mm SKU: 24143600](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-36-teeth-tooth-width-16mm-outside-diameter-107mm-sku-24143600/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 30 teeth tooth width 16mm outside diameter 95mm SKU: 24143000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-30-teeth-tooth-width-16mm-outside-diameter-95mm-sku-24143000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 120 teeth tooth width 16mm outside diameter 280mm SKU: 24141200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-120-teeth-tooth-width-16mm-outside-diameter-280mm-sku-24141200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 100 teeth tooth width 16mm outside diameter 240mm SKU: 24141000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-100-teeth-tooth-width-16mm-outside-diameter-240mm-sku-24141000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 2 tooth width 20mm height 20mm nominal length 2000mm SKU: 24111609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-2-tooth-width-20mm-height-20mm-nominal-length-2000mm-sku-24111609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 2 tooth width 20mm height 20mm nominal length 1000mm SKU: 24111605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-2-tooth-width-20mm-height-20mm-nominal-length-1000mm-sku-24111605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of steel, module = 1,5 diameter = 17 mm h6 length = 1000 mm SKU: 22963200](https://maedler.in/product/round-gear-rack-made-of-steel-module-15-diameter-17-mm-h6-length-1000-mm-sku-22963200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1,5 diameter = 17 mm h6 length = 500 mm SKU: 22963100](https://maedler.in/product/round-gear-rack-made-of-steel-module-15-diameter-17-mm-h6-length-500-mm-sku-22963100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1,5 diameter = 17 mm h6 length = 250 mm SKU: 22963000](https://maedler.in/product/round-gear-rack-made-of-steel-module-15-diameter-17-mm-h6-length-250-mm-sku-22963000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of stainless steel 1.4305 module 1.5 diameter 15mm h9 length 1000mm SKU: 22899632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-1-5-diameter-15mm-h9-length-1000mm-sku-22899632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 1.5 diameter 15mm h9 length 500mm SKU: 22899631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-1-5-diameter-15mm-h9-length-500mm-sku-22899631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length 1500mm SKU: 22899607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-1500mm-sku-22899607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length 1000mm SKU: 22899605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-1000mm-sku-22899605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length 500mm SKU: 22899603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-500mm-sku-22899603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length 250mm SKU: 22899602](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-250mm-sku-22899602/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length approx. 60mm SKU: 22899600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-approx-60mm-sku-22899600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Precision gear rack module 1.5 15x15x1000mm material 16MnCr5 teeth induction hardened ground all-sided SKU: 22868500](https://maedler.in/product/precision-gear-rack-module-1-5-15x15x1000mm-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-22868500/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Precision spur gear made of steel 16MnCr5 module 2 39 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 86.8mm SKU: 25103932](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-39-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-86-8mm-sku-25103932/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 36 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 80.4mm SKU: 25103635](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-36-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-80-4mm-sku-25103635/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 32 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 71.9mm SKU: 25103235](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-32-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-71-9mm-sku-25103235/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 32 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 71.9mm SKU: 25103225](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-32-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-71-9mm-sku-25103225/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 32 teeth bore 20H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 71.9mm SKU: 25103220](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-32-teeth-bore-20h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-71-9mm-sku-25103220/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103032](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103032/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 30H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103030](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-30h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103030/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103025/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103022](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103022/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 20H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-20h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103020/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 16H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103016](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-16h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103016/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 28 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 63.4mm SKU: 25102835](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-28-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-63-4mm-sku-25102835/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 25 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 57.1mm SKU: 25102525](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-25-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-57-1mm-sku-25102525/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 25 teeth bore 20H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 57.1mm SKU: 25102520](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-25-teeth-bore-20h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-57-1mm-sku-25102520/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 21 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 48.6mm SKU: 25102122](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-21-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-48-6mm-sku-25102122/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 21 teeth bore 16H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 48.6mm SKU: 25102116](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-21-teeth-bore-16h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-48-6mm-sku-25102116/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 20 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 46.4mm SKU: 25102022](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-20-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-46-4mm-sku-25102022/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 20 teeth bore 20H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 46.4mm SKU: 25102020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-20-teeth-bore-20h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-46-4mm-sku-25102020/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Gear rack steel C45K module 10 tooth width 100mm height 100mm length 1500mm SKU: 24960500](https://maedler.in/product/gear-rack-steel-c45k-module-10-tooth-width-100mm-height-100mm-length-1500mm-sku-24960500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 10 tooth width 100mm height 100mm length 1000mm SKU: 24960300](https://maedler.in/product/gear-rack-steel-c45k-module-10-tooth-width-100mm-height-100mm-length-1000mm-sku-24960300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 8 tooth width 80mm height 80mm length 1500mm SKU: 24860300](https://maedler.in/product/gear-rack-steel-c45k-module-8-tooth-width-80mm-height-80mm-length-1500mm-sku-24860300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 8 tooth width 80mm height 80mm length 1000mm SKU: 24860100](https://maedler.in/product/gear-rack-steel-c45k-module-8-tooth-width-80mm-height-80mm-length-1000mm-sku-24860100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 8 tooth width 80mm height 80mm length approx. 324mm SKU: 24860000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-8-tooth-width-80mm-height-80mm-length-approx-324mm-sku-24860000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 2000mm teeth induction hardened SKU: 24688609](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-2000mm-teeth-induction-hardened-sku-24688609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 1000mm teeth induction hardened SKU: 24688605](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-1000mm-teeth-induction-hardened-sku-24688605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 6 diameter = 60 mm h6 length = 2000 mm SKU: 24666634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-6-diameter-60-mm-h6-length-2000-mm-sku-24666634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 6 diameter = 60 mm h6 length = 1000 mm SKU: 24666632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-6-diameter-60-mm-h6-length-1000-mm-sku-24666632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 6 diameter = 60 mm h6 length = 500 mm SKU: 24666631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-6-diameter-60-mm-h6-length-500-mm-sku-24666631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel module 6 diameter 60mm h6 length 2000mm SKU: 24663400](https://maedler.in/product/round-gear-rack-made-of-steel-module-6-diameter-60mm-h6-length-2000mm-sku-24663400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 6 diameter 60mm h6 length 1000mm SKU: 24663200](https://maedler.in/product/round-gear-rack-made-of-steel-module-6-diameter-60mm-h6-length-1000mm-sku-24663200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 6 diameter 60mm h6 length 500mm SKU: 24663100](https://maedler.in/product/round-gear-rack-made-of-steel-module-6-diameter-60mm-h6-length-500mm-sku-24663100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 2000mm SKU: 24660700](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-2000mm-sku-24660700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 1500mm SKU: 24660500](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-1500mm-sku-24660500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 1000mm SKU: 24660300](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-1000mm-sku-24660300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 500mm SKU: 24660100](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-500mm-sku-24660100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 6 tooth width 60mm height 60mm length approx. 241mm SKU: 24660000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-approx-241mm-sku-24660000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack made of steel C45 black oxide finished module 6 tooth width 60mm height 60mm nominal length 2000mm SKU: 24611609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-6-tooth-width-60mm-height-60mm-nominal-length-2000mm-sku-24611609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 6 tooth width 60mm height 60mm nominal length 1000mm SKU: 24611605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-6-tooth-width-60mm-height-60mm-nominal-length-1000mm-sku-24611605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 2000mm teeth induction hardened SKU: 24588609](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-2000mm-teeth-induction-hardened-sku-24588609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 1000mm teeth induction hardened SKU: 24588605](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-1000mm-teeth-induction-hardened-sku-24588605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 5 diameter = 50 mm h6 length = 2000 mm SKU: 24566634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-5-diameter-50-mm-h6-length-2000-mm-sku-24566634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 5 diameter = 50 mm h6 length = 1000 mm SKU: 24566632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-5-diameter-50-mm-h6-length-1000-mm-sku-24566632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 5 diameter = 50 mm h6 length = 500 mm SKU: 24566631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-5-diameter-50-mm-h6-length-500-mm-sku-24566631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel module 5 diameter 50mm h6 length 2000mm SKU: 24563400](https://maedler.in/product/round-gear-rack-made-of-steel-module-5-diameter-50mm-h6-length-2000mm-sku-24563400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 5 diameter 50mm h6 length 1000mm SKU: 24563200](https://maedler.in/product/round-gear-rack-made-of-steel-module-5-diameter-50mm-h6-length-1000mm-sku-24563200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 5 diameter 50mm h6 length 500mm SKU: 24563100](https://maedler.in/product/round-gear-rack-made-of-steel-module-5-diameter-50mm-h6-length-500mm-sku-24563100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 5, diameter = 50 mm h6 length =250 mm SKU: 24563000](https://maedler.in/product/round-gear-rack-made-of-steel-module-5-diameter-50-mm-h6-length-250-mm-sku-24563000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 2000mm SKU: 24560900](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-2000mm-sku-24560900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 1500mm SKU: 24560700](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-1500mm-sku-24560700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 1000mm SKU: 24560500](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-1000mm-sku-24560500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 500mm SKU: 24560300](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-500mm-sku-24560300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 40mm height 50mm length 1000mm SKU: 24560100](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-40mm-height-50mm-length-1000mm-sku-24560100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 5 tooth width 40mm height 50mm length approx. 201mm SKU: 24560000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-5-tooth-width-40mm-height-50mm-length-approx-201mm-sku-24560000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack made of steel C45 black oxide finished module 5 tooth width 50mm height 50mm nominal length 2000mm SKU: 24511609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-5-tooth-width-50mm-height-50mm-nominal-length-2000mm-sku-24511609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 5 tooth width 50mm height 50mm nominal length 1000mm SKU: 24511605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-5-tooth-width-50mm-height-50mm-nominal-length-1000mm-sku-24511605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of 1.4305 module 4 diameter 40mm h9 length 2000mm SKU: 24499634](https://maedler.in/product/round-gear-rack-made-of-1-4305-module-4-diameter-40mm-h9-length-2000mm-sku-24499634/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 4 diameter 40mm h9 length 1000mm SKU: 24499632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-4-diameter-40mm-h9-length-1000mm-sku-24499632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 4 diameter 40mm h9 length 500mm SKU: 24499631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-4-diameter-40mm-h9-length-500mm-sku-24499631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 4 tooth width 40mm height 40mm length 2000mm SKU: 24499609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-2000mm-sku-24499609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 4 tooth width 40mm height 40mm length 1500mm SKU: 24499607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-1500mm-sku-24499607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 4 tooth width 40mm height 40mm length 1000mm SKU: 24499605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-1000mm-sku-24499605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 4 tooth width 40mm height 40mm length 500mm SKU: 24499603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-500mm-sku-24499603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 4 tooth width 40mm height 40mm length approx. 162mm SKU: 24499600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-approx-162mm-sku-24499600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 2000mm teeth induction hardened SKU: 24488609](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-2000mm-teeth-induction-hardened-sku-24488609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 1000mm teeth induction hardened SKU: 24488605](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-1000mm-teeth-induction-hardened-sku-24488605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 4 diameter = 40 mm h6 length = 2000 mm SKU: 24466634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-4-diameter-40-mm-h6-length-2000-mm-sku-24466634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 4 diameter = 40 mm h6 length = 1000 mm SKU: 24466632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-4-diameter-40-mm-h6-length-1000-mm-sku-24466632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 4 diameter = 40 mm h6 length = 500 mm SKU: 24466631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-4-diameter-40-mm-h6-length-500-mm-sku-24466631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel C45K module 4 diameter 40mm h6 length 2000mm SKU: 24463400](https://maedler.in/product/round-gear-rack-made-of-steel-c45k-module-4-diameter-40mm-h6-length-2000mm-sku-24463400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 4 diameter 40mm h6 length 1000mm SKU: 24463200](https://maedler.in/product/round-gear-rack-made-of-steel-module-4-diameter-40mm-h6-length-1000mm-sku-24463200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 4 diameter 40mm h6 length 500mm SKU: 24463100](https://maedler.in/product/round-gear-rack-made-of-steel-module-4-diameter-40mm-h6-length-500mm-sku-24463100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 4, diameter = 40 mm h6 length = 250mm SKU: 24463000](https://maedler.in/product/round-gear-rack-made-of-steel-module-4-diameter-40-mm-h6-length-250mm-sku-24463000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 2000mm SKU: 24460900](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-2000mm-sku-24460900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 1500mm SKU: 24460700](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-1500mm-sku-24460700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 1000mm SKU: 24460500](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-1000mm-sku-24460500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 500mm SKU: 24460300](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-500mm-sku-24460300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 30mm height 40mm length 1000mm SKU: 24460100](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-30mm-height-40mm-length-1000mm-sku-24460100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 4 tooth width 30mm height 40mm length approx. 162mm SKU: 24460000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-4-tooth-width-30mm-height-40mm-length-approx-162mm-sku-24460000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack made of steel C45 black oxide finished module 4 tooth width 40mm height 40mm nominal length 2000mm SKU: 24411609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-4-tooth-width-40mm-height-40mm-nominal-length-2000mm-sku-24411609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 4 tooth width 40mm height 40mm nominal length 1000mm SKU: 24411605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-4-tooth-width-40mm-height-40mm-nominal-length-1000mm-sku-24411605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of 1.4305 module 3 diameter 30mm h9 length 2000mm SKU: 24399634](https://maedler.in/product/round-gear-rack-made-of-1-4305-module-3-diameter-30mm-h9-length-2000mm-sku-24399634/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 3 diameter 30mm h9 length 1000mm SKU: 24399632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-3-diameter-30mm-h9-length-1000mm-sku-24399632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 3 diameter 30mm h9 length 500mm SKU: 24399631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-3-diameter-30mm-h9-length-500mm-sku-24399631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 3 tooth width 30mm height 30mm length 2000mm SKU: 24399609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-2000mm-sku-24399609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 3 tooth width 30mm height 30mm length 1500mm SKU: 24399607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-1500mm-sku-24399607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 3 tooth width 30mm height 30mm length 1000mm SKU: 24399605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-1000mm-sku-24399605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 3 tooth width 30mm height 30mm length 500mm SKU: 24399603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-500mm-sku-24399603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 3 tooth width 30mm height 30mm length approx. 120mm SKU: 24399600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-approx-120mm-sku-24399600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 2000mm teeth induction hardened SKU: 24388609](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-2000mm-teeth-induction-hardened-sku-24388609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 1000mm teeth induction hardened SKU: 24388605](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-1000mm-teeth-induction-hardened-sku-24388605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Precision gear rack module 3 25 x 25 x 1000mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 24368500](https://maedler.in/product/precision-gear-rack-module-3-25-x-25-x-1000mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-24368500/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Precision gear rack module 3 25 x 25 x 500mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 24368300](https://maedler.in/product/precision-gear-rack-module-3-25-x-25-x-500mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-24368300/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Precision mounting aid for gear racks steel 16MnCr5 module 3 tooth width 25mm height 25mm length approx. 120mm teeth hardened ground SKU: 24368000](https://maedler.in/product/precision-mounting-aid-for-gear-racks-steel-16mncr5-module-3-tooth-width-25mm-height-25mm-length-approx-120mm-teeth-hardened-ground-sku-24368000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of high strength steel module = 3 diameter = 30 mm h6 length = 2000 mm SKU: 24366634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-3-diameter-30-mm-h6-length-2000-mm-sku-24366634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 3 diameter = 30 mm h6 length = 1000 mm SKU: 24366632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-3-diameter-30-mm-h6-length-1000-mm-sku-24366632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 3 diameter = 30 mm h6 length = 500 mm SKU: 24366631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-3-diameter-30-mm-h6-length-500-mm-sku-24366631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel C45 module 3 diameter 30mm h6 length 2000mm SKU: 24363400](https://maedler.in/product/round-gear-rack-made-of-steel-c45-module-3-diameter-30mm-h6-length-2000mm-sku-24363400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 3 diameter 30mm h6 length 1000mm SKU: 24363200](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-diameter-30mm-h6-length-1000mm-sku-24363200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 3 diameter 30mm h6 length 500mm SKU: 24363100](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-diameter-30mm-h6-length-500mm-sku-24363100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 3, diameter = 30 mm h6 length = 250mm SKU: 24363000](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-diameter-30-mm-h6-length-250mm-sku-24363000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack made of polyketone die-cast module 3 tooth width 19.4mm height 15mm length 250mm SKU: 28860101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-3-tooth-width-19-4mm-height-15mm-length-250mm-sku-28860101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 3 tooth width 19.4mm height 15mm length 250mm SKU: 28860100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-3-tooth-width-19-4mm-height-15mm-length-250mm-sku-28860100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 2,5 tooth width 17mm height 13mm length 250mm SKU: 28760101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-25-tooth-width-17mm-height-13mm-length-250mm-sku-28760101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketonedie-cast module 2 tooth width 15.4mm height 11mm length 250mm SKU: 28660101](https://maedler.in/product/gear-rack-made-of-polyketonedie-cast-module-2-tooth-width-15-4mm-height-11mm-length-250mm-sku-28660101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 2 tooth width 15.4mm height 11mm length 250mm SKU: 28660100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-2-tooth-width-15-4mm-height-11mm-length-250mm-sku-28660100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 1.5 tooth width 12mm height 12mm length 250mm SKU: 28560101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-1-5-tooth-width-12mm-height-12mm-length-250mm-sku-28560101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 1.5 tooth width 12mm height 12mm length 250mm SKU: 28560100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-1-5-tooth-width-12mm-height-12mm-length-250mm-sku-28560100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 1.25 tooth width 10mm height 11mm length 250mm SKU: 28460101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-1-25-tooth-width-10mm-height-11mm-length-250mm-sku-28460101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 1.25 tooth width 10mm height 11mm length 250mm SKU: 28460100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-1-25-tooth-width-10mm-height-11mm-length-250mm-sku-28460100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 1 tooth width 9mm height 9mm length 250mm SKU: 28360101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-1-tooth-width-9mm-height-9mm-length-250mm-sku-28360101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 1 tooth width 9mm height 9mm length 250mm SKU: 28360100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-1-tooth-width-9mm-height-9mm-length-250mm-sku-28360100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 0.7 tooth width 6mm height 6.7mm length 250mm SKU: 28260101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-0-7-tooth-width-6mm-height-6-7mm-length-250mm-sku-28260101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 0.7 tooth width 6mm height 6.7mm length 250mm SKU: 28260100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-0-7-tooth-width-6mm-height-6-7mm-length-250mm-sku-28260100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 0.5 tooth width 4mm height 6mm length 250mm SKU: 28160201](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-0-5-tooth-width-4mm-height-6mm-length-250mm-sku-28160201/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 0.5 tooth width 4mm height 6mm length 250mm SKU: 28160200](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-0-5-tooth-width-4mm-height-6mm-length-250mm-sku-28160200/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 0.5 tooth width 4mm height 4.5mm length 250mm SKU: 28160101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-0-5-tooth-width-4mm-height-4-5mm-length-250mm-sku-28160101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 0.5 tooth width 4mm height 4.5mm length 250mm SKU: 28160100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-0-5-tooth-width-4mm-height-4-5mm-length-250mm-sku-28160100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of brass Ms 58 module 0.5 width 10mm height 4mm length 500mm helical tooth 20° left handed SKU: 26960600](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-0-5-width-10mm-height-4mm-length-500mm-helical-tooth-20-left-handed-sku-26960600/): Material: Brass Ms58 (2.0401), milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention: These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Gear rack made of brass Ms 58 module 0.5 width 10mm height 4mm length 250mm helical tooth 20° left handed SKU: 26960500](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-0-5-width-10mm-height-4mm-length-250mm-helical-tooth-20-left-handed-sku-26960500/): Material: Brass Ms58 (2.0401), milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention: These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Gear rack made of brass Ms 58 module 0.3 width 5mm height 3mm length 250mm helical tooth 20° left handed SKU: 26960100](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-0-3-width-5mm-height-3mm-length-250mm-helical-tooth-20-left-handed-sku-26960100/): Material: Brass Ms58 (2.0401), milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention: These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Spur gear made of brass Ms58 with hub module 0.5 40 teeth tooth width 10mm helical tooth 20° right handed outside diameter 22.3mm SKU: 26924000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-40-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-22-3mm-sku-26924000/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 34 teeth tooth width 10mm helical tooth 20° right handed outside diameter 19.1mm SKU: 26923400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-34-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-19-1mm-sku-26923400/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 30 teeth tooth width 10mm helical tooth 20° right handed outside diameter 17.0mm SKU: 26923000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-30-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-17-0mm-sku-26923000/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 25 teeth tooth width 10mm helical tooth 20° right handed outside diameter 14.3mm SKU: 26922500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-25-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-14-3mm-sku-26922500/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 22 teeth tooth width 10mm helical tooth 20° right handed outside diameter 12.7mm SKU: 26922200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-22-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-12-7mm-sku-26922200/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 18 teeth tooth width 10mm helical tooth 20° right handed outside diameter 10.6mm SKU: 26921800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-18-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-10-6mm-sku-26921800/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.3 30 teeth tooth width 5mm helical tooth 20° right handed outside diameter 10.2mm SKU: 26903000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-30-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-10-2mm-sku-26903000/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 24 teeth tooth width 5mm helical tooth 20° right handed outside diameter 8.3mm SKU: 26902400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-24-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-8-3mm-sku-26902400/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 20 teeth tooth width 5mm helical tooth 20° right handed outside diameter 7.0mm SKU: 26902000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-20-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-7-0mm-sku-26902000/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 18 teeth tooth width 5mm helical tooth 20° right handed outside diameter 6.4mm SKU: 26901800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-18-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-6-4mm-sku-26901800/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 15 teeth tooth width 5mm helical tooth 20° right handed outside diameter 5.4mm SKU: 26901500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-15-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-5-4mm-sku-26901500/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 12 teeth tooth width 5mm helical tooth 20° right handed outside diameter 4.4mm SKU: 26901200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-12-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-4-4mm-sku-26901200/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Gear rack made of brass Ms 58 module 1 tooth width 10mm height 10mm length 500mm SKU: 26360500](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-1-tooth-width-10mm-height-10mm-length-500mm-sku-26360500/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of brass Ms58 module 1 tooth width 10mm height 10mm length 250mm SKU: 26360300](https://maedler.in/product/gear-rack-made-of-brass-ms58-module-1-tooth-width-10mm-height-10mm-length-250mm-sku-26360300/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of brass Ms 58 module 1 tooth width 10mm height 8mm length 230mm SKU: 26360100](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-1-tooth-width-10mm-height-8mm-length-230mm-sku-26360100/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of brass Ms 58 module 1 tooth width 7mm height 5mm length 250mm SKU: 26360000](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-1-tooth-width-7mm-height-5mm-length-250mm-sku-26360000/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of brass Ms58 module 1 90 teeth tooth width 8mm outside diameter 115mm SKU: 26349000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-90-teeth-tooth-width-8mm-outside-diameter-115mm-sku-26349000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 80 teeth tooth width 8mm outside diameter 105mm SKU: 26348000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-80-teeth-tooth-width-8mm-outside-diameter-105mm-sku-26348000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 70 teeth tooth width 8mm outside diameter 95mm SKU: 26347000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-70-teeth-tooth-width-8mm-outside-diameter-95mm-sku-26347000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 65 teeth tooth width 8mm outside diameter 90mm SKU: 26346500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-65-teeth-tooth-width-8mm-outside-diameter-90mm-sku-26346500/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 60 teeth tooth width 8mm outside diameter 85mm SKU: 26346000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-60-teeth-tooth-width-8mm-outside-diameter-85mm-sku-26346000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 55 teeth tooth width 8mm outside diameter 80mm SKU: 26345500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-55-teeth-tooth-width-8mm-outside-diameter-80mm-sku-26345500/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 50 teeth tooth width 8mm outside diameter 75mm SKU: 26345000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-50-teeth-tooth-width-8mm-outside-diameter-75mm-sku-26345000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 48 teeth tooth width 8mm outside diameter 75mm SKU: 26344800](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-48-teeth-tooth-width-8mm-outside-diameter-75mm-sku-26344800/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 45 teeth tooth width 8mm outside diameter 70mm SKU: 26344500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-45-teeth-tooth-width-8mm-outside-diameter-70mm-sku-26344500/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 40 teeth tooth width 8mm outside diameter 65mm SKU: 26344000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-40-teeth-tooth-width-8mm-outside-diameter-65mm-sku-26344000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 36 teeth tooth width 8mm outside diameter 60mm SKU: 26343600](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-36-teeth-tooth-width-8mm-outside-diameter-60mm-sku-26343600/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 30 teeth tooth width 8mm outside diameter 55mm SKU: 26343000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-30-teeth-tooth-width-8mm-outside-diameter-55mm-sku-26343000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass CuSn4-Zn4Pb4 module 1 120 teeth tooth width 8mm outside diameter 145mm SKU: 26341200](https://maedler.in/product/internal-gear-made-of-brass-cusn4-zn4pb4-module-1-120-teeth-tooth-width-8mm-outside-diameter-145mm-sku-26341200/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass CuSn4Zn4Pb4 module 1 100 teeth tooth width 8mm outside diameter 125mm SKU: 26341000](https://maedler.in/product/internal-gear-made-of-brass-cusn4zn4pb4-module-1-100-teeth-tooth-width-8mm-outside-diameter-125mm-sku-26341000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of brass Ms58 module 0.7 tooth width 4mm height 6mm length 250mm SKU: 26260100](https://maedler.in/product/gear-rack-made-of-brass-ms58-module-0-7-tooth-width-4mm-height-6mm-length-250mm-sku-26260100/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of brass Ms58 module 0.7 90 teeth tooth width 6mm outside diameter 85mm SKU: 26249000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-90-teeth-tooth-width-6mm-outside-diameter-85mm-sku-26249000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 80 teeth tooth width 6mm outside diameter 80mm SKU: 26248000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-80-teeth-tooth-width-6mm-outside-diameter-80mm-sku-26248000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 70 teeth tooth width 6mm outside diameter 70mm SKU: 26247000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-70-teeth-tooth-width-6mm-outside-diameter-70mm-sku-26247000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 60 teeth tooth width 6mm outside diameter 65mm SKU: 26246000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-60-teeth-tooth-width-6mm-outside-diameter-65mm-sku-26246000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 50 teeth tooth width 6mm outside diameter 55mm SKU: 26245000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-50-teeth-tooth-width-6mm-outside-diameter-55mm-sku-26245000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 48 teeth tooth width 6mm outside diameter 55mm SKU: 26244800](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-48-teeth-tooth-width-6mm-outside-diameter-55mm-sku-26244800/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 45 teeth tooth width 6mm outside diameter 50mm SKU: 26244500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-45-teeth-tooth-width-6mm-outside-diameter-50mm-sku-26244500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 40 teeth tooth width 6mm outside diameter 48mm SKU: 26244000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-40-teeth-tooth-width-6mm-outside-diameter-48mm-sku-26244000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 100 teeth tooth width 6mm outside diameter 95mm SKU: 26241000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-100-teeth-tooth-width-6mm-outside-diameter-95mm-sku-26241000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of brass Ms58 module 0.5 tooth width 2mm height 4mm length 250mm SKU: 26160100](https://maedler.in/product/gear-rack-made-of-brass-ms58-module-0-5-tooth-width-2mm-height-4mm-length-250mm-sku-26160100/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of brass Ms58 module 0.5 90 teeth tooth width 4mm outside diameter 70mm SKU: 26149000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-90-teeth-tooth-width-4mm-outside-diameter-70mm-sku-26149000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 70 teeth tooth width 4mm outside diameter 55mm SKU: 26147000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-70-teeth-tooth-width-4mm-outside-diameter-55mm-sku-26147000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 60 teeth tooth width 4mm outside diameter 50mm SKU: 26146000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-60-teeth-tooth-width-4mm-outside-diameter-50mm-sku-26146000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 50 teeth tooth width 4mm outside diameter 45mm SKU: 26145000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-50-teeth-tooth-width-4mm-outside-diameter-45mm-sku-26145000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 48 teeth tooth width 4mm outside diameter 40mm SKU: 26144800](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-48-teeth-tooth-width-4mm-outside-diameter-40mm-sku-26144800/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 45 teeth tooth width 4mm outside diameter 40mm SKU: 26144500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-45-teeth-tooth-width-4mm-outside-diameter-40mm-sku-26144500/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 40 teeth tooth width 4mm outside diameter 36mm SKU: 26144000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-40-teeth-tooth-width-4mm-outside-diameter-36mm-sku-26144000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 100 teeth tooth width 4mm outside diameter 70mm SKU: 26141000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-100-teeth-tooth-width-4mm-outside-diameter-70mm-sku-26141000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of brass Ms58 module 0.3 tooth width 2mm height 4mm length 250mm SKU: 26060100](https://maedler.in/product/gear-rack-made-of-brass-ms58-module-0-3-tooth-width-2mm-height-4mm-length-250mm-sku-26060100/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Precision spur gear made of steel 16MnCr5 module 5 24 teeth bore 55H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 137.3mm SKU: 25502455](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-5-24-teeth-bore-55h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-137-3mm-sku-25502455/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 5 24 teeth bore 45H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 137.3mm SKU: 25502445](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-5-24-teeth-bore-45h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-137-3mm-sku-25502445/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 5 18 teeth bore 45H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 105.5mm SKU: 25501845](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-5-18-teeth-bore-45h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-105-5mm-sku-25501845/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 25 teeth bore 45H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 114.1mm SKU: 25402545](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-25-teeth-bore-45h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-114-1mm-sku-25402545/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 25 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 114.1mm SKU: 25402535](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-25-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-114-1mm-sku-25402535/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 24 teeth bore 55H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 109.9mm SKU: 25402455](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-24-teeth-bore-55h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-109-9mm-sku-25402455/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 24 teeth bore 40H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 109.9mm SKU: 25402440](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-24-teeth-bore-40h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-109-9mm-sku-25402440/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 24 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 109.9mm SKU: 25402435](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-24-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-109-9mm-sku-25402435/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 24 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 109.9mm SKU: 25402432](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-24-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-109-9mm-sku-25402432/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 21 teeth bore 40H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 97.1mm SKU: 25402140](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-21-teeth-bore-40h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-97-1mm-sku-25402140/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 21 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 97.1mm SKU: 25402135](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-21-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-97-1mm-sku-25402135/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 21 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 97.1mm SKU: 25402132](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-21-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-97-1mm-sku-25402132/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 20 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 92.9mm SKU: 25402035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-20-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-92-9mm-sku-25402035/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 18 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 84.4mm SKU: 25401832](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-18-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-84-4mm-sku-25401832/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 15 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 71.7mm SKU: 25401535](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-15-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-71-7mm-sku-25401535/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 40H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302540](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-40h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302540/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302535](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302535/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302532](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302532/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 30H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302530](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-30h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302530/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302525](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302525/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302522](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302522/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 22 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 76.0mm SKU: 25302235](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-22-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-76-0mm-sku-25302235/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 22 teeth bore 30H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 76.0mm SKU: 25302230](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-22-teeth-bore-30h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-76-0mm-sku-25302230/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 22 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 76.0mm SKU: 25302225](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-22-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-76-0mm-sku-25302225/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302035/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302032](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302032/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 30H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302030](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-30h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302030/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302025/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302022](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302022/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 40 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 88.9mm SKU: 25104035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-40-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-88-9mm-sku-25104035/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Bevel gear made of brass Ms58 module 1 30 teeth i=2:1 milled SKU: 35055700](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-30-teeth-i21-milled-sku-35055700/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 15 teeth i=2:1 milled SKU: 35055600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-15-teeth-i21-milled-sku-35055600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 30 teeth i=1.5:1 milled SKU: 35055300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-30-teeth-i1-51-milled-sku-35055300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 20 teeth i=1.5:1 milled SKU: 35055200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-20-teeth-i1-51-milled-sku-35055200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 60 teeth i=1:1 milled SKU: 35053500](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-60-teeth-i11-milled-sku-35053500/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 50 teeth i=1:1 milled SKU: 35053200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-50-teeth-i11-milled-sku-35053200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 40 teeth i=1:1 milled SKU: 35052600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-40-teeth-i11-milled-sku-35052600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 36 teeth i=1:1 milled SKU: 35052300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-36-teeth-i11-milled-sku-35052300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 30 teeth i=1:1 milled SKU: 35052000](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-30-teeth-i11-milled-sku-35052000/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 25 teeth i=1:1 milled SKU: 35051600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-25-teeth-i11-milled-sku-35051600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 20 teeth i=1:1 milled SKU: 35051100](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-20-teeth-i11-milled-sku-35051100/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 16 teeth i=1:1 milled SKU: 35050700](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-16-teeth-i11-milled-sku-35050700/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 12 teeth i=1:1 milled SKU: 35050300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-12-teeth-i11-milled-sku-35050300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 45 teeth i=3:1 milled SKU: 35027700](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-45-teeth-i31-milled-sku-35027700/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 15 teeth i=3:1 milled SKU: 35027600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-15-teeth-i31-milled-sku-35027600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 50 teeth i=2.5:1 milled SKU: 35027300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-50-teeth-i2-51-milled-sku-35027300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 20 teeth i= 2.5:1 milled SKU: 35027200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-20-teeth-i-2-51-milled-sku-35027200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 40 teeth i=2:1 milled SKU: 35026100](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-40-teeth-i21-milled-sku-35026100/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 20 teeth i=2:1 milled SKU: 35026000](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-20-teeth-i21-milled-sku-35026000/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 30 teeth i=1.5:1 milled SKU: 35025300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-30-teeth-i1-51-milled-sku-35025300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 20 teeth i=1.5:1 milled SKU: 35025200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-20-teeth-i1-51-milled-sku-35025200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 50 teeth i=1:1 milled SKU: 35023200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-50-teeth-i11-milled-sku-35023200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 40 teeth i=1:1 milled SKU: 35022600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-40-teeth-i11-milled-sku-35022600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 36 teeth i=1:1 milled SKU: 35022300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-36-teeth-i11-milled-sku-35022300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 30 teeth i=1:1 milled SKU: 35022000](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-30-teeth-i11-milled-sku-35022000/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 24 teeth i=1:1 milled SKU: 35021500](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-24-teeth-i11-milled-sku-35021500/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 20 teeth i=1:1 milled SKU: 35021100](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-20-teeth-i11-milled-sku-35021100/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 15 teeth i=1:1 milled SKU: 35020600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-15-teeth-i11-milled-sku-35020600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [MAEDLER tapered roller bearing 32010X inner-ø 50mm outer-ø 80mm height 20mm SKU: 32010X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32010x-inner-o-50mm-outer-o-80mm-height-20mm-sku-32010x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32009X inner-ø 45mm outer-ø 75mm height 20mm SKU: 32009X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32009x-inner-o-45mm-outer-o-75mm-height-20mm-sku-32009x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32008X inner-ø 40mm outer-ø 68mm height 19mm SKU: 32008X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32008x-inner-o-40mm-outer-o-68mm-height-19mm-sku-32008x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32007X inner-ø 35mm outer-ø 62mm height 18mm SKU: 32007X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32007x-inner-o-35mm-outer-o-62mm-height-18mm-sku-32007x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32006X inner-ø 30mm outer-ø 55mm height 17mm SKU: 32006X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32006x-inner-o-30mm-outer-o-55mm-height-17mm-sku-32006x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32005X inner-ø 25mm outer-ø 47mm height 15mm SKU: 32005X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32005x-inner-o-25mm-outer-o-47mm-height-15mm-sku-32005x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32004X inner-ø 20mm outer-ø 42mm height 15mm SKU: 32004X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32004x-inner-o-20mm-outer-o-42mm-height-15mm-sku-32004x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30310 inner-ø 50mm outer-ø 110mm height 29,25mm SKU: 30310-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30310-inner-o-50mm-outer-o-110mm-height-2925mm-sku-30310-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30309 inner-ø 45mm outer-ø 100mm height 27,25mm SKU: 30309-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30309-inner-o-45mm-outer-o-100mm-height-2725mm-sku-30309-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30308 inner-ø 40mm outer-ø 90mm height 25,25mm SKU: 30308-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30308-inner-o-40mm-outer-o-90mm-height-2525mm-sku-30308-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30307 inner-ø 35mm outer-ø 80mm height 22,75mm SKU: 30307-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30307-inner-o-35mm-outer-o-80mm-height-2275mm-sku-30307-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30306 inner-ø 30mm outer-ø 72mm height 20,75mm SKU: 30306-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30306-inner-o-30mm-outer-o-72mm-height-2075mm-sku-30306-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30305 inner-ø 25mm outer-ø 62mm height 18,25mm SKU: 30305-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30305-inner-o-25mm-outer-o-62mm-height-1825mm-sku-30305-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30304 inner-ø 20mm outer-ø 52mm height 16,25mm SKU: 30304-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30304-inner-o-20mm-outer-o-52mm-height-1625mm-sku-30304-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30303 inner-ø 17mm outer-ø 47mm height 15,25mm SKU: 30303-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30303-inner-o-17mm-outer-o-47mm-height-1525mm-sku-30303-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30302 inner-ø 15mm outer-ø 42mm height 14,25mm SKU: 30302-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30302-inner-o-15mm-outer-o-42mm-height-1425mm-sku-30302-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30210 inner-ø 50mm outer-ø 90mm height 21,75mm SKU: 30210-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30210-inner-o-50mm-outer-o-90mm-height-2175mm-sku-30210-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30209 inner-ø 45mm outer-ø 85mm height 20,75mm SKU: 30209-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30209-inner-o-45mm-outer-o-85mm-height-2075mm-sku-30209-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30208 inner-ø 40mm outer-ø 80mm height 19,75mm SKU: 30208-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30208-inner-o-40mm-outer-o-80mm-height-1975mm-sku-30208-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30207 inner-ø 35mm outer-ø 72mm height 18,25mm SKU: 30207-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30207-inner-o-35mm-outer-o-72mm-height-1825mm-sku-30207-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30206 inner-ø 30mm outer-ø 62mm height 17,25mm SKU: 30206-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30206-inner-o-30mm-outer-o-62mm-height-1725mm-sku-30206-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30205 inner-ø 25mm outer-ø 52mm height 16,25mm SKU: 30205-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30205-inner-o-25mm-outer-o-52mm-height-1625mm-sku-30205-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30204 inner-ø 20mm outer-ø 47mm height 15,25mm SKU: 30204-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30204-inner-o-20mm-outer-o-47mm-height-1525mm-sku-30204-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30203 inner-ø 17mm outer-ø 40mm height 13,25mm SKU: 30203-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30203-inner-o-17mm-outer-o-40mm-height-1325mm-sku-30203-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [Gear rack made of POM module 3 tooth width 25mm height 25mm length 1500mm SKU: 29860700](https://maedler.in/product/gear-rack-made-of-pom-module-3-tooth-width-25mm-height-25mm-length-1500mm-sku-29860700/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 3 tooth width 25mm height 25mm length 1000mm SKU: 29860500](https://maedler.in/product/gear-rack-made-of-pom-module-3-tooth-width-25mm-height-25mm-length-1000mm-sku-29860500/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 3 tooth width 25mm height 25mm length 500mm SKU: 29860300](https://maedler.in/product/gear-rack-made-of-pom-module-3-tooth-width-25mm-height-25mm-length-500mm-sku-29860300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 3 tooth width 30mm height 30mm length 1000mm SKU: 29811705](https://maedler.in/product/gear-rack-made-of-pom-black-module-3-tooth-width-30mm-height-30mm-length-1000mm-sku-29811705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 3 tooth width 30mm height 30mm length 500mm SKU: 29811703](https://maedler.in/product/gear-rack-made-of-pom-black-module-3-tooth-width-30mm-height-30mm-length-500mm-sku-29811703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 3 tooth width 30mm height 30mm length 250mm SKU: 29811701](https://maedler.in/product/gear-rack-made-of-pom-black-module-3-tooth-width-30mm-height-30mm-length-250mm-sku-29811701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 3 tooth width 30mm height 30mm length 1000mm SKU: 29811605](https://maedler.in/product/gear-rack-made-of-pom-white-module-3-tooth-width-30mm-height-30mm-length-1000mm-sku-29811605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 3 tooth width 30mm height 30mm length 500mm SKU: 29811603](https://maedler.in/product/gear-rack-made-of-pom-white-module-3-tooth-width-30mm-height-30mm-length-500mm-sku-29811603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 3 tooth width 30mm height 30mm length 250mm SKU: 29811601](https://maedler.in/product/gear-rack-made-of-pom-white-module-3-tooth-width-30mm-height-30mm-length-250mm-sku-29811601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2.5 tooth width 20mm height 20mm length 1500mm SKU: 29760700](https://maedler.in/product/gear-rack-made-of-pom-module-2-5-tooth-width-20mm-height-20mm-length-1500mm-sku-29760700/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2.5 tooth width 20mm height 20mm length 1000mm SKU: 29760500](https://maedler.in/product/gear-rack-made-of-pom-module-2-5-tooth-width-20mm-height-20mm-length-1000mm-sku-29760500/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2.5 tooth width 20mm height 20mm length 500mm SKU: 29760300](https://maedler.in/product/gear-rack-made-of-pom-module-2-5-tooth-width-20mm-height-20mm-length-500mm-sku-29760300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 2.5 tooth width 25mm height 25mm length 1000mm SKU: 29711705](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-5-tooth-width-25mm-height-25mm-length-1000mm-sku-29711705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 2.5 tooth width 25mm height 25mm length 500mm SKU: 29711703](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-5-tooth-width-25mm-height-25mm-length-500mm-sku-29711703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 2.5 tooth width 25mm height 25mm length 250mm SKU: 29711701](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-5-tooth-width-25mm-height-25mm-length-250mm-sku-29711701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 2.5 tooth width 25mm height 25mm length 1000mm SKU: 29711605](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-5-tooth-width-25mm-height-25mm-length-1000mm-sku-29711605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 2.5 tooth width 25mm height 25mm length 500mm SKU: 29711603](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-5-tooth-width-25mm-height-25mm-length-500mm-sku-29711603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 2.5 tooth width 25mm height 25mm length 250mm SKU: 29711601](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-5-tooth-width-25mm-height-25mm-length-250mm-sku-29711601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2 tooth width 16mm height 16mm length 1500mm SKU: 29660700](https://maedler.in/product/gear-rack-made-of-pom-module-2-tooth-width-16mm-height-16mm-length-1500mm-sku-29660700/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2 tooth width 16mm height 16mm length 1000mm SKU: 29660500](https://maedler.in/product/gear-rack-made-of-pom-module-2-tooth-width-16mm-height-16mm-length-1000mm-sku-29660500/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2 tooth width 16mm height 16mm length 500mm SKU: 29660300](https://maedler.in/product/gear-rack-made-of-pom-module-2-tooth-width-16mm-height-16mm-length-500mm-sku-29660300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 2 tooth width 20mm height 20mm length 1000mm SKU: 29611705](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-tooth-width-20mm-height-20mm-length-1000mm-sku-29611705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 2 tooth width 20mm height 20mm length 500mm SKU: 29611703](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-tooth-width-20mm-height-20mm-length-500mm-sku-29611703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 2 tooth width 20mm height 20mm length 250mm SKU: 29611701](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-tooth-width-20mm-height-20mm-length-250mm-sku-29611701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 2 tooth width 20mm height 20mm length 1000mm SKU: 29611605](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-tooth-width-20mm-height-20mm-length-1000mm-sku-29611605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 2 tooth width 20mm height 20mm length 500mm SKU: 29611603](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-tooth-width-20mm-height-20mm-length-500mm-sku-29611603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 2 tooth width 20mm height 20mm length 250mm SKU: 29611601](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-tooth-width-20mm-height-20mm-length-250mm-sku-29611601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.5 tooth width 15mm height 15mm length 1000mm SKU: 29560500](https://maedler.in/product/gear-rack-made-of-pom-module-1-5-tooth-width-15mm-height-15mm-length-1000mm-sku-29560500/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.5 tooth width 15mm height 15mm length 500mm SKU: 29560300](https://maedler.in/product/gear-rack-made-of-pom-module-1-5-tooth-width-15mm-height-15mm-length-500mm-sku-29560300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.5 tooth width 15mm height 15mm length 250mm SKU: 29560100](https://maedler.in/product/gear-rack-made-of-pom-module-1-5-tooth-width-15mm-height-15mm-length-250mm-sku-29560100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 1.5 tooth width 17mm height 17mm length 1000mm SKU: 29511705](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-5-tooth-width-17mm-height-17mm-length-1000mm-sku-29511705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 1.5 tooth width 17mm height 17mm length 500mm SKU: 29511703](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-5-tooth-width-17mm-height-17mm-length-500mm-sku-29511703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 1.5 tooth width 17mm height 17mm length 250mm SKU: 29511701](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-5-tooth-width-17mm-height-17mm-length-250mm-sku-29511701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 1.5 tooth width 17mm height 17mm length 1000mm SKU: 29511605](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-5-tooth-width-17mm-height-17mm-length-1000mm-sku-29511605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 1.5 tooth width 17mm height 17mm length 500mm SKU: 29511603](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-5-tooth-width-17mm-height-17mm-length-500mm-sku-29511603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 1.5 tooth width 17mm height 17mm length 250mm SKU: 29511601](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-5-tooth-width-17mm-height-17mm-length-250mm-sku-29511601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.25 tooth width 10mm height 10mm length 500mm SKU: 29460300](https://maedler.in/product/gear-rack-made-of-pom-module-1-25-tooth-width-10mm-height-10mm-length-500mm-sku-29460300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.25 tooth width 10mm height 10mm length 250mm SKU: 29460100](https://maedler.in/product/gear-rack-made-of-pom-module-1-25-tooth-width-10mm-height-10mm-length-250mm-sku-29460100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1 tooth width 10mm height 10mm length 500mm SKU: 29360300](https://maedler.in/product/gear-rack-made-of-pom-module-1-tooth-width-10mm-height-10mm-length-500mm-sku-29360300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1 tooth width 10mm height 10mm length 250mm SKU: 29360100](https://maedler.in/product/gear-rack-made-of-pom-module-1-tooth-width-10mm-height-10mm-length-250mm-sku-29360100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 1 tooth width 15mm height 15mm length 1000mm SKU: 29311705](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-tooth-width-15mm-height-15mm-length-1000mm-sku-29311705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 1 tooth width 15mm height 15mm length 500mm SKU: 29311703](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-tooth-width-15mm-height-15mm-length-500mm-sku-29311703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 1 tooth width 15mm height 15mm length 250mm SKU: 29311701](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-tooth-width-15mm-height-15mm-length-250mm-sku-29311701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 1 tooth width 15mm height 15mm length 1000mm SKU: 29311605](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-tooth-width-15mm-height-15mm-length-1000mm-sku-29311605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 1 tooth width 15mm height 15mm length 500mm SKU: 29311603](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-tooth-width-15mm-height-15mm-length-500mm-sku-29311603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 1 tooth width 15mm height 15mm length 250mm SKU: 29311601](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-tooth-width-15mm-height-15mm-length-250mm-sku-29311601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 0.7 tooth width 5mm height 7mm length 250mm SKU: 29260100](https://maedler.in/product/gear-rack-made-of-pom-module-0-7-tooth-width-5mm-height-7mm-length-250mm-sku-29260100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 0.5 tooth width 4mm +/-0,2mm height 6mm length 250mm SKU: 29160100](https://maedler.in/product/gear-rack-made-of-pom-module-0-5-tooth-width-4mm-02mm-height-6mm-length-250mm-sku-29160100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Bevel gear made of stainless steel 1.4305 module 2 15 teeth i=2:1 SKU: 36199056](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-15-teeth-i21-sku-36199056/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 16 teeth i=1:1 SKU: 36199007](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-16-teeth-i11-sku-36199007/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 60 teeth i=4:1 SKU: 36099793](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-60-teeth-i41-sku-36099793/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 15 teeth i=4:1 SKU: 36099792](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-15-teeth-i41-sku-36099792/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 48 teeth i=3:1 SKU: 36099781](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-48-teeth-i31-sku-36099781/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 16 teeth i=3:1 SKU: 36099780](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-16-teeth-i31-sku-36099780/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 30 teeth i=2:1 SKU: 36099757](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-30-teeth-i21-sku-36099757/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 15 teeth i=2:1 SKU: 36099756](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-15-teeth-i21-sku-36099756/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 16 teeth i=1:1 SKU: 36099707](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-16-teeth-i11-sku-36099707/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 60 teeth i=4:1 SKU: 36099593](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-60-teeth-i41-sku-36099593/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 15 teeth i=4:1 SKU: 36099592](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-15-teeth-i41-sku-36099592/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 45 teeth i=3:1 SKU: 36099577](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-45-teeth-i31-sku-36099577/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 15 teeth i=3:1 SKU: 36099576](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-15-teeth-i31-sku-36099576/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 30 teeth i=2:1 SKU: 36099557](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-30-teeth-i21-sku-36099557/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 15 teeth i=2:1 SKU: 36099556](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-15-teeth-i21-sku-36099556/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 16 teeth i=1:1 SKU: 36099507](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-16-teeth-i11-sku-36099507/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 3.5 16 teeth i=1:1 bore 16mm SKU: 35950700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-3-5-16-teeth-i11-bore-16mm-sku-35950700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 3.0 16 teeth bore 14mm SKU: 35940700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-3-0-16-teeth-bore-14mm-sku-35940700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 2.5 16 teeth i=1:1 bore 12mm SKU: 35910700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-2-5-16-teeth-i11-bore-12mm-sku-35910700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 2.0 16 teeth bore 10mm SKU: 35900700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-2-0-16-teeth-bore-10mm-sku-35900700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 1.5 16 teeth i=1:1 bore 8mm SKU: 35870700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-1-5-16-teeth-i11-bore-8mm-sku-35870700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 1.0 16 teeth bore 6mm SKU: 35850700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-1-0-16-teeth-bore-6mm-sku-35850700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 3.5 16 teeth i=1:1 bore 18mm SKU: 35650701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-3-5-16-teeth-i11-bore-18mm-sku-35650701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 3.5 16 teeth i=1:1 bore 18mm SKU: 35650700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-3-5-16-teeth-i11-bore-18mm-sku-35650700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 3 30 teeth i=2:1 bore 18mm SKU: 35645701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-3-30-teeth-i21-bore-18mm-sku-35645701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 3 30 teeth i=2:1 bore 18mm SKU: 35645700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-3-30-teeth-i21-bore-18mm-sku-35645700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 3 15 teeth i=2:1 bore 14mm SKU: 35645601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-3-15-teeth-i21-bore-14mm-sku-35645601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 3 15 teeth i=2:1 bore 14mm SKU: 35645600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-3-15-teeth-i21-bore-14mm-sku-35645600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 3 16 teeth i=1:1 bore 14mm SKU: 35640701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-3-16-teeth-i11-bore-14mm-sku-35640701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 3 16 teeth i=1:1 bore 14mm SKU: 35640700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-3-16-teeth-i11-bore-14mm-sku-35640700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 30 teeth i=3:1 bore 18mm SKU: 35617501](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-30-teeth-i31-bore-18mm-sku-35617501/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 30 teeth i=3:1 bore 18mm SKU: 35617500](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-30-teeth-i31-bore-18mm-sku-35617500/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 10 teeth i=3:1 bore 8mm SKU: 35617401](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-10-teeth-i31-bore-8mm-sku-35617401/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 10 teeth i=3:1 bore 8mm SKU: 35617400](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-10-teeth-i31-bore-8mm-sku-35617400/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 30 teeth i=2:1 bore 16mm SKU: 35615701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-30-teeth-i21-bore-16mm-sku-35615701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 30 teeth i=2:1 bore 16mm SKU: 35615700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-30-teeth-i21-bore-16mm-sku-35615700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 15 teeth i=2:1 bore 12mm SKU: 35615601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-15-teeth-i21-bore-12mm-sku-35615601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 15 teeth i=2:1 bore 12mm SKU: 35615600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-15-teeth-i21-bore-12mm-sku-35615600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 16 teeth i=1:1 bore 12mm SKU: 35610701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-16-teeth-i11-bore-12mm-sku-35610701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 16 teeth i=1:1 bore 12mm SKU: 35610700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-16-teeth-i11-bore-12mm-sku-35610700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 40 teeth i=4:1 bore 18mm SKU: 35608901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-40-teeth-i41-bore-18mm-sku-35608901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 40 teeth i=4:1 bore 18mm SKU: 35608900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-40-teeth-i41-bore-18mm-sku-35608900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 10 teeth i=4:1 bore 6mm SKU: 35608801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-10-teeth-i41-bore-6mm-sku-35608801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 10 teeth i=4:1 bore 6mm SKU: 35608800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-10-teeth-i41-bore-6mm-sku-35608800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 30 teeth i=3:1 bore 12mm SKU: 35607501](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-30-teeth-i31-bore-12mm-sku-35607501/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 30 teeth i=3:1 bore 12mm SKU: 35607500](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-30-teeth-i31-bore-12mm-sku-35607500/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 10 teeth i=3:1 bore 6mm SKU: 35607401](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-10-teeth-i31-bore-6mm-sku-35607401/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 10 teeth i=3:1 bore 6mm SKU: 35607400](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-10-teeth-i31-bore-6mm-sku-35607400/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 30 teeth i=2:1 bore 12mm SKU: 35605701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-30-teeth-i21-bore-12mm-sku-35605701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 30 teeth i=2:1 bore 12mm SKU: 35605700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-30-teeth-i21-bore-12mm-sku-35605700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 15 teeth i=2:1 bore 10mm SKU: 35605601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-15-teeth-i21-bore-10mm-sku-35605601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 15 teeth i=2:1 bore 10mm SKU: 35605600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-15-teeth-i21-bore-10mm-sku-35605600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 16 teeth i=1:1 bore 10mm SKU: 35600701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-16-teeth-i11-bore-10mm-sku-35600701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 16 teeth i=1:1 bore 10mm SKU: 35600700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-16-teeth-i11-bore-10mm-sku-35600700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 40 teeth i=4:1 bore 12mm SKU: 35578901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-40-teeth-i41-bore-12mm-sku-35578901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 40 teeth i=4:1 bore 12mm SKU: 35578900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-40-teeth-i41-bore-12mm-sku-35578900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 10 teeth i=4:1 bore 5mm SKU: 35578801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-10-teeth-i41-bore-5mm-sku-35578801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 10 teeth i=4:1 bore 5mm SKU: 35578800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-10-teeth-i41-bore-5mm-sku-35578800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 45 teeth i=3:1 bore 12mm SKU: 35577701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-45-teeth-i31-bore-12mm-sku-35577701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 45 teeth i=3:1 bore 12mm SKU: 35577700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-45-teeth-i31-bore-12mm-sku-35577700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 15 teeth i=3:1 bore 8mm SKU: 35577601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-15-teeth-i31-bore-8mm-sku-35577601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=3:1 bore 8mm SKU: 35577600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-15-teeth-i31-bore-8mm-sku-35577600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 30 teeth i=2:1 bore 10mm SKU: 35575701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-30-teeth-i21-bore-10mm-sku-35575701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 30 teeth i=2:1 bore 10mm SKU: 35575700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-30-teeth-i21-bore-10mm-sku-35575700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 15 teeth i=2:1 bore 8mm SKU: 35575601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-15-teeth-i21-bore-8mm-sku-35575601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=2:1 bore 8mm SKU: 35575600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-15-teeth-i21-bore-8mm-sku-35575600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 24 teeth i=1,5:1 bore 8mm SKU: 35574901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-24-teeth-i151-bore-8mm-sku-35574901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 24 teeth i=1,5:1 bore 10mm SKU: 35574900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-24-teeth-i151-bore-10mm-sku-35574900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 16 teeth i=1,5:1 bore 8mm SKU: 35574801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-16-teeth-i151-bore-8mm-sku-35574801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 16 teeth i=1,5:1 bore 8mm SKU: 35574800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-16-teeth-i151-bore-8mm-sku-35574800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 16 teeth i=1:1 bore 8mm SKU: 35570701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-16-teeth-i11-bore-8mm-sku-35570701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 16 teeth i=1:1 bore 8mm SKU: 35570700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-16-teeth-i11-bore-8mm-sku-35570700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 60 teeth i=5:1 bore 10mm SKU: 35559901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-60-teeth-i51-bore-10mm-sku-35559901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 60 teeth i=5:1 bore 10mm SKU: 35559900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-60-teeth-i51-bore-10mm-sku-35559900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 12 teeth i=5:1 bore 4mm SKU: 35559801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-12-teeth-i51-bore-4mm-sku-35559801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 12 teeth i=5:1 bore 4mm SKU: 35559800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-12-teeth-i51-bore-4mm-sku-35559800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 40 teeth i=4:1 bore 10mm SKU: 35558901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-40-teeth-i41-bore-10mm-sku-35558901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 40 teeth i=4:1 bore 10mm SKU: 35558900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-40-teeth-i41-bore-10mm-sku-35558900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 10 teeth i=4:1 bore 4mm SKU: 35558801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-10-teeth-i41-bore-4mm-sku-35558801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 10 teeth i=4:1 bore 4mm SKU: 35558800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-10-teeth-i41-bore-4mm-sku-35558800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 45 teeth i=3:1 bore 10mm SKU: 35557701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-45-teeth-i31-bore-10mm-sku-35557701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 45 teeth i=3:1 bore 10mm SKU: 35557700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-45-teeth-i31-bore-10mm-sku-35557700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 15 teeth i=3:1 bore 5mm SKU: 35557601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-15-teeth-i31-bore-5mm-sku-35557601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 15 teeth i=3:1 bore 5mm SKU: 35557600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-15-teeth-i31-bore-5mm-sku-35557600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 30 teeth i=2:1 bore 8mm SKU: 35555701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-30-teeth-i21-bore-8mm-sku-35555701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=2:1 bore 8mm SKU: 35555700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-30-teeth-i21-bore-8mm-sku-35555700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 15 teeth i=2:1 bore 5mm SKU: 35555601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-15-teeth-i21-bore-5mm-sku-35555601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 15 teeth i=2:1 bore 5mm SKU: 35555600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-15-teeth-i21-bore-5mm-sku-35555600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 30 teeth i=1:1 bore 6mm SKU: 35552001](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-30-teeth-i11-bore-6mm-sku-35552001/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=1:1 bore 6mm SKU: 35552000](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-30-teeth-i11-bore-6mm-sku-35552000/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 16 teeth i=1:1 bore 5mm SKU: 35550701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-16-teeth-i11-bore-5mm-sku-35550701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 16 teeth i=1:1 bore 5mm SKU: 35550700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-16-teeth-i11-bore-5mm-sku-35550700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 0.5 16 teeth i=1:1 bore 3mm SKU: 35520701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-0-5-16-teeth-i11-bore-3mm-sku-35520701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 0.5 16 teeth i=1:1 bore 3mm SKU: 35520700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-0-5-16-teeth-i11-bore-3mm-sku-35520700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 60 teeth i=4:1 milled SKU: 35059300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-60-teeth-i41-milled-sku-35059300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 15 teeth i=4:1 milled SKU: 35059200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-15-teeth-i41-milled-sku-35059200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 45 teeth i=3:1 milled SKU: 35057700](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-45-teeth-i31-milled-sku-35057700/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 15 teeth i=3:1 milled SKU: 35057600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-15-teeth-i31-milled-sku-35057600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 40 teeth i=2:1 milled SKU: 35056100](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-40-teeth-i21-milled-sku-35056100/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 20 teeth i=2:1 milled SKU: 35056000](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-20-teeth-i21-milled-sku-35056000/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Worm gear unit KES 30 version B center distance 30mm ratio 1:5 output hollow shaft 14mm SKU: 42003005B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-15-output-hollow-shaft-14mm-sku-42003005b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 1:5 output hollow shaft 14mm SKU: 42003005](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-15-output-hollow-shaft-14mm-sku-42003005/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit G/II version A centre distance 31mm i=30:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42003000](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i301-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42003000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=24:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42002400](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i241-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42002400/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit KES 20 version B center distance 20mm ratio 65:1 output hollow shaft 12mm SKU: 42002065B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-651-output-hollow-shaft-12mm-sku-42002065b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 65:1 output hollow shaft 12mm SKU: 42002065](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-651-output-hollow-shaft-12mm-sku-42002065/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 40:1 output hollow shaft 12mm SKU: 42002040B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-401-output-hollow-shaft-12mm-sku-42002040b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 40:1 output hollow shaft 12mm SKU: 42002040](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-401-output-hollow-shaft-12mm-sku-42002040/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 30:1 output hollow shaft 12mm SKU: 42002030B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-301-output-hollow-shaft-12mm-sku-42002030b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 30:1 output hollow shaft 12mm SKU: 42002030](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-301-output-hollow-shaft-12mm-sku-42002030/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 23:1 output hollow shaft 12mm SKU: 42002023B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-231-output-hollow-shaft-12mm-sku-42002023b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 23:1 output hollow shaft 12mm SKU: 42002023](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-231-output-hollow-shaft-12mm-sku-42002023/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 18:1 output hollow shaft 12mm SKU: 42002018B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-181-output-hollow-shaft-12mm-sku-42002018b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 18:1 output hollow shaft 12mm SKU: 42002018](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-181-output-hollow-shaft-12mm-sku-42002018/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 15:1 output hollow shaft 12mm SKU: 42002015B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-151-output-hollow-shaft-12mm-sku-42002015b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 15:1 output hollow shaft 12mm SKU: 42002015](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-151-output-hollow-shaft-12mm-sku-42002015/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 13:1 output hollow shaft 12mm SKU: 42002013B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-131-output-hollow-shaft-12mm-sku-42002013b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 13:1 output hollow shaft 12mm SKU: 42002013](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-131-output-hollow-shaft-12mm-sku-42002013/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit G/II version A centre distance 31mm i=20:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42002000](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42002000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=18:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42001800](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i181-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42001800/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit KES 15 version B center distance 15mm ratio 47:1 output hollow shaft 8mm SKU: 42001547B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-471-output-hollow-shaft-8mm-sku-42001547b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 47:1 output hollow shaft 8mm SKU: 42001547](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-471-output-hollow-shaft-8mm-sku-42001547/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version B center distance 15mm ratio 40:1 output hollow shaft 8mm SKU: 42001540B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-401-output-hollow-shaft-8mm-sku-42001540b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 40:1 output hollow shaft 8mm SKU: 42001540](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-401-output-hollow-shaft-8mm-sku-42001540/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version B center distance 15mm ratio 30:1 output hollow shaft 8mm SKU: 42001530B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-301-output-hollow-shaft-8mm-sku-42001530b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 30:1 output hollow shaft 8mm SKU: 42001530](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-301-output-hollow-shaft-8mm-sku-42001530/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version B center distance 15mm ratio 18:1 output hollow shaft 8mm SKU: 42001518B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-181-output-hollow-shaft-8mm-sku-42001518b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 18:1 output hollow shaft 8mm SKU: 42001518](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-181-output-hollow-shaft-8mm-sku-42001518/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version B center distance 15mm ratio 12:1 output hollow shaft 8mm SKU: 42001512B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-121-output-hollow-shaft-8mm-sku-42001512b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 12:1 output hollow shaft 8mm SKU: 42001512](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-121-output-hollow-shaft-8mm-sku-42001512/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit G/II version A centre distance 31mm i=15:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42001500](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42001500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=12:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42001200](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i121-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42001200/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=10:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42001000](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i101-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42001000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=7:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42000700](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i71-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42000700/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42000500](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42000500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 30R SKU: 41035935](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-30r-sku-41035935/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 30R SKU: 41035930](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-30r-sku-41035930/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 30R SKU: 41035925](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-30r-sku-41035925/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 30R SKU: 41035920](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-30r-sku-41035920/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 30R SKU: 41035915](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-30r-sku-41035915/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 30R SKU: 41035910](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-30r-sku-41035910/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 30L SKU: 41035835](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-30l-sku-41035835/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 30L SKU: 41035830](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-30l-sku-41035830/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 30L SKU: 41035825](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-30l-sku-41035825/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 30L SKU: 41035820](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-30l-sku-41035820/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 30L SKU: 41035815](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-30l-sku-41035815/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 30L SKU: 41035810](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-30l-sku-41035810/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 20 SKU: 41035735](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-20-sku-41035735/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 20 SKU: 41035730](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-20-sku-41035730/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 20 SKU: 41035725](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-20-sku-41035725/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 20 SKU: 41035720](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-20-sku-41035720/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 20 SKU: 41035715](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-20-sku-41035715/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 20 SKU: 41035710](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-20-sku-41035710/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 10 SKU: 41035635](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-10-sku-41035635/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 10 SKU: 41035630](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-10-sku-41035630/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 10 SKU: 41035625](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-10-sku-41035625/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 10 SKU: 41035620](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-10-sku-41035620/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 10 SKU: 41035615](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-10-sku-41035615/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 10 SKU: 41035610](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-10-sku-41035610/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 10 SKU: 41035535](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-10-sku-41035535/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 10 SKU: 41035530](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-10-sku-41035530/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 10 SKU: 41035525](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-10-sku-41035525/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 10 SKU: 41035520](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-10-sku-41035520/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 10 SKU: 41035515](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-10-sku-41035515/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 10 SKU: 41035510](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-10-sku-41035510/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Bevel gearbox KEK size 7 ratio 1:1 shaft diameter 12mm housing length 60mm SKU: 41000107](https://maedler.in/product/bevel-gearbox-kek-size-7-ratio-11-shaft-diameter-12mm-housing-length-60mm-sku-41000107/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 6 ratio 1:1 shaft diameter 12mm housing length 56mm SKU: 41000106](https://maedler.in/product/bevel-gearbox-kek-size-6-ratio-11-shaft-diameter-12mm-housing-length-56mm-sku-41000106/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 5 ratio 1:1 shaft diameter 12mm housing length 53mm SKU: 41000105](https://maedler.in/product/bevel-gearbox-kek-size-5-ratio-11-shaft-diameter-12mm-housing-length-53mm-sku-41000105/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 4 ratio 1:1 shaft diameter 12mm housing length 46mm SKU: 41000104](https://maedler.in/product/bevel-gearbox-kek-size-4-ratio-11-shaft-diameter-12mm-housing-length-46mm-sku-41000104/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 3 ratio 1:1 shaft diameter 10mm housing length 42mm SKU: 41000103](https://maedler.in/product/bevel-gearbox-kek-size-3-ratio-11-shaft-diameter-10mm-housing-length-42mm-sku-41000103/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 2 ratio 1:1 shaft diameter 8mm housing length 35mm SKU: 41000102](https://maedler.in/product/bevel-gearbox-kek-size-2-ratio-11-shaft-diameter-8mm-housing-length-35mm-sku-41000102/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 1 ratio 1:1 shaft diameter 6mm housing length 32mm SKU: 41000101](https://maedler.in/product/bevel-gearbox-kek-size-1-ratio-11-shaft-diameter-6mm-housing-length-32mm-sku-41000101/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox type HUG, type B, i=1:1 SKU: 41000100](https://maedler.in/product/bevel-gearbox-type-hug-type-b-i11-sku-41000100/): General: Miniaturised right-angle drives for light duty. Suitable for manual and short term drive applications. Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion and high rigidity. Two counter-bored clearance holes for conventional chassis mounting and a tapped insert below each shaft for vertical mounting. Gearing: Straight cut gears, max. backlash 2°. Ratio i = 1 : 1. Shaft diamter 4mm. Maximum speed 1000 rpm. Gearbox and bearing lubricated for life. Product No. 410 000 00, Version A: Hardened steel gears bonded to ground and hardened steel shafts. Sintered bronze bearing system. Electrical insulation between shafts and housing. Max. torque 0.68 Nm. Weight: 0.041 kg. Product No. 410 001 00, Version B: Polyacetal gears moulded onto ground and hardened steel shafts. Sintered bronze bearing system. Electrical insulation between input/output shaft and between shafts and housing. Max. torque 0.11 Nm. Weight: 0.037 kg. - [Bevel gearbox type HUG, type A, i=1:1 SKU: 41000000](https://maedler.in/product/bevel-gearbox-type-hug-type-a-i11-sku-41000000/): General: Miniaturised right-angle drives for light duty. Suitable for manual and short term drive applications. Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion and high rigidity. Two counter-bored clearance holes for conventional chassis mounting and a tapped insert below each shaft for vertical mounting. Gearing: Straight cut gears, max. backlash 2°. Ratio i = 1 : 1. Shaft diamter 4mm. Maximum speed 1000 rpm. Gearbox and bearing lubricated for life. Product No. 410 000 00, Version A: Hardened steel gears bonded to ground and hardened steel shafts. Sintered bronze bearing system. Electrical insulation between shafts and housing. Max. torque 0.68 Nm. Weight: 0.041 kg. Product No. 410 001 00, Version B: Polyacetal gears moulded onto ground and hardened steel shafts. Sintered bronze bearing system. Electrical insulation between input/output shaft and between shafts and housing. Max. torque 0.11 Nm. Weight: 0.037 kg. - [Bevel gear made of stainless steel 1.4305 module 4 60 teeth i=4:1 SKU: 36199893](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-60-teeth-i41-sku-36199893/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 15 teeth i=4:1 SKU: 36199892](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-15-teeth-i41-sku-36199892/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 48 teeth i=3:1 SKU: 36199881](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-48-teeth-i31-sku-36199881/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 16 teeth i=3:1 SKU: 36199880](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-16-teeth-i31-sku-36199880/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 30 teeth i=2:1 SKU: 36199857](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-30-teeth-i21-sku-36199857/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 15 teeth i=2:1 SKU: 36199856](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-15-teeth-i21-sku-36199856/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 16 teeth i=1:1 SKU: 36199807](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-16-teeth-i11-sku-36199807/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 60 teeth i=4:1 SKU: 36199493](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-60-teeth-i41-sku-36199493/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 15 teeth i=4:1 SKU: 36199492](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-15-teeth-i41-sku-36199492/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 48 teeth i=3:1 SKU: 36199481](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-48-teeth-i31-sku-36199481/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 16 teeth i=3:1 SKU: 36199480](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-16-teeth-i31-sku-36199480/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 30 teeth i=2:1 SKU: 36199457](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-30-teeth-i21-sku-36199457/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 15 teeth i=2:1 SKU: 36199456](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-15-teeth-i21-sku-36199456/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 16 teeth i=1:1 SKU: 36199407](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-16-teeth-i11-sku-36199407/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 60 teeth i=4:1 SKU: 36199193](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-60-teeth-i41-sku-36199193/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 15 teeth i=4:1 SKU: 36199192](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-15-teeth-i41-sku-36199192/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 48 teeth i=3:1 SKU: 36199181](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-48-teeth-i31-sku-36199181/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 16 teeth i=3:1 SKU: 36199180](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-16-teeth-i31-sku-36199180/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 30 teeth i=2:1 SKU: 36199157](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-30-teeth-i21-sku-36199157/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 15 teeth i=2:1 SKU: 36199156](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-15-teeth-i21-sku-36199156/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 16 teeth i=1:1 SKU: 36199107](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-16-teeth-i11-sku-36199107/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 60 teeth i=4:1 SKU: 36199093](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-60-teeth-i41-sku-36199093/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 15 teeth i=4:1 SKU: 36199092](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-15-teeth-i41-sku-36199092/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 48 teeth i=3:1 SKU: 36199081](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-48-teeth-i31-sku-36199081/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 16 teeth i=3:1 SKU: 36199080](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-16-teeth-i31-sku-36199080/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 30 teeth i=2:1 SKU: 36199057](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-30-teeth-i21-sku-36199057/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109514](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-180mm-thread-m12-sku-42109514/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109513](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-180mm-thread-m12-sku-42109513/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109512](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-130mm-thread-m10-sku-42109512/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109511](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-130mm-thread-m10-sku-42109511/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 130mm Thread M10 SKU: 42109510](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-130mm-thread-m10-sku-42109510/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 110mm Thread M8 SKU: 42109509](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-110mm-thread-m8-sku-42109509/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 110mm Thread M8 SKU: 42109508](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-110mm-thread-m8-sku-42109508/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 95mm Thread M8 SKU: 42109507](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-95mm-thread-m8-sku-42109507/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 95mm Thread M8 SKU: 42109506](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-95mm-thread-m8-sku-42109506/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 80mm Thread M6 SKU: 42109505](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-80mm-thread-m6-sku-42109505/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 80mm Thread M6 SKU: 42109504](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-80mm-thread-m6-sku-42109504/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 60mm Thread M6 SKU: 42109503](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-60mm-thread-m6-sku-42109503/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 14x 30mm Centre-Ø 60mm Thread M5 SKU: 42109502](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14x-30mm-centre-o-60mm-thread-m5-sku-42109502/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 11x 23mm Centre-Ø 60mm Thread M5 SKU: 42109501](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-11x-23mm-centre-o-60mm-thread-m5-sku-42109501/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 130mm Thread M10 SKU: 42109410](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-130mm-thread-m10-sku-42109410/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 110mm Thread M8 SKU: 42109409](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-110mm-thread-m8-sku-42109409/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 110mm Thread M8 SKU: 42109408](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-110mm-thread-m8-sku-42109408/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 95mm Thread M8 SKU: 42109407](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-95mm-thread-m8-sku-42109407/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 80mm Thread M6 SKU: 42109406](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-80mm-thread-m6-sku-42109406/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 80mm Thread M6 SKU: 42109405](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-80mm-thread-m6-sku-42109405/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 60mm Thread M6 SKU: 42109404](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-60mm-thread-m6-sku-42109404/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 60mm Thread M5 SKU: 42109403](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-60mm-thread-m5-sku-42109403/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 11x 23mm Centre-Ø 60mm Thread M5 SKU: 42109402](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-11x-23mm-centre-o-60mm-thread-m5-sku-42109402/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 9 x 20mm Centre-Ø 40mm Thread M5 SKU: 42109401](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-9-x-20mm-centre-o-40mm-thread-m5-sku-42109401/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Servo worm gear unit ZM/S size 80 i=39:1 output shaft with shrink disk side 6 SKU: 42108117](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i391-output-shaft-with-shrink-disk-side-6-sku-42108117/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=39:1 output shaft with shrink disk side 5 SKU: 42108116](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i391-output-shaft-with-shrink-disk-side-5-sku-42108116/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=27:1 output shaft with shrink disk side 6 SKU: 42108113](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i271-output-shaft-with-shrink-disk-side-6-sku-42108113/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=27:1 output shaft with shrink disk side 5 SKU: 42108112](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i271-output-shaft-with-shrink-disk-side-5-sku-42108112/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=16:1 output shaft with shrink disk side 6 SKU: 42108109](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i161-output-shaft-with-shrink-disk-side-6-sku-42108109/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=16:1 output shaft with shrink disk side 5 SKU: 42108108](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i161-output-shaft-with-shrink-disk-side-5-sku-42108108/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=10:1 output shaft with shrink disk side 6 SKU: 42108105](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i101-output-shaft-with-shrink-disk-side-6-sku-42108105/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=10:1 output shaft with shrink disk side 5 SKU: 42108104](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i101-output-shaft-with-shrink-disk-side-5-sku-42108104/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=6,4:1 output shaft with shrink disk side 6 SKU: 42108103](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i641-output-shaft-with-shrink-disk-side-6-sku-42108103/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=6,4:1 output shaft with shrink disk side 5 SKU: 42108102](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i641-output-shaft-with-shrink-disk-side-5-sku-42108102/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=4:1 output shaft with shrink disk side 6 SKU: 42108101](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i41-output-shaft-with-shrink-disk-side-6-sku-42108101/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=4:1 output shaft with shrink disk side 5 SKU: 42108100](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i41-output-shaft-with-shrink-disk-side-5-sku-42108100/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=39:1 output shaft with shrink disk side 6 SKU: 42106117](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i391-output-shaft-with-shrink-disk-side-6-sku-42106117/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=39:1 output shaft with shrink disk side 5 SKU: 42106116](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i391-output-shaft-with-shrink-disk-side-5-sku-42106116/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=27:1 output shaft with shrink disk side 6 SKU: 42106113](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i271-output-shaft-with-shrink-disk-side-6-sku-42106113/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=27:1 output shaft with shrink disk side 5 SKU: 42106112](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i271-output-shaft-with-shrink-disk-side-5-sku-42106112/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=16:1 output shaft with shrink disk side 6 SKU: 42106109](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i161-output-shaft-with-shrink-disk-side-6-sku-42106109/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=16:1 output shaft with shrink disk side 5 SKU: 42106108](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i161-output-shaft-with-shrink-disk-side-5-sku-42106108/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=10:1 output shaft with shrink disk side 6 SKU: 42106105](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i101-output-shaft-with-shrink-disk-side-6-sku-42106105/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=10:1 output shaft with shrink disk side 5 SKU: 42106104](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i101-output-shaft-with-shrink-disk-side-5-sku-42106104/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=6,4:1 output shaft with shrink disk side 6 SKU: 42106103](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i641-output-shaft-with-shrink-disk-side-6-sku-42106103/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=6,4:1 output shaft with shrink disk side 5 SKU: 42106102](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i641-output-shaft-with-shrink-disk-side-5-sku-42106102/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=4:1 output shaft with shrink disk side 6 SKU: 42106101](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i41-output-shaft-with-shrink-disk-side-6-sku-42106101/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=4:1 output shaft with shrink disk side 5 SKU: 42106100](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i41-output-shaft-with-shrink-disk-side-5-sku-42106100/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=39:1 output shaft with shrink disk side 6 SKU: 42105117](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i391-output-shaft-with-shrink-disk-side-6-sku-42105117/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=39:1 output shaft with shrink disk side 5 SKU: 42105116](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i391-output-shaft-with-shrink-disk-side-5-sku-42105116/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=27:1 output shaft with shrink disk side 6 SKU: 42105113](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i271-output-shaft-with-shrink-disk-side-6-sku-42105113/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=27:1 output shaft with shrink disk side 5 SKU: 42105112](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i271-output-shaft-with-shrink-disk-side-5-sku-42105112/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=16:1 output shaft with shrink disk side 6 SKU: 42105109](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i161-output-shaft-with-shrink-disk-side-6-sku-42105109/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=16:1 output shaft with shrink disk side 5 SKU: 42105108](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i161-output-shaft-with-shrink-disk-side-5-sku-42105108/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=10:1 output shaft with shrink disk side 6 SKU: 42105105](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i101-output-shaft-with-shrink-disk-side-6-sku-42105105/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=10:1 output shaft with shrink disk side 5 SKU: 42105104](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i101-output-shaft-with-shrink-disk-side-5-sku-42105104/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=6,4:1 output shaft with shrink disk side 6 SKU: 42105103](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i641-output-shaft-with-shrink-disk-side-6-sku-42105103/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=6,4:1 output shaft with shrink disk side 5 SKU: 42105102](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i641-output-shaft-with-shrink-disk-side-5-sku-42105102/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=4:1 output shaft with shrink disk side 6 SKU: 42105101](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i41-output-shaft-with-shrink-disk-side-6-sku-42105101/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=4:1 output shaft with shrink disk side 5 SKU: 42105100](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i41-output-shaft-with-shrink-disk-side-5-sku-42105100/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=39:1 output shaft with shrink disk side 6 SKU: 42104117](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i391-output-shaft-with-shrink-disk-side-6-sku-42104117/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=39:1 output shaft with shrink disk side 5 SKU: 42104116](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i391-output-shaft-with-shrink-disk-side-5-sku-42104116/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=27:1 output shaft with shrink disk side 6 SKU: 42104113](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i271-output-shaft-with-shrink-disk-side-6-sku-42104113/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=27:1 output shaft with shrink disk side 5 SKU: 42104112](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i271-output-shaft-with-shrink-disk-side-5-sku-42104112/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=16:1 output shaft with shrink disk side 6 SKU: 42104109](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i161-output-shaft-with-shrink-disk-side-6-sku-42104109/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=16:1 output shaft with shrink disk side 5 SKU: 42104108](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i161-output-shaft-with-shrink-disk-side-5-sku-42104108/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=10:1 output shaft with shrink disk side 6 SKU: 42104105](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i101-output-shaft-with-shrink-disk-side-6-sku-42104105/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=10:1 output shaft with shrink disk side 5 SKU: 42104104](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i101-output-shaft-with-shrink-disk-side-5-sku-42104104/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=6,4:1 output shaft with shrink disk side 6 SKU: 42104103](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i641-output-shaft-with-shrink-disk-side-6-sku-42104103/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=6,4:1 output shaft with shrink disk side 5 SKU: 42104102](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i641-output-shaft-with-shrink-disk-side-5-sku-42104102/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=4:1 output shaft with shrink disk side 6 SKU: 42104101](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i41-output-shaft-with-shrink-disk-side-6-sku-42104101/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=4:1 output shaft with shrink disk side 5 SKU: 42104100](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i41-output-shaft-with-shrink-disk-side-5-sku-42104100/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Worm gear unit G/II version B centre distance 33mm i=75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42017500](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42017500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=56:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42015600](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i561-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42015600/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=38:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42013800](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i381-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42013800/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=32:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42013200](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i321-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42013200/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=30:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42013000](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i301-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42013000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=24:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42012400](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i241-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42012400/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=20:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42012000](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42012000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=17:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42011700](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i171-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42011700/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=15:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42011500](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42011500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=11.33 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42011100](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i11-33-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42011100/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=7:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42010700](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i71-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42010700/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version A centre distance 31mm i=75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42007500](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42007500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=50:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42005000](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i501-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42005000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=38:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42003800](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i381-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42003800/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit KES 30 version B center distance 30mm ratio 64:1 output hollow shaft 14mm SKU: 42003064B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-641-output-hollow-shaft-14mm-sku-42003064b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 64:1 output hollow shaft 14mm SKU: 42003064](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-641-output-hollow-shaft-14mm-sku-42003064/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 45:1 output hollow shaft 14mm SKU: 42003045B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-451-output-hollow-shaft-14mm-sku-42003045b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 45:1 output hollow shaft 14mm SKU: 42003045](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-451-output-hollow-shaft-14mm-sku-42003045/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 34:1 output hollow shaft 14mm SKU: 42003034B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-341-output-hollow-shaft-14mm-sku-42003034b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 34:1 output hollow shaft 14mm SKU: 42003034](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-341-output-hollow-shaft-14mm-sku-42003034/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 25:1 output hollow shaft 14mm SKU: 42003025B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-251-output-hollow-shaft-14mm-sku-42003025b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 25:1 output hollow shaft 14mm SKU: 42003025](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-251-output-hollow-shaft-14mm-sku-42003025/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 20:1 output hollow shaft 14mm SKU: 42003020B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-201-output-hollow-shaft-14mm-sku-42003020b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 20:1 output hollow shaft 14mm SKU: 42003020](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-201-output-hollow-shaft-14mm-sku-42003020/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 17:1 output hollow shaft 14mm SKU: 42003017B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-171-output-hollow-shaft-14mm-sku-42003017b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 17:1 output hollow shaft 14mm SKU: 42003017](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-171-output-hollow-shaft-14mm-sku-42003017/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 10:1 output hollow shaft 14mm SKU: 42003010B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-101-output-hollow-shaft-14mm-sku-42003010b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 10:1 output hollow shaft 14mm SKU: 42003010](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-101-output-hollow-shaft-14mm-sku-42003010/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Sprocket KRS with hub pitch 6mm 21 teeth material steel SKU: 10062100](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-21-teeth-material-steel-sku-10062100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 20 teeth material steel SKU: 10062000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-20-teeth-material-steel-sku-10062000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 19 teeth material steel SKU: 10061900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-19-teeth-material-steel-sku-10061900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 18 teeth material steel SKU: 10061800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-18-teeth-material-steel-sku-10061800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 17 teeth material steel SKU: 10061700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-17-teeth-material-steel-sku-10061700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 16 teeth material steel SKU: 10061600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-16-teeth-material-steel-sku-10061600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 15 teeth material steel SKU: 10061500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-15-teeth-material-steel-sku-10061500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 14 teeth material steel SKU: 10061400](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-14-teeth-material-steel-sku-10061400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 13 teeth material steel SKU: 10061300](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-13-teeth-material-steel-sku-10061300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 12 teeth material steel SKU: 10061200](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-12-teeth-material-steel-sku-10061200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 11 teeth material steel SKU: 10061100](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-11-teeth-material-steel-sku-10061100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 10 teeth material steel SKU: 10061000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-10-teeth-material-steel-sku-10061000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 9 teeth material steel SKU: 10060900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-9-teeth-material-steel-sku-10060900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 8 teeth material steel SKU: 10060800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-8-teeth-material-steel-sku-10060800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 25 teeth material polyacetal resin SKU: 10057500](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-25-teeth-material-polyacetal-resin-sku-10057500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 23 teeth material polyacetal resin SKU: 10057300](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-23-teeth-material-polyacetal-resin-sku-10057300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 21 teeth material polyacetal resin SKU: 10057100](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-21-teeth-material-polyacetal-resin-sku-10057100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 19 teeth material polyacetal resin SKU: 10056900](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-19-teeth-material-polyacetal-resin-sku-10056900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 17 teeth material polyacetal resin SKU: 10056700](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-17-teeth-material-polyacetal-resin-sku-10056700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 15 teeth material polyacetal resin SKU: 10056500](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-15-teeth-material-polyacetal-resin-sku-10056500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 13 teeth material polyacetal resin SKU: 10056300](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-13-teeth-material-polyacetal-resin-sku-10056300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 25 teeth material polyacetal resin SKU: 10052500](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-25-teeth-material-polyacetal-resin-sku-10052500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 23 teeth material polyacetal resin SKU: 10052300](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-23-teeth-material-polyacetal-resin-sku-10052300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 21 teeth material polyacetal resin SKU: 10052100](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-21-teeth-material-polyacetal-resin-sku-10052100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 19 teeth material polyacetal resin SKU: 10051900](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-19-teeth-material-polyacetal-resin-sku-10051900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 17 teeth material polyacetal resin SKU: 10051700](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-17-teeth-material-polyacetal-resin-sku-10051700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 15 teeth material polyacetal resin SKU: 10051500](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-15-teeth-material-polyacetal-resin-sku-10051500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 13 teeth material polyacetal resin SKU: 10051300](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-13-teeth-material-polyacetal-resin-sku-10051300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 57 teeth material steel SKU: 10035700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-57-teeth-material-steel-sku-10035700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 45 teeth material steel SKU: 10034500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-45-teeth-material-steel-sku-10034500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 40 teeth material steel SKU: 10034000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-40-teeth-material-steel-sku-10034000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 39 teeth material steel SKU: 10033900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-39-teeth-material-steel-sku-10033900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 38 teeth material steel SKU: 10033800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-38-teeth-material-steel-sku-10033800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 37 teeth material steel SKU: 10033700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-37-teeth-material-steel-sku-10033700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 36 teeth material steel SKU: 10033600](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-36-teeth-material-steel-sku-10033600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 35 teeth material steel SKU: 10033500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-35-teeth-material-steel-sku-10033500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 34 teeth material steel SKU: 10033400](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-34-teeth-material-steel-sku-10033400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 33 teeth material steel SKU: 10033300](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-33-teeth-material-steel-sku-10033300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 32 teeth material steel SKU: 10033200](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-32-teeth-material-steel-sku-10033200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 31 teeth material steel SKU: 10033100](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-31-teeth-material-steel-sku-10033100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 30 teeth material steel SKU: 10033000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-30-teeth-material-steel-sku-10033000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 29 teeth material steel SKU: 10032900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-29-teeth-material-steel-sku-10032900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 28 teeth material steel SKU: 10032800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-28-teeth-material-steel-sku-10032800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 27 teeth material steel SKU: 10032700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-27-teeth-material-steel-sku-10032700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 26 teeth material steel SKU: 10032600](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-26-teeth-material-steel-sku-10032600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 25 teeth material steel SKU: 10032500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-25-teeth-material-steel-sku-10032500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 24 teeth material steel SKU: 10032400](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-24-teeth-material-steel-sku-10032400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 23 teeth material steel SKU: 10032300](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-23-teeth-material-steel-sku-10032300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 22 teeth material steel SKU: 10032200](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-22-teeth-material-steel-sku-10032200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 21 teeth material steel SKU: 10032100](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-21-teeth-material-steel-sku-10032100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 20 teeth material steel SKU: 10032000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-20-teeth-material-steel-sku-10032000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 19 teeth material steel SKU: 10031900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-19-teeth-material-steel-sku-10031900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 18 teeth material steel SKU: 10031800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-18-teeth-material-steel-sku-10031800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 17 teeth material steel SKU: 10031700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-17-teeth-material-steel-sku-10031700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 16 teeth material steel SKU: 10031600](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-16-teeth-material-steel-sku-10031600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 15 teeth material steel SKU: 10031500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-15-teeth-material-steel-sku-10031500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 14 teeth material steel SKU: 10031400](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-14-teeth-material-steel-sku-10031400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 13 teeth material steel SKU: 10031300](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-13-teeth-material-steel-sku-10031300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 12 teeth material steel SKU: 10031200](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-12-teeth-material-steel-sku-10031200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 11 teeth material steel SKU: 10031100](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-11-teeth-material-steel-sku-10031100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 10 teeth material steel SKU: 10031000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-10-teeth-material-steel-sku-10031000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 09 teeth material steel SKU: 10030900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-09-teeth-material-steel-sku-10030900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 8 teeth material steel SKU: 10030800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-8-teeth-material-steel-sku-10030800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 95 teeth material steel SKU: 10008300](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-95-teeth-material-steel-sku-10008300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 76 teeth material steel SKU: 10007600](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-76-teeth-material-steel-sku-10007600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 57 teeth material steel SKU: 10005700](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-57-teeth-material-steel-sku-10005700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 45 teeth material steel SKU: 10004500](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-45-teeth-material-steel-sku-10004500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 38 teeth material steel SKU: 10003800](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-38-teeth-material-steel-sku-10003800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 30 teeth material steel SKU: 10003000](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-30-teeth-material-steel-sku-10003000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 25 teeth material steel SKU: 10002500](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-25-teeth-material-steel-sku-10002500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 24 teeth material steel SKU: 10002400](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-24-teeth-material-steel-sku-10002400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 23 teeth material steel SKU: 10002300](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-23-teeth-material-steel-sku-10002300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 21 teeth material steel SKU: 10002100](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-21-teeth-material-steel-sku-10002100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 19 teeth material steel SKU: 10001900](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-19-teeth-material-steel-sku-10001900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 17 teeth material steel SKU: 10001700](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-17-teeth-material-steel-sku-10001700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 15 teeth material steel SKU: 10001500](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-15-teeth-material-steel-sku-10001500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 14 teeth material steel SKU: 10001400](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-14-teeth-material-steel-sku-10001400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 13 teeth material steel SKU: 10001300](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-13-teeth-material-steel-sku-10001300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 12 teeth material steel SKU: 10001200](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-12-teeth-material-steel-sku-10001200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Standard three phase motor SM/I 230/400V 50Hz 3.0kW ca. 2910 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43003100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3-0kw-ca-2910-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 2910 rpm size 90 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43003000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-2910-rpm-size-90-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 2900 rpm size 90 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-2900-rpm-size-90-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 2890 rpm size 80 model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-2890-rpm-size-80-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 2890 rpm size 80 model B5 efficiency class IE3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-2890-rpm-size-80-model-b5-efficiency-class-ie3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-are/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 2840 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-2840-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 2820 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-2820-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 2840 rpm size 63 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-2840-rpm-size-63-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 2930 rpm size 132 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43001300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-2930-rpm-size-132-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4.0kW ca. 2920 rpm size 112 M-T model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43001200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4-0kw-ca-2920-rpm-size-112-m-t-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-ww/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3.0kW ca. 2910 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43001100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3-0kw-ca-2910-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 2910 rpm size 90 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43001000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-2910-rpm-size-90-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 2900 rpm size 90 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-2900-rpm-size-90-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 2890 rpm size 80 model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-2890-rpm-size-80-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 2890 rpm size 80 model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-2890-rpm-size-80-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 2840 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-2840-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 2820 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-2820-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 2840 rpm size 63 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-2840-rpm-size-63-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Worm gear unit H/I size 75 i=65:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207565](https://maedler.in/product/worm-gear-unit-h-i-size-75-i651-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207565/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 75 i=50:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207550](https://maedler.in/product/worm-gear-unit-h-i-size-75-i501-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207550/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 75 i=30:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207530](https://maedler.in/product/worm-gear-unit-h-i-size-75-i301-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207530/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 75 i=20:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207520](https://maedler.in/product/worm-gear-unit-h-i-size-75-i201-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207520/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [worm gear unit H/I size 75 i=15:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207515](https://maedler.in/product/worm-gear-unit-h-i-size-75-i151-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207515/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [worm gear unit H/I size 75 i=100:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207511](https://maedler.in/product/worm-gear-unit-h-i-size-75-i1001-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207511/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 75 i=7.5:1 output shaft as hollow shaft Ø28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207507](https://maedler.in/product/worm-gear-unit-h-i-size-75-i7-51-output-shaft-as-hollow-shaft-o28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207507/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft both-sided for worm gear unit H/I size 75 diameter 28mm overall length 244mm SKU: 42207502](https://maedler.in/product/output-shaft-both-sided-for-worm-gear-unit-h-i-size-75-diameter-28mm-overall-length-244mm-sku-42207502/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 75 diameter 28mm overall length 183mm SKU: 42207501](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-75-diameter-28mm-overall-length-183mm-sku-42207501/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Worm gear unit H/I size 63 i=80:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206380](https://maedler.in/product/worm-gear-unit-h-i-size-63-i801-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206380/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=65:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206365](https://maedler.in/product/worm-gear-unit-h-i-size-63-i651-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206365/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=50:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206350](https://maedler.in/product/worm-gear-unit-h-i-size-63-i501-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206350/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=40:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206340](https://maedler.in/product/worm-gear-unit-h-i-size-63-i401-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206340/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=30:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206330](https://maedler.in/product/worm-gear-unit-h-i-size-63-i301-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206330/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=25:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206325](https://maedler.in/product/worm-gear-unit-h-i-size-63-i251-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206325/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=20:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206320](https://maedler.in/product/worm-gear-unit-h-i-size-63-i201-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206320/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=15:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206315](https://maedler.in/product/worm-gear-unit-h-i-size-63-i151-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206315/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=100:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206311](https://maedler.in/product/worm-gear-unit-h-i-size-63-i1001-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206311/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=10:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206310](https://maedler.in/product/worm-gear-unit-h-i-size-63-i101-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206310/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=7.5:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206307](https://maedler.in/product/worm-gear-unit-h-i-size-63-i7-51-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206307/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft double-sided for Worm gear unit H/I size 63 diameter 25mm overall length 216mm SKU: 42206302](https://maedler.in/product/output-shaft-double-sided-for-worm-gear-unit-h-i-size-63-diameter-25mm-overall-length-216mm-sku-42206302/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 63 diameter 25mm overall length 165mm SKU: 42206301](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-63-diameter-25mm-overall-length-165mm-sku-42206301/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Worm gear unit H/I size 50 i=80:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205080](https://maedler.in/product/worm-gear-unit-h-i-size-50-i801-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205080/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=65:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205065](https://maedler.in/product/worm-gear-unit-h-i-size-50-i651-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205065/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=50:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205050](https://maedler.in/product/worm-gear-unit-h-i-size-50-i501-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205050/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=40:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205040](https://maedler.in/product/worm-gear-unit-h-i-size-50-i401-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205040/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=30:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205030](https://maedler.in/product/worm-gear-unit-h-i-size-50-i301-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205030/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=25:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205025](https://maedler.in/product/worm-gear-unit-h-i-size-50-i251-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205025/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=20:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205020](https://maedler.in/product/worm-gear-unit-h-i-size-50-i201-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205020/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=15:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205015](https://maedler.in/product/worm-gear-unit-h-i-size-50-i151-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205015/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=100:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205011](https://maedler.in/product/worm-gear-unit-h-i-size-50-i1001-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205011/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=10:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205010](https://maedler.in/product/worm-gear-unit-h-i-size-50-i101-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205010/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=7.5:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205007](https://maedler.in/product/worm-gear-unit-h-i-size-50-i7-51-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205007/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft double-sided for Worm gear unit H/I size 50 diameter 25mm overall length 196 7mm SKU: 42205002](https://maedler.in/product/output-shaft-double-sided-for-worm-gear-unit-h-i-size-50-diameter-25mm-overall-length-196-7mm-sku-42205002/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 50 diameter 25mm overall length 143,5mm SKU: 42205001](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-50-diameter-25mm-overall-length-1435mm-sku-42205001/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Worm gear unit H/I size 40 i=80:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204080](https://maedler.in/product/worm-gear-unit-h-i-size-40-i801-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204080/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=65:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204065](https://maedler.in/product/worm-gear-unit-h-i-size-40-i651-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204065/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=50:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204050](https://maedler.in/product/worm-gear-unit-h-i-size-40-i501-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204050/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=40:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204040](https://maedler.in/product/worm-gear-unit-h-i-size-40-i401-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204040/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=30:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204030](https://maedler.in/product/worm-gear-unit-h-i-size-40-i301-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204030/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=25:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204025](https://maedler.in/product/worm-gear-unit-h-i-size-40-i251-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204025/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=20:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204020](https://maedler.in/product/worm-gear-unit-h-i-size-40-i201-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204020/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=15:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204015](https://maedler.in/product/worm-gear-unit-h-i-size-40-i151-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204015/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=100:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204011](https://maedler.in/product/worm-gear-unit-h-i-size-40-i1001-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204011/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=10:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204010](https://maedler.in/product/worm-gear-unit-h-i-size-40-i101-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204010/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=7.5:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204007](https://maedler.in/product/worm-gear-unit-h-i-size-40-i7-51-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204007/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft double-sided for Worm gear unit H/I size 40 diameter 18mm overall length 161mm SKU: 42204002](https://maedler.in/product/output-shaft-double-sided-for-worm-gear-unit-h-i-size-40-diameter-18mm-overall-length-161mm-sku-42204002/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 40 diameter 18mm overall length 120mm SKU: 42204001](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-40-diameter-18mm-overall-length-120mm-sku-42204001/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Worm gear unit H/I size 31 i=80:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203180](https://maedler.in/product/worm-gear-unit-h-i-size-31-i801-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203180/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=65:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203165](https://maedler.in/product/worm-gear-unit-h-i-size-31-i651-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203165/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=50:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203150](https://maedler.in/product/worm-gear-unit-h-i-size-31-i501-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203150/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=40:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203140](https://maedler.in/product/worm-gear-unit-h-i-size-31-i401-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203140/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=30:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203130](https://maedler.in/product/worm-gear-unit-h-i-size-31-i301-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203130/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=25:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203125](https://maedler.in/product/worm-gear-unit-h-i-size-31-i251-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203125/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=20:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203120](https://maedler.in/product/worm-gear-unit-h-i-size-31-i201-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203120/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=15:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203115](https://maedler.in/product/worm-gear-unit-h-i-size-31-i151-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203115/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=100:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203111](https://maedler.in/product/worm-gear-unit-h-i-size-31-i1001-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203111/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=10:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203110](https://maedler.in/product/worm-gear-unit-h-i-size-31-i101-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203110/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=7.5:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203107](https://maedler.in/product/worm-gear-unit-h-i-size-31-i7-51-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203107/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft double-sided for Worm gear unit H/I size 31 diameter 14mm overall length 126mm SKU: 42203102](https://maedler.in/product/output-shaft-double-sided-for-worm-gear-unit-h-i-size-31-diameter-14mm-overall-length-126mm-sku-42203102/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 31 diameter 14mm overall length 95mm SKU: 42203101](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-31-diameter-14mm-overall-length-95mm-sku-42203101/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 38 x 80mm Centre-Ø 180mm Thread M12 SKU: 42109812](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-38-x-80mm-centre-o-180mm-thread-m12-sku-42109812/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109811](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-180mm-thread-m12-sku-42109811/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109810](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-180mm-thread-m12-sku-42109810/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 180mm Thread M12 SKU: 42109809](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-180mm-thread-m12-sku-42109809/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109808](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-130mm-thread-m10-sku-42109808/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109807](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-130mm-thread-m10-sku-42109807/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 130mm Thread M10 SKU: 42109806](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-130mm-thread-m10-sku-42109806/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 110mm Thread M8 SKU: 42109805](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-110mm-thread-m8-sku-42109805/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 110mm Thread M8 SKU: 42109804](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-110mm-thread-m8-sku-42109804/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 95mm Thread M8 SKU: 42109803](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-95mm-thread-m8-sku-42109803/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 95mm Thread M8 SKU: 42109802](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-95mm-thread-m8-sku-42109802/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 80mm Thread M6 SKU: 42109801](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-80mm-thread-m6-sku-42109801/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 38 x 80mm Centre-Ø 180mm Thread M12 SKU: 42109609](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-38-x-80mm-centre-o-180mm-thread-m12-sku-42109609/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109608](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-180mm-thread-m12-sku-42109608/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109607](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-180mm-thread-m12-sku-42109607/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109606](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-130mm-thread-m10-sku-42109606/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109605](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-130mm-thread-m10-sku-42109605/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 130mm Thread M10 SKU: 42109604](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-130mm-thread-m10-sku-42109604/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 110mm Thread M8 SKU: 42109603](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-110mm-thread-m8-sku-42109603/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 95mm Thread M8 SKU: 42109602](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-95mm-thread-m8-sku-42109602/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 80mm Thread M6 SKU: 42109601](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-80mm-thread-m6-sku-42109601/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Sprocket KRS with hub pitch 8mm 60 teeth material steel SKU: 10086000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-60-teeth-material-steel-sku-10086000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 57 teeth material steel SKU: 10085700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-57-teeth-material-steel-sku-10085700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 50 teeth material steel SKU: 10085000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-50-teeth-material-steel-sku-10085000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 48 teeth material steel SKU: 10084800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-48-teeth-material-steel-sku-10084800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 45 teeth material steel SKU: 10084500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-45-teeth-material-steel-sku-10084500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 40 teeth material steel SKU: 10084000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-40-teeth-material-steel-sku-10084000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 39 teeth material steel SKU: 10083900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-39-teeth-material-steel-sku-10083900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 38 teeth material steel SKU: 10083800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-38-teeth-material-steel-sku-10083800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 37 teeth material steel SKU: 10083700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-37-teeth-material-steel-sku-10083700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 36 teeth material steel SKU: 10083600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-36-teeth-material-steel-sku-10083600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 35 teeth material steel SKU: 10083500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-35-teeth-material-steel-sku-10083500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 34 teeth material steel SKU: 10083400](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-34-teeth-material-steel-sku-10083400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 33 teeth material steel SKU: 10083300](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-33-teeth-material-steel-sku-10083300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 32 teeth material steel SKU: 10083200](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-32-teeth-material-steel-sku-10083200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 31 teeth material steel SKU: 10083100](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-31-teeth-material-steel-sku-10083100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 30 teeth material steel SKU: 10083000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-30-teeth-material-steel-sku-10083000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 29 teeth material steel SKU: 10082900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-29-teeth-material-steel-sku-10082900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 28 teeth material steel SKU: 10082800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-28-teeth-material-steel-sku-10082800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 27 teeth material steel SKU: 10082700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-27-teeth-material-steel-sku-10082700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 26 teeth material steel SKU: 10082600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-26-teeth-material-steel-sku-10082600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 25 teeth material steel SKU: 10082500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-25-teeth-material-steel-sku-10082500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 24 teeth material steel SKU: 10082400](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-24-teeth-material-steel-sku-10082400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 23 teeth material steel SKU: 10082300](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-23-teeth-material-steel-sku-10082300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 22 teeth material steel SKU: 10082200](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-22-teeth-material-steel-sku-10082200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 21 teeth material steel SKU: 10082100](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-21-teeth-material-steel-sku-10082100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 20 teeth material steel SKU: 10082000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-20-teeth-material-steel-sku-10082000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 19 teeth material steel SKU: 10081900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-19-teeth-material-steel-sku-10081900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 18 teeth material steel SKU: 10081800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-18-teeth-material-steel-sku-10081800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 17 teeth material steel SKU: 10081700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-17-teeth-material-steel-sku-10081700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 16 teeth material steel SKU: 10081600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-16-teeth-material-steel-sku-10081600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 15 teeth material steel SKU: 10081500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-15-teeth-material-steel-sku-10081500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 14 teeth material steel SKU: 10081400](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-14-teeth-material-steel-sku-10081400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 13 teeth material steel SKU: 10081300](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-13-teeth-material-steel-sku-10081300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 12 teeth material steel SKU: 10081200](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-12-teeth-material-steel-sku-10081200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 11 teeth material steel SKU: 10081100](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-11-teeth-material-steel-sku-10081100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 10 teeth material steel SKU: 10081000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-10-teeth-material-steel-sku-10081000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 9 teeth material steel SKU: 10080900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-9-teeth-material-steel-sku-10080900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 8 teeth material steel SKU: 10080800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-8-teeth-material-steel-sku-10080800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 114 teeth material steel SKU: 10078800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-114-teeth-material-steel-sku-10078800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 95 teeth material steel SKU: 10078300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-95-teeth-material-steel-sku-10078300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 80 teeth material steel SKU: 10078000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-80-teeth-material-steel-sku-10078000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 76 teeth material steel SKU: 10077600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-76-teeth-material-steel-sku-10077600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 70 teeth material steel SKU: 10077000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-70-teeth-material-steel-sku-10077000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 60 teeth material steel SKU: 10076000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-60-teeth-material-steel-sku-10076000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 57 teeth material steel SKU: 10075700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-57-teeth-material-steel-sku-10075700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 54 teeth material steel SKU: 10075400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-54-teeth-material-steel-sku-10075400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 50 teeth material steel SKU: 10075000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-50-teeth-material-steel-sku-10075000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 48 teeth material steel SKU: 10074800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-48-teeth-material-steel-sku-10074800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 45 teeth material steel SKU: 10074500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-45-teeth-material-steel-sku-10074500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 42 teeth material steel SKU: 10074200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-42-teeth-material-steel-sku-10074200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 40 teeth material steel SKU: 10074000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-40-teeth-material-steel-sku-10074000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 38 teeth material steel SKU: 10073800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-38-teeth-material-steel-sku-10073800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 36 teeth material steel SKU: 10073600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-36-teeth-material-steel-sku-10073600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 35 teeth material steel SKU: 10073500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-35-teeth-material-steel-sku-10073500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 32 teeth material steel SKU: 10073200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-32-teeth-material-steel-sku-10073200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 30 teeth material steel SKU: 10073000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-30-teeth-material-steel-sku-10073000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 28 teeth material steel SKU: 10072800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-28-teeth-material-steel-sku-10072800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 27 teeth material steel SKU: 10072700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-27-teeth-material-steel-sku-10072700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 26 teeth material steel SKU: 10072600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-26-teeth-material-steel-sku-10072600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 25 teeth material steel SKU: 10072500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-25-teeth-material-steel-sku-10072500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 24 teeth material steel SKU: 10072400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-24-teeth-material-steel-sku-10072400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 23 teeth material steel SKU: 10072300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-23-teeth-material-steel-sku-10072300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 22 teeth material steel SKU: 10072200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-22-teeth-material-steel-sku-10072200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 21 teeth material steel SKU: 10072100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-21-teeth-material-steel-sku-10072100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 20 teeth material steel SKU: 10072000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-20-teeth-material-steel-sku-10072000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 19 teeth material steel SKU: 10071900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-19-teeth-material-steel-sku-10071900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 18 teeth material steel SKU: 10071800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-18-teeth-material-steel-sku-10071800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 17 teeth material steel SKU: 10071700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-17-teeth-material-steel-sku-10071700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 16 teeth material steel SKU: 10071600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-16-teeth-material-steel-sku-10071600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 15 teeth material steel SKU: 10071500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-15-teeth-material-steel-sku-10071500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 14 teeth material steel SKU: 10071400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-14-teeth-material-steel-sku-10071400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 13 teeth material steel SKU: 10071300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-13-teeth-material-steel-sku-10071300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 12 teeth material steel SKU: 10071200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-12-teeth-material-steel-sku-10071200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 11 teeth material steel SKU: 10071100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-11-teeth-material-steel-sku-10071100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 10 teeth material steel SKU: 10071000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-10-teeth-material-steel-sku-10071000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 9 teeth material steel SKU: 10070900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-9-teeth-material-steel-sku-10070900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 8 teeth material steel SKU: 10070800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-8-teeth-material-steel-sku-10070800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 76 teeth material steel SKU: 10067600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-76-teeth-material-steel-sku-10067600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 57 teeth material steel SKU: 10065700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-57-teeth-material-steel-sku-10065700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 48 teeth material steel SKU: 10064800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-48-teeth-material-steel-sku-10064800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 45 teeth material steel SKU: 10064500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-45-teeth-material-steel-sku-10064500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 40 teeth material steel SKU: 10064000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-40-teeth-material-steel-sku-10064000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 39 teeth material steel SKU: 10063900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-39-teeth-material-steel-sku-10063900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 38 teeth material steel SKU: 10063800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-38-teeth-material-steel-sku-10063800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 37 teeth material steel SKU: 10063700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-37-teeth-material-steel-sku-10063700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 36 teeth material steel SKU: 10063600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-36-teeth-material-steel-sku-10063600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 35 teeth material steel SKU: 10063500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-35-teeth-material-steel-sku-10063500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 34 teeth material steel SKU: 10063400](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-34-teeth-material-steel-sku-10063400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 33 teeth material steel SKU: 10063300](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-33-teeth-material-steel-sku-10063300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 32 teeth material steel SKU: 10063200](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-32-teeth-material-steel-sku-10063200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 31 teeth material steel SKU: 10063100](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-31-teeth-material-steel-sku-10063100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 30 teeth material steel SKU: 10063000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-30-teeth-material-steel-sku-10063000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 29 teeth material steel SKU: 10062900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-29-teeth-material-steel-sku-10062900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 28 teeth material steel SKU: 10062800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-28-teeth-material-steel-sku-10062800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 27 teeth material steel SKU: 10062700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-27-teeth-material-steel-sku-10062700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 26 teeth material steel SKU: 10062600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-26-teeth-material-steel-sku-10062600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 25 teeth material steel SKU: 10062500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-25-teeth-material-steel-sku-10062500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 24 teeth material steel SKU: 10062400](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-24-teeth-material-steel-sku-10062400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 23 teeth material steel SKU: 10062300](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-23-teeth-material-steel-sku-10062300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 22 teeth material steel SKU: 10062200](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-22-teeth-material-steel-sku-10062200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Small geared motor SE with DC motor 12V size 1 n2=522 rpm i=11.5:1 SKU: 43041112](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2522-rpm-i11-51-sku-43041112/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=822 rpm i=7.3:1 SKU: 43041024](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2822-rpm-i7-31-sku-43041024/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=822 rpm i=7.3:1 SKU: 43041012](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2822-rpm-i7-31-sku-43041012/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor SFP 3 with DC-motor 24V i=3,6:1 idle speed 980 1/min. nominal torque 0.3 Nm SKU: 43039824](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i361-idle-speed-980-1-min-nominal-torque-0-3-nm-sku-43039824/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=7,5:1 idle speed 470 1/min. nominal torque 0.6 Nm SKU: 43039724](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i751-idle-speed-470-1-min-nominal-torque-0-6-nm-sku-43039724/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=18:1 idle speed 197 1/min. nominal torque 1.3 Nm SKU: 43039624](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i181-idle-speed-197-1-min-nominal-torque-1-3-nm-sku-43039624/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=28:1 idle speed 127 1/min. nominal torque 2 Nm SKU: 43039524](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i281-idle-speed-127-1-min-nominal-torque-2-nm-sku-43039524/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=56:1 idle speed 63 1/min. nominal torque 4 Nm SKU: 43039424](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i561-idle-speed-63-1-min-nominal-torque-4-nm-sku-43039424/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=121:1 idle speed 29 1/min. nominal torque 6 Nm SKU: 43039324](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i1211-idle-speed-29-1-min-nominal-torque-6-nm-sku-43039324/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=213:1 idle speed 16,5 1/min. nominal torque 6 Nm SKU: 43039224](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i2131-idle-speed-165-1-min-nominal-torque-6-nm-sku-43039224/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=422:1 idle speed 8,5 1/min. nominal torque 5 Nm SKU: 43039124](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i4221-idle-speed-85-1-min-nominal-torque-5-nm-sku-43039124/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=3,6:1 idle speed 1000 1/min. SKU: 43038824](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i361-idle-speed-1000-1-min-sku-43038824/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=7,5:1 idle speed 480 1/min. SKU: 43038724](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i751-idle-speed-480-1-min-sku-43038724/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=18:1 idle speed 200 1/min. SKU: 43038624](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i181-idle-speed-200-1-min-sku-43038624/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=28:1 idle speed 128 1/min. SKU: 43038524](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i281-idle-speed-128-1-min-sku-43038524/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=56:1 idle speed 65 1/min. SKU: 43038424](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i561-idle-speed-65-1-min-sku-43038424/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=121:1 idle speed 30 1/min. SKU: 43038324](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i1211-idle-speed-30-1-min-sku-43038324/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=213:1 idle speed 16 1/min. SKU: 43038224](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i2131-idle-speed-16-1-min-sku-43038224/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=422:1 idle speed 8 1/min. SKU: 43038124](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i4221-idle-speed-8-1-min-sku-43038124/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=3,6:1 idle speed 2280 1/min. SKU: 43037824](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i361-idle-speed-2280-1-min-sku-43037824/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=7,5:1 idle speed 1090 1/min. SKU: 43037724](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i751-idle-speed-1090-1-min-sku-43037724/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=18:1 idle speed 460 1/min. SKU: 43037624](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i181-idle-speed-460-1-min-sku-43037624/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=28:1 idle speed 290 1/min. SKU: 43037524](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i281-idle-speed-290-1-min-sku-43037524/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=56:1 idle speed 140 1/min. SKU: 43037424](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i561-idle-speed-140-1-min-sku-43037424/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=121:1 idle speed 68 1/min. SKU: 43037324](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i1211-idle-speed-68-1-min-sku-43037324/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=213:1 idle speed 38 1/min. SKU: 43037224](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i2131-idle-speed-38-1-min-sku-43037224/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=422:1 idle speed 19 1/min. SKU: 43037124](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i4221-idle-speed-19-1-min-sku-43037124/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 1.13 rpm SKU: 43020513](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-1-13-rpm-sku-43020513/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 0.25 rpm SKU: 43020504](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-0-25-rpm-sku-43020504/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 5 rpm SKU: 43020502](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-5-rpm-sku-43020502/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 7.5 rpm SKU: 43020501](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-7-5-rpm-sku-43020501/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 15 rpm SKU: 43020500](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-15-rpm-sku-43020500/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 1 rpm SKU: 43020010](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-1-rpm-sku-43020010/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 2 rpm SKU: 43020009](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-2-rpm-sku-43020009/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 3.12 rpm SKU: 43020008](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-3-12-rpm-sku-43020008/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 5 rpm SKU: 43020006](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-5-rpm-sku-43020006/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 10 rpm SKU: 43020003](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-10-rpm-sku-43020003/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 15 rpm SKU: 43020002](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-15-rpm-sku-43020002/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 30 rpm SKU: 43020001](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-30-rpm-sku-43020001/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 60 rpm SKU: 43020000](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-60-rpm-sku-43020000/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Standard three phase motor SM/I 230/400V 50Hz 3kW ca. 725 rpm size 132 M model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43017100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3kw-ca-725-rpm-size-132-m-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 725 rpm size 132 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43017000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-725-rpm-size-132-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 715 rpm size 112 M-T model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-715-rpm-size-112-m-t-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 700 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-700-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 710 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-710-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 705 rpm size 90 L model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-705-rpm-size-90-l-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 710 rpm size 90 S model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-710-rpm-size-90-s-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 700 rpm size 80 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-700-rpm-size-80-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3kW ca. 725 rpm size 132 M model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43015100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3kw-ca-725-rpm-size-132-m-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 725 rpm size 132 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43015000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-725-rpm-size-132-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 715 rpm size 112 M-T model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-715-rpm-size-112-m-t-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 700 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-700-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 710 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-710-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 705 rpm size 90 L model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-705-rpm-size-90-l-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 710 rpm size 90 S model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-710-rpm-size-90-s-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 700 rpm size 80 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-700-rpm-size-80-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 975 rpm size 132 M model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43013300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-975-rpm-size-132-m-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4kW ca. 970 rpm size 132 M model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43013200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4kw-ca-970-rpm-size-132-m-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3kW ca. 965 rpm size 132 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43013100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3kw-ca-965-rpm-size-132-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 965 rpm size 112 M-T model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43013000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-965-rpm-size-112-m-t-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 955 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-955-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 950 rpm size 90 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-950-rpm-size-90-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 950 rpm size 90 S model B5 efficiency class IE3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-950-rpm-size-90-s-model-b5-efficiency-class-ie3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-ar/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 935 rpm size 80 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-935-rpm-size-80-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 935 rpm size 80 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-935-rpm-size-80-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 910 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-910-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 975 rpm size 132 M model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43011300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-975-rpm-size-132-m-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4kW ca. 970 rpm size 132 M model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43011200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4kw-ca-970-rpm-size-132-m-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3kW ca. 965 rpm size 132 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43011100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3kw-ca-965-rpm-size-132-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 965 rpm size 112 M-T model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43011000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-965-rpm-size-112-m-t-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 955 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-955-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 950 rpm size 90 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-950-rpm-size-90-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 950 rpm size 90 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-950-rpm-size-90-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 935 rpm size 80 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-935-rpm-size-80-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 935 rpm size 80 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-935-rpm-size-80-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 910 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-910-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 1460 rpm size 132 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43007300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-1460-rpm-size-132-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4.0kW ca. 1450 rpm size 112 M-T model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43007200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4-0kw-ca-1450-rpm-size-112-m-t-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-ww/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3.0kW ca. 1450 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43007100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3-0kw-ca-1450-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 1450 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43007000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-1450-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 1430 rpm size 90 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-1430-rpm-size-90-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 1440 rpm size 90 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-1440-rpm-size-90-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 1440 rpm size 80 model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-1440-rpm-size-80-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 1420 rpm size 80 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-1420-rpm-size-80-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 1400 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-1400-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 1400 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-1400-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.18kW ca. 1350 rpm size 63 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-18kw-ca-1350-rpm-size-63-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 1460 rpm size 132 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43005300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-1460-rpm-size-132-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4.0kW ca. 1450 rpm size 112 M-T model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43005200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4-0kw-ca-1450-rpm-size-112-m-t-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-ww/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3.0kW ca. 1450 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43005100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3-0kw-ca-1450-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 1450 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43005000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-1450-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 1430 rpm size 90 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-1430-rpm-size-90-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 1440 rpm size 90 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-1440-rpm-size-90-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 1440 rpm size 80 model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-1440-rpm-size-80-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 1420 rpm size 80 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-1420-rpm-size-80-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 1400 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-1400-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 1400 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-1400-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.18kW ca. 1350 rpm size 63 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-18kw-ca-1350-rpm-size-63-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 2930 rpm size 132 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43003300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-2930-rpm-size-132-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4.0kW ca. 2920 rpm size 112 M-T model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43003200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4-0kw-ca-2920-rpm-size-112-m-t-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-ww/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 14 teeth material steel SKU: 10121400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-14-teeth-material-steel-sku-10121400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 13 teeth material steel SKU: 10121300](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-13-teeth-material-steel-sku-10121300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 12 teeth material steel SKU: 10121200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-12-teeth-material-steel-sku-10121200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 11 teeth material steel SKU: 10121100](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-11-teeth-material-steel-sku-10121100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 10 teeth material steel SKU: 10121000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-10-teeth-material-steel-sku-10121000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 9 teeth material steel SKU: 10120900](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-9-teeth-material-steel-sku-10120900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 8 teeth material steel SKU: 10120800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-8-teeth-material-steel-sku-10120800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 114 teeth material cast iron SKU: 10118800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-114-teeth-material-cast-iron-sku-10118800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 95 teeth material cast iron SKU: 10118300](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-95-teeth-material-cast-iron-sku-10118300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 76 teeth material cast iron SKU: 10117600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-76-teeth-material-cast-iron-sku-10117600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 57 teeth material cast iron SKU: 10115700](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-57-teeth-material-cast-iron-sku-10115700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 45 teeth material cast iron SKU: 10114500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-45-teeth-material-cast-iron-sku-10114500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 40 teeth material steel SKU: 10114000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-40-teeth-material-steel-sku-10114000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 38 teeth material steel SKU: 10113800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-38-teeth-material-steel-sku-10113800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 36 teeth material steel SKU: 10113600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-36-teeth-material-steel-sku-10113600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 35 teeth material steel SKU: 10113500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-35-teeth-material-steel-sku-10113500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 32 teeth material steel SKU: 10113200](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-32-teeth-material-steel-sku-10113200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 30 teeth material steel SKU: 10113000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-30-teeth-material-steel-sku-10113000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 29 teeth material steel SKU: 10112900](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-29-teeth-material-steel-sku-10112900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 28 teeth material steel SKU: 10112800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-28-teeth-material-steel-sku-10112800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 27 teeth material steel SKU: 10112700](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-27-teeth-material-steel-sku-10112700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 26 teeth material steel SKU: 10112600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-26-teeth-material-steel-sku-10112600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 25 teeth material steel SKU: 10112500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-25-teeth-material-steel-sku-10112500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 24 teeth material steel SKU: 10112400](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-24-teeth-material-steel-sku-10112400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 23 teeth material steel SKU: 10112300](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-23-teeth-material-steel-sku-10112300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 22 teeth material steel SKU: 10112200](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-22-teeth-material-steel-sku-10112200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 21 teeth material steel SKU: 10112100](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-21-teeth-material-steel-sku-10112100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 20 teeth material steel SKU: 10112000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-20-teeth-material-steel-sku-10112000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 19 teeth material steel SKU: 10111900](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-19-teeth-material-steel-sku-10111900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 18 teeth material steel SKU: 10111800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-18-teeth-material-steel-sku-10111800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 17 teeth material steel SKU: 10111700](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-17-teeth-material-steel-sku-10111700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 16 teeth material steel SKU: 10111600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-16-teeth-material-steel-sku-10111600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 15 teeth material steel SKU: 10111500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-15-teeth-material-steel-sku-10111500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 14 teeth material steel SKU: 10111400](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-14-teeth-material-steel-sku-10111400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 13 teeth material steel SKU: 10111300](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-13-teeth-material-steel-sku-10111300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 12 teeth material steel SKU: 10111200](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-12-teeth-material-steel-sku-10111200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 11 teeth material steel SKU: 10111100](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-11-teeth-material-steel-sku-10111100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 10 teeth material steel SKU: 10111000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-10-teeth-material-steel-sku-10111000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 9 teeth material steel SKU: 10110900](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-9-teeth-material-steel-sku-10110900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 8 teeth material steel SKU: 10110800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-8-teeth-material-steel-sku-10110800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 40 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099840](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-40-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099840/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099830](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099830/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099825](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099825/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099823](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099823/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099821](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099821/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099820](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099820/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099819](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099819/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099817](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099817/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099815](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099815/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099813](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099813/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099630](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099630/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099625](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099625/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099623](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099623/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099621](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099621/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099620](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099620/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099619](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099619/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099617](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099617/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099615](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099615/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099613](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099613/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 114 teeth material steel SKU: 10098800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-114-teeth-material-steel-sku-10098800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 83 teeth material steel SKU: 10098300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-83-teeth-material-steel-sku-10098300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 80 teeth material steel SKU: 10098000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-80-teeth-material-steel-sku-10098000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 76 teeth material steel SKU: 10097600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-76-teeth-material-steel-sku-10097600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 70 teeth material steel SKU: 10097000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-70-teeth-material-steel-sku-10097000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 65 teeth material steel SKU: 10096500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-65-teeth-material-steel-sku-10096500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 60 teeth material steel SKU: 10096000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-60-teeth-material-steel-sku-10096000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 57 teeth material steel SKU: 10095700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-57-teeth-material-steel-sku-10095700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 54 teeth material steel SKU: 10095400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-54-teeth-material-steel-sku-10095400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 50 teeth material steel SKU: 10095000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-50-teeth-material-steel-sku-10095000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 48 teeth material steel SKU: 10094800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-48-teeth-material-steel-sku-10094800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 45 teeth material steel SKU: 10094500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-45-teeth-material-steel-sku-10094500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 42 teeth material steel SKU: 10094200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-42-teeth-material-steel-sku-10094200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 40 teeth material steel SKU: 10094000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-40-teeth-material-steel-sku-10094000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 38 teeth material steel SKU: 10093800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-38-teeth-material-steel-sku-10093800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 36 teeth material steel SKU: 10093600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-36-teeth-material-steel-sku-10093600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 35 teeth material steel SKU: 10093500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-35-teeth-material-steel-sku-10093500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 32 teeth material steel SKU: 10093200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-32-teeth-material-steel-sku-10093200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 30 teeth material steel SKU: 10093000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-30-teeth-material-steel-sku-10093000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 28 teeth material steel SKU: 10092800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-28-teeth-material-steel-sku-10092800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 27 teeth material steel SKU: 10092700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-27-teeth-material-steel-sku-10092700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 26 teeth material steel SKU: 10092600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-26-teeth-material-steel-sku-10092600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 25 teeth material steel SKU: 10092500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-25-teeth-material-steel-sku-10092500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 24 teeth material steel SKU: 10092400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-24-teeth-material-steel-sku-10092400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 23 teeth material steel SKU: 10092300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-23-teeth-material-steel-sku-10092300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 22 teeth material steel SKU: 10092200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-22-teeth-material-steel-sku-10092200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 21 teeth material steel SKU: 10092100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-21-teeth-material-steel-sku-10092100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 20 teeth material steel SKU: 10092000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-20-teeth-material-steel-sku-10092000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 19 teeth material steel SKU: 10091900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-19-teeth-material-steel-sku-10091900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 18 teeth material steel SKU: 10091800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-18-teeth-material-steel-sku-10091800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 17 teeth material steel SKU: 10091700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-17-teeth-material-steel-sku-10091700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 16 teeth material steel SKU: 10091600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-16-teeth-material-steel-sku-10091600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 15 teeth material steel SKU: 10091500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-15-teeth-material-steel-sku-10091500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 14 teeth material steel SKU: 10091400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-14-teeth-material-steel-sku-10091400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 13 teeth material steel SKU: 10091300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-13-teeth-material-steel-sku-10091300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 12 teeth material steel SKU: 10091200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-12-teeth-material-steel-sku-10091200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 11 teeth material steel SKU: 10091100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-11-teeth-material-steel-sku-10091100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 10 teeth material steel SKU: 10091000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-10-teeth-material-steel-sku-10091000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 9 teeth material steel SKU: 10090900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-9-teeth-material-steel-sku-10090900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 8 teeth material steel SKU: 10090800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-8-teeth-material-steel-sku-10090800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 76 teeth material steel SKU: 10087600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-76-teeth-material-steel-sku-10087600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=429/min i=7:1 output shaft side 2 SKU: 43049215](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2429-min-i71-output-shaft-side-2-sku-43049215/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=286/min i=10,5:1 output shaft side 2 SKU: 43049214](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2286-min-i1051-output-shaft-side-2-sku-43049214/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=200/min i=15:1 output shaft side 2 SKU: 43049213](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2200-min-i151-output-shaft-side-2-sku-43049213/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=143/min i=21:1 output shaft side 2 SKU: 43049212](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2143-min-i211-output-shaft-side-2-sku-43049212/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=100/min i=30:1 output shaft side 2 SKU: 43049211](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2100-min-i301-output-shaft-side-2-sku-43049211/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=75/min i=40:1 output shaft side 2 SKU: 43049210](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n275-min-i401-output-shaft-side-2-sku-43049210/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=44/min i=68:1 output shaft side 2 SKU: 43049209](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n244-min-i681-output-shaft-side-2-sku-43049209/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=1000/min i=3:1 output shaft side 2 SKU: 43049208](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n21000-min-i31-output-shaft-side-2-sku-43049208/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=429/min i=7:1 output shaft side 2 SKU: 43049207](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2429-min-i71-output-shaft-side-2-sku-43049207/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=286/min i=10,5:1 output shaft side 2 SKU: 43049206](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2286-min-i1051-output-shaft-side-2-sku-43049206/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=200/min i=15:1 output shaft side 2 SKU: 43049205](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2200-min-i151-output-shaft-side-2-sku-43049205/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=143/min i=21:1 output shaft side 2 SKU: 43049204](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2143-min-i211-output-shaft-side-2-sku-43049204/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=100/min i=30:1 output shaft side 2 SKU: 43049203](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2100-min-i301-output-shaft-side-2-sku-43049203/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=75/min i=40:1 output shaft side 2 SKU: 43049202](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n275-min-i401-output-shaft-side-2-sku-43049202/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=44/min i=68:1 output shaft side 2 SKU: 43049201](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n244-min-i681-output-shaft-side-2-sku-43049201/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=1000/min i=3:1 output shaft side 1 SKU: 43049116](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n21000-min-i31-output-shaft-side-1-sku-43049116/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=429/min i=7:1 output shaft side 1 SKU: 43049115](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2429-min-i71-output-shaft-side-1-sku-43049115/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=286/min i=10,5:1 output shaft side 1 SKU: 43049114](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2286-min-i1051-output-shaft-side-1-sku-43049114/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=200/min i=15:1 output shaft side 1 SKU: 43049113](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2200-min-i151-output-shaft-side-1-sku-43049113/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=143/min i=21:1 output shaft side 1 SKU: 43049112](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2143-min-i211-output-shaft-side-1-sku-43049112/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=100/min i=30:1 output shaft side 1 SKU: 43049111](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2100-min-i301-output-shaft-side-1-sku-43049111/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=75/min i=40:1 output shaft side 1 SKU: 43049110](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n275-min-i401-output-shaft-side-1-sku-43049110/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=44/min i=68:1 output shaft side 1 SKU: 43049109](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n244-min-i681-output-shaft-side-1-sku-43049109/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=1000/min i=3:1 output shaft side 1 SKU: 43049108](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n21000-min-i31-output-shaft-side-1-sku-43049108/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=429/min i=7:1 output shaft side 1 SKU: 43049107](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2429-min-i71-output-shaft-side-1-sku-43049107/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=286/min i=10,5:1 output shaft side 1 SKU: 43049106](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2286-min-i1051-output-shaft-side-1-sku-43049106/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=200/min i=15:1 output shaft side 1 SKU: 43049105](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2200-min-i151-output-shaft-side-1-sku-43049105/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=143/min i=21:1 output shaft side 1 SKU: 43049104](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2143-min-i211-output-shaft-side-1-sku-43049104/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=100/min i=30:1 output shaft side 1 SKU: 43049103](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2100-min-i301-output-shaft-side-1-sku-43049103/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=75/min i=40:1 output shaft side 1 SKU: 43049102](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n275-min-i401-output-shaft-side-1-sku-43049102/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=44/min i=68:1 output shaft side 1 SKU: 43049101](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n244-min-i681-output-shaft-side-1-sku-43049101/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 56W n2=429/min i=7:1 with hollow shaft SKU: 43049015](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-56w-n2429-min-i71-with-hollow-shaft-sku-43049015/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 56W n2=200/min i=15:1 with hollow shaft SKU: 43049013](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-56w-n2200-min-i151-with-hollow-shaft-sku-43049013/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 56W n2=100/min i=30:1 with hollow shaft SKU: 43049011](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-56w-n2100-min-i301-with-hollow-shaft-sku-43049011/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 56W n2=44/min i=68:1 with hollow shaft SKU: 43049009](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-56w-n244-min-i681-with-hollow-shaft-sku-43049009/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 28W n2=429/min i=7:1 with hollow shaft SKU: 43049007](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-28w-n2429-min-i71-with-hollow-shaft-sku-43049007/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 28W n2=200/min i=15:1 with hollow shaft SKU: 43049005](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-28w-n2200-min-i151-with-hollow-shaft-sku-43049005/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 28W n2=100/min i=30:1 with hollow shaft SKU: 43049003](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-28w-n2100-min-i301-with-hollow-shaft-sku-43049003/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 28W n2=44/min i=68:1 with hollow shaft SKU: 43049001](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-28w-n244-min-i681-with-hollow-shaft-sku-43049001/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=41:4 idle speed 580 /min SKU: 43048924](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i414-idle-speed-580-min-sku-43048924/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=44:4 idle speed 280 /min SKU: 43048824](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i444-idle-speed-280-min-sku-43048824/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=44:4 idle speed 240 /min SKU: 43048724](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i444-idle-speed-240-min-sku-43048724/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=52:2 idle speed 180 /min SKU: 43048624](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i522-idle-speed-180-min-sku-43048624/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=52:2 idle speed 110 /min SKU: 43048424](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i522-idle-speed-110-min-sku-43048424/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=52:2 idle speed 50 /min SKU: 43048224](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i522-idle-speed-50-min-sku-43048224/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=69:1 idle speed 35 /min SKU: 43048124](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i691-idle-speed-35-min-sku-43048124/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=69:1 idle speed 13 /min SKU: 43048024](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i691-idle-speed-13-min-sku-43048024/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=59:3 idle speed 210 /min SKU: 43047424](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i593-idle-speed-210-min-sku-43047424/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=62:1 idle speed 140 /min SKU: 43047324](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i621-idle-speed-140-min-sku-43047324/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=62:1 idle speed 95 /min SKU: 43047224](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i621-idle-speed-95-min-sku-43047224/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=62:1 idle speed 50 /min SKU: 43047124](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i621-idle-speed-50-min-sku-43047124/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=62:1 idle speed 35 /min SKU: 43047024](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i621-idle-speed-35-min-sku-43047024/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 12V i=62:1 idle speed 25 /min SKU: 43047012](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-12v-i621-idle-speed-25-min-sku-43047012/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature spur gear motor SF with DC-motor 24V i=10:1 idle speed 610 /min SKU: 43046924](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i101-idle-speed-610-min-sku-43046924/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=30:1 idle speed 210 /min SKU: 43046824](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i301-idle-speed-210-min-sku-43046824/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=50:1 idle speed 130 /min SKU: 43046724](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i501-idle-speed-130-min-sku-43046724/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=75:1 idle speed 90 /min SKU: 43046624](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i751-idle-speed-90-min-sku-43046624/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=150:1 idle speed 43 /min SKU: 43046424](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i1501-idle-speed-43-min-sku-43046424/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=250:1 idle speed 27 /min SKU: 43046324](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i2501-idle-speed-27-min-sku-43046324/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=1000:1 idle speed 6 /min SKU: 43046124](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i10001-idle-speed-6-min-sku-43046124/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=3000:1 idle speed 2 /min SKU: 43046024](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i30001-idle-speed-2-min-sku-43046024/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Planetary small geared motor PE with DC motor 24V size 2 n2=51 rpm i=59:1 SKU: 43045824](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n251-rpm-i591-sku-43045824/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=65 rpm i=46:1 SKU: 43045724](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n265-rpm-i461-sku-43045724/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=83 rpm i=36:1 SKU: 43045624](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n283-rpm-i361-sku-43045624/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=100 rpm i=30:1 SKU: 43045524](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2100-rpm-i301-sku-43045524/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=120 rpm i=25:1 SKU: 43045424](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2120-rpm-i251-sku-43045424/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=143 rpm i=21:1 SKU: 43045324](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2143-rpm-i211-sku-43045324/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=392 rpm i=7.66:1 SKU: 43045224](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2392-rpm-i7-661-sku-43045224/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=500 rpm i=6:1 SKU: 43045124](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2500-rpm-i61-sku-43045124/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=600 rpm i=5:1 SKU: 43045024](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2600-rpm-i51-sku-43045024/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=22 rpm i=270:1 SKU: 43044424](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n222-rpm-i2701-sku-43044424/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=29 rpm i=210:1 SKU: 43044324](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n229-rpm-i2101-sku-43044324/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=50 rpm i=120:1 SKU: 43044224](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n250-rpm-i1201-sku-43044224/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=67 rpm i=90:1 SKU: 43044124](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n267-rpm-i901-sku-43044124/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=200 rpm i=30:1 SKU: 43044024](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n2200-rpm-i301-sku-43044024/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=83 rpm i=36:1 SKU: 43043924](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n283-rpm-i361-sku-43043924/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=100 rpm i=30:1 SKU: 43043824](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2100-rpm-i301-sku-43043824/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=133 rpm i=30:1 SKU: 43043724](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2133-rpm-i301-sku-43043724/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=160 rpm i=25:1 SKU: 43043624](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2160-rpm-i251-sku-43043624/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=200 rpm i=20:1 SKU: 43043524](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2200-rpm-i201-sku-43043524/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=276 rpm i=14.5:1 SKU: 43043424](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2276-rpm-i14-51-sku-43043424/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=333 rpm i=12:1 SKU: 43043324](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2333-rpm-i121-sku-43043324/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=429 rpm i=9.33:1 SKU: 43043224](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2429-rpm-i9-331-sku-43043224/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=625 rpm i=4.8:1 SKU: 43043124](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2625-rpm-i4-81-sku-43043124/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=833 rpm i=4.8:1 SKU: 43043024](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2833-rpm-i4-81-sku-43043024/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=79 rpm i=38:1 SKU: 43042524](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n279-rpm-i381-sku-43042524/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=100 rpm i=30:1 SKU: 43042424](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2100-rpm-i301-sku-43042424/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=130 rpm i=23:1 SKU: 43042324](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2130-rpm-i231-sku-43042324/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=200 rpm i=15:1 SKU: 43042224](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2200-rpm-i151-sku-43042224/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=261 rpm i=11.5:1 SKU: 43042124](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2261-rpm-i11-51-sku-43042124/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=411 rpm i=7.3:1 SKU: 43042024](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2411-rpm-i7-31-sku-43042024/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=158 rpm i=38:1 SKU: 43041524](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2158-rpm-i381-sku-43041524/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=158 rpm i=38:1 SKU: 43041512](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2158-rpm-i381-sku-43041512/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=200 rpm i=30:1 SKU: 43041424](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2200-rpm-i301-sku-43041424/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=200 rpm i=30:1 SKU: 43041412](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2200-rpm-i301-sku-43041412/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=261 rpm i=23:1 SKU: 43041324](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2261-rpm-i231-sku-43041324/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=261 rpm i=23:1 SKU: 43041312](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2261-rpm-i231-sku-43041312/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=400 rpm i=15:1 SKU: 43041224](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2400-rpm-i151-sku-43041224/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=400 rpm i=15:1 SKU: 43041212](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2400-rpm-i151-sku-43041212/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=522 rpm i=11.5:1 SKU: 43041124](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2522-rpm-i11-51-sku-43041124/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181416](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181415](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181414](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181414/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181412](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181412/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181318](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181318/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181316](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181316/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181315](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181315/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181314](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181314/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181312](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181312/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181310](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181310/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181216](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181216/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181215](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181215/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181214](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181214/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181212](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181212/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181210](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181210/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181116](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181116/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181115](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181115/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181114](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181114/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181112](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181112/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181110](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181110/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181014](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181014/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181012](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181012/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 11H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181011](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-11h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181011/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181010](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181010/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRTG 06 B-1 3/8x7/32" 30 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178130](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 28 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178128](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 27 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178127](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 26 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178126](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 25 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178125](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 24 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178124](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 23 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178123](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 22 teeth material steel teeth hardened for taper bush type 1108 SKU: 10178122](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-1108-sku-10178122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 21 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178121](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 20 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178120](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 19 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178119](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 18 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178118](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 17 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178117](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 114 teeth material cast iron for taper bush type 1215 SKU: 10177188G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-114-teeth-material-cast-iron-for-taper-bush-type-1215-sku-10177188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material cast iron for taper bush type 1210 SKU: 10177183G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-95-teeth-material-cast-iron-for-taper-bush-type-1210-sku-10177183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material steel for taper bush type 1210 SKU: 10177183](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-95-teeth-material-steel-for-taper-bush-type-1210-sku-10177183/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 76 teeth material cast iron for taper bush type 1210 SKU: 10177176G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-76-teeth-material-cast-iron-for-taper-bush-type-1210-sku-10177176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 57 teeth material cast iron for taper bush type 1210 SKU: 10177157G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-57-teeth-material-cast-iron-for-taper-bush-type-1210-sku-10177157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 57 teeth material steel for taper bush type 1210 SKU: 10177157](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-57-teeth-material-steel-for-taper-bush-type-1210-sku-10177157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 45 teeth material steel for taper bush type 1210 SKU: 10177145](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-45-teeth-material-steel-for-taper-bush-type-1210-sku-10177145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 38 teeth material steel for taper bush type 1210 SKU: 10177138](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-38-teeth-material-steel-for-taper-bush-type-1210-sku-10177138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 30 teeth material steel for taper bush type 1210 SKU: 10177130](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-30-teeth-material-steel-for-taper-bush-type-1210-sku-10177130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 28 teeth material steel for taper bush type 1210 SKU: 10177128](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-28-teeth-material-steel-for-taper-bush-type-1210-sku-10177128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 27 teeth material steel for taper bush type 1210 SKU: 10177127](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-27-teeth-material-steel-for-taper-bush-type-1210-sku-10177127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 26 teeth material steel for taper bush type 1210 SKU: 10177126](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-26-teeth-material-steel-for-taper-bush-type-1210-sku-10177126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 25 teeth material steel for taper bush type 1210 SKU: 10177125](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-25-teeth-material-steel-for-taper-bush-type-1210-sku-10177125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 24 teeth material steel for taper bush type 1210 SKU: 10177124](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-24-teeth-material-steel-for-taper-bush-type-1210-sku-10177124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 23 teeth material steel for taper bush type 1210 SKU: 10177123](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-23-teeth-material-steel-for-taper-bush-type-1210-sku-10177123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 22 teeth material steel for taper bush type 1108 SKU: 10177122](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-22-teeth-material-steel-for-taper-bush-type-1108-sku-10177122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 21 teeth material steel for taper bush type 1008 SKU: 10177121](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-21-teeth-material-steel-for-taper-bush-type-1008-sku-10177121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 20 teeth material steel for taper bush type 1008 SKU: 10177120](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-20-teeth-material-steel-for-taper-bush-type-1008-sku-10177120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 19 teeth material steel for taper bush type 1008 SKU: 10177119](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-19-teeth-material-steel-for-taper-bush-type-1008-sku-10177119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 18 teeth material steel for taper bush type 1008 SKU: 10177118](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-18-teeth-material-steel-for-taper-bush-type-1008-sku-10177118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 17 teeth material steel for taper bush type 1008 SKU: 10177117](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-17-teeth-material-steel-for-taper-bush-type-1008-sku-10177117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 25 teeth material polyacetal resin SKU: 10152500](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-25-teeth-material-polyacetal-resin-sku-10152500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 23 teeth material polyacetal resin SKU: 10152300](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-23-teeth-material-polyacetal-resin-sku-10152300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 21 teeth material polyacetal resin SKU: 10152100](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-21-teeth-material-polyacetal-resin-sku-10152100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 19 teeth material polyacetal resin SKU: 10151900](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-19-teeth-material-polyacetal-resin-sku-10151900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 17 teeth material polyacetal resin SKU: 10151700](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-17-teeth-material-polyacetal-resin-sku-10151700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 15 teeth material polyacetal resin SKU: 10151500](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-15-teeth-material-polyacetal-resin-sku-10151500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 13 teeth material polyacetal resin SKU: 10151300](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-13-teeth-material-polyacetal-resin-sku-10151300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 114 teeth material steel SKU: 10128800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-114-teeth-material-steel-sku-10128800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 95 teeth material steel SKU: 10128300](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-95-teeth-material-steel-sku-10128300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 80 teeth material steel SKU: 10128000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-80-teeth-material-steel-sku-10128000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 76 teeth material steel SKU: 10127600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-76-teeth-material-steel-sku-10127600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 72 teeth material steel SKU: 10127200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-72-teeth-material-steel-sku-10127200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 70 teeth material steel SKU: 10127000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-70-teeth-material-steel-sku-10127000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 65 teeth material steel SKU: 10126500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-65-teeth-material-steel-sku-10126500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 60 teeth material steel SKU: 10126000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-60-teeth-material-steel-sku-10126000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 57 teeth material steel SKU: 10125700](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-57-teeth-material-steel-sku-10125700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 54 teeth material steel SKU: 10125400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-54-teeth-material-steel-sku-10125400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 50 teeth material steel SKU: 10125000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-50-teeth-material-steel-sku-10125000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 48 teeth material steel SKU: 10124800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-48-teeth-material-steel-sku-10124800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 45 teeth material steel SKU: 10124500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-45-teeth-material-steel-sku-10124500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 44 teeth material steel SKU: 10124400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-44-teeth-material-steel-sku-10124400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 42 teeth material steel SKU: 10124200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-42-teeth-material-steel-sku-10124200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 40 teeth material steel SKU: 10124000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-40-teeth-material-steel-sku-10124000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 38 teeth material steel SKU: 10123800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-38-teeth-material-steel-sku-10123800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 36 teeth material steel SKU: 10123600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-36-teeth-material-steel-sku-10123600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 35 teeth material steel SKU: 10123500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-35-teeth-material-steel-sku-10123500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 32 teeth material steel SKU: 10123200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-32-teeth-material-steel-sku-10123200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 30 teeth material steel SKU: 10123000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-30-teeth-material-steel-sku-10123000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 28 teeth material steel SKU: 10122800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-28-teeth-material-steel-sku-10122800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 27 teeth material steel SKU: 10122700](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-27-teeth-material-steel-sku-10122700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 26 teeth material steel SKU: 10122600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-26-teeth-material-steel-sku-10122600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 25 teeth material steel SKU: 10122500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-25-teeth-material-steel-sku-10122500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 24 teeth material steel SKU: 10122400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-24-teeth-material-steel-sku-10122400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 23 teeth material steel SKU: 10122300](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-23-teeth-material-steel-sku-10122300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 22 teeth material steel SKU: 10122200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-22-teeth-material-steel-sku-10122200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 21 teeth material steel SKU: 10122100](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-21-teeth-material-steel-sku-10122100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 20 teeth material steel SKU: 10122000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-20-teeth-material-steel-sku-10122000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 19 teeth material steel SKU: 10121900](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-19-teeth-material-steel-sku-10121900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 18 teeth material steel SKU: 10121800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-18-teeth-material-steel-sku-10121800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 17 teeth material steel SKU: 10121700](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-17-teeth-material-steel-sku-10121700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 16 teeth material steel SKU: 10121600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-16-teeth-material-steel-sku-10121600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 15 teeth material steel SKU: 10121500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-15-teeth-material-steel-sku-10121500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =142 rpm Md2 =35 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205590](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-142-rpm-md2-35-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =123 rpm Md2 =41 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205585](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-123-rpm-md2-41-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =107 rpm Md2 =47 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205580](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-107-rpm-md2-47-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =91 rpm Md2 =55 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205575](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-91-rpm-md2-55-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432055/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =86 rpm Md2 =58 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205570](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-86-rpm-md2-58-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432055/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =74 rpm Md2 =68 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205565](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-74-rpm-md2-68-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432055/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =63 rpm Md2=80 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205560](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-63-rpm-md280-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320556/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =47.6 rpm Md2=106 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205555](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-47-6-rpm-md2106-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =39 rpm Md2=129 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205550](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-39-rpm-md2129-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432055/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =34.6 rpm Md2=146 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205545](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-34-6-rpm-md2146-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =29.6 rpm Md2=165 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205540](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-29-6-rpm-md2165-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =25.6 rpm Md2=191 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205535](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-25-6-rpm-md2191-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =21.1 rpm Md2=231 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205530](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-21-1-rpm-md2231-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =18.3 rpm Md2=268 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205525](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-18-3-rpm-md2268-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =15.1 rpm Md2=324 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205520](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-15-1-rpm-md2324-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =13.4 rpm Md2=365 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205515](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-13-4-rpm-md2365-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =11.1 rpm Md2=442 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205510](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-11-1-rpm-md2442-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =8.5 rpm Md2=577 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205505](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-8-5-rpm-md2577-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Output flange for helical geared motor HR/I gearbox size 50/2, 50/3 and 60/3 diameter 250mm overall height 19,5mm SKU: 43205025](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-50-2-50-3-and-60-3-diameter-250mm-overall-height-195mm-sku-43205025/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 50/2, 50/3 and 60/3 diameter 200mm overall height 16,5mm SKU: 43205020](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-50-2-50-3-and-60-3-diameter-200mm-overall-height-165mm-sku-43205020/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 50/2, 50/3 and 60/3 diameter 160mm overall height 17,5mm SKU: 43205016](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-50-2-50-3-and-60-3-diameter-160mm-overall-height-175mm-sku-43205016/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 40/2 and 40/3 diameter 200mm overall height 14,5m SKU: 43204020](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-40-2-and-40-3-diameter-200mm-overall-height-145m-sku-43204020/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 40/2 and 40/3 diameter 160mm overall height 13mm SKU: 43204016](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-40-2-and-40-3-diameter-160mm-overall-height-13mm-sku-43204016/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 40/2 and 40/3 diameter 140mm overall height 13mm SKU: 43204014](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-40-2-and-40-3-diameter-140mm-overall-height-13mm-sku-43204014/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 40/2 and 40/3 diameter 120mm overall height 13mm SKU: 43204012](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-40-2-and-40-3-diameter-120mm-overall-height-13mm-sku-43204012/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =181 rpm Md2=19 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203780](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-181-rpm-md219-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432037/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =142 rpm Md2=24 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203775](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-142-rpm-md224-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432037/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =123 rpm Md2=28 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203770](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-123-rpm-md228-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432037/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =107 rpm Md2=32 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203765](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-107-rpm-md232-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432037/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =86 rpm Md2=39 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203760](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-86-rpm-md239-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320376/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =75 rpm Md2=46 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203755](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-75-rpm-md246-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320375/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =64 rpm Md2=53 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203750](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-64-rpm-md253-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320375/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =48.5 rpm Md2=70 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203745](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-48-5-rpm-md270-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43203/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =39 rpm Md2=87 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203740](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-39-rpm-md287-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320374/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =36.5 rpm Md2=90 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203735](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-36-5-rpm-md290-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43203/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =29.9 rpm Md2=114 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203730](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-29-9-rpm-md2114-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0,37kW 230/400V 50Hz model B3 IE2 n2 =25.6 rpm Md2=128 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203725](https://maedler.in/product/helical-geared-motor-hr-i-037kw-230-400v-50hz-model-b3-ie2-n2-25-6-rpm-md2128-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =21.1 rpm Md2=155 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203720](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-21-1-rpm-md2155-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =18.3 rpm Md2=180 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203715](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-18-3-rpm-md2180-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =15.1 rpm Md2=218 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203710](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-15-1-rpm-md2218-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =7.8 rpm Md2=423 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203705](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-7-8-rpm-md2423-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43203/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =257 rpm Md2=9 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202585](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-257-rpm-md29-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320258/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =194 rpm Md2=12 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202580](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-194-rpm-md212-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432025/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =142 rpm Md2=16 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202575](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-142-rpm-md216-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432025/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =123 rpm Md2=19 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202570](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-123-rpm-md219-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432025/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =107 rpm Md2=21 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202565](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-107-rpm-md221-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432025/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =75 rpm Md2=31 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202560](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-75-rpm-md231-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320256/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =64 rpm Md2=36 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202555](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-64-rpm-md236-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320255/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =48.5 rpm Md2=47 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202550](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-48-5-rpm-md247-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =37.1 rpm Md2=62 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202545](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-37-1-rpm-md262-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =32 rpm Md2=69 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202540](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-32-rpm-md269-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320254/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =27.6 rpm Md2=80 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202535](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-27-6-rpm-md280-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =22.9 rpm Md2=97 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202530](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-22-9-rpm-md297-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =19.7 rpm Md2=113 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202525](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-19-7-rpm-md2113-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =15.1 rpm Md2=147 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202520](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-15-1-rpm-md2147-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =10.2 rpm Md2=217 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202515](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-10-2-rpm-md2217-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =7.8 rpm Md2=286 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202510](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-7-8-rpm-md2286-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =5.8 rpm Md2=384 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202505](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-5-8-rpm-md2384-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Output flange for helical geared motor HR/I gearbox size 20/2 and 30/2 diameter 200mm overall height 15mm SKU: 43202020](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-20-2-and-30-2-diameter-200mm-overall-height-15mm-sku-43202020/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 20/2 and 30/2 diameter 160mm overall height 15mm SKU: 43202016](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-20-2-and-30-2-diameter-160mm-overall-height-15mm-sku-43202016/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 20/2 and 30/2 diameter 140mm overall height 14.5mm SKU: 43202014](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-20-2-and-30-2-diameter-140mm-overall-height-14-5mm-sku-43202014/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 20/2 and 30/2 diameter 120mm overall height 14.5mm SKU: 43202012](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-20-2-and-30-2-diameter-120mm-overall-height-14-5mm-sku-43202012/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =123 rpm Md2=13 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201870](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-123-rpm-md213-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432018/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =93 rpm Md2=18 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201865](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-93-rpm-md218-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320186/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =86 rpm Md2=19 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201860](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-86-rpm-md219-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320186/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =75 rpm Md2=22 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201855](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-75-rpm-md222-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320185/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =64 rpm Md2=26 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201850](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-64-rpm-md226-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320185/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =48.5 rpm Md2=34 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201845](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-48-5-rpm-md234-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =39 rpm Md2=42 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201840](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-39-rpm-md242-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320184/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =32 rpm Md2=50 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201835](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-32-rpm-md250-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320183/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =27.6 rpm Md2=58 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201830](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-27-6-rpm-md258-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =22.9 rpm Md2 =70 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201825](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-22-9-rpm-md2-70-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =19.7 rpm Md2=81 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201820](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-19-7-rpm-md281-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =16.2 rpm Md2=99 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201815](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-16-2-rpm-md299-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =13.6 rpm Md2=117 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201810](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-13-6-rpm-md2117-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =10.3 rpm Md2=155 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201805](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-10-3-rpm-md2155-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2 =53 rpm Md2=22 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201250](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n2-53-rpm-md222-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320125/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2 =48.5 rpm Md2=25 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201245](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n2-48-5-rpm-md225-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2 =37.1 rpm Md2=32 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201240](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n2-37-1-rpm-md232-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=28.1 rpm Md2=42 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201235](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n228-1-rpm-md242-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=22.6 rpm Md2=53 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201230](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n222-6-rpm-md253-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=19.1 rpm Md2=61 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201225](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n219-1-rpm-md261-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=16.2 rpm Md2=72 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201220](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n216-2-rpm-md272-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=13.6 rpm Md2=85 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201215](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n213-6-rpm-md285-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=10.3 rpm Md2=112 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201210](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n210-3-rpm-md2112-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=7.9 rpm Md2=146 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201205](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n27-9-rpm-md2146-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=123 rpm Md2=7 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200965](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n2123-rpm-md27-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200965/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=107 rpm Md2=8 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200960](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n2107-rpm-md28-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200960/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=93 rpm Md2=9 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200955](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n293-rpm-md29-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200955/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=75 rpm Md2=11 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200950](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n275-rpm-md211-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200950/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=66 rpm Md2=12 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200945](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n266-rpm-md212-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200945/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=53 rpm Md2=16 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200940](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n253-rpm-md216-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200940/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=37.1 rpm Md2=22 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200935](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n237-1-rpm-md222-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=28.1 rpm Md2=29 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200930](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n228-1-rpm-md229-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=22.6 rpm Md2=36 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200925](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n222-6-rpm-md236-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=14,5 rpm Md2=55 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200920](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n2145-rpm-md255-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=10.3 rpm Md2=77 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200915](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n210-3-rpm-md277-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=7.9 rpm Md2=101 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200910](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n27-9-rpm-md2101-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=5.1 rpm Md2=157 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200905](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n25-1-rpm-md2157-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=1000/min i=3:1 output shaft side 2 SKU: 43049216](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n21000-min-i31-output-shaft-side-2-sku-43049216/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182524](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182522](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182520](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182519](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182518](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182518/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182516](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182516/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182430](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182425](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182424](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182424/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182422](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182422/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182420](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182419](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182418](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182416](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182325](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182324](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182322](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182320](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182319](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182318](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182318/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182316](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182316/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182315](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182315/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182225](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182224](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182222](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182220](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182219](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182218](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182218/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182216](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182216/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182215](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182215/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182125](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182124](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182122](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182122/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182120](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182119](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182118](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182118/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182116](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182116/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182115](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182115/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182025](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182024](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182022](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182022/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182020](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182019](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182018](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182018/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182016](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182016/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182015](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182015/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182014](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182014/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182012](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182012/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181925](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181925/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181924](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181924/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181922](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181922/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181920](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181920/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181919](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181919/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181918](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181918/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181916](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181916/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181915](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181915/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181914](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181914/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181912](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181912/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181825](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181825/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181824](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181824/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181822](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181822/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181820](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181820/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181819](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181819/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181818](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181818/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181816](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181816/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181815](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181815/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181814](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181814/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181812](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181812/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181725](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181725/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181724](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181724/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181722](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181722/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181720](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181720/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181719](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181719/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181718](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181718/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181716](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181716/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181715](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181715/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181714](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181714/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181712](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181712/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181625](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181625/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181624](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181624/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181622](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181622/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181620](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181620/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181619](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181619/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181618](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181618/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181616](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181616/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181615](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181615/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181614](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181614/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181612](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181612/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181525](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181524](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181522](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181520](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181519](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181518](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181518/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181516](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181516/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181515](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181515/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181514](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181514/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181512](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181512/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181419](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181418](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=11:1 output speed approx. 247 rpm Md2=6.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306011](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i111-output-speed-approx-247-rpm-md26-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 400 rpm Md2=4.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306007](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i71-output-speed-approx-400-rpm-md24-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=5:1 output speed approx. 560 rpm Md2=3.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306005](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i51-output-speed-approx-560-rpm-md23-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=75:1 output speed approx. 19 rpm permitted Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305075](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i751-output-speed-approx-19-rpm-permitted-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=56:1 output speed approx. 25 rpm permitted Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305056](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i561-output-speed-approx-25-rpm-permitted-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=38:1 output speed approx. 37 rpm permitted Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305038](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i381-output-speed-approx-37-rpm-permitted-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=32:1 output speed approx. 44 rpm permitted Md2=16Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305032](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i321-output-speed-approx-44-rpm-permitted-md216nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm permitted Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305030](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-permitted-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=24:1 output speed approx. 58 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305024](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i241-output-speed-approx-58-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305020](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=17:1 output speed approx. 82 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305017](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i171-output-speed-approx-82-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305015](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=11:1 output speed approx. 124 rpm Md2=9.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305011](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i111-output-speed-approx-124-rpm-md29-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 200 rpm Md2=6.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305007](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i71-output-speed-approx-200-rpm-md26-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=5:1 output speed approx. 280 rpm Md2=4.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305005](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i51-output-speed-approx-280-rpm-md24-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=8.9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302100](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md28-9nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=75:1 output speed approx. 19 rpm permitted Md2=8.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302075](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i751-output-speed-approx-19-rpm-permitted-md28-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=55:1 output speed approx. 25 rpm permitted Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302055](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i551-output-speed-approx-25-rpm-permitted-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302050](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=38:1 output speed approx. 37 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302038](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i381-output-speed-approx-37-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=30:1 output speed approx. 47 rpm Md2=9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302030](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i301-output-speed-approx-47-rpm-md29nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=24:1 output speed approx. 58 rpm Md2=7.2Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302024](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i241-output-speed-approx-58-rpm-md27-2nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=20:1 output speed approx. 70 rpm Md2=7.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302020](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i201-output-speed-approx-70-rpm-md27-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=15:1 output speed approx. 93 rpm Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302015](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i151-output-speed-approx-93-rpm-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=10:1 output speed approx. 140 rpm Md2=4.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302010](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i101-output-speed-approx-140-rpm-md24-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=7:1 output speed approx. 200 rpm Md2=3.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302007](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i71-output-speed-approx-200-rpm-md23-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=5:1 output speed approx. 280 rpm Md2=2.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302005](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i51-output-speed-approx-280-rpm-md22-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=8.9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301100](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md28-9nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=75:1 output speed approx. 19 rpm Md2=6.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301075](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i751-output-speed-approx-19-rpm-md26-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=55:1 output speed approx. 25 rpm Md2=7.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301055](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i551-output-speed-approx-25-rpm-md27-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm Md2=5.7Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301050](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-md25-7nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=38:1 output speed approx. 37 rpm Md2=5.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301038](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i381-output-speed-approx-37-rpm-md25-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=30:1 output speed approx. 47 rpm Md2=4.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301030](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i301-output-speed-approx-47-rpm-md24-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=24:1 output speed approx. 58 rpm Md2=3.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301024](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i241-output-speed-approx-58-rpm-md23-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=20:1 output speed approx. 70 rpm Md2=3.7Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301020](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i201-output-speed-approx-70-rpm-md23-7nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=15:1 output speed approx. 93 rpm Md2=3.0Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301015](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i151-output-speed-approx-93-rpm-md23-0nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=10:1 output speed approx. 140 rpm Md2=2.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301010](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i101-output-speed-approx-140-rpm-md22-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=7:1 output speed approx. 200 rpm Md2=1.7Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301007](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i71-output-speed-approx-200-rpm-md21-7nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=5:1 output speed approx. 280 rpm Md2=1.2Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301005](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i51-output-speed-approx-280-rpm-md21-2nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =416 rpm Md2 =33 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215085](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-416-rpm-md2-33-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321508/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =334 rpm Md2 =41 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215080](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-334-rpm-md2-41-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321508/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =262 rpm Md2 =53 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215075](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-262-rpm-md2-53-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321507/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =225 rpm Md2 =62 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215070](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-225-rpm-md2-62-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321507/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =195 rpm Md2 =71 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215065](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-195-rpm-md2-71-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321506/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =181 rpm Md2 =76 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215060](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-181-rpm-md2-76-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321506/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =142 rpm Md2 =97 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215055](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-142-rpm-md2-97-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321505/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =123 rpm Md2 =113 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215050](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-123-rpm-md2-113-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432150/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =101 rpm Md2 =138 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215045](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-101-rpm-md2-138-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432150/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =86 rpm Md2 =161 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215040](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-86-rpm-md2-161-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321504/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =71 rpm Md2 =195 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215035](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-71-rpm-md2-195-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321503/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =57 rpm Md2 =242 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215030](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-57-rpm-md2-242-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321503/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =48.6 rpm Md2 =285 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215025](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-48-6-rpm-md2-285-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =40.2 rpm Md2 =345 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215020](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-40-2-rpm-md2-345-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =35.9 rpm Md2 =377 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215015](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-35-9-rpm-md2-377-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =30.3 rpm Md2 =448 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215010](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-30-3-rpm-md2-448-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =26.1 rpm Md2 =519 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215005](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-26-1-rpm-md2-519-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =419 rpm Md2 =24 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211085](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-419-rpm-md2-24-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321108/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =336 rpm Md2 =30 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211080](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-336-rpm-md2-30-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321108/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =264 rpm Md2 =38 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211075](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-264-rpm-md2-38-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321107/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =231 rpm Md2 =44 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211070](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-231-rpm-md2-44-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321107/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =200 rpm Md2 =51 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211067](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-200-rpm-md2-51-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =186 rpm Md2 =55 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211065](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-186-rpm-md2-55-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321106/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =143 rpm Md2 =71 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211062](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-143-rpm-md2-71-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321106/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =123 rpm Md2 =82 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211060](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-123-rpm-md2-82-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321106/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =109 rpm Md2 =93 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211057](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-109-rpm-md2-93-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =94 rpm Md2 =108 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211055](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-94-rpm-md2-108-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321105/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =80 rpm Md2 =127 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211050](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-80-rpm-md2-127-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321105/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =67 rpm Md2 =152 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211045](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-67-rpm-md2-152-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321104/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =58 rpm Md2 =176 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211040](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-58-rpm-md2-176-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321104/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =49.0 rpm Md2 =207 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211035](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-49-0-rpm-md2-207-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =40.5 rpm Md2 =251 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211030](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-40-5-rpm-md2-251-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =36.2 rpm Md2 =275 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211025](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-36-2-rpm-md2-275-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =30.5 rpm Md2 =326 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211020](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-30-5-rpm-md2-326-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =26.3 rpm Md2 =378 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211015](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-26-3-rpm-md2-378-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =21.9 rpm Md2 =457 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211010](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-21-9-rpm-md2-457-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =18.8 rpm Md2 =529 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211005](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-18-8-rpm-md2-529-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =419 rpm Md2 =17 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207580](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-419-rpm-md2-17-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =336 rpm Md2 =21 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207575](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-336-rpm-md2-21-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =264 rpm Md2 =26 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207570](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-264-rpm-md2-26-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =231 rpm Md2 =30 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207565](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-231-rpm-md2-30-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =200 rpm Md2 =35 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207560](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-200-rpm-md2-35-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =174 rpm Md2 =40 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207557](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-174-rpm-md2-40-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =143 rpm Md2 =49 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207555](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-143-rpm-md2-49-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =123 rpm Md2 =56 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207552](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-123-rpm-md2-56-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =109 rpm Md2 =64 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207550](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-109-rpm-md2-64-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =89 rpm Md2 =78 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207547](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-89-rpm-md2-78-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320754/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =77 rpm Md2 =91 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207545](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-77-rpm-md2-91-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320754/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =65 rpm Md2 =108 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207542](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-65-rpm-md2-108-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =58 rpm Md2 =121 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207540](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-58-rpm-md2-121-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =49.0 rpm Md2 =142 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207537](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-49-0-rpm-md2-142-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =40.5 rpm Md2 =172 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207535](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-40-5-rpm-md2-172-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =35.6 rpm Md2 =196 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207532](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-35-6-rpm-md2-196-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =30.5 rpm Md2 =224 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207530](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-30-5-rpm-md2-224-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =26.3 rpm Md2 =259 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207525](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-26-3-rpm-md2-259-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =21.7 rpm Md2 =314 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207520](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-21-7-rpm-md2-314-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =17.2 rpm Md2 =396 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207515](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-17-2-rpm-md2-396-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =13.8 rpm Md2 =496 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207510](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-13-8-rpm-md2-496-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =11.4 rpm Md2 =600 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207505](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-11-4-rpm-md2-600-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =257 rpm Md2 =20 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205596](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-257-rpm-md2-20-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =181 rpm Md2 =28 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205595](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-181-rpm-md2-28-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Plate wheel KRL without hub 081 1/2x1/8" 20 teeth material steel SKU: 10222000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-20-teeth-material-steel-sku-10222000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 19 teeth material steel SKU: 10221900](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-19-teeth-material-steel-sku-10221900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 18 teeth material steel SKU: 10221800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-18-teeth-material-steel-sku-10221800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 17 teeth material steel SKU: 10221700](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-17-teeth-material-steel-sku-10221700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 16 teeth material steel SKU: 10221600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-16-teeth-material-steel-sku-10221600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 15 teeth material steel SKU: 10221500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-15-teeth-material-steel-sku-10221500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 14 teeth material steel SKU: 10221400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-14-teeth-material-steel-sku-10221400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 13 teeth material steel SKU: 10221300](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-13-teeth-material-steel-sku-10221300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 12 teeth material steel SKU: 10221200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-12-teeth-material-steel-sku-10221200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 11 teeth material steel SKU: 10221100](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-11-teeth-material-steel-sku-10221100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 10 teeth material steel SKU: 10221000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-10-teeth-material-steel-sku-10221000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 9 teeth material steel SKU: 10220900](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-9-teeth-material-steel-sku-10220900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 8 teeth material steel SKU: 10220800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-8-teeth-material-steel-sku-10220800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 40 teeth material steel SKU: 10214000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-40-teeth-material-steel-sku-10214000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 39 teeth material steel SKU: 10213900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-39-teeth-material-steel-sku-10213900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 38 teeth material steel SKU: 10213800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-38-teeth-material-steel-sku-10213800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 37 teeth material steel SKU: 10213700](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-37-teeth-material-steel-sku-10213700/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 36 teeth material steel SKU: 10213600](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-36-teeth-material-steel-sku-10213600/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 35 teeth material steel SKU: 10213500](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-35-teeth-material-steel-sku-10213500/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 34 teeth material steel SKU: 10213400](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-34-teeth-material-steel-sku-10213400/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 33 teeth material steel SKU: 10213300](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-33-teeth-material-steel-sku-10213300/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 32 teeth material steel SKU: 10213200](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-32-teeth-material-steel-sku-10213200/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 31 teeth material steel SKU: 10213100](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-31-teeth-material-steel-sku-10213100/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 30 teeth material steel SKU: 10213000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-30-teeth-material-steel-sku-10213000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 29 teeth material steel SKU: 10212900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-29-teeth-material-steel-sku-10212900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 28 teeth material steel SKU: 10212800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-28-teeth-material-steel-sku-10212800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 27 teeth material steel SKU: 10212700](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-27-teeth-material-steel-sku-10212700/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 26 teeth material steel SKU: 10212600](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-26-teeth-material-steel-sku-10212600/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 25 teeth material steel SKU: 10212500](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-25-teeth-material-steel-sku-10212500/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 24 teeth material steel SKU: 10212400](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-24-teeth-material-steel-sku-10212400/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 23 teeth material steel SKU: 10212300](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-23-teeth-material-steel-sku-10212300/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 22 teeth material steel SKU: 10212200](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-22-teeth-material-steel-sku-10212200/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 21 teeth material steel SKU: 10212100](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-21-teeth-material-steel-sku-10212100/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 20 teeth material steel SKU: 10212000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-20-teeth-material-steel-sku-10212000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 19 teeth material steel SKU: 10211900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-19-teeth-material-steel-sku-10211900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 18 teeth material steel SKU: 10211800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-18-teeth-material-steel-sku-10211800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 17 teeth material steel SKU: 10211700](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-17-teeth-material-steel-sku-10211700/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 16 teeth material steel SKU: 10211600](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-16-teeth-material-steel-sku-10211600/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 15 teeth material steel SKU: 10211500](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-15-teeth-material-steel-sku-10211500/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 14 teeth material steel SKU: 10211400](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-14-teeth-material-steel-sku-10211400/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 13 teeth material steel SKU: 10211300](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-13-teeth-material-steel-sku-10211300/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 12 teeth material steel SKU: 10211200](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-12-teeth-material-steel-sku-10211200/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 11 teeth material steel SKU: 10211100](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-11-teeth-material-steel-sku-10211100/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 10 teeth material steel SKU: 10211000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-10-teeth-material-steel-sku-10211000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 9 teeth material steel SKU: 10210900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-9-teeth-material-steel-sku-10210900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 8 teeth material steel SKU: 10210800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-8-teeth-material-steel-sku-10210800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/8x7/32" 40 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199140](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-8x7-32-40-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199140/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/8x7/32" 38 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199138](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-8x7-32-38-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199138/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/8x7/32" 32 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199132](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-8x7-32-32-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199132/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199130](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 28 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199128](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-28-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199128/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199125](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199124](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199123](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199122](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199121](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199120](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199119](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199118](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199117](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199116](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199115](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199114](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199113](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199112](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 40 teeth material steel teeth induction hardened SKU: 10188140](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-40-teeth-material-steel-teeth-induction-hardened-sku-10188140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 38 teeth material steel teeth induction hardened SKU: 10188138](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-38-teeth-material-steel-teeth-induction-hardened-sku-10188138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 36 teeth material steel teeth induction hardened SKU: 10188136](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-36-teeth-material-steel-teeth-induction-hardened-sku-10188136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 35 teeth material steel teeth induction hardened SKU: 10188135](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-35-teeth-material-steel-teeth-induction-hardened-sku-10188135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 32 teeth material steel teeth induction hardened SKU: 10188132](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-32-teeth-material-steel-teeth-induction-hardened-sku-10188132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 30 teeth material steel teeth induction hardened SKU: 10188130](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-30-teeth-material-steel-teeth-induction-hardened-sku-10188130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 28 teeth material steel teeth induction hardened SKU: 10188128](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-28-teeth-material-steel-teeth-induction-hardened-sku-10188128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 27 teeth material steel teeth induction hardened SKU: 10188127](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-27-teeth-material-steel-teeth-induction-hardened-sku-10188127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 26 teeth material steel teeth induction hardened SKU: 10188126](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-26-teeth-material-steel-teeth-induction-hardened-sku-10188126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 25 teeth material steel teeth induction hardened SKU: 10188125](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-25-teeth-material-steel-teeth-induction-hardened-sku-10188125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 24 teeth material steel teeth induction hardened SKU: 10188124](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-24-teeth-material-steel-teeth-induction-hardened-sku-10188124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 23 teeth material steel teeth induction hardened SKU: 10188123](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-23-teeth-material-steel-teeth-induction-hardened-sku-10188123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 22 teeth material steel teeth induction hardened SKU: 10188122](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-22-teeth-material-steel-teeth-induction-hardened-sku-10188122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 21 teeth material steel teeth induction hardened SKU: 10188121](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-21-teeth-material-steel-teeth-induction-hardened-sku-10188121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 20 teeth material steel teeth induction hardened SKU: 10188120](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-20-teeth-material-steel-teeth-induction-hardened-sku-10188120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 19 teeth material steel teeth induction hardened SKU: 10188119](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-19-teeth-material-steel-teeth-induction-hardened-sku-10188119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 18 teeth material steel teeth induction hardened SKU: 10188118](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-18-teeth-material-steel-teeth-induction-hardened-sku-10188118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 17 teeth material steel teeth induction hardened SKU: 10188117](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-17-teeth-material-steel-teeth-induction-hardened-sku-10188117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 16 teeth material steel teeth induction hardened SKU: 10188116](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-16-teeth-material-steel-teeth-induction-hardened-sku-10188116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 15 teeth material steel teeth induction hardened SKU: 10188115](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-15-teeth-material-steel-teeth-induction-hardened-sku-10188115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 14 teeth material steel teeth induction hardened SKU: 10188114](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-14-teeth-material-steel-teeth-induction-hardened-sku-10188114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 13 teeth material steel teeth induction hardened SKU: 10188113](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-13-teeth-material-steel-teeth-induction-hardened-sku-10188113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 12 teeth material steel teeth induction hardened SKU: 10188112](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-12-teeth-material-steel-teeth-induction-hardened-sku-10188112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 11 teeth material steel teeth induction hardened SKU: 10188111](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-11-teeth-material-steel-teeth-induction-hardened-sku-10188111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 10 teeth material steel teeth induction hardened SKU: 10188110](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-10-teeth-material-steel-teeth-induction-hardened-sku-10188110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 9 teeth material steel teeth induction hardened SKU: 10188109](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-9-teeth-material-steel-teeth-induction-hardened-sku-10188109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 8 teeth material steel teeth induction hardened SKU: 10188108](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-8-teeth-material-steel-teeth-induction-hardened-sku-10188108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183030](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183028](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183025](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183024](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183022](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183022/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183020](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182530](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182525](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=400:1 output speed approx. 7 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403400](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i4001-output-speed-approx-7-rpm-permitted-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=250:1 output speed approx. 11 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403250](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i2501-output-speed-approx-11-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=125:1 output speed approx. 22 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403125](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i1251-output-speed-approx-22-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=100:1 output speed approx. 28 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403100](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i1001-output-speed-approx-28-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=70:1 output speed approx. 40 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403070](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i701-output-speed-approx-40-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 56 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403050](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i501-output-speed-approx-56-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 112 rpm Md2=6.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403025](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i251-output-speed-approx-112-rpm-md26-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=12.5:1 output speed approx. 224 rpm Md2=3.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403012](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i12-51-output-speed-approx-224-rpm-md23-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=1500:1 output speed approx. 0.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402992](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i15001-output-speed-approx-0-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=1250:1 output speed approx. 1.1 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402990](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i12501-output-speed-approx-1-1-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=750:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402750](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i7501-output-speed-approx-1-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=400:1 output speed approx. 3. 5 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402400](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i4001-output-speed-approx-3-5-rpm-permitted-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=250:1 output speed approx. 5.6 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402250](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i2501-output-speed-approx-5-6-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=125:1 output speed approx. 11 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402125](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i1251-output-speed-approx-11-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402100](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=70:1 output speed approx. 20 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402070](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i701-output-speed-approx-20-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402050](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=25:1 output speed approx. 56 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402025](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i251-output-speed-approx-56-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=12.5:1 output speed approx. 112 rpm Md2=4.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402012](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i12-51-output-speed-approx-112-rpm-md24-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=80:1 output speed approx. 18 rpm permitted Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337080](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i801-output-speed-approx-18-rpm-permitted-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 23 rpm permitted Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337060](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i601-output-speed-approx-23-rpm-permitted-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 28 rpm permitted Md2=32Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337050](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i501-output-speed-approx-28-rpm-permitted-md232nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=40:1 output speed approx. 35 rpm Md2=31Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337040](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i401-output-speed-approx-35-rpm-md231nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337030](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 56 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337025](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i251-output-speed-approx-56-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=21Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337020](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md221nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337015](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=12:1 output speed approx. 117 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337012](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i121-output-speed-approx-117-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=10:1 output speed approx. 140 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337010](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i101-output-speed-approx-140-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=8:1 output speed approx. 175 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337008](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i81-output-speed-approx-175-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 207 rpm Md2=9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337007](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i71-output-speed-approx-207-rpm-md29nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=80:1 output speed approx. 18 rpm permitted Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336080](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i801-output-speed-approx-18-rpm-permitted-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 23 rpm Md2=21Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336060](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i601-output-speed-approx-23-rpm-md221nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 28 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336050](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i501-output-speed-approx-28-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=40:1 output speed approx. 35 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336040](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i401-output-speed-approx-35-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm Md2=20Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336030](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-md220nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 56 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336025](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i251-output-speed-approx-56-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336020](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336015](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=12:1 output speed approx. 117 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336012](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i121-output-speed-approx-117-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=10:1 output speed approx. 140 rpm Md2=9.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336010](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i101-output-speed-approx-140-rpm-md29-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=8:1 output speed approx. 175 rpm Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336008](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i81-output-speed-approx-175-rpm-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 207 rpm Md2=6.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336007](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i71-output-speed-approx-207-rpm-md26-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=75:1 output speed approx. 37 rpm permitted Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331075](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i751-output-speed-approx-37-rpm-permitted-md211nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=56:1 output speed approx. 50 rpm permitted Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331056](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i561-output-speed-approx-50-rpm-permitted-md212nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=38:1 output speed approx. 74 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331038](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i381-output-speed-approx-74-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=32:1 output speed approx. 88 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331032](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i321-output-speed-approx-88-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 93 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331030](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i301-output-speed-approx-93-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=24:1 output speed approx. 117 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331024](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i241-output-speed-approx-117-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 140 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331020](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i201-output-speed-approx-140-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=17:1 output speed approx. 165 rpm Md2=9.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331017](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i171-output-speed-approx-165-rpm-md29-6nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 187 rpm Md2=8.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331015](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i151-output-speed-approx-187-rpm-md28-3nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=11:1 output speed approx. 247 rpm Md2=6.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331011](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i111-output-speed-approx-247-rpm-md26-8nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 400 rpm Md2=4.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331007](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i71-output-speed-approx-400-rpm-md24-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=5:1 output speed approx. 560 rpm Md2=3.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331005](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i51-output-speed-approx-560-rpm-md23-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=75:1 output speed approx. 19 rpm permitted Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330075](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i751-output-speed-approx-19-rpm-permitted-md211nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=56:1 output speed approx. 25 rpm permitted Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330056](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i561-output-speed-approx-25-rpm-permitted-md212nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=38:1 output speed approx. 37 rpm permitted Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330038](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i381-output-speed-approx-37-rpm-permitted-md217nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=32:1 output speed approx. 44 rpm permitted Md2=16Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330032](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i321-output-speed-approx-44-rpm-permitted-md216nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm permitted Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330030](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-permitted-md215nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=24:1 output speed approx. 58 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330024](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i241-output-speed-approx-58-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330020](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=17:1 output speed approx. 82 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330017](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i171-output-speed-approx-82-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330015](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=11:1 output speed approx. 124 rpm Md2=9.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330011](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i111-output-speed-approx-124-rpm-md29-3nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 200 rpm Md2=6.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330007](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i71-output-speed-approx-200-rpm-md26-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=5:1 output speed approx. 280 rpm Md2=4.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330005](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i51-output-speed-approx-280-rpm-md24-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=80:1 output speed approx. 18 rpm zulässiges Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309080](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i801-output-speed-approx-18-rpm-zulassiges-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 23 rpm permitted Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309060](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i601-output-speed-approx-23-rpm-permitted-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 28 rpm permitted Md2=32Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309050](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i501-output-speed-approx-28-rpm-permitted-md232nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=40:1 output speed approx. 35 rpm Md2=31Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309040](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i401-output-speed-approx-35-rpm-md231nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309030](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 56 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309025](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i251-output-speed-approx-56-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=21Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309020](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md221nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309015](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=12:1 output speed approx. 117 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309012](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i121-output-speed-approx-117-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=10:1 output speed approx. 140 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309010](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i101-output-speed-approx-140-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=8:1 output speed ca 175 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309008](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i81-output-speed-ca-175-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-433/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=7:1 output speed ca 207 rpm Md2=9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309007](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i71-output-speed-ca-207-rpm-md29nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4330/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=80:1 output speed approx. 18 rpm permitted Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308080](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i801-output-speed-approx-18-rpm-permitted-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 23 rpm Md2=31Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308060](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i601-output-speed-approx-23-rpm-md231nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 28 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308050](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i501-output-speed-approx-28-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=40:1 output speed approx. 35 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308040](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i401-output-speed-approx-35-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm Md2=20Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308030](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-md220nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 56 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308025](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i251-output-speed-approx-56-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308020](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308015](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=12:1 output speed approx. 117 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308012](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i121-output-speed-approx-117-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=10:1 output speed approx. 140 rpm Md2=9.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308010](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i101-output-speed-approx-140-rpm-md29-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=8:1 output speed approx. 175 rpm Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308008](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i81-output-speed-approx-175-rpm-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 207 rpm Md2=6.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308007](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i71-output-speed-approx-207-rpm-md26-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=75:1 output speed approx. 37 rpm permitted Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306075](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i751-output-speed-approx-37-rpm-permitted-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=56:1 output speed approx. 50 rpm permitted Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306056](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i561-output-speed-approx-50-rpm-permitted-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=38:1 output speed approx. 74 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306038](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i381-output-speed-approx-74-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=32:1 output speed approx. 88 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306032](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i321-output-speed-approx-88-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 93 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306030](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i301-output-speed-approx-93-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=24:1 output speed approx. 117 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306024](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i241-output-speed-approx-117-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 140 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306020](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i201-output-speed-approx-140-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=17:1 output speed approx. 165 rpm Md2=9.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306017](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i171-output-speed-approx-165-rpm-md29-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 187 rpm Md2=8.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306015](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i151-output-speed-approx-187-rpm-md28-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Plate wheel KRL without hub 083 1/2x3/16" 47 teeth material steel SKU: 10324700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-47-teeth-material-steel-sku-10324700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 45 teeth material steel SKU: 10324500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-45-teeth-material-steel-sku-10324500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 42 teeth material steel SKU: 10324200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-42-teeth-material-steel-sku-10324200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 40 teeth material steel SKU: 10324000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-40-teeth-material-steel-sku-10324000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 38 teeth material steel SKU: 10323800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-38-teeth-material-steel-sku-10323800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 36 teeth material steel SKU: 10323600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-36-teeth-material-steel-sku-10323600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 35 teeth material steel SKU: 10323500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-35-teeth-material-steel-sku-10323500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 34 teeth material steel SKU: 10323400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-34-teeth-material-steel-sku-10323400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 32 teeth material steel SKU: 10323200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-32-teeth-material-steel-sku-10323200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 30 teeth material steel SKU: 10323000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-30-teeth-material-steel-sku-10323000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 28 teeth material steel SKU: 10322800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-28-teeth-material-steel-sku-10322800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 27 teeth material steel SKU: 10322700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-27-teeth-material-steel-sku-10322700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 26 teeth material steel SKU: 10322600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-26-teeth-material-steel-sku-10322600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 25 teeth material steel SKU: 10322500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-25-teeth-material-steel-sku-10322500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 24 teeth material steel SKU: 10322400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-24-teeth-material-steel-sku-10322400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 23 teeth material steel SKU: 10322300](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-23-teeth-material-steel-sku-10322300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 22 teeth material steel SKU: 10322200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-22-teeth-material-steel-sku-10322200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 21 teeth material steel SKU: 10322100](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-21-teeth-material-steel-sku-10322100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 20 teeth material steel SKU: 10322000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-20-teeth-material-steel-sku-10322000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 19 teeth material steel SKU: 10321900](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-19-teeth-material-steel-sku-10321900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 18 teeth material steel SKU: 10321800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-18-teeth-material-steel-sku-10321800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 17 teeth material steel SKU: 10321700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-17-teeth-material-steel-sku-10321700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 16 teeth material steel SKU: 10321600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-16-teeth-material-steel-sku-10321600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 15 teeth material steel SKU: 10321500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-15-teeth-material-steel-sku-10321500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 14 teeth material steel SKU: 10321400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-14-teeth-material-steel-sku-10321400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 13 teeth material steel SKU: 10321300](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-13-teeth-material-steel-sku-10321300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 12 teeth material steel SKU: 10321200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-12-teeth-material-steel-sku-10321200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 11 teeth material steel SKU: 10321100](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-11-teeth-material-steel-sku-10321100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 10 teeth material steel SKU: 10321000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-10-teeth-material-steel-sku-10321000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 9 teeth material steel SKU: 10320900](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-9-teeth-material-steel-sku-10320900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 8 teeth material steel SKU: 10320800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-8-teeth-material-steel-sku-10320800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 40 teeth material steel SKU: 10314000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-40-teeth-material-steel-sku-10314000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 39 teeth material steel SKU: 10313900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-39-teeth-material-steel-sku-10313900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 38 teeth material steel SKU: 10313800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-38-teeth-material-steel-sku-10313800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 37 teeth material steel SKU: 10313700](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-37-teeth-material-steel-sku-10313700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 36 teeth material steel SKU: 10313600](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-36-teeth-material-steel-sku-10313600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 35 teeth material steel SKU: 10313500](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-35-teeth-material-steel-sku-10313500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 34 teeth material steel SKU: 10313400](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-34-teeth-material-steel-sku-10313400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 33 teeth material steel SKU: 10313300](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-33-teeth-material-steel-sku-10313300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 32 teeth material steel SKU: 10313200](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-32-teeth-material-steel-sku-10313200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 31 teeth material steel SKU: 10313100](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-31-teeth-material-steel-sku-10313100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 30 teeth material steel SKU: 10313000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-30-teeth-material-steel-sku-10313000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 29 teeth material steel SKU: 10312900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-29-teeth-material-steel-sku-10312900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 28 teeth material steel SKU: 10312800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-28-teeth-material-steel-sku-10312800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 27 teeth material steel SKU: 10312700](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-27-teeth-material-steel-sku-10312700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 26 teeth material steel SKU: 10312600](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-26-teeth-material-steel-sku-10312600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 25 teeth material steel SKU: 10312500](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-25-teeth-material-steel-sku-10312500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 24 teeth material steel SKU: 10312400](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-24-teeth-material-steel-sku-10312400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 23 teeth material steel SKU: 10312300](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-23-teeth-material-steel-sku-10312300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 22 teeth material steel SKU: 10312200](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-22-teeth-material-steel-sku-10312200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 21 teeth material steel SKU: 10312100](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-21-teeth-material-steel-sku-10312100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 20 teeth material steel SKU: 10312000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-20-teeth-material-steel-sku-10312000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 19 teeth material steel SKU: 10311900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-19-teeth-material-steel-sku-10311900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 18 teeth material steel SKU: 10311800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-18-teeth-material-steel-sku-10311800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 17 teeth material steel SKU: 10311700](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-17-teeth-material-steel-sku-10311700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 16 teeth material steel SKU: 10311600](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-16-teeth-material-steel-sku-10311600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 15 teeth material steel SKU: 10311500](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-15-teeth-material-steel-sku-10311500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 14 teeth material steel SKU: 10311400](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-14-teeth-material-steel-sku-10311400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 13 teeth material steel SKU: 10311300](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-13-teeth-material-steel-sku-10311300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 12 teeth material steel SKU: 10311200](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-12-teeth-material-steel-sku-10311200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 11 teeth material steel SKU: 10311100](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-11-teeth-material-steel-sku-10311100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 10 teeth material steel SKU: 10311000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-10-teeth-material-steel-sku-10311000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 9 teeth material steel SKU: 10310900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-9-teeth-material-steel-sku-10310900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 8 teeth material steel SKU: 10310800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-8-teeth-material-steel-sku-10310800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 25 teeth material polyacetal resin SKU: 10252500](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-25-teeth-material-polyacetal-resin-sku-10252500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 23 teeth material polyacetal resin SKU: 10252300](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-23-teeth-material-polyacetal-resin-sku-10252300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 21 teeth material polyacetal resin SKU: 10252100](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-21-teeth-material-polyacetal-resin-sku-10252100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 19 teeth material polyacetal resin SKU: 10251900](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-19-teeth-material-polyacetal-resin-sku-10251900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 17 teeth material polyacetal resin SKU: 10251700](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-17-teeth-material-polyacetal-resin-sku-10251700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 15 teeth material polyacetal resin SKU: 10251500](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-15-teeth-material-polyacetal-resin-sku-10251500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 13 teeth material polyacetal resin SKU: 10251300](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-13-teeth-material-polyacetal-resin-sku-10251300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 114 teeth material steel SKU: 10228800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-114-teeth-material-steel-sku-10228800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 90 teeth material steel SKU: 10228200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-90-teeth-material-steel-sku-10228200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 80 teeth material steel SKU: 10228000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-80-teeth-material-steel-sku-10228000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 76 teeth material steel SKU: 10227600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-76-teeth-material-steel-sku-10227600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 72 teeth material steel SKU: 10227200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-72-teeth-material-steel-sku-10227200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 70 teeth material steel SKU: 10227000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-70-teeth-material-steel-sku-10227000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 65 teeth material steel SKU: 10226500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-65-teeth-material-steel-sku-10226500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 60 teeth material steel SKU: 10226000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-60-teeth-material-steel-sku-10226000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 57 teeth material steel SKU: 10225700](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-57-teeth-material-steel-sku-10225700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 54 teeth material steel SKU: 10225400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-54-teeth-material-steel-sku-10225400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 50 teeth material steel SKU: 10225000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-50-teeth-material-steel-sku-10225000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 48 teeth material steel SKU: 10224800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-48-teeth-material-steel-sku-10224800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 45 teeth material steel SKU: 10224500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-45-teeth-material-steel-sku-10224500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 42 teeth material steel SKU: 10224200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-42-teeth-material-steel-sku-10224200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 40 teeth material steel SKU: 10224000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-40-teeth-material-steel-sku-10224000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 38 teeth material steel SKU: 10223800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-38-teeth-material-steel-sku-10223800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 36 teeth material steel SKU: 10223600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-36-teeth-material-steel-sku-10223600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 35 teeth material steel SKU: 10223500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-35-teeth-material-steel-sku-10223500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 34 teeth material steel SKU: 10223400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-34-teeth-material-steel-sku-10223400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 32 teeth material steel SKU: 10223200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-32-teeth-material-steel-sku-10223200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 30 teeth material steel SKU: 10223000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-30-teeth-material-steel-sku-10223000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 28 teeth material steel SKU: 10222800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-28-teeth-material-steel-sku-10222800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 27 teeth material steel SKU: 10222700](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-27-teeth-material-steel-sku-10222700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 26 teeth material steel SKU: 10222600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-26-teeth-material-steel-sku-10222600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 25 teeth material steel SKU: 10222500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-25-teeth-material-steel-sku-10222500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 24 teeth material steel SKU: 10222400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-24-teeth-material-steel-sku-10222400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 23 teeth material steel SKU: 10222300](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-23-teeth-material-steel-sku-10222300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 22 teeth material steel SKU: 10222200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-22-teeth-material-steel-sku-10222200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 21 teeth material steel SKU: 10222100](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-21-teeth-material-steel-sku-10222100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=106:1 output speed approx. 13 rpm Md2=38Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455106](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i1061-output-speed-approx-13-rpm-md238nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=89:1 output speed approx. 16 rpm Md2=34Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455089](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i891-output-speed-approx-16-rpm-md234nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=71:1 output speed approx. 20 rpm Md2=29Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455071](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i711-output-speed-approx-20-rpm-md229nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=59:1 output speed approx. 24 rpm Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455059](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i591-output-speed-approx-24-rpm-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=41:1 output speed approx. 34 rpm Md2=19Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455041](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i411-output-speed-approx-34-rpm-md219nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=30:1 output speed approx. 47 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455030](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i301-output-speed-approx-47-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=15:1 output speed approx. 95 rpm Md2=7.2Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455015](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i151-output-speed-approx-95-rpm-md27-2nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=500:1 output speed approx. 5.6 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451500](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i5001-output-speed-approx-5-6-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websi/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=375:1 output speed approx. 7.5 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451375](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i3751-output-speed-approx-7-5-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websi/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=190:1 output speed approx. 15 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451190](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i1901-output-speed-approx-15-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=150:1 output speed approx. 19 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451150](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i1501-output-speed-approx-19-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=120:1 output speed approx. 23 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451120](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i1201-output-speed-approx-23-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=100:1 output speed approx. 28 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451100](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i1001-output-speed-approx-28-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=90:1 output speed approx. 31 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451090](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i901-output-speed-approx-31-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 47 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451060](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i601-output-speed-approx-47-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=35:1 output speed approx. 80 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451035](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i351-output-speed-approx-80-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 112 rpm Md2=8.0Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451025](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i251-output-speed-approx-112-rpm-md28-0nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=21:1 output speed approx. 131 rpm Md2=6.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451021](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i211-output-speed-approx-131-rpm-md26-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=12.5:1 output speed approx. 224 rpm Md2=4.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451012](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i12-51-output-speed-approx-224-rpm-md24-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=500:1 output speed approx. 2.8 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450500](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i5001-output-speed-approx-2-8-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=375:1 output speed approx. 3.7 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450375](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i3751-output-speed-approx-3-7-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=190:1 output speed approx. 7.4 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450190](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i1901-output-speed-approx-7-4-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=150:1 output speed approx. 9.3 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450150](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i1501-output-speed-approx-9-3-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=120:1 output speed approx. 12 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450120](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i1201-output-speed-approx-12-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450100](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=90:1 output speed approx. 16 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450090](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i901-output-speed-approx-16-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=60:1 output speed approx. 23 rpm Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450060](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i601-output-speed-approx-23-rpm-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=35:1 output speed approx. 40 rpm Md2=16Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450035](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i351-output-speed-approx-40-rpm-md216nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=25:1 output speed approx. 56 rpm Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450025](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i251-output-speed-approx-56-rpm-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=21:1 output speed approx. 65 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450021](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i211-output-speed-approx-65-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=12.5:1 output speed approx. 112 rpm Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450012](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i12-51-output-speed-approx-112-rpm-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=2500:1 output speed approx. 1.1 rpm permitted Md2=72Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413998](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i25001-output-speed-approx-1-1-rpm-permitted-md272nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=1520:1 output speed approx. 1.8 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413994](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i15201-output-speed-approx-1-8-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=1050:1 output speed approx. 2.7 rpm permitted Md2=113Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413986](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i10501-output-speed-approx-2-7-rpm-permitted-md2113nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413750](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i7501-output-speed-approx-3-7-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=570:1 output speed approx. 4.9 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413570](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i5701-output-speed-approx-4-9-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=450:1 output speed approx. 6.2 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413450](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i4501-output-speed-approx-6-2-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=360:1 output speed approx. 7.8 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413360](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i3601-output-speed-approx-7-8-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=276:1 output speed approx. 10 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413276](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i2761-output-speed-approx-10-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=225:1 output speed approx. 12 rpm Md2=83Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413225](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i2251-output-speed-approx-12-rpm-md283nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=150:1 output speed approx. 19 rpm Md2=57Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413150](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i1501-output-speed-approx-19-rpm-md257nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=105:1 output speed approx. 27 rpm Md2=45Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413105](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i1051-output-speed-approx-27-rpm-md245nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=70:1 output speed approx. 40 rpm Md2=34Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413070](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i701-output-speed-approx-40-rpm-md234nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=2500:1 output speed approx. 0.6 rpm permitted Md2=72Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412998](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i25001-output-speed-approx-0-6-rpm-permitted-md272nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=1520:1 output speed approx. 0.9 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412994](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i15201-output-speed-approx-0-9-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=1050:1 output speed approx. 1.3 rpm permitted Md2=113Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412986](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i10501-output-speed-approx-1-3-rpm-permitted-md2113nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 1.9 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412750](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i7501-output-speed-approx-1-9-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=570:1 output speed approx. 2.5 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412570](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i5701-output-speed-approx-2-5-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=450:1 output speed approx. 3.1 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412450](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i4501-output-speed-approx-3-1-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=360:1 output speed approx. 3.9 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412360](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i3601-output-speed-approx-3-9-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=276:1 output speed approx. 5.1 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412276](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i2761-output-speed-approx-5-1-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=225:1 output speed approx. 6.2 rpm permitted Md2=90Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412225](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i2251-output-speed-approx-6-2-rpm-permitted-md290nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=150:1 output speed approx. 9.3 rpm Md2=73Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412150](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i1501-output-speed-approx-9-3-rpm-md273nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=105:1 output speed approx. 13 rpm Md2=58Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412105](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i1051-output-speed-approx-13-rpm-md258nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=70:1 output speed approx. 20 rpm Md2=46Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412070](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i701-output-speed-approx-20-rpm-md246nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=2250:1 output speed approx. 1.2 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409996](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i22501-output-speed-approx-1-2-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=1500:1 output speed approx. 1.9 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409992](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i15001-output-speed-approx-1-9-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=1140:1 output speed approx. 2.5 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409988](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i11401-output-speed-approx-2-5-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409750](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i7501-output-speed-approx-3-7-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=500:1 output speed approx. 5.6 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409500](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i5001-output-speed-approx-5-6-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=380:1 output speed approx. 7.4 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409380](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i3801-output-speed-approx-7-4-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=300:1 output speed approx. 9.3 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409300](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i3001-output-speed-approx-9-3-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=200:1 output speed approx. 14 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409200](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i2001-output-speed-approx-14-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=100:1 output speed approx. 28 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409100](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i1001-output-speed-approx-28-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 56 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409050](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i501-output-speed-approx-56-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=2250:1 output speed approx. 0.6 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408996](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i22501-output-speed-approx-0-6-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=1500:1 output speed approx. 0.9 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408992](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i15001-output-speed-approx-0-9-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=1140:1 output speed approx. 1.2 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408988](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i11401-output-speed-approx-1-2-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=750:1 output speed approx. 1.9 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408750](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i7501-output-speed-approx-1-9-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=500:1 output speed approx. 2.8 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408500](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i5001-output-speed-approx-2-8-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=380:1 output speed approx. 3.7 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408380](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i3801-output-speed-approx-3-7-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=300:1 output speed approx. 4.7 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408300](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i3001-output-speed-approx-4-7-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=200:1 output speed approx. 7 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408200](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i2001-output-speed-approx-7-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm Md2=32Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408100](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-md232nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm Md2=18Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408050](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-md218nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=1500:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406992](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i15001-output-speed-approx-1-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=1250:1 output speed approx. 2.2 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406990](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i12501-output-speed-approx-2-2-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406750](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i7501-output-speed-approx-3-7-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=400:1 output speed approx. 7 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406400](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i4001-output-speed-approx-7-rpm-permitted-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=250:1 output speed approx. 11 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406250](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i2501-output-speed-approx-11-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=125:1 output speed approx. 22 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406125](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i1251-output-speed-approx-22-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=100:1 output speed approx. 28 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406100](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i1001-output-speed-approx-28-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=70:1 output speed approx. 40 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406070](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i701-output-speed-approx-40-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 56 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406050](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i501-output-speed-approx-56-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 112 rpm Md2=6.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406025](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i251-output-speed-approx-112-rpm-md26-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=12.5:1 output speed approx. 224 rpm Md2=3.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406012](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i12-51-output-speed-approx-224-rpm-md23-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=1500:1 output speed approx. 0.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405992](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i15001-output-speed-approx-0-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=1250:1 output speed approx. 1.1 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405990](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i12501-output-speed-approx-1-1-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=750:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405750](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i7501-output-speed-approx-1-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=400:1 output speed approx. 3.5 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405400](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i4001-output-speed-approx-3-5-rpm-permitted-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=250:1 output speed approx. 5.6 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405250](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i2501-output-speed-approx-5-6-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=125:1 output speed approx. 11 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405125](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i1251-output-speed-approx-11-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405100](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=70:1 output speed approx. 20 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405070](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i701-output-speed-approx-20-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405050](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=25:1 output speed approx. 56 rpm permitted Md2=7 8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405025](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i251-output-speed-approx-56-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=12.5:1 output speed approx. 112 rpm Md2=4.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405012](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i12-51-output-speed-approx-112-rpm-md24-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=1500:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403992](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i15001-output-speed-approx-1-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=1250:1 output speed approx. 2.2 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403990](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i12501-output-speed-approx-2-2-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403750](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i7501-output-speed-approx-3-7-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 50 teeth material steel SKU: 10525000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-50-teeth-material-steel-sku-10525000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 48 teeth material steel SKU: 10524800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-48-teeth-material-steel-sku-10524800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 46 teeth material steel SKU: 10524600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-46-teeth-material-steel-sku-10524600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 45 teeth material steel SKU: 10524500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-45-teeth-material-steel-sku-10524500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 44 teeth material steel SKU: 10524400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-44-teeth-material-steel-sku-10524400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 42 teeth material steel SKU: 10524200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-42-teeth-material-steel-sku-10524200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 40 teeth material steel SKU: 10524000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-40-teeth-material-steel-sku-10524000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 38 teeth material steel SKU: 10523800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-38-teeth-material-steel-sku-10523800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 36 teeth material steel SKU: 10523600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-36-teeth-material-steel-sku-10523600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 35 teeth material steel SKU: 10523500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-35-teeth-material-steel-sku-10523500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 34 teeth material steel SKU: 10523400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-34-teeth-material-steel-sku-10523400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 32 teeth material steel SKU: 10523200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-32-teeth-material-steel-sku-10523200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 30 teeth material steel SKU: 10523000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-30-teeth-material-steel-sku-10523000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 29 teeth material steel SKU: 10522900](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-29-teeth-material-steel-sku-10522900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 28 teeth material steel SKU: 10522800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-28-teeth-material-steel-sku-10522800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 27 teeth material steel SKU: 10522700](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-27-teeth-material-steel-sku-10522700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 26 teeth material steel SKU: 10522600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-26-teeth-material-steel-sku-10522600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 25 teeth material steel SKU: 10522500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-25-teeth-material-steel-sku-10522500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 24 teeth material steel SKU: 10522400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-24-teeth-material-steel-sku-10522400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 23 teeth material steel SKU: 10522300](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-23-teeth-material-steel-sku-10522300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 22 teeth material steel SKU: 10522200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-22-teeth-material-steel-sku-10522200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 21 teeth material steel SKU: 10522100](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-21-teeth-material-steel-sku-10522100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 20 teeth material steel SKU: 10522000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-20-teeth-material-steel-sku-10522000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 19 teeth material steel SKU: 10521900](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-19-teeth-material-steel-sku-10521900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 18 teeth material steel SKU: 10521800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-18-teeth-material-steel-sku-10521800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 17 teeth material steel SKU: 10521700](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-17-teeth-material-steel-sku-10521700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 16 teeth material steel SKU: 10521600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-16-teeth-material-steel-sku-10521600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 15 teeth material steel SKU: 10521500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-15-teeth-material-steel-sku-10521500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 14 teeth material steel SKU: 10521400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-14-teeth-material-steel-sku-10521400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 13 teeth material steel SKU: 10521300](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-13-teeth-material-steel-sku-10521300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 12 teeth material steel SKU: 10521200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-12-teeth-material-steel-sku-10521200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 11 teeth material steel SKU: 10521100](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-11-teeth-material-steel-sku-10521100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 10 teeth material steel SKU: 10521000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-10-teeth-material-steel-sku-10521000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 9 teeth material steel SKU: 10520900](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-9-teeth-material-steel-sku-10520900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 8 teeth material steel SKU: 10520800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-8-teeth-material-steel-sku-10520800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 114 teeth material cast iron SKU: 10518800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-114-teeth-material-cast-iron-sku-10518800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 95 teeth material cast iron SKU: 10518300](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-95-teeth-material-cast-iron-sku-10518300/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 76 teeth material cast iron SKU: 10517600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-76-teeth-material-cast-iron-sku-10517600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 57 teeth material cast iron SKU: 10515700](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-57-teeth-material-cast-iron-sku-10515700/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 45 teeth material cast iron SKU: 10514500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-45-teeth-material-cast-iron-sku-10514500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 40 teeth material steel SKU: 10514000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-40-teeth-material-steel-sku-10514000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 38 teeth material steel SKU: 10513800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-38-teeth-material-steel-sku-10513800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 36 teeth material steel SKU: 10513600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-36-teeth-material-steel-sku-10513600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 35 teeth material steel SKU: 10513500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-35-teeth-material-steel-sku-10513500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 34 teeth material steel SKU: 10513400](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-34-teeth-material-steel-sku-10513400/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 32 teeth material steel SKU: 10513200](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-32-teeth-material-steel-sku-10513200/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 30 teeth material steel SKU: 10513000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-30-teeth-material-steel-sku-10513000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 29 teeth material steel SKU: 10512900](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-29-teeth-material-steel-sku-10512900/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 28 teeth material steel SKU: 10512800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-28-teeth-material-steel-sku-10512800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 27 teeth material steel SKU: 10512700](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-27-teeth-material-steel-sku-10512700/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 26 teeth material steel SKU: 10512600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-26-teeth-material-steel-sku-10512600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 25 teeth material steel SKU: 10512500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-25-teeth-material-steel-sku-10512500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 24 teeth material steel SKU: 10512400](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-24-teeth-material-steel-sku-10512400/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 23 teeth material steel SKU: 10512300](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-23-teeth-material-steel-sku-10512300/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 22 teeth material steel SKU: 10512200](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-22-teeth-material-steel-sku-10512200/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 21 teeth material steel SKU: 10512100](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-21-teeth-material-steel-sku-10512100/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 20 teeth material steel SKU: 10512000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-20-teeth-material-steel-sku-10512000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 19 teeth material steel SKU: 10511900](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-19-teeth-material-steel-sku-10511900/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 18 teeth material steel SKU: 10511800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-18-teeth-material-steel-sku-10511800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 17 teeth material steel SKU: 10511700](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-17-teeth-material-steel-sku-10511700/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 16 teeth material steel SKU: 10511600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-16-teeth-material-steel-sku-10511600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 15 teeth material steel SKU: 10511500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-15-teeth-material-steel-sku-10511500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 14 teeth material steel SKU: 10511400](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-14-teeth-material-steel-sku-10511400/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 13 teeth material steel SKU: 10511300](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-13-teeth-material-steel-sku-10511300/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 12 teeth material steel SKU: 10511200](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-12-teeth-material-steel-sku-10511200/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 11 teeth material steel SKU: 10511100](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-11-teeth-material-steel-sku-10511100/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 10 teeth material steel SKU: 10511000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-10-teeth-material-steel-sku-10511000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 9 teeth material steel SKU: 10510900](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-9-teeth-material-steel-sku-10510900/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 8 teeth material steel SKU: 10510800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-8-teeth-material-steel-sku-10510800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399130](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399125](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399123](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399121](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399120](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399119](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399118](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399117](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399116](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399115](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399113](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399112](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 25 teeth material polyacetal resin SKU: 10352500](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-25-teeth-material-polyacetal-resin-sku-10352500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 23 teeth material polyacetal resin SKU: 10352300](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-23-teeth-material-polyacetal-resin-sku-10352300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 21 teeth material polyacetal resin SKU: 10352100](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-21-teeth-material-polyacetal-resin-sku-10352100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 19 teeth material polyacetal resin SKU: 10351900](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-19-teeth-material-polyacetal-resin-sku-10351900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 17 teeth material polyacetal resin SKU: 10351700](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-17-teeth-material-polyacetal-resin-sku-10351700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 15 teeth material polyacetal resin SKU: 10351500](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-15-teeth-material-polyacetal-resin-sku-10351500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 13 teeth material polyacetal resin SKU: 10351300](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-13-teeth-material-polyacetal-resin-sku-10351300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 114 teeth material steel SKU: 10328800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-114-teeth-material-steel-sku-10328800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 90 teeth material steel SKU: 10328200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-90-teeth-material-steel-sku-10328200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 80 teeth material steel SKU: 10328000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-80-teeth-material-steel-sku-10328000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 76 teeth material steel SKU: 10327600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-76-teeth-material-steel-sku-10327600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 72 teeth material steel SKU: 10327200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-72-teeth-material-steel-sku-10327200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 70 teeth material steel SKU: 10327000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-70-teeth-material-steel-sku-10327000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 65 teeth material steel SKU: 10326500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-65-teeth-material-steel-sku-10326500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 60 teeth material steel SKU: 10326000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-60-teeth-material-steel-sku-10326000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 57 teeth material steel SKU: 10325700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-57-teeth-material-steel-sku-10325700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 54 teeth material steel SKU: 10325400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-54-teeth-material-steel-sku-10325400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 50 teeth material steel SKU: 10325000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-50-teeth-material-steel-sku-10325000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 48 teeth material steel SKU: 10324800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-48-teeth-material-steel-sku-10324800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Control Box GR/I input 230V AC output 24V DC for 1-2 actuators with IEC power cord length 3 m SKU: 47519012](https://maedler.in/product/control-box-gr-i-input-230v-ac-output-24v-dc-for-1-2-actuators-with-iec-power-cord-length-3-m-sku-47519012/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 230V AC output 24V DC for 1 actuator with IEC power cord length 3 m SKU: 47519011](https://maedler.in/product/control-box-gr-i-input-230v-ac-output-24v-dc-for-1-actuator-with-iec-power-cord-length-3-m-sku-47519011/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 1000mm SKU: 47514100](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-1000mm-sku-47514100/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 800mm SKU: 47514080](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-800mm-sku-47514080/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 600mm SKU: 47514060](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-600mm-sku-47514060/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 500mm SKU: 47514050](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-500mm-sku-47514050/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 400mm SKU: 47514040](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-400mm-sku-47514040/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 300mm SKU: 47514030](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-300mm-sku-47514030/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 200mm SKU: 47514020](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-200mm-sku-47514020/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 100mm SKU: 47514010](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-100mm-sku-47514010/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 1000mm SKU: 47513100](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-1000mm-sku-47513100/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 800mm SKU: 47513080](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-800mm-sku-47513080/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 600mm SKU: 47513060](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-600mm-sku-47513060/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 500mm SKU: 47513050](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-500mm-sku-47513050/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 400mm SKU: 47513040](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-400mm-sku-47513040/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 300mm SKU: 47513030](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-300mm-sku-47513030/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 200mm SKU: 47513020](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-200mm-sku-47513020/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 100mm SKU: 47513010](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-100mm-sku-47513010/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Worm gear screw jack NPK size 4 version C basic gearbox without spindle for spindle KGT 40x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750244005](https://maedler.in/product/worm-gear-screw-jack-npk-size-4-version-c-basic-gearbox-without-spindle-for-spindle-kgt-40x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 4 type C basic gearbox without spindle for spindle Tr.40x7 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502400](https://maedler.in/product/worm-gear-screw-jack-npt-size-4-type-c-basic-gearbox-without-spindle-for-spindle-tr-40x7-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475024/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 3 version C basic gearbox without spindle for spindle KGT 32x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750233205](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-c-basic-gearbox-without-spindle-for-spindle-kgt-32x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPK size 3 version C basic gearbox without spindle for spindle KGT 25x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750232505](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-c-basic-gearbox-without-spindle-for-spindle-kgt-25x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 3 type C basic gearbox without spindle for spindle Tr.30x6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502300](https://maedler.in/product/worm-gear-screw-jack-npt-size-3-type-c-basic-gearbox-without-spindle-for-spindle-tr-30x6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475023/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 2 version C basic gearbox without spindle for spindle KGT 20x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750222005](https://maedler.in/product/worm-gear-screw-jack-npk-size-2-version-c-basic-gearbox-without-spindle-for-spindle-kgt-20x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 2 type C basic gearbox without spindle for spindle Tr.20x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502200](https://maedler.in/product/worm-gear-screw-jack-npt-size-2-type-c-basic-gearbox-without-spindle-for-spindle-tr-20x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475022/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 1 version C basic gearbox without spindle for spindle KGT 16x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750211605](https://maedler.in/product/worm-gear-screw-jack-npk-size-1-version-c-basic-gearbox-without-spindle-for-spindle-kgt-16x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 1 type C basic gearbox without spindle for spindle Tr.18x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502100](https://maedler.in/product/worm-gear-screw-jack-npt-size-1-type-c-basic-gearbox-without-spindle-for-spindle-tr-18x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475021/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPT size 0 type C basic gearbox without spindle for spindle Tr16x4. (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502000](https://maedler.in/product/worm-gear-screw-jack-npt-size-0-type-c-basic-gearbox-without-spindle-for-spindle-tr16x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475020/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 4 version B basic gearbox without spindle for spindle KGT 40x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750144005](https://maedler.in/product/worm-gear-screw-jack-npk-size-4-version-b-basic-gearbox-without-spindle-for-spindle-kgt-40x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 4 type B basic gearbox without spindle for spindle Tr.40x7 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47501400](https://maedler.in/product/worm-gear-screw-jack-npt-size-4-type-b-basic-gearbox-without-spindle-for-spindle-tr-40x7-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475014/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 3 version B basic gearbox without spindle for spindle KGT 32x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750133205](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-b-basic-gearbox-without-spindle-for-spindle-kgt-32x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPK size 3 version B basic gearbox without spindle for spindle KGT 25x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750132505](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-b-basic-gearbox-without-spindle-for-spindle-kgt-25x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 3 type B basic gearbox without spindle for spindle Tr.30x6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47501300](https://maedler.in/product/worm-gear-screw-jack-npt-size-3-type-b-basic-gearbox-without-spindle-for-spindle-tr-30x6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475013/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 2 version B basic gearbox without spindle for spindle KGT 20x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750122005](https://maedler.in/product/worm-gear-screw-jack-npk-size-2-version-b-basic-gearbox-without-spindle-for-spindle-kgt-20x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 2 type B basic gearbox without spindle for spindle Tr.20x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47501200](https://maedler.in/product/worm-gear-screw-jack-npt-size-2-type-b-basic-gearbox-without-spindle-for-spindle-tr-20x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475012/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 1 version B basic gearbox without spindle for spindle KGT 16x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750111605](https://maedler.in/product/worm-gear-screw-jack-npk-size-1-version-b-basic-gearbox-without-spindle-for-spindle-kgt-16x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 1 type B basic gearbox without spindle for spindle Tr.18x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47501100](https://maedler.in/product/worm-gear-screw-jack-npt-size-1-type-b-basic-gearbox-without-spindle-for-spindle-tr-18x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475011/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPT size 0 type B basic gearbox without spindle for spindle Tr.16x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500600](https://maedler.in/product/worm-gear-screw-jack-npt-size-0-type-b-basic-gearbox-without-spindle-for-spindle-tr-16x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475006/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 4 version A basic gearbox without spindle for spindle KGT 40x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750044005](https://maedler.in/product/worm-gear-screw-jack-npk-size-4-version-a-basic-gearbox-without-spindle-for-spindle-kgt-40x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Travelling nut for worm gear screw jack NPT version C size 4 with trapezoidal thread Tr. 40x7 SKU: 47500416](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-4-with-trapezoidal-thread-tr-40x7-sku-47500416/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT and NPK version A and B size 4 outer Ø 110mm M30 SKU: 47500415](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-and-npk-version-a-and-b-size-4-outer-o-110mm-m30-sku-47500415/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT and NPK size 4 bearing inner Ø 35mm SKU: 47500414](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-and-npk-size-4-bearing-inner-o-35mm-sku-47500414/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT and NPK type Z2 size 4 180x145mm pins at long side SKU: 47500413](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z2-size-4-180x145mm-pins-at-long-side-sku-47500413/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT and NPK type Z1 size 4 180x145mm pins at short side SKU: 47500412](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z1-size-4-180x145mm-pins-at-short-side-sku-47500412/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT and NPK size 4 length 230mm SKU: 47500411](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-and-npk-size-4-length-230mm-sku-47500411/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 4 version A basic gearbox without spindle for spindle Tr.40x7 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500400](https://maedler.in/product/worm-gear-screw-jack-npt-size-4-version-a-basic-gearbox-without-spindle-for-spindle-tr-40x7-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Travelling nut for worm gear screw jack NPK version C size 4 with ball thread KGT 40x5 SKU: 475004LM1](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-4-with-ball-thread-kgt-40x5-sku-475004lm1/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Worm gear screw jack NPK size 3 version A basic gearbox without spindle for spindle KGT 32x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750033205](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-a-basic-gearbox-without-spindle-for-spindle-kgt-32x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPK size 3 version A basic gearbox without spindle for spindle KGT 25x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750032505](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-a-basic-gearbox-without-spindle-for-spindle-kgt-25x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Travelling nut for worm gear screw jack NPT version C size 3 with trapezoidal thread Tr. 30x6 SKU: 47500316](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-3-with-trapezoidal-thread-tr-30x6-sku-47500316/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT and NPK version A and B size 3 outer Ø 90mm M20 SKU: 47500315](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-and-npk-version-a-and-b-size-3-outer-o-90mm-m20-sku-47500315/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT and NPK size 3 bearing inner Ø 25mm SKU: 47500314](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-and-npk-size-3-bearing-inner-o-25mm-sku-47500314/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT and NPK type Z2 size 3 130x105mm pins at long side SKU: 47500313](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z2-size-3-130x105mm-pins-at-long-side-sku-47500313/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT and NPK type Z1 size 3 130x105mm pins at short side SKU: 47500312](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z1-size-3-130x105mm-pins-at-short-side-sku-47500312/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT and NPK size 3 length 170mm SKU: 47500311](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-and-npk-size-3-length-170mm-sku-47500311/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 3 version A basic gearbox without spindle for spindle Tr.30x6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500300](https://maedler.in/product/worm-gear-screw-jack-npt-size-3-version-a-basic-gearbox-without-spindle-for-spindle-tr-30x6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Travelling nut for worm gear screw jack NPK version C size 3 with ball thread KGT 32x5 SKU: 475003LM6](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-3-with-ball-thread-kgt-32x5-sku-475003lm6/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Travelling nut for worm gear screw jack NPK version C size 3 with ball thread KGT 25x5 SKU: 475003LM1](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-3-with-ball-thread-kgt-25x5-sku-475003lm1/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Worm gear screw jack NPK size 2 version A basic gearbox without spindle for spindle KGT 20x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750022005](https://maedler.in/product/worm-gear-screw-jack-npk-size-2-version-a-basic-gearbox-without-spindle-for-spindle-kgt-20x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Travelling nut for worm gear screw jack NPT version C size 2 with trapezoidal thread Tr. 20x4 SKU: 47500216](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-2-with-trapezoidal-thread-tr-20x4-sku-47500216/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT and NPK version A and B size 2 outer Ø 80mm M14 SKU: 47500215](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-and-npk-version-a-and-b-size-2-outer-o-80mm-m14-sku-47500215/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT and NPK size 2 bearing inner Ø 20mm SKU: 47500214](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-and-npk-size-2-bearing-inner-o-20mm-sku-47500214/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT and NPK type Z2 size 2 100x85mm pins at long side SKU: 47500213](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z2-size-2-100x85mm-pins-at-long-side-sku-47500213/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT and NPK type Z1 size 2 100x85mm pins at short side SKU: 47500212](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z1-size-2-100x85mm-pins-at-short-side-sku-47500212/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT and NPK size 2 length 140mm SKU: 47500211](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-and-npk-size-2-length-140mm-sku-47500211/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 2 version A basic gearbox without spindle for spindle Tr.20x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500200](https://maedler.in/product/worm-gear-screw-jack-npt-size-2-version-a-basic-gearbox-without-spindle-for-spindle-tr-20x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4750/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Travelling nut for worm gear screw jack NPK version C size 2 with ball thread KGT 20x5 SKU: 475002LM1](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-2-with-ball-thread-kgt-20x5-sku-475002lm1/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Worm gear screw jack NPK size 1 version A basic gearbox without spindle for spindle KGT 16x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750011605](https://maedler.in/product/worm-gear-screw-jack-npk-size-1-version-a-basic-gearbox-without-spindle-for-spindle-kgt-16x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Travelling nut for worm gear screw jack NPT version C size 1 with trapezoidal thread Tr. 18x4 SKU: 47500116](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-1-with-trapezoidal-thread-tr-18x4-sku-47500116/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT and NPK version A and B size 1 outer Ø 65mm M12 SKU: 47500115](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-and-npk-version-a-and-b-size-1-outer-o-65mm-m12-sku-47500115/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT and NPK size 1 bearing inner Ø 15mm SKU: 47500114](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-and-npk-size-1-bearing-inner-o-15mm-sku-47500114/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT and NPK type Z2 size 1 80x72 mm pins at long side SKU: 47500113](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z2-size-1-80x72-mm-pins-at-long-side-sku-47500113/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT and NPK type Z1 size 1 80x72 mm pins at short side SKU: 47500112](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z1-size-1-80x72-mm-pins-at-short-side-sku-47500112/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT and NPK size 1 length 120mm SKU: 47500111](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-and-npk-size-1-length-120mm-sku-47500111/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 1 version A basic gearbox without spindle for spindle Tr.18x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500100](https://maedler.in/product/worm-gear-screw-jack-npt-size-1-version-a-basic-gearbox-without-spindle-for-spindle-tr-18x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Travelling nut for worm gear screw jack NPK version C size 1 with ball thread KGT 16x5 SKU: 475001LM1](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-1-with-ball-thread-kgt-16x5-sku-475001lm1/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Travelling nut for worm gear screw jack NPT version C size 0 with trapezoidal thread Tr. 16x4 SKU: 47500016](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-0-with-trapezoidal-thread-tr-16x4-sku-47500016/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT version A and B size 0 outer Ø 50mm M10 SKU: 47500015](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-version-a-and-b-size-0-outer-o-50mm-m10-sku-47500015/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT size 0 bearing inner Ø 10mm SKU: 47500014](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-size-0-bearing-inner-o-10mm-sku-47500014/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT type Z2 size 0 64x54mm pins at long side SKU: 47500013](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-type-z2-size-0-64x54mm-pins-at-long-side-sku-47500013/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT type Z1 size 0 64x54mm pins at short side SKU: 47500012](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-type-z1-size-0-64x54mm-pins-at-short-side-sku-47500012/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT size 0 length 90mm SKU: 47500011](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-size-0-length-90mm-sku-47500011/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 0 version A basic gearbox without spindle for spindle Tr.16x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500000](https://maedler.in/product/worm-gear-screw-jack-npt-size-0-version-a-basic-gearbox-without-spindle-for-spindle-tr-16x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=591:1 output speed approx. 4.7 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456591](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i5911-output-speed-approx-4-7-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websi/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=443:1 output speed approx. 6,3 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456443](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i4431-output-speed-approx-63-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websi/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=295:1 output speed approx. 9.5 rpm Md2=46Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456295](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i2951-output-speed-approx-9-5-rpm-md246nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=177:1 output speed approx. 16 rpm Md2=37Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456177](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i1771-output-speed-approx-16-rpm-md237nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=142:1 output speed approx. 20 rpm Md2=30Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456142](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i1421-output-speed-approx-20-rpm-md230nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=106:1 output speed approx. 26 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456106](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i1061-output-speed-approx-26-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=89:1 output speed approx. 32 rpm Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456089](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i891-output-speed-approx-32-rpm-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=71:1 output speed approx. 39 rpm Md2=20Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456071](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i711-output-speed-approx-39-rpm-md220nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=59:1 output speed approx. 47 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456059](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i591-output-speed-approx-47-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=41:1 output speed approx. 68 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456041](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i411-output-speed-approx-68-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 95 rpm Md2=9.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456030](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i301-output-speed-approx-95-rpm-md29-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 190 rpm Md2=4.9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456015](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i151-output-speed-approx-190-rpm-md24-9nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=591:1 output speed approx. 2.4 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455591](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i5911-output-speed-approx-2-4-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=443:1 output speed approx. 3.2 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455443](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i4431-output-speed-approx-3-2-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=295:1 output speed approx. 4.7 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455295](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i2951-output-speed-approx-4-7-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=177:1 output speed approx. 7.9 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455177](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i1771-output-speed-approx-7-9-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=142:1 output speed approx. 10 rpm Md2=41Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455142](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i1421-output-speed-approx-10-rpm-md241nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581515](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581514](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581512](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581428](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581425](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581422](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581422/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581420](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581420/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581419](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581419/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581418](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581418/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581416](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581416/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581415](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581415/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581414](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581414/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581412](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581412/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581328](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581325](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581324](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581324/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581322](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581322/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581320](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581320/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581318](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581318/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581316](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581316/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581315](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581315/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581314](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581314/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581312](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581312/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581225](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581224](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581224/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581222](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581222/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581220](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581220/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581219](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581219/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581218](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581218/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581216](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581216/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581215](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581215/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581214](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581214/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581212](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581212/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581119](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581119/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581118](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581118/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581116](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581116/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581115](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581115/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581114](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581114/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581112](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581112/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581016](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581016/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581015](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581015/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581014](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581014/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581012](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581012/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRTG 08 B-1 1/2x5/16" 30 teeth material steel teeth hardened for taper bush type 2012 SKU: 10578130](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10578130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 28 teeth material steel teeth hardened for taper bush type 2012 SKU: 10578128](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10578128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 27 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578127](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 26 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578126](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 25 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578125](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 24 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578124](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 23 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578123](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 22 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578122](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 21 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578121](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 20 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578120](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 19 teeth material steel teeth hardened for taper bush type 1210 SKU: 10578119](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10578119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 18 teeth material steel teeth hardened for taper bush type 1210 SKU: 10578118](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10578118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 17 teeth material steel teeth hardened for taper bush type 1210 SKU: 10578117](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10578117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 16 teeth material steel teeth hardened for taper bush type 1108 SKU: 10578116](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-1108-sku-10578116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 15 teeth material steel teeth hardened for taper bush type 1008 SKU: 10578115](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10578115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 114 teeth material cast iron for taper bush type 2517 SKU: 10577188G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-114-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10577188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 95 teeth material cast iron for taper bush type 2012 SKU: 10577183G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-95-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10577183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 76 teeth material cast iron for taper bush type 2012 SKU: 10577176G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-76-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10577176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 76 teeth material steel for taper bush type 2012 SKU: 10577176](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-76-teeth-material-steel-for-taper-bush-type-2012-sku-10577176/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 57 teeth material cast iron for taper bush type 2012 SKU: 10577157G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-57-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10577157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 57 teeth material steel for taper bush type 2012 SKU: 10577157](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-57-teeth-material-steel-for-taper-bush-type-2012-sku-10577157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 45 teeth material steel for taper bush type 2012 SKU: 10577145](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-45-teeth-material-steel-for-taper-bush-type-2012-sku-10577145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 38 teeth material steel for taper bush type 2012 SKU: 10577138](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-38-teeth-material-steel-for-taper-bush-type-2012-sku-10577138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 30 teeth material steel for taper bush type 2012 SKU: 10577130](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-30-teeth-material-steel-for-taper-bush-type-2012-sku-10577130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 28 teeth material steel for taper bush type 2012 SKU: 10577128](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-28-teeth-material-steel-for-taper-bush-type-2012-sku-10577128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 27 teeth material steel for taper bush type 1610 SKU: 10577127](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-27-teeth-material-steel-for-taper-bush-type-1610-sku-10577127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 26 teeth material steel for taper bush type 1610 SKU: 10577126](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-26-teeth-material-steel-for-taper-bush-type-1610-sku-10577126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 25 teeth material steel for taper bush type 1610 SKU: 10577125](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-25-teeth-material-steel-for-taper-bush-type-1610-sku-10577125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 24 teeth material steel for taper bush type 1610 SKU: 10577124](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-24-teeth-material-steel-for-taper-bush-type-1610-sku-10577124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 23 teeth material steel for taper bush type 1610 SKU: 10577123](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-23-teeth-material-steel-for-taper-bush-type-1610-sku-10577123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 22 teeth material steel for taper bush type 1610 SKU: 10577122](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-22-teeth-material-steel-for-taper-bush-type-1610-sku-10577122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 21 teeth material steel for taper bush type 1610 SKU: 10577121](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-21-teeth-material-steel-for-taper-bush-type-1610-sku-10577121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 20 teeth material steel for taper bush type 1610 SKU: 10577120](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-20-teeth-material-steel-for-taper-bush-type-1610-sku-10577120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 19 teeth material steel for taper bush type 1210 SKU: 10577119](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-19-teeth-material-steel-for-taper-bush-type-1210-sku-10577119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 18 teeth material steel for taper bush type 1210 SKU: 10577118](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-18-teeth-material-steel-for-taper-bush-type-1210-sku-10577118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 17 teeth material steel for taper bush type 1210 SKU: 10577117](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-17-teeth-material-steel-for-taper-bush-type-1210-sku-10577117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 16 teeth material steel for taper bush type 1108 SKU: 10577116](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-16-teeth-material-steel-for-taper-bush-type-1108-sku-10577116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 15 teeth material steel for taper bush type 1008 SKU: 10577115](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-15-teeth-material-steel-for-taper-bush-type-1008-sku-10577115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 14 teeth material steel for taper bush type 1008 SKU: 10577114](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-14-teeth-material-steel-for-taper-bush-type-1008-sku-10577114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 25 teeth material polyacetal resin SKU: 10552500](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-25-teeth-material-polyacetal-resin-sku-10552500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 23 teeth material polyacetal resin SKU: 10552300](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-23-teeth-material-polyacetal-resin-sku-10552300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 21 teeth material polyacetal resin SKU: 10552100](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-21-teeth-material-polyacetal-resin-sku-10552100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 19 teeth material polyacetal resin SKU: 10551900](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-19-teeth-material-polyacetal-resin-sku-10551900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 17 teeth material polyacetal resin SKU: 10551700](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-17-teeth-material-polyacetal-resin-sku-10551700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 15 teeth material polyacetal resin SKU: 10551500](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-15-teeth-material-polyacetal-resin-sku-10551500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 13 teeth material polyacetal resin SKU: 10551300](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-13-teeth-material-polyacetal-resin-sku-10551300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 120 teeth material steel SKU: 10529000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-120-teeth-material-steel-sku-10529000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 114 teeth material steel SKU: 10528800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-114-teeth-material-steel-sku-10528800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 95 teeth material steel SKU: 10528300](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-95-teeth-material-steel-sku-10528300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 80 teeth material steel SKU: 10528000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-80-teeth-material-steel-sku-10528000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 76 teeth material steel SKU: 10527600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-76-teeth-material-steel-sku-10527600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 72 teeth material steel SKU: 10527200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-72-teeth-material-steel-sku-10527200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 70 teeth material steel SKU: 10527000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-70-teeth-material-steel-sku-10527000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 65 teeth material steel SKU: 10526500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-65-teeth-material-steel-sku-10526500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 60 teeth material steel SKU: 10526000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-60-teeth-material-steel-sku-10526000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 57 teeth material steel SKU: 10525700](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-57-teeth-material-steel-sku-10525700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 54 teeth material steel SKU: 10525400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-54-teeth-material-steel-sku-10525400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Central drive system for travel-wheel system RB/I size 250 up to distance 2900mm diameter 45mm length approx. 2470mm SKU: 48035784](https://maedler.in/product/central-drive-system-for-travel-wheel-system-rb-i-size-250-up-to-distance-2900mm-diameter-45mm-length-approx-2470mm-sku-48035784/): Material: Splined shaft, coupling, washers and rings made of steel, shaft protection made of plastic. Two sizes available suiting travel-wheel system 200 and 250. Two length for gauges up to 1500 mm or up to 2900 mm. Consisting of: Splined shaft, coupling with pin, shaft protection, washers and retaining rings. The central-drive set serves to combine two travel-wheel sets RB/I with a geared motor RBM/I to make up a central drive. To achieve this, the shaft is shortened to the required length on the coupling side, then the shaft protection cap is taken off the geared motor and the shafts are connected using the rigid coupling. The pin serves as stop inside the coupling. The shaft is fixed in the travel-wheel system with the retaining rings. - [Central drive system for travel-wheel system RB/I size 250 up to distance 1500mm diameter 45mm length approx. 1070mm SKU: 48035684](https://maedler.in/product/central-drive-system-for-travel-wheel-system-rb-i-size-250-up-to-distance-1500mm-diameter-45mm-length-approx-1070mm-sku-48035684/): Material: Splined shaft, coupling, washers and rings made of steel, shaft protection made of plastic. Two sizes available suiting travel-wheel system 200 and 250. Two length for gauges up to 1500 mm or up to 2900 mm. Consisting of: Splined shaft, coupling with pin, shaft protection, washers and retaining rings. The central-drive set serves to combine two travel-wheel sets RB/I with a geared motor RBM/I to make up a central drive. To achieve this, the shaft is shortened to the required length on the coupling side, then the shaft protection cap is taken off the geared motor and the shafts are connected using the rigid coupling. The pin serves as stop inside the coupling. The shaft is fixed in the travel-wheel system with the retaining rings. - [Bolt connecting set for travel-wheel system RB/I size 250 bolt diameter 30mm SKU: 48032184](https://maedler.in/product/bolt-connecting-set-for-travel-wheel-system-rb-i-size-250-bolt-diameter-30mm-sku-48032184/): Material: Steel Consisting of: two pins, washers and retaining rings, threaded adjusting pins and nuts for lateral alignment and fixation. Two sizes for travel-wheel system size 200 or 250. The pin connection set is used to mount the travel-wheel system into an existing hollow section when mounted from the side. One set required for each travel-wheel system. - [Horizontal guide-roller arrangement for travel-wheel system RB/I size 250 type K overall width 230mm with damper SKU: 48031084](https://maedler.in/product/horizontal-guide-roller-arrangement-for-travel-wheel-system-rb-i-size-250-type-k-overall-width-230mm-with-damper-sku-48031084/): Material: Base: steel plate, zinc plated. Damping elements: Polyamide (damping elements only for travel-wheel system with Hydropur-tyre travel wheel). Version G: for travel-wheel system with cast wheel. Without damping element. Version K: for travel-wheel system with Hydropur tyre. With damping element. Consisting of: roller bracket, bearing, damping element and mounting bolts (damping element only for version K). Two sizes for travel-wheel system size 200 or 250. The horizontal guide-roller arrangement is used for low-friction guidance and to precisely achieve individual track gauge dimensions. The guide roller is e.g. recommended for flanged wheels (version G) running on narrow tracks. The guide rollers are only used on one of the rails. - [Travel-wheel system RB/I size 250 with crane wheel case length 306mm SKU: 48030184](https://maedler.in/product/travel-wheel-system-rb-i-size-250-with-crane-wheel-case-length-306mm-sku-48030184/): Material: Housing made of spharoidal graphite cast iron, painted gray. Travel wheel made of GGG 70, with high-quality roller bearing. Version G: With cast iron travel wheel with two flanges, with high load capacity, to be used on rails. Version K: With cast iron travel wheel with PUR-bandage (Polyurethane-Elastomer), for higher traction at low oprating noise. A very robust, universal, maintenance-free travel wheel system available in two sizes. It is designed for various travel applications with wheel loads up to 3.5 t and travel speeds up to 240 m/min (depending on version and load). It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system. The five connection surfaces are machined and provide for a multitude of connection variants. 4 screws for inverted mounting are supplied. The housing is painted gray (RAL 7001) and can be repainted. The travel-wheel systems can be combined with the geared motors RBM/I to form a compact drive unit. - [Travel-wheel system RB/I size 250 with PUR-bandaged wheel case length 306mm SKU: 48030084](https://maedler.in/product/travel-wheel-system-rb-i-size-250-with-pur-bandaged-wheel-case-length-306mm-sku-48030084/): Material: Housing made of spharoidal graphite cast iron, painted gray. Travel wheel made of GGG 70, with high-quality roller bearing. Version G: With cast iron travel wheel with two flanges, with high load capacity, to be used on rails. Version K: With cast iron travel wheel with PUR-bandage (Polyurethane-Elastomer), for higher traction at low oprating noise. A very robust, universal, maintenance-free travel wheel system available in two sizes. It is designed for various travel applications with wheel loads up to 3.5 t and travel speeds up to 240 m/min (depending on version and load). It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system. The five connection surfaces are machined and provide for a multitude of connection variants. 4 screws for inverted mounting are supplied. The housing is painted gray (RAL 7001) and can be repainted. The travel-wheel systems can be combined with the geared motors RBM/I to form a compact drive unit. - [Central drive system for travel-wheel system RB/I size 200 up to distance 2900mm diameter 35mm length approx. 2515mm SKU: 48025784](https://maedler.in/product/central-drive-system-for-travel-wheel-system-rb-i-size-200-up-to-distance-2900mm-diameter-35mm-length-approx-2515mm-sku-48025784/): Material: Splined shaft, coupling, washers and rings made of steel, shaft protection made of plastic. Two sizes available suiting travel-wheel system 200 and 250. Two length for gauges up to 1500 mm or up to 2900 mm. Consisting of: Splined shaft, coupling with pin, shaft protection, washers and retaining rings. The central-drive set serves to combine two travel-wheel sets RB/I with a geared motor RBM/I to make up a central drive. To achieve this, the shaft is shortened to the required length on the coupling side, then the shaft protection cap is taken off the geared motor and the shafts are connected using the rigid coupling. The pin serves as stop inside the coupling. The shaft is fixed in the travel-wheel system with the retaining rings. - [Central drive system for travel-wheel system RB/I size 200 up to distance 1500mm diameter 35mm length approx. 1115mm SKU: 48025684](https://maedler.in/product/central-drive-system-for-travel-wheel-system-rb-i-size-200-up-to-distance-1500mm-diameter-35mm-length-approx-1115mm-sku-48025684/): Material: Splined shaft, coupling, washers and rings made of steel, shaft protection made of plastic. Two sizes available suiting travel-wheel system 200 and 250. Two length for gauges up to 1500 mm or up to 2900 mm. Consisting of: Splined shaft, coupling with pin, shaft protection, washers and retaining rings. The central-drive set serves to combine two travel-wheel sets RB/I with a geared motor RBM/I to make up a central drive. To achieve this, the shaft is shortened to the required length on the coupling side, then the shaft protection cap is taken off the geared motor and the shafts are connected using the rigid coupling. The pin serves as stop inside the coupling. The shaft is fixed in the travel-wheel system with the retaining rings. - [Bolt connecting set for travel-wheel system RB/I size 200 bolt diameter 21mm SKU: 48022184](https://maedler.in/product/bolt-connecting-set-for-travel-wheel-system-rb-i-size-200-bolt-diameter-21mm-sku-48022184/): Material: Steel Consisting of: two pins, washers and retaining rings, threaded adjusting pins and nuts for lateral alignment and fixation. Two sizes for travel-wheel system size 200 or 250. The pin connection set is used to mount the travel-wheel system into an existing hollow section when mounted from the side. One set required for each travel-wheel system. - [Horizontal guide-roller arrangement for travel-wheel system RB/I size 200 type K overall width 192mm with damper SKU: 48021084](https://maedler.in/product/horizontal-guide-roller-arrangement-for-travel-wheel-system-rb-i-size-200-type-k-overall-width-192mm-with-damper-sku-48021084/): Material: Base: steel plate, zinc plated. Damping elements: Polyamide (damping elements only for travel-wheel system with Hydropur-tyre travel wheel). Version G: for travel-wheel system with cast wheel. Without damping element. Version K: for travel-wheel system with Hydropur tyre. With damping element. Consisting of: roller bracket, bearing, damping element and mounting bolts (damping element only for version K). Two sizes for travel-wheel system size 200 or 250. The horizontal guide-roller arrangement is used for low-friction guidance and to precisely achieve individual track gauge dimensions. The guide roller is e.g. recommended for flanged wheels (version G) running on narrow tracks. The guide rollers are only used on one of the rails. - [Horizontal guide-roller arrangement for travel-wheel system RB/I size 200 type G overall width 192mm without damper SKU: 48021044](https://maedler.in/product/horizontal-guide-roller-arrangement-for-travel-wheel-system-rb-i-size-200-type-g-overall-width-192mm-without-damper-sku-48021044/): Material: Base: steel plate, zinc plated. Damping elements: Polyamide (damping elements only for travel-wheel system with Hydropur-tyre travel wheel). Version G: for travel-wheel system with cast wheel. Without damping element. Version K: for travel-wheel system with Hydropur tyre. With damping element. Consisting of: roller bracket, bearing, damping element and mounting bolts (damping element only for version K). Two sizes for travel-wheel system size 200 or 250. The horizontal guide-roller arrangement is used for low-friction guidance and to precisely achieve individual track gauge dimensions. The guide roller is e.g. recommended for flanged wheels (version G) running on narrow tracks. The guide rollers are only used on one of the rails. - [Travel-wheel system RB/I size 200 with crane wheel case length 250mm SKU: 48020184](https://maedler.in/product/travel-wheel-system-rb-i-size-200-with-crane-wheel-case-length-250mm-sku-48020184/): Material: Housing made of spharoidal graphite cast iron, painted gray. Travel wheel made of GGG 70, with high-quality roller bearing. Version G: With cast iron travel wheel with two flanges, with high load capacity, to be used on rails. Version K: With cast iron travel wheel with PUR-bandage (Polyurethane-Elastomer), for higher traction at low oprating noise. A very robust, universal, maintenance-free travel wheel system available in two sizes. It is designed for various travel applications with wheel loads up to 3.5 t and travel speeds up to 240 m/min (depending on version and load). It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system. The five connection surfaces are machined and provide for a multitude of connection variants. 4 screws for inverted mounting are supplied. The housing is painted gray (RAL 7001) and can be repainted. The travel-wheel systems can be combined with the geared motors RBM/I to form a compact drive unit. - [Travel-wheel system RB/I size 200 with PUR-bandaged wheel case length 250mm SKU: 48020084](https://maedler.in/product/travel-wheel-system-rb-i-size-200-with-pur-bandaged-wheel-case-length-250mm-sku-48020084/): Material: Housing made of spharoidal graphite cast iron, painted gray. Travel wheel made of GGG 70, with high-quality roller bearing. Version G: With cast iron travel wheel with two flanges, with high load capacity, to be used on rails. Version K: With cast iron travel wheel with PUR-bandage (Polyurethane-Elastomer), for higher traction at low oprating noise. A very robust, universal, maintenance-free travel wheel system available in two sizes. It is designed for various travel applications with wheel loads up to 3.5 t and travel speeds up to 240 m/min (depending on version and load). It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system. The five connection surfaces are machined and provide for a multitude of connection variants. 4 screws for inverted mounting are supplied. The housing is painted gray (RAL 7001) and can be repainted. The travel-wheel systems can be combined with the geared motors RBM/I to form a compact drive unit. - [Actuator MM 128 speed 17.5 mm/sec stroke 500 mm 3x 400V AC 50Hz SKU: 47542809](https://maedler.in/product/actuator-mm-128-speed-17-5-mm-sec-stroke-500-mm-3x-400v-ac-50hz-sku-47542809/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 17.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47542808](https://maedler.in/product/actuator-mm-128-speed-17-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47542808/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 17.5 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47542807](https://maedler.in/product/actuator-mm-128-speed-17-5-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47542807/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 4.4 mm/sec stroke 500 mm 3x 400V AC 50Hz SKU: 47542806](https://maedler.in/product/actuator-mm-128-speed-4-4-mm-sec-stroke-500-mm-3x-400v-ac-50hz-sku-47542806/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 4.4 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47542805](https://maedler.in/product/actuator-mm-128-speed-4-4-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47542805/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 4.4 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47542804](https://maedler.in/product/actuator-mm-128-speed-4-4-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47542804/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 1.1 mm/sec stroke 500 mm 3x 400V AC 50Hz SKU: 47542803](https://maedler.in/product/actuator-mm-128-speed-1-1-mm-sec-stroke-500-mm-3x-400v-ac-50hz-sku-47542803/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 1.1 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47542802](https://maedler.in/product/actuator-mm-128-speed-1-1-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47542802/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 1.1 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47542801](https://maedler.in/product/actuator-mm-128-speed-1-1-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47542801/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 18 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47541506](https://maedler.in/product/actuator-mm-115-speed-18-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47541506/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 18 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47541505](https://maedler.in/product/actuator-mm-115-speed-18-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47541505/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 5.0 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47541504](https://maedler.in/product/actuator-mm-115-speed-5-0-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47541504/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 5.0 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47541503](https://maedler.in/product/actuator-mm-115-speed-5-0-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47541503/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 1.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47541502](https://maedler.in/product/actuator-mm-115-speed-1-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47541502/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 1.5 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47541501](https://maedler.in/product/actuator-mm-115-speed-1-5-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47541501/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 95 speed 10.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47539529](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47539529/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47539528](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47539528/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 150 mm 3x 400V AC 50Hz SKU: 47539527](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-150-mm-3x-400v-ac-50hz-sku-47539527/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47539526](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47539526/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47539525](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47539525/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 150 mm 3x 400V AC 50Hz SKU: 47539524](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-150-mm-3x-400v-ac-50hz-sku-47539524/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47539523](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47539523/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47539522](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47539522/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 150 mm 3x 400V AC 50Hz SKU: 47539521](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-150-mm-3x-400v-ac-50hz-sku-47539521/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47539509](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47539509/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47539508](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47539508/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 150 mm 1x 230V AC 50Hz SKU: 47539507](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-150-mm-1x-230v-ac-50hz-sku-47539507/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47539506](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47539506/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47539505](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47539505/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 150 mm 1x 230V AC 50Hz SKU: 47539504](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-150-mm-1x-230v-ac-50hz-sku-47539504/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47539503](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47539503/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47539502](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47539502/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 150 mm 1x 230V AC 50Hz SKU: 47539501](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-150-mm-1x-230v-ac-50hz-sku-47539501/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47538029](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47538029/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47538028](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47538028/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 100 mm 3x 400V AC 50Hz SKU: 47538027](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-100-mm-3x-400v-ac-50hz-sku-47538027/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47538026](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47538026/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47538025](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47538025/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 100 mm 3x 400V AC 50Hz SKU: 47538024](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-100-mm-3x-400v-ac-50hz-sku-47538024/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47538023](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47538023/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47538022](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47538022/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 100 mm 3x 400V AC 50Hz SKU: 47538021](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-100-mm-3x-400v-ac-50hz-sku-47538021/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47538009](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47538009/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47538008](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47538008/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47538007](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47538007/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47538006](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47538006/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47538005](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47538005/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47538004](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47538004/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47538003](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47538003/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47538002](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47538002/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47538001](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47538001/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 10 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47536029](https://maedler.in/product/actuator-mm-60-speed-10-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47536029/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 10 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47536028](https://maedler.in/product/actuator-mm-60-speed-10-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47536028/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 10 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47536027](https://maedler.in/product/actuator-mm-60-speed-10-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47536027/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 2.7 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47536026](https://maedler.in/product/actuator-mm-60-speed-2-7-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47536026/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 2.7 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47536025](https://maedler.in/product/actuator-mm-60-speed-2-7-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47536025/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 2.7 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47536024](https://maedler.in/product/actuator-mm-60-speed-2-7-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47536024/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 0.7 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47536023](https://maedler.in/product/actuator-mm-60-speed-0-7-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47536023/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 0.7 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47536022](https://maedler.in/product/actuator-mm-60-speed-0-7-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47536022/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 0.7 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47536021](https://maedler.in/product/actuator-mm-60-speed-0-7-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47536021/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 16 mm/sec stroke 300 mm 24V DC SKU: 47536009](https://maedler.in/product/actuator-mm-60-speed-16-mm-sec-stroke-300-mm-24v-dc-sku-47536009/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 16 mm/sec stroke 200 mm 24V DC SKU: 47536008](https://maedler.in/product/actuator-mm-60-speed-16-mm-sec-stroke-200-mm-24v-dc-sku-47536008/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 16 mm/sec stroke 100 mm 24V DC SKU: 47536007](https://maedler.in/product/actuator-mm-60-speed-16-mm-sec-stroke-100-mm-24v-dc-sku-47536007/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 5.5 mm/sec stroke 300 mm 24V DC SKU: 47536006](https://maedler.in/product/actuator-mm-60-speed-5-5-mm-sec-stroke-300-mm-24v-dc-sku-47536006/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 5.5 mm/sec stroke 200 mm 24V DC SKU: 47536005](https://maedler.in/product/actuator-mm-60-speed-5-5-mm-sec-stroke-200-mm-24v-dc-sku-47536005/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 5.5 mm/sec stroke 100 mm 24V DC SKU: 47536004](https://maedler.in/product/actuator-mm-60-speed-5-5-mm-sec-stroke-100-mm-24v-dc-sku-47536004/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 1.5 mm/sec stroke 300 mm 24V DC SKU: 47536003](https://maedler.in/product/actuator-mm-60-speed-1-5-mm-sec-stroke-300-mm-24v-dc-sku-47536003/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 1.5 mm/sec stroke 200 mm 24V DC SKU: 47536002](https://maedler.in/product/actuator-mm-60-speed-1-5-mm-sec-stroke-200-mm-24v-dc-sku-47536002/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 1.5 mm/sec stroke 100 mm 24V DC SKU: 47536001](https://maedler.in/product/actuator-mm-60-speed-1-5-mm-sec-stroke-100-mm-24v-dc-sku-47536001/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Trapezoidal threaded spindle Tr.10x3x383mm length for stroke 300mm for linear drive SFL SKU: 47520130](https://maedler.in/product/trapezoidal-threaded-spindle-tr-10x3x383mm-length-for-stroke-300mm-for-linear-drive-sfl-sku-47520130/): Ready-to-install spindle for 300mm stroke length. Alternatively: product no. 64001000, spindle with length one meter from steel C15, or product no. 64099010, spindle with length one meter from stainless steel, for further processing by the customer. Caution: Due to kinking, the max stroke length under compressive loads is limited to 300 mm. The spindle has to be adequately lubricated before screwing in and operating (with normal machine grease). Mounting eye and stop block are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 400N with Hall-IC SKU: 47520114](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-400n-with-hall-ic-sku-47520114/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 400(200)N with Hall-IC SKU: 47520113](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-400200n-with-hall-ic-sku-47520113/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 1200N with Hall-IC SKU: 47520112](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-1200n-with-hall-ic-sku-47520112/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 1000N with Hall-IC SKU: 47520111](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-1000n-with-hall-ic-sku-47520111/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Connecting cable with Molex plug for linear drives SFL with Hall-IC length 500mm SKU: 47520110](https://maedler.in/product/connecting-cable-with-molex-plug-for-linear-drives-sfl-with-hall-ic-length-500mm-sku-47520110/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 400N without Hall-IC SKU: 47520104](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-400n-without-hall-ic-sku-47520104/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 400(200)N without Hall-IC SKU: 47520103](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-400200n-without-hall-ic-sku-47520103/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 1200N without Hall-IC SKU: 47520102](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-1200n-without-hall-ic-sku-47520102/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 1000N without Hall-IC SKU: 47520101](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-1000n-without-hall-ic-sku-47520101/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Cable with plug with 8 pins and screen for to connect the GR/I control box with a customer´s controller cable length approx. 1.8m - extended approx. 4m ### Note: only for potentialfree contacts ### SKU: 47519205](https://maedler.in/product/cable-with-plug-with-8-pins-and-screen-for-to-connect-the-gr-i-control-box-with-a-customers-controller-cable-length-approx-1-8m-extended-approx-4m-note-only-for-potentialfree-contact/): Cable with plug with 8 pins and screen for to connect the GR/I control box with a customer´s controller (alternatively to the hand operator).Cable length approx. 1.8m - extended approx. 4m.Note: only for potentialfree contacts. - [Hand Operator GR/I for 1-4 actuators SKU: 47519204](https://maedler.in/product/hand-operator-gr-i-for-1-4-actuators-sku-47519204/): Material: housing made of shock resistant black plastic. For use with actuators and control boxes GR/I. With one hand operator, 1-4 actuators can be oprated seperately. For control boxes with 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. To operate each actuator seperately. Protection class IP54. cable length approx. 2m. Actuators, control box and hand operator have to be ordered seperately. - [Hand Operator GR/I for 1-2 actuators SKU: 47519202](https://maedler.in/product/hand-operator-gr-i-for-1-2-actuators-sku-47519202/): Material: housing made of shock resistant black plastic. For use with actuators and control boxes GR/I. With one hand operator, 1-4 actuators can be oprated seperately. For control boxes with 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. To operate each actuator seperately. Protection class IP54. cable length approx. 2m. Actuators, control box and hand operator have to be ordered seperately. - [Hand Operator GR/I for 1 actuator SKU: 47519201](https://maedler.in/product/hand-operator-gr-i-for-1-actuator-sku-47519201/): Material: housing made of shock resistant black plastic. For use with actuators and control boxes GR/I. With one hand operator, 1-4 actuators can be oprated seperately. For control boxes with 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. To operate each actuator seperately. Protection class IP54. cable length approx. 2m. Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 24V DC output 24V DC for 1-4 actuators SKU: 47519114](https://maedler.in/product/control-box-gr-i-input-24v-dc-output-24v-dc-for-1-4-actuators-sku-47519114/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 24V DC output 24V DC for 1-2 actuators SKU: 47519112](https://maedler.in/product/control-box-gr-i-input-24v-dc-output-24v-dc-for-1-2-actuators-sku-47519112/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 24V DC output 24V DC for 1 actuator SKU: 47519111](https://maedler.in/product/control-box-gr-i-input-24v-dc-output-24v-dc-for-1-actuator-sku-47519111/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 230V AC output 24V DC for 1-4 actuators with IEC power cord length 3 m SKU: 47519014](https://maedler.in/product/control-box-gr-i-input-230v-ac-output-24v-dc-for-1-4-actuators-with-iec-power-cord-length-3-m-sku-47519014/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582338](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582335](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582332](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582330](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582328](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582325](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582324](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582324/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582322](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582322/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582320](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582320/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582319](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582319/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582238](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582235](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582232](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582230](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582228](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582225](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582224](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582224/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582222](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582222/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582220](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582220/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582219](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582219/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582218](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582218/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582216](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582216/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582138](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582135](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582132](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582130](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582125](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582122](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582122/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582120](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582120/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582119](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582119/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582118](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582118/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582116](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582116/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582038](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582035](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582032](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582030](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582028](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582028/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582025](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582024](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582024/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582022](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582022/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582020](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582020/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582019](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582019/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582018](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582018/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582016](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582016/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581938](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581935](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581935/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581932](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581932/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581930](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581930/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581928](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581928/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581925](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581925/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581924](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581924/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581922](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581922/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581920](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581920/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581919](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581919/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581918](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581918/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581916](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581916/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581838](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581838/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581835](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581835/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581832](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581832/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581830](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581830/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581828](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581828/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581825](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581825/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581824](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581824/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581822](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581822/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581820](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581820/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581819](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581819/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581818](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581818/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581816](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581816/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581732](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581732/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581730](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581730/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581728](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581728/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581725](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581725/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581724](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581724/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581722](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581722/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581720](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581720/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581719](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581719/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581718](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581718/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581716](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581716/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581715](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581715/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581632](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581632/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581630](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581630/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581628](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581628/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581625](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581625/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581624](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581624/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581622](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581622/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581620](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581620/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581619](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581619/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581618](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581618/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581616](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581616/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581615](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581615/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581532](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581530](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581528](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581525](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581524](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581524/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581522](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581522/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581520](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581519](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581518](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581516](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm shielded on both sides clearance C3 SKU: 6001-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-shielded-on-both-sides-clearance-c3-sku-6001-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm open (unsealed) SKU: 6001-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-open-unsealed-sku-6001-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm open (unsealed) clearance C3 SKU: 6001-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-open-unsealed-clearance-c3-sku-6001-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Clamp coupling (boc coupling) DIN 115 both sides bore 90mm with keyway material cast iron SKU: 60009000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-90mm-with-keyway-material-cast-iron-sku-60009000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 80mm with keyway material cast iron SKU: 60008000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-80mm-with-keyway-material-cast-iron-sku-60008000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 70mm with keyway material cast iron SKU: 60007000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-70mm-with-keyway-material-cast-iron-sku-60007000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 65mm with keyway material cast iron SKU: 60006500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-65mm-with-keyway-material-cast-iron-sku-60006500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 60mm with keyway material cast iron SKU: 60006000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-60mm-with-keyway-material-cast-iron-sku-60006000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 55mm with keyway material cast iron SKU: 60005500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-55mm-with-keyway-material-cast-iron-sku-60005500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 50mm with keyway material cast iron SKU: 60005000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-50mm-with-keyway-material-cast-iron-sku-60005000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 45mm with keyway material cast iron SKU: 60004500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-45mm-with-keyway-material-cast-iron-sku-60004500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 40mm with keyway material cast iron SKU: 60004000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-40mm-with-keyway-material-cast-iron-sku-60004000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 35mm with keyway material cast iron SKU: 60003500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-35mm-with-keyway-material-cast-iron-sku-60003500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 30mm with keyway material cast iron SKU: 60003000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-30mm-with-keyway-material-cast-iron-sku-60003000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 25mm with keyway material cast iron SKU: 60002500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-25mm-with-keyway-material-cast-iron-sku-60002500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 20mm with keyway material cast iron SKU: 60002000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-20mm-with-keyway-material-cast-iron-sku-60002000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm shielded on both sides SKU: 6000-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-sku-6000-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm shielded on both sides clearance C3 SKU: 6000-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-clearance-c3-sku-6000-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm sealed on both sides SKU: 6000-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-sku-6000-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm sealed on both sides SKU: 6000-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-sku-6000-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm sealed on both sides clearance C3 SKU: 6000-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-clearance-c3-sku-6000-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm sealed on both sides clearance C3 SKU: 6000-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-clearance-c3-sku-6000-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm shielded on both sides SKU: 6000-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-sku-6000-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm shielded on both sides clearance C3 SKU: 6000-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-clearance-c3-sku-6000-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm open (unsealed) SKU: 6000-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-open-unsealed-sku-6000-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm open (unsealed) clearance C3 SKU: 6000-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-open-unsealed-clearance-c3-sku-6000-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF single direction thrust ball bearing 51206 inner Ø 30mm outer Ø 52mm height 16mm SKU: 51206-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51206-inner-o-30mm-outer-o-52mm-height-16mm-sku-51206-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51206 inner Ø 30mm outer Ø 52mm height 16mm SKU: 51206-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51206-inner-o-30mm-outer-o-52mm-height-16mm-sku-51206-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51205 inner Ø 25mm outer Ø 47mm height 15mm SKU: 51205-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51205-inner-o-25mm-outer-o-47mm-height-15mm-sku-51205-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51205 inner Ø 25mm outer Ø 47mm height 15mm SKU: 51205-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51205-inner-o-25mm-outer-o-47mm-height-15mm-sku-51205-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51204 inner Ø 20mm outer Ø 40mm height 14mm SKU: 51204-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51204-inner-o-20mm-outer-o-40mm-height-14mm-sku-51204-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51204 inner Ø 20mm outer Ø 40mm height 14mm SKU: 51204-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51204-inner-o-20mm-outer-o-40mm-height-14mm-sku-51204-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51203 inner Ø 17mm outer Ø 35mm height 12mm SKU: 51203-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51203-inner-o-17mm-outer-o-35mm-height-12mm-sku-51203-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51203 inner Ø 17mm outer Ø 35mm height 12mm SKU: 51203-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51203-inner-o-17mm-outer-o-35mm-height-12mm-sku-51203-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51202 inner Ø 15mm outer Ø 32mm height 12mm SKU: 51202-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51202-inner-o-15mm-outer-o-32mm-height-12mm-sku-51202-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51202 inner Ø 15mm outer Ø 32mm height 12mm SKU: 51202-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51202-inner-o-15mm-outer-o-32mm-height-12mm-sku-51202-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51201 inner Ø 12mm outer Ø 28mm height 11mm SKU: 51201-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51201-inner-o-12mm-outer-o-28mm-height-11mm-sku-51201-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51201 inner Ø 12mm outer Ø 28mm height 11mm SKU: 51201-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51201-inner-o-12mm-outer-o-28mm-height-11mm-sku-51201-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51200 inner Ø 10mm outer Ø 26mm height 11mm SKU: 51200-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51200-inner-o-10mm-outer-o-26mm-height-11mm-sku-51200-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51200 inner Ø 10mm outer Ø 26mm height 11mm SKU: 51200-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51200-inner-o-10mm-outer-o-26mm-height-11mm-sku-51200-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51120 inner Ø 100mm outer Ø 135mm height 25mm SKU: 51120-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51120-inner-o-100mm-outer-o-135mm-height-25mm-sku-51120-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51120 inner Ø 100mm outer Ø 135mm height 25mm SKU: 51120-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51120-inner-o-100mm-outer-o-135mm-height-25mm-sku-51120-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51118 inner Ø 90mm outer Ø 120mm height 22mm SKU: 51118-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51118-inner-o-90mm-outer-o-120mm-height-22mm-sku-51118-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51118 inner Ø 90mm outer Ø 120mm height 22mm SKU: 51118-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51118-inner-o-90mm-outer-o-120mm-height-22mm-sku-51118-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51117 inner Ø 85mm outer Ø 110mm height 19mm SKU: 51117-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51117-inner-o-85mm-outer-o-110mm-height-19mm-sku-51117-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51117 inner Ø 85mm outer Ø 110mm height 19mm SKU: 51117-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51117-inner-o-85mm-outer-o-110mm-height-19mm-sku-51117-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51116 inner Ø 80mm outer Ø 105mm height 19mm SKU: 51116-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51116-inner-o-80mm-outer-o-105mm-height-19mm-sku-51116-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51116 inner Ø 80mm outer Ø 105mm height 19mm SKU: 51116-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51116-inner-o-80mm-outer-o-105mm-height-19mm-sku-51116-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51115 inner Ø 75mm outer Ø 100mm height 19mm SKU: 51115-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51115-inner-o-75mm-outer-o-100mm-height-19mm-sku-51115-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51115 inner Ø 75mm outer Ø 100mm height 19mm SKU: 51115-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51115-inner-o-75mm-outer-o-100mm-height-19mm-sku-51115-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51114 inner Ø 70mm outer Ø 95mm height 18mm SKU: 51114-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51114-inner-o-70mm-outer-o-95mm-height-18mm-sku-51114-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51114 inner Ø 70mm outer Ø 95mm height 18mm SKU: 51114-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51114-inner-o-70mm-outer-o-95mm-height-18mm-sku-51114-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51113 inner Ø 65mm outer Ø 90mm height 18mm SKU: 51113-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51113-inner-o-65mm-outer-o-90mm-height-18mm-sku-51113-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51113 inner Ø 65mm outer Ø 90mm height 18mm SKU: 51113-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51113-inner-o-65mm-outer-o-90mm-height-18mm-sku-51113-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51112 inner Ø 60mm outer Ø 85mm height 17mm SKU: 51112-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51112-inner-o-60mm-outer-o-85mm-height-17mm-sku-51112-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51112 inner Ø 60mm outer Ø 85mm height 17mm SKU: 51112-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51112-inner-o-60mm-outer-o-85mm-height-17mm-sku-51112-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51111 inner Ø 55mm outer Ø 78mm height 16mm SKU: 51111-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51111-inner-o-55mm-outer-o-78mm-height-16mm-sku-51111-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51111 inner Ø 55mm outer Ø 78mm height 16mm SKU: 51111-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51111-inner-o-55mm-outer-o-78mm-height-16mm-sku-51111-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51110 inner Ø 50mm outer Ø 70mm height 14mm SKU: 51110-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51110-inner-o-50mm-outer-o-70mm-height-14mm-sku-51110-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51110 inner Ø 50mm outer Ø 70mm height 14mm SKU: 51110-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51110-inner-o-50mm-outer-o-70mm-height-14mm-sku-51110-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51109 inner Ø 45mm outer Ø 65mm height 14mm SKU: 51109-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51109-inner-o-45mm-outer-o-65mm-height-14mm-sku-51109-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51109 inner Ø 45mm outer Ø 65mm height 14mm SKU: 51109-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51109-inner-o-45mm-outer-o-65mm-height-14mm-sku-51109-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51108 inner Ø 40mm outer Ø 60mm height 13mm SKU: 51108-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51108-inner-o-40mm-outer-o-60mm-height-13mm-sku-51108-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51108 inner Ø 40mm outer Ø 60mm height 13mm SKU: 51108-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51108-inner-o-40mm-outer-o-60mm-height-13mm-sku-51108-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51107 inner Ø 35mm outer Ø 52mm height 12mm SKU: 51107-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51107-inner-o-35mm-outer-o-52mm-height-12mm-sku-51107-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51107 inner Ø 35mm outer Ø 52mm height 12mm SKU: 51107-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51107-inner-o-35mm-outer-o-52mm-height-12mm-sku-51107-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51106 inner Ø 30mm outer Ø 47mm height 11mm SKU: 51106-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51106-inner-o-30mm-outer-o-47mm-height-11mm-sku-51106-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51106 inner Ø 30mm outer Ø 47mm height 11mm SKU: 51106-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51106-inner-o-30mm-outer-o-47mm-height-11mm-sku-51106-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51105 inner Ø 25mm outer Ø 42mm height 11mm SKU: 51105-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51105-inner-o-25mm-outer-o-42mm-height-11mm-sku-51105-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51105 inner Ø 25mm outer Ø 42mm height 11mm SKU: 51105-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51105-inner-o-25mm-outer-o-42mm-height-11mm-sku-51105-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51104 inner Ø 20mm outer Ø 35mm height 10mm SKU: 51104-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51104-inner-o-20mm-outer-o-35mm-height-10mm-sku-51104-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51104 inner Ø 20mm outer Ø 35mm height 10mm SKU: 51104-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51104-inner-o-20mm-outer-o-35mm-height-10mm-sku-51104-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51103 inner Ø 17mm outer Ø 30mm height 9mm SKU: 51103-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51103-inner-o-17mm-outer-o-30mm-height-9mm-sku-51103-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51103 inner Ø 17mm outer Ø 30mm height 9mm SKU: 51103-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51103-inner-o-17mm-outer-o-30mm-height-9mm-sku-51103-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51102 inner Ø 15mm outer Ø 28mm height 9mm SKU: 51102-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51102-inner-o-15mm-outer-o-28mm-height-9mm-sku-51102-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51102 inner Ø 15mm outer Ø 28mm height 9mm SKU: 51102-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51102-inner-o-15mm-outer-o-28mm-height-9mm-sku-51102-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51101 inner Ø 12mm outer Ø 26mm height 9mm SKU: 51101-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51101-inner-o-12mm-outer-o-26mm-height-9mm-sku-51101-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51101 inner Ø 12mm outer Ø 26mm height 9mm SKU: 51101-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51101-inner-o-12mm-outer-o-26mm-height-9mm-sku-51101-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51100 inner Ø 10mm outer Ø 24mm height 9mm SKU: 51100-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51100-inner-o-10mm-outer-o-24mm-height-9mm-sku-51100-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51100 inner Ø 10mm outer Ø 24mm height 9mm SKU: 51100-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51100-inner-o-10mm-outer-o-24mm-height-9mm-sku-51100-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 90B8/2 400V 50Hz shaft diameter 45mm i=55.7:1 SKU: 48324446](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-90b8-2-400v-50hz-shaft-diameter-45mm-i55-71-sku-48324446/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 80A8/2 400V 50Hz shaft diameter 45mm i=55.7:1 SKU: 48324346](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-80a8-2-400v-50hz-shaft-diameter-45mm-i55-71-sku-48324346/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 71A8/2 400V 50Hz shaft diameter 45mm i=166:1 SKU: 48324246](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-71a8-2-400v-50hz-shaft-diameter-45mm-i1661-sku-48324246/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 63A8/2 400V 50Hz shaft diameter 45mm i=156:1 SKU: 48324146](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-63a8-2-400v-50hz-shaft-diameter-45mm-i1561-sku-48324146/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 100A8/2 400V 50Hz shaft diameter 45mm i=25.3:1 SKU: 48323546](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-100a8-2-400v-50hz-shaft-diameter-45mm-i25-31-sku-48323546/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 100A8/2 400V 50Hz shaft diameter 45mm i=49:1 SKU: 48323446](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-100a8-2-400v-50hz-shaft-diameter-45mm-i491-sku-48323446/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 90B8/2 400V 50Hz shaft diameter 45mm i=48.3:1 SKU: 48323346](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-90b8-2-400v-50hz-shaft-diameter-45mm-i48-31-sku-48323346/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 71A8/2 400V 50Hz shaft diameter 45mm i=166:1 SKU: 48323246](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-71a8-2-400v-50hz-shaft-diameter-45mm-i1661-sku-48323246/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 63A8/2 400V 50Hz shaft diameter 45mm i=156:1 SKU: 48323146](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-63a8-2-400v-50hz-shaft-diameter-45mm-i1561-sku-48323146/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 90B8/2 400V 50Hz shaft diameter 35mm i=23:1 SKU: 48222446](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-90b8-2-400v-50hz-shaft-diameter-35mm-i231-sku-48222446/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 90B8/2 400V 50Hz shaft diameter 35mm i=45.5:1 SKU: 48222346](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-90b8-2-400v-50hz-shaft-diameter-35mm-i45-51-sku-48222346/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 71A8/2 400V 50Hz shaft diameter 35mm i=44.1:1 SKU: 48222246](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-71a8-2-400v-50hz-shaft-diameter-35mm-i44-11-sku-48222246/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 63A8/2 400V 50Hz shaft diameter 35mm i=135:1 SKU: 48222146](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-63a8-2-400v-50hz-shaft-diameter-35mm-i1351-sku-48222146/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 100A8/2 400V 50Hz shaft diameter 35mm i=19.9:1 SKU: 48221546](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-100a8-2-400v-50hz-shaft-diameter-35mm-i19-91-sku-48221546/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 90A8/2 400V 50Hz shaft diameter 35mm i=39.4:1 SKU: 48221446](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-90a8-2-400v-50hz-shaft-diameter-35mm-i39-41-sku-48221446/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 80A8/2 400V 50Hz shaft diameter 35mm i=39.9:1 SKU: 48221346](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-80a8-2-400v-50hz-shaft-diameter-35mm-i39-91-sku-48221346/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 71A8/2 400V 50Hz shaft diameter 35mm i=126:1 SKU: 48221246](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-71a8-2-400v-50hz-shaft-diameter-35mm-i1261-sku-48221246/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 63A8/2 400V 50Hz shaft diameter 35mm i=123:1 SKU: 48221146](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-63a8-2-400v-50hz-shaft-diameter-35mm-i1231-sku-48221146/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Buffer set for travel-wheel system RB/I diameter 95mm length 100mm SKU: 48071084](https://maedler.in/product/buffer-set-for-travel-wheel-system-rb-i-diameter-95mm-length-100mm-sku-48071084/): Material: Polyurethane cellular foam, spacers made of plastic, black. Consisting of: one buffer, threaded pin M12 x 55 mm, two spacers 12,5 mm (for mounting without guide roller) and one spacer 25 mm (for mounting with guide roller, using the supplied nuts M12). The required thread has already been machined on both face ends of the travel-wheel system. The srew-on buffer fits both travel-wheel-system sizes 200 and 250. Temperature range: -20°C to +60°C. Weight: 0,8 kg. - [Horizontal guide-roller arrangement for travel-wheel system RB/I size 250 type G overall width 230mm without damper SKU: 48051044](https://maedler.in/product/horizontal-guide-roller-arrangement-for-travel-wheel-system-rb-i-size-250-type-g-overall-width-230mm-without-damper-sku-48051044/): Material: Base: steel plate, zinc plated. Damping elements: Polyamide (damping elements only for travel-wheel system with Hydropur-tyre travel wheel). Version G: for travel-wheel system with cast wheel. Without damping element. Version K: for travel-wheel system with Hydropur tyre. With damping element. Consisting of: roller bracket, bearing, damping element and mounting bolts (damping element only for version K). Two sizes for travel-wheel system size 200 or 250. The horizontal guide-roller arrangement is used for low-friction guidance and to precisely achieve individual track gauge dimensions. The guide roller is e.g. recommended for flanged wheels (version G) running on narrow tracks. The guide rollers are only used on one of the rails. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 35 teeth material steel SKU: 10613500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-35-teeth-material-steel-sku-10613500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 34 teeth material steel SKU: 10613400](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-34-teeth-material-steel-sku-10613400/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 32 teeth material steel SKU: 10613200](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-32-teeth-material-steel-sku-10613200/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 30 teeth material steel SKU: 10613000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-30-teeth-material-steel-sku-10613000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 28 teeth material steel SKU: 10612800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-28-teeth-material-steel-sku-10612800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 27 teeth material steel SKU: 10612700](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-27-teeth-material-steel-sku-10612700/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 26 teeth material steel SKU: 10612600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-26-teeth-material-steel-sku-10612600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 25 teeth material steel SKU: 10612500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-25-teeth-material-steel-sku-10612500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 24 teeth material steel SKU: 10612400](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-24-teeth-material-steel-sku-10612400/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 23 teeth material steel SKU: 10612300](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-23-teeth-material-steel-sku-10612300/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 22 teeth material steel SKU: 10612200](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-22-teeth-material-steel-sku-10612200/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 21 teeth material steel SKU: 10612100](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-21-teeth-material-steel-sku-10612100/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 20 teeth material steel SKU: 10612000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-20-teeth-material-steel-sku-10612000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 19 teeth material steel SKU: 10611900](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-19-teeth-material-steel-sku-10611900/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 18 teeth material steel SKU: 10611800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-18-teeth-material-steel-sku-10611800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 17 teeth material steel SKU: 10611700](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-17-teeth-material-steel-sku-10611700/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 16 teeth material steel SKU: 10611600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-16-teeth-material-steel-sku-10611600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 15 teeth material steel SKU: 10611500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-15-teeth-material-steel-sku-10611500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 14 teeth material steel SKU: 10611400](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-14-teeth-material-steel-sku-10611400/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 13 teeth material steel SKU: 10611300](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-13-teeth-material-steel-sku-10611300/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 12 teeth material steel SKU: 10611200](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-12-teeth-material-steel-sku-10611200/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 11 teeth material steel SKU: 10611100](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-11-teeth-material-steel-sku-10611100/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 10 teeth material steel SKU: 10611000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-10-teeth-material-steel-sku-10611000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 9 teeth material steel SKU: 10610900](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-9-teeth-material-steel-sku-10610900/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 8 teeth material steel SKU: 10610800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-8-teeth-material-steel-sku-10610800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 40 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599140](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-40-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599140/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 38 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599138](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-38-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599138/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 35 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599135](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-35-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599135/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 32 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599132](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-32-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599132/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599130](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 26 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599126](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-26-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599126/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599125](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599124](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599123](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599122](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599121](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599120](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599119](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599118](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599117](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599116](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599115](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599114](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599113](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599112](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 40 teeth material steel teeth induction hardened SKU: 10588140](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-40-teeth-material-steel-teeth-induction-hardened-sku-10588140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 38 teeth material steel teeth induction hardened SKU: 10588138](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-38-teeth-material-steel-teeth-induction-hardened-sku-10588138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 36 teeth material steel teeth induction hardened SKU: 10588136](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-36-teeth-material-steel-teeth-induction-hardened-sku-10588136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 35 teeth material steel teeth induction hardened SKU: 10588135](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-35-teeth-material-steel-teeth-induction-hardened-sku-10588135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 34 teeth material steel teeth induction hardened SKU: 10588134](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-34-teeth-material-steel-teeth-induction-hardened-sku-10588134/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 32 teeth material steel teeth induction hardened SKU: 10588132](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-32-teeth-material-steel-teeth-induction-hardened-sku-10588132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 30 teeth material steel teeth induction hardened SKU: 10588130](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-30-teeth-material-steel-teeth-induction-hardened-sku-10588130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 29 teeth material steel teeth induction hardened SKU: 10588129](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-29-teeth-material-steel-teeth-induction-hardened-sku-10588129/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 28 teeth material steel teeth induction hardened SKU: 10588128](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-28-teeth-material-steel-teeth-induction-hardened-sku-10588128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 27 teeth material steel teeth induction hardened SKU: 10588127](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-27-teeth-material-steel-teeth-induction-hardened-sku-10588127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 26 teeth material steel teeth induction hardened SKU: 10588126](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-26-teeth-material-steel-teeth-induction-hardened-sku-10588126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 25 teeth material steel teeth induction hardened SKU: 10588125](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-25-teeth-material-steel-teeth-induction-hardened-sku-10588125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 24 teeth material steel teeth induction hardened SKU: 10588124](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-24-teeth-material-steel-teeth-induction-hardened-sku-10588124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 23 teeth material steel teeth induction hardened SKU: 10588123](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-23-teeth-material-steel-teeth-induction-hardened-sku-10588123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 22 teeth material steel teeth induction hardened SKU: 10588122](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-22-teeth-material-steel-teeth-induction-hardened-sku-10588122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 21 teeth material steel teeth induction hardened SKU: 10588121](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-21-teeth-material-steel-teeth-induction-hardened-sku-10588121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 20 teeth material steel teeth induction hardened SKU: 10588120](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-20-teeth-material-steel-teeth-induction-hardened-sku-10588120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 19 teeth material steel teeth induction hardened SKU: 10588119](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-19-teeth-material-steel-teeth-induction-hardened-sku-10588119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 18 teeth material steel teeth induction hardened SKU: 10588118](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-18-teeth-material-steel-teeth-induction-hardened-sku-10588118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 17 teeth material steel teeth induction hardened SKU: 10588117](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-17-teeth-material-steel-teeth-induction-hardened-sku-10588117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 16 teeth material steel teeth induction hardened SKU: 10588116](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-16-teeth-material-steel-teeth-induction-hardened-sku-10588116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 15 teeth material steel teeth induction hardened SKU: 10588115](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-15-teeth-material-steel-teeth-induction-hardened-sku-10588115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 14 teeth material steel teeth induction hardened SKU: 10588114](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-14-teeth-material-steel-teeth-induction-hardened-sku-10588114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 13 teeth material steel teeth induction hardened SKU: 10588113](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-13-teeth-material-steel-teeth-induction-hardened-sku-10588113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 12 teeth material steel teeth induction hardened SKU: 10588112](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-12-teeth-material-steel-teeth-induction-hardened-sku-10588112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 11 teeth material steel teeth induction hardened SKU: 10588111](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-11-teeth-material-steel-teeth-induction-hardened-sku-10588111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 10 teeth material steel teeth induction hardened SKU: 10588110](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-10-teeth-material-steel-teeth-induction-hardened-sku-10588110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 9 teeth material steel teeth induction hardened SKU: 10588109](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-9-teeth-material-steel-teeth-induction-hardened-sku-10588109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 8 teeth material steel teeth induction hardened SKU: 10588108](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-8-teeth-material-steel-teeth-induction-hardened-sku-10588108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583038](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583035](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583032](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583030](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583028](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583028/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583025](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582538](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582535](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582532](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582530](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582528](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582525](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582524](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582524/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582522](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582522/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582520](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582519](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582438](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582435](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582432](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582430](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582430/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582428](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582425](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582424](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582424/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582422](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582422/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582420](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582420/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582419](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582419/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm open (unsealed) clearance C3 SKU: 6007-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-open-unsealed-clearance-c3-sku-6007-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [One-piece clamp coupling MAS both sides bore 50mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60065000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-50mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60065000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 40mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60064000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-40mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60064000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 35mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60063500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-35mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60063500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 30mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60063000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-30mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60063000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 25mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60062500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-25mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60062500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 20mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60062000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-20mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60062000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm shielded on both sides SKU: 6006-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-shielded-on-both-sides-sku-6006-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm shielded on both sides clearance C3 SKU: 6006-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-shielded-on-both-sides-clearance-c3-sku-6006-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm sealed on both sides SKU: 6006-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-sealed-on-both-sides-sku-6006-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm sealed on both sides clearance C3 SKU: 6006-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-sealed-on-both-sides-clearance-c3-sku-6006-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm sealed on both sides SKU: 6006-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-sealed-on-both-sides-sku-6006-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [One-piece clamp coupling MAS both sides bore 19mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061900](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-19mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061900/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 16mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061600](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-16mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061600/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 15mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-15mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 14mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061400](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-14mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061400/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 12mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061200](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-12mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061200/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 10mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-10mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 8mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060800](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-8mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060800/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 6mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060600](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-6mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060600/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 5mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-5mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 4mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060400](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-4mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060400/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 3mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060300](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-3mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060300/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm shielded on both sides SKU: 6006-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-shielded-on-both-sides-sku-6006-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm open (unsealed) SKU: 6006-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-open-unsealed-sku-6006-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm open (unsealed) clearance C3 SKU: 6006-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-open-unsealed-clearance-c3-sku-6006-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm shielded on both sides SKU: 6005-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-shielded-on-both-sides-sku-6005-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm shielded on both sides clearance C3 SKU: 6005-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6005-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm sealed on both sides SKU: 6005-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-sealed-on-both-sides-sku-6005-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm sealed on both sides SKU: 6005-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-sealed-on-both-sides-sku-6005-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm sealed on both sides clearance C3 SKU: 6005-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6005-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm sealed on both sides clearance C3 SKU: 6005-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6005-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm shielded on both sides SKU: 6005-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-shielded-on-both-sides-sku-6005-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm shielded on both sides clearance C3 SKU: 6005-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6005-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm open (unsealed) SKU: 6005-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-open-unsealed-sku-6005-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm open (unsealed) clearance C3 SKU: 6005-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-open-unsealed-clearance-c3-sku-6005-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm shielded on both sides SKU: 6004-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-shielded-on-both-sides-sku-6004-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm shielded on both sides clearance C3 SKU: 6004-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6004-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm sealed on both sides SKU: 6004-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-sealed-on-both-sides-sku-6004-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm sealed on both sides SKU: 6004-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-sealed-on-both-sides-sku-6004-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm sealed on both sides clearance C3 SKU: 6004-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6004-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm sealed on both sides clearance C3 SKU: 6004-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6004-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm shielded on both sides SKU: 6004-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-shielded-on-both-sides-sku-6004-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm shielded on both sides clearance C3 SKU: 6004-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6004-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm open (unsealed) SKU: 6004-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-open-unsealed-sku-6004-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm open (unsealed) clearance C3 SKU: 6004-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-open-unsealed-clearance-c3-sku-6004-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm shielded on both sides SKU: 6003-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-shielded-on-both-sides-sku-6003-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm shielded on both sides clearance C3 SKU: 6003-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-shielded-on-both-sides-clearance-c3-sku-6003-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm sealed on both sides SKU: 6003-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-sealed-on-both-sides-sku-6003-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm sealed on both sides SKU: 6003-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-sealed-on-both-sides-sku-6003-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm sealed on both sides clearance C3 SKU: 6003-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-sealed-on-both-sides-clearance-c3-sku-6003-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm sealed on both sides clearance C3 SKU: 6003-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-sealed-on-both-sides-clearance-c3-sku-6003-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm shielded on both sides SKU: 6003-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-shielded-on-both-sides-sku-6003-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm shielded on both sides clearance C3 SKU: 6003-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-shielded-on-both-sides-clearance-c3-sku-6003-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm open (unsealed) SKU: 6003-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-open-unsealed-sku-6003-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm open (unsealed) clearance C3 SKU: 6003-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-open-unsealed-clearance-c3-sku-6003-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Set-screw coupling TR steel C45 black oxide finished bore 50mm with keyway SKU: 60025000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-50mm-with-keyway-sku-60025000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 40mm with keyway SKU: 60024000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-40mm-with-keyway-sku-60024000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 35mm with keyway SKU: 60023500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-35mm-with-keyway-sku-60023500/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 30mm with keyway SKU: 60023000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-30mm-with-keyway-sku-60023000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 25mm with keyway SKU: 60022500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-25mm-with-keyway-sku-60022500/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 20mm with keyway SKU: 60022000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-20mm-with-keyway-sku-60022000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm shielded on both sides SKU: 6002-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-shielded-on-both-sides-sku-6002-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm shielded on both sides clearance C3 SKU: 6002-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-shielded-on-both-sides-clearance-c3-sku-6002-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 9mm sealed on both sides SKU: 6002-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-9mm-sealed-on-both-sides-sku-6002-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm sealed on both sides SKU: 6002-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-sealed-on-both-sides-sku-6002-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm sealed on both sides clearance C3 SKU: 6002-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-sealed-on-both-sides-clearance-c3-sku-6002-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 9mm sealed on both sides clearance C3 SKU: 6002-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-9mm-sealed-on-both-sides-clearance-c3-sku-6002-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Set-screw coupling TR steel C45 black oxide finished bore 16mm with keyway SKU: 60021600](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-16mm-with-keyway-sku-60021600/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 15mm with keyway SKU: 60021500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-15mm-with-keyway-sku-60021500/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 14mm with keyway SKU: 60021400](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-14mm-with-keyway-sku-60021400/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 12mm with keyway SKU: 60021200](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-12mm-with-keyway-sku-60021200/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 10mm with keyway SKU: 60021000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-10mm-with-keyway-sku-60021000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 8mm with keyway SKU: 60020800](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-8mm-with-keyway-sku-60020800/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 6mm with keyway SKU: 60020600](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-6mm-with-keyway-sku-60020600/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm shielded on both sides SKU: 6002-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-shielded-on-both-sides-sku-6002-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKU: 6002-ZZ-C3-MAE](https://maedler.in/product/sku-6002-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm open (unsealed) SKU: 6002-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-open-unsealed-sku-6002-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm open (unsealed) clearance C3 SKU: 6002-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-open-unsealed-clearance-c3-sku-6002-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Set-screw coupling TR steel C45 black oxide finished bore 50mm without keyway SKU: 60015000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-50mm-without-keyway-sku-60015000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 40mm without keyway SKU: 60014000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-40mm-without-keyway-sku-60014000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 35mm without keyway SKU: 60013500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-35mm-without-keyway-sku-60013500/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 30mm without keyway SKU: 60013000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-30mm-without-keyway-sku-60013000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 25mm without keyway SKU: 60012500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-25mm-without-keyway-sku-60012500/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 20mm without keyway SKU: 60012000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-20mm-without-keyway-sku-60012000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm shielded on both sides SKU: 6001-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-shielded-on-both-sides-sku-6001-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm shielded on both sides clearance C3 SKU: 6001-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-shielded-on-both-sides-clearance-c3-sku-6001-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm sealed on both sides SKU: 6001-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-sealed-on-both-sides-sku-6001-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm sealed on both sides SKU: 6001-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-sealed-on-both-sides-sku-6001-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm sealed on both sides clearance C3 SKU: 6001-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-sealed-on-both-sides-clearance-c3-sku-6001-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm sealed on both sides clearance C3 SKU: 6001-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-sealed-on-both-sides-clearance-c3-sku-6001-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Set-screw coupling TR steel C45 black oxide finished bore 16mm without keyway SKU: 60011600](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-16mm-without-keyway-sku-60011600/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 15mm without keyway SKU: 60011500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-15mm-without-keyway-sku-60011500/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 14mm without keyway SKU: 60011400](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-14mm-without-keyway-sku-60011400/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 12mm without keyway SKU: 60011200](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-12mm-without-keyway-sku-60011200/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 10mm without keyway SKU: 60011000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-10mm-without-keyway-sku-60011000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 8mm without keyway SKU: 60010800](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-8mm-without-keyway-sku-60010800/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 6mm without keyway SKU: 60010600](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-6mm-without-keyway-sku-60010600/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Clamp coupling (boc coupling) DIN 115 both sides bore 100mm with keyway material cast iron SKU: 60010000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-100mm-with-keyway-material-cast-iron-sku-60010000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm shielded on both sides SKU: 6001-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-shielded-on-both-sides-sku-6001-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681024](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681020](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681019](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681018](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681018/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681016](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681016/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681015](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681015/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRTG 10 B-1 5/8x3/8" 30 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678130](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 28 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678128](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 27 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678127](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 26 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678126](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 25 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678125](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 24 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678124](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 23 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678123](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 22 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678122](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 21 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678121](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 20 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678120](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 19 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678119](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 18 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678118](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 17 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678117](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 16 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678116](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 15 teeth material steel teeth hardened for taper bush type 1210 SKU: 10678115](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10678115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 14 teeth material steel teeth hardened for taper bush type 1108 SKU: 10678114](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-14-teeth-material-steel-teeth-hardened-for-taper-bush-type-1108-sku-10678114/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 13 teeth material steel teeth hardened for taper bush type 1008 SKU: 10678113](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10678113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 114 teeth material cast iron for taper bush type 2517 SKU: 10677188G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-114-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10677188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 95 teeth material cast iron for taper bush type 2517 SKU: 10677183G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-95-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10677183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 76 teeth material cast iron for taper bush type 2012 SKU: 10677176G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-76-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10677176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 57 teeth material cast iron for taper bush type 2012 SKU: 10677157G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-57-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10677157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 57 teeth material steel for taper bush type 2012 SKU: 10677157](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-57-teeth-material-steel-for-taper-bush-type-2012-sku-10677157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 45 teeth material steel for taper bush type 2012 SKU: 10677145](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-45-teeth-material-steel-for-taper-bush-type-2012-sku-10677145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 38 teeth material steel for taper bush type 2012 SKU: 10677138](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-38-teeth-material-steel-for-taper-bush-type-2012-sku-10677138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 30 teeth material steel for taper bush type 2012 SKU: 10677130](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-30-teeth-material-steel-for-taper-bush-type-2012-sku-10677130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 28 teeth material steel for taper bush type 2012 SKU: 10677128](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-28-teeth-material-steel-for-taper-bush-type-2012-sku-10677128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 27 teeth material steel for taper bush type 2012 SKU: 10677127](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-27-teeth-material-steel-for-taper-bush-type-2012-sku-10677127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 26 teeth material steel for taper bush type 2012 SKU: 10677126](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-26-teeth-material-steel-for-taper-bush-type-2012-sku-10677126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 25 teeth material steel for taper bush type 2012 SKU: 10677125](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-25-teeth-material-steel-for-taper-bush-type-2012-sku-10677125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 24 teeth material steel for taper bush type 2012 SKU: 10677124](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-24-teeth-material-steel-for-taper-bush-type-2012-sku-10677124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 23 teeth material steel for taper bush type 1610 SKU: 10677123](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-23-teeth-material-steel-for-taper-bush-type-1610-sku-10677123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 22 teeth material steel for taper bush type 1610 SKU: 10677122](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-22-teeth-material-steel-for-taper-bush-type-1610-sku-10677122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 21 teeth material steel for taper bush type 1610 SKU: 10677121](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-21-teeth-material-steel-for-taper-bush-type-1610-sku-10677121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 20 teeth material steel for taper bush type 1610 SKU: 10677120](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-20-teeth-material-steel-for-taper-bush-type-1610-sku-10677120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 19 teeth material steel for taper bush type 1610 SKU: 10677119](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-19-teeth-material-steel-for-taper-bush-type-1610-sku-10677119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 18 teeth material steel for taper bush type 1610 SKU: 10677118](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-18-teeth-material-steel-for-taper-bush-type-1610-sku-10677118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 17 teeth material steel for taper bush type 1610 SKU: 10677117](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-17-teeth-material-steel-for-taper-bush-type-1610-sku-10677117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 16 teeth material steel for taper bush type 1610 SKU: 10677116](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-16-teeth-material-steel-for-taper-bush-type-1610-sku-10677116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 15 teeth material steel for taper bush type 1210 SKU: 10677115](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-15-teeth-material-steel-for-taper-bush-type-1210-sku-10677115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 14 teeth material steel for taper bush type 1108 SKU: 10677114](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-14-teeth-material-steel-for-taper-bush-type-1108-sku-10677114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 13 teeth material steel for taper bush type 1008 SKU: 10677113](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-13-teeth-material-steel-for-taper-bush-type-1008-sku-10677113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 114 teeth material steel SKU: 10628800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-114-teeth-material-steel-sku-10628800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 95 teeth material steel SKU: 10628300](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-95-teeth-material-steel-sku-10628300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 80 teeth material steel SKU: 10628000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-80-teeth-material-steel-sku-10628000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 76 teeth material steel SKU: 10627600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-76-teeth-material-steel-sku-10627600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 72 teeth material steel SKU: 10627200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-72-teeth-material-steel-sku-10627200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 70 teeth material steel SKU: 10627000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-70-teeth-material-steel-sku-10627000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 65 teeth material steel SKU: 10626500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-65-teeth-material-steel-sku-10626500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 60 teeth material steel SKU: 10626000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-60-teeth-material-steel-sku-10626000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 57 teeth material steel SKU: 10625700](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-57-teeth-material-steel-sku-10625700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 54 teeth material steel SKU: 10625400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-54-teeth-material-steel-sku-10625400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 50 teeth material steel SKU: 10625000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-50-teeth-material-steel-sku-10625000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 48 teeth material steel SKU: 10624800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-48-teeth-material-steel-sku-10624800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 46 teeth material steel SKU: 10624600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-46-teeth-material-steel-sku-10624600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 45 teeth material steel SKU: 10624500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-45-teeth-material-steel-sku-10624500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 44 teeth material steel SKU: 10624400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-44-teeth-material-steel-sku-10624400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 42 teeth material steel SKU: 10624200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-42-teeth-material-steel-sku-10624200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 40 teeth material steel SKU: 10624000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-40-teeth-material-steel-sku-10624000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 38 teeth material steel SKU: 10623800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-38-teeth-material-steel-sku-10623800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 36 teeth material steel SKU: 10623600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-36-teeth-material-steel-sku-10623600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 35 teeth material steel SKU: 10623500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-35-teeth-material-steel-sku-10623500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 34 teeth material steel SKU: 10623400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-34-teeth-material-steel-sku-10623400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 32 teeth material steel SKU: 10623200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-32-teeth-material-steel-sku-10623200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 30 teeth material steel SKU: 10623000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-30-teeth-material-steel-sku-10623000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 29 teeth material steel SKU: 10622900](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-29-teeth-material-steel-sku-10622900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 28 teeth material steel SKU: 10622800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-28-teeth-material-steel-sku-10622800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 27 teeth material steel SKU: 10622700](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-27-teeth-material-steel-sku-10622700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 26 teeth material steel SKU: 10622600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-26-teeth-material-steel-sku-10622600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 25 teeth material steel SKU: 10622500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-25-teeth-material-steel-sku-10622500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 24 teeth material steel SKU: 10622400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-24-teeth-material-steel-sku-10622400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 23 teeth material steel SKU: 10622300](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-23-teeth-material-steel-sku-10622300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 22 teeth material steel SKU: 10622200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-22-teeth-material-steel-sku-10622200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 21 teeth material steel SKU: 10622100](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-21-teeth-material-steel-sku-10622100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 20 teeth material steel SKU: 10622000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-20-teeth-material-steel-sku-10622000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 19 teeth material steel SKU: 10621900](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-19-teeth-material-steel-sku-10621900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 18 teeth material steel SKU: 10621800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-18-teeth-material-steel-sku-10621800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 17 teeth material steel SKU: 10621700](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-17-teeth-material-steel-sku-10621700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 16 teeth material steel SKU: 10621600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-16-teeth-material-steel-sku-10621600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 15 teeth material steel SKU: 10621500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-15-teeth-material-steel-sku-10621500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 14 teeth material steel SKU: 10621400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-14-teeth-material-steel-sku-10621400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 13 teeth material steel SKU: 10621300](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-13-teeth-material-steel-sku-10621300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 12 teeth material steel SKU: 10621200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-12-teeth-material-steel-sku-10621200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 11 teeth material steel SKU: 10621100](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-11-teeth-material-steel-sku-10621100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 10 teeth material steel SKU: 10621000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-10-teeth-material-steel-sku-10621000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 9 teeth material steel SKU: 10620900](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-9-teeth-material-steel-sku-10620900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 8 teeth material steel SKU: 10620800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-8-teeth-material-steel-sku-10620800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 114 teeth material cast iron SKU: 10618800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-114-teeth-material-cast-iron-sku-10618800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 95 teeth material cast iron SKU: 10618300](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-95-teeth-material-cast-iron-sku-10618300/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 76 teeth material cast iron SKU: 10617600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-76-teeth-material-cast-iron-sku-10617600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 57 teeth material cast iron SKU: 10615700](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-57-teeth-material-cast-iron-sku-10615700/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 45 teeth material cast iron SKU: 10614500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-45-teeth-material-cast-iron-sku-10614500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 40 teeth material steel SKU: 10614000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-40-teeth-material-steel-sku-10614000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 38 teeth material steel SKU: 10613800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-38-teeth-material-steel-sku-10613800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 36 teeth material steel SKU: 10613600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-36-teeth-material-steel-sku-10613600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [One-piece clamp coupling MAS both sides bore 12mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099612](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-12mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099612/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 10mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099610](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-10mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099610/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 8mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099608](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-8mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099608/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 6mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099606](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-6mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099606/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 5mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099605](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-5mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099605/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 4mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099604](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-4mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099604/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 3mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099603](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-3mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099603/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Set-screw coupling TR bore 50mm with keyway stainless steel 1.4305 SKU: 60099250](https://maedler.in/product/set-screw-coupling-tr-bore-50mm-with-keyway-stainless-steel-1-4305-sku-60099250/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 40mm with keyway stainless steel 1.4305 SKU: 60099240](https://maedler.in/product/set-screw-coupling-tr-bore-40mm-with-keyway-stainless-steel-1-4305-sku-60099240/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 35mm with keyway stainless steel 1.4305 SKU: 60099235](https://maedler.in/product/set-screw-coupling-tr-bore-35mm-with-keyway-stainless-steel-1-4305-sku-60099235/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 30mm with keyway stainless steel 1.4305 SKU: 60099230](https://maedler.in/product/set-screw-coupling-tr-bore-30mm-with-keyway-stainless-steel-1-4305-sku-60099230/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 25mm with keyway stainless steel 1.4305 SKU: 60099225](https://maedler.in/product/set-screw-coupling-tr-bore-25mm-with-keyway-stainless-steel-1-4305-sku-60099225/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 20mm with keyway stainless steel 1.4305 SKU: 60099220](https://maedler.in/product/set-screw-coupling-tr-bore-20mm-with-keyway-stainless-steel-1-4305-sku-60099220/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 16mm with keyway stainless steel 1.4305 SKU: 60099216](https://maedler.in/product/set-screw-coupling-tr-bore-16mm-with-keyway-stainless-steel-1-4305-sku-60099216/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 15mm with keyway stainless steel 1.4305 SKU: 60099215](https://maedler.in/product/set-screw-coupling-tr-bore-15mm-with-keyway-stainless-steel-1-4305-sku-60099215/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 14mm with keyway stainless steel 1.4305 SKU: 60099214](https://maedler.in/product/set-screw-coupling-tr-bore-14mm-with-keyway-stainless-steel-1-4305-sku-60099214/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 12mm with keyway stainless steel 1.4305 SKU: 60099212](https://maedler.in/product/set-screw-coupling-tr-bore-12mm-with-keyway-stainless-steel-1-4305-sku-60099212/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 10mm with keyway stainless steel 1.4305 SKU: 60099210](https://maedler.in/product/set-screw-coupling-tr-bore-10mm-with-keyway-stainless-steel-1-4305-sku-60099210/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 8mm with keyway stainless steel 1.4305 SKU: 60099208](https://maedler.in/product/set-screw-coupling-tr-bore-8mm-with-keyway-stainless-steel-1-4305-sku-60099208/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 6mm with keyway stainless steel 1.4305 SKU: 60099206](https://maedler.in/product/set-screw-coupling-tr-bore-6mm-with-keyway-stainless-steel-1-4305-sku-60099206/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 40mm without keyway stainless steel 1.4305 SKU: 60099140](https://maedler.in/product/set-screw-coupling-tr-bore-40mm-without-keyway-stainless-steel-1-4305-sku-60099140/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 35mm without keyway stainless steel 1.4305 SKU: 60099135](https://maedler.in/product/set-screw-coupling-tr-bore-35mm-without-keyway-stainless-steel-1-4305-sku-60099135/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 30mm without keyway stainless steel 1.4305 SKU: 60099130](https://maedler.in/product/set-screw-coupling-tr-bore-30mm-without-keyway-stainless-steel-1-4305-sku-60099130/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 25mm without keyway stainless steel 1.4305 SKU: 60099125](https://maedler.in/product/set-screw-coupling-tr-bore-25mm-without-keyway-stainless-steel-1-4305-sku-60099125/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 20mm without keyway stainless steel 1.4305 SKU: 60099120](https://maedler.in/product/set-screw-coupling-tr-bore-20mm-without-keyway-stainless-steel-1-4305-sku-60099120/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 16mm without keyway stainless steel 1.4305 SKU: 60099116](https://maedler.in/product/set-screw-coupling-tr-bore-16mm-without-keyway-stainless-steel-1-4305-sku-60099116/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 15mm without keyway stainless steel 1.4305 SKU: 60099115](https://maedler.in/product/set-screw-coupling-tr-bore-15mm-without-keyway-stainless-steel-1-4305-sku-60099115/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 14mm without keyway stainless steel 1.4305 SKU: 60099114](https://maedler.in/product/set-screw-coupling-tr-bore-14mm-without-keyway-stainless-steel-1-4305-sku-60099114/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 12mm without keyway stainless steel 1.4305 SKU: 60099112](https://maedler.in/product/set-screw-coupling-tr-bore-12mm-without-keyway-stainless-steel-1-4305-sku-60099112/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 10mm without keyway stainless steel 1.4305 SKU: 60099110](https://maedler.in/product/set-screw-coupling-tr-bore-10mm-without-keyway-stainless-steel-1-4305-sku-60099110/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 8mm without keyway stainless steel 1.4305 SKU: 60099108](https://maedler.in/product/set-screw-coupling-tr-bore-8mm-without-keyway-stainless-steel-1-4305-sku-60099108/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 6mm without keyway stainless steel 1.4305 SKU: 60099106](https://maedler.in/product/set-screw-coupling-tr-bore-6mm-without-keyway-stainless-steel-1-4305-sku-60099106/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Two-piece clamp coupling MAT both sides bore 50mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60095000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-50mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60095000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 40mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60094000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-40mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60094000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 35mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60093500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-35mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60093500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 30mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60093000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-30mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60093000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 25mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60092500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-25mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60092500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 20mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60092000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-20mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60092000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm shielded on both sides SKU: 6009-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-shielded-on-both-sides-sku-6009-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm shielded on both sides clearance C3 SKU: 6009-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-shielded-on-both-sides-clearance-c3-sku-6009-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm sealed on both sides SKU: 6009-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-sealed-on-both-sides-sku-6009-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm sealed on both sides clearance C3 SKU: 6009-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-sealed-on-both-sides-clearance-c3-sku-6009-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm sealed on both sides SKU: 6009-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-sealed-on-both-sides-sku-6009-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Two-piece clamp coupling MAT both sides bore 19mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091900](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-19mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091900/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 16mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091600](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-16mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091600/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 15mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-15mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 14mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091400](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-14mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091400/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 12mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091200](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-12mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091200/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 10mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-10mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 8mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60090800](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-8mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60090800/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 6mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60090600](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-6mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60090600/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm shielded on both sides SKU: 6009-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-shielded-on-both-sides-sku-6009-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm open (unsealed) SKU: 6009-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-open-unsealed-sku-6009-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm open (unsealed) clearance C3 SKU: 6009-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-open-unsealed-clearance-c3-sku-6009-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Two-piece clamp coupling MAT both sides bore 50mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60085000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-50mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60085000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 40mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60084000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-40mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60084000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 35mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60083500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-35mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60083500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 30mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60083000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-30mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60083000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 25mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60082500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-25mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60082500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 20mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60082000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-20mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60082000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm shielded on both sides SKU: 6008-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-shielded-on-both-sides-sku-6008-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm shielded on both sides clearance C3 SKU: 6008-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-shielded-on-both-sides-clearance-c3-sku-6008-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm sealed on both sides SKU: 6008-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-sealed-on-both-sides-sku-6008-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm sealed on both sides clearance C3 SKU: 6008-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-sealed-on-both-sides-clearance-c3-sku-6008-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm sealed on both sides SKU: 6008-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-sealed-on-both-sides-sku-6008-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Two-piece clamp coupling MAT both sides bore 19mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081900](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-19mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081900/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 16mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081600](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-16mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081600/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 15mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-15mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 14mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081400](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-14mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081400/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 12mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081200](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-12mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081200/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 10mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-10mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 8mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080800](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-8mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080800/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 6mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080600](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-6mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080600/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 5mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-5mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 4mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080400](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-4mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080400/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 3mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080300](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-3mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080300/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm shielded on both sides SKU: 6008-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-shielded-on-both-sides-sku-6008-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm open (unsealed) SKU: 6008-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-open-unsealed-sku-6008-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm open (unsealed) clearance C3 SKU: 6008-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-open-unsealed-clearance-c3-sku-6008-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [One-piece clamp coupling MAS both sides bore 50mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60075000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-50mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60075000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 40mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60074000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-40mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60074000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 35mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60073500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-35mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60073500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 30mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60073000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-30mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60073000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 25mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60072500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-25mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60072500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 20mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60072000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-20mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60072000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm shielded on both sides SKU: 6007-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-shielded-on-both-sides-sku-6007-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm shielded on both sides clearance C3 SKU: 6007-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-shielded-on-both-sides-clearance-c3-sku-6007-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm sealed on both sides SKU: 6007-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-sealed-on-both-sides-sku-6007-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm sealed on both sides clearance C3 SKU: 6007-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-sealed-on-both-sides-clearance-c3-sku-6007-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm sealed on both sides SKU: 6007-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-sealed-on-both-sides-sku-6007-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [One-piece clamp coupling MAS both sides bore 19mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071900](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-19mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071900/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 16mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071600](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-16mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071600/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 15mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-15mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 14mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071400](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-14mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071400/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 12mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071200](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-12mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071200/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 10mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-10mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 8mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60070800](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-8mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60070800/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 6mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60070600](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-6mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60070600/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm shielded on both sides SKU: 6007-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-shielded-on-both-sides-sku-6007-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm open (unsealed) SKU: 6007-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-open-unsealed-sku-6007-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682030](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682028](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682025](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682024](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682022](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682022/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682020](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682019](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681942](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681942/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681940](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681940/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681938](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681938/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681935](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681935/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681932](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681932/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681930](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681930/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681928](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681928/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681925](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681925/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681924](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681924/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681922](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681922/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681920](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681920/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681919](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681919/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681842](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681842/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681840](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681840/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681838](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681838/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681835](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681835/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681832](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681832/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681830](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681830/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681828](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681828/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681825](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681825/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681824](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681824/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681822](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681822/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681820](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681820/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681819](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681819/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681738](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681738/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681735](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681735/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681732](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681732/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681730](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681730/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681728](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681728/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681725](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681725/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681724](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681724/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681722](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681722/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681720](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681720/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681719](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681719/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681638](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681638/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681635](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681635/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681632](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681632/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681630](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681630/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681628](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681628/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681625](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681625/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681624](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681624/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681622](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681622/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681620](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681620/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681619](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681619/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681535](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681532](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681530](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681528](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681525](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681524](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681522](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681520](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681519](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681432](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681430](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681428](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681425](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681420](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681419](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681418](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681416](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681415](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681332](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681330](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681328](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681325](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681324](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681322](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681320](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681319](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681318](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681318/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681316](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681316/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681315](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681315/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681232](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681230](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681228](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681225](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681224](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681222](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681220](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681219](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681218](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681218/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681216](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681216/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681215](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681215/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681130](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681128](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681125](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681124](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681120](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681119](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681118](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681118/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681116](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681116/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681115](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681115/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 50.0mm black polyacetal SKU: 60125000](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-50-0mm-black-polyacetal-sku-60125000/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 41.3mm black polyacetal SKU: 60124800](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-41-3mm-black-polyacetal-sku-60124800/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for aluminium couplings HF, HFD, HZ, HZD outside diameter 33.3mm lenght 17mm black polyacetal SKU: 60124600](https://maedler.in/product/sliding-disc-spare-part-for-aluminium-couplings-hf-hfd-hz-hzd-outside-diameter-33-3mm-lenght-17mm-black-polyacetal-sku-60124600/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HFD stainless and HZD stainless outside diameter 33.3mm lenght 11mm black polyacetal SKU: 60124500](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hfd-stainless-and-hzd-stainless-outside-diameter-33-3mm-lenght-11mm-black-polyacetal-sku-60124500/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 25.4mm black polyacetal SKU: 60124400](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-25-4mm-black-polyacetal-sku-60124400/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 19.1mm black polyacetal SKU: 60124200](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-19-1mm-black-polyacetal-sku-60124200/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 12.7mm black polyacetal SKU: 60123900](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-12-7mm-black-polyacetal-sku-60123900/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 9.5mm black polyacetal SKU: 60123800](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-9-5mm-black-polyacetal-sku-60123800/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 6.4mm black polyacetal SKU: 60123700](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-6-4mm-black-polyacetal-sku-60123700/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Torsionally-stiff coupling HZ with blind hole bore 6mm max. torque 0.5 Nm outside diameter 12.7mm SKU: 60120800](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-6mm-max-torque-0-5-nm-outside-diameter-12-7mm-sku-60120800/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 4mm max. torque 0.5 Nm outside diameter 12.7mm SKU: 60120700](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-4mm-max-torque-0-5-nm-outside-diameter-12-7mm-sku-60120700/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 3mm max. torque 0.5 Nm outside diameter 12.7mm SKU: 60120600](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-3mm-max-torque-0-5-nm-outside-diameter-12-7mm-sku-60120600/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 4mm max. torque 0.21 Nm outside diameter 9.5mm SKU: 60120400](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-4mm-max-torque-0-21-nm-outside-diameter-9-5mm-sku-60120400/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 3mm max. torque 0.21 Nm outside diameter 9.5mm SKU: 60120300](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-3mm-max-torque-0-21-nm-outside-diameter-9-5mm-sku-60120300/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 3mm max. torque 0.06 Nm outside diameter 6.4mm SKU: 60120200](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-3mm-max-torque-0-06-nm-outside-diameter-6-4mm-sku-60120200/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 2mm max. torque 0.06 Nm outside diameter 6.4mm SKU: 60120100](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-2mm-max-torque-0-06-nm-outside-diameter-6-4mm-sku-60120100/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HB bore 16mm max. torque 3.5 Nm outside diameter 41.4mm +++ set-screw-style +++ SKU: 60111700](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-16mm-max-torque-3-5-nm-outside-diameter-41-4mm-set-screw-style-sku-60111700/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 12mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60111600](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-12mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60111600/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 10mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60111500](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-10mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60111500/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 8mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60111400](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-8mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60111400/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 8mm max. torque 1.7 Nm outside diameter 28mm SKU: 60111000](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-8mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60111000/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 6mm max. torque 1.7 Nm outside diameter 28mm SKU: 60110900](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-6mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60110900/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 4mm max. torque 1.7 Nm outside diameter 28mm SKU: 60110800](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-4mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60110800/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 6mm max. torque 0.3 Nm outside diameter 19.1mm SKU: 60110600](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-6mm-max-torque-0-3-nm-outside-diameter-19-1mm-sku-60110600/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 4mm max. torque 0.3 Nm outside diameter 19.1mm SKU: 60110400](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-4mm-max-torque-0-3-nm-outside-diameter-19-1mm-sku-60110400/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 3mm max. torque 0.3 Nm outside diameter 19.1mm SKU: 60110300](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-3mm-max-torque-0-3-nm-outside-diameter-19-1mm-sku-60110300/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm shielded on both sides SKU: 6010-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-shielded-on-both-sides-sku-6010-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm shielded on both sides clearance C3 SKU: 6010-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-shielded-on-both-sides-clearance-c3-sku-6010-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm sealed on both sides SKU: 6010-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-sealed-on-both-sides-sku-6010-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm sealed on both sides clearance C3 SKU: 6010-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-sealed-on-both-sides-clearance-c3-sku-6010-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm sealed on both sides SKU: 6010-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-sealed-on-both-sides-sku-6010-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Torsionally-stiff coupling HU bore 12mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60101800](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-12mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60101800/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 10mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60101500](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-10mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60101500/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 8mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60101400](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-8mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60101400/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 6mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60101300](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-6mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60101300/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 8mm max. torque 1.7 Nm outside diameter 28mm SKU: 60101000](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-8mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60101000/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 6mm max. torque 1.7 Nm outside diameter 28mm SKU: 60100900](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-6mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60100900/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 4mm max. torque 1.7 Nm outside diameter 28mm SKU: 60100800](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-4mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60100800/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 3mm max. torque 1.7 Nm outside diameter 28mm SKU: 60100700](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-3mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60100700/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 4mm max. torque 0.3 Nm outside diameter 18mm SKU: 60100400](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-4mm-max-torque-0-3-nm-outside-diameter-18mm-sku-60100400/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 3mm max. torque 0.3 Nm outside diameter 18mm SKU: 60100300](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-3mm-max-torque-0-3-nm-outside-diameter-18mm-sku-60100300/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 2mm max. torque 0.3 Nm outside diameter 18mm SKU: 60100200](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-2mm-max-torque-0-3-nm-outside-diameter-18mm-sku-60100200/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [MAEDLER deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm shielded on both sides SKU: 6010-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-shielded-on-both-sides-sku-6010-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm open (unsealed) SKU: 6010-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-open-unsealed-sku-6010-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm open (unsealed) clearance C3 SKU: 6010-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-open-unsealed-clearance-c3-sku-6010-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Two-piece clamp coupling MAT both sides bore 50mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099950](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-50mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099950/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 40mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099940](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-40mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099940/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 35mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099935](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-35mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099935/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 30mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099930](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-30mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099930/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 25mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099925](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-25mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099925/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 20mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099920](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-20mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099920/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 19mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099919](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-19mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099919/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 16mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099916](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-16mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099916/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 15mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099915](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-15mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099915/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 14mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099914](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-14mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099914/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 12mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099912](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-12mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099912/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 10mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099910](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-10mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099910/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 8mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099908](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-8mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099908/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 6mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099906](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-6mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099906/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 50mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099850](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-50mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099850/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 40mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099840](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-40mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099840/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 35mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099835](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-35mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099835/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 30mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099830](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-30mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099830/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 25mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099825](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-25mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099825/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 20mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099820](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-20mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099820/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 19mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099819](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-19mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099819/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 16mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099816](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-16mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099816/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 15mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099815](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-15mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099815/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 14mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099814](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-14mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099814/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 12mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099812](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-12mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099812/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 10mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099810](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-10mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099810/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 8mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099808](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-8mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099808/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 6mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099806](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-6mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099806/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 5mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099805](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-5mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099805/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 4mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099804](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-4mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099804/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 3mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099803](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-3mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099803/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 50mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099750](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-50mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099750/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 40mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099740](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-40mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099740/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 35mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099735](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-35mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099735/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 30mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099730](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-30mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099730/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 25mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099725](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-25mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099725/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 20mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099720](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-20mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099720/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 19mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099719](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-19mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099719/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 16mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099716](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-16mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099716/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 15mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099715](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-15mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099715/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 14mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099714](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-14mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099714/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 12mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099712](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-12mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099712/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 10mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099710](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-10mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099710/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 8mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099708](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-8mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099708/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 6mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099706](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-6mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099706/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 50mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099650](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-50mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099650/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 40mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099640](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-40mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099640/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 35mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099635](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-35mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099635/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 30mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099630](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-30mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099630/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 25mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099625](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-25mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099625/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 20mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099620](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-20mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099620/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 19mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099619](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-19mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099619/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 16mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099616](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-16mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099616/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 15mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099615](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-15mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099615/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 14mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099614](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-14mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099614/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699124](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699123](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699122](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699121](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699120](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699119](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699118](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699117](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699116](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699115](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699114](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699113](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699112](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 30 teeth material steel teeth induction hardened SKU: 10688130](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-30-teeth-material-steel-teeth-induction-hardened-sku-10688130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 28 teeth material steel teeth induction hardened SKU: 10688128](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-28-teeth-material-steel-teeth-induction-hardened-sku-10688128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 27 teeth material steel teeth induction hardened SKU: 10688127](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-27-teeth-material-steel-teeth-induction-hardened-sku-10688127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 26 teeth material steel teeth induction hardened SKU: 10688126](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-26-teeth-material-steel-teeth-induction-hardened-sku-10688126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 25 teeth material steel teeth induction hardened SKU: 10688125](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-25-teeth-material-steel-teeth-induction-hardened-sku-10688125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 24 teeth material steel teeth induction hardened SKU: 10688124](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-24-teeth-material-steel-teeth-induction-hardened-sku-10688124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 23 teeth material steel teeth induction hardened SKU: 10688123](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-23-teeth-material-steel-teeth-induction-hardened-sku-10688123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 22 teeth material steel teeth induction hardened SKU: 10688122](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-22-teeth-material-steel-teeth-induction-hardened-sku-10688122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 21 teeth material steel teeth induction hardened SKU: 10688121](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-21-teeth-material-steel-teeth-induction-hardened-sku-10688121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 20 teeth material steel teeth induction hardened SKU: 10688120](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-20-teeth-material-steel-teeth-induction-hardened-sku-10688120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 19 teeth material steel teeth induction hardened SKU: 10688119](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-19-teeth-material-steel-teeth-induction-hardened-sku-10688119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 18 teeth material steel teeth induction hardened SKU: 10688118](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-18-teeth-material-steel-teeth-induction-hardened-sku-10688118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 17 teeth material steel teeth induction hardened SKU: 10688117](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-17-teeth-material-steel-teeth-induction-hardened-sku-10688117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 16 teeth material steel teeth induction hardened SKU: 10688116](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-16-teeth-material-steel-teeth-induction-hardened-sku-10688116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 15 teeth material steel teeth induction hardened SKU: 10688115](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-15-teeth-material-steel-teeth-induction-hardened-sku-10688115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 14 teeth material steel teeth induction hardened SKU: 10688114](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-14-teeth-material-steel-teeth-induction-hardened-sku-10688114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 13 teeth material steel teeth induction hardened SKU: 10688113](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-13-teeth-material-steel-teeth-induction-hardened-sku-10688113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 12 teeth material steel teeth induction hardened SKU: 10688112](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-12-teeth-material-steel-teeth-induction-hardened-sku-10688112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 11 teeth material steel teeth induction hardened SKU: 10688111](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-11-teeth-material-steel-teeth-induction-hardened-sku-10688111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 10 teeth material steel teeth induction hardened SKU: 10688110](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-10-teeth-material-steel-teeth-induction-hardened-sku-10688110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 9 teeth material steel teeth induction hardened SKU: 10688109](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-9-teeth-material-steel-teeth-induction-hardened-sku-10688109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 8 teeth material steel teeth induction hardened SKU: 10688108](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-8-teeth-material-steel-teeth-induction-hardened-sku-10688108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682542](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682542/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682540](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682540/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682538](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682538/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682535](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682532](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682530](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682528](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682525](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682524](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682522](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682520](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682519](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682442](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682442/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682440](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682440/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682438](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682438/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682435](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682435/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682432](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682430](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682428](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682425](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682424](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682424/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682422](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682422/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682420](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682419](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682342](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682342/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682340](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682340/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682338](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682338/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682335](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682335/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682332](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682330](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682328](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682325](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682324](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682322](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682320](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682319](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682242](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682242/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682240](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682240/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682238](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682238/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682235](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682235/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682232](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682230](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682228](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682225](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682224](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682222](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682220](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682219](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682142](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682142/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682140](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682140/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682138](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682138/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682135](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682135/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682132](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682132/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682130](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682128](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682125](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682124](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682122](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682122/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682120](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682119](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682042](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682042/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682040](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682040/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682038](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682038/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682035](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682035/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682032](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682032/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 3mm overall length 45.2mm hub diameter 18.2mm SKU: 60161803](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-3mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161803/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 35mm overall length 78mm hub diameter 65mm SKU: 60156635](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-35mm-overall-length-78mm-hub-diameter-65mm-sku-60156635/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 32mm overall length 79mm hub diameter 66mm SKU: 60156632](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-32mm-overall-length-79mm-hub-diameter-66mm-sku-60156632/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 28mm overall length 79mm hub diameter 66mm SKU: 60156628](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-28mm-overall-length-79mm-hub-diameter-66mm-sku-60156628/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 24mm overall length 79mm hub diameter 66mm SKU: 60156624](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-24mm-overall-length-79mm-hub-diameter-66mm-sku-60156624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 19mm overall length 79mm hub diameter 66mm SKU: 60156619](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-19mm-overall-length-79mm-hub-diameter-66mm-sku-60156619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 14mm overall length 79mm hub diameter 66mm SKU: 60156614](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-14mm-overall-length-79mm-hub-diameter-66mm-sku-60156614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 25mm overall length 65mm hub diameter 56mm SKU: 60155625](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-25mm-overall-length-65mm-hub-diameter-56mm-sku-60155625/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 24mm overall length 65mm hub diameter 56mm SKU: 60155624](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-24mm-overall-length-65mm-hub-diameter-56mm-sku-60155624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 19mm overall length 65mm hub diameter 56mm SKU: 60155619](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-19mm-overall-length-65mm-hub-diameter-56mm-sku-60155619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 14mm overall length 65mm hub diameter 56mm SKU: 60155614](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-14mm-overall-length-65mm-hub-diameter-56mm-sku-60155614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 11mm overall length 65mm hub diameter 56mm SKU: 60155611](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-11mm-overall-length-65mm-hub-diameter-56mm-sku-60155611/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 10mm overall length 65mm hub diameter 56mm SKU: 60155610](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-10mm-overall-length-65mm-hub-diameter-56mm-sku-60155610/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 25mm overall length 63mm hub diameter 45mm SKU: 60154625](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-25mm-overall-length-63mm-hub-diameter-45mm-sku-60154625/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 24mm overall length 63mm hub diameter 45mm SKU: 60154624](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-24mm-overall-length-63mm-hub-diameter-45mm-sku-60154624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 19mm overall length 63mm hub diameter 45mm SKU: 60154619](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-19mm-overall-length-63mm-hub-diameter-45mm-sku-60154619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 14mm overall length 63mm hub diameter 45mm SKU: 60154614](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-14mm-overall-length-63mm-hub-diameter-45mm-sku-60154614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 11mm overall length 63mm hub diameter 45mm SKU: 60154611](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-11mm-overall-length-63mm-hub-diameter-45mm-sku-60154611/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 10mm overall length 63mm hub diameter 45mm SKU: 60154610](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-10mm-overall-length-63mm-hub-diameter-45mm-sku-60154610/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 20mm overall length 49.7mm hub diameter 37.4mm SKU: 60153720](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-20mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153720/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 18mm overall length 49.7mm hub diameter 37.4mm SKU: 60153718](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-18mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153718/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 16mm overall length 49.7mm hub diameter 37.4mm SKU: 60153716](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-16mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153716/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 14mm overall length 49.7mm hub diameter 37.4mm SKU: 60153714](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-14mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153714/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 12mm overall length 49.7mm hub diameter 37.4mm SKU: 60153712](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-12mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153712/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 10mm overall length 49.7mm hub diameter 37.4mm SKU: 60153710](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-10mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153710/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 16mm overall length 40mm hub diameter 31.0mm SKU: 60153116](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-16mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153116/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 14mm overall length 40mm hub diameter 31.0mm SKU: 60153114](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-14mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153114/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 12mm overall length 40mm hub diameter 31.0mm SKU: 60153112](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-12mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153112/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 10mm overall length 40mm hub diameter 31.0mm SKU: 60153110](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-10mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153110/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 8mm overall length 40mm hub diameter 31.0mm SKU: 60153108](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-8mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153108/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 3.2Nm both sides bore 12mm overall length 37.5mm hub diameter 23.4mm SKU: 60152312](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-3-2nm-both-sides-bore-12mm-overall-length-37-5mm-hub-diameter-23-4mm-sku-60152312/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 3.2Nm both sides bore 10mm overall length 37.5mm hub diameter 23.4mm SKU: 60152310](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-3-2nm-both-sides-bore-10mm-overall-length-37-5mm-hub-diameter-23-4mm-sku-60152310/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 3.2Nm both sides bore 8mm overall length 37.5mm hub diameter 23.4mm SKU: 60152308](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-3-2nm-both-sides-bore-8mm-overall-length-37-5mm-hub-diameter-23-4mm-sku-60152308/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 3.2Nm both sides bore 6mm overall length 37.5mm hub diameter 23.4mm SKU: 60152306](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-3-2nm-both-sides-bore-6mm-overall-length-37-5mm-hub-diameter-23-4mm-sku-60152306/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 8mm overall length 31mm hub diameter 18.2mm SKU: 60151808](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-8mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151808/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 6mm overall length 31mm hub diameter 18.2mm SKU: 60151806](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-6mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151806/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 5mm overall length 31mm hub diameter 18.2mm SKU: 60151805](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-5mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151805/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 4mm overall length 31mm hub diameter 18.2mm SKU: 60151804](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-4mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151804/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 3mm overall length 31mm hub diameter 18.2mm SKU: 60151803](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-3mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151803/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Torsionally-stiff coupling HFD with through hole bore 30mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60143400](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-30mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60143400/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 20mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60143200](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-20mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60143200/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60143000](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60143000/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 20mm max. torque 30.0 Nm outside diameter 50mm SKU: 60142400](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-20mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60142400/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 30.0 Nm outside diameter 50mm SKU: 60142200](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60142200/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 30.0 Nm outside diameter 50mm SKU: 60142000](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60142000/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141805](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141805/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141800](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141800/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141605](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141605/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141600](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141600/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141505](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141505/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141500](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141500/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141305](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141305/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141300](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141300/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141205](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141205/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141200](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141200/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141105](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141105/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141100](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141100/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140905](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140905/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140900](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140900/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140805](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140805/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140800](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140800/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140705](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140705/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140700](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140700/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 6mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140305](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-6mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140305/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 6mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140300](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-6mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140300/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 5mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140205](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-5mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140205/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 5mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140200](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-5mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140200/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 4mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140105](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-4mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140105/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 4mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140100](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-4mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140100/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 30mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60132705](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-30mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60132705/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 20mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60132605](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-20mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60132605/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60132505](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60132505/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 20mm max. torque 30.0 Nm outside diameter 50mm SKU: 60132005](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-20mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60132005/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 30.0 Nm outside diameter 50mm SKU: 60131905](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60131905/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 30.0 Nm outside diameter 50mm SKU: 60131805](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60131805/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 17,0 Nm outside diameter 41,3mm SKU: 60131505](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-170-nm-outside-diameter-413mm-sku-60131505/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131500](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131500/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131305](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131305/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131300](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131300/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131205](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131205/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131200](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131200/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60131005](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60131005/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60131000](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60131000/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60130905](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60130905/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60130900](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60130900/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60130805](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60130805/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60130800](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60130800/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130705](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130705/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130700](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130700/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130605](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130605/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130600](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130600/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130505](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130505/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130500](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130500/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130305](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130305/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 8mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130300](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-8mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130300/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 6mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130205](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-6mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130205/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 6mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130200](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-6mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130200/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 4mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130105](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-4mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130105/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 4mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130100](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-4mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130100/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 57.1mm black polyacetal SKU: 60125700](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-57-1mm-black-polyacetal-sku-60125700/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sprocket KRT 12 B-1 3/4x7/16" 38 teeth material steel for taper bush type 2517 SKU: 10777138](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-38-teeth-material-steel-for-taper-bush-type-2517-sku-10777138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 30 teeth material steel for taper bush type 2517 SKU: 10777130](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-30-teeth-material-steel-for-taper-bush-type-2517-sku-10777130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 28 teeth material steel for taper bush type 2517 SKU: 10777128](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-28-teeth-material-steel-for-taper-bush-type-2517-sku-10777128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 27 teeth material steel for taper bush type 2517 SKU: 10777127](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-27-teeth-material-steel-for-taper-bush-type-2517-sku-10777127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 26 teeth material steel for taper bush type 2517 SKU: 10777126](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-26-teeth-material-steel-for-taper-bush-type-2517-sku-10777126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 25 teeth material steel for taper bush type 2517 SKU: 10777125](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-25-teeth-material-steel-for-taper-bush-type-2517-sku-10777125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 24 teeth material steel for taper bush type 2517 SKU: 10777124](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-24-teeth-material-steel-for-taper-bush-type-2517-sku-10777124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 23 teeth material steel for taper bush type 2517 SKU: 10777123](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-23-teeth-material-steel-for-taper-bush-type-2517-sku-10777123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 22 teeth material steel for taper bush type 2517 SKU: 10777122](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-22-teeth-material-steel-for-taper-bush-type-2517-sku-10777122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 21 teeth material steel for taper bush type 2517 SKU: 10777121](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-21-teeth-material-steel-for-taper-bush-type-2517-sku-10777121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 20 teeth material steel for taper bush type 2012 SKU: 10777120](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-20-teeth-material-steel-for-taper-bush-type-2012-sku-10777120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 19 teeth material steel for taper bush type 2012 SKU: 10777119](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-19-teeth-material-steel-for-taper-bush-type-2012-sku-10777119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 18 teeth material steel for taper bush type 2012 SKU: 10777118](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-18-teeth-material-steel-for-taper-bush-type-2012-sku-10777118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 17 teeth material steel for taper bush type 1610 SKU: 10777117](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-17-teeth-material-steel-for-taper-bush-type-1610-sku-10777117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 16 teeth material steel for taper bush type 1610 SKU: 10777116](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-16-teeth-material-steel-for-taper-bush-type-1610-sku-10777116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 15 teeth material steel for taper bush type 1610 SKU: 10777115](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-15-teeth-material-steel-for-taper-bush-type-1610-sku-10777115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 14 teeth material steel for taper bush type 1610 SKU: 10777114](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-14-teeth-material-steel-for-taper-bush-type-1610-sku-10777114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 13 teeth material steel for taper bush type 1210 SKU: 10777113](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-13-teeth-material-steel-for-taper-bush-type-1210-sku-10777113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 95 teeth material steel SKU: 10728300](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-95-teeth-material-steel-sku-10728300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 80 teeth material steel SKU: 10728000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-80-teeth-material-steel-sku-10728000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 76 teeth material steel SKU: 10727600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-76-teeth-material-steel-sku-10727600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 72 teeth material steel SKU: 10727200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-72-teeth-material-steel-sku-10727200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 70 teeth material steel SKU: 10727000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-70-teeth-material-steel-sku-10727000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 65 teeth material steel SKU: 10726500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-65-teeth-material-steel-sku-10726500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 60 teeth material steel SKU: 10726000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-60-teeth-material-steel-sku-10726000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 57 teeth material steel SKU: 10725700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-57-teeth-material-steel-sku-10725700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 54 teeth material steel SKU: 10725400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-54-teeth-material-steel-sku-10725400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 50 teeth material steel SKU: 10725000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-50-teeth-material-steel-sku-10725000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 48 teeth material steel SKU: 10724800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-48-teeth-material-steel-sku-10724800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 47 teeth material steel SKU: 10724700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-47-teeth-material-steel-sku-10724700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 46 teeth material steel SKU: 10724600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-46-teeth-material-steel-sku-10724600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 45 teeth material steel SKU: 10724500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-45-teeth-material-steel-sku-10724500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 44 teeth material steel SKU: 10724400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-44-teeth-material-steel-sku-10724400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 42 teeth material steel SKU: 10724200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-42-teeth-material-steel-sku-10724200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 40 teeth material steel SKU: 10724000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-40-teeth-material-steel-sku-10724000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 38 teeth material steel SKU: 10723800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-38-teeth-material-steel-sku-10723800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 36 teeth material steel SKU: 10723600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-36-teeth-material-steel-sku-10723600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 35 teeth material steel SKU: 10723500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-35-teeth-material-steel-sku-10723500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 34 teeth material steel SKU: 10723400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-34-teeth-material-steel-sku-10723400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 32 teeth material steel SKU: 10723200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-32-teeth-material-steel-sku-10723200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 30 teeth material steel SKU: 10723000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-30-teeth-material-steel-sku-10723000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 29 teeth material steel SKU: 10722900](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-29-teeth-material-steel-sku-10722900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 28 teeth material steel SKU: 10722800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-28-teeth-material-steel-sku-10722800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 27 teeth material steel SKU: 10722700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-27-teeth-material-steel-sku-10722700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 26 teeth material steel SKU: 10722600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-26-teeth-material-steel-sku-10722600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 25 teeth material steel SKU: 10722500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-25-teeth-material-steel-sku-10722500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 24 teeth material steel SKU: 10722400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-24-teeth-material-steel-sku-10722400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 23 teeth material steel SKU: 10722300](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-23-teeth-material-steel-sku-10722300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 22 teeth material steel SKU: 10722200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-22-teeth-material-steel-sku-10722200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 21 teeth material steel SKU: 10722100](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-21-teeth-material-steel-sku-10722100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 20 teeth material steel SKU: 10722000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-20-teeth-material-steel-sku-10722000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 19 teeth material steel SKU: 10721900](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-19-teeth-material-steel-sku-10721900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 18 teeth material steel SKU: 10721800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-18-teeth-material-steel-sku-10721800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 17 teeth material steel SKU: 10721700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-17-teeth-material-steel-sku-10721700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 16 teeth material steel SKU: 10721600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-16-teeth-material-steel-sku-10721600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 15 teeth material steel SKU: 10721500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-15-teeth-material-steel-sku-10721500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 14 teeth material steel SKU: 10721400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-14-teeth-material-steel-sku-10721400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 13 teeth material steel SKU: 10721300](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-13-teeth-material-steel-sku-10721300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 12 teeth material steel SKU: 10721200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-12-teeth-material-steel-sku-10721200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 11 teeth material steel SKU: 10721100](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-11-teeth-material-steel-sku-10721100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 10 teeth material steel SKU: 10721000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-10-teeth-material-steel-sku-10721000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 9 teeth material steel SKU: 10720900](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-9-teeth-material-steel-sku-10720900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 8 teeth material steel SKU: 10720800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-8-teeth-material-steel-sku-10720800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 114 teeth material cast iron SKU: 10718800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-114-teeth-material-cast-iron-sku-10718800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 95 teeth material cast iron SKU: 10718300](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-95-teeth-material-cast-iron-sku-10718300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 76 teeth material cast iron SKU: 10717600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-76-teeth-material-cast-iron-sku-10717600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 57 teeth material cast iron SKU: 10715700](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-57-teeth-material-cast-iron-sku-10715700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 50 teeth material steel SKU: 10715000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-50-teeth-material-steel-sku-10715000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 48 teeth material steel SKU: 10714800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-48-teeth-material-steel-sku-10714800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 45 teeth material cast iron SKU: 10714500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-45-teeth-material-cast-iron-sku-10714500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 40 teeth material steel SKU: 10714000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-40-teeth-material-steel-sku-10714000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 38 teeth material steel SKU: 10713800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-38-teeth-material-steel-sku-10713800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 36 teeth material steel SKU: 10713600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-36-teeth-material-steel-sku-10713600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 35 teeth material steel SKU: 10713500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-35-teeth-material-steel-sku-10713500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 34 teeth material steel SKU: 10713400](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-34-teeth-material-steel-sku-10713400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 32 teeth material steel SKU: 10713200](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-32-teeth-material-steel-sku-10713200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 30 teeth material steel SKU: 10713000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-30-teeth-material-steel-sku-10713000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 28 teeth material steel SKU: 10712800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-28-teeth-material-steel-sku-10712800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 27 teeth material steel SKU: 10712700](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-27-teeth-material-steel-sku-10712700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 26 teeth material steel SKU: 10712600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-26-teeth-material-steel-sku-10712600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 25 teeth material steel SKU: 10712500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-25-teeth-material-steel-sku-10712500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 24 teeth material steel SKU: 10712400](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-24-teeth-material-steel-sku-10712400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 23 teeth material steel SKU: 10712300](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-23-teeth-material-steel-sku-10712300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 22 teeth material steel SKU: 10712200](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-22-teeth-material-steel-sku-10712200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 21 teeth material steel SKU: 10712100](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-21-teeth-material-steel-sku-10712100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 20 teeth material steel SKU: 10712000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-20-teeth-material-steel-sku-10712000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 19 teeth material steel SKU: 10711900](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-19-teeth-material-steel-sku-10711900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 18 teeth material steel SKU: 10711800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-18-teeth-material-steel-sku-10711800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 17 teeth material steel SKU: 10711700](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-17-teeth-material-steel-sku-10711700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 16 teeth material steel SKU: 10711600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-16-teeth-material-steel-sku-10711600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 15 teeth material steel SKU: 10711500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-15-teeth-material-steel-sku-10711500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 14 teeth material steel SKU: 10711400](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-14-teeth-material-steel-sku-10711400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 13 teeth material steel SKU: 10711300](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-13-teeth-material-steel-sku-10711300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 12 teeth material steel SKU: 10711200](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-12-teeth-material-steel-sku-10711200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 11 teeth material steel SKU: 10711100](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-11-teeth-material-steel-sku-10711100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 10 teeth material steel SKU: 10711000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-10-teeth-material-steel-sku-10711000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 9 teeth material steel SKU: 10710900](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-9-teeth-material-steel-sku-10710900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 8 teeth material steel SKU: 10710800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-8-teeth-material-steel-sku-10710800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699130](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699125](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Flexible coupling EL size 20 nominal torque 40Nm double-length version pilot bore length 110mm outer diameter 45mm SKU: 60204200](https://maedler.in/product/flexible-coupling-el-size-20-nominal-torque-40nm-double-length-version-pilot-bore-length-110mm-outer-diameter-45mm-sku-60204200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 20 nominal torque 40Nm long version pilot bore length 95mm outer diameter 45mm SKU: 60204100](https://maedler.in/product/flexible-coupling-el-size-20-nominal-torque-40nm-long-version-pilot-bore-length-95mm-outer-diameter-45mm-sku-60204100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 20 nominal torque 40Nm short version pilot bore length 80mm outer diameter 45mm SKU: 60204000](https://maedler.in/product/flexible-coupling-el-size-20-nominal-torque-40nm-short-version-pilot-bore-length-80mm-outer-diameter-45mm-sku-60204000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 19 nominal torque 20Nm double-length version pilot bore length 90mm outer diameter 38mm SKU: 60202500](https://maedler.in/product/flexible-coupling-el-size-19-nominal-torque-20nm-double-length-version-pilot-bore-length-90mm-outer-diameter-38mm-sku-60202500/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 19 nominal torque 20Nm long version pilot bore length 80mm outer diameter 38mm SKU: 60202400](https://maedler.in/product/flexible-coupling-el-size-19-nominal-torque-20nm-long-version-pilot-bore-length-80mm-outer-diameter-38mm-sku-60202400/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 19 nominal torque 20Nm short version pilot bore length 65mm outer diameter 38mm SKU: 60202300](https://maedler.in/product/flexible-coupling-el-size-19-nominal-torque-20nm-short-version-pilot-bore-length-65mm-outer-diameter-38mm-sku-60202300/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 16 nominal torque 20Nm double-length version pilot bore length 90mm outer diameter 35mm SKU: 60202200](https://maedler.in/product/flexible-coupling-el-size-16-nominal-torque-20nm-double-length-version-pilot-bore-length-90mm-outer-diameter-35mm-sku-60202200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 16 nominal torque 20Nm long version pilot bore length 80mm outer diameter 35mm SKU: 60202100](https://maedler.in/product/flexible-coupling-el-size-16-nominal-torque-20nm-long-version-pilot-bore-length-80mm-outer-diameter-35mm-sku-60202100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 16 nominal torque 20Nm short version pilot bore length 65mm outer diameter 35mm SKU: 60202000](https://maedler.in/product/flexible-coupling-el-size-16-nominal-torque-20nm-short-version-pilot-bore-length-65mm-outer-diameter-35mm-sku-60202000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 6 nominal torque 2.5Nm double-length version pilot bore length 35mm outer diameter 17mm SKU: 60201800](https://maedler.in/product/flexible-coupling-el-size-6-nominal-torque-2-5nm-double-length-version-pilot-bore-length-35mm-outer-diameter-17mm-sku-60201800/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 6 nominal torque 2.5Nm long version pilot bore length 30mm outer diameter 17mm SKU: 60201700](https://maedler.in/product/flexible-coupling-el-size-6-nominal-torque-2-5nm-long-version-pilot-bore-length-30mm-outer-diameter-17mm-sku-60201700/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 6 nominal torque 2.5Nm short version pilot bore length 25mm outer diameter 17mm SKU: 60201600](https://maedler.in/product/flexible-coupling-el-size-6-nominal-torque-2-5nm-short-version-pilot-bore-length-25mm-outer-diameter-17mm-sku-60201600/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 14 nominal torque 10Nm double-length version pilot bore length 70mm outer diameter 30mm SKU: 60201500](https://maedler.in/product/flexible-coupling-el-size-14-nominal-torque-10nm-double-length-version-pilot-bore-length-70mm-outer-diameter-30mm-sku-60201500/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 14 nominal torque 10Nm long version pilot bore length 60mm outer diameter 30mm SKU: 60201400](https://maedler.in/product/flexible-coupling-el-size-14-nominal-torque-10nm-long-version-pilot-bore-length-60mm-outer-diameter-30mm-sku-60201400/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 14 nominal torque 10Nm short version pilot bore length 50mm outer diameter 30mm SKU: 60201300](https://maedler.in/product/flexible-coupling-el-size-14-nominal-torque-10nm-short-version-pilot-bore-length-50mm-outer-diameter-30mm-sku-60201300/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 12 nominal torque 10Nm double-length version pilot bore length 70mm outer diameter 26mm SKU: 60201200](https://maedler.in/product/flexible-coupling-el-size-12-nominal-torque-10nm-double-length-version-pilot-bore-length-70mm-outer-diameter-26mm-sku-60201200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 12 nominal torque 10Nm long version pilot bore length 60mm outer diameter 26mm SKU: 60201100](https://maedler.in/product/flexible-coupling-el-size-12-nominal-torque-10nm-long-version-pilot-bore-length-60mm-outer-diameter-26mm-sku-60201100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 12 nominal torque 10Nm short version pilot bore length 50mm outer diameter 26mm SKU: 60201000](https://maedler.in/product/flexible-coupling-el-size-12-nominal-torque-10nm-short-version-pilot-bore-length-50mm-outer-diameter-26mm-sku-60201000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 8 nominal torque 5Nm double-length version pilot bore length 50mm outer diameter 21mm SKU: 60200700](https://maedler.in/product/flexible-coupling-el-size-8-nominal-torque-5nm-double-length-version-pilot-bore-length-50mm-outer-diameter-21mm-sku-60200700/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 8 nominal torque 5Nm long version pilot bore length 45mm outer diameter 21mm SKU: 60200600](https://maedler.in/product/flexible-coupling-el-size-8-nominal-torque-5nm-long-version-pilot-bore-length-45mm-outer-diameter-21mm-sku-60200600/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 8 nominal torque 5Nm short version pilot bore length 35mm outer diameter 21mm SKU: 60200500](https://maedler.in/product/flexible-coupling-el-size-8-nominal-torque-5nm-short-version-pilot-bore-length-35mm-outer-diameter-21mm-sku-60200500/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EK nominal torque 1.5Nm with pilot bore overall length 50mm outer diameter 26mm SKU: 60200200](https://maedler.in/product/flexible-coupling-ek-nominal-torque-1-5nm-with-pilot-bore-overall-length-50mm-outer-diameter-26mm-sku-60200200/): Material: Hubs made of zinc diecast, Spring: Spring steel type C zinc-plated. These couplings are elastic all-metal couplings, with hubs and spring bodies made of rustproof metal. The couplings only have a one-layer spring body. They are, however, flexible in all directions, suitable for both rotational directions and maintenance-free. They are locked against rotation with allen set screws. Temperature range from -40°C to +120°C. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EK nominal torque 0.5Nm with pilot bore overall length 35mm outer diameter 16mm SKU: 60200100](https://maedler.in/product/flexible-coupling-ek-nominal-torque-0-5nm-with-pilot-bore-overall-length-35mm-outer-diameter-16mm-sku-60200100/): Material: Hubs made of zinc diecast, Spring: Spring steel type C zinc-plated. These couplings are elastic all-metal couplings, with hubs and spring bodies made of rustproof metal. The couplings only have a one-layer spring body. They are, however, flexible in all directions, suitable for both rotational directions and maintenance-free. They are locked against rotation with allen set screws. Temperature range from -40°C to +120°C. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EK nominal torque 0.15Nm with pilot bore overall length 25mm outer diameter 12mm SKU: 60200000](https://maedler.in/product/flexible-coupling-ek-nominal-torque-0-15nm-with-pilot-bore-overall-length-25mm-outer-diameter-12mm-sku-60200000/): Material: Hubs made of zinc diecast, Spring: Spring steel type C zinc-plated. These couplings are elastic all-metal couplings, with hubs and spring bodies made of rustproof metal. The couplings only have a one-layer spring body. They are, however, flexible in all directions, suitable for both rotational directions and maintenance-free. They are locked against rotation with allen set screws. Temperature range from -40°C to +120°C. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Torsionally-stiff coupling HFD with through hole bore 20mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199424](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-20mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199424/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199422](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199422/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199420](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199420/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199418](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199418/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199416](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199416/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199415](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199415/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199413](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199413/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199412](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199412/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199411](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199411/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199409](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199409/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199408](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199408/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199407](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199407/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 20mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199320](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-20mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199320/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199319](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199319/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199318](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199318/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199315](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199315/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199313](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199313/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199312](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199312/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199310](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199310/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199309](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199309/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199308](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199308/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199307](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199307/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199306](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199306/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199305](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199305/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Membrane coupling MEM with clamping hub bore both sides 28mm max. torque 60Nm SKU: 60173000](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-28mm-max-torque-60nm-sku-60173000/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 20mm max. torque 60Nm SKU: 60172900](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-20mm-max-torque-60nm-sku-60172900/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 20mm max. torque 30Nm SKU: 60172600](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-20mm-max-torque-30nm-sku-60172600/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 16mm max. torque 30Nm SKU: 60172500](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-16mm-max-torque-30nm-sku-60172500/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 16mm max. torque 11.3Nm SKU: 60172100](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-16mm-max-torque-11-3nm-sku-60172100/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 14mm max. torque 11.3Nm SKU: 60172000](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-14mm-max-torque-11-3nm-sku-60172000/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 12mm max. torque 11.3Nm SKU: 60171900](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-12mm-max-torque-11-3nm-sku-60171900/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 10mm max. torque 5.6Nm SKU: 60171500](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-10mm-max-torque-5-6nm-sku-60171500/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 8mm max. torque 5.6Nm SKU: 60171400](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-8mm-max-torque-5-6nm-sku-60171400/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 6mm max. torque 5.6Nm SKU: 60171300](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-6mm-max-torque-5-6nm-sku-60171300/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 8mm max. torque 2.3Nm SKU: 60170900](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-8mm-max-torque-2-3nm-sku-60170900/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 6mm max. torque 2.3Nm SKU: 60170800](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-6mm-max-torque-2-3nm-sku-60170800/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 5mm max. torque 2.3Nm SKU: 60170700](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-5mm-max-torque-2-3nm-sku-60170700/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 6mm max. torque 0.9Nm SKU: 60170300](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-6mm-max-torque-0-9nm-sku-60170300/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 4mm max. torque 0.9Nm SKU: 60170100](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-4mm-max-torque-0-9nm-sku-60170100/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 35mm overall length 89mm hub diameter 66mm SKU: 60166635](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-35mm-overall-length-89mm-hub-diameter-66mm-sku-60166635/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 32mm overall length 89mm hub diameter 66mm SKU: 60166632](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-32mm-overall-length-89mm-hub-diameter-66mm-sku-60166632/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 28mm overall length 89mm hub diameter 66mm SKU: 60166628](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-28mm-overall-length-89mm-hub-diameter-66mm-sku-60166628/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 24mm overall length 89mm hub diameter 66mm SKU: 60166624](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-24mm-overall-length-89mm-hub-diameter-66mm-sku-60166624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 19mm overall length 89mm hub diameter 66mm SKU: 60166619](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-19mm-overall-length-89mm-hub-diameter-66mm-sku-60166619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 14mm overall length 89mm hub diameter 66mm SKU: 60166614](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-14mm-overall-length-89mm-hub-diameter-66mm-sku-60166614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 25mm overall length 73mm hub diameter 56mm SKU: 60165625](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-25mm-overall-length-73mm-hub-diameter-56mm-sku-60165625/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 24mm overall length 73mm hub diameter 56mm SKU: 60165624](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-24mm-overall-length-73mm-hub-diameter-56mm-sku-60165624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 19mm overall length 73mm hub diameter 56mm SKU: 60165619](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-19mm-overall-length-73mm-hub-diameter-56mm-sku-60165619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 14mm overall length 73mm hub diameter 56mm SKU: 60165614](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-14mm-overall-length-73mm-hub-diameter-56mm-sku-60165614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 11mm overall length 73mm hub diameter 56mm SKU: 60165611](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-11mm-overall-length-73mm-hub-diameter-56mm-sku-60165611/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 10mm overall length 73mm hub diameter 56mm SKU: 60165610](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-10mm-overall-length-73mm-hub-diameter-56mm-sku-60165610/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 25mm overall length 71mm hub diameter 45mm SKU: 60164625](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-25mm-overall-length-71mm-hub-diameter-45mm-sku-60164625/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 24mm overall length 71mm hub diameter 45mm SKU: 60164624](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-24mm-overall-length-71mm-hub-diameter-45mm-sku-60164624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 19mm overall length 71mm hub diameter 45mm SKU: 60164619](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-19mm-overall-length-71mm-hub-diameter-45mm-sku-60164619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 14mm overall length 71mm hub diameter 45mm SKU: 60164614](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-14mm-overall-length-71mm-hub-diameter-45mm-sku-60164614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 11mm overall length 71mm hub diameter 45mm SKU: 60164611](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-11mm-overall-length-71mm-hub-diameter-45mm-sku-60164611/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 10mm overall length 71mm hub diameter 45mm SKU: 60164610](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-10mm-overall-length-71mm-hub-diameter-45mm-sku-60164610/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 20mm overall length 71.4mm hub diameter 37.4mm SKU: 60163720](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-20mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163720/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 18mm overall length 71.4mm hub diameter 37.4mm SKU: 60163718](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-18mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163718/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 16mm overall length 71.4mm hub diameter 37.4mm SKU: 60163716](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-16mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163716/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 14mm overall length 71.4mm hub diameter 37.4mm SKU: 60163714](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-14mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163714/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 12mm overall length 71.4mm hub diameter 37.4mm SKU: 60163712](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-12mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163712/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 10mm overall length 71.4mm hub diameter 37.4mm SKU: 60163710](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-10mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163710/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 16mm overall length 57mm hub diameter 31.0mm SKU: 60163116](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-16mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163116/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 14mm overall length 57mm hub diameter 31.0mm SKU: 60163114](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-14mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163114/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 12mm overall length 57mm hub diameter 31.0mm SKU: 60163112](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-12mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163112/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 10mm overall length 57mm hub diameter 31.0mm SKU: 60163110](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-10mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163110/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 8mm overall length 57mm hub diameter 31.0mm SKU: 60163108](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-8mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163108/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1.6Nm both sides bore 12mm overall length 54.3mm hub diameter 23.4mm SKU: 60162312](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1-6nm-both-sides-bore-12mm-overall-length-54-3mm-hub-diameter-23-4mm-sku-60162312/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1.6Nm both sides bore 10mm overall length 54.3mm hub diameter 23.4mm SKU: 60162310](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1-6nm-both-sides-bore-10mm-overall-length-54-3mm-hub-diameter-23-4mm-sku-60162310/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1.6Nm both sides bore 8mm overall length 54.3mm hub diameter 23.4mm SKU: 60162308](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1-6nm-both-sides-bore-8mm-overall-length-54-3mm-hub-diameter-23-4mm-sku-60162308/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1.6Nm both sides bore 6mm overall length 54.3mm hub diameter 23.4mm SKU: 60162306](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1-6nm-both-sides-bore-6mm-overall-length-54-3mm-hub-diameter-23-4mm-sku-60162306/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 8mm overall length 45.2mm hub diameter 18.2mm SKU: 60161808](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-8mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161808/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 6mm overall length 45.2mm hub diameter 18.2mm SKU: 60161806](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-6mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161806/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 5mm overall length 45.2mm hub diameter 18.2mm SKU: 60161805](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-5mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161805/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 4mm overall length 45.2mm hub diameter 18.2mm SKU: 60161804](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-4mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161804/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781828](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781828/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781825](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781825/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781742](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781742/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781740](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781740/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781738](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781738/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781735](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781735/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781732](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781732/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781730](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781730/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781728](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781728/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781725](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781725/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781640](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781640/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781638](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781638/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781635](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781635/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781632](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781632/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781630](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781630/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781628](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781628/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781625](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781625/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781624](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781624/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781622](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781622/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781620](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781620/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781619](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781619/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781540](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781540/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781538](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781538/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781535](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781532](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781530](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781528](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781525](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781524](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781522](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781520](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781519](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781440](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781440/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781438](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781438/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781435](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781435/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781432](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781430](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781428](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781425](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781424](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781424/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781422](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781422/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781420](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781419](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781338](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781338/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781335](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781335/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781332](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781330](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781328](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781325](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781324](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781322](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781320](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781319](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781235](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781235/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781232](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781230](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781228](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781225](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781224](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781222](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781220](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781219](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781132](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781132/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781130](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781128](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781125](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781124](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781120](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781119](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781032](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781032/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781030](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781028](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781025](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781024](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781020](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781019](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRTG 12 B-1 3/4x7/16" 30 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778130](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 28 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778128](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 27 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778127](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 26 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778126](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 25 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778125](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 24 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778124](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 23 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778123](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 22 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778122](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 21 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778121](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 20 teeth material steel teeth hardened for taper bush type 2012 SKU: 10778120](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10778120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 19 teeth material steel teeth hardened for taper bush type 2012 SKU: 10778119](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10778119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 18 teeth material steel teeth hardened for taper bush type 2012 SKU: 10778118](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10778118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 17 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778117](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 16 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778116](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 15 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778115](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 14 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778114](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-14-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778114/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 13 teeth material steel teeth hardened for taper bush type 1210 SKU: 10778113](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10778113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 95 teeth material cast iron for taper bush type 2525 SKU: 10777188G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-2525-sku-10777188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 95 teeth material cast iron for taper bush type 2517 SKU: 10777183G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 76 teeth material cast iron for taper bush type 2517 SKU: 10777176G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-76-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 57 teeth material cast iron for taper bush type 2517 SKU: 10777157G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-57-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 57 teeth material steel for taper bush type 2517 SKU: 10777157](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-57-teeth-material-steel-for-taper-bush-type-2517-sku-10777157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 45 teeth material cast iron for taper bush type 2517 SKU: 10777145G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-45-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777145g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 45 teeth material steel for taper bush type 2517 SKU: 10777145](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-45-teeth-material-steel-for-taper-bush-type-2517-sku-10777145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Beam coupling LA made from stainless steel max. torque 1.5Nm overall length 19.55mm outer diameter 9.52mm both sides bore 4mm SKU: 60299802](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-1-5nm-overall-length-19-55mm-outer-diameter-9-52mm-both-sides-bore-4mm-sku-60299802/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 0.9 Nm overall length 19.55mm outer diameter 9.52mm both sides bore 3mm SKU: 60299800](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-0-9-nm-overall-length-19-55mm-outer-diameter-9-52mm-both-sides-bore-3mm-sku-60299800/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling KA made from stainless steel max. torque 10.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 16mm SKU: 60299634](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-10-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60299634/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 10.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 12mm SKU: 60299632](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-10-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60299632/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 10.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 10mm SKU: 60299630](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-10-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60299630/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 6.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 10mm SKU: 60299628](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-6-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-10mm-sku-60299628/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 6.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 8mm SKU: 60299626](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-6-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-8mm-sku-60299626/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 6.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 6mm SKU: 60299624](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-6-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-6mm-sku-60299624/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 2.7 Nm overall length 22.85mm outer diameter 19.05mm both sides bore 8mm SKU: 60299622](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-2-7-nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60299622/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 2.7 Nm overall length 22.85mm outer diameter 19.05mm both sides bore 6mm SKU: 60299620](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-2-7-nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60299620/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.8 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 6mm SKU: 60299616](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-8-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60299616/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.8 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 5mm SKU: 60299614](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-8-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60299614/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.8 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 4mm SKU: 60299612](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-8-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-4mm-sku-60299612/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.0 Nm overall length 19.05mm outer diameter 12.70mm both sides bore 6mm SKU: 60299610](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-0-nm-overall-length-19-05mm-outer-diameter-12-70mm-both-sides-bore-6mm-sku-60299610/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.0 Nm overall length 19.05mm outer diameter 12.70mm both sides bore 4mm SKU: 60299608](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-0-nm-overall-length-19-05mm-outer-diameter-12-70mm-both-sides-bore-4mm-sku-60299608/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 0.5 Nm overall length 14.2mm outer diameter 9.52mm both sides bore 3mm SKU: 60299602](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-0-5-nm-overall-length-14-2mm-outer-diameter-9-52mm-both-sides-bore-3mm-sku-60299602/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 0.45 Nm overall length 12.7mm Aussen-Ø 6.35mm both sides bore 2mm type with setscrews SKU: 60299600](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-0-45-nm-overall-length-12-7mm-aussen-o-6-35mm-both-sides-bore-2mm-type-with-setscrews-sku-60299600/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Flexible coupling EL size 28 nominal torque 90 Nm short version pilot bore stainless steel 1.4305 length 100mm outer diameter 55mm SKU: 60299110](https://maedler.in/product/flexible-coupling-el-size-28-nominal-torque-90-nm-short-version-pilot-bore-stainless-steel-1-4305-length-100mm-outer-diameter-55mm-sku-60299110/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 25 nominal torque 90 Nm short version pilot bore stainless steel 1.4305 length 100mm outer diameter 55mm SKU: 60299090](https://maedler.in/product/flexible-coupling-el-size-25-nominal-torque-90-nm-short-version-pilot-bore-stainless-steel-1-4305-length-100mm-outer-diameter-55mm-sku-60299090/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 24 nominal torque 40 Nm short version pilot bore stainless steel 1.4305 length 80mm outer diameter 48mm SKU: 60299043](https://maedler.in/product/flexible-coupling-el-size-24-nominal-torque-40-nm-short-version-pilot-bore-stainless-steel-1-4305-length-80mm-outer-diameter-48mm-sku-60299043/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 20 nominal torque 40 Nm short version pilot bore stainless steel 1.4305 length 80mm outer diameter 45mm SKU: 60299040](https://maedler.in/product/flexible-coupling-el-size-20-nominal-torque-40-nm-short-version-pilot-bore-stainless-steel-1-4305-length-80mm-outer-diameter-45mm-sku-60299040/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 19 nominal torque 20 Nm short version pilot bore stainless steel 1.4305 length 65mm outer diameter 38mm SKU: 60299023](https://maedler.in/product/flexible-coupling-el-size-19-nominal-torque-20-nm-short-version-pilot-bore-stainless-steel-1-4305-length-65mm-outer-diameter-38mm-sku-60299023/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 16 nominal torque 20Nm short version pilot bore stainless steel 1.4305 length 65mm outer diameter 35mm SKU: 60299020](https://maedler.in/product/flexible-coupling-el-size-16-nominal-torque-20nm-short-version-pilot-bore-stainless-steel-1-4305-length-65mm-outer-diameter-35mm-sku-60299020/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 6 nominal torque 2.5Nm short version pilot bore stainless steel 1.4305 length 25mm outer diameter 17mm SKU: 60299016](https://maedler.in/product/flexible-coupling-el-size-6-nominal-torque-2-5nm-short-version-pilot-bore-stainless-steel-1-4305-length-25mm-outer-diameter-17mm-sku-60299016/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 14 nominal torque 10Nm short version pilot bore stainless steel 1.4305 length 50mm outer diameter 30mm SKU: 60299013](https://maedler.in/product/flexible-coupling-el-size-14-nominal-torque-10nm-short-version-pilot-bore-stainless-steel-1-4305-length-50mm-outer-diameter-30mm-sku-60299013/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 12 nominal torque 10 Nm short version pilot bore stainless steel 1.4305 length 50mm outer diameter 26mm SKU: 60299010](https://maedler.in/product/flexible-coupling-el-size-12-nominal-torque-10-nm-short-version-pilot-bore-stainless-steel-1-4305-length-50mm-outer-diameter-26mm-sku-60299010/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 8 nominal torque 5Nm short version pilot bore stainless steel 1.4305 length 35mm outer diameter 21mm SKU: 60299005](https://maedler.in/product/flexible-coupling-el-size-8-nominal-torque-5nm-short-version-pilot-bore-stainless-steel-1-4305-length-35mm-outer-diameter-21mm-sku-60299005/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Beam coupling LA made from aluminium max. torque 55Nm overall length 130mm outer diameter 57.15m both sides bore 30mm SKU: 60296800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-55nm-overall-length-130mm-outer-diameter-57-15m-both-sides-bore-30mm-sku-60296800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 55Nm overall length 130mm outer diameter 57.15mm both sides bore 24mm SKU: 60296600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-55nm-overall-length-130mm-outer-diameter-57-15mm-both-sides-bore-24mm-sku-60296600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 40Nm overall length 95.30mm outer diameter 50.8mm both sides bore 24mm SKU: 60296200](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-40nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-24mm-sku-60296200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 40Nm overall length 95.30mm outer diameter 50.8mm both sides bore 19mm SKU: 60296000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-40nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-19mm-sku-60296000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 40Nm overall length 95.30mm outer diameter 50.8mm both sides bore 16mm SKU: 60295800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-40nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-16mm-sku-60295800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 30Nm overall length 76.20mm outer diameter 44.45mm both sides bore 19mm SKU: 60295600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-30nm-overall-length-76-20mm-outer-diameter-44-45mm-both-sides-bore-19mm-sku-60295600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 30Nm overall length 76.20mm outer diameter 44.45mm both sides bore 16mm SKU: 60295400](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-30nm-overall-length-76-20mm-outer-diameter-44-45mm-both-sides-bore-16mm-sku-60295400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 22Nm overall length 66.67mm outer diameter 38.1mm both sides bore 19mm SKU: 60295000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-22nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-19mm-sku-60295000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 22Nm overall length 66.67mm outer diameter 38.1mm both sides bore 16mm SKU: 60294800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-22nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-16mm-sku-60294800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 22Nm overall length 66.67mm outer diameter 38.1mm both sides bore 12mm SKU: 60294600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-22nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-12mm-sku-60294600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 15Nm overall length 57.15mm outer diameter 31.75mm both sides bore 16mm SKU: 60294400](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-15nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60294400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 15Nm overall length 57.15mm outer diameter 31.75mm both sides bore 12mm SKU: 60294200](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-15nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60294200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 15Nm overall length 57.15mm outer diameter 31.75mm both sides bore 10mm SKU: 60294000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-15nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60294000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 10Nm overall length 38.10mm outer diameter 25.4mm both sides bore 10mm SKU: 60293800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-10nm-overall-length-38-10mm-outer-diameter-25-4mm-both-sides-bore-10mm-sku-60293800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 10Nm overall length 38.10mm outer diameter 25.4mm both sides bore 8mm SKU: 60293600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-10nm-overall-length-38-10mm-outer-diameter-25-4mm-both-sides-bore-8mm-sku-60293600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 5 Nm overall length 38.10mm outer diameter 25.4mm both sides bore 6mm SKU: 60293400](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-5-nm-overall-length-38-10mm-outer-diameter-25-4mm-both-sides-bore-6mm-sku-60293400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 5.3Nm overall length 26.50mm outer diameter 19.05mm both sides bore 8mm SKU: 60292600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-5-3nm-overall-length-26-50mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60292600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 3 Nm overall length 26.50mm outer diameter 19.05mm both sides bore 6mm SKU: 60292400](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-3-nm-overall-length-26-50mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60292400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 3.4Nm overall length 25.40mm outer diameter 15.87mm both sides bore 6mm SKU: 60292000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-3-4nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60292000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 2 Nm overall length 25.40mm outer diameter 15.87mm both sides bore 5mm SKU: 60291800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-2-nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60291800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 2 Nm overall length 25.40mm outer diameter 15.87mm both sides bore 4mm SKU: 60291600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-2-nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-4mm-sku-60291600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 2Nm overall length 22.85mm outer diameter 12.7mm both sides bore 6mm SKU: 60290800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-2nm-overall-length-22-85mm-outer-diameter-12-7mm-both-sides-bore-6mm-sku-60290800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 1.3 Nm overall length 22.85mm outer diameter 12.7mm both sides bore 4mm SKU: 60290600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-1-3-nm-overall-length-22-85mm-outer-diameter-12-7mm-both-sides-bore-4mm-sku-60290600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 1Nm overall length 19.55mm outer diameter 9.52mm both sides bore 4mm SKU: 60290200](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-1nm-overall-length-19-55mm-outer-diameter-9-52mm-both-sides-bore-4mm-sku-60290200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 1Nm overall length 19.55mm outer diameter 9.52mm both sides bore 3mm SKU: 60290000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-1nm-overall-length-19-55mm-outer-diameter-9-52mm-both-sides-bore-3mm-sku-60290000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 16mm SKU: 60273400](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-6-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60273400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 12mm SKU: 60273200](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-6-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60273200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 10mm SKU: 60273000](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-6-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60273000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 4.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 10mm SKU: 60272800](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-4-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-10mm-sku-60272800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 4.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 8mm SKU: 60272600](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-4-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-8mm-sku-60272600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 4.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 6mm SKU: 60272400](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-4-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-6mm-sku-60272400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 2.5 Nm overall length 22.85mm outer diameter 19.05mm both sides bore 8mm SKU: 60272200](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-2-5-nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60272200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 2.5 Nm overall length 22.85mm outer diameter 19.05mm both sides bore 6mm SKU: 60272000](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-2-5-nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60272000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 1.5 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 6mm SKU: 60271600](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-1-5-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60271600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 1.5 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 5mm SKU: 60271400](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-1-5-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60271400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 1.5 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 4mm SKU: 60271200](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-1-5-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-4mm-sku-60271200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 0.9 Nm overall length 19.05mm outer diameter 12.70mm both sides bore 6mm SKU: 60271000](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-0-9-nm-overall-length-19-05mm-outer-diameter-12-70mm-both-sides-bore-6mm-sku-60271000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 0.9 Nm overall length 19.05mm outer diameter 12.70mm both sides bore 4mm SKU: 60270800](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-0-9-nm-overall-length-19-05mm-outer-diameter-12-70mm-both-sides-bore-4mm-sku-60270800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 0.4 Nm overall length 14.2mm outer diameter 9.52mm both sides bore 3mm SKU: 60270200](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-0-4-nm-overall-length-14-2mm-outer-diameter-9-52mm-both-sides-bore-3mm-sku-60270200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from plastic max. torque 2.5Nm overall length 44.45mm outer diameter 31.75mm both sides bore 16mm SKU: 60263400](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-2-5nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60263400/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 2.5Nm overall length 44.45mm outer diameter 31.75mm both sides bore 12mm SKU: 60263200](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-2-5nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60263200/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 2.5Nm overall length 44.45mm outer diameter 31.75mm both sides bore 10mm SKU: 60263000](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-2-5nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60263000/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 1.4Nm overall length 31.75mm outer diameter 25.40mm both sides bore 10mm SKU: 60262800](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-1-4nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-10mm-sku-60262800/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 1.4Nm overall length 31.75mm outer diameter 25.40mm both sides bore 8mm SKU: 60262600](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-1-4nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-8mm-sku-60262600/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 1.4Nm overall length 31.75mm outer diameter 25.40mm both sides bore 6mm SKU: 60262400](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-1-4nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-6mm-sku-60262400/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.64Nm overall length 22.85mm outer diameter 19.05mm both sides bore 8mm SKU: 60262200](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-64nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60262200/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.64Nm overall length 22.85mm outer diameter 19.05mm both sides bore 6mm SKU: 60262000](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-64nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60262000/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.35Nm overall length 20.03mm outer diameter 15.87mm both sides bore 6mm SKU: 60261600](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-35nm-overall-length-20-03mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60261600/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.35Nm overall length 20.03mm outer diameter 15.87mm both sides bore 5mm SKU: 60261400](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-35nm-overall-length-20-03mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60261400/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.35Nm overall length 20.03mm outer diameter 15.87mm both sides bore 4mm SKU: 60261200](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-35nm-overall-length-20-03mm-outer-diameter-15-87mm-both-sides-bore-4mm-sku-60261200/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.24Nm overall length 19.05mm outer diameter 12.7mm both sides bore 6mm SKU: 60261000](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-24nm-overall-length-19-05mm-outer-diameter-12-7mm-both-sides-bore-6mm-sku-60261000/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.24Nm overall length 19.05mm outer diameter 12.7mm both sides bore 4mm SKU: 60260800](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-24nm-overall-length-19-05mm-outer-diameter-12-7mm-both-sides-bore-4mm-sku-60260800/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Flexible coupling EL size 50 nominal torque 500Nm double-length version pilot bore length 300mm, outer diameter 100mm SKU: 60250200](https://maedler.in/product/flexible-coupling-el-size-50-nominal-torque-500nm-double-length-version-pilot-bore-length-300mm-outer-diameter-100mm-sku-60250200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 50 nominal torque 500Nm long version pilot bore length 250mm outer diameter 100mm SKU: 60250100](https://maedler.in/product/flexible-coupling-el-size-50-nominal-torque-500nm-long-version-pilot-bore-length-250mm-outer-diameter-100mm-sku-60250100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 50 nominal torque 500Nm short version pilot bore length 210mm outer diameter 100mm SKU: 60250000](https://maedler.in/product/flexible-coupling-el-size-50-nominal-torque-500nm-short-version-pilot-bore-length-210mm-outer-diameter-100mm-sku-60250000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 40 nominal torque 300Nm double-length version pilot bore length 240mm outer diameter 80mm SKU: 60230200](https://maedler.in/product/flexible-coupling-el-size-40-nominal-torque-300nm-double-length-version-pilot-bore-length-240mm-outer-diameter-80mm-sku-60230200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 40 nominal torque 300Nm long version pilot bore length 200mm outer diameter 80mm SKU: 60230100](https://maedler.in/product/flexible-coupling-el-size-40-nominal-torque-300nm-long-version-pilot-bore-length-200mm-outer-diameter-80mm-sku-60230100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 40 nominal torque 300Nm short version pilot bore length 170mm outer diameter 80mm SKU: 60230000](https://maedler.in/product/flexible-coupling-el-size-40-nominal-torque-300nm-short-version-pilot-bore-length-170mm-outer-diameter-80mm-sku-60230000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 35 nominal torque 220Nm double-length version pilot bore length 210mm outer diameter 75mm SKU: 60222200](https://maedler.in/product/flexible-coupling-el-size-35-nominal-torque-220nm-double-length-version-pilot-bore-length-210mm-outer-diameter-75mm-sku-60222200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 35 nominal torque 220Nm long version pilot bore length 180mm outer diameter 75mm SKU: 60222100](https://maedler.in/product/flexible-coupling-el-size-35-nominal-torque-220nm-long-version-pilot-bore-length-180mm-outer-diameter-75mm-sku-60222100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 35 nominal torque 220Nm short version pilot bore length 150mm outer diameter 75mm SKU: 60222000](https://maedler.in/product/flexible-coupling-el-size-35-nominal-torque-220nm-short-version-pilot-bore-length-150mm-outer-diameter-75mm-sku-60222000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 30 nominal torque 150Nm double-length version pilot bore length 175mm outer diameter 65mm SKU: 60215200](https://maedler.in/product/flexible-coupling-el-size-30-nominal-torque-150nm-double-length-version-pilot-bore-length-175mm-outer-diameter-65mm-sku-60215200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 30 nominal torque 150Nm long version pilot bore length 150mm outer diameter 65mm SKU: 60215100](https://maedler.in/product/flexible-coupling-el-size-30-nominal-torque-150nm-long-version-pilot-bore-length-150mm-outer-diameter-65mm-sku-60215100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 30 nominal torque 150Nm short version pilot bore length 125mm outer diameter 65mm SKU: 60215000](https://maedler.in/product/flexible-coupling-el-size-30-nominal-torque-150nm-short-version-pilot-bore-length-125mm-outer-diameter-65mm-sku-60215000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 28 nominal torque 90Nm doppellange version pilot bore length 140mm outer diameter 55mm SKU: 60211200](https://maedler.in/product/flexible-coupling-el-size-28-nominal-torque-90nm-doppellange-version-pilot-bore-length-140mm-outer-diameter-55mm-sku-60211200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 28 nominal torque 90Nm long version pilot bore length 120mm outer diameter 55mm SKU: 60211100](https://maedler.in/product/flexible-coupling-el-size-28-nominal-torque-90nm-long-version-pilot-bore-length-120mm-outer-diameter-55mm-sku-60211100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 28 nominal torque 90Nm short version pilot bore length 100mm outer diameter 55mm SKU: 60211000](https://maedler.in/product/flexible-coupling-el-size-28-nominal-torque-90nm-short-version-pilot-bore-length-100mm-outer-diameter-55mm-sku-60211000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 25 nominal torque 90Nm double-length version pilot bore length 140mm outer diameter 55mm SKU: 60209200](https://maedler.in/product/flexible-coupling-el-size-25-nominal-torque-90nm-double-length-version-pilot-bore-length-140mm-outer-diameter-55mm-sku-60209200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 25 nominal torque 90Nm long version pilot bore length 120mm outer diameter 55mm SKU: 60209100](https://maedler.in/product/flexible-coupling-el-size-25-nominal-torque-90nm-long-version-pilot-bore-length-120mm-outer-diameter-55mm-sku-60209100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 25 nominal torque 90Nm short version pilot bore length 100mm outer diameter 55mm SKU: 60209000](https://maedler.in/product/flexible-coupling-el-size-25-nominal-torque-90nm-short-version-pilot-bore-length-100mm-outer-diameter-55mm-sku-60209000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 24 nominal torque 40Nm double-length version pilot bore length 110mm outer diameter 48mm SKU: 60204500](https://maedler.in/product/flexible-coupling-el-size-24-nominal-torque-40nm-double-length-version-pilot-bore-length-110mm-outer-diameter-48mm-sku-60204500/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 24 nominal torque 40Nm long version pilot bore length 95mm outer diameter 48mm SKU: 60204400](https://maedler.in/product/flexible-coupling-el-size-24-nominal-torque-40nm-long-version-pilot-bore-length-95mm-outer-diameter-48mm-sku-60204400/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 24 nominal torque 40Nm short version pilot bore length 80mm outer diameter 48mm SKU: 60204300](https://maedler.in/product/flexible-coupling-el-size-24-nominal-torque-40nm-short-version-pilot-bore-length-80mm-outer-diameter-48mm-sku-60204300/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 24 teeth material steel teeth induction hardened SKU: 10788124](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-24-teeth-material-steel-teeth-induction-hardened-sku-10788124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 23 teeth material steel teeth induction hardened SKU: 10788123](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-23-teeth-material-steel-teeth-induction-hardened-sku-10788123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 22 teeth material steel teeth induction hardened SKU: 10788122](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-22-teeth-material-steel-teeth-induction-hardened-sku-10788122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 21 teeth material steel teeth induction hardened SKU: 10788121](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-21-teeth-material-steel-teeth-induction-hardened-sku-10788121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 20 teeth material steel teeth induction hardened SKU: 10788120](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-20-teeth-material-steel-teeth-induction-hardened-sku-10788120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 19 teeth material steel teeth induction hardened SKU: 10788119](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-19-teeth-material-steel-teeth-induction-hardened-sku-10788119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 18 teeth material steel teeth induction hardened SKU: 10788118](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-18-teeth-material-steel-teeth-induction-hardened-sku-10788118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 17 teeth material steel teeth induction hardened SKU: 10788117](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-17-teeth-material-steel-teeth-induction-hardened-sku-10788117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 16 teeth material steel teeth induction hardened SKU: 10788116](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-16-teeth-material-steel-teeth-induction-hardened-sku-10788116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 15 teeth material steel teeth induction hardened SKU: 10788115](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-15-teeth-material-steel-teeth-induction-hardened-sku-10788115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 14 teeth material steel teeth induction hardened SKU: 10788114](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-14-teeth-material-steel-teeth-induction-hardened-sku-10788114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 13 teeth material steel teeth induction hardened SKU: 10788113](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-13-teeth-material-steel-teeth-induction-hardened-sku-10788113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 12 teeth material steel teeth induction hardened SKU: 10788112](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-12-teeth-material-steel-teeth-induction-hardened-sku-10788112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 11 teeth material steel teeth induction hardened SKU: 10788111](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-11-teeth-material-steel-teeth-induction-hardened-sku-10788111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 10 teeth material steel teeth induction hardened SKU: 10788110](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-10-teeth-material-steel-teeth-induction-hardened-sku-10788110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 9 teeth material steel teeth induction hardened SKU: 10788109](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-9-teeth-material-steel-teeth-induction-hardened-sku-10788109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 8 teeth material steel teeth induction hardened SKU: 10788108](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-8-teeth-material-steel-teeth-induction-hardened-sku-10788108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782550](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782550/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782548](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782548/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782545](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782545/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782542](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782542/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782540](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782540/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782538](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782538/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782535](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782532](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782530](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782528](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782525](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782450](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782450/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782448](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782448/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782445](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782445/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782442](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782442/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782440](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782440/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782438](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782438/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782435](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782435/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782432](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782430](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782428](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782425](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782350](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782350/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782348](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782348/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782345](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782345/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782342](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782342/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782340](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782340/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782338](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782338/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782335](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782335/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782332](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782330](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782328](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782325](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782250](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782250/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782248](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782248/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782245](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782245/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782242](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782242/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782240](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782240/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782238](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782238/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782235](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782235/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782232](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782230](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782228](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782225](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782150](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782150/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782148](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782148/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782145](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782145/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782142](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782142/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782140](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782140/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782138](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782138/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782135](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782135/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782132](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782132/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782130](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782128](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782125](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782050](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782050/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782048](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782048/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782045](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782045/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782042](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782042/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782040](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782040/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782038](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782038/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782035](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782035/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782032](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782032/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782030](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782028](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782025](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781950](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781950/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781948](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781948/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781945](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781945/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781942](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781942/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781940](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781940/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781938](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781938/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781935](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781935/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781932](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781932/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781930](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781930/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781928](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781928/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781925](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781925/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781842](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781842/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781840](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781840/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781838](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781838/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781835](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781835/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781832](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781832/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781830](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781830/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Elastic coupling RNK with clamp hubs backlash-free size 24 boreholes 19mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60542419](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-24-boreholes-19mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60542419/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 24 boreholes 16mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60542416](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-24-boreholes-16mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60542416/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 24 prebore 5mm (no H7) outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60542405](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-24-prebore-5mm-no-h7-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60542405/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 19 boreholes 19mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60541919](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-19-boreholes-19mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60541919/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 19 boreholes 16mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60541916](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-19-boreholes-16mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60541916/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 19 boreholes 14mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60541914](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-19-boreholes-14mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60541914/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 19 prebore 5mm (no H7) outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60541905](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-19-prebore-5mm-no-h7-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60541905/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 14 boreholes 16mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60541416](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-14-boreholes-16mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60541416/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 14 boreholes 14mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60541414](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-14-boreholes-14mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60541414/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 14 boreholes 11mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60541411](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-14-boreholes-11mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60541411/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 14 prebore 3mm (no H7) outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60541403](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-14-prebore-3mm-no-h7-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60541403/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 9 boreholes 11mm outer diameter 20mm overall length 30mm insert 92° shore yellow or white SKU: 60540911](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-9-boreholes-11mm-outer-diameter-20mm-overall-length-30mm-insert-92-shore-yellow-or-white-sku-60540911/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 9 boreholes 10mm outer diameter 20mm overall length 30mm insert 92° shore yellow or white SKU: 60540910](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-9-boreholes-10mm-outer-diameter-20mm-overall-length-30mm-insert-92-shore-yellow-or-white-sku-60540910/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 9 boreholes 9mm outer diameter 20mm overall length 30mm insert 92° shore yellow or white SKU: 60540909](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-9-boreholes-9mm-outer-diameter-20mm-overall-length-30mm-insert-92-shore-yellow-or-white-sku-60540909/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 9 prebore 3mm (no H7) outer diameter 20mm overall length 30mm insert 92° shore yellow or white SKU: 60540903](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-9-prebore-3mm-no-h7-outer-diameter-20mm-overall-length-30mm-insert-92-shore-yellow-or-white-sku-60540903/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 7 boreholes 6mm outer diameter 14mm overall length 22mm insert 92° shore yellow or white SKU: 60540706](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-7-boreholes-6mm-outer-diameter-14mm-overall-length-22mm-insert-92-shore-yellow-or-white-sku-60540706/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 7 max. torque 0.95Nm boreholes 5mm outer diameter 14mm overall length 22mm insert 92° shore yellow or white SKU: 60540705](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-7-max-torque-0-95nm-boreholes-5mm-outer-diameter-14mm-overall-length-22mm-insert-92-shore-yellow-or-white-sku-60540705/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 7 max. torque 0.95Nm prebore 3mm (no H7) outer diameter 14mm overall length 22mm insert 92° shore yellow or white SKU: 60540703](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-7-max-torque-0-95nm-prebore-3mm-no-h7-outer-diameter-14mm-overall-length-22mm-insert-92-shore-yellow-or-white-sku-60540/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 5 boreholes 4mm outer diameter 10mm overall length 15mm insert 92° shore yellow or white SKU: 60540504](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-5-boreholes-4mm-outer-diameter-10mm-overall-length-15mm-insert-92-shore-yellow-or-white-sku-60540504/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 5 boreholes 3mm outer diameter 10mm overall length 15mm insert 92° shore yellow or white SKU: 60540503](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-5-boreholes-3mm-outer-diameter-10mm-overall-length-15mm-insert-92-shore-yellow-or-white-sku-60540503/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 5 prebore 1mm (no H7) outer diameter 10mm overall length 15mm insert 92° shore yellow or white SKU: 60540501](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-5-prebore-1mm-no-h7-outer-diameter-10mm-overall-length-15mm-insert-92-shore-yellow-or-white-sku-60540501/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNG cast iron size 100 max. torque 66000Nm nominal torque 3300Nm outer diameter 225mm length 270mm pre-bored 29mm SKU: 60531100](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-100-max-torque-66000nm-nominal-torque-3300nm-outer-diameter-225mm-length-270mm-pre-bored-29mm-sku-60531100/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 90 max. torque 4800Nm nominal torque 2400Nm outer diameter 200mm length 245mm pre-bored 29mm SKU: 60531000](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-90-max-torque-4800nm-nominal-torque-2400nm-outer-diameter-200mm-length-245mm-pre-bored-29mm-sku-60531000/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 75 max. torque 2560Nm nominal torque 1280Nm outer diameter 160mm length 210mm pre-bored 25mm SKU: 60530900](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-75-max-torque-2560nm-nominal-torque-1280nm-outer-diameter-160mm-length-210mm-pre-bored-25mm-sku-60530900/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 65 max. torque 1250Nm nominal torque 625Nm outer diameter 135mm length 185mm pre-bored 18mm SKU: 60530800](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-65-max-torque-1250nm-nominal-torque-625nm-outer-diameter-135mm-length-185mm-pre-bored-18mm-sku-60530800/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 55 max. torque 820Nm nominal torque 410Nm outer diameter 120mm length 160mm pre-bored 16mm SKU: 60530700](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-55-max-torque-820nm-nominal-torque-410nm-outer-diameter-120mm-length-160mm-pre-bored-16mm-sku-60530700/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 48 max. torque 620Nm nominal torque 310Nm outer diameter 105mm length 140mm pre-bored 16mm SKU: 60530500](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-48-max-torque-620nm-nominal-torque-310nm-outer-diameter-105mm-length-140mm-pre-bored-16mm-sku-60530500/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 42 max. torque 530Nm nominal torque 265Nm outer diameter 95mm length 126mm pre-bored 13mm SKU: 60530400](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-42-max-torque-530nm-nominal-torque-265nm-outer-diameter-95mm-length-126mm-pre-bored-13mm-sku-60530400/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 38 max. torque 380Nm nominal torque 190Nm outer diameter 80mm length 114mm pre-bored 13mm SKU: 60530300](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-38-max-torque-380nm-nominal-torque-190nm-outer-diameter-80mm-length-114mm-pre-bored-13mm-sku-60530300/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 28 max. torque 190Nm nominal torque 95Nm outer diameter 65mm length 90mm pre-bored 9mm SKU: 60530200](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-28-max-torque-190nm-nominal-torque-95nm-outer-diameter-65mm-length-90mm-pre-bored-9mm-sku-60530200/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 24 max. torque 70Nm nominal torque 35Nm outer diameter 55mm length 78mm pre-bored 7mm SKU: 60530100](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-24-max-torque-70nm-nominal-torque-35nm-outer-diameter-55mm-length-78mm-pre-bored-7mm-sku-60530100/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 19 max. torque 20Nm nominal torque 10Nm outer diameter 40mm length 66mm pre-bored 5mm SKU: 60530000](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-19-max-torque-20nm-nominal-torque-10nm-outer-diameter-40mm-length-66mm-pre-bored-5mm-sku-60530000/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling hub RNT size 90 type AS for taper bush 3020 SKU: 60520902](https://maedler.in/product/elastic-coupling-hub-rnt-size-90-type-as-for-taper-bush-3020-sku-60520902/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 90 type IS for taper bush 3020 SKU: 60520901](https://maedler.in/product/elastic-coupling-hub-rnt-size-90-type-is-for-taper-bush-3020-sku-60520901/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 75 type AS for taper bush 2517 SKU: 60520802](https://maedler.in/product/elastic-coupling-hub-rnt-size-75-type-as-for-taper-bush-2517-sku-60520802/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 75 type IS for taper bush 2517 SKU: 60520801](https://maedler.in/product/elastic-coupling-hub-rnt-size-75-type-is-for-taper-bush-2517-sku-60520801/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 65 type AS for taper bush 2012 SKU: 60520702](https://maedler.in/product/elastic-coupling-hub-rnt-size-65-type-as-for-taper-bush-2012-sku-60520702/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 65 type IS for taper bush 2012 SKU: 60520701](https://maedler.in/product/elastic-coupling-hub-rnt-size-65-type-is-for-taper-bush-2012-sku-60520701/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 55 type AS for taper bush 2012 SKU: 60520602](https://maedler.in/product/elastic-coupling-hub-rnt-size-55-type-as-for-taper-bush-2012-sku-60520602/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 55 type IS for taper bush 2012 SKU: 60520601](https://maedler.in/product/elastic-coupling-hub-rnt-size-55-type-is-for-taper-bush-2012-sku-60520601/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 48 type AS for taper bush 1615 SKU: 60520502](https://maedler.in/product/elastic-coupling-hub-rnt-size-48-type-as-for-taper-bush-1615-sku-60520502/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 48 type IS for taper bush 1615 SKU: 60520501](https://maedler.in/product/elastic-coupling-hub-rnt-size-48-type-is-for-taper-bush-1615-sku-60520501/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 48 max. torque 620Nm nominal torque 310Nm outer diameter 105 mm overall length 140 mm with pilot bore insert 92° shore yellow SKU: 60520500](https://maedler.in/product/elastic-coupling-rn-size-48-max-torque-620nm-nominal-torque-310nm-outer-diameter-105-mm-overall-length-140-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520500/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling hub RNT size 42 type AS for taper bush 1610 SKU: 60520402](https://maedler.in/product/elastic-coupling-hub-rnt-size-42-type-as-for-taper-bush-1610-sku-60520402/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 42 type IS for taper bush 1610 SKU: 60520401](https://maedler.in/product/elastic-coupling-hub-rnt-size-42-type-is-for-taper-bush-1610-sku-60520401/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 42 max. torque 530Nm nominal torque 265Nm outer diameter 95 mm overall length 126 mm with pilot bore insert 92° shore yellow SKU: 60520400](https://maedler.in/product/elastic-coupling-rn-size-42-max-torque-530nm-nominal-torque-265nm-outer-diameter-95-mm-overall-length-126-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520400/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling hub RNT size 38 type AS for taper bush 1108 SKU: 60520302](https://maedler.in/product/elastic-coupling-hub-rnt-size-38-type-as-for-taper-bush-1108-sku-60520302/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 38 type IS for taper bush 1108 SKU: 60520301](https://maedler.in/product/elastic-coupling-hub-rnt-size-38-type-is-for-taper-bush-1108-sku-60520301/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 38 max. torque 380Nm nominal torque 190Nm outer diameter 80 mm overall length 114 mm with pilot bore insert 92° shore yellow SKU: 60520300](https://maedler.in/product/elastic-coupling-rn-size-38-max-torque-380nm-nominal-torque-190nm-outer-diameter-80-mm-overall-length-114-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520300/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling hub RNT size 28 type AS for taper bush 1108 SKU: 60520202](https://maedler.in/product/elastic-coupling-hub-rnt-size-28-type-as-for-taper-bush-1108-sku-60520202/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 28 type IS for taper bush 1108 SKU: 60520201](https://maedler.in/product/elastic-coupling-hub-rnt-size-28-type-is-for-taper-bush-1108-sku-60520201/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 28 max. torque 190Nm nominal torque 95Nm outer diameter 65mm overall length 90 mm with pilot bore insert 92° shore yellow SKU: 60520200](https://maedler.in/product/elastic-coupling-rn-size-28-max-torque-190nm-nominal-torque-95nm-outer-diameter-65mm-overall-length-90-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520200/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling hub RNT size 24 type AS for taper bush 1008 SKU: 60520102](https://maedler.in/product/elastic-coupling-hub-rnt-size-24-type-as-for-taper-bush-1008-sku-60520102/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 24 type IS for taper bush 1008 SKU: 60520101](https://maedler.in/product/elastic-coupling-hub-rnt-size-24-type-is-for-taper-bush-1008-sku-60520101/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 24 max. torque 70Nm nominal torque 35 Nm outer diameter 55 mm overall length 78 mm with pilot bore insert 92° shore yellow SKU: 60520100](https://maedler.in/product/elastic-coupling-rn-size-24-max-torque-70nm-nominal-torque-35-nm-outer-diameter-55-mm-overall-length-78-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520100/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling RN size 19 max. torque 20Nm nominal torque 10 Nm outer diameter 40 mm overall length 66 mm with pilot bore insert 92° shore yellow SKU: 60520000](https://maedler.in/product/elastic-coupling-rn-size-19-max-torque-20nm-nominal-torque-10-nm-outer-diameter-40-mm-overall-length-66-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520000/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 14mm width 5mm sealed on both sides SKU: 605-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-14mm-width-5mm-sealed-on-both-sides-sku-605-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Elastic coupling RN size 14 max. torque 15Nm nominal torque 7.5 Nm outer diameter 30 mm overall length 35 mm no bore insert 92° shore yellow SKU: 60519900](https://maedler.in/product/elastic-coupling-rn-size-14-max-torque-15nm-nominal-torque-7-5-nm-outer-diameter-30-mm-overall-length-35-mm-no-bore-insert-92-shore-yellow-sku-60519900/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling RN size 9 max. torque 6Nm nominal torque 2,93 Nm outer diameter 20 mm overall length 30 mm no bore insert 92° shore white or yellow SKU: 60519800](https://maedler.in/product/elastic-coupling-rn-size-9-max-torque-6nm-nominal-torque-293-nm-outer-diameter-20-mm-overall-length-30-mm-no-bore-insert-92-shore-white-or-yellow-sku-60519800/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling RN size 7 max. torque 2,24Nm nominal torque 1,12Nm outer diameter 14 mm overall length 22 mm no bore insert 92° shore white or yellow SKU: 60519700](https://maedler.in/product/elastic-coupling-rn-size-7-max-torque-224nm-nominal-torque-112nm-outer-diameter-14-mm-overall-length-22-mm-no-bore-insert-92-shore-white-or-yellow-sku-60519700/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 14mm width 5mm shielded on both sides SKU: 605-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-14mm-width-5mm-shielded-on-both-sides-sku-605-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 4mm outer diameter 12mm width 4mm sealed on both sides SKU: 604-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-4mm-outer-diameter-12mm-width-4mm-sealed-on-both-sides-sku-604-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Elastic coupling DXA size 100 max. torque 11000Nm nominal torque 5500Nm outer diameter 220mm overall length 250mm with pilot bore SKU: 60410001](https://maedler.in/product/elastic-coupling-dxa-size-100-max-torque-11000nm-nominal-torque-5500nm-outer-diameter-220mm-overall-length-250mm-with-pilot-bore-sku-60410001/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 85 max. torque 6700Nm nominal torque 3350Nm outer diameter 185mm overall length 214mm with pilot bore SKU: 60408501](https://maedler.in/product/elastic-coupling-dxa-size-85-max-torque-6700nm-nominal-torque-3350nm-outer-diameter-185mm-overall-length-214mm-with-pilot-bore-sku-60408501/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 75 max. torque 4900Nm nominal torque 2450Nm outer diameter 165mm overall length 190mm with pilot bore SKU: 60407501](https://maedler.in/product/elastic-coupling-dxa-size-75-max-torque-4900nm-nominal-torque-2450nm-outer-diameter-165mm-overall-length-190mm-with-pilot-bore-sku-60407501/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 65 max. torque 3200Nm nominal torque 1600Nm outer diameter 142mm overall length 165mm with pilot bore SKU: 60406501](https://maedler.in/product/elastic-coupling-dxa-size-65-max-torque-3200nm-nominal-torque-1600nm-outer-diameter-142mm-overall-length-165mm-with-pilot-bore-sku-60406501/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 60 max. torque 2300Nm nominal torque 1150Nm outer diameter 130mm overall length 152mm with pilot bore SKU: 60406001](https://maedler.in/product/elastic-coupling-dxa-size-60-max-torque-2300nm-nominal-torque-1150nm-outer-diameter-130mm-overall-length-152mm-with-pilot-bore-sku-60406001/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 55 max. torque 1760Nm nominal torque 880Nm outer diameter 120mm overall length 140mm with pilot bore SKU: 60405501](https://maedler.in/product/elastic-coupling-dxa-size-55-max-torque-1760nm-nominal-torque-880nm-outer-diameter-120mm-overall-length-140mm-with-pilot-bore-sku-60405501/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 48 max. torque 1300Nm nominal torque 650Nm outer diameter 105mm overall length 124mm with pilot bore SKU: 60404801](https://maedler.in/product/elastic-coupling-dxa-size-48-max-torque-1300nm-nominal-torque-650nm-outer-diameter-105mm-overall-length-124mm-with-pilot-bore-sku-60404801/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 42 max. torque 920Nm nominal torque 460Nm outer diameter 92mm overall length 110mm with pilot bore SKU: 60404201](https://maedler.in/product/elastic-coupling-dxa-size-42-max-torque-920nm-nominal-torque-460nm-outer-diameter-92mm-overall-length-110mm-with-pilot-bore-sku-60404201/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 38 max. torque 640Nm nominal torque 325Nm outer diameter 84mm overall length 100mm with pilot bore SKU: 60403801](https://maedler.in/product/elastic-coupling-dxa-size-38-max-torque-640nm-nominal-torque-325nm-outer-diameter-84mm-overall-length-100mm-with-pilot-bore-sku-60403801/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 32 max. torque 340Nm nominal torque 170Nm outer diameter 70mm overall length 86mm with pilot bore SKU: 60403201](https://maedler.in/product/elastic-coupling-dxa-size-32-max-torque-340nm-nominal-torque-170nm-outer-diameter-70mm-overall-length-86mm-with-pilot-bore-sku-60403201/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 28 max. torque 240Nm nominal torque 120Nm outer diameter 62mm overall length 76mm no bore SKU: 60402801](https://maedler.in/product/elastic-coupling-dxa-size-28-max-torque-240nm-nominal-torque-120nm-outer-diameter-62mm-overall-length-76mm-no-bore-sku-60402801/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DX size 24 max. torque 160Nm nominal torque 80Nm outer diameter 55mm overall length66 mm no bore SKU: 60402401](https://maedler.in/product/elastic-coupling-dx-size-24-max-torque-160nm-nominal-torque-80nm-outer-diameter-55mm-overall-length66-mm-no-bore-sku-60402401/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [MAEDLER deep groove ball bearing single row inner diameter 4mm outer diameter 12mm width 4mm shielded on both sides SKU: 604-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-4mm-outer-diameter-12mm-width-4mm-shielded-on-both-sides-sku-604-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Elastic coupling PU both sides bore 14mm hubs made from stainless steel SKU: 60399210](https://maedler.in/product/elastic-coupling-pu-both-sides-bore-14mm-hubs-made-from-stainless-steel-sku-60399210/): Material: polyester, hubs either zinc-plated steel or stainless steel 1.4305. These torsionally-stiff couplings made in one-part from flexible plastic are easily mounted. They show very good chemical resistance against acids, bases, solvents, greases and oils. They have a very high tear resistance, are highly flexible at low temperatures, have good shock and vibration damping properties and are corrosion resistant. Max. speed: 3.000 tr/min. Temperature range: -40°C to +100°C. 1)max. torque at max. shaft misalignment 2) max. torque at a shaft misalignment of 1° Angular, 2 mm axial and 0,5 mm radial. - [Elastic coupling PU both sides bore 12mm hubs made from stainless steel SKU: 60399205](https://maedler.in/product/elastic-coupling-pu-both-sides-bore-12mm-hubs-made-from-stainless-steel-sku-60399205/): Material: polyester, hubs either zinc-plated steel or stainless steel 1.4305. These torsionally-stiff couplings made in one-part from flexible plastic are easily mounted. They show very good chemical resistance against acids, bases, solvents, greases and oils. They have a very high tear resistance, are highly flexible at low temperatures, have good shock and vibration damping properties and are corrosion resistant. Max. speed: 3.000 tr/min. Temperature range: -40°C to +100°C. 1)max. torque at max. shaft misalignment 2) max. torque at a shaft misalignment of 1° Angular, 2 mm axial and 0,5 mm radial. - [Elastic coupling PU both sides bore 6mm hubs made from stainless steel SKU: 60399201](https://maedler.in/product/elastic-coupling-pu-both-sides-bore-6mm-hubs-made-from-stainless-steel-sku-60399201/): Material: polyester, hubs either zinc-plated steel or stainless steel 1.4305. These torsionally-stiff couplings made in one-part from flexible plastic are easily mounted. They show very good chemical resistance against acids, bases, solvents, greases and oils. They have a very high tear resistance, are highly flexible at low temperatures, have good shock and vibration damping properties and are corrosion resistant. Max. speed: 3.000 tr/min. Temperature range: -40°C to +100°C. 1)max. torque at max. shaft misalignment 2) max. torque at a shaft misalignment of 1° Angular, 2 mm axial and 0,5 mm radial. - [Beam coupling LA made from stainless steel max. torque 102Nm overall length 130.00 outer diameter 57.15mm both sides bore 30mm SKU: 60299868](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-102nm-overall-length-130-00-outer-diameter-57-15mm-both-sides-bore-30mm-sku-60299868/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 102Nm overall length 130.00 outer diameter 57.15mm both sides bore 24mm SKU: 60299866](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-102nm-overall-length-130-00-outer-diameter-57-15mm-both-sides-bore-24mm-sku-60299866/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 73Nm overall length 95.30mm outer diameter 50.8mm both sides bore 24mm SKU: 60299862](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-73nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-24mm-sku-60299862/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 73Nm overall length 95.30mm outer diameter 50.8mm both sides bore 19mm SKU: 60299860](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-73nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-19mm-sku-60299860/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 37 Nm overall length 95.30mm outer diameter 50.8mm both sides bore 16mm SKU: 60299858](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-37-nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-16mm-sku-60299858/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 48Nm overall length 76.20mm outer diameter 44.45mm both sides bore 19mm SKU: 60299856](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-48nm-overall-length-76-20mm-outer-diameter-44-45mm-both-sides-bore-19mm-sku-60299856/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 48Nm overall length 76.20mm outer diameter 44.45mm both sides bore 16mm SKU: 60299854](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-48nm-overall-length-76-20mm-outer-diameter-44-45mm-both-sides-bore-16mm-sku-60299854/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 36Nm overall length 66.67mm outer diameter 38.1mm both sides bore 19mm SKU: 60299850](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-36nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-19mm-sku-60299850/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 36Nm overall length 66.67mm outer diameter 38.1mm both sides bore 16mm SKU: 60299848](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-36nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-16mm-sku-60299848/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 36Nm overall length 66.67mm outer diameter 38.1mm both sides bore 12mm SKU: 60299846](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-36nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-12mm-sku-60299846/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 25Nm overall length 57.15mm outer diameter 31.75mm both sides bore 16mm SKU: 60299844](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-25nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60299844/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 25Nm overall length 57.15mm outer diameter 31.75mm both sides bore 12mm SKU: 60299842](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-25nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60299842/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 25Nm overall length 57.15mm outer diameter 31.75mm both sides bore 10mm SKU: 60299840](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-25nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60299840/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 16Nm overall length 38.10mm outer diameter 25.40mm both sides bore 10mm SKU: 60299838](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-16nm-overall-length-38-10mm-outer-diameter-25-40mm-both-sides-bore-10mm-sku-60299838/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 16Nm overall length 38.10mm outer diameter 25.40mm both sides bore 8mm SKU: 60299836](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-16nm-overall-length-38-10mm-outer-diameter-25-40mm-both-sides-bore-8mm-sku-60299836/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 10 Nm overall length 38.10mm outer diameter 25.40mm both sides bore 6mm SKU: 60299834](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-10-nm-overall-length-38-10mm-outer-diameter-25-40mm-both-sides-bore-6mm-sku-60299834/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 8Nm overall length 28.00mm outer diameter 19.05mm both sides bore 8mm SKU: 60299832](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-8nm-overall-length-28-00mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60299832/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 4.8 Nm overall length 28.00mm outer diameter 19.05mm both sides bore 6mm SKU: 60299830](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-4-8-nm-overall-length-28-00mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60299830/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 5Nm overall length 25.40mm outer diameter 15.87mm both sides bore 6mm SKU: 60299820](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-5nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60299820/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 3.4 Nm overall length 25.40mm outer diameter 15.87mm both sides bore 5mm SKU: 60299818](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-3-4-nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60299818/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 3Nm overall length 25.40mm outer diameter 12.7mm both sides bore 6mm SKU: 60299814](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-3nm-overall-length-25-40mm-outer-diameter-12-7mm-both-sides-bore-6mm-sku-60299814/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 1.9 Nm overall length 25.40mm outer diameter 12.7mm both sides bore 4mm SKU: 60299812](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-1-9-nm-overall-length-25-40mm-outer-diameter-12-7mm-both-sides-bore-4mm-sku-60299812/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Sprocket KRT 16 B-1 1"x17.02mm 13 teeth material steel for taper bush type 1610 SKU: 10877113](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-13-teeth-material-steel-for-taper-bush-type-1610-sku-10877113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 114 teeth, material steel SKU: 10828800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-114-teeth-material-steel-sku-10828800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 95 teeth material steel SKU: 10828300](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-95-teeth-material-steel-sku-10828300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 80 teeth material steel SKU: 10828000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-80-teeth-material-steel-sku-10828000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 76 teeth material steel SKU: 10827600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-76-teeth-material-steel-sku-10827600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 70 teeth material steel SKU: 10827000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-70-teeth-material-steel-sku-10827000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 60 teeth material steel SKU: 10826000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-60-teeth-material-steel-sku-10826000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 57 teeth material steel SKU: 10825700](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-57-teeth-material-steel-sku-10825700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 54 teeth material steel SKU: 10825400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-54-teeth-material-steel-sku-10825400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 50 teeth material steel SKU: 10825000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-50-teeth-material-steel-sku-10825000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 48 teeth material steel SKU: 10824800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-48-teeth-material-steel-sku-10824800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 45 teeth material steel SKU: 10824500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-45-teeth-material-steel-sku-10824500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 44 teeth material steel SKU: 10824400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-44-teeth-material-steel-sku-10824400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 42 teeth material steel SKU: 10824200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-42-teeth-material-steel-sku-10824200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 40 teeth material steel SKU: 10824000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-40-teeth-material-steel-sku-10824000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 38 teeth material steel SKU: 10823800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-38-teeth-material-steel-sku-10823800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 36 teeth material steel SKU: 10823600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-36-teeth-material-steel-sku-10823600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 35 teeth material steel SKU: 10823500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-35-teeth-material-steel-sku-10823500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 34 teeth material steel SKU: 10823400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-34-teeth-material-steel-sku-10823400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 32 teeth material steel SKU: 10823200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-32-teeth-material-steel-sku-10823200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 30 teeth material steel SKU: 10823000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-30-teeth-material-steel-sku-10823000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 28 teeth material steel SKU: 10822800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-28-teeth-material-steel-sku-10822800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 27 teeth material steel SKU: 10822700](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-27-teeth-material-steel-sku-10822700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 26 teeth material steel SKU: 10822600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-26-teeth-material-steel-sku-10822600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 25 teeth material steel SKU: 10822500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-25-teeth-material-steel-sku-10822500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 24 teeth material steel SKU: 10822400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-24-teeth-material-steel-sku-10822400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 23 teeth material steel SKU: 10822300](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-23-teeth-material-steel-sku-10822300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 22 teeth material steel SKU: 10822200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-22-teeth-material-steel-sku-10822200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 21 teeth material steel SKU: 10822100](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-21-teeth-material-steel-sku-10822100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 20 teeth material steel SKU: 10822000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-20-teeth-material-steel-sku-10822000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 19 teeth material steel SKU: 10821900](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-19-teeth-material-steel-sku-10821900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 18 teeth material steel SKU: 10821800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-18-teeth-material-steel-sku-10821800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 17 teeth material steel SKU: 10821700](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-17-teeth-material-steel-sku-10821700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 16 teeth material steel SKU: 10821600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-16-teeth-material-steel-sku-10821600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 15 teeth material steel SKU: 10821500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-15-teeth-material-steel-sku-10821500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 14 teeth material steel SKU: 10821400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-14-teeth-material-steel-sku-10821400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 13 teeth material steel SKU: 10821300](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-13-teeth-material-steel-sku-10821300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 12 teeth material steel SKU: 10821200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-12-teeth-material-steel-sku-10821200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 11 teeth material steel SKU: 10821100](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-11-teeth-material-steel-sku-10821100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 10 teeth material steel SKU: 10821000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-10-teeth-material-steel-sku-10821000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 9 teeth material steel SKU: 10820900](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-9-teeth-material-steel-sku-10820900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 8 teeth material steel SKU: 10820800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-8-teeth-material-steel-sku-10820800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 114 teeth material cast iron SKU: 10818800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-114-teeth-material-cast-iron-sku-10818800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 95 teeth material cast iron SKU: 10818300](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-95-teeth-material-cast-iron-sku-10818300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 76 teeth material cast iron SKU: 10817600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-76-teeth-material-cast-iron-sku-10817600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 57 teeth material cast iron SKU: 10815700](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-57-teeth-material-cast-iron-sku-10815700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 45 teeth material cast iron SKU: 10814500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-45-teeth-material-cast-iron-sku-10814500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 38 teeth material steel SKU: 10813800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-38-teeth-material-steel-sku-10813800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 36 teeth material steel SKU: 10813600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-36-teeth-material-steel-sku-10813600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 35 teeth material steel SKU: 10813500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-35-teeth-material-steel-sku-10813500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 34 teeth material steel SKU: 10813400](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-34-teeth-material-steel-sku-10813400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 32 teeth material steel SKU: 10813200](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-32-teeth-material-steel-sku-10813200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 30 teeth material steel SKU: 10813000](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-30-teeth-material-steel-sku-10813000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 28 teeth material steel SKU: 10812800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-28-teeth-material-steel-sku-10812800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 27 teeth material steel SKU: 10812700](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-27-teeth-material-steel-sku-10812700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 26 teeth material steel SKU: 10812600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-26-teeth-material-steel-sku-10812600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 25 teeth material steel SKU: 10812500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-25-teeth-material-steel-sku-10812500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 24 teeth material steel SKU: 10812400](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-24-teeth-material-steel-sku-10812400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 23 teeth material steel SKU: 10812300](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-23-teeth-material-steel-sku-10812300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 22 teeth material steel SKU: 10812200](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-22-teeth-material-steel-sku-10812200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 21 teeth material steel SKU: 10812100](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-21-teeth-material-steel-sku-10812100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 20 teeth material steel SKU: 10812000](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-20-teeth-material-steel-sku-10812000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 19 teeth material steel SKU: 10811900](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-19-teeth-material-steel-sku-10811900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 18 teeth material steel SKU: 10811800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-18-teeth-material-steel-sku-10811800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 17 teeth material steel SKU: 10811700](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-17-teeth-material-steel-sku-10811700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 16 teeth material steel SKU: 10811600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-16-teeth-material-steel-sku-10811600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 15 teeth material steel SKU: 10811500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-15-teeth-material-steel-sku-10811500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 14 teeth material steel SKU: 10811400](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-14-teeth-material-steel-sku-10811400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 13 teeth material steel SKU: 10811300](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-13-teeth-material-steel-sku-10811300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 12 teeth material steel SKU: 10811200](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-12-teeth-material-steel-sku-10811200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 11 teeth material steel SKU: 10811100](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-11-teeth-material-steel-sku-10811100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 10 teeth material steel SKU: 10811000](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-10-teeth-material-steel-sku-10811000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 9 teeth material steel SKU: 10810900](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-9-teeth-material-steel-sku-10810900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 8 teeth material steel SKU: 10810800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-8-teeth-material-steel-sku-10810800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/4x7/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799130](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-4x7-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799125](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799124](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799123](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799122](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799121](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799120](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799119](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799118](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799117](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799116](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799115](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799114](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799113](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799112](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 40 teeth material steel teeth induction hardened SKU: 10788140](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-40-teeth-material-steel-teeth-induction-hardened-sku-10788140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 38 teeth material steel teeth induction hardened SKU: 10788138](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-38-teeth-material-steel-teeth-induction-hardened-sku-10788138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 36 teeth material steel teeth induction hardened SKU: 10788136](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-36-teeth-material-steel-teeth-induction-hardened-sku-10788136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 35 teeth material steel teeth induction hardened SKU: 10788135](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-35-teeth-material-steel-teeth-induction-hardened-sku-10788135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 34 teeth material steel teeth induction hardened SKU: 10788134](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-34-teeth-material-steel-teeth-induction-hardened-sku-10788134/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 32 teeth material steel teeth induction hardened SKU: 10788132](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-32-teeth-material-steel-teeth-induction-hardened-sku-10788132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 30 teeth material steel teeth induction hardened SKU: 10788130](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-30-teeth-material-steel-teeth-induction-hardened-sku-10788130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 28 teeth material steel teeth induction hardened SKU: 10788128](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-28-teeth-material-steel-teeth-induction-hardened-sku-10788128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 27 teeth material steel teeth induction hardened SKU: 10788127](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-27-teeth-material-steel-teeth-induction-hardened-sku-10788127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 26 teeth material steel teeth induction hardened SKU: 10788126](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-26-teeth-material-steel-teeth-induction-hardened-sku-10788126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 25 teeth material steel teeth induction hardened SKU: 10788125](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-25-teeth-material-steel-teeth-induction-hardened-sku-10788125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 9mm outer diameter 25mm length 18mm SKU: 60561209](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-9mm-outer-diameter-25mm-length-18mm-sku-60561209/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 8mm outer diameter 25mm length 18mm SKU: 60561208](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-8mm-outer-diameter-25mm-length-18mm-sku-60561208/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 6mm outer diameter 25mm length 18mm SKU: 60561206](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-6mm-outer-diameter-25mm-length-18mm-sku-60561206/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 5mm outer diameter 25mm length 18mm SKU: 60561205](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-5mm-outer-diameter-25mm-length-18mm-sku-60561205/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 11mm outer diameter 20mm length 16mm SKU: 60560911](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-11mm-outer-diameter-20mm-length-16mm-sku-60560911/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 10mm outer diameter 20mm length 16mm SKU: 60560910](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-10mm-outer-diameter-20mm-length-16mm-sku-60560910/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 9mm outer diameter 20mm length 16mm SKU: 60560909](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-9mm-outer-diameter-20mm-length-16mm-sku-60560909/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 8mm outer diameter 20mm length 16mm SKU: 60560908](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-8mm-outer-diameter-20mm-length-16mm-sku-60560908/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 6mm outer diameter 20mm length 16mm SKU: 60560906](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-6mm-outer-diameter-20mm-length-16mm-sku-60560906/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 5mm outer diameter 20mm length 16mm SKU: 60560905](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-5mm-outer-diameter-20mm-length-16mm-sku-60560905/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 4mm outer diameter 20mm length 16mm SKU: 60560904](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-4mm-outer-diameter-20mm-length-16mm-sku-60560904/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 7 borehole 6mm outer diameter 14mm length 12mm SKU: 60560706](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-7-borehole-6mm-outer-diameter-14mm-length-12mm-sku-60560706/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 7 borehole 5mm outer diameter 14mm length 12mm SKU: 60560705](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-7-borehole-5mm-outer-diameter-14mm-length-12mm-sku-60560705/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 7 borehole 4mm outer diameter 14mm length 12mm SKU: 60560704](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-7-borehole-4mm-outer-diameter-14mm-length-12mm-sku-60560704/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 280 max. torque 10000Nm nominal torque 3900Nm outer diameter 280mm Länge 223mm pre-bored 52mm SKU: 60560313](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-280-max-torque-10000nm-nominal-torque-3900nm-outer-diameter-280mm-lange-223mm-pre-bored-52mm-sku-60560313/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 250 max. torque 8400Nm nominal torque 2800Nm outer diameter 250mm Länge 203mm pre-bored 44mm SKU: 60560312](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-250-max-torque-8400nm-nominal-torque-2800nm-outer-diameter-250mm-lange-203mm-pre-bored-44mm-sku-60560312/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 225 max. torque 6000Nm nominal torque 2000Nm outer diameter 225mm Länge 182mm no bore SKU: 60560311](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-225-max-torque-6000nm-nominal-torque-2000nm-outer-diameter-225mm-lange-182mm-no-bore-sku-60560311/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 200 max. torque 4020Nm nominal torque 1340Nm outer diameter 200mm Länge 162mm no bore SKU: 60560310](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-200-max-torque-4020nm-nominal-torque-1340nm-outer-diameter-200mm-lange-162mm-no-bore-sku-60560310/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 180 max. torque 2640Nm nominal torque 880Nm outer diameter 180mm Länge 142mm no bore SKU: 60560309](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-180-max-torque-2640nm-nominal-torque-880nm-outer-diameter-180mm-lange-142mm-no-bore-sku-60560309/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 160 max. torque 1680Nm nominal torque 560Nm outer diameter 160mm Länge 122mm no bore SKU: 60560308](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-160-max-torque-1680nm-nominal-torque-560nm-outer-diameter-160mm-lange-122mm-no-bore-sku-60560308/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 140 max. torque 1080Nm nominal torque 360Nm outer diameter 140mm Länge 112mm no bore SKU: 60560307](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-140-max-torque-1080nm-nominal-torque-360nm-outer-diameter-140mm-lange-112mm-no-bore-sku-60560307/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 125 max. torque 720Nm nominal torque 240Nm outer diameter 125mm Länge 102mm no bore SKU: 60560306](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-125-max-torque-720nm-nominal-torque-240nm-outer-diameter-125mm-lange-102mm-no-bore-sku-60560306/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore SKU: 60560305](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-110-max-torque-480nm-nominal-torque-160nm-outer-diameter-110mm-lange-82mm-no-bore-sku-60560305/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 280 NBR 80 Shore A black SKU: 60560113](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-280-nbr-80-shore-a-black-sku-60560113/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 250 NBR 80 Shore A black SKU: 60560112](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-250-nbr-80-shore-a-black-sku-60560112/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 225 NBR 80 Shore A black SKU: 60560111](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-225-nbr-80-shore-a-black-sku-60560111/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 200 NBR 80 Shore A black SKU: 60560110](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-200-nbr-80-shore-a-black-sku-60560110/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 180 NBR 80 Shore A black SKU: 60560109](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-180-nbr-80-shore-a-black-sku-60560109/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 160 NBR 80 Shore A black SKU: 60560108](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-160-nbr-80-shore-a-black-sku-60560108/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 140 NBR 80 Shore A black SKU: 60560107](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-140-nbr-80-shore-a-black-sku-60560107/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 125 NBR 80 Shore A black SKU: 60560106](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-125-nbr-80-shore-a-black-sku-60560106/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 110 NBR 80 Shore A black SKU: 60560105](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-110-nbr-80-shore-a-black-sku-60560105/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 95 NBR 80 Shore A black SKU: 60560104](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-95-nbr-80-shore-a-black-sku-60560104/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 80 NBR 80 Shore A black SKU: 60560103](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-80-nbr-80-shore-a-black-sku-60560103/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 68 NBR 80 Shore A black SKU: 60560102](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-68-nbr-80-shore-a-black-sku-60560102/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 58 NBR 80 Shore A black SKU: 60560101](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-58-nbr-80-shore-a-black-sku-60560101/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 280 max. torque 10000Nm nominal torque 3900Nm outer diameter 280mm Länge 223mm pre-bored 47mm SKU: 60560013](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-280-max-torque-10000nm-nominal-torque-3900nm-outer-diameter-280mm-lange-223mm-pre-bored-47mm-sku-60560013/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 250 max. torque 8400Nm nominal torque 2800Nm outer diameter 250mm Länge 203mm pre-bored 44mm SKU: 60560012](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-250-max-torque-8400nm-nominal-torque-2800nm-outer-diameter-250mm-lange-203mm-pre-bored-44mm-sku-60560012/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 225 max. torque 6000Nm nominal torque 2000Nm outer diameter 225mm Länge 182mm no bore SKU: 60560011](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-225-max-torque-6000nm-nominal-torque-2000nm-outer-diameter-225mm-lange-182mm-no-bore-sku-60560011/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 200 max. torque 4020Nm nominal torque 1340Nm outer diameter 200mm Länge 162mm no bore SKU: 60560010](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-200-max-torque-4020nm-nominal-torque-1340nm-outer-diameter-200mm-lange-162mm-no-bore-sku-60560010/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 180 max. torque 2640Nm nominal torque 880Nm outer diameter 180mm Länge 142mm no bore SKU: 60560009](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-180-max-torque-2640nm-nominal-torque-880nm-outer-diameter-180mm-lange-142mm-no-bore-sku-60560009/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 160 max. torque 1680Nm nominal torque 560Nm outer diameter 160mm Länge 122mm no bore SKU: 60560008](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-160-max-torque-1680nm-nominal-torque-560nm-outer-diameter-160mm-lange-122mm-no-bore-sku-60560008/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 140 max. torque 1080Nm nominal torque 360Nm outer diameter 140mm Länge 112mm no bore SKU: 60560007](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-140-max-torque-1080nm-nominal-torque-360nm-outer-diameter-140mm-lange-112mm-no-bore-sku-60560007/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 125 max. torque 720Nm nominal torque 240Nm outer diameter 125mm Länge 102mm no bore SKU: 60560006](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-125-max-torque-720nm-nominal-torque-240nm-outer-diameter-125mm-lange-102mm-no-bore-sku-60560006/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore SKU: 60560005](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-110-max-torque-480nm-nominal-torque-160nm-outer-diameter-110mm-lange-82mm-no-bore-sku-60560005/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 95 max. torque 300Nm nominal torque 100Nm outer diameter 95mm Länge 72mm no bore SKU: 60560004](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-95-max-torque-300nm-nominal-torque-100nm-outer-diameter-95mm-lange-72mm-no-bore-sku-60560004/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 80 max. torque 180Nm nominal torque 60Nm outer diameter 80mm Länge 62mm no bore SKU: 60560003](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-80-max-torque-180nm-nominal-torque-60nm-outer-diameter-80mm-lange-62mm-no-bore-sku-60560003/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 68 max. torque 102Nm nominal torque 34Nm outer diameter 68mm Länge 42mm no bore SKU: 60560002](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-68-max-torque-102nm-nominal-torque-34nm-outer-diameter-68mm-lange-42mm-no-bore-sku-60560002/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 58 max. torque 57Nm nominal torque 19Nm outer diameter 58mm Länge 42mm no bore SKU: 60560001](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-58-max-torque-57nm-nominal-torque-19nm-outer-diameter-58mm-lange-42mm-no-bore-sku-60560001/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic coupling RNH with half shell clamps backlash-free size 48 boreholes 50mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60554850](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-48-boreholes-50mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60554850/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 48 boreholes 44mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60554844](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-48-boreholes-44mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60554844/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 48 boreholes 40mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60554840](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-48-boreholes-40mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60554840/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 48 prebore 20mm (no H7) outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60554820](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-48-prebore-20mm-no-h7-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60554820/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 boreholes 50mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554250](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-boreholes-50mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554250/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 boreholes 44mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554244](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-boreholes-44mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554244/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 boreholes 38mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554238](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-boreholes-38mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554238/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 boreholes 35mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554235](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-boreholes-35mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554235/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 prebore 20mm (no H7) outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554220](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-prebore-20mm-no-h7-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554220/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 boreholes 44mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553844](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-boreholes-44mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553844/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 boreholes 38mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553838](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-boreholes-38mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553838/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 boreholes 35mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553835](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-boreholes-35mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553835/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 boreholes 32mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553832](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-boreholes-32mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553832/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 prebore 10mm (no H7) outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553810](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-prebore-10mm-no-h7-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553810/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 35mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552835](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-35mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552835/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 32mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552832](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-32mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552832/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 28mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552828](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-28mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552828/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 25mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552825](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-25mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552825/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 24mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552824](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-24mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552824/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 prebore 10mm (no H7) outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552810](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-prebore-10mm-no-h7-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552810/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 boreholes 28mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552428](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-boreholes-28mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552428/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 boreholes 25mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552425](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-boreholes-25mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552425/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 boreholes 24mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552424](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-boreholes-24mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552424/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 boreholes 20mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552420](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-boreholes-20mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552420/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 prebore 5mm (no H7) outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552405](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-prebore-5mm-no-h7-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552405/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 boreholes 20mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551920](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-boreholes-20mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551920/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 boreholes 19mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551919](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-boreholes-19mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551919/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 boreholes 16mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551916](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-boreholes-16mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551916/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 boreholes 14mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551914](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-boreholes-14mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551914/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 prebore 5mm (no H7) outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551905](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-prebore-5mm-no-h7-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551905/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 14 boreholes 14mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60551414](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-14-boreholes-14mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60551414/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 14 boreholes 11mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60551411](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-14-boreholes-11mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60551411/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 14 boreholes 10mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60551410](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-14-boreholes-10mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60551410/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 14 prebore 3mm (no H7) outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60551403](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-14-prebore-3mm-no-h7-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60551403/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 48 boreholes 50mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60544850](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-48-boreholes-50mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60544850/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 48 boreholes 45mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60544845](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-48-boreholes-45mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60544845/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 48 boreholes 38mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60544838](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-48-boreholes-38mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60544838/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 48 prebore 20mm (no H7) outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60544820](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-48-prebore-20mm-no-h7-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60544820/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 42 boreholes 45mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60544245](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-42-boreholes-45mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60544245/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 42 boreholes 38mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60544238](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-42-boreholes-38mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60544238/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 42 boreholes 32mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60544232](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-42-boreholes-32mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60544232/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 42 prebore 20mm (no H7) outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60544220](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-42-prebore-20mm-no-h7-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60544220/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 38 boreholes 38mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60543838](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-38-boreholes-38mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60543838/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 38 boreholes 32mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60543832](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-38-boreholes-32mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60543832/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 38 boreholes 28mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60543828](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-38-boreholes-28mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60543828/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 38 prebore 10mm (no H7) outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60543810](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-38-prebore-10mm-no-h7-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60543810/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 28 boreholes 32mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60542832](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-28-boreholes-32mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60542832/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 28 boreholes 28mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60542828](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-28-boreholes-28mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60542828/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 28 boreholes 24mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60542824](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-28-boreholes-24mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60542824/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 28 prebore 10mm (no H7) outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60542810](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-28-prebore-10mm-no-h7-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60542810/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 24 boreholes 24mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60542424](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-24-boreholes-24mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60542424/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881645](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881645/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881642](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881642/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881640](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881640/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881638](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881638/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881635](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881635/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881632](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881632/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881630](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881630/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881628](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881628/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881625](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881625/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881550](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881550/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881548](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881548/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881545](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881545/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881542](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881542/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881540](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881540/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881538](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881535](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881532](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881530](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881528](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881525](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881450](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881450/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881448](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881448/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881445](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881445/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881442](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881442/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881440](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881440/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881438](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881435](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881432](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881430](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881430/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881428](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881425](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881350](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881350/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881348](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881348/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881345](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881345/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881342](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881342/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881340](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881340/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881338](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881335](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881332](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881330](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881328](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881325](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881242](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881242/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881240](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881240/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881238](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881235](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881232](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881230](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881228](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881225](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881142](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881142/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881140](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881140/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881138](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881135](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881132](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881130](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881128](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881128/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881125](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRTG 16 B-1 1"x17.02mm 30 teeth material steel teeth hardened for taper bush type 3020 SKU: 10878130](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-3020-sku-10878130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 28 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878128](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 27 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878127](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 26 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878126](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 25 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878125](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 24 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878124](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 23 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878123](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 22 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878122](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 21 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878121](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 20 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878120](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 19 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878119](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 18 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878118](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 17 teeth material steel teeth hardened for taper bush type 2012 SKU: 10878117](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10878117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 16 teeth material steel teeth hardened for taper bush type 2012 SKU: 10878116](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10878116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 15 teeth material steel teeth hardened for taper bush type 1610 SKU: 10878115](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10878115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 14 teeth material steel teeth hardened for taper bush type 1610 SKU: 10878114](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-14-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10878114/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 13 teeth material steel teeth hardened for taper bush type 1610 SKU: 10878113](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10878113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 114 teeth material cast iron for taper bush type 3030 SKU: 10877188G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-114-teeth-material-cast-iron-for-taper-bush-type-3030-sku-10877188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 95 teeth material cast iron for taper bush type 3020 SKU: 10877183G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-95-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 76 teeth material cast iron for taper bush type 3020 SKU: 10877176G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 57 teeth material cast iron for taper bush type 3020 SKU: 10877157G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-57-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 57 teeth material steel for taper bush type 3020 SKU: 10877157](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-57-teeth-material-steel-for-taper-bush-type-3020-sku-10877157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 45 teeth material cast iron for taper bush type 3020 SKU: 10877145G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-45-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877145g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 45 teeth material steel for taper bush type 3020 SKU: 10877145](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-45-teeth-material-steel-for-taper-bush-type-3020-sku-10877145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 38 teeth material cast iron for taper bush type 3020 SKU: 10877138G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-38-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877138g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 38 teeth material steel for taper bush type 3020 SKU: 10877138](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-38-teeth-material-steel-for-taper-bush-type-3020-sku-10877138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 30 teeth material steel for taper bush type 3020 SKU: 10877130](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-30-teeth-material-steel-for-taper-bush-type-3020-sku-10877130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 28 teeth material steel for taper bush type 2517 SKU: 10877128](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-28-teeth-material-steel-for-taper-bush-type-2517-sku-10877128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 27 teeth material steel for taper bush type 2517 SKU: 10877127](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-27-teeth-material-steel-for-taper-bush-type-2517-sku-10877127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 26 teeth material steel for taper bush type 2517 SKU: 10877126](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-26-teeth-material-steel-for-taper-bush-type-2517-sku-10877126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 25 teeth material steel for taper bush type 2517 SKU: 10877125](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-25-teeth-material-steel-for-taper-bush-type-2517-sku-10877125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 24 teeth material steel for taper bush type 2517 SKU: 10877124](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-24-teeth-material-steel-for-taper-bush-type-2517-sku-10877124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 23 teeth material steel for taper bush type 2517 SKU: 10877123](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-23-teeth-material-steel-for-taper-bush-type-2517-sku-10877123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 22 teeth material steel for taper bush type 2517 SKU: 10877122](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-22-teeth-material-steel-for-taper-bush-type-2517-sku-10877122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 21 teeth material steel for taper bush type 2517 SKU: 10877121](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-21-teeth-material-steel-for-taper-bush-type-2517-sku-10877121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 20 teeth material steel for taper bush type 2517 SKU: 10877120](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-20-teeth-material-steel-for-taper-bush-type-2517-sku-10877120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 19 teeth material steel for taper bush type 2517 SKU: 10877119](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-19-teeth-material-steel-for-taper-bush-type-2517-sku-10877119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 18 teeth material steel for taper bush type 2517 SKU: 10877118](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-18-teeth-material-steel-for-taper-bush-type-2517-sku-10877118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 17 teeth material steel for taper bush type 2012 SKU: 10877117](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-17-teeth-material-steel-for-taper-bush-type-2012-sku-10877117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 16 teeth material steel for taper bush type 2012 SKU: 10877116](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-16-teeth-material-steel-for-taper-bush-type-2012-sku-10877116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 15 teeth material steel for taper bush typ 1610 SKU: 10877115](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-15-teeth-material-steel-for-taper-bush-typ-1610-sku-10877115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 14 teeth material steel for taper bush type 1610 SKU: 10877114](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-14-teeth-material-steel-for-taper-bush-type-1610-sku-10877114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Hub part for toothed coupling BOS II size 24 bore 12mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762412](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-12mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762412/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 prebored 10mm sintered metal hub diameter 36mm length 21mm SKU: 60762401](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-prebored-10mm-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762401/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 24 outside diameter 52mm length 40mm SKU: 60762400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-24-outside-diameter-52mm-length-40mm-sku-60762400/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 19mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761919](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-19mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761919/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 16mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761916](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-16mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761916/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 15mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761915](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-15mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761915/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 14mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761914](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-14mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761914/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 12mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761912](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-12mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761912/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 10mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761910](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-10mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761910/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 prebored 10mm sintered metal hub diameter 32mm length 21mm SKU: 60761901](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-prebored-10mm-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761901/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 19 outside diameter 48mm length 37mm SKU: 60761900](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-19-outside-diameter-48mm-length-37mm-sku-60761900/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 bore 14mm with keyway sintered metal hub diameter 25mm length 20mm SKU: 60761414](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-bore-14mm-with-keyway-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761414/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 bore 12mm with keyway sintered metal hub diameter 25mm length 20mm SKU: 60761412](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-bore-12mm-with-keyway-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761412/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 bore 10mm with keyway sintered metal hub diameter 25mm length 20mm SKU: 60761410](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-bore-10mm-with-keyway-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761410/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 bore 8mm with keyway sintered metal hub diameter 25mm length 20mm SKU: 60761408](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-bore-8mm-with-keyway-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761408/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 prebored 5mm sintered metal hub diameter 25mm length 20mm SKU: 60761401](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-prebored-5mm-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761401/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 14 outside diameter 40mm length 37mm SKU: 60761400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-14-outside-diameter-40mm-length-37mm-sku-60761400/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOZ+BW size 24 bore 24mm with keyway material PA6.6 SKU: 60742400](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-24mm-with-keyway-material-pa6-6-sku-60742400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 20mm with keyway material PA6.6 SKU: 60742000](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-20mm-with-keyway-material-pa6-6-sku-60742000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 19mm with keyway material PA6.6 SKU: 60741900](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-19mm-with-keyway-material-pa6-6-sku-60741900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 18mm with keyway material PA6.6 SKU: 60741800](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-18mm-with-keyway-material-pa6-6-sku-60741800/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 16mm with keyway material PA6.6 SKU: 60741600](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-16mm-with-keyway-material-pa6-6-sku-60741600/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 15mm with keyway material PA6.6 SKU: 60741500](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-15mm-with-keyway-material-pa6-6-sku-60741500/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 14mm with keyway material PA6.6 SKU: 60741400](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-14mm-with-keyway-material-pa6-6-sku-60741400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 12mm with keyway material PA6.6 SKU: 60741200](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-12mm-with-keyway-material-pa6-6-sku-60741200/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 11mm with keyway material PA6.6 SKU: 60741100](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-11mm-with-keyway-material-pa6-6-sku-60741100/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 10mm with keyway material PA6.6 SKU: 60741000](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-10mm-with-keyway-material-pa6-6-sku-60741000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BOS+BOZ size 24 material PA6.6 SKU: 60740000](https://maedler.in/product/sleeve-part-for-toothed-coupling-bosboz-size-24-material-pa6-6-sku-60740000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 19 bore 19mm with keyway material PA6.6 SKU: 60721900](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-19-bore-19mm-with-keyway-material-pa6-6-sku-60721900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 19 bore 16mm with keyway material PA6.6 SKU: 60721600](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-19-bore-16mm-with-keyway-material-pa6-6-sku-60721600/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 19 bore 14mm with keyway material PA6.6 SKU: 60721400](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-19-bore-14mm-with-keyway-material-pa6-6-sku-60721400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 19 bore 12mm with keyway material PA6.6 SKU: 60721200](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-19-bore-12mm-with-keyway-material-pa6-6-sku-60721200/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BOS+BOZ size 19 material PA6.6.6 SKU: 60720000](https://maedler.in/product/sleeve-part-for-toothed-coupling-bosboz-size-19-material-pa6-6-6-sku-60720000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm shielded on both sides SKU: 607-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-sku-607-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm shielded on both sides clearance C3 SKU: 607-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-clearance-c3-sku-607-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm sealed on both sides SKU: 607-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-sku-607-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm sealed on both sides SKU: 607-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-sku-607-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm sealed on both sides clearance C3 SKU: 607-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-clearance-c3-sku-607-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm sealed on both sides clearance C3 SKU: 607-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-clearance-c3-sku-607-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Hub part for toothed coupling BOZ+BW size 14 bore 14mm with keyway material PA6.6 SKU: 60701400](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-14mm-with-keyway-material-pa6-6-sku-60701400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 12mm with keyway material PA6.6 SKU: 60701200](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-12mm-with-keyway-material-pa6-6-sku-60701200/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 11mm with keyway material PA6.6 SKU: 60701100](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-11mm-with-keyway-material-pa6-6-sku-60701100/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 10mm with keyway material PA6.6 SKU: 60701000](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-10mm-with-keyway-material-pa6-6-sku-60701000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 9mm with keyway material PA6.6 SKU: 60700900](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-9mm-with-keyway-material-pa6-6-sku-60700900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 8mm with keyway material PA6.6 SKU: 60700800](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-8mm-with-keyway-material-pa6-6-sku-60700800/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 7mm with keyway material PA6.6 SKU: 60700700](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-7mm-with-keyway-material-pa6-6-sku-60700700/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 6mm with keyway material PA6.6 SKU: 60700600](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-6mm-with-keyway-material-pa6-6-sku-60700600/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BOS+BOZ size 14 material PA6.6 SKU: 60700000](https://maedler.in/product/sleeve-part-for-toothed-coupling-bosboz-size-14-material-pa6-6-sku-60700000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm shielded on both sides SKU: 607-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-sku-607-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm shielded on both sides clearance C3 SKU: 607-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-clearance-c3-sku-607-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Sleeve part for toothed coupling BW size 24 bore 24mm with keyway material PA6.6 SKU: 60652400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-24-bore-24mm-with-keyway-material-pa6-6-sku-60652400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 24 bore 20mm with keyway material PA6.6 SKU: 60652000](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-24-bore-20mm-with-keyway-material-pa6-6-sku-60652000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 24 bore 19mm with keyway material PA6.6 SKU: 60651900](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-24-bore-19mm-with-keyway-material-pa6-6-sku-60651900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 24 bore 14mm with keyway material PA6.6 SKU: 60651400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-24-bore-14mm-with-keyway-material-pa6-6-sku-60651400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 19 bore 19mm with keyway material PA6.6 SKU: 60631900](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-19-bore-19mm-with-keyway-material-pa6-6-sku-60631900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 19 bore 15mm with keyway material PA6.6 SKU: 60631500](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-19-bore-15mm-with-keyway-material-pa6-6-sku-60631500/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 19 bore 14mm with keyway material PA6.6 SKU: 60631400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-19-bore-14mm-with-keyway-material-pa6-6-sku-60631400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 17mm width 6mm sealed on both sides SKU: 606-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-17mm-width-6mm-sealed-on-both-sides-sku-606-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Sleeve part for toothed coupling BW size 14 bore 14mm with keyway material PA6.6 SKU: 60611400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-14-bore-14mm-with-keyway-material-pa6-6-sku-60611400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 14 bore 12mm with keyway material PA6.6 SKU: 60611200](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-14-bore-12mm-with-keyway-material-pa6-6-sku-60611200/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 14 bore 11mm with keyway material PA6.6 SKU: 60611100](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-14-bore-11mm-with-keyway-material-pa6-6-sku-60611100/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for curved-toothed coupling BW size 14 bore 10mm with keyway material PA6.6 SKU: 60611000](https://maedler.in/product/sleeve-part-for-curved-toothed-coupling-bw-size-14-bore-10mm-with-keyway-material-pa6-6-sku-60611000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 17mm width 6mm shielded on both sides SKU: 606-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-17mm-width-6mm-shielded-on-both-sides-sku-606-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Elastic coupling RNI stainless steel 1.4305 size 48 max. torque 620Nm nominal torque 310Nm outer diameter 95mm length 140mm no bore SKU: 60599205](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-48-max-torque-620nm-nominal-torque-310nm-outer-diameter-95mm-length-140mm-no-bore-sku-60599205/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 42 max. torque 530Nm nominal torque 265Nm outer diameter 95mm length 126mm no bore SKU: 60599204](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-42-max-torque-530nm-nominal-torque-265nm-outer-diameter-95mm-length-126mm-no-bore-sku-60599204/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 38 max. torque 380Nm nominal torque 190Nm outer diameter 80mm length 114mm no bore SKU: 60599203](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-38-max-torque-380nm-nominal-torque-190nm-outer-diameter-80mm-length-114mm-no-bore-sku-60599203/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 28 max. torque 190Nm nominal torque 95Nm outer diameter 65mm length 90mm no bore SKU: 60599202](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-28-max-torque-190nm-nominal-torque-95nm-outer-diameter-65mm-length-90mm-no-bore-sku-60599202/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 24 max. torque 70Nm nominal torque 35Nm outer diameter 55mm length 78mm no bore SKU: 60599201](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-24-max-torque-70nm-nominal-torque-35nm-outer-diameter-55mm-length-78mm-no-bore-sku-60599201/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 19 max. torque 20Nm nominal torque 10Nm outer diameter 40mm length 66mm no bore SKU: 60599200](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-19-max-torque-20nm-nominal-torque-10nm-outer-diameter-40mm-length-66mm-no-bore-sku-60599200/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 28mm outer diameter 65mm length 38.5mm SKU: 60562828](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-28mm-outer-diameter-65mm-length-38-5mm-sku-60562828/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 25mm outer diameter 65mm length 38.5mm SKU: 60562825](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-25mm-outer-diameter-65mm-length-38-5mm-sku-60562825/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 24mm outer diameter 65mm length 38.5mm SKU: 60562824](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-24mm-outer-diameter-65mm-length-38-5mm-sku-60562824/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 20mm outer diameter 65mm length 38.5mm SKU: 60562820](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-20mm-outer-diameter-65mm-length-38-5mm-sku-60562820/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 14mm outer diameter 65mm length 38.5mm SKU: 60562814](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-14mm-outer-diameter-65mm-length-38-5mm-sku-60562814/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 25mm outer diameter 55mm length 36mm SKU: 60562425](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-25mm-outer-diameter-55mm-length-36mm-sku-60562425/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 24mm outer diameter 55mm length 36mm SKU: 60562424](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-24mm-outer-diameter-55mm-length-36mm-sku-60562424/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 20mm outer diameter 55mm length 36mm SKU: 60562420](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-20mm-outer-diameter-55mm-length-36mm-sku-60562420/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 19mm outer diameter 55mm length 36mm SKU: 60562419](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-19mm-outer-diameter-55mm-length-36mm-sku-60562419/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 16mm outer diameter 55mm length 36mm SKU: 60562416](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-16mm-outer-diameter-55mm-length-36mm-sku-60562416/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 15mm outer diameter 55mm length 36mm SKU: 60562415](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-15mm-outer-diameter-55mm-length-36mm-sku-60562415/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 14mm outer diameter 55mm length 36mm SKU: 60562414](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-14mm-outer-diameter-55mm-length-36mm-sku-60562414/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 10mm outer diameter 55mm length 36mm SKU: 60562410](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-10mm-outer-diameter-55mm-length-36mm-sku-60562410/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 20mm outer diameter 40mm length 31mm SKU: 60561920](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-20mm-outer-diameter-40mm-length-31mm-sku-60561920/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 19mm outer diameter 40mm length 31mm SKU: 60561919](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-19mm-outer-diameter-40mm-length-31mm-sku-60561919/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 16mm outer diameter 40mm length 31mm SKU: 60561916](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-16mm-outer-diameter-40mm-length-31mm-sku-60561916/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 15mm outer diameter 40mm length 31mm SKU: 60561915](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-15mm-outer-diameter-40mm-length-31mm-sku-60561915/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 14mm outer diameter 40mm length 31mm SKU: 60561914](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-14mm-outer-diameter-40mm-length-31mm-sku-60561914/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 12mm outer diameter 40mm length 31mm SKU: 60561912](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-12mm-outer-diameter-40mm-length-31mm-sku-60561912/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 11mm outer diameter 40mm length 31mm SKU: 60561911](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-11mm-outer-diameter-40mm-length-31mm-sku-60561911/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 16mm outer diameter 30mm length 21mm SKU: 60561416](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-16mm-outer-diameter-30mm-length-21mm-sku-60561416/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 15mm outer diameter 30mm length 21mm SKU: 60561415](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-15mm-outer-diameter-30mm-length-21mm-sku-60561415/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 14mm outer diameter 30mm length 21mm SKU: 60561414](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-14mm-outer-diameter-30mm-length-21mm-sku-60561414/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 12mm outer diameter 30mm length 21mm SKU: 60561412](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-12mm-outer-diameter-30mm-length-21mm-sku-60561412/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 11mm outer diameter 30mm length 21mm SKU: 60561411](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-11mm-outer-diameter-30mm-length-21mm-sku-60561411/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 10mm outer diameter 30mm length 21mm SKU: 60561410](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-10mm-outer-diameter-30mm-length-21mm-sku-60561410/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 8mm outer diameter 30mm length 21mm SKU: 60561408](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-8mm-outer-diameter-30mm-length-21mm-sku-60561408/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 5mm outer diameter 30mm length 21mm SKU: 60561405](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-5mm-outer-diameter-30mm-length-21mm-sku-60561405/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 12mm outer diameter 25mm length 18mm SKU: 60561212](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-12mm-outer-diameter-25mm-length-18mm-sku-60561212/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 11mm outer diameter 25mm length 18mm SKU: 60561211](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-11mm-outer-diameter-25mm-length-18mm-sku-60561211/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 10mm outer diameter 25mm length 18mm SKU: 60561210](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-10mm-outer-diameter-25mm-length-18mm-sku-60561210/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882550](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882550/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882548](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882548/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882545](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882545/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882542](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882542/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882540](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882540/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882538](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882535](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882532](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882530](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882528](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882525](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882450](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882450/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882448](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882448/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882445](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882445/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882442](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882442/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882440](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882440/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882438](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882435](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882432](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882430](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882430/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882428](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882425](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882350](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882350/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882348](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882348/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882345](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882345/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882342](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882342/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882340](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882340/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882338](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882335](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882332](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882330](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882328](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882325](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882250](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882250/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882248](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882248/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882245](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882245/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882242](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882242/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882240](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882240/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882238](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882235](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882232](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882230](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882228](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882225](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882150](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882150/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882148](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882148/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882145](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882145/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882142](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882142/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882140](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882140/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882138](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882135](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882132](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882130](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882128](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882128/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882125](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882050](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882050/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882048](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882048/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882045](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882045/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882042](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882042/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882040](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882040/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882038](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882035](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882032](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882030](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882028](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882028/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882025](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881950](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881950/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881948](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881948/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881945](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881945/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881942](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881942/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881940](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881940/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881938](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881935](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881935/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881932](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881932/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881930](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881930/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881928](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881928/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881925](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881925/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881850](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881850/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881848](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881848/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881845](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881845/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881842](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881842/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881840](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881840/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881838](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881838/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881835](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881835/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881832](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881832/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881830](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881830/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881828](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881828/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881825](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881825/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881750](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881750/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881745](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881745/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881742](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881742/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881740](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881740/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881738](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881738/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881735](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881735/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881732](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881732/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881730](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881730/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881728](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881728/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881725](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881725/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881650](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881650/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881648](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881648/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Locking assembly COM-AS bore 45mm size 45x75x24mm SKU: 61530045](https://maedler.in/product/locking-assembly-com-as-bore-45mm-size-45x75x24mm-sku-61530045/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 35mm size 35x60x20mm SKU: 61530035](https://maedler.in/product/locking-assembly-com-as-bore-35mm-size-35x60x20mm-sku-61530035/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Very short version. Also suitable for small hub diameters. Not self-centering. Not self-locking. Axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Like COM-A, but with slotted pressure rings. Not self-centering. Self-releasing at dismounting. No axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 32mm size 32x60x20mm SKU: 61530032](https://maedler.in/product/locking-assembly-com-as-bore-32mm-size-32x60x20mm-sku-61530032/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 28mm size 28x55x20mm SKU: 61530028](https://maedler.in/product/locking-assembly-com-as-bore-28mm-size-28x55x20mm-sku-61530028/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 24mm size 24x50x20mm SKU: 61530024](https://maedler.in/product/locking-assembly-com-as-bore-24mm-size-24x50x20mm-sku-61530024/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 20mm size 20x47x20mm SKU: 61530020](https://maedler.in/product/locking-assembly-com-as-bore-20mm-size-20x47x20mm-sku-61530020/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 19mm size 19x47x20mm SKU: 61530019](https://maedler.in/product/locking-assembly-com-as-bore-19mm-size-19x47x20mm-sku-61530019/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 16mm size 16-44 SKU: 61530016](https://maedler.in/product/locking-assembly-com-as-bore-16mm-size-16-44-sku-61530016/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 15mm size 15-42 SKU: 61530015](https://maedler.in/product/locking-assembly-com-as-bore-15mm-size-15-42-sku-61530015/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Safety clutch SI size 50 torque 60 - 180 Nm SKU: 61275000](https://maedler.in/product/safety-clutch-si-size-50-torque-60-180-nm-sku-61275000/): Material: Steel. This clutch is a backlash-free overload system operating on the positive principle. It works with the recently developed principle of the punched disk spring. At overload the disk spring disengages, the torque flow is interrupted. After the overload has passed, the clutch re-engages on its own. The axial movement of the shift ring can be used to trigger a limit switch/sensor turning off the engine (travel 2mm). Customer components (e.g. sprockets, pulleys) can be easily integrated; special components, as needed for the common systems, are not required here. Customized bores and feather-key grooves available at surcharge. - [Safety clutch SI size 35 torque 25 - 80 Nm SKU: 61273500](https://maedler.in/product/safety-clutch-si-size-35-torque-25-80-nm-sku-61273500/): Material: Steel. This clutch is a backlash-free overload system operating on the positive principle. It works with the recently developed principle of the punched disk spring. At overload the disk spring disengages, the torque flow is interrupted. After the overload has passed, the clutch re-engages on its own. The axial movement of the shift ring can be used to trigger a limit switch/sensor turning off the engine (travel 2mm). Customer components (e.g. sprockets, pulleys) can be easily integrated; special components, as needed for the common systems, are not required here. Customized bores and feather-key grooves available at surcharge. - [Safety clutch SI size 25 torque 20 - 60 Nm SKU: 61272500](https://maedler.in/product/safety-clutch-si-size-25-torque-20-60-nm-sku-61272500/): Material: Steel. This clutch is a backlash-free overload system operating on the positive principle. It works with the recently developed principle of the punched disk spring. At overload the disk spring disengages, the torque flow is interrupted. After the overload has passed, the clutch re-engages on its own. The axial movement of the shift ring can be used to trigger a limit switch/sensor turning off the engine (travel 2mm). Customer components (e.g. sprockets, pulleys) can be easily integrated; special components, as needed for the common systems, are not required here. Customized bores and feather-key grooves available at surcharge. - [Safety clutch SI size 20 torque 6 - 20 Nm SKU: 61272000](https://maedler.in/product/safety-clutch-si-size-20-torque-6-20-nm-sku-61272000/): Material: Steel. This clutch is a backlash-free overload system operating on the positive principle. It works with the recently developed principle of the punched disk spring. At overload the disk spring disengages, the torque flow is interrupted. After the overload has passed, the clutch re-engages on its own. The axial movement of the shift ring can be used to trigger a limit switch/sensor turning off the engine (travel 2mm). Customer components (e.g. sprockets, pulleys) can be easily integrated; special components, as needed for the common systems, are not required here. Customized bores and feather-key grooves available at surcharge. - [Limit switch for safety clutch 220-250 V AC SKU: 61260500](https://maedler.in/product/limit-switch-for-safety-clutch-220-250-v-ac-sku-61260500/): Material: Housing made from aluminium die-cast, painted grey, with rubber seal. Switch made from brass. Bellow made from neoprene (black). Housing screws zinc-plated. Cable connection made from plastic (grey). Electrical connection: 220-250V AC, 10 A. Application: Robust limit switch for safety clutches SI, safety clutches CM or similar applications. If the torque set on the clutch is exceeded, the clutch slips. At the same time the shift ring moves. The shift ring then triggers the switch and turns off the engine. This protects the entire drive system and prevents possible damage. Mounting: On the back wall are two bores Ø 4.3 mm. These fit two screws M4 with internal hexagon, slot or cross recess (head-Ø up to 7 mm). The wall thickness around the mounting holes is 8 mm. - [Sliding hub FA-K size 2 torque adjustable 25-140Nm outer diameter 88mm max. bore: 40mm with clamp hub SKU: 61211200](https://maedler.in/product/sliding-hub-fa-k-size-2-torque-adjustable-25-140nm-outer-diameter-88mm-max-bore-40mm-with-clamp-hub-sku-61211200/): Material: Steel, zinc-plated and chromated.• Clamp hub version.• The slipping torque can be adjusted with common assembly tools for screws, also after mounting.• By mounting an additional springs the torque range can be increased (additional spring has to be ordered separately).• The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. - [Sliding hub FA-K size 1 torque adjustable 20-75Nm outer diameter 68mm max. bore: 28mm with clamp hub SKU: 61211110](https://maedler.in/product/sliding-hub-fa-k-size-1-torque-adjustable-20-75nm-outer-diameter-68mm-max-bore-28mm-with-clamp-hub-sku-61211110/): Material: Steel, zinc-plated and chromated.• Clamp hub version.• The slipping torque can be adjusted with common assembly tools for screws, also after mounting.• By mounting an additional springs the torque range can be increased (additional spring has to be ordered separately).• The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. - [Sliding hub FA-K size 01 torque adjustable 5-35Nm outer diameter 58mm max. bore: 25mm with clamp hub SKU: 61211100](https://maedler.in/product/sliding-hub-fa-k-size-01-torque-adjustable-5-35nm-outer-diameter-58mm-max-bore-25mm-with-clamp-hub-sku-61211100/): Material: Steel, zinc-plated and chromated.• Clamp hub version.• The slipping torque can be adjusted with common assembly tools for screws, also after mounting.• By mounting an additional springs the torque range can be increased (additional spring has to be ordered separately).• The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. - [Sliding hub FA-K size 0 torque adjustable 2-10Nm outer diameter 45mm max. bore: 22mm with clamp hub SKU: 61211010](https://maedler.in/product/sliding-hub-fa-k-size-0-torque-adjustable-2-10nm-outer-diameter-45mm-max-bore-22mm-with-clamp-hub-sku-61211010/): Material: Steel, zinc-plated and chromated.• Clamp hub version.• The slipping torque can be adjusted with common assembly tools for screws, also after mounting.• By mounting an additional springs the torque range can be increased (additional spring has to be ordered separately).• The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. - [Spare lamellas for friction clutch PD no. 611 006 00 consisting of 6 inner lamellas, 5 outer lamellas and pressure disc SKU: 61101600](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-006-00-consisting-of-6-inner-lamellas-5-outer-lamellas-and-pressure-disc-sku-61101600/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 005 00 consisting of 5 inner lamellas, 4 outer lamellas and pressure disc SKU: 61101500](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-005-00-consisting-of-5-inner-lamellas-4-outer-lamellas-and-pressure-disc-sku-61101500/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 004 00 consisting of 8 inner lamellas, 7 outer lamellas and pressure disc SKU: 61101400](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-004-00-consisting-of-8-inner-lamellas-7-outer-lamellas-and-pressure-disc-sku-61101400/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 003 00 consisting of 8 inner lamellas, 7 outer lamellas and pressure disc SKU: 61101300](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-003-00-consisting-of-8-inner-lamellas-7-outer-lamellas-and-pressure-disc-sku-61101300/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 002 00 consisting of 7 inner lamellas, 6 outer lamellas and pressure disc SKU: 61101200](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-002-00-consisting-of-7-inner-lamellas-6-outer-lamellas-and-pressure-disc-sku-61101200/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 001 00 consisting of 5 inner lamellas, 4 outer lamellas and pressure disc SKU: 61101100](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-001-00-consisting-of-5-inner-lamellas-4-outer-lamellas-and-pressure-disc-sku-61101100/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 380 Nm outer diameter 145mm pilot bore 25mm max. bore 70mm SKU: 61100600](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-380-nm-outer-diameter-145mm-pilot-bore-25mm-max-bore-70mm-sku-61100600/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 230 Nm outer diameter 120mm pilot bore 25mm max. bore 55mm SKU: 61100500](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-230-nm-outer-diameter-120mm-pilot-bore-25mm-max-bore-55mm-sku-61100500/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 126 Nm outer diameter 100mm pilot bore 25mm max. bore 42mm SKU: 61100400](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-126-nm-outer-diameter-100mm-pilot-bore-25mm-max-bore-42mm-sku-61100400/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 62 Nm outer diameter 82mm pilot bore 12mm max. bore 40mm SKU: 61100300](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-62-nm-outer-diameter-82mm-pilot-bore-12mm-max-bore-40mm-sku-61100300/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 33 Nm outer diameter 67mm pilot bore 12mm max. bore 25mm SKU: 61100200](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-33-nm-outer-diameter-67mm-pilot-bore-12mm-max-bore-25mm-sku-61100200/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 14 Nm outer diameter 55mm pilot bore 10mm max. bore 20mm SKU: 61100100](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-14-nm-outer-diameter-55mm-pilot-bore-10mm-max-bore-20mm-sku-61100100/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch R2 with 6 friction lamellas type C bore 8mm SKU: 61044900](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-c-bore-8mm-sku-61044900/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts with shaft misalignement. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type C bore 6mm SKU: 61044800](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-c-bore-6mm-sku-61044800/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts with shaft misalignement. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type C bore 8mm SKU: 61044400](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-c-bore-8mm-sku-61044400/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts with shaft misalignement. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type C bore 6mm SKU: 61044300](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-c-bore-6mm-sku-61044300/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts with shaft misalignement. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type B bore 8mm SKU: 61042900](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-b-bore-8mm-sku-61042900/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type B bore 6mm SKU: 61042800](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-b-bore-6mm-sku-61042800/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type B bore 8mm SKU: 61042400](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-b-bore-8mm-sku-61042400/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type B bore 6mm SKU: 61042300](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-b-bore-6mm-sku-61042300/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type A bore 8mm SKU: 61040900](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-a-bore-8mm-sku-61040900/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type A bore 6mm SKU: 61040800](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-a-bore-6mm-sku-61040800/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type A bore 8mm SKU: 61040400](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-a-bore-8mm-sku-61040400/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type A bore 6mm SKU: 61040300](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-a-bore-6mm-sku-61040300/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm shielded on both sides SKU: 609-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-shielded-on-both-sides-sku-609-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm shielded on both sides clearance C3 SKU: 609-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-shielded-on-both-sides-clearance-c3-sku-609-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm sealed on both sides SKU: 609-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-sealed-on-both-sides-sku-609-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm sealed on both sides SKU: 609-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-sealed-on-both-sides-sku-609-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm sealed on both sides clearance C3 SKU: 609-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-sealed-on-both-sides-clearance-c3-sku-609-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm shielded on both sides SKU: 609-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-shielded-on-both-sides-sku-609-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm shielded on both sides SKU: 608-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-sku-608-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm shielded on both sides clearance C3 SKU: 608-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-clearance-c3-sku-608-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm sealed on both sides SKU: 608-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-sku-608-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm sealed on both sides SKU: 608-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-sku-608-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm sealed on both sides clearance C3 SKU: 608-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-clearance-c3-sku-608-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm sealed on both sides clearance C3 SKU: 608-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-clearance-c3-sku-608-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm shielded on both sides SKU: 608-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-sku-608-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm shielded on both sides clearance C3 SKU: 608-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-clearance-c3-sku-608-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm open (unsealed) SKU: 608-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-open-unsealed-sku-608-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [Hub part for toothed coupling BOS II size 48 bore 40mm with keyway sintered metal hub diameter 68mm length 45mm SKU: 60764840](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-bore-40mm-with-keyway-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764840/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 48 bore 38mm with keyway sintered metal hub diameter 68mm length 45mm SKU: 60764838](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-bore-38mm-with-keyway-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764838/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 48 bore 35mm with keyway sintered metal hub diameter 68mm length 45mm SKU: 60764835](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-bore-35mm-with-keyway-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764835/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 48 bore 30mm with keyway sintered metal hub diameter 68mm length 45mm SKU: 60764830](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-bore-30mm-with-keyway-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764830/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 48 prebored 12mm sintered metal hub diameter 68mm length 45mm SKU: 60764801](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-prebored-12mm-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764801/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 48 outside diameter 98mm length 50mm SKU: 60764800](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-48-outside-diameter-98mm-length-50mm-sku-60764800/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 bore 38mm with keyway sintered metal hub diameter 68mm length 38mm SKU: 60764238](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-bore-38mm-with-keyway-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764238/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 bore 35mm with keyway sintered metal hub diameter 68mm length 38mm SKU: 60764235](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-bore-35mm-with-keyway-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764235/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 bore 30mm with keyway sintered metal hub diameter 68mm length 38mm SKU: 60764230](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-bore-30mm-with-keyway-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764230/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 bore 25mm with keyway sintered metal hub diameter 68mm length 38mm SKU: 60764225](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-bore-25mm-with-keyway-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764225/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 prebored 12mm sintered metal hub diameter 68mm length 38mm SKU: 60764201](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-prebored-12mm-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764201/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 42 outside diameter 92mm length 50mm SKU: 60764200](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-42-outside-diameter-92mm-length-50mm-sku-60764200/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 30mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763830](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-30mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763830/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 25mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763825](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-25mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763825/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 22mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763822](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-22mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763822/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 20mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763820](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-20mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763820/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 19mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763819](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-19mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763819/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 prebored 12mm sintered metal hub diameter 58mm length 35mm SKU: 60763801](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-prebored-12mm-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763801/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 38 outside diameter 83mm length 48mm SKU: 60763800](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-38-outside-diameter-83mm-length-48mm-sku-60763800/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 25mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763225](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-25mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763225/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 24mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763224](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-24mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763224/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 22mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763222](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-22mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763222/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 20mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763220](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-20mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763220/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 19mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763219](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-19mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763219/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 prebored 12mm sintered metal hub diameter 50mm length 35mm SKU: 60763201](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-prebored-12mm-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763201/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 32 outside diameter 76mm length 48mm SKU: 60763200](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-32-outside-diameter-76mm-length-48mm-sku-60763200/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 25mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762825](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-25mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762825/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 24mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762824](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-24mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762824/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 22mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762822](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-22mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762822/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 20mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762820](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-20mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762820/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 19mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762819](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-19mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762819/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 18mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762818](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-18mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762818/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 16mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762816](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-16mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762816/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 15mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762815](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-15mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762815/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 14mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762814](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-14mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762814/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 prebored 6mm sintered metal hub diameter 44mm length 35mm SKU: 60762801](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-prebored-6mm-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762801/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 28 outside diameter 65mm length 46mm SKU: 60762800](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-28-outside-diameter-65mm-length-46mm-sku-60762800/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 24mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762424](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-24mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762424/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 20mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762420](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-20mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762420/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 19mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762419](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-19mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762419/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 16mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762416](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-16mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762416/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 15mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762415](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-15mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762415/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 14mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762414](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-14mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762414/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 19 teeth material steel for taper bush typ 2517 SKU: 10977119](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-19-teeth-material-steel-for-taper-bush-typ-2517-sku-10977119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 18 teeth material steel for taper bush typ 2517 SKU: 10977118](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-18-teeth-material-steel-for-taper-bush-typ-2517-sku-10977118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 17 teeth material steel for taper bush typ 2517 SKU: 10977117](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-17-teeth-material-steel-for-taper-bush-typ-2517-sku-10977117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 16 teeth material steel for taper bush typ 2517 SKU: 10977116](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-16-teeth-material-steel-for-taper-bush-typ-2517-sku-10977116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 15 teeth material steel for taper bush typ 2517 SKU: 10977115](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-15-teeth-material-steel-for-taper-bush-typ-2517-sku-10977115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 14 teeth material steel for taper bush typ 2012 SKU: 10977114](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-14-teeth-material-steel-for-taper-bush-typ-2012-sku-10977114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 13 teeth material steel for taper bush typ 2012 SKU: 10977113](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-13-teeth-material-steel-for-taper-bush-typ-2012-sku-10977113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 57 teeth material steel SKU: 10925700](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-57-teeth-material-steel-sku-10925700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 54 teeth material steel SKU: 10925400](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-54-teeth-material-steel-sku-10925400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 48 teeth material steel SKU: 10924800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-48-teeth-material-steel-sku-10924800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 45 teeth material steel SKU: 10924500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-45-teeth-material-steel-sku-10924500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 40 teeth material steel SKU: 10924000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-40-teeth-material-steel-sku-10924000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 38 teeth material steel SKU: 10923800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-38-teeth-material-steel-sku-10923800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 35 teeth material steel SKU: 10923500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-35-teeth-material-steel-sku-10923500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 30 teeth material steel SKU: 10923000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-30-teeth-material-steel-sku-10923000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 27 teeth material steel SKU: 10922700](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-27-teeth-material-steel-sku-10922700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 25 teeth material steel SKU: 10922500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-25-teeth-material-steel-sku-10922500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 24 teeth material steel SKU: 10922400](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-24-teeth-material-steel-sku-10922400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 23 teeth material steel SKU: 10922300](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-23-teeth-material-steel-sku-10922300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 22 teeth material steel SKU: 10922200](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-22-teeth-material-steel-sku-10922200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 21 teeth material steel SKU: 10922100](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-21-teeth-material-steel-sku-10922100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 20 teeth material steel SKU: 10922000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-sku-10922000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 19 teeth material steel SKU: 10921900](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-sku-10921900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 18 teeth material steel SKU: 10921800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-sku-10921800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 17 teeth material steel SKU: 10921700](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-sku-10921700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 16 teeth material steel SKU: 10921600](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-sku-10921600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 15 teeth material steel SKU: 10921500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-sku-10921500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 14 teeth material steel SKU: 10921400](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-sku-10921400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 13 teeth material steel SKU: 10921300](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-sku-10921300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 12 teeth material steel SKU: 10921200](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-sku-10921200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 11 teeth material steel SKU: 10921100](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-sku-10921100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 10 teeth material steel SKU: 10921000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-sku-10921000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 9 teeth material steel SKU: 10920900](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-9-teeth-material-steel-sku-10920900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 8 teeth material steel SKU: 10920800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-8-teeth-material-steel-sku-10920800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 76 teeth material cast iron SKU: 10917600](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-76-teeth-material-cast-iron-sku-10917600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 57 teeth material cast iron SKU: 10915700](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-57-teeth-material-cast-iron-sku-10915700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 45 teeth material cast iron SKU: 10914500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-45-teeth-material-cast-iron-sku-10914500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 38 teeth material cast iron SKU: 10913800](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-38-teeth-material-cast-iron-sku-10913800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 35 teeth material steel SKU: 10913500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-35-teeth-material-steel-sku-10913500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 30 teeth material steel SKU: 10913000](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-30-teeth-material-steel-sku-10913000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 27 teeth material steel SKU: 10912700](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-27-teeth-material-steel-sku-10912700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 25 teeth material steel SKU: 10912500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-25-teeth-material-steel-sku-10912500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 23 teeth material steel SKU: 10912300](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-23-teeth-material-steel-sku-10912300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 21 teeth material steel SKU: 10912100](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-21-teeth-material-steel-sku-10912100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 20 teeth material steel SKU: 10912000](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-sku-10912000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 19 teeth material steel SKU: 10911900](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-sku-10911900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 18 teeth material steel SKU: 10911800](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-sku-10911800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 17 teeth material steel SKU: 10911700](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-sku-10911700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 16 teeth material steel SKU: 10911600](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-sku-10911600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 15 teeth material steel SKU: 10911500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-sku-10911500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 14 teeth material steel SKU: 10911400](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-sku-10911400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 13 teeth material steel SKU: 10911300](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-sku-10911300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 12 teeth material steel SKU: 10911200](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-sku-10911200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 11 teeth material steel SKU: 10911100](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-sku-10911100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 10 teeth material steel SKU: 10911000](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-sku-10911000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 9 teeth material steel SKU: 10910900](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steel-sku-10910900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 8 teeth material steel SKU: 10910800](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-8-teeth-material-steel-sku-10910800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899130](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899125](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899124](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899123](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899122](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899121](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899120](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899119](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899118](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899117](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899116](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899115](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899114](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899113](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899112](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 40 teeth material steel teeth induction hardened SKU: 10888140](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-40-teeth-material-steel-teeth-induction-hardened-sku-10888140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 38 teeth material steel teeth induction hardened SKU: 10888138](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-38-teeth-material-steel-teeth-induction-hardened-sku-10888138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 36 teeth material steel teeth induction hardened SKU: 10888136](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-36-teeth-material-steel-teeth-induction-hardened-sku-10888136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 35 teeth material steel teeth induction hardened SKU: 10888135](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-35-teeth-material-steel-teeth-induction-hardened-sku-10888135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 34 teeth material steel teeth induction hardened SKU: 10888134](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-34-teeth-material-steel-teeth-induction-hardened-sku-10888134/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 32 teeth material steel teeth induction hardened SKU: 10888132](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-32-teeth-material-steel-teeth-induction-hardened-sku-10888132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 30 teeth material steel teeth induction hardened SKU: 10888130](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-30-teeth-material-steel-teeth-induction-hardened-sku-10888130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 28 teeth material steel teeth induction hardened SKU: 10888128](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-28-teeth-material-steel-teeth-induction-hardened-sku-10888128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 27 teeth material steel teeth induction hardened SKU: 10888127](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-27-teeth-material-steel-teeth-induction-hardened-sku-10888127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 26 teeth material steel teeth induction hardened SKU: 10888126](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-26-teeth-material-steel-teeth-induction-hardened-sku-10888126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 25 teeth material steel teeth induction hardened SKU: 10888125](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-25-teeth-material-steel-teeth-induction-hardened-sku-10888125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 24 teeth material steel teeth induction hardened SKU: 10888124](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-24-teeth-material-steel-teeth-induction-hardened-sku-10888124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 23 teeth material steel teeth induction hardened SKU: 10888123](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-23-teeth-material-steel-teeth-induction-hardened-sku-10888123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 22 teeth material steel teeth induction hardened SKU: 10888122](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-22-teeth-material-steel-teeth-induction-hardened-sku-10888122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 21 teeth material steel teeth induction hardened SKU: 10888121](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-21-teeth-material-steel-teeth-induction-hardened-sku-10888121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 20 teeth material steel teeth induction hardened SKU: 10888120](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-20-teeth-material-steel-teeth-induction-hardened-sku-10888120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 19 teeth material steel teeth induction hardened SKU: 10888119](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-19-teeth-material-steel-teeth-induction-hardened-sku-10888119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 18 teeth material steel teeth induction hardened SKU: 10888118](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-18-teeth-material-steel-teeth-induction-hardened-sku-10888118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 17 teeth material steel teeth induction hardened SKU: 10888117](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-17-teeth-material-steel-teeth-induction-hardened-sku-10888117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 16 teeth material steel teeth induction hardened SKU: 10888116](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-16-teeth-material-steel-teeth-induction-hardened-sku-10888116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 15 teeth material steel teeth induction hardened SKU: 10888115](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-15-teeth-material-steel-teeth-induction-hardened-sku-10888115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 14 teeth material steel teeth induction hardened SKU: 10888114](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-14-teeth-material-steel-teeth-induction-hardened-sku-10888114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 13 teeth material steel teeth induction hardened SKU: 10888113](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-13-teeth-material-steel-teeth-induction-hardened-sku-10888113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 12 teeth material steel teeth induction hardened SKU: 10888112](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-12-teeth-material-steel-teeth-induction-hardened-sku-10888112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 11 teeth material steel teeth induction hardened SKU: 10888111](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-11-teeth-material-steel-teeth-induction-hardened-sku-10888111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 10 teeth material steel teeth induction hardened SKU: 10888110](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-10-teeth-material-steel-teeth-induction-hardened-sku-10888110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 9 teeth material steel teeth induction hardened SKU: 10888109](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-9-teeth-material-steel-teeth-induction-hardened-sku-10888109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 8 teeth material steel teeth induction hardened SKU: 10888108](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-8-teeth-material-steel-teeth-induction-hardened-sku-10888108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm shielded on both sides clearance C3 SKU: 6200-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-shielded-on-both-sides-clearance-c3-sku-6200-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm open (unsealed) SKU: 6200-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-open-unsealed-sku-6200-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm open (unsealed) clearance C3 SKU: 6200-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-open-unsealed-clearance-c3-sku-6200-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 68mm width 12mm sealed on both sides alternative marking 6909 SKU: 61909-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-68mm-width-12mm-sealed-on-both-sides-alternative-marking-6909-sku-61909-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 62mm width 12mm sealed on both sides SKU: 61908-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-62mm-width-12mm-sealed-on-both-sides-sku-61908-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 62mm width 12mm shielded on both sides SKU: 61908-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-62mm-width-12mm-shielded-on-both-sides-sku-61908-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 55mm width 10mm sealed on both sides SKU: 61907-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-55mm-width-10mm-sealed-on-both-sides-sku-61907-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 55mm width 10mm shielded on both sides SKU: 61907-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-55mm-width-10mm-shielded-on-both-sides-sku-61907-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 47mm width 9mm sealed on both sides SKU: 61906-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-47mm-width-9mm-sealed-on-both-sides-sku-61906-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 47mm width 9mm shielded on both sides SKU: 61906-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-47mm-width-9mm-shielded-on-both-sides-sku-61906-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 42mm width 9mm sealed on both sides SKU: 61905-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-42mm-width-9mm-sealed-on-both-sides-sku-61905-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 42mm width 9mm shielded on both sides SKU: 61905-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-42mm-width-9mm-shielded-on-both-sides-sku-61905-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 37mm width 9mm sealed on both sides SKU: 61904-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-37mm-width-9mm-sealed-on-both-sides-sku-61904-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 37mm width 9mm shielded on both sides SKU: 61904-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-37mm-width-9mm-shielded-on-both-sides-sku-61904-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 30mm width 7mm sealed on both sides SKU: 61903-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-30mm-width-7mm-sealed-on-both-sides-sku-61903-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 30mm width 7mm shielded on both sides SKU: 61903-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-30mm-width-7mm-shielded-on-both-sides-sku-61903-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 28mm width 7mm sealed on both sides SKU: 61902-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-28mm-width-7mm-sealed-on-both-sides-sku-61902-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 28mm width 7mm shielded on both sides SKU: 61902-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-28mm-width-7mm-shielded-on-both-sides-sku-61902-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 24mm width 6mm sealed on both sides SKU: 61901-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-24mm-width-6mm-sealed-on-both-sides-sku-61901-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 24mm width 6mm shielded on both sides SKU: 61901-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-24mm-width-6mm-shielded-on-both-sides-sku-61901-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 22mm width 6mm sealed on both sides SKU: 61900-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-22mm-width-6mm-sealed-on-both-sides-sku-61900-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 22mm width 6mm sealed on both sides clearance C3 SKU: 61900-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-22mm-width-6mm-sealed-on-both-sides-clearance-c3-sku-61900-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 22mm width 6mm shielded on both sides SKU: 61900-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-22mm-width-6mm-shielded-on-both-sides-sku-61900-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 22mm width 6mm shielded on both sides clearance C3 SKU: 61900-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-22mm-width-6mm-shielded-on-both-sides-clearance-c3-sku-61900-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 58mm width 7mm sealed on both sides SKU: 61809-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-58mm-width-7mm-sealed-on-both-sides-sku-61809-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 58mm width 7mm shielded on both sides SKU: 61809-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-58mm-width-7mm-shielded-on-both-sides-sku-61809-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 52mm width 7mm sealed on both sides alternative marking 6808 SKU: 61808-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-52mm-width-7mm-sealed-on-both-sides-alternative-marking-6808-sku-61808-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 47mm width 7mm sealed on both sides alternative marking 6807 SKU: 61807-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-47mm-width-7mm-sealed-on-both-sides-alternative-marking-6807-sku-61807-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 42mm width 7mm sealed on both sides SKU: 61806-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-42mm-width-7mm-sealed-on-both-sides-sku-61806-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 42mm width 7mm shielded on both sides SKU: 61806-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-42mm-width-7mm-shielded-on-both-sides-sku-61806-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 37mm width 7mm sealed on both sides SKU: 61805-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-37mm-width-7mm-sealed-on-both-sides-sku-61805-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 37mm width 7mm shielded on both sides SKU: 61805-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-37mm-width-7mm-shielded-on-both-sides-sku-61805-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 32mm width 7mm sealed on both sides SKU: 61804-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-32mm-width-7mm-sealed-on-both-sides-sku-61804-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 32mm width 7mm sealed on both sides clearance C3 SKU: 61804-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-32mm-width-7mm-sealed-on-both-sides-clearance-c3-sku-61804-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 32mm width 7mm shielded on both sides SKU: 61804-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-32mm-width-7mm-shielded-on-both-sides-sku-61804-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 32mm width 7mm shielded on both sides clearance C3 SKU: 61804-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-32mm-width-7mm-shielded-on-both-sides-clearance-c3-sku-61804-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 26mm width 5mm shielded on both sides SKU: 61803-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-26mm-width-5mm-shielded-on-both-sides-sku-61803-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 26mm width 5mm sealed on both sides SKU: 61803-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-26mm-width-5mm-sealed-on-both-sides-sku-61803-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 26mm width 5mm sealed on both sides SKU: 61803-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-26mm-width-5mm-sealed-on-both-sides-sku-61803-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 26mm width 5mm shielded on both sides SKU: 61803-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-26mm-width-5mm-shielded-on-both-sides-sku-61803-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm shielded on both sides SKU: 61802-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-shielded-on-both-sides-sku-61802-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm sealed on both sides SKU: 61802-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-sealed-on-both-sides-sku-61802-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm sealed on both sides SKU: 61802-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-sealed-on-both-sides-sku-61802-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm sealed on both sides clearance C3 SKU: 61802-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-sealed-on-both-sides-clearance-c3-sku-61802-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm shielded on both sides SKU: 61802-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-shielded-on-both-sides-sku-61802-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm shielded on both sides clearance C3 SKU: 61802-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-61802-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm shielded on both sides SKU: 61801-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-shielded-on-both-sides-sku-61801-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm sealed on both sides SKU: 61801-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-sealed-on-both-sides-sku-61801-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm sealed on both sides SKU: 61801-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-sealed-on-both-sides-sku-61801-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm sealed on both sides clearance C3 SKU: 61801-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-sealed-on-both-sides-clearance-c3-sku-61801-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm shielded on both sides SKU: 61801-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-shielded-on-both-sides-sku-61801-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm shielded on both sides clearance C3 SKU: 61801-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-61801-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm open (unsealed) SKU: 61801-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-open-unsealed-sku-61801-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm shielded on both sides SKU: 61800-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-shielded-on-both-sides-sku-61800-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm sealed on both sides SKU: 61800-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-sealed-on-both-sides-sku-61800-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm sealed on both sides SKU: 61800-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-sealed-on-both-sides-sku-61800-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm sealed on both sides clearance C3 SKU: 61800-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-sealed-on-both-sides-clearance-c3-sku-61800-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm shielded on both sides SKU: 61800-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-shielded-on-both-sides-sku-61800-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm shielded on both sides clearance C3 SKU: 61800-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-61800-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm open (unsealed) SKU: 61800-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-open-unsealed-sku-61800-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [Locking assembly COM-A stainless steel 1.4401 bore 50mm size 50-80 SKU: 61599550](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-50mm-size-50-80-sku-61599550/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Very short version. Also suitable for small hub diameters. Not self-centering. Not self-locking. Axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 45mm size 45-75 SKU: 61599545](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-45mm-size-45-75-sku-61599545/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 40mm size 40-65 SKU: 61599540](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-40mm-size-40-65-sku-61599540/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 38mm size 38-65 SKU: 61599538](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-38mm-size-38-65-sku-61599538/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 30mm size 30-55 SKU: 61599530](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-30mm-size-30-55-sku-61599530/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 24mm size 24-50 SKU: 61599524](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-24mm-size-24-50-sku-61599524/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 22mm size 22-47 SKU: 61599522](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-22mm-size-22-47-sku-61599522/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 20mm size 20-47 SKU: 61599520](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-20mm-size-20-47-sku-61599520/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 19mm size 19-47 SKU: 61599519](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-19mm-size-19-47-sku-61599519/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 18mm size 18-47 SKU: 61599518](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-18mm-size-18-47-sku-61599518/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 15mm size 15-42 SKU: 61599515](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-15mm-size-15-42-sku-61599515/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 14mm size 14-42 SKU: 61599514](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-14mm-size-14-42-sku-61599514/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A bore 95mm size 95-135 SKU: 61559500](https://maedler.in/product/locking-assembly-com-a-bore-95mm-size-95-135-sku-61559500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 85mm size 85-125 SKU: 61558500](https://maedler.in/product/locking-assembly-com-a-bore-85mm-size-85-125-sku-61558500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 80mm size 80-120 SKU: 61558000](https://maedler.in/product/locking-assembly-com-a-bore-80mm-size-80-120-sku-61558000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 75mm size 75-115 SKU: 61557500](https://maedler.in/product/locking-assembly-com-a-bore-75mm-size-75-115-sku-61557500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 70mm size 70-110 SKU: 61557000](https://maedler.in/product/locking-assembly-com-a-bore-70mm-size-70-110-sku-61557000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 65mm size 65-95 SKU: 61556500](https://maedler.in/product/locking-assembly-com-a-bore-65mm-size-65-95-sku-61556500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 60mm size 60-90 SKU: 61556000](https://maedler.in/product/locking-assembly-com-a-bore-60mm-size-60-90-sku-61556000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 48mm size 48-80 SKU: 61554800](https://maedler.in/product/locking-assembly-com-a-bore-48mm-size-48-80-sku-61554800/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 45mm size 45-75 SKU: 61554500](https://maedler.in/product/locking-assembly-com-a-bore-45mm-size-45-75-sku-61554500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 32mm size 32-60 SKU: 61553200](https://maedler.in/product/locking-assembly-com-a-bore-32mm-size-32-60-sku-61553200/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 30mm size 30-55 SKU: 61553000](https://maedler.in/product/locking-assembly-com-a-bore-30mm-size-30-55-sku-61553000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 25mm size 25-50 SKU: 61552500](https://maedler.in/product/locking-assembly-com-a-bore-25mm-size-25-50-sku-61552500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 24mm size 24-50 SKU: 61552400](https://maedler.in/product/locking-assembly-com-a-bore-24mm-size-24-50-sku-61552400/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 22mm size 22-47 SKU: 61552200](https://maedler.in/product/locking-assembly-com-a-bore-22mm-size-22-47-sku-61552200/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 20mm size 20-47 SKU: 61552000](https://maedler.in/product/locking-assembly-com-a-bore-20mm-size-20-47-sku-61552000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 19mm size 19-47 SKU: 61551900](https://maedler.in/product/locking-assembly-com-a-bore-19mm-size-19-47-sku-61551900/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 17mm size 17-44 SKU: 61551700](https://maedler.in/product/locking-assembly-com-a-bore-17mm-size-17-44-sku-61551700/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 15mm size 15-42 SKU: 61551500](https://maedler.in/product/locking-assembly-com-a-bore-15mm-size-15-42-sku-61551500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 14mm size 14-42 SKU: 61551400](https://maedler.in/product/locking-assembly-com-a-bore-14mm-size-14-42-sku-61551400/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 100mm size 100x145x33mm SKU: 61530100](https://maedler.in/product/locking-assembly-com-as-bore-100mm-size-100x145x33mm-sku-61530100/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 95mm size 95x135x28mm SKU: 61530095](https://maedler.in/product/locking-assembly-com-as-bore-95mm-size-95x135x28mm-sku-61530095/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 90mm size 90x130x28mm SKU: 61530090](https://maedler.in/product/locking-assembly-com-as-bore-90mm-size-90x130x28mm-sku-61530090/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 80mm size 80x120x28mm SKU: 61530080](https://maedler.in/product/locking-assembly-com-as-bore-80mm-size-80x120x28mm-sku-61530080/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 70mm size 70x110x28mm SKU: 61530070](https://maedler.in/product/locking-assembly-com-as-bore-70mm-size-70x110x28mm-sku-61530070/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 60mm size 60x90x24mm SKU: 61530060](https://maedler.in/product/locking-assembly-com-as-bore-60mm-size-60x90x24mm-sku-61530060/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 55mm size 55x85x24mm SKU: 61530055](https://maedler.in/product/locking-assembly-com-as-bore-55mm-size-55x85x24mm-sku-61530055/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 50mm size 50x80x24mm SKU: 61530050](https://maedler.in/product/locking-assembly-com-as-bore-50mm-size-50x80x24mm-sku-61530050/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Very short version. Also suitable for small hub diameters. Not self-centering. Not self-locking. Axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Like COM-A, but with slotted pressure rings. Not self-centering. Self-releasing at dismounting. No axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 48mm size 48x80x24mm SKU: 61530048](https://maedler.in/product/locking-assembly-com-as-bore-48mm-size-48x80x24mm-sku-61530048/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981742](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981742/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981740](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981740/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981738](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981738/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981670](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981670/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981665](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981665/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981660](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981660/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981650](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981650/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981648](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981648/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981645](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981645/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981642](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981642/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981640](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981640/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981638](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981638/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981560](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981560/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981550](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981550/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981548](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981548/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981545](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981545/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981542](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981542/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981540](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981540/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981538](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981535](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981532](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981460](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981460/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981450](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981450/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981448](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981448/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981445](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981445/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981442](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981442/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981440](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981440/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981438](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981435](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981432](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981360](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981360/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981350](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981350/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981348](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981348/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981345](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981345/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981342](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981342/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981340](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981340/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981338](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981335](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981332](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981330](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981328](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981325](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981260](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981260/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981250](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981250/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981248](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981248/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981245](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981245/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981242](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981242/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981240](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981240/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981238](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981235](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981232](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981230](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981228](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981225](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981160](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981160/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981150](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981150/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981145](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981145/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981142](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981142/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981140](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981140/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981138](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981135](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981132](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981130](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981128](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981128/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981125](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981038](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981035](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981032](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981030](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981025](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980938](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980935](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980935/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980932](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980932/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980930](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980930/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980925](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980925/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 30 teeth material steel teeth hardened for taper bush type 3020 SKU: 10978130](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-3020-sku-10978130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 27 teeth material steel teeth hardened for taper bush type 3020 SKU: 10978127](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-3020-sku-10978127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 25 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978125](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 23 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978123](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 21 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978121](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 19 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978119](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 17 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978117](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 15 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978115](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 13 teeth material steel teeth hardened for taper bush type 2012 SKU: 10978113](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10978113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 76 teeth material cast iron for taper bush typ 3020 SKU: 10977176G](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-76-teeth-material-cast-iron-for-taper-bush-typ-3020-sku-10977176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 76 teeth material steel for taper bush typ 3020 SKU: 10977176](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-76-teeth-material-steel-for-taper-bush-typ-3020-sku-10977176/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 57 teeth material cast iron for taper bush typ 3020 SKU: 10977157G](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-57-teeth-material-cast-iron-for-taper-bush-typ-3020-sku-10977157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 57 teeth material steel for taper bush typ 3020 SKU: 10977157](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-57-teeth-material-steel-for-taper-bush-typ-3020-sku-10977157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 45 teeth material steel for taper bush typ 3020 SKU: 10977145](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-45-teeth-material-steel-for-taper-bush-typ-3020-sku-10977145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 38 teeth material cast iron for taper bush typ 3020 SKU: 10977138G](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-38-teeth-material-cast-iron-for-taper-bush-typ-3020-sku-10977138g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 38 teeth material steel for taper bush typ 3020 SKU: 10977138](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-38-teeth-material-steel-for-taper-bush-typ-3020-sku-10977138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 36 teeth material steel for taper bush typ 3020 SKU: 10977136](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-36-teeth-material-steel-for-taper-bush-typ-3020-sku-10977136/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 30 teeth material steel for taper bush typ 3020 SKU: 10977130](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-30-teeth-material-steel-for-taper-bush-typ-3020-sku-10977130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 27 teeth material steel for taper bush typ 3020 SKU: 10977127](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-27-teeth-material-steel-for-taper-bush-typ-3020-sku-10977127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 25 teeth material steel for taper bush typ 2517 SKU: 10977125](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-25-teeth-material-steel-for-taper-bush-typ-2517-sku-10977125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 24 teeth material steel for taper bush typ 2517 SKU: 10977124](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-24-teeth-material-steel-for-taper-bush-typ-2517-sku-10977124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 23 teeth material steel for taper bush typ 2517 SKU: 10977123](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-23-teeth-material-steel-for-taper-bush-typ-2517-sku-10977123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 22 teeth material steel for taper bush typ 2517 SKU: 10977122](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-22-teeth-material-steel-for-taper-bush-typ-2517-sku-10977122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 21 teeth material steel for taper bush typ 2517 SKU: 10977121](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-21-teeth-material-steel-for-taper-bush-typ-2517-sku-10977121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 20 teeth material steel for taper bush typ 2517 SKU: 10977120](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-20-teeth-material-steel-for-taper-bush-typ-2517-sku-10977120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm open (unsealed) SKU: 6206-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-open-unsealed-sku-6206-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm open (unsealed) clearance C3 SKU: 6206-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-open-unsealed-clearance-c3-sku-6206-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Pillow block bearing igus igubal ESTM-30 bore 30mm SKU: 62055130](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-30-bore-30mm-sku-62055130/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-25 bore 25mm SKU: 62055125](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-25-bore-25mm-sku-62055125/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-20 bore 20mm SKU: 62055120](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-20-bore-20mm-sku-62055120/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-16 bore 16mm SKU: 62055116](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-16-bore-16mm-sku-62055116/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-12 bore 12mm SKU: 62055112](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-12-bore-12mm-sku-62055112/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-10 bore 10mm SKU: 62055110](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-10-bore-10mm-sku-62055110/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-08 bore 8mm SKU: 62055108](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-08-bore-8mm-sku-62055108/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal KSTM-25 bore 25mm SKU: 62055025](https://maedler.in/product/pillow-block-bearing-igus-igubal-kstm-25-bore-25mm-sku-62055025/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal KSTM-20 bore 20mm SKU: 62055020](https://maedler.in/product/pillow-block-bearing-igus-igubal-kstm-20-bore-20mm-sku-62055020/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal KSTM-10 bore 10mm SKU: 62055010](https://maedler.in/product/pillow-block-bearing-igus-igubal-kstm-10-bore-10mm-sku-62055010/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm shielded on both sides SKU: 6205-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-sku-6205-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm shielded on both sides clearance C3 SKU: 6205-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-clearance-c3-sku-6205-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm sealed on both sides SKU: 6205-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-sku-6205-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm sealed on both sides SKU: 6205-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-sku-6205-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm sealed on both sides clearance C3 SKU: 6205-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-clearance-c3-sku-6205-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm sealed on both sides clearance C3 SKU: 6205-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-clearance-c3-sku-6205-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm shielded on both sides SKU: 6205-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-sku-6205-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm shielded on both sides clearance C3 SKU: 6205-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-clearance-c3-sku-6205-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm open (unsealed) SKU: 6205-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-open-unsealed-sku-6205-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm open (unsealed) clearance C3 SKU: 6205-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-open-unsealed-clearance-c3-sku-6205-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm shielded on both sides SKU: 6204-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-sku-6204-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm shielded on both sides clearance C3 SKU: 6204-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-clearance-c3-sku-6204-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm sealed on both sides SKU: 6204-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-sku-6204-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm sealed on both sides SKU: 6204-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-sku-6204-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm sealed on both sides clearance C3 SKU: 6204-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-clearance-c3-sku-6204-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm sealed on both sides clearance C3 SKU: 6204-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-clearance-c3-sku-6204-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm shielded on both sides SKU: 6204-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-sku-6204-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm shielded on both sides clearance C3 SKU: 6204-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-clearance-c3-sku-6204-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm open (unsealed) SKU: 6204-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-open-unsealed-sku-6204-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm open (unsealed) clearance C3 SKU: 6204-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-open-unsealed-clearance-c3-sku-6204-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 80mm D10 SKU: 62038000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-80mm-d10-sku-62038000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 70mm D10 SKU: 62037000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-70mm-d10-sku-62037000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 60mm D10 SKU: 62036000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-60mm-d10-sku-62036000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 50mm D10 SKU: 62035000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-50mm-d10-sku-62035000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 45mm D10 SKU: 62034500](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-45mm-d10-sku-62034500/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 40mm D10 SKU: 62034000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-40mm-d10-sku-62034000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 35mm D10 SKU: 62033500](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-35mm-d10-sku-62033500/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 30mm D10 SKU: 62033000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-30mm-d10-sku-62033000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 25mm D10 SKU: 62032500](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-25mm-d10-sku-62032500/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm shielded on both sides SKU: 6203-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-shielded-on-both-sides-sku-6203-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm shielded on both sides clearance C3 SKU: 6203-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6203-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm sealed on both sides SKU: 6203-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sealed-on-both-sides-sku-6203-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm sealed on both sides SKU: 6203-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sealed-on-both-sides-sku-6203-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm sealed on both sides clearance C3 SKU: 6203-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6203-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm sealed on both sides clearance C3 SKU: 6203-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6203-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm shielded on both sides SKU: 6203-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-shielded-on-both-sides-sku-6203-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm shielded on both sides clearance C3 SKU: 6203-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6203-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm open (unsealed) SKU: 6203-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-open-unsealed-sku-6203-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm open (unsealed) clearance C3 SKU: 6203-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-open-unsealed-clearance-c3-sku-6203-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 80mm D10 material grey cast iron SKU: 62028000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-80mm-d10-material-grey-cast-iron-sku-62028000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 70mm D10 material grey cast iron SKU: 62027000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-70mm-d10-material-grey-cast-iron-sku-62027000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 60mm D10 material grey cast iron SKU: 62026000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-60mm-d10-material-grey-cast-iron-sku-62026000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 50mm D10 material grey cast iron SKU: 62025000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-50mm-d10-material-grey-cast-iron-sku-62025000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 45mm D10 material grey cast iron SKU: 62024500](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-45mm-d10-material-grey-cast-iron-sku-62024500/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 40mm D10 material grey cast iron SKU: 62024000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-40mm-d10-material-grey-cast-iron-sku-62024000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 35mm D10 material grey cast iron SKU: 62023500](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-35mm-d10-material-grey-cast-iron-sku-62023500/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 30mm D10 material grey cast iron SKU: 62023000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-30mm-d10-material-grey-cast-iron-sku-62023000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 25mm D10 material grey cast iron SKU: 62022500](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-25mm-d10-material-grey-cast-iron-sku-62022500/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 20mm D10 material grey cast iron SKU: 62022000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-20mm-d10-material-grey-cast-iron-sku-62022000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm shielded on both sides SKU: 6202-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-sku-6202-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm shielded on both sides clearance C3 SKU: 6202-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-clearance-c3-sku-6202-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm sealed on both sides SKU: 6202-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-sku-6202-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm sealed on both sides SKU: 6202-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-sku-6202-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm sealed on both sides clearance C3 SKU: 6202-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-clearance-c3-sku-6202-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm sealed on both sides clearance C3 SKU: 6202-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-clearance-c3-sku-6202-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm shielded on both sides SKU: 6202-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-sku-6202-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm shielded on both sides clearance C3 SKU: 6202-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-clearance-c3-sku-6202-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm open (unsealed) SKU: 6202-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-open-unsealed-sku-6202-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm open (unsealed) clearance C3 SKU: 6202-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-open-unsealed-clearance-c3-sku-6202-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 80mm D10 material grey cast iron SKU: 62018000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-80mm-d10-material-grey-cast-iron-sku-62018000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 70mm D10 material grey cast iron SKU: 62017000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-70mm-d10-material-grey-cast-iron-sku-62017000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 60mm D10 material grey cast iron SKU: 62016000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-60mm-d10-material-grey-cast-iron-sku-62016000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 50mm D10 material grey cast iron SKU: 62015000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-50mm-d10-material-grey-cast-iron-sku-62015000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 40mm D10 material grey cast iron SKU: 62014000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-40mm-d10-material-grey-cast-iron-sku-62014000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 30mm D10 material grey cast iron SKU: 62013000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-30mm-d10-material-grey-cast-iron-sku-62013000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm shielded on both sides SKU: 6201-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-shielded-on-both-sides-sku-6201-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm shielded on both sides clearance C3 SKU: 6201-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-shielded-on-both-sides-clearance-c3-sku-6201-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm sealed on both sides SKU: 6201-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sealed-on-both-sides-sku-6201-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm sealed on both sides SKU: 6201-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sealed-on-both-sides-sku-6201-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm sealed on both sides clearance C3 SKU: 6201-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sealed-on-both-sides-clearance-c3-sku-6201-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm sealed on both sides clearance C3 SKU: 6201-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sealed-on-both-sides-clearance-c3-sku-6201-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm shielded on both sides SKU: 6201-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-shielded-on-both-sides-sku-6201-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm shielded on both sides clearance C3 SKU: 6201-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-shielded-on-both-sides-clearance-c3-sku-6201-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm open (unsealed) SKU: 6201-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-open-unsealed-sku-6201-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm open (unsealed) clearance C3 SKU: 6201-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-open-unsealed-clearance-c3-sku-6201-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Light-duty pillow block bearing HM bore 40mm D9 material grey cast iron SKU: 62004000](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-40mm-d9-material-grey-cast-iron-sku-62004000/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [Light-duty pillow block bearing HM bore 35mm D9 material grey cast iron SKU: 62003500](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-35mm-d9-material-grey-cast-iron-sku-62003500/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [Light-duty pillow block bearing HM bore 30mm D9 material grey cast iron SKU: 62003000](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-30mm-d9-material-grey-cast-iron-sku-62003000/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [Light-duty pillow block bearing HM bore 25mm D9 material grey cast iron SKU: 62002500](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-25mm-d9-material-grey-cast-iron-sku-62002500/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [Light-duty pillow block bearing HM bore 20mm D9 material grey cast iron SKU: 62002000](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-20mm-d9-material-grey-cast-iron-sku-62002000/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm shielded on both sides SKU: 6200-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-shielded-on-both-sides-sku-6200-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm shielded on both sides clearance C3 SKU: 6200-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-shielded-on-both-sides-clearance-c3-sku-6200-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm sealed on both sides SKU: 6200-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sealed-on-both-sides-sku-6200-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm sealed on both sides SKU: 6200-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sealed-on-both-sides-sku-6200-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm sealed on both sides clearance C3 SKU: 6200-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sealed-on-both-sides-clearance-c3-sku-6200-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm sealed on both sides clearance C3 SKU: 6200-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sealed-on-both-sides-clearance-c3-sku-6200-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Light-duty pillow block bearing HM bore 15mm D9 material grey cast iron SKU: 62001500](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-15mm-d9-material-grey-cast-iron-sku-62001500/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm shielded on both sides SKU: 6200-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-shielded-on-both-sides-sku-6200-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 28 teeth material steel SKU: 12012800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-28-teeth-material-steel-sku-12012800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 27 teeth material steel SKU: 12012700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-27-teeth-material-steel-sku-12012700/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 26 teeth material steel SKU: 12012600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-26-teeth-material-steel-sku-12012600/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 25 teeth material steel SKU: 12012500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-25-teeth-material-steel-sku-12012500/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 24 teeth material steel SKU: 12012400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-24-teeth-material-steel-sku-12012400/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 23 teeth material steel SKU: 12012300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-23-teeth-material-steel-sku-12012300/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 22 teeth material steel SKU: 12012200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-22-teeth-material-steel-sku-12012200/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 21 teeth material steel SKU: 12012100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-21-teeth-material-steel-sku-12012100/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 20 teeth material steel SKU: 12012000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-20-teeth-material-steel-sku-12012000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 19 teeth material steel SKU: 12011900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-19-teeth-material-steel-sku-12011900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 18 teeth material steel SKU: 12011800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-18-teeth-material-steel-sku-12011800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 17 teeth material steel SKU: 12011700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-17-teeth-material-steel-sku-12011700/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 16 teeth material steel SKU: 12011600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-16-teeth-material-steel-sku-12011600/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 15 teeth material steel SKU: 12011500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-15-teeth-material-steel-sku-12011500/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 14 teeth material steel SKU: 12011400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-14-teeth-material-steel-sku-12011400/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 13 teeth material steel SKU: 12011300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-13-teeth-material-steel-sku-12011300/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 12 teeth material steel SKU: 12011200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-12-teeth-material-steel-sku-12011200/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 11 teeth material steel SKU: 12011100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-11-teeth-material-steel-sku-12011100/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 10 teeth material steel SKU: 12011000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-10-teeth-material-steel-sku-12011000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 9 teeth material steel SKU: 12010900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-9-teeth-material-steel-sku-12010900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 8 teeth material steel SKU: 12010800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-8-teeth-material-steel-sku-12010800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRT 24 B-1 1 1/2" x 1" 57 teeth material cast iron for taper bush typ 3030 SKU: 11077157G](https://maedler.in/product/sprocket-krt-24-b-1-1-1-2-x-1-57-teeth-material-cast-iron-for-taper-bush-typ-3030-sku-11077157g/): Material: Grey cast iron GG25. The teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 24 B-1 1 1/2" x 1" 38 teeth material cast iron for taper bush typ 3030 SKU: 11077138G](https://maedler.in/product/sprocket-krt-24-b-1-1-1-2-x-1-38-teeth-material-cast-iron-for-taper-bush-typ-3030-sku-11077138g/): Material: Grey cast iron GG25. The teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 57 teeth material steel SKU: 11025700](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-57-teeth-material-steel-sku-11025700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 54 teeth material steel SKU: 11025400](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-54-teeth-material-steel-sku-11025400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 48 teeth material steel SKU: 11024800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-48-teeth-material-steel-sku-11024800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 45 teeth material steel SKU: 11024500](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-45-teeth-material-steel-sku-11024500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 38 teeth material steel SKU: 11023800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-38-teeth-material-steel-sku-11023800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 35 teeth material steel SKU: 11023500](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-35-teeth-material-steel-sku-11023500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 30 teeth material steel SKU: 11023000](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-30-teeth-material-steel-sku-11023000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 28 teeth material steel SKU: 11022800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-28-teeth-material-steel-sku-11022800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 24 teeth material steel SKU: 11022400](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-24-teeth-material-steel-sku-11022400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 22 teeth material steel SKU: 11022200](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-22-teeth-material-steel-sku-11022200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 20 teeth material steel SKU: 11022000](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-20-teeth-material-steel-sku-11022000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 18 teeth material steel SKU: 11021800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-18-teeth-material-steel-sku-11021800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 16 teeth material steel SKU: 11021600](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-16-teeth-material-steel-sku-11021600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 15 teeth material steel SKU: 11021500](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-15-teeth-material-steel-sku-11021500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 14 teeth material steel SKU: 11021400](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-14-teeth-material-steel-sku-11021400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 13 teeth material steel SKU: 11021300](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-13-teeth-material-steel-sku-11021300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 12 teeth material steel SKU: 11021200](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-12-teeth-material-steel-sku-11021200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 11 teeth material steel SKU: 11021100](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-11-teeth-material-steel-sku-11021100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 10 teeth material steel SKU: 11021000](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-10-teeth-material-steel-sku-11021000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 57 teeth material cast iron SKU: 11015700](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-57-teeth-material-cast-iron-sku-11015700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 45 teeth material cast iron SKU: 11014500](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-45-teeth-material-cast-iron-sku-11014500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 38 teeth material steel SKU: 11013800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-38-teeth-material-steel-sku-11013800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 30 teeth material steel SKU: 11013000](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-30-teeth-material-steel-sku-11013000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 28 teeth material steel SKU: 11012800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-28-teeth-material-steel-sku-11012800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 25 teeth material steel SKU: 11012500](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-25-teeth-material-steel-sku-11012500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 23 teeth material steel SKU: 11012300](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-23-teeth-material-steel-sku-11012300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 21 teeth material steel SKU: 11012100](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-21-teeth-material-steel-sku-11012100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 20 teeth material steel SKU: 11012000](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-20-teeth-material-steel-sku-11012000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 19 teeth material steel SKU: 11011900](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-19-teeth-material-steel-sku-11011900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 18 teeth material steel SKU: 11011800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-18-teeth-material-steel-sku-11011800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 17 teeth material steel SKU: 11011700](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-17-teeth-material-steel-sku-11011700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 16 teeth material steel SKU: 11011600](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-16-teeth-material-steel-sku-11011600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 15 teeth material steel SKU: 11011500](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-15-teeth-material-steel-sku-11011500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 14 teeth material steel SKU: 11011400](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-14-teeth-material-steel-sku-11011400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 13 teeth material steel SKU: 11011300](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-13-teeth-material-steel-sku-11011300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 12 teeth material steel SKU: 11011200](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-12-teeth-material-steel-sku-11011200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 11 teeth material steel SKU: 11011100](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-11-teeth-material-steel-sku-11011100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 10 teeth material steel SKU: 11011000](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-10-teeth-material-steel-sku-11011000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 8 teeth material steel SKU: 11010800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-8-teeth-material-steel-sku-11010800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999125](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999120](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999115](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999113](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999112](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982070](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982070/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982065](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982065/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982060](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982060/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982050](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982050/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982048](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982048/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982045](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982045/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982042](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982042/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982040](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982040/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982038](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981970](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981970/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981965](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981965/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981960](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981960/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981950](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981950/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981948](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981948/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981945](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981945/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981942](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981942/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981940](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981940/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981938](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981870](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981870/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981865](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981865/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981860](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981860/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981850](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981850/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981848](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981848/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981845](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981845/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981842](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981842/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981840](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981840/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981838](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981838/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981770](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981770/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981765](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981765/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981760](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981760/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981750](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981750/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981748](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981748/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981745](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981745/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [drill bushing (guide bushing) similar DIN 172 - A 1,9 x 9 SKU: 622101909](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-19-x-9-sku-622101909/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,9 x 6 SKU: 622101906](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-19-x-6-sku-622101906/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,8 x 9 SKU: 622101809](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-18-x-9-sku-622101809/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,8 x 6 SKU: 622101806](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-18-x-6-sku-622101806/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,7 x 9 SKU: 622101709](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-17-x-9-sku-622101709/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,7 x 6 SKU: 622101706](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-17-x-6-sku-622101706/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,6 x 9 SKU: 622101609](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-16-x-9-sku-622101609/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,6 x 6 SKU: 622101606](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-16-x-6-sku-622101606/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,5 x 9 SKU: 622101509](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-15-x-9-sku-622101509/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,5 x 6 SKU: 622101506](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-15-x-6-sku-622101506/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,4 x 9 SKU: 622101409](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-14-x-9-sku-622101409/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,4 x 6 SKU: 622101406](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-14-x-6-sku-622101406/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,3 x 9 SKU: 622101309](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-13-x-9-sku-622101309/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,3 x 6 SKU: 622101306](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-13-x-6-sku-622101306/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,2 x 9 SKU: 622101209](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-12-x-9-sku-622101209/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,2 x 6 SKU: 622101206](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-12-x-6-sku-622101206/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,1 x 9 SKU: 622101109](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-11-x-9-sku-622101109/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1,1 x 6 SKU: 622101106](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-11-x-6-sku-622101106/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1 x 9 SKU: 62210109](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-1-x-9-sku-62210109/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 1 x 6 SKU: 62210106](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-1-x-6-sku-62210106/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 0,9 x 9 SKU: 622100909](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-09-x-9-sku-622100909/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 0,9 x 6 SKU: 622100906](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-09-x-6-sku-622100906/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 0,8 x 6 SKU: 622100806](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-08-x-6-sku-622100806/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 0,7 x 6 SKU: 622100706](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-07-x-6-sku-622100706/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 0,6 x 6 SKU: 622100606](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-06-x-6-sku-622100606/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Flange block bearing igus igubal EFOM-30 2 mounting holes bore 30mm SKU: 62155130](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-30-2-mounting-holes-bore-30mm-sku-62155130/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-25 2 mounting holes bore 25mm SKU: 62155125](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-25-2-mounting-holes-bore-25mm-sku-62155125/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-20 2 mounting holes bore 20mm SKU: 62155120](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-20-2-mounting-holes-bore-20mm-sku-62155120/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-17 2 mounting holes bore 17mm SKU: 62155117](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-17-2-mounting-holes-bore-17mm-sku-62155117/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-16 2 mounting holes bore 16mm SKU: 62155116](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-16-2-mounting-holes-bore-16mm-sku-62155116/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-15 2 mounting holes bore 15mm SKU: 62155115](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-15-2-mounting-holes-bore-15mm-sku-62155115/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-12 2 mounting holes bore 12mm SKU: 62155112](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-12-2-mounting-holes-bore-12mm-sku-62155112/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-10 2 mounting holes bore 10mm SKU: 62155110](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-10-2-mounting-holes-bore-10mm-sku-62155110/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-08 2 mounting holes bore 8mm SKU: 62155108](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-08-2-mounting-holes-bore-8mm-sku-62155108/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-06 2 mounting holes bore 6mm SKU: 62155106](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-06-2-mounting-holes-bore-6mm-sku-62155106/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-05 2 mounting holes bore 5mm SKU: 62155105](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-05-2-mounting-holes-bore-5mm-sku-62155105/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFOM-04 2 mounting holes bore 4mm SKU: 62155104](https://maedler.in/product/flange-block-bearing-igus-igubal-efom-04-2-mounting-holes-bore-4mm-sku-62155104/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-30 4 mounting holes bore 30mm SKU: 62155030](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-30-4-mounting-holes-bore-30mm-sku-62155030/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-25 4 mounting holes bore 25mm SKU: 62155025](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-25-4-mounting-holes-bore-25mm-sku-62155025/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-20 4 mounting holes bore 20mm SKU: 62155020](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-20-4-mounting-holes-bore-20mm-sku-62155020/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-17 4 mounting holes bore 17mm SKU: 62155017](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-17-4-mounting-holes-bore-17mm-sku-62155017/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-16 4 mounting holes bore 16mm SKU: 62155016](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-16-4-mounting-holes-bore-16mm-sku-62155016/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-15 4 mounting holes bore 15mm SKU: 62155015](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-15-4-mounting-holes-bore-15mm-sku-62155015/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-12 4 mounting holes bore 12mm SKU: 62155012](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-12-4-mounting-holes-bore-12mm-sku-62155012/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-10 4 mounting holes bore 10mm SKU: 62155010](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-10-4-mounting-holes-bore-10mm-sku-62155010/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-08 4 mounting holes bore 8mm SKU: 62155008](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-08-4-mounting-holes-bore-8mm-sku-62155008/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-06 4 mounting holes bore 6mm SKU: 62155006](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-06-4-mounting-holes-bore-6mm-sku-62155006/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-05 4 mounting holes bore 5mm SKU: 62155005](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-05-4-mounting-holes-bore-5mm-sku-62155005/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange block bearing igus igubal EFSM-04 4 mounting holes bore 4mm SKU: 62155004](https://maedler.in/product/flange-block-bearing-igus-igubal-efsm-04-4-mounting-holes-bore-4mm-sku-62155004/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Flange bearing DIN 503 A with red brass bush bore 80mm D10 material grey cast iron SKU: 62128000](https://maedler.in/product/flange-bearing-din-503-a-with-red-brass-bush-bore-80mm-d10-material-grey-cast-iron-sku-62128000/): Material: Grey Cast Iron GG25. Bush red brass RG7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Flange bearing DIN 503 A with red brass bush bore 70mm D10 material grey cast iron SKU: 62127000](https://maedler.in/product/flange-bearing-din-503-a-with-red-brass-bush-bore-70mm-d10-material-grey-cast-iron-sku-62127000/): Material: Grey Cast Iron GG25. Bush red brass RG7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Flange bearing DIN 503 A with red brass bush bore 60mm D10 material grey cast iron SKU: 62126000](https://maedler.in/product/flange-bearing-din-503-a-with-red-brass-bush-bore-60mm-d10-material-grey-cast-iron-sku-62126000/): Material: Grey Cast Iron GG25. Bush red brass RG7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Flange bearing DIN 503 A with red brass bush bore 50mm D10 material grey cast iron SKU: 62125000](https://maedler.in/product/flange-bearing-din-503-a-with-red-brass-bush-bore-50mm-d10-material-grey-cast-iron-sku-62125000/): Material: Grey Cast Iron GG25. Bush red brass RG7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Flange bearing DIN 503 A with red brass bush bore 40mm D10 material grey cast iron SKU: 62124000](https://maedler.in/product/flange-bearing-din-503-a-with-red-brass-bush-bore-40mm-d10-material-grey-cast-iron-sku-62124000/): Material: Grey Cast Iron GG25. Bush red brass RG7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Flange bearing DIN 502 B without bush bore 40mm D7 material grey cast iron SKU: 62114000](https://maedler.in/product/flange-bearing-din-502-b-without-bush-bore-40mm-d7-material-grey-cast-iron-sku-62114000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Flange bearing DIN 502 B without bush bore 35mm D7 material grey cast iron SKU: 62113500](https://maedler.in/product/flange-bearing-din-502-b-without-bush-bore-35mm-d7-material-grey-cast-iron-sku-62113500/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Flange bearing DIN 502 B without bush bore 30mm D7 material grey cast iron SKU: 62113000](https://maedler.in/product/flange-bearing-din-502-b-without-bush-bore-30mm-d7-material-grey-cast-iron-sku-62113000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Flange bearing DIN 502 B without bush bore 25mm D7 material grey cast iron SKU: 62112500](https://maedler.in/product/flange-bearing-din-502-b-without-bush-bore-25mm-d7-material-grey-cast-iron-sku-62112500/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Flange bearing DIN 502 A with red brass bush bore 50mm D10 material grey cast iron SKU: 62105000](https://maedler.in/product/flange-bearing-din-502-a-with-red-brass-bush-bore-50mm-d10-material-grey-cast-iron-sku-62105000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Flange bearing DIN 502 A with red brass bush bore 40mm D10 material grey cast iron SKU: 62104000](https://maedler.in/product/flange-bearing-din-502-a-with-red-brass-bush-bore-40mm-d10-material-grey-cast-iron-sku-62104000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Flange bearing DIN 502 A with red brass bush bore 30mm D10 material grey cast iron SKU: 62103000](https://maedler.in/product/flange-bearing-din-502-a-with-red-brass-bush-bore-30mm-d10-material-grey-cast-iron-sku-62103000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Flange bearing DIN 502 A with red brass bush bore 25mm D10 material grey cast iron SKU: 62102500](https://maedler.in/product/flange-bearing-din-502-a-with-red-brass-bush-bore-25mm-d10-material-grey-cast-iron-sku-62102500/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 90mm width 20mm shielded on both sides SKU: 6210-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-shielded-on-both-sides-sku-6210-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 90mm width 20mm shielded on both sides clearance C3 SKU: 6210-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-shielded-on-both-sides-clearance-c3-sku-6210-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 90mm width 20mm sealed on both sides SKU: 6210-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-sealed-on-both-sides-sku-6210-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 90mm width 20mm sealed on both sides clearance C3 SKU: 6210-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-sealed-on-both-sides-clearance-c3-sku-6210-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 50mm outer diameter 90mm width 20mm sealed on both sides SKU: 6210-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-sealed-on-both-sides-sku-6210-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 50mm outer diameter 90mm width 20mm shielded on both sides SKU: 6210-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-shielded-on-both-sides-sku-6210-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 90mm width 20mm open (unsealed) SKU: 6210-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-open-unsealed-sku-6210-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 90mm width 20mm open (unsealed) clearance C3 SKU: 6210-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-open-unsealed-clearance-c3-sku-6210-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 85mm width 19mm shielded on both sides SKU: 6209-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-shielded-on-both-sides-sku-6209-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 85mm width 19mm shielded on both sides clearance C3 SKU: 6209-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-shielded-on-both-sides-clearance-c3-sku-6209-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 85mm width 19mm sealed on both sides SKU: 6209-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-sealed-on-both-sides-sku-6209-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 85mm width 19mm sealed on both sides clearance C3 SKU: 6209-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-sealed-on-both-sides-clearance-c3-sku-6209-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 85mm width 19mm sealed on both sides SKU: 6209-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-sealed-on-both-sides-sku-6209-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 85mm width 19mm shielded on both sides SKU: 6209-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-shielded-on-both-sides-sku-6209-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 85mm width 19mm open (unsealed) SKU: 6209-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-open-unsealed-sku-6209-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 85mm width 19mm open (unsealed) clearance C3 SKU: 6209-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-open-unsealed-clearance-c3-sku-6209-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 80mm width 18mm shielded on both sides SKU: 6208-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-shielded-on-both-sides-sku-6208-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 80mm width 18mm shielded on both sides clearance C3 SKU: 6208-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-shielded-on-both-sides-clearance-c3-sku-6208-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 80mm width 18mm sealed on both sides SKU: 6208-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-sealed-on-both-sides-sku-6208-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 80mm width 18mm sealed on both sides clearance C3 SKU: 6208-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-sealed-on-both-sides-clearance-c3-sku-6208-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 80mm width 18mm sealed on both sides SKU: 6208-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-sealed-on-both-sides-sku-6208-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 80mm width 18mm shielded on both sides SKU: 6208-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-shielded-on-both-sides-sku-6208-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 80mm width 18mm open (unsealed) SKU: 6208-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-open-unsealed-sku-6208-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [clearance C3SKF deep groove ball bearing single row inner diameter 40mm outer diameter 80mm width 18mm open (unsealed) SKU: 6208-C3-SKF](https://maedler.in/product/clearance-c3skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-open-unsealed-sku-6208-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 72mm width 17mm shielded on both sides SKU: 6207-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-shielded-on-both-sides-sku-6207-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 72mm width 17mm shielded on both sides clearance C3 SKU: 6207-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-shielded-on-both-sides-clearance-c3-sku-6207-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 72mm width 17mm sealed on both sides SKU: 6207-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-sealed-on-both-sides-sku-6207-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 72mm width 17mm sealed on both sides clearance C3 SKU: 6207-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-sealed-on-both-sides-clearance-c3-sku-6207-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 72mm width 17mm sealed on both sides SKU: 6207-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-sealed-on-both-sides-sku-6207-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 72mm width 17mm shielded on both sides SKU: 6207-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-shielded-on-both-sides-sku-6207-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 72mm width 17mm open (unsealed) SKU: 6207-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-open-unsealed-sku-6207-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 72mm width 17mm open (unsealed) clearance C3 SKU: 6207-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-open-unsealed-clearance-c3-sku-6207-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm shielded on both sides SKU: 6206-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-shielded-on-both-sides-sku-6206-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm shielded on both sides clearance C3 SKU: 6206-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-shielded-on-both-sides-clearance-c3-sku-6206-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm sealed on both sides SKU: 6206-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-sealed-on-both-sides-sku-6206-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm sealed on both sides clearance C3 SKU: 6206-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-sealed-on-both-sides-clearance-c3-sku-6206-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm sealed on both sides SKU: 6206-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-sealed-on-both-sides-sku-6206-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm shielded on both sides SKU: 6206-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-shielded-on-both-sides-sku-6206-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Double sprocket ZRE for 2 single roller chains 06 B-1 13 teeth material steel SKU: 12141300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-13-teeth-material-steel-sku-12141300/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 114 teeth material steel SKU: 12128800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-114-teeth-material-steel-sku-12128800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 95 teeth material steel SKU: 12128300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-95-teeth-material-steel-sku-12128300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 76 teeth material steel SKU: 12127600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-76-teeth-material-steel-sku-12127600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 57 teeth material steel SKU: 12125700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-57-teeth-material-steel-sku-12125700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 54 teeth material steel SKU: 12125400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-54-teeth-material-steel-sku-12125400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 48 teeth material steel SKU: 12124800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-48-teeth-material-steel-sku-12124800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 45 teeth material steel SKU: 12124500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-45-teeth-material-steel-sku-12124500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 40 teeth material steel SKU: 12124000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-40-teeth-material-steel-sku-12124000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 38 teeth material steel SKU: 12123800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-38-teeth-material-steel-sku-12123800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 35 teeth material steel SKU: 12123500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-35-teeth-material-steel-sku-12123500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 32 teeth material steel SKU: 12123200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-32-teeth-material-steel-sku-12123200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 30 teeth material steel SKU: 12123000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-30-teeth-material-steel-sku-12123000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 28 teeth material steel SKU: 12122800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-28-teeth-material-steel-sku-12122800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 27 teeth material steel SKU: 12122700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-27-teeth-material-steel-sku-12122700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 26 teeth material steel SKU: 12122600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-26-teeth-material-steel-sku-12122600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 25 teeth material steel SKU: 12122500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-25-teeth-material-steel-sku-12122500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 24 teeth material steel SKU: 12122400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-24-teeth-material-steel-sku-12122400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 23 teeth material steel SKU: 12122300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-23-teeth-material-steel-sku-12122300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 21 teeth material steel SKU: 12122100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-21-teeth-material-steel-sku-12122100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 20 teeth material steel SKU: 12122000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-20-teeth-material-steel-sku-12122000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 19 teeth material steel SKU: 12121900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-19-teeth-material-steel-sku-12121900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 18 teeth material steel SKU: 12121800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-18-teeth-material-steel-sku-12121800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 17 teeth material steel SKU: 12121700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-17-teeth-material-steel-sku-12121700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 16 teeth material steel SKU: 12121600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-16-teeth-material-steel-sku-12121600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 15 teeth material steel SKU: 12121500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-15-teeth-material-steel-sku-12121500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 14 teeth material steel SKU: 12121400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-14-teeth-material-steel-sku-12121400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 13 teeth material steel SKU: 12121300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-13-teeth-material-steel-sku-12121300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 12 teeth material steel SKU: 12121200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-12-teeth-material-steel-sku-12121200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 06 B-2 3/8x7/32" 11 teeth material steel SKU: 12121100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-06-b-2-3-8x7-32-11-teeth-material-steel-sku-12121100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 76 teeth material cast iron SKU: 12117600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-76-teeth-material-cast-iron-sku-12117600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 57 teeth material cast iron SKU: 12115700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-57-teeth-material-cast-iron-sku-12115700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 45 teeth material cast iron SKU: 12114500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-45-teeth-material-cast-iron-sku-12114500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 40 teeth material steel SKU: 12114000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-40-teeth-material-steel-sku-12114000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 38 teeth material steel SKU: 12113800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-38-teeth-material-steel-sku-12113800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 35 teeth material steel SKU: 12113500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-35-teeth-material-steel-sku-12113500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 32 teeth material steel SKU: 12113200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-32-teeth-material-steel-sku-12113200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 30 teeth material steel SKU: 12113000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-30-teeth-material-steel-sku-12113000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 28 teeth material steel SKU: 12112800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-28-teeth-material-steel-sku-12112800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 27 teeth material steel SKU: 12112700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-27-teeth-material-steel-sku-12112700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 26 teeth material steel SKU: 12112600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-26-teeth-material-steel-sku-12112600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 25 teeth material steel SKU: 12112500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-25-teeth-material-steel-sku-12112500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 24 teeth material steel SKU: 12112400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-24-teeth-material-steel-sku-12112400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 23 teeth material steel SKU: 12112300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-23-teeth-material-steel-sku-12112300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 22 teeth material steel SKU: 12112200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-22-teeth-material-steel-sku-12112200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 21 teeth material steel SKU: 12112100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-21-teeth-material-steel-sku-12112100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 20 teeth material steel SKU: 12112000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-20-teeth-material-steel-sku-12112000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 19 teeth material steel SKU: 12111900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-19-teeth-material-steel-sku-12111900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 18 teeth material steel SKU: 12111800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-18-teeth-material-steel-sku-12111800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 17 teeth material steel SKU: 12111700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-17-teeth-material-steel-sku-12111700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 16 teeth material steel SKU: 12111600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-16-teeth-material-steel-sku-12111600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 15 teeth material steel SKU: 12111500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-15-teeth-material-steel-sku-12111500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 14 teeth material steel SKU: 12111400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-14-teeth-material-steel-sku-12111400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 13 teeth material steel SKU: 12111300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-13-teeth-material-steel-sku-12111300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 12 teeth material steel SKU: 12111200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-12-teeth-material-steel-sku-12111200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 11 teeth material steel SKU: 12111100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-11-teeth-material-steel-sku-12111100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 10 teeth material steel SKU: 12111000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-10-teeth-material-steel-sku-12111000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 9 teeth material steel SKU: 12110900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-9-teeth-material-steel-sku-12110900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 06 B-2 3/8x7/32" 8 teeth material steel SKU: 12110800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-06-b-2-3-8x7-32-8-teeth-material-steel-sku-12110800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B2 = 15,4 mm c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 05 B-2 pitch 8mm 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12099112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-05-b-2-pitch-8mm-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12099112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 76 teeth material steel SKU: 12027600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-76-teeth-material-steel-sku-12027600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 65 teeth material steel SKU: 12026500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-65-teeth-material-steel-sku-12026500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 60 teeth material steel SKU: 12026000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-60-teeth-material-steel-sku-12026000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 57 teeth material steel SKU: 12025700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-57-teeth-material-steel-sku-12025700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 38 teeth material steel SKU: 12023800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-38-teeth-material-steel-sku-12023800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 35 teeth material steel SKU: 12023500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-35-teeth-material-steel-sku-12023500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 32 teeth material steel SKU: 12023200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-32-teeth-material-steel-sku-12023200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 30 teeth material steel SKU: 12023000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-30-teeth-material-steel-sku-12023000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 28 teeth material steel SKU: 12022800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-28-teeth-material-steel-sku-12022800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 26 teeth material steel SKU: 12022600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-26-teeth-material-steel-sku-12022600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 25 teeth material steel SKU: 12022500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-25-teeth-material-steel-sku-12022500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 24 teeth material steel SKU: 12022400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-24-teeth-material-steel-sku-12022400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 23 teeth material steel SKU: 12022300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-23-teeth-material-steel-sku-12022300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 22 teeth material steel SKU: 12022200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-22-teeth-material-steel-sku-12022200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 21 teeth material steel SKU: 12022100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-21-teeth-material-steel-sku-12022100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 19 teeth material steel SKU: 12021900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-19-teeth-material-steel-sku-12021900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 18 teeth material steel SKU: 12021800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-18-teeth-material-steel-sku-12021800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 16 teeth material steel SKU: 12021600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-16-teeth-material-steel-sku-12021600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 15 teeth material steel SKU: 12021500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-15-teeth-material-steel-sku-12021500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 14 teeth material steel SKU: 12021400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-14-teeth-material-steel-sku-12021400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 13 teeth material steel SKU: 12021300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-13-teeth-material-steel-sku-12021300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 12 teeth material steel SKU: 12021200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-12-teeth-material-steel-sku-12021200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 05 B-2 pitch 8mm 11 teeth material steel SKU: 12021100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-05-b-2-pitch-8mm-11-teeth-material-steel-sku-12021100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 40 teeth material steel SKU: 12014000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-40-teeth-material-steel-sku-12014000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 39 teeth material steel SKU: 12013900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-39-teeth-material-steel-sku-12013900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 38 teeth material steel SKU: 12013800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-38-teeth-material-steel-sku-12013800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 37 teeth material steel SKU: 12013700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-37-teeth-material-steel-sku-12013700/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 36 teeth material steel SKU: 12013600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-36-teeth-material-steel-sku-12013600/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 35 teeth material steel SKU: 12013500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-35-teeth-material-steel-sku-12013500/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 34 teeth material steel SKU: 12013400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-34-teeth-material-steel-sku-12013400/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 33 teeth material steel SKU: 12013300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-33-teeth-material-steel-sku-12013300/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 32 teeth material steel SKU: 12013200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-32-teeth-material-steel-sku-12013200/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 31 teeth material steel SKU: 12013100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-31-teeth-material-steel-sku-12013100/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 30 teeth material steel SKU: 12013000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-30-teeth-material-steel-sku-12013000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 29 teeth material steel SKU: 12012900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-29-teeth-material-steel-sku-12012900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [drill bushing (guide bushing) similar DIN 172 - A 5,5 x 16 SKU: 622105516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-55-x-16-sku-622105516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,5 x 10 SKU: 622105510](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-55-x-10-sku-622105510/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,4 x 20 SKU: 622105420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-54-x-20-sku-622105420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,4 x 16 SKU: 622105416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-54-x-16-sku-622105416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,4 x 10 SKU: 622105410](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-54-x-10-sku-622105410/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,3 x 20 SKU: 622105320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-53-x-20-sku-622105320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,3 x 16 SKU: 622105316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-53-x-16-sku-622105316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,3 x 10 SKU: 622105310](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-53-x-10-sku-622105310/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,2 x 20 SKU: 622105220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-52-x-20-sku-622105220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,2 x 16 SKU: 622105216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-52-x-16-sku-622105216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,2 x 10 SKU: 622105210](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-52-x-10-sku-622105210/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5 x 16 SKU: 62210516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-5-x-16-sku-62210516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,1 x 20 SKU: 622105120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-51-x-20-sku-622105120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5 x 12 SKU: 62210512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-5-x-12-sku-62210512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,1 x 16 SKU: 622105116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-51-x-16-sku-622105116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,1 x 10 SKU: 622105110](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-51-x-10-sku-622105110/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5 x 8 SKU: 62210508](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-5-x-8-sku-62210508/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,9 x 16 SKU: 622104916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-49-x-16-sku-622104916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,9 x 12 SKU: 622104912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-49-x-12-sku-622104912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,9 x 8 SKU: 622104908](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-49-x-8-sku-622104908/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,8 x 16 SKU: 622104816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-48-x-16-sku-622104816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,8 x 12 SKU: 622104812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-48-x-12-sku-622104812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,8 x 8 SKU: 622104808](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-48-x-8-sku-622104808/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,7 x 16 SKU: 622104716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-47-x-16-sku-622104716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,7 x 12 SKU: 622104712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-47-x-12-sku-622104712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,7 x 8 SKU: 622104708](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-47-x-8-sku-622104708/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,6 x 16 SKU: 622104616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-46-x-16-sku-622104616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,6 x 12 SKU: 622104612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-46-x-12-sku-622104612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,6 x 8 SKU: 622104608](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-46-x-8-sku-622104608/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,5 x 16 SKU: 622104516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-45-x-16-sku-622104516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,5 x 12 SKU: 622104512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-45-x-12-sku-622104512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,5 x 8 SKU: 622104508](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-45-x-8-sku-622104508/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,4 x 16 SKU: 622104416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-44-x-16-sku-622104416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,4 x 12 SKU: 622104412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-44-x-12-sku-622104412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,4 x 8 SKU: 622104408](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-44-x-8-sku-622104408/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,3 x 16 SKU: 622104316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-43-x-16-sku-622104316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,3 x 12 SKU: 622104312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-43-x-12-sku-622104312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,3 x 8 SKU: 622104308](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-43-x-8-sku-622104308/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,2 x 16 SKU: 622104216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-42-x-16-sku-622104216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,2 x 12 SKU: 622104212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-42-x-12-sku-622104212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,2 x 8 SKU: 622104208](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-42-x-8-sku-622104208/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4 x 16 SKU: 62210416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-4-x-16-sku-62210416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4 x 12 SKU: 62210412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-4-x-12-sku-62210412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,1 x 16 SKU: 622104116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-41-x-16-sku-622104116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,1 x 12 SKU: 622104112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-41-x-12-sku-622104112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4,1 x 8 SKU: 622104108](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-41-x-8-sku-622104108/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 4 x 8 SKU: 62210408](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-4-x-8-sku-62210408/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,9 x 16 SKU: 622103916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-39-x-16-sku-622103916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,9 x 12 SKU: 622103912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-39-x-12-sku-622103912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,9 x 8 SKU: 622103908](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-39-x-8-sku-622103908/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,8 x 16 SKU: 622103816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-38-x-16-sku-622103816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,8 x 12 SKU: 622103812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-38-x-12-sku-622103812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,8 x 8 SKU: 622103808](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-38-x-8-sku-622103808/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,7 x 16 SKU: 622103716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-37-x-16-sku-622103716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,7 x 12 SKU: 622103712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-37-x-12-sku-622103712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,7 x 8 SKU: 622103708](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-37-x-8-sku-622103708/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,6 x 16 SKU: 622103616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-36-x-16-sku-622103616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,6 x 12 SKU: 622103612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-36-x-12-sku-622103612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,6 x 8 SKU: 622103608](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-36-x-8-sku-622103608/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,5 x 16 SKU: 622103516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-35-x-16-sku-622103516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,5 x 12 SKU: 622103512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-35-x-12-sku-622103512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,5 x 8 SKU: 622103508](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-35-x-8-sku-622103508/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,4 x 16 SKU: 622103416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-34-x-16-sku-622103416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,4 x 12 SKU: 622103412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-34-x-12-sku-622103412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,4 x 8 SKU: 622103408](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-34-x-8-sku-622103408/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,3 x 16 SKU: 622103316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-33-x-16-sku-622103316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,3 x 12 SKU: 622103312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-33-x-12-sku-622103312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,3 x 8 SKU: 622103308](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-33-x-8-sku-622103308/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,2 x 16 SKU: 622103216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-32-x-16-sku-622103216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,2 x 12 SKU: 622103212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-32-x-12-sku-622103212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,2 x 8 SKU: 622103208](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-32-x-8-sku-622103208/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3 x 16 SKU: 62210316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-3-x-16-sku-62210316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3 x 12 SKU: 62210312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-3-x-12-sku-62210312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,1 x 16 SKU: 622103116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-31-x-16-sku-622103116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,1 x 12 SKU: 622103112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-31-x-12-sku-622103112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3,1 x 8 SKU: 622103108](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-31-x-8-sku-622103108/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 3 x 8 SKU: 62210308](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-3-x-8-sku-62210308/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,9 x 16 SKU: 622102916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-29-x-16-sku-622102916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,9 x 12 SKU: 622102912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-29-x-12-sku-622102912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,9 x 8 SKU: 622102908](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-29-x-8-sku-622102908/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,8 x 16 SKU: 622102816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-28-x-16-sku-622102816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,8 x 12 SKU: 622102812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-28-x-12-sku-622102812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,8 x 8 SKU: 622102808](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-28-x-8-sku-622102808/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,7 x 16 SKU: 622102716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-27-x-16-sku-622102716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,7 x 12 SKU: 622102712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-27-x-12-sku-622102712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,7 x 8 SKU: 622102708](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-27-x-8-sku-622102708/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,6 x 9 SKU: 622102609](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-26-x-9-sku-622102609/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,6 x 6 SKU: 622102606](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-26-x-6-sku-622102606/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,5 x 9 SKU: 622102509](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-25-x-9-sku-622102509/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,5 x 6 SKU: 622102506](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-25-x-6-sku-622102506/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,4 x 9 SKU: 622102409](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-24-x-9-sku-622102409/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,4 x 6 SKU: 622102406](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-24-x-6-sku-622102406/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,3 x 9 SKU: 622102309](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-23-x-9-sku-622102309/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,3 x 6 SKU: 622102306](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-23-x-6-sku-622102306/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,2 x 9 SKU: 622102209](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-22-x-9-sku-622102209/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,2 x 6 SKU: 622102206](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-22-x-6-sku-622102206/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,1 x 9 SKU: 622102109](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-21-x-9-sku-622102109/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2,1 x 6 SKU: 622102106](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-21-x-6-sku-622102106/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2 x 9 SKU: 62210209](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-2-x-9-sku-62210209/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 2 x 6 SKU: 62210206](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-2-x-6-sku-62210206/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 9 teeth material steel teeth induction hardened SKU: 12188109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-9-teeth-material-steel-teeth-induction-hardened-sku-12188109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 8 teeth material steel teeth induction hardened SKU: 12188108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-8-teeth-material-steel-teeth-induction-hardened-sku-12188108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 06 B-2 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12183030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12183030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12183025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12183025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 30 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12183020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-30-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12183020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182516](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182516/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182316](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182316/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182315](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182315/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182116](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182116/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182115](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182115/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182016](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182016/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182015](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182015/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182012](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182012/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181920](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181920/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181916](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181916/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181915](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181915/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181912](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181912/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181820](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181820/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181815](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181815/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181812](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181812/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181720](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181720/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181715](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181715/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181712](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181712/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181620](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181620/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181615](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181615/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181612](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181612/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181516](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181516/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181515](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181515/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181514](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181514/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181419](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181419/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181416](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181416/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181415](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181415/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181414](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181414/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181315](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181315/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181314](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181314/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181312](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181312/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181310](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181310/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181216](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181216/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181215](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181215/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181214](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181214/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181212](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181212/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181210](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181210/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181115](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181115/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181114](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181114/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181112](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181112/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181110](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181110/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 06 B-1 25 teeth material steel for taper-bush 1108 SKU: 12177425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-for-taper-bush-1108-sku-12177425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 23 teeth material steel for taper-bush 1108 SKU: 12177423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-for-taper-bush-1108-sku-12177423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 21 teeth material steel for taper-bush 1108 SKU: 12177421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-for-taper-bush-1108-sku-12177421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 20 teeth material steel for taper-bush 1108 SKU: 12177420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-for-taper-bush-1108-sku-12177420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 19 teeth material steel for taper-bush 1008 SKU: 12177419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-for-taper-bush-1008-sku-12177419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 18 teeth material steel for taper-bush 1008 SKU: 12177418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-for-taper-bush-1008-sku-12177418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 114 teeth material cast iron for taper bush type 1615 SKU: 12177188G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-114-teeth-material-cast-iron-for-taper-bush-type-1615-sku-12177188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 95 teeth material cast iron for taper bush type 1610 SKU: 12177183G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-95-teeth-material-cast-iron-for-taper-bush-type-1610-sku-12177183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 76 teeth material cast iron for taper bush type 1610 SKU: 12177176G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-76-teeth-material-cast-iron-for-taper-bush-type-1610-sku-12177176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 57 teeth material cast iron for taper bush type 1610 SKU: 12177157G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-57-teeth-material-cast-iron-for-taper-bush-type-1610-sku-12177157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 45 teeth material steel for taper bush type 1610 SKU: 12177145](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-45-teeth-material-steel-for-taper-bush-type-1610-sku-12177145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 38 teeth material steel for taper bush type 1610 SKU: 12177138](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-38-teeth-material-steel-for-taper-bush-type-1610-sku-12177138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 30 teeth material steel for taper bush type 1210 SKU: 12177130](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-30-teeth-material-steel-for-taper-bush-type-1210-sku-12177130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 28 teeth material steel for taper bush type 1210 SKU: 12177128](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-28-teeth-material-steel-for-taper-bush-type-1210-sku-12177128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 27 teeth material steel for taper bush type 1210 SKU: 12177127](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-27-teeth-material-steel-for-taper-bush-type-1210-sku-12177127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 26 teeth material steel for taper bush type 1210 SKU: 12177126](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-26-teeth-material-steel-for-taper-bush-type-1210-sku-12177126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 25 teeth material steel for taper bush type 1210 SKU: 12177125](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-25-teeth-material-steel-for-taper-bush-type-1210-sku-12177125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 24 teeth material steel for taper bush type 1210 SKU: 12177124](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-24-teeth-material-steel-for-taper-bush-type-1210-sku-12177124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 23 teeth material steel for taper bush type 1210 SKU: 12177123](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-23-teeth-material-steel-for-taper-bush-type-1210-sku-12177123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 22 teeth material steel for taper bush type 1108 SKU: 12177122](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-22-teeth-material-steel-for-taper-bush-type-1108-sku-12177122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 21 teeth material steel for taper bush type 1008 SKU: 12177121](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-21-teeth-material-steel-for-taper-bush-type-1008-sku-12177121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 20 teeth material steel for taper bush type 1008 SKU: 12177120](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-20-teeth-material-steel-for-taper-bush-type-1008-sku-12177120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 19 teeth material steel for taper bush type 1008 SKU: 12177119](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-19-teeth-material-steel-for-taper-bush-type-1008-sku-12177119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 18 teeth material steel for taper bush type 1008 SKU: 12177118](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-18-teeth-material-steel-for-taper-bush-type-1008-sku-12177118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 17 teeth material steel for taper bush type 1008 SKU: 12177117](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-17-teeth-material-steel-for-taper-bush-type-1008-sku-12177117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 06 B-1 25 teeth material steel SKU: 12142500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-sku-12142500/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 23 teeth material steel SKU: 12142300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-sku-12142300/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 21 teeth material steel SKU: 12142100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-sku-12142100/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 20 teeth material steel SKU: 12142000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-sku-12142000/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 19 teeth material steel SKU: 12141900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-sku-12141900/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 18 teeth material steel SKU: 12141800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-sku-12141800/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 17 teeth material steel SKU: 12141700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-17-teeth-material-steel-sku-12141700/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 16 teeth material steel SKU: 12141600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-16-teeth-material-steel-sku-12141600/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 15 teeth material steel SKU: 12141500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-15-teeth-material-steel-sku-12141500/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 14 teeth material steel SKU: 12141400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-14-teeth-material-steel-sku-12141400/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [drill bushing (guide bushing) similar DIN 172 - A 8,8 x 25 SKU: 622108825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-88-x-25-sku-622108825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,8 x 20 SKU: 622108820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-88-x-20-sku-622108820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,8 x 12 SKU: 622108812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-88-x-12-sku-622108812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,7 x 25 SKU: 622108725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-87-x-25-sku-622108725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,7 x 20 SKU: 622108720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-87-x-20-sku-622108720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,7 x 12 SKU: 622108712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-87-x-12-sku-622108712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,6 x 25 SKU: 622108625](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-86-x-25-sku-622108625/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,6 x 20 SKU: 622108620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-86-x-20-sku-622108620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,6 x 12 SKU: 622108612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-86-x-12-sku-622108612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,5 x 25 SKU: 622108525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-85-x-25-sku-622108525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,5 x 20 SKU: 622108520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-85-x-20-sku-622108520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,5 x 12 SKU: 622108512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-85-x-12-sku-622108512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,4 x 25 SKU: 622108425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-84-x-25-sku-622108425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,4 x 20 SKU: 622108420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-84-x-20-sku-622108420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,4 x 12 SKU: 622108412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-84-x-12-sku-622108412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,3 x 25 SKU: 622108325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-83-x-25-sku-622108325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,3 x 20 SKU: 622108320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-83-x-20-sku-622108320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,3 x 12 SKU: 622108312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-83-x-12-sku-622108312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,2 x 25 SKU: 622108225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-82-x-25-sku-622108225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,2 x 20 SKU: 622108220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-82-x-20-sku-622108220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,2 x 12 SKU: 622108212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-82-x-12-sku-622108212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8 x 20 SKU: 62210820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-8-x-20-sku-62210820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8 x 16 SKU: 62210816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-8-x-16-sku-62210816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,1 x 25 SKU: 622108125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-81-x-25-sku-622108125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,1 x 20 SKU: 622108120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-81-x-20-sku-622108120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,1 x 12 SKU: 622108112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-81-x-12-sku-622108112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8 x 10 SKU: 62210810](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-8-x-10-sku-62210810/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,9 x 20 SKU: 622107920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-79-x-20-sku-622107920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,9 x 16 SKU: 622107916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-79-x-16-sku-622107916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,9 x 10 SKU: 622107910](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-79-x-10-sku-622107910/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,8 x 20 SKU: 622107820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-78-x-20-sku-622107820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,8 x 16 SKU: 622107816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-78-x-16-sku-622107816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,8 x 10 SKU: 622107810](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-78-x-10-sku-622107810/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,7 x 20 SKU: 622107720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-77-x-20-sku-622107720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,7 x 16 SKU: 622107716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-77-x-16-sku-622107716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,7 x 10 SKU: 622107710](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-77-x-10-sku-622107710/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,6 x 20 SKU: 622107620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-76-x-20-sku-622107620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,6 x 16 SKU: 622107616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-76-x-16-sku-622107616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,6 x 10 SKU: 622107610](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-76-x-10-sku-622107610/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,5 x 20 SKU: 622107520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-75-x-20-sku-622107520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,5 x 16 SKU: 622107516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-75-x-16-sku-622107516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,5 x 10 SKU: 622107510](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-75-x-10-sku-622107510/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,4 x 20 SKU: 622107420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-74-x-20-sku-622107420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,4 x 16 SKU: 622107416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-74-x-16-sku-622107416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,4 x 10 SKU: 622107410](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-74-x-10-sku-622107410/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,3 x 20 SKU: 622107320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-73-x-20-sku-622107320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,3 x 16 SKU: 622107316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-73-x-16-sku-622107316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,3 x 10 SKU: 622107310](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-73-x-10-sku-622107310/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,2 x 20 SKU: 622107220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-72-x-20-sku-622107220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,2 x 16 SKU: 622107216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-72-x-16-sku-622107216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,2 x 10 SKU: 622107210](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-72-x-10-sku-622107210/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7 x 20 SKU: 62210720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-7-x-20-sku-62210720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7 x 16 SKU: 62210716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-7-x-16-sku-62210716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,1 x 20 SKU: 622107120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-71-x-20-sku-622107120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,1 x 16 SKU: 622107116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-71-x-16-sku-622107116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7,1 x 10 SKU: 622107110](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-71-x-10-sku-622107110/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 7 x 10 SKU: 62210710](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-7-x-10-sku-62210710/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,9 x 20 SKU: 622106920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-69-x-20-sku-622106920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,9 x 16 SKU: 622106916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-69-x-16-sku-622106916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,9 x 10 SKU: 622106910](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-69-x-10-sku-622106910/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,8 x 20 SKU: 622106820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-68-x-20-sku-622106820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,8 x 16 SKU: 622106816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-68-x-16-sku-622106816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,8 x 10 SKU: 622106810](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-68-x-10-sku-622106810/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,7 x 20 SKU: 622106720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-67-x-20-sku-622106720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,7 x 16 SKU: 622106716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-67-x-16-sku-622106716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,7 x 10 SKU: 622106710](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-67-x-10-sku-622106710/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,6 x 20 SKU: 622106620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-66-x-20-sku-622106620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,6 x 16 SKU: 622106616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-66-x-16-sku-622106616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,6 x 10 SKU: 622106610](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-66-x-10-sku-622106610/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,5 x 20 SKU: 622106520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-65-x-20-sku-622106520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,5 x 16 SKU: 622106516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-65-x-16-sku-622106516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,5 x 10 SKU: 622106510](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-65-x-10-sku-622106510/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,4 x 20 SKU: 622106420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-64-x-20-sku-622106420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,4 x 16 SKU: 622106416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-64-x-16-sku-622106416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,4 x 10 SKU: 622106410](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-64-x-10-sku-622106410/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,3 x 20 SKU: 622106320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-63-x-20-sku-622106320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,3 x 16 SKU: 622106316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-63-x-16-sku-622106316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,3 x 10 SKU: 622106310](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-63-x-10-sku-622106310/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,2 x 20 SKU: 622106220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-62-x-20-sku-622106220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,2 x 16 SKU: 622106216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-62-x-16-sku-622106216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,2 x 10 SKU: 622106210](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-62-x-10-sku-622106210/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6 x 20 SKU: 62210620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-6-x-20-sku-62210620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6 x 16 SKU: 62210616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-6-x-16-sku-62210616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,1 x 20 SKU: 622106120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-61-x-20-sku-622106120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,1 x 16 SKU: 622106116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-61-x-16-sku-622106116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6,1 x 10 SKU: 622106110](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-61-x-10-sku-622106110/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 6 x 10 SKU: 62210610](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-6-x-10-sku-62210610/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,9 x 20 SKU: 622105920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-59-x-20-sku-622105920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,9 x 16 SKU: 622105916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-59-x-16-sku-622105916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,9 x 10 SKU: 622105910](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-59-x-10-sku-622105910/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,8 x 20 SKU: 622105820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-58-x-20-sku-622105820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,8 x 16 SKU: 622105816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-58-x-16-sku-622105816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,8 x 10 SKU: 622105810](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-58-x-10-sku-622105810/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,7 x 20 SKU: 622105720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-57-x-20-sku-622105720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,7 x 16 SKU: 622105716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-57-x-16-sku-622105716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,7 x 10 SKU: 622105710](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-57-x-10-sku-622105710/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,6 x 20 SKU: 622105620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-56-x-20-sku-622105620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,6 x 16 SKU: 622105616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-56-x-16-sku-622105616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,6 x 10 SKU: 622105610](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-56-x-10-sku-622105610/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 5,5 x 20 SKU: 622105520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-55-x-20-sku-622105520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 25 teeth material steel SKU: 12522500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-25-teeth-material-steel-sku-12522500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 24 teeth material steel SKU: 12522400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-24-teeth-material-steel-sku-12522400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 23 teeth material steel SKU: 12522300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-23-teeth-material-steel-sku-12522300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 22 teeth material steel SKU: 12522200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-22-teeth-material-steel-sku-12522200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 21 teeth material steel SKU: 12522100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-21-teeth-material-steel-sku-12522100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 20 teeth material steel SKU: 12522000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-20-teeth-material-steel-sku-12522000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 19 teeth material steel SKU: 12521900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-19-teeth-material-steel-sku-12521900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 18 teeth material steel SKU: 12521800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-18-teeth-material-steel-sku-12521800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 17 teeth material steel SKU: 12521700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-17-teeth-material-steel-sku-12521700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 16 teeth material steel SKU: 12521600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-16-teeth-material-steel-sku-12521600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 15 teeth material steel SKU: 12521500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-15-teeth-material-steel-sku-12521500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 14 teeth material steel SKU: 12521400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-14-teeth-material-steel-sku-12521400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 13 teeth material steel SKU: 12521300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-13-teeth-material-steel-sku-12521300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 12 teeth material steel SKU: 12521200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-12-teeth-material-steel-sku-12521200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 11 teeth material steel SKU: 12521100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-11-teeth-material-steel-sku-12521100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 114 teeth material cast iron SKU: 12518800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-114-teeth-material-cast-iron-sku-12518800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 95 teeth material cast iron SKU: 12518300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-95-teeth-material-cast-iron-sku-12518300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 76 teeth material cast iron SKU: 12517600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-76-teeth-material-cast-iron-sku-12517600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 57 teeth material cast iron SKU: 12515700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-57-teeth-material-cast-iron-sku-12515700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 45 teeth material cast iron SKU: 12514500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-45-teeth-material-cast-iron-sku-12514500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 40 teeth material steel SKU: 12514000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-40-teeth-material-steel-sku-12514000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 38 teeth material steel SKU: 12513800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-38-teeth-material-steel-sku-12513800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 37 teeth material steel SKU: 12513700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-37-teeth-material-steel-sku-12513700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 36 teeth material steel SKU: 12513600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-36-teeth-material-steel-sku-12513600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 35 teeth material steel SKU: 12513500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-35-teeth-material-steel-sku-12513500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 32 teeth material steel SKU: 12513200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-32-teeth-material-steel-sku-12513200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 30 teeth material steel SKU: 12513000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-30-teeth-material-steel-sku-12513000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 28 teeth material steel SKU: 12512800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-28-teeth-material-steel-sku-12512800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 27 teeth material steel SKU: 12512700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-27-teeth-material-steel-sku-12512700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 26 teeth material steel SKU: 12512600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-26-teeth-material-steel-sku-12512600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 25 teeth material steel SKU: 12512500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-25-teeth-material-steel-sku-12512500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 24 teeth material steel SKU: 12512400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-24-teeth-material-steel-sku-12512400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 23 teeth material steel SKU: 12512300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-23-teeth-material-steel-sku-12512300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 22 teeth material steel SKU: 12512200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-22-teeth-material-steel-sku-12512200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 21 teeth material steel SKU: 12512100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-21-teeth-material-steel-sku-12512100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 20 teeth material steel SKU: 12512000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-20-teeth-material-steel-sku-12512000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 19 teeth material steel SKU: 12511900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-19-teeth-material-steel-sku-12511900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 18 teeth material steel SKU: 12511800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-18-teeth-material-steel-sku-12511800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 17 teeth material steel SKU: 12511700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-17-teeth-material-steel-sku-12511700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 16 teeth material steel SKU: 12511600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-16-teeth-material-steel-sku-12511600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 15 teeth material steel SKU: 12511500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-15-teeth-material-steel-sku-12511500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 14 teeth material steel SKU: 12511400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-14-teeth-material-steel-sku-12511400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 13 teeth material steel SKU: 12511300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-13-teeth-material-steel-sku-12511300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 12 teeth material steel SKU: 12511200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-12-teeth-material-steel-sku-12511200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 11 teeth material steel SKU: 12511100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-11-teeth-material-steel-sku-12511100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 10 teeth material steel SKU: 12511000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-10-teeth-material-steel-sku-12511000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 9 teeth material steel SKU: 12510900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-9-teeth-material-steel-sku-12510900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 8 teeth material steel SKU: 12510800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-8-teeth-material-steel-sku-12510800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 25 teeth material steel teeth hardened SKU: 12188525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-teeth-hardened-sku-12188525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 23 teeth material steel teeth hardened SKU: 12188523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-teeth-hardened-sku-12188523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 21 teeth material steel teeth hardened SKU: 12188521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-teeth-hardened-sku-12188521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 20 teeth material steel teeth hardened SKU: 12188520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-teeth-hardened-sku-12188520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 19 teeth material steel teeth hardened SKU: 12188519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-teeth-hardened-sku-12188519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 18 teeth material steel teeth hardened SKU: 12188518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-teeth-hardened-sku-12188518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 17 teeth material steel teeth hardened SKU: 12188517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-17-teeth-material-steel-teeth-hardened-sku-12188517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 16 teeth material steel teeth hardened SKU: 12188516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-16-teeth-material-steel-teeth-hardened-sku-12188516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 15 teeth material steel teeth hardened SKU: 12188515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-15-teeth-material-steel-teeth-hardened-sku-12188515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 14 teeth material steel teeth hardened SKU: 12188514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-14-teeth-material-steel-teeth-hardened-sku-12188514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 13 teeth material steel teeth hardened SKU: 12188513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-13-teeth-material-steel-teeth-hardened-sku-12188513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 25 teeth material steel teeth hardened SKU: 12188425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-teeth-hardened-sku-12188425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 23 teeth material steel teeth hardened SKU: 12188423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-teeth-hardened-sku-12188423/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 21 teeth material steel teeth hardened SKU: 12188421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-teeth-hardened-sku-12188421/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 20 teeth material steel teeth hardened SKU: 12188420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-teeth-hardened-sku-12188420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 19 teeth material steel teeth hardened SKU: 12188419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-teeth-hardened-sku-12188419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 18 teeth material steel teeth hardened SKU: 12188418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-teeth-hardened-sku-12188418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 17 teeth material steel teeth hardened SKU: 12188417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-17-teeth-material-steel-teeth-hardened-sku-12188417/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 16 teeth material steel teeth hardened SKU: 12188416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-16-teeth-material-steel-teeth-hardened-sku-12188416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 15 teeth material steel teeth hardened SKU: 12188415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-15-teeth-material-steel-teeth-hardened-sku-12188415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 14 teeth material steel teeth hardened SKU: 12188414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-14-teeth-material-steel-teeth-hardened-sku-12188414/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 13 teeth material steel teeth hardened SKU: 12188413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-13-teeth-material-steel-teeth-hardened-sku-12188413/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 40 teeth material steel teeth induction hardened SKU: 12188140](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-40-teeth-material-steel-teeth-induction-hardened-sku-12188140/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 38 teeth material steel teeth induction hardened SKU: 12188138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-38-teeth-material-steel-teeth-induction-hardened-sku-12188138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 35 teeth material steel teeth induction hardened SKU: 12188135](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-35-teeth-material-steel-teeth-induction-hardened-sku-12188135/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 32 teeth material steel teeth induction hardened SKU: 12188132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-32-teeth-material-steel-teeth-induction-hardened-sku-12188132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 30 teeth material steel teeth induction hardened SKU: 12188130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-30-teeth-material-steel-teeth-induction-hardened-sku-12188130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 28 teeth material steel teeth induction hardened SKU: 12188128](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-28-teeth-material-steel-teeth-induction-hardened-sku-12188128/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 27 teeth material steel teeth induction hardened SKU: 12188127](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-27-teeth-material-steel-teeth-induction-hardened-sku-12188127/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 26 teeth material steel teeth induction hardened SKU: 12188126](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-26-teeth-material-steel-teeth-induction-hardened-sku-12188126/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 25 teeth material steel teeth induction hardened SKU: 12188125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-25-teeth-material-steel-teeth-induction-hardened-sku-12188125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 24 teeth material steel teeth induction hardened SKU: 12188124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-24-teeth-material-steel-teeth-induction-hardened-sku-12188124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 23 teeth material steel teeth induction hardened SKU: 12188123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-23-teeth-material-steel-teeth-induction-hardened-sku-12188123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 22 teeth material steel teeth induction hardened SKU: 12188122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-22-teeth-material-steel-teeth-induction-hardened-sku-12188122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 21 teeth material steel teeth induction hardened SKU: 12188121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-21-teeth-material-steel-teeth-induction-hardened-sku-12188121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 20 teeth material steel teeth induction hardened SKU: 12188120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-20-teeth-material-steel-teeth-induction-hardened-sku-12188120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 19 teeth material steel teeth induction hardened SKU: 12188119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-19-teeth-material-steel-teeth-induction-hardened-sku-12188119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 18 teeth material steel teeth induction hardened SKU: 12188118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-18-teeth-material-steel-teeth-induction-hardened-sku-12188118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 17 teeth material steel teeth induction hardened SKU: 12188117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-17-teeth-material-steel-teeth-induction-hardened-sku-12188117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 16 teeth material steel teeth induction hardened SKU: 12188116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-16-teeth-material-steel-teeth-induction-hardened-sku-12188116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 15 teeth material steel teeth induction hardened SKU: 12188115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-15-teeth-material-steel-teeth-induction-hardened-sku-12188115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 14 teeth material steel teeth induction hardened SKU: 12188114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-14-teeth-material-steel-teeth-induction-hardened-sku-12188114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 13 teeth material steel teeth induction hardened SKU: 12188113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-13-teeth-material-steel-teeth-induction-hardened-sku-12188113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 12 teeth material steel teeth induction hardened SKU: 12188112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-12-teeth-material-steel-teeth-induction-hardened-sku-12188112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 11 teeth material steel teeth induction hardened SKU: 12188111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-11-teeth-material-steel-teeth-induction-hardened-sku-12188111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 10 teeth material steel teeth induction hardened SKU: 12188110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-10-teeth-material-steel-teeth-induction-hardened-sku-12188110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [drill bushing (guide bushing) similar DIN 172 - A 12,2 x 28 SKU: 622112228](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-122-x-28-sku-622112228/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,2 x 16 SKU: 622112216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-122-x-16-sku-622112216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12 x 20 SKU: 62211220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-12-x-20-sku-62211220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,1 x 36 SKU: 622112136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-121-x-36-sku-622112136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,1 x 28 SKU: 622112128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-121-x-28-sku-622112128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12 x 12 SKU: 62211212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-12-x-12-sku-62211212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,1 x 16 SKU: 622112116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-121-x-16-sku-622112116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,9 x 25 SKU: 622111925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-119-x-25-sku-622111925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,9 x 20 SKU: 622111920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-119-x-20-sku-622111920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,9 x 12 SKU: 622111912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-119-x-12-sku-622111912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,8 x 25 SKU: 622111825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-118-x-25-sku-622111825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,8 x 20 SKU: 622111820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-118-x-20-sku-622111820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,8 x 12 SKU: 622111812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-118-x-12-sku-622111812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,7 x 25 SKU: 622111725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-117-x-25-sku-622111725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,7 x 20 SKU: 622111720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-117-x-20-sku-622111720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,7 x 12 SKU: 622111712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-117-x-12-sku-622111712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,6 x 25 SKU: 622111625](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-116-x-25-sku-622111625/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,6 x 20 SKU: 622111620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-116-x-20-sku-622111620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,6 x 12 SKU: 622111612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-116-x-12-sku-622111612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,5 x 25 SKU: 622111525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-115-x-25-sku-622111525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,5 x 20 SKU: 622111520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-115-x-20-sku-622111520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,5 x 12 SKU: 622111512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-115-x-12-sku-622111512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,4 x 25 SKU: 622111425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-114-x-25-sku-622111425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,4 x 20 SKU: 622111420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-114-x-20-sku-622111420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,4 x 12 SKU: 622111412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-114-x-12-sku-622111412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,3 x 25 SKU: 622111325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-113-x-25-sku-622111325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,3 x 20 SKU: 622111320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-113-x-20-sku-622111320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,3 x 12 SKU: 622111312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-113-x-12-sku-622111312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11 x 25 SKU: 62211125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-11-x-25-sku-62211125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,2 x 25 SKU: 622111225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-112-x-25-sku-622111225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,2 x 20 SKU: 622111220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-112-x-20-sku-622111220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,2 x 12 SKU: 622111212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-112-x-12-sku-622111212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11 x 20 SKU: 62211120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-11-x-20-sku-62211120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,1 x 25 SKU: 622111125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-111-x-25-sku-622111125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,1 x 20 SKU: 622111120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-111-x-20-sku-622111120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11 x 12 SKU: 62211112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-11-x-12-sku-62211112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 11,1 x 12 SKU: 622111112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-111-x-12-sku-622111112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,9 x 25 SKU: 622110925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-109-x-25-sku-622110925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,9 x 20 SKU: 622110920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-109-x-20-sku-622110920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,9 x 12 SKU: 622110912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-109-x-12-sku-622110912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,8 x 25 SKU: 622110825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-108-x-25-sku-622110825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,8 x 20 SKU: 622110820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-108-x-20-sku-622110820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,8 x 12 SKU: 622110812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-108-x-12-sku-622110812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,7 x 25 SKU: 622110725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-107-x-25-sku-622110725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,7 x 20 SKU: 622110720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-107-x-20-sku-622110720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,7 x 12 SKU: 622110712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-107-x-12-sku-622110712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,6 x 25 SKU: 622110625](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-106-x-25-sku-622110625/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,6 x 20 SKU: 622110620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-106-x-20-sku-622110620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,6 x 12 SKU: 622110612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-106-x-12-sku-622110612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,5 x 25 SKU: 622110525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-105-x-25-sku-622110525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,5 x 20 SKU: 622110520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-105-x-20-sku-622110520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,5 x 12 SKU: 622110512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-105-x-12-sku-622110512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,4 x 25 SKU: 622110425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-104-x-25-sku-622110425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,4 x 20 SKU: 622110420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-104-x-20-sku-622110420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,4 x 12 SKU: 622110412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-104-x-12-sku-622110412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,3 x 25 SKU: 622110325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-103-x-25-sku-622110325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,3 x 20 SKU: 622110320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-103-x-20-sku-622110320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,3 x 12 SKU: 622110312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-103-x-12-sku-622110312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10 x 25 SKU: 62211025](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-10-x-25-sku-62211025/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,2 x 25 SKU: 622110225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-102-x-25-sku-622110225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,2 x 20 SKU: 622110220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-102-x-20-sku-622110220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,2 x 12 SKU: 622110212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-102-x-12-sku-622110212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10 x 20 SKU: 62211020](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-10-x-20-sku-62211020/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,1 x 25 SKU: 622110125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-101-x-25-sku-622110125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,1 x 20 SKU: 622110120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-101-x-20-sku-622110120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10 x 12 SKU: 62211012](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-10-x-12-sku-62211012/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 10,1 x 12 SKU: 622110112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-101-x-12-sku-622110112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,9 x 25 SKU: 622109925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-99-x-25-sku-622109925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,9 x 20 SKU: 622109920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-99-x-20-sku-622109920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,9 x 12 SKU: 622109912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-99-x-12-sku-622109912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,8 x 25 SKU: 622109825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-98-x-25-sku-622109825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,8 x 20 SKU: 622109820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-98-x-20-sku-622109820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,8 x 12 SKU: 622109812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-98-x-12-sku-622109812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,7 x 25 SKU: 622109725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-97-x-25-sku-622109725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,7 x 20 SKU: 622109720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-97-x-20-sku-622109720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,7 x 12 SKU: 622109712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-97-x-12-sku-622109712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,6 x 25 SKU: 622109625](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-96-x-25-sku-622109625/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,6 x 20 SKU: 622109620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-96-x-20-sku-622109620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,6 x 12 SKU: 622109612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-96-x-12-sku-622109612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,5 x 25 SKU: 622109525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-95-x-25-sku-622109525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,5 x 20 SKU: 622109520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-95-x-20-sku-622109520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,5 x 12 SKU: 622109512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-95-x-12-sku-622109512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,4 x 25 SKU: 622109425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-94-x-25-sku-622109425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,4 x 20 SKU: 622109420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-94-x-20-sku-622109420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,4 x 12 SKU: 622109412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-94-x-12-sku-622109412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,3 x 25 SKU: 622109325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-93-x-25-sku-622109325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,3 x 20 SKU: 622109320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-93-x-20-sku-622109320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,3 x 12 SKU: 622109312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-93-x-12-sku-622109312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9 x 25 SKU: 62210925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-9-x-25-sku-62210925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,2 x 25 SKU: 622109225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-92-x-25-sku-622109225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,2 x 20 SKU: 622109220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-92-x-20-sku-622109220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,2 x 12 SKU: 622109212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-92-x-12-sku-622109212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9 x 20 SKU: 62210920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-9-x-20-sku-62210920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,1 x 25 SKU: 622109125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-91-x-25-sku-622109125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,1 x 20 SKU: 622109120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-91-x-20-sku-622109120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9 x 12 SKU: 62210912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-9-x-12-sku-62210912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 9,1 x 12 SKU: 622109112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-91-x-12-sku-622109112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,9 x 25 SKU: 622108925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-89-x-25-sku-622108925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,9 x 20 SKU: 622108920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-89-x-20-sku-622108920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 8,9 x 12 SKU: 622108912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-89-x-12-sku-622108912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581935](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581935/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581930](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581930/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581920](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581920/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581835](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581835/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581830](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581830/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581820](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581820/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581730](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581730/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581720](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581720/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581718](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581718/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581716](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581716/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581620](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581620/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581618](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581618/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581616](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581616/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581516](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581516/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581515](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581515/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581416](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581416/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581415](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581415/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581316](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581316/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581315](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581315/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581314](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581314/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581216](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581216/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581215](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581215/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581214](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581214/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581212](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581212/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581116](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581116/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581115](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581115/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581114](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581114/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581112](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581112/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 08 B-1 25 teeth material steel for taper-bush 2012 SKU: 12577425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-for-taper-bush-2012-sku-12577425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 23 teeth material steel for taper-bush 1610 SKU: 12577423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-for-taper-bush-1610-sku-12577423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 21 teeth material steel for taper-bush 1610 SKU: 12577421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-for-taper-bush-1610-sku-12577421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 20 teeth material steel for taper-bush 1210 SKU: 12577420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-for-taper-bush-1210-sku-12577420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 19 teeth material steel for taper-bush 1210 SKU: 12577419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-for-taper-bush-1210-sku-12577419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 18 teeth material steel for taper-bush 1210 SKU: 12577418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-for-taper-bush-1210-sku-12577418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 17 teeth material steel for taper-bush 1108 SKU: 12577417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-for-taper-bush-1108-sku-12577417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 16 teeth material steel for taper-bush 1108 SKU: 12577416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-for-taper-bush-1108-sku-12577416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 15 teeth material steel for taper-bush 1008 SKU: 12577415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-for-taper-bush-1008-sku-12577415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 114 teeth material cast iron for taper bush type 2517 SKU: 12577188G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-114-teeth-material-cast-iron-for-taper-bush-type-2517-sku-12577188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 114 teeth material steel for taper bush type 2517 SKU: 12577188](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-114-teeth-material-steel-for-taper-bush-type-2517-sku-12577188/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 95 teeth material cast iron for taper bush type 2012 SKU: 12577183G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-95-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 76 teeth material cast iron for taper bush type 2012 SKU: 12577176G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-76-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 57 teeth material cast iron for taper bush type 2012 SKU: 12577157G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-57-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 45 teeth material cast iron for taper bush type 2012 SKU: 12577145G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-45-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 45 teeth material steel for taper bush type 2012 SKU: 12577145](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-45-teeth-material-steel-for-taper-bush-type-2012-sku-12577145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 38 teeth material steel for taper bush type 2012 SKU: 12577138](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-38-teeth-material-steel-for-taper-bush-type-2012-sku-12577138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 30 teeth material steel for taper bush type 2012 SKU: 12577130](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-30-teeth-material-steel-for-taper-bush-type-2012-sku-12577130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 28 teeth material steel for taper bush type 2012 SKU: 12577128](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-28-teeth-material-steel-for-taper-bush-type-2012-sku-12577128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 27 teeth material steel for taper bush type 2012 SKU: 12577127](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-27-teeth-material-steel-for-taper-bush-type-2012-sku-12577127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 26 teeth material steel for taper bush type 2012 SKU: 12577126](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-26-teeth-material-steel-for-taper-bush-type-2012-sku-12577126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 25 teeth material steel for taper bush type 2012 SKU: 12577125](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-25-teeth-material-steel-for-taper-bush-type-2012-sku-12577125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 24 teeth material steel for taper bush type 2012 SKU: 12577124](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-24-teeth-material-steel-for-taper-bush-type-2012-sku-12577124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 23 teeth material steel for taper bush type 1610 SKU: 12577123](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-23-teeth-material-steel-for-taper-bush-type-1610-sku-12577123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 22 teeth material steel for taper bush type 1610 SKU: 12577122](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-22-teeth-material-steel-for-taper-bush-type-1610-sku-12577122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 21 teeth material steel for taper bush type 1610 SKU: 12577121](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-21-teeth-material-steel-for-taper-bush-type-1610-sku-12577121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 20 teeth material steel for taper bush type 1610 SKU: 12577120](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-20-teeth-material-steel-for-taper-bush-type-1610-sku-12577120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 19 teeth material steel for taper bush type 1210 SKU: 12577119](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-19-teeth-material-steel-for-taper-bush-type-1210-sku-12577119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 18 teeth material steel for taper bush type 1210 SKU: 12577118](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-18-teeth-material-steel-for-taper-bush-type-1210-sku-12577118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 17 teeth material steel for taper bush type 1210 SKU: 12577117](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-17-teeth-material-steel-for-taper-bush-type-1210-sku-12577117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 16 teeth material steel for taper bush type 1108 SKU: 12577116](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-16-teeth-material-steel-for-taper-bush-type-1108-sku-12577116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 15 teeth material steel for taper bush type 1008 SKU: 12577115](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-15-teeth-material-steel-for-taper-bush-type-1008-sku-12577115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 08 B-1 25 teeth material steel SKU: 12542500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-sku-12542500/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 23 teeth material steel SKU: 12542300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-sku-12542300/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 21 teeth material steel SKU: 12542100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-sku-12542100/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 20 teeth material steel SKU: 12542000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-sku-12542000/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 19 teeth material steel SKU: 12541900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-sku-12541900/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 18 teeth material steel SKU: 12541800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-sku-12541800/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 17 teeth material steel SKU: 12541700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-sku-12541700/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 16 teeth material steel SKU: 12541600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-sku-12541600/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 15 teeth material steel SKU: 12541500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-sku-12541500/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 14 teeth material steel SKU: 12541400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-14-teeth-material-steel-sku-12541400/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 13 teeth material steel SKU: 12541300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-13-teeth-material-steel-sku-12541300/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 12 teeth material steel SKU: 12541200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-12-teeth-material-steel-sku-12541200/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 114 teeth material steel SKU: 12528800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-114-teeth-material-steel-sku-12528800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 95 teeth material steel SKU: 12528300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-95-teeth-material-steel-sku-12528300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 76 teeth material steel SKU: 12527600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-76-teeth-material-steel-sku-12527600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 57 teeth material steel SKU: 12525700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-57-teeth-material-steel-sku-12525700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 54 teeth material steel SKU: 12525400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-54-teeth-material-steel-sku-12525400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 48 teeth material steel SKU: 12524800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-48-teeth-material-steel-sku-12524800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 45 teeth material steel SKU: 12524500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-45-teeth-material-steel-sku-12524500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 40 teeth material steel SKU: 12524000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-40-teeth-material-steel-sku-12524000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 38 teeth material steel SKU: 12523800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-38-teeth-material-steel-sku-12523800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 36 teeth material steel SKU: 12523600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-36-teeth-material-steel-sku-12523600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 35 teeth material steel SKU: 12523500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-35-teeth-material-steel-sku-12523500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 32 teeth material steel SKU: 12523200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-32-teeth-material-steel-sku-12523200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 30 teeth material steel SKU: 12523000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-30-teeth-material-steel-sku-12523000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 28 teeth material steel SKU: 12522800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-28-teeth-material-steel-sku-12522800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 27 teeth material steel SKU: 12522700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-27-teeth-material-steel-sku-12522700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 26 teeth material steel SKU: 12522600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-26-teeth-material-steel-sku-12522600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [drill bushing (guide bushing) similar DIN 172 - A 16,5 x 28 SKU: 622116528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-165-x-28-sku-622116528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 16,5 x 16 SKU: 622116516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-165-x-16-sku-622116516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 16 x 36 SKU: 62211636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-16-x-36-sku-62211636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 16 x 28 SKU: 62211628](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-16-x-28-sku-62211628/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 16 x 16 SKU: 62211616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-16-x-16-sku-62211616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 16,1 x 36 SKU: 622116136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-161-x-36-sku-622116136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 16,1 x 28 SKU: 622116128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-161-x-28-sku-622116128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 16,1 x 16 SKU: 622116116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-161-x-16-sku-622116116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 15,5 x 36 SKU: 622115536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-155-x-36-sku-622115536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 15,5 x 28 SKU: 622115528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-155-x-28-sku-622115528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 15,5 x 16 SKU: 622115516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-155-x-16-sku-622115516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 15 x 36 SKU: 62211536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-15-x-36-sku-62211536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 15 x 28 SKU: 62211528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-15-x-28-sku-62211528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 15 x 16 SKU: 62211516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-15-x-16-sku-62211516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 15,1 x 36 SKU: 622115136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-151-x-36-sku-622115136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 15,1 x 28 SKU: 622115128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-151-x-28-sku-622115128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 15,1 x 16 SKU: 622115116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-151-x-16-sku-622115116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,9 x 36 SKU: 622114936](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-149-x-36-sku-622114936/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,9 x 28 SKU: 622114928](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-149-x-28-sku-622114928/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,9 x 16 SKU: 622114916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-149-x-16-sku-622114916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,8 x 36 SKU: 622114836](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-148-x-36-sku-622114836/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,8 x 28 SKU: 622114828](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-148-x-28-sku-622114828/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,8 x 16 SKU: 622114816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-148-x-16-sku-622114816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,7 x 36 SKU: 622114736](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-147-x-36-sku-622114736/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,7 x 28 SKU: 622114728](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-147-x-28-sku-622114728/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,7 x 16 SKU: 622114716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-147-x-16-sku-622114716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,6 x 36 SKU: 622114636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-146-x-36-sku-622114636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,6 x 28 SKU: 622114628](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-146-x-28-sku-622114628/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,6 x 16 SKU: 622114616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-146-x-16-sku-622114616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,5 x 36 SKU: 622114536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-145-x-36-sku-622114536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,5 x 28 SKU: 622114528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-145-x-28-sku-622114528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,5 x 16 SKU: 622114516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-145-x-16-sku-622114516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,4 x 36 SKU: 622114436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-144-x-36-sku-622114436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,4 x 28 SKU: 622114428](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-144-x-28-sku-622114428/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,4 x 16 SKU: 622114416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-144-x-16-sku-622114416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14 x 36 SKU: 62211436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-14-x-36-sku-62211436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,3 x 36 SKU: 622114336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-143-x-36-sku-622114336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,3 x 28 SKU: 622114328](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-143-x-28-sku-622114328/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,3 x 16 SKU: 622114316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-143-x-16-sku-622114316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14 x 28 SKU: 62211428](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-14-x-28-sku-62211428/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,2 x 36 SKU: 622114236](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-142-x-36-sku-622114236/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,2 x 28 SKU: 622114228](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-142-x-28-sku-622114228/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,2 x 16 SKU: 622114216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-142-x-16-sku-622114216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14 x 16 SKU: 62211416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-14-x-16-sku-62211416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,1 x 36 SKU: 622114136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-141-x-36-sku-622114136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,1 x 28 SKU: 622114128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-141-x-28-sku-622114128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 14,1 x 16 SKU: 622114116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-141-x-16-sku-622114116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,9 x 36 SKU: 622113936](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-139-x-36-sku-622113936/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,9 x 28 SKU: 622113928](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-139-x-28-sku-622113928/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,9 x 16 SKU: 622113916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-139-x-16-sku-622113916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,8 x 36 SKU: 622113836](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-138-x-36-sku-622113836/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,8 x 28 SKU: 622113828](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-138-x-28-sku-622113828/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,8 x 16 SKU: 622113816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-138-x-16-sku-622113816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,7 x 36 SKU: 622113736](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-137-x-36-sku-622113736/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,7 x 28 SKU: 622113728](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-137-x-28-sku-622113728/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,7 x 16 SKU: 622113716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-137-x-16-sku-622113716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,6 x 36 SKU: 622113636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-136-x-36-sku-622113636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,6 x 28 SKU: 622113628](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-136-x-28-sku-622113628/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,6 x 16 SKU: 622113616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-136-x-16-sku-622113616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,5 x 36 SKU: 622113536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-135-x-36-sku-622113536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,5 x 28 SKU: 622113528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-135-x-28-sku-622113528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,5 x 16 SKU: 622113516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-135-x-16-sku-622113516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,4 x 36 SKU: 622113436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-134-x-36-sku-622113436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,4 x 28 SKU: 622113428](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-134-x-28-sku-622113428/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,4 x 16 SKU: 622113416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-134-x-16-sku-622113416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13 x 36 SKU: 62211336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-13-x-36-sku-62211336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,3 x 36 SKU: 622113336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-133-x-36-sku-622113336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,3 x 28 SKU: 622113328](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-133-x-28-sku-622113328/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,3 x 16 SKU: 622113316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-133-x-16-sku-622113316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13 x 28 SKU: 62211328](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-13-x-28-sku-62211328/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,2 x 36 SKU: 622113236](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-132-x-36-sku-622113236/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,2 x 28 SKU: 622113228](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-132-x-28-sku-622113228/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,2 x 16 SKU: 622113216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-132-x-16-sku-622113216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13 x 16 SKU: 62211316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-13-x-16-sku-62211316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,1 x 36 SKU: 622113136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-131-x-36-sku-622113136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,1 x 28 SKU: 622113128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-131-x-28-sku-622113128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 13,1 x 16 SKU: 622113116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-131-x-16-sku-622113116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,9 x 36 SKU: 622112936](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-129-x-36-sku-622112936/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,9 x 28 SKU: 622112928](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-129-x-28-sku-622112928/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,9 x 16 SKU: 622112916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-129-x-16-sku-622112916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,8 x 36 SKU: 622112836](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-128-x-36-sku-622112836/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,8 x 28 SKU: 622112828](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-128-x-28-sku-622112828/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,8 x 16 SKU: 622112816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-128-x-16-sku-622112816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,7 x 36 SKU: 622112736](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-127-x-36-sku-622112736/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,7 x 28 SKU: 622112728](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-127-x-28-sku-622112728/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,7 x 16 SKU: 622112716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-127-x-16-sku-622112716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,6 x 36 SKU: 622112636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-126-x-36-sku-622112636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,6 x 28 SKU: 622112628](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-126-x-28-sku-622112628/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,6 x 16 SKU: 622112616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-126-x-16-sku-622112616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,5 x 36 SKU: 622112536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-125-x-36-sku-622112536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,5 x 28 SKU: 622112528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-125-x-28-sku-622112528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,5 x 16 SKU: 622112516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-125-x-16-sku-622112516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,4 x 36 SKU: 622112436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-124-x-36-sku-622112436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,4 x 28 SKU: 622112428](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-124-x-28-sku-622112428/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,4 x 16 SKU: 622112416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-124-x-16-sku-622112416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,3 x 36 SKU: 622112336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-123-x-36-sku-622112336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,3 x 28 SKU: 622112328](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-123-x-28-sku-622112328/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,3 x 16 SKU: 622112316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-123-x-16-sku-622112316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12 x 25 SKU: 62211225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-12-x-25-sku-62211225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 12,2 x 36 SKU: 622112236](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-122-x-36-sku-622112236/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 38 teeth material steel SKU: 12613800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-38-teeth-material-steel-sku-12613800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 36 teeth material steel SKU: 12613600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-36-teeth-material-steel-sku-12613600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 32 teeth material steel SKU: 12613200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-32-teeth-material-steel-sku-12613200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 30 teeth material steel SKU: 12613000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-30-teeth-material-steel-sku-12613000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 27 teeth material steel SKU: 12612700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-27-teeth-material-steel-sku-12612700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 25 teeth material steel SKU: 12612500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-25-teeth-material-steel-sku-12612500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 24 teeth material steel SKU: 12612400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-24-teeth-material-steel-sku-12612400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 23 teeth material steel SKU: 12612300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-23-teeth-material-steel-sku-12612300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 22 teeth material steel SKU: 12612200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-22-teeth-material-steel-sku-12612200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 21 teeth material steel SKU: 12612100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-21-teeth-material-steel-sku-12612100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 20 teeth material steel SKU: 12612000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-20-teeth-material-steel-sku-12612000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 19 teeth material steel SKU: 12611900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-19-teeth-material-steel-sku-12611900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 18 teeth material steel SKU: 12611800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-18-teeth-material-steel-sku-12611800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 17 teeth material steel SKU: 12611700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-17-teeth-material-steel-sku-12611700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 16 teeth material steel SKU: 12611600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-16-teeth-material-steel-sku-12611600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 15 teeth material steel SKU: 12611500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-15-teeth-material-steel-sku-12611500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 14 teeth material steel SKU: 12611400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-14-teeth-material-steel-sku-12611400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 13 teeth material steel SKU: 12611300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-13-teeth-material-steel-sku-12611300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 12 teeth material steel SKU: 12611200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-12-teeth-material-steel-sku-12611200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 11 teeth material steel SKU: 12611100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-11-teeth-material-steel-sku-12611100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 10 teeth material steel SKU: 12611000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-10-teeth-material-steel-sku-12611000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 9 teeth material steel SKU: 12610900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-9-teeth-material-steel-sku-12610900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 8 teeth material steel SKU: 12610800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-8-teeth-material-steel-sku-12610800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 25 teeth material steel teeth hardened SKU: 12588525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-teeth-hardened-sku-12588525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 23 teeth material steel teeth hardened SKU: 12588523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-teeth-hardened-sku-12588523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 21 teeth material steel teeth hardened SKU: 12588521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-teeth-hardened-sku-12588521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 20 teeth material steel teeth hardened SKU: 12588520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-teeth-hardened-sku-12588520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 19 teeth material steel teeth hardened SKU: 12588519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-teeth-hardened-sku-12588519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 18 teeth material steel teeth hardened SKU: 12588518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-teeth-hardened-sku-12588518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 17 teeth material steel teeth hardened SKU: 12588517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-teeth-hardened-sku-12588517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 16 teeth material steel teeth hardened SKU: 12588516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-teeth-hardened-sku-12588516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 15 teeth material steel teeth hardened SKU: 12588515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-teeth-hardened-sku-12588515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 14 teeth material steel teeth hardened SKU: 12588514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-14-teeth-material-steel-teeth-hardened-sku-12588514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 13 teeth material steel teeth hardened SKU: 12588513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-13-teeth-material-steel-teeth-hardened-sku-12588513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 12 teeth material steel teeth hardened SKU: 12588512](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-12-teeth-material-steel-teeth-hardened-sku-12588512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 25 teeth material steel teeth hardened SKU: 12588425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-teeth-hardened-sku-12588425/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 23 teeth material steel teeth hardened SKU: 12588423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-teeth-hardened-sku-12588423/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 21 teeth material steel teeth hardened SKU: 12588421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-teeth-hardened-sku-12588421/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 20 teeth material steel teeth hardened SKU: 12588420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-teeth-hardened-sku-12588420/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 19 teeth material steel teeth hardened SKU: 12588419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-teeth-hardened-sku-12588419/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 18 teeth material steel teeth hardened SKU: 12588418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-teeth-hardened-sku-12588418/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 17 teeth material steel teeth hardened SKU: 12588417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-teeth-hardened-sku-12588417/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 16 teeth material steel teeth hardened SKU: 12588416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-teeth-hardened-sku-12588416/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 15 teeth material steel teeth hardened SKU: 12588415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-teeth-hardened-sku-12588415/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 14 teeth material steel teeth hardened SKU: 12588414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-14-teeth-material-steel-teeth-hardened-sku-12588414/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 13 teeth material steel teeth hardened SKU: 12588413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-13-teeth-material-steel-teeth-hardened-sku-12588413/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 12 teeth material steel teeth hardened SKU: 12588412](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-12-teeth-material-steel-teeth-hardened-sku-12588412/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 40 teeth material steel teeth induction hardened SKU: 12588140](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-40-teeth-material-steel-teeth-induction-hardened-sku-12588140/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 38 teeth material steel teeth induction hardened SKU: 12588138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-38-teeth-material-steel-teeth-induction-hardened-sku-12588138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 36 teeth material steel teeth induction hardened SKU: 12588136](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-36-teeth-material-steel-teeth-induction-hardened-sku-12588136/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 35 teeth material steel teeth induction hardened SKU: 12588135](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-35-teeth-material-steel-teeth-induction-hardened-sku-12588135/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 32 teeth material steel teeth induction hardened SKU: 12588132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-32-teeth-material-steel-teeth-induction-hardened-sku-12588132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 30 teeth material steel teeth induction hardened SKU: 12588130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-30-teeth-material-steel-teeth-induction-hardened-sku-12588130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 28 teeth material steel teeth induction hardened SKU: 12588128](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-28-teeth-material-steel-teeth-induction-hardened-sku-12588128/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 27 teeth material steel teeth induction hardened SKU: 12588127](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-27-teeth-material-steel-teeth-induction-hardened-sku-12588127/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 26 teeth material steel teeth induction hardened SKU: 12588126](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-26-teeth-material-steel-teeth-induction-hardened-sku-12588126/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 25 teeth material steel teeth induction hardened SKU: 12588125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-25-teeth-material-steel-teeth-induction-hardened-sku-12588125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 24 teeth material steel teeth induction hardened SKU: 12588124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-24-teeth-material-steel-teeth-induction-hardened-sku-12588124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 23 teeth material steel teeth induction hardened SKU: 12588123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-23-teeth-material-steel-teeth-induction-hardened-sku-12588123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 22 teeth material steel teeth induction hardened SKU: 12588122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-22-teeth-material-steel-teeth-induction-hardened-sku-12588122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 21 teeth material steel teeth induction hardened SKU: 12588121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-21-teeth-material-steel-teeth-induction-hardened-sku-12588121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 20 teeth material steel teeth induction hardened SKU: 12588120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-20-teeth-material-steel-teeth-induction-hardened-sku-12588120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 19 teeth material steel teeth induction hardened SKU: 12588119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-19-teeth-material-steel-teeth-induction-hardened-sku-12588119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 18 teeth material steel teeth induction hardened SKU: 12588118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-18-teeth-material-steel-teeth-induction-hardened-sku-12588118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 17 teeth material steel teeth induction hardened SKU: 12588117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-17-teeth-material-steel-teeth-induction-hardened-sku-12588117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 16 teeth material steel teeth induction hardened SKU: 12588116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-16-teeth-material-steel-teeth-induction-hardened-sku-12588116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 15 teeth material steel teeth induction hardened SKU: 12588115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-15-teeth-material-steel-teeth-induction-hardened-sku-12588115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 14 teeth material steel teeth induction hardened SKU: 12588114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-14-teeth-material-steel-teeth-induction-hardened-sku-12588114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 13 teeth material steel teeth induction hardened SKU: 12588113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-13-teeth-material-steel-teeth-induction-hardened-sku-12588113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 12 teeth material steel teeth induction hardened SKU: 12588112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-12-teeth-material-steel-teeth-induction-hardened-sku-12588112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 11 teeth material steel teeth induction hardened SKU: 12588111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-11-teeth-material-steel-teeth-induction-hardened-sku-12588111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 10 teeth material steel teeth induction hardened SKU: 12588110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-10-teeth-material-steel-teeth-induction-hardened-sku-12588110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 9 teeth material steel teeth induction hardened SKU: 12588109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-9-teeth-material-steel-teeth-induction-hardened-sku-12588109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 8 teeth material steel teeth induction hardened SKU: 12588108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-8-teeth-material-steel-teeth-induction-hardened-sku-12588108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 08 B-2 30 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12583035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-30-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12583035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12583030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12583030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12583025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12583025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582135](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582135/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [drill bushing (guide bushing) similar DIN 172 - A 33,5 x 25 SKU: 622133525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-335-x-25-sku-622133525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 33 x 45 SKU: 62213345](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-33-x-45-sku-62213345/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 33 x 25 SKU: 62213325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-33-x-25-sku-62213325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 32 x 56 SKU: 62213256](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-32-x-56-sku-62213256/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 32,5 x 56 SKU: 622132556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-325-x-56-sku-622132556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 32,5 x 45 SKU: 622132545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-325-x-45-sku-622132545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 32,5 x 25 SKU: 622132525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-325-x-25-sku-622132525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 32 x 45 SKU: 62213245](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-32-x-45-sku-62213245/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 32 x 25 SKU: 62213225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-32-x-25-sku-62213225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 31 x 56 SKU: 62213156](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-31-x-56-sku-62213156/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 31,5 x 56 SKU: 622131556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-315-x-56-sku-622131556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 31,5 x 45 SKU: 622131545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-315-x-45-sku-622131545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 31,5 x 25 SKU: 622131525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-315-x-25-sku-622131525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 31 x 45 SKU: 62213145](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-31-x-45-sku-62213145/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 31 x 25 SKU: 62213125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-31-x-25-sku-62213125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 30 x 56 SKU: 62213056](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-30-x-56-sku-62213056/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 30,5 x 56 SKU: 622130556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-305-x-56-sku-622130556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 30,5 x 45 SKU: 622130545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-305-x-45-sku-622130545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 30,5 x 25 SKU: 622130525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-305-x-25-sku-622130525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 30 x 45 SKU: 62213045](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-30-x-45-sku-62213045/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 30 x 25 SKU: 62213025](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-30-x-25-sku-62213025/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 29 x 56 SKU: 62212956](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-29-x-56-sku-62212956/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 29,5 x 56 SKU: 622129556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-295-x-56-sku-622129556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 29,5 x 45 SKU: 622129545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-295-x-45-sku-622129545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 29,5 x 25 SKU: 622129525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-295-x-25-sku-622129525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 29 x 45 SKU: 62212945](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-29-x-45-sku-62212945/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 29 x 25 SKU: 62212925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-29-x-25-sku-62212925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 28 x 56 SKU: 62212856](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-28-x-56-sku-62212856/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 28,5 x 56 SKU: 622128556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-285-x-56-sku-622128556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 28,5 x 45 SKU: 622128545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-285-x-45-sku-622128545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 28,5 x 25 SKU: 622128525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-285-x-25-sku-622128525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 28 x 45 SKU: 62212845](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-28-x-45-sku-62212845/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 28 x 25 SKU: 62212825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-28-x-25-sku-62212825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 27 x 56 SKU: 62212756](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-27-x-56-sku-62212756/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 27,5 x 56 SKU: 622127556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-275-x-56-sku-622127556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 27,5 x 45 SKU: 622127545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-275-x-45-sku-622127545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 27,5 x 25 SKU: 622127525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-275-x-25-sku-622127525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 27 x 45 SKU: 62212745](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-27-x-45-sku-62212745/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 27 x 25 SKU: 62212725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-27-x-25-sku-62212725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 26,5 x 56 SKU: 622126556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-265-x-56-sku-622126556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 26,5 x 45 SKU: 622126545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-265-x-45-sku-622126545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 26,5 x 25 SKU: 622126525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-265-x-25-sku-622126525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 26 x 45 SKU: 62212645](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-26-x-45-sku-62212645/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 26 x 36 SKU: 62212636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-26-x-36-sku-62212636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 26 x 20 SKU: 62212620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-26-x-20-sku-62212620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 25,5 x 45 SKU: 622125545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-255-x-45-sku-622125545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 25,5 x 36 SKU: 622125536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-255-x-36-sku-622125536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 25,5 x 20 SKU: 622125520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-255-x-20-sku-622125520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 25 x 45 SKU: 62212545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-25-x-45-sku-62212545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 25 x 36 SKU: 62212536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-25-x-36-sku-62212536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 25 x 20 SKU: 62212520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-25-x-20-sku-62212520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 24,5 x 45 SKU: 622124545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-245-x-45-sku-622124545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 24,5 x 36 SKU: 622124536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-245-x-36-sku-622124536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 24,5 x 20 SKU: 622124520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-245-x-20-sku-622124520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 24 x 45 SKU: 62212445](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-24-x-45-sku-62212445/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 24 x 36 SKU: 62212436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-24-x-36-sku-62212436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 24 x 20 SKU: 62212420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-24-x-20-sku-62212420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 23,5 x 45 SKU: 622123545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-235-x-45-sku-622123545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 23,5 x 36 SKU: 622123536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-235-x-36-sku-622123536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 23,5 x 20 SKU: 622123520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-235-x-20-sku-622123520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 23 x 45 SKU: 62212345](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-23-x-45-sku-62212345/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 23 x 36 SKU: 62212336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-23-x-36-sku-62212336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 23 x 20 SKU: 62212320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-23-x-20-sku-62212320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 22,5 x 45 SKU: 622122545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-225-x-45-sku-622122545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 22,5 x 36 SKU: 622122536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-225-x-36-sku-622122536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 22,5 x 20 SKU: 622122520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-225-x-20-sku-622122520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 22 x 45 SKU: 62212245](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-22-x-45-sku-62212245/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 22 x 36 SKU: 62212236](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-22-x-36-sku-62212236/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 22 x 20 SKU: 62212220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-22-x-20-sku-62212220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 21,5 x 45 SKU: 622121545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-215-x-45-sku-622121545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 21,5 x 36 SKU: 622121536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-215-x-36-sku-622121536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 21,5 x 20 SKU: 622121520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-215-x-20-sku-622121520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 21 x 45 SKU: 62212145](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-21-x-45-sku-62212145/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 21 x 36 SKU: 62212136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-21-x-36-sku-62212136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 21 x 20 SKU: 62212120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-21-x-20-sku-62212120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 20,5 x 45 SKU: 622120545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-205-x-45-sku-622120545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 20,5 x 36 SKU: 622120536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-205-x-36-sku-622120536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 20,5 x 20 SKU: 622120520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-205-x-20-sku-622120520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 20 x 45 SKU: 62212045](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-20-x-45-sku-62212045/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 20 x 36 SKU: 62212036](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-20-x-36-sku-62212036/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 20 x 20 SKU: 62212020](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-20-x-20-sku-62212020/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 19,5 x 45 SKU: 622119545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-195-x-45-sku-622119545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 19,5 x 36 SKU: 622119536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-195-x-36-sku-622119536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 19,5 x 20 SKU: 622119520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-195-x-20-sku-622119520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 19 x 45 SKU: 62211945](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-19-x-45-sku-62211945/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 19 x 36 SKU: 62211936](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-19-x-36-sku-62211936/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 19 x 20 SKU: 62211920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-19-x-20-sku-62211920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 18,5 x 45 SKU: 622118545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-185-x-45-sku-622118545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 18,5 x 36 SKU: 622118536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-185-x-36-sku-622118536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 18,5 x 20 SKU: 622118520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-185-x-20-sku-622118520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 18 x 36 SKU: 62211836](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-18-x-36-sku-62211836/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 18 x 28 SKU: 62211828](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-18-x-28-sku-62211828/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 18 x 16 SKU: 62211816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-18-x-16-sku-62211816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 17,5 x 36 SKU: 622117536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-175-x-36-sku-622117536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 17,5 x 28 SKU: 622117528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-175-x-28-sku-622117528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 17,5 x 16 SKU: 622117516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-175-x-16-sku-622117516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 17 x 36 SKU: 62211736](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-17-x-36-sku-62211736/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 17 x 28 SKU: 62211728](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-17-x-28-sku-62211728/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 17 x 16 SKU: 62211716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-17-x-16-sku-62211716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 16,5 x 36 SKU: 622116536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-165-x-36-sku-622116536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681830](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681830/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681820](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681820/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681735](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681735/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681730](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681730/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681720](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681720/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681635](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681635/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681630](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681630/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681620](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681620/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681535](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681535/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681430](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681430/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681230](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681230/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 10 B-1 25 teeth material steel for taper-bush 2012 SKU: 12677425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-for-taper-bush-2012-sku-12677425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 23 teeth material steel for taper-bush 2012 SKU: 12677423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-for-taper-bush-2012-sku-12677423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 21 teeth material steel for taper-bush 2012 SKU: 12677421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-for-taper-bush-2012-sku-12677421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 20 teeth material steel for taper-bush 1610 SKU: 12677420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-for-taper-bush-1610-sku-12677420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 19 teeth material steel for taper-bush 1610 SKU: 12677419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-for-taper-bush-1610-sku-12677419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 18 teeth material steel for taper-bush 1610 SKU: 12677418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-for-taper-bush-1610-sku-12677418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 17 teeth material steel for taper-bush 1610 SKU: 12677417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-for-taper-bush-1610-sku-12677417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 16 teeth material steel for taper-bush 1210 SKU: 12677416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-for-taper-bush-1210-sku-12677416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 15 teeth material steel for taper-bush 1210 SKU: 12677415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-for-taper-bush-1210-sku-12677415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 14 teeth material steel for taper-bush 1108 SKU: 12677414](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-for-taper-bush-1108-sku-12677414/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 13 teeth material steel for taper-bush 1108 SKU: 12677413](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-for-taper-bush-1108-sku-12677413/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 12 teeth material steel for taper-bush 1108 SKU: 12677412](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-for-taper-bush-1108-sku-12677412/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 95 teeth material cast iron for taper bush type 3020 SKU: 12677183G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-95-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12677183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 76 teeth material cast iron for taper bush type 3020 SKU: 12677176G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12677176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 57 teeth material cast iron for taper bush type 2517 SKU: 12677157G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-57-teeth-material-cast-iron-for-taper-bush-type-2517-sku-12677157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 45 teeth material cast iron for taper bush type 2517 SKU: 12677145G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-45-teeth-material-cast-iron-for-taper-bush-type-2517-sku-12677145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 38 teeth material steel for taper bush type 2517 SKU: 12677138](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-38-teeth-material-steel-for-taper-bush-type-2517-sku-12677138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 30 teeth material steel for taper bush type 2012 SKU: 12677130](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-30-teeth-material-steel-for-taper-bush-type-2012-sku-12677130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 28 teeth material steel for taper bush type 2012 SKU: 12677128](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-28-teeth-material-steel-for-taper-bush-type-2012-sku-12677128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 27 teeth material steel for taper bush type 2012 SKU: 12677127](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-27-teeth-material-steel-for-taper-bush-type-2012-sku-12677127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 25 teeth material steel for taper bush type 2012 SKU: 12677125](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-25-teeth-material-steel-for-taper-bush-type-2012-sku-12677125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 24 teeth material steel for taper bush type 2012 SKU: 12677124](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-24-teeth-material-steel-for-taper-bush-type-2012-sku-12677124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 23 teeth material steel for taper bush type 1610 SKU: 12677123](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-23-teeth-material-steel-for-taper-bush-type-1610-sku-12677123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 22 teeth material steel for taper bush type 1610 SKU: 12677122](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-22-teeth-material-steel-for-taper-bush-type-1610-sku-12677122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 21 teeth material steel for taper bush type 1610 SKU: 12677121](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-21-teeth-material-steel-for-taper-bush-type-1610-sku-12677121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 20 teeth material steel for taper bush type 1610 SKU: 12677120](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-20-teeth-material-steel-for-taper-bush-type-1610-sku-12677120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 19 teeth material steel for taper bush type 1610 SKU: 12677119](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-19-teeth-material-steel-for-taper-bush-type-1610-sku-12677119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 18 teeth material steel for taper bush type 1610 SKU: 12677118](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-18-teeth-material-steel-for-taper-bush-type-1610-sku-12677118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 17 teeth material steel for taper bush type 1610 SKU: 12677117](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-17-teeth-material-steel-for-taper-bush-type-1610-sku-12677117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 16 teeth material steel for taper bush type 1610 SKU: 12677116](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-16-teeth-material-steel-for-taper-bush-type-1610-sku-12677116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 15 teeth material steel for taper bush type 1210 SKU: 12677115](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-15-teeth-material-steel-for-taper-bush-type-1210-sku-12677115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 10 B-1 25 teeth material steel SKU: 12642500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-sku-12642500/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 23 teeth material steel SKU: 12642300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-sku-12642300/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 21 teeth material steel SKU: 12642100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-sku-12642100/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 20 teeth material steel SKU: 12642000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-sku-12642000/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 19 teeth material steel SKU: 12641900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-sku-12641900/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 18 teeth material steel SKU: 12641800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-sku-12641800/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 17 teeth material steel SKU: 12641700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-sku-12641700/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 16 teeth material steel SKU: 12641600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-sku-12641600/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 15 teeth material steel SKU: 12641500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-sku-12641500/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 14 teeth material steel SKU: 12641400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-sku-12641400/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 13 teeth material steel SKU: 12641300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-sku-12641300/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 12 teeth material steel SKU: 12641200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-sku-12641200/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 114 teeth material steel SKU: 12628800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-114-teeth-material-steel-sku-12628800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 95 teeth material steel SKU: 12628300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-95-teeth-material-steel-sku-12628300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 76 teeth material steel SKU: 12627600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-76-teeth-material-steel-sku-12627600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 57 teeth material steel SKU: 12625700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-57-teeth-material-steel-sku-12625700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 48 teeth material steel SKU: 12624800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-48-teeth-material-steel-sku-12624800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 45 teeth material steel SKU: 12624500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-45-teeth-material-steel-sku-12624500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 38 teeth material steel SKU: 12623800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-38-teeth-material-steel-sku-12623800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 35 teeth material steel SKU: 12623500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-35-teeth-material-steel-sku-12623500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 30 teeth material steel SKU: 12623000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-30-teeth-material-steel-sku-12623000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 28 teeth material steel SKU: 12622800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-28-teeth-material-steel-sku-12622800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 27 teeth material steel SKU: 12622700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-27-teeth-material-steel-sku-12622700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 26 teeth material steel SKU: 12622600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-26-teeth-material-steel-sku-12622600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 24 teeth material steel SKU: 12622400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-24-teeth-material-steel-sku-12622400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 22 teeth material steel SKU: 12622200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-22-teeth-material-steel-sku-12622200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 21 teeth material steel SKU: 12622100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-21-teeth-material-steel-sku-12622100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 20 teeth material steel SKU: 12622000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-20-teeth-material-steel-sku-12622000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 19 teeth material steel SKU: 12621900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-19-teeth-material-steel-sku-12621900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 18 teeth material steel SKU: 12621800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-18-teeth-material-steel-sku-12621800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 17 teeth material steel SKU: 12621700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-17-teeth-material-steel-sku-12621700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 16 teeth material steel SKU: 12621600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-16-teeth-material-steel-sku-12621600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 15 teeth material steel SKU: 12621500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-15-teeth-material-steel-sku-12621500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 14 teeth material steel SKU: 12621400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-14-teeth-material-steel-sku-12621400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 13 teeth material steel SKU: 12621300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-13-teeth-material-steel-sku-12621300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 12 teeth material steel SKU: 12621200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-12-teeth-material-steel-sku-12621200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 11 teeth material steel SKU: 12621100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-11-teeth-material-steel-sku-12621100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 114 teeth material cast iron SKU: 12618800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-114-teeth-material-cast-iron-sku-12618800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 95 teeth material cast iron SKU: 12618300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-95-teeth-material-cast-iron-sku-12618300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 76 teeth material cast iron SKU: 12617600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-76-teeth-material-cast-iron-sku-12617600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 57 teeth material cast iron SKU: 12615700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-57-teeth-material-cast-iron-sku-12615700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 45 teeth material cast iron SKU: 12614500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-45-teeth-material-cast-iron-sku-12614500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [drill bushing (guide bushing) similar DIN 179 - A 3,6 x 8 SKU: 622203608](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-36-x-8-sku-622203608/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,5 x 16 SKU: 622203516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-35-x-16-sku-622203516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,5 x 12 SKU: 622203512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-35-x-12-sku-622203512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,5 x 8 SKU: 622203508](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-35-x-8-sku-622203508/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,4 x 16 SKU: 622203416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-34-x-16-sku-622203416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,4 x 12 SKU: 622203412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-34-x-12-sku-622203412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,4 x 8 SKU: 622203408](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-34-x-8-sku-622203408/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,3 x 16 SKU: 622203316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-33-x-16-sku-622203316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,3 x 12 SKU: 622203312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-33-x-12-sku-622203312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,3 x 8 SKU: 622203308](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-33-x-8-sku-622203308/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,2 x 16 SKU: 622203216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-32-x-16-sku-622203216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,2 x 12 SKU: 622203212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-32-x-12-sku-622203212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,2 x 8 SKU: 622203208](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-32-x-8-sku-622203208/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3 x 16 SKU: 62220316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-3-x-16-sku-62220316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3 x 12 SKU: 62220312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-3-x-12-sku-62220312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,1 x 16 SKU: 622203116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-31-x-16-sku-622203116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,1 x 12 SKU: 622203112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-31-x-12-sku-622203112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,1 x 8 SKU: 622203108](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-31-x-8-sku-622203108/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3 x 8 SKU: 62220308](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-3-x-8-sku-62220308/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,9 x 16 SKU: 622202916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-29-x-16-sku-622202916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,9 x 12 SKU: 622202912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-29-x-12-sku-622202912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,9 x 8 SKU: 622202908](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-29-x-8-sku-622202908/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,8 x 16 SKU: 622202816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-28-x-16-sku-622202816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,8 x 12 SKU: 622202812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-28-x-12-sku-622202812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,8 x 8 SKU: 622202808](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-28-x-8-sku-622202808/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,7 x 16 SKU: 622202716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-27-x-16-sku-622202716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,7 x 12 SKU: 622202712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-27-x-12-sku-622202712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,7 x 8 SKU: 622202708](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-27-x-8-sku-622202708/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,6 x 9 SKU: 622202609](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-26-x-9-sku-622202609/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,6 x 6 SKU: 622202606](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-26-x-6-sku-622202606/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,5 x 9 SKU: 622202509](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-25-x-9-sku-622202509/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,5 x 6 SKU: 622202506](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-25-x-6-sku-622202506/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,4 x 9 SKU: 622202409](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-24-x-9-sku-622202409/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,4 x 6 SKU: 622202406](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-24-x-6-sku-622202406/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,3 x 9 SKU: 622202309](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-23-x-9-sku-622202309/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,3 x 6 SKU: 622202306](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-23-x-6-sku-622202306/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,2 x 9 SKU: 622202209](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-22-x-9-sku-622202209/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,2 x 6 SKU: 622202206](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-22-x-6-sku-622202206/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,1 x 9 SKU: 622202109](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-21-x-9-sku-622202109/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2,1 x 6 SKU: 622202106](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-21-x-6-sku-622202106/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2 x 9 SKU: 62220209](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-2-x-9-sku-62220209/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 2 x 6 SKU: 62220206](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-2-x-6-sku-62220206/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,9 x 9 SKU: 622201909](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-19-x-9-sku-622201909/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,9 x 6 SKU: 622201906](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-19-x-6-sku-622201906/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,8 x 9 SKU: 622201809](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-18-x-9-sku-622201809/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,8 x 6 SKU: 622201806](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-18-x-6-sku-622201806/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,7 x 9 SKU: 622201709](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-17-x-9-sku-622201709/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,7 x 6 SKU: 622201706](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-17-x-6-sku-622201706/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,6 x 9 SKU: 622201609](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-16-x-9-sku-622201609/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,6 x 6 SKU: 622201606](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-16-x-6-sku-622201606/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,5 x 9 SKU: 622201509](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-15-x-9-sku-622201509/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,5 x 6 SKU: 622201506](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-15-x-6-sku-622201506/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,4 x 9 SKU: 622201409](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-14-x-9-sku-622201409/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,4 x 6 SKU: 622201406](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-14-x-6-sku-622201406/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,3 x 9 SKU: 622201309](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-13-x-9-sku-622201309/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,3 x 6 SKU: 622201306](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-13-x-6-sku-622201306/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,2 x 9 SKU: 622201209](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-12-x-9-sku-622201209/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,2 x 6 SKU: 622201206](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-12-x-6-sku-622201206/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,1 x 9 SKU: 622201109](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-11-x-9-sku-622201109/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1,1 x 6 SKU: 622201106](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-11-x-6-sku-622201106/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1 x 9 SKU: 62220109](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-1-x-9-sku-62220109/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 1 x 6 SKU: 62220106](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-1-x-6-sku-62220106/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 0,9 x 9 SKU: 622200909](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-09-x-9-sku-622200909/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 0,9 x 6 SKU: 622200906](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-09-x-6-sku-622200906/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 0,8 x 6 SKU: 622200806](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-08-x-6-sku-622200806/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 0,7 x 6 SKU: 622200706](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-07-x-6-sku-622200706/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 0,6 x 6 SKU: 622200606](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-06-x-6-sku-622200606/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 42 x 67 SKU: 62214267](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-42-x-67-sku-62214267/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 42 x 56 SKU: 62214256](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-42-x-56-sku-62214256/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 42 x 30 SKU: 62214230](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-42-x-30-sku-62214230/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 41 x 67 SKU: 62214167](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-41-x-67-sku-62214167/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 41 x 56 SKU: 62214156](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-41-x-56-sku-62214156/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 41 x 30 SKU: 62214130](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-41-x-30-sku-62214130/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 40 x 67 SKU: 62214067](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-40-x-67-sku-62214067/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 40 x 56 SKU: 62214056](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-40-x-56-sku-62214056/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 40 x 30 SKU: 62214030](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-40-x-30-sku-62214030/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 39 x 67 SKU: 62213967](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-39-x-67-sku-62213967/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 39 x 56 SKU: 62213956](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-39-x-56-sku-62213956/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 39 x 30 SKU: 62213930](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-39-x-30-sku-62213930/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 38 x 67 SKU: 62213867](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-38-x-67-sku-62213867/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 38 x 56 SKU: 62213856](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-38-x-56-sku-62213856/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 38 x 30 SKU: 62213830](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-38-x-30-sku-62213830/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 37 x 67 SKU: 62213767](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-37-x-67-sku-62213767/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 37 x 56 SKU: 62213756](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-37-x-56-sku-62213756/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 37 x 30 SKU: 62213730](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-37-x-30-sku-62213730/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 36 x 67 SKU: 62213667](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-36-x-67-sku-62213667/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 36 x 56 SKU: 62213656](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-36-x-56-sku-62213656/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 36 x 30 SKU: 62213630](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-36-x-30-sku-62213630/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 35 x 56 SKU: 62213556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-35-x-56-sku-62213556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 35 x 45 SKU: 62213545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-35-x-45-sku-62213545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 35 x 25 SKU: 62213525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-35-x-25-sku-62213525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 34 x 56 SKU: 62213456](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-34-x-56-sku-62213456/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 34,5 x 56 SKU: 622134556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-345-x-56-sku-622134556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 34,5 x 45 SKU: 622134545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-345-x-45-sku-622134545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 34,5 x 25 SKU: 622134525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-345-x-25-sku-622134525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 34 x 45 SKU: 62213445](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-34-x-45-sku-62213445/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 34 x 25 SKU: 62213425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-34-x-25-sku-62213425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 33 x 56 SKU: 62213356](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-33-x-56-sku-62213356/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 33,5 x 56 SKU: 622133556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-335-x-56-sku-622133556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 172 - A 33,5 x 45 SKU: 622133545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-172-a-335-x-45-sku-622133545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Drill bushes with collar similar to the old Standard DIN 172 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at flange side. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 22 teeth material steel SKU: 12712200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-22-teeth-material-steel-sku-12712200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 21 teeth material steel SKU: 12712100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-21-teeth-material-steel-sku-12712100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 20 teeth material steel SKU: 12712000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-20-teeth-material-steel-sku-12712000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 19 teeth material steel SKU: 12711900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-19-teeth-material-steel-sku-12711900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 18 teeth material steel SKU: 12711800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-18-teeth-material-steel-sku-12711800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 17 teeth material steel SKU: 12711700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-17-teeth-material-steel-sku-12711700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 16 teeth material steel SKU: 12711600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-16-teeth-material-steel-sku-12711600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 15 teeth material steel SKU: 12711500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-15-teeth-material-steel-sku-12711500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 14 teeth material steel SKU: 12711400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-14-teeth-material-steel-sku-12711400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 13 teeth material steel SKU: 12711300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-13-teeth-material-steel-sku-12711300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 12 teeth material steel SKU: 12711200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-12-teeth-material-steel-sku-12711200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 11 teeth material steel SKU: 12711100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-11-teeth-material-steel-sku-12711100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 10 teeth material steel SKU: 12711000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-10-teeth-material-steel-sku-12711000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 9 teeth material steel SKU: 12710900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-9-teeth-material-steel-sku-12710900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 8 teeth material steel SKU: 12710800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-8-teeth-material-steel-sku-12710800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 10 B-2 5/8x3/8" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12699112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-10-b-2-5-8x3-8-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12699112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 25 teeth material steel teeth hardened SKU: 12688525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-teeth-hardened-sku-12688525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 23 teeth material steel teeth hardened SKU: 12688523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-teeth-hardened-sku-12688523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 21 teeth material steel teeth hardened SKU: 12688521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-teeth-hardened-sku-12688521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 20 teeth material steel teeth hardened SKU: 12688520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-teeth-hardened-sku-12688520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 19 teeth material steel teeth hardened SKU: 12688519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-teeth-hardened-sku-12688519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 18 teeth material steel teeth hardened SKU: 12688518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-teeth-hardened-sku-12688518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 17 teeth material steel teeth hardened SKU: 12688517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-teeth-hardened-sku-12688517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 16 teeth material steel teeth hardened SKU: 12688516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-teeth-hardened-sku-12688516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 15 teeth material steel teeth hardened SKU: 12688515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-teeth-hardened-sku-12688515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 14 teeth material steel teeth hardened SKU: 12688514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-teeth-hardened-sku-12688514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 13 teeth material steel teeth hardened SKU: 12688513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-teeth-hardened-sku-12688513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 10 B-1 12 teeth material steel teeth hardened SKU: 12688512](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-teeth-hardened-sku-12688512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 9,1 mm, B2 = 36 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 25 teeth material steel teeth hardened SKU: 12688425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-teeth-hardened-sku-12688425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 23 teeth material steel teeth hardened SKU: 12688423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-teeth-hardened-sku-12688423/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 21 teeth material steel teeth hardened SKU: 12688421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-teeth-hardened-sku-12688421/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 20 teeth material steel teeth hardened SKU: 12688420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-teeth-hardened-sku-12688420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 19 teeth material steel teeth hardened SKU: 12688419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-teeth-hardened-sku-12688419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 18 teeth material steel teeth hardened SKU: 12688418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-teeth-hardened-sku-12688418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 17 teeth material steel teeth hardened SKU: 12688417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-teeth-hardened-sku-12688417/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 16 teeth material steel teeth hardened SKU: 12688416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-teeth-hardened-sku-12688416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 15 teeth material steel teeth hardened SKU: 12688415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-teeth-hardened-sku-12688415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 14 teeth material steel teeth hardened SKU: 12688414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-teeth-hardened-sku-12688414/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 13 teeth material steel teeth hardened SKU: 12688413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-teeth-hardened-sku-12688413/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 10 B-1 12 teeth material steel teeth hardened SKU: 12688412](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-teeth-hardened-sku-12688412/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 38 teeth material steel teeth induction hardened SKU: 12688138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-38-teeth-material-steel-teeth-induction-hardened-sku-12688138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 36 teeth material steel teeth induction hardened SKU: 12688136](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-36-teeth-material-steel-teeth-induction-hardened-sku-12688136/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 32 teeth material steel teeth induction hardened SKU: 12688132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-32-teeth-material-steel-teeth-induction-hardened-sku-12688132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 30 teeth material steel teeth induction hardened SKU: 12688130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-30-teeth-material-steel-teeth-induction-hardened-sku-12688130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 27 teeth material steel teeth induction hardened SKU: 12688127](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-27-teeth-material-steel-teeth-induction-hardened-sku-12688127/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 25 teeth material steel teeth induction hardened SKU: 12688125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-25-teeth-material-steel-teeth-induction-hardened-sku-12688125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 24 teeth material steel teeth induction hardened SKU: 12688124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-24-teeth-material-steel-teeth-induction-hardened-sku-12688124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 23 teeth material steel teeth induction hardened SKU: 12688123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-23-teeth-material-steel-teeth-induction-hardened-sku-12688123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 22 teeth material steel teeth induction hardened SKU: 12688122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-22-teeth-material-steel-teeth-induction-hardened-sku-12688122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 21 teeth material steel teeth induction hardened SKU: 12688121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-21-teeth-material-steel-teeth-induction-hardened-sku-12688121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 20 teeth material steel teeth induction hardened SKU: 12688120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-20-teeth-material-steel-teeth-induction-hardened-sku-12688120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 19 teeth material steel teeth induction hardened SKU: 12688119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-19-teeth-material-steel-teeth-induction-hardened-sku-12688119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 18 teeth material steel teeth induction hardened SKU: 12688118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-18-teeth-material-steel-teeth-induction-hardened-sku-12688118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 17 teeth material steel teeth induction hardened SKU: 12688117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-17-teeth-material-steel-teeth-induction-hardened-sku-12688117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 16 teeth material steel teeth induction hardened SKU: 12688116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-16-teeth-material-steel-teeth-induction-hardened-sku-12688116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 15 teeth material steel teeth induction hardened SKU: 12688115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-15-teeth-material-steel-teeth-induction-hardened-sku-12688115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 14 teeth material steel teeth induction hardened SKU: 12688114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-14-teeth-material-steel-teeth-induction-hardened-sku-12688114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 13 teeth material steel teeth induction hardened SKU: 12688113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-13-teeth-material-steel-teeth-induction-hardened-sku-12688113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 12 teeth material steel teeth induction hardened SKU: 12688112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-12-teeth-material-steel-teeth-induction-hardened-sku-12688112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 11 teeth material steel teeth induction hardened SKU: 12688111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-11-teeth-material-steel-teeth-induction-hardened-sku-12688111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 10 teeth material steel teeth induction hardened SKU: 12688110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-10-teeth-material-steel-teeth-induction-hardened-sku-12688110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 9 teeth material steel teeth induction hardened SKU: 12688109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-9-teeth-material-steel-teeth-induction-hardened-sku-12688109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 10 B-2 5/8x3/8" 8 teeth material steel teeth induction hardened SKU: 12688108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-10-b-2-5-8x3-8-8-teeth-material-steel-teeth-induction-hardened-sku-12688108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 9 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 10 B-2 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682540](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682540/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682535](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682535/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682430](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682430/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682340](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682340/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682335](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682335/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682230](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682230/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682140](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682140/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682135](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682135/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682040](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682040/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12682020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12682020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681940](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681940/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681935](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681935/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681930](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681930/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681920](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681920/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681840](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681840/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681835](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681835/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [drill bushing (guide bushing) similar DIN 179 - A 6,9 x 16 SKU: 622206916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-69-x-16-sku-622206916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,9 x 10 SKU: 622206910](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-69-x-10-sku-622206910/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,8 x 20 SKU: 622206820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-68-x-20-sku-622206820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,8 x 16 SKU: 622206816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-68-x-16-sku-622206816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,8 x 10 SKU: 622206810](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-68-x-10-sku-622206810/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,7 x 20 SKU: 622206720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-67-x-20-sku-622206720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,7 x 16 SKU: 622206716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-67-x-16-sku-622206716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,7 x 10 SKU: 622206710](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-67-x-10-sku-622206710/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,6 x 20 SKU: 622206620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-66-x-20-sku-622206620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,6 x 16 SKU: 622206616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-66-x-16-sku-622206616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,6 x 10 SKU: 622206610](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-66-x-10-sku-622206610/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,5 x 20 SKU: 622206520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-65-x-20-sku-622206520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,5 x 16 SKU: 622206516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-65-x-16-sku-622206516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,5 x 10 SKU: 622206510](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-65-x-10-sku-622206510/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,4 x 20 SKU: 622206420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-64-x-20-sku-622206420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,4 x 16 SKU: 622206416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-64-x-16-sku-622206416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,4 x 10 SKU: 622206410](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-64-x-10-sku-622206410/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,3 x 20 SKU: 622206320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-63-x-20-sku-622206320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,3 x 16 SKU: 622206316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-63-x-16-sku-622206316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,3 x 10 SKU: 622206310](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-63-x-10-sku-622206310/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,2 x 20 SKU: 622206220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-62-x-20-sku-622206220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,2 x 16 SKU: 622206216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-62-x-16-sku-622206216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,2 x 10 SKU: 622206210](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-62-x-10-sku-622206210/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6 x 20 SKU: 62220620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-6-x-20-sku-62220620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6 x 16 SKU: 62220616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-6-x-16-sku-62220616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,1 x 20 SKU: 622206120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-61-x-20-sku-622206120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,1 x 16 SKU: 622206116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-61-x-16-sku-622206116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,1 x 10 SKU: 622206110](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-61-x-10-sku-622206110/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6 x 10 SKU: 62220610](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-6-x-10-sku-62220610/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,9 x 20 SKU: 622205920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-59-x-20-sku-622205920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,9 x 16 SKU: 622205916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-59-x-16-sku-622205916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,9 x 10 SKU: 622205910](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-59-x-10-sku-622205910/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,8 x 20 SKU: 622205820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-58-x-20-sku-622205820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,8 x 16 SKU: 622205816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-58-x-16-sku-622205816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,8 x 10 SKU: 622205810](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-58-x-10-sku-622205810/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,7 x 20 SKU: 622205720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-57-x-20-sku-622205720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,7 x 16 SKU: 622205716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-57-x-16-sku-622205716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,7 x 10 SKU: 622205710](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-57-x-10-sku-622205710/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,6 x 20 SKU: 622205620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-56-x-20-sku-622205620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,6 x 16 SKU: 622205616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-56-x-16-sku-622205616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,6 x 10 SKU: 622205610](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-56-x-10-sku-622205610/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,5 x 20 SKU: 622205520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-55-x-20-sku-622205520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,5 x 16 SKU: 622205516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-55-x-16-sku-622205516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,5 x 10 SKU: 622205510](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-55-x-10-sku-622205510/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,4 x 20 SKU: 622205420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-54-x-20-sku-622205420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,4 x 16 SKU: 622205416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-54-x-16-sku-622205416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,4 x 10 SKU: 622205410](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-54-x-10-sku-622205410/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,3 x 20 SKU: 622205320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-53-x-20-sku-622205320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,3 x 16 SKU: 622205316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-53-x-16-sku-622205316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,3 x 10 SKU: 622205310](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-53-x-10-sku-622205310/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,2 x 20 SKU: 622205220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-52-x-20-sku-622205220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,2 x 16 SKU: 622205216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-52-x-16-sku-622205216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,2 x 10 SKU: 622205210](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-52-x-10-sku-622205210/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5 x 16 SKU: 62220516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-5-x-16-sku-62220516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,1 x 20 SKU: 622205120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-51-x-20-sku-622205120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5 x 12 SKU: 62220512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-5-x-12-sku-62220512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,1 x 16 SKU: 622205116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-51-x-16-sku-622205116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5,1 x 10 SKU: 622205110](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-51-x-10-sku-622205110/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 5 x 8 SKU: 62220508](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-5-x-8-sku-62220508/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,9 x 16 SKU: 622204916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-49-x-16-sku-622204916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,9 x 12 SKU: 622204912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-49-x-12-sku-622204912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,9 x 8 SKU: 622204908](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-49-x-8-sku-622204908/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,8 x 16 SKU: 622204816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-48-x-16-sku-622204816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,8 x 12 SKU: 622204812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-48-x-12-sku-622204812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,8 x 8 SKU: 622204808](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-48-x-8-sku-622204808/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,7 x 16 SKU: 622204716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-47-x-16-sku-622204716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,7 x 12 SKU: 622204712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-47-x-12-sku-622204712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,7 x 8 SKU: 622204708](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-47-x-8-sku-622204708/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,6 x 16 SKU: 622204616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-46-x-16-sku-622204616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,6 x 12 SKU: 622204612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-46-x-12-sku-622204612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,6 x 8 SKU: 622204608](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-46-x-8-sku-622204608/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,5 x 16 SKU: 622204516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-45-x-16-sku-622204516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,5 x 12 SKU: 622204512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-45-x-12-sku-622204512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,5 x 8 SKU: 622204508](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-45-x-8-sku-622204508/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,4 x 16 SKU: 622204416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-44-x-16-sku-622204416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,4 x 12 SKU: 622204412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-44-x-12-sku-622204412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,4 x 8 SKU: 622204408](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-44-x-8-sku-622204408/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,3 x 16 SKU: 622204316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-43-x-16-sku-622204316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,3 x 12 SKU: 622204312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-43-x-12-sku-622204312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,3 x 8 SKU: 622204308](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-43-x-8-sku-622204308/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,2 x 16 SKU: 622204216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-42-x-16-sku-622204216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,2 x 12 SKU: 622204212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-42-x-12-sku-622204212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,2 x 8 SKU: 622204208](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-42-x-8-sku-622204208/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4 x 16 SKU: 62220416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-4-x-16-sku-62220416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4 x 12 SKU: 62220412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-4-x-12-sku-62220412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,1 x 16 SKU: 622204116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-41-x-16-sku-622204116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,1 x 12 SKU: 622204112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-41-x-12-sku-622204112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4,1 x 8 SKU: 622204108](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-41-x-8-sku-622204108/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 4 x 8 SKU: 62220408](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-4-x-8-sku-62220408/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,9 x 16 SKU: 622203916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-39-x-16-sku-622203916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,9 x 12 SKU: 622203912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-39-x-12-sku-622203912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,9 x 8 SKU: 622203908](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-39-x-8-sku-622203908/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,8 x 16 SKU: 622203816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-38-x-16-sku-622203816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,8 x 12 SKU: 622203812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-38-x-12-sku-622203812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,8 x 8 SKU: 622203808](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-38-x-8-sku-622203808/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,7 x 16 SKU: 622203716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-37-x-16-sku-622203716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,7 x 12 SKU: 622203712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-37-x-12-sku-622203712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,7 x 8 SKU: 622203708](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-37-x-8-sku-622203708/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,6 x 16 SKU: 622203616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-36-x-16-sku-622203616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 3,6 x 12 SKU: 622203612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-36-x-12-sku-622203612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Double-strand sprocket ZRF with hub 12 B-2 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781640](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781640/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781635](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781635/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781630](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781630/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781535](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781535/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781435](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781435/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781430](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781430/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781335](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781335/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781235](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781235/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781230](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781230/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 12 B-1 25 teeth material steel for taper-bush 2517 SKU: 12777425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-25-teeth-material-steel-for-taper-bush-2517-sku-12777425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 23 teeth material steel for taper-bush 2517 SKU: 12777423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-23-teeth-material-steel-for-taper-bush-2517-sku-12777423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 21 teeth material steel for taper-bush 2517 SKU: 12777421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-21-teeth-material-steel-for-taper-bush-2517-sku-12777421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 20 teeth material steel for taper-bush 2517 SKU: 12777420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-20-teeth-material-steel-for-taper-bush-2517-sku-12777420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 19 teeth material steel for taper-bush 2012 SKU: 12777419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-19-teeth-material-steel-for-taper-bush-2012-sku-12777419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 18 teeth material steel for taper-bush 2012 SKU: 12777418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-18-teeth-material-steel-for-taper-bush-2012-sku-12777418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 17 teeth material steel for taper-bush 1610 SKU: 12777417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-17-teeth-material-steel-for-taper-bush-1610-sku-12777417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 16 teeth material steel for taper-bush 1610 SKU: 12777416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-16-teeth-material-steel-for-taper-bush-1610-sku-12777416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 15 teeth material steel for taper-bush 1610 SKU: 12777415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-15-teeth-material-steel-for-taper-bush-1610-sku-12777415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 14 teeth material steel for taper-bush 1210 SKU: 12777414](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-14-teeth-material-steel-for-taper-bush-1210-sku-12777414/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 12 B-1 13 teeth material steel for taper-bush 1210 SKU: 12777413](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-12-b-1-13-teeth-material-steel-for-taper-bush-1210-sku-12777413/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 114 teeth material cast iron for taper bush type 3030 SKU: 12777188G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-114-teeth-material-cast-iron-for-taper-bush-type-3030-sku-12777188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 95 teeth material cast iron for taper bush type 3020 SKU: 12777183G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12777183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 76 teeth material cast iron for taper bush type 3020 SKU: 12777176G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12777176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 57 teeth material cast iron for taper bush type 3020 SKU: 12777157G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-57-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12777157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 57 teeth material steel for taper bush type 3020 SKU: 12777157](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-57-teeth-material-steel-for-taper-bush-type-3020-sku-12777157/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 45 teeth material cast iron for taper bush type 3020 SKU: 12777145G](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-45-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12777145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 45 teeth material steel for taper bush type 3020 SKU: 12777145](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-45-teeth-material-steel-for-taper-bush-type-3020-sku-12777145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 38 teeth material steel for taper bush type 3020 SKU: 12777138](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-38-teeth-material-steel-for-taper-bush-type-3020-sku-12777138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 30 teeth material steel for taper bush type 2517 SKU: 12777130](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-30-teeth-material-steel-for-taper-bush-type-2517-sku-12777130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 28 teeth material steel for taper bush type 2517 SKU: 12777128](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-28-teeth-material-steel-for-taper-bush-type-2517-sku-12777128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 27 teeth material steel for taper bush type 2517 SKU: 12777127](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-27-teeth-material-steel-for-taper-bush-type-2517-sku-12777127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 26 teeth material steel for taper bush type 2517 SKU: 12777126](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-26-teeth-material-steel-for-taper-bush-type-2517-sku-12777126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 25 teeth material steel for taper bush type 2517 SKU: 12777125](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-25-teeth-material-steel-for-taper-bush-type-2517-sku-12777125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 24 teeth material steel for taper bush type 2517 SKU: 12777124](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-24-teeth-material-steel-for-taper-bush-type-2517-sku-12777124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 23 teeth material steel for taper bush type 2517 SKU: 12777123](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-23-teeth-material-steel-for-taper-bush-type-2517-sku-12777123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 22 teeth material steel for taper bush type 2517 SKU: 12777122](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-22-teeth-material-steel-for-taper-bush-type-2517-sku-12777122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 21 teeth material steel for taper bush type 2517 SKU: 12777121](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-21-teeth-material-steel-for-taper-bush-type-2517-sku-12777121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 20 teeth material steel for taper bush type 2517 SKU: 12777120](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-20-teeth-material-steel-for-taper-bush-type-2517-sku-12777120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 19 teeth material steel for taper bush type 2012 SKU: 12777119](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-19-teeth-material-steel-for-taper-bush-type-2012-sku-12777119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 18 teeth material steel for taper bush type 2012 SKU: 12777118](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-18-teeth-material-steel-for-taper-bush-type-2012-sku-12777118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 17 teeth material steel for taper bush type 1610 SKU: 12777117](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-17-teeth-material-steel-for-taper-bush-type-1610-sku-12777117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 16 teeth material steel for taper bush type 1610 SKU: 12777116](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-16-teeth-material-steel-for-taper-bush-type-1610-sku-12777116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 15 teeth material steel for taper bush type 1610 SKU: 12777115](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-15-teeth-material-steel-for-taper-bush-type-1610-sku-12777115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 12 B-2 3/4x7/16" 14 teeth material steel for taper bush type 1610 SKU: 12777114](https://maedler.in/product/double-strand-sprocket-zrt-12-b-2-3-4x7-16-14-teeth-material-steel-for-taper-bush-type-1610-sku-12777114/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 11,1 mm, B2 = 30,3 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 12 B-1 25 teeth material steel SKU: 12742500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-25-teeth-material-steel-sku-12742500/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 23 teeth material steel SKU: 12742300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-23-teeth-material-steel-sku-12742300/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 21 teeth material steel SKU: 12742100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-21-teeth-material-steel-sku-12742100/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 20 teeth material steel SKU: 12742000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-20-teeth-material-steel-sku-12742000/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 19 teeth material steel SKU: 12741900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-19-teeth-material-steel-sku-12741900/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 18 teeth material steel SKU: 12741800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-18-teeth-material-steel-sku-12741800/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 17 teeth material steell SKU: 12741700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-17-teeth-material-steell-sku-12741700/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 16 teeth material steel SKU: 12741600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-16-teeth-material-steel-sku-12741600/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 15 teeth material steel SKU: 12741500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-15-teeth-material-steel-sku-12741500/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 14 teeth material steel SKU: 12741400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-14-teeth-material-steel-sku-12741400/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 13 teeth material steel SKU: 12741300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-13-teeth-material-steel-sku-12741300/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 12 B-1 12 teeth material steel SKU: 12741200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-12-b-1-12-teeth-material-steel-sku-12741200/): Material: Steel C43, not hardened. Pre-bored. Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 114 teeth material steel SKU: 12728800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-114-teeth-material-steel-sku-12728800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 95 teeth material steel SKU: 12728300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-95-teeth-material-steel-sku-12728300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 76 teeth material steel SKU: 12727600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-76-teeth-material-steel-sku-12727600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 57 teeth material steel SKU: 12725700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-57-teeth-material-steel-sku-12725700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 48 teeth material steel SKU: 12724800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-48-teeth-material-steel-sku-12724800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 45 teeth material steel SKU: 12724500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-45-teeth-material-steel-sku-12724500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 38 teeth material steel SKU: 12723800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-38-teeth-material-steel-sku-12723800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 35 teeth material steel SKU: 12723500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-35-teeth-material-steel-sku-12723500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 30 teeth material steel SKU: 12723000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-30-teeth-material-steel-sku-12723000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 27 teeth material steel SKU: 12722700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-27-teeth-material-steel-sku-12722700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 24 teeth material steel SKU: 12722400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-24-teeth-material-steel-sku-12722400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 22 teeth material steel SKU: 12722200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-22-teeth-material-steel-sku-12722200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 20 teeth material steel SKU: 12722000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-20-teeth-material-steel-sku-12722000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 18 teeth material steel SKU: 12721800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-18-teeth-material-steel-sku-12721800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 16 teeth material steel SKU: 12721600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-16-teeth-material-steel-sku-12721600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 15 teeth material steel SKU: 12721500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-15-teeth-material-steel-sku-12721500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 14 teeth material steel SKU: 12721400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-14-teeth-material-steel-sku-12721400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 13 teeth material steel SKU: 12721300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-13-teeth-material-steel-sku-12721300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 12 teeth material steel SKU: 12721200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-12-teeth-material-steel-sku-12721200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 12 B-2 3/4x7/16" 11 teeth material steel SKU: 12721100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-12-b-2-3-4x7-16-11-teeth-material-steel-sku-12721100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 95 teeth material cast iron SKU: 12718300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-95-teeth-material-cast-iron-sku-12718300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 76 teeth material cast iron SKU: 12717600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-76-teeth-material-cast-iron-sku-12717600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 57 teeth material cast iron SKU: 12715700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-57-teeth-material-cast-iron-sku-12715700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 45 teeth material cast iron SKU: 12714500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-45-teeth-material-cast-iron-sku-12714500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 38 teeth material steel SKU: 12713800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-38-teeth-material-steel-sku-12713800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 32 teeth material steel SKU: 12713200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-32-teeth-material-steel-sku-12713200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 30 teeth material steel SKU: 12713000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-30-teeth-material-steel-sku-12713000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 25 teeth material steel SKU: 12712500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-25-teeth-material-steel-sku-12712500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 24 teeth material steel SKU: 12712400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-24-teeth-material-steel-sku-12712400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 23 teeth material steel SKU: 12712300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-23-teeth-material-steel-sku-12712300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [drill bushing (guide bushing) similar DIN 179 - A 10 x 25 SKU: 62221025](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-10-x-25-sku-62221025/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,2 x 25 SKU: 622210225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-102-x-25-sku-622210225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,2 x 20 SKU: 622210220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-102-x-20-sku-622210220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,2 x 12 SKU: 622210212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-102-x-12-sku-622210212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10 x 20 SKU: 62221020](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-10-x-20-sku-62221020/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,1 x 25 SKU: 622210125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-101-x-25-sku-622210125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,1 x 20 SKU: 622210120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-101-x-20-sku-622210120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10 x 12 SKU: 62221012](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-10-x-12-sku-62221012/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,1 x 12 SKU: 622210112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-101-x-12-sku-622210112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,9 x 25 SKU: 622209925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-99-x-25-sku-622209925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,9 x 20 SKU: 622209920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-99-x-20-sku-622209920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,9 x 12 SKU: 622209912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-99-x-12-sku-622209912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,8 x 25 SKU: 622209825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-98-x-25-sku-622209825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,8 x 20 SKU: 622209820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-98-x-20-sku-622209820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,8 x 12 SKU: 622209812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-98-x-12-sku-622209812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,7 x 25 SKU: 622209725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-97-x-25-sku-622209725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,7 x 20 SKU: 622209720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-97-x-20-sku-622209720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,7 x 12 SKU: 622209712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-97-x-12-sku-622209712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,6 x 25 SKU: 622209625](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-96-x-25-sku-622209625/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,6 x 20 SKU: 622209620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-96-x-20-sku-622209620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,6 x 12 SKU: 622209612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-96-x-12-sku-622209612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,5 x 25 SKU: 622209525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-95-x-25-sku-622209525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,5 x 20 SKU: 622209520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-95-x-20-sku-622209520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,5 x 12 SKU: 622209512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-95-x-12-sku-622209512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,4 x 25 SKU: 622209425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-94-x-25-sku-622209425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,4 x 20 SKU: 622209420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-94-x-20-sku-622209420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,4 x 12 SKU: 622209412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-94-x-12-sku-622209412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,3 x 25 SKU: 622209325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-93-x-25-sku-622209325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,3 x 20 SKU: 622209320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-93-x-20-sku-622209320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,3 x 12 SKU: 622209312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-93-x-12-sku-622209312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9 x 25 SKU: 62220925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-9-x-25-sku-62220925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,2 x 25 SKU: 622209225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-92-x-25-sku-622209225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,2 x 20 SKU: 622209220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-92-x-20-sku-622209220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,2 x 12 SKU: 622209212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-92-x-12-sku-622209212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9 x 20 SKU: 62220920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-9-x-20-sku-62220920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,1 x 25 SKU: 622209125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-91-x-25-sku-622209125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,1 x 20 SKU: 622209120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-91-x-20-sku-622209120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9 x 12 SKU: 62220912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-9-x-12-sku-62220912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 9,1 x 12 SKU: 622209112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-91-x-12-sku-622209112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,9 x 25 SKU: 622208925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-89-x-25-sku-622208925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,9 x 20 SKU: 622208920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-89-x-20-sku-622208920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,9 x 12 SKU: 622208912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-89-x-12-sku-622208912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,8 x 25 SKU: 622208825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-88-x-25-sku-622208825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,8 x 20 SKU: 622208820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-88-x-20-sku-622208820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,8 x 12 SKU: 622208812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-88-x-12-sku-622208812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,7 x 25 SKU: 622208725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-87-x-25-sku-622208725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,7 x 20 SKU: 622208720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-87-x-20-sku-622208720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,7 x 12 SKU: 622208712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-87-x-12-sku-622208712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,6 x 25 SKU: 622208625](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-86-x-25-sku-622208625/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,6 x 20 SKU: 622208620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-86-x-20-sku-622208620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,6 x 12 SKU: 622208612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-86-x-12-sku-622208612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,5 x 25 SKU: 622208525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-85-x-25-sku-622208525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,5 x 20 SKU: 622208520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-85-x-20-sku-622208520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,5 x 12 SKU: 622208512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-85-x-12-sku-622208512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,4 x 25 SKU: 622208425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-84-x-25-sku-622208425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,4 x 20 SKU: 622208420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-84-x-20-sku-622208420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,4 x 12 SKU: 622208412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-84-x-12-sku-622208412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,3 x 25 SKU: 622208325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-83-x-25-sku-622208325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,3 x 20 SKU: 622208320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-83-x-20-sku-622208320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,3 x 12 SKU: 622208312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-83-x-12-sku-622208312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,2 x 25 SKU: 622208225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-82-x-25-sku-622208225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,2 x 20 SKU: 622208220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-82-x-20-sku-622208220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,2 x 12 SKU: 622208212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-82-x-12-sku-622208212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8 x 20 SKU: 62220820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-8-x-20-sku-62220820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8 x 16 SKU: 62220816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-8-x-16-sku-62220816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,1 x 25 SKU: 622208125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-81-x-25-sku-622208125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,1 x 20 SKU: 622208120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-81-x-20-sku-622208120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8,1 x 12 SKU: 622208112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-81-x-12-sku-622208112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 8 x 10 SKU: 62220810](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-8-x-10-sku-62220810/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,9 x 20 SKU: 622207920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-79-x-20-sku-622207920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,9 x 16 SKU: 622207916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-79-x-16-sku-622207916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,9 x 10 SKU: 622207910](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-79-x-10-sku-622207910/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,8 x 20 SKU: 622207820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-78-x-20-sku-622207820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,8 x 16 SKU: 622207816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-78-x-16-sku-622207816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,8 x 10 SKU: 622207810](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-78-x-10-sku-622207810/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,7 x 20 SKU: 622207720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-77-x-20-sku-622207720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,7 x 16 SKU: 622207716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-77-x-16-sku-622207716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,7 x 10 SKU: 622207710](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-77-x-10-sku-622207710/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,6 x 20 SKU: 622207620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-76-x-20-sku-622207620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,6 x 16 SKU: 622207616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-76-x-16-sku-622207616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,6 x 10 SKU: 622207610](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-76-x-10-sku-622207610/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,5 x 20 SKU: 622207520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-75-x-20-sku-622207520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,5 x 16 SKU: 622207516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-75-x-16-sku-622207516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,5 x 10 SKU: 622207510](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-75-x-10-sku-622207510/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,4 x 20 SKU: 622207420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-74-x-20-sku-622207420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,4 x 16 SKU: 622207416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-74-x-16-sku-622207416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,4 x 10 SKU: 622207410](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-74-x-10-sku-622207410/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,3 x 20 SKU: 622207320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-73-x-20-sku-622207320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,3 x 16 SKU: 622207316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-73-x-16-sku-622207316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,3 x 10 SKU: 622207310](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-73-x-10-sku-622207310/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,2 x 20 SKU: 622207220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-72-x-20-sku-622207220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,2 x 16 SKU: 622207216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-72-x-16-sku-622207216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,2 x 10 SKU: 622207210](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-72-x-10-sku-622207210/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7 x 20 SKU: 62220720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-7-x-20-sku-62220720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7 x 16 SKU: 62220716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-7-x-16-sku-62220716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,1 x 20 SKU: 622207120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-71-x-20-sku-622207120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,1 x 16 SKU: 622207116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-71-x-16-sku-622207116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7,1 x 10 SKU: 622207110](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-71-x-10-sku-622207110/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 7 x 10 SKU: 62220710](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-7-x-10-sku-62220710/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 6,9 x 20 SKU: 622206920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-69-x-20-sku-622206920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 18 teeth material steel SKU: 12811800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-18-teeth-material-steel-sku-12811800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 17 teeth material steel SKU: 12811700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-17-teeth-material-steel-sku-12811700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 16 teeth material steel SKU: 12811600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-16-teeth-material-steel-sku-12811600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 15 teeth material steel SKU: 12811500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-15-teeth-material-steel-sku-12811500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 14 teeth material steel SKU: 12811400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-14-teeth-material-steel-sku-12811400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 13 teeth material steel SKU: 12811300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-13-teeth-material-steel-sku-12811300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 12 teeth material steel SKU: 12811200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-12-teeth-material-steel-sku-12811200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 11 teeth material steel SKU: 12811100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-11-teeth-material-steel-sku-12811100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 10 teeth material steel SKU: 12811000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-10-teeth-material-steel-sku-12811000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 9 teeth material steel SKU: 12810900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-9-teeth-material-steel-sku-12810900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 8 teeth material steel SKU: 12810800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-8-teeth-material-steel-sku-12810800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 12 B-2 3/4x7/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12799112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-12-b-2-3-4x7-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12799112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 10.8 mm, B2 = 30.3 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 25 teeth material steel teeth hardened SKU: 12788525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-25-teeth-material-steel-teeth-hardened-sku-12788525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 23 teeth material steel teeth hardened SKU: 12788523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-23-teeth-material-steel-teeth-hardened-sku-12788523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 21 teeth material steel teeth hardened SKU: 12788521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-21-teeth-material-steel-teeth-hardened-sku-12788521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 20 teeth material steel teeth hardened SKU: 12788520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-20-teeth-material-steel-teeth-hardened-sku-12788520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 19 teeth material steel teeth hardened SKU: 12788519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-19-teeth-material-steel-teeth-hardened-sku-12788519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 18 teeth material steel teeth hardened SKU: 12788518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-18-teeth-material-steel-teeth-hardened-sku-12788518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 17 teeth material steel teeth hardened SKU: 12788517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-17-teeth-material-steel-teeth-hardened-sku-12788517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 16 teeth material steel teeth hardened SKU: 12788516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-16-teeth-material-steel-teeth-hardened-sku-12788516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 15 teeth material steel teeth hardened SKU: 12788515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-15-teeth-material-steel-teeth-hardened-sku-12788515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 14 teeth material steel teeth hardened SKU: 12788514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-14-teeth-material-steel-teeth-hardened-sku-12788514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 13 teeth material steel teeth hardened SKU: 12788513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-13-teeth-material-steel-teeth-hardened-sku-12788513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 12 B-1 12 teeth material steel teeth hardened SKU: 12788512](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-12-b-1-12-teeth-material-steel-teeth-hardened-sku-12788512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 11,1 mm, B2 = 38 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 25 teeth material steel teeth hardened SKU: 12788425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-25-teeth-material-steel-teeth-hardened-sku-12788425/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 23 teeth material steel teeth hardened SKU: 12788423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-23-teeth-material-steel-teeth-hardened-sku-12788423/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 21 teeth material steel teeth hardened SKU: 12788421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-21-teeth-material-steel-teeth-hardened-sku-12788421/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 20 teeth material steel teeth hardened SKU: 12788420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-20-teeth-material-steel-teeth-hardened-sku-12788420/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 19 teeth material steel teeth hardened SKU: 12788419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-19-teeth-material-steel-teeth-hardened-sku-12788419/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 18 teeth material steel teeth hardened SKU: 12788418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-18-teeth-material-steel-teeth-hardened-sku-12788418/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 17 teeth material steel teeth hardened SKU: 12788417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-17-teeth-material-steel-teeth-hardened-sku-12788417/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 16 teeth material steel teeth hardened SKU: 12788416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-16-teeth-material-steel-teeth-hardened-sku-12788416/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 15 teeth material steel teeth hardened SKU: 12788415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-15-teeth-material-steel-teeth-hardened-sku-12788415/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 14 teeth material steel teeth hardened SKU: 12788414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-14-teeth-material-steel-teeth-hardened-sku-12788414/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 13 teeth material steel teeth hardened SKU: 12788413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-13-teeth-material-steel-teeth-hardened-sku-12788413/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 12 B-1 12 teeth material steel teeth hardened SKU: 12788412](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-12-b-1-12-teeth-material-steel-teeth-hardened-sku-12788412/): Material: Steel C45, not hardened. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 3/4 x 7/16" General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 38 teeth material steel teeth induction hardened SKU: 12788138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-38-teeth-material-steel-teeth-induction-hardened-sku-12788138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 32 teeth material steel teeth induction hardened SKU: 12788132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-32-teeth-material-steel-teeth-induction-hardened-sku-12788132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 30 teeth material steel teeth induction hardened SKU: 12788130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-30-teeth-material-steel-teeth-induction-hardened-sku-12788130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 25 teeth material steel teeth induction hardened SKU: 12788125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-25-teeth-material-steel-teeth-induction-hardened-sku-12788125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 24 teeth material steel teeth induction hardened SKU: 12788124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-24-teeth-material-steel-teeth-induction-hardened-sku-12788124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 23 teeth material steel teeth induction hardened SKU: 12788123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-23-teeth-material-steel-teeth-induction-hardened-sku-12788123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 22 teeth material steel teeth induction hardened SKU: 12788122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-22-teeth-material-steel-teeth-induction-hardened-sku-12788122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 21 teeth material steel teeth induction hardened SKU: 12788121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-21-teeth-material-steel-teeth-induction-hardened-sku-12788121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 20 teeth material steel teeth induction hardened SKU: 12788120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-20-teeth-material-steel-teeth-induction-hardened-sku-12788120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 19 teeth material steel teeth induction hardened SKU: 12788119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-19-teeth-material-steel-teeth-induction-hardened-sku-12788119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 18 teeth material steel teeth induction hardened SKU: 12788118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-18-teeth-material-steel-teeth-induction-hardened-sku-12788118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 17 teeth material steel teeth induction hardened SKU: 12788117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-17-teeth-material-steel-teeth-induction-hardened-sku-12788117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 16 teeth material steel teeth induction hardened SKU: 12788116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-16-teeth-material-steel-teeth-induction-hardened-sku-12788116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 15 teeth material steel teeth induction hardened SKU: 12788115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-15-teeth-material-steel-teeth-induction-hardened-sku-12788115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 14 teeth material steel teeth induction hardened SKU: 12788114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-14-teeth-material-steel-teeth-induction-hardened-sku-12788114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 13 teeth material steel teeth induction hardened SKU: 12788113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-13-teeth-material-steel-teeth-induction-hardened-sku-12788113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 12 teeth material steel teeth induction hardened SKU: 12788112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-12-teeth-material-steel-teeth-induction-hardened-sku-12788112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 11 teeth material steel teeth induction hardened SKU: 12788111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-11-teeth-material-steel-teeth-induction-hardened-sku-12788111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 10 teeth material steel teeth induction hardened SKU: 12788110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-10-teeth-material-steel-teeth-induction-hardened-sku-12788110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 9 teeth material steel teeth induction hardened SKU: 12788109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-9-teeth-material-steel-teeth-induction-hardened-sku-12788109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 12 B-2 3/4x7/16" 8 teeth material steel teeth induction hardened SKU: 12788108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-12-b-2-3-4x7-16-8-teeth-material-steel-teeth-induction-hardened-sku-12788108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 10,8 mm, B2 = 30,3 mm, c = 2 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 12 B-2 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782540](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782540/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782535](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782535/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782440](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782440/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782435](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782435/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782430](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782430/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782345](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782345/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782340](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782340/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782335](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782335/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782240](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782240/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782235](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782235/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782230](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782230/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782145](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782145/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782140](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782140/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782135](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782135/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782040](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782040/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12782025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12782025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781940](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781940/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781935](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781935/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781930](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781930/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781840](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781840/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781835](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781835/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781830](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781830/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781740](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781740/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781735](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781735/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781730](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781730/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 12 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12781725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-12-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12781725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [drill bushing (guide bushing) similar DIN 179 - A 13,6 x 16 SKU: 622213616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-136-x-16-sku-622213616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,5 x 36 SKU: 622213536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-135-x-36-sku-622213536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,5 x 28 SKU: 622213528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-135-x-28-sku-622213528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,5 x 16 SKU: 622213516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-135-x-16-sku-622213516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,4 x 36 SKU: 622213436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-134-x-36-sku-622213436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,4 x 28 SKU: 622213428](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-134-x-28-sku-622213428/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,4 x 16 SKU: 622213416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-134-x-16-sku-622213416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13 x 36 SKU: 62221336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-13-x-36-sku-62221336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,3 x 36 SKU: 622213336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-133-x-36-sku-622213336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,3 x 28 SKU: 622213328](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-133-x-28-sku-622213328/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,3 x 16 SKU: 622213316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-133-x-16-sku-622213316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13 x 28 SKU: 62221328](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-13-x-28-sku-62221328/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,2 x 36 SKU: 622213236](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-132-x-36-sku-622213236/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,2 x 28 SKU: 622213228](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-132-x-28-sku-622213228/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,2 x 16 SKU: 622213216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-132-x-16-sku-622213216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13 x 16 SKU: 62221316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-13-x-16-sku-62221316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,1 x 36 SKU: 622213136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-131-x-36-sku-622213136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,1 x 28 SKU: 622213128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-131-x-28-sku-622213128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,1 x 16 SKU: 622213116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-131-x-16-sku-622213116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,9 x 36 SKU: 622212936](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-129-x-36-sku-622212936/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,9 x 28 SKU: 622212928](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-129-x-28-sku-622212928/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,9 x 16 SKU: 622212916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-129-x-16-sku-622212916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,8 x 36 SKU: 622212836](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-128-x-36-sku-622212836/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,8 x 28 SKU: 622212828](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-128-x-28-sku-622212828/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,8 x 16 SKU: 622212816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-128-x-16-sku-622212816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,7 x 36 SKU: 622212736](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-127-x-36-sku-622212736/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,7 x 28 SKU: 622212728](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-127-x-28-sku-622212728/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,7 x 16 SKU: 622212716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-127-x-16-sku-622212716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,6 x 36 SKU: 622212636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-126-x-36-sku-622212636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,6 x 28 SKU: 622212628](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-126-x-28-sku-622212628/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,6 x 16 SKU: 622212616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-126-x-16-sku-622212616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,5 x 36 SKU: 622212536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-125-x-36-sku-622212536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,5 x 28 SKU: 622212528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-125-x-28-sku-622212528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,5 x 16 SKU: 622212516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-125-x-16-sku-622212516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,4 x 36 SKU: 622212436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-124-x-36-sku-622212436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,4 x 28 SKU: 622212428](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-124-x-28-sku-622212428/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,4 x 16 SKU: 622212416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-124-x-16-sku-622212416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,3 x 36 SKU: 622212336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-123-x-36-sku-622212336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,3 x 28 SKU: 622212328](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-123-x-28-sku-622212328/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,3 x 16 SKU: 622212316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-123-x-16-sku-622212316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12 x 25 SKU: 62221225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-12-x-25-sku-62221225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,2 x 36 SKU: 622212236](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-122-x-36-sku-622212236/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,2 x 28 SKU: 622212228](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-122-x-28-sku-622212228/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,2 x 16 SKU: 622212216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-122-x-16-sku-622212216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12 x 20 SKU: 62221220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-12-x-20-sku-62221220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,1 x 36 SKU: 622212136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-121-x-36-sku-622212136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,1 x 28 SKU: 622212128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-121-x-28-sku-622212128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12 x 12 SKU: 62221212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-12-x-12-sku-62221212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 12,1 x 16 SKU: 622212116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-121-x-16-sku-622212116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,9 x 25 SKU: 622211925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-119-x-25-sku-622211925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,9 x 20 SKU: 622211920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-119-x-20-sku-622211920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,9 x 12 SKU: 622211912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-119-x-12-sku-622211912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,8 x 25 SKU: 622211825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-118-x-25-sku-622211825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,8 x 20 SKU: 622211820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-118-x-20-sku-622211820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,8 x 12 SKU: 622211812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-118-x-12-sku-622211812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,7 x 25 SKU: 622211725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-117-x-25-sku-622211725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,7 x 20 SKU: 622211720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-117-x-20-sku-622211720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,7 x 12 SKU: 622211712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-117-x-12-sku-622211712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,6 x 25 SKU: 622211625](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-116-x-25-sku-622211625/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,6 x 20 SKU: 622211620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-116-x-20-sku-622211620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,6 x 12 SKU: 622211612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-116-x-12-sku-622211612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,5 x 25 SKU: 622211525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-115-x-25-sku-622211525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,5 x 20 SKU: 622211520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-115-x-20-sku-622211520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,5 x 12 SKU: 622211512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-115-x-12-sku-622211512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,4 x 25 SKU: 622211425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-114-x-25-sku-622211425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,4 x 20 SKU: 622211420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-114-x-20-sku-622211420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,4 x 12 SKU: 622211412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-114-x-12-sku-622211412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,3 x 25 SKU: 622211325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-113-x-25-sku-622211325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,3 x 20 SKU: 622211320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-113-x-20-sku-622211320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,3 x 12 SKU: 622211312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-113-x-12-sku-622211312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11 x 25 SKU: 62221125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-11-x-25-sku-62221125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,2 x 25 SKU: 622211225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-112-x-25-sku-622211225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,2 x 20 SKU: 622211220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-112-x-20-sku-622211220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,2 x 12 SKU: 622211212](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-112-x-12-sku-622211212/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11 x 20 SKU: 62221120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-11-x-20-sku-62221120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,1 x 25 SKU: 622211125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-111-x-25-sku-622211125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,1 x 20 SKU: 622211120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-111-x-20-sku-622211120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11 x 12 SKU: 62221112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-11-x-12-sku-62221112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 11,1 x 12 SKU: 622211112](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-111-x-12-sku-622211112/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,9 x 25 SKU: 622210925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-109-x-25-sku-622210925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,9 x 20 SKU: 622210920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-109-x-20-sku-622210920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,9 x 12 SKU: 622210912](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-109-x-12-sku-622210912/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,8 x 25 SKU: 622210825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-108-x-25-sku-622210825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,8 x 20 SKU: 622210820](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-108-x-20-sku-622210820/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,8 x 12 SKU: 622210812](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-108-x-12-sku-622210812/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,7 x 25 SKU: 622210725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-107-x-25-sku-622210725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,7 x 20 SKU: 622210720](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-107-x-20-sku-622210720/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,7 x 12 SKU: 622210712](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-107-x-12-sku-622210712/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,6 x 25 SKU: 622210625](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-106-x-25-sku-622210625/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,6 x 20 SKU: 622210620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-106-x-20-sku-622210620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,6 x 12 SKU: 622210612](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-106-x-12-sku-622210612/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,5 x 25 SKU: 622210525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-105-x-25-sku-622210525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,5 x 20 SKU: 622210520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-105-x-20-sku-622210520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,5 x 12 SKU: 622210512](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-105-x-12-sku-622210512/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,4 x 25 SKU: 622210425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-104-x-25-sku-622210425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,4 x 20 SKU: 622210420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-104-x-20-sku-622210420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,4 x 12 SKU: 622210412](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-104-x-12-sku-622210412/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,3 x 25 SKU: 622210325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-103-x-25-sku-622210325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,3 x 20 SKU: 622210320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-103-x-20-sku-622210320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 10,3 x 12 SKU: 622210312](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-103-x-12-sku-622210312/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Double sprocket ZREG for 2 single roller chains 16 B-1 19 teeth material steel teeth hardened SKU: 12888419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-19-teeth-material-steel-teeth-hardened-sku-12888419/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 18 teeth material steel teeth hardened SKU: 12888418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-18-teeth-material-steel-teeth-hardened-sku-12888418/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 17 teeth material steel teeth hardened SKU: 12888417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-17-teeth-material-steel-teeth-hardened-sku-12888417/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 16 teeth material steel teeth hardened SKU: 12888416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-16-teeth-material-steel-teeth-hardened-sku-12888416/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 15 teeth material steel teeth hardened SKU: 12888415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-15-teeth-material-steel-teeth-hardened-sku-12888415/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 14 teeth material steel teeth hardened SKU: 12888414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-14-teeth-material-steel-teeth-hardened-sku-12888414/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 13 teeth material steel teeth hardened SKU: 12888413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-13-teeth-material-steel-teeth-hardened-sku-12888413/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 12 teeth material steel teeth hardened SKU: 12888412](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-12-teeth-material-steel-teeth-hardened-sku-12888412/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 30 teeth material steel teeth induction hardened SKU: 12888130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-30-teeth-material-steel-teeth-induction-hardened-sku-12888130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 25 teeth material steel teeth induction hardened SKU: 12888125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-25-teeth-material-steel-teeth-induction-hardened-sku-12888125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 23 teeth material steel teeth induction hardened SKU: 12888123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-23-teeth-material-steel-teeth-induction-hardened-sku-12888123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 21 teeth material steel teeth induction hardened SKU: 12888121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-21-teeth-material-steel-teeth-induction-hardened-sku-12888121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 20 teeth material steel teeth induction hardened SKU: 12888120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-20-teeth-material-steel-teeth-induction-hardened-sku-12888120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 19 teeth material steel teeth induction hardened SKU: 12888119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-19-teeth-material-steel-teeth-induction-hardened-sku-12888119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 18 teeth material steel teeth induction hardened SKU: 12888118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-18-teeth-material-steel-teeth-induction-hardened-sku-12888118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 17 teeth material steel teeth induction hardened SKU: 12888117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-17-teeth-material-steel-teeth-induction-hardened-sku-12888117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 16 teeth material steel teeth induction hardened SKU: 12888116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-16-teeth-material-steel-teeth-induction-hardened-sku-12888116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 15 teeth material steel teeth induction hardened SKU: 12888115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-15-teeth-material-steel-teeth-induction-hardened-sku-12888115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 14 teeth material steel teeth induction hardened SKU: 12888114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-14-teeth-material-steel-teeth-induction-hardened-sku-12888114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 13 teeth material steel teeth induction hardened SKU: 12888113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-13-teeth-material-steel-teeth-induction-hardened-sku-12888113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 12 teeth material steel teeth induction hardened SKU: 12888112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-12-teeth-material-steel-teeth-induction-hardened-sku-12888112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 11 teeth material steel teeth induction hardened SKU: 12888111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-11-teeth-material-steel-teeth-induction-hardened-sku-12888111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 10 teeth material steel teeth induction hardened SKU: 12888110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-10-teeth-material-steel-teeth-induction-hardened-sku-12888110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 9 teeth material steel teeth induction hardened SKU: 12888109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-9-teeth-material-steel-teeth-induction-hardened-sku-12888109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 16 B-2 1"x17.02mm 8 teeth material steel teeth induction hardened SKU: 12888108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-16-b-2-1x17-02mm-8-teeth-material-steel-teeth-induction-hardened-sku-12888108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double sprocket ZRET for 2 single roller chains 16 B-1 25 teeth material steel for taper-bush 3525 SKU: 12877425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-25-teeth-material-steel-for-taper-bush-3525-sku-12877425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 23 teeth material steel for taper-bush 3525 SKU: 12877423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-23-teeth-material-steel-for-taper-bush-3525-sku-12877423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 21 teeth material steel for taper-bush 3020 SKU: 12877421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-21-teeth-material-steel-for-taper-bush-3020-sku-12877421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 20 teeth material steel for taper-bush 3020 SKU: 12877420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-20-teeth-material-steel-for-taper-bush-3020-sku-12877420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 19 teeth material steel for taper-bush 2517 SKU: 12877419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-19-teeth-material-steel-for-taper-bush-2517-sku-12877419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 18 teeth material steel for taper-bush 2517 SKU: 12877418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-18-teeth-material-steel-for-taper-bush-2517-sku-12877418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 17 teeth material steel for taper-bush 2517 SKU: 12877417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-17-teeth-material-steel-for-taper-bush-2517-sku-12877417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 16 teeth material steel for taper-bush 2012 SKU: 12877416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-16-teeth-material-steel-for-taper-bush-2012-sku-12877416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 15 teeth material steel for taper-bush 2012 SKU: 12877415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-15-teeth-material-steel-for-taper-bush-2012-sku-12877415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 14 teeth material steel for taper-bush 2012 SKU: 12877414](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-14-teeth-material-steel-for-taper-bush-2012-sku-12877414/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 13 teeth material steel for taper-bush 1615 SKU: 12877413](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-13-teeth-material-steel-for-taper-bush-1615-sku-12877413/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 16 B-1 12 teeth material steel for taper-bush 1615 SKU: 12877412](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-16-b-1-12-teeth-material-steel-for-taper-bush-1615-sku-12877412/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 114 teeth material cast iron for taper bush type 4040 SKU: 12877188G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-114-teeth-material-cast-iron-for-taper-bush-type-4040-sku-12877188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 95 teeth material cast iron for taper bush type 4040 SKU: 12877183G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-95-teeth-material-cast-iron-for-taper-bush-type-4040-sku-12877183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 76 teeth material cast iron for taper bush type 3535 SKU: 12877176G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-76-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12877176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 76 teeth material steel for taper bush type 3525 SKU: 12877176](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-76-teeth-material-steel-for-taper-bush-type-3525-sku-12877176/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 57 teeth material cast iron for taper bush type 3535 SKU: 12877157G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-57-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12877157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 57 teeth material steel for taper bush type 3525 SKU: 12877157](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-57-teeth-material-steel-for-taper-bush-type-3525-sku-12877157/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 45 teeth material cast iron for taper bush type 3030 SKU: 12877145G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-45-teeth-material-cast-iron-for-taper-bush-type-3030-sku-12877145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 45 teeth material steel for taper bush type 3020 SKU: 12877145](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-45-teeth-material-steel-for-taper-bush-type-3020-sku-12877145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 38 teeth material cast iron for taper bush type 3030 SKU: 12877138G](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-38-teeth-material-cast-iron-for-taper-bush-type-3030-sku-12877138g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 38 teeth material steel for taper bush type 3020 SKU: 12877138](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-38-teeth-material-steel-for-taper-bush-type-3020-sku-12877138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 30 teeth material steel for taper bush type 3020 SKU: 12877130](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-30-teeth-material-steel-for-taper-bush-type-3020-sku-12877130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 28 teeth material steel for taper bush type 3020 SKU: 12877128](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-28-teeth-material-steel-for-taper-bush-type-3020-sku-12877128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 27 teeth material steel for taper bush type 3020 SKU: 12877127](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-27-teeth-material-steel-for-taper-bush-type-3020-sku-12877127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 26 teeth material steel for taper bush type 3020 SKU: 12877126](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-26-teeth-material-steel-for-taper-bush-type-3020-sku-12877126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 25 teeth material steel for taper bush type 3020 SKU: 12877125](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-25-teeth-material-steel-for-taper-bush-type-3020-sku-12877125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 24 teeth material steel for taper bush type 3020 SKU: 12877124](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-24-teeth-material-steel-for-taper-bush-type-3020-sku-12877124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 23 teeth material steel for taper bush type 3020 SKU: 12877123](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-23-teeth-material-steel-for-taper-bush-type-3020-sku-12877123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 22 teeth material steel for taper bush type 3020 SKU: 12877122](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-22-teeth-material-steel-for-taper-bush-type-3020-sku-12877122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 21 teeth material steel for taper bush type 3020 SKU: 12877121](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-21-teeth-material-steel-for-taper-bush-type-3020-sku-12877121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 20 teeth material steel for taper bush type 2517 SKU: 12877120](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-20-teeth-material-steel-for-taper-bush-type-2517-sku-12877120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 19 teeth material steel for taper bush type 2517 SKU: 12877119](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-19-teeth-material-steel-for-taper-bush-type-2517-sku-12877119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 18 teeth material steel for taper bush type 2517 SKU: 12877118](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-18-teeth-material-steel-for-taper-bush-type-2517-sku-12877118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 17 teeth material steel for taper bush type 2517 SKU: 12877117](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-17-teeth-material-steel-for-taper-bush-type-2517-sku-12877117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 16 teeth material steel for taper bush type 2517 SKU: 12877116](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-16-teeth-material-steel-for-taper-bush-type-2517-sku-12877116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 15 teeth material steel for taper bush type 2012 SKU: 12877115](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-15-teeth-material-steel-for-taper-bush-type-2012-sku-12877115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 14 teeth material steel for taper bush type 1610 SKU: 12877114](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-14-teeth-material-steel-for-taper-bush-type-1610-sku-12877114/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 16 B-2 1"x17,02mm 13 teeth material steel for taper bush type 1610 SKU: 12877113](https://maedler.in/product/double-strand-sprocket-zrt-16-b-2-1x1702mm-13-teeth-material-steel-for-taper-bush-type-1610-sku-12877113/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 16,2 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 16 B-1 21 teeth material steel SKU: 12842100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-21-teeth-material-steel-sku-12842100/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 19 teeth material steel SKU: 12841900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-19-teeth-material-steel-sku-12841900/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 18 teeth material steel SKU: 12841800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-18-teeth-material-steel-sku-12841800/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 17 teeth material steel SKU: 12841700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-17-teeth-material-steel-sku-12841700/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 16 teeth material steel SKU: 12841600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-16-teeth-material-steel-sku-12841600/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 15 teeth material steel SKU: 12841500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-15-teeth-material-steel-sku-12841500/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 14 teeth material steel SKU: 12841400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-14-teeth-material-steel-sku-12841400/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 13 teeth material steel SKU: 12841300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-13-teeth-material-steel-sku-12841300/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 16 B-1 12 teeth material steel SKU: 12841200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-16-b-1-12-teeth-material-steel-sku-12841200/): Material: Steel C43, not hardened. Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 57 teeth material steel SKU: 12825700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-57-teeth-material-steel-sku-12825700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 48 teeth material steel SKU: 12824800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-48-teeth-material-steel-sku-12824800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 45 teeth material steel SKU: 12824500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-45-teeth-material-steel-sku-12824500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 38 teeth material steel SKU: 12823800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-38-teeth-material-steel-sku-12823800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 36 teeth material steel SKU: 12823600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-36-teeth-material-steel-sku-12823600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 35 teeth material steel SKU: 12823500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-35-teeth-material-steel-sku-12823500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 30 teeth material steel SKU: 12823000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-30-teeth-material-steel-sku-12823000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 27 teeth material steel SKU: 12822700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-27-teeth-material-steel-sku-12822700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 24 teeth material steel SKU: 12822400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-24-teeth-material-steel-sku-12822400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 22 teeth material steel SKU: 12822200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-22-teeth-material-steel-sku-12822200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 20 teeth material steel SKU: 12822000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-20-teeth-material-steel-sku-12822000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 18 teeth material steel SKU: 12821800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-18-teeth-material-steel-sku-12821800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 16 teeth material steel SKU: 12821600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-16-teeth-material-steel-sku-12821600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 14 teeth material steel SKU: 12821400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-14-teeth-material-steel-sku-12821400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 12 teeth material steel SKU: 12821200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-12-teeth-material-steel-sku-12821200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 16 B-2 1"x17.02mm 11 teeth material steel SKU: 12821100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-16-b-2-1x17-02mm-11-teeth-material-steel-sku-12821100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 76 teeth material cast iron SKU: 12817600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-76-teeth-material-cast-iron-sku-12817600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 57 teeth material cast iron SKU: 12815700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-57-teeth-material-cast-iron-sku-12815700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 45 teeth material cast iron SKU: 12814500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-45-teeth-material-cast-iron-sku-12814500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 38 teeth material cast iron SKU: 12813800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-38-teeth-material-cast-iron-sku-12813800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 30 teeth material steel SKU: 12813000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-30-teeth-material-steel-sku-12813000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 25 teeth material steel SKU: 12812500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-25-teeth-material-steel-sku-12812500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 24 teeth material steel SKU: 12812400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-24-teeth-material-steel-sku-12812400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 23 teeth material steel SKU: 12812300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-23-teeth-material-steel-sku-12812300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 21 teeth material steel SKU: 12812100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-21-teeth-material-steel-sku-12812100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 20 teeth material steel SKU: 12812000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-20-teeth-material-steel-sku-12812000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 16 B-2 1"x17.02mm 19 teeth material steel SKU: 12811900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-16-b-2-1x17-02mm-19-teeth-material-steel-sku-12811900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B2 = 47,7 mm c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [drill bushing (guide bushing) similar DIN 179 - A 23,5 x 36 SKU: 622223536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-235-x-36-sku-622223536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 23,5 x 20 SKU: 622223520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-235-x-20-sku-622223520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 23 x 45 SKU: 62222345](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-23-x-45-sku-62222345/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 23 x 36 SKU: 62222336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-23-x-36-sku-62222336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 23 x 20 SKU: 62222320](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-23-x-20-sku-62222320/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 22,5 x 45 SKU: 622222545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-225-x-45-sku-622222545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 22,5 x 36 SKU: 622222536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-225-x-36-sku-622222536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 22,5 x 20 SKU: 622222520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-225-x-20-sku-622222520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 22 x 45 SKU: 62222245](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-22-x-45-sku-62222245/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 22 x 36 SKU: 62222236](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-22-x-36-sku-62222236/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 22 x 20 SKU: 62222220](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-22-x-20-sku-62222220/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 21,5 x 45 SKU: 622221545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-215-x-45-sku-622221545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 21,5 x 36 SKU: 622221536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-215-x-36-sku-622221536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 21,5 x 20 SKU: 622221520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-215-x-20-sku-622221520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 21 x 45 SKU: 62222145](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-21-x-45-sku-62222145/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 21 x 36 SKU: 62222136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-21-x-36-sku-62222136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 21 x 20 SKU: 62222120](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-21-x-20-sku-62222120/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 20,5 x 45 SKU: 622220545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-205-x-45-sku-622220545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 20,5 x 36 SKU: 622220536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-205-x-36-sku-622220536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 20,5 x 20 SKU: 622220520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-205-x-20-sku-622220520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 20 x 45 SKU: 62222045](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-20-x-45-sku-62222045/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 20 x 36 SKU: 62222036](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-20-x-36-sku-62222036/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 20 x 20 SKU: 62222020](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-20-x-20-sku-62222020/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 19,5 x 45 SKU: 622219545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-195-x-45-sku-622219545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 19,5 x 36 SKU: 622219536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-195-x-36-sku-622219536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 19,5 x 20 SKU: 622219520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-195-x-20-sku-622219520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 19 x 45 SKU: 62221945](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-19-x-45-sku-62221945/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 19 x 36 SKU: 62221936](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-19-x-36-sku-62221936/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 19 x 20 SKU: 62221920](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-19-x-20-sku-62221920/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 18,5 x 45 SKU: 622218545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-185-x-45-sku-622218545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 18,5 x 36 SKU: 622218536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-185-x-36-sku-622218536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 18,5 x 20 SKU: 622218520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-185-x-20-sku-622218520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 18 x 36 SKU: 62221836](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-18-x-36-sku-62221836/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 18 x 28 SKU: 62221828](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-18-x-28-sku-62221828/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 18 x 16 SKU: 62221816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-18-x-16-sku-62221816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 17,5 x 36 SKU: 622217536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-175-x-36-sku-622217536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 17,5 x 28 SKU: 622217528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-175-x-28-sku-622217528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 17,5 x 16 SKU: 622217516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-175-x-16-sku-622217516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 17 x 36 SKU: 62221736](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-17-x-36-sku-62221736/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 17 x 28 SKU: 62221728](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-17-x-28-sku-62221728/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 17 x 16 SKU: 62221716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-17-x-16-sku-62221716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 16,5 x 36 SKU: 622216536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-165-x-36-sku-622216536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 16,5 x 28 SKU: 622216528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-165-x-28-sku-622216528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 16,5 x 16 SKU: 622216516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-165-x-16-sku-622216516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 16 x 36 SKU: 62221636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-16-x-36-sku-62221636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 16 x 28 SKU: 62221628](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-16-x-28-sku-62221628/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 16 x 16 SKU: 62221616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-16-x-16-sku-62221616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 16,1 x 36 SKU: 622216136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-161-x-36-sku-622216136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 16,1 x 28 SKU: 622216128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-161-x-28-sku-622216128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 16,1 x 16 SKU: 622216116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-161-x-16-sku-622216116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 15,5 x 36 SKU: 622215536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-155-x-36-sku-622215536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 15,5 x 28 SKU: 622215528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-155-x-28-sku-622215528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 15,5 x 16 SKU: 622215516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-155-x-16-sku-622215516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 15 x 36 SKU: 62221536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-15-x-36-sku-62221536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 15 x 28 SKU: 62221528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-15-x-28-sku-62221528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 15 x 16 SKU: 62221516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-15-x-16-sku-62221516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 15,1 x 36 SKU: 622215136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-151-x-36-sku-622215136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 15,1 x 28 SKU: 622215128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-151-x-28-sku-622215128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 15,1 x 16 SKU: 622215116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-151-x-16-sku-622215116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,9 x 36 SKU: 622214936](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-149-x-36-sku-622214936/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,9 x 28 SKU: 622214928](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-149-x-28-sku-622214928/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,9 x 16 SKU: 622214916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-149-x-16-sku-622214916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,8 x 36 SKU: 622214836](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-148-x-36-sku-622214836/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,8 x 28 SKU: 622214828](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-148-x-28-sku-622214828/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,8 x 16 SKU: 622214816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-148-x-16-sku-622214816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,7 x 36 SKU: 622214736](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-147-x-36-sku-622214736/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,7 x 28 SKU: 622214728](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-147-x-28-sku-622214728/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,7 x 16 SKU: 622214716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-147-x-16-sku-622214716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,6 x 36 SKU: 622214636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-146-x-36-sku-622214636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,6 x 28 SKU: 622214628](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-146-x-28-sku-622214628/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,6 x 16 SKU: 622214616](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-146-x-16-sku-622214616/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,5 x 36 SKU: 622214536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-145-x-36-sku-622214536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,5 x 28 SKU: 622214528](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-145-x-28-sku-622214528/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,5 x 16 SKU: 622214516](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-145-x-16-sku-622214516/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,4 x 36 SKU: 622214436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-144-x-36-sku-622214436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,4 x 28 SKU: 622214428](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-144-x-28-sku-622214428/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,4 x 16 SKU: 622214416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-144-x-16-sku-622214416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14 x 36 SKU: 62221436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-14-x-36-sku-62221436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,3 x 36 SKU: 622214336](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-143-x-36-sku-622214336/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,3 x 28 SKU: 622214328](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-143-x-28-sku-622214328/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,3 x 16 SKU: 622214316](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-143-x-16-sku-622214316/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14 x 28 SKU: 62221428](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-14-x-28-sku-62221428/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,2 x 36 SKU: 622214236](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-142-x-36-sku-622214236/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,2 x 28 SKU: 622214228](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-142-x-28-sku-622214228/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,2 x 16 SKU: 622214216](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-142-x-16-sku-622214216/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14 x 16 SKU: 62221416](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-14-x-16-sku-62221416/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,1 x 36 SKU: 622214136](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-141-x-36-sku-622214136/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,1 x 28 SKU: 622214128](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-141-x-28-sku-622214128/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 14,1 x 16 SKU: 622214116](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-141-x-16-sku-622214116/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,9 x 36 SKU: 622213936](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-139-x-36-sku-622213936/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,9 x 28 SKU: 622213928](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-139-x-28-sku-622213928/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,9 x 16 SKU: 622213916](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-139-x-16-sku-622213916/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,8 x 36 SKU: 622213836](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-138-x-36-sku-622213836/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,8 x 28 SKU: 622213828](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-138-x-28-sku-622213828/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,8 x 16 SKU: 622213816](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-138-x-16-sku-622213816/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,7 x 36 SKU: 622213736](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-137-x-36-sku-622213736/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,7 x 28 SKU: 622213728](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-137-x-28-sku-622213728/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,7 x 16 SKU: 622213716](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-137-x-16-sku-622213716/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,6 x 36 SKU: 622213636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-136-x-36-sku-622213636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 13,6 x 28 SKU: 622213628](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-136-x-28-sku-622213628/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 29 teeth material steel SKU: 13122900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-29-teeth-material-steel-sku-13122900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 28 teeth material steel SKU: 13122800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-28-teeth-material-steel-sku-13122800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 27 teeth material steel SKU: 13122700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-27-teeth-material-steel-sku-13122700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 26 teeth material steel SKU: 13122600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-26-teeth-material-steel-sku-13122600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 25 teeth material steel SKU: 13122500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-25-teeth-material-steel-sku-13122500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 24 teeth material steel SKU: 13122400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-24-teeth-material-steel-sku-13122400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 23 teeth material steel SKU: 13122300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-23-teeth-material-steel-sku-13122300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 22 teeth material steel SKU: 13122200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-22-teeth-material-steel-sku-13122200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 21 teeth material steel SKU: 13122100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-21-teeth-material-steel-sku-13122100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 20 teeth material steel SKU: 13122000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-20-teeth-material-steel-sku-13122000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 19 teeth material steel SKU: 13121900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-19-teeth-material-steel-sku-13121900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 18 teeth material steel SKU: 13121800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-18-teeth-material-steel-sku-13121800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 17 teeth material steel SKU: 13121700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-17-teeth-material-steel-sku-13121700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 16 teeth material steel SKU: 13121600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-16-teeth-material-steel-sku-13121600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 15 teeth material steel SKU: 13121500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-15-teeth-material-steel-sku-13121500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 14 teeth material steel SKU: 13121400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-14-teeth-material-steel-sku-13121400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 13 teeth material steel SKU: 13121300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-13-teeth-material-steel-sku-13121300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 12 teeth material steel SKU: 13121200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-12-teeth-material-steel-sku-13121200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 11 teeth material steel SKU: 13121100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-11-teeth-material-steel-sku-13121100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 8 teeth material steel SKU: 13120800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-8-teeth-material-steel-sku-13120800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 114 teeth material cast iron SKU: 13118800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-114-teeth-material-cast-iron-sku-13118800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 95 teeth material cast iron SKU: 13118300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-95-teeth-material-cast-iron-sku-13118300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 76 teeth material cast iron SKU: 13117600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-76-teeth-material-cast-iron-sku-13117600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 57 teeth material cast iron SKU: 13115700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-57-teeth-material-cast-iron-sku-13115700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 45 teeth material cast iron SKU: 13114500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-45-teeth-material-cast-iron-sku-13114500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 38 teeth material steel SKU: 13113800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-38-teeth-material-steel-sku-13113800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 35 teeth material steel SKU: 13113500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-35-teeth-material-steel-sku-13113500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 32 teeth material steel SKU: 13113200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-32-teeth-material-steel-sku-13113200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 30 teeth material steel SKU: 13113000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-30-teeth-material-steel-sku-13113000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 29 teeth material steel SKU: 13112900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-29-teeth-material-steel-sku-13112900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 28 teeth material steel SKU: 13112800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-28-teeth-material-steel-sku-13112800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 27 teeth material steel SKU: 13112700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-27-teeth-material-steel-sku-13112700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 26 teeth material steel SKU: 13112600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-26-teeth-material-steel-sku-13112600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 25 teeth material steel SKU: 13112500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-25-teeth-material-steel-sku-13112500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 24 teeth material steel SKU: 13112400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-24-teeth-material-steel-sku-13112400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 23 teeth material steel SKU: 13112300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-23-teeth-material-steel-sku-13112300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 22 teeth material steel SKU: 13112200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-22-teeth-material-steel-sku-13112200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 21 teeth material steel SKU: 13112100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-21-teeth-material-steel-sku-13112100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 20 teeth material steel SKU: 13112000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-20-teeth-material-steel-sku-13112000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 19 teeth material steel SKU: 13111900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-19-teeth-material-steel-sku-13111900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 18 teeth material steel SKU: 13111800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-18-teeth-material-steel-sku-13111800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 17 teeth material steel SKU: 13111700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-17-teeth-material-steel-sku-13111700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 16 teeth material steel SKU: 13111600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-16-teeth-material-steel-sku-13111600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 15 teeth material steel SKU: 13111500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-15-teeth-material-steel-sku-13111500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 14 teeth material steel SKU: 13111400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-14-teeth-material-steel-sku-13111400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 13 teeth material steel SKU: 13111300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-13-teeth-material-steel-sku-13111300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 12 teeth material steel SKU: 13111200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-12-teeth-material-steel-sku-13111200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 11 teeth material steel SKU: 13111100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-11-teeth-material-steel-sku-13111100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 10 teeth material steel SKU: 13111000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-10-teeth-material-steel-sku-13111000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 8 teeth material steel SKU: 13110800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-06-b-3-3-8x7-32-8-teeth-material-steel-sku-13110800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRT 24 B-2 1 1/2" x 1" 76 teeth material cast iron for taper bush type 4040 SKU: 12977576G](https://maedler.in/product/double-strand-sprocket-zrt-24-b-2-1-1-2-x-1-76-teeth-material-cast-iron-for-taper-bush-type-4040-sku-12977576g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 24 B-2 1 1/2" x 1" 57 teeth material cast iron for taper bush type 3535 SKU: 12977557G](https://maedler.in/product/double-strand-sprocket-zrt-24-b-2-1-1-2-x-1-57-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977557g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 24 B-2 1 1/2" x 1" 45 teeth material cast iron for taper bush type 3535 SKU: 12977545G](https://maedler.in/product/double-strand-sprocket-zrt-24-b-2-1-1-2-x-1-45-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977545g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 24 B-2 1 1/2" x 1" 38 teeth material cast iron for taper bush type 3535 SKU: 12977538G](https://maedler.in/product/double-strand-sprocket-zrt-24-b-2-1-1-2-x-1-38-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977538g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 20 B-2 1 1/4" x 3/4" 76 teeth material cast iron for taper bush type 3535 SKU: 12977176G](https://maedler.in/product/double-strand-sprocket-zrt-20-b-2-1-1-4-x-3-4-76-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977176g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 20 B-2 1 1/4" x 3/4" 57 teeth material cast iron for taper bush type 3535 SKU: 12977157G](https://maedler.in/product/double-strand-sprocket-zrt-20-b-2-1-1-4-x-3-4-57-teeth-material-cast-iron-for-taper-bush-type-3535-sku-12977157g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 20 B-2 1 1/4" x 3/4" 38 teeth material cast iron for taper bush type 3030 SKU: 12977138G](https://maedler.in/product/double-strand-sprocket-zrt-20-b-2-1-1-4-x-3-4-38-teeth-material-cast-iron-for-taper-bush-type-3030-sku-12977138g/): Material:: Grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 30 teeth material steel SKU: 12953000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-30-teeth-material-steel-sku-12953000/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 25 teeth material steel SKU: 12952500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-25-teeth-material-steel-sku-12952500/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 20 teeth material steel SKU: 12952000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-20-teeth-material-steel-sku-12952000/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 19 teeth material steel SKU: 12951900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-19-teeth-material-steel-sku-12951900/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 18 teeth material steel SKU: 12951800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-18-teeth-material-steel-sku-12951800/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 17 teeth material steel SKU: 12951700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-17-teeth-material-steel-sku-12951700/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 16 teeth material steel SKU: 12951600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-16-teeth-material-steel-sku-12951600/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 15 teeth material steel SKU: 12951500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-15-teeth-material-steel-sku-12951500/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 14 teeth material steel SKU: 12951400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-14-teeth-material-steel-sku-12951400/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 13 teeth material steel SKU: 12951300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-13-teeth-material-steel-sku-12951300/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 12 teeth material steel SKU: 12951200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-12-teeth-material-steel-sku-12951200/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 11 teeth material steel SKU: 12951100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-11-teeth-material-steel-sku-12951100/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 24 B-2 1 1/2x1" 10 teeth material steel SKU: 12951000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-24-b-2-1-1-2x1-10-teeth-material-steel-sku-12951000/): Material: Steel C45, not hardened. Sprocket with 30 teeth made from ST52 with welded hub.Pre-bored. General dimensions: B1 = 24,1 mm, B2 = 72,0 mm, c = 4 mm, r3 = 38 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 30 teeth material steel SKU: 12913000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-30-teeth-material-steel-sku-12913000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 26 teeth material steel SKU: 12912600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-26-teeth-material-steel-sku-12912600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 25 teeth material steel SKU: 12912500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-25-teeth-material-steel-sku-12912500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 21 teeth material steel SKU: 12912100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-21-teeth-material-steel-sku-12912100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 20 teeth material steel SKU: 12912000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-20-teeth-material-steel-sku-12912000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 19 teeth material steel SKU: 12911900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-19-teeth-material-steel-sku-12911900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 18 teeth material steel SKU: 12911800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-18-teeth-material-steel-sku-12911800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 17 teeth material steel SKU: 12911700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-17-teeth-material-steel-sku-12911700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 16 teeth material steel SKU: 12911600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-16-teeth-material-steel-sku-12911600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 15 teeth material steel SKU: 12911500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-15-teeth-material-steel-sku-12911500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 14 teeth material steel SKU: 12911400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-14-teeth-material-steel-sku-12911400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 13 teeth material steel SKU: 12911300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-13-teeth-material-steel-sku-12911300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 12 teeth material steel SKU: 12911200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-12-teeth-material-steel-sku-12911200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 11 teeth material steel SKU: 12911100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-11-teeth-material-steel-sku-12911100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 20 B-2 1 1/4x3/4" 10 teeth material steel SKU: 12911000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-20-b-2-1-1-4x3-4-10-teeth-material-steel-sku-12911000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 18,5 mm, B2 = 54,6 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 16 B-2 1"x17.02mm 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12899112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-16-b-2-1x17-02mm-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12899112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 15,8 mm, B2 = 47,7 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 21 teeth material steel teeth hardened SKU: 12888521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-21-teeth-material-steel-teeth-hardened-sku-12888521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 19 teeth material steel teeth hardened SKU: 12888519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-19-teeth-material-steel-teeth-hardened-sku-12888519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 18 teeth material steel teeth hardened SKU: 12888518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-18-teeth-material-steel-teeth-hardened-sku-12888518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 17 teeth material steel teeth hardened SKU: 12888517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-17-teeth-material-steel-teeth-hardened-sku-12888517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 16 teeth material steel teeth hardened SKU: 12888516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-16-teeth-material-steel-teeth-hardened-sku-12888516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 15 teeth material steel teeth hardened SKU: 12888515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-15-teeth-material-steel-teeth-hardened-sku-12888515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 14 teeth material steel teeth hardened SKU: 12888514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-14-teeth-material-steel-teeth-hardened-sku-12888514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 13 teeth material steel teeth hardened SKU: 12888513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-13-teeth-material-steel-teeth-hardened-sku-12888513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 16 B-1 12 teeth material steel teeth hardened SKU: 12888512](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-16-b-1-12-teeth-material-steel-teeth-hardened-sku-12888512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 16,2 mm, B2 = 58 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 16 B-1 21 teeth material steel teeth hardened SKU: 12888421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-16-b-1-21-teeth-material-steel-teeth-hardened-sku-12888421/): Material: Steel C45, teeth induction hardened (approx. 50 HRC). Pre-bored. Pitch 1" x 17,02 mm General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Bore-reducing bush diameter 10mm bore 8mm SKU: 62230810](https://maedler.in/product/bore-reducing-bush-diameter-10mm-bore-8mm-sku-62230810/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 12,7mm bore 6mm SKU: 62230612](https://maedler.in/product/bore-reducing-bush-diameter-127mm-bore-6mm-sku-62230612/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 10mm bore 6mm SKU: 62230610](https://maedler.in/product/bore-reducing-bush-diameter-10mm-bore-6mm-sku-62230610/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 12,7mm bore 5mm SKU: 62230512](https://maedler.in/product/bore-reducing-bush-diameter-127mm-bore-5mm-sku-62230512/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 10mm bore 5mm SKU: 62230510](https://maedler.in/product/bore-reducing-bush-diameter-10mm-bore-5mm-sku-62230510/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 10mm bore 4mm SKU: 62230410](https://maedler.in/product/bore-reducing-bush-diameter-10mm-bore-4mm-sku-62230410/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 5mm bore 4mm SKU: 62230405](https://maedler.in/product/bore-reducing-bush-diameter-5mm-bore-4mm-sku-62230405/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 5mm bore 3mm SKU: 62230305](https://maedler.in/product/bore-reducing-bush-diameter-5mm-bore-3mm-sku-62230305/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 5mm bore 2mm SKU: 62230205](https://maedler.in/product/bore-reducing-bush-diameter-5mm-bore-2mm-sku-62230205/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [drill bushing (guide bushing) similar DIN 179 - A 42 x 67 SKU: 62224267](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-42-x-67-sku-62224267/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 42 x 56 SKU: 62224256](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-42-x-56-sku-62224256/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 42 x 30 SKU: 62224230](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-42-x-30-sku-62224230/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 41 x 67 SKU: 62224167](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-41-x-67-sku-62224167/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 41 x 56 SKU: 62224156](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-41-x-56-sku-62224156/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 41 x 30 SKU: 62224130](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-41-x-30-sku-62224130/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 40 x 67 SKU: 62224067](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-40-x-67-sku-62224067/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 40 x 56 SKU: 62224056](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-40-x-56-sku-62224056/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 40 x 30 SKU: 62224030](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-40-x-30-sku-62224030/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 39 x 67 SKU: 62223967](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-39-x-67-sku-62223967/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 39 x 56 SKU: 62223956](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-39-x-56-sku-62223956/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 39 x 30 SKU: 62223930](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-39-x-30-sku-62223930/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 38 x 67 SKU: 62223867](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-38-x-67-sku-62223867/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 38 x 56 SKU: 62223856](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-38-x-56-sku-62223856/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 38 x 30 SKU: 62223830](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-38-x-30-sku-62223830/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 37 x 67 SKU: 62223767](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-37-x-67-sku-62223767/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 37 x 56 SKU: 62223756](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-37-x-56-sku-62223756/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 37 x 30 SKU: 62223730](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-37-x-30-sku-62223730/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 36 x 67 SKU: 62223667](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-36-x-67-sku-62223667/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 36 x 56 SKU: 62223656](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-36-x-56-sku-62223656/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 36 x 30 SKU: 62223630](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-36-x-30-sku-62223630/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 35 x 56 SKU: 62223556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-35-x-56-sku-62223556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 35 x 45 SKU: 62223545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-35-x-45-sku-62223545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 35 x 25 SKU: 62223525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-35-x-25-sku-62223525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 34 x 56 SKU: 62223456](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-34-x-56-sku-62223456/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 34,5 x 56 SKU: 622234556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-345-x-56-sku-622234556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 34,5 x 45 SKU: 622234545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-345-x-45-sku-622234545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 34,5 x 25 SKU: 622234525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-345-x-25-sku-622234525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 34 x 45 SKU: 62223445](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-34-x-45-sku-62223445/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 34 x 25 SKU: 62223425](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-34-x-25-sku-62223425/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 33 x 56 SKU: 62223356](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-33-x-56-sku-62223356/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 33,5 x 56 SKU: 622233556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-335-x-56-sku-622233556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 33,5 x 45 SKU: 622233545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-335-x-45-sku-622233545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 33,5 x 25 SKU: 622233525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-335-x-25-sku-622233525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 33 x 45 SKU: 62223345](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-33-x-45-sku-62223345/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 33 x 25 SKU: 62223325](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-33-x-25-sku-62223325/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 32 x 56 SKU: 62223256](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-32-x-56-sku-62223256/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 32,5 x 56 SKU: 622232556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-325-x-56-sku-622232556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 32,5 x 45 SKU: 622232545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-325-x-45-sku-622232545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 32,5 x 25 SKU: 622232525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-325-x-25-sku-622232525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 32 x 45 SKU: 62223245](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-32-x-45-sku-62223245/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 32 x 25 SKU: 62223225](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-32-x-25-sku-62223225/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 31 x 56 SKU: 62223156](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-31-x-56-sku-62223156/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 31,5 x 56 SKU: 622231556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-315-x-56-sku-622231556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 31,5 x 45 SKU: 622231545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-315-x-45-sku-622231545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 31,5 x 25 SKU: 622231525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-315-x-25-sku-622231525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 31 x 45 SKU: 62223145](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-31-x-45-sku-62223145/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 31 x 25 SKU: 62223125](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-31-x-25-sku-62223125/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 30 x 56 SKU: 62223056](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-30-x-56-sku-62223056/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 30,5 x 56 SKU: 622230556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-305-x-56-sku-622230556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 30,5 x 45 SKU: 622230545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-305-x-45-sku-622230545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 30,5 x 25 SKU: 622230525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-305-x-25-sku-622230525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 30 x 45 SKU: 62223045](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-30-x-45-sku-62223045/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 30 x 25 SKU: 62223025](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-30-x-25-sku-62223025/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 29 x 56 SKU: 62222956](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-29-x-56-sku-62222956/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 29,5 x 56 SKU: 622229556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-295-x-56-sku-622229556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 29,5 x 45 SKU: 622229545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-295-x-45-sku-622229545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 29,5 x 25 SKU: 622229525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-295-x-25-sku-622229525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 29 x 45 SKU: 62222945](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-29-x-45-sku-62222945/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 29 x 25 SKU: 62222925](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-29-x-25-sku-62222925/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 28 x 56 SKU: 62222856](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-28-x-56-sku-62222856/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 28,5 x 56 SKU: 622228556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-285-x-56-sku-622228556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 28,5 x 45 SKU: 622228545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-285-x-45-sku-622228545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 28,5 x 25 SKU: 622228525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-285-x-25-sku-622228525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 28 x 45 SKU: 62222845](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-28-x-45-sku-62222845/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 28 x 25 SKU: 62222825](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-28-x-25-sku-62222825/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 27 x 56 SKU: 62222756](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-27-x-56-sku-62222756/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 27,5 x 56 SKU: 622227556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-275-x-56-sku-622227556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 27,5 x 45 SKU: 622227545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-275-x-45-sku-622227545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 27,5 x 25 SKU: 622227525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-275-x-25-sku-622227525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 27 x 45 SKU: 62222745](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-27-x-45-sku-62222745/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 27 x 25 SKU: 62222725](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-27-x-25-sku-62222725/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 26,5 x 56 SKU: 622226556](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-265-x-56-sku-622226556/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 26,5 x 45 SKU: 622226545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-265-x-45-sku-622226545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 26,5 x 25 SKU: 622226525](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-265-x-25-sku-622226525/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 26 x 45 SKU: 62222645](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-26-x-45-sku-62222645/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 26 x 36 SKU: 62222636](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-26-x-36-sku-62222636/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 26 x 20 SKU: 62222620](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-26-x-20-sku-62222620/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 25,5 x 45 SKU: 622225545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-255-x-45-sku-622225545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 25,5 x 36 SKU: 622225536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-255-x-36-sku-622225536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 25,5 x 20 SKU: 622225520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-255-x-20-sku-622225520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 25 x 45 SKU: 62222545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-25-x-45-sku-62222545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 25 x 36 SKU: 62222536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-25-x-36-sku-62222536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 25 x 20 SKU: 62222520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-25-x-20-sku-62222520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 24,5 x 45 SKU: 622224545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-245-x-45-sku-622224545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 24,5 x 36 SKU: 622224536](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-245-x-36-sku-622224536/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 24,5 x 20 SKU: 622224520](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-245-x-20-sku-622224520/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 24 x 45 SKU: 62222445](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-24-x-45-sku-62222445/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 24 x 36 SKU: 62222436](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-24-x-36-sku-62222436/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 24 x 20 SKU: 62222420](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-24-x-20-sku-62222420/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [drill bushing (guide bushing) similar DIN 179 - A 23,5 x 45 SKU: 622223545](https://maedler.in/product/drill-bushing-guide-bushing-similar-din-179-a-235-x-45-sku-622223545/): Material: 1.0718. Hardened and precision machined to tolerance inside and outside. Cylindrical Drill Bushes similar to the old Standard DIN 179 A. Hardness: 62±2 HRC (700-800 HV10). Bore rounded at edge. Tolerances: Inner diameter F7. Outer diameter n6. Mounting hole: tolerance H7. Other dimensions and designs on request. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 21 teeth material steel SKU: 13612100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-21-teeth-material-steel-sku-13612100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 20 teeth material steel SKU: 13612000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-20-teeth-material-steel-sku-13612000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 19 teeth material steel SKU: 13611900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-19-teeth-material-steel-sku-13611900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 18 teeth material steel SKU: 13611800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-18-teeth-material-steel-sku-13611800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 17 teeth material steel SKU: 13611700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-17-teeth-material-steel-sku-13611700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 16 teeth material steel SKU: 13611600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-16-teeth-material-steel-sku-13611600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 15 teeth material steel SKU: 13611500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-15-teeth-material-steel-sku-13611500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 14 teeth material steel SKU: 13611400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-14-teeth-material-steel-sku-13611400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 13 teeth material steel SKU: 13611300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-13-teeth-material-steel-sku-13611300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 12 teeth material steel SKU: 13611200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-12-teeth-material-steel-sku-13611200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 11 teeth material steel SKU: 13611100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-11-teeth-material-steel-sku-13611100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 10 teeth material steel SKU: 13611000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-10-teeth-material-steel-sku-13611000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 8 teeth material steel SKU: 13610800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-8-teeth-material-steel-sku-13610800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 38 teeth material steel for taper bush type 2012 SKU: 13577138](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-38-teeth-material-steel-for-taper-bush-type-2012-sku-13577138/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 30 teeth material steel for taper bush type 2012 SKU: 13577130](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-30-teeth-material-steel-for-taper-bush-type-2012-sku-13577130/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 27 teeth material steel for taper bush type 2012 SKU: 13577127](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-27-teeth-material-steel-for-taper-bush-type-2012-sku-13577127/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 25 teeth material steel for taper bush type 2012 SKU: 13577125](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-25-teeth-material-steel-for-taper-bush-type-2012-sku-13577125/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 23 teeth material steel for taper bush type 1610 SKU: 13577123](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-23-teeth-material-steel-for-taper-bush-type-1610-sku-13577123/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 21 teeth material steel for taper bush type 1610 SKU: 13577121](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-21-teeth-material-steel-for-taper-bush-type-1610-sku-13577121/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 19 teeth material steel for taper bush type 1210 SKU: 13577119](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-19-teeth-material-steel-for-taper-bush-type-1210-sku-13577119/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 17 teeth material steel for taper bush type 1210 SKU: 13577117](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-17-teeth-material-steel-for-taper-bush-type-1210-sku-13577117/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 08 B-3 1/2x5/16" 15 teeth material steel for taper bush type 1008 SKU: 13577115](https://maedler.in/product/triple-strand-sprocket-drt-08-b-3-1-2x5-16-15-teeth-material-steel-for-taper-bush-type-1008-sku-13577115/): Material:: Steel C45, not hardened.General dimensions: B1 = 7,2 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 95 teeth material steel SKU: 13528300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-95-teeth-material-steel-sku-13528300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 76 teeth material steel SKU: 13527600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-76-teeth-material-steel-sku-13527600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 57 teeth material steel SKU: 13525700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-57-teeth-material-steel-sku-13525700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 54 teeth material steel SKU: 13525400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-54-teeth-material-steel-sku-13525400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 45 teeth material steel SKU: 13524500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-45-teeth-material-steel-sku-13524500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 40 teeth material steel SKU: 13524000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-40-teeth-material-steel-sku-13524000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 38 teeth material steel SKU: 13523800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-38-teeth-material-steel-sku-13523800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 36 teeth material steel SKU: 13523600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-36-teeth-material-steel-sku-13523600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 35 teeth material steel SKU: 13523500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-35-teeth-material-steel-sku-13523500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 33 teeth material steel SKU: 13523300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-33-teeth-material-steel-sku-13523300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 30 teeth material steel SKU: 13523000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-30-teeth-material-steel-sku-13523000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 29 teeth material steel SKU: 13522900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-29-teeth-material-steel-sku-13522900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 28 teeth material steel SKU: 13522800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-28-teeth-material-steel-sku-13522800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 27 teeth material steel SKU: 13522700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-27-teeth-material-steel-sku-13522700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 26 teeth material steel SKU: 13522600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-26-teeth-material-steel-sku-13522600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 25 teeth material steel SKU: 13522500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-25-teeth-material-steel-sku-13522500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 24 teeth material steel SKU: 13522400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-24-teeth-material-steel-sku-13522400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 23 teeth material steel SKU: 13522300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-23-teeth-material-steel-sku-13522300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 22 teeth material steel SKU: 13522200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-22-teeth-material-steel-sku-13522200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 21 teeth material steel SKU: 13522100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-21-teeth-material-steel-sku-13522100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 20 teeth material steel SKU: 13522000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-20-teeth-material-steel-sku-13522000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 19 teeth material steel SKU: 13521900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-19-teeth-material-steel-sku-13521900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 18 teeth material steel SKU: 13521800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-18-teeth-material-steel-sku-13521800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 17 teeth material steel SKU: 13521700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-17-teeth-material-steel-sku-13521700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 16 teeth material steel SKU: 13521600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-16-teeth-material-steel-sku-13521600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 15 teeth material steel SKU: 13521500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-15-teeth-material-steel-sku-13521500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 14 teeth material steel SKU: 13521400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-14-teeth-material-steel-sku-13521400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 13 teeth material steel SKU: 13521300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-13-teeth-material-steel-sku-13521300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 12 teeth material steel SKU: 13521200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-12-teeth-material-steel-sku-13521200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 11 teeth material steel SKU: 13521100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-11-teeth-material-steel-sku-13521100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 10 teeth material steel SKU: 13521000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-10-teeth-material-steel-sku-13521000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 8 teeth material steel SKU: 13520800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-08-b-3-1-2x5-16-8-teeth-material-steel-sku-13520800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 95 teeth material cast iron SKU: 13518300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-95-teeth-material-cast-iron-sku-13518300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 76 teeth material cast iron SKU: 13517600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-76-teeth-material-cast-iron-sku-13517600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 57 teeth material cast iron SKU: 13515700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-57-teeth-material-cast-iron-sku-13515700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 45 teeth material cast iron SKU: 13514500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-45-teeth-material-cast-iron-sku-13514500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 38 teeth material steel SKU: 13513800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-38-teeth-material-steel-sku-13513800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 36 teeth material steel SKU: 13513600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-36-teeth-material-steel-sku-13513600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 35 teeth material steel SKU: 13513500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-35-teeth-material-steel-sku-13513500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 30 teeth material steel SKU: 13513000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-30-teeth-material-steel-sku-13513000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 29 teeth material steel SKU: 13512900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-29-teeth-material-steel-sku-13512900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 28 teeth material steel SKU: 13512800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-28-teeth-material-steel-sku-13512800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 27 teeth material steel SKU: 13512700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-27-teeth-material-steel-sku-13512700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 26 teeth material steel SKU: 13512600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-26-teeth-material-steel-sku-13512600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 25 teeth material steel SKU: 13512500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-25-teeth-material-steel-sku-13512500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 24 teeth material steel SKU: 13512400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-24-teeth-material-steel-sku-13512400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 23 teeth material steel SKU: 13512300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-23-teeth-material-steel-sku-13512300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 22 teeth material steel SKU: 13512200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-22-teeth-material-steel-sku-13512200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 21 teeth material steel SKU: 13512100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-21-teeth-material-steel-sku-13512100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 20 teeth material steel SKU: 13512000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-20-teeth-material-steel-sku-13512000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 19 teeth material steel SKU: 13511900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-19-teeth-material-steel-sku-13511900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 18 teeth material steel SKU: 13511800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-18-teeth-material-steel-sku-13511800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 17 teeth material steel SKU: 13511700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-17-teeth-material-steel-sku-13511700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 16 teeth material steel SKU: 13511600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-16-teeth-material-steel-sku-13511600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 15 teeth material steel SKU: 13511500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-15-teeth-material-steel-sku-13511500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 14 teeth material steel SKU: 13511400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-14-teeth-material-steel-sku-13511400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 13 teeth material steel SKU: 13511300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-13-teeth-material-steel-sku-13511300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 12 teeth material steel SKU: 13511200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-12-teeth-material-steel-sku-13511200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 11 teeth material steel SKU: 13511100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-11-teeth-material-steel-sku-13511100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 10 teeth material steel SKU: 13511000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-10-teeth-material-steel-sku-13511000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 08 B-3 1/2x5/16" 8 teeth material steel SKU: 13510800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-08-b-3-1-2x5-16-8-teeth-material-steel-sku-13510800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B3 = 34,9 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 38 teeth material steel for taper bush type 1615 SKU: 13177138](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-38-teeth-material-steel-for-taper-bush-type-1615-sku-13177138/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 30 teeth material steel for taper bush type 1615 SKU: 13177130](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-30-teeth-material-steel-for-taper-bush-type-1615-sku-13177130/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 27 teeth material steel for taper bush type 1210 SKU: 13177127](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-27-teeth-material-steel-for-taper-bush-type-1210-sku-13177127/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 25 teeth material steel for taper bush type 1210 SKU: 13177125](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-25-teeth-material-steel-for-taper-bush-type-1210-sku-13177125/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 23 teeth material steel for taper bush type 1210 SKU: 13177123](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-23-teeth-material-steel-for-taper-bush-type-1210-sku-13177123/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 21 teeth material steel for taper bush type 1008 SKU: 13177121](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-21-teeth-material-steel-for-taper-bush-type-1008-sku-13177121/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 19 teeth material steel for taper bush type 1008 SKU: 13177119](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-19-teeth-material-steel-for-taper-bush-type-1008-sku-13177119/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 06 B-3 3/8x7/32" 17 teeth material steel for taper bush type 1008 SKU: 13177117](https://maedler.in/product/triple-strand-sprocket-drt-06-b-3-3-8x7-32-17-teeth-material-steel-for-taper-bush-type-1008-sku-13177117/): Material:: Steel C45, not hardened.General dimensions: B1 = 5,3 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 95 teeth material steel SKU: 13128300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-95-teeth-material-steel-sku-13128300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 76 teeth material steel SKU: 13127600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-76-teeth-material-steel-sku-13127600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 57 teeth material steel SKU: 13125700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-57-teeth-material-steel-sku-13125700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 48 teeth material steel SKU: 13124800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-48-teeth-material-steel-sku-13124800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 45 teeth material steel SKU: 13124500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-45-teeth-material-steel-sku-13124500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 42 teeth material steel SKU: 13124200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-42-teeth-material-steel-sku-13124200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 40 teeth material steel SKU: 13124000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-40-teeth-material-steel-sku-13124000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 38 teeth material steel SKU: 13123800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-38-teeth-material-steel-sku-13123800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 06 B-3 3/8x7/32" 30 teeth material steel SKU: 13123000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-06-b-3-3-8x7-32-30-teeth-material-steel-sku-13123000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,2 mm, B3 = 25,6 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Taper bush 2012 bore 25,4mm (1") keyway width 6,350mm keyway height 3,175mm (1/4"x1/8") SKU: 6225052540](https://maedler.in/product/taper-bush-2012-bore-254mm-1-keyway-width-6350mm-keyway-height-3175mm-1-4x1-8-sku-6225052540/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 25mm SKU: 62250525](https://maedler.in/product/taper-bush-2012-bore-25mm-sku-62250525/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 24mm SKU: 62250524](https://maedler.in/product/taper-bush-2012-bore-24mm-sku-62250524/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 22mm SKU: 62250522](https://maedler.in/product/taper-bush-2012-bore-22mm-sku-62250522/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 20mm SKU: 62250520](https://maedler.in/product/taper-bush-2012-bore-20mm-sku-62250520/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 19,05mm (3/4") keyway width 4,763mm keyway height 2,381mm (3/16"x3/32") SKU: 6225051905](https://maedler.in/product/taper-bush-2012-bore-1905mm-3-4-keyway-width-4763mm-keyway-height-2381mm-3-16x3-32-sku-6225051905/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 19mm SKU: 62250519](https://maedler.in/product/taper-bush-2012-bore-19mm-sku-62250519/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 18mm SKU: 62250518](https://maedler.in/product/taper-bush-2012-bore-18mm-sku-62250518/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 16mm SKU: 62250516](https://maedler.in/product/taper-bush-2012-bore-16mm-sku-62250516/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 15mm SKU: 62250515](https://maedler.in/product/taper-bush-2012-bore-15mm-sku-62250515/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 14mm SKU: 62250514](https://maedler.in/product/taper-bush-2012-bore-14mm-sku-62250514/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 12mm SKU: 62250512](https://maedler.in/product/taper-bush-2012-bore-12mm-sku-62250512/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 1610 bore 42mm SKU: 62250442](https://maedler.in/product/taper-bush-1610-bore-42mm-sku-62250442/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 40mm SKU: 62250440](https://maedler.in/product/taper-bush-1610-bore-40mm-sku-62250440/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 38mm SKU: 62250438](https://maedler.in/product/taper-bush-1610-bore-38mm-sku-62250438/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 35mm SKU: 62250435](https://maedler.in/product/taper-bush-1610-bore-35mm-sku-62250435/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 32mm SKU: 62250432](https://maedler.in/product/taper-bush-1610-bore-32mm-sku-62250432/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 30mm SKU: 62250430](https://maedler.in/product/taper-bush-1610-bore-30mm-sku-62250430/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 28,575mm (1 1/8") keyway width 7,938mm keyway height 3,175mm (5/16"x1/8") SKU: 6225042857](https://maedler.in/product/taper-bush-1610-bore-28575mm-1-1-8-keyway-width-7938mm-keyway-height-3175mm-5-16x1-8-sku-6225042857/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 28mm SKU: 62250428](https://maedler.in/product/taper-bush-1610-bore-28mm-sku-62250428/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 25,4mm (1") keyway width 6,350mm keyway height 3,175mm (1/4"x1/8") SKU: 6225042540](https://maedler.in/product/taper-bush-1610-bore-254mm-1-keyway-width-6350mm-keyway-height-3175mm-1-4x1-8-sku-6225042540/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 25mm SKU: 62250425](https://maedler.in/product/taper-bush-1610-bore-25mm-sku-62250425/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 24mm SKU: 62250424](https://maedler.in/product/taper-bush-1610-bore-24mm-sku-62250424/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 22,225mm (7/8") keyway width 6,35mm keyway height 3,175mm (1/4"x1/8") SKU: 6225042222](https://maedler.in/product/taper-bush-1610-bore-22225mm-7-8-keyway-width-635mm-keyway-height-3175mm-1-4x1-8-sku-6225042222/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 22mm SKU: 62250422](https://maedler.in/product/taper-bush-1610-bore-22mm-sku-62250422/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 20mm SKU: 62250420](https://maedler.in/product/taper-bush-1610-bore-20mm-sku-62250420/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 19,05mm (3/4") keyway width 4,763mm keyway height 2,381mm (3/16"x3/32") SKU: 6225041905](https://maedler.in/product/taper-bush-1610-bore-1905mm-3-4-keyway-width-4763mm-keyway-height-2381mm-3-16x3-32-sku-6225041905/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1610 bore 19mm SKU: 62250419](https://maedler.in/product/taper-bush-1610-bore-19mm-sku-62250419/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 18mm SKU: 62250418](https://maedler.in/product/taper-bush-1610-bore-18mm-sku-62250418/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 17mm SKU: 62250417](https://maedler.in/product/taper-bush-1610-bore-17mm-sku-62250417/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 16mm SKU: 62250416](https://maedler.in/product/taper-bush-1610-bore-16mm-sku-62250416/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 15mm SKU: 62250415](https://maedler.in/product/taper-bush-1610-bore-15mm-sku-62250415/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 14mm SKU: 62250414](https://maedler.in/product/taper-bush-1610-bore-14mm-sku-62250414/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 12,7mm (1/2") keyway width 3,175mm keyway height 1,588mm (1/8"x1/16") SKU: 6225041270](https://maedler.in/product/taper-bush-1610-bore-127mm-1-2-keyway-width-3175mm-keyway-height-1588mm-1-8x1-16-sku-6225041270/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1610 bore 12mm SKU: 62250412](https://maedler.in/product/taper-bush-1610-bore-12mm-sku-62250412/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Bolt 3/8" x 5/8" for Taper bush 1210 1610 and 1615 SKU: 62250399](https://maedler.in/product/bolt-3-8-x-5-8-for-taper-bush-1210-1610-and-1615-sku-62250399/): Material:Steel. Supply: One screw. Attention: Order quantity as needed. Up to size 3030, taper bushes have two screws, from 3525 three screws. Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1210 bore 32mm SKU: 62250332](https://maedler.in/product/taper-bush-1210-bore-32mm-sku-62250332/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 31,75mm (1 1/4") keyway width 7,938mm keyway height 3,175mm (5/16"x1/8") SKU: 6225033175](https://maedler.in/product/taper-bush-1210-bore-3175mm-1-1-4-keyway-width-7938mm-keyway-height-3175mm-5-16x1-8-sku-6225033175/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 30mm SKU: 62250330](https://maedler.in/product/taper-bush-1210-bore-30mm-sku-62250330/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 28mm SKU: 62250328](https://maedler.in/product/taper-bush-1210-bore-28mm-sku-62250328/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 25,4mm (1") keyway width 6,350mm keyway height 3,175mm (1/4"x1/8") SKU: 6225032540](https://maedler.in/product/taper-bush-1210-bore-254mm-1-keyway-width-6350mm-keyway-height-3175mm-1-4x1-8-sku-6225032540/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1210 bore 25mm SKU: 62250325](https://maedler.in/product/taper-bush-1210-bore-25mm-sku-62250325/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 24mm SKU: 62250324](https://maedler.in/product/taper-bush-1210-bore-24mm-sku-62250324/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 22mm SKU: 62250322](https://maedler.in/product/taper-bush-1210-bore-22mm-sku-62250322/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 20mm SKU: 62250320](https://maedler.in/product/taper-bush-1210-bore-20mm-sku-62250320/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 19,05mm (3/4") keyway width 4,763mm keyway height 2,381mm (3/16"x3/32") SKU: 6225031905](https://maedler.in/product/taper-bush-1210-bore-1905mm-3-4-keyway-width-4763mm-keyway-height-2381mm-3-16x3-32-sku-6225031905/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1210 bore 19mm SKU: 62250319](https://maedler.in/product/taper-bush-1210-bore-19mm-sku-62250319/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 18mm SKU: 62250318](https://maedler.in/product/taper-bush-1210-bore-18mm-sku-62250318/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 17mm SKU: 62250317](https://maedler.in/product/taper-bush-1210-bore-17mm-sku-62250317/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 16mm SKU: 62250316](https://maedler.in/product/taper-bush-1210-bore-16mm-sku-62250316/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 15mm SKU: 62250315](https://maedler.in/product/taper-bush-1210-bore-15mm-sku-62250315/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 14mm SKU: 62250314](https://maedler.in/product/taper-bush-1210-bore-14mm-sku-62250314/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 12,7mm (1/2") keyway width 3,175mm keyway height 1,588mm (1/8"x1/16") SKU: 6225031270](https://maedler.in/product/taper-bush-1210-bore-127mm-1-2-keyway-width-3175mm-keyway-height-1588mm-1-8x1-16-sku-6225031270/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1210 bore 12mm SKU: 62250312](https://maedler.in/product/taper-bush-1210-bore-12mm-sku-62250312/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 11mm SKU: 62250311](https://maedler.in/product/taper-bush-1210-bore-11mm-sku-62250311/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1210 bore 10mm SKU: 62250310](https://maedler.in/product/taper-bush-1210-bore-10mm-sku-62250310/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1108 bore 28mm shallow keyway depth 1.3mm SKU: 62250228](https://maedler.in/product/taper-bush-1108-bore-28mm-shallow-keyway-depth-1-3mm-sku-62250228/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 25,4mm (1") keyway width 6,350mm keyway height 3,175mm (1/4"x1/8") SKU: 6225022540](https://maedler.in/product/taper-bush-1108-bore-254mm-1-keyway-width-6350mm-keyway-height-3175mm-1-4x1-8-sku-6225022540/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1108 bore 25mm SKU: 62250225](https://maedler.in/product/taper-bush-1108-bore-25mm-sku-62250225/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 24mm SKU: 62250224](https://maedler.in/product/taper-bush-1108-bore-24mm-sku-62250224/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 22,225mm (7/8") keyway width 6,35mm keyway height 3,175mm (1/4"x1/8") SKU: 6225022222](https://maedler.in/product/taper-bush-1108-bore-22225mm-7-8-keyway-width-635mm-keyway-height-3175mm-1-4x1-8-sku-6225022222/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 22mm SKU: 62250222](https://maedler.in/product/taper-bush-1108-bore-22mm-sku-62250222/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 20mm SKU: 62250220](https://maedler.in/product/taper-bush-1108-bore-20mm-sku-62250220/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 19,05mm (3/4") keyway width 4,763mm keyway height 2,381mm (3/16"x3/32") SKU: 6225021905](https://maedler.in/product/taper-bush-1108-bore-1905mm-3-4-keyway-width-4763mm-keyway-height-2381mm-3-16x3-32-sku-6225021905/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1108 bore 19mm SKU: 62250219](https://maedler.in/product/taper-bush-1108-bore-19mm-sku-62250219/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 18mm SKU: 62250218](https://maedler.in/product/taper-bush-1108-bore-18mm-sku-62250218/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 17mm SKU: 62250217](https://maedler.in/product/taper-bush-1108-bore-17mm-sku-62250217/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 16mm SKU: 62250216](https://maedler.in/product/taper-bush-1108-bore-16mm-sku-62250216/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 15mm SKU: 62250215](https://maedler.in/product/taper-bush-1108-bore-15mm-sku-62250215/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 14mm SKU: 62250214](https://maedler.in/product/taper-bush-1108-bore-14mm-sku-62250214/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 12,7mm (1/2") keyway width 3,175mm keyway height 1,588mm (1/8"x1/16") SKU: 6225021270](https://maedler.in/product/taper-bush-1108-bore-127mm-1-2-keyway-width-3175mm-keyway-height-1588mm-1-8x1-16-sku-6225021270/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 12mm SKU: 62250212](https://maedler.in/product/taper-bush-1108-bore-12mm-sku-62250212/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 11mm SKU: 62250211](https://maedler.in/product/taper-bush-1108-bore-11mm-sku-62250211/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 10mm SKU: 62250210](https://maedler.in/product/taper-bush-1108-bore-10mm-sku-62250210/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Taper bush 1108 bore 9mm SKU: 62250209](https://maedler.in/product/taper-bush-1108-bore-9mm-sku-62250209/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 28 with shallow keyway 1.3mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3 mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 40 Nm; bore 24 mm: 62 Nm; bore 28: 71 Nm. - [Bolt 1/4" x 1/2" for Taper bush 1008 and 1108 SKU: 62250199](https://maedler.in/product/bolt-1-4-x-1-2-for-taper-bush-1008-and-1108-sku-62250199/): Material:Steel. Supply: One screw. Attention: Order quantity as needed. Up to size 3030, taper bushes have two screws, from 3525 three screws. Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1008 bore 25mm shallow keyway depth 1.3mm SKU: 62250125](https://maedler.in/product/taper-bush-1008-bore-25mm-shallow-keyway-depth-1-3mm-sku-62250125/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 24mm shallow keyway depth 1.3mm SKU: 62250124](https://maedler.in/product/taper-bush-1008-bore-24mm-shallow-keyway-depth-1-3mm-sku-62250124/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 22mm SKU: 62250122](https://maedler.in/product/taper-bush-1008-bore-22mm-sku-62250122/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 20mm SKU: 62250120](https://maedler.in/product/taper-bush-1008-bore-20mm-sku-62250120/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 19,05mm (3/4") keyway width 4,763mm keyway height 2,381mm (3/16"x3/32") SKU: 6225011905](https://maedler.in/product/taper-bush-1008-bore-1905mm-3-4-keyway-width-4763mm-keyway-height-2381mm-3-16x3-32-sku-6225011905/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 19mm SKU: 62250119](https://maedler.in/product/taper-bush-1008-bore-19mm-sku-62250119/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 18mm SKU: 62250118](https://maedler.in/product/taper-bush-1008-bore-18mm-sku-62250118/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 16mm SKU: 62250116](https://maedler.in/product/taper-bush-1008-bore-16mm-sku-62250116/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 15mm SKU: 62250115](https://maedler.in/product/taper-bush-1008-bore-15mm-sku-62250115/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 14mm SKU: 62250114](https://maedler.in/product/taper-bush-1008-bore-14mm-sku-62250114/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 12,7mm (1/2") keyway width 3,175mm keyway height 1,588mm (1/8"x1/16") SKU: 6225011270](https://maedler.in/product/taper-bush-1008-bore-127mm-1-2-keyway-width-3175mm-keyway-height-1588mm-1-8x1-16-sku-6225011270/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1008 bore 12mm SKU: 62250112](https://maedler.in/product/taper-bush-1008-bore-12mm-sku-62250112/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 11mm SKU: 62250111](https://maedler.in/product/taper-bush-1008-bore-11mm-sku-62250111/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 10mm SKU: 62250110](https://maedler.in/product/taper-bush-1008-bore-10mm-sku-62250110/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Taper bush 1008 bore 9mm SKU: 62250109](https://maedler.in/product/taper-bush-1008-bore-9mm-sku-62250109/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (from bore 24 with shallow keyway 1.3 mm). Inch bores with feather keyways like British Standard (BS). Cone and front side ground. Thread BSW. Screws included in delivery (spare screw product no. 622 501 99, order quantity as needed). Thread BSW 1/4" x 1/2". Spanner size 3mm. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 5.6 Nm. Slip torque without keyway: bore 12 mm: 22 Nm; bore 19 mm: 37 Nm; bore 24 mm: 58 Nm - [Bore-reducing bush diameter 20mm bore 18mm SKU: 62231820](https://maedler.in/product/bore-reducing-bush-diameter-20mm-bore-18mm-sku-62231820/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 20mm bore 16mm SKU: 62231620](https://maedler.in/product/bore-reducing-bush-diameter-20mm-bore-16mm-sku-62231620/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 20mm bore 15mm SKU: 62231520](https://maedler.in/product/bore-reducing-bush-diameter-20mm-bore-15mm-sku-62231520/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 20mm bore 14mm SKU: 62231420](https://maedler.in/product/bore-reducing-bush-diameter-20mm-bore-14mm-sku-62231420/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 20mm bore 12mm SKU: 62231220](https://maedler.in/product/bore-reducing-bush-diameter-20mm-bore-12mm-sku-62231220/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 20mm bore 10mm SKU: 62231020](https://maedler.in/product/bore-reducing-bush-diameter-20mm-bore-10mm-sku-62231020/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 12,7mm bore 10mm SKU: 62231012](https://maedler.in/product/bore-reducing-bush-diameter-127mm-bore-10mm-sku-62231012/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 12,7mm bore 9mm SKU: 62230912](https://maedler.in/product/bore-reducing-bush-diameter-127mm-bore-9mm-sku-62230912/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Bore-reducing bush diameter 12,7mm bore 8mm SKU: 62230812](https://maedler.in/product/bore-reducing-bush-diameter-127mm-bore-8mm-sku-62230812/): Material: Product No. 622 302 05 up to 622 304 05 made from brass. Product No. 622 303 05 up to 622 318 20 made from aluminium. To guarantee an optimum shaft-hub connection, the bore-reducing bush should be used as follows: "S" indicates the adjusting screw inside the adjusting-screw hub."T" indicates tangential attachment screws for the clamping hub."F" indicates the recommended positioning of the flattened shaft with adjusting-screw hubs. Please note that concentricity and constant velocity can be influenced by mounted bushes. To achieve the best possible performance, we recommend using shafts of tolerance class h6. Undersized shafts are less effective. For the same reason we would not recommend using flattened shafts with more than 1/4 of the diameter removed. - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 27 teeth material steel for taper bush type 3020 SKU: 13777127](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-27-teeth-material-steel-for-taper-bush-type-3020-sku-13777127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 25 teeth material steel for taper bush type 2517 SKU: 13777125](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-25-teeth-material-steel-for-taper-bush-type-2517-sku-13777125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 23 teeth material steel for taper bush type 2517 SKU: 13777123](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-23-teeth-material-steel-for-taper-bush-type-2517-sku-13777123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 21 teeth material steel for taper bush type 2517 SKU: 13777121](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-21-teeth-material-steel-for-taper-bush-type-2517-sku-13777121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 19 teeth material steel for taper bush type 2012 SKU: 13777119](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-19-teeth-material-steel-for-taper-bush-type-2012-sku-13777119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 17 teeth material steel for taper bush type 2012 SKU: 13777117](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-17-teeth-material-steel-for-taper-bush-type-2012-sku-13777117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 15 teeth material steel for taper bush type 1615 SKU: 13777115](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-15-teeth-material-steel-for-taper-bush-type-1615-sku-13777115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 95 teeth material steel SKU: 13728300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-95-teeth-material-steel-sku-13728300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 76 teeth material steel SKU: 13727600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-76-teeth-material-steel-sku-13727600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 57 teeth material steel SKU: 13725700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-57-teeth-material-steel-sku-13725700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 50 teeth material steel SKU: 13725000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-50-teeth-material-steel-sku-13725000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 48 teeth material steel SKU: 13724800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-48-teeth-material-steel-sku-13724800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 45 teeth material steel SKU: 13724500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-45-teeth-material-steel-sku-13724500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 40 teeth material steel SKU: 13724000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-40-teeth-material-steel-sku-13724000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 38 teeth material steel SKU: 13723800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-38-teeth-material-steel-sku-13723800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 35 teeth material steel SKU: 13723500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-35-teeth-material-steel-sku-13723500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 30 teeth material steel SKU: 13723000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-30-teeth-material-steel-sku-13723000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 25 teeth material steel SKU: 13722500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-25-teeth-material-steel-sku-13722500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 22 teeth material steel SKU: 13722200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-22-teeth-material-steel-sku-13722200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 21 teeth material steel SKU: 13722100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-21-teeth-material-steel-sku-13722100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 20 teeth material steel SKU: 13722000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-20-teeth-material-steel-sku-13722000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 19 teeth material steel SKU: 13721900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-19-teeth-material-steel-sku-13721900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 18 teeth material steel SKU: 13721800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-18-teeth-material-steel-sku-13721800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 17 teeth material steel SKU: 13721700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-17-teeth-material-steel-sku-13721700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 16 teeth material steel SKU: 13721600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-16-teeth-material-steel-sku-13721600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 15 teeth material steel SKU: 13721500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-15-teeth-material-steel-sku-13721500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 14 teeth material steel SKU: 13721400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-14-teeth-material-steel-sku-13721400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 13 teeth material steel SKU: 13721300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-13-teeth-material-steel-sku-13721300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 12 teeth material steel SKU: 13721200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-12-teeth-material-steel-sku-13721200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 12 B-3 3/4x7/16" 11 teeth material steel SKU: 13721100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-12-b-3-3-4x7-16-11-teeth-material-steel-sku-13721100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 95 teeth material cast iron SKU: 13718300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-95-teeth-material-cast-iron-sku-13718300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 76 teeth material cast iron SKU: 13717600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-76-teeth-material-cast-iron-sku-13717600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 57 teeth material cast iron SKU: 13715700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-57-teeth-material-cast-iron-sku-13715700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 45 teeth material cast iron SKU: 13714500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-45-teeth-material-cast-iron-sku-13714500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 38 teeth material steel SKU: 13713800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-38-teeth-material-steel-sku-13713800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 30 teeth material steel SKU: 13713000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-30-teeth-material-steel-sku-13713000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 27 teeth material steel SKU: 13712700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-27-teeth-material-steel-sku-13712700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 25 teeth material steel SKU: 13712500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-25-teeth-material-steel-sku-13712500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 24 teeth material steel SKU: 13712400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-24-teeth-material-steel-sku-13712400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 23 teeth material steel SKU: 13712300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-23-teeth-material-steel-sku-13712300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 22 teeth material steel SKU: 13712200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-22-teeth-material-steel-sku-13712200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 21 teeth material steel SKU: 13712100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-21-teeth-material-steel-sku-13712100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 20 teeth material steel SKU: 13712000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-20-teeth-material-steel-sku-13712000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 19 teeth material steel SKU: 13711900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-19-teeth-material-steel-sku-13711900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 18 teeth material steel SKU: 13711800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-18-teeth-material-steel-sku-13711800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 17 teeth material steel SKU: 13711700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-17-teeth-material-steel-sku-13711700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 16 teeth material steel SKU: 13711600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-16-teeth-material-steel-sku-13711600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 15 teeth material steel SKU: 13711500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-15-teeth-material-steel-sku-13711500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 14 teeth material steel SKU: 13711400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-14-teeth-material-steel-sku-13711400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 13 teeth material steel SKU: 13711300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-13-teeth-material-steel-sku-13711300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 12 teeth material steel SKU: 13711200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-12-teeth-material-steel-sku-13711200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 11 teeth material steel SKU: 13711100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-11-teeth-material-steel-sku-13711100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 10 teeth material steel SKU: 13711000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-10-teeth-material-steel-sku-13711000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 8 teeth material steel SKU: 13710800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-12-b-3-3-4x7-16-8-teeth-material-steel-sku-13710800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 30 teeth material steel for taper bush type 2517 SKU: 13677130](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-30-teeth-material-steel-for-taper-bush-type-2517-sku-13677130/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 27 teeth material steel for taper bush type 2517 SKU: 13677127](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-27-teeth-material-steel-for-taper-bush-type-2517-sku-13677127/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 25 teeth material steel for taper bush type 2517 SKU: 13677125](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-25-teeth-material-steel-for-taper-bush-type-2517-sku-13677125/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 23 teeth material steel for taper bush type 2012 SKU: 13677123](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-23-teeth-material-steel-for-taper-bush-type-2012-sku-13677123/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 21 teeth material steel for taper bush type 1615 SKU: 13677121](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-21-teeth-material-steel-for-taper-bush-type-1615-sku-13677121/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 19 teeth material steel for taper bush type 1615 SKU: 13677119](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-19-teeth-material-steel-for-taper-bush-type-1615-sku-13677119/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 17 teeth material steel for taper bush type 1210 SKU: 13677117](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-17-teeth-material-steel-for-taper-bush-type-1210-sku-13677117/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 10 B-3 5/8x3/8" 15 teeth material steel for taper bush type 1210 SKU: 13677115](https://maedler.in/product/triple-strand-sprocket-drt-10-b-3-5-8x3-8-15-teeth-material-steel-for-taper-bush-type-1210-sku-13677115/): Material:: Steel C45, not hardened.General dimensions: B1 = 9,1 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 114 teeth material steel SKU: 13628800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-114-teeth-material-steel-sku-13628800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 95 teeth material steel SKU: 13628300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-95-teeth-material-steel-sku-13628300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 76 teeth material steel SKU: 13627600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-76-teeth-material-steel-sku-13627600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 57 teeth material steel SKU: 13625700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-57-teeth-material-steel-sku-13625700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 45 teeth material steel SKU: 13624500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-45-teeth-material-steel-sku-13624500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 38 teeth material steel SKU: 13623800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-38-teeth-material-steel-sku-13623800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 35 teeth material steel SKU: 13623500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-35-teeth-material-steel-sku-13623500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 30 teeth material steel SKU: 13623000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-30-teeth-material-steel-sku-13623000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 29 teeth material steel SKU: 13622900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-29-teeth-material-steel-sku-13622900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 28 teeth material steel SKU: 13622800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-28-teeth-material-steel-sku-13622800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 27 teeth material steel SKU: 13622700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-27-teeth-material-steel-sku-13622700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 25 teeth material steel SKU: 13622500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-25-teeth-material-steel-sku-13622500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 24 teeth material steel SKU: 13622400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-24-teeth-material-steel-sku-13622400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 23 teeth material steel SKU: 13622300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-23-teeth-material-steel-sku-13622300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 22 teeth material steel SKU: 13622200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-22-teeth-material-steel-sku-13622200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 21 teeth material steel SKU: 13622100](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-21-teeth-material-steel-sku-13622100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 20 teeth material steel SKU: 13622000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-20-teeth-material-steel-sku-13622000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 19 teeth material steel SKU: 13621900](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-19-teeth-material-steel-sku-13621900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 18 teeth material steel SKU: 13621800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-18-teeth-material-steel-sku-13621800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 17 teeth material steel SKU: 13621700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-17-teeth-material-steel-sku-13621700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 16 teeth material steel SKU: 13621600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-16-teeth-material-steel-sku-13621600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 15 teeth material steel SKU: 13621500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-15-teeth-material-steel-sku-13621500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 14 teeth material steel SKU: 13621400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-14-teeth-material-steel-sku-13621400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 13 teeth material steel SKU: 13621300](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-13-teeth-material-steel-sku-13621300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 12 teeth material steel SKU: 13621200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-12-teeth-material-steel-sku-13621200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 10 B-3 5/8x3/8" 8 teeth material steel SKU: 13620800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-10-b-3-5-8x3-8-8-teeth-material-steel-sku-13620800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 114 teeth material cast iron SKU: 13618800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-114-teeth-material-cast-iron-sku-13618800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 95 teeth material cast iron SKU: 13618300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-95-teeth-material-cast-iron-sku-13618300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 76 teeth material cast iron SKU: 13617600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-76-teeth-material-cast-iron-sku-13617600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 57 teeth material cast iron SKU: 13615700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-57-teeth-material-cast-iron-sku-13615700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 45 teeth material cast iron SKU: 13614500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-45-teeth-material-cast-iron-sku-13614500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 38 teeth material steel SKU: 13613800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-38-teeth-material-steel-sku-13613800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 30 teeth material steel SKU: 13613000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-30-teeth-material-steel-sku-13613000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 27 teeth material steel SKU: 13612700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-27-teeth-material-steel-sku-13612700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 25 teeth material steel SKU: 13612500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-25-teeth-material-steel-sku-13612500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 24 teeth material steel SKU: 13612400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-24-teeth-material-steel-sku-13612400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 23 teeth material steel SKU: 13612300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-23-teeth-material-steel-sku-13612300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 10 B-3 5/8x3/8" 22 teeth material steel SKU: 13612200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-10-b-3-5-8x3-8-22-teeth-material-steel-sku-13612200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9 mm, B3 = 42,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Taper-bush 3535 bore 48mm SKU: 62251048](https://maedler.in/product/taper-bush-3535-bore-48mm-sku-62251048/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 45mm SKU: 62251045](https://maedler.in/product/taper-bush-3535-bore-45mm-sku-62251045/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 42mm SKU: 62251042](https://maedler.in/product/taper-bush-3535-bore-42mm-sku-62251042/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 40mm SKU: 62251040](https://maedler.in/product/taper-bush-3535-bore-40mm-sku-62251040/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 38mm SKU: 62251038](https://maedler.in/product/taper-bush-3535-bore-38mm-sku-62251038/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 35mm SKU: 62251035](https://maedler.in/product/taper-bush-3535-bore-35mm-sku-62251035/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 30mm SKU: 62251030](https://maedler.in/product/taper-bush-3535-bore-30mm-sku-62251030/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 90mm SKU: 62250990](https://maedler.in/product/taper-bush-3525-bore-90mm-sku-62250990/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 85mm SKU: 62250985](https://maedler.in/product/taper-bush-3525-bore-85mm-sku-62250985/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3525 bore 80mm SKU: 62250980](https://maedler.in/product/taper-bush-3525-bore-80mm-sku-62250980/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-Spannbuchse 3525 Bohrung 75mm SKU: 62250975](https://maedler.in/product/taper-spannbuchse-3525-bohrung-75mm-sku-62250975/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 70mm SKU: 62250970](https://maedler.in/product/taper-bush-3525-bore-70mm-sku-62250970/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 65mm SKU: 62250965](https://maedler.in/product/taper-bush-3525-bore-65mm-sku-62250965/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3525 bore 60mm SKU: 62250960](https://maedler.in/product/taper-bush-3525-bore-60mm-sku-62250960/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 55mm SKU: 62250955](https://maedler.in/product/taper-bush-3525-bore-55mm-sku-62250955/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-Spannbuchse 3525 Bohrung 50mm SKU: 62250950](https://maedler.in/product/taper-spannbuchse-3525-bohrung-50mm-sku-62250950/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 48mm SKU: 62250948](https://maedler.in/product/taper-bush-3525-bore-48mm-sku-62250948/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 45mm SKU: 62250945](https://maedler.in/product/taper-bush-3525-bore-45mm-sku-62250945/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 42mm SKU: 62250942](https://maedler.in/product/taper-bush-3525-bore-42mm-sku-62250942/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3525 bore 40mm SKU: 62250940](https://maedler.in/product/taper-bush-3525-bore-40mm-sku-62250940/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 38mm SKU: 62250938](https://maedler.in/product/taper-bush-3525-bore-38mm-sku-62250938/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3525 bore 35mm SKU: 62250935](https://maedler.in/product/taper-bush-3525-bore-35mm-sku-62250935/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 1615 bore 42mm shallow keyway depth 2.2mm SKU: 62250842](https://maedler.in/product/taper-bush-1615-bore-42mm-shallow-keyway-depth-2-2mm-sku-62250842/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 40mm SKU: 62250840](https://maedler.in/product/taper-bush-1615-bore-40mm-sku-62250840/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 38mm SKU: 62250838](https://maedler.in/product/taper-bush-1615-bore-38mm-sku-62250838/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 35mm SKU: 62250835](https://maedler.in/product/taper-bush-1615-bore-35mm-sku-62250835/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 32mm SKU: 62250832](https://maedler.in/product/taper-bush-1615-bore-32mm-sku-62250832/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 30mm SKU: 62250830](https://maedler.in/product/taper-bush-1615-bore-30mm-sku-62250830/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper clamping bush 1615, bore 28mm SKU: 62250828](https://maedler.in/product/taper-clamping-bush-1615-bore-28mm-sku-62250828/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 25,4mm (1") keyway width 6,350mm keyway height 3,175mm (1/4"x1/8") SKU: 6225082540](https://maedler.in/product/taper-bush-1615-bore-254mm-1-keyway-width-6350mm-keyway-height-3175mm-1-4x1-8-sku-6225082540/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 1615 bore 25mm SKU: 62250825](https://maedler.in/product/taper-bush-1615-bore-25mm-sku-62250825/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 24mm SKU: 62250824](https://maedler.in/product/taper-bush-1615-bore-24mm-sku-62250824/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 22mm SKU: 62250822](https://maedler.in/product/taper-bush-1615-bore-22mm-sku-62250822/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 20mm SKU: 62250820](https://maedler.in/product/taper-bush-1615-bore-20mm-sku-62250820/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 19,05mm (3/4") keyway width 4,763mm keyway height 2,381mm (3/16"x3/32") SKU: 6225081905](https://maedler.in/product/taper-bush-1615-bore-1905mm-3-4-keyway-width-4763mm-keyway-height-2381mm-3-16x3-32-sku-6225081905/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper clamping bush 1615, bore 19mm SKU: 62250819](https://maedler.in/product/taper-clamping-bush-1615-bore-19mm-sku-62250819/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 18mm SKU: 62250818](https://maedler.in/product/taper-bush-1615-bore-18mm-sku-62250818/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 16mm SKU: 62250816](https://maedler.in/product/taper-bush-1615-bore-16mm-sku-62250816/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 15mm SKU: 62250815](https://maedler.in/product/taper-bush-1615-bore-15mm-sku-62250815/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 14mm SKU: 62250814](https://maedler.in/product/taper-bush-1615-bore-14mm-sku-62250814/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Taper bush 1615 bore 12mm SKU: 62250812](https://maedler.in/product/taper-bush-1615-bore-12mm-sku-62250812/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 42 with flat keyway 2.2mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground.  Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 19 mm: 98 Nm; bore 24 mm: 135 Nm; bore 38 mm: 240 Nm; bore 42: 265 Nm. - [Bolt 5/8" x 1 1/4" for Taper bush 3020 and 3030 SKU: 62250799](https://maedler.in/product/bolt-5-8-x-1-1-4-for-taper-bush-3020-and-3030-sku-62250799/): Material:Steel. Supply: One screw. Attention: Order quantity as needed. Up to size 3030, taper bushes have two screws, from 3525 three screws. Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 3020 bore 75mm SKU: 62250775](https://maedler.in/product/taper-bush-3020-bore-75mm-sku-62250775/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 70mm SKU: 62250770](https://maedler.in/product/taper-bush-3020-bore-70mm-sku-62250770/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 65mm SKU: 62250765](https://maedler.in/product/taper-bush-3020-bore-65mm-sku-62250765/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 60mm SKU: 62250760](https://maedler.in/product/taper-bush-3020-bore-60mm-sku-62250760/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 55mm SKU: 62250755](https://maedler.in/product/taper-bush-3020-bore-55mm-sku-62250755/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 50mm SKU: 62250750](https://maedler.in/product/taper-bush-3020-bore-50mm-sku-62250750/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 48mm SKU: 62250748](https://maedler.in/product/taper-bush-3020-bore-48mm-sku-62250748/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 45mm SKU: 62250745](https://maedler.in/product/taper-bush-3020-bore-45mm-sku-62250745/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 42mm SKU: 62250742](https://maedler.in/product/taper-bush-3020-bore-42mm-sku-62250742/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 41,275mm (1 5/8") keyway width 11,113mm keyway height 3,969mm (7/16"x5/32") SKU: 6225074127](https://maedler.in/product/taper-bush-3020-bore-41275mm-1-5-8-keyway-width-11113mm-keyway-height-3969mm-7-16x5-32-sku-6225074127/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 40mm SKU: 62250740](https://maedler.in/product/taper-bush-3020-bore-40mm-sku-62250740/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 38mm SKU: 62250738](https://maedler.in/product/taper-bush-3020-bore-38mm-sku-62250738/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 35mm SKU: 62250735](https://maedler.in/product/taper-bush-3020-bore-35mm-sku-62250735/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 32mm SKU: 62250732](https://maedler.in/product/taper-bush-3020-bore-32mm-sku-62250732/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 30mm SKU: 62250730](https://maedler.in/product/taper-bush-3020-bore-30mm-sku-62250730/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 28mm SKU: 62250728](https://maedler.in/product/taper-bush-3020-bore-28mm-sku-62250728/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 25mm SKU: 62250725](https://maedler.in/product/taper-bush-3020-bore-25mm-sku-62250725/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3020 bore 20mm SKU: 62250720](https://maedler.in/product/taper-bush-3020-bore-20mm-sku-62250720/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner size 8 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Bolt 1/2" x 1" for Taper bush 2517 and 2525 SKU: 62250699](https://maedler.in/product/bolt-1-2-x-1-for-taper-bush-2517-and-2525-sku-62250699/): Material:Steel. Supply: One screw. Attention: Order quantity as needed. Up to size 3030, taper bushes have two screws, from 3525 three screws. Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taperbush 2517 bore 65 mm shallow keyway depth 3.4mm SKU: 62250665](https://maedler.in/product/taperbush-2517-bore-65-mm-shallow-keyway-depth-3-4mm-sku-62250665/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 60mm SKU: 62250660](https://maedler.in/product/taper-bush-2517-bore-60mm-sku-62250660/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 55mm SKU: 62250655](https://maedler.in/product/taper-bush-2517-bore-55mm-sku-62250655/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 50,8mm (2") keyway width 12,7mm keyway height 3,969mm (1/2"x5/32") SKU: 6225065080](https://maedler.in/product/taper-bush-2517-bore-508mm-2-keyway-width-127mm-keyway-height-3969mm-1-2x5-32-sku-6225065080/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 50mm SKU: 62250650](https://maedler.in/product/taper-bush-2517-bore-50mm-sku-62250650/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 48mm SKU: 62250648](https://maedler.in/product/taper-bush-2517-bore-48mm-sku-62250648/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 45mm SKU: 62250645](https://maedler.in/product/taper-bush-2517-bore-45mm-sku-62250645/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 42mm SKU: 62250642](https://maedler.in/product/taper-bush-2517-bore-42mm-sku-62250642/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 40mm SKU: 62250640](https://maedler.in/product/taper-bush-2517-bore-40mm-sku-62250640/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 38mm SKU: 62250638](https://maedler.in/product/taper-bush-2517-bore-38mm-sku-62250638/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 35mm SKU: 62250635](https://maedler.in/product/taper-bush-2517-bore-35mm-sku-62250635/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 32mm SKU: 62250632](https://maedler.in/product/taper-bush-2517-bore-32mm-sku-62250632/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 30mm SKU: 62250630](https://maedler.in/product/taper-bush-2517-bore-30mm-sku-62250630/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 28,575mm (1 1/8") keyway width 7,938mm keyway height 3,175mm (5/16"x1/8") SKU: 6225062857](https://maedler.in/product/taper-bush-2517-bore-28575mm-1-1-8-keyway-width-7938mm-keyway-height-3175mm-5-16x1-8-sku-6225062857/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 2517 bore 28mm SKU: 62250628](https://maedler.in/product/taper-bush-2517-bore-28mm-sku-62250628/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 25,4mm (1") keyway width 6,350mm keyway height 3,175mm (1/4"x1/8") SKU: 6225062540](https://maedler.in/product/taper-bush-2517-bore-254mm-1-keyway-width-6350mm-keyway-height-3175mm-1-4x1-8-sku-6225062540/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 25mm SKU: 62250625](https://maedler.in/product/taper-bush-2517-bore-25mm-sku-62250625/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 24mm SKU: 62250624](https://maedler.in/product/taper-bush-2517-bore-24mm-sku-62250624/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 22mm SKU: 62250622](https://maedler.in/product/taper-bush-2517-bore-22mm-sku-62250622/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 20mm SKU: 62250620](https://maedler.in/product/taper-bush-2517-bore-20mm-sku-62250620/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 19mm SKU: 62250619](https://maedler.in/product/taper-bush-2517-bore-19mm-sku-62250619/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 18mm SKU: 62250618](https://maedler.in/product/taper-bush-2517-bore-18mm-sku-62250618/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 16mm SKU: 62250616](https://maedler.in/product/taper-bush-2517-bore-16mm-sku-62250616/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Taper bush 2517 bore 15mm SKU: 62250615](https://maedler.in/product/taper-bush-2517-bore-15mm-sku-62250615/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1 (bore 65mm wit shallow keyway depth 3.4mm). Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 506 99, order quantity as needed). Screw size BSW 1/2" x 1". Spanner Size 6 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 50 Nm. Slip torque without keyway: bore 38 mm: 380 Nm; bore 48 mm: 510 Nm; bore 60 mm: 690 Nm. - [Bolt 7/16" x 7/8" for Taper bush 2012 and 2017 SKU: 62250599](https://maedler.in/product/bolt-7-16-x-7-8-for-taper-bush-2012-and-2017-sku-62250599/): Material:Steel. Supply: One screw. Attention: Order quantity as needed. Up to size 3030, taper bushes have two screws, from 3525 three screws. Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 2012 bore 50mm SKU: 62250550](https://maedler.in/product/taper-bush-2012-bore-50mm-sku-62250550/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 48mm SKU: 62250548](https://maedler.in/product/taper-bush-2012-bore-48mm-sku-62250548/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 45mm SKU: 62250545](https://maedler.in/product/taper-bush-2012-bore-45mm-sku-62250545/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 42mm SKU: 62250542](https://maedler.in/product/taper-bush-2012-bore-42mm-sku-62250542/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 41,275mm (1 5/8") keyway width 9,525mm keyway height 3,175mm (3/8"x1/8") SKU: 6225054127](https://maedler.in/product/taper-bush-2012-bore-41275mm-1-5-8-keyway-width-9525mm-keyway-height-3175mm-3-8x1-8-sku-6225054127/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 40mm SKU: 62250540](https://maedler.in/product/taper-bush-2012-bore-40mm-sku-62250540/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 38,1mm (1 1/2") keyway width 9,525mm keyway height 3,175mm (3/8"x1/8") SKU: 6225053810](https://maedler.in/product/taper-bush-2012-bore-381mm-1-1-2-keyway-width-9525mm-keyway-height-3175mm-3-8x1-8-sku-6225053810/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 38mm SKU: 62250538](https://maedler.in/product/taper-bush-2012-bore-38mm-sku-62250538/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 35mm SKU: 62250535](https://maedler.in/product/taper-bush-2012-bore-35mm-sku-62250535/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 34,925mm (1 3/8") keyway width 9,525mm keyway height 3,175mm (3/8"x1/8") SKU: 6225053492](https://maedler.in/product/taper-bush-2012-bore-34925mm-1-3-8-keyway-width-9525mm-keyway-height-3175mm-3-8x1-8-sku-6225053492/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 2012 bore 32mm SKU: 62250532](https://maedler.in/product/taper-bush-2012-bore-32mm-sku-62250532/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 30mm SKU: 62250530](https://maedler.in/product/taper-bush-2012-bore-30mm-sku-62250530/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Taper bush 2012 bore 28,575mm (1 1/8") keyway width 7,938mm keyway height 3,175mm (5/16"x1/8") SKU: 6225052857](https://maedler.in/product/taper-bush-2012-bore-28575mm-1-1-8-keyway-width-7938mm-keyway-height-3175mm-5-16x1-8-sku-6225052857/): Material: GG25. Bore in inch-size, with feather keyways like British Standard (BS). Screws included in delivery. Thread BSW. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 2012 bore 28mm SKU: 62250528](https://maedler.in/product/taper-bush-2012-bore-28mm-sku-62250528/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Inch bores with feather keyways like British Standard (BS). Screws included in delivery (spare screw product no. 622 505 99, order quantity as needed). Screw size BSW 7/16" x 7/8". Spanner Size 6 mm. Cone and front side ground.  Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 30 Nm. Slip torque without keyway: bore 24 mm: 165 Nm; bore 38 mm: 310 Nm; bore 50 mm: 420 Nm. - [Spur gear made of steel C45 with hub module 1 50 teeth tooth width 6.5mm outside diameter 52mm SKU: 21305000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-50-teeth-tooth-width-6-5mm-outside-diameter-52mm-sku-21305000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of C45 with hub module 1 48 teeth tooth width 6.5mm outside diameter 50mm SKU: 21304800](https://maedler.in/product/spur-gear-made-of-c45-with-hub-module-1-48-teeth-tooth-width-6-5mm-outside-diameter-50mm-sku-21304800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 45 teeth tooth width 6.5mm outside diameter 47mm SKU: 21304500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-45-teeth-tooth-width-6-5mm-outside-diameter-47mm-sku-21304500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 42 teeth tooth width 6.5mm outside diameter 44mm SKU: 21304200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-42-teeth-tooth-width-6-5mm-outside-diameter-44mm-sku-21304200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 40 teeth tooth width 6.5mm outside diameter 42mm SKU: 21304000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-40-teeth-tooth-width-6-5mm-outside-diameter-42mm-sku-21304000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 36 teeth tooth width 6.5mm outside diameter 38mm SKU: 21303600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-36-teeth-tooth-width-6-5mm-outside-diameter-38mm-sku-21303600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 35 teeth tooth width 6.5mm outside diameter 37mm SKU: 21303500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-35-teeth-tooth-width-6-5mm-outside-diameter-37mm-sku-21303500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 32 teeth tooth width 6.5mm outside diameter 34mm SKU: 21303200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-32-teeth-tooth-width-6-5mm-outside-diameter-34mm-sku-21303200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 30 teeth tooth width 6.5mm outside diameter 32mm SKU: 21303000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-30-teeth-tooth-width-6-5mm-outside-diameter-32mm-sku-21303000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 28 teeth tooth width 6.5mm outside diameter 30mm SKU: 21302800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-28-teeth-tooth-width-6-5mm-outside-diameter-30mm-sku-21302800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 25 teeth tooth width 6.5mm outside diameter 27mm SKU: 21302500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-teeth-tooth-width-6-5mm-outside-diameter-27mm-sku-21302500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 24 teeth tooth width 6.5mm outside diameter 26mm SKU: 21302400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-24-teeth-tooth-width-6-5mm-outside-diameter-26mm-sku-21302400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 22 teeth tooth width 6.5mm outside diameter 24mm SKU: 21302200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-22-teeth-tooth-width-6-5mm-outside-diameter-24mm-sku-21302200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 20 teeth tooth width 6.5mm outside diameter 22mm SKU: 21302000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-20-teeth-tooth-width-6-5mm-outside-diameter-22mm-sku-21302000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 18 teeth tooth width 6.5mm outside diameter 20mm SKU: 21301800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-18-teeth-tooth-width-6-5mm-outside-diameter-20mm-sku-21301800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 17 teeth tooth width 6.5mm outside diameter 19mm SKU: 21301700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-17-teeth-tooth-width-6-5mm-outside-diameter-19mm-sku-21301700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 16 teeth tooth width 6.5mm outside diameter 18mm SKU: 21301600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-16-teeth-tooth-width-6-5mm-outside-diameter-18mm-sku-21301600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 15 teeth tooth width 6.5mm outside diameter 17mm SKU: 21301500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-15-teeth-tooth-width-6-5mm-outside-diameter-17mm-sku-21301500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 14 teeth tooth width 6.5mm outside diameter 16mm SKU: 21301400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-14-teeth-tooth-width-6-5mm-outside-diameter-16mm-sku-21301400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 12 teeth tooth width 6.5mm outside diameter 14mm SKU: 21301200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-12-teeth-tooth-width-6-5mm-outside-diameter-14mm-sku-21301200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 10 teeth tooth width 6.5mm outside diameter 12mm SKU: 21301000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-10-teeth-tooth-width-6-5mm-outside-diameter-12mm-sku-21301000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Triple-strand sprocket DRT 24 B-3 1 1/2" x 1" 76 teeth material cast iron for taper bush type 4545 SKU: 13977576G](https://maedler.in/product/triple-strand-sprocket-drt-24-b-3-1-1-2-x-1-76-teeth-material-cast-iron-for-taper-bush-type-4545-sku-13977576g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 24,1 mm, B3 = 120,3 mm, c = 4 mm, r3 = 38 mm.Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 24 B-3 1 1/2" x 1" 57 teeth material cast iron for taper bush type 4040 SKU: 13977557G](https://maedler.in/product/triple-strand-sprocket-drt-24-b-3-1-1-2-x-1-57-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977557g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 24,1 mm, B3 = 120,3 mm, c = 4 mm, r3 = 38 mm.Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 24 B-3 1 1/2" x 1" 45 teeth material cast iron for taper bush type 4040 SKU: 13977545G](https://maedler.in/product/triple-strand-sprocket-drt-24-b-3-1-1-2-x-1-45-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977545g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 24,1 mm, B3 = 120,3 mm, c = 4 mm, r3 = 38 mm.Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 24 B-3 1 1/2" x 1" 38 teeth material cast iron for taper bush type 4040 SKU: 13977538G](https://maedler.in/product/triple-strand-sprocket-drt-24-b-3-1-1-2-x-1-38-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977538g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 24,1 mm, B3 = 120,3 mm, c = 4 mm, r3 = 38 mm.Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 20 B-3 1 1/4" x 3/4" 76 teeth material cast iron for taper bush type 4040 SKU: 13977176G](https://maedler.in/product/triple-strand-sprocket-drt-20-b-3-1-1-4-x-3-4-76-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977176g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 18,5 mm, B3 = 91 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 20 B-3 1 1/4" x 3/4" 57 teeth material cast iron for taper bush type 4040 SKU: 13977157G](https://maedler.in/product/triple-strand-sprocket-drt-20-b-3-1-1-4-x-3-4-57-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13977157g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 18,5 mm, B3 = 91 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 20 B-3 1 1/4" x 3/4" 38 teeth material cast iron for taper bush type 3535 SKU: 13977138G](https://maedler.in/product/triple-strand-sprocket-drt-20-b-3-1-1-4-x-3-4-38-teeth-material-cast-iron-for-taper-bush-type-3535-sku-13977138g/): Material: Grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 18,5 mm, B3 = 91 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 114 teeth material cast iron for taper bush type 4545 SKU: 13877188G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-114-teeth-material-cast-iron-for-taper-bush-type-4545-sku-13877188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 95 teeth material cast iron for taper bush type 4040 SKU: 13877183G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-95-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13877183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 95 teeth material steel for taper bush type 4030 SKU: 13877183](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-95-teeth-material-steel-for-taper-bush-type-4030-sku-13877183/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 76 teeth material cast iron for taper bush type 4040 SKU: 13877176G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-76-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13877176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 57 teeth material cast iron for taper bush type 4040 SKU: 13877157G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-57-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13877157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 45 teeth material cast iron for taper bush type 4040 SKU: 13877145G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-45-teeth-material-cast-iron-for-taper-bush-type-4040-sku-13877145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 38 teeth material cast iron for taper bush type 3535 SKU: 13877138G](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-38-teeth-material-cast-iron-for-taper-bush-type-3535-sku-13877138g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 38 teeth material steel for taper bush type 3525 SKU: 13877138](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-38-teeth-material-steel-for-taper-bush-type-3525-sku-13877138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 30 teeth material steel for taper bush type 3525 SKU: 13877130](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-30-teeth-material-steel-for-taper-bush-type-3525-sku-13877130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 27 teeth material steel for taper bush type 3525 SKU: 13877127](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-27-teeth-material-steel-for-taper-bush-type-3525-sku-13877127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 25 teeth material steel for taper bush type 3525 SKU: 13877125](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-25-teeth-material-steel-for-taper-bush-type-3525-sku-13877125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 23 teeth material steel for taper bush type 3525 SKU: 13877123](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-23-teeth-material-steel-for-taper-bush-type-3525-sku-13877123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 21 teeth material steel for taper bush type 3030 SKU: 13877121](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-21-teeth-material-steel-for-taper-bush-type-3030-sku-13877121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 19 teeth material steel for taper bush type 3020 SKU: 13877119](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-19-teeth-material-steel-for-taper-bush-type-3020-sku-13877119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 16 B-3 1"x17,02mm 17 teeth material steel for taper bush type 2517 SKU: 13877117](https://maedler.in/product/triple-strand-sprocket-drt-16-b-3-1x1702mm-17-teeth-material-steel-for-taper-bush-type-2517-sku-13877117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 16,2 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 57 teeth material steel SKU: 13825700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-57-teeth-material-steel-sku-13825700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 48 teeth material steel SKU: 13824800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-48-teeth-material-steel-sku-13824800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 45 teeth material steel SKU: 13824500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-45-teeth-material-steel-sku-13824500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 38 teeth material steel SKU: 13823800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-38-teeth-material-steel-sku-13823800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 35 teeth material steel SKU: 13823500](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-35-teeth-material-steel-sku-13823500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 30 teeth material steel SKU: 13823000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-30-teeth-material-steel-sku-13823000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 27 teeth material steel SKU: 13822700](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-27-teeth-material-steel-sku-13822700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 24 teeth material steel SKU: 13822400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-24-teeth-material-steel-sku-13822400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 22 teeth material steel SKU: 13822200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-22-teeth-material-steel-sku-13822200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 20 teeth material steel SKU: 13822000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-20-teeth-material-steel-sku-13822000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 18 teeth material steel SKU: 13821800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-18-teeth-material-steel-sku-13821800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 16 teeth material steel SKU: 13821600](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-16-teeth-material-steel-sku-13821600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 14 teeth material steel SKU: 13821400](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-14-teeth-material-steel-sku-13821400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 12 teeth material steel SKU: 13821200](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-12-teeth-material-steel-sku-13821200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 10 teeth material steel SKU: 13821000](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-10-teeth-material-steel-sku-13821000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand plate wheel DRL without hub 16 B-3 1"x17,02mm 8 teeth material steel SKU: 13820800](https://maedler.in/product/triple-strand-plate-wheel-drl-without-hub-16-b-3-1x1702mm-8-teeth-material-steel-sku-13820800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 114 teeth material cast iron SKU: 13818800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-114-teeth-material-cast-iron-sku-13818800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 95 teeth material cast iron SKU: 13818300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-95-teeth-material-cast-iron-sku-13818300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 76 teeth material cast iron SKU: 13817600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-76-teeth-material-cast-iron-sku-13817600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 57 teeth material cast iron SKU: 13815700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-57-teeth-material-cast-iron-sku-13815700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 45 teeth material cast iron SKU: 13814500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-45-teeth-material-cast-iron-sku-13814500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 38 teeth material cast iron SKU: 13813800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-38-teeth-material-cast-iron-sku-13813800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 36 teeth material steel SKU: 13813600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-36-teeth-material-steel-sku-13813600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 35 teeth material steel SKU: 13813500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-35-teeth-material-steel-sku-13813500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 32 teeth material steel SKU: 13813200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-32-teeth-material-steel-sku-13813200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 31 teeth material steel SKU: 13813100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-31-teeth-material-steel-sku-13813100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 30 teeth material steel SKU: 13813000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-30-teeth-material-steel-sku-13813000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 29 teeth material steel SKU: 13812900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-29-teeth-material-steel-sku-13812900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 28 teeth material steel SKU: 13812800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-28-teeth-material-steel-sku-13812800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 27 teeth material steel SKU: 13812700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-27-teeth-material-steel-sku-13812700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 26 teeth material steel SKU: 13812600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-26-teeth-material-steel-sku-13812600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 25 teeth material steel SKU: 13812500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-25-teeth-material-steel-sku-13812500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 24 teeth material steel SKU: 13812400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-24-teeth-material-steel-sku-13812400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 23 teeth material steel SKU: 13812300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-23-teeth-material-steel-sku-13812300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 22 teeth material steel SKU: 13812200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-22-teeth-material-steel-sku-13812200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 21 teeth material steel SKU: 13812100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-21-teeth-material-steel-sku-13812100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 20 teeth material steel SKU: 13812000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-20-teeth-material-steel-sku-13812000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 19 teeth material steel SKU: 13811900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-19-teeth-material-steel-sku-13811900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 18 teeth material steel SKU: 13811800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-18-teeth-material-steel-sku-13811800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 17 teeth material steel SKU: 13811700](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-17-teeth-material-steel-sku-13811700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 16 teeth material steel SKU: 13811600](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-16-teeth-material-steel-sku-13811600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 15 teeth material steel SKU: 13811500](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-15-teeth-material-steel-sku-13811500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 14 teeth material steel SKU: 13811400](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-14-teeth-material-steel-sku-13811400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 13 teeth material steel SKU: 13811300](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-13-teeth-material-steel-sku-13811300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 12 teeth material steel SKU: 13811200](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-12-teeth-material-steel-sku-13811200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 11 teeth material steel SKU: 13811100](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-11-teeth-material-steel-sku-13811100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 10 teeth material steel SKU: 13811000](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-10-teeth-material-steel-sku-13811000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 9 teeth material steel SKU: 13810900](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-9-teeth-material-steel-sku-13810900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 8 teeth material steel SKU: 13810800](https://maedler.in/product/triple-strand-sprocket-drs-with-hub-16-b-3-1x17-02mm-8-teeth-material-steel-sku-13810800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 15,8 mm, B3 = 79,6 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 114 teeth material cast iron for taper bush type 3030 SKU: 13777188G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-114-teeth-material-cast-iron-for-taper-bush-type-3030-sku-13777188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 95 teeth material cast iron for taper bush type 3030 SKU: 13777183G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-3030-sku-13777183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 76 teeth material cast iron for taper bush type 3020 SKU: 13777176G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-13777176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 57 teeth material cast iron for taper bush type 3020 SKU: 13777157G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-57-teeth-material-cast-iron-for-taper-bush-type-3020-sku-13777157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 45 teeth material cast iron for taper bush type 3020 SKU: 13777145G](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-45-teeth-material-cast-iron-for-taper-bush-type-3020-sku-13777145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 45 teeth material steel for taper bush type 3020 SKU: 13777145](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-45-teeth-material-steel-for-taper-bush-type-3020-sku-13777145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 38 teeth material steel for taper bush type 3020 SKU: 13777138](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-38-teeth-material-steel-for-taper-bush-type-3020-sku-13777138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Triple-strand sprocket DRT 12 B-3 3/4x7/16" 30 teeth material steel for taper bush type 3020 SKU: 13777130](https://maedler.in/product/triple-strand-sprocket-drt-12-b-3-3-4x7-16-30-teeth-material-steel-for-taper-bush-type-3020-sku-13777130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Sprockets for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. General dimensions: B1 = 11,1 mm, B3 = 49,8 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Shaft collar DIN 705 A bore 7mm set screw DIN EN 27434 (old DIN 553) SKU: 62300700](https://maedler.in/product/shaft-collar-din-705-a-bore-7mm-set-screw-din-en-27434-old-din-553-sku-62300700/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 6mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623006006](https://maedler.in/product/shaft-collar-din-705-a-bore-6mm-set-screw-din-en-iso-4027-old-din-914-sku-623006006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 6mm set screw DIN EN 27434 (old DIN 553) SKU: 62300600](https://maedler.in/product/shaft-collar-din-705-a-bore-6mm-set-screw-din-en-27434-old-din-553-sku-62300600/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 5mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623005006](https://maedler.in/product/shaft-collar-din-705-a-bore-5mm-set-screw-din-en-iso-4027-old-din-914-sku-623005006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 5mm set screw DIN EN 27434 (old DIN 553) SKU: 62300500](https://maedler.in/product/shaft-collar-din-705-a-bore-5mm-set-screw-din-en-27434-old-din-553-sku-62300500/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 4mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623004006](https://maedler.in/product/shaft-collar-din-705-a-bore-4mm-set-screw-din-en-iso-4027-old-din-914-sku-623004006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 4mm set screw DIN EN 27434 (old DIN 553) SKU: 62300400](https://maedler.in/product/shaft-collar-din-705-a-bore-4mm-set-screw-din-en-27434-old-din-553-sku-62300400/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 3mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623003006](https://maedler.in/product/shaft-collar-din-705-a-bore-3mm-set-screw-din-en-iso-4027-old-din-914-sku-623003006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 3mm set screw DIN EN 27434 (old DIN 553) SKU: 62300300](https://maedler.in/product/shaft-collar-din-705-a-bore-3mm-set-screw-din-en-27434-old-din-553-sku-62300300/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [MAEDLER deep groove ball bearing single row inner diameter 3mm outer diameter 10mm width 4mm shielded on both sides SKU: 623-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-3mm-outer-diameter-10mm-width-4mm-shielded-on-both-sides-sku-623-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 3mm outer diameter 10mm width 4mm shielded on both sides clearance C3 SKU: 623-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-3mm-outer-diameter-10mm-width-4mm-shielded-on-both-sides-clearance-c3-sku-623-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Bolt 7/8" x 2 1/4"" for Taper bush 5050 SKU: 62251699](https://maedler.in/product/bolt-7-8-x-2-1-4-for-taper-bush-5050-sku-62251699/): Material:Steel. Supply: One screw. Attention: Order quantity as needed. Up to size 3030, taper bushes have two screws, from 3525 three screws. Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper-bush 5050 bore 125mm SKU: 62251697](https://maedler.in/product/taper-bush-5050-bore-125mm-sku-62251697/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 120mm SKU: 62251696](https://maedler.in/product/taper-bush-5050-bore-120mm-sku-62251696/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 95mm SKU: 62251695](https://maedler.in/product/taper-bush-5050-bore-95mm-sku-62251695/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 115mm SKU: 62251694](https://maedler.in/product/taper-bush-5050-bore-115mm-sku-62251694/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 110mm SKU: 62251693](https://maedler.in/product/taper-bush-5050-bore-110mm-sku-62251693/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 105mm SKU: 62251692](https://maedler.in/product/taper-bush-5050-bore-105mm-sku-62251692/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 100mm SKU: 62251691](https://maedler.in/product/taper-bush-5050-bore-100mm-sku-62251691/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 90mm SKU: 62251690](https://maedler.in/product/taper-bush-5050-bore-90mm-sku-62251690/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 85mm SKU: 62251685](https://maedler.in/product/taper-bush-5050-bore-85mm-sku-62251685/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 80mm SKU: 62251680](https://maedler.in/product/taper-bush-5050-bore-80mm-sku-62251680/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 75mm SKU: 62251675](https://maedler.in/product/taper-bush-5050-bore-75mm-sku-62251675/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Taper-bush 5050 bore 70mm SKU: 62251670](https://maedler.in/product/taper-bush-5050-bore-70mm-sku-62251670/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 516 99, order quantity as needed). Screw size BSW 7/8" x 2 1/4". Spanner size 14 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 270 Nm. Slip torque without keyway: bore 75 mm: 3250 Nm; bore 100 mm: 4800 Nm; bore 125 mm: 5900 Nm - [Bolt 3/4" x 2"" for Taper bush 4545 SKU: 62251599](https://maedler.in/product/bolt-3-4-x-2-for-taper-bush-4545-sku-62251599/): Material:Steel. Supply: One screw. Attention: Order quantity as needed. Up to size 3030, taper bushes have two screws, from 3525 three screws. Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper-bush 4545 bore 95mm SKU: 62251595](https://maedler.in/product/taper-bush-4545-bore-95mm-sku-62251595/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 110mm SKU: 62251593](https://maedler.in/product/taper-bush-4545-bore-110mm-sku-62251593/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 100mm SKU: 62251591](https://maedler.in/product/taper-bush-4545-bore-100mm-sku-62251591/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 90mm SKU: 62251590](https://maedler.in/product/taper-bush-4545-bore-90mm-sku-62251590/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 85mm SKU: 62251585](https://maedler.in/product/taper-bush-4545-bore-85mm-sku-62251585/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 80mm SKU: 62251580](https://maedler.in/product/taper-bush-4545-bore-80mm-sku-62251580/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 75mm SKU: 62251575](https://maedler.in/product/taper-bush-4545-bore-75mm-sku-62251575/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 70mm SKU: 62251570](https://maedler.in/product/taper-bush-4545-bore-70mm-sku-62251570/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 65mm SKU: 62251565](https://maedler.in/product/taper-bush-4545-bore-65mm-sku-62251565/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 60mm SKU: 62251560](https://maedler.in/product/taper-bush-4545-bore-60mm-sku-62251560/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4545 bore 55mm SKU: 62251555](https://maedler.in/product/taper-bush-4545-bore-55mm-sku-62251555/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 515 99, order quantity as needed). Screw size BSW 3/4" x 2". Spanner size 14mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fasting torque: 190 Nm. Slip torque without keyway: bore 55 mm: 1840 Nm; bore 75mm: 3000 Nm; bore 100mm: 4500 Nm - [Taper-bush 4040 bore 95mm SKU: 62251495](https://maedler.in/product/taper-bush-4040-bore-95mm-sku-62251495/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 100mm SKU: 62251491](https://maedler.in/product/taper-bush-4040-bore-100mm-sku-62251491/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 90mm SKU: 62251490](https://maedler.in/product/taper-bush-4040-bore-90mm-sku-62251490/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 85mm SKU: 62251485](https://maedler.in/product/taper-bush-4040-bore-85mm-sku-62251485/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 80mm SKU: 62251480](https://maedler.in/product/taper-bush-4040-bore-80mm-sku-62251480/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 75mm SKU: 62251475](https://maedler.in/product/taper-bush-4040-bore-75mm-sku-62251475/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 70mm SKU: 62251470](https://maedler.in/product/taper-bush-4040-bore-70mm-sku-62251470/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 65mm SKU: 62251465](https://maedler.in/product/taper-bush-4040-bore-65mm-sku-62251465/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 60mm SKU: 62251460](https://maedler.in/product/taper-bush-4040-bore-60mm-sku-62251460/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 55mm SKU: 62251455](https://maedler.in/product/taper-bush-4040-bore-55mm-sku-62251455/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 50mm SKU: 62251450](https://maedler.in/product/taper-bush-4040-bore-50mm-sku-62251450/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 48mm SKU: 62251448](https://maedler.in/product/taper-bush-4040-bore-48mm-sku-62251448/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 45mm SKU: 62251445](https://maedler.in/product/taper-bush-4040-bore-45mm-sku-62251445/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 42mm SKU: 62251442](https://maedler.in/product/taper-bush-4040-bore-42mm-sku-62251442/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4040 bore 40mm SKU: 62251440](https://maedler.in/product/taper-bush-4040-bore-40mm-sku-62251440/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper bush 1215 bore 32mm SKU: 62251332](https://maedler.in/product/taper-bush-1215-bore-32mm-sku-62251332/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 30mm SKU: 62251330](https://maedler.in/product/taper-bush-1215-bore-30mm-sku-62251330/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 28mm SKU: 62251328](https://maedler.in/product/taper-bush-1215-bore-28mm-sku-62251328/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 25mm SKU: 62251325](https://maedler.in/product/taper-bush-1215-bore-25mm-sku-62251325/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 24mm SKU: 62251324](https://maedler.in/product/taper-bush-1215-bore-24mm-sku-62251324/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 22mm SKU: 62251322](https://maedler.in/product/taper-bush-1215-bore-22mm-sku-62251322/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 20mm SKU: 62251320](https://maedler.in/product/taper-bush-1215-bore-20mm-sku-62251320/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 19mm SKU: 62251319](https://maedler.in/product/taper-bush-1215-bore-19mm-sku-62251319/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 18mm SKU: 62251318](https://maedler.in/product/taper-bush-1215-bore-18mm-sku-62251318/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 16mm SKU: 62251316](https://maedler.in/product/taper-bush-1215-bore-16mm-sku-62251316/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Taper bush 1215 bore 14mm SKU: 62251314](https://maedler.in/product/taper-bush-1215-bore-14mm-sku-62251314/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 503 99, order quantity as needed). Thread BSW 3/8" x 5/8". Spanner size 5 mm. Cone and front side ground. Shaft tolerance +0,5 mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 20 Nm. Slip torque without keyway: bore 16 mm: 82 Nm; bore 19 mm: 105 Nm; bore 24 mm: 140 Nm; bore 32: 180 Nm. - [Bolt 5/8" x 1 3/4"" for Taper bush 4030 and 4040 SKU: 62251299](https://maedler.in/product/bolt-5-8-x-1-3-4-for-taper-bush-4030-and-4040-sku-62251299/): Material:Steel. Supply: One screw. Attention: Order quantity as needed. Up to size 3030, taper bushes have two screws, from 3525 three screws. Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper-bush 4030 bore 100mm SKU: 62251291](https://maedler.in/product/taper-bush-4030-bore-100mm-sku-62251291/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 90mm SKU: 62251290](https://maedler.in/product/taper-bush-4030-bore-90mm-sku-62251290/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 85mm SKU: 62251285](https://maedler.in/product/taper-bush-4030-bore-85mm-sku-62251285/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 80mm SKU: 62251280](https://maedler.in/product/taper-bush-4030-bore-80mm-sku-62251280/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 75mm SKU: 62251275](https://maedler.in/product/taper-bush-4030-bore-75mm-sku-62251275/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 70mm SKU: 62251270](https://maedler.in/product/taper-bush-4030-bore-70mm-sku-62251270/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 65mm SKU: 62251265](https://maedler.in/product/taper-bush-4030-bore-65mm-sku-62251265/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 60mm SKU: 62251260](https://maedler.in/product/taper-bush-4030-bore-60mm-sku-62251260/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 55mm SKU: 62251255](https://maedler.in/product/taper-bush-4030-bore-55mm-sku-62251255/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 50mm SKU: 62251250](https://maedler.in/product/taper-bush-4030-bore-50mm-sku-62251250/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 48mm SKU: 62251248](https://maedler.in/product/taper-bush-4030-bore-48mm-sku-62251248/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 45mm SKU: 62251245](https://maedler.in/product/taper-bush-4030-bore-45mm-sku-62251245/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 42mm SKU: 62251242](https://maedler.in/product/taper-bush-4030-bore-42mm-sku-62251242/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper-bush 4030 bore 40mm SKU: 62251240](https://maedler.in/product/taper-bush-4030-bore-40mm-sku-62251240/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 512 99, order quantity as needed). Screw size BSW 5/8" x 1 3/4". Spanner size 12 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 170 Nm. Slip torque without keyway: bore 48 mm: 1250 Nm; bore 75 mm: 2200 Nm; bore 100 mm: 3460 Nm. - [Taper bush 3030 bore 75mm SKU: 62251175](https://maedler.in/product/taper-bush-3030-bore-75mm-sku-62251175/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 70mm SKU: 62251170](https://maedler.in/product/taper-bush-3030-bore-70mm-sku-62251170/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 65mm SKU: 62251165](https://maedler.in/product/taper-bush-3030-bore-65mm-sku-62251165/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 60mm SKU: 62251160](https://maedler.in/product/taper-bush-3030-bore-60mm-sku-62251160/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 55mm SKU: 62251155](https://maedler.in/product/taper-bush-3030-bore-55mm-sku-62251155/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 50mm SKU: 62251150](https://maedler.in/product/taper-bush-3030-bore-50mm-sku-62251150/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 48mm SKU: 62251148](https://maedler.in/product/taper-bush-3030-bore-48mm-sku-62251148/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 45mm SKU: 62251145](https://maedler.in/product/taper-bush-3030-bore-45mm-sku-62251145/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 42mm SKU: 62251142](https://maedler.in/product/taper-bush-3030-bore-42mm-sku-62251142/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 40mm SKU: 62251140](https://maedler.in/product/taper-bush-3030-bore-40mm-sku-62251140/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 38mm SKU: 62251138](https://maedler.in/product/taper-bush-3030-bore-38mm-sku-62251138/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 35mm SKU: 62251135](https://maedler.in/product/taper-bush-3030-bore-35mm-sku-62251135/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Taper bush 3030 bore 30mm SKU: 62251130](https://maedler.in/product/taper-bush-3030-bore-30mm-sku-62251130/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 507 99, order quantity as needed). Screw size BSW 5/8" x 1 1/4". Spanner Size 8 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Fastening torque: 90 Nm. Slip torque without keyway: bore 38 mm: 480 Nm; bore 48 mm: 600 Nm; bore 60 mm: 900 Nm; bore 75: 1300 Nm. - [Bolt 1/2" x 1 1/2" for Taper bush 3525 and 3535 SKU: 62251099](https://maedler.in/product/bolt-1-2-x-1-1-2-for-taper-bush-3525-and-3535-sku-62251099/): Material:Steel. Supply: One screw. Attention: Order quantity as needed. Up to size 3030, taper bushes have two screws, from 3525 three screws. Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Taper bush 3535 bore 90mm SKU: 62251090](https://maedler.in/product/taper-bush-3535-bore-90mm-sku-62251090/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 85mm SKU: 62251085](https://maedler.in/product/taper-bush-3535-bore-85mm-sku-62251085/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3535 bore 80mm SKU: 62251080](https://maedler.in/product/taper-bush-3535-bore-80mm-sku-62251080/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3535 bore 75mm SKU: 62251075](https://maedler.in/product/taper-bush-3535-bore-75mm-sku-62251075/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-Spannbuchse 3535 Bohrung 70 mm SKU: 62251070](https://maedler.in/product/taper-spannbuchse-3535-bohrung-70-mm-sku-62251070/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 65 mm SKU: 62251065](https://maedler.in/product/taper-bush-3535-bore-65-mm-sku-62251065/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 60 mm SKU: 62251060](https://maedler.in/product/taper-bush-3535-bore-60-mm-sku-62251060/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper bush 3535 bore 55mm SKU: 62251055](https://maedler.in/product/taper-bush-3535-bore-55mm-sku-62251055/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Taper-bush 3535 bore 50mm SKU: 62251050](https://maedler.in/product/taper-bush-3535-bore-50mm-sku-62251050/): Material: GG25. Bores ISO E8. Keyways in accordance with DIN 6885/1. Screws included in delivery (spare screw product no. 622 510 99, order quantity as needed). Screw size BSW 1/2" x 1 1/2". Spanner size 10 mm. Cone and front side ground. Shaft tolerance +0,5mm / -0,125 mm. Can be used with or without feather key, depending on the required torque. Other bush sizes and bores are available on short notice (some in stock). Assembly instructions In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) Recommended fastening torque for hubs from grey cast iron: 90 Nm. Slip torque without keyway: bore 42 mm: 550 Nm; bore 60 mm: 1130 Nm; bore 90 mm: 1800 Nm. Recommended fastening torque for hubs from steel: 112 Nm. Slip torque without keyway: bore 42 mm: 700 Nm; bore 60 mm: 1450 Nm; bore 90 mm: 2300 Nm. - [Spur gear made of steel C45 with hub module 1 31 teeth tooth width 15mm outside diameter 33mm SKU: 21411031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-31-teeth-tooth-width-15mm-outside-diameter-33mm-sku-21411031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 30 teeth tooth width 15mm outside diameter 32mm SKU: 21411030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-30-teeth-tooth-width-15mm-outside-diameter-32mm-sku-21411030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 29 teeth tooth width 15mm outside diameter 31mm SKU: 21411029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-29-teeth-tooth-width-15mm-outside-diameter-31mm-sku-21411029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 28 teeth tooth width 15mm outside diameter 30mm SKU: 21411028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-28-teeth-tooth-width-15mm-outside-diameter-30mm-sku-21411028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 27 teeth tooth width 15mm outside diameter 29mm SKU: 21411027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-27-teeth-tooth-width-15mm-outside-diameter-29mm-sku-21411027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 26 teeth tooth width 15mm outside diameter 28mm SKU: 21411026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-26-teeth-tooth-width-15mm-outside-diameter-28mm-sku-21411026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 25 teeth tooth width 15mm outside diameter 27mm SKU: 21411025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-teeth-tooth-width-15mm-outside-diameter-27mm-sku-21411025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 24 teeth tooth width 15mm outside diameter 26mm SKU: 21411024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-24-teeth-tooth-width-15mm-outside-diameter-26mm-sku-21411024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 23 teeth tooth width 15mm outside diameter 25mm SKU: 21411023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-23-teeth-tooth-width-15mm-outside-diameter-25mm-sku-21411023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 22 teeth tooth width 15mm outside diameter 24mm SKU: 21411022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-22-teeth-tooth-width-15mm-outside-diameter-24mm-sku-21411022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 21 teeth tooth width 15mm outside diameter 23mm SKU: 21411021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-21-teeth-tooth-width-15mm-outside-diameter-23mm-sku-21411021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 20 teeth tooth width 15mm outside diameter 22mm SKU: 21411020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-20-teeth-tooth-width-15mm-outside-diameter-22mm-sku-21411020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 19 teeth tooth width 15mm outside diameter 21mm SKU: 21411019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-19-teeth-tooth-width-15mm-outside-diameter-21mm-sku-21411019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 18 teeth tooth width 15mm outside diameter 20mm SKU: 21411018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-18-teeth-tooth-width-15mm-outside-diameter-20mm-sku-21411018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 17 teeth tooth width 15mm outside diameter 19mm SKU: 21411017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-17-teeth-tooth-width-15mm-outside-diameter-19mm-sku-21411017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 16 teeth tooth width 15mm outside diameter 18mm SKU: 21411016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-16-teeth-tooth-width-15mm-outside-diameter-18mm-sku-21411016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 15 teeth tooth width 15mm outside diameter 17mm SKU: 21411015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-15-teeth-tooth-width-15mm-outside-diameter-17mm-sku-21411015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 14 teeth tooth width 15mm outside diameter 16mm SKU: 21411014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-14-teeth-tooth-width-15mm-outside-diameter-16mm-sku-21411014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 13 teeth tooth width 15mm outside diameter 15mm SKU: 21411013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-13-teeth-tooth-width-15mm-outside-diameter-15mm-sku-21411013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 12 teeth tooth width 15mm outside diameter 14mm SKU: 21411012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-12-teeth-tooth-width-15mm-outside-diameter-14mm-sku-21411012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 11 teeth tooth width 15mm outside diameter 13mm SKU: 21411011](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-11-teeth-tooth-width-15mm-outside-diameter-13mm-sku-21411011/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 110 teeth tooth width 10mm outside diameter 112mm SKU: 21411000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-110-teeth-tooth-width-10mm-outside-diameter-112mm-sku-21411000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 100 teeth tooth width 10mm outside diameter 102mm SKU: 21410000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-100-teeth-tooth-width-10mm-outside-diameter-102mm-sku-21410000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 95 teeth tooth width 10mm outside diameter 97mm SKU: 21409500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-95-teeth-tooth-width-10mm-outside-diameter-97mm-sku-21409500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 90 teeth tooth width 10mm outside diameter 92mm SKU: 21409000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-90-teeth-tooth-width-10mm-outside-diameter-92mm-sku-21409000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 87 teeth tooth width 10mm outside diameter 89mm SKU: 21408700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-87-teeth-tooth-width-10mm-outside-diameter-89mm-sku-21408700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 85 teeth tooth width 10mm outside diameter 87mm SKU: 21408500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-85-teeth-tooth-width-10mm-outside-diameter-87mm-sku-21408500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 83 teeth tooth width 10mm outside diameter 85mm SKU: 21408300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-83-teeth-tooth-width-10mm-outside-diameter-85mm-sku-21408300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 82 teeth tooth width 10mm outside diameter 84mm SKU: 21408200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-82-teeth-tooth-width-10mm-outside-diameter-84mm-sku-21408200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 80 teeth tooth width 10mm outside diameter 82mm SKU: 21408000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-80-teeth-tooth-width-10mm-outside-diameter-82mm-sku-21408000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 78 teeth tooth width 10mm outside diameter 80mm SKU: 21407800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-78-teeth-tooth-width-10mm-outside-diameter-80mm-sku-21407800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 76 teeth tooth width 10mm outside diameter 78mm SKU: 21407600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-76-teeth-tooth-width-10mm-outside-diameter-78mm-sku-21407600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 75 teeth tooth width 10mm outside diameter 77mm SKU: 21407500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-75-teeth-tooth-width-10mm-outside-diameter-77mm-sku-21407500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 74 teeth tooth width 10mm outside diameter 76mm SKU: 21407400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-74-teeth-tooth-width-10mm-outside-diameter-76mm-sku-21407400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 72 teeth tooth width 10mm outside diameter 74mm SKU: 21407200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-72-teeth-tooth-width-10mm-outside-diameter-74mm-sku-21407200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 70 teeth tooth width 10mm outside diameter 72mm SKU: 21407000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-70-teeth-tooth-width-10mm-outside-diameter-72mm-sku-21407000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 68 teeth tooth width 10mm outside diameter 70mm SKU: 21406800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-68-teeth-tooth-width-10mm-outside-diameter-70mm-sku-21406800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 65 teeth tooth width 10mm outside diameter 67mm SKU: 21406500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-65-teeth-tooth-width-10mm-outside-diameter-67mm-sku-21406500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 64 teeth tooth width 10mm outside diameter 66mm SKU: 21406400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-64-teeth-tooth-width-10mm-outside-diameter-66mm-sku-21406400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 62 teeth tooth width 10mm outside diameter 64mm SKU: 21406200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-62-teeth-tooth-width-10mm-outside-diameter-64mm-sku-21406200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 60 teeth tooth width 10mm outside diameter 62mm SKU: 21406000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-60-teeth-tooth-width-10mm-outside-diameter-62mm-sku-21406000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 58 teeth tooth width 10mm outside diameter 60mm SKU: 21405800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-58-teeth-tooth-width-10mm-outside-diameter-60mm-sku-21405800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 57 teeth tooth width 10mm outside diameter 59mm SKU: 21405700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-57-teeth-tooth-width-10mm-outside-diameter-59mm-sku-21405700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 56 teeth tooth width 10mm outside diameter 58mm SKU: 21405600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-56-teeth-tooth-width-10mm-outside-diameter-58mm-sku-21405600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 55 teeth tooth width 10mm outside diameter 57mm SKU: 21405500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-55-teeth-tooth-width-10mm-outside-diameter-57mm-sku-21405500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 54 teeth tooth width 10mm outside diameter 56mm SKU: 21405400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-54-teeth-tooth-width-10mm-outside-diameter-56mm-sku-21405400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 53 teeth tooth width 10mm outside diameter 55mm SKU: 21405300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-53-teeth-tooth-width-10mm-outside-diameter-55mm-sku-21405300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 52 teeth tooth width 10mm outside diameter 54mm SKU: 21405200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-52-teeth-tooth-width-10mm-outside-diameter-54mm-sku-21405200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 50 teeth tooth width 10mm outside diameter 52mm SKU: 21405000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-50-teeth-tooth-width-10mm-outside-diameter-52mm-sku-21405000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 49 teeth tooth width 10mm outside diameter 51mm SKU: 21404900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-49-teeth-tooth-width-10mm-outside-diameter-51mm-sku-21404900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 48 teeth tooth width 10mm outside diameter 50mm SKU: 21404800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-48-teeth-tooth-width-10mm-outside-diameter-50mm-sku-21404800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 47 teeth tooth width 10mm outside diameter 49mm SKU: 21404700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-47-teeth-tooth-width-10mm-outside-diameter-49mm-sku-21404700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 46 teeth tooth width 10mm outside diameter 48mm SKU: 21404600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-46-teeth-tooth-width-10mm-outside-diameter-48mm-sku-21404600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 45 teeth tooth width 10mm outside diameter 47mm SKU: 21404500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-45-teeth-tooth-width-10mm-outside-diameter-47mm-sku-21404500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 44 teeth tooth width 10mm outside diameter 46mm SKU: 21404400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-44-teeth-tooth-width-10mm-outside-diameter-46mm-sku-21404400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 43 teeth tooth width 10mm outside diameter 45mm SKU: 21404300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-43-teeth-tooth-width-10mm-outside-diameter-45mm-sku-21404300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 42 teeth tooth width 10mm outside diameter 44mm SKU: 21404200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-42-teeth-tooth-width-10mm-outside-diameter-44mm-sku-21404200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 41 teeth tooth width 10mm outside diameter 43mm SKU: 21404100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-41-teeth-tooth-width-10mm-outside-diameter-43mm-sku-21404100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 40 teeth tooth width 10mm outside diameter 42mm SKU: 21404000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-40-teeth-tooth-width-10mm-outside-diameter-42mm-sku-21404000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 39 teeth tooth width 10mm outside diameter 41mm SKU: 21403900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-39-teeth-tooth-width-10mm-outside-diameter-41mm-sku-21403900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 38 teeth tooth width 10mm outside diameter 40mm SKU: 21403800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-38-teeth-tooth-width-10mm-outside-diameter-40mm-sku-21403800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 37 teeth tooth width 10mm outside diameter 39mm SKU: 21403700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-37-teeth-tooth-width-10mm-outside-diameter-39mm-sku-21403700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 36 teeth tooth width 10mm outside diameter 38mm SKU: 21403600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-36-teeth-tooth-width-10mm-outside-diameter-38mm-sku-21403600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 35 teeth tooth width 10mm outside diameter 37mm SKU: 21403500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-35-teeth-tooth-width-10mm-outside-diameter-37mm-sku-21403500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 34 teeth tooth width 10mm outside diameter 36mm SKU: 21403400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-34-teeth-tooth-width-10mm-outside-diameter-36mm-sku-21403400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 33 teeth tooth width 10mm outside diameter 35mm SKU: 21403300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-33-teeth-tooth-width-10mm-outside-diameter-35mm-sku-21403300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 32 teeth tooth width 10mm outside diameter 34mm SKU: 21403200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-32-teeth-tooth-width-10mm-outside-diameter-34mm-sku-21403200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 31 teeth tooth width 10mm outside diameter 33mm SKU: 21403100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-31-teeth-tooth-width-10mm-outside-diameter-33mm-sku-21403100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 30 teeth tooth width 10mm outside diameter 32mm SKU: 21403000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-30-teeth-tooth-width-10mm-outside-diameter-32mm-sku-21403000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 29 teeth tooth width 10mm outside diameter 31mm SKU: 21402900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-29-teeth-tooth-width-10mm-outside-diameter-31mm-sku-21402900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 28 teeth tooth width 10mm outside diameter 30mm SKU: 21402800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-28-teeth-tooth-width-10mm-outside-diameter-30mm-sku-21402800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 27 teeth tooth width 10mm outside diameter 29mm SKU: 21402700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-27-teeth-tooth-width-10mm-outside-diameter-29mm-sku-21402700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 26 teeth tooth width 10mm outside diameter 28mm SKU: 21402600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-26-teeth-tooth-width-10mm-outside-diameter-28mm-sku-21402600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 25 teeth tooth width 10mm outside diameter 27mm SKU: 21402500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-teeth-tooth-width-10mm-outside-diameter-27mm-sku-21402500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 24 teeth tooth width 10mm outside diameter 26mm SKU: 21402400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-24-teeth-tooth-width-10mm-outside-diameter-26mm-sku-21402400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 23 teeth tooth width 10mm outside diameter 25mm SKU: 21402300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-23-teeth-tooth-width-10mm-outside-diameter-25mm-sku-21402300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 22 teeth tooth width 10mm outside diameter 24mm SKU: 21402200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-22-teeth-tooth-width-10mm-outside-diameter-24mm-sku-21402200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 21 teeth tooth width 10mm outside diameter 23mm SKU: 21402100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-21-teeth-tooth-width-10mm-outside-diameter-23mm-sku-21402100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 20 teeth tooth width 10mm outside diameter 22mm SKU: 21402000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-20-teeth-tooth-width-10mm-outside-diameter-22mm-sku-21402000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 19 teeth tooth width 10mm outside diameter 21mm SKU: 21401900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-19-teeth-tooth-width-10mm-outside-diameter-21mm-sku-21401900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 18 teeth tooth width 10mm outside diameter 20mm SKU: 21401800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-18-teeth-tooth-width-10mm-outside-diameter-20mm-sku-21401800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 17 teeth tooth width 10mm outside diameter 19mm SKU: 21401700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-17-teeth-tooth-width-10mm-outside-diameter-19mm-sku-21401700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 16 teeth tooth width 10mm outside diameter 18mm SKU: 21401600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-16-teeth-tooth-width-10mm-outside-diameter-18mm-sku-21401600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 15 teeth tooth width 10mm outside diameter 17mm SKU: 21401500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-15-teeth-tooth-width-10mm-outside-diameter-17mm-sku-21401500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 14 teeth tooth width 10mm outside diameter 16mm SKU: 21401400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-14-teeth-tooth-width-10mm-outside-diameter-16mm-sku-21401400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 13 teeth tooth width 10mm outside diameter 15mm SKU: 21401300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-13-teeth-tooth-width-10mm-outside-diameter-15mm-sku-21401300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 12 teeth tooth width 10mm outside diameter 14mm SKU: 21401200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-12-teeth-tooth-width-10mm-outside-diameter-14mm-sku-21401200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 11 teeth tooth width 10mm outside diameter 13mm SKU: 21401100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-11-teeth-tooth-width-10mm-outside-diameter-13mm-sku-21401100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 10 teeth tooth width 10mm outside diameter 12mm SKU: 21401000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-10-teeth-tooth-width-10mm-outside-diameter-12mm-sku-21401000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 120 teeth tooth width 6.5mm outside diameter 122mm SKU: 21312000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-120-teeth-tooth-width-6-5mm-outside-diameter-122mm-sku-21312000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 100 teeth tooth width 6.5mm outside diameter 102mm SKU: 21310000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-100-teeth-tooth-width-6-5mm-outside-diameter-102mm-sku-21310000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 90 teeth tooth width 6.5mm outside diameter 92mm SKU: 21309000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-90-teeth-tooth-width-6-5mm-outside-diameter-92mm-sku-21309000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 80 teeth tooth width 6.5mm outside diameter 82mm SKU: 21308000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-80-teeth-tooth-width-6-5mm-outside-diameter-82mm-sku-21308000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 75 teeth tooth width 6.5mm outside diameter 77mm SKU: 21307500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-75-teeth-tooth-width-6-5mm-outside-diameter-77mm-sku-21307500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 72 teeth tooth width 6.5mm outside diameter 74mm SKU: 21307200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-72-teeth-tooth-width-6-5mm-outside-diameter-74mm-sku-21307200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 70 teeth tooth width 6.5mm outside diameter 72mm SKU: 21307000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-70-teeth-tooth-width-6-5mm-outside-diameter-72mm-sku-21307000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 65 teeth tooth width 6.5mm outside diameter 67mm SKU: 21306500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-65-teeth-tooth-width-6-5mm-outside-diameter-67mm-sku-21306500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 64 teeth tooth width 6.5mm outside diameter 66mm SKU: 21306400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-64-teeth-tooth-width-6-5mm-outside-diameter-66mm-sku-21306400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 60 teeth tooth width 6.5mm outside diameter 62mm SKU: 21306000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-60-teeth-tooth-width-6-5mm-outside-diameter-62mm-sku-21306000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 54 teeth tooth width 6.5mm outside diameter 56mm SKU: 21305400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-54-teeth-tooth-width-6-5mm-outside-diameter-56mm-sku-21305400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Clamp collar single-split steel C45 black oxide finished bore 13mm with bolt DIN 912 12.9 SKU: 62311300](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-13mm-with-bolt-din-912-12-9-sku-62311300/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 12mm SKU: 62311299](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-12mm-sku-62311299/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 12mm with bolt DIN 912 12.9 type N SKU: 62311200N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-12mm-with-bolt-din-912-12-9-type-n-sku-62311200n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 12mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62311200K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-12mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62311200k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 12mm with adjustable clamp lever M4 x 12 length 30mm type GRK SKU: 62311200GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-12mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-type-grk-sku-62311200grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 12mm with bolt DIN 912 12.9 type GR SKU: 62311200GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-12mm-with-bolt-din-912-12-9-type-gr-sku-62311200gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 12mm with bolt DIN 912 12.9 type GA SKU: 62311200GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-12mm-with-bolt-din-912-12-9-type-ga-sku-62311200ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 12mm with bolt DIN 912 12.9 type B2 SKU: 62311200B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-12mm-with-bolt-din-912-12-9-type-b2-sku-62311200b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 12mm with bolt DIN 912 12.9 type B1 SKU: 62311200B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-12mm-with-bolt-din-912-12-9-type-b1-sku-62311200b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 12mm with bolt DIN 912 12.9 SKU: 62311200](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-12mm-with-bolt-din-912-12-9-sku-62311200/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 11mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62311100K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-11mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62311100k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 11mm with bolt DIN 912 12.9 SKU: 62311100](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-11mm-with-bolt-din-912-12-9-sku-62311100/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 10mm SKU: 62311099](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-10mm-sku-62311099/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 10mm with bolt DIN 912 12.9 type N SKU: 62311000N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-10mm-with-bolt-din-912-12-9-type-n-sku-62311000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 10mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62311000K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-10mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62311000k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 10mm with adjustable clamp lever M3 x 10 length 22mm type GRK SKU: 62311000GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-10mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-type-grk-sku-62311000grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 10mm with bolt DIN 912 12.9 type GR SKU: 62311000GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-10mm-with-bolt-din-912-12-9-type-gr-sku-62311000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 10mm with bolt DIN 912 12.9 type GA SKU: 62311000GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-10mm-with-bolt-din-912-12-9-type-ga-sku-62311000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 10mm with bolt DIN 912 12.9 type B2 SKU: 62311000B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-10mm-with-bolt-din-912-12-9-type-b2-sku-62311000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 10mm with bolt DIN 912 12.9 type B1 SKU: 62311000B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-10mm-with-bolt-din-912-12-9-type-b1-sku-62311000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 10mm with bolt DIN 912 12.9 SKU: 62311000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-10mm-with-bolt-din-912-12-9-sku-62311000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 9mm with bolt DIN 912 12.9 SKU: 62310900](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-9mm-with-bolt-din-912-12-9-sku-62310900/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 8mm with bolt DIN 912 12.9 type N SKU: 62310800N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-8mm-with-bolt-din-912-12-9-type-n-sku-62310800n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 8mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62310800K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-8mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62310800k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 8mm with bolt DIN 912 12.9 SKU: 62310800](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-8mm-with-bolt-din-912-12-9-sku-62310800/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 7mm with bolt DIN 912 12.9 SKU: 62310700](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-7mm-with-bolt-din-912-12-9-sku-62310700/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 6mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62310600K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-6mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62310600k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 6mm with bolt DIN 912 12.9 SKU: 62310600](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-6mm-with-bolt-din-912-12-9-sku-62310600/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 5mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62310500K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-5mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62310500k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 5mm with bolt DIN 912 12.9 SKU: 62310500](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-5mm-with-bolt-din-912-12-9-sku-62310500/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 4mm with bolt DIN 912 12.9 SKU: 62310400](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-4mm-with-bolt-din-912-12-9-sku-62310400/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 3mm with bolt DIN 912 12.9 SKU: 62310300](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-3mm-with-bolt-din-912-12-9-sku-62310300/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Shaft collar DIN 705 A bore 100mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623100006](https://maedler.in/product/shaft-collar-din-705-a-bore-100mm-set-screw-din-en-iso-4027-old-din-914-sku-623100006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 90mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623090006](https://maedler.in/product/shaft-collar-din-705-a-bore-90mm-set-screw-din-en-iso-4027-old-din-914-sku-623090006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 85mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623085006](https://maedler.in/product/shaft-collar-din-705-a-bore-85mm-set-screw-din-en-iso-4027-old-din-914-sku-623085006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 80mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623080006](https://maedler.in/product/shaft-collar-din-705-a-bore-80mm-set-screw-din-en-iso-4027-old-din-914-sku-623080006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 75mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623075006](https://maedler.in/product/shaft-collar-din-705-a-bore-75mm-set-screw-din-en-iso-4027-old-din-914-sku-623075006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 70mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623070006](https://maedler.in/product/shaft-collar-din-705-a-bore-70mm-set-screw-din-en-iso-4027-old-din-914-sku-623070006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 70mm set screw DIN EN 27434 (old DIN 553) SKU: 62307000](https://maedler.in/product/shaft-collar-din-705-a-bore-70mm-set-screw-din-en-27434-old-din-553-sku-62307000/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 65mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623065006](https://maedler.in/product/shaft-collar-din-705-a-bore-65mm-set-screw-din-en-iso-4027-old-din-914-sku-623065006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 65mm set screw DIN EN 27434 (old DIN 553) SKU: 62306500](https://maedler.in/product/shaft-collar-din-705-a-bore-65mm-set-screw-din-en-27434-old-din-553-sku-62306500/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 63mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623063006](https://maedler.in/product/shaft-collar-din-705-a-bore-63mm-set-screw-din-en-iso-4027-old-din-914-sku-623063006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 63mm set screw DIN EN 27434 (old DIN 553) SKU: 62306300](https://maedler.in/product/shaft-collar-din-705-a-bore-63mm-set-screw-din-en-27434-old-din-553-sku-62306300/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 60mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623060006](https://maedler.in/product/shaft-collar-din-705-a-bore-60mm-set-screw-din-en-iso-4027-old-din-914-sku-623060006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 60mm set screw DIN EN 27434 (old DIN 553) SKU: 62306000](https://maedler.in/product/shaft-collar-din-705-a-bore-60mm-set-screw-din-en-27434-old-din-553-sku-62306000/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 56mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623056006](https://maedler.in/product/shaft-collar-din-705-a-bore-56mm-set-screw-din-en-iso-4027-old-din-914-sku-623056006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 56mm set screw DIN EN 27434 (old DIN 553) SKU: 62305600](https://maedler.in/product/shaft-collar-din-705-a-bore-56mm-set-screw-din-en-27434-old-din-553-sku-62305600/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 55mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623055006](https://maedler.in/product/shaft-collar-din-705-a-bore-55mm-set-screw-din-en-iso-4027-old-din-914-sku-623055006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 55mm set screw DIN EN 27434 (old DIN 553) SKU: 62305500](https://maedler.in/product/shaft-collar-din-705-a-bore-55mm-set-screw-din-en-27434-old-din-553-sku-62305500/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 50mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623050006](https://maedler.in/product/shaft-collar-din-705-a-bore-50mm-set-screw-din-en-iso-4027-old-din-914-sku-623050006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 50mm set screw DIN EN 27434 (old DIN 553) SKU: 62305000](https://maedler.in/product/shaft-collar-din-705-a-bore-50mm-set-screw-din-en-27434-old-din-553-sku-62305000/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 48mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623048006](https://maedler.in/product/shaft-collar-din-705-a-bore-48mm-set-screw-din-en-iso-4027-old-din-914-sku-623048006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 48mm set screw DIN EN 27434 (old DIN 553) SKU: 62304800](https://maedler.in/product/shaft-collar-din-705-a-bore-48mm-set-screw-din-en-27434-old-din-553-sku-62304800/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 45mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623045006](https://maedler.in/product/shaft-collar-din-705-a-bore-45mm-set-screw-din-en-iso-4027-old-din-914-sku-623045006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 45mm set screw DIN EN 27434 (old DIN 553) SKU: 62304500](https://maedler.in/product/shaft-collar-din-705-a-bore-45mm-set-screw-din-en-27434-old-din-553-sku-62304500/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 42mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623042006](https://maedler.in/product/shaft-collar-din-705-a-bore-42mm-set-screw-din-en-iso-4027-old-din-914-sku-623042006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 42mm set screw DIN EN 27434 (old DIN 553) SKU: 62304200](https://maedler.in/product/shaft-collar-din-705-a-bore-42mm-set-screw-din-en-27434-old-din-553-sku-62304200/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 40mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623040006](https://maedler.in/product/shaft-collar-din-705-a-bore-40mm-set-screw-din-en-iso-4027-old-din-914-sku-623040006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 40mm set screw DIN EN 27434 (old DIN 553) SKU: 62304000](https://maedler.in/product/shaft-collar-din-705-a-bore-40mm-set-screw-din-en-27434-old-din-553-sku-62304000/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 38mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623038006](https://maedler.in/product/shaft-collar-din-705-a-bore-38mm-set-screw-din-en-iso-4027-old-din-914-sku-623038006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 38mm set screw DIN EN 27434 (old DIN 553) SKU: 62303800](https://maedler.in/product/shaft-collar-din-705-a-bore-38mm-set-screw-din-en-27434-old-din-553-sku-62303800/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 36mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623036006](https://maedler.in/product/shaft-collar-din-705-a-bore-36mm-set-screw-din-en-iso-4027-old-din-914-sku-623036006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 36mm set screw DIN EN 27434 (old DIN 553) SKU: 62303600](https://maedler.in/product/shaft-collar-din-705-a-bore-36mm-set-screw-din-en-27434-old-din-553-sku-62303600/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 35mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623035006](https://maedler.in/product/shaft-collar-din-705-a-bore-35mm-set-screw-din-en-iso-4027-old-din-914-sku-623035006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 35mm set screw DIN EN 27434 (old DIN 553) SKU: 62303500](https://maedler.in/product/shaft-collar-din-705-a-bore-35mm-set-screw-din-en-27434-old-din-553-sku-62303500/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 32mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623032006](https://maedler.in/product/shaft-collar-din-705-a-bore-32mm-set-screw-din-en-iso-4027-old-din-914-sku-623032006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 32mm set screw DIN EN 27434 (old DIN 553) SKU: 62303200](https://maedler.in/product/shaft-collar-din-705-a-bore-32mm-set-screw-din-en-27434-old-din-553-sku-62303200/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 30mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623030006](https://maedler.in/product/shaft-collar-din-705-a-bore-30mm-set-screw-din-en-iso-4027-old-din-914-sku-623030006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 30mm set screw DIN EN 27434 (old DIN 553) SKU: 62303000](https://maedler.in/product/shaft-collar-din-705-a-bore-30mm-set-screw-din-en-27434-old-din-553-sku-62303000/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 28mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623028006](https://maedler.in/product/shaft-collar-din-705-a-bore-28mm-set-screw-din-en-iso-4027-old-din-914-sku-623028006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 28mm set screw DIN EN 27434 (old DIN 553) SKU: 62302800](https://maedler.in/product/shaft-collar-din-705-a-bore-28mm-set-screw-din-en-27434-old-din-553-sku-62302800/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 26mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623026006](https://maedler.in/product/shaft-collar-din-705-a-bore-26mm-set-screw-din-en-iso-4027-old-din-914-sku-623026006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 26mm set screw DIN EN 27434 (old DIN 553) SKU: 62302600](https://maedler.in/product/shaft-collar-din-705-a-bore-26mm-set-screw-din-en-27434-old-din-553-sku-62302600/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 25mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623025006](https://maedler.in/product/shaft-collar-din-705-a-bore-25mm-set-screw-din-en-iso-4027-old-din-914-sku-623025006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 25mm set screw DIN EN 27434 (old DIN 553) SKU: 62302500](https://maedler.in/product/shaft-collar-din-705-a-bore-25mm-set-screw-din-en-27434-old-din-553-sku-62302500/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 24mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623024006](https://maedler.in/product/shaft-collar-din-705-a-bore-24mm-set-screw-din-en-iso-4027-old-din-914-sku-623024006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 24mm set screw DIN EN 27434 (old DIN 553) SKU: 62302400](https://maedler.in/product/shaft-collar-din-705-a-bore-24mm-set-screw-din-en-27434-old-din-553-sku-62302400/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 22mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623022006](https://maedler.in/product/shaft-collar-din-705-a-bore-22mm-set-screw-din-en-iso-4027-old-din-914-sku-623022006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 22mm set screw DIN EN 27434 (old DIN 553) SKU: 62302200](https://maedler.in/product/shaft-collar-din-705-a-bore-22mm-set-screw-din-en-27434-old-din-553-sku-62302200/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 20mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623020006](https://maedler.in/product/shaft-collar-din-705-a-bore-20mm-set-screw-din-en-iso-4027-old-din-914-sku-623020006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 20mm set screw DIN EN 27434 (old DIN 553) SKU: 62302000](https://maedler.in/product/shaft-collar-din-705-a-bore-20mm-set-screw-din-en-27434-old-din-553-sku-62302000/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 18mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623018006](https://maedler.in/product/shaft-collar-din-705-a-bore-18mm-set-screw-din-en-iso-4027-old-din-914-sku-623018006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 18mm set screw DIN EN 27434 (old DIN 553) SKU: 62301800](https://maedler.in/product/shaft-collar-din-705-a-bore-18mm-set-screw-din-en-27434-old-din-553-sku-62301800/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 16mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623016006](https://maedler.in/product/shaft-collar-din-705-a-bore-16mm-set-screw-din-en-iso-4027-old-din-914-sku-623016006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 16mm set screw DIN EN 27434 (old DIN 553) SKU: 62301600](https://maedler.in/product/shaft-collar-din-705-a-bore-16mm-set-screw-din-en-27434-old-din-553-sku-62301600/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 15mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623015006](https://maedler.in/product/shaft-collar-din-705-a-bore-15mm-set-screw-din-en-iso-4027-old-din-914-sku-623015006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 15mm set screw DIN EN 27434 (old DIN 553) SKU: 62301500](https://maedler.in/product/shaft-collar-din-705-a-bore-15mm-set-screw-din-en-27434-old-din-553-sku-62301500/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 14mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623014006](https://maedler.in/product/shaft-collar-din-705-a-bore-14mm-set-screw-din-en-iso-4027-old-din-914-sku-623014006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 14mm set screw DIN EN 27434 (old DIN 553) SKU: 62301400](https://maedler.in/product/shaft-collar-din-705-a-bore-14mm-set-screw-din-en-27434-old-din-553-sku-62301400/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 12mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623012006](https://maedler.in/product/shaft-collar-din-705-a-bore-12mm-set-screw-din-en-iso-4027-old-din-914-sku-623012006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 12mm set screw DIN EN 27434 (old DIN 553) SKU: 62301200](https://maedler.in/product/shaft-collar-din-705-a-bore-12mm-set-screw-din-en-27434-old-din-553-sku-62301200/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 11mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623011006](https://maedler.in/product/shaft-collar-din-705-a-bore-11mm-set-screw-din-en-iso-4027-old-din-914-sku-623011006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 11mm set screw DIN EN 27434 (old DIN 553) SKU: 62301100](https://maedler.in/product/shaft-collar-din-705-a-bore-11mm-set-screw-din-en-27434-old-din-553-sku-62301100/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 10mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623010006](https://maedler.in/product/shaft-collar-din-705-a-bore-10mm-set-screw-din-en-iso-4027-old-din-914-sku-623010006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 10mm set screw DIN EN 27434 (old DIN 553) SKU: 62301000](https://maedler.in/product/shaft-collar-din-705-a-bore-10mm-set-screw-din-en-27434-old-din-553-sku-62301000/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 9mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623009006](https://maedler.in/product/shaft-collar-din-705-a-bore-9mm-set-screw-din-en-iso-4027-old-din-914-sku-623009006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 9mm set screw DIN EN 27434 (old DIN 553) SKU: 62300900](https://maedler.in/product/shaft-collar-din-705-a-bore-9mm-set-screw-din-en-27434-old-din-553-sku-62300900/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 8mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623008006](https://maedler.in/product/shaft-collar-din-705-a-bore-8mm-set-screw-din-en-iso-4027-old-din-914-sku-623008006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 8mm set screw DIN EN 27434 (old DIN 553) SKU: 62300800](https://maedler.in/product/shaft-collar-din-705-a-bore-8mm-set-screw-din-en-27434-old-din-553-sku-62300800/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 7mm set screw DIN EN ISO 4027 (old DIN 914) SKU: 623007006](https://maedler.in/product/shaft-collar-din-705-a-bore-7mm-set-screw-din-en-iso-4027-old-din-914-sku-623007006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Spur gear made of steel C45 with hub module 1.5 32 teeth tooth width 10mm outside diameter 51mm SKU: 21703200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-32-teeth-tooth-width-10mm-outside-diameter-51mm-sku-21703200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 30 teeth tooth width 10mm outside diameter 48mm SKU: 21703000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-30-teeth-tooth-width-10mm-outside-diameter-48mm-sku-21703000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 28 teeth tooth width 10mm outside diameter 45mm SKU: 21702800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-28-teeth-tooth-width-10mm-outside-diameter-45mm-sku-21702800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 25 teeth tooth width 10mm outside diameter 40.5mm SKU: 21702500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-25-teeth-tooth-width-10mm-outside-diameter-40-5mm-sku-21702500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 24 teeth tooth width 10mm outside diameter 39mm SKU: 21702400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-24-teeth-tooth-width-10mm-outside-diameter-39mm-sku-21702400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 20 teeth tooth width 10mm outside diameter 33mm SKU: 21702000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-20-teeth-tooth-width-10mm-outside-diameter-33mm-sku-21702000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 18 teeth tooth width 10mm outside diameter 30mm SKU: 21701800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-18-teeth-tooth-width-10mm-outside-diameter-30mm-sku-21701800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 15 teeth tooth width 10mm outside diameter 25.5mm SKU: 21701500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-15-teeth-tooth-width-10mm-outside-diameter-25-5mm-sku-21701500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 12 teeth tooth width 10mm outside diameter 21mm SKU: 21701200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-12-teeth-tooth-width-10mm-outside-diameter-21mm-sku-21701200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 120 teeth tooth width 10mm outside diameter 152.5mm SKU: 21612000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-120-teeth-tooth-width-10mm-outside-diameter-152-5mm-sku-21612000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 100 teeth tooth width 10mm outside diameter 127.5mm SKU: 21610000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-100-teeth-tooth-width-10mm-outside-diameter-127-5mm-sku-21610000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 90 teeth tooth width 10mm outside diameter 115mm SKU: 21609000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-90-teeth-tooth-width-10mm-outside-diameter-115mm-sku-21609000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 85 teeth tooth width 10mm outside diameter 108.75mm SKU: 21608500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-85-teeth-tooth-width-10mm-outside-diameter-108-75mm-sku-21608500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 80 teeth tooth width 10mm outside diameter 102.5mm SKU: 21608000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-80-teeth-tooth-width-10mm-outside-diameter-102-5mm-sku-21608000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 76 teeth tooth width 10mm outside diameter 97.5mm SKU: 21607600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-76-teeth-tooth-width-10mm-outside-diameter-97-5mm-sku-21607600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 75 teeth tooth width 10mm outside diameter 96.25mm SKU: 21607500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-75-teeth-tooth-width-10mm-outside-diameter-96-25mm-sku-21607500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 72 teeth tooth width 10mm outside diameter 92.5mm SKU: 21607200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-72-teeth-tooth-width-10mm-outside-diameter-92-5mm-sku-21607200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 70 teeth tooth width 10mm outside diameter 90mm SKU: 21607000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-70-teeth-tooth-width-10mm-outside-diameter-90mm-sku-21607000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 65 teeth tooth width 10mm outside diameter 83.75mm SKU: 21606500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-65-teeth-tooth-width-10mm-outside-diameter-83-75mm-sku-21606500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 64 teeth tooth width 10mm outside diameter 82.5mm SKU: 21606400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-64-teeth-tooth-width-10mm-outside-diameter-82-5mm-sku-21606400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 60 teeth tooth width 10mm outside diameter 77.5mm SKU: 21606000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-60-teeth-tooth-width-10mm-outside-diameter-77-5mm-sku-21606000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 57 teeth tooth width 10mm outside diameter 73.75mm SKU: 21605700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-57-teeth-tooth-width-10mm-outside-diameter-73-75mm-sku-21605700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 56 teeth tooth width 10mm outside diameter 72.5mm SKU: 21605600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-56-teeth-tooth-width-10mm-outside-diameter-72-5mm-sku-21605600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 55 teeth tooth width 10mm outside diameter 71.25mm SKU: 21605500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-55-teeth-tooth-width-10mm-outside-diameter-71-25mm-sku-21605500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 54 teeth tooth width 10mm outside diameter 70mm SKU: 21605400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-54-teeth-tooth-width-10mm-outside-diameter-70mm-sku-21605400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 52 teeth tooth width 10mm outside diameter 67.5mm SKU: 21605200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-52-teeth-tooth-width-10mm-outside-diameter-67-5mm-sku-21605200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 50 teeth tooth width 10mm outside diameter 65mm SKU: 21605000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-50-teeth-tooth-width-10mm-outside-diameter-65mm-sku-21605000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 48 teeth tooth width 10mm outside diameter 62.5mm SKU: 21604800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-48-teeth-tooth-width-10mm-outside-diameter-62-5mm-sku-21604800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 45 teeth tooth width 10mm outside diameter 58.75mm SKU: 21604500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-45-teeth-tooth-width-10mm-outside-diameter-58-75mm-sku-21604500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 42 teeth tooth width 10mm outside diameter 55mm SKU: 21604200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-42-teeth-tooth-width-10mm-outside-diameter-55mm-sku-21604200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 40 teeth tooth width 10mm outside diameter 52.5mm SKU: 21604000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-40-teeth-tooth-width-10mm-outside-diameter-52-5mm-sku-21604000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 38 teeth tooth width 10mm outside diameter 50mm SKU: 21603800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-38-teeth-tooth-width-10mm-outside-diameter-50mm-sku-21603800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 37 teeth tooth width 10mm outside diameter 48.75mm SKU: 21603700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-37-teeth-tooth-width-10mm-outside-diameter-48-75mm-sku-21603700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 36 teeth tooth width 10mm outside diameter 47.5mm SKU: 21603600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-36-teeth-tooth-width-10mm-outside-diameter-47-5mm-sku-21603600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 35 teeth tooth width 10mm outside diameter 46.25mm SKU: 21603500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-35-teeth-tooth-width-10mm-outside-diameter-46-25mm-sku-21603500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 32 teeth tooth width 10mm outside diameter 42.5mm SKU: 21603200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-32-teeth-tooth-width-10mm-outside-diameter-42-5mm-sku-21603200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 30 teeth tooth width 10mm outside diameter 40mm SKU: 21603000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-30-teeth-tooth-width-10mm-outside-diameter-40mm-sku-21603000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 28 teeth tooth width 10mm outside diameter 37.5mm SKU: 21602800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-28-teeth-tooth-width-10mm-outside-diameter-37-5mm-sku-21602800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 27 teeth tooth width 10mm outside diameter 36.25mm SKU: 21602700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-27-teeth-tooth-width-10mm-outside-diameter-36-25mm-sku-21602700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 26 teeth tooth width 10mm outside diameter 35mm SKU: 21602600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-26-teeth-tooth-width-10mm-outside-diameter-35mm-sku-21602600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 25 teeth tooth width 10mm outside diameter 33.75mm SKU: 21602500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-25-teeth-tooth-width-10mm-outside-diameter-33-75mm-sku-21602500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 24 teeth tooth width 10mm outside diameter 32.5mm SKU: 21602400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-24-teeth-tooth-width-10mm-outside-diameter-32-5mm-sku-21602400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 23 teeth tooth width 10mm outside diameter 31.25mm SKU: 21602300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-23-teeth-tooth-width-10mm-outside-diameter-31-25mm-sku-21602300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 22 teeth tooth width 10mm outside diameter 30mm SKU: 21602200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-22-teeth-tooth-width-10mm-outside-diameter-30mm-sku-21602200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 21 teeth tooth width 10mm outside diameter 28.75mm SKU: 21602100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-21-teeth-tooth-width-10mm-outside-diameter-28-75mm-sku-21602100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 20 teeth tooth width 10mm outside diameter 27.5mm SKU: 21602000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-20-teeth-tooth-width-10mm-outside-diameter-27-5mm-sku-21602000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 19 teeth tooth width 10mm outside diameter 26.25mm SKU: 21601900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-19-teeth-tooth-width-10mm-outside-diameter-26-25mm-sku-21601900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 18 teeth tooth width 10mm outside diameter 25mm SKU: 21601800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-18-teeth-tooth-width-10mm-outside-diameter-25mm-sku-21601800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 17 teeth tooth width 10mm outside diameter 23.75mm SKU: 21601700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-17-teeth-tooth-width-10mm-outside-diameter-23-75mm-sku-21601700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 16 teeth tooth width 10mm outside diameter 22.5mm SKU: 21601600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-16-teeth-tooth-width-10mm-outside-diameter-22-5mm-sku-21601600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 15 teeth tooth width 10mm outside diameter 21.25mm SKU: 21601500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-15-teeth-tooth-width-10mm-outside-diameter-21-25mm-sku-21601500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 14 teeth tooth width 10mm outside diameter 20mm SKU: 21601400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-14-teeth-tooth-width-10mm-outside-diameter-20mm-sku-21601400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 13 teeth tooth width 10mm outside diameter 18.75mm SKU: 21601300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-13-teeth-tooth-width-10mm-outside-diameter-18-75mm-sku-21601300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.25 12 teeth tooth width 10mm outside diameter 17.5mm SKU: 21601200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-12-teeth-tooth-width-10mm-outside-diameter-17-5mm-sku-21601200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 120 teeth tooth width 10mm outside diameter 122mm SKU: 21412000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-120-teeth-tooth-width-10mm-outside-diameter-122mm-sku-21412000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 114 teeth tooth width 10mm outside diameter 116mm SKU: 21411400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-114-teeth-tooth-width-10mm-outside-diameter-116mm-sku-21411400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 120 teeth tooth width 15mm outside diameter 122mm SKU: 21411120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-120-teeth-tooth-width-15mm-outside-diameter-122mm-sku-21411120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 100 teeth tooth width 15mm outside diameter 102mm SKU: 21411100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-100-teeth-tooth-width-15mm-outside-diameter-102mm-sku-21411100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 90 teeth tooth width 15mm outside diameter 92mm SKU: 21411090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-90-teeth-tooth-width-15mm-outside-diameter-92mm-sku-21411090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 80 teeth tooth width 15mm outside diameter 82mm SKU: 21411080](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-80-teeth-tooth-width-15mm-outside-diameter-82mm-sku-21411080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 75 teeth tooth width 15mm outside diameter 77mm SKU: 21411075](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-75-teeth-tooth-width-15mm-outside-diameter-77mm-sku-21411075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 70 teeth tooth width 15mm outside diameter 72mm SKU: 21411070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-70-teeth-tooth-width-15mm-outside-diameter-72mm-sku-21411070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 69 teeth tooth width 15mm outside diameter 71mm SKU: 21411069](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-69-teeth-tooth-width-15mm-outside-diameter-71mm-sku-21411069/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 68 teeth tooth width 15mm outside diameter 70mm SKU: 21411068](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-68-teeth-tooth-width-15mm-outside-diameter-70mm-sku-21411068/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 67 teeth tooth width 15mm outside diameter 69mm SKU: 21411067](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-67-teeth-tooth-width-15mm-outside-diameter-69mm-sku-21411067/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 66 teeth tooth width 15mm outside diameter 68mm SKU: 21411066](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-66-teeth-tooth-width-15mm-outside-diameter-68mm-sku-21411066/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 65 teeth tooth width 15mm outside diameter 67mm SKU: 21411065](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-65-teeth-tooth-width-15mm-outside-diameter-67mm-sku-21411065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 64 teeth tooth width 15mm outside diameter 66mm SKU: 21411064](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-64-teeth-tooth-width-15mm-outside-diameter-66mm-sku-21411064/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 63 teeth tooth width 15mm outside diameter 65mm SKU: 21411063](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-63-teeth-tooth-width-15mm-outside-diameter-65mm-sku-21411063/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 62 teeth tooth width 15mm outside diameter 64mm SKU: 21411062](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-62-teeth-tooth-width-15mm-outside-diameter-64mm-sku-21411062/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 61 teeth tooth width 15mm outside diameter 63mm SKU: 21411061](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-61-teeth-tooth-width-15mm-outside-diameter-63mm-sku-21411061/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 60 teeth tooth width 15mm outside diameter 62mm SKU: 21411060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-60-teeth-tooth-width-15mm-outside-diameter-62mm-sku-21411060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 59 teeth tooth width 15mm outside diameter 61mm SKU: 21411059](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-teeth-tooth-width-15mm-outside-diameter-61mm-sku-21411059/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 58 teeth tooth width 15mm outside diameter 60mm SKU: 21411058](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-58-teeth-tooth-width-15mm-outside-diameter-60mm-sku-21411058/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 57 teeth tooth width 15mm outside diameter 59mm SKU: 21411057](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-57-teeth-tooth-width-15mm-outside-diameter-59mm-sku-21411057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 56 teeth tooth width 15mm outside diameter 58mm SKU: 21411056](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-56-teeth-tooth-width-15mm-outside-diameter-58mm-sku-21411056/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 55 teeth tooth width 15mm outside diameter 57mm SKU: 21411055](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-55-teeth-tooth-width-15mm-outside-diameter-57mm-sku-21411055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 54 teeth tooth width 15mm outside diameter 56mm SKU: 21411054](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-54-teeth-tooth-width-15mm-outside-diameter-56mm-sku-21411054/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 53 teeth tooth width 15mm outside diameter 55mm SKU: 21411053](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-53-teeth-tooth-width-15mm-outside-diameter-55mm-sku-21411053/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 52 teeth tooth width 15mm outside diameter 54mm SKU: 21411052](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-52-teeth-tooth-width-15mm-outside-diameter-54mm-sku-21411052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 51 teeth tooth width 15mm outside diameter 53mm SKU: 21411051](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-51-teeth-tooth-width-15mm-outside-diameter-53mm-sku-21411051/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 50 teeth tooth width 15mm outside diameter 52mm SKU: 21411050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-50-teeth-tooth-width-15mm-outside-diameter-52mm-sku-21411050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 49 teeth tooth width 15mm outside diameter 51mm SKU: 21411049](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-49-teeth-tooth-width-15mm-outside-diameter-51mm-sku-21411049/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 48 teeth tooth width 15mm outside diameter 50mm SKU: 21411048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-48-teeth-tooth-width-15mm-outside-diameter-50mm-sku-21411048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 47 teeth tooth width 15mm outside diameter 49mm SKU: 21411047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-47-teeth-tooth-width-15mm-outside-diameter-49mm-sku-21411047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 46 teeth tooth width 15mm outside diameter 48mm SKU: 21411046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-46-teeth-tooth-width-15mm-outside-diameter-48mm-sku-21411046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 45 teeth tooth width 15mm outside diameter 47mm SKU: 21411045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-45-teeth-tooth-width-15mm-outside-diameter-47mm-sku-21411045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 44 teeth tooth width 15mm outside diameter 46mm SKU: 21411044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-44-teeth-tooth-width-15mm-outside-diameter-46mm-sku-21411044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 43 teeth tooth width 15mm outside diameter 45mm SKU: 21411043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-43-teeth-tooth-width-15mm-outside-diameter-45mm-sku-21411043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 42 teeth tooth width 15mm outside diameter 44mm SKU: 21411042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-42-teeth-tooth-width-15mm-outside-diameter-44mm-sku-21411042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 41 teeth tooth width 15mm outside diameter 43mm SKU: 21411041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-41-teeth-tooth-width-15mm-outside-diameter-43mm-sku-21411041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 40 teeth tooth width 15mm outside diameter 42mm SKU: 21411040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-40-teeth-tooth-width-15mm-outside-diameter-42mm-sku-21411040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 39 teeth tooth width 15mm outside diameter 41mm SKU: 21411039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-39-teeth-tooth-width-15mm-outside-diameter-41mm-sku-21411039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 38 teeth tooth width 15mm outside diameter 40mm SKU: 21411038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-38-teeth-tooth-width-15mm-outside-diameter-40mm-sku-21411038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 37 teeth tooth width 15mm outside diameter 39mm SKU: 21411037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-37-teeth-tooth-width-15mm-outside-diameter-39mm-sku-21411037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 36 teeth tooth width 15mm outside diameter 38mm SKU: 21411036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-36-teeth-tooth-width-15mm-outside-diameter-38mm-sku-21411036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 35 teeth tooth width 15mm outside diameter 37mm SKU: 21411035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-35-teeth-tooth-width-15mm-outside-diameter-37mm-sku-21411035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 34 teeth tooth width 15mm outside diameter 36mm SKU: 21411034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-34-teeth-tooth-width-15mm-outside-diameter-36mm-sku-21411034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 33 teeth tooth width 15mm outside diameter 35mm SKU: 21411033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-33-teeth-tooth-width-15mm-outside-diameter-35mm-sku-21411033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 32 teeth tooth width 15mm outside diameter 34mm SKU: 21411032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-32-teeth-tooth-width-15mm-outside-diameter-34mm-sku-21411032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Clamp collar single-split steel C45 black oxide finished bore 38mm with bolt DIN 912 12.9 SKU: 62313800](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-38mm-with-bolt-din-912-12-9-sku-62313800/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 36mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62313600K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-36mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62313600k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 36mm with bolt DIN 912 12.9 SKU: 62313600](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-36mm-with-bolt-din-912-12-9-sku-62313600/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 35mm SKU: 62313599](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-35mm-sku-62313599/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 35mm with bolt DIN 912 12.9 type N SKU: 62313500N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-35mm-with-bolt-din-912-12-9-type-n-sku-62313500n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 35mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62313500K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-35mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62313500k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 35mm with adjustable clamp lever M6 x 18 length 45mm type GRK SKU: 62313500GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-35mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-type-grk-sku-62313500grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 35mm with bolt DIN 912 12.9 type GR SKU: 62313500GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-35mm-with-bolt-din-912-12-9-type-gr-sku-62313500gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 35mm with bolt DIN 912 12.9 type GA SKU: 62313500GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-35mm-with-bolt-din-912-12-9-type-ga-sku-62313500ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 35mm with bolt DIN 912 12.9 type B2 SKU: 62313500B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-35mm-with-bolt-din-912-12-9-type-b2-sku-62313500b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 35mm with bolt DIN 912 12.9 type B1 SKU: 62313500B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-35mm-with-bolt-din-912-12-9-type-b1-sku-62313500b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 35mm with bolt DIN 912 12.9 SKU: 62313500](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-35mm-with-bolt-din-912-12-9-sku-62313500/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 34mm with bolt DIN 912 12.9 SKU: 62313400](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-34mm-with-bolt-din-912-12-9-sku-62313400/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 32mm SKU: 62313299](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-32mm-sku-62313299/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 32mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62313200K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-32mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62313200k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 32mm with bolt DIN 912 12.9 type GR SKU: 62313200GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-32mm-with-bolt-din-912-12-9-type-gr-sku-62313200gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 32mm with bolt DIN 912 12.9 type GA SKU: 62313200GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-32mm-with-bolt-din-912-12-9-type-ga-sku-62313200ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 32mm with bolt DIN 912 12.9 type B2 SKU: 62313200B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-32mm-with-bolt-din-912-12-9-type-b2-sku-62313200b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 32mm with bolt DIN 912 12.9 type B1 SKU: 62313200B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-32mm-with-bolt-din-912-12-9-type-b1-sku-62313200b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 32mm with bolt DIN 912 12.9 SKU: 62313200](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-32mm-with-bolt-din-912-12-9-sku-62313200/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 30mm SKU: 62313099](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-30mm-sku-62313099/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 30mm with bolt DIN 912 12.9 type N SKU: 62313000N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-30mm-with-bolt-din-912-12-9-type-n-sku-62313000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 30mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62313000K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-30mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62313000k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 30mm with adjustable clamp lever M6 x 16 length 45mm type GRK SKU: 62313000GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-30mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-type-grk-sku-62313000grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 30mm with bolt DIN 912 12.9 type GR SKU: 62313000GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-30mm-with-bolt-din-912-12-9-type-gr-sku-62313000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 30mm with bolt DIN 912 12.9 type GA SKU: 62313000GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-30mm-with-bolt-din-912-12-9-type-ga-sku-62313000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 30mm with bolt DIN 912 12.9 type B2 SKU: 62313000B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-30mm-with-bolt-din-912-12-9-type-b2-sku-62313000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 30mm with bolt DIN 912 12.9 type B1 SKU: 62313000B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-30mm-with-bolt-din-912-12-9-type-b1-sku-62313000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 30mm with bolt DIN 912 12.9 SKU: 62313000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-30mm-with-bolt-din-912-12-9-sku-62313000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 28mm SKU: 62312899](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-28mm-sku-62312899/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 28mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62312800K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-28mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62312800k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 28mm with bolt DIN 912 12.9 type GR SKU: 62312800GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-28mm-with-bolt-din-912-12-9-type-gr-sku-62312800gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 28mm with bolt DIN 912 12.9 type GA SKU: 62312800GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-28mm-with-bolt-din-912-12-9-type-ga-sku-62312800ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 28mm with bolt DIN 912 12.9 type B2 SKU: 62312800B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-28mm-with-bolt-din-912-12-9-type-b2-sku-62312800b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 28mm with bolt DIN 912 12.9 type B1 SKU: 62312800B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-28mm-with-bolt-din-912-12-9-type-b1-sku-62312800b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 28mm with bolt DIN 912 12.9 SKU: 62312800](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-28mm-with-bolt-din-912-12-9-sku-62312800/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 26mm with bolt DIN 912 12.9 SKU: 62312600](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-26mm-with-bolt-din-912-12-9-sku-62312600/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 25mm SKU: 62312599](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-25mm-sku-62312599/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 25mm with bolt DIN 912 12.9 type N SKU: 62312500N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-25mm-with-bolt-din-912-12-9-type-n-sku-62312500n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 25mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62312500K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-25mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62312500k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 25mm with adjustable clamp lever M6 x 16 length 45mm type GRK SKU: 62312500GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-25mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-type-grk-sku-62312500grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 25mm with bolt DIN 912 12.9 type GR SKU: 62312500GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-25mm-with-bolt-din-912-12-9-type-gr-sku-62312500gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 25mm with bolt DIN 912 12.9 type GA SKU: 62312500GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-25mm-with-bolt-din-912-12-9-type-ga-sku-62312500ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 25mm with bolt DIN 912 12.9 type B2 SKU: 62312500B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-25mm-with-bolt-din-912-12-9-type-b2-sku-62312500b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 25mm with bolt DIN 912 12.9 type B1 SKU: 62312500B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-25mm-with-bolt-din-912-12-9-type-b1-sku-62312500b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 25mm with bolt DIN 912 12.9 SKU: 62312500](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-25mm-with-bolt-din-912-12-9-sku-62312500/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 24mm with bolt DIN 912 12.9 SKU: 62312400](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-24mm-with-bolt-din-912-12-9-sku-62312400/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 23mm with bolt DIN 912 12.9 SKU: 62312300](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-23mm-with-bolt-din-912-12-9-sku-62312300/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 22mm SKU: 62312299](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-22mm-sku-62312299/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 22mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62312200K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-22mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62312200k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 22mm with adjustable clamp lever M6 x 16 length 45mm type GRK SKU: 62312200GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-22mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-type-grk-sku-62312200grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 22mm with bolt DIN 912 12.9 type GR SKU: 62312200GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-22mm-with-bolt-din-912-12-9-type-gr-sku-62312200gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 22mm with bolt DIN 912 12.9 type GA SKU: 62312200GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-22mm-with-bolt-din-912-12-9-type-ga-sku-62312200ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 22mm with bolt DIN 912 12.9 type B2 SKU: 62312200B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-22mm-with-bolt-din-912-12-9-type-b2-sku-62312200b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 22mm with bolt DIN 912 12.9 type B1 SKU: 62312200B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-22mm-with-bolt-din-912-12-9-type-b1-sku-62312200b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 22mm with bolt DIN 912 12.9 SKU: 62312200](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-22mm-with-bolt-din-912-12-9-sku-62312200/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 21mm with bolt DIN 912 12.9 SKU: 62312100](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-21mm-with-bolt-din-912-12-9-sku-62312100/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 20mm SKU: 62312099](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-20mm-sku-62312099/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 20mm with bolt DIN 912 12.9 type N SKU: 62312000N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-20mm-with-bolt-din-912-12-9-type-n-sku-62312000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 20mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62312000K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-20mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62312000k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 20mm with adjustable clamp lever M6 x 16 length 45mm type GRK SKU: 62312000GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-20mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-type-grk-sku-62312000grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 20mm with bolt DIN 912 12.9 type GR SKU: 62312000GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-20mm-with-bolt-din-912-12-9-type-gr-sku-62312000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 20mm with bolt DIN 912 12.9 type GA SKU: 62312000GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-20mm-with-bolt-din-912-12-9-type-ga-sku-62312000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 20mm with bolt DIN 912 12.9 type B2 SKU: 62312000B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-20mm-with-bolt-din-912-12-9-type-b2-sku-62312000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 20mm with bolt DIN 912 12.9 type B1 SKU: 62312000B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-20mm-with-bolt-din-912-12-9-type-b1-sku-62312000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 20mm with bolt DIN 912 12.9 SKU: 62312000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-20mm-with-bolt-din-912-12-9-sku-62312000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 19mm with bolt DIN 912 12.9 SKU: 62311900](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-19mm-with-bolt-din-912-12-9-sku-62311900/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 18mm SKU: 62311899](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-18mm-sku-62311899/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 18mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62311800K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-18mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62311800k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 18mm with bolt DIN 912 12.9 type GR SKU: 62311800GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-18mm-with-bolt-din-912-12-9-type-gr-sku-62311800gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 18mm with bolt DIN 912 12.9 type GA SKU: 62311800GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-18mm-with-bolt-din-912-12-9-type-ga-sku-62311800ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 18mm with bolt DIN 912 12.9 type B2 SKU: 62311800B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-18mm-with-bolt-din-912-12-9-type-b2-sku-62311800b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 18mm with bolt DIN 912 12.9 type B1 SKU: 62311800B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-18mm-with-bolt-din-912-12-9-type-b1-sku-62311800b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 18mm with bolt DIN 912 12.9 SKU: 62311800](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-18mm-with-bolt-din-912-12-9-sku-62311800/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 17mm with bolt DIN 912 12.9 SKU: 62311700](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-17mm-with-bolt-din-912-12-9-sku-62311700/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 16mm SKU: 62311699](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-16mm-sku-62311699/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 16mm with bolt DIN 912 12.9 type N SKU: 62311600N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-16mm-with-bolt-din-912-12-9-type-n-sku-62311600n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 16mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62311600K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-16mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62311600k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 16mm with adjustable clamp lever M5 x 14 length 30mm type GRK SKU: 62311600GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-16mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-type-grk-sku-62311600grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 16mm with bolt DIN 912 12.9 type GR SKU: 62311600GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-16mm-with-bolt-din-912-12-9-type-gr-sku-62311600gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 16mm with bolt DIN 912 12.9 type GA SKU: 62311600GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-16mm-with-bolt-din-912-12-9-type-ga-sku-62311600ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 16mm with bolt DIN 912 12.9 type B2 SKU: 62311600B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-16mm-with-bolt-din-912-12-9-type-b2-sku-62311600b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 16mm with bolt DIN 912 12.9 type B1 SKU: 62311600B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-16mm-with-bolt-din-912-12-9-type-b1-sku-62311600b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 16mm with bolt DIN 912 12.9 SKU: 62311600](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-16mm-with-bolt-din-912-12-9-sku-62311600/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 15mm SKU: 62311599](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-15mm-sku-62311599/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 15mm with bolt DIN 912 12.9 type N SKU: 62311500N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-15mm-with-bolt-din-912-12-9-type-n-sku-62311500n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 15mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62311500K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-15mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62311500k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 15mm with adjustable clamp lever M5 x 14 length 30mm type GRK SKU: 62311500GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-15mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-type-grk-sku-62311500grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 15mm with bolt DIN 912 12.9 type GR SKU: 62311500GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-15mm-with-bolt-din-912-12-9-type-gr-sku-62311500gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 15mm with bolt DIN 912 12.9 type GA SKU: 62311500GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-15mm-with-bolt-din-912-12-9-type-ga-sku-62311500ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 15mm with bolt DIN 912 12.9 type B2 SKU: 62311500B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-15mm-with-bolt-din-912-12-9-type-b2-sku-62311500b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 15mm with bolt DIN 912 12.9 type B1 SKU: 62311500B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-15mm-with-bolt-din-912-12-9-type-b1-sku-62311500b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 15mm with bolt DIN 912 12.9 SKU: 62311500](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-15mm-with-bolt-din-912-12-9-sku-62311500/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 14mm SKU: 62311499](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-14mm-sku-62311499/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 14mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62311400K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-14mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62311400k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 14mm with bolt DIN 912 12.9 type GR SKU: 62311400GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-14mm-with-bolt-din-912-12-9-type-gr-sku-62311400gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 14mm with bolt DIN 912 12.9 type GA SKU: 62311400GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-14mm-with-bolt-din-912-12-9-type-ga-sku-62311400ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 14mm with bolt DIN 912 12.9 type B2 SKU: 62311400B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-14mm-with-bolt-din-912-12-9-type-b2-sku-62311400b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 14mm with bolt DIN 912 12.9 type B1 SKU: 62311400B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-14mm-with-bolt-din-912-12-9-type-b1-sku-62311400b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 14mm with bolt DIN 912 12.9 SKU: 62311400](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-14mm-with-bolt-din-912-12-9-sku-62311400/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Spur gear made of steel C45 with hub module 1.5 43 teeth tooth width 17mm outside diameter 67.5mm SKU: 21811043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-43-teeth-tooth-width-17mm-outside-diameter-67-5mm-sku-21811043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 42 teeth tooth width 17mm outside diameter 66mm SKU: 21811042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-42-teeth-tooth-width-17mm-outside-diameter-66mm-sku-21811042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 41 teeth tooth width 17mm outside diameter 64.5mm SKU: 21811041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-41-teeth-tooth-width-17mm-outside-diameter-64-5mm-sku-21811041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21811040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21811040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 39 teeth tooth width 17mm outside diameter 61.5mm SKU: 21811039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-39-teeth-tooth-width-17mm-outside-diameter-61-5mm-sku-21811039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 38 teeth tooth width 17mm outside diameter 60mm SKU: 21811038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-38-teeth-tooth-width-17mm-outside-diameter-60mm-sku-21811038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 37 teeth tooth width 17mm outside diameter 58.5mm SKU: 21811037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-37-teeth-tooth-width-17mm-outside-diameter-58-5mm-sku-21811037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21811036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21811036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 35 teeth tooth width 17mm outside diameter 55.5mm SKU: 21811035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-35-teeth-tooth-width-17mm-outside-diameter-55-5mm-sku-21811035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 34 teeth tooth width 17mm outside diameter 54mm SKU: 21811034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-34-teeth-tooth-width-17mm-outside-diameter-54mm-sku-21811034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 33 teeth tooth width 17mm outside diameter 52.5mm SKU: 21811033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-33-teeth-tooth-width-17mm-outside-diameter-52-5mm-sku-21811033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21811032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21811032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 31 teeth tooth width 17mm outside diameter 49.5mm SKU: 21811031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-31-teeth-tooth-width-17mm-outside-diameter-49-5mm-sku-21811031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21811030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21811030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 29 teeth tooth width 17mm outside diameter 46.5mm SKU: 21811029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-29-teeth-tooth-width-17mm-outside-diameter-46-5mm-sku-21811029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 28 teeth tooth width 17mm outside diameter 45mm SKU: 21811028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-28-teeth-tooth-width-17mm-outside-diameter-45mm-sku-21811028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 27 teeth tooth width 17mm outside diameter 43.5mm SKU: 21811027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-27-teeth-tooth-width-17mm-outside-diameter-43-5mm-sku-21811027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 26 teeth tooth width 17mm outside diameter 42mm SKU: 21811026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-26-teeth-tooth-width-17mm-outside-diameter-42mm-sku-21811026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21811025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21811025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 24 teeth tooth width 17mm outside diameter 39mm SKU: 21811024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-24-teeth-tooth-width-17mm-outside-diameter-39mm-sku-21811024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 23 teeth tooth width 17mm outside diameter 37.5mm SKU: 21811023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-23-teeth-tooth-width-17mm-outside-diameter-37-5mm-sku-21811023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 22 teeth tooth width 17mm outside diameter 36mm SKU: 21811022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-22-teeth-tooth-width-17mm-outside-diameter-36mm-sku-21811022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 21 teeth tooth width 17mm outside diameter 34.5mm SKU: 21811021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-21-teeth-tooth-width-17mm-outside-diameter-34-5mm-sku-21811021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 20 teeth tooth width 17mm outside diameter 33mm SKU: 21811020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-20-teeth-tooth-width-17mm-outside-diameter-33mm-sku-21811020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 19 teeth tooth width 17mm outside diameter 31.5mm SKU: 21811019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-19-teeth-tooth-width-17mm-outside-diameter-31-5mm-sku-21811019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 18 teeth tooth width 17mm outside diameter 30mm SKU: 21811018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-18-teeth-tooth-width-17mm-outside-diameter-30mm-sku-21811018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 17 teeth tooth width 17mm outside diameter 28.5mm SKU: 21811017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-17-teeth-tooth-width-17mm-outside-diameter-28-5mm-sku-21811017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 16 teeth tooth width 17mm outside diameter 27mm SKU: 21811016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-16-teeth-tooth-width-17mm-outside-diameter-27mm-sku-21811016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 15 teeth tooth width 17mm outside diameter 25.5mm SKU: 21811015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-15-teeth-tooth-width-17mm-outside-diameter-25-5mm-sku-21811015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 14 teeth tooth width 17mm outside diameter 24mm SKU: 21811014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-14-teeth-tooth-width-17mm-outside-diameter-24mm-sku-21811014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 13 teeth tooth width 17mm outside diameter 22.5mm SKU: 21811013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-13-teeth-tooth-width-17mm-outside-diameter-22-5mm-sku-21811013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 12 teeth tooth width 17mm outside diameter 21mm SKU: 21811012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-12-teeth-tooth-width-17mm-outside-diameter-21mm-sku-21811012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 11 teeth tooth width 17mm outside diameter 19.5mm SKU: 21811011](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-11-teeth-tooth-width-17mm-outside-diameter-19-5mm-sku-21811011/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 100 teeth tooth width 15mm outside diameter 153mm SKU: 21810000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-100-teeth-tooth-width-15mm-outside-diameter-153mm-sku-21810000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 95 teeth tooth width 15mm outside diameter 145.5mm SKU: 21809500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-95-teeth-tooth-width-15mm-outside-diameter-145-5mm-sku-21809500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 90 teeth tooth width 15mm outside diameter 138mm SKU: 21809000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-90-teeth-tooth-width-15mm-outside-diameter-138mm-sku-21809000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 85 teeth tooth width 15mm outside diameter 130.5mm SKU: 21808500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-85-teeth-tooth-width-15mm-outside-diameter-130-5mm-sku-21808500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 82 teeth tooth width 15mm outside diameter 126mm SKU: 21808200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-82-teeth-tooth-width-15mm-outside-diameter-126mm-sku-21808200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 80 teeth tooth width 15mm outside diameter 123mm SKU: 21808000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-123mm-sku-21808000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 78 teeth tooth width 15mm outside diameter 120mm SKU: 21807800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-78-teeth-tooth-width-15mm-outside-diameter-120mm-sku-21807800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 76 teeth tooth width 15mm outside diameter 117mm SKU: 21807600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-76-teeth-tooth-width-15mm-outside-diameter-117mm-sku-21807600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 75 teeth tooth width 15mm outside diameter 115.5mm SKU: 21807500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-75-teeth-tooth-width-15mm-outside-diameter-115-5mm-sku-21807500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 74 teeth tooth width 15mm outside diameter 114mm SKU: 21807400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-74-teeth-tooth-width-15mm-outside-diameter-114mm-sku-21807400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 72 teeth tooth width 15mm outside diameter 111mm SKU: 21807200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-72-teeth-tooth-width-15mm-outside-diameter-111mm-sku-21807200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 70 teeth tooth width 15mm outside diameter 108mm SKU: 21807000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-108mm-sku-21807000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 68 teeth tooth width 15mm outside diameter 105mm SKU: 21806800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-68-teeth-tooth-width-15mm-outside-diameter-105mm-sku-21806800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 65 teeth tooth width 15mm outside diameter 100.5mm SKU: 21806500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-65-teeth-tooth-width-15mm-outside-diameter-100-5mm-sku-21806500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 64 teeth tooth width 15mm outside diameter 99mm SKU: 21806400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-64-teeth-tooth-width-15mm-outside-diameter-99mm-sku-21806400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 63 teeth tooth width 15mm outside diameter 97.5mm SKU: 21806300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-63-teeth-tooth-width-15mm-outside-diameter-97-5mm-sku-21806300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 62 teeth tooth width 15mm outside diameter 96mm SKU: 21806200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-62-teeth-tooth-width-15mm-outside-diameter-96mm-sku-21806200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 60 teeth tooth width 15mm outside diameter 93mm SKU: 21806000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-93mm-sku-21806000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 58 teeth tooth width 15mm outside diameter 90mm SKU: 21805800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-58-teeth-tooth-width-15mm-outside-diameter-90mm-sku-21805800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 57 teeth tooth width 15mm outside diameter 88.5mm SKU: 21805700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-57-teeth-tooth-width-15mm-outside-diameter-88-5mm-sku-21805700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 56 teeth tooth width 15mm outside diameter 87mm SKU: 21805600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-56-teeth-tooth-width-15mm-outside-diameter-87mm-sku-21805600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 55 teeth tooth width 15mm outside diameter 85.5mm SKU: 21805500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-55-teeth-tooth-width-15mm-outside-diameter-85-5mm-sku-21805500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 54 teeth tooth width 15mm outside diameter 84mm SKU: 21805400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-54-teeth-tooth-width-15mm-outside-diameter-84mm-sku-21805400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 52 teeth tooth width 15mm outside diameter 81mm SKU: 21805200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-52-teeth-tooth-width-15mm-outside-diameter-81mm-sku-21805200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 50 teeth tooth width 15mm outside diameter 78mm SKU: 21805000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-78mm-sku-21805000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 48 teeth tooth width 15mm outside diameter 75mm SKU: 21804800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-75mm-sku-21804800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 46 teeth tooth width 15mm outside diameter 72mm SKU: 21804600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-46-teeth-tooth-width-15mm-outside-diameter-72mm-sku-21804600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 45 teeth tooth width 15mm outside diameter 70.5mm SKU: 21804500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-70-5mm-sku-21804500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 44 teeth tooth width 15mm outside diameter 69mm SKU: 21804400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-44-teeth-tooth-width-15mm-outside-diameter-69mm-sku-21804400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 42 teeth tooth width 15mm outside diameter 66mm SKU: 21804200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-42-teeth-tooth-width-15mm-outside-diameter-66mm-sku-21804200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 40 teeth tooth width 15mm outside diameter 63mm SKU: 21804000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-63mm-sku-21804000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 38 teeth tooth width 15mm outside diameter 60mm SKU: 21803800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-38-teeth-tooth-width-15mm-outside-diameter-60mm-sku-21803800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 36 teeth tooth width 15mm outside diameter 57mm SKU: 21803600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-36-teeth-tooth-width-15mm-outside-diameter-57mm-sku-21803600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 35 teeth tooth width 15mm outside diameter 55.5mm SKU: 21803500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-35-teeth-tooth-width-15mm-outside-diameter-55-5mm-sku-21803500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 34 teeth tooth width 15mm outside diameter 54mm SKU: 21803400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-34-teeth-tooth-width-15mm-outside-diameter-54mm-sku-21803400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 32 teeth tooth width 15mm outside diameter 51mm SKU: 21803200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-32-teeth-tooth-width-15mm-outside-diameter-51mm-sku-21803200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 31 teeth tooth width 15mm outside diameter 49.5mm SKU: 21803100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-31-teeth-tooth-width-15mm-outside-diameter-49-5mm-sku-21803100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 30 teeth tooth width 15mm outside diameter 48mm SKU: 21803000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-48mm-sku-21803000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 28 teeth tooth width 15mm outside diameter 45mm SKU: 21802800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-28-teeth-tooth-width-15mm-outside-diameter-45mm-sku-21802800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 27 teeth tooth width 15mm outside diameter 43.5mm SKU: 21802700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-27-teeth-tooth-width-15mm-outside-diameter-43-5mm-sku-21802700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 26 teeth tooth width 15mm outside diameter 42mm SKU: 21802600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-26-teeth-tooth-width-15mm-outside-diameter-42mm-sku-21802600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 25 teeth tooth width 15mm outside diameter 40.5mm SKU: 21802500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-40-5mm-sku-21802500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 24 teeth tooth width 15mm outside diameter 39mm SKU: 21802400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-24-teeth-tooth-width-15mm-outside-diameter-39mm-sku-21802400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 23 teeth tooth width 15mm outside diameter 37.5mm SKU: 21802300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-23-teeth-tooth-width-15mm-outside-diameter-37-5mm-sku-21802300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 22 teeth tooth width 15mm outside diameter 36mm SKU: 21802200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-22-teeth-tooth-width-15mm-outside-diameter-36mm-sku-21802200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 21 teeth tooth width 15mm outside diameter 34.5mm SKU: 21802100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-21-teeth-tooth-width-15mm-outside-diameter-34-5mm-sku-21802100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 20 teeth tooth width 15mm outside diameter 33mm SKU: 21802000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-20-teeth-tooth-width-15mm-outside-diameter-33mm-sku-21802000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 19 teeth tooth width 15mm outside diameter 31.5mm SKU: 21801900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-19-teeth-tooth-width-15mm-outside-diameter-31-5mm-sku-21801900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 18 teeth tooth width 15mm outside diameter 30mm SKU: 21801800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-18-teeth-tooth-width-15mm-outside-diameter-30mm-sku-21801800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 17 teeth tooth width 15mm outside diameter 28.5mm SKU: 21801700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-17-teeth-tooth-width-15mm-outside-diameter-28-5mm-sku-21801700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 16 teeth tooth width 15mm outside diameter 27mm SKU: 21801600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-16-teeth-tooth-width-15mm-outside-diameter-27mm-sku-21801600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 15 teeth tooth width 15mm outside diameter 25.5mm SKU: 21801500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-15-teeth-tooth-width-15mm-outside-diameter-25-5mm-sku-21801500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 14 teeth tooth width 15mm outside diameter 24mm SKU: 21801400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-14-teeth-tooth-width-15mm-outside-diameter-24mm-sku-21801400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 13 teeth tooth width 15mm outside diameter 22.5mm SKU: 21801300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-13-teeth-tooth-width-15mm-outside-diameter-22-5mm-sku-21801300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 12 teeth tooth width 15mm outside diameter 21mm SKU: 21801200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-12-teeth-tooth-width-15mm-outside-diameter-21mm-sku-21801200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 11 teeth tooth width 15mm outside diameter 19.5mm SKU: 21801100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-11-teeth-tooth-width-15mm-outside-diameter-19-5mm-sku-21801100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 80 teeth tooth width 10mm outside diameter 123mm SKU: 21708000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-80-teeth-tooth-width-10mm-outside-diameter-123mm-sku-21708000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 70 teeth tooth width 10mm outside diameter 108mm SKU: 21707000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-70-teeth-tooth-width-10mm-outside-diameter-108mm-sku-21707000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 65 teeth tooth width 10mm outside diameter 100.5mm SKU: 21706500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-65-teeth-tooth-width-10mm-outside-diameter-100-5mm-sku-21706500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 60 teeth tooth width 10mm outside diameter 93mm SKU: 21706000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-60-teeth-tooth-width-10mm-outside-diameter-93mm-sku-21706000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 55 teeth tooth width 10mm outside diameter 85.5mm SKU: 21705500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-55-teeth-tooth-width-10mm-outside-diameter-85-5mm-sku-21705500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 50 teeth tooth width 10mm outside diameter 78mm SKU: 21705000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-50-teeth-tooth-width-10mm-outside-diameter-78mm-sku-21705000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 48 teeth tooth width 10mm outside diameter 75mm SKU: 21704800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-48-teeth-tooth-width-10mm-outside-diameter-75mm-sku-21704800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 45 teeth tooth width 10mm outside diameter 70.5mm SKU: 21704500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-45-teeth-tooth-width-10mm-outside-diameter-70-5mm-sku-21704500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 42 teeth tooth width 10mm outside diameter 66mm SKU: 21704200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-42-teeth-tooth-width-10mm-outside-diameter-66mm-sku-21704200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 40 teeth tooth width 10mm outside diameter 63mm SKU: 21704000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-40-teeth-tooth-width-10mm-outside-diameter-63mm-sku-21704000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 35 teeth tooth width 10mm outside diameter 55.5mm SKU: 21703500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-35-teeth-tooth-width-10mm-outside-diameter-55-5mm-sku-21703500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 15mm outer diameter 19mm length 20mm SKU: 62333500](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-15mm-outer-diameter-19mm-length-20mm-sku-62333500/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 14mm outer diameter 20mm length 14mm SKU: 62333200](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-14mm-outer-diameter-20mm-length-14mm-sku-62333200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 14mm outer diameter 20mm length 12mm SKU: 62333105](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-14mm-outer-diameter-20mm-length-12mm-sku-62333105/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 14mm outer diameter 18mm length 22mm SKU: 62333100](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-14mm-outer-diameter-18mm-length-22mm-sku-62333100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 12mm outer diameter 18mm length 20mm SKU: 62332810](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-12mm-outer-diameter-18mm-length-20mm-sku-62332810/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 12mm outer diameter 18mm length 16mm SKU: 62332805](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-12mm-outer-diameter-18mm-length-16mm-sku-62332805/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 12mm outer diameter 18mm length 12mm SKU: 62332800](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-12mm-outer-diameter-18mm-length-12mm-sku-62332800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 12mm outer diameter 16mm length 12mm SKU: 62332700](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-12mm-outer-diameter-16mm-length-12mm-sku-62332700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 12mm outer diameter 15mm length 20mm SKU: 62332600](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-12mm-outer-diameter-15mm-length-20mm-sku-62332600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 12mm outer diameter 15mm length 12mm SKU: 62332500](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-12mm-outer-diameter-15mm-length-12mm-sku-62332500/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 10mm outer diameter 16mm length 10mm SKU: 62332300](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-10mm-outer-diameter-16mm-length-10mm-sku-62332300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 10mm outer diameter 14mm length 16mm SKU: 62332200](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-10mm-outer-diameter-14mm-length-16mm-sku-62332200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 10mm outer diameter 13mm length 10mm SKU: 62332100](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-10mm-outer-diameter-13mm-length-10mm-sku-62332100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 8mm outer diameter 12mm length 20mm SKU: 62331805](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-8mm-outer-diameter-12mm-length-20mm-sku-62331805/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 8mm outer diameter 12mm length 12mm SKU: 62331800](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-8mm-outer-diameter-12mm-length-12mm-sku-62331800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 8mm outer diameter 12mm length 8mm SKU: 62331700](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-8mm-outer-diameter-12mm-length-8mm-sku-62331700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 8mm outer diameter 11mm length 12mm SKU: 62331605](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-8mm-outer-diameter-11mm-length-12mm-sku-62331605/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 8mm outer diameter 11mm length 8mm SKU: 62331600](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-8mm-outer-diameter-11mm-length-8mm-sku-62331600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 6mm outer diameter 12mm length 6mm SKU: 62331315](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-6mm-outer-diameter-12mm-length-6mm-sku-62331315/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 6mm outer diameter 10mm length 16mm SKU: 62331310](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-6mm-outer-diameter-10mm-length-16mm-sku-62331310/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 6mm outer diameter 10mm length 12mm SKU: 62331305](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-6mm-outer-diameter-10mm-length-12mm-sku-62331305/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 6mm outer diameter 10mm length 10mm SKU: 62331300](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-6mm-outer-diameter-10mm-length-10mm-sku-62331300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 6mm outer diameter 10mm length 6mm SKU: 62331200](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-6mm-outer-diameter-10mm-length-6mm-sku-62331200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 6mm outer diameter 9mm length 16mm SKU: 62331110](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-6mm-outer-diameter-9mm-length-16mm-sku-62331110/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 6mm outer diameter 9mm length 12mm SKU: 62331105](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-6mm-outer-diameter-9mm-length-12mm-sku-62331105/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 6mm outer diameter 9mm length 10mm SKU: 62331100](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-6mm-outer-diameter-9mm-length-10mm-sku-62331100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 6mm outer diameter 9mm length 6mm SKU: 62330905](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-6mm-outer-diameter-9mm-length-6mm-sku-62330905/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 5mm outer diameter 8mm length 16mm SKU: 62330900](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-5mm-outer-diameter-8mm-length-16mm-sku-62330900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 5mm outer diameter 8mm length 10mm SKU: 62330800](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-5mm-outer-diameter-8mm-length-10mm-sku-62330800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 5mm outer diameter 8mm length 8mm SKU: 62330605](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-5mm-outer-diameter-8mm-length-8mm-sku-62330605/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 4mm outer diameter 8mm length 4mm SKU: 62330600](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-4mm-outer-diameter-8mm-length-4mm-sku-62330600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 4mm outer diameter 7mm length 4mm SKU: 62330400](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-4mm-outer-diameter-7mm-length-4mm-sku-62330400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 3mm outer diameter 6mm length 6mm SKU: 62330300](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-3mm-outer-diameter-6mm-length-6mm-sku-62330300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 3mm outer diameter 6mm length 4mm SKU: 62330200](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-3mm-outer-diameter-6mm-length-4mm-sku-62330200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Shaft collar DIN703 bore 90mm set screw 12.9 inner hexagon SKU: 62329000](https://maedler.in/product/shaft-collar-din703-bore-90mm-set-screw-12-9-inner-hexagon-sku-62329000/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 85mm set screw 12.9 inner hexagon SKU: 62328500](https://maedler.in/product/shaft-collar-din703-bore-85mm-set-screw-12-9-inner-hexagon-sku-62328500/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 80mm set screw 12.9 inner hexagon SKU: 62328000](https://maedler.in/product/shaft-collar-din703-bore-80mm-set-screw-12-9-inner-hexagon-sku-62328000/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 75mm set screw 12.9 inner hexagon SKU: 62327500](https://maedler.in/product/shaft-collar-din703-bore-75mm-set-screw-12-9-inner-hexagon-sku-62327500/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 70mm set screw 12.9 inner hexagon SKU: 62327000](https://maedler.in/product/shaft-collar-din703-bore-70mm-set-screw-12-9-inner-hexagon-sku-62327000/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 65mm set screw 12.9 inner hexagon SKU: 62326500](https://maedler.in/product/shaft-collar-din703-bore-65mm-set-screw-12-9-inner-hexagon-sku-62326500/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 60mm set screw 12.9 inner hexagon SKU: 62326000](https://maedler.in/product/shaft-collar-din703-bore-60mm-set-screw-12-9-inner-hexagon-sku-62326000/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 55mm set screw 12.9 inner hexagon SKU: 62325500](https://maedler.in/product/shaft-collar-din703-bore-55mm-set-screw-12-9-inner-hexagon-sku-62325500/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 50mm set screw 12.9 inner hexagon SKU: 62325000](https://maedler.in/product/shaft-collar-din703-bore-50mm-set-screw-12-9-inner-hexagon-sku-62325000/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 45mm set screw 12.9 inner hexagon SKU: 62324500](https://maedler.in/product/shaft-collar-din703-bore-45mm-set-screw-12-9-inner-hexagon-sku-62324500/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 40mm set screw 12.9 inner hexagon SKU: 62324000](https://maedler.in/product/shaft-collar-din703-bore-40mm-set-screw-12-9-inner-hexagon-sku-62324000/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 35mm set screw 12.9 inner hexagon SKU: 62323500](https://maedler.in/product/shaft-collar-din703-bore-35mm-set-screw-12-9-inner-hexagon-sku-62323500/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 30mm set screw 12.9 inner hexagon SKU: 62323000](https://maedler.in/product/shaft-collar-din703-bore-30mm-set-screw-12-9-inner-hexagon-sku-62323000/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 25mm set screw 12.9 inner hexagon SKU: 62322500](https://maedler.in/product/shaft-collar-din703-bore-25mm-set-screw-12-9-inner-hexagon-sku-62322500/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 20mm set screw 12.9 inner hexagon SKU: 62322000](https://maedler.in/product/shaft-collar-din703-bore-20mm-set-screw-12-9-inner-hexagon-sku-62322000/): Material: Steel, bright.Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Clamp collar single-split steel C45 black oxide finished bore 100mm with bolt DIN 912 12.9 SKU: 62320000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-100mm-with-bolt-din-912-12-9-sku-62320000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [SKF deep groove ball bearing single row inner diameter 3mm outer diameter 10mm width 4mm shielded on both sides SKU: 623-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-3mm-outer-diameter-10mm-width-4mm-shielded-on-both-sides-sku-623-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 3mm outer diameter 10mm width 4mm shielded on both sides clearance C3 SKU: 623-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-3mm-outer-diameter-10mm-width-4mm-shielded-on-both-sides-clearance-c3-sku-623-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 3mm outer diameter 10mm width 4mm sealed on both sides SKU: 623-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-3mm-outer-diameter-10mm-width-4mm-sealed-on-both-sides-sku-623-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Clamp collar single-split steel C45 black oxide finished bore 90mm with bolt DIN 912 12.9 SKU: 62319000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-90mm-with-bolt-din-912-12-9-sku-62319000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 80mm with bolt DIN 912 12.9 SKU: 62318000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-80mm-with-bolt-din-912-12-9-sku-62318000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 75mm with bolt DIN 912 12.9 SKU: 62317500](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-75mm-with-bolt-din-912-12-9-sku-62317500/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 70mm with bolt DIN 912 12.9 SKU: 62317000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-70mm-with-bolt-din-912-12-9-sku-62317000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 65mm with bolt DIN 912 12.9 SKU: 62316500](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-65mm-with-bolt-din-912-12-9-sku-62316500/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 60mm with bolt DIN 912 12.9 type N SKU: 62316000N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-60mm-with-bolt-din-912-12-9-type-n-sku-62316000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 60mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62316000K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-60mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62316000k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 60mm with bolt DIN 912 12.9 SKU: 62316000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-60mm-with-bolt-din-912-12-9-sku-62316000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 55mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62315500K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-55mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62315500k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 55mm with bolt DIN 912 12.9 SKU: 62315500](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-55mm-with-bolt-din-912-12-9-sku-62315500/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 50mm SKU: 62315099](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-50mm-sku-62315099/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 50mm with bolt DIN 912 12.9 type N SKU: 62315000N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-50mm-with-bolt-din-912-12-9-type-n-sku-62315000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 50mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62315000K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-50mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62315000k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 50mm with adjustable clamp lever M8 x 25 length 78mm type GRK SKU: 62315000GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-50mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-type-grk-sku-62315000grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 50mm with bolt DIN 912 12.9 type GR SKU: 62315000GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-50mm-with-bolt-din-912-12-9-type-gr-sku-62315000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 50mm with bolt DIN 912 12.9 type GA SKU: 62315000GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-50mm-with-bolt-din-912-12-9-type-ga-sku-62315000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 50mm with bolt DIN 912 12.9 type B2 SKU: 62315000B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-50mm-with-bolt-din-912-12-9-type-b2-sku-62315000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 50mm with bolt DIN 912 12.9 type B1 SKU: 62315000B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-50mm-with-bolt-din-912-12-9-type-b1-sku-62315000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 50mm with bolt DIN 912 12.9 SKU: 62315000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-50mm-with-bolt-din-912-12-9-sku-62315000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 48mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62314800K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-48mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62314800k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 48mm with bolt DIN 912 12.9 SKU: 62314800](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-48mm-with-bolt-din-912-12-9-sku-62314800/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 45mm SKU: 62314599](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-45mm-sku-62314599/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 45mm with bolt DIN 912 12.9 type N SKU: 62314500N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-45mm-with-bolt-din-912-12-9-type-n-sku-62314500n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 45mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62314500K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-45mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62314500k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 45mm with adjustable clamp lever M8 x 25 length 78mm type GRK SKU: 62314500GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-45mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-type-grk-sku-62314500grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 45mm with bolt DIN 912 12.9 type GR SKU: 62314500GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-45mm-with-bolt-din-912-12-9-type-gr-sku-62314500gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 45mm with bolt DIN 912 12.9 type GA SKU: 62314500GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-45mm-with-bolt-din-912-12-9-type-ga-sku-62314500ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 45mm with bolt DIN 912 12.9 type B2 SKU: 62314500B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-45mm-with-bolt-din-912-12-9-type-b2-sku-62314500b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 45mm with bolt DIN 912 12.9 type B1 SKU: 62314500B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-45mm-with-bolt-din-912-12-9-type-b1-sku-62314500b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 45mm with bolt DIN 912 12.9 SKU: 62314500](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-45mm-with-bolt-din-912-12-9-sku-62314500/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 42mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62314200K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-42mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62314200k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 42mm with bolt DIN 912 12.9 SKU: 62314200](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-42mm-with-bolt-din-912-12-9-sku-62314200/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Rubber pad for collars type B1 with bore 40mm SKU: 62314099](https://maedler.in/product/rubber-pad-for-collars-type-b1-with-bore-40mm-sku-62314099/): Material: Rubber NBR, black, 70º +/-5º Shore A. These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft. For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used. - [Clamp collar single-split steel C45 black oxide finished bore 40mm with bolt DIN 912 12.9 type N SKU: 62314000N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-40mm-with-bolt-din-912-12-9-type-n-sku-62314000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 40mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62314000K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-40mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62314000k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 40mm with adjustable clamp lever M6 x 18 length 45mm type GRK SKU: 62314000GRK](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-40mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-type-grk-sku-62314000grk/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split steel C45 black oxide finished bore 40mm with bolt DIN 912 12.9 type GR SKU: 62314000GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-40mm-with-bolt-din-912-12-9-type-gr-sku-62314000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 40mm with bolt DIN 912 12.9 type GA SKU: 62314000GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-40mm-with-bolt-din-912-12-9-type-ga-sku-62314000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 40mm with bolt DIN 912 12.9 type B2 SKU: 62314000B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-40mm-with-bolt-din-912-12-9-type-b2-sku-62314000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 40mm with bolt DIN 912 12.9 type B1 SKU: 62314000B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-40mm-with-bolt-din-912-12-9-type-b1-sku-62314000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 40mm with bolt DIN 912 12.9 SKU: 62314000](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-40mm-with-bolt-din-912-12-9-sku-62314000/): Material: Steel C45, black oxide finish. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 38mm with bolt DIN 912 12.9 type N SKU: 62313800N](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-38mm-with-bolt-din-912-12-9-type-n-sku-62313800n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 38mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62313800K](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-38mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62313800k/): Material: Steel C45, black oxide finish. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 black oxide finished bore 38mm with bolt DIN 912 12.9 type GR SKU: 62313800GR](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-38mm-with-bolt-din-912-12-9-type-gr-sku-62313800gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 38mm with bolt DIN 912 12.9 type GA SKU: 62313800GA](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-38mm-with-bolt-din-912-12-9-type-ga-sku-62313800ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 38mm with bolt DIN 912 12.9 type B2 SKU: 62313800B2](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-38mm-with-bolt-din-912-12-9-type-b2-sku-62313800b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar single-split steel C45 black oxide finished bore 38mm with bolt DIN 912 12.9 type B1 SKU: 62313800B1](https://maedler.in/product/clamp-collar-single-split-steel-c45-black-oxide-finished-bore-38mm-with-bolt-din-912-12-9-type-b1-sku-62313800b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Spur gear made of steel C45 without hub module 1 110 teeth tooth width 10mm outside diameter 112mm SKU: 22411000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-110-teeth-tooth-width-10mm-outside-diameter-112mm-sku-22411000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 105 teeth tooth width 10mm outside diameter 107mm SKU: 22410500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-105-teeth-tooth-width-10mm-outside-diameter-107mm-sku-22410500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 100 teeth tooth width 10mm outside diameter 102mm SKU: 22410000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-100-teeth-tooth-width-10mm-outside-diameter-102mm-sku-22410000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 96 teeth tooth width 10mm outside diameter 98mm SKU: 22409600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-96-teeth-tooth-width-10mm-outside-diameter-98mm-sku-22409600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 92 teeth tooth width 10mm outside diameter 94mm SKU: 22409200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-92-teeth-tooth-width-10mm-outside-diameter-94mm-sku-22409200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 90 teeth tooth width 10mm outside diameter 92mm SKU: 22409000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-90-teeth-tooth-width-10mm-outside-diameter-92mm-sku-22409000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 85 teeth tooth width 10mm outside diameter 87mm SKU: 22408500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-85-teeth-tooth-width-10mm-outside-diameter-87mm-sku-22408500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 84 teeth tooth width 10mm outside diameter 86mm SKU: 22408400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-84-teeth-tooth-width-10mm-outside-diameter-86mm-sku-22408400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 82 teeth tooth width 10mm outside diameter 84mm SKU: 22408200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-82-teeth-tooth-width-10mm-outside-diameter-84mm-sku-22408200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 80 teeth tooth width 10mm outside diameter 82mm SKU: 22408000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-80-teeth-tooth-width-10mm-outside-diameter-82mm-sku-22408000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 79 teeth tooth width 10mm outside diameter 81mm SKU: 22407900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-79-teeth-tooth-width-10mm-outside-diameter-81mm-sku-22407900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 78 teeth tooth width 10mm outside diameter 80mm SKU: 22407800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-78-teeth-tooth-width-10mm-outside-diameter-80mm-sku-22407800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 77 teeth tooth width 10mm outside diameter 79mm SKU: 22407700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-77-teeth-tooth-width-10mm-outside-diameter-79mm-sku-22407700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 76 teeth tooth width 10mm outside diameter 78mm SKU: 22407600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-76-teeth-tooth-width-10mm-outside-diameter-78mm-sku-22407600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 75 teeth tooth width 10mm outside diameter 77mm SKU: 22407500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-75-teeth-tooth-width-10mm-outside-diameter-77mm-sku-22407500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 73 teeth tooth width 10mm outside diameter 75mm SKU: 22407300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-73-teeth-tooth-width-10mm-outside-diameter-75mm-sku-22407300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 72 teeth tooth width 10mm outside diameter 74mm SKU: 22407200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-72-teeth-tooth-width-10mm-outside-diameter-74mm-sku-22407200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 71 teeth tooth width 10mm outside diameter 73mm SKU: 22407100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-71-teeth-tooth-width-10mm-outside-diameter-73mm-sku-22407100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 70 teeth tooth width 10mm outside diameter 72mm SKU: 22407000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-70-teeth-tooth-width-10mm-outside-diameter-72mm-sku-22407000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 69 teeth tooth width 10mm outside diameter 71mm SKU: 22406900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-69-teeth-tooth-width-10mm-outside-diameter-71mm-sku-22406900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 68 teeth tooth width 10mm outside diameter 70mm SKU: 22406800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-68-teeth-tooth-width-10mm-outside-diameter-70mm-sku-22406800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 67 teeth tooth width 10mm outside diameter 69mm SKU: 22406700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-67-teeth-tooth-width-10mm-outside-diameter-69mm-sku-22406700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 66 teeth tooth width 10mm outside diameter 68mm SKU: 22406600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-66-teeth-tooth-width-10mm-outside-diameter-68mm-sku-22406600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 65 teeth tooth width 10mm outside diameter 67mm SKU: 22406500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-65-teeth-tooth-width-10mm-outside-diameter-67mm-sku-22406500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 64 teeth tooth width 10mm outside diameter 66mm SKU: 22406400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-64-teeth-tooth-width-10mm-outside-diameter-66mm-sku-22406400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 63 teeth tooth width 10mm outside diameter 65mm SKU: 22406300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-63-teeth-tooth-width-10mm-outside-diameter-65mm-sku-22406300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 61 teeth tooth width 10mm outside diameter 63mm SKU: 22406100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-61-teeth-tooth-width-10mm-outside-diameter-63mm-sku-22406100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 60 teeth tooth width 10mm outside diameter 62mm SKU: 22406000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-60-teeth-tooth-width-10mm-outside-diameter-62mm-sku-22406000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 59 teeth tooth width 10mm outside diameter 61mm SKU: 22405900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-59-teeth-tooth-width-10mm-outside-diameter-61mm-sku-22405900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 56 teeth tooth width 10mm outside diameter 58mm SKU: 22405600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-56-teeth-tooth-width-10mm-outside-diameter-58mm-sku-22405600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 55 teeth tooth width 10mm outside diameter 57mm SKU: 22405500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-55-teeth-tooth-width-10mm-outside-diameter-57mm-sku-22405500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 54 teeth tooth width 10mm outside diameter 56mm SKU: 22405400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-54-teeth-tooth-width-10mm-outside-diameter-56mm-sku-22405400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 53 teeth tooth width 10mm outside diameter 55mm SKU: 22405300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-53-teeth-tooth-width-10mm-outside-diameter-55mm-sku-22405300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 52 teeth tooth width 10mm outside diameter 54mm SKU: 22405200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-52-teeth-tooth-width-10mm-outside-diameter-54mm-sku-22405200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 51 teeth tooth width 10mm outside diameter 53mm SKU: 22405100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-51-teeth-tooth-width-10mm-outside-diameter-53mm-sku-22405100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 50 teeth tooth width 10mm outside diameter 52mm SKU: 22405000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-50-teeth-tooth-width-10mm-outside-diameter-52mm-sku-22405000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 49 teeth tooth width 10mm outside diameter 51mm SKU: 22404900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-49-teeth-tooth-width-10mm-outside-diameter-51mm-sku-22404900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 48 teeth tooth width 10mm outside diameter 50mm SKU: 22404800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-48-teeth-tooth-width-10mm-outside-diameter-50mm-sku-22404800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 47 teeth tooth width 10mm outside diameter 49mm SKU: 22404700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-47-teeth-tooth-width-10mm-outside-diameter-49mm-sku-22404700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 46 teeth tooth width 10mm outside diameter 48mm SKU: 22404600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-46-teeth-tooth-width-10mm-outside-diameter-48mm-sku-22404600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 45 teeth tooth width 10mm outside diameter 47mm SKU: 22404500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-45-teeth-tooth-width-10mm-outside-diameter-47mm-sku-22404500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 44 teeth tooth width 10mm outside diameter 46mm SKU: 22404400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-44-teeth-tooth-width-10mm-outside-diameter-46mm-sku-22404400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 43 teeth tooth width 10mm outside diameter 45mm SKU: 22404300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-43-teeth-tooth-width-10mm-outside-diameter-45mm-sku-22404300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 42 teeth tooth width 10mm outside diameter 44mm SKU: 22404200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-42-teeth-tooth-width-10mm-outside-diameter-44mm-sku-22404200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 41 teeth tooth width 10mm outside diameter 43mm SKU: 22404100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-41-teeth-tooth-width-10mm-outside-diameter-43mm-sku-22404100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 40 teeth tooth width 10mm outside diameter 42mm SKU: 22404000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-40-teeth-tooth-width-10mm-outside-diameter-42mm-sku-22404000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 39 teeth tooth width 10mm outside diameter 41mm SKU: 22403900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-39-teeth-tooth-width-10mm-outside-diameter-41mm-sku-22403900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 38 teeth tooth width 10mm outside diameter 40mm SKU: 22403800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-38-teeth-tooth-width-10mm-outside-diameter-40mm-sku-22403800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 37 teeth tooth width 10mm outside diameter 39mm SKU: 22403700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-37-teeth-tooth-width-10mm-outside-diameter-39mm-sku-22403700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 36 teeth tooth width 10mm outside diameter 38mm SKU: 22403600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-36-teeth-tooth-width-10mm-outside-diameter-38mm-sku-22403600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 35 teeth tooth width 10mm outside diameter 37mm SKU: 22403500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-35-teeth-tooth-width-10mm-outside-diameter-37mm-sku-22403500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 34 teeth tooth width 10mm outside diameter 36mm SKU: 22403400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-34-teeth-tooth-width-10mm-outside-diameter-36mm-sku-22403400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 33 teeth tooth width 10mm outside diameter 35mm SKU: 22403300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-33-teeth-tooth-width-10mm-outside-diameter-35mm-sku-22403300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 32 teeth tooth width 10mm outside diameter 34mm SKU: 22403200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-32-teeth-tooth-width-10mm-outside-diameter-34mm-sku-22403200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 30 teeth tooth width 10mm outside diameter 32mm SKU: 22403000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-30-teeth-tooth-width-10mm-outside-diameter-32mm-sku-22403000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 28 teeth tooth width 10mm outside diameter 30mm SKU: 22402800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-28-teeth-tooth-width-10mm-outside-diameter-30mm-sku-22402800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 27 teeth tooth width 10mm outside diameter 29mm SKU: 22402700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-27-teeth-tooth-width-10mm-outside-diameter-29mm-sku-22402700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 26 teeth tooth width 10mm outside diameter 28mm SKU: 22402600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-26-teeth-tooth-width-10mm-outside-diameter-28mm-sku-22402600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 25 teeth tooth width 10mm outside diameter 27mm SKU: 22402500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-teeth-tooth-width-10mm-outside-diameter-27mm-sku-22402500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 24 teeth tooth width 10mm outside diameter 26mm SKU: 22402400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-24-teeth-tooth-width-10mm-outside-diameter-26mm-sku-22402400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 23 teeth tooth width 10mm outside diameter 25mm SKU: 22402300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-23-teeth-tooth-width-10mm-outside-diameter-25mm-sku-22402300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 22 teeth tooth width 10mm outside diameter 24mm SKU: 22402200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-22-teeth-tooth-width-10mm-outside-diameter-24mm-sku-22402200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 21 teeth tooth width 10mm outside diameter 23mm SKU: 22402100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-21-teeth-tooth-width-10mm-outside-diameter-23mm-sku-22402100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 20 teeth tooth width 10mm outside diameter 22mm SKU: 22402000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-20-teeth-tooth-width-10mm-outside-diameter-22mm-sku-22402000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 18 teeth tooth width 10mm outside diameter 20mm SKU: 22401800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-18-teeth-tooth-width-10mm-outside-diameter-20mm-sku-22401800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 120 teeth tooth width 15mm outside diameter 183mm SKU: 21812000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-120-teeth-tooth-width-15mm-outside-diameter-183mm-sku-21812000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 114 teeth tooth width 15mm outside diameter 174mm SKU: 21811400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-114-teeth-tooth-width-15mm-outside-diameter-174mm-sku-21811400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°.# - [Spur gear made of steel C45 with hub module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 21811120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-21811120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 100 teeth tooth width 17mm outside diameter 153mm SKU: 21811100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-100-teeth-tooth-width-17mm-outside-diameter-153mm-sku-21811100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 90 teeth tooth width 17mm outside diameter 138mm SKU: 21811090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-90-teeth-tooth-width-17mm-outside-diameter-138mm-sku-21811090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21811080](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21811080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 75 teeth tooth width 17mm outside diameter 115.5mm SKU: 21811075](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-75-teeth-tooth-width-17mm-outside-diameter-115-5mm-sku-21811075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 72 teeth tooth width 17mm outside diameter 111mm SKU: 21811072](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-72-teeth-tooth-width-17mm-outside-diameter-111mm-sku-21811072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 70 teeth tooth width 17mm outside diameter 108mm SKU: 21811070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-70-teeth-tooth-width-17mm-outside-diameter-108mm-sku-21811070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 69 teeth tooth width 17mm outside diameter 106.5mm SKU: 21811069](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-69-teeth-tooth-width-17mm-outside-diameter-106-5mm-sku-21811069/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 68 teeth tooth width 17mm outside diameter 105mm SKU: 21811068](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-68-teeth-tooth-width-17mm-outside-diameter-105mm-sku-21811068/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 67 teeth tooth width 17mm outside diameter 103.5mm SKU: 21811067](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-67-teeth-tooth-width-17mm-outside-diameter-103-5mm-sku-21811067/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 66 teeth tooth width 17mm outside diameter 102mm SKU: 21811066](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-66-teeth-tooth-width-17mm-outside-diameter-102mm-sku-21811066/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 65 teeth tooth width 17mm outside diameter 100.5mm SKU: 21811065](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-65-teeth-tooth-width-17mm-outside-diameter-100-5mm-sku-21811065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 64 teeth tooth width 17mm outside diameter 99mm SKU: 21811064](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-64-teeth-tooth-width-17mm-outside-diameter-99mm-sku-21811064/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 63 teeth tooth width 17mm outside diameter 97.5mm SKU: 21811063](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-63-teeth-tooth-width-17mm-outside-diameter-97-5mm-sku-21811063/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 62 teeth tooth width 17mm outside diameter 96mm SKU: 21811062](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-62-teeth-tooth-width-17mm-outside-diameter-96mm-sku-21811062/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 61 teeth tooth width 17mm outside diameter 94.5mm SKU: 21811061](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-61-teeth-tooth-width-17mm-outside-diameter-94-5mm-sku-21811061/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21811060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21811060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 59 teeth tooth width 17mm outside diameter 91.5mm SKU: 21811059](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-59-teeth-tooth-width-17mm-outside-diameter-91-5mm-sku-21811059/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 58 teeth tooth width 17mm outside diameter 90mm SKU: 21811058](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-58-teeth-tooth-width-17mm-outside-diameter-90mm-sku-21811058/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 57 teeth tooth width 17mm outside diameter 88.5mm SKU: 21811057](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-57-teeth-tooth-width-17mm-outside-diameter-88-5mm-sku-21811057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 56 teeth tooth width 17mm outside diameter 87mm SKU: 21811056](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-56-teeth-tooth-width-17mm-outside-diameter-87mm-sku-21811056/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 55 teeth tooth width 17mm outside diameter 85.5mm SKU: 21811055](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-55-teeth-tooth-width-17mm-outside-diameter-85-5mm-sku-21811055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 54 teeth tooth width 17mm outside diameter 84mm SKU: 21811054](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-54-teeth-tooth-width-17mm-outside-diameter-84mm-sku-21811054/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 53 teeth tooth width 17mm outside diameter 82.5mm SKU: 21811053](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-53-teeth-tooth-width-17mm-outside-diameter-82-5mm-sku-21811053/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 52 teeth tooth width 17mm outside diameter 81mm SKU: 21811052](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-52-teeth-tooth-width-17mm-outside-diameter-81mm-sku-21811052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 51 teeth tooth width 17mm outside diameter 79.5mm SKU: 21811051](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-51-teeth-tooth-width-17mm-outside-diameter-79-5mm-sku-21811051/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21811050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21811050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 49 teeth tooth width 17mm outside diameter 76.5mm SKU: 21811049](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-49-teeth-tooth-width-17mm-outside-diameter-76-5mm-sku-21811049/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 21811048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-21811048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 47 teeth tooth width 17mm outside diameter 73.5mm SKU: 21811047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-47-teeth-tooth-width-17mm-outside-diameter-73-5mm-sku-21811047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 46 teeth tooth width 17mm outside diameter 72mm SKU: 21811046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-46-teeth-tooth-width-17mm-outside-diameter-72mm-sku-21811046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21811045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21811045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 44 teeth tooth width 17mm outside diameter 69mm SKU: 21811044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-44-teeth-tooth-width-17mm-outside-diameter-69mm-sku-21811044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Clamp collar double-split steel C45 black oxide finished bore 14mm with bolts DIN 912 12.9 type B2 SKU: 62341400B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-14mm-with-bolts-din-912-12-9-type-b2-sku-62341400b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 14mm with bolts DIN 912 12.9 type B1 SKU: 62341400B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-14mm-with-bolts-din-912-12-9-type-b1-sku-62341400b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 14mm with bolts DIN 912 12.9 SKU: 62341400](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-14mm-with-bolts-din-912-12-9-sku-62341400/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 13mm with bolts DIN 912 12.9 SKU: 62341300](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-13mm-with-bolts-din-912-12-9-sku-62341300/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 12mm with bolts DIN 912 12.9 type N SKU: 62341200N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-12mm-with-bolts-din-912-12-9-type-n-sku-62341200n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 12mm with bolts DIN 912 12.9 type GR SKU: 62341200GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-12mm-with-bolts-din-912-12-9-type-gr-sku-62341200gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 12mm with bolts DIN 912 12.9 type GA SKU: 62341200GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-12mm-with-bolts-din-912-12-9-type-ga-sku-62341200ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 12mm with bolts DIN 912 12.9 type B2 SKU: 62341200B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-12mm-with-bolts-din-912-12-9-type-b2-sku-62341200b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 12mm with bolts DIN 912 12.9 type B1 SKU: 62341200B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-12mm-with-bolts-din-912-12-9-type-b1-sku-62341200b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 12mm with bolts DIN 912 12.9 SKU: 62341200](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-12mm-with-bolts-din-912-12-9-sku-62341200/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 11mm with bolts DIN 912 12.9 SKU: 62341100](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-11mm-with-bolts-din-912-12-9-sku-62341100/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 10mm with bolts DIN 912 12.9 type N SKU: 62341000N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-10mm-with-bolts-din-912-12-9-type-n-sku-62341000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 10mm with bolts DIN 912 12.9 type GR SKU: 62341000GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-10mm-with-bolts-din-912-12-9-type-gr-sku-62341000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 10mm with bolts DIN 912 12.9 type GA SKU: 62341000GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-10mm-with-bolts-din-912-12-9-type-ga-sku-62341000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 10mm with bolts DIN 912 12.9 type B2 SKU: 62341000B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-10mm-with-bolts-din-912-12-9-type-b2-sku-62341000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 10mm with bolts DIN 912 12.9 type B1 SKU: 62341000B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-10mm-with-bolts-din-912-12-9-type-b1-sku-62341000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 10mm with bolts DIN 912 12.9 SKU: 62341000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-10mm-with-bolts-din-912-12-9-sku-62341000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 9mm with bolts DIN 912 12.9 SKU: 62340900](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-9mm-with-bolts-din-912-12-9-sku-62340900/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 8mm with bolts DIN 912 12.9 type N SKU: 62340800N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-8mm-with-bolts-din-912-12-9-type-n-sku-62340800n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 8mm with bolts DIN 912 12.9 SKU: 62340800](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-8mm-with-bolts-din-912-12-9-sku-62340800/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 7mm with bolts DIN 912 12.9 SKU: 62340700](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-7mm-with-bolts-din-912-12-9-sku-62340700/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 6mm with bolts DIN 912 12.9 SKU: 62340600](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-6mm-with-bolts-din-912-12-9-sku-62340600/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 5mm with bolts DIN 912 12.9 SKU: 62340500](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-5mm-with-bolts-din-912-12-9-sku-62340500/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 4mm with bolts DIN 912 12.9 SKU: 62340400](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-4mm-with-bolts-din-912-12-9-sku-62340400/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 3mm with bolts DIN 912 12.9 SKU: 62340300](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-3mm-with-bolts-din-912-12-9-sku-62340300/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 100mm outer diameter 120mm length 120mm SKU: 62338902](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-100mm-outer-diameter-120mm-length-120mm-sku-62338902/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 100mm outer diameter 120mm length 80mm SKU: 62338900](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-100mm-outer-diameter-120mm-length-80mm-sku-62338900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 80mm outer diameter 100mm length 120mm SKU: 62338802](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-80mm-outer-diameter-100mm-length-120mm-sku-62338802/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 80mm outer diameter 100mm length 80mm SKU: 62338800](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-80mm-outer-diameter-100mm-length-80mm-sku-62338800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 70mm outer diameter 80mm length 120mm SKU: 62338702](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-70mm-outer-diameter-80mm-length-120mm-sku-62338702/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 70mm outer diameter 80mm length 90mm SKU: 62338700](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-70mm-outer-diameter-80mm-length-90mm-sku-62338700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 63mm outer diameter 70mm length 50mm SKU: 62338602](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-63mm-outer-diameter-70mm-length-50mm-sku-62338602/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 63mm outer diameter 70mm length 40mm SKU: 62338600](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-63mm-outer-diameter-70mm-length-40mm-sku-62338600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 60mm outer diameter 80mm length 120mm SKU: 62338502](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-60mm-outer-diameter-80mm-length-120mm-sku-62338502/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 60mm outer diameter 80mm length 90mm SKU: 62338500](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-60mm-outer-diameter-80mm-length-90mm-sku-62338500/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 60mm outer diameter 72mm length 70mm SKU: 62338404](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-60mm-outer-diameter-72mm-length-70mm-sku-62338404/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 60mm outer diameter 72mm length 60mm SKU: 62338402](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-60mm-outer-diameter-72mm-length-60mm-sku-62338402/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 60mm outer diameter 72mm length 50mm SKU: 62338400](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-60mm-outer-diameter-72mm-length-50mm-sku-62338400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 60mm outer diameter 70mm length 120mm SKU: 62338306](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-60mm-outer-diameter-70mm-length-120mm-sku-62338306/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 60mm outer diameter 70mm length 90mm SKU: 62338304](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-60mm-outer-diameter-70mm-length-90mm-sku-62338304/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 60mm outer diameter 70mm length 60mm SKU: 62338302](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-60mm-outer-diameter-70mm-length-60mm-sku-62338302/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 60mm outer diameter 70mm length 50mm SKU: 62338300](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-60mm-outer-diameter-70mm-length-50mm-sku-62338300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 55mm outer diameter 65mm length 70mm SKU: 62338204](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-55mm-outer-diameter-65mm-length-70mm-sku-62338204/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 55mm outer diameter 65mm length 55mm SKU: 62338202](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-55mm-outer-diameter-65mm-length-55mm-sku-62338202/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze bore 55mm outer diameter 65mm length 40mm SKU: 62338200](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-bore-55mm-outer-diameter-65mm-length-40mm-sku-62338200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 50mm outer diameter 60mm length 50mm SKU: 62338100](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-50mm-outer-diameter-60mm-length-50mm-sku-62338100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 50mm outer diameter 60mm length 40mm SKU: 62338005](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-50mm-outer-diameter-60mm-length-40mm-sku-62338005/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 50mm outer diameter 60mm length 32mm SKU: 62338000](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-50mm-outer-diameter-60mm-length-32mm-sku-62338000/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 50mm outer diameter 56mm length 50mm SKU: 62337905](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-50mm-outer-diameter-56mm-length-50mm-sku-62337905/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 50mm outer diameter 56mm length 32mm SKU: 62337900](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-50mm-outer-diameter-56mm-length-32mm-sku-62337900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 45mm outer diameter 56mm length 45mm SKU: 62337800](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-45mm-outer-diameter-56mm-length-45mm-sku-62337800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 45mm outer diameter 55mm length 45mm SKU: 62337700](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-45mm-outer-diameter-55mm-length-45mm-sku-62337700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 40mm outer diameter 50mm length 40mm SKU: 62337600](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-40mm-outer-diameter-50mm-length-40mm-sku-62337600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 40mm outer diameter 50mm length 25mm SKU: 62337500](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-40mm-outer-diameter-50mm-length-25mm-sku-62337500/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 40mm outer diameter 46mm length 40mm SKU: 62337405](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-40mm-outer-diameter-46mm-length-40mm-sku-62337405/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 40mm outer diameter 46mm length 32mm SKU: 62337400](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-40mm-outer-diameter-46mm-length-32mm-sku-62337400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 36mm outer diameter 45mm length 36mm SKU: 62337200](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-36mm-outer-diameter-45mm-length-36mm-sku-62337200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 35mm outer diameter 45mm length 35mm SKU: 62337100](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-35mm-outer-diameter-45mm-length-35mm-sku-62337100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 35mm outer diameter 44mm length 35mm SKU: 62337000](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-35mm-outer-diameter-44mm-length-35mm-sku-62337000/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 35mm outer diameter 44mm length 28mm SKU: 62336900](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-35mm-outer-diameter-44mm-length-28mm-sku-62336900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 32mm outer diameter 40mm length 32mm SKU: 62336700](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-32mm-outer-diameter-40mm-length-32mm-sku-62336700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 30mm outer diameter 40mm length 30mm SKU: 62336600](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-30mm-outer-diameter-40mm-length-30mm-sku-62336600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 30mm outer diameter 38mm length 40mm SKU: 62336505](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-30mm-outer-diameter-38mm-length-40mm-sku-62336505/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 30mm outer diameter 38mm length 30mm SKU: 62336500](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-30mm-outer-diameter-38mm-length-30mm-sku-62336500/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 30mm outer diameter 38mm length 24mm SKU: 62336400](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-30mm-outer-diameter-38mm-length-24mm-sku-62336400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 30mm outer diameter 38mm length 20mm SKU: 62336300](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-30mm-outer-diameter-38mm-length-20mm-sku-62336300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 28mm outer diameter 36mm length 28mm SKU: 62336200](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-28mm-outer-diameter-36mm-length-28mm-sku-62336200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 25mm outer diameter 32mm length 40mm SKU: 62336015](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-25mm-outer-diameter-32mm-length-40mm-sku-62336015/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 25mm outer diameter 32mm length 32mm SKU: 62336010](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-25mm-outer-diameter-32mm-length-32mm-sku-62336010/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 25mm outer diameter 32mm length 30mm SKU: 62336005](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-25mm-outer-diameter-32mm-length-30mm-sku-62336005/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 25mm outer diameter 32mm length 25mm SKU: 62336000](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-25mm-outer-diameter-32mm-length-25mm-sku-62336000/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 25mm outer diameter 32mm length 20mm SKU: 62335915](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-25mm-outer-diameter-32mm-length-20mm-sku-62335915/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 25mm outer diameter 30mm length 40mm SKU: 62335910](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-25mm-outer-diameter-30mm-length-40mm-sku-62335910/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 25mm outer diameter 30mm length 30mm SKU: 62335905](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-25mm-outer-diameter-30mm-length-30mm-sku-62335905/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 25mm outer diameter 30mm length 25mm SKU: 62335900](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-25mm-outer-diameter-30mm-length-25mm-sku-62335900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 25mm outer diameter 30mm length 20mm SKU: 62335800](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-25mm-outer-diameter-30mm-length-20mm-sku-62335800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 22mm outer diameter 28mm length 22mm SKU: 62335600](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-22mm-outer-diameter-28mm-length-22mm-sku-62335600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 28mm length 25mm SKU: 62335500](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-28mm-length-25mm-sku-62335500/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 26mm length 32mm SKU: 62335415](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-26mm-length-32mm-sku-62335415/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 26mm length 30mm SKU: 62335410](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-26mm-length-30mm-sku-62335410/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 26mm length 25mm SKU: 62335405](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-26mm-length-25mm-sku-62335405/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 26mm length 20mm SKU: 62335400](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-26mm-length-20mm-sku-62335400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 25mm length 30mm SKU: 62335305](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-25mm-length-30mm-sku-62335305/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 25mm length 25mm SKU: 62335300](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-25mm-length-25mm-sku-62335300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 25mm length 20mm SKU: 62335205](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-25mm-length-20mm-sku-62335205/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 25mm length 16mm SKU: 62335200](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-25mm-length-16mm-sku-62335200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 20mm outer diameter 24mm length 32mm SKU: 62335100](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-20mm-outer-diameter-24mm-length-32mm-sku-62335100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 18mm outer diameter 25mm length 18mm SKU: 62334900](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-18mm-outer-diameter-25mm-length-18mm-sku-62334900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 18mm outer diameter 24mm length 28mm SKU: 62334800](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-18mm-outer-diameter-24mm-length-28mm-sku-62334800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 18mm outer diameter 24mm length 18mm SKU: 62334700](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-18mm-outer-diameter-24mm-length-18mm-sku-62334700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 18mm outer diameter 22mm length 18mm SKU: 62334600](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-18mm-outer-diameter-22mm-length-18mm-sku-62334600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 16mm outer diameter 22mm length 30mm SKU: 62334305](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-16mm-outer-diameter-22mm-length-30mm-sku-62334305/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 16mm outer diameter 22mm length 25mm SKU: 62334303](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-16mm-outer-diameter-22mm-length-25mm-sku-62334303/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 16mm outer diameter 22mm length 20mm SKU: 62334300](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-16mm-outer-diameter-22mm-length-20mm-sku-62334300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 16mm outer diameter 22mm length 16mm SKU: 62334200](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-16mm-outer-diameter-22mm-length-16mm-sku-62334200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 16mm outer diameter 20mm length 32mm SKU: 62334105](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-16mm-outer-diameter-20mm-length-32mm-sku-62334105/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 16mm outer diameter 20mm length 25mm SKU: 62334100](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-16mm-outer-diameter-20mm-length-25mm-sku-62334100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 16mm outer diameter 20mm length 20mm SKU: 62334000](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-16mm-outer-diameter-20mm-length-20mm-sku-62334000/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 16mm outer diameter 20mm length 16mm SKU: 62333900](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-16mm-outer-diameter-20mm-length-16mm-sku-62333900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Bush similar to DIN 1850 J (DIN 4379 C) sintered bronze borehole 15mm outer diameter 21mm length 16mm SKU: 62333600](https://maedler.in/product/bush-similar-to-din-1850-j-din-4379-c-sintered-bronze-borehole-15mm-outer-diameter-21mm-length-16mm-sku-62333600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and kalibrated. After press-fitting them into a rigid bearing housing with a mounting hole H7, these bearings have a bore tolerance H7, at d1 > 70 mm they have a bore tolerance H8. Edges chamfered at 45º, at choice of the manufacturer. Concentricity tolerance IT9, at d1 > 50 mm: tolerance IT10. No statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. - [Spur gear made of steel C45 without hub module 1.5 65 teeth tooth width 15mm outside diameter 100.5mm SKU: 22806500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-65-teeth-tooth-width-15mm-outside-diameter-100-5mm-sku-22806500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 64 teeth tooth width 15mm outside diameter 99mm SKU: 22806400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-64-teeth-tooth-width-15mm-outside-diameter-99mm-sku-22806400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 60 teeth tooth width 15mm outside diameter 93mm SKU: 22806000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-93mm-sku-22806000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 56 teeth tooth width 15mm outside diameter 87mm SKU: 22805600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-56-teeth-tooth-width-15mm-outside-diameter-87mm-sku-22805600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 55 teeth tooth width 15mm outside diameter 85.5mm SKU: 22805500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-55-teeth-tooth-width-15mm-outside-diameter-85-5mm-sku-22805500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 54 teeth tooth width 15mm outside diameter 84mm SKU: 22805400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-54-teeth-tooth-width-15mm-outside-diameter-84mm-sku-22805400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 53 teeth tooth width 15mm outside diameter 82.5mm SKU: 22805300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-53-teeth-tooth-width-15mm-outside-diameter-82-5mm-sku-22805300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 52 teeth tooth width 15mm outside diameter 81mm SKU: 22805200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-52-teeth-tooth-width-15mm-outside-diameter-81mm-sku-22805200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 51 teeth tooth width 15mm outside diameter 79.5mm SKU: 22805100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-51-teeth-tooth-width-15mm-outside-diameter-79-5mm-sku-22805100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 50 teeth tooth width 15mm outside diameter 78mm SKU: 22805000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-78mm-sku-22805000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 48 teeth tooth width 15mm outside diameter 75mm SKU: 22804800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-75mm-sku-22804800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 47 teeth tooth width 15mm outside diameter 73.5mm SKU: 22804700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-47-teeth-tooth-width-15mm-outside-diameter-73-5mm-sku-22804700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 45 teeth tooth width 15mm outside diameter 70.5mm SKU: 22804500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-70-5mm-sku-22804500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 43 teeth tooth width 15mm outside diameter 67.5mm SKU: 22804300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-43-teeth-tooth-width-15mm-outside-diameter-67-5mm-sku-22804300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 41 teeth tooth width 15mm outside diameter 64.5mm SKU: 22804100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-41-teeth-tooth-width-15mm-outside-diameter-64-5mm-sku-22804100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 without hub module 1.5 40 teeth tooth width 15mm outside diameter 63mm SKU: 22804000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-without-hub-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-63mm-sku-22804000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 39 teeth tooth width 15mm outside diameter 61.5mm SKU: 22803900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-39-teeth-tooth-width-15mm-outside-diameter-61-5mm-sku-22803900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 38 teeth tooth width 15mm outside diameter 60mm SKU: 22803800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-38-teeth-tooth-width-15mm-outside-diameter-60mm-sku-22803800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 37 teeth tooth width 15mm outside diameter 58.5mm SKU: 22803700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-37-teeth-tooth-width-15mm-outside-diameter-58-5mm-sku-22803700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 36 teeth tooth width 15mm outside diameter 57mm SKU: 22803600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-36-teeth-tooth-width-15mm-outside-diameter-57mm-sku-22803600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 35 teeth tooth width 15mm outside diameter 55.5mm SKU: 22803500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-35-teeth-tooth-width-15mm-outside-diameter-55-5mm-sku-22803500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 33 teeth tooth width 15mm outside diameter 52.5mm SKU: 22803300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-33-teeth-tooth-width-15mm-outside-diameter-52-5mm-sku-22803300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 32 teeth tooth width 15mm outside diameter 51mm SKU: 22803200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-32-teeth-tooth-width-15mm-outside-diameter-51mm-sku-22803200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 30 teeth tooth width 15mm outside diameter 48mm SKU: 22803000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-48mm-sku-22803000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 29 teeth tooth width 15mm outside diameter 46.5mm SKU: 22802900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-29-teeth-tooth-width-15mm-outside-diameter-46-5mm-sku-22802900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 28 teeth tooth width 15mm outside diameter 45mm SKU: 22802800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-28-teeth-tooth-width-15mm-outside-diameter-45mm-sku-22802800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 27 teeth tooth width 15mm outside diameter 43.5mm SKU: 22802700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-27-teeth-tooth-width-15mm-outside-diameter-43-5mm-sku-22802700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 26 teeth tooth width 15mm outside diameter 42mm SKU: 22802600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-26-teeth-tooth-width-15mm-outside-diameter-42mm-sku-22802600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 25 teeth tooth width 15mm outside diameter 40.5mm SKU: 22802500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-40-5mm-sku-22802500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 24 teeth tooth width 15mm outside diameter 39mm SKU: 22802400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-24-teeth-tooth-width-15mm-outside-diameter-39mm-sku-22802400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 23 teeth tooth width 15mm outside diameter 37.5mm SKU: 22802300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-23-teeth-tooth-width-15mm-outside-diameter-37-5mm-sku-22802300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 21 teeth tooth width 15mm outside diameter 34.5mm SKU: 22802100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-21-teeth-tooth-width-15mm-outside-diameter-34-5mm-sku-22802100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 20 teeth tooth width 15mm outside diameter 33mm SKU: 22802000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-20-teeth-tooth-width-15mm-outside-diameter-33mm-sku-22802000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 18 teeth tooth width 15mm outside diameter 30mm SKU: 22801800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-18-teeth-tooth-width-15mm-outside-diameter-30mm-sku-22801800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 120 teeth tooth width 10mm outside diameter 152.5mm SKU: 22612000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-120-teeth-tooth-width-10mm-outside-diameter-152-5mm-sku-22612000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 114 teeth tooth width 10mm outside diameter 145mm SKU: 22611400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-114-teeth-tooth-width-10mm-outside-diameter-145mm-sku-22611400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 100 teeth tooth width 10mm outside diameter 127.5mm SKU: 22610000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-100-teeth-tooth-width-10mm-outside-diameter-127-5mm-sku-22610000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 95 teeth tooth width 10mm outside diameter 121.25mm SKU: 22609500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-95-teeth-tooth-width-10mm-outside-diameter-121-25mm-sku-22609500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 90 teeth tooth width 10mm outside diameter 115mm SKU: 22609000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-90-teeth-tooth-width-10mm-outside-diameter-115mm-sku-22609000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 80 teeth tooth width 10mm outside diameter 102.5mm SKU: 22608000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-80-teeth-tooth-width-10mm-outside-diameter-102-5mm-sku-22608000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 75 teeth tooth width 10mm outside diameter 96.25mm SKU: 22607500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-75-teeth-tooth-width-10mm-outside-diameter-96-25mm-sku-22607500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 72 teeth tooth width 10mm outside diameter 92.5mm SKU: 22607200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-72-teeth-tooth-width-10mm-outside-diameter-92-5mm-sku-22607200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 70 teeth tooth width 10mm outside diameter 90mm SKU: 22607000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-70-teeth-tooth-width-10mm-outside-diameter-90mm-sku-22607000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 64 teeth tooth width 10mm outside diameter 82.5mm SKU: 22606400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-64-teeth-tooth-width-10mm-outside-diameter-82-5mm-sku-22606400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 60 teeth tooth width 10mm outside diameter 77.5mm SKU: 22606000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-60-teeth-tooth-width-10mm-outside-diameter-77-5mm-sku-22606000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 56 teeth tooth width 10mm outside diameter 72.5mm SKU: 22605600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-56-teeth-tooth-width-10mm-outside-diameter-72-5mm-sku-22605600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 55 teeth tooth width 10mm outside diameter 71.25mm SKU: 22605500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-55-teeth-tooth-width-10mm-outside-diameter-71-25mm-sku-22605500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 54 teeth tooth width 10mm outside diameter 70mm SKU: 22605400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-54-teeth-tooth-width-10mm-outside-diameter-70mm-sku-22605400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 52 teeth tooth width 10mm outside diameter 67.5mm SKU: 22605200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-52-teeth-tooth-width-10mm-outside-diameter-67-5mm-sku-22605200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 50 teeth tooth width 10mm outside diameter 65mm SKU: 22605000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-50-teeth-tooth-width-10mm-outside-diameter-65mm-sku-22605000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 48 teeth tooth width 10mm outside diameter 62.5mm SKU: 22604800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-48-teeth-tooth-width-10mm-outside-diameter-62-5mm-sku-22604800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 45 teeth tooth width 10mm outside diameter 58.75mm SKU: 22604500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-45-teeth-tooth-width-10mm-outside-diameter-58-75mm-sku-22604500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 42 teeth tooth width 10mm outside diameter 55mm SKU: 22604200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-42-teeth-tooth-width-10mm-outside-diameter-55mm-sku-22604200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 40 teeth tooth width 10mm outside diameter 52.5mm SKU: 22604000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-40-teeth-tooth-width-10mm-outside-diameter-52-5mm-sku-22604000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 38 teeth tooth width 10mm outside diameter 50mm SKU: 22603800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-38-teeth-tooth-width-10mm-outside-diameter-50mm-sku-22603800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 36 teeth tooth width 10mm outside diameter 47.5mm SKU: 22603600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-36-teeth-tooth-width-10mm-outside-diameter-47-5mm-sku-22603600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 35 teeth tooth width 10mm outside diameter 46.25mm SKU: 22603500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-35-teeth-tooth-width-10mm-outside-diameter-46-25mm-sku-22603500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 34 teeth tooth width 10mm outside diameter 45mm SKU: 22603400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-34-teeth-tooth-width-10mm-outside-diameter-45mm-sku-22603400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 32 teeth tooth width 10mm outside diameter 42.5mm SKU: 22603200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-32-teeth-tooth-width-10mm-outside-diameter-42-5mm-sku-22603200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 30 teeth tooth width 10mm outside diameter 40mm SKU: 22603000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-30-teeth-tooth-width-10mm-outside-diameter-40mm-sku-22603000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 28 teeth tooth width 10mm outside diameter 37.5mm SKU: 22602800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-28-teeth-tooth-width-10mm-outside-diameter-37-5mm-sku-22602800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 27 teeth tooth width 10mm outside diameter 36.25mm SKU: 22602700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-27-teeth-tooth-width-10mm-outside-diameter-36-25mm-sku-22602700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 26 teeth tooth width 10mm outside diameter 35mm SKU: 22602600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-26-teeth-tooth-width-10mm-outside-diameter-35mm-sku-22602600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 25 teeth tooth width 10mm outside diameter 33.75mm SKU: 22602500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-25-teeth-tooth-width-10mm-outside-diameter-33-75mm-sku-22602500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 24 teeth tooth width 10mm outside diameter 32.5mm SKU: 22602400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-24-teeth-tooth-width-10mm-outside-diameter-32-5mm-sku-22602400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 23 teeth tooth width 10mm outside diameter 31.25mm SKU: 22602300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-23-teeth-tooth-width-10mm-outside-diameter-31-25mm-sku-22602300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 22 teeth tooth width 10mm outside diameter 30mm SKU: 22602200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-22-teeth-tooth-width-10mm-outside-diameter-30mm-sku-22602200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 21 teeth tooth width 10mm outside diameter 28.75mm SKU: 22602100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-21-teeth-tooth-width-10mm-outside-diameter-28-75mm-sku-22602100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 20 teeth tooth width 10mm outside diameter 27.5mm SKU: 22602000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-20-teeth-tooth-width-10mm-outside-diameter-27-5mm-sku-22602000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 19 teeth tooth width 10mm outside diameter 26.25mm SKU: 22601900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-19-teeth-tooth-width-10mm-outside-diameter-26-25mm-sku-22601900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 17 teeth tooth width 10mm outside diameter 23.75mm SKU: 22601700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-17-teeth-tooth-width-10mm-outside-diameter-23-75mm-sku-22601700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.25 16 teeth tooth width 10mm outside diameter 22.5mm SKU: 22601600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-16-teeth-tooth-width-10mm-outside-diameter-22-5mm-sku-22601600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 124 teeth tooth width 10mm outside diameter 126mm SKU: 22412400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-124-teeth-tooth-width-10mm-outside-diameter-126mm-sku-22412400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 120 teeth tooth width 10mm outside diameter 122mm SKU: 22412000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-120-teeth-tooth-width-10mm-outside-diameter-122mm-sku-22412000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 114 teeth tooth width 10mm outside diameter 116mm SKU: 22411400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-114-teeth-tooth-width-10mm-outside-diameter-116mm-sku-22411400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 127 teeth tooth width 15mm outside diameter 129mm SKU: 22411127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-127-teeth-tooth-width-15mm-outside-diameter-129mm-sku-22411127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 120 teeth tooth width 15mm outside diameter 122mm SKU: 22411120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-120-teeth-tooth-width-15mm-outside-diameter-122mm-sku-22411120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 114 teeth tooth width 15mm outside diameter 116mm SKU: 22411114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-114-teeth-tooth-width-15mm-outside-diameter-116mm-sku-22411114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 110 teeth tooth width 15mm outside diameter 112mm SKU: 22411110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-110-teeth-tooth-width-15mm-outside-diameter-112mm-sku-22411110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 100 teeth tooth width 15mm outside diameter 102mm SKU: 22411100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-100-teeth-tooth-width-15mm-outside-diameter-102mm-sku-22411100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 95 teeth tooth width 15mm outside diameter 97mm SKU: 22411095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-95-teeth-tooth-width-15mm-outside-diameter-97mm-sku-22411095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 90 teeth tooth width 15mm outside diameter 92mm SKU: 22411090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-90-teeth-tooth-width-15mm-outside-diameter-92mm-sku-22411090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 85 teeth tooth width 15mm outside diameter 87mm SKU: 22411085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-85-teeth-tooth-width-15mm-outside-diameter-87mm-sku-22411085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 80 teeth tooth width 15mm outside diameter 82mm SKU: 22411080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-80-teeth-tooth-width-15mm-outside-diameter-82mm-sku-22411080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 76 teeth tooth width 15mm outside diameter 78mm SKU: 22411076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-76-teeth-tooth-width-15mm-outside-diameter-78mm-sku-22411076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 75 teeth tooth width 15mm outside diameter 77mm SKU: 22411075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-75-teeth-tooth-width-15mm-outside-diameter-77mm-sku-22411075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 72 teeth tooth width 15mm outside diameter 74mm SKU: 22411072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-72-teeth-tooth-width-15mm-outside-diameter-74mm-sku-22411072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 60 teeth tooth width 15mm outside diameter 62mm SKU: 22411060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-60-teeth-tooth-width-15mm-outside-diameter-62mm-sku-22411060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 52 teeth tooth width 15mm outside diameter 54mm SKU: 22411052](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-52-teeth-tooth-width-15mm-outside-diameter-54mm-sku-22411052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 50 teeth tooth width 15mm outside diameter 52mm SKU: 22411050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-50-teeth-tooth-width-15mm-outside-diameter-52mm-sku-22411050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 48 teeth tooth width 15mm outside diameter 50mm SKU: 22411048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-48-teeth-tooth-width-15mm-outside-diameter-50mm-sku-22411048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 45 teeth tooth width 15mm outside diameter 47mm SKU: 22411045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-45-teeth-tooth-width-15mm-outside-diameter-47mm-sku-22411045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 40 teeth tooth width 15mm outside diameter 42mm SKU: 22411040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-40-teeth-tooth-width-15mm-outside-diameter-42mm-sku-22411040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 36 teeth tooth width 15mm outside diameter 38mm SKU: 22411036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-36-teeth-tooth-width-15mm-outside-diameter-38mm-sku-22411036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 35 teeth tooth width 15mm outside diameter 37mm SKU: 22411035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-35-teeth-tooth-width-15mm-outside-diameter-37mm-sku-22411035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 30 teeth tooth width 15mm outside diameter 32mm SKU: 22411030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-30-teeth-tooth-width-15mm-outside-diameter-32mm-sku-22411030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 25 teeth tooth width 15mm outside diameter 27mm SKU: 22411025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-25-teeth-tooth-width-15mm-outside-diameter-27mm-sku-22411025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 24 teeth tooth width 15mm outside diameter 26mm SKU: 22411024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-24-teeth-tooth-width-15mm-outside-diameter-26mm-sku-22411024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 20 teeth tooth width 15mm outside diameter 22mm SKU: 22411020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-20-teeth-tooth-width-15mm-outside-diameter-22mm-sku-22411020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1 18 teeth tooth width 15mm outside diameter 20mm SKU: 22411018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-18-teeth-tooth-width-15mm-outside-diameter-20mm-sku-22411018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Clamp collar double-split steel C45 black oxide finished bore 90mm with bolts DIN 912 12.9 SKU: 62349000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-90mm-with-bolts-din-912-12-9-sku-62349000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 80mm with bolts DIN 912 12.9 SKU: 62348000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-80mm-with-bolts-din-912-12-9-sku-62348000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 75mm with bolts DIN 912 12.9 SKU: 62347500](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-75mm-with-bolts-din-912-12-9-sku-62347500/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 70mm with bolts DIN 912 12.9 SKU: 62347000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-70mm-with-bolts-din-912-12-9-sku-62347000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 65mm with bolts DIN 912 12.9 SKU: 62346500](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-65mm-with-bolts-din-912-12-9-sku-62346500/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 60mm with bolts DIN 912 12.9 type N SKU: 62346000N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-60mm-with-bolts-din-912-12-9-type-n-sku-62346000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 60mm with bolts DIN 912 12.9 SKU: 62346000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-60mm-with-bolts-din-912-12-9-sku-62346000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 55mm with bolts DIN 912 12.9 SKU: 62345500](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-55mm-with-bolts-din-912-12-9-sku-62345500/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 50mm with bolts DIN 912 12.9 type N SKU: 62345000N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-50mm-with-bolts-din-912-12-9-type-n-sku-62345000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 50mm with bolts DIN 912 12.9 type GR SKU: 62345000GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-50mm-with-bolts-din-912-12-9-type-gr-sku-62345000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 50mm with bolts DIN 912 12.9 type GA SKU: 62345000GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-50mm-with-bolts-din-912-12-9-type-ga-sku-62345000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 50mm with bolts DIN 912 12.9 type B2 SKU: 62345000B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-50mm-with-bolts-din-912-12-9-type-b2-sku-62345000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 50mm with bolts DIN 912 12.9 type B1 SKU: 62345000B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-50mm-with-bolts-din-912-12-9-type-b1-sku-62345000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 50mm with bolts DIN 912 12.9 SKU: 62345000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-50mm-with-bolts-din-912-12-9-sku-62345000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 48mm with bolts DIN 912 12.9 SKU: 62344800](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-48mm-with-bolts-din-912-12-9-sku-62344800/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 45mm with bolts DIN 912 12.9 type N SKU: 62344500N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-45mm-with-bolts-din-912-12-9-type-n-sku-62344500n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 45mm with bolts DIN 912 12.9 type GR SKU: 62344500GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-45mm-with-bolts-din-912-12-9-type-gr-sku-62344500gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 45mm with bolts DIN 912 12.9 type GA SKU: 62344500GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-45mm-with-bolts-din-912-12-9-type-ga-sku-62344500ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 45mm with bolts DIN 912 12.9 type B2 SKU: 62344500B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-45mm-with-bolts-din-912-12-9-type-b2-sku-62344500b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 45mm with bolts DIN 912 12.9 type B1 SKU: 62344500B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-45mm-with-bolts-din-912-12-9-type-b1-sku-62344500b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 45mm with bolts DIN 912 12.9 SKU: 62344500](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-45mm-with-bolts-din-912-12-9-sku-62344500/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 42mm with bolts DIN 912 12.9 SKU: 62344200](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-42mm-with-bolts-din-912-12-9-sku-62344200/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 40mm with bolts DIN 912 12.9 type N SKU: 62344000N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-40mm-with-bolts-din-912-12-9-type-n-sku-62344000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 40mm with bolts DIN 912 12.9 type GR SKU: 62344000GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-40mm-with-bolts-din-912-12-9-type-gr-sku-62344000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 40mm with bolts DIN 912 12.9 type GA SKU: 62344000GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-40mm-with-bolts-din-912-12-9-type-ga-sku-62344000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 40mm with bolts DIN 912 12.9 type B2 SKU: 62344000B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-40mm-with-bolts-din-912-12-9-type-b2-sku-62344000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 40mm with bolts DIN 912 12.9 type B1 SKU: 62344000B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-40mm-with-bolts-din-912-12-9-type-b1-sku-62344000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 40mm with bolts DIN 912 12.9 SKU: 62344000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-40mm-with-bolts-din-912-12-9-sku-62344000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 38mm with bolts DIN 912 12.9 type N SKU: 62343800N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-38mm-with-bolts-din-912-12-9-type-n-sku-62343800n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 38mm with bolts DIN 912 12.9 type GR SKU: 62343800GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-38mm-with-bolts-din-912-12-9-type-gr-sku-62343800gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 38mm with bolts DIN 912 12.9 type GA SKU: 62343800GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-38mm-with-bolts-din-912-12-9-type-ga-sku-62343800ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 38mm with bolts DIN 912 12.9 type B2 SKU: 62343800B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-38mm-with-bolts-din-912-12-9-type-b2-sku-62343800b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 38mm with bolts DIN 912 12.9 type B1 SKU: 62343800B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-38mm-with-bolts-din-912-12-9-type-b1-sku-62343800b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 38mm with bolts DIN 912 12.9 SKU: 62343800](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-38mm-with-bolts-din-912-12-9-sku-62343800/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 36mm with bolts DIN 912 12.9 SKU: 62343600](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-36mm-with-bolts-din-912-12-9-sku-62343600/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 35mm with bolts DIN 912 12.9 type N SKU: 62343500N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-35mm-with-bolts-din-912-12-9-type-n-sku-62343500n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 35mm with bolts DIN 912 12.9 type GR SKU: 62343500GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-35mm-with-bolts-din-912-12-9-type-gr-sku-62343500gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 35mm with bolts DIN 912 12.9 type GA SKU: 62343500GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-35mm-with-bolts-din-912-12-9-type-ga-sku-62343500ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 35mm with bolts DIN 912 12.9 type B2 SKU: 62343500B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-35mm-with-bolts-din-912-12-9-type-b2-sku-62343500b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 35mm with bolts DIN 912 12.9 type B1 SKU: 62343500B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-35mm-with-bolts-din-912-12-9-type-b1-sku-62343500b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 35mm with bolts DIN 912 12.9 SKU: 62343500](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-35mm-with-bolts-din-912-12-9-sku-62343500/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 34mm with bolts DIN 912 12.9 SKU: 62343400](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-34mm-with-bolts-din-912-12-9-sku-62343400/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 32mm with bolts DIN 912 12.9 type GR SKU: 62343200GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-32mm-with-bolts-din-912-12-9-type-gr-sku-62343200gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 32mm with bolts DIN 912 12.9 type GA SKU: 62343200GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-32mm-with-bolts-din-912-12-9-type-ga-sku-62343200ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 32mm with bolts DIN 912 12.9 type B2 SKU: 62343200B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-32mm-with-bolts-din-912-12-9-type-b2-sku-62343200b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 32mm with bolts DIN 912 12.9 type B1 SKU: 62343200B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-32mm-with-bolts-din-912-12-9-type-b1-sku-62343200b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 32mm with bolts DIN 912 12.9 SKU: 62343200](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-32mm-with-bolts-din-912-12-9-sku-62343200/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 30mm with bolts DIN 912 12.9 type N SKU: 62343000N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-30mm-with-bolts-din-912-12-9-type-n-sku-62343000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 30mm with bolts DIN 912 12.9 type GR SKU: 62343000GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-30mm-with-bolts-din-912-12-9-type-gr-sku-62343000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 30mm with bolts DIN 912 12.9 type GA SKU: 62343000GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-30mm-with-bolts-din-912-12-9-type-ga-sku-62343000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 30mm with bolts DIN 912 12.9 type B2 SKU: 62343000B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-30mm-with-bolts-din-912-12-9-type-b2-sku-62343000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 30mm with bolts DIN 912 12.9 type B1 SKU: 62343000B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-30mm-with-bolts-din-912-12-9-type-b1-sku-62343000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 30mm with bolts DIN 912 12.9 SKU: 62343000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-30mm-with-bolts-din-912-12-9-sku-62343000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 28mm with bolts DIN 912 12.9 type GR SKU: 62342800GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-28mm-with-bolts-din-912-12-9-type-gr-sku-62342800gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 28mm with bolts DIN 912 12.9 type GA SKU: 62342800GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-28mm-with-bolts-din-912-12-9-type-ga-sku-62342800ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 28mm with bolts DIN 912 12.9 type B2 SKU: 62342800B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-28mm-with-bolts-din-912-12-9-type-b2-sku-62342800b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 28mm with bolts DIN 912 12.9 type B1 SKU: 62342800B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-28mm-with-bolts-din-912-12-9-type-b1-sku-62342800b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 28mm with bolts DIN 912 12.9 SKU: 62342800](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-28mm-with-bolts-din-912-12-9-sku-62342800/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 26mm with bolts DIN 912 12.9 SKU: 62342600](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-26mm-with-bolts-din-912-12-9-sku-62342600/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 25mm with bolts DIN 912 12.9 type N SKU: 62342500N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-25mm-with-bolts-din-912-12-9-type-n-sku-62342500n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 25mm with bolts DIN 912 12.9 type GR SKU: 62342500GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-25mm-with-bolts-din-912-12-9-type-gr-sku-62342500gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 25mm with bolts DIN 912 12.9 type GA SKU: 62342500GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-25mm-with-bolts-din-912-12-9-type-ga-sku-62342500ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 25mm with bolts DIN 912 12.9 type B2 SKU: 62342500B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-25mm-with-bolts-din-912-12-9-type-b2-sku-62342500b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 25mm with bolts DIN 912 12.9 type B1 SKU: 62342500B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-25mm-with-bolts-din-912-12-9-type-b1-sku-62342500b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 25mm with bolts DIN 912 12.9 SKU: 62342500](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-25mm-with-bolts-din-912-12-9-sku-62342500/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 24mm with bolts DIN 912 12.9 SKU: 62342400](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-24mm-with-bolts-din-912-12-9-sku-62342400/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 23mm with bolts DIN 912 12.9 SKU: 62342300](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-23mm-with-bolts-din-912-12-9-sku-62342300/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 22mm with bolts DIN 912 12.9 type GR SKU: 62342200GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-22mm-with-bolts-din-912-12-9-type-gr-sku-62342200gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 22mm with bolts DIN 912 12.9 type GA SKU: 62342200GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-22mm-with-bolts-din-912-12-9-type-ga-sku-62342200ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 22mm with bolts DIN 912 12.9 type B2 SKU: 62342200B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-22mm-with-bolts-din-912-12-9-type-b2-sku-62342200b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 22mm with bolts DIN 912 12.9 type B1 SKU: 62342200B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-22mm-with-bolts-din-912-12-9-type-b1-sku-62342200b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 22mm with bolts DIN 912 12.9 SKU: 62342200](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-22mm-with-bolts-din-912-12-9-sku-62342200/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 21mm with bolts DIN 912 12.9 SKU: 62342100](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-21mm-with-bolts-din-912-12-9-sku-62342100/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type N SKU: 62342000N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-20mm-with-bolts-din-912-12-9-type-n-sku-62342000n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type GR SKU: 62342000GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-20mm-with-bolts-din-912-12-9-type-gr-sku-62342000gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type GA SKU: 62342000GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-20mm-with-bolts-din-912-12-9-type-ga-sku-62342000ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type B2 SKU: 62342000B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-20mm-with-bolts-din-912-12-9-type-b2-sku-62342000b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type B1 SKU: 62342000B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-20mm-with-bolts-din-912-12-9-type-b1-sku-62342000b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 SKU: 62342000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-20mm-with-bolts-din-912-12-9-sku-62342000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 19mm with bolts DIN 912 12.9 SKU: 62341900](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-19mm-with-bolts-din-912-12-9-sku-62341900/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 18mm with bolts DIN 912 12.9 type GR SKU: 62341800GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-18mm-with-bolts-din-912-12-9-type-gr-sku-62341800gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 18mm with bolts DIN 912 12.9 type GA SKU: 62341800GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-18mm-with-bolts-din-912-12-9-type-ga-sku-62341800ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 18mm with bolts DIN 912 12.9 type B2 SKU: 62341800B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-18mm-with-bolts-din-912-12-9-type-b2-sku-62341800b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 18mm with bolts DIN 912 12.9 type B1 SKU: 62341800B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-18mm-with-bolts-din-912-12-9-type-b1-sku-62341800b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 18mm with bolts DIN 912 12.9 SKU: 62341800](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-18mm-with-bolts-din-912-12-9-sku-62341800/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 17mm with bolts DIN 912 12.9 SKU: 62341700](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-17mm-with-bolts-din-912-12-9-sku-62341700/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type N SKU: 62341600N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-16mm-with-bolts-din-912-12-9-type-n-sku-62341600n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type GR SKU: 62341600GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-16mm-with-bolts-din-912-12-9-type-gr-sku-62341600gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type GA SKU: 62341600GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-16mm-with-bolts-din-912-12-9-type-ga-sku-62341600ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type B2 SKU: 62341600B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-16mm-with-bolts-din-912-12-9-type-b2-sku-62341600b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type B1 SKU: 62341600B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-16mm-with-bolts-din-912-12-9-type-b1-sku-62341600b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 SKU: 62341600](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-16mm-with-bolts-din-912-12-9-sku-62341600/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 15mm with bolts DIN 912 12.9 type N SKU: 62341500N](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-15mm-with-bolts-din-912-12-9-type-n-sku-62341500n/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 15mm with bolts DIN 912 12.9 type GR SKU: 62341500GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-15mm-with-bolts-din-912-12-9-type-gr-sku-62341500gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 15mm with bolts DIN 912 12.9 type GA SKU: 62341500GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-15mm-with-bolts-din-912-12-9-type-ga-sku-62341500ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 15mm with bolts DIN 912 12.9 type B2 SKU: 62341500B2](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-15mm-with-bolts-din-912-12-9-type-b2-sku-62341500b2/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 15mm with bolts DIN 912 12.9 type B1 SKU: 62341500B1](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-15mm-with-bolts-din-912-12-9-type-b1-sku-62341500b1/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. * Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 15mm with bolts DIN 912 12.9 SKU: 62341500](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-15mm-with-bolts-din-912-12-9-sku-62341500/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 14mm with bolts DIN 912 12.9 type GR SKU: 62341400GR](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-14mm-with-bolts-din-912-12-9-type-gr-sku-62341400gr/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split steel C45 black oxide finished bore 14mm with bolts DIN 912 12.9 type GA SKU: 62341400GA](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-14mm-with-bolts-din-912-12-9-type-ga-sku-62341400ga/): Material: Steel C45, black oxide finish. Screw steel 12.9. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product.It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps tokeep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Spur gear made of steel C45 with hub module 2 100 teeth tooth width 16mm outside diameter 204mm SKU: 23110000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-100-teeth-tooth-width-16mm-outside-diameter-204mm-sku-23110000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 95 teeth tooth width 16mm outside diameter 194mm SKU: 23109500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-95-teeth-tooth-width-16mm-outside-diameter-194mm-sku-23109500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 90 teeth tooth width 16mm outside diameter 184mm SKU: 23109000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-90-teeth-tooth-width-16mm-outside-diameter-184mm-sku-23109000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 85 teeth tooth width 16mm outside diameter 174mm SKU: 23108500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-85-teeth-tooth-width-16mm-outside-diameter-174mm-sku-23108500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 80 teeth tooth width 16mm outside diameter 164mm SKU: 23108000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-80-teeth-tooth-width-16mm-outside-diameter-164mm-sku-23108000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 78 teeth tooth width 16mm outside diameter 160mm SKU: 23107800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-78-teeth-tooth-width-16mm-outside-diameter-160mm-sku-23107800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 76 teeth tooth width 16mm outside diameter 156mm SKU: 23107600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-76-teeth-tooth-width-16mm-outside-diameter-156mm-sku-23107600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 75 teeth tooth width 16mm outside diameter 154mm SKU: 23107500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-75-teeth-tooth-width-16mm-outside-diameter-154mm-sku-23107500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 74 teeth tooth width 16mm outside diameter 152mm SKU: 23107400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-74-teeth-tooth-width-16mm-outside-diameter-152mm-sku-23107400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 72 teeth tooth width 16mm outside diameter 148mm SKU: 23107200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-72-teeth-tooth-width-16mm-outside-diameter-148mm-sku-23107200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 70 teeth tooth width 16mm outside diameter 144mm SKU: 23107000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-70-teeth-tooth-width-16mm-outside-diameter-144mm-sku-23107000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 68 teeth tooth width 16mm outside diameter 140mm SKU: 23106800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-68-teeth-tooth-width-16mm-outside-diameter-140mm-sku-23106800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 67 teeth tooth width 16mm outside diameter 138mm SKU: 23106700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-67-teeth-tooth-width-16mm-outside-diameter-138mm-sku-23106700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 65 teeth tooth width 16mm outside diameter 134mm SKU: 23106500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-65-teeth-tooth-width-16mm-outside-diameter-134mm-sku-23106500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 64 teeth tooth width 16mm outside diameter 132mm SKU: 23106400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-64-teeth-tooth-width-16mm-outside-diameter-132mm-sku-23106400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 63 teeth tooth width 16mm outside diameter 130mm SKU: 23106300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-63-teeth-tooth-width-16mm-outside-diameter-130mm-sku-23106300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 62 teeth tooth width 16mm outside diameter 128mm SKU: 23106200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-62-teeth-tooth-width-16mm-outside-diameter-128mm-sku-23106200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 60 teeth tooth width 16mm outside diameter 124mm SKU: 23106000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-60-teeth-tooth-width-16mm-outside-diameter-124mm-sku-23106000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 59 teeth tooth width 16mm outside diameter 122mm SKU: 23105900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-59-teeth-tooth-width-16mm-outside-diameter-122mm-sku-23105900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 58 teeth tooth width 16mm outside diameter 120mm SKU: 23105800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-58-teeth-tooth-width-16mm-outside-diameter-120mm-sku-23105800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 57 teeth tooth width 16mm outside diameter 118mm SKU: 23105700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-57-teeth-tooth-width-16mm-outside-diameter-118mm-sku-23105700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 56 teeth tooth width 16mm outside diameter 116mm SKU: 23105600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-56-teeth-tooth-width-16mm-outside-diameter-116mm-sku-23105600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 55 teeth tooth width 16mm outside diameter 114mm SKU: 23105500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-55-teeth-tooth-width-16mm-outside-diameter-114mm-sku-23105500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 54 teeth tooth width 16mm outside diameter 112mm SKU: 23105400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-54-teeth-tooth-width-16mm-outside-diameter-112mm-sku-23105400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 53 teeth tooth width 16mm outside diameter 110mm SKU: 23105300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-53-teeth-tooth-width-16mm-outside-diameter-110mm-sku-23105300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 52 teeth tooth width 16mm outside diameter 108mm SKU: 23105200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-52-teeth-tooth-width-16mm-outside-diameter-108mm-sku-23105200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 50 teeth tooth width 16mm outside diameter 104mm SKU: 23105000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-50-teeth-tooth-width-16mm-outside-diameter-104mm-sku-23105000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 48 teeth tooth width 16mm outside diameter 100mm SKU: 23104800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-48-teeth-tooth-width-16mm-outside-diameter-100mm-sku-23104800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 47 teeth tooth width 16mm outside diameter 98mm SKU: 23104700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-47-teeth-tooth-width-16mm-outside-diameter-98mm-sku-23104700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 46 teeth tooth width 16mm outside diameter 96mm SKU: 23104600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-46-teeth-tooth-width-16mm-outside-diameter-96mm-sku-23104600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 45 teeth tooth width 16mm outside diameter 94mm SKU: 23104500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-45-teeth-tooth-width-16mm-outside-diameter-94mm-sku-23104500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 44 teeth tooth width 16mm outside diameter 92mm SKU: 23104400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-44-teeth-tooth-width-16mm-outside-diameter-92mm-sku-23104400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 42 teeth tooth width 16mm outside diameter 88mm SKU: 23104200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-42-teeth-tooth-width-16mm-outside-diameter-88mm-sku-23104200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 40 teeth tooth width 16mm outside diameter 84mm SKU: 23104000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-40-teeth-tooth-width-16mm-outside-diameter-84mm-sku-23104000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 38 teeth tooth width 16mm outside diameter 40mm SKU: 23103800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-38-teeth-tooth-width-16mm-outside-diameter-40mm-sku-23103800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 37 teeth tooth width 16mm outside diameter 78mm SKU: 23103700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-37-teeth-tooth-width-16mm-outside-diameter-78mm-sku-23103700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 36 teeth tooth width 16mm outside diameter 76mm SKU: 23103600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-36-teeth-tooth-width-16mm-outside-diameter-76mm-sku-23103600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 35 teeth tooth width 16mm outside diameter 74mm SKU: 23103500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-35-teeth-tooth-width-16mm-outside-diameter-74mm-sku-23103500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 34 teeth tooth width 16mm outside diameter 72mm SKU: 23103400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-34-teeth-tooth-width-16mm-outside-diameter-72mm-sku-23103400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 32 teeth tooth width 16mm outside diameter 68mm SKU: 23103200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-32-teeth-tooth-width-16mm-outside-diameter-68mm-sku-23103200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 31 teeth tooth width 16mm outside diameter 66mm SKU: 23103100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-31-teeth-tooth-width-16mm-outside-diameter-66mm-sku-23103100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 30 teeth tooth width 16mm outside diameter 64mm SKU: 23103000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-30-teeth-tooth-width-16mm-outside-diameter-64mm-sku-23103000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 29 teeth tooth width 16mm outside diameter 62mm SKU: 23102900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-29-teeth-tooth-width-16mm-outside-diameter-62mm-sku-23102900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 28 teeth tooth width 16mm outside diameter 60mm SKU: 23102800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-28-teeth-tooth-width-16mm-outside-diameter-60mm-sku-23102800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 27 teeth tooth width 16mm outside diameter 58mm SKU: 23102700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-27-teeth-tooth-width-16mm-outside-diameter-58mm-sku-23102700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 26 teeth tooth width 16mm outside diameter 56mm SKU: 23102600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-26-teeth-tooth-width-16mm-outside-diameter-56mm-sku-23102600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 25 teeth tooth width 16mm outside diameter 54mm SKU: 23102500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-25-teeth-tooth-width-16mm-outside-diameter-54mm-sku-23102500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 24 teeth tooth width 16mm outside diameter 52mm SKU: 23102400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-24-teeth-tooth-width-16mm-outside-diameter-52mm-sku-23102400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 23 teeth tooth width 16mm outside diameter 50mm SKU: 23102300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-23-teeth-tooth-width-16mm-outside-diameter-50mm-sku-23102300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 22 teeth tooth width 16mm outside diameter 48mm SKU: 23102200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-22-teeth-tooth-width-16mm-outside-diameter-48mm-sku-23102200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 21 teeth tooth width 16mm outside diameter 46mm SKU: 23102100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-21-teeth-tooth-width-16mm-outside-diameter-46mm-sku-23102100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 20 teeth tooth width 16mm outside diameter 44mm SKU: 23102000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-20-teeth-tooth-width-16mm-outside-diameter-44mm-sku-23102000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 19 teeth tooth width 16mm outside diameter 42mm SKU: 23101900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-19-teeth-tooth-width-16mm-outside-diameter-42mm-sku-23101900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 18 teeth tooth width 16mm outside diameter 40mm SKU: 23101800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-18-teeth-tooth-width-16mm-outside-diameter-40mm-sku-23101800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 17 teeth tooth width 16mm outside diameter 38mm SKU: 23101700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-17-teeth-tooth-width-16mm-outside-diameter-38mm-sku-23101700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 16 teeth tooth width 16mm outside diameter 36mm SKU: 23101600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-16-teeth-tooth-width-16mm-outside-diameter-36mm-sku-23101600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 15 teeth tooth width 16mm outside diameter 34mm SKU: 23101500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-15-teeth-tooth-width-16mm-outside-diameter-34mm-sku-23101500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 14 teeth tooth width 16mm outside diameter 32mm SKU: 23101400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-14-teeth-tooth-width-16mm-outside-diameter-32mm-sku-23101400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 13 teeth tooth width 16mm outside diameter 30mm SKU: 23101300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-13-teeth-tooth-width-16mm-outside-diameter-30mm-sku-23101300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 12 teeth tooth width 16mm outside diameter 28mm SKU: 23101200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-12-teeth-tooth-width-16mm-outside-diameter-28mm-sku-23101200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 10 teeth tooth width 16mm outside diameter 24mm SKU: 23101000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-10-teeth-tooth-width-16mm-outside-diameter-24mm-sku-23101000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 120 teeth tooth width 15mm outside diameter 183mm SKU: 22812000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-120-teeth-tooth-width-15mm-outside-diameter-183mm-sku-22812000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 114 teeth tooth width 15mm outside diameter 174mm SKU: 22811400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-114-teeth-tooth-width-15mm-outside-diameter-174mm-sku-22811400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 127 teeth tooth width 17mm outside diameter 193.5mm SKU: 22811127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-127-teeth-tooth-width-17mm-outside-diameter-193-5mm-sku-22811127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 22811120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-22811120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 114 teeth tooth width 17mm outside diameter 174mm SKU: 22811114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-114-teeth-tooth-width-17mm-outside-diameter-174mm-sku-22811114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 110 teeth tooth width 17mm outside diameter 168mm SKU: 22811110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-110-teeth-tooth-width-17mm-outside-diameter-168mm-sku-22811110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 100 teeth tooth width 17mm outside diameter 153mm SKU: 22811100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-100-teeth-tooth-width-17mm-outside-diameter-153mm-sku-22811100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 95 teeth tooth width 17mm outside diameter 145.5mm SKU: 22811095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-95-teeth-tooth-width-17mm-outside-diameter-145-5mm-sku-22811095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 90 teeth tooth width 17mm outside diameter 138mm SKU: 22811090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-90-teeth-tooth-width-17mm-outside-diameter-138mm-sku-22811090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 85 teeth tooth width 17mm outside diameter 130.5mm SKU: 22811085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-85-teeth-tooth-width-17mm-outside-diameter-130-5mm-sku-22811085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 22811080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-22811080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 76 teeth tooth width 17mm outside diameter 117mm SKU: 22811076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-76-teeth-tooth-width-17mm-outside-diameter-117mm-sku-22811076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 75 teeth tooth width 17mm outside diameter 115.5mm SKU: 22811075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-75-teeth-tooth-width-17mm-outside-diameter-115-5mm-sku-22811075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 72 teeth tooth width 17mm outside diameter 111mm SKU: 22811072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-72-teeth-tooth-width-17mm-outside-diameter-111mm-sku-22811072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 22811060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-22811060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 22811050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-22811050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 22811048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-22811048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 22811045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-22811045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 22811040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-22811040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 22811036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-22811036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 35 teeth tooth width 17mm outside diameter 55.5mm SKU: 22811035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-35-teeth-tooth-width-17mm-outside-diameter-55-5mm-sku-22811035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 22811030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-22811030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 22811025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-22811025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 24 teeth tooth width 17mm outside diameter 39mm SKU: 22811024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-24-teeth-tooth-width-17mm-outside-diameter-39mm-sku-22811024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 20 teeth tooth width 17mm outside diameter 33mm SKU: 22811020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-20-teeth-tooth-width-17mm-outside-diameter-33mm-sku-22811020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 18 teeth tooth width 17mm outside diameter 30mm SKU: 22811018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-18-teeth-tooth-width-17mm-outside-diameter-30mm-sku-22811018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 110 teeth tooth width 15mm outside diameter 168mm SKU: 22811000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-110-teeth-tooth-width-15mm-outside-diameter-168mm-sku-22811000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 100 teeth tooth width 15mm outside diameter 153mm SKU: 22810000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-100-teeth-tooth-width-15mm-outside-diameter-153mm-sku-22810000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 96 teeth tooth width 15mm outside diameter 147mm SKU: 22809600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-96-teeth-tooth-width-15mm-outside-diameter-147mm-sku-22809600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 95 teeth tooth width 15mm outside diameter 145.5mm SKU: 22809500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-95-teeth-tooth-width-15mm-outside-diameter-145-5mm-sku-22809500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 90 teeth tooth width 15mm outside diameter 138mm SKU: 22809000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-90-teeth-tooth-width-15mm-outside-diameter-138mm-sku-22809000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 88 teeth tooth width 15mm outside diameter 135mm SKU: 22808800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-88-teeth-tooth-width-15mm-outside-diameter-135mm-sku-22808800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 85 teeth tooth width 15mm outside diameter 130.5mm SKU: 22808500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-85-teeth-tooth-width-15mm-outside-diameter-130-5mm-sku-22808500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 80 teeth tooth width 15mm outside diameter 123mm SKU: 22808000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-123mm-sku-22808000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 76 teeth tooth width 15mm outside diameter 117mm SKU: 22807600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-76-teeth-tooth-width-15mm-outside-diameter-117mm-sku-22807600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 75 teeth tooth width 15mm outside diameter 115.5mm SKU: 22807500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-75-teeth-tooth-width-15mm-outside-diameter-115-5mm-sku-22807500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 72 teeth tooth width 15mm outside diameter 111mm SKU: 22807200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-72-teeth-tooth-width-15mm-outside-diameter-111mm-sku-22807200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 70 teeth tooth width 15mm outside diameter 108mm SKU: 22807000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-108mm-sku-22807000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 1.5 67 teeth tooth width 15mm outside diameter 103.5mm SKU: 22806700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-1-5-67-teeth-tooth-width-15mm-outside-diameter-103-5mm-sku-22806700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 50mm outer diameter 60mm flange diameter 70mm length 50mm SKU: 62355505](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-50mm-outer-diameter-60mm-flange-diameter-70mm-length-50mm-sku-62355505/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 50mm outer diameter 60mm flange diameter 70mm length 32mm SKU: 62355500](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-50mm-outer-diameter-60mm-flange-diameter-70mm-length-32mm-sku-62355500/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 45mm outer diameter 56mm flange diameter 67mm length 45mm SKU: 62355445](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-45mm-outer-diameter-56mm-flange-diameter-67mm-length-45mm-sku-62355445/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 45mm outer diameter 56mm flange diameter 67mm length 36mm SKU: 62355436](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-45mm-outer-diameter-56mm-flange-diameter-67mm-length-36mm-sku-62355436/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 45mm outer diameter 56mm flange diameter 67mm length 28mm SKU: 62355428](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-45mm-outer-diameter-56mm-flange-diameter-67mm-length-28mm-sku-62355428/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 40mm outer diameter 50mm flange diameter 60mm length 40mm SKU: 62355205](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-40mm-outer-diameter-50mm-flange-diameter-60mm-length-40mm-sku-62355205/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 40mm outer diameter 50mm flange diameter 60mm length 25mm SKU: 62355200](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-40mm-outer-diameter-50mm-flange-diameter-60mm-length-25mm-sku-62355200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 36mm outer diameter 45mm flange diameter 54mm length 22mm SKU: 62355100](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-36mm-outer-diameter-45mm-flange-diameter-54mm-length-22mm-sku-62355100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Clamp collar double-split plastic PA reinforced black-grey bore 40mm SKU: 62355040](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-40mm-sku-62355040/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Clamp collar double-split plastic PA reinforced black-grey bore 35mm SKU: 62355035](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-35mm-sku-62355035/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Clamp collar double-split plastic PA reinforced black-grey bore 30mm SKU: 62355030](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-30mm-sku-62355030/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Clamp collar double-split plastic PA reinforced black-grey bore 25mm SKU: 62355025](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-25mm-sku-62355025/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Clamp collar double-split plastic PA reinforced black-grey bore 22mm SKU: 62355022](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-22mm-sku-62355022/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Clamp collar double-split plastic PA reinforced black-grey bore 20mm SKU: 62355020](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-20mm-sku-62355020/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Clamp collar double-split plastic PA reinforced black-grey bore 18mm SKU: 62355018](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-18mm-sku-62355018/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Clamp collar double-split plastic PA reinforced black-grey bore 16mm SKU: 62355016](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-16mm-sku-62355016/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Clamp collar double-split plastic PA reinforced black-grey bore 14mm SKU: 62355014](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-14mm-sku-62355014/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Clamp collar double-split plastic PA reinforced black-grey bore 12mm SKU: 62355012](https://maedler.in/product/clamp-collar-double-split-plastic-pa-reinforced-black-grey-bore-12mm-sku-62355012/): Material: Technopolymer (Polyamide PA), glas fibre reinforced, black-grey, mat. Screws and nuts stainless steel 1.4404.Features:Strong version with metal nuts.Easy to mount and quickly to adjust.Does not damage the shaft.Even distribution of clamping force.Low mass inertia.Suitable for use in corrosive atmospheres.Temperature range: up to +80ºC. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 40mm outer diameter 46mm flange diameter 52mm length 40mm SKU: 62355000](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-40mm-outer-diameter-46mm-flange-diameter-52mm-length-40mm-sku-62355000/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 36mm outer diameter 45mm flange diameter 54mm length 36mm SKU: 62354705](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-36mm-outer-diameter-45mm-flange-diameter-54mm-length-36mm-sku-62354705/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 36mm outer diameter 45mm flange diameter 54mm length 28mm SKU: 62354700](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-36mm-outer-diameter-45mm-flange-diameter-54mm-length-28mm-sku-62354700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 35mm outer diameter 45mm flange diameter 55mm length 35mm SKU: 62354635](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-35mm-outer-diameter-45mm-flange-diameter-55mm-length-35mm-sku-62354635/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 35mm outer diameter 45mm flange diameter 55mm length 25mm SKU: 62354625](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-35mm-outer-diameter-45mm-flange-diameter-55mm-length-25mm-sku-62354625/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 32mm outer diameter 40mm flange diameter 48mm length 30mm SKU: 62354530](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-32mm-outer-diameter-40mm-flange-diameter-48mm-length-30mm-sku-62354530/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 32mm outer diameter 40mm flange diameter 48mm length 25mm SKU: 62354525](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-32mm-outer-diameter-40mm-flange-diameter-48mm-length-25mm-sku-62354525/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 32mm outer diameter 40mm flange diameter 48mm length 20mm SKU: 62354520](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-32mm-outer-diameter-40mm-flange-diameter-48mm-length-20mm-sku-62354520/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 30mm outer diameter 38mm flange diameter 46mm length 30mm SKU: 62354410](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-30mm-outer-diameter-38mm-flange-diameter-46mm-length-30mm-sku-62354410/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 30mm outer diameter 38mm flange diameter 46mm length 25mm SKU: 62354405](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-30mm-outer-diameter-38mm-flange-diameter-46mm-length-25mm-sku-62354405/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 30mm outer diameter 38mm flange diameter 46mm length 20mm SKU: 62354400](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-30mm-outer-diameter-38mm-flange-diameter-46mm-length-20mm-sku-62354400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 28mm outer diameter 36mm flange diameter 44mm length 36mm SKU: 62354336](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-28mm-outer-diameter-36mm-flange-diameter-44mm-length-36mm-sku-62354336/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 28mm outer diameter 36mm flange diameter 44mm length 22mm SKU: 62354300](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-28mm-outer-diameter-36mm-flange-diameter-44mm-length-22mm-sku-62354300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 28mm outer diameter 33mm flange diameter 38mm length 36mm SKU: 62354205](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-28mm-outer-diameter-33mm-flange-diameter-38mm-length-36mm-sku-62354205/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 28mm outer diameter 33mm flange diameter 38mm length 22mm SKU: 62354200](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-28mm-outer-diameter-33mm-flange-diameter-38mm-length-22mm-sku-62354200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 25mm outer diameter 35mm flange diameter 45mm length 30mm SKU: 62354109](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-25mm-outer-diameter-35mm-flange-diameter-45mm-length-30mm-sku-62354109/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 25mm outer diameter 35mm flange diameter 45mm length 25mm SKU: 62354108](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-25mm-outer-diameter-35mm-flange-diameter-45mm-length-25mm-sku-62354108/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 25mm outer diameter 35mm flange diameter 45mm length 16mm SKU: 62354107](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-25mm-outer-diameter-35mm-flange-diameter-45mm-length-16mm-sku-62354107/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 25mm outer diameter 32mm flange diameter 39mm length 25mm SKU: 62354105](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-25mm-outer-diameter-32mm-flange-diameter-39mm-length-25mm-sku-62354105/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 25mm outer diameter 32mm flange diameter 39mm length 20mm SKU: 62354102](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-25mm-outer-diameter-32mm-flange-diameter-39mm-length-20mm-sku-62354102/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 25mm outer diameter 30mm flange diameter 35mm length 25mm SKU: 62354100](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-25mm-outer-diameter-30mm-flange-diameter-35mm-length-25mm-sku-62354100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 25mm outer diameter 30mm flange diameter 35mm length 20mm SKU: 62354000](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-25mm-outer-diameter-30mm-flange-diameter-35mm-length-20mm-sku-62354000/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 22mm outer diameter 28mm flange diameter 33mm length 25mm SKU: 62353975](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-22mm-outer-diameter-28mm-flange-diameter-33mm-length-25mm-sku-62353975/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 22mm outer diameter 28mm flange diameter 33mm length 15mm SKU: 62353965](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-22mm-outer-diameter-28mm-flange-diameter-33mm-length-15mm-sku-62353965/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 28mm flange diameter 35mm length 30mm SKU: 62353930](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-28mm-flange-diameter-35mm-length-30mm-sku-62353930/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 28mm flange diameter 35mm length 25mm SKU: 62353925](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-28mm-flange-diameter-35mm-length-25mm-sku-62353925/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 28mm flange diameter 35mm length 20mm SKU: 62353900](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-28mm-flange-diameter-35mm-length-20mm-sku-62353900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 26mm flange diameter 32mm length 32mm SKU: 62353805](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-26mm-flange-diameter-32mm-length-32mm-sku-62353805/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 26mm flange diameter 32mm length 25mm SKU: 62353800](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-26mm-flange-diameter-32mm-length-25mm-sku-62353800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 26mm flange diameter 32mm length 20mm SKU: 62353700](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-26mm-flange-diameter-32mm-length-20mm-sku-62353700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 26mm flange diameter 32mm length 16mm SKU: 62353600](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-26mm-flange-diameter-32mm-length-16mm-sku-62353600/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 26mm flange diameter 32mm length 15mm SKU: 62353505](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-26mm-flange-diameter-32mm-length-15mm-sku-62353505/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 24mm flange diameter 28mm length 20mm SKU: 62353500](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-24mm-flange-diameter-28mm-length-20mm-sku-62353500/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 20mm outer diameter 24mm flange diameter 28mm length 16mm SKU: 62353400](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-20mm-outer-diameter-24mm-flange-diameter-28mm-length-16mm-sku-62353400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 18mm outer diameter 24mm flange diameter 30mm length 18mm SKU: 62353300](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-18mm-outer-diameter-24mm-flange-diameter-30mm-length-18mm-sku-62353300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 18mm outer diameter 22mm flange diameter 26mm length 28mm SKU: 62353228](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-18mm-outer-diameter-22mm-flange-diameter-26mm-length-28mm-sku-62353228/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 18mm outer diameter 22mm flange diameter 26mm length 22mm SKU: 62353222](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-18mm-outer-diameter-22mm-flange-diameter-26mm-length-22mm-sku-62353222/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 18mm outer diameter 22mm flange diameter 26mm length 18mm SKU: 62353200](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-18mm-outer-diameter-22mm-flange-diameter-26mm-length-18mm-sku-62353200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 16mm outer diameter 22mm flange diameter 28mm length 20mm SKU: 62353000](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-16mm-outer-diameter-22mm-flange-diameter-28mm-length-20mm-sku-62353000/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 16mm outer diameter 22mm flange diameter 28mm length 16mm SKU: 62352900](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-16mm-outer-diameter-22mm-flange-diameter-28mm-length-16mm-sku-62352900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 16mm outer diameter 22mm flange diameter 28mm length 25mm SKU: 62352805](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-16mm-outer-diameter-22mm-flange-diameter-28mm-length-25mm-sku-62352805/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 16mm outer diameter 20mm flange diameter 24mm length 20mm SKU: 62352800](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-16mm-outer-diameter-20mm-flange-diameter-24mm-length-20mm-sku-62352800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 16mm outer diameter 20mm flange diameter 24mm length 16mm SKU: 62352700](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-16mm-outer-diameter-20mm-flange-diameter-24mm-length-16mm-sku-62352700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 15mm outer diameter 20mm flange diameter 25mm length 20mm SKU: 62352620](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-15mm-outer-diameter-20mm-flange-diameter-25mm-length-20mm-sku-62352620/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 15mm outer diameter 20mm flange diameter 25mm length 15mm SKU: 62352615](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-15mm-outer-diameter-20mm-flange-diameter-25mm-length-15mm-sku-62352615/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 14mm outer diameter 20mm flange diameter 25mm length 25mm SKU: 62352525](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-14mm-outer-diameter-20mm-flange-diameter-25mm-length-25mm-sku-62352525/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 14mm outer diameter 20mm flange diameter 25mm length 14mm SKU: 62352514](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-14mm-outer-diameter-20mm-flange-diameter-25mm-length-14mm-sku-62352514/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 14mm outer diameter 18mm flange diameter 22mm length 22mm SKU: 62352422](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-14mm-outer-diameter-18mm-flange-diameter-22mm-length-22mm-sku-62352422/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 14mm outer diameter 18mm flange diameter 22mm length 14mm SKU: 62352400](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-14mm-outer-diameter-18mm-flange-diameter-22mm-length-14mm-sku-62352400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 12mm outer diameter 18mm flange diameter 24mm length 20mm SKU: 62352300](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-12mm-outer-diameter-18mm-flange-diameter-24mm-length-20mm-sku-62352300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 12mm outer diameter 18mm flange diameter 24mm length 12mm SKU: 62352205](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-12mm-outer-diameter-18mm-flange-diameter-24mm-length-12mm-sku-62352205/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 12mm outer diameter 17mm flange diameter 22mm length 16mm SKU: 62352202](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-12mm-outer-diameter-17mm-flange-diameter-22mm-length-16mm-sku-62352202/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 12mm outer diameter 17mm flange diameter 22mm length 12mm SKU: 62352200](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-12mm-outer-diameter-17mm-flange-diameter-22mm-length-12mm-sku-62352200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 12mm outer diameter 17mm flange diameter 22mm length 20mm SKU: 62352105](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-12mm-outer-diameter-17mm-flange-diameter-22mm-length-20mm-sku-62352105/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 12mm outer diameter 15mm flange diameter 18mm length 16mm SKU: 62352100](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-12mm-outer-diameter-15mm-flange-diameter-18mm-length-16mm-sku-62352100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 12mm outer diameter 15mm flange diameter 18mm length 12mm SKU: 62352000](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-12mm-outer-diameter-15mm-flange-diameter-18mm-length-12mm-sku-62352000/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 16mm flange diameter 22mm length 16mm SKU: 62351815](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-16mm-flange-diameter-22mm-length-16mm-sku-62351815/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 16mm flange diameter 22mm length 10mm SKU: 62351810](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-16mm-flange-diameter-22mm-length-10mm-sku-62351810/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 15mm flange diameter 20mm length 16mm SKU: 62351807](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-15mm-flange-diameter-20mm-length-16mm-sku-62351807/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 15mm flange diameter 20mm length 10mm SKU: 62351805](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-15mm-flange-diameter-20mm-length-10mm-sku-62351805/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 14mm flange diameter 18mm length 20mm SKU: 62351804](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-14mm-flange-diameter-18mm-length-20mm-sku-62351804/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 14mm flange diameter 18mm length 15mm SKU: 62351803](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-14mm-flange-diameter-18mm-length-15mm-sku-62351803/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 14mm flange diameter 18mm length 10mm SKU: 62351802](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-14mm-flange-diameter-18mm-length-10mm-sku-62351802/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 13mm flange diameter 16mm length 20mm SKU: 62351801](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-13mm-flange-diameter-16mm-length-20mm-sku-62351801/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 13mm flange diameter 16mm length 16mm SKU: 62351800](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-13mm-flange-diameter-16mm-length-16mm-sku-62351800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 10mm outer diameter 13mm flange diameter 16mm length 10mm SKU: 62351700](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-10mm-outer-diameter-13mm-flange-diameter-16mm-length-10mm-sku-62351700/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 9mm outer diameter 14mm flange diameter 19mm length 14mm SKU: 62351514](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-9mm-outer-diameter-14mm-flange-diameter-19mm-length-14mm-sku-62351514/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 9mm outer diameter 14mm flange diameter 19mm length 10mm SKU: 62351510](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-9mm-outer-diameter-14mm-flange-diameter-19mm-length-10mm-sku-62351510/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 9mm outer diameter 14mm flange diameter 19mm length 6mm SKU: 62351506](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-9mm-outer-diameter-14mm-flange-diameter-19mm-length-6mm-sku-62351506/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 8mm outer diameter 12mm flange diameter 16mm length 16mm SKU: 62351400](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-8mm-outer-diameter-12mm-flange-diameter-16mm-length-16mm-sku-62351400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 8mm outer diameter 12mm flange diameter 16mm length 12mm SKU: 62351300](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-8mm-outer-diameter-12mm-flange-diameter-16mm-length-12mm-sku-62351300/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 8mm outer diameter 12mm flange diameter 16mm length 8mm SKU: 62351200](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-8mm-outer-diameter-12mm-flange-diameter-16mm-length-8mm-sku-62351200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 6mm outer diameter 10mm flange diameter 14mm length 16mm SKU: 62351000](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-6mm-outer-diameter-10mm-flange-diameter-14mm-length-16mm-sku-62351000/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 6mm outer diameter 10mm flange diameter 14mm length 10mm SKU: 62350900](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-6mm-outer-diameter-10mm-flange-diameter-14mm-length-10mm-sku-62350900/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 6mm outer diameter 10mm flange diameter 14mm length 6mm SKU: 62350800](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-6mm-outer-diameter-10mm-flange-diameter-14mm-length-6mm-sku-62350800/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 4mm outer diameter 8mm flange diameter 12mm length 12mm SKU: 62350405](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-4mm-outer-diameter-8mm-flange-diameter-12mm-length-12mm-sku-62350405/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 4mm outer diameter 8mm flange diameter 12mm length 8mm SKU: 62350403](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-4mm-outer-diameter-8mm-flange-diameter-12mm-length-8mm-sku-62350403/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 4mm outer diameter 8mm flange diameter 12mm length 4mm SKU: 62350400](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-4mm-outer-diameter-8mm-flange-diameter-12mm-length-4mm-sku-62350400/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 3mm outer diameter 6mm flange diameter 9mm length 10mm SKU: 62350200](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-3mm-outer-diameter-6mm-flange-diameter-9mm-length-10mm-sku-62350200/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 3mm outer diameter 6mm flange diameter 9mm length 6mm SKU: 62350106](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-3mm-outer-diameter-6mm-flange-diameter-9mm-length-6mm-sku-62350106/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 3mm outer diameter 6mm flange diameter 9mm length 4mm SKU: 62350100](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-3mm-outer-diameter-6mm-flange-diameter-9mm-length-4mm-sku-62350100/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Clamp collar double-split steel C45 black oxide finished bore 100mm with bolts DIN 912 12.9 SKU: 62350000](https://maedler.in/product/clamp-collar-double-split-steel-c45-black-oxide-finished-bore-100mm-with-bolts-din-912-12-9-sku-62350000/): Material: Steel C45, black oxide finish. Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C.Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Spur gear made of steel C45 with hub module 2.5 56 teeth tooth width 20mm outside diameter 145mm SKU: 23205600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-56-teeth-tooth-width-20mm-outside-diameter-145mm-sku-23205600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 55 teeth tooth width 20mm outside diameter 142.5mm SKU: 23205500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-55-teeth-tooth-width-20mm-outside-diameter-142-5mm-sku-23205500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 54 teeth tooth width 20mm outside diameter 140mm SKU: 23205400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-54-teeth-tooth-width-20mm-outside-diameter-140mm-sku-23205400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 52 teeth tooth width 20mm outside diameter 135mm SKU: 23205200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-52-teeth-tooth-width-20mm-outside-diameter-135mm-sku-23205200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 50 teeth tooth width 20mm outside diameter 130mm SKU: 23205000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-50-teeth-tooth-width-20mm-outside-diameter-130mm-sku-23205000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 48 teeth tooth width 20mm outside diameter 125mm SKU: 23204800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-48-teeth-tooth-width-20mm-outside-diameter-125mm-sku-23204800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 46 teeth tooth width 20mm outside diameter 120mm SKU: 23204600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-46-teeth-tooth-width-20mm-outside-diameter-120mm-sku-23204600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 45 teeth tooth width 20mm outside diameter 117.5mm SKU: 23204500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-45-teeth-tooth-width-20mm-outside-diameter-117-5mm-sku-23204500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 42 teeth tooth width 20mm outside diameter 110mm SKU: 23204200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-42-teeth-tooth-width-20mm-outside-diameter-110mm-sku-23204200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 40 teeth tooth width 20mm outside diameter 105mm SKU: 23204000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-40-teeth-tooth-width-20mm-outside-diameter-105mm-sku-23204000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 38 teeth tooth width 20mm outside diameter 100mm SKU: 23203800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-38-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23203800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 36 teeth tooth width 20mm outside diameter 95mm SKU: 23203600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-36-teeth-tooth-width-20mm-outside-diameter-95mm-sku-23203600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 35 teeth tooth width 20mm outside diameter 92.5mm SKU: 23203500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-35-teeth-tooth-width-20mm-outside-diameter-92-5mm-sku-23203500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 34 teeth tooth width 20mm outside diameter 90mm SKU: 23203400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-34-teeth-tooth-width-20mm-outside-diameter-90mm-sku-23203400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 32 teeth tooth width 20mm outside diameter 85mm SKU: 23203200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-32-teeth-tooth-width-20mm-outside-diameter-85mm-sku-23203200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 30 teeth tooth width 20mm outside diameter 80mm SKU: 23203000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-30-teeth-tooth-width-20mm-outside-diameter-80mm-sku-23203000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 28 teeth tooth width 20mm outside diameter 75mm SKU: 23202800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-28-teeth-tooth-width-20mm-outside-diameter-75mm-sku-23202800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 27 teeth tooth width 20mm outside diameter 72.5mm SKU: 23202700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-27-teeth-tooth-width-20mm-outside-diameter-72-5mm-sku-23202700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 26 teeth tooth width 20mm outside diameter 70mm SKU: 23202600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-26-teeth-tooth-width-20mm-outside-diameter-70mm-sku-23202600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm SKU: 23202500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-25-teeth-tooth-width-20mm-outside-diameter-67-5mm-sku-23202500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 24 teeth tooth width 20mm outside diameter 65mm SKU: 23202400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-24-teeth-tooth-width-20mm-outside-diameter-65mm-sku-23202400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 23 teeth tooth width 20mm outside diameter 62.5mm SKU: 23202300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-23-teeth-tooth-width-20mm-outside-diameter-62-5mm-sku-23202300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 22 teeth tooth width 20mm outside diameter 60mm SKU: 23202200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-22-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23202200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 21 teeth tooth width 20mm outside diameter 57.5mm SKU: 23202100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-21-teeth-tooth-width-20mm-outside-diameter-57-5mm-sku-23202100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 20 teeth tooth width 20mm outside diameter 55mm SKU: 23202000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-20-teeth-tooth-width-20mm-outside-diameter-55mm-sku-23202000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 19 teeth tooth width 20mm outside diameter 52.5mm SKU: 23201900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-19-teeth-tooth-width-20mm-outside-diameter-52-5mm-sku-23201900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 18 teeth tooth width 20mm outside diameter 50mm SKU: 23201800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-18-teeth-tooth-width-20mm-outside-diameter-50mm-sku-23201800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 17 teeth tooth width 20mm outside diameter 47.5mm SKU: 23201700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-17-teeth-tooth-width-20mm-outside-diameter-47-5mm-sku-23201700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 16 teeth tooth width 20mm outside diameter 45mm SKU: 23201600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-16-teeth-tooth-width-20mm-outside-diameter-45mm-sku-23201600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 15 teeth tooth width 20mm outside diameter 42.5mm SKU: 23201500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-15-teeth-tooth-width-20mm-outside-diameter-42-5mm-sku-23201500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 14 teeth tooth width 20mm outside diameter 40mm SKU: 23201400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-14-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23201400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 13 teeth tooth width 20mm outside diameter 37.5mm SKU: 23201300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-13-teeth-tooth-width-20mm-outside-diameter-37-5mm-sku-23201300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 20mm outside diameter 35mm SKU: 23201200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-12-teeth-tooth-width-20mm-outside-diameter-35mm-sku-23201200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 120 teeth tooth width 16mm outside diameter 244mm SKU: 23112000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-120-teeth-tooth-width-16mm-outside-diameter-244mm-sku-23112000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 114 teeth tooth width 16mm outside diameter 232mm SKU: 23111400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-114-teeth-tooth-width-16mm-outside-diameter-232mm-sku-23111400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 120 teeth tooth width 20mm outside diameter 244mm SKU: 23111120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-120-teeth-tooth-width-20mm-outside-diameter-244mm-sku-23111120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 100 teeth tooth width 20mm outside diameter 204mm SKU: 23111100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-100-teeth-tooth-width-20mm-outside-diameter-204mm-sku-23111100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 90 teeth tooth width 20mm outside diameter 184mm SKU: 23111090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-90-teeth-tooth-width-20mm-outside-diameter-184mm-sku-23111090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23111080](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23111080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 75 teeth tooth width 20mm outside diameter 154mm SKU: 23111075](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-75-teeth-tooth-width-20mm-outside-diameter-154mm-sku-23111075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 70 teeth tooth width 20mm outside diameter 144mm SKU: 23111070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-70-teeth-tooth-width-20mm-outside-diameter-144mm-sku-23111070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 69 teeth tooth width 20mm outside diameter 142mm SKU: 23111069](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-69-teeth-tooth-width-20mm-outside-diameter-142mm-sku-23111069/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 68 teeth tooth width 20mm outside diameter 140mm SKU: 23111068](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-68-teeth-tooth-width-20mm-outside-diameter-140mm-sku-23111068/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 67 teeth tooth width 20mm outside diameter 138mm SKU: 23111067](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-67-teeth-tooth-width-20mm-outside-diameter-138mm-sku-23111067/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 66 teeth tooth width 20mm outside diameter 136mm SKU: 23111066](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-66-teeth-tooth-width-20mm-outside-diameter-136mm-sku-23111066/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 65 teeth tooth width 20mm outside diameter 134mm SKU: 23111065](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-65-teeth-tooth-width-20mm-outside-diameter-134mm-sku-23111065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 64 teeth tooth width 20mm outside diameter 132mm SKU: 23111064](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-64-teeth-tooth-width-20mm-outside-diameter-132mm-sku-23111064/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 63 teeth tooth width 20mm outside diameter 130mm SKU: 23111063](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-63-teeth-tooth-width-20mm-outside-diameter-130mm-sku-23111063/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 62 teeth tooth width 20mm outside diameter 128mm SKU: 23111062](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-62-teeth-tooth-width-20mm-outside-diameter-128mm-sku-23111062/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 61 teeth tooth width 20mm outside diameter 126mm SKU: 23111061](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-61-teeth-tooth-width-20mm-outside-diameter-126mm-sku-23111061/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23111060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23111060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 59 teeth tooth width 20mm outside diameter 122mm SKU: 23111059](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-59-teeth-tooth-width-20mm-outside-diameter-122mm-sku-23111059/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 58 teeth tooth width 20mm outside diameter 120mm SKU: 23111058](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-58-teeth-tooth-width-20mm-outside-diameter-120mm-sku-23111058/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 57 teeth tooth width 20mm outside diameter 118mm SKU: 23111057](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-57-teeth-tooth-width-20mm-outside-diameter-118mm-sku-23111057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 56 teeth tooth width 20mm outside diameter 116mm SKU: 23111056](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-56-teeth-tooth-width-20mm-outside-diameter-116mm-sku-23111056/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 55 teeth tooth width 20mm outside diameter 114mm SKU: 23111055](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-55-teeth-tooth-width-20mm-outside-diameter-114mm-sku-23111055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 54 teeth tooth width 20mm outside diameter 112mm SKU: 23111054](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-54-teeth-tooth-width-20mm-outside-diameter-112mm-sku-23111054/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 53 teeth tooth width 20mm outside diameter 110mm SKU: 23111053](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-53-teeth-tooth-width-20mm-outside-diameter-110mm-sku-23111053/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 52 teeth tooth width 20mm outside diameter 108mm SKU: 23111052](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-52-teeth-tooth-width-20mm-outside-diameter-108mm-sku-23111052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 51 teeth tooth width 20mm outside diameter 106mm SKU: 23111051](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-51-teeth-tooth-width-20mm-outside-diameter-106mm-sku-23111051/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23111050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23111050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 49 teeth tooth width 20mm outside diameter 102mm SKU: 23111049](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-49-teeth-tooth-width-20mm-outside-diameter-102mm-sku-23111049/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 23111048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23111048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 47 teeth tooth width 20mm outside diameter 98mm SKU: 23111047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-47-teeth-tooth-width-20mm-outside-diameter-98mm-sku-23111047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 46 teeth tooth width 20mm outside diameter 96mm SKU: 23111046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-46-teeth-tooth-width-20mm-outside-diameter-96mm-sku-23111046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23111045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23111045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 44 teeth tooth width 20mm outside diameter 92mm SKU: 23111044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-44-teeth-tooth-width-20mm-outside-diameter-92mm-sku-23111044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 43 teeth tooth width 20mm outside diameter 90mm SKU: 23111043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-43-teeth-tooth-width-20mm-outside-diameter-90mm-sku-23111043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 42 teeth tooth width 20mm outside diameter 88mm SKU: 23111042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-42-teeth-tooth-width-20mm-outside-diameter-88mm-sku-23111042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 41 teeth tooth width 20mm outside diameter 86mm SKU: 23111041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-41-teeth-tooth-width-20mm-outside-diameter-86mm-sku-23111041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23111040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23111040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 39 teeth tooth width 20mm outside diameter 82mm SKU: 23111039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-39-teeth-tooth-width-20mm-outside-diameter-82mm-sku-23111039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 38 teeth tooth width 20mm outside diameter 80mm SKU: 23111038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-38-teeth-tooth-width-20mm-outside-diameter-80mm-sku-23111038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 37 teeth tooth width 20mm outside diameter 78mm SKU: 23111037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-37-teeth-tooth-width-20mm-outside-diameter-78mm-sku-23111037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23111036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23111036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23111035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23111035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 34 teeth tooth width 20mm outside diameter 72mm SKU: 23111034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-34-teeth-tooth-width-20mm-outside-diameter-72mm-sku-23111034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 33 teeth tooth width 20mm outside diameter 70mm SKU: 23111033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-33-teeth-tooth-width-20mm-outside-diameter-70mm-sku-23111033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23111032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23111032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 31 teeth tooth width 20mm outside diameter 66mm SKU: 23111031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-31-teeth-tooth-width-20mm-outside-diameter-66mm-sku-23111031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23111030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23111030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 29 teeth tooth width 20mm outside diameter 62mm SKU: 23111029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-29-teeth-tooth-width-20mm-outside-diameter-62mm-sku-23111029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23111028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23111028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 27 teeth tooth width 20mm outside diameter 58mm SKU: 23111027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-27-teeth-tooth-width-20mm-outside-diameter-58mm-sku-23111027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 26 teeth tooth width 20mm outside diameter 56mm SKU: 23111026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-26-teeth-tooth-width-20mm-outside-diameter-56mm-sku-23111026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23111025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23111025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23111024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23111024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 23 teeth tooth width 20mm outside diameter 50mm SKU: 23111023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-23-teeth-tooth-width-20mm-outside-diameter-50mm-sku-23111023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 22 teeth tooth width 20mm outside diameter 48mm SKU: 23111022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-22-teeth-tooth-width-20mm-outside-diameter-48mm-sku-23111022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 21 teeth tooth width 20mm outside diameter 46mm SKU: 23111021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-21-teeth-tooth-width-20mm-outside-diameter-46mm-sku-23111021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23111020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23111020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 19 teeth tooth width 20mm outside diameter 42mm SKU: 23111019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-19-teeth-tooth-width-20mm-outside-diameter-42mm-sku-23111019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23111018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23111018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 17 teeth tooth width 20mm outside diameter 38mm SKU: 23111017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-17-teeth-tooth-width-20mm-outside-diameter-38mm-sku-23111017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 16 teeth tooth width 20mm outside diameter 36mm SKU: 23111016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-16-teeth-tooth-width-20mm-outside-diameter-36mm-sku-23111016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 15 teeth tooth width 20mm outside diameter 34mm SKU: 23111015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-15-teeth-tooth-width-20mm-outside-diameter-34mm-sku-23111015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 14 teeth tooth width 20mm outside diameter 32mm SKU: 23111014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-14-teeth-tooth-width-20mm-outside-diameter-32mm-sku-23111014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 13 teeth tooth width 20mm outside diameter 30mm SKU: 23111013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-13-teeth-tooth-width-20mm-outside-diameter-30mm-sku-23111013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 12 teeth tooth width 20mm outside diameter 28mm SKU: 23111012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-12-teeth-tooth-width-20mm-outside-diameter-28mm-sku-23111012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 110 teeth tooth width 16mm outside diameter 224mm SKU: 23111000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-110-teeth-tooth-width-16mm-outside-diameter-224mm-sku-23111000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Quick-release shaft collar aluminium black anodized bore 32mm SKU: 62366232](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-32mm-sku-62366232/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 30mm SKU: 62366230](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-30mm-sku-62366230/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 28mm SKU: 62366228](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-28mm-sku-62366228/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 25mm SKU: 62366225](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-25mm-sku-62366225/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 20mm SKU: 62366220](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-20mm-sku-62366220/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 16mm SKU: 62366216](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-16mm-sku-62366216/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 15mm SKU: 62366215](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-15mm-sku-62366215/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 14mm SKU: 62366214](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-14mm-sku-62366214/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 12mm SKU: 62366212](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-12mm-sku-62366212/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 10mm SKU: 62366210](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-10mm-sku-62366210/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 8mm SKU: 62366208](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-8mm-sku-62366208/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 6mm SKU: 62366206](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-6mm-sku-62366206/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Clamp collar single-split aluminium bore 50mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62366150K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-50mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62366150k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 50mm with bolt DIN 912 A2-70 SKU: 62366150](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-50mm-with-bolt-din-912-a2-70-sku-62366150/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 48mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62366148K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-48mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62366148k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 48mm with bolt DIN 912 A2-70 SKU: 62366148](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-48mm-with-bolt-din-912-a2-70-sku-62366148/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 45mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62366145K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-45mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62366145k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 45mm with bolt DIN 912 A2-70 SKU: 62366145](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-45mm-with-bolt-din-912-a2-70-sku-62366145/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 42mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62366142K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-42mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62366142k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 42mm with bolt DIN 912 A2-70 SKU: 62366142](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-42mm-with-bolt-din-912-a2-70-sku-62366142/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 40mm with bolt DIN 912 A2-70 type S SKU: 62366140S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-40mm-with-bolt-din-912-a2-70-type-s-sku-62366140s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 40mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62366140K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-40mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62366140k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 40mm with bolt DIN 912 A2-70 SKU: 62366140](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-40mm-with-bolt-din-912-a2-70-sku-62366140/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 38mm with bolt DIN 912 A2-70 type S SKU: 62366138S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-38mm-with-bolt-din-912-a2-70-type-s-sku-62366138s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 38mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62366138K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-38mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62366138k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 38mm with bolt DIN 912 A2-70 SKU: 62366138](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-38mm-with-bolt-din-912-a2-70-sku-62366138/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 36mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62366136K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-36mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62366136k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 36mm with bolt DIN 912 A2-70 SKU: 62366136](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-36mm-with-bolt-din-912-a2-70-sku-62366136/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 35mm with bolt DIN 912 A2-70 type S SKU: 62366135S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-35mm-with-bolt-din-912-a2-70-type-s-sku-62366135s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 35mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62366135K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-35mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62366135k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 35mm with bolt DIN 912 A2-70 SKU: 62366135](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-35mm-with-bolt-din-912-a2-70-sku-62366135/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 34mm with bolt DIN 912 A2-70 SKU: 62366134](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-34mm-with-bolt-din-912-a2-70-sku-62366134/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 32mm with bolt DIN 912 A2-70 type S SKU: 62366132S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-32mm-with-bolt-din-912-a2-70-type-s-sku-62366132s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 32mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62366132K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-32mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62366132k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 32mm with bolt DIN 912 A2-70 SKU: 62366132](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-32mm-with-bolt-din-912-a2-70-sku-62366132/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 30mm with bolt DIN 912 A2-70 type S SKU: 62366130S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-30mm-with-bolt-din-912-a2-70-type-s-sku-62366130s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 30mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62366130K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-30mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62366130k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 30mm with bolt DIN 912 A2-70 SKU: 62366130](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-30mm-with-bolt-din-912-a2-70-sku-62366130/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 28mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62366128K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-28mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62366128k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 28mm with bolt DIN 912 A2-70 SKU: 62366128](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-28mm-with-bolt-din-912-a2-70-sku-62366128/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 26mm with bolt DIN 912 A2-70 SKU: 62366126](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-26mm-with-bolt-din-912-a2-70-sku-62366126/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 25mm with bolt DIN 912 A2-70 type S SKU: 62366125S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-25mm-with-bolt-din-912-a2-70-type-s-sku-62366125s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 25mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62366125K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-25mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62366125k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 25mm with bolt DIN 912 A2-70 SKU: 62366125](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-25mm-with-bolt-din-912-a2-70-sku-62366125/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 24mm with bolt DIN 912 A2-70 type S SKU: 62366124S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-24mm-with-bolt-din-912-a2-70-type-s-sku-62366124s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 24mm with bolt DIN 912 A2-70 SKU: 62366124](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-24mm-with-bolt-din-912-a2-70-sku-62366124/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 23mm with bolt DIN 912 A2-70 SKU: 62366123](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-23mm-with-bolt-din-912-a2-70-sku-62366123/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 22mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62366122K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-22mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62366122k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 22mm with bolt DIN 912 A2-70 SKU: 62366122](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-22mm-with-bolt-din-912-a2-70-sku-62366122/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 21mm with bolt DIN 912 A2-70 SKU: 62366121](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-21mm-with-bolt-din-912-a2-70-sku-62366121/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 20mm with bolt DIN 912 A2-70 type S SKU: 62366120S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-20mm-with-bolt-din-912-a2-70-type-s-sku-62366120s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 20mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62366120K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-20mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62366120k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 20mm with bolt DIN 912 A2-70 SKU: 62366120](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-20mm-with-bolt-din-912-a2-70-sku-62366120/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 19mm with bolt DIN 912 A2-70 SKU: 62366119](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-19mm-with-bolt-din-912-a2-70-sku-62366119/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 18mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62366118K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-18mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62366118k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 18mm with bolt DIN 912 A2-70 SKU: 62366118](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-18mm-with-bolt-din-912-a2-70-sku-62366118/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 17mm with bolt DIN 912 A2-70 SKU: 62366117](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-17mm-with-bolt-din-912-a2-70-sku-62366117/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 16mm with bolt DIN 912 A2-70 type S SKU: 62366116S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-16mm-with-bolt-din-912-a2-70-type-s-sku-62366116s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 16mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62366116K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-16mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62366116k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 16mm with bolt DIN 912 A2-70 SKU: 62366116](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-16mm-with-bolt-din-912-a2-70-sku-62366116/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 15mm with bolt DIN 912 A2-70 type S SKU: 62366115S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-15mm-with-bolt-din-912-a2-70-type-s-sku-62366115s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 15mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62366115K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-15mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62366115k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 15mm with bolt DIN 912 A2-70 SKU: 62366115](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-15mm-with-bolt-din-912-a2-70-sku-62366115/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 14mm with bolt DIN 912 A2-70 type S SKU: 62366114S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-14mm-with-bolt-din-912-a2-70-type-s-sku-62366114s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 14mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62366114K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-14mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62366114k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 14mm with bolt DIN 912 A2-70 SKU: 62366114](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-14mm-with-bolt-din-912-a2-70-sku-62366114/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 13mm with bolt DIN 912 A2-70 SKU: 62366113](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-13mm-with-bolt-din-912-a2-70-sku-62366113/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 12mm with bolt DIN 912 A2-70 type S SKU: 62366112S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-12mm-with-bolt-din-912-a2-70-type-s-sku-62366112s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 12mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62366112K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-12mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62366112k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 12mm with bolt DIN 912 A2-70 SKU: 62366112](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-12mm-with-bolt-din-912-a2-70-sku-62366112/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 11mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62366111K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-11mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62366111k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 11mm with bolt DIN 912 A2-70 SKU: 62366111](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-11mm-with-bolt-din-912-a2-70-sku-62366111/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 10mm with bolt DIN 912 A2-70 type S SKU: 62366110S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-10mm-with-bolt-din-912-a2-70-type-s-sku-62366110s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 10mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62366110K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-10mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62366110k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 10mm with bolt DIN 912 A2-70 SKU: 62366110](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-10mm-with-bolt-din-912-a2-70-sku-62366110/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 9mm with bolt DIN 912 A2-70 SKU: 62366109](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-9mm-with-bolt-din-912-a2-70-sku-62366109/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 8mm with bolt DIN 912 A2-70 type S SKU: 62366108S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-8mm-with-bolt-din-912-a2-70-type-s-sku-62366108s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 8mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62366108K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-8mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62366108k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 8mm with bolt DIN 912 A2-70 SKU: 62366108](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-8mm-with-bolt-din-912-a2-70-sku-62366108/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 7mm with bolt DIN 912 A2-70 SKU: 62366107](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-7mm-with-bolt-din-912-a2-70-sku-62366107/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 6mm with bolt DIN 912 A2-70 type S SKU: 62366106S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-6mm-with-bolt-din-912-a2-70-type-s-sku-62366106s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 6mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62366106K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-6mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62366106k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 6mm with bolt DIN 912 A2-70 SKU: 62366106](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-6mm-with-bolt-din-912-a2-70-sku-62366106/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 5mm with bolt DIN 912 A2-70 type S SKU: 62366105S](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-5mm-with-bolt-din-912-a2-70-type-s-sku-62366105s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split aluminium bore 5mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62366105K](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-5mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62366105k/): Material: Aluminium. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split aluminium bore 5mm with bolt DIN 912 A2-70 SKU: 62366105](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-5mm-with-bolt-din-912-a2-70-sku-62366105/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 4mm with bolt DIN 912 A2-70 SKU: 62366104](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-4mm-with-bolt-din-912-a2-70-sku-62366104/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium bore 3mm with bolt DIN 912 A2-70 SKU: 62366103](https://maedler.in/product/clamp-collar-single-split-aluminium-bore-3mm-with-bolt-din-912-a2-70-sku-62366103/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar with thread single split steel C45 black oxide finished thread M30 x 3.50 with bolt DIN 912 12.9 SKU: 62363000](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m30-x-3-50-with-bolt-din-912-12-9-sku-62363000/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split steel C45 black oxide finished thread M24 x 3.00 with bolt DIN 912 12.9 SKU: 62362400](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m24-x-3-00-with-bolt-din-912-12-9-sku-62362400/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split steel C45 black oxide finished thread M20 x 2.50 with bolt DIN 912 12.9 SKU: 62362000](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m20-x-2-50-with-bolt-din-912-12-9-sku-62362000/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split steel C45 black oxide finished thread M16 x 2.00 with bolt DIN 912 12.9 SKU: 62361600](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m16-x-2-00-with-bolt-din-912-12-9-sku-62361600/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split steel C45 black oxide finished thread M12 x 1.75 with bolt DIN 912 12.9 SKU: 62361200](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m12-x-1-75-with-bolt-din-912-12-9-sku-62361200/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split steel C45 black oxide finished thread M10 x 1.50 with bolt DIN 912 12.9 SKU: 62361000](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m10-x-1-50-with-bolt-din-912-12-9-sku-62361000/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split steel C45 black oxide finished thread M8 x 1.25 with bolt DIN 912 12.9 SKU: 62360800](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m8-x-1-25-with-bolt-din-912-12-9-sku-62360800/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split steel C45 black oxide finished thread M6 x 1.00 with bolt DIN 912 12.9 SKU: 62360600](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m6-x-1-00-with-bolt-din-912-12-9-sku-62360600/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split steel C45 black oxide finished thread M5 x 0.80 with bolt DIN 912 12.9 SKU: 62360500](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m5-x-0-80-with-bolt-din-912-12-9-sku-62360500/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split steel C45 black oxide finished thread M4 x 0.70 with bolt DIN 912 12.9 SKU: 62360400](https://maedler.in/product/clamp-collar-with-thread-single-split-steel-c45-black-oxide-finished-thread-m4-x-0-70-with-bolt-din-912-12-9-sku-62360400/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 60mm outer diameter 70mm flange diameter 80mm length 60mm SKU: 62356060](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-60mm-outer-diameter-70mm-flange-diameter-80mm-length-60mm-sku-62356060/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Flanged bush similar to DIN 1850 V (DIN 4379 F) sintered bronze bore 60mm outer diameter 70mm flange diameter 80mm length 50mm SKU: 62356050](https://maedler.in/product/flanged-bush-similar-to-din-1850-v-din-4379-f-sintered-bronze-bore-60mm-outer-diameter-70mm-flange-diameter-80mm-length-50mm-sku-62356050/): Material: Sintered bronze similar SINT A50. Self lubricating, oil coated, pressed ready-to-install and 1) kalibrated. Edges chamfered at 45°, at choice of the manufacturer. The concentricity tolerance refers to d2. 1) no statement regarding the surface roughness according to DIN 3141 (prenorm) can be given due to the porous structure of the sintered metal. Technical Data: Surface pressure: max. 35 N/mm², depending on speed and diameter. Temperature range: -20°C to +120°C. Dimension r: For bores 3 - 8 mm = 0.3 mm, bores 9 - 22 mm = 0.6 mm, bores 25 - 60 mm = 0.8 mm Tolerances: Inner diameter d1: F8 / G8. Outer diameter d2: s8. Flange diameter d3: js13. Length b1:+/-0.1mm.Flange thickness b2: js14. - [Spur gear made of steel C45 with hub module 3 57 teeth tooth width 25mm outside diameter 177mm SKU: 23305700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-57-teeth-tooth-width-25mm-outside-diameter-177mm-sku-23305700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 56 teeth tooth width 25mm outside diameter 174mm SKU: 23305600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-56-teeth-tooth-width-25mm-outside-diameter-174mm-sku-23305600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 55 teeth tooth width 25mm outside diameter 171mm SKU: 23305500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-55-teeth-tooth-width-25mm-outside-diameter-171mm-sku-23305500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 54 teeth tooth width 25mm outside diameter 168mm SKU: 23305400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-54-teeth-tooth-width-25mm-outside-diameter-168mm-sku-23305400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 52 teeth tooth width 25mm outside diameter 162mm SKU: 23305200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-52-teeth-tooth-width-25mm-outside-diameter-162mm-sku-23305200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 50 teeth tooth width 25mm outside diameter 156mm SKU: 23305000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-50-teeth-tooth-width-25mm-outside-diameter-156mm-sku-23305000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 48 teeth tooth width 25mm outside diameter 150mm SKU: 23304800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-48-teeth-tooth-width-25mm-outside-diameter-150mm-sku-23304800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 45 teeth tooth width 25mm outside diameter 141mm SKU: 23304500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-45-teeth-tooth-width-25mm-outside-diameter-141mm-sku-23304500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 42 teeth tooth width 25mm outside diameter 132mm SKU: 23304200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-42-teeth-tooth-width-25mm-outside-diameter-132mm-sku-23304200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 40 teeth tooth width 25mm outside diameter 126mm SKU: 23304000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-40-teeth-tooth-width-25mm-outside-diameter-126mm-sku-23304000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 38 teeth tooth width 25mm outside diameter 120mm SKU: 23303800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-38-teeth-tooth-width-25mm-outside-diameter-120mm-sku-23303800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 36 teeth tooth width 25mm outside diameter 114mm SKU: 23303600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-36-teeth-tooth-width-25mm-outside-diameter-114mm-sku-23303600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 35 teeth tooth width 25mm outside diameter 111mm SKU: 23303500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-35-teeth-tooth-width-25mm-outside-diameter-111mm-sku-23303500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 32 teeth tooth width 25mm outside diameter 102mm SKU: 23303200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-32-teeth-tooth-width-25mm-outside-diameter-102mm-sku-23303200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 30 teeth tooth width 25mm outside diameter 96mm SKU: 23303000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-30-teeth-tooth-width-25mm-outside-diameter-96mm-sku-23303000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 28 teeth tooth width 25mm outside diameter 90mm SKU: 23302800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-28-teeth-tooth-width-25mm-outside-diameter-90mm-sku-23302800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 27 teeth tooth width 25mm outside diameter 87mm SKU: 23302700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-27-teeth-tooth-width-25mm-outside-diameter-87mm-sku-23302700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 26 teeth tooth width 25mm outside diameter 84mm SKU: 23302600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-26-teeth-tooth-width-25mm-outside-diameter-84mm-sku-23302600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 25 teeth tooth width 25mm outside diameter 81mm SKU: 23302500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-25-teeth-tooth-width-25mm-outside-diameter-81mm-sku-23302500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 24 teeth tooth width 25mm outside diameter 78mm SKU: 23302400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-24-teeth-tooth-width-25mm-outside-diameter-78mm-sku-23302400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 23 teeth tooth width 25mm outside diameter 75mm SKU: 23302300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-23-teeth-tooth-width-25mm-outside-diameter-75mm-sku-23302300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 22 teeth tooth width 25mm outside diameter 72mm SKU: 23302200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-22-teeth-tooth-width-25mm-outside-diameter-72mm-sku-23302200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 21 teeth tooth width 25mm outside diameter 69mm SKU: 23302100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-21-teeth-tooth-width-25mm-outside-diameter-69mm-sku-23302100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 20 teeth tooth width 25mm outside diameter 66mm SKU: 23302000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-20-teeth-tooth-width-25mm-outside-diameter-66mm-sku-23302000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 19 teeth tooth width 25mm outside diameter 63mm SKU: 23301900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-19-teeth-tooth-width-25mm-outside-diameter-63mm-sku-23301900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 18 teeth tooth width 25mm outside diameter 60mm SKU: 23301800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-teeth-tooth-width-25mm-outside-diameter-60mm-sku-23301800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 17 teeth tooth width 25mm outside diameter 57mm SKU: 23301700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-17-teeth-tooth-width-25mm-outside-diameter-57mm-sku-23301700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 16 teeth tooth width 25mm outside diameter 54mm SKU: 23301600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-16-teeth-tooth-width-25mm-outside-diameter-54mm-sku-23301600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 15 teeth tooth width 25mm outside diameter 51mm SKU: 23301500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-15-teeth-tooth-width-25mm-outside-diameter-51mm-sku-23301500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 14 teeth tooth width 25mm outside diameter 48mm SKU: 23301400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-14-teeth-tooth-width-25mm-outside-diameter-48mm-sku-23301400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 13 teeth tooth width 25mm outside diameter 45mm SKU: 23301300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-13-teeth-tooth-width-25mm-outside-diameter-45mm-sku-23301300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 12 teeth tooth width 25mm outside diameter 42mm SKU: 23301200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-12-teeth-tooth-width-25mm-outside-diameter-42mm-sku-23301200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 127 teeth tooth width 20mm outside diameter 322.5mm SKU: 23212700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-127-teeth-tooth-width-20mm-outside-diameter-322-5mm-sku-23212700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 120 teeth tooth width 20mm outside diameter 305mm SKU: 23212000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-120-teeth-tooth-width-20mm-outside-diameter-305mm-sku-23212000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 120 teeth tooth width 25mm outside diameter 305mm SKU: 23211120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-120-teeth-tooth-width-25mm-outside-diameter-305mm-sku-23211120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 100 teeth tooth width 25mm outside diameter 255mm SKU: 23211100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-100-teeth-tooth-width-25mm-outside-diameter-255mm-sku-23211100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 90 teeth tooth width 25mm outside diameter 230mm SKU: 23211090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-90-teeth-tooth-width-25mm-outside-diameter-230mm-sku-23211090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 70 teeth tooth width 25mm outside diameter 180mm SKU: 23211070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-70-teeth-tooth-width-25mm-outside-diameter-180mm-sku-23211070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 23211060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-23211060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 59 teeth tooth width 25mm outside diameter 152.5mm SKU: 23211059](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-59-teeth-tooth-width-25mm-outside-diameter-152-5mm-sku-23211059/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 58 teeth tooth width 25mm outside diameter 150mm SKU: 23211058](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-58-teeth-tooth-width-25mm-outside-diameter-150mm-sku-23211058/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 57 teeth tooth width 25mm outside diameter 147.5mm SKU: 23211057](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-57-teeth-tooth-width-25mm-outside-diameter-147-5mm-sku-23211057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 56 teeth tooth width 25mm outside diameter 145mm SKU: 23211056](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-56-teeth-tooth-width-25mm-outside-diameter-145mm-sku-23211056/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 55 teeth tooth width 25mm outside diameter 142.5mm SKU: 23211055](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-55-teeth-tooth-width-25mm-outside-diameter-142-5mm-sku-23211055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 54 teeth tooth width 25mm outside diameter 140mm SKU: 23211054](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-54-teeth-tooth-width-25mm-outside-diameter-140mm-sku-23211054/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 53 teeth tooth width 25mm outside diameter 137.5mm SKU: 23211053](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-53-teeth-tooth-width-25mm-outside-diameter-137-5mm-sku-23211053/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 52 teeth tooth width 25mm outside diameter 135mm SKU: 23211052](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-52-teeth-tooth-width-25mm-outside-diameter-135mm-sku-23211052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 51 teeth tooth width 25mm outside diameter 132.5mm SKU: 23211051](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-51-teeth-tooth-width-25mm-outside-diameter-132-5mm-sku-23211051/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 23211050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-23211050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 49 teeth tooth width 25mm outside diameter 127.5mm SKU: 23211049](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-49-teeth-tooth-width-25mm-outside-diameter-127-5mm-sku-23211049/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 23211048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-23211048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 47 teeth tooth width 25mm outside diameter 122.5mm SKU: 23211047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-47-teeth-tooth-width-25mm-outside-diameter-122-5mm-sku-23211047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 46 teeth tooth width 25mm outside diameter 120mm SKU: 23211046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-46-teeth-tooth-width-25mm-outside-diameter-120mm-sku-23211046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 45 teeth tooth width 25mm outside diameter 117.5mm SKU: 23211045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-45-teeth-tooth-width-25mm-outside-diameter-117-5mm-sku-23211045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 44 teeth tooth width 25mm outside diameter 115mm SKU: 23211044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-44-teeth-tooth-width-25mm-outside-diameter-115mm-sku-23211044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 43 teeth tooth width 25mm outside diameter 112.5mm SKU: 23211043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-43-teeth-tooth-width-25mm-outside-diameter-112-5mm-sku-23211043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 42 teeth tooth width 25mm outside diameter 110mm SKU: 23211042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-42-teeth-tooth-width-25mm-outside-diameter-110mm-sku-23211042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 41 teeth tooth width 25mm outside diameter 107.5mm SKU: 23211041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-41-teeth-tooth-width-25mm-outside-diameter-107-5mm-sku-23211041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23211040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23211040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 39 teeth tooth width 25mm outside diameter 102.5mm SKU: 23211039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-39-teeth-tooth-width-25mm-outside-diameter-102-5mm-sku-23211039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 38 teeth tooth width 25mm outside diameter 100mm SKU: 23211038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-38-teeth-tooth-width-25mm-outside-diameter-100mm-sku-23211038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 37 teeth tooth width 25mm outside diameter 97.5mm SKU: 23211037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-37-teeth-tooth-width-25mm-outside-diameter-97-5mm-sku-23211037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 36 teeth tooth width 25mm outside diameter 95mm SKU: 23211036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-sku-23211036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 35 teeth tooth width 25mm outside diameter 92.5mm SKU: 23211035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-35-teeth-tooth-width-25mm-outside-diameter-92-5mm-sku-23211035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 34 teeth tooth width 25mm outside diameter 90mm SKU: 23211034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-34-teeth-tooth-width-25mm-outside-diameter-90mm-sku-23211034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 33 teeth tooth width 25mm outside diameter 87.5mm SKU: 23211033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-33-teeth-tooth-width-25mm-outside-diameter-87-5mm-sku-23211033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 32 teeth tooth width 25mm outside diameter 85mm SKU: 23211032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-sku-23211032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 31 teeth tooth width 25mm outside diameter 82.5mm SKU: 23211031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-31-teeth-tooth-width-25mm-outside-diameter-82-5mm-sku-23211031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23211030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23211030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 29 teeth tooth width 25mm outside diameter 77.5mm SKU: 23211029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-29-teeth-tooth-width-25mm-outside-diameter-77-5mm-sku-23211029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 28 teeth tooth width 25mm outside diameter 75mm SKU: 23211028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-28-teeth-tooth-width-25mm-outside-diameter-75mm-sku-23211028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 27 teeth tooth width 25mm outside diameter 72.5mm SKU: 23211027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-27-teeth-tooth-width-25mm-outside-diameter-72-5mm-sku-23211027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 26 teeth tooth width 25mm outside diameter 70mm SKU: 23211026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-26-teeth-tooth-width-25mm-outside-diameter-70mm-sku-23211026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23211025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23211025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23211024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23211024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 23 teeth tooth width 25mm outside diameter 62.5mm SKU: 23211023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-23-teeth-tooth-width-25mm-outside-diameter-62-5mm-sku-23211023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 22 teeth tooth width 25mm outside diameter 60mm SKU: 23211022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-22-teeth-tooth-width-25mm-outside-diameter-60mm-sku-23211022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 21 teeth tooth width 25mm outside diameter 57.5mm SKU: 23211021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-21-teeth-tooth-width-25mm-outside-diameter-57-5mm-sku-23211021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23211020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23211020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 19 teeth tooth width 25mm outside diameter 52.5mm SKU: 23211019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-19-teeth-tooth-width-25mm-outside-diameter-52-5mm-sku-23211019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23211018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23211018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 17 teeth tooth width 25mm outside diameter 47.5mm SKU: 23211017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-17-teeth-tooth-width-25mm-outside-diameter-47-5mm-sku-23211017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 16 teeth tooth width 25mm outside diameter 45mm SKU: 23211016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-16-teeth-tooth-width-25mm-outside-diameter-45mm-sku-23211016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23211015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23211015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 14 teeth tooth width 25mm outside diameter 40mm SKU: 23211014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-14-teeth-tooth-width-25mm-outside-diameter-40mm-sku-23211014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 13 teeth tooth width 25mm outside diameter 37.5mm SKU: 23211013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-13-teeth-tooth-width-25mm-outside-diameter-37-5mm-sku-23211013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm SKU: 23211012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-12-teeth-tooth-width-25mm-outside-diameter-35mm-sku-23211012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 110 teeth tooth width 20mm outside diameter 280mm SKU: 23211000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-110-teeth-tooth-width-20mm-outside-diameter-280mm-sku-23211000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 100 teeth tooth width 20mm outside diameter 255mm SKU: 23210000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-100-teeth-tooth-width-20mm-outside-diameter-255mm-sku-23210000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 95 teeth tooth width 20mm outside diameter 242.5mm SKU: 23209500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-95-teeth-tooth-width-20mm-outside-diameter-242-5mm-sku-23209500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 90 teeth tooth width 20mm outside diameter 230mm SKU: 23209000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-90-teeth-tooth-width-20mm-outside-diameter-230mm-sku-23209000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 85 teeth tooth width 20mm outside diameter 217.5mm SKU: 23208500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-85-teeth-tooth-width-20mm-outside-diameter-217-5mm-sku-23208500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 82 teeth tooth width 20mm outside diameter 210mm SKU: 23208200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-82-teeth-tooth-width-20mm-outside-diameter-210mm-sku-23208200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 80 teeth tooth width 20mm outside diameter 205mm SKU: 23208000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-80-teeth-tooth-width-20mm-outside-diameter-205mm-sku-23208000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 75 teeth tooth width 20mm outside diameter 192.5mm SKU: 23207500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-75-teeth-tooth-width-20mm-outside-diameter-192-5mm-sku-23207500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 72 teeth tooth width 20mm outside diameter 185mm SKU: 23207200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-72-teeth-tooth-width-20mm-outside-diameter-185mm-sku-23207200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 70 teeth tooth width 20mm outside diameter 180mm SKU: 23207000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-70-teeth-tooth-width-20mm-outside-diameter-180mm-sku-23207000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 65 teeth tooth width 20mm outside diameter 167.5mm SKU: 23206500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-65-teeth-tooth-width-20mm-outside-diameter-167-5mm-sku-23206500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 62 teeth tooth width 20mm outside diameter 160mm SKU: 23206200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-62-teeth-tooth-width-20mm-outside-diameter-160mm-sku-23206200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 60 teeth tooth width 20mm outside diameter 155mm SKU: 23206000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-60-teeth-tooth-width-20mm-outside-diameter-155mm-sku-23206000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Clamp collar double-split aluminium anodized bore 7mm with screws DIN 912 A2-70 SKU: 62367407](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-7mm-with-screws-din-912-a2-70-sku-62367407/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 6mm with screws DIN 912 A2-70 SKU: 62367406](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-6mm-with-screws-din-912-a2-70-sku-62367406/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 5mm with screws DIN 912 A2-70 SKU: 62367405](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-5mm-with-screws-din-912-a2-70-sku-62367405/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 4mm with screws DIN 912 A2-70 SKU: 62367404](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-4mm-with-screws-din-912-a2-70-sku-62367404/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 3mm with screws DIN 912 A2-70 SKU: 62367403](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-3mm-with-screws-din-912-a2-70-sku-62367403/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 50mm with screw DIN 912 A2-70 SKU: 62367150](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-50mm-with-screw-din-912-a2-70-sku-62367150/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 48mm with screw DIN 912 A2-70 SKU: 62367148](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-48mm-with-screw-din-912-a2-70-sku-62367148/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 45mm with screw DIN 912 A2-70 SKU: 62367145](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-45mm-with-screw-din-912-a2-70-sku-62367145/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 42mm with screw DIN 912 A2-70 SKU: 62367142](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-42mm-with-screw-din-912-a2-70-sku-62367142/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 40mm with screw DIN 912 A2-70 SKU: 62367140](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-40mm-with-screw-din-912-a2-70-sku-62367140/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 38mm with screw DIN 912 A2-70 SKU: 62367138](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-38mm-with-screw-din-912-a2-70-sku-62367138/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 36mm with screw DIN 912 A2-70 SKU: 62367136](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-36mm-with-screw-din-912-a2-70-sku-62367136/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 35mm with screw DIN 912 A2-70 SKU: 62367135](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-35mm-with-screw-din-912-a2-70-sku-62367135/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 34mm with screw DIN 912 A2-70 SKU: 62367134](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-34mm-with-screw-din-912-a2-70-sku-62367134/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 32mm with screw DIN 912 A2-70 SKU: 62367132](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-32mm-with-screw-din-912-a2-70-sku-62367132/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 30mm with screw DIN 912 A2-70 SKU: 62367130](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-30mm-with-screw-din-912-a2-70-sku-62367130/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 28mm with screw DIN 912 A2-70 SKU: 62367128](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-28mm-with-screw-din-912-a2-70-sku-62367128/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 26mm with screw DIN 912 A2-70 SKU: 62367126](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-26mm-with-screw-din-912-a2-70-sku-62367126/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 25mm with screw DIN 912 A2-70 SKU: 62367125](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-25mm-with-screw-din-912-a2-70-sku-62367125/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 24mm with screw DIN 912 A2-70 SKU: 62367124](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-24mm-with-screw-din-912-a2-70-sku-62367124/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 23mm with screw DIN 912 A2-70 SKU: 62367123](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-23mm-with-screw-din-912-a2-70-sku-62367123/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 22mm with screw DIN 912 A2-70 SKU: 62367122](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-22mm-with-screw-din-912-a2-70-sku-62367122/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 21mm with screw DIN 912 A2-70 SKU: 62367121](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-21mm-with-screw-din-912-a2-70-sku-62367121/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 20mm with screw DIN 912 A2-70 SKU: 62367120](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-20mm-with-screw-din-912-a2-70-sku-62367120/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 19mm with screw DIN 912 A2-70 SKU: 62367119](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-19mm-with-screw-din-912-a2-70-sku-62367119/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 18mm with screw DIN 912 A2-70 SKU: 62367118](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-18mm-with-screw-din-912-a2-70-sku-62367118/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 17mm with screw DIN 912 A2-70 SKU: 62367117](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-17mm-with-screw-din-912-a2-70-sku-62367117/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 16mm with screw DIN 912 A2-70 SKU: 62367116](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-16mm-with-screw-din-912-a2-70-sku-62367116/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 15mm with screw DIN 912 A2-70 SKU: 62367115](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-15mm-with-screw-din-912-a2-70-sku-62367115/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 14mm with screw DIN 912 A2-70 SKU: 62367114](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-14mm-with-screw-din-912-a2-70-sku-62367114/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 13mm with screw DIN 912 A2-70 SKU: 62367113](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-13mm-with-screw-din-912-a2-70-sku-62367113/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 12mm with screw DIN 912 A2-70 SKU: 62367112](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-12mm-with-screw-din-912-a2-70-sku-62367112/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 11mm with screw DIN 912 A2-70 SKU: 62367111](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-11mm-with-screw-din-912-a2-70-sku-62367111/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 10mm with screw DIN 912 A2-70 SKU: 62367110](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-10mm-with-screw-din-912-a2-70-sku-62367110/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 9mm with screw DIN 912 A2-70 SKU: 62367109](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-9mm-with-screw-din-912-a2-70-sku-62367109/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 8mm with screw DIN 912 A2-70 SKU: 62367108](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-8mm-with-screw-din-912-a2-70-sku-62367108/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 7mm with screw DIN 912 A2-70 SKU: 62367107](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-7mm-with-screw-din-912-a2-70-sku-62367107/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 6mm with screw DIN 912 A2-70 SKU: 62367106](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-6mm-with-screw-din-912-a2-70-sku-62367106/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 5mm with screw DIN 912 A2-70 SKU: 62367105](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-5mm-with-screw-din-912-a2-70-sku-62367105/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore mm with screw DIN 912 A2-70 SKU: 62367104](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-mm-with-screw-din-912-a2-70-sku-62367104/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split aluminium anodized bore 3mm with screw DIN 912 A2-70 SKU: 62367103](https://maedler.in/product/clamp-collar-single-split-aluminium-anodized-bore-3mm-with-screw-din-912-a2-70-sku-62367103/): Material: Aluminium. Screws made of burnished steel. Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 50mm with bolts DIN 912 A2-70 SKU: 62366450](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-50mm-with-bolts-din-912-a2-70-sku-62366450/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 48mm with bolts DIN 912 A2-70 SKU: 62366448](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-48mm-with-bolts-din-912-a2-70-sku-62366448/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 45mm with bolts DIN 912 A2-70 SKU: 62366445](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-45mm-with-bolts-din-912-a2-70-sku-62366445/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 42mm with bolts DIN 912 A2-70 SKU: 62366442](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-42mm-with-bolts-din-912-a2-70-sku-62366442/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 40mm with bolts DIN 912 A2-70 type S SKU: 62366440S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-40mm-with-bolts-din-912-a2-70-type-s-sku-62366440s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 40mm with bolts DIN 912 A2-70 SKU: 62366440](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-40mm-with-bolts-din-912-a2-70-sku-62366440/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 38mm with bolts DIN 912 A2-70 type S SKU: 62366438S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-38mm-with-bolts-din-912-a2-70-type-s-sku-62366438s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 38mm with bolts DIN 912 A2-70 SKU: 62366438](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-38mm-with-bolts-din-912-a2-70-sku-62366438/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 36mm with bolts DIN 912 A2-70 SKU: 62366436](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-36mm-with-bolts-din-912-a2-70-sku-62366436/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 35mm with bolts DIN 912 A2-70 type S SKU: 62366435S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-35mm-with-bolts-din-912-a2-70-type-s-sku-62366435s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 35mm with bolts DIN 912 A2-70 SKU: 62366435](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-35mm-with-bolts-din-912-a2-70-sku-62366435/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 34mm with bolts DIN 912 A2-70 SKU: 62366434](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-34mm-with-bolts-din-912-a2-70-sku-62366434/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 32mm with bolts DIN 912 A2-70 type S SKU: 62366432S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-32mm-with-bolts-din-912-a2-70-type-s-sku-62366432s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 32mm with bolts DIN 912 A2-70 SKU: 62366432](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-32mm-with-bolts-din-912-a2-70-sku-62366432/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 30mm with bolts DIN 912 A2-70 type S SKU: 62366430S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-30mm-with-bolts-din-912-a2-70-type-s-sku-62366430s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 30mm with bolts DIN 912 A2-70 SKU: 62366430](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-30mm-with-bolts-din-912-a2-70-sku-62366430/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 28mm with bolts DIN 912 A2-70 SKU: 62366428](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-28mm-with-bolts-din-912-a2-70-sku-62366428/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 26mm with bolts DIN 912 A2-70 SKU: 62366426](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-26mm-with-bolts-din-912-a2-70-sku-62366426/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 25mm with bolts DIN 912 A2-70 type S SKU: 62366425S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-25mm-with-bolts-din-912-a2-70-type-s-sku-62366425s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 25mm with bolts DIN 912 A2-70 SKU: 62366425](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-25mm-with-bolts-din-912-a2-70-sku-62366425/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 24mm with bolts DIN 912 A2-70 type S SKU: 62366424S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-24mm-with-bolts-din-912-a2-70-type-s-sku-62366424s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 24mm with bolts DIN 912 A2-70 SKU: 62366424](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-24mm-with-bolts-din-912-a2-70-sku-62366424/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 23mm with bolts DIN 912 A2-70 SKU: 62366423](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-23mm-with-bolts-din-912-a2-70-sku-62366423/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 22mm with bolts DIN 912 A2-70 SKU: 62366422](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-22mm-with-bolts-din-912-a2-70-sku-62366422/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 21mm with bolts DIN 912 A2-70 SKU: 62366421](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-21mm-with-bolts-din-912-a2-70-sku-62366421/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 20mm with bolts DIN 912 A2-70 type S SKU: 62366420S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-20mm-with-bolts-din-912-a2-70-type-s-sku-62366420s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 20mm with bolts DIN 912 A2-70 SKU: 62366420](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-20mm-with-bolts-din-912-a2-70-sku-62366420/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 19mm with bolts DIN 912 A2-70 SKU: 62366419](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-19mm-with-bolts-din-912-a2-70-sku-62366419/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 18mm with bolts DIN 912 A2-70 SKU: 62366418](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-18mm-with-bolts-din-912-a2-70-sku-62366418/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 17mm with bolts DIN 912 A2-70 SKU: 62366417](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-17mm-with-bolts-din-912-a2-70-sku-62366417/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 16mm with bolts DIN 912 A2-70 type S SKU: 62366416S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-16mm-with-bolts-din-912-a2-70-type-s-sku-62366416s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 16mm with bolts DIN 912 A2-70 SKU: 62366416](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-16mm-with-bolts-din-912-a2-70-sku-62366416/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 15mm with bolts DIN 912 A2-70 type S SKU: 62366415S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-15mm-with-bolts-din-912-a2-70-type-s-sku-62366415s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 15mm with bolts DIN 912 A2-70 SKU: 62366415](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-15mm-with-bolts-din-912-a2-70-sku-62366415/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 14mm with bolts DIN 912 A2-70 type S SKU: 62366414S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-14mm-with-bolts-din-912-a2-70-type-s-sku-62366414s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 14mm with bolts DIN 912 A2-70 SKU: 62366414](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-14mm-with-bolts-din-912-a2-70-sku-62366414/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 13mm with bolts DIN 912 A2-70 SKU: 62366413](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-13mm-with-bolts-din-912-a2-70-sku-62366413/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 12mm with bolts DIN 912 A2-70 type S SKU: 62366412S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-12mm-with-bolts-din-912-a2-70-type-s-sku-62366412s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 12mm with bolts DIN 912 A2-70 SKU: 62366412](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-12mm-with-bolts-din-912-a2-70-sku-62366412/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 11mm with bolts DIN 912 A2-70 SKU: 62366411](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-11mm-with-bolts-din-912-a2-70-sku-62366411/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 10mm with bolts DIN 912 A2-70 type S SKU: 62366410S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-10mm-with-bolts-din-912-a2-70-type-s-sku-62366410s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 10mm with bolts DIN 912 A2-70 SKU: 62366410](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-10mm-with-bolts-din-912-a2-70-sku-62366410/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 9mm with bolts DIN 912 A2-70 SKU: 62366409](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-9mm-with-bolts-din-912-a2-70-sku-62366409/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 8mm with bolts DIN 912 A2-70 type S SKU: 62366408S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-8mm-with-bolts-din-912-a2-70-type-s-sku-62366408s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 8mm with bolts DIN 912 A2-70 SKU: 62366408](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-8mm-with-bolts-din-912-a2-70-sku-62366408/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 7mm with bolts DIN 912 A2-70 SKU: 62366407](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-7mm-with-bolts-din-912-a2-70-sku-62366407/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 6mm with bolts DIN 912 A2-70 type S SKU: 62366406S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-6mm-with-bolts-din-912-a2-70-type-s-sku-62366406s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 6mm with bolts DIN 912 A2-70 SKU: 62366406](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-6mm-with-bolts-din-912-a2-70-sku-62366406/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 5mm with bolts DIN 912 A2-70 type S SKU: 62366405S](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-5mm-with-bolts-din-912-a2-70-type-s-sku-62366405s/): Material: aluminium, screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split aluminium bore 5mm with bolts DIN 912 A2-70 SKU: 62366405](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-5mm-with-bolts-din-912-a2-70-sku-62366405/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 4mm with bolts DIN 912 A2-70 SKU: 62366404](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-4mm-with-bolts-din-912-a2-70-sku-62366404/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium bore 3mm with bolts DIN 912 A2-70 SKU: 62366403](https://maedler.in/product/clamp-collar-double-split-aluminium-bore-3mm-with-bolts-din-912-a2-70-sku-62366403/): Material: Aluminium. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Quick-release shaft collar aluminium black anodized bore 50mm SKU: 62366250](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-50mm-sku-62366250/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 48mm SKU: 62366248](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-48mm-sku-62366248/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 45mm SKU: 62366245](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-45mm-sku-62366245/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 42mm SKU: 62366242](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-42mm-sku-62366242/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 40mm SKU: 62366240](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-40mm-sku-62366240/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 38mm SKU: 62366238](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-38mm-sku-62366238/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Quick-release shaft collar aluminium black anodized bore 35mm SKU: 62366235](https://maedler.in/product/quick-release-shaft-collar-aluminium-black-anodized-bore-35mm-sku-62366235/): Material: Aluminium, black anodized. Eccentric lever gold-colored anodized. Screw and axis stainless steel. Features: With eccentric lever. Easy to mount and quickly to readjust. Does not damage the shaft. Even distribution of clamping force. The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated. - [Spur gear made of steel C45 with hub module 4 80 teeth tooth width 30mm outside diameter 328mm SKU: 23408000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-80-teeth-tooth-width-30mm-outside-diameter-328mm-sku-23408000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 76 teeth tooth width 30mm outside diameter 312mm SKU: 23407600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-76-teeth-tooth-width-30mm-outside-diameter-312mm-sku-23407600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 75 teeth tooth width 30mm outside diameter 308mm SKU: 23407500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-75-teeth-tooth-width-30mm-outside-diameter-308mm-sku-23407500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 72 teeth tooth width 30mm outside diameter 296mm SKU: 23407200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-72-teeth-tooth-width-30mm-outside-diameter-296mm-sku-23407200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 70 teeth tooth width 30mm outside diameter 288mm SKU: 23407000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-70-teeth-tooth-width-30mm-outside-diameter-288mm-sku-23407000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 67 teeth tooth width 30mm outside diameter 276mm SKU: 23406700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-67-teeth-tooth-width-30mm-outside-diameter-276mm-sku-23406700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 65 teeth tooth width 30mm outside diameter 268mm SKU: 23406500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-65-teeth-tooth-width-30mm-outside-diameter-268mm-sku-23406500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 60 teeth tooth width 30mm outside diameter 248mm SKU: 23406000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-60-teeth-tooth-width-30mm-outside-diameter-248mm-sku-23406000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 58 teeth tooth width 30mm outside diameter 240mm SKU: 23405800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-58-teeth-tooth-width-30mm-outside-diameter-240mm-sku-23405800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 56 teeth tooth width 30mm outside diameter 232mm SKU: 23405600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-56-teeth-tooth-width-30mm-outside-diameter-232mm-sku-23405600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 55 teeth tooth width 30mm outside diameter 228mm SKU: 23405500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-55-teeth-tooth-width-30mm-outside-diameter-228mm-sku-23405500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 54 teeth tooth width 30mm outside diameter 224mm SKU: 23405400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-54-teeth-tooth-width-30mm-outside-diameter-224mm-sku-23405400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 52 teeth tooth width 30mm outside diameter 216mm SKU: 23405200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-52-teeth-tooth-width-30mm-outside-diameter-216mm-sku-23405200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 50 teeth tooth width 30mm outside diameter 208mm SKU: 23405000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-50-teeth-tooth-width-30mm-outside-diameter-208mm-sku-23405000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 48 teeth tooth width 30mm outside diameter 200mm SKU: 23404800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-48-teeth-tooth-width-30mm-outside-diameter-200mm-sku-23404800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 46 teeth tooth width 30mm outside diameter 192mm SKU: 23404600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-46-teeth-tooth-width-30mm-outside-diameter-192mm-sku-23404600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 45 teeth tooth width 30mm outside diameter 188mm SKU: 23404500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-45-teeth-tooth-width-30mm-outside-diameter-188mm-sku-23404500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 44 teeth tooth width 30mm outside diameter 184mm SKU: 23404400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-44-teeth-tooth-width-30mm-outside-diameter-184mm-sku-23404400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 42 teeth tooth width 30mm outside diameter 176mm SKU: 23404200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-42-teeth-tooth-width-30mm-outside-diameter-176mm-sku-23404200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 40 teeth tooth width 30mm outside diameter 168mm SKU: 23404000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-40-teeth-tooth-width-30mm-outside-diameter-168mm-sku-23404000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 38 teeth tooth width 30mm outside diameter 160mm SKU: 23403800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-38-teeth-tooth-width-30mm-outside-diameter-160mm-sku-23403800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 36 teeth tooth width 30mm outside diameter 152mm SKU: 23403600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-36-teeth-tooth-width-30mm-outside-diameter-152mm-sku-23403600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 35 teeth tooth width 30mm outside diameter 148mm SKU: 23403500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-35-teeth-tooth-width-30mm-outside-diameter-148mm-sku-23403500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 32 teeth tooth width 30mm outside diameter 136mm SKU: 23403200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-32-teeth-tooth-width-30mm-outside-diameter-136mm-sku-23403200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 30 teeth tooth width 30mm outside diameter 128mm SKU: 23403000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-30-teeth-tooth-width-30mm-outside-diameter-128mm-sku-23403000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 28 teeth tooth width 30mm outside diameter 120mm SKU: 23402800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-28-teeth-tooth-width-30mm-outside-diameter-120mm-sku-23402800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 27 teeth tooth width 30mm outside diameter 116mm SKU: 23402700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-27-teeth-tooth-width-30mm-outside-diameter-116mm-sku-23402700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 26 teeth tooth width 30mm outside diameter 112mm SKU: 23402600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-26-teeth-tooth-width-30mm-outside-diameter-112mm-sku-23402600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 25 teeth tooth width 30mm outside diameter 108mm SKU: 23402500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-25-teeth-tooth-width-30mm-outside-diameter-108mm-sku-23402500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 24 teeth tooth width 30mm outside diameter 104mm SKU: 23402400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-24-teeth-tooth-width-30mm-outside-diameter-104mm-sku-23402400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 23 teeth tooth width 30mm outside diameter 100mm SKU: 23402300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-23-teeth-tooth-width-30mm-outside-diameter-100mm-sku-23402300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 22 teeth tooth width 30mm outside diameter 96mm SKU: 23402200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-22-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23402200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 21 teeth tooth width 30mm outside diameter 92mm SKU: 23402100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-21-teeth-tooth-width-30mm-outside-diameter-92mm-sku-23402100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 20 teeth tooth width 30mm outside diameter 88mm SKU: 23402000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-20-teeth-tooth-width-30mm-outside-diameter-88mm-sku-23402000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 19 teeth tooth width 30mm outside diameter 84mm SKU: 23401900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-19-teeth-tooth-width-30mm-outside-diameter-84mm-sku-23401900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 18 teeth tooth width 30mm outside diameter 80mm SKU: 23401800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-18-teeth-tooth-width-30mm-outside-diameter-80mm-sku-23401800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 17 teeth tooth width 30mm outside diameter 76mm SKU: 23401700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-17-teeth-tooth-width-30mm-outside-diameter-76mm-sku-23401700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 16 teeth tooth width 30mm outside diameter 72mm SKU: 23401600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-16-teeth-tooth-width-30mm-outside-diameter-72mm-sku-23401600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 15 teeth tooth width 30mm outside diameter 68mm SKU: 23401500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-15-teeth-tooth-width-30mm-outside-diameter-68mm-sku-23401500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 14 teeth tooth width 30mm outside diameter 64mm SKU: 23401400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-14-teeth-tooth-width-30mm-outside-diameter-64mm-sku-23401400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 13 teeth tooth width 30mm outside diameter 60mm SKU: 23401300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-13-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23401300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 12 teeth tooth width 30mm outside diameter 56mm SKU: 23401200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-12-teeth-tooth-width-30mm-outside-diameter-56mm-sku-23401200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 120 teeth tooth width 25mm outside diameter 366mm SKU: 23312000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-120-teeth-tooth-width-25mm-outside-diameter-366mm-sku-23312000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 114 teeth tooth width 25mm outside diameter 348mm SKU: 23311400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-114-teeth-tooth-width-25mm-outside-diameter-348mm-sku-23311400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 120 teeth tooth width 30mm outside diameter 366mm SKU: 23311120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-120-teeth-tooth-width-30mm-outside-diameter-366mm-sku-23311120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 100 teeth tooth width 30mm outside diameter 306mm SKU: 23311100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-100-teeth-tooth-width-30mm-outside-diameter-306mm-sku-23311100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 90 teeth tooth width 30mm outside diameter 276mm SKU: 23311090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-90-teeth-tooth-width-30mm-outside-diameter-276mm-sku-23311090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 75 teeth tooth width 30mm outside diameter 231mm SKU: 23311075](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-75-teeth-tooth-width-30mm-outside-diameter-231mm-sku-23311075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 70 teeth tooth width 30mm outside diameter 216mm SKU: 23311070](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-70-teeth-tooth-width-30mm-outside-diameter-216mm-sku-23311070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 65 teeth tooth width 30mm outside diameter 201mm SKU: 23311065](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-65-teeth-tooth-width-30mm-outside-diameter-201mm-sku-23311065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 23311060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-23311060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 23311050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-23311050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 23311048](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-23311048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 47 teeth tooth width 30mm outside diameter 147mm SKU: 23311047](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-47-teeth-tooth-width-30mm-outside-diameter-147mm-sku-23311047/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 46 teeth tooth width 30mm outside diameter 144mm SKU: 23311046](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-46-teeth-tooth-width-30mm-outside-diameter-144mm-sku-23311046/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 45 teeth tooth width 30mm outside diameter 141mm SKU: 23311045](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-45-teeth-tooth-width-30mm-outside-diameter-141mm-sku-23311045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 44 teeth tooth width 30mm outside diameter 138mm SKU: 23311044](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-44-teeth-tooth-width-30mm-outside-diameter-138mm-sku-23311044/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 43 teeth tooth width 30mm outside diameter 135mm SKU: 23311043](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-43-teeth-tooth-width-30mm-outside-diameter-135mm-sku-23311043/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 42 teeth tooth width 30mm outside diameter 132mm SKU: 23311042](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-42-teeth-tooth-width-30mm-outside-diameter-132mm-sku-23311042/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 41 teeth tooth width 30mm outside diameter 129mm SKU: 23311041](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-41-teeth-tooth-width-30mm-outside-diameter-129mm-sku-23311041/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23311040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23311040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 39 teeth tooth width 30mm outside diameter 123mm SKU: 23311039](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-39-teeth-tooth-width-30mm-outside-diameter-123mm-sku-23311039/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 38 teeth tooth width 30mm outside diameter 120mm SKU: 23311038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-38-teeth-tooth-width-30mm-outside-diameter-120mm-sku-23311038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 37 teeth tooth width 30mm outside diameter 117mm SKU: 23311037](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-37-teeth-tooth-width-30mm-outside-diameter-117mm-sku-23311037/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23311036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23311036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 35 teeth tooth width 30mm outside diameter 111mm SKU: 23311035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-35-teeth-tooth-width-30mm-outside-diameter-111mm-sku-23311035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 34 teeth tooth width 30mm outside diameter 108mm SKU: 23311034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-34-teeth-tooth-width-30mm-outside-diameter-108mm-sku-23311034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 33 teeth tooth width 30mm outside diameter 105mm SKU: 23311033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-33-teeth-tooth-width-30mm-outside-diameter-105mm-sku-23311033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 32 teeth tooth width 30mm outside diameter 102mm SKU: 23311032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-32-teeth-tooth-width-30mm-outside-diameter-102mm-sku-23311032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 31 teeth tooth width 30mm outside diameter 99mm SKU: 23311031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-31-teeth-tooth-width-30mm-outside-diameter-99mm-sku-23311031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23311030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23311030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 29 teeth tooth width 30mm outside diameter 93mm SKU: 23311029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-29-teeth-tooth-width-30mm-outside-diameter-93mm-sku-23311029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 28 teeth tooth width 30mm outside diameter 90mm SKU: 23311028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-28-teeth-tooth-width-30mm-outside-diameter-90mm-sku-23311028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 27 teeth tooth width 30mm outside diameter 87mm SKU: 23311027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-27-teeth-tooth-width-30mm-outside-diameter-87mm-sku-23311027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 26 teeth tooth width 30mm outside diameter 84mm SKU: 23311026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-26-teeth-tooth-width-30mm-outside-diameter-84mm-sku-23311026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23311025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23311025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23311024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23311024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 23 teeth tooth width 30mm outside diameter 75mm SKU: 23311023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-23-teeth-tooth-width-30mm-outside-diameter-75mm-sku-23311023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 22 teeth tooth width 30mm outside diameter 72mm SKU: 23311022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-22-teeth-tooth-width-30mm-outside-diameter-72mm-sku-23311022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 21 teeth tooth width 30mm outside diameter 69mm SKU: 23311021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-21-teeth-tooth-width-30mm-outside-diameter-69mm-sku-23311021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23311020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23311020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 19 teeth tooth width 30mm outside diameter 63mm SKU: 23311019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-19-teeth-tooth-width-30mm-outside-diameter-63mm-sku-23311019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23311018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23311018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 17 teeth tooth width 30mm outside diameter 57mm SKU: 23311017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-17-teeth-tooth-width-30mm-outside-diameter-57mm-sku-23311017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 16 teeth tooth width 30mm outside diameter 54mm SKU: 23311016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-16-teeth-tooth-width-30mm-outside-diameter-54mm-sku-23311016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23311015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23311015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 14 teeth tooth width 30mm outside diameter 48mm SKU: 23311014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-14-teeth-tooth-width-30mm-outside-diameter-48mm-sku-23311014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 13 teeth tooth width 30mm outside diameter 45mm SKU: 23311013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-13-teeth-tooth-width-30mm-outside-diameter-45mm-sku-23311013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 12 teeth tooth width 30mm outside diameter 42mm SKU: 23311012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-12-teeth-tooth-width-30mm-outside-diameter-42mm-sku-23311012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 100 teeth tooth width 25mm outside diameter 306mm SKU: 23310000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-100-teeth-tooth-width-25mm-outside-diameter-306mm-sku-23310000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 90 teeth tooth width 25mm outside diameter 276mm SKU: 23309000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-90-teeth-tooth-width-25mm-outside-diameter-276mm-sku-23309000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 80 teeth tooth width 25mm outside diameter 246mm SKU: 23308000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-80-teeth-tooth-width-25mm-outside-diameter-246mm-sku-23308000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 76 teeth tooth width 25mm outside diameter 234mm SKU: 23307600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-76-teeth-tooth-width-25mm-outside-diameter-234mm-sku-23307600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 75 teeth tooth width 25mm outside diameter 231mm SKU: 23307500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-75-teeth-tooth-width-25mm-outside-diameter-231mm-sku-23307500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 72 teeth tooth width 25mm outside diameter 222mm SKU: 23307200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-72-teeth-tooth-width-25mm-outside-diameter-222mm-sku-23307200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 70 teeth tooth width 25mm outside diameter 216mm SKU: 23307000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-70-teeth-tooth-width-25mm-outside-diameter-216mm-sku-23307000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 67 teeth tooth width 25mm outside diameter 207mm SKU: 23306700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-67-teeth-tooth-width-25mm-outside-diameter-207mm-sku-23306700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 65 teeth tooth width 25mm outside diameter 201mm SKU: 23306500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-65-teeth-tooth-width-25mm-outside-diameter-201mm-sku-23306500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 60 teeth tooth width 25mm outside diameter 186mm SKU: 23306000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-60-teeth-tooth-width-25mm-outside-diameter-186mm-sku-23306000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 58 teeth tooth width 25mm outside diameter 180mm SKU: 23305800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-58-teeth-tooth-width-25mm-outside-diameter-180mm-sku-23305800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Flanged bush BBP bore 40mm polyamide 6.6 outer diameter 48mm length 40mm flange diameter 58mm SKU: 62386300](https://maedler.in/product/flanged-bush-bbp-bore-40mm-polyamide-6-6-outer-diameter-48mm-length-40mm-flange-diameter-58mm-sku-62386300/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 40mm polyamide 6.6 outer diameter 44mm length 40mm flange diameter 54mm SKU: 62386200](https://maedler.in/product/flanged-bush-bbp-bore-40mm-polyamide-6-6-outer-diameter-44mm-length-40mm-flange-diameter-54mm-sku-62386200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 32mm polyamide 6.6 outer diameter 40mm length 30mm flange diameter 50mm SKU: 62385600](https://maedler.in/product/flanged-bush-bbp-bore-32mm-polyamide-6-6-outer-diameter-40mm-length-30mm-flange-diameter-50mm-sku-62385600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 32mm polyamide 6.6 outer diameter 38mm length 30mm flange diameter 48mm SKU: 62385500](https://maedler.in/product/flanged-bush-bbp-bore-32mm-polyamide-6-6-outer-diameter-38mm-length-30mm-flange-diameter-48mm-sku-62385500/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 32mm polyamide 6.6 outer diameter 35mm length 30mm flange diameter 45mm SKU: 62385400](https://maedler.in/product/flanged-bush-bbp-bore-32mm-polyamide-6-6-outer-diameter-35mm-length-30mm-flange-diameter-45mm-sku-62385400/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 30mm polyamide 6.6 outer diameter 38mm length 30mm flange diameter 48mm SKU: 62385200](https://maedler.in/product/flanged-bush-bbp-bore-30mm-polyamide-6-6-outer-diameter-38mm-length-30mm-flange-diameter-48mm-sku-62385200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 30mm polyamide 6.6 outer diameter 35mm length 30mm flange diameter 45mm SKU: 62385100](https://maedler.in/product/flanged-bush-bbp-bore-30mm-polyamide-6-6-outer-diameter-35mm-length-30mm-flange-diameter-45mm-sku-62385100/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 30mm polyamide 6.6 outer diameter 32mm length 30mm flange diameter 40mm SKU: 62385000](https://maedler.in/product/flanged-bush-bbp-bore-30mm-polyamide-6-6-outer-diameter-32mm-length-30mm-flange-diameter-40mm-sku-62385000/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 28mm polyamide 6.6 outer diameter 38mm length 30mm flange diameter 48mm SKU: 62384800](https://maedler.in/product/flanged-bush-bbp-bore-28mm-polyamide-6-6-outer-diameter-38mm-length-30mm-flange-diameter-48mm-sku-62384800/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 28mm polyamide 6.6 outer diameter 32mm length 30mm flange diameter 40mm SKU: 62384600](https://maedler.in/product/flanged-bush-bbp-bore-28mm-polyamide-6-6-outer-diameter-32mm-length-30mm-flange-diameter-40mm-sku-62384600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 25mm polyamide 6.6 outer diameter 35mm length 30mm flange diameter 45mm SKU: 62384300](https://maedler.in/product/flanged-bush-bbp-bore-25mm-polyamide-6-6-outer-diameter-35mm-length-30mm-flange-diameter-45mm-sku-62384300/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 25mm polyamide 6.6 outer diameter 35mm length 20mm flange diameter 45mm SKU: 62384200](https://maedler.in/product/flanged-bush-bbp-bore-25mm-polyamide-6-6-outer-diameter-35mm-length-20mm-flange-diameter-45mm-sku-62384200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 25mm polyamide 6.6 outer diameter 32mm length 20mm flange diameter 40mm SKU: 62384100](https://maedler.in/product/flanged-bush-bbp-bore-25mm-polyamide-6-6-outer-diameter-32mm-length-20mm-flange-diameter-40mm-sku-62384100/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 25mm polyamide 6.6 outer diameter 30mm length 20mm flange diameter 36mm SKU: 62384000](https://maedler.in/product/flanged-bush-bbp-bore-25mm-polyamide-6-6-outer-diameter-30mm-length-20mm-flange-diameter-36mm-sku-62384000/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 20mm polyamide 6.6 outer diameter 30mm length 20mm flange diameter 36mm SKU: 62383700](https://maedler.in/product/flanged-bush-bbp-bore-20mm-polyamide-6-6-outer-diameter-30mm-length-20mm-flange-diameter-36mm-sku-62383700/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 20mm polyamide 6.6 outer diameter 26mm length 20mm flange diameter 32mm SKU: 62383600](https://maedler.in/product/flanged-bush-bbp-bore-20mm-polyamide-6-6-outer-diameter-26mm-length-20mm-flange-diameter-32mm-sku-62383600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 20mm polyamide 6.6 outer diameter 26mm length 15mm flange diameter 32mm SKU: 62383500](https://maedler.in/product/flanged-bush-bbp-bore-20mm-polyamide-6-6-outer-diameter-26mm-length-15mm-flange-diameter-32mm-sku-62383500/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 20mm polyamide 6.6 outer diameter 26mm length 12mm flange diameter 30mm SKU: 62383400](https://maedler.in/product/flanged-bush-bbp-bore-20mm-polyamide-6-6-outer-diameter-26mm-length-12mm-flange-diameter-30mm-sku-62383400/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 20mm polyamide 6.6 outer diameter 25mm length 15mm flange diameter 30mm SKU: 62383300](https://maedler.in/product/flanged-bush-bbp-bore-20mm-polyamide-6-6-outer-diameter-25mm-length-15mm-flange-diameter-30mm-sku-62383300/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 20mm polyamide 6.6 outer diameter 24mm length 15mm flange diameter 30mm SKU: 62383200](https://maedler.in/product/flanged-bush-bbp-bore-20mm-polyamide-6-6-outer-diameter-24mm-length-15mm-flange-diameter-30mm-sku-62383200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 16mm polyamide 6.6 outer diameter 24mm length 15mm flange diameter 30mm SKU: 62382700](https://maedler.in/product/flanged-bush-bbp-bore-16mm-polyamide-6-6-outer-diameter-24mm-length-15mm-flange-diameter-30mm-sku-62382700/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 16mm polyamide 6.6 outer diameter 22mm length 15mm flange diameter 30mm SKU: 62382600](https://maedler.in/product/flanged-bush-bbp-bore-16mm-polyamide-6-6-outer-diameter-22mm-length-15mm-flange-diameter-30mm-sku-62382600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 16mm polyamide 6.6 outer diameter 20mm length 15mm flange diameter 28mm SKU: 62382500](https://maedler.in/product/flanged-bush-bbp-bore-16mm-polyamide-6-6-outer-diameter-20mm-length-15mm-flange-diameter-28mm-sku-62382500/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 14mm polyamide 6.6 outer diameter 20mm length 24mm flange diameter 30mm SKU: 62381900](https://maedler.in/product/flanged-bush-bbp-bore-14mm-polyamide-6-6-outer-diameter-20mm-length-24mm-flange-diameter-30mm-sku-62381900/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 12mm polyamide 6.6 outer diameter 16mm length 10mm flange diameter 20mm SKU: 62381600](https://maedler.in/product/flanged-bush-bbp-bore-12mm-polyamide-6-6-outer-diameter-16mm-length-10mm-flange-diameter-20mm-sku-62381600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 12mm polyamide 6.6 outer diameter 14mm length 10mm flange diameter 20mm SKU: 62381500](https://maedler.in/product/flanged-bush-bbp-bore-12mm-polyamide-6-6-outer-diameter-14mm-length-10mm-flange-diameter-20mm-sku-62381500/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 10mm polyamide 6.6 outer diameter 16mm length 10mm flange diameter 20mm SKU: 62381300](https://maedler.in/product/flanged-bush-bbp-bore-10mm-polyamide-6-6-outer-diameter-16mm-length-10mm-flange-diameter-20mm-sku-62381300/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 10mm polyamide 6.6 outer diameter 14mm length 10mm flange diameter 20mm SKU: 62381200](https://maedler.in/product/flanged-bush-bbp-bore-10mm-polyamide-6-6-outer-diameter-14mm-length-10mm-flange-diameter-20mm-sku-62381200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 10mm polyamide 6.6 outer diameter 12mm length 6mm flange diameter 16mm SKU: 62381100](https://maedler.in/product/flanged-bush-bbp-bore-10mm-polyamide-6-6-outer-diameter-12mm-length-6mm-flange-diameter-16mm-sku-62381100/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 8mm polyamide 6.6 outer diameter 14mm length 10mm flange diameter 20mm SKU: 62380900](https://maedler.in/product/flanged-bush-bbp-bore-8mm-polyamide-6-6-outer-diameter-14mm-length-10mm-flange-diameter-20mm-sku-62380900/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 8mm polyamide 6.6 outer diameter 12mm length 6mm flange diameter 16mm SKU: 62380800](https://maedler.in/product/flanged-bush-bbp-bore-8mm-polyamide-6-6-outer-diameter-12mm-length-6mm-flange-diameter-16mm-sku-62380800/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 6mm polyamide 6.6 outer diameter 10mm length 8mm flange diameter 15mm SKU: 62380600](https://maedler.in/product/flanged-bush-bbp-bore-6mm-polyamide-6-6-outer-diameter-10mm-length-8mm-flange-diameter-15mm-sku-62380600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 60mm polyamide 6.6 outer diameter 70mm length 60mm SKU: 62377400](https://maedler.in/product/bush-bp-bore-60mm-polyamide-6-6-outer-diameter-70mm-length-60mm-sku-62377400/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 54mm polyamide 6.6 outer diameter 62mm length 60mm SKU: 62377100](https://maedler.in/product/bush-bp-bore-54mm-polyamide-6-6-outer-diameter-62mm-length-60mm-sku-62377100/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 50mm polyamide 6.6 outer diameter 60mm length 50mm SKU: 62376900](https://maedler.in/product/bush-bp-bore-50mm-polyamide-6-6-outer-diameter-60mm-length-50mm-sku-62376900/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 50mm polyamide 6.6 outer diameter 56mm length 50mm SKU: 62376800](https://maedler.in/product/bush-bp-bore-50mm-polyamide-6-6-outer-diameter-56mm-length-50mm-sku-62376800/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 40mm polyamide 6.6 outer diameter 50mm length 40mm SKU: 62376400](https://maedler.in/product/bush-bp-bore-40mm-polyamide-6-6-outer-diameter-50mm-length-40mm-sku-62376400/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 40mm polyamide 6.6 outer diameter 48mm length 40mm SKU: 62376300](https://maedler.in/product/bush-bp-bore-40mm-polyamide-6-6-outer-diameter-48mm-length-40mm-sku-62376300/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 40mm polyamide 6.6 outer diameter 45mm length 40mm SKU: 62376200](https://maedler.in/product/bush-bp-bore-40mm-polyamide-6-6-outer-diameter-45mm-length-40mm-sku-62376200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 32mm polyamide 6.6 outer diameter 40mm length 30mm SKU: 62375500](https://maedler.in/product/bush-bp-bore-32mm-polyamide-6-6-outer-diameter-40mm-length-30mm-sku-62375500/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 32mm polyamide 6.6 outer diameter 36mm length 30mm SKU: 62375400](https://maedler.in/product/bush-bp-bore-32mm-polyamide-6-6-outer-diameter-36mm-length-30mm-sku-62375400/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 30mm polyamide 6.6 outer diameter 40mm length 30mm SKU: 62375200](https://maedler.in/product/bush-bp-bore-30mm-polyamide-6-6-outer-diameter-40mm-length-30mm-sku-62375200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 30mm polyamide 6.6 outer diameter 36mm length 30mm SKU: 62375100](https://maedler.in/product/bush-bp-bore-30mm-polyamide-6-6-outer-diameter-36mm-length-30mm-sku-62375100/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 30mm polyamide 6.6 outer diameter 35mm length 20mm SKU: 62375000](https://maedler.in/product/bush-bp-bore-30mm-polyamide-6-6-outer-diameter-35mm-length-20mm-sku-62375000/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 28mm polyamide 6.6 outer diameter 38mm length 19mm SKU: 62374800](https://maedler.in/product/bush-bp-bore-28mm-polyamide-6-6-outer-diameter-38mm-length-19mm-sku-62374800/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 28mm polyamide 6.6 outer diameter 32mm length 20mm SKU: 62374600](https://maedler.in/product/bush-bp-bore-28mm-polyamide-6-6-outer-diameter-32mm-length-20mm-sku-62374600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 25mm polyamide 6.6 outer diameter 35mm length 20mm SKU: 62374300](https://maedler.in/product/bush-bp-bore-25mm-polyamide-6-6-outer-diameter-35mm-length-20mm-sku-62374300/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 25mm polyamide 6.6 outer diameter 32mm length 20mm SKU: 62374200](https://maedler.in/product/bush-bp-bore-25mm-polyamide-6-6-outer-diameter-32mm-length-20mm-sku-62374200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 25mm polyamide 6.6 outer diameter 30mm length 32mm SKU: 62374100](https://maedler.in/product/bush-bp-bore-25mm-polyamide-6-6-outer-diameter-30mm-length-32mm-sku-62374100/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 25mm polyamide 6.6 outer diameter 30mm length 20mm SKU: 62374000](https://maedler.in/product/bush-bp-bore-25mm-polyamide-6-6-outer-diameter-30mm-length-20mm-sku-62374000/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 20mm polyamide 6.6 outer diameter 30mm length 20mm SKU: 62373600](https://maedler.in/product/bush-bp-bore-20mm-polyamide-6-6-outer-diameter-30mm-length-20mm-sku-62373600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 20mm polyamide 6.6 outer diameter 28mm length 20mm SKU: 62373500](https://maedler.in/product/bush-bp-bore-20mm-polyamide-6-6-outer-diameter-28mm-length-20mm-sku-62373500/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 20mm polyamide 6.6 outer diameter 26mm length 20mm SKU: 62373400](https://maedler.in/product/bush-bp-bore-20mm-polyamide-6-6-outer-diameter-26mm-length-20mm-sku-62373400/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 20mm polyamide 6.6 outer diameter 25mm length 15mm SKU: 62373300](https://maedler.in/product/bush-bp-bore-20mm-polyamide-6-6-outer-diameter-25mm-length-15mm-sku-62373300/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 20mm polyamide 6.6 outer diameter 24mm length 15mm SKU: 62373200](https://maedler.in/product/bush-bp-bore-20mm-polyamide-6-6-outer-diameter-24mm-length-15mm-sku-62373200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 16mm polyamide 6.6 outer diameter 24mm length 15mm SKU: 62372700](https://maedler.in/product/bush-bp-bore-16mm-polyamide-6-6-outer-diameter-24mm-length-15mm-sku-62372700/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 16mm polyamide 6.6 outer diameter 22mm length 15mm SKU: 62372600](https://maedler.in/product/bush-bp-bore-16mm-polyamide-6-6-outer-diameter-22mm-length-15mm-sku-62372600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 16mm polyamide 6.6 outer diameter 20mm length 15mm SKU: 62372500](https://maedler.in/product/bush-bp-bore-16mm-polyamide-6-6-outer-diameter-20mm-length-15mm-sku-62372500/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 15mm polyamide 6.6 outer diameter 25mm length 15mm SKU: 62372300](https://maedler.in/product/bush-bp-bore-15mm-polyamide-6-6-outer-diameter-25mm-length-15mm-sku-62372300/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 15mm polyamide 6.6 outer diameter 22mm length 15mm SKU: 62372200](https://maedler.in/product/bush-bp-bore-15mm-polyamide-6-6-outer-diameter-22mm-length-15mm-sku-62372200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 15mm polyamide 6.6 outer diameter 20mm length 15mm SKU: 62372100](https://maedler.in/product/bush-bp-bore-15mm-polyamide-6-6-outer-diameter-20mm-length-15mm-sku-62372100/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 12mm polyamide 6.6 outer diameter 18mm length 14mm SKU: 62371700](https://maedler.in/product/bush-bp-bore-12mm-polyamide-6-6-outer-diameter-18mm-length-14mm-sku-62371700/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 12mm polyamide 6.6 outer diameter 16mm length 10mm SKU: 62371600](https://maedler.in/product/bush-bp-bore-12mm-polyamide-6-6-outer-diameter-16mm-length-10mm-sku-62371600/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 12mm polyamide 6.6 outer diameter 14mm length 10mm SKU: 62371500](https://maedler.in/product/bush-bp-bore-12mm-polyamide-6-6-outer-diameter-14mm-length-10mm-sku-62371500/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 10mm polyamide 6.6 outer diameter 16mm length 10mm SKU: 62371300](https://maedler.in/product/bush-bp-bore-10mm-polyamide-6-6-outer-diameter-16mm-length-10mm-sku-62371300/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 10mm polyamide 6.6 outer diameter 14mm, Länge, 10mm SKU: 62371200](https://maedler.in/product/bush-bp-bore-10mm-polyamide-6-6-outer-diameter-14mm-lange-10mm-sku-62371200/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 10mm polyamide 6.6 outer diameter 12mm length 10mm SKU: 62371100](https://maedler.in/product/bush-bp-bore-10mm-polyamide-6-6-outer-diameter-12mm-length-10mm-sku-62371100/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 8mm polyamide 6.6 outer diameter 14mm length 10mm SKU: 62370900](https://maedler.in/product/bush-bp-bore-8mm-polyamide-6-6-outer-diameter-14mm-length-10mm-sku-62370900/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Bush BP bore 8mm polyamide 6.6 outer diameter 12mm length 10mm SKU: 62370800](https://maedler.in/product/bush-bp-bore-8mm-polyamide-6-6-outer-diameter-12mm-length-10mm-sku-62370800/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Clamp collar double-split aluminium anodized bore 50mm with screws DIN 912 A2-70 SKU: 62367450](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-50mm-with-screws-din-912-a2-70-sku-62367450/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 48mm with screws DIN 912 A2-70 SKU: 62367448](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-48mm-with-screws-din-912-a2-70-sku-62367448/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 45mm with screws DIN 912 A2-70 SKU: 62367445](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-45mm-with-screws-din-912-a2-70-sku-62367445/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 42mm with screws DIN 912 A2-70 SKU: 62367442](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-42mm-with-screws-din-912-a2-70-sku-62367442/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 40mm with screws DIN 912 A2-70 SKU: 62367440](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-40mm-with-screws-din-912-a2-70-sku-62367440/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 38mm with screws DIN 912 A2-70 SKU: 62367438](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-38mm-with-screws-din-912-a2-70-sku-62367438/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 36mm with screws DIN 912 A2-70 SKU: 62367436](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-36mm-with-screws-din-912-a2-70-sku-62367436/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 35mm with screws DIN 912 A2-70 SKU: 62367435](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-35mm-with-screws-din-912-a2-70-sku-62367435/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 34mm with screws DIN 912 A2-70 SKU: 62367434](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-34mm-with-screws-din-912-a2-70-sku-62367434/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 32mm with screws DIN 912 A2-70 SKU: 62367432](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-32mm-with-screws-din-912-a2-70-sku-62367432/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 30mm with screws DIN 912 A2-70 SKU: 62367430](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-30mm-with-screws-din-912-a2-70-sku-62367430/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 28mm with screws DIN 912 A2-70 SKU: 62367428](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-28mm-with-screws-din-912-a2-70-sku-62367428/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 26mm with screws DIN 912 A2-70 SKU: 62367426](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-26mm-with-screws-din-912-a2-70-sku-62367426/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 25mm with screws DIN 912 A2-70 SKU: 62367425](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-25mm-with-screws-din-912-a2-70-sku-62367425/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 24mm with screws DIN 912 A2-70 SKU: 62367424](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-24mm-with-screws-din-912-a2-70-sku-62367424/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 23mm with screws DIN 912 A2-70 SKU: 62367423](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-23mm-with-screws-din-912-a2-70-sku-62367423/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 22mm with screws DIN 912 A2-70 SKU: 62367422](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-22mm-with-screws-din-912-a2-70-sku-62367422/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 21mm with screws DIN 912 A2-70 SKU: 62367421](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-21mm-with-screws-din-912-a2-70-sku-62367421/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 20mm with screws DIN 912 A2-70 SKU: 62367420](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-20mm-with-screws-din-912-a2-70-sku-62367420/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 19mm with screws DIN 912 A2-70 SKU: 62367419](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-19mm-with-screws-din-912-a2-70-sku-62367419/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 18mm with screws DIN 912 A2-70 SKU: 62367418](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-18mm-with-screws-din-912-a2-70-sku-62367418/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 17mm with screws DIN 912 A2-70 SKU: 62367417](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-17mm-with-screws-din-912-a2-70-sku-62367417/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 16mm with screws DIN 912 A2-70 SKU: 62367416](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-16mm-with-screws-din-912-a2-70-sku-62367416/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 15mm with screws DIN 912 A2-70 SKU: 62367415](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-15mm-with-screws-din-912-a2-70-sku-62367415/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 14mm with screws DIN 912 A2-70 SKU: 62367414](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-14mm-with-screws-din-912-a2-70-sku-62367414/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 13mm with screws DIN 912 A2-70 SKU: 62367413](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-13mm-with-screws-din-912-a2-70-sku-62367413/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 12mm with screws DIN 912 A2-70 SKU: 62367412](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-12mm-with-screws-din-912-a2-70-sku-62367412/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 11mm with screws DIN 912 A2-70 SKU: 62367411](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-11mm-with-screws-din-912-a2-70-sku-62367411/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 10mm with screws DIN 912 A2-70 SKU: 62367410](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-10mm-with-screws-din-912-a2-70-sku-62367410/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 9mm with screws DIN 912 A2-70 SKU: 62367409](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-9mm-with-screws-din-912-a2-70-sku-62367409/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split aluminium anodized bore 8mm with screws DIN 912 A2-70 SKU: 62367408](https://maedler.in/product/clamp-collar-double-split-aluminium-anodized-bore-8mm-with-screws-din-912-a2-70-sku-62367408/): Material: Aluminium anodized. Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Spur gear made of steel C45 with hub module 6 25 teeth tooth width 50mm outside diameter 162mm SKU: 23602500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-25-teeth-tooth-width-50mm-outside-diameter-162mm-sku-23602500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 24 teeth tooth width 50mm outside diameter 156mm SKU: 23602400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-24-teeth-tooth-width-50mm-outside-diameter-156mm-sku-23602400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 23 teeth tooth width 50mm outside diameter 150mm SKU: 23602300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-23-teeth-tooth-width-50mm-outside-diameter-150mm-sku-23602300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 22 teeth tooth width 50mm outside diameter 144mm SKU: 23602200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-22-teeth-tooth-width-50mm-outside-diameter-144mm-sku-23602200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 21 teeth tooth width 50mm outside diameter 138mm SKU: 23602100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-21-teeth-tooth-width-50mm-outside-diameter-138mm-sku-23602100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 20 teeth tooth width 50mm outside diameter 132mm SKU: 23602000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-20-teeth-tooth-width-50mm-outside-diameter-132mm-sku-23602000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 19 teeth tooth width 50mm outside diameter 126mm SKU: 23601900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-19-teeth-tooth-width-50mm-outside-diameter-126mm-sku-23601900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 18 teeth tooth width 50mm outside diameter 120mm SKU: 23601800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-18-teeth-tooth-width-50mm-outside-diameter-120mm-sku-23601800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 17 teeth tooth width 50mm outside diameter 114mm SKU: 23601700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-17-teeth-tooth-width-50mm-outside-diameter-114mm-sku-23601700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 16 teeth tooth width 50mm outside diameter 108mm SKU: 23601600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-16-teeth-tooth-width-50mm-outside-diameter-108mm-sku-23601600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 15 teeth tooth width 50mm outside diameter 102mm SKU: 23601500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-15-teeth-tooth-width-50mm-outside-diameter-102mm-sku-23601500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 14 teeth tooth width 50mm outside diameter 96mm SKU: 23601400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-14-teeth-tooth-width-50mm-outside-diameter-96mm-sku-23601400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 13 teeth tooth width 50mm outside diameter 90mm SKU: 23601300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-13-teeth-tooth-width-50mm-outside-diameter-90mm-sku-23601300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 12 teeth tooth width 50mm outside diameter 84mm SKU: 23601200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-12-teeth-tooth-width-50mm-outside-diameter-84mm-sku-23601200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 60 teeth tooth width 50mm outside diameter 310mm SKU: 23511060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-60-teeth-tooth-width-50mm-outside-diameter-310mm-sku-23511060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 50 teeth tooth width 50mm outside diameter 260mm SKU: 23511050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-50-teeth-tooth-width-50mm-outside-diameter-260mm-sku-23511050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 40 teeth tooth width 50mm outside diameter 210mm SKU: 23511040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-40-teeth-tooth-width-50mm-outside-diameter-210mm-sku-23511040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 36 teeth tooth width 50mm outside diameter 190mm SKU: 23511036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-36-teeth-tooth-width-50mm-outside-diameter-190mm-sku-23511036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 32 teeth tooth width 50mm outside diameter 170mm SKU: 23511032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-32-teeth-tooth-width-50mm-outside-diameter-170mm-sku-23511032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 30 teeth tooth width 50mm outside diameter 160mm SKU: 23511030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-30-teeth-tooth-width-50mm-outside-diameter-160mm-sku-23511030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 29 teeth tooth width 50mm outside diameter 155mm SKU: 23511029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-29-teeth-tooth-width-50mm-outside-diameter-155mm-sku-23511029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 28 teeth tooth width 50mm outside diameter 150mm SKU: 23511028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-28-teeth-tooth-width-50mm-outside-diameter-150mm-sku-23511028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 27 teeth tooth width 50mm outside diameter 145mm SKU: 23511027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-27-teeth-tooth-width-50mm-outside-diameter-145mm-sku-23511027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 26 teeth tooth width 50mm outside diameter 140mm SKU: 23511026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-26-teeth-tooth-width-50mm-outside-diameter-140mm-sku-23511026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 25 teeth tooth width 50mm outside diameter 135mm SKU: 23511025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-25-teeth-tooth-width-50mm-outside-diameter-135mm-sku-23511025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 24 teeth tooth width 50mm outside diameter 130mm SKU: 23511024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-24-teeth-tooth-width-50mm-outside-diameter-130mm-sku-23511024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 23 teeth tooth width 50mm outside diameter 125mm SKU: 23511023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-23-teeth-tooth-width-50mm-outside-diameter-125mm-sku-23511023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 22 teeth tooth width 50mm outside diameter 120mm SKU: 23511022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-22-teeth-tooth-width-50mm-outside-diameter-120mm-sku-23511022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 21 teeth tooth width 50mm outside diameter 115mm SKU: 23511021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-21-teeth-tooth-width-50mm-outside-diameter-115mm-sku-23511021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 20 teeth tooth width 50mm outside diameter 110mm SKU: 23511020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-20-teeth-tooth-width-50mm-outside-diameter-110mm-sku-23511020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 19 teeth tooth width 50mm outside diameter 105mm SKU: 23511019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-19-teeth-tooth-width-50mm-outside-diameter-105mm-sku-23511019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 18 teeth tooth width 50mm outside diameter 100mm SKU: 23511018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-18-teeth-tooth-width-50mm-outside-diameter-100mm-sku-23511018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 17 teeth tooth width 50mm outside diameter 95mm SKU: 23511017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-17-teeth-tooth-width-50mm-outside-diameter-95mm-sku-23511017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 16 teeth tooth width 50mm outside diameter 90mm SKU: 23511016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-16-teeth-tooth-width-50mm-outside-diameter-90mm-sku-23511016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 15 teeth tooth width 50mm outside diameter 85mm SKU: 23511015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-15-teeth-tooth-width-50mm-outside-diameter-85mm-sku-23511015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 14 teeth tooth width 50mm outside diameter 80mm SKU: 23511014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-14-teeth-tooth-width-50mm-outside-diameter-80mm-sku-23511014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 13 teeth tooth width 50mm outside diameter 75mm SKU: 23511013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-13-teeth-tooth-width-50mm-outside-diameter-75mm-sku-23511013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 12 teeth tooth width 50mm outside diameter 70mm SKU: 23511012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-12-teeth-tooth-width-50mm-outside-diameter-70mm-sku-23511012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 60 teeth tooth width 40mm outside diameter 310mm SKU: 23506000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-60-teeth-tooth-width-40mm-outside-diameter-310mm-sku-23506000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 56 teeth tooth width 40mm outside diameter 290mm SKU: 23505600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-56-teeth-tooth-width-40mm-outside-diameter-290mm-sku-23505600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 55 teeth tooth width 40mm outside diameter 285mm SKU: 23505500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-55-teeth-tooth-width-40mm-outside-diameter-285mm-sku-23505500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 52 teeth tooth width 40mm outside diameter 270mm SKU: 23505200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-52-teeth-tooth-width-40mm-outside-diameter-270mm-sku-23505200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 50 teeth tooth width 40mm outside diameter 260mm SKU: 23505000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-50-teeth-tooth-width-40mm-outside-diameter-260mm-sku-23505000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 48 teeth tooth width 40mm outside diameter 250mm SKU: 23504800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-48-teeth-tooth-width-40mm-outside-diameter-250mm-sku-23504800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 45 teeth tooth width 40mm outside diameter 235mm SKU: 23504500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-45-teeth-tooth-width-40mm-outside-diameter-235mm-sku-23504500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 40 teeth tooth width 40mm outside diameter 210mm SKU: 23504000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-40-teeth-tooth-width-40mm-outside-diameter-210mm-sku-23504000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 38 teeth tooth width 40mm outside diameter 200mm SKU: 23503800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-38-teeth-tooth-width-40mm-outside-diameter-200mm-sku-23503800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 36 teeth tooth width 40mm outside diameter 190mm SKU: 23503600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-36-teeth-tooth-width-40mm-outside-diameter-190mm-sku-23503600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 35 teeth tooth width 40mm outside diameter 185mm SKU: 23503500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-35-teeth-tooth-width-40mm-outside-diameter-185mm-sku-23503500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 32 teeth tooth width 40mm outside diameter 170mm SKU: 23503200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-32-teeth-tooth-width-40mm-outside-diameter-170mm-sku-23503200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 28 teeth tooth width 40mm outside diameter 150mm SKU: 23502800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-28-teeth-tooth-width-40mm-outside-diameter-150mm-sku-23502800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 27 teeth tooth width 40mm outside diameter 145mm SKU: 23502700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-27-teeth-tooth-width-40mm-outside-diameter-145mm-sku-23502700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 26 teeth tooth width 40mm outside diameter 140mm SKU: 23502600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-26-teeth-tooth-width-40mm-outside-diameter-140mm-sku-23502600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 25 teeth tooth width 40mm outside diameter 135mm SKU: 23502500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-25-teeth-tooth-width-40mm-outside-diameter-135mm-sku-23502500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 24 teeth tooth width 40mm outside diameter 130mm SKU: 23502400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-24-teeth-tooth-width-40mm-outside-diameter-130mm-sku-23502400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 23 teeth tooth width 40mm outside diameter 125mm SKU: 23502300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-23-teeth-tooth-width-40mm-outside-diameter-125mm-sku-23502300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 22 teeth tooth width 40mm outside diameter 120mm SKU: 23502200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-22-teeth-tooth-width-40mm-outside-diameter-120mm-sku-23502200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 21 teeth tooth width 40mm outside diameter 115mm SKU: 23502100](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-21-teeth-tooth-width-40mm-outside-diameter-115mm-sku-23502100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 20 teeth tooth width 40mm outside diameter 110mm SKU: 23502000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-20-teeth-tooth-width-40mm-outside-diameter-110mm-sku-23502000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 19 teeth tooth width 40mm outside diameter 105mm SKU: 23501900](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-19-teeth-tooth-width-40mm-outside-diameter-105mm-sku-23501900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 18 teeth tooth width 40mm outside diameter 100mm SKU: 23501800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-18-teeth-tooth-width-40mm-outside-diameter-100mm-sku-23501800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 17 teeth tooth width 40mm outside diameter 95mm SKU: 23501700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-17-teeth-tooth-width-40mm-outside-diameter-95mm-sku-23501700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 16 teeth tooth width 40mm outside diameter 90mm SKU: 23501600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-16-teeth-tooth-width-40mm-outside-diameter-90mm-sku-23501600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 15 teeth tooth width 40mm outside diameter 85mm SKU: 23501500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-15-teeth-tooth-width-40mm-outside-diameter-85mm-sku-23501500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 14 teeth tooth width 40mm outside diameter 80mm SKU: 23501400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-14-teeth-tooth-width-40mm-outside-diameter-80mm-sku-23501400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 13 teeth tooth width 40mm outside diameter 75mm SKU: 23501300](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-13-teeth-tooth-width-40mm-outside-diameter-75mm-sku-23501300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 12 teeth tooth width 40mm outside diameter 70mm SKU: 23501200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-12-teeth-tooth-width-40mm-outside-diameter-70mm-sku-23501200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 90 teeth tooth width 40mm outside diameter 368mm SKU: 23411090](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-90-teeth-tooth-width-40mm-outside-diameter-368mm-sku-23411090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 23411060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-23411060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23411050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23411050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23411040](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23411040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 38 teeth tooth width 40mm outside diameter 160mm SKU: 23411038](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-38-teeth-tooth-width-40mm-outside-diameter-160mm-sku-23411038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 23411036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-23411036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 35 teeth tooth width 40mm outside diameter 148mm SKU: 23411035](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-35-teeth-tooth-width-40mm-outside-diameter-148mm-sku-23411035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 34 teeth tooth width 40mm outside diameter 144mm SKU: 23411034](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-34-teeth-tooth-width-40mm-outside-diameter-144mm-sku-23411034/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 33 teeth tooth width 40mm outside diameter 140mm SKU: 23411033](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-33-teeth-tooth-width-40mm-outside-diameter-140mm-sku-23411033/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 32 teeth tooth width 40mm outside diameter 136mm SKU: 23411032](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-32-teeth-tooth-width-40mm-outside-diameter-136mm-sku-23411032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 31 teeth tooth width 40mm outside diameter 132mm SKU: 23411031](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-31-teeth-tooth-width-40mm-outside-diameter-132mm-sku-23411031/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23411030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23411030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 29 teeth tooth width 40mm outside diameter 124mm SKU: 23411029](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-29-teeth-tooth-width-40mm-outside-diameter-124mm-sku-23411029/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 28 teeth tooth width 40mm outside diameter 120mm SKU: 23411028](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-28-teeth-tooth-width-40mm-outside-diameter-120mm-sku-23411028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 27 teeth tooth width 40mm outside diameter 116mm SKU: 23411027](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-27-teeth-tooth-width-40mm-outside-diameter-116mm-sku-23411027/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 26 teeth tooth width 40mm outside diameter 112mm SKU: 23411026](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-26-teeth-tooth-width-40mm-outside-diameter-112mm-sku-23411026/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23411025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23411025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23411024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23411024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 23 teeth tooth width 40mm outside diameter 100mm SKU: 23411023](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-23-teeth-tooth-width-40mm-outside-diameter-100mm-sku-23411023/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 22 teeth tooth width 40mm outside diameter 96mm SKU: 23411022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-22-teeth-tooth-width-40mm-outside-diameter-96mm-sku-23411022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 21 teeth tooth width 40mm outside diameter 92mm SKU: 23411021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-21-teeth-tooth-width-40mm-outside-diameter-92mm-sku-23411021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23411020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23411020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 19 teeth tooth width 40mm outside diameter 84mm SKU: 23411019](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-19-teeth-tooth-width-40mm-outside-diameter-84mm-sku-23411019/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 18 teeth tooth width 40mm outside diameter 80mm SKU: 23411018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-18-teeth-tooth-width-40mm-outside-diameter-80mm-sku-23411018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 17 teeth tooth width 40mm outside diameter 76mm SKU: 23411017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-17-teeth-tooth-width-40mm-outside-diameter-76mm-sku-23411017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 16 teeth tooth width 40mm outside diameter 72mm SKU: 23411016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-sku-23411016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23411015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23411015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 14 teeth tooth width 40mm outside diameter 64mm SKU: 23411014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-14-teeth-tooth-width-40mm-outside-diameter-64mm-sku-23411014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 13 teeth tooth width 40mm outside diameter 60mm SKU: 23411013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-13-teeth-tooth-width-40mm-outside-diameter-60mm-sku-23411013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 12 teeth tooth width 40mm outside diameter 56mm SKU: 23411012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-sku-23411012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20^. - [Spur gear made of steel C45 with hub module 4 100 teeth tooth width 30mm outside diameter 408mm SKU: 23410000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-100-teeth-tooth-width-30mm-outside-diameter-408mm-sku-23410000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 96 teeth tooth width 30mm outside diameter 392mm SKU: 23409600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-96-teeth-tooth-width-30mm-outside-diameter-392mm-sku-23409600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 90 teeth tooth width 30mm outside diameter 368mm SKU: 23409000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-90-teeth-tooth-width-30mm-outside-diameter-368mm-sku-23409000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Clamp collar single-split steel C45 zinc-plated bore 14mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62388114K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-14mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62388114k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 14mm with screw DIN 912 12.9 SKU: 62388114](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-14mm-with-screw-din-912-12-9-sku-62388114/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 13mm with screw DIN 912 12.9 SKU: 62388113](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-13mm-with-screw-din-912-12-9-sku-62388113/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 12mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62388112K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-12mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62388112k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 12mm with screw DIN 912 12.9 SKU: 62388112](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-12mm-with-screw-din-912-12-9-sku-62388112/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 11mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62388111K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-11mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62388111k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 11mm with screw DIN 912 12.9 SKU: 62388111](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-11mm-with-screw-din-912-12-9-sku-62388111/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 10mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62388110K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-10mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62388110k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 10mm with screw DIN 912 12.9 SKU: 62388110](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-10mm-with-screw-din-912-12-9-sku-62388110/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 9mm with screw DIN 912 12.9 SKU: 62388109](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-9mm-with-screw-din-912-12-9-sku-62388109/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 8mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62388108K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-8mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62388108k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 8mm with screw DIN 912 12.9 SKU: 62388108](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-8mm-with-screw-din-912-12-9-sku-62388108/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 7mm with screw DIN 912 12.9 SKU: 62388107](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-7mm-with-screw-din-912-12-9-sku-62388107/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 6mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62388106K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-6mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62388106k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 6mm with screw DIN 912 12.9 SKU: 62388106](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-6mm-with-screw-din-912-12-9-sku-62388106/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 5mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62388105K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-5mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62388105k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 5mm with screw DIN 912 12.9 SKU: 62388105](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-5mm-with-screw-din-912-12-9-sku-62388105/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 4mm with screw DIN 912 12.9 SKU: 62388104](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-4mm-with-screw-din-912-12-9-sku-62388104/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 3mm with screw DIN 912 12.9 SKU: 62388103](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-3mm-with-screw-din-912-12-9-sku-62388103/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Shaft collar DIN 705 A bore 100mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623881006](https://maedler.in/product/shaft-collar-din-705-a-bore-100mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623881006/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 90mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880906](https://maedler.in/product/shaft-collar-din-705-a-bore-90mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880906/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 85mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880856](https://maedler.in/product/shaft-collar-din-705-a-bore-85mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880856/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 80mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880806](https://maedler.in/product/shaft-collar-din-705-a-bore-80mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880806/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 75mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880756](https://maedler.in/product/shaft-collar-din-705-a-bore-75mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880756/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 70mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880706](https://maedler.in/product/shaft-collar-din-705-a-bore-70mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880706/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 70mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388070](https://maedler.in/product/shaft-collar-din-705-a-bore-70mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388070/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 65mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880656](https://maedler.in/product/shaft-collar-din-705-a-bore-65mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880656/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 65mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388065](https://maedler.in/product/shaft-collar-din-705-a-bore-65mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388065/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 63mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880636](https://maedler.in/product/shaft-collar-din-705-a-bore-63mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880636/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 63mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388063](https://maedler.in/product/shaft-collar-din-705-a-bore-63mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388063/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 60mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880606](https://maedler.in/product/shaft-collar-din-705-a-bore-60mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880606/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 60mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388060](https://maedler.in/product/shaft-collar-din-705-a-bore-60mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388060/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 56mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880566](https://maedler.in/product/shaft-collar-din-705-a-bore-56mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880566/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 56mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388056](https://maedler.in/product/shaft-collar-din-705-a-bore-56mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388056/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 55mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880556](https://maedler.in/product/shaft-collar-din-705-a-bore-55mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880556/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 55mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388055](https://maedler.in/product/shaft-collar-din-705-a-bore-55mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388055/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 50mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880506](https://maedler.in/product/shaft-collar-din-705-a-bore-50mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880506/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 50mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388050](https://maedler.in/product/shaft-collar-din-705-a-bore-50mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388050/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 48mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880486](https://maedler.in/product/shaft-collar-din-705-a-bore-48mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880486/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 48mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388048](https://maedler.in/product/shaft-collar-din-705-a-bore-48mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388048/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 45mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880456](https://maedler.in/product/shaft-collar-din-705-a-bore-45mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880456/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 45mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388045](https://maedler.in/product/shaft-collar-din-705-a-bore-45mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388045/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 42mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880426](https://maedler.in/product/shaft-collar-din-705-a-bore-42mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880426/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 42mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388042](https://maedler.in/product/shaft-collar-din-705-a-bore-42mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388042/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 40mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880406](https://maedler.in/product/shaft-collar-din-705-a-bore-40mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880406/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 40mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388040](https://maedler.in/product/shaft-collar-din-705-a-bore-40mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388040/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 38mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880386](https://maedler.in/product/shaft-collar-din-705-a-bore-38mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880386/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 38mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388038](https://maedler.in/product/shaft-collar-din-705-a-bore-38mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388038/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 36mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880366](https://maedler.in/product/shaft-collar-din-705-a-bore-36mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880366/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 36mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388036](https://maedler.in/product/shaft-collar-din-705-a-bore-36mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388036/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 35mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880356](https://maedler.in/product/shaft-collar-din-705-a-bore-35mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880356/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 35mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388035](https://maedler.in/product/shaft-collar-din-705-a-bore-35mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388035/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 32mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880326](https://maedler.in/product/shaft-collar-din-705-a-bore-32mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880326/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 32mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388032](https://maedler.in/product/shaft-collar-din-705-a-bore-32mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388032/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 30mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880306](https://maedler.in/product/shaft-collar-din-705-a-bore-30mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880306/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 30mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388030](https://maedler.in/product/shaft-collar-din-705-a-bore-30mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388030/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 28mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880286](https://maedler.in/product/shaft-collar-din-705-a-bore-28mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880286/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 28mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388028](https://maedler.in/product/shaft-collar-din-705-a-bore-28mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388028/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 26mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880266](https://maedler.in/product/shaft-collar-din-705-a-bore-26mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880266/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 26mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388026](https://maedler.in/product/shaft-collar-din-705-a-bore-26mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388026/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 25mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880256](https://maedler.in/product/shaft-collar-din-705-a-bore-25mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880256/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 25mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388025](https://maedler.in/product/shaft-collar-din-705-a-bore-25mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388025/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 24mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880246](https://maedler.in/product/shaft-collar-din-705-a-bore-24mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880246/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 24mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388024](https://maedler.in/product/shaft-collar-din-705-a-bore-24mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388024/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 22mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880226](https://maedler.in/product/shaft-collar-din-705-a-bore-22mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880226/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 22mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388022](https://maedler.in/product/shaft-collar-din-705-a-bore-22mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388022/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 20mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880206](https://maedler.in/product/shaft-collar-din-705-a-bore-20mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880206/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 20mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388020](https://maedler.in/product/shaft-collar-din-705-a-bore-20mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388020/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 18mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880186](https://maedler.in/product/shaft-collar-din-705-a-bore-18mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880186/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 18mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388018](https://maedler.in/product/shaft-collar-din-705-a-bore-18mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388018/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 16mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880166](https://maedler.in/product/shaft-collar-din-705-a-bore-16mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880166/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 16mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388016](https://maedler.in/product/shaft-collar-din-705-a-bore-16mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388016/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 15mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880156](https://maedler.in/product/shaft-collar-din-705-a-bore-15mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880156/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 15mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388015](https://maedler.in/product/shaft-collar-din-705-a-bore-15mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388015/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 14mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880146](https://maedler.in/product/shaft-collar-din-705-a-bore-14mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880146/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 14mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388014](https://maedler.in/product/shaft-collar-din-705-a-bore-14mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388014/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 12mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880126](https://maedler.in/product/shaft-collar-din-705-a-bore-12mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880126/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 12mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388012](https://maedler.in/product/shaft-collar-din-705-a-bore-12mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388012/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 11mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880116](https://maedler.in/product/shaft-collar-din-705-a-bore-11mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880116/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 11mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388011](https://maedler.in/product/shaft-collar-din-705-a-bore-11mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388011/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 10mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880106](https://maedler.in/product/shaft-collar-din-705-a-bore-10mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880106/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 10mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388010](https://maedler.in/product/shaft-collar-din-705-a-bore-10mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388010/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 9mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880096](https://maedler.in/product/shaft-collar-din-705-a-bore-9mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880096/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 9mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388009](https://maedler.in/product/shaft-collar-din-705-a-bore-9mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388009/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 8mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880086](https://maedler.in/product/shaft-collar-din-705-a-bore-8mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880086/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 8mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388008](https://maedler.in/product/shaft-collar-din-705-a-bore-8mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388008/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 7mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880076](https://maedler.in/product/shaft-collar-din-705-a-bore-7mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880076/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 7mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388007](https://maedler.in/product/shaft-collar-din-705-a-bore-7mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388007/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 6mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880066](https://maedler.in/product/shaft-collar-din-705-a-bore-6mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880066/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 6mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388006](https://maedler.in/product/shaft-collar-din-705-a-bore-6mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388006/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 5mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880056](https://maedler.in/product/shaft-collar-din-705-a-bore-5mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880056/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 5mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388005](https://maedler.in/product/shaft-collar-din-705-a-bore-5mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388005/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 4mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880046](https://maedler.in/product/shaft-collar-din-705-a-bore-4mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880046/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 4mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388004](https://maedler.in/product/shaft-collar-din-705-a-bore-4mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388004/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 3mm zinc plated set screw DIN EN ISO 4027 (old DIN 914) SKU: 623880036](https://maedler.in/product/shaft-collar-din-705-a-bore-3mm-zinc-plated-set-screw-din-en-iso-4027-old-din-914-sku-623880036/): Light-duty series. With set screw made from steel zinc-plated with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 3mmm zinc plated set screw DIN EN 27434 (old DIN 553) SKU: 62388003](https://maedler.in/product/shaft-collar-din-705-a-bore-3mmm-zinc-plated-set-screw-din-en-27434-old-din-553-sku-62388003/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel, zinc-plated.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Flanged bush BBP bore 60mm polyamide 6.6 outer diameter 70mm length 60mm flange diameter 80mm SKU: 62387400](https://maedler.in/product/flanged-bush-bbp-bore-60mm-polyamide-6-6-outer-diameter-70mm-length-60mm-flange-diameter-80mm-sku-62387400/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 50mm polyamide 6.6 outer diameter 60mm length 50mm flange diameter 70mm SKU: 62386900](https://maedler.in/product/flanged-bush-bbp-bore-50mm-polyamide-6-6-outer-diameter-60mm-length-50mm-flange-diameter-70mm-sku-62386900/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 50mm polyamide 6.6 outer diameter 56mm length 50mm flange diameter 70mm SKU: 62386800](https://maedler.in/product/flanged-bush-bbp-bore-50mm-polyamide-6-6-outer-diameter-56mm-length-50mm-flange-diameter-70mm-sku-62386800/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Flanged bush BBP bore 40mm polyamide 6.6 outer diameter 50mm length 40mm flange diameter 60mm SKU: 62386400](https://maedler.in/product/flanged-bush-bbp-bore-40mm-polyamide-6-6-outer-diameter-50mm-length-40mm-flange-diameter-60mm-sku-62386400/): Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance. Surface pressure max.: 18 N/mm², dependant on sliding speed and bearing temperature Sliding Speed:2 m/s Lubrication: usually not required Bearing clearance: about 0.01 mm per mm shaft-Ø Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well. Coefficient of linear expansion: 8 x 10^-5 Moisture absorption max.: 7.5% Moisture absorption at 20°C and 50% rel. humidity: 2.4% Mounting hole: tolerance H7 - [Spur gear made of steel C45 without hub module 2 100 teeth tooth width 20mm outside diameter 204mm SKU: 24111100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-100-teeth-tooth-width-20mm-outside-diameter-204mm-sku-24111100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 95 teeth tooth width 20mm outside diameter 194mm SKU: 24111095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-95-teeth-tooth-width-20mm-outside-diameter-194mm-sku-24111095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 90 teeth tooth width 20mm outside diameter 184mm SKU: 24111090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-90-teeth-tooth-width-20mm-outside-diameter-184mm-sku-24111090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 85 teeth tooth width 20mm outside diameter 174mm SKU: 24111085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-85-teeth-tooth-width-20mm-outside-diameter-174mm-sku-24111085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 24111080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-24111080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 76 teeth tooth width 20mm outside diameter 156mm SKU: 24111076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-76-teeth-tooth-width-20mm-outside-diameter-156mm-sku-24111076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 75 teeth tooth width 20mm outside diameter 154mm SKU: 24111075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-75-teeth-tooth-width-20mm-outside-diameter-154mm-sku-24111075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 72 teeth tooth width 20mm outside diameter 148mm SKU: 24111072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-72-teeth-tooth-width-20mm-outside-diameter-148mm-sku-24111072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 24111050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-24111050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 24111048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-24111048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 24111045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-24111045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 24111040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-24111040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 24111036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-24111036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 24111035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-24111035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 24111030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-24111030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 24111025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-24111025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 24111024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-24111024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 24111020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-24111020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 24111018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-24111018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 100 teeth tooth width 16mm outside diameter 204mm SKU: 24110000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-100-teeth-tooth-width-16mm-outside-diameter-204mm-sku-24110000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 96 teeth tooth width 16mm outside diameter 196mm SKU: 24109600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-96-teeth-tooth-width-16mm-outside-diameter-196mm-sku-24109600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 95 teeth tooth width 16mm outside diameter 194mm SKU: 24109500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-95-teeth-tooth-width-16mm-outside-diameter-194mm-sku-24109500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 90 teeth tooth width 16mm outside diameter 184mm SKU: 24109000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-90-teeth-tooth-width-16mm-outside-diameter-184mm-sku-24109000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 85 teeth tooth width 16mm outside diameter 174mm SKU: 24108500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-85-teeth-tooth-width-16mm-outside-diameter-174mm-sku-24108500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 80 teeth tooth width 16mm outside diameter 164mm SKU: 24108000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-80-teeth-tooth-width-16mm-outside-diameter-164mm-sku-24108000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 78 teeth tooth width 16mm outside diameter 160mm SKU: 24107800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-78-teeth-tooth-width-16mm-outside-diameter-160mm-sku-24107800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 76 teeth tooth width 16mm outside diameter 156mm SKU: 24107600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-76-teeth-tooth-width-16mm-outside-diameter-156mm-sku-24107600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 75 teeth tooth width 16mm outside diameter 154mm SKU: 24107500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-75-teeth-tooth-width-16mm-outside-diameter-154mm-sku-24107500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 72 teeth tooth width 16mm outside diameter 148mm SKU: 24107200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-72-teeth-tooth-width-16mm-outside-diameter-148mm-sku-24107200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 70 teeth tooth width 16mm outside diameter 144mm SKU: 24107000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-70-teeth-tooth-width-16mm-outside-diameter-144mm-sku-24107000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 67 teeth tooth width 16mm outside diameter 138mm SKU: 24106700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-67-teeth-tooth-width-16mm-outside-diameter-138mm-sku-24106700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 65 teeth tooth width 16mm outside diameter 134mm SKU: 24106500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-65-teeth-tooth-width-16mm-outside-diameter-134mm-sku-24106500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 64 teeth tooth width 16mm outside diameter 132mm SKU: 24106400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-64-teeth-tooth-width-16mm-outside-diameter-132mm-sku-24106400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 63 teeth tooth width 16mm outside diameter 130mm SKU: 24106300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-63-teeth-tooth-width-16mm-outside-diameter-130mm-sku-24106300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 61 teeth tooth width 16mm outside diameter 126mm SKU: 24106100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-61-teeth-tooth-width-16mm-outside-diameter-126mm-sku-24106100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 60 teeth tooth width 16mm outside diameter 124mm SKU: 24106000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-60-teeth-tooth-width-16mm-outside-diameter-124mm-sku-24106000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 57 teeth tooth width 16mm outside diameter 118mm SKU: 24105700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-57-teeth-tooth-width-16mm-outside-diameter-118mm-sku-24105700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 56 teeth tooth width 16mm outside diameter 116mm SKU: 24105600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-56-teeth-tooth-width-16mm-outside-diameter-116mm-sku-24105600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 55 teeth tooth width 16mm outside diameter 114mm SKU: 24105500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-55-teeth-tooth-width-16mm-outside-diameter-114mm-sku-24105500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 54 teeth tooth width 16mm outside diameter 112mm SKU: 24105400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-54-teeth-tooth-width-16mm-outside-diameter-112mm-sku-24105400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 53 teeth tooth width 16mm outside diameter 110mm SKU: 24105300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-53-teeth-tooth-width-16mm-outside-diameter-110mm-sku-24105300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 52 teeth tooth width 16mm outside diameter 108mm SKU: 24105200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-52-teeth-tooth-width-16mm-outside-diameter-108mm-sku-24105200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 51 teeth tooth width 16mm outside diameter 106mm SKU: 24105100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-51-teeth-tooth-width-16mm-outside-diameter-106mm-sku-24105100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 50 teeth tooth width 16mm outside diameter 104mm SKU: 24105000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-50-teeth-tooth-width-16mm-outside-diameter-104mm-sku-24105000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 49 teeth tooth width 16mm outside diameter 102mm SKU: 24104900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-49-teeth-tooth-width-16mm-outside-diameter-102mm-sku-24104900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 48 teeth tooth width 16mm outside diameter 100mm SKU: 24104800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-48-teeth-tooth-width-16mm-outside-diameter-100mm-sku-24104800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 47 teeth tooth width 16mm outside diameter 98mm SKU: 24104700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-47-teeth-tooth-width-16mm-outside-diameter-98mm-sku-24104700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 45 teeth tooth width 16mm outside diameter 94mm SKU: 24104500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-45-teeth-tooth-width-16mm-outside-diameter-94mm-sku-24104500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 43 teeth tooth width 16mm outside diameter 90mm SKU: 24104300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-43-teeth-tooth-width-16mm-outside-diameter-90mm-sku-24104300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 42 teeth tooth width 16mm outside diameter 88mm SKU: 24104200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-42-teeth-tooth-width-16mm-outside-diameter-88mm-sku-24104200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 41 teeth tooth width 16mm outside diameter 86mm SKU: 24104100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-41-teeth-tooth-width-16mm-outside-diameter-86mm-sku-24104100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 40 teeth tooth width 16mm outside diameter 84mm SKU: 24104000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-40-teeth-tooth-width-16mm-outside-diameter-84mm-sku-24104000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 39 teeth tooth width 16mm outside diameter 82mm SKU: 24103900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-39-teeth-tooth-width-16mm-outside-diameter-82mm-sku-24103900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 38 teeth tooth width 16mm outside diameter 80mm SKU: 24103800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-38-teeth-tooth-width-16mm-outside-diameter-80mm-sku-24103800-2/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 38 teeth tooth width 16mm outside diameter 80mm SKU: 24103800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-38-teeth-tooth-width-16mm-outside-diameter-80mm-sku-24103800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 37 teeth tooth width 16mm outside diameter 78mm SKU: 24103700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-37-teeth-tooth-width-16mm-outside-diameter-78mm-sku-24103700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 36 teeth tooth width 16mm outside diameter 76mm SKU: 24103600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-36-teeth-tooth-width-16mm-outside-diameter-76mm-sku-24103600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 35 teeth tooth width 16mm outside diameter 74mm SKU: 24103500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-35-teeth-tooth-width-16mm-outside-diameter-74mm-sku-24103500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 32 teeth tooth width 16mm outside diameter 68mm SKU: 24103200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-32-teeth-tooth-width-16mm-outside-diameter-68mm-sku-24103200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 30 teeth tooth width 16mm outside diameter 64mm SKU: 24103000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-30-teeth-tooth-width-16mm-outside-diameter-64mm-sku-24103000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 28 teeth tooth width 16mm outside diameter 60mm SKU: 24102800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-28-teeth-tooth-width-16mm-outside-diameter-60mm-sku-24102800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 27 teeth tooth width 16mm outside diameter 58mm SKU: 24102700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-27-teeth-tooth-width-16mm-outside-diameter-58mm-sku-24102700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 26 teeth tooth width 16mm outside diameter 56mm SKU: 24102600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-26-teeth-tooth-width-16mm-outside-diameter-56mm-sku-24102600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 25 teeth tooth width 16mm outside diameter 54mm SKU: 24102500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-25-teeth-tooth-width-16mm-outside-diameter-54mm-sku-24102500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 24 teeth tooth width 16mm outside diameter 52mm SKU: 24102400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-24-teeth-tooth-width-16mm-outside-diameter-52mm-sku-24102400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 23 teeth tooth width 16mm outside diameter 50mm SKU: 24102300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-23-teeth-tooth-width-16mm-outside-diameter-50mm-sku-24102300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 22 teeth tooth width 16mm outside diameter 48mm SKU: 24102200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-22-teeth-tooth-width-16mm-outside-diameter-48mm-sku-24102200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 21 teeth tooth width 16mm outside diameter 46mm SKU: 24102100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-21-teeth-tooth-width-16mm-outside-diameter-46mm-sku-24102100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 20 teeth tooth width 16mm outside diameter 44mm SKU: 24102000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-20-teeth-tooth-width-16mm-outside-diameter-44mm-sku-24102000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 18 teeth tooth width 16mm outside diameter 40mm SKU: 24101800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-18-teeth-tooth-width-16mm-outside-diameter-40mm-sku-24101800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 60 teeth tooth width 60mm outside diameter 372mm SKU: 23611060](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-60-teeth-tooth-width-60mm-outside-diameter-372mm-sku-23611060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 50 teeth tooth width 60mm outside diameter 312mm SKU: 23611050](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-50-teeth-tooth-width-60mm-outside-diameter-312mm-sku-23611050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 36 teeth tooth width 60mm outside diameter 228mm SKU: 23611036](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-36-teeth-tooth-width-60mm-outside-diameter-228mm-sku-23611036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 30 teeth tooth width 60mm outside diameter 192mm SKU: 23611030](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-30-teeth-tooth-width-60mm-outside-diameter-192mm-sku-23611030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 25 teeth tooth width 60mm outside diameter 162mm SKU: 23611025](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-25-teeth-tooth-width-60mm-outside-diameter-162mm-sku-23611025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 24 teeth tooth width 60mm outside diameter 156mm SKU: 23611024](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-24-teeth-tooth-width-60mm-outside-diameter-156mm-sku-23611024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 22 teeth tooth width 60mm outside diameter 144mm SKU: 23611022](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-22-teeth-tooth-width-60mm-outside-diameter-144mm-sku-23611022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 21 teeth tooth width 60mm outside diameter 138mm SKU: 23611021](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-21-teeth-tooth-width-60mm-outside-diameter-138mm-sku-23611021/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 20 teeth tooth width 60mm outside diameter 132mm SKU: 23611020](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-20-teeth-tooth-width-60mm-outside-diameter-132mm-sku-23611020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 18 teeth tooth width 60mm outside diameter 120mm SKU: 23611018](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-18-teeth-tooth-width-60mm-outside-diameter-120mm-sku-23611018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 17 teeth tooth width 60mm outside diameter 114mm SKU: 23611017](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-17-teeth-tooth-width-60mm-outside-diameter-114mm-sku-23611017/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 16 teeth tooth width 60mm outside diameter 108mm SKU: 23611016](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-16-teeth-tooth-width-60mm-outside-diameter-108mm-sku-23611016/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 15 teeth tooth width 60mm outside diameter 102mm SKU: 23611015](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-15-teeth-tooth-width-60mm-outside-diameter-102mm-sku-23611015/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 14 teeth tooth width 60mm outside diameter 96mm SKU: 23611014](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-14-teeth-tooth-width-60mm-outside-diameter-96mm-sku-23611014/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 13 teeth tooth width 60mm outside diameter 90mm SKU: 23611013](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-13-teeth-tooth-width-60mm-outside-diameter-90mm-sku-23611013/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 12 teeth tooth width 60mm outside diameter 84mm SKU: 23611012](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-12-teeth-tooth-width-60mm-outside-diameter-84mm-sku-23611012/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 60 teeth tooth width 50mm outside diameter 372mm SKU: 23606000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-60-teeth-tooth-width-50mm-outside-diameter-372mm-sku-23606000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 55 teeth tooth width 50mm outside diameter 342mm SKU: 23605500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-55-teeth-tooth-width-50mm-outside-diameter-342mm-sku-23605500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 50 teeth tooth width 50mm outside diameter 312mm SKU: 23605000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-50-teeth-tooth-width-50mm-outside-diameter-312mm-sku-23605000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 48 teeth tooth width 50mm outside diameter 300mm SKU: 23604800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-48-teeth-tooth-width-50mm-outside-diameter-300mm-sku-23604800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 45 teeth tooth width 50mm outside diameter 282mm SKU: 23604500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-45-teeth-tooth-width-50mm-outside-diameter-282mm-sku-23604500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 40 teeth tooth width 50mm outside diameter 252mm SKU: 23604000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-40-teeth-tooth-width-50mm-outside-diameter-252mm-sku-23604000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 38 teeth tooth width 50mm outside diameter 240mm SKU: 23603800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-38-teeth-tooth-width-50mm-outside-diameter-240mm-sku-23603800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 36 teeth tooth width 50mm outside diameter 228mm SKU: 23603600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-36-teeth-tooth-width-50mm-outside-diameter-228mm-sku-23603600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 35 teeth tooth width 50mm outside diameter 222mm SKU: 23603500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-35-teeth-tooth-width-50mm-outside-diameter-222mm-sku-23603500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 32 teeth tooth width 50mm outside diameter 204mm SKU: 23603200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-32-teeth-tooth-width-50mm-outside-diameter-204mm-sku-23603200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 30 teeth tooth width 50mm outside diameter 192mm SKU: 23603000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-30-teeth-tooth-width-50mm-outside-diameter-192mm-sku-23603000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 28 teeth tooth width 50mm outside diameter 180mm SKU: 23602800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-28-teeth-tooth-width-50mm-outside-diameter-180mm-sku-23602800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 27 teeth tooth width 50mm outside diameter 174mm SKU: 23602700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-27-teeth-tooth-width-50mm-outside-diameter-174mm-sku-23602700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 26 teeth tooth width 50mm outside diameter 168mm SKU: 23602600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-26-teeth-tooth-width-50mm-outside-diameter-168mm-sku-23602600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Clamp collar double-split steel C45 zinc-plated bore 45mm with screws DIN 912 12.9 SKU: 62388445](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-45mm-with-screws-din-912-12-9-sku-62388445/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 42mm with screws DIN 912 12.9 SKU: 62388442](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-42mm-with-screws-din-912-12-9-sku-62388442/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 40mm with screws DIN 912 12.9 SKU: 62388440](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-40mm-with-screws-din-912-12-9-sku-62388440/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 38mm with screws DIN 912 12.9 SKU: 62388438](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-38mm-with-screws-din-912-12-9-sku-62388438/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 36mm with screws DIN 912 12.9 SKU: 62388436](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-36mm-with-screws-din-912-12-9-sku-62388436/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 35mm with screws DIN 912 12.9 SKU: 62388435](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-35mm-with-screws-din-912-12-9-sku-62388435/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 34mm with screws DIN 912 12.9 SKU: 62388434](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-34mm-with-screws-din-912-12-9-sku-62388434/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 32mm with screws DIN 912 12.9 SKU: 62388432](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-32mm-with-screws-din-912-12-9-sku-62388432/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 30mm with screws DIN 912 12.9 SKU: 62388430](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-30mm-with-screws-din-912-12-9-sku-62388430/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 28mm with screws DIN 912 12.9 SKU: 62388428](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-28mm-with-screws-din-912-12-9-sku-62388428/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 26mm with screws DIN 912 12.9 SKU: 62388426](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-26mm-with-screws-din-912-12-9-sku-62388426/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 25mm with screws DIN 912 12.9 SKU: 62388425](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-25mm-with-screws-din-912-12-9-sku-62388425/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 24mm with screws DIN 912 12.9 SKU: 62388424](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-24mm-with-screws-din-912-12-9-sku-62388424/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 23mm with screws DIN 912 12.9 SKU: 62388423](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-23mm-with-screws-din-912-12-9-sku-62388423/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 22mm with screws DIN 912 12.9 SKU: 62388422](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-22mm-with-screws-din-912-12-9-sku-62388422/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 21mm with screws DIN 912 12.9 SKU: 62388421](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-21mm-with-screws-din-912-12-9-sku-62388421/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 20mm with screws DIN 912 12.9 SKU: 62388420](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-20mm-with-screws-din-912-12-9-sku-62388420/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 19mm with screws DIN 912 12.9 SKU: 62388419](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-19mm-with-screws-din-912-12-9-sku-62388419/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 18mm with screws DIN 912 12.9 SKU: 62388418](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-18mm-with-screws-din-912-12-9-sku-62388418/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 17mm with screws DIN 912 12.9 SKU: 62388417](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-17mm-with-screws-din-912-12-9-sku-62388417/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 16mm with screws DIN 912 12.9 SKU: 62388416](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-16mm-with-screws-din-912-12-9-sku-62388416/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 15mm with screws DIN 912 12.9 SKU: 62388415](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-15mm-with-screws-din-912-12-9-sku-62388415/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 14mm with screws DIN 912 12.9 SKU: 62388414](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-14mm-with-screws-din-912-12-9-sku-62388414/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 13mm with screws DIN 912 12.9 SKU: 62388413](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-13mm-with-screws-din-912-12-9-sku-62388413/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 12mm with screws DIN 912 12.9 SKU: 62388412](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-12mm-with-screws-din-912-12-9-sku-62388412/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 11mm with screws DIN 912 12.9 SKU: 62388411](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-11mm-with-screws-din-912-12-9-sku-62388411/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 10mm with screws DIN 912 12.9 SKU: 62388410](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-10mm-with-screws-din-912-12-9-sku-62388410/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 9mm with screws DIN 912 12.9 SKU: 62388409](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-9mm-with-screws-din-912-12-9-sku-62388409/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 8mm with screws DIN 912 12.9 SKU: 62388408](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-8mm-with-screws-din-912-12-9-sku-62388408/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 7mm with screws DIN 912 12.9 SKU: 62388407](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-7mm-with-screws-din-912-12-9-sku-62388407/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 6mm with screws DIN 912 12.9 SKU: 62388406](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-6mm-with-screws-din-912-12-9-sku-62388406/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 5mm with screws DIN 912 12.9 SKU: 62388405](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-5mm-with-screws-din-912-12-9-sku-62388405/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 4mm with screws DIN 912 12.9 SKU: 62388404](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-4mm-with-screws-din-912-12-9-sku-62388404/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 3mm with screws DIN 912 12.9 SKU: 62388403](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-3mm-with-screws-din-912-12-9-sku-62388403/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Shaft collar DIN703 bore 90mm zinc plated set screw 12.9 inner hexagon SKU: 62388290](https://maedler.in/product/shaft-collar-din703-bore-90mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388290/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 85mm zinc plated set screw 12.9 inner hexagon SKU: 62388285](https://maedler.in/product/shaft-collar-din703-bore-85mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388285/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 80mm zinc plated set screw 12.9 inner hexagon SKU: 62388280](https://maedler.in/product/shaft-collar-din703-bore-80mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388280/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 75mm zinc plated set screw 12.9 inner hexagon SKU: 62388275](https://maedler.in/product/shaft-collar-din703-bore-75mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388275/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 70mm zinc plated set screw 12.9 inner hexagon SKU: 62388270](https://maedler.in/product/shaft-collar-din703-bore-70mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388270/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 65mm zinc plated set screw 12.9 inner hexagon SKU: 62388265](https://maedler.in/product/shaft-collar-din703-bore-65mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388265/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 60mm zinc plated set screw 12.9 inner hexagon SKU: 62388260](https://maedler.in/product/shaft-collar-din703-bore-60mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388260/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 55mm zinc plated set screw 12.9 inner hexagon SKU: 62388255](https://maedler.in/product/shaft-collar-din703-bore-55mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388255/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 50mm zinc plated set screw 12.9 inner hexagon SKU: 62388250](https://maedler.in/product/shaft-collar-din703-bore-50mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388250/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 45mm zinc plated set screw 12.9 inner hexagon SKU: 62388245](https://maedler.in/product/shaft-collar-din703-bore-45mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388245/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 40mm zinc plated set screw 12.9 inner hexagon SKU: 62388240](https://maedler.in/product/shaft-collar-din703-bore-40mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388240/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 35mm zinc plated set screw 12.9 inner hexagon SKU: 62388235](https://maedler.in/product/shaft-collar-din703-bore-35mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388235/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 30mm zinc plated set screw 12.9 inner hexagon SKU: 62388230](https://maedler.in/product/shaft-collar-din703-bore-30mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388230/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 25mm zinc plated set screw 12.9 inner hexagon SKU: 62388225](https://maedler.in/product/shaft-collar-din703-bore-25mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388225/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 20mm zinc plated set screw 12.9 inner hexagon SKU: 62388220](https://maedler.in/product/shaft-collar-din703-bore-20mm-zinc-plated-set-screw-12-9-inner-hexagon-sku-62388220/): Material: Steel, zinc-plated.Heavy-duty series. With allen set screw made from steel, zinc-plated, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.#Other sizes and inch-sizes on request. - [Clamp collar single-split steel C45 zinc plated bore 100mm with screw DIN 912 12.9 SKU: 62388200](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-100mm-with-screw-din-912-12-9-sku-62388200/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc plated bore 90mm with screw DIN 912 12.9 SKU: 62388190](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-90mm-with-screw-din-912-12-9-sku-62388190/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc plated bore 80mm with screw DIN 912 12.9 SKU: 62388180](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-80mm-with-screw-din-912-12-9-sku-62388180/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc plated bore 75mm with screw DIN 912 12.9 SKU: 62388175](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-75mm-with-screw-din-912-12-9-sku-62388175/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc plated bore 70mm with screw DIN 912 12.9 SKU: 62388170](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-70mm-with-screw-din-912-12-9-sku-62388170/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc plated bore 65mm with screw DIN 912 12.9 SKU: 62388165](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-65mm-with-screw-din-912-12-9-sku-62388165/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 60mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62388160K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-60mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62388160k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 60mm with screw DIN 912 12.9 SKU: 62388160](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-60mm-with-screw-din-912-12-9-sku-62388160/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 55mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62388155K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-55mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62388155k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 55mm with screw DIN 912 12.9 SKU: 62388155](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-55mm-with-screw-din-912-12-9-sku-62388155/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 50mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62388150K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-50mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62388150k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 50mm with screw DIN 912 12.9 SKU: 62388150](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-50mm-with-screw-din-912-12-9-sku-62388150/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 48mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62388148K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-48mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62388148k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 48mm with screw DIN 912 12.9 SKU: 62388148](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-48mm-with-screw-din-912-12-9-sku-62388148/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 45mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62388145K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-45mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62388145k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 45mm with screw DIN 912 12.9 SKU: 62388145](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-45mm-with-screw-din-912-12-9-sku-62388145/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 42mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62388142K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-42mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62388142k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 42mm with screw DIN 912 12.9 SKU: 62388142](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-42mm-with-screw-din-912-12-9-sku-62388142/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 40mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62388140K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-40mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62388140k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 40mm with screw DIN 912 12.9 SKU: 62388140](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-40mm-with-screw-din-912-12-9-sku-62388140/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 38mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62388138K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-38mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62388138k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 38mm with screw DIN 912 12.9 SKU: 62388138](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-38mm-with-screw-din-912-12-9-sku-62388138/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 36mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62388136K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-36mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62388136k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 36mm with screw DIN 912 12.9 SKU: 62388136](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-36mm-with-screw-din-912-12-9-sku-62388136/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 35mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62388135K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-35mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62388135k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 35mm with screw DIN 912 12.9 SKU: 62388135](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-35mm-with-screw-din-912-12-9-sku-62388135/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc plated bore 34mm with screw DIN 912 12.9 SKU: 62388134](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-34mm-with-screw-din-912-12-9-sku-62388134/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 32mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62388132K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-32mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62388132k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 32mm with screw DIN 912 12.9 SKU: 62388132](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-32mm-with-screw-din-912-12-9-sku-62388132/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 30mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62388130K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-30mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62388130k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc plated bore 30mm with screw DIN 912 12.9 SKU: 62388130](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-30mm-with-screw-din-912-12-9-sku-62388130/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 28mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62388128K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-28mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62388128k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 28mm with screw DIN 912 12.9 SKU: 62388128](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-28mm-with-screw-din-912-12-9-sku-62388128/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 26mm with screw DIN 912 12.9 SKU: 62388126](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-26mm-with-screw-din-912-12-9-sku-62388126/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 25mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62388125K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-25mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62388125k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 25mm with screw DIN 912 12.9 SKU: 62388125](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-25mm-with-screw-din-912-12-9-sku-62388125/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 24mm with screw DIN 912 12.9 SKU: 62388124](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-24mm-with-screw-din-912-12-9-sku-62388124/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 23mm with screw DIN 912 12.9 SKU: 62388123](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-23mm-with-screw-din-912-12-9-sku-62388123/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 22mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62388122K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-22mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62388122k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 22mm with screw DIN 912 12.9 SKU: 62388122](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-22mm-with-screw-din-912-12-9-sku-62388122/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 21mm with screw DIN 912 12.9 SKU: 62388121](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-21mm-with-screw-din-912-12-9-sku-62388121/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 20mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62388120K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-20mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62388120k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 20mm with screw DIN 912 12.9 SKU: 62388120](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-20mm-with-screw-din-912-12-9-sku-62388120/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 19mm with screw DIN 912 12.9 SKU: 62388119](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-19mm-with-screw-din-912-12-9-sku-62388119/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 18mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62388118K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-18mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62388118k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 18mm with screw DIN 912 12.9 SKU: 62388118](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-18mm-with-screw-din-912-12-9-sku-62388118/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 17mm with screw DIN 912 12.9 SKU: 62388117](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-17mm-with-screw-din-912-12-9-sku-62388117/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 16mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62388116K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-16mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62388116k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 16mm with screw DIN 912 12.9 SKU: 62388116](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-16mm-with-screw-din-912-12-9-sku-62388116/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split steel C45 zinc-plated bore 15mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62388115K](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-15mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62388115k/): Material: Steel C45, zinc-plated. Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split steel C45 zinc-plated bore 15mm with screw DIN 912 12.9 SKU: 62388115](https://maedler.in/product/clamp-collar-single-split-steel-c45-zinc-plated-bore-15mm-with-screw-din-912-12-9-sku-62388115/): Material: Steel C45 zinc-plated. Screw steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Spur gear made of steel C45 without hub module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 24311018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-24311018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 100 teeth tooth width 25mm outside diameter 306mm SKU: 24310000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-100-teeth-tooth-width-25mm-outside-diameter-306mm-sku-24310000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 96 teeth tooth width 25mm outside diameter 294mm SKU: 24309600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-96-teeth-tooth-width-25mm-outside-diameter-294mm-sku-24309600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 90 teeth tooth width 25mm outside diameter 276mm SKU: 24309000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-90-teeth-tooth-width-25mm-outside-diameter-276mm-sku-24309000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 80 teeth tooth width 25mm outside diameter 246mm SKU: 24308000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-80-teeth-tooth-width-25mm-outside-diameter-246mm-sku-24308000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 76 teeth tooth width 25mm outside diameter 234mm SKU: 24307600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-76-teeth-tooth-width-25mm-outside-diameter-234mm-sku-24307600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 72 teeth tooth width 25mm outside diameter 222mm SKU: 24307200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-72-teeth-tooth-width-25mm-outside-diameter-222mm-sku-24307200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 70 teeth tooth width 25mm outside diameter 216mm SKU: 24307000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-70-teeth-tooth-width-25mm-outside-diameter-216mm-sku-24307000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 67 teeth tooth width 25mm outside diameter 207mm SKU: 24306700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-67-teeth-tooth-width-25mm-outside-diameter-207mm-sku-24306700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 65 teeth tooth width 25mm outside diameter 201mm SKU: 24306500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-65-teeth-tooth-width-25mm-outside-diameter-201mm-sku-24306500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 60 teeth tooth width 25mm outside diameter 186mm SKU: 24306000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-60-teeth-tooth-width-25mm-outside-diameter-186mm-sku-24306000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 58 teeth tooth width 25mm outside diameter 180mm SKU: 24305800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-58-teeth-tooth-width-25mm-outside-diameter-180mm-sku-24305800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 56 teeth tooth width 25mm outside diameter 174mm SKU: 24305600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-56-teeth-tooth-width-25mm-outside-diameter-174mm-sku-24305600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 53 teeth tooth width 25mm outside diameter 165mm SKU: 24305300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-53-teeth-tooth-width-25mm-outside-diameter-165mm-sku-24305300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 52 teeth tooth width 25mm outside diameter 162mm SKU: 24305200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-52-teeth-tooth-width-25mm-outside-diameter-162mm-sku-24305200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 50 teeth tooth width 25mm outside diameter 156mm SKU: 24305000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-50-teeth-tooth-width-25mm-outside-diameter-156mm-sku-24305000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 48 teeth tooth width 25mm outside diameter 150mm SKU: 24304800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-48-teeth-tooth-width-25mm-outside-diameter-150mm-sku-24304800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 47 teeth tooth width 25mm outside diameter 147mm SKU: 24304700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-47-teeth-tooth-width-25mm-outside-diameter-147mm-sku-24304700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 46 teeth tooth width 25mm outside diameter 144mm SKU: 24304600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-46-teeth-tooth-width-25mm-outside-diameter-144mm-sku-24304600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 45 teeth tooth width 25mm outside diameter 141mm SKU: 24304500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-45-teeth-tooth-width-25mm-outside-diameter-141mm-sku-24304500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 42 teeth tooth width 25mm outside diameter 132mm SKU: 24304200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-42-teeth-tooth-width-25mm-outside-diameter-132mm-sku-24304200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 40 teeth tooth width 25mm outside diameter 126mm SKU: 24304000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-40-teeth-tooth-width-25mm-outside-diameter-126mm-sku-24304000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 38 teeth tooth width 25mm outside diameter 120mm SKU: 24303800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-38-teeth-tooth-width-25mm-outside-diameter-120mm-sku-24303800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 37 teeth tooth width 25mm outside diameter 117mm SKU: 24303700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-37-teeth-tooth-width-25mm-outside-diameter-117mm-sku-24303700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 35 teeth tooth width 25mm outside diameter 111mm SKU: 24303500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-35-teeth-tooth-width-25mm-outside-diameter-111mm-sku-24303500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 30 teeth tooth width 25mm outside diameter 96mm SKU: 24303000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-30-teeth-tooth-width-25mm-outside-diameter-96mm-sku-24303000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 28 teeth tooth width 25mm outside diameter 90mm SKU: 24302800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-28-teeth-tooth-width-25mm-outside-diameter-90mm-sku-24302800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 25 teeth tooth width 25mm outside diameter 81mm SKU: 24302500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-25-teeth-tooth-width-25mm-outside-diameter-81mm-sku-24302500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 24 teeth tooth width 25mm outside diameter 78mm SKU: 24302400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-24-teeth-tooth-width-25mm-outside-diameter-78mm-sku-24302400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 21 teeth tooth width 25mm outside diameter 69mm SKU: 24302100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-21-teeth-tooth-width-25mm-outside-diameter-69mm-sku-24302100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 20 teeth tooth width 25mm outside diameter 66mm SKU: 24302000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-20-teeth-tooth-width-25mm-outside-diameter-66mm-sku-24302000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 18 teeth tooth width 25mm outside diameter 60mm SKU: 24301800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-18-teeth-tooth-width-25mm-outside-diameter-60mm-sku-24301800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 120 teeth tooth width 20mm outside diameter 305mm SKU: 24212000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-120-teeth-tooth-width-20mm-outside-diameter-305mm-sku-24212000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 114 teeth tooth width 20mm outside diameter 290mm SKU: 24211400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-114-teeth-tooth-width-20mm-outside-diameter-290mm-sku-24211400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 127 teeth tooth width 25mm outside diameter 322.5mm SKU: 24211127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-127-teeth-tooth-width-25mm-outside-diameter-322-5mm-sku-24211127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 120 teeth tooth width 25mm outside diameter 305mm SKU: 24211120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-120-teeth-tooth-width-25mm-outside-diameter-305mm-sku-24211120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 114 teeth tooth width 25mm outside diameter 290mm SKU: 24211114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-114-teeth-tooth-width-25mm-outside-diameter-290mm-sku-24211114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 110 teeth tooth width 25mm outside diameter 280mm SKU: 24211110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-110-teeth-tooth-width-25mm-outside-diameter-280mm-sku-24211110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 100 teeth tooth width 25mm outside diameter 255mm SKU: 24211100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-100-teeth-tooth-width-25mm-outside-diameter-255mm-sku-24211100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 95 teeth tooth width 25mm outside diameter 242.5mm SKU: 24211095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-95-teeth-tooth-width-25mm-outside-diameter-242-5mm-sku-24211095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 90 teeth tooth width 25mm outside diameter 230mm SKU: 24211090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-90-teeth-tooth-width-25mm-outside-diameter-230mm-sku-24211090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 85 teeth tooth width 25mm outside diameter 217.5mm SKU: 24211085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-85-teeth-tooth-width-25mm-outside-diameter-217-5mm-sku-24211085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 80 teeth tooth width 25mm outside diameter 205mm SKU: 24211080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-80-teeth-tooth-width-25mm-outside-diameter-205mm-sku-24211080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 76 teeth tooth width 25mm outside diameter 195mm SKU: 24211076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-76-teeth-tooth-width-25mm-outside-diameter-195mm-sku-24211076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 75 teeth tooth width 25mm outside diameter 192.5mm SKU: 24211075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-75-teeth-tooth-width-25mm-outside-diameter-192-5mm-sku-24211075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 72 teeth tooth width 25mm outside diameter 185mm SKU: 24211072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-72-teeth-tooth-width-25mm-outside-diameter-185mm-sku-24211072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 70 teeth tooth width 25mm outside diameter 180mm SKU: 24211070](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-70-teeth-tooth-width-25mm-outside-diameter-180mm-sku-24211070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 65 teeth tooth width 25mm outside diameter 167.5mm SKU: 24211065](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-65-teeth-tooth-width-25mm-outside-diameter-167-5mm-sku-24211065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 24211060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-24211060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 24211050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-24211050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 24211048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-24211048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 24211040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-24211040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 24211030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-24211030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 25 teeth tooth width 25mm outside diameter 67,5mm SKU: 24211025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-675mm-sku-24211025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 24211024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-24211024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 22 teeth tooth width 25mm outside diameter 60mm SKU: 24211022](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-22-teeth-tooth-width-25mm-outside-diameter-60mm-sku-24211022/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 24211020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-24211020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 24211018](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-24211018/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 100 teeth tooth width 20mm outside diameter 255mm SKU: 24210000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-100-teeth-tooth-width-20mm-outside-diameter-255mm-sku-24210000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 90 teeth tooth width 20mm outside diameter 230mm SKU: 24209000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-90-teeth-tooth-width-20mm-outside-diameter-230mm-sku-24209000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 80 teeth tooth width 20mm outside diameter 205mm SKU: 24208000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-80-teeth-tooth-width-20mm-outside-diameter-205mm-sku-24208000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 76 teeth tooth width 20mm outside diameter 195mm SKU: 24207600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-76-teeth-tooth-width-20mm-outside-diameter-195mm-sku-24207600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 70 teeth tooth width 20mm outside diameter 180mm SKU: 24207000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-70-teeth-tooth-width-20mm-outside-diameter-180mm-sku-24207000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 60 teeth tooth width 20mm outside diameter 155mm SKU: 24206000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-60-teeth-tooth-width-20mm-outside-diameter-155mm-sku-24206000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 57 teeth tooth width 20mm outside diameter 147.5mm SKU: 24205700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-57-teeth-tooth-width-20mm-outside-diameter-147-5mm-sku-24205700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 56 teeth tooth width 20mm outside diameter 145mm SKU: 24205600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-56-teeth-tooth-width-20mm-outside-diameter-145mm-sku-24205600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 54 teeth tooth width 20mm outside diameter 140mm SKU: 24205400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-54-teeth-tooth-width-20mm-outside-diameter-140mm-sku-24205400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 53 teeth tooth width 20mm outside diameter 137.5mm SKU: 24205300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-53-teeth-tooth-width-20mm-outside-diameter-137-5mm-sku-24205300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 51 teeth tooth width 20mm outside diameter 132.5mm SKU: 24205100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-51-teeth-tooth-width-20mm-outside-diameter-132-5mm-sku-24205100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 50 teeth tooth width 20mm outside diameter 130mm SKU: 24205000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-50-teeth-tooth-width-20mm-outside-diameter-130mm-sku-24205000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 49 teeth tooth width 20mm outside diameter 127.5mm SKU: 24204900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-49-teeth-tooth-width-20mm-outside-diameter-127-5mm-sku-24204900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 48 teeth tooth width 20mm outside diameter 125mm SKU: 24204800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-48-teeth-tooth-width-20mm-outside-diameter-125mm-sku-24204800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 47 teeth tooth width 20mm outside diameter 122.5mm SKU: 24204700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-47-teeth-tooth-width-20mm-outside-diameter-122-5mm-sku-24204700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 45 teeth tooth width 20mm outside diameter 117.5mm SKU: 24204500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-45-teeth-tooth-width-20mm-outside-diameter-117-5mm-sku-24204500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 44 teeth tooth width 20mm outside diameter 115mm SKU: 24204400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-44-teeth-tooth-width-20mm-outside-diameter-115mm-sku-24204400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 43 teeth tooth width 20mm outside diameter 112.5mm SKU: 24204300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-43-teeth-tooth-width-20mm-outside-diameter-112-5mm-sku-24204300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 41 teeth tooth width 20mm outside diameter 107.5mm SKU: 24204100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-41-teeth-tooth-width-20mm-outside-diameter-107-5mm-sku-24204100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 40 teeth tooth width 20mm outside diameter 105mm SKU: 24204000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-40-teeth-tooth-width-20mm-outside-diameter-105mm-sku-24204000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 39 teeth tooth width 20mm outside diameter 102.5mm SKU: 24203900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-39-teeth-tooth-width-20mm-outside-diameter-102-5mm-sku-24203900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 38 teeth tooth width 20mm outside diameter 100mm SKU: 24203800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-38-teeth-tooth-width-20mm-outside-diameter-100mm-sku-24203800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 37 teeth tooth width 20mm outside diameter 97.5mm SKU: 24203700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-37-teeth-tooth-width-20mm-outside-diameter-97-5mm-sku-24203700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 35 teeth tooth width 20mm outside diameter 92.5mm SKU: 24203500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-35-teeth-tooth-width-20mm-outside-diameter-92-5mm-sku-24203500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 34 teeth tooth width 20mm outside diameter 90mm SKU: 24203400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-34-teeth-tooth-width-20mm-outside-diameter-90mm-sku-24203400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 33 teeth tooth width 20mm outside diameter 87.5mm SKU: 24203300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-33-teeth-tooth-width-20mm-outside-diameter-87-5mm-sku-24203300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 31 teeth tooth width 20mm outside diameter 82.5mm SKU: 24203100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-31-teeth-tooth-width-20mm-outside-diameter-82-5mm-sku-24203100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 30 teeth tooth width 20mm outside diameter 80mm SKU: 24203000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-30-teeth-tooth-width-20mm-outside-diameter-80mm-sku-24203000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 29 teeth tooth width 20mm outside diameter 77.5mm SKU: 24202900](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-29-teeth-tooth-width-20mm-outside-diameter-77-5mm-sku-24202900/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 26 teeth tooth width 20mm outside diameter 70mm SKU: 24202600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-26-teeth-tooth-width-20mm-outside-diameter-70mm-sku-24202600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm SKU: 24202500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-25-teeth-tooth-width-20mm-outside-diameter-67-5mm-sku-24202500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 24 teeth tooth width 20mm outside diameter 65mm SKU: 24202400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-24-teeth-tooth-width-20mm-outside-diameter-65mm-sku-24202400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 23 teeth tooth width 20mm outside diameter 62.5mm SKU: 24202300](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-23-teeth-tooth-width-20mm-outside-diameter-62-5mm-sku-24202300/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 22 teeth tooth width 20mm outside diameter 60mm SKU: 24202200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-22-teeth-tooth-width-20mm-outside-diameter-60mm-sku-24202200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 20 teeth tooth width 20mm outside diameter 55mm SKU: 24202000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-20-teeth-tooth-width-20mm-outside-diameter-55mm-sku-24202000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2.5 18 teeth tooth width 20mm outside diameter 50mm SKU: 24201800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-5-18-teeth-tooth-width-20mm-outside-diameter-50mm-sku-24201800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 120 teeth tooth width 16mm outside diameter 244mm SKU: 24112000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-120-teeth-tooth-width-16mm-outside-diameter-244mm-sku-24112000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 114 teeth tooth width 16mm outside diameter 232mm SKU: 24111400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-114-teeth-tooth-width-16mm-outside-diameter-232mm-sku-24111400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 127 teeth tooth width 20mm outside diameter 258mm SKU: 24111127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-127-teeth-tooth-width-20mm-outside-diameter-258mm-sku-24111127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 120 teeth tooth width 20mm outside diameter 244mm SKU: 24111120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-120-teeth-tooth-width-20mm-outside-diameter-244mm-sku-24111120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 114 teeth tooth width 20mm outside diameter 232mm SKU: 24111114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-114-teeth-tooth-width-20mm-outside-diameter-232mm-sku-24111114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 2 110 teeth tooth width 20mm outside diameter 224mm SKU: 24111110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-2-110-teeth-tooth-width-20mm-outside-diameter-224mm-sku-24111110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Shaft collar DIN703 bore 80mm black finish set screw 12.9 inner hexagon SKU: 62389280](https://maedler.in/product/shaft-collar-din703-bore-80mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389280/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 75mm black finish set screw 12.9 inner hexagon SKU: 62389275](https://maedler.in/product/shaft-collar-din703-bore-75mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389275/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 70mm black finish set screw 12.9 inner hexagon SKU: 62389270](https://maedler.in/product/shaft-collar-din703-bore-70mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389270/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 65mm black finish set screw 12.9 inner hexagon SKU: 62389265](https://maedler.in/product/shaft-collar-din703-bore-65mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389265/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 60mm black finish set screw 12.9 inner hexagon SKU: 62389260](https://maedler.in/product/shaft-collar-din703-bore-60mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389260/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 55mm black finish set screw 12.9 inner hexagon SKU: 62389255](https://maedler.in/product/shaft-collar-din703-bore-55mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389255/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 50mm black finish set screw 12.9 inner hexagon SKU: 62389250](https://maedler.in/product/shaft-collar-din703-bore-50mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389250/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 45mm black finish set screw 12.9 inner hexagon SKU: 62389245](https://maedler.in/product/shaft-collar-din703-bore-45mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389245/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 40mm black finish set screw 12.9 inner hexagon SKU: 62389240](https://maedler.in/product/shaft-collar-din703-bore-40mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389240/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 35mm black finish set screw 12.9 inner hexagon SKU: 62389235](https://maedler.in/product/shaft-collar-din703-bore-35mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389235/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 30mm black finish set screw 12.9 inner hexagon SKU: 62389230](https://maedler.in/product/shaft-collar-din703-bore-30mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389230/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 25mm black finish set screw 12.9 inner hexagon SKU: 62389225](https://maedler.in/product/shaft-collar-din703-bore-25mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389225/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 20mm black finish set screw 12.9 inner hexagon SKU: 62389220](https://maedler.in/product/shaft-collar-din703-bore-20mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389220/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN 705 A bore 100mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623891006](https://maedler.in/product/shaft-collar-din-705-a-bore-100mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623891006/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 90mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890906](https://maedler.in/product/shaft-collar-din-705-a-bore-90mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890906/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 85mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890856](https://maedler.in/product/shaft-collar-din-705-a-bore-85mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890856/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 80mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890806](https://maedler.in/product/shaft-collar-din-705-a-bore-80mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890806/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 75mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890756](https://maedler.in/product/shaft-collar-din-705-a-bore-75mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890756/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 70mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890706](https://maedler.in/product/shaft-collar-din-705-a-bore-70mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890706/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 70mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389070](https://maedler.in/product/shaft-collar-din-705-a-bore-70mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389070/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 65mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890656](https://maedler.in/product/shaft-collar-din-705-a-bore-65mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890656/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 65mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389065](https://maedler.in/product/shaft-collar-din-705-a-bore-65mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389065/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 63mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890636](https://maedler.in/product/shaft-collar-din-705-a-bore-63mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890636/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 63mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389063](https://maedler.in/product/shaft-collar-din-705-a-bore-63mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389063/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 60mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890606](https://maedler.in/product/shaft-collar-din-705-a-bore-60mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890606/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 60mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389060](https://maedler.in/product/shaft-collar-din-705-a-bore-60mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389060/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 56mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890566](https://maedler.in/product/shaft-collar-din-705-a-bore-56mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890566/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 56mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389056](https://maedler.in/product/shaft-collar-din-705-a-bore-56mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389056/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 55mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890556](https://maedler.in/product/shaft-collar-din-705-a-bore-55mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890556/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 55mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389055](https://maedler.in/product/shaft-collar-din-705-a-bore-55mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389055/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 50mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890506](https://maedler.in/product/shaft-collar-din-705-a-bore-50mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890506/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 50mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389050](https://maedler.in/product/shaft-collar-din-705-a-bore-50mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389050/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 48mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890486](https://maedler.in/product/shaft-collar-din-705-a-bore-48mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890486/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 48mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389048](https://maedler.in/product/shaft-collar-din-705-a-bore-48mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389048/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 45mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890456](https://maedler.in/product/shaft-collar-din-705-a-bore-45mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890456/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 45mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389045](https://maedler.in/product/shaft-collar-din-705-a-bore-45mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389045/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 42mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890426](https://maedler.in/product/shaft-collar-din-705-a-bore-42mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890426/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 42mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389042](https://maedler.in/product/shaft-collar-din-705-a-bore-42mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389042/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 40mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890406](https://maedler.in/product/shaft-collar-din-705-a-bore-40mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890406/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 40mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389040](https://maedler.in/product/shaft-collar-din-705-a-bore-40mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389040/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 38mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890386](https://maedler.in/product/shaft-collar-din-705-a-bore-38mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890386/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 38mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389038](https://maedler.in/product/shaft-collar-din-705-a-bore-38mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389038/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 36mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890366](https://maedler.in/product/shaft-collar-din-705-a-bore-36mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890366/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 36mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389036](https://maedler.in/product/shaft-collar-din-705-a-bore-36mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389036/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 35mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890356](https://maedler.in/product/shaft-collar-din-705-a-bore-35mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890356/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 35mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389035](https://maedler.in/product/shaft-collar-din-705-a-bore-35mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389035/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 32mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890326](https://maedler.in/product/shaft-collar-din-705-a-bore-32mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890326/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 32mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389032](https://maedler.in/product/shaft-collar-din-705-a-bore-32mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389032/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 30mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890306](https://maedler.in/product/shaft-collar-din-705-a-bore-30mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890306/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 30mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389030](https://maedler.in/product/shaft-collar-din-705-a-bore-30mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389030/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 28mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890286](https://maedler.in/product/shaft-collar-din-705-a-bore-28mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890286/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 28mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389028](https://maedler.in/product/shaft-collar-din-705-a-bore-28mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389028/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 26mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890266](https://maedler.in/product/shaft-collar-din-705-a-bore-26mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890266/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 26mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389026](https://maedler.in/product/shaft-collar-din-705-a-bore-26mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389026/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 25mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890256](https://maedler.in/product/shaft-collar-din-705-a-bore-25mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890256/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 25mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389025](https://maedler.in/product/shaft-collar-din-705-a-bore-25mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389025/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 24mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890246](https://maedler.in/product/shaft-collar-din-705-a-bore-24mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890246/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 24mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389024](https://maedler.in/product/shaft-collar-din-705-a-bore-24mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389024/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 22mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890226](https://maedler.in/product/shaft-collar-din-705-a-bore-22mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890226/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 22mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389022](https://maedler.in/product/shaft-collar-din-705-a-bore-22mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389022/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 20mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890206](https://maedler.in/product/shaft-collar-din-705-a-bore-20mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890206/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 20mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389020](https://maedler.in/product/shaft-collar-din-705-a-bore-20mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389020/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 18mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890186](https://maedler.in/product/shaft-collar-din-705-a-bore-18mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890186/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 18mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389018](https://maedler.in/product/shaft-collar-din-705-a-bore-18mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389018/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 16mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890166](https://maedler.in/product/shaft-collar-din-705-a-bore-16mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890166/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 16mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389016](https://maedler.in/product/shaft-collar-din-705-a-bore-16mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389016/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 15mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890156](https://maedler.in/product/shaft-collar-din-705-a-bore-15mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890156/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 15mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389015](https://maedler.in/product/shaft-collar-din-705-a-bore-15mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389015/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 14mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890146](https://maedler.in/product/shaft-collar-din-705-a-bore-14mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890146/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 14mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389014](https://maedler.in/product/shaft-collar-din-705-a-bore-14mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389014/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 12mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890126](https://maedler.in/product/shaft-collar-din-705-a-bore-12mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890126/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 12mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389012](https://maedler.in/product/shaft-collar-din-705-a-bore-12mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389012/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 11mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890116](https://maedler.in/product/shaft-collar-din-705-a-bore-11mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890116/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 11mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389011](https://maedler.in/product/shaft-collar-din-705-a-bore-11mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389011/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 10mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890106](https://maedler.in/product/shaft-collar-din-705-a-bore-10mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890106/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 10mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389010](https://maedler.in/product/shaft-collar-din-705-a-bore-10mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389010/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 9mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890096](https://maedler.in/product/shaft-collar-din-705-a-bore-9mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890096/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 9mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389009](https://maedler.in/product/shaft-collar-din-705-a-bore-9mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389009/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 8mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890086](https://maedler.in/product/shaft-collar-din-705-a-bore-8mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890086/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 8mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389008](https://maedler.in/product/shaft-collar-din-705-a-bore-8mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389008/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 7mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890076](https://maedler.in/product/shaft-collar-din-705-a-bore-7mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890076/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 7mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389007](https://maedler.in/product/shaft-collar-din-705-a-bore-7mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389007/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 6mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890066](https://maedler.in/product/shaft-collar-din-705-a-bore-6mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890066/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 6mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389006](https://maedler.in/product/shaft-collar-din-705-a-bore-6mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389006/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 5mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890056](https://maedler.in/product/shaft-collar-din-705-a-bore-5mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890056/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 5mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389005](https://maedler.in/product/shaft-collar-din-705-a-bore-5mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389005/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 4mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890046](https://maedler.in/product/shaft-collar-din-705-a-bore-4mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890046/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 4mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389004](https://maedler.in/product/shaft-collar-din-705-a-bore-4mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389004/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 3mm black finish set screw DIN EN ISO 4027 (old DIN 914) SKU: 623890036](https://maedler.in/product/shaft-collar-din-705-a-bore-3mm-black-finish-set-screw-din-en-iso-4027-old-din-914-sku-623890036/): Light-duty series. With set screw made from steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 3mmm black finish set screw DIN EN 27434 (old DIN 553) SKU: 62389003](https://maedler.in/product/shaft-collar-din-705-a-bore-3mmm-black-finish-set-screw-din-en-27434-old-din-553-sku-62389003/): Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from steel with black oxide finish.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Clamp collar double-split steel C45 zinc-plated bore 100mm with screws DIN 912 12.9 SKU: 62388500](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-100mm-with-screws-din-912-12-9-sku-62388500/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 90mm with screws DIN 912 12.9 SKU: 62388490](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-90mm-with-screws-din-912-12-9-sku-62388490/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 80mm with screws DIN 912 12.9 SKU: 62388480](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-80mm-with-screws-din-912-12-9-sku-62388480/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 75mm with screws DIN 912 12.9 SKU: 62388475](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-75mm-with-screws-din-912-12-9-sku-62388475/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 70mm with screws DIN 912 12.9 SKU: 62388470](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-70mm-with-screws-din-912-12-9-sku-62388470/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 65mm with screws DIN 912 12.9 SKU: 62388465](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-65mm-with-screws-din-912-12-9-sku-62388465/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 60mm with screws DIN 912 12.9 SKU: 62388460](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-60mm-with-screws-din-912-12-9-sku-62388460/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 55mm with screws DIN 912 12.9 SKU: 62388455](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-55mm-with-screws-din-912-12-9-sku-62388455/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 50mm with screws DIN 912 12.9 SKU: 62388450](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-50mm-with-screws-din-912-12-9-sku-62388450/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split steel C45 zinc-plated bore 48mm with screws DIN 912 12.9 SKU: 62388448](https://maedler.in/product/clamp-collar-double-split-steel-c45-zinc-plated-bore-48mm-with-screws-din-912-12-9-sku-62388448/): Material: Steel C45, zinc-plated . Screws steel 12.9.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Spur gear made of steel C45 without hub module 5 45 teeth tooth width 50mm outside diameter 235mm SKU: 24511045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-45-teeth-tooth-width-50mm-outside-diameter-235mm-sku-24511045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 40 teeth tooth width 50mm outside diameter 210mm SKU: 24511040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-40-teeth-tooth-width-50mm-outside-diameter-210mm-sku-24511040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 38 teeth tooth width 50mm outside diameter 200mm SKU: 24511038](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-38-teeth-tooth-width-50mm-outside-diameter-200mm-sku-24511038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 35 teeth tooth width 50mm outside diameter 185mm SKU: 24511035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-35-teeth-tooth-width-50mm-outside-diameter-185mm-sku-24511035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 32 teeth tooth width 50mm outside diameter 170mm SKU: 24511032](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-32-teeth-tooth-width-50mm-outside-diameter-170mm-sku-24511032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 30 teeth tooth width 50mm outside diameter 160mm SKU: 24511030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-30-teeth-tooth-width-50mm-outside-diameter-160mm-sku-24511030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 25 teeth tooth width 50mm outside diameter 135mm SKU: 24511025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-25-teeth-tooth-width-50mm-outside-diameter-135mm-sku-24511025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 24 teeth tooth width 50mm outside diameter 130mm SKU: 24511024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-24-teeth-tooth-width-50mm-outside-diameter-130mm-sku-24511024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 20 teeth tooth width 50mm outside diameter 110mm SKU: 24511020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-20-teeth-tooth-width-50mm-outside-diameter-110mm-sku-24511020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 70 teeth tooth width 40mm outside diameter 360mm SKU: 24507000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-70-teeth-tooth-width-40mm-outside-diameter-360mm-sku-24507000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 65 teeth tooth width 40mm outside diameter 335mm SKU: 24506500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-65-teeth-tooth-width-40mm-outside-diameter-335mm-sku-24506500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 60 teeth tooth width 40mm outside diameter 310mm SKU: 24506000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-60-teeth-tooth-width-40mm-outside-diameter-310mm-sku-24506000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 52 teeth tooth width 40mm outside diameter 270mm SKU: 24505200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-52-teeth-tooth-width-40mm-outside-diameter-270mm-sku-24505200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 50 teeth tooth width 40mm outside diameter 260mm SKU: 24505000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-50-teeth-tooth-width-40mm-outside-diameter-260mm-sku-24505000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 48 teeth tooth width 40mm outside diameter 250mm SKU: 24504800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-48-teeth-tooth-width-40mm-outside-diameter-250mm-sku-24504800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 45 teeth tooth width 40mm outside diameter 235mm SKU: 24504500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-45-teeth-tooth-width-40mm-outside-diameter-235mm-sku-24504500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 40 teeth tooth width 40mm outside diameter 210mm SKU: 24504000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-40-teeth-tooth-width-40mm-outside-diameter-210mm-sku-24504000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 38 teeth tooth width 40mm outside diameter 200mm SKU: 24503800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-38-teeth-tooth-width-40mm-outside-diameter-200mm-sku-24503800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 36 teeth tooth width 40mm outside diameter 190mm SKU: 24503600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-36-teeth-tooth-width-40mm-outside-diameter-190mm-sku-24503600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 35 teeth tooth width 40mm outside diameter 185mm SKU: 24503500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-35-teeth-tooth-width-40mm-outside-diameter-185mm-sku-24503500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 30 teeth tooth width 40mm outside diameter 160mm SKU: 24503000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-30-teeth-tooth-width-40mm-outside-diameter-160mm-sku-24503000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 25 teeth tooth width 40mm outside diameter 135mm SKU: 24502500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-25-teeth-tooth-width-40mm-outside-diameter-135mm-sku-24502500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 20 teeth tooth width 40mm outside diameter 110mm SKU: 24502000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-20-teeth-tooth-width-40mm-outside-diameter-110mm-sku-24502000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 114 teeth tooth width 40mm outside diameter 464mm SKU: 24411114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-114-teeth-tooth-width-40mm-outside-diameter-464mm-sku-24411114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 110 teeth tooth width 40mm outside diameter 448mm SKU: 24411110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-110-teeth-tooth-width-40mm-outside-diameter-448mm-sku-24411110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 100 teeth tooth width 40mm outside diameter 408mm SKU: 24411100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-100-teeth-tooth-width-40mm-outside-diameter-408mm-sku-24411100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 95 teeth tooth width 40mm outside diameter 388mm SKU: 24411095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-95-teeth-tooth-width-40mm-outside-diameter-388mm-sku-24411095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 90 teeth tooth width 40mm outside diameter 368mm SKU: 24411090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-90-teeth-tooth-width-40mm-outside-diameter-368mm-sku-24411090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 85 teeth tooth width 40mm outside diameter 348mm SKU: 24411085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-85-teeth-tooth-width-40mm-outside-diameter-348mm-sku-24411085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 80 teeth tooth width 40mm outside diameter 328mm SKU: 24411080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-80-teeth-tooth-width-40mm-outside-diameter-328mm-sku-24411080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 76 teeth tooth width 40mm outside diameter 312mm SKU: 24411076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-76-teeth-tooth-width-40mm-outside-diameter-312mm-sku-24411076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 75 teeth tooth width 40mm outside diameter 308mm SKU: 24411075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-75-teeth-tooth-width-40mm-outside-diameter-308mm-sku-24411075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 70 teeth tooth width 40mm outside diameter 288mm SKU: 24411070](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-70-teeth-tooth-width-40mm-outside-diameter-288mm-sku-24411070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 65 teeth tooth width 40mm outside diameter 268mm SKU: 24411065](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-65-teeth-tooth-width-40mm-outside-diameter-268mm-sku-24411065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 24411060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-24411060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 57 teeth tooth width 40mm outside diameter 236mm SKU: 24411057](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-57-teeth-tooth-width-40mm-outside-diameter-236mm-sku-24411057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 55 teeth tooth width 40mm outside diameter 228mm SKU: 24411055](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-55-teeth-tooth-width-40mm-outside-diameter-228mm-sku-24411055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 52 teeth tooth width 40mm outside diameter 216mm SKU: 24411052](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-52-teeth-tooth-width-40mm-outside-diameter-216mm-sku-24411052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 24411050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-24411050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 48 teeth tooth width 40mm outside diameter 200mm SKU: 24411048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-48-teeth-tooth-width-40mm-outside-diameter-200mm-sku-24411048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 45 teeth tooth width 40mm outside diameter 188mm SKU: 24411045](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-45-teeth-tooth-width-40mm-outside-diameter-188mm-sku-24411045/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 24411040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-24411040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 38 teeth tooth width 40mm outside diameter 160mm SKU: 24411038](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-38-teeth-tooth-width-40mm-outside-diameter-160mm-sku-24411038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 24411036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-24411036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 35 teeth tooth width 40mm outside diameter 148mm SKU: 24411035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-35-teeth-tooth-width-40mm-outside-diameter-148mm-sku-24411035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 24411030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-24411030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 24411025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-24411025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 24411024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-24411024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 24411020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-24411020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 96 teeth tooth width 30mm outside diameter 392mm SKU: 24409600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-96-teeth-tooth-width-30mm-outside-diameter-392mm-sku-24409600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 90 teeth tooth width 30mm outside diameter 368mm SKU: 24409000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-90-teeth-tooth-width-30mm-outside-diameter-368mm-sku-24409000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 80 teeth tooth width 30mm outside diameter 328mm SKU: 24408000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-80-teeth-tooth-width-30mm-outside-diameter-328mm-sku-24408000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 76 teeth tooth width 30mm outside diameter 312mm SKU: 24407600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-76-teeth-tooth-width-30mm-outside-diameter-312mm-sku-24407600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 70 teeth tooth width 30mm outside diameter 288mm SKU: 24407000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-70-teeth-tooth-width-30mm-outside-diameter-288mm-sku-24407000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 67 teeth tooth width 30mm outside diameter 276mm SKU: 24406700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-67-teeth-tooth-width-30mm-outside-diameter-276mm-sku-24406700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 65 teeth tooth width 30mm outside diameter 268mm SKU: 24406500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-65-teeth-tooth-width-30mm-outside-diameter-268mm-sku-24406500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 60 teeth tooth width 30mm outside diameter 248mm SKU: 24406000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-60-teeth-tooth-width-30mm-outside-diameter-248mm-sku-24406000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 56 teeth tooth width 30mm outside diameter 232mm SKU: 24405600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-56-teeth-tooth-width-30mm-outside-diameter-232mm-sku-24405600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 52 teeth tooth width 30mm outside diameter 216mm SKU: 24405200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-52-teeth-tooth-width-30mm-outside-diameter-216mm-sku-24405200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 50 teeth tooth width 30mm outside diameter 208mm SKU: 24405000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-50-teeth-tooth-width-30mm-outside-diameter-208mm-sku-24405000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 48 teeth tooth width 30mm outside diameter 200mm SKU: 24404800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-48-teeth-tooth-width-30mm-outside-diameter-200mm-sku-24404800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 47 teeth tooth width 30mm outside diameter 196mm SKU: 24404700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-47-teeth-tooth-width-30mm-outside-diameter-196mm-sku-24404700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 46 teeth tooth width 30mm outside diameter 192mm SKU: 24404600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-46-teeth-tooth-width-30mm-outside-diameter-192mm-sku-24404600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 45 teeth tooth width 30mm outside diameter 188mm SKU: 24404500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-45-teeth-tooth-width-30mm-outside-diameter-188mm-sku-24404500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 42 teeth tooth width 30mm outside diameter 176mm SKU: 24404200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-42-teeth-tooth-width-30mm-outside-diameter-176mm-sku-24404200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 40 teeth tooth width 30mm outside diameter 168mm SKU: 24404000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-40-teeth-tooth-width-30mm-outside-diameter-168mm-sku-24404000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 38 teeth tooth width 30mm outside diameter 160mm SKU: 24403800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-38-teeth-tooth-width-30mm-outside-diameter-160mm-sku-24403800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 37 teeth tooth width 30mm outside diameter 156mm SKU: 24403700](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-37-teeth-tooth-width-30mm-outside-diameter-156mm-sku-24403700/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 36 teeth tooth width 30mm outside diameter 152mm SKU: 24403600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-36-teeth-tooth-width-30mm-outside-diameter-152mm-sku-24403600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 35 teeth tooth width 30mm outside diameter 148mm SKU: 24403500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-35-teeth-tooth-width-30mm-outside-diameter-148mm-sku-24403500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 30 teeth tooth width 30mm outside diameter 128mm SKU: 24403000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-30-teeth-tooth-width-30mm-outside-diameter-128mm-sku-24403000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 25 teeth tooth width 30mm outside diameter 108mm SKU: 24402500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-25-teeth-tooth-width-30mm-outside-diameter-108mm-sku-24402500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 24 teeth tooth width 30mm outside diameter 104mm SKU: 24402400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-24-teeth-tooth-width-30mm-outside-diameter-104mm-sku-24402400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 4 20 teeth tooth width 30mm outside diameter 88mm SKU: 24402000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-4-20-teeth-tooth-width-30mm-outside-diameter-88mm-sku-24402000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 114 teeth tooth width 25mm outside diameter 348mm SKU: 24311400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-114-teeth-tooth-width-25mm-outside-diameter-348mm-sku-24311400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 127 teeth tooth width 30mm outside diameter 367mm SKU: 24311127](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-127-teeth-tooth-width-30mm-outside-diameter-367mm-sku-24311127/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 120 teeth tooth width 30mm outside diameter 366mm SKU: 24311120](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-120-teeth-tooth-width-30mm-outside-diameter-366mm-sku-24311120/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 114 teeth tooth width 30mm outside diameter 348mm SKU: 24311114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-114-teeth-tooth-width-30mm-outside-diameter-348mm-sku-24311114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 110 teeth tooth width 30mm outside diameter 336mm SKU: 24311110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-110-teeth-tooth-width-30mm-outside-diameter-336mm-sku-24311110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 100 teeth tooth width 30mm outside diameter 306mm SKU: 24311100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-100-teeth-tooth-width-30mm-outside-diameter-306mm-sku-24311100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 95 teeth tooth width 30mm outside diameter 291mm SKU: 24311095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-95-teeth-tooth-width-30mm-outside-diameter-291mm-sku-24311095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 90 teeth tooth width 30mm outside diameter 276mm SKU: 24311090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-90-teeth-tooth-width-30mm-outside-diameter-276mm-sku-24311090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 85 teeth tooth width 30mm outside diameter 261mm SKU: 24311085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-85-teeth-tooth-width-30mm-outside-diameter-261mm-sku-24311085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 80 teeth tooth width 30mm outside diameter 246mm SKU: 24311080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-80-teeth-tooth-width-30mm-outside-diameter-246mm-sku-24311080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 76 teeth tooth width 30mm outside diameter 234mm SKU: 24311076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-76-teeth-tooth-width-30mm-outside-diameter-234mm-sku-24311076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 75 teeth tooth width 30mm outside diameter 231mm SKU: 24311075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-75-teeth-tooth-width-30mm-outside-diameter-231mm-sku-24311075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 72 teeth tooth width 30mm outside diameter 222mm SKU: 24311072](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-72-teeth-tooth-width-30mm-outside-diameter-222mm-sku-24311072/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 70 teeth tooth width 30mm outside diameter 216mm SKU: 24311070](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-70-teeth-tooth-width-30mm-outside-diameter-216mm-sku-24311070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 65 teeth tooth width 30mm outside diameter 201mm SKU: 24311065](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-65-teeth-tooth-width-30mm-outside-diameter-201mm-sku-24311065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 24311060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-24311060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 57 teeth tooth width 30mm outside diameter 177mm SKU: 24311057](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-57-teeth-tooth-width-30mm-outside-diameter-177mm-sku-24311057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 55 teeth tooth width 30mm outside diameter 171mm SKU: 24311055](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-55-teeth-tooth-width-30mm-outside-diameter-171mm-sku-24311055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 52 teeth tooth width 30mm outside diameter 162mm SKU: 24311052](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-52-teeth-tooth-width-30mm-outside-diameter-162mm-sku-24311052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 24311050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-24311050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 24311048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-24311048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 24311040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-24311040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 24311030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-24311030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 24311025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-24311025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 24311024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-24311024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 24311020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-24311020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Clamp collar single-split stainless steel 1.4305 bore 8mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62399108K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-8mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62399108k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 8mm with bolt DIN 912 A2-70 SKU: 62399108](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-8mm-with-bolt-din-912-a2-70-sku-62399108/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 7mm with bolt DIN 912 A2-70 SKU: 62399107](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-7mm-with-bolt-din-912-a2-70-sku-62399107/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 6mm with bolt DIN 912 A2-70 type S SKU: 62399106S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-6mm-with-bolt-din-912-a2-70-type-s-sku-62399106s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 6mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62399106K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-6mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62399106k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 6mm with bolt DIN 912 A2-70 SKU: 62399106](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-6mm-with-bolt-din-912-a2-70-sku-62399106/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 5mm with bolt DIN 912 A2-70 type S SKU: 62399105S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-5mm-with-bolt-din-912-a2-70-type-s-sku-62399105s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 5mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62399105K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-5mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62399105k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 5mm with bolt DIN 912 A2-70 SKU: 62399105](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-5mm-with-bolt-din-912-a2-70-sku-62399105/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 4mm with bolt DIN 912 A2-70 SKU: 62399104](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-4mm-with-bolt-din-912-a2-70-sku-62399104/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 3mm with bolt DIN 912 A2-70 SKU: 62399103](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-3mm-with-bolt-din-912-a2-70-sku-62399103/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Shaft collar DIN 705 A bore 100mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623991006](https://maedler.in/product/shaft-collar-din-705-a-bore-100mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623991006/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 90mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990906](https://maedler.in/product/shaft-collar-din-705-a-bore-90mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990906/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 85mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990856](https://maedler.in/product/shaft-collar-din-705-a-bore-85mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990856/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 80mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990806](https://maedler.in/product/shaft-collar-din-705-a-bore-80mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990806/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 75mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990756](https://maedler.in/product/shaft-collar-din-705-a-bore-75mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990756/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 70mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990706](https://maedler.in/product/shaft-collar-din-705-a-bore-70mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990706/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 70mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399070](https://maedler.in/product/shaft-collar-din-705-a-bore-70mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399070/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 65mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990656](https://maedler.in/product/shaft-collar-din-705-a-bore-65mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990656/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 65mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399065](https://maedler.in/product/shaft-collar-din-705-a-bore-65mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399065/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 63mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990636](https://maedler.in/product/shaft-collar-din-705-a-bore-63mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990636/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 63mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399063](https://maedler.in/product/shaft-collar-din-705-a-bore-63mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399063/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 60mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990606](https://maedler.in/product/shaft-collar-din-705-a-bore-60mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990606/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 60mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399060](https://maedler.in/product/shaft-collar-din-705-a-bore-60mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399060/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 56mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990566](https://maedler.in/product/shaft-collar-din-705-a-bore-56mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990566/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 56mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399056](https://maedler.in/product/shaft-collar-din-705-a-bore-56mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399056/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 55mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990556](https://maedler.in/product/shaft-collar-din-705-a-bore-55mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990556/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 55mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399055](https://maedler.in/product/shaft-collar-din-705-a-bore-55mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399055/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 50mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990506](https://maedler.in/product/shaft-collar-din-705-a-bore-50mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990506/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 50mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399050](https://maedler.in/product/shaft-collar-din-705-a-bore-50mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399050/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 48mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990486](https://maedler.in/product/shaft-collar-din-705-a-bore-48mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990486/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 48mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399048](https://maedler.in/product/shaft-collar-din-705-a-bore-48mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399048/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 45mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990456](https://maedler.in/product/shaft-collar-din-705-a-bore-45mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990456/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 45mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399045](https://maedler.in/product/shaft-collar-din-705-a-bore-45mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399045/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 42mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990426](https://maedler.in/product/shaft-collar-din-705-a-bore-42mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990426/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 42mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399042](https://maedler.in/product/shaft-collar-din-705-a-bore-42mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399042/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 40mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990406](https://maedler.in/product/shaft-collar-din-705-a-bore-40mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990406/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 40mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399040](https://maedler.in/product/shaft-collar-din-705-a-bore-40mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399040/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 38mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990386](https://maedler.in/product/shaft-collar-din-705-a-bore-38mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990386/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 38mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399038](https://maedler.in/product/shaft-collar-din-705-a-bore-38mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399038/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 36mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990366](https://maedler.in/product/shaft-collar-din-705-a-bore-36mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990366/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 36mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399036](https://maedler.in/product/shaft-collar-din-705-a-bore-36mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399036/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 35mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990356](https://maedler.in/product/shaft-collar-din-705-a-bore-35mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990356/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 35mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399035](https://maedler.in/product/shaft-collar-din-705-a-bore-35mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399035/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 32mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990326](https://maedler.in/product/shaft-collar-din-705-a-bore-32mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990326/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 32mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399032](https://maedler.in/product/shaft-collar-din-705-a-bore-32mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399032/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 30mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990306](https://maedler.in/product/shaft-collar-din-705-a-bore-30mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990306/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 30mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399030](https://maedler.in/product/shaft-collar-din-705-a-bore-30mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399030/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 28mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990286](https://maedler.in/product/shaft-collar-din-705-a-bore-28mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990286/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 28mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399028](https://maedler.in/product/shaft-collar-din-705-a-bore-28mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399028/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 26mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990266](https://maedler.in/product/shaft-collar-din-705-a-bore-26mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990266/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 26mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399026](https://maedler.in/product/shaft-collar-din-705-a-bore-26mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399026/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 25mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990256](https://maedler.in/product/shaft-collar-din-705-a-bore-25mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990256/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 25mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399025](https://maedler.in/product/shaft-collar-din-705-a-bore-25mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399025/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 24mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990246](https://maedler.in/product/shaft-collar-din-705-a-bore-24mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990246/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 24mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399024](https://maedler.in/product/shaft-collar-din-705-a-bore-24mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399024/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 22mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990226](https://maedler.in/product/shaft-collar-din-705-a-bore-22mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990226/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 22mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399022](https://maedler.in/product/shaft-collar-din-705-a-bore-22mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399022/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 20mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990206](https://maedler.in/product/shaft-collar-din-705-a-bore-20mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990206/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 20mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399020](https://maedler.in/product/shaft-collar-din-705-a-bore-20mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399020/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 18mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990186](https://maedler.in/product/shaft-collar-din-705-a-bore-18mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990186/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 18mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399018](https://maedler.in/product/shaft-collar-din-705-a-bore-18mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399018/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 16mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990166](https://maedler.in/product/shaft-collar-din-705-a-bore-16mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990166/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 16mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399016](https://maedler.in/product/shaft-collar-din-705-a-bore-16mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399016/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 15mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990156](https://maedler.in/product/shaft-collar-din-705-a-bore-15mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990156/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 15mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399015](https://maedler.in/product/shaft-collar-din-705-a-bore-15mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399015/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 14mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990146](https://maedler.in/product/shaft-collar-din-705-a-bore-14mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990146/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 14mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399014](https://maedler.in/product/shaft-collar-din-705-a-bore-14mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399014/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 12mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990126](https://maedler.in/product/shaft-collar-din-705-a-bore-12mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990126/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 12mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399012](https://maedler.in/product/shaft-collar-din-705-a-bore-12mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399012/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 11mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990116](https://maedler.in/product/shaft-collar-din-705-a-bore-11mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990116/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 11mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399011](https://maedler.in/product/shaft-collar-din-705-a-bore-11mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399011/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 10mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990106](https://maedler.in/product/shaft-collar-din-705-a-bore-10mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990106/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 10mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399010](https://maedler.in/product/shaft-collar-din-705-a-bore-10mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399010/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 9mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990096](https://maedler.in/product/shaft-collar-din-705-a-bore-9mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990096/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 9mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399009](https://maedler.in/product/shaft-collar-din-705-a-bore-9mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399009/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 8mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990086](https://maedler.in/product/shaft-collar-din-705-a-bore-8mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990086/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 8mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399008](https://maedler.in/product/shaft-collar-din-705-a-bore-8mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399008/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 7mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990076](https://maedler.in/product/shaft-collar-din-705-a-bore-7mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990076/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 7mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399007](https://maedler.in/product/shaft-collar-din-705-a-bore-7mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399007/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 6mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990066](https://maedler.in/product/shaft-collar-din-705-a-bore-6mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990066/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 6mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399006](https://maedler.in/product/shaft-collar-din-705-a-bore-6mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399006/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 5mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990056](https://maedler.in/product/shaft-collar-din-705-a-bore-5mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990056/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 5mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399005](https://maedler.in/product/shaft-collar-din-705-a-bore-5mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399005/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 4mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990046](https://maedler.in/product/shaft-collar-din-705-a-bore-4mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990046/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 4mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399004](https://maedler.in/product/shaft-collar-din-705-a-bore-4mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399004/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Shaft collar DIN 705 A bore 3mm stainless steel 1.4305 set screw DIN EN ISO 4027 (old DIN 914) SKU: 623990036](https://maedler.in/product/shaft-collar-din-705-a-bore-3mm-stainless-steel-1-4305-set-screw-din-en-iso-4027-old-din-914-sku-623990036/): Light-duty series. With set screw made from stainless steel with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw.From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC. - [Shaft collar DIN 705 A bore 3mmm stainless steel 1.4305 set screw DIN EN 27434 (old DIN 553) SKU: 62399003](https://maedler.in/product/shaft-collar-din-705-a-bore-3mmm-stainless-steel-1-4305-set-screw-din-en-27434-old-din-553-sku-62399003/): Material: 1.4305 (AISI 303).Light-duty series. With set screw DIN EN 27 434 (formerly DIN 553) made from stainless steel.Bright turned and kalibrated. Bores tolerance H8. Large chamfer on one side of the outside diameter. Size 9 not like DIN.Temperature range: -40ºC to +175ºC, - [Clamp collar with thread double split steel C45 black oxide finished thread M30 x 3,5 with bolts DIN 912 12.9 SKU: 62393000](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m30-x-35-with-bolts-din-912-12-9-sku-62393000/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split steel C45 black oxide finished thread M24 x 3,0 with bolts DIN 912 12.9 SKU: 62392400](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m24-x-30-with-bolts-din-912-12-9-sku-62392400/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split steel C45 black oxide finished thread M20 x 2,5 with bolts DIN 912 12.9 SKU: 62392000](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m20-x-25-with-bolts-din-912-12-9-sku-62392000/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split steel C45 black oxide finished thread M16 x 2,0 with bolts DIN 912 12.9 SKU: 62391600](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m16-x-20-with-bolts-din-912-12-9-sku-62391600/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split steel C45 black oxide finished thread M12 x 1,75 with bolts DIN 912 12.9 SKU: 62391200](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m12-x-175-with-bolts-din-912-12-9-sku-62391200/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split steel C45 black oxide finished thread M10 x 1,5 with bolts DIN 912 12.9 SKU: 62391000](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m10-x-15-with-bolts-din-912-12-9-sku-62391000/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split steel C45 black oxide finished thread M8 x 1,25 with bolts DIN 912 12.9 SKU: 62390800](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m8-x-125-with-bolts-din-912-12-9-sku-62390800/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split steel C45 black oxide finished thread M6 x 1,0 with bolts DIN 912 12.9 SKU: 62390600](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m6-x-10-with-bolts-din-912-12-9-sku-62390600/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split steel C45 black oxide finished thread M5 x 0.80 with bolts DIN 912 12.9 SKU: 62390500](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m5-x-0-80-with-bolts-din-912-12-9-sku-62390500/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split steel C45 black oxide finished thread M4 x 0.70 with bolts DIN 912 12.9 SKU: 62390400](https://maedler.in/product/clamp-collar-with-thread-double-split-steel-c45-black-oxide-finished-thread-m4-x-0-70-with-bolts-din-912-12-9-sku-62390400/): Material: Steel C45, black oxide finish. Screws steel 12.9.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Shaft collar DIN703 bore 90mm black finish set screw 12.9 inner hexagon SKU: 62389290](https://maedler.in/product/shaft-collar-din703-bore-90mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389290/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 85mm black finish set screw 12.9 inner hexagon SKU: 62389285](https://maedler.in/product/shaft-collar-din703-bore-85mm-black-finish-set-screw-12-9-inner-hexagon-sku-62389285/): Material: Steel, black oxide finish.Heavy-duty series. With allen set screw made from steel, like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.* Size 20 is not part of the old standard DIN 703.Other sizes and inch-sizes on request. - [Worm wheel made of bronze module 2 20 teeth double-thread right hand SKU: 30150700](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-20-teeth-double-thread-right-hand-sku-30150700/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 16 teeth double-thread right hand SKU: 30150500](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-16-teeth-double-thread-right-hand-sku-30150500/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 60 teeth single-thread right hand SKU: 30132400](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-60-teeth-single-thread-right-hand-sku-30132400/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 50 teeth single-thread right hand SKU: 30132000](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-50-teeth-single-thread-right-hand-sku-30132000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 40 teeth single-thread right hand SKU: 30131800](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-40-teeth-single-thread-right-hand-sku-30131800/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 30 teeth single-thread right hand SKU: 30131300](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-30-teeth-single-thread-right-hand-sku-30131300/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 20 teeth single-thread right hand SKU: 30130700](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-20-teeth-single-thread-right-hand-sku-30130700/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 18 teeth single-thread right hand SKU: 30130600](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-18-teeth-single-thread-right-hand-sku-30130600/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 2 16 teeth single-thread right hand SKU: 30130500](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-16-teeth-single-thread-right-hand-sku-30130500/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,50. Not self-locking. - [Worm wheel made of bronze module 1.5 100 teeth double-thread right hand SKU: 30123200](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-100-teeth-double-thread-right-hand-sku-30123200/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 50 teeth double-thread right hand SKU: 30122000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-50-teeth-double-thread-right-hand-sku-30122000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 40 teeth double-thread right hand SKU: 30121800](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-40-teeth-double-thread-right-hand-sku-30121800/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 30 teeth double-thread right hand SKU: 30121300](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-30-teeth-double-thread-right-hand-sku-30121300/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 20 teeth double-thread right hand SKU: 30120700](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-20-teeth-double-thread-right-hand-sku-30120700/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 18 teeth double-thread right hand SKU: 30120600](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-18-teeth-double-thread-right-hand-sku-30120600/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze module 1.5 16 teeth double-thread right hand SKU: 30120500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-16-teeth-double-thread-right-hand-sku-30120500/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49/0,65. Not self-locking. - [Worm wheel made of bronze, module 1.5 100 teeth single-thread right hand SKU: 30103200](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-100-teeth-single-thread-right-hand-sku-30103200/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 75 teeth single-thread right hand SKU: 30103000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-75-teeth-single-thread-right-hand-sku-30103000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 50 teeth single-thread right hand SKU: 30102000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-50-teeth-single-thread-right-hand-sku-30102000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 40 teeth single-thread right hand SKU: 30101800](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-40-teeth-single-thread-right-hand-sku-30101800/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 30 teeth single-thread right hand SKU: 30101300](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-30-teeth-single-thread-right-hand-sku-30101300/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 20 teeth single-thread right hand SKU: 30100700](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-20-teeth-single-thread-right-hand-sku-30100700/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 18 teeth single-thread right hand SKU: 30100600](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-18-teeth-single-thread-right-hand-sku-30100600/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze, module 1.5 16 teeth single-thread right hand SKU: 30100500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-5-16-teeth-single-thread-right-hand-sku-30100500/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,49 Not self-locking. - [Worm wheel made of bronze module 1 100 teeth double-thread right hand SKU: 30083200](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-100-teeth-double-thread-right-hand-sku-30083200/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 75 teeth double-thread right hand SKU: 30083000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-75-teeth-double-thread-right-hand-sku-30083000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 50 teeth double-thread right hand SKU: 30082000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-50-teeth-double-thread-right-hand-sku-30082000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 35 teeth double-thread right hand SKU: 30081500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-35-teeth-double-thread-right-hand-sku-30081500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 25 teeth double-thread right hand SKU: 30081000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-25-teeth-double-thread-right-hand-sku-30081000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 20 teeth double-thread right hand SKU: 30080700](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-20-teeth-double-thread-right-hand-sku-30080700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 16 teeth double-thread right hand SKU: 30080500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-16-teeth-double-thread-right-hand-sku-30080500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Not self-locking. - [Worm wheel made of bronze module 1 150 teeth single-thread right hand SKU: 30064000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-150-teeth-single-thread-right-hand-sku-30064000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 125 teeth single-thread right hand SKU: 30063500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-125-teeth-single-thread-right-hand-sku-30063500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 100 teeth single-thread right hand SKU: 30063200](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-100-teeth-single-thread-right-hand-sku-30063200/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 75 teeth single-thread right hand SKU: 30063000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-75-teeth-single-thread-right-hand-sku-30063000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 50 teeth single-thread right hand SKU: 30062000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-50-teeth-single-thread-right-hand-sku-30062000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 35 teeth single-thread right hand SKU: 30061500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-35-teeth-single-thread-right-hand-sku-30061500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 25 teeth single-thread right hand SKU: 30061000](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-25-teeth-single-thread-right-hand-sku-30061000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 20 teeth single-thread right hand SKU: 30060700](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-20-teeth-single-thread-right-hand-sku-30060700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 1 16 teeth single-thread right hand SKU: 30060500](https://maedler.in/product/worm-wheel-made-of-bronze-module-1-16-teeth-single-thread-right-hand-sku-30060500/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Not self-locking. - [Worm wheel made of bronze module 0.75 75 teeth double-thread right hand SKU: 30053000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-75-teeth-double-thread-right-hand-sku-30053000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,73. Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 50 teeth double-thread right hand SKU: 30052000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-50-teeth-double-thread-right-hand-sku-30052000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,73. Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 25 teeth double-thread right hand SKU: 30051000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-25-teeth-double-thread-right-hand-sku-30051000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,73. Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 20 teeth double-thread right hand SKU: 30050700](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-20-teeth-double-thread-right-hand-sku-30050700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,73. Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 100 teeth single-thread right hand SKU: 30033200](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-100-teeth-single-thread-right-hand-sku-30033200/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 75 teeth single-thread right hand SKU: 30033000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-75-teeth-single-thread-right-hand-sku-30033000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 50 teeth single-thread right hand SKU: 30032000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-50-teeth-single-thread-right-hand-sku-30032000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 25 teeth single-thread right hand SKU: 30031000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-25-teeth-single-thread-right-hand-sku-30031000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.75 20 teeth single-thread right hand SKU: 30030700](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-75-20-teeth-single-thread-right-hand-sku-30030700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,58 Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 75 teeth double-thread right hand SKU: 30023000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-75-teeth-double-thread-right-hand-sku-30023000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 50 teeth double-thread right hand SKU: 30022000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-50-teeth-double-thread-right-hand-sku-30022000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 25 teeth double-thread right hand SKU: 30021000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-25-teeth-double-thread-right-hand-sku-30021000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 20 teeth double-thread right hand SKU: 30020700](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-20-teeth-double-thread-right-hand-sku-30020700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,69. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 100 teeth single-thread right hand SKU: 30003200](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-100-teeth-single-thread-right-hand-sku-30003200/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 75 teeth single-thread right hand SKU: 30003000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-75-teeth-single-thread-right-hand-sku-30003000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 50 teeth single-thread right hand SKU: 30002000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-50-teeth-single-thread-right-hand-sku-30002000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 25 teeth single-thread right hand SKU: 30001000](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-25-teeth-single-thread-right-hand-sku-30001000/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Worm wheel made of bronze module 0.5 20 teeth single-thread right hand SKU: 30000700](https://maedler.in/product/worm-wheel-made-of-bronze-module-0-5-20-teeth-single-thread-right-hand-sku-30000700/): Material: G-CuSn12, with milled out, hollow teeth. With one-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,53. Limited self-locking capacity. - [Spur gear made of steel C45 without hub module 6 60 teeth tooth width 60mm outside diameter 372mm SKU: 24611060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-60-teeth-tooth-width-60mm-outside-diameter-372mm-sku-24611060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 50 teeth tooth width 60mm outside diameter 312mm SKU: 24611050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-50-teeth-tooth-width-60mm-outside-diameter-312mm-sku-24611050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 40 teeth tooth width 60mm outside diameter 252mm SKU: 24611040](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-40-teeth-tooth-width-60mm-outside-diameter-252mm-sku-24611040/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 38 teeth tooth width 60mm outside diameter 240mm SKU: 24611038](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-38-teeth-tooth-width-60mm-outside-diameter-240mm-sku-24611038/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 36 teeth tooth width 60mm outside diameter 228mm SKU: 24611036](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-36-teeth-tooth-width-60mm-outside-diameter-228mm-sku-24611036/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 35 teeth tooth width 60mm outside diameter 222mm SKU: 24611035](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-35-teeth-tooth-width-60mm-outside-diameter-222mm-sku-24611035/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 32 teeth tooth width 60mm outside diameter 204mm SKU: 24611032](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-32-teeth-tooth-width-60mm-outside-diameter-204mm-sku-24611032/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 30 teeth tooth width 60mm outside diameter 192mm SKU: 24611030](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-30-teeth-tooth-width-60mm-outside-diameter-192mm-sku-24611030/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 28 teeth tooth width 60mm outside diameter 180mm SKU: 24611028](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-28-teeth-tooth-width-60mm-outside-diameter-180mm-sku-24611028/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 25 teeth tooth width 60mm outside diameter 162mm SKU: 24611025](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-25-teeth-tooth-width-60mm-outside-diameter-162mm-sku-24611025/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 24 teeth tooth width 60mm outside diameter 156mm SKU: 24611024](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-24-teeth-tooth-width-60mm-outside-diameter-156mm-sku-24611024/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 20 teeth tooth width 60mm outside diameter 132mm SKU: 24611020](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-20-teeth-tooth-width-60mm-outside-diameter-132mm-sku-24611020/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 60 teeth tooth width 50mm outside diameter 372mm SKU: 24606000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-60-teeth-tooth-width-50mm-outside-diameter-372mm-sku-24606000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 56 teeth tooth width 50mm outside diameter 348mm SKU: 24605600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-56-teeth-tooth-width-50mm-outside-diameter-348mm-sku-24605600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 52 teeth tooth width 50mm outside diameter 324mm SKU: 24605200](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-52-teeth-tooth-width-50mm-outside-diameter-324mm-sku-24605200/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 50 teeth tooth width 50mm outside diameter 312mm SKU: 24605000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-50-teeth-tooth-width-50mm-outside-diameter-312mm-sku-24605000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 48 teeth tooth width 50mm outside diameter 300mm SKU: 24604800](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-48-teeth-tooth-width-50mm-outside-diameter-300mm-sku-24604800/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 45 teeth tooth width 50mm outside diameter 282mm SKU: 24604500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-45-teeth-tooth-width-50mm-outside-diameter-282mm-sku-24604500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 40 teeth tooth width 50mm outside diameter 252mm SKU: 24604000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-40-teeth-tooth-width-50mm-outside-diameter-252mm-sku-24604000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 36 teeth tooth width 50mm outside diameter 228mm SKU: 24603600](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-36-teeth-tooth-width-50mm-outside-diameter-228mm-sku-24603600/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 35 teeth tooth width 50mm outside diameter 222mm SKU: 24603500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-35-teeth-tooth-width-50mm-outside-diameter-222mm-sku-24603500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 30 teeth tooth width 50mm outside diameter 192mm SKU: 24603000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-30-teeth-tooth-width-50mm-outside-diameter-192mm-sku-24603000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 25 teeth tooth width 50mm outside diameter 162mm SKU: 24602500](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-25-teeth-tooth-width-50mm-outside-diameter-162mm-sku-24602500/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 24 teeth tooth width 50mm outside diameter 156mm SKU: 24602400](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-24-teeth-tooth-width-50mm-outside-diameter-156mm-sku-24602400/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 6 20 teeth tooth width 50mm outside diameter 132mm SKU: 24602000](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-6-20-teeth-tooth-width-50mm-outside-diameter-132mm-sku-24602000/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 114 teeth tooth width 50mm outside diameter 580mm SKU: 24511114](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-114-teeth-tooth-width-50mm-outside-diameter-580mm-sku-24511114/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 110 teeth tooth width 50mm outside diameter 560mm SKU: 24511110](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-110-teeth-tooth-width-50mm-outside-diameter-560mm-sku-24511110/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 100 teeth tooth width 50mm outside diameter 510mm SKU: 24511100](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-100-teeth-tooth-width-50mm-outside-diameter-510mm-sku-24511100/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 95 teeth tooth width 50mm outside diameter 485mm SKU: 24511095](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-95-teeth-tooth-width-50mm-outside-diameter-485mm-sku-24511095/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 90 teeth tooth width 50mm outside diameter 460mm SKU: 24511090](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-90-teeth-tooth-width-50mm-outside-diameter-460mm-sku-24511090/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 85 teeth tooth width 50mm outside diameter 435mm SKU: 24511085](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-85-teeth-tooth-width-50mm-outside-diameter-435mm-sku-24511085/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 80 teeth tooth width 50mm outside diameter 410mm SKU: 24511080](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-80-teeth-tooth-width-50mm-outside-diameter-410mm-sku-24511080/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 76 teeth tooth width 50mm outside diameter 390mm SKU: 24511076](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-76-teeth-tooth-width-50mm-outside-diameter-390mm-sku-24511076/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 75 teeth tooth width 50mm outside diameter 385mm SKU: 24511075](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-75-teeth-tooth-width-50mm-outside-diameter-385mm-sku-24511075/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 70 teeth tooth width 50mm outside diameter 360mm SKU: 24511070](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-70-teeth-tooth-width-50mm-outside-diameter-360mm-sku-24511070/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 65 teeth tooth width 50mm outside diameter 335mm SKU: 24511065](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-65-teeth-tooth-width-50mm-outside-diameter-335mm-sku-24511065/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 60 teeth tooth width 50mm outside diameter 310mm SKU: 24511060](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-60-teeth-tooth-width-50mm-outside-diameter-310mm-sku-24511060/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 57 teeth tooth width 50mm outside diameter 295mm SKU: 24511057](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-57-teeth-tooth-width-50mm-outside-diameter-295mm-sku-24511057/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 55 teeth tooth width 50mm outside diameter 285mm SKU: 24511055](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-55-teeth-tooth-width-50mm-outside-diameter-285mm-sku-24511055/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 52 teeth tooth width 50mm outside diameter 270mm SKU: 24511052](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-52-teeth-tooth-width-50mm-outside-diameter-270mm-sku-24511052/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 50 teeth tooth width 50mm outside diameter 260mm SKU: 24511050](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-50-teeth-tooth-width-50mm-outside-diameter-260mm-sku-24511050/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 without hub module 5 48 teeth tooth width 50mm outside diameter 250mm SKU: 24511048](https://maedler.in/product/spur-gear-made-of-steel-c45-without-hub-module-5-48-teeth-tooth-width-50mm-outside-diameter-250mm-sku-24511048/): Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Clamp collar single-split stainless steel 1.4305 bore 30mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62399130K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-30mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62399130k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 30mm with adjustable clamp lever M6 x 16 length 45mm type GRK SKU: 62399130GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-30mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-type-grk-sku-62399130grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 30mm with bolt DIN 912 A2-70 type GR SKU: 62399130GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-30mm-with-bolt-din-912-a2-70-type-gr-sku-62399130gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 30mm with bolt DIN 912 A2-70 type GA SKU: 62399130GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-30mm-with-bolt-din-912-a2-70-type-ga-sku-62399130ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 30mm with bolt DIN 912 A2-70 type B2 SKU: 62399130B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-30mm-with-bolt-din-912-a2-70-type-b2-sku-62399130b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 30mm with bolt DIN 912 A2-70 type B1 SKU: 62399130B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-30mm-with-bolt-din-912-a2-70-type-b1-sku-62399130b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 30mm with bolt DIN 912 A2-70 SKU: 62399130](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-30mm-with-bolt-din-912-a2-70-sku-62399130/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 28mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62399128K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-28mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62399128k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 28mm with bolt DIN 912 A2-70 type GR SKU: 62399128GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-28mm-with-bolt-din-912-a2-70-type-gr-sku-62399128gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 28mm with bolt DIN 912 A2-70 type GA SKU: 62399128GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-28mm-with-bolt-din-912-a2-70-type-ga-sku-62399128ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 28mm with bolt DIN 912 A2-70 type B2 SKU: 62399128B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-28mm-with-bolt-din-912-a2-70-type-b2-sku-62399128b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 28mm with bolt DIN 912 A2-70 type B1 SKU: 62399128B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-28mm-with-bolt-din-912-a2-70-type-b1-sku-62399128b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 28mm with bolt DIN 912 A2-70 SKU: 62399128](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-28mm-with-bolt-din-912-a2-70-sku-62399128/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 26mm with bolt DIN 912 A2-70 SKU: 62399126](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-26mm-with-bolt-din-912-a2-70-sku-62399126/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 25mm with bolt DIN 912 A2-70 type S SKU: 62399125S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-25mm-with-bolt-din-912-a2-70-type-s-sku-62399125s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 25mm with bolt DIN 912 A2-70 type N SKU: 62399125N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-25mm-with-bolt-din-912-a2-70-type-n-sku-62399125n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 25mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62399125K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-25mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62399125k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 25mm with adjustable clamp lever M6 x 16 length 45mm type GRK SKU: 62399125GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-25mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-type-grk-sku-62399125grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 25mm with bolt DIN 912 A2-70 type GR SKU: 62399125GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-25mm-with-bolt-din-912-a2-70-type-gr-sku-62399125gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 25mm with bolt DIN 912 A2-70 type GA SKU: 62399125GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-25mm-with-bolt-din-912-a2-70-type-ga-sku-62399125ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 25mm with bolt DIN 912 A2-70 type B2 SKU: 62399125B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-25mm-with-bolt-din-912-a2-70-type-b2-sku-62399125b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 25mm with bolt DIN 912 A2-70 type B1 SKU: 62399125B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-25mm-with-bolt-din-912-a2-70-type-b1-sku-62399125b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 25mm with bolt DIN 912 A2-70 SKU: 62399125](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-25mm-with-bolt-din-912-a2-70-sku-62399125/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 24mm with bolt DIN 912 A2-70 type S SKU: 62399124S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-24mm-with-bolt-din-912-a2-70-type-s-sku-62399124s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 24mm with bolt DIN 912 A2-70 SKU: 62399124](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-24mm-with-bolt-din-912-a2-70-sku-62399124/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 23mm with bolt DIN 912 A2-70 SKU: 62399123](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-23mm-with-bolt-din-912-a2-70-sku-62399123/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 22mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62399122K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-22mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62399122k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 22mm with adjustable clamp lever M6 x 16 length 45mm type GRK SKU: 62399122GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-22mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-type-grk-sku-62399122grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 22mm with bolt DIN 912 A2-70 type GR SKU: 62399122GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-22mm-with-bolt-din-912-a2-70-type-gr-sku-62399122gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 22mm with bolt DIN 912 A2-70 type GA SKU: 62399122GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-22mm-with-bolt-din-912-a2-70-type-ga-sku-62399122ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 22mm with bolt DIN 912 A2-70 type B2 SKU: 62399122B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-22mm-with-bolt-din-912-a2-70-type-b2-sku-62399122b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 22mm with bolt DIN 912 A2-70 type B1 SKU: 62399122B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-22mm-with-bolt-din-912-a2-70-type-b1-sku-62399122b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 22mm with bolt DIN 912 A2-70 SKU: 62399122](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-22mm-with-bolt-din-912-a2-70-sku-62399122/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 21mm with bolt DIN 912 A2-70 SKU: 62399121](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-21mm-with-bolt-din-912-a2-70-sku-62399121/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 20mm with bolt DIN 912 A2-70 type S SKU: 62399120S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-20mm-with-bolt-din-912-a2-70-type-s-sku-62399120s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 20mm with bolt DIN 912 A2-70 type N SKU: 62399120N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-20mm-with-bolt-din-912-a2-70-type-n-sku-62399120n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 20mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62399120K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-20mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62399120k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 20mm with adjustable clamp lever M6 x 16 length 45mm type GRK SKU: 62399120GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-20mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-type-grk-sku-62399120grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 20mm with bolt DIN 912 A2-70 type GR SKU: 62399120GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-20mm-with-bolt-din-912-a2-70-type-gr-sku-62399120gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 20mm with bolt DIN 912 A2-70 type GA SKU: 62399120GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-20mm-with-bolt-din-912-a2-70-type-ga-sku-62399120ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 20mm with bolt DIN 912 A2-70 type B2 SKU: 62399120B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-20mm-with-bolt-din-912-a2-70-type-b2-sku-62399120b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 20mm with bolt DIN 912 A2-70 type B1 SKU: 62399120B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-20mm-with-bolt-din-912-a2-70-type-b1-sku-62399120b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 20mm with bolt DIN 912 A2-70 SKU: 62399120](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-20mm-with-bolt-din-912-a2-70-sku-62399120/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 19mm with bolt DIN 912 A2-70 SKU: 62399119](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-19mm-with-bolt-din-912-a2-70-sku-62399119/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 18mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62399118K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-18mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62399118k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 18mm with bolt DIN 912 A2-70 type GR SKU: 62399118GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-18mm-with-bolt-din-912-a2-70-type-gr-sku-62399118gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 18mm with bolt DIN 912 A2-70 type GA SKU: 62399118GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-18mm-with-bolt-din-912-a2-70-type-ga-sku-62399118ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 18mm with bolt DIN 912 A2-70 type B2 SKU: 62399118B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-18mm-with-bolt-din-912-a2-70-type-b2-sku-62399118b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 18mm with bolt DIN 912 A2-70 type B1 SKU: 62399118B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-18mm-with-bolt-din-912-a2-70-type-b1-sku-62399118b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 18mm with bolt DIN 912 A2-70 SKU: 62399118](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-18mm-with-bolt-din-912-a2-70-sku-62399118/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 17mm with bolt DIN 912 A2-70 SKU: 62399117](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-17mm-with-bolt-din-912-a2-70-sku-62399117/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 16mm with bolt DIN 912 A2-70 type S SKU: 62399116S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-16mm-with-bolt-din-912-a2-70-type-s-sku-62399116s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 16mm with bolt DIN 912 A2-70 type N SKU: 62399116N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-16mm-with-bolt-din-912-a2-70-type-n-sku-62399116n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 16mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62399116K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-16mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62399116k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 16mm with adjustable clamp lever M5 x 14 length 30mm type GRK SKU: 62399116GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-16mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-type-grk-sku-62399116grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 16mm with bolt DIN 912 A2-70 type GR SKU: 62399116GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-16mm-with-bolt-din-912-a2-70-type-gr-sku-62399116gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 16mm with bolt DIN 912 A2-70 type GA SKU: 62399116GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-16mm-with-bolt-din-912-a2-70-type-ga-sku-62399116ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 16mm with bolt DIN 912 A2-70 type B2 SKU: 62399116B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-16mm-with-bolt-din-912-a2-70-type-b2-sku-62399116b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 16mm with bolt DIN 912 A2-70 type B1 SKU: 62399116B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-16mm-with-bolt-din-912-a2-70-type-b1-sku-62399116b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 16mm with bolt DIN 912 A2-70 SKU: 62399116](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-16mm-with-bolt-din-912-a2-70-sku-62399116/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 15mm with bolt DIN 912 A2-70 type S SKU: 62399115S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-15mm-with-bolt-din-912-a2-70-type-s-sku-62399115s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 15mm with bolt DIN 912 A2-70 type N SKU: 62399115N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-15mm-with-bolt-din-912-a2-70-type-n-sku-62399115n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 15mm with adjustable clamp lever M5 x 14 length 30mm SKU: 62399115K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-15mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-sku-62399115k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 15mm with adjustable clamp lever M5 x 14 length 30mm type GRK SKU: 62399115GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-15mm-with-adjustable-clamp-lever-m5-x-14-length-30mm-type-grk-sku-62399115grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 15mm with bolt DIN 912 A2-70 type GR SKU: 62399115GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-15mm-with-bolt-din-912-a2-70-type-gr-sku-62399115gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 15mm with bolt DIN 912 A2-70 type GA SKU: 62399115GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-15mm-with-bolt-din-912-a2-70-type-ga-sku-62399115ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 15mm with bolt DIN 912 A2-70 type B2 SKU: 62399115B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-15mm-with-bolt-din-912-a2-70-type-b2-sku-62399115b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 15mm with bolt DIN 912 A2-70 type B1 SKU: 62399115B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-15mm-with-bolt-din-912-a2-70-type-b1-sku-62399115b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 15mm with bolt DIN 912 A2-70 SKU: 62399115](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-15mm-with-bolt-din-912-a2-70-sku-62399115/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 14mm with bolt DIN 912 A2-70 type S SKU: 62399114S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-14mm-with-bolt-din-912-a2-70-type-s-sku-62399114s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 14mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62399114K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-14mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62399114k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 14mm with bolt DIN 912 A2-70 type GR SKU: 62399114GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-14mm-with-bolt-din-912-a2-70-type-gr-sku-62399114gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 14mm with bolt DIN 912 A2-70 type GA SKU: 62399114GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-14mm-with-bolt-din-912-a2-70-type-ga-sku-62399114ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 14mm with bolt DIN 912 A2-70 type B2 SKU: 62399114B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-14mm-with-bolt-din-912-a2-70-type-b2-sku-62399114b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 14mm with bolt DIN 912 A2-70 type B1 SKU: 62399114B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-14mm-with-bolt-din-912-a2-70-type-b1-sku-62399114b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 14mm with bolt DIN 912 A2-70 SKU: 62399114](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-14mm-with-bolt-din-912-a2-70-sku-62399114/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 13mm with bolt DIN 912 A2-70 SKU: 62399113](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-13mm-with-bolt-din-912-a2-70-sku-62399113/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 12mm with bolt DIN 912 A2-70 type S SKU: 62399112S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-12mm-with-bolt-din-912-a2-70-type-s-sku-62399112s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 12mm with bolt DIN 912 A2-70 type N SKU: 62399112N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-12mm-with-bolt-din-912-a2-70-type-n-sku-62399112n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 12mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62399112K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-12mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62399112k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 12mm with adjustable clamp lever M4 x 12 length 30mm type GRK SKU: 62399112GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-12mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-type-grk-sku-62399112grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 12mm with bolt DIN 912 A2-70 type GR SKU: 62399112GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-12mm-with-bolt-din-912-a2-70-type-gr-sku-62399112gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 12mm with bolt DIN 912 A2-70 type GA SKU: 62399112GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-12mm-with-bolt-din-912-a2-70-type-ga-sku-62399112ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 12mm with bolt DIN 912 A2-70 type B2 SKU: 62399112B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-12mm-with-bolt-din-912-a2-70-type-b2-sku-62399112b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 12mm with bolt DIN 912 A2-70 type B1 SKU: 62399112B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-12mm-with-bolt-din-912-a2-70-type-b1-sku-62399112b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 12mm with bolt DIN 912 A2-70 SKU: 62399112](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-12mm-with-bolt-din-912-a2-70-sku-62399112/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 11mm with adjustable clamp lever M4 x 12 length 30mm SKU: 62399111K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-11mm-with-adjustable-clamp-lever-m4-x-12-length-30mm-sku-62399111k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 11mm with bolt DIN 912 A2-70 SKU: 62399111](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-11mm-with-bolt-din-912-a2-70-sku-62399111/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 10mm with bolt DIN 912 A2-70 type S SKU: 62399110S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-10mm-with-bolt-din-912-a2-70-type-s-sku-62399110s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 10mm with bolt DIN 912 A2-70 type N SKU: 62399110N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-10mm-with-bolt-din-912-a2-70-type-n-sku-62399110n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 10mm with adjustable clamp lever M3 x 10 length 22mm SKU: 62399110K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-10mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-sku-62399110k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 10mm with adjustable clamp lever M3 x 10 length 22mm type GRK SKU: 62399110GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-10mm-with-adjustable-clamp-lever-m3-x-10-length-22mm-type-grk-sku-62399110grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 10mm with bolt DIN 912 A2-70 type GR SKU: 62399110GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-10mm-with-bolt-din-912-a2-70-type-gr-sku-62399110gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 10mm with bolt DIN 912 A2-70 type GA SKU: 62399110GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-10mm-with-bolt-din-912-a2-70-type-ga-sku-62399110ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 10mm with bolt DIN 912 A2-70 type B2 SKU: 62399110B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-10mm-with-bolt-din-912-a2-70-type-b2-sku-62399110b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 10mm with bolt DIN 912 A2-70 type B1 SKU: 62399110B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-10mm-with-bolt-din-912-a2-70-type-b1-sku-62399110b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single split stainless steel 1.4305 bore 10mm with bolt DIN 912 A2-70 SKU: 62399110](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-10mm-with-bolt-din-912-a2-70-sku-62399110/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 9mm with bolt DIN 912 A2-70 SKU: 62399109](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-9mm-with-bolt-din-912-a2-70-sku-62399109/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 8mm with bolt DIN 912 A2-70 type S SKU: 62399108S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-8mm-with-bolt-din-912-a2-70-type-s-sku-62399108s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 8mm with bolt DIN 912 A2-70 type N SKU: 62399108N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-8mm-with-bolt-din-912-a2-70-type-n-sku-62399108n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Precision worm wheel centre distance 31mm i=7 28 teeth SKU: 32100700](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i7-28-teeth-sku-32100700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=5 30 teeth SKU: 32100500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i5-30-teeth-sku-32100500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=2.5 25 teeth SKU: 32100200](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i2-5-25-teeth-sku-32100200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=50 SKU: 32075000](https://maedler.in/product/precision-worm-centre-distance-25mm-i50-sku-32075000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=40 SKU: 32074000](https://maedler.in/product/precision-worm-centre-distance-25mm-i40-sku-32074000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=30 SKU: 32073000](https://maedler.in/product/precision-worm-centre-distance-25mm-i30-sku-32073000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=25 SKU: 32072500](https://maedler.in/product/precision-worm-centre-distance-25mm-i25-sku-32072500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=20 SKU: 32072000](https://maedler.in/product/precision-worm-centre-distance-25mm-i20-sku-32072000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=15 SKU: 32071500](https://maedler.in/product/precision-worm-centre-distance-25mm-i15-sku-32071500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=10 SKU: 32071000](https://maedler.in/product/precision-worm-centre-distance-25mm-i10-sku-32071000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=6.5 SKU: 32070600](https://maedler.in/product/precision-worm-centre-distance-25mm-i6-5-sku-32070600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=5 SKU: 32070500](https://maedler.in/product/precision-worm-centre-distance-25mm-i5-sku-32070500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 25mm i=4 SKU: 32070400](https://maedler.in/product/precision-worm-centre-distance-25mm-i4-sku-32070400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=50 50 teeth SKU: 32065000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i50-50-teeth-sku-32065000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=40 40 teeth SKU: 32064000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i40-40-teeth-sku-32064000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=30 30 teeth SKU: 32063000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i30-30-teeth-sku-32063000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=25 25 teeth SKU: 32062500](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i25-25-teeth-sku-32062500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=20 20 teeth SKU: 32062000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i20-20-teeth-sku-32062000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=15 30 teeth SKU: 32061500](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i15-30-teeth-sku-32061500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=10 20 teeth SKU: 32061000](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i10-20-teeth-sku-32061000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=6.5 26 teeh SKU: 32060600](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i6-5-26-teeh-sku-32060600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=5 20 teeth SKU: 32060500](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i5-20-teeth-sku-32060500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 25mm i=4 20 teeth SKU: 32060400](https://maedler.in/product/precision-worm-wheel-centre-distance-25mm-i4-20-teeth-sku-32060400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=40 SKU: 32044000](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i40-sku-32044000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=30 SKU: 32043000](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i30-sku-32043000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=21 SKU: 32042100](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i21-sku-32042100/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=10.5 SKU: 32041000](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i10-5-sku-32041000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=7 SKU: 32040700](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i7-sku-32040700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=4 SKU: 32040400](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i4-sku-32040400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 22.62mm i=3 SKU: 32040300](https://maedler.in/product/precision-worm-centre-distance-22-62mm-i3-sku-32040300/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=40 40 teeth SKU: 32034000](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i40-40-teeth-sku-32034000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=30 30 teeth SKU: 32033000](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i30-30-teeth-sku-32033000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=21 21 teeth SKU: 32032100](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i21-21-teeth-sku-32032100/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=10.5 21 teeth SKU: 32031000](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i10-5-21-teeth-sku-32031000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=7 21 teeth SKU: 32030700](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i7-21-teeth-sku-32030700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=4 20 teeth SKU: 32030400](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i4-20-teeth-sku-32030400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 22.62mm i=3 21 teeth SKU: 32030300](https://maedler.in/product/precision-worm-wheel-centre-distance-22-62mm-i3-21-teeth-sku-32030300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=80 SKU: 32018000](https://maedler.in/product/precision-worm-centre-distance-17mm-i80-sku-32018000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=75 SKU: 32017500](https://maedler.in/product/precision-worm-centre-distance-17mm-i75-sku-32017500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=60 SKU: 32016000](https://maedler.in/product/precision-worm-centre-distance-17mm-i60-sku-32016000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=50 SKU: 32015000](https://maedler.in/product/precision-worm-centre-distance-17mm-i50-sku-32015000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=40 SKU: 32014000](https://maedler.in/product/precision-worm-centre-distance-17mm-i40-sku-32014000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=30 SKU: 32013000](https://maedler.in/product/precision-worm-centre-distance-17mm-i30-sku-32013000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=25 SKU: 32012500](https://maedler.in/product/precision-worm-centre-distance-17mm-i25-sku-32012500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=15 SKU: 32011500](https://maedler.in/product/precision-worm-centre-distance-17mm-i15-sku-32011500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=10 SKU: 32011000](https://maedler.in/product/precision-worm-centre-distance-17mm-i10-sku-32011000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=9 SKU: 32010900](https://maedler.in/product/precision-worm-centre-distance-17mm-i9-sku-32010900/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=7 SKU: 32010700](https://maedler.in/product/precision-worm-centre-distance-17mm-i7-sku-32010700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=5 SKU: 32010500](https://maedler.in/product/precision-worm-centre-distance-17mm-i5-sku-32010500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=4.5 SKU: 32010400](https://maedler.in/product/precision-worm-centre-distance-17mm-i4-5-sku-32010400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 17mm i=2.25 SKU: 32010200](https://maedler.in/product/precision-worm-centre-distance-17mm-i2-25-sku-32010200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=80 80 teeth SKU: 32008000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i80-80-teeth-sku-32008000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=75 75 teeth SKU: 32007500](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i75-75-teeth-sku-32007500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=60 60 teeth SKU: 32006000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i60-60-teeth-sku-32006000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=50 50 teeth SKU: 32005000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i50-50-teeth-sku-32005000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=40 40 teeth SKU: 32004000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i40-40-teeth-sku-32004000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=30 30 teeth SKU: 32003000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i30-30-teeth-sku-32003000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=25 25 teeth SKU: 32002500](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i25-25-teeth-sku-32002500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=15 30 teeth SKU: 32001500](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i15-30-teeth-sku-32001500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=10 30 teeth SKU: 32001000](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i10-30-teeth-sku-32001000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=9 27 teeth SKU: 32000900](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i9-27-teeth-sku-32000900/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=7 21 teeth SKU: 32000700](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i7-21-teeth-sku-32000700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=5 30 teeth SKU: 32000500](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i5-30-teeth-sku-32000500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=4.5 27 teeth SKU: 32000400](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i4-5-27-teeth-sku-32000400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 17mm i=2.25 18 teeth SKU: 32000200](https://maedler.in/product/precision-worm-wheel-centre-distance-17mm-i2-25-18-teeth-sku-32000200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished, worm gear with helical gearing. ** Worm with 9 mm hub diametre only. *** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Worm wheel made of cast iron GG25 module 5 65 teeth single-thread right hand SKU: 31062600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-65-teeth-single-thread-right-hand-sku-31062600/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 52 teeth single-thread right hand SKU: 31062100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-52-teeth-single-thread-right-hand-sku-31062100/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 40 teeth single-thread right hand SKU: 31061800](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-40-teeth-single-thread-right-hand-sku-31061800/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 32 teeth single-thread right hand SKU: 31061400](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-32-teeth-single-thread-right-hand-sku-31061400/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 26 teeth single-thread right hand SKU: 31061100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-26-teeth-single-thread-right-hand-sku-31061100/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 5 16 teeth single-thread right hand SKU: 31060500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-5-16-teeth-single-thread-right-hand-sku-31060500/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized.Pressure angle 20°. Efficiency: approx. 0,49. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 26 teeth double-thread right hand SKU: 31051100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-26-teeth-double-thread-right-hand-sku-31051100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,67. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 20 teeth double-thread right hand SKU: 31050700](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-20-teeth-double-thread-right-hand-sku-31050700/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,67. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 16 teeth double-thread right hand SKU: 31050500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-16-teeth-double-thread-right-hand-sku-31050500/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,67. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 65 teeth single-thread right hand SKU: 31032600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-65-teeth-single-thread-right-hand-sku-31032600/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 52 teeth single-thread right hand SKU: 31032100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-52-teeth-single-thread-right-hand-sku-31032100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 40 teeth single-thread right hand SKU: 31031800](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-40-teeth-single-thread-right-hand-sku-31031800/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 32 teeth single-thread right hand SKU: 31031400](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-32-teeth-single-thread-right-hand-sku-31031400/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 26 teeth single-thread right hand SKU: 31031100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-26-teeth-single-thread-right-hand-sku-31031100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 20 teeth single-thread right hand SKU: 31030700](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-20-teeth-single-thread-right-hand-sku-31030700/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 18 teeth single-thread right hand SKU: 31030600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-18-teeth-single-thread-right-hand-sku-31030600/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 4 16 teeth single-thread right hand SKU: 31030500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-4-16-teeth-single-thread-right-hand-sku-31030500/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Single-thread worm gears to be paired with single-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,48. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 65 teeth double-thread right hand SKU: 31022600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-65-teeth-double-thread-right-hand-sku-31022600/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 52 teeth double-thread right hand SKU: 31022100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-52-teeth-double-thread-right-hand-sku-31022100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 32 teeth double-thread right hand SKU: 31021400](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-32-teeth-double-thread-right-hand-sku-31021400/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 26 teeth double-thread right hand SKU: 31021100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-26-teeth-double-thread-right-hand-sku-31021100/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 20 teeth double-thread right hand SKU: 31020700](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-20-teeth-double-thread-right-hand-sku-31020700/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 16 teeth double-thread right hand SKU: 31020500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-16-teeth-double-thread-right-hand-sku-31020500/): Material: GG25, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 65 teeth single-thread right hand SKU: 31002600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-65-teeth-single-thread-right-hand-sku-31002600/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 52 teeth single-thread right hand SKU: 31002100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-52-teeth-single-thread-right-hand-sku-31002100/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 40 teeth single-thread right hand SKU: 31001800](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-40-teeth-single-thread-right-hand-sku-31001800/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 32 teeth single-thread right hand SKU: 31001400](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-32-teeth-single-thread-right-hand-sku-31001400/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 26 teeth single-thread right hand SKU: 31001100](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-26-teeth-single-thread-right-hand-sku-31001100/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 20 teeth single-thread right hand SKU: 31000700](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-20-teeth-single-thread-right-hand-sku-31000700/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 18 teeth single-thread right hand SKU: 31000600](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-18-teeth-single-thread-right-hand-sku-31000600/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of cast iron GG25 module 3 16 teeth single-thread right hand SKU: 31000500](https://maedler.in/product/worm-wheel-made-of-cast-iron-gg25-module-3-16-teeth-single-thread-right-hand-sku-31000500/): Material: GG25, with milled out, hollow teeth.With double-sided hub. Single-thread worm gears to be paired with single-thread worms.If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,46. Not self-locking. - [Worm wheel made of bronze module 2 60 teeth double-thread right hand SKU: 30152400](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-60-teeth-double-thread-right-hand-sku-30152400/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 50 teeth double-thread right hand SKU: 30152000](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-50-teeth-double-thread-right-hand-sku-30152000/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 40 teeth double-thread right hand SKU: 30151800](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-40-teeth-double-thread-right-hand-sku-30151800/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Worm wheel made of bronze module 2 30 teeth double-thread right hand SKU: 30151300](https://maedler.in/product/worm-wheel-made-of-bronze-module-2-30-teeth-double-thread-right-hand-sku-30151300/): Material: G-CuSn12, with milled out, hollow teeth. With double-sided hub. Double-thread worm gears to be paired with double-thread worms. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. Efficiency: approx. 0,66. Not self-locking. - [Clamp collar double-split stainless steel 1.4305 bore 10mm with bolts DIN 912 A2-70 type GR SKU: 62399410GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-10mm-with-bolts-din-912-a2-70-type-gr-sku-62399410gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 10mm with bolts DIN 912 A2-70 type GA SKU: 62399410GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-10mm-with-bolts-din-912-a2-70-type-ga-sku-62399410ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 10mm with bolts DIN 912 A2-70 type B2 SKU: 62399410B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-10mm-with-bolts-din-912-a2-70-type-b2-sku-62399410b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 10mm with bolts DIN 912 A2-70 type B1 SKU: 62399410B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-10mm-with-bolts-din-912-a2-70-type-b1-sku-62399410b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 10mm with bolts DIN 912 A2-70 SKU: 62399410](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-10mm-with-bolts-din-912-a2-70-sku-62399410/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 9mm with bolts DIN 912 A2-70 SKU: 62399409](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-9mm-with-bolts-din-912-a2-70-sku-62399409/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 8mm with bolts DIN 912 A2-70 type S SKU: 62399408S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-8mm-with-bolts-din-912-a2-70-type-s-sku-62399408s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 8mm with bolts DIN 912 A2-70 type N SKU: 62399408N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-8mm-with-bolts-din-912-a2-70-type-n-sku-62399408n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 8mm with bolts DIN 912 A2-70 SKU: 62399408](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-8mm-with-bolts-din-912-a2-70-sku-62399408/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 7mm with bolts DIN 912 A2-70 SKU: 62399407](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-7mm-with-bolts-din-912-a2-70-sku-62399407/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 6mm with bolts DIN 912 A2-70 type S SKU: 62399406S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-6mm-with-bolts-din-912-a2-70-type-s-sku-62399406s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 6mm with bolts DIN 912 A2-70 SKU: 62399406](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-6mm-with-bolts-din-912-a2-70-sku-62399406/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 5mm with bolts DIN 912 A2-70 type S SKU: 62399405S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-5mm-with-bolts-din-912-a2-70-type-s-sku-62399405s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 5mm with bolts DIN 912 A2-70 SKU: 62399405](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-5mm-with-bolts-din-912-a2-70-sku-62399405/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 4mm with bolts DIN 912 A2-70 SKU: 62399404](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-4mm-with-bolts-din-912-a2-70-sku-62399404/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 3mm with bolts DIN 912 A2-70 SKU: 62399403](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-3mm-with-bolts-din-912-a2-70-sku-62399403/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Shaft collar DIN703 bore 90mm 1.4305 set screw A2 inner hexagon SKU: 62399290](https://maedler.in/product/shaft-collar-din703-bore-90mm-1-4305-set-screw-a2-inner-hexagon-sku-62399290/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 85mm 1.4305 set screw A2 inner hexagon SKU: 62399285](https://maedler.in/product/shaft-collar-din703-bore-85mm-1-4305-set-screw-a2-inner-hexagon-sku-62399285/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 80mm 1.4305 set screw A2 inner hexagon SKU: 62399280](https://maedler.in/product/shaft-collar-din703-bore-80mm-1-4305-set-screw-a2-inner-hexagon-sku-62399280/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 75mm 1.4305 set screw A2 inner hexagon SKU: 62399275](https://maedler.in/product/shaft-collar-din703-bore-75mm-1-4305-set-screw-a2-inner-hexagon-sku-62399275/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 70mm 1.4305 set screw A2 inner hexagon SKU: 62399270](https://maedler.in/product/shaft-collar-din703-bore-70mm-1-4305-set-screw-a2-inner-hexagon-sku-62399270/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 65mm 1.4305 set screw A2 inner hexagon SKU: 62399265](https://maedler.in/product/shaft-collar-din703-bore-65mm-1-4305-set-screw-a2-inner-hexagon-sku-62399265/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 60mm 1.4305 set screw A2 inner hexagon SKU: 62399260](https://maedler.in/product/shaft-collar-din703-bore-60mm-1-4305-set-screw-a2-inner-hexagon-sku-62399260/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 55mm 1.4305 set screw A2 inner hexagon SKU: 62399255](https://maedler.in/product/shaft-collar-din703-bore-55mm-1-4305-set-screw-a2-inner-hexagon-sku-62399255/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 50mm 1.4305 set screw A2 inner hexagon SKU: 62399250](https://maedler.in/product/shaft-collar-din703-bore-50mm-1-4305-set-screw-a2-inner-hexagon-sku-62399250/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 45mm 1.4305 set screw A2 inner hexagon SKU: 62399245](https://maedler.in/product/shaft-collar-din703-bore-45mm-1-4305-set-screw-a2-inner-hexagon-sku-62399245/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 40mm 1.4305 set screw A2 inner hexagon SKU: 62399240](https://maedler.in/product/shaft-collar-din703-bore-40mm-1-4305-set-screw-a2-inner-hexagon-sku-62399240/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 35mm 1.4305 set screw A2 inner hexagon SKU: 62399235](https://maedler.in/product/shaft-collar-din703-bore-35mm-1-4305-set-screw-a2-inner-hexagon-sku-62399235/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 30mm 1.4305 set screw A2 inner hexagon SKU: 62399230](https://maedler.in/product/shaft-collar-din703-bore-30mm-1-4305-set-screw-a2-inner-hexagon-sku-62399230/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 25mm 1.4305 set screw A2 inner hexagon SKU: 62399225](https://maedler.in/product/shaft-collar-din703-bore-25mm-1-4305-set-screw-a2-inner-hexagon-sku-62399225/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Shaft collar DIN703 bore 20mm 1.4305 set screw A2 inner hexagon SKU: 62399220](https://maedler.in/product/shaft-collar-din703-bore-20mm-1-4305-set-screw-a2-inner-hexagon-sku-62399220/): Material: Stainless steel 1.4305 (AISI 303).Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.Bright turned and kalibrated. Bores tolerance H8.Large chamfer on one side of the outside diameter.Temperature range: -40ºC to +175ºC.Other sizes and inch-sizes on request. - [Clamp collar single-split stainless steel 1.4305 bore 100mm with bolt DIN 912 A2-70 SKU: 62399200](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-100mm-with-bolt-din-912-a2-70-sku-62399200/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 90mm with bolt DIN 912 A2-70 SKU: 62399190](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-90mm-with-bolt-din-912-a2-70-sku-62399190/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 80mm with bolt DIN 912 A2-70 SKU: 62399180](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-80mm-with-bolt-din-912-a2-70-sku-62399180/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 75mm with bolt DIN 912 A2-70 SKU: 62399175](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-75mm-with-bolt-din-912-a2-70-sku-62399175/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 70mm with bolt DIN 912 A2-70 SKU: 62399170](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-70mm-with-bolt-din-912-a2-70-sku-62399170/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 65mm with bolt DIN 912 A2-70 SKU: 62399165](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-65mm-with-bolt-din-912-a2-70-sku-62399165/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 60mm with bolt DIN 912 A2-70 type N SKU: 62399160N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-60mm-with-bolt-din-912-a2-70-type-n-sku-62399160n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 60mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62399160K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-60mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62399160k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 60mm with bolt DIN 912 A2-70 SKU: 62399160](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-60mm-with-bolt-din-912-a2-70-sku-62399160/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 55mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62399155K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-55mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62399155k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 55mm with bolt DIN 912 A2-70 SKU: 62399155](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-55mm-with-bolt-din-912-a2-70-sku-62399155/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 50mm with bolt DIN 912 A2-70 type N SKU: 62399150N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-50mm-with-bolt-din-912-a2-70-type-n-sku-62399150n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 50mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62399150K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-50mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62399150k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 50mm with adjustable clamp lever M8 x 25 length 78mm type GRK SKU: 62399150GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-50mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-type-grk-sku-62399150grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 50mm with bolt DIN 912 A2-70 type GR SKU: 62399150GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-50mm-with-bolt-din-912-a2-70-type-gr-sku-62399150gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 50mm with bolt DIN 912 A2-70 type GA SKU: 62399150GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-50mm-with-bolt-din-912-a2-70-type-ga-sku-62399150ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 50mm with bolt DIN 912 A2-70 type B2 SKU: 62399150B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-50mm-with-bolt-din-912-a2-70-type-b2-sku-62399150b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 50mm with bolt DIN 912 A2-70 type B1 SKU: 62399150B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-50mm-with-bolt-din-912-a2-70-type-b1-sku-62399150b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 50mm with bolt DIN 912 A2-70 SKU: 62399150](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-50mm-with-bolt-din-912-a2-70-sku-62399150/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 48mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62399148K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-48mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62399148k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 48mm with bolt DIN 912 A2-70 SKU: 62399148](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-48mm-with-bolt-din-912-a2-70-sku-62399148/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 45mm with bolt DIN 912 A2-70 type N SKU: 62399145N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-45mm-with-bolt-din-912-a2-70-type-n-sku-62399145n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 45mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62399145K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-45mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62399145k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 45mm with adjustable clamp lever M8 x 25 length 78mm type GRK SKU: 62399145GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-45mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-type-grk-sku-62399145grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 45mm with bolt DIN 912 A2-70 type GR SKU: 62399145GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-45mm-with-bolt-din-912-a2-70-type-gr-sku-62399145gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 45mm with bolt DIN 912 A2-70 type GA SKU: 62399145GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-45mm-with-bolt-din-912-a2-70-type-ga-sku-62399145ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 45mm with bolt DIN 912 A2-70 type B2 SKU: 62399145B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-45mm-with-bolt-din-912-a2-70-type-b2-sku-62399145b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 45mm with bolt DIN 912 A2-70 type B1 SKU: 62399145B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-45mm-with-bolt-din-912-a2-70-type-b1-sku-62399145b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 45mm with bolt DIN 912 A2-70 SKU: 62399145](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-45mm-with-bolt-din-912-a2-70-sku-62399145/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 42mm with adjustable clamp lever M8 x 25 length 78mm SKU: 62399142K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-42mm-with-adjustable-clamp-lever-m8-x-25-length-78mm-sku-62399142k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 42mm with bolt DIN 912 A2-70 SKU: 62399142](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-42mm-with-bolt-din-912-a2-70-sku-62399142/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 40mm with bolt DIN 912 A2-70 type S SKU: 62399140S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-40mm-with-bolt-din-912-a2-70-type-s-sku-62399140s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 40mm with bolt DIN 912 A2-70 type N SKU: 62399140N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-40mm-with-bolt-din-912-a2-70-type-n-sku-62399140n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 40mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62399140K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-40mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62399140k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 40mm with adjustable clamp lever M6 x 18 length 45mm type GRK SKU: 62399140GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-40mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-type-grk-sku-62399140grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 40mm with bolt DIN 912 A2-70 type GR SKU: 62399140GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-40mm-with-bolt-din-912-a2-70-type-gr-sku-62399140gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 40mm with bolt DIN 912 A2-70 type GA SKU: 62399140GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-40mm-with-bolt-din-912-a2-70-type-ga-sku-62399140ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 40mm with bolt DIN 912 A2-70 type B2 SKU: 62399140B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-40mm-with-bolt-din-912-a2-70-type-b2-sku-62399140b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 40mm with bolt DIN 912 A2-70 type B1 SKU: 62399140B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-40mm-with-bolt-din-912-a2-70-type-b1-sku-62399140b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 40mm with bolt DIN 912 A2-70 SKU: 62399140](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-40mm-with-bolt-din-912-a2-70-sku-62399140/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 38mm with bolt DIN 912 A2-70 type S SKU: 62399138S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-38mm-with-bolt-din-912-a2-70-type-s-sku-62399138s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 38mm with bolt DIN 912 A2-70 type N SKU: 62399138N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-38mm-with-bolt-din-912-a2-70-type-n-sku-62399138n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 38mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62399138K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-38mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62399138k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 38mm with bolt DIN 912 A2-70 type GR SKU: 62399138GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-38mm-with-bolt-din-912-a2-70-type-gr-sku-62399138gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 38mm with bolt DIN 912 A2-70 type GA SKU: 62399138GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-38mm-with-bolt-din-912-a2-70-type-ga-sku-62399138ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 38mm with bolt DIN 912 A2-70 type B2 SKU: 62399138B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-38mm-with-bolt-din-912-a2-70-type-b2-sku-62399138b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 38mm with bolt DIN 912 A2-70 type B1 SKU: 62399138B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-38mm-with-bolt-din-912-a2-70-type-b1-sku-62399138b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 38mm with bolt DIN 912 A2-70 SKU: 62399138](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-38mm-with-bolt-din-912-a2-70-sku-62399138/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 36mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62399136K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-36mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62399136k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 36mm with bolt DIN 912 A2-70 SKU: 62399136](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-36mm-with-bolt-din-912-a2-70-sku-62399136/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 35mm with bolt DIN 912 A2-70 type S SKU: 62399135S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-35mm-with-bolt-din-912-a2-70-type-s-sku-62399135s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 35mm with bolt DIN 912 A2-70 type N SKU: 62399135N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-35mm-with-bolt-din-912-a2-70-type-n-sku-62399135n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 35mm with adjustable clamp lever M6 x 18 length 45mm SKU: 62399135K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-35mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-sku-62399135k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 35mm with adjustable clamp lever M6 x 18 length 45mm type GRK SKU: 62399135GRK](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-35mm-with-adjustable-clamp-lever-m6-x-18-length-45mm-type-grk-sku-62399135grk/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Type GRK: With mounting flat and two radial monting bores, with thread.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools. - [Clamp collar single-split stainless steel 1.4305 bore 35mm with bolt DIN 912 A2-70 type GR SKU: 62399135GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-35mm-with-bolt-din-912-a2-70-type-gr-sku-62399135gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 35mm with bolt DIN 912 A2-70 type GA SKU: 62399135GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-35mm-with-bolt-din-912-a2-70-type-ga-sku-62399135ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 35mm with bolt DIN 912 A2-70 type B2 SKU: 62399135B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-35mm-with-bolt-din-912-a2-70-type-b2-sku-62399135b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 35mm with bolt DIN 912 A2-70 type B1 SKU: 62399135B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-35mm-with-bolt-din-912-a2-70-type-b1-sku-62399135b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 35mm with bolt DIN 912 A2-70 SKU: 62399135](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-35mm-with-bolt-din-912-a2-70-sku-62399135/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 34mm with bolt DIN 912 A2-70 SKU: 62399134](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-34mm-with-bolt-din-912-a2-70-sku-62399134/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 32mm with bolt DIN 912 A2-70 type S SKU: 62399132S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-32mm-with-bolt-din-912-a2-70-type-s-sku-62399132s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 32mm with adjustable clamp lever M6 x 16 length 45mm SKU: 62399132K](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-32mm-with-adjustable-clamp-lever-m6-x-16-length-45mm-sku-62399132k/): Material: Stainless steel 1.4305 (AISI 303). Handle: Zinc die-cast, plastic coated, black. Screw: Stainless steel 1.4305 (AISI 303).Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores.The disengageable, adjustable clamping lever enables an easy readjustment without tools.Tolerance b: +0.08 mm / -0.25 mm. Temperature resistant up to +90ºC. - [Clamp collar single-split stainless steel 1.4305 bore 32mm with bolt DIN 912 A2-70 type GR SKU: 62399132GR](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-32mm-with-bolt-din-912-a2-70-type-gr-sku-62399132gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 32mm with bolt DIN 912 A2-70 type GA SKU: 62399132GA](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-32mm-with-bolt-din-912-a2-70-type-ga-sku-62399132ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 32mm with bolt DIN 912 A2-70 type B2 SKU: 62399132B2](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-32mm-with-bolt-din-912-a2-70-type-b2-sku-62399132b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 32mm with bolt DIN 912 A2-70 type B1 SKU: 62399132B1](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-32mm-with-bolt-din-912-a2-70-type-b1-sku-62399132b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces,easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 32mm with bolt DIN 912 A2-70 SKU: 62399132](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-32mm-with-bolt-din-912-a2-70-sku-62399132/): Material: Stainless steel 1.4305 (AISI 303). Screw stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split stainless steel 1.4305 bore 30mm with bolt DIN 912 A2-70 type S SKU: 62399130S](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-30mm-with-bolt-din-912-a2-70-type-s-sku-62399130s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar single-split stainless steel 1.4305 bore 30mm with bolt DIN 912 A2-70 type N SKU: 62399130N](https://maedler.in/product/clamp-collar-single-split-stainless-steel-1-4305-bore-30mm-with-bolt-din-912-a2-70-type-n-sku-62399130n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Precision worm centre distance 35mm i=7.25 SKU: 32210700](https://maedler.in/product/precision-worm-centre-distance-35mm-i7-25-sku-32210700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=5 SKU: 32210500](https://maedler.in/product/precision-worm-centre-distance-35mm-i5-sku-32210500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=2.78 SKU: 32210200](https://maedler.in/product/precision-worm-centre-distance-35mm-i2-78-sku-32210200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=90 90 teeth SKU: 32209000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i90-90-teeth-sku-32209000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=58 58 teeth SKU: 32205800](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i58-58-teeth-sku-32205800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=50 50 teeth SKU: 32205000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i50-50-teeth-sku-32205000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=40 40 teeth SKU: 32204000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i40-40-teeth-sku-32204000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=30 30 teeth SKU: 32203000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i30-30-teeth-sku-32203000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=25 50 teeth SKU: 32202500](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i25-50-teeth-sku-32202500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=20 40 teeth SKU: 32202000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i20-40-teeth-sku-32202000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=15 30 teeth SKU: 32201500](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i15-30-teeth-sku-32201500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=12 24 teeth SKU: 32201200](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i12-24-teeth-sku-32201200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=10 30 teeth SKU: 32201000](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i10-30-teeth-sku-32201000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=8 24 teeth SKU: 32200800](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i8-24-teeth-sku-32200800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=7.25 29 teeth SKU: 32200700](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i7-25-29-teeth-sku-32200700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=5 25 teeth SKU: 32200500](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i5-25-teeth-sku-32200500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 35mm i=2.78 25 teeth SKU: 32200200](https://maedler.in/product/precision-worm-wheel-centre-distance-35mm-i2-78-25-teeth-sku-32200200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=75 SKU: 32147500](https://maedler.in/product/precision-worm-centre-distance-33mm-i75-sku-32147500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=56 SKU: 32145600](https://maedler.in/product/precision-worm-centre-distance-33mm-i56-sku-32145600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=50 SKU: 32145000](https://maedler.in/product/precision-worm-centre-distance-33mm-i50-sku-32145000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=38 SKU: 32143800](https://maedler.in/product/precision-worm-centre-distance-33mm-i38-sku-32143800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=32 SKU: 32143200](https://maedler.in/product/precision-worm-centre-distance-33mm-i32-sku-32143200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=30 SKU: 32143000](https://maedler.in/product/precision-worm-centre-distance-33mm-i30-sku-32143000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=28 SKU: 32142800](https://maedler.in/product/precision-worm-centre-distance-33mm-i28-sku-32142800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=24 SKU: 32142400](https://maedler.in/product/precision-worm-centre-distance-33mm-i24-sku-32142400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=20 SKU: 32142000](https://maedler.in/product/precision-worm-centre-distance-33mm-i20-sku-32142000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=18 SKU: 32141800](https://maedler.in/product/precision-worm-centre-distance-33mm-i18-sku-32141800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=17 SKU: 32141700](https://maedler.in/product/precision-worm-centre-distance-33mm-i17-sku-32141700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=16 SKU: 32141600](https://maedler.in/product/precision-worm-centre-distance-33mm-i16-sku-32141600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=15 SKU: 32141500](https://maedler.in/product/precision-worm-centre-distance-33mm-i15-sku-32141500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=14 SKU: 32141400](https://maedler.in/product/precision-worm-centre-distance-33mm-i14-sku-32141400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=12 SKU: 32141200](https://maedler.in/product/precision-worm-centre-distance-33mm-i12-sku-32141200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=10 SKU: 32141000](https://maedler.in/product/precision-worm-centre-distance-33mm-i10-sku-32141000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=7 SKU: 32140700](https://maedler.in/product/precision-worm-centre-distance-33mm-i7-sku-32140700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=5 SKU: 32140500](https://maedler.in/product/precision-worm-centre-distance-33mm-i5-sku-32140500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 33mm i=3.5 SKU: 32140300](https://maedler.in/product/precision-worm-centre-distance-33mm-i3-5-sku-32140300/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=75 75 teeth SKU: 32137500](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i75-75-teeth-sku-32137500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=56 56 teeth SKU: 32135600](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i56-56-teeth-sku-32135600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=50 50 teeth SKU: 32135000](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i50-50-teeth-sku-32135000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=38 38 teeth SKU: 32133800](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i38-38-teeth-sku-32133800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=32 32 teeth SKU: 32133200](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i32-32-teeth-sku-32133200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=30 30 teeth SKU: 32133000](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i30-30-teeth-sku-32133000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=28 28 teeth SKU: 32132800](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i28-28-teeth-sku-32132800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=24 24 teeth SKU: 32132400](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i24-24-teeth-sku-32132400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=20 40 teeth SKU: 32132000](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i20-40-teeth-sku-32132000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=18 36 teeth SKU: 32131800](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i18-36-teeth-sku-32131800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=17 34 teeth SKU: 32131700](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i17-34-teeth-sku-32131700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=16 32 teeth SKU: 32131600](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i16-32-teeth-sku-32131600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=15 30 teeth SKU: 32131500](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i15-30-teeth-sku-32131500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=14 28 teeth SKU: 32131400](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i14-28-teeth-sku-32131400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=12 24 teeth SKU: 32131200](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i12-24-teeth-sku-32131200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=10 30 teeth SKU: 32131000](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i10-30-teeth-sku-32131000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=7 28 teeth SKU: 32130700](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i7-28-teeth-sku-32130700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=5 20 teeth SKU: 32130500](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i5-20-teeth-sku-32130500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 33mm i=3.5 21 teeth SKU: 32130300](https://maedler.in/product/precision-worm-wheel-centre-distance-33mm-i3-5-21-teeth-sku-32130300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=100 SKU: 32120000](https://maedler.in/product/precision-worm-centre-distance-31mm-i100-sku-32120000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=90 SKU: 32119000](https://maedler.in/product/precision-worm-centre-distance-31mm-i90-sku-32119000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=75 SKU: 32117500](https://maedler.in/product/precision-worm-centre-distance-31mm-i75-sku-32117500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=70 SKU: 32117000](https://maedler.in/product/precision-worm-centre-distance-31mm-i70-sku-32117000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=60 SKU: 32116000](https://maedler.in/product/precision-worm-centre-distance-31mm-i60-sku-32116000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=55 SKU: 32115500](https://maedler.in/product/precision-worm-centre-distance-31mm-i55-sku-32115500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=50 SKU: 32115000](https://maedler.in/product/precision-worm-centre-distance-31mm-i50-sku-32115000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=45 SKU: 32114500](https://maedler.in/product/precision-worm-centre-distance-31mm-i45-sku-32114500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=38 SKU: 32113800](https://maedler.in/product/precision-worm-centre-distance-31mm-i38-sku-32113800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=30 SKU: 32113000](https://maedler.in/product/precision-worm-centre-distance-31mm-i30-sku-32113000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=28 SKU: 32112800](https://maedler.in/product/precision-worm-centre-distance-31mm-i28-sku-32112800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=25 SKU: 32112500](https://maedler.in/product/precision-worm-centre-distance-31mm-i25-sku-32112500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=24 SKU: 32112400](https://maedler.in/product/precision-worm-centre-distance-31mm-i24-sku-32112400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=23 SKU: 32112300](https://maedler.in/product/precision-worm-centre-distance-31mm-i23-sku-32112300/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=22 SKU: 32112200](https://maedler.in/product/precision-worm-centre-distance-31mm-i22-sku-32112200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=20 SKU: 32112000](https://maedler.in/product/precision-worm-centre-distance-31mm-i20-sku-32112000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=18 SKU: 32111800](https://maedler.in/product/precision-worm-centre-distance-31mm-i18-sku-32111800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=15 SKU: 32111500](https://maedler.in/product/precision-worm-centre-distance-31mm-i15-sku-32111500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=12 SKU: 32111200](https://maedler.in/product/precision-worm-centre-distance-31mm-i12-sku-32111200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=10 SKU: 32111000](https://maedler.in/product/precision-worm-centre-distance-31mm-i10-sku-32111000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=8.33 SKU: 32110800](https://maedler.in/product/precision-worm-centre-distance-31mm-i8-33-sku-32110800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=7 SKU: 32110700](https://maedler.in/product/precision-worm-centre-distance-31mm-i7-sku-32110700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=5 SKU: 32110500](https://maedler.in/product/precision-worm-centre-distance-31mm-i5-sku-32110500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 31mm i=2.5 SKU: 32110200](https://maedler.in/product/precision-worm-centre-distance-31mm-i2-5-sku-32110200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=100 100 teeth SKU: 32110000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i100-100-teeth-sku-32110000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=90 90 teeth SKU: 32109000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i90-90-teeth-sku-32109000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=75 75 teeth SKU: 32107500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i75-75-teeth-sku-32107500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=70 70 teeth SKU: 32107000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i70-70-teeth-sku-32107000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=60 60 teeth SKU: 32106000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i60-60-teeth-sku-32106000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=55 55 teeth SKU: 32105500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i55-55-teeth-sku-32105500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=50 50 teeth SKU: 32105000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i50-50-teeth-sku-32105000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=45 45 teeth SKU: 32104500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i45-45-teeth-sku-32104500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=38 38 teeth SKU: 32103800](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i38-38-teeth-sku-32103800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=30 30 teeth SKU: 32103000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i30-30-teeth-sku-32103000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=28 28 teeth SKU: 32102800](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i28-28-teeth-sku-32102800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=25 25 teeth SKU: 32102500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i25-25-teeth-sku-32102500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=24 24 teeth SKU: 32102400](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i24-24-teeth-sku-32102400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=23 23 teeth SKU: 32102300](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i23-23-teeth-sku-32102300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=22 44 teeth SKU: 32102200](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i22-44-teeth-sku-32102200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=20 60 teeth SKU: 32102000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i20-60-teeth-sku-32102000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=18 36 teeth SKU: 32101800](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i18-36-teeth-sku-32101800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=15 30 teeth SKU: 32101500](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i15-30-teeth-sku-32101500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=12 36 teeth SKU: 32101200](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i12-36-teeth-sku-32101200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=10 30 teeth SKU: 32101000](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i10-30-teeth-sku-32101000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 31mm i=8.33 25 teeth SKU: 32100800](https://maedler.in/product/precision-worm-wheel-centre-distance-31mm-i8-33-25-teeth-sku-32100800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Clamp collar double-split stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 type GA SKU: 62399440GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-40mm-with-bolts-din-912-a2-70-type-ga-sku-62399440ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 type B2 SKU: 62399440B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-40mm-with-bolts-din-912-a2-70-type-b2-sku-62399440b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 type B1 SKU: 62399440B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-40mm-with-bolts-din-912-a2-70-type-b1-sku-62399440b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 SKU: 62399440](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-40mm-with-bolts-din-912-a2-70-sku-62399440/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 38mm with bolts DIN 912 A2-70 type S SKU: 62399438S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-38mm-with-bolts-din-912-a2-70-type-s-sku-62399438s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 38mm with bolts DIN 912 A2-70 type N SKU: 62399438N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-38mm-with-bolts-din-912-a2-70-type-n-sku-62399438n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 38mm with bolts DIN 912 A2-70 type GR SKU: 62399438GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-38mm-with-bolts-din-912-a2-70-type-gr-sku-62399438gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 38mm with bolts DIN 912 A2-70 type GA SKU: 62399438GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-38mm-with-bolts-din-912-a2-70-type-ga-sku-62399438ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 38mm with bolts DIN 912 A2-70 type B2 SKU: 62399438B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-38mm-with-bolts-din-912-a2-70-type-b2-sku-62399438b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 38mm with bolts DIN 912 A2-70 type B1 SKU: 62399438B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-38mm-with-bolts-din-912-a2-70-type-b1-sku-62399438b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 38mm with bolts DIN 912 A2-70 SKU: 62399438](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-38mm-with-bolts-din-912-a2-70-sku-62399438/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 36mm with bolts DIN 912 A2-70 SKU: 62399436](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-36mm-with-bolts-din-912-a2-70-sku-62399436/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 35mm with bolts DIN 912 A2-70 type S SKU: 62399435S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-35mm-with-bolts-din-912-a2-70-type-s-sku-62399435s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 35mm with bolts DIN 912 A2-70 type N SKU: 62399435N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-35mm-with-bolts-din-912-a2-70-type-n-sku-62399435n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 35mm with bolts DIN 912 A2-70 type GR SKU: 62399435GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-35mm-with-bolts-din-912-a2-70-type-gr-sku-62399435gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 35mm with bolts DIN 912 A2-70 type GA SKU: 62399435GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-35mm-with-bolts-din-912-a2-70-type-ga-sku-62399435ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 35mm with bolts DIN 912 A2-70 type B2 SKU: 62399435B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-35mm-with-bolts-din-912-a2-70-type-b2-sku-62399435b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 35mm with bolts DIN 912 A2-70 type B1 SKU: 62399435B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-35mm-with-bolts-din-912-a2-70-type-b1-sku-62399435b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 35mm with bolts DIN 912 A2-70 SKU: 62399435](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-35mm-with-bolts-din-912-a2-70-sku-62399435/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 34mm with bolts DIN 912 A2-70 SKU: 62399434](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-34mm-with-bolts-din-912-a2-70-sku-62399434/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 32mm with bolts DIN 912 A2-70 type S SKU: 62399432S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-32mm-with-bolts-din-912-a2-70-type-s-sku-62399432s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 32mm with bolts DIN 912 A2-70 type GR SKU: 62399432GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-32mm-with-bolts-din-912-a2-70-type-gr-sku-62399432gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 32mm with bolts DIN 912 A2-70 type GA SKU: 62399432GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-32mm-with-bolts-din-912-a2-70-type-ga-sku-62399432ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 32mm with bolts DIN 912 A2-70 type B2 SKU: 62399432B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-32mm-with-bolts-din-912-a2-70-type-b2-sku-62399432b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 32mm with bolts DIN 912 A2-70 type B1 SKU: 62399432B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-32mm-with-bolts-din-912-a2-70-type-b1-sku-62399432b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 32mm with bolts DIN 912 A2-70 SKU: 62399432](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-32mm-with-bolts-din-912-a2-70-sku-62399432/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 30mm with bolts DIN 912 A2-70 type S SKU: 62399430S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-30mm-with-bolts-din-912-a2-70-type-s-sku-62399430s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 30mm with bolts DIN 912 A2-70 type N SKU: 62399430N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-30mm-with-bolts-din-912-a2-70-type-n-sku-62399430n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 30mm with bolts DIN 912 A2-70 type GR SKU: 62399430GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-30mm-with-bolts-din-912-a2-70-type-gr-sku-62399430gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 30mm with bolts DIN 912 A2-70 type GA SKU: 62399430GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-30mm-with-bolts-din-912-a2-70-type-ga-sku-62399430ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 30mm with bolts DIN 912 A2-70 type B2 SKU: 62399430B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-30mm-with-bolts-din-912-a2-70-type-b2-sku-62399430b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 30mm with bolts DIN 912 A2-70 type B1 SKU: 62399430B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-30mm-with-bolts-din-912-a2-70-type-b1-sku-62399430b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 30mm with bolts DIN 912 A2-70 SKU: 62399430](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-30mm-with-bolts-din-912-a2-70-sku-62399430/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 28mm with bolts DIN 912 A2-70 type GR SKU: 62399428GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-28mm-with-bolts-din-912-a2-70-type-gr-sku-62399428gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 28mm with bolts DIN 912 A2-70 type GA SKU: 62399428GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-28mm-with-bolts-din-912-a2-70-type-ga-sku-62399428ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 28mm with bolts DIN 912 A2-70 type B2 SKU: 62399428B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-28mm-with-bolts-din-912-a2-70-type-b2-sku-62399428b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 28mm with bolts DIN 912 A2-70 type B1 SKU: 62399428B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-28mm-with-bolts-din-912-a2-70-type-b1-sku-62399428b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 28mm with bolts DIN 912 A2-70 SKU: 62399428](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-28mm-with-bolts-din-912-a2-70-sku-62399428/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 26mm with bolts DIN 912 A2-70 SKU: 62399426](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-26mm-with-bolts-din-912-a2-70-sku-62399426/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 25mm with bolts DIN 912 A2-70 type S SKU: 62399425S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-25mm-with-bolts-din-912-a2-70-type-s-sku-62399425s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 25mm with bolts DIN 912 A2-70 type N SKU: 62399425N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-25mm-with-bolts-din-912-a2-70-type-n-sku-62399425n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 25mm with bolts DIN 912 A2-70 type GR SKU: 62399425GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-25mm-with-bolts-din-912-a2-70-type-gr-sku-62399425gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 25mm with bolts DIN 912 A2-70 type GA SKU: 62399425GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-25mm-with-bolts-din-912-a2-70-type-ga-sku-62399425ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 25mm with bolts DIN 912 A2-70 type B2 SKU: 62399425B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-25mm-with-bolts-din-912-a2-70-type-b2-sku-62399425b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 25mm with bolts DIN 912 A2-70 type B1 SKU: 62399425B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-25mm-with-bolts-din-912-a2-70-type-b1-sku-62399425b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 25mm with bolts DIN 912 A2-70 SKU: 62399425](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-25mm-with-bolts-din-912-a2-70-sku-62399425/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 24mm with bolts DIN 912 A2-70 type S SKU: 62399424S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-24mm-with-bolts-din-912-a2-70-type-s-sku-62399424s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 24mm with bolts DIN 912 A2-70 SKU: 62399424](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-24mm-with-bolts-din-912-a2-70-sku-62399424/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 23mm with bolts DIN 912 A2-70 SKU: 62399423](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-23mm-with-bolts-din-912-a2-70-sku-62399423/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 22mm with bolts DIN 912 A2-70 type GR SKU: 62399422GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-22mm-with-bolts-din-912-a2-70-type-gr-sku-62399422gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 22mm with bolts DIN 912 A2-70 type GA SKU: 62399422GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-22mm-with-bolts-din-912-a2-70-type-ga-sku-62399422ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 22mm with bolts DIN 912 A2-70 type B2 SKU: 62399422B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-22mm-with-bolts-din-912-a2-70-type-b2-sku-62399422b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 22mm with bolts DIN 912 A2-70 type B1 SKU: 62399422B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-22mm-with-bolts-din-912-a2-70-type-b1-sku-62399422b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 22mm with bolts DIN 912 A2-70 SKU: 62399422](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-22mm-with-bolts-din-912-a2-70-sku-62399422/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 21mm with bolts DIN 912 A2-70 SKU: 62399421](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-21mm-with-bolts-din-912-a2-70-sku-62399421/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type S SKU: 62399420S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-20mm-with-bolts-din-912-a2-70-type-s-sku-62399420s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type N SKU: 62399420N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-20mm-with-bolts-din-912-a2-70-type-n-sku-62399420n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type GR SKU: 62399420GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-20mm-with-bolts-din-912-a2-70-type-gr-sku-62399420gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type GA SKU: 62399420GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-20mm-with-bolts-din-912-a2-70-type-ga-sku-62399420ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type B2 SKU: 62399420B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-20mm-with-bolts-din-912-a2-70-type-b2-sku-62399420b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type B1 SKU: 62399420B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-20mm-with-bolts-din-912-a2-70-type-b1-sku-62399420b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 SKU: 62399420](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-20mm-with-bolts-din-912-a2-70-sku-62399420/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 19mm with bolts DIN 912 A2-70 SKU: 62399419](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-19mm-with-bolts-din-912-a2-70-sku-62399419/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 18mm with bolts DIN 912 A2-70 type GR SKU: 62399418GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-18mm-with-bolts-din-912-a2-70-type-gr-sku-62399418gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 18mm with bolts DIN 912 A2-70 type GA SKU: 62399418GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-18mm-with-bolts-din-912-a2-70-type-ga-sku-62399418ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 18mm with bolts DIN 912 A2-70 type B2 SKU: 62399418B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-18mm-with-bolts-din-912-a2-70-type-b2-sku-62399418b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 18mm with bolts DIN 912 A2-70 type B1 SKU: 62399418B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-18mm-with-bolts-din-912-a2-70-type-b1-sku-62399418b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 18mm with bolts DIN 912 A2-70 SKU: 62399418](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-18mm-with-bolts-din-912-a2-70-sku-62399418/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 17mm with bolts DIN 912 A2-70 SKU: 62399417](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-17mm-with-bolts-din-912-a2-70-sku-62399417/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type S SKU: 62399416S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-16mm-with-bolts-din-912-a2-70-type-s-sku-62399416s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type N SKU: 62399416N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-16mm-with-bolts-din-912-a2-70-type-n-sku-62399416n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type GR SKU: 62399416GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-16mm-with-bolts-din-912-a2-70-type-gr-sku-62399416gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type GA SKU: 62399416GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-16mm-with-bolts-din-912-a2-70-type-ga-sku-62399416ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type B2 SKU: 62399416B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-16mm-with-bolts-din-912-a2-70-type-b2-sku-62399416b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type B1 SKU: 62399416B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-16mm-with-bolts-din-912-a2-70-type-b1-sku-62399416b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 SKU: 62399416](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-16mm-with-bolts-din-912-a2-70-sku-62399416/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 15mm with bolts DIN 912 A2-70 type S SKU: 62399415S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-15mm-with-bolts-din-912-a2-70-type-s-sku-62399415s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 15mm with bolts DIN 912 A2-70 type N SKU: 62399415N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-15mm-with-bolts-din-912-a2-70-type-n-sku-62399415n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 15mm with bolts DIN 912 A2-70 type GR SKU: 62399415GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-15mm-with-bolts-din-912-a2-70-type-gr-sku-62399415gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 15mm with bolts DIN 912 A2-70 type GA SKU: 62399415GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-15mm-with-bolts-din-912-a2-70-type-ga-sku-62399415ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 15mm with bolts DIN 912 A2-70 type B2 SKU: 62399415B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-15mm-with-bolts-din-912-a2-70-type-b2-sku-62399415b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 15mm with bolts DIN 912 A2-70 type B1 SKU: 62399415B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-15mm-with-bolts-din-912-a2-70-type-b1-sku-62399415b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 15mm with bolts DIN 912 A2-70 SKU: 62399415](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-15mm-with-bolts-din-912-a2-70-sku-62399415/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 14mm with bolts DIN 912 A2-70 type S SKU: 62399414S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-14mm-with-bolts-din-912-a2-70-type-s-sku-62399414s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 14mm with bolts DIN 912 A2-70 type GR SKU: 62399414GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-14mm-with-bolts-din-912-a2-70-type-gr-sku-62399414gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 14mm with bolts DIN 912 A2-70 type GA SKU: 62399414GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-14mm-with-bolts-din-912-a2-70-type-ga-sku-62399414ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 14mm with bolts DIN 912 A2-70 type B2 SKU: 62399414B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-14mm-with-bolts-din-912-a2-70-type-b2-sku-62399414b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 14mm with bolts DIN 912 A2-70 type B1 SKU: 62399414B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-14mm-with-bolts-din-912-a2-70-type-b1-sku-62399414b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 14mm with bolts DIN 912 A2-70 SKU: 62399414](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-14mm-with-bolts-din-912-a2-70-sku-62399414/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 13mm with bolts DIN 912 A2-70 SKU: 62399413](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-13mm-with-bolts-din-912-a2-70-sku-62399413/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 12mm with bolts DIN 912 A2-70 type S SKU: 62399412S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-12mm-with-bolts-din-912-a2-70-type-s-sku-62399412s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 12mm with bolts DIN 912 A2-70 type N SKU: 62399412N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-12mm-with-bolts-din-912-a2-70-type-n-sku-62399412n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 12mm with bolts DIN 912 A2-70 type GR SKU: 62399412GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-12mm-with-bolts-din-912-a2-70-type-gr-sku-62399412gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 12mm with bolts DIN 912 A2-70 type GA SKU: 62399412GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-12mm-with-bolts-din-912-a2-70-type-ga-sku-62399412ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 12mm with bolts DIN 912 A2-70 type B2 SKU: 62399412B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-12mm-with-bolts-din-912-a2-70-type-b2-sku-62399412b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 12mm with bolts DIN 912 A2-70 type B1 SKU: 62399412B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-12mm-with-bolts-din-912-a2-70-type-b1-sku-62399412b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 12mm with bolts DIN 912 A2-70 SKU: 62399412](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-12mm-with-bolts-din-912-a2-70-sku-62399412/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 11mm with bolts DIN 912 A2-70 SKU: 62399411](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-11mm-with-bolts-din-912-a2-70-sku-62399411/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 10mm with bolts DIN 912 A2-70 type S SKU: 62399410S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-10mm-with-bolts-din-912-a2-70-type-s-sku-62399410s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 10mm with bolts DIN 912 A2-70 type N SKU: 62399410N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-10mm-with-bolts-din-912-a2-70-type-n-sku-62399410n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Precision worm centre distance 63mm i=34 SKU: 33043400](https://maedler.in/product/precision-worm-centre-distance-63mm-i34-sku-33043400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 63mm i=19 SKU: 33041900](https://maedler.in/product/precision-worm-centre-distance-63mm-i19-sku-33041900/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=70 70 teeth SKU: 33037000](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i70-70-teeth-sku-33037000/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=63 63 teeth SKU: 33036300](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i63-63-teeth-sku-33036300/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=48 48 teeth SKU: 33034800](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i48-48-teeth-sku-33034800/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=34 34 teeth SKU: 33033400](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i34-34-teeth-sku-33033400/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=26 26 teeth SKU: 33032600](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i26-26-teeth-sku-33032600/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=19 38 teeth SKU: 33031900](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i19-38-teeth-sku-33031900/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=12 36 teeth SKU: 33031200](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i12-36-teeth-sku-33031200/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 63mm i=6 24 teeth SKU: 33030600](https://maedler.in/product/precision-worm-wheel-centre-distance-63mm-i6-24-teeth-sku-33030600/): Material: Special brass CCuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=69 69 teeth SKU: 33006900](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i69-69-teeth-sku-33006900/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=55 55 teeth SKU: 33005500](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i55-55-teeth-sku-33005500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=46 46 teeth SKU: 33004600](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i46-46-teeth-sku-33004600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=35 35 teeth SKU: 33003500](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i35-35-teeth-sku-33003500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=27 27 teeth SKU: 33002700](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i27-27-teeth-sku-33002700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=23 23 teeth SKU: 33002300](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i23-23-teeth-sku-33002300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=19 19 teeth SKU: 33001900](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i19-19-teeth-sku-33001900/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=13.5 27 teeth SKU: 33001400](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i13-5-27-teeth-sku-33001400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=12 24 teeth SKU: 33001200](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i12-24-teeth-sku-33001200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=8.66 26 teeth SKU: 33000800](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i8-66-26-teeth-sku-33000800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=6 18 teeth SKU: 33000600](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i6-18-teeth-sku-33000600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 50mm i=4.25 17 teeth SKU: 33000400](https://maedler.in/product/precision-worm-wheel-centre-distance-50mm-i4-25-17-teeth-sku-33000400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 65mm i=75 same dimensions as A63 i=70 SKU: 32347500](https://maedler.in/product/precision-worm-centre-distance-65mm-i75-same-dimensions-as-a63-i70-sku-32347500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=75 75 teeth SKU: 32337500](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i75-75-teeth-sku-32337500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=66 66 teeth SKU: 32336600](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i66-66-teeth-sku-32336600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=50 50 teeth SKU: 32335000](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i50-50-teeth-sku-32335000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=28 28 teeth SKU: 32332800](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i28-28-teeth-sku-32332800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=12.66 38 teeth SKU: 32331200](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i12-66-38-teeth-sku-32331200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 65mm i=6.25 25 teeth SKU: 32330600](https://maedler.in/product/precision-worm-wheel-centre-distance-65mm-i6-25-25-teeth-sku-32330600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=75 same dimensions as A50 i=69 SKU: 32317500](https://maedler.in/product/precision-worm-centre-distance-53mm-i75-same-dimensions-as-a50-i69-sku-32317500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=60 same dimensions as A50 i=55 SKU: 32316000](https://maedler.in/product/precision-worm-centre-distance-53mm-i60-same-dimensions-as-a50-i55-sku-32316000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=50 same dimensions as A63 i=63 ; A65 i= 66 SKU: 32315000](https://maedler.in/product/precision-worm-centre-distance-53mm-i50-same-dimensions-as-a63-i63-a65-i-66-sku-32315000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=38 same dimensions as A63 i=48 ; A65 i=50 SKU: 32313800](https://maedler.in/product/precision-worm-centre-distance-53mm-i38-same-dimensions-as-a63-i48-a65-i50-sku-32313800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=30 same dimensions as A 50 i=27 SKU: 32313000](https://maedler.in/product/precision-worm-centre-distance-53mm-i30-same-dimensions-as-a-50-i27-sku-32313000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=28 SKU: 32312800](https://maedler.in/product/precision-worm-centre-distance-53mm-i28-sku-32312800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=25 same dimensions as A50 i=23 SKU: 32312500](https://maedler.in/product/precision-worm-centre-distance-53mm-i25-same-dimensions-as-a50-i23-sku-32312500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=21 same dimensions as A63 i=26 ; A65 i=28 SKU: 32312100](https://maedler.in/product/precision-worm-centre-distance-53mm-i21-same-dimensions-as-a63-i26-a65-i28-sku-32312100/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=15 same dimensions as A50 i=13.5 SKU: 32311500](https://maedler.in/product/precision-worm-centre-distance-53mm-i15-same-dimensions-as-a50-i13-5-sku-32311500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=13.5 same dimensions as A50 i=12 SKU: 32311300](https://maedler.in/product/precision-worm-centre-distance-53mm-i13-5-same-dimensions-as-a50-i12-sku-32311300/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=9.67 same dimensions as A63 i=12 ; A65 i=12,66 SKU: 32310900](https://maedler.in/product/precision-worm-centre-distance-53mm-i9-67-same-dimensions-as-a63-i12-a65-i1266-sku-32310900/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=6.67 same dimensions as A50 i=6 SKU: 32310600](https://maedler.in/product/precision-worm-centre-distance-53mm-i6-67-same-dimensions-as-a50-i6-sku-32310600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 53mm i=4.75 same dimensions as A63 i=6 ; A65 i=6.25 SKU: 32310400](https://maedler.in/product/precision-worm-centre-distance-53mm-i4-75-same-dimensions-as-a63-i6-a65-i6-25-sku-32310400/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=75 75 teeth SKU: 32307500](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i75-75-teeth-sku-32307500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=60 60 teeth SKU: 32306000](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i60-60-teeth-sku-32306000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=50 50 teeth SKU: 32305000](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i50-50-teeth-sku-32305000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=38 38 teeth SKU: 32303800](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i38-38-teeth-sku-32303800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=30 30 teeth SKU: 32303000](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i30-30-teeth-sku-32303000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=28 28 teeth SKU: 32302800](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i28-28-teeth-sku-32302800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=25 25 teeth SKU: 32302500](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i25-25-teeth-sku-32302500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=21 21 teeth SKU: 32302100](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i21-21-teeth-sku-32302100/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=15 30 teeth SKU: 32301500](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i15-30-teeth-sku-32301500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=13.5 27 teeth SKU: 32301300](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i13-5-27-teeth-sku-32301300/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=9.67 29 teeth SKU: 32300900](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i9-67-29-teeth-sku-32300900/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=6.67 20 teeth SKU: 32300600](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i6-67-20-teeth-sku-32300600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 53mm i=4.75 19 teeth SKU: 32300400](https://maedler.in/product/precision-worm-wheel-centre-distance-53mm-i4-75-19-teeth-sku-32300400/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. ** The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=80 SKU: 32248000](https://maedler.in/product/precision-worm-centre-distance-40mm-i80-sku-32248000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=75 SKU: 32247500](https://maedler.in/product/precision-worm-centre-distance-40mm-i75-sku-32247500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=70 SKU: 32247000](https://maedler.in/product/precision-worm-centre-distance-40mm-i70-sku-32247000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=60 SKU: 32246000](https://maedler.in/product/precision-worm-centre-distance-40mm-i60-sku-32246000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=56 SKU: 32245600](https://maedler.in/product/precision-worm-centre-distance-40mm-i56-sku-32245600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=50 SKU: 32245000](https://maedler.in/product/precision-worm-centre-distance-40mm-i50-sku-32245000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=40 SKU: 32244000](https://maedler.in/product/precision-worm-centre-distance-40mm-i40-sku-32244000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=35 SKU: 32243500](https://maedler.in/product/precision-worm-centre-distance-40mm-i35-sku-32243500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=30 SKU: 32243000](https://maedler.in/product/precision-worm-centre-distance-40mm-i30-sku-32243000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=28 SKU: 32242800](https://maedler.in/product/precision-worm-centre-distance-40mm-i28-sku-32242800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=25 SKU: 32242500](https://maedler.in/product/precision-worm-centre-distance-40mm-i25-sku-32242500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=20 SKU: 32242000](https://maedler.in/product/precision-worm-centre-distance-40mm-i20-sku-32242000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=15 SKU: 32241500](https://maedler.in/product/precision-worm-centre-distance-40mm-i15-sku-32241500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=12 SKU: 32241200](https://maedler.in/product/precision-worm-centre-distance-40mm-i12-sku-32241200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=10 SKU: 32241000](https://maedler.in/product/precision-worm-centre-distance-40mm-i10-sku-32241000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=8 SKU: 32240800](https://maedler.in/product/precision-worm-centre-distance-40mm-i8-sku-32240800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 40mm i=6,75 SKU: 32240600](https://maedler.in/product/precision-worm-centre-distance-40mm-i675-sku-32240600/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=80 80 teeth SKU: 32238000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i80-80-teeth-sku-32238000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=75 75 teeth SKU: 32237500](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i75-75-teeth-sku-32237500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=70 70 teeth SKU: 32237000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i70-70-teeth-sku-32237000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=60 60 teeth SKU: 32236000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i60-60-teeth-sku-32236000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=56 56 teeth SKU: 32235600](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i56-56-teeth-sku-32235600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=50 50 teeth SKU: 32235000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i50-50-teeth-sku-32235000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=40 40 teeth SKU: 32234000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i40-40-teeth-sku-32234000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=35 35 teeth SKU: 32233500](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i35-35-teeth-sku-32233500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=30 30 teeth SKU: 32233000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i30-30-teeth-sku-32233000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=28 28 teeth SKU: 32232800](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i28-28-teeth-sku-32232800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=25 50 teeth SKU: 32232500](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i25-50-teeth-sku-32232500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=20 40 teeth SKU: 32232000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i20-40-teeth-sku-32232000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=15 30 teeth SKU: 32231500](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i15-30-teeth-sku-32231500/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=12 36 teeth SKU: 32231200](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i12-36-teeth-sku-32231200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=10 30 teeth SKU: 32231000](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i10-30-teeth-sku-32231000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=8 24 teeth SKU: 32230800](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i8-24-teeth-sku-32230800/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 40mm i=6.75 27 teeth SKU: 32230600](https://maedler.in/product/precision-worm-wheel-centre-distance-40mm-i6-75-27-teeth-sku-32230600/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. Attention: Keyway not according to DIN. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * Worm only polished - worm gear with helical gearing. ** The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=90 SKU: 32219000](https://maedler.in/product/precision-worm-centre-distance-35mm-i90-sku-32219000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=58 SKU: 32215800](https://maedler.in/product/precision-worm-centre-distance-35mm-i58-sku-32215800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=50 SKU: 32215000](https://maedler.in/product/precision-worm-centre-distance-35mm-i50-sku-32215000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=40 SKU: 32214000](https://maedler.in/product/precision-worm-centre-distance-35mm-i40-sku-32214000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=30 SKU: 32213000](https://maedler.in/product/precision-worm-centre-distance-35mm-i30-sku-32213000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=25 SKU: 32212500](https://maedler.in/product/precision-worm-centre-distance-35mm-i25-sku-32212500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=20 SKU: 32212000](https://maedler.in/product/precision-worm-centre-distance-35mm-i20-sku-32212000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=15 SKU: 32211500](https://maedler.in/product/precision-worm-centre-distance-35mm-i15-sku-32211500/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=12 SKU: 32211200](https://maedler.in/product/precision-worm-centre-distance-35mm-i12-sku-32211200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=10 SKU: 32211000](https://maedler.in/product/precision-worm-centre-distance-35mm-i10-sku-32211000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 35mm i=8 SKU: 32210800](https://maedler.in/product/precision-worm-centre-distance-35mm-i8-sku-32210800/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Cylindrical bush slotted version 25 x 28 x 40 mm SKU: 62402540](https://maedler.in/product/cylindrical-bush-slotted-version-25-x-28-x-40-mm-sku-62402540/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 25 x 28 x 30 mm SKU: 62402530](https://maedler.in/product/cylindrical-bush-slotted-version-25-x-28-x-30-mm-sku-62402530/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 25 x 28 x 25 mm SKU: 62402525](https://maedler.in/product/cylindrical-bush-slotted-version-25-x-28-x-25-mm-sku-62402525/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 25 x 28 x 20 mm SKU: 62402520](https://maedler.in/product/cylindrical-bush-slotted-version-25-x-28-x-20-mm-sku-62402520/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 25 x 28 x 15 mm SKU: 62402515](https://maedler.in/product/cylindrical-bush-slotted-version-25-x-28-x-15-mm-sku-62402515/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 24 x 27 x 25 mm SKU: 62402425](https://maedler.in/product/cylindrical-bush-slotted-version-24-x-27-x-25-mm-sku-62402425/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 22 x 25 x 20 mm SKU: 62402220](https://maedler.in/product/cylindrical-bush-slotted-version-22-x-25-x-20-mm-sku-62402220/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 20 x 23 x 30 mm SKU: 62402030](https://maedler.in/product/cylindrical-bush-slotted-version-20-x-23-x-30-mm-sku-62402030/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 20 x 23 x 20 mm SKU: 62402020](https://maedler.in/product/cylindrical-bush-slotted-version-20-x-23-x-20-mm-sku-62402020/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 20 x 23 x 15 mm SKU: 62402015](https://maedler.in/product/cylindrical-bush-slotted-version-20-x-23-x-15-mm-sku-62402015/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 20 x 23 x 12 mm SKU: 62402012](https://maedler.in/product/cylindrical-bush-slotted-version-20-x-23-x-12-mm-sku-62402012/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 20 x 23 x 10 mm SKU: 62402010](https://maedler.in/product/cylindrical-bush-slotted-version-20-x-23-x-10-mm-sku-62402010/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 18 x 20 x 20 mm SKU: 62401820](https://maedler.in/product/cylindrical-bush-slotted-version-18-x-20-x-20-mm-sku-62401820/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 16 x 18 x 25 mm SKU: 62401625](https://maedler.in/product/cylindrical-bush-slotted-version-16-x-18-x-25-mm-sku-62401625/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 16 x 18 x 20 mm SKU: 62401620](https://maedler.in/product/cylindrical-bush-slotted-version-16-x-18-x-20-mm-sku-62401620/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 16 x 18 x 15 mm SKU: 62401615](https://maedler.in/product/cylindrical-bush-slotted-version-16-x-18-x-15-mm-sku-62401615-2/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 16 x 18 x 15 mm SKU: 62401615](https://maedler.in/product/cylindrical-bush-slotted-version-16-x-18-x-15-mm-sku-62401615/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 16 x 18 x 10 mm SKU: 62401610](https://maedler.in/product/cylindrical-bush-slotted-version-16-x-18-x-10-mm-sku-62401610/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 15 x 17 x 20 mm SKU: 62401520](https://maedler.in/product/cylindrical-bush-slotted-version-15-x-17-x-20-mm-sku-62401520/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 15 x 17 x 15 mm SKU: 62401515](https://maedler.in/product/cylindrical-bush-slotted-version-15-x-17-x-15-mm-sku-62401515/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 15 x 17 x 12 mm SKU: 62401512](https://maedler.in/product/cylindrical-bush-slotted-version-15-x-17-x-12-mm-sku-62401512/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 15 x 17 x 10 mm SKU: 62401510](https://maedler.in/product/cylindrical-bush-slotted-version-15-x-17-x-10-mm-sku-62401510/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 14 x 16 x 20 mm SKU: 62401420](https://maedler.in/product/cylindrical-bush-slotted-version-14-x-16-x-20-mm-sku-62401420/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 14 x 16 x 10 mm SKU: 62401410](https://maedler.in/product/cylindrical-bush-slotted-version-14-x-16-x-10-mm-sku-62401410/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 12 x 14 x 20 mm SKU: 62401220](https://maedler.in/product/cylindrical-bush-slotted-version-12-x-14-x-20-mm-sku-62401220/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 12 x 14 x 15 mm SKU: 62401215](https://maedler.in/product/cylindrical-bush-slotted-version-12-x-14-x-15-mm-sku-62401215/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 12 x 14 x 12 mm SKU: 62401212](https://maedler.in/product/cylindrical-bush-slotted-version-12-x-14-x-12-mm-sku-62401212/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 12 x 14 x 10 mm SKU: 62401210](https://maedler.in/product/cylindrical-bush-slotted-version-12-x-14-x-10-mm-sku-62401210/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 12 x 14 x 8 mm SKU: 62401208](https://maedler.in/product/cylindrical-bush-slotted-version-12-x-14-x-8-mm-sku-62401208/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 12 x 14 x 6 mm SKU: 62401206](https://maedler.in/product/cylindrical-bush-slotted-version-12-x-14-x-6-mm-sku-62401206/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 10 x 12 x 20 mm SKU: 62401020](https://maedler.in/product/cylindrical-bush-slotted-version-10-x-12-x-20-mm-sku-62401020/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 10 x 12 x 15 mm SKU: 62401015](https://maedler.in/product/cylindrical-bush-slotted-version-10-x-12-x-15-mm-sku-62401015/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 10 x 12 x 12 mm SKU: 62401012](https://maedler.in/product/cylindrical-bush-slotted-version-10-x-12-x-12-mm-sku-62401012/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 10 x 12 x 10 mm SKU: 62401010](https://maedler.in/product/cylindrical-bush-slotted-version-10-x-12-x-10-mm-sku-62401010/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 10 x 12 x 8 mm SKU: 62401008](https://maedler.in/product/cylindrical-bush-slotted-version-10-x-12-x-8-mm-sku-62401008/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 10 x 12 x 6 mm SKU: 62401006](https://maedler.in/product/cylindrical-bush-slotted-version-10-x-12-x-6-mm-sku-62401006/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 9 x 11 x 10 mm SKU: 62400910](https://maedler.in/product/cylindrical-bush-slotted-version-9-x-11-x-10-mm-sku-62400910/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 8 x 10 x 10 mm SKU: 62400810](https://maedler.in/product/cylindrical-bush-slotted-version-8-x-10-x-10-mm-sku-62400810/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 8 x 10 x 8 mm SKU: 62400808](https://maedler.in/product/cylindrical-bush-slotted-version-8-x-10-x-8-mm-sku-62400808/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 8 x 10 x 6 mm SKU: 62400806](https://maedler.in/product/cylindrical-bush-slotted-version-8-x-10-x-6-mm-sku-62400806/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 7 x 9,0 x 10 mm SKU: 62400710](https://maedler.in/product/cylindrical-bush-slotted-version-7-x-90-x-10-mm-sku-62400710/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 6 x 8,0 x 10 mm SKU: 62400610](https://maedler.in/product/cylindrical-bush-slotted-version-6-x-80-x-10-mm-sku-62400610/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 6 x 8,0 x 6 mm SKU: 62400606](https://maedler.in/product/cylindrical-bush-slotted-version-6-x-80-x-6-mm-sku-62400606/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 6 x 8,0 x 5 mm SKU: 62400605](https://maedler.in/product/cylindrical-bush-slotted-version-6-x-80-x-5-mm-sku-62400605/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 5 x 7,0 x 8 mm SKU: 62400508](https://maedler.in/product/cylindrical-bush-slotted-version-5-x-70-x-8-mm-sku-62400508/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 5 x 7,0 x 5 mm SKU: 62400505](https://maedler.in/product/cylindrical-bush-slotted-version-5-x-70-x-5-mm-sku-62400505/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 4 x 5,5 x 8 mm SKU: 62400408](https://maedler.in/product/cylindrical-bush-slotted-version-4-x-55-x-8-mm-sku-62400408/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 4 x 5,5 x 6 mm SKU: 62400406](https://maedler.in/product/cylindrical-bush-slotted-version-4-x-55-x-6-mm-sku-62400406/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 4 x 5,5 x 4 mm SKU: 62400404](https://maedler.in/product/cylindrical-bush-slotted-version-4-x-55-x-4-mm-sku-62400404/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 3 x 4,5 x 6 mm SKU: 62400306](https://maedler.in/product/cylindrical-bush-slotted-version-3-x-45-x-6-mm-sku-62400306/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 3 x 4,5 x 5 mm SKU: 62400305](https://maedler.in/product/cylindrical-bush-slotted-version-3-x-45-x-5-mm-sku-62400305/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 3 x 4,5 x 4 mm SKU: 62400304](https://maedler.in/product/cylindrical-bush-slotted-version-3-x-45-x-4-mm-sku-62400304/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [MAEDLER deep groove ball bearing single row inner diameter 4mm outer diameter 13mm width 5mm shielded on both sides SKU: 624-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-4mm-outer-diameter-13mm-width-5mm-shielded-on-both-sides-sku-624-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 4mm outer diameter 13mm width 5mm shielded on both sides clearance C3 SKU: 624-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-4mm-outer-diameter-13mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-624-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Clamp collar with thread double split stainless steel 1.4305 thread M30 x 3,5 with bolts DIN 912 A2-70 SKU: 62399930](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m30-x-35-with-bolts-din-912-a2-70-sku-62399930/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split stainless steel 1.4305 thread M24 x 3,0 with bolts DIN 912 A2-70 SKU: 62399924](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m24-x-30-with-bolts-din-912-a2-70-sku-62399924/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split stainless steel 1.4305 thread M20 x 2,5 with bolts DIN 912 A2-70 SKU: 62399920](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m20-x-25-with-bolts-din-912-a2-70-sku-62399920/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split stainless steel 1.4305 thread M16 x 2,0 with bolts DIN 912 A2-70 SKU: 62399916](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m16-x-20-with-bolts-din-912-a2-70-sku-62399916/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split stainless steel 1.4305 thread M12 x 1,75 with bolts DIN 912 A2-70 SKU: 62399912](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m12-x-175-with-bolts-din-912-a2-70-sku-62399912/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split stainless steel 1.4305 thread M10 x 1,5 with bolts DIN 912 A2-70 SKU: 62399910](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m10-x-15-with-bolts-din-912-a2-70-sku-62399910/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split stainless steel 1.4305 thread M8 x 1,25 with bolts DIN 912 A2-70 SKU: 62399908](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m8-x-125-with-bolts-din-912-a2-70-sku-62399908/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split stainless steel 1.4305 thread M6 x 1,0 with bolts DIN 912 A2-70 SKU: 62399906](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m6-x-10-with-bolts-din-912-a2-70-sku-62399906/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split stainless steel 1.4305 thread M5 x 0,8 with bolts DIN 912 A2-70 SKU: 62399905](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m5-x-08-with-bolts-din-912-a2-70-sku-62399905/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread double split stainless steel 1.4305 thread M4 x 0,7 with bolts DIN 912 A2-70 SKU: 62399904](https://maedler.in/product/clamp-collar-with-thread-double-split-stainless-steel-1-4305-thread-m4-x-07-with-bolts-din-912-a2-70-sku-62399904/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide.Tolerance b: +0,08mm / -0,25mmTemperature range: -40°C to +175°C.Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 30 x 3.50 with bolt DIN 912 A2-70 SKU: 62399630](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-30-x-3-50-with-bolt-din-912-a2-70-sku-62399630/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 24 x 3.00 with bolt DIN 912 A2-70 SKU: 62399624](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-24-x-3-00-with-bolt-din-912-a2-70-sku-62399624/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 20 x 2.50 with bolt DIN 912 A2-70 SKU: 62399620](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-20-x-2-50-with-bolt-din-912-a2-70-sku-62399620/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 16 x 2.00 with bolt DIN 912 A2-70 SKU: 62399616](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-16-x-2-00-with-bolt-din-912-a2-70-sku-62399616/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 12 x 1.75 with bolt DIN 912 A2-70 SKU: 62399612](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-12-x-1-75-with-bolt-din-912-a2-70-sku-62399612/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 10 x 1.50 with bolt DIN 912 A2-70 SKU: 62399610](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-10-x-1-50-with-bolt-din-912-a2-70-sku-62399610/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 8 x 1.25 with bolt DIN 912 A2-70 SKU: 62399608](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-8-x-1-25-with-bolt-din-912-a2-70-sku-62399608/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 6 x 1.00 with bolt DIN 912 A2-70 SKU: 62399606](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-6-x-1-00-with-bolt-din-912-a2-70-sku-62399606/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 5 x 0.80 with bolt DIN 912 A2-70 SKU: 62399605](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-5-x-0-80-with-bolt-din-912-a2-70-sku-62399605/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar with thread single split stainless steel 1.4305 thread M 4 x 0.70 with bolt DIN 912 A2-70 SKU: 62399604](https://maedler.in/product/clamp-collar-with-thread-single-split-stainless-steel-1-4305-thread-m-4-x-0-70-with-bolt-din-912-a2-70-sku-62399604/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.The threads of the screws DIN 912 are covered with a layer of polyamide. Temperature range: -40°C to +175°C.*Thread metric ISO-standard (column 1). - [Clamp collar double-split stainless steel 1.4305 bore 100mm with bolts DIN 912 A2-70 SKU: 62399500](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-100mm-with-bolts-din-912-a2-70-sku-62399500/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 90mm with bolts DIN 912 A2-70 SKU: 62399490](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-90mm-with-bolts-din-912-a2-70-sku-62399490/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 80mm with bolts DIN 912 A2-70 SKU: 62399480](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-80mm-with-bolts-din-912-a2-70-sku-62399480/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 75mm with bolts DIN 912 A2-70 SKU: 62399475](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-75mm-with-bolts-din-912-a2-70-sku-62399475/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 70mm with bolts DIN 912 A2-70 SKU: 62399470](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-70mm-with-bolts-din-912-a2-70-sku-62399470/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 65mm with bolts DIN 912 A2-70 SKU: 62399465](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-65mm-with-bolts-din-912-a2-70-sku-62399465/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 60mm with bolts DIN 912 A2-70 type N SKU: 62399460N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-60mm-with-bolts-din-912-a2-70-type-n-sku-62399460n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 60mm with bolts DIN 912 A2-70 SKU: 62399460](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-60mm-with-bolts-din-912-a2-70-sku-62399460/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 55mm with bolts DIN 912 A2-70 SKU: 62399455](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-55mm-with-bolts-din-912-a2-70-sku-62399455/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 50mm with bolts DIN 912 A2-70 type N SKU: 62399450N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-50mm-with-bolts-din-912-a2-70-type-n-sku-62399450n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 50mm with bolts DIN 912 A2-70 type GR SKU: 62399450GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-50mm-with-bolts-din-912-a2-70-type-gr-sku-62399450gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 50mm with bolts DIN 912 A2-70 type GA SKU: 62399450GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-50mm-with-bolts-din-912-a2-70-type-ga-sku-62399450ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 50mm with bolts DIN 912 A2-70 type B2 SKU: 62399450B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-50mm-with-bolts-din-912-a2-70-type-b2-sku-62399450b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 50mm with bolts DIN 912 A2-70 type B1 SKU: 62399450B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-50mm-with-bolts-din-912-a2-70-type-b1-sku-62399450b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 50mm with bolts DIN 912 A2-70 SKU: 62399450](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-50mm-with-bolts-din-912-a2-70-sku-62399450/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 48mm with bolts DIN 912 A2-70 SKU: 62399448](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-48mm-with-bolts-din-912-a2-70-sku-62399448/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 45mm with bolts DIN 912 A2-70 type N SKU: 62399445N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-45mm-with-bolts-din-912-a2-70-type-n-sku-62399445n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 45mm with bolts DIN 912 A2-70 type GR SKU: 62399445GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-45mm-with-bolts-din-912-a2-70-type-gr-sku-62399445gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 45mm with bolts DIN 912 A2-70 type GA SKU: 62399445GA](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-45mm-with-bolts-din-912-a2-70-type-ga-sku-62399445ga/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GA: With two axial mounting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 45mm with bolts DIN 912 A2-70 type B2 SKU: 62399445B2](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-45mm-with-bolts-din-912-a2-70-type-b2-sku-62399445b2/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 45mm with bolts DIN 912 A2-70 type B1 SKU: 62399445B1](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-45mm-with-bolts-din-912-a2-70-type-b1-sku-62399445b1/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ B1: With two axial mounting bores.Typ B2: With two axial mounting bores, with sunk holes for cylindrical cap screws DIN 912.The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC.* Fitting screw size for B1.** Fitting screw size for B2. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 45mm with bolts DIN 912 A2-70 SKU: 62399445](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-45mm-with-bolts-din-912-a2-70-sku-62399445/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 42mm with bolts DIN 912 A2-70 SKU: 62399442](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-42mm-with-bolts-din-912-a2-70-sku-62399442/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 type S SKU: 62399440S](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-40mm-with-bolts-din-912-a2-70-type-s-sku-62399440s/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ S: Slim version, e.g. for encoders. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 type N SKU: 62399440N](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-40mm-with-bolts-din-912-a2-70-type-n-sku-62399440n/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ N: with keyway DIN 6885-1. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Clamp collar double-split stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 type GR SKU: 62399440GR](https://maedler.in/product/clamp-collar-double-split-stainless-steel-1-4305-bore-40mm-with-bolts-din-912-a2-70-type-gr-sku-62399440gr/): Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70. Typ GR: With mounting flat and two radial monting bores, with thread. The thread of the screw DIN 912 is covered with a layer of polyamide.Tolerance b: +0.08mm / -0.25mm. Temperature range: -40ºC to +175ºC. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. - [Cranked chain link type 12 / L for roller chain similar to 10 B-1 NP pitch 5/8x3/8" nickel-plated SKU: 10666004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-10-b-1-np-pitch-5-8x3-8-nickel-plated-sku-10666004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 10 B-1 SKU: 10666003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-10-b-1-sku-10666003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 10 B-1 NP pitch 5/8x3/8" nickel-plated SKU: 10666003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-10-b-1-np-pitch-5-8x3-8-nickel-plated-sku-10666003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 10 B NP pitch 5/8x3/8" nickel-plated SKU: 10666001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-10-b-np-pitch-5-8x3-8-nickel-plated-sku-10666001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 10 B-1 pitch 5/8x3/8" SKU: 10600500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-10-b-1-pitch-5-8x3-8-sku-10600500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 10 B-1 pitch 5/8x3/8" SKU: 10600400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-10-b-1-pitch-5-8x3-8-sku-10600400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for roller chain DIN ISO 606 10 B-1-GL pitch 5/8x3/8"" with straight plates packing unit 5 pieces SKU: 10600300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-din-iso-606-10-b-1-gl-pitch-5-8x3-8-with-straight-plates-packing-unit-5-pieces-sku-10600300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain 10 B-1 pitch 5/8x3/8" packing unit 5 pieces SKU: 10600300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-10-b-1-pitch-5-8x3-8-packing-unit-5-pieces-sku-10600300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Chain link type 10/S for roller chain 10 B-1 pitch 5/8x3/8" SKU: 10600200](https://maedler.in/product/chain-link-type-10-s-for-roller-chain-10-b-1-pitch-5-8x3-8-sku-10600200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4/B for roller chain DIN ISO 606 10 B - GL pitch 5/8x3/8" with straight plates SKU: 10600100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-10-b-gl-pitch-5-8x3-8-with-straight-plates-sku-10600100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 10 B pitch 5/8x3/8" SKU: 10600100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-10-b-pitch-5-8x3-8-sku-10600100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a triple-strand chain, there are 3 pieces required. - [Cranked chain link type 15 / C for premium stainless steel roller chain 08 B-1 SKU: 10599005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-08-b-1-sku-10599005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 08 B-1 SKU: 10599004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-08-b-1-sku-10599004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 08 B-1 pitch 1/2x5/16" SKU: 10599004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-08-b-1-pitch-1-2x5-16-sku-10599004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 08 B-1 SKU: 10599003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-08-b-1-sku-10599003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 08 B-1 pitch 1/2x5/16" with straight plates SKU: 10599003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-08-b-1-pitch-1-2x5-16-with-straight-plates-sku-10599003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Inner chain link type 4 / B stainless steel for roller chain similar to 08 B pitch 1/2x5/16" with straight plates SKU: 10599001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-08-b-pitch-1-2x5-16-with-straight-plates-sku-10599001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B stainless steel for roller chain similar to 08 B pitch 1/2x5/16" SKU: 10599001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-08-b-pitch-1-2x5-16-sku-10599001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 08 B-1 SKU: 10577005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-08-b-1-sku-10577005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 08 B-1 SKU: 10577004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-08-b-1-sku-10577004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Self-lubrication cranked chain link type 12 / L for roller chain similar to 08 B-1 SLR pitch 1/2x5/16" SKU: 10577004](https://maedler.in/product/self-lubrication-cranked-chain-link-type-12-l-for-roller-chain-similar-to-08-b-1-slr-pitch-1-2x5-16-sku-10577004/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 08 B-1 SKU: 10577003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-08-b-1-sku-10577003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Self-lubrication chain connecting link type 11 / E for roller chain similar to 08 B-1 SLR pitch 1/2x5/16" SKU: 10577003](https://maedler.in/product/self-lubrication-chain-connecting-link-type-11-e-for-roller-chain-similar-to-08-b-1-slr-pitch-1-2x5-16-sku-10577003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Self-lubrication inner chain link type 4 / B for roller chain similar to 08 B SLR pitch 1/2x5/16" SKU: 10577001](https://maedler.in/product/self-lubrication-inner-chain-link-type-4-b-for-roller-chain-similar-to-08-b-slr-pitch-1-2x5-16-sku-10577001/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Cranked chain link type 15 / C for roller chain Neptune 08 B-1 SKU: 10566005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-08-b-1-sku-10566005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 08 B-1 SKU: 10566004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-08-b-1-sku-10566004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 08 B-1 NP pitch 1/2x5/16" nickel-plated SKU: 10566004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-08-b-1-np-pitch-1-2x5-16-nickel-plated-sku-10566004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 08 B-1 SKU: 10566003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-08-b-1-sku-10566003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 08 B-1 NP pitch 1/2x5/16" nickel-plated packing unit 5 pieces SKU: 10566003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-08-b-1-np-pitch-1-2x5-16-nickel-plated-packing-unit-5-pieces-sku-10566003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 08 B NP pitch 1/2x5/16" nickel-plated SKU: 10566001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-08-b-np-pitch-1-2x5-16-nickel-plated-sku-10566001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 08 B-1 pitch 1/2x5/16 SKU: 10500500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-08-b-1-pitch-1-2x5-16-sku-10500500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 08 B-1 pitch 1/2x5/16 SKU: 10500400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-08-b-1-pitch-1-2x5-16-sku-10500400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for roller chain DIN ISO 606 08 B-1-GL pitch 1/2x5/16" with straight plates packing unit 5 pieces SKU: 10500300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-din-iso-606-08-b-1-gl-pitch-1-2x5-16-with-straight-plates-packing-unit-5-pieces-sku-10500300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain 08 B-1 pitch 1/2x5/16" packing unit 5 pieces SKU: 10500300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-08-b-1-pitch-1-2x5-16-packing-unit-5-pieces-sku-10500300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4/B for roller chain DIN ISO 606 08 B - GL pitch 1/2x5/16" with straight plates SKU: 10500100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-08-b-gl-pitch-1-2x5-16-with-straight-plates-sku-10500100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 08 B pitch 1/2x5/16" SKU: 10500100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-08-b-pitch-1-2x5-16-sku-10500100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a triple-strand chain, there are 3 pieces required. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 083 pitch 1/2x3/16" SKU: 10399004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-083-pitch-1-2x3-16-sku-10399004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 083 pitch 1/2x3/16" SKU: 10399003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-083-pitch-1-2x3-16-sku-10399003/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). Size 20 B-1 with cottered pins. - [Inner chain link type 4 / B stainless steel for roller chain similar to 083 pitch 1/2x3/16" SKU: 10399001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-083-pitch-1-2x3-16-sku-10399001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain company standard pitch 1/2x3/16" V SKU: 10340500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-company-standard-pitch-1-2x3-16-v-sku-10340500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain company standard pitch 1/2x3/16" V SKU: 10340400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-company-standard-pitch-1-2x3-16-v-sku-10340400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain company standard pitch 1/2x3/16" V SKU: 10340300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-company-standard-pitch-1-2x3-16-v-sku-10340300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain company standard pitch 1/2x3/16" V SKU: 10340100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-company-standard-pitch-1-2x3-16-v-sku-10340100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for roller chain 083 pitch 1/2x3/16" SKU: 10300500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-083-pitch-1-2x3-16-sku-10300500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 083 pitch 1/2x3/16" SKU: 10300400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-083-pitch-1-2x3-16-sku-10300400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain 083 pitch 1/2x3/16" packing unit 5 pieces SKU: 10300300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-083-pitch-1-2x3-16-packing-unit-5-pieces-sku-10300300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain 083 pitch 1/2x3/16" SKU: 10300100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-083-pitch-1-2x3-16-sku-10300100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for roller chain 081 pitch 1/2x1/8" SKU: 10200500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-081-pitch-1-2x1-8-sku-10200500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 081 pitch 1/2x1/8" SKU: 10200400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-081-pitch-1-2x1-8-sku-10200400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain 081 pitch 1/2x1/8" packing unit 5 pieces SKU: 10200300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-081-pitch-1-2x1-8-packing-unit-5-pieces-sku-10200300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain 081 pitch 1/2x1/8" SKU: 10200100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-081-pitch-1-2x1-8-sku-10200100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for premium stainless steel roller chain 06 B-1 SKU: 10199005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-06-b-1-sku-10199005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 06 B-1 SKU: 10199004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-06-b-1-sku-10199004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 06 B-1 pitch 3/8x7/32" SKU: 10199004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-06-b-1-pitch-3-8x7-32-sku-10199004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 06 B-1 SKU: 10199003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-06-b-1-sku-10199003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Inner chain link type 4 / B stainless steel for roller chain similar to 06 B pitch 3/8x7/32" SKU: 10199001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-06-b-pitch-3-8x7-32-sku-10199001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 06 B-1 SKU: 10177005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-06-b-1-sku-10177005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 06 B-1 SKU: 10177004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-06-b-1-sku-10177004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 06 B-1 SKU: 10177003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-06-b-1-sku-10177003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for roller chain Neptune 06 B-1 SKU: 10166005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-06-b-1-sku-10166005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 06 B-1 SKU: 10166004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-06-b-1-sku-10166004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 06 B-1 NP pitch 3/8x7/32" nickel-plated SKU: 10166004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-06-b-1-np-pitch-3-8x7-32-nickel-plated-sku-10166004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 06 B-1 SKU: 10166003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-06-b-1-sku-10166003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 06 B-1 NP pitch 3/8x7/32" nickel-plated packing unit 5 pieces SKU: 10166003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-06-b-1-np-pitch-3-8x7-32-nickel-plated-packing-unit-5-pieces-sku-10166003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 06 B NP pitch 3/8x7/32" nickel-plated SKU: 10166001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-06-b-np-pitch-3-8x7-32-nickel-plated-sku-10166001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 06 B-1 pitch 3/8x7/32 SKU: 10100500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-06-b-1-pitch-3-8x7-32-sku-10100500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 06 B-1 pitch 3/8x7/32 SKU: 10100400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-06-b-1-pitch-3-8x7-32-sku-10100400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain06 B-1 pitch 3/8x7/32" packing unit 5 pieces SKU: 10100300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain06-b-1-pitch-3-8x7-32-packing-unit-5-pieces-sku-10100300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain 06 B pitch 3/8x7/32" SKU: 10100100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-06-b-pitch-3-8x7-32-sku-10100100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a double-strand chain, there are 2 pieces required. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 05 B-1 pitch 8mm SKU: 10099804](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-05-b-1-pitch-8mm-sku-10099804/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 05 B-1 pitch 8mm SKU: 10099803](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-05-b-1-pitch-8mm-sku-10099803/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). Size 20 B-1 with cottered pins. - [Inner chain link type 4 / B stainless steel for roller chain similar to 05 B pitch 8mm SKU: 10099801](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-05-b-pitch-8mm-sku-10099801/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C stainless steel for roller chain no. 04 pitch 6mm SKU: 10099605](https://maedler.in/product/cranked-chain-link-type-15-c-stainless-steel-for-roller-chain-no-04-pitch-6mm-sku-10099605/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E stainless steel for roller chain no. 04 pitch 6mm SKU: 10099603](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-no-04-pitch-6mm-sku-10099603/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). Size 20 B-1 with cottered pins. - [Inner chain link type 4 / B stainless steel for roller chain no. 04 pitch 6mm SKU: 10099601](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-no-04-pitch-6mm-sku-10099601/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain 05 B-1 pitch 8mm SKU: 10080500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-05-b-1-pitch-8mm-sku-10080500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain 05 B-1 pitch 8mm packing unit 5 pieces SKU: 10080300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-05-b-1-pitch-8mm-packing-unit-5-pieces-sku-10080300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain 05 B pitch 8mm SKU: 10080100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-05-b-pitch-8mm-sku-10080100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a double-strand chain, there are 2 pieces required. - [Cranked chain link type 12 / L for roller chain similar to 05 B-1 NP pitch 8mm nickel-plated SKU: 10066804](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-05-b-1-np-pitch-8mm-nickel-plated-sku-10066804/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain similar to 05 B-1 NP pitch 8mm nickel-plated packing unit 5 pieces SKU: 10066803](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-05-b-1-np-pitch-8mm-nickel-plated-packing-unit-5-pieces-sku-10066803/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 05 B NP pitch 8mm nickel-plated SKU: 10066801](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-05-b-np-pitch-8mm-nickel-plated-sku-10066801/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain no. 04 pitch 6mm SKU: 10060500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-no-04-pitch-6mm-sku-10060500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain no. 04 pitch 6mm packing unit 5 pieces SKU: 10060300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-no-04-pitch-6mm-packing-unit-5-pieces-sku-10060300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain no. 04 pitch 6mm SKU: 10060100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-no-04-pitch-6mm-sku-10060100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for roller chain no. 03 pitch 5mm SKU: 10030300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-no-03-pitch-5mm-sku-10030300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain no. 03 pitch 5mm SKU: 10030100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-no-03-pitch-5mm-sku-10030100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain link type 10 / K for chain company standard pitch 4mm SKU: 10000200](https://maedler.in/product/chain-link-type-10-k-for-chain-company-standard-pitch-4mm-sku-10000200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Precision worm shaft centre distance 125mm i=62 single-thread SKU: 33226202](https://maedler.in/product/precision-worm-shaft-centre-distance-125mm-i62-single-thread-sku-33226202/): Material: Steel C45 hardened. Shaft ends soft. Tooth flanks ground. Pressure angle: 20°. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, as besides the lead angle, also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=80 SKU: 33078000](https://maedler.in/product/precision-worm-centre-distance-80mm-i80-sku-33078000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=50 SKU: 33075000](https://maedler.in/product/precision-worm-centre-distance-80mm-i50-sku-33075000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=30 SKU: 33073000](https://maedler.in/product/precision-worm-centre-distance-80mm-i30-sku-33073000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=20 SKU: 33072000](https://maedler.in/product/precision-worm-centre-distance-80mm-i20-sku-33072000/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=12 SKU: 33071200](https://maedler.in/product/precision-worm-centre-distance-80mm-i12-sku-33071200/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm centre distance 80mm i=6.75 SKU: 33070700](https://maedler.in/product/precision-worm-centre-distance-80mm-i6-75-sku-33070700/): Material: Steel 11SMnPb37 (1.0715), inspected for fissures, case hardened HV 620-700, ground. Pressure angle 15°. Attention: Keyway not according to DIN. The worms can only be used with gear wheels having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=80 80 teeth SKU: 33068000](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i80-80-teeth-sku-33068000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=50 50 teeth SKU: 33065000](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i50-50-teeth-sku-33065000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=30 30 teeth SKU: 33063000](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i30-30-teeth-sku-33063000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=20 40 teeth SKU: 33062000](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i20-40-teeth-sku-33062000/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=12 48 teeth SKU: 33061200](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i12-48-teeth-sku-33061200/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Precision worm wheel centre distance 80mm i=6.75 27 teeth SKU: 33060700](https://maedler.in/product/precision-worm-wheel-centre-distance-80mm-i6-75-27-teeth-sku-33060700/): Material: Special brass CuZn37Mn3Al2PbSi/So. Pressure angle 15°. The gear wheels can only be used with worms having the same centre distance and the same transmission. Can be built into gear systems, no reworking required, thus short assembly times. * The figures stated for the efficiency are only reference values, since - besides the lead angle - also mounting, lubrication, speed and assembly have an influence on the efficiency. - [Clamp collar double-split double wide stainless steel 1.4305 bore 30mm with bolts DIN 912 A2-70 SKU: 62499430](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-30mm-with-bolts-din-912-a2-70-sku-62499430/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split double wide stainless steel 1.4305 bore 25mm with bolts DIN 912 A2-70 SKU: 62499425](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-25mm-with-bolts-din-912-a2-70-sku-62499425/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split double wide stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 SKU: 62499420](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-20mm-with-bolts-din-912-a2-70-sku-62499420/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split double wide stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 SKU: 62499416](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-16mm-with-bolts-din-912-a2-70-sku-62499416/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split double wide stainless steel 1.4305 bore 12mm with bolts DIN 912 A2-70 SKU: 62499412](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-12mm-with-bolts-din-912-a2-70-sku-62499412/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split double wide stainless steel 1.4305 bore 10mm with bolts DIN 912 A2-70 SKU: 62499410](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-10mm-with-bolts-din-912-a2-70-sku-62499410/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split double wide stainless steel 1.4305 bore 8mm with bolts DIN 912 A2-70 SKU: 62499408](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-8mm-with-bolts-din-912-a2-70-sku-62499408/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split double wide stainless steel 1.4305 bore 6mm with bolts DIN 912 A2-70 SKU: 62499406](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-6mm-with-bolts-din-912-a2-70-sku-62499406/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 50mm with bolts DIN 912 A2-70 SKU: 62499150](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-50mm-with-bolts-din-912-a2-70-sku-62499150/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 SKU: 62499140](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-40mm-with-bolts-din-912-a2-70-sku-62499140/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 30mm with bolts DIN 912 A2-70 SKU: 62499130](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-30mm-with-bolts-din-912-a2-70-sku-62499130/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 25mm with bolts DIN 912 A2-70 SKU: 62499125](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-25mm-with-bolts-din-912-a2-70-sku-62499125/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 SKU: 62499120](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-20mm-with-bolts-din-912-a2-70-sku-62499120/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 SKU: 62499116](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-16mm-with-bolts-din-912-a2-70-sku-62499116/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 12mm with bolts DIN 912 A2-70 SKU: 62499112](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-12mm-with-bolts-din-912-a2-70-sku-62499112/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 10mm with bolts DIN 912 A2-70 SKU: 62499110](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-10mm-with-bolts-din-912-a2-70-sku-62499110/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 8mm with bolts DIN 912 A2-70 SKU: 62499108](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-8mm-with-bolts-din-912-a2-70-sku-62499108/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single-split double wide stainless steel 1.4305 bore 6mm with bolts DIN 912 A2-70 SKU: 62499106](https://maedler.in/product/clamp-collar-single-split-double-wide-stainless-steel-1-4305-bore-6mm-with-bolts-din-912-a2-70-sku-62499106/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70.Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split double wide steel C45 black oxide finished bore 50mm with bolts DIN 912 12.9 SKU: 62445000](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-50mm-with-bolts-din-912-12-9-sku-62445000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split double wide steel C45 black oxide finished bore 40mm with bolts DIN 912 12.9 SKU: 62444000](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-40mm-with-bolts-din-912-12-9-sku-62444000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split double wide steel C45 black oxide finished bore 30mm with bolts DIN 912 12.9 SKU: 62443000](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-30mm-with-bolts-din-912-12-9-sku-62443000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split double wide steel C45 black oxide finished bore 25mm with bolts DIN 912 12.9 SKU: 62442500](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-25mm-with-bolts-din-912-12-9-sku-62442500/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split double wide steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 SKU: 62442000](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-20mm-with-bolts-din-912-12-9-sku-62442000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split double wide steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 SKU: 62441600](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-16mm-with-bolts-din-912-12-9-sku-62441600/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split double wide steel C45 black oxide finished bore 12mm with bolts DIN 912 12.9 SKU: 62441200](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-12mm-with-bolts-din-912-12-9-sku-62441200/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split double wide steel C45 black oxide finished bore 10mm with bolts DIN 912 12.9 SKU: 62441000](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-10mm-with-bolts-din-912-12-9-sku-62441000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split double wide steel C45 black oxide finished bore 8mm with bolts DIN 912 12.9 SKU: 62440800](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-8mm-with-bolts-din-912-12-9-sku-62440800/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Clamp collar double-split double wide steel C45 black oxide finished bore 6mm with bolts DIN 912 12.9 SKU: 62440600](https://maedler.in/product/clamp-collar-double-split-double-wide-steel-c45-black-oxide-finished-bore-6mm-with-bolts-din-912-12-9-sku-62440600/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel: The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [SKF deep groove ball bearing single row inner diameter 4mm outer diameter 13mm width 5mm shielded on both sides SKU: 624-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-4mm-outer-diameter-13mm-width-5mm-shielded-on-both-sides-sku-624-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 4mm outer diameter 13mm width 5mm shielded on both sides clearance C3 SKU: 624-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-4mm-outer-diameter-13mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-624-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 4mm outer diameter 13mm width 5mm sealed on both sides SKU: 624-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-4mm-outer-diameter-13mm-width-5mm-sealed-on-both-sides-sku-624-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Flanged bush slotted version 50 x 55 / 60 x 22 mm SKU: 62415040](https://maedler.in/product/flanged-bush-slotted-version-50-x-55-60-x-22-mm-sku-62415040/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 50mm with bolt DIN 912 12.9 SKU: 62415000](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-50mm-with-bolt-din-912-12-9-sku-62415000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Flanged bush slotted version 40 x 44 / 53 x 26 mm SKU: 62414040](https://maedler.in/product/flanged-bush-slotted-version-40-x-44-53-x-26-mm-sku-62414040/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 40mm with bolt DIN 912 12.9 SKU: 62414000](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-40mm-with-bolt-din-912-12-9-sku-62414000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Flanged bush slotted version 35 x 39 / 47 x 40 mm SKU: 62413540](https://maedler.in/product/flanged-bush-slotted-version-35-x-39-47-x-40-mm-sku-62413540/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 35 x 39 / 47 x 26 mm SKU: 62413520](https://maedler.in/product/flanged-bush-slotted-version-35-x-39-47-x-26-mm-sku-62413520/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 30 x 34 / 42 x 30 mm SKU: 62413030](https://maedler.in/product/flanged-bush-slotted-version-30-x-34-42-x-30-mm-sku-62413030/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 30mm with bolt DIN 912 12.9 SKU: 62413000](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-30mm-with-bolt-din-912-12-9-sku-62413000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Flanged bush slotted version 25 x 28 / 35 x 26,5 mm SKU: 62412525](https://maedler.in/product/flanged-bush-slotted-version-25-x-28-35-x-265-mm-sku-62412525/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 25mm with bolt DIN 912 12.9 SKU: 62412500](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-25mm-with-bolt-din-912-12-9-sku-62412500/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Flanged bush slotted version 22 x 25 / 32 x 21,5 mm SKU: 62412220](https://maedler.in/product/flanged-bush-slotted-version-22-x-25-32-x-215-mm-sku-62412220/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 20 x 23 / 30 x 11,5 mm SKU: 62412012](https://maedler.in/product/flanged-bush-slotted-version-20-x-23-30-x-115-mm-sku-62412012/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 20mm with bolt DIN 912 12.9 SKU: 62412000](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-20mm-with-bolt-din-912-12-9-sku-62412000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Bush with collar, slotted type 18 x 20 / 26 x 12 mm SKU: 62411812](https://maedler.in/product/bush-with-collar-slotted-type-18-x-20-26-x-12-mm-sku-62411812/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 16 x 18 / 24 x 17 mm SKU: 62411620](https://maedler.in/product/flanged-bush-slotted-version-16-x-18-24-x-17-mm-sku-62411620/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 16mm with bolt DIN 912 12.9 SKU: 62411600](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-16mm-with-bolt-din-912-12-9-sku-62411600/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Flanged bush slotted version 15 x 17 / 23 x 17 mm SKU: 62411520](https://maedler.in/product/flanged-bush-slotted-version-15-x-17-23-x-17-mm-sku-62411520/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 15 x 17 / 23 x 12 mm SKU: 62411512](https://maedler.in/product/flanged-bush-slotted-version-15-x-17-23-x-12-mm-sku-62411512/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 14 x 16 / 22 x 17 mm SKU: 62411415](https://maedler.in/product/flanged-bush-slotted-version-14-x-16-22-x-17-mm-sku-62411415/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 12 x 14 / 20 x 17 mm SKU: 62411215](https://maedler.in/product/flanged-bush-slotted-version-12-x-14-20-x-17-mm-sku-62411215/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 12mm with bolt DIN 912 12.9 SKU: 62411200](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-12mm-with-bolt-din-912-12-9-sku-62411200/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Flanged bush slotted version 10 x 12 / 18 x 12 mm SKU: 62411012](https://maedler.in/product/flanged-bush-slotted-version-10-x-12-18-x-12-mm-sku-62411012/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 10 x 12 / 18 x 9 mm SKU: 62411008](https://maedler.in/product/flanged-bush-slotted-version-10-x-12-18-x-9-mm-sku-62411008/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 10mm with bolt DIN 912 12.9 SKU: 62411000](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-10mm-with-bolt-din-912-12-9-sku-62411000/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Flanged bush slotted version 8 x 10 / 15 x 9,5 mm SKU: 62410808](https://maedler.in/product/flanged-bush-slotted-version-8-x-10-15-x-95-mm-sku-62410808/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 8 x 10 / 15 x 5,5 mm SKU: 62410806](https://maedler.in/product/flanged-bush-slotted-version-8-x-10-15-x-55-mm-sku-62410806/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 8mm with bolt DIN 912 12.9 SKU: 62410800](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-8mm-with-bolt-din-912-12-9-sku-62410800/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Flanged bush slotted version 6 x 8,0 / 12 x 7 mm SKU: 62410606](https://maedler.in/product/flanged-bush-slotted-version-6-x-80-12-x-7-mm-sku-62410606/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Clamp collar single-split double wide steel C45 black oxide finished bore 6mm with bolt DIN 912 12.9 SKU: 62410600](https://maedler.in/product/clamp-collar-single-split-double-wide-steel-c45-black-oxide-finished-bore-6mm-with-bolt-din-912-12-9-sku-62410600/): Material: Steel C45, black oxide finish. Screws steel 12.9. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. Remarks to collars from steel:The black oxide on the clamping collars is formulated as part of the total performance of the product. It enhances the holding ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion protection. - [Flanged bush slotted version 5 x 7,0 / 10 x 6 mm SKU: 62410505](https://maedler.in/product/flanged-bush-slotted-version-5-x-70-10-x-6-mm-sku-62410505/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 4 x 5,5 / 9 x 5,6 mm SKU: 62410404](https://maedler.in/product/flanged-bush-slotted-version-4-x-55-9-x-56-mm-sku-62410404/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Flanged bush slotted version 3 x 4,5 / 7 x 5 mm SKU: 62410304](https://maedler.in/product/flanged-bush-slotted-version-3-x-45-7-x-5-mm-sku-62410304/): Plain bearing flange bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 Paired contact surface Recommended: hardened contact surfaces with a surface roughness of Rz3 and finer. - [Cylindrical bush slotted version 100 x 105 x 115 mm SKU: 62410099](https://maedler.in/product/cylindrical-bush-slotted-version-100-x-105-x-115-mm-sku-62410099/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 100 x 105 x 80 mm SKU: 62410080](https://maedler.in/product/cylindrical-bush-slotted-version-100-x-105-x-80-mm-sku-62410080/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 100 x 105 x 50 mm SKU: 62410050](https://maedler.in/product/cylindrical-bush-slotted-version-100-x-105-x-50-mm-sku-62410050/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 90 x 95 x 100 mm SKU: 62409099](https://maedler.in/product/cylindrical-bush-slotted-version-90-x-95-x-100-mm-sku-62409099/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 90 x 95 x 80 mm SKU: 62409080](https://maedler.in/product/cylindrical-bush-slotted-version-90-x-95-x-80-mm-sku-62409080/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 90 x 95 x 50 mm SKU: 62409050](https://maedler.in/product/cylindrical-bush-slotted-version-90-x-95-x-50-mm-sku-62409050/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 80 x 85 x 80 mm SKU: 62408080](https://maedler.in/product/cylindrical-bush-slotted-version-80-x-85-x-80-mm-sku-62408080/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 80 x 85 x 60 mm SKU: 62408060](https://maedler.in/product/cylindrical-bush-slotted-version-80-x-85-x-60-mm-sku-62408060/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 80 x 85 x 40 mm SKU: 62408040](https://maedler.in/product/cylindrical-bush-slotted-version-80-x-85-x-40-mm-sku-62408040/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 70 x 75 x 80 mm SKU: 62407080](https://maedler.in/product/cylindrical-bush-slotted-version-70-x-75-x-80-mm-sku-62407080/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 70 x 75 x 60 mm SKU: 62407060](https://maedler.in/product/cylindrical-bush-slotted-version-70-x-75-x-60-mm-sku-62407060/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 70 x 75 x 40 mm SKU: 62407040](https://maedler.in/product/cylindrical-bush-slotted-version-70-x-75-x-40-mm-sku-62407040/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 65 x 70 x 50 mm SKU: 62406550](https://maedler.in/product/cylindrical-bush-slotted-version-65-x-70-x-50-mm-sku-62406550/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 60 x 65 x 70 mm SKU: 62406070](https://maedler.in/product/cylindrical-bush-slotted-version-60-x-65-x-70-mm-sku-62406070/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 60 x 65 x 50 mm SKU: 62406050](https://maedler.in/product/cylindrical-bush-slotted-version-60-x-65-x-50-mm-sku-62406050/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 60 x 65 x 30 mm SKU: 62406030](https://maedler.in/product/cylindrical-bush-slotted-version-60-x-65-x-30-mm-sku-62406030/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 55 x 60 x 50 mm SKU: 62405550](https://maedler.in/product/cylindrical-bush-slotted-version-55-x-60-x-50-mm-sku-62405550/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 50 x 55 x 50 mm SKU: 62405050](https://maedler.in/product/cylindrical-bush-slotted-version-50-x-55-x-50-mm-sku-62405050/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 50 x 55 x 30 mm SKU: 62405030](https://maedler.in/product/cylindrical-bush-slotted-version-50-x-55-x-30-mm-sku-62405030/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 40 x 44 x 50 mm SKU: 62404050](https://maedler.in/product/cylindrical-bush-slotted-version-40-x-44-x-50-mm-sku-62404050/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 40 x 44 x 30 mm SKU: 62404030](https://maedler.in/product/cylindrical-bush-slotted-version-40-x-44-x-30-mm-sku-62404030/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 40 x 44 x 20 mm SKU: 62404020](https://maedler.in/product/cylindrical-bush-slotted-version-40-x-44-x-20-mm-sku-62404020/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 38 x 42 x 30 mm SKU: 62403830](https://maedler.in/product/cylindrical-bush-slotted-version-38-x-42-x-30-mm-sku-62403830/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 35 x 39 x 40 mm SKU: 62403540](https://maedler.in/product/cylindrical-bush-slotted-version-35-x-39-x-40-mm-sku-62403540/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 35 x 39 x 20 mm SKU: 62403520](https://maedler.in/product/cylindrical-bush-slotted-version-35-x-39-x-20-mm-sku-62403520/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 32 x 36 x 25 mm SKU: 62403225](https://maedler.in/product/cylindrical-bush-slotted-version-32-x-36-x-25-mm-sku-62403225/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 32 x 36 x 20 mm SKU: 62403220](https://maedler.in/product/cylindrical-bush-slotted-version-32-x-36-x-20-mm-sku-62403220/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 30 x 34 x 35 mm SKU: 62403035](https://maedler.in/product/cylindrical-bush-slotted-version-30-x-34-x-35-mm-sku-62403035/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 30 x 34 x 30 mm SKU: 62403030](https://maedler.in/product/cylindrical-bush-slotted-version-30-x-34-x-30-mm-sku-62403030/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 30 x 34 x 20 mm SKU: 62403020](https://maedler.in/product/cylindrical-bush-slotted-version-30-x-34-x-20-mm-sku-62403020/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 30 x 34 x 15 mm SKU: 62403015](https://maedler.in/product/cylindrical-bush-slotted-version-30-x-34-x-15-mm-sku-62403015/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 30 x 34 x 12 mm SKU: 62403012](https://maedler.in/product/cylindrical-bush-slotted-version-30-x-34-x-12-mm-sku-62403012/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 28 x 32 x 25 mm SKU: 62402825](https://maedler.in/product/cylindrical-bush-slotted-version-28-x-32-x-25-mm-sku-62402825/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 28 x 32 x 20 mm SKU: 62402820](https://maedler.in/product/cylindrical-bush-slotted-version-28-x-32-x-20-mm-sku-62402820/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 26 x 30 x 30 mm SKU: 62402630](https://maedler.in/product/cylindrical-bush-slotted-version-26-x-30-x-30-mm-sku-62402630/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 26 x 30 x 20 mm SKU: 62402620](https://maedler.in/product/cylindrical-bush-slotted-version-26-x-30-x-20-mm-sku-62402620/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cylindrical bush slotted version 26 x 30 x 15 mm SKU: 62402615](https://maedler.in/product/cylindrical-bush-slotted-version-26-x-30-x-15-mm-sku-62402615/): Plain bearing bush from steel sheet with multi-porous bronze layer and sliding surface from PTFE-lead-compound. Specially suited for lubrication-free running, for high loads, extrem temperatures. Main characteristics Self lubricating and maintenance free, ready to install. Perfectly suited for lower sliding speeds. Low wear, low friction coefficient, no 'stick slip'. Perfectly suited for circular, swivelling and partly for axial movement. Can be used at extremely high bearing loads. No moisture absorption. High corrosion Construction Tin-plated steel back (incl. edges). Multi-porous bronze layer, sliding surface PTFE-lead-compound. Technical data Stat. surface pressure: max. 250 N/mm² Dyn. bearing load: max. 56 N/mm² Friction coefficient: 0.03 - 0.20 Sliding speed: max. 2 m/s Temperature range: -195°C to 280°C Therm. conductivity: 40 W/K*m Recommended mounting tolerances Housing bore H7, shaft tolerance up to 55 Ø f7 above 55 Ø h8 - [Cranked chain link type 12 / L for roller chain Titan 24 B-1 SKU: 11000400T](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-titan-24-b-1-sku-11000400t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Plates black oxided. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 24 B-1 pitch 1 1/2x1" SKU: 11000400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-24-b-1-pitch-1-1-2x1-sku-11000400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for roller chain Titan 24 B-1 SKU: 11000200T](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-titan-24-b-1-sku-11000200t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. - [Chain link type 10/S for roller chain 24B-1 pitch 1 1/2x1" SKU: 11000200](https://maedler.in/product/chain-link-type-10-s-for-roller-chain-24b-1-pitch-1-1-2x1-sku-11000200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 24 B pitch 1 1/2x1" SKU: 11000100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-24-b-pitch-1-1-2x1-sku-11000100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for roller chain 20 B-1 pitch 1 1/4x3/4 material stainless steel SKU: 10999004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-20-b-1-pitch-1-1-4x3-4-material-stainless-steel-sku-10999004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 20 B-1 pitch 1 1/4x3/4" with straight plates SKU: 10999003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-20-b-1-pitch-1-1-4x3-4-with-straight-plates-sku-10999003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Chain connecting link type 11 / E for roller chain 20 B-1 pitch 1 1/4x3/4 material stainless steel SKU: 10999003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-20-b-1-pitch-1-1-4x3-4-material-stainless-steel-sku-10999003/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). Size 20 B-1 with cottered pins. - [Inner chain link type 4 / B stainless steel for roller chain similar to 20 B pitch 1 1/4x3/4" with straight plates SKU: 10999001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-20-b-pitch-1-1-4x3-4-with-straight-plates-sku-10999001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B for roller chain 20 B pitch 1 1/4x3/4" material stainless steel SKU: 10999001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-20-b-pitch-1-1-4x3-4-material-stainless-steel-sku-10999001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 20 B-1 SKU: 10977005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-20-b-1-sku-10977005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 20 B-1 SKU: 10977004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-20-b-1-sku-10977004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for roller chain Lambda 20B-1 SKU: 10977002L](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-lambda-20b-1-sku-10977002l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for roller chain Neptune 20 B-1 SKU: 10966005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-20-b-1-sku-10966005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 20 B-1 SKU: 10966004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-20-b-1-sku-10966004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 20 B-1 NP pitch 1 1/4x3/4" nickel-plated SKU: 10966004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-20-b-1-np-pitch-1-1-4x3-4-nickel-plated-sku-10966004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain similar to 20 B-1 NP pitch 1 1/4x3/4" nickel-plated SKU: 10966003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-20-b-1-np-pitch-1-1-4x3-4-nickel-plated-sku-10966003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 10 / S for roller chain Neptune 20 B-1 SKU: 10966002N](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-neptune-20-b-1-sku-10966002n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Inner chain link type 4 / B for roller chain similar to 20 B NP pitch 1 1/4x3/4" nickel-plated SKU: 10966001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-20-b-np-pitch-1-1-4x3-4-nickel-plated-sku-10966001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 20 B-1 pitch 1 1/4x3/4 SKU: 10900500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-20-b-1-pitch-1-1-4x3-4-sku-10900500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Titan 20 B-1 SKU: 10900400T](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-titan-20-b-1-sku-10900400t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Plates black oxided. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 20 B-1 pitch 1 1/4x3/4 SKU: 10900400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-20-b-1-pitch-1-1-4x3-4-sku-10900400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10/S with cottered pin for roller chain DIN ISO 606 20 B-1-GL pitch 1 1/4x3/4" with straight plates SKU: 10900300GL](https://maedler.in/product/chain-connecting-link-type-10-s-with-cottered-pin-for-roller-chain-din-iso-606-20-b-1-gl-pitch-1-1-4x3-4-with-straight-plates-sku-10900300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain 20 B-1 pitch 1 1/4x3/4 SKU: 10900300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-20-b-1-pitch-1-1-4x3-4-sku-10900300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Chain connecting link type 10 / S for roller chain Titan 20 B-1 SKU: 10900200T](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-titan-20-b-1-sku-10900200t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. - [Chain link type 10/S for roller chain 20B-1 pitch 1 1/4x3/4 SKU: 10900200](https://maedler.in/product/chain-link-type-10-s-for-roller-chain-20b-1-pitch-1-1-4x3-4-sku-10900200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4/B for roller chain DIN ISO 606 20 B - GL pitch 1 1/4x3/4" with straight plates SKU: 10900100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-20-b-gl-pitch-1-1-4x3-4-with-straight-plates-sku-10900100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 20 B pitch 1 1/4x3/4" SKU: 10900100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-20-b-pitch-1-1-4x3-4-sku-10900100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for premium stainless steel roller chain 16 B-1 SKU: 10899005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-16-b-1-sku-10899005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 16 B-1 SKU: 10899004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-16-b-1-sku-10899004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 16 B-1 pitch 1"x17.02mm SKU: 10899004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-16-b-1-pitch-1x17-02mm-sku-10899004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 16 B-1 SKU: 10899003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-16-b-1-sku-10899003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 16 B-1 pitch 1"x17.02mm with straight plates SKU: 10899003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-16-b-1-pitch-1x17-02mm-with-straight-plates-sku-10899003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Chain coonecting link type 10 / S for premium stainless steel roller chain 16 B-1 SKU: 10899002P](https://maedler.in/product/chain-coonecting-link-type-10-s-for-premium-stainless-steel-roller-chain-16-b-1-sku-10899002p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Inner chain link type 4 / B stainless steel for roller chain similar to 16 B pitch 1"x17.02mm with straight plates SKU: 10899001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-16-b-pitch-1x17-02mm-with-straight-plates-sku-10899001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B stainless steel for roller chain similar to 16 B pitch 1"x17.02mm SKU: 10899001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-16-b-pitch-1x17-02mm-sku-10899001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 16 B-1 SKU: 10877005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-16-b-1-sku-10877005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 16 B-1 SKU: 10877004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-16-b-1-sku-10877004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Self-lubrication cranked chain link type 12 / L for roller chain similar to 16 B-1 SLR pitch 1"x17.02mm SKU: 10877004](https://maedler.in/product/self-lubrication-cranked-chain-link-type-12-l-for-roller-chain-similar-to-16-b-1-slr-pitch-1x17-02mm-sku-10877004/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 16 B-1 SKU: 10877003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-16-b-1-sku-10877003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Self-lubrication chain connecting link type 11 / E for roller chain similar to 16 B-1 SLR pitch 1"x17.02mm SKU: 10877003](https://maedler.in/product/self-lubrication-chain-connecting-link-type-11-e-for-roller-chain-similar-to-16-b-1-slr-pitch-1x17-02mm-sku-10877003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Self-lubrication inner chain link type 4 / B for roller chain similar to 16 B SLR pitch 1"x17,02mm SKU: 10877001](https://maedler.in/product/self-lubrication-inner-chain-link-type-4-b-for-roller-chain-similar-to-16-b-slr-pitch-1x1702mm-sku-10877001/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Cranked chain link type 15 / C for roller chain Neptune 16 B-1 SKU: 10866005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-16-b-1-sku-10866005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 16 B-1 SKU: 10866004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-16-b-1-sku-10866004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 16 B-1 NP pitch 1"x17.02mm nickel-plated SKU: 10866004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-16-b-1-np-pitch-1x17-02mm-nickel-plated-sku-10866004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 16 B-1 SKU: 10866003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-16-b-1-sku-10866003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 16 B-1 NP pitch 1"x17.02mm nickel-plated SKU: 10866003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-16-b-1-np-pitch-1x17-02mm-nickel-plated-sku-10866003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 16 B NP pitch 1"x17.02mm nickel-plated SKU: 10866001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-16-b-np-pitch-1x17-02mm-nickel-plated-sku-10866001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 16 B-1 pitch 1"x17.02mm SKU: 10800500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-16-b-1-pitch-1x17-02mm-sku-10800500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Titan 16 B-1 SKU: 10800400T](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-titan-16-b-1-sku-10800400t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Plates black oxided. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 16 B-1 pitch 1"x17.02mm SKU: 10800400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-16-b-1-pitch-1x17-02mm-sku-10800400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Titan 16 B-1 SKU: 10800300T](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-titan-16-b-1-sku-10800300t/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. - [Chain connecting link type 10 / S with cottered pin for roller chain DIN ISO 606 16 B-1-GLH pitch 1"x17,02mm with straight plates high version SKU: 10800300GLH](https://maedler.in/product/chain-connecting-link-type-10-s-with-cottered-pin-for-roller-chain-din-iso-606-16-b-1-glh-pitch-1x1702mm-with-straight-plates-high-version-sku-10800300glh/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 10 / S with cottered pin for roller chain DIN ISO 606 16 B-1-GL pitch 1"x17,02mm with straight plates SKU: 10800300GL](https://maedler.in/product/chain-connecting-link-type-10-s-with-cottered-pin-for-roller-chain-din-iso-606-16-b-1-gl-pitch-1x1702mm-with-straight-plates-sku-10800300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain16 B-1 pitch 1"x17.02mm SKU: 10800300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain16-b-1-pitch-1x17-02mm-sku-10800300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Chain link type 10/S for roller chain16B-1 pitch 1"x17.02mm SKU: 10800200](https://maedler.in/product/chain-link-type-10-s-for-roller-chain16b-1-pitch-1x17-02mm-sku-10800200/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4/B for roller chain DIN ISO 606 16 B - GLH pitch 1"x17,02mm with straight plates high performance SKU: 10800100GLH](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-16-b-glh-pitch-1x1702mm-with-straight-plates-high-performance-sku-10800100glh/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a double-strand chain, there are 2 pieces required. - [Inner chain link type 4/B for roller chain DIN ISO 606 16 B - GL pitch 1"x17,02mm with straight plates SKU: 10800100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-16-b-gl-pitch-1x1702mm-with-straight-plates-sku-10800100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain16 B pitch 1"x17.02mm SKU: 10800100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain16-b-pitch-1x17-02mm-sku-10800100/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for premium stainless steel roller chain 12 B-1 SKU: 10799005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-12-b-1-sku-10799005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 12 B-1 SKU: 10799004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-12-b-1-sku-10799004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 12 B-1 pitch 3/4x7/16" SKU: 10799004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-12-b-1-pitch-3-4x7-16-sku-10799004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 12 B-1 SKU: 10799003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-12-b-1-sku-10799003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 12 B-1 pitch 3/4x7/16" with straight plates SKU: 10799003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-12-b-1-pitch-3-4x7-16-with-straight-plates-sku-10799003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Chain coonecting link type 10 / S for premium stainless steel roller chain 12 B-1 SKU: 10799002P](https://maedler.in/product/chain-coonecting-link-type-10-s-for-premium-stainless-steel-roller-chain-12-b-1-sku-10799002p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Inner chain link type 4 / B stainless steel for roller chain similar to 12 B pitch 3/4x7/16" with straight plates SKU: 10799001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-12-b-pitch-3-4x7-16-with-straight-plates-sku-10799001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B stainless steel for roller chain similar to 12 B pitch 3/4x7/16" SKU: 10799001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-12-b-pitch-3-4x7-16-sku-10799001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 12 B-1 SKU: 10777005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-12-b-1-sku-10777005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 12 B-1 SKU: 10777004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-12-b-1-sku-10777004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Self-lubrication cranked chain link type 12 / L for roller chain similar to 12 B-1 SLR pitch 3/4x7/16" SKU: 10777004](https://maedler.in/product/self-lubrication-cranked-chain-link-type-12-l-for-roller-chain-similar-to-12-b-1-slr-pitch-3-4x7-16-sku-10777004/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 12 B-1 SKU: 10777003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-12-b-1-sku-10777003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Self-lubrication chain connecting link type 11 / E for roller chain similar to 12 B-1 SLR pitch 3/4x7/16" SKU: 10777003](https://maedler.in/product/self-lubrication-chain-connecting-link-type-11-e-for-roller-chain-similar-to-12-b-1-slr-pitch-3-4x7-16-sku-10777003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Self-lubrication inner chain link type 4 / B for roller chain similar to 12 B SLR pitch 3/4x7/16" SKU: 10777001](https://maedler.in/product/self-lubrication-inner-chain-link-type-4-b-for-roller-chain-similar-to-12-b-slr-pitch-3-4x7-16-sku-10777001/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Cranked chain link type 15 / C for roller chain Neptune 12 B-1 SKU: 10766005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-12-b-1-sku-10766005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 12 B-1 SKU: 10766004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-12-b-1-sku-10766004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 12 B-1 NP pitch 3/4x7/16" nickel-plated SKU: 10766004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-12-b-1-np-pitch-3-4x7-16-nickel-plated-sku-10766004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Neptune 12 B-1 SKU: 10766003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-neptune-12-b-1-sku-10766003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Chain connecting link type 11 / E for roller chain similar to 12 B-1 NP pitch 3/4x7/16" nickel-plated SKU: 10766003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-12-b-1-np-pitch-3-4x7-16-nickel-plated-sku-10766003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Inner chain link type 4 / B for roller chain similar to 12 B NP pitch 3/4x7/16" nickel-plated SKU: 10766001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-12-b-np-pitch-3-4x7-16-nickel-plated-sku-10766001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Cranked chain link type 15 / C for roller chain 12 B-1 pitch 3/4x7/16" SKU: 10700500](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-12-b-1-pitch-3-4x7-16-sku-10700500/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain 12 B-1 pitch 3/4x7/16" SKU: 10700400](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-12-b-1-pitch-3-4x7-16-sku-10700400/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for roller chain DIN ISO 606 12 B-1-GL pitch 3/4x7/16" with straight plates packing unit 5 pieces SKU: 10700300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-din-iso-606-12-b-1-gl-pitch-3-4x7-16-with-straight-plates-packing-unit-5-pieces-sku-10700300gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. From size 16 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 11 / E for roller chain 12 B-1 pitch 3/4x7/16" packing unit 5 pieces SKU: 10700300](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-12-b-1-pitch-3-4x7-16-packing-unit-5-pieces-sku-10700300/): ' According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.* Company standard.** Packing units of 5 pieces. - [Inner chain link type 4/B for roller chain DIN ISO 606 12 B - GL pitch 3/4x7/16" with straight plates SKU: 10700100GL](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-din-iso-606-12-b-gl-pitch-3-4x7-16-with-straight-plates-sku-10700100gl/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Inner chain link type 4 / B for roller chain 12 B pitch 3/4x7/16" SKU: 10700100](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-12-b-pitch-3-4x7-16-sku-10700100/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. Attention: For a triple-strand chain, there are 3 pieces required. - [Cranked chain link type 15 / C for premium stainless steel roller chain 10 B-1 SKU: 10699005P](https://maedler.in/product/cranked-chain-link-type-15-c-for-premium-stainless-steel-roller-chain-10-b-1-sku-10699005p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for premium stainless steel roller chain 10 B-1 SKU: 10699004P](https://maedler.in/product/cranked-chain-link-type-12-l-for-premium-stainless-steel-roller-chain-10-b-1-sku-10699004p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L stainless steel for roller chain similar to 10 B-1 pitch 5/8x3/8" SKU: 10699004](https://maedler.in/product/cranked-chain-link-type-12-l-stainless-steel-for-roller-chain-similar-to-10-b-1-pitch-5-8x3-8-sku-10699004/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%.Product no. 10399004 only available as rivet link. - [Chain connecting link type 11 / E for premium stainless steel roller chain 10 B-1 SKU: 10699003P](https://maedler.in/product/chain-connecting-link-type-11-e-for-premium-stainless-steel-roller-chain-10-b-1-sku-10699003p/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. - [Chain connecting link type 11 / E stainless steel for roller chain similar to 10 B-1 pitch 5/8x3/8" with straight plates SKU: 10699003GL](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-10-b-1-pitch-5-8x3-8-with-straight-plates-sku-10699003gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). From size 16 B-1 with cottered pin. - [Inner chain link type 4 / B stainless steel for roller chain similar to 10 B pitch 5/8x3/8" with straight plates SKU: 10699001GL](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-10-b-pitch-5-8x3-8-with-straight-plates-sku-10699001gl/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Inner chain link type 4 / B stainless steel for roller chain similar to 10 B pitch 5/8x3/8" SKU: 10699001](https://maedler.in/product/inner-chain-link-type-4-b-stainless-steel-for-roller-chain-similar-to-10-b-pitch-5-8x3-8-sku-10699001/): Material: stainless steel 1.4301. Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Cranked chain link type 15 / C for roller chain Lambda 10 B-1 SKU: 10677005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-10-b-1-sku-10677005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 10 B-1 SKU: 10677004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-10-b-1-sku-10677004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Self-lubrication cranked chain link type 12 / L for roller chain similar to 10 B-1 SLR pitch 5/8x3/8" SKU: 10677004](https://maedler.in/product/self-lubrication-cranked-chain-link-type-12-l-for-roller-chain-similar-to-10-b-1-slr-pitch-5-8x3-8-sku-10677004/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain Lambda 10 B-1 SKU: 10677003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-lambda-10-b-1-sku-10677003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Self-lubrication chain connecting link type 11 / E for roller chain similar to 10 B-1 SLR pitch 5/8x3/8" SKU: 10677003](https://maedler.in/product/self-lubrication-chain-connecting-link-type-11-e-for-roller-chain-similar-to-10-b-1-slr-pitch-5-8x3-8-sku-10677003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Self-lubrication inner chain link type 4 / B for roller chain similar to 10 B SLR pitch 5/8x3/8" SKU: 10677001](https://maedler.in/product/self-lubrication-inner-chain-link-type-4-b-for-roller-chain-similar-to-10-b-slr-pitch-5-8x3-8-sku-10677001/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, coated pins. Size 16 B-1 with cottered pin. - [Cranked chain link type 15 / C for roller chain Neptune 10 B-1 SKU: 10666005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-neptune-10-b-1-sku-10666005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Neptune 10 B-1 SKU: 10666004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-10-b-1-sku-10666004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Ball pillow block bearing UP 000 bore 10mm with eccentric ring material zinc die cast SKU: 62571000](https://maedler.in/product/ball-pillow-block-bearing-up-000-bore-10mm-with-eccentric-ring-material-zinc-die-cast-sku-62571000/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing KP 005 bore 25mm material zinc die cast SKU: 62562500](https://maedler.in/product/ball-pillow-block-bearing-kp-005-bore-25mm-material-zinc-die-cast-sku-62562500/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing KP 004 bore 20mm material zinc die cast SKU: 62562000](https://maedler.in/product/ball-pillow-block-bearing-kp-004-bore-20mm-material-zinc-die-cast-sku-62562000/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing KP 003 bore 17mm material zinc die cast SKU: 62561700](https://maedler.in/product/ball-pillow-block-bearing-kp-003-bore-17mm-material-zinc-die-cast-sku-62561700/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing KP 002 bore 15mm material zinc die cast SKU: 62561500](https://maedler.in/product/ball-pillow-block-bearing-kp-002-bore-15mm-material-zinc-die-cast-sku-62561500/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing KP 001 bore 12mm material zinc die cast SKU: 62561200](https://maedler.in/product/ball-pillow-block-bearing-kp-001-bore-12mm-material-zinc-die-cast-sku-62561200/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing KP 000 bore 10mm material zinc die cast SKU: 62561000](https://maedler.in/product/ball-pillow-block-bearing-kp-000-bore-10mm-material-zinc-die-cast-sku-62561000/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing KP 08 bore 8mm material zinc die cast SKU: 62560800](https://maedler.in/product/ball-pillow-block-bearing-kp-08-bore-8mm-material-zinc-die-cast-sku-62560800/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Protection cap for pillow bearings TUCP TUCF TUCFL 210 closed design thermoplast white SKU: 62556350](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-210-closed-design-thermoplast-white-sku-62556350/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 209 closed design thermoplast white SKU: 62556345](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-209-closed-design-thermoplast-white-sku-62556345/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 208 closed design thermoplast white SKU: 62556340](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-208-closed-design-thermoplast-white-sku-62556340/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 207 closed design thermoplast white SKU: 62556335](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-207-closed-design-thermoplast-white-sku-62556335/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 206 closed design thermoplast white SKU: 62556330](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-206-closed-design-thermoplast-white-sku-62556330/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 205 closed design thermoplast white SKU: 62556325](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-205-closed-design-thermoplast-white-sku-62556325/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 201-204 closed design thermoplast white SKU: 62556320](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-201-204-closed-design-thermoplast-white-sku-62556320/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 210 open design bore 50mm thermoplast white SKU: 62556250](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-210-open-design-bore-50mm-thermoplast-white-sku-62556250/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 209 open design bore 45mm thermoplast white SKU: 62556245](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-209-open-design-bore-45mm-thermoplast-white-sku-62556245/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 208 open design bore 40mm thermoplast white SKU: 62556240](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-208-open-design-bore-40mm-thermoplast-white-sku-62556240/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 207 open design bore 35mm thermoplast white SKU: 62556235](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-207-open-design-bore-35mm-thermoplast-white-sku-62556235/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 206 open design bore 30mm thermoplast white SKU: 62556230](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-206-open-design-bore-30mm-thermoplast-white-sku-62556230/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 205 open design bore 25mm thermoplast white SKU: 62556225](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-205-open-design-bore-25mm-thermoplast-white-sku-62556225/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 204 open design bore 20mm thermoplast white SKU: 62556220](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-204-open-design-bore-20mm-thermoplast-white-sku-62556220/): Material: Thermoplast PBT, white.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Ball pillow block bearing TUCP 210 bore 50mm housing from thermoplast white bearing stainless steel SKU: 62556150](https://maedler.in/product/ball-pillow-block-bearing-tucp-210-bore-50mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556150/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 209 bore 45mm housing from thermoplast white bearing stainless steel SKU: 62556145](https://maedler.in/product/ball-pillow-block-bearing-tucp-209-bore-45mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556145/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 208 bore 40mm housing from thermoplast white bearing stainless steel SKU: 62556140](https://maedler.in/product/ball-pillow-block-bearing-tucp-208-bore-40mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556140/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 207 bore 35mm housing from thermoplast white bearing stainless steel SKU: 62556135](https://maedler.in/product/ball-pillow-block-bearing-tucp-207-bore-35mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556135/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 206 bore 30mm housing from thermoplast white bearing stainless steel SKU: 62556130](https://maedler.in/product/ball-pillow-block-bearing-tucp-206-bore-30mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556130/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 205 bore 25mm housing from thermoplast white bearing stainless steel SKU: 62556125](https://maedler.in/product/ball-pillow-block-bearing-tucp-205-bore-25mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556125/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 204 bore 20mm housing from thermoplast white bearing stainless steel SKU: 62556120](https://maedler.in/product/ball-pillow-block-bearing-tucp-204-bore-20mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556120/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 203 bore 17mm housing from thermoplast white bearing stainless steel SKU: 62556117](https://maedler.in/product/ball-pillow-block-bearing-tucp-203-bore-17mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556117/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 202 bore 15mm housing from thermoplast white bearing stainless steel SKU: 62556115](https://maedler.in/product/ball-pillow-block-bearing-tucp-202-bore-15mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556115/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 201 bore 12mm housing from thermoplast white bearing stainless steel SKU: 62556112](https://maedler.in/product/ball-pillow-block-bearing-tucp-201-bore-12mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62556112/): Material: Housing: Thermoplast PBT, white. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Protection cap for pillow bearings TUCP TUCF TUCFL 210 closed design thermoplast black SKU: 62555350](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-210-closed-design-thermoplast-black-sku-62555350/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 209 closed design thermoplast black SKU: 62555345](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-209-closed-design-thermoplast-black-sku-62555345/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 208 closed design thermoplast black SKU: 62555340](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-208-closed-design-thermoplast-black-sku-62555340/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 207 closed design thermoplast black SKU: 62555335](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-207-closed-design-thermoplast-black-sku-62555335/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 206 closed design thermoplast black SKU: 62555330](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-206-closed-design-thermoplast-black-sku-62555330/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 205 closed design thermoplast black SKU: 62555325](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-205-closed-design-thermoplast-black-sku-62555325/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 201-204 closed design thermoplast black SKU: 62555320](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-201-204-closed-design-thermoplast-black-sku-62555320/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 210 open design bore 50mm thermoplast black SKU: 62555250](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-210-open-design-bore-50mm-thermoplast-black-sku-62555250/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 209 open design bore 45mm thermoplast black SKU: 62555245](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-209-open-design-bore-45mm-thermoplast-black-sku-62555245/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 208 open design bore 40mm thermoplast black SKU: 62555240](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-208-open-design-bore-40mm-thermoplast-black-sku-62555240/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 207 open design bore 35mm thermoplast black SKU: 62555235](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-207-open-design-bore-35mm-thermoplast-black-sku-62555235/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 206 open design bore 30mm thermoplast black SKU: 62555230](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-206-open-design-bore-30mm-thermoplast-black-sku-62555230/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 205 open design bore 25mm thermoplast black SKU: 62555225](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-205-open-design-bore-25mm-thermoplast-black-sku-62555225/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 204 open design bore 20mm thermoplast black SKU: 62555220](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-204-open-design-bore-20mm-thermoplast-black-sku-62555220/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Protection cap for pillow bearings TUCP TUCF TUCFL 203 open design bore 17mm thermoplast black SKU: 62555217](https://maedler.in/product/protection-cap-for-pillow-bearings-tucp-tucf-tucfl-203-open-design-bore-17mm-thermoplast-black-sku-62555217/): Material: Thermoplast PBT, black.Open Design, with sealing, for shaft side or closed design.The caps fit only on the one bearing side with the setscrews and can get clipped on by hand by the customer. - [Ball pillow block bearing TUCP 210 bore 50mm housing from thermoplast black bearing stainless steel SKU: 62555150](https://maedler.in/product/ball-pillow-block-bearing-tucp-210-bore-50mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555150/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 209 bore 45mm housing from thermoplast black bearing stainless steel SKU: 62555145](https://maedler.in/product/ball-pillow-block-bearing-tucp-209-bore-45mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555145/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 208 bore 40mm housing from thermoplast black bearing stainless steel SKU: 62555140](https://maedler.in/product/ball-pillow-block-bearing-tucp-208-bore-40mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555140/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 207 bore 35mm housing from thermoplast black bearing stainless steel SKU: 62555135](https://maedler.in/product/ball-pillow-block-bearing-tucp-207-bore-35mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555135/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 206 bore 30mm housing from thermoplast black bearing stainless steel SKU: 62555130](https://maedler.in/product/ball-pillow-block-bearing-tucp-206-bore-30mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555130/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 205 bore 25mm housing from thermoplast black bearing stainless steel SKU: 62555125](https://maedler.in/product/ball-pillow-block-bearing-tucp-205-bore-25mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555125/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 204 bore 20mm housing from thermoplast black bearing stainless steel SKU: 62555120](https://maedler.in/product/ball-pillow-block-bearing-tucp-204-bore-20mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555120/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 203 bore 17mm housing from thermoplast black bearing stainless steel SKU: 62555117](https://maedler.in/product/ball-pillow-block-bearing-tucp-203-bore-17mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555117/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 202 bore 15mm housing from thermoplast black bearing stainless steel SKU: 62555115](https://maedler.in/product/ball-pillow-block-bearing-tucp-202-bore-15mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555115/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing TUCP 201 bore 12mm housing from thermoplast black bearing stainless steel SKU: 62555112](https://maedler.in/product/ball-pillow-block-bearing-tucp-201-bore-12mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62555112/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 220 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing UCPA 210 bore 50mm housing cast iron SKU: 62535000](https://maedler.in/product/ball-pillow-block-bearing-ucpa-210-bore-50mm-housing-cast-iron-sku-62535000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UCPA 209 bore 45mm housing cast iron SKU: 62534500](https://maedler.in/product/ball-pillow-block-bearing-ucpa-209-bore-45mm-housing-cast-iron-sku-62534500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UCPA 208 bore 40mm housing cast iron SKU: 62534000](https://maedler.in/product/ball-pillow-block-bearing-ucpa-208-bore-40mm-housing-cast-iron-sku-62534000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UCPA 207 bore 35mm housing cast iron SKU: 62533500](https://maedler.in/product/ball-pillow-block-bearing-ucpa-207-bore-35mm-housing-cast-iron-sku-62533500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UCPA 206 bore 30mm housing cast iron SKU: 62533000](https://maedler.in/product/ball-pillow-block-bearing-ucpa-206-bore-30mm-housing-cast-iron-sku-62533000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UCPA 205 bore 25mm housing cast iron SKU: 62532500](https://maedler.in/product/ball-pillow-block-bearing-ucpa-205-bore-25mm-housing-cast-iron-sku-62532500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UCPA 204 bore 20mm housing cast iron SKU: 62532000](https://maedler.in/product/ball-pillow-block-bearing-ucpa-204-bore-20mm-housing-cast-iron-sku-62532000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UCPA 203 bore 17mm housing cast iron SKU: 62531700](https://maedler.in/product/ball-pillow-block-bearing-ucpa-203-bore-17mm-housing-cast-iron-sku-62531700/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UCPA 202 bore 15mm housing cast iron SKU: 62531500](https://maedler.in/product/ball-pillow-block-bearing-ucpa-202-bore-15mm-housing-cast-iron-sku-62531500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UCPA 201 bore 12mm housing cast iron SKU: 62531200](https://maedler.in/product/ball-pillow-block-bearing-ucpa-201-bore-12mm-housing-cast-iron-sku-62531200/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing BPP 207 bore 35mm two-part steel sheet, zinc-plated SKU: 62523500](https://maedler.in/product/ball-pillow-block-bearing-bpp-207-bore-35mm-two-part-steel-sheet-zinc-plated-sku-62523500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing BPP 206 bore 30mm two-part steel sheet, zinc-plated SKU: 62523000](https://maedler.in/product/ball-pillow-block-bearing-bpp-206-bore-30mm-two-part-steel-sheet-zinc-plated-sku-62523000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing BPP 205 bore 25mm two-part steel sheet, zinc-plated SKU: 62522500](https://maedler.in/product/ball-pillow-block-bearing-bpp-205-bore-25mm-two-part-steel-sheet-zinc-plated-sku-62522500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing BPP 204 bore 20mm two-part steel sheet, zinc-plated SKU: 62522000](https://maedler.in/product/ball-pillow-block-bearing-bpp-204-bore-20mm-two-part-steel-sheet-zinc-plated-sku-62522000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing BPP 203 bore 17mm two-part steel sheet, zinc-plated SKU: 62521700](https://maedler.in/product/ball-pillow-block-bearing-bpp-203-bore-17mm-two-part-steel-sheet-zinc-plated-sku-62521700/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing BPP 202 bore 15mm two-part steel sheet, zinc-plated SKU: 62521500](https://maedler.in/product/ball-pillow-block-bearing-bpp-202-bore-15mm-two-part-steel-sheet-zinc-plated-sku-62521500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing BPP 201 bore 12mm two-part steel sheet, zinc-plated SKU: 62521200](https://maedler.in/product/ball-pillow-block-bearing-bpp-201-bore-12mm-two-part-steel-sheet-zinc-plated-sku-62521200/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [SKF deep groove ball bearing single row inner diameter 5mm outer diameter 16mm width 5mm shielded on both sides SKU: 625-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-16mm-width-5mm-shielded-on-both-sides-sku-625-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 5mm outer diameter 16mm width 5mm shielded on both sides clearance C3 SKU: 625-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-16mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-625-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 5mm outer diameter 16mm width 5mm sealed on both sides SKU: 625-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-16mm-width-5mm-sealed-on-both-sides-sku-625-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 16mm width 5mm sealed on both sides SKU: 625-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-16mm-width-5mm-sealed-on-both-sides-sku-625-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 16mm width 5mm sealed on both sides clearance C3 SKU: 625-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-16mm-width-5mm-sealed-on-both-sides-clearance-c3-sku-625-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Ball pillow block bearing UCP 216 bore 80mm material grey cast iron SKU: 62518000](https://maedler.in/product/ball-pillow-block-bearing-ucp-216-bore-80mm-material-grey-cast-iron-sku-62518000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 215 bore 75mm material grey cast iron SKU: 62517500](https://maedler.in/product/ball-pillow-block-bearing-ucp-215-bore-75mm-material-grey-cast-iron-sku-62517500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 214 bore 70mm material grey cast iron SKU: 62517000](https://maedler.in/product/ball-pillow-block-bearing-ucp-214-bore-70mm-material-grey-cast-iron-sku-62517000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 213 bore 65mm material grey cast iron SKU: 62516500](https://maedler.in/product/ball-pillow-block-bearing-ucp-213-bore-65mm-material-grey-cast-iron-sku-62516500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 212 bore 60mm material grey cast iron SKU: 62516000](https://maedler.in/product/ball-pillow-block-bearing-ucp-212-bore-60mm-material-grey-cast-iron-sku-62516000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 211 bore 55mm material grey cast iron SKU: 62515500](https://maedler.in/product/ball-pillow-block-bearing-ucp-211-bore-55mm-material-grey-cast-iron-sku-62515500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 210 bore 50mm material grey cast iron SKU: 62515000](https://maedler.in/product/ball-pillow-block-bearing-ucp-210-bore-50mm-material-grey-cast-iron-sku-62515000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 209 bore 45mm material grey cast iron SKU: 62514500](https://maedler.in/product/ball-pillow-block-bearing-ucp-209-bore-45mm-material-grey-cast-iron-sku-62514500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 208 bore 40mm material grey cast iron SKU: 62514000](https://maedler.in/product/ball-pillow-block-bearing-ucp-208-bore-40mm-material-grey-cast-iron-sku-62514000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 207 bore 35mm material grey cast iron SKU: 62513500](https://maedler.in/product/ball-pillow-block-bearing-ucp-207-bore-35mm-material-grey-cast-iron-sku-62513500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 206 bore 30mm material grey cast iron SKU: 62513000](https://maedler.in/product/ball-pillow-block-bearing-ucp-206-bore-30mm-material-grey-cast-iron-sku-62513000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 205 bore 25mm material grey cast iron SKU: 62512500](https://maedler.in/product/ball-pillow-block-bearing-ucp-205-bore-25mm-material-grey-cast-iron-sku-62512500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 204 bore 20mm material grey cast iron SKU: 62512000](https://maedler.in/product/ball-pillow-block-bearing-ucp-204-bore-20mm-material-grey-cast-iron-sku-62512000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 203 bore 17mm material grey cast iron SKU: 62511700](https://maedler.in/product/ball-pillow-block-bearing-ucp-203-bore-17mm-material-grey-cast-iron-sku-62511700/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 202 bore 15mm material grey cast iron SKU: 62511500](https://maedler.in/product/ball-pillow-block-bearing-ucp-202-bore-15mm-material-grey-cast-iron-sku-62511500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCP 201 bore 12mm material grey cast iron SKU: 62511200](https://maedler.in/product/ball-pillow-block-bearing-ucp-201-bore-12mm-material-grey-cast-iron-sku-62511200/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 16mm width 5mm shielded on both sides SKU: 625-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-16mm-width-5mm-shielded-on-both-sides-sku-625-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 16mm width 5mm shielded on both sides clearance C3 SKU: 625-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-16mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-625-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 5mm outer diameter 16mm width 5mm open (unsealed) SKU: 625-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-16mm-width-5mm-open-unsealed-sku-625-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [Clamp collar double-split double wide stainless steel 1.4305 bore 50mm with bolts DIN 912 A2-70 SKU: 62499450](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-50mm-with-bolts-din-912-a2-70-sku-62499450/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar double-split double wide stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 SKU: 62499440](https://maedler.in/product/clamp-collar-double-split-double-wide-stainless-steel-1-4305-bore-40mm-with-bolts-din-912-a2-70-sku-62499440/): Material: Stainless steel 1.4305 (AISI 303). Screws stainless steel A2-70. Features: does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide. Tolerance b: +0.08mm -0.25mm . Temperature range: -40°C to +175°C. - [Cranked chain link type 12 / L for triple-strand roller chain 16 B-3 pitch 1"x17.02mm SKU: 13800400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-16-b-3-pitch-1x17-02mm-sku-13800400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 16 B-3 pitch 1"x17.02mm SKU: 13800300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-16-b-3-pitch-1x17-02mm-sku-13800300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for triple-strand roller chain 12 B-3 pitch 3/4x7/16" SKU: 13700400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-12-b-3-pitch-3-4x7-16-sku-13700400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 12 B-3 pitch 3/4x7/16" SKU: 13700300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-12-b-3-pitch-3-4x7-16-sku-13700300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for triple-strand roller chain 10 B-3 pitch 5/8x3/8" SKU: 13600400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-10-b-3-pitch-5-8x3-8-sku-13600400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 10 B-3 pitch 5/8x3/8" SKU: 13600300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-10-b-3-pitch-5-8x3-8-sku-13600300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for triple-strand roller chain 08 B-3 pitch 1/2x5/16" SKU: 13500400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-08-b-3-pitch-1-2x5-16-sku-13500400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 08 B-3 pitch 1/2x5/16" SKU: 13500300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-08-b-3-pitch-1-2x5-16-sku-13500300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for triple-strand roller chain 06 B-3 pitch 3/8x7/32" SKU: 13100400](https://maedler.in/product/cranked-chain-link-type-12-l-for-triple-strand-roller-chain-06-b-3-pitch-3-8x7-32-sku-13100400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for triple-strand roller chain 06 B-3 pitch 3/8x7/32" SKU: 13100300](https://maedler.in/product/chain-connecting-link-type-11-e-for-triple-strand-roller-chain-06-b-3-pitch-3-8x7-32-sku-13100300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 24 B-2 SKU: 12977505L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-24-b-2-sku-12977505l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 24 B-2 SKU: 12977504L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-24-b-2-sku-12977504l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for double-strand roller chain Lambda 24 B-2 SKU: 12977502L](https://maedler.in/product/chain-connecting-link-type-10-s-for-double-strand-roller-chain-lambda-24-b-2-sku-12977502l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 20 B-2 SKU: 12977005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-20-b-2-sku-12977005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 20 B-2 SKU: 12977004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-20-b-2-sku-12977004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for double-strand roller chain Lambda 20 B-2 SKU: 12977002L](https://maedler.in/product/chain-connecting-link-type-10-s-for-double-strand-roller-chain-lambda-20-b-2-sku-12977002l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 20 B-2 SKU: 12966004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-20-b-2-sku-12966004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for double-strand roller chain Neptune 20 B-2 SKU: 12966002N](https://maedler.in/product/chain-connecting-link-type-10-s-for-double-strand-roller-chain-neptune-20-b-2-sku-12966002n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 12 / L for double-strand roller chain 24 B-2 pitch 1 1/2x1" SKU: 12950400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-24-b-2-pitch-1-1-2x1-sku-12950400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain link type 10 / S for double-strand roller chain 24 B-2 pitch 1 1/2x1" SKU: 12950200](https://maedler.in/product/chain-link-type-10-s-for-double-strand-roller-chain-24-b-2-pitch-1-1-2x1-sku-12950200/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 12 / L for double-strand roller chain 20 B-2 pitch 1 1/4x3/4" SKU: 12900400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-20-b-2-pitch-1-1-4x3-4-sku-12900400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 20 B-2-GL pitch 1 1/4x3/4" with straight plates SKU: 12900300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-20-b-2-gl-pitch-1-1-4x3-4-with-straight-plates-sku-12900300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain link type 10 / S for double-strand roller chain 20 B-2 pitch 1 1/4x3/4" SKU: 12900200](https://maedler.in/product/chain-link-type-10-s-for-double-strand-roller-chain-20-b-2-pitch-1-1-4x3-4-sku-12900200/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 16 B-2 pitch 1"x17.02mm material stainless steel SKU: 12899005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-material-stainless-steel-sku-12899005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 16 B-2 pitch 1"x17.02mm material stainless steel SKU: 12899004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-material-stainless-steel-sku-12899004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 16 B-2 pitch 1"x17.02mm material stainless steel SKU: 12899003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-material-stainless-steel-sku-12899003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 16 B-2 SKU: 12877005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-16-b-2-sku-12877005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 16 B-2 SKU: 12877004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-16-b-2-sku-12877004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 16 B-2 SKU: 12877003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-16-b-2-sku-12877003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Chain connecting link type 10 / S for double-strand roller chain Lambda 16 B-2 SKU: 12877002L](https://maedler.in/product/chain-connecting-link-type-10-s-for-double-strand-roller-chain-lambda-16-b-2-sku-12877002l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 16 B-2 SKU: 12866005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-16-b-2-sku-12866005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 16 B-2 SKU: 12866004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-16-b-2-sku-12866004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 16 B-2 SKU: 12866003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-16-b-2-sku-12866003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 16 B-2 pitch 1"x17.02mm SKU: 12800500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-sku-12800500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 16 B-2 pitch 1"x17.02mm SKU: 12800400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-sku-12800400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 16 B-2-GLH pitch 1"x17,02mm with straight plates high version SKU: 12800300GLH](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-16-b-2-glh-pitch-1x1702mm-with-straight-plates-high-version-sku-12800300glh/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 16 B-2-GL pitch 1"x17,02mm with straight plates SKU: 12800300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-16-b-2-gl-pitch-1x1702mm-with-straight-plates-sku-12800300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for double-strand roller chain 16 B-2 pitch 1"x17.02mm SKU: 12800300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-16-b-2-pitch-1x17-02mm-sku-12800300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 12 B-2 pitch 3/4x7/16" material stainless steel SKU: 12799005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-material-stainless-steel-sku-12799005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 12 B-2 pitch 3/4x7/16" material stainless steel SKU: 12799004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-material-stainless-steel-sku-12799004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 12 B-2 pitch 3/4x7/16" material stainless steel SKU: 12799003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-material-stainless-steel-sku-12799003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 12 B-2 SKU: 12777005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-12-b-2-sku-12777005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 12 B-2 SKU: 12777004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-12-b-2-sku-12777004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 12 B-2 SKU: 12777003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-12-b-2-sku-12777003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 12 B-2 SKU: 12766005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-12-b-2-sku-12766005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 12 B-2 SKU: 12766004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-12-b-2-sku-12766004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 12 B-2 SKU: 12766003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-12-b-2-sku-12766003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 12 B-2 pitch 3/4x7/16" SKU: 12700500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-sku-12700500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 12 B-2 pitch 3/4x7/16" SKU: 12700400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-sku-12700400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 12 B-2-GL pitch 3/4x7/16" with straight plates SKU: 12700300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-12-b-2-gl-pitch-3-4x7-16-with-straight-plates-sku-12700300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for double-strand roller chain 12 B-2 pitch 3/4x7/16" SKU: 12700300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-12-b-2-pitch-3-4x7-16-sku-12700300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 10 B-2 pitch 5/8x3/8" material stainless steel SKU: 12699005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-material-stainless-steel-sku-12699005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 10 B-2 pitch 5/8x3/8" material stainless steel SKU: 12699004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-material-stainless-steel-sku-12699004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 10 B-2 pitch 5/8x3/8" material stainless steel SKU: 12699003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-material-stainless-steel-sku-12699003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 10 B-2 SKU: 12677005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-10-b-2-sku-12677005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 10 B-2 SKU: 12677004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-10-b-2-sku-12677004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 10 B-2 SKU: 12677003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-10-b-2-sku-12677003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 10 B-2 SKU: 12666005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-10-b-2-sku-12666005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 10 B-2 SKU: 12666004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-10-b-2-sku-12666004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 10 B-2 SKU: 12666003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-10-b-2-sku-12666003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 10 B-2 pitch 5/8x3/8" SKU: 12600500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-sku-12600500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 10 B-2 pitch 5/8x3/8" SKU: 12600400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-sku-12600400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 10 B-2-GL pitch 5/8x3/8" with straight plates SKU: 12600300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-10-b-2-gl-pitch-5-8x3-8-with-straight-plates-sku-12600300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for double-strand roller chain 10 B-2 pitch 5/8x3/8" SKU: 12600300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-10-b-2-pitch-5-8x3-8-sku-12600300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 08 B-2 pitch 1/2x5/16" material stainless steel SKU: 12599005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-material-stainless-steel-sku-12599005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 08 B-2 pitch 1/2x5/16" material stainless steel SKU: 12599004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-material-stainless-steel-sku-12599004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 08 B-2 pitch 1/2x5/16" material stainless steel SKU: 12599003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-material-stainless-steel-sku-12599003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 08 B-2 SKU: 12577005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-08-b-2-sku-12577005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 08 B-2 SKU: 12577004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-08-b-2-sku-12577004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 08 B-2 SKU: 12577003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-08-b-2-sku-12577003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 08 B-2 SKU: 12566005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-08-b-2-sku-12566005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 08 B-2 SKU: 12566004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-08-b-2-sku-12566004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 08 B-2 SKU: 12566003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-08-b-2-sku-12566003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 08 B-2 pitch 1/2x5/16" SKU: 12500500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-sku-12500500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 08 B-2 pitch 1/2x5/16" SKU: 12500400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-sku-12500400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11/E for double-strand roller chain DIN ISO 606 08 B-2-GL pitch 1/2x5/16" with straight plates SKU: 12500300GL](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-din-iso-606-08-b-2-gl-pitch-1-2x5-16-with-straight-plates-sku-12500300gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Chain connecting link type 11 / E for double-strand roller chain 08 B-2 pitch 1/2x5/16" SKU: 12500300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-08-b-2-pitch-1-2x5-16-sku-12500300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 06 B-2 pitch 3/8x7/32" material stainless steel SKU: 12199005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-material-stainless-steel-sku-12199005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 06 B-2 pitch 3/8x7/32" material stainless steel SKU: 12199004](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-material-stainless-steel-sku-12199004/): Material: Stainless steel 1.4301 (AISI 304).With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 06 B-2 pitch 3/8x7/32" material stainless steel SKU: 12199003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-material-stainless-steel-sku-12199003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain Lambda 06 B-2 SKU: 12177005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-lambda-06-b-2-sku-12177005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Lambda 06 B-2 SKU: 12177003L](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-lambda-06-b-2-sku-12177003l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 15 / C for double-strand roller chain Neptune 06 B-2 SKU: 12166005N](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-neptune-06-b-2-sku-12166005n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain Neptune 06 B-2 SKU: 12166004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-neptune-06-b-2-sku-12166004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain Neptune 06 B-2 SKU: 12166003N](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-neptune-06-b-2-sku-12166003n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Cranked chain link type 15 / C for double-strand roller chain 06 B-2 pitch 3/8x7/32" SKU: 12100500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-sku-12100500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for double-strand roller chain 06 B-2 pitch 3/8x7/32" SKU: 12100400](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-sku-12100400/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 06 B-2 pitch 3/8x7/32" SKU: 12100300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-06-b-2-pitch-3-8x7-32-sku-12100300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for double-strand roller chain 05 B-2 pitch 8mm material stainless steel SKU: 12099005](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-05-b-2-pitch-8mm-material-stainless-steel-sku-12099005/): Material: Stainless steel 1.4301 (AISI 304). With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 05 B-2 pitch 8mm material stainless steel SKU: 12099003](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-05-b-2-pitch-8mm-material-stainless-steel-sku-12099003/): Material: Stainless steel 1.4301 (AISI 304).Sice 06 B-2 with straight link plates. Size 16 B-2 with cottered pin. - [Cranked chain link type 15 / C for double-strand roller chain 05 B-2 pitch 8mm SKU: 12000500](https://maedler.in/product/cranked-chain-link-type-15-c-for-double-strand-roller-chain-05-b-2-pitch-8mm-sku-12000500/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for double-strand roller chain 05 B-2 pitch 8mm SKU: 12000300](https://maedler.in/product/chain-connecting-link-type-11-e-for-double-strand-roller-chain-05-b-2-pitch-8mm-sku-12000300/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steel. - [Cranked chain link type 15 / C for roller chain Lambda 24 B-1 SKU: 11077005L](https://maedler.in/product/cranked-chain-link-type-15-c-for-roller-chain-lambda-24-b-1-sku-11077005l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain Lambda 24 B-1 SKU: 11077004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-lambda-24-b-1-sku-11077004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 10 / S for roller chain Lambda 24B-1 SKU: 11077002L](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-lambda-24b-1-sku-11077002l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels. Special treated pins. With ring coin plate for higher strength. - [Cranked chain link type 12 / L for roller chain Neptune 24 B-1 SKU: 11066004N](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-neptune-24-b-1-sku-11066004n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels , with corrosion protection coating. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Cranked chain link type 12 / L for roller chain similar to 24 B-1 NP pitch 1 1/2x1" nickel-plated SKU: 11066004](https://maedler.in/product/cranked-chain-link-type-12-l-for-roller-chain-similar-to-24-b-1-np-pitch-1-1-2x1-nickel-plated-sku-11066004/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Chain connecting link type 11 / E for roller chain similar to 24 B-1 NP pitch 1 1/2x1" nickel-plated SKU: 11066003](https://maedler.in/product/chain-connecting-link-type-11-e-for-roller-chain-similar-to-24-b-1-np-pitch-1-1-2x1-nickel-plated-sku-11066003/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. Sizes 20 B-1 and 24 B-1 with cottered pin.* Packing units of 5 pieces. - [Chain connecting link type 10 / S for roller chain Neptune 24 B-1 SKU: 11066002N](https://maedler.in/product/chain-connecting-link-type-10-s-for-roller-chain-neptune-24-b-1-sku-11066002n/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, with corrosion protection coating. - [Inner chain link type 4 / B for roller chain similar to 24 B NP pitch 1 1/2x1" nickel-plated SKU: 11066001](https://maedler.in/product/inner-chain-link-type-4-b-for-roller-chain-similar-to-24-b-np-pitch-1-1-2x1-nickel-plated-sku-11066001/): ' Similar to DIN ISO 606 (ex DIN 8187).Material: Special Chain Steel, Nickel-Plated. - [Ball flange bearing UCFA 202 bore 15mm material grey cast iron SKU: 62631500](https://maedler.in/product/ball-flange-bearing-ucfa-202-bore-15mm-material-grey-cast-iron-sku-62631500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFA 201 bore 12mm material grey cast iron SKU: 62631200](https://maedler.in/product/ball-flange-bearing-ucfa-201-bore-12mm-material-grey-cast-iron-sku-62631200/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 218 bore 90mm material grey cast iron SKU: 62629000](https://maedler.in/product/ball-pillow-block-bearing-ucfc-218-bore-90mm-material-grey-cast-iron-sku-62629000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 217 bore 85mm material grey cast iron SKU: 62628500](https://maedler.in/product/ball-pillow-block-bearing-ucfc-217-bore-85mm-material-grey-cast-iron-sku-62628500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 216 bore 80mm material grey cast iron SKU: 62628000](https://maedler.in/product/ball-pillow-block-bearing-ucfc-216-bore-80mm-material-grey-cast-iron-sku-62628000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 215 bore 75mm material grey cast iron SKU: 62627500](https://maedler.in/product/ball-pillow-block-bearing-ucfc-215-bore-75mm-material-grey-cast-iron-sku-62627500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 214 bore 70mm material grey cast iron SKU: 62627000](https://maedler.in/product/ball-pillow-block-bearing-ucfc-214-bore-70mm-material-grey-cast-iron-sku-62627000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 213 bore 65mm material grey cast iron SKU: 62626500](https://maedler.in/product/ball-pillow-block-bearing-ucfc-213-bore-65mm-material-grey-cast-iron-sku-62626500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 212 bore 60mm material grey cast iron SKU: 62626000](https://maedler.in/product/ball-pillow-block-bearing-ucfc-212-bore-60mm-material-grey-cast-iron-sku-62626000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 211 bore 55mm material grey cast iron SKU: 62625500](https://maedler.in/product/ball-pillow-block-bearing-ucfc-211-bore-55mm-material-grey-cast-iron-sku-62625500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 210 bore 50mm material grey cast iron SKU: 62625000](https://maedler.in/product/ball-pillow-block-bearing-ucfc-210-bore-50mm-material-grey-cast-iron-sku-62625000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 209 bore 45mm material grey cast iron SKU: 62624500](https://maedler.in/product/ball-pillow-block-bearing-ucfc-209-bore-45mm-material-grey-cast-iron-sku-62624500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 208 bore 40mm material grey cast iron SKU: 62624000](https://maedler.in/product/ball-pillow-block-bearing-ucfc-208-bore-40mm-material-grey-cast-iron-sku-62624000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 207 bore 35mm material grey cast iron SKU: 62623500](https://maedler.in/product/ball-pillow-block-bearing-ucfc-207-bore-35mm-material-grey-cast-iron-sku-62623500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 206 bore 30mm material grey cast iron SKU: 62623000](https://maedler.in/product/ball-pillow-block-bearing-ucfc-206-bore-30mm-material-grey-cast-iron-sku-62623000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 205 bore 25mm material grey cast iron SKU: 62622500](https://maedler.in/product/ball-pillow-block-bearing-ucfc-205-bore-25mm-material-grey-cast-iron-sku-62622500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 204 bore 20mm material grey cast iron SKU: 62622000](https://maedler.in/product/ball-pillow-block-bearing-ucfc-204-bore-20mm-material-grey-cast-iron-sku-62622000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 203 bore 17mm material grey cast iron SKU: 62621700](https://maedler.in/product/ball-pillow-block-bearing-ucfc-203-bore-17mm-material-grey-cast-iron-sku-62621700/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 202 bore 15mm material grey cast iron SKU: 62621500](https://maedler.in/product/ball-pillow-block-bearing-ucfc-202-bore-15mm-material-grey-cast-iron-sku-62621500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball pillow block bearing UCFC 201 bore 12mm material grey cast iron SKU: 62621200](https://maedler.in/product/ball-pillow-block-bearing-ucfc-201-bore-12mm-material-grey-cast-iron-sku-62621200/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. Round shape with centring spigot. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [SKF deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm shielded on both sides SKU: 626-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-sku-626-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm shielded on both sides clearance C3 SKU: 626-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-clearance-c3-sku-626-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm sealed on both sides SKU: 626-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-sku-626-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm sealed on both sides SKU: 626-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-sku-626-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm sealed on both sides clearance C3 SKU: 626-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-clearance-c3-sku-626-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm sealed on both sides clearance C3 SKU: 626-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-clearance-c3-sku-626-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Ball flange bearing UCFL 210 bore 50mm material grey cast iron SKU: 62615000](https://maedler.in/product/ball-flange-bearing-ucfl-210-bore-50mm-material-grey-cast-iron-sku-62615000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFL 209 bore 45mm material grey cast iron SKU: 62614500](https://maedler.in/product/ball-flange-bearing-ucfl-209-bore-45mm-material-grey-cast-iron-sku-62614500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFL 208 bore 40mm material grey cast iron SKU: 62614000](https://maedler.in/product/ball-flange-bearing-ucfl-208-bore-40mm-material-grey-cast-iron-sku-62614000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFL 207 bore 35mm material grey cast iron SKU: 62613500](https://maedler.in/product/ball-flange-bearing-ucfl-207-bore-35mm-material-grey-cast-iron-sku-62613500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFL 206 bore 30mm material grey cast iron SKU: 62613000](https://maedler.in/product/ball-flange-bearing-ucfl-206-bore-30mm-material-grey-cast-iron-sku-62613000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFL 205 bore 25mm material grey cast iron SKU: 62612500](https://maedler.in/product/ball-flange-bearing-ucfl-205-bore-25mm-material-grey-cast-iron-sku-62612500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFL 204 bore 20mm material grey cast iron SKU: 62612000](https://maedler.in/product/ball-flange-bearing-ucfl-204-bore-20mm-material-grey-cast-iron-sku-62612000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFL 203 bore 17mm material grey cast iron SKU: 62611700](https://maedler.in/product/ball-flange-bearing-ucfl-203-bore-17mm-material-grey-cast-iron-sku-62611700/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFL 202 bore 15mm material grey cast iron SKU: 62611500](https://maedler.in/product/ball-flange-bearing-ucfl-202-bore-15mm-material-grey-cast-iron-sku-62611500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFL 201 bore 12mm material grey cast iron SKU: 62611200](https://maedler.in/product/ball-flange-bearing-ucfl-201-bore-12mm-material-grey-cast-iron-sku-62611200/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCF 216 bore 80mm material grey cast iron SKU: 62608000](https://maedler.in/product/ball-flange-bearing-ucf-216-bore-80mm-material-grey-cast-iron-sku-62608000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 215 bore 75mm material grey cast iron SKU: 62607500](https://maedler.in/product/ball-flange-bearing-ucf-215-bore-75mm-material-grey-cast-iron-sku-62607500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 214 bore 70mm material grey cast iron SKU: 62607000](https://maedler.in/product/ball-flange-bearing-ucf-214-bore-70mm-material-grey-cast-iron-sku-62607000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 213 bore 65mm material grey cast iron SKU: 62606500](https://maedler.in/product/ball-flange-bearing-ucf-213-bore-65mm-material-grey-cast-iron-sku-62606500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 212 bore 60mm material grey cast iron SKU: 62606000](https://maedler.in/product/ball-flange-bearing-ucf-212-bore-60mm-material-grey-cast-iron-sku-62606000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 211 bore 55mm material grey cast iron SKU: 62605500](https://maedler.in/product/ball-flange-bearing-ucf-211-bore-55mm-material-grey-cast-iron-sku-62605500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 210 bore 50mm material grey cast iron SKU: 62605000](https://maedler.in/product/ball-flange-bearing-ucf-210-bore-50mm-material-grey-cast-iron-sku-62605000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 209 bore 45mm material grey cast iron SKU: 62604500](https://maedler.in/product/ball-flange-bearing-ucf-209-bore-45mm-material-grey-cast-iron-sku-62604500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 208 bore 40mm material grey cast iron SKU: 62604000](https://maedler.in/product/ball-flange-bearing-ucf-208-bore-40mm-material-grey-cast-iron-sku-62604000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 207 bore 35mm material grey cast iron SKU: 62603500](https://maedler.in/product/ball-flange-bearing-ucf-207-bore-35mm-material-grey-cast-iron-sku-62603500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 206 bore 30mm material grey cast iron SKU: 62603000](https://maedler.in/product/ball-flange-bearing-ucf-206-bore-30mm-material-grey-cast-iron-sku-62603000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 205 bore 25mm material grey cast iron SKU: 62602500](https://maedler.in/product/ball-flange-bearing-ucf-205-bore-25mm-material-grey-cast-iron-sku-62602500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 204 bore 20mm material grey cast iron SKU: 62602000](https://maedler.in/product/ball-flange-bearing-ucf-204-bore-20mm-material-grey-cast-iron-sku-62602000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 203 bore 17mm material grey cast iron SKU: 62601700](https://maedler.in/product/ball-flange-bearing-ucf-203-bore-17mm-material-grey-cast-iron-sku-62601700/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 202 bore 15mm material grey cast iron SKU: 62601500](https://maedler.in/product/ball-flange-bearing-ucf-202-bore-15mm-material-grey-cast-iron-sku-62601500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [Ball flange bearing UCF 201 bore 12mm material grey cast iron SKU: 62601200](https://maedler.in/product/ball-flange-bearing-ucf-201-bore-12mm-material-grey-cast-iron-sku-62601200/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 4 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Technical explanations page 390. Delivery with grease nipple. - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm shielded on both sides SKU: 626-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-sku-626-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm shielded on both sides clearance C3 SKU: 626-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-clearance-c3-sku-626-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm open (unsealed) SKU: 626-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-open-unsealed-sku-626-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 6mm outer diameter 19mm width 6mm open (unsealed) clearance C3 SKU: 626-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-19mm-width-6mm-open-unsealed-clearance-c3-sku-626-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Ball pillow block bearing SSUP 005 bore 25mm with eccentric ring housing and bearing stainless steel SKU: 62599725](https://maedler.in/product/ball-pillow-block-bearing-ssup-005-bore-25mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62599725/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSUP 004 bore 20mm with eccentric ring housing and bearing stainless steel SKU: 62599720](https://maedler.in/product/ball-pillow-block-bearing-ssup-004-bore-20mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62599720/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSUP 003 bore 17mm with eccentric ring housing and bearing stainless steel SKU: 62599717](https://maedler.in/product/ball-pillow-block-bearing-ssup-003-bore-17mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62599717/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSUP 002 bore 15mm with eccentric ring housing and bearing stainless steel SKU: 62599715](https://maedler.in/product/ball-pillow-block-bearing-ssup-002-bore-15mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62599715/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSUP 001 bore 12mm with eccentric ring housing and bearing stainless steel SKU: 62599712](https://maedler.in/product/ball-pillow-block-bearing-ssup-001-bore-12mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62599712/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSUP 000 bore 10mm with eccentric ring housing and bearing stainless steel SKU: 62599710](https://maedler.in/product/ball-pillow-block-bearing-ssup-000-bore-10mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62599710/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSKP 005 bore 25mm housing and bearing stainless steel SKU: 62599625](https://maedler.in/product/ball-pillow-block-bearing-sskp-005-bore-25mm-housing-and-bearing-stainless-steel-sku-62599625/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSKP 004 bore 20mm housing and bearing stainless steel SKU: 62599620](https://maedler.in/product/ball-pillow-block-bearing-sskp-004-bore-20mm-housing-and-bearing-stainless-steel-sku-62599620/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSKP 003 bore 17mm housing and bearing stainless steel SKU: 62599617](https://maedler.in/product/ball-pillow-block-bearing-sskp-003-bore-17mm-housing-and-bearing-stainless-steel-sku-62599617/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSKP 002 bore 15mm housing and bearing stainless steel SKU: 62599615](https://maedler.in/product/ball-pillow-block-bearing-sskp-002-bore-15mm-housing-and-bearing-stainless-steel-sku-62599615/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSKP 001 bore 12mm housing and bearing stainless steel SKU: 62599612](https://maedler.in/product/ball-pillow-block-bearing-sskp-001-bore-12mm-housing-and-bearing-stainless-steel-sku-62599612/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSKP 000 bore 10mm housing and bearing stainless steel SKU: 62599610](https://maedler.in/product/ball-pillow-block-bearing-sskp-000-bore-10mm-housing-and-bearing-stainless-steel-sku-62599610/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 210 bore 50mm housing and bearing stainless steel SKU: 62599350](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-210-bore-50mm-housing-and-bearing-stainless-steel-sku-62599350/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 209 bore 45mm housing and bearing stainless steel SKU: 62599345](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-209-bore-45mm-housing-and-bearing-stainless-steel-sku-62599345/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 208 bore 40mm housing and bearing stainless steel SKU: 62599340](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-208-bore-40mm-housing-and-bearing-stainless-steel-sku-62599340/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 207 bore 35mm housing and bearing stainless steel SKU: 62599335](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-207-bore-35mm-housing-and-bearing-stainless-steel-sku-62599335/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 206 bore 30mm housing and bearing stainless steel SKU: 62599330](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-206-bore-30mm-housing-and-bearing-stainless-steel-sku-62599330/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 205 bore 25mm housing and bearing stainless steel SKU: 62599325](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-205-bore-25mm-housing-and-bearing-stainless-steel-sku-62599325/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 204 bore 20mm housing and bearing stainless steel SKU: 62599320](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-204-bore-20mm-housing-and-bearing-stainless-steel-sku-62599320/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 203 bore 17mm housing and bearing stainless steel SKU: 62599317](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-203-bore-17mm-housing-and-bearing-stainless-steel-sku-62599317/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 202 bore 15mm housing and bearing stainless steel SKU: 62599315](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-202-bore-15mm-housing-and-bearing-stainless-steel-sku-62599315/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SS UCPA 201 bore 12mm housing and bearing stainless steel SKU: 62599312](https://maedler.in/product/ball-pillow-block-bearing-ss-ucpa-201-bore-12mm-housing-and-bearing-stainless-steel-sku-62599312/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. * Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing SSBPP 207 bore 35mm bearing and two-part housing from stainless steel SKU: 62599235](https://maedler.in/product/ball-pillow-block-bearing-ssbpp-207-bore-35mm-bearing-and-two-part-housing-from-stainless-steel-sku-62599235/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C). The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball pillow block bearing SSBPP 206 bore 30mm bearing and two-part housing from stainless steel SKU: 62599230](https://maedler.in/product/ball-pillow-block-bearing-ssbpp-206-bore-30mm-bearing-and-two-part-housing-from-stainless-steel-sku-62599230/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C). The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball pillow block bearing SSBPP 205 bore 25mm bearing and two-part housing from stainless steel SKU: 62599225](https://maedler.in/product/ball-pillow-block-bearing-ssbpp-205-bore-25mm-bearing-and-two-part-housing-from-stainless-steel-sku-62599225/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C). The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball pillow block bearing SSBPP 204 bore 20mm bearing and two-part housing from stainless steel SKU: 62599220](https://maedler.in/product/ball-pillow-block-bearing-ssbpp-204-bore-20mm-bearing-and-two-part-housing-from-stainless-steel-sku-62599220/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C). The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball pillow block bearing SSBPP 203 bore 17mm bearing and two-part housing from stainless steel SKU: 62599217](https://maedler.in/product/ball-pillow-block-bearing-ssbpp-203-bore-17mm-bearing-and-two-part-housing-from-stainless-steel-sku-62599217/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C). The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball pillow block bearing SSBPP 202 bore 15mm bearing and two-part housing from stainless steel SKU: 62599215](https://maedler.in/product/ball-pillow-block-bearing-ssbpp-202-bore-15mm-bearing-and-two-part-housing-from-stainless-steel-sku-62599215/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C). The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball pillow block bearing SSBPP 201 bore 12mm bearing and two-part housing from stainless steel SKU: 62599212](https://maedler.in/product/ball-pillow-block-bearing-ssbpp-201-bore-12mm-bearing-and-two-part-housing-from-stainless-steel-sku-62599212/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C). The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball pillow block bearing SSUCP 210 bore 50mm housing and bearing stainless steel SKU: 62599150](https://maedler.in/product/ball-pillow-block-bearing-ssucp-210-bore-50mm-housing-and-bearing-stainless-steel-sku-62599150/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing SSUCP 209 bore 45mm housing and bearing stainless steel SKU: 62599145](https://maedler.in/product/ball-pillow-block-bearing-ssucp-209-bore-45mm-housing-and-bearing-stainless-steel-sku-62599145/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing SSUCP 208 bore 40mm housing and bearing stainless steel SKU: 62599140](https://maedler.in/product/ball-pillow-block-bearing-ssucp-208-bore-40mm-housing-and-bearing-stainless-steel-sku-62599140/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing SSUCP 207 bore 35mm housing and bearing stainless steel SKU: 62599135](https://maedler.in/product/ball-pillow-block-bearing-ssucp-207-bore-35mm-housing-and-bearing-stainless-steel-sku-62599135/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing SSUCP 206 bore 30mm housing and bearing stainless steel SKU: 62599130](https://maedler.in/product/ball-pillow-block-bearing-ssucp-206-bore-30mm-housing-and-bearing-stainless-steel-sku-62599130/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing SSUCP 205 bore 25mm housing and bearing stainless steel SKU: 62599125](https://maedler.in/product/ball-pillow-block-bearing-ssucp-205-bore-25mm-housing-and-bearing-stainless-steel-sku-62599125/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing SSUCP 204 bore 20mm housing and bearing stainless steel SKU: 62599120](https://maedler.in/product/ball-pillow-block-bearing-ssucp-204-bore-20mm-housing-and-bearing-stainless-steel-sku-62599120/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing SSUCP 203 bore 17mm housing and bearing stainless steel SKU: 62599117](https://maedler.in/product/ball-pillow-block-bearing-ssucp-203-bore-17mm-housing-and-bearing-stainless-steel-sku-62599117/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing SSUCP 202 bore 15mm housing and bearing stainless steel SKU: 62599115](https://maedler.in/product/ball-pillow-block-bearing-ssucp-202-bore-15mm-housing-and-bearing-stainless-steel-sku-62599115/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing SSUCP 201 bore 12mm housing and bearing stainless steel SKU: 62599112](https://maedler.in/product/ball-pillow-block-bearing-ssucp-201-bore-12mm-housing-and-bearing-stainless-steel-sku-62599112/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated ith grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews.Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball pillow block bearing UP 005 bore 25mm with eccentric ring material zinc die cast SKU: 62572500](https://maedler.in/product/ball-pillow-block-bearing-up-005-bore-25mm-with-eccentric-ring-material-zinc-die-cast-sku-62572500/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UP 004 bore 20mm with eccentric ring material zinc die cast SKU: 62572000](https://maedler.in/product/ball-pillow-block-bearing-up-004-bore-20mm-with-eccentric-ring-material-zinc-die-cast-sku-62572000/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UP 003 bore 17mm with eccentric ring material zinc die cast SKU: 62571700](https://maedler.in/product/ball-pillow-block-bearing-up-003-bore-17mm-with-eccentric-ring-material-zinc-die-cast-sku-62571700/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UP 002 bore 15mm with eccentric ring material zinc die cast SKU: 62571500](https://maedler.in/product/ball-pillow-block-bearing-up-002-bore-15mm-with-eccentric-ring-material-zinc-die-cast-sku-62571500/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball pillow block bearing UP 001 bore 12mm with eccentric ring material zinc die cast SKU: 62571200](https://maedler.in/product/ball-pillow-block-bearing-up-001-bore-12mm-with-eccentric-ring-material-zinc-die-cast-sku-62571200/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Spider (coupling insert) backlash-free 98 Shore A red size 14 outside diameter 30mm SKU: 60519814](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-14-outside-diameter-30mm-sku-60519814/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 12 outside diameter 25mm SKU: 60519812](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-12-outside-diameter-25mm-sku-60519812/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 55 outside diameter 120mm SKU: 60519255](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-55-outside-diameter-120mm-sku-60519255/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 48 outside diameter 105mm SKU: 60519248](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-48-outside-diameter-105mm-sku-60519248/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 42 outside diameter 95mm SKU: 60519242](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-42-outside-diameter-95mm-sku-60519242/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 38 outside diameter 80mm SKU: 60519238](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-38-outside-diameter-80mm-sku-60519238/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 28 outside diameter 65mm SKU: 60519228](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-28-outside-diameter-65mm-sku-60519228/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 24 outside diameter 55mm SKU: 60519224](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-24-outside-diameter-55mm-sku-60519224/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 19 outside diameter 40mm SKU: 60519219](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-19-outside-diameter-40mm-sku-60519219/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 14 outside diameter 30mm SKU: 60519214](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-14-outside-diameter-30mm-sku-60519214/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 12 outside diameter 25mm SKU: 60519212](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-12-outside-diameter-25mm-sku-60519212/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) fitting to standard and backlash-free 92 Shore A yellow size 9 outside diameter 20mm SKU: 60519209](https://maedler.in/product/spider-coupling-insert-fitting-to-standard-and-backlash-free-92-shore-a-yellow-size-9-outside-diameter-20mm-sku-60519209/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) fitting to standard and backlash-free 92 Shore A yellow size 7 outside diameter 14mm SKU: 60519207](https://maedler.in/product/spider-coupling-insert-fitting-to-standard-and-backlash-free-92-shore-a-yellow-size-7-outside-diameter-14mm-sku-60519207/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 92 Shore A yellow size 5 outside diameter 10mm SKU: 60519205](https://maedler.in/product/spider-coupling-insert-backlash-free-92-shore-a-yellow-size-5-outside-diameter-10mm-sku-60519205/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (coupling insert) backlash-free 64 Shore D green size 55 outside diameter 120mm SKU: 60516455](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-55-outside-diameter-120mm-sku-60516455/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 48 outside diameter 105mm SKU: 60516448](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-48-outside-diameter-105mm-sku-60516448/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 42 outside diameter 95mm SKU: 60516442](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-42-outside-diameter-95mm-sku-60516442/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 38 outside diameter 80mm SKU: 60516438](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-38-outside-diameter-80mm-sku-60516438/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 28 outside diameter 65mm SKU: 60516428](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-28-outside-diameter-65mm-sku-60516428/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 24 outside diameter 55mm SKU: 60516424](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-24-outside-diameter-55mm-sku-60516424/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 19 outside diameter 40mm SKU: 60516419](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-19-outside-diameter-40mm-sku-60516419/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (coupling insert) backlash-free 64 Shore D green size 14 outside diameter 30mm SKU: 60516414](https://maedler.in/product/spider-coupling-insert-backlash-free-64-shore-d-green-size-14-outside-diameter-30mm-sku-60516414/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 95 Shore A red size 100 outside diameter 225mm SKU: 60509895](https://maedler.in/product/spider-coupling-insert-standard-95-shore-a-red-size-100-outside-diameter-225mm-sku-60509895/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 95 Shore A red size 90 outside diameter 200mm SKU: 60509890](https://maedler.in/product/spider-coupling-insert-standard-95-shore-a-red-size-90-outside-diameter-200mm-sku-60509890/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 95 Shore A red size 75 outside diameter 160mm SKU: 60509875](https://maedler.in/product/spider-coupling-insert-standard-95-shore-a-red-size-75-outside-diameter-160mm-sku-60509875/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 95 Shore A red size 65 outside diameter 135mm SKU: 60509865](https://maedler.in/product/spider-coupling-insert-standard-95-shore-a-red-size-65-outside-diameter-135mm-sku-60509865/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 55 outside diameter 120mm SKU: 60509855](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-55-outside-diameter-120mm-sku-60509855/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 48 outside diameter 105mm SKU: 60509848](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-48-outside-diameter-105mm-sku-60509848/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 42 outside diameter 95mm SKU: 60509842](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-42-outside-diameter-95mm-sku-60509842/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 38 outside diameter 80mm SKU: 60509838](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-38-outside-diameter-80mm-sku-60509838/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 28 outside diameter 65mm SKU: 60509828](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-28-outside-diameter-65mm-sku-60509828/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 24 outside diameter 55mm SKU: 60509824](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-24-outside-diameter-55mm-sku-60509824/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 19 outside diameter 40mm SKU: 60509819](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-19-outside-diameter-40mm-sku-60509819/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 98 Shore A red size 14 outside diameter 30mm SKU: 60509814](https://maedler.in/product/spider-coupling-insert-standard-98-shore-a-red-size-14-outside-diameter-30mm-sku-60509814/): Material: Polyurethane, shore hardness 98° A (medium hard), red. From size 65 shore hardness 95° A. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH and RNK and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (Coupling insert) standard 92 Shore A yellow size 100 outside diameter 225mm SKU: 60509295](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-100-outside-diameter-225mm-sku-60509295/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 90 outside diameter 200mm SKU: 60509290](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-90-outside-diameter-200mm-sku-60509290/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 75 outside diameter 160mm SKU: 60509275](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-75-outside-diameter-160mm-sku-60509275/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 65 outside diameter 135mm SKU: 60509265](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-65-outside-diameter-135mm-sku-60509265/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 55 outside diameter 120mm SKU: 60509255](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-55-outside-diameter-120mm-sku-60509255/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 48 outside diameter 105mm SKU: 60509248](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-48-outside-diameter-105mm-sku-60509248/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 42 outside diameter 95mm SKU: 60509242](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-42-outside-diameter-95mm-sku-60509242/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 38 outside diameter 80mm SKU: 60509238](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-38-outside-diameter-80mm-sku-60509238/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 28 outside diameter 65mm SKU: 60509228](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-28-outside-diameter-65mm-sku-60509228/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 24 outside diameter 55mm SKU: 60509224](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-24-outside-diameter-55mm-sku-60509224/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 19 outside diameter 40mm SKU: 60509219](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-19-outside-diameter-40mm-sku-60509219/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 92 Shore A yellow size 14 outside diameter 30mm SKU: 60509214](https://maedler.in/product/spider-coupling-insert-standard-92-shore-a-yellow-size-14-outside-diameter-30mm-sku-60509214/): Material: Polyurethane, shore hardness 92° A (soft), yellow. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR, RNT and foreign parts of the same kind from other suppliers. Soft type, for common usage. Temperature range -40°C to +90°C. Sizes 7 and 9 fit to standard and backlash-free couplings and are delivered in yellow or white, depending on the producer. - [Spider (Coupling insert) standard 64 Shore D green size 100 outside diameter 225mm SKU: 60506495](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-100-outside-diameter-225mm-sku-60506495/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 90 outside diameter 200mm SKU: 60506490](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-90-outside-diameter-200mm-sku-60506490/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 75 outside diameter 160mm SKU: 60506475](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-75-outside-diameter-160mm-sku-60506475/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 65 outside diameter 135mm SKU: 60506465](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-65-outside-diameter-135mm-sku-60506465/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 55 outside diameter 120mm SKU: 60506455](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-55-outside-diameter-120mm-sku-60506455/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 48 outside diameter 105mm SKU: 60506448](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-48-outside-diameter-105mm-sku-60506448/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 42 outside diameter 95mm SKU: 60506442](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-42-outside-diameter-95mm-sku-60506442/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 38 outside diameter 80mm SKU: 60506438](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-38-outside-diameter-80mm-sku-60506438/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 28 outside diameter 65mm SKU: 60506428](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-28-outside-diameter-65mm-sku-60506428/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 24 outside diameter 55mm SKU: 60506424](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-24-outside-diameter-55mm-sku-60506424/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 19 outside diameter 40mm SKU: 60506419](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-19-outside-diameter-40mm-sku-60506419/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) standard 64 Shore D green size 14 outside diameter 30mm SKU: 60506414](https://maedler.in/product/spider-coupling-insert-standard-64-shore-d-green-size-14-outside-diameter-30mm-sku-60506414/): Material: Polyurethane, shore hardness 64° D (hard), green. Spiders (plastic inserts) for elastic couplings (jaw couplings) like RN, RNG, RNI, RNR and foreign parts of the same kind from other suppliers. Hard type, for very high torques at small torsion angle. Temperature range -20°C to +100°C. - [Spider (Coupling insert) for coupling DX and DXA size 100 92 Shore SKU: 60420000](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-100-92-shore-sku-60420000/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 85 92 Shore SKU: 60418500](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-85-92-shore-sku-60418500/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 75 92 Shore SKU: 60417500](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-75-92-shore-sku-60417500/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 65 92 Shore SKU: 60416500](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-65-92-shore-sku-60416500/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 60 92 Shore SKU: 60416000](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-60-92-shore-sku-60416000/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 55 92 Shore SKU: 60415500](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-55-92-shore-sku-60415500/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 48 92 Shore SKU: 60414800](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-48-92-shore-sku-60414800/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 42 92 Shore SKU: 60414200](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-42-92-shore-sku-60414200/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 38 92 Shore SKU: 60413800](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-38-92-shore-sku-60413800/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 32 92 Shore SKU: 60413200](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-32-92-shore-sku-60413200/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 28 92 Shore SKU: 60412800](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-28-92-shore-sku-60412800/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Spider (Coupling insert) for coupling DX and DXA size 24 92 Shore SKU: 60412400](https://maedler.in/product/spider-coupling-insert-for-coupling-dx-and-dxa-size-24-92-shore-sku-60412400/): Material: Polyurethane. Hardness 92° Shore, white colour. Suitable for: Only for coupling DX / DXA and couplings of the same dimensions from other suppliers. (not suitable for RN, RNG, RNI, RNH, RNK, RNR und RNT). Optinally Insert with 98° Shore (blue) on request. - [Mounting device module 5 19°31'42" left handed for gear racks 255603xx 255605xx and 255609xx SKU: 25560000](https://maedler.in/product/mounting-device-module-5-193142-left-handed-for-gear-racks-255603xx-255605xx-and-255609xx-sku-25560000/): Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting. - [Mounting device module 4 19°31'42" left handed for gear racks 254603xx, 254605xx and 254609xx SKU: 25460000](https://maedler.in/product/mounting-device-module-4-193142-left-handed-for-gear-racks-254603xx-254605xx-and-254609xx-sku-25460000/): Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting. - [Mounting device module 3 19°31'42" left handed for gear racks 253603xx, 253605xx and 253609xx SKU: 25360000](https://maedler.in/product/mounting-device-module-3-193142-left-handed-for-gear-racks-253603xx-253605xx-and-253609xx-sku-25360000/): Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting. - [Mounting device module 2 19°31'42" left handed for gear racks 251603xx, 251605xx and 251609xx SKU: 25160000](https://maedler.in/product/mounting-device-module-2-193142-left-handed-for-gear-racks-251603xx-251605xx-and-251609xx-sku-25160000/): Material: High-quality steel. Helical tooth system, left-hand 19° 31' 42''. Milled teeth, tooth quality 8e27. Application: These left-handed racks are designed to be used in combination with our helical-toothed right-handed gear racks to simplify the mounting. - [Cranked chain link type 12 / L for double-strand roller chain Lambda 06 B-2 SKU: 12177004L](https://maedler.in/product/cranked-chain-link-type-12-l-for-double-strand-roller-chain-lambda-06-b-2-sku-12177004l/): According to DIN ISO 606 (ex DIN 8187).Material: Special chain steels, sinter metal bushes. Special treated pins. With cranked links the power and breaking loads of the chain are reduced by 20%. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 60 teeth tooth width 12mm SKU: 20506000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-60-teeth-tooth-width-12mm-sku-20506000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm SKU: 20505000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-50-teeth-tooth-width-12mm-sku-20505000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 45 teeth tooth width 12mm SKU: 20504500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-45-teeth-tooth-width-12mm-sku-20504500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 40 teeth tooth width 12mm SKU: 20504000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-40-teeth-tooth-width-12mm-sku-20504000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1,59 (metrical pitch 5mm) 36 teeth tooth width 12mm SKU: 20503600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-159-metrical-pitch-5mm-36-teeth-tooth-width-12mm-sku-20503600/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 30 teeth tooth width 12mm SKU: 20503000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-30-teeth-tooth-width-12mm-sku-20503000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 25 teeth tooth width 12mm SKU: 20502500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-25-teeth-tooth-width-12mm-sku-20502500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 24 teeth tooth width 12mm SKU: 20502400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-24-teeth-tooth-width-12mm-sku-20502400/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 20 teeth tooth width 12mm SKU: 20502000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-20-teeth-tooth-width-12mm-sku-20502000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm SKU: 20501800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-18-teeth-tooth-width-12mm-sku-20501800/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 15 teeth tooth width 12mm SKU: 20501500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-15-teeth-tooth-width-12mm-sku-20501500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 1.59 (metrical pitch 5mm) 15 teeth tooth width 12mm SKU: 20501200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-59-metrical-pitch-5mm-15-teeth-tooth-width-12mm-sku-20501200/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Loctite 2700, High Strength Thread Locking, Content 50 ml ================================================= Actual safety data sheet from 30.11.2016 on the internet in the section Downloads ================================================= SKU: 14073117](https://maedler.in/product/loctite-2700-high-strength-thread-locking-content-50-ml-actual-safety-data-sheet-from-30-11-2016-on-the-internet-in-the-section-downloads/): Specifications “White” material safety data sheet without hazard symbols. Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 3 hours. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals WRAS (BS 6920): 1104508. High-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates . Slight contamination is tolerated. Its key differentiator is the “White” Material Safety Data Sheet. LOCTITE 2700 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.ApplicationsAll threaded connections which require high durability against strong vibrations and shocks. - [Loctite 2700, High Strength Thread Locking, Content 5 ml ================================================= Actual safety data sheet from 30.11.2016 on the internet in the section Downloads ================================================= SKU: 14073116](https://maedler.in/product/loctite-2700-high-strength-thread-locking-content-5-ml-actual-safety-data-sheet-from-30-11-2016-on-the-internet-in-the-section-downloads/): Specifications “White” material safety data sheet without hazard symbols. Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 3 hours. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals WRAS (BS 6920): 1104508. High-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates . Slight contamination is tolerated. Its key differentiator is the “White” Material Safety Data Sheet. LOCTITE 2700 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.ApplicationsAll threaded connections which require high durability against strong vibrations and shocks. - [Loctite 2400, Middle Strength Thread Locking, Content 50 ml ================================================= Actual safety data sheet from 01.06.2015 on the internet in the section Downloads ================================================= SKU: 14073115](https://maedler.in/product/loctite-2400-middle-strength-thread-locking-content-50-ml-actual-safety-data-sheet-from-01-06-2015-on-the-internet-in-the-section-downloads/): Specifications “White” material safety data sheet without hazard symbols. Thread size: to M36. Strength: Medium. High chemical resistance. Functional strength (Typical value at 22°C): 2 hours. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals WRAS (BS 6920): 1104507. Medium threadlocker formulated to secure and seal bolts, nuts and studs to prevent loosening due to vibration. It works on all metals and passive substrates. Slight contamination by industrial oils, corrosion prevention oils and cutting fluids is tolerated. Its key differentiator is the “White” Material Safety Data Sheet. LOCTITE 2400 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins. ApplicationsAll threaded connections which require high durability against strong vibrations and shocks. - [Loctite 2400, Middle Strength Thread Locking, Content 5 ml ================================================= Actual safety data sheet from 01.06.2015 on the internet in the section Downloads ================================================= SKU: 14073114](https://maedler.in/product/loctite-2400-middle-strength-thread-locking-content-5-ml-actual-safety-data-sheet-from-01-06-2015-on-the-internet-in-the-section-downloads/): Specifications “White” material safety data sheet without hazard symbols. Thread size: to M36. Strength: Medium. High chemical resistance. Functional strength (Typical value at 22°C): 2 hours. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals WRAS (BS 6920): 1104507. Medium threadlocker formulated to secure and seal bolts, nuts and studs to prevent loosening due to vibration. It works on all metals and passive substrates. Slight contamination by industrial oils, corrosion prevention oils and cutting fluids is tolerated. Its key differentiator is the “White” Material Safety Data Sheet. LOCTITE 2400 carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins. ApplicationsAll threaded connections which require high durability against strong vibrations and shocks. - [Replacement chain for chain coupling type 6020 12 A-2 length 20 links including spring clip link SKU: 14036120](https://maedler.in/product/replacement-chain-for-chain-coupling-type-6020-12-a-2-length-20-links-including-spring-clip-link-sku-14036120/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 6018 12 A-2 length 18 links including spring clip link SKU: 14036118](https://maedler.in/product/replacement-chain-for-chain-coupling-type-6018-12-a-2-length-18-links-including-spring-clip-link-sku-14036118/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 5018 10 A-2 length 18 links including spring clip link SKU: 14035118](https://maedler.in/product/replacement-chain-for-chain-coupling-type-5018-10-a-2-length-18-links-including-spring-clip-link-sku-14035118/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 5016 10 A-2 length 16 links including spring clip link SKU: 14035116](https://maedler.in/product/replacement-chain-for-chain-coupling-type-5016-10-a-2-length-16-links-including-spring-clip-link-sku-14035116/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 5014 10 A-2 length 14 links including spring clip link SKU: 14035114](https://maedler.in/product/replacement-chain-for-chain-coupling-type-5014-10-a-2-length-14-links-including-spring-clip-link-sku-14035114/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 4016 08 A-2 length 16 links including spring clip link SKU: 14034116](https://maedler.in/product/replacement-chain-for-chain-coupling-type-4016-08-a-2-length-16-links-including-spring-clip-link-sku-14034116/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 4014 08 A-2 length 14 links including spring clip link SKU: 14034114](https://maedler.in/product/replacement-chain-for-chain-coupling-type-4014-08-a-2-length-14-links-including-spring-clip-link-sku-14034114/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 4012 08 A-2 length 12 links including spring clip link SKU: 14034112](https://maedler.in/product/replacement-chain-for-chain-coupling-type-4012-08-a-2-length-12-links-including-spring-clip-link-sku-14034112/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Replacement chain for chain coupling type 3012 06 B-2 length 12 links including spring clip link SKU: 14033112](https://maedler.in/product/replacement-chain-for-chain-coupling-type-3012-06-b-2-length-12-links-including-spring-clip-link-sku-14033112/): Material: Steel. With connection link with clip. These chains fit only for chain couplings with casing, types 3012 to 6020. - [Ball flange bearing SSBPF 205 bore 25mm bearing and two-part housing from stainless steel SKU: 62699425](https://maedler.in/product/ball-flange-bearing-ssbpf-205-bore-25mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699425/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPF 204 bore 20mm bearing and two-part housing from stainless steel SKU: 62699420](https://maedler.in/product/ball-flange-bearing-ssbpf-204-bore-20mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699420/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPF 203 bore 17mm bearing and two-part housing from stainless steel SKU: 62699417](https://maedler.in/product/ball-flange-bearing-ssbpf-203-bore-17mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699417/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPF 202 bore 15mm bearing and two-part housing from stainless steel SKU: 62699415](https://maedler.in/product/ball-flange-bearing-ssbpf-202-bore-15mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699415/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPF 201 bore 12mm bearing and two-part housing from stainless steel SKU: 62699412](https://maedler.in/product/ball-flange-bearing-ssbpf-201-bore-12mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699412/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSUCFL 210 bore 50mm housing and bearing stainless steel SKU: 62699150](https://maedler.in/product/ball-flange-bearing-ssucfl-210-bore-50mm-housing-and-bearing-stainless-steel-sku-62699150/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCFL 209 bore 45mm housing and bearing stainless steel SKU: 62699145](https://maedler.in/product/ball-flange-bearing-ssucfl-209-bore-45mm-housing-and-bearing-stainless-steel-sku-62699145/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCFL 208 bore 40mm housing and bearing stainless steel SKU: 62699140](https://maedler.in/product/ball-flange-bearing-ssucfl-208-bore-40mm-housing-and-bearing-stainless-steel-sku-62699140/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCFL 207 bore 35mm housing and bearing stainless steel SKU: 62699135](https://maedler.in/product/ball-flange-bearing-ssucfl-207-bore-35mm-housing-and-bearing-stainless-steel-sku-62699135/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCFL 206 bore 30mm housing and bearing stainless steel SKU: 62699130](https://maedler.in/product/ball-flange-bearing-ssucfl-206-bore-30mm-housing-and-bearing-stainless-steel-sku-62699130/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCFL 205 bore 25mm housing and bearing stainless steel SKU: 62699125](https://maedler.in/product/ball-flange-bearing-ssucfl-205-bore-25mm-housing-and-bearing-stainless-steel-sku-62699125/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C). With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCFL 204 bore 20mm housing and bearing stainless steel SKU: 62699120](https://maedler.in/product/ball-flange-bearing-ssucfl-204-bore-20mm-housing-and-bearing-stainless-steel-sku-62699120/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCFL 203 bore 17mm housing and bearing stainless steel SKU: 62699117](https://maedler.in/product/ball-flange-bearing-ssucfl-203-bore-17mm-housing-and-bearing-stainless-steel-sku-62699117/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCFL 202 bore 15mm housing and bearing stainless steel SKU: 62699115](https://maedler.in/product/ball-flange-bearing-ssucfl-202-bore-15mm-housing-and-bearing-stainless-steel-sku-62699115/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCFL 201 bore 12mm housing and bearing stainless steel SKU: 62699112](https://maedler.in/product/ball-flange-bearing-ssucfl-201-bore-12mm-housing-and-bearing-stainless-steel-sku-62699112/): Material: Housing: Stainless steel 1.4301 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 210 bore 50mm housing and bearing stainless steel SKU: 62699050](https://maedler.in/product/ball-flange-bearing-ssucf-210-bore-50mm-housing-and-bearing-stainless-steel-sku-62699050/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 209 bore 45mm housing and bearing stainless steel SKU: 62699045](https://maedler.in/product/ball-flange-bearing-ssucf-209-bore-45mm-housing-and-bearing-stainless-steel-sku-62699045/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 208 bore 40mm housing and bearing stainless steel SKU: 62699040](https://maedler.in/product/ball-flange-bearing-ssucf-208-bore-40mm-housing-and-bearing-stainless-steel-sku-62699040/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 207 bore 35mm housing and bearing stainless steel SKU: 62699035](https://maedler.in/product/ball-flange-bearing-ssucf-207-bore-35mm-housing-and-bearing-stainless-steel-sku-62699035/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 206 bore 30mm housing and bearing stainless steel SKU: 62699030](https://maedler.in/product/ball-flange-bearing-ssucf-206-bore-30mm-housing-and-bearing-stainless-steel-sku-62699030/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 205 bore 25mm housing and bearing stainless steel SKU: 62699025](https://maedler.in/product/ball-flange-bearing-ssucf-205-bore-25mm-housing-and-bearing-stainless-steel-sku-62699025/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 204 bore 20mm housing and bearing stainless steel SKU: 62699020](https://maedler.in/product/ball-flange-bearing-ssucf-204-bore-20mm-housing-and-bearing-stainless-steel-sku-62699020/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 203 bore 17mm housing and bearing stainless steel SKU: 62699017](https://maedler.in/product/ball-flange-bearing-ssucf-203-bore-17mm-housing-and-bearing-stainless-steel-sku-62699017/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 202 bore 15mm housing and bearing stainless steel SKU: 62699015](https://maedler.in/product/ball-flange-bearing-ssucf-202-bore-15mm-housing-and-bearing-stainless-steel-sku-62699015/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing SSUCF 201 bore 12mm housing and bearing stainless steel SKU: 62699012](https://maedler.in/product/ball-flange-bearing-ssucf-201-bore-12mm-housing-and-bearing-stainless-steel-sku-62699012/): Material: Housing: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing UFL 005 bore 25mm with eccentric ring material zinc die cast SKU: 62672500](https://maedler.in/product/ball-flange-bearing-ufl-005-bore-25mm-with-eccentric-ring-material-zinc-die-cast-sku-62672500/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing UFL 004 bore 20mm with eccentric ring material zinc die cast SKU: 62672000](https://maedler.in/product/ball-flange-bearing-ufl-004-bore-20mm-with-eccentric-ring-material-zinc-die-cast-sku-62672000/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing UFL 003 bore 17mm with eccentric ring material zinc die cast SKU: 62671700](https://maedler.in/product/ball-flange-bearing-ufl-003-bore-17mm-with-eccentric-ring-material-zinc-die-cast-sku-62671700/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing UFL 002 bore 15mm with eccentric ring material zinc die cast SKU: 62671500](https://maedler.in/product/ball-flange-bearing-ufl-002-bore-15mm-with-eccentric-ring-material-zinc-die-cast-sku-62671500/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing UFL 001 bore 12mm with eccentric ring material zinc die cast SKU: 62671200](https://maedler.in/product/ball-flange-bearing-ufl-001-bore-12mm-with-eccentric-ring-material-zinc-die-cast-sku-62671200/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing UFL 000 bore 10mm with eccentric ring material zinc die cast SKU: 62671000](https://maedler.in/product/ball-flange-bearing-ufl-000-bore-10mm-with-eccentric-ring-material-zinc-die-cast-sku-62671000/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing KFL 005 bore 25mm material zinc die cast SKU: 62662500](https://maedler.in/product/ball-flange-bearing-kfl-005-bore-25mm-material-zinc-die-cast-sku-62662500/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing KFL 004 bore 20mm material zinc die cast SKU: 62662000](https://maedler.in/product/ball-flange-bearing-kfl-004-bore-20mm-material-zinc-die-cast-sku-62662000/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing KFL 003 bore 17mm material zinc die cast SKU: 62661700](https://maedler.in/product/ball-flange-bearing-kfl-003-bore-17mm-material-zinc-die-cast-sku-62661700/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing KFL 002 bore 15mm material zinc die cast SKU: 62661500](https://maedler.in/product/ball-flange-bearing-kfl-002-bore-15mm-material-zinc-die-cast-sku-62661500/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions. 1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing KFL 001 bore 12mm material zinc die cast SKU: 62661200](https://maedler.in/product/ball-flange-bearing-kfl-001-bore-12mm-material-zinc-die-cast-sku-62661200/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing KFL 000 bore 10mm material zinc die cast SKU: 62661000](https://maedler.in/product/ball-flange-bearing-kfl-000-bore-10mm-material-zinc-die-cast-sku-62661000/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing KFL 08 bore 8mm material zinc die cast SKU: 62660800](https://maedler.in/product/ball-flange-bearing-kfl-08-bore-8mm-material-zinc-die-cast-sku-62660800/): Material: Housing: from Zinc die cast, Rolling bearing: from bearing steel.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing TUCFL 210 bore 50mm housing from thermoplast white bearing stainless steel SKU: 62656150](https://maedler.in/product/ball-flange-bearing-tucfl-210-bore-50mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656150/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 209 bore 45mm housing from thermoplast white bearing stainless steel SKU: 62656145](https://maedler.in/product/ball-flange-bearing-tucfl-209-bore-45mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656145/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 208 bore 40mm housing from thermoplast white bearing stainless steel SKU: 62656140](https://maedler.in/product/ball-flange-bearing-tucfl-208-bore-40mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656140/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 207 bore 35mm housing from thermoplast white bearing stainless steel SKU: 62656135](https://maedler.in/product/ball-flange-bearing-tucfl-207-bore-35mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656135/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 206 bore 30mm housing from thermoplast white bearing stainless steel SKU: 62656130](https://maedler.in/product/ball-flange-bearing-tucfl-206-bore-30mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656130/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 205 bore 25mm housing from thermoplast white bearing stainless steel SKU: 62656125](https://maedler.in/product/ball-flange-bearing-tucfl-205-bore-25mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656125/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 204 bore 20mm housing from thermoplast white bearing stainless steel SKU: 62656120](https://maedler.in/product/ball-flange-bearing-tucfl-204-bore-20mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656120/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 203 bore 17mm housing from thermoplast white bearing stainless steel SKU: 62656117](https://maedler.in/product/ball-flange-bearing-tucfl-203-bore-17mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656117/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 202 bore 15mm housing from thermoplast white bearing stainless steel SKU: 62656115](https://maedler.in/product/ball-flange-bearing-tucfl-202-bore-15mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656115/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 201 bore 12mm housing from thermoplast white bearing stainless steel SKU: 62656112](https://maedler.in/product/ball-flange-bearing-tucfl-201-bore-12mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656112/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 210 bore 50mm housing from thermoplast white bearing stainless steel SKU: 62656050](https://maedler.in/product/ball-flange-bearing-tucf-210-bore-50mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656050/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 209 bore 45mm housing from thermoplast white bearing stainless steel SKU: 62656045](https://maedler.in/product/ball-flange-bearing-tucf-209-bore-45mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656045/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 208 bore 40mm housing from thermoplast white bearing stainless steel SKU: 62656040](https://maedler.in/product/ball-flange-bearing-tucf-208-bore-40mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656040/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 207 bore 35mm housing from thermoplast white bearing stainless steel SKU: 62656035](https://maedler.in/product/ball-flange-bearing-tucf-207-bore-35mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656035/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 206 bore 30mm housing from thermoplast white bearing stainless steel SKU: 62656030](https://maedler.in/product/ball-flange-bearing-tucf-206-bore-30mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656030/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 205 bore 25mm housing from thermoplast white bearing stainless steel SKU: 62656025](https://maedler.in/product/ball-flange-bearing-tucf-205-bore-25mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656025/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 204 bore 20mm housing from thermoplast white bearing stainless steel SKU: 62656020](https://maedler.in/product/ball-flange-bearing-tucf-204-bore-20mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656020/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 203 bore 17mm housing from thermoplast white bearing stainless steel SKU: 62656017](https://maedler.in/product/ball-flange-bearing-tucf-203-bore-17mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656017/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 202 bore 15mm housing from thermoplast white bearing stainless steel SKU: 62656015](https://maedler.in/product/ball-flange-bearing-tucf-202-bore-15mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656015/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 201 bore 12mm housing from thermoplast white bearing stainless steel SKU: 62656012](https://maedler.in/product/ball-flange-bearing-tucf-201-bore-12mm-housing-from-thermoplast-white-bearing-stainless-steel-sku-62656012/): Material: Housing: Thermoplast PBT, white.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 210 bore 50mm housing from thermoplast black bearing stainless steel SKU: 62655150](https://maedler.in/product/ball-flange-bearing-tucfl-210-bore-50mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655150/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 209 bore 45mm housing from thermoplast black bearing stainless steel SKU: 62655145](https://maedler.in/product/ball-flange-bearing-tucfl-209-bore-45mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655145/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 208 bore 40mm housing from thermoplast black bearing stainless steel SKU: 62655140](https://maedler.in/product/ball-flange-bearing-tucfl-208-bore-40mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655140/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 207 bore 35mm housing from thermoplast black bearing stainless steel SKU: 62655135](https://maedler.in/product/ball-flange-bearing-tucfl-207-bore-35mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655135/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 206 bore 30mm housing from thermoplast black bearing stainless steel SKU: 62655130](https://maedler.in/product/ball-flange-bearing-tucfl-206-bore-30mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655130/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 205 bore 25mm housing from thermoplast black bearing stainless steel SKU: 62655125](https://maedler.in/product/ball-flange-bearing-tucfl-205-bore-25mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655125/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 204 bore 20mm housing from thermoplast black bearing stainless steel SKU: 62655120](https://maedler.in/product/ball-flange-bearing-tucfl-204-bore-20mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655120/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 203 bore 17mm housing from thermoplast black bearing stainless steel SKU: 62655117](https://maedler.in/product/ball-flange-bearing-tucfl-203-bore-17mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655117/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 202 bore 15mm housing from thermoplast black bearing stainless steel SKU: 62655115](https://maedler.in/product/ball-flange-bearing-tucfl-202-bore-15mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655115/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCFL 201 bore 12mm housing from thermoplast black bearing stainless steel SKU: 62655112](https://maedler.in/product/ball-flange-bearing-tucfl-201-bore-12mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655112/): Material: Housing: Thermoplast PBT, black.Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 2 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 210 bore 50mm housing from thermoplast black bearing stainless steel SKU: 62655050](https://maedler.in/product/ball-flange-bearing-tucf-210-bore-50mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655050/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 209 bore 45mm housing from thermoplast black bearing stainless steel SKU: 62655045](https://maedler.in/product/ball-flange-bearing-tucf-209-bore-45mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655045/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 208 bore 40mm housing from thermoplast black bearing stainless steel SKU: 62655040](https://maedler.in/product/ball-flange-bearing-tucf-208-bore-40mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655040/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 207 bore 35mm housing from thermoplast black bearing stainless steel SKU: 62655035](https://maedler.in/product/ball-flange-bearing-tucf-207-bore-35mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655035/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 206 bore 30mm housing from thermoplast black bearing stainless steel SKU: 62655030](https://maedler.in/product/ball-flange-bearing-tucf-206-bore-30mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655030/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 205 bore 25mm housing from thermoplast black bearing stainless steel SKU: 62655025](https://maedler.in/product/ball-flange-bearing-tucf-205-bore-25mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655025/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 204 bore 20mm housing from thermoplast black bearing stainless steel SKU: 62655020](https://maedler.in/product/ball-flange-bearing-tucf-204-bore-20mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655020/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 203 bore 17mm housing from thermoplast black bearing stainless steel SKU: 62655017](https://maedler.in/product/ball-flange-bearing-tucf-203-bore-17mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655017/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 202 bore 15mm housing from thermoplast black bearing stainless steel SKU: 62655015](https://maedler.in/product/ball-flange-bearing-tucf-202-bore-15mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655015/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing TUCF 201 bore 12mm housing from thermoplast black bearing stainless steel SKU: 62655012](https://maedler.in/product/ball-flange-bearing-tucf-201-bore-12mm-housing-from-thermoplast-black-bearing-stainless-steel-sku-62655012/): Material: Housing: Thermoplast PBT, black. Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C).With 4 mounting holes.The rolling bearing can be swiveled when mounting to compensate shaft misalignement.The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.Delivery with stainless steel grease nipple. - [Ball flange bearing BPFL 207 bore 35mm two-part steel sheet, zinc-plated SKU: 62653500](https://maedler.in/product/ball-flange-bearing-bpfl-207-bore-35mm-two-part-steel-sheet-zinc-plated-sku-62653500/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPFL 206 bore 30mm two-part steel sheet, zinc-plated SKU: 62653000](https://maedler.in/product/ball-flange-bearing-bpfl-206-bore-30mm-two-part-steel-sheet-zinc-plated-sku-62653000/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPFL 205 bore 25mm two-part steel sheet, zinc-plated SKU: 62652500](https://maedler.in/product/ball-flange-bearing-bpfl-205-bore-25mm-two-part-steel-sheet-zinc-plated-sku-62652500/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPFL 204 bore 20mm two-part steel sheet, zinc-plated SKU: 62652000](https://maedler.in/product/ball-flange-bearing-bpfl-204-bore-20mm-two-part-steel-sheet-zinc-plated-sku-62652000/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPFL 203 bore 17mm two-part steel sheet, zinc-plated SKU: 62651700](https://maedler.in/product/ball-flange-bearing-bpfl-203-bore-17mm-two-part-steel-sheet-zinc-plated-sku-62651700/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPFL 202 bore 15mm two-part steel sheet, zinc-plated SKU: 62651500](https://maedler.in/product/ball-flange-bearing-bpfl-202-bore-15mm-two-part-steel-sheet-zinc-plated-sku-62651500/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPFL 201 bore 12mm two-part steel sheet, zinc-plated SKU: 62651200](https://maedler.in/product/ball-flange-bearing-bpfl-201-bore-12mm-two-part-steel-sheet-zinc-plated-sku-62651200/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPF 207 bore 35mm two-part steel sheet, zinc-plated SKU: 62643500](https://maedler.in/product/ball-flange-bearing-bpf-207-bore-35mm-two-part-steel-sheet-zinc-plated-sku-62643500/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPF 206 bore 30mm two-part steel sheet, zinc-plated SKU: 62643000](https://maedler.in/product/ball-flange-bearing-bpf-206-bore-30mm-two-part-steel-sheet-zinc-plated-sku-62643000/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPF 205 bore 25mm two-part steel sheet, zinc-plated SKU: 62642500](https://maedler.in/product/ball-flange-bearing-bpf-205-bore-25mm-two-part-steel-sheet-zinc-plated-sku-62642500/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPF 204 bore 20mm two-part steel sheet, zinc-plated SKU: 62642000](https://maedler.in/product/ball-flange-bearing-bpf-204-bore-20mm-two-part-steel-sheet-zinc-plated-sku-62642000/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPF 203 bore 17mm two-part steel sheet, zinc-plated SKU: 62641700](https://maedler.in/product/ball-flange-bearing-bpf-203-bore-17mm-two-part-steel-sheet-zinc-plated-sku-62641700/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPF 202 bore 15mm two-part steel sheet, zinc-plated SKU: 62641500](https://maedler.in/product/ball-flange-bearing-bpf-202-bore-15mm-two-part-steel-sheet-zinc-plated-sku-62641500/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing BPF 201 bore 12mm two-part steel sheet, zinc-plated SKU: 62641200](https://maedler.in/product/ball-flange-bearing-bpf-201-bore-12mm-two-part-steel-sheet-zinc-plated-sku-62641200/): Material: Housing from two-part steel sheets, zinc-plated. Rolling bearing from bearing steel. With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing UCFA 210 bore 50mm material grey cast iron SKU: 62635000](https://maedler.in/product/ball-flange-bearing-ucfa-210-bore-50mm-material-grey-cast-iron-sku-62635000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFA 209 bore 45mm material grey cast iron SKU: 62634500](https://maedler.in/product/ball-flange-bearing-ucfa-209-bore-45mm-material-grey-cast-iron-sku-62634500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFA 208 bore 40mm material grey cast iron SKU: 62634000](https://maedler.in/product/ball-flange-bearing-ucfa-208-bore-40mm-material-grey-cast-iron-sku-62634000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFA 207 bore 35mm material grey cast iron SKU: 62633500](https://maedler.in/product/ball-flange-bearing-ucfa-207-bore-35mm-material-grey-cast-iron-sku-62633500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFA 206 bore 30mm material grey cast iron SKU: 62633000](https://maedler.in/product/ball-flange-bearing-ucfa-206-bore-30mm-material-grey-cast-iron-sku-62633000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFA 205 bore 25mm material grey cast iron SKU: 62632500](https://maedler.in/product/ball-flange-bearing-ucfa-205-bore-25mm-material-grey-cast-iron-sku-62632500/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFA 204 bore 20mm material grey cast iron SKU: 62632000](https://maedler.in/product/ball-flange-bearing-ucfa-204-bore-20mm-material-grey-cast-iron-sku-62632000/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Ball flange bearing UCFA 203 bore 17mm material grey cast iron SKU: 62631700](https://maedler.in/product/ball-flange-bearing-ucfa-203-bore-17mm-material-grey-cast-iron-sku-62631700/): Material: Housing from grey cast iron. Rolling bearing from bearing steel. With 2 mounting holes, one of them slotted. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible. Delivery with grease nipple. - [Roller chain with bent attachments 08 B-1-K2 2xp attachments wide version on one side SKU: 10500021](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10500021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 6xp attachments slim version on both sides SKU: 10500006](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10500006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 6xp attachments slim version on one side SKU: 10500005](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10500005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 4xp attachments slim version on both sides SKU: 10500004](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10500004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 4xp attachments slim version on one side SKU: 10500003](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10500003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 2xp attachments slim version on both sides SKU: 10500002](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10500002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K1 2xp attachments slim version on one side SKU: 10500001](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10500001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain connecting link type 11 / E with straight attachments 06 B-1-M2 attachments wide version on both sides stainless steel 1.4301 SKU: 10199352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10199352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M2 attachments wide version on one side stainless steel 1.4301 SKU: 10199351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10199351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10199332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10199332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10199331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10199331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K2 attachments wide version on both sides stainless steel SKU: 10199322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-sku-10199322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10199321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10199321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K1 attachments slim version on both side stainless steel 1.4301 SKU: 10199302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k1-attachments-slim-version-on-both-side-stainless-steel-1-4301-sku-10199302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10199301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10199301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 06 B-1-M2, 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10199052](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10199052/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with straight attachments 06 B-1-M2, 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10199051](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10199051/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with bent attachments 06 B-1-K2, 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10199022](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10199022/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Roller chain with bent attachments 06 B-1-K2, 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10199021](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10199021/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Chain connecting link type 11 / E with straight attachments 06 B-1-M2 attachments wide version on both sides SKU: 10100352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m2-attachments-wide-version-on-both-sides-sku-10100352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M2 attachments wide version on one side SKU: 10100351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m2-attachments-wide-version-on-one-side-sku-10100351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M1 attachments slim version on both sides SKU: 10100332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m1-attachments-slim-version-on-both-sides-sku-10100332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 06 B-1-M1 attachments slim version on one side SKU: 10100331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-06-b-1-m1-attachments-slim-version-on-one-side-sku-10100331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 06 B-1-K2 attachments wide version on both sides SKU: 10100322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k2-attachments-wide-version-on-both-sides-sku-10100322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K2 attachments wide version on one side SKU: 10100321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k2-attachments-wide-version-on-one-side-sku-10100321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K1 attachments slim version on both side SKU: 10100302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k1-attachments-slim-version-on-both-side-sku-10100302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 06 B-1-K1 attachments slim version on one side SKU: 10100301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-06-b-1-k1-attachments-slim-version-on-one-side-sku-10100301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 06 B-1-M2, 6xp attachments wide version on both sides SKU: 10100056](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10100056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 6xp attachments wide version on one side SKU: 10100055](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10100055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 4xp attachments wide version on both sides SKU: 10100054](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10100054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 4xp attachments wide version on one side SKU: 10100053](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10100053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 2xp attachments wide version on both sides SKU: 10100052](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10100052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M2, 2xp attachments wide version on one side SKU: 10100051](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10100051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 6xp attachments slim version on both sides SKU: 10100036](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10100036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 6xp attachments slim version on one side SKU: 10100035](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10100035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 4xp attachments slim version on both sides SKU: 10100034](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10100034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 4xp attachments slim version on one side SKU: 10100033](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10100033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 2xp attachments slim version on both sides SKU: 10100032](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10100032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 06 B-1-M1, 2xp attachments slim version on one side SKU: 10100031](https://maedler.in/product/roller-chain-with-straight-attachments-06-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10100031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 6xp attachments wide version on both sides SKU: 10100026](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10100026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 6xp attachments wide version on one side SKU: 10100025](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10100025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 4xp attachments wide version on both sides SKU: 10100024](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10100024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 4xp attachments wide version on one side SKU: 10100023](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10100023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 2xp attachments wide version on both sides SKU: 10100022](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10100022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K2, 2xp attachments wide version on one side SKU: 10100021](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10100021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 6xp attachments slim version on both sides SKU: 10100006](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10100006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 6xp attachments slim version on one side SKU: 10100005](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10100005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 4xp attachments slim version on both sides SKU: 10100004](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10100004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 4xp attachments slim version on one side SKU: 10100003](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10100003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 2xp attachments slim version on both sides SKU: 10100002](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10100002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 06 B-1-K1, 2xp attachments slim version on one side SKU: 10100001](https://maedler.in/product/roller-chain-with-bent-attachments-06-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10100001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00 SKU: 61240200](https://maedler.in/product/face-spanner-for-two-hole-round-nuts-matching-with-den-sliding-hub-roba-n-612-400-00-and-612-420-00-sku-61240200/): Material: Special Steel, burnished. - [Face spanner for two-hole round nuts matching with sliding hub ROBA 612 380 00 SKU: 61238200](https://maedler.in/product/face-spanner-for-two-hole-round-nuts-matching-with-sliding-hub-roba-612-380-00-sku-61238200/): Material: Special Steel, burnished. - [Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 340 00 and 612 360 00 SKU: 61234200](https://maedler.in/product/face-spanner-for-two-hole-round-nuts-matching-with-den-sliding-hub-roba-n-612-340-00-and-612-360-00-sku-61234200/): Material: Special Steel, burnished. - [Adjustable pin wrench matching with sliding hub ROBA 61231000 and 61232000 SKU: 61231200](https://maedler.in/product/adjustable-pin-wrench-matching-with-sliding-hub-roba-61231000-and-61232000-sku-61231200/): Material: Special Steel, burnished. - [Face spanner for two-hole round nuts matching with sliding hub ROBA 612 300 00 SKU: 61230200](https://maedler.in/product/face-spanner-for-two-hole-round-nuts-matching-with-sliding-hub-roba-612-300-00-sku-61230200/): Material: Special Steel, burnished. - [Disk spring set for sliding hub FA size 8 (32 springs outer diameter 40mm) SKU: 61210802](https://maedler.in/product/disk-spring-set-for-sliding-hub-fa-size-8-32-springs-outer-diameter-40mm-sku-61210802/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring set for sliding hub FA size 7 (24 springs outer diameter 40mm) SKU: 61210702](https://maedler.in/product/disk-spring-set-for-sliding-hub-fa-size-7-24-springs-outer-diameter-40mm-sku-61210702/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring set for sliding hub FA size 6 (16 springs outer diameter 40mm) SKU: 61210602](https://maedler.in/product/disk-spring-set-for-sliding-hub-fa-size-6-16-springs-outer-diameter-40mm-sku-61210602/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA size 5 outer diameter 157.5mm SKU: 61210502](https://maedler.in/product/disk-spring-for-sliding-hub-fa-size-5-outer-diameter-157-5mm-sku-61210502/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA size 4 outer diameter 128.8mm SKU: 61210402](https://maedler.in/product/disk-spring-for-sliding-hub-fa-size-4-outer-diameter-128-8mm-sku-61210402/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA size 3 outer diameter 102mm SKU: 61210302](https://maedler.in/product/disk-spring-for-sliding-hub-fa-size-3-outer-diameter-102mm-sku-61210302/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and FA-K and RNR size 2 outer diameter 79.5mm SKU: 61210202](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-fa-k-and-rnr-size-2-outer-diameter-79-5mm-sku-61210202/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and FA-K and RNR size 1 outer diameter 61.5mm SKU: 61210112](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-fa-k-and-rnr-size-1-outer-diameter-61-5mm-sku-61210112/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and FA-K and RNR size 01 outer diameter 53.2mm SKU: 61210102](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-fa-k-and-rnr-size-01-outer-diameter-53-2mm-sku-61210102/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and FA-K and RNR size 0 outer diameter 42.5mm SKU: 61210012](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-fa-k-and-rnr-size-0-outer-diameter-42-5mm-sku-61210012/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Disk spring for sliding hub FA and RNR size 00 outer diameter 30mm SKU: 61210002](https://maedler.in/product/disk-spring-for-sliding-hub-fa-and-rnr-size-00-outer-diameter-30mm-sku-61210002/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling.Material: Special spring-steel.Delivery per piece.At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring.At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring.The minimum torque setting is then approx. 65% of the maximum value. - [Adjusting nut for sliding hub FS 612070-612080 SKU: 61207700](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-612070-612080-sku-61207700/): Material: Steel, zinc-plated and passivated. - [Plate spring for sliding hub FS 612070-612080 SKU: 61207600](https://maedler.in/product/plate-spring-for-sliding-hub-fs-612070-612080-sku-61207600/): Material: Special spring-steel. Delivery per piece. - [Bush 22mm for sliding hub FS 612070-612080 SKU: 61207400](https://maedler.in/product/bush-22mm-for-sliding-hub-fs-612070-612080-sku-61207400/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 20,6mm for sliding hub FS 612070-612080 SKU: 61207300](https://maedler.in/product/bush-206mm-for-sliding-hub-fs-612070-612080-sku-61207300/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 17mm for sliding hub FS 612070-612080 SKU: 61207200](https://maedler.in/product/bush-17mm-for-sliding-hub-fs-612070-612080-sku-61207200/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Stellmuttter for sliding hub FS 612050-612060 SKU: 61205700](https://maedler.in/product/stellmuttter-for-sliding-hub-fs-612050-612060-sku-61205700/): Material: Steel, zinc-plated and passivated. - [Plate spring for sliding hub FS 612050-612060 SKU: 61205600](https://maedler.in/product/plate-spring-for-sliding-hub-fs-612050-612060-sku-61205600/): Material: Special spring-steel. Delivery per piece. - [Bush 21,1 for sliding hub FS 612050-612060 SKU: 61205400](https://maedler.in/product/bush-211-for-sliding-hub-fs-612050-612060-sku-61205400/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 19,5 for sliding hub FS 612050-612060 SKU: 61205300](https://maedler.in/product/bush-195-for-sliding-hub-fs-612050-612060-sku-61205300/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 16mm for sliding hub FS 612050-612060 SKU: 61205200](https://maedler.in/product/bush-16mm-for-sliding-hub-fs-612050-612060-sku-61205200/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Adjusting nut for sliding hub FS 612030-612040 SKU: 61203700](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-612030-612040-sku-61203700/): Material: Steel, zinc-plated and passivated. - [Plate spring for sliding hub FS 612030-612040 SKU: 61203600](https://maedler.in/product/plate-spring-for-sliding-hub-fs-612030-612040-sku-61203600/): Material: Special spring-steel. Delivery per piece. - [Bush 21,1 for sliding hub FS 612030-612040 SKU: 61203400](https://maedler.in/product/bush-211-for-sliding-hub-fs-612030-612040-sku-61203400/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 13,7 for sliding hub FS 612030-61240 SKU: 61203300](https://maedler.in/product/bush-137-for-sliding-hub-fs-612030-61240-sku-61203300/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 10,3 for sliding hub FS 612030-612040 SKU: 61203200](https://maedler.in/product/bush-103-for-sliding-hub-fs-612030-612040-sku-61203200/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Adjusting nut for sliding hub FS 612010-612020 SKU: 61201700](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-612010-612020-sku-61201700/): Material: Steel, zinc-plated and passivated. - [Plate spring for sliding hub FS 612010-612020 SKU: 61201600](https://maedler.in/product/plate-spring-for-sliding-hub-fs-612010-612020-sku-61201600/): Material: Special spring-steel. Delivery per piece. - [Bush 13,7 for sliding hub FS 612010-612020 SKU: 61201400](https://maedler.in/product/bush-137-for-sliding-hub-fs-612010-612020-sku-61201400/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 12,2 for sliding hub FS 612010-612020 SKU: 61201300](https://maedler.in/product/bush-122-for-sliding-hub-fs-612010-612020-sku-61201300/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Bush 10,3 for sliding hub FS 612010-612020 SKU: 61201200](https://maedler.in/product/bush-103-for-sliding-hub-fs-612010-612020-sku-61201200/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Plate spring for sliding hub FS 61200500-61200600 SKU: 61200800](https://maedler.in/product/plate-spring-for-sliding-hub-fs-61200500-61200600-sku-61200800/): Material: Special spring-steel. Delivery per piece. - [Adjusting nut for sliding hub FS 61200500 and 61200600 SKU: 61200507](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-61200500-and-61200600-sku-61200507/): Material: Steel, zinc-plated and passivated. - [Bush 4,2 for sliding hub FS 61200500 and 61200600 SKU: 61200502](https://maedler.in/product/bush-42-for-sliding-hub-fs-61200500-and-61200600-sku-61200502/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Plate spring for sliding hub FS 61200000-61200100 SKU: 61200400](https://maedler.in/product/plate-spring-for-sliding-hub-fs-61200000-61200100-sku-61200400/): Material: Special spring-steel. Delivery per piece. - [Adjusting nut for sliding hub FS 61200000 and 61200100 SKU: 61200007](https://maedler.in/product/adjusting-nut-for-sliding-hub-fs-61200000-and-61200100-sku-61200007/): Material: Steel, zinc-plated and passivated. - [Bush 4,2 for sliding hub FS 61200000 and 61200100 SKU: 61200002](https://maedler.in/product/bush-42-for-sliding-hub-fs-61200000-and-61200100-sku-61200002/): Material: Bronze. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = C + 1.5 x G. Other bush lengths and customized bores or feather-key grooves against extra charge. - [Spider (coupling insert) backlash-free 98 Shore A red size 55 outside diameter 120mm SKU: 60519855](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-55-outside-diameter-120mm-sku-60519855/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 48 outside diameter 105mm SKU: 60519848](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-48-outside-diameter-105mm-sku-60519848/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 42 outside diameter 95mm SKU: 60519842](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-42-outside-diameter-95mm-sku-60519842/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 38 outside diameter 80mm SKU: 60519838](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-38-outside-diameter-80mm-sku-60519838/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 28 outside diameter 65mm SKU: 60519828](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-28-outside-diameter-65mm-sku-60519828/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 24 outside diameter 55mm SKU: 60519824](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-24-outside-diameter-55mm-sku-60519824/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Spider (coupling insert) backlash-free 98 Shore A red size 19 outside diameter 40mm SKU: 60519819](https://maedler.in/product/spider-coupling-insert-backlash-free-98-shore-a-red-size-19-outside-diameter-40mm-sku-60519819/): Material: Polyurethane, shore hardness 98° A (medium hard), red. Spiders (plastic inserts) for backlash-free elastic couplings (jaw couplings) like RNH, RNK, RNKC, connecting shafts RNW and foreign parts of the same kind from other suppliers. Medium hard type, for high torques. Temperature range -30°C to +100°C. - [Bush EP22 bore 15mm outer diameter 17mm length 15mm colour: white SKU: 62721515](https://maedler.in/product/bush-ep22-bore-15mm-outer-diameter-17mm-length-15mm-colour-white-sku-62721515/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 14mm outer diameter 16mm length 25mm colour: white SKU: 62721425](https://maedler.in/product/bush-ep22-bore-14mm-outer-diameter-16mm-length-25mm-colour-white-sku-62721425/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 14mm outer diameter 16mm length 20mm colour: white SKU: 62721420](https://maedler.in/product/bush-ep22-bore-14mm-outer-diameter-16mm-length-20mm-colour-white-sku-62721420/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 14mm outer diameter 16mm length 15mm colour: white SKU: 62721415](https://maedler.in/product/bush-ep22-bore-14mm-outer-diameter-16mm-length-15mm-colour-white-sku-62721415/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 14mm outer diameter 16mm length 12mm colour: white SKU: 62721412](https://maedler.in/product/bush-ep22-bore-14mm-outer-diameter-16mm-length-12mm-colour-white-sku-62721412/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 12mm outer diameter 14mm length 20mm colour: white SKU: 62721220](https://maedler.in/product/bush-ep22-bore-12mm-outer-diameter-14mm-length-20mm-colour-white-sku-62721220/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 12mm outer diameter 14mm length 15mm colour: white SKU: 62721215](https://maedler.in/product/bush-ep22-bore-12mm-outer-diameter-14mm-length-15mm-colour-white-sku-62721215/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 12mm outer diameter 14mm length 12mm colour: white SKU: 62721212](https://maedler.in/product/bush-ep22-bore-12mm-outer-diameter-14mm-length-12mm-colour-white-sku-62721212/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 12mm outer diameter 14mm length 10mm colour: white SKU: 62721210](https://maedler.in/product/bush-ep22-bore-12mm-outer-diameter-14mm-length-10mm-colour-white-sku-62721210/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 10mm outer diameter 12mm length 20mm colour: white SKU: 62721020](https://maedler.in/product/bush-ep22-bore-10mm-outer-diameter-12mm-length-20mm-colour-white-sku-62721020/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 10mm outer diameter 12mm length 15mm colour: white SKU: 62721015](https://maedler.in/product/bush-ep22-bore-10mm-outer-diameter-12mm-length-15mm-colour-white-sku-62721015/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 10mm outer diameter 12mm length 10mm colour: white SKU: 62721010](https://maedler.in/product/bush-ep22-bore-10mm-outer-diameter-12mm-length-10mm-colour-white-sku-62721010/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 10mm outer diameter 12mm length 8mm colour: white SKU: 62721008](https://maedler.in/product/bush-ep22-bore-10mm-outer-diameter-12mm-length-8mm-colour-white-sku-62721008/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 10mm outer diameter 12mm length 6mm colour: white SKU: 62721006](https://maedler.in/product/bush-ep22-bore-10mm-outer-diameter-12mm-length-6mm-colour-white-sku-62721006/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 10mm outer diameter 12mm length 4mm colour: white SKU: 62721004](https://maedler.in/product/bush-ep22-bore-10mm-outer-diameter-12mm-length-4mm-colour-white-sku-62721004/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 8mm outer diameter 10mm length 15mm colour: white SKU: 62720815](https://maedler.in/product/bush-ep22-bore-8mm-outer-diameter-10mm-length-15mm-colour-white-sku-62720815/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 8mm outer diameter 10mm length 12mm colour: white SKU: 62720812](https://maedler.in/product/bush-ep22-bore-8mm-outer-diameter-10mm-length-12mm-colour-white-sku-62720812/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 8mm outer diameter 10mm length 10mm colour: white SKU: 62720810](https://maedler.in/product/bush-ep22-bore-8mm-outer-diameter-10mm-length-10mm-colour-white-sku-62720810/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 8mm outer diameter 10mm length 8mm colour: white SKU: 62720808](https://maedler.in/product/bush-ep22-bore-8mm-outer-diameter-10mm-length-8mm-colour-white-sku-62720808/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 8mm outer diameter 10mm length 6mm colour: white SKU: 62720806](https://maedler.in/product/bush-ep22-bore-8mm-outer-diameter-10mm-length-6mm-colour-white-sku-62720806/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 22mm width 7mm shielded on both sides SKU: 627-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-sku-627-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 22mm width 7mm shielded on both sides clearance C3 SKU: 627-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-clearance-c3-sku-627-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 22mm width 7mm sealed on both sides SKU: 627-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-sku-627-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 22mm width 7mm sealed on both sides SKU: 627-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-sku-627-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 22mm width 7mm sealed on both sides clearance C3 SKU: 627-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-clearance-c3-sku-627-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Flange bush EP43 bore 25mm outer diameter 28mm flange diameter 35mm length 21,5mm colour: brown SKU: 62712521](https://maedler.in/product/flange-bush-ep43-bore-25mm-outer-diameter-28mm-flange-diameter-35mm-length-215mm-colour-brown-sku-62712521/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 25mm outer diameter 28mm flange diameter 35mm length 16,5mm colour: brown SKU: 62712516](https://maedler.in/product/flange-bush-ep43-bore-25mm-outer-diameter-28mm-flange-diameter-35mm-length-165mm-colour-brown-sku-62712516/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 25mm outer diameter 28mm flange diameter 35mm length 11,5mm colour: brown SKU: 62712511](https://maedler.in/product/flange-bush-ep43-bore-25mm-outer-diameter-28mm-flange-diameter-35mm-length-115mm-colour-brown-sku-62712511/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 20mm outer diameter 23mm flange diameter 30mm length 21,5mm colour: brown SKU: 62712021](https://maedler.in/product/flange-bush-ep43-bore-20mm-outer-diameter-23mm-flange-diameter-30mm-length-215mm-colour-brown-sku-62712021/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 20mm outer diameter 23mm flange diameter 30mm length 16,5mm colour: brown SKU: 62712016](https://maedler.in/product/flange-bush-ep43-bore-20mm-outer-diameter-23mm-flange-diameter-30mm-length-165mm-colour-brown-sku-62712016/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 20mm outer diameter 23mm flange diameter 30mm length 11,5mm colour: brown SKU: 62712011](https://maedler.in/product/flange-bush-ep43-bore-20mm-outer-diameter-23mm-flange-diameter-30mm-length-115mm-colour-brown-sku-62712011/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 16mm outer diameter 18mm flange diameter 24mm length 17mm colour: brown SKU: 62711617](https://maedler.in/product/flange-bush-ep43-bore-16mm-outer-diameter-18mm-flange-diameter-24mm-length-17mm-colour-brown-sku-62711617/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 15mm outer diameter 17mm flange diameter 23mm length 20mm colour: brown SKU: 62711520](https://maedler.in/product/flange-bush-ep43-bore-15mm-outer-diameter-17mm-flange-diameter-23mm-length-20mm-colour-brown-sku-62711520/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 15mm outer diameter 17mm flange diameter 23mm length 17mm colour: brown SKU: 62711517](https://maedler.in/product/flange-bush-ep43-bore-15mm-outer-diameter-17mm-flange-diameter-23mm-length-17mm-colour-brown-sku-62711517/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 15mm outer diameter 17mm flange diameter 23mm length 12mm colour: brown SKU: 62711512](https://maedler.in/product/flange-bush-ep43-bore-15mm-outer-diameter-17mm-flange-diameter-23mm-length-12mm-colour-brown-sku-62711512/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 15mm outer diameter 17mm flange diameter 23mm length 9mm colour: brown SKU: 62711509](https://maedler.in/product/flange-bush-ep43-bore-15mm-outer-diameter-17mm-flange-diameter-23mm-length-9mm-colour-brown-sku-62711509/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 14mm outer diameter 16mm flange diameter 22mm length 17mm colour: brown SKU: 62711417](https://maedler.in/product/flange-bush-ep43-bore-14mm-outer-diameter-16mm-flange-diameter-22mm-length-17mm-colour-brown-sku-62711417/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 14mm outer diameter 16mm flange diameter 22mm length 12mm colour: brown SKU: 62711412](https://maedler.in/product/flange-bush-ep43-bore-14mm-outer-diameter-16mm-flange-diameter-22mm-length-12mm-colour-brown-sku-62711412/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 12mm outer diameter 14mm flange diameter 20mm length 20mm colour: brown SKU: 62711220](https://maedler.in/product/flange-bush-ep43-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-20mm-colour-brown-sku-62711220/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 12mm outer diameter 14mm flange diameter 20mm length 17mm colour: brown SKU: 62711217](https://maedler.in/product/flange-bush-ep43-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-17mm-colour-brown-sku-62711217/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 12mm outer diameter 14mm flange diameter 20mm length 15mm colour: brown SKU: 62711215](https://maedler.in/product/flange-bush-ep43-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-15mm-colour-brown-sku-62711215/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 12mm outer diameter 14mm flange diameter 20mm length 12mm colour: brown SKU: 62711212](https://maedler.in/product/flange-bush-ep43-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-12mm-colour-brown-sku-62711212/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 12mm outer diameter 14mm flange diameter 20mm length 9mm colour: brown SKU: 62711209](https://maedler.in/product/flange-bush-ep43-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-9mm-colour-brown-sku-62711209/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 12mm outer diameter 14mm flange diameter 20mm length 7mm colour: brown SKU: 62711207](https://maedler.in/product/flange-bush-ep43-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-7mm-colour-brown-sku-62711207/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 10mm outer diameter 12mm flange diameter 18mm length 17mm colour: brown SKU: 62711017](https://maedler.in/product/flange-bush-ep43-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-17mm-colour-brown-sku-62711017/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 10mm outer diameter 12mm flange diameter 18mm length 15mm colour: brown SKU: 62711015](https://maedler.in/product/flange-bush-ep43-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-15mm-colour-brown-sku-62711015/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 10mm outer diameter 12mm flange diameter 18mm length 12mm colour: brown SKU: 62711012](https://maedler.in/product/flange-bush-ep43-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-12mm-colour-brown-sku-62711012/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 10mm outer diameter 12mm flange diameter 18mm length 9mm colour: brown SKU: 62711009](https://maedler.in/product/flange-bush-ep43-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-9mm-colour-brown-sku-62711009/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 10mm outer diameter 12mm flange diameter 18mm length 7mm colour: brown SKU: 62711007](https://maedler.in/product/flange-bush-ep43-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-7mm-colour-brown-sku-62711007/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 8mm outer diameter 10mm flange diameter 15mm length 10mm colour: brown SKU: 62710810](https://maedler.in/product/flange-bush-ep43-bore-8mm-outer-diameter-10mm-flange-diameter-15mm-length-10mm-colour-brown-sku-62710810/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 8mm outer diameter 10mm flange diameter 15mm length 7,5mm colour: brown SKU: 62710807](https://maedler.in/product/flange-bush-ep43-bore-8mm-outer-diameter-10mm-flange-diameter-15mm-length-75mm-colour-brown-sku-62710807/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Flange bush EP43 bore 8mm outer diameter 10mm flange diameter 15mm length 5.5mm colour: brown SKU: 62710805](https://maedler.in/product/flange-bush-ep43-bore-8mm-outer-diameter-10mm-flange-diameter-15mm-length-5-5mm-colour-brown-sku-62710805/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing flange bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 25mm outer diameter 28mm length 20mm colour: brown SKU: 62702520](https://maedler.in/product/bush-ep43-bore-25mm-outer-diameter-28mm-length-20mm-colour-brown-sku-62702520/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 25mm outer diameter 28mm length 15mm colour: brown SKU: 62702515](https://maedler.in/product/bush-ep43-bore-25mm-outer-diameter-28mm-length-15mm-colour-brown-sku-62702515/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 20mm outer diameter 23mm length 30mm colour: brown SKU: 62702030](https://maedler.in/product/bush-ep43-bore-20mm-outer-diameter-23mm-length-30mm-colour-brown-sku-62702030/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 20mm outer diameter 23mm length 20mm colour: brown SKU: 62702020](https://maedler.in/product/bush-ep43-bore-20mm-outer-diameter-23mm-length-20mm-colour-brown-sku-62702020/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 20mm outer diameter 23mm length 15mm colour: brown SKU: 62702015](https://maedler.in/product/bush-ep43-bore-20mm-outer-diameter-23mm-length-15mm-colour-brown-sku-62702015/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 15mm outer diameter 17mm length 25mm colour: brown SKU: 62701525](https://maedler.in/product/bush-ep43-bore-15mm-outer-diameter-17mm-length-25mm-colour-brown-sku-62701525/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 15mm outer diameter 17mm length 20mm colour: brown SKU: 62701520](https://maedler.in/product/bush-ep43-bore-15mm-outer-diameter-17mm-length-20mm-colour-brown-sku-62701520/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 15mm outer diameter 17mm length 15mm colour: brown SKU: 62701515](https://maedler.in/product/bush-ep43-bore-15mm-outer-diameter-17mm-length-15mm-colour-brown-sku-62701515/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 14mm outer diameter 16mm length 25mm colour: brown SKU: 62701425](https://maedler.in/product/bush-ep43-bore-14mm-outer-diameter-16mm-length-25mm-colour-brown-sku-62701425/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 14mm outer diameter 16mm length 20mm colour: brown SKU: 62701420](https://maedler.in/product/bush-ep43-bore-14mm-outer-diameter-16mm-length-20mm-colour-brown-sku-62701420/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 14mm outer diameter 16mm length 15mm colour: brown SKU: 62701415](https://maedler.in/product/bush-ep43-bore-14mm-outer-diameter-16mm-length-15mm-colour-brown-sku-62701415/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 12mm outer diameter 14mm length 20mm colour: brown SKU: 62701220](https://maedler.in/product/bush-ep43-bore-12mm-outer-diameter-14mm-length-20mm-colour-brown-sku-62701220/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 12mm outer diameter 14mm length 15mm colour: brown SKU: 62701215](https://maedler.in/product/bush-ep43-bore-12mm-outer-diameter-14mm-length-15mm-colour-brown-sku-62701215/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 12mm outer diameter 14mm length 12mm colour: brown SKU: 62701212](https://maedler.in/product/bush-ep43-bore-12mm-outer-diameter-14mm-length-12mm-colour-brown-sku-62701212/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 12mm outer diameter 14mm length 10mm colour: brown SKU: 62701210](https://maedler.in/product/bush-ep43-bore-12mm-outer-diameter-14mm-length-10mm-colour-brown-sku-62701210/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 10mm outer diameter 12mm length 20mm colour: brown SKU: 62701020](https://maedler.in/product/bush-ep43-bore-10mm-outer-diameter-12mm-length-20mm-colour-brown-sku-62701020/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 10mm outer diameter 12mm length 15mm colour: brown SKU: 62701015](https://maedler.in/product/bush-ep43-bore-10mm-outer-diameter-12mm-length-15mm-colour-brown-sku-62701015/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 10mm outer diameter 12mm length 10mm colour: brown SKU: 62701010](https://maedler.in/product/bush-ep43-bore-10mm-outer-diameter-12mm-length-10mm-colour-brown-sku-62701010/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 10mm outer diameter 12mm length 8mm colour: brown SKU: 62701008](https://maedler.in/product/bush-ep43-bore-10mm-outer-diameter-12mm-length-8mm-colour-brown-sku-62701008/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 10mm outer diameter 12mm length 6mm colour: brown SKU: 62701006](https://maedler.in/product/bush-ep43-bore-10mm-outer-diameter-12mm-length-6mm-colour-brown-sku-62701006/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 10mm outer diameter 12mm length 4mm colour: brown SKU: 62701004](https://maedler.in/product/bush-ep43-bore-10mm-outer-diameter-12mm-length-4mm-colour-brown-sku-62701004/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 8mm outer diameter 10mm length 15mm colour: brown SKU: 62700815](https://maedler.in/product/bush-ep43-bore-8mm-outer-diameter-10mm-length-15mm-colour-brown-sku-62700815/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 8mm outer diameter 10mm length 12mm colour: brown SKU: 62700812](https://maedler.in/product/bush-ep43-bore-8mm-outer-diameter-10mm-length-12mm-colour-brown-sku-62700812/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 8mm outer diameter 10mm length 10mm colour: brown SKU: 62700810](https://maedler.in/product/bush-ep43-bore-8mm-outer-diameter-10mm-length-10mm-colour-brown-sku-62700810/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 8mm outer diameter 10mm length 8mm colour: brown SKU: 62700808](https://maedler.in/product/bush-ep43-bore-8mm-outer-diameter-10mm-length-8mm-colour-brown-sku-62700808/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [Bush EP43 bore 8mm outer diameter 10mm length 6mm colour: brown SKU: 62700806](https://maedler.in/product/bush-ep43-bore-8mm-outer-diameter-10mm-length-6mm-colour-brown-sku-62700806/): Material: Thermoplast polyphenylensulfid, reinforced, modified (PPS + PTFE + aramid), brown. Plain bearing bush made from high sophisticated thermoplastic. Very low friction. Specially suited for dry-running and for use under water and at high temperatures. Colour: brown.Good chemical and hydrolysis resistance. Low friction, optimised for dry running conditions. High dimensional stability. Temperature range -40ºC bis + 240ºC. Operating Conditions : dry : very good. oiled: good. water: very good. field of aplication: Domestic appliances, convoyers, machinery, cash slot machines and many more. - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 22mm width 7mm shielded on both sides SKU: 627-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-sku-627-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Ball flange bearing SSUFL 005 bore 25mm with eccentric ring housing and bearing stainless steel SKU: 62699725](https://maedler.in/product/ball-flange-bearing-ssufl-005-bore-25mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62699725/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSUFL 004 bore 20mm with eccentric ring housing and bearing stainless steel SKU: 62699720](https://maedler.in/product/ball-flange-bearing-ssufl-004-bore-20mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62699720/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSUFL 003 bore 17mm with eccentric ring housing and bearing stainless steel SKU: 62699717](https://maedler.in/product/ball-flange-bearing-ssufl-003-bore-17mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62699717/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSUFL 002 bore 15mm with eccentric ring housing and bearing stainless steel SKU: 62699715](https://maedler.in/product/ball-flange-bearing-ssufl-002-bore-15mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62699715/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSUFL 001 bore 12mm with eccentric ring housing and bearing stainless steel SKU: 62699712](https://maedler.in/product/ball-flange-bearing-ssufl-001-bore-12mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62699712/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSUFL 000 bore 10mm with eccentric ring housing and bearing stainless steel SKU: 62699710](https://maedler.in/product/ball-flange-bearing-ssufl-000-bore-10mm-with-eccentric-ring-housing-and-bearing-stainless-steel-sku-62699710/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. During assembly, the eccentric ring and the inner bearing ring are turned against each other to clamp the shaft. The eccentric ring is additionally secured on the shaft with 1 set screw. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSKFL 005 bore 25mm housing and bearing stainless steel SKU: 62699625](https://maedler.in/product/ball-flange-bearing-sskfl-005-bore-25mm-housing-and-bearing-stainless-steel-sku-62699625/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSKFL 004 bore 20mm housing and bearing stainless steel SKU: 62699620](https://maedler.in/product/ball-flange-bearing-sskfl-004-bore-20mm-housing-and-bearing-stainless-steel-sku-62699620/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSKFL 003 bore 17mm housing and bearing stainless steel SKU: 62699617](https://maedler.in/product/ball-flange-bearing-sskfl-003-bore-17mm-housing-and-bearing-stainless-steel-sku-62699617/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSKFL 002 bore 15mm housing and bearing stainless steel SKU: 62699615](https://maedler.in/product/ball-flange-bearing-sskfl-002-bore-15mm-housing-and-bearing-stainless-steel-sku-62699615/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSKFL 001 bore 12mm housing and bearing stainless steel SKU: 62699612](https://maedler.in/product/ball-flange-bearing-sskfl-001-bore-12mm-housing-and-bearing-stainless-steel-sku-62699612/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSKFL 000 bore 10mm housing and bearing stainless steel SKU: 62699610](https://maedler.in/product/ball-flange-bearing-sskfl-000-bore-10mm-housing-and-bearing-stainless-steel-sku-62699610/): Material: Housing: Stainless steel 1.4301 (AISI 304). Rolling bearing: Stainless steel 1.4125 (AISI 440C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 set screws. Lubricated for life at normal operating conditions.1) Maximum radial load if axial force = 0. The axial load rating is approx. 20% of the radial load rating. - [Ball flange bearing SSBPFL 207 bore 35mm bearing and two-part housing from stainless steel SKU: 62699535](https://maedler.in/product/ball-flange-bearing-ssbpfl-207-bore-35mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699535/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPFL 206 bore 30mm bearing and two-part housing from stainless steel SKU: 62699530](https://maedler.in/product/ball-flange-bearing-ssbpfl-206-bore-30mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699530/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPFL 205 bore 25mm bearing and two-part housing from stainless steel SKU: 62699525](https://maedler.in/product/ball-flange-bearing-ssbpfl-205-bore-25mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699525/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPFL 204 bore 20mm bearing and two-part housing from stainless steel SKU: 62699520](https://maedler.in/product/ball-flange-bearing-ssbpfl-204-bore-20mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699520/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPFL 203 bore 17mm bearing and two-part housing from stainless steel SKU: 62699517](https://maedler.in/product/ball-flange-bearing-ssbpfl-203-bore-17mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699517/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPFL 202 bore 15mm bearing and two-part housing from stainless steel SKU: 62699515](https://maedler.in/product/ball-flange-bearing-ssbpfl-202-bore-15mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699515/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPFL 201 bore 12mm bearing and two-part housing from stainless steel SKU: 62699512](https://maedler.in/product/ball-flange-bearing-ssbpfl-201-bore-12mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699512/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 2 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPF 207 bore 35mm bearing and two-part housing from stainless steel SKU: 62699435](https://maedler.in/product/ball-flange-bearing-ssbpf-207-bore-35mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699435/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Ball flange bearing SSBPF 206 bore 30mm bearing and two-part housing from stainless steel SKU: 62699430](https://maedler.in/product/ball-flange-bearing-ssbpf-206-bore-30mm-bearing-and-two-part-housing-from-stainless-steel-sku-62699430/): Material: Housing from two-part sheets: Stainless steel 1.4305 (X5CrNi18-10, AISI 304). Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. Temperature range: -20°C to +90°C (for short time up to +120°C).With 3 mounting holes. The rolling bearing can be swiveled when mounting to compensate shaft misalignement. The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is not possible. - [Roller chain with straight attachments 12 B-1-M2 2xp attachments wide version on one side SKU: 10700051](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10700051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 6xp attachments slim version on both sides SKU: 10700036](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10700036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 6xp attachments slim version on one side SKU: 10700035](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10700035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 4xp attachments slim version on both sides SKU: 10700034](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10700034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 4xp attachments slim version on one side SKU: 10700033](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10700033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 2xp attachments slim version on both sides SKU: 10700032](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10700032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M1 2xp attachments slim version on one side SKU: 10700031](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10700031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 6xp attachments wide version on both sides SKU: 10700026](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10700026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 6xp attachments wide version on one side SKU: 10700025](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10700025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 4xp attachments wide version on both sides SKU: 10700024](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10700024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 4xp attachments wide version on one side SKU: 10700023](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10700023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 2xp attachments wide version on both sides SKU: 10700022](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10700022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K2 2xp attachments wide version on one side SKU: 10700021](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10700021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 6xp attachments slim version on both sides SKU: 10700006](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10700006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 6xp attachments slim version on one side SKU: 10700005](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10700005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 4xp attachments slim version on both sides SKU: 10700004](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10700004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 4xp attachments slim version on one side SKU: 10700003](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10700003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 2xp attachments slim version on both sides SKU: 10700002](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10700002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 12 B-1-K1 2xp attachments slim version on one side SKU: 10700001](https://maedler.in/product/roller-chain-with-bent-attachments-12-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10700001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain connecting link type 11 / E with straight attachments 10 B-1-M2 attachments wide version on both sides stainless steel 1.4301 SKU: 10699352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10699352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M2 attachments wide version on one side stainless steel 1.4301 SKU: 10699351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10699351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10699332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10699332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10699331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10699331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K2 attachments wide version on both sides stainless steel 1.4301 SKU: 10699322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10699322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10699321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10699321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K1 attachments slim version on both sides stainless steel 1.4301 SKU: 10699302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10699302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10699301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10699301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 10 B-1-M2 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10699052](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10699052/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with straight attachments 10 B-1-M2 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10699051](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10699051/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with bent attachments 10 B-1-K2 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10699022](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10699022/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Roller chain with bent attachments 10 B-1-K2 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10699021](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10699021/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Chain connecting link type 11 / E with straight attachments 10 B-1-M2 attachments wide version on both sides SKU: 10600352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m2-attachments-wide-version-on-both-sides-sku-10600352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M2 attachments wide version on one side SKU: 10600351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m2-attachments-wide-version-on-one-side-sku-10600351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M1 attachments slim version on both sides SKU: 10600332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m1-attachments-slim-version-on-both-sides-sku-10600332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 10 B-1-M1 attachments slim version on one side SKU: 10600331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-10-b-1-m1-attachments-slim-version-on-one-side-sku-10600331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 10 B-1-K2 attachments wide version on both sides SKU: 10600322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k2-attachments-wide-version-on-both-sides-sku-10600322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K2 attachments wide version on one side SKU: 10600321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k2-attachments-wide-version-on-one-side-sku-10600321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K1 attachments slim version on both sides SKU: 10600302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k1-attachments-slim-version-on-both-sides-sku-10600302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 10 B-1-K1 attachments slim version on one side SKU: 10600301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-10-b-1-k1-attachments-slim-version-on-one-side-sku-10600301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 10 B-1-M2 6xp attachments wide version on both sides SKU: 10600056](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10600056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 6xp attachments wide version on one side SKU: 10600055](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10600055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 4xp attachments wide version on both sides SKU: 10600054](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10600054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 4xp attachments wide version on one side SKU: 10600053](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10600053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 2xp attachments wide version on both sides SKU: 10600052](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10600052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M2 2xp attachments wide version on one side SKU: 10600051](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10600051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 6xp attachments slim version on both sides SKU: 10600036](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10600036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 6xp attachments slim version on one side SKU: 10600035](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10600035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 4xp attachments slim version on both sides SKU: 10600034](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10600034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 4xp attachments slim version on one side SKU: 10600033](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10600033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 2xp attachments slim version on both sides SKU: 10600032](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10600032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 10 B-1-M1 2xp attachments slim version on one side SKU: 10600031](https://maedler.in/product/roller-chain-with-straight-attachments-10-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10600031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 6xp attachments wide version on both sides SKU: 10600026](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10600026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 6xp attachments wide version on one side SKU: 10600025](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10600025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 4xp attachments wide version on both sides SKU: 10600024](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10600024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 4xp attachments wide version on one side SKU: 10600023](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10600023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 2xp attachments wide version on both sides SKU: 10600022](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10600022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K2 2xp attachments wide version on one side SKU: 10600021](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10600021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 6xp attachments slim version on both sides SKU: 10600006](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10600006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 6xp attachments slim version on one side SKU: 10600005](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10600005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 4xp attachments slim version on both sides SKU: 10600004](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10600004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 4xp attachments slim version on one side SKU: 10600003](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10600003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 2xp attachments slim version on both sides SKU: 10600002](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10600002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 10 B-1-K1 2xp attachments slim version on one side SKU: 10600001](https://maedler.in/product/roller-chain-with-bent-attachments-10-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10600001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain connecting link type 11 / E with straight attachments 08 B-1-M2 attachments wide version on both sides stainless steel 1.4301 SKU: 10599352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10599352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M2 attachments wide version on one side stainless steel 1.4301 SKU: 10599351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10599351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10599332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10599332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10599331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10599331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K2 attachments wide version on both sides stainless steel 1.4301 SKU: 10599322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10599322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10599321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10599321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K1 attachments slim version on both sides stainless steel 1.4301 SKU: 10599302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10599302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10599301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10599301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 08 B-1-M2 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10599052](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10599052/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with straight attachments 08 B-1-M2 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10599051](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10599051/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. - [Roller chain with bent attachments 08 B-1-K2 2xp attachments wide version on both sides stainless steel 1.4301 SKU: 10599022](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-2xp-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10599022/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), two-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Roller chain with bent attachments 08 B-1-K2 2xp attachments wide version on one side stainless steel 1.4301 SKU: 10599021](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-2xp-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10599021/): Material: Stainless steel 1.4301 (AISI 304). Simplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link), one-sided. Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. - [Chain connecting link type 11 / E with straight attachments 08 B-1-M2 attachments wide version on both sides SKU: 10500352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m2-attachments-wide-version-on-both-sides-sku-10500352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M2 attachments wide version on one side SKU: 10500351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m2-attachments-wide-version-on-one-side-sku-10500351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M1 attachments slim version on both sides SKU: 10500332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m1-attachments-slim-version-on-both-sides-sku-10500332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 08 B-1-M1 attachments slim version on one side SKU: 10500331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-08-b-1-m1-attachments-slim-version-on-one-side-sku-10500331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 08 B-1-K2 attachments wide version on both sides SKU: 10500322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k2-attachments-wide-version-on-both-sides-sku-10500322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K2 attachments wide version on one side SKU: 10500321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k2-attachments-wide-version-on-one-side-sku-10500321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K1 attachments slim version on both sides SKU: 10500302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k1-attachments-slim-version-on-both-sides-sku-10500302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 08 B-1-K1 attachments slim version on one side SKU: 10500301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-08-b-1-k1-attachments-slim-version-on-one-side-sku-10500301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 08 B-1-M2 6xp attachments wide version on both sides SKU: 10500056](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10500056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 6xp attachments wide version on one side SKU: 10500055](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10500055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 4xp attachments wide version on both sides SKU: 10500054](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10500054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 4xp attachments wide version on one side SKU: 10500053](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10500053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 2xp attachments wide version on both sides SKU: 10500052](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10500052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M2 2xp attachments wide version on one side SKU: 10500051](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10500051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 6xp attachments slim version on both sides SKU: 10500036](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10500036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 6xp attachments slim version on one side SKU: 10500035](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10500035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 4xp attachments slim version on both sides SKU: 10500034](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10500034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 4xp attachments slim version on one side SKU: 10500033](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10500033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 2xp attachments slim version on both sides SKU: 10500032](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10500032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 08 B-1-M1 2xp attachments slim version on one side SKU: 10500031](https://maedler.in/product/roller-chain-with-straight-attachments-08-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10500031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 6xp attachments wide version on both sides SKU: 10500026](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10500026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 6xp attachments wide version on one side SKU: 10500025](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10500025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 4xp attachments wide version on both sides SKU: 10500024](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10500024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 4xp attachments wide version on one side SKU: 10500023](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10500023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 08 B-1-K2 2xp attachments wide version on both sides SKU: 10500022](https://maedler.in/product/roller-chain-with-bent-attachments-08-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10500022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Cardan joint KE outer diameter 63mm both sides bore 40H7 material steel total length 166mm SKU: 63016300](https://maedler.in/product/cardan-joint-ke-outer-diameter-63mm-both-sides-bore-40h7-material-steel-total-length-166mm-sku-63016300/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 50mm bore 32H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63015000N](https://maedler.in/product/cardan-joint-ke-outer-diameter-50mm-bore-32h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63015000n/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 50mm both sides bore 32H7 material steel total length 132mm SKU: 63015000](https://maedler.in/product/cardan-joint-ke-outer-diameter-50mm-both-sides-bore-32h7-material-steel-total-length-132mm-sku-63015000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 40mm both sides bore 25H7 material steel total length 108mm SKU: 63014000](https://maedler.in/product/cardan-joint-ke-outer-diameter-40mm-both-sides-bore-25h7-material-steel-total-length-108mm-sku-63014000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 32mm both sides bore 20H7 material steel total length 86mm SKU: 63013200](https://maedler.in/product/cardan-joint-ke-outer-diameter-32mm-both-sides-bore-20h7-material-steel-total-length-86mm-sku-63013200/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 25mm both sides bore 16H7 material steel total length 74mm SKU: 63012500](https://maedler.in/product/cardan-joint-ke-outer-diameter-25mm-both-sides-bore-16h7-material-steel-total-length-74mm-sku-63012500/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 20mm bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63012000N](https://maedler.in/product/cardan-joint-ke-outer-diameter-20mm-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63012000n/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 20mm both sides bore 12H7 material steel total length 62mm SKU: 63012000](https://maedler.in/product/cardan-joint-ke-outer-diameter-20mm-both-sides-bore-12h7-material-steel-total-length-62mm-sku-63012000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 37mm width 12mm shielded on both sides SKU: 6301-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-37mm-width-12mm-shielded-on-both-sides-sku-6301-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 37mm width 12mm shielded on both sides clearance C3 SKU: 6301-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-37mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6301-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 37mm width 12mm sealed on both sides SKU: 6301-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-37mm-width-12mm-sealed-on-both-sides-sku-6301-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 37mm width 12mm sealed on both sides SKU: 6301-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-37mm-width-12mm-sealed-on-both-sides-sku-6301-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 37mm width 12mm sealed on both sides SKU: 6301-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-37mm-width-12mm-sealed-on-both-sides-sku-6301-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Cardan joint KE outer diameter 16mm both sides bore 10H7 material steel total length 52mm SKU: 63011600](https://maedler.in/product/cardan-joint-ke-outer-diameter-16mm-both-sides-bore-10h7-material-steel-total-length-52mm-sku-63011600/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 13mm both sides bore 8H7 material steel total length 42mm SKU: 63011300](https://maedler.in/product/cardan-joint-ke-outer-diameter-13mm-both-sides-bore-8h7-material-steel-total-length-42mm-sku-63011300/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 10mm both sides bore 6H7 material steel total length 40mm SKU: 63011000](https://maedler.in/product/cardan-joint-ke-outer-diameter-10mm-both-sides-bore-6h7-material-steel-total-length-40mm-sku-63011000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 37mm width 12mm shielded on both sides SKU: 6301-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-37mm-width-12mm-shielded-on-both-sides-sku-6301-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Cardan joint KE outer diameter 63mm no bore material steel total length 166mm SKU: 63006300](https://maedler.in/product/cardan-joint-ke-outer-diameter-63mm-no-bore-material-steel-total-length-166mm-sku-63006300/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 50mm no bore material steel total length 132mm SKU: 63005000](https://maedler.in/product/cardan-joint-ke-outer-diameter-50mm-no-bore-material-steel-total-length-132mm-sku-63005000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 40mm no bore material steel total length 108mm SKU: 63004000](https://maedler.in/product/cardan-joint-ke-outer-diameter-40mm-no-bore-material-steel-total-length-108mm-sku-63004000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 32mm no bore material steel total length 86mm SKU: 63003200](https://maedler.in/product/cardan-joint-ke-outer-diameter-32mm-no-bore-material-steel-total-length-86mm-sku-63003200/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 25mm no bore material steel total length 74mm SKU: 63002500](https://maedler.in/product/cardan-joint-ke-outer-diameter-25mm-no-bore-material-steel-total-length-74mm-sku-63002500/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 20mm no bore material steel total length 62mm SKU: 63002000](https://maedler.in/product/cardan-joint-ke-outer-diameter-20mm-no-bore-material-steel-total-length-62mm-sku-63002000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 35mm width 11mm shielded on both sides SKU: 6300-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-sku-6300-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 35mm width 11mm shielded on both sides clearance C3 SKU: 6300-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-clearance-c3-sku-6300-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 35mm width 11mm sealed on both sides SKU: 6300-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-sku-6300-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 35mm width 11mm sealed on both sides SKU: 6300-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-sku-6300-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 35mm width 11mm sealed on both sides clearance C3 SKU: 6300-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-clearance-c3-sku-6300-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Cardan joint KE outer diameter 16mm no bore material steel total length 52mm SKU: 63001600](https://maedler.in/product/cardan-joint-ke-outer-diameter-16mm-no-bore-material-steel-total-length-52mm-sku-63001600/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 13mm no bore material steel total length 42mm SKU: 63001300](https://maedler.in/product/cardan-joint-ke-outer-diameter-13mm-no-bore-material-steel-total-length-42mm-sku-63001300/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 10mm no bore material steel total length 40mm SKU: 63001000](https://maedler.in/product/cardan-joint-ke-outer-diameter-10mm-no-bore-material-steel-total-length-40mm-sku-63001000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 35mm width 11mm shielded on both sides SKU: 6300-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-sku-6300-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 26mm width 8mm shielded on both sides SKU: 629-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-sku-629-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 26mm width 8mm shielded on both sides clearance C3 SKU: 629-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-clearance-c3-sku-629-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 9mm outer diameter 26mm width 8mm sealed on both sides SKU: 629-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-sku-629-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 26mm width 8mm sealed on both sides SKU: 629-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-sku-629-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 26mm width 8mm sealed on both sides clearance C3 SKU: 629-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-clearance-c3-sku-629-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 9mm outer diameter 26mm width 8mm shielded on both sides SKU: 629-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-sku-629-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Flange bush EP22 bore 60mm outer diameter 65mm flange diameter 73mm length 70mm colour: white SKU: 62736070](https://maedler.in/product/flange-bush-ep22-bore-60mm-outer-diameter-65mm-flange-diameter-73mm-length-70mm-colour-white-sku-62736070/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 60mm outer diameter 65mm flange diameter 73mm length 50mm colour: white SKU: 62736050](https://maedler.in/product/flange-bush-ep22-bore-60mm-outer-diameter-65mm-flange-diameter-73mm-length-50mm-colour-white-sku-62736050/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 50mm outer diameter 55mm flange diameter 63mm length 60mm colour: white SKU: 62735060](https://maedler.in/product/flange-bush-ep22-bore-50mm-outer-diameter-55mm-flange-diameter-63mm-length-60mm-colour-white-sku-62735060/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 50mm outer diameter 55mm flange diameter 63mm length 26mm colour: white SKU: 62735026](https://maedler.in/product/flange-bush-ep22-bore-50mm-outer-diameter-55mm-flange-diameter-63mm-length-26mm-colour-white-sku-62735026/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 40mm outer diameter 44mm flange diameter 52mm length 50mm colour: white SKU: 62734050](https://maedler.in/product/flange-bush-ep22-bore-40mm-outer-diameter-44mm-flange-diameter-52mm-length-50mm-colour-white-sku-62734050/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 40mm outer diameter 44mm flange diameter 52mm length 26mm colour: white SKU: 62734026](https://maedler.in/product/flange-bush-ep22-bore-40mm-outer-diameter-44mm-flange-diameter-52mm-length-26mm-colour-white-sku-62734026/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 40mm outer diameter 44mm flange diameter 52mm length 16mm colour: white SKU: 62734016](https://maedler.in/product/flange-bush-ep22-bore-40mm-outer-diameter-44mm-flange-diameter-52mm-length-16mm-colour-white-sku-62734016/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 30mm outer diameter 34mm flange diameter 42mm length 40mm colour: white SKU: 62733040](https://maedler.in/product/flange-bush-ep22-bore-30mm-outer-diameter-34mm-flange-diameter-42mm-length-40mm-colour-white-sku-62733040/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 30mm outer diameter 34mm flange diameter 42mm length 26mm colour: white SKU: 62733026](https://maedler.in/product/flange-bush-ep22-bore-30mm-outer-diameter-34mm-flange-diameter-42mm-length-26mm-colour-white-sku-62733026/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 30mm outer diameter 34mm flange diameter 42mm length 16mm colour: white SKU: 62733016](https://maedler.in/product/flange-bush-ep22-bore-30mm-outer-diameter-34mm-flange-diameter-42mm-length-16mm-colour-white-sku-62733016/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 25mm outer diameter 28mm flange diameter 35mm length 21,5mm colour: white SKU: 62732521](https://maedler.in/product/flange-bush-ep22-bore-25mm-outer-diameter-28mm-flange-diameter-35mm-length-215mm-colour-white-sku-62732521/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 25mm outer diameter 28mm flange diameter 35mm length 16,5mm colour: white SKU: 62732516](https://maedler.in/product/flange-bush-ep22-bore-25mm-outer-diameter-28mm-flange-diameter-35mm-length-165mm-colour-white-sku-62732516/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 25mm outer diameter 28mm flange diameter 35mm length 11,5mm colour: white SKU: 62732511](https://maedler.in/product/flange-bush-ep22-bore-25mm-outer-diameter-28mm-flange-diameter-35mm-length-115mm-colour-white-sku-62732511/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 20mm outer diameter 23mm flange diameter 30mm length 21,5mm colour: white SKU: 62732021](https://maedler.in/product/flange-bush-ep22-bore-20mm-outer-diameter-23mm-flange-diameter-30mm-length-215mm-colour-white-sku-62732021/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 20mm outer diameter 23mm flange diameter 30mm length 16,5mm colour: white SKU: 62732016](https://maedler.in/product/flange-bush-ep22-bore-20mm-outer-diameter-23mm-flange-diameter-30mm-length-165mm-colour-white-sku-62732016/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 20mm outer diameter 23mm flange diameter 30mm length 11,5mm colour: white SKU: 62732011](https://maedler.in/product/flange-bush-ep22-bore-20mm-outer-diameter-23mm-flange-diameter-30mm-length-115mm-colour-white-sku-62732011/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 18mm outer diameter 20mm flange diameter 26mm length 17mm colour: white SKU: 62731817](https://maedler.in/product/flange-bush-ep22-bore-18mm-outer-diameter-20mm-flange-diameter-26mm-length-17mm-colour-white-sku-62731817/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 18mm outer diameter 20mm flange diameter 26mm length 12mm colour: white SKU: 62731812](https://maedler.in/product/flange-bush-ep22-bore-18mm-outer-diameter-20mm-flange-diameter-26mm-length-12mm-colour-white-sku-62731812/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 16mm outer diameter 18mm flange diameter 24mm length 17mm colour: white SKU: 62731617](https://maedler.in/product/flange-bush-ep22-bore-16mm-outer-diameter-18mm-flange-diameter-24mm-length-17mm-colour-white-sku-62731617/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 16mm outer diameter 18mm flange diameter 24mm length 12mm colour: white SKU: 62731612](https://maedler.in/product/flange-bush-ep22-bore-16mm-outer-diameter-18mm-flange-diameter-24mm-length-12mm-colour-white-sku-62731612/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 15mm outer diameter 17mm flange diameter 23mm length 20mm colour: white SKU: 62731520](https://maedler.in/product/flange-bush-ep22-bore-15mm-outer-diameter-17mm-flange-diameter-23mm-length-20mm-colour-white-sku-62731520/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 15mm outer diameter 17mm flange diameter 23mm length 17mm colour: white SKU: 62731517](https://maedler.in/product/flange-bush-ep22-bore-15mm-outer-diameter-17mm-flange-diameter-23mm-length-17mm-colour-white-sku-62731517/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 15mm outer diameter 17mm flange diameter 23mm length 12mm colour: white SKU: 62731512](https://maedler.in/product/flange-bush-ep22-bore-15mm-outer-diameter-17mm-flange-diameter-23mm-length-12mm-colour-white-sku-62731512/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 15mm outer diameter 17mm flange diameter 23mm length 9mm colour: white SKU: 62731509](https://maedler.in/product/flange-bush-ep22-bore-15mm-outer-diameter-17mm-flange-diameter-23mm-length-9mm-colour-white-sku-62731509/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 14mm outer diameter 16mm flange diameter 22mm length 17mm colour: white SKU: 62731417](https://maedler.in/product/flange-bush-ep22-bore-14mm-outer-diameter-16mm-flange-diameter-22mm-length-17mm-colour-white-sku-62731417/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 14mm outer diameter 16mm flange diameter 22mm length 12mm colour: white SKU: 62731412](https://maedler.in/product/flange-bush-ep22-bore-14mm-outer-diameter-16mm-flange-diameter-22mm-length-12mm-colour-white-sku-62731412/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 12mm outer diameter 14mm flange diameter 20mm length 20mm colour: white SKU: 62731220](https://maedler.in/product/flange-bush-ep22-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-20mm-colour-white-sku-62731220/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 12mm outer diameter 14mm flange diameter 20mm length 17mm colour: white SKU: 62731217](https://maedler.in/product/flange-bush-ep22-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-17mm-colour-white-sku-62731217/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 12mm outer diameter 14mm flange diameter 20mm length 15mm colour: white SKU: 62731215](https://maedler.in/product/flange-bush-ep22-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-15mm-colour-white-sku-62731215/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 12mm outer diameter 14mm flange diameter 20mm length 12mm colour: white SKU: 62731212](https://maedler.in/product/flange-bush-ep22-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-12mm-colour-white-sku-62731212/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 12mm outer diameter 14mm flange diameter 20mm length 9mm colour: white SKU: 62731209](https://maedler.in/product/flange-bush-ep22-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-9mm-colour-white-sku-62731209/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 12mm outer diameter 14mm flange diameter 20mm length 7mm colour: white SKU: 62731207](https://maedler.in/product/flange-bush-ep22-bore-12mm-outer-diameter-14mm-flange-diameter-20mm-length-7mm-colour-white-sku-62731207/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 10mm outer diameter 12mm flange diameter 18mm length 17mm colour: white SKU: 62731017](https://maedler.in/product/flange-bush-ep22-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-17mm-colour-white-sku-62731017/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 10mm outer diameter 12mm flange diameter 18mm length 15mm colour: white SKU: 62731015](https://maedler.in/product/flange-bush-ep22-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-15mm-colour-white-sku-62731015/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 10mm outer diameter 12mm flange diameter 18mm length 12mm colour: white SKU: 62731012](https://maedler.in/product/flange-bush-ep22-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-12mm-colour-white-sku-62731012/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 10mm outer diameter 12mm flange diameter 18mm length 9mm colour: white SKU: 62731009](https://maedler.in/product/flange-bush-ep22-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-9mm-colour-white-sku-62731009/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 10mm outer diameter 12mm flange diameter 18mm length 7mm colour: white SKU: 62731007](https://maedler.in/product/flange-bush-ep22-bore-10mm-outer-diameter-12mm-flange-diameter-18mm-length-7mm-colour-white-sku-62731007/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 8mm outer diameter 10mm flange diameter 15mm length 10mm colour: white SKU: 62730810](https://maedler.in/product/flange-bush-ep22-bore-8mm-outer-diameter-10mm-flange-diameter-15mm-length-10mm-colour-white-sku-62730810/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 8mm outer diameter 10mm flange diameter 15mm length 7.5mm colour: white SKU: 62730807](https://maedler.in/product/flange-bush-ep22-bore-8mm-outer-diameter-10mm-flange-diameter-15mm-length-7-5mm-colour-white-sku-62730807/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Flange bush EP22 bore 8mm outer diameter 10mm flange diameter 15mm length 5.5mm colour: white SKU: 62730805](https://maedler.in/product/flange-bush-ep22-bore-8mm-outer-diameter-10mm-flange-diameter-15mm-length-5-5mm-colour-white-sku-62730805/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing flange bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 60mm outer diameter 65mm length 60mm colour: white SKU: 62726060](https://maedler.in/product/bush-ep22-bore-60mm-outer-diameter-65mm-length-60mm-colour-white-sku-62726060/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 60mm outer diameter 65mm length 40mm colour: white SKU: 62726040](https://maedler.in/product/bush-ep22-bore-60mm-outer-diameter-65mm-length-40mm-colour-white-sku-62726040/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 50mm outer diameter 55mm length 50mm colour: white SKU: 62725050](https://maedler.in/product/bush-ep22-bore-50mm-outer-diameter-55mm-length-50mm-colour-white-sku-62725050/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 50mm outer diameter 55mm length 40mm colour: white SKU: 62725040](https://maedler.in/product/bush-ep22-bore-50mm-outer-diameter-55mm-length-40mm-colour-white-sku-62725040/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 40mm outer diameter 44mm length 40mm colour: white SKU: 62724040](https://maedler.in/product/bush-ep22-bore-40mm-outer-diameter-44mm-length-40mm-colour-white-sku-62724040/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 40mm outer diameter 44mm length 30mm colour: white SKU: 62724030](https://maedler.in/product/bush-ep22-bore-40mm-outer-diameter-44mm-length-30mm-colour-white-sku-62724030/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 30mm outer diameter 34mm length 30mm colour: white SKU: 62723030](https://maedler.in/product/bush-ep22-bore-30mm-outer-diameter-34mm-length-30mm-colour-white-sku-62723030/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 30mm outer diameter 34mm length 20mm colour: white SKU: 62723020](https://maedler.in/product/bush-ep22-bore-30mm-outer-diameter-34mm-length-20mm-colour-white-sku-62723020/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 25mm outer diameter 28mm length 20mm colour: white SKU: 62722520](https://maedler.in/product/bush-ep22-bore-25mm-outer-diameter-28mm-length-20mm-colour-white-sku-62722520/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 25mm outer diameter 28mm length 15mm colour: white SKU: 62722515](https://maedler.in/product/bush-ep22-bore-25mm-outer-diameter-28mm-length-15mm-colour-white-sku-62722515/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 20mm outer diameter 23mm length 30mm colour: white SKU: 62722030](https://maedler.in/product/bush-ep22-bore-20mm-outer-diameter-23mm-length-30mm-colour-white-sku-62722030/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 20mm outer diameter 23mm length 25mm colour: white SKU: 62722025](https://maedler.in/product/bush-ep22-bore-20mm-outer-diameter-23mm-length-25mm-colour-white-sku-62722025/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 20mm outer diameter 23mm length 20mm colour: white SKU: 62722020](https://maedler.in/product/bush-ep22-bore-20mm-outer-diameter-23mm-length-20mm-colour-white-sku-62722020/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 20mm outer diameter 23mm length 15mm colour: white SKU: 62722015](https://maedler.in/product/bush-ep22-bore-20mm-outer-diameter-23mm-length-15mm-colour-white-sku-62722015/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 20mm outer diameter 23mm length 10mm colour: white SKU: 62722010](https://maedler.in/product/bush-ep22-bore-20mm-outer-diameter-23mm-length-10mm-colour-white-sku-62722010/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 18mm outer diameter 20mm length 25mm colour: white SKU: 62721825](https://maedler.in/product/bush-ep22-bore-18mm-outer-diameter-20mm-length-25mm-colour-white-sku-62721825/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 18mm outer diameter 20mm length 20mm colour: white SKU: 62721820](https://maedler.in/product/bush-ep22-bore-18mm-outer-diameter-20mm-length-20mm-colour-white-sku-62721820/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 16mm outer diameter 18mm length 25mm colour: white SKU: 62721625](https://maedler.in/product/bush-ep22-bore-16mm-outer-diameter-18mm-length-25mm-colour-white-sku-62721625/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 16mm outer diameter 18mm length 20mm colour: white SKU: 62721620](https://maedler.in/product/bush-ep22-bore-16mm-outer-diameter-18mm-length-20mm-colour-white-sku-62721620/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 16mm outer diameter 18mm length 15mm colour: white SKU: 62721615](https://maedler.in/product/bush-ep22-bore-16mm-outer-diameter-18mm-length-15mm-colour-white-sku-62721615/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 15mm outer diameter 17mm length 25mm colour: white SKU: 62721525](https://maedler.in/product/bush-ep22-bore-15mm-outer-diameter-17mm-length-25mm-colour-white-sku-62721525/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Bush EP22 bore 15mm outer diameter 17mm length 20mm colour: white SKU: 62721520](https://maedler.in/product/bush-ep22-bore-15mm-outer-diameter-17mm-length-20mm-colour-white-sku-62721520/): Material: Thermoplast polybutylenterephthalat, modified (PBT + PTFE), white. Plain bearing bush made from thermoplastic with high dimension accuracy. Low friction. Specially suited for dry-running and for use at very low up to middle high temperatures. Good price/perfomance ratio with high dimension accuracy. Low friction, suitable also for lubrication-free running. Temperature range -50ºC bis + 170ºC.Operating Conditions: dry : very good. oiled: good. water: very good. field of aplication:Domestic appliances, chemical equipment, office equipment, sports equipment, automotive (pedals, steering, axes) and many more. - [Chain coupling type 5014 10 A-2 14 teeth nominal torque 250 Nm with casing SKU: 14035014](https://maedler.in/product/chain-coupling-type-5014-10-a-2-14-teeth-nominal-torque-250-nm-with-casing-sku-14035014/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 4016 08 A-2 16 teeth nominal torque 180 Nm with casing SKU: 14034016](https://maedler.in/product/chain-coupling-type-4016-08-a-2-16-teeth-nominal-torque-180-nm-with-casing-sku-14034016/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 4014 08 A-2 14 teeth nominal torque 150 Nm with casing SKU: 14034014](https://maedler.in/product/chain-coupling-type-4014-08-a-2-14-teeth-nominal-torque-150-nm-with-casing-sku-14034014/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 4012 08 A-2 12 teeth nominal torque 110 Nm with casing SKU: 14034012](https://maedler.in/product/chain-coupling-type-4012-08-a-2-12-teeth-nominal-torque-110-nm-with-casing-sku-14034012/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 3012 06 B-2 12 teeth nominal torque 45 Nm with casing SKU: 14033012](https://maedler.in/product/chain-coupling-type-3012-06-b-2-12-teeth-nominal-torque-45-nm-with-casing-sku-14033012/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling pitch 1"x17,02mm 18 teeth nominal torque 1480Nm SKU: 14031600](https://maedler.in/product/chain-coupling-pitch-1x1702mm-18-teeth-nominal-torque-1480nm-sku-14031600/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain coupling pitch 3/4 x 7/16" 18 teeth nominal torque 600Nm SKU: 14031200](https://maedler.in/product/chain-coupling-pitch-3-4-x-7-16-18-teeth-nominal-torque-600nm-sku-14031200/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain coupling pitch 5/8 x 3/8" 18 teeth nominal torque 380Nm SKU: 14030800](https://maedler.in/product/chain-coupling-pitch-5-8-x-3-8-18-teeth-nominal-torque-380nm-sku-14030800/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain coupling pitch 1/2 x 5/16" 18 teeth nominal torque 240Nm SKU: 14030400](https://maedler.in/product/chain-coupling-pitch-1-2-x-5-16-18-teeth-nominal-torque-240nm-sku-14030400/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain coupling pitch 3/8x7/32" 18 teeth nominal torque 95Nm SKU: 14030100](https://maedler.in/product/chain-coupling-pitch-3-8x7-32-18-teeth-nominal-torque-95nm-sku-14030100/): Material: Steel, with double-strand chain DIN ISO 606 (ex DIN 8187). The couplings are delivered unassembled. The chain is packed seperately. Number of teeth = 18. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. *Selection according to the ratio of driving power to speed (P/n), the nominal torque must not be exceeded (incl. operating factor). - [Chain tensioning wheel KSP 20 B-1 1 1/4x3/4" 13 teeth with ball bearing SKU: 14000900](https://maedler.in/product/chain-tensioning-wheel-ksp-20-b-1-1-1-4x3-4-13-teeth-with-ball-bearing-sku-14000900/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 16 B-1 1"x17,02mm 17 teeth with ball bearing SKU: 14000817](https://maedler.in/product/chain-tensioning-wheel-ksp-16-b-1-1x1702mm-17-teeth-with-ball-bearing-sku-14000817/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 16 B-1 1"x17,02mm 15 teeth with ball bearing SKU: 14000815](https://maedler.in/product/chain-tensioning-wheel-ksp-16-b-1-1x1702mm-15-teeth-with-ball-bearing-sku-14000815/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Mounting screw for chain tensioning wheels 140008xx and 14000900 SKU: 14000801](https://maedler.in/product/mounting-screw-for-chain-tensioning-wheels-140008xx-and-14000900-sku-14000801/): Material: Steel C45. Product No. 140 000 01: matching chain tensioning wheels Product No. 140 000 00 to 140 007 00. Product No. 140 008 01: matching chain tensioning wheel Product No. 140 008 00. - [Chain tensioning wheel KSP 16 B-1 1"x17,02mm 12 teeth with ball bearing SKU: 14000800](https://maedler.in/product/chain-tensioning-wheel-ksp-16-b-1-1x1702mm-12-teeth-with-ball-bearing-sku-14000800/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 12 B-1 3/4x7/16" 16 teeth with ball bearing SKU: 14000716](https://maedler.in/product/chain-tensioning-wheel-ksp-12-b-1-3-4x7-16-16-teeth-with-ball-bearing-sku-14000716/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 12 B-1 3/4x7/16" 13 teeth with ball bearing SKU: 14000713](https://maedler.in/product/chain-tensioning-wheel-ksp-12-b-1-3-4x7-16-13-teeth-with-ball-bearing-sku-14000713/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 12 B-1 3/4x7/16" 12 teeth with ball bearing SKU: 14000712](https://maedler.in/product/chain-tensioning-wheel-ksp-12-b-1-3-4x7-16-12-teeth-with-ball-bearing-sku-14000712/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 12 B-1 3/4x7/16" 15 teeth with ball bearing SKU: 14000700](https://maedler.in/product/chain-tensioning-wheel-ksp-12-b-1-3-4x7-16-15-teeth-with-ball-bearing-sku-14000700/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 21 teeth with ball bearing SKU: 14000621](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-21-teeth-with-ball-bearing-sku-14000621/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 18 teeth with ball bearing SKU: 14000618](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-18-teeth-with-ball-bearing-sku-14000618/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 16 teeth with ball bearing SKU: 14000616](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-16-teeth-with-ball-bearing-sku-14000616/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 15 teeth with ball bearing SKU: 14000615](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-15-teeth-with-ball-bearing-sku-14000615/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 14 teeth with ball bearing SKU: 14000614](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-14-teeth-with-ball-bearing-sku-14000614/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 13 teeth with ball bearing SKU: 14000613](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-13-teeth-with-ball-bearing-sku-14000613/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 10 B-1 5/8x3/8" 17 teeth with ball bearing SKU: 14000600](https://maedler.in/product/chain-tensioning-wheel-ksp-10-b-1-5-8x3-8-17-teeth-with-ball-bearing-sku-14000600/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 21 teeth with ball bearing SKU: 14000521](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-21-teeth-with-ball-bearing-sku-14000521/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 20 teeth with ball bearing SKU: 14000520](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-20-teeth-with-ball-bearing-sku-14000520/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 16 teeth with ball bearing SKU: 14000516](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-16-teeth-with-ball-bearing-sku-14000516/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 15 teeth with ball bearing SKU: 14000515](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-15-teeth-with-ball-bearing-sku-14000515/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 14 teeth with ball bearing SKU: 14000514](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-14-teeth-with-ball-bearing-sku-14000514/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 08 B-1 1/2x5/16" 18 teeth with ball bearing SKU: 14000500](https://maedler.in/product/chain-tensioning-wheel-ksp-08-b-1-1-2x5-16-18-teeth-with-ball-bearing-sku-14000500/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 083 1/2x3/16" 16 teeth with ball bearing SKU: 14000316](https://maedler.in/product/chain-tensioning-wheel-ksp-083-1-2x3-16-16-teeth-with-ball-bearing-sku-14000316/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 083 1/2x3/16" 18 teeth with ball bearing SKU: 14000300](https://maedler.in/product/chain-tensioning-wheel-ksp-083-1-2x3-16-18-teeth-with-ball-bearing-sku-14000300/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 081 1/2x1/8" 18 teeth with ball bearing SKU: 14000200](https://maedler.in/product/chain-tensioning-wheel-ksp-081-1-2x1-8-18-teeth-with-ball-bearing-sku-14000200/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 06 B-1 3/8x7/32" 20 teeth with ball bearing SKU: 14000120](https://maedler.in/product/chain-tensioning-wheel-ksp-06-b-1-3-8x7-32-20-teeth-with-ball-bearing-sku-14000120/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain tensioning wheel KSP 06 B-1 3/8x7/32" 21 teeth with ball bearing SKU: 14000100](https://maedler.in/product/chain-tensioning-wheel-ksp-06-b-1-3-8x7-32-21-teeth-with-ball-bearing-sku-14000100/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [mounting screw for chain tensioning wheels 14000000, 140001xx, 14000200, 140003xx, 140005xx, 140006xx and 140007xx SKU: 14000001](https://maedler.in/product/mounting-screw-for-chain-tensioning-wheels-14000000-140001xx-14000200-140003xx-140005xx-140006xx-and-140007xx-sku-14000001/): Material: Steel C45. Product No. 140 000 01: matching chain tensioning wheels Product No. 140 000 00 to 140 007 00. Product No. 140 008 01: matching chain tensioning wheel Product No. 140 008 00. - [Chain tensioning wheel KSP 05 B-1 pitch 8mm 23 teeth with ball bearing SKU: 14000000](https://maedler.in/product/chain-tensioning-wheel-ksp-05-b-1-pitch-8mm-23-teeth-with-ball-bearing-sku-14000000/): Material: Sprocket steel C45, black oxide finish. Bearing made from roller bearing steel. These chain tensioning wheels are ready-to-mount elements, complete with bearing. They are cost-efficient and can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with double front packing cover guarantee a high resistance against breakage and wear. The extra long internal ring makes the mounting on machines easy. Also suitable for agricultural and textile machines. Bearing requires no maintenance, as it is already supplied with a grease packing. Sprocket burnished. Temperatur range -20º to 120ºC. - [Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on both sides stainless steel 1.4301 SKU: 10899352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10899352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on one side stainless steel 1.4301 SKU: 10899351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10899351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10899332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10899332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10899331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10899331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K2 attachments wide version on both sides stainless steel 1.4301 SKU: 10899322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10899322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10899321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10899321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on both sides stainless steel 1.4301 SKU: 10899302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10899302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10899301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10899301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on both sides SKU: 10800352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m2-attachments-wide-version-on-both-sides-sku-10800352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on one side SKU: 10800351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m2-attachments-wide-version-on-one-side-sku-10800351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on both sides SKU: 10800332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m1-attachments-slim-version-on-both-sides-sku-10800332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on one side SKU: 10800331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-16-b-1-m1-attachments-slim-version-on-one-side-sku-10800331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 16 B-1-K2 attachments wide version on both sides SKU: 10800322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k2-attachments-wide-version-on-both-sides-sku-10800322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K2 attachments wide version on one side SKU: 10800321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k2-attachments-wide-version-on-one-side-sku-10800321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on both sides SKU: 10800302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k1-attachments-slim-version-on-both-sides-sku-10800302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on one side SKU: 10800301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-16-b-1-k1-attachments-slim-version-on-one-side-sku-10800301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 16 B-1-M2 6xp attachments wide version on both sides SKU: 10800056](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10800056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 6xp attachments wide version on one side SKU: 10800055](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10800055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 4xp attachments wide version on both sides SKU: 10800054](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10800054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 4xp attachments wide version on one side SKU: 10800053](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10800053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 2xp attachments wide version on both sides SKU: 10800052](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10800052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M2 2xp attachments wide version on one side SKU: 10800051](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m2-2xp-attachments-wide-version-on-one-side-sku-10800051/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 6xp attachments slim version on both sides SKU: 10800036](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-6xp-attachments-slim-version-on-both-sides-sku-10800036/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 6xp attachments slim version on one side SKU: 10800035](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-6xp-attachments-slim-version-on-one-side-sku-10800035/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 4xp attachments slim version on both sides SKU: 10800034](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-4xp-attachments-slim-version-on-both-sides-sku-10800034/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 4xp attachments slim version on one side SKU: 10800033](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-4xp-attachments-slim-version-on-one-side-sku-10800033/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 2xp attachments slim version on both sides SKU: 10800032](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-2xp-attachments-slim-version-on-both-sides-sku-10800032/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 16 B-1-M1 2xp attachments slim version on one side SKU: 10800031](https://maedler.in/product/roller-chain-with-straight-attachments-16-b-1-m1-2xp-attachments-slim-version-on-one-side-sku-10800031/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 6xp attachments wide version on both sides SKU: 10800026](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-6xp-attachments-wide-version-on-both-sides-sku-10800026/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 6xp attachments wide version on one side SKU: 10800025](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-6xp-attachments-wide-version-on-one-side-sku-10800025/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 4xp attachments wide version on both sides SKU: 10800024](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-4xp-attachments-wide-version-on-both-sides-sku-10800024/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 4xp attachments wide version on one side SKU: 10800023](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-4xp-attachments-wide-version-on-one-side-sku-10800023/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 2xp attachments wide version on both sides SKU: 10800022](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-2xp-attachments-wide-version-on-both-sides-sku-10800022/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K2 2xp attachments wide version on one side SKU: 10800021](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k2-2xp-attachments-wide-version-on-one-side-sku-10800021/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 6xp attachments slim version on both sides SKU: 10800006](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-6xp-attachments-slim-version-on-both-sides-sku-10800006/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 6xp attachments slim version on one side SKU: 10800005](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-6xp-attachments-slim-version-on-one-side-sku-10800005/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 4xp attachments slim version on both sides SKU: 10800004](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-4xp-attachments-slim-version-on-both-sides-sku-10800004/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 4xp attachments slim version on one side SKU: 10800003](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-4xp-attachments-slim-version-on-one-side-sku-10800003/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 2xp attachments slim version on both sides SKU: 10800002](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-2xp-attachments-slim-version-on-both-sides-sku-10800002/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with bent attachments 16 B-1-K1 2xp attachments slim version on one side SKU: 10800001](https://maedler.in/product/roller-chain-with-bent-attachments-16-b-1-k1-2xp-attachments-slim-version-on-one-side-sku-10800001/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links K1 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Chain connecting link type 11 / E with straight attachements 12 B-1-M2 attachements wide version on both sides stainless steel 1.4301 SKU: 10799352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachements-12-b-1-m2-attachements-wide-version-on-both-sides-stainless-steel-1-4301-sku-10799352/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachement 12 B-1-M2 attachement wide version on one side stainless steel 1.4301 SKU: 10799351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachement-12-b-1-m2-attachement-wide-version-on-one-side-stainless-steel-1-4301-sku-10799351/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 12 B-1-M1 attachments slim version on both sides stainless steel 1.4301 SKU: 10799332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-12-b-1-m1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10799332/): Material: Stainless steel 1.4301 (AISI 304). With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 12 B-1-M1 attachments slim version on one side stainless steel 1.4301 SKU: 10799331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-12-b-1-m1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10799331/): Material: Stainless steel 1.4301 (AISI 304).With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K2 attachments wide version on both sides stainless steel 1.4301 SKU: 10799322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k2-attachments-wide-version-on-both-sides-stainless-steel-1-4301-sku-10799322/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K2 attachments wide version on one side stainless steel 1.4301 SKU: 10799321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k2-attachments-wide-version-on-one-side-stainless-steel-1-4301-sku-10799321/): Material: Stainless steel 1.4301.With spring clip. For stainless simplex roller chains. With good chemical resistance.Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on both sides stainless steel 1.4301 SKU: 10799302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k1-attachments-slim-version-on-both-sides-stainless-steel-1-4301-sku-10799302/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on one side stainless steel 1.4301 SKU: 10799301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k1-attachments-slim-version-on-one-side-stainless-steel-1-4301-sku-10799301/): Material: Stainless steel 1.4301. With spring clip. For stainless simplex roller chains. With good chemical resistance. Main dimensions according to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachements 12 B-1-M2 attachements wide version on both sides SKU: 10700352](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachements-12-b-1-m2-attachements-wide-version-on-both-sides-sku-10700352/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachement 12 B-1-M2 attachement wide version on one side SKU: 10700351](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachement-12-b-1-m2-attachement-wide-version-on-one-side-sku-10700351/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 12 B-1-M1 attachments slim version on both sides SKU: 10700332](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-12-b-1-m1-attachments-slim-version-on-both-sides-sku-10700332/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with straight attachments 12 B-1-M1 attachments slim version on one side SKU: 10700331](https://maedler.in/product/chain-connecting-link-type-11-e-with-straight-attachments-12-b-1-m1-attachments-slim-version-on-one-side-sku-10700331/): Material: Special chain steel.With spring clip.According to DIN ISO 606 (ex DIN 8187) - [Chain connecting link type 11 / E with bent attachments 12 B-1-K2 attachments wide version on both sides SKU: 10700322](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k2-attachments-wide-version-on-both-sides-sku-10700322/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K2 attachments wide version on one side SKU: 10700321](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k2-attachments-wide-version-on-one-side-sku-10700321/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on both sides SKU: 10700302](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k1-attachments-slim-version-on-both-sides-sku-10700302/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Chain connecting link type 11 / E with bent attachments 12 B-1-K1 attachments slim version on one side SKU: 10700301](https://maedler.in/product/chain-connecting-link-type-11-e-with-bent-attachments-12-b-1-k1-attachments-slim-version-on-one-side-sku-10700301/): Material: Special chain steel. With spring clip. According to DIN ISO 606 (ex DIN 8187). - [Roller chain with straight attachments 12 B-1-M2 6xp attachments wide version on both sides SKU: 10700056](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-6xp-attachments-wide-version-on-both-sides-sku-10700056/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M2 6xp attachments wide version on one side SKU: 10700055](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-6xp-attachments-wide-version-on-one-side-sku-10700055/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 6 x p (attachment at every third outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M2 4xp attachments wide version on both sides SKU: 10700054](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-4xp-attachments-wide-version-on-both-sides-sku-10700054/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M2 4xp attachments wide version on one side SKU: 10700053](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-4xp-attachments-wide-version-on-one-side-sku-10700053/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 4 x p (attachment at every second outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links 11/E have to be ordered separately. * The marked dimensions are not listed in the DIN. - [Roller chain with straight attachments 12 B-1-M2 2xp attachments wide version on both sides SKU: 10700052](https://maedler.in/product/roller-chain-with-straight-attachments-12-b-1-m2-2xp-attachments-wide-version-on-both-sides-sku-10700052/): Material: Special chain steels. According to DIN ISO 606 (ex DIN 8187). Attachment distance 2 x p (attachment at every outer link). Other attachment distances can be supplied at short notice. Different attachment sizes and special chains on request. Connecting links M2 have to be ordered separately. * The marked dimensions are not listed in the DIN. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 90mm width 23mm open (unsealed) SKU: 6308-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-90mm-width-23mm-open-unsealed-sku-6308-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 90mm width 23mm open (unsealed) clearance C3 SKU: 6308-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-90mm-width-23mm-open-unsealed-clearance-c3-sku-6308-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Double universal joint WDL similar to DIN808 bore 30H7 material steel total length 182mm outer diameter 58mm SKU: 63075800](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-30h7-material-steeltotal-length-182mm-outer-diameter-58mm-sku-63075800/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63075000N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63075000n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 25H7 material steel total length 163mm outer diameter 50mm SKU: 63075000](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-25h7-material-steeltotal-length-163mm-outer-diameter-50mm-sku-63075000/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 22H7 material steel total length 145mm outer diameter 40mm SKU: 63074100](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-22h7-material-steeltotal-length-145mm-outer-diameter-40mm-sku-63074100/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 20H7 material steel total length 128mm outer diameter 40mm SKU: 63074000](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-20h7-material-steeltotal-length-128mm-outer-diameter-40mm-sku-63074000/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63073200N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63073200n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 18H7 material steel total length 112mm outer diameter 32mm SKU: 63073200](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-18h7-material-steeltotal-length-112mm-outer-diameter-32mm-sku-63073200/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63072900N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63072900n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 14H7 material steel total length 85mm outer diameter 25mm SKU: 63072500](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-14h7-material-steeltotal-length-85mm-outer-diameter-25mm-sku-63072500/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63072200N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63072200n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 12H7 material steel total length 74mm outer diameter 22mm SKU: 63072200](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-12h7-material-steeltotal-length-74mm-outer-diameter-22mm-sku-63072200/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 10H7 material steel total length 74mm outer diameter 20mm SKU: 63072000](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-10h7-material-steeltotal-length-74mm-outer-diameter-20mm-sku-63072000/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 80mm width 21mm shielded on both sides SKU: 6307-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-80mm-width-21mm-shielded-on-both-sides-sku-6307-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [clearance C3SKF deep groove ball bearing single row inner diameter 35mm outer diameter 80mm width 21mm shielded on both sides SKU: 6307-2Z-C3-SKF](https://maedler.in/product/clearance-c3skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-80mm-width-21mm-shielded-on-both-sides-sku-6307-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 80mm width 21mm sealed on both sides SKU: 6307-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-80mm-width-21mm-sealed-on-both-sides-sku-6307-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 80mm width 21mm sealed on both sides clearance C3 SKU: 6307-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-80mm-width-21mm-sealed-on-both-sides-clearance-c3-sku-6307-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 80mm width 21mm sealed on both sides SKU: 6307-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-80mm-width-21mm-sealed-on-both-sides-sku-6307-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Double universal joint WDL similar to DIN808 bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63071600N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63071600n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 8H7 material steel total length 67mm outer diameter 16mm SKU: 63071600](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-8h7-material-steeltotal-length-67mm-outer-diameter-16mm-sku-63071600/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 6H7 material steel total length 63mm outer diameter 13mm SKU: 63071300](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-6h7-material-steeltotal-length-63mm-outer-diameter-13mm-sku-63071300/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 80mm width 21mm open (unsealed) SKU: 6307-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-80mm-width-21mm-open-unsealed-sku-6307-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 80mm width 21mm open (unsealed) clearance C3 SKU: 6307-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-80mm-width-21mm-open-unsealed-clearance-c3-sku-6307-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Single universal joint WEL similar to DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63065800N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63065800n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 30H7 material: steel total length 122mm outer diameter 58mm SKU: 63065800](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-30h7-material-steeltotal-length-122mm-outer-diameter-58mm-sku-63065800/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63065000N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63065000n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 25H7 material steel total length 108mm outer diameter 50mm SKU: 63065000](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-25h7-material-steeltotal-length-108mm-outer-diameter-50mm-sku-63065000/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 22H7 material steel total length 95mm outer diameter 47mm SKU: 63064700](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-22h7-material-steeltotal-length-95mm-outer-diameter-47mm-sku-63064700/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63064000N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63064000n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 20H7 material steel total length 82mm outer diameter 40mm SKU: 63064000](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-20h7-material-steeltotal-length-82mm-outer-diameter-40mm-sku-63064000/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63063700N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63063700n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 18H7 material steel total length 72mm outer diameter 37mm SKU: 63063700](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-18h7-material-steeltotal-length-72mm-outer-diameter-37mm-sku-63063700/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 16H7 material steel total length 65mm outer diameter 32mm SKU: 63063200](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-16h7-material-steeltotal-length-65mm-outer-diameter-32mm-sku-63063200/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 14H7 material steel total length 56mm outer diameter 29mm SKU: 63062900](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-14h7-material-steeltotal-length-56mm-outer-diameter-29mm-sku-63062900/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63062500N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63062500n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 12H7 material steel total length 50mm outer diameter 25mm SKU: 63062500](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-12h7-material-steeltotal-length-50mm-outer-diameter-25mm-sku-63062500/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 10H7 material steel total length 45mm outer diameter 20mm SKU: 63062000](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-10h7-material-steeltotal-length-45mm-outer-diameter-20mm-sku-63062000/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 72mm width 19mm shielded on both sides SKU: 6306-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-72mm-width-19mm-shielded-on-both-sides-sku-6306-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 72mm width 19mm shielded on both sides clearance C3 SKU: 6306-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-72mm-width-19mm-shielded-on-both-sides-clearance-c3-sku-6306-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 72mm width 19mm sealed on both sides SKU: 6306-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-72mm-width-19mm-sealed-on-both-sides-sku-6306-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 72mm width 19mm sealed on both sides clearance C3 SKU: 6306-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-72mm-width-19mm-sealed-on-both-sides-clearance-c3-sku-6306-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 72mm width 19mm sealed on both sides SKU: 6306-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-72mm-width-19mm-sealed-on-both-sides-sku-6306-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Single universal joint WEL similar to DIN808 bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63061600N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63061600n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 8H7 material steel total length 40mm outer diameter 16mm SKU: 63061600](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-8h7-material-steeltotal-length-40mm-outer-diameter-16mm-sku-63061600/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 6H7 material steel total length 40mm outer diameter 13mm SKU: 63061300](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-6h7-material-steeltotal-length-40mm-outer-diameter-13mm-sku-63061300/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals Optionally without or with keyway DIN 6885-1, on both sides. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 72mm width 19mm open (unsealed) SKU: 6306-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-72mm-width-19mm-open-unsealed-sku-6306-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 72mm width 19mm open (unsealed) clearance C3 SKU: 6306-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-72mm-width-19mm-open-unsealed-clearance-c3-sku-6306-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 62mm width 17mm shielded on both sides SKU: 6305-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-62mm-width-17mm-shielded-on-both-sides-sku-6305-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 62mm width 17mm shielded on both sides clearance C3 SKU: 6305-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-62mm-width-17mm-shielded-on-both-sides-clearance-c3-sku-6305-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 62mm width 17mm sealed on both sides SKU: 6305-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-62mm-width-17mm-sealed-on-both-sides-sku-6305-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 62mm width 17mm sealed on both sides clearance C3 SKU: 6305-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-62mm-width-17mm-sealed-on-both-sides-clearance-c3-sku-6305-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 62mm width 17mm sealed on both sides SKU: 6305-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-62mm-width-17mm-sealed-on-both-sides-sku-6305-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 62mm width 17mm shielded on both sides SKU: 6305-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-62mm-width-17mm-shielded-on-both-sides-sku-6305-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 62mm width 17mm open (unsealed) SKU: 6305-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-62mm-width-17mm-open-unsealed-sku-6305-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 62mm width 17mm open (unsealed) clearance C3 SKU: 6305-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-62mm-width-17mm-open-unsealed-clearance-c3-sku-6305-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm shielded on both sides SKU: 6304-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-sku-6304-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm shielded on both sides clearance C3 SKU: 6304-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-clearance-c3-sku-6304-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm sealed on both sides SKU: 6304-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-sku-6304-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm sealed on both sides SKU: 6304-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-sku-6304-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm sealed on both sides clearance C3 SKU: 6304-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-clearance-c3-sku-6304-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm sealed on both sides clearance C3 SKU: 6304-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-clearance-c3-sku-6304-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm shielded on both sides SKU: 6304-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-sku-6304-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm shielded on both sides clearance C3 SKU: 6304-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-clearance-c3-sku-6304-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm open (unsealed) SKU: 6304-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-open-unsealed-sku-6304-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 52mm width 15mm open (unsealed) clearance C3 SKU: 6304-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-52mm-width-15mm-open-unsealed-clearance-c3-sku-6304-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Double universal joint UKD both-sided bore 10mm length 89.8mm ends with metal cap SKU: 63034500](https://maedler.in/product/double-universal-joint-ukd-both-sided-bore-10mm-length-89-8mm-ends-with-metal-cap-sku-63034500/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 90°. These cardan joints are fixed on the shafts with Allen screws. - [Double universal joint UKD both-sided bore 8mm length 89.8mm ends with metal cap SKU: 63034400](https://maedler.in/product/double-universal-joint-ukd-both-sided-bore-8mm-length-89-8mm-ends-with-metal-cap-sku-63034400/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 90°. These cardan joints are fixed on the shafts with Allen screws. - [Double universal joint UKD both-sided bore 6mm length 89.8mm ends with metal cap SKU: 63034300](https://maedler.in/product/double-universal-joint-ukd-both-sided-bore-6mm-length-89-8mm-ends-with-metal-cap-sku-63034300/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 90°. These cardan joints are fixed on the shafts with Allen screws. - [Double universal joint UKD both-sided bore 6mm length 62.1mm ends with metal cap SKU: 63034000](https://maedler.in/product/double-universal-joint-ukd-both-sided-bore-6mm-length-62-1mm-ends-with-metal-cap-sku-63034000/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 90°. These cardan joints are fixed on the shafts with Allen screws. - [Double universal joint UKD both-sided bore 4mm length 62.1mm ends with metal cap SKU: 63033900](https://maedler.in/product/double-universal-joint-ukd-both-sided-bore-4mm-length-62-1mm-ends-with-metal-cap-sku-63033900/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 90°. These cardan joints are fixed on the shafts with Allen screws. - [Double universal joint UKD both-sided bores 5mm length 50.8mm ends with metal cap SKU: 63033600](https://maedler.in/product/double-universal-joint-ukd-both-sided-bores-5mm-length-50-8mm-ends-with-metal-cap-sku-63033600/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 90°. These cardan joints are fixed on the shafts with Allen screws. - [Double universal joint UKD both-sided bore 4mm length 50.8mm ends with metal cap SKU: 63033500](https://maedler.in/product/double-universal-joint-ukd-both-sided-bore-4mm-length-50-8mm-ends-with-metal-cap-sku-63033500/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 90°. These cardan joints are fixed on the shafts with Allen screws. - [Double universal joint UKD Both-sided bore 3mm length 50.8mm ends with metal cap SKU: 63033400](https://maedler.in/product/double-universal-joint-ukd-both-sided-bore-3mm-length-50-8mm-ends-with-metal-cap-sku-63033400/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 90°. These cardan joints are fixed on the shafts with Allen screws. - [Double universal joint UKD Both-sided bore 3mm length 35.3mm ends with metal cap SKU: 63033100](https://maedler.in/product/double-universal-joint-ukd-both-sided-bore-3mm-length-35-3mm-ends-with-metal-cap-sku-63033100/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 90°. These cardan joints are fixed on the shafts with Allen screws. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 47mm width 14mm shielded on both sides SKU: 6303-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-sku-6303-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 47mm width 14mm shielded on both sides clearance C3 SKU: 6303-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-clearance-c3-sku-6303-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 47mm width 14mm sealed on both sides SKU: 6303-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-sku-6303-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 47mm width 14mm sealed on both sides clearance C3 SKU: 6303-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-clearance-c3-sku-6303-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 47mm width 14mm shielded on both sides SKU: 6303-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-sku-6303-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 47mm width 14mm open (unsealed) SKU: 6303-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-47mm-width-14mm-open-unsealed-sku-6303-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 47mm width 14mm open (unsealed) clearance C3 SKU: 6303-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-47mm-width-14mm-open-unsealed-clearance-c3-sku-6303-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Cardan joint UKM both sides bore 10mm ends with metal cap SKU: 63024500](https://maedler.in/product/cardan-joint-ukm-both-sides-bore-10mm-ends-with-metal-cap-sku-63024500/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 45°. These cardan joints are fixed on the shafts with Allen screws. - [Cardan joint UKM both sides bore 8mm ends with metal cap SKU: 63024400](https://maedler.in/product/cardan-joint-ukm-both-sides-bore-8mm-ends-with-metal-cap-sku-63024400/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 45°. These cardan joints are fixed on the shafts with Allen screws. - [Cardan joint UKM both sides bore 6mm ends with metal cap SKU: 63024300](https://maedler.in/product/cardan-joint-ukm-both-sides-bore-6mm-ends-with-metal-cap-sku-63024300/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 45°. These cardan joints are fixed on the shafts with Allen screws. - [Cardan joint UKM both sides bore 6mm ends with metal cap SKU: 63024000](https://maedler.in/product/cardan-joint-ukm-both-sides-bore-6mm-ends-with-metal-cap-sku-63024000/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 45°. These cardan joints are fixed on the shafts with Allen screws. - [Cardan joint UKM both sides bore 4mm ends with metal cap SKU: 63023900](https://maedler.in/product/cardan-joint-ukm-both-sides-bore-4mm-ends-with-metal-cap-sku-63023900/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 45°. These cardan joints are fixed on the shafts with Allen screws. - [Cardan joint UKM both sides bore 4mm ends with metal cap SKU: 63023500](https://maedler.in/product/cardan-joint-ukm-both-sides-bore-4mm-ends-with-metal-cap-sku-63023500/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 45°. These cardan joints are fixed on the shafts with Allen screws. - [Cardan joint UKM both sides bore 3mm ends with metal cap SKU: 63023400](https://maedler.in/product/cardan-joint-ukm-both-sides-bore-3mm-ends-with-metal-cap-sku-63023400/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 45°. These cardan joints are fixed on the shafts with Allen screws. - [Cardan joint UKM both sides bore 3mm ends with metal cap SKU: 63023100](https://maedler.in/product/cardan-joint-ukm-both-sides-bore-3mm-ends-with-metal-cap-sku-63023100/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 45°. These cardan joints are fixed on the shafts with Allen screws. - [Cardan joint UKM both sides bore 2mm ends with metal cap SKU: 63023000](https://maedler.in/product/cardan-joint-ukm-both-sides-bore-2mm-ends-with-metal-cap-sku-63023000/): Material: Plastic acetal-homopolymer with metal caps worked into the ends. Metal caps and crosspiece made of brass. Max. Operating Angle 45°. These cardan joints are fixed on the shafts with Allen screws. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 42mm width 13mm shielded on both sides SKU: 6302-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-42mm-width-13mm-shielded-on-both-sides-sku-6302-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 42mm width 13mm shielded on both sides clearance C3 SKU: 6302-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-42mm-width-13mm-shielded-on-both-sides-clearance-c3-sku-6302-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 42mm width 13mm sealed on both sides SKU: 6302-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-42mm-width-13mm-sealed-on-both-sides-sku-6302-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 42mm width 13mm sealed on both sides SKU: 6302-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-42mm-width-13mm-sealed-on-both-sides-sku-6302-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 42mm width 13mm sealed on both sides clearance C3 SKU: 6302-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-42mm-width-13mm-sealed-on-both-sides-clearance-c3-sku-6302-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 42mm width 13mm shielded on both sides SKU: 6302-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-42mm-width-13mm-shielded-on-both-sides-sku-6302-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 42mm width 13mm open (unsealed) SKU: 6302-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-42mm-width-13mm-open-unsealed-sku-6302-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 42mm width 13mm open (unsealed) clearance C3 SKU: 6302-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-42mm-width-13mm-open-unsealed-clearance-c3-sku-6302-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Cardan joint KE outer diameter 63mm bore 40H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63016300N](https://maedler.in/product/cardan-joint-ke-outer-diameter-63mm-bore-40h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63016300n/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Typ A: without bores. Type B: with bores. Type N: with bores and keyways DIN 6885-1 on both sides. - [Chain tensioner SPANN-BOY® TS 06 B-3 SKU: 14040831](https://maedler.in/product/chain-tensioner-spann-boy-ts-06-b-3-sku-14040831/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 05 B-3 SKU: 14040830](https://maedler.in/product/chain-tensioner-spann-boy-ts-05-b-3-sku-14040830/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 10 B-2 SKU: 14040826](https://maedler.in/product/chain-tensioner-spann-boy-ts-10-b-2-sku-14040826/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 08 B-2 SKU: 14040825](https://maedler.in/product/chain-tensioner-spann-boy-ts-08-b-2-sku-14040825/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 06 B-2 SKU: 14040821](https://maedler.in/product/chain-tensioner-spann-boy-ts-06-b-2-sku-14040821/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 12 B-1 SKU: 14040807](https://maedler.in/product/chain-tensioner-spann-boy-ts-12-b-1-sku-14040807/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 10 B-1 SKU: 14040806](https://maedler.in/product/chain-tensioner-spann-boy-ts-10-b-1-sku-14040806/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 08 B-1 SKU: 14040805](https://maedler.in/product/chain-tensioner-spann-boy-ts-08-b-1-sku-14040805/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS up to 06 B-1 SKU: 14040801](https://maedler.in/product/chain-tensioner-spann-boy-ts-up-to-06-b-1-sku-14040801/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-3 stainless steel SKU: 14040737](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-3-stainless-steel-sku-14040737/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-3 stainless steel SKU: 14040736](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-3-stainless-steel-sku-14040736/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-3 stainless steel SKU: 14040735](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-3-stainless-steel-sku-14040735/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 06 B-3 stainless steel SKU: 14040731](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-06-b-3-stainless-steel-sku-14040731/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 16 B-2 stainless steel SKU: 14040728](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-16-b-2-stainless-steel-sku-14040728/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-2 stainless steel SKU: 14040727](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-2-stainless-steel-sku-14040727/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-2 stainless steel SKU: 14040726](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-2-stainless-steel-sku-14040726/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-2 stainless steel SKU: 14040725](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-2-stainless-steel-sku-14040725/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 06 B-2 stainless steel SKU: 14040721](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-06-b-2-stainless-steel-sku-14040721/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 20 B-1 stainless steel SKU: 14040709](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-20-b-1-stainless-steel-sku-14040709/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 16 B-1 stainless steel SKU: 14040708](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-16-b-1-stainless-steel-sku-14040708/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-1 stainless steel SKU: 14040707](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-1-stainless-steel-sku-14040707/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-1 stainless steel SKU: 14040706](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-1-stainless-steel-sku-14040706/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-1 stainless steel SKU: 14040705](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-1-stainless-steel-sku-14040705/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force up to 06 B-1 stainless steel SKU: 14040701](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-up-to-06-b-1-stainless-steel-sku-14040701/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-3 SKU: 14040637](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-3-sku-14040637/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-3 SKU: 14040636](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-3-sku-14040636/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-3 SKU: 14040635](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-3-sku-14040635/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 06 B-3 SKU: 14040631](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-06-b-3-sku-14040631/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 16 B-2 SKU: 14040628](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-16-b-2-sku-14040628/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-2 SKU: 14040627](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-2-sku-14040627/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-2 SKU: 14040626](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-2-sku-14040626/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-2 SKU: 14040625](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-2-sku-14040625/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 06 B-2 SKU: 14040621](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-06-b-2-sku-14040621/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 20 B-1 SKU: 14040609](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-20-b-1-sku-14040609/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 16 B-1 SKU: 14040608](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-16-b-1-sku-14040608/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 12 B-1 SKU: 14040607](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-12-b-1-sku-14040607/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 10 B-1 SKU: 14040606](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-10-b-1-sku-14040606/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force 08 B-1 SKU: 14040605](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-08-b-1-sku-14040605/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 long high tensioning force up to 06 B-1 SKU: 14040601](https://maedler.in/product/chain-tensioner-spann-box-size-1-long-high-tensioning-force-up-to-06-b-1-sku-14040601/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-3 stainless steel SKU: 14040537](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-3-stainless-steel-sku-14040537/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-3 stainless steel SKU: 14040536](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-3-stainless-steel-sku-14040536/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-3 stainless steel SKU: 14040535](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-3-stainless-steel-sku-14040535/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 06 B-3 stainless steel SKU: 14040531](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-06-b-3-stainless-steel-sku-14040531/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 16 B-2 stainless steel SKU: 14040528](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-16-b-2-stainless-steel-sku-14040528/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-2 stainless steel SKU: 14040527](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-2-stainless-steel-sku-14040527/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-2 stainless steel SKU: 14040526](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-2-stainless-steel-sku-14040526/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-2 stainless steel SKU: 14040525](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-2-stainless-steel-sku-14040525/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 06 B-2 stainless steel SKU: 14040521](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-06-b-2-stainless-steel-sku-14040521/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 20 B-1 stainless steel SKU: 14040509](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-20-b-1-stainless-steel-sku-14040509/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 16 B-1 stainless steel SKU: 14040508](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-16-b-1-stainless-steel-sku-14040508/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-1 stainless steel SKU: 14040507](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-1-stainless-steel-sku-14040507/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-1 stainless steel SKU: 14040506](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-1-stainless-steel-sku-14040506/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-1 stainless steel SKU: 14040505](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-1-stainless-steel-sku-14040505/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force up to 06 B-1 stainless steel SKU: 14040501](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-up-to-06-b-1-stainless-steel-sku-14040501/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-3 SKU: 14040437](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-3-sku-14040437/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-3 SKU: 14040436](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-3-sku-14040436/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-3 SKU: 14040435](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-3-sku-14040435/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 06 B-3 SKU: 14040431](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-06-b-3-sku-14040431/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 16 B-2 SKU: 14040428](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-16-b-2-sku-14040428/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-2 SKU: 14040427](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-2-sku-14040427/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-2 SKU: 14040426](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-2-sku-14040426/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-2 SKU: 14040425](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-2-sku-14040425/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 06 B-2 SKU: 14040421](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-06-b-2-sku-14040421/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 20 B-1 SKU: 14040409](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-20-b-1-sku-14040409/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 16 B-1 SKU: 14040408](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-16-b-1-sku-14040408/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-1 SKU: 14040407](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-12-b-1-sku-14040407/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-1 SKU: 14040406](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-10-b-1-sku-14040406/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-1 SKU: 14040405](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-08-b-1-sku-14040405/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short high tensioning force up to 06 B-1 SKU: 14040401](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-high-tensioning-force-up-to-06-b-1-sku-14040401/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 12 B-3 SKU: 14040337](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-12-b-3-sku-14040337/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 10 B-3 SKU: 14040336](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-10-b-3-sku-14040336/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 08 B-3 SKU: 14040335](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-08-b-3-sku-14040335/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 06 B-3 SKU: 14040331](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-06-b-3-sku-14040331/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 16 B-2 SKU: 14040328](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-16-b-2-sku-14040328/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.   These ready-to-install tensioners enable noise reduction and wear reduction at chain drives. With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated. With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low. Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm. Interchangeable with similar parts of other suppliers.   Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 12 B-2 SKU: 14040327](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-12-b-2-sku-14040327/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 10 B-2 SKU: 14040326](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-10-b-2-sku-14040326/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 08 B-2 SKU: 14040325](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-08-b-2-sku-14040325/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 06 B-2 SKU: 14040321](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-06-b-2-sku-14040321/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 20 B-1 SKU: 14040309](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-20-b-1-sku-14040309/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 16 B-1 SKU: 14040308](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-16-b-1-sku-14040308/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 12 B-1 SKU: 14040307](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-12-b-1-sku-14040307/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.   These ready-to-install tensioners enable noise reduction and wear reduction at chain drives. With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated. With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low. Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm. Interchangeable with similar parts of other suppliers.   Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 10 B-1 SKU: 14040306](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-10-b-1-sku-14040306/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force 08 B-1 SKU: 14040305](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-08-b-1-sku-14040305/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 1 short low tensioning force up to 06 B-1 SKU: 14040301](https://maedler.in/product/chain-tensioner-spann-box-size-1-short-low-tensioning-force-up-to-06-b-1-sku-14040301/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install tensioners enable noise reduction and wear reduction at chain drives.With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 10 B-2 SKU: 14040226](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-10-b-2-sku-14040226/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 08 B-2 SKU: 14040225](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-08-b-2-sku-14040225/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 06 B-2 SKU: 14040221](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-06-b-2-sku-14040221/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 12 B-1 SKU: 14040207](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-12-b-1-sku-14040207/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force 08 B-1 and 10 B-1 SKU: 14040205](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-08-b-1-and-10-b-1-sku-14040205/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 high tensioning force up to 06 B-1 SKU: 14040201](https://maedler.in/product/chain-tensioner-spann-box-size-0-high-tensioning-force-up-to-06-b-1-sku-14040201/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force 10 B-2 SKU: 14040126](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-10-b-2-sku-14040126/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force 08 B-2 SKU: 14040125](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-08-b-2-sku-14040125/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force 06 B-2 SKU: 14040121](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-06-b-2-sku-14040121/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force 12 B-1 SKU: 14040107](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-12-b-1-sku-14040107/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® Size 0 low tensioning force 08 B-1 and 10 B-1 SKU: 14040105](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-08-b-1-and-10-b-1-sku-14040105/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOX® size 0 low tensioning force up to 06 B-1 SKU: 14040101](https://maedler.in/product/chain-tensioner-spann-box-size-0-low-tensioning-force-up-to-06-b-1-sku-14040101/): Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain coupling type 6020 12 A-2 20 teeth nominal torque 770 Nm with casing SKU: 14036020](https://maedler.in/product/chain-coupling-type-6020-12-a-2-20-teeth-nominal-torque-770-nm-with-casing-sku-14036020/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing SKU: 14036018](https://maedler.in/product/chain-coupling-type-6018-12-a-2-18-teeth-nominal-torque-630-nm-with-casing-sku-14036018/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 5018 10 A-2 18 teeth nominal torque 380 Nm with casing SKU: 14035018](https://maedler.in/product/chain-coupling-type-5018-10-a-2-18-teeth-nominal-torque-380-nm-with-casing-sku-14035018/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Chain coupling type 5016 10 A-2 16 teeth nominal torque 300 Nm with casing SKU: 14035016](https://maedler.in/product/chain-coupling-type-5016-10-a-2-16-teeth-nominal-torque-300-nm-with-casing-sku-14035016/): Material: Chain wheels made of steel, with hardened teeth. Chain made from steel, with clip link. Casing made from aluminium, yellow painted, with o-rings. The couplings are delivered unassembled. The chain wheels are with pre-borehole. The chain and the chain connection link are unmounted. Before using, the casing has to be filled by the customer with grease. -Elastic transmission of torque. -Fast declutching by simply loosening the chain. -Shafts do not need to be exactly aligned. -No axial shaft clearance permissible. Temperature range: -30°C to +220°C. - [Slip shaft LW with ball joints bore 12H7 with keyway DIN 6885-1 on both sides outer diameter 24mm steel SKU: 63152400N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-12h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-24mm-steel-sku-63152400n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 12H7 outer diameter 24mm steel SKU: 63152400](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-12h7-outer-diameter-24mm-steel-sku-63152400/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 10H7 with keyway DIN 6885-1 on both sides outer diameter 20mm steel SKU: 63152000N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-10h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-20mm-steel-sku-63152000n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 10H7 outer diameter 20mm steel SKU: 63152000](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-10h7-outer-diameter-20mm-steel-sku-63152000/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Ball joint GF bore 16mm total length 74mm outer diameter 25mm material: plastic SKU: 63142500](https://maedler.in/product/ball-joint-gf-bore-16mm-total-length-74mm-outer-diameter-25mm-material-plastic-sku-63142500/): Material: Polyacetal, glas-fibre reinforced. Temperature range: -30°C to +50°C. Max. operating angle 35°. Dimensioned according to DIN 808. For the joining taper pins, dowel pins or grooved pins can be used. The joints are maintenance free and can therefore be used in difficult-to-access parts of the machine. Other advantages compared to steel are less weight, corrosion resistance and chemical resistance. - [Ball joint GF bore 12mm total length 61mm outer diameter 20mm material: plastic SKU: 63142000](https://maedler.in/product/ball-joint-gf-bore-12mm-total-length-61mm-outer-diameter-20mmmaterial-plastic-sku-63142000/): Material: Polyacetal, glas-fibre reinforced. Temperature range: -30°C to +50°C. Max. operating angle 35°. Dimensioned according to DIN 808. For the joining taper pins, dowel pins or grooved pins can be used. The joints are maintenance free and can therefore be used in difficult-to-access parts of the machine. Other advantages compared to steel are less weight, corrosion resistance and chemical resistance. - [Ball joint GF bore 8mm total length 40mm outer diameter 16mm material: plastic SKU: 63141600](https://maedler.in/product/ball-joint-gf-bore-8mm-total-length-40mm-outer-diameter-16mm-material-plastic-sku-63141600/): Material: Polyacetal, glas-fibre reinforced. Temperature range: -30°C to +50°C. Max. operating angle 35°. Dimensioned according to DIN 808. For the joining taper pins, dowel pins or grooved pins can be used. The joints are maintenance free and can therefore be used in difficult-to-access parts of the machine. Other advantages compared to steel are less weight, corrosion resistance and chemical resistance. - [Ball joint RW bore 45H7 material steel outer diameter 70mm total length 210mm SKU: 63137000](https://maedler.in/product/ball-joint-rw-bore-45h7-material-steelouter-diameter-70mm-total-length-210mm-sku-63137000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 40H7 material steel outer diameter 65mm total length 190mm SKU: 63136500](https://maedler.in/product/ball-joint-rw-bore-40h7-material-steelouter-diameter-65mm-total-length-190mm-sku-63136500/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 35H7 material steel outer diameter 60mm total length 165mm SKU: 63136000](https://maedler.in/product/ball-joint-rw-bore-35h7-material-steelouter-diameter-60mm-total-length-165mm-sku-63136000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 30H7 material steel outer diameter 55mm total length 135mm SKU: 63135500](https://maedler.in/product/ball-joint-rw-bore-30h7-material-steelouter-diameter-55mm-total-length-135mm-sku-63135500/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 25H7 material steel outer diameter 50mm total length 125mm SKU: 63135000](https://maedler.in/product/ball-joint-rw-bore-25h7-material-steelouter-diameter-50mm-total-length-125mm-sku-63135000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 22H7 with keyway DIN 6885-1 on both sides outer diameter 45mm steel SKU: 63134500N](https://maedler.in/product/ball-joint-rw-bore-22h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-45mm-steel-sku-63134500n/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 22H7 material steel outer diameter 45mm total length 110mm SKU: 63134500](https://maedler.in/product/ball-joint-rw-bore-22h7-material-steelouter-diameter-45mm-total-length-110mm-sku-63134500/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 20H7 material steel outer diameter 40mm total length 100mm SKU: 63134000](https://maedler.in/product/ball-joint-rw-bore-20h7-material-steelouter-diameter-40mm-total-length-100mm-sku-63134000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 18H7 material steel outer diameter 36mm total length 90mm SKU: 63133600](https://maedler.in/product/ball-joint-rw-bore-18h7-material-steelouter-diameter-36mm-total-length-90mm-sku-63133600/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 16H7 with keyway DIN 6885-1 on both sides outer diameter 32 mm steel SKU: 63133200N](https://maedler.in/product/ball-joint-rw-bore-16h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-32-mm-steel-sku-63133200n/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 16H7 material steel outer diameter 32mm total length 80mm SKU: 63133200](https://maedler.in/product/ball-joint-rw-bore-16h7-material-steelouter-diameter-32mm-total-length-80mm-sku-63133200/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 14H7 material steel outer diameter 28mm total length 70mm SKU: 63132800](https://maedler.in/product/ball-joint-rw-bore-14h7-material-steelouter-diameter-28mm-total-length-70mm-sku-63132800/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 12H7 with keyway DIN 6885-1 on both sides outer diameter 24mm steel SKU: 63132400N](https://maedler.in/product/ball-joint-rw-bore-12h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-24mm-steel-sku-63132400n/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 12H7 material steel outer diameter 24mm total length 60mm SKU: 63132400](https://maedler.in/product/ball-joint-rw-bore-12h7-material-steelouter-diameter-24mm-total-length-60mm-sku-63132400/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 10H7 with keyway DIN 6885-1 on both sides outer diameter 20mm steel SKU: 63132000N](https://maedler.in/product/ball-joint-rw-bore-10h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-20mm-steel-sku-63132000n/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 10H7 material steel outer diameter 20mm total length 50mm SKU: 63132000](https://maedler.in/product/ball-joint-rw-bore-10h7-material-steelouter-diameter-20mm-total-length-50mm-sku-63132000/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 8H7 material steel outer diameter 16mm total length 40mm SKU: 63131600](https://maedler.in/product/ball-joint-rw-bore-8h7-material-steelouter-diameter-16mm-total-length-40mm-sku-63131600/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Ball joint RW bore 6H7 material steel outer diameter 13mm total length 35mm SKU: 63131300](https://maedler.in/product/ball-joint-rw-bore-6h7-material-steelouter-diameter-13mm-total-length-35mm-sku-63131300/): Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. - [Precision single universal joint WE DIN808 bore 40H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63128000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-40h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63128000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 40H material steel total length 160mm outer diameter 80mm SKU: 63128000](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-40h-material-steel-total-length-160mm-outer-diameter-80mm-sku-63128000/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 35H7 material steel total length 140mm outer diameter 70mm SKU: 63127000](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-35h7-material-steel-total-length-140mm-outer-diameter-70mm-sku-63127000/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63125800N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63125800n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 30H7 material steel total length 122mm outer diameter 58mm SKU: 63125800](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-30h7-material-steel-total-length-122mm-outer-diameter-58mm-sku-63125800/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision cardan joint WE DIN808 single, bore 25H7 material steel total length 105mm outer diameter 52mm SKU: 63125200](https://maedler.in/product/precision-cardan-joint-we-din808-single-bore-25h7-material-steel-total-length-105mm-outer-diameter-52mm-sku-63125200/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 25H7 material steel total length 108mm outer diameter 50mm SKU: 63125000](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-25h7-material-steel-total-length-108mm-outer-diameter-50mm-sku-63125000/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63124700N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63124700n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 22H7 material steel total length 95mm outer diameter 47mm SKU: 63124700](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-22h7-material-steel-total-length-95mm-outer-diameter-47mm-sku-63124700/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision cardan joint WE DIN808 single, bore 20H7 material steel total length 82mm outer diameter 42mm SKU: 63124200](https://maedler.in/product/precision-cardan-joint-we-din808-single-bore-20h7-material-steel-total-length-82mm-outer-diameter-42mm-sku-63124200/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 20H7 material steel total length 82mm outer diameter 40mm SKU: 63124000](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-20h7-material-steel-total-length-82mm-outer-diameter-40mm-sku-63124000/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 74mm steel SKU: 63123800N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-74mm-steel-sku-63123800n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision cardan joint WE DIN808 single, bore 18H7 material steel total length 74mm outer diameter 37mm SKU: 63123800](https://maedler.in/product/precision-cardan-joint-we-din808-single-bore-18h7-material-steel-total-length-74mm-outer-diameter-37mm-sku-63123800/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 18H7 material steel total length 72mm outer diameter 37mm SKU: 63123700](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-18h7-material-steel-total-length-72mm-outer-diameter-37mm-sku-63123700/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision cardan joint WE DIN808 single, bore 16H7 material steel total length 68mm outer diameter 32mm SKU: 63123300](https://maedler.in/product/precision-cardan-joint-we-din808-single-bore-16h7-material-steel-total-length-68mm-outer-diameter-32mm-sku-63123300/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63123200N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63123200n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 16H7 material steel total length 65mm outer diameter 32mm SKU: 63123200](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-16h7-material-steel-total-length-65mm-outer-diameter-32mm-sku-63123200/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision cardan joint WE DIN808 single, bore 14H7 material steel total length 60mm outer diameter 29mm SKU: 63123000](https://maedler.in/product/precision-cardan-joint-we-din808-single-bore-14h7-material-steel-total-length-60mm-outer-diameter-29mm-sku-63123000/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63122900N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63122900n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 14H7 material steel total length 56mm outer diameter 29mm SKU: 63122900](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-14h7-material-steel-total-length-56mm-outer-diameter-29mm-sku-63122900/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 56mm steel SKU: 63122700N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-56mm-steel-sku-63122700n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision cardan joint WE DIN808 single, bore 12H7 material steel total length 56mm outer diameter 26mm SKU: 63122700](https://maedler.in/product/precision-cardan-joint-we-din808-single-bore-12h7-material-steel-total-length-56mm-outer-diameter-26mm-sku-63122700/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63122600N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63122600n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 12H7 material steel total length 50mm outer diameter 25mm SKU: 63122600](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-12h7-material-steel-total-length-50mm-outer-diameter-25mm-sku-63122600/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 48mm steel SKU: 63122200N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-48mm-steel-sku-63122200n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision cardan joint WE DIN808 single, bore 10H7 material steel total length 48mm outer diameter 22mm SKU: 63122200](https://maedler.in/product/precision-cardan-joint-we-din808-single-bore-10h7-material-steel-total-length-48mm-outer-diameter-22mm-sku-63122200/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 10H7 material steel SKU: 63122000](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-10h7-material-steel-sku-63122000/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 40mm steel SKU: 63121800N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-40mm-steel-sku-63121800n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision cardan joint WE DIN808 single, bore 8H7 total length 40mm material steel total length 40mm outer diameter 18mm SKU: 63121800](https://maedler.in/product/precision-cardan-joint-we-din808-single-bore-8h7-total-length-40mm-material-steel-total-length-40mm-outer-diameter-18mm-sku-63121800/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63121600N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63121600n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 8H7 material steel total length 40mm outer diameter 16mm SKU: 63121600](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-8h7-material-steel-total-length-40mm-outer-diameter-16mm-sku-63121600/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 simple bore 6H7 material steel total length 34mm outer diameter 16mm SKU: 63121500](https://maedler.in/product/precision-single-universal-joint-we-din808-simple-bore-6h7-material-steel-total-length-34mm-outer-diameter-16mm-sku-63121500/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 40H7 material steel total length 180mm outer diameter 80mm SKU: 63118000](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-40h7-material-steel-total-length-180mm-outer-diameter-80mm-sku-63118000/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63117000N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-35h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63117000n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 35H7 material steel total length 140mm outer diameter 70mm SKU: 63117000](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-35h7-material-steel-total-length-140mm-outer-diameter-70mm-sku-63117000/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63116300N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63116300n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 30H7 material steel total length 166mm outer diameter 63mm SKU: 63116300](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-30h7-material-steel-total-length-166mm-outer-diameter-63mm-sku-63116300/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 25H7 material steel total length 132mm outer diameter 50mm SKU: 63115000](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-25h7-material-steel-total-length-132mm-outer-diameter-50mm-sku-63115000/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 20H7 material steel total length 108mm outer diameter 40mm SKU: 63114000](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-20h7-material-steel-total-length-108mm-outer-diameter-40mm-sku-63114000/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63113700N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63113700n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 18H7 material steel total length 72mm outer diameter 37mm SKU: 63113700](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-18h7-material-steel-total-length-72mm-outer-diameter-37mm-sku-63113700/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63113200N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63113200n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 16H7 material steel total length 86mm outer diameter 32mm SKU: 63113200](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-16h7-material-steel-total-length-86mm-outer-diameter-32mm-sku-63113200/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 14H7 material steel total length 74mm outer diameter 25mm SKU: 63112600](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-14h7-material-steel-total-length-74mm-outer-diameter-25mm-sku-63112600/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63112200N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63112200n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 10H7 material steel total length 62mm outer diameter 20mm SKU: 63112200](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-10h7-material-steel-total-length-62mm-outer-diameter-20mm-sku-63112200/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63111600N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63111600n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 simple bore 8H7 material steel total length 52mm outer diameter 16mm SKU: 63111600](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-simple-bore-8h7-material-steel-total-length-52mm-outer-diameter-16mm-sku-63111600/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm shielded on both sides SKU: 6310-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-110mm-width-27mm-shielded-on-both-sides-sku-6310-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm shielded on both sides clearance C3 SKU: 6310-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-110mm-width-27mm-shielded-on-both-sides-clearance-c3-sku-6310-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm sealed on both sides SKU: 6310-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-110mm-width-27mm-sealed-on-both-sides-sku-6310-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm sealed on both sides clearance C3 SKU: 6310-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-110mm-width-27mm-sealed-on-both-sides-clearance-c3-sku-6310-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm sealed on both sides SKU: 6310-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-110mm-width-27mm-sealed-on-both-sides-sku-6310-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm shielded on both sides SKU: 6310-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-110mm-width-27mm-shielded-on-both-sides-sku-6310-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm open (unsealed) SKU: 6310-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-110mm-width-27mm-open-unsealed-sku-6310-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 110mm width 27mm open (unsealed) clearance C3 SKU: 6310-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-110mm-width-27mm-open-unsealed-clearance-c3-sku-6310-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 100mm width 25mm shielded on both sides SKU: 6309-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-100mm-width-25mm-shielded-on-both-sides-sku-6309-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 100mm width 25mm shielded on both sides clearance C3 SKU: 6309-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-100mm-width-25mm-shielded-on-both-sides-clearance-c3-sku-6309-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 100mm width 25mm sealed on both sides SKU: 6309-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-100mm-width-25mm-sealed-on-both-sides-sku-6309-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 100mm width 25mm sealed on both sides clearance C3 SKU: 6309-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-100mm-width-25mm-sealed-on-both-sides-clearance-c3-sku-6309-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 100mm width 25mm sealed on both sides SKU: 6309-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-100mm-width-25mm-sealed-on-both-sides-sku-6309-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 100mm width 25mm shielded on both sides SKU: 6309-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-100mm-width-25mm-shielded-on-both-sides-sku-6309-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 100mm width 25mm open (unsealed) SKU: 6309-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-100mm-width-25mm-open-unsealed-sku-6309-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 100mm width 25mm open (unsealed) clearance C3 SKU: 6309-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-100mm-width-25mm-open-unsealed-clearance-c3-sku-6309-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Telescopic universal-joint shaft UW made from plastic/brass bore 20mm telescoped length 564mm max. travel 304mm SKU: 63083600](https://maedler.in/product/telescopic-universal-joint-shaft-uw-made-from-plastic-brass-bore-20mm-telescoped-length-564mm-max-travel-304mm-sku-63083600/): Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C. To shorten the teleshafts, please always cut off the same length on either side. * The stated peak torque refers to Lmin. (telescope retracted). The max. torque for extended telescope has to be determined empirically and subject to the respective application. ** Bore-reducing bushes see below. 1) Joint faces fitted with brass inserts with 2 set screws per hub. 2) Joints only fitted with metal inserts, without set screws. - [Telescopic universal-joint shaft UW made from plastic/brass bore 12.70mm telescoped length 500mm max. travel 284mm SKU: 63082800](https://maedler.in/product/telescopic-universal-joint-shaft-uw-made-from-plastic-brass-bore-12-70mm-telescoped-length-500mm-max-travel-284mm-sku-63082800/): Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C. To shorten the teleshafts, please always cut off the same length on either side. * The stated peak torque refers to Lmin. (telescope retracted). The max. torque for extended telescope has to be determined empirically and subject to the respective application. ** Bore-reducing bushes see below. 1) Joint faces fitted with brass inserts with 2 set screws per hub. 2) Joints only fitted with metal inserts, without set screws. - [Telescopic universal-joint shaft UW made from plastic/brass bore 10mm telescoped length 464mm max. travel 281mm SKU: 63082300](https://maedler.in/product/telescopic-universal-joint-shaft-uw-made-from-plastic-brass-bore-10mm-telescoped-length-464mm-max-travel-281mm-sku-63082300/): Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C. To shorten the teleshafts, please always cut off the same length on either side. * The stated peak torque refers to Lmin. (telescope retracted). The max. torque for extended telescope has to be determined empirically and subject to the respective application. ** Bore-reducing bushes see below. 1) Joint faces fitted with brass inserts with 2 set screws per hub. 2) Joints only fitted with metal inserts, without set screws. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 90mm width 23mm shielded on both sides SKU: 6308-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-90mm-width-23mm-shielded-on-both-sides-sku-6308-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 90mm width 23mm shielded on both sides clearance C3 SKU: 6308-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-90mm-width-23mm-shielded-on-both-sides-clearance-c3-sku-6308-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 90mm width 23mm sealed on both sides SKU: 6308-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-90mm-width-23mm-sealed-on-both-sides-sku-6308-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 90mm width 23mm sealed on both sides clearance C3 SKU: 6308-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-90mm-width-23mm-sealed-on-both-sides-clearance-c3-sku-6308-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 90mm width 23mm sealed on both sides SKU: 6308-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-90mm-width-23mm-sealed-on-both-sides-sku-6308-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Telescopic universal-joint shaft UW made from plastic/brass bore 10mm telescoped length 450mm max. travel 280mm SKU: 63081700](https://maedler.in/product/telescopic-universal-joint-shaft-uw-made-from-plastic-brass-bore-10mm-telescoped-length-450mm-max-travel-280mm-sku-63081700/): Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C. To shorten the teleshafts, please always cut off the same length on either side. * The stated peak torque refers to Lmin. (telescope retracted). The max. torque for extended telescope has to be determined empirically and subject to the respective application. ** Bore-reducing bushes see below. 1) Joint faces fitted with brass inserts with 2 set screws per hub. 2) Joints only fitted with metal inserts, without set screws. - [Telescopic universal-joint shaft UW made from plastic/brass bore 5mm telescoped length 300mm max. travel 184mm SKU: 63081400](https://maedler.in/product/telescopic-universal-joint-shaft-uw-made-from-plastic-brass-bore-5mm-telescoped-length-300mm-max-travel-184mm-sku-63081400/): Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C. To shorten the teleshafts, please always cut off the same length on either side. * The stated peak torque refers to Lmin. (telescope retracted). The max. torque for extended telescope has to be determined empirically and subject to the respective application. ** Bore-reducing bushes see below. 1) Joint faces fitted with brass inserts with 2 set screws per hub. 2) Joints only fitted with metal inserts, without set screws. - [Telescopic universal-joint shaft UW made from plastic/brass bore 5mm telescoped length 240mm max. travel 149mm SKU: 63081100](https://maedler.in/product/telescopic-universal-joint-shaft-uw-made-from-plastic-brass-bore-5mm-telescoped-length-240mm-max-travel-149mm-sku-63081100/): Material: acetal (black). Cross-pieces: brass. Joint faces are fitted with brass inserts, with 2 set screws per hub. Temperature range: -20°C to + 60°C. To shorten the teleshafts, please always cut off the same length on either side. * The stated peak torque refers to Lmin. (telescope retracted). The max. torque for extended telescope has to be determined empirically and subject to the respective application. ** Bore-reducing bushes see below. 1) Joint faces fitted with brass inserts with 2 set screws per hub. 2) Joints only fitted with metal inserts, without set screws. - [Tensioning element for front mounting size 4 1500 N SKU: 14080407](https://maedler.in/product/tensioning-element-for-front-mounting-size-4-1500-n-sku-14080407/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements are in general identical to the standard version. For easier mounting they are fixed from the lever side using an in-and-out screw. A thread has to be cut in the machine housing. The supplied screw is secured for transport with an O-Ring. Can be used for both tensioning directions. - [Tensioning element size 4 1500 N zinc plated and oil-resistent SKU: 14080403](https://maedler.in/product/tensioning-element-size-4-1500-n-zinc-plated-and-oil-resistent-sku-14080403/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [support bracket for tensioner size 4 bore A=20.5mm SKU: 14080402](https://maedler.in/product/support-bracket-for-tensioner-size-4-bore-a20-5mm-sku-14080402/): Material: Steel, blue painted.This support enabels an easy mounting of the tensioning element or idler wheel to the machine. The hole A is for fastening the tensioner with it´s central screw. The mounting can be done at the front side or back side of the support. For any other purposes, the both holes B can be used to fix other parts instead of a tensioner. - [support bracket for tensioner size 4 SKU: 14080401](https://maedler.in/product/support-bracket-for-tensioner-size-4-sku-14080401/): Material: Steel, blue painted.This support enabels an easy mounting of the tensioning element or idler wheel to the machine. The hole A is for fastening the tensioner with it´s central screw. The mounting can be done at the front side or back side of the support. For any other purposes, the both holes B can be used to fix other parts instead of a tensioner. - [Tensioning element size 4 1500 N SKU: 14080400](https://maedler.in/product/tensioning-element-size-4-1500-n-sku-14080400/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element Boomerang size 3 405 N SKU: 14080309](https://maedler.in/product/tensioning-element-boomerang-size-3-405-n-sku-14080309/): Material: Housing sintered steel, lever St52. These tensioning elements are used to compensate the slack in extremely long chain drives. The slack length passes in an S-shape through the supplied sprockets or pulleys so that the lever works as a compensator. This system thus offers a triple compensation of the slack compared to standard tensioners. - [Tensioning element for front mounting size 3 810 N SKU: 14080307](https://maedler.in/product/tensioning-element-for-front-mounting-size-3-810-n-sku-14080307/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements are in general identical to the standard version. For easier mounting they are fixed from the lever side using an in-and-out screw. A thread has to be cut in the machine housing. The supplied screw is secured for transport with an O-Ring. Can be used for both tensioning directions. - [Tensioning element size 3 810 N zinc plated and oil-resistent SKU: 14080303](https://maedler.in/product/tensioning-element-size-3-810-n-zinc-plated-and-oil-resistent-sku-14080303/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [Tensioning element size 3 810 N SKU: 14080300](https://maedler.in/product/tensioning-element-size-3-810-n-sku-14080300/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element size 2 350 N bore 16mm SKU: 14080216](https://maedler.in/product/tensioning-element-size-2-350-n-bore-16mm-sku-14080216/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element size 2 350 N bore 12mm SKU: 14080212](https://maedler.in/product/tensioning-element-size-2-350-n-bore-12mm-sku-14080212/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element Boomerang size 2 175 N SKU: 14080209](https://maedler.in/product/tensioning-element-boomerang-size-2-175-n-sku-14080209/): Material: Housing sintered steel, lever St52. These tensioning elements are used to compensate the slack in extremely long chain drives. The slack length passes in an S-shape through the supplied sprockets or pulleys so that the lever works as a compensator. This system thus offers a triple compensation of the slack compared to standard tensioners. - [Tensioning element for front mounting size 2 350 N SKU: 14080207](https://maedler.in/product/tensioning-element-for-front-mounting-size-2-350-n-sku-14080207/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements are in general identical to the standard version. For easier mounting they are fixed from the lever side using an in-and-out screw. A thread has to be cut in the machine housing. The supplied screw is secured for transport with an O-Ring. Can be used for both tensioning directions. - [Tensioning element size 2 350 N zinc plated and oil-resistent SKU: 14080203](https://maedler.in/product/tensioning-element-size-2-350-n-zinc-plated-and-oil-resistent-sku-14080203/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [Tensioning element size 2 350 N SKU: 14080200](https://maedler.in/product/tensioning-element-size-2-350-n-sku-14080200/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element for front mounting size 1 135 N SKU: 14080107](https://maedler.in/product/tensioning-element-for-front-mounting-size-1-135-n-sku-14080107/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements are in general identical to the standard version. For easier mounting they are fixed from the lever side using an in-and-out screw. A thread has to be cut in the machine housing. The supplied screw is secured for transport with an O-Ring. Can be used for both tensioning directions. - [Tensioning element size 1 135 N zinc plated and oil-resistent SKU: 14080103](https://maedler.in/product/tensioning-element-size-1-135-n-zinc-plated-and-oil-resistent-sku-14080103/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [Tensioning element size 1 135 N SKU: 14080100](https://maedler.in/product/tensioning-element-size-1-135-n-sku-14080100/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Tensioning element size 0 96 N zinc plated and oil-resistent SKU: 14080003](https://maedler.in/product/tensioning-element-size-0-96-n-zinc-plated-and-oil-resistent-sku-14080003/): Material: Casing made of sintered steel or grey cast iron GG20, lever made of St52.The design of these tensioning elements is identical to the standard version, but they are zinc-plated and the synthetic spring elements are resistant to mineral oils. These components are especially suited for 'outdoor' applications, e.g. for construction machinery or for use inside the oilbath of a gearbox. The tensioning elements are marked with a yellow dot on the lever. Can be used for both tensioning directions.Temperature range: -30°C to -90°C. - [Tensioning element size 0 96 N SKU: 14080000](https://maedler.in/product/tensioning-element-size-0-96-n-sku-14080000/): Material: Housing up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever made of St52. These tensioning elements can be used for tensioning all common kinds of chain and belt drives. The elastomeric inserts are based on highly-elastic natural rubber with a good shape memory and are designed for applications in temperatures from -40° to +80°C. The tensioning elements are painted blue and supplied with a zinc-plated screw and spring washer. Can be used for both tensioning directions. - [Loctite 7200 Adhesive- and sealant-Remover content 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073420](https://maedler.in/product/loctite-7200-adhesive-and-sealant-remover-content-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073420/): Specifications Aerosol, amber. Active agent: mixture of aliphatic glycol esters etc. Expanding agent: propane gas. Exposure time 10 to 15 min (with silicone 30 Min.). Foam forming, sticks well to vertical surfaces. Removes hardened seals and adhesives from most metal surfaces within 10 to 15 minutes. Resolves and removes mould, lubricants, soot, caked on oil, fat and paint. Can also be applied on wood. Application examples Preparation of metal parts prior to the application of seals sealants. No need to grind away or scrape off old sealings, i.e. no unnecessary damage to the surface finish. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H319 Causes serious eye irritation. - [Loctite 5920 Permanently elastic flange seal Ultra Copper content 300 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073415](https://maedler.in/product/loctite-5920-permanently-elastic-flange-seal-ultra-copper-content-300-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073415/): Specifications Sealing type: liquid (silicon, cupreous). Flange type: flexible. Curing process: air humidity. Temperature resistance: -60 to +315°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: excellent. One-component flange seal that cures at room temperature with excellent temperature resistance. Excellent resistance against motor and gearbox oil. Meets and exceeds manufacturer¿s specifications of GM and Ford. Short term temperature resistance to 350°C. Sealing gaps to 6 mm. Applications Sealing of oil pumps, thermostat housings, waterpumps, oil baths, gearbox covers etc. Ordering details: e.g.: Product No. 140 734 12, Loctite 5920, Cont. 40 ml Danger H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H350 May cause cancer. H371 May cause damage to organs. - [Loctite 5920 Permanently elastic flange seal Ultra Copper Tube 40 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073412](https://maedler.in/product/loctite-5920-permanently-elastic-flange-seal-ultra-copper-tube-40-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073412/): Specifications Sealing type: liquid (silicon, cupreous). Flange type: flexible. Curing process: air humidity. Temperature resistance: -60 to +315°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: excellent. One-component flange seal that cures at room temperature with excellent temperature resistance. Excellent resistance against motor and gearbox oil. Meets and exceeds manufacturer¿s specifications of GM and Ford. Short term temperature resistance to 350°C. Sealing gaps to 6 mm. Applications Sealing of oil pumps, thermostat housings, waterpumps, oil baths, gearbox covers etc. Ordering details: e.g.: Product No. 140 734 12, Loctite 5920, Cont. 40 ml Danger H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H350 May cause cancer. H371 May cause damage to organs. - [Loctite 5910 Permanently elastic adhesive/sealant content 300 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073408](https://maedler.in/product/loctite-5910-permanently-elastic-adhesive-sealant-content-300-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073408/): Specifications Sealing type: liquid (silicon, black). Flange type: flexible. Curing process: air humidity. Non sticky: 20 min Temperature resistance: + 200°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: medium. Permanently elastic flange sealant for non torsionally rigid flange seals. Low odour, little gas emission. Curing at room temperature. High resistance to vibration. Can also be used on plastic parts. Bondline gap to 6 mm. Applications Sealing of non torsionally rigid flanges which require high oil and vibration resistance, e.g. aluminium oil baths and controller housing covers. Ordering details: e.g.: Product No. 140 734 07, Loctite 5910, Cont. 50 ml Danger H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H350 May cause cancer. H371 May cause damage to organs. - [Loctite 5910 Permanently elastic adhesive/sealant content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073407](https://maedler.in/product/loctite-5910-permanently-elastic-adhesive-sealant-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073407/): Specifications Sealing type: liquid (silicon, black). Flange type: flexible. Curing process: air humidity. Non sticky: 20 min Temperature resistance: + 200°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: medium. Permanently elastic flange sealant for non torsionally rigid flange seals. Low odour, little gas emission. Curing at room temperature. High resistance to vibration. Can also be used on plastic parts. Bondline gap to 6 mm. Applications Sealing of non torsionally rigid flanges which require high oil and vibration resistance, e.g. aluminium oil baths and controller housing covers. Ordering details: e.g.: Product No. 140 734 07, Loctite 5910, Cont. 50 ml Danger H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H350 May cause cancer. H371 May cause damage to organs. - [Loctite 518 Medium strength standard flange sealant content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073402](https://maedler.in/product/loctite-518-medium-strength-standard-flange-sealant-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073402/): Specifications Sealing type: Liquid (acrylic, red). Flange type: torsionally rigid. Curing type: anaerobic. Temperature resistance: -55 to +150°C. Instant sealing effect: excellent. Oil resistance: excellent. Water/glycol resistance: excellent. One-component, medium strength flange sealant. The curing takes place on metal contact as anaerobic process. Fast curing at room temperature. Not recommended for plastic parts. Seals instantly at low pressure. Bondline gap to 0.5 mm. Applications Sealing of dimensionally stable flange connections as, e.g., engine and gearbox cover, water-pump flanges and controller housing covers. Ordering details: e.g.: Product No. 140 734 02, Loctite 518, Cont. 50 ml Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H410 Very toxic to aquatic life with long lasting effects. - [Loctite 4850 Flexible instant adhesive content 20 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073326](https://maedler.in/product/loctite-4850-flexible-instant-adhesive-content-20-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073326/): Specifications Temperature range: to 70°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity mPa.s: 400. Especially suited for: flexible materials. Approvals P1 NSF Reg. No.: 123011. Flexible instant adhesive with medium viscosity. Rapid setting, transparent. Especially suited for the assembly and repair of flexible materials and components. Application examples Bonding of materials for the production and repair of flexible seals and sleeves or the mounting of elastic components. Ordering details: e.g.: Product No. 140 733 24, Loctite 4850, Cont. 5 g Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 4850 Flexible instant adhesive content 5 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073324](https://maedler.in/product/loctite-4850-flexible-instant-adhesive-content-5-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073324/): Specifications Temperature range: to 70°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity mPa.s: 400. Especially suited for: flexible materials. Approvals P1 NSF Reg. No.: 123011. Flexible instant adhesive with medium viscosity. Rapid setting, transparent. Especially suited for the assembly and repair of flexible materials and components. Application examples Bonding of materials for the production and repair of flexible seals and sleeves or the mounting of elastic components. Ordering details: e.g.: Product No. 140 733 24, Loctite 4850, Cont. 5 g Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 454 Universal instant adhesive non-drip gel content 20 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073318](https://maedler.in/product/loctite-454-universal-instant-adhesive-non-drip-gel-content-20-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073318/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity: gel. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123009. Universal, instant adhesive gel can be used for bonding metals, composite materials, wood, cork, foam plastic, leather, cardboard, paper and ceramics. Good gap filling capability. Recommended for use on vertical surfaces or when working overhead. Can also be used with automated processing systems. Application examples Bonding rubber door stops onto walls. Bonding plastic signs onto wooden doors. Bonding rubber treads onto the steps of an aluminium ladder. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 454 Universal instant adhesive non-drip gel content 10 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073317](https://maedler.in/product/loctite-454-universal-instant-adhesive-non-drip-gel-content-10-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073317/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity: gel. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123009. Universal, instant adhesive gel can be used for bonding metals, composite materials, wood, cork, foam plastic, leather, cardboard, paper and ceramics. Good gap filling capability. Recommended for use on vertical surfaces or when working overhead. Can also be used with automated processing systems. Application examples Bonding rubber door stops onto walls. Bonding plastic signs onto wooden doors. Bonding rubber treads onto the steps of an aluminium ladder. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 454 Universal instant adhesive non-drip gel content 3 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073316](https://maedler.in/product/loctite-454-universal-instant-adhesive-non-drip-gel-content-3-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073316/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity: gel. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123009. Universal, instant adhesive gel can be used for bonding metals, composite materials, wood, cork, foam plastic, leather, cardboard, paper and ceramics. Good gap filling capability. Recommended for use on vertical surfaces or when working overhead. Can also be used with automated processing systems. Application examples Bonding rubber door stops onto walls. Bonding plastic signs onto wooden doors. Bonding rubber treads onto the steps of an aluminium ladder. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 406 instant adhesive for plastic and rubber content 20 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073309](https://maedler.in/product/loctite-406-instant-adhesive-for-plastic-and-rubber-content-20-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073309/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 10-20 sec. Viscosity mPa.s: 20. Especially suited for: plastics. Special instant adhesive for fast bonding of rubbers (incl. EPDM), plastics and elastomers. In combination with the primer Loctite 7239 even hard to bond plastics can be bonded. Application examples Bonding a silicon rubber piece onto a plastic housing in a car locking unit. Bonding a plastic part onto a fire extinguisher. Producing O-rings with the Loctite O-ring set. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 401 Universal instant adhesive content 20 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073305](https://maedler.in/product/loctite-401-universal-instant-adhesive-content-20-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073305/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity mPa.s: 110. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123011. Universal instant adhesive. Bonds almost all materials as, e.g., plastics, elastomers, metals, paper, cardboard, wood. Application examples Bonding a PVC seal onto an ABS housing when manufacturing car mirrors. Bonding foam rubber onto a steel or plastic housing. Bonding PVC foils onto paper when producing packaging materials. Bonding small plastic parts onto wood, e.g., in the furniture industry. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 401 Universal instant adhesive content 5 g (Actual safety data sheet on the internet in the section Downloads) SKU: 14073304](https://maedler.in/product/loctite-401-universal-instant-adhesive-content-5-g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073304/): Specifications Temperature range: to 80°C. Handling strength (steel at 22°C and 50% air humidity): after 5-20 sec. Viscosity mPa.s: 110. Especially suited for: porous materials. Approvals P1 NSF Reg. No.: 123011. Universal instant adhesive. Bonds almost all materials as, e.g., plastics, elastomers, metals, paper, cardboard, wood. Application examples Bonding a PVC seal onto an ABS housing when manufacturing car mirrors. Bonding foam rubber onto a steel or plastic housing. Bonding PVC foils onto paper when producing packaging materials. Bonding small plastic parts onto wood, e.g., in the furniture industry. Attention H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 648 Retaining compound with high temperature resistance content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073214](https://maedler.in/product/loctite-648-retaining-compound-with-high-temperature-resistance-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073214/): Specifications Strength: High. Handling strength (at room temperature on steel): after 5 min. Functional strength (Typical value at 22°C): min. 6 hrs. Bondline gap: To 0.15 mm. Temperature resistance: +175°C. Universal bonding product for metal, temperature resistant to +175°C. Capable of filling gaps up to 0.15 mm.Handling strength after only 5 minutes.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts, in applications where high operating temperatures prevail. Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 648 Retaining compound with high temperature resistance content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073213](https://maedler.in/product/loctite-648-retaining-compound-with-high-temperature-resistance-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073213/): Specifications Strength: High. Handling strength (at room temperature on steel): after 5 min. Functional strength (Typical value at 22°C): min. 6 hrs. Bondline gap: To 0.15 mm. Temperature resistance: +175°C. Universal bonding product for metal, temperature resistant to +175°C. Capable of filling gaps up to 0.15 mm.Handling strength after only 5 minutes.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts, in applications where high operating temperatures prevail. Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 638 Retaining compound for large gaps content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073208](https://maedler.in/product/loctite-638-retaining-compound-for-large-gaps-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073208/): Specifications Strength: High. Handling strength (at room temperature on steel): after 5 min. Functional strength (Typical value at 22°C): min. 6 hrs. Bondline gap: To 0.25 mm. Temperature resistance: +150°C. Approvals KTW recommendation. DVGW approval. P1 NSF Reg. No.: 123010. Special bonding product for metal highly capable of filling gaps and fast reached handling strength.For gaps up to 0.25 mm.Temperature resistant to + 150°C.Handling strength after only 5 minutes.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts with bondline gap to 0.25 mm. Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 638 Retaining compound for large gaps content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073207](https://maedler.in/product/loctite-638-retaining-compound-for-large-gaps-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073207/): Specifications Strength: High. Handling strength (at room temperature on steel): after 5 min. Functional strength (Typical value at 22°C): min. 6 hrs. Bondline gap: To 0.25 mm. Temperature resistance: +150°C. Approvals KTW recommendation. DVGW approval. P1 NSF Reg. No.: 123010. Special bonding product for metal highly capable of filling gaps and fast reached handling strength.For gaps up to 0.25 mm.Temperature resistant to + 150°C.Handling strength after only 5 minutes.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts with bondline gap to 0.25 mm. Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 603 Retaining compound oil-Tolerant content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073203](https://maedler.in/product/loctite-603-retaining-compound-oil-tolerant-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073203/): Specifications Strength: High. Handling strength (at room temperature on steel): after 10 min. Functional strength (Typical value at 22°C): min. 12 hrs. Bondline gap: to 0.1 mm. Temperature resistance: +150°C. Approvals P1 NSF Reg. No.: 123003. Tested and recommended by leading roller bearing manufacturers. Oil-tolerant, universal bonding product for metal.Tolerates oil-based contaminations. Especially suited for the mounting of bearings (bondline gap to 0.1 mm). Rapid setting with high strength.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts with small bondline gap (to 0.1 mm). Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 603 Retaining compound oil-Tolerant content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073202](https://maedler.in/product/loctite-603-retaining-compound-oil-tolerant-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073202/): Specifications Strength: High. Handling strength (at room temperature on steel): after 10 min. Functional strength (Typical value at 22°C): min. 12 hrs. Bondline gap: to 0.1 mm. Temperature resistance: +150°C. Approvals P1 NSF Reg. No.: 123003. Tested and recommended by leading roller bearing manufacturers. Oil-tolerant, universal bonding product for metal.Tolerates oil-based contaminations. Especially suited for the mounting of bearings (bondline gap to 0.1 mm). Rapid setting with high strength.When disassembling the parts, the connection should be heated to 250°C.ApplicationsBonding of bushes, bearings etc. in housings and on shafts with small bondline gap (to 0.1 mm). Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 2701 Maximum strength thread locking content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073119](https://maedler.in/product/loctite-2701-maximum-strength-thread-locking-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073119/): Specifications Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 6 hrs. Breakaway torque tested according to ISO 10964: 38 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals P1 NSF Reg. No.: 123006. Maximum strength thread locking for all threaded connections made from metal, including passive materials, such as high-alloyed steel. Ideal for threaded connections exposed to strong vibrations and shocks, e.g. studs on motors or pumps etc.When disassembling the parts, the connection should be heated to 250°C.ApplicationsAll threaded connections which require high durability against strong vibrations and shocks or extreme environmental or chemical influences. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 2701 Maximum strength thread locking content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073118](https://maedler.in/product/loctite-2701-maximum-strength-thread-locking-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073118/): Specifications Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 6 hrs. Breakaway torque tested according to ISO 10964: 38 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals P1 NSF Reg. No.: 123006. Maximum strength thread locking for all threaded connections made from metal, including passive materials, such as high-alloyed steel. Ideal for threaded connections exposed to strong vibrations and shocks, e.g. studs on motors or pumps etc.When disassembling the parts, the connection should be heated to 250°C.ApplicationsAll threaded connections which require high durability against strong vibrations and shocks or extreme environmental or chemical influences. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 290 Post-assembly thread locking medium strength content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073113](https://maedler.in/product/loctite-290-post-assembly-thread-locking-medium-strength-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073113/): Specifications Thread size: to M12. Strength: Medium. Functional strength (Typical value at 22°C): 3 hrs. Breakaway torque tested according to ISO 10964: 10 Nm. Long-term temperature resistance: -55°C to +150°C. For post-assembly thread locking (medium strength). For metal threads. Because of its low viscosity, the product penetrates into the threads, to size M12. When disassembling the parts, the connection should be heated to 250°C.ApplicationsPrefabricated connections, carburetor screws, adjusting screws, screws at maintenance access etc. Attention H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 290 Post-assembly thread locking medium strength content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073112](https://maedler.in/product/loctite-290-post-assembly-thread-locking-medium-strength-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073112/): Specifications Thread size: to M12. Strength: Medium. Functional strength (Typical value at 22°C): 3 hrs. Breakaway torque tested according to ISO 10964: 10 Nm. Long-term temperature resistance: -55°C to +150°C. For post-assembly thread locking (medium strength). For metal threads. Because of its low viscosity, the product penetrates into the threads, to size M12. When disassembling the parts, the connection should be heated to 250°C.ApplicationsPrefabricated connections, carburetor screws, adjusting screws, screws at maintenance access etc. Attention H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 270, High Strength Thread Locking, Content 50 ml ================================================= Actual safety data sheet from 21.02.2020 on the internet in the section Downloads ================================================= SKU: 14073110](https://maedler.in/product/loctite-270-high-strength-thread-locking-content-50-ml-actual-safety-data-sheet-from-21-02-2020-on-the-internet-in-the-section-downloads/): Specifications Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 3 hours. Breakaway torque tested according to ISO 10964: 33 Nm. Long-term temperature resistance: -55°C to +180°C. Approvals P1 NSF Reg. No.: 123006. High-strength threadlocker for maximum efficacy in securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C. All threaded connections which require high durability against strong vibrations and shocks or extreme environmental or chemical influences. Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H411 Toxic to aquatic life with long lasting effects. - [Loctite 270, High Strength Thread Locking, Content 10 ml ================================================= Actual safety data sheet from 21.02.2020 on the internet in the section Downloads ================================================= SKU: 14073109](https://maedler.in/product/loctite-270-high-strength-thread-locking-content-10-ml-actual-safety-data-sheet-from-21-02-2020-on-the-internet-in-the-section-downloads/): Specifications Thread size: To M20. Strength: High. Functional strength (Typical value at 22°C): 3 hours. Breakaway torque tested according to ISO 10964: 33 Nm. Long-term temperature resistance: -55°C to +180°C. Approvals P1 NSF Reg. No.: 123006. High-strength threadlocker for maximum efficacy in securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C. All threaded connections which require high durability against strong vibrations and shocks or extreme environmental or chemical influences. Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H411 Toxic to aquatic life with long lasting effects. - [Loctite 243 Medium strength thread locking content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073108](https://maedler.in/product/loctite-243-medium-strength-thread-locking-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073108/): Specifications Thread size: to M36. Strength: Medium. Functional strength (Typical value at 22°C): 2 hrs. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +180°C. Approvals P1 NSF Reg. No.: 123000. Certified to ANSI/NSF. Standard 61. Medium strength thread locking for all threaded connections made from metal to M36.Tolerates low oil-based contaminations. The connections can be unfastened using normal tools. ApplicationsLocks and prevents loosening from vibration on parts such as screws, nuts and studs, e.g., on motors, gearboxes and housings. Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 243 Medium strength thread locking content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073107](https://maedler.in/product/loctite-243-medium-strength-thread-locking-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073107/): Specifications Thread size: to M36. Strength: Medium. Functional strength (Typical value at 22°C): 2 hrs. Breakaway torque tested according to ISO 10964: 20 Nm. Long-term temperature resistance: -55°C to +180°C. Approvals P1 NSF Reg. No.: 123000. Certified to ANSI/NSF. Standard 61. Medium strength thread locking for all threaded connections made from metal to M36.Tolerates low oil-based contaminations. The connections can be unfastened using normal tools. ApplicationsLocks and prevents loosening from vibration on parts such as screws, nuts and studs, e.g., on motors, gearboxes and housings. Attention H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. - [Loctite 222 Low-strength thread locking content 50 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073102](https://maedler.in/product/loctite-222-low-strength-thread-locking-content-50-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073102/): Specifications Thread size: to M36. Strength: Low. Functional strength (Typical value at 22°C): 6 hrs. Breakaway torque tested according to ISO 10964: 6 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals P1 NSF Reg. No.: 123002. Low-strength thread locking for all threaded connections made from metal to M36. The connections can be unfastened using normal tools. Applications Ideal for adjusting screws, screws at maintenance access, carburetor screws etc.. Also suitable for metals which might brake during disassembly. Attention H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Loctite 222 Low-strength thread locking content 10 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14073101](https://maedler.in/product/loctite-222-low-strength-thread-locking-content-10-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14073101/): Specifications Thread size: to M36. Strength: Low. Functional strength (Typical value at 22°C): 6 hrs. Breakaway torque tested according to ISO 10964: 6 Nm. Long-term temperature resistance: -55°C to +150°C. Approvals P1 NSF Reg. No.: 123002. Low-strength thread locking for all threaded connections made from metal to M36. The connections can be unfastened using normal tools. Applications Ideal for adjusting screws, screws at maintenance access, carburetor screws etc.. Also suitable for metals which might brake during disassembly. Attention H319 Causes serious eye irritation. H335 May cause respiratory irritation. - [Sprocket set for chain tensioners, triple 12 B-3 3/4" x 7/16" Z=15 SKU: 14053701](https://maedler.in/product/sprocket-set-for-chain-tensioners-triple-12-b-3-3-4-x-7-16-z15-sku-14053701/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temerature range: -20° to +120°C. - [chain-stretcher for triplex roller chain 3/4X7/16" , set of 14053701 + 14080400 SKU: 14053700](https://maedler.in/product/chain-stretcher-for-triplex-roller-chain-3-4x7-16-set-of-14053701-14080400-sku-14053700/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, triple 10 B-3 5/8" x 3/8" Z=15 SKU: 14053601](https://maedler.in/product/sprocket-set-for-chain-tensioners-triple-10-b-3-5-8-x-3-8-z15-sku-14053601/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temerature range: -20° to +120°C. - [chain-stretcher for triplex roller chain 5/8X3/8" , set of 14053601 + 14080300 SKU: 14053600](https://maedler.in/product/chain-stretcher-for-triplex-roller-chain-5-8x3-8-set-of-14053601-14080300-sku-14053600/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, triple 08 B-3 1/2" x 5/16" Z=15 SKU: 14053501](https://maedler.in/product/sprocket-set-for-chain-tensioners-triple-08-b-3-1-2-x-5-16-z15-sku-14053501/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temerature range: -20° to +120°C. - [chain-stretcher for triplex roller chain 1/2X5/16" , set of 14053501 + 14080200 SKU: 14053500](https://maedler.in/product/chain-stretcher-for-triplex-roller-chain-1-2x5-16-set-of-14053501-14080200-sku-14053500/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, triple 06 B-3 3/8" x 7/32" Z=15 SKU: 14053101](https://maedler.in/product/sprocket-set-for-chain-tensioners-triple-06-b-3-3-8-x-7-32-z15-sku-14053101/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temerature range: -20° to +120°C. - [chain-stretcher for triplex roller chain 3/8X7/32" , set of 14053101 + 14080200 SKU: 14053100](https://maedler.in/product/chain-stretcher-for-triplex-roller-chain-3-8x7-32-set-of-14053101-14080200-sku-14053100/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 16 B-2 1" x 17,02mm Z=13 SKU: 14052801](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-16-b-2-1-x-1702mm-z13-sku-14052801/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 1"x17,02mm , set of 14052801 + 14080400 SKU: 14052800](https://maedler.in/product/chain-stretcher-for-double-roller-chain-1x1702mm-set-of-14052801-14080400-sku-14052800/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 12 B-2 3/4" x 7/16" Z=15 SKU: 14052701](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-12-b-2-3-4-x-7-16-z15-sku-14052701/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 3/4X7/16" , set of 14052701 + 14080300 SKU: 14052700](https://maedler.in/product/chain-stretcher-for-double-roller-chain-3-4x7-16-set-of-14052701-14080300-sku-14052700/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 10 B-2 5/8" x 3/8" Z=15 SKU: 14052601](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-10-b-2-5-8-x-3-8-z15-sku-14052601/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 5/8X3/8" , set of 14052601 + 14080300 SKU: 14052600](https://maedler.in/product/chain-stretcher-for-double-roller-chain-5-8x3-8-set-of-14052601-14080300-sku-14052600/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 08 B-2 1/2" x 5/16" Z=15 SKU: 14052501](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-08-b-2-1-2-x-5-16-z15-sku-14052501/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 1/2X5/16" , set of 14052501 + 14080200 SKU: 14052500](https://maedler.in/product/chain-stretcher-for-double-roller-chain-1-2x5-16-set-of-14052501-14080200-sku-14052500/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners, double 06 B-2 3/8" x 7/32" Z=15 SKU: 14052101](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-06-b-2-3-8-x-7-32-z15-sku-14052101/): Material: Sprockets from steel St40/St50. Bearings from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20° to +120°C. - [chain-stretcher for double roller chain 3/8X7/32" , set of 14052101 + 14080200 SKU: 14052100](https://maedler.in/product/chain-stretcher-for-double-roller-chain-3-8x7-32-set-of-14052101-14080200-sku-14052100/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 16 B-1 1" x 17,02mm Z=13 SKU: 14050801](https://maedler.in/product/sprocket-set-for-chain-tensioners-16-b-1-1-x-1702mm-z13-sku-14050801/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 1"x17,02mm , set of 14050801 + 14080400 SKU: 14050800](https://maedler.in/product/chain-stretcher-for-roller-chain-1x1702mm-set-of-14050801-14080400-sku-14050800/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 12 B-1 3/4" x 7/16" Z=15 SKU: 14050701](https://maedler.in/product/sprocket-set-for-chain-tensioners-12-b-1-3-4-x-7-16-z15-sku-14050701/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 3/4X7/16" , set of 14050701 + 14080300 SKU: 14050700](https://maedler.in/product/chain-stretcher-for-roller-chain-3-4x7-16-set-of-14050701-14080300-sku-14050700/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 10 B-1 5/8" x 3/8" Z=15 SKU: 14050601](https://maedler.in/product/sprocket-set-for-chain-tensioners-10-b-1-5-8-x-3-8-z15-sku-14050601/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 5/8X3/8" , set of 14050601 + 14080300 SKU: 14050600](https://maedler.in/product/chain-stretcher-for-roller-chain-5-8x3-8-set-of-14050601-14080300-sku-14050600/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 08 B-1 1/2" x 5/16" Z=15 SKU: 14050501](https://maedler.in/product/sprocket-set-for-chain-tensioners-08-b-1-1-2-x-5-16-z15-sku-14050501/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 1/2X5/16" , set of 14050501 + 14080200 SKU: 14050500](https://maedler.in/product/chain-stretcher-for-roller-chain-1-2x5-16-set-of-14050501-14080200-sku-14050500/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 083 1/2" x 3/16" Z=18 SKU: 14050301](https://maedler.in/product/sprocket-set-for-chain-tensioners-083-1-2-x-3-16-z18-sku-14050301/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 1/2X3/16" , set of 14050301 + 14080216 SKU: 14050300](https://maedler.in/product/chain-stretcher-for-roller-chain-1-2x3-16-set-of-14050301-14080216-sku-14050300/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 081 1/2" x 1/8" Z=18 SKU: 14050201](https://maedler.in/product/sprocket-set-for-chain-tensioners-081-1-2-x-1-8-z18-sku-14050201/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 1/2X1/8" , set of 14050201 + 14080216 SKU: 14050200](https://maedler.in/product/chain-stretcher-for-roller-chain-1-2x1-8-set-of-14050201-14080216-sku-14050200/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Sprocket set for chain tensioners 06 B-1 3/8" x 7/32" Z=15 SKU: 14050101](https://maedler.in/product/sprocket-set-for-chain-tensioners-06-b-1-3-8-x-7-32-z15-sku-14050101/): Material: Sprocket from steel St40/St50. Bearing from roller bearing steel. Screw and nuts from steel, zinc-plated. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. * Please note the size of the hole. - [chain-stretcher for roller chain 3/8 x 7/32" , set of 14050101 + 14080200 SKU: 14050100](https://maedler.in/product/chain-stretcher-for-roller-chain-3-8-x-7-32-set-of-14050101-14080200-sku-14050100/): Material: Housing sintered steel or grey cast iron GG20, lever St52, sprocket made of steel. This tensioning element, a continually-tensioning torsion element, prolongs the service life of chain and belt drives by at least 30%, and radically reduces maintenance and repair work. The unique operating principle of this spring offers a long tensioning distance, especially as the lever can be pre-tensioned by up to 30° in both directions. The permanent torsion force does not only automatically compensate the chain elongation, the rubber mounted element also dampens vibrations and shocks in the entire drive. Other advantages: chain track adjustable, rubber suspension, adjustable at an angle of 360º, tensioning pressure steplessly adjustable from 'normal' to 'hard'. Can be used for both tensioning directions. - [Chain tensioner SPANN-BOY® TS-EP 06 B-3 SKU: 14041831](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-06-b-3-sku-14041831/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 05 B-3 SKU: 14041830](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-05-b-3-sku-14041830/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 10 B-2 SKU: 14041826](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-10-b-2-sku-14041826/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 08 B-2 SKU: 14041825](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-08-b-2-sku-14041825/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 06 B-2 SKU: 14041821](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-06-b-2-sku-14041821/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 12 B-1 SKU: 14041807](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-12-b-1-sku-14041807/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 10 B-1 SKU: 14041806](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-10-b-1-sku-14041806/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP 08 B-1 SKU: 14041805](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-08-b-1-sku-14041805/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS-EP up to 06 B-1 SKU: 14041800](https://maedler.in/product/chain-tensioner-spann-boy-ts-ep-up-to-06-b-1-sku-14041800/): Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These ready-to-install chain tensioners enable quiet, low-wear running of roller chains under varying operating conditions, for example at changing angle of the chain drive.Needed space below chain only 40mm.With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.Usable travel about 40mm.Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 06 B-3 stainless steel SKU: 14040931](https://maedler.in/product/chain-tensioner-spann-boy-ts-06-b-3-stainless-steel-sku-14040931/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 05 B-3 stainless steel SKU: 14040930](https://maedler.in/product/chain-tensioner-spann-boy-ts-05-b-3-stainless-steel-sku-14040930/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 10 B-2 stainless steel SKU: 14040926](https://maedler.in/product/chain-tensioner-spann-boy-ts-10-b-2-stainless-steel-sku-14040926/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 08 B-2 stainless steel SKU: 14040925](https://maedler.in/product/chain-tensioner-spann-boy-ts-08-b-2-stainless-steel-sku-14040925/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 06 B-2 stainless steel SKU: 14040921](https://maedler.in/product/chain-tensioner-spann-boy-ts-06-b-2-stainless-steel-sku-14040921/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 12 B-1 stainless steel SKU: 14040907](https://maedler.in/product/chain-tensioner-spann-boy-ts-12-b-1-stainless-steel-sku-14040907/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 10 B-1 stainless steel SKU: 14040906](https://maedler.in/product/chain-tensioner-spann-boy-ts-10-b-1-stainless-steel-sku-14040906/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS 08 B-1 stainless steel SKU: 14040905](https://maedler.in/product/chain-tensioner-spann-boy-ts-08-b-1-stainless-steel-sku-14040905/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Chain tensioner SPANN-BOY® TS up to 06 B-1 stainless steel SKU: 14040901](https://maedler.in/product/chain-tensioner-spann-boy-ts-up-to-06-b-1-stainless-steel-sku-14040901/): Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW.These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives.• Needed space below chain only 40mm.• With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces.• Usable travel about 40mm.• Interchangeable with similar parts of other suppliers.Temperature range: -20°C to +60°C (short time up to +80°C). - [Precision single universal joint WER DIN 808 simple, bore 22H7 stainless steel 1.4301 total length 127mm outer diameter 47mm SKU: 63199247](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-22h7stainless-steel-1-4301-total-length-127mm-outer-diameter-47mm-sku-63199247/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 20H7 stainless steel 1.4301 total length 108mm outer diameter 40mm SKU: 63199240](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-20h7stainless-steel-1-4301-total-length-108mm-outer-diameter-40mm-sku-63199240/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199237N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199237n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 18H7 stainless steel 1.4301 total length 108mm outer diameter 37mm SKU: 63199237](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-18h7stainless-steel-1-4301-total-length-108mm-outer-diameter-37mm-sku-63199237/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199232N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199232n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 16H7 stainless steel 1.4301 total length 95mm outer diameter 32mm SKU: 63199232](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-16h7stainless-steel-1-4301-total-length-95mm-outer-diameter-32mm-sku-63199232/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 14H7 stainless steel 1.4301 total length 90mm outer diameter 29mm SKU: 63199229](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-14h7stainless-steel-1-4301-total-length-90mm-outer-diameter-29mm-sku-63199229/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 12H7 stainless steel 1.4301 total length 86mm outer diameter 25mm SKU: 63199226](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-12h7stainless-steel-1-4301-total-length-86mm-outer-diameter-25mm-sku-63199226/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 10 H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199220N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-10-h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199220n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 10 H7 stainless steel 1.4301 total length 76mm outer diameter 22mm SKU: 63199220](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-10-h7stainless-steel-1-4301-total-length-76mm-outer-diameter-22mm-sku-63199220/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 8H7 stainless steel 1.4301 total length 58mm outer diameter 16mm SKU: 63199216](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-8h7stainless-steel-1-4301-total-length-58mm-outer-diameter-16mm-sku-63199216/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 6H7 stainless steel 1.4301 total length 50mm outer diameter 13mm SKU: 63199215](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-6h7stainless-steel-1-4301-total-length-50mm-outer-diameter-13mm-sku-63199215/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 30H7 with keyway DIN 6885-1 on both sides SKU: 63199163N](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-30h7-with-keyway-din-6885-1-on-both-sides-sku-63199163n/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 30H7 SKU: 63199163](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-30h7-sku-63199163/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 25H7 with keyway DIN 6885-1 on both sides SKU: 63199150N](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-25h7-with-keyway-din-6885-1-on-both-sides-sku-63199150n/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 25H7 SKU: 63199150](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-25h7-sku-63199150/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 20H7 with keyway DIN 6885-1 on both sides SKU: 63199140N](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-20h7-with-keyway-din-6885-1-on-both-sides-sku-63199140n/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 20H7 SKU: 63199140](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-20h7-sku-63199140/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 16H7 with keyway DIN 6885-1 on both sides SKU: 63199132N](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-16h7-with-keyway-din-6885-1-on-both-sides-sku-63199132n/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 16H7 SKU: 63199132](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-16h7-sku-63199132/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides SKU: 63199126N](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-14h7-with-keyway-din-6885-1-on-both-sides-sku-63199126n/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 14H7 SKU: 63199126](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-14h7-sku-63199126/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 10H7 with keyway DIN 6885-1 on both sides SKU: 63199122N](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-10h7-with-keyway-din-6885-1-on-both-sides-sku-63199122n/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WENR stainless steel 1.4301 with needle bearing made of bearing steel bore 10H7 SKU: 63199122](https://maedler.in/product/precision-single-universal-joint-wenr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-10h7-sku-63199122/): Material: Stainless Steel 1.4301 (X5CrNi1810, AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 500mm max. length 600mm steel SKU: 63197000N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-35h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-500mm-max-length-600mm-steel-sku-63197000n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings both sides bore 35H7 telescoped length 500mm max. length 600mm steel outer diameter 70mm SKU: 63197000](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-both-sides-bore-35h7-telescoped-length-500mm-max-length-600mm-steelouter-diameter-70mm-sku-63197000/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings both sides bore 30H7 telescoped length 400mm max. length 490mm steel outer diameter 63mm SKU: 63196300](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-both-sides-bore-30h7-telescoped-length-400mm-max-length-490mm-steelouter-diameter-63mm-sku-63196300/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings both sides bore 25H7 telescoped length 350mm max. length 435mm steel outer diameter 50mm SKU: 63195000](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-both-sides-bore-25h7-telescoped-length-350mm-max-length-435mm-steelouter-diameter-50mm-sku-63195000/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings both sides bore 22H7 telescoped length 330mm max. length 430mm steel outer diameter 47mm SKU: 63194700](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-both-sides-bore-22h7-telescoped-length-330mm-max-length-430mm-steelouter-diameter-47mm-sku-63194700/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 290mm max. length 360mm steel SKU: 63194000N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-290mm-max-length-360mm-steel-sku-63194000n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings both sides bore 20H7 telescoped length 290mm max. length 360mm steel outer diameter 40mm SKU: 63194000](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-both-sides-bore-20h7-telescoped-length-290mm-max-length-360mm-steelouter-diameter-40mm-sku-63194000/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 270mm max. length 370mm steel SKU: 63193700N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-270mm-max-length-370mm-steel-sku-63193700n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings both sides bore 18H7 telescoped length 270mm max. length 370mm steel outer diameter 37mm SKU: 63193700](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-both-sides-bore-18h7-telescoped-length-270mm-max-length-370mm-steelouter-diameter-37mm-sku-63193700/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings both sides bore 16H7 telescoped length 250mm max. length 320mm steel outer diameter 32mm SKU: 63193200](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-both-sides-bore-16h7-telescoped-length-250mm-max-length-320mm-steelouter-diameter-32mm-sku-63193200/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings both sides bore 14H7 telescoped length 220mm max. length 270mm steel outer diameter 25mm SKU: 63192500](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-both-sides-bore-14h7-telescoped-length-220mm-max-length-270mm-steelouter-diameter-25mm-sku-63192500/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings both sides bore 10H7 telescoped length 170mm max. length 200mm steel outer diamter 20mm SKU: 63192000](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-both-sides-bore-10h7-telescoped-length-170mm-max-length-200mm-steelouter-diamter-20mm-sku-63192000/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 400mm max. length 510mm steel SKU: 63185800N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-400mm-max-length-510mm-steel-sku-63185800n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW both sides bore 30H7 telescoped length 400mm max. length 510mm steel outer diameter 58mm SKU: 63185800](https://maedler.in/product/slip-shaft-with-joints-pw-both-sides-bore-30h7-telescoped-length-400mm-max-length-510mm-steel-outer-diameter-58mm-sku-63185800/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 350mm max. length 450mm steel SKU: 63185000N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-350mm-max-length-450mm-steel-sku-63185000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW both sides bore 25H7 telescoped length 350mm max. length 450mm steel outer diameter 50mm SKU: 63185000](https://maedler.in/product/slip-shaft-with-joints-pw-both-sides-bore-25h7-telescoped-length-350mm-max-length-450mm-steel-outer-diameter-50mm-sku-63185000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW both sides bore 22H7 telescoped length 330mm max. length 430mm steel outer diameter 47mm SKU: 63184700](https://maedler.in/product/slip-shaft-with-joints-pw-both-sides-bore-22h7-telescoped-length-330mm-max-length-430mm-steel-outer-diameter-47mm-sku-63184700/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 290mm max. length 390mm steel SKU: 63184000N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-290mm-max-length-390mm-steel-sku-63184000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW both sides bore 20H7 telescoped length 290mm max. length 390mm steel outer diameter 40mm SKU: 63184000](https://maedler.in/product/slip-shaft-with-joints-pw-both-sides-bore-20h7-telescoped-length-290mm-max-length-390mm-steel-outer-diameter-40mm-sku-63184000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 270mm max. length 370mm steel SKU: 63183700N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-270mm-max-length-370mm-steel-sku-63183700n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW both sides bore 18H7 telescoped length 270mm max. length 370mm steel outer diameter 37mm SKU: 63183700](https://maedler.in/product/slip-shaft-with-joints-pw-both-sides-bore-18h7-telescoped-length270mm-max-length-370mm-steel-outer-diameter-37mm-sku-63183700/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 250mm max. length 340mm steel SKU: 63183200N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-250mm-max-length-340mm-steel-sku-63183200n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW both sides bore 16H7 telescoped length 250mm max. length 340mm steel outer diameter 32mm SKU: 63183200](https://maedler.in/product/slip-shaft-with-joints-pw-both-sides-bore-16h7-telescoped-length-250mm-max-length-340mm-steel-outer-diameter-32mm-sku-63183200/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW both sides bore 14H7 telescoped length 210mm max. length 280mm steel outer diameter 29mm SKU: 63182900](https://maedler.in/product/slip-shaft-with-joints-pw-both-sides-bore-14h7-telescoped-length-210mm-max-length-280mm-steel-outer-diameter-29mm-sku-63182900/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 200mm max. length 270mm steel SKU: 63182600N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-200mm-max-length-270mm-steel-sku-63182600n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW both sides bore 12H7 telescoped length 200mm max. length 270mm steel outer diameter 25mm SKU: 63182600](https://maedler.in/product/slip-shaft-with-joints-pw-both-sides-bore-12h7-telescoped-length-200mm-max-length-270mm-steel-outer-diameter-25mm-sku-63182600/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW both sides bore 10H7 telescoped length 170mm max. length 230mm steel outer diameter 22mm SKU: 63182000](https://maedler.in/product/slip-shaft-with-joints-pw-both-sides-bore-10h7-telescoped-length-170mm-max-length-230mm-steel-outer-diameter-22mm-sku-63182000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 40H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63178000N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-40h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63178000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 40H7 material steel total length 245mm outer diameter 80mm SKU: 63178000](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-40h7-material-steeltotal-length-245mm-outer-diameter-80mm-sku-63178000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63177000N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-35h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63177000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 35H7 material steel total length 212mm outer diameter 78mm SKU: 63177000](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-35h7-material-steeltotal-length-212mm-outer-diameter-78mm-sku-63177000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63175800N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63175800n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 30H7 material steel total length 182mm outer diameter 58mm SKU: 63175800](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-30h7-material-steeltotal-length-182mm-outer-diameter-58mm-sku-63175800/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63175000N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63175000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 25H7 material steel total length 163mm outer diameter 50mm SKU: 63175000](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-25h7-material-steeltotal-length-163mm-outer-diameter-50mm-sku-63175000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63174700N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63174700n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 22H7 material steel total length 145mm outer diameter 40mm SKU: 63174700](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-22h7-material-steeltotal-length-145mm-outer-diameter-40mm-sku-63174700/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63174000N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63174000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 20H7 material steel total length 128mm outer diameter 40mm SKU: 63174000](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-20h7-material-steeltotal-length-128mm-outer-diameter-40mm-sku-63174000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 18H7 material steel total length 112mm outer diameter 32mm SKU: 63173700](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-18h7-material-steeltotal-length-112mm-outer-diameter-32mm-sku-63173700/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63173200N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63173200n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 16H7 material steel total length 100mm outer diameter 29mm SKU: 63173200](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-16h7-material-steeltotal-length-100mm-outer-diameter-29mm-sku-63173200/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63172900N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63172900n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 14H7 material steel total length 85mm outer diameter 25mm SKU: 63172900](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-14h7-material-steeltotal-length-85mm-outer-diameter-25mm-sku-63172900/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 12H7 material steel total length 74mm outer diameter 22mm SKU: 63172600](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-12h7-material-steeltotal-length-74mm-outer-diameter-22mm-sku-63172600/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 10H7 material steel total length 75mm outer diameter 20mm SKU: 63172000](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-10h7-material-steeltotal-length-75mm-outer-diameter-20mm-sku-63172000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63171600N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63171600n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 8H7 material steel total length 67mm outer diameter 16mm SKU: 63171600](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-8h7-material-steeltotal-length-67mm-outer-diameter-16mm-sku-63171600/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 double bore 6H7 material steel total length 61mm outer diameter 16mm SKU: 63171500](https://maedler.in/product/precision-double-universal-joint-wd-din808-double-bore-6h7-material-steeltotal-length-61mm-outer-diameter-16mm-sku-63171500/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 double bore 40H7 material steel total length 290mm outer diameter 80mm SKU: 63168000](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-double-bore-40h7material-steel-total-length-290mm-outer-diameter-80mm-sku-63168000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 double bore 35H7 material steel total length 212mm outer diameter 70mm SKU: 63167000](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-double-bore-35h7material-steel-total-length-212mm-outer-diameter-70mm-sku-63167000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 double bore 30H7 material steel total length 238mm outer diameter 63mm SKU: 63166300](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-double-bore-30h7material-steel-total-length-238mm-outer-diameter-63mm-sku-63166300/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 double bore 25H7 material steel total length 188mm outer diameter 50mm SKU: 63165000](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-double-bore-25h7material-steel-total-length-188mm-outer-diameter-50mm-sku-63165000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63164000N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63164000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 double bore 20H7 material steel total length 156mm outer diameter 40mm SKU: 63164000](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-double-bore-20h7material-steel-total-length-156mm-outer-diameter-40mm-sku-63164000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63163200N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63163200n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 double bore 16H7 material steel total length 124mm outer diameter 32mm SKU: 63163200](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-double-bore-16h7material-steel-total-length-124mm-outer-diameter-32mm-sku-63163200/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63162600N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63162600n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 double bore 14H7 material steel total length 104mm outer diameter 25mm SKU: 63162600](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-double-bore-14h7material-steel-total-length-104mm-outer-diameter-25mm-sku-63162600/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63162000N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63162000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 double bore 10H7 material steel total length 88mm outer diameter 20mm SKU: 63162000](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-double-bore-10h7material-steel-total-length-88mm-outer-diameter-20mm-sku-63162000/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 50H7 outer diameter 80mm steel SKU: 63158000](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-50h7-outer-diameter-80mm-steel-sku-63158000/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 45H7 outer diameter 70mm steel SKU: 63157000](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-45h7-outer-diameter-70mm-steel-sku-63157000/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 40H7 outer diameter 65mm steel SKU: 63156500](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-40h7-outer-diameter-65mm-steel-sku-63156500/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 35H7 with keyway DIN 6885-1 on both sides outer diameter 60mm steel SKU: 63156000N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-35h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-60mm-steel-sku-63156000n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 35H7 outer diameter 60mm steel SKU: 63156000](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-35h7-outer-diameter-60mm-steel-sku-63156000/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 30H7 outer diameter 55mm steel SKU: 63155500](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-30h7-outer-diameter-55mm-steel-sku-63155500/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 25H7 with keyway DIN 6885-1 on both sides outer diameter 50mm steel SKU: 63155000N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-25h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-50mm-steel-sku-63155000n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 25H7 outer diameter 50mm steel SKU: 63155000](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-25h7-outer-diameter-50mm-steel-sku-63155000/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 22H7 with keyway DIN 6885-1 on both sides outer diameter 45mm steel SKU: 63154500N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-22h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-45mm-steel-sku-63154500n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 22H7 outer diameter 45mm steel SKU: 63154500](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-22h7-outer-diameter-45mm-steel-sku-63154500/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 20H7 outer diameter 40mm steel SKU: 63154000](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-20h7-outer-diameter-40mm-steel-sku-63154000/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 18H7 with keyway DIN 6885-1 on both sides outer diameter 36mm steel SKU: 63153600N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-18h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-36mm-steel-sku-63153600n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 18H7 outer diameter 36mm steel SKU: 63153600](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-18h7-outer-diameter-36mm-steel-sku-63153600/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 16H7 outer diameter 32mm steel SKU: 63153200](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-16h7-outer-diameter-32mm-steel-sku-63153200/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 14H7 outer diameter 28mm steel SKU: 63152800](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-14h7-outer-diameter-28mm-steel-sku-63152800/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. Slip Shafts with ball joints LW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 20 teeth tooth width 4mm outside diameter 11mm SKU: 21102000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-20-teeth-tooth-width-4mm-outside-diameter-11mm-sku-21102000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 19 teeth tooth width 4mm outside diameter 10.5mm SKU: 21101900](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-19-teeth-tooth-width-4mm-outside-diameter-10-5mm-sku-21101900/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 18 teeth tooth width 4mm outside diameter 10mm SKU: 21101800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-18-teeth-tooth-width-4mm-outside-diameter-10mm-sku-21101800/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 17 teeth tooth width 4mm outside diameter 9.5mm SKU: 21101700](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-17-teeth-tooth-width-4mm-outside-diameter-9-5mm-sku-21101700/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 16 teeth tooth width 4mm outside diameter 9mm SKU: 21101600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-16-teeth-tooth-width-4mm-outside-diameter-9mm-sku-21101600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 15 teeth tooth width 4mm outside diameter 8.5mm SKU: 21101500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-15-teeth-tooth-width-4mm-outside-diameter-8-5mm-sku-21101500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 14 teeth tooth width 4mm outside diameter 8mm SKU: 21101400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-14-teeth-tooth-width-4mm-outside-diameter-8mm-sku-21101400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 13 teeth tooth width 4mm outside diameter 7mm SKU: 21101300](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-13-teeth-tooth-width-4mm-outside-diameter-7mm-sku-21101300/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 12 teeth tooth width 4mm outside diameter 7mm SKU: 21101200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-12-teeth-tooth-width-4mm-outside-diameter-7mm-sku-21101200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 10 teeth tooth width 4mm outside diameter 6mm SKU: 21101000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-10-teeth-tooth-width-4mm-outside-diameter-6mm-sku-21101000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 60 teeth tooth width 25mm SKU: 21099060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-60-teeth-tooth-width-25mm-sku-21099060/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 50 teeth tooth width 25mm SKU: 21099050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-50-teeth-tooth-width-25mm-sku-21099050/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 45 teeth tooth width 25mm SKU: 21099045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-45-teeth-tooth-width-25mm-sku-21099045/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 40 teeth tooth width 25mm SKU: 21099040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-40-teeth-tooth-width-25mm-sku-21099040/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 36 teeth tooth width 25mm SKU: 21099036](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-36-teeth-tooth-width-25mm-sku-21099036/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 30 teeth tooth width 25mm SKU: 21099030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-30-teeth-tooth-width-25mm-sku-21099030/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 25 teeth tooth width 25mm SKU: 21099025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-25-teeth-tooth-width-25mm-sku-21099025/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 24 teeth tooth width 25mm SKU: 21099024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-24-teeth-tooth-width-25mm-sku-21099024/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 20 teeth tooth width 25mm SKU: 21099020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-20-teeth-tooth-width-25mm-sku-21099020/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 18 teeth tooth width 25mm SKU: 21099018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-18-teeth-tooth-width-25mm-sku-21099018/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 15 teeth tooth width 25mm SKU: 21099015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-15-teeth-tooth-width-25mm-sku-21099015/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 12 teeth tooth width 25mm SKU: 21099012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-metrical-pitch-10mm-12-teeth-tooth-width-25mm-sku-21099012/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 60 teeth tooth width 25mm SKU: 21006000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-60-teeth-tooth-width-25mm-sku-21006000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 50 teeth tooth width 25mm SKU: 21005000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-50-teeth-tooth-width-25mm-sku-21005000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 45 teeth tooth width 25mm SKU: 21004500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-45-teeth-tooth-width-25mm-sku-21004500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 40 teeth tooth width 25mm SKU: 21004000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-40-teeth-tooth-width-25mm-sku-21004000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 36 teeth tooth width 25mm SKU: 21003600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-36-teeth-tooth-width-25mm-sku-21003600/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 30 teeth tooth width 25mm SKU: 21003000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-30-teeth-tooth-width-25mm-sku-21003000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 25 teeth tooth width 25mm SKU: 21002500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-25-teeth-tooth-width-25mm-sku-21002500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 24 teeth tooth width 25mm SKU: 21002400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-24-teeth-tooth-width-25mm-sku-21002400/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 20 teeth tooth width 25mm SKU: 21002000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-20-teeth-tooth-width-25mm-sku-21002000/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 18 teeth tooth width 25mm SKU: 21001800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-18-teeth-tooth-width-25mm-sku-21001800/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 15 teeth tooth width 25mm SKU: 21001500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-15-teeth-tooth-width-25mm-sku-21001500/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of steel C45 with hub module 3.18 (metrical pitch 10mm) 12 teeth tooth width 25mm SKU: 21001200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-metrical-pitch-10mm-12-teeth-tooth-width-25mm-sku-21001200/): Material: Steel C45. Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 60 teeth tooth width 12mm SKU: 20599060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-60-teeth-tooth-width-12mm-sku-20599060/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 50 teeth tooth width 12mm SKU: 20599050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-50-teeth-tooth-width-12mm-sku-20599050/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 45 teeth tooth width 12mm SKU: 20599045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-45-teeth-tooth-width-12mm-sku-20599045/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 40 teeth tooth width 12mm SKU: 20599040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-40-teeth-tooth-width-12mm-sku-20599040/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 36 teeth tooth width 12mm SKU: 20599036](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-36-teeth-tooth-width-12mm-sku-20599036/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 30 teeth tooth width 12mm SKU: 20599030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-30-teeth-tooth-width-12mm-sku-20599030/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 25 teeth tooth width 12mm SKU: 20599025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-25-teeth-tooth-width-12mm-sku-20599025/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 24 teeth tooth width 12mm SKU: 20599024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-24-teeth-tooth-width-12mm-sku-20599024/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 20 teeth tooth width 12mm SKU: 20599020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-20-teeth-tooth-width-12mm-sku-20599020/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 18 teeth tooth width 12mm SKU: 20599018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-18-teeth-tooth-width-12mm-sku-20599018/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 15 teeth tooth width 12mm SKU: 20599015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-15-teeth-tooth-width-12mm-sku-20599015/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Spur gear made of stainless steel 1.4305 with hub module 1.59 (metrical pitch 5mm) 12 teeth tooth width 12mm SKU: 20599012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-59-metrical-pitch-5mm-12-teeth-tooth-width-12mm-sku-20599012/): Material: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. Standard design with one-sided hub. Other models and number of teeth on request. - [Mounting screw M16 stainless steel for chain tensioning wheel KSP and KSP-R SKU: 14099901](https://maedler.in/product/mounting-screw-m16-stainless-steel-for-chain-tensioning-wheel-ksp-and-ksp-r-sku-14099901/): Material: Stainless steel 1.4301 (AISI 304).Product No. 140 991 01: Screw for chain tensioning wheels KSP-R up to size 12 B-1 (bore 16mm).Product No. 140 999 01: Screw for chain tensioning wheel KSP-R, only for size 16 B-1 (bore 20mm), but not for product no. 140 990 08. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1"x17,02mm 17 teeth with ball bearing SKU: 14099817](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-16-b-1-1x1702mm-17-teeth-with-ball-bearing-sku-14099817/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1"x17,02mm 15 teeth with ball bearing SKU: 14099815](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-16-b-1-1x1702mm-15-teeth-with-ball-bearing-sku-14099815/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Tensioning element stainless steel size 4 1500 N SKU: 14099804](https://maedler.in/product/tensioning-element-stainless-steel-size-4-1500-n-sku-14099804/): Material: Stainless steel 1.4301 or 1.4308. The design of this tensioning element is identical to the standard version. - [Tensioning element stainless steel size 3 810 N SKU: 14099803](https://maedler.in/product/tensioning-element-stainless-steel-size-3-810-n-sku-14099803/): Material: Stainless steel 1.4301 or 1.4308. The design of this tensioning element is identical to the standard version. - [Tensioning element stainless steel size 2 350 N SKU: 14099802](https://maedler.in/product/tensioning-element-stainless-steel-size-2-350-n-sku-14099802/): Material: Stainless steel 1.4301 or 1.4308. The design of this tensioning element is identical to the standard version. - [Tensioning element stainless steel size 1 135 N SKU: 14099801](https://maedler.in/product/tensioning-element-stainless-steel-size-1-135-n-sku-14099801/): Material: Stainless steel 1.4301 or 1.4308. The design of this tensioning element is identical to the standard version. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1"x17,02mm 12 teeth with ball bearing SKU: 14099800](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-16-b-1-1x1702mm-12-teeth-with-ball-bearing-sku-14099800/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 16 teeth with ball bearing SKU: 14099716](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-16-teeth-with-ball-bearing-sku-14099716/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 13 teeth with ball bearing SKU: 14099713](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-13-teeth-with-ball-bearing-sku-14099713/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 12 teeth with ball bearing SKU: 14099712](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-12-teeth-with-ball-bearing-sku-14099712/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 15 teeth with ball bearing SKU: 14099700](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-15-teeth-with-ball-bearing-sku-14099700/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 21 teeth with ball bearing SKU: 14099621](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-21-teeth-with-ball-bearing-sku-14099621/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 18 teeth with ball bearing SKU: 14099618](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-18-teeth-with-ball-bearing-sku-14099618/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 16 teeth with ball bearing SKU: 14099616](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-16-teeth-with-ball-bearing-sku-14099616/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 15 teeth with ball bearing SKU: 14099615](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-15-teeth-with-ball-bearing-sku-14099615/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 14 teeth with ball bearing SKU: 14099614](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-14-teeth-with-ball-bearing-sku-14099614/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 13 teeth with ball bearing SKU: 14099613](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-13-teeth-with-ball-bearing-sku-14099613/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 17 teeth with ball bearing SKU: 14099600](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-17-teeth-with-ball-bearing-sku-14099600/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 21 teeth with ball bearing SKU: 14099521](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-21-teeth-with-ball-bearing-sku-14099521/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 20 teeth with ball bearing SKU: 14099520](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-20-teeth-with-ball-bearing-sku-14099520/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 16 teeth with ball bearing SKU: 14099516](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-16-teeth-with-ball-bearing-sku-14099516/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 15 teeth with ball bearing SKU: 14099515](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-15-teeth-with-ball-bearing-sku-14099515/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 14 teeth with ball bearing SKU: 14099514](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-14-teeth-with-ball-bearing-sku-14099514/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners, double 16 B-2 1" x 17,02mm Z=13 stainless steel SKU: 140995082](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-16-b-2-1-x-1702mm-z13-stainless-steel-sku-140995082/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 16 B-1 1" x 17,02mm Z=13 stainless steel SKU: 14099508](https://maedler.in/product/sprocket-set-for-chain-tensioners-16-b-1-1-x-1702mm-z13-stainless-steel-sku-14099508/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Sprocket set for chain tensioners, double 12 B-2 3/4" x 7/16" Z=15 stainless steel SKU: 140995072](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-12-b-2-3-4-x-7-16-z15-stainless-steel-sku-140995072/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 12 B-1 3/4" x 7/16" Z=15 stainless steel SKU: 14099507](https://maedler.in/product/sprocket-set-for-chain-tensioners-12-b-1-3-4-x-7-16-z15-stainless-steel-sku-14099507/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Sprocket set for chain tensioners, double 10 B-2 5/8" x 3/8" Z=15 stainless steel SKU: 140995062](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-10-b-2-5-8-x-3-8-z15-stainless-steel-sku-140995062/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 10 B-1 5/8" x 3/8" Z=15 stainless steel SKU: 14099506](https://maedler.in/product/sprocket-set-for-chain-tensioners-10-b-1-5-8-x-3-8-z15-stainless-steel-sku-14099506/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Sprocket set for chain tensioners, double 08 B-2 1/2" x 5/16" Z=15 stainless steel SKU: 140995052](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-08-b-2-1-2-x-5-16-z15-stainless-steel-sku-140995052/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 08 B-1 1/2" x 5/16" Z=15 stainless steel SKU: 14099505](https://maedler.in/product/sprocket-set-for-chain-tensioners-08-b-1-1-2-x-5-16-z15-stainless-steel-sku-14099505/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Sprocket set for chain tensioners, double 06 B-2 3/8" x 7/32" Z=15 stainless steel SKU: 140995012](https://maedler.in/product/sprocket-set-for-chain-tensioners-double-06-b-2-3-8-x-7-32-z15-stainless-steel-sku-140995012/): Material: Sprockets from stainless steel 1.4301 (AISI 304).Bearings from stainless roller bearing steel. Screw and nuts from stainless steel.The sprockets can be moved on the screw and thus be aligned with the chain. They are locked in the desired position by the nuts. The permanently lubricated 2Z bearings enable a light running. Accurate-to-size spacers guarantee perfect meshing of teeth and sprocket. Temperature range: -20º to +120ºC. - [Sprocket set for chain tensioners 06 B-1 3/8" x 7/32" Z=15 stainless steel SKU: 14099501](https://maedler.in/product/sprocket-set-for-chain-tensioners-06-b-1-3-8-x-7-32-z15-stainless-steel-sku-14099501/): Material: Sprocket from stainless steel 1.4301 (AISI 304). Bearing from stainless roller bearing steel. Screw and nuts from stainless steel. The sprocket can be moved on the screw and thus be aligned with the chain. It is locked in the desired position by the nuts. The permanently lubricated 2Z bearing enables a light running. Temperature range: -20° to +120°C. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 18 teeth with ball bearing SKU: 14099500](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-18-teeth-with-ball-bearing-sku-14099500/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 083 1/2x3/16" 16 teeth with ball bearing SKU: 14099316](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-083-1-2x3-16-16-teeth-with-ball-bearing-sku-14099316/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 083 1/2x3/16" 18 teeth with ball bearing SKU: 14099300](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-083-1-2x3-16-18-teeth-with-ball-bearing-sku-14099300/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 20 teeth with ball bearing SKU: 14099120](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-06-b-1-3-8x7-32-20-teeth-with-ball-bearing-sku-14099120/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Mounting screw M12 stainless steel for chain tensioning wheel KSP and KSP-R SKU: 14099101](https://maedler.in/product/mounting-screw-m12-stainless-steel-for-chain-tensioning-wheel-ksp-and-ksp-r-sku-14099101/): Material: Stainless steel 1.4301 (AISI 304).Product No. 140 991 01: Screw for chain tensioning wheels KSP-R up to size 12 B-1 (bore 16mm).Product No. 140 999 01: Screw for chain tensioning wheel KSP-R, only for size 16 B-1 (bore 20mm), but not for product no. 140 990 08. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 21 teeth with ball bearing SKU: 14099100](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-06-b-1-3-8x7-32-21-teeth-with-ball-bearing-sku-14099100/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 16 B-1 1"x17.02mm 13 teeth with ball bearing SKU: 14099008](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-16-b-1-1x17-02mm-13-teeth-with-ball-bearing-sku-14099008/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 12 B-1 3/4x7/16" 15 teeth with ball bearing SKU: 14099007](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-12-b-1-3-4x7-16-15-teeth-with-ball-bearing-sku-14099007/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 10 B-1 5/8x3/8" 15 teeth with ball bearing SKU: 14099006](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-10-b-1-5-8x3-8-15-teeth-with-ball-bearing-sku-14099006/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 08 B-1 1/2x5/16" 15 teeth with ball bearing SKU: 14099005](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-08-b-1-1-2x5-16-15-teeth-with-ball-bearing-sku-14099005/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 06 B-1 3/8x7/32" 15 teeth with ball bearing SKU: 14099001](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-06-b-1-3-8x7-32-15-teeth-with-ball-bearing-sku-14099001/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain tensioning wheel KSP-R material 1.4301 (AISI 304) 05 B-1 pitch 8mm 23 teeth with ball bearing SKU: 14099000](https://maedler.in/product/chain-tensioning-wheel-ksp-r-material-1-4301-aisi-304-05-b-1-pitch-8mm-23-teeth-with-ball-bearing-sku-14099000/): Material: Sprocket stainless steel 1.4301 (AISI 304). Bearing made from stainless roller bearing steel. Ready-to-mount idlers, complete with bearing. Cost-efficient. Can be mounted at the deflection or tensioning points. Perfect workmanship and stable mounting of the ball bearing with shields on both sides guarantee a high resistance against breakage and wear. Easy to mount by the extra long internal ring. Also suitable for agricultural and textile machines. Maintenance-free bearing, with grease filling. Temperature range: -20º to +120ºC. - [Chain rider set 12 B-2 3/4x7/16" SKU: 14086007](https://maedler.in/product/chain-rider-set-12-b-2-3-4x7-16-sku-14086007/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 10 B-2 5/8x3/8" SKU: 14086006](https://maedler.in/product/chain-rider-set-10-b-2-5-8x3-8-sku-14086006/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 08 B-2 1/2x5/16" SKU: 14086005](https://maedler.in/product/chain-rider-set-08-b-2-1-2x5-16-sku-14086005/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 06 B-2 3/8x7/32" SKU: 14086001](https://maedler.in/product/chain-rider-set-06-b-2-3-8x7-32-sku-14086001/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 12 B-1 3/4x7/16" SKU: 14085700](https://maedler.in/product/chain-rider-set-12-b-1-3-4x7-16-sku-14085700/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 10 B-1 5/8x3/8" SKU: 14085600](https://maedler.in/product/chain-rider-set-10-b-1-5-8x3-8-sku-14085600/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 08 B-1 1/2x5/16" SKU: 14085500](https://maedler.in/product/chain-rider-set-08-b-1-1-2x5-16-sku-14085500/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Chain rider set 06 B-1 3/8x7/32" SKU: 14085100](https://maedler.in/product/chain-rider-set-06-b-1-3-8x7-32-sku-14085100/): Material: POM-H. Screw nickel-plated steel. The chain rider set is mounted on the suitable tensioning element to create a ready-to-mount, cost-efficient chain tensioner. The shape of the rider, made of high-grade, friction resistant, industrial plastic, means the rider can be used on both rider sides and the large radius guarantees quiet operation. The maximum chain speed must not exceed 1,5 m/sec. Temperature range: -40° to +100°C. Tensioning Element has to be ordered seperately. - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 5mm outer diameter 13mm == Initial lubrication required before use == SKU: 63320500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-5mm-outer-diameter-13mm-initial-lubrication-required-before-use-sku-63320500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 40mm outer diameter 87mm SKU: 63314000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-40mm-outer-diameter-87mm-sku-63314000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 35mm outer diameter 78mm SKU: 63313500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-35mm-outer-diameter-78mm-sku-63313500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 30mm outer diameter 66mm SKU: 63313000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-30mm-outer-diameter-66mm-sku-63313000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 25mm outer diameter 56mm SKU: 63312500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-25mm-outer-diameter-56mm-sku-63312500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 22mm outer diameter 50mm SKU: 63312200](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-22mm-outer-diameter-50mm-sku-63312200/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 20mm outer diameter 46mm SKU: 63312000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-20mm-outer-diameter-46mm-sku-63312000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 18mm outer diameter 42mm SKU: 63311800](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-18mm-outer-diameter-42mm-sku-63311800/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 16mm outer diameter 38mm SKU: 63311600](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-16mm-outer-diameter-38mm-sku-63311600/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 14mm outer diameter 34mm SKU: 63311400](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-14mm-outer-diameter-34mm-sku-63311400/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 12mm outer diameter 30mm SKU: 63311200](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-12mm-outer-diameter-30mm-sku-63311200/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 10mm outer diameter 26mm SKU: 63311000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-10mm-outer-diameter-26mm-sku-63311000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 8mm outer diameter 22mm SKU: 63310800](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-8mm-outer-diameter-22mm-sku-63310800/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 6mm outer diameter 18mm SKU: 63310600](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-6mm-outer-diameter-18mm-sku-63310600/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 5mm outer diameter 16mm SKU: 63310500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-5mm-outer-diameter-16mm-sku-63310500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Outer ring and bearing shell steel, zinc plated. With PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 40mm outer diameter 87mm == Initial lubrication required before use == SKU: 63304000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-40mm-outer-diameter-87mm-initial-lubrication-required-before-use-sku-63304000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 35mm outer diameter 78mm == Initial lubrication required before use == SKU: 63303500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-35mm-outer-diameter-78mm-initial-lubrication-required-before-use-sku-63303500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 30mm outer diameter 66mm == Initial lubrication required before use == SKU: 63303000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-30mm-outer-diameter-66mm-initial-lubrication-required-before-use-sku-63303000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 25mm outer diameter 56mm == Initial lubrication required before use == SKU: 63302500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-25mm-outer-diameter-56mm-initial-lubrication-required-before-use-sku-63302500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 22mm outer diameter 50mm == Initial lubrication required before use == SKU: 63302200](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-22mm-outer-diameter-50mm-initial-lubrication-required-before-use-sku-63302200/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 20mm outer diameter 46mm == Initial lubrication required before use == SKU: 63302000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-20mm-outer-diameter-46mm-initial-lubrication-required-before-use-sku-63302000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 18mm outer diameter 42mm == Initial lubrication required before use == SKU: 63301800](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-18mm-outer-diameter-42mm-initial-lubrication-required-before-use-sku-63301800/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 16mm outer diameter 38mm == Initial lubrication required before use == SKU: 63301600](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-16mm-outer-diameter-38mm-initial-lubrication-required-before-use-sku-63301600/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 14mm outer diameter 34mm == Initial lubrication required before use == SKU: 63301400](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-14mm-outer-diameter-34mm-initial-lubrication-required-before-use-sku-63301400/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 12mm outer diameter 30mm == Initial lubrication required before use == SKU: 63301200](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-12mm-outer-diameter-30mm-initial-lubrication-required-before-use-sku-63301200/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 10mm outer diameter 26mm == Initial lubrication required before use == SKU: 63301000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-10mm-outer-diameter-26mm-initial-lubrication-required-before-use-sku-63301000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 8mm outer diameter 22mm == Initial lubrication required before use == SKU: 63300800](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-8mm-outer-diameter-22mm-initial-lubrication-required-before-use-sku-63300800/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 6mm outer diameter 18mm == Initial lubrication required before use == SKU: 63300600](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-6mm-outer-diameter-18mm-initial-lubrication-required-before-use-sku-63300600/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 5mm outer diameter 16mm == Initial lubrication required before use == SKU: 63300500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-5mm-outer-diameter-16mm-initial-lubrication-required-before-use-sku-63300500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Outer ring steel 9SMnPb28K, zinc plated.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Rod end igus igubal KCLM-20 internal fine thread M20x1.5 left SKU: 63255720F](https://maedler.in/product/rod-end-igus-igubal-kclm-20-internal-fine-thread-m20x1-5-left-sku-63255720f/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-20-M20 internal thread M20 left SKU: 63255720](https://maedler.in/product/rod-end-igus-igubal-kclm-20-m20-internal-thread-m20-left-sku-63255720/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-16-F internal fine thread M16x1.5 left SKU: 63255716F](https://maedler.in/product/rod-end-igus-igubal-kclm-16-f-internal-fine-thread-m16x1-5-left-sku-63255716f/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-16 internal thread M16 left SKU: 63255716](https://maedler.in/product/rod-end-igus-igubal-kclm-16-internal-thread-m16-left-sku-63255716/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-12-F internal fine thread M12x1.25 left SKU: 63255712F](https://maedler.in/product/rod-end-igus-igubal-kclm-12-f-internal-fine-thread-m12x1-25-left-sku-63255712f/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-12 internal thread M12 left SKU: 63255712](https://maedler.in/product/rod-end-igus-igubal-kclm-12-internal-thread-m12-left-sku-63255712/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-10-F internal fine thread M10x1.25 left SKU: 63255710F](https://maedler.in/product/rod-end-igus-igubal-kclm-10-f-internal-fine-thread-m10x1-25-left-sku-63255710f/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-10 internal thread M10 left SKU: 63255710](https://maedler.in/product/rod-end-igus-igubal-kclm-10-internal-thread-m10-left-sku-63255710/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-08 internal thread M8 left SKU: 63255708](https://maedler.in/product/rod-end-igus-igubal-kclm-08-internal-thread-m8-left-sku-63255708/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-06 internal thread M6 left SKU: 63255706](https://maedler.in/product/rod-end-igus-igubal-kclm-06-internal-thread-m6-left-sku-63255706/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCLM-05 internal thread M5 left SKU: 63255705](https://maedler.in/product/rod-end-igus-igubal-kclm-05-internal-thread-m5-left-sku-63255705/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-20 internal fine thread M20x1,5 right SKU: 63255620F](https://maedler.in/product/rod-end-igus-igubal-kcrm-20-internal-fine-thread-m20x15-right-sku-63255620f/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-20 internal thread M20 right SKU: 63255620](https://maedler.in/product/rod-end-igus-igubal-kcrm-20-internal-thread-m20-right-sku-63255620/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-16-F internal fine thread M16x1.5 right SKU: 63255616F](https://maedler.in/product/rod-end-igus-igubal-kcrm-16-f-internal-fine-thread-m16x1-5-right-sku-63255616f/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-16 internal thread M16 right SKU: 63255616](https://maedler.in/product/rod-end-igus-igubal-kcrm-16-internal-thread-m16-right-sku-63255616/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-12-F internal fine thread M12x1.25 right SKU: 63255612F](https://maedler.in/product/rod-end-igus-igubal-kcrm-12-f-internal-fine-thread-m12x1-25-right-sku-63255612f/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-12 internal thread M12 right SKU: 63255612](https://maedler.in/product/rod-end-igus-igubal-kcrm-12-internal-thread-m12-right-sku-63255612/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-10-F internal fine thread M10x1.25 right SKU: 63255610F](https://maedler.in/product/rod-end-igus-igubal-kcrm-10-f-internal-fine-thread-m10x1-25-right-sku-63255610f/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-10 internal thread M10 right SKU: 63255610](https://maedler.in/product/rod-end-igus-igubal-kcrm-10-internal-thread-m10-right-sku-63255610/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-08 internal thread M8 right SKU: 63255608](https://maedler.in/product/rod-end-igus-igubal-kcrm-08-internal-thread-m8-right-sku-63255608/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-06 internal thread M6 right SKU: 63255606](https://maedler.in/product/rod-end-igus-igubal-kcrm-06-internal-thread-m6-right-sku-63255606/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Rod end igus igubal KCRM-05 internal thread M5 right SKU: 63255605](https://maedler.in/product/rod-end-igus-igubal-kcrm-05-internal-thread-m5-right-sku-63255605/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The counter part must rotate inside the bore of the spherical ball. With a metal bolt, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 30H7 with keyway DIN 6885-1 on both sides min. length 400mm max. length 490mm SKU: 63199963N](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-30h7-with-keyway-din-6885-1-on-both-sides-min-length-400mm-max-length-490mm-sku-63199963n/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 30H7 on both sides min. length 400mm max. length 490mm SKU: 63199963](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-30h7-on-both-sides-min-length-400mm-max-length-490mm-sku-63199963/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 25H7 with keyway DIN 6885-1 on both sides min. length 350mm max. length 435mm SKU: 63199950N](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-25h7-with-keyway-din-6885-1-on-both-sides-min-length-350mm-max-length-435mm-sku-63199950n/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 25H7 on both sides min. length 350mm max. length 435mm SKU: 63199950](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-25h7-on-both-sides-min-length-350mm-max-length-435mm-sku-63199950/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 20H7 with keyway DIN 6885-1 on both sides min. length 290mm max. length 360mm SKU: 63199940N](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-20h7-with-keyway-din-6885-1-on-both-sides-min-length-290mm-max-length-360mm-sku-63199940n/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 20H7 on both sides min. length 290mm max. length 360mm SKU: 63199940](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-20h7-on-both-sides-min-length-290mm-max-length-360mm-sku-63199940/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 16H7 with keyway DIN 6885-1 on both sides min. length 250mm max. length 320mm SKU: 63199932N](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-16h7-with-keyway-din-6885-1-on-both-sides-min-length-250mm-max-length-320mm-sku-63199932n/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 16H7 on both sides min. length 250mm max. length 320mm SKU: 63199932](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-16h7-on-both-sides-min-length-250mm-max-length-320mm-sku-63199932/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm SKU: 63199925N](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-14h7-with-keyway-din-6885-1-on-both-sides-min-length-220mm-max-length-270mm-sku-63199925n/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 on both sides min. length 220mm max. length 270mm SKU: 63199925](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-14h7-on-both-sides-min-length-220mm-max-length-270mm-sku-63199925/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 10H7 with keyway DIN 6885-1 on both sides min. length 170mm max. length 200mm SKU: 63199920N](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-10h7-with-keyway-din-6885-1-on-both-sides-min-length-170mm-max-length-200mm-sku-63199920n/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 10H7 on both sides min. length 170mm max. length 200mm SKU: 63199920](https://maedler.in/product/slip-shaft-with-joints-pwnr-stainless-steel-1-4301-with-needle-bearings-made-of-bearing-steel-bore-10h7-on-both-sides-min-length-170mm-max-length-200mm-sku-63199920/): Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR both sides bore 25H7 min. length 380mm max. length 430mm stainless steel 1.4301 outer diameter 50mm SKU: 63199850](https://maedler.in/product/slip-shaft-with-joints-pwr-both-sides-bore-25h7-min-length-380mm-max-length-430mm-stainless-steel-1-4301outer-diameter-50mm-sku-63199850/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR both sides bore 22H7 min. length 355mm max. length 405mm stainless steel 1.4301 outer diameter 47mm SKU: 63199847](https://maedler.in/product/slip-shaft-with-joints-pwr-both-sides-bore-22h7-min-length-355mm-max-length-405mm-stainless-steel-1-4301outer-diameter-47mm-sku-63199847/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR both sides bore 20H7 min. length 315mm max. length 365mm stainless steel 1.4301 outer diameter 40mm SKU: 63199840](https://maedler.in/product/slip-shaft-with-joints-pwr-both-sides-bore-20h7-min-length-315mm-max-length-365mm-stainless-steel-1-4301outer-diameter-40mm-sku-63199840/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR both sides bore 18H7 min. length 305mm max. length 355mm stainless steel 1.4301 outer diameter 37mm SKU: 63199837](https://maedler.in/product/slip-shaft-with-joints-pwr-both-sides-bore-18h7-min-length-305mm-max-length-355mm-stainless-steel-1-4301outer-diameter-37mm-sku-63199837/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 280mm max. length 330mm stainless steel 1.4301 SKU: 63199832N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-280mm-max-length-330mm-stainless-steel-1-4301-sku-63199832n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR both sides bore 16H7 min. length 280mm max. length 330mm stainless steel 1.4301 outer diameter 32mm SKU: 63199832](https://maedler.in/product/slip-shaft-with-joints-pwr-both-sides-bore-16h7-min-length-280mm-max-length-330mm-stainless-steel-1-4301outer-diameter-32mm-sku-63199832/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 250mm max. length 280mm stainless steel 1.4301 SKU: 63199829N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-250mm-max-length-280mm-stainless-steel-1-4301-sku-63199829n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR both sides bore 14H7 min. length 250mm max. length 280mm stainless steel 1.4301 outer diameter 29mm SKU: 63199829](https://maedler.in/product/slip-shaft-with-joints-pwr-both-sides-bore-14h7-min-length-250mm-max-length-280mm-stainless-steel-1-4301outer-diameter-29mm-sku-63199829/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR both sides bore 12H7 min. length 240mm max. length 270mm stainless steel 1.4301 outer diameter 25mm SKU: 63199826](https://maedler.in/product/slip-shaft-with-joints-pwr-both-sides-bore-12h7-min-length-240mm-max-length-270mm-stainless-steel-1-4301outer-diameter-25mm-sku-63199826/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 215mm max. length 245mm stainless steel 1.4301 SKU: 63199820N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-215mm-max-length-245mm-stainless-steel-1-4301-sku-63199820n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR both sides bore 10H7 min. length 215mm max. length 245mm stainless steel 1.4301 outer diameter 22mm SKU: 63199820](https://maedler.in/product/slip-shaft-with-joints-pwr-both-sides-bore-10h7-min-length-215mm-max-length-245mm-stainless-steel-1-4301outer-diameter-22mm-sku-63199820/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle per Joint 45°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 30H7 stainless steel 1.4301 total length 244mm outer diameter 58mm SKU: 63199757](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-30h7-stainless-steel-1-4301-total-length-244mm-outer-diameter-58mm-sku-63199757/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199750N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199750n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 25H7 stainless steel 1.4301 total length 199mm outer diameter 50mm SKU: 63199750](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-25h7-stainless-steel-1-4301-total-length-199mm-outer-diameter-50mm-sku-63199750/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 22H7 stainless steel 1.4301 total length 176mm outer diameter 40mm SKU: 63199747](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-22h7-stainless-steel-1-4301-total-length-176mm-outer-diameter-40mm-sku-63199747/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199740N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199740n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 20H7 stainless steel 1.4301 total length 154mm outer diameter 40mm SKU: 63199740](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-20h7-stainless-steel-1-4301-total-length-154mm-outer-diameter-40mm-sku-63199740/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199737N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199737n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 18H7 stainless steel 1.4301 total length 134mm outer diameter 32mm SKU: 63199737](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-18h7-stainless-steel-1-4301-total-length-134mm-outer-diameter-32mm-sku-63199737/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 16H7 stainless steel 1.4301 total length 125mm outer diameter 29mm SKU: 63199732](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-16h7-stainless-steel-1-4301-total-length-125mm-outer-diameter-29mm-sku-63199732/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199729N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199729n/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 14H7 stainless steel 1.4301 total length 119mm outer diameter 25mm SKU: 63199729](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-14h7-stainless-steel-1-4301-total-length-119mm-outer-diameter-25mm-sku-63199729/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 12H7 stainless steel 1.4301 total length 105mm outer diameter 22mm SKU: 63199726](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-12h7-stainless-steel-1-4301-total-length-105mm-outer-diameter-22mm-sku-63199726/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 30H7 with keyway DIN 6885-1 on both sides SKU: 63199663N](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-30h7-with-keyway-din-6885-1-on-both-sides-sku-63199663n/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 30H7 SKU: 63199663](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-30h7-sku-63199663/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 25H7 with keyway DIN 6885-1 on both sides SKU: 63199650N](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-25h7-with-keyway-din-6885-1-on-both-sides-sku-63199650n/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 25H7 SKU: 63199650](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-25h7-sku-63199650/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 20H7 with keyway DIN 6885-1 on both sides SKU: 63199640N](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-20h7-with-keyway-din-6885-1-on-both-sides-sku-63199640n/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 20H7 SKU: 63199640](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-20h7-sku-63199640/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 16H7 with keyway DIN 6885-1 on both sides SKU: 63199632N](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-16h7-with-keyway-din-6885-1-on-both-sides-sku-63199632n/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 16H7 SKU: 63199632](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-16h7-sku-63199632/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides SKU: 63199626N](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-14h7-with-keyway-din-6885-1-on-both-sides-sku-63199626n/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 14H7 SKU: 63199626](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-14h7-sku-63199626/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 10H7 with keyway DIN 6885-1 on both sides SKU: 63199620N](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-10h7-with-keyway-din-6885-1-on-both-sides-sku-63199620n/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision double universal joint WDNR stainless steel 1.4301 with needle bearing made of bearing steel bore 10H7 SKU: 63199620](https://maedler.in/product/precision-double-universal-joint-wdnr-stainless-steel-1-4301-with-needle-bearing-made-of-bearing-steel-bore-10h7-sku-63199620/): Material: Stainless Steel 1.4301 (X5CrNi1810). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 30H7 stainless steel 1.4301 total length 178mm outer diameter 58mm SKU: 63199257](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-30h7stainless-steel-1-4301-total-length-178mm-outer-diameter-58mm-sku-63199257/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN 808 simple, bore 25H7 stainless steel 1.4301 total length 140mm outer diameter 50mm SKU: 63199250](https://maedler.in/product/precision-single-universal-joint-wer-din-808-simple-bore-25h7stainless-steel-1-4301-total-length-140mm-outer-diameter-50mm-sku-63199250/): Material: Stainless steel 1.4301 (AISI 304). Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. Optionally without or with keyway DIN 6885-1, on both sides. - [Spur gear made of stainless steel 1.4305 with hub module 1 11 teeth tooth width 10mm outside diameter 13mm SKU: 21499011](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-11-teeth-tooth-width-10mm-outside-diameter-13mm-sku-21499011/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 10 teeth tooth width 10mm outside diameter 12mm SKU: 21499010](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-10-teeth-tooth-width-10mm-outside-diameter-12mm-sku-21499010/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 60 teeth tooth width 15mm outside diameter 62mm teeth induction hardened SKU: 21488160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-60-teeth-tooth-width-15mm-outside-diameter-62mm-teeth-induction-hardened-sku-21488160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 50 teeth tooth width 15mm outside diameter 52mm teeth induction hardened SKU: 21488150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-50-teeth-tooth-width-15mm-outside-diameter-52mm-teeth-induction-hardened-sku-21488150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 40 teeth tooth width 15mm outside diameter 42mm teeth induction hardened SKU: 21488140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-40-teeth-tooth-width-15mm-outside-diameter-42mm-teeth-induction-hardened-sku-21488140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 36 teeth tooth width 15mm outside diameter 38mm teeth induction hardened SKU: 21488136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-36-teeth-tooth-width-15mm-outside-diameter-38mm-teeth-induction-hardened-sku-21488136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 32 teeth tooth width 15mm outside diameter 34mm teeth induction hardened SKU: 21488132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-32-teeth-tooth-width-15mm-outside-diameter-34mm-teeth-induction-hardened-sku-21488132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 30 teeth tooth width 15mm outside diameter 32mm teeth induction hardened SKU: 21488130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-30-teeth-tooth-width-15mm-outside-diameter-32mm-teeth-induction-hardened-sku-21488130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 28 teeth tooth width 15mm outside diameter 30mm teeth induction hardened SKU: 21488128](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-28-teeth-tooth-width-15mm-outside-diameter-30mm-teeth-induction-hardened-sku-21488128/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 26 teeth tooth width 15mm outside diameter 28mm teeth induction hardened SKU: 21488126](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-26-teeth-tooth-width-15mm-outside-diameter-28mm-teeth-induction-hardened-sku-21488126/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 25 teeth tooth width 15mm outside diameter 27mm teeth induction hardened SKU: 21488125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-25-teeth-tooth-width-15mm-outside-diameter-27mm-teeth-induction-hardened-sku-21488125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 24 teeth tooth width 15mm outside diameter 26mm teeth induction hardened SKU: 21488124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-24-teeth-tooth-width-15mm-outside-diameter-26mm-teeth-induction-hardened-sku-21488124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 20 teeth tooth width 15mm outside diameter 22mm teeth induction hardened SKU: 21488120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-20-teeth-tooth-width-15mm-outside-diameter-22mm-teeth-induction-hardened-sku-21488120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 18 teeth tooth width 15mm outside diameter 20mm teeth induction hardened SKU: 21488118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-18-teeth-tooth-width-15mm-outside-diameter-20mm-teeth-induction-hardened-sku-21488118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 17 teeth tooth width 15mm outside diameter 19mm teeth induction hardened SKU: 21488117](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-17-teeth-tooth-width-15mm-outside-diameter-19mm-teeth-induction-hardened-sku-21488117/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 16 teeth tooth width 15mm outside diameter 18mm teeth induction hardened SKU: 21488116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-16-teeth-tooth-width-15mm-outside-diameter-18mm-teeth-induction-hardened-sku-21488116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 15 teeth tooth width 15mm outside diameter 17mm teeth induction hardened SKU: 21488115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-15-teeth-tooth-width-15mm-outside-diameter-17mm-teeth-induction-hardened-sku-21488115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 14 teeth tooth width 15mm outside diameter 16mm teeth induction hardened SKU: 21488114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-14-teeth-tooth-width-15mm-outside-diameter-16mm-teeth-induction-hardened-sku-21488114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 13 teeth tooth width 15mm outside diameter 15mm teeth induction hardened SKU: 21488113](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-13-teeth-tooth-width-15mm-outside-diameter-15mm-teeth-induction-hardened-sku-21488113/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1 12 teeth tooth width 15mm outside diameter 14mm teeth induction hardened SKU: 21488112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-12-teeth-tooth-width-15mm-outside-diameter-14mm-teeth-induction-hardened-sku-21488112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 0.7 120 teeth tooth width 5mm outside diameter 85.4mm SKU: 21212000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-0-7-120-teeth-tooth-width-5mm-outside-diameter-85-4mm-sku-21212000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 0.7 114 teeth tooth width 5mm outside diameter 81.2mm SKU: 21211400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-0-7-114-teeth-tooth-width-5mm-outside-diameter-81-2mm-sku-21211400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 100 teeth tooth width 5mm outside diameter 71.4mm SKU: 21210000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-100-teeth-tooth-width-5mm-outside-diameter-71-4mm-sku-21210000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 96 teeth tooth width 5mm outside diameter 68.6mm SKU: 21209600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-96-teeth-tooth-width-5mm-outside-diameter-68-6mm-sku-21209600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 90 teeth tooth width 5mm outside diameter 64.4mm SKU: 21209000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-90-teeth-tooth-width-5mm-outside-diameter-64-4mm-sku-21209000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 85 teeth tooth width 5mm outside diameter 60.9mm SKU: 21208500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-85-teeth-tooth-width-5mm-outside-diameter-60-9mm-sku-21208500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 80 teeth tooth width 5mm outside diameter 57.4mm SKU: 21208000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-80-teeth-tooth-width-5mm-outside-diameter-57-4mm-sku-21208000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 75 teeth tooth width 5mm outside diameter 53.9mm SKU: 21207500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-75-teeth-tooth-width-5mm-outside-diameter-53-9mm-sku-21207500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 72 teeth tooth width 5mm outside diameter 51.8mm SKU: 21207200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-72-teeth-tooth-width-5mm-outside-diameter-51-8mm-sku-21207200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 70 teeth tooth width 5mm outside diameter 50.4mm SKU: 21207000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-70-teeth-tooth-width-5mm-outside-diameter-50-4mm-sku-21207000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 65 teeth tooth width 5mm outside diameter 46.9mm SKU: 21206500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-65-teeth-tooth-width-5mm-outside-diameter-46-9mm-sku-21206500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 64 teeth tooth width 5mm outside diameter 46.2mm SKU: 21206400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-64-teeth-tooth-width-5mm-outside-diameter-46-2mm-sku-21206400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 60 teeth tooth width 5mm outside diameter 43.4mm SKU: 21206000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-60-teeth-tooth-width-5mm-outside-diameter-43-4mm-sku-21206000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 56 teeth tooth width 5mm outside diameter 40.6mm SKU: 21205600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-56-teeth-tooth-width-5mm-outside-diameter-40-6mm-sku-21205600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 55 teeth tooth width 5mm outside diameter 39.9mm SKU: 21205500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-55-teeth-tooth-width-5mm-outside-diameter-39-9mm-sku-21205500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 54 teeth tooth width 5mm outside diameter 39.2mm SKU: 21205400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-54-teeth-tooth-width-5mm-outside-diameter-39-2mm-sku-21205400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 52 teeth tooth width 5mm outside diameter 37.8mm SKU: 21205200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-52-teeth-tooth-width-5mm-outside-diameter-37-8mm-sku-21205200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 50 teeth tooth width 5mm outside diameter 36.4mm SKU: 21205000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-50-teeth-tooth-width-5mm-outside-diameter-36-4mm-sku-21205000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 48 teeth tooth width 5mm outside diameter 35mm SKU: 21204800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-48-teeth-tooth-width-5mm-outside-diameter-35mm-sku-21204800/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 45 teeth tooth width 5mm outside diameter 32.9mm SKU: 21204500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-45-teeth-tooth-width-5mm-outside-diameter-32-9mm-sku-21204500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 42 teeth tooth width 5mm outside diameter 30.8mm SKU: 21204200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-42-teeth-tooth-width-5mm-outside-diameter-30-8mm-sku-21204200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 40 teeth tooth width 5mm outside diameter 29.4mm SKU: 21204000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-40-teeth-tooth-width-5mm-outside-diameter-29-4mm-sku-21204000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 38 teeth tooth width 5mm outside diameter 28mm SKU: 21203800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-38-teeth-tooth-width-5mm-outside-diameter-28mm-sku-21203800/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 36 teeth tooth width 5mm outside diameter 26.6mm SKU: 21203600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-36-teeth-tooth-width-5mm-outside-diameter-26-6mm-sku-21203600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 35 teeth tooth width 5mm outside diameter 25.9mm SKU: 21203500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-35-teeth-tooth-width-5mm-outside-diameter-25-9mm-sku-21203500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 32 teeth tooth width 5mm outside diameter 23.8mm SKU: 21203200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-32-teeth-tooth-width-5mm-outside-diameter-23-8mm-sku-21203200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 30 teeth tooth width 5mm outside diameter 22.4mm SKU: 21203000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-30-teeth-tooth-width-5mm-outside-diameter-22-4mm-sku-21203000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 28 teeth tooth width 5mm outside diameter 21mm SKU: 21202800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-28-teeth-tooth-width-5mm-outside-diameter-21mm-sku-21202800/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 27 teeth tooth width 5mm outside diameter 20.3mm SKU: 21202700](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-27-teeth-tooth-width-5mm-outside-diameter-20-3mm-sku-21202700/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 26 teeth tooth width 5mm outside diameter 19.6mm SKU: 21202600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-26-teeth-tooth-width-5mm-outside-diameter-19-6mm-sku-21202600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 25 teeth tooth width 5mm outside diameter 18.9mm SKU: 21202500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-25-teeth-tooth-width-5mm-outside-diameter-18-9mm-sku-21202500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 24 teeth tooth width 5mm outside diameter 18.2mm SKU: 21202400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-24-teeth-tooth-width-5mm-outside-diameter-18-2mm-sku-21202400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 23 teeth tooth width 5mm outside diameter 17.5mm SKU: 21202300](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-23-teeth-tooth-width-5mm-outside-diameter-17-5mm-sku-21202300/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 22 teeth tooth width 5mm outside diameter 16.8mm SKU: 21202200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-22-teeth-tooth-width-5mm-outside-diameter-16-8mm-sku-21202200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 21 teeth tooth width 5mm outside diameter 16.1mm SKU: 21202100](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-21-teeth-tooth-width-5mm-outside-diameter-16-1mm-sku-21202100/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 20 teeth tooth width 5mm outside diameter 15.4mm SKU: 21202000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-20-teeth-tooth-width-5mm-outside-diameter-15-4mm-sku-21202000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 19 teeth tooth width 5mm outside diameter 14.7mm SKU: 21201900](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-19-teeth-tooth-width-5mm-outside-diameter-14-7mm-sku-21201900/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 18 teeth tooth width 5mm outside diameter 14mm SKU: 21201800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-18-teeth-tooth-width-5mm-outside-diameter-14mm-sku-21201800/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 17 teeth tooth width 5mm outside diameter 13.3mm SKU: 21201700](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-17-teeth-tooth-width-5mm-outside-diameter-13-3mm-sku-21201700/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 16 teeth tooth width 5mm outside diameter 12.6mm SKU: 21201600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-16-teeth-tooth-width-5mm-outside-diameter-12-6mm-sku-21201600/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 15 teeth tooth width 5mm outside diameter 11.9mm SKU: 21201500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-15-teeth-tooth-width-5mm-outside-diameter-11-9mm-sku-21201500/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 14 teeth tooth width 5mm outside diameter 11.2mm SKU: 21201400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-14-teeth-tooth-width-5mm-outside-diameter-11-2mm-sku-21201400/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 13 teeth tooth width 5mm outside diameter 10.5mm SKU: 21201300](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-13-teeth-tooth-width-5mm-outside-diameter-10-5mm-sku-21201300/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 12 teeth tooth width 5mm outside diameter 9.8mm SKU: 21201200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-12-teeth-tooth-width-5mm-outside-diameter-9-8mm-sku-21201200/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.7 10 teeth tooth width 5mm outside diameter 8.4mm SKU: 21201000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-7-10-teeth-tooth-width-5mm-outside-diameter-8-4mm-sku-21201000/): With Hub, Milled, Straight Teeth Material: 11SMnPb30+SH (1.0718). Gears marked with ** are from C45. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 120 teeth tooth width 4mm outside diameter 61mm SKU: 21112000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-120-teeth-tooth-width-4mm-outside-diameter-61mm-sku-21112000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 114 teeth tooth width 4mm outside diameter 58mm SKU: 21111400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-114-teeth-tooth-width-4mm-outside-diameter-58mm-sku-21111400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 100 teeth tooth width 4mm outside diameter 51mm SKU: 21110000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-100-teeth-tooth-width-4mm-outside-diameter-51mm-sku-21110000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 96 teeth tooth width 4mm outside diameter 49mm SKU: 21109600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-96-teeth-tooth-width-4mm-outside-diameter-49mm-sku-21109600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 90 teeth tooth width 4mm outside diameter 46mm SKU: 21109000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-90-teeth-tooth-width-4mm-outside-diameter-46mm-sku-21109000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 85 teeth tooth width 4mm outside diameter 43,5mm SKU: 21108500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-85-teeth-tooth-width-4mm-outside-diameter-435mm-sku-21108500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 80 teeth tooth width 4mm outside diameter 41mm SKU: 21108000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-80-teeth-tooth-width-4mm-outside-diameter-41mm-sku-21108000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 75 teeth tooth width 4mm outside diameter 38.5mm SKU: 21107500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-75-teeth-tooth-width-4mm-outside-diameter-38-5mm-sku-21107500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 72 teeth tooth width 4mm outside diameter 37mm SKU: 21107200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-72-teeth-tooth-width-4mm-outside-diameter-37mm-sku-21107200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 70 teeth tooth width 4mm outside diameter 36mm SKU: 21107000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-70-teeth-tooth-width-4mm-outside-diameter-36mm-sku-21107000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 65 teeth tooth width 4mm outside diameter 33.5mm SKU: 21106500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-65-teeth-tooth-width-4mm-outside-diameter-33-5mm-sku-21106500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 64 teeth tooth width 4mm outside diameter 33mm SKU: 21106400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-64-teeth-tooth-width-4mm-outside-diameter-33mm-sku-21106400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 60 teeth tooth width 4mm outside diameter 31mm SKU: 21106000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-60-teeth-tooth-width-4mm-outside-diameter-31mm-sku-21106000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 56 teeth tooth width 4mm outside diameter 29mm SKU: 21105600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-56-teeth-tooth-width-4mm-outside-diameter-29mm-sku-21105600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 55 teeth tooth width 4mm outside diameter 28.5mm SKU: 21105500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-55-teeth-tooth-width-4mm-outside-diameter-28-5mm-sku-21105500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 54 teeth tooth width 4mm outside diameter 28mm SKU: 21105400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-54-teeth-tooth-width-4mm-outside-diameter-28mm-sku-21105400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 52 teeth tooth width 4mm outside diameter 27mm SKU: 21105200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-52-teeth-tooth-width-4mm-outside-diameter-27mm-sku-21105200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 50 teeth tooth width 4mm outside diameter 26mm SKU: 21105000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-50-teeth-tooth-width-4mm-outside-diameter-26mm-sku-21105000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 48 teeth tooth width 4mm outside diameter 25mm SKU: 21104800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-48-teeth-tooth-width-4mm-outside-diameter-25mm-sku-21104800/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 45 teeth tooth width 4mm outside diameter 23.5mm SKU: 21104500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-45-teeth-tooth-width-4mm-outside-diameter-23-5mm-sku-21104500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 42 teeth tooth width 4mm outside diameter 22mm SKU: 21104200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-42-teeth-tooth-width-4mm-outside-diameter-22mm-sku-21104200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 40 teeth tooth width 4mm outside diameter 21mm SKU: 21104000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-40-teeth-tooth-width-4mm-outside-diameter-21mm-sku-21104000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 38 teeth tooth width 4mm outside diameter 20mm SKU: 21103800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-38-teeth-tooth-width-4mm-outside-diameter-20mm-sku-21103800/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 36 teeth tooth width 4mm outside diameter 19mm SKU: 21103600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-36-teeth-tooth-width-4mm-outside-diameter-19mm-sku-21103600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 35 teeth tooth width 4mm outside diameter 18.5mm SKU: 21103500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-35-teeth-tooth-width-4mm-outside-diameter-18-5mm-sku-21103500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 32 teeth tooth width 4mm outside diameter 17mm SKU: 21103200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-32-teeth-tooth-width-4mm-outside-diameter-17mm-sku-21103200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 30 teeth tooth width 4mm outside diameter 16mm SKU: 21103000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-30-teeth-tooth-width-4mm-outside-diameter-16mm-sku-21103000/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 28 teeth tooth width 4mm outside diameter 15mm SKU: 21102800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-28-teeth-tooth-width-4mm-outside-diameter-15mm-sku-21102800/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 27 teeth tooth width 4mm outside diameter 14.5mm SKU: 21102700](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-27-teeth-tooth-width-4mm-outside-diameter-14-5mm-sku-21102700/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 26 teeth tooth width 4mm outside diameter 14mm SKU: 21102600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-26-teeth-tooth-width-4mm-outside-diameter-14mm-sku-21102600/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 25 teeth tooth width 4mm outside diameter 13.5mm SKU: 21102500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-25-teeth-tooth-width-4mm-outside-diameter-13-5mm-sku-21102500/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 24 teeth tooth width 4mm outside diameter 13mm SKU: 21102400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-24-teeth-tooth-width-4mm-outside-diameter-13mm-sku-21102400/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 23 teeth tooth width 4mm outside diameter 12.5mm SKU: 21102300](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-23-teeth-tooth-width-4mm-outside-diameter-12-5mm-sku-21102300/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 22 teeth tooth width 4mm outside diameter 126mm SKU: 21102200](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-22-teeth-tooth-width-4mm-outside-diameter-126mm-sku-21102200/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of steel 11SMnPb30 with hub module 0.5 21 teeth tooth width 4mm outside diameter 11.5mm SKU: 21102100](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-0-5-21-teeth-tooth-width-4mm-outside-diameter-11-5mm-sku-21102100/): With Hub, Milled, Straight TeethMaterial: 11SMnPb30+SH (1.0718).Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 25mm outer diameter 47mm stainless steel == Initial lubrication required before use == SKU: 63399225](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-25mm-outer-diameter-47mm-stainless-steel-initial-lubrication-required-before-use-sku-63399225/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 22mm outer diameter 42mm stainless steel == Initial lubrication required before use == SKU: 63399222](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-22mm-outer-diameter-42mm-stainless-steel-initial-lubrication-required-before-use-sku-63399222/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 20mm outer diameter 40mm stainless steel == Initial lubrication required before use == SKU: 63399220](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-20mm-outer-diameter-40mm-stainless-steel-initial-lubrication-required-before-use-sku-63399220/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 18mm outer diameter 35mm stainless steel == Initial lubrication required before use == SKU: 63399218](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-18mm-outer-diameter-35mm-stainless-steel-initial-lubrication-required-before-use-sku-63399218/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 16mm outer diameter 32mm stainless steel == Initial lubrication required before use == SKU: 63399216](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-16mm-outer-diameter-32mm-stainless-steel-initial-lubrication-required-before-use-sku-63399216/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 14mm outer diameter 28mm stainless steel == Initial lubrication required before use == SKU: 63399214](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-14mm-outer-diameter-28mm-stainless-steel-initial-lubrication-required-before-use-sku-63399214/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 12mm outer diameter 26mm stainless steel == Initial lubrication required before use == SKU: 63399212](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-12mm-outer-diameter-26mm-stainless-steel-initial-lubrication-required-before-use-sku-63399212/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 10mm outer diameter 22mm stainless steel == Initial lubrication required before use == SKU: 63399210](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-10mm-outer-diameter-22mm-stainless-steel-initial-lubrication-required-before-use-sku-63399210/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 8mm outer diameter 19mm stainless steel == Initial lubrication required before use == SKU: 63399208](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-8mm-outer-diameter-19mm-stainless-steel-initial-lubrication-required-before-use-sku-63399208/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 6mm outer diameter 16mm stainless steel == Initial lubrication required before use == SKU: 63399206](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-6mm-outer-diameter-16mm-stainless-steel-initial-lubrication-required-before-use-sku-63399206/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 5mm outer diameter 13mm stainless steel == Initial lubrication required before use == SKU: 63399205](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-5mm-outer-diameter-13mm-stainless-steel-initial-lubrication-required-before-use-sku-63399205/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 40mm outer diameter 87mm stainless steel SKU: 63399140](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-40mm-outer-diameter-87mm-stainless-steel-sku-63399140/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 35mm outer diameter 78mm stainless steel SKU: 63399135](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-35mm-outer-diameter-78mm-stainless-steel-sku-63399135/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 30mm outer diameter 66mm stainless steel SKU: 63399130](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-30mm-outer-diameter-66mm-stainless-steel-sku-63399130/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 25mm outer diameter 56mm stainless steel SKU: 63399125](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-25mm-outer-diameter-56mm-stainless-steel-sku-63399125/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 22mm outer diameter 50mm stainless steel SKU: 63399122](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-22mm-outer-diameter-50mm-stainless-steel-sku-63399122/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 20mm outer diameter 46mm stainless steel SKU: 63399120](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-20mm-outer-diameter-46mm-stainless-steel-sku-63399120/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 18mm outer diameter 42mm stainless steel SKU: 63399118](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-18mm-outer-diameter-42mm-stainless-steel-sku-63399118/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 16mm outer diameter 38mm stainless steel SKU: 63399116](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-16mm-outer-diameter-38mm-stainless-steel-sku-63399116/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 14mm outer diameter 34mm stainless steel SKU: 63399114](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-14mm-outer-diameter-34mm-stainless-steel-sku-63399114/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 12mm outer diameter 30mm stainless steel SKU: 63399112](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-12mm-outer-diameter-30mm-stainless-steel-sku-63399112/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 10mm outer diameter 26mm stainless steel SKU: 63399110](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-10mm-outer-diameter-26mm-stainless-steel-sku-63399110/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 8mm outer diameter 22mm stainless steel SKU: 63399108](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-8mm-outer-diameter-22mm-stainless-steel-sku-63399108/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 6mm outer diameter 18mm stainless steel SKU: 63399106](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-6mm-outer-diameter-18mm-stainless-steel-sku-63399106/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type SD with outer ring maintenance-free bore 5mm outer diameter 16mm stainless steel SKU: 63399105](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-sd-with-outer-ring-maintenance-free-bore-5mm-outer-diameter-16mm-stainless-steel-sku-63399105/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 40mm outer diameter 87mm stainless steel == Initial lubrication required before use == SKU: 63399040](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-40mm-outer-diameter-87mm-stainless-steel-initial-lubrication-required-before-use-sku-63399040/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 35mm outer diameter 78mm stainless steel == Initial lubrication required before use == SKU: 63399035](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-35mm-outer-diameter-78mm-stainless-steel-initial-lubrication-required-before-use-sku-63399035/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 30mm outer diameter 66mm stainless steel == Initial lubrication required before use == SKU: 63399030](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-30mm-outer-diameter-66mm-stainless-steel-initial-lubrication-required-before-use-sku-63399030/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 25mm outer diameter 56mm stainless steel == Initial lubrication required before use == SKU: 63399025](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-25mm-outer-diameter-56mm-stainless-steel-initial-lubrication-required-before-use-sku-63399025/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 22mm outer diameter 50mm stainless steel == Initial lubrication required before use == SKU: 63399022](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-22mm-outer-diameter-50mm-stainless-steel-initial-lubrication-required-before-use-sku-63399022/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 20mm outer diameter 46mm stainless steel == Initial lubrication required before use == SKU: 63399020](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-20mm-outer-diameter-46mm-stainless-steel-initial-lubrication-required-before-use-sku-63399020/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 18mm outer diameter 42mm stainless steel == Initial lubrication required before use == SKU: 63399018](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-18mm-outer-diameter-42mm-stainless-steel-initial-lubrication-required-before-use-sku-63399018/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 16mm outer diameter 38mm stainless steel == Initial lubrication required before use == SKU: 63399016](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-16mm-outer-diameter-38mm-stainless-steel-initial-lubrication-required-before-use-sku-63399016/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 14mm outer diameter 34mm stainless steel == Initial lubrication required before use == SKU: 63399014](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-14mm-outer-diameter-34mm-stainless-steel-initial-lubrication-required-before-use-sku-63399014/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 12mm outer diameter 30mm stainless steel == Initial lubrication required before use == SKU: 63399012](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-12mm-outer-diameter-30mm-stainless-steel-initial-lubrication-required-before-use-sku-63399012/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 10mm outer diameter 26mm stainless steel == Initial lubrication required before use == SKU: 63399010](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-10mm-outer-diameter-26mm-stainless-steel-initial-lubrication-required-before-use-sku-63399010/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 8mm outer diameter 22mm stainless steel == Initial lubrication required before use == SKU: 63399008](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-8mm-outer-diameter-22mm-stainless-steel-initial-lubrication-required-before-use-sku-63399008/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 6mm outer diameter 18mm stainless steel == Initial lubrication required before use == SKU: 63399006](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-6mm-outer-diameter-18mm-stainless-steel-initial-lubrication-required-before-use-sku-63399006/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Spherical bearing DIN ISO 12240-1-K type S with outer ring relubricateable bore 5mm outer diameter 16mm stainless steel == Initial lubrication required before use == SKU: 63399005](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-s-with-outer-ring-relubricateable-bore-5mm-outer-diameter-16mm-stainless-steel-initial-lubrication-required-before-use-sku-63399005/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1. Outer ring stainless steel 1.4305 (AISI 303).Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated.Initial lubrication required before useFor high sliding speed up to 60 m/min.With outer ring (bigger outer diameter than version G or G..D). - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 80mm outer diameter 120mm SKU: 63378000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-80mm-outer-diameter-120mm-sku-63378000/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 70mm outer diameter 105mm SKU: 63377000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-70mm-outer-diameter-105mm-sku-63377000/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 60mm outer diameter 90mm SKU: 63376000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-60mm-outer-diameter-90mm-sku-63376000/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 50mm outer diameter 75mm SKU: 63375000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-50mm-outer-diameter-75mm-sku-63375000/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 45mm outer diameter 68mm SKU: 63374500](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-45mm-outer-diameter-68mm-sku-63374500/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 40mm outer diameter 62mm SKU: 63374000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-40mm-outer-diameter-62mm-sku-63374000/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 35mm outer diameter 55mm SKU: 63373500](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-35mm-outer-diameter-55mm-sku-63373500/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 30mm outer diameter 47mm SKU: 63373000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-30mm-outer-diameter-47mm-sku-63373000/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 25mm outer diameter 42mm SKU: 63372500](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-25mm-outer-diameter-42mm-sku-63372500/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 20mm outer diameter 35mm SKU: 63372000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-20mm-outer-diameter-35mm-sku-63372000/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 17mm outer diameter 30mm SKU: 63371700](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-17mm-outer-diameter-30mm-sku-63371700/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 16mm outer diameter 30mm SKU: 63371600](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-16mm-outer-diameter-30mm-sku-63371600/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 15mm outer diameter 26mm SKU: 63371500](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-15mm-outer-diameter-26mm-sku-63371500/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 12mm outer diameter 22mm SKU: 63371200](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-12mm-outer-diameter-22mm-sku-63371200/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 10mm outer diameter 19mm SKU: 63371000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-10mm-outer-diameter-19mm-sku-63371000/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 8mm outer diameter 16mm SKU: 63370800](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-8mm-outer-diameter-16mm-sku-63370800/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 6mm outer diameter 14mm SKU: 63370600](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-6mm-outer-diameter-14mm-sku-63370600/): Material: Inner ring bearing steel 100Cr6, hardened, ground, polished and hard chromed.Bearing shell from bearing steel, 100Cr6 with PTFE-lining.From size 35 in 2RS-version (sealed on both sides).DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 80mm outer diameter 120mm == Initial lubrication required before use == SKU: 63368000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-80mm-outer-diameter-120mm-initial-lubrication-required-before-use-sku-63368000/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 70mm outer diameter 105mm == Initial lubrication required before use == SKU: 63367000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-70mm-outer-diameter-105mm-initial-lubrication-required-before-use-sku-63367000/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 60mm outer diameter 90mm == Initial lubrication required before use == SKU: 63366000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-60mm-outer-diameter-90mm-initial-lubrication-required-before-use-sku-63366000/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 50mm outer diameter 75mm == Initial lubrication required before use == SKU: 63365000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-50mm-outer-diameter-75mm-initial-lubrication-required-before-use-sku-63365000/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 45mm outer diameter 68mm == Initial lubrication required before use == SKU: 63364500](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-45mm-outer-diameter-68mm-initial-lubrication-required-before-use-sku-63364500/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 40mm outer diameter 62mm == Initial lubrication required before use == SKU: 63364000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-40mm-outer-diameter-62mm-initial-lubrication-required-before-use-sku-63364000/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 35mm outer diameter 55mm == Initial lubrication required before use == SKU: 63363500](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-35mm-outer-diameter-55mm-initial-lubrication-required-before-use-sku-63363500/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 30mm outer diameter 47mm == Initial lubrication required before use == SKU: 63363000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-30mm-outer-diameter-47mm-initial-lubrication-required-before-use-sku-63363000/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 25mm outer diameter 42mm == Initial lubrication required before use == SKU: 63362500](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-25mm-outer-diameter-42mm-initial-lubrication-required-before-use-sku-63362500/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 20mm outer diameter 35mm == Initial lubrication required before use == SKU: 63362000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-20mm-outer-diameter-35mm-initial-lubrication-required-before-use-sku-63362000/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 17mm outer diameter 30mm == Initial lubrication required before use == SKU: 63361700](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-17mm-outer-diameter-30mm-initial-lubrication-required-before-use-sku-63361700/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 16mm outer diameter 30mm == Initial lubrication required before use == SKU: 63361600](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-16mm-outer-diameter-30mm-initial-lubrication-required-before-use-sku-63361600/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO relubricateable bore 15mm outer diameter 26mm == Initial lubrication required before use == SKU: 63361500](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-relubricateable-bore-15mm-outer-diameter-26mm-initial-lubrication-required-before-use-sku-63361500/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO bore 12mm outer diameter 22mm == Initial lubrication required before use == SKU: 63361200](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-bore-12mm-outer-diameter-22mm-initial-lubrication-required-before-use-sku-63361200/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO bore 10mm outer diameter 19mm == Initial lubrication required before use == SKU: 63361000](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-bore-10mm-outer-diameter-19mm-initial-lubrication-required-before-use-sku-63361000/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO bore 8mm outer diameter 16mm == Initial lubrication required before use == SKU: 63360800](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-bore-8mm-outer-diameter-16mm-initial-lubrication-required-before-use-sku-63360800/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...DO bore 6mm outer diameter 14mm == Initial lubrication required before use == SKU: 63360600](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-do-bore-6mm-outer-diameter-14mm-initial-lubrication-required-before-use-sku-63360600/): Material: Inner ring and bearing shell from bearing steel 100Cr6, hardened, ground and phosphated.Treated with molybdenum disulfide.Bearing shell (outer ring) cut.Dimensions according to DIN ISO 12240-1 (DIN 648) series E (slim version).Re-lubricateable (from size 15 with lubrication hole).Initial lubrication before use is required.Suitable for high, alternating loads.For high sliding speed up to 60 m/min. - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 40mm outer diameter 72mm SKU: 63334000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-40mm-outer-diameter-72mm-sku-63334000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 35mm outer diameter 62mm SKU: 63333500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-35mm-outer-diameter-62mm-sku-63333500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 30mm outer diameter 55mm SKU: 63333000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-30mm-outer-diameter-55mm-sku-63333000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 25mm outer diameter 47mm SKU: 63332500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-25mm-outer-diameter-47mm-sku-63332500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 22mm outer diameter 42mm SKU: 63332200](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-22mm-outer-diameter-42mm-sku-63332200/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 20mm outer diameter 40mm SKU: 63332000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-20mm-outer-diameter-40mm-sku-63332000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 18mm outer diameter 35mm SKU: 63331800](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-18mm-outer-diameter-35mm-sku-63331800/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 16mm outer diameter 32mm SKU: 63331600](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-16mm-outer-diameter-32mm-sku-63331600/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 14mm outer diameter 28mm SKU: 63331400](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-14mm-outer-diameter-28mm-sku-63331400/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 12mm outer diameter 26mm SKU: 63331200](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-12mm-outer-diameter-26mm-sku-63331200/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 10mm outer diameter 22mm SKU: 63331000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-10mm-outer-diameter-22mm-sku-63331000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 8mm outer diameter 19mm SKU: 63330800](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-8mm-outer-diameter-19mm-sku-63330800/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 6mm outer diameter 16mm SKU: 63330600](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-6mm-outer-diameter-16mm-sku-63330600/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 5mm outer diameter 13mm SKU: 63330500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-5mm-outer-diameter-13mm-sku-63330500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell steel 9SMnPb28K, zinc plated, with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 40mm outer diameter 72mm == Initial lubrication required before use == SKU: 63324000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-40mm-outer-diameter-72mm-initial-lubrication-required-before-use-sku-63324000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 35mm outer diameter 62mm == Initial lubrication required before use == SKU: 63323500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-35mm-outer-diameter-62mm-initial-lubrication-required-before-use-sku-63323500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 30mm outer diameter 55mm == Initial lubrication required before use == SKU: 63323000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-30mm-outer-diameter-55mm-initial-lubrication-required-before-use-sku-63323000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 25mm outer diameter 47mm == Initial lubrication required before use == SKU: 63322500](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-25mm-outer-diameter-47mm-initial-lubrication-required-before-use-sku-63322500/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 22mm outer diameter 42mm == Initial lubrication required before use == SKU: 63322200](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-22mm-outer-diameter-42mm-initial-lubrication-required-before-use-sku-63322200/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 20mm outer diameter 40mm == Initial lubrication required before use == SKU: 63322000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-20mm-outer-diameter-40mm-initial-lubrication-required-before-use-sku-63322000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 18mm outer diameter 35mm == Initial lubrication required before use == SKU: 63321800](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-18mm-outer-diameter-35mm-initial-lubrication-required-before-use-sku-63321800/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 16mm outer diameter 32mm == Initial lubrication required before use == SKU: 63321600](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-16mm-outer-diameter-32mm-initial-lubrication-required-before-use-sku-63321600/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 14mm outer diameter 28mm == Initial lubrication required before use == SKU: 63321400](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-14mm-outer-diameter-28mm-initial-lubrication-required-before-use-sku-63321400/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 12mm outer diameter 26mm == Initial lubrication required before use == SKU: 63321200](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-12mm-outer-diameter-26mm-initial-lubrication-required-before-use-sku-63321200/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 10mm outer diameter 22mm == Initial lubrication required before use == SKU: 63321000](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-10mm-outer-diameter-22mm-initial-lubrication-required-before-use-sku-63321000/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 8mm outer diameter 19mm == Initial lubrication required before use == SKU: 63320800](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-8mm-outer-diameter-19mm-initial-lubrication-required-before-use-sku-63320800/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 6mm outer diameter 16mm == Initial lubrication required before use == SKU: 63320600](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-6mm-outer-diameter-16mm-initial-lubrication-required-before-use-sku-63320600/): Material: Inner ring bearing steel 100Cr6, hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size size 6mm with lubrication hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spur gear made of steel C45 with hub module 1.5 40 teeth tooth width 17mm outside diameter 63mm teeth induction hardened SKU: 21888140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-teeth-induction-hardened-sku-21888140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 36 teeth tooth width 17mm outside diameter 57mm teeth induction hardened SKU: 21888136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-teeth-induction-hardened-sku-21888136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 30 teeth tooth width 17mm outside diameter 48mm teeth induction hardened SKU: 21888130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-teeth-induction-hardened-sku-21888130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm teeth induction hardened SKU: 21888125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-teeth-induction-hardened-sku-21888125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 24 teeth tooth width 17mm outside diameter 39mm teeth induction hardened SKU: 21888124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-24-teeth-tooth-width-17mm-outside-diameter-39mm-teeth-induction-hardened-sku-21888124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 22 teeth tooth width 17mm outside diameter 36mm teeth induction hardened SKU: 21888122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-22-teeth-tooth-width-17mm-outside-diameter-36mm-teeth-induction-hardened-sku-21888122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 20 teeth tooth width 17mm outside diameter 33mm teeth induction hardened SKU: 21888120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-20-teeth-tooth-width-17mm-outside-diameter-33mm-teeth-induction-hardened-sku-21888120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 18 teeth tooth width 17mm outside diameter 30mm teeth induction hardened SKU: 21888118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-18-teeth-tooth-width-17mm-outside-diameter-30mm-teeth-induction-hardened-sku-21888118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 16 teeth tooth width 17mm outside diameter 27mm teeth induction hardened SKU: 21888116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-16-teeth-tooth-width-17mm-outside-diameter-27mm-teeth-induction-hardened-sku-21888116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 15 teeth tooth width 17mm outside diameter 25.5mm teeth induction hardened SKU: 21888115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-15-teeth-tooth-width-17mm-outside-diameter-25-5mm-teeth-induction-hardened-sku-21888115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 14 teeth tooth width 17mm outside diameter 24mm teeth induction hardened SKU: 21888114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-14-teeth-tooth-width-17mm-outside-diameter-24mm-teeth-induction-hardened-sku-21888114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 12 teeth tooth width 17mm outside diameter 21mm teeth induction hardened SKU: 21888112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-12-teeth-tooth-width-17mm-outside-diameter-21mm-teeth-induction-hardened-sku-21888112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21855280](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21855280/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21855260](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21855260/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 56 teeth tooth width 17mm outside diameter 87mm SKU: 21855256](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-56-teeth-tooth-width-17mm-outside-diameter-87mm-sku-21855256/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21855250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21855250/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21855245](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21855245/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21855240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21855240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21855236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21855236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21855232](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21855232/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21855230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21855230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21855225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21855225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 21855120](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-21855120/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 100 teeth tooth width 17mm outside diameter 153mm SKU: 21855100](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-100-teeth-tooth-width-17mm-outside-diameter-153mm-sku-21855100/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 90 teeth tooth width 17mm outside diameter 138mm SKU: 21855090](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-90-teeth-tooth-width-17mm-outside-diameter-138mm-sku-21855090/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21855080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21855080/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 72 teeth tooth width 17mm outside diameter 111mm SKU: 21855072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-72-teeth-tooth-width-17mm-outside-diameter-111mm-sku-21855072/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 70 teeth tooth width 17mm outside diameter 108mm SKU: 21855070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-70-teeth-tooth-width-17mm-outside-diameter-108mm-sku-21855070/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 64 teeth tooth width 17mm outside diameter 99mm SKU: 21855064](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-64-teeth-tooth-width-17mm-outside-diameter-99mm-sku-21855064/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21855060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21855060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 56 teeth tooth width 17mm outside diameter 87mm SKU: 21855056](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-56-teeth-tooth-width-17mm-outside-diameter-87mm-sku-21855056/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21855050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21855050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 21855048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-21855048/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21855045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21855045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21855040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21855040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21855036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21855036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21855032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21855032/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21855030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21855030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21855025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21855025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear stainless steel 1.4305 with hub module 1 120 teeth tooth width 15mm outside diameter 122mm SKU: 21499320](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-120-teeth-tooth-width-15mm-outside-diameter-122mm-sku-21499320/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 110 teeth tooth width 15mm outside diameter 112mm SKU: 21499310](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-110-teeth-tooth-width-15mm-outside-diameter-112mm-sku-21499310/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 100 teeth tooth width 15mm outside diameter 102mm SKU: 21499300](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-100-teeth-tooth-width-15mm-outside-diameter-102mm-sku-21499300/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 90 teeth tooth width 15mm outside diameter 92mm SKU: 21499290](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-90-teeth-tooth-width-15mm-outside-diameter-92mm-sku-21499290/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 80 teeth tooth width 15mm outside diameter 82mm SKU: 21499280](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-80-teeth-tooth-width-15mm-outside-diameter-82mm-sku-21499280/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 75 teeth tooth width 15mm outside diameter 77mm SKU: 21499275](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-75-teeth-tooth-width-15mm-outside-diameter-77mm-sku-21499275/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 72 teeth tooth width 15mm outside diameter 74mm SKU: 21499272](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-72-teeth-tooth-width-15mm-outside-diameter-74mm-sku-21499272/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 70 teeth tooth width 15mm outside diameter 72mm SKU: 21499270](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-70-teeth-tooth-width-15mm-outside-diameter-72mm-sku-21499270/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 65 teeth tooth width 15mm outside diameter 67mm SKU: 21499265](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-65-teeth-tooth-width-15mm-outside-diameter-67mm-sku-21499265/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 60 teeth tooth width 15mm outside diameter 62mm SKU: 21499260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-60-teeth-tooth-width-15mm-outside-diameter-62mm-sku-21499260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 50 teeth tooth width 15mm outside diameter 52mm SKU: 21499250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-50-teeth-tooth-width-15mm-outside-diameter-52mm-sku-21499250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 48 teeth tooth width 15mm outside diameter 50mm SKU: 21499248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-48-teeth-tooth-width-15mm-outside-diameter-50mm-sku-21499248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 45 teeth tooth width 15mm outside diameter 47mm SKU: 21499245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-45-teeth-tooth-width-15mm-outside-diameter-47mm-sku-21499245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 40 teeth tooth width 15mm outside diameter 42mm SKU: 21499240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-40-teeth-tooth-width-15mm-outside-diameter-42mm-sku-21499240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 36 teeth tooth width 15mm outside diameter 38mm SKU: 21499236](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-36-teeth-tooth-width-15mm-outside-diameter-38mm-sku-21499236/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 35 teeth tooth width 15mm outside diameter 37mm SKU: 21499235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-35-teeth-tooth-width-15mm-outside-diameter-37mm-sku-21499235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 30 teeth tooth width 15mm outside diameter 32mm SKU: 21499230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-30-teeth-tooth-width-15mm-outside-diameter-32mm-sku-21499230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 28 teeth tooth width 15mm outside diameter 30mm SKU: 21499228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-28-teeth-tooth-width-15mm-outside-diameter-30mm-sku-21499228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 26 teeth tooth width 15mm outside diameter 28mm SKU: 21499226](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-26-teeth-tooth-width-15mm-outside-diameter-28mm-sku-21499226/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 25 teeth tooth width 15mm outside diameter 27mm SKU: 21499225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-25-teeth-tooth-width-15mm-outside-diameter-27mm-sku-21499225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 24 teeth tooth width 15mm outside diameter 26mm SKU: 21499224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-24-teeth-tooth-width-15mm-outside-diameter-26mm-sku-21499224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 20 teeth tooth width 15mm outside diameter 22mm SKU: 21499220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-20-teeth-tooth-width-15mm-outside-diameter-22mm-sku-21499220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 19 teeth tooth width 15mm outside diameter 21mm SKU: 21499219](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-19-teeth-tooth-width-15mm-outside-diameter-21mm-sku-21499219/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 18 teeth tooth width 15mm outside diameter 20mm SKU: 21499218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-18-teeth-tooth-width-15mm-outside-diameter-20mm-sku-21499218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 17 teeth tooth width 15mm outside diameter 19mm SKU: 21499217](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-17-teeth-tooth-width-15mm-outside-diameter-19mm-sku-21499217/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 16 teeth tooth width 15mm outside diameter 18mm SKU: 21499216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-16-teeth-tooth-width-15mm-outside-diameter-18mm-sku-21499216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 15 teeth tooth width 15mm outside diameter 17mm SKU: 21499215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-15-teeth-tooth-width-15mm-outside-diameter-17mm-sku-21499215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 14 teeth tooth width 15mm outside diameter 16mm SKU: 21499214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-14-teeth-tooth-width-15mm-outside-diameter-16mm-sku-21499214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 13 teeth tooth width 15mm outside diameter 15mm SKU: 21499213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-13-teeth-tooth-width-15mm-outside-diameter-15mm-sku-21499213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 12 teeth tooth width 15mm outside diameter 14mm SKU: 21499212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-12-teeth-tooth-width-15mm-outside-diameter-14mm-sku-21499212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1 10 teeth tooth width 15mm outside diameter 12mm SKU: 21499210](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-10-teeth-tooth-width-15mm-outside-diameter-12mm-sku-21499210/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 120 teeth tooth width 10mm outside diameter 122mm SKU: 21499120](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-120-teeth-tooth-width-10mm-outside-diameter-122mm-sku-21499120/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 100 teeth tooth width 10mm outside diameter 102mm SKU: 21499100](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-100-teeth-tooth-width-10mm-outside-diameter-102mm-sku-21499100/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 80 teeth tooth width 10mm outside diameter 82mm SKU: 21499080](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-80-teeth-tooth-width-10mm-outside-diameter-82mm-sku-21499080/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 75 teeth tooth width 10mm outside diameter 77mm SKU: 21499075](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-75-teeth-tooth-width-10mm-outside-diameter-77mm-sku-21499075/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 72 teeth tooth width 10mm outside diameter 74mm SKU: 21499072](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-72-teeth-tooth-width-10mm-outside-diameter-74mm-sku-21499072/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 70 teeth tooth width 10mm outside diameter 72mm SKU: 21499070](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-70-teeth-tooth-width-10mm-outside-diameter-72mm-sku-21499070/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 65 teeth tooth width 10mm outside diameter 67mm SKU: 21499065](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-65-teeth-tooth-width-10mm-outside-diameter-67mm-sku-21499065/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 64 teeth tooth width 10mm outside diameter 66mm SKU: 21499064](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-64-teeth-tooth-width-10mm-outside-diameter-66mm-sku-21499064/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 60 teeth tooth width 10mm outside diameter 62mm SKU: 21499060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-60-teeth-tooth-width-10mm-outside-diameter-62mm-sku-21499060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 54 teeth tooth width 10mm outside diameter 56mm SKU: 21499054](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-54-teeth-tooth-width-10mm-outside-diameter-56mm-sku-21499054/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 50 teeth tooth width 10mm outside diameter 52mm SKU: 21499050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-50-teeth-tooth-width-10mm-outside-diameter-52mm-sku-21499050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 48 teeth tooth width 10mm outside diameter 50mm SKU: 21499048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-48-teeth-tooth-width-10mm-outside-diameter-50mm-sku-21499048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 45 teeth tooth width 10mm outside diameter 47mm SKU: 21499045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-45-teeth-tooth-width-10mm-outside-diameter-47mm-sku-21499045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 40 teeth tooth width 10mm outside diameter 42mm SKU: 21499040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-40-teeth-tooth-width-10mm-outside-diameter-42mm-sku-21499040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 36 teeth tooth width 10mm outside diameter 38mm SKU: 21499036](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-36-teeth-tooth-width-10mm-outside-diameter-38mm-sku-21499036/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 30 teeth tooth width 10mm outside diameter 32mm SKU: 21499030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-30-teeth-tooth-width-10mm-outside-diameter-32mm-sku-21499030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 28 teeth tooth width 10mm outside diameter 30mm SKU: 21499028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-28-teeth-tooth-width-10mm-outside-diameter-30mm-sku-21499028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 26 teeth tooth width 10mm outside diameter 28mm SKU: 21499026](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-26-teeth-tooth-width-10mm-outside-diameter-28mm-sku-21499026/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 25 teeth tooth width 10mm outside diameter 27mm SKU: 21499025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-25-teeth-tooth-width-10mm-outside-diameter-27mm-sku-21499025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 24 teeth tooth width 10mm outside diameter 26mm SKU: 21499024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-24-teeth-tooth-width-10mm-outside-diameter-26mm-sku-21499024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 22 teeth tooth width 10mm outside diameter 24mm SKU: 21499022](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-22-teeth-tooth-width-10mm-outside-diameter-24mm-sku-21499022/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 20 teeth tooth width 10mm outside diameter 22mm SKU: 21499020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-20-teeth-tooth-width-10mm-outside-diameter-22mm-sku-21499020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 19 teeth tooth width 10mm outside diameter 21mm SKU: 21499019](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-19-teeth-tooth-width-10mm-outside-diameter-21mm-sku-21499019/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 18 teeth tooth width 10mm outside diameter 20mm SKU: 21499018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-18-teeth-tooth-width-10mm-outside-diameter-20mm-sku-21499018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 17 teeth tooth width 10mm outside diameter 19mm SKU: 21499017](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-17-teeth-tooth-width-10mm-outside-diameter-19mm-sku-21499017/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 16 teeth tooth width 10mm outside diameter 18mm SKU: 21499016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-16-teeth-tooth-width-10mm-outside-diameter-18mm-sku-21499016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 15 teeth tooth width 10mm outside diameter 17mm SKU: 21499015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-15-teeth-tooth-width-10mm-outside-diameter-17mm-sku-21499015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 14 teeth tooth width 10mm outside diameter 16mm SKU: 21499014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-14-teeth-tooth-width-10mm-outside-diameter-16mm-sku-21499014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 13 teeth tooth width 10mm outside diameter 15mm SKU: 21499013](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-13-teeth-tooth-width-10mm-outside-diameter-15mm-sku-21499013/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1 12 teeth tooth width 10mm outside diameter 14mm SKU: 21499012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-12-teeth-tooth-width-10mm-outside-diameter-14mm-sku-21499012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Angle joint DIN 71802 type CS with safety circlip size 8 thread M5 right with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699625](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-8-thread-m5-right-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699625/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 right with nut stainless steel 1.4301 SKU: 63699614](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-19-thread-m14x1-5-right-with-nut-stainless-steel-1-4301-sku-63699614/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 16 thread M10 right with nut stainless steel 1.4301 SKU: 63699610](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-16-thread-m10-right-with-nut-stainless-steel-1-4301-sku-63699610/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 13 thread M8 right with nut stainless steel 1.4301 SKU: 63699608](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-13-thread-m8-right-with-nut-stainless-steel-1-4301-sku-63699608/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 10 thread M6 right with nut stainless steel 1.4301 SKU: 63699606](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-10-thread-m6-right-with-nut-stainless-steel-1-4301-sku-63699606/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 8 thread M5 right with nut stainless steel 1.4301 SKU: 63699605](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-8-thread-m5-right-with-nut-stainless-steel-1-4301-sku-63699605/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Axial joint similar to DIN 71802 size 19 thread M14x1.5 RH with nut stainless steel 1.4301 SKU: 63699314](https://maedler.in/product/axial-joint-similar-to-din-71802-size-19-thread-m14x1-5-rh-with-nut-stainless-steel-1-4301-sku-63699314/): Material: Stainless steel 1.4301 (AISI 304).With threaded bolt and hexagon nut.Right-hand thread in the socket. - [Axial joint similar to DIN 71802 size 16 thread M10 RH with nut stainless steel 1.4301 SKU: 63699310](https://maedler.in/product/axial-joint-similar-to-din-71802-size-16-thread-m10-rh-with-nut-stainless-steel-1-4301-sku-63699310/): Material: Stainless steel 1.4301 (AISI 304).With threaded bolt and hexagon nut.Right-hand thread in the socket. - [Axial joint similar to DIN 71802 size 13 thread M8 RH with nut stainless steel 1.4301 SKU: 63699308](https://maedler.in/product/axial-joint-similar-to-din-71802-size-13-thread-m8-rh-with-nut-stainless-steel-1-4301-sku-63699308/): Material: Stainless steel 1.4301 (AISI 304).With threaded bolt and hexagon nut.Right-hand thread in the socket. - [Axial joint similar to DIN 71802 size 10 thread M6 RH with nut stainless steel 1.4301 SKU: 63699306](https://maedler.in/product/axial-joint-similar-to-din-71802-size-10-thread-m6-rh-with-nut-stainless-steel-1-4301-sku-63699306/): Material: Stainless steel 1.4301 (AISI 304).With threaded bolt and hexagon nut.Right-hand thread in the socket. - [Axial joint similar to DIN 71802 size 8 thread M5 RH with nut stainless steel 1.4301 SKU: 63699305](https://maedler.in/product/axial-joint-similar-to-din-71802-size-8-thread-m5-rh-with-nut-stainless-steel-1-4301-sku-63699305/): Material: Stainless steel 1.4301 (AISI 304).With threaded bolt and hexagon nut.Right-hand thread in the socket. - [Sealing cap for angle joint DIN 71802 size 19 outer diameter 24.5mm SKU: 63678200](https://maedler.in/product/sealing-cap-for-angle-joint-din-71802-size-19-outer-diameter-24-5mm-sku-63678200/): Material: Neoprene, black. The sealing caps have delivered an optimal performance used with joints in very dirty or dusty environment. They also offer good protection against spray water and steam. Temperature range: -30°C to +110°C (short term 140°C). - [Sealing cap for angle joint DIN 71802 size 16 outer diameter 21mm SKU: 63678000](https://maedler.in/product/sealing-cap-for-angle-joint-din-71802-size-16-outer-diameter-21mm-sku-63678000/): Material: Neoprene, black. The sealing caps have delivered an optimal performance used with joints in very dirty or dusty environment. They also offer good protection against spray water and steam. Temperature range: -30°C to +110°C (short term 140°C). - [Sealing cap for angle joint DIN 71802 size 13 outer diameter 17mm SKU: 63677800](https://maedler.in/product/sealing-cap-for-angle-joint-din-71802-size-13-outer-diameter-17mm-sku-63677800/): Material: Neoprene, black. The sealing caps have delivered an optimal performance used with joints in very dirty or dusty environment. They also offer good protection against spray water and steam. Temperature range: -30°C to +110°C (short term 140°C). - [Sealing cap for angle joint DIN 71802 size 10 outer diameter 13mm SKU: 63677600](https://maedler.in/product/sealing-cap-for-angle-joint-din-71802-size-10-outer-diameter-13mm-sku-63677600/): Material: Neoprene, black. The sealing caps have delivered an optimal performance used with joints in very dirty or dusty environment. They also offer good protection against spray water and steam. Temperature range: -30°C to +110°C (short term 140°C). - [Sealing cap for angle joint DIN 71802 size 8 outer diameter 11.5mm SKU: 63677500](https://maedler.in/product/sealing-cap-for-angle-joint-din-71802-size-8-outer-diameter-11-5mm-sku-63677500/): Material: Neoprene, black. The sealing caps have delivered an optimal performance used with joints in very dirty or dusty environment. They also offer good protection against spray water and steam. Temperature range: -30°C to +110°C (short term 140°C). - [Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 left with nut steel zinc-plated with mounted sealing cap SKU: 63673400](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-19-thread-m14x1-5-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63673400/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 16 thread M10 left with nut steel zinc-plated with mounted sealing cap SKU: 63673000](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-16-thread-m10-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63673000/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 13 thread M8 left with nut steel zinc-plated with mounted sealing cap SKU: 63672800](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-13-thread-m8-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63672800/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 10 thread M6 left with nut steel zinc-plated with mounted sealing cap SKU: 63672600](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-10-thread-m6-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63672600/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 8 thread M5 left with nut steel zinc-plated with mounted sealing cap SKU: 63672500](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-8-thread-m5-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63672500/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 left with nut steel zinc-plated SKU: 63671400](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-19-thread-m14x1-5-left-with-nut-steel-zinc-plated-sku-63671400/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 16 thread M10 left with nut steel zinc-plated SKU: 63671000](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-16-thread-m10-left-with-nut-steel-zinc-plated-sku-63671000/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 13 thread M8 left with nut steel zinc-plated SKU: 63670800](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-13-thread-m8-left-with-nut-steel-zinc-plated-sku-63670800/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 10 thread M6 left with nut steel zinc-plated SKU: 63670600](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-10-thread-m6-left-with-nut-steel-zinc-plated-sku-63670600/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 8 thread M5 left with nut steel zinc-plated SKU: 63670500](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-8-thread-m5-left-with-nut-steel-zinc-plated-sku-63670500/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 right with nut steel zinc-plated with mounted sealing cap SKU: 63663400](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-19-thread-m14x1-5-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63663400/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 16 thread M10 right with nut steel zinc-plated with mounted sealing cap SKU: 63663000](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-16-thread-m10-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63663000/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 13 thread M8 right with nut steel zinc-plated with mounted sealing cap SKU: 63662800](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-13-thread-m8-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63662800/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 10 thread M6 right with nut steel zinc-plated with mounted sealing cap SKU: 63662600](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-10-thread-m6-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63662600/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 8 thread M5 right with nut steel zinc-plated with mounted sealing cap SKU: 63662500](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-8-thread-m5-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63662500/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 right with nut steel zinc-plated SKU: 63661400](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-19-thread-m14x1-5-right-with-nut-steel-zinc-plated-sku-63661400/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 16 thread M10 right with nut steel zinc-plated SKU: 63661000](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-16-thread-m10-right-with-nut-steel-zinc-plated-sku-63661000/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 13 thread M8 right with nut steel zinc-plated SKU: 63660800](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-13-thread-m8-right-with-nut-steel-zinc-plated-sku-63660800/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 10 thread M6 right with nut steel zinc-plated SKU: 63660600](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-10-thread-m6-right-with-nut-steel-zinc-plated-sku-63660600/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 8 thread M5 right with nut steel zinc-plated SKU: 63660500](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-8-thread-m5-right-with-nut-steel-zinc-plated-sku-63660500/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 19 thread M14x1.5 left with nut steel zinc-plated with mounted sealing cap SKU: 63653400](https://maedler.in/product/angle-joint-din-71802-type-c-size-19-thread-m14x1-5-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63653400/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 16 thread M10 left with nut steel zinc-plated with mounted sealing cap SKU: 63653000](https://maedler.in/product/angle-joint-din-71802-type-c-size-16-thread-m10-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63653000/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 13 thread M8 left with nut steel zinc-plated with mounted sealing cap SKU: 63652800](https://maedler.in/product/angle-joint-din-71802-type-c-size-13-thread-m8-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63652800/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 10 thread M6 left with nut steel zinc-plated with mounted sealing cap SKU: 63652600](https://maedler.in/product/angle-joint-din-71802-type-c-size-10-thread-m6-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63652600/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 8 thread M5 left with nut steel zinc-plated with mounted sealing cap SKU: 63652500](https://maedler.in/product/angle-joint-din-71802-type-c-size-8-thread-m5-left-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63652500/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 19 thread M14x1.5 left with nut steel zinc-plated SKU: 63651400](https://maedler.in/product/angle-joint-din-71802-type-c-size-19-thread-m14x1-5-left-with-nut-steel-zinc-plated-sku-63651400/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 16 thread M10 left with nut steel zinc-plated SKU: 63651000](https://maedler.in/product/angle-joint-din-71802-type-c-size-16-thread-m10-left-with-nut-steel-zinc-plated-sku-63651000/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 13 thread M8 left with nut steel zinc-plated SKU: 63650800](https://maedler.in/product/angle-joint-din-71802-type-c-size-13-thread-m8-left-with-nut-steel-zinc-plated-sku-63650800/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 10 thread M6 left with nut steel zinc-plated SKU: 63650600](https://maedler.in/product/angle-joint-din-71802-type-c-size-10-thread-m6-left-with-nut-steel-zinc-plated-sku-63650600/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 8 thread M5 left with nut steel zinc-plated SKU: 63650500](https://maedler.in/product/angle-joint-din-71802-type-c-size-8-thread-m5-left-with-nut-steel-zinc-plated-sku-63650500/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 19 thread M14x1.5 right with nut steel zinc-plated with mounted sealing cap SKU: 63643400](https://maedler.in/product/angle-joint-din-71802-type-c-size-19-thread-m14x1-5-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63643400/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 16 thread M10 right with nut steel zinc-plated with mounted sealing cap SKU: 63643000](https://maedler.in/product/angle-joint-din-71802-type-c-size-16-thread-m10-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63643000/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 13 thread M8 right with nut steel zinc-plated with mounted sealing cap SKU: 63642800](https://maedler.in/product/angle-joint-din-71802-type-c-size-13-thread-m8-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63642800/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 10 thread M6 right with nut steel zinc-plated with mounted sealing cap SKU: 63642600](https://maedler.in/product/angle-joint-din-71802-type-c-size-10-thread-m6-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63642600/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 8 thread M5 right with nut steel zinc-plated with mounted sealing cap SKU: 63642500](https://maedler.in/product/angle-joint-din-71802-type-c-size-8-thread-m5-right-with-nut-steel-zinc-plated-with-mounted-sealing-cap-sku-63642500/): Material: Steel zinc-plated. Ball stud hardened. With mounted sealing cap from neopren, black. Form C: With threaded bolt and hexagon nut. Form CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 19 thread M14x1.5 right with nut steel zinc-plated SKU: 63641400](https://maedler.in/product/angle-joint-din-71802-type-c-size-19-thread-m14x1-5-right-with-nut-steel-zinc-plated-sku-63641400/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 16 thread M10 right with nut steel zinc-plated SKU: 63641000](https://maedler.in/product/angle-joint-din-71802-type-c-size-16-thread-m10-right-with-nut-steel-zinc-plated-sku-63641000/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 13 thread M8 right with nut steel zinc-plated SKU: 63640800](https://maedler.in/product/angle-joint-din-71802-type-c-size-13-thread-m8-right-with-nut-steel-zinc-plated-sku-63640800/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 10 thread M6 right with nut steel zinc-plated SKU: 63640600](https://maedler.in/product/angle-joint-din-71802-type-c-size-10-thread-m6-right-with-nut-steel-zinc-plated-sku-63640600/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type C size 8 thread M5 right with nut steel zinc-plated SKU: 63640500](https://maedler.in/product/angle-joint-din-71802-type-c-size-8-thread-m5-right-with-nut-steel-zinc-plated-sku-63640500/): Material: Steel zinc-plated. With threaded bolt and hexagon nut, ball stud hardened. Form C: Without circlip. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socketmarked with a circumferential groove. * Pivoting angle reduced by circlip. - [Axial joint similar to DIN 71802 size 19 thread M14x1,5 RH with nut steel zinc plated SKU: 63631400](https://maedler.in/product/axial-joint-similar-to-din-71802-size-19-thread-m14x15-rh-with-nut-steel-zinc-plated-sku-63631400/): Material: Steel, zinc-plated.With threaded bolt and hexagon nut,ball stud hardened.Right-hand thread in the socket. - [Axial joint similar to DIN 71802 size 16 thread M10 RH with nut steel zinc plated SKU: 63631000](https://maedler.in/product/axial-joint-similar-to-din-71802-size-16-thread-m10-rh-with-nut-steel-zinc-plated-sku-63631000/): Material: Steel, zinc-plated.With threaded bolt and hexagon nut,ball stud hardened.Right-hand thread in the socket. - [Axial joint similar to DIN 71802 size 13 thread M8 RH with nut steel zinc plated SKU: 63630800](https://maedler.in/product/axial-joint-similar-to-din-71802-size-13-thread-m8-rh-with-nut-steel-zinc-plated-sku-63630800/): Material: Steel, zinc-plated.With threaded bolt and hexagon nut,ball stud hardened.Right-hand thread in the socket. - [Axial joint similar to DIN 71802 size 10 thread M6 RH with nut steel zinc plated SKU: 63630600](https://maedler.in/product/axial-joint-similar-to-din-71802-size-10-thread-m6-rh-with-nut-steel-zinc-plated-sku-63630600/): Material: Steel, zinc-plated.With threaded bolt and hexagon nut,ball stud hardened.Right-hand thread in the socket. - [Axial joint similar to DIN 71802 size 8 thread M5 RH with nut steel zinc plated SKU: 63630500](https://maedler.in/product/axial-joint-similar-to-din-71802-size-8-thread-m5-rh-with-nut-steel-zinc-plated-sku-63630500/): Material: Steel, zinc-plated.With threaded bolt and hexagon nut,ball stud hardened.Right-hand thread in the socket. - [Rod end PF short version bore 20mm internal thread M16 left relubricateable SKU: 63447000](https://maedler.in/product/rod-end-pf-short-version-bore-20mm-internal-thread-m16-left-relubricateable-sku-63447000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Short version. Available only with internal thread. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. - [Rod end PF short version bore 15mm internal thread M12 left relubricateable SKU: 63446500](https://maedler.in/product/rod-end-pf-short-version-bore-15mm-internal-thread-m12-left-relubricateable-sku-63446500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Short version. Available only with internal thread. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. - [Rod end PF short version bore 10mm internal thread M8 left relubricateable SKU: 63446000](https://maedler.in/product/rod-end-pf-short-version-bore-10mm-internal-thread-m8-left-relubricateable-sku-63446000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Short version. Available only with internal thread. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. - [Rod end PF short version bore 20mm internal thread M16 right relubricateable SKU: 63442000](https://maedler.in/product/rod-end-pf-short-version-bore-20mm-internal-thread-m16-right-relubricateable-sku-63442000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Short version. Available only with internal thread. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. - [Rod end PF short version bore 15mm internal thread M12 right relubricateable SKU: 63441500](https://maedler.in/product/rod-end-pf-short-version-bore-15mm-internal-thread-m12-right-relubricateable-sku-63441500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Short version. Available only with internal thread. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. - [Rod end PF short version bore 10mm internal thread M8 right relubricateable SKU: 63441000](https://maedler.in/product/rod-end-pf-short-version-bore-10mm-internal-thread-m8-right-relubricateable-sku-63441000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Short version. Available only with internal thread. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 80mm outer diameter 120mm stainless SKU: 63399780](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-80mm-outer-diameter-120mm-stainless-sku-63399780/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 70mm outer diameter 105mm stainless SKU: 63399770](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-70mm-outer-diameter-105mm-stainless-sku-63399770/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 60mm outer diameter 90mm stainless SKU: 63399760](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-60mm-outer-diameter-90mm-stainless-sku-63399760/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 50mm outer diameter 75mm stainless SKU: 63399750](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-50mm-outer-diameter-75mm-stainless-sku-63399750/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 40mm outer diameter 62mm stainless SKU: 63399740](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-40mm-outer-diameter-62mm-stainless-sku-63399740/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 35mm outer diameter 55mm stainless SKU: 63399735](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-35mm-outer-diameter-55mm-stainless-sku-63399735/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 30mm outer diameter 47mm stainless SKU: 63399730](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-30mm-outer-diameter-47mm-stainless-sku-63399730/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 25mm outer diameter 42mm stainless SKU: 63399725](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-25mm-outer-diameter-42mm-stainless-sku-63399725/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 20mm outer diameter 35mm stainless SKU: 63399720](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-20mm-outer-diameter-35mm-stainless-sku-63399720/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 17mm outer diameter 30mm stainless SKU: 63399717](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-17mm-outer-diameter-30mm-stainless-sku-63399717/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 16mm outer diameter 30mm stainless SKU: 63399716](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-16mm-outer-diameter-30mm-stainless-sku-63399716/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 15mm outer diameter 26mm stainless SKU: 63399715](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-15mm-outer-diameter-26mm-stainless-sku-63399715/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 12mm outer diameter 22mm stainless SKU: 63399712](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-12mm-outer-diameter-22mm-stainless-sku-63399712/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 10mm outer diameter 19mm stainless SKU: 63399710](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-10mm-outer-diameter-19mm-stainless-sku-63399710/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 8mm outer diameter 16mm stainless SKU: 63399708](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-8mm-outer-diameter-16mm-stainless-sku-63399708/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Radial spherical bearing DIN ISO 12240-1-E type GE...UK maintenance-free bore 6mm outer diameter 14mm stainless SKU: 63399706](https://maedler.in/product/radial-spherical-bearing-din-iso-12240-1-e-type-ge-uk-maintenance-free-bore-6mm-outer-diameter-14mm-stainless-sku-63399706/): Material: Inner ring stainless steel 1.4125, AISI 440 C (from size 45 stainless steel 1.4112), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.DIN ISO 12240-1 (DIN 648) series E (small version).Maintenance-free.Suitable for high unidirectional load.Sliding speed up to 10 m/min. - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 40mm outer diameter 72mm stainless steel SKU: 63399340](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-40mm-outer-diameter-72mm-stainless-steel-sku-63399340/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 35mm outer diameter 62mm stainless steel SKU: 63399335](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-35mm-outer-diameter-62mm-stainless-steel-sku-63399335/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 30mm outer diameter 55mm stainless steel SKU: 63399330](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-30mm-outer-diameter-55mm-stainless-steel-sku-63399330/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 25mm outer diameter 47mm stainless steel SKU: 63399325](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-25mm-outer-diameter-47mm-stainless-steel-sku-63399325/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 22mm outer diameter 42mm stainless steel SKU: 63399322](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-22mm-outer-diameter-42mm-stainless-steel-sku-63399322/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 20mm outer diameter 40mm stainless steel SKU: 63399320](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-20mm-outer-diameter-40mm-stainless-steel-sku-63399320/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 18mm outer diameter 35mm stainless steel SKU: 63399318](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-18mm-outer-diameter-35mm-stainless-steel-sku-63399318/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 16mm outer diameter 32mm stainless steel SKU: 63399316](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-16mm-outer-diameter-32mm-stainless-steel-sku-63399316/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 14mm outer diameter 28mm stainless steel SKU: 63399314](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-14mm-outer-diameter-28mm-stainless-steel-sku-63399314/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 12mm outer diameter 26mm stainless steel SKU: 63399312](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-12mm-outer-diameter-26mm-stainless-steel-sku-63399312/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 10mm outer diameter 22mm stainless steel SKU: 63399310](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-10mm-outer-diameter-22mm-stainless-steel-sku-63399310/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 8mm outer diameter 19mm stainless steel SKU: 63399308](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-8mm-outer-diameter-19mm-stainless-steel-sku-63399308/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 6mm outer diameter 16mm stainless steel SKU: 63399306](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-6mm-outer-diameter-16mm-stainless-steel-sku-63399306/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type GD without outer ring maintenance-free bore 5mm outer diameter 13mm stainless steel SKU: 63399305](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-gd-without-outer-ring-maintenance-free-bore-5mm-outer-diameter-13mm-stainless-steel-sku-63399305/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell stainless steel 1.4571 (AISI 316 Ti), with PTFE-lining.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Maintenance-free.Suitable for high dynamic loads.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 40mm outer diameter 72mm stainless steel == Initial lubrication required before use == SKU: 63399240](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-40mm-outer-diameter-72mm-stainless-steel-initial-lubrication-required-before-use-sku-63399240/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 35mm outer diameter 62mm stainless steel == Initial lubrication required before use == SKU: 63399235](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-35mm-outer-diameter-62mm-stainless-steel-initial-lubrication-required-before-use-sku-63399235/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 30mm outer diameter 55mm stainless steel == Initial lubrication required before use == SKU: 63399230](https://maedler.in/product/spherical-bearing-din-iso-12240-1-k-type-g-without-outer-ring-relubricateable-bore-30mm-outer-diameter-55mm-stainless-steel-initial-lubrication-required-before-use-sku-63399230/): Material: Inner ring stainless steel 1.4034 (AISI 440 C), hardened, ground and polished.Bearing shell special brass CuZn38Al1.Dimensions according to DIN ISO 12240-1 (DIN 648) series K (wide version).Can be re-lubricated (from size 6mm with lubricatin hole).Initial lubrication required before useFor high sliding speed up to 60 m/min.Without outer ring (smaller outer diameter than version S or S...D). - [Precision spur gear made of steel 16MnCr5 module 1.5 25 teeth bore 12mm hardened and ground outside diameter 40.5mm SKU: 22882500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-25-teeth-bore-12mm-hardened-and-ground-outside-diameter-40-5mm-sku-22882500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 24 teeth bore 15mm hardened and ground outside diameter 39mm SKU: 22882415](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-24-teeth-bore-15mm-hardened-and-ground-outside-diameter-39mm-sku-22882415/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 24 teeth bore 10mm hardened and ground outside diameter 39mm SKU: 22882400](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-24-teeth-bore-10mm-hardened-and-ground-outside-diameter-39mm-sku-22882400/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 20 teeth bore 15mm hardened and ground outside diameter 33mm SKU: 22882015](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-20-teeth-bore-15mm-hardened-and-ground-outside-diameter-33mm-sku-22882015/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 20 teeth bore 10mm hardened and ground outside diameter 33mm SKU: 22882000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-20-teeth-bore-10mm-hardened-and-ground-outside-diameter-33mm-sku-22882000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 18 teeth bore 12mm hardened and ground outside diameter 30mm SKU: 22881812](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-18-teeth-bore-12mm-hardened-and-ground-outside-diameter-30mm-sku-22881812/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 18 teeth bore 10mm hardened and ground outside diameter 30mm SKU: 22881800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-18-teeth-bore-10mm-hardened-and-ground-outside-diameter-30mm-sku-22881800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 15 teeth bore 12mm hardened and ground outside diameter 25.5mm SKU: 22881512](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-15-teeth-bore-12mm-hardened-and-ground-outside-diameter-25-5mm-sku-22881512/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 15 teeth bore 10mm hardened and ground outside diameter 25.5mm SKU: 22881500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-15-teeth-bore-10mm-hardened-and-ground-outside-diameter-25-5mm-sku-22881500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 12 teeth bore 8mm hardened and ground outside diameter 21mm SKU: 22881200](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-12-teeth-bore-8mm-hardened-and-ground-outside-diameter-21mm-sku-22881200/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 60 teeth bore 20mm hardened and ground outside diameter 62mm SKU: 22486020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-60-teeth-bore-20mm-hardened-and-ground-outside-diameter-62mm-sku-22486020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 60 teeth bore 12mm hardened and ground outside diameter 62mm SKU: 22486000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-60-teeth-bore-12mm-hardened-and-ground-outside-diameter-62mm-sku-22486000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 50 teeth bore 20mm hardened and ground outside diameter 52mm SKU: 22485020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-50-teeth-bore-20mm-hardened-and-ground-outside-diameter-52mm-sku-22485020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 50 teeth bore 12mm hardened and ground outside diameter 52mm SKU: 22485000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-50-teeth-bore-12mm-hardened-and-ground-outside-diameter-52mm-sku-22485000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 48 teeth bore 15mm hardened and ground outside diameter 50mm SKU: 22484815](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-48-teeth-bore-15mm-hardened-and-ground-outside-diameter-50mm-sku-22484815/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 48 teeth bore 12mm hardened and ground outside diameter 50mm SKU: 22484800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-48-teeth-bore-12mm-hardened-and-ground-outside-diameter-50mm-sku-22484800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 40 teeth bore 15mm hardened and ground outside diameter 42mm SKU: 22484015](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-40-teeth-bore-15mm-hardened-and-ground-outside-diameter-42mm-sku-22484015/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 40 teeth bore 12mm hardened and ground outside diameter 42mm SKU: 22484000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-40-teeth-bore-12mm-hardened-and-ground-outside-diameter-42mm-sku-22484000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 36 teeth bore 15mm hardened and ground outside diameter 38mm SKU: 22483615](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-36-teeth-bore-15mm-hardened-and-ground-outside-diameter-38mm-sku-22483615/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 36 teeth bore 10mm hardened and ground outside diameter 38mm SKU: 22483600](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-36-teeth-bore-10mm-hardened-and-ground-outside-diameter-38mm-sku-22483600/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 30 teeth bore 12mm hardened and ground outside diameter 32mm SKU: 22483012](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-30-teeth-bore-12mm-hardened-and-ground-outside-diameter-32mm-sku-22483012/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 30 teeth bore 10mm hardened and ground outside diameter 32mm SKU: 22483000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-30-teeth-bore-10mm-hardened-and-ground-outside-diameter-32mm-sku-22483000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 25 teeth bore 12mm hardened and ground outside diameter 27mm SKU: 22482512](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-25-teeth-bore-12mm-hardened-and-ground-outside-diameter-27mm-sku-22482512/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 25 teeth bore 10mm hardened and ground outside diameter 27mm SKU: 22482500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-25-teeth-bore-10mm-hardened-and-ground-outside-diameter-27mm-sku-22482500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 24 teeth bore 12mm hardened and ground outside diameter 26mm SKU: 22482412](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-24-teeth-bore-12mm-hardened-and-ground-outside-diameter-26mm-sku-22482412/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 24 teeth bore 10mm hardened and ground outside diameter 26mm SKU: 22482400](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-24-teeth-bore-10mm-hardened-and-ground-outside-diameter-26mm-sku-22482400/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 20 teeth bore 8mm hardened and ground outside diameter 22mm SKU: 22482000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-20-teeth-bore-8mm-hardened-and-ground-outside-diameter-22mm-sku-22482000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1 18 teeth bore 8mm hardened and ground outside diameter 20mm SKU: 22481800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-18-teeth-bore-8mm-hardened-and-ground-outside-diameter-20mm-sku-22481800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Spur gear stainless steel 1.4305 with hub module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 21899320](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-21899320/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21899280](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21899280/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 70 teeth tooth width 17mm outside diameter 108mm SKU: 21899270](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-70-teeth-tooth-width-17mm-outside-diameter-108mm-sku-21899270/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21899260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21899260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 55 teeth tooth width 17mm outside diameter 85.5mm SKU: 21899255](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-55-teeth-tooth-width-17mm-outside-diameter-85-5mm-sku-21899255/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21899250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21899250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 21899248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-21899248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21899245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21899245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21899240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21899240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 35 teeth tooth width 17mm outside diameter 55.5mm SKU: 21899235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-35-teeth-tooth-width-17mm-outside-diameter-55-5mm-sku-21899235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21899230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21899230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 28 teeth tooth width 17mm outside diameter 45mm SKU: 21899228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-28-teeth-tooth-width-17mm-outside-diameter-45mm-sku-21899228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21899225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21899225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 24 teeth tooth width 17mm outside diameter 39mm SKU: 21899224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-24-teeth-tooth-width-17mm-outside-diameter-39mm-sku-21899224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 20 teeth tooth width 17mm outside diameter 33mm SKU: 21899220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-20-teeth-tooth-width-17mm-outside-diameter-33mm-sku-21899220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 18 teeth tooth width 17mm outside diameter 30mm SKU: 21899218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-18-teeth-tooth-width-17mm-outside-diameter-30mm-sku-21899218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 17 teeth tooth width 17mm outside diameter 28.5mm SKU: 21899217](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-17-teeth-tooth-width-17mm-outside-diameter-28-5mm-sku-21899217/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 16 teeth tooth width 17mm outside diameter 27mm SKU: 21899216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-16-teeth-tooth-width-17mm-outside-diameter-27mm-sku-21899216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 15 teeth tooth width 17mm outside diameter 25.5mm SKU: 21899215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-15-teeth-tooth-width-17mm-outside-diameter-25-5mm-sku-21899215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 14 teeth tooth width 17mm outside diameter 24mm SKU: 21899214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-14-teeth-tooth-width-17mm-outside-diameter-24mm-sku-21899214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 13 teeth tooth width 17mm outside diameter 22.5mm SKU: 21899213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-13-teeth-tooth-width-17mm-outside-diameter-22-5mm-sku-21899213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 12 teeth tooth width 17mm outside diameter 21mm SKU: 21899212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-12-teeth-tooth-width-17mm-outside-diameter-21mm-sku-21899212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 1.5 11 teeth tooth width 17mm outside diameter 19.5mm SKU: 21899211](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-1-5-11-teeth-tooth-width-17mm-outside-diameter-19-5mm-sku-21899211/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 80 teeth tooth width 15mm outside diameter 123mm SKU: 21899080](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-123mm-sku-21899080/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 70 teeth tooth width 15mm outside diameter 108mm SKU: 21899070](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-108mm-sku-21899070/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 65 teeth tooth width 15mm outside diameter 100.5mm SKU: 21899065](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-65-teeth-tooth-width-15mm-outside-diameter-100-5mm-sku-21899065/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 60 teeth tooth width 15mm outside diameter 93mm SKU: 21899060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-93mm-sku-21899060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 55 teeth tooth width 15mm outside diameter 85.5mm SKU: 21899055](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-55-teeth-tooth-width-15mm-outside-diameter-85-5mm-sku-21899055/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 50 teeth tooth width 15mm outside diameter 78mm SKU: 21899050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-78mm-sku-21899050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel 1.4305 with hub module 1.5 48 teeth tooth width 15mm outside diameter 75mm SKU: 21899048](https://maedler.in/product/spur-gear-made-of-steel-1-4305-with-hub-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-75mm-sku-21899048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 45 teeth tooth width 15mm outside diameter 70.5mm SKU: 21899045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-70-5mm-sku-21899045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 40 teeth tooth width 15mm outside diameter 63mm SKU: 21899040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-63mm-sku-21899040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 35 teeth tooth width 15mm outside diameter 55.5mm SKU: 21899035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-35-teeth-tooth-width-15mm-outside-diameter-55-5mm-sku-21899035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 30 teeth tooth width 15mm outside diameter 48mm SKU: 21899030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-48mm-sku-21899030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 28 teeth tooth width 15mm outside diameter 45mm SKU: 21899028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-28-teeth-tooth-width-15mm-outside-diameter-45mm-sku-21899028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 25 teeth tooth width 15mm outside diameter 40.5mm SKU: 21899025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-40-5mm-sku-21899025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 24 teeth tooth width 15mm outside diameter 39mm SKU: 21899024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-24-teeth-tooth-width-15mm-outside-diameter-39mm-sku-21899024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 22 teeth tooth width 15mm outside diameter 36mm SKU: 21899022](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-22-teeth-tooth-width-15mm-outside-diameter-36mm-sku-21899022/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 20 teeth tooth width 15mm outside diameter 33mm SKU: 21899020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-20-teeth-tooth-width-15mm-outside-diameter-33mm-sku-21899020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 18 teeth tooth width 15mm outside diameter 30mm SKU: 21899018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-18-teeth-tooth-width-15mm-outside-diameter-30mm-sku-21899018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 17 teeth tooth width 15mm outside diameter 28,5mm SKU: 21899017](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-17-teeth-tooth-width-15mm-outside-diameter-285mm-sku-21899017/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 16 teeth tooth width 15mm outside diameter 27mm SKU: 21899016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-16-teeth-tooth-width-15mm-outside-diameter-27mm-sku-21899016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 15 teeth tooth width 15mm outside diameter 25.5mm SKU: 21899015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-15-teeth-tooth-width-15mm-outside-diameter-25-5mm-sku-21899015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 14 teeth tooth width 15mm outside diameter 24mm SKU: 21899014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-14-teeth-tooth-width-15mm-outside-diameter-24mm-sku-21899014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 12 teeth tooth width 15mm outside diameter 21mm SKU: 21899012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-12-teeth-tooth-width-15mm-outside-diameter-21mm-sku-21899012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 1.5 11 teeth tooth width 15mm outside diameter 19,5mm SKU: 21899011](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-1-5-11-teeth-tooth-width-15mm-outside-diameter-195mm-sku-21899011/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21895260](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21895260/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21895250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21895250/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21895240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21895240/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21895236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21895236/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21895232](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21895232/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21895230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21895230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21895225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21895225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 120 teeth tooth width 17mm outside diameter 183mm SKU: 21895120](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-120-teeth-tooth-width-17mm-outside-diameter-183mm-sku-21895120/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 100 teeth tooth width 17mm outside diameter 153mm SKU: 21895100](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-100-teeth-tooth-width-17mm-outside-diameter-153mm-sku-21895100/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 90 teeth tooth width 17mm outside diameter 138mm SKU: 21895090](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-90-teeth-tooth-width-17mm-outside-diameter-138mm-sku-21895090/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 80 teeth tooth width 17mm outside diameter 123mm SKU: 21895080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-80-teeth-tooth-width-17mm-outside-diameter-123mm-sku-21895080/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 72 teeth tooth width 17mm outside diameter 111mm SKU: 21895072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-72-teeth-tooth-width-17mm-outside-diameter-111mm-sku-21895072/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 70 teeth tooth width 17mm outside diameter 108mm SKU: 21895070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-70-teeth-tooth-width-17mm-outside-diameter-108mm-sku-21895070/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 64 teeth tooth width 17mm outside diameter 99mm SKU: 21895064](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-64-teeth-tooth-width-17mm-outside-diameter-99mm-sku-21895064/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 60 teeth tooth width 17mm outside diameter 93mm SKU: 21895060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-sku-21895060/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 56 teeth tooth width 17mm outside diameter 87mm SKU: 21895056](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-56-teeth-tooth-width-17mm-outside-diameter-87mm-sku-21895056/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 50 teeth tooth width 17mm outside diameter 78mm SKU: 21895050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-sku-21895050/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 48 teeth tooth width 17mm outside diameter 75mm SKU: 21895048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-48-teeth-tooth-width-17mm-outside-diameter-75mm-sku-21895048/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 45 teeth tooth width 17mm outside diameter 70.5mm SKU: 21895045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-45-teeth-tooth-width-17mm-outside-diameter-70-5mm-sku-21895045/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 40 teeth tooth width 17mm outside diameter 63mm SKU: 21895040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-40-teeth-tooth-width-17mm-outside-diameter-63mm-sku-21895040/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 36 teeth tooth width 17mm outside diameter 57mm SKU: 21895036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-36-teeth-tooth-width-17mm-outside-diameter-57mm-sku-21895036/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 32 teeth tooth width 17mm outside diameter 51mm SKU: 21895032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-32-teeth-tooth-width-17mm-outside-diameter-51mm-sku-21895032/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 30 teeth tooth width 17mm outside diameter 48mm SKU: 21895030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-30-teeth-tooth-width-17mm-outside-diameter-48mm-sku-21895030/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 1.5 25 teeth tooth width 17mm outside diameter 40.5mm SKU: 21895025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-1-5-25-teeth-tooth-width-17mm-outside-diameter-40-5mm-sku-21895025/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 1.5 60 teeth tooth width 17mm outside diameter 93mm teeth induction hardened SKU: 21888160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-60-teeth-tooth-width-17mm-outside-diameter-93mm-teeth-induction-hardened-sku-21888160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 1.5 50 teeth tooth width 17mm outside diameter 78mm teeth induction hardened SKU: 21888150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-1-5-50-teeth-tooth-width-17mm-outside-diameter-78mm-teeth-induction-hardened-sku-21888150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Clevis DIN 71752 size 16 x 32 left handed steel zinc-plated SKU: 63731500](https://maedler.in/product/clevis-din-71752-size-16-x-32-left-handed-steel-zinc-plated-sku-63731500/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 14 x 56 left handed steel zinc-plated SKU: 63731400](https://maedler.in/product/clevis-din-71752-size-14-x-56-left-handed-steel-zinc-plated-sku-63731400/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 14 x 28 left handed steel zinc-plated SKU: 63731300](https://maedler.in/product/clevis-din-71752-size-14-x-28-left-handed-steel-zinc-plated-sku-63731300/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 12 x 48 left handed steel zinc-plated SKU: 63731200](https://maedler.in/product/clevis-din-71752-size-12-x-48-left-handed-steel-zinc-plated-sku-63731200/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 12 x 24 left handed steel zinc-plated SKU: 63731100](https://maedler.in/product/clevis-din-71752-size-12-x-24-left-handed-steel-zinc-plated-sku-63731100/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 10 x 40 left handed steel zinc-plated SKU: 63731000](https://maedler.in/product/clevis-din-71752-size-10-x-40-left-handed-steel-zinc-plated-sku-63731000/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 10 x 20 left handed steel zinc-plated SKU: 63730900](https://maedler.in/product/clevis-din-71752-size-10-x-20-left-handed-steel-zinc-plated-sku-63730900/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 8 x 32 left handed steel zinc-plated SKU: 63730800](https://maedler.in/product/clevis-din-71752-size-8-x-32-left-handed-steel-zinc-plated-sku-63730800/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 8 x 16 left handed steel zinc-plated SKU: 63730700](https://maedler.in/product/clevis-din-71752-size-8-x-16-left-handed-steel-zinc-plated-sku-63730700/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 6 x 24 left handed steel zinc-plated SKU: 63730600](https://maedler.in/product/clevis-din-71752-size-6-x-24-left-handed-steel-zinc-plated-sku-63730600/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 6 x 12 left handed steel zinc-plated SKU: 63730500](https://maedler.in/product/clevis-din-71752-size-6-x-12-left-handed-steel-zinc-plated-sku-63730500/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 5 x 20 left handed steel zinc-plated SKU: 63730400](https://maedler.in/product/clevis-din-71752-size-5-x-20-left-handed-steel-zinc-plated-sku-63730400/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 5 x 10 left handed steel zinc-plated SKU: 63730300](https://maedler.in/product/clevis-din-71752-size-5-x-10-left-handed-steel-zinc-plated-sku-63730300/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 4 x 16 left handed steel zinc-plated SKU: 63730200](https://maedler.in/product/clevis-din-71752-size-4-x-16-left-handed-steel-zinc-plated-sku-63730200/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 4 x 8 left handed steel zinc-plated SKU: 63730100](https://maedler.in/product/clevis-din-71752-size-4-x-8-left-handed-steel-zinc-plated-sku-63730100/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 20 x 40 right handed steel zinc-plated SKU: 63722000](https://maedler.in/product/clevis-din-71752-size-20-x-40-right-handed-steel-zinc-plated-sku-63722000/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 16 x 64 right handed fine thread M16x1.5 steel zinc-plated SKU: 63721600F](https://maedler.in/product/clevis-din-71752-size-16-x-64-right-handed-fine-thread-m16x1-5-steel-zinc-plated-sku-63721600f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 16 x 64 right handed steel zinc-plated SKU: 63721600](https://maedler.in/product/clevis-din-71752-size-16-x-64-right-handed-steel-zinc-plated-sku-63721600/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 16 x 32 right handed fine thread M16x1.5 steel zinc-plated SKU: 63721500F](https://maedler.in/product/clevis-din-71752-size-16-x-32-right-handed-fine-thread-m16x1-5-steel-zinc-plated-sku-63721500f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 16 x 32 right handed steel zinc-plated SKU: 63721500](https://maedler.in/product/clevis-din-71752-size-16-x-32-right-handed-steel-zinc-plated-sku-63721500/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 14 x 56 right handed fine thread M14x1.5 steel zinc-plated SKU: 63721400F](https://maedler.in/product/clevis-din-71752-size-14-x-56-right-handed-fine-thread-m14x1-5-steel-zinc-plated-sku-63721400f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 14 x 56 right handed steel zinc-plated SKU: 63721400](https://maedler.in/product/clevis-din-71752-size-14-x-56-right-handed-steel-zinc-plated-sku-63721400/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 14 x 28 right handed fine thread M14x1.5 steel zinc-plated SKU: 63721300F](https://maedler.in/product/clevis-din-71752-size-14-x-28-right-handed-fine-thread-m14x1-5-steel-zinc-plated-sku-63721300f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 14 x 28 right handed steel zinc-plated SKU: 63721300](https://maedler.in/product/clevis-din-71752-size-14-x-28-right-handed-steel-zinc-plated-sku-63721300/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 12 x 48 right handed fine thread M12x1.25 steel zinc-plated SKU: 63721200F](https://maedler.in/product/clevis-din-71752-size-12-x-48-right-handed-fine-thread-m12x1-25-steel-zinc-plated-sku-63721200f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 12 x 48 right handed steel zinc-plated SKU: 63721200](https://maedler.in/product/clevis-din-71752-size-12-x-48-right-handed-steel-zinc-plated-sku-63721200/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 12 x 24 right handed fine thread M12x1.25 steel zinc-plated SKU: 63721100F](https://maedler.in/product/clevis-din-71752-size-12-x-24-right-handed-fine-thread-m12x1-25-steel-zinc-plated-sku-63721100f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 12 x 24 right handed steel zinc-plated SKU: 63721100](https://maedler.in/product/clevis-din-71752-size-12-x-24-right-handed-steel-zinc-plated-sku-63721100/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 10 x 40 right handed fine thread M10x1.25 steel zinc-plated SKU: 63721000F](https://maedler.in/product/clevis-din-71752-size-10-x-40-right-handed-fine-thread-m10x1-25-steel-zinc-plated-sku-63721000f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 10 x 40 right handed steel zinc-plated SKU: 63721000](https://maedler.in/product/clevis-din-71752-size-10-x-40-right-handed-steel-zinc-plated-sku-63721000/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 10 x 20 right handed fine thread M10x1.25 steel zinc-plated SKU: 63720900F](https://maedler.in/product/clevis-din-71752-size-10-x-20-right-handed-fine-thread-m10x1-25-steel-zinc-plated-sku-63720900f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 10 x 20 right handed steel zinc-plated SKU: 63720900](https://maedler.in/product/clevis-din-71752-size-10-x-20-right-handed-steel-zinc-plated-sku-63720900/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 8 x 32 right handed fine thread M8x1 steel zinc-plated SKU: 63720800F](https://maedler.in/product/clevis-din-71752-size-8-x-32-right-handed-fine-thread-m8x1-steel-zinc-plated-sku-63720800f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 8 x 32 right handed steel zinc-plated SKU: 63720800](https://maedler.in/product/clevis-din-71752-size-8-x-32-right-handed-steel-zinc-plated-sku-63720800/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 8 x 16 right handed fine thread M8x1 steel zinc-plated SKU: 63720700F](https://maedler.in/product/clevis-din-71752-size-8-x-16-right-handed-fine-thread-m8x1-steel-zinc-plated-sku-63720700f/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 8 x 16 right handed steel zinc-plated SKU: 63720700](https://maedler.in/product/clevis-din-71752-size-8-x-16-right-handed-steel-zinc-plated-sku-63720700/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 6 x 24 right handed steel zinc-plated SKU: 63720600](https://maedler.in/product/clevis-din-71752-size-6-x-24-right-handed-steel-zinc-plated-sku-63720600/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 6 x 12 right handed steel zinc-plated SKU: 63720500](https://maedler.in/product/clevis-din-71752-size-6-x-12-right-handed-steel-zinc-plated-sku-63720500/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 5 x 20 right handed steel zinc-plated SKU: 63720400](https://maedler.in/product/clevis-din-71752-size-5-x-20-right-handed-steel-zinc-plated-sku-63720400/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 5 x 10 right handed steel zinc-plated SKU: 63720300](https://maedler.in/product/clevis-din-71752-size-5-x-10-right-handed-steel-zinc-plated-sku-63720300/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 4 x 16 right handed steel zinc-plated SKU: 63720200](https://maedler.in/product/clevis-din-71752-size-4-x-16-right-handed-steel-zinc-plated-sku-63720200/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 4 x 8 right handed steel zinc-plated SKU: 63720100](https://maedler.in/product/clevis-din-71752-size-4-x-8-right-handed-steel-zinc-plated-sku-63720100/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with split pin size 20 x 40 left handed steel zinc-plated SKU: 63712000](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-20-x-40-left-handed-steel-zinc-plated-sku-63712000/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 16 x 64 left handed steel zinc-plated SKU: 63711600](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-16-x-64-left-handed-steel-zinc-plated-sku-63711600/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 16 x 32 left handed steel zinc-plated SKU: 63711500](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-16-x-32-left-handed-steel-zinc-plated-sku-63711500/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 14 x 56 left handed steel zinc-plated SKU: 63711400](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-14-x-56-left-handed-steel-zinc-plated-sku-63711400/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 14 x 28 left handed steel zinc-plated SKU: 63711300](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-14-x-28-left-handed-steel-zinc-plated-sku-63711300/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 12 x 48 left handed steel zinc-plated SKU: 63711200](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-12-x-48-left-handed-steel-zinc-plated-sku-63711200/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 12 x 24 left handed steel zinc-plated SKU: 63711100](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-12-x-24-left-handed-steel-zinc-plated-sku-63711100/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 10 x 40 left handed steel zinc-plated SKU: 63711000](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-10-x-40-left-handed-steel-zinc-plated-sku-63711000/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 10 x 20 left handed steel zinc-plated SKU: 63710900](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-10-x-20-left-handed-steel-zinc-plated-sku-63710900/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 8 x 32 left handed steel zinc-plated SKU: 63710800](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-8-x-32-left-handed-steel-zinc-plated-sku-63710800/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 8 x 16 left handed steel zinc-plated SKU: 63710700](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-8-x-16-left-handed-steel-zinc-plated-sku-63710700/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 6 x 24 left handed steel zinc-plated SKU: 63710600](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-6-x-24-left-handed-steel-zinc-plated-sku-63710600/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 6 x 12 left handed steel zinc-plated SKU: 63710500](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-6-x-12-left-handed-steel-zinc-plated-sku-63710500/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 5 x 20 left handed steel zinc-plated SKU: 63710400](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-5-x-20-left-handed-steel-zinc-plated-sku-63710400/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 5 x 10 left handed steel zinc-plated SKU: 63710300](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-5-x-10-left-handed-steel-zinc-plated-sku-63710300/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 4 x 16 left handed steel zinc-plated SKU: 63710200](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-4-x-16-left-handed-steel-zinc-plated-sku-63710200/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 4 x 8 left handed steel zinc-plated SKU: 63710100](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-4-x-8-left-handed-steel-zinc-plated-sku-63710100/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 20 x 40 right handed steel zinc-plated SKU: 63702000](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-20-x-40-right-handed-steel-zinc-plated-sku-63702000/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 16 x 64 right handed fine thread M16x1,5 steel zinc-plated SKU: 63701600F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-16-x-64-right-handed-fine-thread-m16x15-steel-zinc-plated-sku-63701600f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 16 x 64 right handed steel zinc-plated SKU: 63701600](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-16-x-64-right-handed-steel-zinc-plated-sku-63701600/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 16 x 32 right handed fine thread M16x1,5 steel zinc-plated SKU: 63701500F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-16-x-32-right-handed-fine-thread-m16x15-steel-zinc-plated-sku-63701500f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 16 x 32 right handed steel zinc-plated SKU: 63701500](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-16-x-32-right-handed-steel-zinc-plated-sku-63701500/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 14 x 56 right handed fine thread M14x1,5 steel zinc-plated SKU: 63701400F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-14-x-56-right-handed-fine-thread-m14x15-steel-zinc-plated-sku-63701400f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 14 x 56 right handed steel zinc-plated SKU: 63701400](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-14-x-56-right-handed-steel-zinc-plated-sku-63701400/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 14 x 28 right handed fine thread M14x1,5 steel zinc-plated SKU: 63701300F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-14-x-28-right-handed-fine-thread-m14x15-steel-zinc-plated-sku-63701300f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 14 x 28 right handed steel zinc-plated SKU: 63701300](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-14-x-28-right-handed-steel-zinc-plated-sku-63701300/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 12 x 48 right handed fine thread M12x1,25 steel zinc-plated SKU: 63701200F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-12-x-48-right-handed-fine-thread-m12x125-steel-zinc-plated-sku-63701200f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 12 x 48 right handed steel zinc-plated SKU: 63701200](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-12-x-48-right-handed-steel-zinc-plated-sku-63701200/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 12 x 24 right handed fine thread M12x1,25 steel zinc-plated SKU: 63701100F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-12-x-24-right-handed-fine-thread-m12x125-steel-zinc-plated-sku-63701100f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 12 x 24 right handed steel zinc-plated SKU: 63701100](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-12-x-24-right-handed-steel-zinc-plated-sku-63701100/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 10 x 40 right handed fine thread M10x1,25 steel zinc-plated SKU: 63701000F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-10-x-40-right-handed-fine-thread-m10x125-steel-zinc-plated-sku-63701000f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 10 x 40 right handed steel zinc-plated SKU: 63701000](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-10-x-40-right-handed-steel-zinc-plated-sku-63701000/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 10 x 20 right handed fine thread M10x1,25 steel zinc-plated SKU: 63700900F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-10-x-20-right-handed-fine-thread-m10x125-steel-zinc-plated-sku-63700900f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 10 x 20 right handed steel zinc-plated SKU: 63700900](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-10-x-20-right-handed-steel-zinc-plated-sku-63700900/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 8 x 32 right handed fine thread M8x1 steel zinc-plated SKU: 63700800F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-8-x-32-right-handed-fine-thread-m8x1-steel-zinc-plated-sku-63700800f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 8 x 32 right handed steel zinc-plated SKU: 63700800](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-8-x-32-right-handed-steel-zinc-plated-sku-63700800/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 8 x 16 right handed fine thread M8x1 steel zinc-plated SKU: 63700700F](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-8-x-16-right-handed-fine-thread-m8x1-steel-zinc-plated-sku-63700700f/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 8 x 16 right handed steel zinc-plated SKU: 63700700](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-8-x-16-right-handed-steel-zinc-plated-sku-63700700/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 6 x 24 right handed steel zinc-plated SKU: 63700600](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-6-x-24-right-handed-steel-zinc-plated-sku-63700600/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 6 x 12 right handed steel zinc-plated SKU: 63700500](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-6-x-12-right-handed-steel-zinc-plated-sku-63700500/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 5 x 20 right handed steel zinc-plated SKU: 63700400](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-5-x-20-right-handed-steel-zinc-plated-sku-63700400/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 5 x 10 right handed steel zinc-plated SKU: 63700300](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-5-x-10-right-handed-steel-zinc-plated-sku-63700300/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 4 x 16 right handed steel zinc-plated SKU: 63700200](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-4-x-16-right-handed-steel-zinc-plated-sku-63700200/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Clevis joint DIN 71752 with split pin size 4 x 8 right handed steel zinc-plated SKU: 63700100](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-4-x-8-right-handed-steel-zinc-plated-sku-63700100/): Material: Steel zinc-plated. Design A: with split pin. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Gabelkopf mit ES-Bolzen als Gabelgelenk verwendbar. * Größe 20 ist nicht in der DIN enthalten. - [Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 left with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699734](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-19-thread-m14x1-5-left-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699734/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 16 thread M10 left with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699730](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-16-thread-m10-left-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699730/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 13 thread M8 left with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699728](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-13-thread-m8-left-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699728/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 10 thread M6 left with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699726](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-10-thread-m6-left-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699726/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 8 thread M5 left with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699725](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-8-thread-m5-left-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699725/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 left with nut stainless steel 1.4301 SKU: 63699714](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-19-thread-m14x1-5-left-with-nut-stainless-steel-1-4301-sku-63699714/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 16 thread M10 left with nut stainless steel 1.4301 SKU: 63699710](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-16-thread-m10-left-with-nut-stainless-steel-1-4301-sku-63699710/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 13 thread M8 left with nut stainless steel 1.4301 SKU: 63699708](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-13-thread-m8-left-with-nut-stainless-steel-1-4301-sku-63699708/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 10 thread M6 left with nut stainless steel 1.4301 SKU: 63699706](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-10-thread-m6-left-with-nut-stainless-steel-1-4301-sku-63699706/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 8 thread M5 left with nut stainless steel 1.4301 SKU: 63699705](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-8-thread-m5-left-with-nut-stainless-steel-1-4301-sku-63699705/): Material: Stainless steel 1.4301 (AISI 304). With threaded bolt and hexagon nut. Form CS: With circlip. Thread: Gewindeausführung rechts = right handed thread in the socket. Gewindeausführung links = left handed thread in the socket, marked with a circumferential groove. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 right with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699634](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-19-thread-m14x1-5-right-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699634/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 16 thread M10 right with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699630](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-16-thread-m10-right-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699630/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 13 thread M8 right with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699628](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-13-thread-m8-right-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699628/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Angle joint DIN 71802 type CS with safety circlip size 10 thread M6 right with nut stainless steel 1.4301 with mounted sealing cap SKU: 63699626](https://maedler.in/product/angle-joint-din-71802-type-cs-with-safety-circlip-size-10-thread-m6-right-with-nut-stainless-steel-1-4301-with-mounted-sealing-cap-sku-63699626/): Material: Stainless steel 1.4301 (AISI 304). With mounted sealing cap from neopren, black. Design CS: With threaded bolt, hexagon nut and circlip. Right = Right-hand thread in the socket. Left = Left-hand thread in the socket. * Pivoting angle reduced by circlip. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23195250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23195250/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23195245](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23195245/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23195240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23195240/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23195236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23195236/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23195235](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23195235/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23195232](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23195232/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23195230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23195230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23195228](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23195228/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23195225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23195225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23195224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23195224/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23195220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23195220/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23195218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23195218/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 120 teeth tooth width 20mm outside diameter 244mm SKU: 23195120](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-120-teeth-tooth-width-20mm-outside-diameter-244mm-sku-23195120/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 100 teeth tooth width 20mm outside diameter 204mm SKU: 23195100](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-100-teeth-tooth-width-20mm-outside-diameter-204mm-sku-23195100/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 90 teeth tooth width 20mm outside diameter 184mm SKU: 23195090](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-90-teeth-tooth-width-20mm-outside-diameter-184mm-sku-23195090/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23195080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23195080/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 72 teeth tooth width 20mm outside diameter 148mm SKU: 23195072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-72-teeth-tooth-width-20mm-outside-diameter-148mm-sku-23195072/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 70 teeth tooth width 20mm outside diameter 144mm SKU: 23195070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-70-teeth-tooth-width-20mm-outside-diameter-144mm-sku-23195070/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 64 teeth tooth width 20mm outside diameter 132mm SKU: 23195064](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-64-teeth-tooth-width-20mm-outside-diameter-132mm-sku-23195064/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23195060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23195060/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 56 teeth tooth width 20mm outside diameter 116mm SKU: 23195056](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-56-teeth-tooth-width-20mm-outside-diameter-116mm-sku-23195056/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23195050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23195050/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 23195048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23195048/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23195045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23195045/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23195040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23195040/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23195036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23195036/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23195035](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23195035/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23195032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23195032/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23195030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23195030/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23195028](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23195028/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23195025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23195025/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23195024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23195024/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23195020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23195020/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23195018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23195018/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 2 60 teeth tooth width 20mm outside diameter 124mm teeth induction hardened SKU: 23188160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-teeth-induction-hardened-sku-23188160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 50 teeth tooth width 20mm outside diameter 104mm teeth induction hardened SKU: 23188150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-teeth-induction-hardened-sku-23188150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 48 teeth tooth width 20mm outside diameter 100mm teeth induction hardened SKU: 23188148](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-teeth-induction-hardened-sku-23188148/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 45 teeth tooth width 20mm outside diameter 94mm teeth induction hardened SKU: 23188145](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-teeth-induction-hardened-sku-23188145/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 40 teeth tooth width 20mm outside diameter 84mm teeth induction hardened SKU: 23188140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-teeth-induction-hardened-sku-23188140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 36 teeth tooth width 20mm outside diameter 76mm teeth induction hardened SKU: 23188136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-teeth-induction-hardened-sku-23188136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 32 teeth tooth width 20mm outside diameter 68mm teeth induction hardened SKU: 23188132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-teeth-induction-hardened-sku-23188132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 30 teeth tooth width 20mm outside diameter 64mm teeth induction hardened SKU: 23188130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-teeth-induction-hardened-sku-23188130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 28 teeth tooth width 20mm outside diameter 60mm teeth induction hardened SKU: 23188128](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-teeth-induction-hardened-sku-23188128/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 25 teeth tooth width 20mm outside diameter 54mm teeth induction hardened SKU: 23188125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-teeth-induction-hardened-sku-23188125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 24 teeth tooth width 20mm outside diameter 52mm teeth induction hardened SKU: 23188124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-teeth-induction-hardened-sku-23188124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 22 teeth tooth width 20mm outside diameter 48mm teeth induction hardened SKU: 23188122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-22-teeth-tooth-width-20mm-outside-diameter-48mm-teeth-induction-hardened-sku-23188122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 20 teeth tooth width 20mm outside diameter 44mm teeth induction hardened SKU: 23188120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-teeth-induction-hardened-sku-23188120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 18 teeth tooth width 20mm outside diameter 40mm teeth induction hardened SKU: 23188118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-teeth-induction-hardened-sku-23188118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 16 teeth tooth width 20mm outside diameter 36mm teeth induction hardened SKU: 23188116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-16-teeth-tooth-width-20mm-outside-diameter-36mm-teeth-induction-hardened-sku-23188116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 15 teeth tooth width 20mm outside diameter 34mm teeth induction hardened SKU: 23188115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-15-teeth-tooth-width-20mm-outside-diameter-34mm-teeth-induction-hardened-sku-23188115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 14 teeth tooth width 20mm outside diameter 32mm teeth induction hardened SKU: 23188114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-14-teeth-tooth-width-20mm-outside-diameter-32mm-teeth-induction-hardened-sku-23188114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 13 teeth tooth width 20mm outside diameter 30mm teeth induction hardened SKU: 23188113](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-13-teeth-tooth-width-20mm-outside-diameter-30mm-teeth-induction-hardened-sku-23188113/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2 12 teeth tooth width 20mm outside diameter 28mm teeth induction hardened SKU: 23188112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-12-teeth-tooth-width-20mm-outside-diameter-28mm-teeth-induction-hardened-sku-23188112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23155280](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23155280/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23155260](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23155260/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23155250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23155250/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23155245](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23155245/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23155240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23155240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23155236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23155236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23155232](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23155232/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23155230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23155230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23155225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23155225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23155224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23155224/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23155220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23155220/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23155218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23155218/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 120 teeth tooth width 20mm outside diameter 244mm SKU: 23155120](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-120-teeth-tooth-width-20mm-outside-diameter-244mm-sku-23155120/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 100 teeth tooth width 20mm outside diameter 204mm SKU: 23155100](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-100-teeth-tooth-width-20mm-outside-diameter-204mm-sku-23155100/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 90 teeth tooth width 20mm outside diameter 184mm SKU: 23155090](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-90-teeth-tooth-width-20mm-outside-diameter-184mm-sku-23155090/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23155080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23155080/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 72 teeth tooth width 20mm outside diameter 148mm SKU: 23155072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-72-teeth-tooth-width-20mm-outside-diameter-148mm-sku-23155072/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 70 teeth tooth width 20mm outside diameter 144mm SKU: 23155070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-70-teeth-tooth-width-20mm-outside-diameter-144mm-sku-23155070/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 64 teeth tooth width 20mm outside diameter 132mm SKU: 23155064](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-64-teeth-tooth-width-20mm-outside-diameter-132mm-sku-23155064/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23155060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23155060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 56 teeth tooth width 20mm outside diameter 116mm SKU: 23155056](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-56-teeth-tooth-width-20mm-outside-diameter-116mm-sku-23155056/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23155050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23155050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 23155048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23155048/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23155045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23155045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23155040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23155040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23155036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23155036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23155035](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23155035/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 32 teeth tooth width 20mm outside diameter 68mm SKU: 23155032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-32-teeth-tooth-width-20mm-outside-diameter-68mm-sku-23155032/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23155030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23155030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23155028](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23155028/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23155025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23155025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23155024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23155024/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23155020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23155020/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23155018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23155018/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Precision spur gear made of steel 16MnCr5 module 1.5 60 teeth bore 25mm hardened and ground outside diameter 93mm SKU: 22886025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-60-teeth-bore-25mm-hardened-and-ground-outside-diameter-93mm-sku-22886025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 60 teeth bore 15mm hardened and ground outside diameter 93mm SKU: 22886000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-60-teeth-bore-15mm-hardened-and-ground-outside-diameter-93mm-sku-22886000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 50 teeth bore 25mm hardened and ground outside diameter 78mm SKU: 22885025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-50-teeth-bore-25mm-hardened-and-ground-outside-diameter-78mm-sku-22885025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 50 teeth bore 15mm hardened and ground outside diameter 78mm SKU: 22885000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-50-teeth-bore-15mm-hardened-and-ground-outside-diameter-78mm-sku-22885000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 48 teeth bore 20mm hardened and ground outside diameter 75mm SKU: 22884820](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-48-teeth-bore-20mm-hardened-and-ground-outside-diameter-75mm-sku-22884820/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 48 teeth bore 15mm hardened and ground outside diameter 75mm SKU: 22884800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-48-teeth-bore-15mm-hardened-and-ground-outside-diameter-75mm-sku-22884800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 40 teeth bore 20mm hardened and ground outside diameter 63mm SKU: 22884020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-40-teeth-bore-20mm-hardened-and-ground-outside-diameter-63mm-sku-22884020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 40 teeth bore 12mm hardened and ground outside diameter 63mm SKU: 22884000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-40-teeth-bore-12mm-hardened-and-ground-outside-diameter-63mm-sku-22884000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 36 teeth bore 20mm hardened and ground outside diameter 57mm SKU: 22883620](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-36-teeth-bore-20mm-hardened-and-ground-outside-diameter-57mm-sku-22883620/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 36 teeth bore 12mm hardened and ground outside diameter 57mm SKU: 22883600](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-36-teeth-bore-12mm-hardened-and-ground-outside-diameter-57mm-sku-22883600/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 30 teeth bore 15mm hardened and ground outside diameter 48mm SKU: 22883015](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-30-teeth-bore-15mm-hardened-and-ground-outside-diameter-48mm-sku-22883015/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 30 teeth bore 12mm hardened and ground outside diameter 48mm SKU: 22883000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-30-teeth-bore-12mm-hardened-and-ground-outside-diameter-48mm-sku-22883000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 1.5 25 teeth bore 15mm hardened and ground outside diameter 40.5mm SKU: 22882515](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-1-5-25-teeth-bore-15mm-hardened-and-ground-outside-diameter-40-5mm-sku-22882515/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Clevis joint DIN 71752 with circlip size 6 x 24 right handed stainless steel 1.4301 SKU: 63799006](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-6-x-24-right-handed-stainless-steel-1-4301-sku-63799006/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 6 x 12 right handed stainless steel 1.4301 SKU: 63799005](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-6-x-12-right-handed-stainless-steel-1-4301-sku-63799005/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 5 x 20 right handed stainless steel 1.4301 SKU: 63799004](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-5-x-20-right-handed-stainless-steel-1-4301-sku-63799004/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 5 x 10 right handed stainless steel 1.4301 SKU: 63799003](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-5-x-10-right-handed-stainless-steel-1-4301-sku-63799003/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 4 x 16 right handed stainless steel 1.4301 SKU: 63799002](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-4-x-16-right-handed-stainless-steel-1-4301-sku-63799002/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 4 x 8 right handed stainless steel 1.4301 SKU: 63799001](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-4-x-8-right-handed-stainless-steel-1-4301-sku-63799001/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Bolt set with retainer SL ø16mm; for clevises size 16x32 and 16x64 SKU: 63791500](https://maedler.in/product/bolt-set-with-retainer-sl-o16mm-for-clevises-size-16x32-and-16x64-sku-63791500/): Material: Steel zinc-plated. Bolt with SL retainer. The set exists from one bolt and a fitting SL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. SL retainers are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening. - [Bolt set with retainer SL ø14mm; for clevises size 14x28 and 14x56 SKU: 63791300](https://maedler.in/product/bolt-set-with-retainer-sl-o14mm-for-clevises-size-14x28-and-14x56-sku-63791300/): Material: Steel zinc-plated. Bolt with SL retainer. The set exists from one bolt and a fitting SL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. SL retainers are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening. - [Bolt set with retainer SL ø12mm; for clevises size 12x24 and 12x48 SKU: 63791100](https://maedler.in/product/bolt-set-with-retainer-sl-o12mm-for-clevises-size-12x24-and-12x48-sku-63791100/): Material: Steel zinc-plated. Bolt with SL retainer. The set exists from one bolt and a fitting SL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. SL retainers are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening. - [Bolt set with retainer SL ø10mm; for clevises size 10x20 and 10x40 SKU: 63790900](https://maedler.in/product/bolt-set-with-retainer-sl-o10mm-for-clevises-size-10x20-and-10x40-sku-63790900/): Material: Steel zinc-plated. Bolt with SL retainer. The set exists from one bolt and a fitting SL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. SL retainers are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening. - [Bolt set with retainer SL ø8mm; for clevises size 8x16 and 8x32 SKU: 63790700](https://maedler.in/product/bolt-set-with-retainer-sl-o8mm-for-clevises-size-8x16-and-8x32-sku-63790700/): Material: Steel zinc-plated. Bolt with SL retainer. The set exists from one bolt and a fitting SL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. SL retainers are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening. - [Bolt set with retainer SL ø6mm; for clevises size 6x12 and 6x24 SKU: 63790500](https://maedler.in/product/bolt-set-with-retainer-sl-o6mm-for-clevises-size-6x12-and-6x24-sku-63790500/): Material: Steel zinc-plated. Bolt with SL retainer. The set exists from one bolt and a fitting SL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. SL retainers are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening. - [Bolt set with retainer SL ø5mm; for clevises size 5x10 and 5x20 SKU: 63790300](https://maedler.in/product/bolt-set-with-retainer-sl-o5mm-for-clevises-size-5x10-and-5x20-sku-63790300/): Material: Steel zinc-plated. Bolt with SL retainer. The set exists from one bolt and a fitting SL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. SL retainers are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening. - [Bolt set with retainer SL ø4mm; for clevises size 4x8 and 4x16 SKU: 63790100](https://maedler.in/product/bolt-set-with-retainer-sl-o4mm-for-clevises-size-4x8-and-4x16-sku-63790100/): Material: Steel zinc-plated. Bolt with SL retainer. The set exists from one bolt and a fitting SL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. SL retainers are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening. - [Bolt set with retainer KL ø16mm; for clevises size 16x32 and 16x64 SKU: 63781500](https://maedler.in/product/bolt-set-with-retainer-kl-o16mm-for-clevises-size-16x32-and-16x64-sku-63781500/): Material: Steel zinc-plated. Bolt with KL retainer. The set exists from one bolt and a fitting KL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. KL retainer can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove. - [Bolt set with retainer KL ø14mm; for clevises size 14x28 and 14x56 SKU: 63781300](https://maedler.in/product/bolt-set-with-retainer-kl-o14mm-for-clevises-size-14x28-and-14x56-sku-63781300/): Material: Steel zinc-plated. Bolt with KL retainer. The set exists from one bolt and a fitting KL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. KL retainer can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove. - [Bolt set with retainer KL ø12mm; for clevises size 12x24 and 12x48 SKU: 63781100](https://maedler.in/product/bolt-set-with-retainer-kl-o12mm-for-clevises-size-12x24-and-12x48-sku-63781100/): Material: Steel zinc-plated. Bolt with KL retainer. The set exists from one bolt and a fitting KL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. KL retainer can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove. - [Bolt set with retainer KL ø10mm; for clevises size 10x20 and 10x40 SKU: 63780900](https://maedler.in/product/bolt-set-with-retainer-kl-o10mm-for-clevises-size-10x20-and-10x40-sku-63780900/): Material: Steel zinc-plated. Bolt with KL retainer. The set exists from one bolt and a fitting KL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. KL retainer can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove. - [Bolt set with retainer KL ø8mm; for clevises size 8x16 and 8x32 SKU: 63780700](https://maedler.in/product/bolt-set-with-retainer-kl-o8mm-for-clevises-size-8x16-and-8x32-sku-63780700/): Material: Steel zinc-plated. Bolt with KL retainer. The set exists from one bolt and a fitting KL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. KL retainer can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove. - [Bolt set with retainer KL ø6mm; for clevises size 6x12 and 6x24 SKU: 63780500](https://maedler.in/product/bolt-set-with-retainer-kl-o6mm-for-clevises-size-6x12-and-6x24-sku-63780500/): Material: Steel zinc-plated. Bolt with KL retainer. The set exists from one bolt and a fitting KL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. KL retainer can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove. - [Bolt set with retainer KL ø5mm; for clevises size 5x10 and 5x20 SKU: 63780300](https://maedler.in/product/bolt-set-with-retainer-kl-o5mm-for-clevises-size-5x10-and-5x20-sku-63780300/): Material: Steel zinc-plated. Bolt with KL retainer. The set exists from one bolt and a fitting KL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. KL retainer can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove. - [Bolt set with retainer KL ø4mm; for clevises size 4x8 and 4x16 SKU: 63780100](https://maedler.in/product/bolt-set-with-retainer-kl-o4mm-for-clevises-size-4x8-and-4x16-sku-63780100/): Material: Steel zinc-plated. Bolt with KL retainer. The set exists from one bolt and a fitting KL retainer. It can be used with all clevises according to DIN 71752 or other clevises with dimensions like DIN. KL retainer can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove. - [Clevis joint DIN 71752 with split pin size 16 x 32 e x ternal thread M16 right handed steel zinc-plated SKU: 63771500](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-16-x-32-e-x-ternal-thread-m16-right-handed-steel-zinc-plated-sku-63771500/): Material: steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint DIN 71752 with split pin size 14 x 28 e x ternal thread M14 right handed steel zinc-plated SKU: 63771300](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-14-x-28-e-x-ternal-thread-m14-right-handed-steel-zinc-plated-sku-63771300/): Material: steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint DIN 71752 with split pin size 12 x 24 e x ternal thread M12 right handed steel zinc-plated SKU: 63771100](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-12-x-24-e-x-ternal-thread-m12-right-handed-steel-zinc-plated-sku-63771100/): Material: steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint DIN 71752 with split pin size 10 x 20 e x ternal thread M10 right handed steel zinc-plated SKU: 63770900](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-10-x-20-e-x-ternal-thread-m10-right-handed-steel-zinc-plated-sku-63770900/): Material: steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint DIN 71752 with split pin size 8 x 16 e x ternal thread M8 right handed steel zinc-plated SKU: 63770700](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-8-x-16-e-x-ternal-thread-m8-right-handed-steel-zinc-plated-sku-63770700/): Material: steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint DIN 71752 with split pin size 6 x 12 e x ternal thread M6 right handed steel zinc-plated SKU: 63770500](https://maedler.in/product/clevis-joint-din-71752-with-split-pin-size-6-x-12-e-x-ternal-thread-m6-right-handed-steel-zinc-plated-sku-63770500/): Material: steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 16 x 32 type SL right handed aluminum black anodized SKU: 63766415](https://maedler.in/product/clevis-joint-similar-din-71752-size-16-x-32-type-sl-right-handed-aluminum-black-anodized-sku-63766415/): Material: Clevis and bolt aluminium, anodized black.With SL-Retainer from steel, bright zinc plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 14 x 28 type SL right handed aluminum black anodized SKU: 63766413](https://maedler.in/product/clevis-joint-similar-din-71752-size-14-x-28-type-sl-right-handed-aluminum-black-anodized-sku-63766413/): Material: Clevis and bolt aluminium, anodized black.With SL-Retainer from steel, bright zinc plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 12 x 24 type SL right handed aluminum black anodized SKU: 63766411](https://maedler.in/product/clevis-joint-similar-din-71752-size-12-x-24-type-sl-right-handed-aluminum-black-anodized-sku-63766411/): Material: Clevis and bolt aluminium, anodized black.With SL-Retainer from steel, bright zinc plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 10 x 20 type SL right handed aluminum black anodized SKU: 63766409](https://maedler.in/product/clevis-joint-similar-din-71752-size-10-x-20-type-sl-right-handed-aluminum-black-anodized-sku-63766409/): Material: Clevis and bolt aluminium, anodized black.With SL-Retainer from steel, bright zinc plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 8 x 16 type SL right handed aluminum black anodized SKU: 63766407](https://maedler.in/product/clevis-joint-similar-din-71752-size-8-x-16-type-sl-right-handed-aluminum-black-anodized-sku-63766407/): Material: Clevis and bolt aluminium, anodized black.With SL-Retainer from steel, bright zinc plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 6 x 12 type SL right handed aluminum black anodized SKU: 63766405](https://maedler.in/product/clevis-joint-similar-din-71752-size-6-x-12-type-sl-right-handed-aluminum-black-anodized-sku-63766405/): Material: Clevis and bolt aluminium, anodized black.With SL-Retainer from steel, bright zinc plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 5 x 10 type SL right handed aluminum black anodized SKU: 63766403](https://maedler.in/product/clevis-joint-similar-din-71752-size-5-x-10-type-sl-right-handed-aluminum-black-anodized-sku-63766403/): Material: Clevis and bolt aluminium, anodized black.With SL-Retainer from steel, bright zinc plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 4 x 16 type SL right handed aluminum black anodized SKU: 63766402](https://maedler.in/product/clevis-joint-similar-din-71752-size-4-x-16-type-sl-right-handed-aluminum-black-anodized-sku-63766402/): Material: Clevis and bolt aluminium, anodized black.With SL-Retainer from steel, bright zinc plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 4 x 8 type SL right handed aluminum black anodized SKU: 63766401](https://maedler.in/product/clevis-joint-similar-din-71752-size-4-x-8-type-sl-right-handed-aluminum-black-anodized-sku-63766401/): Material: Clevis and bolt aluminium, anodized black.With SL-Retainer from steel, bright zinc plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis similar DIN 71752 size 16 x 32 right handed aluminum black anodized SKU: 63766215](https://maedler.in/product/clevis-similar-din-71752-size-16-x-32-right-handed-aluminum-black-anodized-sku-63766215/): Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis similar DIN 71752 size 14 x 28 right handed aluminum black anodized SKU: 63766213](https://maedler.in/product/clevis-similar-din-71752-size-14-x-28-right-handed-aluminum-black-anodized-sku-63766213/): Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis similar DIN 71752 size 12 x 24 right handed aluminum black anodized SKU: 63766211](https://maedler.in/product/clevis-similar-din-71752-size-12-x-24-right-handed-aluminum-black-anodized-sku-63766211/): Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis similar DIN 71752 size 10 x 20 right handed aluminum black anodized SKU: 63766209](https://maedler.in/product/clevis-similar-din-71752-size-10-x-20-right-handed-aluminum-black-anodized-sku-63766209/): Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis similar DIN 71752 size 8 x 16 right handed aluminum black anodized SKU: 63766207](https://maedler.in/product/clevis-similar-din-71752-size-8-x-16-right-handed-aluminum-black-anodized-sku-63766207/): Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis similar DIN 71752 size 6 x 12 right handed aluminum black anodized SKU: 63766205](https://maedler.in/product/clevis-similar-din-71752-size-6-x-12-right-handed-aluminum-black-anodized-sku-63766205/): Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis similar DIN 71752 size 5 x 10 right handed aluminum black anodized SKU: 63766203](https://maedler.in/product/clevis-similar-din-71752-size-5-x-10-right-handed-aluminum-black-anodized-sku-63766203/): Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis similar DIN 71752 size 4 x 16 right handed aluminum black anodized SKU: 63766202](https://maedler.in/product/clevis-similar-din-71752-size-4-x-16-right-handed-aluminum-black-anodized-sku-63766202/): Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis similar DIN 71752 size 4 x 8 right handed aluminum black anodized SKU: 63766201](https://maedler.in/product/clevis-similar-din-71752-size-4-x-8-right-handed-aluminum-black-anodized-sku-63766201/): Material: aluminium, anodized black.Without bolt. To be used with ES bolt or customer¿s bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 16 x 32 type KL right handed aluminum black anodized SKU: 63766015](https://maedler.in/product/clevis-joint-similar-din-71752-size-16-x-32-type-kl-right-handed-aluminum-black-anodized-sku-63766015/): Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 14 x 28 type KL right handed aluminum black anodized SKU: 63766013](https://maedler.in/product/clevis-joint-similar-din-71752-size-14-x-28-type-kl-right-handed-aluminum-black-anodized-sku-63766013/): Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 12 x 24 type KL right handed aluminum black anodized SKU: 63766011](https://maedler.in/product/clevis-joint-similar-din-71752-size-12-x-24-type-kl-right-handed-aluminum-black-anodized-sku-63766011/): Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 10 x 20 type KL right handed aluminum black anodized SKU: 63766009](https://maedler.in/product/clevis-joint-similar-din-71752-size-10-x-20-type-kl-right-handed-aluminum-black-anodized-sku-63766009/): Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 8 x 16 type KL right handed aluminum black anodized SKU: 63766007](https://maedler.in/product/clevis-joint-similar-din-71752-size-8-x-16-type-kl-right-handed-aluminum-black-anodized-sku-63766007/): Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 6 x 12 type KL right handed aluminum black anodized SKU: 63766005](https://maedler.in/product/clevis-joint-similar-din-71752-size-6-x-12-type-kl-right-handed-aluminum-black-anodized-sku-63766005/): Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 5 x 10 type KL right handed aluminum black anodized SKU: 63766003](https://maedler.in/product/clevis-joint-similar-din-71752-size-5-x-10-type-kl-right-handed-aluminum-black-anodized-sku-63766003/): Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 4 x 16 type KL right handed aluminum black anodized SKU: 63766002](https://maedler.in/product/clevis-joint-similar-din-71752-size-4-x-16-type-kl-right-handed-aluminum-black-anodized-sku-63766002/): Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed. - [Clevis joint similar DIN 71752 size 4 x 8 type KL right handed aluminum black anodized SKU: 63766001](https://maedler.in/product/clevis-joint-similar-din-71752-size-4-x-8-type-kl-right-handed-aluminum-black-anodized-sku-63766001/): Material: Clevis and bolt aluminium, anodized black.With KL-Retainer from steel, bright zinc plated.Thread: Gewindeausführung rechts = thread right-handed. - [Mating piece for clevis joint DIN 71752 size 16 x 32 internal thread M16 steel zinc plated SKU: 63761500](https://maedler.in/product/mating-piece-for-clevis-joint-din-71752-size-16-x-32-internal-thread-m16-steel-zinc-plated-sku-63761500/): Material: steel zinc-plated. Can be used with clevis joints DIN 71751. For using with clevis DIN 71752 you need an ES-bolt or other connection bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Mating piece for clevis joint DIN 71752 size 14 x 28 internal thread M14 steel zinc plated SKU: 63761300](https://maedler.in/product/mating-piece-for-clevis-joint-din-71752-size-14-x-28-internal-thread-m14-steel-zinc-plated-sku-63761300/): Material: steel zinc-plated. Can be used with clevis joints DIN 71751. For using with clevis DIN 71752 you need an ES-bolt or other connection bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Mating piece for clevis joint DIN 71752 size 12 x 24 internal thread M12 steel zinc plated SKU: 63761100](https://maedler.in/product/mating-piece-for-clevis-joint-din-71752-size-12-x-24-internal-thread-m12-steel-zinc-plated-sku-63761100/): Material: steel zinc-plated. Can be used with clevis joints DIN 71751. For using with clevis DIN 71752 you need an ES-bolt or other connection bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Mating piece for clevis joint DIN 71752 size 10x 20 internal thread M10 steel zinc plated SKU: 63760900](https://maedler.in/product/mating-piece-for-clevis-joint-din-71752-size-10x-20-internal-thread-m10-steel-zinc-plated-sku-63760900/): Material: steel zinc-plated. Can be used with clevis joints DIN 71751. For using with clevis DIN 71752 you need an ES-bolt or other connection bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Mating piece for clevis joint DIN 71752 size 8 x 16 internal thread M8 steel zinc plated SKU: 63760700](https://maedler.in/product/mating-piece-for-clevis-joint-din-71752-size-8-x-16-internal-thread-m8-steel-zinc-plated-sku-63760700/): Material: steel zinc-plated. Can be used with clevis joints DIN 71751. For using with clevis DIN 71752 you need an ES-bolt or other connection bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Mating piece for clevis joint DIN 71752 size 6 x 12 internal thread M6 steel zinc plated SKU: 63760500](https://maedler.in/product/mating-piece-for-clevis-joint-din-71752-size-6-x-12-internal-thread-m6-steel-zinc-plated-sku-63760500/): Material: steel zinc-plated. Can be used with clevis joints DIN 71751. For using with clevis DIN 71752 you need an ES-bolt or other connection bolt. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis GD with rotating shaft similar DIN 71752 size 12x24 left handed steel zinc-plated SKU: 63755311](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-12x24-left-handed-steel-zinc-plated-sku-63755311/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 10x20 left handed steel zinc-plated SKU: 63755309](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-10x20-left-handed-steel-zinc-plated-sku-63755309/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 8x16 left handed steel zinc-plated SKU: 63755307](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-8x16-left-handed-steel-zinc-plated-sku-63755307/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 6x12 left handed steel zinc-plated SKU: 63755305](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-6x12-left-handed-steel-zinc-plated-sku-63755305/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 12x48 right handed steel zinc-plated SKU: 63755212](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-12x48-right-handed-steel-zinc-plated-sku-63755212/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 12x24 right handed steel zinc-plated SKU: 63755211](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-12x24-right-handed-steel-zinc-plated-sku-63755211/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 10x40 right handed steel zinc-plated SKU: 63755210](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-10x40-right-handed-steel-zinc-plated-sku-63755210/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 10x20 right handed steel zinc-plated SKU: 63755209](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-10x20-right-handed-steel-zinc-plated-sku-63755209/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 8x32 right handed steel zinc-plated SKU: 63755208](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-8x32-right-handed-steel-zinc-plated-sku-63755208/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 8x16 right handed steel zinc-plated SKU: 63755207](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-8x16-right-handed-steel-zinc-plated-sku-63755207/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 6x24 right handed steel zinc-plated SKU: 63755206](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-6x24-right-handed-steel-zinc-plated-sku-63755206/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 6x12 right handed steel zinc-plated SKU: 63755205](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-6x12-right-handed-steel-zinc-plated-sku-63755205/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 5x20 right handed steel zinc-plated SKU: 63755204](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-5x20-right-handed-steel-zinc-plated-sku-63755204/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis GD with rotating shaft similar DIN 71752 size 5x10 right handed steel zinc-plated SKU: 63755203](https://maedler.in/product/clevis-gd-with-rotating-shaft-similar-din-71752-size-5x10-right-handed-steel-zinc-plated-sku-63755203/): Material: Steel zinc-plated. Design GD: with rotating shaft, without bolt. Thread: Gewindeausführung rechts = thread right-handed. Gewindeausführung links = thread left-handed. Clevises GD have the same dimensions like DIN 71752, but the shaft is rotatable. So, there is no need to adjust the radila position when mounting. The rotating shaft will compensate axial movements caused by axes or levers which are not accurately in line or by Bowden cables. With a bolt set KL or SL, a clevis can get competed to a clevis joint. When monting, all movable parts and contact surfaces should be lubricated. - [Clevis DIN 71752 size 16 x 32 external thread M16 right handed steel zinc-plated SKU: 63751500](https://maedler.in/product/clevis-din-71752-size-16-x-32-external-thread-m16-right-handed-steel-zinc-plated-sku-63751500/): Material: Steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis DIN 71752 size 14 x 28 external thread M14 right handed steel zinc-plated SKU: 63751300](https://maedler.in/product/clevis-din-71752-size-14-x-28-external-thread-m14-right-handed-steel-zinc-plated-sku-63751300/): Material: Steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis DIN 71752 size 12 x 24 external thread M12 right handed steel zinc-plated SKU: 63751100](https://maedler.in/product/clevis-din-71752-size-12-x-24-external-thread-m12-right-handed-steel-zinc-plated-sku-63751100/): Material: Steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis DIN 71752 size 10 x 20 external thread M10 right handed steel zinc-plated SKU: 63750900](https://maedler.in/product/clevis-din-71752-size-10-x-20-external-thread-m10-right-handed-steel-zinc-plated-sku-63750900/): Material: Steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis DIN 71752 size 8 x 16 external thread M8 right handed steel zinc-plated SKU: 63750700](https://maedler.in/product/clevis-din-71752-size-8-x-16-external-thread-m8-right-handed-steel-zinc-plated-sku-63750700/): Material: Steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [Clevis DIN 71752 size 6 x 12 external thread M6 right handed steel zinc-plated SKU: 63750500](https://maedler.in/product/clevis-din-71752-size-6-x-12-external-thread-m6-right-handed-steel-zinc-plated-sku-63750500/): Material: Steel zinc-plated. Thread: Gewindeausführung rechts = thread right-handed. - [ES-bolt for Clevis DIN 71752 size 20 x 40 steel zinc-plated SKU: 63742000](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-20-x-40-steel-zinc-plated-sku-63742000/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 16 x 64 steel zinc-plated SKU: 63741600](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-16-x-64-steel-zinc-plated-sku-63741600/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 16 x 32 steel zinc-plated SKU: 63741500](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-16-x-32-steel-zinc-plated-sku-63741500/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 14 x 56 steel zinc-plated SKU: 63741400](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-14-x-56-steel-zinc-plated-sku-63741400/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 14 x 28 steel zinc-plated SKU: 63741300](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-14-x-28-steel-zinc-plated-sku-63741300/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 12 x 48 steel zinc-plated SKU: 63741200](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-12-x-48-steel-zinc-plated-sku-63741200/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 12 x 24 steel zinc-plated SKU: 63741100](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-12-x-24-steel-zinc-plated-sku-63741100/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 10 x 40 steel zinc-plated SKU: 63741000](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-10-x-40-steel-zinc-plated-sku-63741000/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 10 x 20 steel zinc-plated SKU: 63740900](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-10-x-20-steel-zinc-plated-sku-63740900/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 8 x 32 steel zinc-plated SKU: 63740800](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-8-x-32-steel-zinc-plated-sku-63740800/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 8 x 16 steel zinc-plated SKU: 63740700](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-8-x-16-steel-zinc-plated-sku-63740700/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 6 x 24 steel zinc-plated SKU: 63740600](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-6-x-24-steel-zinc-plated-sku-63740600/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 6 x 12 steel zinc-plated SKU: 63740500](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-6-x-12-steel-zinc-plated-sku-63740500/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 5 x 20 steel zinc-plated SKU: 63740400](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-5-x-20-steel-zinc-plated-sku-63740400/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 5 x 10 steel zinc-plated SKU: 63740300](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-5-x-10-steel-zinc-plated-sku-63740300/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 4 x 16 steel zinc-plated SKU: 63740200](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-4-x-16-steel-zinc-plated-sku-63740200/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [ES-bolt for Clevis DIN 71752 size 4 x 8 steel zinc-plated SKU: 63740100](https://maedler.in/product/es-bolt-for-clevis-din-71752-size-4-x-8-steel-zinc-plated-sku-63740100/): Material: Steel zinc-plated. ES-Standard 01.* Size 20 is not part of the DIN. - [Clevis DIN 71752 size 20 x 40 left handed steel zinc-plated SKU: 63732000](https://maedler.in/product/clevis-din-71752-size-20-x-40-left-handed-steel-zinc-plated-sku-63732000/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 16 x 64 left handed steel zinc-plated SKU: 63731600](https://maedler.in/product/clevis-din-71752-size-16-x-64-left-handed-steel-zinc-plated-sku-63731600/): Material: Steel zinc-plated. Design G: without bolt. With a snap-on-bolt ES or a bolt set KL or SL, a clevis can get completed to a clevis joint. When mounting, all movable parts and contact surfaces should be lubricated. Metric ISO thread: without appendix F. Metric ISO fine thread: with appendix F. Threads: Gewindeausführung rechts = thread right-handed. Gewindeausführung rechts Fein = fine thread right-handed . Gewindeausführung links = thread left-handed. * Size 20 is not part of the DIN. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23295224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23295224/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23295220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23295220/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23295218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23295218/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 80 teeth tooth width 25mm outside diameter 205mm SKU: 23295080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-80-teeth-tooth-width-25mm-outside-diameter-205mm-sku-23295080/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 72 teeth tooth width 25mm outside diameter 185mm SKU: 23295072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-72-teeth-tooth-width-25mm-outside-diameter-185mm-sku-23295072/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 70 teeth tooth width 25mm outside diameter 180mm SKU: 23295070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-70-teeth-tooth-width-25mm-outside-diameter-180mm-sku-23295070/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 23295060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-23295060/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 23295050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-23295050/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 23295048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-23295048/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 45 teeth tooth width 25mm outside diameter 117.5mm SKU: 23295045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-45-teeth-tooth-width-25mm-outside-diameter-117-5mm-sku-23295045/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23295040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23295040/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 36 teeth tooth width 25mm outside diameter 95mm SKU: 23295036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-sku-23295036/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 32 teeth tooth width 25mm outside diameter 85mm SKU: 23295032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-sku-23295032/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23295030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23295030/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23295025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23295025/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23295024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23295024/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23295020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23295020/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23295018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23295018/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23295015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23295015/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 2.5 60 teeth tooth width 25mm outside diameter 155mm teeth induction hardened SKU: 23288160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-teeth-induction-hardened-sku-23288160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 50 teeth tooth width 25mm outside diameter 130mm teeth induction hardened SKU: 23288150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-teeth-induction-hardened-sku-23288150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 40 teeth tooth width 25mm outside diameter 105mm teeth induction hardened SKU: 23288140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-teeth-induction-hardened-sku-23288140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 36 teeth tooth width 25mm outside diameter 95mm teeth induction hardened SKU: 23288136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-teeth-induction-hardened-sku-23288136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 32 teeth tooth width 25mm outside diameter 85mm teeth induction hardened SKU: 23288132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-teeth-induction-hardened-sku-23288132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 30 teeth tooth width 25mm outside diameter 80mm teeth induction hardened SKU: 23288130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-teeth-induction-hardened-sku-23288130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm teeth induction hardened SKU: 23288125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-teeth-induction-hardened-sku-23288125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 24 teeth tooth width 25mm outside diameter 65mm teeth induction hardened SKU: 23288124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-teeth-induction-hardened-sku-23288124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 22 teeth tooth width 25mm outside diameter 60mm teeth induction hardened SKU: 23288122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-22-teeth-tooth-width-25mm-outside-diameter-60mm-teeth-induction-hardened-sku-23288122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 20 teeth tooth width 25mm outside diameter 55mm teeth induction hardened SKU: 23288120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-teeth-induction-hardened-sku-23288120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 18 teeth tooth width 25mm outside diameter 50mm teeth induction hardened SKU: 23288118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-teeth-induction-hardened-sku-23288118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 16 teeth tooth width 25mm outside diameter 45mm teeth induction hardened SKU: 23288116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-16-teeth-tooth-width-25mm-outside-diameter-45mm-teeth-induction-hardened-sku-23288116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm teeth induction hardened SKU: 23288115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-teeth-induction-hardened-sku-23288115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm teeth induction hardened SKU: 23288112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-2-5-12-teeth-tooth-width-25mm-outside-diameter-35mm-teeth-induction-hardened-sku-23288112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23255240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23255240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 36 teeth tooth width 25mm outside diameter 95mm SKU: 23255236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-sku-23255236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23255230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23255230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23255225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23255225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23255224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23255224/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23255220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23255220/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23255215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23255215/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 80 teeth tooth width 25mm outside diameter 205mm SKU: 23255080](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-80-teeth-tooth-width-25mm-outside-diameter-205mm-sku-23255080/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 72 teeth tooth width 25mm outside diameter 185mm SKU: 23255072](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-72-teeth-tooth-width-25mm-outside-diameter-185mm-sku-23255072/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 70 teeth tooth width 25mm outside diameter 180mm SKU: 23255070](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-70-teeth-tooth-width-25mm-outside-diameter-180mm-sku-23255070/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 23255060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-23255060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 23255050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-23255050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 23255048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-23255048/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 45 teeth tooth width 25mm outside diameter 117,5mm SKU: 23255045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-45-teeth-tooth-width-25mm-outside-diameter-1175mm-sku-23255045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23255040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23255040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 36 teeth tooth width 25mm outside diameter 95mm SKU: 23255036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-36-teeth-tooth-width-25mm-outside-diameter-95mm-sku-23255036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 32 teeth tooth width 25mm outside diameter 85mm SKU: 23255032](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-sku-23255032/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23255030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23255030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23255025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23255025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23255024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23255024/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23255020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23255020/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23255018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23255018/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23255015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23255015/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear stainless steel 1.4305 with hub module 2 80 teeth tooth width 20mm outside diameter 164mm SKU: 23199280](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-80-teeth-tooth-width-20mm-outside-diameter-164mm-sku-23199280/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 60 teeth tooth width 20mm outside diameter 124mm SKU: 23199260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-60-teeth-tooth-width-20mm-outside-diameter-124mm-sku-23199260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 55 teeth tooth width 20mm outside diameter 114mm SKU: 23199255](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-55-teeth-tooth-width-20mm-outside-diameter-114mm-sku-23199255/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 50 teeth tooth width 20mm outside diameter 104mm SKU: 23199250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-50-teeth-tooth-width-20mm-outside-diameter-104mm-sku-23199250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 48 teeth tooth width 20mm outside diameter 100mm SKU: 23199248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-48-teeth-tooth-width-20mm-outside-diameter-100mm-sku-23199248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 45 teeth tooth width 20mm outside diameter 94mm SKU: 23199245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-45-teeth-tooth-width-20mm-outside-diameter-94mm-sku-23199245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 40 teeth tooth width 20mm outside diameter 84mm SKU: 23199240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-40-teeth-tooth-width-20mm-outside-diameter-84mm-sku-23199240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 36 teeth tooth width 20mm outside diameter 76mm SKU: 23199236](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-36-teeth-tooth-width-20mm-outside-diameter-76mm-sku-23199236/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 35 teeth tooth width 20mm outside diameter 74mm SKU: 23199235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-35-teeth-tooth-width-20mm-outside-diameter-74mm-sku-23199235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 30 teeth tooth width 20mm outside diameter 64mm SKU: 23199230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-30-teeth-tooth-width-20mm-outside-diameter-64mm-sku-23199230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 28 teeth tooth width 20mm outside diameter 60mm SKU: 23199228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-28-teeth-tooth-width-20mm-outside-diameter-60mm-sku-23199228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 25 teeth tooth width 20mm outside diameter 54mm SKU: 23199225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-25-teeth-tooth-width-20mm-outside-diameter-54mm-sku-23199225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 24 teeth tooth width 20mm outside diameter 52mm SKU: 23199224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-24-teeth-tooth-width-20mm-outside-diameter-52mm-sku-23199224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 22 teeth tooth width 20mm outside diameter 48mm SKU: 23199222](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-22-teeth-tooth-width-20mm-outside-diameter-48mm-sku-23199222/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 20 teeth tooth width 20mm outside diameter 44mm SKU: 23199220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-20-teeth-tooth-width-20mm-outside-diameter-44mm-sku-23199220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 18 teeth tooth width 20mm outside diameter 40mm SKU: 23199218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-18-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23199218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 16 teeth tooth width 20mm outside diameter 36mm SKU: 23199216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-16-teeth-tooth-width-20mm-outside-diameter-36mm-sku-23199216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 15 teeth tooth width 20mm outside diameter 34mm SKU: 23199215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-15-teeth-tooth-width-20mm-outside-diameter-34mm-sku-23199215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 14 teeth tooth width 20mm outside diameter 32mm SKU: 23199214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-14-teeth-tooth-width-20mm-outside-diameter-32mm-sku-23199214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 13 teeth tooth width 20mm outside diameter 30mm SKU: 23199213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-13-teeth-tooth-width-20mm-outside-diameter-30mm-sku-23199213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 12 teeth tooth width 20mm outside diameter 28mm SKU: 23199212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-12-teeth-tooth-width-20mm-outside-diameter-28mm-sku-23199212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 11 teeth tooth width 20mm outside diameter 26mm SKU: 23199211](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-11-teeth-tooth-width-20mm-outside-diameter-26mm-sku-23199211/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2 10 teeth tooth width 20mm outside diameter 24mm SKU: 23199210](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-10-teeth-tooth-width-20mm-outside-diameter-24mm-sku-23199210/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 80 teeth tooth width 16mm outside diameter 164m SKU: 23199080](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-80-teeth-tooth-width-16mm-outside-diameter-164m-sku-23199080/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 60 teeth tooth width 16mm outside diameter 124mm SKU: 23199060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-60-teeth-tooth-width-16mm-outside-diameter-124mm-sku-23199060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 55 teeth tooth width 16mm outside diameter 114mm SKU: 23199055](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-55-teeth-tooth-width-16mm-outside-diameter-114mm-sku-23199055/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 50 teeth tooth width 16mm outside diameter 104mm SKU: 23199050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-50-teeth-tooth-width-16mm-outside-diameter-104mm-sku-23199050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 48 teeth tooth width 16mm outside diameter 100mm SKU: 23199048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-48-teeth-tooth-width-16mm-outside-diameter-100mm-sku-23199048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 45 teeth tooth width 16mm outside diameter 94mm SKU: 23199045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-45-teeth-tooth-width-16mm-outside-diameter-94mm-sku-23199045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 40 teeth tooth width 16mm outside diameter 84mm SKU: 23199040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-40-teeth-tooth-width-16mm-outside-diameter-84mm-sku-23199040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 35 teeth tooth width 16mm outside diameter 74mm SKU: 23199035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-35-teeth-tooth-width-16mm-outside-diameter-74mm-sku-23199035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 30 teeth tooth width 16mm outside diameter 64mm SKU: 23199030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-30-teeth-tooth-width-16mm-outside-diameter-64mm-sku-23199030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 28 teeth tooth width 16mm outside diameter 60m SKU: 23199028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-28-teeth-tooth-width-16mm-outside-diameter-60m-sku-23199028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 25 teeth tooth width 16mm outside diameter 54mm SKU: 23199025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-25-teeth-tooth-width-16mm-outside-diameter-54mm-sku-23199025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 24 teeth tooth width 16mm outside diameter 52mm SKU: 23199024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-24-teeth-tooth-width-16mm-outside-diameter-52mm-sku-23199024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 22 teeth tooth width 16mm outside diameter 48m SKU: 23199022](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-22-teeth-tooth-width-16mm-outside-diameter-48m-sku-23199022/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 20 teeth tooth width 16mm outside diameter 44mm SKU: 23199020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-20-teeth-tooth-width-16mm-outside-diameter-44mm-sku-23199020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 18 teeth tooth width 16mm outside diameter 40mm SKU: 23199018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-18-teeth-tooth-width-16mm-outside-diameter-40mm-sku-23199018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 16 teeth tooth width 16mm outside diameter 36m SKU: 23199016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-16-teeth-tooth-width-16mm-outside-diameter-36m-sku-23199016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 15 teeth tooth width 16mm outside diameter 34mm SKU: 23199015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-15-teeth-tooth-width-16mm-outside-diameter-34mm-sku-23199015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 14 teeth tooth width 16mm outside diameter 32mm SKU: 23199014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-14-teeth-tooth-width-16mm-outside-diameter-32mm-sku-23199014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 12 teeth tooth width 16mm outside diameter 28mm SKU: 23199012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-12-teeth-tooth-width-16mm-outside-diameter-28mm-sku-23199012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 11 teeth tooth width 16mm outside diameter 26mm SKU: 23199011](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-11-teeth-tooth-width-16mm-outside-diameter-26mm-sku-23199011/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2 10 teeth tooth width 16mm outside diameter 24mm SKU: 23199010](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-10-teeth-tooth-width-16mm-outside-diameter-24mm-sku-23199010/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Ball screw spindle rolled 20x10mm length 1495mm SKU: 64020102](https://maedler.in/product/ball-screw-spindle-rolled-20x10mm-length-1495mm-sku-64020102/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x10mm length 995mm SKU: 64020101](https://maedler.in/product/ball-screw-spindle-rolled-20x10mm-length-995mm-sku-64020101/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 20x5mm height 34mm outer diameter 36mm SKU: 64020056](https://maedler.in/product/cylindrical-ball-screw-nut-20x5mm-height-34mm-outer-diameter-36mm-sku-64020056/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 20x5mm height 42mm flange diameter 58mm SKU: 64020055](https://maedler.in/product/flanged-ball-screw-nut-20x5mm-height-42mm-flange-diameter-58mm-sku-64020055/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x5mm length 2800mm SKU: 64020054](https://maedler.in/product/ball-screw-spindle-rolled-20x5mm-length-2800mm-sku-64020054/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x5mm length 2100mm SKU: 64020053](https://maedler.in/product/ball-screw-spindle-rolled-20x5mm-length-2100mm-sku-64020053/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x5mm length 1395mm SKU: 64020052](https://maedler.in/product/ball-screw-spindle-rolled-20x5mm-length-1395mm-sku-64020052/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x5mm length 695mm SKU: 64020051](https://maedler.in/product/ball-screw-spindle-rolled-20x5mm-length-695mm-sku-64020051/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 16x16mm height 48mm flange diameter 53mm SKU: 64016165](https://maedler.in/product/flanged-ball-screw-nut-16x16mm-height-48mm-flange-diameter-53mm-sku-64016165/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x16mm length 3000mm SKU: 64016164](https://maedler.in/product/ball-screw-spindle-rolled-16x16mm-length-3000mm-sku-64016164/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x16mm length 1995mm SKU: 64016163](https://maedler.in/product/ball-screw-spindle-rolled-16x16mm-length-1995mm-sku-64016163/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x16mm length 1495mm SKU: 64016162](https://maedler.in/product/ball-screw-spindle-rolled-16x16mm-length-1495mm-sku-64016162/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x16mm length 995mm SKU: 64016161](https://maedler.in/product/ball-screw-spindle-rolled-16x16mm-length-995mm-sku-64016161/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 16x10mm height 40mm outer diameter 28mm SKU: 64016106](https://maedler.in/product/cylindrical-ball-screw-nut-16x10mm-height-40mm-outer-diameter-28mm-sku-64016106/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 16x10mm height 45mm flange diameter 48mm SKU: 64016105](https://maedler.in/product/flanged-ball-screw-nut-16x10mm-height-45mm-flange-diameter-48mm-sku-64016105/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x10mm length 3000mm SKU: 64016104](https://maedler.in/product/ball-screw-spindle-rolled-16x10mm-length-3000mm-sku-64016104/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x10mm length 1995mm SKU: 64016103](https://maedler.in/product/ball-screw-spindle-rolled-16x10mm-length-1995mm-sku-64016103/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x10mm length 1495mm SKU: 64016102](https://maedler.in/product/ball-screw-spindle-rolled-16x10mm-length-1495mm-sku-64016102/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x10mm length 995mm SKU: 64016101](https://maedler.in/product/ball-screw-spindle-rolled-16x10mm-length-995mm-sku-64016101/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 16x5mm height 34mm outer diameter 28mm SKU: 64016056](https://maedler.in/product/cylindrical-ball-screw-nut-16x5mm-height-34mm-outer-diameter-28mm-sku-64016056/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 16x5mm height 42mm flange diameter 48mm SKU: 64016055](https://maedler.in/product/flanged-ball-screw-nut-16x5mm-height-42mm-flange-diameter-48mm-sku-64016055/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x5mm length 3000mm SKU: 64016054](https://maedler.in/product/ball-screw-spindle-rolled-16x5mm-length-3000mm-sku-64016054/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x5mm length 1995mm SKU: 64016053](https://maedler.in/product/ball-screw-spindle-rolled-16x5mm-length-1995mm-sku-64016053/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x5mm length 1495mm SKU: 64016052](https://maedler.in/product/ball-screw-spindle-rolled-16x5mm-length-1495mm-sku-64016052/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 16x5mm length 995mm SKU: 64016051](https://maedler.in/product/ball-screw-spindle-rolled-16x5mm-length-995mm-sku-64016051/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 12x4mm height 30mm outer diameter 22mm SKU: 64012046](https://maedler.in/product/cylindrical-ball-screw-nut-12x4mm-height-30mm-outer-diameter-22mm-sku-64012046/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 12x4mm height 35mm flange diameter 42mm SKU: 64012045](https://maedler.in/product/flanged-ball-screw-nut-12x4mm-height-35mm-flange-diameter-42mm-sku-64012045/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 12x4mm length 2600mm SKU: 64012044](https://maedler.in/product/ball-screw-spindle-rolled-12x4mm-length-2600mm-sku-64012044/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 12x4mm length 1950mm SKU: 64012043](https://maedler.in/product/ball-screw-spindle-rolled-12x4mm-length-1950mm-sku-64012043/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 12x4mm length 1295mm SKU: 64012042](https://maedler.in/product/ball-screw-spindle-rolled-12x4mm-length-1295mm-sku-64012042/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 12x4mm length 645mm SKU: 64012041](https://maedler.in/product/ball-screw-spindle-rolled-12x4mm-length-645mm-sku-64012041/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 10x2mm height 25mm outer diameter 19.5mm SKU: 64010026](https://maedler.in/product/cylindrical-ball-screw-nut-10x2mm-height-25mm-outer-diameter-19-5mm-sku-64010026/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 10x2mm height 28mm flange diameter 36mm SKU: 64010025](https://maedler.in/product/flanged-ball-screw-nut-10x2mm-height-28mm-flange-diameter-36mm-sku-64010025/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 10x2mm length 1000mm SKU: 64010023](https://maedler.in/product/ball-screw-spindle-rolled-10x2mm-length-1000mm-sku-64010023/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 10x2mm length 495mm SKU: 64010022](https://maedler.in/product/ball-screw-spindle-rolled-10x2mm-length-495mm-sku-64010022/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 10x2mm length 245mm SKU: 64010021](https://maedler.in/product/ball-screw-spindle-rolled-10x2mm-length-245mm-sku-64010021/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 8x2mm height 26mm flange diameter 31mm SKU: 64008025](https://maedler.in/product/flanged-ball-screw-nut-8x2mm-height-26mm-flange-diameter-31mm-sku-64008025/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 8x2mm length 1000mm SKU: 64008023](https://maedler.in/product/ball-screw-spindle-rolled-8x2mm-length-1000mm-sku-64008023/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 8x2mm length 495mm SKU: 64008022](https://maedler.in/product/ball-screw-spindle-rolled-8x2mm-length-495mm-sku-64008022/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 8x2mm length 245mm SKU: 64008021](https://maedler.in/product/ball-screw-spindle-rolled-8x2mm-length-245mm-sku-64008021/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Clevis DIN 71752 size 16 x 64 left handed stainless steel 1.4301 SKU: 63799316](https://maedler.in/product/clevis-din-71752-size-16-x-64-left-handed-stainless-steel-1-4301-sku-63799316/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 16 x 32 left handed stainless steel 1.4301 SKU: 63799315](https://maedler.in/product/clevis-din-71752-size-16-x-32-left-handed-stainless-steel-1-4301-sku-63799315/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 14 x 56 left handed stainless steel 1.4301 SKU: 63799314](https://maedler.in/product/clevis-din-71752-size-14-x-56-left-handed-stainless-steel-1-4301-sku-63799314/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. - [Clevis DIN 71752 size 14 x 28 left handed stainless steel 1.4301 SKU: 63799313](https://maedler.in/product/clevis-din-71752-size-14-x-28-left-handed-stainless-steel-1-4301-sku-63799313/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. - [Clevis DIN 71752 size 12 x 48 left handed stainless steel 1.4301 SKU: 63799312](https://maedler.in/product/clevis-din-71752-size-12-x-48-left-handed-stainless-steel-1-4301-sku-63799312/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 12 x 24 left handed stainless steel 1.4301 SKU: 63799311](https://maedler.in/product/clevis-din-71752-size-12-x-24-left-handed-stainless-steel-1-4301-sku-63799311/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. - [Clevis DIN 71752 size 10 x 40 left handed stainless steel 1.4301 SKU: 63799310](https://maedler.in/product/clevis-din-71752-size-10-x-40-left-handed-stainless-steel-1-4301-sku-63799310/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 10 x 20 left handed stainless steel 1.4301 SKU: 63799309](https://maedler.in/product/clevis-din-71752-size-10-x-20-left-handed-stainless-steel-1-4301-sku-63799309/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. - [Clevis DIN 71752 size 8 x 32 left handed stainless steel 1.4301 SKU: 63799308](https://maedler.in/product/clevis-din-71752-size-8-x-32-left-handed-stainless-steel-1-4301-sku-63799308/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 8 x 16 left handed stainless steel 1.4301 SKU: 63799307](https://maedler.in/product/clevis-din-71752-size-8-x-16-left-handed-stainless-steel-1-4301-sku-63799307/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 6 x 24 left handed stainless steel 1.4301 SKU: 63799306](https://maedler.in/product/clevis-din-71752-size-6-x-24-left-handed-stainless-steel-1-4301-sku-63799306/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. - [Clevis DIN 71752 size 6 x 12 left handed stainless steel 1.4301 SKU: 63799305](https://maedler.in/product/clevis-din-71752-size-6-x-12-left-handed-stainless-steel-1-4301-sku-63799305/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 5 x 20 left handed stainless steel 1.4301 SKU: 63799304](https://maedler.in/product/clevis-din-71752-size-5-x-20-left-handed-stainless-steel-1-4301-sku-63799304/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. - [Clevis DIN 71752 size 5 x 10 left handed stainless steel 1.4301 SKU: 63799303](https://maedler.in/product/clevis-din-71752-size-5-x-10-left-handed-stainless-steel-1-4301-sku-63799303/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 4 x 16 left handed stainless steel 1.4301 SKU: 63799302](https://maedler.in/product/clevis-din-71752-size-4-x-16-left-handed-stainless-steel-1-4301-sku-63799302/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. - [Clevis DIN 71752 size 4 x 8 left handed stainless steel 1.4301 SKU: 63799301](https://maedler.in/product/clevis-din-71752-size-4-x-8-left-handed-stainless-steel-1-4301-sku-63799301/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 20 x 40 right handed stainless steel 1.4301 SKU: 63799220](https://maedler.in/product/clevis-din-71752-size-20-x-40-right-handed-stainless-steel-1-4301-sku-63799220/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 16 x 64 right handed stainless steel 1.4301 SKU: 63799216](https://maedler.in/product/clevis-din-71752-size-16-x-64-right-handed-stainless-steel-1-4301-sku-63799216/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 16 x 32 right handed stainless steel 1.4301 SKU: 63799215](https://maedler.in/product/clevis-din-71752-size-16-x-32-right-handed-stainless-steel-1-4301-sku-63799215/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 14 x 56 right handed stainless steel 1.4301 SKU: 63799214](https://maedler.in/product/clevis-din-71752-size-14-x-56-right-handed-stainless-steel-1-4301-sku-63799214/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 14 x 28 right handed stainless steel 1.4301 SKU: 63799213](https://maedler.in/product/clevis-din-71752-size-14-x-28-right-handed-stainless-steel-1-4301-sku-63799213/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 12 x 48 right handed stainless steel 1.4301 SKU: 63799212](https://maedler.in/product/clevis-din-71752-size-12-x-48-right-handed-stainless-steel-1-4301-sku-63799212/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 12 x 24 right handed stainless steel 1.4301 SKU: 63799211](https://maedler.in/product/clevis-din-71752-size-12-x-24-right-handed-stainless-steel-1-4301-sku-63799211/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 10 x 40 right handed stainless steel 1.4301 SKU: 63799210](https://maedler.in/product/clevis-din-71752-size-10-x-40-right-handed-stainless-steel-1-4301-sku-63799210/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 10 x 20 right handed stainless steel 1.4301 SKU: 63799209](https://maedler.in/product/clevis-din-71752-size-10-x-20-right-handed-stainless-steel-1-4301-sku-63799209/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 8 x 32 right handed stainless steel 1.4301 SKU: 63799208](https://maedler.in/product/clevis-din-71752-size-8-x-32-right-handed-stainless-steel-1-4301-sku-63799208/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 8 x 16 right handed stainless steel 1.4301 SKU: 63799207](https://maedler.in/product/clevis-din-71752-size-8-x-16-right-handed-stainless-steel-1-4301-sku-63799207/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 6 x 24 right handed stainless steel 1.4301 SKU: 63799206](https://maedler.in/product/clevis-din-71752-size-6-x-24-right-handed-stainless-steel-1-4301-sku-63799206/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 6 x 12 right handed stainless steel 1.4301 SKU: 63799205](https://maedler.in/product/clevis-din-71752-size-6-x-12-right-handed-stainless-steel-1-4301-sku-63799205/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 5 x 20 right handed stainless steel 1.4301 SKU: 63799204](https://maedler.in/product/clevis-din-71752-size-5-x-20-right-handed-stainless-steel-1-4301-sku-63799204/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 5 x 10 right handed stainless steel 1.4301 SKU: 63799203](https://maedler.in/product/clevis-din-71752-size-5-x-10-right-handed-stainless-steel-1-4301-sku-63799203/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 4 x 16 right handed stainless steel 1.4301 SKU: 63799202](https://maedler.in/product/clevis-din-71752-size-4-x-16-right-handed-stainless-steel-1-4301-sku-63799202/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis DIN 71752 size 4 x 8 right handed stainless steel 1.4301 SKU: 63799201](https://maedler.in/product/clevis-din-71752-size-4-x-8-right-handed-stainless-steel-1-4301-sku-63799201/): Material: Stainless steel 1.4301 (AISI 304). Design G: Without bolt. Thread: Gewindeausführung rechts = thread right-handed and links = thread left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 16 x 24 left handed stainless steel 1.4301 SKU: 63799116](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-16-x-24-left-handed-stainless-steel-1-4301-sku-63799116/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless Steel 1.4305. Design A: With bolt and circlip. Thread: Gewindeausführung links = left-handed. - [Clevis joint DIN 71752 with circlip size 16 x 32 left handed stainless steel 1.4301 SKU: 63799115](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-16-x-32-left-handed-stainless-steel-1-4301-sku-63799115/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 14 x 56 left handed stainless steel 1.4301 SKU: 63799114](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-14-x-56-left-handed-stainless-steel-1-4301-sku-63799114/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 14 x 28 left handed stainless steel 1.4301 SKU: 63799113](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-14-x-28-left-handed-stainless-steel-1-4301-sku-63799113/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 12 x 48 left handed stainless steel 1.4301 SKU: 63799112](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-12-x-48-left-handed-stainless-steel-1-4301-sku-63799112/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 12 x 24 left handed stainless steel 1.4301 SKU: 63799111](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-12-x-24-left-handed-stainless-steel-1-4301-sku-63799111/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 10 x 40 left handed stainless steel 1.4301 SKU: 63799110](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-10-x-40-left-handed-stainless-steel-1-4301-sku-63799110/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless Steel 1.4305. Design A: With bolt and circlip. Thread: Gewindeausführung links = left-handed. - [Clevis joint DIN 71752 with circlip size 10 x 20 left handed stainless steel 1.4301 SKU: 63799109](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-10-x-20-left-handed-stainless-steel-1-4301-sku-63799109/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless Steel 1.4305. Design A: With bolt and circlip. Thread: Gewindeausführung links = left-handed. - [Clevis joint DIN 71752 with circlip size 8 x 32 left handed stainless steel 1.4301 SKU: 63799108](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-8-x-32-left-handed-stainless-steel-1-4301-sku-63799108/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless Steel 1.4305. Design A: With bolt and circlip. Thread: Gewindeausführung links = left-handed. - [Clevis joint DIN 71752 with circlip size 8 x 16 left handed stainless steel 1.4301 SKU: 63799107](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-8-x-16-left-handed-stainless-steel-1-4301-sku-63799107/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 6 x 24 left handed stainless steel 1.4301 SKU: 63799106](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-6-x-24-left-handed-stainless-steel-1-4301-sku-63799106/): Material: Stainless steel 1.4305. Design G: Without bolt. Thread: Gewindeausführung links = left-handed. Material: Stainless Steel 1.4305. Design A: With bolt and circlip. Thread: Gewindeausführung links = left-handed. - [Clevis joint DIN 71752 with circlip size 6 x 12 left handed stainless steel 1.4301 SKU: 63799105](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-6-x-12-left-handed-stainless-steel-1-4301-sku-63799105/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 5 x 20 left handed stainless steel 1.4301 SKU: 63799104](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-5-x-20-left-handed-stainless-steel-1-4301-sku-63799104/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 5 x 10 left handed stainless steel 1.4301 SKU: 63799103](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-5-x-10-left-handed-stainless-steel-1-4301-sku-63799103/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 4 x 16 left handed stainless steel 1.4301 SKU: 63799102](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-4-x-16-left-handed-stainless-steel-1-4301-sku-63799102/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 4 x 8 left handed stainless steel 1.4301 SKU: 63799101](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-4-x-8-left-handed-stainless-steel-1-4301-sku-63799101/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 20 x 40 right handed stainless steel 1.4301 SKU: 63799020](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-20-x-40-right-handed-stainless-steel-1-4301-sku-63799020/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 16 x 24 right handed stainless steel 1.4301 SKU: 63799016](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-16-x-24-right-handed-stainless-steel-1-4301-sku-63799016/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 16 x 32 right handed stainless steel 1.4301 SKU: 63799015](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-16-x-32-right-handed-stainless-steel-1-4301-sku-63799015/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 14 x 56 right handed stainless steel 1.4301 SKU: 63799014](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-14-x-56-right-handed-stainless-steel-1-4301-sku-63799014/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 14 x 28 right handed stainless steel 1.4301 SKU: 63799013](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-14-x-28-right-handed-stainless-steel-1-4301-sku-63799013/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 12 x 48 right handed stainless steel 1.4301 SKU: 63799012](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-12-x-48-right-handed-stainless-steel-1-4301-sku-63799012/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 12 x 24 right handed stainless steel 1.4301 SKU: 63799011](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-12-x-24-right-handed-stainless-steel-1-4301-sku-63799011/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 10 x 40 right handed stainless steel 1.4301 SKU: 63799010](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-10-x-40-right-handed-stainless-steel-1-4301-sku-63799010/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 10 x 20 right handed stainless steel 1.4301 SKU: 63799009](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-10-x-20-right-handed-stainless-steel-1-4301-sku-63799009/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 8 x 32 right handed stainless steel 1.4301 SKU: 63799008](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-8-x-32-right-handed-stainless-steel-1-4301-sku-63799008/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Clevis joint DIN 71752 with circlip size 8 x 16 right handed stainless steel 1.4301 SKU: 63799007](https://maedler.in/product/clevis-joint-din-71752-with-circlip-size-8-x-16-right-handed-stainless-steel-1-4301-sku-63799007/): Material: Stainless steel 1.4301 (AISI 304). Design A: With bolt and circlip. Thread: Gewindeausführung rechts = thread right-handed and links = left-handed. * Size 20 is not part of the DIN. - [Spur gear made of stainless steel 1.4305 with hub module 3 15 teeth tooth width 25mm outside diameter 51mm SKU: 23399015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-15-teeth-tooth-width-25mm-outside-diameter-51mm-sku-23399015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 14 teeth tooth width 25mm outside diameter 48mm SKU: 23399014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-14-teeth-tooth-width-25mm-outside-diameter-48mm-sku-23399014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 12 teeth tooth width 25mm outside diameter 42mm SKU: 23399012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-12-teeth-tooth-width-25mm-outside-diameter-42mm-sku-23399012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23395240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23395240/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23395236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23395236/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23395230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23395230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23395225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23395225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23395224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23395224/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23395220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23395220/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23395218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23395218/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23395215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23395215/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 23395060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-23395060/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 23395050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-23395050/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 23395048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-23395048/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 45 teeth tooth width 30mm outside diameter 141mm SKU: 23395045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-45-teeth-tooth-width-30mm-outside-diameter-141mm-sku-23395045/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23395040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23395040/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23395036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23395036/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23395030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23395030/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23395025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23395025/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23395024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23395024/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23395020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23395020/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23395018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23395018/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23395015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23395015/): Material: Outer part: Plastic PA 12 G, white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 3 60 teeth tooth width 30mm outside diameter 186mm teeth induction hardened SKU: 23388160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-teeth-induction-hardened-sku-23388160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 50 teeth tooth width 30mm outside diameter 156mm teeth induction hardened SKU: 23388150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-teeth-induction-hardened-sku-23388150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 40 teeth tooth width 30mm outside diameter 126mm teeth induction hardened SKU: 23388140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-teeth-induction-hardened-sku-23388140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 36 teeth tooth width 30mm outside diameter 114mm teeth induction hardened SKU: 23388136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-teeth-induction-hardened-sku-23388136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 35 teeth tooth width 30mm outside diameter 111mm teeth induction hardened SKU: 23388135](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-35-teeth-tooth-width-30mm-outside-diameter-111mm-teeth-induction-hardened-sku-23388135/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 32 teeth tooth width 30mm outside diameter 102mm teeth induction hardened SKU: 23388132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-32-teeth-tooth-width-30mm-outside-diameter-102mm-teeth-induction-hardened-sku-23388132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 30 teeth tooth width 30mm outside diameter 96mm teeth induction hardened SKU: 23388130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-teeth-induction-hardened-sku-23388130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 25 teeth tooth width 30mm outside diameter 81mm teeth induction hardened SKU: 23388125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-teeth-induction-hardened-sku-23388125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 24 teeth tooth width 30mm outside diameter 78mm teeth induction hardened SKU: 23388124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-teeth-induction-hardened-sku-23388124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 22 teeth tooth width 30mm outside diameter 72mm teeth induction hardened SKU: 23388122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-22-teeth-tooth-width-30mm-outside-diameter-72mm-teeth-induction-hardened-sku-23388122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 20 teeth tooth width 30mm outside diameter 66mm teeth induction hardened SKU: 23388120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-teeth-induction-hardened-sku-23388120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 18 teeth tooth width 30mm outside diameter 60mm teeth induction hardened SKU: 23388118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-teeth-induction-hardened-sku-23388118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 17 teeth tooth width 30mm outside diameter 57mm teeth induction hardened SKU: 23388117](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-17-teeth-tooth-width-30mm-outside-diameter-57mm-teeth-induction-hardened-sku-23388117/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 16 teeth tooth width 30mm outside diameter 54mm teeth induction hardened SKU: 23388116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-16-teeth-tooth-width-30mm-outside-diameter-54mm-teeth-induction-hardened-sku-23388116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 15 teeth tooth width 30mm outside diameter 51mm teeth induction hardened SKU: 23388115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-teeth-induction-hardened-sku-23388115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 14 teeth tooth width 30mm outside diameter 48mm teeth induction hardened SKU: 23388114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-14-teeth-tooth-width-30mm-outside-diameter-48mm-teeth-induction-hardened-sku-23388114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 3 12 teeth tooth width 30mm outside diameter 42mm teeth induction hardened SKU: 23388112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-3-12-teeth-tooth-width-30mm-outside-diameter-42mm-teeth-induction-hardened-sku-23388112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23355240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23355240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23355236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23355236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23355230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23355230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23355225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23355225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23355224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23355224/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23355220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23355220/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23355218](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23355218/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23355215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23355215/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 23355060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-23355060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 23355050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-23355050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 23355048](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-23355048/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 45 teeth tooth width 30mm outside diameter 141mm SKU: 23355045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-45-teeth-tooth-width-30mm-outside-diameter-141mm-sku-23355045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23355040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23355040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23355036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23355036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23355030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23355030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23355025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23355025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23355024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23355024/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23355020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23355020/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23355018](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23355018/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23355015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23355015/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear stainless steel 1.4305 with hub module 2.5 60 teeth tooth width 25mm outside diameter 155mm SKU: 23299260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-155mm-sku-23299260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 55 teeth tooth width 25mm outside diameter 142.5mm SKU: 23299255](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-55-teeth-tooth-width-25mm-outside-diameter-142-5mm-sku-23299255/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 50 teeth tooth width 25mm outside diameter 130mm SKU: 23299250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-130mm-sku-23299250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 48 teeth tooth width 25mm outside diameter 125mm SKU: 23299248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-48-teeth-tooth-width-25mm-outside-diameter-125mm-sku-23299248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 45 teeth tooth width 25mm outside diameter 117.5mm SKU: 23299245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-45-teeth-tooth-width-25mm-outside-diameter-117-5mm-sku-23299245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23299240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23299240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 35 teeth tooth width 25mm outside diameter 92.5mm SKU: 23299235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-35-teeth-tooth-width-25mm-outside-diameter-92-5mm-sku-23299235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 32 teeth tooth width 25mm outside diameter 85mm SKU: 23299232](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-32-teeth-tooth-width-25mm-outside-diameter-85mm-sku-23299232/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23299230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23299230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 28 teeth tooth width 25mm outside diameter 75mm SKU: 23299228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-28-teeth-tooth-width-25mm-outside-diameter-75mm-sku-23299228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23299225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23299225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 24 teeth tooth width 25mm outside diameter 65mm SKU: 23299224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-24-teeth-tooth-width-25mm-outside-diameter-65mm-sku-23299224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 20 teeth tooth width 25mm outside diameter 55mm SKU: 23299220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-20-teeth-tooth-width-25mm-outside-diameter-55mm-sku-23299220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 18 teeth tooth width 25mm outside diameter 50mm SKU: 23299218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-18-teeth-tooth-width-25mm-outside-diameter-50mm-sku-23299218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 16 teeth tooth width 25mm outside diameter 45mm SKU: 23299216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-16-teeth-tooth-width-25mm-outside-diameter-45mm-sku-23299216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 15 teeth tooth width 25mm outside diameter 42.5mm SKU: 23299215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-15-teeth-tooth-width-25mm-outside-diameter-42-5mm-sku-23299215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 14 teeth tooth width 25mm outside diameter 40mm SKU: 23299214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-14-teeth-tooth-width-25mm-outside-diameter-40mm-sku-23299214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 13 teeth tooth width 25mm outside diameter 37.5mm SKU: 23299213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-13-teeth-tooth-width-25mm-outside-diameter-37-5mm-sku-23299213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm SKU: 23299212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-2-5-12-teeth-tooth-width-25mm-outside-diameter-35mm-sku-23299212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 60 teeth tooth width 20mm outside diameter 155mm SKU: 23299060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-60-teeth-tooth-width-20mm-outside-diameter-155mm-sku-23299060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 55 teeth tooth width 20mm outside diameter 142.5mm SKU: 23299055](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-55-teeth-tooth-width-20mm-outside-diameter-142-5mm-sku-23299055/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 50 teeth tooth width 20mm outside diameter 130mm SKU: 23299050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-50-teeth-tooth-width-20mm-outside-diameter-130mm-sku-23299050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 48 teeth tooth width 20mm outside diameter 125mm SKU: 23299048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-48-teeth-tooth-width-20mm-outside-diameter-125mm-sku-23299048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 45 teeth tooth width 20mm outside diameter 117.5mm SKU: 23299045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-45-teeth-tooth-width-20mm-outside-diameter-117-5mm-sku-23299045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 40 teeth tooth width 20mm outside diameter 105mm SKU: 23299040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-40-teeth-tooth-width-20mm-outside-diameter-105mm-sku-23299040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 35 teeth tooth width 20mm outside diameter 92.5mm SKU: 23299035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-35-teeth-tooth-width-20mm-outside-diameter-92-5mm-sku-23299035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 32 teeth tooth width 20mm outside diameter 85mm SKU: 23299032](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-32-teeth-tooth-width-20mm-outside-diameter-85mm-sku-23299032/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 30 teeth tooth width 20mm outside diameter 80mm SKU: 23299030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-30-teeth-tooth-width-20mm-outside-diameter-80mm-sku-23299030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 28 teeth tooth width 20mm outside diameter 75mm SKU: 23299028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-28-teeth-tooth-width-20mm-outside-diameter-75mm-sku-23299028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm SKU: 23299025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-25-teeth-tooth-width-20mm-outside-diameter-67-5mm-sku-23299025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 24 teeth tooth width 20mm outside diameter 65mm SKU: 23299024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-24-teeth-tooth-width-20mm-outside-diameter-65mm-sku-23299024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 20 teeth tooth width 20mm outside diameter 55mm SKU: 23299020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-20-teeth-tooth-width-20mm-outside-diameter-55mm-sku-23299020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 18 teeth tooth width 20mm outside diameter 50mm SKU: 23299018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-18-teeth-tooth-width-20mm-outside-diameter-50mm-sku-23299018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 16 teeth tooth width 20mm outside diameter 45mm SKU: 23299016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-16-teeth-tooth-width-20mm-outside-diameter-45mm-sku-23299016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 15 teeth tooth width 20mm outside diameter 42.5mm SKU: 23299015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-15-teeth-tooth-width-20mm-outside-diameter-42-5mm-sku-23299015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 14 teeth tooth width 20mm outside diameter 40mm SKU: 23299014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-14-teeth-tooth-width-20mm-outside-diameter-40mm-sku-23299014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 2.5 12 teeth tooth width 20mm outside diameter 35mm SKU: 23299012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-2-5-12-teeth-tooth-width-20mm-outside-diameter-35mm-sku-23299012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 40 teeth tooth width 25mm outside diameter 105mm SKU: 23295240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-40-teeth-tooth-width-25mm-outside-diameter-105mm-sku-23295240/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 30 teeth tooth width 25mm outside diameter 80mm SKU: 23295230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-80mm-sku-23295230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 2.5 25 teeth tooth width 25mm outside diameter 67.5mm SKU: 23295225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-2-5-25-teeth-tooth-width-25mm-outside-diameter-67-5mm-sku-23295225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Pillow block bearing unit EK 12 bore 12mm material steel black oxide finished SKU: 64200312](https://maedler.in/product/pillow-block-bearing-unit-ek-12-bore-12mm-material-steel-black-oxide-finished-sku-64200312/): Material: Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 10 bore 10mm material steel black oxide finished SKU: 64200310](https://maedler.in/product/pillow-block-bearing-unit-ek-10-bore-10mm-material-steel-black-oxide-finished-sku-64200310/): Material: Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 08 bore 8mm material steel black oxide finished sealed only at the side without the nut SKU: 64200308](https://maedler.in/product/pillow-block-bearing-unit-ek-08-bore-8mm-material-steel-black-oxide-finished-sealed-only-at-the-side-without-the-nut-sku-64200308/): Material: Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 06 bore 6mm material steel black oxide finished sealed only at the side without the nut SKU: 64200306](https://maedler.in/product/pillow-block-bearing-unit-ek-06-bore-6mm-material-steel-black-oxide-finished-sealed-only-at-the-side-without-the-nut-sku-64200306/): Material: Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 40 bore 40mm material steel black oxide finished SKU: 64200240](https://maedler.in/product/pillow-block-bearing-unit-bf-40-bore-40mm-material-steel-black-oxide-finished-sku-64200240/): Material: Housing from steel, all surfaces machined, black oxide finished. On request: nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 35 bore 35mm material steel black oxide finished SKU: 64200235](https://maedler.in/product/pillow-block-bearing-unit-bf-35-bore-35mm-material-steel-black-oxide-finished-sku-64200235/): Material: Housing from steel, all surfaces machined, black oxide finished. On request: nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 30 bore 30mm material steel black oxide finished SKU: 64200230](https://maedler.in/product/pillow-block-bearing-unit-bf-30-bore-30mm-material-steel-black-oxide-finished-sku-64200230/): Material: Housing from steel, all surfaces machined, black oxide finished. On request: nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 25 bore 25mm material steel black oxide finished SKU: 64200225](https://maedler.in/product/pillow-block-bearing-unit-bf-25-bore-25mm-material-steel-black-oxide-finished-sku-64200225/): Material: Housing from steel, all surfaces machined, black oxide finished. On request: nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 20 bore 20mm material steel black oxide finished SKU: 64200220](https://maedler.in/product/pillow-block-bearing-unit-bf-20-bore-20mm-material-steel-black-oxide-finished-sku-64200220/): Material: Housing from steel, all surfaces machined, black oxide finished. On request: nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 17 bore 17mm material steel black oxide finished SKU: 64200217](https://maedler.in/product/pillow-block-bearing-unit-bf-17-bore-17mm-material-steel-black-oxide-finished-sku-64200217/): Material: Housing from steel, all surfaces machined, black oxide finished. On request: nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 15 bore 15mm material steel black oxide finished SKU: 64200215](https://maedler.in/product/pillow-block-bearing-unit-bf-15-bore-15mm-material-steel-black-oxide-finished-sku-64200215/): Material: Housing from steel, all surfaces machined, black oxide finished. On request: nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 12 bore 10mm material steel black oxide finished SKU: 64200212](https://maedler.in/product/pillow-block-bearing-unit-bf-12-bore-10mm-material-steel-black-oxide-finished-sku-64200212/): Material: Housing from steel, all surfaces machined, black oxide finished. On request: nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 10 bore 8mm material steel black oxide finished SKU: 64200210](https://maedler.in/product/pillow-block-bearing-unit-bf-10-bore-8mm-material-steel-black-oxide-finished-sku-64200210/): Material: Housing from steel, all surfaces machined, black oxide finished. On request: nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 40 bore 40mm material steel black oxide finished SKU: 64200140](https://maedler.in/product/pillow-block-bearing-unit-bk-40-bore-40mm-material-steel-black-oxide-finished-sku-64200140/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 35 bore 35mm material steel black oxide finished SKU: 64200135](https://maedler.in/product/pillow-block-bearing-unit-bk-35-bore-35mm-material-steel-black-oxide-finished-sku-64200135/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 30 bore 30mm material steel black oxide finished SKU: 64200130](https://maedler.in/product/pillow-block-bearing-unit-bk-30-bore-30mm-material-steel-black-oxide-finished-sku-64200130/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 25 bore 25mm material steel black oxide finished SKU: 64200125](https://maedler.in/product/pillow-block-bearing-unit-bk-25-bore-25mm-material-steel-black-oxide-finished-sku-64200125/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 20 bore 20mm material steel black oxide finished SKU: 64200120](https://maedler.in/product/pillow-block-bearing-unit-bk-20-bore-20mm-material-steel-black-oxide-finished-sku-64200120/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 17 bore 17mm material steel black oxide finished SKU: 64200117](https://maedler.in/product/pillow-block-bearing-unit-bk-17-bore-17mm-material-steel-black-oxide-finished-sku-64200117/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 15 bore 15mm material steel black oxide finished SKU: 64200115](https://maedler.in/product/pillow-block-bearing-unit-bk-15-bore-15mm-material-steel-black-oxide-finished-sku-64200115/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 12 bore 12mm material steel black oxide finished SKU: 64200112](https://maedler.in/product/pillow-block-bearing-unit-bk-12-bore-12mm-material-steel-black-oxide-finished-sku-64200112/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 10 bore 10mm material steel black oxide finished SKU: 64200110](https://maedler.in/product/pillow-block-bearing-unit-bk-10-bore-10mm-material-steel-black-oxide-finished-sku-64200110/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Cylindrical ball screw nut 63x10mm height 82mm outer diameter 90mm SKU: 64063106](https://maedler.in/product/cylindrical-ball-screw-nut-63x10mm-height-82mm-outer-diameter-90mm-sku-64063106/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 63x10mm height 97mm flange diameter 125mm SKU: 64063105](https://maedler.in/product/flanged-ball-screw-nut-63x10mm-height-97mm-flange-diameter-125mm-sku-64063105/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 63x10mm length 3000mm SKU: 64063104](https://maedler.in/product/ball-screw-spindle-rolled-63x10mm-length-3000mm-sku-64063104/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 63x10mm length 1995mm SKU: 64063103](https://maedler.in/product/ball-screw-spindle-rolled-63x10mm-length-1995mm-sku-64063103/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 63x10mm length 1495mm SKU: 64063102](https://maedler.in/product/ball-screw-spindle-rolled-63x10mm-length-1495mm-sku-64063102/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 63x10mm length 995mm SKU: 64063101](https://maedler.in/product/ball-screw-spindle-rolled-63x10mm-length-995mm-sku-64063101/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 50x20mm height 96mm outer diameter 85mm SKU: 64050206](https://maedler.in/product/cylindrical-ball-screw-nut-50x20mm-height-96mm-outer-diameter-85mm-sku-64050206/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 50x20mm height 125mm flange diameter 125mm SKU: 64050205](https://maedler.in/product/flanged-ball-screw-nut-50x20mm-height-125mm-flange-diameter-125mm-sku-64050205/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 50x20mm length 3000mm SKU: 64050204](https://maedler.in/product/ball-screw-spindle-rolled-50x20mm-length-3000mm-sku-64050204/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 50x20mm length 1995mm SKU: 64050203](https://maedler.in/product/ball-screw-spindle-rolled-50x20mm-length-1995mm-sku-64050203/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 50x20mm length 1495mm SKU: 64050202](https://maedler.in/product/ball-screw-spindle-rolled-50x20mm-length-1495mm-sku-64050202/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 50x20mm length 995mm SKU: 64050201](https://maedler.in/product/ball-screw-spindle-rolled-50x20mm-length-995mm-sku-64050201/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 50x10mm height 82mm outer diameter 75mm SKU: 64050106](https://maedler.in/product/cylindrical-ball-screw-nut-50x10mm-height-82mm-outer-diameter-75mm-sku-64050106/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 50x10mm height 95mm flange diameter 110mm SKU: 64050105](https://maedler.in/product/flanged-ball-screw-nut-50x10mm-height-95mm-flange-diameter-110mm-sku-64050105/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 50x10mm length 3000mm SKU: 64050104](https://maedler.in/product/ball-screw-spindle-rolled-50x10mm-length-3000mm-sku-64050104/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 50x10mm length 1995mm SKU: 64050103](https://maedler.in/product/ball-screw-spindle-rolled-50x10mm-length-1995mm-sku-64050103/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 50x10mm length 995mm SKU: 64050102](https://maedler.in/product/ball-screw-spindle-rolled-50x10mm-length-995mm-sku-64050102/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 50x10mm length 995mm SKU: 64050101](https://maedler.in/product/ball-screw-spindle-rolled-50x10mm-length-995mm-sku-64050101/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 40x10mm height 60mm outer diameter 63mm SKU: 64040106](https://maedler.in/product/cylindrical-ball-screw-nut-40x10mm-height-60mm-outer-diameter-63mm-sku-64040106/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 40x10mm height 71mm flange diameter 93mm SKU: 64040105](https://maedler.in/product/flanged-ball-screw-nut-40x10mm-height-71mm-flange-diameter-93mm-sku-64040105/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 40x10mm length 2700mm SKU: 64040104](https://maedler.in/product/ball-screw-spindle-rolled-40x10mm-length-2700mm-sku-64040104/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 40x10mm length 2025mm SKU: 64040103](https://maedler.in/product/ball-screw-spindle-rolled-40x10mm-length-2025mm-sku-64040103/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 40x10mm length 1345mm SKU: 64040102](https://maedler.in/product/ball-screw-spindle-rolled-40x10mm-length-1345mm-sku-64040102/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 40x10mm length 670mm SKU: 64040101](https://maedler.in/product/ball-screw-spindle-rolled-40x10mm-length-670mm-sku-64040101/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 40x5mm height 45mm outer diameter 63mm SKU: 64040056](https://maedler.in/product/cylindrical-ball-screw-nut-40x5mm-height-45mm-outer-diameter-63mm-sku-64040056/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 40x5mm height 55mm flange diameter 93mm SKU: 64040055](https://maedler.in/product/flanged-ball-screw-nut-40x5mm-height-55mm-flange-diameter-93mm-sku-64040055/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 40x5mm length 2800mm SKU: 64040054](https://maedler.in/product/ball-screw-spindle-rolled-40x5mm-length-2800mm-sku-64040054/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 40x5mm length 2100mm SKU: 64040053](https://maedler.in/product/ball-screw-spindle-rolled-40x5mm-length-2100mm-sku-64040053/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 40x5mm length 1395mm SKU: 64040052](https://maedler.in/product/ball-screw-spindle-rolled-40x5mm-length-1395mm-sku-64040052/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 40x5mm length 695mm SKU: 64040051](https://maedler.in/product/ball-screw-spindle-rolled-40x5mm-length-695mm-sku-64040051/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 32x32mm height 88mm outer diameter 56mm SKU: 64032326](https://maedler.in/product/cylindrical-ball-screw-nut-32x32mm-height-88mm-outer-diameter-56mm-sku-64032326/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 32x32mm height 85mm flange diameter 92mm SKU: 64032325](https://maedler.in/product/flanged-ball-screw-nut-32x32mm-height-85mm-flange-diameter-92mm-sku-64032325/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x32mm length 3000mm SKU: 64032324](https://maedler.in/product/ball-screw-spindle-rolled-32x32mm-length-3000mm-sku-64032324/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x32mm length 1995mm SKU: 64032323](https://maedler.in/product/ball-screw-spindle-rolled-32x32mm-length-1995mm-sku-64032323/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x32mm length 1495mm SKU: 64032322](https://maedler.in/product/ball-screw-spindle-rolled-32x32mm-length-1495mm-sku-64032322/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x32mm length 995mm SKU: 64032321](https://maedler.in/product/ball-screw-spindle-rolled-32x32mm-length-995mm-sku-64032321/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 32x20mm height 64mm flange diameter 80mm SKU: 64032205](https://maedler.in/product/flanged-ball-screw-nut-32x20mm-height-64mm-flange-diameter-80mm-sku-64032205/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x20mm length 2700mm SKU: 64032204](https://maedler.in/product/ball-screw-spindle-rolled-32x20mm-length-2700mm-sku-64032204/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x20mm length 2025mm SKU: 64032203](https://maedler.in/product/ball-screw-spindle-rolled-32x20mm-length-2025mm-sku-64032203/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x20mm length 1345mm SKU: 64032202](https://maedler.in/product/ball-screw-spindle-rolled-32x20mm-length-1345mm-sku-64032202/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x20mm length 670mm SKU: 64032201](https://maedler.in/product/ball-screw-spindle-rolled-32x20mm-length-670mm-sku-64032201/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 32x10mm height 60mm outer diameter 53mm SKU: 64032106](https://maedler.in/product/cylindrical-ball-screw-nut-32x10mm-height-60mm-outer-diameter-53mm-sku-64032106/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 32x10mm height 69mm flange diameter 80mm SKU: 64032105](https://maedler.in/product/flanged-ball-screw-nut-32x10mm-height-69mm-flange-diameter-80mm-sku-64032105/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x10mm length 2700mm SKU: 64032104](https://maedler.in/product/ball-screw-spindle-rolled-32x10mm-length-2700mm-sku-64032104/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x10mm length 2025mm SKU: 64032103](https://maedler.in/product/ball-screw-spindle-rolled-32x10mm-length-2025mm-sku-64032103/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x10mm length 1345mm SKU: 64032102](https://maedler.in/product/ball-screw-spindle-rolled-32x10mm-length-1345mm-sku-64032102/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x10mm length 670mm SKU: 64032101](https://maedler.in/product/ball-screw-spindle-rolled-32x10mm-length-670mm-sku-64032101/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 32x5mm height 45mm outer diameter 50mm SKU: 64032056](https://maedler.in/product/cylindrical-ball-screw-nut-32x5mm-height-45mm-outer-diameter-50mm-sku-64032056/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 32x5mm height 55mm flange diameter 80mm SKU: 64032055](https://maedler.in/product/flanged-ball-screw-nut-32x5mm-height-55mm-flange-diameter-80mm-sku-64032055/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x5mm length 2800mm SKU: 64032054](https://maedler.in/product/ball-screw-spindle-rolled-32x5mm-length-2800mm-sku-64032054/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x5mm length 2100mm SKU: 64032053](https://maedler.in/product/ball-screw-spindle-rolled-32x5mm-length-2100mm-sku-64032053/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x5mm length 1395mm SKU: 64032052](https://maedler.in/product/ball-screw-spindle-rolled-32x5mm-length-1395mm-sku-64032052/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 32x5mm length 695mm SKU: 64032051](https://maedler.in/product/ball-screw-spindle-rolled-32x5mm-length-695mm-sku-64032051/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 25x25mm height 67mm flange diameter 74mm SKU: 64025255](https://maedler.in/product/flanged-ball-screw-nut-25x25mm-height-67mm-flange-diameter-74mm-sku-64025255/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x25mm length 2800mm SKU: 64025254](https://maedler.in/product/ball-screw-spindle-rolled-25x25mm-length-2800mm-sku-64025254/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x25mm length 2100mm SKU: 64025253](https://maedler.in/product/ball-screw-spindle-rolled-25x25mm-length-2100mm-sku-64025253/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x25mm length 1395mm SKU: 64025252](https://maedler.in/product/ball-screw-spindle-rolled-25x25mm-length-1395mm-sku-64025252/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x25mm length 695mm SKU: 64025251](https://maedler.in/product/ball-screw-spindle-rolled-25x25mm-length-695mm-sku-64025251/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 25x10mm height 50mm outer diameter 40mm ### total height 50mm ### SKU: 64025106](https://maedler.in/product/cylindrical-ball-screw-nut-25x10mm-height-50mm-outer-diameter-40mm-total-height-50mm-sku-64025106/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 25x10mm height 45mm flange diameter 62mm SKU: 64025105](https://maedler.in/product/flanged-ball-screw-nut-25x10mm-height-45mm-flange-diameter-62mm-sku-64025105/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x10mm length 2700mm SKU: 64025104](https://maedler.in/product/ball-screw-spindle-rolled-25x10mm-length-2700mm-sku-64025104/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x10mm length 2025mm SKU: 64025103](https://maedler.in/product/ball-screw-spindle-rolled-25x10mm-length-2025mm-sku-64025103/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x10mm length 1345mm SKU: 64025102](https://maedler.in/product/ball-screw-spindle-rolled-25x10mm-length-1345mm-sku-64025102/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x10mm length 670mm SKU: 64025101](https://maedler.in/product/ball-screw-spindle-rolled-25x10mm-length-670mm-sku-64025101/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Cylindrical ball screw nut 25x5mm height 34mm outer diameter 40mm SKU: 64025056](https://maedler.in/product/cylindrical-ball-screw-nut-25x5mm-height-34mm-outer-diameter-40mm-sku-64025056/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 25x5mm height 42mm flange diameter 62mm SKU: 64025055](https://maedler.in/product/flanged-ball-screw-nut-25x5mm-height-42mm-flange-diameter-62mm-sku-64025055/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x5mm length 2800mm SKU: 64025054](https://maedler.in/product/ball-screw-spindle-rolled-25x5mm-length-2800mm-sku-64025054/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x5mm length 2100mm SKU: 64025053](https://maedler.in/product/ball-screw-spindle-rolled-25x5mm-length-2100mm-sku-64025053/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x5mm length 1395mm SKU: 64025052](https://maedler.in/product/ball-screw-spindle-rolled-25x5mm-length-1395mm-sku-64025052/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 25x5mm length 695mm SKU: 64025051](https://maedler.in/product/ball-screw-spindle-rolled-25x5mm-length-695mm-sku-64025051/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 20x20mm height 58mm flange diameter 62mm SKU: 64020205](https://maedler.in/product/flanged-ball-screw-nut-20x20mm-height-58mm-flange-diameter-62mm-sku-64020205/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x20mm length 2600mm SKU: 64020204](https://maedler.in/product/ball-screw-spindle-rolled-20x20mm-length-2600mm-sku-64020204/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x20mm length 1950mm SKU: 64020203](https://maedler.in/product/ball-screw-spindle-rolled-20x20mm-length-1950mm-sku-64020203/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x20mm length 1295mm SKU: 64020202](https://maedler.in/product/ball-screw-spindle-rolled-20x20mm-length-1295mm-sku-64020202/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x20mm length 645mm SKU: 64020201](https://maedler.in/product/ball-screw-spindle-rolled-20x20mm-length-645mm-sku-64020201/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Flanged ball screw nut 20x10mm height 56mm flange diameter 58mm SKU: 64020105](https://maedler.in/product/flanged-ball-screw-nut-20x10mm-height-56mm-flange-diameter-58mm-sku-64020105/): Material: Bearing steel 100Cr6, No. 1.3505.To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately.With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C).Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x10mm length 3000mm SKU: 64020104](https://maedler.in/product/ball-screw-spindle-rolled-20x10mm-length-3000mm-sku-64020104/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Ball screw spindle rolled 20x10mm length 1995mm SKU: 64020103](https://maedler.in/product/ball-screw-spindle-rolled-20x10mm-length-1995mm-sku-64020103/): Material: Bearing steel 100Cr6, No. 1.3505, rolled. Tensile strength 1570 N/mm², Brinell hardness 207 HB.• Rolled ball screw spindle.• To be combined with MÄDLER® flanged ball screw nuts and cylindrical ball screw nuts.• Pitch accuracy 52 μm/300 mm (T7).• Straightness 0,1 mm/m.• Special lengths and spindle end reworking against extra charge.Temperature range: -20°C to +80°C (for short time to +110°C).Note: Please refer to the mounting- and operating instruction. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use. - [Spur gear made of stainless steel 1.4305 with hub module 4 30 teeth tooth width 30mm outside diameter 128mm SKU: 23499030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-30-teeth-tooth-width-30mm-outside-diameter-128mm-sku-23499030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 28 teeth tooth width 30mm outside diameter 120mm SKU: 23499028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-28-teeth-tooth-width-30mm-outside-diameter-120mm-sku-23499028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 25 teeth tooth width 30mm outside diameter 108mm SKU: 23499025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-25-teeth-tooth-width-30mm-outside-diameter-108mm-sku-23499025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 24 teeth tooth width 30mm outside diameter 104mm SKU: 23499024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-24-teeth-tooth-width-30mm-outside-diameter-104mm-sku-23499024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 20 teeth tooth width 30mm outside diameter 88mm SKU: 23499020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-20-teeth-tooth-width-30mm-outside-diameter-88mm-sku-23499020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 18 teeth tooth width 30mm outside diameter 80mm SKU: 23499018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-18-teeth-tooth-width-30mm-outside-diameter-80mm-sku-23499018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 16 teeth tooth width 30mm outside diameter 72mm SKU: 23499016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-16-teeth-tooth-width-30mm-outside-diameter-72mm-sku-23499016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 15 teeth tooth width 30mm outside diameter 68mm SKU: 23499015](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-15-teeth-tooth-width-30mm-outside-diameter-68mm-sku-23499015/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 14 teeth tooth width 30mm outside diameter 64mm SKU: 23499014](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-14-teeth-tooth-width-30mm-outside-diameter-64mm-sku-23499014/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 12 teeth tooth width 30mm outside diameter 56mm SKU: 23499012](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-12-teeth-tooth-width-30mm-outside-diameter-56mm-sku-23499012/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23495250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23495250/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23495230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23495230/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23495225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23495225/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23495224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23495224/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23495220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23495220/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with stainless steel core 1.4305 module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23495215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-stainless-steel-core-1-4305-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23495215/): Material: Outer part: Plastic PA 12 G, black. Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 23495060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-23495060/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23495050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23495050/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 45 teeth tooth width 40mm outside diameter 188mm SKU: 23495045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-45-teeth-tooth-width-40mm-outside-diameter-188mm-sku-23495045/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23495040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23495040/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 23495036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-23495036/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23495030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23495030/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23495025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23495025/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23495024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23495024/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23495020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23495020/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 16 teeth tooth width 40mm outside diameter 72mm SKU: 23495016](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-sku-23495016/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23495015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23495015/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with stainless steel core 1.4305 module 4 12 teeth tooth width 40mm outside diameter 56mm SKU: 23495012](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-stainless-steel-core-1-4305-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-sku-23495012/): Material: Outer part: Plastic PA 12 G,white (natural color). Steel core: Stainless steel 1.4305 (AISI 303). Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. Special plastic with excellent material properties. Enables snugly fitting, high strength shaft-hub connection. Optimal force transmission due to cylindrical contact area. Light, silent and clean, with excellent dry running properties. - [Spur gear made of steel C45 with hub module 4 60 teeth tooth width 40mm outside diameter 248mm teeth induction hardened SKU: 23488160](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-teeth-induction-hardened-sku-23488160/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 50 teeth tooth width 40mm outside diameter 208mm teeth induction hardened SKU: 23488150](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-teeth-induction-hardened-sku-23488150/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 40 teeth tooth width 40mm outside diameter 168mm teeth induction hardened SKU: 23488140](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-teeth-induction-hardened-sku-23488140/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 36 teeth tooth width 40mm outside diameter 152mm teeth induction hardened SKU: 23488136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-teeth-induction-hardened-sku-23488136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 35 teeth tooth width 40mm outside diameter 148mm teeth induction hardened SKU: 23488135](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-35-teeth-tooth-width-40mm-outside-diameter-148mm-teeth-induction-hardened-sku-23488135/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 32 teeth tooth width 40mm outside diameter 136mm teeth induction hardened SKU: 23488132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-32-teeth-tooth-width-40mm-outside-diameter-136mm-teeth-induction-hardened-sku-23488132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 30 teeth tooth width 40mm outside diameter 128mm teeth induction hardened SKU: 23488130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-teeth-induction-hardened-sku-23488130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 25 teeth tooth width 40mm outside diameter 108mm teeth induction hardened SKU: 23488125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-teeth-induction-hardened-sku-23488125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 24 teeth tooth width 40mm outside diameter 104mm teeth induction hardened SKU: 23488124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-teeth-induction-hardened-sku-23488124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 22 teeth tooth width 40mm outside diameter 96mm teeth induction hardened SKU: 23488122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-22-teeth-tooth-width-40mm-outside-diameter-96mm-teeth-induction-hardened-sku-23488122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 20 teeth tooth width 40mm outside diameter 88mm teeth induction hardened SKU: 23488120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-teeth-induction-hardened-sku-23488120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 18 teeth tooth width 40mm outside diameter 80mm teeth induction hardened SKU: 23488118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-18-teeth-tooth-width-40mm-outside-diameter-80mm-teeth-induction-hardened-sku-23488118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 17 teeth tooth width 40mm outside diameter 76mm teeth induction hardened SKU: 23488117](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-17-teeth-tooth-width-40mm-outside-diameter-76mm-teeth-induction-hardened-sku-23488117/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 16 teeth tooth width 40mm outside diameter 72mm teeth induction hardened SKU: 23488116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-teeth-induction-hardened-sku-23488116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 15 teeth tooth width 40mm outside diameter 68mm teeth induction hardened SKU: 23488115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-teeth-induction-hardened-sku-23488115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 14 teeth tooth width 40mm outside diameter 64mm teeth induction hardened SKU: 23488114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-14-teeth-tooth-width-40mm-outside-diameter-64mm-teeth-induction-hardened-sku-23488114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 13 teeth tooth width 40mm outside diameter 60mm teeth induction hardened SKU: 23488113](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-13-teeth-tooth-width-40mm-outside-diameter-60mm-teeth-induction-hardened-sku-23488113/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 4 12 teeth tooth width 40mm outside diameter 56mm teeth induction hardened SKU: 23488112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-teeth-induction-hardened-sku-23488112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of plastic PA12G black with steel core module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23455250](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23455250/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23455240](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23455240/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 23455236](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-23455236/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23455230](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23455230/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23455225](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23455225/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23455224](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23455224/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23455220](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23455220/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G black with steel core module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23455215](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-black-with-steel-core-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23455215/): Material: Outer part: Plastic PA 12 G black with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 23455060](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-23455060/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23455050](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23455050/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 45 teeth tooth width 40mm outside diameter 188mm SKU: 23455045](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-45-teeth-tooth-width-40mm-outside-diameter-188mm-sku-23455045/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23455040](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23455040/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 36 teeth tooth width 40mm outside diameter 152mm SKU: 23455036](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-36-teeth-tooth-width-40mm-outside-diameter-152mm-sku-23455036/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23455030](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23455030/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23455025](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23455025/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23455024](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23455024/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23455020](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23455020/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 16 teeth tooth width 40mm outside diameter 72mm SKU: 23455016](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-sku-23455016/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23455015](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23455015/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear made of plastic PA12G natural white with steel core module 4 12 teeth tooth width 40mm outside diameter 56mm SKU: 23455012](https://maedler.in/product/spur-gear-made-of-plastic-pa12g-natural-white-with-steel-core-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-sku-23455012/): Material: Outer part: Plastic PA 12 G, white (natural color) with steel core. Milled, straight teeth. Tooth quality 8e25 DIN 3967. Temperature range -60°C to +120°C, short periods 150°C. - Special plastic with excellent material properties. - Enables snugly fitting, high strength shaft-hub connection. - Optimal force transmission due to cylindrical contact area. - Light, silent and clean, with excellent dry running properties. - [Spur gear stainless steel 1.4305 with hub module 3 60 teeth tooth width 30mm outside diameter 186mm SKU: 23399260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-60-teeth-tooth-width-30mm-outside-diameter-186mm-sku-23399260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 50 teeth tooth width 30mm outside diameter 156mm SKU: 23399250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-50-teeth-tooth-width-30mm-outside-diameter-156mm-sku-23399250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 48 teeth tooth width 30mm outside diameter 150mm SKU: 23399248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-48-teeth-tooth-width-30mm-outside-diameter-150mm-sku-23399248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 45 teeth tooth width 30mm outside diameter 141mm SKU: 23399245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-45-teeth-tooth-width-30mm-outside-diameter-141mm-sku-23399245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 40 teeth tooth width 30mm outside diameter 126mm SKU: 23399240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-40-teeth-tooth-width-30mm-outside-diameter-126mm-sku-23399240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 36 teeth tooth width 30mm outside diameter 114mm SKU: 23399236](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-36-teeth-tooth-width-30mm-outside-diameter-114mm-sku-23399236/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 35 teeth tooth width 30mm outside diameter 111mm SKU: 23399235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-35-teeth-tooth-width-30mm-outside-diameter-111mm-sku-23399235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 30 teeth tooth width 30mm outside diameter 96mm SKU: 23399230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-30-teeth-tooth-width-30mm-outside-diameter-96mm-sku-23399230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 28 teeth tooth width 30mm outside diameter 90mm SKU: 23399228](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-28-teeth-tooth-width-30mm-outside-diameter-90mm-sku-23399228/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 25 teeth tooth width 30mm outside diameter 81mm SKU: 23399225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-25-teeth-tooth-width-30mm-outside-diameter-81mm-sku-23399225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 24 teeth tooth width 30mm outside diameter 78mm SKU: 23399224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-24-teeth-tooth-width-30mm-outside-diameter-78mm-sku-23399224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 22 teeth tooth width 30mm outside diameter 72mm SKU: 23399222](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-22-teeth-tooth-width-30mm-outside-diameter-72mm-sku-23399222/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 20 teeth tooth width 30mm outside diameter 66mm SKU: 23399220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-20-teeth-tooth-width-30mm-outside-diameter-66mm-sku-23399220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 18 teeth tooth width 30mm outside diameter 60mm SKU: 23399218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-18-teeth-tooth-width-30mm-outside-diameter-60mm-sku-23399218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 16 teeth tooth width 30mm outside diameter 54mm SKU: 23399216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-16-teeth-tooth-width-30mm-outside-diameter-54mm-sku-23399216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 15 teeth tooth width 30mm outside diameter 51mm SKU: 23399215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-15-teeth-tooth-width-30mm-outside-diameter-51mm-sku-23399215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 14 teeth tooth width 30mm outside diameter 48mm SKU: 23399214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-14-teeth-tooth-width-30mm-outside-diameter-48mm-sku-23399214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 3 12 teeth tooth width 30mm outside diameter 42mm SKU: 23399212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-3-12-teeth-tooth-width-30mm-outside-diameter-42mm-sku-23399212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 60 teeth tooth width 25mm outside diameter 186mm SKU: 23399060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-60-teeth-tooth-width-25mm-outside-diameter-186mm-sku-23399060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 50 teeth tooth width 25mm outside diameter 156mm SKU: 23399050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-50-teeth-tooth-width-25mm-outside-diameter-156mm-sku-23399050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 48 teeth tooth width 25mm outside diameter 150mm SKU: 23399048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-48-teeth-tooth-width-25mm-outside-diameter-150mm-sku-23399048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 45 teeth tooth width 25mm outside diameter 141mm SKU: 23399045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-45-teeth-tooth-width-25mm-outside-diameter-141mm-sku-23399045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 40 teeth tooth width 25mm outside diameter 126mm SKU: 23399040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-40-teeth-tooth-width-25mm-outside-diameter-126mm-sku-23399040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 36 teeth tooth width 25mm outside diameter 114mm SKU: 23399036](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-36-teeth-tooth-width-25mm-outside-diameter-114mm-sku-23399036/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 35 teeth tooth width 25mm outside diameter 111mm SKU: 23399035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-35-teeth-tooth-width-25mm-outside-diameter-111mm-sku-23399035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 30 teeth tooth width 25mm outside diameter 96mm SKU: 23399030](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-30-teeth-tooth-width-25mm-outside-diameter-96mm-sku-23399030/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 28 teeth tooth width 25mm outside diameter 90mm SKU: 23399028](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-28-teeth-tooth-width-25mm-outside-diameter-90mm-sku-23399028/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 26 teeth tooth width 25mm outside diameter 84mm SKU: 23399026](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-26-teeth-tooth-width-25mm-outside-diameter-84mm-sku-23399026/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 25 teeth tooth width 25mm outside diameter 81mm SKU: 23399025](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-25-teeth-tooth-width-25mm-outside-diameter-81mm-sku-23399025/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 24 teeth tooth width 25mm outside diameter 78mm SKU: 23399024](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-24-teeth-tooth-width-25mm-outside-diameter-78mm-sku-23399024/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 22 teeth tooth width 25mm outside diameter 72mm SKU: 23399022](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-22-teeth-tooth-width-25mm-outside-diameter-72mm-sku-23399022/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 20 teeth tooth width 25mm outside diameter 66mm SKU: 23399020](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-20-teeth-tooth-width-25mm-outside-diameter-66mm-sku-23399020/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 18 teeth tooth width 25mm outside diameter 60mm SKU: 23399018](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-18-teeth-tooth-width-25mm-outside-diameter-60mm-sku-23399018/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 3 16 teeth tooth width 25mm outside diameter 54mm SKU: 23399016](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-3-16-teeth-tooth-width-25mm-outside-diameter-54mm-sku-23399016/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Round trapezoidal nut steel C35Pb Tr.20 x 4 single-start right length 30mm outer diameter 45mm SKU: 64302000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-20-x-4-single-start-right-length-30mm-outer-diameter-45mm-sku-64302000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.18 x 4 single-start right length 27mm outer diameter 40mm SKU: 64301800](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-18-x-4-single-start-right-length-27mm-outer-diameter-40mm-sku-64301800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.16 x 4 single-start right length 24mm outer diameter 36mm SKU: 64301600](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-16-x-4-single-start-right-length-24mm-outer-diameter-36mm-sku-64301600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.14 x 4 single-start right length 21mm outer diameter 30mm SKU: 64301400](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-14-x-4-single-start-right-length-21mm-outer-diameter-30mm-sku-64301400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.12 x 3 single-start right length 18mm outer diameter 26mm SKU: 64301200](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-12-x-3-single-start-right-length-18mm-outer-diameter-26mm-sku-64301200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.10 x 3 single-start right length 15mm outer diameter 22mm SKU: 64301000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-10-x-3-single-start-right-length-15mm-outer-diameter-22mm-sku-64301000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Locknut KMV size 8 M40 x 1,5 steel nickel-plated SKU: 64201740](https://maedler.in/product/locknut-kmv-size-8-m40-x-15-steel-nickel-plated-sku-64201740/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 7 M35 x 1,5 steel nickel-plated SKU: 64201735](https://maedler.in/product/locknut-kmv-size-7-m35-x-15-steel-nickel-plated-sku-64201735/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 6 M30 x 1,5 steel nickel-plated SKU: 64201730](https://maedler.in/product/locknut-kmv-size-6-m30-x-15-steel-nickel-plated-sku-64201730/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 5 M25 x 1,5 steel nickel-plated SKU: 64201725](https://maedler.in/product/locknut-kmv-size-5-m25-x-15-steel-nickel-plated-sku-64201725/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 4 M20 x 1 steel nickel-plated SKU: 64201720](https://maedler.in/product/locknut-kmv-size-4-m20-x-1-steel-nickel-plated-sku-64201720/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 3 M17 x 1 steel nickel-plated SKU: 64201717](https://maedler.in/product/locknut-kmv-size-3-m17-x-1-steel-nickel-plated-sku-64201717/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 2 M15 x 1 steel nickel-plated SKU: 64201715](https://maedler.in/product/locknut-kmv-size-2-m15-x-1-steel-nickel-plated-sku-64201715/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 1 M12 x 1 steel nickel-plated SKU: 64201712](https://maedler.in/product/locknut-kmv-size-1-m12-x-1-steel-nickel-plated-sku-64201712/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 0 M10 x 1 steel nickel-plated SKU: 64201710](https://maedler.in/product/locknut-kmv-size-0-m10-x-1-steel-nickel-plated-sku-64201710/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV M8 x 1 steel nickel-plated SKU: 64201708](https://maedler.in/product/locknut-kmv-m8-x-1-steel-nickel-plated-sku-64201708/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV M6 x 0,75 steel nickel-plated SKU: 64201706](https://maedler.in/product/locknut-kmv-m6-x-075-steel-nickel-plated-sku-64201706/): Material: Steel, nickel-plated, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example, in the MÄDLER® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Flange bearing unit FF 30 bore 30mm material steel nickel plated SKU: 64201630](https://maedler.in/product/flange-bearing-unit-ff-30-bore-30mm-material-steel-nickel-plated-sku-64201630/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 25 bore 25mm material steel nickel plated SKU: 64201625](https://maedler.in/product/flange-bearing-unit-ff-25-bore-25mm-material-steel-nickel-plated-sku-64201625/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 20 bore 20mm material steel nickel plated SKU: 64201620](https://maedler.in/product/flange-bearing-unit-ff-20-bore-20mm-material-steel-nickel-plated-sku-64201620/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 17 bore 17mm material steel nickel plated SKU: 64201617](https://maedler.in/product/flange-bearing-unit-ff-17-bore-17mm-material-steel-nickel-plated-sku-64201617/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 15 bore 15mm material steel nickel plated SKU: 64201615](https://maedler.in/product/flange-bearing-unit-ff-15-bore-15mm-material-steel-nickel-plated-sku-64201615/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 12 bore 10mm material steel nickel plated SKU: 64201612](https://maedler.in/product/flange-bearing-unit-ff-12-bore-10mm-material-steel-nickel-plated-sku-64201612/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 10 bore 8mm material steel nickel plated SKU: 64201610](https://maedler.in/product/flange-bearing-unit-ff-10-bore-8mm-material-steel-nickel-plated-sku-64201610/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 06 bore 6mm material steel nickel plated SKU: 64201606](https://maedler.in/product/flange-bearing-unit-ff-06-bore-6mm-material-steel-nickel-plated-sku-64201606/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 30 bore 30mm material steel nickel plated SKU: 64201530](https://maedler.in/product/flange-bearing-unit-fk-30-bore-30mm-material-steel-nickel-plated-sku-64201530/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 25 bore 25mm material steel nickel plated SKU: 64201525](https://maedler.in/product/flange-bearing-unit-fk-25-bore-25mm-material-steel-nickel-plated-sku-64201525/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 20 bore 20mm material steel nickel plated SKU: 64201520](https://maedler.in/product/flange-bearing-unit-fk-20-bore-20mm-material-steel-nickel-plated-sku-64201520/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 17 bore 17mm material steel nickel plated SKU: 64201517](https://maedler.in/product/flange-bearing-unit-fk-17-bore-17mm-material-steel-nickel-plated-sku-64201517/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 15 bore 15mm material steel nickel plated SKU: 64201515](https://maedler.in/product/flange-bearing-unit-fk-15-bore-15mm-material-steel-nickel-plated-sku-64201515/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 12 bore 12mm material steel nickel plated SKU: 64201512](https://maedler.in/product/flange-bearing-unit-fk-12-bore-12mm-material-steel-nickel-plated-sku-64201512/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 10 bore 10mm material steel nickel plated SKU: 64201510](https://maedler.in/product/flange-bearing-unit-fk-10-bore-10mm-material-steel-nickel-plated-sku-64201510/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 08 bore 8mm material steel nickel plated sealed only at the cylindrical side SKU: 64201508](https://maedler.in/product/flange-bearing-unit-fk-08-bore-8mm-material-steel-nickel-plated-sealed-only-at-the-cylindrical-side-sku-64201508/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 06 bore 6mm material steel nickel plated sealed only at the cylindrical side SKU: 64201506](https://maedler.in/product/flange-bearing-unit-fk-06-bore-6mm-material-steel-nickel-plated-sealed-only-at-the-cylindrical-side-sku-64201506/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 20 bore 20mm material steel nickel plated SKU: 64201420](https://maedler.in/product/pillow-block-bearing-unit-ef-20-bore-20mm-material-steel-nickel-plated-sku-64201420/): Material: Housing from steel, all surfaces machined, nickel-plated. . Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 15 bore 15mm material steel nickel plated SKU: 64201415](https://maedler.in/product/pillow-block-bearing-unit-ef-15-bore-15mm-material-steel-nickel-plated-sku-64201415/): Material: Housing from steel, all surfaces machined, nickel-plated. . Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 12 bore 10mm material steel nickel plated SKU: 64201412](https://maedler.in/product/pillow-block-bearing-unit-ef-12-bore-10mm-material-steel-nickel-plated-sku-64201412/): Material: Housing from steel, all surfaces machined, nickel-plated. . Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 10 bore 8mm material steel nickel plated SKU: 64201410](https://maedler.in/product/pillow-block-bearing-unit-ef-10-bore-8mm-material-steel-nickel-plated-sku-64201410/): Material: Housing from steel, all surfaces machined, nickel-plated. . Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 08 bore 6mm material steel nickel plated SKU: 64201408](https://maedler.in/product/pillow-block-bearing-unit-ef-08-bore-6mm-material-steel-nickel-plated-sku-64201408/): Material: Housing from steel, all surfaces machined, nickel-plated. . Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 06 bore 6mm material steel nickel plated SKU: 64201406](https://maedler.in/product/pillow-block-bearing-unit-ef-06-bore-6mm-material-steel-nickel-plated-sku-64201406/): Material: Housing from steel, all surfaces machined, nickel-plated. . Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 20 bore 20mm material steel nickel plated SKU: 64201320](https://maedler.in/product/pillow-block-bearing-unit-ek-20-bore-20mm-material-steel-nickel-plated-sku-64201320/): Material: Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 15 bore 15mm material steel nickel plated SKU: 64201315](https://maedler.in/product/pillow-block-bearing-unit-ek-15-bore-15mm-material-steel-nickel-plated-sku-64201315/): Material: Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 12 bore 12mm material steel nickel plated SKU: 64201312](https://maedler.in/product/pillow-block-bearing-unit-ek-12-bore-12mm-material-steel-nickel-plated-sku-64201312/): Material: Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 10 bore 10mm material steel nickel plated SKU: 64201310](https://maedler.in/product/pillow-block-bearing-unit-ek-10-bore-10mm-material-steel-nickel-plated-sku-64201310/): Material: Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 08 bore 8mm material steel nickel plated sealed only at the side without the nut SKU: 64201308](https://maedler.in/product/pillow-block-bearing-unit-ek-08-bore-8mm-material-steel-nickel-plated-sealed-only-at-the-side-without-the-nut-sku-64201308/): Material: Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 06 bore 6mm material steel nickel plated sealed only at the side without the nut SKU: 64201306](https://maedler.in/product/pillow-block-bearing-unit-ek-06-bore-6mm-material-steel-nickel-plated-sealed-only-at-the-side-without-the-nut-sku-64201306/): Material: Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 40 bore 40mm material steel nickel plated SKU: 64201240](https://maedler.in/product/pillow-block-bearing-unit-bf-40-bore-40mm-material-steel-nickel-plated-sku-64201240/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 35 bore 35mm material steel nickel plated SKU: 64201235](https://maedler.in/product/pillow-block-bearing-unit-bf-35-bore-35mm-material-steel-nickel-plated-sku-64201235/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 30 bore 30mm material steel nickel plated SKU: 64201230](https://maedler.in/product/pillow-block-bearing-unit-bf-30-bore-30mm-material-steel-nickel-plated-sku-64201230/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 25 bore 25mm material steel nickel plated SKU: 64201225](https://maedler.in/product/pillow-block-bearing-unit-bf-25-bore-25mm-material-steel-nickel-plated-sku-64201225/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 20 bore 20mm material steel nickel plated SKU: 64201220](https://maedler.in/product/pillow-block-bearing-unit-bf-20-bore-20mm-material-steel-nickel-plated-sku-64201220/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 17 bore 17mm material steel nickel plated SKU: 64201217](https://maedler.in/product/pillow-block-bearing-unit-bf-17-bore-17mm-material-steel-nickel-plated-sku-64201217/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 15 bore 15mm material steel nickel plated SKU: 64201215](https://maedler.in/product/pillow-block-bearing-unit-bf-15-bore-15mm-material-steel-nickel-plated-sku-64201215/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 12 bore 10mm material steel nickel plated SKU: 64201212](https://maedler.in/product/pillow-block-bearing-unit-bf-12-bore-10mm-material-steel-nickel-plated-sku-64201212/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BF 10 bore 8mm material steel nickel plated SKU: 64201210](https://maedler.in/product/pillow-block-bearing-unit-bf-10-bore-8mm-material-steel-nickel-plated-sku-64201210/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 6 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing BK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 40 bore 40mm material steel nickel plated SKU: 64201140](https://maedler.in/product/pillow-block-bearing-unit-bk-40-bore-40mm-material-steel-nickel-plated-sku-64201140/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 35 bore 35mm material steel nickel plated SKU: 64201135](https://maedler.in/product/pillow-block-bearing-unit-bk-35-bore-35mm-material-steel-nickel-plated-sku-64201135/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 30 bore 30mm material steel nickel plated SKU: 64201130](https://maedler.in/product/pillow-block-bearing-unit-bk-30-bore-30mm-material-steel-nickel-plated-sku-64201130/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 25 bore 25mm material steel nickel plated SKU: 64201125](https://maedler.in/product/pillow-block-bearing-unit-bk-25-bore-25mm-material-steel-nickel-plated-sku-64201125/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 20 bore 20mm material steel nickel plated SKU: 64201120](https://maedler.in/product/pillow-block-bearing-unit-bk-20-bore-20mm-material-steel-nickel-plated-sku-64201120/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 17 bore 17mm material steel nickel plated SKU: 64201117](https://maedler.in/product/pillow-block-bearing-unit-bk-17-bore-17mm-material-steel-nickel-plated-sku-64201117/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 15 bore 15mm material steel nickel plated SKU: 64201115](https://maedler.in/product/pillow-block-bearing-unit-bk-15-bore-15mm-material-steel-nickel-plated-sku-64201115/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 12 bore 12mm material steel nickel plated SKU: 64201112](https://maedler.in/product/pillow-block-bearing-unit-bk-12-bore-12mm-material-steel-nickel-plated-sku-64201112/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit BK 10 bore 10mm material steel nickel plated SKU: 64201110](https://maedler.in/product/pillow-block-bearing-unit-bk-10-bore-10mm-material-steel-nickel-plated-sku-64201110/): Material: Housing from steel, all surfaces machined, nickel-plated. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. With 8 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing BF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Locknut KMV size 8 M40 x 1,5 steel black oxided SKU: 64200740](https://maedler.in/product/locknut-kmv-size-8-m40-x-15-steel-black-oxided-sku-64200740/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 7 M35 x 1,5 steel black oxided SKU: 64200735](https://maedler.in/product/locknut-kmv-size-7-m35-x-15-steel-black-oxided-sku-64200735/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 6 M30 x 1,5 steel black oxided SKU: 64200730](https://maedler.in/product/locknut-kmv-size-6-m30-x-15-steel-black-oxided-sku-64200730/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 5 M25 x 1,5 steel black oxided SKU: 64200725](https://maedler.in/product/locknut-kmv-size-5-m25-x-15-steel-black-oxided-sku-64200725/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 4 M20 x 1 steel black oxided SKU: 64200720](https://maedler.in/product/locknut-kmv-size-4-m20-x-1-steel-black-oxided-sku-64200720/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 3 M17 x 1 steel black oxided SKU: 64200717](https://maedler.in/product/locknut-kmv-size-3-m17-x-1-steel-black-oxided-sku-64200717/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 2 M15 x 1 steel black oxided SKU: 64200715](https://maedler.in/product/locknut-kmv-size-2-m15-x-1-steel-black-oxided-sku-64200715/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 1 M12 x 1 steel black oxided SKU: 64200712](https://maedler.in/product/locknut-kmv-size-1-m12-x-1-steel-black-oxided-sku-64200712/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV size 0 M10 x 1 steel black oxided SKU: 64200710](https://maedler.in/product/locknut-kmv-size-0-m10-x-1-steel-black-oxided-sku-64200710/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV M8 x 1 steel black oxided SKU: 64200708](https://maedler.in/product/locknut-kmv-m8-x-1-steel-black-oxided-sku-64200708/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMV M6 x 0,75 steel black oxided SKU: 64200706](https://maedler.in/product/locknut-kmv-m6-x-075-steel-black-oxided-sku-64200706/): Material: Steel, black oxided, contact surface ground.Reusable square nut with two integrated locking devices. The locking inserts from brass are pressed with set screws against the shaft thread. KMV locknuts are used, for example,in the MÄDLER ® spindle bearing units BK, EK and FK. They are well suited for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Flange bearing unit FF 30 bore 30mm material steel black oxide finished SKU: 64200630](https://maedler.in/product/flange-bearing-unit-ff-30-bore-30mm-material-steel-black-oxide-finished-sku-64200630/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 25 bore 25mm material steel black oxide finished SKU: 64200625](https://maedler.in/product/flange-bearing-unit-ff-25-bore-25mm-material-steel-black-oxide-finished-sku-64200625/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 20 bore 20mm material steel black oxide finished SKU: 64200620](https://maedler.in/product/flange-bearing-unit-ff-20-bore-20mm-material-steel-black-oxide-finished-sku-64200620/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 17 bore 17mm material steel black oxide finished SKU: 64200617](https://maedler.in/product/flange-bearing-unit-ff-17-bore-17mm-material-steel-black-oxide-finished-sku-64200617/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 15 bore 15mm material steel black oxide finished SKU: 64200615](https://maedler.in/product/flange-bearing-unit-ff-15-bore-15mm-material-steel-black-oxide-finished-sku-64200615/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 12 bore 10mm material steel black oxide finished SKU: 64200612](https://maedler.in/product/flange-bearing-unit-ff-12-bore-10mm-material-steel-black-oxide-finished-sku-64200612/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 10 bore 8mm material steel black oxide finished SKU: 64200610](https://maedler.in/product/flange-bearing-unit-ff-10-bore-8mm-material-steel-black-oxide-finished-sku-64200610/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FF 06 bore 6mm material steel black oxide finished SKU: 64200606](https://maedler.in/product/flange-bearing-unit-ff-06-bore-6mm-material-steel-black-oxide-finished-sku-64200606/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 4 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Flange Bearing FK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 30 bore 30mm material steel black oxide finished SKU: 64200530](https://maedler.in/product/flange-bearing-unit-fk-30-bore-30mm-material-steel-black-oxide-finished-sku-64200530/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 25 bore 25mm material steel black oxide finished SKU: 64200525](https://maedler.in/product/flange-bearing-unit-fk-25-bore-25mm-material-steel-black-oxide-finished-sku-64200525/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 20 bore 20mm material steel black oxide finished SKU: 64200520](https://maedler.in/product/flange-bearing-unit-fk-20-bore-20mm-material-steel-black-oxide-finished-sku-64200520/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 17 bore 17mm material steel black oxide finished SKU: 64200517](https://maedler.in/product/flange-bearing-unit-fk-17-bore-17mm-material-steel-black-oxide-finished-sku-64200517/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 15 bore 15mm material steel black oxide finished SKU: 64200515](https://maedler.in/product/flange-bearing-unit-fk-15-bore-15mm-material-steel-black-oxide-finished-sku-64200515/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 12 bore 12mm material steel black oxide finished SKU: 64200512](https://maedler.in/product/flange-bearing-unit-fk-12-bore-12mm-material-steel-black-oxide-finished-sku-64200512/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 10 bore 10mm material steel black oxide finished SKU: 64200510](https://maedler.in/product/flange-bearing-unit-fk-10-bore-10mm-material-steel-black-oxide-finished-sku-64200510/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 08 bore 8mm material steel black oxide finished sealed only at the cylindrical side SKU: 64200508](https://maedler.in/product/flange-bearing-unit-fk-08-bore-8mm-material-steel-black-oxide-finished-sealed-only-at-the-cylindrical-side-sku-64200508/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Flange bearing unit FK 06 bore 6mm material steel black oxide finished sealed only at the cylindrical side SKU: 64200506](https://maedler.in/product/flange-bearing-unit-fk-06-bore-6mm-material-steel-black-oxide-finished-sealed-only-at-the-cylindrical-side-sku-64200506/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types FK06 and FK08 sealed only on the cylindrical side. With 4 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Flange Bearing FF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 20 bore 20mm material steel black oxide finished SKU: 64200420](https://maedler.in/product/pillow-block-bearing-unit-ef-20-bore-20mm-material-steel-black-oxide-finished-sku-64200420/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 15 bore 15mm material steel black oxide finished SKU: 64200415](https://maedler.in/product/pillow-block-bearing-unit-ef-15-bore-15mm-material-steel-black-oxide-finished-sku-64200415/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 12 bore 10mm material steel black oxide finished SKU: 64200412](https://maedler.in/product/pillow-block-bearing-unit-ef-12-bore-10mm-material-steel-black-oxide-finished-sku-64200412/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 10 bore 8mm material steel black oxide finished SKU: 64200410](https://maedler.in/product/pillow-block-bearing-unit-ef-10-bore-8mm-material-steel-black-oxide-finished-sku-64200410/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 08 bore 6mm material steel black oxide finished SKU: 64200408](https://maedler.in/product/pillow-block-bearing-unit-ef-08-bore-6mm-material-steel-black-oxide-finished-sku-64200408/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EF 06 bore 6mm material steel black oxide finished SKU: 64200406](https://maedler.in/product/pillow-block-bearing-unit-ef-06-bore-6mm-material-steel-black-oxide-finished-sku-64200406/): Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the support side. With one movable single row deep groove ball bearing with shields (2Z). With 2 mounting holes. Retaining ring for fixing on the spindle end is included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for fixed side: Pillow Block Bearing EK. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 20 bore 20mm material steel black oxide finished SKU: 64200320](https://maedler.in/product/pillow-block-bearing-unit-ek-20-bore-20mm-material-steel-black-oxide-finished-sku-64200320/): Material: Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Pillow block bearing unit EK 15 bore 15mm material steel black oxide finished SKU: 64200315](https://maedler.in/product/pillow-block-bearing-unit-ek-15-bore-15mm-material-steel-black-oxide-finished-sku-64200315/): Material: Material: Housing from steel, all surfaces machined, black oxide finished. Ready-to-install housing bearing unit for trapezoidal and ballscrew spindle drives, for the fixed side. With two angular contact ball bearings, lightly preloaded, with seals. Types EK06 and EK08 sealed only on the side without the nut. With 2 mounting holes. Locknut and distance bushes are included. Due to the standard dimensions, these units can also replace parts of other suppliers. Spindle reworking on request. Matching counterpart for support side: Pillow Block Bearing EF. Details for spindle end working, please refer to our catalog page by clicking the button below. - [Precision spur gear made of steel 16MnCr5 module 2 40 teeth bore 25mm hardened and ground outside diameter 84mm SKU: 24184025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-40-teeth-bore-25mm-hardened-and-ground-outside-diameter-84mm-sku-24184025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 40 teeth bore 20mm hardened and ground outside diameter 84mm SKU: 24184020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-40-teeth-bore-20mm-hardened-and-ground-outside-diameter-84mm-sku-24184020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 40 teeth bore 15mm hardened and ground outside diameter 84mm SKU: 24184000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-40-teeth-bore-15mm-hardened-and-ground-outside-diameter-84mm-sku-24184000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 36 teeth bore 25mm hardened and ground outside diameter 76mm SKU: 24183625](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-36-teeth-bore-25mm-hardened-and-ground-outside-diameter-76mm-sku-24183625/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 36 teeth bore 20mm hardened and ground outside diameter 76mm SKU: 24183620](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-36-teeth-bore-20mm-hardened-and-ground-outside-diameter-76mm-sku-24183620/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 36 teeth bore 15mm hardened and ground outside diameter 76mm SKU: 24183600](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-36-teeth-bore-15mm-hardened-and-ground-outside-diameter-76mm-sku-24183600/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 25mm hardened and ground outside diameter 64mm SKU: 24183025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-25mm-hardened-and-ground-outside-diameter-64mm-sku-24183025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 20mm hardened and ground outside diameter 64mm SKU: 24183020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-20mm-hardened-and-ground-outside-diameter-64mm-sku-24183020/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 15mm hardened and ground outside diameter 64mm SKU: 24183000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-15mm-hardened-and-ground-outside-diameter-64mm-sku-24183000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 25 teeth bore 20mm hardened and ground outside diameter 54mm SKU: 24182520](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-25-teeth-bore-20mm-hardened-and-ground-outside-diameter-54mm-sku-24182520/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 25 teeth bore 15mm hardened and ground outside diameter 54mm SKU: 24182500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-25-teeth-bore-15mm-hardened-and-ground-outside-diameter-54mm-sku-24182500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 24 teeth bore 20mm hardened and ground outside diameter 52mm SKU: 24182420](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-24-teeth-bore-20mm-hardened-and-ground-outside-diameter-52mm-sku-24182420/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 24 teeth bore 15mm hardened and ground outside diameter 52mm SKU: 24182415](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-24-teeth-bore-15mm-hardened-and-ground-outside-diameter-52mm-sku-24182415/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 24 teeth bore 12mm hardened and ground outside diameter 52mm SKU: 24182400](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-24-teeth-bore-12mm-hardened-and-ground-outside-diameter-52mm-sku-24182400/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 20 teeth bore 15mm hardened and ground outside diameter 44mm SKU: 24182015](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-20-teeth-bore-15mm-hardened-and-ground-outside-diameter-44mm-sku-24182015/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 20 teeth bore 12mm hardened and ground outside diameter 44mm SKU: 24182000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-20-teeth-bore-12mm-hardened-and-ground-outside-diameter-44mm-sku-24182000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 18 teeth bore 15mm hardened and ground outside diameter 40mm SKU: 24181815](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-18-teeth-bore-15mm-hardened-and-ground-outside-diameter-40mm-sku-24181815/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 18 teeth bore 12mm hardened and ground outside diameter 40mm SKU: 24181800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-18-teeth-bore-12mm-hardened-and-ground-outside-diameter-40mm-sku-24181800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 15 teeth bore 15mm hardened and ground outside diameter 34mm SKU: 24181515](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-15-teeth-bore-15mm-hardened-and-ground-outside-diameter-34mm-sku-24181515/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 15 teeth bore 12mm hardened and ground outside diameter 34mm SKU: 24181500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-15-teeth-bore-12mm-hardened-and-ground-outside-diameter-34mm-sku-24181500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 12 teeth bore 10mm hardened and ground outside diameter 28mm SKU: 24181200](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-12-teeth-bore-10mm-hardened-and-ground-outside-diameter-28mm-sku-24181200/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Spur gear made of steel C45 with hub module 10 32 teeth tooth width 100mm outside diameter 340mm SKU: 23903200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-32-teeth-tooth-width-100mm-outside-diameter-340mm-sku-23903200/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 30 teeth tooth width 100mm outside diameter 320mm SKU: 23903000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-30-teeth-tooth-width-100mm-outside-diameter-320mm-sku-23903000/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 25 teeth tooth width 100mm outside diameter 270mm SKU: 23902500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-25-teeth-tooth-width-100mm-outside-diameter-270mm-sku-23902500/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 24 teeth tooth width 100mm outside diameter 260mm SKU: 23902400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-24-teeth-tooth-width-100mm-outside-diameter-260mm-sku-23902400/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 20 teeth tooth width 100mm outside diameter 220mm SKU: 23902000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-20-teeth-tooth-width-100mm-outside-diameter-220mm-sku-23902000/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 18 teeth tooth width 100mm outside diameter 200mm SKU: 23901800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-18-teeth-tooth-width-100mm-outside-diameter-200mm-sku-23901800/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 17 teeth tooth width 100mm outside diameter 190mm SKU: 23901700](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-17-teeth-tooth-width-100mm-outside-diameter-190mm-sku-23901700/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 16 teeth tooth width 100mm outside diameter 180mm SKU: 23901600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-16-teeth-tooth-width-100mm-outside-diameter-180mm-sku-23901600/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 15 teeth tooth width 100mm outside diameter 170mm SKU: 23901500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-15-teeth-tooth-width-100mm-outside-diameter-170mm-sku-23901500/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 14 teeth tooth width 100mm outside diameter 160mm SKU: 23901400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-14-teeth-tooth-width-100mm-outside-diameter-160mm-sku-23901400/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 10 12 teeth tooth width 100mm outside diameter 140mm SKU: 23901200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-10-12-teeth-tooth-width-100mm-outside-diameter-140mm-sku-23901200/): Tooth Width 100 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 36 teeth tooth width 80mm outside diameter 304mm teeth induction hardened SKU: 23888136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-36-teeth-tooth-width-80mm-outside-diameter-304mm-teeth-induction-hardened-sku-23888136/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 30 teeth tooth width 80mm outside diameter 256mm teeth induction hardened SKU: 23888130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-30-teeth-tooth-width-80mm-outside-diameter-256mm-teeth-induction-hardened-sku-23888130/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 25 teeth tooth width 80mm outside diameter 216mm teeth induction hardened SKU: 23888125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-25-teeth-tooth-width-80mm-outside-diameter-216mm-teeth-induction-hardened-sku-23888125/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 24 teeth tooth width 80mm outside diameter 208mm teeth induction hardened SKU: 23888124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-24-teeth-tooth-width-80mm-outside-diameter-208mm-teeth-induction-hardened-sku-23888124/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 20 teeth tooth width 80mm outside diameter 176mm teeth induction hardened SKU: 23888120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-20-teeth-tooth-width-80mm-outside-diameter-176mm-teeth-induction-hardened-sku-23888120/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 18 teeth tooth width 80mm outside diameter 160mm teeth induction hardened SKU: 23888118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-18-teeth-tooth-width-80mm-outside-diameter-160mm-teeth-induction-hardened-sku-23888118/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 16 teeth tooth width 80mm outside diameter 144mm teeth induction hardened SKU: 23888116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-16-teeth-tooth-width-80mm-outside-diameter-144mm-teeth-induction-hardened-sku-23888116/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 15 teeth tooth width 80mm outside diameter 136mm teeth induction hardened SKU: 23888115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-15-teeth-tooth-width-80mm-outside-diameter-136mm-teeth-induction-hardened-sku-23888115/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 14 teeth tooth width 80mm outside diameter 128mm teeth induction hardened SKU: 23888114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-14-teeth-tooth-width-80mm-outside-diameter-128mm-teeth-induction-hardened-sku-23888114/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 12 teeth tooth width 80mm outside diameter 112mm teeth induction hardened SKU: 23888112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-12-teeth-tooth-width-80mm-outside-diameter-112mm-teeth-induction-hardened-sku-23888112/): Material: Steel C45. Tooth area induction hardened, 54 + 4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10 - 11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 40 teeth tooth width 65mm outside diameter 336mm SKU: 23804000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-40-teeth-tooth-width-65mm-outside-diameter-336mm-sku-23804000/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 36 teeth tooth width 65mm outside diameter 304mm SKU: 23803600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-36-teeth-tooth-width-65mm-outside-diameter-304mm-sku-23803600/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 32 teeth tooth width 65mm outside diameter 272mm SKU: 23803200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-32-teeth-tooth-width-65mm-outside-diameter-272mm-sku-23803200/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 30 teeth tooth width 65mm outside diameter 256mm SKU: 23803000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-30-teeth-tooth-width-65mm-outside-diameter-256mm-sku-23803000/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 25 teeth tooth width 65mm outside diameter 216mm SKU: 23802500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-25-teeth-tooth-width-65mm-outside-diameter-216mm-sku-23802500/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 24 teeth tooth width 65mm outside diameter 208mm SKU: 23802400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-24-teeth-tooth-width-65mm-outside-diameter-208mm-sku-23802400/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 20 teeth tooth width 65mm outside diameter 176mm SKU: 23802000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-20-teeth-tooth-width-65mm-outside-diameter-176mm-sku-23802000/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 18 teeth tooth width 65mm outside diameter 160mm SKU: 23801800](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-18-teeth-tooth-width-65mm-outside-diameter-160mm-sku-23801800/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 16 teeth tooth width 65mm outside diameter 144mm SKU: 23801600](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-16-teeth-tooth-width-65mm-outside-diameter-144mm-sku-23801600/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 15 teeth tooth width 65mm outside diameter 136mm SKU: 23801500](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-15-teeth-tooth-width-65mm-outside-diameter-136mm-sku-23801500/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 14 teeth tooth width 65mm outside diameter 128mm SKU: 23801400](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-14-teeth-tooth-width-65mm-outside-diameter-128mm-sku-23801400/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 8 12 teeth tooth width 65mm outside diameter 112mm SKU: 23801200](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-8-12-teeth-tooth-width-65mm-outside-diameter-112mm-sku-23801200/): Tooth Width 65 mm, with Hub, straight Teeth Material: C45. Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 36 teeth tooth width 60mm outside diameter 228mm teeth induction hardened SKU: 23688136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-36-teeth-tooth-width-60mm-outside-diameter-228mm-teeth-induction-hardened-sku-23688136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 30 teeth tooth width 60mm outside diameter 192mm teeth induction hardened SKU: 23688130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-30-teeth-tooth-width-60mm-outside-diameter-192mm-teeth-induction-hardened-sku-23688130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 25 teeth tooth width 60mm outside diameter 162mm teeth induction hardened SKU: 23688125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-25-teeth-tooth-width-60mm-outside-diameter-162mm-teeth-induction-hardened-sku-23688125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 24 teeth tooth width 60mm outside diameter 156mm teeth induction hardened SKU: 23688124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-24-teeth-tooth-width-60mm-outside-diameter-156mm-teeth-induction-hardened-sku-23688124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 22 teeth tooth width 60mm outside diameter 144mm teeth induction hardened SKU: 23688122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-22-teeth-tooth-width-60mm-outside-diameter-144mm-teeth-induction-hardened-sku-23688122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 20 teeth tooth width 60mm outside diameter 132mm teeth induction hardened SKU: 23688120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-20-teeth-tooth-width-60mm-outside-diameter-132mm-teeth-induction-hardened-sku-23688120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 18 teeth tooth width 60mm outside diameter 120mm teeth induction hardened SKU: 23688118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-18-teeth-tooth-width-60mm-outside-diameter-120mm-teeth-induction-hardened-sku-23688118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 16 teeth tooth width 60mm outside diameter 108mm teeth induction hardened SKU: 23688116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-16-teeth-tooth-width-60mm-outside-diameter-108mm-teeth-induction-hardened-sku-23688116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 15 teeth tooth width 60mm outside diameter 102mm teeth induction hardened SKU: 23688115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-15-teeth-tooth-width-60mm-outside-diameter-102mm-teeth-induction-hardened-sku-23688115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 14 teeth tooth width 60mm outside diameter 96mm teeth induction hardened SKU: 23688114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-14-teeth-tooth-width-60mm-outside-diameter-96mm-teeth-induction-hardened-sku-23688114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 6 12 teeth tooth width 60mm outside diameter 84mm teeth induction hardened SKU: 23688112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-6-12-teeth-tooth-width-60mm-outside-diameter-84mm-teeth-induction-hardened-sku-23688112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 36 teeth tooth width 50mm outside diameter 190mm teeth induction hardened SKU: 23588136](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-36-teeth-tooth-width-50mm-outside-diameter-190mm-teeth-induction-hardened-sku-23588136/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 32 teeth tooth width 50mm outside diameter 170mm teeth induction hardened SKU: 23588132](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-32-teeth-tooth-width-50mm-outside-diameter-170mm-teeth-induction-hardened-sku-23588132/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 30 teeth tooth width 50mm outside diameter 160mm teeth induction hardened SKU: 23588130](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-30-teeth-tooth-width-50mm-outside-diameter-160mm-teeth-induction-hardened-sku-23588130/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 25 teeth tooth width 50mm outside diameter 135mm teeth induction hardened SKU: 23588125](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-25-teeth-tooth-width-50mm-outside-diameter-135mm-teeth-induction-hardened-sku-23588125/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 24 teeth tooth width 50mm outside diameter 130mm teeth induction hardened SKU: 23588124](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-24-teeth-tooth-width-50mm-outside-diameter-130mm-teeth-induction-hardened-sku-23588124/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 22 teeth tooth width 50mm outside diameter 120mm teeth induction hardened SKU: 23588122](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-22-teeth-tooth-width-50mm-outside-diameter-120mm-teeth-induction-hardened-sku-23588122/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 20 teeth tooth width 50mm outside diameter 110mm teeth induction hardened SKU: 23588120](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-20-teeth-tooth-width-50mm-outside-diameter-110mm-teeth-induction-hardened-sku-23588120/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 18 teeth tooth width 50mm outside diameter 100mm teeth induction hardened SKU: 23588118](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-18-teeth-tooth-width-50mm-outside-diameter-100mm-teeth-induction-hardened-sku-23588118/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 16 teeth tooth width 50mm outside diameter 90mm teeth induction hardened SKU: 23588116](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-16-teeth-tooth-width-50mm-outside-diameter-90mm-teeth-induction-hardened-sku-23588116/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 15 teeth tooth width 50mm outside diameter 85mm teeth induction hardened SKU: 23588115](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-15-teeth-tooth-width-50mm-outside-diameter-85mm-teeth-induction-hardened-sku-23588115/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 14 teeth tooth width 50mm outside diameter 80mm teeth induction hardened SKU: 23588114](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-14-teeth-tooth-width-50mm-outside-diameter-80mm-teeth-induction-hardened-sku-23588114/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 12 teeth tooth width 50mm outside diameter 70mm teeth induction hardened SKU: 23588112](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-12-teeth-tooth-width-50mm-outside-diameter-70mm-teeth-induction-hardened-sku-23588112/): Material: Steel C45. Tooth area induction hardened, 54 +4 HRC. Teeth milled in quality 8d25 DIN 3967. The hardening sets the tooth quality to 10-11. Straight teeth. Pressure angle 20°. - [Spur gear made of steel C45 with hub module 5 30 teeth tooth width 40mm outside diameter 160mm SKU: 23503000](https://maedler.in/product/spur-gear-made-of-steel-c45-with-hub-module-5-30-teeth-tooth-width-40mm-outside-diameter-160mm-sku-23503000/): Werkstoff: Stahl St37, verzinkt. Diese elastische Lagerung für Elektromotoren kompensiert automatisch die Riemenlängung und die hohen Anlaufmomente. Sie isoliert Körperschall. Schwingungen des Riementriebes werden nicht in die Maschine geleitet. Über die Vorspanneinheit lässt sich die Riemenspannung komfortabel einstellen. Die Motorplatte und eine Positionierungsanleitung gehören zum Lieferumfang. Die Motorplatte ist montagefertig gebohrt für folgende Motorgrößen: 132S, 132M, 160M, 160L. - [Spur gear stainless steel 1.4305 with hub module 4 60 teeth tooth width 40mm outside diameter 248mm SKU: 23499260](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-60-teeth-tooth-width-40mm-outside-diameter-248mm-sku-23499260/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 50 teeth tooth width 40mm outside diameter 208mm SKU: 23499250](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-50-teeth-tooth-width-40mm-outside-diameter-208mm-sku-23499250/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 48 teeth tooth width 40mm outside diameter 200mm SKU: 23499248](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-48-teeth-tooth-width-40mm-outside-diameter-200mm-sku-23499248/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 45 teeth tooth width 40mm outside diameter 188mm SKU: 23499245](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-45-teeth-tooth-width-40mm-outside-diameter-188mm-sku-23499245/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 40 teeth tooth width 40mm outside diameter 168mm SKU: 23499240](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-40-teeth-tooth-width-40mm-outside-diameter-168mm-sku-23499240/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 35 teeth tooth width 40mm outside diameter 148mm SKU: 23499235](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-35-teeth-tooth-width-40mm-outside-diameter-148mm-sku-23499235/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 30 teeth tooth width 40mm outside diameter 128mm SKU: 23499230](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-30-teeth-tooth-width-40mm-outside-diameter-128mm-sku-23499230/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 25 teeth tooth width 40mm outside diameter 108mm SKU: 23499225](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-25-teeth-tooth-width-40mm-outside-diameter-108mm-sku-23499225/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 24 teeth tooth width 40mm outside diameter 104mm SKU: 23499224](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-24-teeth-tooth-width-40mm-outside-diameter-104mm-sku-23499224/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 20 teeth tooth width 40mm outside diameter 88mm SKU: 23499220](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-20-teeth-tooth-width-40mm-outside-diameter-88mm-sku-23499220/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 18 teeth tooth width 40mm outside diameter 80mm SKU: 23499218](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-18-teeth-tooth-width-40mm-outside-diameter-80mm-sku-23499218/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 16 teeth tooth width 40mm outside diameter 72mm SKU: 23499216](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-16-teeth-tooth-width-40mm-outside-diameter-72mm-sku-23499216/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 15 teeth tooth width 40mm outside diameter 68mm SKU: 23499215](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-15-teeth-tooth-width-40mm-outside-diameter-68mm-sku-23499215/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 14 teeth tooth width 40mm outside diameter 64mm SKU: 23499214](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-14-teeth-tooth-width-40mm-outside-diameter-64mm-sku-23499214/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 13 teeth tooth width 40mm outside diameter 60mm SKU: 23499213](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-13-teeth-tooth-width-40mm-outside-diameter-60mm-sku-23499213/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear stainless steel 1.4305 with hub module 4 12 teeth tooth width 40mm outside diameter 56mm SKU: 23499212](https://maedler.in/product/spur-gear-stainless-steel-1-4305-with-hub-module-4-12-teeth-tooth-width-40mm-outside-diameter-56mm-sku-23499212/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 60 teeth tooth width 30mm outside diameter 248mm SKU: 23499060](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-60-teeth-tooth-width-30mm-outside-diameter-248mm-sku-23499060/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 50 teeth tooth width 30mm outside diameter 208mm SKU: 23499050](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-50-teeth-tooth-width-30mm-outside-diameter-208mm-sku-23499050/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 48 teeth tooth width 30mm outside diameter 200mm SKU: 23499048](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-48-teeth-tooth-width-30mm-outside-diameter-200mm-sku-23499048/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 45 teeth tooth width 30mm outside diameter 188mm SKU: 23499045](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-45-teeth-tooth-width-30mm-outside-diameter-188mm-sku-23499045/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 40 teeth tooth width 30mm outside diameter 168mm SKU: 23499040](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-40-teeth-tooth-width-30mm-outside-diameter-168mm-sku-23499040/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Spur gear made of stainless steel 1.4305 with hub module 4 35 teeth tooth width 30mm outside diameter 148mm SKU: 23499035](https://maedler.in/product/spur-gear-made-of-stainless-steel-1-4305-with-hub-module-4-35-teeth-tooth-width-30mm-outside-diameter-148mm-sku-23499035/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Tooth quality 8d25 DIN 3967. Pressure angle 20°. - [Hexagonal trapezoidal nut steel C35Pb Tr.18 x 4 single-start left length 27mm wrench size 27mm SKU: 64361800](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-18-x-4-single-start-left-length-27mm-wrench-size-27mm-sku-64361800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.16 x 4 single-start left length 24mm wrench size 27mm SKU: 64361600](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-16-x-4-single-start-left-length-24mm-wrench-size-27mm-sku-64361600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.14 x 4 single-start left length 21mm wrench size 22mm SKU: 64361400](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-14-x-4-single-start-left-length-21mm-wrench-size-22mm-sku-64361400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.12 x 3 single-start left length 18mm wrench size 19mm SKU: 64361200](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-12-x-3-single-start-left-length-18mm-wrench-size-19mm-sku-64361200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.10 x 3 single-start left length 15mm wrench size 17mm SKU: 64361000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-10-x-3-single-start-left-length-15mm-wrench-size-17mm-sku-64361000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.70 x 10 single-start left length 105mm outer diameter 110mm SKU: 64357000](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-70-x-10-single-start-left-length-105mm-outer-diameter-110mm-sku-64357000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.60 x 9 single-start left length 90mm outer diameter 100mm SKU: 64356000](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-60-x-9-single-start-left-length-90mm-outer-diameter-100mm-sku-64356000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.52 x 8 single-start left length 78mm outer diameter 90mm SKU: 64355200](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-52-x-8-single-start-left-length-78mm-outer-diameter-90mm-sku-64355200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.50 x 8 single-start left length 75mm outer diameter 90mm SKU: 64355000](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-50-x-8-single-start-left-length-75mm-outer-diameter-90mm-sku-64355000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.48 x 8 single-start left length 72mm outer diameter 90mm SKU: 64354800](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-48-x-8-single-start-left-length-72mm-outer-diameter-90mm-sku-64354800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.44 x 7 single-start left length 66mm outer diameter 80mm SKU: 64354400](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-44-x-7-single-start-left-length-66mm-outer-diameter-80mm-sku-64354400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.40 x 7 single-start left length 60mm outer diameter 80mm SKU: 64354000](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-40-x-7-single-start-left-length-60mm-outer-diameter-80mm-sku-64354000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.36 x 6 single-start left length 54mm outer diameter 75mm SKU: 64353600](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-36-x-6-single-start-left-length-54mm-outer-diameter-75mm-sku-64353600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.32 x 6 single-start left length 48mm outer diameter 60mm SKU: 64353200](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-32-x-6-single-start-left-length-48mm-outer-diameter-60mm-sku-64353200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.30 x 6 single-start left length 45mm outer diameter 60mm SKU: 64353000](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-30-x-6-single-start-left-length-45mm-outer-diameter-60mm-sku-64353000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.28 x 5 single-start left length 42mm outer diameter 60mm SKU: 64352800](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-28-x-5-single-start-left-length-42mm-outer-diameter-60mm-sku-64352800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.24 x 5 single-start left length 36mm outer diameter 50mm SKU: 64352400](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-24-x-5-single-start-left-length-36mm-outer-diameter-50mm-sku-64352400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.20 x 4 single-start left length 30mm outer diameter 45mm SKU: 64352000](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-20-x-4-single-start-left-length-30mm-outer-diameter-45mm-sku-64352000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.18 x 4 single-start left length 27mm outer diameter 40mm SKU: 64351800](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-18-x-4-single-start-left-length-27mm-outer-diameter-40mm-sku-64351800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.16 x 4 single-start left length 24mm outer diameter 36mm SKU: 64351600](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-16-x-4-single-start-left-length-24mm-outer-diameter-36mm-sku-64351600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.14 x 4 single-start left length 21mm outer diameter 30mm SKU: 64351400](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-14-x-4-single-start-left-length-21mm-outer-diameter-30mm-sku-64351400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.12 x 3 single-start left length 18mm outer diameter 26mm SKU: 64351200](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-12-x-3-single-start-left-length-18mm-outer-diameter-26mm-sku-64351200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut C35Pb Tr.10 x 3 single-start left length 15mm outer diameter 22mm SKU: 64351000](https://maedler.in/product/round-trapezoidal-nut-c35pb-tr-10-x-3-single-start-left-length-15mm-outer-diameter-22mm-sku-64351000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut nylatron Tr.60 x 9 single-start right length 120mm outer diameter 100mm SKU: 64346000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-60-x-9-single-start-right-length-120mm-outer-diameter-100mm-sku-64346000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.50 x 8 single-start right length 100mm outer diameter 90mm SKU: 64345000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-50-x-8-single-start-right-length-100mm-outer-diameter-90mm-sku-64345000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.40 x 7 single-start right length 80mm outer diameter 80mm SKU: 64344000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-40-x-7-single-start-right-length-80mm-outer-diameter-80mm-sku-64344000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.36 x 6 single-start right length 72mm outer diameter 75mm SKU: 64343600](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-36-x-6-single-start-right-length-72mm-outer-diameter-75mm-sku-64343600/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.32 x 6 single-start right length 64mm outer diameter 60mm SKU: 64343200](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-32-x-6-single-start-right-length-64mm-outer-diameter-60mm-sku-64343200/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.30 x 6 single-start right length 60mm outer diameter 60mm SKU: 64343000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-30-x-6-single-start-right-length-60mm-outer-diameter-60mm-sku-64343000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.28 x 5 single-start right length 56mm outer diameter 60mm SKU: 64342800](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-28-x-5-single-start-right-length-56mm-outer-diameter-60mm-sku-64342800/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.24 x 5 single-start right length 48mm outer diameter 50mm SKU: 64342400](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-24-x-5-single-start-right-length-48mm-outer-diameter-50mm-sku-64342400/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.20 x 4 single-start right length 40mm outer diameter 45mm SKU: 64342000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-20-x-4-single-start-right-length-40mm-outer-diameter-45mm-sku-64342000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.18 x 4 single-start right length 36mm outer diameter 40mm SKU: 64341800](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-18-x-4-single-start-right-length-36mm-outer-diameter-40mm-sku-64341800/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.16 x 4 single-start right length 32mm outer diameter 36mm SKU: 64341600](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-16-x-4-single-start-right-length-32mm-outer-diameter-36mm-sku-64341600/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.12 x 3 single-start right length 24mm outer diameter 26mm SKU: 64341200](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-12-x-3-single-start-right-length-24mm-outer-diameter-26mm-sku-64341200/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.70 x 10 single-start right length 120mm outer diameter 110mm SKU: 64337000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-70-x-10-single-start-right-length-120mm-outer-diameter-110mm-sku-64337000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.60 x 9 single-start right length 120mm outer diameter 100mm SKU: 64336000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-60-x-9-single-start-right-length-120mm-outer-diameter-100mm-sku-64336000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.52 x 8 single-start right length 104mm outer diameter 90mm SKU: 64335200](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-52-x-8-single-start-right-length-104mm-outer-diameter-90mm-sku-64335200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.50 x 8 single-start right length 100mm outer diameter 90mm SKU: 64335000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-50-x-8-single-start-right-length-100mm-outer-diameter-90mm-sku-64335000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.48 x 8 single-start right length 96mm outer diameter 90mm SKU: 64334800](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-48-x-8-single-start-right-length-96mm-outer-diameter-90mm-sku-64334800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.44 x 7 single-start right length 88mm outer diameter 80mm SKU: 64334400](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-44-x-7-single-start-right-length-88mm-outer-diameter-80mm-sku-64334400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.40 x 7 single-start right length 80mm outer diameter 80mm SKU: 64334000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-40-x-7-single-start-right-length-80mm-outer-diameter-80mm-sku-64334000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.36 x 6 single-start right length 72mm outer diameter 75mm SKU: 64333600](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-36-x-6-single-start-right-length-72mm-outer-diameter-75mm-sku-64333600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.32 x 6 single-start right length 64mm outer diameter 60mm SKU: 64333200](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-32-x-6-single-start-right-length-64mm-outer-diameter-60mm-sku-64333200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.30 x 6 single-start right length 60mm outer diameter 60mm SKU: 64333000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-30-x-6-single-start-right-length-60mm-outer-diameter-60mm-sku-64333000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.28 x 5 single-start right length 56mm outer diameter 60mm SKU: 64332800](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-28-x-5-single-start-right-length-56mm-outer-diameter-60mm-sku-64332800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.24 x 5 single-start right length 48mm outer diameter 50mm SKU: 64332400](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-24-x-5-single-start-right-length-48mm-outer-diameter-50mm-sku-64332400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.20 x 4 single-start right length 40mm outer diameter 45mm SKU: 64332000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-20-x-4-single-start-right-length-40mm-outer-diameter-45mm-sku-64332000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.18 x 4 single-start right length 36mm outer diameter 40mm SKU: 64331800](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-18-x-4-single-start-right-length-36mm-outer-diameter-40mm-sku-64331800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.16 x 4 single-start right length 32mm outer diameter 36mm SKU: 64331600](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-16-x-4-single-start-right-length-32mm-outer-diameter-36mm-sku-64331600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.14 x 4 single-start right length 28mm outer diameter 30mm SKU: 64331400](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-14-x-4-single-start-right-length-28mm-outer-diameter-30mm-sku-64331400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.12 x 3 single-start right length 24mm outer diameter 26mm SKU: 64331200](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-12-x-3-single-start-right-length-24mm-outer-diameter-26mm-sku-64331200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.10 x 3 single-start right length 20mm outer diameter 22mm SKU: 64331000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-10-x-3-single-start-right-length-20mm-outer-diameter-22mm-sku-64331000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut steel C35Pb Tr.60 x 9 single-start right length 120mm outer diameter 100mm SKU: 64326000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-60-x-9-single-start-right-length-120mm-outer-diameter-100mm-sku-64326000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.52 x 8 single-start right length 104mm outer diameter 90mm SKU: 64325200](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-52-x-8-single-start-right-length-104mm-outer-diameter-90mm-sku-64325200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.50 x 8 single-start right length 100mm outer diameter 90mm SKU: 64325000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-50-x-8-single-start-right-length-100mm-outer-diameter-90mm-sku-64325000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.48 x 8 single-start right length 96mm outer diameter 90mm SKU: 64324800](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-48-x-8-single-start-right-length-96mm-outer-diameter-90mm-sku-64324800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.44 x 7 single-start right length 88mm outer diameter 80mm SKU: 64324400](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-44-x-7-single-start-right-length-88mm-outer-diameter-80mm-sku-64324400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.40 x 7 single-start right length 80mm outer diameter 80mm SKU: 64324000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-40-x-7-single-start-right-length-80mm-outer-diameter-80mm-sku-64324000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.36 x 6 single-start right length 72mm outer diameter 75mm SKU: 64323600](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-36-x-6-single-start-right-length-72mm-outer-diameter-75mm-sku-64323600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.32 x 6 single-start right length 64mm outer diameter 60mm SKU: 64323200](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-32-x-6-single-start-right-length-64mm-outer-diameter-60mm-sku-64323200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.30 x 6 single-start right length 60mm outer diameter 60mm SKU: 64323000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-30-x-6-single-start-right-length-60mm-outer-diameter-60mm-sku-64323000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.28 x 5 single-start right length 56mm outer diameter 60mm SKU: 64322800](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-28-x-5-single-start-right-length-56mm-outer-diameter-60mm-sku-64322800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.24 x 5 single-start right length 48mm outer diameter 50mm SKU: 64322400](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-24-x-5-single-start-right-length-48mm-outer-diameter-50mm-sku-64322400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.20 x 4 single-start right length 40mm outer diameter 45mm SKU: 64322000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-20-x-4-single-start-right-length-40mm-outer-diameter-45mm-sku-64322000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.18 x 4 single-start right length 36mm outer diameter 40mm SKU: 64321800](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-18-x-4-single-start-right-length-36mm-outer-diameter-40mm-sku-64321800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.16 x 4 single-start right length 32mm outer diameter 36mm SKU: 64321600](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-16-x-4-single-start-right-length-32mm-outer-diameter-36mm-sku-64321600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.14 x 4 single-start right length 28mm outer diameter 30mm SKU: 64321400](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-14-x-4-single-start-right-length-28mm-outer-diameter-30mm-sku-64321400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.12 x 3 single-start right length 24mm outer diameter 26mm SKU: 64321200](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-12-x-3-single-start-right-length-24mm-outer-diameter-26mm-sku-64321200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.10 x 3 single-start right length 20mm outer diameter 22mm SKU: 64321000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-10-x-3-single-start-right-length-20mm-outer-diameter-22mm-sku-64321000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.70 x 10 single-start right length 105mm wrench size 90mm SKU: 64317000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-70-x-10-single-start-right-length-105mm-wrench-size-90mm-sku-64317000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.60 x 9 single-start right length 90mm wrench size 90mm SKU: 64316000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-60-x-9-single-start-right-length-90mm-wrench-size-90mm-sku-64316000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.52 x 8 single-start right length 78mm wrench size 75mm SKU: 64315200](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-52-x-8-single-start-right-length-78mm-wrench-size-75mm-sku-64315200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.50 x 8 single-start right length 75mm wrench size 75mm SKU: 64315000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-50-x-8-single-start-right-length-75mm-wrench-size-75mm-sku-64315000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.48 x 8 single-start right length 72mm wrench size 75mm SKU: 64314800](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-48-x-8-single-start-right-length-72mm-wrench-size-75mm-sku-64314800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.44 x 7 single-start right length 66mm wrench size 65mm SKU: 64314400](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-44-x-7-single-start-right-length-66mm-wrench-size-65mm-sku-64314400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.40 x 7 single-start right length 60mm wrench size 65mm SKU: 64314000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-40-x-7-single-start-right-length-60mm-wrench-size-65mm-sku-64314000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.36 x 6 single-start right length 54mm wrench size 55mm SKU: 64313600](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-36-x-6-single-start-right-length-54mm-wrench-size-55mm-sku-64313600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.32 x 6 single-start right length 48mm wrench size 46mm SKU: 64313200](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-32-x-6-single-start-right-length-48mm-wrench-size-46mm-sku-64313200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.30 x 6 single-start right length 45mm wrench size 46mm SKU: 64313000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-30-x-6-single-start-right-length-45mm-wrench-size-46mm-sku-64313000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.28 x 5 single-start right length 42mm wrench size 46mm SKU: 64312800](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-28-x-5-single-start-right-length-42mm-wrench-size-46mm-sku-64312800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.24 x 5 single-start right length 36mm wrench size 36mm SKU: 64312400](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-24-x-5-single-start-right-length-36mm-wrench-size-36mm-sku-64312400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.20 x 4 single-start right length 30mm wrench size 30mm SKU: 64312000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-20-x-4-single-start-right-length-30mm-wrench-size-30mm-sku-64312000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.18 x 4 single-start right length 27mm wrench size 27mm SKU: 64311800](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-18-x-4-single-start-right-length-27mm-wrench-size-27mm-sku-64311800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.16 x 4 single-start right length 24mm wrench size 27mm SKU: 64311600](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-16-x-4-single-start-right-length-24mm-wrench-size-27mm-sku-64311600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.14 x 4 single-start right length 21mm wrench size 22mm SKU: 64311400](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-14-x-4-single-start-right-length-21mm-wrench-size-22mm-sku-64311400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.12 x 3 single-start right length 18mm wrench size 19mm SKU: 64311200](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-12-x-3-single-start-right-length-18mm-wrench-size-19mm-sku-64311200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.10 x 3 single-start right length 15mm wrench size 17mm SKU: 64311000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-10-x-3-single-start-right-length-15mm-wrench-size-17mm-sku-64311000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.70 x 10 single-start right length 105mm outer diameter 110mm SKU: 64307000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-70-x-10-single-start-right-length-105mm-outer-diameter-110mm-sku-64307000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.60 x 9 single-start right length 90mm outer diameter 100mm SKU: 64306000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-60-x-9-single-start-right-length-90mm-outer-diameter-100mm-sku-64306000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.52 x 8 single-start right length 78mm outer diameter 90mm SKU: 64305200](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-52-x-8-single-start-right-length-78mm-outer-diameter-90mm-sku-64305200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.50 x 8 single-start right length 75mm outer diameter 90mm SKU: 64305000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-50-x-8-single-start-right-length-75mm-outer-diameter-90mm-sku-64305000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.48 x 8 single-start right length 72mm outer diameter 90mm SKU: 64304800](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-48-x-8-single-start-right-length-72mm-outer-diameter-90mm-sku-64304800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.44 x 7 single-start right length 66mm outer diameter 80mm SKU: 64304400](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-44-x-7-single-start-right-length-66mm-outer-diameter-80mm-sku-64304400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.40 x 7 single-start right length 60mm outer diameter 80mm SKU: 64304000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-40-x-7-single-start-right-length-60mm-outer-diameter-80mm-sku-64304000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.36 x 6 single-start right length 54mm outer diameter 75mm SKU: 64303600](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-36-x-6-single-start-right-length-54mm-outer-diameter-75mm-sku-64303600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.32 x 6 single-start right length 48mm outer diameter 60mm SKU: 64303200](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-32-x-6-single-start-right-length-48mm-outer-diameter-60mm-sku-64303200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.30 x 6 single-start right length 45mm outer diameter 60mm SKU: 64303000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-30-x-6-single-start-right-length-45mm-outer-diameter-60mm-sku-64303000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.28 x 5 single-start right length 42mm outer diameter 60mm SKU: 64302800](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-28-x-5-single-start-right-length-42mm-outer-diameter-60mm-sku-64302800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.24 x 5 single-start right length 36mm outer diameter 50mm SKU: 64302400](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-24-x-5-single-start-right-length-36mm-outer-diameter-50mm-sku-64302400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Spur gear made of brass Ms58 with hub module 0.5 18 teeth tooth width 2mm outside diameter 10mm SKU: 26101800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-18-teeth-tooth-width-2mm-outside-diameter-10mm-sku-26101800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 17 teeth tooth width 2mm outside diameter 9.5mm SKU: 26101700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-17-teeth-tooth-width-2mm-outside-diameter-9-5mm-sku-26101700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 16 teeth tooth width 2mm outside diameter 9mm SKU: 26101600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-16-teeth-tooth-width-2mm-outside-diameter-9mm-sku-26101600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 15 teeth tooth width 2mm outside diameter 8.5mm SKU: 26101500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-15-teeth-tooth-width-2mm-outside-diameter-8-5mm-sku-26101500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 14 teeth tooth width 2mm outside diameter 8mm SKU: 26101400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-14-teeth-tooth-width-2mm-outside-diameter-8mm-sku-26101400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 13 teeth tooth width 2mm outside diameter 7.5mm SKU: 26101300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-13-teeth-tooth-width-2mm-outside-diameter-7-5mm-sku-26101300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 12 teeth tooth width 2mm outside diameter 7mm SKU: 26101200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-12-teeth-tooth-width-2mm-outside-diameter-7mm-sku-26101200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 10 teeth tooth width 2mm outside diameter 6mm SKU: 26101000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-10-teeth-tooth-width-2mm-outside-diameter-6mm-sku-26101000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.3 120 teeth tooth width 2mm outside diameter 36.6mm SKU: 26012000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-120-teeth-tooth-width-2mm-outside-diameter-36-6mm-sku-26012000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 100 teeth tooth width 2mm outside diameter 30.6mm SKU: 26010000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-100-teeth-tooth-width-2mm-outside-diameter-30-6mm-sku-26010000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 80 teeth tooth width 2mm outside diameter 24.6mm SKU: 26008000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-80-teeth-tooth-width-2mm-outside-diameter-24-6mm-sku-26008000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 60 teeth tooth width 2mm outside diameter 18.6mm SKU: 26006000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-60-teeth-tooth-width-2mm-outside-diameter-18-6mm-sku-26006000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 50 teeth tooth width 2mm outside diameter 15.6mm SKU: 26005000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-50-teeth-tooth-width-2mm-outside-diameter-15-6mm-sku-26005000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 with hub module 0.3 40 teeth tooth width 2mm outside diameter 12.6mm SKU: 26004000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-40-teeth-tooth-width-2mm-outside-diameter-12-6mm-sku-26004000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 30 teeth tooth width 5mm (full-length cut) outside diameter 9.6mm SKU: 26003000](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-30-teeth-tooth-width-5mm-full-length-cut-outside-diameter-9-6mm-sku-26003000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 25 teeth tooth width 5mm (full-length cut) outside diameter 8.1mm SKU: 26002500](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-25-teeth-tooth-width-5mm-full-length-cut-outside-diameter-8-1mm-sku-26002500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 24 teeth tooth width 5mm (full-length cut) outside diameter 7.8mm SKU: 26002400](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-24-teeth-tooth-width-5mm-full-length-cut-outside-diameter-7-8mm-sku-26002400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 22 teeth tooth width 5mm (full-length cut) outside diameter 7.2mm SKU: 26002200](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-22-teeth-tooth-width-5mm-full-length-cut-outside-diameter-7-2mm-sku-26002200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 20 teeth tooth width 5mm (full-length cut) outside diameter 6.6mm SKU: 26002000](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-20-teeth-tooth-width-5mm-full-length-cut-outside-diameter-6-6mm-sku-26002000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 18 teeth tooth width 5mm (full-length cut) outside diameter 6mm SKU: 26001800](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-18-teeth-tooth-width-5mm-full-length-cut-outside-diameter-6mm-sku-26001800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 16 teeth tooth width 5mm (full-length cut) outside diameter 5.4mm SKU: 26001600](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-16-teeth-tooth-width-5mm-full-length-cut-outside-diameter-5-4mm-sku-26001600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 15 teeth tooth width 5mm (full-length cut) outside diameter 5.1mm SKU: 26001500](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-15-teeth-tooth-width-5mm-full-length-cut-outside-diameter-5-1mm-sku-26001500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 14 teeth tooth width 5mm (full-length cut) outside diameter 4.8mm SKU: 26001400](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-14-teeth-tooth-width-5mm-full-length-cut-outside-diameter-4-8mm-sku-26001400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 12 teeth tooth width 5mm (full-length cut) outside diameter 4.2mm SKU: 26001200](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-12-teeth-tooth-width-5mm-full-length-cut-outside-diameter-4-2mm-sku-26001200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Spur gear made of brass Ms58 module 0.3 10 teeth tooth width 5mm (full-length cut) outside diameter 3.6mm SKU: 26001000](https://maedler.in/product/spur-gear-made-of-brass-ms58-module-0-3-10-teeth-tooth-width-5mm-full-length-cut-outside-diameter-3-6mm-sku-26001000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. Up to 30 teeth without hub. From 40 teeth with hub. ** up to a No. of Teeth of 30, the teeth run over the entire width of the gear. - [Precision gear rack made of bright steel 900N/mm² module 5 2000mm long with bores SKU: 25560911](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-2000mm-long-with-bores-sku-25560911/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 2000mm long without bores SKU: 25560910](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-2000mm-long-without-bores-sku-25560910/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 1000mm long with bores SKU: 25560511](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-1000mm-long-with-bores-sku-25560511/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 1000mm long without bores SKU: 25560510](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-1000mm-long-without-bores-sku-25560510/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 500mm long with bores SKU: 25560311](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-500mm-long-with-bores-sku-25560311/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 5 500mm long without bores SKU: 25560310](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-5-500mm-long-without-bores-sku-25560310/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 2000mm long with bores SKU: 25460911](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-2000mm-long-with-bores-sku-25460911/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 2000mm long without bores SKU: 25460910](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-2000mm-long-without-bores-sku-25460910/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 1000mm long with bores SKU: 25460511](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-1000mm-long-with-bores-sku-25460511/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 1000mm long without bores SKU: 25460510](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-1000mm-long-without-bores-sku-25460510/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5, module 4 1000mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25460501](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-4-1000mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25460501/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5, module 4 1000mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25460500](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-4-1000mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25460500/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 506.67mm long with bores SKU: 25460311](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-506-67mm-long-with-bores-sku-25460311/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 4 506.67mm long without bores SKU: 25460310](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-4-506-67mm-long-without-bores-sku-25460310/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 4 506.67mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25460301](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-4-506-67mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25460301/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 2000mm long with bores SKU: 25360911](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-2000mm-long-with-bores-sku-25360911/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 2000mm long without bores SKU: 25360910](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-2000mm-long-without-bores-sku-25360910/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 1000mm long with bores SKU: 25360511](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-1000mm-long-with-bores-sku-25360511/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 1000mm long without bores SKU: 25360510](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-1000mm-long-without-bores-sku-25360510/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 3 1000mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25360501](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-3-1000mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25360501/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 3 1000mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25360500](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-3-1000mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25360500/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 500mm long with bores SKU: 25360311](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-500mm-long-with-bores-sku-25360311/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 3 500mm long without bores SKU: 25360310](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-3-500mm-long-without-bores-sku-25360310/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 3 500mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25360301](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-3-500mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25360301/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 3 500mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25360300](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-3-500mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25360300/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 2000mm long with bores SKU: 25160911](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-2000mm-long-with-bores-sku-25160911/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 2000mm long without bores SKU: 25160910](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-2000mm-long-without-bores-sku-25160910/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 1000mm long with bores SKU: 25160511](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-1000mm-long-with-bores-sku-25160511/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 1000mm long without bores SKU: 25160510](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-1000mm-long-without-bores-sku-25160510/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of 16MnCr5 module 2 1000mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25160501](https://maedler.in/product/precision-gear-rack-made-of-16mncr5-module-2-1000mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25160501/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of 16MnCr5 module 2 1000mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25160500](https://maedler.in/product/precision-gear-rack-made-of-16mncr5-module-2-1000mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25160500/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 500mm long with bores SKU: 25160311](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-500mm-long-with-bores-sku-25160311/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of bright steel 900N/mm² module 2 500mm long without bores SKU: 25160310](https://maedler.in/product/precision-gear-rack-made-of-bright-steel-900n-mm%c2%b2-module-2-500mm-long-without-bores-sku-25160310/): Material: High-quality, specially treated bright steel with approx. 900 N/mm² tensile strength. Helical tooth system, right hand 19° 31' 42''. Milled teeth, tooth quality 8e27. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 2 500mm long with bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25160301](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-2-500mm-long-with-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25160301/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision gear rack made of steel 16MnCr5 module 2 500mm long without bores; teeth hardened and all sides ground; teeth RH 19°31''42" SKU: 25160300](https://maedler.in/product/precision-gear-rack-made-of-steel-16mncr5-module-2-500mm-long-without-bores-teeth-hardened-and-all-sides-ground-teeth-rh-193142-sku-25160300/): Material: 16MnCr5, teeth induction hardened to about 60 HRC. After hardening ground all around. As only the teeth are hardened subsequent drilling and pinning is easily possible. Helical tooth system, right hand 19° 31' 42''. Teeth milled, hardened and ground. Tooth quality 6h25. For continuous linking. See also the matching left hand-toothed counterparts to simplify the mounting. Note: These right-handed racks are designed to be used in combination with our helical-toothed left-handed gears. 1) GTf /300 = total pitch error, i.e. the max. permissible deviation (per 300 mm) of the measured length of the rack compared to the theoretical length L300, with L300 = (m / cos ß) * p * z300). *Tangential force at tooth, calculated for z = 20. With a smaller number of teeth, the tangential force has to be reduced by 10%. - [Precision spur gear made of steel 16MnCr5 module 3 60 teeth bore 45mm hardened and ground outside diameter 186mm SKU: 24386045](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-60-teeth-bore-45mm-hardened-and-ground-outside-diameter-186mm-sku-24386045/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 60 teeth bore 35mm hardened and ground outside diameter 186mm SKU: 24386035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-60-teeth-bore-35mm-hardened-and-ground-outside-diameter-186mm-sku-24386035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 60 teeth bore 25mm hardened and ground outside diameter 186mm SKU: 24386000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-60-teeth-bore-25mm-hardened-and-ground-outside-diameter-186mm-sku-24386000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 50 teeth bore 45mm hardened and ground outside diameter 156mm SKU: 24385045](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-50-teeth-bore-45mm-hardened-and-ground-outside-diameter-156mm-sku-24385045/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 50 teeth bore 35mm hardened and ground outside diameter 156mm SKU: 24385035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-50-teeth-bore-35mm-hardened-and-ground-outside-diameter-156mm-sku-24385035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 50 teeth bore 20mm hardened and ground outside diameter 156mm SKU: 24385000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-50-teeth-bore-20mm-hardened-and-ground-outside-diameter-156mm-sku-24385000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 48 teeth bore 45mm hardened and ground outside diameter 150mm SKU: 24384845](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-48-teeth-bore-45mm-hardened-and-ground-outside-diameter-150mm-sku-24384845/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 48 teeth bore 35mm hardened and ground outside diameter 150mm SKU: 24384835](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-48-teeth-bore-35mm-hardened-and-ground-outside-diameter-150mm-sku-24384835/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 48 teeth bore 20mm hardened and ground outside diameter 150mm SKU: 24384800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-48-teeth-bore-20mm-hardened-and-ground-outside-diameter-150mm-sku-24384800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 40 teeth bore 40mm hardened and ground outside diameter 126mm SKU: 24384040](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-40-teeth-bore-40mm-hardened-and-ground-outside-diameter-126mm-sku-24384040/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 40 teeth bore 35mm hardened and ground outside diameter 126mm SKU: 24384035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-40-teeth-bore-35mm-hardened-and-ground-outside-diameter-126mm-sku-24384035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 40 teeth bore 20mm hardened and ground outside diameter 126mm SKU: 24384000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-40-teeth-bore-20mm-hardened-and-ground-outside-diameter-126mm-sku-24384000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 36 teeth bore 35mm hardened and ground outside diameter 114mm SKU: 24383635](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-36-teeth-bore-35mm-hardened-and-ground-outside-diameter-114mm-sku-24383635/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 36 teeth bore 30mm hardened and ground outside diameter 114mm SKU: 24383630](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-36-teeth-bore-30mm-hardened-and-ground-outside-diameter-114mm-sku-24383630/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 36 teeth bore 20mm hardened and ground outside diameter 114mm SKU: 24383600](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-36-teeth-bore-20mm-hardened-and-ground-outside-diameter-114mm-sku-24383600/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 30 teeth bore 35mm hardened and ground outside diameter 96mm SKU: 24383035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-30-teeth-bore-35mm-hardened-and-ground-outside-diameter-96mm-sku-24383035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 30 teeth bore 25mm hardened and ground outside diameter 96mm SKU: 24383025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-30-teeth-bore-25mm-hardened-and-ground-outside-diameter-96mm-sku-24383025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 30 teeth bore 20mm hardened and ground outside diameter 96mm SKU: 24383000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-30-teeth-bore-20mm-hardened-and-ground-outside-diameter-96mm-sku-24383000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 35mm hardened and ground outside diameter 81mm SKU: 24382535](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-35mm-hardened-and-ground-outside-diameter-81mm-sku-24382535/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 25mm hardened and ground outside diameter 81mm SKU: 24382500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-25mm-hardened-and-ground-outside-diameter-81mm-sku-24382500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 24 teeth bore 35mm hardened and ground outside diameter 78mm SKU: 24382435](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-24-teeth-bore-35mm-hardened-and-ground-outside-diameter-78mm-sku-24382435/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 24 teeth bore 25mm hardened and ground outside diameter 78mm SKU: 24382425](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-24-teeth-bore-25mm-hardened-and-ground-outside-diameter-78mm-sku-24382425/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 24 teeth bore 15mm hardened and ground outside diameter 78mm SKU: 24382400](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-24-teeth-bore-15mm-hardened-and-ground-outside-diameter-78mm-sku-24382400/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 25mm hardened and ground outside diameter 66mm SKU: 24382025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-25mm-hardened-and-ground-outside-diameter-66mm-sku-24382025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 15mm hardened and ground outside diameter 66mm SKU: 24382000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-15mm-hardened-and-ground-outside-diameter-66mm-sku-24382000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 18 teeth bore 20mm hardened and ground outside diameter 60mm SKU: 24381820](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-18-teeth-bore-20mm-hardened-and-ground-outside-diameter-60mm-sku-24381820/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 18 teeth bore 15mm hardened and ground outside diameter 60mm SKU: 24381800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-18-teeth-bore-15mm-hardened-and-ground-outside-diameter-60mm-sku-24381800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 15 teeth bore 20mm hardened and ground outside diameter 51mm SKU: 24381520](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-15-teeth-bore-20mm-hardened-and-ground-outside-diameter-51mm-sku-24381520/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 15 teeth bore 12mm hardened and ground outside diameter 51mm SKU: 24381500](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-15-teeth-bore-12mm-hardened-and-ground-outside-diameter-51mm-sku-24381500/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 12 teeth bore 15mm hardened and ground outside diameter 42mm SKU: 24381215](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-12-teeth-bore-15mm-hardened-and-ground-outside-diameter-42mm-sku-24381215/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 3 12 teeth bore 12mm hardened and ground outside diameter 42mm SKU: 24381200](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-12-teeth-bore-12mm-hardened-and-ground-outside-diameter-42mm-sku-24381200/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 60 teeth bore 35mm hardened and ground outside diameter 124mm SKU: 24186035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-60-teeth-bore-35mm-hardened-and-ground-outside-diameter-124mm-sku-24186035/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 60 teeth bore 30mm hardened and ground outside diameter 124mm SKU: 24186030](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-60-teeth-bore-30mm-hardened-and-ground-outside-diameter-124mm-sku-24186030/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 60 teeth bore 20mm hardened and ground outside diameter 124mm SKU: 24186000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-60-teeth-bore-20mm-hardened-and-ground-outside-diameter-124mm-sku-24186000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 50 teeth bore 30mm hardened and ground outside diameter 104mm SKU: 24185030](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-50-teeth-bore-30mm-hardened-and-ground-outside-diameter-104mm-sku-24185030/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 50 teeth bore 25mm hardened and ground outside diameter 104mm SKU: 24185025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-50-teeth-bore-25mm-hardened-and-ground-outside-diameter-104mm-sku-24185025/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 50 teeth bore 20mm hardened and ground outside diameter 104mm SKU: 24185000](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-50-teeth-bore-20mm-hardened-and-ground-outside-diameter-104mm-sku-24185000/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 48 teeth bore 25mm hardened and ground outside diameter 100mm SKU: 24184825](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-48-teeth-bore-25mm-hardened-and-ground-outside-diameter-100mm-sku-24184825/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 48 teeth bore 20mm hardened and ground outside diameter 100mm SKU: 24184820](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-48-teeth-bore-20mm-hardened-and-ground-outside-diameter-100mm-sku-24184820/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Precision spur gear made of steel 16MnCr5 module 2 48 teeth bore 15mm hardened and ground outside diameter 100mm SKU: 24184800](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-48-teeth-bore-15mm-hardened-and-ground-outside-diameter-100mm-sku-24184800/): Material: Steel 16MnCr5, case hardened HRC 58 ± 2. Teeth, bores and faces ground. Tooth quality 7 e25. Pressure angle 20°. Feather Keyways in accordance with DIN 6885/1, tolerance P9. Position of keyway to tooth is not defined. - [Round flange trapezoidal nut Tr.50 x 8 single-start right material cast iron SKU: 64405000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-50-x-8-single-start-right-material-cast-iron-sku-64405000/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.48 x 8 single-start right material cast iron SKU: 64404800](https://maedler.in/product/round-flange-trapezoidal-nut-tr-48-x-8-single-start-right-material-cast-iron-sku-64404800/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.44 x 7 single-start right material cast iron SKU: 64404400](https://maedler.in/product/round-flange-trapezoidal-nut-tr-44-x-7-single-start-right-material-cast-iron-sku-64404400/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.40 x 7 single-start right material cast iron SKU: 64404000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-40-x-7-single-start-right-material-cast-iron-sku-64404000/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.36 x 6 single-start right material cast iron SKU: 64403600](https://maedler.in/product/round-flange-trapezoidal-nut-tr-36-x-6-single-start-right-material-cast-iron-sku-64403600/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.32 x 6 single-start right material cast iron SKU: 64403200](https://maedler.in/product/round-flange-trapezoidal-nut-tr-32-x-6-single-start-right-material-cast-iron-sku-64403200/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.30 x 6 single-start right material cast iron SKU: 64403000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-30-x-6-single-start-right-material-cast-iron-sku-64403000/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.28 x 5 single-start right material cast iron SKU: 64402800](https://maedler.in/product/round-flange-trapezoidal-nut-tr-28-x-5-single-start-right-material-cast-iron-sku-64402800/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.24 x 5 single-start right material cast iron SKU: 64402400](https://maedler.in/product/round-flange-trapezoidal-nut-tr-24-x-5-single-start-right-material-cast-iron-sku-64402400/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.20 x 4 single-start right material cast iron SKU: 64402000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-20-x-4-single-start-right-material-cast-iron-sku-64402000/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.16 x 4 single-start right material cast iron SKU: 64401600](https://maedler.in/product/round-flange-trapezoidal-nut-tr-16-x-4-single-start-right-material-cast-iron-sku-64401600/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.14 x 4 single-start right material cast iron SKU: 64401400](https://maedler.in/product/round-flange-trapezoidal-nut-tr-14-x-4-single-start-right-material-cast-iron-sku-64401400/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.12 x 3 single-start right material cast iron SKU: 64401200](https://maedler.in/product/round-flange-trapezoidal-nut-tr-12-x-3-single-start-right-material-cast-iron-sku-64401200/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.10 x 3 single-start right material cast iron SKU: 64401000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-10-x-3-single-start-right-material-cast-iron-sku-64401000/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.24 x 5 single-start left length 36mm wrench size 36mm SKU: 64399624](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-24-x-5-single-start-left-length-36mm-wrench-size-36mm-sku-64399624/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.20 x 4 single-start left length 30mm wrench size 30mm SKU: 64399620](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-20-x-4-single-start-left-length-30mm-wrench-size-30mm-sku-64399620/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.16 x 4 single-start left length 24mm wrench size 27mm SKU: 64399616](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-16-x-4-single-start-left-length-24mm-wrench-size-27mm-sku-64399616/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.12 x 3 single-start left length 18mm wrench size 19mm SKU: 64399612](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-12-x-3-single-start-left-length-18mm-wrench-size-19mm-sku-64399612/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.40 x 7 single-start left length 60mm outer diameter 80mm SKU: 64399540](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-40-x-7-single-start-left-length-60mm-outer-diameter-80mm-sku-64399540/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.30 x 6 single-start left length 45mm outer diameter 60mm SKU: 64399530](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-30-x-6-single-start-left-length-45mm-outer-diameter-60mm-sku-64399530/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.24 x 5 single-start left length 36mm outer diameter 50mm SKU: 64399524](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-24-x-5-single-start-left-length-36mm-outer-diameter-50mm-sku-64399524/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.20 x 4 single-start left length 30mm outer diameter 45mm SKU: 64399520](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-20-x-4-single-start-left-length-30mm-outer-diameter-45mm-sku-64399520/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.16 x 4 single-start left length 24mm outer diameter 36mm SKU: 64399516](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-16-x-4-single-start-left-length-24mm-outer-diameter-36mm-sku-64399516/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.12 x 3 single-start left length 18mm outer diameter 26mm SKU: 64399512](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-12-x-3-single-start-left-length-18mm-outer-diameter-26mm-sku-64399512/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.40 x 7 single-start right length 60mm wrench size 64mm SKU: 64399140](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-40-x-7-single-start-right-length-60mm-wrench-size-64mm-sku-64399140/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.36 x 6 single-start right length 54mm wrench size 55mm SKU: 64399136](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-36-x-6-single-start-right-length-54mm-wrench-size-55mm-sku-64399136/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.30 x 6 single-start right length 45mm wrench size 46mm SKU: 64399130](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-30-x-6-single-start-right-length-45mm-wrench-size-46mm-sku-64399130/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.24 x 5 single-start right length 42mm wrench size 46mm SKU: 64399128](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-24-x-5-single-start-right-length-42mm-wrench-size-46mm-sku-64399128/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.24 x 5 single-start right length 36mm wrench size 36mm SKU: 64399124](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-24-x-5-single-start-right-length-36mm-wrench-size-36mm-sku-64399124/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.20 x 4 single-start right length 30mm wrench size 30mm SKU: 64399120](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-20-x-4-single-start-right-length-30mm-wrench-size-30mm-sku-64399120/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.16 x 4 single-start right length 24mm wrench size 27mm SKU: 64399116](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-16-x-4-single-start-right-length-24mm-wrench-size-27mm-sku-64399116/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut stainless 1.4305 Tr.12 x 3 single-start right length 18mm wrench size 19mm SKU: 64399112](https://maedler.in/product/hexagonal-trapezoidal-nut-stainless-1-4305-tr-12-x-3-single-start-right-length-18mm-wrench-size-19mm-sku-64399112/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.40 x 7 single-start right length 60mm outer diameter 80mm SKU: 64399040](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-40-x-7-single-start-right-length-60mm-outer-diameter-80mm-sku-64399040/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.36 x 6 single-start right length 54mm outer diameter 75mm SKU: 64399036](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-36-x-6-single-start-right-length-54mm-outer-diameter-75mm-sku-64399036/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.30 x 6 single-start right length 45mm outer diameter 60mm SKU: 64399030](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-30-x-6-single-start-right-length-45mm-outer-diameter-60mm-sku-64399030/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.24 x 5 single-start right length 42mm outer diameter 60mm SKU: 64399028](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-24-x-5-single-start-right-length-42mm-outer-diameter-60mm-sku-64399028/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.24 x 5 single-start right length 36mm outer diameter 50mm SKU: 64399024](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-24-x-5-single-start-right-length-36mm-outer-diameter-50mm-sku-64399024/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.20 x 4 single-start right length 30mm outer diameter 45mm SKU: 64399020](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-20-x-4-single-start-right-length-30mm-outer-diameter-45mm-sku-64399020/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.16 x 4 single-start right length 24mm outer diameter 36mm SKU: 64399016](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-16-x-4-single-start-right-length-24mm-outer-diameter-36mm-sku-64399016/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut stainless 1.4305 Tr.12 x 3 single-start right length 18mm outer diameter 26mm SKU: 64399012](https://maedler.in/product/round-trapezoidal-nut-stainless-1-4305-tr-12-x-3-single-start-right-length-18mm-outer-diameter-26mm-sku-64399012/): Material: 1.4305 (AISI 303). Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut nylatron Tr.60 x 9 single-start left length 120mm outer diameter 100mm SKU: 64396000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-60-x-9-single-start-left-length-120mm-outer-diameter-100mm-sku-64396000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.50 x 8 single-start left length 100mm outer diameter 90mm SKU: 64395000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-50-x-8-single-start-left-length-100mm-outer-diameter-90mm-sku-64395000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.40 x 7 single-start left length 80mm outer diameter 80mm SKU: 64394000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-40-x-7-single-start-left-length-80mm-outer-diameter-80mm-sku-64394000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.36 x 6 single-start left length 72mm outer diameter 75mm SKU: 64393600](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-36-x-6-single-start-left-length-72mm-outer-diameter-75mm-sku-64393600/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.32 x 6 single-start left length 64mm outer diameter 60mm SKU: 64393200](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-32-x-6-single-start-left-length-64mm-outer-diameter-60mm-sku-64393200/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.30 x 6 single-start left length 60mm outer diameter 60mm SKU: 64393000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-30-x-6-single-start-left-length-60mm-outer-diameter-60mm-sku-64393000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.28 x 5 single-start left length 56mm outer diameter 60mm SKU: 64392800](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-28-x-5-single-start-left-length-56mm-outer-diameter-60mm-sku-64392800/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.24 x 5 single-start left length 48mm outer diameter 50mm SKU: 64392400](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-24-x-5-single-start-left-length-48mm-outer-diameter-50mm-sku-64392400/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.20 x 4 single-start left length 40mm outer diameter 45mm SKU: 64392000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-20-x-4-single-start-left-length-40mm-outer-diameter-45mm-sku-64392000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.18 x 4 single-start left length 36mm outer diameter 40mm SKU: 64391800](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-18-x-4-single-start-left-length-36mm-outer-diameter-40mm-sku-64391800/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.16 x 4 single-start left length 32mm outer diameter 36mm SKU: 64391600](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-16-x-4-single-start-left-length-32mm-outer-diameter-36mm-sku-64391600/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.12 x 3 single-start left length 24mm outer diameter 26mm SKU: 64391200](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-12-x-3-single-start-left-length-24mm-outer-diameter-26mm-sku-64391200/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.70 x 10 single-start left length 120mm outer diameter 110mm SKU: 64387000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-70-x-10-single-start-left-length-120mm-outer-diameter-110mm-sku-64387000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.60 x 9 single-start left length 120mm outer diameter 100mm SKU: 64386000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-60-x-9-single-start-left-length-120mm-outer-diameter-100mm-sku-64386000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.52 x 8 single-start left length 104mm outer diameter 90mm SKU: 64385200](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-52-x-8-single-start-left-length-104mm-outer-diameter-90mm-sku-64385200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.50 x 8 single-start left length 100mm outer diameter 90mm SKU: 64385000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-50-x-8-single-start-left-length-100mm-outer-diameter-90mm-sku-64385000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.48 x 8 single-start left length 96mm outer diameter 90mm SKU: 64384800](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-48-x-8-single-start-left-length-96mm-outer-diameter-90mm-sku-64384800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.44 x 7 single-start left length 88mm outer diameter 80mm SKU: 64384400](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-44-x-7-single-start-left-length-88mm-outer-diameter-80mm-sku-64384400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.40 x 7 single-start left length 80mm outer diameter 80mm SKU: 64384000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-40-x-7-single-start-left-length-80mm-outer-diameter-80mm-sku-64384000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.36 x 6 single-start left length 72mm outer diameter 75mm SKU: 64383600](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-36-x-6-single-start-left-length-72mm-outer-diameter-75mm-sku-64383600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.32 x 6 single-start left length 64mm outer diameter 60mm SKU: 64383200](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-32-x-6-single-start-left-length-64mm-outer-diameter-60mm-sku-64383200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.30 x 6 single-start left length 60mm outer diameter 60mm SKU: 64383000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-30-x-6-single-start-left-length-60mm-outer-diameter-60mm-sku-64383000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.28 x 5 single-start left length 56mm outer diameter 60mm SKU: 64382800](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-28-x-5-single-start-left-length-56mm-outer-diameter-60mm-sku-64382800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.24 x 5 single-start left length 48mm outer diameter 50mm SKU: 64382400](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-24-x-5-single-start-left-length-48mm-outer-diameter-50mm-sku-64382400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.20 x 4 single-start left length 40mm outer diameter 45mm SKU: 64382000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-20-x-4-single-start-left-length-40mm-outer-diameter-45mm-sku-64382000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.18 x 4 single-start left length 36mm outer diameter 40mm SKU: 64381800](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-18-x-4-single-start-left-length-36mm-outer-diameter-40mm-sku-64381800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.16 x 4 single-start left length 32mm outer diameter 36mm SKU: 64381600](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-16-x-4-single-start-left-length-32mm-outer-diameter-36mm-sku-64381600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.14 x 4 single-start left length 28mm outer diameter 30mm SKU: 64381400](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-14-x-4-single-start-left-length-28mm-outer-diameter-30mm-sku-64381400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.12 x 3 single-start left length 24mm outer diameter 26mm SKU: 64381200](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-12-x-3-single-start-left-length-24mm-outer-diameter-26mm-sku-64381200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass Rg7 Tr.10 x 3 single-start left length 20mm outer diameter 22mm SKU: 64381000](https://maedler.in/product/round-trapezoidal-nut-red-brass-rg7-tr-10-x-3-single-start-left-length-20mm-outer-diameter-22mm-sku-64381000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut steel C35Pb Tr.60 x 9 single-start left length 120mm outer diameter 100mm SKU: 64376000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-60-x-9-single-start-left-length-120mm-outer-diameter-100mm-sku-64376000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.52 x 8 single-start left length 104mm outer diameter 90mm SKU: 64375200](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-52-x-8-single-start-left-length-104mm-outer-diameter-90mm-sku-64375200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.50 x 8 single-start left length 100mm outer diameter 90mm SKU: 64375000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-50-x-8-single-start-left-length-100mm-outer-diameter-90mm-sku-64375000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.48 x 8 single-start left length 96mm outer diameter 90mm SKU: 64374800](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-48-x-8-single-start-left-length-96mm-outer-diameter-90mm-sku-64374800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.44 x 7 single-start left length 88mm outer diameter 80mm SKU: 64374400](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-44-x-7-single-start-left-length-88mm-outer-diameter-80mm-sku-64374400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.40 x 7 single-start left length 80mm outer diameter 80mm SKU: 64374000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-40-x-7-single-start-left-length-80mm-outer-diameter-80mm-sku-64374000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.36 x 6 single-start left length 72mm outer diameter 75mm SKU: 64373600](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-36-x-6-single-start-left-length-72mm-outer-diameter-75mm-sku-64373600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.32 x 6 single-start left length 64mm outer diameter 60mm SKU: 64373200](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-32-x-6-single-start-left-length-64mm-outer-diameter-60mm-sku-64373200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.30 x 6 single-start left length 60mm outer diameter 60mm SKU: 64373000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-30-x-6-single-start-left-length-60mm-outer-diameter-60mm-sku-64373000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.28 x 5 single-start left length 56mm outer diameter 60mm SKU: 64372800](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-28-x-5-single-start-left-length-56mm-outer-diameter-60mm-sku-64372800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.24 x 5 single-start left length 48mm outer diameter 50mm SKU: 64372400](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-24-x-5-single-start-left-length-48mm-outer-diameter-50mm-sku-64372400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.20 x 4 single-start left length 40mm outer diameter 45mm SKU: 64372000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-20-x-4-single-start-left-length-40mm-outer-diameter-45mm-sku-64372000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.18 x 4 single-start left length 36mm outer diameter 40mm SKU: 64371800](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-18-x-4-single-start-left-length-36mm-outer-diameter-40mm-sku-64371800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.16 x 4 single-start left length 32mm outer diameter 36mm SKU: 64371600](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-16-x-4-single-start-left-length-32mm-outer-diameter-36mm-sku-64371600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.14 x 4 single-start left length 28mm outer diameter 30mm SKU: 64371400](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-14-x-4-single-start-left-length-28mm-outer-diameter-30mm-sku-64371400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.12 x 3 single-start left length 24mm outer diameter 26mm SKU: 64371200](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-12-x-3-single-start-left-length-24mm-outer-diameter-26mm-sku-64371200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel C35Pb Tr.10 x 3 single-start left length 20mm outer diameter 22mm SKU: 64371000](https://maedler.in/product/round-trapezoidal-nut-steel-c35pb-tr-10-x-3-single-start-left-length-20mm-outer-diameter-22mm-sku-64371000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 2 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.70 x 10 single-start left length 105mm wrench size 90mm SKU: 64367000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-70-x-10-single-start-left-length-105mm-wrench-size-90mm-sku-64367000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.60 x 9 single-start left length 90mm wrench size 90mm SKU: 64366000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-60-x-9-single-start-left-length-90mm-wrench-size-90mm-sku-64366000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.52 x 8 single-start left length 78mm wrench size 75mm SKU: 64365200](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-52-x-8-single-start-left-length-78mm-wrench-size-75mm-sku-64365200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.50 x 8 single-start left length 75mm wrench size 75mm SKU: 64365000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-50-x-8-single-start-left-length-75mm-wrench-size-75mm-sku-64365000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.48 x 8 single-start left length 72mm wrench size 75mm SKU: 64364800](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-48-x-8-single-start-left-length-72mm-wrench-size-75mm-sku-64364800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.44 x 7 single-start left length 66mm wrench size 65mm SKU: 64364400](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-44-x-7-single-start-left-length-66mm-wrench-size-65mm-sku-64364400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.40 x 7 single-start left length 60mm wrench size 65mm SKU: 64364000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-40-x-7-single-start-left-length-60mm-wrench-size-65mm-sku-64364000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.36 x 6 single-start left length 54mm wrench size 55mm SKU: 64363600](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-36-x-6-single-start-left-length-54mm-wrench-size-55mm-sku-64363600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.32 x 6 single-start left length 48mm wrench size 46mm SKU: 64363200](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-32-x-6-single-start-left-length-48mm-wrench-size-46mm-sku-64363200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.30 x 6 single-start left length 45mm wrench size 46mm SKU: 64363000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-30-x-6-single-start-left-length-45mm-wrench-size-46mm-sku-64363000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.28 x 5 single-start left length 42mm wrench size 46mm SKU: 64362800](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-28-x-5-single-start-left-length-42mm-wrench-size-46mm-sku-64362800/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.24 x 5 single-start left length 36mm wrench size 36mm SKU: 64362400](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-24-x-5-single-start-left-length-36mm-wrench-size-36mm-sku-64362400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Hexagonal trapezoidal nut steel C35Pb Tr.20 x 4 single-start left length 30mm wrench size 30mm SKU: 64362000](https://maedler.in/product/hexagonal-trapezoidal-nut-steel-c35pb-tr-20-x-4-single-start-left-length-30mm-wrench-size-30mm-sku-64362000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Spur gear made of brass Ms58 with hub module 1 28 teeth tooth width 6.5mm outside diameter 30mm SKU: 26302800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-28-teeth-tooth-width-6-5mm-outside-diameter-30mm-sku-26302800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 27 teeth tooth width 6.5mm outside diameter 29mm SKU: 26302700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-27-teeth-tooth-width-6-5mm-outside-diameter-29mm-sku-26302700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 26 teeth tooth width 6.5mm outside diameter 28mm SKU: 26302600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-26-teeth-tooth-width-6-5mm-outside-diameter-28mm-sku-26302600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 25 teeth tooth width 6.5mm outside diameter 27mm SKU: 26302500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-25-teeth-tooth-width-6-5mm-outside-diameter-27mm-sku-26302500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 24 teeth tooth width 6.5mm outside diameter 26mm SKU: 26302400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-24-teeth-tooth-width-6-5mm-outside-diameter-26mm-sku-26302400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 23 teeth tooth width 6.5mm outside diameter 25mm SKU: 26302300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-23-teeth-tooth-width-6-5mm-outside-diameter-25mm-sku-26302300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 22 teeth tooth width 6.5mm outside diameter 24mm SKU: 26302200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-22-teeth-tooth-width-6-5mm-outside-diameter-24mm-sku-26302200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 21 teeth tooth width 6.5mm outside diameter 23mm SKU: 26302100](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-21-teeth-tooth-width-6-5mm-outside-diameter-23mm-sku-26302100/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 20 teeth tooth width 6.5mm outside diameter 22mm SKU: 26302000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-20-teeth-tooth-width-6-5mm-outside-diameter-22mm-sku-26302000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 19 teeth tooth width 6.5mm outside diameter 21mm SKU: 26301900](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-19-teeth-tooth-width-6-5mm-outside-diameter-21mm-sku-26301900/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 18 teeth tooth width 6.5mm outside diameter 20mm SKU: 26301800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-18-teeth-tooth-width-6-5mm-outside-diameter-20mm-sku-26301800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 17 teeth tooth width 6.5mm outside diameter 19mm SKU: 26301700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-17-teeth-tooth-width-6-5mm-outside-diameter-19mm-sku-26301700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 16 teeth tooth width 6.5mm outside diameter 18mm SKU: 26301600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-16-teeth-tooth-width-6-5mm-outside-diameter-18mm-sku-26301600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 15 teeth tooth width 6.5mm outside diameter 17mm SKU: 26301500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-15-teeth-tooth-width-6-5mm-outside-diameter-17mm-sku-26301500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 14 teeth tooth width 6.5mm outside diameter 16mm SKU: 26301400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-14-teeth-tooth-width-6-5mm-outside-diameter-16mm-sku-26301400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 13 teeth tooth width 6.5mm outside diameter 15mm SKU: 26301300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-13-teeth-tooth-width-6-5mm-outside-diameter-15mm-sku-26301300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 12 teeth tooth width 6.5mm outside diameter 14mm SKU: 26301200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-12-teeth-tooth-width-6-5mm-outside-diameter-14mm-sku-26301200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 10 teeth tooth width 6.5mm outside diameter 12mm SKU: 26301000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-10-teeth-tooth-width-6-5mm-outside-diameter-12mm-sku-26301000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 120 teeth tooth width 4mm outside diameter 85.4mm SKU: 26212000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-120-teeth-tooth-width-4mm-outside-diameter-85-4mm-sku-26212000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 114 teeth tooth width 4mm outside diameter 81.2mm SKU: 26211400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-114-teeth-tooth-width-4mm-outside-diameter-81-2mm-sku-26211400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 100 teeth tooth width 4mm outside diameter 71.4mm SKU: 26210000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-100-teeth-tooth-width-4mm-outside-diameter-71-4mm-sku-26210000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 96 teeth tooth width 4mm outside diameter 68.6mm SKU: 26209600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-96-teeth-tooth-width-4mm-outside-diameter-68-6mm-sku-26209600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 90 teeth tooth width 4mm outside diameter 64.4mm SKU: 26209000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-90-teeth-tooth-width-4mm-outside-diameter-64-4mm-sku-26209000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 85 teeth tooth width 4mm outside diameter 60.9mm SKU: 26208500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-85-teeth-tooth-width-4mm-outside-diameter-60-9mm-sku-26208500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 80 teeth tooth width 4mm outside diameter 57.4mm SKU: 26208000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-80-teeth-tooth-width-4mm-outside-diameter-57-4mm-sku-26208000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 75 teeth tooth width 4mm outside diameter 53.9mm SKU: 26207500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-75-teeth-tooth-width-4mm-outside-diameter-53-9mm-sku-26207500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 72 teeth tooth width 4mm outside diameter 51.8mm SKU: 26207200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-72-teeth-tooth-width-4mm-outside-diameter-51-8mm-sku-26207200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 70 teeth tooth width 4mm outside diameter 50.4mm SKU: 26207000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-70-teeth-tooth-width-4mm-outside-diameter-50-4mm-sku-26207000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 65 teeth tooth width 4mm outside diameter 46.9mm SKU: 26206500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-65-teeth-tooth-width-4mm-outside-diameter-46-9mm-sku-26206500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 64 teeth tooth width 4mm outside diameter 46.2mm SKU: 26206400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-64-teeth-tooth-width-4mm-outside-diameter-46-2mm-sku-26206400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 60 teeth tooth width 4mm outside diameter 43.4mm SKU: 26206000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-60-teeth-tooth-width-4mm-outside-diameter-43-4mm-sku-26206000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 56 teeth tooth width 4mm outside diameter 40.6mm SKU: 26205600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-56-teeth-tooth-width-4mm-outside-diameter-40-6mm-sku-26205600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 55 teeth tooth width 4mm outside diameter 39.9mm SKU: 26205500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-55-teeth-tooth-width-4mm-outside-diameter-39-9mm-sku-26205500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 54 teeth tooth width 4mm outside diameter 39.2mm SKU: 26205400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-54-teeth-tooth-width-4mm-outside-diameter-39-2mm-sku-26205400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 52 teeth tooth width 4mm outside diameter 37.8mm SKU: 26205200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-52-teeth-tooth-width-4mm-outside-diameter-37-8mm-sku-26205200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 50 teeth tooth width 4mm outside diameter 36.4mm SKU: 26205000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-50-teeth-tooth-width-4mm-outside-diameter-36-4mm-sku-26205000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 48 teeth tooth width 4mm outside diameter 35mm SKU: 26204800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-48-teeth-tooth-width-4mm-outside-diameter-35mm-sku-26204800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 45 teeth tooth width 4mm outside diameter 32.9mm SKU: 26204500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-45-teeth-tooth-width-4mm-outside-diameter-32-9mm-sku-26204500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 42 teeth tooth width 4mm outside diameter 30.8mm SKU: 26204200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-42-teeth-tooth-width-4mm-outside-diameter-30-8mm-sku-26204200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 40 teeth tooth width 4mm outside diameter 29.4mm SKU: 26204000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-40-teeth-tooth-width-4mm-outside-diameter-29-4mm-sku-26204000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 38 teeth tooth width 4mm outside diameter 28mm SKU: 26203800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-38-teeth-tooth-width-4mm-outside-diameter-28mm-sku-26203800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 36 teeth tooth width 4mm outside diameter 26.6mm SKU: 26203600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-36-teeth-tooth-width-4mm-outside-diameter-26-6mm-sku-26203600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 35 teeth tooth width 4mm outside diameter 25.9mm SKU: 26203500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-35-teeth-tooth-width-4mm-outside-diameter-25-9mm-sku-26203500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 32 teeth tooth width 4mm outside diameter 23.8mm SKU: 26203200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-32-teeth-tooth-width-4mm-outside-diameter-23-8mm-sku-26203200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 30 teeth tooth width 4mm outside diameter 22.4mm SKU: 26203000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-30-teeth-tooth-width-4mm-outside-diameter-22-4mm-sku-26203000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 28 teeth tooth width 4mm outside diameter 21mm SKU: 26202800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-28-teeth-tooth-width-4mm-outside-diameter-21mm-sku-26202800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 27 teeth tooth width 4mm outside diameter 20.3mm SKU: 26202700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-27-teeth-tooth-width-4mm-outside-diameter-20-3mm-sku-26202700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 26 teeth tooth width 4mm outside diameter 19.6mm SKU: 26202600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-26-teeth-tooth-width-4mm-outside-diameter-19-6mm-sku-26202600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 25 teeth tooth width 4mm outside diameter 18.9mm SKU: 26202500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-25-teeth-tooth-width-4mm-outside-diameter-18-9mm-sku-26202500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 24 teeth tooth width 4mm outside diameter 18.2mm SKU: 26202400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-24-teeth-tooth-width-4mm-outside-diameter-18-2mm-sku-26202400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 23 teeth tooth width 4mm outside diameter 17.5mm SKU: 26202300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-23-teeth-tooth-width-4mm-outside-diameter-17-5mm-sku-26202300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 22 teeth tooth width 4mm outside diameter 16.8mm SKU: 26202200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-22-teeth-tooth-width-4mm-outside-diameter-16-8mm-sku-26202200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 21 teeth tooth width 4mm outside diameter 16.1mm SKU: 26202100](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-21-teeth-tooth-width-4mm-outside-diameter-16-1mm-sku-26202100/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 20 teeth tooth width 4mm outside diameter 15.4mm SKU: 26202000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-20-teeth-tooth-width-4mm-outside-diameter-15-4mm-sku-26202000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 19 teeth tooth width 4mm outside diameter 14.7mm SKU: 26201900](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-19-teeth-tooth-width-4mm-outside-diameter-14-7mm-sku-26201900/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 18 teeth tooth width 4mm outside diameter 14mm SKU: 26201800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-18-teeth-tooth-width-4mm-outside-diameter-14mm-sku-26201800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 17 teeth tooth width 4mm outside diameter 13.3mm SKU: 26201700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-17-teeth-tooth-width-4mm-outside-diameter-13-3mm-sku-26201700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 16 teeth tooth width 4mm outside diameter 12.6mm SKU: 26201600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-16-teeth-tooth-width-4mm-outside-diameter-12-6mm-sku-26201600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 15 teeth tooth width 4mm outside diameter 11.9mm SKU: 26201500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-15-teeth-tooth-width-4mm-outside-diameter-11-9mm-sku-26201500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 14 teeth tooth width 4mm outside diameter 11.2mm SKU: 26201400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-14-teeth-tooth-width-4mm-outside-diameter-11-2mm-sku-26201400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 13 teeth tooth width 4mm outside diameter 10.5mm SKU: 26201300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-13-teeth-tooth-width-4mm-outside-diameter-10-5mm-sku-26201300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 12 teeth tooth width 4mm outside diameter 9.8mm SKU: 26201200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-12-teeth-tooth-width-4mm-outside-diameter-9-8mm-sku-26201200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.7 10 teeth tooth width 4mm outside diameter 8.4mm SKU: 26201000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-7-10-teeth-tooth-width-4mm-outside-diameter-8-4mm-sku-26201000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 120 teeth tooth width 2mm outside diameter 61mm SKU: 26112000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-120-teeth-tooth-width-2mm-outside-diameter-61mm-sku-26112000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 114 teeth tooth width 2mm outside diameter 58mm SKU: 26111400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-114-teeth-tooth-width-2mm-outside-diameter-58mm-sku-26111400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 100 teeth tooth width 2mm outside diameter 51mm SKU: 26110000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-100-teeth-tooth-width-2mm-outside-diameter-51mm-sku-26110000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 96 teeth tooth width 2mm outside diameter 49mm SKU: 26109600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-96-teeth-tooth-width-2mm-outside-diameter-49mm-sku-26109600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 90 teeth tooth width 2mm outside diameter 46mm SKU: 26109000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-90-teeth-tooth-width-2mm-outside-diameter-46mm-sku-26109000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 85 teeth tooth width 2mm outside diameter 43.5mm SKU: 26108500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-85-teeth-tooth-width-2mm-outside-diameter-43-5mm-sku-26108500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 80 teeth tooth width 2mm outside diameter 41mm SKU: 26108000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-80-teeth-tooth-width-2mm-outside-diameter-41mm-sku-26108000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 75 teeth tooth width 2mm outside diameter 38.5mm SKU: 26107500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-75-teeth-tooth-width-2mm-outside-diameter-38-5mm-sku-26107500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 72 teeth tooth width 2mm outside diameter 37mm SKU: 26107200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-72-teeth-tooth-width-2mm-outside-diameter-37mm-sku-26107200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 70 teeth tooth width 2mm outside diameter 36mm SKU: 26107000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-70-teeth-tooth-width-2mm-outside-diameter-36mm-sku-26107000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 65 teeth tooth width 2mm outside diameter 33.5mm SKU: 26106500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-65-teeth-tooth-width-2mm-outside-diameter-33-5mm-sku-26106500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 64 teeth tooth width 2mm outside diameter 33mm SKU: 26106400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-64-teeth-tooth-width-2mm-outside-diameter-33mm-sku-26106400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 60 teeth tooth width 2mm outside diameter 31mm SKU: 26106000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-60-teeth-tooth-width-2mm-outside-diameter-31mm-sku-26106000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 56 teeth tooth width 2mm outside diameter 29mm SKU: 26105600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-56-teeth-tooth-width-2mm-outside-diameter-29mm-sku-26105600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 55 teeth tooth width 2mm outside diameter 28.5mm SKU: 26105500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-55-teeth-tooth-width-2mm-outside-diameter-28-5mm-sku-26105500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 54 teeth tooth width 2mm outside diameter 28mm SKU: 26105400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-54-teeth-tooth-width-2mm-outside-diameter-28mm-sku-26105400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 52 teeth tooth width 2mm outside diameter 27mm SKU: 26105200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-52-teeth-tooth-width-2mm-outside-diameter-27mm-sku-26105200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 50 teeth tooth width 2mm outside diameter 26mm SKU: 26105000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-50-teeth-tooth-width-2mm-outside-diameter-26mm-sku-26105000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 48 teeth tooth width 2mm outside diameter 25mm SKU: 26104800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-48-teeth-tooth-width-2mm-outside-diameter-25mm-sku-26104800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 45 teeth tooth width 2mm outside diameter 23.5mm SKU: 26104500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-45-teeth-tooth-width-2mm-outside-diameter-23-5mm-sku-26104500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 42 teeth tooth width 2mm outside diameter 22mm SKU: 26104200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-42-teeth-tooth-width-2mm-outside-diameter-22mm-sku-26104200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 40 teeth tooth width 2mm outside diameter 21mm SKU: 26104000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-40-teeth-tooth-width-2mm-outside-diameter-21mm-sku-26104000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 38 teeth tooth width 2mm outside diameter 20mm SKU: 26103800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-38-teeth-tooth-width-2mm-outside-diameter-20mm-sku-26103800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 36 teeth tooth width 2mm outside diameter 19mm SKU: 26103600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-36-teeth-tooth-width-2mm-outside-diameter-19mm-sku-26103600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 35 teeth tooth width 2mm outside diameter 18.5mm SKU: 26103500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-35-teeth-tooth-width-2mm-outside-diameter-18-5mm-sku-26103500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 32 teeth tooth width 2mm outside diameter 17mm SKU: 26103200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-32-teeth-tooth-width-2mm-outside-diameter-17mm-sku-26103200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 30 teeth tooth width 2mm outside diameter 16mm SKU: 26103000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-30-teeth-tooth-width-2mm-outside-diameter-16mm-sku-26103000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 28 teeth tooth width 2mm outside diameter 15mm SKU: 26102800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-28-teeth-tooth-width-2mm-outside-diameter-15mm-sku-26102800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 27 teeth tooth width 2mm outside diameter 14.5mm SKU: 26102700](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-27-teeth-tooth-width-2mm-outside-diameter-14-5mm-sku-26102700/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 26 teeth tooth width 2mm outside diameter 14mm SKU: 26102600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-26-teeth-tooth-width-2mm-outside-diameter-14mm-sku-26102600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 25 teeth tooth width 2mm outside diameter 13.5mm SKU: 26102500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-25-teeth-tooth-width-2mm-outside-diameter-13-5mm-sku-26102500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 24 teeth tooth width 2mm outside diameter 13mm SKU: 26102400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-24-teeth-tooth-width-2mm-outside-diameter-13mm-sku-26102400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 23 teeth tooth width 2mm outside diameter 12.5mm SKU: 26102300](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-23-teeth-tooth-width-2mm-outside-diameter-12-5mm-sku-26102300/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 22 teeth tooth width 2mm outside diameter 12mm SKU: 26102200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-22-teeth-tooth-width-2mm-outside-diameter-12mm-sku-26102200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 21 teeth tooth width 2mm outside diameter 11.5mm SKU: 26102100](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-21-teeth-tooth-width-2mm-outside-diameter-11-5mm-sku-26102100/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 20 teeth tooth width 2mm outside diameter 11mm SKU: 26102000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-20-teeth-tooth-width-2mm-outside-diameter-11mm-sku-26102000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 0.5 19 teeth tooth width 2mm outside diameter 10.5mm SKU: 26101900](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-19-teeth-tooth-width-2mm-outside-diameter-10-5mm-sku-26101900/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d DIN 58405. Pressure angle 20°. - [Ready-to-install flange nut Tr.28 x 5 single-start left material red brass SKU: 64477428](https://maedler.in/product/ready-to-install-flange-nut-tr-28-x-5-single-start-left-material-red-brass-sku-64477428/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.24 x 5 single-start left material red brass SKU: 64477424](https://maedler.in/product/ready-to-install-flange-nut-tr-24-x-5-single-start-left-material-red-brass-sku-64477424/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.20 x 4 single-start left material red brass SKU: 64477420](https://maedler.in/product/ready-to-install-flange-nut-tr-20-x-4-single-start-left-material-red-brass-sku-64477420/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.18 x 4 single-start left material red brass SKU: 64477418](https://maedler.in/product/ready-to-install-flange-nut-tr-18-x-4-single-start-left-material-red-brass-sku-64477418/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.16 x 4 single-start left material red brass SKU: 64477416](https://maedler.in/product/ready-to-install-flange-nut-tr-16-x-4-single-start-left-material-red-brass-sku-64477416/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.60 x 9 single-start left material cast iron SKU: 64477360](https://maedler.in/product/ready-to-install-flange-nut-tr-60-x-9-single-start-left-material-cast-iron-sku-64477360/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.50 x 8 single-start left material cast iron SKU: 64477350](https://maedler.in/product/ready-to-install-flange-nut-tr-50-x-8-single-start-left-material-cast-iron-sku-64477350/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.40 x 7 single-start left material cast iron SKU: 64477340](https://maedler.in/product/ready-to-install-flange-nut-tr-40-x-7-single-start-left-material-cast-iron-sku-64477340/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.36 x 6 single-start left material cast iron SKU: 64477336](https://maedler.in/product/ready-to-install-flange-nut-tr-36-x-6-single-start-left-material-cast-iron-sku-64477336/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.30 x 6 single-start left material cast iron SKU: 64477330](https://maedler.in/product/ready-to-install-flange-nut-tr-30-x-6-single-start-left-material-cast-iron-sku-64477330/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.24 x 5 single-start left material cast iron SKU: 64477324](https://maedler.in/product/ready-to-install-flange-nut-tr-24-x-5-single-start-left-material-cast-iron-sku-64477324/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.20 x 4 single-start left material cast iron SKU: 64477320](https://maedler.in/product/ready-to-install-flange-nut-tr-20-x-4-single-start-left-material-cast-iron-sku-64477320/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.16 x 4 single-start left material cast iron SKU: 64477316](https://maedler.in/product/ready-to-install-flange-nut-tr-16-x-4-single-start-left-material-cast-iron-sku-64477316/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.70 x 10 single-start right material red brass SKU: 64477170](https://maedler.in/product/ready-to-install-flange-nut-tr-70-x-10-single-start-right-material-red-brass-sku-64477170/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.60 x 9 single-start right material red brass SKU: 64477160](https://maedler.in/product/ready-to-install-flange-nut-tr-60-x-9-single-start-right-material-red-brass-sku-64477160/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.50 x 8 single-start right material red brass SKU: 64477150](https://maedler.in/product/ready-to-install-flange-nut-tr-50-x-8-single-start-right-material-red-brass-sku-64477150/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.40 x 7 single-start right material red brass SKU: 64477140](https://maedler.in/product/ready-to-install-flange-nut-tr-40-x-7-single-start-right-material-red-brass-sku-64477140/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.36 x 6 single-start right material red brass SKU: 64477136](https://maedler.in/product/ready-to-install-flange-nut-tr-36-x-6-single-start-right-material-red-brass-sku-64477136/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.30 x 6 single-start right material red brass SKU: 64477130](https://maedler.in/product/ready-to-install-flange-nut-tr-30-x-6-single-start-right-material-red-brass-sku-64477130/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.28 x 5 single-start right material red brass SKU: 64477128](https://maedler.in/product/ready-to-install-flange-nut-tr-28-x-5-single-start-right-material-red-brass-sku-64477128/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.24 x 5 single-start right material red brass SKU: 64477124](https://maedler.in/product/ready-to-install-flange-nut-tr-24-x-5-single-start-right-material-red-brass-sku-64477124/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.20 x 4 single-start right material red brass SKU: 64477120](https://maedler.in/product/ready-to-install-flange-nut-tr-20-x-4-single-start-right-material-red-brass-sku-64477120/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.18 x 4 single-start right material red brass SKU: 64477118](https://maedler.in/product/ready-to-install-flange-nut-tr-18-x-4-single-start-right-material-red-brass-sku-64477118/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.16 x 4 single-start right material red brass SKU: 64477116](https://maedler.in/product/ready-to-install-flange-nut-tr-16-x-4-single-start-right-material-red-brass-sku-64477116/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.60 x 9 single-start right material cast iron SKU: 64477060](https://maedler.in/product/ready-to-install-flange-nut-tr-60-x-9-single-start-right-material-cast-iron-sku-64477060/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.50 x 8 single-start right material cast iron SKU: 64477050](https://maedler.in/product/ready-to-install-flange-nut-tr-50-x-8-single-start-right-material-cast-iron-sku-64477050/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.40 x 7 single-start right material cast iron SKU: 64477040](https://maedler.in/product/ready-to-install-flange-nut-tr-40-x-7-single-start-right-material-cast-iron-sku-64477040/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.36 x 6 single-start right material cast iron SKU: 64477036](https://maedler.in/product/ready-to-install-flange-nut-tr-36-x-6-single-start-right-material-cast-iron-sku-64477036/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.30 x 6 single-start right material cast iron SKU: 64477030](https://maedler.in/product/ready-to-install-flange-nut-tr-30-x-6-single-start-right-material-cast-iron-sku-64477030/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.24 x 5 single-start right material cast iron SKU: 64477024](https://maedler.in/product/ready-to-install-flange-nut-tr-24-x-5-single-start-right-material-cast-iron-sku-64477024/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.20 x 4 single-start right material cast iron SKU: 64477020](https://maedler.in/product/ready-to-install-flange-nut-tr-20-x-4-single-start-right-material-cast-iron-sku-64477020/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr.16 x 4 single-start right material cast iron SKU: 64477016](https://maedler.in/product/ready-to-install-flange-nut-tr-16-x-4-single-start-right-material-cast-iron-sku-64477016/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, right handTolerance zone 7H. - [Adapter console KONA-95 bore D1=95mm D3=130 and 140mm thread=M12 and M16 x 25 SKU: 64470295](https://maedler.in/product/adapter-console-kona-95-bore-d195mm-d3130-and-140mm-threadm12-and-m16-x-25-sku-64470295/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-85 bore D1=85mm D3=105mm thread=M10 x 16 SKU: 64470285](https://maedler.in/product/adapter-console-kona-85-bore-d185mm-d3105mm-threadm10-x-16-sku-64470285/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-80 bore D1=80mm D3=120mm thread=M10 x 16 SKU: 64470280](https://maedler.in/product/adapter-console-kona-80-bore-d180mm-d3120mm-threadm10-x-16-sku-64470280/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-72 bore D1=72mm D3=90mm thread=M10 x 16 SKU: 64470272](https://maedler.in/product/adapter-console-kona-72-bore-d172mm-d390mm-threadm10-x-16-sku-64470272/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-63 bore D1=63mm D3=78mm thread=M8 x 15 SKU: 64470263](https://maedler.in/product/adapter-console-kona-63-bore-d163mm-d378mm-threadm8-x-15-sku-64470263/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-60 bore D1=60mm D3=95mm thread=M8 x 15 SKU: 64470260](https://maedler.in/product/adapter-console-kona-60-bore-d160mm-d395mm-threadm8-x-15-sku-64470260/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-55 bore D1=55mm D3=85mm thread=M6 x 12 SKU: 64470255](https://maedler.in/product/adapter-console-kona-55-bore-d155mm-d385mm-threadm6-x-12-sku-64470255/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-50 bore D1=50mm D3=68 and 65mm thread=M6 and M8 x 15 SKU: 64470250](https://maedler.in/product/adapter-console-kona-50-bore-d150mm-d368-and-65mm-threadm6-and-m8-x-15-sku-64470250/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-45 bore D1=45mm D3=58 and 65mm thread=M6 x 12 SKU: 64470245](https://maedler.in/product/adapter-console-kona-45-bore-d145mm-d358-and-65mm-threadm6-x-12-sku-64470245/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-40 bore D1=40mm D3=58mm thread=M6 x 12 SKU: 64470240](https://maedler.in/product/adapter-console-kona-40-bore-d140mm-d358mm-threadm6-x-12-sku-64470240/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-38 bore D1=38mm D3=50mm thread=M6 x 12 SKU: 64470238](https://maedler.in/product/adapter-console-kona-38-bore-d138mm-d350mm-threadm6-x-12-sku-64470238/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-32 bore D1=32mm D3=45mm thread=M6 x 12 SKU: 64470232](https://maedler.in/product/adapter-console-kona-32-bore-d132mm-d345mm-threadm6-x-12-sku-64470232/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-30 bore D1=30mm D3=45mm thread=M6 x 12 SKU: 64470230](https://maedler.in/product/adapter-console-kona-30-bore-d130mm-d345mm-threadm6-x-12-sku-64470230/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-28 bore D1=28mm D3=38mm thread=M5 x 10 SKU: 64470228](https://maedler.in/product/adapter-console-kona-28-bore-d128mm-d338mm-threadm5-x-10-sku-64470228/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-26 bore D1=26mm D3=38mm thread=M5 x 10 SKU: 64470226](https://maedler.in/product/adapter-console-kona-26-bore-d126mm-d338mm-threadm5-x-10-sku-64470226/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Adapter console KONA-25 bore D1=25mm D3=35mm thread=M5 x 10 SKU: 64470225](https://maedler.in/product/adapter-console-kona-25-bore-d125mm-d335mm-threadm5-x-10-sku-64470225/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-95 bore D1=95mm D3=130 and 140mm thread=M12 and M16 x 20 SKU: 64470195](https://maedler.in/product/cardan-adapter-kara-95-bore-d195mm-d3130-and-140mm-threadm12-and-m16-x-20-sku-64470195/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-85 bore D1=85mm D3=105mm thread=M10 x 16 SKU: 64470185](https://maedler.in/product/cardan-adapter-kara-85-bore-d185mm-d3105mm-threadm10-x-16-sku-64470185/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-80 bore D1=80mm D3=120mm thread=M10 x 16 SKU: 64470180](https://maedler.in/product/cardan-adapter-kara-80-bore-d180mm-d3120mm-threadm10-x-16-sku-64470180/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-72 bore D1=72mm D3=90mm thread=M10 x 16 SKU: 64470172](https://maedler.in/product/cardan-adapter-kara-72-bore-d172mm-d390mm-threadm10-x-16-sku-64470172/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-63 bore D1=63mm D3=78mm thread=M8 x 15 SKU: 64470163](https://maedler.in/product/cardan-adapter-kara-63-bore-d163mm-d378mm-threadm8-x-15-sku-64470163/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-60 bore D1=60mm D3=95mm thread=M8 x 15 SKU: 64470160](https://maedler.in/product/cardan-adapter-kara-60-bore-d160mm-d395mm-threadm8-x-15-sku-64470160/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-55 bore D1=55mm D3=85mm thread=M6 x 12 SKU: 64470155](https://maedler.in/product/cardan-adapter-kara-55-bore-d155mm-d385mm-threadm6-x-12-sku-64470155/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-50 bore D1=50mm D3=68 and 65mm thread=M6 and M8 x 15 SKU: 64470150](https://maedler.in/product/cardan-adapter-kara-50-bore-d150mm-d368-and-65mm-threadm6-and-m8-x-15-sku-64470150/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-45 bore D1=45mm D3=58 and 65mm thread=M6 x 12 SKU: 64470145](https://maedler.in/product/cardan-adapter-kara-45-bore-d145mm-d358-and-65mm-threadm6-x-12-sku-64470145/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-40 bore D1=40mm D3=58mm thread=M6 x 12 SKU: 64470140](https://maedler.in/product/cardan-adapter-kara-40-bore-d140mm-d358mm-threadm6-x-12-sku-64470140/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-38 bore D1=38mm D3=50mm thread=M6 x 12 SKU: 64470138](https://maedler.in/product/cardan-adapter-kara-38-bore-d138mm-d350mm-threadm6-x-12-sku-64470138/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-32 bore D1=32mm D3=45mm thread=M6 x 12 SKU: 64470132](https://maedler.in/product/cardan-adapter-kara-32-bore-d132mm-d345mm-threadm6-x-12-sku-64470132/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-30 bore D1=30mm D3=45mm thread=M6 x 12 SKU: 64470130](https://maedler.in/product/cardan-adapter-kara-30-bore-d130mm-d345mm-threadm6-x-12-sku-64470130/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-28 bore D1=28mm D3=38mm thread=M5 x 10 SKU: 64470128](https://maedler.in/product/cardan-adapter-kara-28-bore-d128mm-d338mm-threadm5-x-10-sku-64470128/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-26 bore D1=26mm D3=38mm thread=M5 x 10 SKU: 64470126](https://maedler.in/product/cardan-adapter-kara-26-bore-d126mm-d338mm-threadm5-x-10-sku-64470126/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Cardan adapter KARA-25 bore D1=25mm D3=35mm thread=M5 x 10 SKU: 64470125](https://maedler.in/product/cardan-adapter-kara-25-bore-d125mm-d335mm-threadm5-x-10-sku-64470125/): Material: Steel, black oxide finish. Strength min. 350 N/mm2.Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.* With 2 different drilling patterns on front and back side.** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.The drill pattern on the backside is 30° displaced to the frontside. - [Round flange trapezoidal nut Tr.60 x 9 single-start left material red brass SKU: 64446000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-60-x-9-single-start-left-material-red-brass-sku-64446000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.52 x 8 single-start left material red brass SKU: 64445200](https://maedler.in/product/round-flange-trapezoidal-nut-tr-52-x-8-single-start-left-material-red-brass-sku-64445200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.50 x 8 single-start left material red brass SKU: 64445000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-50-x-8-single-start-left-material-red-brass-sku-64445000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.48 x 8 single-start left material red brass SKU: 64444800](https://maedler.in/product/round-flange-trapezoidal-nut-tr-48-x-8-single-start-left-material-red-brass-sku-64444800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.44 x 7 single-start left material red brass SKU: 64444400](https://maedler.in/product/round-flange-trapezoidal-nut-tr-44-x-7-single-start-left-material-red-brass-sku-64444400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.40 x 7 single-start left material red brass SKU: 64444000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-40-x-7-single-start-left-material-red-brass-sku-64444000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.36 x 6 single-start left material red brass SKU: 64443600](https://maedler.in/product/round-flange-trapezoidal-nut-tr-36-x-6-single-start-left-material-red-brass-sku-64443600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.32 x 6 single-start left material red brass SKU: 64443200](https://maedler.in/product/round-flange-trapezoidal-nut-tr-32-x-6-single-start-left-material-red-brass-sku-64443200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.30 x 6 single-start left material red brass SKU: 64443000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-30-x-6-single-start-left-material-red-brass-sku-64443000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.28 x 5 single-start left material red brass SKU: 64442800](https://maedler.in/product/round-flange-trapezoidal-nut-tr-28-x-5-single-start-left-material-red-brass-sku-64442800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.24 x 5 single-start left material red brass SKU: 64442400](https://maedler.in/product/round-flange-trapezoidal-nut-tr-24-x-5-single-start-left-material-red-brass-sku-64442400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.20 x 4 single-start left material red brass SKU: 64442000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-20-x-4-single-start-left-material-red-brass-sku-64442000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.18 x 4 single-start left material red brass SKU: 64441800](https://maedler.in/product/round-flange-trapezoidal-nut-tr-18-x-4-single-start-left-material-red-brass-sku-64441800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.16 x 4 single-start left material red brass SKU: 64441600](https://maedler.in/product/round-flange-trapezoidal-nut-tr-16-x-4-single-start-left-material-red-brass-sku-64441600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.14 x 4 single-start left material red brass SKU: 64441400](https://maedler.in/product/round-flange-trapezoidal-nut-tr-14-x-4-single-start-left-material-red-brass-sku-64441400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.12 x 3 single-start left material red brass SKU: 64441200](https://maedler.in/product/round-flange-trapezoidal-nut-tr-12-x-3-single-start-left-material-red-brass-sku-64441200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.10 x 3 single-start left material red brass SKU: 64441000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-10-x-3-single-start-left-material-red-brass-sku-64441000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.60 x 9 single-start right material red brass SKU: 64416000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-60-x-9-single-start-right-material-red-brass-sku-64416000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.52 x 8 single-start right material red brass SKU: 64415200](https://maedler.in/product/round-flange-trapezoidal-nut-tr-52-x-8-single-start-right-material-red-brass-sku-64415200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.50 x 8 single-start right material red brass SKU: 64415000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-50-x-8-single-start-right-material-red-brass-sku-64415000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.48 x 8 single-start right material red brass SKU: 64414800](https://maedler.in/product/round-flange-trapezoidal-nut-tr-48-x-8-single-start-right-material-red-brass-sku-64414800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.44 x 7 single-start right material red brass SKU: 64414400](https://maedler.in/product/round-flange-trapezoidal-nut-tr-44-x-7-single-start-right-material-red-brass-sku-64414400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.40 x 7 single-start right material red brass SKU: 64414000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-40-x-7-single-start-right-material-red-brass-sku-64414000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.36 x 6 single-start right material red brass SKU: 64413600](https://maedler.in/product/round-flange-trapezoidal-nut-tr-36-x-6-single-start-right-material-red-brass-sku-64413600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.32 x 6 single-start right material red brass SKU: 64413200](https://maedler.in/product/round-flange-trapezoidal-nut-tr-32-x-6-single-start-right-material-red-brass-sku-64413200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.30 x 6 single-start right material red brass SKU: 64413000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-30-x-6-single-start-right-material-red-brass-sku-64413000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.28 x 5 single-start right material red brass SKU: 64412800](https://maedler.in/product/round-flange-trapezoidal-nut-tr-28-x-5-single-start-right-material-red-brass-sku-64412800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.24 x 5 single-start right material red brass SKU: 64412400](https://maedler.in/product/round-flange-trapezoidal-nut-tr-24-x-5-single-start-right-material-red-brass-sku-64412400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.20 x 4 single-start right material red brass SKU: 64412000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-20-x-4-single-start-right-material-red-brass-sku-64412000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.18 x 4 single-start right material red brass SKU: 64411800](https://maedler.in/product/round-flange-trapezoidal-nut-tr-18-x-4-single-start-right-material-red-brass-sku-64411800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.16 x 4 single-start right material red brass SKU: 64411600](https://maedler.in/product/round-flange-trapezoidal-nut-tr-16-x-4-single-start-right-material-red-brass-sku-64411600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.14 x 4 single-start right material red brass SKU: 64411400](https://maedler.in/product/round-flange-trapezoidal-nut-tr-14-x-4-single-start-right-material-red-brass-sku-64411400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.12 x 3 single-start right material red brass SKU: 64411200](https://maedler.in/product/round-flange-trapezoidal-nut-tr-12-x-3-single-start-right-material-red-brass-sku-64411200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.10 x 3 single-start right material red brass SKU: 64411000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-10-x-3-single-start-right-material-red-brass-sku-64411000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr.60 x 9 single-start right material cast iron SKU: 64406000](https://maedler.in/product/round-flange-trapezoidal-nut-tr-60-x-9-single-start-right-material-cast-iron-sku-64406000/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Round flange trapezoidal nut Tr.52 x 8 single-start right material cast iron SKU: 64405200](https://maedler.in/product/round-flange-trapezoidal-nut-tr-52-x-8-single-start-right-material-cast-iron-sku-64405200/): Material: Grey cast iron GG25. Tolerance zone 7H. - [Spur gear made of polyketone die-cast with hub module 0.5 75 teeth tooth width 3mm outside diameter 38,5mm SKU: 28107501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-75-teeth-tooth-width-3mm-outside-diameter-385mm-sku-28107501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 75 teeth tooth width 3mm outside diameter 38.5mm SKU: 28107500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-75-teeth-tooth-width-3mm-outside-diameter-38-5mm-sku-28107500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 72 teeth tooth width 3mm outside diameter 37mm SKU: 28107201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-72-teeth-tooth-width-3mm-outside-diameter-37mm-sku-28107201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 72 teeth tooth width 3mm outside diameter 37mm SKU: 28107200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-72-teeth-tooth-width-3mm-outside-diameter-37mm-sku-28107200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 70 teeth tooth width 3mm outside diameter 36mm SKU: 28107001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-70-teeth-tooth-width-3mm-outside-diameter-36mm-sku-28107001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 70 teeth tooth width 3mm outside diameter 36mm SKU: 28107000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-70-teeth-tooth-width-3mm-outside-diameter-36mm-sku-28107000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 65 teeth tooth width 3mm outside diameter 33,5mm SKU: 28106501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-65-teeth-tooth-width-3mm-outside-diameter-335mm-sku-28106501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 65 teeth tooth width 3mm outside diameter 33.5mm SKU: 28106500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-65-teeth-tooth-width-3mm-outside-diameter-33-5mm-sku-28106500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 64 teeth tooth width 3mm outside diameter 33mm SKU: 28106401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-64-teeth-tooth-width-3mm-outside-diameter-33mm-sku-28106401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 64 teeth tooth width 3mm outside diameter 33mm SKU: 28106400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-64-teeth-tooth-width-3mm-outside-diameter-33mm-sku-28106400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 60 teeth tooth width 3mm outside diameter 31mm SKU: 28106001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-60-teeth-tooth-width-3mm-outside-diameter-31mm-sku-28106001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 60 teeth tooth width 3mm outside diameter 31mm SKU: 28106000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-60-teeth-tooth-width-3mm-outside-diameter-31mm-sku-28106000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 56 teeth tooth width 3mm outside diameter 29mm SKU: 28105601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-56-teeth-tooth-width-3mm-outside-diameter-29mm-sku-28105601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 56 teeth tooth width 3mm outside diameter 29mm SKU: 28105600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-56-teeth-tooth-width-3mm-outside-diameter-29mm-sku-28105600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 55 teeth tooth width 3mm outside diameter 28,5mm SKU: 28105501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-55-teeth-tooth-width-3mm-outside-diameter-285mm-sku-28105501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 55 teeth tooth width 3mm outside diameter 28.5mm SKU: 28105500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-55-teeth-tooth-width-3mm-outside-diameter-28-5mm-sku-28105500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 54 teeth tooth width 3mm outside diameter 28mm SKU: 28105401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-54-teeth-tooth-width-3mm-outside-diameter-28mm-sku-28105401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 54 teeth tooth width 3mm outside diameter 28mm SKU: 28105400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-54-teeth-tooth-width-3mm-outside-diameter-28mm-sku-28105400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 52 teeth tooth width 3mm outside diameter 27mm SKU: 28105201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-52-teeth-tooth-width-3mm-outside-diameter-27mm-sku-28105201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 52 teeth tooth width 3mm outside diameter 27mm SKU: 28105200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-52-teeth-tooth-width-3mm-outside-diameter-27mm-sku-28105200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 50 teeth tooth width 3mm outside diameter 26mm SKU: 28105001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-50-teeth-tooth-width-3mm-outside-diameter-26mm-sku-28105001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 50 teeth tooth width 3mm outside diameter 26mm SKU: 28105000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-50-teeth-tooth-width-3mm-outside-diameter-26mm-sku-28105000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 48 teeth tooth width 3mm outside diameter 25mm SKU: 28104801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-48-teeth-tooth-width-3mm-outside-diameter-25mm-sku-28104801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 48 teeth tooth width 3mm outside diameter 25mm SKU: 28104800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-48-teeth-tooth-width-3mm-outside-diameter-25mm-sku-28104800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 45 teeth tooth width 3mm outside diameter 23,5mm SKU: 28104501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-45-teeth-tooth-width-3mm-outside-diameter-235mm-sku-28104501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 45 teeth tooth width 3mm outside diameter 23.5mm SKU: 28104500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-45-teeth-tooth-width-3mm-outside-diameter-23-5mm-sku-28104500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 42 teeth tooth width 3mm outside diameter 22mm SKU: 28104201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-42-teeth-tooth-width-3mm-outside-diameter-22mm-sku-28104201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 42 teeth tooth width 3mm outside diameter 22mm SKU: 28104200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-42-teeth-tooth-width-3mm-outside-diameter-22mm-sku-28104200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 40 teeth tooth width 3mm outside diameter 21mm SKU: 28104001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-40-teeth-tooth-width-3mm-outside-diameter-21mm-sku-28104001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 40 teeth tooth width 3mm outside diameter 21mm SKU: 28104000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-40-teeth-tooth-width-3mm-outside-diameter-21mm-sku-28104000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 38 teeth tooth width 3mm outside diameter 20mm SKU: 28103801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-38-teeth-tooth-width-3mm-outside-diameter-20mm-sku-28103801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 38 teeth tooth width 3mm outside diameter 20mm SKU: 28103800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-38-teeth-tooth-width-3mm-outside-diameter-20mm-sku-28103800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 36 teeth tooth width 3mm outside diameter 19mm SKU: 28103601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-36-teeth-tooth-width-3mm-outside-diameter-19mm-sku-28103601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 36 teeth tooth width 3mm outside diameter 19mm SKU: 28103600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-36-teeth-tooth-width-3mm-outside-diameter-19mm-sku-28103600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 35 teeth tooth width 3mm outside diameter 18,5mm SKU: 28103501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-35-teeth-tooth-width-3mm-outside-diameter-185mm-sku-28103501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 35 teeth tooth width 3mm outside diameter 18.5mm SKU: 28103500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-35-teeth-tooth-width-3mm-outside-diameter-18-5mm-sku-28103500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 32 teeth tooth width 3mm outside diameter 17mm SKU: 28103201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-32-teeth-tooth-width-3mm-outside-diameter-17mm-sku-28103201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 32 teeth tooth width 3mm outside diameter 17mm SKU: 28103200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-32-teeth-tooth-width-3mm-outside-diameter-17mm-sku-28103200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 30 teeth tooth width 3mm outside diameter 16mm SKU: 28103001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-30-teeth-tooth-width-3mm-outside-diameter-16mm-sku-28103001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 30 teeth tooth width 3mm outside diameter 16mm SKU: 28103000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-30-teeth-tooth-width-3mm-outside-diameter-16mm-sku-28103000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 28 teeth tooth width 3mm outside diameter 15mm SKU: 28102801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-28-teeth-tooth-width-3mm-outside-diameter-15mm-sku-28102801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 28 teeth tooth width 3mm outside diameter 15mm SKU: 28102800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-28-teeth-tooth-width-3mm-outside-diameter-15mm-sku-28102800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 27 teeth tooth width 3mm outside diameter 14,5mm SKU: 28102701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-27-teeth-tooth-width-3mm-outside-diameter-145mm-sku-28102701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 27 teeth tooth width 3mm outside diameter 14.5mm SKU: 28102700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-27-teeth-tooth-width-3mm-outside-diameter-14-5mm-sku-28102700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 26 teeth tooth width 3mm outside diameter 14mm SKU: 28102601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-26-teeth-tooth-width-3mm-outside-diameter-14mm-sku-28102601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 26 teeth tooth width 3mm outside diameter 14mm SKU: 28102600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-26-teeth-tooth-width-3mm-outside-diameter-14mm-sku-28102600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 25 teeth tooth width 3mm outside diameter 13,5mm SKU: 28102501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-25-teeth-tooth-width-3mm-outside-diameter-135mm-sku-28102501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 25 teeth tooth width 3mm outside diameter 13.5mm SKU: 28102500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-25-teeth-tooth-width-3mm-outside-diameter-13-5mm-sku-28102500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 24 teeth tooth width 3mm outside diameter 13mm SKU: 28102401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-24-teeth-tooth-width-3mm-outside-diameter-13mm-sku-28102401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 24 teeth tooth width 3mm outside diameter 13mm SKU: 28102400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-24-teeth-tooth-width-3mm-outside-diameter-13mm-sku-28102400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 23 teeth tooth width 3mm outside diameter 12,5mm SKU: 28102301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-23-teeth-tooth-width-3mm-outside-diameter-125mm-sku-28102301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 23 teeth tooth width 3mm outside diameter 12.5mm SKU: 28102300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-23-teeth-tooth-width-3mm-outside-diameter-12-5mm-sku-28102300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 22 teeth tooth width 3mm outside diameter 12mm SKU: 28102201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-22-teeth-tooth-width-3mm-outside-diameter-12mm-sku-28102201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 22 teeth tooth width 3mm outside diameter 12mm SKU: 28102200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-22-teeth-tooth-width-3mm-outside-diameter-12mm-sku-28102200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 21 teeth tooth width 3mm outside diameter 11,5mm SKU: 28102101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-21-teeth-tooth-width-3mm-outside-diameter-115mm-sku-28102101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 21 teeth tooth width 3mm outside diameter 11.5mm SKU: 28102100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-21-teeth-tooth-width-3mm-outside-diameter-11-5mm-sku-28102100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 20 teeth tooth width 3mm outside diameter 11mm SKU: 28102001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-20-teeth-tooth-width-3mm-outside-diameter-11mm-sku-28102001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 20 teeth tooth width 3mm outside diameter 11mm SKU: 28102000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-20-teeth-tooth-width-3mm-outside-diameter-11mm-sku-28102000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 19 teeth tooth width 3mm outside diameter 10,5mm SKU: 28101901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-19-teeth-tooth-width-3mm-outside-diameter-105mm-sku-28101901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 19 teeth tooth width 3mm outside diameter 10.5mm SKU: 28101900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-19-teeth-tooth-width-3mm-outside-diameter-10-5mm-sku-28101900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 18 teeth tooth width 3mm outside diameter 10mm SKU: 28101801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-18-teeth-tooth-width-3mm-outside-diameter-10mm-sku-28101801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 18 teeth tooth width 3mm outside diameter 10mm SKU: 28101800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-18-teeth-tooth-width-3mm-outside-diameter-10mm-sku-28101800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 17 teeth tooth width 3mm outside diameter 9,5mm SKU: 28101701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-17-teeth-tooth-width-3mm-outside-diameter-95mm-sku-28101701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 17 teeth tooth width 3mm outside diameter 9.5mm SKU: 28101700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-17-teeth-tooth-width-3mm-outside-diameter-9-5mm-sku-28101700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 16 teeth tooth width 3mm outside diameter 9mm SKU: 28101601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-16-teeth-tooth-width-3mm-outside-diameter-9mm-sku-28101601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 16 teeth tooth width 3mm outside diameter 9mm SKU: 28101600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-16-teeth-tooth-width-3mm-outside-diameter-9mm-sku-28101600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 15 teeth tooth width 3mm outside diameter 8,5mm SKU: 28101501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-15-teeth-tooth-width-3mm-outside-diameter-85mm-sku-28101501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 15 teeth tooth width 3mm outside diameter 8.5mm SKU: 28101500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-15-teeth-tooth-width-3mm-outside-diameter-8-5mm-sku-28101500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 14 teeth tooth width 3mm outside diameter 8mm SKU: 28101401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-14-teeth-tooth-width-3mm-outside-diameter-8mm-sku-28101401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 14 teeth tooth width 3mm outside diameter 8mm SKU: 28101400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-14-teeth-tooth-width-3mm-outside-diameter-8mm-sku-28101400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 13 teeth tooth width 3mm outside diameter 7,5mm SKU: 28101301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-13-teeth-tooth-width-3mm-outside-diameter-75mm-sku-28101301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 13 teeth tooth width 3mm outside diameter 7.5mm SKU: 28101300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-13-teeth-tooth-width-3mm-outside-diameter-7-5mm-sku-28101300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 12 teeth tooth width 3mm outside diameter 7mm SKU: 28101201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-12-teeth-tooth-width-3mm-outside-diameter-7mm-sku-28101201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 12 teeth tooth width 3mm outside diameter 7mm SKU: 28101200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-12-teeth-tooth-width-3mm-outside-diameter-7mm-sku-28101200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of brass Ms58 with hub module 1 120 teeth tooth width 6.5mm outside diameter 122mm SKU: 26312000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-120-teeth-tooth-width-6-5mm-outside-diameter-122mm-sku-26312000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 100 teeth tooth width 6.5mm outside diameter 102mm SKU: 26310000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-100-teeth-tooth-width-6-5mm-outside-diameter-102mm-sku-26310000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 96 teeth tooth width 6.5mm outside diameter 98mm SKU: 26309600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-96-teeth-tooth-width-6-5mm-outside-diameter-98mm-sku-26309600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 90 teeth tooth width 6.5mm outside diameter 92mm SKU: 26309000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-90-teeth-tooth-width-6-5mm-outside-diameter-92mm-sku-26309000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 85 teeth tooth width 6.5mm outside diameter 87mm SKU: 26308500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-85-teeth-tooth-width-6-5mm-outside-diameter-87mm-sku-26308500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 80 teeth tooth width 6.5mm outside diameter 82mm SKU: 26308000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-80-teeth-tooth-width-6-5mm-outside-diameter-82mm-sku-26308000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 75 teeth tooth width 6.5mm outside diameter 77mm SKU: 26307500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-75-teeth-tooth-width-6-5mm-outside-diameter-77mm-sku-26307500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 72 teeth tooth width 6.5mm outside diameter 74mm SKU: 26307200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-72-teeth-tooth-width-6-5mm-outside-diameter-74mm-sku-26307200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 70 teeth tooth width 6.5mm outside diameter 72mm SKU: 26307000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-70-teeth-tooth-width-6-5mm-outside-diameter-72mm-sku-26307000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 65 teeth tooth width 6.5mm outside diameter 67mm SKU: 26306500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-65-teeth-tooth-width-6-5mm-outside-diameter-67mm-sku-26306500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 64 teeth tooth width 6.5mm outside diameter 66mm SKU: 26306400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-64-teeth-tooth-width-6-5mm-outside-diameter-66mm-sku-26306400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 60 teeth tooth width 6.5mm outside diameter 62mm SKU: 26306000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-60-teeth-tooth-width-6-5mm-outside-diameter-62mm-sku-26306000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 56 teeth tooth width 6.5mm outside diameter 58mm SKU: 26305600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-56-teeth-tooth-width-6-5mm-outside-diameter-58mm-sku-26305600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 55 teeth tooth width 6.5mm outside diameter 57mm SKU: 26305500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-55-teeth-tooth-width-6-5mm-outside-diameter-57mm-sku-26305500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 54 teeth tooth width 6.5mm outside diameter 56mm SKU: 26305400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-54-teeth-tooth-width-6-5mm-outside-diameter-56mm-sku-26305400/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 52 teeth tooth width 6.5mm outside diameter 54mm SKU: 26305200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-52-teeth-tooth-width-6-5mm-outside-diameter-54mm-sku-26305200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 50 teeth tooth width 6.5mm outside diameter 52mm SKU: 26305000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-50-teeth-tooth-width-6-5mm-outside-diameter-52mm-sku-26305000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 48 teeth tooth width 6.5mm outside diameter 50mm SKU: 26304800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-48-teeth-tooth-width-6-5mm-outside-diameter-50mm-sku-26304800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 45 teeth tooth width 6.5mm outside diameter 47mm SKU: 26304500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-45-teeth-tooth-width-6-5mm-outside-diameter-47mm-sku-26304500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 42 teeth tooth width 6.5mm outside diameter 44mm SKU: 26304200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-42-teeth-tooth-width-6-5mm-outside-diameter-44mm-sku-26304200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 40 teeth tooth width 6.5mm outside diameter 42mm SKU: 26304000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-40-teeth-tooth-width-6-5mm-outside-diameter-42mm-sku-26304000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 38 teeth tooth width 6.5mm outside diameter 40mm SKU: 26303800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-38-teeth-tooth-width-6-5mm-outside-diameter-40mm-sku-26303800/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 36 teeth tooth width 6.5mm outside diameter 38mm SKU: 26303600](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-36-teeth-tooth-width-6-5mm-outside-diameter-38mm-sku-26303600/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 35 teeth tooth width 6.5mm outside diameter 37mm SKU: 26303500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-35-teeth-tooth-width-6-5mm-outside-diameter-37mm-sku-26303500/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 32 teeth tooth width 6.5mm outside diameter 34mm SKU: 26303200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-32-teeth-tooth-width-6-5mm-outside-diameter-34mm-sku-26303200/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Spur gear made of brass Ms58 with hub module 1 30 teeth tooth width 6.5mm outside diameter 32mm SKU: 26303000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-1-30-teeth-tooth-width-6-5mm-outside-diameter-32mm-sku-26303000/): Material: Brass Ms58 (2.0401). Milled, straight teeth. Tooth quality 8d25 DIN 58405. Pressure angle 20°. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 10mm SKU: 64601010](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-10mm-sku-64601010/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3-ST ISO series 5 sealed on both sides for shaft Ø 10mm SKU: 64601006](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-5-sealed-on-both-sides-for-shaft-o-10mm-sku-64601006/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 8mm SKU: 64600808](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-8mm-sku-64600808/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 8mm long version SKU: 64600806VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-8mm-long-version-sku-64600806vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 8mm short version SKU: 64600806V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-8mm-short-version-sku-64600806v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 8mm long version SKU: 64600806FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-8mm-long-version-sku-64600806fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 8mm short version SKU: 64600806F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-8mm-short-version-sku-64600806f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 8mm SKU: 64600806](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-8mm-sku-64600806/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3 ISO series 3 premium with shields for shaft Ø 8mm SKU: 64600800](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-shields-for-shaft-o-8mm-sku-64600800/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3-ST ISO series 5 sealed on both sides for shaft Ø 6mm SKU: 64600706](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-5-sealed-on-both-sides-for-shaft-o-6mm-sku-64600706/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 6mm long version SKU: 64600606VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-6mm-long-version-sku-64600606vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 6mm short version SKU: 64600606V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-6mm-short-version-sku-64600606v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 6mm long version SKU: 64600606FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-6mm-long-version-sku-64600606fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 6mm short version SKU: 64600606F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-6mm-short-version-sku-64600606f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 6mm SKU: 64600606](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-6mm-sku-64600606/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 5mm SKU: 64600506](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-5mm-sku-64600506/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 5mm SKU: 64600505](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-5mm-sku-64600505/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with shields for shaft Ø 5mm SKU: 64600500](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-shields-for-shaft-o-5mm-sku-64600500/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 4mm SKU: 64600404](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-4mm-sku-64600404/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 3mm SKU: 64600303](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-3mm-sku-64600303/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Round trapezoidal nut nylatron Tr.40 x 14 P7 double-thread right length 80mm outer diameter 80mm SKU: 64594000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-40-x-14-p7-double-thread-right-length-80mm-outer-diameter-80mm-sku-64594000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.30 x 12 P6 double-thread right length 60mm outer diameter 60mm SKU: 64593000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-30-x-12-p6-double-thread-right-length-60mm-outer-diameter-60mm-sku-64593000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.24 x 10 P5 double-thread right length 48mm outer diameter 50mm SKU: 64592400](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-24-x-10-p5-double-thread-right-length-48mm-outer-diameter-50mm-sku-64592400/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.20 x 8 P4 double-thread right length 40mm outer diameter 45mm SKU: 64592000](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-20-x-8-p4-double-thread-right-length-40mm-outer-diameter-45mm-sku-64592000/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.16 x 8 P4 double-thread right length 32mm outer diameter 36mm SKU: 64591600](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-16-x-8-p4-double-thread-right-length-32mm-outer-diameter-36mm-sku-64591600/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut nylatron Tr.12 x 6 P3 double-thread right length 24mm outer diameter 26mm SKU: 64591200](https://maedler.in/product/round-trapezoidal-nut-nylatron-tr-12-x-6-p3-double-thread-right-length-24mm-outer-diameter-26mm-sku-64591200/): Material: Plastic (PA6.6 with MoS2), black. Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass 7 Tr.40 x 14 P7 double-thread right length 80mm outer diameter 80mm SKU: 64584000](https://maedler.in/product/round-trapezoidal-nut-red-brass-7-tr-40-x-14-p7-double-thread-right-length-80mm-outer-diameter-80mm-sku-64584000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass 7 Tr.30 x 12 P6 double-thread right length 60mm outer diameter 60mm SKU: 64583000](https://maedler.in/product/round-trapezoidal-nut-red-brass-7-tr-30-x-12-p6-double-thread-right-length-60mm-outer-diameter-60mm-sku-64583000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass 7 Tr.24 x 10P5 double-thread right length 48mm outer diameter 50mm SKU: 64582400](https://maedler.in/product/round-trapezoidal-nut-red-brass-7-tr-24-x-10p5-double-thread-right-length-48mm-outer-diameter-50mm-sku-64582400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass 7 Tr.20 x 8 P4 double-thread right length 40mm outer diameter 45mm SKU: 64582000](https://maedler.in/product/round-trapezoidal-nut-red-brass-7-tr-20-x-8-p4-double-thread-right-length-40mm-outer-diameter-45mm-sku-64582000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass 7 Tr.16 x 8 P4 double-thread right length 32mm outer diameter 36mm SKU: 64581600](https://maedler.in/product/round-trapezoidal-nut-red-brass-7-tr-16-x-8-p4-double-thread-right-length-32mm-outer-diameter-36mm-sku-64581600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Round trapezoidal nut red brass 7 Tr.12 x 6 P3 double-thread right length 24mm outer diameter 26mm SKU: 64581200](https://maedler.in/product/round-trapezoidal-nut-red-brass-7-tr-12-x-6-p3-double-thread-right-length-24mm-outer-diameter-26mm-sku-64581200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C). Tolerance zone 7H. Height = 2 x diameter. - [Ready-to install flange nut EFM long Tr.40x14 double thread right hand material red brass SKU: 64577540](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-40x14-double-thread-right-hand-material-red-brass-sku-64577540/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, Double-Thread, right handTolerance zone 7H. - [Ready-to install flange nut EFM long Tr.30x12 double thread right hand material red brass SKU: 64577530](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-30x12-double-thread-right-hand-material-red-brass-sku-64577530/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, Double-Thread, right handTolerance zone 7H. - [Ready-to install flange nut EFM long Tr.24x10 double thread right hand material red brass SKU: 64577524](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-24x10-double-thread-right-hand-material-red-brass-sku-64577524/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, Double-Thread, right handTolerance zone 7H. - [Ready-to install flange nut EFM long Tr.20x8 double thread right hand material red brass SKU: 64577520](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-20x8-double-thread-right-hand-material-red-brass-sku-64577520/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, Double-Thread, right handTolerance zone 7H. - [Ready-to install flange nut EFM long Tr.16x8 double thread right hand material red brass SKU: 64577516](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-16x8-double-thread-right-hand-material-red-brass-sku-64577516/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, Double-Thread, right handTolerance zone 7H. - [Ready-to install flange nut EFM long Tr.12x6 double thread right hand material red brass SKU: 64577512](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-12x6-double-thread-right-hand-material-red-brass-sku-64577512/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, Double-Thread, right handTolerance zone 7H. - [Ready-to-install flange nut Tr. 40 x 14 P7 double-thread right hand material red brass SKU: 64577140](https://maedler.in/product/ready-to-install-flange-nut-tr-40-x-14-p7-double-thread-right-hand-material-red-brass-sku-64577140/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Ready-to-install flange nut Tr. 30 x 12 P6 double-thread right hand material red brass SKU: 64577130](https://maedler.in/product/ready-to-install-flange-nut-tr-30-x-12-p6-double-thread-right-hand-material-red-brass-sku-64577130/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Ready-to-install flange nut Tr. 24 x 10 P5 double-thread right hand material red brass SKU: 64577124](https://maedler.in/product/ready-to-install-flange-nut-tr-24-x-10-p5-double-thread-right-hand-material-red-brass-sku-64577124/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Ready-to-install flange nut Tr. 20 x 8 P4 double-thread right hand material red brass SKU: 64577120](https://maedler.in/product/ready-to-install-flange-nut-tr-20-x-8-p4-double-thread-right-hand-material-red-brass-sku-64577120/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Ready-to-install flange nut Tr. 16 x 8 P4 double-thread right hand material red brass SKU: 64577116](https://maedler.in/product/ready-to-install-flange-nut-tr-16-x-8-p4-double-thread-right-hand-material-red-brass-sku-64577116/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Ready-to-install flange nut Tr. 40 x 14 P7 double-thread right hand material cast iron SKU: 64577040](https://maedler.in/product/ready-to-install-flange-nut-tr-40-x-14-p7-double-thread-right-hand-material-cast-iron-sku-64577040/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Ready-to-install flange nut Tr. 30 x 12 P6 double-thread right hand material cast iron SKU: 64577030](https://maedler.in/product/ready-to-install-flange-nut-tr-30-x-12-p6-double-thread-right-hand-material-cast-iron-sku-64577030/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Ready-to-install flange nut Tr. 24 x 10 P5 double-thread right hand material cast iron SKU: 64577024](https://maedler.in/product/ready-to-install-flange-nut-tr-24-x-10-p5-double-thread-right-hand-material-cast-iron-sku-64577024/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Ready-to-install flange nut Tr. 20 x 8 P4 double-thread right hand material cast iron SKU: 64577020](https://maedler.in/product/ready-to-install-flange-nut-tr-20-x-8-p4-double-thread-right-hand-material-cast-iron-sku-64577020/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Ready-to-install flange nut Tr. 16 x 8 P4 double-thread right hand material cast iron SKU: 64577016](https://maedler.in/product/ready-to-install-flange-nut-tr-16-x-8-p4-double-thread-right-hand-material-cast-iron-sku-64577016/): Material: Grey cast iron GG25.Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Double-thread, Right HandTolerance zone 7H. - [Round trapezoidal nut steel Tr.40x14 P7 double-thread right length 60mm outer diameter 80mm SKU: 64564000](https://maedler.in/product/round-trapezoidal-nut-steel-tr-40x14-p7-double-thread-right-length-60mm-outer-diameter-80mm-sku-64564000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel Tr.30x12 P6 double-thread right length 45mm outer diameter 60mm SKU: 64563000](https://maedler.in/product/round-trapezoidal-nut-steel-tr-30x12-p6-double-thread-right-length-45mm-outer-diameter-60mm-sku-64563000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel Tr.24x10 P5 double-thread right length 36mm outer diameter 50mm SKU: 64562400](https://maedler.in/product/round-trapezoidal-nut-steel-tr-24x10-p5-double-thread-right-length-36mm-outer-diameter-50mm-sku-64562400/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel Tr.20x8 P4 double-thread right length 30mm outer diameter 45mm SKU: 64562000](https://maedler.in/product/round-trapezoidal-nut-steel-tr-20x8-p4-double-thread-right-length-30mm-outer-diameter-45mm-sku-64562000/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel Tr.16x8 P4 double-thread right length 24mm outer diameter 36mm SKU: 64561600](https://maedler.in/product/round-trapezoidal-nut-steel-tr-16x8-p4-double-thread-right-length-24mm-outer-diameter-36mm-sku-64561600/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round trapezoidal nut steel Tr. 12x6 P3 double-thread right length 18mm outer diameter 26mm SKU: 64561200](https://maedler.in/product/round-trapezoidal-nut-steel-tr-12x6-p3-double-thread-right-length-18mm-outer-diameter-26mm-sku-64561200/): Material: Steel C35Pb. Tolerance zone 7H. Height = 1,5 x diameter. Attention: Steel nuts get very easily thightened on a spindle made from Steel or stainless steel. This nuts are only for clamping, manual adjustments or as fastening nut. Not suitable for drive systems. - [Round flange trapezoidal nut Tr. 40 x 14 P7 double-thread right hand material red brass SKU: 64544140](https://maedler.in/product/round-flange-trapezoidal-nut-tr-40-x-14-p7-double-thread-right-hand-material-red-brass-sku-64544140/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr. 30 x 12 P6 double-thread right hand material red brass SKU: 64544130](https://maedler.in/product/round-flange-trapezoidal-nut-tr-30-x-12-p6-double-thread-right-hand-material-red-brass-sku-64544130/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr. 24 x 10 P5 double-thread right hand material red brass SKU: 64544124](https://maedler.in/product/round-flange-trapezoidal-nut-tr-24-x-10-p5-double-thread-right-hand-material-red-brass-sku-64544124/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr. 20 x 8 P4 double-thread right hand material red brass SKU: 64544120](https://maedler.in/product/round-flange-trapezoidal-nut-tr-20-x-8-p4-double-thread-right-hand-material-red-brass-sku-64544120/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr. 16 x 8 P4 double-thread right hand material red brass SKU: 64544116](https://maedler.in/product/round-flange-trapezoidal-nut-tr-16-x-8-p4-double-thread-right-hand-material-red-brass-sku-64544116/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Round flange trapezoidal nut Tr. 12 x 6 P3 double-thread right hand material red brass SKU: 64544112](https://maedler.in/product/round-flange-trapezoidal-nut-tr-12-x-6-p3-double-thread-right-hand-material-red-brass-sku-64544112/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Tolerance zone 7H. - [Ready-to install flange nut EFM long Tr.70x10 left hand material red brass SKU: 64477670](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-70x10-left-hand-material-red-brass-sku-64477670/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.60x9 left hand material red brass SKU: 64477660](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-60x9-left-hand-material-red-brass-sku-64477660/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.52x8 left hand material red brass SKU: 64477652](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-52x8-left-hand-material-red-brass-sku-64477652/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.50x8 left hand material red brass SKU: 64477650](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-50x8-left-hand-material-red-brass-sku-64477650/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.48x8 left hand material red brass SKU: 64477648](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-48x8-left-hand-material-red-brass-sku-64477648/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.44x7 left hand material red brass SKU: 64477644](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-44x7-left-hand-material-red-brass-sku-64477644/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.40x7 left hand material red brass SKU: 64477640](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-40x7-left-hand-material-red-brass-sku-64477640/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.36x6 left hand material red brass SKU: 64477636](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-36x6-left-hand-material-red-brass-sku-64477636/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.32x6 left hand material red brass SKU: 64477632](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-32x6-left-hand-material-red-brass-sku-64477632/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.30x6 left hand material red brass SKU: 64477630](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-30x6-left-hand-material-red-brass-sku-64477630/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.28x5 left hand material red brass SKU: 64477628](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-28x5-left-hand-material-red-brass-sku-64477628/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.24x5 left hand material red brass SKU: 64477624](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-24x5-left-hand-material-red-brass-sku-64477624/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.20x4 left hand material red brass SKU: 64477620](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-20x4-left-hand-material-red-brass-sku-64477620/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.18x4 left hand material red brass SKU: 64477618](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-18x4-left-hand-material-red-brass-sku-64477618/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.16x4 left hand material red brass SKU: 64477616](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-16x4-left-hand-material-red-brass-sku-64477616/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.14x4 left hand material red brass SKU: 64477614](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-14x4-left-hand-material-red-brass-sku-64477614/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.12x3 left hand material red brass SKU: 64477612](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-12x3-left-hand-material-red-brass-sku-64477612/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, left handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.70x10 right hand material red brass SKU: 64477570](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-70x10-right-hand-material-red-brass-sku-64477570/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.60x9 right hand material red brass SKU: 64477560](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-60x9-right-hand-material-red-brass-sku-64477560/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.52x8 right hand material red brass SKU: 64477552](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-52x8-right-hand-material-red-brass-sku-64477552/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.50x8 right hand material red brass SKU: 64477550](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-50x8-right-hand-material-red-brass-sku-64477550/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.48x8 right hand material red brass SKU: 64477548](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-48x8-right-hand-material-red-brass-sku-64477548/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.44x7 right hand material red brass SKU: 64477544](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-44x7-right-hand-material-red-brass-sku-64477544/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.40x7 right hand material red brass SKU: 64477540](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-40x7-right-hand-material-red-brass-sku-64477540/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.36x6 right hand material red brass SKU: 64477536](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-36x6-right-hand-material-red-brass-sku-64477536/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.32x6 right hand material red brass SKU: 64477532](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-32x6-right-hand-material-red-brass-sku-64477532/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.30x6 right hand material red brass SKU: 64477530](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-30x6-right-hand-material-red-brass-sku-64477530/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.28x5 right hand material red brass SKU: 64477528](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-28x5-right-hand-material-red-brass-sku-64477528/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.24x5 right hand material red brass SKU: 64477524](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-24x5-right-hand-material-red-brass-sku-64477524/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.20x4 right hand material red brass SKU: 64477520](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-20x4-right-hand-material-red-brass-sku-64477520/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.18x4 right hand material red brass SKU: 64477518](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-18x4-right-hand-material-red-brass-sku-64477518/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.16x4 right hand material red brass SKU: 64477516](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-16x4-right-hand-material-red-brass-sku-64477516/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.14x4 right hand material red brass SKU: 64477514](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-14x4-right-hand-material-red-brass-sku-64477514/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to install flange nut EFM long Tr.12x3 right hand material red brass SKU: 64477512](https://maedler.in/product/ready-to-install-flange-nut-efm-long-tr-12x3-right-hand-material-red-brass-sku-64477512/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts EFM with Metric ISO-Trapezoidal Thread DIN 103, single thread, right handTolerance zone 7H.* Lead angle is not in accordance with DIN 103. - [Ready-to-install flange nut Tr.70 x 10 single-start left material red brass SKU: 64477470](https://maedler.in/product/ready-to-install-flange-nut-tr-70-x-10-single-start-left-material-red-brass-sku-64477470/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.60 x 9 single-start left material red brass SKU: 64477460](https://maedler.in/product/ready-to-install-flange-nut-tr-60-x-9-single-start-left-material-red-brass-sku-64477460/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.50 x 8 single-start left material red brass SKU: 64477450](https://maedler.in/product/ready-to-install-flange-nut-tr-50-x-8-single-start-left-material-red-brass-sku-64477450/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.40 x 7 single-start left material red brass SKU: 64477440](https://maedler.in/product/ready-to-install-flange-nut-tr-40-x-7-single-start-left-material-red-brass-sku-64477440/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.36 x 6 single-start left material red brass SKU: 64477436](https://maedler.in/product/ready-to-install-flange-nut-tr-36-x-6-single-start-left-material-red-brass-sku-64477436/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Ready-to-install flange nut Tr.30 x 6 single-start left material red brass SKU: 64477430](https://maedler.in/product/ready-to-install-flange-nut-tr-30-x-6-single-start-left-material-red-brass-sku-64477430/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-Install Flange Nuts with Metric ISO-Trapezoidal Thread DIN 103, Single-Thread, left handTolerance zone 7H. - [Spur gear made of polyketone die-cast with hub module 1 14 teeth tooth width 9mm outside diameter 16mm SKU: 28301401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-14-teeth-tooth-width-9mm-outside-diameter-16mm-sku-28301401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 14 teeth tooth width 9mm outside diameter 16mm SKU: 28301400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-14-teeth-tooth-width-9mm-outside-diameter-16mm-sku-28301400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 13 teeth tooth width 9mm outside diameter 15mm SKU: 28301301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-13-teeth-tooth-width-9mm-outside-diameter-15mm-sku-28301301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 13 teeth tooth width 9mm outside diameter 15mm SKU: 28301300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-13-teeth-tooth-width-9mm-outside-diameter-15mm-sku-28301300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 12 teeth tooth width 9mm outside diameter 14mm SKU: 28301201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-12-teeth-tooth-width-9mm-outside-diameter-14mm-sku-28301201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 12 teeth tooth width 9mm outside diameter 14mm SKU: 28301200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-12-teeth-tooth-width-9mm-outside-diameter-14mm-sku-28301200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 120 teeth tooth width 6mm outside diameter 85,4mm SKU: 28212001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-120-teeth-tooth-width-6mm-outside-diameter-854mm-sku-28212001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 120 teeth tooth width 6mm outside diameter 85.4mm SKU: 28212000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-120-teeth-tooth-width-6mm-outside-diameter-85-4mm-sku-28212000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 100 teeth tooth width 6mm outside diameter 71,4mm SKU: 28210001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-100-teeth-tooth-width-6mm-outside-diameter-714mm-sku-28210001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 100 teeth tooth width 6mm outside diameter 71.4mm SKU: 28210000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-100-teeth-tooth-width-6mm-outside-diameter-71-4mm-sku-28210000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 96 teeth tooth width 6mm outside diameter 68,6mm SKU: 28209601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-96-teeth-tooth-width-6mm-outside-diameter-686mm-sku-28209601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 96 teeth tooth width 6mm outside diameter 68.6mm SKU: 28209600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-96-teeth-tooth-width-6mm-outside-diameter-68-6mm-sku-28209600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 90 teeth tooth width 6mm outside diameter 64,4mm SKU: 28209001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-90-teeth-tooth-width-6mm-outside-diameter-644mm-sku-28209001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 90 teeth tooth width 6mm outside diameter 64.4mm SKU: 28209000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-90-teeth-tooth-width-6mm-outside-diameter-64-4mm-sku-28209000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 80 teeth tooth width 6mm outside diameter 57,4mm SKU: 28208001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-80-teeth-tooth-width-6mm-outside-diameter-574mm-sku-28208001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 80 teeth tooth width 6mm outside diameter 57.4mm SKU: 28208000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-80-teeth-tooth-width-6mm-outside-diameter-57-4mm-sku-28208000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 75 teeth tooth width 6mm outside diameter 53,9mm SKU: 28207501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-75-teeth-tooth-width-6mm-outside-diameter-539mm-sku-28207501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 75 teeth tooth width 6mm outside diameter 53.9mm SKU: 28207500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-75-teeth-tooth-width-6mm-outside-diameter-53-9mm-sku-28207500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 72 teeth tooth width 6mm outside diameter 51,8mm SKU: 28207201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-72-teeth-tooth-width-6mm-outside-diameter-518mm-sku-28207201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 72 teeth tooth width 6mm outside diameter 51.8mm SKU: 28207200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-72-teeth-tooth-width-6mm-outside-diameter-51-8mm-sku-28207200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 70 teeth tooth width 6mm outside diameter 50,4mm SKU: 28207001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-70-teeth-tooth-width-6mm-outside-diameter-504mm-sku-28207001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 70 teeth tooth width 6mm outside diameter 50.4mm SKU: 28207000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-70-teeth-tooth-width-6mm-outside-diameter-50-4mm-sku-28207000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 65 teeth tooth width 6mm outside diameter 46,9mm SKU: 28206501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-65-teeth-tooth-width-6mm-outside-diameter-469mm-sku-28206501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 65 teeth tooth width 6mm outside diameter 46.9mm SKU: 28206500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-65-teeth-tooth-width-6mm-outside-diameter-46-9mm-sku-28206500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 64 teeth tooth width 6mm outside diameter 46,2mm SKU: 28206401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-64-teeth-tooth-width-6mm-outside-diameter-462mm-sku-28206401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 64 teeth tooth width 6mm outside diameter 46.2mm SKU: 28206400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-64-teeth-tooth-width-6mm-outside-diameter-46-2mm-sku-28206400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 60 teeth tooth width 6mm outside diameter 43,4mm SKU: 28206001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-60-teeth-tooth-width-6mm-outside-diameter-434mm-sku-28206001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 60 teeth tooth width 6mm outside diameter 43.4mm SKU: 28206000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-60-teeth-tooth-width-6mm-outside-diameter-43-4mm-sku-28206000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 56 teeth tooth width 6mm outside diameter 40,6mm SKU: 28205601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-56-teeth-tooth-width-6mm-outside-diameter-406mm-sku-28205601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 56 teeth tooth width 6mm outside diameter 40.6mm SKU: 28205600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-56-teeth-tooth-width-6mm-outside-diameter-40-6mm-sku-28205600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 55 teeth tooth width 6mm outside diameter 39,9mm SKU: 28205501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-55-teeth-tooth-width-6mm-outside-diameter-399mm-sku-28205501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 55 teeth tooth width 6mm outside diameter 39.9mm SKU: 28205500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-55-teeth-tooth-width-6mm-outside-diameter-39-9mm-sku-28205500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 54 teeth tooth width 6mm outside diameter 39,2mm SKU: 28205401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-54-teeth-tooth-width-6mm-outside-diameter-392mm-sku-28205401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 54 teeth tooth width 6mm outside diameter 39.2mm SKU: 28205400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-54-teeth-tooth-width-6mm-outside-diameter-39-2mm-sku-28205400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 52 teeth tooth width 6mm outside diameter 37,8mm SKU: 28205201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-52-teeth-tooth-width-6mm-outside-diameter-378mm-sku-28205201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 52 teeth tooth width 6mm outside diameter 37.8mm SKU: 28205200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-52-teeth-tooth-width-6mm-outside-diameter-37-8mm-sku-28205200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 50 teeth tooth width 6mm outside diameter 36,4mm SKU: 28205001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-50-teeth-tooth-width-6mm-outside-diameter-364mm-sku-28205001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 50 teeth tooth width 6mm outside diameter 36.4mm SKU: 28205000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-50-teeth-tooth-width-6mm-outside-diameter-36-4mm-sku-28205000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 48 teeth tooth width 6mm outside diameter 35mm SKU: 28204801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-48-teeth-tooth-width-6mm-outside-diameter-35mm-sku-28204801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 48 teeth tooth width 6mm outside diameter 35mm SKU: 28204800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-48-teeth-tooth-width-6mm-outside-diameter-35mm-sku-28204800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 45 teeth tooth width 6mm outside diameter 32,9mm SKU: 28204501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-45-teeth-tooth-width-6mm-outside-diameter-329mm-sku-28204501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 45 teeth tooth width 6mm outside diameter 32.9mm SKU: 28204500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-45-teeth-tooth-width-6mm-outside-diameter-32-9mm-sku-28204500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 42 teeth tooth width 6mm outside diameter 30,8mm SKU: 28204201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-42-teeth-tooth-width-6mm-outside-diameter-308mm-sku-28204201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 42 teeth tooth width 6mm outside diameter 30.8mm SKU: 28204200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-42-teeth-tooth-width-6mm-outside-diameter-30-8mm-sku-28204200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 40 teeth tooth width 6mm outside diameter 29,4mm SKU: 28204001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-40-teeth-tooth-width-6mm-outside-diameter-294mm-sku-28204001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 40 teeth tooth width 6mm outside diameter 29.4mm SKU: 28204000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-40-teeth-tooth-width-6mm-outside-diameter-29-4mm-sku-28204000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 38 teeth tooth width 6mm outside diameter 28mm SKU: 28203801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-38-teeth-tooth-width-6mm-outside-diameter-28mm-sku-28203801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 38 teeth tooth width 6mm outside diameter 28mm SKU: 28203800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-38-teeth-tooth-width-6mm-outside-diameter-28mm-sku-28203800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 36 teeth tooth width 6mm outside diameter 26,6mm SKU: 28203601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-36-teeth-tooth-width-6mm-outside-diameter-266mm-sku-28203601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 36 teeth tooth width 6mm outside diameter 26.6mm SKU: 28203600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-36-teeth-tooth-width-6mm-outside-diameter-26-6mm-sku-28203600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 35 teeth tooth width 6mm outside diameter 25,9mm SKU: 28203501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-35-teeth-tooth-width-6mm-outside-diameter-259mm-sku-28203501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 35 teeth tooth width 6mm outside diameter 25.9mm SKU: 28203500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-35-teeth-tooth-width-6mm-outside-diameter-25-9mm-sku-28203500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 32 teeth tooth width 6mm outside diameter 23,8mm SKU: 28203201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-32-teeth-tooth-width-6mm-outside-diameter-238mm-sku-28203201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 32 teeth tooth width 6mm outside diameter 23.8mm SKU: 28203200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-32-teeth-tooth-width-6mm-outside-diameter-23-8mm-sku-28203200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 30 teeth tooth width 6mm outside diameter 22,4mm SKU: 28203001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-30-teeth-tooth-width-6mm-outside-diameter-224mm-sku-28203001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 30 teeth tooth width 6mm outside diameter 22.4mm SKU: 28203000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-30-teeth-tooth-width-6mm-outside-diameter-22-4mm-sku-28203000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 28 teeth tooth width 6mm outside diameter 21mm SKU: 28202801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-28-teeth-tooth-width-6mm-outside-diameter-21mm-sku-28202801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 28 teeth tooth width 6mm outside diameter 21mm SKU: 28202800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-28-teeth-tooth-width-6mm-outside-diameter-21mm-sku-28202800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 27 teeth tooth width 6mm outside diameter 20,3mm SKU: 28202701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-27-teeth-tooth-width-6mm-outside-diameter-203mm-sku-28202701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 27 teeth tooth width 6mm outside diameter 20.3mm SKU: 28202700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-27-teeth-tooth-width-6mm-outside-diameter-20-3mm-sku-28202700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 26 teeth tooth width 6mm outside diameter 19,6mm SKU: 28202601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-26-teeth-tooth-width-6mm-outside-diameter-196mm-sku-28202601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 26 teeth tooth width 6mm outside diameter 19.6mm SKU: 28202600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-26-teeth-tooth-width-6mm-outside-diameter-19-6mm-sku-28202600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 25 teeth tooth width 6mm outside diameter 18,9mm SKU: 28202501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-25-teeth-tooth-width-6mm-outside-diameter-189mm-sku-28202501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 25 teeth tooth width 6mm outside diameter 18.9mm SKU: 28202500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-25-teeth-tooth-width-6mm-outside-diameter-18-9mm-sku-28202500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 24 teeth tooth width 6mm outside diameter 18,2mm SKU: 28202401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-24-teeth-tooth-width-6mm-outside-diameter-182mm-sku-28202401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 24 teeth tooth width 6mm outside diameter 18.2mm SKU: 28202400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-24-teeth-tooth-width-6mm-outside-diameter-18-2mm-sku-28202400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 23 teeth tooth width 6mm outside diameter 17,5mm SKU: 28202301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-23-teeth-tooth-width-6mm-outside-diameter-175mm-sku-28202301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 23 teeth tooth width 6mm outside diameter 17.5mm SKU: 28202300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-23-teeth-tooth-width-6mm-outside-diameter-17-5mm-sku-28202300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 22 teeth tooth width 6mm outside diameter 16,8mm SKU: 28202201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-22-teeth-tooth-width-6mm-outside-diameter-168mm-sku-28202201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 22 teeth tooth width 6mm outside diameter 16.8mm SKU: 28202200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-22-teeth-tooth-width-6mm-outside-diameter-16-8mm-sku-28202200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 21 teeth tooth width 6mm outside diameter 16,1mm SKU: 28202101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-21-teeth-tooth-width-6mm-outside-diameter-161mm-sku-28202101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 21 teeth tooth width 6mm outside diameter 16.1mm SKU: 28202100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-21-teeth-tooth-width-6mm-outside-diameter-16-1mm-sku-28202100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 20 teeth tooth width 6mm outside diameter 15,4mm SKU: 28202001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-20-teeth-tooth-width-6mm-outside-diameter-154mm-sku-28202001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 20 teeth tooth width 6mm outside diameter 15.4mm SKU: 28202000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-20-teeth-tooth-width-6mm-outside-diameter-15-4mm-sku-28202000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 19 teeth tooth width 6mm outside diameter 14,7mm SKU: 28201901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-19-teeth-tooth-width-6mm-outside-diameter-147mm-sku-28201901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 19 teeth tooth width 6mm outside diameter 14.7mm SKU: 28201900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-19-teeth-tooth-width-6mm-outside-diameter-14-7mm-sku-28201900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 18 teeth tooth width 6mm outside diameter 14mm SKU: 28201801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-18-teeth-tooth-width-6mm-outside-diameter-14mm-sku-28201801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 18 teeth tooth width 6mm outside diameter 14mm SKU: 28201800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-18-teeth-tooth-width-6mm-outside-diameter-14mm-sku-28201800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 17 teeth tooth width 6mm outside diameter 13,3mm SKU: 28201701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-17-teeth-tooth-width-6mm-outside-diameter-133mm-sku-28201701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 17 teeth tooth width 6mm outside diameter 13.3mm SKU: 28201700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-17-teeth-tooth-width-6mm-outside-diameter-13-3mm-sku-28201700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 16 teeth tooth width 6mm outside diameter 12,6mm SKU: 28201601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-16-teeth-tooth-width-6mm-outside-diameter-126mm-sku-28201601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 16 teeth tooth width 6mm outside diameter 12.6mm SKU: 28201600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-16-teeth-tooth-width-6mm-outside-diameter-12-6mm-sku-28201600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 15 teeth tooth width 6mm outside diameter 11,9mm SKU: 28201501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-15-teeth-tooth-width-6mm-outside-diameter-119mm-sku-28201501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 15 teeth tooth width 6mm outside diameter 11.9mm SKU: 28201500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-15-teeth-tooth-width-6mm-outside-diameter-11-9mm-sku-28201500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 14 teeth tooth width 6mm outside diameter 11,2mm SKU: 28201401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-14-teeth-tooth-width-6mm-outside-diameter-112mm-sku-28201401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 14 teeth tooth width 6mm outside diameter 11.2mm SKU: 28201400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-14-teeth-tooth-width-6mm-outside-diameter-11-2mm-sku-28201400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 13 teeth tooth width 6mm outside diameter 10,5mm SKU: 28201301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-13-teeth-tooth-width-6mm-outside-diameter-105mm-sku-28201301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 13 teeth tooth width 6mm outside diameter 10.5mm SKU: 28201300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-13-teeth-tooth-width-6mm-outside-diameter-10-5mm-sku-28201300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.7 12 teeth tooth width 6mm outside diameter 9.8mm SKU: 28201201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-7-12-teeth-tooth-width-6mm-outside-diameter-9-8mm-sku-28201201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.7 12 teeth tooth width 6mm outside diameter 9.8mm SKU: 28201200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-7-12-teeth-tooth-width-6mm-outside-diameter-9-8mm-sku-28201200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 120 teeth tooth width 3mm outside diameter 61mm SKU: 28112001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-120-teeth-tooth-width-3mm-outside-diameter-61mm-sku-28112001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 120 teeth tooth width 3mm outside diameter 61mm SKU: 28112000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-120-teeth-tooth-width-3mm-outside-diameter-61mm-sku-28112000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 100 teeth tooth width 3mm outside diameter 51mm SKU: 28110001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-100-teeth-tooth-width-3mm-outside-diameter-51mm-sku-28110001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 100 teeth tooth width 3mm outside diameter 51mm SKU: 28110000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-100-teeth-tooth-width-3mm-outside-diameter-51mm-sku-28110000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 96 teeth tooth width 3mm outside diameter 49mm SKU: 28109601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-96-teeth-tooth-width-3mm-outside-diameter-49mm-sku-28109601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 96 teeth tooth width 3mm outside diameter 49mm SKU: 28109600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-96-teeth-tooth-width-3mm-outside-diameter-49mm-sku-28109600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 90 teeth tooth width 3mm outside diameter 46mm SKU: 28109001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-90-teeth-tooth-width-3mm-outside-diameter-46mm-sku-28109001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 90 teeth tooth width 3mm outside diameter 46mm SKU: 28109000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-90-teeth-tooth-width-3mm-outside-diameter-46mm-sku-28109000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 0.5 80 teeth tooth width 3mm outside diameter 41mm SKU: 28108001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-0-5-80-teeth-tooth-width-3mm-outside-diameter-41mm-sku-28108001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º.Usable also under water or other mediums. Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 0.5 80 teeth tooth width 3mm outside diameter 41mm SKU: 28108000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-0-5-80-teeth-tooth-width-3mm-outside-diameter-41mm-sku-28108000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Linear ball bearing KB-3 ISO series 3 premium with Dichtung for shaft Ø 25mm SKU: 64612500](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-dichtung-for-shaft-o-25mm-sku-64612500/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 20mm SKU: 64612020](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-20mm-sku-64612020/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning open linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 20mm SKU: 64612007](https://maedler.in/product/self-aligning-open-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-20mm-sku-64612007/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. Stainless version on request. - [Self-aligning linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 20mm SKU: 64612006](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-20mm-sku-64612006/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 20mm open design SKU: 64612003](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-20mm-open-design-sku-64612003/): Linear bearings from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 20mm SKU: 64612002](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-20mm-sku-64612002/): Linear bearings from reliable brand in good qquality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-O ISO series 3 premium with double rubber seal for shaft Ø 20mm SKU: 64612001](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-double-rubber-seal-for-shaft-o-20mm-sku-64612001/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with Dichtung for shaft Ø 20mm SKU: 64612000](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-dichtung-for-shaft-o-20mm-sku-64612000/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 16mm SKU: 64611616](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-16mm-sku-64611616/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning open linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 16mm SKU: 64611607](https://maedler.in/product/self-aligning-open-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-16mm-sku-64611607/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. Stainless version on request. - [Self-aligning linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 16mm SKU: 64611606](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-16mm-sku-64611606/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 16mm open design SKU: 64611603](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-16mm-open-design-sku-64611603/): Linear bearings from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 16mm SKU: 64611602](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-16mm-sku-64611602/): Linear bearings from reliable brand in good qquality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-O ISO series 3 premium with double rubber seal for shaft Ø 16mm SKU: 64611601](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-double-rubber-seal-for-shaft-o-16mm-sku-64611601/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with Dichtung for shaft Ø 16mm SKU: 64611600](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-dichtung-for-shaft-o-16mm-sku-64611600/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 14mm SKU: 64611414](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-14mm-sku-64611414/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 12mm SKU: 64611212](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-12mm-sku-64611212/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning open linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 12mm SKU: 64611207](https://maedler.in/product/self-aligning-open-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-12mm-sku-64611207/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. Stainless version on request. - [Self-aligning linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 12mm SKU: 64611206](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-12mm-sku-64611206/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 12mm open design SKU: 64611203](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-12mm-open-design-sku-64611203/): Linear bearings from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 12mm SKU: 64611202](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-12mm-sku-64611202/): Linear bearings from reliable brand in good qquality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-O ISO series 3 premium with double rubber seal for shaft Ø 12mm SKU: 64611201](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-double-rubber-seal-for-shaft-o-12mm-sku-64611201/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with Dichtung for shaft Ø 12mm SKU: 64611200](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-dichtung-for-shaft-o-12mm-sku-64611200/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 10mm SKU: 64611010](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-10mm-sku-64611010/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 8mm SKU: 64610808](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-8mm-sku-64610808/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with Dichtung for shaft Ø 8mm SKU: 64610800](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-dichtung-for-shaft-o-8mm-sku-64610800/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 6mm SKU: 64610606](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-6mm-sku-64610606/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 5mm SKU: 64610505](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-5mm-sku-64610505/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with Dichtung for shaft Ø 5mm SKU: 64610500](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-dichtung-for-shaft-o-5mm-sku-64610500/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 4mm SKU: 64610404](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-4mm-sku-64610404/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 3mm SKU: 64610303](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-3mm-sku-64610303/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 60mm long version SKU: 64606006VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-60mm-long-version-sku-64606006vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 60mm short version SKU: 64606006V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-60mm-short-version-sku-64606006v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 60mm long version SKU: 64606006FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-60mm-long-version-sku-64606006fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 60mm short version SKU: 64606006F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-60mm-short-version-sku-64606006f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 60mm SKU: 64606006](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-60mm-sku-64606006/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 50mm SKU: 64605050](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-50mm-sku-64605050/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-ST-O ISO series 3 sealed on both sides for shaft Ø 50mm SKU: 64605007](https://maedler.in/product/open-linear-ball-bearing-kb-3-st-o-iso-series-3-sealed-on-both-sides-for-shaft-o-50mm-sku-64605007/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our opened units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7.1) At size 25 the fixing hole Ø 3 mm is located below the middle. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 50mm long version SKU: 64605006VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-50mm-long-version-sku-64605006vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 50mm short version SKU: 64605006V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-50mm-short-version-sku-64605006v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 50mm long version SKU: 64605006FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-50mm-long-version-sku-64605006fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 50mm short version SKU: 64605006F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-50mm-short-version-sku-64605006f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 50mm SKU: 64605006](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-50mm-sku-64605006/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Open Linear ball bearing KB-3-O ISO series 3 premium with shields for shaft Ø 50mm SKU: 64605001](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-shields-for-shaft-o-50mm-sku-64605001/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with shields for shaft Ø 50mm SKU: 64605000](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-shields-for-shaft-o-50mm-sku-64605000/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 40mm SKU: 64604040](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-40mm-sku-64604040/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-ST-O ISO series 3 sealed on both sides for shaft Ø 40mm SKU: 64604007](https://maedler.in/product/open-linear-ball-bearing-kb-3-st-o-iso-series-3-sealed-on-both-sides-for-shaft-o-40mm-sku-64604007/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our opened units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7.1) At size 25 the fixing hole Ø 3 mm is located below the middle. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 40mm long version SKU: 64604006VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-40mm-long-version-sku-64604006vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 40mm short version SKU: 64604006V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-40mm-short-version-sku-64604006v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 40mm long version SKU: 64604006FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-40mm-long-version-sku-64604006fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 40mm short version SKU: 64604006F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-40mm-short-version-sku-64604006f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 40mm SKU: 64604006](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-40mm-sku-64604006/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Open Linear ball bearing KB-3-O ISO series 3 premium with shields for shaft Ø 40mm SKU: 64604001](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-shields-for-shaft-o-40mm-sku-64604001/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with shields for shaft Ø 40mm SKU: 64604000](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-shields-for-shaft-o-40mm-sku-64604000/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 30mm SKU: 64603030](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-30mm-sku-64603030/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-ST-O ISO series 3 sealed on both sides for shaft Ø 30mm SKU: 64603007](https://maedler.in/product/open-linear-ball-bearing-kb-3-st-o-iso-series-3-sealed-on-both-sides-for-shaft-o-30mm-sku-64603007/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our opened units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7.1) At size 25 the fixing hole Ø 3 mm is located below the middle. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 30mm long version SKU: 64603006VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-30mm-long-version-sku-64603006vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 30mm short version SKU: 64603006V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-30mm-short-version-sku-64603006v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 30mm long version SKU: 64603006FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-30mm-long-version-sku-64603006fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 30mm short version SKU: 64603006F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-30mm-short-version-sku-64603006f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 30mm SKU: 64603006](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-30mm-sku-64603006/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Open Linear ball bearing KB-3-O ISO series 3 premium with shields for shaft Ø 30mm SKU: 64603001](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-shields-for-shaft-o-30mm-sku-64603001/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with shields for shaft Ø 30mm SKU: 64603000](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-shields-for-shaft-o-30mm-sku-64603000/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 25mm SKU: 64602525](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-25mm-sku-64602525/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-ST-O ISO series 3 sealed on both sides for shaft Ø 25mm SKU: 64602507](https://maedler.in/product/open-linear-ball-bearing-kb-3-st-o-iso-series-3-sealed-on-both-sides-for-shaft-o-25mm-sku-64602507/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our opened units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7.1) At size 25 the fixing hole Ø 3 mm is located below the middle. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 25mm long version SKU: 64602506VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-25mm-long-version-sku-64602506vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 25mm short version SKU: 64602506V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-25mm-short-version-sku-64602506v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 25mm long version SKU: 64602506FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-25mm-long-version-sku-64602506fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 25mm short version SKU: 64602506F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-25mm-short-version-sku-64602506f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 25mm SKU: 64602506](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-25mm-sku-64602506/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Open Linear ball bearing KB-3-O ISO series 3 premium with shields for shaft Ø 25mm SKU: 64602501](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-shields-for-shaft-o-25mm-sku-64602501/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with shields for shaft Ø 25mm SKU: 64602500](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-shields-for-shaft-o-25mm-sku-64602500/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 20mm SKU: 64602020](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-20mm-sku-64602020/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-ST-O ISO series 3 sealed on both sides for shaft Ø 20mm SKU: 64602007](https://maedler.in/product/open-linear-ball-bearing-kb-3-st-o-iso-series-3-sealed-on-both-sides-for-shaft-o-20mm-sku-64602007/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our opened units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7.1) At size 25 the fixing hole Ø 3 mm is located below the middle. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 20mm long version SKU: 64602006VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-20mm-long-version-sku-64602006vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 20mm short version SKU: 64602006V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-20mm-short-version-sku-64602006v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 20mm long version SKU: 64602006FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-20mm-long-version-sku-64602006fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 20mm short version SKU: 64602006F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-20mm-short-version-sku-64602006f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 20mm SKU: 64602006](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-20mm-sku-64602006/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Open Linear ball bearing KB-3-O ISO series 3 premium with shields for shaft Ø 20mm SKU: 64602001](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-shields-for-shaft-o-20mm-sku-64602001/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with shields for shaft Ø 20mm SKU: 64602000](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-shields-for-shaft-o-20mm-sku-64602000/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 16mm SKU: 64601616](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-16mm-sku-64601616/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-ST-O ISO series 3 sealed on both sides for shaft Ø 16mm SKU: 64601607](https://maedler.in/product/open-linear-ball-bearing-kb-3-st-o-iso-series-3-sealed-on-both-sides-for-shaft-o-16mm-sku-64601607/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our opened units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7.1) At size 25 the fixing hole Ø 3 mm is located below the middle. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 16mm long version SKU: 64601606VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-16mm-long-version-sku-64601606vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 16mm short version SKU: 64601606V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-16mm-short-version-sku-64601606v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 16mm long version SKU: 64601606FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-16mm-long-version-sku-64601606fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 16mm short version SKU: 64601606F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-16mm-short-version-sku-64601606f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 16mm SKU: 64601606](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-16mm-sku-64601606/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Open Linear ball bearing KB-3-O ISO series 3 premium with shields for shaft Ø 16mm SKU: 64601601](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-shields-for-shaft-o-16mm-sku-64601601/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with shields for shaft Ø 16mm SKU: 64601600](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-shields-for-shaft-o-16mm-sku-64601600/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 14mm SKU: 64601414](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-14mm-sku-64601414/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with shields for shaft Ø 12mm SKU: 64601212](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-shields-for-shaft-o-12mm-sku-64601212/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-ST-O ISO series 3 sealed on both sides for shaft Ø 12mm SKU: 64601207](https://maedler.in/product/open-linear-ball-bearing-kb-3-st-o-iso-series-3-sealed-on-both-sides-for-shaft-o-12mm-sku-64601207/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our opened units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7.1) At size 25 the fixing hole Ø 3 mm is located below the middle. - [Tandem linear ball bearing KB-ST-VL with square flange sealed on both sides for shaft Ø 12mm long version SKU: 64601206VL](https://maedler.in/product/tandem-linear-ball-bearing-kb-st-vl-with-square-flange-sealed-on-both-sides-for-shaft-o-12mm-long-version-sku-64601206vl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 12mm short version SKU: 64601206V](https://maedler.in/product/linear-ball-bearing-kb-st-v-with-square-flange-sealed-on-both-sides-for-shaft-o-12mm-short-version-sku-64601206v/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 12mm long version SKU: 64601206FL](https://maedler.in/product/tandem-linear-ball-bearing-kbt-st-fl-with-round-flange-sealed-on-both-sides-for-shaft-o-12mm-long-version-sku-64601206fl/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-ST-F with round flange sealed on both sides for shaft Ø 12mm short version SKU: 64601206F](https://maedler.in/product/linear-ball-bearing-kb-st-f-with-round-flange-sealed-on-both-sides-for-shaft-o-12mm-short-version-sku-64601206f/): Material: With Steel jacket. Ball cage from plastic.The linear ball bearings are suitable for screwing onto components. Via the four mounting holes, the linear bearings can be mounted directly e. g. in machines.This ensures easy mounting and interchangeability.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Linear ball bearing KB-3-ST ISO series 3 sealed on both sides for shaft Ø 12mm SKU: 64601206](https://maedler.in/product/linear-ball-bearing-kb-3-st-iso-series-3-sealed-on-both-sides-for-shaft-o-12mm-sku-64601206/): Material: With Steel jacket. Ball cage from plastic.These linear bearings can be fitted inside a customer‘s housing or as spare parts for our closed units ISO Series 3.The bearings are greased at the factory. In order to prevent the ingress of dirt and the leakage of lubricant, the linear ball bearings are sealed on both sides.Recommended shaft tolerance h6, housing tolerance H7. - [Open Linear ball bearing KB-3-O ISO series 3 premium with shields for shaft Ø 12mm SKU: 64601201](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-shields-for-shaft-o-12mm-sku-64601201/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with shields for shaft Ø 12mm SKU: 64601200](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-shields-for-shaft-o-12mm-sku-64601200/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Spur gear made of polyketone die-cast with hub module 1.5 18 teeth tooth width 12mm outside diameter 30mm SKU: 28501801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-18-teeth-tooth-width-12mm-outside-diameter-30mm-sku-28501801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 18 teeth tooth width 12mm outside diameter 30mm SKU: 28501800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-18-teeth-tooth-width-12mm-outside-diameter-30mm-sku-28501800/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 17 teeth tooth width 12mm outside diameter 28,5mm SKU: 28501701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-17-teeth-tooth-width-12mm-outside-diameter-285mm-sku-28501701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 17 teeth tooth width 12mm outside diameter 28.5mm SKU: 28501700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-17-teeth-tooth-width-12mm-outside-diameter-28-5mm-sku-28501700/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 16 teeth tooth width 12mm outside diameter 27mm SKU: 28501601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-16-teeth-tooth-width-12mm-outside-diameter-27mm-sku-28501601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 16 teeth tooth width 12mm outside diameter 27mm SKU: 28501600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-16-teeth-tooth-width-12mm-outside-diameter-27mm-sku-28501600/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 15 teeth tooth width 12mm outside diameter 25,5mm SKU: 28501501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-15-teeth-tooth-width-12mm-outside-diameter-255mm-sku-28501501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 15 teeth tooth width 12mm outside diameter 25.5mm SKU: 28501500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-15-teeth-tooth-width-12mm-outside-diameter-25-5mm-sku-28501500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 14 teeth tooth width 12mm outside diameter 24mm SKU: 28501401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-14-teeth-tooth-width-12mm-outside-diameter-24mm-sku-28501401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 14 teeth tooth width 12mm outside diameter 24mm SKU: 28501400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-14-teeth-tooth-width-12mm-outside-diameter-24mm-sku-28501400/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 13 teeth tooth width 12mm outside diameter 22,5mm SKU: 28501301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-13-teeth-tooth-width-12mm-outside-diameter-225mm-sku-28501301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 13 teeth tooth width 12mm outside diameter 22.5mm SKU: 28501300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-13-teeth-tooth-width-12mm-outside-diameter-22-5mm-sku-28501300/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 12 teeth tooth width 12mm outside diameter 21mm SKU: 28501201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-12-teeth-tooth-width-12mm-outside-diameter-21mm-sku-28501201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 12 teeth tooth width 12mm outside diameter 21mm SKU: 28501200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-12-teeth-tooth-width-12mm-outside-diameter-21mm-sku-28501200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 140 teeth tooth width 9mm outside diameter 142mm SKU: 28314001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-140-teeth-tooth-width-9mm-outside-diameter-142mm-sku-28314001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 140 teeth tooth width 9mm outside diameter 142mm SKU: 28314000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-140-teeth-tooth-width-9mm-outside-diameter-142mm-sku-28314000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 130 teeth tooth width 9mm outside diameter 132mm SKU: 28313001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-130-teeth-tooth-width-9mm-outside-diameter-132mm-sku-28313001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 130 teeth tooth width 9mm outside diameter 132mm SKU: 28313000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-130-teeth-tooth-width-9mm-outside-diameter-132mm-sku-28313000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 120 teeth tooth width 9mm outside diameter 122mm SKU: 28312001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-120-teeth-tooth-width-9mm-outside-diameter-122mm-sku-28312001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 120 teeth tooth width 9mm outside diameter 122mm SKU: 28312000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-120-teeth-tooth-width-9mm-outside-diameter-122mm-sku-28312000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 110 teeth tooth width 9mm outside diameter 112mm SKU: 28311001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-110-teeth-tooth-width-9mm-outside-diameter-112mm-sku-28311001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 110 teeth tooth width 9mm outside diameter 112mm SKU: 28311000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-110-teeth-tooth-width-9mm-outside-diameter-112mm-sku-28311000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 100 teeth tooth width 9mm outside diameter 102mm SKU: 28310001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-100-teeth-tooth-width-9mm-outside-diameter-102mm-sku-28310001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 100 teeth tooth width 9mm outside diameter 102mm SKU: 28310000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-100-teeth-tooth-width-9mm-outside-diameter-102mm-sku-28310000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 90 teeth tooth width 9mm outside diameter 92mm SKU: 28309001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-90-teeth-tooth-width-9mm-outside-diameter-92mm-sku-28309001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 90 teeth tooth width 9mm outside diameter 92mm SKU: 28309000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-90-teeth-tooth-width-9mm-outside-diameter-92mm-sku-28309000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 85 teeth tooth width 9mm outside diameter 87mm SKU: 28308501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-85-teeth-tooth-width-9mm-outside-diameter-87mm-sku-28308501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 85 teeth tooth width 9mm outside diameter 87mm SKU: 28308500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-85-teeth-tooth-width-9mm-outside-diameter-87mm-sku-28308500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 80 teeth tooth width 9mm outside diameter 82mm SKU: 28308001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-80-teeth-tooth-width-9mm-outside-diameter-82mm-sku-28308001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 80 teeth tooth width 9mm outside diameter 82mm SKU: 28308000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-80-teeth-tooth-width-9mm-outside-diameter-82mm-sku-28308000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 75 teeth tooth width 9mm outside diameter 77mm SKU: 28307501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-75-teeth-tooth-width-9mm-outside-diameter-77mm-sku-28307501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 75 teeth tooth width 9mm outside diameter 77mm SKU: 28307500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-75-teeth-tooth-width-9mm-outside-diameter-77mm-sku-28307500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 72 teeth tooth width 9mm outside diameter 74mm SKU: 28307201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-72-teeth-tooth-width-9mm-outside-diameter-74mm-sku-28307201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 72 teeth tooth width 9mm outside diameter 74mm SKU: 28307200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-72-teeth-tooth-width-9mm-outside-diameter-74mm-sku-28307200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 70 teeth tooth width 9mm outside diameter 72mm SKU: 28307001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-70-teeth-tooth-width-9mm-outside-diameter-72mm-sku-28307001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 70 teeth tooth width 9mm outside diameter 72mm SKU: 28307000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-70-teeth-tooth-width-9mm-outside-diameter-72mm-sku-28307000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 65 teeth tooth width 9mm outside diameter 67mm SKU: 28306501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-65-teeth-tooth-width-9mm-outside-diameter-67mm-sku-28306501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 65 teeth tooth width 9mm outside diameter 67mm SKU: 28306500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-65-teeth-tooth-width-9mm-outside-diameter-67mm-sku-28306500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 64 teeth tooth width 9mm outside diameter 66mm SKU: 28306401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-64-teeth-tooth-width-9mm-outside-diameter-66mm-sku-28306401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 64 teeth tooth width 9mm outside diameter 66mm SKU: 28306400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-64-teeth-tooth-width-9mm-outside-diameter-66mm-sku-28306400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 60 teeth tooth width 9mm outside diameter 62mm SKU: 28306001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-60-teeth-tooth-width-9mm-outside-diameter-62mm-sku-28306001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 60 teeth tooth width 9mm outside diameter 62mm SKU: 28306000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-60-teeth-tooth-width-9mm-outside-diameter-62mm-sku-28306000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 58 teeth tooth width 9mm outside diameter 60mm SKU: 28305801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-58-teeth-tooth-width-9mm-outside-diameter-60mm-sku-28305801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 58 teeth tooth width 9mm outside diameter 60mm SKU: 28305800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-58-teeth-tooth-width-9mm-outside-diameter-60mm-sku-28305800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 56 teeth tooth width 9mm outside diameter 58mm SKU: 28305601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-56-teeth-tooth-width-9mm-outside-diameter-58mm-sku-28305601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 56 teeth tooth width 9mm outside diameter 58mm SKU: 28305600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-56-teeth-tooth-width-9mm-outside-diameter-58mm-sku-28305600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 55 teeth tooth width 9mm outside diameter 57mm SKU: 28305501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-55-teeth-tooth-width-9mm-outside-diameter-57mm-sku-28305501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 55 teeth tooth width 9mm outside diameter 57mm SKU: 28305500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-55-teeth-tooth-width-9mm-outside-diameter-57mm-sku-28305500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 54 teeth tooth width 9mm outside diameter 56mm SKU: 28305401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-54-teeth-tooth-width-9mm-outside-diameter-56mm-sku-28305401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 54 teeth tooth width 9mm outside diameter 56mm SKU: 28305400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-54-teeth-tooth-width-9mm-outside-diameter-56mm-sku-28305400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 52 teeth tooth width 9mm outside diameter 54mm SKU: 28305201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-52-teeth-tooth-width-9mm-outside-diameter-54mm-sku-28305201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 52 teeth tooth width 9mm outside diameter 54mm SKU: 28305200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-52-teeth-tooth-width-9mm-outside-diameter-54mm-sku-28305200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 50 teeth tooth width 9mm outside diameter 52mm SKU: 28305001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-50-teeth-tooth-width-9mm-outside-diameter-52mm-sku-28305001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 50 teeth tooth width 9mm outside diameter 52mm SKU: 28305000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-50-teeth-tooth-width-9mm-outside-diameter-52mm-sku-28305000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 48 teeth tooth width 9mm outside diameter 50mm SKU: 28304801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-48-teeth-tooth-width-9mm-outside-diameter-50mm-sku-28304801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 48 teeth tooth width 9mm outside diameter 50mm SKU: 28304800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-48-teeth-tooth-width-9mm-outside-diameter-50mm-sku-28304800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 45 teeth tooth width 9mm outside diameter 47mm SKU: 28304501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-45-teeth-tooth-width-9mm-outside-diameter-47mm-sku-28304501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 45 teeth tooth width 9mm outside diameter 47mm SKU: 28304500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-45-teeth-tooth-width-9mm-outside-diameter-47mm-sku-28304500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 42 teeth tooth width 9mm outside diameter 44mm SKU: 28304201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-42-teeth-tooth-width-9mm-outside-diameter-44mm-sku-28304201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 42 teeth tooth width 9mm outside diameter 44mm SKU: 28304200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-42-teeth-tooth-width-9mm-outside-diameter-44mm-sku-28304200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 40 teeth tooth width 9mm outside diameter 42mm SKU: 28304001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-40-teeth-tooth-width-9mm-outside-diameter-42mm-sku-28304001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 40 teeth tooth width 9mm outside diameter 42mm SKU: 28304000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-40-teeth-tooth-width-9mm-outside-diameter-42mm-sku-28304000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 38 teeth tooth width 9mm outside diameter 40mm SKU: 28303801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-38-teeth-tooth-width-9mm-outside-diameter-40mm-sku-28303801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 38 teeth tooth width 9mm outside diameter 40mm SKU: 28303800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-38-teeth-tooth-width-9mm-outside-diameter-40mm-sku-28303800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 36 teeth tooth width 9mm outside diameter 38mm SKU: 28303601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-36-teeth-tooth-width-9mm-outside-diameter-38mm-sku-28303601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 36 teeth tooth width 9mm outside diameter 38mm SKU: 28303600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-36-teeth-tooth-width-9mm-outside-diameter-38mm-sku-28303600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 35 teeth tooth width 9mm outside diameter 37mm SKU: 28303501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-35-teeth-tooth-width-9mm-outside-diameter-37mm-sku-28303501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 35 teeth tooth width 9mm outside diameter 37mm SKU: 28303500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-35-teeth-tooth-width-9mm-outside-diameter-37mm-sku-28303500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 32 teeth tooth width 9mm outside diameter 34mm SKU: 28303201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-32-teeth-tooth-width-9mm-outside-diameter-34mm-sku-28303201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 32 teeth tooth width 9mm outside diameter 34mm SKU: 28303200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-32-teeth-tooth-width-9mm-outside-diameter-34mm-sku-28303200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 30 teeth tooth width 9mm outside diameter 32mm SKU: 28303001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-30-teeth-tooth-width-9mm-outside-diameter-32mm-sku-28303001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 30 teeth tooth width 9mm outside diameter 32mm SKU: 28303000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-30-teeth-tooth-width-9mm-outside-diameter-32mm-sku-28303000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 28 teeth tooth width 9mm outside diameter 30mm SKU: 28302801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-28-teeth-tooth-width-9mm-outside-diameter-30mm-sku-28302801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 28 teeth tooth width 9mm outside diameter 30mm SKU: 28302800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-28-teeth-tooth-width-9mm-outside-diameter-30mm-sku-28302800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 27 teeth tooth width 9mm outside diameter 29mm SKU: 28302701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-27-teeth-tooth-width-9mm-outside-diameter-29mm-sku-28302701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 27 teeth tooth width 9mm outside diameter 29mm SKU: 28302700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-27-teeth-tooth-width-9mm-outside-diameter-29mm-sku-28302700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 26 teeth tooth width 9mm outside diameter 28mm SKU: 28302601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-26-teeth-tooth-width-9mm-outside-diameter-28mm-sku-28302601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 26 teeth tooth width 9mm outside diameter 28mm SKU: 28302600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-26-teeth-tooth-width-9mm-outside-diameter-28mm-sku-28302600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 25 teeth tooth width 9mm outside diameter 27mm SKU: 28302501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-25-teeth-tooth-width-9mm-outside-diameter-27mm-sku-28302501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 25 teeth tooth width 9mm outside diameter 27mm SKU: 28302500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-25-teeth-tooth-width-9mm-outside-diameter-27mm-sku-28302500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 24 teeth tooth width 9mm outside diameter 26mm SKU: 28302401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-24-teeth-tooth-width-9mm-outside-diameter-26mm-sku-28302401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 24 teeth tooth width 9mm outside diameter 26mm SKU: 28302400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-24-teeth-tooth-width-9mm-outside-diameter-26mm-sku-28302400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 23 teeth tooth width 9mm outside diameter 25mm SKU: 28302301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-23-teeth-tooth-width-9mm-outside-diameter-25mm-sku-28302301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 23 teeth tooth width 9mm outside diameter 25mm SKU: 28302300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-23-teeth-tooth-width-9mm-outside-diameter-25mm-sku-28302300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 22 teeth tooth width 9mm outside diameter 24mm SKU: 28302201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-22-teeth-tooth-width-9mm-outside-diameter-24mm-sku-28302201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 22 teeth tooth width 9mm outside diameter 24mm SKU: 28302200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-22-teeth-tooth-width-9mm-outside-diameter-24mm-sku-28302200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 21 teeth tooth width 9mm outside diameter 23mm SKU: 28302101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-21-teeth-tooth-width-9mm-outside-diameter-23mm-sku-28302101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 21 teeth tooth width 9mm outside diameter 23mm SKU: 28302100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-21-teeth-tooth-width-9mm-outside-diameter-23mm-sku-28302100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 20 teeth tooth width 9mm outside diameter 22mm SKU: 28302001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-20-teeth-tooth-width-9mm-outside-diameter-22mm-sku-28302001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 20 teeth tooth width 9mm outside diameter 22mm SKU: 28302000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-20-teeth-tooth-width-9mm-outside-diameter-22mm-sku-28302000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 19 teeth tooth width 9mm outside diameter 21mm SKU: 28301901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-19-teeth-tooth-width-9mm-outside-diameter-21mm-sku-28301901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 19 teeth tooth width 9mm outside diameter 21mm SKU: 28301900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-19-teeth-tooth-width-9mm-outside-diameter-21mm-sku-28301900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 18 teeth tooth width 9mm outside diameter 20mm SKU: 28301801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-18-teeth-tooth-width-9mm-outside-diameter-20mm-sku-28301801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 18 teeth tooth width 9mm outside diameter 20mm SKU: 28301800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-18-teeth-tooth-width-9mm-outside-diameter-20mm-sku-28301800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 17 teeth tooth width 9mm outside diameter 19mm SKU: 28301701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-17-teeth-tooth-width-9mm-outside-diameter-19mm-sku-28301701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 17 teeth tooth width 9mm outside diameter 19mm SKU: 28301700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-17-teeth-tooth-width-9mm-outside-diameter-19mm-sku-28301700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 16 teeth tooth width 9mm outside diameter 18mm SKU: 28301601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-16-teeth-tooth-width-9mm-outside-diameter-18mm-sku-28301601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 16 teeth tooth width 9mm outside diameter 18mm SKU: 28301600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-16-teeth-tooth-width-9mm-outside-diameter-18mm-sku-28301600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1 15 teeth tooth width 9mm outside diameter 17mm SKU: 28301501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-15-teeth-tooth-width-9mm-outside-diameter-17mm-sku-28301501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1 15 teeth tooth width 9mm outside diameter 17mm SKU: 28301500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-15-teeth-tooth-width-9mm-outside-diameter-17mm-sku-28301500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Shaft block GWLE for shaft diameter 16mm SKU: 64640716](https://maedler.in/product/shaft-block-gwle-for-shaft-diameter-16mm-sku-64640716/): Material: Extruded Aluminium. Clamp screw strength 8.8, Steel zinc-plated. Universel use shaft blocks, e.g. for fastening of guide shafts. - [Shaft block GWLE for shaft diameter 12mm SKU: 64640712](https://maedler.in/product/shaft-block-gwle-for-shaft-diameter-12mm-sku-64640712/): Material: Extruded Aluminium. Clamp screw strength 8.8, Steel zinc-plated. Universel use shaft blocks, e.g. for fastening of guide shafts. - [Shaft block GWLE for shaft diameter 8mm SKU: 64640708](https://maedler.in/product/shaft-block-gwle-for-shaft-diameter-8mm-sku-64640708/): Material: Extruded Aluminium. Clamp screw strength 8.8, Steel zinc-plated. Universel use shaft blocks, e.g. for fastening of guide shafts. - [Shaft block GWL for shaft diameter 50mm SKU: 64640650](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-50mm-sku-64640650/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Shaft block GWL for shaft diameter 40mm SKU: 64640640](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-40mm-sku-64640640/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Shaft block GWL for shaft diameter 30mm SKU: 64640630](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-30mm-sku-64640630/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Shaft block GWL for shaft diameter 25mm SKU: 64640625](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-25mm-sku-64640625/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Shaft block GWL for shaft diameter 20mm SKU: 64640620](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-20mm-sku-64640620/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Shaft block GWL for shaft diameter 16mm SKU: 64640616](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-16mm-sku-64640616/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Shaft block GWL for shaft diameter 14mm SKU: 64640614](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-14mm-sku-64640614/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Shaft block GWL for shaft diameter 12mm SKU: 64640612](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-12mm-sku-64640612/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Shaft block GWL for shaft diameter 10mm SKU: 64640610](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-10mm-sku-64640610/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Shaft block GWL for shaft diameter 8mm SKU: 64640608](https://maedler.in/product/shaft-block-gwl-for-shaft-diameter-8mm-sku-64640608/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for connection of guide shafts. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 6mm SKU: 64640606](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-6mm-sku-64640606/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Flange shaft block GWFL for shaft diameter 50mm SKU: 64640550](https://maedler.in/product/flange-shaft-block-gwfl-for-shaft-diameter-50mm-sku-64640550/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWFL for shaft diameter 40mm SKU: 64640540](https://maedler.in/product/flange-shaft-block-gwfl-for-shaft-diameter-40mm-sku-64640540/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWFL for shaft diameter 30mm SKU: 64640530](https://maedler.in/product/flange-shaft-block-gwfl-for-shaft-diameter-30mm-sku-64640530/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWFL for shaft diameter 25mm SKU: 64640525](https://maedler.in/product/flange-shaft-block-gwfl-for-shaft-diameter-25mm-sku-64640525/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWFL for shaft diameter 20mm SKU: 64640520](https://maedler.in/product/flange-shaft-block-gwfl-for-shaft-diameter-20mm-sku-64640520/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWFL for shaft diameter 16mm SKU: 64640516](https://maedler.in/product/flange-shaft-block-gwfl-for-shaft-diameter-16mm-sku-64640516/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWFL for shaft diameter 14mm SKU: 64640514](https://maedler.in/product/flange-shaft-block-gwfl-for-shaft-diameter-14mm-sku-64640514/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWFL for shaft diameter 12mm SKU: 64640512](https://maedler.in/product/flange-shaft-block-gwfl-for-shaft-diameter-12mm-sku-64640512/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWFL for shaft diameter 10mm SKU: 64640510](https://maedler.in/product/flange-shaft-block-gwfl-for-shaft-diameter-10mm-sku-64640510/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Quadro linear bearing unit KGQ-1 ISO series 1 premium with double rubber seal for shaft diameter 50mm SKU: 64640450](https://maedler.in/product/quadro-linear-bearing-unit-kgq-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-50mm-sku-64640450/): Material: Housing made from extruded aluminium with four compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-1 ISO series 1 premium with double rubber seal for shaft diameter 40mm SKU: 64640440](https://maedler.in/product/quadro-linear-bearing-unit-kgq-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-40mm-sku-64640440/): Material: Housing made from extruded aluminium with four compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-1 ISO series 1 premium with double rubber seal for shaft diameter 30mm SKU: 64640430](https://maedler.in/product/quadro-linear-bearing-unit-kgq-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-30mm-sku-64640430/): Material: Housing made from extruded aluminium with four compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-1 ISO series 1 premium with double rubber seal for shaft diameter 25mm SKU: 64640425](https://maedler.in/product/quadro-linear-bearing-unit-kgq-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-25mm-sku-64640425/): Material: Housing made from extruded aluminium with four compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-1 ISO series 1 premium with double rubber seal for shaft diameter 20mm SKU: 64640420](https://maedler.in/product/quadro-linear-bearing-unit-kgq-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-20mm-sku-64640420/): Material: Housing made from extruded aluminium with four compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-1 ISO series 1 premium with double rubber seal for shaft diameter 16mm SKU: 64640416](https://maedler.in/product/quadro-linear-bearing-unit-kgq-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-16mm-sku-64640416/): Material: Housing made from extruded aluminium with four compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-1 ISO series 1 premium with double rubber seal for shaft diameter 12mm SKU: 64640412](https://maedler.in/product/quadro-linear-bearing-unit-kgq-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-12mm-sku-64640412/): Material: Housing made from extruded aluminium with four compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-1 ISO series 1 premium with double rubber seal for shaft diameter 50mm SKU: 64640350](https://maedler.in/product/tandem-linear-bearing-unit-kgt-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-50mm-sku-64640350/): Material: Housing made from extruded aluminium with two compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-1 ISO series 1 premium with double rubber seal for shaft diameter 40mm SKU: 64640340](https://maedler.in/product/tandem-linear-bearing-unit-kgt-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-40mm-sku-64640340/): Material: Housing made from extruded aluminium with two compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-1 ISO series 1 premium with double rubber seal for shaft diameter 30mm SKU: 64640330](https://maedler.in/product/tandem-linear-bearing-unit-kgt-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-30mm-sku-64640330/): Material: Housing made from extruded aluminium with two compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-1 ISO series 1 premium with double rubber seal for shaft diameter 25mm SKU: 64640325](https://maedler.in/product/tandem-linear-bearing-unit-kgt-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-25mm-sku-64640325/): Material: Housing made from extruded aluminium with two compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-1 ISO series 1 premium with double rubber seal for shaft diameter 20mm SKU: 64640320](https://maedler.in/product/tandem-linear-bearing-unit-kgt-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-20mm-sku-64640320/): Material: Housing made from extruded aluminium with two compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-1 ISO series 1 premium with double rubber seal for shaft diameter 16mm SKU: 64640316](https://maedler.in/product/tandem-linear-bearing-unit-kgt-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-16mm-sku-64640316/): Material: Housing made from extruded aluminium with two compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-1 ISO series 1 premium with double rubber seal for shaft diameter 12mm SKU: 64640312](https://maedler.in/product/tandem-linear-bearing-unit-kgt-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-12mm-sku-64640312/): Material: Housing made from extruded aluminium with two compact linear bearings of the ISO Series 1 from premium brand in top quality, with integral double-lip seals. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. - [Double shaft block GWD-1 ISO series 1 for shaft diameter 50mm SKU: 64640250](https://maedler.in/product/double-shaft-block-gwd-1-iso-series-1-for-shaft-diameter-50mm-sku-64640250/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-1 of the ISO Series 1. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Double shaft block GWD-1 ISO series 1 for shaft diameter 40mm SKU: 64640240](https://maedler.in/product/double-shaft-block-gwd-1-iso-series-1-for-shaft-diameter-40mm-sku-64640240/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-1 of the ISO Series 1. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Double shaft block GWD-1 ISO series 1 for shaft diameter 30mm SKU: 64640230](https://maedler.in/product/double-shaft-block-gwd-1-iso-series-1-for-shaft-diameter-30mm-sku-64640230/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-1 of the ISO Series 1. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Double shaft block GWD-1 ISO series 1 for shaft diameter 25mm SKU: 64640225](https://maedler.in/product/double-shaft-block-gwd-1-iso-series-1-for-shaft-diameter-25mm-sku-64640225/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-1 of the ISO Series 1. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Double shaft block GWD-1 ISO series 1 for shaft diameter 20mm SKU: 64640220](https://maedler.in/product/double-shaft-block-gwd-1-iso-series-1-for-shaft-diameter-20mm-sku-64640220/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-1 of the ISO Series 1. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Double shaft block GWD-1 ISO series 1 for shaft diameter 16mm SKU: 64640216](https://maedler.in/product/double-shaft-block-gwd-1-iso-series-1-for-shaft-diameter-16mm-sku-64640216/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-1 of the ISO Series 1. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Double shaft block GWD-1 ISO series 1 for shaft diameter 12mm SKU: 64640212](https://maedler.in/product/double-shaft-block-gwd-1-iso-series-1-for-shaft-diameter-12mm-sku-64640212/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-1 of the ISO Series 1. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Flange shaft block GWF for shaft diameter 50mm SKU: 64640150](https://maedler.in/product/flange-shaft-block-gwf-for-shaft-diameter-50mm-sku-64640150/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWF for shaft diameter 40mm SKU: 64640140](https://maedler.in/product/flange-shaft-block-gwf-for-shaft-diameter-40mm-sku-64640140/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWF for shaft diameter 30mm SKU: 64640130](https://maedler.in/product/flange-shaft-block-gwf-for-shaft-diameter-30mm-sku-64640130/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWF for shaft diameter 25mm SKU: 64640125](https://maedler.in/product/flange-shaft-block-gwf-for-shaft-diameter-25mm-sku-64640125/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWF for shaft diameter 20mm SKU: 64640120](https://maedler.in/product/flange-shaft-block-gwf-for-shaft-diameter-20mm-sku-64640120/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWF for shaft diameter 16m SKU: 64640116](https://maedler.in/product/flange-shaft-block-gwf-for-shaft-diameter-16m-sku-64640116/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Flange shaft block GWF for shaft diameter 12mm SKU: 64640112](https://maedler.in/product/flange-shaft-block-gwf-for-shaft-diameter-12mm-sku-64640112/): Material: Extruded aluminium. Clamp screw DIN 912, steel, strength 8.8, zinc-plated. Universal use shaft blocks, e.g. for flange connection of guide shafts. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 50mm SKU: 64635050](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-50mm-sku-64635050/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 40mm SKU: 64634040](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-40mm-sku-64634040/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 30mm SKU: 64633030](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-30mm-sku-64633030/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 25mm SKU: 64632525](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-25mm-sku-64632525/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 20mm SKU: 64632020](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-20mm-sku-64632020/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 16mm SKU: 64631616](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-16mm-sku-64631616/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 14mm SKU: 64631414](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-14mm-sku-64631414/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 12mm SKU: 64631212](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-12mm-sku-64631212/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 10mm SKU: 64631010](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-10mm-sku-64631010/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 8mm SKU: 64630808](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-8mm-sku-64630808/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket with seals for shaft Ø 6mm SKU: 64630606](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-with-seals-for-shaft-o-6mm-sku-64630606/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. With wiping double-lip seals.These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 50mm SKU: 64625050](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-50mm-sku-64625050/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 40mm SKU: 64624040](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-40mm-sku-64624040/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 30mm SKU: 64623030](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-30mm-sku-64623030/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 25mm SKU: 64622525](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-25mm-sku-64622525/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 20mm SKU: 64622020](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-20mm-sku-64622020/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 16mm SKU: 64621616](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-16mm-sku-64621616/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 14mm SKU: 64621414](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-14mm-sku-64621414/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 12mm SKU: 64621212](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-12mm-sku-64621212/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 10mm SKU: 64621010](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-10mm-sku-64621010/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 8mm SKU: 64620808](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-8mm-sku-64620808/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-1-ST ISO series 1 with steel jacket without seals for shaft Ø 6mm SKU: 64620606](https://maedler.in/product/linear-bearing-kb-1-st-iso-series-1-with-steel-jacket-without-seals-for-shaft-o-6mm-sku-64620606/): Linear bearings ISO Series 1 in high quality. With steel jacket. Ball cage from plastic. These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed units ISO Series 1. Without seals, for easy running. These bearings are self-aligning up to +/- 0,5°. All bearings must be lubricated before use.Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 50mm SKU: 64615050](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-50mm-sku-64615050/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 50mm open design SKU: 64615007](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-50mm-open-design-sku-64615007/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. Stainless version on request. - [Self-aligning linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 50mm SKU: 64615006](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-50mm-sku-64615006/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 50mm open design SKU: 64615003](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-50mm-open-design-sku-64615003/): Linear bearings from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 50mm SKU: 64615002](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-50mm-sku-64615002/): Linear bearings from reliable brand in good qquality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-O ISO series 3 premium with double rubber seal for shaft Ø 50mm SKU: 64615001](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-double-rubber-seal-for-shaft-o-50mm-sku-64615001/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with Dichtung for shaft Ø 50mm SKU: 64615000](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-dichtung-for-shaft-o-50mm-sku-64615000/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 40mm SKU: 64614040](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-40mm-sku-64614040/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning open linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 40mm SKU: 64614007](https://maedler.in/product/self-aligning-open-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-40mm-sku-64614007/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. Stainless version on request. - [Self-aligning linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 40mm SKU: 64614006](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-40mm-sku-64614006/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 40mm open design SKU: 64614003](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-40mm-open-design-sku-64614003/): Linear bearings from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 40mm SKU: 64614002](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-40mm-sku-64614002/): Linear bearings from reliable brand in good qquality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-O ISO series 3 premium with double rubber seal for shaft Ø 40mm SKU: 64614001](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-double-rubber-seal-for-shaft-o-40mm-sku-64614001/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with Dichtung for shaft Ø 40mm SKU: 64614000](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-dichtung-for-shaft-o-40mm-sku-64614000/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 30mm SKU: 64613030](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-30mm-sku-64613030/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning open linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 30mm SKU: 64613007](https://maedler.in/product/self-aligning-open-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-30mm-sku-64613007/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. Stainless version on request. - [Self-aligning linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 30mm SKU: 64613006](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-30mm-sku-64613006/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 30mm open design SKU: 64613003](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-30mm-open-design-sku-64613003/): Linear bearings from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 30mm SKU: 64613002](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-30mm-sku-64613002/): Linear bearings from reliable brand in good qquality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-O ISO series 3 premium with double rubber seal for shaft Ø 30mm SKU: 64613001](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-double-rubber-seal-for-shaft-o-30mm-sku-64613001/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium with Dichtung for shaft Ø 30mm SKU: 64613000](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-with-dichtung-for-shaft-o-30mm-sku-64613000/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-1 ISO series 1 premium with double rubber seal for shaft diameter 25mm SKU: 64612525](https://maedler.in/product/linear-ball-bearing-kb-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-25mm-sku-64612525/): KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning open linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 25mm SKU: 64612507](https://maedler.in/product/self-aligning-open-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-25mm-sku-64612507/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. Stainless version on request. - [Self-aligning linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 25mm SKU: 64612506](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-with-seals-for-shaft-o-25mm-sku-64612506/): Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 25mm open design SKU: 64612503](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-25mm-open-design-sku-64612503/): Linear bearings from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 25mm SKU: 64612502](https://maedler.in/product/linear-bearing-kb-3-iso-series-3-easy-line-with-seals-for-shaft-o-25mm-sku-64612502/): Linear bearings from reliable brand in good qquality. Our Easy-Line bushes with swimming seals are very light running.These linear bearings can be fitted inside a customer´s housing or as spare parts for our closed Easy-Line units.With wiping lip seals. These bearings are self-aligning up to +/- 0,5°.All bearings must be lubricated before use. Recommended shaft tolerance h6, housing tolerance H6. - [Open Linear ball bearing KB-3-O ISO series 3 premium with double rubber seal for shaft Ø 25mm SKU: 64612501](https://maedler.in/product/open-linear-ball-bearing-kb-3-o-iso-series-3-premium-with-double-rubber-seal-for-shaft-o-25mm-sku-64612501/): KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. Lubricated, ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Spur gear made of polyketone die-cast with hub module 2 28 teeth tooth width 15mm outside diameter 60mm SKU: 28602801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-28-teeth-tooth-width-15mm-outside-diameter-60mm-sku-28602801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 28 teeth tooth width 15mm outside diameter 60mm SKU: 28602800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-28-teeth-tooth-width-15mm-outside-diameter-60mm-sku-28602800/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 27 teeth tooth width 15mm outside diameter 58mm SKU: 28602701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-27-teeth-tooth-width-15mm-outside-diameter-58mm-sku-28602701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 27 teeth tooth width 15mm outside diameter 58mm SKU: 28602700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-27-teeth-tooth-width-15mm-outside-diameter-58mm-sku-28602700/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 26 teeth tooth width 15mm outside diameter 56mm SKU: 28602601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-26-teeth-tooth-width-15mm-outside-diameter-56mm-sku-28602601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 26 teeth tooth width 15mm outside diameter 56mm SKU: 28602600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-26-teeth-tooth-width-15mm-outside-diameter-56mm-sku-28602600/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 25 teeth tooth width 15mm outside diameter 54mm SKU: 28602501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-25-teeth-tooth-width-15mm-outside-diameter-54mm-sku-28602501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 25 teeth tooth width 15mm outside diameter 54mm SKU: 28602500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-25-teeth-tooth-width-15mm-outside-diameter-54mm-sku-28602500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 24 teeth tooth width 15mm outside diameter 52mm SKU: 28602401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-24-teeth-tooth-width-15mm-outside-diameter-52mm-sku-28602401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 24 teeth tooth width 15mm outside diameter 52mm SKU: 28602400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-24-teeth-tooth-width-15mm-outside-diameter-52mm-sku-28602400/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 23 teeth tooth width 15mm outside diameter 50mm SKU: 28602301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-23-teeth-tooth-width-15mm-outside-diameter-50mm-sku-28602301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 23 teeth tooth width 15mm outside diameter 50mm SKU: 28602300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-23-teeth-tooth-width-15mm-outside-diameter-50mm-sku-28602300/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 22 teeth tooth width 15mm outside diameter 48mm SKU: 28602201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-22-teeth-tooth-width-15mm-outside-diameter-48mm-sku-28602201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 22 teeth tooth width 15mm outside diameter 48mm SKU: 28602200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-22-teeth-tooth-width-15mm-outside-diameter-48mm-sku-28602200/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 21 teeth tooth width 15mm outside diameter 46mm SKU: 28602101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-21-teeth-tooth-width-15mm-outside-diameter-46mm-sku-28602101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 21 teeth tooth width 15mm outside diameter 46mm SKU: 28602100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-21-teeth-tooth-width-15mm-outside-diameter-46mm-sku-28602100/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 20 teeth tooth width 15mm outside diameter 44mm SKU: 28602001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-20-teeth-tooth-width-15mm-outside-diameter-44mm-sku-28602001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 20 teeth tooth width 15mm outside diameter 44mm SKU: 28602000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-20-teeth-tooth-width-15mm-outside-diameter-44mm-sku-28602000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 19 teeth tooth width 15mm outside diameter 42mm SKU: 28601901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-19-teeth-tooth-width-15mm-outside-diameter-42mm-sku-28601901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 19 teeth tooth width 15mm outside diameter 42mm SKU: 28601900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-19-teeth-tooth-width-15mm-outside-diameter-42mm-sku-28601900/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 18 teeth tooth width 15mm outside diameter 40mm SKU: 28601801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-18-teeth-tooth-width-15mm-outside-diameter-40mm-sku-28601801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 18 teeth tooth width 15mm outside diameter 40mm SKU: 28601800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-18-teeth-tooth-width-15mm-outside-diameter-40mm-sku-28601800/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 17 teeth tooth width 15mm outside diameter 38mm SKU: 28601701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-17-teeth-tooth-width-15mm-outside-diameter-38mm-sku-28601701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 17 teeth tooth width 15mm outside diameter 38mm SKU: 28601700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-17-teeth-tooth-width-15mm-outside-diameter-38mm-sku-28601700/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 16 teeth tooth width 15mm outside diameter 36mm SKU: 28601601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-16-teeth-tooth-width-15mm-outside-diameter-36mm-sku-28601601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 16 teeth tooth width 15mm outside diameter 36mm SKU: 28601600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-16-teeth-tooth-width-15mm-outside-diameter-36mm-sku-28601600/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 15 teeth tooth width 15mm outside diameter 34mm SKU: 28601501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-15-teeth-tooth-width-15mm-outside-diameter-34mm-sku-28601501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 15 teeth tooth width 15mm outside diameter 34mm SKU: 28601500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-15-teeth-tooth-width-15mm-outside-diameter-34mm-sku-28601500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 14 teeth tooth width 15mm outside diameter 32mm SKU: 28601401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-14-teeth-tooth-width-15mm-outside-diameter-32mm-sku-28601401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 14 teeth tooth width 15mm outside diameter 32mm SKU: 28601400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-14-teeth-tooth-width-15mm-outside-diameter-32mm-sku-28601400/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 13 teeth tooth width 15mm outside diameter 30mm SKU: 28601301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-13-teeth-tooth-width-15mm-outside-diameter-30mm-sku-28601301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 13 teeth tooth width 15mm outside diameter 30mm SKU: 28601300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-13-teeth-tooth-width-15mm-outside-diameter-30mm-sku-28601300/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 12 teeth tooth width 15mm outside diameter 28mm SKU: 28601201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-12-teeth-tooth-width-15mm-outside-diameter-28mm-sku-28601201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 12 teeth tooth width 15mm outside diameter 28mm SKU: 28601200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-12-teeth-tooth-width-15mm-outside-diameter-28mm-sku-28601200/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 150 teeth tooth width 19mm outside diameter 228mm SKU: 28515001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-150-teeth-tooth-width-19mm-outside-diameter-228mm-sku-28515001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 150 teeth tooth width 19mm outside diameter 228mm SKU: 28515000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-150-teeth-tooth-width-19mm-outside-diameter-228mm-sku-28515000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 140 teeth tooth width 19mm outside diameter 213mm SKU: 28514001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-140-teeth-tooth-width-19mm-outside-diameter-213mm-sku-28514001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 140 teeth tooth width 19mm outside diameter 213mm SKU: 28514000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-140-teeth-tooth-width-19mm-outside-diameter-213mm-sku-28514000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 130 teeth tooth width 19mm outside diameter 198mm SKU: 28513001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-130-teeth-tooth-width-19mm-outside-diameter-198mm-sku-28513001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 130 teeth tooth width 19mm outside diameter 198mm SKU: 28513000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-130-teeth-tooth-width-19mm-outside-diameter-198mm-sku-28513000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 120 teeth tooth width 19mm outside diameter 183mm SKU: 28512001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-120-teeth-tooth-width-19mm-outside-diameter-183mm-sku-28512001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 120 teeth tooth width 19mm outside diameter 183mm SKU: 28512000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-120-teeth-tooth-width-19mm-outside-diameter-183mm-sku-28512000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 110 teeth tooth width 19mm outside diameter 168mm SKU: 28511001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-110-teeth-tooth-width-19mm-outside-diameter-168mm-sku-28511001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 110 teeth tooth width 19mm outside diameter 168mm SKU: 28511000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-110-teeth-tooth-width-19mm-outside-diameter-168mm-sku-28511000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 100 teeth tooth width 19mm outside diameter 153mm SKU: 28510001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-100-teeth-tooth-width-19mm-outside-diameter-153mm-sku-28510001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 100 teeth tooth width 19mm outside diameter 153mm SKU: 28510000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-100-teeth-tooth-width-19mm-outside-diameter-153mm-sku-28510000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 90 teeth tooth width 12mm outside diameter 138mm SKU: 28509001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-90-teeth-tooth-width-12mm-outside-diameter-138mm-sku-28509001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 90 teeth tooth width 12mm outside diameter 138mm SKU: 28509000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-90-teeth-tooth-width-12mm-outside-diameter-138mm-sku-28509000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 80 teeth tooth width 12mm outside diameter 123mm SKU: 28508001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-80-teeth-tooth-width-12mm-outside-diameter-123mm-sku-28508001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 80 teeth tooth width 12mm outside diameter 123mm SKU: 28508000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-80-teeth-tooth-width-12mm-outside-diameter-123mm-sku-28508000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 70 teeth tooth width 12mm outside diameter 108mm SKU: 28507001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-70-teeth-tooth-width-12mm-outside-diameter-108mm-sku-28507001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 70 teeth tooth width 12mm outside diameter 108mm SKU: 28507000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-70-teeth-tooth-width-12mm-outside-diameter-108mm-sku-28507000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 60 teeth tooth width 12mm outside diameter 93mm SKU: 28506001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-60-teeth-tooth-width-12mm-outside-diameter-93mm-sku-28506001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 60 teeth tooth width 12mm outside diameter 93mm SKU: 28506000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-60-teeth-tooth-width-12mm-outside-diameter-93mm-sku-28506000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 55 teeth tooth width 12mm outside diameter 85,5mm SKU: 28505501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-55-teeth-tooth-width-12mm-outside-diameter-855mm-sku-28505501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 55 teeth tooth width 12mm outside diameter 85.5mm SKU: 28505500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-55-teeth-tooth-width-12mm-outside-diameter-85-5mm-sku-28505500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 54 teeth tooth width 12mm outside diameter 84mm SKU: 28505401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-54-teeth-tooth-width-12mm-outside-diameter-84mm-sku-28505401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 54 teeth tooth width 12mm outside diameter 84mm SKU: 28505400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-54-teeth-tooth-width-12mm-outside-diameter-84mm-sku-28505400/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 52 teeth tooth width 12mm outside diameter 81mm SKU: 28505201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-52-teeth-tooth-width-12mm-outside-diameter-81mm-sku-28505201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 52 teeth tooth width 12mm outside diameter 81mm SKU: 28505200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-52-teeth-tooth-width-12mm-outside-diameter-81mm-sku-28505200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 48 teeth tooth width 12mm outside diameter 75mm SKU: 28505001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-48-teeth-tooth-width-12mm-outside-diameter-75mm-sku-28505001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 50 teeth tooth width 12mm outside diameter 78mm SKU: 28505000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-50-teeth-tooth-width-12mm-outside-diameter-78mm-sku-28505000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 48 teeth tooth width 12mm outside diameter 75mm SKU: 28504801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-48-teeth-tooth-width-12mm-outside-diameter-75mm-sku-28504801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 48 teeth tooth width 12mm outside diameter 75mm SKU: 28504800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-48-teeth-tooth-width-12mm-outside-diameter-75mm-sku-28504800/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 45 teeth tooth width 12mm outside diameter 70,5mm SKU: 28504501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-45-teeth-tooth-width-12mm-outside-diameter-705mm-sku-28504501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 45 teeth tooth width 12mm outside diameter 70.5mm SKU: 28504500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-45-teeth-tooth-width-12mm-outside-diameter-70-5mm-sku-28504500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 42 teeth tooth width 12mm outside diameter 66mm SKU: 28504201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-42-teeth-tooth-width-12mm-outside-diameter-66mm-sku-28504201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 42 teeth tooth width 12mm outside diameter 66mm SKU: 28504200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-42-teeth-tooth-width-12mm-outside-diameter-66mm-sku-28504200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 40 teeth tooth width 12mm outside diameter 63mm SKU: 28504001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-40-teeth-tooth-width-12mm-outside-diameter-63mm-sku-28504001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 40 teeth tooth width 12mm outside diameter 63mm SKU: 28504000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-40-teeth-tooth-width-12mm-outside-diameter-63mm-sku-28504000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 38 teeth tooth width 12mm outside diameter 60mm SKU: 28503801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-38-teeth-tooth-width-12mm-outside-diameter-60mm-sku-28503801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 38 teeth tooth width 12mm outside diameter 60mm SKU: 28503800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-38-teeth-tooth-width-12mm-outside-diameter-60mm-sku-28503800/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 36 teeth tooth width 12mm outside diameter 57mm SKU: 28503601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-36-teeth-tooth-width-12mm-outside-diameter-57mm-sku-28503601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 36 teeth tooth width 12mm outside diameter 57mm SKU: 28503600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-36-teeth-tooth-width-12mm-outside-diameter-57mm-sku-28503600/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 35 teeth tooth width 12mm outside diameter 55,5mm SKU: 28503501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-35-teeth-tooth-width-12mm-outside-diameter-555mm-sku-28503501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 35 teeth tooth width 12mm outside diameter 55.5mm SKU: 28503500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-35-teeth-tooth-width-12mm-outside-diameter-55-5mm-sku-28503500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 32 teeth tooth width 12mm outside diameter 51mm SKU: 28503201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-32-teeth-tooth-width-12mm-outside-diameter-51mm-sku-28503201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 32 teeth tooth width 12mm outside diameter 51mm SKU: 28503200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-32-teeth-tooth-width-12mm-outside-diameter-51mm-sku-28503200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 30 teeth tooth width 12mm outside diameter 48mm SKU: 28503001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-30-teeth-tooth-width-12mm-outside-diameter-48mm-sku-28503001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 30 teeth tooth width 12mm outside diameter 48mm SKU: 28503000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-30-teeth-tooth-width-12mm-outside-diameter-48mm-sku-28503000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 28 teeth tooth width 12mm outside diameter 45mm SKU: 28502801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-28-teeth-tooth-width-12mm-outside-diameter-45mm-sku-28502801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 28 teeth tooth width 12mm outside diameter 45mm SKU: 28502800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-28-teeth-tooth-width-12mm-outside-diameter-45mm-sku-28502800/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 27 teeth tooth width 12mm outside diameter 43,5mm SKU: 28502701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-27-teeth-tooth-width-12mm-outside-diameter-435mm-sku-28502701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 27 teeth tooth width 12mm outside diameter 43.5mm SKU: 28502700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-27-teeth-tooth-width-12mm-outside-diameter-43-5mm-sku-28502700/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 26 teeth tooth width 12mm outside diameter 42mm SKU: 28502601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-26-teeth-tooth-width-12mm-outside-diameter-42mm-sku-28502601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 26 teeth tooth width 12mm outside diameter 42mm SKU: 28502600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-26-teeth-tooth-width-12mm-outside-diameter-42mm-sku-28502600/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 25 teeth tooth width 12mm outside diameter 40,5mm SKU: 28502501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-25-teeth-tooth-width-12mm-outside-diameter-405mm-sku-28502501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 25 teeth tooth width 12mm outside diameter 40.5mm SKU: 28502500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-25-teeth-tooth-width-12mm-outside-diameter-40-5mm-sku-28502500/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 24 teeth tooth width 12mm outside diameter 39mm SKU: 28502401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-24-teeth-tooth-width-12mm-outside-diameter-39mm-sku-28502401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 24 teeth tooth width 12mm outside diameter 39mm SKU: 28502400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-24-teeth-tooth-width-12mm-outside-diameter-39mm-sku-28502400/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 23 teeth tooth width 12mm outside diameter 37,5mm SKU: 28502301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-23-teeth-tooth-width-12mm-outside-diameter-375mm-sku-28502301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 23 teeth tooth width 12mm outside diameter 37.5mm SKU: 28502300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-23-teeth-tooth-width-12mm-outside-diameter-37-5mm-sku-28502300/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 22 teeth tooth width 12mm outside diameter 36mm SKU: 28502201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-22-teeth-tooth-width-12mm-outside-diameter-36mm-sku-28502201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 22 teeth tooth width 12mm outside diameter 36mm SKU: 28502200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-22-teeth-tooth-width-12mm-outside-diameter-36mm-sku-28502200/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 21 teeth tooth width 12mm outside diameter 34,5mm SKU: 28502101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-21-teeth-tooth-width-12mm-outside-diameter-345mm-sku-28502101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 21 teeth tooth width 12mm outside diameter 34.5mm SKU: 28502100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-21-teeth-tooth-width-12mm-outside-diameter-34-5mm-sku-28502100/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 20 teeth tooth width 12mm outside diameter 33mm SKU: 28502001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-20-teeth-tooth-width-12mm-outside-diameter-33mm-sku-28502001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 20 teeth tooth width 12mm outside diameter 33mm SKU: 28502000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-20-teeth-tooth-width-12mm-outside-diameter-33mm-sku-28502000/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 1.5 19 teeth tooth width 12mm outside diameter 31,5mm SKU: 28501901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-1-5-19-teeth-tooth-width-12mm-outside-diameter-315mm-sku-28501901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 1.5 19 teeth tooth width 12mm outside diameter 31.5mm SKU: 28501900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-1-5-19-teeth-tooth-width-12mm-outside-diameter-31-5mm-sku-28501900/): Material: Acetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Open linear bearing unit KG-3-O ISO series 3 premium with open linear ball bearing with angular compensation with double rubber seal for shaft Ø 16mm SKU: 64671601](https://maedler.in/product/open-linear-bearing-unit-kg-3-o-iso-series-3-premium-with-open-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-16mm-sku-64671601/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting, adjustable clearance and double-lip seals . Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 premium with closed linear ball bearing with angular compensation with double rubber seal for shaft Ø 16mm SKU: 64671600](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-premium-with-closed-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-16mm-sku-64671600/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting. Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-FTST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 12mm SKU: 64671207S](https://maedler.in/product/linear-bearing-unit-kg-3-ftst-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-12mm-sku-64671207s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FT ISO series 3 with self-aligning linear ball bearings with seals for shaft Ø 12mm SKU: 64671207](https://maedler.in/product/linear-bearing-unit-kg-3-ft-iso-series-3-with-self-aligning-linear-ball-bearings-with-seals-for-shaft-o-12mm-sku-64671207/): Material: Housing made from extruded aluminium with two closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 12mm SKU: 64671206S](https://maedler.in/product/linear-bearing-unit-kg-3-fst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-12mm-sku-64671206s/): Material: Housing made from extruded aluminium, with precise milled mounting surface and alignment stud Df. With a closed linear bearing ISO series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6 - [Linear bearing unit KG-3-F ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 12mm SKU: 64671206](https://maedler.in/product/linear-bearing-unit-kg-3-f-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-12mm-sku-64671206/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST-O ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 12mm open design SKU: 64671205S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-o-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-12mm-open-design-sku-64671205s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with Easy-Line linear ball bearing for schaft Ø 12mm open design SKU: 64671205E](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-12mm-open-design-sku-64671205e/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 12mm open design SKU: 64671205](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-12mm-open-design-sku-64671205/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 12mm SKU: 64671204S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-12mm-sku-64671204s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with Easy-Line linear ball bearing for schaft Ø 12mm SKU: 64671204E](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-12mm-sku-64671204e/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 12mm SKU: 64671204](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-12mm-sku-64671204/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-STO ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 12mm open design SKU: 64671203S](https://maedler.in/product/linear-bearing-unit-kg-3-sto-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-12mm-open-design-sku-64671203s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-O ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 12mm open design SKU: 64671203](https://maedler.in/product/linear-bearing-unit-kg-3-o-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-12mm-open-design-sku-64671203/): Material: Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-ST ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 12mm SKU: 64671202S](https://maedler.in/product/linear-bearing-unit-kg-3-st-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-12mm-sku-64671202s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 12mm SKU: 64671202](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-12mm-sku-64671202/): Material: Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open linear bearing unit KG-3-O ISO series 3 premium with open linear ball bearing with angular compensation with double rubber seal for shaft Ø 12mm SKU: 64671201](https://maedler.in/product/open-linear-bearing-unit-kg-3-o-iso-series-3-premium-with-open-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-12mm-sku-64671201/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting, adjustable clearance and double-lip seals . Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 premium with closed linear ball bearing with angular compensation with double rubber seal for shaft Ø 12mm SKU: 64671200](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-premium-with-closed-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-12mm-sku-64671200/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting. Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 50mm SKU: 64665050](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-50mm-sku-64665050/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision housing KG ISO series 3 bore 75mm slotted for linear bearing for shaft diameter 50mm SKU: 64665000](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-75mm-slotted-for-linear-bearing-for-shaft-diameter-50mm-sku-64665000/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. The desired radial clearance can be set with an adjusting screw during the mounting. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 40mm SKU: 64664040](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-40mm-sku-64664040/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision housing KG ISO series 3 bore 62mm slotted for linear bearing for shaft diameter 40mm SKU: 64664000](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-62mm-slotted-for-linear-bearing-for-shaft-diameter-40mm-sku-64664000/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. The desired radial clearance can be set with an adjusting screw during the mounting. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 30mm SKU: 64663030](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-30mm-sku-64663030/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision housing KG ISO series 3 bore 47mm slotted for linear bearing for shaft diameter 30mm SKU: 64663000](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-47mm-slotted-for-linear-bearing-for-shaft-diameter-30mm-sku-64663000/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. The desired radial clearance can be set with an adjusting screw during the mounting. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 25mm SKU: 64662525](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-25mm-sku-64662525/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision housing KG ISO series 3 bore 40mm slotted for linear bearing for shaft diameter 25mm SKU: 64662500](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-40mm-slotted-for-linear-bearing-for-shaft-diameter-25mm-sku-64662500/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. The desired radial clearance can be set with an adjusting screw during the mounting. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 20mm SKU: 64662020](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-20mm-sku-64662020/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision housing KG ISO series 3 bore 32mm slotted for linear bearing for shaft diameter 20mm SKU: 64662000](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-32mm-slotted-for-linear-bearing-for-shaft-diameter-20mm-sku-64662000/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. The desired radial clearance can be set with an adjusting screw during the mounting. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 16mm SKU: 64661616](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-16mm-sku-64661616/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision housing KG ISO series 3 bore 26mm slotted for linear bearing for shaft diameter 16mm SKU: 64661600](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-26mm-slotted-for-linear-bearing-for-shaft-diameter-16mm-sku-64661600/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. The desired radial clearance can be set with an adjusting screw during the mounting. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 14mm SKU: 64661414](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-14mm-sku-64661414/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 12mm SKU: 64661212](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-12mm-sku-64661212/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision housing KG ISO series 3 bore 22mm slotted for linear bearing for shaft diameter 12mm SKU: 64661200](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-22mm-slotted-for-linear-bearing-for-shaft-diameter-12mm-sku-64661200/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. The desired radial clearance can be set with an adjusting screw during the mounting. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 10mm SKU: 64661010](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-10mm-sku-64661010/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 8mm SKU: 64660808](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-8mm-sku-64660808/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision housing KG ISO series 3 bore 16mm slotted for linear bearing for shaft diameter 8mm SKU: 64660800](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-16mm-slotted-for-linear-bearing-for-shaft-diameter-8mm-sku-64660800/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. The desired radial clearance can be set with an adjusting screw during the mounting. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seal for shaft diameter 6mm SKU: 64660606](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-6mm-sku-64660606/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 50mm SKU: 64655050](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-50mm-sku-64655050/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Open precision housing KG-O ISO series 3 bore 75mm for open linear bearing for shaft Ø 50mm SKU: 64655001](https://maedler.in/product/open-precision-housing-kg-o-iso-series-3-bore-75mm-for-open-linear-bearing-for-shaft-o-50mm-sku-64655001/): Material: Aluminium die-cast. Light housing for linear bearings of open design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Precision housing KG ISO series 3 bore 75mm closed for linear bearing for shaft Ø 50mm SKU: 64655000](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-75mm-closed-for-linear-bearing-for-shaft-o-50mm-sku-64655000/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 40mm SKU: 64654040](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-40mm-sku-64654040/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Open precision housing KG-O ISO series 3 bore 62mm for open linear bearing for shaft Ø 40mm SKU: 64654001](https://maedler.in/product/open-precision-housing-kg-o-iso-series-3-bore-62mm-for-open-linear-bearing-for-shaft-o-40mm-sku-64654001/): Material: Aluminium die-cast. Light housing for linear bearings of open design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Precision housing KG ISO series 3 bore 62mm closed for linear bearing for shaft Ø 40mm SKU: 64654000](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-62mm-closed-for-linear-bearing-for-shaft-o-40mm-sku-64654000/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 30mm SKU: 64653030](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-30mm-sku-64653030/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Open precision housing KG-O ISO series 3 bore 47mm for open linear bearing for shaft Ø 30mm SKU: 64653001](https://maedler.in/product/open-precision-housing-kg-o-iso-series-3-bore-47mm-for-open-linear-bearing-for-shaft-o-30mm-sku-64653001/): Material: Aluminium die-cast. Light housing for linear bearings of open design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Precision housing KG ISO series 3 bore 47mm closed for linear bearing for shaft Ø 30mm SKU: 64653000](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-47mm-closed-for-linear-bearing-for-shaft-o-30mm-sku-64653000/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 25mm SKU: 64652525](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-25mm-sku-64652525/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Open precision housing KG-O ISO series 3 bore 40mm for open linear bearing for shaft Ø 25mm SKU: 64652501](https://maedler.in/product/open-precision-housing-kg-o-iso-series-3-bore-40mm-for-open-linear-bearing-for-shaft-o-25mm-sku-64652501/): Material: Aluminium die-cast. Light housing for linear bearings of open design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Precision housing KG ISO series 3 bore 40mm closed for linear bearing for shaft Ø 25mm SKU: 64652500](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-40mm-closed-for-linear-bearing-for-shaft-o-25mm-sku-64652500/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 20mm SKU: 64652020](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-20mm-sku-64652020/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Open precision housing KG-O ISO series 3 bore 32mm for open linear bearing for shaft Ø 20mm SKU: 64652001](https://maedler.in/product/open-precision-housing-kg-o-iso-series-3-bore-32mm-for-open-linear-bearing-for-shaft-o-20mm-sku-64652001/): Material: Aluminium die-cast. Light housing for linear bearings of open design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Precision housing KG ISO series 3 bore 32mm closed for linear bearing for shaft Ø 20mm SKU: 64652000](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-32mm-closed-for-linear-bearing-for-shaft-o-20mm-sku-64652000/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 16mm SKU: 64651616](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-16mm-sku-64651616/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Open precision housing KG-O ISO series 3 bore 26mm for open linear bearing for shaft Ø 16mm SKU: 64651601](https://maedler.in/product/open-precision-housing-kg-o-iso-series-3-bore-26mm-for-open-linear-bearing-for-shaft-o-16mm-sku-64651601/): Material: Aluminium die-cast. Light housing for linear bearings of open design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Precision housing KG ISO series 3 bore 26mm closed for linear bearing for shaft Ø 16mm SKU: 64651600](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-26mm-closed-for-linear-bearing-for-shaft-o-16mm-sku-64651600/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 14mm SKU: 64651414](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-14mm-sku-64651414/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 12mm SKU: 64651212](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-12mm-sku-64651212/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Open precision housing KG-O ISO series 3 bore 22mm for open linear bearing for shaft Ø 12mm SKU: 64651201](https://maedler.in/product/open-precision-housing-kg-o-iso-series-3-bore-22mm-for-open-linear-bearing-for-shaft-o-12mm-sku-64651201/): Material: Aluminium die-cast. Light housing for linear bearings of open design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Precision housing KG ISO series 3 bore 22mm closed for linear bearing for shaft Ø 12mm SKU: 64651200](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-22mm-closed-for-linear-bearing-for-shaft-o-12mm-sku-64651200/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 10mm SKU: 64651010](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-10mm-sku-64651010/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 8mm SKU: 64650808](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-8mm-sku-64650808/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision housing KG ISO series 3 bore 16mm closed for linear bearing for shaft Ø 8mm SKU: 64650800](https://maedler.in/product/precision-housing-kg-iso-series-3-bore-16mm-closed-for-linear-bearing-for-shaft-o-8mm-sku-64650800/): Material: Aluminium die-cast. Light housing for linear bearings of closed design, ISO Series 3 (linear bearing has to be ordered separately). The housings can be mounted standing, upside-down or horizontally. The bearing is secured in the housing against axial and radial movement with a grease nipple. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 6mm SKU: 64650606](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-6mm-sku-64650606/): Material: Housing made of extruded aluminium with a compact linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install.Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size. A = with shields. B = with seals. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 50mm SKU: 64645050](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-50mm-sku-64645050/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision double shaft block GWD-3 ISO series 3 for shaft Ø 50mm SKU: 64645002](https://maedler.in/product/precision-double-shaft-block-gwd-3-iso-series-3-for-shaft-o-50mm-sku-64645002/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-3 of the ISO Series 3. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Precision shaft block GW-3 ISO series 3 for shaft diameter 50mm SKU: 64645001](https://maedler.in/product/precision-shaft-block-gw-3-iso-series-3-for-shaft-diameter-50mm-sku-64645001/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from the bottom side choose the next smaller screw size. - [Precision shaft block GW ISO series 3 for shaft diameter 50mm SKU: 64645000](https://maedler.in/product/precision-shaft-block-gw-iso-series-3-for-shaft-diameter-50mm-sku-64645000/): Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 40mm SKU: 64644040](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-40mm-sku-64644040/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision double shaft block GWD-3 ISO series 3 for shaft Ø 40mm SKU: 64644002](https://maedler.in/product/precision-double-shaft-block-gwd-3-iso-series-3-for-shaft-o-40mm-sku-64644002/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-3 of the ISO Series 3. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Precision shaft block GW-3 ISO series 3 for shaft diameter 40mm SKU: 64644001](https://maedler.in/product/precision-shaft-block-gw-3-iso-series-3-for-shaft-diameter-40mm-sku-64644001/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from the bottom side choose the next smaller screw size. - [Precision shaft block GW ISO series 3 for shaft diameter 40mm SKU: 64644000](https://maedler.in/product/precision-shaft-block-gw-iso-series-3-for-shaft-diameter-40mm-sku-64644000/): Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 30mm SKU: 64643030](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-30mm-sku-64643030/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision double shaft block GWD-3 ISO series 3 for shaft Ø 30mm SKU: 64643002](https://maedler.in/product/precision-double-shaft-block-gwd-3-iso-series-3-for-shaft-o-30mm-sku-64643002/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-3 of the ISO Series 3. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Precision shaft block GW-3 ISO series 3 for shaft diameter 30mm SKU: 64643001](https://maedler.in/product/precision-shaft-block-gw-3-iso-series-3-for-shaft-diameter-30mm-sku-64643001/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from the bottom side choose the next smaller screw size. - [Precision shaft block GW ISO series 3 for shaft diameter 30mm SKU: 64643000](https://maedler.in/product/precision-shaft-block-gw-iso-series-3-for-shaft-diameter-30mm-sku-64643000/): Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 25mm SKU: 64642525](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-25mm-sku-64642525/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision double shaft block GWD-3 ISO series 3 for shaft Ø 25mm SKU: 64642502](https://maedler.in/product/precision-double-shaft-block-gwd-3-iso-series-3-for-shaft-o-25mm-sku-64642502/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-3 of the ISO Series 3. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Precision shaft block GW-3 ISO series 3 for shaft diameter 25mm SKU: 64642501](https://maedler.in/product/precision-shaft-block-gw-3-iso-series-3-for-shaft-diameter-25mm-sku-64642501/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from the bottom side choose the next smaller screw size. - [Precision shaft block GW ISO series 3 for shaft diameter 25mm SKU: 64642500](https://maedler.in/product/precision-shaft-block-gw-iso-series-3-for-shaft-diameter-25mm-sku-64642500/): Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 20mm SKU: 64642020](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-20mm-sku-64642020/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision double shaft block GWD-3 ISO series 3 for shaft Ø 20mm SKU: 64642002](https://maedler.in/product/precision-double-shaft-block-gwd-3-iso-series-3-for-shaft-o-20mm-sku-64642002/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-3 of the ISO Series 3. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Precision shaft block GW-3 ISO series 3 for shaft diameter 20mm SKU: 64642001](https://maedler.in/product/precision-shaft-block-gw-3-iso-series-3-for-shaft-diameter-20mm-sku-64642001/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from the bottom side choose the next smaller screw size. - [Precision shaft block GW ISO series 3 for shaft diameter 20mm SKU: 64642000](https://maedler.in/product/precision-shaft-block-gw-iso-series-3-for-shaft-diameter-20mm-sku-64642000/): Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 16mm SKU: 64641616](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-16mm-sku-64641616/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision double shaft block GWD-3 ISO series 3 for shaft Ø 16mm SKU: 64641602](https://maedler.in/product/precision-double-shaft-block-gwd-3-iso-series-3-for-shaft-o-16mm-sku-64641602/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-3 of the ISO Series 3. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Precision shaft block GW-3 ISO series 3 for shaft diameter 16mm SKU: 64641601](https://maedler.in/product/precision-shaft-block-gw-3-iso-series-3-for-shaft-diameter-16mm-sku-64641601/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from the bottom side choose the next smaller screw size. - [Precision shaft block GW ISO series 3 for shaft diameter 16mm SKU: 64641600](https://maedler.in/product/precision-shaft-block-gw-iso-series-3-for-shaft-diameter-16mm-sku-64641600/): Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 14mm SKU: 64641414](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-14mm-sku-64641414/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 12mm SKU: 64641212](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-12mm-sku-64641212/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision double shaft block GWD-3 ISO series 3 for shaft Ø 12mm SKU: 64641202](https://maedler.in/product/precision-double-shaft-block-gwd-3-iso-series-3-for-shaft-o-12mm-sku-64641202/): Material: Extruded aluminium. Matching quadro linear-bearing units KGQ-3 of the ISO Series 3. These tandem shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. *For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. * For cylindrical screws with Allen screw according to DIN 912 or ISO 4762. - [Precision shaft block GW-3 ISO series 3 for shaft diameter 12mm SKU: 64641201](https://maedler.in/product/precision-shaft-block-gw-3-iso-series-3-for-shaft-diameter-12mm-sku-64641201/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from the bottom side choose the next smaller screw size. - [Precision shaft block GW ISO series 3 for shaft diameter 12mm SKU: 64641200](https://maedler.in/product/precision-shaft-block-gw-iso-series-3-for-shaft-diameter-12mm-sku-64641200/): Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 10mm SKU: 64641010](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-10mm-sku-64641010/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision shaft block GW-1 ISO series 1 for shaft diameter 8mm SKU: 64640808](https://maedler.in/product/precision-shaft-block-gw-1-iso-series-1-for-shaft-diameter-8mm-sku-64640808/): Material: Extruded aluminium. Matching linear-bearing units of ISO Series 1. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. * when mounting from above choose the next smaller screw size. - [Precision shaft block GW ISO series 3 for shaft diameter 8mm SKU: 64640800](https://maedler.in/product/precision-shaft-block-gw-iso-series-3-for-shaft-diameter-8mm-sku-64640800/): Material: Extruded aluminium. Light Design, matching linear-bearing units of ISO Series 3. Shaft blocks are practical and robust machine elements, that provide a simple way of attaching the guiding shaft of the linear bearings on the respective machine parts. They allow true to size and, most important, cost efficient constructions. - [Shaft block GWLE for shaft diameter 50mm SKU: 64640750](https://maedler.in/product/shaft-block-gwle-for-shaft-diameter-50mm-sku-64640750/): Material: Extruded Aluminium. Clamp screw strength 8.8, Steel zinc-plated. Universel use shaft blocks, e.g. for fastening of guide shafts. - [Shaft block GWLE for shaft diameter 40mm SKU: 64640740](https://maedler.in/product/shaft-block-gwle-for-shaft-diameter-40mm-sku-64640740/): Material: Extruded Aluminium. Clamp screw strength 8.8, Steel zinc-plated. Universel use shaft blocks, e.g. for fastening of guide shafts. - [Shaft block GWLE for shaft diameter 30mm SKU: 64640730](https://maedler.in/product/shaft-block-gwle-for-shaft-diameter-30mm-sku-64640730/): Material: Extruded Aluminium. Clamp screw strength 8.8, Steel zinc-plated. Universel use shaft blocks, e.g. for fastening of guide shafts. - [Shaft block GWLE for shaft diameter 25mm SKU: 64640725](https://maedler.in/product/shaft-block-gwle-for-shaft-diameter-25mm-sku-64640725/): Material: Extruded Aluminium. Clamp screw strength 8.8, Steel zinc-plated. Universel use shaft blocks, e.g. for fastening of guide shafts. - [Shaft block GWLE for shaft diameter 20mm SKU: 64640720](https://maedler.in/product/shaft-block-gwle-for-shaft-diameter-20mm-sku-64640720/): Material: Extruded Aluminium. Clamp screw strength 8.8, Steel zinc-plated. Universel use shaft blocks, e.g. for fastening of guide shafts. - [Spur gear made of polyketone die-cast with hub module 2.5 60 teeth tooth width 19mm outside diameter 155mm SKU: 28706001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-60-teeth-tooth-width-19mm-outside-diameter-155mm-sku-28706001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 60 teeth tooth width 19mm outside diameter 155mm SKU: 28706000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-60-teeth-tooth-width-19mm-outside-diameter-155mm-sku-28706000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 55 teeth tooth width 17mm outside diameter 142,5mm SKU: 28705501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-55-teeth-tooth-width-17mm-outside-diameter-1425mm-sku-28705501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 55 teeth tooth width 17mm outside diameter 142,5mm SKU: 28705500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-55-teeth-tooth-width-17mm-outside-diameter-1425mm-sku-28705500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 50 teeth tooth width 17mm outside diameter 130mm SKU: 28705001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-50-teeth-tooth-width-17mm-outside-diameter-130mm-sku-28705001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 50 teeth tooth width 17mm outside diameter 130mm SKU: 28705000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-50-teeth-tooth-width-17mm-outside-diameter-130mm-sku-28705000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 48 teeth tooth width 17mm outside diameter 125mm SKU: 28704801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-48-teeth-tooth-width-17mm-outside-diameter-125mm-sku-28704801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 48 teeth tooth width 17mm outside diameter 125mm SKU: 28704800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-48-teeth-tooth-width-17mm-outside-diameter-125mm-sku-28704800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 45 teeth tooth width 17mm outside diameter 117,5mm SKU: 28704501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-45-teeth-tooth-width-17mm-outside-diameter-1175mm-sku-28704501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 45 teeth tooth width 17mm outside diameter 117,5mm SKU: 28704500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-45-teeth-tooth-width-17mm-outside-diameter-1175mm-sku-28704500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 42 teeth tooth width 17mm outside diameter 110mm SKU: 28704201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-42-teeth-tooth-width-17mm-outside-diameter-110mm-sku-28704201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 42 teeth tooth width 17mm outside diameter 110mm SKU: 28704200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-42-teeth-tooth-width-17mm-outside-diameter-110mm-sku-28704200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 40 teeth tooth width 17mm outside diameter 105mm SKU: 28704001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-40-teeth-tooth-width-17mm-outside-diameter-105mm-sku-28704001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 40 teeth tooth width 17mm outside diameter 105mm SKU: 28704000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-40-teeth-tooth-width-17mm-outside-diameter-105mm-sku-28704000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 38 teeth tooth width 17mm outside diameter 100mm SKU: 28703801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-38-teeth-tooth-width-17mm-outside-diameter-100mm-sku-28703801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 38 teeth tooth width 17mm outside diameter 100mm SKU: 28703800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-38-teeth-tooth-width-17mm-outside-diameter-100mm-sku-28703800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 36 teeth tooth width 17mm outside diameter 95mm SKU: 28703601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-36-teeth-tooth-width-17mm-outside-diameter-95mm-sku-28703601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 36 teeth tooth width 17mm outside diameter 95mm SKU: 28703600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-36-teeth-tooth-width-17mm-outside-diameter-95mm-sku-28703600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 35 teeth tooth width 17mm outside diameter 92,5mm SKU: 28703501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-35-teeth-tooth-width-17mm-outside-diameter-925mm-sku-28703501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 35 teeth tooth width 17mm outside diameter 92,5mm SKU: 28703500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-35-teeth-tooth-width-17mm-outside-diameter-925mm-sku-28703500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 32 teeth tooth width 17mm outside diameter 85mm SKU: 28703201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-32-teeth-tooth-width-17mm-outside-diameter-85mm-sku-28703201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 32 teeth tooth width 17mm outside diameter 85mm SKU: 28703200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-32-teeth-tooth-width-17mm-outside-diameter-85mm-sku-28703200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 30 teeth tooth width 17mm outside diameter 80mm SKU: 28703001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-30-teeth-tooth-width-17mm-outside-diameter-80mm-sku-28703001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 30 teeth tooth width 17mm outside diameter 80mm SKU: 28703000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-30-teeth-tooth-width-17mm-outside-diameter-80mm-sku-28703000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 28 teeth tooth width 17mm outside diameter 75mm SKU: 28702801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-28-teeth-tooth-width-17mm-outside-diameter-75mm-sku-28702801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 28 teeth tooth width 17mm outside diameter 75mm SKU: 28702800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-28-teeth-tooth-width-17mm-outside-diameter-75mm-sku-28702800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 27 teeth tooth width 17mm outside diameter 72,5mm SKU: 28702701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-27-teeth-tooth-width-17mm-outside-diameter-725mm-sku-28702701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 27 teeth tooth width 17mm outside diameter 72,5mm SKU: 28702700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-27-teeth-tooth-width-17mm-outside-diameter-725mm-sku-28702700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 26 teeth tooth width 17mm outside diameter 70mm SKU: 28702601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-26-teeth-tooth-width-17mm-outside-diameter-70mm-sku-28702601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 26 teeth tooth width 17mm outside diameter 70mm SKU: 28702600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-26-teeth-tooth-width-17mm-outside-diameter-70mm-sku-28702600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 25 teeth tooth width 17mm outside diameter 67,5mm SKU: 28702501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-25-teeth-tooth-width-17mm-outside-diameter-675mm-sku-28702501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 25 teeth tooth width 17mm outside diameter 67,5mm SKU: 28702500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-25-teeth-tooth-width-17mm-outside-diameter-675mm-sku-28702500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 24 teeth tooth width 17mm outside diameter 65mm SKU: 28702401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-24-teeth-tooth-width-17mm-outside-diameter-65mm-sku-28702401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 24 teeth tooth width 17mm outside diameter 65mm SKU: 28702400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-24-teeth-tooth-width-17mm-outside-diameter-65mm-sku-28702400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 23 teeth tooth width 17mm outside diameter 62,5mm SKU: 28702301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-23-teeth-tooth-width-17mm-outside-diameter-625mm-sku-28702301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 23 teeth tooth width 17mm outside diameter 62,5mm SKU: 28702300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-23-teeth-tooth-width-17mm-outside-diameter-625mm-sku-28702300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 22 teeth tooth width 17mm outside diameter 60mm SKU: 28702201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-22-teeth-tooth-width-17mm-outside-diameter-60mm-sku-28702201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 22 teeth tooth width 17mm outside diameter 60mm SKU: 28702200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-22-teeth-tooth-width-17mm-outside-diameter-60mm-sku-28702200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 21 teeth tooth width 17mm outside diameter 57,5mm SKU: 28702101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-21-teeth-tooth-width-17mm-outside-diameter-575mm-sku-28702101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 21 teeth tooth width 17mm outside diameter 57,5mm SKU: 28702100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-21-teeth-tooth-width-17mm-outside-diameter-575mm-sku-28702100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 20 teeth tooth width 17mm outside diameter 55mm SKU: 28702001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-20-teeth-tooth-width-17mm-outside-diameter-55mm-sku-28702001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 20 teeth tooth width 17mm outside diameter 55mm SKU: 28702000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-20-teeth-tooth-width-17mm-outside-diameter-55mm-sku-28702000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 19 teeth tooth width 17mm outside diameter 52,5mm SKU: 28701901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-19-teeth-tooth-width-17mm-outside-diameter-525mm-sku-28701901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 19 teeth tooth width 17mm outside diameter 52,5mm SKU: 28701900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-19-teeth-tooth-width-17mm-outside-diameter-525mm-sku-28701900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 18 teeth tooth width 17mm outside diameter 50mm SKU: 28701801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-18-teeth-tooth-width-17mm-outside-diameter-50mm-sku-28701801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 18 teeth tooth width 17mm outside diameter 50mm SKU: 28701800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-18-teeth-tooth-width-17mm-outside-diameter-50mm-sku-28701800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 17 teeth tooth width 17mm outside diameter 47,5mm SKU: 28701701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-17-teeth-tooth-width-17mm-outside-diameter-475mm-sku-28701701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 17 teeth tooth width 17mm outside diameter 47,5mm SKU: 28701700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-17-teeth-tooth-width-17mm-outside-diameter-475mm-sku-28701700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 16 teeth tooth width 17mm outside diameter 45mm SKU: 28701601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-16-teeth-tooth-width-17mm-outside-diameter-45mm-sku-28701601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 16 teeth tooth width 17mm outside diameter 45mm SKU: 28701600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-16-teeth-tooth-width-17mm-outside-diameter-45mm-sku-28701600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 15 teeth tooth width 17mm outside diameter 42,5mm SKU: 28701501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-15-teeth-tooth-width-17mm-outside-diameter-425mm-sku-28701501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 15 teeth tooth width 17mm outside diameter 42,5mm SKU: 28701500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-15-teeth-tooth-width-17mm-outside-diameter-425mm-sku-28701500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 14 teeth tooth width 17mm outside diameter 40mm SKU: 28701401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-14-teeth-tooth-width-17mm-outside-diameter-40mm-sku-28701401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 14 teeth tooth width 17mm outside diameter 40mm SKU: 28701400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-14-teeth-tooth-width-17mm-outside-diameter-40mm-sku-28701400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 13 teeth tooth width 17mm outside diameter 37,5mm SKU: 28701301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-13-teeth-tooth-width-17mm-outside-diameter-375mm-sku-28701301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 13 teeth tooth width 17mm outside diameter 37,5mm SKU: 28701300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-13-teeth-tooth-width-17mm-outside-diameter-375mm-sku-28701300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 12 teeth tooth width 17mm outside diameter 35mm SKU: 28701201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-12-teeth-tooth-width-17mm-outside-diameter-35mm-sku-28701201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 12 teeth tooth width 17mm outside diameter 35mm SKU: 28701200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-12-teeth-tooth-width-17mm-outside-diameter-35mm-sku-28701200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 10 teeth tooth width 17mm outside diameter 30mm SKU: 28701001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-10-teeth-tooth-width-17mm-outside-diameter-30mm-sku-28701001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 10 teeth tooth width 17mm outside diameter 30mm SKU: 28701000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-10-teeth-tooth-width-17mm-outside-diameter-30mm-sku-28701000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 110 teeth tooth width 19mm outside diameter 224mm SKU: 28611001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-110-teeth-tooth-width-19mm-outside-diameter-224mm-sku-28611001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 110 teeth tooth width 19mm outside diameter 224mm SKU: 28611000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-110-teeth-tooth-width-19mm-outside-diameter-224mm-sku-28611000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 100 teeth tooth width 19mm outside diameter 204mm SKU: 28610001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-100-teeth-tooth-width-19mm-outside-diameter-204mm-sku-28610001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 100 teeth tooth width 19mm outside diameter 204mm SKU: 28610000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-100-teeth-tooth-width-19mm-outside-diameter-204mm-sku-28610000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 95 teeth tooth width 19mm outside diameter 194mm SKU: 28609501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-95-teeth-tooth-width-19mm-outside-diameter-194mm-sku-28609501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 95 teeth tooth width 19mm outside diameter 194mm SKU: 28609500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-95-teeth-tooth-width-19mm-outside-diameter-194mm-sku-28609500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 90 teeth tooth width 19mm outside diameter 184mm SKU: 28609001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-90-teeth-tooth-width-19mm-outside-diameter-184mm-sku-28609001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 90 teeth tooth width 19mm outside diameter 184mm SKU: 28609000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-90-teeth-tooth-width-19mm-outside-diameter-184mm-sku-28609000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 85 teeth tooth width 19mm outside diameter 174mm SKU: 28608501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-85-teeth-tooth-width-19mm-outside-diameter-174mm-sku-28608501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 85 teeth tooth width 19mm outside diameter 174mm SKU: 28608500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-85-teeth-tooth-width-19mm-outside-diameter-174mm-sku-28608500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 80 teeth tooth width 19mm outside diameter 164mm SKU: 28608001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-80-teeth-tooth-width-19mm-outside-diameter-164mm-sku-28608001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 80 teeth tooth width 19mm outside diameter 164mm SKU: 28608000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-80-teeth-tooth-width-19mm-outside-diameter-164mm-sku-28608000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 75 teeth tooth width 19mm outside diameter 154mm SKU: 28607501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-75-teeth-tooth-width-19mm-outside-diameter-154mm-sku-28607501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 75 teeth tooth width 19mm outside diameter 154mm SKU: 28607500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-75-teeth-tooth-width-19mm-outside-diameter-154mm-sku-28607500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 70 teeth tooth width 15mm outside diameter 144mm SKU: 28607001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-70-teeth-tooth-width-15mm-outside-diameter-144mm-sku-28607001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 70 teeth tooth width 15mm outside diameter 144mm SKU: 28607000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-70-teeth-tooth-width-15mm-outside-diameter-144mm-sku-28607000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 60 teeth tooth width 15mm outside diameter 124mm SKU: 28606001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-60-teeth-tooth-width-15mm-outside-diameter-124mm-sku-28606001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 60 teeth tooth width 15mm outside diameter 124mm SKU: 28606000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-60-teeth-tooth-width-15mm-outside-diameter-124mm-sku-28606000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 55 teeth tooth width 15mm outside diameter 114mm SKU: 28605501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-55-teeth-tooth-width-15mm-outside-diameter-114mm-sku-28605501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 55 teeth tooth width 15mm outside diameter 114mm SKU: 28605500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-55-teeth-tooth-width-15mm-outside-diameter-114mm-sku-28605500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 50 teeth tooth width 15mm outside diameter 104mm SKU: 28605001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-50-teeth-tooth-width-15mm-outside-diameter-104mm-sku-28605001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 50 teeth tooth width 15mm outside diameter 104mm SKU: 28605000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-50-teeth-tooth-width-15mm-outside-diameter-104mm-sku-28605000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 48 teeth tooth width 15mm outside diameter 100mm SKU: 28604801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-48-teeth-tooth-width-15mm-outside-diameter-100mm-sku-28604801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 48 teeth tooth width 15mm outside diameter 100mm SKU: 28604800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-48-teeth-tooth-width-15mm-outside-diameter-100mm-sku-28604800/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 45 teeth tooth width 15mm outside diameter 94mm SKU: 28604501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-45-teeth-tooth-width-15mm-outside-diameter-94mm-sku-28604501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 45 teeth tooth width 15mm outside diameter 94mm SKU: 28604500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-45-teeth-tooth-width-15mm-outside-diameter-94mm-sku-28604500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 42 teeth tooth width 15mm outside diameter 88mm SKU: 28604201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-42-teeth-tooth-width-15mm-outside-diameter-88mm-sku-28604201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 42 teeth tooth width 15mm outside diameter 88mm SKU: 28604200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-42-teeth-tooth-width-15mm-outside-diameter-88mm-sku-28604200/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 40 teeth tooth width 15mm outside diameter 84mm SKU: 28604001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-40-teeth-tooth-width-15mm-outside-diameter-84mm-sku-28604001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 40 teeth tooth width 15mm outside diameter 84mm SKU: 28604000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-40-teeth-tooth-width-15mm-outside-diameter-84mm-sku-28604000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 38 teeth tooth width 15mm outside diameter 80mm SKU: 28603801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-38-teeth-tooth-width-15mm-outside-diameter-80mm-sku-28603801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 38 teeth tooth width 15mm outside diameter 80mm SKU: 28603800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-38-teeth-tooth-width-15mm-outside-diameter-80mm-sku-28603800/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 36 teeth tooth width 15mm outside diameter 76mm SKU: 28603601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-36-teeth-tooth-width-15mm-outside-diameter-76mm-sku-28603601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 36 teeth tooth width 15mm outside diameter 76mm SKU: 28603600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-36-teeth-tooth-width-15mm-outside-diameter-76mm-sku-28603600/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 35 teeth tooth width 15mm outside diameter 74mm SKU: 28603501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-35-teeth-tooth-width-15mm-outside-diameter-74mm-sku-28603501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 35 teeth tooth width 15mm outside diameter 74mm SKU: 28603500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-35-teeth-tooth-width-15mm-outside-diameter-74mm-sku-28603500/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 32 teeth tooth width 15mm outside diameter 68mm SKU: 28603201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-32-teeth-tooth-width-15mm-outside-diameter-68mm-sku-28603201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 32 teeth tooth width 15mm outside diameter 68mm SKU: 28603200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-32-teeth-tooth-width-15mm-outside-diameter-68mm-sku-28603200/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2 30 teeth tooth width 15mm outside diameter 64mm SKU: 28603001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-30-teeth-tooth-width-15mm-outside-diameter-64mm-sku-28603001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2 30 teeth tooth width 15mm outside diameter 64mm SKU: 28603000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-30-teeth-tooth-width-15mm-outside-diameter-64mm-sku-28603000/): Material: Polyacetal resin die-cast. Moulded version. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 16mm SKU: 64681600](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-16mm-sku-64681600/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 14mm SKU: 64681414](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-14mm-sku-64681414/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 12mm SKU: 64681212](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-12mm-sku-64681212/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-STO ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 12mm open design SKU: 64681203S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-sto-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-12mm-open-design-sku-64681203s/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 12mm open design SKU: 64681203](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-12mm-open-design-sku-64681203/): Material: Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-ST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 12mm SKU: 64681202S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-st-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-12mm-sku-64681202s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 12mm SKU: 64681202](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-12mm-sku-64681202/): Material: Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open Tandem linear-bearing unit KGT-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 12mm SKU: 64681201](https://maedler.in/product/open-tandem-linear-bearing-unit-kgt-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-12mm-sku-64681201/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 12mm SKU: 64681200](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-12mm-sku-64681200/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 10mm SKU: 64681010](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-10mm-sku-64681010/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 8mm SKU: 64680808](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-8mm-sku-64680808/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 6mm SKU: 64680606](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-6mm-sku-64680606/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST-O ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 50mm open design SKU: 64675005S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-o-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-50mm-open-design-sku-64675005s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with Easy-Line linear ball bearing for schaft Ø 50mm open design SKU: 64675005E](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-50mm-open-design-sku-64675005e/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 50mm open design SKU: 64675005](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-50mm-open-design-sku-64675005/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 50mm SKU: 64675004S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-50mm-sku-64675004s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with Easy-Line linear ball bearing for schaft Ø 50mm SKU: 64675004E](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-50mm-sku-64675004e/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 50mm SKU: 64675004](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-50mm-sku-64675004/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-STO ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 50mm open design SKU: 64675003S](https://maedler.in/product/linear-bearing-unit-kg-3-sto-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-50mm-open-design-sku-64675003s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-O ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 50mm open design SKU: 64675003](https://maedler.in/product/linear-bearing-unit-kg-3-o-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-50mm-open-design-sku-64675003/): Material: Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-ST ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 50mm SKU: 64675002S](https://maedler.in/product/linear-bearing-unit-kg-3-st-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-50mm-sku-64675002s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 50mm SKU: 64675002](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-50mm-sku-64675002/): Material: Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open linear bearing unit KG-3-O ISO series 3 premium with open linear ball bearing with angular compensation with double rubber seal for shaft Ø 50mm SKU: 64675001](https://maedler.in/product/open-linear-bearing-unit-kg-3-o-iso-series-3-premium-with-open-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-50mm-sku-64675001/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting, adjustable clearance and double-lip seals . Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 premium with closed linear ball bearing with angular compensation with double rubber seal for shaft Ø 50mm SKU: 64675000](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-premium-with-closed-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-50mm-sku-64675000/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting. Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-FST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 40mm SKU: 64674006S](https://maedler.in/product/linear-bearing-unit-kg-3-fst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-40mm-sku-64674006s/): Material: Housing made from extruded aluminium, with precise milled mounting surface and alignment stud Df. With a closed linear bearing ISO series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6 - [Linear bearing unit KG-3-F ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 40mm SKU: 64674006](https://maedler.in/product/linear-bearing-unit-kg-3-f-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-40mm-sku-64674006/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST-O ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 40mm open design SKU: 64674005S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-o-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-40mm-open-design-sku-64674005s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with Easy-Line linear ball bearing for schaft Ø 40mm open design SKU: 64674005E](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-40mm-open-design-sku-64674005e/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 40mm open design SKU: 64674005](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-40mm-open-design-sku-64674005/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 40mm SKU: 64674004S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-40mm-sku-64674004s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with Easy-Line linear ball bearing for schaft Ø 40mm SKU: 64674004E](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-40mm-sku-64674004e/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 40mm SKU: 64674004](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-40mm-sku-64674004/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-STO ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 40mm open design SKU: 64674003S](https://maedler.in/product/linear-bearing-unit-kg-3-sto-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-40mm-open-design-sku-64674003s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-O ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 40mm open design SKU: 64674003](https://maedler.in/product/linear-bearing-unit-kg-3-o-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-40mm-open-design-sku-64674003/): Material: Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-ST ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 40mm SKU: 64674002S](https://maedler.in/product/linear-bearing-unit-kg-3-st-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-40mm-sku-64674002s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 40mm SKU: 64674002](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-40mm-sku-64674002/): Material: Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open linear bearing unit KG-3-O ISO series 3 premium with open linear ball bearing with angular compensation with double rubber seal for shaft Ø 40mm SKU: 64674001](https://maedler.in/product/open-linear-bearing-unit-kg-3-o-iso-series-3-premium-with-open-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-40mm-sku-64674001/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting, adjustable clearance and double-lip seals . Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 premium with closed linear ball bearing with angular compensation with double rubber seal for shaft Ø 40mm SKU: 64674000](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-premium-with-closed-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-40mm-sku-64674000/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting. Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-FTST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 30mm SKU: 64673007S](https://maedler.in/product/linear-bearing-unit-kg-3-ftst-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-30mm-sku-64673007s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FT ISO series 3 with self-aligning linear ball bearings with seals for shaft Ø 30mm SKU: 64673007](https://maedler.in/product/linear-bearing-unit-kg-3-ft-iso-series-3-with-self-aligning-linear-ball-bearings-with-seals-for-shaft-o-30mm-sku-64673007/): Material: Housing made from extruded aluminium with two closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 30mm SKU: 64673006S](https://maedler.in/product/linear-bearing-unit-kg-3-fst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-30mm-sku-64673006s/): Material: Housing made from extruded aluminium, with precise milled mounting surface and alignment stud Df. With a closed linear bearing ISO series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6 - [Linear bearing unit KG-3-F ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 30mm SKU: 64673006](https://maedler.in/product/linear-bearing-unit-kg-3-f-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-30mm-sku-64673006/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST-O ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 30mm open design SKU: 64673005S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-o-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-30mm-open-design-sku-64673005s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with Easy-Line linear ball bearing for schaft Ø 30mm open design SKU: 64673005E](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-30mm-open-design-sku-64673005e/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 30mm open design SKU: 64673005](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-30mm-open-design-sku-64673005/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 30mm SKU: 64673004S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-30mm-sku-64673004s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with Easy-Line linear ball bearing for schaft Ø 30mm SKU: 64673004E](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-30mm-sku-64673004e/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 30mm SKU: 64673004](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-30mm-sku-64673004/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-STO ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 30mm open design SKU: 64673003S](https://maedler.in/product/linear-bearing-unit-kg-3-sto-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-30mm-open-design-sku-64673003s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-O ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 30mm open design SKU: 64673003](https://maedler.in/product/linear-bearing-unit-kg-3-o-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-30mm-open-design-sku-64673003/): Material: Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-ST ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 30mm SKU: 64673002S](https://maedler.in/product/linear-bearing-unit-kg-3-st-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-30mm-sku-64673002s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 30mm SKU: 64673002](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-30mm-sku-64673002/): Material: Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open linear bearing unit KG-3-O ISO series 3 premium with open linear ball bearing with angular compensation with double rubber seal for shaft Ø 30mm SKU: 64673001](https://maedler.in/product/open-linear-bearing-unit-kg-3-o-iso-series-3-premium-with-open-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-30mm-sku-64673001/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting, adjustable clearance and double-lip seals . Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 premium with closed linear ball bearing with angular compensation with double rubber seal for shaft Ø 30mm SKU: 64673000](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-premium-with-closed-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-30mm-sku-64673000/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting. Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-FTST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 25mm SKU: 64672507S](https://maedler.in/product/linear-bearing-unit-kg-3-ftst-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-25mm-sku-64672507s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FT ISO series 3 with self-aligning linear ball bearings with seals for shaft Ø 25mm SKU: 64672507](https://maedler.in/product/linear-bearing-unit-kg-3-ft-iso-series-3-with-self-aligning-linear-ball-bearings-with-seals-for-shaft-o-25mm-sku-64672507/): Material: Housing made from extruded aluminium with two closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 25mm SKU: 64672506S](https://maedler.in/product/linear-bearing-unit-kg-3-fst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-25mm-sku-64672506s/): Material: Housing made from extruded aluminium, with precise milled mounting surface and alignment stud Df. With a closed linear bearing ISO series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6 - [Linear bearing unit KG-3-F ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 25mm SKU: 64672506](https://maedler.in/product/linear-bearing-unit-kg-3-f-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-25mm-sku-64672506/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST-O ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 25mm open design SKU: 64672505S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-o-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-25mm-open-design-sku-64672505s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with Easy-Line linear ball bearing for schaft Ø 25mm open design SKU: 64672505E](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-25mm-open-design-sku-64672505e/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 25mm open design SKU: 64672505](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-25mm-open-design-sku-64672505/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 25mm SKU: 64672504S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-25mm-sku-64672504s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with Easy-Line linear ball bearing for schaft Ø 25mm SKU: 64672504E](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-25mm-sku-64672504e/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 25mm SKU: 64672504](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-25mm-sku-64672504/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-STO ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 25mm open design SKU: 64672503S](https://maedler.in/product/linear-bearing-unit-kg-3-sto-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-25mm-open-design-sku-64672503s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-O ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 25mm open design SKU: 64672503](https://maedler.in/product/linear-bearing-unit-kg-3-o-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-25mm-open-design-sku-64672503/): Material: Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-ST ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 25mm SKU: 64672502S](https://maedler.in/product/linear-bearing-unit-kg-3-st-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-25mm-sku-64672502s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 25mm SKU: 64672502](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-25mm-sku-64672502/): Material: Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open linear bearing unit KG-3-O ISO series 3 premium with open linear ball bearing with angular compensation with double rubber seal for shaft Ø 25mm SKU: 64672501](https://maedler.in/product/open-linear-bearing-unit-kg-3-o-iso-series-3-premium-with-open-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-25mm-sku-64672501/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting, adjustable clearance and double-lip seals . Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 premium with closed linear ball bearing with angular compensation with double rubber seal for shaft Ø 25mm SKU: 64672500](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-premium-with-closed-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-25mm-sku-64672500/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting. Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-FTST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 20mm SKU: 64672007S](https://maedler.in/product/linear-bearing-unit-kg-3-ftst-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-20mm-sku-64672007s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FT ISO series 3 with self-aligning linear ball bearings with seals for shaft Ø 20mm SKU: 64672007](https://maedler.in/product/linear-bearing-unit-kg-3-ft-iso-series-3-with-self-aligning-linear-ball-bearings-with-seals-for-shaft-o-20mm-sku-64672007/): Material: Housing made from extruded aluminium with two closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 20mm SKU: 64672006S](https://maedler.in/product/linear-bearing-unit-kg-3-fst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-20mm-sku-64672006s/): Material: Housing made from extruded aluminium, with precise milled mounting surface and alignment stud Df. With a closed linear bearing ISO series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6 - [Linear bearing unit KG-3-F ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 20mm SKU: 64672006](https://maedler.in/product/linear-bearing-unit-kg-3-f-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-20mm-sku-64672006/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST-O ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 20mm open design SKU: 64672005S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-o-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-20mm-open-design-sku-64672005s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with Easy-Line linear ball bearing for schaft Ø 20mm open design SKU: 64672005E](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-20mm-open-design-sku-64672005e/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 20mm open design SKU: 64672005](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-20mm-open-design-sku-64672005/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 20mm SKU: 64672004S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-20mm-sku-64672004s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with Easy-Line linear ball bearing for schaft Ø 20mm SKU: 64672004E](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-20mm-sku-64672004e/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 20mm SKU: 64672004](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-20mm-sku-64672004/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-STO ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 20mm open design SKU: 64672003S](https://maedler.in/product/linear-bearing-unit-kg-3-sto-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-20mm-open-design-sku-64672003s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-O ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 20mm open design SKU: 64672003](https://maedler.in/product/linear-bearing-unit-kg-3-o-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-20mm-open-design-sku-64672003/): Material: Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-ST ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 20mm SKU: 64672002S](https://maedler.in/product/linear-bearing-unit-kg-3-st-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-20mm-sku-64672002s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 20mm SKU: 64672002](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-20mm-sku-64672002/): Material: Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open linear bearing unit KG-3-O ISO series 3 premium with open linear ball bearing with angular compensation with double rubber seal for shaft Ø 20mm SKU: 64672001](https://maedler.in/product/open-linear-bearing-unit-kg-3-o-iso-series-3-premium-with-open-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-20mm-sku-64672001/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting, adjustable clearance and double-lip seals . Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 premium with closed linear ball bearing with angular compensation with double rubber seal for shaft Ø 20mm SKU: 64672000](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-premium-with-closed-linear-ball-bearing-with-angular-compensation-with-double-rubber-seal-for-shaft-o-20mm-sku-64672000/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting. Lubricated ready-to-install.Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-FTST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 16mm SKU: 64671607S](https://maedler.in/product/linear-bearing-unit-kg-3-ftst-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-16mm-sku-64671607s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FT ISO series 3 with self-aligning linear ball bearings with seals for shaft Ø 16mm SKU: 64671607](https://maedler.in/product/linear-bearing-unit-kg-3-ft-iso-series-3-with-self-aligning-linear-ball-bearings-with-seals-for-shaft-o-16mm-sku-64671607/): Material: Housing made from extruded aluminium with two closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-FST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 16mm SKU: 64671606S](https://maedler.in/product/linear-bearing-unit-kg-3-fst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-16mm-sku-64671606s/): Material: Housing made from extruded aluminium, with precise milled mounting surface and alignment stud Df. With a closed linear bearing ISO series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready for installation. Recommended shaft tolerance h6 - [Linear bearing unit KG-3-F ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 16mm SKU: 64671606](https://maedler.in/product/linear-bearing-unit-kg-3-f-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-16mm-sku-64671606/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST-O ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 16mm open design SKU: 64671605S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-o-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-16mm-open-design-sku-64671605s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with Easy-Line linear ball bearing for schaft Ø 16mm open design SKU: 64671605E](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-16mm-open-design-sku-64671605e/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KO ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 16mm open design SKU: 64671605](https://maedler.in/product/linear-bearing-unit-kg-3-ko-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-16mm-open-design-sku-64671605/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-KST ISO series 3 with linear ball bearing with steel jacket sealed on both sides for schaft Ø 16mm SKU: 64671604S](https://maedler.in/product/linear-bearing-unit-kg-3-kst-iso-series-3-with-linear-ball-bearing-with-steel-jacket-sealed-on-both-sides-for-schaft-o-16mm-sku-64671604s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 with steel jacket and plastic cage. All bearings are sealed on both sides and lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with Easy-Line linear ball bearing for schaft Ø 16mm SKU: 64671604E](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-easy-line-linear-ball-bearing-for-schaft-o-16mm-sku-64671604e/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With wiping seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-K ISO series 3 with self-aligning linear ball bearing with seals for shaft Ø 16mm SKU: 64671604](https://maedler.in/product/linear-bearing-unit-kg-3-k-iso-series-3-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-16mm-sku-64671604/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3 from reliable brand in good quality. Self-aligning capability that accommodates tilting. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-STO ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 16mm open design SKU: 64671603S](https://maedler.in/product/linear-bearing-unit-kg-3-sto-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-16mm-open-design-sku-64671603s/): Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3-O ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 16mm open design SKU: 64671603](https://maedler.in/product/linear-bearing-unit-kg-3-o-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-16mm-open-design-sku-64671603/): Material: Material: Housing made from extruded aluminium with an open linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Linear bearing unit KG-3-ST ISO series 3 with linear ball bearing with steel jacket with seals for shaft Ø 16mm SKU: 64671602S](https://maedler.in/product/linear-bearing-unit-kg-3-st-iso-series-3-with-linear-ball-bearing-with-steel-jacket-with-seals-for-shaft-o-16mm-sku-64671602s/): Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-3 ISO series 3 Easy-Line with self-aligning linear ball bearing with seals for shaft Ø 16mm SKU: 64671602](https://maedler.in/product/linear-bearing-unit-kg-3-iso-series-3-easy-line-with-self-aligning-linear-ball-bearing-with-seals-for-shaft-o-16mm-sku-64671602/): Material: Material: Housing made from extruded aluminium with a closed linear bearing of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Spur gear made of POM with hub module 0.5 40 teeth tooth width 4mm outside diameter 21mm SKU: 29104000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-40-teeth-tooth-width-4mm-outside-diameter-21mm-sku-29104000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 38 teeth tooth width 4mm outside diameter 20mm SKU: 29103800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-38-teeth-tooth-width-4mm-outside-diameter-20mm-sku-29103800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 36 teeth tooth width 4mm outside diameter 19mm SKU: 29103600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-36-teeth-tooth-width-4mm-outside-diameter-19mm-sku-29103600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 35 teeth tooth width 4mm outside diameter 18.5mm SKU: 29103500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-35-teeth-tooth-width-4mm-outside-diameter-18-5mm-sku-29103500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 32 teeth tooth width 4mm outside diameter 17mm SKU: 29103200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-32-teeth-tooth-width-4mm-outside-diameter-17mm-sku-29103200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 30 teeth tooth width 4mm outside diameter 16mm SKU: 29103000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-30-teeth-tooth-width-4mm-outside-diameter-16mm-sku-29103000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 28 teeth tooth width 4mm outside diameter 15mm SKU: 29102800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-28-teeth-tooth-width-4mm-outside-diameter-15mm-sku-29102800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 27 teeth tooth width 4mm outside diameter 14.5mm SKU: 29102700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-27-teeth-tooth-width-4mm-outside-diameter-14-5mm-sku-29102700/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 26 teeth tooth width 4mm outside diameter 14mm SKU: 29102600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-26-teeth-tooth-width-4mm-outside-diameter-14mm-sku-29102600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 25 teeth tooth width 4mm outside diameter 13.5mm SKU: 29102500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-25-teeth-tooth-width-4mm-outside-diameter-13-5mm-sku-29102500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 24 teeth tooth width 4mm outside diameter 13mm SKU: 29102400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-24-teeth-tooth-width-4mm-outside-diameter-13mm-sku-29102400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 23 teeth tooth width 4mm outside diameter 12.5mm SKU: 29102300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-23-teeth-tooth-width-4mm-outside-diameter-12-5mm-sku-29102300/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 22 teeth tooth width 4mm outside diameter 12mm SKU: 29102200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-22-teeth-tooth-width-4mm-outside-diameter-12mm-sku-29102200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 21 teeth tooth width 4mm outside diameter 11.5mm SKU: 29102100](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-21-teeth-tooth-width-4mm-outside-diameter-11-5mm-sku-29102100/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 20 teeth tooth width 4mm outside diameter 11mm SKU: 29102000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-20-teeth-tooth-width-4mm-outside-diameter-11mm-sku-29102000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 19 teeth tooth width 4mm outside diameter 10.5mm SKU: 29101900](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-19-teeth-tooth-width-4mm-outside-diameter-10-5mm-sku-29101900/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 18 teeth tooth width 4mm outside diameter 10mm SKU: 29101800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-18-teeth-tooth-width-4mm-outside-diameter-10mm-sku-29101800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 17 teeth tooth width 4mm outside diameter 9.5mm SKU: 29101700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-17-teeth-tooth-width-4mm-outside-diameter-9-5mm-sku-29101700/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 16 teeth tooth width 4mm outside diameter 9mm SKU: 29101600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-16-teeth-tooth-width-4mm-outside-diameter-9mm-sku-29101600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 15 teeth tooth width 4mm outside diameter 8.5mm SKU: 29101500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-15-teeth-tooth-width-4mm-outside-diameter-8-5mm-sku-29101500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 14 teeth tooth width 4mm outside diameter 8mm SKU: 29101400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-14-teeth-tooth-width-4mm-outside-diameter-8mm-sku-29101400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 13 teeth tooth width 4mm outside diameter 7.5mm SKU: 29101300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-13-teeth-tooth-width-4mm-outside-diameter-7-5mm-sku-29101300/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 12 teeth tooth width 4mm outside diameter 7mm SKU: 29101200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-12-teeth-tooth-width-4mm-outside-diameter-7mm-sku-29101200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 10 teeth tooth width 4mm outside diameter 6mm SKU: 29101000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-10-teeth-tooth-width-4mm-outside-diameter-6mm-sku-29101000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of polyketone die-cast with hub module 3 75 teeth tooth width 19mm outside diameter 231mm SKU: 28807501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-75-teeth-tooth-width-19mm-outside-diameter-231mm-sku-28807501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 75 teeth tooth width 19mm outside diameter 231mm SKU: 28807500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-75-teeth-tooth-width-19mm-outside-diameter-231mm-sku-28807500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 70 teeth tooth width 19mm outside diameter 216mm SKU: 28807001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-70-teeth-tooth-width-19mm-outside-diameter-216mm-sku-28807001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 70 teeth tooth width 19mm outside diameter 216mm SKU: 28807000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-70-teeth-tooth-width-19mm-outside-diameter-216mm-sku-28807000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 65 teeth tooth width 19mm outside diameter 201mm SKU: 28806501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-65-teeth-tooth-width-19mm-outside-diameter-201mm-sku-28806501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 65 teeth tooth width 19mm outside diameter 201mm SKU: 28806500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-65-teeth-tooth-width-19mm-outside-diameter-201mm-sku-28806500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 60 teeth tooth width 19mm outside diameter 186mm SKU: 28806001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-60-teeth-tooth-width-19mm-outside-diameter-186mm-sku-28806001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 60 teeth tooth width 19mm outside diameter 186mm SKU: 28806000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-60-teeth-tooth-width-19mm-outside-diameter-186mm-sku-28806000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 55 teeth tooth width 19mm outside diameter 171mm SKU: 28805501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-55-teeth-tooth-width-19mm-outside-diameter-171mm-sku-28805501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 55 teeth tooth width 19mm outside diameter 171mm SKU: 28805500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-55-teeth-tooth-width-19mm-outside-diameter-171mm-sku-28805500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 50 teeth tooth width 19mm outside diameter 156mm SKU: 28805001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-50-teeth-tooth-width-19mm-outside-diameter-156mm-sku-28805001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 50 teeth tooth width 19mm outside diameter 156mm SKU: 28805000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-50-teeth-tooth-width-19mm-outside-diameter-156mm-sku-28805000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 45 teeth tooth width 19mm outside diameter 141mm SKU: 28804501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-45-teeth-tooth-width-19mm-outside-diameter-141mm-sku-28804501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 45 teeth tooth width 19mm outside diameter 141mm SKU: 28804500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-45-teeth-tooth-width-19mm-outside-diameter-141mm-sku-28804500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 40 teeth tooth width 19mm outside diameter 126mm SKU: 28804001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-40-teeth-tooth-width-19mm-outside-diameter-126mm-sku-28804001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 40 teeth tooth width 19mm outside diameter 126mm SKU: 28804000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-40-teeth-tooth-width-19mm-outside-diameter-126mm-sku-28804000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 38 teeth tooth width 19mm outside diameter 120mm SKU: 28803801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-38-teeth-tooth-width-19mm-outside-diameter-120mm-sku-28803801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 38 teeth tooth width 19mm outside diameter 120mm SKU: 28803800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-38-teeth-tooth-width-19mm-outside-diameter-120mm-sku-28803800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 35 teeth tooth width 19mm outside diameter 111mm SKU: 28803501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-35-teeth-tooth-width-19mm-outside-diameter-111mm-sku-28803501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 35 teeth tooth width 19mm outside diameter 111mm SKU: 28803500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-35-teeth-tooth-width-19mm-outside-diameter-111mm-sku-28803500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 34 teeth tooth width 19mm outside diameter 108mm SKU: 28803401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-34-teeth-tooth-width-19mm-outside-diameter-108mm-sku-28803401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 34 teeth tooth width 19mm outside diameter 108mm SKU: 28803400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-34-teeth-tooth-width-19mm-outside-diameter-108mm-sku-28803400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 33 teeth tooth width 19mm outside diameter 105mm SKU: 28803301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-33-teeth-tooth-width-19mm-outside-diameter-105mm-sku-28803301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 33 teeth tooth width 19mm outside diameter 105mm SKU: 28803300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-33-teeth-tooth-width-19mm-outside-diameter-105mm-sku-28803300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 32 teeth tooth width 19mm outside diameter 102mm SKU: 28803201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-32-teeth-tooth-width-19mm-outside-diameter-102mm-sku-28803201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 32 teeth tooth width 19mm outside diameter 102mm SKU: 28803200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-32-teeth-tooth-width-19mm-outside-diameter-102mm-sku-28803200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 30 teeth tooth width 19mm outside diameter 96mm SKU: 28803001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-30-teeth-tooth-width-19mm-outside-diameter-96mm-sku-28803001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 30 teeth tooth width 19mm outside diameter 96mm SKU: 28803000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-30-teeth-tooth-width-19mm-outside-diameter-96mm-sku-28803000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 28 teeth tooth width 19mm outside diameter 90mm SKU: 28802801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-28-teeth-tooth-width-19mm-outside-diameter-90mm-sku-28802801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 28 teeth tooth width 19mm outside diameter 90mm SKU: 28802800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-28-teeth-tooth-width-19mm-outside-diameter-90mm-sku-28802800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 27 teeth tooth width 19mm outside diameter 87mm SKU: 28802701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-27-teeth-tooth-width-19mm-outside-diameter-87mm-sku-28802701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 27 teeth tooth width 19mm outside diameter 87mm SKU: 28802700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-27-teeth-tooth-width-19mm-outside-diameter-87mm-sku-28802700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 26 teeth tooth width 19mm outside diameter 84mm SKU: 28802601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-26-teeth-tooth-width-19mm-outside-diameter-84mm-sku-28802601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 26 teeth tooth width 19mm outside diameter 84mm SKU: 28802600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-26-teeth-tooth-width-19mm-outside-diameter-84mm-sku-28802600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 25 teeth tooth width 19mm outside diameter 81mm SKU: 28802501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-25-teeth-tooth-width-19mm-outside-diameter-81mm-sku-28802501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 25 teeth tooth width 19mm outside diameter 81mm SKU: 28802500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-25-teeth-tooth-width-19mm-outside-diameter-81mm-sku-28802500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 24 teeth tooth width 19mm outside diameter 78mm SKU: 28802401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-24-teeth-tooth-width-19mm-outside-diameter-78mm-sku-28802401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 24 teeth tooth width 19mm outside diameter 78mm SKU: 28802400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-24-teeth-tooth-width-19mm-outside-diameter-78mm-sku-28802400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 23 teeth tooth width 19mm outside diameter 75mm SKU: 28802301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-23-teeth-tooth-width-19mm-outside-diameter-75mm-sku-28802301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 23 teeth tooth width 19mm outside diameter 75mm SKU: 28802300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-23-teeth-tooth-width-19mm-outside-diameter-75mm-sku-28802300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 22 teeth tooth width 19mm outside diameter 72mm SKU: 28802201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-22-teeth-tooth-width-19mm-outside-diameter-72mm-sku-28802201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 22 teeth tooth width 19mm outside diameter 72mm SKU: 28802200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-22-teeth-tooth-width-19mm-outside-diameter-72mm-sku-28802200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 21 teeth tooth width 19mm outside diameter 69mm SKU: 28802101](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-21-teeth-tooth-width-19mm-outside-diameter-69mm-sku-28802101/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 21 teeth tooth width 19mm outside diameter 69mm SKU: 28802100](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-21-teeth-tooth-width-19mm-outside-diameter-69mm-sku-28802100/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 20 teeth tooth width 19mm outside diameter 66mm SKU: 28802001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-20-teeth-tooth-width-19mm-outside-diameter-66mm-sku-28802001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 20 teeth tooth width 19mm outside diameter 66mm SKU: 28802000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-20-teeth-tooth-width-19mm-outside-diameter-66mm-sku-28802000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 19 teeth tooth width 19mm outside diameter 63mm SKU: 28801901](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-19-teeth-tooth-width-19mm-outside-diameter-63mm-sku-28801901/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 19 teeth tooth width 19mm outside diameter 63mm SKU: 28801900](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-19-teeth-tooth-width-19mm-outside-diameter-63mm-sku-28801900/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 18 teeth tooth width 19mm outside diameter 60mm SKU: 28801801](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-18-teeth-tooth-width-19mm-outside-diameter-60mm-sku-28801801/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 18 teeth tooth width 19mm outside diameter 60mm SKU: 28801800](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-18-teeth-tooth-width-19mm-outside-diameter-60mm-sku-28801800/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 17 teeth tooth width 19mm outside diameter 57mm SKU: 28801701](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-17-teeth-tooth-width-19mm-outside-diameter-57mm-sku-28801701/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 17 teeth tooth width 19mm outside diameter 57mm SKU: 28801700](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-17-teeth-tooth-width-19mm-outside-diameter-57mm-sku-28801700/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 16 teeth tooth width 19mm outside diameter 54mm SKU: 28801601](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-16-teeth-tooth-width-19mm-outside-diameter-54mm-sku-28801601/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 16 teeth tooth width 19mm outside diameter 54mm SKU: 28801600](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-16-teeth-tooth-width-19mm-outside-diameter-54mm-sku-28801600/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 15 teeth tooth width 19mm outside diameter 51mm SKU: 28801501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-15-teeth-tooth-width-19mm-outside-diameter-51mm-sku-28801501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 15 teeth tooth width 19mm outside diameter 51mm SKU: 28801500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-15-teeth-tooth-width-19mm-outside-diameter-51mm-sku-28801500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 14 teeth tooth width 19mm outside diameter 48mm SKU: 28801401](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-14-teeth-tooth-width-19mm-outside-diameter-48mm-sku-28801401/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 14 teeth tooth width 19mm outside diameter 48mm SKU: 28801400](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-14-teeth-tooth-width-19mm-outside-diameter-48mm-sku-28801400/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 13 teeth tooth width 19mm outside diameter 45mm SKU: 28801301](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-13-teeth-tooth-width-19mm-outside-diameter-45mm-sku-28801301/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 13 teeth tooth width 19mm outside diameter 45mm SKU: 28801300](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-13-teeth-tooth-width-19mm-outside-diameter-45mm-sku-28801300/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 3 12 teeth tooth width 19mm outside diameter 42mm SKU: 28801201](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-3-12-teeth-tooth-width-19mm-outside-diameter-42mm-sku-28801201/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 3 12 teeth tooth width 19mm outside diameter 42mm SKU: 28801200](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-3-12-teeth-tooth-width-19mm-outside-diameter-42mm-sku-28801200/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 95 teeth tooth width 19mm outside diameter 242,5mm SKU: 28709501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-95-teeth-tooth-width-19mm-outside-diameter-2425mm-sku-28709501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 95 teeth tooth width 19mm outside diameter 242,5mm SKU: 28709500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-95-teeth-tooth-width-19mm-outside-diameter-2425mm-sku-28709500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 90 teeth tooth width 19mm outside diameter 230mm SKU: 28709001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-90-teeth-tooth-width-19mm-outside-diameter-230mm-sku-28709001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 90 teeth tooth width 19mm outside diameter 230mm SKU: 28709000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-90-teeth-tooth-width-19mm-outside-diameter-230mm-sku-28709000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 85 teeth tooth width 19mm outside diameter 217,5mm SKU: 28708501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-85-teeth-tooth-width-19mm-outside-diameter-2175mm-sku-28708501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 85 teeth tooth width 19mm outside diameter 217,5mm SKU: 28708500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-85-teeth-tooth-width-19mm-outside-diameter-2175mm-sku-28708500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 80 teeth tooth width 19mm outside diameter 205mm SKU: 28708001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-80-teeth-tooth-width-19mm-outside-diameter-205mm-sku-28708001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 80 teeth tooth width 19mm outside diameter 205mm SKU: 28708000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-80-teeth-tooth-width-19mm-outside-diameter-205mm-sku-28708000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 75 teeth tooth width 19mm outside diameter 192,5mm SKU: 28707501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-75-teeth-tooth-width-19mm-outside-diameter-1925mm-sku-28707501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 75 teeth tooth width 19mm outside diameter 192,5mm SKU: 28707500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-75-teeth-tooth-width-19mm-outside-diameter-1925mm-sku-28707500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 70 teeth tooth width 19mm outside diameter 180mm SKU: 28707001](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-70-teeth-tooth-width-19mm-outside-diameter-180mm-sku-28707001/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 70 teeth tooth width 19mm outside diameter 180mm SKU: 28707000](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-70-teeth-tooth-width-19mm-outside-diameter-180mm-sku-28707000/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Spur gear made of polyketone die-cast with hub module 2.5 65 teeth tooth width 19mm outside diameter 167,5mm SKU: 28706501](https://maedler.in/product/spur-gear-made-of-polyketone-die-cast-with-hub-module-2-5-65-teeth-tooth-width-19mm-outside-diameter-1675mm-sku-28706501/): Material: Polyketone (PK), ivory-colored.Moulded version. Bores machined. Pressure angle 20º. Usable also under water or other mediums.Lower friction than polyacetal gears leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C due to the load. - [Spur gear made of polyacetal resin die-cast with hub module 2.5 65 teeth tooth width 19mm outside diameter 167,5mm SKU: 28706500](https://maedler.in/product/spur-gear-made-of-polyacetal-resin-die-cast-with-hub-module-2-5-65-teeth-tooth-width-19mm-outside-diameter-1675mm-sku-28706500/): Material: Polyacetal resin die-cast. Bores machined. Pressure angle 20°. With high hardness and low friction coefficient these plastic gears can be used in various set-ups, even under water. Note Regarding the Machining Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 30mm stainless SKU: 64699530](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-30mm-stainless-sku-64699530/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 25mm stainless SKU: 64699525](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-25mm-stainless-sku-64699525/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 20mm stainless SKU: 64699520](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-20mm-stainless-sku-64699520/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 16mm stainless SKU: 64699516](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-16mm-stainless-sku-64699516/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 14mm stainless SKU: 64699514](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-14mm-stainless-sku-64699514/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 12mm stainless SKU: 64699512](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-12mm-stainless-sku-64699512/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 10mm stainless SKU: 64699510](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-10mm-stainless-sku-64699510/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 8mm stainless SKU: 64699508](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-8mm-stainless-sku-64699508/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 6mm stainless SKU: 64699506](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-6mm-stainless-sku-64699506/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Self-aligning linear bearing KB-3-A ISO series 3 premium stainless with seals for shaft Ø 50mm SKU: 64699250](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-stainless-with-seals-for-shaft-o-50mm-sku-64699250/): Stainless Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning linear bearing KB-3-A ISO series 3 premium stainless with seals for shaft Ø 40mm SKU: 64699240](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-stainless-with-seals-for-shaft-o-40mm-sku-64699240/): Stainless Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning linear bearing KB-3-A ISO series 3 premium stainless with seals for shaft Ø 30mm SKU: 64699230](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-stainless-with-seals-for-shaft-o-30mm-sku-64699230/): Stainless Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning linear bearing KB-3-A ISO series 3 premium stainless with seals for shaft Ø 25mm SKU: 64699225](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-stainless-with-seals-for-shaft-o-25mm-sku-64699225/): Stainless Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning linear bearing KB-3-A ISO series 3 premium stainless with seals for shaft Ø 20mm SKU: 64699220](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-stainless-with-seals-for-shaft-o-20mm-sku-64699220/): Stainless Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning linear bearing KB-3-A ISO series 3 premium stainless with seals for shaft Ø 16mm SKU: 64699216](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-stainless-with-seals-for-shaft-o-16mm-sku-64699216/): Stainless Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Self-aligning linear bearing KB-3-A ISO series 3 premium stainless with seals for shaft Ø 12mm SKU: 64699212](https://maedler.in/product/self-aligning-linear-bearing-kb-3-a-iso-series-3-premium-stainless-with-seals-for-shaft-o-12mm-sku-64699212/): Stainless Self-aligning linear bearings series 3 of ISO standard 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable. With wiping double-lip seals. These bearings are self-aligning up to +/- 0,5°. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with seals for shaft Ø 50mm SKU: 64699150](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-seals-for-shaft-o-50mm-sku-64699150/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With wiping double-lip seals. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with seals for shaft Ø 40mm SKU: 64699140](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-seals-for-shaft-o-40mm-sku-64699140/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With wiping double-lip seals. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with seals for shaft Ø 30mm SKU: 64699130](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-seals-for-shaft-o-30mm-sku-64699130/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With wiping double-lip seals. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with seals for shaft Ø 25mm SKU: 64699125](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-seals-for-shaft-o-25mm-sku-64699125/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With wiping double-lip seals. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with seals for shaft Ø 20mm SKU: 64699120](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-seals-for-shaft-o-20mm-sku-64699120/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With wiping double-lip seals. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with seals for shaft Ø 16mm SKU: 64699116](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-seals-for-shaft-o-16mm-sku-64699116/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With wiping double-lip seals. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with seals for shaft Ø 12mm SKU: 64699112](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-seals-for-shaft-o-12mm-sku-64699112/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With wiping double-lip seals. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with seals for shaft Ø 8mm SKU: 64699108](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-seals-for-shaft-o-8mm-sku-64699108/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With wiping double-lip seals. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with seals for shaft Ø 5mm SKU: 64699105](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-seals-for-shaft-o-5mm-sku-64699105/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With wiping double-lip seals. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with shields for shaft Ø 40mm SKU: 64699040](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-shields-for-shaft-o-40mm-sku-64699040/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With shields. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with shields for shaft Ø 30mm SKU: 64699030](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-shields-for-shaft-o-30mm-sku-64699030/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With shields. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with shields for shaft Ø 25mm SKU: 64699025](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-shields-for-shaft-o-25mm-sku-64699025/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With shields. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with shields for shaft Ø 20mm SKU: 64699020](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-shields-for-shaft-o-20mm-sku-64699020/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With shields. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with shields for shaft Ø 16mm SKU: 64699016](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-shields-for-shaft-o-16mm-sku-64699016/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With shields. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Linear ball bearing KB-3 ISO series 3 premium stainless with shields for shaft Ø 12mm SKU: 64699012](https://maedler.in/product/linear-ball-bearing-kb-3-iso-series-3-premium-stainless-with-shields-for-shaft-o-12mm-sku-64699012/): Stainless KB-3 linear bearings series 3 of ISO 10285 from premium brand in top quality. High load-bearing capacity, due to the asymmetric position of the rows of balls and the specially shaped raceway segments. These linear bearings can be fitted inside a closed or open housing and are thus adjustable.With shields. Bearings with FW 5mm must be lubricated before use. All other bearings are lubricated ready-to-install. Recommended shaft tolerance h6, housing tolerance H6. - [Quadro linear bearing unit KGQ-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 50mm open design SKU: 64695003](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-50mm-open-design-sku-64695003/): Material: Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Quadro linear bearing unit KGQ-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 50mm SKU: 64695002](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-50mm-sku-64695002/): Material: Material: Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open quadro linear bearing unit KGQ-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 50mm SKU: 64695001](https://maedler.in/product/open-quadro-linear-bearing-unit-kgq-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-50mm-sku-64695001/): Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 50mm SKU: 64695000](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-50mm-sku-64695000/): Material:Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 40mm open design SKU: 64694003](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-40mm-open-design-sku-64694003/): Material: Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Quadro linear bearing unit KGQ-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 40mm SKU: 64694002](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-40mm-sku-64694002/): Material: Material: Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open quadro linear bearing unit KGQ-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 40mm SKU: 64694001](https://maedler.in/product/open-quadro-linear-bearing-unit-kgq-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-40mm-sku-64694001/): Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 40mm SKU: 64694000](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-40mm-sku-64694000/): Material:Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 30mm open design SKU: 64693003](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-30mm-open-design-sku-64693003/): Material: Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Quadro linear bearing unit KGQ-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 30mm SKU: 64693002](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-30mm-sku-64693002/): Material: Material: Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open quadro linear bearing unit KGQ-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 30mm SKU: 64693001](https://maedler.in/product/open-quadro-linear-bearing-unit-kgq-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-30mm-sku-64693001/): Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 30mm SKU: 64693000](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-30mm-sku-64693000/): Material:Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 25mm open design SKU: 64692503](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-25mm-open-design-sku-64692503/): Material: Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Quadro linear bearing unit KGQ-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 25mm SKU: 64692502](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-25mm-sku-64692502/): Material: Material: Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open quadro linear bearing unit KGQ-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 25mm SKU: 64692501](https://maedler.in/product/open-quadro-linear-bearing-unit-kgq-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-25mm-sku-64692501/): Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 25mm SKU: 64692500](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-25mm-sku-64692500/): Material:Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 20mm open design SKU: 64692003](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-20mm-open-design-sku-64692003/): Material: Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Quadro linear bearing unit KGQ-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 20mm SKU: 64692002](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-20mm-sku-64692002/): Material: Material: Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open quadro linear bearing unit KGQ-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 20mm SKU: 64692001](https://maedler.in/product/open-quadro-linear-bearing-unit-kgq-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-20mm-sku-64692001/): Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 20mm SKU: 64692000](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-20mm-sku-64692000/): Material:Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 16mm open design SKU: 64691603](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-16mm-open-design-sku-64691603/): Material: Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Quadro linear bearing unit KGQ-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 16mm SKU: 64691602](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-16mm-sku-64691602/): Material: Material: Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open quadro linear bearing unit KGQ-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 16mm SKU: 64691601](https://maedler.in/product/open-quadro-linear-bearing-unit-kgq-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-16mm-sku-64691601/): Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 16mm SKU: 64691600](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-16mm-sku-64691600/): Material:Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 12mm open design SKU: 64691203](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-12mm-open-design-sku-64691203/): Material: Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Quadro linear bearing unit KGQ-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 12mm SKU: 64691202](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-12mm-sku-64691202/): Material: Material: Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open quadro linear bearing unit KGQ-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 12mm SKU: 64691201](https://maedler.in/product/open-quadro-linear-bearing-unit-kgq-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-12mm-sku-64691201/): Material: Housing made from extruded aluminium with four open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Quadro linear bearing unit KGQ-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 12mm SKU: 64691200](https://maedler.in/product/quadro-linear-bearing-unit-kgq-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-12mm-sku-64691200/): Material:Housing made from extruded aluminium with four closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 50mm SKU: 64685050](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-50mm-sku-64685050/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-STO ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 50mm open design SKU: 64685003S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-sto-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-50mm-open-design-sku-64685003s/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 50mm open design SKU: 64685003](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-50mm-open-design-sku-64685003/): Material: Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-ST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 50mm SKU: 64685002S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-st-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-50mm-sku-64685002s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 50mm SKU: 64685002](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-50mm-sku-64685002/): Material: Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open Tandem linear-bearing unit KGT-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 50mm SKU: 64685001](https://maedler.in/product/open-tandem-linear-bearing-unit-kgt-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-50mm-sku-64685001/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 50mm SKU: 64685000](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-50mm-sku-64685000/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 40mm SKU: 64684040](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-40mm-sku-64684040/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-STO ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 40mm open design SKU: 64684003S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-sto-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-40mm-open-design-sku-64684003s/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 40mm open design SKU: 64684003](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-40mm-open-design-sku-64684003/): Material: Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-ST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 40mm SKU: 64684002S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-st-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-40mm-sku-64684002s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 40mm SKU: 64684002](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-40mm-sku-64684002/): Material: Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open Tandem linear-bearing unit KGT-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 40mm SKU: 64684001](https://maedler.in/product/open-tandem-linear-bearing-unit-kgt-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-40mm-sku-64684001/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 40mm SKU: 64684000](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-40mm-sku-64684000/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 30mm SKU: 64683030](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-30mm-sku-64683030/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-STO ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 30mm open design SKU: 64683003S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-sto-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-30mm-open-design-sku-64683003s/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 30mm open design SKU: 64683003](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-30mm-open-design-sku-64683003/): Material: Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-ST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 30mm SKU: 64683002S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-st-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-30mm-sku-64683002s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 30mm SKU: 64683002](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-30mm-sku-64683002/): Material: Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open Tandem linear-bearing unit KGT-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 30mm SKU: 64683001](https://maedler.in/product/open-tandem-linear-bearing-unit-kgt-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-30mm-sku-64683001/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 30mm SKU: 64683000](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-30mm-sku-64683000/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 25mm SKU: 64682525](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-25mm-sku-64682525/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-STO ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 25mm open design SKU: 64682503S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-sto-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-25mm-open-design-sku-64682503s/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 25mm open design SKU: 64682503](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-25mm-open-design-sku-64682503/): Material: Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-ST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 25mm SKU: 64682502S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-st-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-25mm-sku-64682502s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 25mm SKU: 64682502](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-25mm-sku-64682502/): Material: Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open Tandem linear-bearing unit KGT-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 25mm SKU: 64682501](https://maedler.in/product/open-tandem-linear-bearing-unit-kgt-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-25mm-sku-64682501/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 25mm SKU: 64682500](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-25mm-sku-64682500/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 20mm SKU: 64682020](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-20mm-sku-64682020/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-STO ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 20mm open design SKU: 64682003S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-sto-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-20mm-open-design-sku-64682003s/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 20mm open design SKU: 64682003](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-20mm-open-design-sku-64682003/): Material: Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-ST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 20mm SKU: 64682002S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-st-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-20mm-sku-64682002s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 20mm SKU: 64682002](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-20mm-sku-64682002/): Material: Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open Tandem linear-bearing unit KGT-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 20mm SKU: 64682001](https://maedler.in/product/open-tandem-linear-bearing-unit-kgt-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-20mm-sku-64682001/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Tandem linear-bearing unit KGT-3 ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 20mm SKU: 64682000](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-20mm-sku-64682000/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Linear bearing unit KG-1-ST ISO series 1 with linear ball bearing KB-1-ST with with seals for shaft Ø 16mm SKU: 64681616](https://maedler.in/product/linear-bearing-unit-kg-1-st-iso-series-1-with-linear-ball-bearing-kb-1-st-with-with-seals-for-shaft-o-16mm-sku-64681616/): Material: Housing made from extruded aluminium with a compact linear bearing of the ISO Series 1 with steel jacket, in high quality. With integral double-lip seal.All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-STO ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 16mm open design SKU: 64681603S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-sto-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-16mm-open-design-sku-64681603s/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3-O ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 16mm open design SKU: 64681603](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-o-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-16mm-open-design-sku-64681603/): Material: Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Tandem linear bearing unit KGT-3-ST ISO series 3 with linear ball bearings with steel jacket with seals for shaft Ø 16mm SKU: 64681602S](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-st-iso-series-3-with-linear-ball-bearings-with-steel-jacket-with-seals-for-shaft-o-16mm-sku-64681602s/): Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3, with steel jacket and plastic cage. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6.* When mounting from the bottom side choose the next smaller screw size. - [Tandem linear bearing unit KGT-3 ISO series 3 Easy-Line with linear ball bearings with angular compensation with seals for shaft Ø 16mm SKU: 64681602](https://maedler.in/product/tandem-linear-bearing-unit-kgt-3-iso-series-3-easy-line-with-linear-ball-bearings-with-angular-compensation-with-seals-for-shaft-o-16mm-sku-64681602/): Material: Material: Housing made from extruded aluminium with two closed linear bearings of the ISO Series 3from reliable brand in good quality. Our Easy-Line bushes with swimming seals are very light running. Self-aligning capability that accommodates tilting. With seals. All bearings are lubricated ready-to-install. Recommended shaft tolerance h6. - [Open Tandem linear-bearing unit KGT-3-O ISO series 3 premium with linear ball bearings with angular compensation with double rubber seal for shaft Ø 16mm SKU: 64681601](https://maedler.in/product/open-tandem-linear-bearing-unit-kgt-3-o-iso-series-3-premium-with-linear-ball-bearings-with-angular-compensation-with-double-rubber-seal-for-shaft-o-16mm-sku-64681601/): Material: Housing made from extruded aluminium with two open linear bearings of the ISO Series 3 from premium brand in top quality, with self-aligning capability that accommodates tilting and double-lip seals. Lubricated ready-to-install. Recommended shaft tolerance h6. Spare linear bearing (that accommodates tilting) on request. * when mounting from the bottom side choose the next smaller screw size. - [Spur gear made of POM with hub module 1 60 teeth tooth width 10mm outside diameter 62mm SKU: 29306000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-60-teeth-tooth-width-10mm-outside-diameter-62mm-sku-29306000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 56 teeth tooth width 10mm outside diameter 58mm SKU: 29305600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-56-teeth-tooth-width-10mm-outside-diameter-58mm-sku-29305600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 55 teeth tooth width 10mm outside diameter 57mm SKU: 29305500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-55-teeth-tooth-width-10mm-outside-diameter-57mm-sku-29305500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 54 teeth tooth width 10mm outside diameter 56mm SKU: 29305400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-54-teeth-tooth-width-10mm-outside-diameter-56mm-sku-29305400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 52 teeth tooth width 10mm outside diameter 54mm SKU: 29305200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-52-teeth-tooth-width-10mm-outside-diameter-54mm-sku-29305200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 50 teeth tooth width 10mm outside diameter 52mm SKU: 29305000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-50-teeth-tooth-width-10mm-outside-diameter-52mm-sku-29305000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 48 teeth tooth width 10mm outside diameter 50mm SKU: 29304800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-48-teeth-tooth-width-10mm-outside-diameter-50mm-sku-29304800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 45 teeth tooth width 10mm outside diameter 47mm SKU: 29304500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-45-teeth-tooth-width-10mm-outside-diameter-47mm-sku-29304500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 42 teeth tooth width 10mm outside diameter 44mm SKU: 29304200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-42-teeth-tooth-width-10mm-outside-diameter-44mm-sku-29304200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 40 teeth tooth width 10mm outside diameter 42mm SKU: 29304000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-40-teeth-tooth-width-10mm-outside-diameter-42mm-sku-29304000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 38 teeth tooth width 10mm outside diameter 40mm SKU: 29303800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-38-teeth-tooth-width-10mm-outside-diameter-40mm-sku-29303800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 36 teeth tooth width 10mm outside diameter 38mm SKU: 29303600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-36-teeth-tooth-width-10mm-outside-diameter-38mm-sku-29303600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 35 teeth tooth width 10mm outside diameter 37mm SKU: 29303500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-35-teeth-tooth-width-10mm-outside-diameter-37mm-sku-29303500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 32 teeth tooth width 10mm outside diameter 34mm SKU: 29303200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-32-teeth-tooth-width-10mm-outside-diameter-34mm-sku-29303200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 30 teeth tooth width 10mm outside diameter 32mm SKU: 29303000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-30-teeth-tooth-width-10mm-outside-diameter-32mm-sku-29303000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 28 teeth tooth width 10mm outside diameter 30mm SKU: 29302800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-28-teeth-tooth-width-10mm-outside-diameter-30mm-sku-29302800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 27 teeth tooth width 10mm outside diameter 29mm SKU: 29302700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-27-teeth-tooth-width-10mm-outside-diameter-29mm-sku-29302700/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 26 teeth tooth width 10mm outside diameter 28mm SKU: 29302600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-26-teeth-tooth-width-10mm-outside-diameter-28mm-sku-29302600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 25 teeth tooth width 10mm outside diameter 27mm SKU: 29302500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-teeth-tooth-width-10mm-outside-diameter-27mm-sku-29302500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 24 teeth tooth width 10mm outside diameter 26mm SKU: 29302400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-24-teeth-tooth-width-10mm-outside-diameter-26mm-sku-29302400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 23 teeth tooth width 10mm outside diameter 25mm SKU: 29302300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-23-teeth-tooth-width-10mm-outside-diameter-25mm-sku-29302300/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 22 teeth tooth width 10mm outside diameter 24mm SKU: 29302200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-22-teeth-tooth-width-10mm-outside-diameter-24mm-sku-29302200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 21 teeth tooth width 10mm outside diameter 23mm SKU: 29302100](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-21-teeth-tooth-width-10mm-outside-diameter-23mm-sku-29302100/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 20 teeth tooth width 10mm outside diameter 22mm SKU: 29302000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-20-teeth-tooth-width-10mm-outside-diameter-22mm-sku-29302000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 19 teeth tooth width 10mm outside diameter 21mm SKU: 29301900](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-19-teeth-tooth-width-10mm-outside-diameter-21mm-sku-29301900/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 18 teeth tooth width 10mm outside diameter 20mm SKU: 29301800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-18-teeth-tooth-width-10mm-outside-diameter-20mm-sku-29301800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 17 teeth tooth width 10mm outside diameter 19mm SKU: 29301700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-17-teeth-tooth-width-10mm-outside-diameter-19mm-sku-29301700/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 16 teeth tooth width 10mm outside diameter 18mm SKU: 29301600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-16-teeth-tooth-width-10mm-outside-diameter-18mm-sku-29301600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 15 teeth tooth width 10mm outside diameter 17mm SKU: 29301500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-15-teeth-tooth-width-10mm-outside-diameter-17mm-sku-29301500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 14 teeth tooth width 10mm outside diameter 16mm SKU: 29301400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-14-teeth-tooth-width-10mm-outside-diameter-16mm-sku-29301400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 13 teeth tooth width 10mm outside diameter 15mm SKU: 29301300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-13-teeth-tooth-width-10mm-outside-diameter-15mm-sku-29301300/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 12 teeth tooth width 10mm outside diameter 14mm SKU: 29301200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-12-teeth-tooth-width-10mm-outside-diameter-14mm-sku-29301200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 11 teeth tooth width 10mm outside diameter 13mm SKU: 29301100](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-11-teeth-tooth-width-10mm-outside-diameter-13mm-sku-29301100/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 10 teeth tooth width 10mm outside diameter 12mm SKU: 29301000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-10-teeth-tooth-width-10mm-outside-diameter-12mm-sku-29301000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 120 teeth tooth width 5mm outside diameter 85.4mm SKU: 29212000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-120-teeth-tooth-width-5mm-outside-diameter-85-4mm-sku-29212000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 114 teeth tooth width 5mm outside diameter 81.2mm SKU: 29211400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-114-teeth-tooth-width-5mm-outside-diameter-81-2mm-sku-29211400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 100 teeth tooth width 5mm outside diameter 71.4mm SKU: 29210000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-100-teeth-tooth-width-5mm-outside-diameter-71-4mm-sku-29210000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 96 teeth tooth width 5mm outside diameter 68.6mm SKU: 29209600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-96-teeth-tooth-width-5mm-outside-diameter-68-6mm-sku-29209600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 90 teeth tooth width 5mm outside diameter 64.4mm SKU: 29209000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-90-teeth-tooth-width-5mm-outside-diameter-64-4mm-sku-29209000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 85 teeth tooth width 5mm outside diameter 60.9mm SKU: 29208500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-85-teeth-tooth-width-5mm-outside-diameter-60-9mm-sku-29208500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 80 teeth tooth width 5mm outside diameter 57.4mm SKU: 29208000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-80-teeth-tooth-width-5mm-outside-diameter-57-4mm-sku-29208000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 75 teeth tooth width 5mm outside diameter 53.9mm SKU: 29207500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-75-teeth-tooth-width-5mm-outside-diameter-53-9mm-sku-29207500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 72 teeth tooth width 5mm outside diameter 51.8mm SKU: 29207200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-72-teeth-tooth-width-5mm-outside-diameter-51-8mm-sku-29207200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 70 teeth tooth width 5mm outside diameter 50.4mm SKU: 29207000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-70-teeth-tooth-width-5mm-outside-diameter-50-4mm-sku-29207000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 65 teeth tooth width 5mm outside diameter 46.9mm SKU: 29206500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-65-teeth-tooth-width-5mm-outside-diameter-46-9mm-sku-29206500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 64 teeth tooth width 5mm outside diameter 46.2mm SKU: 29206400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-64-teeth-tooth-width-5mm-outside-diameter-46-2mm-sku-29206400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 60 teeth tooth width 5mm outside diameter 43.4mm SKU: 29206000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-60-teeth-tooth-width-5mm-outside-diameter-43-4mm-sku-29206000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 56 teeth tooth width 5mm outside diameter 40.6mm SKU: 29205600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-56-teeth-tooth-width-5mm-outside-diameter-40-6mm-sku-29205600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 55 teeth tooth width 5mm outside diameter 39.9mm SKU: 29205500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-55-teeth-tooth-width-5mm-outside-diameter-39-9mm-sku-29205500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 54 teeth tooth width 5mm outside diameter 39.2mm SKU: 29205400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-54-teeth-tooth-width-5mm-outside-diameter-39-2mm-sku-29205400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 52 teeth tooth width 5mm outside diameter 37.8mm SKU: 29205200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-52-teeth-tooth-width-5mm-outside-diameter-37-8mm-sku-29205200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 50 teeth tooth width 5mm outside diameter 36.4mm SKU: 29205000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-50-teeth-tooth-width-5mm-outside-diameter-36-4mm-sku-29205000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 48 teeth tooth width 5mm outside diameter 35mm SKU: 29204800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-48-teeth-tooth-width-5mm-outside-diameter-35mm-sku-29204800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 45 teeth tooth width 5mm outside diameter 32.9mm SKU: 29204500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-45-teeth-tooth-width-5mm-outside-diameter-32-9mm-sku-29204500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 42 teeth tooth width 5mm outside diameter 30.8mm SKU: 29204200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-42-teeth-tooth-width-5mm-outside-diameter-30-8mm-sku-29204200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 40 teeth tooth width 5mm outside diameter 29.4mm SKU: 29204000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-40-teeth-tooth-width-5mm-outside-diameter-29-4mm-sku-29204000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 38 teeth tooth width 5mm outside diameter 28mm SKU: 29203800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-38-teeth-tooth-width-5mm-outside-diameter-28mm-sku-29203800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 36 teeth tooth width 5mm outside diameter 26.6mm SKU: 29203600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-36-teeth-tooth-width-5mm-outside-diameter-26-6mm-sku-29203600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 35 teeth tooth width 5mm outside diameter 25.9mm SKU: 29203500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-35-teeth-tooth-width-5mm-outside-diameter-25-9mm-sku-29203500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 32 teeth tooth width 5mm outside diameter 23.8mm SKU: 29203200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-32-teeth-tooth-width-5mm-outside-diameter-23-8mm-sku-29203200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 30 teeth tooth width 5mm outside diameter 22.4mm SKU: 29203000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-30-teeth-tooth-width-5mm-outside-diameter-22-4mm-sku-29203000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 28 teeth tooth width 5mm outside diameter 21mm SKU: 29202800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-28-teeth-tooth-width-5mm-outside-diameter-21mm-sku-29202800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 27 teeth tooth width 5mm outside diameter 20.3mm SKU: 29202700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-27-teeth-tooth-width-5mm-outside-diameter-20-3mm-sku-29202700/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 26 teeth tooth width 5mm outside diameter 19.6mm SKU: 29202600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-26-teeth-tooth-width-5mm-outside-diameter-19-6mm-sku-29202600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 25 teeth tooth width 5mm outside diameter 18.9mm SKU: 29202500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-25-teeth-tooth-width-5mm-outside-diameter-18-9mm-sku-29202500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 24 teeth tooth width 5mm outside diameter 18.2mm SKU: 29202400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-24-teeth-tooth-width-5mm-outside-diameter-18-2mm-sku-29202400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 23 teeth tooth width 5mm outside diameter 17.5mm SKU: 29202300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-23-teeth-tooth-width-5mm-outside-diameter-17-5mm-sku-29202300/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 22 teeth tooth width 5mm outside diameter 16.8mm SKU: 29202200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-22-teeth-tooth-width-5mm-outside-diameter-16-8mm-sku-29202200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 21 teeth tooth width 5mm outside diameter 16.1mm SKU: 29202100](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-21-teeth-tooth-width-5mm-outside-diameter-16-1mm-sku-29202100/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 20 teeth tooth width 5mm outside diameter 15.4mm SKU: 29202000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-20-teeth-tooth-width-5mm-outside-diameter-15-4mm-sku-29202000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 19 teeth tooth width 5mm outside diameter 14.7mm SKU: 29201900](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-19-teeth-tooth-width-5mm-outside-diameter-14-7mm-sku-29201900/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 18 teeth tooth width 5mm outside diameter 14mm SKU: 29201800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-18-teeth-tooth-width-5mm-outside-diameter-14mm-sku-29201800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 17 teeth tooth width 5mm outside diameter 13.3mm SKU: 29201700](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-17-teeth-tooth-width-5mm-outside-diameter-13-3mm-sku-29201700/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 16 teeth tooth width 5mm outside diameter 12.6mm SKU: 29201600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-16-teeth-tooth-width-5mm-outside-diameter-12-6mm-sku-29201600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 15 teeth tooth width 5mm outside diameter 11.9mm SKU: 29201500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-15-teeth-tooth-width-5mm-outside-diameter-11-9mm-sku-29201500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 14 teeth tooth width 5mm outside diameter 11.2mm SKU: 29201400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-14-teeth-tooth-width-5mm-outside-diameter-11-2mm-sku-29201400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 13 teeth tooth width 5mm outside diameter 10.5mm SKU: 29201300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-13-teeth-tooth-width-5mm-outside-diameter-10-5mm-sku-29201300/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 12 teeth tooth width 5mm outside diameter 9.8mm SKU: 29201200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-12-teeth-tooth-width-5mm-outside-diameter-9-8mm-sku-29201200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.7 10 teeth tooth width 5mm outside diameter 8.4mm SKU: 29201000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-7-10-teeth-tooth-width-5mm-outside-diameter-8-4mm-sku-29201000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 120 teeth tooth width 4mm outside diameter 61mm SKU: 29112000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-120-teeth-tooth-width-4mm-outside-diameter-61mm-sku-29112000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 114 teeth tooth width 4mm outside diameter 58mm SKU: 29111400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-114-teeth-tooth-width-4mm-outside-diameter-58mm-sku-29111400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 100 teeth tooth width 4mm outside diameter 51mm SKU: 29110000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-100-teeth-tooth-width-4mm-outside-diameter-51mm-sku-29110000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 96 teeth tooth width 4mm outside diameter 49mm SKU: 29109600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-96-teeth-tooth-width-4mm-outside-diameter-49mm-sku-29109600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 90 teeth tooth width 4mm outside diameter 46mm SKU: 29109000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-90-teeth-tooth-width-4mm-outside-diameter-46mm-sku-29109000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 85 teeth tooth width 4mm outside diameter 43.5mm SKU: 29108500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-85-teeth-tooth-width-4mm-outside-diameter-43-5mm-sku-29108500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 80 teeth tooth width 4mm outside diameter 41mm SKU: 29108000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-80-teeth-tooth-width-4mm-outside-diameter-41mm-sku-29108000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 75 teeth tooth width 4mm outside diameter 38.5mm SKU: 29107500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-75-teeth-tooth-width-4mm-outside-diameter-38-5mm-sku-29107500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 72 teeth tooth width 4mm outside diameter 37mm SKU: 29107200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-72-teeth-tooth-width-4mm-outside-diameter-37mm-sku-29107200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 70 teeth tooth width 4mm outside diameter 36mm SKU: 29107000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-70-teeth-tooth-width-4mm-outside-diameter-36mm-sku-29107000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 65 teeth tooth width 4mm outside diameter 33.5mm SKU: 29106500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-65-teeth-tooth-width-4mm-outside-diameter-33-5mm-sku-29106500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 64 teeth tooth width 4mm outside diameter 33mm SKU: 29106400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-64-teeth-tooth-width-4mm-outside-diameter-33mm-sku-29106400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 60 teeth tooth width 4mm outside diameter 31mm SKU: 29106000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-60-teeth-tooth-width-4mm-outside-diameter-31mm-sku-29106000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 56 teeth tooth width 4mm outside diameter 29mm SKU: 29105600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-56-teeth-tooth-width-4mm-outside-diameter-29mm-sku-29105600/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 55 teeth tooth width 4mm outside diameter 28.5mm SKU: 29105500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-55-teeth-tooth-width-4mm-outside-diameter-28-5mm-sku-29105500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 54 teeth tooth width 4mm outside diameter 28mm SKU: 29105400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-54-teeth-tooth-width-4mm-outside-diameter-28mm-sku-29105400/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 52 teeth tooth width 4mm outside diameter 27mm SKU: 29105200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-52-teeth-tooth-width-4mm-outside-diameter-27mm-sku-29105200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 50 teeth tooth width 4mm outside diameter 26mm SKU: 29105000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-50-teeth-tooth-width-4mm-outside-diameter-26mm-sku-29105000/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 48 teeth tooth width 4mm outside diameter 25mm SKU: 29104800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-48-teeth-tooth-width-4mm-outside-diameter-25mm-sku-29104800/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 45 teeth tooth width 4mm outside diameter 23.5mm SKU: 29104500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-45-teeth-tooth-width-4mm-outside-diameter-23-5mm-sku-29104500/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 0.5 42 teeth tooth width 4mm outside diameter 22mm SKU: 29104200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-0-5-42-teeth-tooth-width-4mm-outside-diameter-22mm-sku-29104200/): Material: POM, white / nature, milled teeth. Tooth quality 10d DIN 58405. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Precision shaft steel with shaft support Ø 20h6 x 1200mm long SKU: 64742004](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-20h6-x-1200mm-long-sku-64742004/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel with shaft support Ø 20h6 x 600mm long SKU: 64742003](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-20h6-x-600mm-long-sku-64742003/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 20h6 x 1000mm long cutting surface marked with green paint SKU: 64742000](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-20h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64742000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shaft with shaft support low version Ø 16h6 x 1200mm long SKU: 64741606](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-16h6-x-1200mm-long-sku-64741606/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision steel shaft with shaft support low version Ø 16h6 x 600mm long SKU: 64741605](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-16h6-x-600mm-long-sku-64741605/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision shaft steel with shaft support Ø 16h6 x 1200mm long SKU: 64741604](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-16h6-x-1200mm-long-sku-64741604/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel with shaft support Ø 16h6 x 600mm long SKU: 64741603](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-16h6-x-600mm-long-sku-64741603/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 16h6 x 1000mm long cutting surface marked with green paint SKU: 64741600](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-16h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64741600/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 14h6 x 1000mm long cutting surface marked with green paint SKU: 64741400](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-14h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64741400/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shaft with shaft support low version Ø 12h6 x 1200mm long SKU: 64741206](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-12h6-x-1200mm-long-sku-64741206/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision steel shaft with shaft support low version Ø 12h6 x 600mm long SKU: 64741205](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-12h6-x-600mm-long-sku-64741205/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision shaft steel with shaft support Ø 12h6 x 1200mm long SKU: 64741204](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-12h6-x-1200mm-long-sku-64741204/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel with shaft support Ø 12h6 x 600mm long SKU: 64741203](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-12h6-x-600mm-long-sku-64741203/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 12h6 x 1000mm long cutting surface marked with green paint SKU: 64741200](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-12h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64741200/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 10h6 x 1000mm cutting surface marked with green paint SKU: 64741000](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-10h6-x-1000mm-cutting-surface-marked-with-green-paint-sku-64741000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 8h6 x 1000mm long cutting surface marked with green paint SKU: 64740800](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-8h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64740800/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 6h6 x 1000mm long cutting surface marked with green paint SKU: 64740600](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-6h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64740600/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 5h6 x 1000mm long cutting surface marked with green paint SKU: 64740500](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-5h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64740500/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 4h6 x 1000mm long cutting surface marked with green paint SKU: 64740401](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-4h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64740401/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel 100CR6 hardened min. 59 HRC and ground diameter 3h6 x 1000mm long cutting surface marked with green paint SKU: 64740301](https://maedler.in/product/precision-shaft-steel-100cr6-hardened-min-59-hrc-and-ground-diameter-3h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64740301/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 25h9 x 2000mm long SKU: 64722500](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-25h9-x-2000mm-long-sku-64722500/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 20h9 x 2000mm long SKU: 64722000](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-20h9-x-2000mm-long-sku-64722000/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 18h9 x 2000mm long SKU: 64721800](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-18h9-x-2000mm-long-sku-64721800/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 17h9 x 2000mm long SKU: 64721700](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-17h9-x-2000mm-long-sku-64721700/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 16h9 x 2000mm long SKU: 64721600](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-16h9-x-2000mm-long-sku-64721600/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 15h9 x 2000mm long SKU: 64721500](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-15h9-x-2000mm-long-sku-64721500/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 14h9 x 2000mm long SKU: 64721400](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-14h9-x-2000mm-long-sku-64721400/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 12h9 x 2000mm long SKU: 64721200](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-12h9-x-2000mm-long-sku-64721200/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 10h9 x 2000mm long SKU: 64721000](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-10h9-x-2000mm-long-sku-64721000/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 8h9 x 2000mm long SKU: 64720800](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-8h9-x-2000mm-long-sku-64720800/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 6h9 x 2000mm long SKU: 64720600](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-6h9-x-2000mm-long-sku-64720600/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 5h9 x 2000mm long SKU: 64720500](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-5h9-x-2000mm-long-sku-64720500/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 4h9 x 2000mm long SKU: 64720400](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-4h9-x-2000mm-long-sku-64720400/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 3h9 x 2000mm long SKU: 64720300](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-3h9-x-2000mm-long-sku-64720300/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 2h9 x 2000mm long SKU: 64720200](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-2h9-x-2000mm-long-sku-64720200/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 25h9 x 1000mm long SKU: 64712500](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-25h9-x-1000mm-long-sku-64712500/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 20h9 x 1000mm long SKU: 64712000](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-20h9-x-1000mm-long-sku-64712000/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 19h9 x 1000mm long SKU: 64711900](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-19h9-x-1000mm-long-sku-64711900/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 18h9 x 1000mm long SKU: 64711800](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-18h9-x-1000mm-long-sku-64711800/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 17h9 x 1000mm long SKU: 64711700](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-17h9-x-1000mm-long-sku-64711700/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 16h9 x 1000mm long SKU: 64711600](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-16h9-x-1000mm-long-sku-64711600/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 15h9 x 1000mm long SKU: 64711500](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-15h9-x-1000mm-long-sku-64711500/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 14h9 x 1000mm long SKU: 64711400](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-14h9-x-1000mm-long-sku-64711400/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 12h9 x 1000mm long SKU: 64711200](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-12h9-x-1000mm-long-sku-64711200/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 10h9 x 1000mm long SKU: 64711000](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-10h9-x-1000mm-long-sku-64711000/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 8h9 x 1000mm long SKU: 64710800](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-8h9-x-1000mm-long-sku-64710800/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 6h9 x 1000mm long SKU: 64710600](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-6h9-x-1000mm-long-sku-64710600/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 5h9 x 1000mm long SKU: 64710500](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-5h9-x-1000mm-long-sku-64710500/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 4h9 x 1000mm long SKU: 64710400](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-4h9-x-1000mm-long-sku-64710400/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 3,5h9 x 1000mm long SKU: 64710350](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-35h9-x-1000mm-long-sku-64710350/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 3h9 x 1000mm long SKU: 64710300](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-3h9-x-1000mm-long-sku-64710300/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 2h9 x 1000mm long SKU: 64710200](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-2h9-x-1000mm-long-sku-64710200/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 8h9 x 500mm long SKU: 64700800](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-8h9-x-500mm-long-sku-64700800/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 6h9 x 500mm long SKU: 64700600](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-6h9-x-500mm-long-sku-64700600/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 5h9 x 500mm long SKU: 64700500](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-5h9-x-500mm-long-sku-64700500/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 4h9 x 500mm long SKU: 64700400](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-4h9-x-500mm-long-sku-64700400/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 3,5h9 x 500mm long SKU: 64700350](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-35h9-x-500mm-long-sku-64700350/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 3h9 x 500mm long SKU: 64700300](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-3h9-x-500mm-long-sku-64700300/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Silver steel DIN 175 115CrV3 ground and polished diameter 2h9 x 500mm long SKU: 64700200](https://maedler.in/product/silver-steel-din-175-115crv3-ground-and-polished-diameter-2h9-x-500mm-long-sku-64700200/): Unhardened, strength 700 - 800 N/mm². Subsequent hardening of short silver steel workpieces up to 64 HRC is well possible. Fixed lengths can be delivered on request. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 50mm SKU: 64699950](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-50mm-sku-64699950/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 40mm SKU: 64699940](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-40mm-sku-64699940/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 30mm SKU: 64699930](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-30mm-sku-64699930/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 25mm SKU: 64699925](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-25mm-sku-64699925/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 20mm SKU: 64699920](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-20mm-sku-64699920/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 16mm SKU: 64699916](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-16mm-sku-64699916/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 14mm SKU: 64699914](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-14mm-sku-64699914/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 12mm SKU: 64699912](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-12mm-sku-64699912/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 10mm SKU: 64699910](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-10mm-sku-64699910/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 8mm SKU: 64699908](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-8mm-sku-64699908/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 6mm SKU: 64699906](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-6mm-sku-64699906/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 5mm SKU: 64699905](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-5mm-sku-64699905/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 4mm SKU: 64699904](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-4mm-sku-64699904/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with double rubber seal for shaft diameter 3mm SKU: 64699903](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-double-rubber-seal-for-shaft-diameter-3mm-sku-64699903/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6. * The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 50mm SKU: 64699850](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-50mm-sku-64699850/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 40mm SKU: 64699840](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-40mm-sku-64699840/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 30mm SKU: 64699830](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-30mm-sku-64699830/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 25mm SKU: 64699825](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-25mm-sku-64699825/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 20mm SKU: 64699820](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-20mm-sku-64699820/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 16mm SKU: 64699816](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-16mm-sku-64699816/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 14mm SKU: 64699814](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-14mm-sku-64699814/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 12mm SKU: 64699812](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-12mm-sku-64699812/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 10mm SKU: 64699810](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-10mm-sku-64699810/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 8mm SKU: 64699808](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-8mm-sku-64699808/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 6mm SKU: 64699806](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-6mm-sku-64699806/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 5mm SKU: 64699805](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-5mm-sku-64699805/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 4mm SKU: 64699804](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-4mm-sku-64699804/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing KB-1 stainless ISO series 1 premium with shields for shaft diameter 3mm SKU: 64699803](https://maedler.in/product/linear-ball-bearing-kb-1-stainless-iso-series-1-premium-with-shields-for-shaft-diameter-3mm-sku-64699803/): Stainless KB-1 linear bearings series 1 of ISO 10285 from premium brand in top quality. Compact dimensions enable a space-saving and cost efficient linear support. Easy to mount, automatic retention in the mounting bore. I.e., if the boring in the housing is exact, the bearing does not to be secured axially. Bearings with inner diameter up to 5mm must be lubricated before mounting. Recommended shaft tolerance h6, housing tolerance H6.* The load ratings are for use on hardened stainless steel shafts. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 50mm stainless SKU: 64699650](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-50mm-stainless-sku-64699650/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 40mm stainless SKU: 64699640](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-40mm-stainless-sku-64699640/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 30mm stainless SKU: 64699630](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-30mm-stainless-sku-64699630/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 25mm stainless SKU: 64699625](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-25mm-stainless-sku-64699625/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 20mm stainless SKU: 64699620](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-20mm-stainless-sku-64699620/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 16mm stainless SKU: 64699616](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-16mm-stainless-sku-64699616/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 14mm stainless SKU: 64699614](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-14mm-stainless-sku-64699614/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 12mm stainless SKU: 64699612](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-12mm-stainless-sku-64699612/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 10mm stainless SKU: 64699610](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-10mm-stainless-sku-64699610/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 8mm stainless SKU: 64699608](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-8mm-stainless-sku-64699608/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with double rubber seals for shaft diameter 6mm stainless SKU: 64699606](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-double-rubber-seals-for-shaft-diameter-6mm-stainless-sku-64699606/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 50mm stainless SKU: 64699550](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-50mm-stainless-sku-64699550/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [Linear ball bearing unit KG-1 ISO series 1 premium with shields for shaft diameter 40mm stainless SKU: 64699540](https://maedler.in/product/linear-ball-bearing-unit-kg-1-iso-series-1-premium-with-shields-for-shaft-diameter-40mm-stainless-sku-64699540/): Material: Housing made of extruded aluminium with a stainless steel linear bearing of the ISO Series 1 from premium brand in top quality. Either with integral double-lip seal or with shields. Lubricated ready-to-install. Recommended shaft tolerance h6. * when mounting from the bottom side choose the next smaller screw size.A = with shields. B = with seals. - [spur gear POM black with hub module 1,5 12 teeth tooth width 17mm outer diameter 21mm SKU: 29511012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-12-teeth-tooth-width-17mm-outer-diameter-21mm-sku-29511012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 10 teeth tooth width 17mm outer diameter 18mm SKU: 29511010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-10-teeth-tooth-width-17mm-outer-diameter-18mm-sku-29511010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 100 teeth tooth width 15mm outside diameter 153mm SKU: 29510000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-100-teeth-tooth-width-15mm-outside-diameter-153mm-sku-29510000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 90 teeth tooth width 15mm outside diameter 138mm SKU: 29509000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-90-teeth-tooth-width-15mm-outside-diameter-138mm-sku-29509000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 80 teeth tooth width 15mm outside diameter 123mm SKU: 29508000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-123mm-sku-29508000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1,5 75 teeth tooth width 15mm outside diameter 115,5mm SKU: 29507500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-15-75-teeth-tooth-width-15mm-outside-diameter-1155mm-sku-29507500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1,5 72 teeth tooth width 15mm outside diameter 111mm SKU: 29507200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-15-72-teeth-tooth-width-15mm-outside-diameter-111mm-sku-29507200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 70 teeth tooth width 15mm outside diameter 108mm SKU: 29507000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-108mm-sku-29507000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 65 teeth tooth width 15mm outside diameter 100.5mm SKU: 29506500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-65-teeth-tooth-width-15mm-outside-diameter-100-5mm-sku-29506500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 60 teeth tooth width 15mm outside diameter 93mm SKU: 29506000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-93mm-sku-29506000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 55 teeth tooth width 15mm outside diameter 85.5mm SKU: 29505500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-55-teeth-tooth-width-15mm-outside-diameter-85-5mm-sku-29505500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 50 teeth tooth width 15mm outside diameter 78mm SKU: 29505000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-78mm-sku-29505000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 48 teeth tooth width 15mm outside diameter 75mm SKU: 29504800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-75mm-sku-29504800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 45 teeth tooth width 15mm outside diameter 70.5mm SKU: 29504500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-70-5mm-sku-29504500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 42 teeth tooth width 15mm outside diameter 66mm SKU: 29504200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-42-teeth-tooth-width-15mm-outside-diameter-66mm-sku-29504200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 40 teeth tooth width 15mm outside diameter 63mm SKU: 29504000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-63mm-sku-29504000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 38 teeth tooth width 15mm outside diameter 60mm SKU: 29503800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-38-teeth-tooth-width-15mm-outside-diameter-60mm-sku-29503800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 36 teeth tooth width 15mm outside diameter 57mm SKU: 29503600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-36-teeth-tooth-width-15mm-outside-diameter-57mm-sku-29503600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 35 teeth tooth width 15mm outside diameter 55.5mm SKU: 29503500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-35-teeth-tooth-width-15mm-outside-diameter-55-5mm-sku-29503500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 32 teeth tooth width 15mm outside diameter 51mm SKU: 29503200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-32-teeth-tooth-width-15mm-outside-diameter-51mm-sku-29503200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 30 teeth tooth width 15mm outside diameter 48mm SKU: 29503000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-48mm-sku-29503000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 28 teeth tooth width 15mm outside diameter 45mm SKU: 29502800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-28-teeth-tooth-width-15mm-outside-diameter-45mm-sku-29502800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 25 teeth tooth width 15mm outside diameter 40.5mm SKU: 29502500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-40-5mm-sku-29502500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 24 teeth tooth width 15mm outside diameter 39mm SKU: 29502400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-24-teeth-tooth-width-15mm-outside-diameter-39mm-sku-29502400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 22 teeth tooth width 15mm outside diameter 36mm SKU: 29502200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-22-teeth-tooth-width-15mm-outside-diameter-36mm-sku-29502200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 20 teeth tooth width 15mm outside diameter 33mm SKU: 29502000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-20-teeth-tooth-width-15mm-outside-diameter-33mm-sku-29502000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 18 teeth tooth width 15mm outside diameter 30mm SKU: 29501800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-18-teeth-tooth-width-15mm-outside-diameter-30mm-sku-29501800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 16 teeth tooth width 15mm outside diameter 27mm SKU: 29501600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-16-teeth-tooth-width-15mm-outside-diameter-27mm-sku-29501600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 15 teeth tooth width 15mm outside diameter 25.5mm SKU: 29501500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-15-teeth-tooth-width-15mm-outside-diameter-25-5mm-sku-29501500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 14 teeth tooth width 15mm outside diameter 24mm SKU: 29501400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-14-teeth-tooth-width-15mm-outside-diameter-24mm-sku-29501400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 13 teeth tooth width 15mm outside diameter 22.5mm SKU: 29501300](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-13-teeth-tooth-width-15mm-outside-diameter-22-5mm-sku-29501300/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 12 teeth tooth width 15mm outside diameter 21mm SKU: 29501200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-12-teeth-tooth-width-15mm-outside-diameter-21mm-sku-29501200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 10 teeth tooth width 15mm outside diameter 18mm SKU: 29501000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-10-teeth-tooth-width-15mm-outside-diameter-18mm-sku-29501000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 50 teeth tooth width 10mm outside diameter 65mm SKU: 29405000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-50-teeth-tooth-width-10mm-outside-diameter-65mm-sku-29405000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 40 teeth tooth width 10mm outside diameter 52.5mm SKU: 29404000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-40-teeth-tooth-width-10mm-outside-diameter-52-5mm-sku-29404000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 38 teeth tooth width 10mm outside diameter 50mm SKU: 29403800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-38-teeth-tooth-width-10mm-outside-diameter-50mm-sku-29403800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 36 teeth tooth width 10mm outside diameter 47.5mm SKU: 29403600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-36-teeth-tooth-width-10mm-outside-diameter-47-5mm-sku-29403600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 35 teeth tooth width 10mm outside diameter 46.25mm SKU: 29403500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-35-teeth-tooth-width-10mm-outside-diameter-46-25mm-sku-29403500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 32 teeth tooth width 10mm outside diameter 42.5mm SKU: 29403200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-32-teeth-tooth-width-10mm-outside-diameter-42-5mm-sku-29403200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 30 teeth tooth width 10mm outside diameter 40mm SKU: 29403000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-30-teeth-tooth-width-10mm-outside-diameter-40mm-sku-29403000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 25 teeth tooth width 10mm outside diameter 33.75mm SKU: 29402500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-25-teeth-tooth-width-10mm-outside-diameter-33-75mm-sku-29402500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 24 teeth tooth width 10mm outside diameter 32.5mm SKU: 29402400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-24-teeth-tooth-width-10mm-outside-diameter-32-5mm-sku-29402400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 20 teeth tooth width 10mm outside diameter 27.5mm SKU: 29402000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-20-teeth-tooth-width-10mm-outside-diameter-27-5mm-sku-29402000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 18 teeth tooth width 10mm outside diameter 25mm SKU: 29401800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-18-teeth-tooth-width-10mm-outside-diameter-25mm-sku-29401800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 15 teeth tooth width 10mm outside diameter 21.25mm SKU: 29401500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-15-teeth-tooth-width-10mm-outside-diameter-21-25mm-sku-29401500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 14 teeth tooth width 10mm outside diameter 20mm SKU: 29401400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-14-teeth-tooth-width-10mm-outside-diameter-20mm-sku-29401400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 12 teeth tooth width 10mm outside diameter 17.5mm SKU: 29401200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-12-teeth-tooth-width-10mm-outside-diameter-17-5mm-sku-29401200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.25 10 teeth tooth width 10mm outside diameter 15mm SKU: 29401000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-25-10-teeth-tooth-width-10mm-outside-diameter-15mm-sku-29401000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 120 teeth tooth width 10mm outside diameter 122mm SKU: 29312000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-120-teeth-tooth-width-10mm-outside-diameter-122mm-sku-29312000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 120 teeth tooth width 15mm outer diameter 122mm SKU: 29311120](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-120-teeth-tooth-width-15mm-outer-diameter-122mm-sku-29311120/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 100 teeth tooth width 15mm outer diameter 102mm SKU: 29311100](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-100-teeth-tooth-width-15mm-outer-diameter-102mm-sku-29311100/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 90 teeth tooth width 15mm outer diameter 92mm SKU: 29311090](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-90-teeth-tooth-width-15mm-outer-diameter-92mm-sku-29311090/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 85 teeth tooth width 15mm outer diameter 87mm SKU: 29311085](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-85-teeth-tooth-width-15mm-outer-diameter-87mm-sku-29311085/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 80 teeth tooth width 15mm outer diameter 82mm SKU: 29311080](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-80-teeth-tooth-width-15mm-outer-diameter-82mm-sku-29311080/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 75 teeth tooth width 15mm outer diameter 77mm SKU: 29311075](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-75-teeth-tooth-width-15mm-outer-diameter-77mm-sku-29311075/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 72 teeth tooth width 15mm outer diameter 74mm SKU: 29311072](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-72-teeth-tooth-width-15mm-outer-diameter-74mm-sku-29311072/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 70 teeth tooth width 15mm outer diameter 72mm SKU: 29311070](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-70-teeth-tooth-width-15mm-outer-diameter-72mm-sku-29311070/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 65 teeth tooth width 15mm outer diameter 67mm SKU: 29311065](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-65-teeth-tooth-width-15mm-outer-diameter-67mm-sku-29311065/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 60 teeth tooth width 15mm outer diameter 62mm SKU: 29311060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-60-teeth-tooth-width-15mm-outer-diameter-62mm-sku-29311060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 56 teeth tooth width 15mm outer diameter 58mm SKU: 29311056](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-56-teeth-tooth-width-15mm-outer-diameter-58mm-sku-29311056/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 55 teeth tooth width 15mm outer diameter 57mm SKU: 29311055](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-55-teeth-tooth-width-15mm-outer-diameter-57mm-sku-29311055/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 52 teeth tooth width 15mm outer diameter 54mm SKU: 29311052](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-52-teeth-tooth-width-15mm-outer-diameter-54mm-sku-29311052/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 50 teeth tooth width 15mm outer diameter 52mm SKU: 29311050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-50-teeth-tooth-width-15mm-outer-diameter-52mm-sku-29311050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 48 teeth tooth width 15mm outer diameter 50mm SKU: 29311048](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-48-teeth-tooth-width-15mm-outer-diameter-50mm-sku-29311048/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 45 teeth tooth width 15mm outer diameter 47mm SKU: 29311045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-45-teeth-tooth-width-15mm-outer-diameter-47mm-sku-29311045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 42 teeth tooth width 15mm outer diameter 44mm SKU: 29311042](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-42-teeth-tooth-width-15mm-outer-diameter-44mm-sku-29311042/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 40 teeth tooth width 15mm outer diameter 42mm SKU: 29311040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-40-teeth-tooth-width-15mm-outer-diameter-42mm-sku-29311040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 38 teeth tooth width 15mm outer diameter 40mm SKU: 29311038](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-38-teeth-tooth-width-15mm-outer-diameter-40mm-sku-29311038/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 36 teeth tooth width 15mm outer diameter 38mm SKU: 29311036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-36-teeth-tooth-width-15mm-outer-diameter-38mm-sku-29311036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 35 teeth tooth width 15mm outer diameter 37mm SKU: 29311035](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-35-teeth-tooth-width-15mm-outer-diameter-37mm-sku-29311035/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 32 teeth tooth width 15mm outer diameter 34mm SKU: 29311032](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-32-teeth-tooth-width-15mm-outer-diameter-34mm-sku-29311032/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 30 teeth tooth width 15mm outer diameter 32mm SKU: 29311030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-30-teeth-tooth-width-15mm-outer-diameter-32mm-sku-29311030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 28 teeth tooth width 15mm outer diameter 30mm SKU: 29311028](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-28-teeth-tooth-width-15mm-outer-diameter-30mm-sku-29311028/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 27 teeth tooth width 15mm outer diameter 29mm SKU: 29311027](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-27-teeth-tooth-width-15mm-outer-diameter-29mm-sku-29311027/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 26 teeth tooth width 15mm outer diameter 28mm SKU: 29311026](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-26-teeth-tooth-width-15mm-outer-diameter-28mm-sku-29311026/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 25 teeth tooth width 15mm outer diameter 27mm SKU: 29311025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-25-teeth-tooth-width-15mm-outer-diameter-27mm-sku-29311025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 24 teeth tooth width 15mm outer diameter 26mm SKU: 29311024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-24-teeth-tooth-width-15mm-outer-diameter-26mm-sku-29311024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 23 teeth tooth width 15mm outer diameter 25mm SKU: 29311023](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-23-teeth-tooth-width-15mm-outer-diameter-25mm-sku-29311023/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 22 teeth tooth width 15mm outer diameter 24mm SKU: 29311022](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-22-teeth-tooth-width-15mm-outer-diameter-24mm-sku-29311022/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 21 teeth tooth width 15mm outer diameter 23mm SKU: 29311021](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-21-teeth-tooth-width-15mm-outer-diameter-23mm-sku-29311021/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 20 teeth tooth width 15mm outer diameter 22mm SKU: 29311020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-20-teeth-tooth-width-15mm-outer-diameter-22mm-sku-29311020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 19 teeth tooth width 15mm outer diameter 21mm SKU: 29311019](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-19-teeth-tooth-width-15mm-outer-diameter-21mm-sku-29311019/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 18 teeth tooth width 15mm outer diameter 20mm SKU: 29311018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-18-teeth-tooth-width-15mm-outer-diameter-20mm-sku-29311018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 17 teeth tooth width 15mm outer diameter 19mm SKU: 29311017](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-17-teeth-tooth-width-15mm-outer-diameter-19mm-sku-29311017/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 16 teeth tooth width 15mm outer diameter 18mm SKU: 29311016](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-16-teeth-tooth-width-15mm-outer-diameter-18mm-sku-29311016/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 15 teeth tooth width 15mm outer diameter 17mm SKU: 29311015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-15-teeth-tooth-width-15mm-outer-diameter-17mm-sku-29311015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 14 teeth tooth width 15mm outer diameter 16mm SKU: 29311014](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-14-teeth-tooth-width-15mm-outer-diameter-16mm-sku-29311014/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 13 teeth tooth width 15mm outer diameter 15mm SKU: 29311013](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-13-teeth-tooth-width-15mm-outer-diameter-15mm-sku-29311013/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 12 teeth tooth width 15mm outer diameter 14mm SKU: 29311012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-12-teeth-tooth-width-15mm-outer-diameter-14mm-sku-29311012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1 10 teeth tooth width 15mm outer diameter 12mm SKU: 29311010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-1-10-teeth-tooth-width-15mm-outer-diameter-12mm-sku-29311010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 100 teeth tooth width 10mm outside diameter 102mm SKU: 29310000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-100-teeth-tooth-width-10mm-outside-diameter-102mm-sku-29310000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 96 teeth tooth width 10mm outside diameter 98mm SKU: 29309600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-96-teeth-tooth-width-10mm-outside-diameter-98mm-sku-29309600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 90 teeth tooth width 10mm outside diameter 92mm SKU: 29309000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-90-teeth-tooth-width-10mm-outside-diameter-92mm-sku-29309000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 85 teeth tooth width 10mm outside diameter 87mm SKU: 29308500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-85-teeth-tooth-width-10mm-outside-diameter-87mm-sku-29308500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 80 teeth tooth width 10mm outside diameter 82mm SKU: 29308000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-80-teeth-tooth-width-10mm-outside-diameter-82mm-sku-29308000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 75 teeth tooth width 10mm outside diameter 77mm SKU: 29307500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-75-teeth-tooth-width-10mm-outside-diameter-77mm-sku-29307500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 72 teeth tooth width 10mm outside diameter 74mm SKU: 29307200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-72-teeth-tooth-width-10mm-outside-diameter-74mm-sku-29307200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 70 teeth tooth width 10mm outside diameter 72mm SKU: 29307000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-70-teeth-tooth-width-10mm-outside-diameter-72mm-sku-29307000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 65 teeth tooth width 10mm outside diameter 67mm SKU: 29306500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-65-teeth-tooth-width-10mm-outside-diameter-67mm-sku-29306500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1 64 teeth tooth width 10mm outside diameter 66mm SKU: 29306400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-64-teeth-tooth-width-10mm-outside-diameter-66mm-sku-29306400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [SKF cylindrical roller bearing NJ 204 ECP single row inner diameter 20mm outer diameter 47mm width 14mm SKU: 64775014](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-204-ecp-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sku-64775014/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 204 ECP single row inner diameter 20mm outer diameter 47mm width 14mm SKU: 64775013](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-204-ecp-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sku-64775013/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 203 ECP single row inner diameter 17mm outer diameter 40mm width 12mm SKU: 64775004](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-203-ecp-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sku-64775004/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 203 ECP single row inner diameter 17mm outer diameter 40mm width 12mm SKU: 64775003](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-203-ecp-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sku-64775003/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 202 ECP single row inner diameter 15mm outer diameter 35mm width 11mm SKU: 64775002](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-202-ecp-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sku-64775002/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 202 ECP single row inner diameter 15mm outer diameter 35mm width 11mm SKU: 64775001](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-202-ecp-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sku-64775001/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 50h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64775000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-50h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64775000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 40h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64774000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-40h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64774000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [SKF self aligning ball bearing 1210 ETN9/C3 double row inner diameter 50mm outer diameter 90mm width 20mm clearance C3 SKU: 64773390](https://maedler.in/product/skf-self-aligning-ball-bearing-1210-etn9-c3-double-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-clearance-c3-sku-64773390/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 1209 ETN9/C3 double row inner diameter 45mm outer diameter 85mm width 19mm clearance C3 SKU: 64773382](https://maedler.in/product/skf-self-aligning-ball-bearing-1209-etn9-c3-double-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-clearance-c3-sku-64773382/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 1208 ETN9/C3 double row inner diameter 40mm outer diameter 80mm width 18mm clearance C3 SKU: 64773372](https://maedler.in/product/skf-self-aligning-ball-bearing-1208-etn9-c3-double-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-clearance-c3-sku-64773372/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 2207 E-2RS1TN9/C3 double row inner diameter 35mm outer diameter 72mm width 23mm sealed clearance C3 SKU: 64773366](https://maedler.in/product/skf-self-aligning-ball-bearing-2207-e-2rs1tn9-c3-double-row-inner-diameter-35mm-outer-diameter-72mm-width-23mm-sealed-clearance-c3-sku-64773366/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 1207 ETN9/C3 double row inner diameter 35mm outer diameter 72mm width 17mm clearance C3 SKU: 64773364](https://maedler.in/product/skf-self-aligning-ball-bearing-1207-etn9-c3-double-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-clearance-c3-sku-64773364/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 1206 ETN9/C3 double row inner diameter 30mm outer diameter 62mm width 16mm clearance C3 SKU: 64773356](https://maedler.in/product/skf-self-aligning-ball-bearing-1206-etn9-c3-double-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-clearance-c3-sku-64773356/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 2205 E-2RS1TN9/C3 double row inner diameter 25mm outer diameter 52mm width 18mm sealed clearance C3 SKU: 64773350](https://maedler.in/product/skf-self-aligning-ball-bearing-2205-e-2rs1tn9-c3-double-row-inner-diameter-25mm-outer-diameter-52mm-width-18mm-sealed-clearance-c3-sku-64773350/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 1205 ETN9/C3 double row inner diameter 25mm outer diameter 52mm width 15mm clearance C3 SKU: 64773348](https://maedler.in/product/skf-self-aligning-ball-bearing-1205-etn9-c3-double-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-clearance-c3-sku-64773348/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 2204 E-2RS1TN9/C3 double row inner diameter 20mm outer diameter 47mm width 18mm sealed clearance C3 SKU: 64773342](https://maedler.in/product/skf-self-aligning-ball-bearing-2204-e-2rs1tn9-c3-double-row-inner-diameter-20mm-outer-diameter-47mm-width-18mm-sealed-clearance-c3-sku-64773342/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 1204 ETN9/C3 double row inner diameter 20mm outer diameter 47mm width 14mm clearance C3 SKU: 64773340](https://maedler.in/product/skf-self-aligning-ball-bearing-1204-etn9-c3-double-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-clearance-c3-sku-64773340/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 1203 ETN9/C3 double row inner diameter 17mm outer diameter 40mm width 12mm clearance C3 SKU: 64773332](https://maedler.in/product/skf-self-aligning-ball-bearing-1203-etn9-c3-double-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-clearance-c3-sku-64773332/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 2202 E-2RS1TN9/C3 double row inner diameter 15mm outer diameter 35mm width 14mm sealed clearance C3 SKU: 64773326](https://maedler.in/product/skf-self-aligning-ball-bearing-2202-e-2rs1tn9-c3-double-row-inner-diameter-15mm-outer-diameter-35mm-width-14mm-sealed-clearance-c3-sku-64773326/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 1202 ETN9/C3 double row inner diameter 15mm outer diameter 35mm width 11mm clearance C3 SKU: 64773324](https://maedler.in/product/skf-self-aligning-ball-bearing-1202-etn9-c3-double-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-clearance-c3-sku-64773324/): Material: Bearing steel.Self aligning ball bearings in premium-quality.- For middle-high, common axial and radial load.- Usable at angular displacement.- Usable for high speed.Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF self aligning ball bearing 2210 E-2RS1TN9 double row inner diameter 50mm outer diameter 90mm width 23mm sealed SKU: 64773092](https://maedler.in/product/skf-self-aligning-ball-bearing-2210-e-2rs1tn9-double-row-inner-diameter-50mm-outer-diameter-90mm-width-23mm-sealed-sku-64773092/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1210 ETN9 double row inner diameter 50mm outer diameter 90mm width 20mm SKU: 64773090](https://maedler.in/product/skf-self-aligning-ball-bearing-1210-etn9-double-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-sku-64773090/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2209 E-2RS1TN9 double row inner diameter 45mm outer diameter 85mm width 23mm sealed SKU: 64773084](https://maedler.in/product/skf-self-aligning-ball-bearing-2209-e-2rs1tn9-double-row-inner-diameter-45mm-outer-diameter-85mm-width-23mm-sealed-sku-64773084/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1209 ETN9 double row inner diameter 45mm outer diameter 85mm width 19mm SKU: 64773082](https://maedler.in/product/skf-self-aligning-ball-bearing-1209-etn9-double-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-sku-64773082/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2208 E-2RS1TN9 double row inner diameter 40mm outer diameter 80mm width 23mm sealed SKU: 64773074](https://maedler.in/product/skf-self-aligning-ball-bearing-2208-e-2rs1tn9-double-row-inner-diameter-40mm-outer-diameter-80mm-width-23mm-sealed-sku-64773074/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1208 ETN9 double row inner diameter 40mm outer diameter 80mm width 18mm SKU: 64773072](https://maedler.in/product/skf-self-aligning-ball-bearing-1208-etn9-double-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-sku-64773072/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2207 E-2RS1TN9 double row inner diameter 35mm outer diameter 72mm width 23mm sealed SKU: 64773066](https://maedler.in/product/skf-self-aligning-ball-bearing-2207-e-2rs1tn9-double-row-inner-diameter-35mm-outer-diameter-72mm-width-23mm-sealed-sku-64773066/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1207 ETN9 double row inner diameter 35mm outer diameter 72mm width 17mm SKU: 64773064](https://maedler.in/product/skf-self-aligning-ball-bearing-1207-etn9-double-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-sku-64773064/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2206 E-2RS1TN9 double row inner diameter 30mm outer diameter 62mm width 20mm sealed SKU: 64773058](https://maedler.in/product/skf-self-aligning-ball-bearing-2206-e-2rs1tn9-double-row-inner-diameter-30mm-outer-diameter-62mm-width-20mm-sealed-sku-64773058/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1206 ETN9 double row inner diameter 30mm outer diameter 62mm width 16mm SKU: 64773056](https://maedler.in/product/skf-self-aligning-ball-bearing-1206-etn9-double-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-sku-64773056/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2205 E-2RS1TN9 double row inner diameter 25mm outer diameter 52mm width 18mm sealed SKU: 64773050](https://maedler.in/product/skf-self-aligning-ball-bearing-2205-e-2rs1tn9-double-row-inner-diameter-25mm-outer-diameter-52mm-width-18mm-sealed-sku-64773050/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1205 ETN9 double row inner diameter 25mm outer diameter 52mm width 15mm SKU: 64773048](https://maedler.in/product/skf-self-aligning-ball-bearing-1205-etn9-double-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sku-64773048/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2204 E-2RS1TN9 double row inner diameter 20mm outer diameter 47mm width 18mm sealed SKU: 64773042](https://maedler.in/product/skf-self-aligning-ball-bearing-2204-e-2rs1tn9-double-row-inner-diameter-20mm-outer-diameter-47mm-width-18mm-sealed-sku-64773042/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1204 ETN9 double row inner diameter 20mm outer diameter 47mm width 14mm SKU: 64773040](https://maedler.in/product/skf-self-aligning-ball-bearing-1204-etn9-double-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sku-64773040/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2203 E-2RS1TN9 double row inner diameter 17mm outer diameter 40mm width 16mm sealed SKU: 64773034](https://maedler.in/product/skf-self-aligning-ball-bearing-2203-e-2rs1tn9-double-row-inner-diameter-17mm-outer-diameter-40mm-width-16mm-sealed-sku-64773034/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1203 ETN9 double row inner diameter 17mm outer diameter 40mm width 12mm SKU: 64773032](https://maedler.in/product/skf-self-aligning-ball-bearing-1203-etn9-double-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sku-64773032/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2202 E-2RS1TN9 double row inner diameter 15mm outer diameter 35mm width 14mm sealed SKU: 64773026](https://maedler.in/product/skf-self-aligning-ball-bearing-2202-e-2rs1tn9-double-row-inner-diameter-15mm-outer-diameter-35mm-width-14mm-sealed-sku-64773026/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1202 ETN9 double row inner diameter 15mm outer diameter 35mm width 11mm SKU: 64773024](https://maedler.in/product/skf-self-aligning-ball-bearing-1202-etn9-double-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sku-64773024/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2201 E-2RS1TN9 double row inner diameter 12mm outer diameter 32mm width 14mm sealed SKU: 64773018](https://maedler.in/product/skf-self-aligning-ball-bearing-2201-e-2rs1tn9-double-row-inner-diameter-12mm-outer-diameter-32mm-width-14mm-sealed-sku-64773018/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1201 ETN9 double row inner diameter 12mm outer diameter 32mm width 10mm SKU: 64773016](https://maedler.in/product/skf-self-aligning-ball-bearing-1201-etn9-double-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sku-64773016/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 2200 E-2RS1TN9 double row inner diameter 10mm outer diameter 30mm width 14mm sealed SKU: 64773014](https://maedler.in/product/skf-self-aligning-ball-bearing-2200-e-2rs1tn9-double-row-inner-diameter-10mm-outer-diameter-30mm-width-14mm-sealed-sku-64773014/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF self aligning ball bearing 1200 ETN9 double row inner diameter 10mm outer diameter 30mm width 9mm SKU: 64773012](https://maedler.in/product/skf-self-aligning-ball-bearing-1200-etn9-double-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sku-64773012/): Material: Bearing steel. Self aligning ball bearings in premium-quality. - For middle-high, common axial and radial load. - Usable at angular displacement. - Usable for high speed. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 30h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64773000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-30h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64773000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 25h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64772500](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-25h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64772500/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 20h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64772000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-20h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64772000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 16h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64771600](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-16h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64771600/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 14h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64771400](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-14h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64771400/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 12h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64771200](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-12h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64771200/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [SKF angular contact ball bearing 7206 BEP single row inner diameter 30mm outer diameter 62mm width 16mm SKU: 64771029](https://maedler.in/product/skf-angular-contact-ball-bearing-7206-bep-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-sku-64771029/): Material: Bearing steel. Angular contact ball bearings in premium-quality. - For common axial and radial load. - Usable for high speed. - Basic version for one bearing per bearing point (shaft end). - A second bearing point (opposite bearing) is required. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF angular contact ball bearing 7205 BEP single row inner diameter 25mm outer diameter 52mm width 15mm SKU: 64771022](https://maedler.in/product/skf-angular-contact-ball-bearing-7205-bep-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sku-64771022/): Material: Bearing steel. Angular contact ball bearings in premium-quality. - For common axial and radial load. - Usable for high speed. - Basic version for one bearing per bearing point (shaft end). - A second bearing point (opposite bearing) is required. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF angular contact ball bearing 7204 BEP single row inner diameter 20mm outer diameter 47mm width 14mm SKU: 64771013](https://maedler.in/product/skf-angular-contact-ball-bearing-7204-bep-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sku-64771013/): Material: Bearing steel. Angular contact ball bearings in premium-quality. - For common axial and radial load. - Usable for high speed. - Basic version for one bearing per bearing point (shaft end). - A second bearing point (opposite bearing) is required. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF angular contact ball bearing 7203 BEP single row inner diameter 17mm outer diameter 40mm width 12mm SKU: 64771008](https://maedler.in/product/skf-angular-contact-ball-bearing-7203-bep-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sku-64771008/): Material: Bearing steel. Angular contact ball bearings in premium-quality. - For common axial and radial load. - Usable for high speed. - Basic version for one bearing per bearing point (shaft end). - A second bearing point (opposite bearing) is required. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF angular contact ball bearing 7202 BEP single row inner diameter 15mm outer diameter 35mm width 11mm SKU: 64771005](https://maedler.in/product/skf-angular-contact-ball-bearing-7202-bep-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sku-64771005/): Material: Bearing steel. Angular contact ball bearings in premium-quality. - For common axial and radial load. - Usable for high speed. - Basic version for one bearing per bearing point (shaft end). - A second bearing point (opposite bearing) is required. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF angular contact ball bearing 7201 BEP single row inner diameter 12mm outer diameter 32mm width 10mm SKU: 64771002](https://maedler.in/product/skf-angular-contact-ball-bearing-7201-bep-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sku-64771002/): Material: Bearing steel. Angular contact ball bearings in premium-quality. - For common axial and radial load. - Usable for high speed. - Basic version for one bearing per bearing point (shaft end). - A second bearing point (opposite bearing) is required. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF angular contact ball bearing 7200 BEP single row inner diameter 10mm outer diameter 30mm width 9mm SKU: 64771001](https://maedler.in/product/skf-angular-contact-ball-bearing-7200-bep-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sku-64771001/): Material: Bearing steel. Angular contact ball bearings in premium-quality. - For common axial and radial load. - Usable for high speed. - Basic version for one bearing per bearing point (shaft end). - A second bearing point (opposite bearing) is required. Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 10h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64771000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-10h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64771000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 8h7 x 2000mm long chromated cutting surface marked with white paint SKU: 64770800](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-8h7-x-2000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64770800/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 50h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64765000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-50h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64765000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 40h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64764000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-40h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64764000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 30h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64763000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-30h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64763000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 25h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64762500](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-25h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64762500/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 20h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64762000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-20h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64762000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 16h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64761600](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-16h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64761600/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 14h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64761400](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-14h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64761400/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 12h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64761200](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-12h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64761200/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 10h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64761000](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-10h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64761000/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 8h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64760800](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-8h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64760800/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 6h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64760600](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-6h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64760600/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 Cr hardened min. 59 HRC and ground diameter 5h7 x 1000mm long chromated cutting surface marked with white paint SKU: 64760500](https://maedler.in/product/precision-steel-shafts-cf53-cr-hardened-min-59-hrc-and-ground-diameter-5h7-x-1000mm-long-chromated-cutting-surface-marked-with-white-paint-sku-64760500/): Material: Steel 1.1213 (CF53), hardness min. 59 HRC, chrome plated 10 µm. Chrome-hardness min. 800 HV, without CR(VI), suitable for food and medical industry. Diameter tolerance: ISO h7.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 50h6 x 2000mm long cutting surface marked with green paint SKU: 64755000](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-50h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64755000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 40h6 x 2000mm long cutting surface marked with green paint SKU: 64754000](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-40h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64754000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 30h6 x 2000mm long cutting surface marked with green paint SKU: 64753000](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-30h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64753000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 25h6 x 2000mm long cutting surface marked with green paint SKU: 64752500](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-25h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64752500/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 20h6 x 2000mm long cutting surface marked with green paint SKU: 64752000](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-20h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64752000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 16h6 x 2000mm long cutting surface marked with green paint SKU: 64751600](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-16h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64751600/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 14h6 x 2000mm long cutting surface marked with green paint SKU: 64751400](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-14h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64751400/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 hardened min. 59 HRC and ground diameter 12h6 x 2000mm long cutting surface marked with green paint SKU: 64751200](https://maedler.in/product/precision-steel-shafts-cf53-hardened-min-59-hrc-and-ground-diameter-12h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64751200/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 hardened min. 59 HRC and ground diameter 10h6 x 2000mm long cutting surface marked with green paint SKU: 64751000](https://maedler.in/product/precision-steel-shafts-cf53-hardened-min-59-hrc-and-ground-diameter-10h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64751000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shafts CF53 hardened min. 59 HRC and ground diameter 8h6 x 2000mm long cutting surface marked with green paint SKU: 64750800](https://maedler.in/product/precision-steel-shafts-cf53-hardened-min-59-hrc-and-ground-diameter-8h6-x-2000mm-long-cutting-surface-marked-with-green-paint-sku-64750800/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel with shaft support Ø 50h6 x 1200mm long SKU: 64745004](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-50h6-x-1200mm-long-sku-64745004/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel with shaft support Ø 50h6 x 600mm long SKU: 64745003](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-50h6-x-600mm-long-sku-64745003/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 50h6 x 1000mm long cutting surface marked with green paint SKU: 64745000](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-50h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64745000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shaft with shaft support low version Ø 40h6 x 1200mm long SKU: 64744006](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-40h6-x-1200mm-long-sku-64744006/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision steel shaft with shaft support low version Ø 40h6 x 600mm long SKU: 64744005](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-40h6-x-600mm-long-sku-64744005/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision shaft steel with shaft support Ø 40h6 x 1200mm long SKU: 64744004](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-40h6-x-1200mm-long-sku-64744004/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel with shaft support Ø 40h6 x 600mm long SKU: 64744003](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-40h6-x-600mm-long-sku-64744003/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 40h6 x 1000mm long cutting surface marked with green paint SKU: 64744000](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-40h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64744000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shaft with shaft support low version Ø 30h6 x 1200mm long SKU: 64743006](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-30h6-x-1200mm-long-sku-64743006/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision steel shaft with shaft support low version Ø 30h6 x 600mm long SKU: 64743005](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-30h6-x-600mm-long-sku-64743005/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision shaft steel with shaft support Ø 30h6 x 1200mm long SKU: 64743004](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-30h6-x-1200mm-long-sku-64743004/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel with shaft support Ø 30h6 x 600mm long SKU: 64743003](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-30h6-x-600mm-long-sku-64743003/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 30h6 x 1000mm long cutting surface marked with green paint SKU: 64743000](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-30h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64743000/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shaft with shaft support low version Ø 25h6 x 1200mm long SKU: 64742506](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-25h6-x-1200mm-long-sku-64742506/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision steel shaft with shaft support low version Ø 25h6 x 600mm long SKU: 64742505](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-25h6-x-600mm-long-sku-64742505/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision shaft steel with shaft support Ø 25h6 x 1200mm long SKU: 64742504](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-25h6-x-1200mm-long-sku-64742504/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel with shaft support Ø 25h6 x 600mm long SKU: 64742503](https://maedler.in/product/precision-shaft-steel-with-shaft-support-o-25h6-x-600mm-long-sku-64742503/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. Length: Either 600 mm or 1200 mm. Ready-to-use, mounted, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over their entire length. The shaft supports have mounting holes for mounting them on a base plate. Unit can be shortened by the customer using an angle grinder. Longer versions on request. - [Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 25h6 x 1000mm long cutting surface marked with green paint SKU: 64742500](https://maedler.in/product/precision-shaft-steel-cf53-hardened-min-59-hrc-and-ground-diameter-25h6-x-1000mm-long-cutting-surface-marked-with-green-paint-sku-64742500/): Material: Steel 1.1213 (CF53). Hardness min. 59 HRC. Ø 3mm made from material 100CR6. Diameter tolerance: ISO h6. Dimension-stable up to +120°C In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision steel shaft with shaft support low version Ø 20h6 x 1200mm long SKU: 64742006](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-20h6-x-1200mm-long-sku-64742006/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [Precision steel shaft with shaft support low version Ø 20h6 x 600mm long SKU: 64742005](https://maedler.in/product/precision-steel-shaft-with-shaft-support-low-version-o-20h6-x-600mm-long-sku-64742005/): Material: Steel 1.1213 (Cf53), hardened and ground, hardness 62±2 HRC, diameter tolerance ISO h6. Material support: Extruded aluminium. ength: Either 600 mm or 1200 mm. Delivery without mounting screws. Ready-to-install, supported linear shafts to be used with open linear bearings or open linear bearing units. The shafts are supported over the entire length. Unit can be shortened by the customer using an angle grinder. The shaft supports have internal threads to get mounted from the downside of the customer´s base plate. The required screw lenght depends also on the thickness of the base plate. Longer versions on request. - [spur gear POM black with hub module 2,5 12 teeth tooth width 25mm outer diameter 35mm SKU: 29711012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-12-teeth-tooth-width-25mm-outer-diameter-35mm-sku-29711012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 10 teeth tooth width 25mm outer diameter 30mm SKU: 29711010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-10-teeth-tooth-width-25mm-outer-diameter-30mm-sku-29711010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 100 teeth tooth width 20mm outside diameter 255mm SKU: 29710000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-100-teeth-tooth-width-20mm-outside-diameter-255mm-sku-29710000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 90 teeth tooth width 20mm outside diameter 230mm SKU: 29709000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-90-teeth-tooth-width-20mm-outside-diameter-230mm-sku-29709000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 80 teeth tooth width 20mm outside diameter 205mm SKU: 29708000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-80-teeth-tooth-width-20mm-outside-diameter-205mm-sku-29708000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 72 teeth tooth width 20mm outside diameter 185mm SKU: 29707200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-72-teeth-tooth-width-20mm-outside-diameter-185mm-sku-29707200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 60 teeth tooth width 20mm outside diameter 155mm SKU: 29706000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-60-teeth-tooth-width-20mm-outside-diameter-155mm-sku-29706000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 56 teeth tooth width 20mm outside diameter 145mm SKU: 29705600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-56-teeth-tooth-width-20mm-outside-diameter-145mm-sku-29705600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 50 teeth tooth width 20mm outside diameter 130mm SKU: 29705000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-50-teeth-tooth-width-20mm-outside-diameter-130mm-sku-29705000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 45 teeth tooth width 20mm outside diameter 117.5mm SKU: 29704500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-45-teeth-tooth-width-20mm-outside-diameter-117-5mm-sku-29704500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 40 teeth tooth width 20mm outside diameter 105mm SKU: 29704000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-40-teeth-tooth-width-20mm-outside-diameter-105mm-sku-29704000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 36 teeth tooth width 20mm outside diameter 95mm SKU: 29703600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-36-teeth-tooth-width-20mm-outside-diameter-95mm-sku-29703600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 35 teeth tooth width 20mm outside diameter 92,5mm SKU: 29703500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-35-teeth-tooth-width-20mm-outside-diameter-925mm-sku-29703500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 30 teeth tooth width 20mm outside diameter 80mm SKU: 29703000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-30-teeth-tooth-width-20mm-outside-diameter-80mm-sku-29703000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 28 teeth tooth width 20mm outside diameter 75mm SKU: 29702800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-28-teeth-tooth-width-20mm-outside-diameter-75mm-sku-29702800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm SKU: 29702500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-25-teeth-tooth-width-20mm-outside-diameter-67-5mm-sku-29702500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 24 teeth tooth width 20mm outside diameter 65mm SKU: 29702400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-24-teeth-tooth-width-20mm-outside-diameter-65mm-sku-29702400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 20 teeth tooth width 20mm outside diameter 55mm SKU: 29702000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-20-teeth-tooth-width-20mm-outside-diameter-55mm-sku-29702000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 18 teeth tooth width 20mm outside diameter 50mm SKU: 29701800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-18-teeth-tooth-width-20mm-outside-diameter-50mm-sku-29701800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 16 teeth tooth width 20mm outside diameter 45mm SKU: 29701600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-16-teeth-tooth-width-20mm-outside-diameter-45mm-sku-29701600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 15 teeth tooth width 20mm outside diameter 42.5mm SKU: 29701500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-15-teeth-tooth-width-20mm-outside-diameter-42-5mm-sku-29701500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 14 teeth tooth width 20mm outside diameter 40mm SKU: 29701400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-14-teeth-tooth-width-20mm-outside-diameter-40mm-sku-29701400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 12 teeth tooth width 20mm outside diameter 35mm SKU: 29701200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-12-teeth-tooth-width-20mm-outside-diameter-35mm-sku-29701200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2.5 10 teeth tooth width 20mm outside diameter 30mm SKU: 29701000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-5-10-teeth-tooth-width-20mm-outside-diameter-30mm-sku-29701000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 120 teeth tooth width 16mm outside diameter 244mm SKU: 29612000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-120-teeth-tooth-width-16mm-outside-diameter-244mm-sku-29612000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 90 teeth tooth width 20mm outer diameter 184mm SKU: 29611090](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-90-teeth-tooth-width-20mm-outer-diameter-184mm-sku-29611090/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 80 teeth tooth width 20mm outer diameter 164mm SKU: 29611080](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-80-teeth-tooth-width-20mm-outer-diameter-164mm-sku-29611080/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 72 teeth tooth width 20mm outer diameter 148mm SKU: 29611072](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-72-teeth-tooth-width-20mm-outer-diameter-148mm-sku-29611072/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 70 teeth tooth width 20mm outer diameter 144mm SKU: 29611070](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-70-teeth-tooth-width-20mm-outer-diameter-144mm-sku-29611070/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 60 teeth tooth width 20mm outer diameter 124mm SKU: 29611060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-60-teeth-tooth-width-20mm-outer-diameter-124mm-sku-29611060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 50 teeth tooth width 20mm outer diameter 104mm SKU: 29611050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-50-teeth-tooth-width-20mm-outer-diameter-104mm-sku-29611050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 45 teeth tooth width 20mm outer diameter 94mm SKU: 29611045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-45-teeth-tooth-width-20mm-outer-diameter-94mm-sku-29611045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 40 teeth tooth width 20mm outer diameter 84mm SKU: 29611040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-40-teeth-tooth-width-20mm-outer-diameter-84mm-sku-29611040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 36 teeth tooth width 20mm outer diameter 76mm SKU: 29611036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-36-teeth-tooth-width-20mm-outer-diameter-76mm-sku-29611036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 35 teeth tooth width 20mm outer diameter 74mm SKU: 29611035](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-35-teeth-tooth-width-20mm-outer-diameter-74mm-sku-29611035/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 32 teeth tooth width 20mm outer diameter 68mm SKU: 29611032](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-32-teeth-tooth-width-20mm-outer-diameter-68mm-sku-29611032/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 30 teeth tooth width 20mm outer diameter 64mm SKU: 29611030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-30-teeth-tooth-width-20mm-outer-diameter-64mm-sku-29611030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 25 teeth tooth width 20mm outer diameter 54mm SKU: 29611025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-25-teeth-tooth-width-20mm-outer-diameter-54mm-sku-29611025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 24 teeth tooth width 20mm outer diameter 52mm SKU: 29611024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-24-teeth-tooth-width-20mm-outer-diameter-52mm-sku-29611024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 20 teeth tooth width 20mm outer diameter 44mm SKU: 29611020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-20-teeth-tooth-width-20mm-outer-diameter-44mm-sku-29611020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 18 teeth tooth width 20mm outer diameter 40mm SKU: 29611018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-18-teeth-tooth-width-20mm-outer-diameter-40mm-sku-29611018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 16 teeth tooth width 20mm outer diameter 36mm SKU: 29611016](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-16-teeth-tooth-width-20mm-outer-diameter-36mm-sku-29611016/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 15 teeth tooth width 20mm outer diameter 34mm SKU: 29611015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-15-teeth-tooth-width-20mm-outer-diameter-34mm-sku-29611015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 14 teeth tooth width 20mm outer diameter 32mm SKU: 29611014](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-14-teeth-tooth-width-20mm-outer-diameter-32mm-sku-29611014/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 12 teeth tooth width 20mm outer diameter 28mm SKU: 29611012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-12-teeth-tooth-width-20mm-outer-diameter-28mm-sku-29611012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2 10 teeth tooth width 20mm outer diameter 24mm SKU: 29611010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-2-10-teeth-tooth-width-20mm-outer-diameter-24mm-sku-29611010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 100 teeth tooth width 16mm outside diameter 204mm SKU: 29610000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-100-teeth-tooth-width-16mm-outside-diameter-204mm-sku-29610000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 90 teeth tooth width 16mm outside diameter 184mm SKU: 29609000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-90-teeth-tooth-width-16mm-outside-diameter-184mm-sku-29609000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 80 teeth tooth width 16mm outside diameter 164mm SKU: 29608000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-80-teeth-tooth-width-16mm-outside-diameter-164mm-sku-29608000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 75 teeth tooth width 16mm outside diameter 154mm SKU: 29607500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-75-teeth-tooth-width-16mm-outside-diameter-154mm-sku-29607500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 72 teeth tooth width 16mm outside diameter 148mm SKU: 29607200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-72-teeth-tooth-width-16mm-outside-diameter-148mm-sku-29607200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 70 teeth tooth width 16mm outside diameter 144mm SKU: 29607000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-70-teeth-tooth-width-16mm-outside-diameter-144mm-sku-29607000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 60 teeth tooth width 16mm outside diameter 124mm SKU: 29606000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-60-teeth-tooth-width-16mm-outside-diameter-124mm-sku-29606000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 56 teeth tooth width 16mm outside diameter 116mm SKU: 29605600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-56-teeth-tooth-width-16mm-outside-diameter-116mm-sku-29605600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 50 teeth tooth width 16mm outside diameter 104mm SKU: 29605000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-50-teeth-tooth-width-16mm-outside-diameter-104mm-sku-29605000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 45 teeth tooth width 16mm outside diameter 94mm SKU: 29604500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-45-teeth-tooth-width-16mm-outside-diameter-94mm-sku-29604500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 40 teeth tooth width 16mm outside diameter 84mm SKU: 29604000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-40-teeth-tooth-width-16mm-outside-diameter-84mm-sku-29604000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 36 teeth tooth width 16mm outside diameter 76mm SKU: 29603600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-36-teeth-tooth-width-16mm-outside-diameter-76mm-sku-29603600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 35 teeth tooth width 16mm outside diameter 74mm SKU: 29603500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-35-teeth-tooth-width-16mm-outside-diameter-74mm-sku-29603500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 32 teeth tooth width 16mm outside diameter 68mm SKU: 29603200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-32-teeth-tooth-width-16mm-outside-diameter-68mm-sku-29603200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 30 teeth tooth width 16mm outside diameter 64mm SKU: 29603000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-30-teeth-tooth-width-16mm-outside-diameter-64mm-sku-29603000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 28 teeth tooth width 16mm outside diameter 60mm SKU: 29602800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-28-teeth-tooth-width-16mm-outside-diameter-60mm-sku-29602800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 25 teeth tooth width 16mm outside diameter 54mm SKU: 29602500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-25-teeth-tooth-width-16mm-outside-diameter-54mm-sku-29602500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 24 teeth tooth width 16mm outside diameter 52mm SKU: 29602400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-24-teeth-tooth-width-16mm-outside-diameter-52mm-sku-29602400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 20 teeth tooth width 16mm outside diameter 44mm SKU: 29602000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-20-teeth-tooth-width-16mm-outside-diameter-44mm-sku-29602000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 18 teeth tooth width 16mm outside diameter 40mm SKU: 29601800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-18-teeth-tooth-width-16mm-outside-diameter-40mm-sku-29601800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 16 teeth tooth width 16mm outside diameter 36mm SKU: 29601600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-16-teeth-tooth-width-16mm-outside-diameter-36mm-sku-29601600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 15 teeth tooth width 16mm outside diameter 34mm SKU: 29601500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-15-teeth-tooth-width-16mm-outside-diameter-34mm-sku-29601500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 14 teeth tooth width 16mm outside diameter 32mm SKU: 29601400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-14-teeth-tooth-width-16mm-outside-diameter-32mm-sku-29601400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 12 teeth tooth width 16mm outside diameter 28mm SKU: 29601200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-12-teeth-tooth-width-16mm-outside-diameter-28mm-sku-29601200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2 10 teeth tooth width 16mm outside diameter 24mm SKU: 29601000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-2-10-teeth-tooth-width-16mm-outside-diameter-24mm-sku-29601000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 1.5 120 teeth tooth width 15mm outside diameter 183mm SKU: 29512000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-1-5-120-teeth-tooth-width-15mm-outside-diameter-183mm-sku-29512000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 120 teeth tooth width 17mm outer diameter 183mm SKU: 29511120](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-120-teeth-tooth-width-17mm-outer-diameter-183mm-sku-29511120/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 100 teeth tooth width 17mm outer diameter 153mm SKU: 29511100](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-100-teeth-tooth-width-17mm-outer-diameter-153mm-sku-29511100/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 90 teeth tooth width 17mm outer diameter 138mm SKU: 29511090](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-90-teeth-tooth-width-17mm-outer-diameter-138mm-sku-29511090/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 80 teeth tooth width 17mm outer diameter 123mm SKU: 29511080](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-80-teeth-tooth-width-17mm-outer-diameter-123mm-sku-29511080/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 72 teeth tooth width 17mm outer diameter 111mm SKU: 29511072](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-72-teeth-tooth-width-17mm-outer-diameter-111mm-sku-29511072/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 70 teeth tooth width 17mm outer diameter 108mm SKU: 29511070](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-70-teeth-tooth-width-17mm-outer-diameter-108mm-sku-29511070/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 60 teeth tooth width 17mm outer diameter 93mm SKU: 29511060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-60-teeth-tooth-width-17mm-outer-diameter-93mm-sku-29511060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 56 teeth tooth width 17mm outer diameter 87mm SKU: 29511056](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-56-teeth-tooth-width-17mm-outer-diameter-87mm-sku-29511056/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 55 teeth tooth width 17mm outer diameter 85,5mm SKU: 29511055](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-55-teeth-tooth-width-17mm-outer-diameter-855mm-sku-29511055/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 50 teeth tooth width 17mm outer diameter 78mm SKU: 29511050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-50-teeth-tooth-width-17mm-outer-diameter-78mm-sku-29511050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 48 teeth tooth width 17mm outer diameter 75mm SKU: 29511048](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-48-teeth-tooth-width-17mm-outer-diameter-75mm-sku-29511048/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 45 teeth tooth width 17mm outer diameter 70,5mm SKU: 29511045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-45-teeth-tooth-width-17mm-outer-diameter-705mm-sku-29511045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 42 teeth tooth width 17mm outer diameter 66mm SKU: 29511042](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-42-teeth-tooth-width-17mm-outer-diameter-66mm-sku-29511042/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 40 teeth tooth width 17mm outer diameter 63mm SKU: 29511040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-40-teeth-tooth-width-17mm-outer-diameter-63mm-sku-29511040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 38 teeth tooth width 17mm outer diameter 60mm SKU: 29511038](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-38-teeth-tooth-width-17mm-outer-diameter-60mm-sku-29511038/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 36 teeth tooth width 17mm outer diameter 57mm SKU: 29511036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-36-teeth-tooth-width-17mm-outer-diameter-57mm-sku-29511036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 35 teeth tooth width 17mm outer diameter 55,5mm SKU: 29511035](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-35-teeth-tooth-width-17mm-outer-diameter-555mm-sku-29511035/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 32 teeth tooth width 17mm outer diameter 51mm SKU: 29511032](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-32-teeth-tooth-width-17mm-outer-diameter-51mm-sku-29511032/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 30 teeth tooth width 17mm outer diameter 48mm SKU: 29511030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-30-teeth-tooth-width-17mm-outer-diameter-48mm-sku-29511030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 28 teeth tooth width 17mm outer diameter 45mm SKU: 29511028](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-28-teeth-tooth-width-17mm-outer-diameter-45mm-sku-29511028/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 25 teeth tooth width 17mm outer diameter 40,5mm SKU: 29511025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-25-teeth-tooth-width-17mm-outer-diameter-405mm-sku-29511025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 24 teeth tooth width 17mm outer diameter 39mm SKU: 29511024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-24-teeth-tooth-width-17mm-outer-diameter-39mm-sku-29511024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 22 teeth tooth width 17mm outer diameter 36mm SKU: 29511022](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-22-teeth-tooth-width-17mm-outer-diameter-36mm-sku-29511022/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 20 teeth tooth width 17mm outer diameter 33mm SKU: 29511020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-20-teeth-tooth-width-17mm-outer-diameter-33mm-sku-29511020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 18 teeth tooth width 17mm outer diameter 30mm SKU: 29511018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-18-teeth-tooth-width-17mm-outer-diameter-30mm-sku-29511018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 16 teeth tooth width 17mm outer diameter 27mm SKU: 29511016](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-16-teeth-tooth-width-17mm-outer-diameter-27mm-sku-29511016/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 15 teeth tooth width 17mm outer diameter 25,5mm SKU: 29511015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-15-teeth-tooth-width-17mm-outer-diameter-255mm-sku-29511015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 1,5 14 teeth tooth width 17mm outer diameter 24mm SKU: 29511014](https://maedler.in/product/spur-gear-pom-black-with-hub-module-15-14-teeth-tooth-width-17mm-outer-diameter-24mm-sku-29511014/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Eccentric bolt LFE5 dw 4/6mm bolt diameter 5mm length 19.5mm SKU: 64780401](https://maedler.in/product/eccentric-bolt-lfe5-dw-4-6mm-bolt-diameter-5mm-length-19-5mm-sku-64780401/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ40x107A1 dw 40mm bolt diameter 40mm length 117mm SKU: 64780312](https://maedler.in/product/centric-bolt-lfz40x107a1-dw-40mm-bolt-diameter-40mm-length-117mm-sku-64780312/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ30x95A1 dw 30mm bolt diameter 30mm length 107mm SKU: 64780311](https://maedler.in/product/centric-bolt-lfz30x95a1-dw-30mm-bolt-diameter-30mm-length-107mm-sku-64780311/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ25x82A1 dw 20/25mm bolt diameter 25mm length 92mm SKU: 64780309](https://maedler.in/product/centric-bolt-lfz25x82a1-dw-20-25mm-bolt-diameter-25mm-length-92mm-sku-64780309/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ20x67A1 dw 16mm bolt diameter 20mm length 75mm SKU: 64780308](https://maedler.in/product/centric-bolt-lfz20x67a1-dw-16mm-bolt-diameter-20mm-length-75mm-sku-64780308/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ12x45A1 dw 12mm bolt diameter 12mm length 50mm SKU: 64780307](https://maedler.in/product/centric-bolt-lfz12x45a1-dw-12mm-bolt-diameter-12mm-length-50mm-sku-64780307/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ15 dw 10mm bolt diameter 15mm length 50.8mm SKU: 64780306](https://maedler.in/product/centric-bolt-lfz15-dw-10mm-bolt-diameter-15mm-length-50-8mm-sku-64780306/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ12/M12 dw 10mm bolt diameter 12mm length 50.8mm SKU: 64780305](https://maedler.in/product/centric-bolt-lfz12-m12-dw-10mm-bolt-diameter-12mm-length-50-8mm-sku-64780305/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ12 dw 10mm bolt diameter 12mm length 43mm SKU: 64780304](https://maedler.in/product/centric-bolt-lfz12-dw-10mm-bolt-diameter-12mm-length-43mm-sku-64780304/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ8 dw 6mm bolt diameter 8mm length 28.3mm SKU: 64780303](https://maedler.in/product/centric-bolt-lfz8-dw-6mm-bolt-diameter-8mm-length-28-3mm-sku-64780303/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Centric bolt LFZ5 dw 4/6mm bolt diameter 5mm length 19.5mm SKU: 64780301](https://maedler.in/product/centric-bolt-lfz5-dw-4-6mm-bolt-diameter-5mm-length-19-5mm-sku-64780301/): Material: Heat-treated steel, black oxide finish.• Centric bolt for mounting profil track rollers on fixed position.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Track roller LFR5208-40-2RS dw 40mm inner diameter 40mm outer diameter 98mm SKU: 64780212](https://maedler.in/product/track-roller-lfr5208-40-2rs-dw-40mm-inner-diameter-40mm-outer-diameter-98mm-sku-64780212/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5207-30-2RS dw 30mm inner diameter 30mm outer diameter 80mm SKU: 64780211](https://maedler.in/product/track-roller-lfr5207-30-2rs-dw-30mm-inner-diameter-30mm-outer-diameter-80mm-sku-64780211/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5206-25-2RS dw 25mm inner diameter 25mm outer diameter 72mm SKU: 64780210](https://maedler.in/product/track-roller-lfr5206-25-2rs-dw-25mm-inner-diameter-25mm-outer-diameter-72mm-sku-64780210/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5206-20-2RS dw 20mm inner diameter 25mm outer diameter 72mm SKU: 64780209](https://maedler.in/product/track-roller-lfr5206-20-2rs-dw-20mm-inner-diameter-25mm-outer-diameter-72mm-sku-64780209/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5204-16-2RS dw 16mm inner diameter 20mm outer diameter 52mm SKU: 64780208](https://maedler.in/product/track-roller-lfr5204-16-2rs-dw-16mm-inner-diameter-20mm-outer-diameter-52mm-sku-64780208/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5201-12-2RS dw 12mm inner diameter 12mm outer diameter 35mm SKU: 64780207](https://maedler.in/product/track-roller-lfr5201-12-2rs-dw-12mm-inner-diameter-12mm-outer-diameter-35mm-sku-64780207/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5302-10-2RS dw 10mm inner diameter 15mm outer diameter 47mm SKU: 64780206](https://maedler.in/product/track-roller-lfr5302-10-2rs-dw-10mm-inner-diameter-15mm-outer-diameter-47mm-sku-64780206/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5301-10-2RS dw 10mm inner diameter 12mm outer diameter 42mm SKU: 64780205](https://maedler.in/product/track-roller-lfr5301-10-2rs-dw-10mm-inner-diameter-12mm-outer-diameter-42mm-sku-64780205/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5201-10-2RS dw 10mm inner diameter 12mm outer diameter 35mm SKU: 64780204](https://maedler.in/product/track-roller-lfr5201-10-2rs-dw-10mm-inner-diameter-12mm-outer-diameter-35mm-sku-64780204/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR50/8-6-2RS dw 6mm inner diameter 8mm outer diameter 24mm SKU: 64780203](https://maedler.in/product/track-roller-lfr50-8-6-2rs-dw-6mm-inner-diameter-8mm-outer-diameter-24mm-sku-64780203/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR50/5-6-2RS dw 6mm inner diameter 5mm outer diameter 17mm SKU: 64780202](https://maedler.in/product/track-roller-lfr50-5-6-2rs-dw-6mm-inner-diameter-5mm-outer-diameter-17mm-sku-64780202/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR50/5-4-2RS dw 4mm inner diameter 5mm outer diameter 16mm SKU: 64780201](https://maedler.in/product/track-roller-lfr50-5-4-2rs-dw-4mm-inner-diameter-5mm-outer-diameter-16mm-sku-64780201/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5208-40-2Z dw 40mm inner diameter 40mm outer diameter 98mm SKU: 64780112](https://maedler.in/product/track-roller-lfr5208-40-2z-dw-40mm-inner-diameter-40mm-outer-diameter-98mm-sku-64780112/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5207-30-2Z dw 30mm inner diameter 30mm outer diameter 80mm SKU: 64780111](https://maedler.in/product/track-roller-lfr5207-30-2z-dw-30mm-inner-diameter-30mm-outer-diameter-80mm-sku-64780111/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5206-25-2Z dw 25mm inner diameter 25mm outer diameter 72mm SKU: 64780110](https://maedler.in/product/track-roller-lfr5206-25-2z-dw-25mm-inner-diameter-25mm-outer-diameter-72mm-sku-64780110/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5206-20-2Z dw 20mm inner diameter 25mm outer diameter 72mm SKU: 64780109](https://maedler.in/product/track-roller-lfr5206-20-2z-dw-20mm-inner-diameter-25mm-outer-diameter-72mm-sku-64780109/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5204-16-2Z dw 16mm inner diameter 20mm outer diameter 52mm SKU: 64780108](https://maedler.in/product/track-roller-lfr5204-16-2z-dw-16mm-inner-diameter-20mm-outer-diameter-52mm-sku-64780108/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5201-12-2Z dw 12mm inner diameter 12mm outer diameter 35mm SKU: 64780107](https://maedler.in/product/track-roller-lfr5201-12-2z-dw-12mm-inner-diameter-12mm-outer-diameter-35mm-sku-64780107/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5302-10-2Z dw 10mm inner diameter 15mm outer diameter 47mm SKU: 64780106](https://maedler.in/product/track-roller-lfr5302-10-2z-dw-10mm-inner-diameter-15mm-outer-diameter-47mm-sku-64780106/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5301-10-2Z dw 10mm inner diameter 12mm outer diameter 42mm SKU: 64780105](https://maedler.in/product/track-roller-lfr5301-10-2z-dw-10mm-inner-diameter-12mm-outer-diameter-42mm-sku-64780105/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5201-10-2Z dw 10mm inner diameter 12mm outer diameter 35mm SKU: 64780104](https://maedler.in/product/track-roller-lfr5201-10-2z-dw-10mm-inner-diameter-12mm-outer-diameter-35mm-sku-64780104/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR50/8-6-2Z dw 6mm inner diameter 8mm outer diameter 24mm SKU: 64780103](https://maedler.in/product/track-roller-lfr50-8-6-2z-dw-6mm-inner-diameter-8mm-outer-diameter-24mm-sku-64780103/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR50/5-6-2Z dw 6mm inner diameter 5mm outer diameter 17mm SKU: 64780102](https://maedler.in/product/track-roller-lfr50-5-6-2z-dw-6mm-inner-diameter-5mm-outer-diameter-17mm-sku-64780102/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR50/5-4-2Z dw 4mm inner diameter 5mm outer diameter 16mm SKU: 64780101](https://maedler.in/product/track-roller-lfr50-5-4-2z-dw-4mm-inner-diameter-5mm-outer-diameter-16mm-sku-64780101/): Material: Roller bearing steel 100Cr6.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With friction-free metal shields 2Z.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [SKF tapered roller bearing 30310 J2/Q single row inner diameter 50mm outer diameter 110mm width 29,25mm SKU: 64777090](https://maedler.in/product/skf-tapered-roller-bearing-30310-j2-q-single-row-inner-diameter-50mm-outer-diameter-110mm-width-2925mm-sku-64777090/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30210 J2/Q single row inner diameter 50mm outer diameter 90mm width 21,75mm SKU: 64777083](https://maedler.in/product/skf-tapered-roller-bearing-30210-j2-q-single-row-inner-diameter-50mm-outer-diameter-90mm-width-2175mm-sku-64777083/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 32010 X/Q single row inner diameter 50mm outer diameter 80mm width 20mm SKU: 64777078](https://maedler.in/product/skf-tapered-roller-bearing-32010-x-q-single-row-inner-diameter-50mm-outer-diameter-80mm-width-20mm-sku-64777078/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30309 J2/Q single row inner diameter 45mm outer diameter 100mm width 27,25mm SKU: 64777073](https://maedler.in/product/skf-tapered-roller-bearing-30309-j2-q-single-row-inner-diameter-45mm-outer-diameter-100mm-width-2725mm-sku-64777073/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30209 J2/Q single row inner diameter 45mm outer diameter 85mm width 20,75mm SKU: 64777067](https://maedler.in/product/skf-tapered-roller-bearing-30209-j2-q-single-row-inner-diameter-45mm-outer-diameter-85mm-width-2075mm-sku-64777067/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 32009 X/Q single row inner diameter 45mm outer diameter 75mm width 20mm SKU: 64777064](https://maedler.in/product/skf-tapered-roller-bearing-32009-x-q-single-row-inner-diameter-45mm-outer-diameter-75mm-width-20mm-sku-64777064/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30308 J2/Q single row inner diameter 40mm outer diameter 90mm width 25,25mm SKU: 64777061](https://maedler.in/product/skf-tapered-roller-bearing-30308-j2-q-single-row-inner-diameter-40mm-outer-diameter-90mm-width-2525mm-sku-64777061/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30208 J2/Q single row inner diameter 40mm outer diameter 80mm width 19,75mm SKU: 64777057](https://maedler.in/product/skf-tapered-roller-bearing-30208-j2-q-single-row-inner-diameter-40mm-outer-diameter-80mm-width-1975mm-sku-64777057/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 32008 X/Q single row inner diameter 40mm outer diameter 68mm width 19mm SKU: 64777054](https://maedler.in/product/skf-tapered-roller-bearing-32008-x-q-single-row-inner-diameter-40mm-outer-diameter-68mm-width-19mm-sku-64777054/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30307 J2/Q single row inner diameter 35mm outer diameter 80mm width 22,75mm SKU: 64777044](https://maedler.in/product/skf-tapered-roller-bearing-30307-j2-q-single-row-inner-diameter-35mm-outer-diameter-80mm-width-2275mm-sku-64777044/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30207 J2/Q single row inner diameter 35mm outer diameter 72mm width 18,25mm SKU: 64777041](https://maedler.in/product/skf-tapered-roller-bearing-30207-j2-q-single-row-inner-diameter-35mm-outer-diameter-72mm-width-1825mm-sku-64777041/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 32007 X/Q single row inner diameter 35mm outer diameter 62mm width 18mm SKU: 64777039](https://maedler.in/product/skf-tapered-roller-bearing-32007-x-q-single-row-inner-diameter-35mm-outer-diameter-62mm-width-18mm-sku-64777039/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30306 J2/Q single row inner diameter 30mm outer diameter 72mm width 20,75mm SKU: 64777034](https://maedler.in/product/skf-tapered-roller-bearing-30306-j2-q-single-row-inner-diameter-30mm-outer-diameter-72mm-width-2075mm-sku-64777034/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30206 J2/Q single row inner diameter 30mm outer diameter 62mm width 17,25mm SKU: 64777030](https://maedler.in/product/skf-tapered-roller-bearing-30206-j2-q-single-row-inner-diameter-30mm-outer-diameter-62mm-width-1725mm-sku-64777030/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 32006 X/Q single row inner diameter 30mm outer diameter 55mm width 17mm SKU: 64777029](https://maedler.in/product/skf-tapered-roller-bearing-32006-x-q-single-row-inner-diameter-30mm-outer-diameter-55mm-width-17mm-sku-64777029/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30305 J2 single row inner diameter 25mm outer diameter 62mm width 18,25mm SKU: 64777023](https://maedler.in/product/skf-tapered-roller-bearing-30305-j2-single-row-inner-diameter-25mm-outer-diameter-62mm-width-1825mm-sku-64777023/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30205 J2/Q single row inner diameter 25mm outer diameter 52mm width 16,25mm SKU: 64777020](https://maedler.in/product/skf-tapered-roller-bearing-30205-j2-q-single-row-inner-diameter-25mm-outer-diameter-52mm-width-1625mm-sku-64777020/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 32005 X/Q single row inner diameter 25mm outer diameter 47mm width 15mm SKU: 64777019](https://maedler.in/product/skf-tapered-roller-bearing-32005-x-q-single-row-inner-diameter-25mm-outer-diameter-47mm-width-15mm-sku-64777019/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30304 J2/Q single row inner diameter 20mm outer diameter 52mm width 16,25mm SKU: 64777016](https://maedler.in/product/skf-tapered-roller-bearing-30304-j2-q-single-row-inner-diameter-20mm-outer-diameter-52mm-width-1625mm-sku-64777016/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30204 J2/Q single row inner diameter 20mm outer diameter 47mm width 15,25mm SKU: 64777015](https://maedler.in/product/skf-tapered-roller-bearing-30204-j2-q-single-row-inner-diameter-20mm-outer-diameter-47mm-width-1525mm-sku-64777015/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 32004 X/Q single row inner diameter 20mm outer diameter 42mm width 15mm SKU: 64777014](https://maedler.in/product/skf-tapered-roller-bearing-32004-x-q-single-row-inner-diameter-20mm-outer-diameter-42mm-width-15mm-sku-64777014/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30303 J2 single row inner diameter 17mm outer diameter 47mm width 15,25mm SKU: 64777012](https://maedler.in/product/skf-tapered-roller-bearing-30303-j2-single-row-inner-diameter-17mm-outer-diameter-47mm-width-1525mm-sku-64777012/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30203 J2 single row inner diameter 17mm outer diameter 40mm width 13,25mm SKU: 64777011](https://maedler.in/product/skf-tapered-roller-bearing-30203-j2-single-row-inner-diameter-17mm-outer-diameter-40mm-width-1325mm-sku-64777011/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF tapered roller bearing 30302 J2 single row inner diameter 15mm outer diameter 42mm width 14,25mm SKU: 64777010](https://maedler.in/product/skf-tapered-roller-bearing-30302-j2-single-row-inner-diameter-15mm-outer-diameter-42mm-width-1425mm-sku-64777010/): Material: Bearing steel. Tapered roller bearings in premium-quality. - For common axial and radial load. - Usable for low speed to middle speed. - Easy to mount (the outer ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF spherical roller bearing 22210 E/C3 double row inner diameter 50mm outer diameter 90mm width 23mm clearance C3 SKU: 64776328](https://maedler.in/product/skf-spherical-roller-bearing-22210-e-c3-double-row-inner-diameter-50mm-outer-diameter-90mm-width-23mm-clearance-c3-sku-64776328/): Material: Bearing steel.Spherical roller bearings in premium-quality.- For very high radial load and common high axial load in both directions.- Usable at angular displacement.- Usable for high speed, with groove and 3 lubribation holes.Temperature range: -30°C to +150°C (for short time up to +200°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF spherical roller bearing 22209 E/C3 double row inner diameter 45mm outer diameter 85mm width 23mm clearance C3 SKU: 64776322](https://maedler.in/product/skf-spherical-roller-bearing-22209-e-c3-double-row-inner-diameter-45mm-outer-diameter-85mm-width-23mm-clearance-c3-sku-64776322/): Material: Bearing steel.Spherical roller bearings in premium-quality.- For very high radial load and common high axial load in both directions.- Usable at angular displacement.- Usable for high speed, with groove and 3 lubribation holes.Temperature range: -30°C to +150°C (for short time up to +200°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF spherical roller bearing 22208 E/C3 double row inner diameter 40mm outer diameter 80mm width 23mm clearance C3 SKU: 64776318](https://maedler.in/product/skf-spherical-roller-bearing-22208-e-c3-double-row-inner-diameter-40mm-outer-diameter-80mm-width-23mm-clearance-c3-sku-64776318/): Material: Bearing steel.Spherical roller bearings in premium-quality.- For very high radial load and common high axial load in both directions.- Usable at angular displacement.- Usable for high speed, with groove and 3 lubribation holes.Temperature range: -30°C to +150°C (for short time up to +200°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF spherical roller bearing 22207 E/C3 double row inner diameter 35mm outer diameter 72mm width 23mm clearance C3 SKU: 64776316](https://maedler.in/product/skf-spherical-roller-bearing-22207-e-c3-double-row-inner-diameter-35mm-outer-diameter-72mm-width-23mm-clearance-c3-sku-64776316/): Material: Bearing steel.Spherical roller bearings in premium-quality.- For very high radial load and common high axial load in both directions.- Usable at angular displacement.- Usable for high speed, with groove and 3 lubribation holes.Temperature range: -30°C to +150°C (for short time up to +200°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF spherical roller bearing 22206 E/C3 double row inner diameter 30mm outer diameter 62mm width 20mm clearance C3 SKU: 64776314](https://maedler.in/product/skf-spherical-roller-bearing-22206-e-c3-double-row-inner-diameter-30mm-outer-diameter-62mm-width-20mm-clearance-c3-sku-64776314/): Material: Bearing steel.Spherical roller bearings in premium-quality.- For very high radial load and common high axial load in both directions.- Usable at angular displacement.- Usable for high speed, with groove and 3 lubribation holes.Temperature range: -30°C to +150°C (for short time up to +200°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF spherical roller bearing 22205 E/C3 double row inner diameter 25mm outer diameter 52mm width 18mm clearance C3 SKU: 64776312](https://maedler.in/product/skf-spherical-roller-bearing-22205-e-c3-double-row-inner-diameter-25mm-outer-diameter-52mm-width-18mm-clearance-c3-sku-64776312/): Material: Bearing steel.Spherical roller bearings in premium-quality.- For very high radial load and common high axial load in both directions.- Usable at angular displacement.- Usable for high speed, with groove and 3 lubribation holes.Temperature range: -30°C to +150°C (for short time up to +200°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF spherical roller bearing 22210 E double row inner diameter 50mm outer diameter 90mm width 23mm SKU: 64776028](https://maedler.in/product/skf-spherical-roller-bearing-22210-e-double-row-inner-diameter-50mm-outer-diameter-90mm-width-23mm-sku-64776028/): Material: Bearing steel. Spherical roller bearings in premium-quality. - For very high radial load and common high axial load in both directions. - Usable at angular displacement. - Usable for high speed, with groove and 3 lubribation holes. Temperature range: -30°C to +150°C (for short time up to +200°C). Other versions or other bearing types on request. - [SKF spherical roller bearing 22209 E double row inner diameter 45mm outer diameter 85mm width 23mm SKU: 64776022](https://maedler.in/product/skf-spherical-roller-bearing-22209-e-double-row-inner-diameter-45mm-outer-diameter-85mm-width-23mm-sku-64776022/): Material: Bearing steel. Spherical roller bearings in premium-quality. - For very high radial load and common high axial load in both directions. - Usable at angular displacement. - Usable for high speed, with groove and 3 lubribation holes. Temperature range: -30°C to +150°C (for short time up to +200°C). Other versions or other bearing types on request. - [SKF spherical roller bearing 22208 E double row inner diameter 40mm outer diameter 80mm width 23mm SKU: 64776018](https://maedler.in/product/skf-spherical-roller-bearing-22208-e-double-row-inner-diameter-40mm-outer-diameter-80mm-width-23mm-sku-64776018/): Material: Bearing steel. Spherical roller bearings in premium-quality. - For very high radial load and common high axial load in both directions. - Usable at angular displacement. - Usable for high speed, with groove and 3 lubribation holes. Temperature range: -30°C to +150°C (for short time up to +200°C). Other versions or other bearing types on request. - [SKF spherical roller bearing 22207 E double row inner diameter 35mm outer diameter 72mm width 23mm SKU: 64776016](https://maedler.in/product/skf-spherical-roller-bearing-22207-e-double-row-inner-diameter-35mm-outer-diameter-72mm-width-23mm-sku-64776016/): Material: Bearing steel. Spherical roller bearings in premium-quality. - For very high radial load and common high axial load in both directions. - Usable at angular displacement. - Usable for high speed, with groove and 3 lubribation holes. Temperature range: -30°C to +150°C (for short time up to +200°C). Other versions or other bearing types on request. - [SKF spherical roller bearing 22206 E double row inner diameter 30mm outer diameter 62mm width 20mm SKU: 64776014](https://maedler.in/product/skf-spherical-roller-bearing-22206-e-double-row-inner-diameter-30mm-outer-diameter-62mm-width-20mm-sku-64776014/): Material: Bearing steel. Spherical roller bearings in premium-quality. - For very high radial load and common high axial load in both directions. - Usable at angular displacement. - Usable for high speed, with groove and 3 lubribation holes. Temperature range: -30°C to +150°C (for short time up to +200°C). Other versions or other bearing types on request. - [SKF spherical roller bearing 22205 E double row inner diameter 25mm outer diameter 52mm width 18mm SKU: 64776012](https://maedler.in/product/skf-spherical-roller-bearing-22205-e-double-row-inner-diameter-25mm-outer-diameter-52mm-width-18mm-sku-64776012/): Material: Bearing steel. Spherical roller bearings in premium-quality. - For very high radial load and common high axial load in both directions. - Usable at angular displacement. - Usable for high speed, with groove and 3 lubribation holes. Temperature range: -30°C to +150°C (for short time up to +200°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 210 ECP/C3 single row inner diameter 50mm outer diameter 90mm width 20mm clearance C3 SKU: 64775413](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-210-ecp-c3-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-clearance-c3-sku-64775413/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 210 ECP/C3 single row inner diameter 50mm outer diameter 90mm width 20mm clearance C3 SKU: 64775412](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-210-ecp-c3-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-clearance-c3-sku-64775412/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 209 ECP/C3 single row inner diameter 45mm outer diameter 85mm width 19mm clearance C3 SKU: 64775396](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-209-ecp-c3-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-clearance-c3-sku-64775396/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 209 ECP/C3 single row inner diameter 45mm outer diameter 85mm width 19mm clearance C3 SKU: 64775395](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-209-ecp-c3-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-clearance-c3-sku-64775395/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 208 ECP/C3 single row inner diameter 40mm outer diameter 80mm width 18mm clearance C3 SKU: 64775379](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-208-ecp-c3-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-clearance-c3-sku-64775379/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 208 ECP/C3 single row inner diameter 40mm outer diameter 80mm width 18mm clearance C3 SKU: 64775378](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-208-ecp-c3-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-clearance-c3-sku-64775378/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 207 ECP/C3 single row inner diameter 35mm outer diameter 72mm width 17mm clearance C3 SKU: 64775363](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-207-ecp-c3-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-clearance-c3-sku-64775363/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 207 ECP/C3 single row inner diameter 35mm outer diameter 72mm width 17mm clearance C3 SKU: 64775362](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-207-ecp-c3-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-clearance-c3-sku-64775362/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 206 ECP/C3 single row inner diameter 30mm outer diameter 62mm width 16mm clearance C3 SKU: 64775353](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-206-ecp-c3-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-clearance-c3-sku-64775353/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 206 ECP/C3 single row inner diameter 30mm outer diameter 62mm width 16mm clearance C3 SKU: 64775352](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-206-ecp-c3-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-clearance-c3-sku-64775352/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 205 ECP/C3 single row inner diameter 25mm outer diameter 52mm width 15mm clearance C3 SKU: 64775329](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-205-ecp-c3-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-clearance-c3-sku-64775329/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 205 ECP/C3 single row inner diameter 25mm outer diameter 52mm width 15mm clearance C3 SKU: 64775328](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-205-ecp-c3-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-clearance-c3-sku-64775328/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 204 ECP/C3 single row inner diameter 20mm outer diameter 47mm width 14mm clearance C3 SKU: 64775314](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-204-ecp-c3-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-clearance-c3-sku-64775314/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 204 ECP/C3 single row inner diameter 20mm outer diameter 47mm width 14mm clearance C3 SKU: 64775313](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-204-ecp-c3-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-clearance-c3-sku-64775313/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 203 ECP/C3 single row inner diameter 17mm outer diameter 40mm width 12mm clearance C3 SKU: 64775304](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-203-ecp-c3-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-clearance-c3-sku-64775304/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 203 ECP/C3 single row inner diameter 17mm outer diameter 40mm width 12mm clearance C3 SKU: 64775303](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-203-ecp-c3-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-clearance-c3-sku-64775303/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 202 ECP/C3 single row inner diameter 15mm outer diameter 35mm width 11mm clearance C3 SKU: 64775301](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-202-ecp-c3-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-clearance-c3-sku-64775301/): Material: Bearing steel.Cylindrical roller bearings in premium-quality.- For high radial load.- Displaceable in both directions (type NU) or in one direction (Type NJ).- Usable for high speed, with groove and 3 lubribation holes.- Easy to mount (the inner ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 210 ECP single row inner diameter 50mm outer diameter 90mm width 20mm SKU: 64775113](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-210-ecp-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-sku-64775113/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 210 ECP single row inner diameter 50mm outer diameter 90mm width 20mm SKU: 64775112](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-210-ecp-single-row-inner-diameter-50mm-outer-diameter-90mm-width-20mm-sku-64775112/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 209 ECP single row inner diameter 45mm outer diameter 85mm width 19mm SKU: 64775096](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-209-ecp-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-sku-64775096/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 209 ECP single row inner diameter 45mm outer diameter 85mm width 19mm SKU: 64775095](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-209-ecp-single-row-inner-diameter-45mm-outer-diameter-85mm-width-19mm-sku-64775095/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 208 ECP single row inner diameter 40mm outer diameter 80mm width 18mm SKU: 64775079](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-208-ecp-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-sku-64775079/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 208 ECP single row inner diameter 40mm outer diameter 80mm width 18mm SKU: 64775078](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-208-ecp-single-row-inner-diameter-40mm-outer-diameter-80mm-width-18mm-sku-64775078/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 207 ECP single row inner diameter 35mm outer diameter 72mm width 17mm SKU: 64775063](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-207-ecp-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-sku-64775063/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 207 ECP single row inner diameter 35mm outer diameter 72mm width 17mm SKU: 64775062](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-207-ecp-single-row-inner-diameter-35mm-outer-diameter-72mm-width-17mm-sku-64775062/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 206 ECP single row inner diameter 30mm outer diameter 62mm width 16mm SKU: 64775053](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-206-ecp-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-sku-64775053/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 206 ECP single row inner diameter 30mm outer diameter 62mm width 16mm SKU: 64775052](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-206-ecp-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-sku-64775052/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NJ 205 ECP single row inner diameter 25mm outer diameter 52mm width 15mm SKU: 64775029](https://maedler.in/product/skf-cylindrical-roller-bearing-nj-205-ecp-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sku-64775029/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [SKF cylindrical roller bearing NU 205 ECP single row inner diameter 25mm outer diameter 52mm width 15mm SKU: 64775028](https://maedler.in/product/skf-cylindrical-roller-bearing-nu-205-ecp-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sku-64775028/): Material: Bearing steel. Cylindrical roller bearings in premium-quality. - For high radial load. - Displaceable in both directions (type NU) or in one direction (Type NJ). - Usable for high speed, with groove and 3 lubribation holes. - Easy to mount (the inner ring is loose). Temperature range: -30°C to +90°C (for short time up to +110°C). Other versions or other bearing types on request. - [Bevel gear made of steel module 1 40 teeth i=1:1 milled SKU: 36052600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-40-teeth-i11-milled-sku-36052600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 30 teeth i=1:1 milled SKU: 36052000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-30-teeth-i11-milled-sku-36052000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 26 teeth i=1:1 milled SKU: 36051800](https://maedler.in/product/bevel-gear-made-of-steel-module-1-26-teeth-i11-milled-sku-36051800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 22 teeth i=1:1 milled SKU: 36051300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-22-teeth-i11-milled-sku-36051300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 20 teeth i=1:1 milled SKU: 36051100](https://maedler.in/product/bevel-gear-made-of-steel-module-1-20-teeth-i11-milled-sku-36051100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 19 teeth i=1:1 milled SKU: 36051000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-19-teeth-i11-milled-sku-36051000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 16 teeth i=1:1 milled SKU: 36050700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-16-teeth-i11-milled-sku-36050700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 12 teeth i=1:1 milled SKU: 36050300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-12-teeth-i11-milled-sku-36050300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 45 teeth i=3:1 milled SKU: 36027700](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-45-teeth-i31-milled-sku-36027700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 15 teeth i=3:1 milled SKU: 36027600](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-15-teeth-i31-milled-sku-36027600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 50 teeth i=2:5 milled SKU: 36027300](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-50-teeth-i25-milled-sku-36027300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 20 teeth i=2:5 milled SKU: 36027200](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-20-teeth-i25-milled-sku-36027200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 40 teeth i=2:1 milled SKU: 36026100](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-40-teeth-i21-milled-sku-36026100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 20 teeth i=2:1 milled SKU: 36026000](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-20-teeth-i21-milled-sku-36026000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 30 teeth i=1:5 milled SKU: 36025300](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-30-teeth-i15-milled-sku-36025300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 20 teeth i=1:5 milled SKU: 36025200](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-20-teeth-i15-milled-sku-36025200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 0.5 50 teeth i=1:1 milled SKU: 36023200](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-50-teeth-i11-milled-sku-36023200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 40 teeth i=1:1 milled SKU: 36022600](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-40-teeth-i11-milled-sku-36022600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 36 teeth i=1:1 milled SKU: 36022300](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-36-teeth-i11-milled-sku-36022300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 30 teeth i=1:1 milled SKU: 36022000](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-30-teeth-i11-milled-sku-36022000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 24 teeth i=1:1 milled SKU: 36021500](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-24-teeth-i11-milled-sku-36021500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 0.5 20 teeth i=1:1 milled SKU: 36021100](https://maedler.in/product/bevel-gear-made-of-steel-module-0-5-20-teeth-i11-milled-sku-36021100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Worm shaft made of steel C45 module 5 single-thread, right SKU: 31060100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-5-single-thread-right-sku-31060100/): Material: Steel C45, whirled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 5 single-thread right hand SKU: 31060000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-5-single-thread-right-hand-sku-31060000/): Material: Steel C45, whirled. Single-thread worms to be paired with single-thread worm gears of the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel C45 module 4 double-thread right hand SKU: 31050100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-4-double-thread-right-hand-sku-31050100/): Material: Steel C45, whirled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 4 double-thread right hand SKU: 31050000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-4-double-thread-right-hand-sku-31050000/): Material: Steel C45, whirled. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel C45 module 4 single-thread right hand SKU: 31030100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-4-single-thread-right-hand-sku-31030100/): Material: Steel C45, whirled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 4 single-thread right hand SKU: 31030000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-4-single-thread-right-hand-sku-31030000/): Material: Steel C45, whirled. Single-thread worms to be paired with single-thread worm gears of the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel C45 module 3 double-thread right hand SKU: 31020100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-3-double-thread-right-hand-sku-31020100/): Material: Steel C45, whirled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 3 double-thread right hand SKU: 31020000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-3-double-thread-right-hand-sku-31020000/): Material: Steel C45, whirled. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel C45 module 3 single-thread right hand SKU: 31000100](https://maedler.in/product/worm-shaft-made-of-steel-c45-module-3-single-thread-right-hand-sku-31000100/): Material: Steel C45, whirled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel C45 module 3 single-thread right hand SKU: 31000000](https://maedler.in/product/hollow-worm-made-of-steel-c45-module-3-single-thread-right-hand-sku-31000000/): Material: Steel C45, whirled. Single-thread worms to be paired with single-thread worm gears of the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 2 double-thread right hand SKU: 30150100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-2-double-thread-right-hand-sku-30150100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 2 double-thread right hand SKU: 30150000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-2-double-thread-right-hand-sku-30150000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 2 single-thread right hand SKU: 30130100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-2-single-thread-right-hand-sku-30130100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 2 single-thread right hand SKU: 30130000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-2-single-thread-right-hand-sku-30130000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 1,5, double-thread right hand SKU: 30120100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-15-double-thread-right-hand-sku-30120100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 1.5 double-thread right hand SKU: 30120000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-1-5-double-thread-right-hand-sku-30120000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 1.5 single-thread right hand SKU: 30100100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-1-5-single-thread-right-hand-sku-30100100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 1.5 single-thread right hand SKU: 30100000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-1-5-single-thread-right-hand-sku-30100000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 1 double-thread right hand SKU: 30080100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-1-double-thread-right-hand-sku-30080100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 1 double-thread right hand SKU: 30080000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-1-double-thread-right-hand-sku-30080000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 1 single-thread right hand SKU: 30060100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-1-single-thread-right-hand-sku-30060100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 1 single-thread right hand SKU: 30060000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-1-single-thread-right-hand-sku-30060000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 0.75 double-thread right hand SKU: 30050100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-0-75-double-thread-right-hand-sku-30050100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 0.75 double-thread right hand SKU: 30050000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-0-75-double-thread-right-hand-sku-30050000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 0.75 single-thread right hand SKU: 30030100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-0-75-single-thread-right-hand-sku-30030100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 0.75 single-thread right hand SKU: 30030000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-0-75-single-thread-right-hand-sku-30030000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 0.5 double-thread right hand SKU: 30020100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-0-5-double-thread-right-hand-sku-30020100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Double-thread worms to be paired with double-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 0.5 double-thread right hand SKU: 30020000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-0-5-double-thread-right-hand-sku-30020000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Double-thread worms to be paired with double-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [Worm shaft made of steel 11SMnPb30 module 0.5 single-thread right hand SKU: 30000100](https://maedler.in/product/worm-shaft-made-of-steel-11smnpb30-module-0-5-single-thread-right-hand-sku-30000100/): Material: Steel 11SMnPb30+SH (1.0718), milled, with centring holes. Single-thread worms to be paired with single-thread worm gears. If the module (and number of threads) are matching, various ratios at various axle distances can be realized. Pressure angle 20°. - [Hollow worm made of steel 11SMnPb30 module 0.5 single-thread right hand SKU: 30000000](https://maedler.in/product/hollow-worm-made-of-steel-11smnpb30-module-0-5-single-thread-right-hand-sku-30000000/): Material: Steel 11SMnPb30+SH (1.0718), milled. Single-thread worms to be paired with single-thread worm gears with the same module. So, various ratios at various axle distances can be realized. Pressure angle 20°. - [spur gear POM black with hub module 3 60 teeth tooth width 30mm outer diameter 186mm SKU: 29811060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-60-teeth-tooth-width-30mm-outer-diameter-186mm-sku-29811060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 50 teeth tooth width 30mm outer diameter 156mm SKU: 29811050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-50-teeth-tooth-width-30mm-outer-diameter-156mm-sku-29811050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 48 teeth tooth width 30mm outer diameter 150mm SKU: 29811048](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-48-teeth-tooth-width-30mm-outer-diameter-150mm-sku-29811048/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 45 teeth tooth width 30mm outer diameter 141mm SKU: 29811045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-45-teeth-tooth-width-30mm-outer-diameter-141mm-sku-29811045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 40 teeth tooth width 30mm outer diameter 126mm SKU: 29811040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-40-teeth-tooth-width-30mm-outer-diameter-126mm-sku-29811040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 36 teeth tooth width 30mm outer diameter 114mm SKU: 29811036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-36-teeth-tooth-width-30mm-outer-diameter-114mm-sku-29811036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 35 teeth tooth width 30mm outer diameter 111mm SKU: 29811035](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-35-teeth-tooth-width-30mm-outer-diameter-111mm-sku-29811035/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 30 teeth tooth width 30mm outer diameter 96mm SKU: 29811030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-30-teeth-tooth-width-30mm-outer-diameter-96mm-sku-29811030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 28 teeth tooth width 30mm outer diameter 90mm SKU: 29811028](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-28-teeth-tooth-width-30mm-outer-diameter-90mm-sku-29811028/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 25 teeth tooth width 30mm outer diameter 81mm SKU: 29811025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-25-teeth-tooth-width-30mm-outer-diameter-81mm-sku-29811025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 24 teeth tooth width 30mm outer diameter 78mm SKU: 29811024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-24-teeth-tooth-width-30mm-outer-diameter-78mm-sku-29811024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 20 teeth tooth width 30mm outer diameter 66mm SKU: 29811020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-20-teeth-tooth-width-30mm-outer-diameter-66mm-sku-29811020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 18 teeth tooth width 30mm outer diameter 60mm SKU: 29811018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-18-teeth-tooth-width-30mm-outer-diameter-60mm-sku-29811018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 15 teeth tooth width 30mm outer diameter 51mm SKU: 29811015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-15-teeth-tooth-width-30mm-outer-diameter-51mm-sku-29811015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 14 teeth tooth width 30mm outer diameter 48mm SKU: 29811014](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-14-teeth-tooth-width-30mm-outer-diameter-48mm-sku-29811014/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 12 teeth tooth width 30mm outer diameter 42mm SKU: 29811012](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-12-teeth-tooth-width-30mm-outer-diameter-42mm-sku-29811012/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 3 10 teeth tooth width 30mm outer diameter 36mm SKU: 29811010](https://maedler.in/product/spur-gear-pom-black-with-hub-module-3-10-teeth-tooth-width-30mm-outer-diameter-36mm-sku-29811010/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 60 teeth tooth width 25mm outside diameter 186mm SKU: 29806000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-60-teeth-tooth-width-25mm-outside-diameter-186mm-sku-29806000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 56 teeth tooth width 25mm outside diameter 174mm SKU: 29805600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-56-teeth-tooth-width-25mm-outside-diameter-174mm-sku-29805600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 50 teeth tooth width 25mm outside diameter 156mm SKU: 29805000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-50-teeth-tooth-width-25mm-outside-diameter-156mm-sku-29805000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 48 teeth tooth width 25mm outside diameter 150mm SKU: 29804800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-48-teeth-tooth-width-25mm-outside-diameter-150mm-sku-29804800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 45 teeth tooth width 25mm outside diameter 141mm SKU: 29804500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-45-teeth-tooth-width-25mm-outside-diameter-141mm-sku-29804500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 40 teeth tooth width 25mm outside diameter 126mm SKU: 29804000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-40-teeth-tooth-width-25mm-outside-diameter-126mm-sku-29804000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 36 teeth tooth width 25mm outside diameter 114mm SKU: 29803600](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-36-teeth-tooth-width-25mm-outside-diameter-114mm-sku-29803600/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 35 teeth tooth width 25mm outside diameter 111mm SKU: 29803500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-35-teeth-tooth-width-25mm-outside-diameter-111mm-sku-29803500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 30 teeth tooth width 25mm outside diameter 96mm SKU: 29803000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-30-teeth-tooth-width-25mm-outside-diameter-96mm-sku-29803000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 28 teeth tooth width 25mm outside diameter 90mm SKU: 29802800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-28-teeth-tooth-width-25mm-outside-diameter-90mm-sku-29802800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 25 teeth tooth width 25mm outside diameter 81mm SKU: 29802500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-25-teeth-tooth-width-25mm-outside-diameter-81mm-sku-29802500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 24 teeth tooth width 25mm outside diameter 78mm SKU: 29802400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-24-teeth-tooth-width-25mm-outside-diameter-78mm-sku-29802400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 20 teeth tooth width 25mm outside diameter 66mm SKU: 29802000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-20-teeth-tooth-width-25mm-outside-diameter-66mm-sku-29802000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 18 teeth tooth width 25mm outside diameter 60mm SKU: 29801800](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-18-teeth-tooth-width-25mm-outside-diameter-60mm-sku-29801800/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 15 teeth tooth width 25mm outside diameter 51mm SKU: 29801500](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-15-teeth-tooth-width-25mm-outside-diameter-51mm-sku-29801500/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 14 teeth tooth width 25mm outside diameter 48mm SKU: 29801400](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-14-teeth-tooth-width-25mm-outside-diameter-48mm-sku-29801400/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 12 teeth tooth width 25mm outside diameter 42mm SKU: 29801200](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-12-teeth-tooth-width-25mm-outside-diameter-42mm-sku-29801200/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 3 10 teeth tooth width 25mm outside diameter 36mm SKU: 29801000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-3-10-teeth-tooth-width-25mm-outside-diameter-36mm-sku-29801000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Spur gear made of POM with hub module 2,5 120 teeth tooth width 20mm outside diameter 305mm SKU: 29712000](https://maedler.in/product/spur-gear-made-of-pom-with-hub-module-25-120-teeth-tooth-width-20mm-outside-diameter-305mm-sku-29712000/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 60 teeth tooth width 25mm outer diameter 155mm SKU: 29711060](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-60-teeth-tooth-width-25mm-outer-diameter-155mm-sku-29711060/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 50 teeth tooth width 25mm outer diameter 130mm SKU: 29711050](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-50-teeth-tooth-width-25mm-outer-diameter-130mm-sku-29711050/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 45 teeth tooth width 25mm outer diameter 117,5mm SKU: 29711045](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-45-teeth-tooth-width-25mm-outer-diameter-1175mm-sku-29711045/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 40 teeth tooth width 25mm outer diameter 105mm SKU: 29711040](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-40-teeth-tooth-width-25mm-outer-diameter-105mm-sku-29711040/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 36 teeth tooth width 25mm outer diameter 95mm SKU: 29711036](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-36-teeth-tooth-width-25mm-outer-diameter-95mm-sku-29711036/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 30 teeth tooth width 25mm outer diameter 80mm SKU: 29711030](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-30-teeth-tooth-width-25mm-outer-diameter-80mm-sku-29711030/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 25 teeth tooth width 25mm outer diameter 67,5mm SKU: 29711025](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-25-teeth-tooth-width-25mm-outer-diameter-675mm-sku-29711025/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 24 teeth tooth width 25mm outer diameter 65mm SKU: 29711024](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-24-teeth-tooth-width-25mm-outer-diameter-65mm-sku-29711024/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 20 teeth tooth width 25mm outer diameter 55mm SKU: 29711020](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-20-teeth-tooth-width-25mm-outer-diameter-55mm-sku-29711020/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 18 teeth tooth width 25mm outer diameter 50mm SKU: 29711018](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-18-teeth-tooth-width-25mm-outer-diameter-50mm-sku-29711018/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 16 teeth tooth width 25mm outer diameter 45mm SKU: 29711016](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-16-teeth-tooth-width-25mm-outer-diameter-45mm-sku-29711016/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [spur gear POM black with hub module 2,5 15 teeth tooth width 25mm outer diameter 42,5mm SKU: 29711015](https://maedler.in/product/spur-gear-pom-black-with-hub-module-25-15-teeth-tooth-width-25mm-outer-diameter-425mm-sku-29711015/): Material: POM, white / nature, milled teeth. Tooth quality 10d25 DIN 3967. Pressure angle 20°. Untoleranced dimensions in accordance with DIN ISO 2768 middle. Temperature limit: continuous 100°C, only short time 160°C. Water absorption (satiable) 0,5% Cws. - [Radial shaft seal type A with one sealing lip 25 x 52 x 8mm SKU: 64790133](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-52-x-8mm-sku-64790133/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 52 x 7mm SKU: 64790132](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-52-x-7mm-sku-64790132/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 50 x 10mm SKU: 64790131](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-50-x-10mm-sku-64790131/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 47 x 10mm SKU: 64790130](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-47-x-10mm-sku-64790130/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 47 x 7mm SKU: 64790129](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-47-x-7mm-sku-64790129/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 45 x 10mm SKU: 64790127](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-45-x-10mm-sku-64790127/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 42 x 10mm SKU: 64790124](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-42-x-10mm-sku-64790124/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 42 x 7mm SKU: 64790123](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-42-x-7mm-sku-64790123/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 40 x 10mm SKU: 64790120](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-40-x-10mm-sku-64790120/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 40 x 8mm SKU: 64790119](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-40-x-8mm-sku-64790119/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 40 x 7mm SKU: 64790118](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-40-x-7mm-sku-64790118/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 40 x 5mm SKU: 64790117](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-40-x-5mm-sku-64790117/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 38 x 7mm SKU: 64790116](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-38-x-7mm-sku-64790116/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 37 x 7mm SKU: 64790115](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-37-x-7mm-sku-64790115/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 37 x 5mm SKU: 64790113](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-37-x-5mm-sku-64790113/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 35 x 7mm SKU: 64790112](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-35-x-7mm-sku-64790112/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 24 x 40 x 7mm SKU: 64790108](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-24-x-40-x-7mm-sku-64790108/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 24 x 37 x 7mm SKU: 64790107](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-24-x-37-x-7mm-sku-64790107/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 24 x 35 x 7mm SKU: 64790106](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-24-x-35-x-7mm-sku-64790106/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 22 x 47 x 7mm SKU: 64790102](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-22-x-47-x-7mm-sku-64790102/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 22 x 40 x 10mm SKU: 64790098](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-22-x-40-x-10mm-sku-64790098/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 22 x 40 x 7mm SKU: 64790097](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-22-x-40-x-7mm-sku-64790097/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 22 x 38 x 8mm SKU: 64790096](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-22-x-38-x-8mm-sku-64790096/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 22 x 35 x 7mm SKU: 64790094](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-22-x-35-x-7mm-sku-64790094/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 22 x 32 x 7mm SKU: 64790093](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-22-x-32-x-7mm-sku-64790093/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 52 x 10mm SKU: 64790090](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-52-x-10mm-sku-64790090/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 52 x 7mm SKU: 64790089](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-52-x-7mm-sku-64790089/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 47 x 10mm SKU: 64790088](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-47-x-10mm-sku-64790088/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 47 x 7mm SKU: 64790087](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-47-x-7mm-sku-64790087/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 42 x 7mm SKU: 64790084](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-42-x-7mm-sku-64790084/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 40 x 7mm SKU: 64790082](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-40-x-7mm-sku-64790082/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 36 x 7mm SKU: 64790080](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-36-x-7mm-sku-64790080/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 35 x 10mm SKU: 64790077](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-35-x-10mm-sku-64790077/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 35 x 7mm SKU: 64790076](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-35-x-7mm-sku-64790076/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 32 x 7mm SKU: 64790073](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-32-x-7mm-sku-64790073/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 30 x 7mm SKU: 64790071](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-30-x-7mm-sku-64790071/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 20 x 30 x 5mm SKU: 64790070](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-20-x-30-x-5mm-sku-64790070/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 19 x 32 x 7mm SKU: 64790068](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-19-x-32-x-7mm-sku-64790068/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 19 x 30 x 7mm SKU: 64790066](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-19-x-30-x-7mm-sku-64790066/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 18 x 35 x 7mm SKU: 64790063](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-18-x-35-x-7mm-sku-64790063/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 18 x 32 x 7mm SKU: 64790062](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-18-x-32-x-7mm-sku-64790062/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 18 x 30 x 7mm SKU: 64790061](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-18-x-30-x-7mm-sku-64790061/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 18 x 28 x 7mm SKU: 64790059](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-18-x-28-x-7mm-sku-64790059/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 17 x 40 x 10mm SKU: 64790058](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-17-x-40-x-10mm-sku-64790058/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 17 x 40 x 7mm SKU: 64790057](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-17-x-40-x-7mm-sku-64790057/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 17 x 35 x 7mm SKU: 64790055](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-17-x-35-x-7mm-sku-64790055/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 17 x 32 x 7mm SKU: 64790054](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-17-x-32-x-7mm-sku-64790054/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 17 x 30 x 7mm SKU: 64790053](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-17-x-30-x-7mm-sku-64790053/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 17 x 29 x 5mm SKU: 64790052](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-17-x-29-x-5mm-sku-64790052/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 17 x 28 x 7mm SKU: 64790051](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-17-x-28-x-7mm-sku-64790051/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 16 x 35 x 7mm SKU: 64790050](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-16-x-35-x-7mm-sku-64790050/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 16 x 32 x 7mm SKU: 64790049](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-16-x-32-x-7mm-sku-64790049/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 16 x 30 x 7mm SKU: 64790048](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-16-x-30-x-7mm-sku-64790048/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 16 x 28 x 7mm SKU: 64790045](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-16-x-28-x-7mm-sku-64790045/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 15 x 40 x 10mm SKU: 64790043](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-15-x-40-x-10mm-sku-64790043/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 15 x 35 x 7mm SKU: 64790041](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-15-x-35-x-7mm-sku-64790041/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 15 x 32 x 7mm SKU: 64790040](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-15-x-32-x-7mm-sku-64790040/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 15 x 30 x 7mm SKU: 64790039](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-15-x-30-x-7mm-sku-64790039/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 15 x 26 x 7mm SKU: 64790038](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-15-x-26-x-7mm-sku-64790038/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 15 x 25 x 5mm SKU: 64790036](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-15-x-25-x-5mm-sku-64790036/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 15 x 24 x 7mm SKU: 64790035](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-15-x-24-x-7mm-sku-64790035/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 14 x 30 x 7mm SKU: 64790034](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-14-x-30-x-7mm-sku-64790034/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 14 x 25 x 5mm SKU: 64790032](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-14-x-25-x-5mm-sku-64790032/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 14 x 24 x 7mm SKU: 64790031](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-14-x-24-x-7mm-sku-64790031/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 12 x 32 x 7mm SKU: 64790029](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-12-x-32-x-7mm-sku-64790029/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 12 x 30 x 7mm SKU: 64790028](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-12-x-30-x-7mm-sku-64790028/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 12 x 28 x 7mm SKU: 64790027](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-12-x-28-x-7mm-sku-64790027/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 12 x 24 x 7mm SKU: 64790025](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-12-x-24-x-7mm-sku-64790025/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 12 x 22 x 7mm SKU: 64790024](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-12-x-22-x-7mm-sku-64790024/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 12 x 22 x 6mm SKU: 64790023](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-12-x-22-x-6mm-sku-64790023/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 12 x 22 x 5mm SKU: 64790022](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-12-x-22-x-5mm-sku-64790022/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 12 x 19 x 5mm SKU: 64790021](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-12-x-19-x-5mm-sku-64790021/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 10 x 26 x 7mm SKU: 64790020](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-10-x-26-x-7mm-sku-64790020/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 10 x 24 x 7mm SKU: 64790018](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-10-x-24-x-7mm-sku-64790018/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 10 x 22 x 7mm SKU: 64790017](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-10-x-22-x-7mm-sku-64790017/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 10 x 19 x 7mm SKU: 64790014](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-10-x-19-x-7mm-sku-64790014/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 8 x 22 x 7mm SKU: 64790012](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-8-x-22-x-7mm-sku-64790012/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 7 x 22 x 7mm SKU: 64790008](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-7-x-22-x-7mm-sku-64790008/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 6 x 22 x 7mm SKU: 64790007](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-6-x-22-x-7mm-sku-64790007/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 6 x 16 x 7mm SKU: 64790006](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-6-x-16-x-7mm-sku-64790006/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 6 x 16 x 5mm SKU: 64790005](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-6-x-16-x-5mm-sku-64790005/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Track roller LFR5206-25-2RS stainless steel dw 25mm inner diameter 25mm outer diameter 72mm SKU: 64780610](https://maedler.in/product/track-roller-lfr5206-25-2rs-stainless-steel-dw-25mm-inner-diameter-25mm-outer-diameter-72mm-sku-64780610/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5206-20-2RS stainless steel dw 20mm inner diameter 25mm outer diameter 72mm SKU: 64780609](https://maedler.in/product/track-roller-lfr5206-20-2rs-stainless-steel-dw-20mm-inner-diameter-25mm-outer-diameter-72mm-sku-64780609/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5204-16-2RS stainless steel dw 16mm inner diameter 20mm outer diameter 52mm SKU: 64780608](https://maedler.in/product/track-roller-lfr5204-16-2rs-stainless-steel-dw-16mm-inner-diameter-20mm-outer-diameter-52mm-sku-64780608/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5201-12-2RS stainless steel dw 12mm inner diameter 12mm outer diameter 35mm SKU: 64780607](https://maedler.in/product/track-roller-lfr5201-12-2rs-stainless-steel-dw-12mm-inner-diameter-12mm-outer-diameter-35mm-sku-64780607/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5302-10-2RS stainless steel dw 10mm inner diameter 15mm outer diameter 47mm SKU: 64780606](https://maedler.in/product/track-roller-lfr5302-10-2rs-stainless-steel-dw-10mm-inner-diameter-15mm-outer-diameter-47mm-sku-64780606/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5301-10-2RS stainless steel dw 10mm inner diameter 12mm outer diameter 42mm SKU: 64780605](https://maedler.in/product/track-roller-lfr5301-10-2rs-stainless-steel-dw-10mm-inner-diameter-12mm-outer-diameter-42mm-sku-64780605/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR5201-10-2RS stainless steel dw 10mm inner diameter 12mm outer diameter 35mm SKU: 64780604](https://maedler.in/product/track-roller-lfr5201-10-2rs-stainless-steel-dw-10mm-inner-diameter-12mm-outer-diameter-35mm-sku-64780604/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR50/8-6-2RS stainless steel dw 6mm inner diameter 8mm outer diameter 24mm SKU: 64780603](https://maedler.in/product/track-roller-lfr50-8-6-2rs-stainless-steel-dw-6mm-inner-diameter-8mm-outer-diameter-24mm-sku-64780603/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR50/5-6-2RS stainless steel dw 6mm inner diameter 5mm outer diameter 17mm SKU: 64780602](https://maedler.in/product/track-roller-lfr50-5-6-2rs-stainless-steel-dw-6mm-inner-diameter-5mm-outer-diameter-17mm-sku-64780602/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Track roller LFR50/5-4-2RS stainless steel dw 4mm inner diameter 5mm outer diameter 16mm SKU: 64780601](https://maedler.in/product/track-roller-lfr50-5-4-2rs-stainless-steel-dw-4mm-inner-diameter-5mm-outer-diameter-16mm-sku-64780601/): Material: Stainless steel X105CrMo17.• Standard rollers in high quality with very strong outer ring and special groove design for 2-point contact. Pressure angle 30°.• Integrated double-row angular contact ball bearings for common axial and high radial load.• Usable on hardened and ground linear shaft steel with shaft support or on special linear guides.• With contacting rubber seals 2RS.Accuracy class PN DIN 620. Radial clearance approaching class CN. From size dw 16 with lubrication hole at the inner ring. Temperature range: -30°C to +90°C (for short time up to +110°C). - [Eccentric bolt LFE40x107A1 dw 40mm bolt diameter 40mm length 117mm SKU: 64780412](https://maedler.in/product/eccentric-bolt-lfe40x107a1-dw-40mm-bolt-diameter-40mm-length-117mm-sku-64780412/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Eccentric bolt LFE30x95A1 dw 30mm bolt diameter 30mm length 107mm SKU: 64780411](https://maedler.in/product/eccentric-bolt-lfe30x95a1-dw-30mm-bolt-diameter-30mm-length-107mm-sku-64780411/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Eccentric bolt LFE25x82A1 dw 20/25mm bolt diameter 25mm length 92mm SKU: 64780409](https://maedler.in/product/eccentric-bolt-lfe25x82a1-dw-20-25mm-bolt-diameter-25mm-length-92mm-sku-64780409/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Eccentric bolt LFE20x67A1 dw 16mm bolt diameter 20mm length 75mm SKU: 64780408](https://maedler.in/product/eccentric-bolt-lfe20x67a1-dw-16mm-bolt-diameter-20mm-length-75mm-sku-64780408/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Eccentric bolt LFE12x45A1 dw 12mm bolt diameter 12mm length 50mm SKU: 64780407](https://maedler.in/product/eccentric-bolt-lfe12x45a1-dw-12mm-bolt-diameter-12mm-length-50mm-sku-64780407/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Eccentric bolt LFE15 dw 10mm bolt diameter 15mm length 50.8mm SKU: 64780406](https://maedler.in/product/eccentric-bolt-lfe15-dw-10mm-bolt-diameter-15mm-length-50-8mm-sku-64780406/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Eccentric bolt LFE12/M12 dw 10mm bolt diameter 12mm length 50.8mm SKU: 64780405](https://maedler.in/product/eccentric-bolt-lfe12-m12-dw-10mm-bolt-diameter-12mm-length-50-8mm-sku-64780405/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Eccentric bolt LFE12 dw 10mm bolt diameter 12mm length 43mm19.5mm SKU: 64780404](https://maedler.in/product/eccentric-bolt-lfe12-dw-10mm-bolt-diameter-12mm-length-43mm19-5mm-sku-64780404/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Eccentric bolt LFE8 dw 6mm bolt diameter 8mm length 28.3mm SKU: 64780403](https://maedler.in/product/eccentric-bolt-lfe8-dw-6mm-bolt-diameter-8mm-length-28-3mm-sku-64780403/): Material: Heat-treated steel, black oxide finish.• Eccentric bolt for mounting profil track rollers on adjustable position, to install the rollers clearance-free.• Normally, a carriage has four rollers: On one side two rollers with centric bolts on fixed position. On the other side two rollers on eccentric bolts, so that they can get adjusted clearance-free.• The assignment of the bolt to the profil track roller is made by the linear shaft diameter dw and the bolt diameter dz.• Included in scope of delivery, there is a distance washer for release mount of the track roller, for turn without binding (from LFZ8). - [Bevel gear made of steel module 3 30 teeth i=2:1 milled SKU: 36145700](https://maedler.in/product/bevel-gear-made-of-steel-module-3-30-teeth-i21-milled-sku-36145700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 15 teeth i=2:1 milled SKU: 36145600](https://maedler.in/product/bevel-gear-made-of-steel-module-3-15-teeth-i21-milled-sku-36145600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 30 teeth i=1.5:1 milled SKU: 36145300](https://maedler.in/product/bevel-gear-made-of-steel-module-3-30-teeth-i1-51-milled-sku-36145300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 20 teeth i=1.5:1 milled SKU: 36145200](https://maedler.in/product/bevel-gear-made-of-steel-module-3-20-teeth-i1-51-milled-sku-36145200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 24 teeth i=1.5:1 milled SKU: 36144900](https://maedler.in/product/bevel-gear-made-of-steel-module-3-24-teeth-i1-51-milled-sku-36144900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=1.5:1 milled SKU: 36144800](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i1-51-milled-sku-36144800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 20 teeth i=1.25:1 milled SKU: 36144500](https://maedler.in/product/bevel-gear-made-of-steel-module-3-20-teeth-i1-251-milled-sku-36144500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=1.25:1 milled SKU: 36144400](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i1-251-milled-sku-36144400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 40 teeth i=1:1 milled SKU: 36142600](https://maedler.in/product/bevel-gear-made-of-steel-module-3-40-teeth-i11-milled-sku-36142600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 30 teeth i=1:1 milled SKU: 36142000](https://maedler.in/product/bevel-gear-made-of-steel-module-3-30-teeth-i11-milled-sku-36142000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 25 teeth i=1:1 milled SKU: 36141600](https://maedler.in/product/bevel-gear-made-of-steel-module-3-25-teeth-i11-milled-sku-36141600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 22 teeth i=1:1 milled SKU: 36141300](https://maedler.in/product/bevel-gear-made-of-steel-module-3-22-teeth-i11-milled-sku-36141300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 20 teeth i=1:1 milled SKU: 36141100](https://maedler.in/product/bevel-gear-made-of-steel-module-3-20-teeth-i11-milled-sku-36141100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 18 teeth i=1:1 milled SKU: 36140900](https://maedler.in/product/bevel-gear-made-of-steel-module-3-18-teeth-i11-milled-sku-36140900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 16 teeth i=1:1 milled SKU: 36140700](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i11-milled-sku-36140700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 60 teeth i=4:1 milled SKU: 36119300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-60-teeth-i41-milled-sku-36119300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 15 teeth i=4:1 milled SKU: 36119200](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-15-teeth-i41-milled-sku-36119200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 56 teeth i=3.5:1 milled SKU: 36118500](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-56-teeth-i3-51-milled-sku-36118500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 16 teeth i=3.5:1 milled SKU: 36118400](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i3-51-milled-sku-36118400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 48 teeth i=3:1 milled SKU: 36118100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-48-teeth-i31-milled-sku-36118100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 16 teeth i=3:1 milled SKU: 36118000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i31-milled-sku-36118000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 45 teeth i=2.5:1 milled SKU: 36116900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-45-teeth-i2-51-milled-sku-36116900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 18 teeth i=2.5:1 milled SKU: 36116800](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-18-teeth-i2-51-milled-sku-36116800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 40 teeth i=2.5:1 milled SKU: 36116500](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-40-teeth-i2-51-milled-sku-36116500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 16 teeth i=2.5:1 milled SKU: 36116400](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i2-51-milled-sku-36116400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 40 teeth i=2:1 milled SKU: 36116100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-40-teeth-i21-milled-sku-36116100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 20 teeth i=2:1 milled SKU: 36116000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-20-teeth-i21-milled-sku-36116000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 30 teeth i=2:1 milled SKU: 36115700](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-30-teeth-i21-milled-sku-36115700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 15 teeth i=2:1 milled SKU: 36115600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-15-teeth-i21-milled-sku-36115600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 30 teeth i=1.5:1 milled SKU: 36115300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-30-teeth-i1-51-milled-sku-36115300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 20 teeth i=1.5:1 milled SKU: 36115200](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-20-teeth-i1-51-milled-sku-36115200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 24 teeth i=1.5:1 milled SKU: 36114900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-24-teeth-i1-51-milled-sku-36114900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 16 teeth i=1.5:1 milled SKU: 36114800](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i1-51-milled-sku-36114800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2.5 40 teeth i=1:1 milled SKU: 36112600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-40-teeth-i11-milled-sku-36112600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 30 teeth i=1:1 milled SKU: 36112000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-30-teeth-i11-milled-sku-36112000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 25 teeth i=1:1 milled SKU: 36111600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-25-teeth-i11-milled-sku-36111600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 22 teeth i=1:1 milled SKU: 36111300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-22-teeth-i11-milled-sku-36111300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 20 teeth i=1:1 milled SKU: 36111100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-20-teeth-i11-milled-sku-36111100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 18 teeth i=1:1 milled SKU: 36110900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-18-teeth-i11-milled-sku-36110900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2.5 16 teeth i=1:1 milled SKU: 36110700](https://maedler.in/product/bevel-gear-made-of-steel-module-2-5-16-teeth-i11-milled-sku-36110700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 60 teeth i=4:1 milled SKU: 36109300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-60-teeth-i41-milled-sku-36109300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 15 teeth i=4:1 milled SKU: 36109200](https://maedler.in/product/bevel-gear-made-of-steel-module-2-15-teeth-i41-milled-sku-36109200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 56 teeth i=3,5:1 milled SKU: 36108500](https://maedler.in/product/bevel-gear-made-of-steel-module-2-56-teeth-i351-milled-sku-36108500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 16 teeth i=3.5:1 milled SKU: 36108400](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i3-51-milled-sku-36108400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 48 teeth i=3:1 milled SKU: 36108100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-48-teeth-i31-milled-sku-36108100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 16 teeth i=3:1 milled SKU: 36108000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i31-milled-sku-36108000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 45 teeth i=2.5:1 milled SKU: 36106900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-45-teeth-i2-51-milled-sku-36106900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 18 teeth i=2.5:1 milled SKU: 36106800](https://maedler.in/product/bevel-gear-made-of-steel-module-2-18-teeth-i2-51-milled-sku-36106800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 40 teeth i=2.5:1 milled SKU: 36106500](https://maedler.in/product/bevel-gear-made-of-steel-module-2-40-teeth-i2-51-milled-sku-36106500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 16 teeth i=2.5:1 milled SKU: 36106400](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i2-51-milled-sku-36106400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 40 teeth i=2:1 milled SKU: 36106100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-40-teeth-i21-milled-sku-36106100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 20 teeth i=2:1 milled SKU: 36106000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-20-teeth-i21-milled-sku-36106000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 30 teeth i=2:1 milled SKU: 36105700](https://maedler.in/product/bevel-gear-made-of-steel-module-2-30-teeth-i21-milled-sku-36105700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 15 teeth i=2:1 milled SKU: 36105600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-15-teeth-i21-milled-sku-36105600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 30 teeth i=1,5 milled SKU: 36105300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-30-teeth-i15-milled-sku-36105300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 20 teeth i=1.5:1 milled SKU: 36105200](https://maedler.in/product/bevel-gear-made-of-steel-module-2-20-teeth-i1-51-milled-sku-36105200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 24 teeth i=1.5:1 milled SKU: 36104900](https://maedler.in/product/bevel-gear-made-of-steel-module-2-24-teeth-i1-51-milled-sku-36104900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 16 teeth i=1.5:1 milled SKU: 36104800](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i1-51-milled-sku-36104800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 2 40 teeth i=1:1 milled SKU: 36102600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-40-teeth-i11-milled-sku-36102600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 30 teeth i=1:1 milled SKU: 36102000](https://maedler.in/product/bevel-gear-made-of-steel-module-2-30-teeth-i11-milled-sku-36102000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 25 teeth i=1:1 milled SKU: 36101600](https://maedler.in/product/bevel-gear-made-of-steel-module-2-25-teeth-i11-milled-sku-36101600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 22 teeth i=1:1 milled SKU: 36101300](https://maedler.in/product/bevel-gear-made-of-steel-module-2-22-teeth-i11-milled-sku-36101300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 20 teeth i=1:1 milled SKU: 36101100](https://maedler.in/product/bevel-gear-made-of-steel-module-2-20-teeth-i11-milled-sku-36101100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 2 16 teeth i=1:1 milled SKU: 36100700](https://maedler.in/product/bevel-gear-made-of-steel-module-2-16-teeth-i11-milled-sku-36100700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 60 teeth i=4:1 milled SKU: 36079300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-60-teeth-i41-milled-sku-36079300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 15 teeth i=4:1 milled SKU: 36079200](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-15-teeth-i41-milled-sku-36079200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 56 teeth i=3.5:1 milled SKU: 36078500](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-56-teeth-i3-51-milled-sku-36078500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 16 teeth i=3.5:1 milled SKU: 36078400](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i3-51-milled-sku-36078400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 48 teeth i=3:1 milled SKU: 36078100](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-48-teeth-i31-milled-sku-36078100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 16 teeth i=3:1 milled SKU: 36078000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i31-milled-sku-36078000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 45 teeth i=2.5:1 milled SKU: 36076900](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-45-teeth-i2-51-milled-sku-36076900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 18 teeth i=2.5:1 milled SKU: 36076800](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-18-teeth-i2-51-milled-sku-36076800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 40 teeth i=2.5:1 milled SKU: 36076500](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-40-teeth-i2-51-milled-sku-36076500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 16 teeth i=2.5:1 milled SKU: 36076400](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i2-51-milled-sku-36076400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 40 teeth i=2:1 milled SKU: 36076100](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-40-teeth-i21-milled-sku-36076100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 20 teeth i=2:1 milled SKU: 36076000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-20-teeth-i21-milled-sku-36076000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 30 teeth i=2:1 milled SKU: 36075700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-30-teeth-i21-milled-sku-36075700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 15 teeth i=2:1 milled SKU: 36075600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-15-teeth-i21-milled-sku-36075600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 30 teeth i=1.5:1 milled SKU: 36075300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-30-teeth-i1-51-milled-sku-36075300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 20 teeth i=1.5:1 milled SKU: 36075200](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-20-teeth-i1-51-milled-sku-36075200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 24 teeth i=1.5:1 milled SKU: 36074900](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-24-teeth-i1-51-milled-sku-36074900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 16 teeth i=1.5:1 milled SKU: 36074800](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i1-51-milled-sku-36074800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1.5 40 teeth i=1:1 milled SKU: 36072600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-40-teeth-i11-milled-sku-36072600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 30 teeth i=1:1 milled SKU: 36072000](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-30-teeth-i11-milled-sku-36072000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 25 teeth i=1:1 milled SKU: 36071600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-25-teeth-i11-milled-sku-36071600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 22 teeth i=1:1 milled SKU: 36071300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-22-teeth-i11-milled-sku-36071300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 20 teeth i=1:1 milled SKU: 36071100](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-20-teeth-i11-milled-sku-36071100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1.5 16 teeth i=1:1 milled SKU: 36070700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-5-16-teeth-i11-milled-sku-36070700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 1 60 teeth i=4:1 milled SKU: 36059300](https://maedler.in/product/bevel-gear-made-of-steel-module-1-60-teeth-i41-milled-sku-36059300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 15 teeth i=4:1 milled SKU: 36059200](https://maedler.in/product/bevel-gear-made-of-steel-module-1-15-teeth-i41-milled-sku-36059200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 56 teeth i=3,5:1 milled SKU: 36058500](https://maedler.in/product/bevel-gear-made-of-steel-module-1-56-teeth-i351-milled-sku-36058500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 16 teeth i=3,5:1 milled SKU: 36058400](https://maedler.in/product/bevel-gear-made-of-steel-module-1-16-teeth-i351-milled-sku-36058400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 45 teeth i=3:1 milled SKU: 36057700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-45-teeth-i31-milled-sku-36057700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 15 teeth i=3:1 milled SKU: 36057600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-15-teeth-i31-milled-sku-36057600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 40 teeth i=2,5:1 milled SKU: 36056500](https://maedler.in/product/bevel-gear-made-of-steel-module-1-40-teeth-i251-milled-sku-36056500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 16 teeth i=2,5:1 milled SKU: 36056400](https://maedler.in/product/bevel-gear-made-of-steel-module-1-16-teeth-i251-milled-sku-36056400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 30 teeth i=2:1 milled SKU: 36055700](https://maedler.in/product/bevel-gear-made-of-steel-module-1-30-teeth-i21-milled-sku-36055700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 15 teeth i=2:1 milled SKU: 36055600](https://maedler.in/product/bevel-gear-made-of-steel-module-1-15-teeth-i21-milled-sku-36055600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 24 teeth i=1,5:1 milled SKU: 36054900](https://maedler.in/product/bevel-gear-made-of-steel-module-1-24-teeth-i151-milled-sku-36054900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 1 16 teeth i=1.5:1 milled SKU: 36054800](https://maedler.in/product/bevel-gear-made-of-steel-module-1-16-teeth-i1-51-milled-sku-36054800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Radial shaft seal type A with one sealing lip 45 x 58 x 7mm SKU: 64790306](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-58-x-7mm-sku-64790306/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 44 x 65 x 10mm SKU: 64790304](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-44-x-65-x-10mm-sku-64790304/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 44 x 62 x 10mm SKU: 64790303](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-44-x-62-x-10mm-sku-64790303/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 44 x 60 x 10mm SKU: 64790302](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-44-x-60-x-10mm-sku-64790302/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 42 x 72 x 10mm SKU: 64790300](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-42-x-72-x-10mm-sku-64790300/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 42 x 72 x 8mm SKU: 64790299](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-42-x-72-x-8mm-sku-64790299/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 42 x 65 x 10mm SKU: 64790295](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-42-x-65-x-10mm-sku-64790295/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 42 x 62 x 10mm SKU: 64790294](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-42-x-62-x-10mm-sku-64790294/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 42 x 62 x 8mm SKU: 64790293](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-42-x-62-x-8mm-sku-64790293/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 42 x 62 x 7mm SKU: 64790292](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-42-x-62-x-7mm-sku-64790292/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 42 x 60 x 7mm SKU: 64790291](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-42-x-60-x-7mm-sku-64790291/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 42 x 55 x 8mm SKU: 64790289](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-42-x-55-x-8mm-sku-64790289/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 42 x 55 x 7mm SKU: 64790288](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-42-x-55-x-7mm-sku-64790288/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 80 x 10mm SKU: 64790282](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-80-x-10mm-sku-64790282/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 72 x 10mm SKU: 64790280](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-72-x-10mm-sku-64790280/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 72 x 7mm SKU: 64790279](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-72-x-7mm-sku-64790279/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 68 x 10mm SKU: 64790277](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-68-x-10mm-sku-64790277/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 68 x 8mm SKU: 64790276](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-68-x-8mm-sku-64790276/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 65 x 10mm SKU: 64790274](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-65-x-10mm-sku-64790274/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 62 x 10mm SKU: 64790273](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-62-x-10mm-sku-64790273/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 62 x 8mm SKU: 64790272](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-62-x-8mm-sku-64790272/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 62 x 7mm SKU: 64790271](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-62-x-7mm-sku-64790271/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 60 x 10mm SKU: 64790269](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-60-x-10mm-sku-64790269/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 58 x 10mm SKU: 64790267](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-58-x-10mm-sku-64790267/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 56 x 8mm SKU: 64790264](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-56-x-8mm-sku-64790264/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 55 x 8mm SKU: 64790263](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-55-x-8mm-sku-64790263/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 55 x 7mm SKU: 64790262](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-55-x-7mm-sku-64790262/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 52 x 8mm SKU: 64790261](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-52-x-8mm-sku-64790261/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 40 x 52 x 7mm SKU: 64790260](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-40-x-52-x-7mm-sku-64790260/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 38 x 72 x 10mm SKU: 64790256](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-38-x-72-x-10mm-sku-64790256/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 38 x 62 x 10mm SKU: 64790255](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-38-x-62-x-10mm-sku-64790255/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 38 x 55 x 7mm SKU: 64790247](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-38-x-55-x-7mm-sku-64790247/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 38 x 52 x 8mm SKU: 64790245](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-38-x-52-x-8mm-sku-64790245/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 38 x 52 x 7mm SKU: 64790244](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-38-x-52-x-7mm-sku-64790244/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 38 x 50 x 7mm SKU: 64790243](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-38-x-50-x-7mm-sku-64790243/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 36 x 52 x 7mm SKU: 64790239](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-36-x-52-x-7mm-sku-64790239/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 36 x 50 x 7mm SKU: 64790238](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-36-x-50-x-7mm-sku-64790238/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 36 x 47 x 7mm SKU: 64790237](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-36-x-47-x-7mm-sku-64790237/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 80 x 12mm SKU: 64790236](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-80-x-12mm-sku-64790236/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 72 x 12mm SKU: 64790235](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-72-x-12mm-sku-64790235/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 72 x 10mm SKU: 64790234](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-72-x-10mm-sku-64790234/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 62 x 10mm SKU: 64790232](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-62-x-10mm-sku-64790232/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 62 x 8mm SKU: 64790231](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-62-x-8mm-sku-64790231/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 62 x 7mm SKU: 64790230](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-62-x-7mm-sku-64790230/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 58 x 10mm SKU: 64790228](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-58-x-10mm-sku-64790228/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 56 x 10mm SKU: 64790227](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-56-x-10mm-sku-64790227/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 55 x 10mm SKU: 64790226](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-55-x-10mm-sku-64790226/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 55 x 8mm SKU: 64790225](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-55-x-8mm-sku-64790225/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 55 x 7mm SKU: 64790224](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-55-x-7mm-sku-64790224/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 52 x 10mm SKU: 64790222](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-52-x-10mm-sku-64790222/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 52 x 8mm SKU: 64790221](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-52-x-8mm-sku-64790221/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 52 x 7mm SKU: 64790220](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-52-x-7mm-sku-64790220/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 50 x 10mm SKU: 64790219](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-50-x-10mm-sku-64790219/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 50 x 8mm SKU: 64790218](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-50-x-8mm-sku-64790218/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 50 x 7mm SKU: 64790217](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-50-x-7mm-sku-64790217/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 47 x 7mm SKU: 64790213](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-47-x-7mm-sku-64790213/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 35 x 45 x 7mm SKU: 64790211](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-35-x-45-x-7mm-sku-64790211/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 34 x 62 x 10mm SKU: 64790210](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-34-x-62-x-10mm-sku-64790210/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 33 x 45 x 7mm SKU: 64790205](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-33-x-45-x-7mm-sku-64790205/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 32 x 62 x 10mm SKU: 64790202](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-32-x-62-x-10mm-sku-64790202/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 32 x 52 x 7mm SKU: 64790198](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-32-x-52-x-7mm-sku-64790198/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 32 x 50 x 10mm SKU: 64790197](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-32-x-50-x-10mm-sku-64790197/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 32 x 50 x 8mm SKU: 64790196](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-32-x-50-x-8mm-sku-64790196/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 32 x 47 x 7mm SKU: 64790192](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-32-x-47-x-7mm-sku-64790192/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 32 x 45 x 7mm SKU: 64790189](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-32-x-45-x-7mm-sku-64790189/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 32 x 42 x 7mm SKU: 64790186](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-32-x-42-x-7mm-sku-64790186/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 72 x 10mm SKU: 64790185](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-72-x-10mm-sku-64790185/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 62 x 10mm SKU: 64790184](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-62-x-10mm-sku-64790184/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 62 x 7mm SKU: 64790183](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-62-x-7mm-sku-64790183/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 55 x 10mm SKU: 64790182](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-55-x-10mm-sku-64790182/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 55 x 7mm SKU: 64790181](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-55-x-7mm-sku-64790181/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 52 x 10mm SKU: 64790180](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-52-x-10mm-sku-64790180/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 52 x 8mm SKU: 64790179](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-52-x-8mm-sku-64790179/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 52 x 7mm SKU: 64790178](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-52-x-7mm-sku-64790178/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 50 x 10mm SKU: 64790177](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-50-x-10mm-sku-64790177/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 50 x 7mm SKU: 64790176](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-50-x-7mm-sku-64790176/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 47 x 10mm SKU: 64790173](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-47-x-10mm-sku-64790173/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 47 x 8mm SKU: 64790172](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-47-x-8mm-sku-64790172/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 47 x 7mm SKU: 64790171](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-47-x-7mm-sku-64790171/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 46 x 7mm SKU: 64790169](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-46-x-7mm-sku-64790169/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 45 x 8mm SKU: 64790168](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-45-x-8mm-sku-64790168/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 45 x 7mm SKU: 64790167](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-45-x-7mm-sku-64790167/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 42 x 8mm SKU: 64790165](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-42-x-8mm-sku-64790165/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 42 x 7mm SKU: 64790164](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-42-x-7mm-sku-64790164/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 30 x 40 x 7mm SKU: 64790161](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-30-x-40-x-7mm-sku-64790161/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 28 x 52 x 10mm SKU: 64790160](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-28-x-52-x-10mm-sku-64790160/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 28 x 52 x 7mm SKU: 64790159](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-28-x-52-x-7mm-sku-64790159/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 28 x 47 x 7mm SKU: 64790157](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-28-x-47-x-7mm-sku-64790157/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 28 x 42 x 8mm SKU: 64790154](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-28-x-42-x-8mm-sku-64790154/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 28 x 42 x 7mm SKU: 64790153](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-28-x-42-x-7mm-sku-64790153/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 28 x 40 x 7mm SKU: 64790151](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-28-x-40-x-7mm-sku-64790151/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 28 x 38 x 7mm SKU: 64790149](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-28-x-38-x-7mm-sku-64790149/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 27 x 37 x 7mm SKU: 64790144](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-27-x-37-x-7mm-sku-64790144/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 26 x 47 x 7mm SKU: 64790143](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-26-x-47-x-7mm-sku-64790143/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 26 x 38 x 7mm SKU: 64790141](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-26-x-38-x-7mm-sku-64790141/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 26 x 38 x 5mm SKU: 64790140](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-26-x-38-x-5mm-sku-64790140/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 26 x 37 x 7mm SKU: 64790139](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-26-x-37-x-7mm-sku-64790139/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 62 x 10mm SKU: 64790137](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-62-x-10mm-sku-64790137/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 62 x 7mm SKU: 64790135](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-62-x-7mm-sku-64790135/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 25 x 52 x 10mm SKU: 64790134](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-25-x-52-x-10mm-sku-64790134/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Bevel gear set spiral toothed module 1.3 number of teeth 16/32 i=2:1 material steel 42CrMo4 teeth hardened SKU: 38565800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-16-32-i21-material-steel-42crmo4-teeth-hardened-sku-38565800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 16/24 i=1,5:1 material steel 42CrMo4 teeth hardened SKU: 38564800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-16-24-i151-material-steel-42crmo4-teeth-hardened-sku-38564800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 30/30 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38562000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-30-30-i11-material-steel-42crmo4-teeth-hardened-sku-38562000/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 25/25 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38561600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-25-25-i11-material-steel-42crmo4-teeth-hardened-sku-38561600/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 20/20 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38561100](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-20-20-i11-material-steel-42crmo4-teeth-hardened-sku-38561100/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 16/64 i=4:1 material steel 42CrMo4 teeth hardened SKU: 38559400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-16-64-i41-material-steel-42crmo4-teeth-hardened-sku-38559400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 16/48 i=3:1 material steel 42CrMo4 teeth hardened SKU: 38558400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-16-48-i31-material-steel-42crmo4-teeth-hardened-sku-38558400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 20/50 i=2.5:1 material steel 42CrMo4 teeth hardened SKU: 38557200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-20-50-i2-51-material-steel-42crmo4-teeth-hardened-sku-38557200/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 20/40 i=2:1 material steel 42CrMo4 teeth hardened SKU: 38556000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-20-40-i21-material-steel-42crmo4-teeth-hardened-sku-38556000/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 15/31 i=2.066:1 material steel 42CrMo4 teeth hardened SKU: 38555600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-15-31-i2-0661-material-steel-42crmo4-teeth-hardened-sku-38555600/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed, module 1 number of teeth 20/30 i=1.5:1 material steel 42CrMo4 teeth hardened SKU: 38555200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-20-30-i1-51-material-steel-42crmo4-teeth-hardened-sku-38555200/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 13/21 i=1.615:1 material steel 42CrMo4 teeth hardened SKU: 38555000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-13-21-i1-6151-material-steel-42crmo4-teeth-hardened-sku-38555000/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 30/30 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38552000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-30-30-i11-material-steel-42crmo4-teeth-hardened-sku-38552000/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 25/25 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38551600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-25-25-i11-material-steel-42crmo4-teeth-hardened-sku-38551600/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 20/20 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38551100](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-20-20-i11-material-steel-42crmo4-teeth-hardened-sku-38551100/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1 number of teeth 16/16 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38550800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-number-of-teeth-16-16-i11-material-steel-42crmo4-teeth-hardened-sku-38550800/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 20/60 i=3:1 material steel 42CrMo4 teeth hardened SKU: 38537800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-20-60-i31-material-steel-42crmo4-teeth-hardened-sku-38537800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 22/55 i=2.5:1 material steel 42CrMo4 teeth hardened SKU: 38537400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-22-55-i2-51-material-steel-42crmo4-teeth-hardened-sku-38537400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 22/44 i=2:1 material steel 42CrMo4 teeth hardened SKU: 38536200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-22-44-i21-material-steel-42crmo4-teeth-hardened-sku-38536200/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 22/33 i=1.5:1 material steel 42CrMo4 teeth hardened SKU: 38535400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-22-33-i1-51-material-steel-42crmo4-teeth-hardened-sku-38535400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 35/35 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38532200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-35-35-i11-material-steel-42crmo4-teeth-hardened-sku-38532200/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 30/30 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38532000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-30-30-i11-material-steel-42crmo4-teeth-hardened-sku-38532000/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 25/25 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38531600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-25-25-i11-material-steel-42crmo4-teeth-hardened-sku-38531600/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 20/20 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38531000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-20-20-i11-material-steel-42crmo4-teeth-hardened-sku-38531000/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 0.6 number of teeth 16/16 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38530800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-0-6-number-of-teeth-16-16-i11-material-steel-42crmo4-teeth-hardened-sku-38530800/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3.5 number of teeth 26/26 i=1:1 material steel 16MnCr5 not hardened SKU: 38151900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-5-number-of-teeth-26-26-i11-material-steel-16mncr5-not-hardened-sku-38151900/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 14/28 i=2:1 material steel 16MnCr5 not hardened SKU: 38145700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-14-28-i21-material-steel-16mncr5-not-hardened-sku-38145700/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 11/22 i=2:1 material steel 16MnCr5 not hardened SKU: 38115500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-11-22-i21-material-steel-16mncr5-not-hardened-sku-38115500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.269 number of teeth 12/24 i=2:1 material steel 16MnCr5 not hardened SKU: 38105500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-269-number-of-teeth-12-24-i21-material-steel-16mncr5-not-hardened-sku-38105500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2 number of teeth 26/26 i=1:1 material steel 16MnCr5 not hardened SKU: 38101900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-number-of-teeth-26-26-i11-material-steel-16mncr5-not-hardened-sku-38101900/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear made of steel module 8 20 teeth i=1:1 SKU: 36771100](https://maedler.in/product/bevel-gear-made-of-steel-module-8-20-teeth-i11-sku-36771100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 45 teeth i=3:1 SKU: 36737700](https://maedler.in/product/bevel-gear-made-of-steel-module-6-45-teeth-i31-sku-36737700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 6 15 teeth i=3:1 SKU: 36737600](https://maedler.in/product/bevel-gear-made-of-steel-module-6-15-teeth-i31-sku-36737600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 6 40 teeth i=2:1 SKU: 36736100](https://maedler.in/product/bevel-gear-made-of-steel-module-6-40-teeth-i21-sku-36736100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 6 20 teeth i=2:1 SKU: 36736000](https://maedler.in/product/bevel-gear-made-of-steel-module-6-20-teeth-i21-sku-36736000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 6 40 teeth i=1:1 SKU: 36732600](https://maedler.in/product/bevel-gear-made-of-steel-module-6-40-teeth-i11-sku-36732600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 30 teeth i=1:1 SKU: 36732000](https://maedler.in/product/bevel-gear-made-of-steel-module-6-30-teeth-i11-sku-36732000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 25 teeth i=1:1 SKU: 36731600](https://maedler.in/product/bevel-gear-made-of-steel-module-6-25-teeth-i11-sku-36731600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 20 teeth i=1:1 SKU: 36731100](https://maedler.in/product/bevel-gear-made-of-steel-module-6-20-teeth-i11-sku-36731100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 6 18 teeth i=1:1 SKU: 36730900](https://maedler.in/product/bevel-gear-made-of-steel-module-6-18-teeth-i11-sku-36730900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 48 teeth i=3:1 milled SKU: 36218100](https://maedler.in/product/bevel-gear-made-of-steel-module-5-48-teeth-i31-milled-sku-36218100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 16 teeth i=3:1 milled SKU: 36218000](https://maedler.in/product/bevel-gear-made-of-steel-module-5-16-teeth-i31-milled-sku-36218000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 45 teeth i=3:1 milled SKU: 36217700](https://maedler.in/product/bevel-gear-made-of-steel-module-5-45-teeth-i31-milled-sku-36217700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 15 teeth i=3:1 milled SKU: 36217600](https://maedler.in/product/bevel-gear-made-of-steel-module-5-15-teeth-i31-milled-sku-36217600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 45 teeth i=2.5:1 milled SKU: 36216900](https://maedler.in/product/bevel-gear-made-of-steel-module-5-45-teeth-i2-51-milled-sku-36216900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 18 teeth i=2.5:1 milled SKU: 36216800](https://maedler.in/product/bevel-gear-made-of-steel-module-5-18-teeth-i2-51-milled-sku-36216800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 40 teeth i=2:1 milled SKU: 36216100](https://maedler.in/product/bevel-gear-made-of-steel-module-5-40-teeth-i21-milled-sku-36216100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 20 teeth i=2:1 milled SKU: 36216000](https://maedler.in/product/bevel-gear-made-of-steel-module-5-20-teeth-i21-milled-sku-36216000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 30 teeth i=2:1 milled SKU: 36215700](https://maedler.in/product/bevel-gear-made-of-steel-module-5-30-teeth-i21-milled-sku-36215700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 15 teeth i=2:1 milled SKU: 36215600](https://maedler.in/product/bevel-gear-made-of-steel-module-5-15-teeth-i21-milled-sku-36215600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 30 teeth i=1:5 milled SKU: 36215300](https://maedler.in/product/bevel-gear-made-of-steel-module-5-30-teeth-i15-milled-sku-36215300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 20 teeth i=1:5 milled SKU: 36215200](https://maedler.in/product/bevel-gear-made-of-steel-module-5-20-teeth-i15-milled-sku-36215200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 20 teeth i=2.5:1 milled SKU: 36214500](https://maedler.in/product/bevel-gear-made-of-steel-module-5-20-teeth-i2-51-milled-sku-36214500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 16 teeth i=2.5:1 milled SKU: 36214400](https://maedler.in/product/bevel-gear-made-of-steel-module-5-16-teeth-i2-51-milled-sku-36214400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 5 40 teeth i=1:1 milled SKU: 36212600](https://maedler.in/product/bevel-gear-made-of-steel-module-5-40-teeth-i11-milled-sku-36212600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 30 teeth i=1:1 milled SKU: 36212000](https://maedler.in/product/bevel-gear-made-of-steel-module-5-30-teeth-i11-milled-sku-36212000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 25 teeth i=1:1 milled SKU: 36211600](https://maedler.in/product/bevel-gear-made-of-steel-module-5-25-teeth-i11-milled-sku-36211600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 22 teeth i=1:1 milled SKU: 36211300](https://maedler.in/product/bevel-gear-made-of-steel-module-5-22-teeth-i11-milled-sku-36211300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 20 teeth i=1:1 milled SKU: 36211100](https://maedler.in/product/bevel-gear-made-of-steel-module-5-20-teeth-i11-milled-sku-36211100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 18 teeth i=1:1 milled SKU: 36210900](https://maedler.in/product/bevel-gear-made-of-steel-module-5-18-teeth-i11-milled-sku-36210900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 5 16 teeth i=1:1 milled SKU: 36210700](https://maedler.in/product/bevel-gear-made-of-steel-module-5-16-teeth-i11-milled-sku-36210700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 60 teeth i=4:1 milled SKU: 36189300](https://maedler.in/product/bevel-gear-made-of-steel-module-4-60-teeth-i41-milled-sku-36189300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 15 teeth i=4:1 milled SKU: 36189200](https://maedler.in/product/bevel-gear-made-of-steel-module-4-15-teeth-i41-milled-sku-36189200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 56 teeth i=3.5:1 milled SKU: 36188500](https://maedler.in/product/bevel-gear-made-of-steel-module-4-56-teeth-i3-51-milled-sku-36188500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=3.5:1 milled SKU: 36188400](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i3-51-milled-sku-36188400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 48 teeth i=3:1 milled SKU: 36188100](https://maedler.in/product/bevel-gear-made-of-steel-module-4-48-teeth-i31-milled-sku-36188100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=3:1 milled SKU: 36188000](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i31-milled-sku-36188000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 45 teeth i=2.5:1 milled SKU: 36186900](https://maedler.in/product/bevel-gear-made-of-steel-module-4-45-teeth-i2-51-milled-sku-36186900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 18 teeth i=2.5:1 milled SKU: 36186800](https://maedler.in/product/bevel-gear-made-of-steel-module-4-18-teeth-i2-51-milled-sku-36186800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 40 teeth i=2.5:1 milled SKU: 36186500](https://maedler.in/product/bevel-gear-made-of-steel-module-4-40-teeth-i2-51-milled-sku-36186500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=2.5:1 milled SKU: 36186400](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i2-51-milled-sku-36186400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 40 teeth i=2:1 milled SKU: 36186100](https://maedler.in/product/bevel-gear-made-of-steel-module-4-40-teeth-i21-milled-sku-36186100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 20 teeth i=2:1 milled SKU: 36186000](https://maedler.in/product/bevel-gear-made-of-steel-module-4-20-teeth-i21-milled-sku-36186000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 30 teeth i=2:1 milled SKU: 36185700](https://maedler.in/product/bevel-gear-made-of-steel-module-4-30-teeth-i21-milled-sku-36185700/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 15 teeth i=2:1 milled SKU: 36185600](https://maedler.in/product/bevel-gear-made-of-steel-module-4-15-teeth-i21-milled-sku-36185600/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 30 teeth i=1.5:1 milled SKU: 36185300](https://maedler.in/product/bevel-gear-made-of-steel-module-4-30-teeth-i1-51-milled-sku-36185300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 20 teeth i=1.5:1 milled SKU: 36185200](https://maedler.in/product/bevel-gear-made-of-steel-module-4-20-teeth-i1-51-milled-sku-36185200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 24 teeth i=1.5:1 milled SKU: 36184900](https://maedler.in/product/bevel-gear-made-of-steel-module-4-24-teeth-i1-51-milled-sku-36184900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=1.5:1 milled SKU: 36184800](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i1-51-milled-sku-36184800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 20 teeth i=1.25:1 milled SKU: 36184500](https://maedler.in/product/bevel-gear-made-of-steel-module-4-20-teeth-i1-251-milled-sku-36184500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 16 teeth i=1.25:1 milled SKU: 36184400](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i1-251-milled-sku-36184400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 4 40 teeth i=1:1 milled SKU: 36182600](https://maedler.in/product/bevel-gear-made-of-steel-module-4-40-teeth-i11-milled-sku-36182600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 30 teeth i=1:1 milled SKU: 36182000](https://maedler.in/product/bevel-gear-made-of-steel-module-4-30-teeth-i11-milled-sku-36182000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 25 teeth i=1:1 milled SKU: 36181600](https://maedler.in/product/bevel-gear-made-of-steel-module-4-25-teeth-i11-milled-sku-36181600/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 22 teeth i=1:1 milled SKU: 36181300](https://maedler.in/product/bevel-gear-made-of-steel-module-4-22-teeth-i11-milled-sku-36181300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 20 teeth i=1:1 milled SKU: 36181100](https://maedler.in/product/bevel-gear-made-of-steel-module-4-20-teeth-i11-milled-sku-36181100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 18 teeth i=1:1 milled SKU: 36180900](https://maedler.in/product/bevel-gear-made-of-steel-module-4-18-teeth-i11-milled-sku-36180900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 4 16 teeth i=1:1 milled SKU: 36180700](https://maedler.in/product/bevel-gear-made-of-steel-module-4-16-teeth-i11-milled-sku-36180700/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth. - [Bevel gear made of steel module 3 60 teeth i=4:1 milled SKU: 36149300](https://maedler.in/product/bevel-gear-made-of-steel-module-3-60-teeth-i41-milled-sku-36149300/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 15 teeth i=4:1 milled SKU: 36149200](https://maedler.in/product/bevel-gear-made-of-steel-module-3-15-teeth-i41-milled-sku-36149200/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 56 teeth i=3.5:1 milled SKU: 36148500](https://maedler.in/product/bevel-gear-made-of-steel-module-3-56-teeth-i3-51-milled-sku-36148500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=3.5:1 milled SKU: 36148400](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i3-51-milled-sku-36148400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 48 teeth i=3:1 milled SKU: 36148100](https://maedler.in/product/bevel-gear-made-of-steel-module-3-48-teeth-i31-milled-sku-36148100/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=3:1 milled SKU: 36148000](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i31-milled-sku-36148000/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 45 teeth i=2.5:1 milled SKU: 36146900](https://maedler.in/product/bevel-gear-made-of-steel-module-3-45-teeth-i2-51-milled-sku-36146900/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 18 teeth i=2.5:1 milled SKU: 36146800](https://maedler.in/product/bevel-gear-made-of-steel-module-3-18-teeth-i2-51-milled-sku-36146800/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 40 teeth i=2.5:1 milled SKU: 36146500](https://maedler.in/product/bevel-gear-made-of-steel-module-3-40-teeth-i2-51-milled-sku-36146500/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 16 teeth i=2.5:1 milled SKU: 36146400](https://maedler.in/product/bevel-gear-made-of-steel-module-3-16-teeth-i2-51-milled-sku-36146400/): Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).With crowned, milled teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 40 teeth i=2:1 milled SKU: 36146100](https://maedler.in/product/bevel-gear-made-of-steel-module-3-40-teeth-i21-milled-sku-36146100/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [Bevel gear made of steel module 3 20 teeth i=2:1 milled SKU: 36146000](https://maedler.in/product/bevel-gear-made-of-steel-module-3-20-teeth-i21-milled-sku-36146000/): Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45.Tooth quality 8 modelled on DIN 3967 (from module 2).Up to module 5 with crowned, milled teeth.From module 6 with planed teeth. Not hardened – not lapped.Shaft angle = 90º.The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio. - [splined hub DIN 5480 20 x 1,25 x 14 length 40mm material 16MnCr5 SKU: 64822000](https://maedler.in/product/splined-hub-din-5480-20-x-125-x-14-length-40mm-material-16mncr5-sku-64822000/): Material: Steel 16MnCr5. Sleeves for toothed shafts with profile DIN 5480. For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding shafts DIN 5480. Module 1.25. Pressure angle 30°. Tolerance 9H. - [Mounting hub with profile DIN 5480 15 x 1,25 x 10 length 25mm flange diameter 58mm material C45 SKU: 64821510](https://maedler.in/product/mounting-hub-with-profile-din-5480-15-x-125-x-10-length-25mm-flange-diameter-58mm-material-c45-sku-64821510/): Material: Steel C45. Hub with flange, for toothed shafts profile DIN 5480. As connecting element for torque transmission and centring. Easy sliding fit with our toothed shafts profile DIN 5480. The positon of the bore holes does not refer to the toothing. Module 1.25. Pressure angle 30°. Tolerance field 9H. - [splined hub DIN 5480 15 x 1,25 x 10 length 40mm material 16MnCr5 SKU: 64821500](https://maedler.in/product/splined-hub-din-5480-15-x-125-x-10-length-40mm-material-16mncr5-sku-64821500/): Material: Steel 16MnCr5. Sleeves for toothed shafts with profile DIN 5480. For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding shafts DIN 5480. Module 1.25. Pressure angle 30°. Tolerance 9H. - [Toothed shaft DIN 5480 38 x 1,25 x 29 length 500mm material C45 milled SKU: 64813800](https://maedler.in/product/toothed-shaft-din-5480-38-x-125-x-29-length-500mm-material-c45-milled-sku-64813800/): Material: steel C45, milled. Toothed shafts with profile DIN 5480, toothed on the complete length. For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding hubs and flanged hubs DIN 5480. Module 1.25. Pressure angle 30°. Tolerance 8f. - [Toothed shaft DIN 5480 25 x 1,25 x 18 profile length 145mm total legth 500mm material C35 milled SKU: 64812511](https://maedler.in/product/toothed-shaft-din-5480-25-x-125-x-18-profile-length-145mm-total-legth-500mm-material-c35-milled-sku-64812511/): Material: steel C35K, milled.Toothed shafts with profile DIN 5480, toothed on partial length L1, with onesided solid shaft end.For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding hubs and flanged hubs DIN 5480. The smooth shaft ending with diameter tolerance h6 can be used as bearing seat. Module 1.25. Pressure angle 30°. Tolerance 8f. - [Toothed shaft DIN 5480 25 x 1,25 x 18 length 500mm material C45 milled SKU: 64812500](https://maedler.in/product/toothed-shaft-din-5480-25-x-125-x-18-length-500mm-material-c45-milled-sku-64812500/): Material: steel C45, milled.Toothed shafts with profile DIN 5480, toothed on the complete length.For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding hubs and flanged hubs DIN 5480.Module 1.25. Pressure angle 30°. Tolerance 8f. - [Toothed shaft DIN 5480 20 x 1,25 x 14 profile length 145mm total legth 500mm material C35 milled SKU: 64812011](https://maedler.in/product/toothed-shaft-din-5480-20-x-125-x-14-profile-length-145mm-total-legth-500mm-material-c35-milled-sku-64812011/): Material: steel C35K, milled.Toothed shafts with profile DIN 5480, toothed on partial length L1, with onesided solid shaft end.For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding hubs and flanged hubs DIN 5480. The smooth shaft ending with diameter tolerance h6 can be used as bearing seat. Module 1.25. Pressure angle 30°. Tolerance 8f. - [Toothed shaft DIN 5480 20 x 1,25 x 14 length 500mm material C45 milled SKU: 64812000](https://maedler.in/product/toothed-shaft-din-5480-20-x-125-x-14-length-500mm-material-c45-milled-sku-64812000/): Material: steel C45, milled.Toothed shafts with profile DIN 5480, toothed on the complete length.For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding hubs and flanged hubs DIN 5480.Module 1.25. Pressure angle 30°. Tolerance 8f. - [Toothed shaft DIN 5480 15 x 1,25 x 10 profile length 145mm total legth 500mm material C35 milled SKU: 64811511](https://maedler.in/product/toothed-shaft-din-5480-15-x-125-x-10-profile-length-145mm-total-legth-500mm-material-c35-milled-sku-64811511/): Material: steel C35K, milled.Toothed shafts with profile DIN 5480, toothed on partial length L1, with onesided solid shaft end.For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding hubs and flanged hubs DIN 5480. The smooth shaft ending with diameter tolerance h6 can be used as bearing seat. Module 1.25. Pressure angle 30°. Tolerance 8f. - [Toothed shaft DIN 5480 15 x 1,25 x 10 length 500mm material C45 milled SKU: 64811500](https://maedler.in/product/toothed-shaft-din-5480-15-x-125-x-10-length-500mm-material-c45-milled-sku-64811500/): Material: steel C45, milled.Toothed shafts with profile DIN 5480, toothed on the complete length.For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding hubs and flanged hubs DIN 5480.Module 1.25. Pressure angle 30°. Tolerance 8f. - [Splined shaft similar to DIN 14 profile KW 46x54 x 6000mm long steel C45 SKU: 64808400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-6000mm-long-steel-c45-sku-64808400/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x approx. 6000mm long steel C45 SKU: 64808200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-approx-6000mm-long-steel-c45-sku-64808200/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x approx. 6000mm long steel C45 SKU: 64808000](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-approx-6000mm-long-steel-c45-sku-64808000/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x approx. 6000mm long steel C45 SKU: 64807900](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-approx-6000mm-long-steel-c45-sku-64807900/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x approx. 6000mm long steel C45 SKU: 64807800](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-approx-6000mm-long-steel-c45-sku-64807800/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x approx. 6000mm long steel C45 SKU: 64807700](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-approx-6000mm-long-steel-c45-sku-64807700/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x approx. 6000mm long steel C45 SKU: 64807600](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-approx-6000mm-long-steel-c45-sku-64807600/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x approx. 6000mm long steel C45 SKU: 64807500](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-approx-6000mm-long-steel-c45-sku-64807500/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x approx. 6000mm long steel C45 SKU: 64807400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-approx-6000mm-long-steel-c45-sku-64807400/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x approx. 6000mm long steel C45 SKU: 64807300](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-approx-6000mm-long-steel-c45-sku-64807300/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 11X14 x approx. 6000mm long steel C45 SKU: 64807200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-approx-6000mm-long-steel-c45-sku-64807200/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x approx. 6000mm long steel C45 SKU: 64807100](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-approx-6000mm-long-steel-c45-sku-64807100/): Material: Steel C45, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 50h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799550](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-50h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799550/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 40h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799540](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-40h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799540/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 30h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799530](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-30h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799530/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 25h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799525](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-25h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799525/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 20h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799520](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-20h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799520/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 16h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799516](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-16h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799516/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 14h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799514](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-14h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799514/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 12h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799512](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-12h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799512/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 10h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799510](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-10h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799510/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 8h6 x 2000mm long cutting surface marked with yellow paint SKU: 64799508](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-8h6-x-2000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799508/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 50h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799450](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-50h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799450/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 40h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799440](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-40h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799440/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 30h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799430](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-30h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799430/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 25h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799425](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-25h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799425/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 20h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799420](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-20h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799420/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 16h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799416](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-16h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799416/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 14h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799414](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-14h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799414/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 12h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799412](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-12h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799412/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 10h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799410](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-10h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799410/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 8h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799408](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-8h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799408/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 6h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799406](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-6h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799406/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 5h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799405](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-5h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799405/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 4h6 x 1000mm long cutting surface marked with yellow paint SKU: 64799404](https://maedler.in/product/precision-shaft-steel-x90-stainless-hardened-min-54-hrc-and-ground-diameter-4h6-x-1000mm-long-cutting-surface-marked-with-yellow-paint-sku-64799404/): Material: Stainless steel 1.4112 (X90CrMoV18). Hardness min. 54 HRC. Diameter tolerance: ISO h6. Dimension-stable up to +120°C. In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 50h6 x 2000mm long cutting surface marked with red paint SKU: 64799350](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-50h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799350/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 40h6 x 2000mm long cutting surface marked with red paint SKU: 64799340](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-40h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799340/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 30h6 x 2000mm long cutting surface marked with red paint SKU: 64799330](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-30h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799330/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 25h6 x 2000mm long cutting surface marked with red paint SKU: 64799325](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-25h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799325/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 20h6 x 2000mm long cutting surface marked with red paint SKU: 64799320](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-20h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799320/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 16h6 x 2000mm long cutting surface marked with red paint SKU: 64799316](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-16h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799316/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 14h6 x 2000mm long cutting surface marked with red paint SKU: 64799314](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-14h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799314/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 12h6 x 2000mm long cutting surface marked with red paint SKU: 64799312](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-12h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799312/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 10h6 x 2000mm long cutting surface marked with red paint SKU: 64799310](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-10h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799310/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 8h6 x 2000mm long cutting surface marked with red paint SKU: 64799308](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-8h6-x-2000mm-long-cutting-surface-marked-with-red-paint-sku-64799308/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 50h6 x 1000mm long cutting surface marked with red paint SKU: 64799250](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-50h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799250/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 40h6 x 1000mm long cutting surface marked with red paint SKU: 64799240](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-40h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799240/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 30h6 x 1000mm long cutting surface marked with red paint SKU: 64799230](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-30h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799230/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 25h6 x 1000mm long cutting surface marked with red paint SKU: 64799225](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-25h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799225/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 20h6 x 1000mm long cutting surface marked with red paint SKU: 64799220](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-20h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799220/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 16h6 x 1000mm long cutting surface marked with red paint SKU: 64799216](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-16h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799216/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 14h6 x 1000mm long cutting surface marked with red paint SKU: 64799214](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-14h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799214/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 12h6 x 1000mm long cutting surface marked with red paint SKU: 64799212](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-12h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799212/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 10h6 x 1000mm long cutting surface marked with red paint SKU: 64799210](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-10h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799210/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 8h6 x 1000mm long cutting surface marked with red paint SKU: 64799208](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-8h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799208/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Precision shaft steel X46 stainless hardened min. 52 HRC and ground diameter 6h6 x 1000mm long cutting surface marked with red paint SKU: 64799206](https://maedler.in/product/precision-shaft-steel-x46-stainless-hardened-min-52-hrc-and-ground-diameter-6h6-x-1000mm-long-cutting-surface-marked-with-red-paint-sku-64799206/): Material: Stainless steel 1.4043 (X46Cr13), min. 52 HRC.Diameter tolerance: ISO h6.Dimension-stable up to +120°C.In lengths of 1 m and 2 m available ex stock. Fixed lengths can be delivered on request. - [Radial shaft seal type A with one sealing lip 50 x 90 x 10mm SKU: 64790349](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-90-x-10mm-sku-64790349/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 85 x 10mm SKU: 64790348](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-85-x-10mm-sku-64790348/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 80 x 10mm SKU: 64790347](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-80-x-10mm-sku-64790347/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 80 x 8mm SKU: 64790346](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-80-x-8mm-sku-64790346/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 75 x 10mm SKU: 64790345](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-75-x-10mm-sku-64790345/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 72 x 12mm SKU: 64790344](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-72-x-12mm-sku-64790344/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 72 x 10mm SKU: 64790343](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-72-x-10mm-sku-64790343/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 72 x 8mm SKU: 64790342](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-72-x-8mm-sku-64790342/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 70 x 10mm SKU: 64790341](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-70-x-10mm-sku-64790341/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 68 x 10mm SKU: 64790340](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-68-x-10mm-sku-64790340/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 68 x 8mm SKU: 64790339](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-68-x-8mm-sku-64790339/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 65 x 10mm SKU: 64790338](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-65-x-10mm-sku-64790338/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 65 x 8mm SKU: 64790337](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-65-x-8mm-sku-64790337/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 50 x 62 x 7mm SKU: 64790335](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-50-x-62-x-7mm-sku-64790335/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 48 x 72 x 10mm SKU: 64790334](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-48-x-72-x-10mm-sku-64790334/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 48 x 72 x 8mm SKU: 64790333](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-48-x-72-x-8mm-sku-64790333/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 48 x 72 x 7mm SKU: 64790332](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-48-x-72-x-7mm-sku-64790332/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 48 x 65 x 10mm SKU: 64790330](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-48-x-65-x-10mm-sku-64790330/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 48 x 62 x 8mm SKU: 64790329](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-48-x-62-x-8mm-sku-64790329/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 46 x 65 x 10mm SKU: 64790326](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-46-x-65-x-10mm-sku-64790326/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 85 x 10mm SKU: 64790323](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-85-x-10mm-sku-64790323/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 80 x 10mm SKU: 64790322](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-80-x-10mm-sku-64790322/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 75 x 10mm SKU: 64790321](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-75-x-10mm-sku-64790321/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 75 x 8mm SKU: 64790320](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-75-x-8mm-sku-64790320/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 72 x 10mm SKU: 64790319](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-72-x-10mm-sku-64790319/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 72 x 8mm SKU: 64790318](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-72-x-8mm-sku-64790318/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 65 x 10mm SKU: 64790314](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-65-x-10mm-sku-64790314/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 65 x 8mm SKU: 64790313](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-65-x-8mm-sku-64790313/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 62 x 10mm SKU: 64790312](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-62-x-10mm-sku-64790312/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 62 x 8mm SKU: 64790311](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-62-x-8mm-sku-64790311/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 62 x 7mm SKU: 64790310](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-62-x-7mm-sku-64790310/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 60 x 10mm SKU: 64790309](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-60-x-10mm-sku-64790309/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 60 x 8mm SKU: 64790308](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-60-x-8mm-sku-64790308/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Radial shaft seal type A with one sealing lip 45 x 60 x 7mm SKU: 64790307](https://maedler.in/product/radial-shaft-seal-type-a-with-one-sealing-lip-45-x-60-x-7mm-sku-64790307/): Material: Elastomer: NBR. Stiffening ring and tension spring from steel.• According to DIN 3760 Design A respectively  ISO 6194-1 figure 1 and in many additional sizes.• Most common design, with one seal lip.• For oil- and grease-lubricated applications.• For high speed, sliding speed up to 14m/s.Recommended tolerances: Housing bore H8, shaft-Ø h11, Shaft roughness Ra 0.2 to 0.8 μm.Temperatur range: -40°C to +100°C (for short time up to +120°C). - [Planetary gearbox MPL size 70 ratio i=10 1-stage SKU: 40527010](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i10-1-stage-sku-40527010/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=7 1-stage SKU: 40527007](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i7-1-stage-sku-40527007/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=5 1-stage SKU: 40527005](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i5-1-stage-sku-40527005/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=3 1-stage SKU: 40527003](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i3-1-stage-sku-40527003/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=100 2-stage SKU: 40525100](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i100-2-stage-sku-40525100/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=70 2-stage SKU: 40525070](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i70-2-stage-sku-40525070/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=55 2-stage SKU: 40525050](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i55-2-stage-sku-40525050/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=35 2-stage SKU: 40525035](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i35-2-stage-sku-40525035/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=25 2-stage SKU: 40525025](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i25-2-stage-sku-40525025/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=10 1-stage SKU: 40525010](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i10-1-stage-sku-40525010/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=7 1-stage SKU: 40525007](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i7-1-stage-sku-40525007/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 50 ratio i=5 1-stage SKU: 40525005](https://maedler.in/product/planetary-gearbox-mpl-size-50-ratio-i5-1-stage-sku-40525005/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=512 3-stage SKU: 40518512](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i512-3-stage-sku-40518512/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=256 3-stage SKU: 40518256](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i256-3-stage-sku-40518256/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=200 3-stage SKU: 40518200](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i200-3-stage-sku-40518200/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=160 3-stage SKU: 40518160](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i160-3-stage-sku-40518160/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=125 3-stage SKU: 40518125](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i125-3-stage-sku-40518125/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=100 3-stage SKU: 40518100](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i100-3-stage-sku-40518100/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=80 3-stage SKU: 40518080](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i80-3-stage-sku-40518080/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=64 2-stage SKU: 40518064](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i64-2-stage-sku-40518064/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=56 2-stage SKU: 40518056](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i56-2-stage-sku-40518056/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=49 2-stage SKU: 40518049](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i49-2-stage-sku-40518049/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=40 2-stage SKU: 40518040](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i40-2-stage-sku-40518040/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=32 2-stage SKU: 40518032](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i32-2-stage-sku-40518032/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=25 2-stage SKU: 40518025](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i25-2-stage-sku-40518025/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=20 2-stage SKU: 40518020](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i20-2-stage-sku-40518020/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=16 2-stage SKU: 40518016](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i16-2-stage-sku-40518016/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=15 2-stage SKU: 40518015](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i15-2-stage-sku-40518015/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=12 2-stage SKU: 40518012](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i12-2-stage-sku-40518012/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=8 1-stage SKU: 40518008](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i8-1-stage-sku-40518008/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=7 1-stage SKU: 40518007](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i7-1-stage-sku-40518007/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=5 1-stage SKU: 40518005](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i5-1-stage-sku-40518005/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=4 1-stage SKU: 40518004](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i4-1-stage-sku-40518004/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=3 1-stage SKU: 40518003](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i3-1-stage-sku-40518003/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=512 3-stage SKU: 40516512](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i512-3-stage-sku-40516512/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=256 3-stage SKU: 40516256](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i256-3-stage-sku-40516256/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=200 3-stage SKU: 40516200](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i200-3-stage-sku-40516200/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=160 3-stage SKU: 40516160](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i160-3-stage-sku-40516160/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=125 3-stage SKU: 40516125](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i125-3-stage-sku-40516125/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=100 3-stage SKU: 40516100](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i100-3-stage-sku-40516100/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=80 3-stage SKU: 40516080](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i80-3-stage-sku-40516080/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=64 2-stage SKU: 40516064](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i64-2-stage-sku-40516064/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=56 2-stage SKU: 40516056](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i56-2-stage-sku-40516056/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=49 2-stage SKU: 40516049](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i49-2-stage-sku-40516049/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=40 2-stage SKU: 40516040](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i40-2-stage-sku-40516040/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=32 2-stage SKU: 40516032](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i32-2-stage-sku-40516032/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=25 2-stage SKU: 40516025](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i25-2-stage-sku-40516025/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=20 2-stage SKU: 40516020](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i20-2-stage-sku-40516020/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=16 2-stage SKU: 40516016](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i16-2-stage-sku-40516016/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=15 2-stage SKU: 40516015](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i15-2-stage-sku-40516015/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=12 2-stage SKU: 40516012](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i12-2-stage-sku-40516012/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=8 1-stage SKU: 40516008](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i8-1-stage-sku-40516008/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=7 1-stage SKU: 40516007](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i7-1-stage-sku-40516007/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=5 1-stage SKU: 40516005](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i5-1-stage-sku-40516005/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=4 1-stage SKU: 40516004](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i4-1-stage-sku-40516004/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 60 ratio i=3 1-stage SKU: 40516003](https://maedler.in/product/planetary-gearbox-mps-size-60-ratio-i3-1-stage-sku-40516003/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=64 2-stage SKU: 40514064](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i64-2-stage-sku-40514064/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=56 2-stage SKU: 40514056](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i56-2-stage-sku-40514056/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=49 2-stage SKU: 40514049](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i49-2-stage-sku-40514049/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=40 2-stage SKU: 40514040](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i40-2-stage-sku-40514040/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=35 2-stage SKU: 40514035](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i35-2-stage-sku-40514035/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=32 2-stage SKU: 40514032](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i32-2-stage-sku-40514032/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=28 2-stage SKU: 40514028](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i28-2-stage-sku-40514028/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=25 2-stage SKU: 40514025](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i25-2-stage-sku-40514025/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=20 2-stage SKU: 40514020](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i20-2-stage-sku-40514020/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=16 2-stage SKU: 40514016](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i16-2-stage-sku-40514016/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=8 1-stage SKU: 40514008](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i8-1-stage-sku-40514008/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=7 1-stage SKU: 40514007](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i7-1-stage-sku-40514007/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=5 1-stage SKU: 40514005](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i5-1-stage-sku-40514005/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPS size 40 ratio i=4 1-stage SKU: 40514004](https://maedler.in/product/planetary-gearbox-mps-size-40-ratio-i4-1-stage-sku-40514004/): The lightweight, low-noise and low-backlash planetary gearboxes are available in 24 ratios. They are characterized by their high power density, running smoothness and overload capacity. The 3 housing sizes 40 mm, 60 mm and 80 mm fit to many applications.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Bevel gear set spiral toothed module 3.5, number of teeth 9/27 i=3 :1 material steel 16MnCr5 teeth hardened SKU: 38657500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-5-number-of-teeth-9-27-i3-1-material-steel-16mncr5-teeth-hardened-sku-38657500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3.6 number of teeth 9/23 i=2.555..:1 material steel 16MnCr5 teeth hardened SKU: 38656300](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-6-number-of-teeth-9-23-i2-555-1-material-steel-16mncr5-teeth-hardened-sku-38656300/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3.5 number of teeth 13/26 i=2:1 material steel 16MnCr5 teeth hardened SKU: 38655500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-5-number-of-teeth-13-26-i21-material-steel-16mncr5-teeth-hardened-sku-38655500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3.5 number of teeth 24/24 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38651700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-5-number-of-teeth-24-24-i11-material-steel-16mncr5-teeth-hardened-sku-38651700/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 13/26 i=2:1 material steel 16MnCr5 teeth hardened SKU: 38645500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-13-26-i21-material-steel-16mncr5-teeth-hardened-sku-38645500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 16/24 i=1.5:1 material steel 16MnCr5 teeth hardened SKU: 38644900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-16-24-i1-51-material-steel-16mncr5-teeth-hardened-sku-38644900/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 24/24 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38641700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-24-24-i11-material-steel-16mncr5-teeth-hardened-sku-38641700/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 3 number of teeth 21/21 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38641200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-3-number-of-teeth-21-21-i11-material-steel-16mncr5-teeth-hardened-sku-38641200/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5736 number of teeth 9/27 i=3:1 material steel 16MnCr5 teeth hardened SKU: 38617500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5736-number-of-teeth-9-27-i31-material-steel-16mncr5-teeth-hardened-sku-38617500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 13/26 i=2:1 material steel 16MnCr5 teeth hardened SKU: 38615500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-13-26-i21-material-steel-16mncr5-teeth-hardened-sku-38615500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 16/24 i=1.5:1 material steel 16MnCr5 teeth hardened SKU: 38614900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-16-24-i1-51-material-steel-16mncr5-teeth-hardened-sku-38614900/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 24/24 i=1:1 material steel 16MnCr5 teeth hardened bore 20mm SKU: 38611700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-24-24-i11-material-steel-16mncr5-teeth-hardened-bore-20mm-sku-38611700/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.5 number of teeth 19/19 i=1:1 material steel 16MnCr5 teeth hardened bore 20mm SKU: 38611200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-5-number-of-teeth-19-19-i11-material-steel-16mncr5-teeth-hardened-bore-20mm-sku-38611200/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.229 number of teeth 9/27 i=3:1 material steel 16MnCr5 teeth hardened SKU: 38607500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-229-number-of-teeth-9-27-i31-material-steel-16mncr5-teeth-hardened-sku-38607500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.321 number of teeth 13/26 i=2:1 material steel 16MnCr5 teeth hardened SKU: 38605500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-321-number-of-teeth-13-26-i21-material-steel-16mncr5-teeth-hardened-sku-38605500/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2 number of teeth 16/24 i=1.5:1 material steel 16MnCr5 teeth hardened SKU: 38604900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-number-of-teeth-16-24-i1-51-material-steel-16mncr5-teeth-hardened-sku-38604900/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.236 number of teeth 24/24 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38601700](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-236-number-of-teeth-24-24-i11-material-steel-16mncr5-teeth-hardened-sku-38601700/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 2.2881 number of teeth 21/21 i=1:1 material steel 16MnCr5 teeth hardened SKU: 38601200](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-2-2881-number-of-teeth-21-21-i11-material-steel-16mncr5-teeth-hardened-sku-38601200/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 11/44 i=4:1 material steel 42CrMo4 teeth hardened SKU: 38578400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-11-44-i41-material-steel-42crmo4-teeth-hardened-sku-38578400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 10/30 i=3:1 material steel 42CrMo4 teeth hardened SKU: 38577400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-10-30-i31-material-steel-42crmo4-teeth-hardened-sku-38577400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 16/40 i=2,5:1 material steel 42CrMo4 teeth hardened SKU: 38576400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-16-40-i251-material-steel-42crmo4-teeth-hardened-sku-38576400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 16/32 i=2:1 material steel 42CrMo4 teeth hardened SKU: 38575600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-16-32-i21-material-steel-42crmo4-teeth-hardened-sku-38575600/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 16/24 i=1.5:1 material steel 42CrMo4 teeth hardened SKU: 38574800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-16-24-i1-51-material-steel-42crmo4-teeth-hardened-sku-38574800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 13/18 i=1.385:1 material steel 42CrMo4 teeth hardened SKU: 38574400](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-13-18-i1-3851-material-steel-42crmo4-teeth-hardened-sku-38574400/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 14/17 i=1.214:1 material steel 42CrMo4 teeth hardened SKU: 38574000](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-14-17-i1-2141-material-steel-42crmo4-teeth-hardened-sku-38574000/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 28/28 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38571900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-28-28-i11-material-steel-42crmo4-teeth-hardened-sku-38571900/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 24/24 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38571500](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-24-24-i11-material-steel-42crmo4-teeth-hardened-sku-38571500/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.5 number of teeth 18/18 i=1:1 material steel 42CrMo4 teeth hardened SKU: 38570900](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-5-number-of-teeth-18-18-i11-material-steel-42crmo4-teeth-hardened-sku-38570900/): Material up to module 1.5: 42CrMo4 teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened. Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 11/33 i=3:1 material steel 42CrMo4 teeth hardened SKU: 38567800](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-11-33-i31-material-steel-42crmo4-teeth-hardened-sku-38567800/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Bevel gear set spiral toothed module 1.3 number of teeth 14/35 i=2.5:1 material steel 42CrMo4 teeth hardened SKU: 38566600](https://maedler.in/product/bevel-gear-set-spiral-toothed-module-1-3-number-of-teeth-14-35-i2-51-material-steel-42crmo4-teeth-hardened-sku-38566600/): Material up to module 1.5: 42CrMo4, teeth induction hardened.Material from module 2.0: 16MnCr5, teeth case hardened.Hubs and bores soft.** Gears with ground hub contact surfaces and bores.*** Not hardened.Tooth quality 8 modelled on DIN 3967. Sold in pairs only. - [Splined shaft similar to DIN 14 profile KW 21x25 x 3000mm long steel 42CrMo4 SKU: 64887600](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-3000mm-long-steel-42crmo4-sku-64887600/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16x20 x 6000mm long steel 42CrMo4 SKU: 64887501](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-6000mm-long-steel-42crmo4-sku-64887501/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 16x20 x 3000mm long steel 42CrMo4 SKU: 64887500](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-3000mm-long-steel-42crmo4-sku-64887500/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13x16 x 6000mm long steel 42CrMo4 SKU: 64887401](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-6000mm-long-steel-42crmo4-sku-64887401/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 13x16 x 3000mm long steel 42CrMo4 SKU: 64887400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-3000mm-long-steel-42crmo4-sku-64887400/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23x28 x 6000mm long steel 42CrMo4 SKU: 64887301](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-6000mm-long-steel-42crmo4-sku-64887301/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 23x28 x 3000mm long steel 42CrMo4 SKU: 64887300](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-3000mm-long-steel-42crmo4-sku-64887300/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11x14 x 6000mm long steel 42CrMo4 SKU: 64887201](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-6000mm-long-steel-42crmo4-sku-64887201/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 11x14 x 3000mm long steel 42CrMo4 SKU: 64887200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-3000mm-long-steel-42crmo4-sku-64887200/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18x22 x 6000mm long steel 42CrMo4 SKU: 64887101](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-6000mm-long-steel-42crmo4-sku-64887101/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 18x22 x 3000mm long steel 42CrMo4 SKU: 64887100](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-3000mm-long-steel-42crmo4-sku-64887100/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 2000mm long material 42CrMo4 SKU: 64886400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-2000mm-long-material-42crmo4-sku-64886400/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36x42 x 2000mm long material 42CrMo4 SKU: 64886200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-2000mm-long-material-42crmo4-sku-64886200/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42x48 x 2000mm long material 42CrMo4 SKU: 64886000](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-2000mm-long-material-42crmo4-sku-64886000/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28x34 x 2000mm long material 42CrMo4 SKU: 64885900](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-2000mm-long-material-42crmo4-sku-64885900/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32x38 x 2000mm long material 42CrMo4 SKU: 64885800](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-2000mm-long-material-42crmo4-sku-64885800/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26x32 x 2000mm long material 42CrMo4 SKU: 64885700](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-2000mm-long-material-42crmo4-sku-64885700/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21x25 x 2000mm long material 42CrMo4 SKU: 64885600](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-2000mm-long-material-42crmo4-sku-64885600/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16x20 x 2000mm long material 42CrMo4 SKU: 64885500](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-2000mm-long-material-42crmo4-sku-64885500/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13x16 x 2000mm long material 42CrMo4 SKU: 64885400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-2000mm-long-material-42crmo4-sku-64885400/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23x28 x 2000mm long material 42CrMo4 SKU: 64885300](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-2000mm-long-material-42crmo4-sku-64885300/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11x14 x 2000mm long material 42CrMo4 SKU: 64885200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-2000mm-long-material-42crmo4-sku-64885200/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18x22 x 2000mm long material 42CrMo4 SKU: 64885100](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-2000mm-long-material-42crmo4-sku-64885100/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 1500mm long material 42CrMo4 SKU: 64884400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-1500mm-long-material-42crmo4-sku-64884400/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36x42 x 1500mm long material 42CrMo4 SKU: 64884200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-1500mm-long-material-42crmo4-sku-64884200/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42x48 x 1500mm long material 42CrMo4 SKU: 64884000](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-1500mm-long-material-42crmo4-sku-64884000/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28x34 x 1500mm long material 42CrMo4 SKU: 64883900](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-1500mm-long-material-42crmo4-sku-64883900/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32x38 x 1500mm long material 42CrMo4 SKU: 64883800](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-1500mm-long-material-42crmo4-sku-64883800/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26x32 x 1500mm long material 42CrMo4 SKU: 64883700](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-1500mm-long-material-42crmo4-sku-64883700/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21x25 x 1500mm long material 42CrMo4 SKU: 64883600](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-1500mm-long-material-42crmo4-sku-64883600/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16x20 x 1500mm long material 42CrMo4 SKU: 64883500](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-1500mm-long-material-42crmo4-sku-64883500/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13x16 x 1500mm long material 42CrMo4 SKU: 64883400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-1500mm-long-material-42crmo4-sku-64883400/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23x28 x 1500mm long material 42CrMo4 SKU: 64883300](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-1500mm-long-material-42crmo4-sku-64883300/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11x14 x 1500mm long material 42CrMo4 SKU: 64883200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-1500mm-long-material-42crmo4-sku-64883200/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18x22 x 1500mm long material 42CrMo4 SKU: 64883100](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-1500mm-long-material-42crmo4-sku-64883100/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 1000mm long material 42CrMo4 SKU: 64881400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-1000mm-long-material-42crmo4-sku-64881400/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36x42 x 1000mm long material 42CrMo4 SKU: 64881200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-1000mm-long-material-42crmo4-sku-64881200/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42x48 x 1000mm long material 42CrMo4 SKU: 64881000](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-1000mm-long-material-42crmo4-sku-64881000/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28x34 x 1000mm long material 42CrMo4 SKU: 64880900](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-1000mm-long-material-42crmo4-sku-64880900/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32x38 x 1000mm long material 42CrMo4 SKU: 64880800](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-1000mm-long-material-42crmo4-sku-64880800/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26x32 x 1000mm long material 42CrMo4 SKU: 64880700](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-1000mm-long-material-42crmo4-sku-64880700/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21x25 x 1000mm long material 42CrMo4 SKU: 64880600](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-1000mm-long-material-42crmo4-sku-64880600/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16x20 x 1000mm long material 42CrMo4 SKU: 64880500](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-1000mm-long-material-42crmo4-sku-64880500/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13x16 x 1000mm long material 42CrMo4 SKU: 64880400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-1000mm-long-material-42crmo4-sku-64880400/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23x28 x 1000mm long material 42CrMo4 SKU: 64880300](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-1000mm-long-material-42crmo4-sku-64880300/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11x14 x 1000mm long material 42CrMo4 SKU: 64880200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-1000mm-long-material-42crmo4-sku-64880200/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18x22 x 1000mm long material 42CrMo4 SKU: 64880100](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-1000mm-long-material-42crmo4-sku-64880100/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 3000mm long steel C45 SKU: 64848400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-3000mm-long-steel-c45-sku-64848400/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x 3000mm long steel C45 SKU: 64848200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-3000mm-long-steel-c45-sku-64848200/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x 3000mm long steel C45 SKU: 64848000](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-3000mm-long-steel-c45-sku-64848000/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x 3000mm long steel C45 SKU: 64847900](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-3000mm-long-steel-c45-sku-64847900/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x 3000mm long steel C45 SKU: 64847800](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-3000mm-long-steel-c45-sku-64847800/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x 3000mm long steel C45 SKU: 64847700](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-3000mm-long-steel-c45-sku-64847700/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x 3000mm long steel C45 SKU: 64847600](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-3000mm-long-steel-c45-sku-64847600/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x 3000mm long steel C45 SKU: 64847500](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-3000mm-long-steel-c45-sku-64847500/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x 3000mm long steel C45 SKU: 64847400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-3000mm-long-steel-c45-sku-64847400/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x 3000mm long steel C45 SKU: 64847300](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-3000mm-long-steel-c45-sku-64847300/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11x14 x 3000mm long steel C45 SKU: 64847200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-3000mm-long-steel-c45-sku-64847200/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x 3000mm long steel C45 SKU: 64847100](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-3000mm-long-steel-c45-sku-64847100/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 2000mm long steel C45 SKU: 64846400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-2000mm-long-steel-c45-sku-64846400/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x 2000mm long steel C45 SKU: 64846200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-2000mm-long-steel-c45-sku-64846200/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x 2000mm long steel C45 SKU: 64846000](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-2000mm-long-steel-c45-sku-64846000/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x 2000mm long steel C45 SKU: 64845900](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-2000mm-long-steel-c45-sku-64845900/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x 2000mm long steel C45 SKU: 64845800](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-2000mm-long-steel-c45-sku-64845800/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x 2000mm long steel C45 SKU: 64845700](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-2000mm-long-steel-c45-sku-64845700/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x 2000mm long steel C45 SKU: 64845600](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-2000mm-long-steel-c45-sku-64845600/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x 2000mm long steel C45 SKU: 64845500](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-2000mm-long-steel-c45-sku-64845500/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x 2000mm long steel C45 SKU: 64845400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-2000mm-long-steel-c45-sku-64845400/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x 2000mm long steel C45 SKU: 64845300](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-2000mm-long-steel-c45-sku-64845300/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11X14 x 2000mm long steel C45 SKU: 64845200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-2000mm-long-steel-c45-sku-64845200/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x 2000mm long steel C45 SKU: 64845100](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-2000mm-long-steel-c45-sku-64845100/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 1500mm long steel C45 SKU: 64844400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-1500mm-long-steel-c45-sku-64844400/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x 1500mm long steel C45 SKU: 64844200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-1500mm-long-steel-c45-sku-64844200/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x 1500mm long steel C45 SKU: 64844000](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-1500mm-long-steel-c45-sku-64844000/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x 1500mm long steel C45 SKU: 64843900](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-1500mm-long-steel-c45-sku-64843900/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x 1500mm long steel C45 SKU: 64843800](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-1500mm-long-steel-c45-sku-64843800/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x 1500mm long steel C45 SKU: 64843700](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-1500mm-long-steel-c45-sku-64843700/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x 1500mm long steel C45 SKU: 64843600](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-1500mm-long-steel-c45-sku-64843600/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x 1500mm long steel C45 SKU: 64843500](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-1500mm-long-steel-c45-sku-64843500/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x 1500mm long steel C45 SKU: 64843400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-1500mm-long-steel-c45-sku-64843400/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x 1500mm long steel C45 SKU: 64843300](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-1500mm-long-steel-c45-sku-64843300/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11X14 x 1500mm long steel C45 SKU: 64843200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-1500mm-long-steel-c45-sku-64843200/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x 1500mm long steel C45 SKU: 64843100](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-1500mm-long-steel-c45-sku-64843100/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 1000mm long steel C45 SKU: 64841400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-1000mm-long-steel-c45-sku-64841400/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x 1000mm long steel C45 SKU: 64841200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-1000mm-long-steel-c45-sku-64841200/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x 1000mm long steel C45 SKU: 64841000](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-1000mm-long-steel-c45-sku-64841000/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x 1000mm long steel C45 SKU: 64840900](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-1000mm-long-steel-c45-sku-64840900/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x 1000mm long steel C45 SKU: 64840800](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-1000mm-long-steel-c45-sku-64840800/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x 1000mm long steel C45 SKU: 64840700](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-1000mm-long-steel-c45-sku-64840700/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x 1000mm long steel C45 SKU: 64840600](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-1000mm-long-steel-c45-sku-64840600/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x 1000mm long steel C45 SKU: 64840500](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-1000mm-long-steel-c45-sku-64840500/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x 1000mm long steel C45 SKU: 64840400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-1000mm-long-steel-c45-sku-64840400/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x 1000mm long steel C45 SKU: 64840300](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-1000mm-long-steel-c45-sku-64840300/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11x14 x 1000mm long steel C45 SKU: 64840200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-1000mm-long-steel-c45-sku-64840200/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x 1000mm long steel C45 SKU: 64840100](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-1000mm-long-steel-c45-sku-64840100/): Material: Steel C45, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Mounting hub with profile DIN 5480 38 x 1,25 x 29 length 45mm flange diameter 96mm material C45 SKU: 64823810](https://maedler.in/product/mounting-hub-with-profile-din-5480-38-x-125-x-29-length-45mm-flange-diameter-96mm-material-c45-sku-64823810/): Material: Steel C45. Hub with flange, for toothed shafts profile DIN 5480. As connecting element for torque transmission and centring. Easy sliding fit with our toothed shafts profile DIN 5480. The positon of the bore holes does not refer to the toothing. Module 1.25. Pressure angle 30°. Tolerance field 9H. - [splined hub DIN 5480 38 x 1,25 x 29 length 40mm material 16MnCr5 SKU: 64823800](https://maedler.in/product/splined-hub-din-5480-38-x-125-x-29-length-40mm-material-16mncr5-sku-64823800/): Material: Steel 16MnCr5. Sleeves for toothed shafts with profile DIN 5480. For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding shafts DIN 5480. Module 1.25. Pressure angle 30°. Tolerance 9H. - [Mounting hub with profile DIN 5480 25 x 1,25 x 18 length 45mm flange diameter 96mm material C45 SKU: 64822510](https://maedler.in/product/mounting-hub-with-profile-din-5480-25-x-125-x-18-length-45mm-flange-diameter-96mm-material-c45-sku-64822510/): Material: Steel C45. Hub with flange, for toothed shafts profile DIN 5480. As connecting element for torque transmission and centring. Easy sliding fit with our toothed shafts profile DIN 5480. The positon of the bore holes does not refer to the toothing. Module 1.25. Pressure angle 30°. Tolerance field 9H. - [splined hub DIN 5480 25 x 1,25 x 18 length 40mm material 16MnCr5 SKU: 64822500](https://maedler.in/product/splined-hub-din-5480-25-x-125-x-18-length-40mm-material-16mncr5-sku-64822500/): Material: Steel 16MnCr5. Sleeves for toothed shafts with profile DIN 5480. For shaft-to-hub connection, for torque transmission and centering. Sliding fit with our corresponding shafts DIN 5480. Module 1.25. Pressure angle 30°. Tolerance 9H. - [Mounting hub with profile DIN 5480 20 x 1,25 x 14 length 4mm flange diameter 76mm material C45 SKU: 64822010](https://maedler.in/product/mounting-hub-with-profile-din-5480-20-x-125-x-14-length-4mm-flange-diameter-76mm-material-c45-sku-64822010/): Material: Steel C45. Hub with flange, for toothed shafts profile DIN 5480. As connecting element for torque transmission and centring. Easy sliding fit with our toothed shafts profile DIN 5480. The positon of the bore holes does not refer to the toothing. Module 1.25. Pressure angle 30°. Tolerance field 9H. - [Bevel gearbox KU/I, type K, size 0 type 10 gear ratio 2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200102](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-10-gear-ratio-21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I, type K, size 0, type 10 gear ratio 1,5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200101](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-10-gear-ratio-151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I, type K, size 0, type 10 gear ratio 1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200100](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-10-gear-ratio-11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox DZR size 4 version B i=2:1 housing and shafts stainless steel SKU: 41092602](https://maedler.in/product/bevel-gearbox-dzr-size-4-version-b-i21-housing-and-shafts-stainless-steel-sku-41092602/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 4 version B i=1:1 housing and shafts stainless steel SKU: 41092600](https://maedler.in/product/bevel-gearbox-dzr-size-4-version-b-i11-housing-and-shafts-stainless-steel-sku-41092600/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 3 version B i=2:1 housing and shafts stainless steel SKU: 41092402](https://maedler.in/product/bevel-gearbox-dzr-size-3-version-b-i21-housing-and-shafts-stainless-steel-sku-41092402/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 3 version B i=1:1 housing and shafts stainless steel SKU: 41092400](https://maedler.in/product/bevel-gearbox-dzr-size-3-version-b-i11-housing-and-shafts-stainless-steel-sku-41092400/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 2 version B i=2:1 housing and shafts stainless steel SKU: 41092202](https://maedler.in/product/bevel-gearbox-dzr-size-2-version-b-i21-housing-and-shafts-stainless-steel-sku-41092202/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 2 version B i=1:1 housing and shafts stainless steel SKU: 41092200](https://maedler.in/product/bevel-gearbox-dzr-size-2-version-b-i11-housing-and-shafts-stainless-steel-sku-41092200/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 1 version B i=2:1 housing and shafts stainless steel SKU: 41092002](https://maedler.in/product/bevel-gearbox-dzr-size-1-version-b-i21-housing-and-shafts-stainless-steel-sku-41092002/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 1 version B i=1:1 housing and shafts stainless steel SKU: 41092000](https://maedler.in/product/bevel-gearbox-dzr-size-1-version-b-i11-housing-and-shafts-stainless-steel-sku-41092000/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 4 version A i=2:1 housing and shafts stainless steel SKU: 41091602](https://maedler.in/product/bevel-gearbox-dzr-size-4-version-a-i21-housing-and-shafts-stainless-steel-sku-41091602/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 4 version A i=1:1 housing and shafts stainless steel SKU: 41091600](https://maedler.in/product/bevel-gearbox-dzr-size-4-version-a-i11-housing-and-shafts-stainless-steel-sku-41091600/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 3 version A i=2:1 housing and shafts stainless steel SKU: 41091402](https://maedler.in/product/bevel-gearbox-dzr-size-3-version-a-i21-housing-and-shafts-stainless-steel-sku-41091402/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 3 version A i=1:1 housing and shafts stainless steel SKU: 41091400](https://maedler.in/product/bevel-gearbox-dzr-size-3-version-a-i11-housing-and-shafts-stainless-steel-sku-41091400/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 2 version A i=2:1 housing and shafts stainless steel SKU: 41091202](https://maedler.in/product/bevel-gearbox-dzr-size-2-version-a-i21-housing-and-shafts-stainless-steel-sku-41091202/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 2 version A i=1:1 housing and shafts stainless steel SKU: 41091200](https://maedler.in/product/bevel-gearbox-dzr-size-2-version-a-i11-housing-and-shafts-stainless-steel-sku-41091200/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 1 version A i=2:1 housing and shafts stainless steel SKU: 41091002](https://maedler.in/product/bevel-gearbox-dzr-size-1-version-a-i21-housing-and-shafts-stainless-steel-sku-41091002/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZR size 1 version A i=1:1 housing and shafts stainless steel SKU: 41091000](https://maedler.in/product/bevel-gearbox-dzr-size-1-version-a-i11-housing-and-shafts-stainless-steel-sku-41091000/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible.Input shaft / output shaft, speed:At both types and both ratios, the input can be at shaft A as well as at shaft B.At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up.Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm).Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm).Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.Gearing: Spiral teeth, hardened.Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings.From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150.Gearboxes are maintenance free.Angular backlash: 15 to 30 angular minutes.Permiss. operating temperature: -18°C to +80°C.* Permiss. radial force for FA=0.** Permiss. axial force for FR=0. - [Bevel gearbox DZA, type H, size 3, i=3:1 SKU: 41013403](https://maedler.in/product/bevel-gearbox-dza-type-h-size-3-i31-sku-41013403/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 3, i=2:1 SKU: 41013402](https://maedler.in/product/bevel-gearbox-dza-type-h-size-3-i21-sku-41013402/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 3, i=1:1 SKU: 41013400](https://maedler.in/product/bevel-gearbox-dza-type-h-size-3-i11-sku-41013400/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 2, i=3:1 SKU: 41013203](https://maedler.in/product/bevel-gearbox-dza-type-h-size-2-i31-sku-41013203/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 2, i=2:1 SKU: 41013202](https://maedler.in/product/bevel-gearbox-dza-type-h-size-2-i21-sku-41013202/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, type H, size 2, i=1:1 SKU: 41013200](https://maedler.in/product/bevel-gearbox-dza-type-h-size-2-i11-sku-41013200/): General data: Gearbox with hollow shaft on the output side. Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible. The maximum input speed (hollow shaft as input device) for gearing up is 750 rpm. Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. - [Bevel gearbox DZA, size 4, type B, i=2:1 SKU: 41002602](https://maedler.in/product/bevel-gearbox-dza-size-4-type-b-i21-sku-41002602/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 4, type B, i=1:1 SKU: 41002600](https://maedler.in/product/bevel-gearbox-dza-size-4-type-b-i11-sku-41002600/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 3, type B, i=2:1 SKU: 41002402](https://maedler.in/product/bevel-gearbox-dza-size-3-type-b-i21-sku-41002402/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 3, type B, i=1:1 SKU: 41002400](https://maedler.in/product/bevel-gearbox-dza-size-3-type-b-i11-sku-41002400/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 2, type B, i=2:1 SKU: 41002202](https://maedler.in/product/bevel-gearbox-dza-size-2-type-b-i21-sku-41002202/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 2, type B, i=1:1 SKU: 41002200](https://maedler.in/product/bevel-gearbox-dza-size-2-type-b-i11-sku-41002200/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 1, type B, i=2:1 SKU: 41002002](https://maedler.in/product/bevel-gearbox-dza-size-1-type-b-i21-sku-41002002/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 1, type B, i=1:1 SKU: 41002000](https://maedler.in/product/bevel-gearbox-dza-size-1-type-b-i11-sku-41002000/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B/C. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B/C with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 4, type A, i=2:1 SKU: 41001602](https://maedler.in/product/bevel-gearbox-dza-size-4-type-a-i21-sku-41001602/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 4, type A, i=1:1 SKU: 41001600](https://maedler.in/product/bevel-gearbox-dza-size-4-type-a-i11-sku-41001600/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 3, type A, i=2:1 SKU: 41001402](https://maedler.in/product/bevel-gearbox-dza-size-3-type-a-i21-sku-41001402/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 3, type A, i=1:1 SKU: 41001400](https://maedler.in/product/bevel-gearbox-dza-size-3-type-a-i11-sku-41001400/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 2, type A, i=2:1 SKU: 41001202](https://maedler.in/product/bevel-gearbox-dza-size-2-type-a-i21-sku-41001202/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 2, type A, i=1:1 SKU: 41001200](https://maedler.in/product/bevel-gearbox-dza-size-2-type-a-i11-sku-41001200/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 1, type A, i=2:1 SKU: 41001002](https://maedler.in/product/bevel-gearbox-dza-size-1-type-a-i21-sku-41001002/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Bevel gearbox DZA, size 1, type A, i=1:1 SKU: 41001000](https://maedler.in/product/bevel-gearbox-dza-size-1-type-a-i11-sku-41001000/): General data: 4 sizes. Ratio either 1 : 1 or 2 : 1. Any mounting position possible. Input shaft / output shaft, speed: At both types and both ratios, the input can be at shaft A as well as at shaft B. At ratio 1:1 the maximum speed is 1400 rpm. Ratio 2:1 can be used for gearing down and also for gearing up. Gearing down: Input at shaft A with max. speed 1400 rpm (output speed max. 700 rpm). Gearing up: Input at shaft B with max. speed 750 rpm (output speed max. 1500 rpm). Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof. Gearing: Spiral teeth, hardened. Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free. Angular backlash: 15 to 30 angular minutes. Permiss. operating temperature: -18°C to +80°C. * Permiss. radial force for FA=0. ** Permiss. axial force for FR=0. - [Reducing bush MPL size 90 bore 24mm outer diameter 28mm length 20mm slotted SKU: 40569024](https://maedler.in/product/reducing-bush-mpl-size-90-bore-24mm-outer-diameter-28mm-length-20mm-slotted-sku-40569024/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 90 bore 19mm outer diameter 28mm length 20mm slotted SKU: 40569019](https://maedler.in/product/reducing-bush-mpl-size-90-bore-19mm-outer-diameter-28mm-length-20mm-slotted-sku-40569019/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 90 bore 16mm outer diameter 28mm length 20mm slotted SKU: 40569016](https://maedler.in/product/reducing-bush-mpl-size-90-bore-16mm-outer-diameter-28mm-length-20mm-slotted-sku-40569016/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 90 bore 14mm outer diameter 28mm length 20mm slotted SKU: 40569014](https://maedler.in/product/reducing-bush-mpl-size-90-bore-14mm-outer-diameter-28mm-length-20mm-slotted-sku-40569014/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 90 bore 11mm outer diameter 28mm length 20mm slotted SKU: 40569011](https://maedler.in/product/reducing-bush-mpl-size-90-bore-11mm-outer-diameter-28mm-length-20mm-slotted-sku-40569011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 16mm outer diameter 19mm length 13.5mm slotted SKU: 40567016](https://maedler.in/product/reducing-bush-mpl-size-70-bore-16mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567016/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 14mm outer diameter 19mm length 13.5mm slotted SKU: 40567014](https://maedler.in/product/reducing-bush-mpl-size-70-bore-14mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567014/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 11mm outer diameter 19mm length 13.5mm slotted SKU: 40567011](https://maedler.in/product/reducing-bush-mpl-size-70-bore-11mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 10mm outer diameter 19mm length 13.5mm slotted SKU: 40567010](https://maedler.in/product/reducing-bush-mpl-size-70-bore-10mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567010/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 70 bore 9mm outer diameter 19mm length 13.5mm slotted SKU: 40567009](https://maedler.in/product/reducing-bush-mpl-size-70-bore-9mm-outer-diameter-19mm-length-13-5mm-slotted-sku-40567009/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 14mm outer diameter 18mm length 9mm slotted SKU: 40565014](https://maedler.in/product/reducing-bush-mpl-size-50-bore-14mm-outer-diameter-18mm-length-9mm-slotted-sku-40565014/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 12mm outer diameter 18mm length 9mm slotted SKU: 40565012](https://maedler.in/product/reducing-bush-mpl-size-50-bore-12mm-outer-diameter-18mm-length-9mm-slotted-sku-40565012/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 11mm outer diameter 18mm length 9mm slotted SKU: 40565011](https://maedler.in/product/reducing-bush-mpl-size-50-bore-11mm-outer-diameter-18mm-length-9mm-slotted-sku-40565011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 9mm outer diameter 18mm length 9mm slotted SKU: 40565009](https://maedler.in/product/reducing-bush-mpl-size-50-bore-9mm-outer-diameter-18mm-length-9mm-slotted-sku-40565009/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPL size 50 bore 8mm outer diameter 18mm length 9mm slotted SKU: 40565008](https://maedler.in/product/reducing-bush-mpl-size-50-bore-8mm-outer-diameter-18mm-length-9mm-slotted-sku-40565008/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 80 bore 14mm outer diameter 19mm length 25mm slotted SKU: 40558014](https://maedler.in/product/reducing-bush-mps-size-80-bore-14mm-outer-diameter-19mm-length-25mm-slotted-sku-40558014/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 80 bore 11mm outer diameter 19mm length 25mm slotted SKU: 40558011](https://maedler.in/product/reducing-bush-mps-size-80-bore-11mm-outer-diameter-19mm-length-25mm-slotted-sku-40558011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 60 bore 11mm outer diameter 14mm length 20mm slotted SKU: 40556011](https://maedler.in/product/reducing-bush-mps-size-60-bore-11mm-outer-diameter-14mm-length-20mm-slotted-sku-40556011/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 60 bore 9mm outer diameter 14mm length 20mm slotted SKU: 40556009](https://maedler.in/product/reducing-bush-mps-size-60-bore-9mm-outer-diameter-14mm-length-20mm-slotted-sku-40556009/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Reducing bush MPS size 40 bore 6mm outer diameter 9mm length 17mm slotted SKU: 40554006](https://maedler.in/product/reducing-bush-mps-size-40-bore-6mm-outer-diameter-9mm-length-17mm-slotted-sku-40554006/): Reducing bushes for adapting motor shafts with different dimensions to the standard bore.When using the reducing bushings, you must observe the position of the bushing when mounting:The slot of the reducing sleeve must be mounted offset to the clamping screw / grub screw. Depending on the type and size, the bushings are slotted 1-fold, 2-fold or 4-fold. To avoid distortion, please refer to the assembly instructions at www.maedler.de. - [Motor adaption MPL size 90 outer dim. 100 x 100 x 27mm mounting hole circle-Ø 115mm M8 centering-Ø 95mm SKU: 40549095](https://maedler.in/product/motor-adaption-mpl-size-90-outer-dim-100-x-100-x-27mm-mounting-hole-circle-o-115mm-m8-centering-o-95mm-sku-40549095/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 90 outer dim. 90 x 90 x 27mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40549080](https://maedler.in/product/motor-adaption-mpl-size-90-outer-dim-90-x-90-x-27mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40549080/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 90 outer dim. 90 x 90 x 27mm mounting hole circle-Ø 90mm M6 centering-Ø 70mm SKU: 40549070](https://maedler.in/product/motor-adaption-mpl-size-90-outer-dim-90-x-90-x-27mm-mounting-hole-circle-o-90mm-m6-centering-o-70mm-sku-40549070/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 90 outer-Ø 93 x 21mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40549060](https://maedler.in/product/motor-adaption-mpl-size-90-outer-o-93-x-21mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40549060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 70 outer dim. 90 x 90 x 21.5 mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40547080](https://maedler.in/product/motor-adaption-mpl-size-70-outer-dim-90-x-90-x-21-5-mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40547080/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 70 outer dim. 80 x 80 x 31.5mm mounting hole circle-Ø 90mm M6 centering-Ø 70mm SKU: 40547070](https://maedler.in/product/motor-adaption-mpl-size-70-outer-dim-80-x-80-x-31-5mm-mounting-hole-circle-o-90mm-m6-centering-o-70mm-sku-40547070/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 70 outer dim. 70 x 70 x 21.5mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40547060](https://maedler.in/product/motor-adaption-mpl-size-70-outer-dim-70-x-70-x-21-5mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40547060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 70 outer-Ø 73 x 17,5mm mounting hole circle-Ø 63mm M5 centering-Ø 40mm SKU: 40547040](https://maedler.in/product/motor-adaption-mpl-size-70-outer-o-73-x-175mm-mounting-hole-circle-o-63mm-m5-centering-o-40mm-sku-40547040/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 50 outer dim. 70 x 70 x 27mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40545060](https://maedler.in/product/motor-adaption-mpl-size-50-outer-dim-70-x-70-x-27mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40545060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPL size 50 outer dim. 55 x 55 x 17mm mounting hole circle-Ø 63mm M5 centering-Ø 40mm SKU: 40545040](https://maedler.in/product/motor-adaption-mpl-size-50-outer-dim-55-x-55-x-17mm-mounting-hole-circle-o-63mm-m5-centering-o-40mm-sku-40545040/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request.* With the product no. 405 470 40 and 405 490 60, the motor adaptation is round.** With the product no. 405 470 80 the threadhole is a through-hole. - [Motor adaption MPS size 80 outer dim. 90 x 90 x 33mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40538180](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-90-x-90-x-33mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40538180/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 80 outer dim. 100 x 100 x 33mm mounting hole circle-Ø 115mm M8 centering-Ø 95mm SKU: 40538095](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-100-x-100-x-33mm-mounting-hole-circle-o-115mm-m8-centering-o-95mm-sku-40538095/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 80 outer dim. 90 x 90 x 23mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40538080](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-90-x-90-x-23mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40538080/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 80 outer dim. 80 x 80 x 33mm mounting hole circle-Ø 90mm M6 centering-Ø 70mm SKU: 40538070](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-80-x-80-x-33mm-mounting-hole-circle-o-90mm-m6-centering-o-70mm-sku-40538070/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 80 outer dim. 80 x 80 x 23mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40538060](https://maedler.in/product/motor-adaption-mps-size-80-outer-dim-80-x-80-x-23mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40538060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 60 outer dim. 90 x 90 x 27mm mounting hole circle-Ø 100mm M6 centering-Ø 80mm SKU: 40536080](https://maedler.in/product/motor-adaption-mps-size-60-outer-dim-90-x-90-x-27mm-mounting-hole-circle-o-100mm-m6-centering-o-80mm-sku-40536080/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 60 outer dim. 80 x 80 x 37mm mounting hole circle-Ø 90mm M6 centering-Ø 70mm SKU: 40536070](https://maedler.in/product/motor-adaption-mps-size-60-outer-dim-80-x-80-x-37mm-mounting-hole-circle-o-90mm-m6-centering-o-70mm-sku-40536070/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 60 outer dim. 70 x 70 x 27mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40536060](https://maedler.in/product/motor-adaption-mps-size-60-outer-dim-70-x-70-x-27mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40536060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 60 outer dim. 60 x 60 x 20mm mounting hole circle-Ø 63mm M5 centering-Ø 40mm SKU: 40536040](https://maedler.in/product/motor-adaption-mps-size-60-outer-dim-60-x-60-x-20mm-mounting-hole-circle-o-63mm-m5-centering-o-40mm-sku-40536040/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 40 outer dim. 70 x 70 x 25mm mounting hole circle-Ø 75mm M5 centering-Ø 60mm SKU: 40534060](https://maedler.in/product/motor-adaption-mps-size-40-outer-dim-70-x-70-x-25mm-mounting-hole-circle-o-75mm-m5-centering-o-60mm-sku-40534060/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Motor adaption MPS size 40 outer dim. 55 x 55 x 18mm mounting hole circle-Ø 63mm M5 centering-Ø 40mm SKU: 40534040](https://maedler.in/product/motor-adaption-mps-size-40-outer-dim-55-x-55-x-18mm-mounting-hole-circle-o-63mm-m5-centering-o-40mm-sku-40534040/): The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other flange versions, such as design B14 (2-piece) and also for IEC motors, are available on request. - [Planetary gearbox MPL size 90 ratio i=100 2-stage SKU: 40529100](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i100-2-stage-sku-40529100/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=70 2-stage SKU: 40529070](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i70-2-stage-sku-40529070/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=50 2-stage SKU: 40529050](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i50-2-stage-sku-40529050/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=35 2-stage SKU: 40529035](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i35-2-stage-sku-40529035/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=30 2-stage SKU: 40529030](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i30-2-stage-sku-40529030/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=25 2-stage SKU: 40529025](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i25-2-stage-sku-40529025/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=15 2-stage SKU: 40529015](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i15-2-stage-sku-40529015/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=10 1-stage SKU: 40529010](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i10-1-stage-sku-40529010/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=7 1-stage SKU: 40529007](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i7-1-stage-sku-40529007/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=5 1-stage SKU: 40529005](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i5-1-stage-sku-40529005/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 90 ratio i=3 1-stage SKU: 40529003](https://maedler.in/product/planetary-gearbox-mpl-size-90-ratio-i3-1-stage-sku-40529003/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=100 2-stage SKU: 40527100](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i100-2-stage-sku-40527100/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=70 2-stage SKU: 40527070](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i70-2-stage-sku-40527070/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=50 2-stage SKU: 40527050](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i50-2-stage-sku-40527050/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=35 2-stage SKU: 40527035](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i35-2-stage-sku-40527035/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=30 2-stage SKU: 40527030](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i30-2-stage-sku-40527030/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=25 2-stage SKU: 40527025](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i25-2-stage-sku-40527025/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Planetary gearbox MPL size 70 ratio i=15 2-stage SKU: 40527015](https://maedler.in/product/planetary-gearbox-mpl-size-70-ratio-i15-2-stage-sku-40527015/): The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm.• Lubrication: Fluid grease, lubricated for life.• Any mounting position possible.• Temperature range: -25 °C to +90 °C.The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used.Motor adaption and reducing bush have to be ordered separately.1) Lifetime 20,000 h at output speed 100 min -1.2) max. 1,000 Cycles per hr. Ta max.- Share <5% of total running time.3) max. 1,000 cycles during the gearbox service life.4) elated to the drive shaft. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 zinc plated M24 x 3 x 1000mm RH marked with colour white SKU: 65022400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-zinc-plated-m24-x-3-x-1000mm-rh-marked-with-colour-white-sku-65022400/): Material: Steel, strength 10.9, zinc-plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 zinc plated M20 x 2,5 x 1000mm RH marked with colour white SKU: 65022000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-zinc-plated-m20-x-25-x-1000mm-rh-marked-with-colour-white-sku-65022000/): Material: Steel, strength 10.9, zinc-plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 zinc plated M16 x 2 x 1000mm RH marked with colour white SKU: 65021600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-zinc-plated-m16-x-2-x-1000mm-rh-marked-with-colour-white-sku-65021600/): Material: Steel, strength 10.9, zinc-plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 zinc plated M12 x 1,75 x 1000mm RH marked with colour white SKU: 65021200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-zinc-plated-m12-x-175-x-1000mm-rh-marked-with-colour-white-sku-65021200/): Material: Steel, strength 10.9, zinc-plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 zinc plated M10 x 1,5 x 1000mm RH marked with colour white SKU: 65021000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-zinc-plated-m10-x-15-x-1000mm-rh-marked-with-colour-white-sku-65021000/): Material: Steel, strength 10.9, zinc-plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 zinc plated M8 x 1,25 x 1000mm RH marked with colour white SKU: 65020800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-zinc-plated-m8-x-125-x-1000mm-rh-marked-with-colour-white-sku-65020800/): Material: Steel, strength 10.9, zinc-plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 plain surface M36 x 4 x 1000mm RH marked with colour white SKU: 65013600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-plain-surface-m36-x-4-x-1000mm-rh-marked-with-colour-white-sku-65013600/): Material: Steel, strength 10.9. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 plain surface M30 x 3,5 x 1000mm RH marked with colour white SKU: 65013000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-plain-surface-m30-x-35-x-1000mm-rh-marked-with-colour-white-sku-65013000/): Material: Steel, strength 10.9. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 plain surface M24 x 3 x 1000mm RH marked with colour white SKU: 65012400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-plain-surface-m24-x-3-x-1000mm-rh-marked-with-colour-white-sku-65012400/): Material: Steel, strength 10.9. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 plain surface M20 x 2,5 x 1000mm RH marked with colour white SKU: 65012000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-plain-surface-m20-x-25-x-1000mm-rh-marked-with-colour-white-sku-65012000/): Material: Steel, strength 10.9. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 plain surface M16 x 2 x 1000mm RH marked with colour white SKU: 65011600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-plain-surface-m16-x-2-x-1000mm-rh-marked-with-colour-white-sku-65011600/): Material: Steel, strength 10.9. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 plain surface M12 x 1,75 x 1000mm RH marked with colour white SKU: 65011200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-plain-surface-m12-x-175-x-1000mm-rh-marked-with-colour-white-sku-65011200/): Material: Steel, strength 10.9. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 plain surface M10 x 1,5 x 1000mm RH marked with colour white SKU: 65011000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-plain-surface-m10-x-15-x-1000mm-rh-marked-with-colour-white-sku-65011000/): Material: Steel, strength 10.9. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 plain surface M8 x 1,25 x 1000mm RH marked with colour white SKU: 65010800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-plain-surface-m8-x-125-x-1000mm-rh-marked-with-colour-white-sku-65010800/): Material: Steel, strength 10.9. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 plain surface M6 x 1 x 1000mm RH marked with colour white SKU: 65010600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-plain-surface-m6-x-1-x-1000mm-rh-marked-with-colour-white-sku-65010600/): Material: Steel, strength 10.9. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M36 x 4 x 1000mm RH SKU: 65003600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m36-x-4-x-1000mm-rh-sku-65003600/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M30 x 3,5 x 1000mm RH SKU: 65003000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m30-x-35-x-1000mm-rh-sku-65003000/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M24 x 3 x 1000mm RH SKU: 65002400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m24-x-3-x-1000mm-rh-sku-65002400/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M20 x 2,5 x 1000mm RH SKU: 65002000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m20-x-25-x-1000mm-rh-sku-65002000/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M16 x 2 x 1000mm RH SKU: 65001600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m16-x-2-x-1000mm-rh-sku-65001600/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M12 x 1,75 x 1000mm RH SKU: 65001200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m12-x-175-x-1000mm-rh-sku-65001200/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M10 x 1,5 x 1000mm RH SKU: 65001000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m10-x-15-x-1000mm-rh-sku-65001000/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M8 x 1,25 x 1000mm RH SKU: 65000800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m8-x-125-x-1000mm-rh-sku-65000800/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M6 x 1 x 1000mm RH SKU: 65000600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m6-x-1-x-1000mm-rh-sku-65000600/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M5 x 0,8 x 1000mm RH SKU: 65000500](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m5-x-08-x-1000mm-rh-sku-65000500/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M4 x 0,7 x 1000mm RH SKU: 65000400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m4-x-07-x-1000mm-rh-sku-65000400/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M3 x 0,5 x 1000mm RH SKU: 65000300](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m3-x-05-x-1000mm-rh-sku-65000300/): Material: Steel, strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed thread. - [Splined shaft similar to DIN 14 profile KW 46x54 x 3000mm long stainless steel 1.4301 SKU: 64899484](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-3000mm-long-stainless-steel-1-4301-sku-64899484/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x 3000mm long stainless steel 1.4301 SKU: 64899482](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-3000mm-long-stainless-steel-1-4301-sku-64899482/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x 3000mm long stainless steel 1.4301 SKU: 64899480](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-3000mm-long-stainless-steel-1-4301-sku-64899480/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x 3000mm long stainless steel 1.4301 SKU: 64899479](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-3000mm-long-stainless-steel-1-4301-sku-64899479/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x 3000mm long stainless steel 1.4301 SKU: 64899478](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-3000mm-long-stainless-steel-1-4301-sku-64899478/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x 3000mm long stainless steel 1.4301 SKU: 64899477](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-3000mm-long-stainless-steel-1-4301-sku-64899477/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x 3000mm long stainless steel 1.4301 SKU: 64899476](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-3000mm-long-stainless-steel-1-4301-sku-64899476/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x 3000mm long stainless steel 1.4301 SKU: 64899475](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-3000mm-long-stainless-steel-1-4301-sku-64899475/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x 3000mm long stainless steel 1.4301 SKU: 64899474](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-3000mm-long-stainless-steel-1-4301-sku-64899474/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x 3000mm long stainless steel 1.4301 SKU: 64899473](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-3000mm-long-stainless-steel-1-4301-sku-64899473/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11X14 x 3000mm long stainless steel 1.4301 SKU: 64899472](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-3000mm-long-stainless-steel-1-4301-sku-64899472/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x 3000mm long stainless steel 1.4301 SKU: 64899471](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-3000mm-long-stainless-steel-1-4301-sku-64899471/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 2000mm long stainless steel 1.4301 SKU: 64899464](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-2000mm-long-stainless-steel-1-4301-sku-64899464/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x 2000mm long stainless steel 1.4301 SKU: 64899462](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-2000mm-long-stainless-steel-1-4301-sku-64899462/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x 2000mm long stainless steel 1.4301 SKU: 64899460](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-2000mm-long-stainless-steel-1-4301-sku-64899460/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x 2000mm long stainless steel 1.4301 SKU: 64899459](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-2000mm-long-stainless-steel-1-4301-sku-64899459/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x 2000mm long stainless steel 1.4301 SKU: 64899458](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-2000mm-long-stainless-steel-1-4301-sku-64899458/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x 2000mm long stainless steel 1.4301 SKU: 64899457](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-2000mm-long-stainless-steel-1-4301-sku-64899457/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x 2000mm long stainless steel 1.4301 SKU: 64899456](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-2000mm-long-stainless-steel-1-4301-sku-64899456/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x 2000mm long stainless steel 1.4301 SKU: 64899455](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-2000mm-long-stainless-steel-1-4301-sku-64899455/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x 2000mm long stainless steel 1.4301 SKU: 64899454](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-2000mm-long-stainless-steel-1-4301-sku-64899454/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x 2000mm long stainless steel 1.4301 SKU: 64899453](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-2000mm-long-stainless-steel-1-4301-sku-64899453/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11x14 x 2000mm long stainless steel 1.4301 SKU: 64899452](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-2000mm-long-stainless-steel-1-4301-sku-64899452/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x 2000mm long stainless steel 1.4301 SKU: 64899451](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-2000mm-long-stainless-steel-1-4301-sku-64899451/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 1500mm long stainless steel 1.4301 SKU: 64899444](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-1500mm-long-stainless-steel-1-4301-sku-64899444/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x 1500mm long stainless steel 1.4301 SKU: 64899442](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-1500mm-long-stainless-steel-1-4301-sku-64899442/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x 1500mm long stainless steel 1.4301 SKU: 64899440](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-1500mm-long-stainless-steel-1-4301-sku-64899440/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x 1500mm long stainless steel 1.4301 SKU: 64899439](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-1500mm-long-stainless-steel-1-4301-sku-64899439/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x 1500mm long stainless steel 1.4301 SKU: 64899438](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-1500mm-long-stainless-steel-1-4301-sku-64899438/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x 1500mm long stainless steel 1.4301 SKU: 64899437](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-1500mm-long-stainless-steel-1-4301-sku-64899437/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x 1500mm long stainless steel 1.4301 SKU: 64899436](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-1500mm-long-stainless-steel-1-4301-sku-64899436/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x 1500mm long stainless steel 1.4301 SKU: 64899435](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-1500mm-long-stainless-steel-1-4301-sku-64899435/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x 1500mm long stainless steel 1.4301 SKU: 64899434](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-1500mm-long-stainless-steel-1-4301-sku-64899434/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x 1500mm long stainless steel 1.4301 SKU: 64899433](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-1500mm-long-stainless-steel-1-4301-sku-64899433/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11X14 x 1500mm long stainless steel 1.4301 SKU: 64899432](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-1500mm-long-stainless-steel-1-4301-sku-64899432/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x 1500mm long stainless steel 1.4301 SKU: 64899431](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-1500mm-long-stainless-steel-1-4301-sku-64899431/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 1000mm long stainless steel 1.4301 SKU: 64899414](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-1000mm-long-stainless-steel-1-4301-sku-64899414/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x 1000mm long stainless steel 1.4301 SKU: 64899412](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-1000mm-long-stainless-steel-1-4301-sku-64899412/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x 1000mm long stainless steel 1.4301 SKU: 64899410](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-1000mm-long-stainless-steel-1-4301-sku-64899410/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x 1000mm long stainless steel 1.4301 SKU: 64899409](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-1000mm-long-stainless-steel-1-4301-sku-64899409/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x 1000mm long stainless steel 1.4301 SKU: 64899408](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-1000mm-long-stainless-steel-1-4301-sku-64899408/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x 1000mm long stainless steel 1.4301 SKU: 64899407](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-1000mm-long-stainless-steel-1-4301-sku-64899407/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x 1000mm long stainless steel 1.4301 SKU: 64899406](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-1000mm-long-stainless-steel-1-4301-sku-64899406/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x 1000mm long stainless steel 1.4301 SKU: 64899405](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-1000mm-long-stainless-steel-1-4301-sku-64899405/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x 1000mm long stainless steel 1.4301 SKU: 64899404](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-1000mm-long-stainless-steel-1-4301-sku-64899404/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x 1000mm long stainless steel 1.4301 SKU: 64899403](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-1000mm-long-stainless-steel-1-4301-sku-64899403/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 11X14 x 1000mm long stainless steel 1.4301 SKU: 64899402](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-1000mm-long-stainless-steel-1-4301-sku-64899402/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x 1000mm long stainless steel 1.4301 SKU: 64899401](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-1000mm-long-stainless-steel-1-4301-sku-64899401/): Material: Stainless steel 1.4301 (AISI 304), cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x approx. 6000mm long stainless steel 1.4301 SKU: 64899084](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899084/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 36X42 x approx. 6000mm long stainless steel 1.4301 SKU: 64899082](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899082/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 42X48 x approx. 6000mm long stainless steel 1.4301 SKU: 64899080](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899080/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 28X34 x approx. 6000mm long stainless steel 1.4301 SKU: 64899079](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899079/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 32X38 x approx. 6000mm long stainless steel 1.4301 SKU: 64899078](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899078/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 26X32 x approx. 6000mm long stainless steel 1.4301 SKU: 64899077](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899077/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 21X25 x approx. 6000mm long stainless steel 1.4301 SKU: 64899076](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899076/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 16X20 x approx. 6000mm long stainless steel 1.4301 SKU: 64899075](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-16x20-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899075/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 13X16 x approx. 6000mm long stainless steel 1.4301 SKU: 64899074](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-13x16-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899074/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 23X28 x approx. 6000mm long stainless steel 1.4301 SKU: 64899073](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-23x28-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899073/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 11X14 x approx. 6000mm long stainless steel 1.4301 SKU: 64899072](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-11x14-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899072/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 18X22 x approx. 6000mm long stainless steel 1.4301 SKU: 64899071](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-18x22-x-approx-6000mm-long-stainless-steel-1-4301-sku-64899071/): Material: Stainless steel 1.4301 (AISI 304), cold drawn.Lengths in the table: 6 meters. (mostly in stock).Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 6000mm long steel 42CrMo4 SKU: 64888401](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-6000mm-long-steel-42crmo4-sku-64888401/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 46x54 x 3000mm long steel 42CrMo4 SKU: 64888400](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-46x54-x-3000mm-long-steel-42crmo4-sku-64888400/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 36x42 x 6000mm long steel 42CrMo4 SKU: 64888201](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-6000mm-long-steel-42crmo4-sku-64888201/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 36x42 x 3000mm long steel 42CrMo4 SKU: 64888200](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-36x42-x-3000mm-long-steel-42crmo4-sku-64888200/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 42x48 x 6000mm long steel 42CrMo4 SKU: 64888001](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-6000mm-long-steel-42crmo4-sku-64888001/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 42x48 x 3000mm long steel 42CrMo4 SKU: 64888000](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-42x48-x-3000mm-long-steel-42crmo4-sku-64888000/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 28x34 x 6000mm long steel 42CrMo4 SKU: 64887901](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-6000mm-long-steel-42crmo4-sku-64887901/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 28x34 x 3000mm long steel 42CrMo4 SKU: 64887900](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-28x34-x-3000mm-long-steel-42crmo4-sku-64887900/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 32x38 x 6000mm long steel 42CrMo4 SKU: 64887801](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-6000mm-long-steel-42crmo4-sku-64887801/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 32x38 x 3000mm long steel 42CrMo4 SKU: 64887800](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-32x38-x-3000mm-long-steel-42crmo4-sku-64887800/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 26x32 x 6000mm long steel 42CrMo4 SKU: 64887701](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-6000mm-long-steel-42crmo4-sku-64887701/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Splined shaft similar to DIN 14 profile KW 26x32 x 3000mm long steel 42CrMo4 SKU: 64887700](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-26x32-x-3000mm-long-steel-42crmo4-sku-64887700/): Material: Steel 42CrMo4, cold drawn. Lengths in stock: 1000, 1500, 2000 and 3000 mm. Special lengths up to 6000 mm on request (some in stock). Tolerances: Straightness 0.8 mm/m, torsion max. 0.5 mm/m. A straightness of 0.1 mm/m can be produced on request. - [Splined shaft similar to DIN 14 profile KW 21x25 x 6000mm long steel 42CrMo4 SKU: 64887601](https://maedler.in/product/splined-shaft-similar-to-din-14-profile-kw-21x25-x-6000mm-long-steel-42crmo4-sku-64887601/): Material: Steel 42CrMo4, cold drawn. Lengths in the table: 6 meters. (mostly in stock). Shorter lengths on request. - [Bevel gearbox KU/I model L size 2 version 60 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203805](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203805/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203804](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203804/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203803](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203803/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203802](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203802/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203801](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203801/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203800](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203800/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203706](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203706/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203705](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203705/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203704](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203704/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203703](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203703/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203702](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203702/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203701](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203701/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203700](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203700/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Miniature Bevel gearbox MKU, type H, size 035, type 80, gear ratio 1:1 SKU: 41203581](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-035-type-80-gear-ratio-11-sku-41203581/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 035, type 70, gear ratio 1:1 SKU: 41203571](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-035-type-70-gear-ratio-11-sku-41203571/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 035, type 60, gear ratio 1:1 SKU: 41203561](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-035-type-60-gear-ratio-11-sku-41203561/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 035, type 30, gear ratio 1:1 SKU: 41203531](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-035-type-30-gear-ratio-11-sku-41203531/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 035, type 20, gear ratio 1:1 SKU: 41203521](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-035-type-20-gear-ratio-11-sku-41203521/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 035, type 10, gear ratio 1:1 SKU: 41203511](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-035-type-10-gear-ratio-11-sku-41203511/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Bevel gearbox KU/I model L size 1 version 60 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203506](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203506/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203505](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203505/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203504](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203504/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203503](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203503/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203502](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203502/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203501](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203501/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203500](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203500/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203406](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203406/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203405](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203404](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203403](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203402](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203401](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 1 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203400](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-1-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203203](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203203/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203202](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203202/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203201](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203201/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203200](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203200/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203103](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203102](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203101](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 0 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203100](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-0-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model K size 30 version 20 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201405](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201404](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201403](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201402](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201401](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 20 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201400](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-20-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 30 version 10 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201305](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201305/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201304](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201304/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201303](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201303/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201302](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201302/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201301](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201301/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 30 version 10 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201300](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-30-version-10-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201300/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 25 version 20 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201106](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201106/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201105](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201105/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201104](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201104/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201103](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201102](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201101](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 20 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201100](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-20-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 25 version 10 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201006](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201006/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201005](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201005/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201004](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201004/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201003](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201003/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201002](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201002/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201001](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201001/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 25 version 10 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41201000](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-25-version-10-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41201000/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 2 version 20 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200806](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200806/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200805](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200805/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200804](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200804/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200803](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200803/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200802](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200802/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200801](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200801/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 20 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200800](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-20-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200800/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 2 version 10 i= 6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200706](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i-61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200706/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i= 5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200705](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200705/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i= 4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200704](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i-41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200704/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200703](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200703/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200702](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200702/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200701](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200701/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 2 version 10 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200700](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-2-version-10-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200700/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 1 version 20 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200506](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200506/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200505](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200505/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200504](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200504/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200503](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200503/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200502](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200502/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200501](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200501/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 20 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200500](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-20-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200500/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 1 version 10 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200406](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200406/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200405](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200404](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200403](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200402](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200401](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 1 version 10 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200400](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-1-version-10-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I model K size 0 version 20 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200203](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-0-version-20-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200203/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I model K size 0 version 20 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200202](https://maedler.in/product/bevel-gearbox-ku-i-model-k-size-0-version-20-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200202/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I, type K, size 0, type 20 gear ratio 1,5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200201](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-20-gear-ratio-151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200201/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Bevel gearbox KU/I, type K, size 0, type 20 gear ratio 1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200200](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-20-gear-ratio-11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200200/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Input on side A or side C. - [Bevel gearbox KU/I, type K, size 0, type 10 gear ratio 3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41200103](https://maedler.in/product/bevel-gearbox-ku-i-type-k-size-0-type-10-gear-ratio-31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41200103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M5 right handed SKU: 65200500](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m5-right-handed-sku-65200500/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M4 right handed SKU: 65200400](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m4-right-handed-sku-65200400/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M3 right handed SKU: 65200300](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m3-right-handed-sku-65200300/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M30 x 2 x 1000mm RH marked with colour yellow SKU: 65173000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m30-x-2-x-1000mm-rh-marked-with-colour-yellow-sku-65173000/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.With metric fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M24 x 1,5 x 1000mm RH marked with colour yellow SKU: 65172400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m24-x-15-x-1000mm-rh-marked-with-colour-yellow-sku-65172400/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.With metric fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M20 x 1,5 x 1000mm RH marked with colour yellow SKU: 65172000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m20-x-15-x-1000mm-rh-marked-with-colour-yellow-sku-65172000/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.With metric fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M16 x 1,5 x 1000mm RH marked with colour yellow SKU: 65171600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m16-x-15-x-1000mm-rh-marked-with-colour-yellow-sku-65171600/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.With metric fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M12 x 1,5 x 1000mm RH marked with colour yellow SKU: 65171200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m12-x-15-x-1000mm-rh-marked-with-colour-yellow-sku-65171200/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.With metric fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M10 x 1 x 1000mm RH marked with colour yellow SKU: 65171000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m10-x-1-x-1000mm-rh-marked-with-colour-yellow-sku-65171000/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.With metric fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M8 x 1 x 1000mm RH marked with colour yellow SKU: 65170800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m8-x-1-x-1000mm-rh-marked-with-colour-yellow-sku-65170800/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.With metric fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M36 x 4 x 1000mm LH marked with colour yellow SKU: 65133600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m36-x-4-x-1000mm-lh-marked-with-colour-yellow-sku-65133600/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M30 x 3,5 x 1000mm LH marked with colour yellow SKU: 65133000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m30-x-35-x-1000mm-lh-marked-with-colour-yellow-sku-65133000/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M24 x 3 x 1000mm LH marked with colour yellow SKU: 65132400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m24-x-3-x-1000mm-lh-marked-with-colour-yellow-sku-65132400/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M20 x 2,5 x 1000mm LH marked with colour yellow SKU: 65132000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m20-x-25-x-1000mm-lh-marked-with-colour-yellow-sku-65132000/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M16 x 2 x 1000mm LH marked with colour yellow SKU: 65131600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m16-x-2-x-1000mm-lh-marked-with-colour-yellow-sku-65131600/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M12 x 1,75 x 1000mm LH marked with colour yellow SKU: 65131200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m12-x-175-x-1000mm-lh-marked-with-colour-yellow-sku-65131200/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M10 x 1,5 x 1000mm LH marked with colour yellow SKU: 65131000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m10-x-15-x-1000mm-lh-marked-with-colour-yellow-sku-65131000/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M8 x 1,25 x 1000mm LH marked with colour yellow SKU: 65130800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m8-x-125-x-1000mm-lh-marked-with-colour-yellow-sku-65130800/): Material: Steel, strength 8.8, zinc plated.Threaded bars with medium-high strength. Marked with yellow paint.Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M36 x 4 x 2000mm RH marked with colour yellow SKU: 65123600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m36-x-4-x-2000mm-rh-marked-with-colour-yellow-sku-65123600/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M30 x 3,5 x 2000mm RH marked with colour yellow SKU: 65123000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m30-x-35-x-2000mm-rh-marked-with-colour-yellow-sku-65123000/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M24 x 3 x 2000mm RH marked with colour yellow SKU: 65122400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m24-x-3-x-2000mm-rh-marked-with-colour-yellow-sku-65122400/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M20 x 2,5 x 2000mm RH marked with colour yellow SKU: 65122000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m20-x-25-x-2000mm-rh-marked-with-colour-yellow-sku-65122000/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M16 x 2 x 2000mm RH marked with colour yellow SKU: 65121600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m16-x-2-x-2000mm-rh-marked-with-colour-yellow-sku-65121600/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M12 x 1,75 x 2000mm RH marked with colour yellow SKU: 65121200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m12-x-175-x-2000mm-rh-marked-with-colour-yellow-sku-65121200/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M10 x 1,5 x 2000mm RH marked with colour yellow SKU: 65121000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m10-x-15-x-2000mm-rh-marked-with-colour-yellow-sku-65121000/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M8 x 1,25 x 2000mm RH marked with colour yellow SKU: 65120800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m8-x-125-x-2000mm-rh-marked-with-colour-yellow-sku-65120800/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M36 x 4 x 1000mm RH marked with colour yellow SKU: 65103600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m36-x-4-x-1000mm-rh-marked-with-colour-yellow-sku-65103600/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M30 x 3,5 x 1000mm RH marked with colour yellow SKU: 65103000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m30-x-35-x-1000mm-rh-marked-with-colour-yellow-sku-65103000/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M24 x 3 x 1000mm RH marked with colour yellow SKU: 65102400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m24-x-3-x-1000mm-rh-marked-with-colour-yellow-sku-65102400/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M20 x 2,5 x 1000mm RH marked with colour yellow SKU: 65102000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m20-x-25-x-1000mm-rh-marked-with-colour-yellow-sku-65102000/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M16 x 2 x 1000mm RH marked with colour yellow SKU: 65101600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m16-x-2-x-1000mm-rh-marked-with-colour-yellow-sku-65101600/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M12 x 1,75 x 1000mm RH marked with colour yellow SKU: 65101200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m12-x-175-x-1000mm-rh-marked-with-colour-yellow-sku-65101200/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M10 x 1,5 x 1000mm RH marked with colour yellow SKU: 65101000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m10-x-15-x-1000mm-rh-marked-with-colour-yellow-sku-65101000/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M8 x 1,25 x 1000mm RH marked with colour yellow SKU: 65100800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m8-x-125-x-1000mm-rh-marked-with-colour-yellow-sku-65100800/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M6 x 1 x 1000mm RH marked with colour yellow SKU: 65100600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m6-x-1-x-1000mm-rh-marked-with-colour-yellow-sku-65100600/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M5 x 0,8 x 1000mm RH marked with colour yellow SKU: 65100500](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m5-x-08-x-1000mm-rh-marked-with-colour-yellow-sku-65100500/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 8.8 zinc plated M4 x 0,7 x 1000mm RH marked with colour yellow SKU: 65100400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-8-8-zinc-plated-m4-x-07-x-1000mm-rh-marked-with-colour-yellow-sku-65100400/): Material: Steel, strength 8.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2 m. Oher sizes and designs on request. Threaded bars with medium-high strength. Marked with yellow paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M30 x 3,5 x 2000mm RH marked with colour red SKU: 65099530](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m30-x-35-x-2000mm-rh-marked-with-colour-red-sku-65099530/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M24 x 3 x 2000mm RH marked with colour red SKU: 65099524](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m24-x-3-x-2000mm-rh-marked-with-colour-red-sku-65099524/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M20 x 2,5 x 2000mm RH marked with colour red SKU: 65099520](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m20-x-25-x-2000mm-rh-marked-with-colour-red-sku-65099520/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M16 x 2 x 2000mm RH marked with colour red SKU: 65099516](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m16-x-2-x-2000mm-rh-marked-with-colour-red-sku-65099516/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M12 x 1,75 x 2000mm RH marked with colour red SKU: 65099512](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m12-x-175-x-2000mm-rh-marked-with-colour-red-sku-65099512/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M10 x 1,5 x 2000mm RH marked with colour red SKU: 65099510](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m10-x-15-x-2000mm-rh-marked-with-colour-red-sku-65099510/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M8 x 1,25 x 2000mm RH marked with colour red SKU: 65099508](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m8-x-125-x-2000mm-rh-marked-with-colour-red-sku-65099508/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M30 x 3,5 x 1000mm RH marked with colour red SKU: 65099430](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m30-x-35-x-1000mm-rh-marked-with-colour-red-sku-65099430/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M24 x 3 x 1000mm RH marked with colour red SKU: 65099424](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m24-x-3-x-1000mm-rh-marked-with-colour-red-sku-65099424/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M20 x 2,5 x 1000mm RH marked with colour red SKU: 65099420](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m20-x-25-x-1000mm-rh-marked-with-colour-red-sku-65099420/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M16 x 2 x 1000mm RH marked with colour red SKU: 65099416](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m16-x-2-x-1000mm-rh-marked-with-colour-red-sku-65099416/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M12 x 1,75 x 1000mm RH marked with colour red SKU: 65099412](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m12-x-175-x-1000mm-rh-marked-with-colour-red-sku-65099412/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M10 x 1,5 x 1000mm RH marked with colour red SKU: 65099410](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m10-x-15-x-1000mm-rh-marked-with-colour-red-sku-65099410/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M8 x 1,25 x 1000mm RH marked with colour red SKU: 65099408](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m8-x-125-x-1000mm-rh-marked-with-colour-red-sku-65099408/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M6 x 1 x 1000mm RH marked with colour red SKU: 65099406](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m6-x-1-x-1000mm-rh-marked-with-colour-red-sku-65099406/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M5 x 0,8 x 1000mm RH marked with colour red SKU: 65099405](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m5-x-08-x-1000mm-rh-marked-with-colour-red-sku-65099405/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M4 x 0,7 x 1000mm RH marked with colour red SKU: 65099404](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m4-x-07-x-1000mm-rh-marked-with-colour-red-sku-65099404/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V4A M3 x 0,5 x 1000mm RH marked with colour red SKU: 65099403](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v4a-m3-x-05-x-1000mm-rh-marked-with-colour-red-sku-65099403/): Material: Stainless steel V4A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with red paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M30 x 3,5 x 2000mm RH marked with colour green SKU: 65099230](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m30-x-35-x-2000mm-rh-marked-with-colour-green-sku-65099230/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M24 x 3 x 2000mm RH marked with colour green SKU: 65099224](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m24-x-3-x-2000mm-rh-marked-with-colour-green-sku-65099224/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M20 x 2,5 x 2000mm RH marked with colour green SKU: 65099220](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m20-x-25-x-2000mm-rh-marked-with-colour-green-sku-65099220/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M16 x 2 x 2000mm RH marked with colour green SKU: 65099216](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m16-x-2-x-2000mm-rh-marked-with-colour-green-sku-65099216/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M12 x 1,75 x 2000mm RH marked with colour green SKU: 65099212](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m12-x-175-x-2000mm-rh-marked-with-colour-green-sku-65099212/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M10 x 1,5 x 2000mm RH marked with colour green SKU: 65099210](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m10-x-15-x-2000mm-rh-marked-with-colour-green-sku-65099210/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M8 x 1,25 x 2000mm RH marked with colour green SKU: 65099208](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m8-x-125-x-2000mm-rh-marked-with-colour-green-sku-65099208/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M30 x 3,5 x 1000mm RH marked with colour green SKU: 65099030](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m30-x-35-x-1000mm-rh-marked-with-colour-green-sku-65099030/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M24 x 3 x 1000mm RH marked with colour green SKU: 65099024](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m24-x-3-x-1000mm-rh-marked-with-colour-green-sku-65099024/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M20 x 2,5 x 1000mm RH marked with colour green SKU: 65099020](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m20-x-25-x-1000mm-rh-marked-with-colour-green-sku-65099020/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M16 x 2 x 1000mm RH marked with colour green SKU: 65099016](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m16-x-2-x-1000mm-rh-marked-with-colour-green-sku-65099016/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M12 x 1,75 x 1000mm RH marked with colour green SKU: 65099012](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m12-x-175-x-1000mm-rh-marked-with-colour-green-sku-65099012/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M10 x 1,5 x 1000mm RH marked with colour green SKU: 65099010](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m10-x-15-x-1000mm-rh-marked-with-colour-green-sku-65099010/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M8 x 1,25 x 1000mm RH marked with colour green SKU: 65099008](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m8-x-125-x-1000mm-rh-marked-with-colour-green-sku-65099008/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M6 x 1 x 1000mm RH marked with colour green SKU: 65099006](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m6-x-1-x-1000mm-rh-marked-with-colour-green-sku-65099006/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M5 x 0,8 x 1000mm RH marked with colour green SKU: 65099005](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m5-x-08-x-1000mm-rh-marked-with-colour-green-sku-65099005/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M4 x 0,7 x 1000mm RH marked with colour green SKU: 65099004](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m4-x-07-x-1000mm-rh-marked-with-colour-green-sku-65099004/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) stainless steel V2A M3 x 0,5 x 1000mm RH marked with colour green SKU: 65099003](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-stainless-steel-v2a-m3-x-05-x-1000mm-rh-marked-with-colour-green-sku-65099003/): Material: Stainless steel V2A. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length either 1 m or 2m. Marked with green paint. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M30 x 2 x 1000mm RH SKU: 65073000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m30-x-2-x-1000mm-rh-sku-65073000/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO fine-thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M24 x 1,5 x 1000mm RH SKU: 65072400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m24-x-15-x-1000mm-rh-sku-65072400/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO fine-thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M20 x 1,5 x 1000mm RH SKU: 65072000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m20-x-15-x-1000mm-rh-sku-65072000/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO fine-thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M16 x 1,5 x 1000mm RH SKU: 65071600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m16-x-15-x-1000mm-rh-sku-65071600/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO fine-thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M12 x 1,5 x 1000mm RH SKU: 65071200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m12-x-15-x-1000mm-rh-sku-65071200/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO fine-thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M10 x 1 x 1000mm RH SKU: 65071000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m10-x-1-x-1000mm-rh-sku-65071000/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO fine-thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M8 x 1 x 1000mm RH SKU: 65070800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m8-x-1-x-1000mm-rh-sku-65070800/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO fine-thread. Length 1 m. Threaded bars in standard quality, for light loads. Right-handed fine thread. - [Threaded bar DIN 976-1 A (ex DIN 975) brass Ms60 M20 x 2,5 x 1000mm RH SKU: 65042000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-brass-ms60-m20-x-25-x-1000mm-rh-sku-65042000/): Material: Brass Ms60 (CuZn40). Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) brass Ms60 M16 x 2 x 1000mm RH SKU: 65041600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-brass-ms60-m16-x-2-x-1000mm-rh-sku-65041600/): Material: Brass Ms60 (CuZn40). Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) brass Ms60 M12 x 1,75 x 1000mm RH SKU: 65041200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-brass-ms60-m12-x-175-x-1000mm-rh-sku-65041200/): Material: Brass Ms60 (CuZn40). Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) brass Ms60 M10 x 1,5 x 1000mm RH SKU: 65041000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-brass-ms60-m10-x-15-x-1000mm-rh-sku-65041000/): Material: Brass Ms60 (CuZn40). Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) brass Ms60 M8 x 1,25 x 1000mm RH SKU: 65040800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-brass-ms60-m8-x-125-x-1000mm-rh-sku-65040800/): Material: Brass Ms60 (CuZn40). Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) brass Ms60 M6 x 1 x 1000mm RH SKU: 65040600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-brass-ms60-m6-x-1-x-1000mm-rh-sku-65040600/): Material: Brass Ms60 (CuZn40). Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) brass Ms60 M5 x 0,8 x 1000mm RH SKU: 65040500](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-brass-ms60-m5-x-08-x-1000mm-rh-sku-65040500/): Material: Brass Ms60 (CuZn40). Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) brass Ms60 M4 x 0,7 x 1000mm RH SKU: 65040400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-brass-ms60-m4-x-07-x-1000mm-rh-sku-65040400/): Material: Brass Ms60 (CuZn40). Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) brass Ms60 M3 x 0,5 x 1000mm RH SKU: 65040300](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-brass-ms60-m3-x-05-x-1000mm-rh-sku-65040300/): Material: Brass Ms60 (CuZn40). Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M30 x 3,5 x 1000mm LH SKU: 65033000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m30-x-35-x-1000mm-lh-sku-65033000/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread, left-handed. Length 1 m. Threaded bars in standard quality, for light loads. Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M24 x 3 x 1000mm LH SKU: 65032400](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m24-x-3-x-1000mm-lh-sku-65032400/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread, left-handed. Length 1 m. Threaded bars in standard quality, for light loads. Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M20 x 2,5 x 1000mm LH SKU: 65032000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m20-x-25-x-1000mm-lh-sku-65032000/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread, left-handed. Length 1 m. Threaded bars in standard quality, for light loads. Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M16 x 2 x 1000mm LH SKU: 65031600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m16-x-2-x-1000mm-lh-sku-65031600/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread, left-handed. Length 1 m. Threaded bars in standard quality, for light loads. Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M12 x 1,75 x 1000mm LH SKU: 65031200](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m12-x-175-x-1000mm-lh-sku-65031200/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread, left-handed. Length 1 m. Threaded bars in standard quality, for light loads. Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M10 x 1,5 x 1000mm LH SKU: 65031000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m10-x-15-x-1000mm-lh-sku-65031000/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread, left-handed. Length 1 m. Threaded bars in standard quality, for light loads. Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M8 x 1,25 x 1000mm LH SKU: 65030800](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m8-x-125-x-1000mm-lh-sku-65030800/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread, left-handed. Length 1 m. Threaded bars in standard quality, for light loads. Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M6 x 1 x 1000mm LH SKU: 65030600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m6-x-1-x-1000mm-lh-sku-65030600/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread, left-handed. Length 1 m. Threaded bars in standard quality, for light loads. Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 4.8 zinc plated M5 x 0,8 x 1000mm LH SKU: 65030500](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-4-8-zinc-plated-m5-x-08-x-1000mm-lh-sku-65030500/): Material: Steel strength 4.8, zinc plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread, left-handed. Length 1 m. Threaded bars in standard quality, for light loads. Left-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 zinc plated M36 x 4 x 1000mm RH marked with colour white SKU: 65023600](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-zinc-plated-m36-x-4-x-1000mm-rh-marked-with-colour-white-sku-65023600/): Material: Steel, strength 10.9, zinc-plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Threaded bar DIN 976-1 A (ex DIN 975) steel 10.9 zinc plated M30 x 3,5 x 1000mm RH marked with colour white SKU: 65023000](https://maedler.in/product/threaded-bar-din-976-1-a-ex-din-975-steel-10-9-zinc-plated-m30-x-35-x-1000mm-rh-marked-with-colour-white-sku-65023000/): Material: Steel, strength 10.9, zinc-plated. Threaded bars according to DIN 976-1 shape A (ex DIN 975), with metric ISO thread. Length 1 m. Threaded bars with high strength. Marked with white paint. Right-handed thread. - [Bevel gearbox KU/I model H size 25 version 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207105](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207105/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207104](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207104/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207103](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207102](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207101](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207100](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207006](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207006/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207005](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207005/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207004](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207004/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207003](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207003/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207002](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207002/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207001](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207001/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207000](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207000/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206806](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206806/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206805](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206805/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206804](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206804/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206803](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206803/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206802](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206802/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206801](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206801/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206800](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206800/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206706](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206706/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206705](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206705/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206704](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206704/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206703](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206703/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206702](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206702/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206701](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206701/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 2 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206700](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-2-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206700/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206506](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206506/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206505](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206505/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206504](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206504/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206503](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206503/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206502](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206502/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206501](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206501/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206500](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206500/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206406](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206406/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206405](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206404](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206403](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206402](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206401](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 1 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206400](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-1-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206203](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206203/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206202](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206202/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206201](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206201/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206200](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206200/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206103](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206102](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206101](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 0 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41206100](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-0-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41206100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Miniature Bevel gearbox MKU, type H, size 045, type 80, gear ratio 4:1 SKU: 41204584](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-80-gear-ratio-41-sku-41204584/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 80, gear ratio 3:1 SKU: 41204583](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-80-gear-ratio-31-sku-41204583/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 80, gear ratio 2:1 SKU: 41204582](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-80-gear-ratio-21-sku-41204582/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 80, gear ratio 1:1 SKU: 41204581](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-80-gear-ratio-11-sku-41204581/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 70, gear ratio 4:1 SKU: 41204574](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-70-gear-ratio-41-sku-41204574/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 70, gear ratio 3:1 SKU: 41204573](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-70-gear-ratio-31-sku-41204573/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 70, gear ratio 2:1 SKU: 41204572](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-70-gear-ratio-21-sku-41204572/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type H, size 045, type 70, gear ratio 1:1 SKU: 41204571](https://maedler.in/product/miniature-bevel-gearbox-mku-type-h-size-045-type-70-gear-ratio-11-sku-41204571/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 60, gear ratio 4:1 SKU: 41204564](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-60-gear-ratio-41-sku-41204564/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 60, gear ratio 3:1 SKU: 41204563](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-60-gear-ratio-31-sku-41204563/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 60, gear ratio 2:1 SKU: 41204562](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-60-gear-ratio-21-sku-41204562/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 60, gear ratio 1:1 SKU: 41204561](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-60-gear-ratio-11-sku-41204561/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 30, gear ratio 4:1 SKU: 41204534](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-30-gear-ratio-41-sku-41204534/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 30, gear ratio 3:1 SKU: 41204533](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-30-gear-ratio-31-sku-41204533/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 30, gear ratio 2:1 SKU: 41204532](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-30-gear-ratio-21-sku-41204532/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type L, size 045, type 30, gear ratio 1:1 SKU: 41204531](https://maedler.in/product/miniature-bevel-gearbox-mku-type-l-size-045-type-30-gear-ratio-11-sku-41204531/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 20, gear ratio 4:1 SKU: 41204524](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-20-gear-ratio-41-sku-41204524/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 20, gear ratio 3:1 SKU: 41204523](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-20-gear-ratio-31-sku-41204523/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 20, gear ratio 2:1 SKU: 41204522](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-20-gear-ratio-21-sku-41204522/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 20, gear ratio 1:1 SKU: 41204521](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-20-gear-ratio-11-sku-41204521/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication. Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°. Bearing: Life time min. 15,000h. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting. Permiss. Ambient temperature -10°C bis +90°C. ** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 10, gear ratio 4:1 SKU: 41204514](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-10-gear-ratio-41-sku-41204514/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 10, gear ratio 3:1 SKU: 41204513](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-10-gear-ratio-31-sku-41204513/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 10, gear ratio 2:1 SKU: 41204512](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-10-gear-ratio-21-sku-41204512/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Miniature Bevel gearbox MKU, type K, size 045, type 10, gear ratio 1:1 SKU: 41204511](https://maedler.in/product/miniature-bevel-gearbox-mku-type-k-size-045-type-10-gear-ratio-11-sku-41204511/): Miniature angular gear unit for particularly high loads and long service life. Very robust construction,as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available inratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes,please enquire. Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceuticindustry and with grease lubrication.Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust.Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters c, l1and l2 are provided for use as alignment studs.Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.Bearing: Life time min. 15,000h.Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.Permiss. Ambient temperature -10°C bis +90°C.** The values of the performance tables apply at an ambient temperature of 20°C - [Bevel gearbox KU/I model L size 30 version 60 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204405](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204404](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204403](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204402](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204401](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204400](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204305](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204305/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204304](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204304/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204303](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204303/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204302](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204302/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204301](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204301/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 30 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204300](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-30-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204300/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204106](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204106/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204105](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204105/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204104](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204104/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204103](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204103/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204102](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204102/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204101](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204101/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 60 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204100](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-60-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204100/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204006](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204006/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204005](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204005/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204004](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204004/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204003](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204003/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204002](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204002/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204001](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204001/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 25 version 30 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41204000](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-25-version-30-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41204000/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Bevel gearbox KU/I model L size 2 version 60 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41203806](https://maedler.in/product/bevel-gearbox-ku-i-model-l-size-2-version-60-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41203806/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M36 stainless steel A2 SKU: 652236A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m36-stainless-steel-a2-sku-652236a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M30 steel zinc plated property class 10 SKU: 65223010](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m30-steel-zinc-plated-property-class-10-sku-65223010/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M30 steel zinc plated property class 8 SKU: 65223008](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m30-steel-zinc-plated-property-class-8-sku-65223008/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M30 stainless steel A4 SKU: 652230A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m30-stainless-steel-a4-sku-652230a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M30 stainless steel A2 SKU: 652230A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m30-stainless-steel-a2-sku-652230a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10512) with polyamid insert M24x1,5 steel zinc plated property class 10 SKU: 65222410F](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10512-with-polyamid-insert-m24x15-steel-zinc-plated-property-class-10-sku-65222410f/): Material: Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts nuts according to the old standard DIN 985 with metric ISO fine thread.The standard DIN 985 was replaced by DIN EN ISO 10512. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M24 steel zinc plated property class 10 SKU: 65222410](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m24-steel-zinc-plated-property-class-10-sku-65222410/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M24 steel zinc plated property class 8 SKU: 65222408](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m24-steel-zinc-plated-property-class-8-sku-65222408/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M24 stainless steel A4 SKU: 652224A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m24-stainless-steel-a4-sku-652224a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M24 stainless steel A2 SKU: 652224A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m24-stainless-steel-a2-sku-652224a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10512) with polyamid insert M20x1,5 steel zinc plated property class 10 SKU: 65222010F](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10512-with-polyamid-insert-m20x15-steel-zinc-plated-property-class-10-sku-65222010f/): Material: Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts nuts according to the old standard DIN 985 with metric ISO fine thread.The standard DIN 985 was replaced by DIN EN ISO 10512. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M20 steel zinc plated property class 10 SKU: 65222010](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m20-steel-zinc-plated-property-class-10-sku-65222010/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M20 steel zinc plated property class 8 SKU: 65222008](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m20-steel-zinc-plated-property-class-8-sku-65222008/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M20 stainless steel A4 SKU: 652220A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m20-stainless-steel-a4-sku-652220a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M20 stainless steel A2 SKU: 652220A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m20-stainless-steel-a2-sku-652220a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10512) with polyamid insert M16x1,5 steel zinc plated property class 10 SKU: 65221610F](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10512-with-polyamid-insert-m16x15-steel-zinc-plated-property-class-10-sku-65221610f/): Material: Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts nuts according to the old standard DIN 985 with metric ISO fine thread.The standard DIN 985 was replaced by DIN EN ISO 10512. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M16 steel zinc plated property class 10 SKU: 65221610](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m16-steel-zinc-plated-property-class-10-sku-65221610/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M16 steel zinc plated property class 8 SKU: 65221608](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m16-steel-zinc-plated-property-class-8-sku-65221608/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M16 stainless steel A4 SKU: 652216A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m16-stainless-steel-a4-sku-652216a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M16 stainless steel A2 SKU: 652216A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m16-stainless-steel-a2-sku-652216a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10512) with polyamid insert M14x1,5 steel zinc plated property class 10 SKU: 65221410F](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10512-with-polyamid-insert-m14x15-steel-zinc-plated-property-class-10-sku-65221410f/): Material: Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts nuts according to the old standard DIN 985 with metric ISO fine thread.The standard DIN 985 was replaced by DIN EN ISO 10512. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M14 steel zinc plated property class 10 SKU: 65221410](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m14-steel-zinc-plated-property-class-10-sku-65221410/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M14 steel zinc plated property class 8 SKU: 65221408](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m14-steel-zinc-plated-property-class-8-sku-65221408/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M14 stainless steel A4 SKU: 652214A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m14-stainless-steel-a4-sku-652214a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M14 stainless steel A2 SKU: 652214A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m14-stainless-steel-a2-sku-652214a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10512) with polyamid insert M12x1,5 steel zinc plated property class 10 SKU: 65221210F](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10512-with-polyamid-insert-m12x15-steel-zinc-plated-property-class-10-sku-65221210f/): Material: Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts nuts according to the old standard DIN 985 with metric ISO fine thread.The standard DIN 985 was replaced by DIN EN ISO 10512. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M12 steel zinc plated property class 10 SKU: 65221210](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m12-steel-zinc-plated-property-class-10-sku-65221210/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M12 steel zinc plated property class 8 SKU: 65221208](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m12-steel-zinc-plated-property-class-8-sku-65221208/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M12 stainless steel A4 SKU: 652212A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m12-stainless-steel-a4-sku-652212a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M12 stainless steel A2 SKU: 652212A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m12-stainless-steel-a2-sku-652212a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10512) with polyamid insert M10x1,0 steel zinc plated property class 10 SKU: 65221010F](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10512-with-polyamid-insert-m10x10-steel-zinc-plated-property-class-10-sku-65221010f/): Material: Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts nuts according to the old standard DIN 985 with metric ISO fine thread.The standard DIN 985 was replaced by DIN EN ISO 10512. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M10 steel zinc plated property class 10 SKU: 65221010](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m10-steel-zinc-plated-property-class-10-sku-65221010/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M10 steel zinc plated property class 8 SKU: 65221008](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m10-steel-zinc-plated-property-class-8-sku-65221008/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M10 stainless steel A4 SKU: 652210A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m10-stainless-steel-a4-sku-652210a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M10 stainless steel A2 SKU: 652210A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m10-stainless-steel-a2-sku-652210a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10512) with polyamid insert M8x1,0 steel zinc plated property class 10 SKU: 65220810F](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10512-with-polyamid-insert-m8x10-steel-zinc-plated-property-class-10-sku-65220810f/): Material: Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts nuts according to the old standard DIN 985 with metric ISO fine thread.The standard DIN 985 was replaced by DIN EN ISO 10512. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M8 steel zinc plated property class 10 SKU: 65220810](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m8-steel-zinc-plated-property-class-10-sku-65220810/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M8 steel zinc plated property class 8 SKU: 65220808](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m8-steel-zinc-plated-property-class-8-sku-65220808/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M8 stainless steel A4 SKU: 652208A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m8-stainless-steel-a4-sku-652208a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M8 stainless steel A2 SKU: 652208A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m8-stainless-steel-a2-sku-652208a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M6 steel zinc plated property class 10 SKU: 65220610](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m6-steel-zinc-plated-property-class-10-sku-65220610/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M6 steel zinc plated property class 8 SKU: 65220608](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m6-steel-zinc-plated-property-class-8-sku-65220608/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M6 stainless steel A4 SKU: 652206A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m6-stainless-steel-a4-sku-652206a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M6 stainless steel A2 SKU: 652206A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m6-stainless-steel-a2-sku-652206a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M5 steel zinc plated property class 8 SKU: 65220508](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m5-steel-zinc-plated-property-class-8-sku-65220508/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M5 stainless steel A4 SKU: 652205A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m5-stainless-steel-a4-sku-652205a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M5 stainless steel A2 SKU: 652205A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m5-stainless-steel-a2-sku-652205a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M4 steel zinc plated property class 8 SKU: 65220408](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m4-steel-zinc-plated-property-class-8-sku-65220408/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M4 stainless steel A4 SKU: 652204A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m4-stainless-steel-a4-sku-652204a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M4 stainless steel A2 SKU: 652204A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m4-stainless-steel-a2-sku-652204a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M3 steel zinc plated property class 8 SKU: 65220308](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m3-steel-zinc-plated-property-class-8-sku-65220308/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M3 stainless steel A4 SKU: 652203A4](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m3-stainless-steel-a4-sku-652203a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M3 stainless steel A2 SKU: 652203A2](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m3-stainless-steel-a2-sku-652203a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M24 steel zinc plated property class 10 SKU: 65212410](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m24-steel-zinc-plated-property-class-10-sku-65212410/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M24 steel zinc plated property class 8 SKU: 65212408](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m24-steel-zinc-plated-property-class-8-sku-65212408/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M24 stainless steel A4 SKU: 652124A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m24-stainless-steel-a4-sku-652124a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M24 stainless steel A2 SKU: 652124A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m24-stainless-steel-a2-sku-652124a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M20 steel zinc plated property class 10 SKU: 65212010](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m20-steel-zinc-plated-property-class-10-sku-65212010/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M20 steel zinc plated property class 8 SKU: 65212008](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m20-steel-zinc-plated-property-class-8-sku-65212008/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M20 stainless steel A4 SKU: 652120A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m20-stainless-steel-a4-sku-652120a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M20 stainless steel A2 SKU: 652120A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m20-stainless-steel-a2-sku-652120a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M16 steel zinc plated property class 10 SKU: 65211610](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m16-steel-zinc-plated-property-class-10-sku-65211610/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M16 steel zinc plated property class 8 SKU: 65211608](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m16-steel-zinc-plated-property-class-8-sku-65211608/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M16 stainless steel A4 SKU: 652116A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m16-stainless-steel-a4-sku-652116a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M16 stainless steel A2 SKU: 652116A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m16-stainless-steel-a2-sku-652116a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M14 steel zinc plated property class 10 SKU: 65211410](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m14-steel-zinc-plated-property-class-10-sku-65211410/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M14 steel zinc plated property class 8 SKU: 65211408](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m14-steel-zinc-plated-property-class-8-sku-65211408/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M14 stainless steel A4 SKU: 652114A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m14-stainless-steel-a4-sku-652114a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M14 stainless steel A2 SKU: 652114A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m14-stainless-steel-a2-sku-652114a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M12 steel zinc plated property class 10 SKU: 65211210](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m12-steel-zinc-plated-property-class-10-sku-65211210/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M12 steel zinc plated property class 8 SKU: 65211208](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m12-steel-zinc-plated-property-class-8-sku-65211208/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M12 stainless steel A4 SKU: 652112A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m12-stainless-steel-a4-sku-652112a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M12 stainless steel A2 SKU: 652112A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m12-stainless-steel-a2-sku-652112a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M10 steel zinc plated property class 10 SKU: 65211010](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m10-steel-zinc-plated-property-class-10-sku-65211010/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M10 steel zinc plated property class 8 SKU: 65211008](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m10-steel-zinc-plated-property-class-8-sku-65211008/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M10 stainless steel A4 SKU: 652110A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m10-stainless-steel-a4-sku-652110a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M10 stainless steel A2 SKU: 652110A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m10-stainless-steel-a2-sku-652110a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M8 steel zinc plated property class 10 SKU: 65210810](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m8-steel-zinc-plated-property-class-10-sku-65210810/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M8 steel zinc plated property class 8 SKU: 65210808](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m8-steel-zinc-plated-property-class-8-sku-65210808/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M8 stainless steel A4 SKU: 652108A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m8-stainless-steel-a4-sku-652108a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M8 stainless steel A2 SKU: 652108A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m8-stainless-steel-a2-sku-652108a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M6 steel zinc plated property class 10 SKU: 65210610](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m6-steel-zinc-plated-property-class-10-sku-65210610/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M6 steel zinc plated property class 8 SKU: 65210608](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m6-steel-zinc-plated-property-class-8-sku-65210608/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M6 stainless steel A4 SKU: 652106A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m6-stainless-steel-a4-sku-652106a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M6 stainless steel A2 SKU: 652106A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m6-stainless-steel-a2-sku-652106a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M5 steel zinc plated property class 8 SKU: 65210508](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m5-steel-zinc-plated-property-class-8-sku-65210508/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M5 stainless steel A4 SKU: 652105A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m5-stainless-steel-a4-sku-652105a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M5 stainless steel A2 SKU: 652105A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m5-stainless-steel-a2-sku-652105a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M4 steel zinc plated property class 8 SKU: 65210408](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m4-steel-zinc-plated-property-class-8-sku-65210408/): Material: Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M4 stainless steel A4 SKU: 652104A4](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m4-stainless-steel-a4-sku-652104a4/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 982 (similar DIN EN ISO 7040) with polyamid insert M4 stainless steel A2 SKU: 652104A2](https://maedler.in/product/hexagon-nut-din-982-similar-din-en-iso-7040-with-polyamid-insert-m4-stainless-steel-a2-sku-652104a2/): Material: Stainless steel V2A (A2) or V4A (A4).Self-locking hexagon nuts according to the old standard DIN 982 with metric ISO thread.The standard DIN 982 was replaced by DIN EN ISO 7040. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 982 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M36 right handed SKU: 65203600](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m36-right-handed-sku-65203600/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M30 right handed SKU: 65203000](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m30-right-handed-sku-65203000/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M24 right handed SKU: 65202400](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m24-right-handed-sku-65202400/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M20 right handed SKU: 65202000](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m20-right-handed-sku-65202000/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M16 right handed SKU: 65201600](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m16-right-handed-sku-65201600/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M12 right handed SKU: 65201200](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m12-right-handed-sku-65201200/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M10 right handed SKU: 65201000](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m10-right-handed-sku-65201000/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M8 right handed SKU: 65200800](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m8-right-handed-sku-65200800/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M6 right handed SKU: 65200600](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m6-right-handed-sku-65200600/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Worm gear unit ZM/I version A size 63 i=4.83:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102100](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i4-831-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102100/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 50, i=39,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101314](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-50-i3901-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101314/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 50, i=72,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101313](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-50-i7201-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101313/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 50, i=72,0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101312](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-50-i7201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101312/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=83:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101311](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i831-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101311/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=62.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101310](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i62-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101310/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=51.0 1" (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101309](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i51-0-1-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101309/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=38.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101308](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i38-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101308/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=29.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101307](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i29-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101307/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=25.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101306](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i25-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101306/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=19.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101305](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i19-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101305/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=14.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101304](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i14-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101304/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=12.75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101303](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i12-751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101303/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=9.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101302](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i9-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101302/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=7.25:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101301](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i7-251-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101301/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 50 i=4.83:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101300](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-50-i4-831-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101300/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 39:1 product No. 42101314 and 72:1 product No. 42101313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 50, i=72,0:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101127](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-50-i7201-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4210-2/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 50, i=72,0:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101126](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-50-i7201-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4210/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 50, i=72,0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101125](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-50-i7201-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101125/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 50, i=72,0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101124](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-50-i7201-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101124/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=83:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101123](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i831-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101123/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=83:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101122](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i831-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101122/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=62.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101121](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i62-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101121/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=62.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101120](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i62-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101120/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=51.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101119](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i51-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101119/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=51.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101118](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i51-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101118/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=38.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101117](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i38-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101117/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=38.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101116](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i38-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101116/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=29.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101115](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i29-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101115/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=29.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101114](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i29-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101114/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=25.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101113](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i25-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101113/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=25.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101112](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i25-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101112/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=19.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101111](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i19-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101111/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=19.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101110](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i19-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101110/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=14.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101109](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i14-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101109/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=14.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101108](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i14-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101108/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=12.75:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101107](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i12-751-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101107/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=12.75:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101106](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i12-751-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101106/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=9.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101105](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i9-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101105/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=9.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101104](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i9-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101104/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=7.25:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101103](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i7-251-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101103/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=7.25:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101102](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i7-251-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101102/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=4.83:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101101](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i4-831-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101101/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 50 i=4.83:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42101100](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-50-i4-831-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42101100/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 83 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42101126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 40, i=40,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100314](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-40-i4001-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100314/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 40, i=72,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100313](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-40-i7201-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100313/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 40, i=72,0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100312](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-40-i7201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100312/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=82.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100311](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i82-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100311/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=63.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100310](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i63-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100310/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=52.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100309](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i52-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100309/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=39.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100308](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i39-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100308/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=29.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100307](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i29-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100307/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=26.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100306](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i26-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100306/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=19.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100305](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i19-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100305/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=14.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100304](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i14-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100304/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=13.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100303](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i13-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100303/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=9.75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100302](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i9-751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100302/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=7.25:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100301](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i7-251-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100301/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 40 i=4.83:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100300](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-40-i4-831-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100300/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 40, i=72,0:1 output flange side 6 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100127](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-40-i7201-output-flange-side-6-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4210/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 40, i=72,0:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100126](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-40-i7201-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4210/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 40, i=72,0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100125](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-40-i7201-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100125/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 40, i=72,0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100124](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-40-i7201-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100124/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=82.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100123](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i82-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100123/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=82.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100122](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i82-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100122/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=63.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100121](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i63-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100121/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=63.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100120](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i63-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100120/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=52.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100119](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i52-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100119/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=52.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100118](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i52-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100118/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=39.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100117](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i39-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100117/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=39.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100116](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i39-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100116/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=29.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100115](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i29-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100115/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=29.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100114](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i29-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100114/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=26.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100113](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i26-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100113/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=26.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100112](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i26-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100112/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=19.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100111](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i19-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100111/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=19.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100110](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i19-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100110/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=14.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100109](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i14-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100109/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=14.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100108](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i14-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100108/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=13.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100107](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i13-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100107/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=13.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100106](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i13-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100106/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=9.75:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100105](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i9-751-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100105/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=9.75:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100104](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i9-751-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100104/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=7.25:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100103](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i7-251-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100103/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=7.25:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100102](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i7-251-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100102/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=4.83:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100101](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i4-831-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100101/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 40 i=4.83:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42100100](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-40-i4-831-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42100100/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42100126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter. - [Bevel gearbox KU/I model H size 30 version 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207405](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207405/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207404](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207404/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207403](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207403/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207402](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207402/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207401](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207401/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 80 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207400](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-80-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207400/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207305](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207305/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=4:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207304](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i41-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207304/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=3:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207303](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i31-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207303/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=2:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207302](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i21-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207302/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=1.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207301](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i1-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207301/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 30 version 70 i=1:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207300](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-30-version-70-i11-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207300/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Bevel gearbox KU/I model H size 25 version 80 i=6:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 41207106](https://maedler.in/product/bevel-gearbox-ku-i-model-h-size-25-version-80-i61-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-41207106/): General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model H: Straight-through hollow shaft, slowly turning. - [Locknut DIN 1804 type W M14x1.5 black finishing SKU: 65261400](https://maedler.in/product/locknut-din-1804-type-w-m14x1-5-black-finishing-sku-65261400/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type W M12x1.5 black finishing SKU: 65261200](https://maedler.in/product/locknut-din-1804-type-w-m12x1-5-black-finishing-sku-65261200/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 10mm plain steel SKU: 65261001](https://maedler.in/product/internal-tab-washer-din-462-inner-o-10mm-plain-steel-sku-65261001/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M10x1 black finishing SKU: 65261000](https://maedler.in/product/locknut-din-1804-type-w-m10x1-black-finishing-sku-65261000/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 8mm plain steel SKU: 65260801](https://maedler.in/product/internal-tab-washer-din-462-inner-o-8mm-plain-steel-sku-65260801/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M8x1 black finishing SKU: 65260800](https://maedler.in/product/locknut-din-1804-type-w-m8x1-black-finishing-sku-65260800/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Hexagon nut DIN 934 steel strength 8 zinc plated fine thread M30x2mm right handed SKU: 65253000](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-fine-thread-m30x2mm-right-handed-sku-65253000/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO fine thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc plated fine thread M24x1.5mm right handed SKU: 65252400](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-fine-thread-m24x1-5mm-right-handed-sku-65252400/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO fine thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc plated fine thread M20x1.5mm right handed SKU: 65252000](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-fine-thread-m20x1-5mm-right-handed-sku-65252000/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO fine thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc plated fine thread M16x1.5mm right handed SKU: 65251600](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-fine-thread-m16x1-5mm-right-handed-sku-65251600/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO fine thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc plated fine thread M12x1.5mm right handed SKU: 65251200](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-fine-thread-m12x1-5mm-right-handed-sku-65251200/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO fine thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc plated fine thread M10x1mm right handed SKU: 65251000](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-fine-thread-m10x1mm-right-handed-sku-65251000/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO fine thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc plated fine thread M8x1mm right handed SKU: 65250800](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-fine-thread-m8x1mm-right-handed-sku-65250800/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO fine thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [locknut KMM splitted with clamp screw size 20 M100x2 steel zinc-plated SKU: 65244100K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-20-m100x2-steel-zinc-plated-sku-65244100k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 20 M100 x 2 steel zinc-plated with polyamid insert SKU: 65244100](https://maedler.in/product/locknut-guk-20-m100-x-2-steel-zinc-plated-with-polyamid-insert-sku-65244100/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 19 M95x2 steel zinc-plated SKU: 65244000K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-19-m95x2-steel-zinc-plated-sku-65244000k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 19 M95 x 2 steel zinc-plated with polyamid insert SKU: 65244000](https://maedler.in/product/locknut-guk-19-m95-x-2-steel-zinc-plated-with-polyamid-insert-sku-65244000/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 18 M90x2 steel zinc-plated SKU: 65243900K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-18-m90x2-steel-zinc-plated-sku-65243900k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 18 M90 x 2 steel zinc-plated with polyamid insert SKU: 65243900](https://maedler.in/product/locknut-guk-18-m90-x-2-steel-zinc-plated-with-polyamid-insert-sku-65243900/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 17 M85x2 steel zinc-plated SKU: 65243800K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-17-m85x2-steel-zinc-plated-sku-65243800k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 17 M85 x 2 steel zinc-plated with polyamid insert SKU: 65243800](https://maedler.in/product/locknut-guk-17-m85-x-2-steel-zinc-plated-with-polyamid-insert-sku-65243800/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 16 M80x2 steel zinc-plated SKU: 65243700K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-16-m80x2-steel-zinc-plated-sku-65243700k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 16 M80 x 2 steel zinc-plated with polyamid insert SKU: 65243700](https://maedler.in/product/locknut-guk-16-m80-x-2-steel-zinc-plated-with-polyamid-insert-sku-65243700/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [Locknut GUK 16a M80 x 1,5 steel zinc-plated with polyamid insert SKU: 65243600](https://maedler.in/product/locknut-guk-16a-m80-x-15-steel-zinc-plated-with-polyamid-insert-sku-65243600/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [Locknut GUK 15 M75 x 2 steel zinc-plated with polyamid insert SKU: 65243500](https://maedler.in/product/locknut-guk-15-m75-x-2-steel-zinc-plated-with-polyamid-insert-sku-65243500/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 15 M75x2 steel zinc-plated SKU: 65243400K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-15-m75x2-steel-zinc-plated-sku-65243400k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 15a M75 x 1,5 steel zinc-plated with polyamid insert SKU: 65243400](https://maedler.in/product/locknut-guk-15a-m75-x-15-steel-zinc-plated-with-polyamid-insert-sku-65243400/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 14 M70x2 steel zinc-plated SKU: 65243300K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-14-m70x2-steel-zinc-plated-sku-65243300k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 14 M70 x 2 steel zinc-plated with polyamid insert SKU: 65243300](https://maedler.in/product/locknut-guk-14-m70-x-2-steel-zinc-plated-with-polyamid-insert-sku-65243300/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 14a M70x1,5 steel zinc-plated SKU: 65243200K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-14a-m70x15-steel-zinc-plated-sku-65243200k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 14a M70 x 1,5 steel zinc-plated with polyamid insert SKU: 65243200](https://maedler.in/product/locknut-guk-14a-m70-x-15-steel-zinc-plated-with-polyamid-insert-sku-65243200/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 13 M65x2 steel zinc-plated SKU: 65243100K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-13-m65x2-steel-zinc-plated-sku-65243100k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 13 M65 x 2 steel zinc-plated with polyamid insert SKU: 65243100](https://maedler.in/product/locknut-guk-13-m65-x-2-steel-zinc-plated-with-polyamid-insert-sku-65243100/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 13a M65x1,5 steel zinc-plated SKU: 65243000K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-13a-m65x15-steel-zinc-plated-sku-65243000k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 13a M65 x 1,5 steel zinc-plated with polyamid insert SKU: 65243000](https://maedler.in/product/locknut-guk-13a-m65-x-15-steel-zinc-plated-with-polyamid-insert-sku-65243000/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 12 M60x2 steel zinc-plated SKU: 65242900K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-12-m60x2-steel-zinc-plated-sku-65242900k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 12 M60 x 2 steel zinc-plated with polyamid insert SKU: 65242900](https://maedler.in/product/locknut-guk-12-m60-x-2-steel-zinc-plated-with-polyamid-insert-sku-65242900/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 12a M60x1,5 steel zinc-plated SKU: 65242800K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-12a-m60x15-steel-zinc-plated-sku-65242800k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 12a M60 x 1,5 steel zinc-plated with polyamid insert SKU: 65242800](https://maedler.in/product/locknut-guk-12a-m60-x-15-steel-zinc-plated-with-polyamid-insert-sku-65242800/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 11 M55x2 steel zinc-plated SKU: 65242700K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-11-m55x2-steel-zinc-plated-sku-65242700k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 11 M55 x 2 steel zinc-plated with polyamid insert SKU: 65242700](https://maedler.in/product/locknut-guk-11-m55-x-2-steel-zinc-plated-with-polyamid-insert-sku-65242700/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 11a M55x1,5 steel zinc-plated SKU: 65242600K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-11a-m55x15-steel-zinc-plated-sku-65242600k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 11a M55 x 1,5 steel zinc-plated with polyamid insert SKU: 65242600](https://maedler.in/product/locknut-guk-11a-m55-x-15-steel-zinc-plated-with-polyamid-insert-sku-65242600/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [Locknut GUK 10a M52 x 1,5 steel zinc-plated with polyamid insert SKU: 65242500](https://maedler.in/product/locknut-guk-10a-m52-x-15-steel-zinc-plated-with-polyamid-insert-sku-65242500/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 10 M50x1,5 steel zinc-plated SKU: 65242400K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-10-m50x15-steel-zinc-plated-sku-65242400k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 10 M50 x 1,5 steel zinc-plated with polyamid insert SKU: 65242400](https://maedler.in/product/locknut-guk-10-m50-x-15-steel-zinc-plated-with-polyamid-insert-sku-65242400/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 9a M48x1,5 steel zinc-plated SKU: 65242300K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-9a-m48x15-steel-zinc-plated-sku-65242300k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 9a M48 x 1,5 steel zinc-plated with polyamid insert SKU: 65242300](https://maedler.in/product/locknut-guk-9a-m48-x-15-steel-zinc-plated-with-polyamid-insert-sku-65242300/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 9 M45x1,5 steel zinc-plated SKU: 65242200K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-9-m45x15-steel-zinc-plated-sku-65242200k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 9 M45 x 1,5 steel zinc-plated with polyamid insert SKU: 65242200](https://maedler.in/product/locknut-guk-9-m45-x-15-steel-zinc-plated-with-polyamid-insert-sku-65242200/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [Locknut GUK 8a M42 x 1,5 steel zinc-plated with polyamid insert SKU: 65242100](https://maedler.in/product/locknut-guk-8a-m42-x-15-steel-zinc-plated-with-polyamid-insert-sku-65242100/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 8 M40x1,5 steel zinc-plated SKU: 65242000K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-8-m40x15-steel-zinc-plated-sku-65242000k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 8 M40 x 1,5 steel zinc-plated with polyamid insert SKU: 65242000](https://maedler.in/product/locknut-guk-8-m40-x-15-steel-zinc-plated-with-polyamid-insert-sku-65242000/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 7a M38x1,5 steel zinc-plated SKU: 65241900K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-7a-m38x15-steel-zinc-plated-sku-65241900k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 7a M38 x 1,5 steel zinc-plated with polyamid insert SKU: 65241900](https://maedler.in/product/locknut-guk-7a-m38-x-15-steel-zinc-plated-with-polyamid-insert-sku-65241900/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 7 M35x1,5 steel zinc-plated SKU: 65241800K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-7-m35x15-steel-zinc-plated-sku-65241800k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 7 M35 x 1,5 steel zinc-plated with polyamid insert SKU: 65241800](https://maedler.in/product/locknut-guk-7-m35-x-15-steel-zinc-plated-with-polyamid-insert-sku-65241800/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 6a M32x1,5 steel zinc-plated SKU: 65241700K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-6a-m32x15-steel-zinc-plated-sku-65241700k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 6a M32 x 1,5 steel zinc-plated with polyamid insert SKU: 65241700](https://maedler.in/product/locknut-guk-6a-m32-x-15-steel-zinc-plated-with-polyamid-insert-sku-65241700/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 6 M30x1,5 steel zinc-plated SKU: 65241600K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-6-m30x15-steel-zinc-plated-sku-65241600k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 6 M30 x 1,5 steel zinc-plated with polyamid insert SKU: 65241600](https://maedler.in/product/locknut-guk-6-m30-x-15-steel-zinc-plated-with-polyamid-insert-sku-65241600/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 5a M28x1,5 steel zinc-plated SKU: 65241500K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-5a-m28x15-steel-zinc-plated-sku-65241500k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 5a M28 x 1,5 steel zinc-plated with polyamid insert SKU: 65241500](https://maedler.in/product/locknut-guk-5a-m28-x-15-steel-zinc-plated-with-polyamid-insert-sku-65241500/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 5 M25x1,5 steel zinc-plated SKU: 65241400K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-5-m25x15-steel-zinc-plated-sku-65241400k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 5 M25 x 1,5 steel zinc-plated with polyamid insert SKU: 65241400](https://maedler.in/product/locknut-guk-5-m25-x-15-steel-zinc-plated-with-polyamid-insert-sku-65241400/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 4c M24x1,5 steel zinc-plated SKU: 65241300K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-4c-m24x15-steel-zinc-plated-sku-65241300k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 4c M24 x 1,5 steel zinc-plated with polyamid insert SKU: 65241300](https://maedler.in/product/locknut-guk-4c-m24-x-15-steel-zinc-plated-with-polyamid-insert-sku-65241300/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 4b M22x1,5 steel zinc-plated SKU: 65241200K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-4b-m22x15-steel-zinc-plated-sku-65241200k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 4b M22 x 1,5 steel zinc-plated with polyamid insert SKU: 65241200](https://maedler.in/product/locknut-guk-4b-m22-x-15-steel-zinc-plated-with-polyamid-insert-sku-65241200/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 4a M20x1,5 steel zinc-plated SKU: 65241100K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-4a-m20x15-steel-zinc-plated-sku-65241100k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 4a M20 x 1,5 steel zinc-plated with polyamid insert SKU: 65241100](https://maedler.in/product/locknut-guk-4a-m20-x-15-steel-zinc-plated-with-polyamid-insert-sku-65241100/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 4 M20x1 steel zinc-plated SKU: 65241000K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-4-m20x1-steel-zinc-plated-sku-65241000k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 4 M20 x 1 steel zinc-plated with polyamid insert SKU: 65241000](https://maedler.in/product/locknut-guk-4-m20-x-1-steel-zinc-plated-with-polyamid-insert-sku-65241000/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [Locknut GUK 3a M18 x 1,5 steel zinc-plated with polyamid insert SKU: 65240900](https://maedler.in/product/locknut-guk-3a-m18-x-15-steel-zinc-plated-with-polyamid-insert-sku-65240900/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 3 M17x1 steel zinc-plated SKU: 65240800K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-3-m17x1-steel-zinc-plated-sku-65240800k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 3 M17 x 1 steel zinc-plated with polyamid insert SKU: 65240800](https://maedler.in/product/locknut-guk-3-m17-x-1-steel-zinc-plated-with-polyamid-insert-sku-65240800/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 2a M16x1,5 steel zinc-plated SKU: 65240700K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-2a-m16x15-steel-zinc-plated-sku-65240700k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 2a M16 x 1,5 steel zinc-plated with polyamid insert SKU: 65240700](https://maedler.in/product/locknut-guk-2a-m16-x-15-steel-zinc-plated-with-polyamid-insert-sku-65240700/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 2 M15x1 steel zinc-plated SKU: 65240600K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-2-m15x1-steel-zinc-plated-sku-65240600k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 2 M15 x 1 steel zinc-plated with polyamid insert SKU: 65240600](https://maedler.in/product/locknut-guk-2-m15-x-1-steel-zinc-plated-with-polyamid-insert-sku-65240600/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [Locknut GUK 1b M14 x 1,5 steel zinc-plated with polyamid insert SKU: 65240500](https://maedler.in/product/locknut-guk-1b-m14-x-15-steel-zinc-plated-with-polyamid-insert-sku-65240500/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 1a M12x1,5 steel zinc-plated SKU: 65240400K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-1a-m12x15-steel-zinc-plated-sku-65240400k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 1a M12 x 1,5 steel zinc-plated with polyamid insert SKU: 65240400](https://maedler.in/product/locknut-guk-1a-m12-x-15-steel-zinc-plated-with-polyamid-insert-sku-65240400/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 1 M12x1 steel zinc-plated SKU: 65240300K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-1-m12x1-steel-zinc-plated-sku-65240300k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 1 M12 x 1 steel zinc-plated with polyamid insert SKU: 65240300](https://maedler.in/product/locknut-guk-1-m12-x-1-steel-zinc-plated-with-polyamid-insert-sku-65240300/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 0a M10x1 steel zinc-plated SKU: 65240200K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-0a-m10x1-steel-zinc-plated-sku-65240200k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 0a M10 x 1 steel zinc-plated with polyamid insert SKU: 65240200](https://maedler.in/product/locknut-guk-0a-m10-x-1-steel-zinc-plated-with-polyamid-insert-sku-65240200/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMM splitted with clamp screw size 0 M10x0,75 steel zinc-plated SKU: 65240100K](https://maedler.in/product/locknut-kmm-splitted-with-clamp-screw-size-0-m10x075-steel-zinc-plated-sku-65240100k/): Material: Steel, zinc-plated, hardness class 14 H. Screw steel 12.9, zinc-plated.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 0 M10 x 0,75 steel zinc-plated with polyamid insert SKU: 65240100](https://maedler.in/product/locknut-guk-0-m10-x-075-steel-zinc-plated-with-polyamid-insert-sku-65240100/): Material: Steel, zinc-plated, hardness class 14 H. These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M30 left handed SKU: 65233000](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m30-left-handed-sku-65233000/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M24 left handed SKU: 65232400](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m24-left-handed-sku-65232400/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M20 left handed SKU: 65232000](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m20-left-handed-sku-65232000/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M16 left handed SKU: 65231600](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m16-left-handed-sku-65231600/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M12 left handed SKU: 65231200](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m12-left-handed-sku-65231200/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M10 left handed SKU: 65231000](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m10-left-handed-sku-65231000/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M8 left handed SKU: 65230800](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m8-left-handed-sku-65230800/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M6 left handed SKU: 65230600](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m6-left-handed-sku-65230600/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 steel strength 8 zinc-plated thread M5 left handed SKU: 65230500](https://maedler.in/product/hexagon-nut-din-934-steel-strength-8-zinc-plated-thread-m5-left-handed-sku-65230500/): Material: Steel, tensile strength 8, zinc-plated.Hexagon nuts according to the old standard DIN 934 with metric ISO thread, left-handed.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M36 steel zinc plated property class 10 SKU: 65223610](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m36-steel-zinc-plated-property-class-10-sku-65223610/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Hexagon nut DIN 985 (similar DIN EN ISO 10511) with polyamid insert M36 steel zinc plated property class 8 SKU: 65223608](https://maedler.in/product/hexagon-nut-din-985-similar-din-en-iso-10511-with-polyamid-insert-m36-steel-zinc-plated-property-class-8-sku-65223608/): Material:Steel, tensile strength 8, zinc-plated.Steel, tensile strength 10, zinc-plated.Self-locking hexagon nuts according to the old standard DIN 985 with metric ISO thread.The standard DIN 985 was replaced by DIN EN ISO 10511. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 985 are still used very often. - [Gearbox GE/I i=720:1 matching with motors 43040100 43040300 43040500 SKU: 43031501](https://maedler.in/product/gearbox-ge-i-i7201-matching-with-motors-43040100-43040300-43040500-sku-43031501/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=540:1 matching with motors 43040100 43040300 43040500 SKU: 43031401](https://maedler.in/product/gearbox-ge-i-i5401-matching-with-motors-43040100-43040300-43040500-sku-43031401/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=480:1 matching with motors 43040100 43040300 43040500 SKU: 43031301](https://maedler.in/product/gearbox-ge-i-i4801-matching-with-motors-43040100-43040300-43040500-sku-43031301/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=405:1 matching with motors 43040100 43040300 43040500 SKU: 43031201](https://maedler.in/product/gearbox-ge-i-i4051-matching-with-motors-43040100-43040300-43040500-sku-43031201/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=360:1 matching with motors 43040100 43040300 43040500 SKU: 43031101](https://maedler.in/product/gearbox-ge-i-i3601-matching-with-motors-43040100-43040300-43040500-sku-43031101/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=270:1 matching with motors 43040100 43040300 43040500 SKU: 43031001](https://maedler.in/product/gearbox-ge-i-i2701-matching-with-motors-43040100-43040300-43040500-sku-43031001/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=240:1 matching with motors 43040100 43040300 43040500 SKU: 43030901](https://maedler.in/product/gearbox-ge-i-i2401-matching-with-motors-43040100-43040300-43040500-sku-43030901/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=180:1 matching with motors 43040100 43040300 43040500 SKU: 43030801](https://maedler.in/product/gearbox-ge-i-i1801-matching-with-motors-43040100-43040300-43040500-sku-43030801/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=135:1 matching with motors 43040100 43040300 43040500 SKU: 43030701](https://maedler.in/product/gearbox-ge-i-i1351-matching-with-motors-43040100-43040300-43040500-sku-43030701/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=120:1 matching with motors 43040100 43040300 43040500 SKU: 43030601](https://maedler.in/product/gearbox-ge-i-i1201-matching-with-motors-43040100-43040300-43040500-sku-43030601/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=90:1 matching with motors 43040100 43040300 43040500 SKU: 43030501](https://maedler.in/product/gearbox-ge-i-i901-matching-with-motors-43040100-43040300-43040500-sku-43030501/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=60:1 matching with motors 43040100 43040300 43040500 SKU: 43030401](https://maedler.in/product/gearbox-ge-i-i601-matching-with-motors-43040100-43040300-43040500-sku-43030401/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=45:1 matching with motors 43040100 43040300 43040500 SKU: 43030301](https://maedler.in/product/gearbox-ge-i-i451-matching-with-motors-43040100-43040300-43040500-sku-43030301/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=30:1 matching with motors 43040100 43040300 43040500 SKU: 43030201](https://maedler.in/product/gearbox-ge-i-i301-matching-with-motors-43040100-43040300-43040500-sku-43030201/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=15:1 matching with motors 43040100 43040300 43040500 SKU: 43030101](https://maedler.in/product/gearbox-ge-i-i151-matching-with-motors-43040100-43040300-43040500-sku-43030101/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Worm gearbox ZM/I, type HL, size 80, i=43,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103314](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-80-i4301-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103314/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 80, i=72:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103313](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-80-i721-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103313/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 80, i=72:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103312](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-80-i721-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103312/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=82:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103311](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i821-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103311/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=62:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103310](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i621-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103310/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=53:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103309](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i531-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103309/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=40:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103308](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i401-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103308/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=30:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103307](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i301-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103307/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=26.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103306](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i26-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103306/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=20:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103305](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103305/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=15:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103304](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103304/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=13.25:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103303](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i13-251-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103303/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=10:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103302](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i101-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103302/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=7.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103301](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i7-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103301/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 80 i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103300](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-80-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103300/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1 product No. 42103313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 80, i=72:1 output flange side 6 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103127](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-80-i721-output-flange-side-6-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-421031/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 80, i=72:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103126](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-80-i721-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-421031/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 80, i=72:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103125](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-80-i721-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103125/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 80, i=72:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103124](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-80-i721-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103124/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=82:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103123](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i821-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103123/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=82:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103122](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i821-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103122/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=62:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103121](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i621-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103121/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=62:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103120](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i621-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103120/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=53:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103119](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i531-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103119/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=53:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103118](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i531-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103118/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=40:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103117](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i401-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103117/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=40:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103116](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i401-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103116/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=30:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103115](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i301-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103115/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=30:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103114](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i301-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103114/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=26.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103113](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i26-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103113/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=26.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103112](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i26-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103112/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=20:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103111](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i201-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103111/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=20:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103110](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i201-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103110/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=15:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103109](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i151-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103109/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=15:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103108](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i151-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103108/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=13.25:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103107](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i13-251-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103107/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=13.25:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103106](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i13-251-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103106/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=10:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103105](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i101-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103105/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=10:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103104](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i101-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103104/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=7.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103103](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i7-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103103/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=7.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103102](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i7-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103102/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103101](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103101/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 80 i=5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42103100](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-80-i51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42103100/): General data: Universal heavy-duty gearboxes. Centre distance 100 - 315 mm available on request. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42103126 is optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 63, i=40,0:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102314](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-63-i4001-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102314/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 63, i=72:1 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102313](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-63-i721-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102313/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type HL, size 63, i=72:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102312](https://maedler.in/product/worm-gearbox-zm-i-type-hl-size-63-i721-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102312/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=82:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102311](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i821-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102311/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=61.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102310](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i61-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102310/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=51.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102309](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i51-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102309/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=39.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102308](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i39-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102308/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=29.0:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102307](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i29-01-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102307/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=25.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102306](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i25-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102306/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=19.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102305](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i19-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102305/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=14.5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102304](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i14-51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102304/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=12.75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102303](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i12-751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102303/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=9.75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102302](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i9-751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102302/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=7.25:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102301](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i7-251-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102301/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version HL size 63 i=4.83:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102300](https://maedler.in/product/worm-gear-unit-zm-i-version-hl-size-63-i4-831-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102300/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42102314 and 72:1 product No. 42102313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 63, i=72:1 output flange side 6 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102127](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-63-i721-output-flange-side-6-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-421021/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 63, i=72:1 output flange side 5 optimized for manual operation (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102126](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-63-i721-output-flange-side-5-optimized-for-manual-operation-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-421021/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 63, i=72:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102125](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-63-i721-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102125/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gearbox ZM/I, type A, size 63, i=72:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102124](https://maedler.in/product/worm-gearbox-zm-i-type-a-size-63-i721-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102124/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=82.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102123](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i82-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102123/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=82.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102122](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i82-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102122/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=61.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102121](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i61-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102121/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=61.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102120](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i61-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102120/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=51.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102119](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i51-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102119/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=51.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102118](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i51-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102118/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=39.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102117](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i39-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102117/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=39.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102116](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i39-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102116/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=29.0:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102115](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i29-01-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102115/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=29.0:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102114](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i29-01-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102114/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=25.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102113](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i25-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102113/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=25.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102112](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i25-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102112/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=19.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102111](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i19-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102111/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=19.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102110](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i19-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102110/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=14.5:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102109](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i14-51-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102109/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=14.5:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102108](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i14-51-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102108/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=12.75:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102107](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i12-751-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102107/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=12.75:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102106](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i12-751-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102106/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=9.75:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102105](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i9-751-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102105/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=9.75:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102104](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i9-751-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102104/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=7.25:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102103](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i7-251-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102103/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=7.25:1 output flange side 5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102102](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i7-251-output-flange-side-5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102102/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102126 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Worm gear unit ZM/I version A size 63 i=4.83:1 output flange side 6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42102101](https://maedler.in/product/worm-gear-unit-zm-i-version-a-size-63-i4-831-output-flange-side-6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42102101/): General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor, depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only ratio 72 : 1 is generally self-locking. Product No. 42102127 is optimized for manual operation.Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: The sealing plug has to be exchanged with the separately packed venting filter. - [Locknut DIN 1804 type H M75x1.5 mating surface ground SKU: 65287500](https://maedler.in/product/locknut-din-1804-type-h-m75x1-5-mating-surface-ground-sku-65287500/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M72x1.5 mating surface ground SKU: 65287200](https://maedler.in/product/locknut-din-1804-type-h-m72x1-5-mating-surface-ground-sku-65287200/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M70x1.5 mating surface ground SKU: 65287000](https://maedler.in/product/locknut-din-1804-type-h-m70x1-5-mating-surface-ground-sku-65287000/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M68x1.5 mating surface ground SKU: 65286800](https://maedler.in/product/locknut-din-1804-type-h-m68x1-5-mating-surface-ground-sku-65286800/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M65x1.5 mating surface ground SKU: 65286500](https://maedler.in/product/locknut-din-1804-type-h-m65x1-5-mating-surface-ground-sku-65286500/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M62x1.5 mating surface ground SKU: 65286200](https://maedler.in/product/locknut-din-1804-type-h-m62x1-5-mating-surface-ground-sku-65286200/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M60x1.5 mating surface ground SKU: 65286000](https://maedler.in/product/locknut-din-1804-type-h-m60x1-5-mating-surface-ground-sku-65286000/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M58x1.5 mating surface ground SKU: 65285800](https://maedler.in/product/locknut-din-1804-type-h-m58x1-5-mating-surface-ground-sku-65285800/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M55x1.5 mating surface ground SKU: 65285500](https://maedler.in/product/locknut-din-1804-type-h-m55x1-5-mating-surface-ground-sku-65285500/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M52x1.5 mating surface ground SKU: 65285200](https://maedler.in/product/locknut-din-1804-type-h-m52x1-5-mating-surface-ground-sku-65285200/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M50x1.5 mating surface ground SKU: 65285000](https://maedler.in/product/locknut-din-1804-type-h-m50x1-5-mating-surface-ground-sku-65285000/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M48x1.5 mating surface ground SKU: 65284800](https://maedler.in/product/locknut-din-1804-type-h-m48x1-5-mating-surface-ground-sku-65284800/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M45x1.5 mating surface ground SKU: 65284500](https://maedler.in/product/locknut-din-1804-type-h-m45x1-5-mating-surface-ground-sku-65284500/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M42x1.5 mating surface ground SKU: 65284200](https://maedler.in/product/locknut-din-1804-type-h-m42x1-5-mating-surface-ground-sku-65284200/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M40x1.5 mating surface ground SKU: 65284000](https://maedler.in/product/locknut-din-1804-type-h-m40x1-5-mating-surface-ground-sku-65284000/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M38x1.5 mating surface ground SKU: 65283800](https://maedler.in/product/locknut-din-1804-type-h-m38x1-5-mating-surface-ground-sku-65283800/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M35x1.5 mating surface ground SKU: 65283500](https://maedler.in/product/locknut-din-1804-type-h-m35x1-5-mating-surface-ground-sku-65283500/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M32x1.5 mating surface ground SKU: 65283200](https://maedler.in/product/locknut-din-1804-type-h-m32x1-5-mating-surface-ground-sku-65283200/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M30x1.5 mating surface ground SKU: 65283000](https://maedler.in/product/locknut-din-1804-type-h-m30x1-5-mating-surface-ground-sku-65283000/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M28x1.5 mating surface ground SKU: 65282800](https://maedler.in/product/locknut-din-1804-type-h-m28x1-5-mating-surface-ground-sku-65282800/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M26x1.5 mating surface ground SKU: 65282600](https://maedler.in/product/locknut-din-1804-type-h-m26x1-5-mating-surface-ground-sku-65282600/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M24x1.5 mating surface ground SKU: 65282400](https://maedler.in/product/locknut-din-1804-type-h-m24x1-5-mating-surface-ground-sku-65282400/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M22x1.5 mating surface ground SKU: 65282200](https://maedler.in/product/locknut-din-1804-type-h-m22x1-5-mating-surface-ground-sku-65282200/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M20x1.5 mating surface ground SKU: 65282000](https://maedler.in/product/locknut-din-1804-type-h-m20x1-5-mating-surface-ground-sku-65282000/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M18x1.5 mating surface ground SKU: 65281800](https://maedler.in/product/locknut-din-1804-type-h-m18x1-5-mating-surface-ground-sku-65281800/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M16x1.5 mating surface ground SKU: 65281600](https://maedler.in/product/locknut-din-1804-type-h-m16x1-5-mating-surface-ground-sku-65281600/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M14x1.5 mating surface ground SKU: 65281400](https://maedler.in/product/locknut-din-1804-type-h-m14x1-5-mating-surface-ground-sku-65281400/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M12x1.5 mating surface ground SKU: 65281200](https://maedler.in/product/locknut-din-1804-type-h-m12x1-5-mating-surface-ground-sku-65281200/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M10x1 mating surface ground SKU: 65281000](https://maedler.in/product/locknut-din-1804-type-h-m10x1-mating-surface-ground-sku-65281000/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M8x1 mating surface ground SKU: 65280800](https://maedler.in/product/locknut-din-1804-type-h-m8x1-mating-surface-ground-sku-65280800/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Hexagon nut DIN 934 brass Ms60 thread M24 right handed SKU: 65272400](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m24-right-handed-sku-65272400/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 brass Ms60 thread M20 right handed SKU: 65272000](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m20-right-handed-sku-65272000/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 brass Ms60 thread M16 right handed SKU: 65271600](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m16-right-handed-sku-65271600/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 brass Ms60 thread M12 right handed SKU: 65271200](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m12-right-handed-sku-65271200/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 brass Ms60 thread M10 right handed SKU: 65271000](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m10-right-handed-sku-65271000/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 brass Ms60 thread M8 right handed SKU: 65270800](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m8-right-handed-sku-65270800/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 brass Ms60 thread M6 right handed SKU: 65270600](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m6-right-handed-sku-65270600/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 brass Ms60 thread M5 right handed SKU: 65270500](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m5-right-handed-sku-65270500/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 brass Ms60 thread M4 right handed SKU: 65270400](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m4-right-handed-sku-65270400/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Hexagon nut DIN 934 brass Ms60 thread M3 right handed SKU: 65270300](https://maedler.in/product/hexagon-nut-din-934-brass-ms60-thread-m3-right-handed-sku-65270300/): Material: Brass CuZn40 (Ms60).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Internal tab washer DIN 462 inner-ø 100mm plain steel SKU: 65269901](https://maedler.in/product/internal-tab-washer-din-462-inner-o-100mm-plain-steel-sku-65269901/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M100x2 black finishing SKU: 65269900](https://maedler.in/product/locknut-din-1804-type-w-m100x2-black-finishing-sku-65269900/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 95mm plain steel SKU: 65269501](https://maedler.in/product/internal-tab-washer-din-462-inner-o-95mm-plain-steel-sku-65269501/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M95x2 black finishing SKU: 65269500](https://maedler.in/product/locknut-din-1804-type-w-m95x2-black-finishing-sku-65269500/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type W M90x2 black finishing SKU: 65269000](https://maedler.in/product/locknut-din-1804-type-w-m90x2-black-finishing-sku-65269000/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 85mm plain steel SKU: 65268501](https://maedler.in/product/internal-tab-washer-din-462-inner-o-85mm-plain-steel-sku-65268501/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M85x2 black finishing SKU: 65268500](https://maedler.in/product/locknut-din-1804-type-w-m85x2-black-finishing-sku-65268500/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 80mm plain steel SKU: 65268001](https://maedler.in/product/internal-tab-washer-din-462-inner-o-80mm-plain-steel-sku-65268001/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M80x2 black finishing SKU: 65268000](https://maedler.in/product/locknut-din-1804-type-w-m80x2-black-finishing-sku-65268000/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 75mm plain steel SKU: 65267501](https://maedler.in/product/internal-tab-washer-din-462-inner-o-75mm-plain-steel-sku-65267501/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M75x1.5 black finishing SKU: 65267500](https://maedler.in/product/locknut-din-1804-type-w-m75x1-5-black-finishing-sku-65267500/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 72mm plain steel SKU: 65267201](https://maedler.in/product/internal-tab-washer-din-462-inner-o-72mm-plain-steel-sku-65267201/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M72x1.5 black finishing SKU: 65267200](https://maedler.in/product/locknut-din-1804-type-w-m72x1-5-black-finishing-sku-65267200/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 70mm plain steel SKU: 65267001](https://maedler.in/product/internal-tab-washer-din-462-inner-o-70mm-plain-steel-sku-65267001/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M70x1.5 black finishing SKU: 65267000](https://maedler.in/product/locknut-din-1804-type-w-m70x1-5-black-finishing-sku-65267000/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type W M68x1.5 black finishing SKU: 65266800](https://maedler.in/product/locknut-din-1804-type-w-m68x1-5-black-finishing-sku-65266800/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 65mm plain steel SKU: 65266501](https://maedler.in/product/internal-tab-washer-din-462-inner-o-65mm-plain-steel-sku-65266501/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M65x1.5 black finishing SKU: 65266500](https://maedler.in/product/locknut-din-1804-type-w-m65x1-5-black-finishing-sku-65266500/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 62mm plain steel SKU: 65266201](https://maedler.in/product/internal-tab-washer-din-462-inner-o-62mm-plain-steel-sku-65266201/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M62x1.5 black finishing SKU: 65266200](https://maedler.in/product/locknut-din-1804-type-w-m62x1-5-black-finishing-sku-65266200/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 60mm plain steel SKU: 65266001](https://maedler.in/product/internal-tab-washer-din-462-inner-o-60mm-plain-steel-sku-65266001/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M60x1.5 black finishing SKU: 65266000](https://maedler.in/product/locknut-din-1804-type-w-m60x1-5-black-finishing-sku-65266000/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 58mm plain steel SKU: 65265801](https://maedler.in/product/internal-tab-washer-din-462-inner-o-58mm-plain-steel-sku-65265801/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M58x1.5 black finishing SKU: 65265800](https://maedler.in/product/locknut-din-1804-type-w-m58x1-5-black-finishing-sku-65265800/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 55mm plain steel SKU: 65265501](https://maedler.in/product/internal-tab-washer-din-462-inner-o-55mm-plain-steel-sku-65265501/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M55x1.5 black finishing SKU: 65265500](https://maedler.in/product/locknut-din-1804-type-w-m55x1-5-black-finishing-sku-65265500/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 52mm plain steel SKU: 65265201](https://maedler.in/product/internal-tab-washer-din-462-inner-o-52mm-plain-steel-sku-65265201/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M52x1.5 black finishing SKU: 65265200](https://maedler.in/product/locknut-din-1804-type-w-m52x1-5-black-finishing-sku-65265200/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 50mm plain steel SKU: 65265001](https://maedler.in/product/internal-tab-washer-din-462-inner-o-50mm-plain-steel-sku-65265001/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M50x1.5 black finishing SKU: 65265000](https://maedler.in/product/locknut-din-1804-type-w-m50x1-5-black-finishing-sku-65265000/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 48mm plain steel SKU: 65264801](https://maedler.in/product/internal-tab-washer-din-462-inner-o-48mm-plain-steel-sku-65264801/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M48x1.5 black finishing SKU: 65264800](https://maedler.in/product/locknut-din-1804-type-w-m48x1-5-black-finishing-sku-65264800/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 45mm plain steel SKU: 65264501](https://maedler.in/product/internal-tab-washer-din-462-inner-o-45mm-plain-steel-sku-65264501/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M45x1.5 black finishing SKU: 65264500](https://maedler.in/product/locknut-din-1804-type-w-m45x1-5-black-finishing-sku-65264500/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 42mm plain steel SKU: 65264201](https://maedler.in/product/internal-tab-washer-din-462-inner-o-42mm-plain-steel-sku-65264201/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M42x1.5 black finishing SKU: 65264200](https://maedler.in/product/locknut-din-1804-type-w-m42x1-5-black-finishing-sku-65264200/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 40mm plain steel SKU: 65264001](https://maedler.in/product/internal-tab-washer-din-462-inner-o-40mm-plain-steel-sku-65264001/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M40x1.5 black finishing SKU: 65264000](https://maedler.in/product/locknut-din-1804-type-w-m40x1-5-black-finishing-sku-65264000/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 38mm plain steel SKU: 65263801](https://maedler.in/product/internal-tab-washer-din-462-inner-o-38mm-plain-steel-sku-65263801/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M38x1.5 black finishing SKU: 65263800](https://maedler.in/product/locknut-din-1804-type-w-m38x1-5-black-finishing-sku-65263800/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 35mm plain steel SKU: 65263501](https://maedler.in/product/internal-tab-washer-din-462-inner-o-35mm-plain-steel-sku-65263501/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M35x1.5 black finishing SKU: 65263500](https://maedler.in/product/locknut-din-1804-type-w-m35x1-5-black-finishing-sku-65263500/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 32mm plain steel SKU: 65263201](https://maedler.in/product/internal-tab-washer-din-462-inner-o-32mm-plain-steel-sku-65263201/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M32x1.5 black finishing SKU: 65263200](https://maedler.in/product/locknut-din-1804-type-w-m32x1-5-black-finishing-sku-65263200/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 30mm plain steel SKU: 65263001](https://maedler.in/product/internal-tab-washer-din-462-inner-o-30mm-plain-steel-sku-65263001/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M30x1.5 black finishing SKU: 65263000](https://maedler.in/product/locknut-din-1804-type-w-m30x1-5-black-finishing-sku-65263000/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 28mm plain steel SKU: 65262801](https://maedler.in/product/internal-tab-washer-din-462-inner-o-28mm-plain-steel-sku-65262801/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M28x1.5 black finishing SKU: 65262800](https://maedler.in/product/locknut-din-1804-type-w-m28x1-5-black-finishing-sku-65262800/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type W M26x1.5 black finishing SKU: 65262600](https://maedler.in/product/locknut-din-1804-type-w-m26x1-5-black-finishing-sku-65262600/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 24mm plain steel SKU: 65262401](https://maedler.in/product/internal-tab-washer-din-462-inner-o-24mm-plain-steel-sku-65262401/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M24x1.5 black finishing SKU: 65262400](https://maedler.in/product/locknut-din-1804-type-w-m24x1-5-black-finishing-sku-65262400/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 22mm plain steel SKU: 65262201](https://maedler.in/product/internal-tab-washer-din-462-inner-o-22mm-plain-steel-sku-65262201/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M22x1.5 black finishing SKU: 65262200](https://maedler.in/product/locknut-din-1804-type-w-m22x1-5-black-finishing-sku-65262200/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 20mm plain steel SKU: 65262001](https://maedler.in/product/internal-tab-washer-din-462-inner-o-20mm-plain-steel-sku-65262001/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M20x1.5 black finishing SKU: 65262000](https://maedler.in/product/locknut-din-1804-type-w-m20x1-5-black-finishing-sku-65262000/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 18mm plain steel SKU: 65261801](https://maedler.in/product/internal-tab-washer-din-462-inner-o-18mm-plain-steel-sku-65261801/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M18x1.5 black finishing SKU: 65261800](https://maedler.in/product/locknut-din-1804-type-w-m18x1-5-black-finishing-sku-65261800/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 16mm plain steel SKU: 65261601](https://maedler.in/product/internal-tab-washer-din-462-inner-o-16mm-plain-steel-sku-65261601/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Locknut DIN 1804 type W M16x1.5 black finishing SKU: 65261600](https://maedler.in/product/locknut-din-1804-type-w-m16x1-5-black-finishing-sku-65261600/): Material: steel, black oxide finish, unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Internal tab washer DIN 462 inner-ø 14mm plain steel SKU: 65261401](https://maedler.in/product/internal-tab-washer-din-462-inner-o-14mm-plain-steel-sku-65261401/): Material: Steel.Lockwashers (safety plates) for locknuts DIN 1804. A keyway is required on the shaft thread.After adjusting or fastening the nut, the sheet edge must be beaded into one slot of the nut. - [Worm geared motor HMD/I basic version gearbox size 063 n2=46.7 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805540](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n246-7-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=38.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805535](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n238-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=31.1 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805530](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n231-1-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=26.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805525](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n226-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=20.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805520](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n220-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=18.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805515](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n218-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=13.4 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805510](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n213-4-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=9.4 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805505](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n29-4-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Torque arm for worm geared motor HMD/I gearbox size 050 SKU: 43805500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-050-sku-43805500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 050 diameter 123mm overall height 47mm SKU: 43805400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-050-diameter-123mm-overall-height-47mm-sku-43805400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 050 width 113mm overall height 138.5mm SKU: 43805300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-050-width-113mm-overall-height-138-5mm-sku-43805300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 050 diameter 25mm overall length 200mm SKU: 43805200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-050-diameter-25mm-overall-length-200mm-sku-43805200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 050 diameter 25mm overall length 146mm SKU: 43805100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-050-diameter-25mm-overall-length-146mm-sku-43805100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Torque arm for worm geared motor HMD/I gearbox size 045 SKU: 43804500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-045-sku-43804500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 045 diameter 110mm overall height 2.,5mm SKU: 43804400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-045-diameter-110mm-overall-height-2-5mm-sku-43804400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 045 width 98mm overall height 121mm SKU: 43804300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-045-width-98mm-overall-height-121mm-sku-43804300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 045 diameter 18mm overall length 151mm SKU: 43804200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-045-diameter-18mm-overall-length-151mm-sku-43804200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 045 diameter 18mm overall length 113mm SKU: 43804100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-045-diameter-18mm-overall-length-113mm-sku-43804100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Worm geared motor HMD/I basic version gearbox size 045 n2=200 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803760](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2200-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=140 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803755](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2140-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=100 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803750](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2100-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=78 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803745](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n278-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=67 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803740](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n267-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=54 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803735](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n254-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=46.7 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803730](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n246-7-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=38.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803725](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n238-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=31.1 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803720](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n231-1-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=20.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803715](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n220-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=17.5 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803710](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n217-5-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=14.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43803705](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n214-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Torque arm for worm geared motor HMD/I gearbox size 030 SKU: 43803500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-030-sku-43803500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 030 diameter 80mm overall height 20.5mm SKU: 43803400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-030-diameter-80mm-overall-height-20-5mm-sku-43803400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 030 width 78mm overall height 94mm SKU: 43803300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-030-width-78mm-overall-height-94mm-sku-43803300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 030 diameter 14mm overall length 126mm SKU: 43803200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-030-diameter-14mm-overall-length-126mm-sku-43803200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 030 diameter 14mm overall length 94.5mm SKU: 43803100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-030-diameter-14mm-overall-length-94-5mm-sku-43803100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Worm geared motor HMD/I basic version gearbox size 045 n2=200 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802560](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2200-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=140 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802555](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2140-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=100 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802550](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2100-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=67 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802545](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n267-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=50 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802540](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n250-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=38.9 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802535](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n238-9-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=32.6 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802530](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n232-6-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=25 rpm 0.25kW 230/400V. 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802525](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n225-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=20.9 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802520](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n220-9-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=17.5 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802515](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n217-5-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=13.4 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802510](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n213-4-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=9.6 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43802505](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n29-6-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=200 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801855](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2200-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=140 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801850](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2140-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=100 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801845](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n2100-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=70 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801840](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n270-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=50 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801835](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n250-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=37.8 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801830](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n237-8-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=30.4 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801825](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n230-4-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=20.6 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801820](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n220-6-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=17.5 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801815](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n217-5-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=14 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801810](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n214-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=9.6 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801805](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n29-6-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=200 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801255](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2200-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=140 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801250](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2140-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=93 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801245](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n293-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=70 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801240](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n270-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=50 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801235](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n250-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=46.7 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801230](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n246-7-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=35 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801225](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n235-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=30.4 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801220](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n230-4-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=20.6 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801215](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n220-6-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=17.5 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801210](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n217-5-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=12.9 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43801205](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n212-9-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=200 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800955](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2200-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=140 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800950](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n2140-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=93 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800945](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n293-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=70 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800940](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n270-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=46.7 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800935](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n246-7-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=35 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800930](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n235-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 030 n2=23 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800925](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-030-n223-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=19.6 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800920](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n219-6-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=15 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800915](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n215-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 045 n2=12.9 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800910](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-045-n212-9-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=9 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43800905](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n29-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Operating capacitor KST 2.0µF 400V SKU: 43635200](https://maedler.in/product/operating-capacitor-kst-2-0%c2%b5f-400v-sku-43635200/): Aluminium housing, metal-polypropylene. For 30.000 operating hours. According to VDE. 2.0 µF. The capacitors have a protective cap made from aluminium and a 180mm cable connected on the side. On the bottom there is a mounting screw with toothed lock washer and nut. Technical Data: Capacity tolerance ±10%. Frequency 50 to 60 Hz. Voltage 400 V. Loss < 0.3%. Temperature range -25 to +85°C. Insulation test voltage (2 Sec.) 2.5 kV (to ground). - [DC motor 24V matching with gearbox GE/I SKU: 43040500](https://maedler.in/product/dc-motor-24v-matching-with-gearbox-ge-i-sku-43040500/): DC motor for 12 Volt or 24 Volt. Pinion pressed onto motor shaft. Free lead ends. Sense of rotation can be changed by swopping leads over. Please realize: The gearbox has to be ordered seperately. - [DC motor 12V matching with gearbox GE/I SKU: 43040300](https://maedler.in/product/dc-motor-12v-matching-with-gearbox-ge-i-sku-43040300/): DC motor for 12 Volt or 24 Volt. Pinion pressed onto motor shaft. Free lead ends. Sense of rotation can be changed by swopping leads over. Please realize: The gearbox has to be ordered seperately. - [Capacitor motor 230V 50Hz matching with gearbox GE/I without capacitor SKU: 43040100](https://maedler.in/product/capacitor-motor-230v-50hz-matching-with-gearbox-ge-i-without-capacitor-sku-43040100/): For 230 V, 50 Hz, direction of rotation reversible. Pinion milled into motor shaft. The cable gland of the terminal box can be moved 4 x 90°. Please note: At continuous operation the motor heats up to 70°C. Please realize: The gearbox and capacitor have to be ordered seperately. - [Gearbox GE/I i=9720:1 matching with motors 43040100 43040300 43040500 SKU: 43033101](https://maedler.in/product/gearbox-ge-i-i97201-matching-with-motors-43040100-43040300-43040500-sku-43033101/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=8640:1 matching with motors 43040100 43040300 43040500 SKU: 43033001](https://maedler.in/product/gearbox-ge-i-i86401-matching-with-motors-43040100-43040300-43040500-sku-43033001/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=7290:1 matching with motors 43040100 43040300 43040500 SKU: 43032901](https://maedler.in/product/gearbox-ge-i-i72901-matching-with-motors-43040100-43040300-43040500-sku-43032901/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=6480:1 matching with motors 43040100 43040300 43040500 SKU: 43032801](https://maedler.in/product/gearbox-ge-i-i64801-matching-with-motors-43040100-43040300-43040500-sku-43032801/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=4860:1 matching with motors 43040100 43040300 43040500 SKU: 43032701](https://maedler.in/product/gearbox-ge-i-i48601-matching-with-motors-43040100-43040300-43040500-sku-43032701/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=4320:1 matching with motors 43040100 43040300 43040500 SKU: 43032601](https://maedler.in/product/gearbox-ge-i-i43201-matching-with-motors-43040100-43040300-43040500-sku-43032601/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=3645:1 matching with motors 43040100 43040300 43040500 SKU: 43032501](https://maedler.in/product/gearbox-ge-i-i36451-matching-with-motors-43040100-43040300-43040500-sku-43032501/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=3240:1 matching with motors 43040100 43040300 43040500 SKU: 43032401](https://maedler.in/product/gearbox-ge-i-i32401-matching-with-motors-43040100-43040300-43040500-sku-43032401/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: Sintered bronze slide bearing. Lubrication: Maintenance-free grease lubrication. Please realize: The motor and capacitor have to be ordered seperately. Ordering details: e.g.: Type, Product No. 430 401 00 Capacitor Motor Product No. 430 301 01 Gearbox 15:1 Product No. 436 352 00 Operating Capacitor - [Gearbox GE/I i=2430:1 matching with motors 43040100 43040300 43040500 SKU: 43032301](https://maedler.in/product/gearbox-ge-i-i24301-matching-with-motors-43040100-43040300-43040500-sku-43032301/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=2160:1 matching with motors 43040100 43040300 43040500 SKU: 43032201](https://maedler.in/product/gearbox-ge-i-i21601-matching-with-motors-43040100-43040300-43040500-sku-43032201/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=1620:1 matching with motors 43040100 43040300 43040500 SKU: 43032101](https://maedler.in/product/gearbox-ge-i-i16201-matching-with-motors-43040100-43040300-43040500-sku-43032101/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=1440:1 matching with motors 43040100 43040300 43040500 SKU: 43032001](https://maedler.in/product/gearbox-ge-i-i14401-matching-with-motors-43040100-43040300-43040500-sku-43032001/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=1215:1 matching with motors 43040100 43040300 43040500 SKU: 43031901](https://maedler.in/product/gearbox-ge-i-i12151-matching-with-motors-43040100-43040300-43040500-sku-43031901/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=1080:1 matching with motors 43040100 43040300 43040500 SKU: 43031801](https://maedler.in/product/gearbox-ge-i-i10801-matching-with-motors-43040100-43040300-43040500-sku-43031801/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=960:1 matching with motors 43040100 43040300 43040500 SKU: 43031701](https://maedler.in/product/gearbox-ge-i-i9601-matching-with-motors-43040100-43040300-43040500-sku-43031701/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Gearbox GE/I i=810:1 matching with motors 43040100 43040300 43040500 SKU: 43031601](https://maedler.in/product/gearbox-ge-i-i8101-matching-with-motors-43040100-43040300-43040500-sku-43031601/): General data: Light model range, extremely high ratios. Housing: Aluminium die-cast, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearing: Depending on the arrangement of the gear stages milled from high-grade platic or steel. Bearing system: sintered bronze slide bearing. Lubrication: Maintenance free grease lubrication. Please realize: The motor has to be ordered seperately. Ordering details: e.g.: Type, Product No. DC Motor Product No. Gearbox - [Hexagon nut DIN 6330 steel strength 10 thread M36 right hand SKU: 65323600](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m36-right-hand-sku-65323600/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Hexagon nut DIN 6330 steel strength 10 thread M30 right hand SKU: 65323000](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m30-right-hand-sku-65323000/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Hexagon nut DIN 6330 steel strength 10 thread M24 right hand SKU: 65322400](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m24-right-hand-sku-65322400/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Hexagon nut DIN 6330 steel strength 10 thread M20 right hand SKU: 65322000](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m20-right-hand-sku-65322000/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Hexagon nut DIN 6330 steel strength 10 thread M16 right hand SKU: 65321600](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m16-right-hand-sku-65321600/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Hexagon nut DIN 6330 steel strength 10 thread M14 right hand SKU: 65321400](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m14-right-hand-sku-65321400/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Hexagon nut DIN 6330 steel strength 10 thread M12 right hand SKU: 65321200](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m12-right-hand-sku-65321200/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Hexagon nut DIN 6330 steel strength 10 thread M10 right hand SKU: 65321000](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m10-right-hand-sku-65321000/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Hexagon nut DIN 6330 steel strength 10 thread M8 right hand SKU: 65320800](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m8-right-hand-sku-65320800/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Hexagon nut DIN 6330 steel strength 10 thread M6 right hand SKU: 65320600](https://maedler.in/product/hexagon-nut-din-6330-steel-strength-10-thread-m6-right-hand-sku-65320600/): Material: Heat-treated steel, tensile strength 10, shape B. With round contact surface at one end. The round end matches the spherical washers DIN 6319. This combination can be used to compensate bearing displacement. - [Extension nut DIN 6334 steel strength 10 thread M30 right hand height 90mm SKU: 65303000](https://maedler.in/product/extension-nut-din-6334-steel-strength-10-thread-m30-right-hand-height-90mm-sku-65303000/): Material: Heat-treated steel. Strength class 10. - [Extension nut DIN 6334 steel strength 10 thread M24 right hand height 72mm SKU: 65302400](https://maedler.in/product/extension-nut-din-6334-steel-strength-10-thread-m24-right-hand-height-72mm-sku-65302400/): Material: Heat-treated steel. Strength class 10. - [Extension nut DIN 6334 steel strength 10 thread M20 right hand height 60mm SKU: 65302000](https://maedler.in/product/extension-nut-din-6334-steel-strength-10-thread-m20-right-hand-height-60mm-sku-65302000/): Material: Heat-treated steel. Strength class 10. - [Extension nut DIN 6334 steel strength 10 thread M16 right hand height 48mm SKU: 65301600](https://maedler.in/product/extension-nut-din-6334-steel-strength-10-thread-m16-right-hand-height-48mm-sku-65301600/): Material: Heat-treated steel. Strength class 10. - [Extension nut DIN 6334 steel strength 10 thread M14 right hand height 42mm SKU: 65301400](https://maedler.in/product/extension-nut-din-6334-steel-strength-10-thread-m14-right-hand-height-42mm-sku-65301400/): Material: Heat-treated steel. Strength class 10. - [Extension nut DIN 6334 steel strength 10 thread M12 right hand height 36mm SKU: 65301200](https://maedler.in/product/extension-nut-din-6334-steel-strength-10-thread-m12-right-hand-height-36mm-sku-65301200/): Material: Heat-treated steel. Strength class 10. - [Extension nut DIN 6334 steel strength 10 thread M10 right hand height 30mm SKU: 65301000](https://maedler.in/product/extension-nut-din-6334-steel-strength-10-thread-m10-right-hand-height-30mm-sku-65301000/): Material: Heat-treated steel. Strength class 10. - [Extension nut DIN 6334 steel strength 10 thread M8 right hand height 24mm SKU: 65300800](https://maedler.in/product/extension-nut-din-6334-steel-strength-10-thread-m8-right-hand-height-24mm-sku-65300800/): Material: Heat-treated steel. Strength class 10. - [Extension nut DIN 6334 steel strength 10 thread M6 right hand height 18mm SKU: 65300600](https://maedler.in/product/extension-nut-din-6334-steel-strength-10-thread-m6-right-hand-height-18mm-sku-65300600/): Material: Heat-treated steel. Strength class 10. - [Locknut DIN 1804 type RF M70x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299670](https://maedler.in/product/locknut-din-1804-type-rf-m70x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299670/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M65x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299665](https://maedler.in/product/locknut-din-1804-type-rf-m65x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299665/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M60x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299660](https://maedler.in/product/locknut-din-1804-type-rf-m60x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299660/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M55x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299655](https://maedler.in/product/locknut-din-1804-type-rf-m55x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299655/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M50x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299650](https://maedler.in/product/locknut-din-1804-type-rf-m50x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299650/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M48x1,5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299648](https://maedler.in/product/locknut-din-1804-type-rf-m48x15-stainless-steel-1-4301-aisi304-not-hardened-sku-65299648/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M45x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299645](https://maedler.in/product/locknut-din-1804-type-rf-m45x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299645/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M40x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299640](https://maedler.in/product/locknut-din-1804-type-rf-m40x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299640/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M38x1,5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299638](https://maedler.in/product/locknut-din-1804-type-rf-m38x15-stainless-steel-1-4301-aisi304-not-hardened-sku-65299638/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M35x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299635](https://maedler.in/product/locknut-din-1804-type-rf-m35x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299635/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M32x1,5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299632](https://maedler.in/product/locknut-din-1804-type-rf-m32x15-stainless-steel-1-4301-aisi304-not-hardened-sku-65299632/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M30x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299630](https://maedler.in/product/locknut-din-1804-type-rf-m30x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299630/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M28x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299628](https://maedler.in/product/locknut-din-1804-type-rf-m28x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299628/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M24x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299624](https://maedler.in/product/locknut-din-1804-type-rf-m24x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299624/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M20x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299620](https://maedler.in/product/locknut-din-1804-type-rf-m20x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299620/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M16x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299616](https://maedler.in/product/locknut-din-1804-type-rf-m16x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299616/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M12x1.5 stainless steel 1.4301 (AISI304) not hardened SKU: 65299612](https://maedler.in/product/locknut-din-1804-type-rf-m12x1-5-stainless-steel-1-4301-aisi304-not-hardened-sku-65299612/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type RF M10x1 stainless steel 1.4301 (AISI304) not hardened SKU: 65299610](https://maedler.in/product/locknut-din-1804-type-rf-m10x1-stainless-steel-1-4301-aisi304-not-hardened-sku-65299610/): Material: Stainless steel 1.4301 (AISI 304), unhardened, unground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [locknut KMMR splitted with clamp screw size 12a M60x1,5 Material stainless steel SKU: 65299428K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-12a-m60x15-material-stainless-steel-sku-65299428k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [locknut KMMR splitted with clamp screw size 11a M55x1,5 Material stainless steel SKU: 65299426K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-11a-m55x15-material-stainless-steel-sku-65299426k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [locknut KMMR splitted with clamp screw size 10 M50x1,5 Material stainless steel SKU: 65299424K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-10-m50x15-material-stainless-steel-sku-65299424k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 10 M50 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299424](https://maedler.in/product/locknut-guk-10-m50-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299424/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 9a M48x1,5 Material stainless steel SKU: 65299423K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-9a-m48x15-material-stainless-steel-sku-65299423k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 9a M48 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299423](https://maedler.in/product/locknut-guk-9a-m48-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299423/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 9 M45x1,5 Material stainless steel SKU: 65299422K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-9-m45x15-material-stainless-steel-sku-65299422k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 9 M45 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299422](https://maedler.in/product/locknut-guk-9-m45-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299422/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 8 M40x1,5 Material stainless steel SKU: 65299420K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-8-m40x15-material-stainless-steel-sku-65299420k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 8 M40 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299420](https://maedler.in/product/locknut-guk-8-m40-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299420/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 7a M38x1,5 Material stainless steel SKU: 65299419K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-7a-m38x15-material-stainless-steel-sku-65299419k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 7a M38 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299419](https://maedler.in/product/locknut-guk-7a-m38-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299419/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 7 M35x1,5 Material stainless steel SKU: 65299418K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-7-m35x15-material-stainless-steel-sku-65299418k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 7 M35 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299418](https://maedler.in/product/locknut-guk-7-m35-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299418/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 6a M32x1,5 Material stainless steel SKU: 65299417K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-6a-m32x15-material-stainless-steel-sku-65299417k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 6a M32 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299417](https://maedler.in/product/locknut-guk-6a-m32-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299417/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 6 M30x1,5 Material stainless steel SKU: 65299416K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-6-m30x15-material-stainless-steel-sku-65299416k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 6 M30 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299416](https://maedler.in/product/locknut-guk-6-m30-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299416/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 5a M28x1,5 Material stainless steel SKU: 65299415K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-5a-m28x15-material-stainless-steel-sku-65299415k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [locknut KMMR splitted with clamp screw size 5 M25x1,5 Material stainless steel SKU: 65299414K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-5-m25x15-material-stainless-steel-sku-65299414k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 5 M25 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299414](https://maedler.in/product/locknut-guk-5-m25-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299414/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 4c M24x1,5 Material stainless steel SKU: 65299413K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-4c-m24x15-material-stainless-steel-sku-65299413k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 4c M24 x 1,5 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299413](https://maedler.in/product/locknut-guk-4c-m24-x-15-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299413/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 4a M20x1,5 Material stainless steel SKU: 65299411K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-4a-m20x15-material-stainless-steel-sku-65299411k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [locknut KMMR splitted with clamp screw size 4 M20x1 Material stainless steel SKU: 65299410K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-4-m20x1-material-stainless-steel-sku-65299410k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 4 M20 x 1 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299410](https://maedler.in/product/locknut-guk-4-m20-x-1-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299410/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 3 M17x1 Material stainless steel SKU: 65299408K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-3-m17x1-material-stainless-steel-sku-65299408k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 3 M17 x 1 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299408](https://maedler.in/product/locknut-guk-3-m17-x-1-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299408/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 2a M16x1,5 Material stainless steel SKU: 65299407K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-2a-m16x15-material-stainless-steel-sku-65299407k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [locknut KMMR splitted with clamp screw size 2 M15x1 Material stainless steel SKU: 65299406K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-2-m15x1-material-stainless-steel-sku-65299406k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 2 M15 x 1 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299406](https://maedler.in/product/locknut-guk-2-m15-x-1-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299406/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 1a M12x1,5 Material stainless steel SKU: 65299404K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-1a-m12x15-material-stainless-steel-sku-65299404k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [locknut KMMR splitted with clamp screw size 1 M12x1 Material stainless steel SKU: 65299403K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-1-m12x1-material-stainless-steel-sku-65299403k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 1 M12 x 1 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299403](https://maedler.in/product/locknut-guk-1-m12-x-1-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299403/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 0a M10x1 Material stainless steel SKU: 65299402K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-0a-m10x1-material-stainless-steel-sku-65299402k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 0a M10 x 1 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299402](https://maedler.in/product/locknut-guk-0a-m10-x-1-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299402/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [locknut KMMR splitted with clamp screw size 0 M10x0,75 Material stainless steel SKU: 65299401K](https://maedler.in/product/locknut-kmmr-splitted-with-clamp-screw-size-0-m10x075-material-stainless-steel-sku-65299401k/): Material: Stainless steel 1.4301 (AISI 304). Screw stainless steel A2-70.Shaft nuts with 4 slots, with clamp slot and clamp screw. With metric fine thread. They are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1.Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut GUK 0 M10 x 0,75 stainless steel 1.4301 (AISI304) with polyamid insert SKU: 65299401](https://maedler.in/product/locknut-guk-0-m10-x-075-stainless-steel-1-4301-aisi304-with-polyamid-insert-sku-65299401/): Material: Stainless steel 1.4301 (AISI 304). These self-locking slot nuts with metric fine thread are used for fixing bearings or as adjusting nuts. The threads are like locknuts DIN 981 respectively DIN 1804. Please note the pitch, specified in the thread size d1. Recommend tolerance for the shaft thread: 6g DIN ISO 965. Temperature max. 100°C. - [nut DIN 934 A4 M36 RH SKU: 65299136](https://maedler.in/product/nut-din-934-a4-m36-rh-sku-65299136/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A4 M30 RH SKU: 65299130](https://maedler.in/product/nut-din-934-a4-m30-rh-sku-65299130/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A4 M24 RH SKU: 65299124](https://maedler.in/product/nut-din-934-a4-m24-rh-sku-65299124/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A4 M20 RH SKU: 65299120](https://maedler.in/product/nut-din-934-a4-m20-rh-sku-65299120/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A4 M16 RH SKU: 65299116](https://maedler.in/product/nut-din-934-a4-m16-rh-sku-65299116/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A4 M12 RH SKU: 65299112](https://maedler.in/product/nut-din-934-a4-m12-rh-sku-65299112/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A4 M10 RH SKU: 65299110](https://maedler.in/product/nut-din-934-a4-m10-rh-sku-65299110/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A4 M8 RH SKU: 65299108](https://maedler.in/product/nut-din-934-a4-m8-rh-sku-65299108/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M36 RH SKU: 65299036](https://maedler.in/product/nut-din-934-a2-m36-rh-sku-65299036/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M30 RH SKU: 65299030](https://maedler.in/product/nut-din-934-a2-m30-rh-sku-65299030/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M24 RH SKU: 65299024](https://maedler.in/product/nut-din-934-a2-m24-rh-sku-65299024/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M20 RH SKU: 65299020](https://maedler.in/product/nut-din-934-a2-m20-rh-sku-65299020/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M16 RH SKU: 65299016](https://maedler.in/product/nut-din-934-a2-m16-rh-sku-65299016/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M12 RH SKU: 65299012](https://maedler.in/product/nut-din-934-a2-m12-rh-sku-65299012/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M10 RH SKU: 65299010](https://maedler.in/product/nut-din-934-a2-m10-rh-sku-65299010/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M8 RH SKU: 65299008](https://maedler.in/product/nut-din-934-a2-m8-rh-sku-65299008/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M6 RH SKU: 65299006](https://maedler.in/product/nut-din-934-a2-m6-rh-sku-65299006/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M5 RH SKU: 65299005](https://maedler.in/product/nut-din-934-a2-m5-rh-sku-65299005/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M4 RH SKU: 65299004](https://maedler.in/product/nut-din-934-a2-m4-rh-sku-65299004/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [nut DIN 934 A2 M3 RH SKU: 65299003](https://maedler.in/product/nut-din-934-a2-m3-rh-sku-65299003/): Material: Stainless steel V2A (A2) or V4A (A4).Hexagon nuts according to the old standard DIN 934 with metric ISO thread.The standard DIN 934 was replaced by DIN EN ISO 4032 / 8673. Some of these nuts have different outer dimensions (width across flats and height). But the nuts DIN 934 are still used very often. - [Locknut DIN 1804 type H M100x2 mating surface ground SKU: 65289900](https://maedler.in/product/locknut-din-1804-type-h-m100x2-mating-surface-ground-sku-65289900/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M95x2 mating surface ground SKU: 65289500](https://maedler.in/product/locknut-din-1804-type-h-m95x2-mating-surface-ground-sku-65289500/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M90x2 mating surface ground SKU: 65289000](https://maedler.in/product/locknut-din-1804-type-h-m90x2-mating-surface-ground-sku-65289000/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M85x2 mating surface ground SKU: 65288500](https://maedler.in/product/locknut-din-1804-type-h-m85x2-mating-surface-ground-sku-65288500/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Locknut DIN 1804 type H M80x2 mating surface ground SKU: 65288000](https://maedler.in/product/locknut-din-1804-type-h-m80x2-mating-surface-ground-sku-65288000/): Material: steel hardened with the exeption of the thread, faces ground.At these nuts, the stepped face with Ø d3 shall always be used as the bearing face.From size M45x1.5, the nuts have 6 slots. - [Worm geared motor HMD/II basic version gearbox size 063 n2=17.5 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903710](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n217-5-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=14.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903705](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n214-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Torque support for worm gear motor HMD/II gearbox size 030 SKU: 43903500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-030-sku-43903500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Square shaped output flange for worm gear motor HMD/II gearbox size 030 SKU: 43903300](https://maedler.in/product/square-shaped-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-030-sku-43903300/): Material: Aluminium. Square flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 033 00, Output-Side Flange, 70 x 70 mm - [Worm geared motor HMD/II basic version gearbox size 045 n2=200 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902560](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2200-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=140 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902555](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2140-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=100 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902550](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2100-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=67 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902545](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n267-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=50 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902540](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n250-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=38.9 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902535](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n238-9-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=32.6 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902530](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n232-6-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=25 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902525](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n225-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=20.9 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902520](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n220-9-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=17.5 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902515](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n217-5-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=13.4 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902510](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n213-4-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=9.6 rpm 0.25kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43902505](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n29-6-rpm-0-25kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=200 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901855](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2200-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=140 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901850](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2140-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=100 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901845](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2100-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=70 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901840](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n270-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=50 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901835](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n250-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=37.8 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901830](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n237-8-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=30.4 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901825](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n230-4-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=20.6 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901820](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n220-6-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=17.5 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901815](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n217-5-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=14 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901810](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n214-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=9.6 rpm 0.18kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901805](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n29-6-rpm-0-18kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=200 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901255](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2200-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=140 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901250](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2140-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=93 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901245](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n293-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=70 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901240](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n270-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=50 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901235](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n250-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=46.7 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901230](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n246-7-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=35 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901225](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n235-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=30.4 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901220](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n230-4-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=20.6 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901215](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n220-6-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=17.5 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901210](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n217-5-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=12.9 rpm 0.12kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43901205](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n212-9-rpm-0-12kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=200 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900955](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2200-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=140 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900950](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n2140-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=93 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900945](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n293-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=70 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900940](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n270-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=46.7 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900935](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n246-7-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=35 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900930](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n235-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 030 n2=23 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900925](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-030-n223-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=19.6 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900920](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n219-6-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=15 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900915](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n215-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=12.9 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900910](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n212-9-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=9 rpm 0.09kW 230/400V 50Hz IE1 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43900905](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n29-rpm-0-09kw-230-400v-50hz-ie1-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/I basic version gearbox size 085 n2=204 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811555](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n2204-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=143 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811550](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n2143-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=102 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811545](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n2102-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=95 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811540](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n295-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=75 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811535](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n275-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=72 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811530](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n272-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=65 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811525](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n265-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=51 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811520](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n251-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=37.6 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811515](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n237-6-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=31.1 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811510](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n231-1-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=27.5 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811505](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n227-5-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=144 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811070](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n2144-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=103 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811065](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n2103-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=96 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811060](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n296-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=76 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811055](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n276-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=65 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811050](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n265-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=60 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811045](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n260-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=51 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811040](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n251-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=48.0 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811035](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n248-0-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=40.0 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811030](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n240-0-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=37.9 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811025](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n237-9-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=31.3 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811020](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n231-3-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=27.7 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811015](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n227-7-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=21.5 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811010](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n221-5-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=19.5 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43811005](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n219-5-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Torque arm for worm geared motor HMD/I gearbox size 085 SKU: 43808500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-085-sku-43808500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 085 diameter 205mm overall height 40mm SKU: 43808400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-085-diameter-205mm-overall-height-40mm-sku-43808400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 085 width 180mm overall height 236.5mm SKU: 43808300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-085-width-180mm-overall-height-236-5mm-sku-43808300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 085 diameter 35mm overall length 282mm SKU: 43808200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-085-diameter-35mm-overall-length-282mm-sku-43808200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 085 diameter 35mm overall length 214mm SKU: 43808100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-085-diameter-35mm-overall-length-214mm-sku-43808100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Worm geared motor HMD/I basic version gearbox size 050 n2=144 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807560](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n2144-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 050 n2=103 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807555](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n2103-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=96 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807550](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n296-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=76 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807545](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n276-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=60 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807540](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n260-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=48.0 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807535](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n248-0-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=37.9 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807530](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n237-9-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=31.3 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807525](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n231-3-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=27.7 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807520](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n227-7-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=21.5 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807515](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n221-5-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=19.5 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807510](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n219-5-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 085 n2=15.0 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43807505](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-085-n215-0-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Torque arm for worm geared motor HMD/I gearbox size 063 SKU: 43806500](https://maedler.in/product/torque-arm-for-worm-geared-motor-hmd-i-gearbox-size-063-sku-43806500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/I. The position can be changed in steps of 90° (size 063 in steps of 45°). Ordering Details: e.g.: Product No. 438 035 00, Torque Arm, Gearbox Size 030 - [Output flange for worm geared motor HMD/I gearbox size 063 diameter 175mm overall height 41mm SKU: 43806400](https://maedler.in/product/output-flange-for-worm-geared-motor-hmd-i-gearbox-size-063-diameter-175mm-overall-height-41mm-sku-43806400/): Material: Aluminium. Retrofit kit: Flange B5 with mounting screws, for geared motor HMD/I. - [Foot mounting for worm geared motor HMD/I gearbox size 063 width 133mm overall height 170mm SKU: 43806300](https://maedler.in/product/foot-mounting-for-worm-geared-motor-hmd-i-gearbox-size-063-width-133mm-overall-height-170mm-sku-43806300/): Material: Steel sheet, zinc plated. Retrofit kit: Foot mounting for geared motor HMD/I. The position of the feet can be changed by 4x90° (Size 063: 8x 45°). 8 mounting screws are included in the delivery (4 screws per side). - [Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 063 diameter 25mm, overall length 246,4mm SKU: 43806200](https://maedler.in/product/output-shaft-double-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-063-diameter-25mm-overall-length-2464mm-sku-43806200/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Output shaft single-sided for worm geared motor HMD/I and HMD/II gearbox size 063 diameter 25mm overall length 190mm SKU: 43806100](https://maedler.in/product/output-shaft-single-sided-for-worm-geared-motor-hmd-i-and-hmd-ii-gearbox-size-063-diameter-25mm-overall-length-190mm-sku-43806100/): Material: Steel. To change the gearboxes HMD/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. - [Worm geared motor HMD/I basic version gearbox size 050 n2=140 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805560](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-050-n2140-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=93 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805555](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n293-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=74 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805550](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n274-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Worm geared motor HMD/I basic version gearbox size 063 n2=58 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43805545](https://maedler.in/product/worm-geared-motor-hmd-i-basic-version-gearbox-size-063-n258-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Housing: Aluminium, corrosion-inhibited coating, with mounting holes for flexible foot and flange mounting. Worm shaft: Hardened and ground. Worm gear: Bronze on grey cast iron hub. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance-free, geared motors without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push-in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product number and have to be ordered separately. Variable mounting: The geared motors are supplied without foot mounting. The foot mounting, which has to be ordered separately, can however easily be screwed on, if a foot mounting is required. The position of the foot can be changed for different mounting positions. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately. - [Locknut with integral locking device KMK 17 M85x2 SKU: 65357600](https://maedler.in/product/locknut-with-integral-locking-device-kmk-17-m85x2-sku-65357600/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 15 M75x2 SKU: 65357400](https://maedler.in/product/locknut-with-integral-locking-device-kmk-15-m75x2-sku-65357400/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 14 M70x2 SKU: 65357300](https://maedler.in/product/locknut-with-integral-locking-device-kmk-14-m70x2-sku-65357300/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 12 M60x2 SKU: 65357100](https://maedler.in/product/locknut-with-integral-locking-device-kmk-12-m60x2-sku-65357100/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 11 M55x2 SKU: 65356800](https://maedler.in/product/locknut-with-integral-locking-device-kmk-11-m55x2-sku-65356800/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 10 M50x1.5 SKU: 65356500](https://maedler.in/product/locknut-with-integral-locking-device-kmk-10-m50x1-5-sku-65356500/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 9 M45x1.5 SKU: 65356200](https://maedler.in/product/locknut-with-integral-locking-device-kmk-9-m45x1-5-sku-65356200/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 8 M40x1.5 SKU: 65355800](https://maedler.in/product/locknut-with-integral-locking-device-kmk-8-m40x1-5-sku-65355800/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 7 M35x1.5 SKU: 65355300](https://maedler.in/product/locknut-with-integral-locking-device-kmk-7-m35x1-5-sku-65355300/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 6 M30x1.5 SKU: 65354800](https://maedler.in/product/locknut-with-integral-locking-device-kmk-6-m30x1-5-sku-65354800/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 5 M25x1.5 SKU: 65354400](https://maedler.in/product/locknut-with-integral-locking-device-kmk-5-m25x1-5-sku-65354400/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 4 M20x1 SKU: 65354000](https://maedler.in/product/locknut-with-integral-locking-device-kmk-4-m20x1-sku-65354000/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 3 M17x1 SKU: 65353700](https://maedler.in/product/locknut-with-integral-locking-device-kmk-3-m17x1-sku-65353700/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 2 M15x1 SKU: 65353400](https://maedler.in/product/locknut-with-integral-locking-device-kmk-2-m15x1-sku-65353400/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 1 M12x1 SKU: 65353200](https://maedler.in/product/locknut-with-integral-locking-device-kmk-1-m12x1-sku-65353200/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut with integral locking device KMK 0 M10x0.75 SKU: 65353000](https://maedler.in/product/locknut-with-integral-locking-device-kmk-0-m10x0-75-sku-65353000/): Material: Body of the nut from steel, min. strength 350 N/mm2. Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut DIN 70852 M95x1,5 SKU: 65352900](https://maedler.in/product/locknut-din-70852-m95x15-sku-65352900/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M90x1,5 SKU: 65352800](https://maedler.in/product/locknut-din-70852-m90x15-sku-65352800/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M85x1,5 SKU: 65352700](https://maedler.in/product/locknut-din-70852-m85x15-sku-65352700/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M80x1,5 SKU: 65352600](https://maedler.in/product/locknut-din-70852-m80x15-sku-65352600/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M75x1,5 SKU: 65352500](https://maedler.in/product/locknut-din-70852-m75x15-sku-65352500/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M70x1,5 SKU: 65352400](https://maedler.in/product/locknut-din-70852-m70x15-sku-65352400/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M65x1,5 SKU: 65352300](https://maedler.in/product/locknut-din-70852-m65x15-sku-65352300/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M60x1,5 SKU: 65352200](https://maedler.in/product/locknut-din-70852-m60x15-sku-65352200/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M55x1,5 SKU: 65352100](https://maedler.in/product/locknut-din-70852-m55x15-sku-65352100/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M52x1,5 SKU: 65352000](https://maedler.in/product/locknut-din-70852-m52x15-sku-65352000/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M50x1,5 SKU: 65351900](https://maedler.in/product/locknut-din-70852-m50x15-sku-65351900/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M48x1,5 SKU: 65351800](https://maedler.in/product/locknut-din-70852-m48x15-sku-65351800/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M45x1,5 SKU: 65351700](https://maedler.in/product/locknut-din-70852-m45x15-sku-65351700/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M42x1,5 SKU: 65351600](https://maedler.in/product/locknut-din-70852-m42x15-sku-65351600/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M40x1,5 SKU: 65351500](https://maedler.in/product/locknut-din-70852-m40x15-sku-65351500/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M38x1,5 SKU: 65351400](https://maedler.in/product/locknut-din-70852-m38x15-sku-65351400/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M35x1,5 SKU: 65351300](https://maedler.in/product/locknut-din-70852-m35x15-sku-65351300/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M32x1,5 SKU: 65351200](https://maedler.in/product/locknut-din-70852-m32x15-sku-65351200/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M30x1,5 SKU: 65351100](https://maedler.in/product/locknut-din-70852-m30x15-sku-65351100/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M28x1,5 SKU: 65351000](https://maedler.in/product/locknut-din-70852-m28x15-sku-65351000/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M26x1,5 SKU: 65350900](https://maedler.in/product/locknut-din-70852-m26x15-sku-65350900/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M24x1,5 SKU: 65350800](https://maedler.in/product/locknut-din-70852-m24x15-sku-65350800/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M22x1,5 SKU: 65350700](https://maedler.in/product/locknut-din-70852-m22x15-sku-65350700/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M20x1,5 SKU: 65350600](https://maedler.in/product/locknut-din-70852-m20x15-sku-65350600/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M18x1,5 SKU: 65350500](https://maedler.in/product/locknut-din-70852-m18x15-sku-65350500/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M16x1,5 SKU: 65350400](https://maedler.in/product/locknut-din-70852-m16x15-sku-65350400/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M14x1,5 SKU: 65350300](https://maedler.in/product/locknut-din-70852-m14x15-sku-65350300/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M12x1,5 SKU: 65350200](https://maedler.in/product/locknut-din-70852-m12x15-sku-65350200/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M10x1 SKU: 65350100](https://maedler.in/product/locknut-din-70852-m10x1-sku-65350100/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M100x1,5 SKU: 65350000](https://maedler.in/product/locknut-din-70852-m100x15-sku-65350000/): Material: Steel. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut UW with integrated threadlocker thread M100x2 SKU: 65349900](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m100x2-sku-65349900/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M95x2 SKU: 65349500](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m95x2-sku-65349500/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M90x2 SKU: 65349000](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m90x2-sku-65349000/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M85x2 SKU: 65348500](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m85x2-sku-65348500/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M80x2 SKU: 65348000](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m80x2-sku-65348000/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M75x2 SKU: 65347500](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m75x2-sku-65347500/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M70x2 SKU: 65347300](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m70x2-sku-65347300/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M65x2 SKU: 65347200](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m65x2-sku-65347200/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M60x2 SKU: 65347100](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m60x2-sku-65347100/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M55x2 SKU: 65346800](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m55x2-sku-65346800/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M50x1.5 SKU: 65346500](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m50x1-5-sku-65346500/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M45x1.5 SKU: 65346200](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m45x1-5-sku-65346200/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M40x1.5 SKU: 65345800](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m40x1-5-sku-65345800/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M35x1.5 SKU: 65345300](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m35x1-5-sku-65345300/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M30x1.5 SKU: 65344800](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m30x1-5-sku-65344800/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M25x1.5 SKU: 65344400](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m25x1-5-sku-65344400/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M20x1 SKU: 65344000](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m20x1-sku-65344000/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M17x1 SKU: 65343700](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m17x1-sku-65343700/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M15x1 SKU: 65343400](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m15x1-sku-65343400/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M12x1 SKU: 65343200](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m12x1-sku-65343200/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M10x0.75 SKU: 65343000](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m10x0-75-sku-65343000/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integrated threadlocker thread M8x0.75 SKU: 65342800](https://maedler.in/product/locknut-uw-with-integrated-threadlocker-thread-m8x0-75-sku-65342800/): Material: Body of the nut: steel, min. strength 350N/mm2. Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 135-145mm steel black oxide finished SKU: 65340135](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-135-145mm-steel-black-oxide-finished-sku-65340135/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 120-130mm steel black oxide finished SKU: 65340120](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-120-130mm-steel-black-oxide-finished-sku-65340120/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 110-115mm steel black oxide finished SKU: 65340110](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-110-115mm-steel-black-oxide-finished-sku-65340110/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 95-100mm steel black oxide finished SKU: 65340095](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-95-100mm-steel-black-oxide-finished-sku-65340095/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 80-90mm steel black oxide finished SKU: 65340080](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-80-90mm-steel-black-oxide-finished-sku-65340080/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 68-75mm steel black oxide finished SKU: 65340068](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-68-75mm-steel-black-oxide-finished-sku-65340068/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 58-62mm steel black oxide finished SKU: 65340058](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-58-62mm-steel-black-oxide-finished-sku-65340058/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 52-55mm steel black oxide finished SKU: 65340052](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-52-55mm-steel-black-oxide-finished-sku-65340052/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 45-50mm steel black oxide finished SKU: 65340045](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-45-50mm-steel-black-oxide-finished-sku-65340045/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 40-42mm steel black oxide finished SKU: 65340040](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-40-42mm-steel-black-oxide-finished-sku-65340040/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 38-45mm steel black oxide finished SKU: 65340038](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-38-45mm-steel-black-oxide-finished-sku-65340038/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 34-36mm steel black oxide finished SKU: 65340034](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-34-36mm-steel-black-oxide-finished-sku-65340034/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 30-32mm steel black oxide finished SKU: 65340030](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-30-32mm-steel-black-oxide-finished-sku-65340030/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 25-28mm steel black oxide finished SKU: 65340025](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-25-28mm-steel-black-oxide-finished-sku-65340025/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 16-20mm steel black oxide finished SKU: 65340016](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-16-20mm-steel-black-oxide-finished-sku-65340016/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hook wrench for nuts DIN 981 / DIN 1804 diameter range 12-14mm steel black oxide finished SKU: 65340012](https://maedler.in/product/hook-wrench-for-nuts-din-981-din-1804-diameter-range-12-14mm-steel-black-oxide-finished-sku-65340012/): Material: High grade tool steel, black oxide finish.Hook wrenches for locknuts DIN 981, slotted nuts DIN 1804 and other products.Please note: For some applications like mounting the precision levelling adjusters, there are two wrenches required. - [Hexagon nut 2308 with ball cup thread M30 steel strength 10 black oxide finished SKU: 65338000](https://maedler.in/product/hexagon-nut-2308-with-ball-cup-thread-m30-steel-strength-10-black-oxide-finished-sku-65338000/): Material: Heat-treated steel, tensile strength 10, black oxide finish. - [Hexagon nut 2308 with ball cup thread M24 steel strength 10 black oxide finished SKU: 65337400](https://maedler.in/product/hexagon-nut-2308-with-ball-cup-thread-m24-steel-strength-10-black-oxide-finished-sku-65337400/): Material: Heat-treated steel, tensile strength 10, black oxide finish. - [Hexagon nut 2308 with ball cup thread M20 steel strength 10 black oxide finished SKU: 65337000](https://maedler.in/product/hexagon-nut-2308-with-ball-cup-thread-m20-steel-strength-10-black-oxide-finished-sku-65337000/): Material: Heat-treated steel, tensile strength 10, black oxide finish. - [Hexagon nut 2308 with ball cup thread M16 steel strength 10 black oxide finished SKU: 65336600](https://maedler.in/product/hexagon-nut-2308-with-ball-cup-thread-m16-steel-strength-10-black-oxide-finished-sku-65336600/): Material: Heat-treated steel, tensile strength 10, black oxide finish. - [Hexagon nut 2308 with ball cup thread M12 steel strength 10 black oxide finished SKU: 65336200](https://maedler.in/product/hexagon-nut-2308-with-ball-cup-thread-m12-steel-strength-10-black-oxide-finished-sku-65336200/): Material: Heat-treated steel, tensile strength 10, black oxide finish. - [Hexagon nut 2308 with ball cup thread M10 steel strength 10 black oxide finished SKU: 65336000](https://maedler.in/product/hexagon-nut-2308-with-ball-cup-thread-m10-steel-strength-10-black-oxide-finished-sku-65336000/): Material: Heat-treated steel, tensile strength 10, black oxide finish. - [Hexagon nut 2308 with ball cup thread M8 steel strength 10 black oxide finished SKU: 65335800](https://maedler.in/product/hexagon-nut-2308-with-ball-cup-thread-m8-steel-strength-10-black-oxide-finished-sku-65335800/): Material: Heat-treated steel, tensile strength 10, black oxide finish. - [Hexagon nut DIN 6331 with collar steel strength 10 thread M36 right hand SKU: 65333600](https://maedler.in/product/hexagon-nut-din-6331-with-collar-steel-strength-10-thread-m36-right-hand-sku-65333600/): Material: Heat-treated steel, tensile strength 10. The collar on the nut means no separate washer is required. - [Hexagon nut DIN 6331 with collar steel strength 10 thread M30 right hand SKU: 65333000](https://maedler.in/product/hexagon-nut-din-6331-with-collar-steel-strength-10-thread-m30-right-hand-sku-65333000/): Material: Heat-treated steel, tensile strength 10. The collar on the nut means no separate washer is required. - [Hexagon nut DIN 6331 with collar steel strength 10 thread M24 right hand SKU: 65332400](https://maedler.in/product/hexagon-nut-din-6331-with-collar-steel-strength-10-thread-m24-right-hand-sku-65332400/): Material: Heat-treated steel, tensile strength 10. The collar on the nut means no separate washer is required. - [Hexagon nut DIN 6331 with collar steel strength 10 thread M20 right hand SKU: 65332000](https://maedler.in/product/hexagon-nut-din-6331-with-collar-steel-strength-10-thread-m20-right-hand-sku-65332000/): Material: Heat-treated steel, tensile strength 10. The collar on the nut means no separate washer is required. - [Hexagon nut DIN 6331 with collar steel strength 10 thread M16 right hand SKU: 65331600](https://maedler.in/product/hexagon-nut-din-6331-with-collar-steel-strength-10-thread-m16-right-hand-sku-65331600/): Material: Heat-treated steel, tensile strength 10. The collar on the nut means no separate washer is required. - [Hexagon nut DIN 6331 with collar steel strength 10 thread M14 right hand SKU: 65331400](https://maedler.in/product/hexagon-nut-din-6331-with-collar-steel-strength-10-thread-m14-right-hand-sku-65331400/): Material: Heat-treated steel, tensile strength 10. The collar on the nut means no separate washer is required. - [Hexagon nut DIN 6331 with collar steel strength 10 thread M12 right hand SKU: 65331200](https://maedler.in/product/hexagon-nut-din-6331-with-collar-steel-strength-10-thread-m12-right-hand-sku-65331200/): Material: Heat-treated steel, tensile strength 10. The collar on the nut means no separate washer is required. - [Hexagon nut DIN 6331 with collar steel strength 10 thread M10 right hand SKU: 65331000](https://maedler.in/product/hexagon-nut-din-6331-with-collar-steel-strength-10-thread-m10-right-hand-sku-65331000/): Material: Heat-treated steel, tensile strength 10. The collar on the nut means no separate washer is required. - [Hexagon nut DIN 6331 with collar steel strength 10 thread M8 right hand SKU: 65330800](https://maedler.in/product/hexagon-nut-din-6331-with-collar-steel-strength-10-thread-m8-right-hand-sku-65330800/): Material: Heat-treated steel, tensile strength 10. The collar on the nut means no separate washer is required. - [Sliding hub FA size 4 torque adjustable 90-600 Nm outer diameter 140 mm max. bore: 55mm SKU: 61210400](https://maedler.in/product/sliding-hub-fa-size-4-torque-adjustable-90-600-nm-outer-diameter-140-mm-max-bore-55mm-sku-61210400/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 3 72x115x4mm SKU: 61210301](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-3-72x115x4mm-sku-61210301/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 3 torque adjustable 50-300 Nm outer diameter 115 mm max. bore: 45mm SKU: 61210300](https://maedler.in/product/sliding-hub-fa-size-3-torque-adjustable-50-300-nm-outer-diameter-115-mm-max-bore-45mm-sku-61210300/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA and FA-K size 2 58x88x3mm SKU: 61210201](https://maedler.in/product/friction-disc-for-sliding-hub-fa-and-fa-k-size-2-58x88x3mm-sku-61210201/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 2 torque adjustable 25-140 Nm outer diameter 88 mm max. bore: 35mm SKU: 61210200](https://maedler.in/product/sliding-hub-fa-size-2-torque-adjustable-25-140-nm-outer-diameter-88-mm-max-bore-35mm-sku-61210200/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA and FA-K size 1 44x68x3mm SKU: 61210111](https://maedler.in/product/friction-disc-for-sliding-hub-fa-and-fa-k-size-1-44x68x3mm-sku-61210111/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 1 torque adjustable 20-75 Nm outer diameter 68 mm max. bore: 25mm SKU: 61210110](https://maedler.in/product/sliding-hub-fa-size-1-torque-adjustable-20-75-nm-outer-diameter-68-mm-max-bore-25mm-sku-61210110/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA and FA-K size 01 40x58x3mm SKU: 61210101](https://maedler.in/product/friction-disc-for-sliding-hub-fa-and-fa-k-size-01-40x58x3mm-sku-61210101/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 01 torque adjustable 5-35 Nm outer diameter 58 mm max. bore: 22mm SKU: 61210100](https://maedler.in/product/sliding-hub-fa-size-01-torque-adjustable-5-35-nm-outer-diameter-58-mm-max-bore-22mm-sku-61210100/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA and FA-K size 0 35x45x2.5mm SKU: 61210011](https://maedler.in/product/friction-disc-for-sliding-hub-fa-and-fa-k-size-0-35x45x2-5mm-sku-61210011/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 0 torque adjustable 2-10 Nm outer diameter 45 mm max. bore: 20mm SKU: 61210010](https://maedler.in/product/sliding-hub-fa-size-0-torque-adjustable-2-10-nm-outer-diameter-45-mm-max-bore-20mm-sku-61210010/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 00 16x30x2.5mm SKU: 61210001](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-00-16x30x2-5mm-sku-61210001/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 00 torque adjustable 0.5-5 Nm outer diameter 30mm max. bore: 10mm SKU: 61210000](https://maedler.in/product/sliding-hub-fa-size-00-torque-adjustable-0-5-5-nm-outer-diameter-30mm-max-bore-10mm-sku-61210000/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Sliding hub FS torque adjustable 230-1360 Nm with pilot bore 24H8 outer diameter 178mm max. bore: 60mm bush length 20.6mm SKU: 61208000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-230-1360-nm-with-pilot-bore-24h8-outer-diameter-178mm-max-bore-60mm-bush-length-20-6mm-sku-61208000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 612070-612080 SKU: 61207500](https://maedler.in/product/friction-disc-for-sliding-hub-fs-612070-612080-sku-61207500/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 115-690 Nm with pilot bore 24H8 outer diameter 178mm max. bore: 60mm bush length 20.6mm SKU: 61207000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-115-690-nm-with-pilot-bore-24h8-outer-diameter-178mm-max-bore-60mm-bush-length-20-6mm-sku-61207000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 100-600 Nm with pilot bore 19H8 outer diameter 127mm max. bore 40mm bush length 16mm SKU: 61206000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-100-600-nm-with-pilot-bore-19h8-outer-diameter-127mm-max-bore-40mm-bush-length-16mm-sku-61206000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 612050-612060 SKU: 61205500](https://maedler.in/product/friction-disc-for-sliding-hub-fs-612050-612060-sku-61205500/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 50-300 Nm with pilot bore 19H8 outer diameter 127mm max. bore: 40mm bush length 16mm SKU: 61205000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-50-300-nm-with-pilot-bore-19h8-outer-diameter-127mm-max-bore-40mm-bush-length-16mm-sku-61205000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 40-180 Nm with pilot bore 13H8 outer diameter 90mm max. bore: 25mm bush length 13.7mm SKU: 61204000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-40-180-nm-with-pilot-bore-13h8-outer-diameter-90mm-max-bore-25mm-bush-length-13-7mm-sku-61204000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 612030-612040 SKU: 61203500](https://maedler.in/product/friction-disc-for-sliding-hub-fs-612030-612040-sku-61203500/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 20-90 Nm with pilot bore 13H8 outer diameter 90mm max. bore: 25mm bush length 13.7mm SKU: 61203000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-20-90-nm-with-pilot-bore-13h8-outer-diameter-90mm-max-bore-25mm-bush-length-13-7mm-sku-61203000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 14-68 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm SKU: 61202000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-14-68-nm-with-pilot-bore-10h8-outer-diameter-64mm-max-bore-22mm-bush-length-10-3mm-sku-61202000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 612010-612020 SKU: 61201500](https://maedler.in/product/friction-disc-for-sliding-hub-fs-612010-612020-sku-61201500/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 7-34 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm SKU: 61201000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-7-34-nm-with-pilot-bore-10h8-outer-diameter-64mm-max-bore-22mm-bush-length-10-3mm-sku-61201000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 61200500-61200600 SKU: 61200700](https://maedler.in/product/friction-disc-for-sliding-hub-fs-61200500-61200600-sku-61200700/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 4-20 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm lock washer without edges SKU: 61200600](https://maedler.in/product/sliding-hub-fs-torque-adjustable-4-20-nm-with-pilot-bore-outer-diameter-45mm-max-bore-20mm-bush-length-4-2mm-lock-washer-without-edges-sku-61200600/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 2-10 Nm with pilot bore outer diameter 45mm max. bore: 20mm bush length 4.2mm lock washer without edges SKU: 61200500](https://maedler.in/product/sliding-hub-fs-torque-adjustable-2-10-nm-with-pilot-bore-outer-diameter-45mm-max-bore-20mm-bush-length-4-2mm-lock-washer-without-edges-sku-61200500/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Friction disc for sliding hub FS 61200000-61200100 SKU: 61200300](https://maedler.in/product/friction-disc-for-sliding-hub-fs-61200000-61200100-sku-61200300/): Delivery per piece. For each hub, there are 2 pieces required. - [Sliding hub FS torque adjustable 1-10 Nm with pilot bore outer diameter 30mm with 4 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges SKU: 61200100](https://maedler.in/product/sliding-hub-fs-torque-adjustable-1-10-nm-with-pilot-bore-outer-diameter-30mm-with-4-disc-springs-max-bore-10mm-bush-length-4-2mm-lock-washer-without-edges-sku-61200100/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Sliding hub FS torque adjustable 0.5-5 Nm with pilot bore outer diameter 30mm with 2 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges SKU: 61200000](https://maedler.in/product/sliding-hub-fs-torque-adjustable-0-5-5-nm-with-pilot-bore-outer-diameter-30mm-with-2-disc-springs-max-bore-10mm-bush-length-4-2mm-lock-washer-without-edges-sku-61200000/): Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges. - [Worm geared motor HMD/II basic version gearbox size 063 n2=143 rpm 1.5kW, 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915050](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n2143-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=102 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915045](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n2102-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=95 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915040](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n295-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=75 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915035](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n275-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=72 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915030](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n272-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=65 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915025](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n265-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=51 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915020](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n251-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=37.6 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915015](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n237-6-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=31.1 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915010](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n231-1-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=27.5 rpm 1.5kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43915005](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n227-5-rpm-1-5kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=144 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911070](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n2144-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=103 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911065](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n2103-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=96 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911060](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n296-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=76 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911055](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n276-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=65 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911050](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n265-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=60 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911045](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n260-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=51 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911040](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n251-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websit/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=48,0 rpm, 1,1kW, 230/400V, 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911035](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n2480-rpm-11kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=40.0 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911030](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n240-0-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=37,9 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911025](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n2379-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=31.3 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911020](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n231-3-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=27.7 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911015](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n227-7-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=21.5 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911010](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n221-5-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=19.5 rpm 1.1kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43911005](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n219-5-rpm-1-1kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Torque support for worm gear motor HMD/II gearbox size 085 SKU: 43908500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-085-sku-43908500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Round output flange for worm gear motor HMD/II gearbox size 085 SKU: 43908400](https://maedler.in/product/round-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-085-sku-43908400/): Material: Aluminium. Round flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 044 00, Output-Side Flange, Ø 140 mm. - [Worm geared motor HMD/II basic version gearbox size 050 n2=144 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907560](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n2144-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=103 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907555](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n2103-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=96 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907550](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n296-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=76 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907545](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n276-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=60 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907540](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n260-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=48.0 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907535](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n248-0-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=37.9 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907530](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n237-9-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=33.3 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907525](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n233-3-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=27.7 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907520](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n227-7-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=21.5 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907515](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n221-5-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=19.5 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907510](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n219-5-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=15.0 rpm 0.75kW 230/400V 50Hz IE3 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43907505](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n215-0-rpm-0-75kw-230-400v-50hz-ie3-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Torque support for worm gear motor HMD/II gearbox size 063 SKU: 43906500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-063-sku-43906500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Round output flange for worm gear motor HMD/II gearbox size 063 SKU: 43906400](https://maedler.in/product/round-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-063-sku-43906400/): Material: Aluminium. Round flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 044 00, Output-Side Flange, Ø 140 mm. - [Square shaped output flange for worm gear motor HMD/II gearbox size 063 SKU: 43906300](https://maedler.in/product/square-shaped-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-063-sku-43906300/): Material: Aluminium. Square flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 033 00, Output-Side Flange, 70 x 70 mm - [Worm geared motor HMD/II basic version gearbox size 050 n2=140 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905560](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n2140-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=93 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905555](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n293-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=74 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905550](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n274-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=58 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905545](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n258-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=46.7 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905540](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n246-7-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=38.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905535](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n238-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=31.1 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905530](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n231-1-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=26.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905525](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n226-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=20.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905520](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n220-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=18.9 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905515](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n218-9-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=13.4 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905510](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n213-4-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 085 n2=9.4 rpm 0.55kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43905505](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-085-n29-4-rpm-0-55kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Torque support for worm gear motor HMD/II gearbox size 050 SKU: 43905500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-050-sku-43905500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Round output flange for worm gear motor HMD/II gearbox size 050 SKU: 43905400](https://maedler.in/product/round-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-050-sku-43905400/): Material: Aluminium. Round flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 044 00, Output-Side Flange, Ø 140 mm. - [Square shaped output flange for worm gear motor HMD/II gearbox size 050 SKU: 43905300](https://maedler.in/product/square-shaped-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-050-sku-43905300/): Material: Aluminium. Square flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 033 00, Output-Side Flange, 70 x 70 mm - [Torque support for worm gear motor HMD/II gearbox size 045 SKU: 43904500](https://maedler.in/product/torque-support-for-worm-gear-motor-hmd-ii-gearbox-size-045-sku-43904500/): Material:Steel sheet, zinc plated. Torque arm with mounting screws for retrofitting, for geared motor HMD/II. The position can be changed in steps of 90°. Ordering Details: e.g.: Product No. 439 035 00, Torque Arm, Gearbox Size 030 - [Round output flange for worm gear motor HMD/II gearbox size 045 SKU: 43904400](https://maedler.in/product/round-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-045-sku-43904400/): Material: Aluminium. Round flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 044 00, Output-Side Flange, Ø 140 mm. - [Square shaped output flange for worm gear motor HMD/II gearbox size 045 SKU: 43904300](https://maedler.in/product/square-shaped-output-flange-for-worm-gear-motor-hmd-ii-gearbox-size-045-sku-43904300/): Material: Aluminium. Square flange with fixing screws for retrofitting, for geared motor HMD/II. Ordering Details: e.g.: Product No. 439 033 00, Output-Side Flange, 70 x 70 mm - [Worm geared motor HMD/II basic version gearbox size 045 n2=200 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903760](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2200-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=140 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903755](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2140-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=100 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903750](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n2100-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-webs/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=78 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903745](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n278-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 045 n2=67 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903740](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-045-n267-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 050 n2=54 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903735](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-050-n254-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-websi/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=46.7 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903730](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n246-7-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=38.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903725](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n238-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=31.1 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903720](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n231-1-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Worm geared motor HMD/II basic version gearbox size 063 n2=20.9 rpm 0.37kW 230/400V 50Hz IE2 output hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43903715](https://maedler.in/product/worm-geared-motor-hmd-ii-basic-version-gearbox-size-063-n220-9-rpm-0-37kw-230-400v-50hz-ie2-output-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-web/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for flexible foot and flange mounting. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50Hz. Other motor versions (AC motor, posistor, forced ventilation, brake etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Lightweight, high quality model range. These maintenance-free geared motors, without ventilation can be used in any mounting position. The mounting positions V5 and V6 (worm shaft vertical) are however not recommended for continuous operation. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. Variable mounting: The gearboxes are supplied with mounting holes onall sides. Retrofittable flange: If an output-side flange mounting is required, this flange can easily be mounted by the customer. These flanges have their own product number and have to be ordered separately (Flange type, either square or round). - [Lockwasher DIN 5406 MB 33 zinc plated inner diameter 165mm SKU: 65365481](https://maedler.in/product/lockwasher-din-5406-mb-33-zinc-plated-inner-diameter-165mm-sku-65365481/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 33 inner diameter 165mm SKU: 65365401](https://maedler.in/product/lockwasher-din-5406-mb-33-inner-diameter-165mm-sku-65365401/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 33 thread M165x3 SKU: 65365400](https://maedler.in/product/locknut-din-981-km-33-thread-m165x3-sku-65365400/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB7 zinc plated inner diameter 35mm SKU: 65365381](https://maedler.in/product/lockwasher-din-5406-mb7-zinc-plated-inner-diameter-35mm-sku-65365381/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 7 inner diameter 35mm SKU: 65365301](https://maedler.in/product/lockwasher-din-5406-type-mb-7-inner-diameter-35mm-sku-65365301/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 7 thread M35x1.5 SKU: 65365300](https://maedler.in/product/locknut-din-981-km-7-thread-m35x1-5-sku-65365300/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 32 zinc plated inner diameter 160mm SKU: 65365281](https://maedler.in/product/lockwasher-din-5406-mb-32-zinc-plated-inner-diameter-160mm-sku-65365281/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 32 inner diameter 160mm SKU: 65365201](https://maedler.in/product/lockwasher-din-5406-mb-32-inner-diameter-160mm-sku-65365201/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 32 thread M160x3 SKU: 65365200](https://maedler.in/product/locknut-din-981-km-32-thread-m160x3-sku-65365200/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 31 zinc plated inner diameter 155mm SKU: 65365181](https://maedler.in/product/lockwasher-din-5406-mb-31-zinc-plated-inner-diameter-155mm-sku-65365181/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 31 inner diameter 155mm SKU: 65365101](https://maedler.in/product/lockwasher-din-5406-mb-31-inner-diameter-155mm-sku-65365101/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 31 thread M155x3 SKU: 65365100](https://maedler.in/product/locknut-din-981-km-31-thread-m155x3-sku-65365100/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 30 zinc plated inner diameter 150mm SKU: 65365081](https://maedler.in/product/lockwasher-din-5406-mb-30-zinc-plated-inner-diameter-150mm-sku-65365081/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 30 inner diameter 150mm SKU: 65365001](https://maedler.in/product/lockwasher-din-5406-mb-30-inner-diameter-150mm-sku-65365001/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 30 thread M150x2 SKU: 65365000](https://maedler.in/product/locknut-din-981-km-30-thread-m150x2-sku-65365000/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 29 zinc plated inner diameter 145mm SKU: 65364981](https://maedler.in/product/lockwasher-din-5406-mb-29-zinc-plated-inner-diameter-145mm-sku-65364981/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 29 inner diameter 145mm SKU: 65364901](https://maedler.in/product/lockwasher-din-5406-mb-29-inner-diameter-145mm-sku-65364901/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 29 thread M145x2 SKU: 65364900](https://maedler.in/product/locknut-din-981-km-29-thread-m145x2-sku-65364900/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB6 zinc plated inner diameter 30mm SKU: 65364881](https://maedler.in/product/lockwasher-din-5406-mb6-zinc-plated-inner-diameter-30mm-sku-65364881/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 6 inner diameter 30mm SKU: 65364801](https://maedler.in/product/lockwasher-din-5406-type-mb-6-inner-diameter-30mm-sku-65364801/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 6 thread M30x1.5 SKU: 65364800](https://maedler.in/product/locknut-din-981-km-6-thread-m30x1-5-sku-65364800/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 28 zinc plated inner diameter 140mm SKU: 65364781](https://maedler.in/product/lockwasher-din-5406-mb-28-zinc-plated-inner-diameter-140mm-sku-65364781/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 28 inner diameter 140mm SKU: 65364701](https://maedler.in/product/lockwasher-din-5406-mb-28-inner-diameter-140mm-sku-65364701/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 28 thread M140x2 SKU: 65364700](https://maedler.in/product/locknut-din-981-km-28-thread-m140x2-sku-65364700/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 27 zinc plated inner diameter 135mm SKU: 65364681](https://maedler.in/product/lockwasher-din-5406-mb-27-zinc-plated-inner-diameter-135mm-sku-65364681/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 27 inner diameter 135mm SKU: 65364601](https://maedler.in/product/lockwasher-din-5406-mb-27-inner-diameter-135mm-sku-65364601/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 27 thread M135x2 SKU: 65364600](https://maedler.in/product/locknut-din-981-km-27-thread-m135x2-sku-65364600/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 26 zinc plated inner diameter 130mm SKU: 65364581](https://maedler.in/product/lockwasher-din-5406-mb-26-zinc-plated-inner-diameter-130mm-sku-65364581/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 26 inner diameter 130mm SKU: 65364501](https://maedler.in/product/lockwasher-din-5406-mb-26-inner-diameter-130mm-sku-65364501/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 26 thread M130x2 SKU: 65364500](https://maedler.in/product/locknut-din-981-km-26-thread-m130x2-sku-65364500/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB5 zinc plated inner diameter 25mm SKU: 65364481](https://maedler.in/product/lockwasher-din-5406-mb5-zinc-plated-inner-diameter-25mm-sku-65364481/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 5 inner diameter 25mm SKU: 65364401](https://maedler.in/product/lockwasher-din-5406-type-mb-5-inner-diameter-25mm-sku-65364401/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 5 thread M25x1.5 SKU: 65364400](https://maedler.in/product/locknut-din-981-km-5-thread-m25x1-5-sku-65364400/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 25 zinc plated inner diameter 125mm SKU: 65364381](https://maedler.in/product/lockwasher-din-5406-mb-25-zinc-plated-inner-diameter-125mm-sku-65364381/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 25 inner diameter 125mm SKU: 65364301](https://maedler.in/product/lockwasher-din-5406-mb-25-inner-diameter-125mm-sku-65364301/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 25 thread M125x2 SKU: 65364300](https://maedler.in/product/locknut-din-981-km-25-thread-m125x2-sku-65364300/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 24 zinc plated inner diameter 120mm SKU: 65364281](https://maedler.in/product/lockwasher-din-5406-mb-24-zinc-plated-inner-diameter-120mm-sku-65364281/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 24 inner diameter 120mm SKU: 65364201](https://maedler.in/product/lockwasher-din-5406-mb-24-inner-diameter-120mm-sku-65364201/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 24 thread M120x2 SKU: 65364200](https://maedler.in/product/locknut-din-981-km-24-thread-m120x2-sku-65364200/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 23 zinc plated inner diameter 115mm SKU: 65364181](https://maedler.in/product/lockwasher-din-5406-mb-23-zinc-plated-inner-diameter-115mm-sku-65364181/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 23 inner diameter 115mm SKU: 65364101](https://maedler.in/product/lockwasher-din-5406-mb-23-inner-diameter-115mm-sku-65364101/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 23 thread M115x2 SKU: 65364100](https://maedler.in/product/locknut-din-981-km-23-thread-m115x2-sku-65364100/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB4 zinc plated inner diameter 20mm SKU: 65364081](https://maedler.in/product/lockwasher-din-5406-mb4-zinc-plated-inner-diameter-20mm-sku-65364081/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 4 inner diameter 20mm SKU: 65364001](https://maedler.in/product/lockwasher-din-5406-type-mb-4-inner-diameter-20mm-sku-65364001/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 4 thread M20x1 SKU: 65364000](https://maedler.in/product/locknut-din-981-km-4-thread-m20x1-sku-65364000/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 22 zinc plated inner diameter 110mm SKU: 65363981](https://maedler.in/product/lockwasher-din-5406-mb-22-zinc-plated-inner-diameter-110mm-sku-65363981/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 22 inner diameter 110mm SKU: 65363901](https://maedler.in/product/lockwasher-din-5406-mb-22-inner-diameter-110mm-sku-65363901/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 22 thread M110x2 SKU: 65363900](https://maedler.in/product/locknut-din-981-km-22-thread-m110x2-sku-65363900/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 21 zinc plated inner diameter 105mm SKU: 65363881](https://maedler.in/product/lockwasher-din-5406-mb-21-zinc-plated-inner-diameter-105mm-sku-65363881/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 21 inner diameter 105mm SKU: 65363801](https://maedler.in/product/lockwasher-din-5406-mb-21-inner-diameter-105mm-sku-65363801/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 21 thread M105x2 SKU: 65363800](https://maedler.in/product/locknut-din-981-km-21-thread-m105x2-sku-65363800/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB3 zinc plated inner diameter 17mm SKU: 65363781](https://maedler.in/product/lockwasher-din-5406-mb3-zinc-plated-inner-diameter-17mm-sku-65363781/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 3 inner diameter 17mm SKU: 65363701](https://maedler.in/product/lockwasher-din-5406-type-mb-3-inner-diameter-17mm-sku-65363701/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 3 thread M17x1 SKU: 65363700](https://maedler.in/product/locknut-din-981-km-3-thread-m17x1-sku-65363700/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB2 zinc plated inner diameter 15mm SKU: 65363481](https://maedler.in/product/lockwasher-din-5406-mb2-zinc-plated-inner-diameter-15mm-sku-65363481/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 2 inner diameter 15mm SKU: 65363401](https://maedler.in/product/lockwasher-din-5406-type-mb-2-inner-diameter-15mm-sku-65363401/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 2 thread M15x1 SKU: 65363400](https://maedler.in/product/locknut-din-981-km-2-thread-m15x1-sku-65363400/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB1 zinc plated inner diameter 12mm SKU: 65363281](https://maedler.in/product/lockwasher-din-5406-mb1-zinc-plated-inner-diameter-12mm-sku-65363281/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 1 inner diameter 12mm SKU: 65363201](https://maedler.in/product/lockwasher-din-5406-type-mb-1-inner-diameter-12mm-sku-65363201/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 1 thread M12x1 SKU: 65363200](https://maedler.in/product/locknut-din-981-km-1-thread-m12x1-sku-65363200/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB0 zinc plated inner diameter 10mm SKU: 65363081](https://maedler.in/product/lockwasher-din-5406-mb0-zinc-plated-inner-diameter-10mm-sku-65363081/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 0 inner diameter 10mm SKU: 65363001](https://maedler.in/product/lockwasher-din-5406-type-mb-0-inner-diameter-10mm-sku-65363001/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 0 thread M10x0.75 SKU: 65363000](https://maedler.in/product/locknut-din-981-km-0-thread-m10x0-75-sku-65363000/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [locknut KMTA 20 M100x2 SKU: 65358120](https://maedler.in/product/locknut-kmta-20-m100x2-sku-65358120/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 19 M95x2 SKU: 65358119](https://maedler.in/product/locknut-kmta-19-m95x2-sku-65358119/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 18 M90x2 SKU: 65358118](https://maedler.in/product/locknut-kmta-18-m90x2-sku-65358118/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 17 M85x2 SKU: 65358117](https://maedler.in/product/locknut-kmta-17-m85x2-sku-65358117/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 16 M80x2 SKU: 65358116](https://maedler.in/product/locknut-kmta-16-m80x2-sku-65358116/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 15 M75x1,5 SKU: 65358115](https://maedler.in/product/locknut-kmta-15-m75x15-sku-65358115/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 14 M70x1,5 SKU: 65358114](https://maedler.in/product/locknut-kmta-14-m70x15-sku-65358114/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 13 M65x1,5 SKU: 65358113](https://maedler.in/product/locknut-kmta-13-m65x15-sku-65358113/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 12 M60x1,5 SKU: 65358112](https://maedler.in/product/locknut-kmta-12-m60x15-sku-65358112/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 11 M55x1,5 SKU: 65358111](https://maedler.in/product/locknut-kmta-11-m55x15-sku-65358111/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 10 M50x1,5 SKU: 65358110](https://maedler.in/product/locknut-kmta-10-m50x15-sku-65358110/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 9 M45x1,5 SKU: 65358109](https://maedler.in/product/locknut-kmta-9-m45x15-sku-65358109/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 8 M40x1,5 SKU: 65358108](https://maedler.in/product/locknut-kmta-8-m40x15-sku-65358108/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 7 M35x1,5 SKU: 65358107](https://maedler.in/product/locknut-kmta-7-m35x15-sku-65358107/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 6 M30x1,5 SKU: 65358106](https://maedler.in/product/locknut-kmta-6-m30x15-sku-65358106/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [locknut KMTA 5 M25x1,5 SKU: 65358105](https://maedler.in/product/locknut-kmta-5-m25x15-sku-65358105/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.1) Axial bores for face spanner.2) Radial bores for hook wrench DIN 1810 form B with pins.3) Fastening torque of locking screw. - [Locknut KMT 20 M100x2 SKU: 65358020](https://maedler.in/product/locknut-kmt-20-m100x2-sku-65358020/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 19 M95x2 SKU: 65358019](https://maedler.in/product/locknut-kmt-19-m95x2-sku-65358019/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 18 M90x2 SKU: 65358018](https://maedler.in/product/locknut-kmt-18-m90x2-sku-65358018/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 17 M85x2 SKU: 65358017](https://maedler.in/product/locknut-kmt-17-m85x2-sku-65358017/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 16 M80x2 SKU: 65358016](https://maedler.in/product/locknut-kmt-16-m80x2-sku-65358016/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 15 M75x2 SKU: 65358015](https://maedler.in/product/locknut-kmt-15-m75x2-sku-65358015/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 14 M70x2 SKU: 65358014](https://maedler.in/product/locknut-kmt-14-m70x2-sku-65358014/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 13 M65x2 SKU: 65358013](https://maedler.in/product/locknut-kmt-13-m65x2-sku-65358013/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 12 M60x2 SKU: 65358012](https://maedler.in/product/locknut-kmt-12-m60x2-sku-65358012/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 11 M55x2 SKU: 65358011](https://maedler.in/product/locknut-kmt-11-m55x2-sku-65358011/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 10 M50x1.5 SKU: 65358010](https://maedler.in/product/locknut-kmt-10-m50x1-5-sku-65358010/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 9 M45x1.5 SKU: 65358009](https://maedler.in/product/locknut-kmt-9-m45x1-5-sku-65358009/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 8 M40x1.5 SKU: 65358008](https://maedler.in/product/locknut-kmt-8-m40x1-5-sku-65358008/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 7 M35x1.5 SKU: 65358007](https://maedler.in/product/locknut-kmt-7-m35x1-5-sku-65358007/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 6 M30x1.5 SKU: 65358006](https://maedler.in/product/locknut-kmt-6-m30x1-5-sku-65358006/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 5 M25x1.5 SKU: 65358005](https://maedler.in/product/locknut-kmt-5-m25x1-5-sku-65358005/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 4 M20x1 SKU: 65358004](https://maedler.in/product/locknut-kmt-4-m20x1-sku-65358004/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 3 M17x1 SKU: 65358003](https://maedler.in/product/locknut-kmt-3-m17x1-sku-65358003/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 2 M15x1 SKU: 65358002](https://maedler.in/product/locknut-kmt-2-m15x1-sku-65358002/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 1 M12x1 SKU: 65358001](https://maedler.in/product/locknut-kmt-1-m12x1-sku-65358001/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Locknut KMT 0 M10x0.75 SKU: 65358000](https://maedler.in/product/locknut-kmt-0-m10x0-75-sku-65358000/): Material: Body of the nut steel, min. strength 350 N/mm2.Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Up to size 15 with two additional wrench flats. KMT-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening Torque of Locking Screw - [Precision double universal joint WDN with needle bearing DIN808 bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63167000N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-35h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63167000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63166300N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63166300n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63165000N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63165000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Slip shaft LW with ball joints bore 45H7 with keyway DIN 6885-1 on both sides outer diameter 70mm steel SKU: 63157000N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-45h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-70mm-steel-sku-63157000n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 40H7 with keyway DIN 6885-1 on both sides outer diameter 65mm steel SKU: 63156500N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-40h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-65mm-steel-sku-63156500n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 30H7 with keyway DIN 6885-1 on both sides outer diameter 55mm steel SKU: 63155500N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-30h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-55mm-steel-sku-63155500n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 20H7 with keyway DIN 6885-1 on both sides outer diameter 40mm steel SKU: 63154000N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-20h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-40mm-steel-sku-63154000n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 16H7 with keyway DIN 6885-1 on both sides outer diameter 32mm steel SKU: 63153200N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-16h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-32mm-steel-sku-63153200n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Slip shaft LW with ball joints bore 14H7 with keyway DIN 6885-1 on both sides outer diameter 28mm steel SKU: 63152800N](https://maedler.in/product/slip-shaft-lw-with-ball-joints-bore-14h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-28mm-steel-sku-63152800n/): Material: Steel 11SMnPb30K. Max. operating angle per joint 35°. With ball joints RW for power transmission in applications where longitudinal displacement occurs. The variation in length is effected with a multiple-spline shaft. Torques as for ball joints RW. Other lengths on request. Temperature range: -70°C to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 45H7 with keyway DIN 6885-1 on both sides outer diameter 70mm steel SKU: 63137000N](https://maedler.in/product/ball-joint-rw-bore-45h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-70mm-steel-sku-63137000n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 40H7 with keyway DIN 6885-1 on both sides outer diameter 65mm steel SKU: 63136500N](https://maedler.in/product/ball-joint-rw-bore-40h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-65mm-steel-sku-63136500n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 35H7 with keyway DIN 6885-1 on both sides outer diameter 60mm steel SKU: 63136000N](https://maedler.in/product/ball-joint-rw-bore-35h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-60mm-steel-sku-63136000n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 30H7 with keyway DIN 6885-1 on both sides outer diameter 55mm steel SKU: 63135500N](https://maedler.in/product/ball-joint-rw-bore-30h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-55mm-steel-sku-63135500n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 25H7 with keyway DIN 6885-1 on both sides outer diameter 50mm steel SKU: 63135000N](https://maedler.in/product/ball-joint-rw-bore-25h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-50mm-steel-sku-63135000n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 20H7 with keyway DIN 6885-1 on both sides outer diameter 40mm steel SKU: 63134000N](https://maedler.in/product/ball-joint-rw-bore-20h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-40mm-steel-sku-63134000n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 18H7 with keyway DIN 6885-1 on both sides outer diameter 36mm steel SKU: 63133600N](https://maedler.in/product/ball-joint-rw-bore-18h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-36mm-steel-sku-63133600n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 14H7 with keyway DIN 6885-1 on both sides outer diameter 28mm steel SKU: 63132800N](https://maedler.in/product/ball-joint-rw-bore-14h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-28mm-steel-sku-63132800n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Ball joint RW bore 8H7 with keyway DIN 6885-1 on both sides outer diameter 16mm steel SKU: 63131600N](https://maedler.in/product/ball-joint-rw-bore-8h7-with-keyway-din-6885-1-on-both-sides-outer-diameter-16mm-steel-sku-63131600n/): Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production. - [Precision single universal joint WE DIN808 bore 35H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63127000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-35h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63127000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 105mm steel SKU: 63125200N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-105mm-steel-sku-63125200n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63125000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63125000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 82mm steel SKU: 63124200N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-82mm-steel-sku-63124200n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63124000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63124000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63123700N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63123700n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 68mm steel SKU: 63123300N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-68mm-steel-sku-63123300n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides total length 60mm steel SKU: 63123000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-total-length-60mm-steel-sku-63123000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WE DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63122000N](https://maedler.in/product/precision-single-universal-joint-we-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63122000n/): Material: Steel. Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 40H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63118000N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-40h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63118000n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63115000N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63115000n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63114000N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63114000n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WEN with needle bearing DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63112600N](https://maedler.in/product/precision-single-universal-joint-wen-with-needle-bearing-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63112600n/): Material: Steel 35SMnPb10, Bearing Parts 18NiCrMo5Pb. Max. Operating Angle 45°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63075800N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63075800n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63074100N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63074100n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63074000N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63074000n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 16H7 material steel total length 100mm outer diameter 29mm SKU: 63072900](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-16h7-material-steeltotal-length-100mm-outer-diameter-29mm-sku-63072900/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63072500N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63072500n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Double universal joint WDL similar to DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63072000N](https://maedler.in/product/double-universal-joint-wdl-similar-to-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63072000n/): Material: Steel. Max. Operating Angle 90. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can be only used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63064700N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63064700n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63063200N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63063200n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63062900N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63062900n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Single universal joint WEL similar to DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63062000N](https://maedler.in/product/single-universal-joint-wel-similar-to-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63062000n/): Material: Steel. Max. Operating Angle 45°. These low-price, single universal joints are especially suited for manual operation at low torques. As the contact surfaces are not hardened/ground, they can only be used at high speeds for short intervals. *only for short intervals With keyway DIN 6885-1, on both sides. - [Cardan joint KE outer diameter 40mm bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63014000N](https://maedler.in/product/cardan-joint-ke-outer-diameter-40mm-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63014000n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 32mm bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63013200N](https://maedler.in/product/cardan-joint-ke-outer-diameter-32mm-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63013200n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 25mm bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63012500N](https://maedler.in/product/cardan-joint-ke-outer-diameter-25mm-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63012500n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 16mm bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63011600N](https://maedler.in/product/cardan-joint-ke-outer-diameter-16mm-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63011600n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Cardan joint KE outer diameter 13mm bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63011300N](https://maedler.in/product/cardan-joint-ke-outer-diameter-13mm-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63011300n/): Material: Steel C 45. Max. Operating Angle 45°. The cardan joints KE are, other than the cardan joints with needle-roller bearing, only sliding-contact bearings. Their scope of application is therefore limited to slow running drives. The respective maximum speeds depend on operating angle and load, but must never exceed 1000 rpm. The maximum torque values listed in the table are limits, which must neither be exceeded. They may only be used to their full extend with intermittent operation or at low speed. The following limit applies: The product of speed (rpm) x working angle (degrees) may not exceed the reference number 500. This means, e.g., for a working angle of 10 degrees a max. speed of 50 rpm. If, however, the maximum torque is not taken to the limit, speed and working angle can be larger. At 0.5 x max. torque applies: speed x working angle, smaller or equal 4.000. In case of doubt choose larger joint. At continuous operation the cardan joints need to be sufficiently lubricated. If no drip-feed lubrication is possible, lubricate the joints at least once a day. Another possibility is to cover the joints with a bellow, filled with a suitable lubricant. Type N: with bores and keyways DIN 6885-1 on both sides. - [Disc spring set LL for safety clutch CM size 55 Nr.61265500 consisting of 6 springs strength L SKU: 61265504](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-55-nr-61265500-consisting-of-6-springs-strength-l-sku-61265504/): Material: Special spring-steel. Fitting to coupling product no. 61265500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set L for safety clutch CM size 55 Nr.61265500 consisting of 5 springs strength L SKU: 61265503](https://maedler.in/product/disc-spring-set-l-for-safety-clutch-cm-size-55-nr-61265500-consisting-of-5-springs-strength-l-sku-61265503/): Material: Special spring-steel. Fitting to coupling product no. 61265500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set M for safety clutch CM size 55 Nr.61265500 consisting of 5 springs strength M SKU: 61265502](https://maedler.in/product/disc-spring-set-m-for-safety-clutch-cm-size-55-nr-61265500-consisting-of-5-springs-strength-m-sku-61265502/): Material: Special spring-steel. Fitting to coupling product no. 61265500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set S for safety clutch CM size 55 Nr.61265500 consisting of 6 springs strength S SKU: 61265501](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-55-nr-61265500-consisting-of-6-springs-strength-s-sku-61265501/): Material: Special spring-steel. Fitting to coupling product no. 61265500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Safety clutch CM Gr. 55 SKU: 61265500](https://maedler.in/product/safety-clutch-cm-gr-55-sku-61265500/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Disc spring set LL for safety clutch CM size 45 Nr.61264500 consisting of 6 springs strength L SKU: 61264504](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-45-nr-61264500-consisting-of-6-springs-strength-l-sku-61264504/): Material: Special spring-steel. Fitting to coupling product no. 61264500. Delivery: Complete set. The disks have to be monted like scetch above / PDF-catalog page. - [Disc spring set L for safety clutch CM size 45 Nr.61264500 consisting of 5 springs strength L SKU: 61264503](https://maedler.in/product/disc-spring-set-l-for-safety-clutch-cm-size-45-nr-61264500-consisting-of-5-springs-strength-l-sku-61264503/): Material: Special spring-steel. Fitting to coupling product no. 61264500. Delivery: Complete set. The disks have to be monted like scetch above / PDF-catalog page. - [Disc spring set M for safety clutch CM size 45 Nr.61264500 consisting of 5 springs strength M SKU: 61264502](https://maedler.in/product/disc-spring-set-m-for-safety-clutch-cm-size-45-nr-61264500-consisting-of-5-springs-strength-m-sku-61264502/): Material: Special spring-steel. Fitting to coupling product no. 61264500. Delivery: Complete set. The disks have to be monted like scetch above / PDF-catalog page. - [Disc spring set S for safety clutch CM size 45 Nr.61264500 consisting of 6 springs strength S SKU: 61264501](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-45-nr-61264500-consisting-of-6-springs-strength-s-sku-61264501/): Material: Special spring-steel. Fitting to coupling product no. 61264500. Delivery: Complete set. The disks have to be monted like scetch above / PDF-catalog page. - [Safety clutch CM Gr. 45 SKU: 61264500](https://maedler.in/product/safety-clutch-cm-gr-45-sku-61264500/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Disc spring set LL for safety clutch CM size 35 Nr.61263500 consisting of 6 springs strength L SKU: 61263504](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-35-nr-61263500-consisting-of-6-springs-strength-l-sku-61263504/): Material: Special spring-steel. Fitting to coupling product no. 61263500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set L for safety clutch CM size 35 Nr.61263500 consisting of 5 springs strength L SKU: 61263503](https://maedler.in/product/disc-spring-set-l-for-safety-clutch-cm-size-35-nr-61263500-consisting-of-5-springs-strength-l-sku-61263503/): Material: Special spring-steel. Fitting to coupling product no. 61263500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set M for safety clutch CM size 35 Nr.61263500 consisting of 5 springs strength M SKU: 61263502](https://maedler.in/product/disc-spring-set-m-for-safety-clutch-cm-size-35-nr-61263500-consisting-of-5-springs-strength-m-sku-61263502/): Material: Special spring-steel. Fitting to coupling product no. 61263500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set S for safety clutch CM size 35 Nr.61263500 consisting of 6 springs strength S SKU: 61263501](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-35-nr-61263500-consisting-of-6-springs-strength-s-sku-61263501/): Material: Special spring-steel. Fitting to coupling product no. 61263500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Safety clutch CM Gr. 35 SKU: 61263500](https://maedler.in/product/safety-clutch-cm-gr-35-sku-61263500/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Disc spring set LL for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength L SKU: 61262504](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-25-nr-61262500-consisting-of-6-springs-strength-l-sku-61262504/): Material: Special spring-steel. Fitting to coupling product no. 61262500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set L for safety clutch CM size 25 Nr.61262500 consisting of 5 springs strength L SKU: 61262503](https://maedler.in/product/disc-spring-set-l-for-safety-clutch-cm-size-25-nr-61262500-consisting-of-5-springs-strength-l-sku-61262503/): Material: Special spring-steel. Fitting to coupling product no. 61262500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set M for safety clutch CM size 25 Nr.61262500 consisting of 5 springs strength M SKU: 61262502](https://maedler.in/product/disc-spring-set-m-for-safety-clutch-cm-size-25-nr-61262500-consisting-of-5-springs-strength-m-sku-61262502/): Material: Special spring-steel. Fitting to coupling product no. 61262500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S SKU: 61262501](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-25-nr-61262500-consisting-of-6-springs-strength-s-sku-61262501/): Material: Special spring-steel. Fitting to coupling product no. 61262500. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. - [Safety clutch CM Gr. 25 SKU: 61262500](https://maedler.in/product/safety-clutch-cm-gr-25-sku-61262500/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Disc spring set LL for safety clutch CM size 20 Nr.61262000 consisting of 4 springs strength L SKU: 61262004](https://maedler.in/product/disc-spring-set-ll-for-safety-clutch-cm-size-20-nr-61262000-consisting-of-4-springs-strength-l-sku-61262004/): Material: Special spring-steel. Fitting to coupling product no. 61262000. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. The set product-no. 61262002 is for both torque ranges M and L. - [Disc spring set M / L for safety clutch CM Gr. 20 Nr.61262000 consisting of 5 springs strength M SKU: 61262002](https://maedler.in/product/disc-spring-set-m-l-for-safety-clutch-cm-gr-20-nr-61262000-consisting-of-5-springs-strength-m-sku-61262002/): Material: Special spring-steel. Fitting to coupling product no. 61262000. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. The set product-no. 61262002 is for both torque ranges M and L. - [Disc spring set S for safety clutch CM size 20 Nr.61262000 consisting of 6 springs strength S SKU: 61262001](https://maedler.in/product/disc-spring-set-s-for-safety-clutch-cm-size-20-nr-61262000-consisting-of-6-springs-strength-s-sku-61262001/): Material: Special spring-steel. Fitting to coupling product no. 61262000. Delivery: Complete set. The disks have to be mounted like scetch above / PDF-catalog page. The set product-no. 61262002 is for both torque ranges M and L. - [Safety clutch CM Gr. 20 SKU: 61262000](https://maedler.in/product/safety-clutch-cm-gr-20-sku-61262000/): Material: Steel. Overload system operating on the positive principle, available in 5 sizes. For each size there are 4 different disk-plate sets for different torque ranges. The required disk-plate set S, M, L or LL has to be ordered separately and is supplied unassembled. When mounting simple driving elements, as sprockets, pulleys, etc., always make sure the shaft is supported. Optimal protection against overloads. Trigger torque can be adjusted. High reproducibility of the triggering and re-engaging process. Robust design, long service life, absolutely maintenance free. Immediate free-wheeling of the drive. Automatic emergency stop of the driving unit through switch (to be ordered seperately). Not negatively affected by frequent triggering sequences. The optional limit switch (emergency-stop switch) for all sizes Product No. 612 605 00 has to be ordered seperately. On request with works adjustment of torque limit. Customized bores and feather-key grooves available at surcharge. Other types on request: Beside the standard type (dis-engaging / re-engaging), there are synchron types, lock types and releasing types available. - [Friction lining for sliding hub ROBA 612420 SKU: 61242100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612420-sku-61242100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 240-1200 Nm outer diameter 200mm max. bore: 80mm SKU: 61242000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-240-1200-nm-outer-diameter-200mm-max-bore-80mm-sku-61242000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612400 SKU: 61240100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612400-sku-61240100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 140-700 Nm outer diameter 170mm max. bore: 65mm SKU: 61240000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-140-700-nm-outer-diameter-170mm-max-bore-65mm-sku-61240000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612380 SKU: 61238100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612380-sku-61238100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 110-550 Nm outer diameter 140mm max. bore: 55mm SKU: 61238000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-110-550-nm-outer-diameter-140mm-max-bore-55mm-sku-61238000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612360 SKU: 61236100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612360-sku-61236100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 50-250 Nm outer diameter 115mm max. bore: 45mm SKU: 61236000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-50-250-nm-outer-diameter-115mm-max-bore-45mm-sku-61236000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612340 SKU: 61234100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612340-sku-61234100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 26-130 Nm outer diameter 88mm max. bore: 35mm SKU: 61234000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-26-130-nm-outer-diameter-88mm-max-bore-35mm-sku-61234000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612320 SKU: 61232100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612320-sku-61232100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 14-70 Nm outer diameter 68mm max. bore: 25mm SKU: 61232000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-14-70-nm-outer-diameter-68mm-max-bore-25mm-sku-61232000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 61231000 SKU: 61231100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-61231000-sku-61231100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 6-30 Nm outer diameter 58mm max. bore: 22mm SKU: 61231000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-6-30-nm-outer-diameter-58mm-max-bore-22mm-sku-61231000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Friction lining for sliding hub ROBA 612300 SKU: 61230100](https://maedler.in/product/friction-lining-for-sliding-hub-roba-612300-sku-61230100/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub ROBA torque adjustable 2-10 Nm outer diameter 45mm max. bore: 20mm SKU: 61230000](https://maedler.in/product/sliding-hub-roba-torque-adjustable-2-10-nm-outer-diameter-45mm-max-bore-20mm-sku-61230000/): Material: Steel. ROBA®-sliding hubs, high-quality machine components, are used as torque limiters for chain-, gear- and belt-drives. They are high-quality machine components. They are machined all-round and zinc-phosphated, i.e. rust-proof. They are of fully-closed design. The hubs are delivered with pilt bore and max. bush length. Customized bores, and feather-key grooves and setscrew-threads available at surcharge.* See catalogue page. - [Sliding hub with elastic coupling type RNR, size 2 SKU: 61220300](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-2-sku-61220300/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Sliding hub with elastic coupling type RNR, size 1 SKU: 61220200](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-1-sku-61220200/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Sliding hub with elastic coupling type RNR, size 01 SKU: 61220100](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-01-sku-61220100/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Sliding hub with elastic coupling type RNR, size 0 SKU: 61220000](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-0-sku-61220000/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Sliding hub with elastic coupling type RNR, size 00 SKU: 61219900](https://maedler.in/product/sliding-hub-with-elastic-coupling-type-rnr-size-00-sku-61219900/): Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves and setscrew-threads available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. - [Friction disc for sliding hub FA size 8 170x285x5mm SKU: 61210801](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-8-170x285x5mm-sku-61210801/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 8 torque adjustable 900-3400 Nm outer diameter 285 mm max. bore: 120mm SKU: 61210800](https://maedler.in/product/sliding-hub-fa-size-8-torque-adjustable-900-3400-nm-outer-diameter-285-mm-max-bore-120mm-sku-61210800/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 7 144x240x5mm SKU: 61210701](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-7-144x240x5mm-sku-61210701/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 7 torque adjustable 600-2200 Nm outer diameter 240 mm max. bore: 100mm SKU: 61210700](https://maedler.in/product/sliding-hub-fa-size-7-torque-adjustable-600-2200-nm-outer-diameter-240-mm-max-bore-100mm-sku-61210700/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 6 116x200x5mm SKU: 61210601](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-6-116x200x5mm-sku-61210601/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 6 torque adjustable 300-1200 Nm outer diameter 200 mm max. bore: 80mm SKU: 61210600](https://maedler.in/product/sliding-hub-fa-size-6-torque-adjustable-300-1200-nm-outer-diameter-200-mm-max-bore-80mm-sku-61210600/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 5 98x170x5mm SKU: 61210501](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-5-98x170x5mm-sku-61210501/): Delievery per piece. For each hub there are 2 pieces required. - [Sliding hub FA size 5 torque adjustable 280-800 Nm outer diameter 170 mm max. bore: 65mm SKU: 61210500](https://maedler.in/product/sliding-hub-fa-size-5-torque-adjustable-280-800-nm-outer-diameter-170-mm-max-bore-65mm-sku-61210500/): Material: Steel, zinc-plated and chromated.- High-quality version.- The slipping torque can be adjusted with common assembly tools for screws, also after mounting.- By mounting additional springs, the torque range can be increased. (additional springs have to be ordered separately).- The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge.Required bush length:The bush length required depends on the width of the component to be joined.Prod. No. 612 100 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm.From Prod. No. 612 100 10: Bush length in mm = 1.5 x s + b + 0.5 - [Friction disc for sliding hub FA size 4 85x140x4mm SKU: 61210401](https://maedler.in/product/friction-disc-for-sliding-hub-fa-size-4-85x140x4mm-sku-61210401/): Delievery per piece. For each hub there are 2 pieces required. - [Turnbuckle DIN 1480 with hook and eye thread M16 material S235 galvanized SKU: 65388116](https://maedler.in/product/turnbuckle-din-1480-with-hook-and-eye-thread-m16-material-s235-galvanized-sku-65388116/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with hook and eye. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with hook and eye thread M12 material S235 galvanized SKU: 65388112](https://maedler.in/product/turnbuckle-din-1480-with-hook-and-eye-thread-m12-material-s235-galvanized-sku-65388112/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with hook and eye. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with hook and eye thread M10 material S235 galvanized SKU: 65388110](https://maedler.in/product/turnbuckle-din-1480-with-hook-and-eye-thread-m10-material-s235-galvanized-sku-65388110/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with hook and eye. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with hook and eye thread M8 material S235 galvanized SKU: 65388108](https://maedler.in/product/turnbuckle-din-1480-with-hook-and-eye-thread-m8-material-s235-galvanized-sku-65388108/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with hook and eye. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with hook and eye thread M6 material S235 galvanized SKU: 65388106](https://maedler.in/product/turnbuckle-din-1480-with-hook-and-eye-thread-m6-material-s235-galvanized-sku-65388106/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with hook and eye. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Knurled thumb screw 421 M10 x 40mm long set screw steel zinc plated SKU: 65379800](https://maedler.in/product/knurled-thumb-screw-421-m10-x-40mm-long-set-screw-steel-zinc-plated-sku-65379800/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M10 x 30mm long set screw steel zinc plated SKU: 65379600](https://maedler.in/product/knurled-thumb-screw-421-m10-x-30mm-long-set-screw-steel-zinc-plated-sku-65379600/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M10 x 25mm long set screw steel zinc plated SKU: 65379500](https://maedler.in/product/knurled-thumb-screw-421-m10-x-25mm-long-set-screw-steel-zinc-plated-sku-65379500/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M10 x 20mm long set screw steel zinc plated SKU: 65379400](https://maedler.in/product/knurled-thumb-screw-421-m10-x-20mm-long-set-screw-steel-zinc-plated-sku-65379400/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M8 x 40mm long set screw steel zinc plated SKU: 65379300](https://maedler.in/product/knurled-thumb-screw-421-m8-x-40mm-long-set-screw-steel-zinc-plated-sku-65379300/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M8 x 30mm long set screw steel zinc plated SKU: 65379200](https://maedler.in/product/knurled-thumb-screw-421-m8-x-30mm-long-set-screw-steel-zinc-plated-sku-65379200/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M8 x 20mm long set screw steel zinc plated SKU: 65379000](https://maedler.in/product/knurled-thumb-screw-421-m8-x-20mm-long-set-screw-steel-zinc-plated-sku-65379000/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M8 x 16mm long set screw steel zinc plated SKU: 65378800](https://maedler.in/product/knurled-thumb-screw-421-m8-x-16mm-long-set-screw-steel-zinc-plated-sku-65378800/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M6 x 30mm long set screw steel zinc plated SKU: 65378700](https://maedler.in/product/knurled-thumb-screw-421-m6-x-30mm-long-set-screw-steel-zinc-plated-sku-65378700/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M6 x 25mm long set screw steel zinc plated SKU: 65378600](https://maedler.in/product/knurled-thumb-screw-421-m6-x-25mm-long-set-screw-steel-zinc-plated-sku-65378600/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M6 x 20mm long set screw steel zinc plated SKU: 65378400](https://maedler.in/product/knurled-thumb-screw-421-m6-x-20mm-long-set-screw-steel-zinc-plated-sku-65378400/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M6 x 16mm long set screw steel zinc plated SKU: 65378200](https://maedler.in/product/knurled-thumb-screw-421-m6-x-16mm-long-set-screw-steel-zinc-plated-sku-65378200/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M5 x 25mm long set screw steel zinc plated SKU: 65378100](https://maedler.in/product/knurled-thumb-screw-421-m5-x-25mm-long-set-screw-steel-zinc-plated-sku-65378100/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M5 x 20mm long set screw steel zinc plated SKU: 65378000](https://maedler.in/product/knurled-thumb-screw-421-m5-x-20mm-long-set-screw-steel-zinc-plated-sku-65378000/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M5 x 15mm long set screw steel zinc plated SKU: 65377800](https://maedler.in/product/knurled-thumb-screw-421-m5-x-15mm-long-set-screw-steel-zinc-plated-sku-65377800/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M5 x 10mm long set screw steel zinc plated SKU: 65377600](https://maedler.in/product/knurled-thumb-screw-421-m5-x-10mm-long-set-screw-steel-zinc-plated-sku-65377600/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M4 x 30mm long set screw steel zinc plated SKU: 65377500](https://maedler.in/product/knurled-thumb-screw-421-m4-x-30mm-long-set-screw-steel-zinc-plated-sku-65377500/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M4 x 20mm long set screw steel zinc plated SKU: 65377400](https://maedler.in/product/knurled-thumb-screw-421-m4-x-20mm-long-set-screw-steel-zinc-plated-sku-65377400/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M4 x 15mm long set screw steel zinc plated SKU: 65377200](https://maedler.in/product/knurled-thumb-screw-421-m4-x-15mm-long-set-screw-steel-zinc-plated-sku-65377200/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Knurled thumb screw 421 M4 x 10mm long set screw steel zinc plated SKU: 65377000](https://maedler.in/product/knurled-thumb-screw-421-m4-x-10mm-long-set-screw-steel-zinc-plated-sku-65377000/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Steel, zinc plated, chromatised blue - [Hollow knurled nut 420 M10 bush steel zinc plated SKU: 65376000](https://maedler.in/product/hollow-knurled-nut-420-m10-bush-steel-zinc-plated-sku-65376000/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Bush: Steel, zinc plated, chromatised blue. - [Hollow knurled nut 420 M8 bush steel zinc plated SKU: 65375800](https://maedler.in/product/hollow-knurled-nut-420-m8-bush-steel-zinc-plated-sku-65375800/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Bush: Steel, zinc plated, chromatised blue. - [Hollow knurled nut 420 M6 bush steel zinc plated SKU: 65375600](https://maedler.in/product/hollow-knurled-nut-420-m6-bush-steel-zinc-plated-sku-65375600/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Bush: Steel, zinc plated, chromatised blue. - [Hollow knurled nut 420 M5 bush steel zinc plated SKU: 65375500](https://maedler.in/product/hollow-knurled-nut-420-m5-bush-steel-zinc-plated-sku-65375500/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Bush: Steel, zinc plated, chromatised blue. - [Hollow knurled nut 420 M4 bush steel zinc plated SKU: 65375400](https://maedler.in/product/hollow-knurled-nut-420-m4-bush-steel-zinc-plated-sku-65375400/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Bush: Steel, zinc plated, chromatised blue. - [Flat knurled nut DIN 467 M12 SKU: 65375200](https://maedler.in/product/flat-knurled-nut-din-467-m12-sku-65375200/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Flat knurled nut DIN 467 M10 SKU: 65375000](https://maedler.in/product/flat-knurled-nut-din-467-m10-sku-65375000/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Flat knurled nut DIN 467 M8 SKU: 65374800](https://maedler.in/product/flat-knurled-nut-din-467-m8-sku-65374800/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Flat knurled nut DIN 467 M6 SKU: 65374600](https://maedler.in/product/flat-knurled-nut-din-467-m6-sku-65374600/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Flat knurled nut DIN 467 M5 SKU: 65374500](https://maedler.in/product/flat-knurled-nut-din-467-m5-sku-65374500/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Flat knurled nut DIN 467 M4 SKU: 65374400](https://maedler.in/product/flat-knurled-nut-din-467-m4-sku-65374400/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Flat knurled nut DIN 467 M3 SKU: 65374300](https://maedler.in/product/flat-knurled-nut-din-467-m3-sku-65374300/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Knurled nut DIN 466 M12 SKU: 65373200](https://maedler.in/product/knurled-nut-din-466-m12-sku-65373200/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Knurled nut DIN 466 M10 SKU: 65373000](https://maedler.in/product/knurled-nut-din-466-m10-sku-65373000/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Knurled nut DIN 466 M8 SKU: 65372800](https://maedler.in/product/knurled-nut-din-466-m8-sku-65372800/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Knurled nut DIN 466 M6 SKU: 65372600](https://maedler.in/product/knurled-nut-din-466-m6-sku-65372600/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Knurled nut DIN 466 M5 SKU: 65372500](https://maedler.in/product/knurled-nut-din-466-m5-sku-65372500/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Knurled nut DIN 466 M4 SKU: 65372400](https://maedler.in/product/knurled-nut-din-466-m4-sku-65372400/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Knurled nut DIN 466 M3 SKU: 65372300](https://maedler.in/product/knurled-nut-din-466-m3-sku-65372300/): Material: Steel, tensile strength 5, visible face precision turned, black oxide finish. * Size M12 is not part of the DIN. - [Knurled nut DIN 6303 thread M12 steel SKU: 65371200](https://maedler.in/product/knurled-nut-din-6303-thread-m12-steel-sku-65371200/): Material: Steel, black oxide finish, without pin hole. - [Knurled nut DIN 6303 thread M10 steel SKU: 65371000](https://maedler.in/product/knurled-nut-din-6303-thread-m10-steel-sku-65371000/): Material: Steel, black oxide finish, without pin hole. - [Knurled nut DIN 6303 thread M8 steel SKU: 65370800](https://maedler.in/product/knurled-nut-din-6303-thread-m8-steel-sku-65370800/): Material: Steel, black oxide finish, without pin hole. - [Knurled nut DIN 6303 thread M6 steel SKU: 65370600](https://maedler.in/product/knurled-nut-din-6303-thread-m6-steel-sku-65370600/): Material: Steel, black oxide finish, without pin hole. - [Knurled nut DIN 6303 thread M5 steel SKU: 65370500](https://maedler.in/product/knurled-nut-din-6303-thread-m5-steel-sku-65370500/): Material: Steel, black oxide finish, without pin hole. - [Lockwasher DIN 5406 MB20 zinc plated inner diameter 100mm SKU: 65369081](https://maedler.in/product/lockwasher-din-5406-mb20-zinc-plated-inner-diameter-100mm-sku-65369081/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 20 inner diameter 100mm SKU: 65369001](https://maedler.in/product/lockwasher-din-5406-type-mb-20-inner-diameter-100mm-sku-65369001/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 20 thread M100x2 SKU: 65369000](https://maedler.in/product/locknut-din-981-km-20-thread-m100x2-sku-65369000/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB19 zinc plated inner diameter 95mm SKU: 65368781](https://maedler.in/product/lockwasher-din-5406-mb19-zinc-plated-inner-diameter-95mm-sku-65368781/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 19 inner diameter 95mm SKU: 65368701](https://maedler.in/product/lockwasher-din-5406-type-mb-19-inner-diameter-95mm-sku-65368701/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 19 thread M95x2 SKU: 65368700](https://maedler.in/product/locknut-din-981-km-19-thread-m95x2-sku-65368700/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB18 zinc plated inner diameter 90mm SKU: 65368581](https://maedler.in/product/lockwasher-din-5406-mb18-zinc-plated-inner-diameter-90mm-sku-65368581/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 18 inner diameter 90mm SKU: 65368501](https://maedler.in/product/lockwasher-din-5406-type-mb-18-inner-diameter-90mm-sku-65368501/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 18 thread M90x2 SKU: 65368500](https://maedler.in/product/locknut-din-981-km-18-thread-m90x2-sku-65368500/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB17 zinc plated inner diameter 85mm SKU: 65368381](https://maedler.in/product/lockwasher-din-5406-mb17-zinc-plated-inner-diameter-85mm-sku-65368381/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 17 inner diameter 85mm SKU: 65368301](https://maedler.in/product/lockwasher-din-5406-type-mb-17-inner-diameter-85mm-sku-65368301/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 17 thread M85x2 SKU: 65368300](https://maedler.in/product/locknut-din-981-km-17-thread-m85x2-sku-65368300/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB16 zinc plated inner diameter 80mm SKU: 65368081](https://maedler.in/product/lockwasher-din-5406-mb16-zinc-plated-inner-diameter-80mm-sku-65368081/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 16 inner diameter 80mm SKU: 65368001](https://maedler.in/product/lockwasher-din-5406-type-mb-16-inner-diameter-80mm-sku-65368001/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 16 thread M80x2 SKU: 65368000](https://maedler.in/product/locknut-din-981-km-16-thread-m80x2-sku-65368000/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB15 zinc plated inner diameter 75mm SKU: 65367881](https://maedler.in/product/lockwasher-din-5406-mb15-zinc-plated-inner-diameter-75mm-sku-65367881/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 15 inner diameter 75mm SKU: 65367801](https://maedler.in/product/lockwasher-din-5406-type-mb-15-inner-diameter-75mm-sku-65367801/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 15 thread M75x2 SKU: 65367800](https://maedler.in/product/locknut-din-981-km-15-thread-m75x2-sku-65367800/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB14 zinc plated inner diameter 70mm SKU: 65367581](https://maedler.in/product/lockwasher-din-5406-mb14-zinc-plated-inner-diameter-70mm-sku-65367581/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 14 inner diameter 70mm SKU: 65367501](https://maedler.in/product/lockwasher-din-5406-type-mb-14-inner-diameter-70mm-sku-65367501/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 14 thread M70x2 SKU: 65367500](https://maedler.in/product/locknut-din-981-km-14-thread-m70x2-sku-65367500/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB13 zinc plated inner diameter 65mm SKU: 65367381](https://maedler.in/product/lockwasher-din-5406-mb13-zinc-plated-inner-diameter-65mm-sku-65367381/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 13 inner diameter 65mm SKU: 65367301](https://maedler.in/product/lockwasher-din-5406-type-mb-13-inner-diameter-65mm-sku-65367301/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 13 thread M65x2 SKU: 65367300](https://maedler.in/product/locknut-din-981-km-13-thread-m65x2-sku-65367300/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB12 zinc plated inner diameter 60mm SKU: 65367181](https://maedler.in/product/lockwasher-din-5406-mb12-zinc-plated-inner-diameter-60mm-sku-65367181/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 12 inner diameter 60mm SKU: 65367101](https://maedler.in/product/lockwasher-din-5406-type-mb-12-inner-diameter-60mm-sku-65367101/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 12 thread M60x2 SKU: 65367100](https://maedler.in/product/locknut-din-981-km-12-thread-m60x2-sku-65367100/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB11 zinc plated inner diameter 55mm SKU: 65366881](https://maedler.in/product/lockwasher-din-5406-mb11-zinc-plated-inner-diameter-55mm-sku-65366881/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 11 inner diameter 55mm SKU: 65366801](https://maedler.in/product/lockwasher-din-5406-type-mb-11-inner-diameter-55mm-sku-65366801/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 11 thread M55x2 SKU: 65366800](https://maedler.in/product/locknut-din-981-km-11-thread-m55x2-sku-65366800/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB10 zinc plated inner diameter 50mm SKU: 65366581](https://maedler.in/product/lockwasher-din-5406-mb10-zinc-plated-inner-diameter-50mm-sku-65366581/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 10 inner diameter 50mm SKU: 65366501](https://maedler.in/product/lockwasher-din-5406-type-mb-10-inner-diameter-50mm-sku-65366501/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 10 thread M50x1.5 SKU: 65366500](https://maedler.in/product/locknut-din-981-km-10-thread-m50x1-5-sku-65366500/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB9 zinc plated inner diameter 45mm SKU: 65366281](https://maedler.in/product/lockwasher-din-5406-mb9-zinc-plated-inner-diameter-45mm-sku-65366281/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 9 inner diameter 45mm SKU: 65366201](https://maedler.in/product/lockwasher-din-5406-type-mb-9-inner-diameter-45mm-sku-65366201/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 9 thread M45x1.5 SKU: 65366200](https://maedler.in/product/locknut-din-981-km-9-thread-m45x1-5-sku-65366200/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 40 zinc plated inner diameter 200mm SKU: 65365981](https://maedler.in/product/lockwasher-din-5406-mb-40-zinc-plated-inner-diameter-200mm-sku-65365981/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 40 inner diameter 200mm SKU: 65365901](https://maedler.in/product/lockwasher-din-5406-mb-40-inner-diameter-200mm-sku-65365901/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 40 thread M200x3 SKU: 65365900](https://maedler.in/product/locknut-din-981-km-40-thread-m200x3-sku-65365900/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB8 zinc plated inner diameter 40mm SKU: 65365881](https://maedler.in/product/lockwasher-din-5406-mb8-zinc-plated-inner-diameter-40mm-sku-65365881/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 8 inner diameter 40mm SKU: 65365801](https://maedler.in/product/lockwasher-din-5406-type-mb-8-inner-diameter-40mm-sku-65365801/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 8 thread M40x1.5 SKU: 65365800](https://maedler.in/product/locknut-din-981-km-8-thread-m40x1-5-sku-65365800/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 38 zinc plated inner diameter 190mm SKU: 65365781](https://maedler.in/product/lockwasher-din-5406-mb-38-zinc-plated-inner-diameter-190mm-sku-65365781/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 38 inner diameter 190mm SKU: 65365701](https://maedler.in/product/lockwasher-din-5406-mb-38-inner-diameter-190mm-sku-65365701/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 38 thread M190x3 SKU: 65365700](https://maedler.in/product/locknut-din-981-km-38-thread-m190x3-sku-65365700/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 36 zinc plated inner diameter 180mm SKU: 65365681](https://maedler.in/product/lockwasher-din-5406-mb-36-zinc-plated-inner-diameter-180mm-sku-65365681/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 36 inner diameter 180mm SKU: 65365601](https://maedler.in/product/lockwasher-din-5406-mb-36-inner-diameter-180mm-sku-65365601/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 36 thread M180x3 SKU: 65365600](https://maedler.in/product/locknut-din-981-km-36-thread-m180x3-sku-65365600/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 MB 34 zinc plated inner diameter 170mm SKU: 65365581](https://maedler.in/product/lockwasher-din-5406-mb-34-zinc-plated-inner-diameter-170mm-sku-65365581/): Material: Steel zinc-plated, min. strength 350 N/mm2.Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 MB 34 inner diameter 170mm SKU: 65365501](https://maedler.in/product/lockwasher-din-5406-mb-34-inner-diameter-170mm-sku-65365501/): Material: Steel, min. strength 350 N/mm2.Safety plates for locknuts DIN 981.A keyway is required on the shaft thread. - [Locknut DIN 981 KM 34 thread M170x3 SKU: 65365500](https://maedler.in/product/locknut-din-981-km-34-thread-m170x3-sku-65365500/): Material: Steel, min. strength 350 N/mm².These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Rod end BR DIN ISO 12240-4 series K internal thread M20x1.5 right with spherical ball bearing SKU: 63242000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m20x1-5-right-with-spherical-ball-bearing-sku-63242000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M18x1.5 right with spherical ball bearing SKU: 63241800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m18x1-5-right-with-spherical-ball-bearing-sku-63241800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M16 right with spherical ball bearing SKU: 63241600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m16-right-with-spherical-ball-bearing-sku-63241600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M14 right with spherical ball bearing SKU: 63241400](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m14-right-with-spherical-ball-bearing-sku-63241400/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M12 right with spherical ball bearing SKU: 63241200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m12-right-with-spherical-ball-bearing-sku-63241200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M10 right with spherical ball bearing SKU: 63241000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m10-right-with-spherical-ball-bearing-sku-63241000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M8 right with spherical ball bearing SKU: 63240800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m8-right-with-spherical-ball-bearing-sku-63240800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M6 right with spherical ball bearing SKU: 63240600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m6-right-with-spherical-ball-bearing-sku-63240600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end GS DIN ISO 12240-4 series K external thread M42x2 left == Initial lubrication required before use == SKU: 63234000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m42x2-left-initial-lubrication-required-before-use-sku-63234000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M36x2 left == Initial lubrication required before use == SKU: 63233500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m36x2-left-initial-lubrication-required-before-use-sku-63233500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M30x2 left == Initial lubrication required before use == SKU: 63233000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m30x2-left-initial-lubrication-required-before-use-sku-63233000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M24x2 left == Initial lubrication required before use == SKU: 63232500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m24x2-left-initial-lubrication-required-before-use-sku-63232500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M22x1.5 left == Initial lubrication required before use == SKU: 63232200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m22x1-5-left-initial-lubrication-required-before-use-sku-63232200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M20x1.5 left == Initial lubrication required before use == SKU: 63232000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m20x1-5-left-initial-lubrication-required-before-use-sku-63232000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 left == Initial lubrication required before use == SKU: 63231800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m18x1-5-left-initial-lubrication-required-before-use-sku-63231800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M16 left == Initial lubrication required before use == SKU: 63231600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m16-left-initial-lubrication-required-before-use-sku-63231600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M14 left == Initial lubrication required before use == SKU: 63231400](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m14-left-initial-lubrication-required-before-use-sku-63231400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M12 left == Initial lubrication required before use == SKU: 63231200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m12-left-initial-lubrication-required-before-use-sku-63231200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M10 left == Initial lubrication required before use == SKU: 63231000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m10-left-initial-lubrication-required-before-use-sku-63231000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M8 left == Initial lubrication required before use == SKU: 63230800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m8-left-initial-lubrication-required-before-use-sku-63230800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M6 left == Initial lubrication required before use == SKU: 63230600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m6-left-initial-lubrication-required-before-use-sku-63230600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M5 left == Initial lubrication required before use == SKU: 63230500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m5-left-initial-lubrication-required-before-use-sku-63230500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M3 left == Initial lubrication required before use == SKU: 63230300](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m3-left-initial-lubrication-required-before-use-sku-63230300/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M2 left == Initial lubrication required before use == SKU: 63230200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m2-left-initial-lubrication-required-before-use-sku-63230200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M42x2 right == Initial lubrication required before use == SKU: 63224000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m42x2-right-initial-lubrication-required-before-use-sku-63224000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M36x2 right == Initial lubrication required before use == SKU: 63223500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m36x2-right-initial-lubrication-required-before-use-sku-63223500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M30x2 right == Initial lubrication required before use == SKU: 63223000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m30x2-right-initial-lubrication-required-before-use-sku-63223000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M24x2 right == Initial lubrication required before use == SKU: 63222500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m24x2-right-initial-lubrication-required-before-use-sku-63222500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M22x1.5 right == Initial lubrication required before use == SKU: 63222200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m22x1-5-right-initial-lubrication-required-before-use-sku-63222200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M20x1.5 right == Initial lubrication required before use == SKU: 63222000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m20x1-5-right-initial-lubrication-required-before-use-sku-63222000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 right == Initial lubrication required before use == SKU: 63221800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m18x1-5-right-initial-lubrication-required-before-use-sku-63221800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M16 right == Initial lubrication required before use == SKU: 63221600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m16-right-initial-lubrication-required-before-use-sku-63221600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M14 right == Initial lubrication required before use == SKU: 63221400](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m14-right-initial-lubrication-required-before-use-sku-63221400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M12 right == Initial lubrication required before use == SKU: 63221200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m12-right-initial-lubrication-required-before-use-sku-63221200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M10 right == Initial lubrication required before use == SKU: 63221000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m10-right-initial-lubrication-required-before-use-sku-63221000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M8 right == Initial lubrication required before use == SKU: 63220800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m8-right-initial-lubrication-required-before-use-sku-63220800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M6 right == Initial lubrication required before use == SKU: 63220600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m6-right-initial-lubrication-required-before-use-sku-63220600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M5 right == Initial lubrication required before use == SKU: 63220500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m5-right-initial-lubrication-required-before-use-sku-63220500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M3 right == Initial lubrication required before use == SKU: 63220300](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m3-right-initial-lubrication-required-before-use-sku-63220300/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K external thread M2 right == Initial lubrication required before use == SKU: 63220200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-external-thread-m2-right-initial-lubrication-required-before-use-sku-63220200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rods end for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 6mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M42x2 left == Initial lubrication required before use == SKU: 63214000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m42x2-left-initial-lubrication-required-before-use-sku-63214000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M36x2 left == Initial lubrication required before use == SKU: 63213500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m36x2-left-initial-lubrication-required-before-use-sku-63213500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M30x2 left == Initial lubrication required before use == SKU: 63213000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m30x2-left-initial-lubrication-required-before-use-sku-63213000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M24x2 left == Initial lubrication required before use == SKU: 63212500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m24x2-left-initial-lubrication-required-before-use-sku-63212500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M20x1.5 left == Initial lubrication required before use == SKU: 63212000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m20x1-5-left-initial-lubrication-required-before-use-sku-63212000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M18x1.5 left == Initial lubrication required before use == SKU: 63211800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m18x1-5-left-initial-lubrication-required-before-use-sku-63211800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M16 left == Initial lubrication required before use == SKU: 63211600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m16-left-initial-lubrication-required-before-use-sku-63211600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M14 left == Initial lubrication required before use == SKU: 63211400](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m14-left-initial-lubrication-required-before-use-sku-63211400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M12 left == Initial lubrication required before use == SKU: 63211200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m12-left-initial-lubrication-required-before-use-sku-63211200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M10 left == Initial lubrication required before use == SKU: 63211000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m10-left-initial-lubrication-required-before-use-sku-63211000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M8 left == Initial lubrication required before use == SKU: 63210800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m8-left-initial-lubrication-required-before-use-sku-63210800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M6 left == Initial lubrication required before use == SKU: 63210600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m6-left-initial-lubrication-required-before-use-sku-63210600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M5 left == Initial lubrication required before use == SKU: 63210500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m5-left-initial-lubrication-required-before-use-sku-63210500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M3 left == Initial lubrication required before use == SKU: 63210300](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m3-left-initial-lubrication-required-before-use-sku-63210300/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M2 left == Initial lubrication required before use == SKU: 63210200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m2-left-initial-lubrication-required-before-use-sku-63210200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M42x2 right == Initial lubrication required before use == SKU: 63204000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m42x2-right-initial-lubrication-required-before-use-sku-63204000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M36x2 right == Initial lubrication required before use == SKU: 63203500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m36x2-right-initial-lubrication-required-before-use-sku-63203500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M30x2 right == Initial lubrication required before use == SKU: 63203000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m30x2-right-initial-lubrication-required-before-use-sku-63203000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M24x2 right == Initial lubrication required before use == SKU: 63202500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m24x2-right-initial-lubrication-required-before-use-sku-63202500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M22x1.5 right == Initial lubrication required before use == SKU: 63202200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m22x1-5-right-initial-lubrication-required-before-use-sku-63202200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M20x1.5 right == Initial lubrication required before use == SKU: 63202000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m20x1-5-right-initial-lubrication-required-before-use-sku-63202000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M18x1.5 right == Initial lubrication required before use == SKU: 63201800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m18x1-5-right-initial-lubrication-required-before-use-sku-63201800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M16 right == Initial lubrication required before use == SKU: 63201600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m16-right-initial-lubrication-required-before-use-sku-63201600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M14 right == Initial lubrication required before use == SKU: 63201400](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m14-right-initial-lubrication-required-before-use-sku-63201400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M12 right == Initial lubrication required before use == SKU: 63201200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m12-right-initial-lubrication-required-before-use-sku-63201200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M10 right == Initial lubrication required before use == SKU: 63201000](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m10-right-initial-lubrication-required-before-use-sku-63201000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M8 right == Initial lubrication required before use == SKU: 63200800](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m8-right-initial-lubrication-required-before-use-sku-63200800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M6 right == Initial lubrication required before use == SKU: 63200600](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m6-right-initial-lubrication-required-before-use-sku-63200600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M5 right == Initial lubrication required before use == SKU: 63200500](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m5-right-initial-lubrication-required-before-use-sku-63200500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M3 right == Initial lubrication required before use == SKU: 63200300](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m3-right-initial-lubrication-required-before-use-sku-63200300/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Rod end GS DIN ISO 12240-4 series K internal thread M2 right == Initial lubrication required before use == SKU: 63200200](https://maedler.in/product/rod-end-gs-din-iso-12240-4-series-k-internal-thread-m2-right-initial-lubrication-required-before-use-sku-63200200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Special brass CuZn40Als. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on high-duty brass. Can be re-lubricated (only from size 5mm). Sliding speed up to 60 m/min. Initial lubrication required before use - [Slip shaft with joints PWR bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 380mm max. length 430mm stainless steel 1.4301 SKU: 63199850N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-380mm-max-length-430mm-stainless-steel-1-4301-sku-63199850n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 355mm max. length 405mm stainless steel 1.4301 SKU: 63199847N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-355mm-max-length-405mm-stainless-steel-1-4301-sku-63199847n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 315mm max. length 365mm stainless steel 1.4301 SKU: 63199840N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-315mm-max-length-365mm-stainless-steel-1-4301-sku-63199840n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 305mm max. length 355mm stainless steel 1.4301 SKU: 63199837N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-305mm-max-length-355mm-stainless-steel-1-4301-sku-63199837n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWR bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 240mm max. length 270mm stainless steel 1.4301 SKU: 63199826N](https://maedler.in/product/slip-shaft-with-joints-pwr-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-240mm-max-length-270mm-stainless-steel-1-4301-sku-63199826n/): Material: Stainless steel 1.4301. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199757N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199757n/): Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199747N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199747n/): Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199732N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199732n/): Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDR DIN 808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199726N](https://maedler.in/product/precision-double-universal-joint-wdr-din-808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199726n/): Material: Stainless steel 1.4301. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques only amount to 90% of the single precision universal joints, stainless. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199257N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199257n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199250N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199250n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199247N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199247n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 20H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199240N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-20h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199240n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199229N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199229n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199226N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199226n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Precision single universal joint WER DIN808 bore 8H7 with keyway DIN 6885-1 tolerance JS9 on both sides stainless steel 1.4301 SKU: 63199216N](https://maedler.in/product/precision-single-universal-joint-wer-din808-bore-8h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-stainless-steel-1-4301-sku-63199216n/): Material: Stainless steel 1.4301 Max. Operating Angle 45°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. These universal joints can be used at speeds up to max. 800 rpm. The torques amount to only about 50% of the standard version WE. At an operating angle of 45° only manual operation is possible. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 30H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 400mm max. length 490mm steel SKU: 63196300N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-30h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-400mm-max-length-490mm-steel-sku-63196300n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 25H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 350mm max. length 435mm steel SKU: 63195000N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-25h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-350mm-max-length-435mm-steel-sku-63195000n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 330mm max. length 430mm steel SKU: 63194700N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-330mm-max-length-430mm-steel-sku-63194700n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 16H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 250mm max. length 320mm steel SKU: 63193200N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-16h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-250mm-max-length-320mm-steel-sku-63193200n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 220mm max. length 270mm steel SKU: 63192500N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-220mm-max-length-270mm-steel-sku-63192500n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PWN with needle bearings bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 170mm max. length 200mm steel SKU: 63192000N](https://maedler.in/product/slip-shaft-with-joints-pwn-with-needle-bearings-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-170mm-max-length-200mm-steel-sku-63192000n/): Material: Steel 35SMnPb10.Max. Operating Angle per Joint 45°. Other lengths on request.With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 22H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 330mm max. length 430mm steel SKU: 63184700N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-22h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-330mm-max-length-430mm-steel-sku-63184700n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 210mm max. length 280mm steel SKU: 63182900N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-14h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-210mm-max-length-280mm-steel-sku-63182900n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Slip shaft with joints PW bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 170mm max. length 230mm steel SKU: 63182000N](https://maedler.in/product/slip-shaft-with-joints-pw-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-min-length-170mm-max-length-230mm-steel-sku-63182000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Spline shaft C40. Max. Operating Angle per Joint 45°. Other lengths on request. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 18H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63173700N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-18h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63173700n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63172600N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-12h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63172600n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WD DIN808 bore 10H7 with keyway DIN 6885-1 tolerance JS9 on both sides steel SKU: 63172000N](https://maedler.in/product/precision-double-universal-joint-wd-din808-bore-10h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-steel-sku-63172000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. These single and double universal joints feature a simple design with very small tolerances and high precision and performance. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - this guarantees an extremely long service life. All contact surfaces are hardened, ground and lapped. These universal joints are used at high torques and high speeds up to max. 800 rpm. With keyway DIN 6885-1, on both sides. - [Precision double universal joint WDN with needle bearing DIN808 bore 40H7 with keyway DIN 6885-1 tolerance JS9 on both sides SKU: 63168000N](https://maedler.in/product/precision-double-universal-joint-wdn-with-needle-bearing-din808-bore-40h7-with-keyway-din-6885-1-tolerance-js9-on-both-sides-sku-63168000n/): Material: Steel 35SMnPb10. Bearing parts 18NiCrMo5Pb. Max. Operating Angle 90°. The needle-bearing universal joints have almost zero backlash, high accuracy and good turning properties. These special needle-rollers without cage can take high loads even at large operating angles. A special grinding process realizes a perfect parallelism of the axes and the single parts of the joints - which guarantees an extremely long service life. With keyway DIN 6885-1, on both sides. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 3 M17x1 SKU: 65398537](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-3-m17x1-sku-65398537/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 2 M15x1 SKU: 65398534](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-2-m15x1-sku-65398534/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 1 M12x1 SKU: 65398532](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-1-m12x1-sku-65398532/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 0 M10x0,75 SKU: 65398530](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-0-m10x075-sku-65398530/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMT-R 10 material 1.4301 M50x1.5 SKU: 65398010](https://maedler.in/product/locknut-kmt-r-10-material-1-4301-m50x1-5-sku-65398010/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 9 material 1.4301 M45x1.5 SKU: 65398009](https://maedler.in/product/locknut-kmt-r-9-material-1-4301-m45x1-5-sku-65398009/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 8 material 1.4301 M40x1.5 SKU: 65398008](https://maedler.in/product/locknut-kmt-r-8-material-1-4301-m40x1-5-sku-65398008/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 7 material 1.4301 M35x1.5 SKU: 65398007](https://maedler.in/product/locknut-kmt-r-7-material-1-4301-m35x1-5-sku-65398007/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 6 material 1.4301 M30x1.5 SKU: 65398006](https://maedler.in/product/locknut-kmt-r-6-material-1-4301-m30x1-5-sku-65398006/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 5 material 1.4301 M25x1.5 SKU: 65398005](https://maedler.in/product/locknut-kmt-r-5-material-1-4301-m25x1-5-sku-65398005/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 4 material 1.4301 M20x1 SKU: 65398004](https://maedler.in/product/locknut-kmt-r-4-material-1-4301-m20x1-sku-65398004/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 3 material 1.4301 M17x1 SKU: 65398003](https://maedler.in/product/locknut-kmt-r-3-material-1-4301-m17x1-sku-65398003/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 2 material 1.4301 M15x1 SKU: 65398002](https://maedler.in/product/locknut-kmt-r-2-material-1-4301-m15x1-sku-65398002/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 1 material 1.4301 M12x1 SKU: 65398001](https://maedler.in/product/locknut-kmt-r-1-material-1-4301-m12x1-sku-65398001/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut KMT-R 0 material 1.4301 M10x0.75 SKU: 65398000](https://maedler.in/product/locknut-kmt-r-0-material-1-4301-m10x0-75-sku-65398000/): Material: Body of the nut stainless steel 1.4301 (AISI 304).Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. Slotnut-design. With two additional wrench flats. KMT-R-Locknuts are designed for applications, which require a high precision and trustable locking.1) Fastening torque of locking screw. - [Locknut DIN 981 KM20 M100x2 zinc plated SKU: 65388690](https://maedler.in/product/locknut-din-981-km20-m100x2-zinc-plated-sku-65388690/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM19 M95x2 zinc plated SKU: 65388687](https://maedler.in/product/locknut-din-981-km19-m95x2-zinc-plated-sku-65388687/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM18 M90x2 zinc plated SKU: 65388685](https://maedler.in/product/locknut-din-981-km18-m90x2-zinc-plated-sku-65388685/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM17 M85x2 zinc plated SKU: 65388683](https://maedler.in/product/locknut-din-981-km17-m85x2-zinc-plated-sku-65388683/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM16 M80x2 zinc plated SKU: 65388680](https://maedler.in/product/locknut-din-981-km16-m80x2-zinc-plated-sku-65388680/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM15 M75x2 zinc plated SKU: 65388678](https://maedler.in/product/locknut-din-981-km15-m75x2-zinc-plated-sku-65388678/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM14 M70x2 zinc plated SKU: 65388675](https://maedler.in/product/locknut-din-981-km14-m70x2-zinc-plated-sku-65388675/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM13 M65x2 zinc plated SKU: 65388673](https://maedler.in/product/locknut-din-981-km13-m65x2-zinc-plated-sku-65388673/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM12 M60x2 zinc plated SKU: 65388671](https://maedler.in/product/locknut-din-981-km12-m60x2-zinc-plated-sku-65388671/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM11 M55x2 zinc plated SKU: 65388668](https://maedler.in/product/locknut-din-981-km11-m55x2-zinc-plated-sku-65388668/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM10 M50x1,5 zinc plated SKU: 65388665](https://maedler.in/product/locknut-din-981-km10-m50x15-zinc-plated-sku-65388665/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM9 M45x1,5 zinc plated SKU: 65388662](https://maedler.in/product/locknut-din-981-km9-m45x15-zinc-plated-sku-65388662/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 40 thread M200x3 zinc plated SKU: 65388659](https://maedler.in/product/locknut-din-981-km-40-thread-m200x3-zinc-plated-sku-65388659/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM8 M40x1,5 zinc plated SKU: 65388658](https://maedler.in/product/locknut-din-981-km8-m40x15-zinc-plated-sku-65388658/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 38 thread M190x3 zinc plated SKU: 65388657](https://maedler.in/product/locknut-din-981-km-38-thread-m190x3-zinc-plated-sku-65388657/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 36 thread M180x3 zinc plated SKU: 65388656](https://maedler.in/product/locknut-din-981-km-36-thread-m180x3-zinc-plated-sku-65388656/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 34 thread M170x3 zinc plated SKU: 65388655](https://maedler.in/product/locknut-din-981-km-34-thread-m170x3-zinc-plated-sku-65388655/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 33 thread M165x3 zinc plated SKU: 65388654](https://maedler.in/product/locknut-din-981-km-33-thread-m165x3-zinc-plated-sku-65388654/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM7 M35x1,5 zinc plated SKU: 65388653](https://maedler.in/product/locknut-din-981-km7-m35x15-zinc-plated-sku-65388653/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 32 thread M160x3 zinc plated SKU: 65388652](https://maedler.in/product/locknut-din-981-km-32-thread-m160x3-zinc-plated-sku-65388652/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 31 thread M155x3 zinc plated SKU: 65388651](https://maedler.in/product/locknut-din-981-km-31-thread-m155x3-zinc-plated-sku-65388651/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 30 thread M150x2 zinc plated SKU: 65388650](https://maedler.in/product/locknut-din-981-km-30-thread-m150x2-zinc-plated-sku-65388650/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM6 M30x1,5 zinc plated SKU: 65388648](https://maedler.in/product/locknut-din-981-km6-m30x15-zinc-plated-sku-65388648/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 28 thread M140x2 zinc plated SKU: 65388647](https://maedler.in/product/locknut-din-981-km-28-thread-m140x2-zinc-plated-sku-65388647/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 27 thread M135x2 zinc plated SKU: 65388646](https://maedler.in/product/locknut-din-981-km-27-thread-m135x2-zinc-plated-sku-65388646/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 26 thread M130x2 zinc plated SKU: 65388645](https://maedler.in/product/locknut-din-981-km-26-thread-m130x2-zinc-plated-sku-65388645/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM5 M25x1,5 zinc plated SKU: 65388644](https://maedler.in/product/locknut-din-981-km5-m25x15-zinc-plated-sku-65388644/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 25 thread M125x2 zinc plated SKU: 65388643](https://maedler.in/product/locknut-din-981-km-25-thread-m125x2-zinc-plated-sku-65388643/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 24 thread M120x2 zinc plated SKU: 65388642](https://maedler.in/product/locknut-din-981-km-24-thread-m120x2-zinc-plated-sku-65388642/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 23 thread M115x2 zinc plated SKU: 65388641](https://maedler.in/product/locknut-din-981-km-23-thread-m115x2-zinc-plated-sku-65388641/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM4 M20x1 zinc plated SKU: 65388640](https://maedler.in/product/locknut-din-981-km4-m20x1-zinc-plated-sku-65388640/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 22 thread M110x2 zinc plated SKU: 65388639](https://maedler.in/product/locknut-din-981-km-22-thread-m110x2-zinc-plated-sku-65388639/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 21 thread M105x2 zinc plated SKU: 65388638](https://maedler.in/product/locknut-din-981-km-21-thread-m105x2-zinc-plated-sku-65388638/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM3 M17x1 zinc plated SKU: 65388637](https://maedler.in/product/locknut-din-981-km3-m17x1-zinc-plated-sku-65388637/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM2 M15x1 zinc plated SKU: 65388634](https://maedler.in/product/locknut-din-981-km2-m15x1-zinc-plated-sku-65388634/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM1 M12x1 zinc plated SKU: 65388632](https://maedler.in/product/locknut-din-981-km1-m12x1-zinc-plated-sku-65388632/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM0 M10x0,75 zinc plated SKU: 65388630](https://maedler.in/product/locknut-din-981-km0-m10x075-zinc-plated-sku-65388630/): Material: Steel zinc-plated, Strength min. 350 N/mm2.These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M95x1,5 zinc plated SKU: 65388529](https://maedler.in/product/locknut-din-70852-m95x15-zinc-plated-sku-65388529/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M90x1,5 zinc plated SKU: 65388528](https://maedler.in/product/locknut-din-70852-m90x15-zinc-plated-sku-65388528/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M85x1,5 zinc plated SKU: 65388527](https://maedler.in/product/locknut-din-70852-m85x15-zinc-plated-sku-65388527/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M80x1,5 zinc plated SKU: 65388526](https://maedler.in/product/locknut-din-70852-m80x15-zinc-plated-sku-65388526/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M75x1,5 zinc plated SKU: 65388525](https://maedler.in/product/locknut-din-70852-m75x15-zinc-plated-sku-65388525/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M70x1,5 zinc plated SKU: 65388524](https://maedler.in/product/locknut-din-70852-m70x15-zinc-plated-sku-65388524/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M65x1,5 zinc plated SKU: 65388523](https://maedler.in/product/locknut-din-70852-m65x15-zinc-plated-sku-65388523/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M60x1,5 zinc plated SKU: 65388522](https://maedler.in/product/locknut-din-70852-m60x15-zinc-plated-sku-65388522/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M55x1,5 zinc plated SKU: 65388521](https://maedler.in/product/locknut-din-70852-m55x15-zinc-plated-sku-65388521/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M52x1,5 zinc plated SKU: 65388520](https://maedler.in/product/locknut-din-70852-m52x15-zinc-plated-sku-65388520/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M50x1,5 zinc plated SKU: 65388519](https://maedler.in/product/locknut-din-70852-m50x15-zinc-plated-sku-65388519/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M48x1,5 zinc plated SKU: 65388518](https://maedler.in/product/locknut-din-70852-m48x15-zinc-plated-sku-65388518/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M45x1,5 zinc plated SKU: 65388517](https://maedler.in/product/locknut-din-70852-m45x15-zinc-plated-sku-65388517/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M42x1,5 zinc plated SKU: 65388516](https://maedler.in/product/locknut-din-70852-m42x15-zinc-plated-sku-65388516/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M40x1,5 zinc plated SKU: 65388515](https://maedler.in/product/locknut-din-70852-m40x15-zinc-plated-sku-65388515/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M38x1,5 zinc plated SKU: 65388514](https://maedler.in/product/locknut-din-70852-m38x15-zinc-plated-sku-65388514/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M35x1,5 zinc plated SKU: 65388513](https://maedler.in/product/locknut-din-70852-m35x15-zinc-plated-sku-65388513/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M32x1,5 zinc plated SKU: 65388512](https://maedler.in/product/locknut-din-70852-m32x15-zinc-plated-sku-65388512/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M30x1,5 zinc plated SKU: 65388511](https://maedler.in/product/locknut-din-70852-m30x15-zinc-plated-sku-65388511/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M28x1,5 zinc plated SKU: 65388510](https://maedler.in/product/locknut-din-70852-m28x15-zinc-plated-sku-65388510/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M26x1,5 zinc plated SKU: 65388509](https://maedler.in/product/locknut-din-70852-m26x15-zinc-plated-sku-65388509/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M24x1,5 zinc plated SKU: 65388508](https://maedler.in/product/locknut-din-70852-m24x15-zinc-plated-sku-65388508/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M22x1,5 zinc plated SKU: 65388507](https://maedler.in/product/locknut-din-70852-m22x15-zinc-plated-sku-65388507/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M20x1,5 zinc plated SKU: 65388506](https://maedler.in/product/locknut-din-70852-m20x15-zinc-plated-sku-65388506/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M18x1,5 zinc plated SKU: 65388505](https://maedler.in/product/locknut-din-70852-m18x15-zinc-plated-sku-65388505/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M16x1,5 zinc plated SKU: 65388504](https://maedler.in/product/locknut-din-70852-m16x15-zinc-plated-sku-65388504/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M14x1,5 zinc plated SKU: 65388503](https://maedler.in/product/locknut-din-70852-m14x15-zinc-plated-sku-65388503/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M12x1,5 zinc plated SKU: 65388502](https://maedler.in/product/locknut-din-70852-m12x15-zinc-plated-sku-65388502/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M10x1 zinc plated SKU: 65388501](https://maedler.in/product/locknut-din-70852-m10x1-zinc-plated-sku-65388501/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M100x1,5 zinc plated SKU: 65388500](https://maedler.in/product/locknut-din-70852-m100x15-zinc-plated-sku-65388500/): Material: Steel, zinc-plated. Hardness class 17 H according to DIN 267-24. These nuts are used for unsafed, quickly to loosen applications, or for a secured connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Turnbuckle DIN 1480 with 2 plane ends and hexagon nut on right thread thread M20 material S235 galvanized SKU: 65388420](https://maedler.in/product/turnbuckle-din-1480-with-2-plane-ends-and-hexagon-nut-on-right-thread-thread-m20-material-s235-galvanized-sku-65388420/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 plane ends (flat leaf bolts). One side right-hand thread, other side left-hand thread. With counter nut on the right-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 plane ends and hexagon nut on right thread thread M16 material S235 galvanized SKU: 65388416](https://maedler.in/product/turnbuckle-din-1480-with-2-plane-ends-and-hexagon-nut-on-right-thread-thread-m16-material-s235-galvanized-sku-65388416/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 plane ends (flat leaf bolts). One side right-hand thread, other side left-hand thread. With counter nut on the right-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 plane ends and hexagon nut on right thread thread M12 material S235 galvanized SKU: 65388412](https://maedler.in/product/turnbuckle-din-1480-with-2-plane-ends-and-hexagon-nut-on-right-thread-thread-m12-material-s235-galvanized-sku-65388412/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 plane ends (flat leaf bolts). One side right-hand thread, other side left-hand thread. With counter nut on the right-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 plane ends and hexagon nut on right thread thread M10 material S235 galvanized SKU: 65388410](https://maedler.in/product/turnbuckle-din-1480-with-2-plane-ends-and-hexagon-nut-on-right-thread-thread-m10-material-s235-galvanized-sku-65388410/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 plane ends (flat leaf bolts). One side right-hand thread, other side left-hand thread. With counter nut on the right-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 plane ends and hexagon nut on right thread thread M8 material S235 galvanized SKU: 65388408](https://maedler.in/product/turnbuckle-din-1480-with-2-plane-ends-and-hexagon-nut-on-right-thread-thread-m8-material-s235-galvanized-sku-65388408/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 plane ends (flat leaf bolts). One side right-hand thread, other side left-hand thread. With counter nut on the right-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 hooks thread M20 material S235 galvanized SKU: 65388320](https://maedler.in/product/turnbuckle-din-1480-with-2-hooks-thread-m20-material-s235-galvanized-sku-65388320/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 hook screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 hooks thread M16 material S235 galvanized SKU: 65388316](https://maedler.in/product/turnbuckle-din-1480-with-2-hooks-thread-m16-material-s235-galvanized-sku-65388316/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 hook screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 hooks thread M12 material S235 galvanized SKU: 65388312](https://maedler.in/product/turnbuckle-din-1480-with-2-hooks-thread-m12-material-s235-galvanized-sku-65388312/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 hook screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 hooks thread M10 material S235 galvanized SKU: 65388310](https://maedler.in/product/turnbuckle-din-1480-with-2-hooks-thread-m10-material-s235-galvanized-sku-65388310/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 hook screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 hooks thread M8 material S235 galvanized SKU: 65388308](https://maedler.in/product/turnbuckle-din-1480-with-2-hooks-thread-m8-material-s235-galvanized-sku-65388308/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 hook screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 hooks thread M6 material S235 galvanized SKU: 65388306](https://maedler.in/product/turnbuckle-din-1480-with-2-hooks-thread-m6-material-s235-galvanized-sku-65388306/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 hook screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 eyes thread M20 material S235 galvanized SKU: 65388220](https://maedler.in/product/turnbuckle-din-1480-with-2-eyes-thread-m20-material-s235-galvanized-sku-65388220/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 eyelet screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 eyes thread M16 material S235 galvanized SKU: 65388216](https://maedler.in/product/turnbuckle-din-1480-with-2-eyes-thread-m16-material-s235-galvanized-sku-65388216/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 eyelet screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 eyes thread M12 material S235 galvanized SKU: 65388212](https://maedler.in/product/turnbuckle-din-1480-with-2-eyes-thread-m12-material-s235-galvanized-sku-65388212/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 eyelet screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 eyes thread M10 material S235 galvanized SKU: 65388210](https://maedler.in/product/turnbuckle-din-1480-with-2-eyes-thread-m10-material-s235-galvanized-sku-65388210/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 eyelet screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 eyes thread M8 material S235 galvanized SKU: 65388208](https://maedler.in/product/turnbuckle-din-1480-with-2-eyes-thread-m8-material-s235-galvanized-sku-65388208/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 eyelet screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with 2 eyes thread M6 material S235 galvanized SKU: 65388206](https://maedler.in/product/turnbuckle-din-1480-with-2-eyes-thread-m6-material-s235-galvanized-sku-65388206/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with 2 eyelet screws. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Turnbuckle DIN 1480 with hook and eye thread M20 material S235 galvanized SKU: 65388120](https://maedler.in/product/turnbuckle-din-1480-with-hook-and-eye-thread-m20-material-s235-galvanized-sku-65388120/): Material: Steel S235, galvanic zinc-plated. Turnbuckle DIN 1480, with hook and eye. One side right-hand thread, other side left-hand thread. The nut dimensions are standardized. The dimensions of the fastening elements are approximate, subject to change. - [Rod end BR-R DIN 12240-4 series K internal tread M12 right with spherical ball bearing stainless SKU: 63299412](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m12-right-with-spherical-ball-bearing-stainless-sku-63299412/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M10 right with spherical ball bearing stainless SKU: 63299410](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m10-right-with-spherical-ball-bearing-stainless-sku-63299410/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M8 right with spherical ball bearing stainless SKU: 63299408](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m8-right-with-spherical-ball-bearing-stainless-sku-63299408/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M6 right with spherical ball bearing stainless SKU: 63299406](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m6-right-with-spherical-ball-bearing-stainless-sku-63299406/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end GT DIN ISO 12240-4 series K external thread M42x2 left maintenance-free SKU: 63294000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m42x2-left-maintenance-free-sku-63294000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M36x2 left maintenance-free SKU: 63293500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m36x2-left-maintenance-free-sku-63293500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M30x2 left maintenance-free SKU: 63293000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m30x2-left-maintenance-free-sku-63293000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M24x2 left maintenance-free SKU: 63292500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m24x2-left-maintenance-free-sku-63292500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M22x1.5 left maintenance-free SKU: 63292200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m22x1-5-left-maintenance-free-sku-63292200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M20x1.5 left maintenance-free SKU: 63292000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m20x1-5-left-maintenance-free-sku-63292000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M18x1.5 left maintenance-free SKU: 63291800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m18x1-5-left-maintenance-free-sku-63291800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M16 left maintenance-free SKU: 63291600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m16-left-maintenance-free-sku-63291600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M14 left maintenance-free SKU: 63291400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m14-left-maintenance-free-sku-63291400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M12 left maintenance-free SKU: 63291200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m12-left-maintenance-free-sku-63291200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M10 left maintenance-free SKU: 63291000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m10-left-maintenance-free-sku-63291000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M8 left maintenance-free SKU: 63290800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m8-left-maintenance-free-sku-63290800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M6 left maintenance-free SKU: 63290600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m6-left-maintenance-free-sku-63290600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M5 left maintenance-free SKU: 63290500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m5-left-maintenance-free-sku-63290500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M4 left maintenance-free SKU: 63290400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m4-left-maintenance-free-sku-63290400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M42x2 right maintenance-free SKU: 63284000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m42x2-right-maintenance-free-sku-63284000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M36x2 right maintenance-free SKU: 63283500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m36x2-right-maintenance-free-sku-63283500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M30x2 right maintenance-free SKU: 63283000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m30x2-right-maintenance-free-sku-63283000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M24x2 right maintenance-free SKU: 63282500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m24x2-right-maintenance-free-sku-63282500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M22x1.5 right maintenance-free SKU: 63282200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m22x1-5-right-maintenance-free-sku-63282200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M20x1.5 right maintenance-free SKU: 63282000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m20x1-5-right-maintenance-free-sku-63282000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M18x1.5 right maintenance-free SKU: 63281800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m18x1-5-right-maintenance-free-sku-63281800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M16 right maintenance-free SKU: 63281600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m16-right-maintenance-free-sku-63281600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M14 right maintenance-free SKU: 63281400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m14-right-maintenance-free-sku-63281400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M12 right maintenance-free SKU: 63281200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m12-right-maintenance-free-sku-63281200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M10 right maintenance-free SKU: 63281000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m10-right-maintenance-free-sku-63281000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M8 right maintenance-free SKU: 63280800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m8-right-maintenance-free-sku-63280800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M6 right maintenance-free SKU: 63280600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m6-right-maintenance-free-sku-63280600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M5 right maintenance-free SKU: 63280500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m5-right-maintenance-free-sku-63280500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K external thread M4 right maintenance-free SKU: 63280400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-external-thread-m4-right-maintenance-free-sku-63280400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M42x2 left maintenance-free SKU: 63274000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m42x2-left-maintenance-free-sku-63274000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M36x2 left maintenance-free SKU: 63273500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m36x2-left-maintenance-free-sku-63273500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M30x2 left maintenance-free SKU: 63273000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m30x2-left-maintenance-free-sku-63273000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free SKU: 63272500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m24x2-left-maintenance-free-sku-63272500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M22x1.5 left maintenance-free SKU: 63272200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m22x1-5-left-maintenance-free-sku-63272200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M20x1.5 left maintenance-free SKU: 63272000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m20x1-5-left-maintenance-free-sku-63272000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M18x1.5 left maintenance-free SKU: 63271800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m18x1-5-left-maintenance-free-sku-63271800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M16 left maintenance-free SKU: 63271600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m16-left-maintenance-free-sku-63271600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M14 left maintenance-free SKU: 63271400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m14-left-maintenance-free-sku-63271400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M12 left maintenance-free SKU: 63271200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m12-left-maintenance-free-sku-63271200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M10 left maintenance-free SKU: 63271000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m10-left-maintenance-free-sku-63271000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M8 left maintenance-free SKU: 63270800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m8-left-maintenance-free-sku-63270800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M6 left maintenance-free SKU: 63270600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m6-left-maintenance-free-sku-63270600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M5 left maintenance-free SKU: 63270500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m5-left-maintenance-free-sku-63270500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M4 left maintenance-free SKU: 63270400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m4-left-maintenance-free-sku-63270400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M42x2 right maintenance-free SKU: 63264000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m42x2-right-maintenance-free-sku-63264000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M36x2 right maintenance-free SKU: 63263500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m36x2-right-maintenance-free-sku-63263500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M30x2 right maintenance-free SKU: 63263000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m30x2-right-maintenance-free-sku-63263000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free SKU: 63262500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m24x2-right-maintenance-free-sku-63262500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M22x1.5 right maintenance-free SKU: 63262200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m22x1-5-right-maintenance-free-sku-63262200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M20x1.5 right maintenance-free SKU: 63262000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m20x1-5-right-maintenance-free-sku-63262000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M18x1.5 right maintenance-free SKU: 63261800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m18x1-5-right-maintenance-free-sku-63261800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M16 right maintenance-free SKU: 63261600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m16-right-maintenance-free-sku-63261600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M14 right maintenance-free SKU: 63261400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m14-right-maintenance-free-sku-63261400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M12 right maintenance-free SKU: 63261200](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m12-right-maintenance-free-sku-63261200/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M10 right maintenance-free SKU: 63261000](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m10-right-maintenance-free-sku-63261000/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M8 right maintenance-free SKU: 63260800](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m8-right-maintenance-free-sku-63260800/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M6 right maintenance-free SKU: 63260600](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m6-right-maintenance-free-sku-63260600/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M5 right maintenance-free SKU: 63260500](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m5-right-maintenance-free-sku-63260500/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end GT DIN ISO 12240-4 series K internal thread M4 right maintenance-free SKU: 63260400](https://maedler.in/product/rod-end-gt-din-iso-12240-4-series-k-internal-thread-m4-right-maintenance-free-sku-63260400/): Material: Outer part: Zinc-plated. Boreholes up to 12mm: free-cutting steel, turned. From boreholes 14mm: Steel C22, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-free. Sliding speed up to 10 m/min. - [Rod end BR DIN ISO 12240-4 series K external tread M30x2 left with spherical ball bearing SKU: 63258000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m30x2-left-with-spherical-ball-bearing-sku-63258000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M24x2 left with spherical ball bearing SKU: 63257500](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m24x2-left-with-spherical-ball-bearing-sku-63257500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M22x1.5 left with spherical ball bearing SKU: 63257200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m22x1-5-left-with-spherical-ball-bearing-sku-63257200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M20x1.5 left with spherical ball bearing SKU: 63257000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m20x1-5-left-with-spherical-ball-bearing-sku-63257000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M18x1.5 left with spherical ball bearing SKU: 63256800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m18x1-5-left-with-spherical-ball-bearing-sku-63256800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M16 left with spherical ball bearing SKU: 63256600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m16-left-with-spherical-ball-bearing-sku-63256600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M14 left with spherical ball bearing SKU: 63256400](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m14-left-with-spherical-ball-bearing-sku-63256400/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M12 left with spherical ball bearing SKU: 63256200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m12-left-with-spherical-ball-bearing-sku-63256200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M10 left with spherical ball bearing SKU: 63256000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m10-left-with-spherical-ball-bearing-sku-63256000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M8 left with spherical ball bearing SKU: 63255800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m8-left-with-spherical-ball-bearing-sku-63255800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M6 left with spherical ball bearing SKU: 63255600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m6-left-with-spherical-ball-bearing-sku-63255600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M30x2 right with spherical ball bearing SKU: 63253000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m30x2-right-with-spherical-ball-bearing-sku-63253000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M24x2 right with spherical ball bearing SKU: 63252500](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m24x2-right-with-spherical-ball-bearing-sku-63252500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M22x1.5 right with spherical ball bearing SKU: 63252200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m22x1-5-right-with-spherical-ball-bearing-sku-63252200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M20x1.5 right with spherical ball bearing SKU: 63252000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m20x1-5-right-with-spherical-ball-bearing-sku-63252000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M18x1.5 right with spherical ball bearing SKU: 63251800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m18x1-5-right-with-spherical-ball-bearing-sku-63251800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M16 right with spherical ball bearing SKU: 63251600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m16-right-with-spherical-ball-bearing-sku-63251600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M14 right with spherical ball bearing SKU: 63251400](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m14-right-with-spherical-ball-bearing-sku-63251400/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M12 right with spherical ball bearing SKU: 63251200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m12-right-with-spherical-ball-bearing-sku-63251200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M10 right with spherical ball bearing SKU: 63251000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m10-right-with-spherical-ball-bearing-sku-63251000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M8 right with spherical ball bearing SKU: 63250800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m8-right-with-spherical-ball-bearing-sku-63250800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K external tread M6 right with spherical ball bearing SKU: 63250600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-external-tread-m6-right-with-spherical-ball-bearing-sku-63250600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M30x2 left with spherical ball bearing SKU: 63248000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m30x2-left-with-spherical-ball-bearing-sku-63248000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M24x2 left with spherical ball bearing SKU: 63247500](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m24x2-left-with-spherical-ball-bearing-sku-63247500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M22x1.5 left with spherical ball bearing SKU: 63247200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m22x1-5-left-with-spherical-ball-bearing-sku-63247200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M20x1.5 left with spherical ball bearing SKU: 63247000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m20x1-5-left-with-spherical-ball-bearing-sku-63247000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M18x1.5 left with spherical ball bearing SKU: 63246800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m18x1-5-left-with-spherical-ball-bearing-sku-63246800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M16 left with spherical ball bearing SKU: 63246600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m16-left-with-spherical-ball-bearing-sku-63246600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M14 left with spherical ball bearing SKU: 63246400](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m14-left-with-spherical-ball-bearing-sku-63246400/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M12 left with spherical ball bearing SKU: 63246200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m12-left-with-spherical-ball-bearing-sku-63246200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M10 left with spherical ball bearing SKU: 63246000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m10-left-with-spherical-ball-bearing-sku-63246000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M8 left with spherical ball bearing SKU: 63245800](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m8-left-with-spherical-ball-bearing-sku-63245800/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M6 left with spherical ball bearing SKU: 63245600](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m6-left-with-spherical-ball-bearing-sku-63245600/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M30x2 right with spherical ball bearing SKU: 63243000](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m30x2-right-with-spherical-ball-bearing-sku-63243000/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M24x2 right with spherical ball bearing SKU: 63242500](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m24x2-right-with-spherical-ball-bearing-sku-63242500/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR DIN ISO 12240-4 series K internal thread M22x1.5 right with spherical ball bearing SKU: 63242200](https://maedler.in/product/rod-end-br-din-iso-12240-4-series-k-internal-thread-m22x1-5-right-with-spherical-ball-bearing-sku-63242200/): Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Thread rolled., Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Locknut DIN 981 KM 18 thread M90x2 stainless steel 1.4301 (AISI304) SKU: 65399685](https://maedler.in/product/locknut-din-981-km-18-thread-m90x2-stainless-steel-1-4301-aisi304-sku-65399685/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 17 thread M85x2 stainless steel 1.4301 (AISI304) SKU: 65399683](https://maedler.in/product/locknut-din-981-km-17-thread-m85x2-stainless-steel-1-4301-aisi304-sku-65399683/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 16 thread M80x2 stainless steel 1.4301 (AISI304) SKU: 65399680](https://maedler.in/product/locknut-din-981-km-16-thread-m80x2-stainless-steel-1-4301-aisi304-sku-65399680/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 15 thread M75x2 stainless steel 1.4301 (AISI304) SKU: 65399678](https://maedler.in/product/locknut-din-981-km-15-thread-m75x2-stainless-steel-1-4301-aisi304-sku-65399678/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 14 thread M70x2 stainless steel 1.4301 (AISI304) SKU: 65399675](https://maedler.in/product/locknut-din-981-km-14-thread-m70x2-stainless-steel-1-4301-aisi304-sku-65399675/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 13 thread M65x2 stainless steel 1.4301 (AISI304) SKU: 65399673](https://maedler.in/product/locknut-din-981-km-13-thread-m65x2-stainless-steel-1-4301-aisi304-sku-65399673/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 12 thread M60x2 stainless steel 1.4301 (AISI304) SKU: 65399671](https://maedler.in/product/locknut-din-981-km-12-thread-m60x2-stainless-steel-1-4301-aisi304-sku-65399671/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 11 thread M55x2 stainless steel 1.4301 (AISI304) SKU: 65399668](https://maedler.in/product/locknut-din-981-km-11-thread-m55x2-stainless-steel-1-4301-aisi304-sku-65399668/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 10 thread M50x1.5 stainless steel 1.4301 (AISI304) SKU: 65399665](https://maedler.in/product/locknut-din-981-km-10-thread-m50x1-5-stainless-steel-1-4301-aisi304-sku-65399665/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 9 thread M45x1.5 stainless steel 1.4301 (AISI304) SKU: 65399662](https://maedler.in/product/locknut-din-981-km-9-thread-m45x1-5-stainless-steel-1-4301-aisi304-sku-65399662/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 8 thread M40x1.5 stainless steel 1.4301 (AISI304) SKU: 65399658](https://maedler.in/product/locknut-din-981-km-8-thread-m40x1-5-stainless-steel-1-4301-aisi304-sku-65399658/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 7 thread M35x1.5 stainless steel 1.4301 (AISI304) SKU: 65399653](https://maedler.in/product/locknut-din-981-km-7-thread-m35x1-5-stainless-steel-1-4301-aisi304-sku-65399653/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 6 thread M30x1.5 stainless steel 1.4301 (AISI304) SKU: 65399648](https://maedler.in/product/locknut-din-981-km-6-thread-m30x1-5-stainless-steel-1-4301-aisi304-sku-65399648/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 5 thread M25x1.5 stainless steel 1.4301 (AISI304) SKU: 65399644](https://maedler.in/product/locknut-din-981-km-5-thread-m25x1-5-stainless-steel-1-4301-aisi304-sku-65399644/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 4 thread M20x1 stainless steel 1.4301 (AISI304) SKU: 65399640](https://maedler.in/product/locknut-din-981-km-4-thread-m20x1-stainless-steel-1-4301-aisi304-sku-65399640/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 3 thread M17x1 stainless steel 1.4301 (AISI304) SKU: 65399637](https://maedler.in/product/locknut-din-981-km-3-thread-m17x1-stainless-steel-1-4301-aisi304-sku-65399637/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 2 thread M15x1 stainless steel 1.4301 (AISI304) SKU: 65399634](https://maedler.in/product/locknut-din-981-km-2-thread-m15x1-stainless-steel-1-4301-aisi304-sku-65399634/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 1 thread M12x1 stainless steel 1.4301 (AISI304) SKU: 65399632](https://maedler.in/product/locknut-din-981-km-1-thread-m12x1-stainless-steel-1-4301-aisi304-sku-65399632/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 0 thread M10x0.75 stainless steel 1.4301 (AISI304) SKU: 65399630](https://maedler.in/product/locknut-din-981-km-0-thread-m10x0-75-stainless-steel-1-4301-aisi304-sku-65399630/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Lockwasher DIN 5406 Type MB 20 inner diameter 100mm stainless steel 1.4301 (AISI 304) SKU: 65399590](https://maedler.in/product/lockwasher-din-5406-type-mb-20-inner-diameter-100mm-stainless-steel-1-4301-aisi-304-sku-65399590/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 19 inner diameter 95mm stainless steel 1.4301 (AISI 304) SKU: 65399587](https://maedler.in/product/lockwasher-din-5406-type-mb-19-inner-diameter-95mm-stainless-steel-1-4301-aisi-304-sku-65399587/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 18 inner diameter 90mm stainless steel 1.4301 (AISI 304) SKU: 65399585](https://maedler.in/product/lockwasher-din-5406-type-mb-18-inner-diameter-90mm-stainless-steel-1-4301-aisi-304-sku-65399585/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 17 inner diameter 85mm stainless steel 1.4301 (AISI 304) SKU: 65399583](https://maedler.in/product/lockwasher-din-5406-type-mb-17-inner-diameter-85mm-stainless-steel-1-4301-aisi-304-sku-65399583/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 16 inner diameter 80mm stainless steel 1.4301 (AISI 304) SKU: 65399580](https://maedler.in/product/lockwasher-din-5406-type-mb-16-inner-diameter-80mm-stainless-steel-1-4301-aisi-304-sku-65399580/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 15 inner diameter 75mm stainless steel 1.4301 (AISI 304) SKU: 65399578](https://maedler.in/product/lockwasher-din-5406-type-mb-15-inner-diameter-75mm-stainless-steel-1-4301-aisi-304-sku-65399578/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 14 inner diameter 70mm stainless steel 1.4301 (AISI 304) SKU: 65399575](https://maedler.in/product/lockwasher-din-5406-type-mb-14-inner-diameter-70mm-stainless-steel-1-4301-aisi-304-sku-65399575/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 13 inner diameter 65mm stainless steel 1.4301 (AISI 304) SKU: 65399573](https://maedler.in/product/lockwasher-din-5406-type-mb-13-inner-diameter-65mm-stainless-steel-1-4301-aisi-304-sku-65399573/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 12 inner diameter 60mm stainless steel 1.4301 (AISI 304) SKU: 65399571](https://maedler.in/product/lockwasher-din-5406-type-mb-12-inner-diameter-60mm-stainless-steel-1-4301-aisi-304-sku-65399571/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 11 inner diameter 55mm stainless steel 1.4301 (AISI 304) SKU: 65399568](https://maedler.in/product/lockwasher-din-5406-type-mb-11-inner-diameter-55mm-stainless-steel-1-4301-aisi-304-sku-65399568/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 10 inner diameter 50mm stainless steel 1.4301 (AISI 304) SKU: 65399565](https://maedler.in/product/lockwasher-din-5406-type-mb-10-inner-diameter-50mm-stainless-steel-1-4301-aisi-304-sku-65399565/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 9 inner diameter 45mm stainless steel 1.4301 (AISI 304) SKU: 65399562](https://maedler.in/product/lockwasher-din-5406-type-mb-9-inner-diameter-45mm-stainless-steel-1-4301-aisi-304-sku-65399562/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 8 inner diameter 40mm stainless steel 1.4301 (AISI 304) SKU: 65399558](https://maedler.in/product/lockwasher-din-5406-type-mb-8-inner-diameter-40mm-stainless-steel-1-4301-aisi-304-sku-65399558/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 7 inner diameter 35mm stainless steel 1.4301 (AISI 304) SKU: 65399553](https://maedler.in/product/lockwasher-din-5406-type-mb-7-inner-diameter-35mm-stainless-steel-1-4301-aisi-304-sku-65399553/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 6 inner diameter 30mm stainless steel 1.4301 (AISI 304) SKU: 65399548](https://maedler.in/product/lockwasher-din-5406-type-mb-6-inner-diameter-30mm-stainless-steel-1-4301-aisi-304-sku-65399548/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 5 inner diameter 25mm stainless steel 1.4301 (AISI 304) SKU: 65399544](https://maedler.in/product/lockwasher-din-5406-type-mb-5-inner-diameter-25mm-stainless-steel-1-4301-aisi-304-sku-65399544/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 4 inner diameter 20mm stainless steel 1.4301 (AISI 304) SKU: 65399540](https://maedler.in/product/lockwasher-din-5406-type-mb-4-inner-diameter-20mm-stainless-steel-1-4301-aisi-304-sku-65399540/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 3 inner diameter 17mm stainless steel 1.4301 (AISI 304) SKU: 65399537](https://maedler.in/product/lockwasher-din-5406-type-mb-3-inner-diameter-17mm-stainless-steel-1-4301-aisi-304-sku-65399537/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 2 inner diameter 15mm stainless steel 1.4301 (AISI 304) SKU: 65399534](https://maedler.in/product/lockwasher-din-5406-type-mb-2-inner-diameter-15mm-stainless-steel-1-4301-aisi-304-sku-65399534/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 1 inner diameter 12mm stainless steel 1.4301 (AISI 304) SKU: 65399532](https://maedler.in/product/lockwasher-din-5406-type-mb-1-inner-diameter-12mm-stainless-steel-1-4301-aisi-304-sku-65399532/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Lockwasher DIN 5406 Type MB 0 inner diameter 10mm stainless steel 1.4301 (AISI 304) SKU: 65399530](https://maedler.in/product/lockwasher-din-5406-type-mb-0-inner-diameter-10mm-stainless-steel-1-4301-aisi-304-sku-65399530/): Material: Stainless steel 1.4301 (AISI 304).Safety plates for locknuts DIN 981. A keyway is required on the shaft thread. - [Locknut DIN 70852 M95x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399529](https://maedler.in/product/locknut-din-70852-m95x15-stainless-steel-1-4301-aisi-304-sku-65399529/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M90x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399528](https://maedler.in/product/locknut-din-70852-m90x15-stainless-steel-1-4301-aisi-304-sku-65399528/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M85x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399527](https://maedler.in/product/locknut-din-70852-m85x15-stainless-steel-1-4301-aisi-304-sku-65399527/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M80x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399526](https://maedler.in/product/locknut-din-70852-m80x15-stainless-steel-1-4301-aisi-304-sku-65399526/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M75x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399525](https://maedler.in/product/locknut-din-70852-m75x15-stainless-steel-1-4301-aisi-304-sku-65399525/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M70x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399524](https://maedler.in/product/locknut-din-70852-m70x15-stainless-steel-1-4301-aisi-304-sku-65399524/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M65x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399523](https://maedler.in/product/locknut-din-70852-m65x15-stainless-steel-1-4301-aisi-304-sku-65399523/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M60x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399522](https://maedler.in/product/locknut-din-70852-m60x15-stainless-steel-1-4301-aisi-304-sku-65399522/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M55x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399521](https://maedler.in/product/locknut-din-70852-m55x15-stainless-steel-1-4301-aisi-304-sku-65399521/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M52x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399520](https://maedler.in/product/locknut-din-70852-m52x15-stainless-steel-1-4301-aisi-304-sku-65399520/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M50x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399519](https://maedler.in/product/locknut-din-70852-m50x15-stainless-steel-1-4301-aisi-304-sku-65399519/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M48x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399518](https://maedler.in/product/locknut-din-70852-m48x15-stainless-steel-1-4301-aisi-304-sku-65399518/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M45x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399517](https://maedler.in/product/locknut-din-70852-m45x15-stainless-steel-1-4301-aisi-304-sku-65399517/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M42x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399516](https://maedler.in/product/locknut-din-70852-m42x15-stainless-steel-1-4301-aisi-304-sku-65399516/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M40x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399515](https://maedler.in/product/locknut-din-70852-m40x15-stainless-steel-1-4301-aisi-304-sku-65399515/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M38x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399514](https://maedler.in/product/locknut-din-70852-m38x15-stainless-steel-1-4301-aisi-304-sku-65399514/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M35x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399513](https://maedler.in/product/locknut-din-70852-m35x15-stainless-steel-1-4301-aisi-304-sku-65399513/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M32x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399512](https://maedler.in/product/locknut-din-70852-m32x15-stainless-steel-1-4301-aisi-304-sku-65399512/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M30x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399511](https://maedler.in/product/locknut-din-70852-m30x15-stainless-steel-1-4301-aisi-304-sku-65399511/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M28x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399510](https://maedler.in/product/locknut-din-70852-m28x15-stainless-steel-1-4301-aisi-304-sku-65399510/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M26x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399509](https://maedler.in/product/locknut-din-70852-m26x15-stainless-steel-1-4301-aisi-304-sku-65399509/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M24x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399508](https://maedler.in/product/locknut-din-70852-m24x15-stainless-steel-1-4301-aisi-304-sku-65399508/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M22x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399507](https://maedler.in/product/locknut-din-70852-m22x15-stainless-steel-1-4301-aisi-304-sku-65399507/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M20x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399506](https://maedler.in/product/locknut-din-70852-m20x15-stainless-steel-1-4301-aisi-304-sku-65399506/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M18x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399505](https://maedler.in/product/locknut-din-70852-m18x15-stainless-steel-1-4301-aisi-304-sku-65399505/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M16x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399504](https://maedler.in/product/locknut-din-70852-m16x15-stainless-steel-1-4301-aisi-304-sku-65399504/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M14x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399503](https://maedler.in/product/locknut-din-70852-m14x15-stainless-steel-1-4301-aisi-304-sku-65399503/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M12x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399502](https://maedler.in/product/locknut-din-70852-m12x15-stainless-steel-1-4301-aisi-304-sku-65399502/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M10x1 stainless steel 1.4301 (AISI 304) SKU: 65399501](https://maedler.in/product/locknut-din-70852-m10x1-stainless-steel-1-4301-aisi-304-sku-65399501/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 70852 M100x1,5 stainless steel 1.4301 (AISI 304) SKU: 65399500](https://maedler.in/product/locknut-din-70852-m100x15-stainless-steel-1-4301-aisi-304-sku-65399500/): Material: Stainless steel 1.4301 (AISI 304). These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lock plate DIN 70952 (for these lockwashers, a keyway is required on the shaft thread). Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut UW with integral locking device M100x2 stainless steel 1.4301 SKU: 65399499](https://maedler.in/product/locknut-uw-with-integral-locking-device-m100x2-stainless-steel-1-4301-sku-65399499/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M95x2 stainless steel 1.4301 SKU: 65399495](https://maedler.in/product/locknut-uw-with-integral-locking-device-m95x2-stainless-steel-1-4301-sku-65399495/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M90x2 stainless steel 1.4301 SKU: 65399490](https://maedler.in/product/locknut-uw-with-integral-locking-device-m90x2-stainless-steel-1-4301-sku-65399490/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M85x2 stainless steel 1.4301 SKU: 65399485](https://maedler.in/product/locknut-uw-with-integral-locking-device-m85x2-stainless-steel-1-4301-sku-65399485/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M80x2 stainless steel 1.4301 SKU: 65399480](https://maedler.in/product/locknut-uw-with-integral-locking-device-m80x2-stainless-steel-1-4301-sku-65399480/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M75x2 stainless steel 1.4301 SKU: 65399475](https://maedler.in/product/locknut-uw-with-integral-locking-device-m75x2-stainless-steel-1-4301-sku-65399475/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M70x2 stainless steel 1.4301 SKU: 65399473](https://maedler.in/product/locknut-uw-with-integral-locking-device-m70x2-stainless-steel-1-4301-sku-65399473/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M65x2 stainless steel 1.4301 SKU: 65399472](https://maedler.in/product/locknut-uw-with-integral-locking-device-m65x2-stainless-steel-1-4301-sku-65399472/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M60x2 stainless steel 1.4301 SKU: 65399471](https://maedler.in/product/locknut-uw-with-integral-locking-device-m60x2-stainless-steel-1-4301-sku-65399471/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M55x2 stainless steel 1.4301 SKU: 65399468](https://maedler.in/product/locknut-uw-with-integral-locking-device-m55x2-stainless-steel-1-4301-sku-65399468/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M50x1.5 stainless steel 1.4301 SKU: 65399465](https://maedler.in/product/locknut-uw-with-integral-locking-device-m50x1-5-stainless-steel-1-4301-sku-65399465/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M45x1.5 stainless steel 1.4301 SKU: 65399462](https://maedler.in/product/locknut-uw-with-integral-locking-device-m45x1-5-stainless-steel-1-4301-sku-65399462/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M40x1.5 stainless steel 1.4301 SKU: 65399458](https://maedler.in/product/locknut-uw-with-integral-locking-device-m40x1-5-stainless-steel-1-4301-sku-65399458/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M35x1.5 stainless steel 1.4301 SKU: 65399453](https://maedler.in/product/locknut-uw-with-integral-locking-device-m35x1-5-stainless-steel-1-4301-sku-65399453/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M30x1.5 stainless steel 1.4301 SKU: 65399448](https://maedler.in/product/locknut-uw-with-integral-locking-device-m30x1-5-stainless-steel-1-4301-sku-65399448/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M25x1.5 stainless steel 1.4301 SKU: 65399444](https://maedler.in/product/locknut-uw-with-integral-locking-device-m25x1-5-stainless-steel-1-4301-sku-65399444/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M20x1 stainless steel 1.4301 SKU: 65399440](https://maedler.in/product/locknut-uw-with-integral-locking-device-m20x1-stainless-steel-1-4301-sku-65399440/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M17x1 stainless steel 1.4301 SKU: 65399437](https://maedler.in/product/locknut-uw-with-integral-locking-device-m17x1-stainless-steel-1-4301-sku-65399437/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M15x1 stainless steel 1.4301 SKU: 65399434](https://maedler.in/product/locknut-uw-with-integral-locking-device-m15x1-stainless-steel-1-4301-sku-65399434/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M12x1 stainless steel 1.4301 SKU: 65399432](https://maedler.in/product/locknut-uw-with-integral-locking-device-m12x1-stainless-steel-1-4301-sku-65399432/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut UW with integral locking device M10x0.75 stainless steel 1.4301 SKU: 65399430](https://maedler.in/product/locknut-uw-with-integral-locking-device-m10x0-75-stainless-steel-1-4301-sku-65399430/): Material: Body of the nut: Stainless steel 1.4301 (AISI 304). Locking insert: Stainless Steel. With these slot nuts no additional lock washers or keyways are required. No keyway or washer required for roller bearing. Designed for easy assembly. Maintenance-free construction. The bolt thread has to meet the medium quality of ISO 965. Please note: Ensure that there are at least two or three full threads behind the locking insert. This slot nut must not be used on shafts with keyway. Lubricate the nut when screwing it onto the shaft. Larger thread diameters can be supplied on request. Function: This system consists of a shaft nut and a special spring, acting as friction ring. This special spring is integrated into the upper part of the nut. Due to the lead of the thread the special spring locks itself between shaft and nut. The system is locked in any position! - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 12 M60x2 SKU: 65398571](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-12-m60x2-sku-65398571/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 11 M55x2 SKU: 65398568](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-11-m55x2-sku-65398568/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 10 M50x1,5 SKU: 65398565](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-10-m50x15-sku-65398565/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 9 M45x1,5 SKU: 65398562](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-9-m45x15-sku-65398562/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 8 M40x1,5 SKU: 65398558](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-8-m40x15-sku-65398558/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 7 M35x1,5 SKU: 65398553](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-7-m35x15-sku-65398553/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 6 M30x1,5 SKU: 65398548](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-6-m30x15-sku-65398548/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device size 5 M25x1,5 SKU: 65398544](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-size-5-m25x15-sku-65398544/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Locknut KMK-R material 1.4301 (AISI304) with integral locking device Größe 4 M20x1 SKU: 65398540](https://maedler.in/product/locknut-kmk-r-material-1-4301-aisi304-with-integral-locking-device-grose-4-m20x1-sku-65398540/): Material: Body of the nut from stainless steel 1.4301 (AISI 304). Reusable shaft nut with integrated locking device. Special feature of the shaft nut is the locking insert, integrated into the nut. This insert is threaded and thus does not cause any damage. The locking insert is pressed against the shaft thread with a locking screw and thus prevents the nut from turning. - [Rod end GEW DIN 12240-4 series E internal thread M24x2 left maintenance-free SKU: 63432500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m24x2-left-maintenance-free-sku-63432500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M20x1.5 left maintenance-free SKU: 63432000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m20x1-5-left-maintenance-free-sku-63432000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M16 left maintenance-free SKU: 63431700](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m16-left-maintenance-free-sku-63431700/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M16 left maintenance-free SKU: 63431600](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m16-left-maintenance-free-sku-63431600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M14 left maintenance-free SKU: 63431500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m14-left-maintenance-free-sku-63431500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M12 left maintenance-free SKU: 63431200](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m12-left-maintenance-free-sku-63431200/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M10 left maintenance-free SKU: 63431000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m10-left-maintenance-free-sku-63431000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M8 left maintenance-free SKU: 63430800](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m8-left-maintenance-free-sku-63430800/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M6 left maintenance-free SKU: 63430600](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m6-left-maintenance-free-sku-63430600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M64x4 right maintenance-free SKU: 63418000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m64x4-right-maintenance-free-sku-63418000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M56x4 right maintenance-free SKU: 63417000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m56x4-right-maintenance-free-sku-63417000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M52x3 right maintenance-free SKU: 63416000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m52x3-right-maintenance-free-sku-63416000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M45x3 right maintenance-free SKU: 63415000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m45x3-right-maintenance-free-sku-63415000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M42x3 right maintenance-free SKU: 63414500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m42x3-right-maintenance-free-sku-63414500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M39x3 right maintenance-free SKU: 63414000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m39x3-right-maintenance-free-sku-63414000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M36x3 right maintenance-free SKU: 63413500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m36x3-right-maintenance-free-sku-63413500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M30x2 right maintenance-free SKU: 63413000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m30x2-right-maintenance-free-sku-63413000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M24x2 right maintenance-free SKU: 63412500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m24x2-right-maintenance-free-sku-63412500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M20x1.5 right maintenance-free SKU: 63412000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m20x1-5-right-maintenance-free-sku-63412000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M16 right maintenance-free SKU: 63411700](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m16-right-maintenance-free-sku-63411700/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M16 right maintenance-free SKU: 63411600](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m16-right-maintenance-free-sku-63411600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M14 right maintenance-free SKU: 63411500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m14-right-maintenance-free-sku-63411500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M12 right maintenance-free SKU: 63411200](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m12-right-maintenance-free-sku-63411200/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M10 right maintenance-free SKU: 63411000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m10-right-maintenance-free-sku-63411000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M8 right maintenance-free SKU: 63410800](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m8-right-maintenance-free-sku-63410800/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M6 right maintenance-free SKU: 63410600](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m6-right-maintenance-free-sku-63410600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GT-R DIN ISO 12240-4 series K external thread M42x2 left maintenance-free stainless steel SKU: 63299940](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m42x2-left-maintenance-free-stainless-steel-sku-63299940/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M36x2 left maintenance-free stainless steel SKU: 63299935](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m36x2-left-maintenance-free-stainless-steel-sku-63299935/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M30x2 left maintenance-free stainless steel SKU: 63299930](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m30x2-left-maintenance-free-stainless-steel-sku-63299930/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M24x2 left maintenance-free stainless steel SKU: 63299925](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m24x2-left-maintenance-free-stainless-steel-sku-63299925/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M22x1.5 left maintenance-free stainless steel SKU: 63299922](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m22x1-5-left-maintenance-free-stainless-steel-sku-63299922/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M20x1.5 left maintenance-free stainless steel SKU: 63299920](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m20x1-5-left-maintenance-free-stainless-steel-sku-63299920/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M18x1,5 left maintenance-free stainless steel SKU: 63299918](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m18x15-left-maintenance-free-stainless-steel-sku-63299918/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M16 left maintenance-free stainless steel SKU: 63299916](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m16-left-maintenance-free-stainless-steel-sku-63299916/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M14 left maintenance-free stainless steel SKU: 63299914](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m14-left-maintenance-free-stainless-steel-sku-63299914/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M12 left maintenance-free stainless steel SKU: 63299912](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m12-left-maintenance-free-stainless-steel-sku-63299912/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M10 left maintenance-free stainless steel SKU: 63299910](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m10-left-maintenance-free-stainless-steel-sku-63299910/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M8 left maintenance-free stainless steel SKU: 63299908](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m8-left-maintenance-free-stainless-steel-sku-63299908/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M6 left maintenance-free stainless steel SKU: 63299906](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m6-left-maintenance-free-stainless-steel-sku-63299906/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M5 left maintenance-free stainless steel SKU: 63299905](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m5-left-maintenance-free-stainless-steel-sku-63299905/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M42x2 right maintenance-free stainless steel SKU: 63299840](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m42x2-right-maintenance-free-stainless-steel-sku-63299840/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M36x2 right maintenance-free stainless steel SKU: 63299835](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m36x2-right-maintenance-free-stainless-steel-sku-63299835/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M30x2 right maintenance-free stainless steel SKU: 63299830](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m30x2-right-maintenance-free-stainless-steel-sku-63299830/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M24x2 right maintenance-free stainless steel SKU: 63299825](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m24x2-right-maintenance-free-stainless-steel-sku-63299825/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M22x1,5 right maintenance-free stainless steel SKU: 63299822](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m22x15-right-maintenance-free-stainless-steel-sku-63299822/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M20x1.5 right maintenance-free stainless steel SKU: 63299820](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m20x1-5-right-maintenance-free-stainless-steel-sku-63299820/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M18x1,5 right maintenance-free stainless steel SKU: 63299818](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m18x15-right-maintenance-free-stainless-steel-sku-63299818/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M16 right maintenance-free stainless steel SKU: 63299816](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m16-right-maintenance-free-stainless-steel-sku-63299816/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M14 right maintenance-free stainless steel SKU: 63299814](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m14-right-maintenance-free-stainless-steel-sku-63299814/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M12 right maintenance-free stainless steel SKU: 63299812](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m12-right-maintenance-free-stainless-steel-sku-63299812/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M10 right maintenance-free stainless steel SKU: 63299810](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m10-right-maintenance-free-stainless-steel-sku-63299810/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M8 right maintenance-free stainless steel SKU: 63299808](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m8-right-maintenance-free-stainless-steel-sku-63299808/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M6 right maintenance-free stainless steel SKU: 63299806](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m6-right-maintenance-free-stainless-steel-sku-63299806/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K external thread M5 right maintenance-free stainless steel SKU: 63299805](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-external-thread-m5-right-maintenance-free-stainless-steel-sku-63299805/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M42x2 left maintenance-free stainless steel SKU: 63299740](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m42x2-left-maintenance-free-stainless-steel-sku-63299740/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M36x2 left maintenance-free stainless steel SKU: 63299735](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m36x2-left-maintenance-free-stainless-steel-sku-63299735/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M30x2 left maintenance-free stainless steel SKU: 63299730](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m30x2-left-maintenance-free-stainless-steel-sku-63299730/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free stainless steel SKU: 63299725](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m24x2-left-maintenance-free-stainless-steel-sku-63299725/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M22x1,5 left maintenance-free stainless steel SKU: 63299722](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m22x15-left-maintenance-free-stainless-steel-sku-63299722/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M20x1.5 left maintenance-free stainless steel SKU: 63299720](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m20x1-5-left-maintenance-free-stainless-steel-sku-63299720/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M18x1,5 left maintenance-free stainless steel SKU: 63299718](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m18x15-left-maintenance-free-stainless-steel-sku-63299718/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M16 left maintenance-free stainless steel SKU: 63299716](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m16-left-maintenance-free-stainless-steel-sku-63299716/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M14 left maintenance-free stainless steel SKU: 63299714](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m14-left-maintenance-free-stainless-steel-sku-63299714/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M12 left maintenance-free stainless steel SKU: 63299712](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m12-left-maintenance-free-stainless-steel-sku-63299712/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M10 left maintenance-free stainless steel SKU: 63299710](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m10-left-maintenance-free-stainless-steel-sku-63299710/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M8 left maintenance-free stainless steel SKU: 63299708](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m8-left-maintenance-free-stainless-steel-sku-63299708/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M6 left maintenance-free stainless steel SKU: 63299706](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m6-left-maintenance-free-stainless-steel-sku-63299706/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M5 left maintenance-free stainless steel SKU: 63299705](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m5-left-maintenance-free-stainless-steel-sku-63299705/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M42x2 right maintenance-free stainless steel SKU: 63299640](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m42x2-right-maintenance-free-stainless-steel-sku-63299640/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M36x2 right maintenance-free stainless steel SKU: 63299635](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m36x2-right-maintenance-free-stainless-steel-sku-63299635/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M30x2 right maintenance-free stainless steel SKU: 63299630](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m30x2-right-maintenance-free-stainless-steel-sku-63299630/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free stainless steel SKU: 63299625](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m24x2-right-maintenance-free-stainless-steel-sku-63299625/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M22x1,5 right maintenance-free stainless steel SKU: 63299622](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m22x15-right-maintenance-free-stainless-steel-sku-63299622/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M20x1.5 right maintenance-free stainless steel SKU: 63299620](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m20x1-5-right-maintenance-free-stainless-steel-sku-63299620/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M18x1,5 right maintenance-free stainless steel SKU: 63299618](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m18x15-right-maintenance-free-stainless-steel-sku-63299618/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M16 right maintenance-free stainless steel SKU: 63299616](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m16-right-maintenance-free-stainless-steel-sku-63299616/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M14 right maintenance-free stainless steel SKU: 63299614](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m14-right-maintenance-free-stainless-steel-sku-63299614/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M12 right maintenance-free stainless steel SKU: 63299612](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m12-right-maintenance-free-stainless-steel-sku-63299612/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M10 right maintenance-free stainless steel SKU: 63299610](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m10-right-maintenance-free-stainless-steel-sku-63299610/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M8 right maintenance-free stainless steel SKU: 63299608](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m8-right-maintenance-free-stainless-steel-sku-63299608/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M6 right maintenance-free stainless steel SKU: 63299606](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m6-right-maintenance-free-stainless-steel-sku-63299606/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end GT-R DIN ISO 12240-4 series K internal thread M5 right maintenance-free stainless steel SKU: 63299605](https://maedler.in/product/rod-end-gt-r-din-iso-12240-4-series-k-internal-thread-m5-right-maintenance-free-stainless-steel-sku-63299605/): Material: Outer part: Stainless steel 1.4057 (AISI 431), forged. Inner ring: Stainless steel 1.4034 (AISI 440 C), hardened, ground and polished. Bearing race: Stainless steel 1.4571 (AISI 316 Ti) with PTFE-Lining. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends for high radial loads in corrosive areas. Stainless steel on PTFE-lining. Maintenance-free. - [Rod end BR-R DIN 12240-4 series K external tread M20 left with spherical ball bearing stainless SKU: 63299570](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m20-left-with-spherical-ball-bearing-stainless-sku-63299570/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M16 left with spherical ball bearing stainless SKU: 63299566](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m16-left-with-spherical-ball-bearing-stainless-sku-63299566/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M12 left with spherical ball bearing stainless SKU: 63299562](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m12-left-with-spherical-ball-bearing-stainless-sku-63299562/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M10 left with spherical ball bearing stainless SKU: 63299560](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m10-left-with-spherical-ball-bearing-stainless-sku-63299560/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M8 left with spherical ball bearing stainless SKU: 63299558](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m8-left-with-spherical-ball-bearing-stainless-sku-63299558/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M20 right with spherical ball bearing stainless SKU: 63299520](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m20-right-with-spherical-ball-bearing-stainless-sku-63299520/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M16 right with spherical ball bearing stainless SKU: 63299516](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m16-right-with-spherical-ball-bearing-stainless-sku-63299516/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M12 right with spherical ball bearing stainless SKU: 63299512](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m12-right-with-spherical-ball-bearing-stainless-sku-63299512/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M10 right with spherical ball bearing stainless SKU: 63299510](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m10-right-with-spherical-ball-bearing-stainless-sku-63299510/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K external tread M8 right with spherical ball bearing stainless SKU: 63299508](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-external-tread-m8-right-with-spherical-ball-bearing-stainless-sku-63299508/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material:Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Thread rolled.Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC. If required special lubricants.Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed.Heavy-duty rod ends with roller bearing.very light running (basically without friction).Long-term lubricated and sealed with cover plates.For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M20 left with spherical ball bearing stainless SKU: 63299470](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m20-left-with-spherical-ball-bearing-stainless-sku-63299470/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M16 left with spherical ball bearing stainless SKU: 63299466](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m16-left-with-spherical-ball-bearing-stainless-sku-63299466/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M12 left with spherical ball bearing stainless SKU: 63299462](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m12-left-with-spherical-ball-bearing-stainless-sku-63299462/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M10 left with spherical ball bearing stainless SKU: 63299460](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m10-left-with-spherical-ball-bearing-stainless-sku-63299460/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M8 left with spherical ball bearing stainless SKU: 63299458](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m8-left-with-spherical-ball-bearing-stainless-sku-63299458/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M6 left with spherical ball bearing stainless SKU: 63299456](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m6-left-with-spherical-ball-bearing-stainless-sku-63299456/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M20 right with spherical ball bearing stainless SKU: 63299420](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m20-right-with-spherical-ball-bearing-stainless-sku-63299420/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Rod end BR-R DIN 12240-4 series K internal tread M16 right with spherical ball bearing stainless SKU: 63299416](https://maedler.in/product/rod-end-br-r-din-12240-4-series-k-internal-tread-m16-right-with-spherical-ball-bearing-stainless-sku-63299416/): Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished.Lubrication:Aluminium-complex-soap-grease,approval according to USDA H1, -45ºC to +120ºC.If required special lubricants.Wide version. Dimensions according to DIN 648 / 12240 series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. Material: Outer part: Stainless steel, forged, hardened. Bearing race superfinished.Inner ring and rollers: Stainless steel, hardened, superfinished. Lubrication: Aluminium-complex-soap-grease,approval according to NSF H1, -45ºC to +120ºC.If required special lubricants. Wide version. Dimensions according to DIN ISO 12240-4 (DIN 648) series K. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates. For high loads. - [Flat knurled thumb screw DIN 653 M10 x 40mm long stainless steel 1.4305 SKU: 65423438](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m10-x-40mm-long-stainless-steel-1-4305-sku-65423438/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M10 x 30mm long stainless steel 1.4305 SKU: 65423436](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m10-x-30mm-long-stainless-steel-1-4305-sku-65423436/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M10 x 25mm long stainless steel 1.4305 SKU: 65423435](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m10-x-25mm-long-stainless-steel-1-4305-sku-65423435/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M10 x 20mm long stainless steel 1.4305 SKU: 65423434](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m10-x-20mm-long-stainless-steel-1-4305-sku-65423434/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M8 x 30mm long stainless steel 1.4305 SKU: 65423431](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m8-x-30mm-long-stainless-steel-1-4305-sku-65423431/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M8 x 25mm long stainless steel 1.4305 SKU: 65423430](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m8-x-25mm-long-stainless-steel-1-4305-sku-65423430/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M8 x 20mm long stainless steel 1.4305 SKU: 65423429](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m8-x-20mm-long-stainless-steel-1-4305-sku-65423429/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M8 x 16mm long stainless steel 1.4305 SKU: 65423428](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m8-x-16mm-long-stainless-steel-1-4305-sku-65423428/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M6 x 25mm long stainless steel 1.4305 SKU: 65423425](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m6-x-25mm-long-stainless-steel-1-4305-sku-65423425/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M6 x 20mm long stainless steel 1.4305 SKU: 65423424](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m6-x-20mm-long-stainless-steel-1-4305-sku-65423424/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M6 x 16mm long stainless steel 1.4305 SKU: 65423423](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m6-x-16mm-long-stainless-steel-1-4305-sku-65423423/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M6 x 12mm long stainless steel 1.4305 SKU: 65423422](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m6-x-12mm-long-stainless-steel-1-4305-sku-65423422/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M5 x 20mm long stainless steel 1.4305 SKU: 65423419](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m5-x-20mm-long-stainless-steel-1-4305-sku-65423419/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M5 x 16mm long stainless steel 1.4305 SKU: 65423418](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m5-x-16mm-long-stainless-steel-1-4305-sku-65423418/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M5 x 12mm long stainless steel 1.4305 SKU: 65423417](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m5-x-12mm-long-stainless-steel-1-4305-sku-65423417/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M5 x 10mm long stainless steel 1.4305 SKU: 65423416](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m5-x-10mm-long-stainless-steel-1-4305-sku-65423416/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M4 x 16mm long stainless steel 1.4305 SKU: 65423413](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m4-x-16mm-long-stainless-steel-1-4305-sku-65423413/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M4 x 12mm long stainless steel 1.4305 SKU: 65423412](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m4-x-12mm-long-stainless-steel-1-4305-sku-65423412/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M4 x 10mm long stainless steel 1.4305 SKU: 65423411](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m4-x-10mm-long-stainless-steel-1-4305-sku-65423411/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M4 x 8mm long stainless steel 1.4305 SKU: 65423410](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m4-x-8mm-long-stainless-steel-1-4305-sku-65423410/): Material: Stainless steel 1.4305 (AISI 303).Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M10 x 40mm long steel strength 5.8 black oxide finished SKU: 65423338](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m10-x-40mm-long-steel-strength-5-8-black-oxide-finished-sku-65423338/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M10 x 30mm long steel strength 5.8 black oxide finished SKU: 65423336](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m10-x-30mm-long-steel-strength-5-8-black-oxide-finished-sku-65423336/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M10 x 25mm long steel strength 5.8 black oxide finished SKU: 65423335](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m10-x-25mm-long-steel-strength-5-8-black-oxide-finished-sku-65423335/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M10 x 20mm long steel strength 5.8 black oxide finished SKU: 65423334](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m10-x-20mm-long-steel-strength-5-8-black-oxide-finished-sku-65423334/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M8 x 40mm long steel strength 5.8 black oxide finished SKU: 65423333](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m8-x-40mm-long-steel-strength-5-8-black-oxide-finished-sku-65423333/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M8 x 30mm long steel strength 5.8 black oxide finished SKU: 65423331](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m8-x-30mm-long-steel-strength-5-8-black-oxide-finished-sku-65423331/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M8 x 25mm long steel strength 5.8 black oxide finished SKU: 65423330](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m8-x-25mm-long-steel-strength-5-8-black-oxide-finished-sku-65423330/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M8 x 20mm long steel strength 5.8 black oxide finished SKU: 65423329](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m8-x-20mm-long-steel-strength-5-8-black-oxide-finished-sku-65423329/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M8 x 16mm long steel strength 5.8 black oxide finished SKU: 65423328](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m8-x-16mm-long-steel-strength-5-8-black-oxide-finished-sku-65423328/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M6 x 30mm long steel strength 5.8 black oxide finished SKU: 65423326](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m6-x-30mm-long-steel-strength-5-8-black-oxide-finished-sku-65423326/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M6 x 25mm long steel strength 5.8 black oxide finished SKU: 65423325](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m6-x-25mm-long-steel-strength-5-8-black-oxide-finished-sku-65423325/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M6 x 20mm long steel strength 5.8 black oxide finished SKU: 65423324](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m6-x-20mm-long-steel-strength-5-8-black-oxide-finished-sku-65423324/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M6 x 16mm long steel strength 5.8 black oxide finished SKU: 65423323](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m6-x-16mm-long-steel-strength-5-8-black-oxide-finished-sku-65423323/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M6 x 12mm long steel strength 5.8 black oxide finished SKU: 65423322](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m6-x-12mm-long-steel-strength-5-8-black-oxide-finished-sku-65423322/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M5 x 25mm long steel strength 5.8 black oxide finished SKU: 65423320](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m5-x-25mm-long-steel-strength-5-8-black-oxide-finished-sku-65423320/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M5 x 20mm long steel strength 5.8 black oxide finished SKU: 65423319](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m5-x-20mm-long-steel-strength-5-8-black-oxide-finished-sku-65423319/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M5 x 16mm long steel strength 5.8 black oxide finished SKU: 65423318](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m5-x-16mm-long-steel-strength-5-8-black-oxide-finished-sku-65423318/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M5 x 12mm long steel strength 5.8 black oxide finished SKU: 65423317](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m5-x-12mm-long-steel-strength-5-8-black-oxide-finished-sku-65423317/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M5 x 10mm long steel strength 5.8 black oxide finished SKU: 65423316](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m5-x-10mm-long-steel-strength-5-8-black-oxide-finished-sku-65423316/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M4 x 20mm long steel strength 5.8 black oxide finished SKU: 65423314](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m4-x-20mm-long-steel-strength-5-8-black-oxide-finished-sku-65423314/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M4 x 16mm long steel strength 5.8 black oxide finished SKU: 65423313](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m4-x-16mm-long-steel-strength-5-8-black-oxide-finished-sku-65423313/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M4 x 12mm long steel strength 5.8 black oxide finished SKU: 65423312](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m4-x-12mm-long-steel-strength-5-8-black-oxide-finished-sku-65423312/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M4 x 10mm long steel strength 5.8 black oxide finished SKU: 65423311](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m4-x-10mm-long-steel-strength-5-8-black-oxide-finished-sku-65423311/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M4 x 8mm long steel strength 5.8 black oxide finished SKU: 65423310](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m4-x-8mm-long-steel-strength-5-8-black-oxide-finished-sku-65423310/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M3 x 16mm long steel strength 5.8 black oxide finished SKU: 65423308](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m3-x-16mm-long-steel-strength-5-8-black-oxide-finished-sku-65423308/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M3 x 10mm long steel strength 5.8 black oxide finished SKU: 65423307](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m3-x-10mm-long-steel-strength-5-8-black-oxide-finished-sku-65423307/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M3 x 8mm long steel strength 5.8 black oxide finished SKU: 65423306](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m3-x-8mm-long-steel-strength-5-8-black-oxide-finished-sku-65423306/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Flat knurled thumb screw DIN 653 M3 x 6mm long steel strength 5.8 black oxide finished SKU: 65423305](https://maedler.in/product/flat-knurled-thumb-screw-din-653-m3-x-6mm-long-steel-strength-5-8-black-oxide-finished-sku-65423305/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. Produced from one piece and threaded over their full length (DIN designation A). - [Knurled thumb screw DIN 464 M10 x 40mm long steel strength 5.8 black oxide finished SKU: 65423200](https://maedler.in/product/knurled-thumb-screw-din-464-m10-x-40mm-long-steel-strength-5-8-black-oxide-finished-sku-65423200/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M10 x 30mm long steel strength 5.8 black oxide finished SKU: 65423100](https://maedler.in/product/knurled-thumb-screw-din-464-m10-x-30mm-long-steel-strength-5-8-black-oxide-finished-sku-65423100/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M10 x 20mm long steel strength 5.8 black oxide finished SKU: 65422900](https://maedler.in/product/knurled-thumb-screw-din-464-m10-x-20mm-long-steel-strength-5-8-black-oxide-finished-sku-65422900/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M8 x 30mm long steel strength 5.8 black oxide finished SKU: 65422700](https://maedler.in/product/knurled-thumb-screw-din-464-m8-x-30mm-long-steel-strength-5-8-black-oxide-finished-sku-65422700/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M8 x 20mm long steel strength 5.8 black oxide finished SKU: 65422500](https://maedler.in/product/knurled-thumb-screw-din-464-m8-x-20mm-long-steel-strength-5-8-black-oxide-finished-sku-65422500/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M8 x 16mm long steel strength 5.8 black oxide finished SKU: 65422400](https://maedler.in/product/knurled-thumb-screw-din-464-m8-x-16mm-long-steel-strength-5-8-black-oxide-finished-sku-65422400/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M6 x 25mm long steel strength 5.8 black oxide finished SKU: 65422200](https://maedler.in/product/knurled-thumb-screw-din-464-m6-x-25mm-long-steel-strength-5-8-black-oxide-finished-sku-65422200/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M6 x 20mm long steel strength 5.8 black oxide finished SKU: 65422100](https://maedler.in/product/knurled-thumb-screw-din-464-m6-x-20mm-long-steel-strength-5-8-black-oxide-finished-sku-65422100/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M6 x 16mm long steel strength 5.8 black oxide finished SKU: 65422000](https://maedler.in/product/knurled-thumb-screw-din-464-m6-x-16mm-long-steel-strength-5-8-black-oxide-finished-sku-65422000/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M6 x 10mm long steel strength 5.8 black oxide finished SKU: 65421800](https://maedler.in/product/knurled-thumb-screw-din-464-m6-x-10mm-long-steel-strength-5-8-black-oxide-finished-sku-65421800/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M5 x 20mm long steel strength 5.8 black oxide finished SKU: 65421600](https://maedler.in/product/knurled-thumb-screw-din-464-m5-x-20mm-long-steel-strength-5-8-black-oxide-finished-sku-65421600/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M5 x 16mm long steel strength 5.8 black oxide finished SKU: 65421400](https://maedler.in/product/knurled-thumb-screw-din-464-m5-x-16mm-long-steel-strength-5-8-black-oxide-finished-sku-65421400/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M5 x 10mm long steel strength 5.8 black oxide finished SKU: 65421200](https://maedler.in/product/knurled-thumb-screw-din-464-m5-x-10mm-long-steel-strength-5-8-black-oxide-finished-sku-65421200/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M4 x 16mm long steel strength 5.8 black oxide finished SKU: 65420800](https://maedler.in/product/knurled-thumb-screw-din-464-m4-x-16mm-long-steel-strength-5-8-black-oxide-finished-sku-65420800/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M4 x 12mm long steel strength 5.8 black oxide finished SKU: 65420700](https://maedler.in/product/knurled-thumb-screw-din-464-m4-x-12mm-long-steel-strength-5-8-black-oxide-finished-sku-65420700/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M4 x 10mm long steel strength 5.8 black oxide finished SKU: 65420600](https://maedler.in/product/knurled-thumb-screw-din-464-m4-x-10mm-long-steel-strength-5-8-black-oxide-finished-sku-65420600/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M4 x 8mm long steel strength 5.8 black oxide finished SKU: 65420500](https://maedler.in/product/knurled-thumb-screw-din-464-m4-x-8mm-long-steel-strength-5-8-black-oxide-finished-sku-65420500/): Material: Steel, black oxide finish, tensile strength 5.8. Visible face precision turned. All knurled thumb screws DIN 464 are produced from one piece and threaded over their full length. - [Knurled thumb screw 421 M10 x 55mm with bolt from stainless steel SKU: 65399799](https://maedler.in/product/knurled-thumb-screw-421-m10-x-55mm-with-bolt-from-stainless-steel-sku-65399799/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M10 x 30mm with bolt from stainless steel SKU: 65399796](https://maedler.in/product/knurled-thumb-screw-421-m10-x-30mm-with-bolt-from-stainless-steel-sku-65399796/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M10 x 25mm with bolt from stainless steel SKU: 65399795](https://maedler.in/product/knurled-thumb-screw-421-m10-x-25mm-with-bolt-from-stainless-steel-sku-65399795/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M10 x 20mm with bolt from stainless steel SKU: 65399794](https://maedler.in/product/knurled-thumb-screw-421-m10-x-20mm-with-bolt-from-stainless-steel-sku-65399794/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M8 x 40mm with bolt from stainless steel SKU: 65399793](https://maedler.in/product/knurled-thumb-screw-421-m8-x-40mm-with-bolt-from-stainless-steel-sku-65399793/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M8 x 30mm with bolt from stainless steel SKU: 65399792](https://maedler.in/product/knurled-thumb-screw-421-m8-x-30mm-with-bolt-from-stainless-steel-sku-65399792/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M8 x 20mm with bolt from stainless steel SKU: 65399790](https://maedler.in/product/knurled-thumb-screw-421-m8-x-20mm-with-bolt-from-stainless-steel-sku-65399790/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M6 x 30mm with bolt from stainless steel SKU: 65399787](https://maedler.in/product/knurled-thumb-screw-421-m6-x-30mm-with-bolt-from-stainless-steel-sku-65399787/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M6 x 25mm with bolt from stainless steel SKU: 65399786](https://maedler.in/product/knurled-thumb-screw-421-m6-x-25mm-with-bolt-from-stainless-steel-sku-65399786/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M6 x 20mm with bolt from stainless steel SKU: 65399784](https://maedler.in/product/knurled-thumb-screw-421-m6-x-20mm-with-bolt-from-stainless-steel-sku-65399784/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M6 x 16mm with bolt from stainless steel SKU: 65399782](https://maedler.in/product/knurled-thumb-screw-421-m6-x-16mm-with-bolt-from-stainless-steel-sku-65399782/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M5 x 25mm with bolt from stainless steel SKU: 65399781](https://maedler.in/product/knurled-thumb-screw-421-m5-x-25mm-with-bolt-from-stainless-steel-sku-65399781/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M5 x 20mm with bolt from stainless steel SKU: 65399780](https://maedler.in/product/knurled-thumb-screw-421-m5-x-20mm-with-bolt-from-stainless-steel-sku-65399780/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M5 x 15mm with bolt from stainless steel SKU: 65399778](https://maedler.in/product/knurled-thumb-screw-421-m5-x-15mm-with-bolt-from-stainless-steel-sku-65399778/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Knurled thumb screw 421 M5 x 10mm with bolt from stainless steel SKU: 65399776](https://maedler.in/product/knurled-thumb-screw-421-m5-x-10mm-with-bolt-from-stainless-steel-sku-65399776/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Threaded bolt: Stainless steel 1.4567. - [Hollow knurled nut 420 M8 bush stainless steel SKU: 65399758](https://maedler.in/product/hollow-knurled-nut-420-m8-bush-stainless-steel-sku-65399758/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Bush: Stainless steel 1.4305 (AISI 303). - [Hollow knurled nut 420 M6 bush stainless steel SKU: 65399756](https://maedler.in/product/hollow-knurled-nut-420-m6-bush-stainless-steel-sku-65399756/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Bush: Stainless steel 1.4305 (AISI 303). - [Hollow knurled nut 420 M5 bush stainless steel SKU: 65399755](https://maedler.in/product/hollow-knurled-nut-420-m5-bush-stainless-steel-sku-65399755/): Material: Head: Plastic thermoplast (polyamide) black, glossy finish Bush: Stainless steel 1.4305 (AISI 303). - [Flat knurled nut DIN 467 M10 stainless steel 1.4305 SKU: 65399750](https://maedler.in/product/flat-knurled-nut-din-467-m10-stainless-steel-1-4305-sku-65399750/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [Flat knurled nut DIN 467 M8 stainless steel 1.4305 SKU: 65399748](https://maedler.in/product/flat-knurled-nut-din-467-m8-stainless-steel-1-4305-sku-65399748/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [Flat knurled nut DIN 467 M6 stainless steel 1.4305 SKU: 65399746](https://maedler.in/product/flat-knurled-nut-din-467-m6-stainless-steel-1-4305-sku-65399746/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [Flat knurled nut DIN 467 M5 stainless steel 1.4305 SKU: 65399745](https://maedler.in/product/flat-knurled-nut-din-467-m5-stainless-steel-1-4305-sku-65399745/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [Flat knurled nut DIN 467 M4 stainless steel 1.4305 SKU: 65399744](https://maedler.in/product/flat-knurled-nut-din-467-m4-stainless-steel-1-4305-sku-65399744/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [High knurled nut DIN 466 M10 stainless steel 1.4305 SKU: 65399730](https://maedler.in/product/high-knurled-nut-din-466-m10-stainless-steel-1-4305-sku-65399730/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [High knurled nut DIN 466 M8 stainless steel 1.4305 SKU: 65399728](https://maedler.in/product/high-knurled-nut-din-466-m8-stainless-steel-1-4305-sku-65399728/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [High knurled nut DIN 466 M6 stainless steel 1.4305 SKU: 65399726](https://maedler.in/product/high-knurled-nut-din-466-m6-stainless-steel-1-4305-sku-65399726/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [High knurled nut DIN 466 M5 stainless steel 1.4305 SKU: 65399725](https://maedler.in/product/high-knurled-nut-din-466-m5-stainless-steel-1-4305-sku-65399725/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [High knurled nut DIN 466 M4 stainless steel 1.4305 SKU: 65399724](https://maedler.in/product/high-knurled-nut-din-466-m4-stainless-steel-1-4305-sku-65399724/): Material: Stainless steel 1.4305 (AISI 303), visible face precision turned, sand blasted matt. - [Knurled nut DIN 6303 thread M12 stainless steel 1.4305 SKU: 65399712](https://maedler.in/product/knurled-nut-din-6303-thread-m12-stainless-steel-1-4305-sku-65399712/): Material: Stainless steel 1.4305 (AISI 303). Without pin hole. - [Knurled nut DIN 6303 thread M10 stainless steel 1.4305 SKU: 65399710](https://maedler.in/product/knurled-nut-din-6303-thread-m10-stainless-steel-1-4305-sku-65399710/): Material: Stainless steel 1.4305 (AISI 303). Without pin hole. - [Knurled nut DIN 6303 thread M8 stainless steel 1.4305 SKU: 65399708](https://maedler.in/product/knurled-nut-din-6303-thread-m8-stainless-steel-1-4305-sku-65399708/): Material: Stainless steel 1.4305 (AISI 303). Without pin hole. - [Knurled nut DIN 6303 thread M6 stainless steel 1.4305 SKU: 65399706](https://maedler.in/product/knurled-nut-din-6303-thread-m6-stainless-steel-1-4305-sku-65399706/): Material: Stainless steel 1.4305 (AISI 303). Without pin hole. - [Knurled nut DIN 6303 thread M5 stainless steel 1.4305 SKU: 65399705](https://maedler.in/product/knurled-nut-din-6303-thread-m5-stainless-steel-1-4305-sku-65399705/): Material: Stainless steel 1.4305 (AISI 303). Without pin hole. - [Locknut DIN 981 KM 20 thread M100x2 stainless steel 1.4301 (AISI304) SKU: 65399690](https://maedler.in/product/locknut-din-981-km-20-thread-m100x2-stainless-steel-1-4301-aisi304-sku-65399690/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Locknut DIN 981 KM 19 thread M95x2 stainless steel 1.4301 (AISI304) SKU: 65399687](https://maedler.in/product/locknut-din-981-km-19-thread-m95x2-stainless-steel-1-4301-aisi304-sku-65399687/): Material: Stainless steel 1.4301 (AISI 304).These nuts are used for unsafed, quickly to loosen applications, or for a safe connection with an additional lockwasher DIN 5406 (for these lockwashers, a keyway is required on the shaft thread).Recommend tolerance for the shaft thread: 6g DIN ISO 965. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 3000mm long single-start right material C15 rolled SKU: 64031600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 3000mm long single-start right material C15 rolled SKU: 64031400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 3000mm long single-start right material C15 rolled SKU: 64031200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 3000mm long single-start right material C15 rolled SKU: 64031000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 2000mm long single-start right material C15 rolled SKU: 64027000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-2000mm-long-single-start-right-material-c15-rolled-sku-64027000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 2000mm long single-start right material C15 rolled SKU: 64026000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-2000mm-long-single-start-right-material-c15-rolled-sku-64026000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 2000mm long single-start right material C15 rolled SKU: 64025200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-2000mm-long-single-start-right-material-c15-rolled-sku-64025200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN103 Tr.50 x 8 x 2000mm long, single start right material C15, rolled SKU: 64025000](https://maedler.in/product/trapezoidal-threaded-spindle-din103-tr-50-x-8-x-2000mm-long-single-start-right-material-c15-rolled-sku-64025000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 2000mm long single-start right material C15 rolled SKU: 64024800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-2000mm-long-single-start-right-material-c15-rolled-sku-64024800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 2000mm long single-start right material C15 rolled SKU: 64024400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-2000mm-long-single-start-right-material-c15-rolled-sku-64024400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 2000mm long single-start right material C15 rolled SKU: 64024000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-2000mm-long-single-start-right-material-c15-rolled-sku-64024000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 2000mm long single-start right material C15 rolled SKU: 64023600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-2000mm-long-single-start-right-material-c15-rolled-sku-64023600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 2000mm long single-start right material C15 rolled SKU: 64023200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-2000mm-long-single-start-right-material-c15-rolled-sku-64023200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 2000mm long single-start right material C15 rolled SKU: 64023000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-2000mm-long-single-start-right-material-c15-rolled-sku-64023000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 2000mm long single-start right material C15 rolled SKU: 64022800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-2000mm-long-single-start-right-material-c15-rolled-sku-64022800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 2000mm long single-start right material C15 rolled SKU: 64022400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-2000mm-long-single-start-right-material-c15-rolled-sku-64022400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 2000mm long single-start right material C15 rolled SKU: 64022000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-2000mm-long-single-start-right-material-c15-rolled-sku-64022000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 2000mm long single-start right material C15 rolled SKU: 64021800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 2000mm long single-start right material C15 rolled SKU: 64021600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 2000mm long single-start right material C15 rolled SKU: 64021400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start right material C15 rolled SKU: 64021200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 2000mm long single-start right material C15 rolled SKU: 64021000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-2000mm-long-single-start-right-material-c15-rolled-sku-64021000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 1500mm long single-start right material C15 rolled SKU: 64017000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-1500mm-long-single-start-right-material-c15-rolled-sku-64017000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 1500mm long single-start right material C15 rolled SKU: 64016000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-1500mm-long-single-start-right-material-c15-rolled-sku-64016000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 1500mm long single-start right material C15 rolled SKU: 64015200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-1500mm-long-single-start-right-material-c15-rolled-sku-64015200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1500mm long single-start right material C15 rolled SKU: 64015000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1500mm-long-single-start-right-material-c15-rolled-sku-64015000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 1500mm long single-start right material C15 rolled SKU: 64014800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-1500mm-long-single-start-right-material-c15-rolled-sku-64014800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 1500mm long single-start right material C15 rolled SKU: 64014400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-1500mm-long-single-start-right-material-c15-rolled-sku-64014400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1500mm long single-start right material C15 rolled SKU: 64014000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1500mm-long-single-start-right-material-c15-rolled-sku-64014000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1500mm long single-start right material C15 rolled SKU: 64013600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1500mm-long-single-start-right-material-c15-rolled-sku-64013600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 1500mm long single-start right material C15 rolled SKU: 64013200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-1500mm-long-single-start-right-material-c15-rolled-sku-64013200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1500mm long single-start right material C15 rolled SKU: 64013000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1500mm-long-single-start-right-material-c15-rolled-sku-64013000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1500mm long single-start right material C15 rolled SKU: 64012800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1500mm-long-single-start-right-material-c15-rolled-sku-64012800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1500mm long single-start right material C15 rolled SKU: 64012400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1500mm-long-single-start-right-material-c15-rolled-sku-64012400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1500mm long single-start right material C15 rolled SKU: 64012000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1500mm-long-single-start-right-material-c15-rolled-sku-64012000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1500mm long single-start right material C15 rolled SKU: 64011800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1500mm long single-start right material C15 rolled SKU: 64011600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1500mm long single-start right material C15 rolled SKU: 64011400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1500mm long single-start right material C15 rolled SKU: 64011200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1500mm long single-start right material C15 rolled SKU: 64011000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1500mm-long-single-start-right-material-c15-rolled-sku-64011000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.70 x 10 x 1000mm long single-start right material C15 rolled SKU: 64007000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-1000mm-long-single-start-right-material-c15-rolled-sku-64007000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.60 x 9 x 1000mm long single-start right material C15 rolled SKU: 64006000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-1000mm-long-single-start-right-material-c15-rolled-sku-64006000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.52 x 8 x 1000mm long single-start right material C15 rolled SKU: 64005200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-1000mm-long-single-start-right-material-c15-rolled-sku-64005200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.50 x 8 x 1000mm long single-start right material C15 rolled SKU: 64005000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1000mm-long-single-start-right-material-c15-rolled-sku-64005000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.48 x 8 x 1000mm long single-start right material C15 rolled SKU: 64004800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-1000mm-long-single-start-right-material-c15-rolled-sku-64004800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.44 x 7 x 1000mm long single-start right material C15 rolled SKU: 64004400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-1000mm-long-single-start-right-material-c15-rolled-sku-64004400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.40 x 7 x 1000mm long single-start right material C15 rolled SKU: 64004000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1000mm-long-single-start-right-material-c15-rolled-sku-64004000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.36 x 6 x 1000mm long single-start right material C15 rolled SKU: 64003600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1000mm-long-single-start-right-material-c15-rolled-sku-64003600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.32 x 6 x 1000mm long single-start right material C15 rolled SKU: 64003200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-1000mm-long-single-start-right-material-c15-rolled-sku-64003200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.30 x 6 x 1000mm long single-start right material C15 rolled SKU: 64003000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1000mm-long-single-start-right-material-c15-rolled-sku-64003000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.28 x 5 x 1000mm long single-start right material C15 rolled SKU: 64002800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1000mm-long-single-start-right-material-c15-rolled-sku-64002800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.24 x 5 x 1000mm long single-start right material C15 rolled SKU: 64002400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1000mm-long-single-start-right-material-c15-rolled-sku-64002400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.20 x 4 x 1000 mm long single-start right material C15 rolled SKU: 64002000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1000-mm-long-single-start-right-material-c15-rolled-sku-64002000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.18 x 4 x1000 mm long single-start right material C15 rolled SKU: 64001800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x1000-mm-long-single-start-right-material-c15-rolled-sku-64001800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.16 x 4 x1000 mm long single-start right material C15 rolled SKU: 64001600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x1000-mm-long-single-start-right-material-c15-rolled-sku-64001600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.14 x 4 x 1000mm long single-start right material C15 rolled SKU: 64001400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1000mm-long-single-start-right-material-c15-rolled-sku-64001400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.12 x 3 x 1000mm long single-start right material C15 rolled SKU: 64001200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1000mm-long-single-start-right-material-c15-rolled-sku-64001200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal threaded spindle DIN 103 Tr.10 x 3 x 1000mm long single-start right material C15 rolled SKU: 64001000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1000mm-long-single-start-right-material-c15-rolled-sku-64001000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Rod end GAW DIN 12240-4 series E external thread M64x4 left maintenance-free SKU: 63488000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m64x4-left-maintenance-free-sku-63488000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M56x4 left maintenance-free SKU: 63487000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m56x4-left-maintenance-free-sku-63487000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M52x3 left maintenance-free SKU: 63486000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m52x3-left-maintenance-free-sku-63486000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M45x3 left maintenance-free SKU: 63485000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m45x3-left-maintenance-free-sku-63485000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M42x3 left maintenance-free SKU: 63484500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m42x3-left-maintenance-free-sku-63484500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M39x3 left maintenance-free SKU: 63484000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m39x3-left-maintenance-free-sku-63484000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M36x3 left maintenance-free SKU: 63483500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m36x3-left-maintenance-free-sku-63483500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M30x2 left maintenance-free SKU: 63483000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m30x2-left-maintenance-free-sku-63483000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M24x2 left maintenance-free SKU: 63482500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m24x2-left-maintenance-free-sku-63482500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M20x1.5 left maintenance-free SKU: 63482000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m20x1-5-left-maintenance-free-sku-63482000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M16 left maintenance-free SKU: 63481700](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m16-left-maintenance-free-sku-63481700/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M16 left maintenance-free SKU: 63481600](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m16-left-maintenance-free-sku-63481600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M14 left maintenance-free SKU: 63481500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m14-left-maintenance-free-sku-63481500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M12 left maintenance-free SKU: 63481200](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m12-left-maintenance-free-sku-63481200/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M10 left maintenance-free SKU: 63481000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m10-left-maintenance-free-sku-63481000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M8 left maintenance-free SKU: 63480800](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m8-left-maintenance-free-sku-63480800/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M6 left maintenance-free SKU: 63480600](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m6-left-maintenance-free-sku-63480600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M64x4 right maintenance-free SKU: 63468000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m64x4-right-maintenance-free-sku-63468000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M56x4 right maintenance-free SKU: 63467000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m56x4-right-maintenance-free-sku-63467000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M52x3 right maintenance-free SKU: 63466000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m52x3-right-maintenance-free-sku-63466000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M45x3 right maintenance-free SKU: 63465000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m45x3-right-maintenance-free-sku-63465000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M42x3 right maintenance-free SKU: 63464500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m42x3-right-maintenance-free-sku-63464500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M39x3 right maintenance-free SKU: 63464000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m39x3-right-maintenance-free-sku-63464000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M36x3 right maintenance-free SKU: 63463500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m36x3-right-maintenance-free-sku-63463500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M30x2 right maintenance-free SKU: 63463000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m30x2-right-maintenance-free-sku-63463000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M24x2 right maintenance-free SKU: 63462500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m24x2-right-maintenance-free-sku-63462500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M20x1.5 right maintenance-free SKU: 63462000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m20x1-5-right-maintenance-free-sku-63462000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M16 right maintenance-free SKU: 63461700](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m16-right-maintenance-free-sku-63461700/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M16 right maintenance-free SKU: 63461600](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m16-right-maintenance-free-sku-63461600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M14 right maintenance-free SKU: 63461500](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m14-right-maintenance-free-sku-63461500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M12 right maintenance-free SKU: 63461200](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m12-right-maintenance-free-sku-63461200/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M10 right maintenance-free SKU: 63461000](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m10-right-maintenance-free-sku-63461000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M8 right maintenance-free SKU: 63460800](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m8-right-maintenance-free-sku-63460800/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GAW DIN 12240-4 series E external thread M6 right maintenance-free SKU: 63460600](https://maedler.in/product/rod-end-gaw-din-12240-4-series-e-external-thread-m6-right-maintenance-free-sku-63460600/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for pivoting loads at small mounting width. Steel on PTFE-lining. Maintenance-free. Not for higher speeds. - [Rod end GEW DIN 12240-4 series E internal thread M64x4 left maintenance-free SKU: 63438000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m64x4-left-maintenance-free-sku-63438000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M56x4 left maintenance-free SKU: 63437000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m56x4-left-maintenance-free-sku-63437000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M52x3 left maintenance-free SKU: 63436000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m52x3-left-maintenance-free-sku-63436000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M45x3 left maintenance-free SKU: 63435000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m45x3-left-maintenance-free-sku-63435000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M42x3 left maintenance-free SKU: 63434500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m42x3-left-maintenance-free-sku-63434500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M39x3 left maintenance-free SKU: 63434000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m39x3-left-maintenance-free-sku-63434000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M36x3 left maintenance-free SKU: 63433500](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m36x3-left-maintenance-free-sku-63433500/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Rod end GEW DIN 12240-4 series E internal thread M30x2 left maintenance-free SKU: 63433000](https://maedler.in/product/rod-end-gew-din-12240-4-series-e-internal-thread-m30x2-left-maintenance-free-sku-63433000/): Material: Outer part: Zinc-plated. Boreholes up to 10mm: free-cutting steel, turned. From boreholes 12mm: Steel C45, forged. Inner ring: Roller bearing steel 100Cr6, hardened HRC 62+/-1, ground and polished. Bearing race: Steel with PTFE-lining. Small version. Dimensions according to DIN ISO 12240-4 (DIN 648) series E. Thread either right-handed or left-handed. Rod ends for high radial and axial alternating loads. Steel on PTFE-lining. Maintenance-fee. Sliding speed up to 10 m/min. - [Spring plunger M5 type K with ball and slot steel black oxide finished SKU: 65460500](https://maedler.in/product/spring-plunger-m5-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65460500/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M4 type K with ball and slot steel black oxide finished SKU: 65460400](https://maedler.in/product/spring-plunger-m4-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65460400/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M3 type K with ball and slot steel black oxide finished SKU: 65460300](https://maedler.in/product/spring-plunger-m3-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65460300/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Lifting eye nut M24 stainless steel A4 casted SKU: 65459124](https://maedler.in/product/lifting-eye-nut-m24-stainless-steel-a4-casted-sku-65459124/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M20 stainless steel A4 casted SKU: 65459120](https://maedler.in/product/lifting-eye-nut-m20-stainless-steel-a4-casted-sku-65459120/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M16 stainless steel A4 casted SKU: 65459116](https://maedler.in/product/lifting-eye-nut-m16-stainless-steel-a4-casted-sku-65459116/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M12 stainless steel A4 casted SKU: 65459112](https://maedler.in/product/lifting-eye-nut-m12-stainless-steel-a4-casted-sku-65459112/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M10 stainless steel A4 casted SKU: 65459110](https://maedler.in/product/lifting-eye-nut-m10-stainless-steel-a4-casted-sku-65459110/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M8 stainless steel A4 casted SKU: 65459108](https://maedler.in/product/lifting-eye-nut-m8-stainless-steel-a4-casted-sku-65459108/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M6 stainless steel A4 casted SKU: 65459106](https://maedler.in/product/lifting-eye-nut-m6-stainless-steel-a4-casted-sku-65459106/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut DIN 582 M24 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65459024](https://maedler.in/product/lifting-eye-nut-din-582-m24-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65459024/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M20 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65459020](https://maedler.in/product/lifting-eye-nut-din-582-m20-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65459020/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M16 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65459016](https://maedler.in/product/lifting-eye-nut-din-582-m16-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65459016/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M12 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65459012](https://maedler.in/product/lifting-eye-nut-din-582-m12-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65459012/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M10 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65459010](https://maedler.in/product/lifting-eye-nut-din-582-m10-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65459010/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M8 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65459008](https://maedler.in/product/lifting-eye-nut-din-582-m8-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65459008/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M6 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65459006](https://maedler.in/product/lifting-eye-nut-din-582-m6-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65459006/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut M30 stainless steel A2 casted SKU: 65458930](https://maedler.in/product/lifting-eye-nut-m30-stainless-steel-a2-casted-sku-65458930/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M24 stainless steel A2 casted SKU: 65458924](https://maedler.in/product/lifting-eye-nut-m24-stainless-steel-a2-casted-sku-65458924/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M20 stainless steel A2 casted SKU: 65458920](https://maedler.in/product/lifting-eye-nut-m20-stainless-steel-a2-casted-sku-65458920/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M16 stainless steel A2 casted SKU: 65458916](https://maedler.in/product/lifting-eye-nut-m16-stainless-steel-a2-casted-sku-65458916/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M12 stainless steel A2 casted SKU: 65458912](https://maedler.in/product/lifting-eye-nut-m12-stainless-steel-a2-casted-sku-65458912/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M10 stainless steel A2 casted SKU: 65458910](https://maedler.in/product/lifting-eye-nut-m10-stainless-steel-a2-casted-sku-65458910/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M8 stainless steel A2 casted SKU: 65458908](https://maedler.in/product/lifting-eye-nut-m8-stainless-steel-a2-casted-sku-65458908/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut M6 stainless steel A2 casted SKU: 65458906](https://maedler.in/product/lifting-eye-nut-m6-stainless-steel-a2-casted-sku-65458906/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring nuts are not according to DIN 582. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye nut DIN 582 M24 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458824](https://maedler.in/product/lifting-eye-nut-din-582-m24-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458824/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M20 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458820](https://maedler.in/product/lifting-eye-nut-din-582-m20-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458820/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M16 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458816](https://maedler.in/product/lifting-eye-nut-din-582-m16-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458816/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M12 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458812](https://maedler.in/product/lifting-eye-nut-din-582-m12-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458812/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M10 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458810](https://maedler.in/product/lifting-eye-nut-din-582-m10-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458810/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M8 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458808](https://maedler.in/product/lifting-eye-nut-din-582-m8-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458808/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M6 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458806](https://maedler.in/product/lifting-eye-nut-din-582-m6-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458806/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M42 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458742](https://maedler.in/product/lifting-eye-nut-din-582-m42-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458742/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M36 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458736](https://maedler.in/product/lifting-eye-nut-din-582-m36-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458736/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M30 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458730](https://maedler.in/product/lifting-eye-nut-din-582-m30-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458730/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M24 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458724](https://maedler.in/product/lifting-eye-nut-din-582-m24-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458724/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M20 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458720](https://maedler.in/product/lifting-eye-nut-din-582-m20-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458720/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M16 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458716](https://maedler.in/product/lifting-eye-nut-din-582-m16-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458716/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M12 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458712](https://maedler.in/product/lifting-eye-nut-din-582-m12-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458712/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M10 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458710](https://maedler.in/product/lifting-eye-nut-din-582-m10-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458710/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M8 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458708](https://maedler.in/product/lifting-eye-nut-din-582-m8-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458708/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M6 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458706](https://maedler.in/product/lifting-eye-nut-din-582-m6-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458706/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M42 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458642](https://maedler.in/product/lifting-eye-nut-din-582-m42-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458642/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M36 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458636](https://maedler.in/product/lifting-eye-nut-din-582-m36-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458636/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M30 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458630](https://maedler.in/product/lifting-eye-nut-din-582-m30-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458630/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M24 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458624](https://maedler.in/product/lifting-eye-nut-din-582-m24-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458624/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M20 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458620](https://maedler.in/product/lifting-eye-nut-din-582-m20-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458620/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M16 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458616](https://maedler.in/product/lifting-eye-nut-din-582-m16-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458616/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M12 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458612](https://maedler.in/product/lifting-eye-nut-din-582-m12-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458612/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M10 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458610](https://maedler.in/product/lifting-eye-nut-din-582-m10-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458610/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M8 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458608](https://maedler.in/product/lifting-eye-nut-din-582-m8-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458608/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye nut DIN 582 M6 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458606](https://maedler.in/product/lifting-eye-nut-din-582-m6-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458606/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt M24 x 36 stainless steel A4 casted SKU: 65458524](https://maedler.in/product/lifting-eye-bolt-m24-x-36-stainless-steel-a4-casted-sku-65458524/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M20 x 30 stainless steel A4 casted SKU: 65458520](https://maedler.in/product/lifting-eye-bolt-m20-x-30-stainless-steel-a4-casted-sku-65458520/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M16 x 27 stainless steel A4 casted SKU: 65458516](https://maedler.in/product/lifting-eye-bolt-m16-x-27-stainless-steel-a4-casted-sku-65458516/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M12 x 20.5 stainless steel A4 casted SKU: 65458512](https://maedler.in/product/lifting-eye-bolt-m12-x-20-5-stainless-steel-a4-casted-sku-65458512/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M10 x 17 stainless steel A4 casted SKU: 65458510](https://maedler.in/product/lifting-eye-bolt-m10-x-17-stainless-steel-a4-casted-sku-65458510/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M8 x 13 stainless steel A4 casted SKU: 65458508](https://maedler.in/product/lifting-eye-bolt-m8-x-13-stainless-steel-a4-casted-sku-65458508/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M6 x 13 stainless steel A4 casted SKU: 65458506](https://maedler.in/product/lifting-eye-bolt-m6-x-13-stainless-steel-a4-casted-sku-65458506/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt DIN 580 M24 x 36 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65458424](https://maedler.in/product/lifting-eye-bolt-din-580-m24-x-36-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458424/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M20 x 30 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65458420](https://maedler.in/product/lifting-eye-bolt-din-580-m20-x-30-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458420/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M16 x 27 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65458416](https://maedler.in/product/lifting-eye-bolt-din-580-m16-x-27-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458416/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M12 x 20.5 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65458412](https://maedler.in/product/lifting-eye-bolt-din-580-m12-x-20-5-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458412/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M10 x 17 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65458410](https://maedler.in/product/lifting-eye-bolt-din-580-m10-x-17-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458410/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M8 x 13 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65458408](https://maedler.in/product/lifting-eye-bolt-din-580-m8-x-13-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458408/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M6 x 13 stainless steel A4 forged === user information at www.maedler.de in the section Downloads === SKU: 65458406](https://maedler.in/product/lifting-eye-bolt-din-580-m6-x-13-stainless-steel-a4-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458406/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt M24 x 36 stainless steel A2 casted SKU: 65458324](https://maedler.in/product/lifting-eye-bolt-m24-x-36-stainless-steel-a2-casted-sku-65458324/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M20 x 30 stainless steel A2 casted SKU: 65458320](https://maedler.in/product/lifting-eye-bolt-m20-x-30-stainless-steel-a2-casted-sku-65458320/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M16 x 27 stainless steel A2 casted SKU: 65458316](https://maedler.in/product/lifting-eye-bolt-m16-x-27-stainless-steel-a2-casted-sku-65458316/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M12 x 20.5 stainless steel A2 casted SKU: 65458312](https://maedler.in/product/lifting-eye-bolt-m12-x-20-5-stainless-steel-a2-casted-sku-65458312/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M10 x 17 stainless steel A2 casted SKU: 65458310](https://maedler.in/product/lifting-eye-bolt-m10-x-17-stainless-steel-a2-casted-sku-65458310/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M8 x 13 stainless steel A2 casted SKU: 65458308](https://maedler.in/product/lifting-eye-bolt-m8-x-13-stainless-steel-a2-casted-sku-65458308/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt M6 x 13 stainless steel A2 casted SKU: 65458306](https://maedler.in/product/lifting-eye-bolt-m6-x-13-stainless-steel-a2-casted-sku-65458306/): Material: Stainless steel A2 or stainless steel A4, cast, polished.Cost-effective version for many fastening applications, for example in household and garden for light tensioning.Not permitted as lifting device or in safety-relevant areas.Temperature range: -20°C to +200°C. Note: These ring bolts are not according to DIN 580. The load capacity is not like DIN. So, theses parts may only be used for light loads in responsibility of the customer, and never for safety-relevant applications. Depending on the casting company, these parts are marked with the size of thread and / or the manufacturer symbol. - [Lifting eye bolt DIN 580 M24 x 36 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458224](https://maedler.in/product/lifting-eye-bolt-din-580-m24-x-36-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458224/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M20 x 30 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458220](https://maedler.in/product/lifting-eye-bolt-din-580-m20-x-30-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458220/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M16 x 27 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458216](https://maedler.in/product/lifting-eye-bolt-din-580-m16-x-27-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458216/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M12 x 20.5 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458212](https://maedler.in/product/lifting-eye-bolt-din-580-m12-x-20-5-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458212/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M10 x 17 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458210](https://maedler.in/product/lifting-eye-bolt-din-580-m10-x-17-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458210/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M8 x 13 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458208](https://maedler.in/product/lifting-eye-bolt-din-580-m8-x-13-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458208/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M6 x 13 stainless steel A2 forged === user information at www.maedler.de in the section Downloads === SKU: 65458206](https://maedler.in/product/lifting-eye-bolt-din-580-m6-x-13-stainless-steel-a2-forged-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458206/): Material: Stainless steel A2 or stainless steel A4.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M42 x 63 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458142](https://maedler.in/product/lifting-eye-bolt-din-580-m42-x-63-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458142/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M36 x 54 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458136](https://maedler.in/product/lifting-eye-bolt-din-580-m36-x-54-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458136/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M30 x 45 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458130](https://maedler.in/product/lifting-eye-bolt-din-580-m30-x-45-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458130/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M24 x 36 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458124](https://maedler.in/product/lifting-eye-bolt-din-580-m24-x-36-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458124/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M20 x 30 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458120](https://maedler.in/product/lifting-eye-bolt-din-580-m20-x-30-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458120/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M16 x 27 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458116](https://maedler.in/product/lifting-eye-bolt-din-580-m16-x-27-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458116/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M12 x 20.5 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458112](https://maedler.in/product/lifting-eye-bolt-din-580-m12-x-20-5-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458112/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M10 x 17 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458110](https://maedler.in/product/lifting-eye-bolt-din-580-m10-x-17-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458110/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M8 x 13 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458108](https://maedler.in/product/lifting-eye-bolt-din-580-m8-x-13-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458108/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M6 x 13 steel C15E galvanized === user information at www.maedler.de in the section Downloads === SKU: 65458106](https://maedler.in/product/lifting-eye-bolt-din-580-m6-x-13-steel-c15e-galvanized-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458106/): Material: Steel C15E zinc-plated.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M42 x 63 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458042](https://maedler.in/product/lifting-eye-bolt-din-580-m42-x-63-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458042/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M36 x 54 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458036](https://maedler.in/product/lifting-eye-bolt-din-580-m36-x-54-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458036/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M30 x 45 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458030](https://maedler.in/product/lifting-eye-bolt-din-580-m30-x-45-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458030/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M24 x 36 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458024](https://maedler.in/product/lifting-eye-bolt-din-580-m24-x-36-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458024/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M20 x 30 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458020](https://maedler.in/product/lifting-eye-bolt-din-580-m20-x-30-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458020/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M16 x 27 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458016](https://maedler.in/product/lifting-eye-bolt-din-580-m16-x-27-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458016/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M12 x 20.5 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458012](https://maedler.in/product/lifting-eye-bolt-din-580-m12-x-20-5-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458012/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M10 x 17 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458010](https://maedler.in/product/lifting-eye-bolt-din-580-m10-x-17-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458010/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M8 x 13 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458008](https://maedler.in/product/lifting-eye-bolt-din-580-m8-x-13-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458008/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Lifting eye bolt DIN 580 M6 x 13 steel C15E self coloured === user information at www.maedler.de in the section Downloads === SKU: 65458006](https://maedler.in/product/lifting-eye-bolt-din-580-m6-x-13-steel-c15e-self-coloured-user-information-at-www-maedler-de-in-the-section-downloads-sku-65458006/): Material: Steel C15E.For lifting and transport activities.For security areas and high requirement.For permanent attachment to transport parts.With CE marking and user information.Temperature range: -20°C to +200°C. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1500mm long single-start right material 1.4305 rolled SKU: 64099112](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099112/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1500mm long single-start right material 1.4305 rolled SKU: 64099110](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099110/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1000mm long single-start right material 1.4305 machined SKU: 64099050](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1000mm-long-single-start-right-material-1-4305-machined-sku-64099050/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1000mm long single-start right material 1.4305 rolled SKU: 64099040](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099040/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1000mm long single-start right material 1.4305 rolled SKU: 64099036](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099036/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1000mm long single-start right material 1.4305 rolled SKU: 64099030](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099030/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1000mm long single-start right material 1.4305 rolled SKU: 64099028](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099028/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1000mm long single-start right material 1.4305 rolled SKU: 64099024](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099024/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1000mm long single-start right material 1.4305 rolled SKU: 64099020](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099020/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1000mm long single-start right material 1.4305 rolled SKU: 64099018](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099018/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1000mm long single-start right material 1.4305 rolled SKU: 64099016](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099016/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1000mm long single-start right material 1.4305 rolled SKU: 64099014](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099014/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1000mm long single-start right material 1.4305 rolled SKU: 64099012](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099012/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1000mm long single-start right material 1.4305 rolled SKU: 64099010](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1000mm-long-single-start-right-material-1-4305-rolled-sku-64099010/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 3000mm long single-start left material C15 rolled SKU: 64087000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-3000mm-long-single-start-left-material-c15-rolled-sku-64087000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 3000mm long single-start left material C15 rolled SKU: 64086000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-3000mm-long-single-start-left-material-c15-rolled-sku-64086000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 3000mm long single-start left material C15 rolled SKU: 64085200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-3000mm-long-single-start-left-material-c15-rolled-sku-64085200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 3000mm long single-start left material C15 rolled SKU: 64085000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-3000mm-long-single-start-left-material-c15-rolled-sku-64085000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 3000mm long single-start left material C15 rolled SKU: 64084800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-3000mm-long-single-start-left-material-c15-rolled-sku-64084800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 3000mm long single-start left material C15 rolled SKU: 64084400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-3000mm-long-single-start-left-material-c15-rolled-sku-64084400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 3000mm long single-start left material C15 rolled SKU: 64084000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-3000mm-long-single-start-left-material-c15-rolled-sku-64084000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 3000mm long single-start left material C15 rolled SKU: 64083600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-3000mm-long-single-start-left-material-c15-rolled-sku-64083600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 3000mm long single-start left material C15 rolled SKU: 64083200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-3000mm-long-single-start-left-material-c15-rolled-sku-64083200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 3000mm long single-start left material C15 rolled SKU: 64083000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-3000mm-long-single-start-left-material-c15-rolled-sku-64083000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 3000mm long single-start left material C15 rolled SKU: 64082800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-3000mm-long-single-start-left-material-c15-rolled-sku-64082800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 3000mm long single-start left material C15 rolled SKU: 64082400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-3000mm-long-single-start-left-material-c15-rolled-sku-64082400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 3000mm long single-start left material C15 rolled SKU: 64082000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-3000mm-long-single-start-left-material-c15-rolled-sku-64082000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 3000mm long single-start left material C15 rolled SKU: 64081800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 3000mm long single-start left material C15 rolled SKU: 64081600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 3000mm long single-start left material C15 rolled SKU: 64081400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 3000mm long single-start left material C15 rolled SKU: 64081200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 3000mm long single-start left material C15 rolled SKU: 64081000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-3000mm-long-single-start-left-material-c15-rolled-sku-64081000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 2000mm long single-start left material C15 rolled SKU: 64067000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-2000mm-long-single-start-left-material-c15-rolled-sku-64067000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 2000mm long single-start left material C15 rolled SKU: 64066000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-2000mm-long-single-start-left-material-c15-rolled-sku-64066000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 2000mm long single-start left material C15 rolled SKU: 64065200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-2000mm-long-single-start-left-material-c15-rolled-sku-64065200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 2000mm long single-start left material C15 rolled SKU: 64065000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-2000mm-long-single-start-left-material-c15-rolled-sku-64065000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 2000mm long single-start left material C15 rolled SKU: 64064800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-2000mm-long-single-start-left-material-c15-rolled-sku-64064800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 2000mm long single-start left material C15 rolled SKU: 64064400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-2000mm-long-single-start-left-material-c15-rolled-sku-64064400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 2000mm long single-start left material C15 rolled SKU: 64064000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-2000mm-long-single-start-left-material-c15-rolled-sku-64064000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 2000mm long single-start left material C15 rolled SKU: 64063600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-2000mm-long-single-start-left-material-c15-rolled-sku-64063600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 2000mm long single-start left material C15 rolled SKU: 64063200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-2000mm-long-single-start-left-material-c15-rolled-sku-64063200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 2000mm long single-start left material C15 rolled SKU: 64063000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-2000mm-long-single-start-left-material-c15-rolled-sku-64063000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 2000mm long single-start left material C15 rolled SKU: 64062800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-2000mm-long-single-start-left-material-c15-rolled-sku-64062800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 2000mm long single-start left material C15 rolled SKU: 64062400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-2000mm-long-single-start-left-material-c15-rolled-sku-64062400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 2000mm long single-start left material C15 rolled SKU: 64062000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-2000mm-long-single-start-left-material-c15-rolled-sku-64062000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 2000mm long single-start left material C15 rolled SKU: 64061800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 2000mm long single-start left material C15 rolled SKU: 64061600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 2000mm long single-start left material C15 rolled SKU: 64061400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start left material C15 rolled SKU: 64061200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 2000mm long single-start left material C15 rolled SKU: 64061000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-2000mm-long-single-start-left-material-c15-rolled-sku-64061000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 1500mm long single-start left material C15 rolled SKU: 64057000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-1500mm-long-single-start-left-material-c15-rolled-sku-64057000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 1500mm long single-start left material C15 rolled SKU: 64056000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-1500mm-long-single-start-left-material-c15-rolled-sku-64056000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 1500mm long single-start left material C15 rolled SKU: 64055200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-1500mm-long-single-start-left-material-c15-rolled-sku-64055200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1500mm long single-start left material C15 rolled SKU: 64055000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1500mm-long-single-start-left-material-c15-rolled-sku-64055000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 1500mm long single-start left material C15 rolled SKU: 64054800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-1500mm-long-single-start-left-material-c15-rolled-sku-64054800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 1500mm long single-start left material C15 rolled SKU: 64054400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-1500mm-long-single-start-left-material-c15-rolled-sku-64054400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1500mm long single-start left material C15 rolled SKU: 64054000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1500mm-long-single-start-left-material-c15-rolled-sku-64054000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1500mm long single-start left material C15 rolled SKU: 64053600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1500mm-long-single-start-left-material-c15-rolled-sku-64053600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 1500mm long single-start left material C15 rolled SKU: 64053200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-1500mm-long-single-start-left-material-c15-rolled-sku-64053200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1500mm long single-start left material C15 rolled SKU: 64053000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1500mm-long-single-start-left-material-c15-rolled-sku-64053000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1500mm long single-start left material C15 rolled SKU: 64052800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1500mm-long-single-start-left-material-c15-rolled-sku-64052800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1500mm long single-start left material C15 rolled SKU: 64052400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1500mm-long-single-start-left-material-c15-rolled-sku-64052400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1500mm long single-start left material C15 rolled SKU: 64052000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1500mm-long-single-start-left-material-c15-rolled-sku-64052000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1500mm long single-start left material C15 rolled SKU: 64051800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1500mm long single-start left material C15 rolled SKU: 64051600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1500mm long single-start left material C15 rolled SKU: 64051400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1500mm long single-start left material C15 rolled SKU: 64051200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1500mm long single-start left material C15 rolled SKU: 64051000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1500mm-long-single-start-left-material-c15-rolled-sku-64051000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x1000mm long single-start left material C15 rolled SKU: 64047000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x1000mm-long-single-start-left-material-c15-rolled-sku-64047000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 1000mm long single-start left material C15 rolled SKU: 64046000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-1000mm-long-single-start-left-material-c15-rolled-sku-64046000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 1000mm long single-start left material C15 rolled SKU: 64045200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-1000mm-long-single-start-left-material-c15-rolled-sku-64045200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1000mm long single-start left material C15 rolled SKU: 64045000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1000mm-long-single-start-left-material-c15-rolled-sku-64045000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 1000mm long single-start left material C15 rolled SKU: 64044800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-1000mm-long-single-start-left-material-c15-rolled-sku-64044800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 1000mm long single-start left material C15 rolled SKU: 64044400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-1000mm-long-single-start-left-material-c15-rolled-sku-64044400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1000mm long single-start left material C15 rolled SKU: 64044000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1000mm-long-single-start-left-material-c15-rolled-sku-64044000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1000mm long single-start left material C15 rolled SKU: 64043600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1000mm-long-single-start-left-material-c15-rolled-sku-64043600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 1000mm long single-start left material C15 rolled SKU: 64043200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-1000mm-long-single-start-left-material-c15-rolled-sku-64043200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1000mm long single-start left material C15 rolled SKU: 64043000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1000mm-long-single-start-left-material-c15-rolled-sku-64043000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1000 mm long single-start left material C15 rolled SKU: 64042800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1000-mm-long-single-start-left-material-c15-rolled-sku-64042800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1000mm long single-start left material C15 rolled SKU: 64042400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1000mm-long-single-start-left-material-c15-rolled-sku-64042400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1000mm long single-start left material C15 rolled SKU: 64042000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1000mm-long-single-start-left-material-c15-rolled-sku-64042000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1000mm long single-start left material C15 rolled SKU: 64041800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1000mm long single-start left material C15 rolled SKU: 64041600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1000mm long single-start left material C15 rolled SKU: 64041400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1000mm long single-start left material C15 rolled SKU: 64041200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1000mm long single-start left material C15 rolled SKU: 64041000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1000mm-long-single-start-left-material-c15-rolled-sku-64041000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.70 x 10 x 3000mm long single-start right material C15 rolled SKU: 64037000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-70-x-10-x-3000mm-long-single-start-right-material-c15-rolled-sku-64037000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.60 x 9 x 3000mm long single-start right material C15 rolled SKU: 64036000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-60-x-9-x-3000mm-long-single-start-right-material-c15-rolled-sku-64036000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.52 x 8 x 3000mm long single-start right material C15 rolled SKU: 64035200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-52-x-8-x-3000mm-long-single-start-right-material-c15-rolled-sku-64035200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 3000mm long single-start right material C15 rolled SKU: 64035000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-3000mm-long-single-start-right-material-c15-rolled-sku-64035000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.48 x 8 x 3000mm long single-start right material C15 rolled SKU: 64034800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-48-x-8-x-3000mm-long-single-start-right-material-c15-rolled-sku-64034800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.44 x 7 x 3000mm long single-start right material C15 rolled SKU: 64034400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-44-x-7-x-3000mm-long-single-start-right-material-c15-rolled-sku-64034400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 3000mm long single-start right material C15 rolled SKU: 64034000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-3000mm-long-single-start-right-material-c15-rolled-sku-64034000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 3000mm long single-start right material C15 rolled SKU: 64033600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-3000mm-long-single-start-right-material-c15-rolled-sku-64033600/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.32 x 6 x 3000mm long single-start right material C15 rolled SKU: 64033200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-32-x-6-x-3000mm-long-single-start-right-material-c15-rolled-sku-64033200/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 3000mm long single-start right material C15 rolled SKU: 64033000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-3000mm-long-single-start-right-material-c15-rolled-sku-64033000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 3000mm long single-start right material C15 rolled SKU: 64032800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-3000mm-long-single-start-right-material-c15-rolled-sku-64032800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 3000mm long single-start right material C15 rolled SKU: 64032400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-3000mm-long-single-start-right-material-c15-rolled-sku-64032400/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 3000mm long single-start right material C15 rolled SKU: 64032000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-3000mm-long-single-start-right-material-c15-rolled-sku-64032000/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 3000mm long single-start right material C15 rolled SKU: 64031800](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-3000mm-long-single-start-right-material-c15-rolled-sku-64031800/): Material: C15, rolled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Spring plunger M16 with moving ball and internal hexagon strong spring tension steel black oxide finished SKU: 65491600VB](https://maedler.in/product/spring-plunger-m16-with-moving-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65491600vb/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M16 with ball and internal hexagon strong spring tension steel black oxide finished SKU: 65491600V](https://maedler.in/product/spring-plunger-m16-with-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65491600v/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M16 with moving ball and internal hexagon steel black oxide finished SKU: 65491600B](https://maedler.in/product/spring-plunger-m16-with-moving-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65491600b/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M16 with ball and internal hexagon steel black oxide finished SKU: 65491600](https://maedler.in/product/spring-plunger-m16-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65491600/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M12 with moving ball and internal hexagon strong spring tension steel black oxide finished SKU: 65491200VB](https://maedler.in/product/spring-plunger-m12-with-moving-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65491200vb/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M12 with ball and internal hexagon strong spring tension steel black oxide finished SKU: 65491200V](https://maedler.in/product/spring-plunger-m12-with-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65491200v/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M12 with moving ball and internal hexagon steel black oxide finished SKU: 65491200B](https://maedler.in/product/spring-plunger-m12-with-moving-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65491200b/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M12 with ball and internal hexagon steel black oxide finished SKU: 65491200](https://maedler.in/product/spring-plunger-m12-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65491200/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M10 with moving ball and internal hexagon strong spring tension steel black oxide finished SKU: 65491000VB](https://maedler.in/product/spring-plunger-m10-with-moving-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65491000vb/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M10 with ball and internal hexagon strong spring tension steel black oxide finished SKU: 65491000V](https://maedler.in/product/spring-plunger-m10-with-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65491000v/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M10 with moving ball and internal hexagon steel black oxide finished SKU: 65491000B](https://maedler.in/product/spring-plunger-m10-with-moving-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65491000b/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M10 with ball and internal hexagon steel black oxide finished SKU: 65491000](https://maedler.in/product/spring-plunger-m10-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65491000/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M8 with moving ball and internal hexagon strong spring tension steel black oxide finished SKU: 65490800VB](https://maedler.in/product/spring-plunger-m8-with-moving-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65490800vb/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M8 with ball and internal hexagon strong spring tension steel black oxide finished SKU: 65490800V](https://maedler.in/product/spring-plunger-m8-with-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65490800v/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M8 with moving ball and internal hexagon steel black oxide finished SKU: 65490800B](https://maedler.in/product/spring-plunger-m8-with-moving-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65490800b/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M8 with ball and internal hexagon steel black oxide finished SKU: 65490800](https://maedler.in/product/spring-plunger-m8-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65490800/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M6 with moving ball and internal hexagon strong spring tension steel black oxide finished SKU: 65490600VB](https://maedler.in/product/spring-plunger-m6-with-moving-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65490600vb/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M6 with ball and internal hexagon strong spring tension steel black oxide finished SKU: 65490600V](https://maedler.in/product/spring-plunger-m6-with-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65490600v/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M6 with moving ball and internal hexagon steel black oxide finished SKU: 65490600B](https://maedler.in/product/spring-plunger-m6-with-moving-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65490600b/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M6 with ball and internal hexagon steel black oxide finished SKU: 65490600](https://maedler.in/product/spring-plunger-m6-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65490600/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M5 with moving ball and internal hexagon strong spring tension steel black oxide finished SKU: 65490500VB](https://maedler.in/product/spring-plunger-m5-with-moving-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65490500vb/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M5 with ball and internal hexagon strong spring tension steel black oxide finished SKU: 65490500V](https://maedler.in/product/spring-plunger-m5-with-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65490500v/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M5 with moving ball and internal hexagon steel black oxide finished SKU: 65490500B](https://maedler.in/product/spring-plunger-m5-with-moving-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65490500b/): Material type black oxided: Body: steel, black oxide finish. Ball: hardended. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M5 with ball and internal hexagon steel black oxide finished SKU: 65490500](https://maedler.in/product/spring-plunger-m5-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65490500/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M4 with ball and internal hexagon strong spring tension steel black oxide finished SKU: 65490400V](https://maedler.in/product/spring-plunger-m4-with-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65490400v/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M4 with ball and internal hexagon steel black oxide finished SKU: 65490400](https://maedler.in/product/spring-plunger-m4-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65490400/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M3 with ball and internal hexagon steel black oxide finished SKU: 65490300](https://maedler.in/product/spring-plunger-m3-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65490300/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger double ended outer diameter 8mm SKU: 65484800](https://maedler.in/product/spring-plunger-double-ended-outer-diameter-8mm-sku-65484800/): Material: Body: Brass. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range: -40°C to +250°C. Note: To fix or secure axles and bolts and as electronic contact. *statistical average - [Spring plunger double ended outer diameter 7mm SKU: 65484700](https://maedler.in/product/spring-plunger-double-ended-outer-diameter-7mm-sku-65484700/): Material: Body: Brass. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range: -40°C to +250°C. Note: To fix or secure axles and bolts and as electronic contact. *statistical average - [Spring plunger double ended outer diameter 5mm SKU: 65484500](https://maedler.in/product/spring-plunger-double-ended-outer-diameter-5mm-sku-65484500/): Material: Body: Brass. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range: -40°C to +250°C. Note: To fix or secure axles and bolts and as electronic contact. *statistical average - [Spring plunger double ended outer diameter 4mm SKU: 65484400](https://maedler.in/product/spring-plunger-double-ended-outer-diameter-4mm-sku-65484400/): Material: Body: Brass. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range: -40°C to +250°C. Note: To fix or secure axles and bolts and as electronic contact. *statistical average - [Spring plunger double ended outer diameter 3mm SKU: 65484300](https://maedler.in/product/spring-plunger-double-ended-outer-diameter-3mm-sku-65484300/): Material: Body: Brass. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range: -40°C to +250°C. Note: To fix or secure axles and bolts and as electronic contact. *statistical average - [Spring plunger M24 with ball and slot steel black oxide finished strong spring pressure SKU: 65482400](https://maedler.in/product/spring-plunger-m24-with-ball-and-slot-steel-black-oxide-finished-strong-spring-pressure-sku-65482400/): Material: Body: Steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M20 with ball and slot steel black oxide finished strong spring pressure SKU: 65482000](https://maedler.in/product/spring-plunger-m20-with-ball-and-slot-steel-black-oxide-finished-strong-spring-pressure-sku-65482000/): Material: Body: Steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M16 with moving ball and slot strong spring tension steel black oxide finished SKU: 65481600B](https://maedler.in/product/spring-plunger-m16-with-moving-ball-and-slot-strong-spring-tension-steel-black-oxide-finished-sku-65481600b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M16 with ball and slot steel black oxide finished strong spring pressure SKU: 65481600](https://maedler.in/product/spring-plunger-m16-with-ball-and-slot-steel-black-oxide-finished-strong-spring-pressure-sku-65481600/): Material: Body: Steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M12 with moving ball and slot strong spring tension steel black oxide finished SKU: 65481200B](https://maedler.in/product/spring-plunger-m12-with-moving-ball-and-slot-strong-spring-tension-steel-black-oxide-finished-sku-65481200b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M12 with ball and slot steel black oxide finished strong spring pressure SKU: 65481200](https://maedler.in/product/spring-plunger-m12-with-ball-and-slot-steel-black-oxide-finished-strong-spring-pressure-sku-65481200/): Material: Body: Steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M10 with moving ball and slot strong spring tension steel black oxide finished SKU: 65481000B](https://maedler.in/product/spring-plunger-m10-with-moving-ball-and-slot-strong-spring-tension-steel-black-oxide-finished-sku-65481000b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M10 with ball and slot steel black oxide finished strong spring pressure SKU: 65481000](https://maedler.in/product/spring-plunger-m10-with-ball-and-slot-steel-black-oxide-finished-strong-spring-pressure-sku-65481000/): Material: Body: Steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M8 with moving ball and slot strong spring tension steel black oxide finished SKU: 65480800B](https://maedler.in/product/spring-plunger-m8-with-moving-ball-and-slot-strong-spring-tension-steel-black-oxide-finished-sku-65480800b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M8 with ball and slot steel black oxide finished strong spring pressure SKU: 65480800](https://maedler.in/product/spring-plunger-m8-with-ball-and-slot-steel-black-oxide-finished-strong-spring-pressure-sku-65480800/): Material: Body: Steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M6 with moving ball and slot strong spring tension steel black oxide finished SKU: 65480600B](https://maedler.in/product/spring-plunger-m6-with-moving-ball-and-slot-strong-spring-tension-steel-black-oxide-finished-sku-65480600b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M6 with ball and slot steel black oxide finished strong spring pressure SKU: 65480600](https://maedler.in/product/spring-plunger-m6-with-ball-and-slot-steel-black-oxide-finished-strong-spring-pressure-sku-65480600/): Material: Body: Steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M5 with moving ball and slot strong spring tension steel black oxide finished SKU: 65480500B](https://maedler.in/product/spring-plunger-m5-with-moving-ball-and-slot-strong-spring-tension-steel-black-oxide-finished-sku-65480500b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M5 with ball and slot steel black oxide finished strong spring pressure SKU: 65480500](https://maedler.in/product/spring-plunger-m5-with-ball-and-slot-steel-black-oxide-finished-strong-spring-pressure-sku-65480500/): Material: Body: Steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger d1=12mm type GP smooth with collar plunger made from POM ball made from stainless steel SKU: 65479200](https://maedler.in/product/spring-plunger-d112mm-type-gp-smooth-with-collar-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65479200/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=10mm type GP smooth with collar plunger made from POM ball made from stainless steel SKU: 65479000](https://maedler.in/product/spring-plunger-d110mm-type-gp-smooth-with-collar-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65479000/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=8mm type GP smooth with collar plunger made from POM ball made from stainless steel SKU: 65478800](https://maedler.in/product/spring-plunger-d18mm-type-gp-smooth-with-collar-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65478800/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=6mm type GP smooth with collar plunger made from POM ball made from stainless steel SKU: 65478600](https://maedler.in/product/spring-plunger-d16mm-type-gp-smooth-with-collar-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65478600/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=5mm type GP smooth with collar plunger made from POM ball made from stainless steel SKU: 65478500](https://maedler.in/product/spring-plunger-d15mm-type-gp-smooth-with-collar-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65478500/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=3mm type GP smooth with collar plunger made from POM ball made from stainless steel SKU: 65478403](https://maedler.in/product/spring-plunger-d13mm-type-gp-smooth-with-collar-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65478403/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=4mm type GP smooth with collar plunger made from POM ball made from stainless steel SKU: 65478400](https://maedler.in/product/spring-plunger-d14mm-type-gp-smooth-with-collar-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65478400/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger M10 type P with ball and slot plunger and ball made from POM SKU: 65473000](https://maedler.in/product/spring-plunger-m10-type-p-with-ball-and-slot-plunger-and-ball-made-from-pom-sku-65473000/): Material: Body: POM, blue. Ball made from hardened stainless steel or of POM, white. Spring: Stainless steel Type N: Ball made from stainless steel Type P: Ball made from POM Note: These parts are used in applications where, e.g., electrical conductivity is not desired or in aggressive environments. Temperature range -30°C to +50°C. *statistical average - [Spring plunger M8 type P with ball and slot plunger and ball made from POM SKU: 65472800](https://maedler.in/product/spring-plunger-m8-type-p-with-ball-and-slot-plunger-and-ball-made-from-pom-sku-65472800/): Material: Body: POM, blue. Ball made from hardened stainless steel or of POM, white. Spring: Stainless steel Type N: Ball made from stainless steel Type P: Ball made from POM Note: These parts are used in applications where, e.g., electrical conductivity is not desired or in aggressive environments. Temperature range -30°C to +50°C. *statistical average - [Spring plunger M6 type P with ball and slot plunger and ball made from POM SKU: 65472600](https://maedler.in/product/spring-plunger-m6-type-p-with-ball-and-slot-plunger-and-ball-made-from-pom-sku-65472600/): Material: Body: POM, blue. Ball made from hardened stainless steel or of POM, white. Spring: Stainless steel Type N: Ball made from stainless steel Type P: Ball made from POM Note: These parts are used in applications where, e.g., electrical conductivity is not desired or in aggressive environments. Temperature range -30°C to +50°C. *statistical average - [Spring plunger M10 type N with ball and slot plunger made from POM ball made from stainless steel SKU: 65471000](https://maedler.in/product/spring-plunger-m10-type-n-with-ball-and-slot-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65471000/): Material: Body: POM, blue. Ball made from hardened stainless steel or of POM, white. Spring: Stainless steel Type N: Ball made from stainless steel Type P: Ball made from POM Note: These parts are used in applications where, e.g., electrical conductivity is not desired or in aggressive environments. Temperature range -30°C to +50°C. *statistical average - [Spring plunger M8 type N with ball and slot plunger made from POM ball made from stainless steel SKU: 65470800](https://maedler.in/product/spring-plunger-m8-type-n-with-ball-and-slot-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65470800/): Material: Body: POM, blue. Ball made from hardened stainless steel or of POM, white. Spring: Stainless steel Type N: Ball made from stainless steel Type P: Ball made from POM Note: These parts are used in applications where, e.g., electrical conductivity is not desired or in aggressive environments. Temperature range -30°C to +50°C. *statistical average - [Spring plunger M6 type N with ball and slot plunger made from POM ball made from stainless steel SKU: 65470600](https://maedler.in/product/spring-plunger-m6-type-n-with-ball-and-slot-plunger-made-from-pom-ball-made-from-stainless-steel-sku-65470600/): Material: Body: POM, blue. Ball made from hardened stainless steel or of POM, white. Spring: Stainless steel Type N: Ball made from stainless steel Type P: Ball made from POM Note: These parts are used in applications where, e.g., electrical conductivity is not desired or in aggressive environments. Temperature range -30°C to +50°C. *statistical average - [Spring plunger M24 type A with bolt and hexagon socket steel black oxide finished SKU: 65467400](https://maedler.in/product/spring-plunger-m24-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65467400/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M12 type ASV with ball and with internal hexagon strong spring tension steel black oxide finished SKU: 65467200V](https://maedler.in/product/spring-plunger-m12-type-asv-with-ball-and-with-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65467200v/): Material: Type ASV: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, strong spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M12 type AS with ball and with internal hexagon steel black oxide finished SKU: 65467200](https://maedler.in/product/spring-plunger-m12-type-as-with-ball-and-with-internal-hexagon-steel-black-oxide-finished-sku-65467200/): Material: Type AS: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M10 type AS with ball and with internal hexagon steel black oxide finished SKU: 65467100](https://maedler.in/product/spring-plunger-m10-type-as-with-ball-and-with-internal-hexagon-steel-black-oxide-finished-sku-65467100/): Material: Type AS: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M10 type ASV with ball and with internal hexagon strong spring tension steel black oxide finished SKU: 65467000V](https://maedler.in/product/spring-plunger-m10-type-asv-with-ball-and-with-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65467000v/): Material: Type ASV: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, strong spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M20 type A with bolt and hexagon socket steel black oxide finished SKU: 65467000](https://maedler.in/product/spring-plunger-m20-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65467000/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M8 type ASV with ball and with internal hexagon strong spring tension steel black oxide finished SKU: 65466800V](https://maedler.in/product/spring-plunger-m8-type-asv-with-ball-and-with-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65466800v/): Material: Type ASV: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, strong spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M8 type AS with ball and with internal hexagon steel black oxide finished SKU: 65466800](https://maedler.in/product/spring-plunger-m8-type-as-with-ball-and-with-internal-hexagon-steel-black-oxide-finished-sku-65466800/): Material: Type AS: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M6 type AS with ball and with internal hexagon steel black oxide finished SKU: 65466700](https://maedler.in/product/spring-plunger-m6-type-as-with-ball-and-with-internal-hexagon-steel-black-oxide-finished-sku-65466700/): Material: Type AS: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M6 type ASV with ball and with internal hexagon strong spring tension steel black oxide finished SKU: 65466600V](https://maedler.in/product/spring-plunger-m6-type-asv-with-ball-and-with-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65466600v/): Material: Type ASV: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, strong spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M16 type A with bolt and hexagon socket steel black oxide finished SKU: 65466600](https://maedler.in/product/spring-plunger-m16-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65466600/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M5 type ASV with ball and with internal hexagon strong spring tension steel black oxide finished SKU: 65466500V](https://maedler.in/product/spring-plunger-m5-type-asv-with-ball-and-with-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65466500v/): Material: Type ASV: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, strong spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M5 type AS with ball and with internal hexagon steel black oxide finished SKU: 65466500](https://maedler.in/product/spring-plunger-m5-type-as-with-ball-and-with-internal-hexagon-steel-black-oxide-finished-sku-65466500/): Material: Type AS: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M4 type ASV with ball and with internal hexagon strong spring tension steel black oxide finished SKU: 65466400V](https://maedler.in/product/spring-plunger-m4-type-asv-with-ball-and-with-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65466400v/): Material: Type ASV: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, strong spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M4 type AS with ball and with internal hexagon steel black oxide finished SKU: 65466400](https://maedler.in/product/spring-plunger-m4-type-as-with-ball-and-with-internal-hexagon-steel-black-oxide-finished-sku-65466400/): Material: Type AS: Body: Steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M12 type A with bolt and hexagon socket steel black oxide finished SKU: 65466200](https://maedler.in/product/spring-plunger-m12-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65466200/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M10 type A with bolt and hexagon socket steel black oxide finished SKU: 65466000](https://maedler.in/product/spring-plunger-m10-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65466000/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M8 type A with bolt and hexagon socket steel black oxide finished SKU: 65465800](https://maedler.in/product/spring-plunger-m8-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65465800/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M6 type A with bolt and hexagon socket steel black oxide finished SKU: 65465600](https://maedler.in/product/spring-plunger-m6-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65465600/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M5 type A with bolt and hexagon socket steel black oxide finished SKU: 65465500](https://maedler.in/product/spring-plunger-m5-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65465500/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M4 type A with bolt and hexagon socket steel black oxide finished SKU: 65465400](https://maedler.in/product/spring-plunger-m4-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65465400/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M3 type A with bolt and hexagon socket steel black oxide finished SKU: 65465300](https://maedler.in/product/spring-plunger-m3-type-a-with-bolt-and-hexagon-socket-steel-black-oxide-finished-sku-65465300/): Material: Body: Free cutting steel, black oxide finish. Bolt: Steel, hardened. Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M12 type A with ball and head steel black oxide finished SKU: 65464200](https://maedler.in/product/spring-plunger-m12-type-a-with-ball-and-head-steel-black-oxide-finished-sku-65464200/): Material: Body: Free cutting steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M10 type A with ball and head steel black oxide finished SKU: 65464000](https://maedler.in/product/spring-plunger-m10-type-a-with-ball-and-head-steel-black-oxide-finished-sku-65464000/): Material: Body: Free cutting steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M8 type A with ball and head steel black oxide finished SKU: 65463800](https://maedler.in/product/spring-plunger-m8-type-a-with-ball-and-head-steel-black-oxide-finished-sku-65463800/): Material: Body: Free cutting steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M6 type A with ball and head steel black oxide finished SKU: 65463600](https://maedler.in/product/spring-plunger-m6-type-a-with-ball-and-head-steel-black-oxide-finished-sku-65463600/): Material: Body: Free cutting steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M5 type A with ball and head steel black oxide finished SKU: 65463500](https://maedler.in/product/spring-plunger-m5-type-a-with-ball-and-head-steel-black-oxide-finished-sku-65463500/): Material: Body: Free cutting steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M4 type A with ball and head steel black oxide finished SKU: 65463400](https://maedler.in/product/spring-plunger-m4-type-a-with-ball-and-head-steel-black-oxide-finished-sku-65463400/): Material: Body: Free cutting steel, black oxide finish. Ball: Ball bearing steel, hardened. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M24 type K with ball and slot steel black oxide finished SKU: 65462400](https://maedler.in/product/spring-plunger-m24-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65462400/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M20 type K with ball and slot steel black oxide finished SKU: 65462000](https://maedler.in/product/spring-plunger-m20-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65462000/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M16 with moving ball and slot spring tension normal steel black oxide finished SKU: 65461600B](https://maedler.in/product/spring-plunger-m16-with-moving-ball-and-slot-spring-tension-normal-steel-black-oxide-finished-sku-65461600b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M16 type K with ball and slot steel black oxide finished SKU: 65461600](https://maedler.in/product/spring-plunger-m16-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65461600/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M12 with moving ball and slot spring tension normal steel black oxide finished SKU: 65461200B](https://maedler.in/product/spring-plunger-m12-with-moving-ball-and-slot-spring-tension-normal-steel-black-oxide-finished-sku-65461200b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M12 type K with ball and slot steel black oxide finished SKU: 65461200](https://maedler.in/product/spring-plunger-m12-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65461200/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M10 with moving ball and slot spring tension normal steel black oxide finished SKU: 65461000B](https://maedler.in/product/spring-plunger-m10-with-moving-ball-and-slot-spring-tension-normal-steel-black-oxide-finished-sku-65461000b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M10 type K with ball and slot steel black oxide finished SKU: 65461000](https://maedler.in/product/spring-plunger-m10-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65461000/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M8 with moving ball and slot spring tension normal steel black oxide finished SKU: 65460800B](https://maedler.in/product/spring-plunger-m8-with-moving-ball-and-slot-spring-tension-normal-steel-black-oxide-finished-sku-65460800b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M8 type K with ball and slot steel black oxide finished SKU: 65460800](https://maedler.in/product/spring-plunger-m8-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65460800/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M6 with moving ball and slot spring tension normal steel black oxide finished SKU: 65460600B](https://maedler.in/product/spring-plunger-m6-with-moving-ball-and-slot-spring-tension-normal-steel-black-oxide-finished-sku-65460600b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M6 type K with ball and slot steel black oxide finished SKU: 65460600](https://maedler.in/product/spring-plunger-m6-type-k-with-ball-and-slot-steel-black-oxide-finished-sku-65460600/): Material: Body: Free cutting steel, black oxide finish. Ball: Hardened. Spring: Stainless steel. Standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M5 with moving ball and slot spring tension normal steel black oxide finished SKU: 65460500B](https://maedler.in/product/spring-plunger-m5-with-moving-ball-and-slot-spring-tension-normal-steel-black-oxide-finished-sku-65460500b/): Material: Body: steel, black oxide finish. Ball: Steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 2000mm long double-thread right material C15 rolled SKU: 64524000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64524000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 2000mm long double-thread right material C15 rolled SKU: 64523000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64523000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 2000mm long double-thread right material C15 rolled SKU: 64522400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64522400/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 2000mm long double-thread right material C15 rolled SKU: 64522000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64522000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 2000mm long double-thread right material C15 rolled SKU: 64521600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64521600/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 2000mm long double-thread right material C15 rolled SKU: 64521200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-2000mm-long-double-thread-right-material-c15-rolled-sku-64521200/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 1500mm long double-thread right material C15 rolled SKU: 64514000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64514000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 1500mm long double-thread right material C15 rolled SKU: 64513000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64513000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 1500mm long double-thread right material C15 rolled SKU: 64512400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64512400/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 1500mm long double-thread right material C15 rolled SKU: 64512000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64512000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 1500mm long double-thread right material C15 rolled SKU: 64511600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64511600/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 1500mm long double-thread right material C15 rolled SKU: 64511200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-1500mm-long-double-thread-right-material-c15-rolled-sku-64511200/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 1000mm long double-thread right material C15 rolled SKU: 64504000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64504000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x1000 mm long double-thread right material C15 rolled SKU: 64503000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x1000-mm-long-double-thread-right-material-c15-rolled-sku-64503000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 1000mm long double-thread right material C15 rolled SKU: 64502400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64502400/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 1000mm long double-thread right material C15 rolled SKU: 64502000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64502000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 1000mm long double-thread right material C15 rolled SKU: 64501600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64501600/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 1000mm long double-thread right material C15 rolled SKU: 64501200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-1000mm-long-double-thread-right-material-c15-rolled-sku-64501200/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 3000mm long single-start left material 1.4305 machined SKU: 64099850](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-3000mm-long-single-start-left-material-1-4305-machined-sku-64099850/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 3000mm long single-start left material 1.4305 rolled SKU: 64099840](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099840/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 3000mm long single-start left material 1.4305 rolled SKU: 64099836](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099836/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 3000mm long single-start left material 1.4305 rolled SKU: 64099830](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099830/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 3000mm long single-start left material 1.4305 rolled SKU: 64099828](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099828/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 3000mm long single-start left material 1.4305 rolled SKU: 64099824](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099824/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 3000mm long single-start left material 1.4305 rolled SKU: 64099820](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099820/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 3000mm long single-start left material 1.4305 rolled SKU: 64099818](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099818/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 3000mm long single-start left material 1.4305 rolled SKU: 64099816](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099816/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 3000mm long single-start left material 1.4305 rolled SKU: 64099814](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099814/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 3000mm long single-start left material 1.4305 rolled SKU: 64099812](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099812/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 3000mm long single-start left material 1.4305 rolled SKU: 64099810](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-3000mm-long-single-start-left-material-1-4305-rolled-sku-64099810/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 2000mm long single-start left material 1.4305 machined SKU: 64099650](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-2000mm-long-single-start-left-material-1-4305-machined-sku-64099650/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 2000mm long single-start left material 1.4305 rolled SKU: 64099640](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099640/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 2000mm long single-start left material 1.4305 rolled SKU: 64099636](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099636/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 2000mm long single-start left material 1.4305 rolled SKU: 64099630](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099630/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 2000mm long single-start left material 1.4305 rolled SKU: 64099628](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099628/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 2000mm long single-start left material 1.4305 rolled SKU: 64099624](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099624/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 2000mm long single-start left material 1.4305 rolled SKU: 64099620](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099620/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 2000mm long single-start left material 1.4305 rolled SKU: 64099618](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099618/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 2000mm long single-start left material 1.4305 rolled SKU: 64099616](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099616/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 2000mm long single-start left material 1.4305 rolled SKU: 64099614](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099614/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start left material 1.4305 rolled SKU: 64099612](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099612/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 2000mm long single-start left material 1.4305 rolled SKU: 64099610](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-2000mm-long-single-start-left-material-1-4305-rolled-sku-64099610/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1500mm long single-start left material 1.4305 machined SKU: 64099550](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1500mm-long-single-start-left-material-1-4305-machined-sku-64099550/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1500mm long single-start left material 1.4305 rolled SKU: 64099540](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099540/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1500mm long single-start left material 1.4305 rolled SKU: 64099536](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099536/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1500mm long single-start left material 1.4305 rolled SKU: 64099530](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099530/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1500mm long single-start left material 1.4305 rolled SKU: 64099528](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099528/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1500mm long single-start left material 1.4305 rolled SKU: 64099524](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099524/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1500mm long single-start left material 1.4305 rolled SKU: 64099520](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099520/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1500mm long single-start left material 1.4305 rolled SKU: 64099518](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099518/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1500mm long single-start left material 1.4305 rolled SKU: 64099516](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099516/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1500mm long single-start left material 1.4305 rolled SKU: 64099514](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099514/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1500mm long single-start left material 1.4305 rolled SKU: 64099512](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099512/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1500mm long single-start left material 1.4305 rolled SKU: 64099510](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1500mm-long-single-start-left-material-1-4305-rolled-sku-64099510/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1000mm long single-start left material 1.4305 machined SKU: 64099450](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1000mm-long-single-start-left-material-1-4305-machined-sku-64099450/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1000mm long single-start left material 1.4305 rolled SKU: 64099440](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099440/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1000mm long single-start left material 1.4305 rolled SKU: 64099436](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099436/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1000mm long single-start left material 1.4305 rolled SKU: 64099430](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099430/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1000mm long single-start left material 1.4305 rolled SKU: 64099428](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099428/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1000mm long single-start left material 1.4305 rolled SKU: 64099424](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099424/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1000mm long single-start left material 1.4305 rolled SKU: 64099420](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099420/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1000mm long single-start left material 1.4305 rolled SKU: 64099418](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099418/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1000mm long single-start left material 1.4305 rolled SKU: 64099416](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099416/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1000mm long single-start left material 1.4305 rolled SKU: 64099414](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099414/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 1000mm long single-start left material 1.4305 rolled SKU: 64099412](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099412/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 1000mm long single-start left material 1.4305 rolled SKU: 64099410](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-1000mm-long-single-start-left-material-1-4305-rolled-sku-64099410/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 3000mm long single-start right material 1.4305 machined SKU: 64099350](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-3000mm-long-single-start-right-material-1-4305-machined-sku-64099350/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 3000mm long single-start right material 1.4305 rolled SKU: 64099340](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099340/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 3000mm long single-start right material 1.4305 rolled SKU: 64099336](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099336/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 3000mm long single-start right material 1.4305 rolled SKU: 64099330](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099330/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 3000mm long single-start right material 1.4305 rolled SKU: 64099328](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099328/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 3000mm long single-start right material 1.4305 rolled SKU: 64099324](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099324/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 3000mm long single-start right material 1.4305 rolled SKU: 64099320](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099320/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 3000mm long single-start right material 1.4305 rolled SKU: 64099318](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099318/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 3000mm long single-start right material 1.4305 rolled SKU: 64099316](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099316/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 3000mm long single-start right material 1.4305 rolled SKU: 64099314](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099314/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 3000mm long single-start right material 1.4305 rolled SKU: 64099312](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099312/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 3000mm long single-start right material 1.4305 rolled SKU: 64099310](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-3000mm-long-single-start-right-material-1-4305-rolled-sku-64099310/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 2000mm long single-start right material 1.4305 machined SKU: 64099250](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-2000mm-long-single-start-right-material-1-4305-machined-sku-64099250/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 2000mm long single-start right material 1.4305 rolled SKU: 64099240](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099240/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 2000mm long single-start right material 1.4305 rolled SKU: 64099236](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099236/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 2000mm long single-start right material 1.4305 rolled SKU: 64099230](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099230/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 2000mm long single-start right material 1.4305 rolled SKU: 64099228](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099228/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 2000mm long single-start right material 1.4305 rolled SKU: 64099224](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099224/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 2000mm long single-start right material 1.4305 rolled SKU: 64099220](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099220/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 2000mm long single-start right material 1.4305 rolled SKU: 64099218](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099218/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 2000mm long single-start right material 1.4305 rolled SKU: 64099216](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099216/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 2000mm long single-start right material 1.4305 rolled SKU: 64099214](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099214/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 3 x 2000mm long single-start right material 1.4305 rolled SKU: 64099212](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-3-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099212/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.10 x 3 x 2000mm long single-start right material 1.4305 rolled SKU: 64099210](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-10-x-3-x-2000mm-long-single-start-right-material-1-4305-rolled-sku-64099210/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.50 x 8 x 1500mm long single-start right material 1.4305 machined SKU: 64099150](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-50-x-8-x-1500mm-long-single-start-right-material-1-4305-machined-sku-64099150/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 7 x 1500mm long single-start right material 1.4305 rolled SKU: 64099140](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-7-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099140/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.36 x 6 x 1500mm long single-start right material 1.4305 rolled SKU: 64099136](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-36-x-6-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099136/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 6 x 1500mm long single-start right material 1.4305 rolled SKU: 64099130](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-6-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099130/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.28 x 5 x 1500mm long single-start right material 1.4305 rolled SKU: 64099128](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-28-x-5-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099128/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 5 x 1500mm long single-start right material 1.4305 rolled SKU: 64099124](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-5-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099124/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 4 x 1500mm long single-start right material 1.4305 rolled SKU: 64099120](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-4-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099120/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.18 x 4 x 1500mm long single-start right material 1.4305 rolled SKU: 64099118](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-18-x-4-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099118/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 4 x 1500mm long single-start right material 1.4305 rolled SKU: 64099116](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-4-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099116/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.14 x 4 x 1500mm long single-start right material 1.4305 rolled SKU: 64099114](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-14-x-4-x-1500mm-long-single-start-right-material-1-4305-rolled-sku-64099114/): Material: 1.4305 (AISI 303). Up to size Tr. 40 x 7 rolled, above whirled. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Spring plunger M5 with moving ball and internal hexagon strong spring tension stainless steel SKU: 65499905VB](https://maedler.in/product/spring-plunger-m5-with-moving-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499905vb/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M5 with ball and internal hexagon strong spring tension stainless steel SKU: 65499905V](https://maedler.in/product/spring-plunger-m5-with-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499905v/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M5 with moving ball and internal hexagon stainless steel SKU: 65499905B](https://maedler.in/product/spring-plunger-m5-with-moving-ball-and-internal-hexagon-stainless-steel-sku-65499905b/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M5 with ball and internal hexagon stainless steel SKU: 65499905](https://maedler.in/product/spring-plunger-m5-with-ball-and-internal-hexagon-stainless-steel-sku-65499905/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M4 with ball and internal hexagon strong spring tension stainless steel SKU: 65499904V](https://maedler.in/product/spring-plunger-m4-with-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499904v/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M4 with ball and internal hexagon stainless steel SKU: 65499904](https://maedler.in/product/spring-plunger-m4-with-ball-and-internal-hexagon-stainless-steel-sku-65499904/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M3 with ball and internal hexagon stainless steel SKU: 65499903](https://maedler.in/product/spring-plunger-m3-with-ball-and-internal-hexagon-stainless-steel-sku-65499903/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M24 with ball and slot stainless steel strong spring tension SKU: 65499824](https://maedler.in/product/spring-plunger-m24-with-ball-and-slot-stainless-steel-strong-spring-tension-sku-65499824/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M20 with ball and slot stainless steel strong spring tension SKU: 65499820](https://maedler.in/product/spring-plunger-m20-with-ball-and-slot-stainless-steel-strong-spring-tension-sku-65499820/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M16 with moving ball and slot strong spring tension stainless steel SKU: 65499816B](https://maedler.in/product/spring-plunger-m16-with-moving-ball-and-slot-strong-spring-tension-stainless-steel-sku-65499816b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M16 with ball and slot stainless steel strong spring tension SKU: 65499816](https://maedler.in/product/spring-plunger-m16-with-ball-and-slot-stainless-steel-strong-spring-tension-sku-65499816/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M12 with moving ball and slot strong spring tension stainless steel SKU: 65499812B](https://maedler.in/product/spring-plunger-m12-with-moving-ball-and-slot-strong-spring-tension-stainless-steel-sku-65499812b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M12 with ball and slot stainless steel strong spring tension SKU: 65499812](https://maedler.in/product/spring-plunger-m12-with-ball-and-slot-stainless-steel-strong-spring-tension-sku-65499812/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M10 with moving ball and slot strong spring tension stainless steel SKU: 65499810B](https://maedler.in/product/spring-plunger-m10-with-moving-ball-and-slot-strong-spring-tension-stainless-steel-sku-65499810b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M10 with ball and slot stainless steel strong spring tension SKU: 65499810](https://maedler.in/product/spring-plunger-m10-with-ball-and-slot-stainless-steel-strong-spring-tension-sku-65499810/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M8 with moving ball and slot strong spring tension stainless steel SKU: 65499808B](https://maedler.in/product/spring-plunger-m8-with-moving-ball-and-slot-strong-spring-tension-stainless-steel-sku-65499808b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M8 with ball and slot stainless steel strong spring tension SKU: 65499808](https://maedler.in/product/spring-plunger-m8-with-ball-and-slot-stainless-steel-strong-spring-tension-sku-65499808/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M6 with moving ball and slot strong spring tension stainless steel SKU: 65499806B](https://maedler.in/product/spring-plunger-m6-with-moving-ball-and-slot-strong-spring-tension-stainless-steel-sku-65499806b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M6 with ball and slot stainless steel strong spring tension SKU: 65499806](https://maedler.in/product/spring-plunger-m6-with-ball-and-slot-stainless-steel-strong-spring-tension-sku-65499806/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger M5 with moving ball and slot strong spring tension stainless steel SKU: 65499805B](https://maedler.in/product/spring-plunger-m5-with-moving-ball-and-slot-strong-spring-tension-stainless-steel-sku-65499805b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M5 with ball and slot stainless steel strong spring tension SKU: 65499805](https://maedler.in/product/spring-plunger-m5-with-ball-and-slot-stainless-steel-strong-spring-tension-sku-65499805/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension. Temperature range: -40ºC to +250ºC. - [Spring plunger d1=12mm type GN smooth with collar plunger and ball made from stainless steel SKU: 65499762](https://maedler.in/product/spring-plunger-d112mm-type-gn-smooth-with-collar-plunger-and-ball-made-from-stainless-steel-sku-65499762/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=10mm type GN smooth with collar plunger and ball made from stainless steel SKU: 65499760](https://maedler.in/product/spring-plunger-d110mm-type-gn-smooth-with-collar-plunger-and-ball-made-from-stainless-steel-sku-65499760/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=8mm type GN smooth with collar plunger and ball made from stainless steel SKU: 65499758](https://maedler.in/product/spring-plunger-d18mm-type-gn-smooth-with-collar-plunger-and-ball-made-from-stainless-steel-sku-65499758/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=6mm type GN smooth with collar plunger and ball made from stainless steel SKU: 65499756](https://maedler.in/product/spring-plunger-d16mm-type-gn-smooth-with-collar-plunger-and-ball-made-from-stainless-steel-sku-65499756/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=5mm type GN smooth with collar plunger and ball made from stainless steel SKU: 65499755](https://maedler.in/product/spring-plunger-d15mm-type-gn-smooth-with-collar-plunger-and-ball-made-from-stainless-steel-sku-65499755/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=4mm type GN smooth with collar plunger and ball made from stainless steel SKU: 65499754](https://maedler.in/product/spring-plunger-d14mm-type-gn-smooth-with-collar-plunger-and-ball-made-from-stainless-steel-sku-65499754/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=3mm type GN smooth with collar plunger and ball made from stainless steel SKU: 65499753](https://maedler.in/product/spring-plunger-d13mm-type-gn-smooth-with-collar-plunger-and-ball-made-from-stainless-steel-sku-65499753/): Material: Type GN: Body, ball and spring stainless steel. Type GP: Body: POM. Ball and spring: Stainless steel. Note: Spring plungers are used for fixation or as device to press something in or push it out. Temperature range: GN: -40°C to +250°C. GP: -30°C to +50°C. *statistical average - [Spring plunger d1=12mm smooth without collar with moving ball stainless steel SKU: 65499712B](https://maedler.in/product/spring-plunger-d112mm-smooth-without-collar-with-moving-ball-stainless-steel-sku-65499712b/): Material: Body and spring: Stainless steel. Ball: Stainless steel, hardened. Bearing: Made of plastic.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger d1=10mm smooth without collar with moving ball stainless steel SKU: 65499710B](https://maedler.in/product/spring-plunger-d110mm-smooth-without-collar-with-moving-ball-stainless-steel-sku-65499710b/): Material: Body and spring: Stainless steel. Ball: Stainless steel, hardened. Bearing: Made of plastic.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger d1=8mm smooth without collar with moving ball stainless steel SKU: 65499708B](https://maedler.in/product/spring-plunger-d18mm-smooth-without-collar-with-moving-ball-stainless-steel-sku-65499708b/): Material: Body and spring: Stainless steel. Ball: Stainless steel, hardened. Bearing: Made of plastic.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger d1=6mm smooth without collar with moving ball stainless steel SKU: 65499706B](https://maedler.in/product/spring-plunger-d16mm-smooth-without-collar-with-moving-ball-stainless-steel-sku-65499706b/): Material: Body and spring: Stainless steel. Ball: Stainless steel, hardened. Bearing: Made of plastic.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger d1=5mm smooth without collar with moving ball stainless steel SKU: 65499705B](https://maedler.in/product/spring-plunger-d15mm-smooth-without-collar-with-moving-ball-stainless-steel-sku-65499705b/): Material: Body and spring: Stainless steel. Ball: Stainless steel, hardened. Bearing: Made of plastic.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger d1=4mm smooth without collar with moving ball stainless steel SKU: 65499704B](https://maedler.in/product/spring-plunger-d14mm-smooth-without-collar-with-moving-ball-stainless-steel-sku-65499704b/): Material: Body and spring: Stainless steel. Ball: Stainless steel, hardened. Bearing: Made of plastic.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M12 type ASNV with ball and with internal hexagon strong spring tension stainless steel 1.4305 SKU: 65499672V](https://maedler.in/product/spring-plunger-m12-type-asnv-with-ball-and-with-internal-hexagon-strong-spring-tension-stainless-steel-1-4305-sku-65499672v/): Material: Type ASNV: Body: Stainless steel Ball: Stainless steel, hardened Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M12 type ASN with ball and with internal hexagon stainless steel 1.4305 SKU: 65499672](https://maedler.in/product/spring-plunger-m12-type-asn-with-ball-and-with-internal-hexagon-stainless-steel-1-4305-sku-65499672/): Material: Type ASN: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M10 type ASN with ball and with internal hexagon stainless steel 1.4305 SKU: 65499671](https://maedler.in/product/spring-plunger-m10-type-asn-with-ball-and-with-internal-hexagon-stainless-steel-1-4305-sku-65499671/): Material: Type ASN: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M10 type ASNV with ball and with internal hexagon strong spring tension stainless steel 1.4305 SKU: 65499670V](https://maedler.in/product/spring-plunger-m10-type-asnv-with-ball-and-with-internal-hexagon-strong-spring-tension-stainless-steel-1-4305-sku-65499670v/): Material: Type ASNV: Body: Stainless steel Ball: Stainless steel, hardened Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M20 with hexagon socket stainless steel 1.4305 SKU: 65499670](https://maedler.in/product/spring-plunger-m20-with-hexagon-socket-stainless-steel-1-4305-sku-65499670/): Material: Body: Stainless steel 1.4305 (AISI 303). Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M8 type ASNV with ball and with internal hexagon strong spring tension stainless steel 1.4305 SKU: 65499668V](https://maedler.in/product/spring-plunger-m8-type-asnv-with-ball-and-with-internal-hexagon-strong-spring-tension-stainless-steel-1-4305-sku-65499668v/): Material: Type ASNV: Body: Stainless steel Ball: Stainless steel, hardened Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M8 type ASN with ball and with internal hexagon stainless steel 1.4305 SKU: 65499668](https://maedler.in/product/spring-plunger-m8-type-asn-with-ball-and-with-internal-hexagon-stainless-steel-1-4305-sku-65499668/): Material: Type ASN: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M6 type ASN with ball and with internal hexagon stainless steel 1.4305 SKU: 65499667](https://maedler.in/product/spring-plunger-m6-type-asn-with-ball-and-with-internal-hexagon-stainless-steel-1-4305-sku-65499667/): Material: Type ASN: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M6 type ASNV with ball and with internal hexagon strong spring tension stainless steel 1.4305 SKU: 65499666V](https://maedler.in/product/spring-plunger-m6-type-asnv-with-ball-and-with-internal-hexagon-strong-spring-tension-stainless-steel-1-4305-sku-65499666v/): Material: Type ASNV: Body: Stainless steel Ball: Stainless steel, hardened Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M16 with hexagon socket stainless steel 1.4305 SKU: 65499666](https://maedler.in/product/spring-plunger-m16-with-hexagon-socket-stainless-steel-1-4305-sku-65499666/): Material: Body: Stainless steel 1.4305 (AISI 303). Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M5 type ASNV with ball and with internal hexagon strong spring tension stainless steel 1.4305 SKU: 65499665V](https://maedler.in/product/spring-plunger-m5-type-asnv-with-ball-and-with-internal-hexagon-strong-spring-tension-stainless-steel-1-4305-sku-65499665v/): Material: Type ASNV: Body: Stainless steel Ball: Stainless steel, hardened Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M5 type ASN with ball and with internal hexagon stainless steel 1.4305 SKU: 65499665](https://maedler.in/product/spring-plunger-m5-type-asn-with-ball-and-with-internal-hexagon-stainless-steel-1-4305-sku-65499665/): Material: Type ASN: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M4 type ASNV with ball and with internal hexagon strong spring tension stainless steel 1.4305 SKU: 65499664V](https://maedler.in/product/spring-plunger-m4-type-asnv-with-ball-and-with-internal-hexagon-strong-spring-tension-stainless-steel-1-4305-sku-65499664v/): Material: Type ASNV: Body: Stainless steel Ball: Stainless steel, hardened Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M4 type ASN with ball and with internal hexagon stainless steel 1.4305 SKU: 65499664](https://maedler.in/product/spring-plunger-m4-type-asn-with-ball-and-with-internal-hexagon-stainless-steel-1-4305-sku-65499664/): Material: Type ASN: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, normal spring tension.Used for fixation and to press something in or push it out. Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M12 with hexagon socket stainless steel 1.4305 SKU: 65499662](https://maedler.in/product/spring-plunger-m12-with-hexagon-socket-stainless-steel-1-4305-sku-65499662/): Material: Body: Stainless steel 1.4305 (AISI 303). Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M10 with hexagon socket stainless steel 1.4305 SKU: 65499660](https://maedler.in/product/spring-plunger-m10-with-hexagon-socket-stainless-steel-1-4305-sku-65499660/): Material: Body: Stainless steel 1.4305 (AISI 303). Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M8 with hexagon socket stainless steel 1.4305 SKU: 65499658](https://maedler.in/product/spring-plunger-m8-with-hexagon-socket-stainless-steel-1-4305-sku-65499658/): Material: Body: Stainless steel 1.4305 (AISI 303). Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M6 with hexagon socket stainless steel 1.4305 SKU: 65499656](https://maedler.in/product/spring-plunger-m6-with-hexagon-socket-stainless-steel-1-4305-sku-65499656/): Material: Body: Stainless steel 1.4305 (AISI 303). Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M5 with hexagon socket stainless steel 1.4305 SKU: 65499655](https://maedler.in/product/spring-plunger-m5-with-hexagon-socket-stainless-steel-1-4305-sku-65499655/): Material: Body: Stainless steel 1.4305 (AISI 303). Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M4 with hexagon socket stainless steel 1.4305 SKU: 65499654](https://maedler.in/product/spring-plunger-m4-with-hexagon-socket-stainless-steel-1-4305-sku-65499654/): Material: Body: Stainless steel 1.4305 (AISI 303). Spring: Stainless steel. Standard spring tension. Note: Used for fixation or as device to press something in or push it out. The spring plungers can be mounted and demounted using the internal hexagon or the slot. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M12 type AN with ball and head stainless steel 1.4305 SKU: 65499642](https://maedler.in/product/spring-plunger-m12-type-an-with-ball-and-head-stainless-steel-1-4305-sku-65499642/): Material Type AN: Body: Stainless steel. Ball: Stainless steel. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M10 type AN with ball and head stainless steel 1.4305 SKU: 65499640](https://maedler.in/product/spring-plunger-m10-type-an-with-ball-and-head-stainless-steel-1-4305-sku-65499640/): Material Type AN: Body: Stainless steel. Ball: Stainless steel. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M8 type AN with ball and head stainless steel 1.4305 SKU: 65499638](https://maedler.in/product/spring-plunger-m8-type-an-with-ball-and-head-stainless-steel-1-4305-sku-65499638/): Material Type AN: Body: Stainless steel. Ball: Stainless steel. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M6 type AN with ball and head stainless steel 1.4305 SKU: 65499636](https://maedler.in/product/spring-plunger-m6-type-an-with-ball-and-head-stainless-steel-1-4305-sku-65499636/): Material Type AN: Body: Stainless steel. Ball: Stainless steel. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M5 type AN with ball and head stainless steel 1.4305 SKU: 65499635](https://maedler.in/product/spring-plunger-m5-type-an-with-ball-and-head-stainless-steel-1-4305-sku-65499635/): Material Type AN: Body: Stainless steel. Ball: Stainless steel. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M4 type AN with ball and head stainless steel 1.4305 SKU: 65499634](https://maedler.in/product/spring-plunger-m4-type-an-with-ball-and-head-stainless-steel-1-4305-sku-65499634/): Material Type AN: Body: Stainless steel. Ball: Stainless steel. Spring: Stainless steel. Used for fixation and to press something in or push it out Temperature max. +250°C *statistical average - [Spring plunger M24 type R with ball and slot stainless steel SKU: 65499624](https://maedler.in/product/spring-plunger-m24-type-r-with-ball-and-slot-stainless-steel-sku-65499624/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M20 type R with ball and slot stainless steel SKU: 65499620](https://maedler.in/product/spring-plunger-m20-type-r-with-ball-and-slot-stainless-steel-sku-65499620/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M16 with moving ball and slot spring tension normal stainless steel SKU: 65499616B](https://maedler.in/product/spring-plunger-m16-with-moving-ball-and-slot-spring-tension-normal-stainless-steel-sku-65499616b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M16 type R with ball and slot stainless steel SKU: 65499616](https://maedler.in/product/spring-plunger-m16-type-r-with-ball-and-slot-stainless-steel-sku-65499616/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M12 with moving ball and slot spring tension normal stainless steel SKU: 65499612B](https://maedler.in/product/spring-plunger-m12-with-moving-ball-and-slot-spring-tension-normal-stainless-steel-sku-65499612b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M12 type R with ball and slot stainless steel SKU: 65499612](https://maedler.in/product/spring-plunger-m12-type-r-with-ball-and-slot-stainless-steel-sku-65499612/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M10 with moving ball and slot spring tension normal stainless steel SKU: 65499610B](https://maedler.in/product/spring-plunger-m10-with-moving-ball-and-slot-spring-tension-normal-stainless-steel-sku-65499610b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M10 type R with ball and slot stainless steel SKU: 65499610](https://maedler.in/product/spring-plunger-m10-type-r-with-ball-and-slot-stainless-steel-sku-65499610/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M8 with moving ball and slot spring tension normal stainless steel SKU: 65499608B](https://maedler.in/product/spring-plunger-m8-with-moving-ball-and-slot-spring-tension-normal-stainless-steel-sku-65499608b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M 8 type R with ball and slot stainless steel SKU: 65499608](https://maedler.in/product/spring-plunger-m-8-type-r-with-ball-and-slot-stainless-steel-sku-65499608/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M6 with moving ball and slot spring tension normal stainless steel SKU: 65499606B](https://maedler.in/product/spring-plunger-m6-with-moving-ball-and-slot-spring-tension-normal-stainless-steel-sku-65499606b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M 6 type R with ball and slot stainless steel SKU: 65499606](https://maedler.in/product/spring-plunger-m-6-type-r-with-ball-and-slot-stainless-steel-sku-65499606/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M5 with moving ball and slot spring tension normal stainless steel SKU: 65499605B](https://maedler.in/product/spring-plunger-m5-with-moving-ball-and-slot-spring-tension-normal-stainless-steel-sku-65499605b/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.Spring plungers are used for fixation or as device to press something in or push it out. Due to the plastic bearing, the ball is electrically insulated and the rolling in it minimizes the wear on the counterpart. - [Spring plunger M5 type R with ball and slot stainless steel SKU: 65499605](https://maedler.in/product/spring-plunger-m5-type-r-with-ball-and-slot-stainless-steel-sku-65499605/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M4 type R with ball and slot stainless steel SKU: 65499604](https://maedler.in/product/spring-plunger-m4-type-r-with-ball-and-slot-stainless-steel-sku-65499604/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M3 type R with ball and slot stainless steel SKU: 65499603](https://maedler.in/product/spring-plunger-m3-type-r-with-ball-and-slot-stainless-steel-sku-65499603/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Spring plunger M2 type R with ball and slot stainless steel SKU: 65499602](https://maedler.in/product/spring-plunger-m2-type-r-with-ball-and-slot-stainless-steel-sku-65499602/): Material: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, standard spring tension. Note: These Spring Plungers are, e.g., used for fixation or as device to press something in or push it out. Temperature range: -40° to +250°C. *statistical average - [Knurled thumb screw DIN 464 M8 x 30mm long stainless steel 1.4305 SKU: 65499227](https://maedler.in/product/knurled-thumb-screw-din-464-m8-x-30mm-long-stainless-steel-1-4305-sku-65499227/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M8 x 20mm long stainless steel 1.4305 SKU: 65499225](https://maedler.in/product/knurled-thumb-screw-din-464-m8-x-20mm-long-stainless-steel-1-4305-sku-65499225/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M8 x 16mm long stainless steel 1.4305 SKU: 65499224](https://maedler.in/product/knurled-thumb-screw-din-464-m8-x-16mm-long-stainless-steel-1-4305-sku-65499224/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M6 x 25mm long stainless steel 1.4305 SKU: 65499222](https://maedler.in/product/knurled-thumb-screw-din-464-m6-x-25mm-long-stainless-steel-1-4305-sku-65499222/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M6 x 20mm long stainless steel 1.4305 SKU: 65499221](https://maedler.in/product/knurled-thumb-screw-din-464-m6-x-20mm-long-stainless-steel-1-4305-sku-65499221/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M6 x 16mm long stainless steel 1.4305 SKU: 65499220](https://maedler.in/product/knurled-thumb-screw-din-464-m6-x-16mm-long-stainless-steel-1-4305-sku-65499220/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M5 x 20mm long stainless steel 1.4305 SKU: 65499216](https://maedler.in/product/knurled-thumb-screw-din-464-m5-x-20mm-long-stainless-steel-1-4305-sku-65499216/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M5 x 16mm long stainless steel 1.4305 SKU: 65499214](https://maedler.in/product/knurled-thumb-screw-din-464-m5-x-16mm-long-stainless-steel-1-4305-sku-65499214/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M5 x 10mm long stainless steel 1.4305 SKU: 65499212](https://maedler.in/product/knurled-thumb-screw-din-464-m5-x-10mm-long-stainless-steel-1-4305-sku-65499212/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M4 x 16mm long stainless steel 1.4305 SKU: 65499208](https://maedler.in/product/knurled-thumb-screw-din-464-m4-x-16mm-long-stainless-steel-1-4305-sku-65499208/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M4 x 12mm long stainless steel 1.4305 SKU: 65499207](https://maedler.in/product/knurled-thumb-screw-din-464-m4-x-12mm-long-stainless-steel-1-4305-sku-65499207/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M4 x 10mm long stainless steel 1.4305 SKU: 65499206](https://maedler.in/product/knurled-thumb-screw-din-464-m4-x-10mm-long-stainless-steel-1-4305-sku-65499206/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Knurled thumb screw DIN 464 M4 x 8mm long stainless steel 1.4305 SKU: 65499205](https://maedler.in/product/knurled-thumb-screw-din-464-m4-x-8mm-long-stainless-steel-1-4305-sku-65499205/): Material: Stainless steel 1.4305 (AISI 303), 5.8 tensile strength.Visible face precision turned.Contrary to the standards sheet, all knurled screws are producedfrom one piece and threaded over their full length. - [Spring-action side thrust pin 2214 12 x 35 version E single-sided strong spring pressure steel black oxide finished SKU: 65495200](https://maedler.in/product/spring-action-side-thrust-pin-2214-12-x-35-version-e-single-sided-strong-spring-pressure-steel-black-oxide-finished-sku-65495200/): Material: Version A: Free cutting steel, black oxide finish. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range -30°C to +50°C. Version B: Free cutting steel, burnished. Ball: Steel, hardened. Spring: Plastic. Temperature range -40°C to +80°C. Note: The side thrust pin is pressed into the bore by at least as far as the measure l3. It serves to position, hold or clamp small workpieces inside fixtures. If the workpiece is machined, additional clamping devices might be required for holding it safely in place. If fixtures are stored please make sure that the plastic spring is not loaded. *statistical average - [Spring-action side thrust pin 2214 10 x 30 version E single-sided strong spring pressure steel black oxide finished SKU: 65495000](https://maedler.in/product/spring-action-side-thrust-pin-2214-10-x-30-version-e-single-sided-strong-spring-pressure-steel-black-oxide-finished-sku-65495000/): Material: Version A: Free cutting steel, black oxide finish. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range -30°C to +50°C. Version B: Free cutting steel, burnished. Ball: Steel, hardened. Spring: Plastic. Temperature range -40°C to +80°C. Note: The side thrust pin is pressed into the bore by at least as far as the measure l3. It serves to position, hold or clamp small workpieces inside fixtures. If the workpiece is machined, additional clamping devices might be required for holding it safely in place. If fixtures are stored please make sure that the plastic spring is not loaded. *statistical average - [Spring-action side thrust pin 2214 14 x 40 version A single-sided normal spring pressure steel black oxide finished SKU: 65493400](https://maedler.in/product/spring-action-side-thrust-pin-2214-14-x-40-version-a-single-sided-normal-spring-pressure-steel-black-oxide-finished-sku-65493400/): Material: Version A: Free cutting steel, black oxide finish. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range -30°C to +50°C. Version B: Free cutting steel, burnished. Ball: Steel, hardened. Spring: Plastic. Temperature range -40°C to +80°C. Note: The side thrust pin is pressed into the bore by at least as far as the measure l3. It serves to position, hold or clamp small workpieces inside fixtures. If the workpiece is machined, additional clamping devices might be required for holding it safely in place. If fixtures are stored please make sure that the plastic spring is not loaded. *statistical average - [Spring-action side thrust pin 2214 12 x 35 version A single-sided normal spring pressure steel black oxide finished SKU: 65493200](https://maedler.in/product/spring-action-side-thrust-pin-2214-12-x-35-version-a-single-sided-normal-spring-pressure-steel-black-oxide-finished-sku-65493200/): Material: Version A: Free cutting steel, black oxide finish. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range -30°C to +50°C. Version B: Free cutting steel, burnished. Ball: Steel, hardened. Spring: Plastic. Temperature range -40°C to +80°C. Note: The side thrust pin is pressed into the bore by at least as far as the measure l3. It serves to position, hold or clamp small workpieces inside fixtures. If the workpiece is machined, additional clamping devices might be required for holding it safely in place. If fixtures are stored please make sure that the plastic spring is not loaded. *statistical average - [Spring-action side thrust pin 2214 10 x 30 version A single-sided normal spring pressure steel black oxide finished SKU: 65493000](https://maedler.in/product/spring-action-side-thrust-pin-2214-10-x-30-version-a-single-sided-normal-spring-pressure-steel-black-oxide-finished-sku-65493000/): Material: Version A: Free cutting steel, black oxide finish. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range -30°C to +50°C. Version B: Free cutting steel, burnished. Ball: Steel, hardened. Spring: Plastic. Temperature range -40°C to +80°C. Note: The side thrust pin is pressed into the bore by at least as far as the measure l3. It serves to position, hold or clamp small workpieces inside fixtures. If the workpiece is machined, additional clamping devices might be required for holding it safely in place. If fixtures are stored please make sure that the plastic spring is not loaded. *statistical average - [Spring-action side thrust pin 2214 8 x 25 version A single-sided normal spring pressure steel black oxide finished SKU: 65492800](https://maedler.in/product/spring-action-side-thrust-pin-2214-8-x-25-version-a-single-sided-normal-spring-pressure-steel-black-oxide-finished-sku-65492800/): Material: Version A: Free cutting steel, black oxide finish. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range -30°C to +50°C. Version B: Free cutting steel, burnished. Ball: Steel, hardened. Spring: Plastic. Temperature range -40°C to +80°C. Note: The side thrust pin is pressed into the bore by at least as far as the measure l3. It serves to position, hold or clamp small workpieces inside fixtures. If the workpiece is machined, additional clamping devices might be required for holding it safely in place. If fixtures are stored please make sure that the plastic spring is not loaded. *statistical average - [Spring plunger M24 with ball and internal hexagon strong spring tension steel black oxide finished SKU: 65492400V](https://maedler.in/product/spring-plunger-m24-with-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65492400v/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M24 with ball and internal hexagon steel black oxide finished SKU: 65492400](https://maedler.in/product/spring-plunger-m24-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65492400/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M20 with ball and internal hexagon strong spring tension steel black oxide finished SKU: 65492000V](https://maedler.in/product/spring-plunger-m20-with-ball-and-internal-hexagon-strong-spring-tension-steel-black-oxide-finished-sku-65492000v/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M20 with ball and internal hexagon steel black oxide finished SKU: 65492000](https://maedler.in/product/spring-plunger-m20-with-ball-and-internal-hexagon-steel-black-oxide-finished-sku-65492000/): Material type black oxided: Body: Steel, black oxide finish. Ball: Steel, hardened. Spring: Stainless steel, standard spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 50mm SKU: 80525050](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-50mm-sku-80525050/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 25mm SKU: 80525025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-25mm-sku-80525025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 10mm SKU: 80525010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-10mm-sku-80525010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 200mm SKU: 80520200](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-200mm-sku-80520200/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 160mm SKU: 80520160](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-160mm-sku-80520160/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 125mm SKU: 80520125](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-125mm-sku-80520125/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 100mm SKU: 80520100](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-100mm-sku-80520100/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 80mm SKU: 80520080](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-80mm-sku-80520080/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 50mm SKU: 80520050](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-50mm-sku-80520050/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 25mm SKU: 80520025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-25mm-sku-80520025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 20mm, travel 10mm SKU: 80520010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-20mm-travel-10mm-sku-80520010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 16mm, travel 50mm SKU: 80516050](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-16mm-travel-50mm-sku-80516050/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 16mm, travel 25mm SKU: 80516025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-16mm-travel-25mm-sku-80516025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 16mm, travel 10mm SKU: 80516010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-16mm-travel-10mm-sku-80516010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 12mm, travel 25mm SKU: 80512025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-12mm-travel-25mm-sku-80512025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 12mm, travel 10mm SKU: 80512010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-12mm-travel-10mm-sku-80512010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 10mm, travel 25mm SKU: 80510025](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-10mm-travel-25mm-sku-80510025/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 10mm, travel 10mm SKU: 80510010](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-10mm-travel-10mm-sku-80510010/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 40mm, travel 50mm SKU: 80340050](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-40mm-travel-50mm-sku-80340050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 40mm, travel 25mm SKU: 80340025](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-40mm-travel-25mm-sku-80340025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 40mm, travel 10mm SKU: 80340010](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-40mm-travel-10mm-sku-80340010/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 32mm, travel 50mm SKU: 80332050](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-32mm-travel-50mm-sku-80332050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 32mm, travel 25mm SKU: 80332025](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-32mm-travel-25mm-sku-80332025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 32mm, travel 10mm SKU: 80332010](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-32mm-travel-10mm-sku-80332010/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 25mm, travel 50mm SKU: 80325050](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-25mm-travel-50mm-sku-80325050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 25mm, travel 25mm SKU: 80325025](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-25mm-travel-25mm-sku-80325025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 25mm, travel 10mm SKU: 80325010](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-25mm-travel-10mm-sku-80325010/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 20mm, travel 50mm SKU: 80320050](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-20mm-travel-50mm-sku-80320050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 20mm, travel 25mm SKU: 80320025](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-20mm-travel-25mm-sku-80320025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting compact cylinder with magnetic piston, cylinder diameter 20mm, travel 10mm SKU: 80320010](https://maedler.in/product/double-acting-compact-cylinder-with-magnetic-piston-cylinder-diameter-20mm-travel-10mm-sku-80320010/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (Ø 20 and 25 mm austenitic, Ø 32 and 40 mm ferritic). Piston rod seal: Polyurethane. Piston seal: NBR. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 21287. Mode of operation: double-acting, magnetic piston, piston rod with internal thread, buffer cushioning. Operating pressure: 1 to 10 bar. Operating temperature: -5°C* to +80°C max. *With temperatures below +2°C please consider the air quality. On request also available with external thread. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 250mm pressure max. 12 bar SKU: 80180250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-250mm-pressure-max-12-bar-sku-80180250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 200mm pressure max. 12 bar SKU: 80180200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-200mm-pressure-max-12-bar-sku-80180200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 160mm pressure max. 12 bar SKU: 80180160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-160mm-pressure-max-12-bar-sku-80180160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 125mm pressure max. 12 bar SKU: 80180125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-125mm-pressure-max-12-bar-sku-80180125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 100mm pressure max. 12 bar SKU: 80180100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-100mm-pressure-max-12-bar-sku-80180100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 80mm pressure max. 12 bar SKU: 80180080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-80mm-pressure-max-12-bar-sku-80180080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 50mm pressure max. 12 bar SKU: 80180050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-50mm-pressure-max-12-bar-sku-80180050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 80mm stroke 25mm pressure max. 12 bar SKU: 80180025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-80mm-stroke-25mm-pressure-max-12-bar-sku-80180025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 250mm pressure max. 12 bar SKU: 80163250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-250mm-pressure-max-12-bar-sku-80163250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 200mm pressure max. 12 bar SKU: 80163200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-200mm-pressure-max-12-bar-sku-80163200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 160mm pressure max. 12 bar SKU: 80163160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-160mm-pressure-max-12-bar-sku-80163160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 125mm pressure max. 12 bar SKU: 80163125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-125mm-pressure-max-12-bar-sku-80163125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 100mm pressure max. 12 bar SKU: 80163100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-100mm-pressure-max-12-bar-sku-80163100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 80mm pressure max. 12 bar SKU: 80163080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-80mm-pressure-max-12-bar-sku-80163080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 50mm pressure max. 12 bar SKU: 80163050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-50mm-pressure-max-12-bar-sku-80163050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 63mm stroke 25mm pressure max. 12 bar SKU: 80163025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-63mm-stroke-25mm-pressure-max-12-bar-sku-80163025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 250mm pressure max. 12 bar SKU: 80150250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-250mm-pressure-max-12-bar-sku-80150250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 200mm pressure max. 12 bar SKU: 80150200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-200mm-pressure-max-12-bar-sku-80150200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 160mm pressure max. 12 bar SKU: 80150160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-160mm-pressure-max-12-bar-sku-80150160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 125mm pressure max. 12 bar SKU: 80150125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-125mm-pressure-max-12-bar-sku-80150125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 100mm pressure max. 12 bar SKU: 80150100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-100mm-pressure-max-12-bar-sku-80150100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 80mm pressure max. 12 bar SKU: 80150080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-80mm-pressure-max-12-bar-sku-80150080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 50mm pressure max. 12 bar SKU: 80150050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-50mm-pressure-max-12-bar-sku-80150050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 50mm stroke 25mm pressure max. 12 bar SKU: 80150025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-50mm-stroke-25mm-pressure-max-12-bar-sku-80150025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 250mm pressure max. 12 bar SKU: 80140250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-250mm-pressure-max-12-bar-sku-80140250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 200mm pressure max. 12 bar SKU: 80140200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-200mm-pressure-max-12-bar-sku-80140200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 160mm pressure max. 12 bar SKU: 80140160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-160mm-pressure-max-12-bar-sku-80140160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 125mm pressure max. 12 bar SKU: 80140125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-125mm-pressure-max-12-bar-sku-80140125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 100mm pressure max. 12 bar SKU: 80140100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-100mm-pressure-max-12-bar-sku-80140100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 80mm pressure max. 12 bar SKU: 80140080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-80mm-pressure-max-12-bar-sku-80140080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 50mm pressure max. 12 bar SKU: 80140050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-50mm-pressure-max-12-bar-sku-80140050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 40mm stroke 25mm pressure max. 12 bar SKU: 80140025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-40mm-stroke-25mm-pressure-max-12-bar-sku-80140025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 250mm pressure max. 12 bar SKU: 80132250](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-250mm-pressure-max-12-bar-sku-80132250/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 200mm pressure max. 12 bar SKU: 80132200](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-200mm-pressure-max-12-bar-sku-80132200/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 160mm pressure max. 12 bar SKU: 80132160](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-160mm-pressure-max-12-bar-sku-80132160/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 125mm pressure max. 12 bar SKU: 80132125](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-125mm-pressure-max-12-bar-sku-80132125/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 100mm pressure max. 12 bar SKU: 80132100](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-100mm-pressure-max-12-bar-sku-80132100/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 80mm pressure max. 12 bar SKU: 80132080](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-80mm-pressure-max-12-bar-sku-80132080/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 50mm pressure max. 12 bar SKU: 80132050](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-50mm-pressure-max-12-bar-sku-80132050/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Double-acting standard cylinder ISO 15552 cylinder diameter 32mm stroke 25mm pressure max. 12 bar SKU: 80132025](https://maedler.in/product/double-acting-standard-cylinder-iso-15552-cylinder-diameter-32mm-stroke-25mm-pressure-max-12-bar-sku-80132025/): Materials: Profile barrel: Anodised aluminium. End covers: Aluminium die-cast. Piston rod: Stainless steel (ferritic), Piston and piston rod seals: Polyurethane. O-ring seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 15552. Mode of operation: Double-acting with magnetic piston and adaptive end-of-stroke cushioning system ACS. Operating pressure:1 to 12 bar. Operating temperature: -20°C to +80°C max. Below +2°C please consider the air quality. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599340](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599340/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599330](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599330/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599324](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599324/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599320](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599320/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599316](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599316/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 3000mm long double-thread right material 1.4305 rolled SKU: 64599312](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-3000mm-long-double-thread-right-material-1-4305-rolled-sku-64599312/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599240](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599240/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599230](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599230/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599224](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599224/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599220](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599220/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599216](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599216/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 2000mm long double-thread right material 1.4305 rolled SKU: 64599212](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-2000mm-long-double-thread-right-material-1-4305-rolled-sku-64599212/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599140](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599140/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599130](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599130/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599124](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599124/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599120](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599120/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599116](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599116/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 1500mm long double-thread right material 1.4305 rolled SKU: 64599112](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-1500mm-long-double-thread-right-material-1-4305-rolled-sku-64599112/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 1000mm long double-thread right material 1.4305 rolled SKU: 64599040](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-1000mm-long-double-thread-right-material-1-4305-rolled-sku-64599040/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x1000 mm long double-thread right material 1.4305 rolled SKU: 64599030](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x1000-mm-long-double-thread-right-material-1-4305-rolled-sku-64599030/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 1000mm long double-thread right material 1.4305 rolled SKU: 64599024](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-1000mm-long-double-thread-right-material-1-4305-rolled-sku-64599024/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 1000mm long double-thread right Materila 1.4305 rolled SKU: 64599020](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-1000mm-long-double-thread-right-materila-1-4305-rolled-sku-64599020/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 1000mm long double-thread right material 1.4305 rolled SKU: 64599016](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-1000mm-long-double-thread-right-material-1-4305-rolled-sku-64599016/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 1000mm long double-thread right material 1.4305 rolled SKU: 64599012](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-1000mm-long-double-thread-right-material-1-4305-rolled-sku-64599012/): Material: C15, rolled. Tolerance zone 7e.Material: 1.4305. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.40 x 14P7 x 3000mm long double-thread right material C15 rolled SKU: 64534000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-40-x-14p7-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64534000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.30 x 12P6 x 3000mm long double-thread right material C15 rolled SKU: 64533000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-30-x-12p6-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64533000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.24 x 10P5 x 3000mm long double-thread right material C15 rolled SKU: 64532400](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-24-x-10p5-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64532400/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.20 x 8P4 x 3000mm long double-thread right material C15 rolled SKU: 64532000](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-20-x-8p4-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64532000/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.16 x 8P4 x 3000mm long double-thread right material C15 rolled SKU: 64531600](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-16-x-8p4-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64531600/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Trapezoidal-threaded spindle DIN 103 Tr.12 x 6P3 x 3000mm long double-thread right material C15 rolled SKU: 64531200](https://maedler.in/product/trapezoidal-threaded-spindle-din-103-tr-12-x-6p3-x-3000mm-long-double-thread-right-material-c15-rolled-sku-64531200/): Material: C15. Tolerance zone 7e. Length sawed (length may be longer than nominal length), edges not broken. - [Nut DIN 508 rhombus for T-slot 20mm DIN 650 thread M18 quality 10 SKU: 65511820R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-20mm-din-650-thread-m18-quality-10-sku-65511820r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 20mm DIN 650 thread M18 quality 10 SKU: 65511820L](https://maedler.in/product/nut-din-508-long-for-t-slot-20mm-din-650-thread-m18-quality-10-sku-65511820l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 20mm DIN 650 thread M18 quality 10 SKU: 65511820](https://maedler.in/product/nut-din-508-for-t-slot-20mm-din-650-thread-m18-quality-10-sku-65511820/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 28mm DIN 650 thread M16 quality 10 SKU: 65511628R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-28mm-din-650-thread-m16-quality-10-sku-65511628r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 rhombus for T-slot 22mm DIN 650 thread M16 quality 10 SKU: 65511622R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-22mm-din-650-thread-m16-quality-10-sku-65511622r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 for T-slot 20mm DIN 650 thread M16 quality 10 zinc plated SKU: 65511620VZ](https://maedler.in/product/nut-din-508-for-t-slot-20mm-din-650-thread-m16-quality-10-zinc-plated-sku-65511620vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 20mm DIN 650 thread M16 quality 10 SKU: 65511620R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-20mm-din-650-thread-m16-quality-10-sku-65511620r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 for T-slot 20mm DIN 650 thread M16 quality 10 SKU: 65511620](https://maedler.in/product/nut-din-508-for-t-slot-20mm-din-650-thread-m16-quality-10-sku-65511620/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 18mm DIN 650 thread M16 quality 10 zinc plated SKU: 65511618VZ](https://maedler.in/product/nut-din-508-for-t-slot-18mm-din-650-thread-m16-quality-10-zinc-plated-sku-65511618vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 18mm DIN 650 thread M16 quality 10 SKU: 65511618R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-18mm-din-650-thread-m16-quality-10-sku-65511618r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 18mm DIN 650 thread M16 1.4571 SKU: 65511618LA4](https://maedler.in/product/nut-din-508-long-for-t-slot-18mm-din-650-thread-m16-1-4571-sku-65511618la4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 long for T-slot 18mm DIN 650 thread M16 quality 10 SKU: 65511618L](https://maedler.in/product/nut-din-508-long-for-t-slot-18mm-din-650-thread-m16-quality-10-sku-65511618l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 with ball for T-slot 18mm DIN 650 thread M16 quality 10 SKU: 65511618K](https://maedler.in/product/nut-din-508-with-ball-for-t-slot-18mm-din-650-thread-m16-quality-10-sku-65511618k/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with spring-loaded ball against unintended moving. The loose nut will be held, even in vertical position.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 18mm DIN 650 thread M16 material 1.4571 SKU: 65511618A4](https://maedler.in/product/nut-din-508-for-t-slot-18mm-din-650-thread-m16-material-1-4571-sku-65511618a4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 18mm DIN 650 thread M16 quality 10 SKU: 65511618](https://maedler.in/product/nut-din-508-for-t-slot-18mm-din-650-thread-m16-quality-10-sku-65511618/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 18mm DIN 650 thread M14 quality 10 zinc plated SKU: 65511418VZ](https://maedler.in/product/nut-din-508-for-t-slot-18mm-din-650-thread-m14-quality-10-zinc-plated-sku-65511418vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 18mm DIN 650 thread M14 quality 10 SKU: 65511418](https://maedler.in/product/nut-din-508-for-t-slot-18mm-din-650-thread-m14-quality-10-sku-65511418/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 16mm DIN 650 thread M14 quality 10 zinc plated SKU: 65511416VZ](https://maedler.in/product/nut-din-508-for-t-slot-16mm-din-650-thread-m14-quality-10-zinc-plated-sku-65511416vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 16mm DIN 650 thread M14 quality 10 SKU: 65511416R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-16mm-din-650-thread-m14-quality-10-sku-65511416r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 16mm DIN 650 thread M14 quality 10 SKU: 65511416L](https://maedler.in/product/nut-din-508-long-for-t-slot-16mm-din-650-thread-m14-quality-10-sku-65511416l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 16mm DIN 650 thread M14 quality 10 SKU: 65511416](https://maedler.in/product/nut-din-508-for-t-slot-16mm-din-650-thread-m14-quality-10-sku-65511416/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 18mm DIN 650 thread M12 quality 10 zinc plated SKU: 65511218VZ](https://maedler.in/product/nut-din-508-for-t-slot-18mm-din-650-thread-m12-quality-10-zinc-plated-sku-65511218vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 18mm DIN 650 thread M12 quality 10 SKU: 65511218](https://maedler.in/product/nut-din-508-for-t-slot-18mm-din-650-thread-m12-quality-10-sku-65511218/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 16mm DIN 650 thread M12 quality 10 zinc plated SKU: 65511216VZ](https://maedler.in/product/nut-din-508-for-t-slot-16mm-din-650-thread-m12-quality-10-zinc-plated-sku-65511216vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 16mm DIN 650 thread M12 quality 10 SKU: 65511216](https://maedler.in/product/nut-din-508-for-t-slot-16mm-din-650-thread-m12-quality-10-sku-65511216/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 14mm DIN 650 thread M12 quality 10 zinc plated SKU: 65511214VZ](https://maedler.in/product/nut-din-508-for-t-slot-14mm-din-650-thread-m12-quality-10-zinc-plated-sku-65511214vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 14mm DIN 650 thread M12 quality 10 SKU: 65511214R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-14mm-din-650-thread-m12-quality-10-sku-65511214r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 14mm DIN 650 thread M12 1.4571 SKU: 65511214LA4](https://maedler.in/product/nut-din-508-long-for-t-slot-14mm-din-650-thread-m12-1-4571-sku-65511214la4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 long for T-slot 14mm DIN 650 thread M12 quality 10 SKU: 65511214L](https://maedler.in/product/nut-din-508-long-for-t-slot-14mm-din-650-thread-m12-quality-10-sku-65511214l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 with ball for T-slot 14mm DIN 650 thread M12 quality 10 SKU: 65511214K](https://maedler.in/product/nut-din-508-with-ball-for-t-slot-14mm-din-650-thread-m12-quality-10-sku-65511214k/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with spring-loaded ball against unintended moving. The loose nut will be held, even in vertical position.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 14mm DIN 650 thread M12 material 1.4571 SKU: 65511214A4](https://maedler.in/product/nut-din-508-for-t-slot-14mm-din-650-thread-m12-material-1-4571-sku-65511214a4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 14mm DIN 650 thread M12 quality 10 SKU: 65511214](https://maedler.in/product/nut-din-508-for-t-slot-14mm-din-650-thread-m12-quality-10-sku-65511214/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 18mm DIN 650 thread M10 quality 10 SKU: 65511018R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-18mm-din-650-thread-m10-quality-10-sku-65511018r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 for T-slot 14mm DIN 650 thread M10 quality 10 zinc plated SKU: 65511014VZ](https://maedler.in/product/nut-din-508-for-t-slot-14mm-din-650-thread-m10-quality-10-zinc-plated-sku-65511014vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 14mm DIN 650 thread M10 quality 10 SKU: 65511014R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-14mm-din-650-thread-m10-quality-10-sku-65511014r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 for T-slot 14mm DIN 650 thread M10 quality 10 SKU: 65511014](https://maedler.in/product/nut-din-508-for-t-slot-14mm-din-650-thread-m10-quality-10-sku-65511014/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 12mm DIN 650 thread M10 quality 10 zinc plated SKU: 65511012VZ](https://maedler.in/product/nut-din-508-for-t-slot-12mm-din-650-thread-m10-quality-10-zinc-plated-sku-65511012vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 12mm DIN 650 thread M10 quality 10 SKU: 65511012R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-12mm-din-650-thread-m10-quality-10-sku-65511012r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 12mm DIN 650 thread M10 1.4571 SKU: 65511012LA4](https://maedler.in/product/nut-din-508-long-for-t-slot-12mm-din-650-thread-m10-1-4571-sku-65511012la4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 long for T-slot 12mm DIN 650 thread M10 quality 10 SKU: 65511012L](https://maedler.in/product/nut-din-508-long-for-t-slot-12mm-din-650-thread-m10-quality-10-sku-65511012l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 with ball for T-slot 12mm DIN 650 thread M10 quality 10 SKU: 65511012K](https://maedler.in/product/nut-din-508-with-ball-for-t-slot-12mm-din-650-thread-m10-quality-10-sku-65511012k/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with spring-loaded ball against unintended moving. The loose nut will be held, even in vertical position.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 12mm DIN 650 thread M10 material 1.4571 SKU: 65511012A4](https://maedler.in/product/nut-din-508-for-t-slot-12mm-din-650-thread-m10-material-1-4571-sku-65511012a4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 12mm DIN 650 thread M10 quality 10 SKU: 65511012](https://maedler.in/product/nut-din-508-for-t-slot-12mm-din-650-thread-m10-quality-10-sku-65511012/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 14mm DIN 650 thread M8 quality 10 zinc plated SKU: 65510814VZ](https://maedler.in/product/nut-din-508-for-t-slot-14mm-din-650-thread-m8-quality-10-zinc-plated-sku-65510814vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 14mm DIN 650 thread M8 quality 10 SKU: 65510814](https://maedler.in/product/nut-din-508-for-t-slot-14mm-din-650-thread-m8-quality-10-sku-65510814/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 12mm DIN 650 thread M8 quality 10 zinc plated SKU: 65510812VZ](https://maedler.in/product/nut-din-508-for-t-slot-12mm-din-650-thread-m8-quality-10-zinc-plated-sku-65510812vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 12mm DIN 650 thread M8 quality 10 SKU: 65510812](https://maedler.in/product/nut-din-508-for-t-slot-12mm-din-650-thread-m8-quality-10-sku-65510812/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 10mm DIN 650 thread M8 quality 10 zinc plated SKU: 65510810VZ](https://maedler.in/product/nut-din-508-for-t-slot-10mm-din-650-thread-m8-quality-10-zinc-plated-sku-65510810vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 10mm DIN 650 thread M8 quality 10 SKU: 65510810R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-10mm-din-650-thread-m8-quality-10-sku-65510810r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 10mm DIN 650 thread M8 1.4571 SKU: 65510810LA4](https://maedler.in/product/nut-din-508-long-for-t-slot-10mm-din-650-thread-m8-1-4571-sku-65510810la4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 long for T-slot 10mm DIN 650 thread M8 quality 10 SKU: 65510810L](https://maedler.in/product/nut-din-508-long-for-t-slot-10mm-din-650-thread-m8-quality-10-sku-65510810l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 with ball for T-slot 10mm DIN 650 thread M8 quality 10 SKU: 65510810K](https://maedler.in/product/nut-din-508-with-ball-for-t-slot-10mm-din-650-thread-m8-quality-10-sku-65510810k/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with spring-loaded ball against unintended moving. The loose nut will be held, even in vertical position.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 10mm DIN 650 thread M8 material 1.4571 SKU: 65510810A4](https://maedler.in/product/nut-din-508-for-t-slot-10mm-din-650-thread-m8-material-1-4571-sku-65510810a4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 10mm DIN 650 thread M8 quality 10 SKU: 65510810](https://maedler.in/product/nut-din-508-for-t-slot-10mm-din-650-thread-m8-quality-10-sku-65510810/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 12mm DIN 650 thread M6 quality 10 zinc plated SKU: 65510612VZ](https://maedler.in/product/nut-din-508-for-t-slot-12mm-din-650-thread-m6-quality-10-zinc-plated-sku-65510612vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 12mm DIN 650 thread M6 quality 10 SKU: 65510612](https://maedler.in/product/nut-din-508-for-t-slot-12mm-din-650-thread-m6-quality-10-sku-65510612/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 10mm DIN 650 thread M6 quality 10 zinc plated SKU: 65510610VZ](https://maedler.in/product/nut-din-508-for-t-slot-10mm-din-650-thread-m6-quality-10-zinc-plated-sku-65510610vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 10mm DIN 650 thread M6 quality 10 SKU: 65510610](https://maedler.in/product/nut-din-508-for-t-slot-10mm-din-650-thread-m6-quality-10-sku-65510610/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 8mm DIN 650 thread M6 quality 10 zinc plated SKU: 65510608VZ](https://maedler.in/product/nut-din-508-for-t-slot-8mm-din-650-thread-m6-quality-10-zinc-plated-sku-65510608vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 8mm DIN 650 thread M6 quality 10 SKU: 65510608R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-8mm-din-650-thread-m6-quality-10-sku-65510608r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 8mm DIN 650 thread M6 1.4571 SKU: 65510608LA4](https://maedler.in/product/nut-din-508-long-for-t-slot-8mm-din-650-thread-m6-1-4571-sku-65510608la4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 long for T-slot 8mm DIN 650 thread M6 quality 10 SKU: 65510608L](https://maedler.in/product/nut-din-508-long-for-t-slot-8mm-din-650-thread-m6-quality-10-sku-65510608l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 8mm DIN 650 thread M6 material 1.4571 SKU: 65510608A4](https://maedler.in/product/nut-din-508-for-t-slot-8mm-din-650-thread-m6-material-1-4571-sku-65510608a4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 8mm DIN 650 thread M6 quality 10 SKU: 65510608](https://maedler.in/product/nut-din-508-for-t-slot-8mm-din-650-thread-m6-quality-10-sku-65510608/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 10mm DIN 650 thread M5 quality 10 zinc plated SKU: 65510510VZ](https://maedler.in/product/nut-din-508-for-t-slot-10mm-din-650-thread-m5-quality-10-zinc-plated-sku-65510510vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 10mm DIN 650 thread M5 quality 10 SKU: 65510510](https://maedler.in/product/nut-din-508-for-t-slot-10mm-din-650-thread-m5-quality-10-sku-65510510/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 8mm DIN 650 thread M5 quality 10 zinc plated SKU: 65510508VZ](https://maedler.in/product/nut-din-508-for-t-slot-8mm-din-650-thread-m5-quality-10-zinc-plated-sku-65510508vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 8mm DIN 650 thread M5 quality 10 SKU: 65510508](https://maedler.in/product/nut-din-508-for-t-slot-8mm-din-650-thread-m5-quality-10-sku-65510508/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 6mm DIN 650 thread M5 quality 10 zinc plated SKU: 65510506VZ](https://maedler.in/product/nut-din-508-for-t-slot-6mm-din-650-thread-m5-quality-10-zinc-plated-sku-65510506vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 6mm DIN 650 thread M5 quality 10 SKU: 65510506R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-6mm-din-650-thread-m5-quality-10-sku-65510506r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 6mm DIN 650 thread M5 1.4571 SKU: 65510506LA4](https://maedler.in/product/nut-din-508-long-for-t-slot-6mm-din-650-thread-m5-1-4571-sku-65510506la4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 long for T-slot 6mm DIN 650 thread M5 quality 10 SKU: 65510506L](https://maedler.in/product/nut-din-508-long-for-t-slot-6mm-din-650-thread-m5-quality-10-sku-65510506l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 6mm DIN 650 thread M5 material 1.4571 SKU: 65510506A4](https://maedler.in/product/nut-din-508-for-t-slot-6mm-din-650-thread-m5-material-1-4571-sku-65510506a4/): Material: Stainless steel 1.4571 (AISI 316).T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 6mm DIN 650 thread M5 quality 10 SKU: 65510506](https://maedler.in/product/nut-din-508-for-t-slot-6mm-din-650-thread-m5-quality-10-sku-65510506/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 6mm DIN 650 thread M4 quality 10 SKU: 65510406](https://maedler.in/product/nut-din-508-for-t-slot-6mm-din-650-thread-m4-quality-10-sku-65510406/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 5mm DIN 650 thread M4 quality 10 SKU: 65510405](https://maedler.in/product/nut-din-508-for-t-slot-5mm-din-650-thread-m4-quality-10-sku-65510405/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Spring plunger M24 with ball and internal hexagon strong spring tension stainless steel SKU: 65499924V](https://maedler.in/product/spring-plunger-m24-with-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499924v/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M24 with ball and internal hexagon stainless steel SKU: 65499924](https://maedler.in/product/spring-plunger-m24-with-ball-and-internal-hexagon-stainless-steel-sku-65499924/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M20 with ball and internal hexagon strong spring tension stainless steel SKU: 65499920V](https://maedler.in/product/spring-plunger-m20-with-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499920v/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M20 with ball and internal hexagon stainless steel SKU: 65499920](https://maedler.in/product/spring-plunger-m20-with-ball-and-internal-hexagon-stainless-steel-sku-65499920/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M16 with moving ball and internal hexagon strong spring tension stainless steel SKU: 65499916VB](https://maedler.in/product/spring-plunger-m16-with-moving-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499916vb/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M16 with ball and internal hexagon strong spring tension stainless steel SKU: 65499916V](https://maedler.in/product/spring-plunger-m16-with-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499916v/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M16 with moving ball and internal hexagon stainless steel SKU: 65499916B](https://maedler.in/product/spring-plunger-m16-with-moving-ball-and-internal-hexagon-stainless-steel-sku-65499916b/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M16 with ball and internal hexagon stainless steel SKU: 65499916](https://maedler.in/product/spring-plunger-m16-with-ball-and-internal-hexagon-stainless-steel-sku-65499916/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M12 with moving ball and internal hexagon strong spring tension stainless steel SKU: 65499912VB](https://maedler.in/product/spring-plunger-m12-with-moving-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499912vb/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M12 with ball and internal hexagon strong spring tension stainless steel SKU: 65499912V](https://maedler.in/product/spring-plunger-m12-with-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499912v/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M12 with moving ball and internal hexagon stainless steel SKU: 65499912B](https://maedler.in/product/spring-plunger-m12-with-moving-ball-and-internal-hexagon-stainless-steel-sku-65499912b/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M12 with ball and internal hexagon stainless steel SKU: 65499912](https://maedler.in/product/spring-plunger-m12-with-ball-and-internal-hexagon-stainless-steel-sku-65499912/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M10 with moving ball and internal hexagon strong spring tension stainless steel SKU: 65499910VB](https://maedler.in/product/spring-plunger-m10-with-moving-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499910vb/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M10 with ball and internal hexagon strong spring tension stainless steel SKU: 65499910V](https://maedler.in/product/spring-plunger-m10-with-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499910v/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M10 with moving ball and internal hexagon stainless steel SKU: 65499910B](https://maedler.in/product/spring-plunger-m10-with-moving-ball-and-internal-hexagon-stainless-steel-sku-65499910b/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M10 with ball and internal hexagon stainless steel SKU: 65499910](https://maedler.in/product/spring-plunger-m10-with-ball-and-internal-hexagon-stainless-steel-sku-65499910/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M8 with moving ball and internal hexagon strong spring tension stainless steel SKU: 65499908VB](https://maedler.in/product/spring-plunger-m8-with-moving-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499908vb/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M8 with ball and internal hexagon strong spring tension stainless steel SKU: 65499908V](https://maedler.in/product/spring-plunger-m8-with-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499908v/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M8 with moving ball and internal hexagon stainless steel SKU: 65499908B](https://maedler.in/product/spring-plunger-m8-with-moving-ball-and-internal-hexagon-stainless-steel-sku-65499908b/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M8 with ball and internal hexagon stainless steel SKU: 65499908](https://maedler.in/product/spring-plunger-m8-with-ball-and-internal-hexagon-stainless-steel-sku-65499908/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Spring plunger M6 with moving ball and internal hexagon strong spring tension stainless steel SKU: 65499906VB](https://maedler.in/product/spring-plunger-m6-with-moving-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499906vb/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, strong spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M6 with ball and internal hexagon strong spring tension stainless steel SKU: 65499906V](https://maedler.in/product/spring-plunger-m6-with-ball-and-internal-hexagon-strong-spring-tension-stainless-steel-sku-65499906v/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Spring: Stainless steel, strong spring tension.Temperature range: -40ºC to +250ºC.* Statistical average - [Spring plunger M6 with moving ball and internal hexagon stainless steel SKU: 65499906B](https://maedler.in/product/spring-plunger-m6-with-moving-ball-and-internal-hexagon-stainless-steel-sku-65499906b/): Material type stainless: Body: Stainless steel. Ball: Stainless steel, hardened. Bearing: Plastic. Spring: Stainless steel, standard spring tension.Temperature range: -30ºC bis +90ºC.* Statistical average - [Spring plunger M6 with ball and internal hexagon stainless steel SKU: 65499906](https://maedler.in/product/spring-plunger-m6-with-ball-and-internal-hexagon-stainless-steel-sku-65499906/): Material: Body: Stainless Steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Spring: Stainless steel, Standard spring load Used for fixation or as device to press something in or push it out. Temperature range: -40°C to +250°C. *statistical average - [Rear hinge mounting with snap ring for cylinder diameter 20/25mm SKU: 81002320](https://maedler.in/product/rear-hinge-mounting-with-snap-ring-for-cylinder-diameter-20-25mm-sku-81002320/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with snap ring for cylinder diameter 12/16mm SKU: 81002312](https://maedler.in/product/rear-hinge-mounting-with-snap-ring-for-cylinder-diameter-12-16mm-sku-81002312/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with snap ring for cylinder diameter 10mm SKU: 81002310](https://maedler.in/product/rear-hinge-mounting-with-snap-ring-for-cylinder-diameter-10mm-sku-81002310/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with cotter pin for cylinder diameter 20/25mm SKU: 81002220](https://maedler.in/product/rear-hinge-mounting-with-cotter-pin-for-cylinder-diameter-20-25mm-sku-81002220/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with cotter pin for cylinder diameter 12/16mm SKU: 81002212](https://maedler.in/product/rear-hinge-mounting-with-cotter-pin-for-cylinder-diameter-12-16mm-sku-81002212/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Rear hinge mounting with cotter pin for cylinder diameter 10mm SKU: 81002210](https://maedler.in/product/rear-hinge-mounting-with-cotter-pin-for-cylinder-diameter-10mm-sku-81002210/): Materials: Mounting: Steel, zinc-plated. Bolts: Stainless Steel. Mating bracket for rear end mounting. - [Detachable trunnion mounting for cylinder diameter 20/25mm SKU: 81002120](https://maedler.in/product/detachable-trunnion-mounting-for-cylinder-diameter-20-25mm-sku-81002120/): Material: teel, zinc-plated. Mounting element at the bearing or end cover. - [Detachable trunnion mounting for cylinder diameter 12/16mm SKU: 81002112](https://maedler.in/product/detachable-trunnion-mounting-for-cylinder-diameter-12-16mm-sku-81002112/): Material: teel, zinc-plated. Mounting element at the bearing or end cover. - [Foot for cylinder diameter 20/25mm SKU: 81002020](https://maedler.in/product/foot-for-cylinder-diameter-20-25mm-sku-81002020/): Materials: Mounting: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Foot for cylinder diameter 12mm SKU: 81002012](https://maedler.in/product/foot-for-cylinder-diameter-12mm-sku-81002012/): Materials: Mounting: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Foot for cylinder diameter 10mm SKU: 81002010](https://maedler.in/product/foot-for-cylinder-diameter-10mm-sku-81002010/): Materials: Mounting: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Switch mounting bracket for magnetic switch for cylinder diameter 25mm SKU: 81001725](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-25mm-sku-81001725/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Switch mounting bracket for magnetic switch for cylinder diameter 20mm SKU: 81001720](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-20mm-sku-81001720/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Switch mounting bracket for magnetic switch for cylinder diameter 16mm SKU: 81001716](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-16mm-sku-81001716/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Switch mounting bracket for magnetic switch for cylinder diameter 12mm SKU: 81001712](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-12mm-sku-81001712/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Switch mounting bracket for magnetic switch for cylinder diameter 10mm SKU: 81001710](https://maedler.in/product/switch-mounting-bracket-for-magnetic-switch-for-cylinder-diameter-10mm-sku-81001710/): Materials: Mounting: Plastic. Screw: Steel, zinc-plated. - [Swivel bearing set for detachable trunnion mounting for cylinder diameter 63/80mm SKU: 81001563](https://maedler.in/product/swivel-bearing-set-for-detachable-trunnion-mounting-for-cylinder-diameter-63-80mm-sku-81001563/): Materials: Mounting: Aluminium. Bearing: Sintered bronze. Mounting element for Trunnion Mounting. 2 bearings included in delivery. - [Swivel bearing set for detachable trunnion mounting for cylinder diameter 40/50mm SKU: 81001540](https://maedler.in/product/swivel-bearing-set-for-detachable-trunnion-mounting-for-cylinder-diameter-40-50mm-sku-81001540/): Materials: Mounting: Aluminium. Bearing: Sintered bronze. Mounting element for Trunnion Mounting. 2 bearings included in delivery. - [Swivel bearing set for detachable trunnion mounting for cylinder diameter 32mm SKU: 81001532](https://maedler.in/product/swivel-bearing-set-for-detachable-trunnion-mounting-for-cylinder-diameter-32mm-sku-81001532/): Materials: Mounting: Aluminium. Bearing: Sintered bronze. Mounting element for Trunnion Mounting. 2 bearings included in delivery. - [Detachable trunnion mounting (front or rear) for cylinder diameter 80mm SKU: 81001380](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-80mm-sku-81001380/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Detachable trunnion mounting (front or rear) for cylinder diameter 63mm SKU: 81001363](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-63mm-sku-81001363/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Detachable trunnion mounting (front or rear) for cylinder diameter 50mm SKU: 81001350](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-50mm-sku-81001350/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Detachable trunnion mounting (front or rear) for cylinder diameter 40mm SKU: 81001340](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-40mm-sku-81001340/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Detachable trunnion mounting (front or rear) for cylinder diameter 32mm SKU: 81001332](https://maedler.in/product/detachable-trunnion-mounting-front-or-rear-for-cylinder-diameter-32mm-sku-81001332/): Materials: Mounting: Grey cast iron, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Universal rear eye with ball joint for cylinder diameter 80mm SKU: 81001280](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-80mm-sku-81001280/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Universal rear eye with ball joint for cylinder diameter 63mm SKU: 81001263](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-63mm-sku-81001263/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Universal rear eye with ball joint for cylinder diameter 50mm SKU: 81001250](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-50mm-sku-81001250/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Universal rear eye with ball joint for cylinder diameter 40mm SKU: 81001240](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-40mm-sku-81001240/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Universal rear eye with ball joint for cylinder diameter 32mm SKU: 81001232](https://maedler.in/product/universal-rear-eye-with-ball-joint-for-cylinder-diameter-32mm-sku-81001232/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Inner Ring: Bearing Steel, hardened. Outer Ring: Steel. Mounting element at the end cover. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 80mm SKU: 81001180](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-80mm-sku-81001180/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 63mm SKU: 81001163](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-63mm-sku-81001163/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 50mm SKU: 81001150](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-50mm-sku-81001150/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 40mm SKU: 81001140](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-40mm-sku-81001140/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting with spherical bearing for cylinder diameter 32mm SKU: 81001132](https://maedler.in/product/bracket-hinge-for-clevis-mounting-with-spherical-bearing-for-cylinder-diameter-32mm-sku-81001132/): Materials: Bracket hinge: grey cast iron, zinc-plated. Inner ring: Bearing steel, hardened. Outer ring: Steel. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 80mm SKU: 81001080](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-80mm-sku-81001080/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 63mm SKU: 81001063](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-63mm-sku-81001063/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 50mm SKU: 81001050](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-50mm-sku-81001050/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 40mm SKU: 81001040](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-40mm-sku-81001040/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, wide version for cylinder diameter 32mm SKU: 81001032](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-wide-version-for-cylinder-diameter-32mm-sku-81001032/): Material: Aluminium die-cast. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 80mm SKU: 81000980](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-80mm-sku-81000980/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 63mm SKU: 81000963](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-63mm-sku-81000963/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 50mm SKU: 81000950](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-50mm-sku-81000950/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 40mm SKU: 81000940](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-40mm-sku-81000940/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Bracket hinge for clevis mounting, rigid, narrow version for cylinder diameter 32mm SKU: 81000932](https://maedler.in/product/bracket-hinge-for-clevis-mounting-rigid-narrow-version-for-cylinder-diameter-32mm-sku-81000932/): Material: Grey cast iron, coated. Mating Piece for Clevis Mounting. - [Rear clevis , narrow version for cylinder diameter 80mm SKU: 81000880](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-80mm-sku-81000880/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis , narrow version for cylinder diameter 63mm SKU: 81000863](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-63mm-sku-81000863/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis , narrow version for cylinder diameter 50mm SKU: 81000850](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-50mm-sku-81000850/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis , narrow version for cylinder diameter 40mm SKU: 81000840](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-40mm-sku-81000840/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis , narrow version for cylinder diameter 32mm SKU: 81000832](https://maedler.in/product/rear-clevis-narrow-version-for-cylinder-diameter-32mm-sku-81000832/): Materials: Mounting: Steel, coated Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 80mm SKU: 81000780](https://maedler.in/product/rear-clevis-for-cylinder-diameter-80mm-sku-81000780/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 63mm SKU: 81000763](https://maedler.in/product/rear-clevis-for-cylinder-diameter-63mm-sku-81000763/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 50mm SKU: 81000750](https://maedler.in/product/rear-clevis-for-cylinder-diameter-50mm-sku-81000750/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 40mm SKU: 81000740](https://maedler.in/product/rear-clevis-for-cylinder-diameter-40mm-sku-81000740/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rear clevis for cylinder diameter 32mm SKU: 81000732](https://maedler.in/product/rear-clevis-for-cylinder-diameter-32mm-sku-81000732/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Bolts: Stainless steel. Mounting element at the end cover. - [Rod end with ball joint for cylinder diameter 80mm thread M20x1,5 SKU: 81000580](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-80mm-thread-m20x15-sku-81000580/): Materials: Mounting: Steel, zinc plated. Inner ring: Bearing steel, hardened. Outer ring: Brass. Mounting element at the piston rod. - [Rod end with ball joint for cylinder diameter 50/63mm thread M16x1,5 SKU: 81000550](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-50-63mm-thread-m16x15-sku-81000550/): Materials: Mounting: Steel, zinc plated. Inner ring: Bearing steel, hardened. Outer ring: Brass. Mounting element at the piston rod. - [Rod end with ball joint for cylinder diameter 40mm thread M12x1,25 SKU: 81000540](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-40mm-thread-m12x125-sku-81000540/): Materials: Mounting: Steel, zinc plated. Inner ring: Bearing steel, hardened. Outer ring: Brass. Mounting element at the piston rod. - [Rod end with ball joint for cylinder diameter 25/32mm thread M10x1,25 SKU: 81000525](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-25-32mm-thread-m10x125-sku-81000525/): Materials: Mounting: Steel, zinc plated. Inner ring: Bearing steel, hardened. Outer ring: Brass. Mounting element at the piston rod. - [Rod end with ball joint for cylinder diameter 20mm thread M8 SKU: 81000520](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-20mm-thread-m8-sku-81000520/): Materials: Housing: Brass. Mounting: Steel, zinc-plated. Inner ring: Roller bearing steel, hardened. Mounting element at the piston rod according to DIN ISO 8139 / CETOP RP 103 P. - [Rod end with ball joint for cylinder diameter 12mm thread M6 SKU: 81000512](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-12mm-thread-m6-sku-81000512/): Materials: Housing: Brass. Mounting: Steel, zinc-plated. Inner ring: Roller bearing steel, hardened. Mounting element at the piston rod according to DIN ISO 8139 / CETOP RP 103 P. - [Rod end with ball joint for cylinder diameter 10mm thread M4 SKU: 81000510](https://maedler.in/product/rod-end-with-ball-joint-for-cylinder-diameter-10mm-thread-m4-sku-81000510/): Materials: Housing: Brass. Mounting: Steel, zinc-plated. Inner ring: Roller bearing steel, hardened. Mounting element at the piston rod according to DIN ISO 8139 / CETOP RP 103 P. - [Universal rear eye for cylinder diameter 80mm SKU: 81000480](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-80mm-sku-81000480/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 63mm SKU: 81000463](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-63mm-sku-81000463/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 50mm SKU: 81000450](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-50mm-sku-81000450/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 40mm SKU: 81000440](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-40mm-sku-81000440/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 32mm SKU: 81000432](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-32mm-sku-81000432/): Materials: Mounting: Aluminium die-cast. Screws: Steel, zinc plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 25mm SKU: 81000425](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-25mm-sku-81000425/): Materials: Mounting: Aluminium, die-cast. Screws: Steel, zinc-plated. Mounting element at the end cover. - [Universal rear eye for cylinder diameter 20mm SKU: 81000420](https://maedler.in/product/universal-rear-eye-for-cylinder-diameter-20mm-sku-81000420/): Materials: Mounting: Aluminium, die-cast. Screws: Steel, zinc-plated. Mounting element at the end cover. - [Fork head for cylinder diameter 80mm M20x1,5 SKU: 81000380](https://maedler.in/product/fork-head-for-cylinder-diameter-80mm-m20x15-sku-81000380/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 50/63mm M16x1,5 SKU: 81000350](https://maedler.in/product/fork-head-for-cylinder-diameter-50-63mm-m16x15-sku-81000350/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 40mm M12x1,25 SKU: 81000340](https://maedler.in/product/fork-head-for-cylinder-diameter-40mm-m12x125-sku-81000340/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 25/32mm M10x1,25 SKU: 81000325](https://maedler.in/product/fork-head-for-cylinder-diameter-25-32mm-m10x125-sku-81000325/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 20mm thread M8 SKU: 81000320](https://maedler.in/product/fork-head-for-cylinder-diameter-20mm-thread-m8-sku-81000320/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 12mm thread M6 SKU: 81000312](https://maedler.in/product/fork-head-for-cylinder-diameter-12mm-thread-m6-sku-81000312/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Fork head for cylinder diameter 10mm thread M4 SKU: 81000310](https://maedler.in/product/fork-head-for-cylinder-diameter-10mm-thread-m4-sku-81000310/): Materials: Mounting: Steel, zinc plated. Bolt: Steel, zinc plated. Mounting element at the piston rod. - [Foot for cylinder diameter 80mm SKU: 81000280](https://maedler.in/product/foot-for-cylinder-diameter-80mm-sku-81000280/): Materials: Mounting: Steel, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing and at the end cover. - [Foot for cylinder diameter 63mm SKU: 81000263](https://maedler.in/product/foot-for-cylinder-diameter-63mm-sku-81000263/): Materials: Mounting: Steel, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing and at the end cover. - [Foot for cylinder diameter 50mm SKU: 81000250](https://maedler.in/product/foot-for-cylinder-diameter-50mm-sku-81000250/): Materials: Mounting: Steel, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing and at the end cover. - [Foot for cylinder diameter 40mm SKU: 81000240](https://maedler.in/product/foot-for-cylinder-diameter-40mm-sku-81000240/): Materials: Mounting: Steel, zinc plated. Screws: Steel, zinc plated. Mounting element at the bearing and at the end cover. - [Foot for cylinder diameter 32mm SKU: 81000232](https://maedler.in/product/foot-for-cylinder-diameter-32mm-sku-81000232/): Materials: Mounting: Steel, zinc-plated. Screws: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Foot for cylinder diameter 25mm SKU: 81000225](https://maedler.in/product/foot-for-cylinder-diameter-25mm-sku-81000225/): Materials: Mounting: Steel, zinc-plated. Screws: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Foot for cylinder diameter 20mm SKU: 81000220](https://maedler.in/product/foot-for-cylinder-diameter-20mm-sku-81000220/): Materials: Mounting: Steel, zinc-plated. Screws: Steel, zinc-plated. Mounting element at the bearing and end cover. - [Front and rear flange for cylinder diameter 80mm SKU: 81000180](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-80mm-sku-81000180/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Front and rear flange for cylinder diameter 63mm SKU: 81000163](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-63mm-sku-81000163/): Materials: Mounting: Aluminium. Screws: Steel, zinc plated. Mounting element at the bearing or at the end cover. - [Front and rear flange for cylinder diameter 50mm SKU: 81000150](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-50mm-sku-81000150/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Front and rear flange for cylinder diameter 40mm SKU: 81000140](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-40mm-sku-81000140/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Front and rear flange for cylinder diameter 32mm SKU: 81000132](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-32mm-sku-81000132/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Front and rear flange for cylinder diameter 20mm SKU: 81000120](https://maedler.in/product/front-and-rear-flange-for-cylinder-diameter-20mm-sku-81000120/): Materials: Flange: Anodised Aluminium. Screws: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Beam coupling for cylinder diameter 80mm thread M20x1,5 SKU: 81000080](https://maedler.in/product/beam-coupling-for-cylinder-diameter-80mm-thread-m20x15-sku-81000080/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 50/63mm thread M16x1,5 SKU: 81000050](https://maedler.in/product/beam-coupling-for-cylinder-diameter-50-63mm-thread-m16x15-sku-81000050/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 40mm thread M12x1,25 SKU: 81000040](https://maedler.in/product/beam-coupling-for-cylinder-diameter-40mm-thread-m12x125-sku-81000040/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 25/32 mm thread M10x1,25 SKU: 81000025](https://maedler.in/product/beam-coupling-for-cylinder-diameter-25-32-mm-thread-m10x125-sku-81000025/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 20mm SKU: 81000020](https://maedler.in/product/beam-coupling-for-cylinder-diameter-20mm-sku-81000020/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 12mm SKU: 81000012](https://maedler.in/product/beam-coupling-for-cylinder-diameter-12mm-sku-81000012/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Beam coupling for cylinder diameter 10mm SKU: 81000010](https://maedler.in/product/beam-coupling-for-cylinder-diameter-10mm-sku-81000010/): Materials: Housing: Steel, zinc plated. Bolt: Steel, hardened. Nut: Steel, zinc plated. Mounting element at the piston rod. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 200mm SKU: 80525200](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-200mm-sku-80525200/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 160mm SKU: 80525160](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-160mm-sku-80525160/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 125mm SKU: 80525125](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-125mm-sku-80525125/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 100mm SKU: 80525100](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-100mm-sku-80525100/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Double-acting round cylinder in accordance with ISO 6432 with magnetic piston, cylinder diameter 25mm, travel 80mm SKU: 80525080](https://maedler.in/product/double-acting-round-cylinder-in-accordance-with-iso-6432-with-magnetic-piston-cylinder-diameter-25mm-travel-80mm-sku-80525080/): Materials: Profile Barrel: Stainless Steel (austenitic). End Covers: Anodised Aluminium, Piston Rod: Stainless Steel (austenitic). Wiper: Polyurethane, Buffer cushioning: Polyurethane, Seals: NBR. Medium: Compressed air, filtered, lubricated or non-lubricated. Standard: ISO 6432. Mode of Operation: Double-acting with magnetic piston and buffer pushioning. Operating pressure: 1 to 10 bar. Operating temperature: 80°C max. - [Spherical washer DIN6319 form C inner Ø 13mm outerØ 24mm for bolt diameter12mm stainless steel 1.4401 / AISI316 SKU: 65599462](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-13mm-outero-24mm-for-bolt-diameter12mm-stainless-steel-1-4401-aisi316-sku-65599462/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 10,5mm outerØ 21mm for bolt diameter10mm stainless steel 1.4401 / AISI316 SKU: 65599460](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-105mm-outero-21mm-for-bolt-diameter10mm-stainless-steel-1-4401-aisi316-sku-65599460/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 8,4mm outerØ 17mm for bolt diameter8mm stainless steel 1.4401 / AISI316 SKU: 65599458](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-84mm-outero-17mm-for-bolt-diameter8mm-stainless-steel-1-4401-aisi316-sku-65599458/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 6,4mm outerØ 12mm for bolt diameter6mm stainless steel 1.4401 / AISI316 SKU: 65599456](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-64mm-outero-12mm-for-bolt-diameter6mm-stainless-steel-1-4401-aisi316-sku-65599456/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer similar DIN6319 form C inner Ø 5,25mm outerØ 10,5mm for bolt diameter 5mm stainless steel 1.4401 / AISI316 SKU: 65599455](https://maedler.in/product/spherical-washer-similar-din6319-form-c-inner-o-525mm-outero-105mm-for-bolt-diameter-5mm-stainless-steel-1-4401-aisi316-sku-65599455/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 92mm stainless steel 1.4301 SKU: 65599448](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-92mm-stainless-steel-1-4301-sku-65599448/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 78mm stainless steel 1.4301 SKU: 65599442](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-78mm-stainless-steel-1-4301-sku-65599442/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 68mm stainless steel 1.4301 SKU: 65599436](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-68mm-stainless-steel-1-4301-sku-65599436/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 56mm stainless steel 1.4301 SKU: 65599430](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-56mm-stainless-steel-1-4301-sku-65599430/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 44mm stainless steel 1.4301 SKU: 65599424](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-44mm-stainless-steel-1-4301-sku-65599424/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 36mm stainless steel 1.4301 SKU: 65599420](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-36mm-stainless-steel-1-4301-sku-65599420/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 30mm stainless steel 1.4301 SKU: 65599416](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-30mm-stainless-steel-1-4301-sku-65599416/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 28mm stainless steel 1.4301 SKU: 65599414](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-28mm-stainless-steel-1-4301-sku-65599414/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 24mm stainless steel 1.4301 SKU: 65599412](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-24mm-stainless-steel-1-4301-sku-65599412/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 21mm stainless steel 1.4301 SKU: 65599410](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-21mm-stainless-steel-1-4301-sku-65599410/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 17mm stainless steel 1.4301 SKU: 65599408](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-17mm-stainless-steel-1-4301-sku-65599408/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN 6319 form C outer diameter 12mm stainless steel 1.4301 SKU: 65599406](https://maedler.in/product/spherical-washer-din-6319-form-c-outer-diameter-12mm-stainless-steel-1-4301-sku-65599406/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer similar DIN 6319 form C outer diameter 10,5mm stainless steel 1.4301 SKU: 65599405](https://maedler.in/product/spherical-washer-similar-din-6319-form-c-outer-diameter-105mm-stainless-steel-1-4301-sku-65599405/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [conical seat DIN6319 form D PTFE-coated inner-Ø 56mm outer-Ø 92mm SKU: 65598548](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-56mm-outer-o-92mm-sku-65598548/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 49mm outer-Ø 78mm SKU: 65598540](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-49mm-outer-o-78mm-sku-65598540/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 42mm outer-Ø 68mm SKU: 65598536](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-42mm-outer-o-68mm-sku-65598536/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 35mm outer-Ø 56mm SKU: 65598530](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-35mm-outer-o-56mm-sku-65598530/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 28mm outer-Ø 44mm SKU: 65598524](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-28mm-outer-o-44mm-sku-65598524/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 23,2mm outer-Ø 36mm SKU: 65598520](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-232mm-outer-o-36mm-sku-65598520/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 19mm outer-Ø 30mm SKU: 65598516](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-19mm-outer-o-30mm-sku-65598516/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 16,5mm outer-Ø 28mm SKU: 65598514](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-165mm-outer-o-28mm-sku-65598514/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 14,2mm outer-Ø 24mm SKU: 65598512](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-142mm-outer-o-24mm-sku-65598512/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 12mm outer-Ø 21mm SKU: 65598510](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-12mm-outer-o-21mm-sku-65598510/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 9,6mm outer-Ø 17mm SKU: 65598508](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-96mm-outer-o-17mm-sku-65598508/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat DIN6319 form D PTFE-coated inner-Ø 7,1mm outer-Ø 12mm SKU: 65598506](https://maedler.in/product/conical-seat-din6319-form-d-ptfe-coated-inner-o-71mm-outer-o-12mm-sku-65598506/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [conical seat similar DIN6319 form D PTFE-coated inner-Ø 6mm outer-Ø 10,5mm SKU: 65598505](https://maedler.in/product/conical-seat-similar-din6319-form-d-ptfe-coated-inner-o-6mm-outer-o-105mm-sku-65598505/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 50mm outer-Ø 92mm SKU: 65598448](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-50mm-outer-o-92mm-sku-65598448/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 43mm outer-Ø 78mm SKU: 65598440](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-43mm-outer-o-78mm-sku-65598440/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 37mm outer-Ø 68mm SKU: 65598436](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-37mm-outer-o-68mm-sku-65598436/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 31mm outer-Ø 56mm SKU: 65598430](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-31mm-outer-o-56mm-sku-65598430/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 25mm outer-Ø 44mm SKU: 65598424](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-25mm-outer-o-44mm-sku-65598424/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 21mm outer-Ø 36mm SKU: 65598420](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-21mm-outer-o-36mm-sku-65598420/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 17mm outer-Ø 30mm SKU: 65598416](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-17mm-outer-o-30mm-sku-65598416/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 15mm outer-Ø 28mm SKU: 65598414](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-15mm-outer-o-28mm-sku-65598414/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 13mm outer-Ø 24mm SKU: 65598412](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-13mm-outer-o-24mm-sku-65598412/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 10,5mm outer-Ø 21mm SKU: 65598410](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-105mm-outer-o-21mm-sku-65598410/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 8,4mm outer-Ø 17mm SKU: 65598408](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-84mm-outer-o-17mm-sku-65598408/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer DIN6319 form C PTFE-coated inner-Ø 6,4mm outer-Ø 12mm SKU: 65598406](https://maedler.in/product/spherical-washer-din6319-form-c-ptfe-coated-inner-o-64mm-outer-o-12mm-sku-65598406/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [spherical washer similar DIN6319 form C PTFE-coated inner-Ø 5,25mm outer-Ø 10,5mm SKU: 65598405](https://maedler.in/product/spherical-washer-similar-din6319-form-c-ptfe-coated-inner-o-525mm-outer-o-105mm-sku-65598405/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. PTFE coated, blue-coloured. The very low friction enables precise adjusting at high wear resistance. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. - [Conical seat DIN 6319 form G diameter 68mm for bolt diameter 30mm steel hardened SKU: 65563000](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-68mm-for-bolt-diameter-30mm-steel-hardened-sku-65563000/): Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 60mm for bolt diameter 24mm steel hardened SKU: 65562400](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-60mm-for-bolt-diameter-24mm-steel-hardened-sku-65562400/): Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 50mm for bolt diameter 20mm steel hardened SKU: 65562000](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-50mm-for-bolt-diameter-20mm-steel-hardened-sku-65562000/): Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 44mm for bolt diameter 16mm steel hardened SKU: 65561600](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-44mm-for-bolt-diameter-16mm-steel-hardened-sku-65561600/): Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 40mm for bolt diameter 14mm steel hardened SKU: 65561400](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-40mm-for-bolt-diameter-14mm-steel-hardened-sku-65561400/): Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 36mm for bolt diameter 12mm steel hardened SKU: 65561200](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-36mm-for-bolt-diameter-12mm-steel-hardened-sku-65561200/): Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 30mm for bolt diameter 10mm steel hardened SKU: 65561000](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-30mm-for-bolt-diameter-10mm-steel-hardened-sku-65561000/): Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 24mm for bolt diameter 8mm steel hardened SKU: 65560800](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-24mm-for-bolt-diameter-8mm-steel-hardened-sku-65560800/): Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 17mm for bolt diameter 6mm steel hardened SKU: 65560600](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-17mm-for-bolt-diameter-6mm-steel-hardened-sku-65560600/): Material: Steel, bright turned, tempered steel, phosphated and oiled. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 92mm for bolt diameter 48mm steel hardened SKU: 65554800](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-92mm-for-bolt-diameter-48mm-steel-hardened-sku-65554800/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 78mm for bolt diameter 42mm steel hardened SKU: 65554000](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-78mm-for-bolt-diameter-42mm-steel-hardened-sku-65554000/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 68mm for bolt diameter 36mm steel hardened SKU: 65553600](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-68mm-for-bolt-diameter-36mm-steel-hardened-sku-65553600/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 56mm for bolt diameter 30mm steel hardened SKU: 65553000](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-56mm-for-bolt-diameter-30mm-steel-hardened-sku-65553000/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 44mm for bolt diameter 24mm steel hardened SKU: 65552400](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-44mm-for-bolt-diameter-24mm-steel-hardened-sku-65552400/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 36mm for bolt diameter 20mm steel hardened SKU: 65552000](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-36mm-for-bolt-diameter-20mm-steel-hardened-sku-65552000/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 30mm for bolt diameter 16mm steel hardened SKU: 65551600](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-30mm-for-bolt-diameter-16mm-steel-hardened-sku-65551600/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 28mm for bolt diameter 14mm steel hardened SKU: 65551400](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-28mm-for-bolt-diameter-14mm-steel-hardened-sku-65551400/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 24mm for bolt diameter 12mm steel hardened SKU: 65551200](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-24mm-for-bolt-diameter-12mm-steel-hardened-sku-65551200/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 21mm for bolt diameter 10mm steel hardened SKU: 65551000](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-21mm-for-bolt-diameter-10mm-steel-hardened-sku-65551000/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 17mm for bolt diameter 8mm steel hardened SKU: 65550800](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-17mm-for-bolt-diameter-8mm-steel-hardened-sku-65550800/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form D diameter 12mm for bolt diameter 6mm steel hardened SKU: 65550600](https://maedler.in/product/conical-seat-din-6319-form-d-diameter-12mm-for-bolt-diameter-6mm-steel-hardened-sku-65550600/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat similar DIN 6319 form D diameter 10,5mm for bolt diameter 5mm steel hardened SKU: 65550500](https://maedler.in/product/conical-seat-similar-din-6319-form-d-diameter-105mm-for-bolt-diameter-5mm-steel-hardened-sku-65550500/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 92mm for bolt diameter 48mm steel hardened SKU: 65544800](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-92mm-for-bolt-diameter-48mm-steel-hardened-sku-65544800/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 78mm for bolt diameter 42mm steel hardened SKU: 65544000](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-78mm-for-bolt-diameter-42mm-steel-hardened-sku-65544000/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 68mm for bolt diameter 36mm steel hardened SKU: 65543600](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-68mm-for-bolt-diameter-36mm-steel-hardened-sku-65543600/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 56mm for bolt diameter 30mm steel hardened SKU: 65543000](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-56mm-for-bolt-diameter-30mm-steel-hardened-sku-65543000/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 44mm for bolt diameter 24mm steel hardened SKU: 65542400](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-44mm-for-bolt-diameter-24mm-steel-hardened-sku-65542400/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 36mm for bolt diameter 20mm steel hardened SKU: 65542000](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-36mm-for-bolt-diameter-20mm-steel-hardened-sku-65542000/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 30mm for bolt diameter 16mm steel hardened SKU: 65541600](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-30mm-for-bolt-diameter-16mm-steel-hardened-sku-65541600/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 28mm for bolt diameter 14mm steel hardened SKU: 65541400](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-28mm-for-bolt-diameter-14mm-steel-hardened-sku-65541400/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 24mm for bolt diameter 12mm steel hardened SKU: 65541200](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-24mm-for-bolt-diameter-12mm-steel-hardened-sku-65541200/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 21mm for bolt diameter 10mm steel hardened SKU: 65541000](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-21mm-for-bolt-diameter-10mm-steel-hardened-sku-65541000/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 17mm for bolt diameter 8mm steel hardened SKU: 65540800](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-17mm-for-bolt-diameter-8mm-steel-hardened-sku-65540800/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer DIN 6319 form C diameter 12mm for bolt diameter 6mm steel hardened SKU: 65540600](https://maedler.in/product/spherical-washer-din-6319-form-c-diameter-12mm-for-bolt-diameter-6mm-steel-hardened-sku-65540600/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Spherical washer similar DIN 6319 form C diameter 10,5mm for bolt diameter 5mm steel hardened SKU: 65540500](https://maedler.in/product/spherical-washer-similar-din-6319-form-c-diameter-105mm-for-bolt-diameter-5mm-steel-hardened-sku-65540500/): Material: Steel, bright, turned, case hardened, hardening depth min. 0.2 mm. Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Nut DIN 508 for T-slot 42mm DIN 650 thread M36 quality 10 zinc plated SKU: 65513642VZ](https://maedler.in/product/nut-din-508-for-t-slot-42mm-din-650-thread-m36-quality-10-zinc-plated-sku-65513642vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 42mm DIN 650 thread M36 quality 10 SKU: 65513642](https://maedler.in/product/nut-din-508-for-t-slot-42mm-din-650-thread-m36-quality-10-sku-65513642/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 36mm DIN 650 thread M30 quality 10 zinc plated SKU: 65513036VZ](https://maedler.in/product/nut-din-508-for-t-slot-36mm-din-650-thread-m30-quality-10-zinc-plated-sku-65513036vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 36mm DIN 650 thread M30 quality 10 SKU: 65513036R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-36mm-din-650-thread-m30-quality-10-sku-65513036r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 36mm DIN 650 thread M30 quality 10 SKU: 65513036L](https://maedler.in/product/nut-din-508-long-for-t-slot-36mm-din-650-thread-m30-quality-10-sku-65513036l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 36mm DIN 650 thread M30 quality 10 SKU: 65513036](https://maedler.in/product/nut-din-508-for-t-slot-36mm-din-650-thread-m30-quality-10-sku-65513036/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 28mm DIN 650 thread M24 quality 10 zinc plated SKU: 65512428VZ](https://maedler.in/product/nut-din-508-for-t-slot-28mm-din-650-thread-m24-quality-10-zinc-plated-sku-65512428vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 28mm DIN 650 thread M24 quality 10 SKU: 65512428R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-28mm-din-650-thread-m24-quality-10-sku-65512428r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 28mm DIN 650 thread M24 quality 10 SKU: 65512428L](https://maedler.in/product/nut-din-508-long-for-t-slot-28mm-din-650-thread-m24-quality-10-sku-65512428l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 28mm DIN 650 thread M24 quality 10 SKU: 65512428](https://maedler.in/product/nut-din-508-for-t-slot-28mm-din-650-thread-m24-quality-10-sku-65512428/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 24mm DIN 650 thread M22 quality 10 zinc plated SKU: 65512224VZ](https://maedler.in/product/nut-din-508-for-t-slot-24mm-din-650-thread-m22-quality-10-zinc-plated-sku-65512224vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 long for T-slot 24mm DIN 650 thread M22 quality 10 SKU: 65512224L](https://maedler.in/product/nut-din-508-long-for-t-slot-24mm-din-650-thread-m22-quality-10-sku-65512224l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 24mm DIN 650 thread M22 quality 10 SKU: 65512224](https://maedler.in/product/nut-din-508-for-t-slot-24mm-din-650-thread-m22-quality-10-sku-65512224/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 24mm DIN 650 thread M20 quality 10 zinc plated SKU: 65512024VZ](https://maedler.in/product/nut-din-508-for-t-slot-24mm-din-650-thread-m20-quality-10-zinc-plated-sku-65512024vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 24mm DIN 650 thread M20 quality 10 SKU: 65512024](https://maedler.in/product/nut-din-508-for-t-slot-24mm-din-650-thread-m20-quality-10-sku-65512024/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 22mm DIN 650 thread M20 quality 10 zinc plated SKU: 65512022VZ](https://maedler.in/product/nut-din-508-for-t-slot-22mm-din-650-thread-m20-quality-10-zinc-plated-sku-65512022vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 rhombus for T-slot 22mm DIN 650 thread M20 quality 10 SKU: 65512022R](https://maedler.in/product/nut-din-508-rhombus-for-t-slot-22mm-din-650-thread-m20-quality-10-sku-65512022r/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but in the shape of a rhombus. Suitable for T-slots DIN 650 / ISO 299.These rhombus nuts can be inserted into the slot from above. By this, long displacement travels may be prevented. Before tightening a screw, the nut must be aligned inside the slot. - [Nut DIN 508 long for T-slot 22mm DIN 650 thread M20 quality 10 SKU: 65512022L](https://maedler.in/product/nut-din-508-long-for-t-slot-22mm-din-650-thread-m20-quality-10-sku-65512022l/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with double length. These nuts can be placed e.g. in the centre of two crossing slots.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 with ball for T-slot 22mm DIN 650 thread M20 quality 10 SKU: 65512022K](https://maedler.in/product/nut-din-508-with-ball-for-t-slot-22mm-din-650-thread-m20-quality-10-sku-65512022k/): Material: Tempered steel, tensile strength 10, black.T-slot nuts like DIN 508, but with spring-loaded ball against unintended moving. The loose nut will be held, even in vertical position.Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 22mm DIN 650 thread M20 quality 10 SKU: 65512022](https://maedler.in/product/nut-din-508-for-t-slot-22mm-din-650-thread-m20-quality-10-sku-65512022/): Material: Tempered steel, tensile strength 10, black.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [Nut DIN 508 for T-slot 20mm DIN 650 thread M18 quality 10 zinc plated SKU: 65511820VZ](https://maedler.in/product/nut-din-508-for-t-slot-20mm-din-650-thread-m18-quality-10-zinc-plated-sku-65511820vz/): Material: Tempered steel, tensile strength 10, zinc-plated.T-slot nuts, according to DIN 508. Suitable for T-slots DIN 650 / ISO 299. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 52mm width 15mm with stainless steel shields on both sides SKU: SS-6205-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-52mm-width-15mm-with-stainless-steel-shields-on-both-sides-sku-ss-6205-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 47mm width 14mm with blue NBR seals on both sides SKU: SS-6204-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-47mm-width-14mm-with-blue-nbr-seals-on-both-sides-sku-ss-6204-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 47mm width 14mm with stainless steel shields on both sides SKU: SS-6204-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-47mm-width-14mm-with-stainless-steel-shields-on-both-sides-sku-ss-6204-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 40mm width 12mm with blue NBR seals on both sides SKU: SS-6203-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-40mm-width-12mm-with-blue-nbr-seals-on-both-sides-sku-ss-6203-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 40mm width 12mm with stainless steel shields on both sides SKU: SS-6203-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-40mm-width-12mm-with-stainless-steel-shields-on-both-sides-sku-ss-6203-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 35mm width 11mm with blue NBR seals on both sides SKU: SS-6202-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-35mm-width-11mm-with-blue-nbr-seals-on-both-sides-sku-ss-6202-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 35mm width 11mm with stainless steel shields on both sides SKU: SS-6202-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-35mm-width-11mm-with-stainless-steel-shields-on-both-sides-sku-ss-6202-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 32mm width 10mm with blue NBR seals on both sides SKU: SS-6201-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-32mm-width-10mm-with-blue-nbr-seals-on-both-sides-sku-ss-6201-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 32mm width 10mm with stainless steel shields on both sides SKU: SS-6201-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-32mm-width-10mm-with-stainless-steel-shields-on-both-sides-sku-ss-6201-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 30mm width 9mm with blue NBR seals on both sides SKU: SS-6200-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-30mm-width-9mm-with-blue-nbr-seals-on-both-sides-sku-ss-6200-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 30mm width 9mm with stainless steel shields on both sides SKU: SS-6200-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-30mm-width-9mm-with-stainless-steel-shields-on-both-sides-sku-ss-6200-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 45mm outer Ø 68mm width 12mm with blue NBR seals on both sides alternative marking 6909 SKU: SS-61909-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-45mm-outer-o-68mm-width-12mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6909-sku-ss-61909-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 40mm outer Ø 62mm width 12mm with blue NBR seals on both sides alternative marking 6908 SKU: SS-61908-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-40mm-outer-o-62mm-width-12mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6908-sku-ss-61908-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 55mm width 10mm with blue NBR seals on both sides alternative marking 6907 SKU: SS-61907-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-55mm-width-10mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6907-sku-ss-61907-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 47mm width 9mm with blue NBR seals on both sides alternative marking 6906 SKU: SS-61906-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-47mm-width-9mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6906-sku-ss-61906-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 42mm width 9mm with blue NBR seals on both sides alternative marking 6905 SKU: SS-61905-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-42mm-width-9mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6905-sku-ss-61905-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 37mm width 9mm with blue NBR seals on both sides alternative marking 6904 SKU: SS-61904-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-37mm-width-9mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6904-sku-ss-61904-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 30mm width 7mm with blue NBR seals on both sides alternative marking 6903 SKU: SS-61903-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-30mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6903-sku-ss-61903-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 28mm width 7mm with blue NBR seals on both sides alternative marking 6902 SKU: SS-61902-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-28mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6902-sku-ss-61902-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 28mm width 7mm with stainless steel shields on both sides alternative marking 6902 SKU: SS-61902-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-28mm-width-7mm-with-stainless-steel-shields-on-both-sides-alternative-marking-6902-sku-ss-61902-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 24mm width 6mm with blue NBR seals on both sides alternative marking 6901 SKU: SS-61901-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-24mm-width-6mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6901-sku-ss-61901-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 22mm width 6mm with blue NBR seals on both sides alternative marking 6900 SKU: SS-61900-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-22mm-width-6mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6900-sku-ss-61900-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 45mm outer Ø 58mm width 7mm with blue NBR seals on both sides alternative marking 6809 SKU: SS-61809-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-45mm-outer-o-58mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6809-sku-ss-61809-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 40mm outer Ø 52mm width 7mm with blue NBR seals on both sides alternative marking 6808 SKU: SS-61808-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-40mm-outer-o-52mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6808-sku-ss-61808-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 47mm width 7mm with blue NBR seals on both sides alternative marking 6807 SKU: SS-61807-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-47mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6807-sku-ss-61807-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 42mm width 7mm with blue NBR seals on both sides alternative marking 6806 SKU: SS-61806-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-42mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6806-sku-ss-61806-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 37mm width 7mm with blue NBR seals on both sides alternative marking 6805 SKU: SS-61805-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-37mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6805-sku-ss-61805-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 37mm width 7mm with stainless steel shields on both sides alternative marking 6805 SKU: SS-61805-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-37mm-width-7mm-with-stainless-steel-shields-on-both-sides-alternative-marking-6805-sku-ss-61805-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 32mm width 7mm with blue NBR seals on both sides alternative marking 6804 SKU: SS-61804-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-32mm-width-7mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6804-sku-ss-61804-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 26mm width 5mm with blue NBR seals on both sides alternative marking 6803 SKU: SS-61803-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-26mm-width-5mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6803-sku-ss-61803-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 24mm width 5mm with blue NBR seals on both sides alternative marking 6802 SKU: SS-61802-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-24mm-width-5mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6802-sku-ss-61802-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 21mm width 5mm with blue NBR seals on both sides alternative marking 6801 SKU: SS-61801-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-21mm-width-5mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6801-sku-ss-61801-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 21mm width 5mm with stainless steel shields on both sides alternative marking 6801 SKU: SS-61801-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-21mm-width-5mm-with-stainless-steel-shields-on-both-sides-alternative-marking-6801-sku-ss-61801-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 19mm width 5mm with blue NBR seals on both sides alternative marking 6800 SKU: SS-61800-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-19mm-width-5mm-with-blue-nbr-seals-on-both-sides-alternative-marking-6800-sku-ss-61800-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 9mm outer Ø24mm width 7mm with blue NBR seals on both sides SKU: SS-609-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-9mm-outer-o24mm-width-7mm-with-blue-nbr-seals-on-both-sides-sku-ss-609-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 9mm outer Ø 24mm width 7mm with stainless steel shields on both sides SKU: SS-609-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-9mm-outer-o-24mm-width-7mm-with-stainless-steel-shields-on-both-sides-sku-ss-609-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø22mm width 7mm with blue NBR seals on both sides SKU: SS-608-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o22mm-width-7mm-with-blue-nbr-seals-on-both-sides-sku-ss-608-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø 22mm width 7mm with stainless steel shields on both sides SKU: SS-608-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o-22mm-width-7mm-with-stainless-steel-shields-on-both-sides-sku-ss-608-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø19mm width 6mm with blue NBR seals on both sides SKU: SS-607-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o19mm-width-6mm-with-blue-nbr-seals-on-both-sides-sku-ss-607-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø 19mm width 6mm with stainless steel shields on both sides SKU: SS-607-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o-19mm-width-6mm-with-stainless-steel-shields-on-both-sides-sku-ss-607-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø17mm width 6mm with blue NBR seals on both sides SKU: SS-606-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o17mm-width-6mm-with-blue-nbr-seals-on-both-sides-sku-ss-606-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø 17mm width 6mm with stainless steel shields on both sides SKU: SS-606-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o-17mm-width-6mm-with-stainless-steel-shields-on-both-sides-sku-ss-606-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø14mm width 5mm with blue NBR seals on both sides SKU: SS-605-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o14mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-605-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø 14mm width 5mm with stainless steel shields on both sides SKU: SS-605-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o-14mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-605-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 4mm outer Ø12mm width 4mm with blue NBR seals on both sides SKU: SS-604-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-4mm-outer-o12mm-width-4mm-with-blue-nbr-seals-on-both-sides-sku-ss-604-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 4mm outer Ø 12mm width 4mm with stainless steel shields on both sides SKU: SS-604-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-4mm-outer-o-12mm-width-4mm-with-stainless-steel-shields-on-both-sides-sku-ss-604-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 45mm outer Ø 75mm width 16mm with blue NBR seals on both sides SKU: SS-6009-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-45mm-outer-o-75mm-width-16mm-with-blue-nbr-seals-on-both-sides-sku-ss-6009-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 40mm outer Ø 68mm width 15mm with blue NBR seals on both sides SKU: SS-6008-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-40mm-outer-o-68mm-width-15mm-with-blue-nbr-seals-on-both-sides-sku-ss-6008-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 62mm width 14mm with blue NBR seals on both sides SKU: SS-6007-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-62mm-width-14mm-with-blue-nbr-seals-on-both-sides-sku-ss-6007-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 62mm width 14mm with stainless steel shields on both sides SKU: SS-6007-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-62mm-width-14mm-with-stainless-steel-shields-on-both-sides-sku-ss-6007-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 55mm width 13mm with blue NBR seals on both sides SKU: SS-6006-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-55mm-width-13mm-with-blue-nbr-seals-on-both-sides-sku-ss-6006-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 55mm width 13mm with stainless steel shields on both sides SKU: SS-6006-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-55mm-width-13mm-with-stainless-steel-shields-on-both-sides-sku-ss-6006-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 47mm width 12mm with blue NBR seals on both sides SKU: SS-6005-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-47mm-width-12mm-with-blue-nbr-seals-on-both-sides-sku-ss-6005-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 47mm width 12mm with stainless steel shields on both sides SKU: SS-6005-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-47mm-width-12mm-with-stainless-steel-shields-on-both-sides-sku-ss-6005-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 42mm width 12mm with blue NBR seals on both sides SKU: SS-6004-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-42mm-width-12mm-with-blue-nbr-seals-on-both-sides-sku-ss-6004-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 42mm width 12mm with stainless steel shields on both sides SKU: SS-6004-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-42mm-width-12mm-with-stainless-steel-shields-on-both-sides-sku-ss-6004-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 35mm width 10mm with blue NBR seals on both sides SKU: SS-6003-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-35mm-width-10mm-with-blue-nbr-seals-on-both-sides-sku-ss-6003-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 17mm outer Ø 35mm width 10mm with stainless steel shields on both sides SKU: SS-6003-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-17mm-outer-o-35mm-width-10mm-with-stainless-steel-shields-on-both-sides-sku-ss-6003-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 32mm width 9mm with blue NBR seals on both sides SKU: SS-6002-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-32mm-width-9mm-with-blue-nbr-seals-on-both-sides-sku-ss-6002-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 15mm outer Ø 32mm width 9mm with stainless steel shields on both sides SKU: SS-6002-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-15mm-outer-o-32mm-width-9mm-with-stainless-steel-shields-on-both-sides-sku-ss-6002-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 28mm width 8mm with blue NBR seals on both sides SKU: SS-6001-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-28mm-width-8mm-with-blue-nbr-seals-on-both-sides-sku-ss-6001-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 28mm width 8mm with stainless steel shields on both sides SKU: SS-6001-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-28mm-width-8mm-with-stainless-steel-shields-on-both-sides-sku-ss-6001-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 26mm width 8mm with blue NBR seals on both sides SKU: SS-6000-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-26mm-width-8mm-with-blue-nbr-seals-on-both-sides-sku-ss-6000-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 26mm width 8mm with stainless steel shields on both sides SKU: SS-6000-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-26mm-width-8mm-with-stainless-steel-shields-on-both-sides-sku-ss-6000-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [Standard snap-on connectors with hose connector 13 SKU: 87041609](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-13-sku-87041609/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with hose connector 9-10 SKU: 87041607](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-9-10-sku-87041607/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with hose connector 9 SKU: 87041605](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-9-sku-87041605/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with hose connector 8 SKU: 87041603](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-8-sku-87041603/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with hose connector 6-7 SKU: 87041601](https://maedler.in/product/standard-snap-on-connectors-with-hose-connector-6-7-sku-87041601/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with external thread G 3/8 SKU: 87041338](https://maedler.in/product/standard-snap-on-connectors-with-external-thread-g-3-8-sku-87041338/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with external thread G 1/4 SKU: 87041314](https://maedler.in/product/standard-snap-on-connectors-with-external-thread-g-1-4-sku-87041314/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors with external thread G 1/2 SKU: 87041312](https://maedler.in/product/standard-snap-on-connectors-with-external-thread-g-1-2-sku-87041312/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors G 3/8 SKU: 87041138](https://maedler.in/product/standard-snap-on-connectors-g-3-8-sku-87041138/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors G 1/4 SKU: 87041114](https://maedler.in/product/standard-snap-on-connectors-g-1-4-sku-87041114/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Standard snap-on connectors G 1/2 SKU: 87041112](https://maedler.in/product/standard-snap-on-connectors-g-1-2-sku-87041112/): Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 13 SKU: 87040609](https://maedler.in/product/safety-connector-with-hose-connector-13-sku-87040609/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 9-10 SKU: 87040607](https://maedler.in/product/safety-connector-with-hose-connector-9-10-sku-87040607/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 9 SKU: 87040605](https://maedler.in/product/safety-connector-with-hose-connector-9-sku-87040605/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 8 SKU: 87040603](https://maedler.in/product/safety-connector-with-hose-connector-8-sku-87040603/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with hose connector 6-7 SKU: 87040601](https://maedler.in/product/safety-connector-with-hose-connector-6-7-sku-87040601/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with external thread G 3/8 SKU: 87040338](https://maedler.in/product/safety-connector-with-external-thread-g-3-8-sku-87040338/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with external thread G 1/4 SKU: 87040314](https://maedler.in/product/safety-connector-with-external-thread-g-1-4-sku-87040314/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector with external thread G 1/2 SKU: 87040312](https://maedler.in/product/safety-connector-with-external-thread-g-1-2-sku-87040312/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector G 3/8 SKU: 87040138](https://maedler.in/product/safety-connector-g-3-8-sku-87040138/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector G 1/4 SKU: 87040114](https://maedler.in/product/safety-connector-g-1-4-sku-87040114/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Safety connector G 1/2 SKU: 87040112](https://maedler.in/product/safety-connector-g-1-2-sku-87040112/): Safety quick-release couplings ISO 4414, DIN-Standard EN 983. Adaptor profile 7.2 German standard. The safety locking system of the safety coupling stops the dangerous „whip effect“. The novel locking system of the coupling offers optimum tightness at low coupling forces. Innovative, patented technology. Perfect performance and safety. Material: Composite material. Air-flow-Ø: 7.2/7.4 mm. Air flow: 1470 l/min ΔP: 0.6 bar. 1920 l/min ΔP: 1 bar. Adaptor profile: NW 7.2 and NW 7.4. Operating pressure: 2 to 12 bar. Max. operating pressure: 16 bar. Temperature range: -15ºC to +70ºC. - [Hosetail with hose connector ø13 for quick coupling SKU: 87035300](https://maedler.in/product/hosetail-with-hose-connector-o13-for-quick-coupling-sku-87035300/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with hose connector ø10 for quick coupling SKU: 87035000](https://maedler.in/product/hosetail-with-hose-connector-o10-for-quick-coupling-sku-87035000/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with hose connector ø9 for quick coupling SKU: 87034900](https://maedler.in/product/hosetail-with-hose-connector-o9-for-quick-coupling-sku-87034900/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with hose connector ø8 for quick coupling SKU: 87034800](https://maedler.in/product/hosetail-with-hose-connector-o8-for-quick-coupling-sku-87034800/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with hose connector ø6 for quick coupling SKU: 87034600](https://maedler.in/product/hosetail-with-hose-connector-o6-for-quick-coupling-sku-87034600/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with external thread for quick coupling G 3/8 SKU: 87033238](https://maedler.in/product/hosetail-with-external-thread-for-quick-coupling-g-3-8-sku-87033238/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with external thread for quick coupling G 1/4 SKU: 87033214](https://maedler.in/product/hosetail-with-external-thread-for-quick-coupling-g-1-4-sku-87033214/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with external thread for quick coupling G 1/2 SKU: 87033212](https://maedler.in/product/hosetail-with-external-thread-for-quick-coupling-g-1-2-sku-87033212/): Material:: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with internal thread for quick coupling G 3/8 SKU: 87033038](https://maedler.in/product/hosetail-with-internal-thread-for-quick-coupling-g-3-8-sku-87033038/): Material: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with internal thread for quick coupling G 1/4 SKU: 87033014](https://maedler.in/product/hosetail-with-internal-thread-for-quick-coupling-g-1-4-sku-87033014/): Material: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Hosetail with internal thread for quick coupling G 1/2 SKU: 87033012](https://maedler.in/product/hosetail-with-internal-thread-for-quick-coupling-g-1-2-sku-87033012/): Material: Carbonated steel, with corrosion- proof treatment. Internal diameter: 7.2 mm/7.4 mm. Operating pressure: 2 - 12 bar. Max. operating pressure: 16 bar. Precision: constant dimensions. Hardness: wear resitant. - [Nose nut mounting M22x1,5 for cylinder diameter 20/25mm SKU: 81002420](https://maedler.in/product/nose-nut-mounting-m22x15-for-cylinder-diameter-20-25mm-sku-81002420/): Materials: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Nose nut mounting M16x1,5 for cylinder diameter 12/16mm SKU: 81002412](https://maedler.in/product/nose-nut-mounting-m16x15-for-cylinder-diameter-12-16mm-sku-81002412/): Materials: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Nose nut mounting M12x1,25 for cylinder diameter 10mm SKU: 81002410](https://maedler.in/product/nose-nut-mounting-m12x125-for-cylinder-diameter-10mm-sku-81002410/): Materials: Steel, zinc-plated. Mounting element at the bearing or end cover. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø32 M6x30 SKU: 66143230](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o32-m6x30-sku-66143230/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø32 M6x20 SKU: 66143220](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o32-m6x20-sku-66143220/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob GV similar DIN 6336 Technopolymer PA6GV ø32 M6 SKU: 66143200](https://maedler.in/product/star-knob-gv-similar-din-6336-technopolymer-pa6gv-o32-m6-sku-66143200/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Bush: Steel, zinc-plated, chromated blue. Version E = with tapped blind hole d2. - [Star knob similar to DIN 6336 type E thread M16 SKU: 66138001](https://maedler.in/product/star-knob-similar-to-din-6336-type-e-thread-m16-sku-66138001/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob similar to DIN 6336 type C bore 16H7 SKU: 66138000](https://maedler.in/product/star-knob-similar-to-din-6336-type-c-bore-16h7-sku-66138000/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob similar to DIN 6336 type E thread M12 SKU: 66136301](https://maedler.in/product/star-knob-similar-to-din-6336-type-e-thread-m12-sku-66136301/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob similar to DIN 6336 type C bore 12H7 SKU: 66136300](https://maedler.in/product/star-knob-similar-to-din-6336-type-c-bore-12h7-sku-66136300/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob similar to DIN 6336 type E thread M10 SKU: 66135001](https://maedler.in/product/star-knob-similar-to-din-6336-type-e-thread-m10-sku-66135001/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob similar to DIN 6336 type C bore 10H7 SKU: 66135000](https://maedler.in/product/star-knob-similar-to-din-6336-type-c-bore-10h7-sku-66135000/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob similar to DIN 6336 type E thread M8 SKU: 66134001](https://maedler.in/product/star-knob-similar-to-din-6336-type-e-thread-m8-sku-66134001/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob similar to DIN 6336 type C bore 8H7 SKU: 66134000](https://maedler.in/product/star-knob-similar-to-din-6336-type-c-bore-8h7-sku-66134000/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob similar to DIN 6336 type E thread M6 SKU: 66133201](https://maedler.in/product/star-knob-similar-to-din-6336-type-e-thread-m6-sku-66133201/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob similar to DIN 6336 type C bore 6H7 SKU: 66133200](https://maedler.in/product/star-knob-similar-to-din-6336-type-c-bore-6h7-sku-66133200/): Material: Plastic Thermoplast (Polyamide), impact resistant, black, matt finish. Bush: Steel, zinc-plated, chromated blue. Version C: with blind hole H7. Version E: with thread (tapped blind hole). The full diameter of the contact surface is made from Steel. The protruding steel bush allows a perfect cross-pin connection. - [Star knob DIN 6336 made from cast iron type E diameter 80mm SKU: 66128000](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-e-diameter-80mm-sku-66128000/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob DIN 6336 made from cast iron type E diameter 63mm SKU: 66126300](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-e-diameter-63mm-sku-66126300/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob DIN 6336 made from cast iron type E diameter 50mm SKU: 66125000](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-e-diameter-50mm-sku-66125000/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob DIN 6336 made from cast iron type E diameter 40mm SKU: 66124000](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-e-diameter-40mm-sku-66124000/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob DIN 6336 made from cast iron type E diameter 32mm SKU: 66123200](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-e-diameter-32mm-sku-66123200/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob DIN 6336 made from cast iron type C diameter 80mm SKU: 66118000](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-c-diameter-80mm-sku-66118000/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob DIN 6336 made from cast iron type C diameter 63mm SKU: 66116300](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-c-diameter-63mm-sku-66116300/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob DIN 6336 made from cast iron type C diameter 50mm SKU: 66115000](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-c-diameter-50mm-sku-66115000/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob DIN 6336 made from cast iron type C diameter 40mm SKU: 66114000](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-c-diameter-40mm-sku-66114000/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob DIN 6336 made from cast iron type C diameter 32mm SKU: 66113200](https://maedler.in/product/star-knob-din-6336-made-from-cast-iron-type-c-diameter-32mm-sku-66113200/): Material: Grey cast iron. Version C: with blind hole H7. Version E: with thread d2 (tapped blind hole). - [Star knob screw with axial bearing thermoplastic diameter 80mm M12 x 50mm SKU: 66068002](https://maedler.in/product/star-knob-screw-with-axial-bearing-thermoplastic-diameter-80mm-m12-x-50mm-sku-66068002/): Material: Grip: Thermoplast (PA). Insert: Heat-treated steel nitrided, black oxide finish. Screw: Steel tensile strength 8.8, black oxide finish. The advantages of the axial bearing: • double clamping force with same lever size, by reducing the surface friction. • Less wear on the component due to fixed locating face. • Little settling due to higher pre-tensioning force. - [Star knob screw with axial bearing thermoplastic diameter 80mm M12 x 30mm SKU: 66068001](https://maedler.in/product/star-knob-screw-with-axial-bearing-thermoplastic-diameter-80mm-m12-x-30mm-sku-66068001/): Material: Grip: Thermoplast (PA). Insert: Heat-treated steel nitrided, black oxide finish. Screw: Steel tensile strength 8.8, black oxide finish. The advantages of the axial bearing: • double clamping force with same lever size, by reducing the surface friction. • Less wear on the component due to fixed locating face. • Little settling due to higher pre-tensioning force. - [Star knob with axial bearing made from thermoplastic diameter 80mm SKU: 66068000](https://maedler.in/product/star-knob-with-axial-bearing-made-from-thermoplastic-diameter-80mm-sku-66068000/): Material: Grip: Thermoplast (PA) Insert: Heat-treated steel nitrided, black oxide finish. The advantages of the axial bearing: -double clamping force with same lever size, by reducing the surface friction. -Less wear on the component due to fixed locating face -Little settling due to higher pre-tensioning force of the bolt or thread. - [Star knob screw with axial bearing thermoplastic diameter 63mm M10 x 40mm SKU: 66066302](https://maedler.in/product/star-knob-screw-with-axial-bearing-thermoplastic-diameter-63mm-m10-x-40mm-sku-66066302/): Material: Grip: Thermoplast (PA). Insert: Heat-treated steel nitrided, black oxide finish. Screw: Steel tensile strength 8.8, black oxide finish. The advantages of the axial bearing: • double clamping force with same lever size, by reducing the surface friction. • Less wear on the component due to fixed locating face. • Little settling due to higher pre-tensioning force. - [Star knob screw with axial bearing thermoplastic diameter 63mm M10 x 30mm SKU: 66066301](https://maedler.in/product/star-knob-screw-with-axial-bearing-thermoplastic-diameter-63mm-m10-x-30mm-sku-66066301/): Material: Grip: Thermoplast (PA). Insert: Heat-treated steel nitrided, black oxide finish. Screw: Steel tensile strength 8.8, black oxide finish. The advantages of the axial bearing: • double clamping force with same lever size, by reducing the surface friction. • Less wear on the component due to fixed locating face. • Little settling due to higher pre-tensioning force. - [Star knob with axial bearing made from thermoplastic diameter 63 SKU: 66066300](https://maedler.in/product/star-knob-with-axial-bearing-made-from-thermoplastic-diameter-63-sku-66066300/): Material: Grip: Thermoplast (PA) Insert: Heat-treated steel nitrided, black oxide finish. The advantages of the axial bearing: -double clamping force with same lever size, by reducing the surface friction. -Less wear on the component due to fixed locating face -Little settling due to higher pre-tensioning force of the bolt or thread. - [Star knob screw with axial bearing thermoplastic diameter 50mm M8 x 35mm SKU: 66065002](https://maedler.in/product/star-knob-screw-with-axial-bearing-thermoplastic-diameter-50mm-m8-x-35mm-sku-66065002/): Material: Grip: Thermoplast (PA). Insert: Heat-treated steel nitrided, black oxide finish. Screw: Steel tensile strength 8.8, black oxide finish. The advantages of the axial bearing: • double clamping force with same lever size, by reducing the surface friction. • Less wear on the component due to fixed locating face. • Little settling due to higher pre-tensioning force. - [Star knob screw with axial bearing thermoplastic diameter 50mm M8 x 20mm SKU: 66065001](https://maedler.in/product/star-knob-screw-with-axial-bearing-thermoplastic-diameter-50mm-m8-x-20mm-sku-66065001/): Material: Grip: Thermoplast (PA). Insert: Heat-treated steel nitrided, black oxide finish. Screw: Steel tensile strength 8.8, black oxide finish. The advantages of the axial bearing: • double clamping force with same lever size, by reducing the surface friction. • Less wear on the component due to fixed locating face. • Little settling due to higher pre-tensioning force. - [Star knob with axial bearing made from thermoplastic diameter 50mm SKU: 66065000](https://maedler.in/product/star-knob-with-axial-bearing-made-from-thermoplastic-diameter-50mm-sku-66065000/): Material: Grip: Thermoplast (PA) Insert: Heat-treated steel nitrided, black oxide finish. The advantages of the axial bearing: -double clamping force with same lever size, by reducing the surface friction. -Less wear on the component due to fixed locating face -Little settling due to higher pre-tensioning force of the bolt or thread. - [Star knob screw with axial bearing thermoplastic diameter 40mm M6 x 25mm SKU: 66064002](https://maedler.in/product/star-knob-screw-with-axial-bearing-thermoplastic-diameter-40mm-m6-x-25mm-sku-66064002/): Material: Grip: Thermoplast (PA). Insert: Heat-treated steel nitrided, black oxide finish. Screw: Steel tensile strength 8.8, black oxide finish. The advantages of the axial bearing: • double clamping force with same lever size, by reducing the surface friction. • Less wear on the component due to fixed locating face. • Little settling due to higher pre-tensioning force. - [Star knob screw with axial bearing thermoplastic diameter 40mm M6 x 15mm SKU: 66064001](https://maedler.in/product/star-knob-screw-with-axial-bearing-thermoplastic-diameter-40mm-m6-x-15mm-sku-66064001/): Material: Grip: Thermoplast (PA). Insert: Heat-treated steel nitrided, black oxide finish. Screw: Steel tensile strength 8.8, black oxide finish. The advantages of the axial bearing: • double clamping force with same lever size, by reducing the surface friction. • Less wear on the component due to fixed locating face. • Little settling due to higher pre-tensioning force. - [Star knob with axial bearing made from thermoplastic diameter 40mm SKU: 66064000](https://maedler.in/product/star-knob-with-axial-bearing-made-from-thermoplastic-diameter-40mm-sku-66064000/): Material: Grip: Thermoplast (PA) Insert: Heat-treated steel nitrided, black oxide finish. The advantages of the axial bearing: -double clamping force with same lever size, by reducing the surface friction. -Less wear on the component due to fixed locating face -Little settling due to higher pre-tensioning force of the bolt or thread. - [Star knob similar to DIN 6335 made from plastic type K diameter 80mm SKU: 66058000](https://maedler.in/product/star-knob-similar-to-din-6335-made-from-plastic-type-k-diameter-80mm-sku-66058000/): Material: Plastic PF31, black, glossy finish Type K = with press-fitted threaded bush made from brass. - [Star knob similar to DIN 6335 made from plastic type K diameter 63mm SKU: 66056300](https://maedler.in/product/star-knob-similar-to-din-6335-made-from-plastic-type-k-diameter-63mm-sku-66056300/): Material: Plastic PF31, black, glossy finish Type K = with press-fitted threaded bush made from brass. - [Star knob similar to DIN 6335 made from plastic type K diameter 50mm SKU: 66055000](https://maedler.in/product/star-knob-similar-to-din-6335-made-from-plastic-type-k-diameter-50mm-sku-66055000/): Material: Plastic PF31, black, glossy finish Type K = with press-fitted threaded bush made from brass. - [Star knob similar to DIN 6335 made from plastic type K diameter 40mm SKU: 66054000](https://maedler.in/product/star-knob-similar-to-din-6335-made-from-plastic-type-k-diameter-40mm-sku-66054000/): Material: Plastic PF31, black, glossy finish Type K = with press-fitted threaded bush made from brass. - [Star knob similar to DIN 6335 made from plastic type K diameter 32mm SKU: 66053200](https://maedler.in/product/star-knob-similar-to-din-6335-made-from-plastic-type-k-diameter-32mm-sku-66053200/): Material: Plastic PF31, black, glossy finish Type K = with press-fitted threaded bush made from brass. - [Star knob similar to DIN 6335 made from plastic type K diameter 25mm SKU: 66052500](https://maedler.in/product/star-knob-similar-to-din-6335-made-from-plastic-type-k-diameter-25mm-sku-66052500/): Material: Plastic PF31, black, glossy finish Type K = with press-fitted threaded bush made from brass. - [Star knob similar to DIN 6335 made from plastic type K diameter 20mm SKU: 66052000](https://maedler.in/product/star-knob-similar-to-din-6335-made-from-plastic-type-k-diameter-20mm-sku-66052000/): Material: Plastic PF31, black, glossy finish Type K = with press-fitted threaded bush made from brass. - [Star knob DIN 6335 made from cast iron type E diameter 100mm SKU: 66029800](https://maedler.in/product/star-knob-din-6335-made-from-cast-iron-type-e-diameter-100mm-sku-66029800/): Material: Grey cast iron. Type E = with tapped blind hole. - [Star knob DIN 6335 made from cast iron type E diameter 80mm SKU: 66028000](https://maedler.in/product/star-knob-din-6335-made-from-cast-iron-type-e-diameter-80mm-sku-66028000/): Material: Grey cast iron. Type E = with tapped blind hole. - [Star knob DIN 6335 made from cast iron type E diameter 63mm SKU: 66026300](https://maedler.in/product/star-knob-din-6335-made-from-cast-iron-type-e-diameter-63mm-sku-66026300/): Material: Grey cast iron. Type E = with tapped blind hole. - [Star knob DIN 6335 made from cast iron type E diameter 50mm SKU: 66025000](https://maedler.in/product/star-knob-din-6335-made-from-cast-iron-type-e-diameter-50mm-sku-66025000/): Material: Grey cast iron. Type E = with tapped blind hole. - [Star knob DIN 6335 made from cast iron type E diameter 40mm SKU: 66024000](https://maedler.in/product/star-knob-din-6335-made-from-cast-iron-type-e-diameter-40mm-sku-66024000/): Material: Grey cast iron. Type E = with tapped blind hole. - [Star knob DIN 6335 made from cast iron type E diameter 32mm SKU: 66023200](https://maedler.in/product/star-knob-din-6335-made-from-cast-iron-type-e-diameter-32mm-sku-66023200/): Material: Grey cast iron. Type E = with tapped blind hole. - [Conical seat DIN 6319 form G diameter 68mm for bolt diameter 30mm 1.4401 SKU: 65599680](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-68mm-for-bolt-diameter-30mm-1-4401-sku-65599680/): Material: 1.4401 (AISI 316). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 60mm for bolt diameter 24mm 1.4401 SKU: 65599674](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-60mm-for-bolt-diameter-24mm-1-4401-sku-65599674/): Material: 1.4401 (AISI 316). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 50mm for bolt diameter 20mm 1.4401 SKU: 65599670](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-50mm-for-bolt-diameter-20mm-1-4401-sku-65599670/): Material: 1.4401 (AISI 316). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 44mm for bolt diameter 16mm 1.4401 SKU: 65599666](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-44mm-for-bolt-diameter-16mm-1-4401-sku-65599666/): Material: 1.4401 (AISI 316). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 40mm for bolt diameter 14mm 1.4401 SKU: 65599664](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-40mm-for-bolt-diameter-14mm-1-4401-sku-65599664/): Material: 1.4401 (AISI 316). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 36mm for bolt diameter 12mm 1.4401 SKU: 65599662](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-36mm-for-bolt-diameter-12mm-1-4401-sku-65599662/): Material: 1.4401 (AISI 316). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 30mm for bolt diameter 10mm 1.4401 SKU: 65599660](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-30mm-for-bolt-diameter-10mm-1-4401-sku-65599660/): Material: 1.4401 (AISI 316). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 24mm for bolt diameter 8mm 1.4401 SKU: 65599658](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-24mm-for-bolt-diameter-8mm-1-4401-sku-65599658/): Material: 1.4401 (AISI 316). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 17mm for bolt diameter 6mm 1.4401 SKU: 65599656](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-17mm-for-bolt-diameter-6mm-1-4401-sku-65599656/): Material: 1.4401 (AISI 316). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 68mm for bolt diameter 30mm 1.4301 SKU: 65599630](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-68mm-for-bolt-diameter-30mm-1-4301-sku-65599630/): Material: 1.4301 (AISI 304). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 60mm for bolt diameter 24mm 1.4301 SKU: 65599624](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-60mm-for-bolt-diameter-24mm-1-4301-sku-65599624/): Material: 1.4301 (AISI 304). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 50mm for bolt diameter 20mm 1.4301 SKU: 65599620](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-50mm-for-bolt-diameter-20mm-1-4301-sku-65599620/): Material: 1.4301 (AISI 304). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 44mm for bolt diameter 16mm 1.4301 SKU: 65599616](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-44mm-for-bolt-diameter-16mm-1-4301-sku-65599616/): Material: 1.4301 (AISI 304). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 40mm for bolt diameter 14mm 1.4301 SKU: 65599614](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-40mm-for-bolt-diameter-14mm-1-4301-sku-65599614/): Material: 1.4301 (AISI 304). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 36mm for bolt diameter 12mm 1.4301 SKU: 65599612](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-36mm-for-bolt-diameter-12mm-1-4301-sku-65599612/): Material: 1.4301 (AISI 304). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 30mm for bolt diameter 10mm 1.4301 SKU: 65599610](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-30mm-for-bolt-diameter-10mm-1-4301-sku-65599610/): Material: 1.4301 (AISI 304). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 24mm for bolt diameter 8mm 1.4301 SKU: 65599608](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-24mm-for-bolt-diameter-8mm-1-4301-sku-65599608/): Material: 1.4301 (AISI 304). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN 6319 form G diameter 17mm for bolt diameter 6mm 1.4301 SKU: 65599606](https://maedler.in/product/conical-seat-din-6319-form-g-diameter-17mm-for-bolt-diameter-6mm-1-4301-sku-65599606/): Material: 1.4301 (AISI 304). Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes. * Total height, together with spherical washer. ** Max. statical load. - [Conical seat DIN6319 form D inner Ø 56mm outerØ 92mm for bolt diameter48mm stainless steel 1.4401 / AISI316 SKU: 65599598](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-56mm-outero-92mm-for-bolt-diameter48mm-stainless-steel-1-4401-aisi316-sku-65599598/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 49mm outerØ 78mm for bolt diameter42mm stainless steel 1.4401 / AISI316 SKU: 65599592](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-49mm-outero-78mm-for-bolt-diameter42mm-stainless-steel-1-4401-aisi316-sku-65599592/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 42mm outerØ 68mm for bolt diameter36mm stainless steel 1.4401 / AISI316 SKU: 65599586](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-42mm-outero-68mm-for-bolt-diameter36mm-stainless-steel-1-4401-aisi316-sku-65599586/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 35mm outerØ 56mm for bolt diameter30mm stainless steel 1.4401 / AISI316 SKU: 65599580](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-35mm-outero-56mm-for-bolt-diameter30mm-stainless-steel-1-4401-aisi316-sku-65599580/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 28mm outerØ 44mm for bolt diameter24mm stainless steel 1.4401 / AISI316 SKU: 65599574](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-28mm-outero-44mm-for-bolt-diameter24mm-stainless-steel-1-4401-aisi316-sku-65599574/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 23,2mm outerØ 36mm for bolt diameter20mm stainless steel 1.4401 / AISI316 SKU: 65599570](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-232mm-outero-36mm-for-bolt-diameter20mm-stainless-steel-1-4401-aisi316-sku-65599570/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 19mm outerØ 30mm for bolt diameter16mm stainless steel 1.4401 / AISI316 SKU: 65599566](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-19mm-outero-30mm-for-bolt-diameter16mm-stainless-steel-1-4401-aisi316-sku-65599566/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 16,5mm outerØ 28mm for bolt diameter 14mm stainless steel 1.4401 / AISI316 SKU: 65599564](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-165mm-outero-28mm-for-bolt-diameter-14mm-stainless-steel-1-4401-aisi316-sku-65599564/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 14,2mm outerØ 24mm for bolt diameter12mm stainless steel 1.4401 / AISI316 SKU: 65599562](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-142mm-outero-24mm-for-bolt-diameter12mm-stainless-steel-1-4401-aisi316-sku-65599562/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 12mm outerØ 21mm for bolt diameter10mm stainless steel 1.4401 / AISI316 SKU: 65599560](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-12mm-outero-21mm-for-bolt-diameter10mm-stainless-steel-1-4401-aisi316-sku-65599560/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 9,6mm outerØ 17mm for bolt diameter8mm stainless steel 1.4401 / AISI316 SKU: 65599558](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-96mm-outero-17mm-for-bolt-diameter8mm-stainless-steel-1-4401-aisi316-sku-65599558/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN6319 form D inner Ø 7,1mm outerØ 12mm for bolt diameter6mm stainless steel 1.4401 / AISI316 SKU: 65599556](https://maedler.in/product/conical-seat-din6319-form-d-inner-o-71mm-outero-12mm-for-bolt-diameter6mm-stainless-steel-1-4401-aisi316-sku-65599556/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat similar DIN6319 form D inner Ø 6mm outerØ 10,5mm for bolt diameter 5mm stainless steel 1.4401 / AISI316 SKU: 65599555](https://maedler.in/product/conical-seat-similar-din6319-form-d-inner-o-6mm-outero-105mm-for-bolt-diameter-5mm-stainless-steel-1-4401-aisi316-sku-65599555/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 92mm stainless steel 1.4301 SKU: 65599548](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-92mm-stainless-steel-1-4301-sku-65599548/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 78mm stainless steel 1.4301 SKU: 65599542](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-78mm-stainless-steel-1-4301-sku-65599542/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 68mm stainless steel 1.4301 SKU: 65599536](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-68mm-stainless-steel-1-4301-sku-65599536/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 56mm stainless steel 1.4301 SKU: 65599530](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-56mm-stainless-steel-1-4301-sku-65599530/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 44mm stainless steel 1.4301 SKU: 65599524](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-44mm-stainless-steel-1-4301-sku-65599524/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 36mm stainless steel 1.4301 SKU: 65599520](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-36mm-stainless-steel-1-4301-sku-65599520/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 30mm stainless steel 1.4301 SKU: 65599516](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-30mm-stainless-steel-1-4301-sku-65599516/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 28mm stainless steel 1.4301 SKU: 65599514](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-28mm-stainless-steel-1-4301-sku-65599514/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 24mm stainless steel 1.4301 SKU: 65599512](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-24mm-stainless-steel-1-4301-sku-65599512/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 21mm stainless steel 1.4301 SKU: 65599510](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-21mm-stainless-steel-1-4301-sku-65599510/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 17mm stainless steel 1.4301 SKU: 65599508](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-17mm-stainless-steel-1-4301-sku-65599508/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat DIN 6319 form D outer diameter 12mm stainless steel 1.4301 SKU: 65599506](https://maedler.in/product/conical-seat-din-6319-form-d-outer-diameter-12mm-stainless-steel-1-4301-sku-65599506/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Conical seat similar DIN 6319 form D outer diameter 10,5mm stainless steel 1.4301 SKU: 65599505](https://maedler.in/product/conical-seat-similar-din-6319-form-d-outer-diameter-105mm-stainless-steel-1-4301-sku-65599505/): Material: 1.4301 (AISI 304).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 50mm outerØ 92mm for bolt diameter48mm stainless steel 1.4401 / AISI316 SKU: 65599498](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-50mm-outero-92mm-for-bolt-diameter48mm-stainless-steel-1-4401-aisi316-sku-65599498/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 43mm outerØ 78mm for bolt diameter42mm stainless steel 1.4401 / AISI316 SKU: 65599492](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-43mm-outero-78mm-for-bolt-diameter42mm-stainless-steel-1-4401-aisi316-sku-65599492/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 37mm outerØ 68mm for bolt diameter 36mm stainless steel 1.4401 / AISI316 SKU: 65599486](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-37mm-outero-68mm-for-bolt-diameter-36mm-stainless-steel-1-4401-aisi316-sku-65599486/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 31mm outerØ 56mm for bolt diameter30mm stainless steel 1.4401 / AISI316 SKU: 65599480](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-31mm-outero-56mm-for-bolt-diameter30mm-stainless-steel-1-4401-aisi316-sku-65599480/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 25mm outerØ 44mm for bolt diameter24mm stainless steel 1.4401 / AISI316 SKU: 65599474](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-25mm-outero-44mm-for-bolt-diameter24mm-stainless-steel-1-4401-aisi316-sku-65599474/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 21mm outerØ 36mm for bolt diameter20mm stainless steel 1.4401 / AISI316 SKU: 65599470](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-21mm-outero-36mm-for-bolt-diameter20mm-stainless-steel-1-4401-aisi316-sku-65599470/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 17mm outerØ 30mm for bolt diameter16mm stainless steel 1.4401 / AISI316 SKU: 65599466](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-17mm-outero-30mm-for-bolt-diameter16mm-stainless-steel-1-4401-aisi316-sku-65599466/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Spherical washer DIN6319 form C inner Ø 15mm outerØ 28mm for bolt diameter12mm stainless steel 1.4401 / AISI316 SKU: 65599464](https://maedler.in/product/spherical-washer-din6319-form-c-inner-o-15mm-outero-28mm-for-bolt-diameter12mm-stainless-steel-1-4401-aisi316-sku-65599464/): Material: 1.4401 (AISI 316).Spherical washers DIN 6319 type C are mostly used with conical seats DIN 6319 type D, for screw fittings at non-parallel faces. Conical seats DIN 6319 type G, with larger outside diameter and height, should be used at relatively big holes or slot holes.* Total height, together with spherical washer.** Max. statical load. - [Roller chain similar to 16 B-1 pitch 1"x17.02mm material stainless steel 1.4301 SKU: 10899000](https://maedler.in/product/roller-chain-similar-to-16-b-1-pitch-1x17-02mm-material-stainless-steel-1-4301-sku-10899000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 16 B-1 SKU: 10877000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-16-b-1-sku-10877000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Self-lubrication roller chain similar to 16 B-1 SLR pitch 1"x17.02mm SKU: 10877000](https://maedler.in/product/self-lubrication-roller-chain-similar-to-16-b-1-slr-pitch-1x17-02mm-sku-10877000/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel, sintered bronze bushes. Self-lubricating single-strand roller chain, dimensions and pre-stretching according to DIN. Waisted link plates. Chains with an uneven number of links are supplied with inner links at both ends. Only for horizontal usage (rollers not vertically). Connecting links must be ordered separately. Temperature range: -10° to +120°C. - [Anti corrosion roller chain Neptune 16 B-1 SKU: 10866000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-16-b-1-sku-10866000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 16 B-1 NP pitch 1"x17.02mm nickel-plated SKU: 10866000](https://maedler.in/product/roller-chain-similar-to-16-b-1-np-pitch-1x17-02mm-nickel-plated-sku-10866000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 16B-1 plastic with stainless steel SKU: 10856000](https://maedler.in/product/chain-ke-eco-similar-to-16b-1-plastic-with-stainless-steel-sku-10856000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain Titan 16 B-1 SKU: 10800000T](https://maedler.in/product/roller-chain-titan-16-b-1-sku-10800000t/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. Premium simplex roller chains, developed for low wear, even under dusty environment. Seamless bushes with lube grooves. Specially hard, low friction pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +60°C. Other temperatures are possible if special grease is used. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain DIN ISO 606 16 B-1-GLH pitch 1"x17,02mm with straight plates high version SKU: 10800000GLH](https://maedler.in/product/roller-chain-din-iso-606-16-b-1-glh-pitch-1x1702mm-with-straight-plates-high-version-sku-10800000glh/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain DIN ISO 606 16 B-1-GL pitch 1"x17,02mm with straight plates SKU: 10800000GL](https://maedler.in/product/roller-chain-din-iso-606-16-b-1-gl-pitch-1x1702mm-with-straight-plates-sku-10800000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 16 B-1 pitch 1"x17.02mm SKU: 10800000](https://maedler.in/product/roller-chain-16-b-1-pitch-1x17-02mm-sku-10800000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 12 B-1 pitch 3/4x7/16" SKU: 10799003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-12-b-1-pitch-3-4x7-16-sku-10799003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 12 B-1 SKU: 10799000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-12-b-1-sku-10799000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 12 B-1 pitch 3/4x7/16" material stainless steel 1.4301 with straight plates SKU: 10799000GL](https://maedler.in/product/roller-chain-similar-to-12-b-1-pitch-3-4x7-16-material-stainless-steel-1-4301-with-straight-plates-sku-10799000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Roller chain similar to 12 B-1 pitch 3/4x7/16" material stainless steel 1.4301 SKU: 10799000](https://maedler.in/product/roller-chain-similar-to-12-b-1-pitch-3-4x7-16-material-stainless-steel-1-4301-sku-10799000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 12 B-1 SKU: 10777000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-12-b-1-sku-10777000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Self-lubrication roller chain similar to 12 B-1 SLR pitch 3/4x7/16" SKU: 10777000](https://maedler.in/product/self-lubrication-roller-chain-similar-to-12-b-1-slr-pitch-3-4x7-16-sku-10777000/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel, sintered bronze bushes. Self-lubricating single-strand roller chain, dimensions and pre-stretching according to DIN. Waisted link plates. Chains with an uneven number of links are supplied with inner links at both ends. Only for horizontal usage (rollers not vertically). Connecting links must be ordered separately. Temperature range: -10° to +120°C. - [Anti corrosion roller chain Neptune 12 B-1 SKU: 10766000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-12-b-1-sku-10766000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 12 B-1 NP pitch 3/4x7/16" nickel-plated SKU: 10766000](https://maedler.in/product/roller-chain-similar-to-12-b-1-np-pitch-3-4x7-16-nickel-plated-sku-10766000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 12B-1 plastic with stainless steel SKU: 10756000](https://maedler.in/product/chain-ke-eco-similar-to-12b-1-plastic-with-stainless-steel-sku-10756000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Chain KE similar to 12B-1 plastic with stainless steel SKU: 10755000](https://maedler.in/product/chain-ke-similar-to-12b-1-plastic-with-stainless-steel-sku-10755000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain DIN ISO 606 12 B-1-GL pitch 3/4x7/16" with straight plates SKU: 10700000GL](https://maedler.in/product/roller-chain-din-iso-606-12-b-1-gl-pitch-3-4x7-16-with-straight-plates-sku-10700000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 12 B-1 pitch 3/4x7/16" SKU: 10700000](https://maedler.in/product/roller-chain-12-b-1-pitch-3-4x7-16-sku-10700000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 10 B-1 pitch 5/8x3/8" SKU: 10699003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-10-b-1-pitch-5-8x3-8-sku-10699003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 10 B-1 SKU: 10699000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-10-b-1-sku-10699000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 10 B-1 pitch 5/8x3/8" material stainless steel 1.4301 with straight plates SKU: 10699000GL](https://maedler.in/product/roller-chain-similar-to-10-b-1-pitch-5-8x3-8-material-stainless-steel-1-4301-with-straight-plates-sku-10699000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Roller chain similar to 10 B-1 pitch 5/8x3/8" material stainless steel 1.4301 SKU: 10699000](https://maedler.in/product/roller-chain-similar-to-10-b-1-pitch-5-8x3-8-material-stainless-steel-1-4301-sku-10699000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 10 B-1 SKU: 10677000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-10-b-1-sku-10677000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Self-lubrication roller chain similar to 10 B-1 SLR pitch 5/8x3/8" SKU: 10677000](https://maedler.in/product/self-lubrication-roller-chain-similar-to-10-b-1-slr-pitch-5-8x3-8-sku-10677000/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel, sintered bronze bushes. Self-lubricating single-strand roller chain, dimensions and pre-stretching according to DIN. Waisted link plates. Chains with an uneven number of links are supplied with inner links at both ends. Only for horizontal usage (rollers not vertically). Connecting links must be ordered separately. Temperature range: -10° to +120°C. - [Anti corrosion roller chain Neptune 10 B-1 SKU: 10666000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-10-b-1-sku-10666000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 10 B-1 NP pitch 5/8x3/8" nickel-plated SKU: 10666000](https://maedler.in/product/roller-chain-similar-to-10-b-1-np-pitch-5-8x3-8-nickel-plated-sku-10666000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 10B-1 plastic with stainless steel SKU: 10656000](https://maedler.in/product/chain-ke-eco-similar-to-10b-1-plastic-with-stainless-steel-sku-10656000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Chain KE similar to 10B-1 plastic with stainless steel SKU: 10655000](https://maedler.in/product/chain-ke-similar-to-10b-1-plastic-with-stainless-steel-sku-10655000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain DIN ISO 606 10 B-1-GL pitch 5/8x3/8" with straight plates SKU: 10600000GL](https://maedler.in/product/roller-chain-din-iso-606-10-b-1-gl-pitch-5-8x3-8-with-straight-plates-sku-10600000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 10 B-1 pitch 5/8x3/8" SKU: 10600000](https://maedler.in/product/roller-chain-10-b-1-pitch-5-8x3-8-sku-10600000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 08 B-1 pitch 1/2x5/16" SKU: 10599003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-08-b-1-pitch-1-2x5-16-sku-10599003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 08 B-1 SKU: 10599000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-08-b-1-sku-10599000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 08 B-1 pitch 1/2x5/16" material stainless steel 1.4301 with straight plates SKU: 10599000GL](https://maedler.in/product/roller-chain-similar-to-08-b-1-pitch-1-2x5-16-material-stainless-steel-1-4301-with-straight-plates-sku-10599000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Roller chain similar to 08 B-1 pitch 1/2x5/16" material stainless steel 1.4301 SKU: 10599000](https://maedler.in/product/roller-chain-similar-to-08-b-1-pitch-1-2x5-16-material-stainless-steel-1-4301-sku-10599000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 08 B-1 SKU: 10577000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-08-b-1-sku-10577000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Self-lubrication roller chain similar to 08 B-1 SLR pitch 1/2x5/16" SKU: 10577000](https://maedler.in/product/self-lubrication-roller-chain-similar-to-08-b-1-slr-pitch-1-2x5-16-sku-10577000/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel, sintered bronze bushes. Self-lubricating single-strand roller chain, dimensions and pre-stretching according to DIN. Waisted link plates. Chains with an uneven number of links are supplied with inner links at both ends. Only for horizontal usage (rollers not vertically). Connecting links must be ordered separately. Temperature range: -10° to +120°C. - [Anti corrosion roller chain Neptune 08 B-1 SKU: 10566000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-08-b-1-sku-10566000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 08 B-1 pitch 1/2 x 5/16"  nickel-plated. SKU: 10566000](https://maedler.in/product/roller-chain-similar-to-08-b-1-pitch-1-2-x-5-16-nickel-plated-sku-10566000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 08 B-1 plastic with stainless steel SKU: 10556000](https://maedler.in/product/chain-ke-eco-similar-to-08-b-1-plastic-with-stainless-steel-sku-10556000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Chain KE similar to 08 B-1 plastic with stainless steel SKU: 10555000](https://maedler.in/product/chain-ke-similar-to-08-b-1-plastic-with-stainless-steel-sku-10555000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain DIN ISO 606 08 B-1-GL pitch 1/2x5/16" with straight plates SKU: 10500000GL](https://maedler.in/product/roller-chain-din-iso-606-08-b-1-gl-pitch-1-2x5-16-with-straight-plates-sku-10500000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 08 B-1 pitch 1/2x5/16" SKU: 10500000](https://maedler.in/product/roller-chain-08-b-1-pitch-1-2x5-16-sku-10500000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain similar to 083 pitch 1/2x3/16" material stainless steel 1.4301 SKU: 10399000](https://maedler.in/product/roller-chain-similar-to-083-pitch-1-2x3-16-material-stainless-steel-1-4301-sku-10399000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Roller chain company norm pitch 1/2x3/16" V SKU: 10340000](https://maedler.in/product/roller-chain-company-norm-pitch-1-2x3-16-v-sku-10340000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain 083 pitch 1/2x3/16" SKU: 10300000](https://maedler.in/product/roller-chain-083-pitch-1-2x3-16-sku-10300000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain 081 pitch 1/2x1/8" SKU: 10200000](https://maedler.in/product/roller-chain-081-pitch-1-2x1-8-sku-10200000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 06 B-1 pitch 3/8x7/32" SKU: 10199003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-06-b-1-pitch-3-8x7-32-sku-10199003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 06 B-1 SKU: 10199000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-06-b-1-sku-10199000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 06 B-1 pitch 3/8x7/32" material stainless steel 1.4301 SKU: 10199000](https://maedler.in/product/roller-chain-similar-to-06-b-1-pitch-3-8x7-32-material-stainless-steel-1-4301-sku-10199000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 06 B-1 SKU: 10177000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-06-b-1-sku-10177000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Anti corrosion roller chain Neptune 06 B-1 SKU: 10166000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-06-b-1-sku-10166000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 06 B-1 NP pitch 3/8x7/32" nickel-plated SKU: 10166000](https://maedler.in/product/roller-chain-similar-to-06-b-1-np-pitch-3-8x7-32-nickel-plated-sku-10166000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Chain KE-Eco similar to 06B-1 plastic with stainless steel SKU: 10156000](https://maedler.in/product/chain-ke-eco-similar-to-06b-1-plastic-with-stainless-steel-sku-10156000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Chain KE similar to 06B-1 plastic with stainless steel SKU: 10155000](https://maedler.in/product/chain-ke-similar-to-06b-1-plastic-with-stainless-steel-sku-10155000/): Similar to DIN ISO 606 (ex DIN 8187).Material and type:Type KE: Premium chain from Tsubaki (tyke PC). Inner links made from special polycarbonate with high chemical resistance, for food industry or labority.Type KE-Eco: Similar to KE, but inner links from POM, polycarbonate, with lower chemical resistance.Outer links from stainless steel 1.4301 (AISI 304).Main dimensions according to DIN.Very light and silent running.Very clean due to closed surfaces on the inner link.High corrosion resistance.Long lifetime, without any lubrication.Breaking load significantly higher than pure plastic chains.Temperature range -10°C to +80°C.Vmax 70m/min.Sold by meter. Connecting links have to be ordered seperately. - [Roller chain 06 B-1 pitch 3/8x7/32" SKU: 10100000](https://maedler.in/product/roller-chain-06-b-1-pitch-3-8x7-32-sku-10100000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain 05 B-1 pitch 8mm material stainless steel 1.4301 SKU: 10099800](https://maedler.in/product/roller-chain-05-b-1-pitch-8mm-material-stainless-steel-1-4301-sku-10099800/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Roller chain no. 04 pitch 6mm material stainless steel 1.4301 SKU: 10099600](https://maedler.in/product/roller-chain-no-04-pitch-6mm-material-stainless-steel-1-4301-sku-10099600/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Roller chain 05 B-1 pitch 8mm SKU: 10080000](https://maedler.in/product/roller-chain-05-b-1-pitch-8mm-sku-10080000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain similar to 05 B-1 NP pitch 8mm nickel-plated SKU: 10066800](https://maedler.in/product/roller-chain-similar-to-05-b-1-np-pitch-8mm-nickel-plated-sku-10066800/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain no. 04 pitch 6mm SKU: 10060000](https://maedler.in/product/roller-chain-no-04-pitch-6mm-sku-10060000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain no. 03 pitch 5mm SKU: 10030000](https://maedler.in/product/roller-chain-no-03-pitch-5mm-sku-10030000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain company standard pitch 4mm SKU: 10000000](https://maedler.in/product/chain-company-standard-pitch-4mm-sku-10000000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø19mm width 6mm with blue NBR seals on both sides SKU: SS-698-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o19mm-width-6mm-with-blue-nbr-seals-on-both-sides-sku-ss-698-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø 19mm width 6mm with stainless steel shields on both sides SKU: SS-698-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o-19mm-width-6mm-with-stainless-steel-shields-on-both-sides-sku-ss-698-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø15mm width 5mm with blue NBR seals on both sides SKU: SS-696-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o15mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-696-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø 15mm width 5mm with stainless steel shields on both sides SKU: SS-696-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o-15mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-696-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø16mm width 5mm with blue NBR seals on both sides SKU: SS-688-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o16mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-688-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 8mm outer Ø 16mm width 5mm with stainless steel shields on both sides SKU: SS-688-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-8mm-outer-o-16mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-688-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø14mm width 5mm with blue NBR seals on both sides SKU: SS-687-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o14mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-687-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø 14mm width 5mm with stainless steel shields on both sides SKU: SS-687-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o-14mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-687-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø13mm width 5mm with blue NBR seals on both sides SKU: SS-686-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o13mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-686-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø 13mm width 5mm with stainless steel shields on both sides SKU: SS-686-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o-13mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-686-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø11mm width 5mm with blue NBR seals on both sides SKU: SS-685-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o11mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-685-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø 11mm width 5mm with stainless steel shields on both sides SKU: SS-685-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o-11mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-685-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 62mm width 17mm with blue NBR seals on both sides SKU: SS-6305-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-62mm-width-17mm-with-blue-nbr-seals-on-both-sides-sku-ss-6305-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 20mm outer Ø 52mm width 15mm with blue NBR seals on both sides SKU: SS-6304-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-20mm-outer-o-52mm-width-15mm-with-blue-nbr-seals-on-both-sides-sku-ss-6304-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 12mm outer Ø 37mm width 12mm with blue NBR seals on both sides SKU: SS-6301-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-12mm-outer-o-37mm-width-12mm-with-blue-nbr-seals-on-both-sides-sku-ss-6301-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 10mm outer Ø 35mm width 11mm with blue NBR seals on both sides SKU: SS-6300-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-10mm-outer-o-35mm-width-11mm-with-blue-nbr-seals-on-both-sides-sku-ss-6300-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 9mm outer Ø26mm width 8mm with blue NBR seals on both sides SKU: SS-629-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-9mm-outer-o26mm-width-8mm-with-blue-nbr-seals-on-both-sides-sku-ss-629-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 9mm outer Ø 26mm width 8mm with stainless steel shields on both sides SKU: SS-629-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-9mm-outer-o-26mm-width-8mm-with-stainless-steel-shields-on-both-sides-sku-ss-629-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø22mm width 7mm with blue NBR seals on both sides SKU: SS-627-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o22mm-width-7mm-with-blue-nbr-seals-on-both-sides-sku-ss-627-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 7mm outer Ø 22mm width 7mm with stainless steel shields on both sides SKU: SS-627-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-7mm-outer-o-22mm-width-7mm-with-stainless-steel-shields-on-both-sides-sku-ss-627-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø19mm width 6mm with blue NBR seals on both sides SKU: SS-626-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o19mm-width-6mm-with-blue-nbr-seals-on-both-sides-sku-ss-626-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 6mm outer Ø 19mm width 6mm with stainless steel shields on both sides SKU: SS-626-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-6mm-outer-o-19mm-width-6mm-with-stainless-steel-shields-on-both-sides-sku-ss-626-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø16mm width 5mm with blue NBR seals on both sides SKU: SS-625-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o16mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-625-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 5mm outer Ø 16mm width 5mm with stainless steel shields on both sides SKU: SS-625-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-5mm-outer-o-16mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-625-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 4mm outer Ø13mm width 5mm with blue NBR seals on both sides SKU: SS-624-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-4mm-outer-o13mm-width-5mm-with-blue-nbr-seals-on-both-sides-sku-ss-624-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 4mm outer Ø 13mm width 5mm with stainless steel shields on both sides SKU: SS-624-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-4mm-outer-o-13mm-width-5mm-with-stainless-steel-shields-on-both-sides-sku-ss-624-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 3mm outer Ø10mm width 4mm with blue NBR seals on both sides SKU: SS-623-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-3mm-outer-o10mm-width-4mm-with-blue-nbr-seals-on-both-sides-sku-ss-623-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 3mm outer Ø 10mm width 4mm with stainless steel shields on both sides SKU: SS-623-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-3mm-outer-o-10mm-width-4mm-with-stainless-steel-shields-on-both-sides-sku-ss-623-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 45mm outer Ø 85mm width 19mm with blue NBR seals on both sides SKU: SS-6209-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-45mm-outer-o-85mm-width-19mm-with-blue-nbr-seals-on-both-sides-sku-ss-6209-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 40mm outer Ø 80mm width 18mm with blue NBR seals on both sides SKU: SS-6208-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-40mm-outer-o-80mm-width-18mm-with-blue-nbr-seals-on-both-sides-sku-ss-6208-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 35mm outer Ø 72mm width 17mm with blue NBR seals on both sides SKU: SS-6207-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-35mm-outer-o-72mm-width-17mm-with-blue-nbr-seals-on-both-sides-sku-ss-6207-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 62mm width 16mm with blue NBR seals on both sides SKU: SS-6206-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-62mm-width-16mm-with-blue-nbr-seals-on-both-sides-sku-ss-6206-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 30mm outer Ø 62mm width 16mm with stainless steel shields on both sides SKU: SS-6206-ZZ-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-30mm-outer-o-62mm-width-16mm-with-stainless-steel-shields-on-both-sides-sku-ss-6206-zz-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [MAEDLER stainless steel deep groove ball bearing single row inner Ø 25mm outer Ø 52mm width 15mm with blue NBR seals on both sides SKU: SS-6205-2RS-MAE](https://maedler.in/product/maedler-stainless-steel-deep-groove-ball-bearing-single-row-inner-o-25mm-outer-o-52mm-width-15mm-with-blue-nbr-seals-on-both-sides-sku-ss-6205-2rs-mae/): Material: Stainless steel AISI 420C. Up to inner Ø 9mm lubricated with special grease SRL, for precision devices. From inner Ø 10mm lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1. • Stainless ball bearings in high quality, in common design. • Usable for high speed. • On choice: With friction-free metal shields ZZ (= 2Z) or with contacting, blue NBR rubber seals 2RS. Temperature range: -20°C to +90°C (for short time up to +110°C). Other types on request. - [Wing screw made from thermoplast d1 = 70mm external thread M8 x 30mm SKU: 66177004](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-70mm-external-thread-m8-x-30mm-sku-66177004/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 70mm external thread M8 x 20mm SKU: 66177003](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-70mm-external-thread-m8-x-20mm-sku-66177003/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing nut made from thermoplast d1 = 70mm internal thread M10 SKU: 66177002](https://maedler.in/product/wing-nut-made-from-thermoplast-d1-70mm-internal-thread-m10-sku-66177002/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Threated bush: Zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing nut made from thermoplast d1 = 70mm internal thread M8 SKU: 66177001](https://maedler.in/product/wing-nut-made-from-thermoplast-d1-70mm-internal-thread-m8-sku-66177001/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Threated bush: Zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Star knob similar to DIN 6336 made from aluminium type E diameter 63mm SKU: 66176300](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-aluminium-type-e-diameter-63mm-sku-66176300/): Material: GKAISi7Cu3, polished.Version E: with thread (tapped blind hole). - [Wing screw made from thermoplast d1 = 55mm external thread M10 x 40mm SKU: 66175508](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-55mm-external-thread-m10-x-40mm-sku-66175508/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 55mm external thread M10 x 30mm SKU: 66175507](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-55mm-external-thread-m10-x-30mm-sku-66175507/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 55mm external thread M10 x 20mm SKU: 66175506](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-55mm-external-thread-m10-x-20mm-sku-66175506/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 55mm external thread M8 x 40mm SKU: 66175505](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-55mm-external-thread-m8-x-40mm-sku-66175505/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 55mm external thread M8 x 30mm SKU: 66175504](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-55mm-external-thread-m8-x-30mm-sku-66175504/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 55mm external thread M8 x 20mm SKU: 66175503](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-55mm-external-thread-m8-x-20mm-sku-66175503/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing nut made from thermoplast d1 = 55mm internal thread M8 SKU: 66175502](https://maedler.in/product/wing-nut-made-from-thermoplast-d1-55mm-internal-thread-m8-sku-66175502/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Threated bush: Zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing nut made from thermoplast d1 = 55mm internal thread M6 SKU: 66175501](https://maedler.in/product/wing-nut-made-from-thermoplast-d1-55mm-internal-thread-m6-sku-66175501/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Threated bush: Zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Star knob similar to DIN 6336 made from aluminium type E diameter 50mm SKU: 66175000](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-aluminium-type-e-diameter-50mm-sku-66175000/): Material: GKAISi7Cu3, polished.Version E: with thread (tapped blind hole). - [Wing screw made from thermoplast d1 = 48mm external thread M6 x 40mm SKU: 66174807](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-48mm-external-thread-m6-x-40mm-sku-66174807/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 48mm external thread M6 x 30mm SKU: 66174806](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-48mm-external-thread-m6-x-30mm-sku-66174806/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 48mm external thread M6 x 20mm SKU: 66174805](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-48mm-external-thread-m6-x-20mm-sku-66174805/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 48mm external thread M5 x 20mm SKU: 66174804](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-48mm-external-thread-m5-x-20mm-sku-66174804/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 48mm external thread M5 x 16mm SKU: 66174803](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-48mm-external-thread-m5-x-16mm-sku-66174803/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing nut made from thermoplast d1 = 48mm internal thread M6 SKU: 66174802](https://maedler.in/product/wing-nut-made-from-thermoplast-d1-48mm-internal-thread-m6-sku-66174802/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Threated bush: Zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing nut made from thermoplast d1 = 48mm internal thread M5 SKU: 66174801](https://maedler.in/product/wing-nut-made-from-thermoplast-d1-48mm-internal-thread-m5-sku-66174801/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Threated bush: Zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Star knob similar to DIN 6336 made from aluminium type E diameter 40mm SKU: 66174000](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-aluminium-type-e-diameter-40mm-sku-66174000/): Material: GKAISi7Cu3, polished.Version E: with thread (tapped blind hole). - [Knurled knob made from thermoplast outside diameter 70mm internal thread M14 SKU: 66167002](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-70mm-internal-thread-m14-sku-66167002/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 70mm internal thread M12 SKU: 66167001](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-70mm-internal-thread-m12-sku-66167001/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Triangular knob made from thermoplast d1 = 60mm internal thread M12 SKU: 66166012](https://maedler.in/product/triangular-knob-made-from-thermoplast-d1-60mm-internal-thread-m12-sku-66166012/): Material: Thermoplast (Polyamide PA), black glossy finish. Brass bush. The special form is very elegant and easy to grip. - [Triangular knob made from thermoplast d1 = 60mm internal thread M10 SKU: 66166011](https://maedler.in/product/triangular-knob-made-from-thermoplast-d1-60mm-internal-thread-m10-sku-66166011/): Material: Thermoplast (Polyamide PA), black glossy finish. Brass bush. The special form is very elegant and easy to grip. - [Knurled knob screw made from thermoplast outside diameter 60mm external thread M12 x 50mm SKU: 66166008](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-60mm-external-thread-m12-x-50mm-sku-66166008/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 60mm external thread M10 x 50mm SKU: 66166005](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-60mm-external-thread-m10-x-50mm-sku-66166005/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 60mm internal thread M12 SKU: 66166002](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-60mm-internal-thread-m12-sku-66166002/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 60mm internal thread M10 SKU: 66166001](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-60mm-internal-thread-m10-sku-66166001/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 60mm blind hole 10mm SKU: 66166000](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-60mm-blind-hole-10mm-sku-66166000/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Triangular knob screw made from thermoplast d1 = 50mm external thread M10 x 50mm SKU: 66165018](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-50mm-external-thread-m10-x-50mm-sku-66165018/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 50mm external thread M10 x 30mm SKU: 66165017](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-50mm-external-thread-m10-x-30mm-sku-66165017/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 50mm external thread M8 x 50mm SKU: 66165015](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-50mm-external-thread-m8-x-50mm-sku-66165015/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 50mm external thread M8 x 30mm SKU: 66165014](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-50mm-external-thread-m8-x-30mm-sku-66165014/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob made from thermoplast d1 = 50mm internal thread M10 SKU: 66165012](https://maedler.in/product/triangular-knob-made-from-thermoplast-d1-50mm-internal-thread-m10-sku-66165012/): Material: Thermoplast (Polyamide PA), black glossy finish. Brass bush. The special form is very elegant and easy to grip. - [Triangular knob made from thermoplast d1 = 50mm internal thread M8 SKU: 66165011](https://maedler.in/product/triangular-knob-made-from-thermoplast-d1-50mm-internal-thread-m8-sku-66165011/): Material: Thermoplast (Polyamide PA), black glossy finish. Brass bush. The special form is very elegant and easy to grip. - [Knurled knob screw made from thermoplast outside diameter 50mm external thread M10 x 20mm SKU: 66165006](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-50mm-external-thread-m10-x-20mm-sku-66165006/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 50mm external thread M8 x 50mm SKU: 66165005](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-50mm-external-thread-m8-x-50mm-sku-66165005/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 50mm external thread M8 x 30mm SKU: 66165004](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-50mm-external-thread-m8-x-30mm-sku-66165004/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 50mm internal thread M10 SKU: 66165002](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-50mm-internal-thread-m10-sku-66165002/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 50mm internal thread M8 SKU: 66165001](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-50mm-internal-thread-m8-sku-66165001/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 50mm blind hole 8mm SKU: 66165000](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-50mm-blind-hole-8mm-sku-66165000/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Triangular knob screw made from thermoplast d1 = 40mm external thread M8 x 50mm SKU: 66164018](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-40mm-external-thread-m8-x-50mm-sku-66164018/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 40mm external thread M8 x 30mm SKU: 66164017](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-40mm-external-thread-m8-x-30mm-sku-66164017/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 40mm external thread M8 x 16mm SKU: 66164016](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-40mm-external-thread-m8-x-16mm-sku-66164016/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 40mm external thread M6 x 40mm SKU: 66164015](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-40mm-external-thread-m6-x-40mm-sku-66164015/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 40mm external thread M6 x 20mm SKU: 66164014](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-40mm-external-thread-m6-x-20mm-sku-66164014/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob made from thermoplast d1 = 40mm internal thread M8 SKU: 66164012](https://maedler.in/product/triangular-knob-made-from-thermoplast-d1-40mm-internal-thread-m8-sku-66164012/): Material: Thermoplast (Polyamide PA), black glossy finish. Brass bush. The special form is very elegant and easy to grip. - [Triangular knob made from thermoplast d1 = 40mm internal thread M6 SKU: 66164011](https://maedler.in/product/triangular-knob-made-from-thermoplast-d1-40mm-internal-thread-m6-sku-66164011/): Material: Thermoplast (Polyamide PA), black glossy finish. Brass bush. The special form is very elegant and easy to grip. - [Knurled knob screw made from thermoplast outside diameter 40mm external thread M8 x 50mm SKU: 66164008](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-40mm-external-thread-m8-x-50mm-sku-66164008/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 40mm external thread M8 x 30mm SKU: 66164007](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-40mm-external-thread-m8-x-30mm-sku-66164007/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 40mm external thread M8 x 16mm SKU: 66164006](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-40mm-external-thread-m8-x-16mm-sku-66164006/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 40mm external thread M6 x 40mm SKU: 66164005](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-40mm-external-thread-m6-x-40mm-sku-66164005/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 40mm external thread M6 x 20mm SKU: 66164004](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-40mm-external-thread-m6-x-20mm-sku-66164004/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 40mm external thread M6 x 10mm SKU: 66164003](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-40mm-external-thread-m6-x-10mm-sku-66164003/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 40mm internal thread M8 SKU: 66164002](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-40mm-internal-thread-m8-sku-66164002/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 40mm internal thread M6 SKU: 66164001](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-40mm-internal-thread-m6-sku-66164001/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 40mm blind hole 6mm SKU: 66164000](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-40mm-blind-hole-6mm-sku-66164000/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Triangular knob screw made from thermoplast d1 = 32mm external thread M6 x 40mm SKU: 66163218](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-32mm-external-thread-m6-x-40mm-sku-66163218/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 32mm external thread M6 x 20mm SKU: 66163217](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-32mm-external-thread-m6-x-20mm-sku-66163217/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 32mm external thread M6 x 10mm SKU: 66163216](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-32mm-external-thread-m6-x-10mm-sku-66163216/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 32mm external thread M5 x 40mm SKU: 66163215](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-32mm-external-thread-m5-x-40mm-sku-66163215/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 32mm external thread M5 x 20mm SKU: 66163214](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-32mm-external-thread-m5-x-20mm-sku-66163214/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob screw made from thermoplast d1 = 32mm external thread M5 x 10mm SKU: 66163213](https://maedler.in/product/triangular-knob-screw-made-from-thermoplast-d1-32mm-external-thread-m5-x-10mm-sku-66163213/): Material: Thermoplast (Polyamide PA), black glossy finish. Grub screw, zinc-plated steel, chromated. The special form is very elegant and easy to grip. - [Triangular knob made from thermoplast d1 = 32mm internal thread M6 SKU: 66163212](https://maedler.in/product/triangular-knob-made-from-thermoplast-d1-32mm-internal-thread-m6-sku-66163212/): Material: Thermoplast (Polyamide PA), black glossy finish. Brass bush. The special form is very elegant and easy to grip. - [Triangular knob made from thermoplast d1 = 32mm internal thread M5 SKU: 66163211](https://maedler.in/product/triangular-knob-made-from-thermoplast-d1-32mm-internal-thread-m5-sku-66163211/): Material: Thermoplast (Polyamide PA), black glossy finish. Brass bush. The special form is very elegant and easy to grip. - [Knurled knob screw made from thermoplast outside diameter 32mm external thread M6 x 40mm SKU: 66163208](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-32mm-external-thread-m6-x-40mm-sku-66163208/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 32mm external thread M6 x 20mm SKU: 66163207](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-32mm-external-thread-m6-x-20mm-sku-66163207/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 32mm external thread M6 x 10mm SKU: 66163206](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-32mm-external-thread-m6-x-10mm-sku-66163206/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 32mm external thread M5 x 40mm SKU: 66163205](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-32mm-external-thread-m5-x-40mm-sku-66163205/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 32mm external thread M5 x 20mm SKU: 66163204](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-32mm-external-thread-m5-x-20mm-sku-66163204/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob screw made from thermoplast outside diameter 32mm external thread M5 x 10mm SKU: 66163203](https://maedler.in/product/knurled-knob-screw-made-from-thermoplast-outside-diameter-32mm-external-thread-m5-x-10mm-sku-66163203/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Grub screw, zinc-plated steel, chromated. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 32mm internal thread M6 SKU: 66163202](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-32mm-internal-thread-m6-sku-66163202/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Knurled knob made from thermoplast outside diameter 32mm internal thread M5 SKU: 66163201](https://maedler.in/product/knurled-knob-made-from-thermoplast-outside-diameter-32mm-internal-thread-m5-sku-66163201/): Material: Thermoplast (Polypropylene PP) reinforced, impact resistant, black, matt. Brass bush. Version C = with blind hole d2. Version E = with threaded blind hole d3. Special surface (contact points as a quadratic truncated pyramid) for maximum torque without uncomfortable stress on the skin. - [Star knob similar to DIN 6336 made from plastic type K diameter 80mm SKU: 66158000](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-plastic-type-k-diameter-80mm-sku-66158000/): Material: Plastic PF31, black, glossy finish. Version K: with threaded bush of zinc-plated steel. Size M4 with threaded bush made from brass. - [Star knob similar to DIN 6336 made from plastic type K diameter 63mm SKU: 66156400](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-plastic-type-k-diameter-63mm-sku-66156400/): Material: Plastic PF31, black, glossy finish. Version K: with threaded bush of zinc-plated steel. Size M4 with threaded bush made from brass. - [Star knob similar to DIN 6336 made from plastic type K diameter 63mm SKU: 66156300](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-plastic-type-k-diameter-63mm-sku-66156300/): Material: Plastic PF31, black, glossy finish. Version K: with threaded bush of zinc-plated steel. Size M4 with threaded bush made from brass. - [Star knob similar to DIN 6336 made from plastic type K diameter 50mm SKU: 66155000](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-plastic-type-k-diameter-50mm-sku-66155000/): Material: Plastic PF31, black, glossy finish. Version K: with threaded bush of zinc-plated steel. Size M4 with threaded bush made from brass. - [Star knob similar to DIN 6336 made from plastic type K diameter 40mm SKU: 66154000](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-plastic-type-k-diameter-40mm-sku-66154000/): Material: Plastic PF31, black, glossy finish. Version K: with threaded bush of zinc-plated steel. Size M4 with threaded bush made from brass. - [Star knob similar to DIN 6336 made from plastic type K diameter 32mm SKU: 66153200](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-plastic-type-k-diameter-32mm-sku-66153200/): Material: Plastic PF31, black, glossy finish. Version K: with threaded bush of zinc-plated steel. Size M4 with threaded bush made from brass. - [Star knob similar to DIN 6336 made from plastic type K diameter 25mm SKU: 66152500](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-plastic-type-k-diameter-25mm-sku-66152500/): Material: Plastic PF31, black, glossy finish. Version K: with threaded bush of zinc-plated steel. Size M4 with threaded bush made from brass. - [Star knob similar to DIN 6336 made from plastic type K diameter 20mm SKU: 66152000](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-plastic-type-k-diameter-20mm-sku-66152000/): Material: Plastic PF31, black, glossy finish. Version K: with threaded bush of zinc-plated steel. Size M4 with threaded bush made from brass. - [Star knob GV similar DIN 6336 Technopolymer PA6GV ø80 M16 SKU: 66148000](https://maedler.in/product/star-knob-gv-similar-din-6336-technopolymer-pa6gv-o80-m16-sku-66148000/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Bush: Steel, zinc-plated, chromated blue. Version E = with tapped blind hole d2. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø63 M12x60 SKU: 66146360](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o63-m12x60-sku-66146360/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø63 M12x50 SKU: 66146350](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o63-m12x50-sku-66146350/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø63 M12x40 SKU: 66146340](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o63-m12x40-sku-66146340/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø63 M12x30 SKU: 66146330](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o63-m12x30-sku-66146330/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob GV similar DIN 6336 Technopolymer PA6GV ø63 M12 SKU: 66146300](https://maedler.in/product/star-knob-gv-similar-din-6336-technopolymer-pa6gv-o63-m12-sku-66146300/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Bush: Steel, zinc-plated, chromated blue. Version E = with tapped blind hole d2. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø50 M10x50 SKU: 66145050](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o50-m10x50-sku-66145050/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø50 M10x40 SKU: 66145040](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o50-m10x40-sku-66145040/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø50 M10x30 SKU: 66145030](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o50-m10x30-sku-66145030/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø50 M10x25 SKU: 66145025](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o50-m10x25-sku-66145025/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob GV similar DIN 6336 Technopolymer PA6GV ø50 M10 SKU: 66145000](https://maedler.in/product/star-knob-gv-similar-din-6336-technopolymer-pa6gv-o50-m10-sku-66145000/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Bush: Steel, zinc-plated, chromated blue. Version E = with tapped blind hole d2. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø40 M8x50 SKU: 66144050](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o40-m8x50-sku-66144050/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø40 M8x40 SKU: 66144040](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o40-m8x40-sku-66144040/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø40 M8x30 SKU: 66144030](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o40-m8x30-sku-66144030/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø40 M8x20 SKU: 66144020](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o40-m8x20-sku-66144020/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob GV similar DIN 6336 Technopolymer PA6GV ø40 M8 SKU: 66144000](https://maedler.in/product/star-knob-gv-similar-din-6336-technopolymer-pa6gv-o40-m8-sku-66144000/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Bush: Steel, zinc-plated, chromated blue. Version E = with tapped blind hole d2. - [Star knob similar DIN 6336 type GV Technopolymer PA6GV ø32 M6x40 SKU: 66143240](https://maedler.in/product/star-knob-similar-din-6336-type-gv-technopolymer-pa6gv-o32-m6x40-sku-66143240/): Material: Thermoplast Polyamide PA6 GV, glass-fibre reinforced, impact resistant, black matt. Threaded bolt: steel, zinc-plated, chromated blue. - [WD-40 SPECIALIST Cutting Oil 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070147](https://maedler.in/product/wd-40-specialist-cutting-oil-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070147/): The special spray improves machining processes for all metals. Spray head can be adjusted for area or spot spraying.• Contains Extreme Pressure and Anti Wear additives.• Extends tool life.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H362 May cause harm to breast-fed children.H400 Very toxic to aquatic life.H410 Very toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Silicone Lubricant 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070146](https://maedler.in/product/wd-40-specialist-silicone-lubricant-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070146/): The special spray with excellent lubricating properties is water-repellent and protects against moisture. Spray head (only 400 ml) can be adjusted for area or spot spraying.• formulated for improved high pressure performance.• prevents rust and corrosion.• avoids jamming and blockages.• colourless.• temperature range: -35°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 SPECIALIST Silicone Lubricant 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070145](https://maedler.in/product/wd-40-specialist-silicone-lubricant-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070145/): The special spray with excellent lubricating properties is water-repellent and protects against moisture. Spray head (only 400 ml) can be adjusted for area or spot spraying.• formulated for improved high pressure performance.• prevents rust and corrosion.• avoids jamming and blockages.• colourless.• temperature range: -35°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 SPECIALIST White Lithium Grease 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070144](https://maedler.in/product/wd-40-specialist-white-lithium-grease-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070144/): Special spray for long-lasting lubrication without dripping or running off. Spray head can be adjusted for area or spot spraying.• for use on metal to metal connections.• water and heat resistant lubricant.• ideal for load bearing application.• temperature range: -25°C to +130°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Dry PTFE Lubricant 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070143](https://maedler.in/product/wd-40-specialist-dry-ptfe-lubricant-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070143/): Special spray, for improved lubricating and protective properties. Dual action Smart Straw® applicator for wide area and precision spray applications.• reduces friction and wear.• ideal to be used on metals, plastic and glass.• leaves a clear, dry film.• advanced formulation works as an effective mould release agent.• Temperature range: -45°C to +260°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST PTFE Lubricant 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070142](https://maedler.in/product/wd-40-specialist-ptfe-lubricant-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070142/): The special spray extends the life expectancy of tools and equipment. Spray head can be adjusted for area or spot spraying.• reduces friction and wear.• for use on metal, glass, vinyl, rubber and plastic.• long-lasting formula with excellent lubricating properties.• temperature range: -20°C to +100°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Penetrant 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070141](https://maedler.in/product/wd-40-specialist-penetrant-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070141/): The special spray quickly separates rusted and corroded parts. Spray head (only 400 ml) can be adjusted for area or spot spraying.• quickly penetrates rusted and corroded parts.• highly water resistant.• very low surface tension to penetrate rust.• temperature range: -20°C to +90°CDangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Penetrant 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070140](https://maedler.in/product/wd-40-specialist-penetrant-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070140/): The special spray quickly separates rusted and corroded parts. Spray head (only 400 ml) can be adjusted for area or spot spraying.• quickly penetrates rusted and corroded parts.• highly water resistant.• very low surface tension to penetrate rust.• temperature range: -20°C to +90°CDangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 Multi-Use Product Spray applicator empty SKU: 14070130](https://maedler.in/product/wd-40-multi-use-product-spray-applicator-empty-sku-14070130/): The WD-40 Hand Sprayer is designed for use with WD-40 Multi-Use products from 5 litre and 25 litre canisters. With an adjustable spray nozzle, it is ideal to spray over a large area. Its ergonomic spray head and long handle and 600ml capacity make it easy to use. The spray applicator is sold empty. - [WD-40 Multi-Use Product 5 litres container inclusive spray applicator (Actual safety data sheet on the internet in the section Downloads) SKU: 14070124](https://maedler.in/product/wd-40-multi-use-product-5-litres-container-inclusive-spray-applicator-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070124/): Multi-purpose oil with multiple application possibilities in a 5 litre plastic canister, with an empty hand sprayer.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH226 Flammable liquid and vapour.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Multi-Use Product 5 litres container (Actual safety data sheet on the internet in the section Downloads) SKU: 14070122](https://maedler.in/product/wd-40-multi-use-product-5-litres-container-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070122/): Multi-purpose oil with multiple application possibilities in a 5 litre plastic canister.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH226 Flammable liquid and vapour.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Multi-Use Product Classic 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070121](https://maedler.in/product/wd-40-multi-use-product-classic-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070121/): Multipurpose oil spray with multiple application possibilities.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Multi-Use Product Classic 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070120](https://maedler.in/product/wd-40-multi-use-product-classic-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070120/): Multipurpose oil spray with multiple application possibilities.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Flexible 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070118](https://maedler.in/product/wd-40-flexible-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070118/): Multipurpose oil spray with multiple application possibilities. Spray tube made of metal, which can be bent individually.• rust remover.• penetrating oil.• lubricant.• displacement of moisture.• corrosion protection.• cleaner.• silicone-free.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 Multi-Use Product Smart Straw 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070115](https://maedler.in/product/wd-40-multi-use-product-smart-straw-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070115/): Multipurpose oil spray with multiple application possibilities. 5 important products in one: - displacement of moisture. - penetrating oil. - corrosion protection. - cleaner. - lubricant. Silicone-free. With SmartStraw-Double-Sprayer: Simply flip it up for precision stream, or flip it down again for regular spray action. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H304 May be fatal if swallowed and enters airways. H336 May cause drowsiness or dizziness. - [CRC Chain Lube 33236-AA with NSF H1 registration food processing safe SKU: 14070109](https://maedler.in/product/crc-chain-lube-33236-aa-with-nsf-h1-registration-food-processing-safe-sku-14070109/): Long lasting, food grade lubricant for chains, cables, joints, gears etc.. Also for use at food processing machines where incidental food contact may occur. • NSF registration for use in the food industry (category H1 - NSF-reg.-Nr. 017046). • long lasting lubrication film. • based on synthetic oil and PTFE. • temperature resistance: -15°C to +175°C. • 2-way-sprayer (precision or wide straw). Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. - [MAEDLER Stainless steel repair spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070107](https://maedler.in/product/maedler-stainless-steel-repair-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070107/): Heavy-duty, fast drying spray for the repair of stainles steel surfaces and also for decoration. - to touch up damaged stainless steel surfaces. - abrasion resistant. - reliable protection against corrosion even in extreme weather conditions. - effective surface coating for all metal parts, most plastics, wood, stone, cardboard, glass, etc - short-term heat resistant up to +250°C. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [MAEDLER Aluminium spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070106](https://maedler.in/product/maedler-aluminium-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070106/): Heavy-duty, fast drying spray for the repair of aluminium surfaces and also for decoration. - abrasion resistant. - protection against corrosion by aluminium pigments and resin. - fast drying. - heat resistant to +80ºC. - silicone-free. Danger H222-H229 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H304 May be fatal if swallowed and enters airways. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [MAEDLER Long-term corrosion protection spray 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070104](https://maedler.in/product/maedler-long-term-corrosion-protection-spray-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070104/): Reliable long term protection against corrosion and oxidation for all steel and metal parts. - The strong-bonding, ceraceous protective film is resistant against water and salt water. - long-term conservation even in a chemically aggressive environment. - highly capable of creep, displaces moisture bonds even to vertical surfaces. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. - [MAEDLER Zinc repair spray 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070103](https://maedler.in/product/maedler-zinc-repair-spray-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070103/): Heavy-duty, fast drying spray for the repair of zinc-plated surfaces. - colour: light silver, glossy finish similar to zinc. - optically almost indistinguishable from hot-dip zinc coating. - can be used to repair the zinc surface after welding. - good protection against corrosion: Zinc-aluminium pigments and resins protect the coated steel. - heat resistant to +200ºC. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [MAEDLER PTFE spray 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070102](https://maedler.in/product/maedler-ptfe-spray-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070102/): Hard-drying permanent separating, lubrication and anti-blocking agent. The substance can be removed using a suitable solvent. - free of grease, dry and clean. - water, dust and dirt repellent. - resistant against many chemicals, water, oils etc. - temperature resistant from -20°C to +200°C. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. EUH066 Repeated contact can lead to brittle or cracked skin. - [MAEDLER Spray cleaner 500 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070101](https://maedler.in/product/maedler-spray-cleaner-500-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070101/): Degreaser, mould cleaner, brake cleaner. - degreases and cleans metal, glass, etc. - resolves resinified residues. - removes adhesive residues. - cleans brake and clutch parts. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. - [MAEDLER Chain spray 400 ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070100](https://maedler.in/product/maedler-chain-spray-400-ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070100/): Special adhesive lubricant for the maintenance of heavy-duty, fast-running drive and timing chains, plain bearings, open gear boxes etc.. - corrosion protection. - strong bonding power. - highly capable of creep. - displaces moisture. - reducing noise. - protection against wear. - temperature resistant from -5°C to +140°C. - silicone-free. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [Belt tensioner SPANN-BOY® TS Roller-Ø 65mm Roller width 40mm SKU: 14041803](https://maedler.in/product/belt-tensioner-spann-boy-ts-roller-o-65mm-roller-width-40mm-sku-14041803/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These very low, ready-to-install belt tensioners enable noise reduction and wear reduction at belts.• With two springs of different strengths that can be activated individually or together. This allows three clamping forces to be set.• Usable tensioning way 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:The SPANN-BOY® TS has two different springs: one with low force and one with high force. These springs gan get activated separately or together.So it is possible to adjust three different tensioning forces:Only the low-force spring activated: 65 - 33 N.Only the high-force spring activated: 125 - 63 N.Both springs together activated: 190 - 96 N. - [Belt tensioner SPANN-BOY® TS Roller-Ø 65mm Roller width 30mm SKU: 14041802](https://maedler.in/product/belt-tensioner-spann-boy-ts-roller-o-65mm-roller-width-30mm-sku-14041802/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These very low, ready-to-install belt tensioners enable noise reduction and wear reduction at belts.• With two springs of different strengths that can be activated individually or together. This allows three clamping forces to be set.• Usable tensioning way 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:The SPANN-BOY® TS has two different springs: one with low force and one with high force. These springs gan get activated separately or together.So it is possible to adjust three different tensioning forces:Only the low-force spring activated: 65 - 33 N.Only the high-force spring activated: 125 - 63 N.Both springs together activated: 190 - 96 N. - [Belt tensioner SPANN-BOY® TS Roller-Ø 65mm Roller width 20mm SKU: 14041801](https://maedler.in/product/belt-tensioner-spann-boy-ts-roller-o-65mm-roller-width-20mm-sku-14041801/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These very low, ready-to-install belt tensioners enable noise reduction and wear reduction at belts.• With two springs of different strengths that can be activated individually or together. This allows three clamping forces to be set.• Usable tensioning way 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:The SPANN-BOY® TS has two different springs: one with low force and one with high force. These springs gan get activated separately or together.So it is possible to adjust three different tensioning forces:Only the low-force spring activated: 65 - 33 N.Only the high-force spring activated: 125 - 63 N.Both springs together activated: 190 - 96 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S high tensioning force roller-Ø 65mm (cylindrical) roller width 40mm SKU: 14041423](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-40mm-sku-14041423/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S high tensioning force roller-Ø 65mm (cylindrical) roller width 30mm SKU: 14041422](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-30mm-sku-14041422/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S high tensioning force roller-Ø 65mm (cylindrical) roller width 20mm SKU: 14041421](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-20mm-sku-14041421/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L high tensioning force roller-Ø 65mm (cylindrical) roller width 40mm SKU: 14041413](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-40mm-sku-14041413/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L high tensioning force roller-Ø 65mm (cylindrical) roller width 30mm SKU: 14041412](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-30mm-sku-14041412/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L high tensioning force roller-Ø 65mm (cylindrical) roller width 20mm SKU: 14041411](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-20mm-sku-14041411/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-0 high tensioning force roller-Ø 65mm (cylindrical) roller width 53mm SKU: 14041404](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-0-high-tensioning-force-roller-o-65mm-cylindrical-roller-width-53mm-sku-14041404/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C. * Tensioning way.** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S low tensioning force roller-Ø 65mm (cylindrical) roller width 40mm SKU: 14041323](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-40mm-sku-14041323/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S low tensioning force roller-Ø 65mm (cylindrical) roller width 30mm SKU: 14041322](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-30mm-sku-14041322/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-S low tensioning force roller-Ø 65mm (cylindrical) roller width 20mm SKU: 14041321](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-s-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-20mm-sku-14041321/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L low tensioning force roller-Ø 65mm (cylindrical) roller width 40mm SKU: 14041313](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-40mm-sku-14041313/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L low tensioning force roller-Ø 65mm (cylindrical) roller width 30mm SKU: 14041312](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-30mm-sku-14041312/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-L low tensioning force roller-Ø 65mm (cylindrical) roller width 20mm SKU: 14041311](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-l-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-20mm-sku-14041311/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 1 type SR-0 low tensioning force roller-Ø 65mm (cylindrical) roller width 53mm SKU: 14041304](https://maedler.in/product/belt-tensioner-spann-box-size-1-type-sr-0-low-tensioning-force-roller-o-65mm-cylindrical-roller-width-53mm-sku-14041304/): Material: Housing made of steel, black, powder-coated.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low.• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 6m/s.Temperature range: -20°C bis +60°C. * Tensioning way.** Max. recommended belt width. *** Tensioning force range.Adjustable Tensioning Forces:On choice, there are two versions, with low tensioning force or with high tensioning force. Both versions have three springs, which can get activated independent from each other to reach three different tensioning forces.Version with low tensioning force:1 spring activated: 58 - 32 N.2 springs activated: 116 - 64 N.3 springs activated: 174 - 96 N.Version with high tensioning force:1 spring activated: 132 - 60 N.2 springs activated: 264 - 120 N.3 springs activated: 396 - 180 N. - [Belt tensioner SPANN-BOX® size 0 high tensioning force roller-Ø 55mm (cylindrical) roller width 40mm SKU: 14041203](https://maedler.in/product/belt-tensioner-spann-box-size-0-high-tensioning-force-roller-o-55mm-cylindrical-roller-width-40mm-sku-14041203/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 high tensioning force roller-Ø 55mm (cylindrical) roller width 30mm SKU: 14041202](https://maedler.in/product/belt-tensioner-spann-box-size-0-high-tensioning-force-roller-o-55mm-cylindrical-roller-width-30mm-sku-14041202/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 high tensioning force roller-Ø 55mm (cylindrical) roller width 20mm SKU: 14041201](https://maedler.in/product/belt-tensioner-spann-box-size-0-high-tensioning-force-roller-o-55mm-cylindrical-roller-width-20mm-sku-14041201/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 low tensioning force roller-Ø 55mm (cylindrical) roller width 40mm SKU: 14041103](https://maedler.in/product/belt-tensioner-spann-box-size-0-low-tensioning-force-roller-o-55mm-cylindrical-roller-width-40mm-sku-14041103/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 low tensioning force roller-Ø 55mm (cylindrical) roller width 30mm SKU: 14041102](https://maedler.in/product/belt-tensioner-spann-box-size-0-low-tensioning-force-roller-o-55mm-cylindrical-roller-width-30mm-sku-14041102/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Belt tensioner SPANN-BOX® size 0 low tensioning force roller-Ø 55mm (cylindrical) roller width 20mm SKU: 14041101](https://maedler.in/product/belt-tensioner-spann-box-size-0-low-tensioning-force-roller-o-55mm-cylindrical-roller-width-20mm-sku-14041101/): Material: Housing from thermoplast.Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel.These small, ready-to install tensioners enable noise reduction and wear reduction at belts.• With spiral, linear spring. On choice two tensioning forces.• With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N).• Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm.• Max. permissible belt speed 3m/sTemperature range: -20°C bis +60°C.* Tensioning way. ** Max. recommended belt width. - [Triple-strand roller chain 16 B-3 pitch 1"x17.02mm SKU: 13800000](https://maedler.in/product/triple-strand-roller-chain-16-b-3-pitch-1x17-02mm-sku-13800000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Triple-strand roller chain DIN ISO 606 12 B-3 pitch 3/4x7/16" SKU: 13700000](https://maedler.in/product/triple-strand-roller-chain-din-iso-606-12-b-3-pitch-3-4x7-16-sku-13700000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Triple-strand roller chain 10 B-3 pitch 5/8x3/8" SKU: 13600000](https://maedler.in/product/triple-strand-roller-chain-10-b-3-pitch-5-8x3-8-sku-13600000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Triple-strand roller chain 08 B-3 pitch 1/2x5/16" SKU: 13500000](https://maedler.in/product/triple-strand-roller-chain-08-b-3-pitch-1-2x5-16-sku-13500000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Triple-strand roller chain 06 B-3 pitch 3/8x7/32" SKU: 13100000](https://maedler.in/product/triple-strand-roller-chain-06-b-3-pitch-3-8x7-32-sku-13100000/): Similar to DIN ISO 606 (ex DIN 8187). Material: special alloy steel. High quality single-strand roller chains, pre-stretched in accordance with DIN. Formed side plates (Size 06 with straight side plates). Chains with an odd number of links have inner links on both ends. Connecting links have to be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Self-lubrication double-strand roller chain Lamba 24 B-2 SKU: 12977500L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-24-b-2-sku-12977500l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Self-lubrication double-strand roller chain Lamba 20 B-2 SKU: 12977000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-20-b-2-sku-12977000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 20 B-2 SKU: 12966000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-20-b-2-sku-12966000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain 24 B-2 pitch 1 1/2x1" SKU: 12950000](https://maedler.in/product/double-strand-roller-chain-24-b-2-pitch-1-1-2x1-sku-12950000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain DIN ISO 606 20 B-2-GL pitch 1 1/4x3/4" with straight plates SKU: 12900000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-20-b-2-gl-pitch-1-1-4x3-4-with-straight-plates-sku-12900000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain DIN ISO 606 20 B-2 pitch 1 1/4x3/4" SKU: 12900000](https://maedler.in/product/double-strand-roller-chain-din-iso-606-20-b-2-pitch-1-1-4x3-4-sku-12900000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 16 B-2 pitch 1"x17.02mm material stainless steel 1.4301 SKU: 12899000](https://maedler.in/product/double-strand-roller-chain-16-b-2-pitch-1x17-02mm-material-stainless-steel-1-4301-sku-12899000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 16 B-2 SKU: 12877000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-16-b-2-sku-12877000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 16 B-2 SKU: 12866000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-16-b-2-sku-12866000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain DIN ISO 606 16 B-2-GLH pitch 1"x17,02mm with straight plates high version SKU: 12800000GLH](https://maedler.in/product/double-strand-roller-chain-din-iso-606-16-b-2-glh-pitch-1x1702mm-with-straight-plates-high-version-sku-12800000glh/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain DIN ISO 606 16 B-2-GL pitch 1"x17,02mm with straight plates SKU: 12800000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-16-b-2-gl-pitch-1x1702mm-with-straight-plates-sku-12800000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain 16 B-2 pitch 1"x17.02mm SKU: 12800000](https://maedler.in/product/double-strand-roller-chain-16-b-2-pitch-1x17-02mm-sku-12800000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 12 B-2 pitch 3/4x7/16" material stainless steel 1.4301 SKU: 12799000](https://maedler.in/product/double-strand-roller-chain-12-b-2-pitch-3-4x7-16-material-stainless-steel-1-4301-sku-12799000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 12 B-2 SKU: 12777000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-12-b-2-sku-12777000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 12 B-2 SKU: 12766000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-12-b-2-sku-12766000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain DIN ISO 606 12 B-2-GL pitch 3/4x7/16" with straight plates SKU: 12700000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-12-b-2-gl-pitch-3-4x7-16-with-straight-plates-sku-12700000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain 12 B-2 pitch 3/4x7/16" SKU: 12700000](https://maedler.in/product/double-strand-roller-chain-12-b-2-pitch-3-4x7-16-sku-12700000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain DIN ISO 606 10 B-2 pitch 5/8x3/8" material stainless steel 1.4301 SKU: 12699000](https://maedler.in/product/double-strand-roller-chain-din-iso-606-10-b-2-pitch-5-8x3-8-material-stainless-steel-1-4301-sku-12699000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 10 B-2 SKU: 12677000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-10-b-2-sku-12677000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 10 B-2 SKU: 12666000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-10-b-2-sku-12666000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain DIN ISO 606 10 B-2-GL pitch 5/8x3/8" with straight plates SKU: 12600000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-10-b-2-gl-pitch-5-8x3-8-with-straight-plates-sku-12600000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain DIN ISO 606 10 B-2 pitch 5/8x3/8" SKU: 12600000](https://maedler.in/product/double-strand-roller-chain-din-iso-606-10-b-2-pitch-5-8x3-8-sku-12600000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 08 B-2 pitch 1/2x5/16" material stainless steel 1.4301 SKU: 12599000](https://maedler.in/product/double-strand-roller-chain-08-b-2-pitch-1-2x5-16-material-stainless-steel-1-4301-sku-12599000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 08 B-2 SKU: 12577000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-08-b-2-sku-12577000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 08 B-2 SKU: 12566000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-08-b-2-sku-12566000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain DIN ISO 606 08 B-2-GL pitch 1/2x5/16" with straight plates SKU: 12500000GL](https://maedler.in/product/double-strand-roller-chain-din-iso-606-08-b-2-gl-pitch-1-2x5-16-with-straight-plates-sku-12500000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steels.High-quality duplex roller chains, pre-stretched according to DIN. With straight link plates, to use as conveyor chain or drive chain.Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links must be ordered separately.Temperature range: -20ºC to +120ºC. Other temperatures are possible if special grease is used. - [Double-strand roller chain 08 B-2 pitch 1/2x5/16" SKU: 12500000](https://maedler.in/product/double-strand-roller-chain-08-b-2-pitch-1-2x5-16-sku-12500000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 06 B-2 pitch 3/8x7/32" material stainless steel 1.4301 SKU: 12199000](https://maedler.in/product/double-strand-roller-chain-06-b-2-pitch-3-8x7-32-material-stainless-steel-1-4301-sku-12199000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Self-lubrication double-strand roller chain Lamba 06 B-2 SKU: 12177000L](https://maedler.in/product/self-lubrication-double-strand-roller-chain-lamba-06-b-2-sku-12177000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating duplex-strand roller chains in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength.Temperature range: -10°C to +150°C. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Anti corrosion double-strand roller chain Neptune 06 B-2 SKU: 12166000N](https://maedler.in/product/anti-corrosion-double-strand-roller-chain-neptune-06-b-2-sku-12166000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium duplex-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing unit 5m with 1 connecting link. If special lengths are needed, please tell us the length and the number of links (uneven number!). At all special lengths, connecting links have to be ordered separately. - [Double-strand roller chain 06 B-2 pitch 3/8x7/32" SKU: 12100000](https://maedler.in/product/double-strand-roller-chain-06-b-2-pitch-3-8x7-32-sku-12100000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Double-strand roller chain 05 B-2 pitch 8mm material stainless steel 1.4301 SKU: 12099000](https://maedler.in/product/double-strand-roller-chain-05-b-2-pitch-8mm-material-stainless-steel-1-4301-sku-12099000/): Material: Stainless steel 1.4301 (AISI 304). Duplex roller chains with good chemical resistance. Main dimensions according to DIN ISO 606. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the breaking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links have to be ordered separately. 1) With straight link plates. 2) Maximum values at the link. - [Double-strand roller chain 05 B-2 pitch 8mm SKU: 12000000](https://maedler.in/product/double-strand-roller-chain-05-b-2-pitch-8mm-sku-12000000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain-steels. High-quality duplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20° to 120°C. Other temparatures possible with special lubricants. - [Self-lubrication roller chain Lambda 24 B-1 SKU: 11077000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-24-b-1-sku-11077000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Anti corrosion roller chain Neptune 24 B-1 SKU: 11066000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-24-b-1-sku-11066000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 24 B-1 NP pitch 1 1/2x1" nickel-plated SKU: 11066000](https://maedler.in/product/roller-chain-similar-to-24-b-1-np-pitch-1-1-2x1-nickel-plated-sku-11066000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain Titan 24 B-1 SKU: 11000000T](https://maedler.in/product/roller-chain-titan-24-b-1-sku-11000000t/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. Premium simplex roller chains, developed for low wear, even under dusty environment. Seamless bushes with lube grooves. Specially hard, low friction pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +60°C. Other temperatures are possible if special grease is used. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain 24 B-1 pitch 1 1/2x1" SKU: 11000000](https://maedler.in/product/roller-chain-24-b-1-pitch-1-1-2x1-sku-11000000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Roller chain similar to 20 B-1 pitch 1 1/4x3/4" material stainless steel 1.4301 with straight plates SKU: 10999000GL](https://maedler.in/product/roller-chain-similar-to-20-b-1-pitch-1-1-4x3-4-material-stainless-steel-1-4301-with-straight-plates-sku-10999000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Roller chain 20 B-1 pitch 1 1/4x3/4" material stainless steel 1.4301 SKU: 10999000](https://maedler.in/product/roller-chain-20-b-1-pitch-1-1-4x3-4-material-stainless-steel-1-4301-sku-10999000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel 1.4301 (AISI 304). Good chemical resistance. Main dimensions according to DIN. Due to the material properties, the stated transmittable power and breaking load are below the value for the standard chains. The application should use no more than one sixth of the braking load stated. Pre-stretched. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links have to be ordered separately. - [Self-lubrication roller chain Lambda 20 B-1 SKU: 10977000L](https://maedler.in/product/self-lubrication-roller-chain-lambda-20-b-1-sku-10977000l/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels, sinter metal bushes. Self-lubricating single-strand roller chain in premium quality. Seamless sinter metal bushes, filled with NSF-H1 high-performance lubricate. Special treated pins. Sizes 08 to 16 with centre sink riveting. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +150°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Anti corrosion roller chain Neptune 20 B-1 SKU: 10966000N](https://maedler.in/product/anti-corrosion-roller-chain-neptune-20-b-1-sku-10966000n/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel, with corrosion protection coating. Premium single-strand roller chains with good corrosion resistance, but still highly loadable. Plates, bushes, pins and rollers with high-resiliant coating against moisture and alkaline cleaning agents. Sizes 08 to 16 with centre sink riveting. Performance and dimensions according to DIN. Dynamically prestretched. Wasted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -10°C to +60°C. Wider temperature range -10ºC to +230ºC on request. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 20 B-1 NP pitch 1 1/4x3/4" nickel-plated SKU: 10966000](https://maedler.in/product/roller-chain-similar-to-20-b-1-np-pitch-1-1-4x3-4-nickel-plated-sku-10966000/): Similar to DIN ISO 606 (ex DIN 8187). Material: Special Chain Steel, Nickel-Plated. High quality single-strand roller chains with good corrosion resistance. Dimensions and Pre-stretching according to DIN. Wasted Link Plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain Titan 20 B-1 SKU: 10900000T](https://maedler.in/product/roller-chain-titan-20-b-1-sku-10900000t/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steels. Outer plates nickel-plated. Inner plates black oxided. Premium simplex roller chains, developed for low wear, even under dusty environment. Seamless bushes with lube grooves. Specially hard, low friction pins. Dynamically prestretched. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Connecting links with ring coin plate for higher strength. Temperature range: -10°C to +60°C. Other temperatures are possible if special grease is used. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain DIN ISO 606 20 B-1-GL pitch 1 1/4x3/4" with straight plates SKU: 10900000GL](https://maedler.in/product/roller-chain-din-iso-606-20-b-1-gl-pitch-1-1-4x3-4-with-straight-plates-sku-10900000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Special chain steel.High-quality simplex roller chains, pre-stretched according to DIN.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately.Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. - [Roller chain 20 B-1 pitch 1 1/4x3/4" SKU: 10900000](https://maedler.in/product/roller-chain-20-b-1-pitch-1-1-4x3-4-sku-10900000/): According to DIN ISO 606 (ex DIN 8187). Material: Special chain steel. High-quality simplex roller chains, pre-stretched according to DIN. Waisted link plates (size 06 with straight link plates). Chains with an uneven number of links are supplied with inner links at both ends. Connecting links must be ordered separately. Temperature range: -20°C to +120°C. Other temperatures are possible if special grease is used. * Pitch 4mm: bush chain - [Chain connecting link type 11 / E stainless steel for roller chain similar to 16 B-1 pitch 1"x17.02mm SKU: 10899003](https://maedler.in/product/chain-connecting-link-type-11-e-stainless-steel-for-roller-chain-similar-to-16-b-1-pitch-1x17-02mm-sku-10899003/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304). - [Premium stainless steel roller chain similar to 16 B-1 SKU: 10899000P](https://maedler.in/product/premium-stainless-steel-roller-chain-similar-to-16-b-1-sku-10899000p/): Similar to DIN ISO 606 (ex DIN 8187). Material: Stainless steel, equivalent 1.4301 (AISI 304). Cold forged, with minimal magnetism. Premium simplex roller chains with high chemical resistance. Produced in consistently high quality. Main dimensions according to DIN. Due to the material properties, the transmittable power and breaking load are below the DIN values. The work load should not be higher than stated. Not lubricated. The chains must be lubricated according to the type of application. Waisted link plates (size 06 with straight link plates). Chains are supplied with an uneven number of links, with inner links at both ends. Temperature range: -20°C to +400°C. Please note: Packing Unit 5m with 1 Connecting Link. - [Roller chain similar to 16 B-1 pitch 1"x17.02mm material stainless steel 1.4301 with straight plates SKU: 10899000GL](https://maedler.in/product/roller-chain-similar-to-16-b-1-pitch-1x17-02mm-material-stainless-steel-1-4301-with-straight-plates-sku-10899000gl/): Similar to DIN ISO 606 (ex DIN 8187).Material: Stainless steel 1.4301 (AISI 304).Simplex roller chains with good chemical resistance.Main dimensions according to DIN 8187, but with straight link plates, to use as conveyor chain or drive chain.Chains with an uneven number of links are supplied with inner links at both ends.Connecting links must be ordered separately. - [Revolving handle made from steel DIN 98 St diameter 16mm type E with thread plug M6 SKU: 66311600](https://maedler.in/product/revolving-handle-made-from-steel-din-98-st-diameter-16mm-type-e-with-thread-plug-m6-sku-66311600/): Material: Steel zinc-plated. Version E = with threaded spindle and Allen screw. - [Fixed handle DIN 39 Al diameter 36mm type E with thread plug M16 material: aluminium polished SKU: 66233600](https://maedler.in/product/fixed-handle-din-39-al-diameter-36mm-type-e-with-thread-plug-m16-material-aluminium-polished-sku-66233600/): Material: Aluminium polished.Version E = with moulded-in threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle DIN 39 Al diameter 32mm type E with thread plug M12 material: aluminium polished SKU: 66233200](https://maedler.in/product/fixed-handle-din-39-al-diameter-32mm-type-e-with-thread-plug-m12-material-aluminium-polished-sku-66233200/): Material: Aluminium polished.Version E = with moulded-in threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle DIN 39 AL diameter 25mm type E with thread plug M10 material: aluminium polished SKU: 66232500](https://maedler.in/product/fixed-handle-din-39-al-diameter-25mm-type-e-with-thread-plug-m10-material-aluminium-polished-sku-66232500/): Material: Aluminium polished.Version E = with moulded-in threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle DIN 39 Al diameter 20mm type E with thread plug M8 material: aluminium polished SKU: 66232000](https://maedler.in/product/fixed-handle-din-39-al-diameter-20mm-type-e-with-thread-plug-m8-material-aluminium-polished-sku-66232000/): Material: Aluminium polished.Version E = with moulded-in threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle DIN 39 Al diameter 16mm type E with thread plug M6 material: aluminium polished SKU: 66231600](https://maedler.in/product/fixed-handle-din-39-al-diameter-16mm-type-e-with-thread-plug-m6-material-aluminium-polished-sku-66231600/): Material: Aluminium polished.Version E = with moulded-in threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle made from plastic DIN 39 TH diameter 32mm type E with thread plug M12 SKU: 66223200](https://maedler.in/product/fixed-handle-made-from-plastic-din-39-th-diameter-32mm-type-e-with-thread-plug-m12-sku-66223200/): Material: Plastic Thermoplast (Polyamide), black, matt finish. Version E = with threaded bolt and Allen screw. - [Fixed handle made from plastic DIN 39 TH diameter 25mm type E with thread plug M10 SKU: 66222500](https://maedler.in/product/fixed-handle-made-from-plastic-din-39-th-diameter-25mm-type-e-with-thread-plug-m10-sku-66222500/): Material: Plastic Thermoplast (Polyamide), black, matt finish. Version E = with threaded bolt and Allen screw. - [Fixed handle made from plastic DIN 39 TH diameter 20mm type E with thread plug M8 SKU: 66222000](https://maedler.in/product/fixed-handle-made-from-plastic-din-39-th-diameter-20mm-type-e-with-thread-plug-m8-sku-66222000/): Material: Plastic Thermoplast (Polyamide), black, matt finish. Version E = with threaded bolt and Allen screw. - [Fixed handle made from steel DIN 39 St diameter 36mm type E with thread plug M16 SKU: 66213600](https://maedler.in/product/fixed-handle-made-from-steel-din-39-st-diameter-36mm-type-e-with-thread-plug-m16-sku-66213600/): Material: Steel zinc-plated.Version E = with threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle made from steel DIN 39 St diameter 32mm type E with thread plug M12 SKU: 66213200](https://maedler.in/product/fixed-handle-made-from-steel-din-39-st-diameter-32mm-type-e-with-thread-plug-m12-sku-66213200/): Material: Steel zinc-plated.Version E = with threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle made from steel DIN 39 St diameter 25mm type E with thread plug M10 SKU: 66212500](https://maedler.in/product/fixed-handle-made-from-steel-din-39-st-diameter-25mm-type-e-with-thread-plug-m10-sku-66212500/): Material: Steel zinc-plated.Version E = with threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle made from steel DIN 39 St diameter 20mm type E with thread plug M8 SKU: 66212000](https://maedler.in/product/fixed-handle-made-from-steel-din-39-st-diameter-20mm-type-e-with-thread-plug-m8-sku-66212000/): Material: Steel zinc-plated.Version E = with threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle made from steel DIN 39 St diameter 16mm type E with thread plug M6 SKU: 66211600](https://maedler.in/product/fixed-handle-made-from-steel-din-39-st-diameter-16mm-type-e-with-thread-plug-m6-sku-66211600/): Material: Steel zinc-plated.Version E = with threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle made from steel DIN 39 St diameter 13mm type E with thread plug M5 SKU: 66211300](https://maedler.in/product/fixed-handle-made-from-steel-din-39-st-diameter-13mm-type-e-with-thread-plug-m5-sku-66211300/): Material: Steel zinc-plated.Version E = with threaded bolt and Allen screw.* not according to DIN 39. - [Fixed handle made from steel DIN 39 St diameter 10mm type E with thread plug M4 SKU: 66211000](https://maedler.in/product/fixed-handle-made-from-steel-din-39-st-diameter-10mm-type-e-with-thread-plug-m4-sku-66211000/): Material: Steel zinc-plated.Version E = with threaded bolt and Allen screw.* not according to DIN 39. - [Wing screw stainless steel d1=58mm external thread M10 x 30mm SKU: 66199772](https://maedler.in/product/wing-screw-stainless-steel-d158mm-external-thread-m10-x-30mm-sku-66199772/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=58mm external thread M10 x 25mm SKU: 66199771](https://maedler.in/product/wing-screw-stainless-steel-d158mm-external-thread-m10-x-25mm-sku-66199771/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=58mm external thread M10 x 20mm SKU: 66199770](https://maedler.in/product/wing-screw-stainless-steel-d158mm-external-thread-m10-x-20mm-sku-66199770/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=58mm external thread M8 x 30mm SKU: 66199769](https://maedler.in/product/wing-screw-stainless-steel-d158mm-external-thread-m8-x-30mm-sku-66199769/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=58mm external thread M8 x 25mm SKU: 66199768](https://maedler.in/product/wing-screw-stainless-steel-d158mm-external-thread-m8-x-25mm-sku-66199768/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=58mm external thread M8 x 20mm SKU: 66199767](https://maedler.in/product/wing-screw-stainless-steel-d158mm-external-thread-m8-x-20mm-sku-66199767/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=46mm external thread M8 x 25mm SKU: 66199766](https://maedler.in/product/wing-screw-stainless-steel-d146mm-external-thread-m8-x-25mm-sku-66199766/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=46mm external thread M8 x 20mm SKU: 66199765](https://maedler.in/product/wing-screw-stainless-steel-d146mm-external-thread-m8-x-20mm-sku-66199765/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=46mm external thread M8 x 16mm SKU: 66199764](https://maedler.in/product/wing-screw-stainless-steel-d146mm-external-thread-m8-x-16mm-sku-66199764/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=46mm external thread M6 x 25mm SKU: 66199763](https://maedler.in/product/wing-screw-stainless-steel-d146mm-external-thread-m6-x-25mm-sku-66199763/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=46mm external thread M6 x 16mm SKU: 66199762](https://maedler.in/product/wing-screw-stainless-steel-d146mm-external-thread-m6-x-16mm-sku-66199762/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing screw stainless steel d1=46mm external thread M6 x 16mm SKU: 66199761](https://maedler.in/product/wing-screw-stainless-steel-d146mm-external-thread-m6-x-16mm-sku-66199761/): Material: Stainless steel 1.4308 (CF-8), precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing nut stainless steel d1 = 58mm internal thread M10 SKU: 66199752](https://maedler.in/product/wing-nut-stainless-steel-d1-58mm-internal-thread-m10-sku-66199752/): Material: Stainless steel 1.4308 (CF-8), Precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing nut stainless steel d1 = 58mm internal thread M8 SKU: 66199751](https://maedler.in/product/wing-nut-stainless-steel-d1-58mm-internal-thread-m8-sku-66199751/): Material: Stainless steel 1.4308 (CF-8), Precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing nut stainless steel d1 = 46mm internal thread M8 SKU: 66199742](https://maedler.in/product/wing-nut-stainless-steel-d1-46mm-internal-thread-m8-sku-66199742/): Material: Stainless steel 1.4308 (CF-8), Precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Wing nut stainless steel d1 = 46mm internal thread M6 SKU: 66199741](https://maedler.in/product/wing-nut-stainless-steel-d1-46mm-internal-thread-m6-sku-66199741/): Material: Stainless steel 1.4308 (CF-8), Precision cast, matt blasted. With indents for large, easy to grip contact surfaces. For high tightening torques. Easy to clean. - [Triangular knob stainless steel d1 = 60mm internal thread M12 SKU: 66199662](https://maedler.in/product/triangular-knob-stainless-steel-d1-60mm-internal-thread-m12-sku-66199662/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Elegant, easy to grip and clean. For comparably high torque transmission. - [Triangular knob stainless steel d1 = 60mm internal thread M10 SKU: 66199661](https://maedler.in/product/triangular-knob-stainless-steel-d1-60mm-internal-thread-m10-sku-66199661/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Elegant, easy to grip and clean. For comparably high torque transmission. - [Triangular knob stainless steel d1 = 50mm internal thread M10 SKU: 66199652](https://maedler.in/product/triangular-knob-stainless-steel-d1-50mm-internal-thread-m10-sku-66199652/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Elegant, easy to grip and clean. For comparably high torque transmission. - [Triangular knob stainless steel d1 = 50mm internal thread M8 SKU: 66199651](https://maedler.in/product/triangular-knob-stainless-steel-d1-50mm-internal-thread-m8-sku-66199651/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Elegant, easy to grip and clean. For comparably high torque transmission. - [Triangular knob stainless steel d1 = 40mm internal thread M8 SKU: 66199642](https://maedler.in/product/triangular-knob-stainless-steel-d1-40mm-internal-thread-m8-sku-66199642/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Elegant, easy to grip and clean. For comparably high torque transmission. - [Triangular knob stainless steel d1 = 40mm internal thread M6 SKU: 66199641](https://maedler.in/product/triangular-knob-stainless-steel-d1-40mm-internal-thread-m6-sku-66199641/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Elegant, easy to grip and clean. For comparably high torque transmission. - [Triangular knob stainless steel d1 = 32mm internal thread M6 SKU: 66199632](https://maedler.in/product/triangular-knob-stainless-steel-d1-32mm-internal-thread-m6-sku-66199632/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Elegant, easy to grip and clean. For comparably high torque transmission. - [Triangular knob stainless steel d1 = 32mm internal thread M5 SKU: 66199631](https://maedler.in/product/triangular-knob-stainless-steel-d1-32mm-internal-thread-m5-sku-66199631/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Elegant, easy to grip and clean. For comparably high torque transmission. - [Star knob screw 5334 stainless steel diameter 60mm thread M12 x 50mm SKU: 66199349](https://maedler.in/product/star-knob-screw-5334-stainless-steel-diameter-60mm-thread-m12-x-50mm-sku-66199349/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish.Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob screw 5334 stainless steel diameter 60mm thread M12 x 40mm SKU: 66199348](https://maedler.in/product/star-knob-screw-5334-stainless-steel-diameter-60mm-thread-m12-x-40mm-sku-66199348/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish.Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob screw 5334 stainless steel diameter 60mm thread M12 x 30mm SKU: 66199347](https://maedler.in/product/star-knob-screw-5334-stainless-steel-diameter-60mm-thread-m12-x-30mm-sku-66199347/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish.Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob screw 5334 stainless steel diameter 50mm thread M10 x 40mm SKU: 66199346](https://maedler.in/product/star-knob-screw-5334-stainless-steel-diameter-50mm-thread-m10-x-40mm-sku-66199346/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish.Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob screw 5334 stainless steel diameter 50mm thread M10 x 30mm SKU: 66199345](https://maedler.in/product/star-knob-screw-5334-stainless-steel-diameter-50mm-thread-m10-x-30mm-sku-66199345/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish.Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob screw 5334 stainless steel diameter 50mm thread M10 x 20mm SKU: 66199344](https://maedler.in/product/star-knob-screw-5334-stainless-steel-diameter-50mm-thread-m10-x-20mm-sku-66199344/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish.Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob screw 5334 stainless steel diameter 40mm thread M8 x 40mm SKU: 66199343](https://maedler.in/product/star-knob-screw-5334-stainless-steel-diameter-40mm-thread-m8-x-40mm-sku-66199343/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish.Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob screw 5334 stainless steel diameter 40mm thread M8 x 30mm SKU: 66199342](https://maedler.in/product/star-knob-screw-5334-stainless-steel-diameter-40mm-thread-m8-x-30mm-sku-66199342/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish.Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob screw 5334 stainless steel diameter 40mm thread M8 x 20mm SKU: 66199341](https://maedler.in/product/star-knob-screw-5334-stainless-steel-diameter-40mm-thread-m8-x-20mm-sku-66199341/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish.Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob 5335 stainless steel type E thread M12 SKU: 66199335](https://maedler.in/product/star-knob-5335-stainless-steel-type-e-thread-m12-sku-66199335/): Material: Stainless steel 1.4305 (AISI 303), blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Especially suited for the food-processing machinery industry, with smooth and enclosed areas. - [Star knob 5335 stainless steel type E thread M10 SKU: 66199334](https://maedler.in/product/star-knob-5335-stainless-steel-type-e-thread-m10-sku-66199334/): Material: Stainless steel 1.4305 (AISI 303), blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Especially suited for the food-processing machinery industry, with smooth and enclosed areas. - [Star knob 5335 stainless steel type E thread M10 SKU: 66199333](https://maedler.in/product/star-knob-5335-stainless-steel-type-e-thread-m10-sku-66199333/): Material: Stainless steel 1.4305 (AISI 303), blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Especially suited for the food-processing machinery industry, with smooth and enclosed areas. - [Star knob 5335 stainless steel type E thread M8 SKU: 66199332](https://maedler.in/product/star-knob-5335-stainless-steel-type-e-thread-m8-sku-66199332/): Material: Stainless steel 1.4305 (AISI 303), blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Especially suited for the food-processing machinery industry, with smooth and enclosed areas. - [Star knob 5335 stainless steel type E thread M8 SKU: 66199331](https://maedler.in/product/star-knob-5335-stainless-steel-type-e-thread-m8-sku-66199331/): Material: Stainless steel 1.4305 (AISI 303), blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Especially suited for the food-processing machinery industry, with smooth and enclosed areas. - [Star knob 5335 stainless steel type E thread M6 SKU: 66199330](https://maedler.in/product/star-knob-5335-stainless-steel-type-e-thread-m6-sku-66199330/): Material: Stainless steel 1.4305 (AISI 303), blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Especially suited for the food-processing machinery industry, with smooth and enclosed areas. - [Star knob 5335 stainless steel type C bore 12H7 SKU: 66199325](https://maedler.in/product/star-knob-5335-stainless-steel-type-c-bore-12h7-sku-66199325/): Material: Stainless steel 1.4305 (AISI 303), blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Especially suited for the food-processing machinery industry, with smooth and enclosed areas. - [Star knob 5335 stainless steel type C bore 10H7 SKU: 66199323](https://maedler.in/product/star-knob-5335-stainless-steel-type-c-bore-10h7-sku-66199323/): Material: Stainless steel 1.4305 (AISI 303), blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Especially suited for the food-processing machinery industry, with smooth and enclosed areas. - [Star knob 5335 stainless steel type C bore 8H7 SKU: 66199321](https://maedler.in/product/star-knob-5335-stainless-steel-type-c-bore-8h7-sku-66199321/): Material: Stainless steel 1.4305 (AISI 303), blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Especially suited for the food-processing machinery industry, with smooth and enclosed areas. - [Star knob 5334 stainless steel type E thread M12 SKU: 66199315](https://maedler.in/product/star-knob-5334-stainless-steel-type-e-thread-m12-sku-66199315/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob 5334 stainless steel type E thread M10 SKU: 66199313](https://maedler.in/product/star-knob-5334-stainless-steel-type-e-thread-m10-sku-66199313/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob 5334 stainless steel type E thread M8 SKU: 66199311](https://maedler.in/product/star-knob-5334-stainless-steel-type-e-thread-m8-sku-66199311/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob 5334 stainless steel type C bore 12H7 SKU: 66199305](https://maedler.in/product/star-knob-5334-stainless-steel-type-c-bore-12h7-sku-66199305/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob 5334 stainless steel type C bore 10H7 SKU: 66199303](https://maedler.in/product/star-knob-5334-stainless-steel-type-c-bore-10h7-sku-66199303/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob 5334 stainless steel type C bore 8H7 SKU: 66199301](https://maedler.in/product/star-knob-5334-stainless-steel-type-c-bore-8h7-sku-66199301/): Material: Stainless steel 1.4301 (AISI 304). Grip drawn from stainless-steel sheet. Hub butt-welded on, blasted, matt finish. Version C: with blind hole H7. Version E: with thread (tapped blind hole) d2. Refined and cost-saving manufacturing techniques led to this cost-efficient stainless-steel-version. - [Star knob screw similar to DIN 6336 type TE Ø63mm M12 x 60 SKU: 66196360](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o63mm-m12-x-60-sku-66196360/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø63mm M12 x 40 SKU: 66196340](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o63mm-m12-x-40-sku-66196340/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø63mm M12 x 30 SKU: 66196330](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o63mm-m12-x-30-sku-66196330/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø50mm M10 x 45 SKU: 66195045](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o50mm-m10-x-45-sku-66195045/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø50mm M10 x 30 SKU: 66195030](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o50mm-m10-x-30-sku-66195030/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø50mm M10 x 25 SKU: 66195025](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o50mm-m10-x-25-sku-66195025/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø40mm M8 x 30 SKU: 66194030](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o40mm-m8-x-30-sku-66194030/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø40mm M8 x 25 SKU: 66194025](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o40mm-m8-x-25-sku-66194025/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø40mm M8 x 20 SKU: 66194020](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o40mm-m8-x-20-sku-66194020/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø40mm M8 x 16 SKU: 66194016](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o40mm-m8-x-16-sku-66194016/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø32mm M6 x 25 SKU: 66193225](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o32mm-m6-x-25-sku-66193225/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø32mm M6 x 20 SKU: 66193220](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o32mm-m6-x-20-sku-66193220/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type TE Ø32mm M6 x 16 SKU: 66193216](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-te-o32mm-m6-x-16-sku-66193216/): Material: Plastic Thermoplast (Polyamide). Threaded bolt: steel, zinc-plated, chromated blue. Version TE = grip part with moulded-in protruding steel hub (steel hub and threaded bolt made from one part, turned). - [Star knob screw similar to DIN 6336 type ST Ø63mm M12 x 60 SKU: 66186360](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o63mm-m12-x-60-sku-66186360/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø63mm M12 x 40 SKU: 66186340](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o63mm-m12-x-40-sku-66186340/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø63mm M12 x 30 SKU: 66186330](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o63mm-m12-x-30-sku-66186330/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø63mm M12 x 20 SKU: 66186320](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o63mm-m12-x-20-sku-66186320/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø50mm M10 x 45 SKU: 66185045](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o50mm-m10-x-45-sku-66185045/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø50mm M10 x 30 SKU: 66185030](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o50mm-m10-x-30-sku-66185030/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø50mm M10 x 25 SKU: 66185025](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o50mm-m10-x-25-sku-66185025/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø50mm M10 x 20 SKU: 66185020](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o50mm-m10-x-20-sku-66185020/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø40mm M8 x 30 SKU: 66184030](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o40mm-m8-x-30-sku-66184030/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø40mm M8 x 25 SKU: 66184025](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o40mm-m8-x-25-sku-66184025/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø40mm M8 x 20 SKU: 66184020](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o40mm-m8-x-20-sku-66184020/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø40mm M8 x 16 SKU: 66184016](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o40mm-m8-x-16-sku-66184016/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø32mm M6 x 25 SKU: 66183225](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o32mm-m6-x-25-sku-66183225/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø32mm M6 x 20 SKU: 66183220](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o32mm-m6-x-20-sku-66183220/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø32mm M6 x 16 SKU: 66183216](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o32mm-m6-x-16-sku-66183216/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø32mm M6 x 10 SKU: 66183210](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o32mm-m6-x-10-sku-66183210/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø25mm M5 x 20 SKU: 66182520](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o25mm-m5-x-20-sku-66182520/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø25mm M5 x 15 SKU: 66182515](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o25mm-m5-x-15-sku-66182515/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob screw similar to DIN 6336 type ST Ø25mm M5 x 10 SKU: 66182510](https://maedler.in/product/star-knob-screw-similar-to-din-6336-type-st-o25mm-m5-x-10-sku-66182510/): Material: Thermoplast Polyamide PA. Threaded bolt: steel, zinc-plated, chromated blue. - [Star knob similar to DIN 6336 made from aluminium type E diameter 80mm SKU: 66178000](https://maedler.in/product/star-knob-similar-to-din-6336-made-from-aluminium-type-e-diameter-80mm-sku-66178000/): Material: GKAISi7Cu3, polished.Version E: with thread (tapped blind hole). - [Wing screw made from thermoplast d1 = 70mm external thread M10 x 40mm SKU: 66177007](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-70mm-external-thread-m10-x-40mm-sku-66177007/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 70mm external thread M10 x 30mm SKU: 66177006](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-70mm-external-thread-m10-x-30mm-sku-66177006/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Wing screw made from thermoplast d1 = 70mm external thread M10 x 20mm SKU: 66177005](https://maedler.in/product/wing-screw-made-from-thermoplast-d1-70mm-external-thread-m10-x-20mm-sku-66177005/): Material: Thermoplast (Polyamide PA), glass-fibre reinforced, black matt, brass bush. Grub screw, zinc-plated steel, chromated. With indents for large, easy to grip contact surfaces. For relatively high tightening torques. - [Plastic guide rail 40 x 20 x 1000mm for roller chain 16B-1 SKU: 14100801](https://maedler.in/product/plastic-guide-rail-40-x-20-x-1000mm-for-roller-chain-16b-1-sku-14100801/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 15 x 1000mm for roller chain 16B-1 SKU: 14100800](https://maedler.in/product/plastic-guide-rail-40-x-15-x-1000mm-for-roller-chain-16b-1-sku-14100800/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 20 x 1000mm for roller chain 12B-1 SKU: 14100701](https://maedler.in/product/plastic-guide-rail-25-x-20-x-1000mm-for-roller-chain-12b-1-sku-14100701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 15 x 1000mm for roller chain 12B-1 SKU: 14100700](https://maedler.in/product/plastic-guide-rail-25-x-15-x-1000mm-for-roller-chain-12b-1-sku-14100700/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 20 x 1000mm for roller chain 10B-1 SKU: 14100601](https://maedler.in/product/plastic-guide-rail-20-x-20-x-1000mm-for-roller-chain-10b-1-sku-14100601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 15 x 1000mm for roller chain 10B-1 SKU: 14100600](https://maedler.in/product/plastic-guide-rail-20-x-15-x-1000mm-for-roller-chain-10b-1-sku-14100600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 20 x 1000mm for roller chain 08B-1 SKU: 14100502](https://maedler.in/product/plastic-guide-rail-20-x-20-x-1000mm-for-roller-chain-08b-1-sku-14100502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 15 x 1000mm for roller chain 08B-1 SKU: 14100501](https://maedler.in/product/plastic-guide-rail-20-x-15-x-1000mm-for-roller-chain-08b-1-sku-14100501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 10 x 1000mm for roller chain 08B-1 SKU: 14100500](https://maedler.in/product/plastic-guide-rail-20-x-10-x-1000mm-for-roller-chain-08b-1-sku-14100500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 15 x 10 x 1000mm for roller chain 083-1 SKU: 14100300](https://maedler.in/product/plastic-guide-rail-15-x-10-x-1000mm-for-roller-chain-083-1-sku-14100300/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 15 x 10 x 1000mm for roller chain 06B-1 SKU: 14100100](https://maedler.in/product/plastic-guide-rail-15-x-10-x-1000mm-for-roller-chain-06b-1-sku-14100100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Bolt-on hub for plate wheel hub diameter 160mm material steel C45 SKU: 14090188](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-160mm-material-steel-c45-sku-14090188/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 140mm material steel C45 SKU: 14090187](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-140mm-material-steel-c45-sku-14090187/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 100mm material steel C45 SKU: 14090186](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-100mm-material-steel-c45-sku-14090186/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 80mm material steel C45 SKU: 14090185](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-80mm-material-steel-c45-sku-14090185/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 70mm material steel C45 SKU: 14090184](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-70mm-material-steel-c45-sku-14090184/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 60mm material steel C45 SKU: 14090183](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-60mm-material-steel-c45-sku-14090183/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 50mm material steel C45 SKU: 14090182](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-50mm-material-steel-c45-sku-14090182/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 40mm material steel C45 SKU: 14090181](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-40mm-material-steel-c45-sku-14090181/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [Bolt-on hub for plate wheel hub diameter 30mm material steel C45 SKU: 14090180](https://maedler.in/product/bolt-on-hub-for-plate-wheel-hub-diameter-30mm-material-steel-c45-sku-14090180/): Material: Steel.Hub for fixing a chain plate wheel or similar parts onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel has to be ordered separately. Customized bores and keyway available at extra charge. Reworking like hub hole for the shaft against extra charge. - [adaptor for taper bush 4040 outside diameter 185mm material cast iron SKU: 14090173](https://maedler.in/product/adaptor-for-taper-bush-4040-outside-diameter-185mm-material-cast-iron-sku-14090173/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 3535 outside diameter 160mm material cast iron SKU: 14090171](https://maedler.in/product/adaptor-for-taper-bush-3535-outside-diameter-160mm-material-cast-iron-sku-14090171/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 3030 outside diameter 130mm material cast iron SKU: 14090169](https://maedler.in/product/adaptor-for-taper-bush-3030-outside-diameter-130mm-material-cast-iron-sku-14090169/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 2517 outside diameter 105mm material cast iron SKU: 14090167](https://maedler.in/product/adaptor-for-taper-bush-2517-outside-diameter-105mm-material-cast-iron-sku-14090167/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 1615 outside diameter 70mm material cast iron SKU: 14090165](https://maedler.in/product/adaptor-for-taper-bush-1615-outside-diameter-70mm-material-cast-iron-sku-14090165/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 1610 outside diameter 70mm material cast iron SKU: 14090164](https://maedler.in/product/adaptor-for-taper-bush-1610-outside-diameter-70mm-material-cast-iron-sku-14090164/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 1210 outside diameter 60mm material cast iron SKU: 14090162](https://maedler.in/product/adaptor-for-taper-bush-1210-outside-diameter-60mm-material-cast-iron-sku-14090162/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [adaptor for taper bush 1008 outside diameter 45mm material cast iron SKU: 14090160](https://maedler.in/product/adaptor-for-taper-bush-1008-outside-diameter-45mm-material-cast-iron-sku-14090160/): Material: Grey cast iron GG25.Hub for fixing a sprocket or similar parts with a low priced taper bush onto a shaft. The sprocket must get a center hole Ø D (recommended tolerance: H8) and a special keyway. Then, the taper bush can get inserted into the adaptor and both parts can get inserted into the wheel. The taper bush, the sprocket and the key have to be ordered separately.* Special keyway size.** Feather key not like DIN.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 3020 outside diameter 485mm material steel SKU: 14090147](https://maedler.in/product/bolt-on-hub-for-taper-bush-3020-outside-diameter-485mm-material-steel-sku-14090147/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 3020 outside diameter 430mm material cast iron SKU: 14090146](https://maedler.in/product/bolt-on-hub-for-taper-bush-3020-outside-diameter-430mm-material-cast-iron-sku-14090146/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 3020 outside diameter 220mm material cast iron SKU: 14090145](https://maedler.in/product/bolt-on-hub-for-taper-bush-3020-outside-diameter-220mm-material-cast-iron-sku-14090145/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 2517 outside diameter 340mm material cast iron SKU: 14090141](https://maedler.in/product/bolt-on-hub-for-taper-bush-2517-outside-diameter-340mm-material-cast-iron-sku-14090141/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 2517 outside diameter 185mm material cast iron SKU: 14090140](https://maedler.in/product/bolt-on-hub-for-taper-bush-2517-outside-diameter-185mm-material-cast-iron-sku-14090140/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 2012 outside diameter 270mm material cast iron SKU: 14090136](https://maedler.in/product/bolt-on-hub-for-taper-bush-2012-outside-diameter-270mm-material-cast-iron-sku-14090136/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 2012 outside diameter 145mm material cast iron SKU: 14090135](https://maedler.in/product/bolt-on-hub-for-taper-bush-2012-outside-diameter-145mm-material-cast-iron-sku-14090135/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron SKU: 14090130](https://maedler.in/product/bolt-on-hub-for-taper-bush-1615-outside-diameter-200mm-material-cast-iron-sku-14090130/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 1610 outside diameter 130mm material cast iron SKU: 14090125](https://maedler.in/product/bolt-on-hub-for-taper-bush-1610-outside-diameter-130mm-material-cast-iron-sku-14090125/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 1210 outside diameter 180mm material cast iron SKU: 14090121](https://maedler.in/product/bolt-on-hub-for-taper-bush-1210-outside-diameter-180mm-material-cast-iron-sku-14090121/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Bolt-on hub for taper bush 1210 outside diameter 120mm material cast iron SKU: 14090120](https://maedler.in/product/bolt-on-hub-for-taper-bush-1210-outside-diameter-120mm-material-cast-iron-sku-14090120/): Material: Grey cast iron GG25. Product no. 14090147 from steel.Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. The wheel must get a center hole Ø D (recommended tolerance: H8) and bores for mounting bolts. It can be mounted on the right side or left side. The bolt length depends on the wheel width. Bolts and nuts are not included. The wheel and the taper bush have to be ordered separately.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Welding hub for taper bush 5050 outside diameter 276mm material steel SKU: 14090113](https://maedler.in/product/welding-hub-for-taper-bush-5050-outside-diameter-276mm-material-steel-sku-14090113/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 4545 outside diameter 254mm material steel SKU: 14090112](https://maedler.in/product/welding-hub-for-taper-bush-4545-outside-diameter-254mm-material-steel-sku-14090112/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 4040 outside diameter 225mm material steel SKU: 14090111](https://maedler.in/product/welding-hub-for-taper-bush-4040-outside-diameter-225mm-material-steel-sku-14090111/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 3535 outside diameter 184mm material steel SKU: 14090110](https://maedler.in/product/welding-hub-for-taper-bush-3535-outside-diameter-184mm-material-steel-sku-14090110/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 3525 outside diameter 184mm material steel SKU: 14090109](https://maedler.in/product/welding-hub-for-taper-bush-3525-outside-diameter-184mm-material-steel-sku-14090109/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 3030 outside diameter 152mm material steel SKU: 14090108](https://maedler.in/product/welding-hub-for-taper-bush-3030-outside-diameter-152mm-material-steel-sku-14090108/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 3020 outside diameter 152mm material steel SKU: 14090107](https://maedler.in/product/welding-hub-for-taper-bush-3020-outside-diameter-152mm-material-steel-sku-14090107/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 2517 outside diameter 127mm material steel SKU: 14090106](https://maedler.in/product/welding-hub-for-taper-bush-2517-outside-diameter-127mm-material-steel-sku-14090106/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 2012 outside diameter 96mm material steel SKU: 14090105](https://maedler.in/product/welding-hub-for-taper-bush-2012-outside-diameter-96mm-material-steel-sku-14090105/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 1615 outside diameter 83mm material steel SKU: 14090104](https://maedler.in/product/welding-hub-for-taper-bush-1615-outside-diameter-83mm-material-steel-sku-14090104/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 1610 outside diameter 83mm material steel SKU: 14090103](https://maedler.in/product/welding-hub-for-taper-bush-1610-outside-diameter-83mm-material-steel-sku-14090103/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 1215 outside diameter 76mm material steel SKU: 14090102](https://maedler.in/product/welding-hub-for-taper-bush-1215-outside-diameter-76mm-material-steel-sku-14090102/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Welding hub for taper bush 1210 outside diameter 73mm material steel SKU: 14090101](https://maedler.in/product/welding-hub-for-taper-bush-1210-outside-diameter-73mm-material-steel-sku-14090101/): Material: Steel (St52 or comparable), good weldable. Hub for fixing a chain plate wheel or similar parts with a low priced taper bush onto a shaft. Taper bush and chain plate wheel have to be ordered separately. Recommended bore tolerance: H8. Before welding, a taper bush should be mounted with a piece of shaft into the welding hub to avoid deforming by heat. Other sizes for taper bushes up to type 5050 are available at short delivery time. In this youtube video we show the mounting and demounting of taper bushes:Video clip (3.5 Minutes) - [Chain puller 16 B to 63mm pitch 1" - max. 63mm with turn lever SKU: 14072200](https://maedler.in/product/chain-puller-16-b-to-63mm-pitch-1-max-63mm-with-turn-lever-sku-14072200/): Product No. 140 721 00 for chains up to 12 B, with knob. Product No. 140 722 00 for chains from 16 B, with turn lever. Can also be used for similar sizes of other standards and for double-strand and triple-strand chains . - [Chain puller 081 - 12 B pitch 1/2" up to 3/4"x 7/16" with knob SKU: 14072100](https://maedler.in/product/chain-puller-081-12-b-pitch-1-2-up-to-3-4x-7-16-with-knob-sku-14072100/): Product No. 140 721 00 for chains up to 12 B, with knob. Product No. 140 722 00 for chains from 16 B, with turn lever. Can also be used for similar sizes of other standards and for double-strand and triple-strand chains . - [Replacement pin for chain breaker 1" part-no. 14070800 SKU: 14071800](https://maedler.in/product/replacement-pin-for-chain-breaker-1-part-no-14070800-sku-14071800/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Replacement pin for chain breaker 5/8" - 3/4" part-no. 14070700 SKU: 14071700](https://maedler.in/product/replacement-pin-for-chain-breaker-5-8-3-4-part-no-14070700-sku-14071700/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Replacement pin for chain breaker 1/2" part-no. 14070500 SKU: 14071500](https://maedler.in/product/replacement-pin-for-chain-breaker-1-2-part-no-14070500-sku-14071500/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Replacement pin for chain breaker 3/8" part-no. 14070300 SKU: 14071300](https://maedler.in/product/replacement-pin-for-chain-breaker-3-8-part-no-14070300-sku-14071300/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Chain breaker 16 B-1, pitch 1" SKU: 14070800](https://maedler.in/product/chain-breaker-16-b-1-pitch-1-sku-14070800/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Chain breaker 10 B-1 to 12 B-2, pitch 5/8" - 3/4" SKU: 14070700](https://maedler.in/product/chain-breaker-10-b-1-to-12-b-2-pitch-5-8-3-4-sku-14070700/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Chain breaker 081 to 08 B-2 pitch 1/2 " SKU: 14070500](https://maedler.in/product/chain-breaker-081-to-08-b-2-pitch-1-2-sku-14070500/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [Chain breaker 06 B pitch 3/8 " SKU: 14070300](https://maedler.in/product/chain-breaker-06-b-pitch-3-8-sku-14070300/): Ordering Details: e.g.: Product No. 140 703 00, Chain Breaker 06 B and / or Product No. 140 713 00, Replacement Pin 06 B. - [CRC Inox Kleen 20720-AU Cleaner for stainless steel with NSF C1/A7 registration food processing safe SKU: 14070269](https://maedler.in/product/crc-inox-kleen-20720-au-cleaner-for-stainless-steel-with-nsf-c1-a7-registration-food-processing-safe-sku-14070269/): CRC® Stainless Steel Cleaner Spray is a water-based foam cleaner with a glossy effect for stainless steel, aluminium and chrome. • NSF registration for use in the food industry  (category A7 - NSF-reg.-Nr.142307). • removes dirt, marks and water stains. • glossy surface after application. Attention H222 Extremely flammable aerosol. H319 Causes serious eye irritation. - [CRC Industrial Eco Degreaser 33344-AA Powerful degreaser and cleaner with NSF K1/A8 registration food processing safe SKU: 14070265](https://maedler.in/product/crc-industrial-eco-degreaser-33344-aa-powerful-degreaser-and-cleaner-with-nsf-k1-a8-registration-food-processing-safe-sku-14070265/): CRC® Industrial ECO Degreaser penetrates and removes grease, oil, lubricants, tar, adhesives and other contaminations. • NSF registration for use in the food industry  (category A8 - NSF-reg.-Nr. 162737). • universally applicable in all industrial areas. • Without residues after drying. • biodegradable. • well compatible with most plastics. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. - [CRC ECO Leak Finder 10732-AI Gas leak detector water based 500ml with NSF P1 registration food processing safe SKU: 14070260](https://maedler.in/product/crc-eco-leak-finder-10732-ai-gas-leak-detector-water-based-500ml-with-nsf-p1-registration-food-processing-safe-sku-14070260/): CRC® ECO Leak Finder is a water-based test liquid for gas and compressed air systems of all types, which forms clearly visible foam bubbles at the gas leak. • NSF registration for use in the food industry (category P1 - NSF-reg.-Nr. 142801). • requirements according to DIN EN 14291. • degradability according to OECD 301B: 31%. • Temperature range: 0°C to +50°C. Attention H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. - [CRC 3-36 10110-AU Lubrication and corrosion protection 500ml with NSF H2 registration food processing safe SKU: 14070257](https://maedler.in/product/crc-3-36-10110-au-lubrication-and-corrosion-protection-500ml-with-nsf-h2-registration-food-processing-safe-sku-14070257/): CRC® 3-36 Spray is an universal corrosion protection and lubricating oil for metal surfaces of all kinds. • NSF registration for use in the food industry  (category H2 - NSF-reg.-Nr. 139736). • good creeping and lubricating properties. • displaces moisture. • for inner bearing protection up to 6 months. • Temperature range: -50°C to +120°C. Attention H223 Flammable aerosol. H229 Pressurised container: May burst if heated. - [CRC Extreme Lube 32603-AA High pressure lubricant 500ml with NSF H1 registration food processing safe SKU: 14070255](https://maedler.in/product/crc-extreme-lube-32603-aa-high-pressure-lubricant-500ml-with-nsf-h1-registration-food-processing-safe-sku-14070255/): CRC® Extreme Lube-Spray is a high pressure synthetic grease for use in direct food processing applications. • NSF registration for use in the food industry  (category H1 - NSF-reg.-Nr. 143143). • high water resistance. • good material compatibility. • NLGI class 2. • 2-way spray head (spot/area). • Temperature range: -40°C to +180°C. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects. - [CRC Food Grease 32317-AA Multipurpose grease 500ml with NSF H1 registration food processing safe SKU: 14070253](https://maedler.in/product/crc-food-grease-32317-aa-multipurpose-grease-500ml-with-nsf-h1-registration-food-processing-safe-sku-14070253/): CRC® Food Grease-Spray is an universal long-life grease for food processing technology for the lubrication of bearings, gears and guides. • NSF registration for use in the food industry  (category H1 - NSF-reg.-Nr. 139907). • colourless. • silicone-free. • 2-way-sprayer (precision or wide straw). • Temperature range: -40°C to +140°C. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H412 Harmful to aquatic life with long lasting effects. - [CRC Multi Oil 32605-AA General purpose lubricant 500ml with NSF H1 registration food processing safe SKU: 14070251](https://maedler.in/product/crc-multi-oil-32605-aa-general-purpose-lubricant-500ml-with-nsf-h1-registration-food-processing-safe-sku-14070251/): CRC® Multifunctional oil spray is an universal creeping and lubricating oil for the food industry. • NSF registration for use in the food industry  (category H1 - NSF-reg.-Nr. 017048). • good creeping and lubricating properties. • loosens stiff screw connections. • odourless and silicone-free. • 2-way-sprayer (precision or wide straw). • Temperature range: -18°C to +120°C. Danger H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. - [OKS 2661 Fast Cleaner Spray 600ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070238](https://maedler.in/product/oks-2661-fast-cleaner-spray-600ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070238/): OKS 2661 - Fast Cleaner Spray for residue-free cleaning of machine parts and material surfaces.• suitable for degreasing and cleaning.• highly effective due to cleansing active ingredients.• solvent-based cleaner.• fast and residue-free evaporation.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [OKS 1361 Silicone Separator NSF H1 Spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070237](https://maedler.in/product/oks-1361-silicone-separator-nsf-h1-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070237/): OKS 1361 - Silicone Separator Spray can be used as a separating agent in casting, injection moulding and extrusion processes of plastics and elastomers.• release for the food processing industry. (Category H1 - NSF Reg. No 129481)• water repellent and weather resistant.• MOSH/MOAH free.• temperature range: -50°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated. - [OKS 1110 Multi-Silicone Grease NSF H1 Tube 80ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070236](https://maedler.in/product/oks-1110-multi-silicone-grease-nsf-h1-tube-80ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070236/): OKS 1110 for use as an adhesive, transparent silicone grease for fittings, seals and plastic parts.• release for the food processing industry. (Category H1 - NSF Reg. No 124381)• resistant to hot and cold water, acetone, ethanol, ethylene glycol, glycerine and methanol.• MOSH/MOAH free.• NLGI-Class: 3.• temperature range: -40°C to +200°C. - [OKS 252 White High-Temperature Paste for Food Processing Technology Brush tin 250g (Actual safety data sheet on the internet in the section Downloads) SKU: 14070235](https://maedler.in/product/oks-252-white-high-temperature-paste-for-food-processing-technology-brush-tin-250g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070235/): OKS 252 for the lubrication of highly loaded sliding surfaces, at low sliding speeds or oscillating movements.• good water resistance.• good corrosion protection.• Release for the food processing industry (Category H1 - NSF Reg. No 135748).• MOSH/MOAH and metal-free.• Temperature range: -30°C to +160°C (as release paste up to +1200ºC). - [OKS 250 White Allround Paste, metal-free Brush tin 250g (Actual safety data sheet on the internet in the section Downloads) SKU: 14070234](https://maedler.in/product/oks-250-white-allround-paste-metal-free-brush-tin-250g-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070234/): OKS 250 for the lubrication of highly loaded sliding surfaces, at low sliding speeds or oscillating movements.• resistant to hot and cold water.• very good corrosion protection.• free of metal.• release for the food processing industry (Category H2 - NSF Reg. No 131379).• temperature range: -40°C to +200°C (as separating paste to +1400ºC).DangerH315 Causes skin irritation.H318 Causes serious eye damage.H410 Very toxic to aquatic life with long lasting effects. - [OKS 221 MoS2 Rapid Paste Spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070233](https://maedler.in/product/oks-221-mos2-rapid-paste-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070233/): OKS 221 - Spray as assembly paste with very high MoS2-Concentration for pressing and forming processes as well as running-in lubrication of highly loaded sliding surfaces.• protects against wear and sliding.• no working into the sliding surface required.• lowest friction with highest load capacity.• good emergency running properties.• VKA test (welding force): 4,200 N.• temperature range: -35°C to +450°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H318 Causes serious eye damage.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [OKS 391 Cutting Oil for all metals Spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070232](https://maedler.in/product/oks-391-cutting-oil-for-all-metals-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070232/): OKS 391 - Cutting Oil Spray for drip lubrication of cutting tools during machining operations, e.g. drilling, thread cutting, sawing, milling and stamping.• reduces friction and effort.• permits high continuous loads and higher cutting speeds.• enables optimum cutting surfaces.• extends tool life through wear reduction.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated. - [OKS 371 Universal Oil for Food Processing Technology NSF H1 Spray 400ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070231](https://maedler.in/product/oks-371-universal-oil-for-food-processing-technology-nsf-h1-spray-400ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070231/): OKS 371 - Universal Oil Spray can be used as a rust remover, contact agent, corrosion protection and care product.• very effective due good creeping properties.• release for the food processing industry. (Category H1 - NSF Reg. No 124384)• versatile application possibilities.• water displacing.• viscosity 14 mm²/s at +40 °C.• temperature range: -10°C to +180°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways. - [Caramba Intensive Stainless Steel Cleaner NSF A7 Spray 500ml 63308401 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070188](https://maedler.in/product/caramba-intensive-stainless-steel-cleaner-nsf-a7-spray-500ml-63308401-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070188/): Caramba Stainless Steel Cleaner Spray cleans and protects all metal surfaces.• protects against dirt and tarnishing.• release for the food processing industry. (Category A7 - NSF Reg. No. 139339)• removes dirt, lime stains, flash rust, grease, oils and resins.• effective on stainless steel, aluminium, copper and brass.• optimum protection against tarnishing.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H412 Harmful to aquatic life with long lasting effects. - [Caramba Intensive Cold Spray 500ml 690019 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070187](https://maedler.in/product/caramba-intensive-cold-spray-500ml-690019-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070187/): Caramba Cold Spray facilitates the pressing of metal components such as ball bearings, bushings, chain links, shafts, etc. into tight fits. Can also be used for troubleshooting in electronic areas and for repair purposes in industry.• versatile use.• fast cooling up to -40°C.• risk of frostbite at body contact.• residue-free evaporation.Danger H220 Extremely flammable gas.H229 Pressurised container: May burst if heated. - [Caramba High Performance Silicone Spray 500ml 6103051 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070186](https://maedler.in/product/caramba-high-performance-silicone-spray-500ml-6103051-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070186/): Caramba Silicone Spray is a multifunctional lubricant and care product for metal, plastic and rubber.• lubricates and maintains.• release for the food processing industry. (Category H2 - NSF Reg. No. 142272)• colourless and low odour, no staining.• high water resistance prevents unwanted icing.• temperature range: -30°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [Caramba High Performance Copper Paste Cartridge 200ml 60268176 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070185](https://maedler.in/product/caramba-high-performance-copper-paste-cartridge-200ml-60268176-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070185/): Caramba Copper Paste provides highly effective protective and lubricating coatings on parts exposed to high temperatures.• protects against corrosion, Fixed burning and seizure.• against noise and vibrations.• facilitates installation and removal.• due to its metal content, it is also ideal can also be used as a heat-conducting paste.• temperature range: -30°C to +1.100°C.AttentionH229 Pressurised container: May burst if heated.H319 Causes serious eye irritation.H400 Very toxic to aquatic life.H411 Toxic to aquatic life with long lasting effects. - [Caramba High Performance Chain Spray 500ml 60628501 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070184](https://maedler.in/product/caramba-high-performance-chain-spray-500ml-60628501-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070184/): Caramba Chain Spray is a fully synthetic, colourless chain grease that is optimally suited for chains with high rotation speeds.• extreme lubricity. (VKA-Value: 1900N).• protects against wear and corrosion.• spin-resistant and splash water resistant.• high creep capacity.• suitable for O-, X- und Z-rings.• temperature range: -40°C to +200°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H411 Toxic to aquatic life with long lasting effects. - [Caramba High Performance Wire Rope and Gear Grease Spray 500ml 64540001 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070183](https://maedler.in/product/caramba-high-performance-wire-rope-and-gear-grease-spray-500ml-64540001-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070183/): Caramba High Performance Wire Rope and Gear Grease is a neutral, anthracite-coloured and odourless lubricant for demanding tribological tasks wherever components are subjected to high pressures.• for high loads (VKA-Value: 2100N).• salt and splash water resistant.• optimum adhesion.• prevents surface welding.• temperature range: -30°C to +120°C (emergency lubrication up to +450°C).DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [Caramba High Performance White Spray Grease 500ml 6071851 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070182](https://maedler.in/product/caramba-high-performance-white-spray-grease-500ml-6071851-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070182/): Caramba High Performance White Spray Grease for lubrication and corrosion protection of all types of heavily stressed parts.• corrosion-protective.• for high loads (VKA-Value: 1400N).• very good creep ability.• extremely spin-off resistant and water resistant.• optimum lubrication of hard-to-reach places.• temperature range: -30°C to +150°C (Emergency Lubrication by PTFE up to +250°C).DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [Caramba Super Multi-Use-Spray 500ml 6612011 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070181](https://maedler.in/product/caramba-super-multi-use-spray-500ml-6612011-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070181/): Caramba Multi-Use-Oil can be used as a rust remover, contact agent, corrosion protection and metal care product.• very good lubricating properties.• high moisture displacement and good corrosion protection.• excellent creeping properties.• well suited as a rust remover.• silicone and resin-free.• temperature range: -40°C to +180°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H412 Harmful to aquatic life with long lasting effects. - [BALLISTOL Universal- & Plastic Cleaner 750ml 25075 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070170](https://maedler.in/product/ballistol-universal-plastic-cleaner-750ml-25075-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070170/): BALLISTOL Universal & Plastic Cleaner for powerful cleaning.• high dirt dissolving power for grease and oil.• no wiping with water necessary.• removes 99.9% of bacteria.• short reaction time.• has an antistatic effect.• dust and dirt repellent.• gentle on materials.• silicone-free, solvent-free. - [BALLISTOL Multi-Purpose Grease cartridge 400g 25350 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070169](https://maedler.in/product/ballistol-multi-purpose-grease-cartridge-400g-25350-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070169/): BALLISTOL Multi-Purpose Grease for use in the lubrication of sliding and roller bearings.• silicone-, PTFE-, acid- and resin-free.• very good water resistance.• reliable long-term lubrication.• good sealing behaviour.• recommended for central lubrication systems.• complies with DIN 51825: KP 2 K-30 & ISO 6743-9: ISO-L-XCCHB 2.• temperature range: -35°C to +130°C. - [BALLISTOL Garage-Oil Spray 400ml 22960 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070168](https://maedler.in/product/ballistol-garage-oil-spray-400ml-22960-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070168/): BALLISTOL Garage-Oil-Spray is ideal for the maintenance and care of machines and equipment of all kinds.• silicone-, PTFE-, acid- and resin-free.• effortlessly removes flash rust and cleans from foreign particles.• keeps moving parts running smoothly.• protects iron, steel and non-ferrous metals from rust and corrosion.• Tested according to DIN 50 021-SS (salt chamber spray test).DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H412 Harmful to aquatic life with long lasting effects. - [BALLISTOL Teflon-Spray 400ml 25607 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070167](https://maedler.in/product/ballistol-teflon-spray-400ml-25607-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070167/): BALLISTOL Teflon™-Spray on PTFE-basis for a consistent and durable lubrication and sliding activity without oil or grease content.• silicone-, acid- and resin-free.• clean dry lubrication without adhering dirt and oily hands.• effective reduction of static, sliding and rolling friction.• no annoying lubricant sludge.• hygienic, clean and nature-friendly.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H319 Causes serious eye irritation. - [BALLISTOL Silicone-Oil Spray 400ml 25307 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070166](https://maedler.in/product/ballistol-silicone-oil-spray-400ml-25307-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070166/): BALLISTOL Silicone-Oil-Spray for the lubrication and protection of parts made of rubber, plastic and metal.Typical applications: Plastic gears, plastic bearings, rubber bearings, cable pulls, guide rails, guides, rollers, slideways.• PTFE-, acid- and resin-free.• very economical with a high silicone content.• lubrication free of mineral oil.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [BALLISTOL Premium Rust Protection Oil Spray 400ml 25261 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070165](https://maedler.in/product/ballistol-premium-rust-protection-oil-spray-400ml-25261-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070165/): BALLISTOL Premium Rust Protection Oil Spray is used for the care, maintenance and protection of machines, equipment, precision tools, measuring instruments, moulds and stamping presses.• silicone-, PTFE-, acid- and resin-free.• ideal for long-term preservation in high atmospheric humidity and aggressive ambient air.• protects against rust for a long time.• displaces moisture.• temperature range: -40°C to +150°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H412 Harmful to aquatic life with long lasting effects. - [BALLISTOL Copper-Graphite-Spray 200ml 25200 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070164](https://maedler.in/product/ballistol-copper-graphite-spray-200ml-25200-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070164/): BALLISTOL Copper-Graphite-Spray facilitates assembly and prevents seizing and jamming of components.• silicone-, PTFE-, acid- and resin-free.• reliably prevents seizing.• reduces friction losses.• ideal for threads and fits.• prevents contact corrosion with different metals.• temperature range: –50°C to +1,000°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H412 Harmful to aquatic life with long lasting effects. - [BALLISTOL Universal Oil VarioFlex 350ml 21727 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070163](https://maedler.in/product/ballistol-universal-oil-varioflex-350ml-21727-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070163/): BALLISTOL Universal Oil Spray cleans, maintains and protects. The capillary tube with memory effect can be bent individually.• extremely creepable.• sliding active.• completely biodegradable.• food safe.• skin-compatible.• completely harmless according to §§ 30,31 LFGB and EG Regulation No. 1935/2004.DangerH222 Extremely flammable gas.H229 Pressurised container: May burst if heated. - [BALLISTOL Universal Oil Spray 400ml 21810 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070162](https://maedler.in/product/ballistol-universal-oil-spray-400ml-21810-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070162/): BALLISTOL Universal Oil Spray cleans, maintains, protects, preserves, dissolves unwanted residues and provides rust protection without gumming up.• extremely creepable.• sliding active.• completely biodegradable.• food safe.• skin-compatible.• completely harmless according to §§ 30,31 LFGB and EG Regulation No. 1935/2004.DangerH222 Extremely flammable gas.H229 Pressurised container: May burst if heated. - [BALLISTOL Universal Oil Liquid 500ml 21150 (Actual safety data sheet on the internet in the section Downloads) SKU: 14070161](https://maedler.in/product/ballistol-universal-oil-liquid-500ml-21150-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070161/): BALLISTOL Universal Oil cleans, maintains, protects, preserves, dissolves unwanted residues and provides rust protection without gumming up.• extremely creepable.• sliding active.• completely biodegradable.• food safe.• skin-compatible.• completely harmless according to §§ 30,31 LFGB and EG Regulation No. 1935/2004. - [WD-40 SPECIALIST Degreaser 500ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070155](https://maedler.in/product/wd-40-specialist-degreaser-500ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070155/): The special spray removes grease, oil, dirt and soot. This product is particularly suitable for metals. Spray head can be adjusted for area or spot spraying.• cleans equipment to make it run smoother and last longer.• works immediately on contact.• easy to rinse and leaves no residue.• can be used on a variety of surfaces, including metal.• extremely flammable.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 SPECIALIST Brake Cleaner Spray 500ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070154](https://maedler.in/product/wd-40-specialist-brake-cleaner-spray-500ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070154/): The special spray effectively removes grease, oil, dirt and deposits from brakes, clutch, gearbox and other components.• residue-free.• works immediately:• powerful spray.• extremely flammable.• for use at room temperature.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H315 Causes skin irritation.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Lock Lube 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070152](https://maedler.in/product/wd-40-specialist-lock-lube-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070152/): The special spray has been specially developed for the maintenance of all types of locking cylinders.• penetrates and dissolves.• lubricates and protects.• prevents wear.• temperature range: -70°C to +150°C.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness. - [WD-40 SPECIALIST Contact Cleaner 400ml Smart Straw (Actual safety data sheet on the internet in the section Downloads) SKU: 14070151](https://maedler.in/product/wd-40-specialist-contact-cleaner-400ml-smart-straw-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070151/): Special Spray that cleans oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment. Spray head (only 400 ml) can be adjusted for area or spot spraying.• fast active non conductive cleaner.• penetrates quickly and leaves no residue.• penetrates in those hard to reach areas.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [WD-40 SPECIALIST Contact Cleaner 100ml (Actual safety data sheet on the internet in the section Downloads) SKU: 14070150](https://maedler.in/product/wd-40-specialist-contact-cleaner-100ml-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-14070150/): Special Spray that cleans oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment. Spray head (only 400 ml) can be adjusted for area or spot spraying.• fast active non conductive cleaner.• penetrates quickly and leaves no residue.• penetrates in those hard to reach areas.DangerH222 Extremely flammable aerosol.H229 Pressurised container: May burst if heated.H304 May be fatal if swallowed and enters airways.H315 Causes skin irritation.H319 Causes serious eye irritation.H336 May cause drowsiness or dizziness.H411 Toxic to aquatic life with long lasting effects. - [Cylindrical Clamping lever M20 steel zinc-plated SKU: 66542000](https://maedler.in/product/cylindrical-clamping-lever-m20-steel-zinc-plated-sku-66542000/): Material: Steel zinc plated, glossy, or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Cylindrical Clamping lever M16 steel zinc-plated SKU: 66541600](https://maedler.in/product/cylindrical-clamping-lever-m16-steel-zinc-plated-sku-66541600/): Material: Steel zinc plated, glossy, or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Cylindrical Clamping lever M12 steel zinc-plated SKU: 66541200](https://maedler.in/product/cylindrical-clamping-lever-m12-steel-zinc-plated-sku-66541200/): Material: Steel zinc plated, glossy, or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Cylindrical Clamping lever M10 steel zinc-plated SKU: 66541000](https://maedler.in/product/cylindrical-clamping-lever-m10-steel-zinc-plated-sku-66541000/): Material: Steel zinc plated, glossy, or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Cylindrical Clamping lever M8 steel zinc-plated SKU: 66540800](https://maedler.in/product/cylindrical-clamping-lever-m8-steel-zinc-plated-sku-66540800/): Material: Steel zinc plated, glossy, or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Clamping lever 202 TG diameter 40mm material malleable cast iron SKU: 66532000](https://maedler.in/product/clamping-lever-202-tg-diameter-40mm-material-malleable-cast-iron-sku-66532000/): Material: Cast steel. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever 202 TG diameter 32mm material malleable cast iron SKU: 66531600](https://maedler.in/product/clamping-lever-202-tg-diameter-32mm-material-malleable-cast-iron-sku-66531600/): Material: Cast steel. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever 202 TG diameter 25mm material malleable cast iron SKU: 66531200](https://maedler.in/product/clamping-lever-202-tg-diameter-25mm-material-malleable-cast-iron-sku-66531200/): Material: Cast steel. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever 202 TG diameter 20mm material malleable cast iron SKU: 66531000](https://maedler.in/product/clamping-lever-202-tg-diameter-20mm-material-malleable-cast-iron-sku-66531000/): Material: Cast steel. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever 202 TG diameter 16mm material malleable cast steel SKU: 66530800](https://maedler.in/product/clamping-lever-202-tg-diameter-16mm-material-malleable-cast-steel-sku-66530800/): Material: Cast steel. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever DIN 99 made from steel type N ball diameter 50mm SKU: 66512400](https://maedler.in/product/clamping-lever-din-99-made-from-steel-type-n-ball-diameter-50mm-sku-66512400/): Material: Steel, black oxide finish. Handle slanted, with metric thread. - [Clamping lever DIN 99 made from steel type N ball diameter 40mm SKU: 66512000](https://maedler.in/product/clamping-lever-din-99-made-from-steel-type-n-ball-diameter-40mm-sku-66512000/): Material: Steel, black oxide finish. Handle slanted, with metric thread. - [Clamping lever DIN 99 made from steel type N ball diameter 32mm SKU: 66511600](https://maedler.in/product/clamping-lever-din-99-made-from-steel-type-n-ball-diameter-32mm-sku-66511600/): Material: Steel, black oxide finish. Handle slanted, with metric thread. - [Clamping lever DIN 99 made from steel type N ball diameter 25mm SKU: 66511200](https://maedler.in/product/clamping-lever-din-99-made-from-steel-type-n-ball-diameter-25mm-sku-66511200/): Material: Steel, black oxide finish. Handle slanted, with metric thread. - [Clamping lever DIN 99 - 80 - M10 steel type N ball diameter 20mm SKU: 66511000](https://maedler.in/product/clamping-lever-din-99-80-m10-steel-type-n-ball-diameter-20mm-sku-66511000/): Material: Steel, black oxide finish. Handle slanted, with metric thread. - [Clamping lever DIN 99 made from steel type N ball diameter 16mm SKU: 66510800](https://maedler.in/product/clamping-lever-din-99-made-from-steel-type-n-ball-diameter-16mm-sku-66510800/): Material: Steel, black oxide finish. Handle slanted, with metric thread. - [Clamping lever DIN 99 made from steel type N ball diameter 12mm SKU: 66510600](https://maedler.in/product/clamping-lever-din-99-made-from-steel-type-n-ball-diameter-12mm-sku-66510600/): Material: Steel, black oxide finish. Handle slanted, with metric thread. - [Ball knob DIN319 version C made from stainless steel ball diameter 32mm thread M8 SKU: 66499432](https://maedler.in/product/ball-knob-din319-version-c-made-from-stainless-steel-ball-diameter-32mm-thread-m8-sku-66499432/): Material: Stainless steel 1.4305 (AISI 303), matt blasted. Version C = With thread. - [Ball knob DIN319 version C made from stainless steel ball diameter 25mm thread M6 SKU: 66499425](https://maedler.in/product/ball-knob-din319-version-c-made-from-stainless-steel-ball-diameter-25mm-thread-m6-sku-66499425/): Material: Stainless steel 1.4305 (AISI 303), matt blasted. Version C = With thread. - [Ball knob DIN319 version C made from stainless steel ball diameter 20mm thread M5 SKU: 66499420](https://maedler.in/product/ball-knob-din319-version-c-made-from-stainless-steel-ball-diameter-20mm-thread-m5-sku-66499420/): Material: Stainless steel 1.4305 (AISI 303), matt blasted. Version C = With thread. - [Ball knob DIN319 version C made from stainless steel ball diameter 16mm thread M4 SKU: 66499416](https://maedler.in/product/ball-knob-din319-version-c-made-from-stainless-steel-ball-diameter-16mm-thread-m4-sku-66499416/): Material: Stainless steel 1.4305 (AISI 303), matt blasted. Version C = With thread. - [Ball knob DIN 319 Technopolymer PA6GV type E ø32 M10 SKU: 66483210](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-e-o32-m10-sku-66483210/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version E = With threaded bush of zinc-plated steel.             Size 20/M6, 25/M8 and 32/M10 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type E ø32 M8 SKU: 66483208](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-e-o32-m8-sku-66483208/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version E = With threaded bush of zinc-plated steel.             Size 20/M6, 25/M8 and 32/M10 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type E ø25 M8 SKU: 66482508](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-e-o25-m8-sku-66482508/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version E = With threaded bush of zinc-plated steel.             Size 20/M6, 25/M8 and 32/M10 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type E ø25 M6 SKU: 66482506](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-e-o25-m6-sku-66482506/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version E = With threaded bush of zinc-plated steel.             Size 20/M6, 25/M8 and 32/M10 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type E ø20 M6 SKU: 66482006](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-e-o20-m6-sku-66482006/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version E = With threaded bush of zinc-plated steel.             Size 20/M6, 25/M8 and 32/M10 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type E ø20 M5 SKU: 66482005](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-e-o20-m5-sku-66482005/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version E = With threaded bush of zinc-plated steel.             Size 20/M6, 25/M8 and 32/M10 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø40 M12 SKU: 66474012](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o40-m12-sku-66474012/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø40 M10 SKU: 66474010](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o40-m10-sku-66474010/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø32 M10 SKU: 66473210](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o32-m10-sku-66473210/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø32 M8 SKU: 66473208](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o32-m8-sku-66473208/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø25 M8 SKU: 66472508](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o25-m8-sku-66472508/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø25 M6 SKU: 66472506](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o25-m6-sku-66472506/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø20 M6 SKU: 66472006](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o20-m6-sku-66472006/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø20 M5 SKU: 66472005](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o20-m5-sku-66472005/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø16 M5 SKU: 66471605](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o16-m5-sku-66471605/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN 319 Technopolymer PA6GV type C ø16 M4 SKU: 66471604](https://maedler.in/product/ball-knob-din-319-technopolymer-pa6gv-type-c-o16-m4-sku-66471604/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version C = With compression-moulded thread.Size 16/M5, 20/M6, 25/M8, 32/M10 and 40/M12 is not part of the DIN 319. - [Ball knob DIN319 version C made from aluminium ball diameter 50mm thread M12 SKU: 66466450](https://maedler.in/product/ball-knob-din319-version-c-made-from-aluminium-ball-diameter-50mm-thread-m12-sku-66466450/): Material: Aluminium, polished. Version C = With thread. - [Ball knob DIN319 version C made from aluminium ball diameter 40mm thread M10 SKU: 66466440](https://maedler.in/product/ball-knob-din319-version-c-made-from-aluminium-ball-diameter-40mm-thread-m10-sku-66466440/): Material: Aluminium, polished. Version C = With thread. - [Ball knob DIN319 version C made from aluminium ball diameter 32mm thread M8 SKU: 66466432](https://maedler.in/product/ball-knob-din319-version-c-made-from-aluminium-ball-diameter-32mm-thread-m8-sku-66466432/): Material: Aluminium, polished. Version C = With thread. - [Ball knob DIN319 version C made from aluminium ball diameter 25mm thread M6 SKU: 66466425](https://maedler.in/product/ball-knob-din319-version-c-made-from-aluminium-ball-diameter-25mm-thread-m6-sku-66466425/): Material: Aluminium, polished. Version C = With thread. - [Ball knob DIN319 version C made from aluminium ball diameter 20mm thread M5 SKU: 66466420](https://maedler.in/product/ball-knob-din319-version-c-made-from-aluminium-ball-diameter-20mm-thread-m5-sku-66466420/): Material: Aluminium, polished. Version C = With thread. - [Ball knob DIN319 version C made from aluminium ball diameter 16mm thread M4 SKU: 66466416](https://maedler.in/product/ball-knob-din319-version-c-made-from-aluminium-ball-diameter-16mm-thread-m4-sku-66466416/): Material: Aluminium, polished. Version C = With thread. - [Ball knob similar DIN 319 made of rubber NBR ø40mm with zinc plated steel insert M12 SKU: 66454012](https://maedler.in/product/ball-knob-similar-din-319-made-of-rubber-nbr-o40mm-with-zinc-plated-steel-insert-m12-sku-66454012/): Material: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Version E = With threaded bush of zinc-plated steel.Versatile, vibration damping knob, from oil-resistant NBR.Temperature range: -10°C to +100ºC. - [Ball knob similar DIN 319 made of rubber NBR ø40mm with zinc plated steel insert M10 SKU: 66454010](https://maedler.in/product/ball-knob-similar-din-319-made-of-rubber-nbr-o40mm-with-zinc-plated-steel-insert-m10-sku-66454010/): Material: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Version E = With threaded bush of zinc-plated steel.Versatile, vibration damping knob, from oil-resistant NBR.Temperature range: -10°C to +100ºC. - [Ball knob similar DIN 319 made of rubber NBR ø32mm with zinc plated steel insert M10 SKU: 66453210](https://maedler.in/product/ball-knob-similar-din-319-made-of-rubber-nbr-o32mm-with-zinc-plated-steel-insert-m10-sku-66453210/): Material: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Version E = With threaded bush of zinc-plated steel.Versatile, vibration damping knob, from oil-resistant NBR.Temperature range: -10°C to +100ºC. - [Ball knob similar DIN 319 made of rubber NBR ø32mm with zinc plated steel insert M8 SKU: 66453208](https://maedler.in/product/ball-knob-similar-din-319-made-of-rubber-nbr-o32mm-with-zinc-plated-steel-insert-m8-sku-66453208/): Material: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Version E = With threaded bush of zinc-plated steel.Versatile, vibration damping knob, from oil-resistant NBR.Temperature range: -10°C to +100ºC. - [Ball knob similar DIN 319 made of rubber NBR ø25mm with zinc plated steel insert M8 SKU: 66452508](https://maedler.in/product/ball-knob-similar-din-319-made-of-rubber-nbr-o25mm-with-zinc-plated-steel-insert-m8-sku-66452508/): Material: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Version E = With threaded bush of zinc-plated steel.Versatile, vibration damping knob, from oil-resistant NBR.Temperature range: -10°C to +100ºC. - [Ball knob similar DIN 319 made of rubber NBR ø25mm with zinc plated steel insert M6 SKU: 66452506](https://maedler.in/product/ball-knob-similar-din-319-made-of-rubber-nbr-o25mm-with-zinc-plated-steel-insert-m6-sku-66452506/): Material: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Version E = With threaded bush of zinc-plated steel.Versatile, vibration damping knob, from oil-resistant NBR.Temperature range: -10°C to +100ºC. - [Ball knob similar DIN 319 made of rubber NBR ø20mm with zinc plated steel insert M6 SKU: 66452006](https://maedler.in/product/ball-knob-similar-din-319-made-of-rubber-nbr-o20mm-with-zinc-plated-steel-insert-m6-sku-66452006/): Material: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Version E = With threaded bush of zinc-plated steel.Versatile, vibration damping knob, from oil-resistant NBR.Temperature range: -10°C to +100ºC. - [Ball knob similar DIN 319 made of rubber NBR ø20mm with zinc plated steel insert M5 SKU: 66452005](https://maedler.in/product/ball-knob-similar-din-319-made-of-rubber-nbr-o20mm-with-zinc-plated-steel-insert-m5-sku-66452005/): Material: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Version E = With threaded bush of zinc-plated steel.Versatile, vibration damping knob, from oil-resistant NBR.Temperature range: -10°C to +100ºC. - [Ball knob similar DIN 319 made of rubber NBR ø16mm with zinc plated steel insert M4 SKU: 66451604](https://maedler.in/product/ball-knob-similar-din-319-made-of-rubber-nbr-o16mm-with-zinc-plated-steel-insert-m4-sku-66451604/): Material: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Version E = With threaded bush of zinc-plated steel.Versatile, vibration damping knob, from oil-resistant NBR.Temperature range: -10°C to +100ºC. - [Ball knob DIN 319 version C made from steel ball diameter 50mm thread M12 SKU: 66445000](https://maedler.in/product/ball-knob-din-319-version-c-made-from-steel-ball-diameter-50mm-thread-m12-sku-66445000/): Material: Steel, polished. Version C = With thread. - [Ball knob DIN 319 version C made from steel ball diameter 40mm thread M10 SKU: 66444000](https://maedler.in/product/ball-knob-din-319-version-c-made-from-steel-ball-diameter-40mm-thread-m10-sku-66444000/): Material: Steel, polished. Version C = With thread. - [Ball knob DIN 319 version C made from steel ball diameter 32mm thread M8 SKU: 66443200](https://maedler.in/product/ball-knob-din-319-version-c-made-from-steel-ball-diameter-32mm-thread-m8-sku-66443200/): Material: Steel, polished. Version C = With thread. - [Ball knob DIN 319 version C made from steel ball diameter 25mm thread M6 SKU: 66442500](https://maedler.in/product/ball-knob-din-319-version-c-made-from-steel-ball-diameter-25mm-thread-m6-sku-66442500/): Material: Steel, polished. Version C = With thread. - [Ball knob DIN 319 version C made from steel ball diameter 20mm thread M5 SKU: 66442000](https://maedler.in/product/ball-knob-din-319-version-c-made-from-steel-ball-diameter-20mm-thread-m5-sku-66442000/): Material: Steel, polished. Version C = With thread. - [Ball knob DIN 319 version C made from steel ball diameter 16mm thread M4 SKU: 66441600](https://maedler.in/product/ball-knob-din-319-version-c-made-from-steel-ball-diameter-16mm-thread-m4-sku-66441600/): Material: Steel, polished. Version C = With thread. - [Ball knob DIN 319 press on type ø40 for shaft diameter 12mm SKU: 66434012](https://maedler.in/product/ball-knob-din-319-press-on-type-o40-for-shaft-diameter-12mm-sku-66434012/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version M = With conical bore.Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 press on type ø40 for shaft diameter 10mm SKU: 66434010](https://maedler.in/product/ball-knob-din-319-press-on-type-o40-for-shaft-diameter-10mm-sku-66434010/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version M = With conical bore.Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 press on type ø32 for shaft diameter 10mm SKU: 66433210](https://maedler.in/product/ball-knob-din-319-press-on-type-o32-for-shaft-diameter-10mm-sku-66433210/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version M = With conical bore.Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 press on type ø32 for shaft diameter 8mm SKU: 66433208](https://maedler.in/product/ball-knob-din-319-press-on-type-o32-for-shaft-diameter-8mm-sku-66433208/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version M = With conical bore.Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 press on type ø25 for shaft diameter 8mm SKU: 66432508](https://maedler.in/product/ball-knob-din-319-press-on-type-o25-for-shaft-diameter-8mm-sku-66432508/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version M = With conical bore.Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 press on type ø25 for shaft diameter 6mm SKU: 66432506](https://maedler.in/product/ball-knob-din-319-press-on-type-o25-for-shaft-diameter-6mm-sku-66432506/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version M = With conical bore.Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 press on type ø20 for shaft diameter 5mm SKU: 66432005](https://maedler.in/product/ball-knob-din-319-press-on-type-o20-for-shaft-diameter-5mm-sku-66432005/): Material PA: Thermoplast (Polyamide PA6 GV), glass-fibre reinforced, impact resistant, black matt.Version M = With conical bore.Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version L made from plastic with tolerance ring ball diameter 50mm for shaft diameter 16mm SKU: 66425000](https://maedler.in/product/ball-knob-din-319-pf-version-l-made-from-plastic-with-tolerance-ring-ball-diameter-50mm-for-shaft-diameter-16mm-sku-66425000/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version L = With clamp bush (tolerance ring).Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version L made from plastic with tolerance ring ball diameter 40mm for shaft diameter 12mm SKU: 66424100](https://maedler.in/product/ball-knob-din-319-pf-version-l-made-from-plastic-with-tolerance-ring-ball-diameter-40mm-for-shaft-diameter-12mm-sku-66424100/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version L = With clamp bush (tolerance ring).Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version L made from plastic with tolerance ring ball diameter 40mm for shaft diameter 10mm SKU: 66424000](https://maedler.in/product/ball-knob-din-319-pf-version-l-made-from-plastic-with-tolerance-ring-ball-diameter-40mm-for-shaft-diameter-10mm-sku-66424000/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version L = With clamp bush (tolerance ring).Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version L made from plastic with tolerance ring ball diameter 32mm for shaft diameter 10mm SKU: 66423300](https://maedler.in/product/ball-knob-din-319-pf-version-l-made-from-plastic-with-tolerance-ring-ball-diameter-32mm-for-shaft-diameter-10mm-sku-66423300/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version L = With clamp bush (tolerance ring).Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version L made from plastic with tolerance ring ball diameter 32mm for shaft diameter 8mm SKU: 66423200](https://maedler.in/product/ball-knob-din-319-pf-version-l-made-from-plastic-with-tolerance-ring-ball-diameter-32mm-for-shaft-diameter-8mm-sku-66423200/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version L = With clamp bush (tolerance ring).Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version L made from plastic with tolerance ring ball diameter 25mm for shaft diameter 8mm SKU: 66422600](https://maedler.in/product/ball-knob-din-319-pf-version-l-made-from-plastic-with-tolerance-ring-ball-diameter-25mm-for-shaft-diameter-8mm-sku-66422600/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version L = With clamp bush (tolerance ring).Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version L made from plastic with tolerance ring ball diameter 25mm for shaft diameter 6mm SKU: 66422500](https://maedler.in/product/ball-knob-din-319-pf-version-l-made-from-plastic-with-tolerance-ring-ball-diameter-25mm-for-shaft-diameter-6mm-sku-66422500/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version L = With clamp bush (tolerance ring).Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version L made from plastic with tolerance ring ball diameter 20mm for shaft diameter 5mm SKU: 66422000](https://maedler.in/product/ball-knob-din-319-pf-version-l-made-from-plastic-with-tolerance-ring-ball-diameter-20mm-for-shaft-diameter-5mm-sku-66422000/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version L = With clamp bush (tolerance ring).Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version L made from plastic with tolerance ring ball diameter 16mm for shaft diameter 4mm SKU: 66421600](https://maedler.in/product/ball-knob-din-319-pf-version-l-made-from-plastic-with-tolerance-ring-ball-diameter-16mm-for-shaft-diameter-4mm-sku-66421600/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version L = With clamp bush (tolerance ring).Recommended shaft tolerance: h9. Shaft d5 is not included in the delivery. - [Ball knob DIN 319 PF version E made from plastic with threaded bush of steel ball diameter 50mm SKU: 66415000](https://maedler.in/product/ball-knob-din-319-pf-version-e-made-from-plastic-with-threaded-bush-of-steel-ball-diameter-50mm-sku-66415000/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version E = With threaded bush of zinc-plated steel.Size 16/M4 threaded bush made from brass.       - [Ball knob DIN 319 PF version E made from plastic with threaded bush of steel ball diameter 40mm SKU: 66414000](https://maedler.in/product/ball-knob-din-319-pf-version-e-made-from-plastic-with-threaded-bush-of-steel-ball-diameter-40mm-sku-66414000/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version E = With threaded bush of zinc-plated steel.Size 16/M4 threaded bush made from brass.       - [Ball knob DIN 319 PF version E made from plastic with threaded bush of steel ball diameter 32mm SKU: 66413200](https://maedler.in/product/ball-knob-din-319-pf-version-e-made-from-plastic-with-threaded-bush-of-steel-ball-diameter-32mm-sku-66413200/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version E = With threaded bush of zinc-plated steel.Size 16/M4 threaded bush made from brass.       - [Ball knob DIN 319 PF version E made from plastic with threaded bush of steel ball diameter 25mm SKU: 66412500](https://maedler.in/product/ball-knob-din-319-pf-version-e-made-from-plastic-with-threaded-bush-of-steel-ball-diameter-25mm-sku-66412500/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version E = With threaded bush of zinc-plated steel.Size 16/M4 threaded bush made from brass.       - [Ball knob DIN 319 PF version E made from plastic with threaded bush of steel ball diameter 20mm SKU: 66412000](https://maedler.in/product/ball-knob-din-319-pf-version-e-made-from-plastic-with-threaded-bush-of-steel-ball-diameter-20mm-sku-66412000/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version E = With threaded bush of zinc-plated steel.Size 16/M4 threaded bush made from brass.       - [Ball knob DIN 319 PF version E made from plastic with threaded bush of brass ball diameter 16mm SKU: 66411600](https://maedler.in/product/ball-knob-din-319-pf-version-e-made-from-plastic-with-threaded-bush-of-brass-ball-diameter-16mm-sku-66411600/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version E = With threaded bush of zinc-plated steel.Size 16/M4 threaded bush made from brass.       - [Ball knob DIN 319 PF version C made from plastic ball diameter 50mm SKU: 66405000](https://maedler.in/product/ball-knob-din-319-pf-version-c-made-from-plastic-ball-diameter-50mm-sku-66405000/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version C = With compression-moulded thread.Size 45/M10 is not part of the DIN 319. - [Ball knob DIN 319 PF version C made from plastic ball diameter 45mm SKU: 66404500](https://maedler.in/product/ball-knob-din-319-pf-version-c-made-from-plastic-ball-diameter-45mm-sku-66404500/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version C = With compression-moulded thread.Size 45/M10 is not part of the DIN 319. - [Ball knob DIN 319 PF version C made from plastic ball diameter 40mm SKU: 66404000](https://maedler.in/product/ball-knob-din-319-pf-version-c-made-from-plastic-ball-diameter-40mm-sku-66404000/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version C = With compression-moulded thread.Size 45/M10 is not part of the DIN 319. - [Ball knob DIN 319 PF version C made from plastic ball diameter 32mm SKU: 66403200](https://maedler.in/product/ball-knob-din-319-pf-version-c-made-from-plastic-ball-diameter-32mm-sku-66403200/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version C = With compression-moulded thread.Size 45/M10 is not part of the DIN 319. - [Ball knob DIN 319 PF version E made from plastic with threaded bush of steel ball diameter 25mm SKU: 66402500](https://maedler.in/product/ball-knob-din-319-pf-version-e-made-from-plastic-with-threaded-bush-of-steel-ball-diameter-25mm-sku-66402500/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version C = With compression-moulded thread.Size 45/M10 is not part of the DIN 319. - [Ball knob DIN 319 PF version C made from plastic ball diameter 20mm SKU: 66402000](https://maedler.in/product/ball-knob-din-319-pf-version-c-made-from-plastic-ball-diameter-20mm-sku-66402000/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version C = With compression-moulded thread.Size 45/M10 is not part of the DIN 319. - [Ball knob DIN 319 PF version C made from plastic ball diameter 16mm SKU: 66401600](https://maedler.in/product/ball-knob-din-319-pf-version-c-made-from-plastic-ball-diameter-16mm-sku-66401600/): Material PF31: Duroplatic PF31 (phenolic resin), impact resistant, black, high-gloss finish.Version C = With compression-moulded thread.Size 45/M10 is not part of the DIN 319. - [Revolving handle DIN 98 Al diameter 36mm type E with thread plug M16 material: aluminium polished SKU: 66333600](https://maedler.in/product/revolving-handle-din-98-al-diameter-36mm-type-e-with-thread-plug-m16-material-aluminium-polished-sku-66333600/): Material: Aluminium polished. Spindle Steel, zinc-plated.Version E = with threaded spindle and Allen screw. - [Revolving handle DIN 98 Al diameter 32mm type E with thread plug M12 material: aluminium polished SKU: 66333200](https://maedler.in/product/revolving-handle-din-98-al-diameter-32mm-type-e-with-thread-plug-m12-material-aluminium-polished-sku-66333200/): Material: Aluminium polished. Spindle Steel, zinc-plated.Version E = with threaded spindle and Allen screw. - [Revolving handle DIN 98 Al diameter 25mm type E with thread plug M10 material: aluminium polished SKU: 66332500](https://maedler.in/product/revolving-handle-din-98-al-diameter-25mm-type-e-with-thread-plug-m10-material-aluminium-polished-sku-66332500/): Material: Aluminium polished. Spindle Steel, zinc-plated.Version E = with threaded spindle and Allen screw. - [Revolving handle DIN 98 Al diameter 20mm type E with thread plug M8 material: aluminium polished SKU: 66332000](https://maedler.in/product/revolving-handle-din-98-al-diameter-20mm-type-e-with-thread-plug-m8-material-aluminium-polished-sku-66332000/): Material: Aluminium polished. Spindle Steel, zinc-plated.Version E = with threaded spindle and Allen screw. - [Revolving handle DIN 98 Al diameter 16mm type E with thread plug M6 material: aluminium polished SKU: 66331600](https://maedler.in/product/revolving-handle-din-98-al-diameter-16mm-type-e-with-thread-plug-m6-material-aluminium-polished-sku-66331600/): Material: Aluminium polished. Spindle Steel, zinc-plated.Version E = with threaded spindle and Allen screw. - [Revolving handle made from plastic DIN 98 H diameter 32mm type E with thread plug M12 SKU: 66323200](https://maedler.in/product/revolving-handle-made-from-plastic-din-98-h-diameter-32mm-type-e-with-thread-plug-m12-sku-66323200/): Material: Plastic Thermoplast (Polyamide), black, matt finish. Version E = with threaded spindle and Allen screw. Spindle: Steel, zinc-plated. - [Revolving handle made from plastic DIN 98 TH diameter 25mm type E with thread plug M10 SKU: 66322500](https://maedler.in/product/revolving-handle-made-from-plastic-din-98-th-diameter-25mm-type-e-with-thread-plug-m10-sku-66322500/): Material: Plastic Thermoplast (Polyamide), black, matt finish. Version E = with threaded spindle and Allen screw. Spindle: Steel, zinc-plated. - [Revolving handle made from plastic DIN 98 TH diameter 20mm type E with thread plug M8 SKU: 66322000](https://maedler.in/product/revolving-handle-made-from-plastic-din-98-th-diameter-20mm-type-e-with-thread-plug-m8-sku-66322000/): Material: Plastic Thermoplast (Polyamide), black, matt finish. Version E = with threaded spindle and Allen screw. Spindle: Steel, zinc-plated. - [Revolving handle made from plastic DIN 98 TH diameter 16mm type E with thread plug M6 SKU: 66321600](https://maedler.in/product/revolving-handle-made-from-plastic-din-98-th-diameter-16mm-type-e-with-thread-plug-m6-sku-66321600/): Material: Plastic Thermoplast (Polyamide), black, matt finish. Version E = with threaded spindle and Allen screw. Spindle: Steel, zinc-plated. - [Revolving handle made from steel DIN 98 St diameter 36mm type E with thread plug M16 SKU: 66313600](https://maedler.in/product/revolving-handle-made-from-steel-din-98-st-diameter-36mm-type-e-with-thread-plug-m16-sku-66313600/): Material: Steel zinc-plated. Version E = with threaded spindle and Allen screw. - [Revolving handle made from steel DIN 98 St diameter 32mm type E with thread plug M12 SKU: 66313200](https://maedler.in/product/revolving-handle-made-from-steel-din-98-st-diameter-32mm-type-e-with-thread-plug-m12-sku-66313200/): Material: Steel zinc-plated. Version E = with threaded spindle and Allen screw. - [Revolving handle made from steel DIN 98 St diameter 25mm type E with thread plug M10 SKU: 66312500](https://maedler.in/product/revolving-handle-made-from-steel-din-98-st-diameter-25mm-type-e-with-thread-plug-m10-sku-66312500/): Material: Steel zinc-plated. Version E = with threaded spindle and Allen screw. - [Revolving handle made from steel DIN 98 St diameter 20mm type E with thread plug M8 SKU: 66312000](https://maedler.in/product/revolving-handle-made-from-steel-din-98-st-diameter-20mm-type-e-with-thread-plug-m8-sku-66312000/): Material: Steel zinc-plated. Version E = with threaded spindle and Allen screw. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 315mm SKU: 15033100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-315mm-sku-15033100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 280mm SKU: 15032800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-280mm-sku-15032800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 250mm SKU: 15032500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-250mm-sku-15032500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 224mm SKU: 15032200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-224mm-sku-15032200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 200mm SKU: 15032000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-200mm-sku-15032000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 180mm SKU: 15031800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-180mm-sku-15031800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 160mm SKU: 15031600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-160mm-sku-15031600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 140mm SKU: 15031400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-140mm-sku-15031400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 125mm SKU: 15031200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-125mm-sku-15031200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 112mm SKU: 15031100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-112mm-sku-15031100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 100mm SKU: 15031000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-100mm-sku-15031000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 90mm SKU: 15030900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-90mm-sku-15030900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 80mm SKU: 15030800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-80mm-sku-15030800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 71mm SKU: 15030700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-71mm-sku-15030700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 63mm SKU: 15030600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-63mm-sku-15030600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 315mm SKU: 15023100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-315mm-sku-15023100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 280mm SKU: 15022800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-280mm-sku-15022800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 250mm SKU: 15022500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-250mm-sku-15022500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 224mm SKU: 15022200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-224mm-sku-15022200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 200mm SKU: 15022000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-200mm-sku-15022000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 180mm SKU: 15021800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-180mm-sku-15021800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 160mm SKU: 15021600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-160mm-sku-15021600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 140mm SKU: 15021400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-140mm-sku-15021400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 125mm SKU: 15021200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-125mm-sku-15021200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 112mm SKU: 15021100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-112mm-sku-15021100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 100mm SKU: 15021000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-100mm-sku-15021000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 90mm SKU: 15020900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-90mm-sku-15020900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 80mm SKU: 15020800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-80mm-sku-15020800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 71mm SKU: 15020700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-71mm-sku-15020700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 63mm SKU: 15020600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-63mm-sku-15020600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 56mm SKU: 15020300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-56mm-sku-15020300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 50mm SKU: 15020200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-50mm-sku-15020200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 315mm SKU: 15013100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-315mm-sku-15013100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 280mm SKU: 15012800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-280mm-sku-15012800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 250mm SKU: 15012500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-250mm-sku-15012500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 224mm SKU: 15012200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-224mm-sku-15012200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 200mm SKU: 15012000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-200mm-sku-15012000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 180mm SKU: 15011800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-180mm-sku-15011800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 160mm SKU: 15011600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-160mm-sku-15011600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 140mm SKU: 15011400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-140mm-sku-15011400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 125mm SKU: 15011200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-125mm-sku-15011200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 112mm SKU: 15011100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-112mm-sku-15011100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 100mm SKU: 15011000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-100mm-sku-15011000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 90mm SKU: 15010900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-90mm-sku-15010900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 80mm SKU: 15010800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-80mm-sku-15010800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 71mm SKU: 15010700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-71mm-sku-15010700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 63mm SKU: 15010600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-63mm-sku-15010600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 56mm SKU: 15010300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-56mm-sku-15010300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPZ, SPZ and Z (10) 1 groove nominal diameter 50mm SKU: 15010200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-50mm-sku-15010200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [Plastic guide rail 60 x 20 x 2000mm for roller chain 12 B-3 SKU: 14113701](https://maedler.in/product/plastic-guide-rail-60-x-20-x-2000mm-for-roller-chain-12-b-3-sku-14113701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 60 x 15 x 2000mm for roller chain 12 B-3 SKU: 14113700](https://maedler.in/product/plastic-guide-rail-60-x-15-x-2000mm-for-roller-chain-12-b-3-sku-14113700/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 20 x 2000mm for roller chain 10 B-3 SKU: 14113602](https://maedler.in/product/plastic-guide-rail-55-x-20-x-2000mm-for-roller-chain-10-b-3-sku-14113602/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 15 x 2000mm for roller chain 10 B-3 SKU: 14113601](https://maedler.in/product/plastic-guide-rail-55-x-15-x-2000mm-for-roller-chain-10-b-3-sku-14113601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 10 x 2000mm for roller chain 10 B-3 SKU: 14113600](https://maedler.in/product/plastic-guide-rail-55-x-10-x-2000mm-for-roller-chain-10-b-3-sku-14113600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 20 x 2000mm for roller chain 08 B-3 SKU: 14113502](https://maedler.in/product/plastic-guide-rail-45-x-20-x-2000mm-for-roller-chain-08-b-3-sku-14113502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 15 x 2000mm for roller chain 08 B-3 SKU: 14113501](https://maedler.in/product/plastic-guide-rail-45-x-15-x-2000mm-for-roller-chain-08-b-3-sku-14113501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 10 x 2000mm for roller chain 08 B-3 SKU: 14113500](https://maedler.in/product/plastic-guide-rail-45-x-10-x-2000mm-for-roller-chain-08-b-3-sku-14113500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 10 x 2000mm for roller chain 06 B-3 SKU: 14113100](https://maedler.in/product/plastic-guide-rail-35-x-10-x-2000mm-for-roller-chain-06-b-3-sku-14113100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 65 x 20 x 2000mm for double-strand roller chain 16B-2 SKU: 14112802](https://maedler.in/product/plastic-guide-rail-65-x-20-x-2000mm-for-double-strand-roller-chain-16b-2-sku-14112802/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 65 x 15 x 2000mm for double-strand roller chain 16B-2 SKU: 14112801](https://maedler.in/product/plastic-guide-rail-65-x-15-x-2000mm-for-double-strand-roller-chain-16b-2-sku-14112801/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 20 x 2000mm for double-strand roller chain 12B-2 SKU: 14112702](https://maedler.in/product/plastic-guide-rail-45-x-20-x-2000mm-for-double-strand-roller-chain-12b-2-sku-14112702/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 15 x 2000mm for double-strand roller chain 12B-2 SKU: 14112701](https://maedler.in/product/plastic-guide-rail-45-x-15-x-2000mm-for-double-strand-roller-chain-12b-2-sku-14112701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 20 x 2000mm for double-strand roller chain 10B-2 SKU: 14112602](https://maedler.in/product/plastic-guide-rail-40-x-20-x-2000mm-for-double-strand-roller-chain-10b-2-sku-14112602/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 15 x 2000mm for double-strand roller chain 10B-2 SKU: 14112601](https://maedler.in/product/plastic-guide-rail-40-x-15-x-2000mm-for-double-strand-roller-chain-10b-2-sku-14112601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 10 x 2000mm for double-strand roller chain 10B-2 SKU: 14112600](https://maedler.in/product/plastic-guide-rail-40-x-10-x-2000mm-for-double-strand-roller-chain-10b-2-sku-14112600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 20 x 2000mm for double-strand roller chain 08B-2 SKU: 14112502](https://maedler.in/product/plastic-guide-rail-35-x-20-x-2000mm-for-double-strand-roller-chain-08b-2-sku-14112502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 15 x 2000mm for double-strand roller chain 08B-2 SKU: 14112501](https://maedler.in/product/plastic-guide-rail-35-x-15-x-2000mm-for-double-strand-roller-chain-08b-2-sku-14112501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 10 x 2000mm for double-strand roller chain 08B-2 SKU: 14112500](https://maedler.in/product/plastic-guide-rail-35-x-10-x-2000mm-for-double-strand-roller-chain-08b-2-sku-14112500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 10 x 2000mm for double-strand roller chain 06B-2 SKU: 14112100](https://maedler.in/product/plastic-guide-rail-25-x-10-x-2000mm-for-double-strand-roller-chain-06b-2-sku-14112100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 20 x 2000mm for roller chain 16B-1 SKU: 14110801](https://maedler.in/product/plastic-guide-rail-40-x-20-x-2000mm-for-roller-chain-16b-1-sku-14110801/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 15 x 2000mm for roller chain 16B-1 SKU: 14110800](https://maedler.in/product/plastic-guide-rail-40-x-15-x-2000mm-for-roller-chain-16b-1-sku-14110800/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 20 x 2000mm for roller chain 12B-1 SKU: 14110701](https://maedler.in/product/plastic-guide-rail-25-x-20-x-2000mm-for-roller-chain-12b-1-sku-14110701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 15 x 2000mm for roller chain 12B-1 SKU: 14110700](https://maedler.in/product/plastic-guide-rail-25-x-15-x-2000mm-for-roller-chain-12b-1-sku-14110700/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 20 x 2000mm for roller chain 10B-1 SKU: 14110601](https://maedler.in/product/plastic-guide-rail-20-x-20-x-2000mm-for-roller-chain-10b-1-sku-14110601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 15 x 2000mm for roller chain 10B-1 SKU: 14110600](https://maedler.in/product/plastic-guide-rail-20-x-15-x-2000mm-for-roller-chain-10b-1-sku-14110600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 20 x 2000mm for roller chain 08B-1 SKU: 14110502](https://maedler.in/product/plastic-guide-rail-20-x-20-x-2000mm-for-roller-chain-08b-1-sku-14110502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 15 x 2000mm for roller chain 08B-1 SKU: 14110501](https://maedler.in/product/plastic-guide-rail-20-x-15-x-2000mm-for-roller-chain-08b-1-sku-14110501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 20 x 10 x 2000mm for roller chain 08B-1 SKU: 14110500](https://maedler.in/product/plastic-guide-rail-20-x-10-x-2000mm-for-roller-chain-08b-1-sku-14110500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 15 x 10 x 2000mm for roller chain 083-1 SKU: 14110300](https://maedler.in/product/plastic-guide-rail-15-x-10-x-2000mm-for-roller-chain-083-1-sku-14110300/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 15 x 10 x 2000mm for roller chain 06B-1 SKU: 14110100](https://maedler.in/product/plastic-guide-rail-15-x-10-x-2000mm-for-roller-chain-06b-1-sku-14110100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 60 x 20 x 1000mm for roller chain 12 B-3 SKU: 14103701](https://maedler.in/product/plastic-guide-rail-60-x-20-x-1000mm-for-roller-chain-12-b-3-sku-14103701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 60 x 15 x 1000mm for roller chain 12 B-3 SKU: 14103700](https://maedler.in/product/plastic-guide-rail-60-x-15-x-1000mm-for-roller-chain-12-b-3-sku-14103700/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 20 x 1000mm for roller chain 10 B-3 SKU: 14103602](https://maedler.in/product/plastic-guide-rail-55-x-20-x-1000mm-for-roller-chain-10-b-3-sku-14103602/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 15 x 1000mm for roller chain 10 B-3 SKU: 14103601](https://maedler.in/product/plastic-guide-rail-55-x-15-x-1000mm-for-roller-chain-10-b-3-sku-14103601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 55 x 10 x 1000mm for roller chain 10 B-3 SKU: 14103600](https://maedler.in/product/plastic-guide-rail-55-x-10-x-1000mm-for-roller-chain-10-b-3-sku-14103600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 20 x 1000mm for roller chain 08 B-3 SKU: 14103502](https://maedler.in/product/plastic-guide-rail-45-x-20-x-1000mm-for-roller-chain-08-b-3-sku-14103502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 15 x 1000mm for roller chain 08 B-3 SKU: 14103501](https://maedler.in/product/plastic-guide-rail-45-x-15-x-1000mm-for-roller-chain-08-b-3-sku-14103501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 10 x 1000mm for roller chain 08 B-3 SKU: 14103500](https://maedler.in/product/plastic-guide-rail-45-x-10-x-1000mm-for-roller-chain-08-b-3-sku-14103500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 10 x 1000mm for roller chain 06 B-3 SKU: 14103100](https://maedler.in/product/plastic-guide-rail-35-x-10-x-1000mm-for-roller-chain-06-b-3-sku-14103100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 65 x 20 x 1000mm for double-strand roller chain 16B-2 SKU: 14102802](https://maedler.in/product/plastic-guide-rail-65-x-20-x-1000mm-for-double-strand-roller-chain-16b-2-sku-14102802/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 65 x 15 x 1000mm for double-strand roller chain 16B-2 SKU: 14102801](https://maedler.in/product/plastic-guide-rail-65-x-15-x-1000mm-for-double-strand-roller-chain-16b-2-sku-14102801/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 20 x 1000mm for double-strand roller chain 12B-2 SKU: 14102702](https://maedler.in/product/plastic-guide-rail-45-x-20-x-1000mm-for-double-strand-roller-chain-12b-2-sku-14102702/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 45 x 15 x 1000mm for double-strand roller chain 12B-2 SKU: 14102701](https://maedler.in/product/plastic-guide-rail-45-x-15-x-1000mm-for-double-strand-roller-chain-12b-2-sku-14102701/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 20 x 1000mm for double-strand roller chain 10B-2 SKU: 14102602](https://maedler.in/product/plastic-guide-rail-40-x-20-x-1000mm-for-double-strand-roller-chain-10b-2-sku-14102602/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 15 x 1000mm for double-strand roller chain 10B-2 SKU: 14102601](https://maedler.in/product/plastic-guide-rail-40-x-15-x-1000mm-for-double-strand-roller-chain-10b-2-sku-14102601/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 40 x 10 x 1000mm for double-strand roller chain 10B-2 SKU: 14102600](https://maedler.in/product/plastic-guide-rail-40-x-10-x-1000mm-for-double-strand-roller-chain-10b-2-sku-14102600/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 20 x 1000mm for double-strand roller chain 08B-2 SKU: 14102502](https://maedler.in/product/plastic-guide-rail-35-x-20-x-1000mm-for-double-strand-roller-chain-08b-2-sku-14102502/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 15 x 1000mm for double-strand roller chain 08B-2 SKU: 14102501](https://maedler.in/product/plastic-guide-rail-35-x-15-x-1000mm-for-double-strand-roller-chain-08b-2-sku-14102501/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 35 x 10 x 1000mm for double-strand roller chain 08B-2 SKU: 14102500](https://maedler.in/product/plastic-guide-rail-35-x-10-x-1000mm-for-double-strand-roller-chain-08b-2-sku-14102500/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Plastic guide rail 25 x 10 x 1000mm for double-strand roller chain 06B-2 SKU: 14102100](https://maedler.in/product/plastic-guide-rail-25-x-10-x-1000mm-for-double-strand-roller-chain-06b-2-sku-14102100/): Material: Ultra-high-molecular polyethylene PE-UHMW. These side-rails serve to support fast-running roller chains which are ligned up exactly; other than steel or metal side-rails they dampen the noise and reduce strong wear. Special features to be highlighted: wear-resistant, self-lubricating, acid and impact resistant, temperature range -200°C to +60°C (for short time up to +80°C), corrosion resistant, soil resistant and cost efficient. Stock lengths 1 meter and 2 meter. Fixed length and other types on request. - [Eccentric clamp 927 Version B external thread M6 x 20 SKU: 66576321](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m6-x-20-sku-66576321/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Excentric clamp 927 Version B internal thread M6 SKU: 66576320](https://maedler.in/product/excentric-clamp-927-version-b-internal-thread-m6-sku-66576320/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M6 x 50 SKU: 66576316](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m6-x-50-sku-66576316/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M6 x 40 SKU: 66576315](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m6-x-40-sku-66576315/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M6 x 35 SKU: 66576314](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m6-x-35-sku-66576314/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M6 x 30 SKU: 66576313](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m6-x-30-sku-66576313/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M6 x 25 SKU: 66576312](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m6-x-25-sku-66576312/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M6 x 20 SKU: 66576311](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m6-x-20-sku-66576311/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Excentric clamp 927 Version A internal thread M6 SKU: 66576310](https://maedler.in/product/excentric-clamp-927-version-a-internal-thread-m6-sku-66576310/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Support washer: Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Adjustable clamping lever 120 version G with external thread M12 x 50mm long lever length L2 = 89mm SKU: 66576250](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m12-x-50mm-long-lever-length-l2-89mm-sku-66576250/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M12 x 40mm long lever length L2 = 89mm SKU: 66576240](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m12-x-40mm-long-lever-length-l2-89mm-sku-66576240/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M12 x 32mm lever length L2 = 89mm SKU: 66576232](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m12-x-32mm-lever-length-l2-89mm-sku-66576232/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M12 x 25mm lever length L2 = 89mm SKU: 66576225](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m12-x-25mm-lever-length-l2-89mm-sku-66576225/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M10 x 50mm long lever length L2 = 74mm SKU: 66576050](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m10-x-50mm-long-lever-length-l2-74mm-sku-66576050/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M10 x 40mm long lever length L2 = 74mm SKU: 66576040](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m10-x-40mm-long-lever-length-l2-74mm-sku-66576040/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M10 x 32mm long lever length L2 = 74mm SKU: 66576032](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m10-x-32mm-long-lever-length-l2-74mm-sku-66576032/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M10 x 25mm long lever length L2 = 74mm SKU: 66576025](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m10-x-25mm-long-lever-length-l2-74mm-sku-66576025/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M10 x 20mm long lever length L2 = 74mm SKU: 66576020](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m10-x-20mm-long-lever-length-l2-74mm-sku-66576020/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M8 x 40mm long lever length L2 = 62mm SKU: 66575840](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m8-x-40mm-long-lever-length-l2-62mm-sku-66575840/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M8 x 32mm long lever length L2 = 62 SKU: 66575832](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m8-x-32mm-long-lever-length-l2-62-sku-66575832/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M8 x 25mm long lever length L2 = 62mm SKU: 66575825](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m8-x-25mm-long-lever-length-l2-62mm-sku-66575825/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M8 x 20mm long lever length L2 = 62mm SKU: 66575820](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m8-x-20mm-long-lever-length-l2-62mm-sku-66575820/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M8 x 16mm long lever length L2 = 62mm SKU: 66575816](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m8-x-16mm-long-lever-length-l2-62mm-sku-66575816/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M6 x 40mm long lever length L2 = 62mm SKU: 66575640](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m6-x-40mm-long-lever-length-l2-62mm-sku-66575640/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M6 x 32mm long lever length L2 = 62mm SKU: 66575632](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m6-x-32mm-long-lever-length-l2-62mm-sku-66575632/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M6 x 25mm long lever length L2 = 62mm SKU: 66575625](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m6-x-25mm-long-lever-length-l2-62mm-sku-66575625/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M6 x 20mm long lever length L2 = 62mm SKU: 66575620](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m6-x-20mm-long-lever-length-l2-62mm-sku-66575620/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M6 x 16mm long lever length L2 = 62mm SKU: 66575616](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m6-x-16mm-long-lever-length-l2-62mm-sku-66575616/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M5 x 32mm long lever length L2 = 45mm SKU: 66575532](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m5-x-32mm-long-lever-length-l2-45mm-sku-66575532/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M5 x 25mm long lever length L2 = 45mm SKU: 66575525](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m5-x-25mm-long-lever-length-l2-45mm-sku-66575525/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M5 x 20mm long lever length L2 = 45mm SKU: 66575520](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m5-x-20mm-long-lever-length-l2-45mm-sku-66575520/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M5 x 16mm long lever length L2 = 45mm SKU: 66575516](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m5-x-16mm-long-lever-length-l2-45mm-sku-66575516/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M5 x 12mm long lever length L2 = 45mm SKU: 66575512](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m5-x-12mm-long-lever-length-l2-45mm-sku-66575512/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 300 version N with internal thread M16 lever length L1 = 108mm SKU: 66573800](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m16-lever-length-l1-108mm-sku-66573800/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M12 lever length L1 = 92mm SKU: 66573600](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m12-lever-length-l1-92mm-sku-66573600/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M10 lever length L1 = 92mm SKU: 66573400](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m10-lever-length-l1-92mm-sku-66573400/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M10 lever length L1 = 78mm SKU: 66573300](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m10-lever-length-l1-78mm-sku-66573300/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M8 lever length L1 = 78mm SKU: 66573100](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m8-lever-length-l1-78mm-sku-66573100/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M8 lever length L1 = 63mm SKU: 66573000](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m8-lever-length-l1-63mm-sku-66573000/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M6 lever length L1 = 63mm SKU: 66572800](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m6-lever-length-l1-63mm-sku-66572800/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M5 lever length L1 = 45mm SKU: 66572600](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m5-lever-length-l1-45mm-sku-66572600/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M4 lever length L1 = 45mm SKU: 66572400](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m4-lever-length-l1-45mm-sku-66572400/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M5 lever length L1 = 30mm SKU: 66572200](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m5-lever-length-l1-30mm-sku-66572200/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version N with internal thread M4 lever length L1 = 30mm SKU: 66572000](https://maedler.in/product/adjustable-clamping-lever-300-version-n-with-internal-thread-m4-lever-length-l1-30mm-sku-66572000/): Material: Threaded bush and locking screw: steel 5.8, black oxide finish. Handle: zinc die-cast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, they are easy to operate and they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 120 version N internal thread M16 length l2=108mm SKU: 66571600](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m16-length-l2108mm-sku-66571600/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version N internal thread M12 length l2=108mm SKU: 66571300](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m12-length-l2108mm-sku-66571300/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version N internal thread M12 length l2=89mm SKU: 66571200](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m12-length-l289mm-sku-66571200/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version N internal thread M10 length l2=89mm SKU: 66571100](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m10-length-l289mm-sku-66571100/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version N internal thread M10 length l2=74mm SKU: 66571000](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m10-length-l274mm-sku-66571000/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version N internal thread M8 length l2=74mm SKU: 66570900](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m8-length-l274mm-sku-66570900/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version N internal thread M8 length l2=62mm SKU: 66570800](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m8-length-l262mm-sku-66570800/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version N internal thread M6 length l2=62mm SKU: 66570700](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m6-length-l262mm-sku-66570700/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version N internal thread M6 SKU: 66570600](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m6-sku-66570600/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version N internal thread M5 length l2=45mm SKU: 66570500](https://maedler.in/product/adjustable-clamping-lever-120-version-n-internal-thread-m5-length-l245mm-sku-66570500/): Material: Handle: Zinc die-cast. Threaded bush and locking screw: Steel, black oxide finish. Handle: plastic coated, colour black RAL 9005. Disengaged by pulling. Version N = Handle slanted, with metric-threaded bush. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 355 version G with external thread M12 x 63mm lever length L1 = 95mm polyamide black-grey SKU: 66555789](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m12-x-63mm-lever-length-l1-95mm-polyamide-black-grey-sku-66555789/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M12 x 50mm lever length L1 = 95mm polyamide black-grey SKU: 66555788](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m12-x-50mm-lever-length-l1-95mm-polyamide-black-grey-sku-66555788/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M12 x 40mm lever length L1 = 95mm polyamide black-grey SKU: 66555787](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m12-x-40mm-lever-length-l1-95mm-polyamide-black-grey-sku-66555787/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M12 x 32mm lever length L1 = 95mm polyamide black-grey SKU: 66555786](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m12-x-32mm-lever-length-l1-95mm-polyamide-black-grey-sku-66555786/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 63mm lever length L1 = 95mm polyamide black-grey SKU: 66555781](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-63mm-lever-length-l1-95mm-polyamide-black-grey-sku-66555781/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 50mm lever length L1 = 95mm polyamide black-grey SKU: 66555780](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-50mm-lever-length-l1-95mm-polyamide-black-grey-sku-66555780/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 40mm lever length L1 = 95mm polyamide black-grey SKU: 66555779](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-40mm-lever-length-l1-95mm-polyamide-black-grey-sku-66555779/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 32mm lever length L1 = 95mm polyamide black-grey SKU: 66555778](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-32mm-lever-length-l1-95mm-polyamide-black-grey-sku-66555778/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 63mm lever length L1 = 78mm polyamide black-grey SKU: 66555767](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-63mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555767/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 50mm lever length L1 = 78mm polyamide black-grey SKU: 66555766](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-50mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555766/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 40mm lever length L1 = 78mm polyamide black-grey SKU: 66555765](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-40mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555765/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 32mm lever length L1 = 78mm polyamide black-grey SKU: 66555764](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-32mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555764/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 25mm lever length L1 = 78mm polyamide black-grey SKU: 66555763](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-25mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555763/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M10 x 20mm lever length L1 = 78mm polyamide black-grey SKU: 66555762](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m10-x-20mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555762/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M8 x 40mm lever length L1 = 78mm polyamide black-grey SKU: 66555757](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m8-x-40mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555757/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M8 x 32mm lever length L1 = 78mm polyamide black-grey SKU: 66555756](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m8-x-32mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555756/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M8 x 25mm lever length L1 = 78mm polyamide black-grey SKU: 66555755](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m8-x-25mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555755/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M8 x 20mm lever length L1 = 78mm polyamide black-grey SKU: 66555754](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m8-x-20mm-lever-length-l1-78mm-polyamide-black-grey-sku-66555754/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M8 x 40mm lever length L1 = 63mm polyamide black-grey SKU: 66555743](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m8-x-40mm-lever-length-l1-63mm-polyamide-black-grey-sku-66555743/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M8 x 32mm lever length L1 = 63mm polyamide black-grey SKU: 66555742](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m8-x-32mm-lever-length-l1-63mm-polyamide-black-grey-sku-66555742/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M8 x 25mm lever length L1 = 63mm polyamide black-grey SKU: 66555741](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m8-x-25mm-lever-length-l1-63mm-polyamide-black-grey-sku-66555741/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M8 x 20mm lever length L1 = 63mm polyamide black-grey SKU: 66555740](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m8-x-20mm-lever-length-l1-63mm-polyamide-black-grey-sku-66555740/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M6 x 32mm lever length L1 = 63mm polyamide black-grey SKU: 66555734](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m6-x-32mm-lever-length-l1-63mm-polyamide-black-grey-sku-66555734/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M6 x 20mm lever length L1 = 63mm polyamide black-grey SKU: 66555732](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m6-x-20mm-lever-length-l1-63mm-polyamide-black-grey-sku-66555732/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M5 x 25mm lever length L1 = 44mm polyamide black-grey SKU: 66555719](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m5-x-25mm-lever-length-l1-44mm-polyamide-black-grey-sku-66555719/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M5 x 20mm lever length L1 = 44mm polyamide black-grey SKU: 66555718](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m5-x-20mm-lever-length-l1-44mm-polyamide-black-grey-sku-66555718/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M5 x 12mm lever length L1 = 44mm polyamide black-grey SKU: 66555716](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m5-x-12mm-lever-length-l1-44mm-polyamide-black-grey-sku-66555716/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M4 x 16mm lever length L1 = 44mm polyamide black-grey SKU: 66555712](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m4-x-16mm-lever-length-l1-44mm-polyamide-black-grey-sku-66555712/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version G with external thread M4 x 12mm lever length L1 = 44mm polyamide black-grey SKU: 66555711](https://maedler.in/product/adjustable-clamping-lever-355-version-g-with-external-thread-m4-x-12mm-lever-length-l1-44mm-polyamide-black-grey-sku-66555711/): Material: Threaded stud and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version N with internal thread M12 lever length L1 = 95mm ployamide black-grey SKU: 66555709](https://maedler.in/product/adjustable-clamping-lever-355-version-n-with-internal-thread-m12-lever-length-l1-95mm-ployamide-black-grey-sku-66555709/): Material: Threaded bush and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version N with internal thread M10 lever length L1 = 95mm ployamide black-grey SKU: 66555708](https://maedler.in/product/adjustable-clamping-lever-355-version-n-with-internal-thread-m10-lever-length-l1-95mm-ployamide-black-grey-sku-66555708/): Material: Threaded bush and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version N with internal thread M10 lever length L1 = 78mm ployamide black-grey SKU: 66555707](https://maedler.in/product/adjustable-clamping-lever-355-version-n-with-internal-thread-m10-lever-length-l1-78mm-ployamide-black-grey-sku-66555707/): Material: Threaded bush and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version N with internal thread M8 lever length L1 = 78mm ployamide black-grey SKU: 66555706](https://maedler.in/product/adjustable-clamping-lever-355-version-n-with-internal-thread-m8-lever-length-l1-78mm-ployamide-black-grey-sku-66555706/): Material: Threaded bush and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version N with internal thread M8 lever length L1 = 63mm ployamide black-grey SKU: 66555705](https://maedler.in/product/adjustable-clamping-lever-355-version-n-with-internal-thread-m8-lever-length-l1-63mm-ployamide-black-grey-sku-66555705/): Material: Threaded bush and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version N with internal thread M6 lever length L1 = 63mm ployamide black-grey SKU: 66555704](https://maedler.in/product/adjustable-clamping-lever-355-version-n-with-internal-thread-m6-lever-length-l1-63mm-ployamide-black-grey-sku-66555704/): Material: Threaded bush and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version N with internal thread M6 lever length L1 = 44mm ployamide black-grey SKU: 66555703](https://maedler.in/product/adjustable-clamping-lever-355-version-n-with-internal-thread-m6-lever-length-l1-44mm-ployamide-black-grey-sku-66555703/): Material: Threaded bush and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version N with internal thread M5 lever length L1 = 44mm ployamide black-grey SKU: 66555702](https://maedler.in/product/adjustable-clamping-lever-355-version-n-with-internal-thread-m5-lever-length-l1-44mm-ployamide-black-grey-sku-66555702/): Material: Threaded bush and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 355 version N with internal thread M4 lever length L1 = 44mm ployamide black-grey SKU: 66555701](https://maedler.in/product/adjustable-clamping-lever-355-version-n-with-internal-thread-m4-lever-length-l1-44mm-ployamide-black-grey-sku-66555701/): Material: Threaded bush and retaining screw steel, black oxide finish.Grip body: technopolymer (Polyamide PA), glas fibre reinforced, black-grey RAL 7021.Serrated ring zinc die casting.User-friendly design. To be used preferably when the clamping range is limited or if aspecific clamping position is required. By lifting (pulling) the handle the splines work loose andthe clamping lever canbe turned to the most suitable clamping position.Letting go causes the handle to re-engage automatically.Temperature resistant up to +130°C. - [Adjustable clamping lever 119 steel black oxide finished version N ball diameter 16mm SKU: 66551200](https://maedler.in/product/adjustable-clamping-lever-119-steel-black-oxide-finished-version-n-ball-diameter-16mm-sku-66551200/): Material: Steel, black oxide finish. Version N = handle slanted, with metric thread. Adjustable clamping levers are used in applications where either the clamping range is limited or where a specific lever position is required. The serrated bore in the spherical hub is fitted with a threaded-bolt insert, which engages in the hub with its own serrations. By depressing the clamping lever, the serrations are disengaged, freeing it for re-positioning in the most convenient position. When releasing the lever, the serrations re-engage automatically. Should a rotation of 360º not be possible, the insert can be slightly screwed in (after the lever has been disengaged) by means of the slotted knurled screw. - [Adjustable clamping lever 119 steel black oxide finished version N ball diameter 13mm SKU: 66551000](https://maedler.in/product/adjustable-clamping-lever-119-steel-black-oxide-finished-version-n-ball-diameter-13mm-sku-66551000/): Material: Steel, black oxide finish. Version N = handle slanted, with metric thread. Adjustable clamping levers are used in applications where either the clamping range is limited or where a specific lever position is required. The serrated bore in the spherical hub is fitted with a threaded-bolt insert, which engages in the hub with its own serrations. By depressing the clamping lever, the serrations are disengaged, freeing it for re-positioning in the most convenient position. When releasing the lever, the serrations re-engage automatically. Should a rotation of 360º not be possible, the insert can be slightly screwed in (after the lever has been disengaged) by means of the slotted knurled screw. - [Adjustable clamping lever 119 steel black oxide finished version N ball diameter 10mm SKU: 66550800](https://maedler.in/product/adjustable-clamping-lever-119-steel-black-oxide-finished-version-n-ball-diameter-10mm-sku-66550800/): Material: Steel, black oxide finish. Version N = handle slanted, with metric thread. Adjustable clamping levers are used in applications where either the clamping range is limited or where a specific lever position is required. The serrated bore in the spherical hub is fitted with a threaded-bolt insert, which engages in the hub with its own serrations. By depressing the clamping lever, the serrations are disengaged, freeing it for re-positioning in the most convenient position. When releasing the lever, the serrations re-engage automatically. Should a rotation of 360º not be possible, the insert can be slightly screwed in (after the lever has been disengaged) by means of the slotted knurled screw. - [Double sided Clamping lever M20 steel zinc-plated SKU: 66547000](https://maedler.in/product/double-sided-clamping-lever-m20-steel-zinc-plated-sku-66547000/): Material: Steel zinc plated glossy or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [Double sided Clamping lever M16 steel zinc-plated SKU: 66546600](https://maedler.in/product/double-sided-clamping-lever-m16-steel-zinc-plated-sku-66546600/): Material: Steel zinc plated glossy or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [Double sided Clamping lever M12 steel zinc-plated SKU: 66546200](https://maedler.in/product/double-sided-clamping-lever-m12-steel-zinc-plated-sku-66546200/): Material: Steel zinc plated glossy or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [Double sided Clamping lever M10 steel zinc-plated SKU: 66546000](https://maedler.in/product/double-sided-clamping-lever-m10-steel-zinc-plated-sku-66546000/): Material: Steel zinc plated glossy or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [Double sided Clamping lever M8 steel zinc-plated SKU: 66545800](https://maedler.in/product/double-sided-clamping-lever-m8-steel-zinc-plated-sku-66545800/): Material: Steel zinc plated glossy or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 112mm SKU: 15311100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-112mm-sku-15311100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 100mm SKU: 15311000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-100mm-sku-15311000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPA, SPA and A (13) 1 groove nominal diameter 90mm SKU: 15310900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-90mm-sku-15310900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPA, SPA and A (13) 1 groove nominal diameter 80mm SKU: 15310800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-80mm-sku-15310800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPA, SPA and A (13) 1 groove nominal diameter 71mm SKU: 15310700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-71mm-sku-15310700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 315mm SKU: 15233100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-315mm-sku-15233100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 280mm SKU: 15232800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-280mm-sku-15232800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 250mm SKU: 15232500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-250mm-sku-15232500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 224mm SKU: 15232200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-224mm-sku-15232200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 200mm SKU: 15232000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-200mm-sku-15232000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 180mm SKU: 15231800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-180mm-sku-15231800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 160mm SKU: 15231600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-160mm-sku-15231600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 140mm SKU: 15231400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-140mm-sku-15231400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 125mm SKU: 15231200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-125mm-sku-15231200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 112mm SKU: 15231100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-112mm-sku-15231100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 100mm SKU: 15231000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-100mm-sku-15231000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 90mm SKU: 15230900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-90mm-sku-15230900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 80mm SKU: 15230800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-80mm-sku-15230800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 71mm SKU: 15230700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-71mm-sku-15230700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 63mm SKU: 15230600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-63mm-sku-15230600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 56mm SKU: 15230300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-56mm-sku-15230300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 3 grooves nominal diameter 50mm SKU: 15230200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-50mm-sku-15230200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 315mm SKU: 15223100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-315mm-sku-15223100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 280mm SKU: 15222800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-280mm-sku-15222800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 250mm SKU: 15222500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-250mm-sku-15222500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 224mm SKU: 15222200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-224mm-sku-15222200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 200mm SKU: 15222000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-200mm-sku-15222000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 180mm SKU: 15221800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-180mm-sku-15221800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 160mm SKU: 15221600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-160mm-sku-15221600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 140mm SKU: 15221400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-140mm-sku-15221400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 125mm SKU: 15221200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-125mm-sku-15221200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 112mm SKU: 15221100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-112mm-sku-15221100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 100mm SKU: 15221000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-100mm-sku-15221000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 90mm SKU: 15220900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-90mm-sku-15220900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 80mm SKU: 15220800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-80mm-sku-15220800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 71mm SKU: 15220700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-71mm-sku-15220700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 63mm SKU: 15220600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-63mm-sku-15220600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 56mm SKU: 15220300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-56mm-sku-15220300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 2 grooves nominal diameter 50mm SKU: 15220200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-50mm-sku-15220200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 315mm SKU: 15213100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-315mm-sku-15213100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 280mm SKU: 15212800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-280mm-sku-15212800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 250mm SKU: 15212500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-250mm-sku-15212500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 224mm SKU: 15212200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-224mm-sku-15212200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 200mm SKU: 15212000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-200mm-sku-15212000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 180mm SKU: 15211800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-180mm-sku-15211800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 160mm SKU: 15211600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-160mm-sku-15211600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 140mm SKU: 15211400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-140mm-sku-15211400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 125mm SKU: 15211200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-125mm-sku-15211200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 112mm SKU: 15211100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-112mm-sku-15211100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 100mm SKU: 15211000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-100mm-sku-15211000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 90mm SKU: 15210900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-90mm-sku-15210900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 80mm SKU: 15210800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-80mm-sku-15210800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 71mm SKU: 15210700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-71mm-sku-15210700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 63mm SKU: 15210600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-63mm-sku-15210600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 56mm SKU: 15210300](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-56mm-sku-15210300/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPA, SPA and A (13) 1 groove nominal diameter 50mm SKU: 15210200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-50mm-sku-15210200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material cast iron for taper-bush 2517 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 315mm SKU: 15133100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-315mm-sku-15133100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 280mm SKU: 15132800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-280mm-sku-15132800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 250mm SKU: 15132500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-250mm-sku-15132500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 224mm SKU: 15132200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-224mm-sku-15132200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 200mm SKU: 15132000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-200mm-sku-15132000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 180mm SKU: 15131800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-180mm-sku-15131800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 160mm SKU: 15131600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-160mm-sku-15131600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 140mm SKU: 15131400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-140mm-sku-15131400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 125mm SKU: 15131200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-125mm-sku-15131200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 112mm SKU: 15131100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-112mm-sku-15131100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 100mm SKU: 15131000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-100mm-sku-15131000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 90mm SKU: 15130900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-90mm-sku-15130900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 80mm SKU: 15130800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-80mm-sku-15130800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 71mm SKU: 15130700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-71mm-sku-15130700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 63mm SKU: 15130600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-3-grooves-nominal-diameter-63mm-sku-15130600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 280mm SKU: 15122800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-280mm-sku-15122800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 250mm SKU: 15122500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-250mm-sku-15122500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 224mm SKU: 15122200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-224mm-sku-15122200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 200mm SKU: 15122000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-200mm-sku-15122000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 180mm SKU: 15121800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-180mm-sku-15121800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 160mm SKU: 15121600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-160mm-sku-15121600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 140mm SKU: 15121400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-140mm-sku-15121400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 125mm SKU: 15121200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-125mm-sku-15121200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 112mm SKU: 15121100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-112mm-sku-15121100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 100mm SKU: 15121000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-100mm-sku-15121000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 90mm SKU: 15120900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-90mm-sku-15120900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 80mm SKU: 15120800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-80mm-sku-15120800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 71mm SKU: 15120700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-71mm-sku-15120700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 2 grooves nominal diameter 63mm SKU: 15120600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-2-grooves-nominal-diameter-63mm-sku-15120600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 315mm SKU: 15113100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-315mm-sku-15113100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 280mm SKU: 15112800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-280mm-sku-15112800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 250mm SKU: 15112500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-250mm-sku-15112500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 224mm SKU: 15112200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-224mm-sku-15112200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 200mm SKU: 15112000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-200mm-sku-15112000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 180mm SKU: 15111800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-180mm-sku-15111800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 160mm SKU: 15111600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-160mm-sku-15111600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 140mm SKU: 15111400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-140mm-sku-15111400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 125mm SKU: 15111200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-125mm-sku-15111200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 112mm SKU: 15111100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-112mm-sku-15111100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 100mm SKU: 15111000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-100mm-sku-15111000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 90mm SKU: 15110900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-90mm-sku-15110900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 80mm SKU: 15110800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-80mm-sku-15110800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 71mm SKU: 15110700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-71mm-sku-15110700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 1 groove nominal diameter 63mm SKU: 15110600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpz-spz-and-z-10-1-groove-nominal-diameter-63mm-sku-15110600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Adjustable clamping lever 300.5 version IS-G with external thread M8x32mm lever length L1 = 63mm stainless steel SKU: 66599735](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m8x32mm-lever-length-l1-63mm-stainless-steel-sku-66599735/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M8x25mm lever length L1 = 63mm stainless steel SKU: 66599734](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m8x25mm-lever-length-l1-63mm-stainless-steel-sku-66599734/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M8x20mm lever length L1 = 63mm stainless steel SKU: 66599733](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m8x20mm-lever-length-l1-63mm-stainless-steel-sku-66599733/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x50mm lever length L1 = 63mm stainless steel SKU: 66599730](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x50mm-lever-length-l1-63mm-stainless-steel-sku-66599730/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x40mm lever length L1 = 63mm stainless steel SKU: 66599729](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x40mm-lever-length-l1-63mm-stainless-steel-sku-66599729/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x32mm lever length L1 = 63mm stainless steel SKU: 66599728](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x32mm-lever-length-l1-63mm-stainless-steel-sku-66599728/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x25mm lever length L1 = 63mm stainless steel SKU: 66599727](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x25mm-lever-length-l1-63mm-stainless-steel-sku-66599727/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x20mm lever length L1 = 63mm stainless steel SKU: 66599726](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x20mm-lever-length-l1-63mm-stainless-steel-sku-66599726/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x40mm lever length L1 = 45mm stainless steel SKU: 66599723](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x40mm-lever-length-l1-45mm-stainless-steel-sku-66599723/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x32mm lever length L1 = 45mm stainless steel SKU: 66599722](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x32mm-lever-length-l1-45mm-stainless-steel-sku-66599722/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x25mm lever length L1 = 45mm stainless steel SKU: 66599721](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x25mm-lever-length-l1-45mm-stainless-steel-sku-66599721/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x20mm lever length L1 = 45mm stainless steel SKU: 66599720](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x20mm-lever-length-l1-45mm-stainless-steel-sku-66599720/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M6x16mm lever length L1 = 45mm stainless steel SKU: 66599719](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m6x16mm-lever-length-l1-45mm-stainless-steel-sku-66599719/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M5x32mm lever length L1 = 45mm stainless steel SKU: 66599715](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m5x32mm-lever-length-l1-45mm-stainless-steel-sku-66599715/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M5x25mm lever length L1 = 45mm stainless steel SKU: 66599714](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m5x25mm-lever-length-l1-45mm-stainless-steel-sku-66599714/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M5x20mm lever length L1 = 45mm stainless steel SKU: 66599713](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m5x20mm-lever-length-l1-45mm-stainless-steel-sku-66599713/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M5x16mm lever length L1 = 45mm stainless steel SKU: 66599712](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m5x16mm-lever-length-l1-45mm-stainless-steel-sku-66599712/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M5x12mm lever length L1 = 45mm stainless steel SKU: 66599711](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m5x12mm-lever-length-l1-45mm-stainless-steel-sku-66599711/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-N with internal thread M10 lever length L1 = 78mm stainless steel SKU: 66599706](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-n-with-internal-thread-m10-lever-length-l1-78mm-stainless-steel-sku-66599706/): Material: Threaded bush and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-N with internal thread M8 lever length L1 = 78mm stainless steel SKU: 66599705](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-n-with-internal-thread-m8-lever-length-l1-78mm-stainless-steel-sku-66599705/): Material: Threaded bush and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-N with internal thread M8 lever length L1 = 63mm stainless steel SKU: 66599704](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-n-with-internal-thread-m8-lever-length-l1-63mm-stainless-steel-sku-66599704/): Material: Threaded bush and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-N with internal thread M6 lever length L1 = 63mm stainless steel SKU: 66599703](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-n-with-internal-thread-m6-lever-length-l1-63mm-stainless-steel-sku-66599703/): Material: Threaded bush and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-N with internal thread M6 lever length L1 = 45mm stainless steel SKU: 66599702](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-n-with-internal-thread-m6-lever-length-l1-45mm-stainless-steel-sku-66599702/): Material: Threaded bush and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-N with internal thread M5 lever length L1 = 45mm stainless steel SKU: 66599701](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-n-with-internal-thread-m5-lever-length-l1-45mm-stainless-steel-sku-66599701/): Material: Threaded bush and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Double sided clamping nut M12 stainless steel 1.4305 SKU: 66599462](https://maedler.in/product/double-sided-clamping-nut-m12-stainless-steel-1-4305-sku-66599462/): Material: Steel zinc plated glossy or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [Double sided clamping nut M10 stainless steel 1.4305 SKU: 66599460](https://maedler.in/product/double-sided-clamping-nut-m10-stainless-steel-1-4305-sku-66599460/): Material: Steel zinc plated glossy or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [Double sided clamping nut M8 stainless steel 1.4305 SKU: 66599458](https://maedler.in/product/double-sided-clamping-nut-m8-stainless-steel-1-4305-sku-66599458/): Material: Steel zinc plated glossy or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [Cylindrical clamping nut M16 stainless steel 1.4305 SKU: 66599416](https://maedler.in/product/cylindrical-clamping-nut-m16-stainless-steel-1-4305-sku-66599416/): Material: Steel zinc plated, glossy, or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Cylindrical clamping nut M12 stainless steel 1.4305 SKU: 66599412](https://maedler.in/product/cylindrical-clamping-nut-m12-stainless-steel-1-4305-sku-66599412/): Material: Steel zinc plated, glossy, or stainless steel 1.4305 (AISI 303) blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Clamping lever 202 diameter 40mm material stainless steel SKU: 66599320](https://maedler.in/product/clamping-lever-202-diameter-40mm-material-stainless-steel-sku-66599320/): Material: Stainless steel 1.4308 (CF-8), blasted. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever 202 diameter 32mm material stainless steel SKU: 66599316](https://maedler.in/product/clamping-lever-202-diameter-32mm-material-stainless-steel-sku-66599316/): Material: Stainless steel 1.4308 (CF-8), blasted. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever 202 diameter 25mm material stainless steel SKU: 66599312](https://maedler.in/product/clamping-lever-202-diameter-25mm-material-stainless-steel-sku-66599312/): Material: Stainless steel 1.4308 (CF-8), blasted. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever 202 diameter 20mm material stainless steel SKU: 66599310](https://maedler.in/product/clamping-lever-202-diameter-20mm-material-stainless-steel-sku-66599310/): Material: Stainless steel 1.4308 (CF-8), blasted. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever 202 diameter 16mm material stainless steel SKU: 66599308](https://maedler.in/product/clamping-lever-202-diameter-16mm-material-stainless-steel-sku-66599308/): Material: Stainless steel 1.4308 (CF-8), blasted. Clamp nuts are simple and cost efficient clamping elements. Contact surface machined. - [Clamping lever DIN 99 stainless diameter 20mm ball diameter 32mm SKU: 66599116](https://maedler.in/product/clamping-lever-din-99-stainless-diameter-20mm-ball-diameter-32mm-sku-66599116/): Material: Stainless steel 1.4305 (AISI 303), matt finish blasted. Handle slanted, with metric thread. - [Clamping lever DIN 99 stainless diameter 16mm ball diameter 25mm SKU: 66599112](https://maedler.in/product/clamping-lever-din-99-stainless-diameter-16mm-ball-diameter-25mm-sku-66599112/): Material: Stainless steel 1.4305 (AISI 303), matt finish blasted. Handle slanted, with metric thread. - [Clamping lever DIN 99 stainless diameter 13mm ball diameter 20mm SKU: 66599110](https://maedler.in/product/clamping-lever-din-99-stainless-diameter-13mm-ball-diameter-20mm-sku-66599110/): Material: Stainless steel 1.4305 (AISI 303), matt finish blasted. Handle slanted, with metric thread. - [Clamping lever DIN 99 stainless diameter 10mm ball diameter 16mm SKU: 66599108](https://maedler.in/product/clamping-lever-din-99-stainless-diameter-10mm-ball-diameter-16mm-sku-66599108/): Material: Stainless steel 1.4305 (AISI 303), matt finish blasted. Handle slanted, with metric thread. - [Clamping lever DIN 99 stainless diameter 8mm ball diameter 12mm SKU: 66599106](https://maedler.in/product/clamping-lever-din-99-stainless-diameter-8mm-ball-diameter-12mm-sku-66599106/): Material: Stainless steel 1.4305 (AISI 303), matt finish blasted. Handle slanted, with metric thread. - [Adjustable clamping lever type K lever length 78 mm shaft length 30 mm external thread M8 x 25mm SKU: 66578830](https://maedler.in/product/adjustable-clamping-lever-type-k-lever-length-78-mm-shaft-length-30-mm-external-thread-m8-x-25mm-sku-66578830/): Material: Handle: Zinc die-cast, plastic coated black RAL 9005, texture finish. Screw with shaft: Stainless steel 1.4305 (AISI 303).These clamp levers with external thread and long shaft d5 x h2 may replace allen screws DIN 912 (ISO 4762) at many applications, for example at clamp collars. To be used preferably when the clamping range is limited or if a specific clamping position is required. By lifting the handle, the serrations are disengaged. Now the handle can be turned into the best direction, for tightening, for remaining or loosening. When the lever is released, the serration re-engages automatically.Temperature resistant up to +90°C. - [Adjustable clamping lever type K lever length 45 mm shaft length 20 mm external thread M6 x 18mm SKU: 66578620](https://maedler.in/product/adjustable-clamping-lever-type-k-lever-length-45-mm-shaft-length-20-mm-external-thread-m6-x-18mm-sku-66578620/): Material: Handle: Zinc die-cast, plastic coated black RAL 9005, texture finish. Screw with shaft: Stainless steel 1.4305 (AISI 303).These clamp levers with external thread and long shaft d5 x h2 may replace allen screws DIN 912 (ISO 4762) at many applications, for example at clamp collars. To be used preferably when the clamping range is limited or if a specific clamping position is required. By lifting the handle, the serrations are disengaged. Now the handle can be turned into the best direction, for tightening, for remaining or loosening. When the lever is released, the serration re-engages automatically.Temperature resistant up to +90°C. - [Adjustable clamping lever type K lever length 45 mm shaft length 19 mm external thread M6 x 16mm SKU: 66578619](https://maedler.in/product/adjustable-clamping-lever-type-k-lever-length-45-mm-shaft-length-19-mm-external-thread-m6-x-16mm-sku-66578619/): Material: Handle: Zinc die-cast, plastic coated black RAL 9005, texture finish. Screw with shaft: Stainless steel 1.4305 (AISI 303).These clamp levers with external thread and long shaft d5 x h2 may replace allen screws DIN 912 (ISO 4762) at many applications, for example at clamp collars. To be used preferably when the clamping range is limited or if a specific clamping position is required. By lifting the handle, the serrations are disengaged. Now the handle can be turned into the best direction, for tightening, for remaining or loosening. When the lever is released, the serration re-engages automatically.Temperature resistant up to +90°C. - [Adjustable clamping lever type K lever length 45 mm shaft length 18 mm external thread M6 x 16mm SKU: 66578618](https://maedler.in/product/adjustable-clamping-lever-type-k-lever-length-45-mm-shaft-length-18-mm-external-thread-m6-x-16mm-sku-66578618/): Material: Handle: Zinc die-cast, plastic coated black RAL 9005, texture finish. Screw with shaft: Stainless steel 1.4305 (AISI 303).These clamp levers with external thread and long shaft d5 x h2 may replace allen screws DIN 912 (ISO 4762) at many applications, for example at clamp collars. To be used preferably when the clamping range is limited or if a specific clamping position is required. By lifting the handle, the serrations are disengaged. Now the handle can be turned into the best direction, for tightening, for remaining or loosening. When the lever is released, the serration re-engages automatically.Temperature resistant up to +90°C. - [Adjustable clamping lever type K lever length 45 mm shaft length 16 mm external thread M5 x 16mm SKU: 66578516](https://maedler.in/product/adjustable-clamping-lever-type-k-lever-length-45-mm-shaft-length-16-mm-external-thread-m5-x-16mm-sku-66578516/): Material: Handle: Zinc die-cast, plastic coated black RAL 9005, texture finish. Screw with shaft: Stainless steel 1.4305 (AISI 303).These clamp levers with external thread and long shaft d5 x h2 may replace allen screws DIN 912 (ISO 4762) at many applications, for example at clamp collars. To be used preferably when the clamping range is limited or if a specific clamping position is required. By lifting the handle, the serrations are disengaged. Now the handle can be turned into the best direction, for tightening, for remaining or loosening. When the lever is released, the serration re-engages automatically.Temperature resistant up to +90°C. - [Adjustable clamping lever type K lever length 30 mm shaft length 15 mm external thread M5 x 14mm SKU: 66578515](https://maedler.in/product/adjustable-clamping-lever-type-k-lever-length-30-mm-shaft-length-15-mm-external-thread-m5-x-14mm-sku-66578515/): Material: Handle: Zinc die-cast, plastic coated black RAL 9005, texture finish. Screw with shaft: Stainless steel 1.4305 (AISI 303).These clamp levers with external thread and long shaft d5 x h2 may replace allen screws DIN 912 (ISO 4762) at many applications, for example at clamp collars. To be used preferably when the clamping range is limited or if a specific clamping position is required. By lifting the handle, the serrations are disengaged. Now the handle can be turned into the best direction, for tightening, for remaining or loosening. When the lever is released, the serration re-engages automatically.Temperature resistant up to +90°C. - [Adjustable clamping lever type K lever length 30 mm shaft length 13 mm external thread M5 x 14mm SKU: 66578513](https://maedler.in/product/adjustable-clamping-lever-type-k-lever-length-30-mm-shaft-length-13-mm-external-thread-m5-x-14mm-sku-66578513/): Material: Handle: Zinc die-cast, plastic coated black RAL 9005, texture finish. Screw with shaft: Stainless steel 1.4305 (AISI 303).These clamp levers with external thread and long shaft d5 x h2 may replace allen screws DIN 912 (ISO 4762) at many applications, for example at clamp collars. To be used preferably when the clamping range is limited or if a specific clamping position is required. By lifting the handle, the serrations are disengaged. Now the handle can be turned into the best direction, for tightening, for remaining or loosening. When the lever is released, the serration re-engages automatically.Temperature resistant up to +90°C. - [Adjustable clamping lever type K lever length 30 mm shaft length 12 mm external thread M4 x 12mm SKU: 66578412](https://maedler.in/product/adjustable-clamping-lever-type-k-lever-length-30-mm-shaft-length-12-mm-external-thread-m4-x-12mm-sku-66578412/): Material: Handle: Zinc die-cast, plastic coated black RAL 9005, texture finish. Screw with shaft: Stainless steel 1.4305 (AISI 303).These clamp levers with external thread and long shaft d5 x h2 may replace allen screws DIN 912 (ISO 4762) at many applications, for example at clamp collars. To be used preferably when the clamping range is limited or if a specific clamping position is required. By lifting the handle, the serrations are disengaged. Now the handle can be turned into the best direction, for tightening, for remaining or loosening. When the lever is released, the serration re-engages automatically.Temperature resistant up to +90°C. - [Adjustable clamping lever type K lever length 22 mm shaft length 11 mm external thread M3 x 10mm SKU: 66578311](https://maedler.in/product/adjustable-clamping-lever-type-k-lever-length-22-mm-shaft-length-11-mm-external-thread-m3-x-10mm-sku-66578311/): Material: Handle: Zinc die-cast, plastic coated black RAL 9005, texture finish. Screw with shaft: Stainless steel 1.4305 (AISI 303).These clamp levers with external thread and long shaft d5 x h2 may replace allen screws DIN 912 (ISO 4762) at many applications, for example at clamp collars. To be used preferably when the clamping range is limited or if a specific clamping position is required. By lifting the handle, the serrations are disengaged. Now the handle can be turned into the best direction, for tightening, for remaining or loosening. When the lever is released, the serration re-engages automatically.Temperature resistant up to +90°C. - [Adjustable clamping lever 300 Version G with external thread M12 x 63 mm long lever length L1 = 92 mm SKU: 66578263](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m12-x-63-mm-long-lever-length-l1-92-mm-sku-66578263/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 Version G with external thread M12 x 50mm lever length L1 = 92mm SKU: 66578250](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m12-x-50mm-lever-length-l1-92mm-sku-66578250/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 Version G with external thread M12 x 40mm lever length L1 = 92mm SKU: 66578240](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m12-x-40mm-lever-length-l1-92mm-sku-66578240/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 Version G with external thread M12 x 32mm lever length L1 = 92mm SKU: 66578232](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m12-x-32mm-lever-length-l1-92mm-sku-66578232/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Eccentric clamp 927 Version B external thread M8 x 60 SKU: 66578226](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m8-x-60-sku-66578226/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version B external thread M8 x 50 SKU: 66578225](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m8-x-50-sku-66578225/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version B external thread M8 x 40 SKU: 66578224](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m8-x-40-sku-66578224/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version B external thread M8 x 35 SKU: 66578223](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m8-x-35-sku-66578223/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version B external thread M8 x 30 SKU: 66578222](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m8-x-30-sku-66578222/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version B external thread M8 x 25 SKU: 66578221](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m8-x-25-sku-66578221/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Excentric clamp 927 Version B internal thread M8 SKU: 66578220](https://maedler.in/product/excentric-clamp-927-version-b-internal-thread-m8-sku-66578220/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M8 x 60 SKU: 66578216](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m8-x-60-sku-66578216/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M8 x 50 SKU: 66578215](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m8-x-50-sku-66578215/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M8 x 40 SKU: 66578214](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m8-x-40-sku-66578214/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M8 x 35 SKU: 66578213](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m8-x-35-sku-66578213/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M8 x 30 SKU: 66578212](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m8-x-30-sku-66578212/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version A external thread M8 x 25 SKU: 66578211](https://maedler.in/product/eccentric-clamp-927-version-a-external-thread-m8-x-25-sku-66578211/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw and support Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Excentric clamp 927 Version A internal thread M8 SKU: 66578210](https://maedler.in/product/excentric-clamp-927-version-a-internal-thread-m8-sku-66578210/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Support washer: Zinc-plated steel, chromated. With knurled adjustable support washer with fine thread. Thus the clamping force and the lever position can be set exactly on the lever side. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Adjustable clamping lever 300 version G with external thread M10 x 63mm lever length L1 = 78mm SKU: 66578063](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m10-x-63mm-lever-length-l1-78mm-sku-66578063/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M10 x 50mm lever length L1 = 78mm SKU: 66578050](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m10-x-50mm-lever-length-l1-78mm-sku-66578050/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M10 x 40mm lever length L1 = 78mm SKU: 66578040](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m10-x-40mm-lever-length-l1-78mm-sku-66578040/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M10 x 32mm lever length L1 = 78mm SKU: 66578032](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m10-x-32mm-lever-length-l1-78mm-sku-66578032/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M10 x 25mm lever length L1 = 78mm SKU: 66578025](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m10-x-25mm-lever-length-l1-78mm-sku-66578025/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M10 x 20mm lever length L1 = 78mm SKU: 66578020](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m10-x-20mm-lever-length-l1-78mm-sku-66578020/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M8 x 40mm lever length L1 = 63mm SKU: 66577840](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m8-x-40mm-lever-length-l1-63mm-sku-66577840/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M8 x 32mm lever length L1 = 63mm SKU: 66577832](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m8-x-32mm-lever-length-l1-63mm-sku-66577832/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M8 x 25mm lever length L1 = 63mm SKU: 66577825](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m8-x-25mm-lever-length-l1-63mm-sku-66577825/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M8 x 20mm lever length L1 = 63mm SKU: 66577820](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m8-x-20mm-lever-length-l1-63mm-sku-66577820/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M6 x 32mm lever length L1= 63mm SKU: 66577816](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m6-x-32mm-lever-length-l1-63mm-sku-66577816/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M6 x 20mm lever length L1 = 63mm SKU: 66577810](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m6-x-20mm-lever-length-l1-63mm-sku-66577810/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M6 x 40mm lever length L1 = 45mm SKU: 66577640](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m6-x-40mm-lever-length-l1-45mm-sku-66577640/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M6 x 32mm lever length L1 = 45mm SKU: 66577632](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m6-x-32mm-lever-length-l1-45mm-sku-66577632/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M6 x 25mm lever length L1 = 45mm SKU: 66577625](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m6-x-25mm-lever-length-l1-45mm-sku-66577625/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M6 x 20mm lever length L1 = 45mm SKU: 66577620](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m6-x-20mm-lever-length-l1-45mm-sku-66577620/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M6 x 16mm lever length L1 = 45mm SKU: 66577616](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m6-x-16mm-lever-length-l1-45mm-sku-66577616/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M5 x 32mm lever length L1 = 45mm SKU: 66577532](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m5-x-32mm-lever-length-l1-45mm-sku-66577532/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M5 x 25mm lever length L1 = 45mm SKU: 66577525](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m5-x-25mm-lever-length-l1-45mm-sku-66577525/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M5 x 20mm lever length L1 = 45mm SKU: 66577520](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m5-x-20mm-lever-length-l1-45mm-sku-66577520/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M5 x 16mm lever length L1 = 45mm SKU: 66577516](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m5-x-16mm-lever-length-l1-45mm-sku-66577516/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M5 x 12mm lever length L1 = 45mm SKU: 66577512](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m5-x-12mm-lever-length-l1-45mm-sku-66577512/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M5 x 20mm lever length L1 = 30mm SKU: 66577511](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m5-x-20mm-lever-length-l1-30mm-sku-66577511/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M5 x 12mm lever length L1 = 30mm SKU: 66577510](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m5-x-12mm-lever-length-l1-30mm-sku-66577510/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M4 x 20mm lever length L1 = 30mm SKU: 66577509](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m4-x-20mm-lever-length-l1-30mm-sku-66577509/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 300 version G with external thread M4 x 12mm lever length L1 = 30mm SKU: 66577508](https://maedler.in/product/adjustable-clamping-lever-300-version-g-with-external-thread-m4-x-12mm-lever-length-l1-30mm-sku-66577508/): Material: Screw insert and locking screw: Steel 5.8, black oxide finish. Handle: zinc diecast. Plastic coating: black. Disengaged by pulling. These adjustable clamping levers are the result of modern industrial design, and they are easy to operate, they also meet ergonomic demands. All such levers have proven to be ideal wherever parts have to be clamped in confined spaces or in a particular lever position. The insert is connected to the lever via serrations. Pulling the lever upwards disengages the serrations, allowing the lever to be turned to the ideal clamping position. When the lever is released, the serrations automatically re-engage. - [Adjustable clamping lever 120 version G with external thread M16 x 50mm long lever length L2 = 108mm SKU: 66576650](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m16-x-50mm-long-lever-length-l2-108mm-sku-66576650/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M16 x 40mm long lever length L2 = 108mm SKU: 66576640](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m16-x-40mm-long-lever-length-l2-108mm-sku-66576640/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Adjustable clamping lever 120 version G with external thread M16 x 32mm long lever length L2 = 108mm SKU: 66576632](https://maedler.in/product/adjustable-clamping-lever-120-version-g-with-external-thread-m16-x-32mm-long-lever-length-l2-108mm-sku-66576632/): Material: Handle: zinc die-cast. Threaded stud and locking screw: Steel, black oxide finish. Handle: Plastic coated, colour black RAL 9005. Disengaged by pulling. Version G = Handle slanted, with metric-threaded stud. The clamping levers 120 have two main advantages: 1) As they are adjustable, they are very versatile in use. 2) They are designed to suit the form and appearance of modern industrial products. The threaded insert is connected to the lever via the serration and can be released by pulling Note: This clamping lever has proven ideal wherever the swivel range is limited or where a specific lever position is most convenient for the operator. The lever also features a modern design. By pulling the lever, the serrations are disengaged. Now the handle can be turned into any direction and the threaded insert can be screwed in or out by turning the locking screw. When the lever is released, the serration re-engages automatically because of the spring tension. - [Eccentric clamp 927 Version B external thread M6 x 50 SKU: 66576326](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m6-x-50-sku-66576326/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version B external thread M6 x 40 SKU: 66576325](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m6-x-40-sku-66576325/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version B external thread M6 x 35 SKU: 66576324](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m6-x-35-sku-66576324/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version B external thread M6 x 30 SKU: 66576323](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m6-x-30-sku-66576323/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [Eccentric clamp 927 Version B external thread M6 x 25 SKU: 66576322](https://maedler.in/product/eccentric-clamp-927-version-b-external-thread-m6-x-25-sku-66576322/): Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Grub screw: Zinc-plated steel, chromated. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force, can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present. For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN. - [V-belt pulley material cast iron for taper-bush 3020 profile XPB, SPB and B (17) 2 grooves nominal diameter 400mm SKU: 15524000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-400mm-sku-15524000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 315mm SKU: 15523100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-315mm-sku-15523100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 280mm SKU: 15522800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-280mm-sku-15522800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 250mm SKU: 15522500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-250mm-sku-15522500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 224mm SKU: 15522200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-224mm-sku-15522200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 200mm SKU: 15522000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-200mm-sku-15522000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 2 grooves nominal diameter 180mm SKU: 15521800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-180mm-sku-15521800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 2 grooves nominal diameter 160mm SKU: 15521600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-160mm-sku-15521600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 2 grooves nominal diameter 140mm SKU: 15521400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-140mm-sku-15521400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 2 grooves nominal diameter 125mm SKU: 15521200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-125mm-sku-15521200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 2 grooves nominal diameter 112mm SKU: 15521100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-112mm-sku-15521100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 2 grooves nominal diameter 100mm SKU: 15521000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-100mm-sku-15521000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 280mm SKU: 15512800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-280mm-sku-15512800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 250mm SKU: 15512500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-250mm-sku-15512500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 224mm SKU: 15512200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-224mm-sku-15512200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 200mm SKU: 15512000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-200mm-sku-15512000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 180mm SKU: 15511800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-180mm-sku-15511800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 160mm SKU: 15511600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-160mm-sku-15511600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 140mm SKU: 15511400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-140mm-sku-15511400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 125mm SKU: 15511200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-125mm-sku-15511200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 112mm SKU: 15511100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-112mm-sku-15511100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 1 groove nominal diameter 100mm SKU: 15511000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-100mm-sku-15511000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 315mm SKU: 15433100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-315mm-sku-15433100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 280mm SKU: 15432800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-280mm-sku-15432800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 250mm SKU: 15432500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-250mm-sku-15432500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 224mm SKU: 15432200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-224mm-sku-15432200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 200mm SKU: 15432000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-200mm-sku-15432000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 180mm SKU: 15431800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-180mm-sku-15431800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 180mm SKU: 15431600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-180mm-sku-15431600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 140mm SKU: 15431400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-140mm-sku-15431400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 125mm SKU: 15431200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-125mm-sku-15431200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 112mm SKU: 15431100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-112mm-sku-15431100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 100mm SKU: 15431000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-100mm-sku-15431000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 90mm SKU: 15430900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-90mm-sku-15430900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 3 grooves nominal diameter 80mm SKU: 15430800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-80mm-sku-15430800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 315mm SKU: 15423100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-315mm-sku-15423100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 280mm SKU: 15422800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-280mm-sku-15422800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 250mm SKU: 15422500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-250mm-sku-15422500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 224mm SKU: 15422200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-224mm-sku-15422200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 200mm SKU: 15422000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-200mm-sku-15422000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 180mm SKU: 15421800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-180mm-sku-15421800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 160mm SKU: 15421600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-160mm-sku-15421600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 140mm SKU: 15421400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-140mm-sku-15421400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 125mm SKU: 15421200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-125mm-sku-15421200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 112mm SKU: 15421100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-112mm-sku-15421100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 100mm SKU: 15421000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-100mm-sku-15421000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 90mm SKU: 15420900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-90mm-sku-15420900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 80mm SKU: 15420800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-80mm-sku-15420800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 2 grooves nominal diameter 71mm SKU: 15420700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-2-grooves-nominal-diameter-71mm-sku-15420700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 315mm SKU: 15413100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-315mm-sku-15413100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 280mm SKU: 15412800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-280mm-sku-15412800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 250mm SKU: 15412500](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-250mm-sku-15412500/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 224mm SKU: 15412200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-224mm-sku-15412200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 200mm SKU: 15412000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-200mm-sku-15412000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 180mm SKU: 15411800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-180mm-sku-15411800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 160mm SKU: 15411600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-160mm-sku-15411600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 140mm SKU: 15411400](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-140mm-sku-15411400/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 125mm SKU: 15411200](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-125mm-sku-15411200/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 112mm SKU: 15411100](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-112mm-sku-15411100/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 100mm SKU: 15411000](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-100mm-sku-15411000/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 90mm SKU: 15410900](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-90mm-sku-15410900/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 80mm SKU: 15410800](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-80mm-sku-15410800/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 71mm SKU: 15410700](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-71mm-sku-15410700/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material aluminium profile XPB, SPB and B (17) 1 groove nominal diameter 63mm SKU: 15410600](https://maedler.in/product/v-belt-pulley-material-aluminium-profile-xpb-spb-and-b-17-1-groove-nominal-diameter-63mm-sku-15410600/): Material: Special Light Alloy with Cast-Iron core. V-Belt Pulleys with nominal diametre including 250 mm are supplied as solid pulley, from 280 mm Ø as spoked pulley. 1) can only be used with standard V-belt DIN 2215 . * without cast-iron hub reinforcement. - [V-belt pulley material cast iron for taper-bush 3020 profile XPA, SPA and A (13) 3 grooves nominal diameter 315mm SKU: 15333100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-315mm-sku-15333100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 280mm SKU: 15332800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-280mm-sku-15332800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 250mm SKU: 15332500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-250mm-sku-15332500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 224mm SKU: 15332200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-224mm-sku-15332200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 200mm SKU: 15332000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-200mm-sku-15332000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 180mm SKU: 15331800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-180mm-sku-15331800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 160mm SKU: 15331600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-160mm-sku-15331600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 3 grooves nominal diameter 140mm SKU: 15331400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-140mm-sku-15331400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 3 grooves nominal diameter 125mm SKU: 15331200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-125mm-sku-15331200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 3 grooves nominal diameter 112mm SKU: 15331100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-112mm-sku-15331100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 3 grooves nominal diameter 100mm SKU: 15331000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-100mm-sku-15331000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 3 grooves nominal diameter 90mm SKU: 15330900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-90mm-sku-15330900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPA, SPA and A (13) 3 grooves nominal diameter 80mm SKU: 15330800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpa-spa-and-a-13-3-grooves-nominal-diameter-80mm-sku-15330800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 315mm SKU: 15323100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-315mm-sku-15323100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 280mm SKU: 15322800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-280mm-sku-15322800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 250mm SKU: 15322500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-250mm-sku-15322500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 224mm SKU: 15322200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-224mm-sku-15322200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPA, SPA and A (13) 2 grooves nominal diameter 200mm SKU: 15322000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-200mm-sku-15322000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 2 grooves nominal diameter 180mm SKU: 15321800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-180mm-sku-15321800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 2 grooves nominal diameter 160mm SKU: 15321600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-160mm-sku-15321600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 2 grooves nominal diameter 140mm SKU: 15321400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-140mm-sku-15321400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 2 grooves nominal diameter 125mm SKU: 15321200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-125mm-sku-15321200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 2 grooves nominal diameter 112mm SKU: 15321100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-112mm-sku-15321100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 2 grooves nominal diameter 100mm SKU: 15321000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-100mm-sku-15321000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 2 grooves nominal diameter 90mm SKU: 15320900](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-90mm-sku-15320900/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1210 profile XPA, SPA and A (13) 2 grooves nominal diameter 80mm SKU: 15320800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1210-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-80mm-sku-15320800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1108 profile XPA, SPA and A (13) 2 grooves nominal diameter 71mm SKU: 15320700](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1108-profile-xpa-spa-and-a-13-2-grooves-nominal-diameter-71mm-sku-15320700/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 315mm SKU: 15313100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-315mm-sku-15313100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 280mm SKU: 15312800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-280mm-sku-15312800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 250mm SKU: 15312500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-250mm-sku-15312500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 224mm SKU: 15312200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-224mm-sku-15312200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 200mm SKU: 15312000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-200mm-sku-15312000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 180mm SKU: 15311800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-180mm-sku-15311800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 160mm SKU: 15311600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-160mm-sku-15311600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 140mm SKU: 15311400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-140mm-sku-15311400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPA, SPA and A (13) 1 groove nominal diameter 125mm SKU: 15311200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpa-spa-and-a-13-1-groove-nominal-diameter-125mm-sku-15311200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Cabinet U handle 725 length 86mm material PA HT SKU: 66660201](https://maedler.in/product/cabinet-u-handle-725-length-86mm-material-pa-ht-sku-66660201/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 525 length 117 mm material plastic schwarz SKU: 66660200](https://maedler.in/product/cabinet-u-handle-525-length-117-mm-material-plastic-schwarz-sku-66660200/): Material: Plastic Duroplast PF31, black glossy finish, flash mark thoroughly polished. A special feature is that the flash mark on this handle is not visible nor can it be felt. The large tube diameter and the brass threaded bush lead to an immense rigidity. Temperature resistant up to 110°C. - [Cabinet U handle 725 length 300mm material PP SKU: 66660108](https://maedler.in/product/cabinet-u-handle-725-length-300mm-material-pp-sku-66660108/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 725 length 179mm material PP SKU: 66660107](https://maedler.in/product/cabinet-u-handle-725-length-179mm-material-pp-sku-66660107/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 725 length 150mm material PP SKU: 66660106](https://maedler.in/product/cabinet-u-handle-725-length-150mm-material-pp-sku-66660106/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 725 length 132mm material PP SKU: 66660105](https://maedler.in/product/cabinet-u-handle-725-length-132mm-material-pp-sku-66660105/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 725 length 120mm material PP SKU: 66660104](https://maedler.in/product/cabinet-u-handle-725-length-120mm-material-pp-sku-66660104/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 725 length 117mm material PP SKU: 66660103](https://maedler.in/product/cabinet-u-handle-725-length-117mm-material-pp-sku-66660103/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 725 length 117mm material PP SKU: 66660102](https://maedler.in/product/cabinet-u-handle-725-length-117mm-material-pp-sku-66660102/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 725 length 86mm material PP SKU: 66660101](https://maedler.in/product/cabinet-u-handle-725-length-86mm-material-pp-sku-66660101/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 525 length 86mm material plastic schwarz SKU: 66660100](https://maedler.in/product/cabinet-u-handle-525-length-86mm-material-plastic-schwarz-sku-66660100/): Material: Plastic Duroplast PF31, black glossy finish, flash mark thoroughly polished. A special feature is that the flash mark on this handle is not visible nor can it be felt. The large tube diameter and the brass threaded bush lead to an immense rigidity. Temperature resistant up to 110°C. - [Cabinet U handle 528 length 235mm material PP SKU: 66654800](https://maedler.in/product/cabinet-u-handle-528-length-235mm-material-pp-sku-66654800/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Cabinet U handle 528 length 179mm material PP SKU: 66654600](https://maedler.in/product/cabinet-u-handle-528-length-179mm-material-pp-sku-66654600/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Cabinet U handle 528 length 132mm material PP SKU: 66654400](https://maedler.in/product/cabinet-u-handle-528-length-132mm-material-pp-sku-66654400/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Cabinet U handle 528 length 117mm material PP SKU: 66654200](https://maedler.in/product/cabinet-u-handle-528-length-117mm-material-pp-sku-66654200/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Cabinet U handle 528 length 94mm material PP SKU: 66654000](https://maedler.in/product/cabinet-u-handle-528-length-94mm-material-pp-sku-66654000/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Cabinet U handle 528 length 235mm material PA SKU: 66653800](https://maedler.in/product/cabinet-u-handle-528-length-235mm-material-pa-sku-66653800/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Cabinet U handle 528 length 179mm material PA SKU: 66653600](https://maedler.in/product/cabinet-u-handle-528-length-179mm-material-pa-sku-66653600/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Cabinet U handle 528 length 132mm material PA SKU: 66653400](https://maedler.in/product/cabinet-u-handle-528-length-132mm-material-pa-sku-66653400/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Cabinet U handle 528 length 117mm material PA SKU: 66653200](https://maedler.in/product/cabinet-u-handle-528-length-117mm-material-pa-sku-66653200/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Cabinet U handle 528 length 94mm material PA SKU: 66653000](https://maedler.in/product/cabinet-u-handle-528-length-94mm-material-pa-sku-66653000/): Material: Version Plastic (PA): Thermoplast (Polyamide), glass-fibre reinforced, black. Temperature resistant up to 150° C. Version Plastic (PP): Thermoplast (Polypropylene), glass-fibre reinforced, black. Temperature resistant up to 100°C. Cabinet handles 528 are mounted from the operating side with socket-head cap screws. Cabinet handles in the PP (Polypropylene) version are cost efficient elements which usually still meet all requirements. - [Turret lever 2130 St hub diameter 80mm ball knob made from plastic SKU: 66652000](https://maedler.in/product/turret-lever-2130-st-hub-diameter-80mm-ball-knob-made-from-plastic-sku-66652000/): Material: Steel, precision turned and black oxide finished. Ball knobs made from plastic. - [Turret lever 2130 St hub diameter 72mm ball knob made from plastic SKU: 66651800](https://maedler.in/product/turret-lever-2130-st-hub-diameter-72mm-ball-knob-made-from-plastic-sku-66651800/): Material: Steel, precision turned and black oxide finished. Ball knobs made from plastic. - [Turret lever 2130 St hub diameter 65mm ball knob made from plastic SKU: 66651600](https://maedler.in/product/turret-lever-2130-st-hub-diameter-65mm-ball-knob-made-from-plastic-sku-66651600/): Material: Steel, precision turned and black oxide finished. Ball knobs made from plastic. - [Turret lever 2130 St hub diameter 60mm ball knob made from plastic SKU: 66651500](https://maedler.in/product/turret-lever-2130-st-hub-diameter-60mm-ball-knob-made-from-plastic-sku-66651500/): Material: Steel, precision turned and black oxide finished. Ball knobs made from plastic. - [Turret lever 2130 St hub diameter 55mm ball knob made from plastic SKU: 66651400](https://maedler.in/product/turret-lever-2130-st-hub-diameter-55mm-ball-knob-made-from-plastic-sku-66651400/): Material: Steel, precision turned and black oxide finished. Ball knobs made from plastic. - [Turret lever 2130 St hub diameter 50mm ball knob made from plastic SKU: 66651200](https://maedler.in/product/turret-lever-2130-st-hub-diameter-50mm-ball-knob-made-from-plastic-sku-66651200/): Material: Steel, precision turned and black oxide finished. Ball knobs made from plastic. - [Tubular handle 333.1 length 600 mm d1 28 mm aluminium black plastic coated SKU: 66650592](https://maedler.in/product/tubular-handle-333-1-length-600-mm-d1-28-mm-aluminium-black-plastic-coated-sku-66650592/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 500 mm d1 28 mm aluminium black plastic coated SKU: 66650590](https://maedler.in/product/tubular-handle-333-1-length-500-mm-d1-28-mm-aluminium-black-plastic-coated-sku-66650590/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 400 mm d1 28 mm aluminium black plastic coated SKU: 66650588](https://maedler.in/product/tubular-handle-333-1-length-400-mm-d1-28-mm-aluminium-black-plastic-coated-sku-66650588/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 300 mm d1 28 mm aluminium black plastic coated SKU: 66650586](https://maedler.in/product/tubular-handle-333-1-length-300-mm-d1-28-mm-aluminium-black-plastic-coated-sku-66650586/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 250 mm d1 28 mm aluminium black plastic coated SKU: 66650584](https://maedler.in/product/tubular-handle-333-1-length-250-mm-d1-28-mm-aluminium-black-plastic-coated-sku-66650584/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 200 mm d1 28 mm aluminium black plastic coated SKU: 66650582](https://maedler.in/product/tubular-handle-333-1-length-200-mm-d1-28-mm-aluminium-black-plastic-coated-sku-66650582/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 400 mm d1 20 mm aluminium black plastic coated SKU: 66650580](https://maedler.in/product/tubular-handle-333-1-length-400-mm-d1-20-mm-aluminium-black-plastic-coated-sku-66650580/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 300 mm d1 20 mm aluminium black plastic coated SKU: 66650578](https://maedler.in/product/tubular-handle-333-1-length-300-mm-d1-20-mm-aluminium-black-plastic-coated-sku-66650578/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 250 mm d1 20 mm aluminium black plastic coated SKU: 66650576](https://maedler.in/product/tubular-handle-333-1-length-250-mm-d1-20-mm-aluminium-black-plastic-coated-sku-66650576/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 200 mm d1 20 mm aluminium black plastic coated SKU: 66650574](https://maedler.in/product/tubular-handle-333-1-length-200-mm-d1-20-mm-aluminium-black-plastic-coated-sku-66650574/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 180 mm d1 20 mm aluminium black plastic coated SKU: 66650572](https://maedler.in/product/tubular-handle-333-1-length-180-mm-d1-20-mm-aluminium-black-plastic-coated-sku-66650572/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 600 mm d1 28mm made from anodized aluminium SKU: 66650562](https://maedler.in/product/tubular-handle-333-1-length-600-mm-d1-28mm-made-from-anodized-aluminium-sku-66650562/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 500 mm d1 28mm made from anodized aluminium SKU: 66650560](https://maedler.in/product/tubular-handle-333-1-length-500-mm-d1-28mm-made-from-anodized-aluminium-sku-66650560/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 400 mm d1 28mm made from anodized aluminium SKU: 66650558](https://maedler.in/product/tubular-handle-333-1-length-400-mm-d1-28mm-made-from-anodized-aluminium-sku-66650558/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 300 mm d1 28mm made from anodized aluminium SKU: 66650556](https://maedler.in/product/tubular-handle-333-1-length-300-mm-d1-28mm-made-from-anodized-aluminium-sku-66650556/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 250 mm d1 28mm made from anodized aluminium SKU: 66650554](https://maedler.in/product/tubular-handle-333-1-length-250-mm-d1-28mm-made-from-anodized-aluminium-sku-66650554/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 200 mm d1 28mm made from anodized aluminium SKU: 66650552](https://maedler.in/product/tubular-handle-333-1-length-200-mm-d1-28mm-made-from-anodized-aluminium-sku-66650552/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 400 mm d1 20mm made from anodized aluminium SKU: 66650550](https://maedler.in/product/tubular-handle-333-1-length-400-mm-d1-20mm-made-from-anodized-aluminium-sku-66650550/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 300 mm d1 20mm made from anodized aluminium SKU: 66650548](https://maedler.in/product/tubular-handle-333-1-length-300-mm-d1-20mm-made-from-anodized-aluminium-sku-66650548/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 250 mm d1 20mm made from anodized aluminium SKU: 66650546](https://maedler.in/product/tubular-handle-333-1-length-250-mm-d1-20mm-made-from-anodized-aluminium-sku-66650546/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 200 mm d1 20mm made from anodized aluminium SKU: 66650544](https://maedler.in/product/tubular-handle-333-1-length-200-mm-d1-20mm-made-from-anodized-aluminium-sku-66650544/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333.1 length 180 mm d1 20mm made from anodized aluminium SKU: 66650542](https://maedler.in/product/tubular-handle-333-1-length-180-mm-d1-20mm-made-from-anodized-aluminium-sku-66650542/): Material: Grip tube Ø20mm / Ø28mm x 1.5mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 600 mm aluminium black plastic coated SKU: 66650532](https://maedler.in/product/tubular-handle-333-length-600-mm-aluminium-black-plastic-coated-sku-66650532/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 500 mm aluminium black plastic coated SKU: 66650530](https://maedler.in/product/tubular-handle-333-length-500-mm-aluminium-black-plastic-coated-sku-66650530/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 400 mm aluminium black plastic coated SKU: 66650528](https://maedler.in/product/tubular-handle-333-length-400-mm-aluminium-black-plastic-coated-sku-66650528/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 300 mm aluminium black plastic coated SKU: 66650526](https://maedler.in/product/tubular-handle-333-length-300-mm-aluminium-black-plastic-coated-sku-66650526/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 250 mm aluminium black plastic coated SKU: 66650524](https://maedler.in/product/tubular-handle-333-length-250-mm-aluminium-black-plastic-coated-sku-66650524/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 200 mm aluminium black plastic coated SKU: 66650522](https://maedler.in/product/tubular-handle-333-length-200-mm-aluminium-black-plastic-coated-sku-66650522/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 600 mm made from anodized aluminium SKU: 66650512](https://maedler.in/product/tubular-handle-333-length-600-mm-made-from-anodized-aluminium-sku-66650512/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 500 mm made from anodized aluminium SKU: 66650510](https://maedler.in/product/tubular-handle-333-length-500-mm-made-from-anodized-aluminium-sku-66650510/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 400 mm made from anodized aluminium SKU: 66650508](https://maedler.in/product/tubular-handle-333-length-400-mm-made-from-anodized-aluminium-sku-66650508/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 300 mm made from anodized aluminium SKU: 66650506](https://maedler.in/product/tubular-handle-333-length-300-mm-made-from-anodized-aluminium-sku-66650506/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 250 mm made from anodized aluminium SKU: 66650504](https://maedler.in/product/tubular-handle-333-length-250-mm-made-from-anodized-aluminium-sku-66650504/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Tubular handle 333 length 200 mm made from anodized aluminium SKU: 66650502](https://maedler.in/product/tubular-handle-333-length-200-mm-made-from-anodized-aluminium-sku-66650502/): Material: Grip tube Ø28mm x 1.5 mm made from Aluminium. Either natural coloured anodised or black plastic coated RAL 9005 matt. Feet made from zinc die cast, black plastic coated RAL 9005 matt. High stability for small sizes. Tube either aluminium silver or black. Grip tube fixed against turning with screws on the face ends (screws below bright grey removable plastic caps). Other sizes on request. - [Control lever with longer hub 2120 St shape E diameter 40mm SKU: 66644000](https://maedler.in/product/control-lever-with-longer-hub-2120-st-shape-e-diameter-40mm-sku-66644000/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic.Version E = lever slanted with thread. - [Control lever with longer hub 2120 St shape E diameter 36mm SKU: 66643600](https://maedler.in/product/control-lever-with-longer-hub-2120-st-shape-e-diameter-36mm-sku-66643600/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic.Version E = lever slanted with thread. - [Control lever with longer hub 2120 St shape E diameter 32mm SKU: 66643200](https://maedler.in/product/control-lever-with-longer-hub-2120-st-shape-e-diameter-32mm-sku-66643200/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic.Version E = lever slanted with thread. - [Control lever with longer hub 2120 St shape E diameter 28mm SKU: 66642800](https://maedler.in/product/control-lever-with-longer-hub-2120-st-shape-e-diameter-28mm-sku-66642800/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic.Version E = lever slanted with thread. - [Control lever with longer hub 2120 St shape E diameter 25mm SKU: 66642500](https://maedler.in/product/control-lever-with-longer-hub-2120-st-shape-e-diameter-25mm-sku-66642500/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic.Version E = lever slanted with thread. - [Control lever with longer hub 2120 St shape E diameter 22mm SKU: 66642200](https://maedler.in/product/control-lever-with-longer-hub-2120-st-shape-e-diameter-22mm-sku-66642200/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic.Version E = lever slanted with thread. - [Control lever with longer hub 2120 St shape E diameter 20mm SKU: 66642000](https://maedler.in/product/control-lever-with-longer-hub-2120-st-shape-e-diameter-20mm-sku-66642000/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic.Version E = lever slanted with thread. - [Gear lever handle 209 with cylindrical knob M14 l1 250mm seel zinc plated SKU: 66617500](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m14-l1-250mm-seel-zinc-plated-sku-66617500/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M14 l1 200mm steel zinc plated SKU: 66617400](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m14-l1-200mm-steel-zinc-plated-sku-66617400/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M12 l1 200mm steel zinc plated SKU: 66617300](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m12-l1-200mm-steel-zinc-plated-sku-66617300/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M12 l1 160mm steel zinc plated SKU: 66617200](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m12-l1-160mm-steel-zinc-plated-sku-66617200/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M10 l1 160mm steel zinc plated SKU: 66617100](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m10-l1-160mm-steel-zinc-plated-sku-66617100/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M10 l1 125mm steel zinc plated SKU: 66617000](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m10-l1-125mm-steel-zinc-plated-sku-66617000/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M8 l1 125mm steel zinc plated SKU: 66616900](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m8-l1-125mm-steel-zinc-plated-sku-66616900/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M8 l1 100mm steel zinc plated SKU: 66616800](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m8-l1-100mm-steel-zinc-plated-sku-66616800/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M6 l1 100mm steel zinc plated SKU: 66616700](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m6-l1-100mm-steel-zinc-plated-sku-66616700/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M6 l1 80mm steel zinc plated SKU: 66616600](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m6-l1-80mm-steel-zinc-plated-sku-66616600/): Material: Steel, zinc plated. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Control lever 223 St diameter 52mm ball knob made from plastic SKU: 66615200](https://maedler.in/product/control-lever-223-st-diameter-52mm-ball-knob-made-from-plastic-sku-66615200/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic. - [Control lever 223 St diameter 40mm ball knob made from plastic SKU: 66614000](https://maedler.in/product/control-lever-223-st-diameter-40mm-ball-knob-made-from-plastic-sku-66614000/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic. - [Control lever 223 St diameter 32mm ball knob made from plastic SKU: 66613200](https://maedler.in/product/control-lever-223-st-diameter-32mm-ball-knob-made-from-plastic-sku-66613200/): Material: Steel, precision turned and black oxide finished. Ball knob made from plastic. - [Gear lever handle 209 with ball knob M14 l1 250mm steel zinc plated SKU: 66607500](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m14-l1-250mm-steel-zinc-plated-sku-66607500/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M14 l1 200mm steel zinc plated SKU: 66607400](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m14-l1-200mm-steel-zinc-plated-sku-66607400/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M12 l1 200mm steel zinc plated SKU: 66607300](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m12-l1-200mm-steel-zinc-plated-sku-66607300/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M12 l1 160mm steel zinc plated SKU: 66607200](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m12-l1-160mm-steel-zinc-plated-sku-66607200/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M10 l1 160mm steel zinc plated SKU: 66607100](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m10-l1-160mm-steel-zinc-plated-sku-66607100/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M10 l1 125mm steel zinc plated SKU: 66607000](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m10-l1-125mm-steel-zinc-plated-sku-66607000/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M8 l1 125mm steel zinc plated SKU: 66606900](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m8-l1-125mm-steel-zinc-plated-sku-66606900/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M8 l1 100mm steel zinc plated SKU: 66606800](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m8-l1-100mm-steel-zinc-plated-sku-66606800/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M6 l1 100mm steel zinc plated SKU: 66606700](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m6-l1-100mm-steel-zinc-plated-sku-66606700/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M6 l1 80mm steel zinc plated SKU: 66606600](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m6-l1-80mm-steel-zinc-plated-sku-66606600/): Material: Steel, zinc plated. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Adjustable clamping lever 300.5 version IS-G with external thread M10x63mm lever length L1 = 78mm stainless steel SKU: 66599744](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m10x63mm-lever-length-l1-78mm-stainless-steel-sku-66599744/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M10x50mm lever length L1 = 78mm stainless steel SKU: 66599743](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m10x50mm-lever-length-l1-78mm-stainless-steel-sku-66599743/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M10x40mm lever length L1 = 78mm stainless steel SKU: 66599742](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m10x40mm-lever-length-l1-78mm-stainless-steel-sku-66599742/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M10x32mm lever length L1 = 78mm stainless steel SKU: 66599741](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m10x32mm-lever-length-l1-78mm-stainless-steel-sku-66599741/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M10x25mm lever length L1 = 78mm stainless steel SKU: 66599740](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m10x25mm-lever-length-l1-78mm-stainless-steel-sku-66599740/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M10x20mm lever length L1 = 78mm stainless steel SKU: 66599739](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m10x20mm-lever-length-l1-78mm-stainless-steel-sku-66599739/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M8x63mm lever length L1 = 63mm stainless steel SKU: 66599738](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m8x63mm-lever-length-l1-63mm-stainless-steel-sku-66599738/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M8x50mm lever length L1 = 63mm stainless steel SKU: 66599737](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m8x50mm-lever-length-l1-63mm-stainless-steel-sku-66599737/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Adjustable clamping lever 300.5 version IS-G with external thread M8x40mm lever length L1 = 63mm stainless steel SKU: 66599736](https://maedler.in/product/adjustable-clamping-lever-300-5-version-is-g-with-external-thread-m8x40mm-lever-length-l1-63mm-stainless-steel-sku-66599736/): Material: Screwed insert and set screw, stainless steel 1.4305 (AISI 303). Grip body: Stainless steel 1.4308 (CF-8), matt blasted. The design of the adjustable clamping levers accommodates the needs of modernindustrial products, not just in terms of the user-friendly design of the gripbut also the ergonomic requirements. Just like all other adjustable clampinglevers, these ones are to be used preferably when the clamping range is limitedor if a specific clamping position is required. The thread insert is connected tothe handle via splines and can be removed.By lifting (pulling) the handle the splines work loose and the clamping lever canbe turned to the most suitable clamping position. Letting go causes the handleto engage automatically. - [Polyurethane timing belt T2.5 width 6mm Lw 500 200 teeth 6 T2.5/500 SKU: 16061700](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-500-200-teeth-6-t2-5-500-sku-16061700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 480 192 teeth 6 T2.5/480 SKU: 16061500](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-480-192-teeth-6-t2-5-480-sku-16061500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 420 168 teeth 6 T2.5/420 SKU: 16061400](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-420-168-teeth-6-t2-5-420-sku-16061400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 380 152 teeth 6 T2.5/380 SKU: 16061300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-380-152-teeth-6-t2-5-380-sku-16061300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 330 132 teeth 6 T2.5/330 SKU: 16061200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-330-132-teeth-6-t2-5-330-sku-16061200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 317.5 127 teeth 6 T2.5/317.5 SKU: 16061100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-317-5-127-teeth-6-t2-5-317-5-sku-16061100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 305 122 teeth 6 T2.5/305 SKU: 16061000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-305-122-teeth-6-t2-5-305-sku-16061000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 285 114 teeth 6 T2.5/285 SKU: 16060900](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-285-114-teeth-6-t2-5-285-sku-16060900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 265 106 teeth 6 T2.5/265 SKU: 16060800](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-265-106-teeth-6-t2-5-265-sku-16060800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 245 98 teeth 6 T2.5/245 SKU: 16060700](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-245-98-teeth-6-t2-5-245-sku-16060700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 230 92 teeth 6 T2.5/230 SKU: 16060600](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-230-92-teeth-6-t2-5-230-sku-16060600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 200 80 teeth 6 T2.5/200 SKU: 16060500](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-200-80-teeth-6-t2-5-200-sku-16060500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 177.5mm 71 teeth 6 T2.5/177,5 SKU: 16060400](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-177-5mm-71-teeth-6-t2-5-1775-sku-16060400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 160mm 64 teeth 6 T2.5/160 SKU: 16060300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-160mm-64-teeth-6-t2-5-160-sku-16060300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 145mm 58 teeth 6 T2.5/145 SKU: 16060200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-145mm-58-teeth-6-t2-5-145-sku-16060200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 120mm 48 teeth 6 T2.5/120 SKU: 16060100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-120mm-48-teeth-6-t2-5-120-sku-16060100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm 6 T2.5 open length SKU: 16060000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-6-t2-5-open-length-sku-16060000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Timing belt pulley T2.5 material polyacetal resin 96 teeth for belt width 6mm SKU: 16059600](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-96-teeth-for-belt-width-6mm-sku-16059600/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 84 teeth for belt width 6mm SKU: 16058400](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-84-teeth-for-belt-width-6mm-sku-16058400/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 72 teeth for belt width 6mm SKU: 16057200](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-72-teeth-for-belt-width-6mm-sku-16057200/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 60 teeth for belt width 6mm SKU: 16056000](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-60-teeth-for-belt-width-6mm-sku-16056000/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 48 teeth for belt width 6mm SKU: 16054800](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-48-teeth-for-belt-width-6mm-sku-16054800/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 40 teeth for belt width 6mm SKU: 16054000](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-40-teeth-for-belt-width-6mm-sku-16054000/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 36 teeth for belt width 6mm SKU: 16053600](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-36-teeth-for-belt-width-6mm-sku-16053600/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 32 teeth for belt width 6mm SKU: 16053200](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-32-teeth-for-belt-width-6mm-sku-16053200/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 28 teeth for belt width 6mm SKU: 16052800](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-28-teeth-for-belt-width-6mm-sku-16052800/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 25 teeth for belt width 6mm SKU: 16052500](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-25-teeth-for-belt-width-6mm-sku-16052500/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 22 teeth for belt width 6mm SKU: 16052200](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-22-teeth-for-belt-width-6mm-sku-16052200/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 20 teeth for belt width 6mm SKU: 16052000](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-20-teeth-for-belt-width-6mm-sku-16052000/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 19 teeth for belt width 6mm SKU: 16051900](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-19-teeth-for-belt-width-6mm-sku-16051900/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 18 teeth for belt width 6mm SKU: 16051800](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-18-teeth-for-belt-width-6mm-sku-16051800/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 17 teeth for belt width 6mm SKU: 16051700](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-17-teeth-for-belt-width-6mm-sku-16051700/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 16 teeth for belt width 6mm SKU: 16051600](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-16-teeth-for-belt-width-6mm-sku-16051600/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 15 teeth for belt width 6mm SKU: 16051500](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-15-teeth-for-belt-width-6mm-sku-16051500/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 14 teeth for belt width 6mm SKU: 16051400](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-14-teeth-for-belt-width-6mm-sku-16051400/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 13 teeth for belt width 6mm SKU: 16051300](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-13-teeth-for-belt-width-6mm-sku-16051300/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material polyacetal resin 12 teeth for belt width 6mm SKU: 16051200](https://maedler.in/product/timing-belt-pulley-t2-5-material-polyacetal-resin-12-teeth-for-belt-width-6mm-sku-16051200/): Material: Polyacetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of polyacetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T2.5 material aluminium 96 teeth for belt width 10 mm 20 T2,5/96-0 SKU: 16039600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-96-teeth-for-belt-width-10-mm-20-t25-96-0-sku-16039600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 84 teeth for belt width 10 mm 20 T2,5/84-0 SKU: 16038400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-84-teeth-for-belt-width-10-mm-20-t25-84-0-sku-16038400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 72 teeth for belt width 10 mm 20 T2,5/72-0 SKU: 16037200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-72-teeth-for-belt-width-10-mm-20-t25-72-0-sku-16037200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 60 teeth for belt width 10mm 20 T2.5/60-0 SKU: 16036000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-60-teeth-for-belt-width-10mm-20-t2-5-60-0-sku-16036000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 48 teeth for belt width 10mm 20 T2.5/48-0 SKU: 16034800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-48-teeth-for-belt-width-10mm-20-t2-5-48-0-sku-16034800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 44 teeth for belt width 10mm 20 T2.5/44-0 SKU: 16034400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-44-teeth-for-belt-width-10mm-20-t2-5-44-0-sku-16034400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 40 teeth for belt width 10mm 20 T2.5/40-2 SKU: 16034000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-40-teeth-for-belt-width-10mm-20-t2-5-40-2-sku-16034000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 36 teeth for belt width 10mm 20 T2.5/36-2 SKU: 16033600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-36-teeth-for-belt-width-10mm-20-t2-5-36-2-sku-16033600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 32 teeth for belt width 10mm 20 T2.5/32-2 SKU: 16033200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-32-teeth-for-belt-width-10mm-20-t2-5-32-2-sku-16033200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 30 teeth for belt width 10mm 20 T2.5/30-2 SKU: 16033000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-30-teeth-for-belt-width-10mm-20-t2-5-30-2-sku-16033000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 28 teeth for belt width 10mm 20 T2.5/28-2 SKU: 16032800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-28-teeth-for-belt-width-10mm-20-t2-5-28-2-sku-16032800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 26 teeth for belt width 10mm 20 T2.5/26-2 SKU: 16032600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-26-teeth-for-belt-width-10mm-20-t2-5-26-2-sku-16032600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 25 teeth for belt width 10mm 20 T2.5/25-2 SKU: 16032500](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-25-teeth-for-belt-width-10mm-20-t2-5-25-2-sku-16032500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 24 teeth for belt width 10mm 20 T2.5/24-2 SKU: 16032400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-24-teeth-for-belt-width-10mm-20-t2-5-24-2-sku-16032400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 22 teeth for belt width 10mm 20 T2.5/22-2 SKU: 16032200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-22-teeth-for-belt-width-10mm-20-t2-5-22-2-sku-16032200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 20 teeth for belt width 10mm 20 T2.5/20-2 SKU: 16032000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-20-teeth-for-belt-width-10mm-20-t2-5-20-2-sku-16032000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 19 teeth for belt width 10mm 20 T2.5/19-2 SKU: 16031900](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-19-teeth-for-belt-width-10mm-20-t2-5-19-2-sku-16031900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 18 teeth for belt width 10mm 20 T2.5/18-2 SKU: 16031800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-18-teeth-for-belt-width-10mm-20-t2-5-18-2-sku-16031800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 17 teeth for belt width 10 mm 20 T2,5/17-2 SKU: 16031700](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-17-teeth-for-belt-width-10-mm-20-t25-17-2-sku-16031700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 16 teeth for belt width 10mm 20 T2.5/16-2 SKU: 16031600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-16-teeth-for-belt-width-10mm-20-t2-5-16-2-sku-16031600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 15 teeth for belt width 10mm 20 T2.5/15-2 SKU: 16031500](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-15-teeth-for-belt-width-10mm-20-t2-5-15-2-sku-16031500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 14 teeth for belt width 10mm 20 T2.5/14-2 SKU: 16031400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-14-teeth-for-belt-width-10mm-20-t2-5-14-2-sku-16031400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 13 teeth for belt width 10 mm 20 T2,5/13-2 SKU: 16031300](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-13-teeth-for-belt-width-10-mm-20-t25-13-2-sku-16031300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 12 teeth for belt width 10mm 20 T2.5/12-2 SKU: 16031200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-12-teeth-for-belt-width-10mm-20-t2-5-12-2-sku-16031200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 11 teeth for belt width 10mm 20 T2.5/11-2 SKU: 16031100](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-11-teeth-for-belt-width-10mm-20-t2-5-11-2-sku-16031100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 10 teeth for belt width 10mm 20 T2.5/10-2 SKU: 16031000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-10-teeth-for-belt-width-10mm-20-t2-5-10-2-sku-16031000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 96 teeth for belt width 6 mm 16 T2,5/96-0 SKU: 16029600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-96-teeth-for-belt-width-6-mm-16-t25-96-0-sku-16029600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 84 teeth for belt width 6 mm 16 T2,5/84-0 SKU: 16028400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-84-teeth-for-belt-width-6-mm-16-t25-84-0-sku-16028400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 72 teeth for belt width 6 mm 16 T2,5/72-0 SKU: 16027200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-72-teeth-for-belt-width-6-mm-16-t25-72-0-sku-16027200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 60 teeth for belt width 6mm 16 T2.5/60-0 SKU: 16026000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-60-teeth-for-belt-width-6mm-16-t2-5-60-0-sku-16026000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 48 teeth for belt width 6mm 16 T2.5/48-0 SKU: 16024800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-48-teeth-for-belt-width-6mm-16-t2-5-48-0-sku-16024800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 44 teeth for belt width 6mm 16 T2.5/44-0 SKU: 16024400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-44-teeth-for-belt-width-6mm-16-t2-5-44-0-sku-16024400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 40 teeth for belt width 6mm 16 T2.5/40-2 SKU: 16024000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-40-teeth-for-belt-width-6mm-16-t2-5-40-2-sku-16024000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 36 teeth for belt width 6mm 16 T2.5/36-2 SKU: 16023600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-36-teeth-for-belt-width-6mm-16-t2-5-36-2-sku-16023600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 32 teeth for belt width 6mm 16 T2.5/32-2 SKU: 16023200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-32-teeth-for-belt-width-6mm-16-t2-5-32-2-sku-16023200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 30 teeth for belt width 6mm 16 T2.5/30-2 SKU: 16023000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-30-teeth-for-belt-width-6mm-16-t2-5-30-2-sku-16023000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 28 teeth for belt width 6mm 16 T2.5/28-2 SKU: 16022800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-28-teeth-for-belt-width-6mm-16-t2-5-28-2-sku-16022800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 26 teeth for belt width 6mm 16 T2.5/26-2 SKU: 16022600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-26-teeth-for-belt-width-6mm-16-t2-5-26-2-sku-16022600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 25 teeth for belt width 6mm 16 T2.5/25-2 SKU: 16022500](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-25-teeth-for-belt-width-6mm-16-t2-5-25-2-sku-16022500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 24 teeth for belt width 6mm 16 T2.5/24-2 SKU: 16022400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-24-teeth-for-belt-width-6mm-16-t2-5-24-2-sku-16022400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 22 teeth for belt width 6mm 16 T2.5/22-2 SKU: 16022200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-22-teeth-for-belt-width-6mm-16-t2-5-22-2-sku-16022200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 20 teeth for belt width 6mm 16 T2.5/20-2 SKU: 16022000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-20-teeth-for-belt-width-6mm-16-t2-5-20-2-sku-16022000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 19 teeth for belt width 6mm 16 T2.5/19-2 SKU: 16021900](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-19-teeth-for-belt-width-6mm-16-t2-5-19-2-sku-16021900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 18 teeth for belt width 6mm 16 T2.5/18-2 SKU: 16021800](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-18-teeth-for-belt-width-6mm-16-t2-5-18-2-sku-16021800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 17 teeth for belt width 6 mm 16 T2,5/17-2 SKU: 16021700](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-17-teeth-for-belt-width-6-mm-16-t25-17-2-sku-16021700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 16 teeth for belt width 6mm 16 T2.5/16-2 SKU: 16021600](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-16-teeth-for-belt-width-6mm-16-t2-5-16-2-sku-16021600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 15 teeth for belt width 6mm 16 T2.5/15-2 SKU: 16021500](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-15-teeth-for-belt-width-6mm-16-t2-5-15-2-sku-16021500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 14 teeth for belt width 6mm 16 T2.5/14-2 SKU: 16021400](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-14-teeth-for-belt-width-6mm-16-t2-5-14-2-sku-16021400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 13 teeth for belt width 6 mm 16 T2,5/13-2 SKU: 16021300](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-13-teeth-for-belt-width-6-mm-16-t25-13-2-sku-16021300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 12 teeth for belt width 6mm 16 T2.5/12-2 SKU: 16021200](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-12-teeth-for-belt-width-6mm-16-t2-5-12-2-sku-16021200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 11 teeth for belt width 6mm 16 T2.5/11-2 SKU: 16021100](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-11-teeth-for-belt-width-6mm-16-t2-5-11-2-sku-16021100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T2.5 material aluminium 10 teeth for belt width 6mm 16 T2.5/10-2 SKU: 16021000](https://maedler.in/product/timing-belt-pulley-t2-5-material-aluminium-10-teeth-for-belt-width-6mm-16-t2-5-10-2-sku-16021000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [V-belt pulley material cast iron for taper-bush 3020 profile XPB, SPB and B (17) 3 grooves nominal diameter 315mm SKU: 15533100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-315mm-sku-15533100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 3020 profile XPB, SPB and B (17) 3 grooves nominal diameter 280mm SKU: 15532800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-280mm-sku-15532800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 3020 profile XPB, SPB and B (17) 3 grooves nominal diameter 250mm SKU: 15532500](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-3020-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-250mm-sku-15532500/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 3 grooves nominal diameter 224mm SKU: 15532200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-224mm-sku-15532200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 3 grooves nominal diameter 200mm SKU: 15532000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-200mm-sku-15532000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 3 grooves nominal diameter 180mm SKU: 15531800](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-180mm-sku-15531800/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2517 profile XPB, SPB and B (17) 3 grooves nominal diameter 160mm SKU: 15531600](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2517-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-160mm-sku-15531600/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 3 grooves nominal diameter 140mm SKU: 15531400](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-140mm-sku-15531400/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 3 grooves nominal diameter 125mm SKU: 15531200](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-2012-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-125mm-sku-15531200/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 3 grooves nominal diameter 112mm SKU: 15531100](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-112mm-sku-15531100/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [V-belt pulley material cast iron for taper-bush 1610 profile XPB, SPB and B (17) 3 grooves nominal diameter 100mm SKU: 15531000](https://maedler.in/product/v-belt-pulley-material-cast-iron-for-taper-bush-1610-profile-xpb-spb-and-b-17-3-grooves-nominal-diameter-100mm-sku-15531000/): Material: Grey cast iron EN-GJL250. V-Belt Pulleys for Taper Clamping Bushes. To be used with v-belts in accordance with DIN 2215 and DIN 7753. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. Design: A = Spoked pulley. B = dished pulley. V = solid pulley. Type: See drawing above. Relation of hub to rim: bü = flush. rü = set back. v = projecting. Other diameters oder larger number of grooves can be delivered at short notice, on request. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Index plunger 717 type B pin diameter 6mm thread M10 SKU: 66671734](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-6mm-thread-m10-sku-66671734/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 5mm thread M10x1 SKU: 66671733](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-5mm-thread-m10x1-sku-66671733/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 5mm thread M8x1 SKU: 66671732](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-5mm-thread-m8x1-sku-66671732/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 5mm thread M8 SKU: 66671731](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-5mm-thread-m8-sku-66671731/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 4mm thread M8x1 SKU: 66671730](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-4mm-thread-m8x1-sku-66671730/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 4mm thread M6 SKU: 66671729](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-4mm-thread-m6-sku-66671729/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 3mm thread M6 SKU: 66671727](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-3mm-thread-m6-sku-66671727/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 10mm thread M16x1,5 SKU: 66671726](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-10mm-thread-m16x15-sku-66671726/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 8mm thread M16x1,5 SKU: 66671725](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-8mm-thread-m16x15-sku-66671725/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 8mm thread M12 SKU: 66671723](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-8mm-thread-m12-sku-66671723/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 6mm thread M12x1,5 SKU: 66671722](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-6mm-thread-m12x15-sku-66671722/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 6mm thread M10 SKU: 66671721](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-6mm-thread-m10-sku-66671721/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 5mm thread M10x1 SKU: 66671720](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-5mm-thread-m10x1-sku-66671720/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 5mm thread M8x1 SKU: 66671719](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-5mm-thread-m8x1-sku-66671719/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 5mm thread M8 SKU: 66671718](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-5mm-thread-m8-sku-66671718/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 4mm thread M8x1 SKU: 66671717](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-4mm-thread-m8x1-sku-66671717/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 4mm thread M6 SKU: 66671716](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-4mm-thread-m6-sku-66671716/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 3mm thread M6x0,75 SKU: 66671715](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-3mm-thread-m6x075-sku-66671715/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 3mm thread M6 SKU: 66671714](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-3mm-thread-m6-sku-66671714/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 10mm thread M16x1,5 SKU: 66671713](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-10mm-thread-m16x15-sku-66671713/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 8mm thread M16x1,5 SKU: 66671712](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-8mm-thread-m16x15-sku-66671712/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 8mm thread M12 SKU: 66671710](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-8mm-thread-m12-sku-66671710/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 6mm thread M12x1,5 SKU: 66671709](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-6mm-thread-m12x15-sku-66671709/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 6mm thread M10 SKU: 66671708](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-6mm-thread-m10-sku-66671708/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 5mm thread M10x1 SKU: 66671707](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-5mm-thread-m10x1-sku-66671707/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 5mm thread M8 SKU: 66671705](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-5mm-thread-m8-sku-66671705/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 4mm thread M8x1 SKU: 66671704](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-4mm-thread-m8x1-sku-66671704/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 4mm thread M6 SKU: 66671703](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-4mm-thread-m6-sku-66671703/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 3mm thread M6x0,75 SKU: 66671702](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-3mm-thread-m6x075-sku-66671702/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 3mm thread M6 SKU: 66671701](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-3mm-thread-m6-sku-66671701/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 817 shape CK bolt diameter 6mm SKU: 66671600](https://maedler.in/product/index-plunger-817-shape-ck-bolt-diameter-6mm-sku-66671600/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape CK bolt diameter 5mm SKU: 66671500](https://maedler.in/product/index-plunger-817-shape-ck-bolt-diameter-5mm-sku-66671500/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape CK bolt diameter 4mm SKU: 66671400](https://maedler.in/product/index-plunger-817-shape-ck-bolt-diameter-4mm-sku-66671400/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape C bolt diameter 10mm SKU: 66671000](https://maedler.in/product/index-plunger-817-shape-c-bolt-diameter-10mm-sku-66671000/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape C bolt diameter 8mm SKU: 66670800](https://maedler.in/product/index-plunger-817-shape-c-bolt-diameter-8mm-sku-66670800/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape C bolt diameter 6mm SKU: 66670600](https://maedler.in/product/index-plunger-817-shape-c-bolt-diameter-6mm-sku-66670600/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape C bolt diameter 5mm SKU: 66670500](https://maedler.in/product/index-plunger-817-shape-c-bolt-diameter-5mm-sku-66670500/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape C bolt diameter 4mm SKU: 66670400](https://maedler.in/product/index-plunger-817-shape-c-bolt-diameter-4mm-sku-66670400/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape BK bolt diameter 10mm SKU: 66670000](https://maedler.in/product/index-plunger-817-shape-bk-bolt-diameter-10mm-sku-66670000/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape BK bolt diameter 8mm SKU: 66669800](https://maedler.in/product/index-plunger-817-shape-bk-bolt-diameter-8mm-sku-66669800/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape BK bolt diameter 6mm SKU: 66669600](https://maedler.in/product/index-plunger-817-shape-bk-bolt-diameter-6mm-sku-66669600/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape BK bolt diameter 5mm SKU: 66669500](https://maedler.in/product/index-plunger-817-shape-bk-bolt-diameter-5mm-sku-66669500/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape BK bolt diameter 4mm SKU: 66669400](https://maedler.in/product/index-plunger-817-shape-bk-bolt-diameter-4mm-sku-66669400/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape B bolt diameter 10mm SKU: 66669000](https://maedler.in/product/index-plunger-817-shape-b-bolt-diameter-10mm-sku-66669000/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape B bolt diameter 8mm SKU: 66668700](https://maedler.in/product/index-plunger-817-shape-b-bolt-diameter-8mm-sku-66668700/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape B bolt diameter 6mm SKU: 66668600](https://maedler.in/product/index-plunger-817-shape-b-bolt-diameter-6mm-sku-66668600/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape B bolt diameter 5mm SKU: 66668500](https://maedler.in/product/index-plunger-817-shape-b-bolt-diameter-5mm-sku-66668500/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 shape B bolt diameter 4mm SKU: 66668400](https://maedler.in/product/index-plunger-817-shape-b-bolt-diameter-4mm-sku-66668400/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 417 type C with rest position with knob plunger diameter 10mm SKU: 66668210](https://maedler.in/product/index-plunger-417-type-c-with-rest-position-with-knob-plunger-diameter-10mm-sku-66668210/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type C: with rest position, with lifting ring. - [Index plunger 417 type C with rest position with knob plunger diameter 8mm SKU: 66668208](https://maedler.in/product/index-plunger-417-type-c-with-rest-position-with-knob-plunger-diameter-8mm-sku-66668208/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type C: with rest position, with lifting ring. - [Index plunger 417 type C with rest position with knob plunger diameter 6mm SKU: 66668206](https://maedler.in/product/index-plunger-417-type-c-with-rest-position-with-knob-plunger-diameter-6mm-sku-66668206/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type C: with rest position, with lifting ring. - [Index plunger 417 type C with rest position with knob plunger diameter 5mm SKU: 66668205](https://maedler.in/product/index-plunger-417-type-c-with-rest-position-with-knob-plunger-diameter-5mm-sku-66668205/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type C: with rest position, with lifting ring. - [Index plunger 417 type C with rest position with knob plunger diameter 4mm SKU: 66668204](https://maedler.in/product/index-plunger-417-type-c-with-rest-position-with-knob-plunger-diameter-4mm-sku-66668204/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type C: with rest position, with lifting ring. - [Index plunger 417 type B without rest position with knob plunger diameter 10mm SKU: 66668110](https://maedler.in/product/index-plunger-417-type-b-without-rest-position-with-knob-plunger-diameter-10mm-sku-66668110/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Index plunger 417 type B without rest position with knob plunger diameter 8mm SKU: 66668108](https://maedler.in/product/index-plunger-417-type-b-without-rest-position-with-knob-plunger-diameter-8mm-sku-66668108/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Index plunger 417 type B without rest position with knob plunger diameter 6mm SKU: 66668106](https://maedler.in/product/index-plunger-417-type-b-without-rest-position-with-knob-plunger-diameter-6mm-sku-66668106/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Index plunger 417 type B without rest position with knob plunger diameter 5mm SKU: 66668105](https://maedler.in/product/index-plunger-417-type-b-without-rest-position-with-knob-plunger-diameter-5mm-sku-66668105/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Index plunger 417 type B without rest position with knob plunger diameter 4mm SKU: 66668104](https://maedler.in/product/index-plunger-417-type-b-without-rest-position-with-knob-plunger-diameter-4mm-sku-66668104/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Index plunger 417 type A without rest position with lifting ring plunger diameter 10mm SKU: 66668010](https://maedler.in/product/index-plunger-417-type-a-without-rest-position-with-lifting-ring-plunger-diameter-10mm-sku-66668010/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Index plunger 417 type A without rest position with lifting ring plunger diameter 8mm SKU: 66668008](https://maedler.in/product/index-plunger-417-type-a-without-rest-position-with-lifting-ring-plunger-diameter-8mm-sku-66668008/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Index plunger 417 type A without rest position with lifting ring plunger diameter 6mm SKU: 66668006](https://maedler.in/product/index-plunger-417-type-a-without-rest-position-with-lifting-ring-plunger-diameter-6mm-sku-66668006/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Index plunger 417 type A without rest position with lifting ring plunger diameter 5mm SKU: 66668005](https://maedler.in/product/index-plunger-417-type-a-without-rest-position-with-lifting-ring-plunger-diameter-5mm-sku-66668005/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Index plunger 417 type A without rest position with lifting ring plunger diameter 4mm SKU: 66668004](https://maedler.in/product/index-plunger-417-type-a-without-rest-position-with-lifting-ring-plunger-diameter-4mm-sku-66668004/): Material: Housing zinc die-cast, plastic coated black, textured finish. Plunger pin: Stainless steel 1.4305. Spring and lifting ring (type A): Stainless steel 1.4310. Knob (type B): Plastic (Polyamide PA) black, matt finish, not removable. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. Type A: without rest position, with lifting ring. Type B: without rest position, with knob. - [Cabinet U handle 426.1 length 500mm material aluminium plastic coated SKU: 66667800](https://maedler.in/product/cabinet-u-handle-426-1-length-500mm-material-aluminium-plastic-coated-sku-66667800/): Material: Aluminium plastic coated, matt finish black RAL 9005. Note: Cabinet U-Handles d1 = 20 mm are drawn from aluminium extrusions. Cabinet U-Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm. Threaded bush aluminium. - [Cabinet U handle 426.1 length 350mm material aluminium plastic coated SKU: 66667600](https://maedler.in/product/cabinet-u-handle-426-1-length-350mm-material-aluminium-plastic-coated-sku-66667600/): Material: Aluminium plastic coated, matt finish black RAL 9005. Note: Cabinet U-Handles d1 = 20 mm are drawn from aluminium extrusions. Cabinet U-Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm. Threaded bush aluminium. - [Cabinet U handle 426.1 length 250mm material aluminium plastic coated SKU: 66667400](https://maedler.in/product/cabinet-u-handle-426-1-length-250mm-material-aluminium-plastic-coated-sku-66667400/): Material: Aluminium plastic coated, matt finish black RAL 9005. Note: Cabinet U-Handles d1 = 20 mm are drawn from aluminium extrusions. Cabinet U-Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm. Threaded bush aluminium. - [Cabinet U handle 426.1 length 300mm material aluminium plastic coated SKU: 66667200](https://maedler.in/product/cabinet-u-handle-426-1-length-300mm-material-aluminium-plastic-coated-sku-66667200/): Material: Aluminium plastic coated, matt finish black RAL 9005. Note: Cabinet U-Handles d1 = 20 mm are drawn from aluminium extrusions. Cabinet U-Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm. Threaded bush aluminium. - [Cabinet U handle 426.1 length 200mm material aluminium plastic coated SKU: 66667000](https://maedler.in/product/cabinet-u-handle-426-1-length-200mm-material-aluminium-plastic-coated-sku-66667000/): Material: Aluminium plastic coated, matt finish black RAL 9005. Note: Cabinet U-Handles d1 = 20 mm are drawn from aluminium extrusions. Cabinet U-Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm. Threaded bush aluminium. - [Cabinet U handle 426 length 400mm diameter 28mm aluminium plastic coated black SKU: 66666908](https://maedler.in/product/cabinet-u-handle-426-length-400mm-diameter-28mm-aluminium-plastic-coated-black-sku-66666908/): Material: Aluminium plastic coated, matt finish black RAL 9005.Handles d1 = 20 mm are drawn from aluminium extrusions.Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm with threaded bush from aluminium. - [Cabinet U handle 426 length 350mm diameter 28mm aluminium plastic coated black SKU: 66666907](https://maedler.in/product/cabinet-u-handle-426-length-350mm-diameter-28mm-aluminium-plastic-coated-black-sku-66666907/): Material: Aluminium plastic coated, matt finish black RAL 9005.Handles d1 = 20 mm are drawn from aluminium extrusions.Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm with threaded bush from aluminium. - [Cabinet U handle 426 length 300mm diameter 28mm aluminium plastic coated black SKU: 66666906](https://maedler.in/product/cabinet-u-handle-426-length-300mm-diameter-28mm-aluminium-plastic-coated-black-sku-66666906/): Material: Aluminium plastic coated, matt finish black RAL 9005.Handles d1 = 20 mm are drawn from aluminium extrusions.Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm with threaded bush from aluminium. - [Cabinet U handle 426 length 250mm diameter 28mm aluminium plastic coated black SKU: 66666905](https://maedler.in/product/cabinet-u-handle-426-length-250mm-diameter-28mm-aluminium-plastic-coated-black-sku-66666905/): Material: Aluminium plastic coated, matt finish black RAL 9005.Handles d1 = 20 mm are drawn from aluminium extrusions.Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm with threaded bush from aluminium. - [Cabinet U handle 426 length 350mm diameter 20mm aluminium plastic coated black SKU: 66666904](https://maedler.in/product/cabinet-u-handle-426-length-350mm-diameter-20mm-aluminium-plastic-coated-black-sku-66666904/): Material: Aluminium plastic coated, matt finish black RAL 9005.Handles d1 = 20 mm are drawn from aluminium extrusions.Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm with threaded bush from aluminium. - [Cabinet U handle 426 length 300mm diameter 20mm aluminium plastic coated black SKU: 66666903](https://maedler.in/product/cabinet-u-handle-426-length-300mm-diameter-20mm-aluminium-plastic-coated-black-sku-66666903/): Material: Aluminium plastic coated, matt finish black RAL 9005.Handles d1 = 20 mm are drawn from aluminium extrusions.Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm with threaded bush from aluminium. - [Cabinet U handle 426 length 250mm diameter 20mm aluminium plastic coated black SKU: 66666902](https://maedler.in/product/cabinet-u-handle-426-length-250mm-diameter-20mm-aluminium-plastic-coated-black-sku-66666902/): Material: Aluminium plastic coated, matt finish black RAL 9005.Handles d1 = 20 mm are drawn from aluminium extrusions.Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm with threaded bush from aluminium. - [Cabinet U handle 426 length 200mm diameter 20mm aluminium plastic coated black SKU: 66666901](https://maedler.in/product/cabinet-u-handle-426-length-200mm-diameter-20mm-aluminium-plastic-coated-black-sku-66666901/): Material: Aluminium plastic coated, matt finish black RAL 9005.Handles d1 = 20 mm are drawn from aluminium extrusions.Handles d1 = 28 mm are produced from aluminium tube with a wall thickness of 4 mm with threaded bush from aluminium. - [Cabinet U handle 565.1 length 196mm material aluminium SKU: 66666600](https://maedler.in/product/cabinet-u-handle-565-1-length-196mm-material-aluminium-sku-66666600/): Material: Aluminium plastic coated, matt finish, black RAL 9011. Cabinet U-handles 565.1 are a further development of the cabinet U-handles 565. They allow the handles to be mounted from the operating side. Drawn from profiled aluminium extrusions, their special features are rigidity and smooth surface. Good design and ergonomical shape were essential factors when choosing this profile. - [Cabinet U handle 565.1 length 164mm material aluminium SKU: 66666400](https://maedler.in/product/cabinet-u-handle-565-1-length-164mm-material-aluminium-sku-66666400/): Material: Aluminium plastic coated, matt finish, black RAL 9011. Cabinet U-handles 565.1 are a further development of the cabinet U-handles 565. They allow the handles to be mounted from the operating side. Drawn from profiled aluminium extrusions, their special features are rigidity and smooth surface. Good design and ergonomical shape were essential factors when choosing this profile. - [Cabinet U handle 565.1 length 132mm material aluminium SKU: 66666200](https://maedler.in/product/cabinet-u-handle-565-1-length-132mm-material-aluminium-sku-66666200/): Material: Aluminium plastic coated, matt finish, black RAL 9011. Cabinet U-handles 565.1 are a further development of the cabinet U-handles 565. They allow the handles to be mounted from the operating side. Drawn from profiled aluminium extrusions, their special features are rigidity and smooth surface. Good design and ergonomical shape were essential factors when choosing this profile. - [Cabinet U handle 565.1 length 116mm material aluminium SKU: 66666000](https://maedler.in/product/cabinet-u-handle-565-1-length-116mm-material-aluminium-sku-66666000/): Material: Aluminium plastic coated, matt finish, black RAL 9011. Cabinet U-handles 565.1 are a further development of the cabinet U-handles 565. They allow the handles to be mounted from the operating side. Drawn from profiled aluminium extrusions, their special features are rigidity and smooth surface. Good design and ergonomical shape were essential factors when choosing this profile. - [Cabinet U handle 565 length 400mm material aluminium SKU: 66665800](https://maedler.in/product/cabinet-u-handle-565-length-400mm-material-aluminium-sku-66665800/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabinet U handle 565 length 300mm material aluminium SKU: 66665600](https://maedler.in/product/cabinet-u-handle-565-length-300mm-material-aluminium-sku-66665600/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabinet U handle 565 length 192mm material aluminium SKU: 66665200](https://maedler.in/product/cabinet-u-handle-565-length-192mm-material-aluminium-sku-66665200/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabinet U handle 565 length 160mm material aluminium SKU: 66664900](https://maedler.in/product/cabinet-u-handle-565-length-160mm-material-aluminium-sku-66664900/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabinet U handle 565 length 128mm material aluminium SKU: 66664700](https://maedler.in/product/cabinet-u-handle-565-length-128mm-material-aluminium-sku-66664700/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabinet U handle 565 length 112mm material aluminium SKU: 66664500](https://maedler.in/product/cabinet-u-handle-565-length-112mm-material-aluminium-sku-66664500/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabinet U handle 565 length 160mm material aluminium SKU: 66664000](https://maedler.in/product/cabinet-u-handle-565-length-160mm-material-aluminium-sku-66664000/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabinet U handle 565 length 128mm material aluminium SKU: 66663700](https://maedler.in/product/cabinet-u-handle-565-length-128mm-material-aluminium-sku-66663700/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabinet U handle 565 length 112mm material aluminium SKU: 66663500](https://maedler.in/product/cabinet-u-handle-565-length-112mm-material-aluminium-sku-66663500/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabinet U handle 565 length 100mm material aluminium SKU: 66663300](https://maedler.in/product/cabinet-u-handle-565-length-100mm-material-aluminium-sku-66663300/): Material: Aluminium, plastic coated, matt finish black RAL 9011. Note: Cabinet U-Handles 565 are drawn from aluminium, have a smooth surface and are of a rigid design. - [Cabint U handle 425 CR length 235mm material steel chrome plated SKU: 66662300](https://maedler.in/product/cabint-u-handle-425-cr-length-235mm-material-steel-chrome-plated-sku-66662300/): Material: Steel, chrome plated. Washers zinc die-cast, nickel-plated.Supplied with two washers. These discs guarantee perfectpositioning even with large bores in the cabinet. The washers are loosely packed. - [Cabint U handle 425 CR length 200mm material steel chrome plated SKU: 66662100](https://maedler.in/product/cabint-u-handle-425-cr-length-200mm-material-steel-chrome-plated-sku-66662100/): Material: Steel, chrome plated. Washers zinc die-cast, nickel-plated.Supplied with two washers. These discs guarantee perfectpositioning even with large bores in the cabinet. The washers are loosely packed. - [Cabint U handle 425 CR length 180mm material steel chrome plated SKU: 66661900](https://maedler.in/product/cabint-u-handle-425-cr-length-180mm-material-steel-chrome-plated-sku-66661900/): Material: Steel, chrome plated. Washers zinc die-cast, nickel-plated.Supplied with two washers. These discs guarantee perfectpositioning even with large bores in the cabinet. The washers are loosely packed. - [Cabint U handle 425 CR length 120mm material steel chrome plated SKU: 66661600](https://maedler.in/product/cabint-u-handle-425-cr-length-120mm-material-steel-chrome-plated-sku-66661600/): Material: Steel, chrome plated. Washers zinc die-cast, nickel-plated.Supplied with two washers. These discs guarantee perfectpositioning even with large bores in the cabinet. The washers are loosely packed. - [Cabint U handle 425 CR length 100mm material steel chrome plated SKU: 66661400](https://maedler.in/product/cabint-u-handle-425-cr-length-100mm-material-steel-chrome-plated-sku-66661400/): Material: Steel, chrome plated. Washers zinc die-cast, nickel-plated.Supplied with two washers. These discs guarantee perfectpositioning even with large bores in the cabinet. The washers are loosely packed. - [Cabint U handle 425 CR length 88mm material steel chrome plated SKU: 66661200](https://maedler.in/product/cabint-u-handle-425-cr-length-88mm-material-steel-chrome-plated-sku-66661200/): Material: Steel, chrome plated. Washers zinc die-cast, nickel-plated.Supplied with two washers. These discs guarantee perfectpositioning even with large bores in the cabinet. The washers are loosely packed. - [Cabinet U handle 525 length 179mm material plastic schwarz SKU: 66660300](https://maedler.in/product/cabinet-u-handle-525-length-179mm-material-plastic-schwarz-sku-66660300/): Material: Plastic Duroplast PF31, black glossy finish, flash mark thoroughly polished. A special feature is that the flash mark on this handle is not visible nor can it be felt. The large tube diameter and the brass threaded bush lead to an immense rigidity. Temperature resistant up to 110°C. - [Cabinet U handle 725 length 179mm material PA HT SKU: 66660207](https://maedler.in/product/cabinet-u-handle-725-length-179mm-material-pa-ht-sku-66660207/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 725 length 117mm material PA HT SKU: 66660203](https://maedler.in/product/cabinet-u-handle-725-length-117mm-material-pa-ht-sku-66660203/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Cabinet U handle 725 length 117mm material PA HT SKU: 66660202](https://maedler.in/product/cabinet-u-handle-725-length-117mm-material-pa-ht-sku-66660202/): Material Version Plastic PP: Thermoplast Polypropylene, glass-fibre reinforced, black, matt. Cost efficient. Temperature resistant up to 100ºC. Material Version Plastic PA HT: Thermoplast Polyamide, glass-fibre reinforced, black, matt. Stronger than Version PP. Temperature resistant up to 200º C. - [Timing belt pulley T5 material aluminium 13 teeth for belt width 10 mm 21 T5/13-2 SKU: 16221300](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-13-teeth-for-belt-width-10-mm-21-t5-13-2-sku-16221300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 12 teeth for belt width 10mm 21 T5/12-2 SKU: 16221200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-12-teeth-for-belt-width-10mm-21-t5-12-2-sku-16221200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 11 teeth for belt width 10 mm 21 T5/11-2 SKU: 16221100](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-11-teeth-for-belt-width-10-mm-21-t5-11-2-sku-16221100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 10 teeth for belt width 10mm 21 T5/10-2 SKU: 16221000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-10-teeth-for-belt-width-10mm-21-t5-10-2-sku-16221000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 72 teeth for belt width 32 mm 46 T5/72-0 SKU: 16217200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-72-teeth-for-belt-width-32-mm-46-t5-72-0-sku-16217200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 60 teeth for belt width 32mm 46 T5/60-0 SKU: 16216000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-60-teeth-for-belt-width-32mm-46-t5-60-0-sku-16216000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 48 teeth for belt width 32mm 46 T5/48-0 SKU: 16214800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-48-teeth-for-belt-width-32mm-46-t5-48-0-sku-16214800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 44 teeth for belt width 32mm 46 T5/44-0 SKU: 16214400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-44-teeth-for-belt-width-32mm-46-t5-44-0-sku-16214400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 42 teeth for belt width 32mm 46 T5/42-2 SKU: 16214200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-42-teeth-for-belt-width-32mm-46-t5-42-2-sku-16214200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 40 teeth for belt width 32mm 46 T5/40-2 SKU: 16214000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-40-teeth-for-belt-width-32mm-46-t5-40-2-sku-16214000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 36 teeth for belt width 32mm 46 T5/36-2 SKU: 16213600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-36-teeth-for-belt-width-32mm-46-t5-36-2-sku-16213600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 32 teeth for belt width 32mm 46 T5/32-2 SKU: 16213200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-32-teeth-for-belt-width-32mm-46-t5-32-2-sku-16213200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 30 teeth for belt width 32mm 46 T5/30-2 SKU: 16213000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-30-teeth-for-belt-width-32mm-46-t5-30-2-sku-16213000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 28 teeth for belt width 32mm 46 T5/28-2 SKU: 16212800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-28-teeth-for-belt-width-32mm-46-t5-28-2-sku-16212800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 27 teeth for belt width 32mm 46 T5/27-2 SKU: 16212700](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-27-teeth-for-belt-width-32mm-46-t5-27-2-sku-16212700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 26 teeth for belt width 32mm 46 T5/26-2 SKU: 16212600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-26-teeth-for-belt-width-32mm-46-t5-26-2-sku-16212600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 25 teeth for belt width 32mm 46 T5/25-2 SKU: 16212500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-25-teeth-for-belt-width-32mm-46-t5-25-2-sku-16212500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 24 teeth for belt width 32mm 46 T5/24-2 SKU: 16212400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-24-teeth-for-belt-width-32mm-46-t5-24-2-sku-16212400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 22 teeth for belt width 32mm 46 T5/22-2 SKU: 16212200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-22-teeth-for-belt-width-32mm-46-t5-22-2-sku-16212200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 20 teeth for belt width 32mm 46 T5/20-2 SKU: 16212000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-20-teeth-for-belt-width-32mm-46-t5-20-2-sku-16212000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 19 teeth for belt width 32mm 46 T5/19-2 SKU: 16211900](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-19-teeth-for-belt-width-32mm-46-t5-19-2-sku-16211900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 18 teeth for belt width 32mm 46 T5/18-2 SKU: 16211800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-18-teeth-for-belt-width-32mm-46-t5-18-2-sku-16211800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 16 teeth for belt width 32mm 46 T5/16-2 SKU: 16211600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-16-teeth-for-belt-width-32mm-46-t5-16-2-sku-16211600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 15 teeth for belt width 32mm 46 T5/15-2 SKU: 16211500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-15-teeth-for-belt-width-32mm-46-t5-15-2-sku-16211500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 14 teeth for belt width 32mm 46 T5/14-2 SKU: 16211400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-14-teeth-for-belt-width-32mm-46-t5-14-2-sku-16211400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 13 teeth for belt width 32 mm 46 T5/13-2 SKU: 16211300](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-13-teeth-for-belt-width-32-mm-46-t5-13-2-sku-16211300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 12 teeth for belt width 32mm 46 T5/12-2 SKU: 16211200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-12-teeth-for-belt-width-32mm-46-t5-12-2-sku-16211200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 10 teeth for belt width 32mm 46 T5/10-2 SKU: 16211000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-10-teeth-for-belt-width-32mm-46-t5-10-2-sku-16211000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [timing bar T2.5 100 teeth length 160mm material aluminium SKU: 16099900](https://maedler.in/product/timing-bar-t2-5-100-teeth-length-160mm-material-aluminium-sku-16099900/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 96 teeth length 140mm material aluminium SKU: 16099600](https://maedler.in/product/timing-bar-t2-5-96-teeth-length-140mm-material-aluminium-sku-16099600/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 90 teeth length 160mm material aluminium SKU: 16099000](https://maedler.in/product/timing-bar-t2-5-90-teeth-length-160mm-material-aluminium-sku-16099000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 84 teeth length 160mm material aluminium SKU: 16098400](https://maedler.in/product/timing-bar-t2-5-84-teeth-length-160mm-material-aluminium-sku-16098400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 80 teeth length 160mm material aluminium SKU: 16098000](https://maedler.in/product/timing-bar-t2-5-80-teeth-length-160mm-material-aluminium-sku-16098000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 72 teeth length 160mm material aluminium SKU: 16097200](https://maedler.in/product/timing-bar-t2-5-72-teeth-length-160mm-material-aluminium-sku-16097200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 70 teeth length 160mm material aluminium SKU: 16097000](https://maedler.in/product/timing-bar-t2-5-70-teeth-length-160mm-material-aluminium-sku-16097000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 65 teeth length 160mm material aluminium SKU: 16096500](https://maedler.in/product/timing-bar-t2-5-65-teeth-length-160mm-material-aluminium-sku-16096500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 60 teeth length 160mm material aluminium SKU: 16096000](https://maedler.in/product/timing-bar-t2-5-60-teeth-length-160mm-material-aluminium-sku-16096000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 50 teeth length 160mm material aluminium SKU: 16095000](https://maedler.in/product/timing-bar-t2-5-50-teeth-length-160mm-material-aluminium-sku-16095000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 48 teeth length 140mm material aluminium SKU: 16094800](https://maedler.in/product/timing-bar-t2-5-48-teeth-length-140mm-material-aluminium-sku-16094800/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 45 teeth length 140mm material aluminium SKU: 16094500](https://maedler.in/product/timing-bar-t2-5-45-teeth-length-140mm-material-aluminium-sku-16094500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 44 teeth length 140mm material aluminium SKU: 16094400](https://maedler.in/product/timing-bar-t2-5-44-teeth-length-140mm-material-aluminium-sku-16094400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 42 teeth length 140mm material aluminium SKU: 16094200](https://maedler.in/product/timing-bar-t2-5-42-teeth-length-140mm-material-aluminium-sku-16094200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 40 teeth length 140mm material aluminium SKU: 16094000](https://maedler.in/product/timing-bar-t2-5-40-teeth-length-140mm-material-aluminium-sku-16094000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 38 teeth length 140mm material aluminium SKU: 16093800](https://maedler.in/product/timing-bar-t2-5-38-teeth-length-140mm-material-aluminium-sku-16093800/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 36 teeth length 140mm material aluminium SKU: 16093600](https://maedler.in/product/timing-bar-t2-5-36-teeth-length-140mm-material-aluminium-sku-16093600/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 35 teeth length 140mm material aluminium SKU: 16093500](https://maedler.in/product/timing-bar-t2-5-35-teeth-length-140mm-material-aluminium-sku-16093500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 34 teeth length 140mm material aluminium SKU: 16093400](https://maedler.in/product/timing-bar-t2-5-34-teeth-length-140mm-material-aluminium-sku-16093400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 32 teeth length 140mm material aluminium SKU: 16093200](https://maedler.in/product/timing-bar-t2-5-32-teeth-length-140mm-material-aluminium-sku-16093200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 30 teeth length 140mm material aluminium SKU: 16093000](https://maedler.in/product/timing-bar-t2-5-30-teeth-length-140mm-material-aluminium-sku-16093000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 29 teeth length 140mm material aluminium SKU: 16092900](https://maedler.in/product/timing-bar-t2-5-29-teeth-length-140mm-material-aluminium-sku-16092900/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 28 teeth length 140mm material aluminium SKU: 16092800](https://maedler.in/product/timing-bar-t2-5-28-teeth-length-140mm-material-aluminium-sku-16092800/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 27 teeth length 140mm material aluminium SKU: 16092700](https://maedler.in/product/timing-bar-t2-5-27-teeth-length-140mm-material-aluminium-sku-16092700/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 26 teeth length 140mm material aluminium SKU: 16092600](https://maedler.in/product/timing-bar-t2-5-26-teeth-length-140mm-material-aluminium-sku-16092600/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 25 teeth length 140mm material aluminium SKU: 16092500](https://maedler.in/product/timing-bar-t2-5-25-teeth-length-140mm-material-aluminium-sku-16092500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 24 teeth length 140mm material aluminium SKU: 16092400](https://maedler.in/product/timing-bar-t2-5-24-teeth-length-140mm-material-aluminium-sku-16092400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 23 teeth length 140mm material aluminium SKU: 16092300](https://maedler.in/product/timing-bar-t2-5-23-teeth-length-140mm-material-aluminium-sku-16092300/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 22 teeth length 140mm material aluminium SKU: 16092200](https://maedler.in/product/timing-bar-t2-5-22-teeth-length-140mm-material-aluminium-sku-16092200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 21 teeth length 120mm material aluminium SKU: 16092100](https://maedler.in/product/timing-bar-t2-5-21-teeth-length-120mm-material-aluminium-sku-16092100/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 20 teeth length 120mm material aluminium SKU: 16092000](https://maedler.in/product/timing-bar-t2-5-20-teeth-length-120mm-material-aluminium-sku-16092000/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 19 teeth length 120mm material aluminium SKU: 16091900](https://maedler.in/product/timing-bar-t2-5-19-teeth-length-120mm-material-aluminium-sku-16091900/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 18 teeth length 75mm material aluminium SKU: 16091800](https://maedler.in/product/timing-bar-t2-5-18-teeth-length-75mm-material-aluminium-sku-16091800/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 17 teeth length 75mm material aluminium SKU: 16091700](https://maedler.in/product/timing-bar-t2-5-17-teeth-length-75mm-material-aluminium-sku-16091700/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 16 teeth length 75mm material aluminium SKU: 16091600](https://maedler.in/product/timing-bar-t2-5-16-teeth-length-75mm-material-aluminium-sku-16091600/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 15 teeth length 75mm material aluminium SKU: 16091500](https://maedler.in/product/timing-bar-t2-5-15-teeth-length-75mm-material-aluminium-sku-16091500/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 14 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091400](https://maedler.in/product/timing-bar-t2-5-14-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091400/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 13 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091300](https://maedler.in/product/timing-bar-t2-5-13-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091300/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 12 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091200](https://maedler.in/product/timing-bar-t2-5-12-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091200/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 11 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091100](https://maedler.in/product/timing-bar-t2-5-11-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091100/): Material: Aluminium similar EN AW2017A. - [timing bar T2.5 10 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 16091000](https://maedler.in/product/timing-bar-t2-5-10-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-16091000/): Material: Aluminium similar EN AW2017A. - [Fixing plate for timing belts material aluminium T2.5 belt width 10mm SKU: 16079900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t2-5-belt-width-10mm-sku-16079900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T2.5 width 10mm Lw 950mm 380 teeth 10 T2,5/950 SKU: 16072300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-950mm-380-teeth-10-t25-950-sku-16072300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 915mm 366 teeth 10 T2,5/915 SKU: 16072200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-915mm-366-teeth-10-t25-915-sku-16072200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 780mm 312 teeth 10 T2.5/780 SKU: 16072100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-780mm-312-teeth-10-t2-5-780-sku-16072100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 650mm 260 teeth 10 T2.5/650 SKU: 16072000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-650mm-260-teeth-10-t2-5-650-sku-16072000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 620mm 248 teeth 10 T2,5/620 SKU: 16071900](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-620mm-248-teeth-10-t25-620-sku-16071900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 600mm 240 teeth 10 T2.5/600 SKU: 16071800](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-600mm-240-teeth-10-t2-5-600-sku-16071800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 500mm 200 teeth 10 T2.5/500 SKU: 16071700](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-500mm-200-teeth-10-t2-5-500-sku-16071700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 480mm 192 teeth 10 T2.5/480 SKU: 16071500](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-480mm-192-teeth-10-t2-5-480-sku-16071500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 420mm 168 teeth 10 T2.5/420 SKU: 16071400](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-420mm-168-teeth-10-t2-5-420-sku-16071400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 380mm 152 teeth 10 T2.5/380 SKU: 16071300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-380mm-152-teeth-10-t2-5-380-sku-16071300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 330mm 132 teeth 10 T2.5/330 SKU: 16071200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-330mm-132-teeth-10-t2-5-330-sku-16071200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 317.5mm 127 teeth 10 T2.5/317.5 SKU: 16071100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-317-5mm-127-teeth-10-t2-5-317-5-sku-16071100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 305mm 122 teeth 10 T2.5/305 SKU: 16071000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-305mm-122-teeth-10-t2-5-305-sku-16071000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 285mm 114 teeth 10 T2.5/285 SKU: 16070900](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-285mm-114-teeth-10-t2-5-285-sku-16070900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 265mm 106 teeth 10 T2.5/265 SKU: 16070800](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-265mm-106-teeth-10-t2-5-265-sku-16070800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 245mm 98 teeth 10 T2.5/245 SKU: 16070700](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-245mm-98-teeth-10-t2-5-245-sku-16070700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 230mm 92 teeth 10 T2.5/230 SKU: 16070600](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-230mm-92-teeth-10-t2-5-230-sku-16070600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 200mm 80 teeth 10 T2.5/200 SKU: 16070500](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-200mm-80-teeth-10-t2-5-200-sku-16070500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 177.5mm 71 teeth 10 T2.5/177,5 SKU: 16070400](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-177-5mm-71-teeth-10-t2-5-1775-sku-16070400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 160mm 64 teeth 10 T2.5/160 SKU: 16070300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-160mm-64-teeth-10-t2-5-160-sku-16070300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 145mm 58 teeth 10 T2.5/145 SKU: 16070200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-145mm-58-teeth-10-t2-5-145-sku-16070200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm Lw 120mm 48 teeth 10 T2.5/120 SKU: 16070100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-lw-120mm-48-teeth-10-t2-5-120-sku-16070100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 10mm 10 T2.5 open length SKU: 16070000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-10mm-10-t2-5-open-length-sku-16070000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T2.5 belt width 6mm SKU: 16069900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t2-5-belt-width-6mm-sku-16069900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T2.5 width 6mm Lw 950 380 teeth 6 T2,5/950 SKU: 16062300](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-950-380-teeth-6-t25-950-sku-16062300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 915 366 teeth 6 T2,5/915 SKU: 16062200](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-915-366-teeth-6-t25-915-sku-16062200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 780 312 teeth 6 T2.5/780 SKU: 16062100](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-780-312-teeth-6-t2-5-780-sku-16062100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 650 260 teeth 6 T2.5/650 SKU: 16062000](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-650-260-teeth-6-t2-5-650-sku-16062000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 620 248 teeth 6 T2,5/620 SKU: 16061900](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-620-248-teeth-6-t25-620-sku-16061900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt T2.5 width 6mm Lw 600 240 teeth 6 T2.5/600 SKU: 16061800](https://maedler.in/product/polyurethane-timing-belt-t2-5-width-6mm-lw-600-240-teeth-6-t2-5-600-sku-16061800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Index plunger 717 type C pin diameter 8mm thread M12x1,5 stainless steel SKU: 66671863](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-8mm-thread-m12x15-stainless-steel-sku-66671863/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 8mm thread M12 stainless steel SKU: 66671862](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-8mm-thread-m12-stainless-steel-sku-66671862/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 6mm thread M12x1,5 stainless steel SKU: 66671861](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-6mm-thread-m12x15-stainless-steel-sku-66671861/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 6mm thread M10 stainless steel SKU: 66671860](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-6mm-thread-m10-stainless-steel-sku-66671860/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 5mm thread M10x1 stainless steel SKU: 66671859](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-5mm-thread-m10x1-stainless-steel-sku-66671859/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 5mm thread M8x1 stainless steel SKU: 66671858](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-5mm-thread-m8x1-stainless-steel-sku-66671858/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 5mm thread M8 stainless steel SKU: 66671857](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-5mm-thread-m8-stainless-steel-sku-66671857/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 4mm thread M8x1 stainless steel SKU: 66671856](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-4mm-thread-m8x1-stainless-steel-sku-66671856/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 4mm thread M6 stainless steel SKU: 66671855](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-4mm-thread-m6-stainless-steel-sku-66671855/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 3mm thread M6x0,75 stainless steel SKU: 66671854](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-3mm-thread-m6x075-stainless-steel-sku-66671854/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 3mm thread M6 stainless steel SKU: 66671853](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-3mm-thread-m6-stainless-steel-sku-66671853/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type BK pin diameter 10mm thread M16x1,5 stainless steel SKU: 66671852](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-10mm-thread-m16x15-stainless-steel-sku-66671852/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 8mm thread M16x1,5 stainless steel SKU: 66671851](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-8mm-thread-m16x15-stainless-steel-sku-66671851/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 8mm thread M12x1,5 stainless steel SKU: 66671850](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-8mm-thread-m12x15-stainless-steel-sku-66671850/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 8mm thread M12 stainless steel SKU: 66671849](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-8mm-thread-m12-stainless-steel-sku-66671849/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 6mm thread M12x1,5 stainless steel SKU: 66671848](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-6mm-thread-m12x15-stainless-steel-sku-66671848/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 6mm thread M10 stainless steel SKU: 66671847](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-6mm-thread-m10-stainless-steel-sku-66671847/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 5mm thread M10x1 stainless steel SKU: 66671846](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-5mm-thread-m10x1-stainless-steel-sku-66671846/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 5mm thread M8 stainless steel SKU: 66671844](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-5mm-thread-m8-stainless-steel-sku-66671844/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 4mm thread M8x1 stainless steel SKU: 66671843](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-4mm-thread-m8x1-stainless-steel-sku-66671843/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 4mm thread M6 stainless steel SKU: 66671842](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-4mm-thread-m6-stainless-steel-sku-66671842/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 3mm thread M6x0,75 stainless steel SKU: 66671841](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-3mm-thread-m6x075-stainless-steel-sku-66671841/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 3mm thread M6 stainless steel SKU: 66671840](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-3mm-thread-m6-stainless-steel-sku-66671840/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 10mm thread M16x1,5 stainless steel SKU: 66671839](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-10mm-thread-m16x15-stainless-steel-sku-66671839/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 8mm thread M16x1,5 stainless steel SKU: 66671838](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-8mm-thread-m16x15-stainless-steel-sku-66671838/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 8mm thread M12x1,5 stainless steel SKU: 66671837](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-8mm-thread-m12x15-stainless-steel-sku-66671837/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 8mm thread M12 stainless steel SKU: 66671836](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-8mm-thread-m12-stainless-steel-sku-66671836/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 6mm thread M12x1,5 stainless steel SKU: 66671835](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-6mm-thread-m12x15-stainless-steel-sku-66671835/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 6mm thread M10 stainless steel SKU: 66671834](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-6mm-thread-m10-stainless-steel-sku-66671834/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 5mm thread M10x1 stainless steel SKU: 66671833](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-5mm-thread-m10x1-stainless-steel-sku-66671833/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 5mm thread M8x1 stainless steel SKU: 66671832](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-5mm-thread-m8x1-stainless-steel-sku-66671832/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 5mm thread M8 stainless steel SKU: 66671831](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-5mm-thread-m8-stainless-steel-sku-66671831/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 4mm thread M8x1 stainless steel SKU: 66671830](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-4mm-thread-m8x1-stainless-steel-sku-66671830/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 4mm thread M6 stainless steel SKU: 66671829](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-4mm-thread-m6-stainless-steel-sku-66671829/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 3mm thread M6 stainless steel SKU: 66671827](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-3mm-thread-m6-stainless-steel-sku-66671827/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 10mm thread M16x1,5 stainless steel SKU: 66671826](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-10mm-thread-m16x15-stainless-steel-sku-66671826/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 8mm thread M16x1,5 stainless steel SKU: 66671825](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-8mm-thread-m16x15-stainless-steel-sku-66671825/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 8mm thread M12 stainless steel SKU: 66671823](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-8mm-thread-m12-stainless-steel-sku-66671823/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 6mm thread M12x1,5 stainless steel SKU: 66671822](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-6mm-thread-m12x15-stainless-steel-sku-66671822/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 6mm thread M10 stainless steel SKU: 66671821](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-6mm-thread-m10-stainless-steel-sku-66671821/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 5mm thread M10x1 stainless steel SKU: 66671820](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-5mm-thread-m10x1-stainless-steel-sku-66671820/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 5mm thread M8x1 stainless steel SKU: 66671819](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-5mm-thread-m8x1-stainless-steel-sku-66671819/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 5mm thread M8 stainless steel SKU: 66671818](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-5mm-thread-m8-stainless-steel-sku-66671818/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 4mm thread M8x1 stainless steel SKU: 66671817](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-4mm-thread-m8x1-stainless-steel-sku-66671817/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 4mm thread M6 stainless steel SKU: 66671816](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-4mm-thread-m6-stainless-steel-sku-66671816/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 3mm thread M6x0,75 stainless steel SKU: 66671815](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-3mm-thread-m6x075-stainless-steel-sku-66671815/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type AK pin diameter 3mm thread M6 stainless steel SKU: 66671814](https://maedler.in/product/index-plunger-717-type-ak-pin-diameter-3mm-thread-m6-stainless-steel-sku-66671814/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 10mm thread M16x1,5 stainless steel SKU: 66671813](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-10mm-thread-m16x15-stainless-steel-sku-66671813/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 8mm thread M16x1,5 stainless steel SKU: 66671812](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-8mm-thread-m16x15-stainless-steel-sku-66671812/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 8mm thread M12 stainless steel SKU: 66671810](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-8mm-thread-m12-stainless-steel-sku-66671810/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 6mm thread M12x1,5 stainless steel SKU: 66671809](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-6mm-thread-m12x15-stainless-steel-sku-66671809/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 6mm thread M10 stainless steel SKU: 66671808](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-6mm-thread-m10-stainless-steel-sku-66671808/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 5mm thread M10x1 stainless steel SKU: 66671807](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-5mm-thread-m10x1-stainless-steel-sku-66671807/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 5mm thread M8 stainless steel SKU: 66671805](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-5mm-thread-m8-stainless-steel-sku-66671805/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 4mm thread M8x1 stainless steel SKU: 66671804](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-4mm-thread-m8x1-stainless-steel-sku-66671804/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 4mm thread M6 stainless steel SKU: 66671803](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-4mm-thread-m6-stainless-steel-sku-66671803/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 3mm thread M6x0.75 stainless steel SKU: 66671802](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-3mm-thread-m6x0-75-stainless-steel-sku-66671802/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type A pin diameter 3mm thread M6 stainless steel SKU: 66671801](https://maedler.in/product/index-plunger-717-type-a-pin-diameter-3mm-thread-m6-stainless-steel-sku-66671801/): Material: Body stainless steel 1.4305 (AISI 303). Both versions: Plunger pin stainless steel 1.4305 (AISI 303). Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 817 type CK pin diameter 8mm SKU: 66671800](https://maedler.in/product/index-plunger-817-type-ck-pin-diameter-8mm-sku-66671800/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 717 type CK pin diameter 10mm thread M16x1,5 SKU: 66671778](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-10mm-thread-m16x15-sku-66671778/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 8mm thread M16x1,5 SKU: 66671777](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-8mm-thread-m16x15-sku-66671777/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 8mm thread M12x1,5 SKU: 66671776](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-8mm-thread-m12x15-sku-66671776/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 8mm thread M12 SKU: 66671775](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-8mm-thread-m12-sku-66671775/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 6mm thread M12x1,5 SKU: 66671774](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-6mm-thread-m12x15-sku-66671774/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 6mm thread M10 SKU: 66671773](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-6mm-thread-m10-sku-66671773/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 5mm thread M10x1 SKU: 66671772](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-5mm-thread-m10x1-sku-66671772/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 5mm thread M8 SKU: 66671770](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-5mm-thread-m8-sku-66671770/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 4mm thread M8x1 SKU: 66671769](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-4mm-thread-m8x1-sku-66671769/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 4mm thread M6 SKU: 66671768](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-4mm-thread-m6-sku-66671768/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 3mm thread M6 SKU: 66671766](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-3mm-thread-m6-sku-66671766/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 10mm thread M16x1,5 SKU: 66671765](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-10mm-thread-m16x15-sku-66671765/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 8mm thread M16x1,5 SKU: 66671764](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-8mm-thread-m16x15-sku-66671764/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 8mm thread M12x1,5 SKU: 66671763](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-8mm-thread-m12x15-sku-66671763/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 8mm thread M12 SKU: 66671762](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-8mm-thread-m12-sku-66671762/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 6mm thread M12x1,5 SKU: 66671761](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-6mm-thread-m12x15-sku-66671761/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 6mm thread M10 SKU: 66671760](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-6mm-thread-m10-sku-66671760/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 5mm thread M10x1 SKU: 66671759](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-5mm-thread-m10x1-sku-66671759/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 5mm thread M8x1 SKU: 66671758](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-5mm-thread-m8x1-sku-66671758/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 5mm thread M8 SKU: 66671757](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-5mm-thread-m8-sku-66671757/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 4mm thread M8x1 SKU: 66671756](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-4mm-thread-m8x1-sku-66671756/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 4mm thread M6 SKU: 66671755](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-4mm-thread-m6-sku-66671755/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 3mm thread M6x0,75 SKU: 66671754](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-3mm-thread-m6x075-sku-66671754/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 3mm thread M6 SKU: 66671753](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-3mm-thread-m6-sku-66671753/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type BK pin diameter 10mm thread M16x1,5 SKU: 66671752](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-10mm-thread-m16x15-sku-66671752/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 8mm thread M16x1,5 SKU: 66671751](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-8mm-thread-m16x15-sku-66671751/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 8mm thread M12x1,5 SKU: 66671750](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-8mm-thread-m12x15-sku-66671750/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 8mm thread M12 SKU: 66671749](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-8mm-thread-m12-sku-66671749/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 6mm thread M12x1,5 SKU: 66671748](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-6mm-thread-m12x15-sku-66671748/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 6mm thread M10 SKU: 66671747](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-6mm-thread-m10-sku-66671747/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 5mm thread M10x1 SKU: 66671746](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-5mm-thread-m10x1-sku-66671746/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 5mm thread M8 SKU: 66671744](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-5mm-thread-m8-sku-66671744/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 4mm thread M8x1 SKU: 66671743](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-4mm-thread-m8x1-sku-66671743/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 4mm thread M6 SKU: 66671742](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-4mm-thread-m6-sku-66671742/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 3mm thread M6x0,75 SKU: 66671741](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-3mm-thread-m6x075-sku-66671741/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type BK pin diameter 3mm thread M6 SKU: 66671740](https://maedler.in/product/index-plunger-717-type-bk-pin-diameter-3mm-thread-m6-sku-66671740/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 10mm thread M16x1,5 SKU: 66671739](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-10mm-thread-m16x15-sku-66671739/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 8mm thread M16x1,5 SKU: 66671738](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-8mm-thread-m16x15-sku-66671738/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 8mm thread M12x1,5 SKU: 66671737](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-8mm-thread-m12x15-sku-66671737/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 8mm thread M12 SKU: 66671736](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-8mm-thread-m12-sku-66671736/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Index plunger 717 type B pin diameter 6mm thread M12x1,5 SKU: 66671735](https://maedler.in/product/index-plunger-717-type-b-pin-diameter-6mm-thread-m12x15-sku-66671735/): Material: Body zinc plated, blue passivated. Plunger pin stainless steel 1.4305. Spring and lifting ring (type A/K) stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers without rest position are used where, on releasing the knob or lifting ring, the plunger pin should be returned to its initial position by the spring force. During assembly, do not exceed the fastening torque TA. Type A: without rest position, with lifting ring, without counter nut. Type AK: without rest position, with lifting ring, with counter nut. Type B: without rest position, with knob, without counter nut. Type BK: without rest position, with knob, with counter nut. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 14H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-14h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 12H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-12h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 40 teeth for belt width 10mm 21 T5/40-2 SKU: 16224000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-40-teeth-for-belt-width-10mm-21-t5-40-2-sku-16224000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 25H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-25h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 20H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-20h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 16H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-16h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 15H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-15h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 14H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-14h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 12H7 for belt width 10mm ALK32T5/40-2 SKU: 162240K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-12h7-for-belt-width-10mm-alk32t5-40-2-sku-162240k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 36 teeth for belt width 10mm 21 T5/36-2 SKU: 16223600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-36-teeth-for-belt-width-10mm-21-t5-36-2-sku-16223600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 25H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-25h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 20H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-20h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 16H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-16h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 15H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-15h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 14H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-14h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 12H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-12h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 10H7 for belt width 10mm ALK28T5/36-2 SKU: 162236K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-10h7-for-belt-width-10mm-alk28t5-36-2-sku-162236k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 32 teeth for belt width 10mm 21 T5/32-2 SKU: 16223200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-32-teeth-for-belt-width-10mm-21-t5-32-2-sku-16223200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 20H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-20h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 16H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-16h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 15H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-15h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 14H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-14h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 12H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-12h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 10H7 for belt width 10mm ALK28T5/32-2 SKU: 162232K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-10h7-for-belt-width-10mm-alk28t5-32-2-sku-162232k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 30 teeth for belt width 10mm 21 T5/30-2 SKU: 16223000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-30-teeth-for-belt-width-10mm-21-t5-30-2-sku-16223000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 20H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-20h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 16H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-16h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 15H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-15h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 14H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-14h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 12H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-12h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 10H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-10h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 8H7 for belt width 10mm ALK28T5/30-2 SKU: 162230K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-8h7-for-belt-width-10mm-alk28t5-30-2-sku-162230k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 28 teeth for belt width 10mm 21 T5/28-2 SKU: 16222800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-28-teeth-for-belt-width-10mm-21-t5-28-2-sku-16222800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 16H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-16h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 15H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-15h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 14H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-14h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 12H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-12h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 10H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-10h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 8H7 for belt width 10mm ALK28T5/28-2 SKU: 162228K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-8h7-for-belt-width-10mm-alk28t5-28-2-sku-162228k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 27 teeth for belt width 10mm 21 T5/27-2 SKU: 16222700](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-27-teeth-for-belt-width-10mm-21-t5-27-2-sku-16222700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 16H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-16h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 15H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-15h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 14H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-14h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 12H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-12h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 10H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-10h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 8H7 for belt width 10mm ALK28T5/27-2 SKU: 162227K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-8h7-for-belt-width-10mm-alk28t5-27-2-sku-162227k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 26 teeth for belt width 10mm 21 T5/26-2 SKU: 16222600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-26-teeth-for-belt-width-10mm-21-t5-26-2-sku-16222600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 14H7 for belt width 10mm ALK28T5/26-2 SKU: 162226K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-14h7-for-belt-width-10mm-alk28t5-26-2-sku-162226k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 12H7 for belt width 10mm ALK28T5/26-2 SKU: 162226K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-12h7-for-belt-width-10mm-alk28t5-26-2-sku-162226k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 10H7 for belt width 10mm ALK28T5/26-2 SKU: 162226K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-10h7-for-belt-width-10mm-alk28t5-26-2-sku-162226k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 8H7 for belt width 10mm ALK28T5/26-2 SKU: 162226K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-8h7-for-belt-width-10mm-alk28t5-26-2-sku-162226k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 25 teeth for belt width 10mm 21 T5/25-2 SKU: 16222500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-25-teeth-for-belt-width-10mm-21-t5-25-2-sku-16222500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 14H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-14h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 12H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-12h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 10H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-10h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 8H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-8h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 6H7 for belt width 10mm ALK28T5/25-2 SKU: 162225K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-6h7-for-belt-width-10mm-alk28t5-25-2-sku-162225k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 24 teeth for belt width 10mm 21 T5/24-2 SKU: 16222400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-24-teeth-for-belt-width-10mm-21-t5-24-2-sku-16222400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 12H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-12h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 10H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-10h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 8H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-8h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 6H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-6h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 5H7 for belt width 10mm ALK25T5/24-2 SKU: 162224K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-5h7-for-belt-width-10mm-alk25t5-24-2-sku-162224k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 22 teeth for belt width 10mm 21 T5/22-2 SKU: 16222200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-22-teeth-for-belt-width-10mm-21-t5-22-2-sku-16222200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 12H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-12h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 10H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-10h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 8H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-8h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 6H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-6h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 5H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-5h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 4H7 for belt width 10mm ALK25T5/22-2 SKU: 162222K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-4h7-for-belt-width-10mm-alk25t5-22-2-sku-162222k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 20 teeth for belt width 10mm 21 T5/20-2 SKU: 16222000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-20-teeth-for-belt-width-10mm-21-t5-20-2-sku-16222000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 10H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-10h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 8H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-8h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 6H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-6h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 5H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-5h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 4H7 for belt width 10mm ALK25T5/20-2 SKU: 162220K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-4h7-for-belt-width-10mm-alk25t5-20-2-sku-162220k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 19 teeth for belt width 10mm 21 T5/19-2 SKU: 16221900](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-19-teeth-for-belt-width-10mm-21-t5-19-2-sku-16221900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 10H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-10h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 8H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-8h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 6H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-6h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 5H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-5h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 4H7 for belt width 10mm ALK25T5/19-2 SKU: 162219K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-4h7-for-belt-width-10mm-alk25t5-19-2-sku-162219k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 18 teeth for belt width 10mm 21 T5/18-2 SKU: 16221800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-18-teeth-for-belt-width-10mm-21-t5-18-2-sku-16221800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 8H7 for belt width 10mm ALK23T5/18-2 SKU: 162218K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-8h7-for-belt-width-10mm-alk23t5-18-2-sku-162218k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 6H7 for belt width 10mm ALK23T5/18-2 SKU: 162218K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-6h7-for-belt-width-10mm-alk23t5-18-2-sku-162218k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 5H7 for belt width 10mm ALK23T5/18-2 SKU: 162218K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-5h7-for-belt-width-10mm-alk23t5-18-2-sku-162218k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 4H7 for belt width 10mm ALK23T5/18-2 SKU: 162218K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-4h7-for-belt-width-10mm-alk23t5-18-2-sku-162218k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 16 teeth for belt width 10mm 21 T5/16-2 SKU: 16221600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-16-teeth-for-belt-width-10mm-21-t5-16-2-sku-16221600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 8H7 for belt width 10mm ALK23T5/16-2 SKU: 162216K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-8h7-for-belt-width-10mm-alk23t5-16-2-sku-162216k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 6H7 for belt width 10mm ALK23T5/16-2 SKU: 162216K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-6h7-for-belt-width-10mm-alk23t5-16-2-sku-162216k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 5H7 for belt width 10mm ALK23T5/16-2 SKU: 162216K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-5h7-for-belt-width-10mm-alk23t5-16-2-sku-162216k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 4H7 for belt width 10mm ALK23T5/16-2 SKU: 162216K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-4h7-for-belt-width-10mm-alk23t5-16-2-sku-162216k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 15 teeth for belt width 10mm 21 T5/15-2 SKU: 16221500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-15-teeth-for-belt-width-10mm-21-t5-15-2-sku-16221500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 6H7 for belt width 10mm ALK23T5/15-2 SKU: 162215K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-6h7-for-belt-width-10mm-alk23t5-15-2-sku-162215k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 5H7 for belt width 10mm ALK23T5/15-2 SKU: 162215K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-5h7-for-belt-width-10mm-alk23t5-15-2-sku-162215k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 4H7 for belt width 10mm ALK23T5/15-2 SKU: 162215K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-4h7-for-belt-width-10mm-alk23t5-15-2-sku-162215k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 14 teeth for belt width 10mm 21 T5/14-2 SKU: 16221400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-14-teeth-for-belt-width-10mm-21-t5-14-2-sku-16221400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 6H7 for belt width 10mm ALK23T5/14-2 SKU: 162214K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-6h7-for-belt-width-10mm-alk23t5-14-2-sku-162214k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 5H7 for belt width 10mm ALK23T5/14-2 SKU: 162214K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-5h7-for-belt-width-10mm-alk23t5-14-2-sku-162214k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 4H7 for belt width 10mm ALK23T5/14-2 SKU: 162214K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-4h7-for-belt-width-10mm-alk23t5-14-2-sku-162214k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Bow-type handle 425 length 100mm stainless steel 1.4305 SKU: 66699614](https://maedler.in/product/bow-type-handle-425-length-100mm-stainless-steel-1-4305-sku-66699614/): Material: Stainless Steel 1.4305 (AISI 303), matt finish, sand blasted. Note: Cabinet U-handles 425 are as standard supplied with two zinc-plated location discs. These discs guarantee perfect positioning even with large bores in the cabinet. The washers are loosely packed. - [Bow-type handle 425 length 88mm stainless steel 1.4305 SKU: 66699612](https://maedler.in/product/bow-type-handle-425-length-88mm-stainless-steel-1-4305-sku-66699612/): Material: Stainless Steel 1.4305 (AISI 303), matt finish, sand blasted. Note: Cabinet U-handles 425 are as standard supplied with two zinc-plated location discs. These discs guarantee perfect positioning even with large bores in the cabinet. The washers are loosely packed. - [Tubular handle 335 length 600 mm stainless steel 1.4305 / 1.4308 SKU: 66699562](https://maedler.in/product/tubular-handle-335-length-600-mm-stainless-steel-1-4305-1-4308-sku-66699562/): Material: Grip tube Ø28mm x 2 mm made from stainless steel 1.4305 (AISI 303), silk matt gloss, ground. Feet made from stainless steel, precision cast 1.4308 (CF-8), matt blasted. Very high stability for small sizes. Connection between tube and foot is sealed against water spray. Other sizes on request. - [Tubular handle 335 length 500 mm stainless steel 1.4305 / 1.4308 SKU: 66699560](https://maedler.in/product/tubular-handle-335-length-500-mm-stainless-steel-1-4305-1-4308-sku-66699560/): Material: Grip tube Ø28mm x 2 mm made from stainless steel 1.4305 (AISI 303), silk matt gloss, ground. Feet made from stainless steel, precision cast 1.4308 (CF-8), matt blasted. Very high stability for small sizes. Connection between tube and foot is sealed against water spray. Other sizes on request. - [Tubular handle 335 length 400 mm stainless steel 1.4305 / 1.4308 SKU: 66699558](https://maedler.in/product/tubular-handle-335-length-400-mm-stainless-steel-1-4305-1-4308-sku-66699558/): Material: Grip tube Ø28mm x 2 mm made from stainless steel 1.4305 (AISI 303), silk matt gloss, ground. Feet made from stainless steel, precision cast 1.4308 (CF-8), matt blasted. Very high stability for small sizes. Connection between tube and foot is sealed against water spray. Other sizes on request. - [Tubular handle 335 length 300 mm stainless steel 1.4305 / 1.4308 SKU: 66699556](https://maedler.in/product/tubular-handle-335-length-300-mm-stainless-steel-1-4305-1-4308-sku-66699556/): Material: Grip tube Ø28mm x 2 mm made from stainless steel 1.4305 (AISI 303), silk matt gloss, ground. Feet made from stainless steel, precision cast 1.4308 (CF-8), matt blasted. Very high stability for small sizes. Connection between tube and foot is sealed against water spray. Other sizes on request. - [Tubular handle 335 length 250 mm stainless steel 1.4305 / 1.4308 SKU: 66699554](https://maedler.in/product/tubular-handle-335-length-250-mm-stainless-steel-1-4305-1-4308-sku-66699554/): Material: Grip tube Ø28mm x 2 mm made from stainless steel 1.4305 (AISI 303), silk matt gloss, ground. Feet made from stainless steel, precision cast 1.4308 (CF-8), matt blasted. Very high stability for small sizes. Connection between tube and foot is sealed against water spray. Other sizes on request. - [Tubular handle 335 length 200 mm stainless steel 1.4305 / 1.4308 SKU: 66699552](https://maedler.in/product/tubular-handle-335-length-200-mm-stainless-steel-1-4305-1-4308-sku-66699552/): Material: Grip tube Ø28mm x 2 mm made from stainless steel 1.4305 (AISI 303), silk matt gloss, ground. Feet made from stainless steel, precision cast 1.4308 (CF-8), matt blasted. Very high stability for small sizes. Connection between tube and foot is sealed against water spray. Other sizes on request. - [Gear lever handle 209 with cylindrical knob M12 l1 200mm stainless steel SKU: 66699113](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m12-l1-200mm-stainless-steel-sku-66699113/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M12 l1 160mm stainless steel SKU: 66699112](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m12-l1-160mm-stainless-steel-sku-66699112/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M10 l1 160mm stainless steel SKU: 66699111](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m10-l1-160mm-stainless-steel-sku-66699111/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M10 l1 125mm stainless steel SKU: 66699110](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m10-l1-125mm-stainless-steel-sku-66699110/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M8 l1 125mm stainless steel SKU: 66699109](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m8-l1-125mm-stainless-steel-sku-66699109/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M8 l1 100mm stainless steel SKU: 66699108](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m8-l1-100mm-stainless-steel-sku-66699108/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M6 l1 100mm stainless steel SKU: 66699107](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m6-l1-100mm-stainless-steel-sku-66699107/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with cylindrical knob M6 l1 80mm stainless steel SKU: 66699106](https://maedler.in/product/gear-lever-handle-209-with-cylindrical-knob-m6-l1-80mm-stainless-steel-sku-66699106/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Cylindrical knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M12 l1 200mm stainless steel SKU: 66699013](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m12-l1-200mm-stainless-steel-sku-66699013/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M12 l1 160mm stainless steel SKU: 66699012](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m12-l1-160mm-stainless-steel-sku-66699012/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M10 l1 160mm stainless steel SKU: 66699011](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m10-l1-160mm-stainless-steel-sku-66699011/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M10 l1 125mm stainless steel SKU: 66699010](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m10-l1-125mm-stainless-steel-sku-66699010/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M8 l1 125mm stainless steel SKU: 66699009](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m8-l1-125mm-stainless-steel-sku-66699009/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M8 l1 100mm stainless steel SKU: 66699008](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m8-l1-100mm-stainless-steel-sku-66699008/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M6 l1 100mm stainless steel SKU: 66699007](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m6-l1-100mm-stainless-steel-sku-66699007/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Gear lever handle 209 with ball knob M6 l1 80mm stainless steel SKU: 66699006](https://maedler.in/product/gear-lever-handle-209-with-ball-knob-m6-l1-80mm-stainless-steel-sku-66699006/): Material: Stainless steel 1.4305 (AISI 303) matt finish. Ball knob: Plastic Duroplast PF31 black, polished.The knob is screwed on. - [Index plunger 612 version BK M20 x 1,5 Ø12mm SKU: 66689200](https://maedler.in/product/index-plunger-612-version-bk-m20-x-15-o12mm-sku-66689200/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version BK M20 x 1,5 Ø10mm SKU: 66689000](https://maedler.in/product/index-plunger-612-version-bk-m20-x-15-o10mm-sku-66689000/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version BK M16 x 1,5 Ø10mm SKU: 66688900](https://maedler.in/product/index-plunger-612-version-bk-m16-x-15-o10mm-sku-66688900/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version BK M20 x 1,5 Ø8mm SKU: 66688800](https://maedler.in/product/index-plunger-612-version-bk-m20-x-15-o8mm-sku-66688800/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version BK M16 x 1,5 Ø8mm SKU: 66688700](https://maedler.in/product/index-plunger-612-version-bk-m16-x-15-o8mm-sku-66688700/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version BK M12 x 1,5 Ø8mm SKU: 66688600](https://maedler.in/product/index-plunger-612-version-bk-m12-x-15-o8mm-sku-66688600/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version BK M16 x 1,5 Ø6mm SKU: 66688500](https://maedler.in/product/index-plunger-612-version-bk-m16-x-15-o6mm-sku-66688500/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version BK M12 x 1,5 Ø6mm SKU: 66688400](https://maedler.in/product/index-plunger-612-version-bk-m12-x-15-o6mm-sku-66688400/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version BK M12 x 1,5 Ø5mm SKU: 66688300](https://maedler.in/product/index-plunger-612-version-bk-m12-x-15-o5mm-sku-66688300/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version AK M20 x 1,5 Ø12mm SKU: 66688200](https://maedler.in/product/index-plunger-612-version-ak-m20-x-15-o12mm-sku-66688200/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version AK M20 x 1,5 Ø10mm SKU: 66688000](https://maedler.in/product/index-plunger-612-version-ak-m20-x-15-o10mm-sku-66688000/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version AK M16 x 1,5 Ø10mm SKU: 66687900](https://maedler.in/product/index-plunger-612-version-ak-m16-x-15-o10mm-sku-66687900/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version AK M20 x 1,5 Ø8mm SKU: 66687800](https://maedler.in/product/index-plunger-612-version-ak-m20-x-15-o8mm-sku-66687800/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version AK M16 x 1,5 Ø8mm SKU: 66687700](https://maedler.in/product/index-plunger-612-version-ak-m16-x-15-o8mm-sku-66687700/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version AK M12 x 1,5 Ø8mm SKU: 66687600](https://maedler.in/product/index-plunger-612-version-ak-m12-x-15-o8mm-sku-66687600/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version AK M16 x 1,5 Ø6mm SKU: 66687500](https://maedler.in/product/index-plunger-612-version-ak-m16-x-15-o6mm-sku-66687500/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version AK M12 x 1,5 Ø6mm SKU: 66687400](https://maedler.in/product/index-plunger-612-version-ak-m12-x-15-o6mm-sku-66687400/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version AK M12 x 1,5 Ø5mm SKU: 66687300](https://maedler.in/product/index-plunger-612-version-ak-m12-x-15-o5mm-sku-66687300/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Cabinet U handle 565.2 length 160mm material aluminium SKU: 66686600](https://maedler.in/product/cabinet-u-handle-565-2-length-160mm-material-aluminium-sku-66686600/): Material: Aluminium plastic coated, matt finish, black RAL 9011. Cabinet U-handles 565.2 are a further development of the cabinet U-handles 565. The angled contact surface allows improved access even in confined spaces such as corners. Drawn from profiled aluminium extrusions their special features are rigidity and a smooth surface. Good design and ergonomical shaping were essential for the choice of the profile. When coated with epoxy resin its tactile friendliness is further enhanced. - [Cabinet U handle 565.2 length 128mm material aluminium SKU: 66686400](https://maedler.in/product/cabinet-u-handle-565-2-length-128mm-material-aluminium-sku-66686400/): Material: Aluminium plastic coated, matt finish, black RAL 9011. Cabinet U-handles 565.2 are a further development of the cabinet U-handles 565. The angled contact surface allows improved access even in confined spaces such as corners. Drawn from profiled aluminium extrusions their special features are rigidity and a smooth surface. Good design and ergonomical shaping were essential for the choice of the profile. When coated with epoxy resin its tactile friendliness is further enhanced. - [Cabinet U handle 565.2 length 128mm material aluminium SKU: 66686200](https://maedler.in/product/cabinet-u-handle-565-2-length-128mm-material-aluminium-sku-66686200/): Material: Aluminium plastic coated, matt finish, black RAL 9011. Cabinet U-handles 565.2 are a further development of the cabinet U-handles 565. The angled contact surface allows improved access even in confined spaces such as corners. Drawn from profiled aluminium extrusions their special features are rigidity and a smooth surface. Good design and ergonomical shaping were essential for the choice of the profile. When coated with epoxy resin its tactile friendliness is further enhanced. - [Cabinet U handle 565.2 length 112mm material aluminium SKU: 66686000](https://maedler.in/product/cabinet-u-handle-565-2-length-112mm-material-aluminium-sku-66686000/): Material: Aluminium plastic coated, matt finish, black RAL 9011. Cabinet U-handles 565.2 are a further development of the cabinet U-handles 565. The angled contact surface allows improved access even in confined spaces such as corners. Drawn from profiled aluminium extrusions their special features are rigidity and a smooth surface. Good design and ergonomical shaping were essential for the choice of the profile. When coated with epoxy resin its tactile friendliness is further enhanced. - [Arch handle shape B 192mm bore 6.4mm SKU: 66685700](https://maedler.in/product/arch-handle-shape-b-192mm-bore-6-4mm-sku-66685700/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape B 160mm bore 6.4mm SKU: 66685600](https://maedler.in/product/arch-handle-shape-b-160mm-bore-6-4mm-sku-66685600/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape B 160mm bore 5.3mm SKU: 66685400](https://maedler.in/product/arch-handle-shape-b-160mm-bore-5-3mm-sku-66685400/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape B 192mm bore 6.4mm SKU: 66685300](https://maedler.in/product/arch-handle-shape-b-192mm-bore-6-4mm-sku-66685300/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape B 160mm M8 SKU: 66685200](https://maedler.in/product/arch-handle-shape-b-160mm-m8-sku-66685200/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape B 160mm bore 5.3mm SKU: 66685000](https://maedler.in/product/arch-handle-shape-b-160mm-bore-5-3mm-sku-66685000/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape A 160mm M8 SKU: 66684600](https://maedler.in/product/arch-handle-shape-a-160mm-m8-sku-66684600/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape A 192mm M6 SKU: 66684500](https://maedler.in/product/arch-handle-shape-a-192mm-m6-sku-66684500/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape A 160mm M6 SKU: 66684400](https://maedler.in/product/arch-handle-shape-a-160mm-m6-sku-66684400/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape A 160mm M6 SKU: 66684200](https://maedler.in/product/arch-handle-shape-a-160mm-m6-sku-66684200/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape A 192mm M6 SKU: 66684100](https://maedler.in/product/arch-handle-shape-a-192mm-m6-sku-66684100/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Arch handle shape A 160mm M6 SKU: 66684000](https://maedler.in/product/arch-handle-shape-a-160mm-m6-sku-66684000/): Material: Aluminium, natural colour, anodized or plastic coated in matt black finish. These arched handles are noted for their elegant design. The well-proven elliptical profile has been used again. Shape A: Mounting from the back. Shape B: Mounting from the operating side. Version SW: Black plastic coated (RAL 9005). Version EL: Natural colour, anodized. - [Index plunger 612 version B M20 x 1,5 Ø12mm SKU: 66679200](https://maedler.in/product/index-plunger-612-version-b-m20-x-15-o12mm-sku-66679200/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version B M20 x 1,5 Ø10mm SKU: 66679000](https://maedler.in/product/index-plunger-612-version-b-m20-x-15-o10mm-sku-66679000/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version B M16 x 1,5 Ø10mm SKU: 66678900](https://maedler.in/product/index-plunger-612-version-b-m16-x-15-o10mm-sku-66678900/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version B M20 x 1,5 Ø8mm SKU: 66678800](https://maedler.in/product/index-plunger-612-version-b-m20-x-15-o8mm-sku-66678800/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version B M16 x 1,5 Ø8mm SKU: 66678700](https://maedler.in/product/index-plunger-612-version-b-m16-x-15-o8mm-sku-66678700/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version B M12 x 1,5 Ø8mm SKU: 66678600](https://maedler.in/product/index-plunger-612-version-b-m12-x-15-o8mm-sku-66678600/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version B M16 x 1,5 Ø6mm SKU: 66678500](https://maedler.in/product/index-plunger-612-version-b-m16-x-15-o6mm-sku-66678500/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version B M12 x 1,5 Ø6mm SKU: 66678400](https://maedler.in/product/index-plunger-612-version-b-m12-x-15-o6mm-sku-66678400/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version B M12 x 1,5 Ø5mm SKU: 66678300](https://maedler.in/product/index-plunger-612-version-b-m12-x-15-o5mm-sku-66678300/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version A M20 x 1,5 Ø12mm SKU: 66678200](https://maedler.in/product/index-plunger-612-version-a-m20-x-15-o12mm-sku-66678200/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version A M20 x 1,5 Ø10mm SKU: 66678000](https://maedler.in/product/index-plunger-612-version-a-m20-x-15-o10mm-sku-66678000/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version A M16 x 1,5 Ø10mm SKU: 66677900](https://maedler.in/product/index-plunger-612-version-a-m16-x-15-o10mm-sku-66677900/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version A M20 x 1,5 Ø8mm SKU: 66677800](https://maedler.in/product/index-plunger-612-version-a-m20-x-15-o8mm-sku-66677800/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version A M16 x 1,5 Ø8mm SKU: 66677700](https://maedler.in/product/index-plunger-612-version-a-m16-x-15-o8mm-sku-66677700/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version A M12 x 1,5 Ø8mm SKU: 66677600](https://maedler.in/product/index-plunger-612-version-a-m12-x-15-o8mm-sku-66677600/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version A M16 x 1,5 Ø6mm SKU: 66677500](https://maedler.in/product/index-plunger-612-version-a-m16-x-15-o6mm-sku-66677500/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version A M12 x 1,5 Ø6mm SKU: 66677400](https://maedler.in/product/index-plunger-612-version-a-m12-x-15-o6mm-sku-66677400/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 612 version A M12 x 1,5 Ø5mm SKU: 66677300](https://maedler.in/product/index-plunger-612-version-a-m12-x-15-o5mm-sku-66677300/): Material: Steel, black oxide finish, plunger pin: Hardened. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A: Without counter nut, without plastic cap. Version B: Without counter nut, with plastic cap. Version AK: With counter nut, without plastic cap. Version BK: With counter nut, with plastic cap. - [Index plunger 817 version GK bolt diameter 10mm SKU: 66675000](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-10mm-sku-66675000/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version GK bolt diameter 8mm SKU: 66674800](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-8mm-sku-66674800/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version GK bolt diameter 6mm SKU: 66674600](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-6mm-sku-66674600/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version GK bolt diameter 5mm SKU: 66674500](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-5mm-sku-66674500/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version GK bolt diameter 4mm SKU: 66674400](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-4mm-sku-66674400/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 10mm SKU: 66674000](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-10mm-sku-66674000/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 8mm SKU: 66673800](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-8mm-sku-66673800/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 6mm SKU: 66673600](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-6mm-sku-66673600/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 5mm SKU: 66673500](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-5mm-sku-66673500/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 4mm SKU: 66673400](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-4mm-sku-66673400/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version CK bolt diameter 10mm SKU: 66672000](https://maedler.in/product/index-plunger-817-version-ck-bolt-diameter-10mm-sku-66672000/): Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer's request is required or where the plunger pin is not shifted manually. - [Index plunger 717 type CK pin diameter 10mm thread M16x1,5 stainless steel SKU: 66671878](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-10mm-thread-m16x15-stainless-steel-sku-66671878/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 8mm thread M16x1,5 stainless steel SKU: 66671877](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-8mm-thread-m16x15-stainless-steel-sku-66671877/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 8mm thread M12x1,5 stainless steel SKU: 66671876](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-8mm-thread-m12x15-stainless-steel-sku-66671876/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 8mm thread M12 stainless steel SKU: 66671875](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-8mm-thread-m12-stainless-steel-sku-66671875/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 6mm thread M12x1,5 stainless steel SKU: 66671874](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-6mm-thread-m12x15-stainless-steel-sku-66671874/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 6mm thread M10 stainless steel SKU: 66671873](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-6mm-thread-m10-stainless-steel-sku-66671873/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 5mm thread M10x1 stainless steel SKU: 66671872](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-5mm-thread-m10x1-stainless-steel-sku-66671872/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 5mm thread M8 stainless steel SKU: 66671870](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-5mm-thread-m8-stainless-steel-sku-66671870/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 4mm thread M8x1 stainless steel SKU: 66671869](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-4mm-thread-m8x1-stainless-steel-sku-66671869/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 4mm thread M6 stainless steel SKU: 66671868](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-4mm-thread-m6-stainless-steel-sku-66671868/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type CK pin diameter 3mm thread M6 stainless steel SKU: 66671866](https://maedler.in/product/index-plunger-717-type-ck-pin-diameter-3mm-thread-m6-stainless-steel-sku-66671866/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 10mm thread M16x1,5 stainless steel SKU: 66671865](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-10mm-thread-m16x15-stainless-steel-sku-66671865/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Index plunger 717 type C pin diameter 8mm thread M16x1,5 stainless steel SKU: 66671864](https://maedler.in/product/index-plunger-717-type-c-pin-diameter-8mm-thread-m16x15-stainless-steel-sku-66671864/): Material: Body stainless steel 1.4305 (AISI 303). Plunger pin stainless steel 1.4305 (AISI 303). Spring stainless steel 1.4310. Knob (type B/BK) plastic (Polyamide PA) black, matt finish, not removable. Indexing plungers 717 are reasonably priced, with small dimensions, for applications where high precision indexing is not required. Indexing Plungers with rest position are used where the pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Type C: with rest position, with knob, without counter nut. Type CK: with rest position, with knob ring, with counter nut. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 15H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-15h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 14H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-14h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 12H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-12h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 10H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-10h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 8H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-8h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 28 teeth for belt width 16mm 27 T5/28-2 SKU: 16232800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-28-teeth-for-belt-width-16mm-27-t5-28-2-sku-16232800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 16H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-16h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 15H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-15h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 14H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-14h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 12H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-12h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 10H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-10h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 28 teeth bore 8H7 for belt width 16mm ALK34T5/28-2 SKU: 162328K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-28-teeth-bore-8h7-for-belt-width-16mm-alk34t5-28-2-sku-162328k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 27 teeth for belt width 16mm 27 T5/27-2 SKU: 16232700](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-27-teeth-for-belt-width-16mm-27-t5-27-2-sku-16232700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 16H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-16h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 15H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-15h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 14H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-14h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 12H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-12h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 10H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-10h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 27 teeth bore 8H7 for belt width 16mm ALK34T5/27-2 SKU: 162327K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-27-teeth-bore-8h7-for-belt-width-16mm-alk34t5-27-2-sku-162327k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 26 teeth for belt width 16mm 27 T5/26-2 SKU: 16232600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-26-teeth-for-belt-width-16mm-27-t5-26-2-sku-16232600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 14H7 for belt width 16mm ALK34T5/26-2 SKU: 162326K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-14h7-for-belt-width-16mm-alk34t5-26-2-sku-162326k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 12H7 for belt width 16mm ALK34T5/26-2 SKU: 162326K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-12h7-for-belt-width-16mm-alk34t5-26-2-sku-162326k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 10H7 for belt width 16mm ALK34T5/26-2 SKU: 162326K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-10h7-for-belt-width-16mm-alk34t5-26-2-sku-162326k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 26 teeth bore 8H7 for belt width 16mm ALK34T5/26-2 SKU: 162326K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-26-teeth-bore-8h7-for-belt-width-16mm-alk34t5-26-2-sku-162326k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 25 teeth for belt width 16mm 27 T5/25-2 SKU: 16232500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-25-teeth-for-belt-width-16mm-27-t5-25-2-sku-16232500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 14H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-14h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 12H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-12h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 10H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-10h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 8H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-8h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 25 teeth bore 6H7 for belt width 16mm ALK34T5/25-2 SKU: 162325K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-25-teeth-bore-6h7-for-belt-width-16mm-alk34t5-25-2-sku-162325k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 24 teeth for belt width 16mm 27 T5/24-2 SKU: 16232400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-24-teeth-for-belt-width-16mm-27-t5-24-2-sku-16232400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 12H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-12h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 10H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-10h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 8H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-8h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 6H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-6h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 24 teeth bore 5H7 for belt width 16mm ALK31T5/24-2 SKU: 162324K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-24-teeth-bore-5h7-for-belt-width-16mm-alk31t5-24-2-sku-162324k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 22 teeth for belt width 16mm 27 T5/22-2 SKU: 16232200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-22-teeth-for-belt-width-16mm-27-t5-22-2-sku-16232200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 12H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-12h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 10H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-10h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 8H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-8h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 6H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-6h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 5H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-5h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 22 teeth bore 4H7 for belt width 16mm ALK31T5/22-2 SKU: 162322K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-22-teeth-bore-4h7-for-belt-width-16mm-alk31t5-22-2-sku-162322k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 20 teeth for belt width 16mm 27 T5/20-2 SKU: 16232000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-20-teeth-for-belt-width-16mm-27-t5-20-2-sku-16232000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 10H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-10h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 8H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-8h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 6H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-6h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 5H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-5h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 20 teeth bore 4H7 for belt width 16mm ALK31T5/20-2 SKU: 162320K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-20-teeth-bore-4h7-for-belt-width-16mm-alk31t5-20-2-sku-162320k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 19 teeth for belt width 16mm 27 T5/19-2 SKU: 16231900](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-19-teeth-for-belt-width-16mm-27-t5-19-2-sku-16231900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 10H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-10h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 8H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-8h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 6H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-6h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 5H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-5h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 19 teeth bore 4H7 for belt width 16mm ALK31T5/19-2 SKU: 162319K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-19-teeth-bore-4h7-for-belt-width-16mm-alk31t5-19-2-sku-162319k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 18 teeth for belt width 16mm 27 T5/18-2 SKU: 16231800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-18-teeth-for-belt-width-16mm-27-t5-18-2-sku-16231800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 8H7 for belt width 16mm ALK29T5/18-2 SKU: 162318K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-8h7-for-belt-width-16mm-alk29t5-18-2-sku-162318k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 6H7 for belt width 16mm ALK29T5/18-2 SKU: 162318K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-6h7-for-belt-width-16mm-alk29t5-18-2-sku-162318k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 5H7 for belt width 16mm ALK29T5/18-2 SKU: 162318K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-5h7-for-belt-width-16mm-alk29t5-18-2-sku-162318k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 18 teeth bore 4H7 for belt width 16mm ALK29T5/18-2 SKU: 162318K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-18-teeth-bore-4h7-for-belt-width-16mm-alk29t5-18-2-sku-162318k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 16 teeth for belt width 16mm 27 T5/16-2 SKU: 16231600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-16-teeth-for-belt-width-16mm-27-t5-16-2-sku-16231600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 8H7 for belt width 16mm ALK29T5/16-2 SKU: 162316K08](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-8h7-for-belt-width-16mm-alk29t5-16-2-sku-162316k08/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 6H7 for belt width 16mm ALK29T5/16-2 SKU: 162316K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-6h7-for-belt-width-16mm-alk29t5-16-2-sku-162316k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 5H7 for belt width 16mm ALK29T5/16-2 SKU: 162316K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-5h7-for-belt-width-16mm-alk29t5-16-2-sku-162316k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 16 teeth bore 4H7 for belt width 16mm ALK29T5/16-2 SKU: 162316K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-16-teeth-bore-4h7-for-belt-width-16mm-alk29t5-16-2-sku-162316k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 15 teeth for belt width 16mm 27 T5/15-2 SKU: 16231500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-15-teeth-for-belt-width-16mm-27-t5-15-2-sku-16231500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 6H7 for belt width 16mm ALK29T5/15-2 SKU: 162315K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-6h7-for-belt-width-16mm-alk29t5-15-2-sku-162315k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 5H7 for belt width 16mm ALK29T5/15-2 SKU: 162315K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-5h7-for-belt-width-16mm-alk29t5-15-2-sku-162315k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 15 teeth bore 4H7 for belt width 16mm ALK29T5/15-2 SKU: 162315K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-15-teeth-bore-4h7-for-belt-width-16mm-alk29t5-15-2-sku-162315k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 14 teeth for belt width 16mm 27 T5/14-2 SKU: 16231400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-14-teeth-for-belt-width-16mm-27-t5-14-2-sku-16231400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 6H7 for belt width 16mm ALK29T5/14-2 SKU: 162314K06](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-6h7-for-belt-width-16mm-alk29t5-14-2-sku-162314k06/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 5H7 for belt width 16mm ALK29T5/14-2 SKU: 162314K05](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-5h7-for-belt-width-16mm-alk29t5-14-2-sku-162314k05/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 14 teeth bore 4H7 for belt width 16mm ALK29T5/14-2 SKU: 162314K04](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-14-teeth-bore-4h7-for-belt-width-16mm-alk29t5-14-2-sku-162314k04/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 13 teeth for belt width 16 mm 27 T5/13-2 SKU: 16231300](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-13-teeth-for-belt-width-16-mm-27-t5-13-2-sku-16231300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 12 teeth for belt width 16mm 27 T5/12-2 SKU: 16231200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-12-teeth-for-belt-width-16mm-27-t5-12-2-sku-16231200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 11 teeth for belt width 16 mm 27 T5/11-2 SKU: 16231100](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-11-teeth-for-belt-width-16-mm-27-t5-11-2-sku-16231100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 10 teeth for belt width 16mm 27 T5/10-2 SKU: 16231000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-10-teeth-for-belt-width-16mm-27-t5-10-2-sku-16231000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 96 teeth for belt width 10 mm 21 T5/96-0 SKU: 16229600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-96-teeth-for-belt-width-10-mm-21-t5-96-0-sku-16229600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 84 teeth for belt width 10 mm 21 T5/84-0 SKU: 16228400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-84-teeth-for-belt-width-10-mm-21-t5-84-0-sku-16228400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 72 teeth for belt width 10 mm 21 T5/72-0 SKU: 16227200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-72-teeth-for-belt-width-10-mm-21-t5-72-0-sku-16227200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 60 teeth for belt width 10mm 21 T5/60-0 SKU: 16226000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-60-teeth-for-belt-width-10mm-21-t5-60-0-sku-16226000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 25H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-25h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 20H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-20h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 16H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-16h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 15H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-15h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 14H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-14h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 12H7 for belt width 10mm ALK32T5/60-0 SKU: 162260K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-12h7-for-belt-width-10mm-alk32t5-60-0-sku-162260k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 48 teeth for belt width 10mm 21 T5/48-0 SKU: 16224800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-48-teeth-for-belt-width-10mm-21-t5-48-0-sku-16224800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 25H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-25h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 20H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-20h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 16H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-16h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 15H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-15h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 14H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-14h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 12H7 for belt width 10mm ALK32T5/48-0 SKU: 162248K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-12h7-for-belt-width-10mm-alk32t5-48-0-sku-162248k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 44 teeth for belt width 10mm 21 T5/44-0 SKU: 16224400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-44-teeth-for-belt-width-10mm-21-t5-44-0-sku-16224400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 42 teeth for belt width 10mm 21 T5/42-2 SKU: 16224200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-42-teeth-for-belt-width-10mm-21-t5-42-2-sku-16224200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 25H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-25h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 20H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-20h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 16H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-16h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 15H7 for belt width 10mm ALK32T5/42-2 SKU: 162242K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-15h7-for-belt-width-10mm-alk32t5-42-2-sku-162242k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Cranked handle DIN 468 Tg with revolving ball handle length 200mm type 1 SKU: 66822000](https://maedler.in/product/cranked-handle-din-468-tg-with-revolving-ball-handle-length-200mm-type-1-sku-66822000/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with revolving ball handle length 160mm type 1 SKU: 66821600](https://maedler.in/product/cranked-handle-din-468-tg-with-revolving-ball-handle-length-160mm-type-1-sku-66821600/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with revolving ball handle length 125mm type 1 SKU: 66821200](https://maedler.in/product/cranked-handle-din-468-tg-with-revolving-ball-handle-length-125mm-type-1-sku-66821200/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with revolving ball handle length 100mm type 1 SKU: 66821000](https://maedler.in/product/cranked-handle-din-468-tg-with-revolving-ball-handle-length-100mm-type-1-sku-66821000/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with revolving ball handle length 80 mm type 1 SKU: 66820800](https://maedler.in/product/cranked-handle-din-468-tg-with-revolving-ball-handle-length-80-mm-type-1-sku-66820800/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with fixed ball handle length 315mm type 1 SKU: 66803100](https://maedler.in/product/cranked-handle-din-468-tg-with-fixed-ball-handle-length-315mm-type-1-sku-66803100/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with fixed ball handle length 250mm type 1 SKU: 66802500](https://maedler.in/product/cranked-handle-din-468-tg-with-fixed-ball-handle-length-250mm-type-1-sku-66802500/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with fixed ball handle length 200mm type 1 SKU: 66802000](https://maedler.in/product/cranked-handle-din-468-tg-with-fixed-ball-handle-length-200mm-type-1-sku-66802000/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with fixed ball handle length 160mm type 1 SKU: 66801600](https://maedler.in/product/cranked-handle-din-468-tg-with-fixed-ball-handle-length-160mm-type-1-sku-66801600/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with fixed ball handle length 125mm type 1 SKU: 66801200](https://maedler.in/product/cranked-handle-din-468-tg-with-fixed-ball-handle-length-125mm-type-1-sku-66801200/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with fixed ball handle length 100mm type 1 SKU: 66801000](https://maedler.in/product/cranked-handle-din-468-tg-with-fixed-ball-handle-length-100mm-type-1-sku-66801000/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with fixed ball handle length 80 mm type 1 SKU: 66800800](https://maedler.in/product/cranked-handle-din-468-tg-with-fixed-ball-handle-length-80-mm-type-1-sku-66800800/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Tri-ball handle 2140 l=50mm material steel with machine handle DIN 39 SKU: 66745000](https://maedler.in/product/tri-ball-handle-2140-l50mm-material-steel-with-machine-handle-din-39-sku-66745000/): Material: Steel zinc plated. With fixed handle DIN 39. With through hole. - [Tri-ball handle 2140 l=41mm material steel with machine handle DIN 39 SKU: 66744100](https://maedler.in/product/tri-ball-handle-2140-l41mm-material-steel-with-machine-handle-din-39-sku-66744100/): Material: Steel zinc plated. With fixed handle DIN 39. With through hole. - [Tri-ball handle 2140 l=34mm material steel with machine handle DIN 39 SKU: 66743400](https://maedler.in/product/tri-ball-handle-2140-l34mm-material-steel-with-machine-handle-din-39-sku-66743400/): Material: Steel zinc plated. With fixed handle DIN 39. With through hole. - [Tri-ball handle 2140 l=25mm material steel with machine handle DIN 39 SKU: 66742500](https://maedler.in/product/tri-ball-handle-2140-l25mm-material-steel-with-machine-handle-din-39-sku-66742500/): Material: Steel zinc plated. With fixed handle DIN 39. With through hole. - [Cranked handle 471 aluminium with revolving cylindrical plastic handle length 160mm SKU: 66731600](https://maedler.in/product/cranked-handle-471-aluminium-with-revolving-cylindrical-plastic-handle-length-160mm-sku-66731600/): Material: Crank body: Up to length 80mm made from zinc die-cast, from length 100mm made from aluminium. Revolving cylindrical handle: Plastic black. Hand cranks 471 are of modern design. - [Cranked handle 471 aluminium with revolving cylindrical plastic handle length 125mm SKU: 66731200](https://maedler.in/product/cranked-handle-471-aluminium-with-revolving-cylindrical-plastic-handle-length-125mm-sku-66731200/): Material: Crank body: Up to length 80mm made from zinc die-cast, from length 100mm made from aluminium. Revolving cylindrical handle: Plastic black. Hand cranks 471 are of modern design. - [Cranked handle 471 aluminium with revolving cylindrical plastic handle length 100mm SKU: 66731000](https://maedler.in/product/cranked-handle-471-aluminium-with-revolving-cylindrical-plastic-handle-length-100mm-sku-66731000/): Material: Crank body: Up to length 80mm made from zinc die-cast, from length 100mm made from aluminium. Revolving cylindrical handle: Plastic black. Hand cranks 471 are of modern design. - [Cranked handle 471 aluminium with revolving cylindrical plastic handle length 80mm SKU: 66730800](https://maedler.in/product/cranked-handle-471-aluminium-with-revolving-cylindrical-plastic-handle-length-80mm-sku-66730800/): Material: Crank body: Up to length 80mm made from zinc die-cast, from length 100mm made from aluminium. Revolving cylindrical handle: Plastic black. Hand cranks 471 are of modern design. - [Cranked handle 471 aluminium with revolving cylindrical plastic handle length 64mm SKU: 66730600](https://maedler.in/product/cranked-handle-471-aluminium-with-revolving-cylindrical-plastic-handle-length-64mm-sku-66730600/): Material: Crank body: Up to length 80mm made from zinc die-cast, from length 100mm made from aluminium. Revolving cylindrical handle: Plastic black. Hand cranks 471 are of modern design. - [Cranked handle 569 made from plastic square hole SW 14mm length 130mm SKU: 66721300](https://maedler.in/product/cranked-handle-569-made-from-plastic-square-hole-sw-14mm-length-130mm-sku-66721300/): Material: Plastic Thermoplast reinforced Crank body made from plastic. Hub insert: steel, black oxide finish, brass-threaded bush for screwing in the cylindrical handle. Cylindrical handle made from black plastic and revolving. The protruding steel bush ensures an accurate bore and a flush fit of the bore face. It can be retained with a pin or a retaining screw. Version B = with bore H7 Version V = with square bore H11. - [Cranked handle 569 made from plastic square hole SW 12mm length 100mm SKU: 66721000](https://maedler.in/product/cranked-handle-569-made-from-plastic-square-hole-sw-12mm-length-100mm-sku-66721000/): Material: Plastic Thermoplast reinforced Crank body made from plastic. Hub insert: steel, black oxide finish, brass-threaded bush for screwing in the cylindrical handle. Cylindrical handle made from black plastic and revolving. The protruding steel bush ensures an accurate bore and a flush fit of the bore face. It can be retained with a pin or a retaining screw. Version B = with bore H7 Version V = with square bore H11. - [Cranked handle 569 made from plastic square hole SW 10mm length 80mm SKU: 66720800](https://maedler.in/product/cranked-handle-569-made-from-plastic-square-hole-sw-10mm-length-80mm-sku-66720800/): Material: Plastic Thermoplast reinforced Crank body made from plastic. Hub insert: steel, black oxide finish, brass-threaded bush for screwing in the cylindrical handle. Cylindrical handle made from black plastic and revolving. The protruding steel bush ensures an accurate bore and a flush fit of the bore face. It can be retained with a pin or a retaining screw. Version B = with bore H7 Version V = with square bore H11. - [Cranked handle 569 made from plastic square hole SW 10mm length 64mm SKU: 66720600](https://maedler.in/product/cranked-handle-569-made-from-plastic-square-hole-sw-10mm-length-64mm-sku-66720600/): Material: Plastic Thermoplast reinforced Crank body made from plastic. Hub insert: steel, black oxide finish, brass-threaded bush for screwing in the cylindrical handle. Cylindrical handle made from black plastic and revolving. The protruding steel bush ensures an accurate bore and a flush fit of the bore face. It can be retained with a pin or a retaining screw. Version B = with bore H7 Version V = with square bore H11. - [Cranked handle 569 made from plastic bore 16H7 length 160mm SKU: 66711600](https://maedler.in/product/cranked-handle-569-made-from-plastic-bore-16h7-length-160mm-sku-66711600/): Material: Plastic Thermoplast reinforced Crank body made from plastic. Hub insert: steel, black oxide finish, brass-threaded bush for screwing in the cylindrical handle. Cylindrical handle made from black plastic and revolving. The protruding steel bush ensures an accurate bore and a flush fit of the bore face. It can be retained with a pin or a retaining screw. Version B = with bore H7 Version V = with square bore H11. - [Cranked handle 569 made from plastic bore 14H7 length 130mm SKU: 66711300](https://maedler.in/product/cranked-handle-569-made-from-plastic-bore-14h7-length-130mm-sku-66711300/): Material: Plastic Thermoplast reinforced Crank body made from plastic. Hub insert: steel, black oxide finish, brass-threaded bush for screwing in the cylindrical handle. Cylindrical handle made from black plastic and revolving. The protruding steel bush ensures an accurate bore and a flush fit of the bore face. It can be retained with a pin or a retaining screw. Version B = with bore H7 Version V = with square bore H11. - [Cranked handle 569 made from plastic bore 12H7 length 100mm SKU: 66711000](https://maedler.in/product/cranked-handle-569-made-from-plastic-bore-12h7-length-100mm-sku-66711000/): Material: Plastic Thermoplast reinforced Crank body made from plastic. Hub insert: steel, black oxide finish, brass-threaded bush for screwing in the cylindrical handle. Cylindrical handle made from black plastic and revolving. The protruding steel bush ensures an accurate bore and a flush fit of the bore face. It can be retained with a pin or a retaining screw. Version B = with bore H7 Version V = with square bore H11. - [Cranked handle 569 made from plastic bore 10H7 length 80mm SKU: 66710800](https://maedler.in/product/cranked-handle-569-made-from-plastic-bore-10h7-length-80mm-sku-66710800/): Material: Plastic Thermoplast reinforced Crank body made from plastic. Hub insert: steel, black oxide finish, brass-threaded bush for screwing in the cylindrical handle. Cylindrical handle made from black plastic and revolving. The protruding steel bush ensures an accurate bore and a flush fit of the bore face. It can be retained with a pin or a retaining screw. Version B = with bore H7 Version V = with square bore H11. - [Cranked handle 569 made from plastic bore 10H7 length 64mm SKU: 66710600](https://maedler.in/product/cranked-handle-569-made-from-plastic-bore-10h7-length-64mm-sku-66710600/): Material: Plastic Thermoplast reinforced Crank body made from plastic. Hub insert: steel, black oxide finish, brass-threaded bush for screwing in the cylindrical handle. Cylindrical handle made from black plastic and revolving. The protruding steel bush ensures an accurate bore and a flush fit of the bore face. It can be retained with a pin or a retaining screw. Version B = with bore H7 Version V = with square bore H11. - [Index plunger 612 version BK-N M20 x 1,5 Ø12mm SKU: 66699892](https://maedler.in/product/index-plunger-612-version-bk-n-m20-x-15-o12mm-sku-66699892/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version BK-N M20 x 1,5 Ø10mm SKU: 66699890](https://maedler.in/product/index-plunger-612-version-bk-n-m20-x-15-o10mm-sku-66699890/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version BK-N M16 x 1,5 Ø10mm SKU: 66699889](https://maedler.in/product/index-plunger-612-version-bk-n-m16-x-15-o10mm-sku-66699889/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version BK-N M20 x 1,5 Ø8mm SKU: 66699888](https://maedler.in/product/index-plunger-612-version-bk-n-m20-x-15-o8mm-sku-66699888/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version BK-N M16 x 1,5 Ø8mm SKU: 66699887](https://maedler.in/product/index-plunger-612-version-bk-n-m16-x-15-o8mm-sku-66699887/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version BK-N M12 x 1,5 Ø8mm SKU: 66699886](https://maedler.in/product/index-plunger-612-version-bk-n-m12-x-15-o8mm-sku-66699886/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version BK-N M16 x 1,5 Ø6mm SKU: 66699885](https://maedler.in/product/index-plunger-612-version-bk-n-m16-x-15-o6mm-sku-66699885/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version BK-N M12 x 1,5 Ø6mm SKU: 66699884](https://maedler.in/product/index-plunger-612-version-bk-n-m12-x-15-o6mm-sku-66699884/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version BK-N M12 x 1,5 Ø5mm SKU: 66699883](https://maedler.in/product/index-plunger-612-version-bk-n-m12-x-15-o5mm-sku-66699883/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version AK-N M20 x 1,5 Ø12mm SKU: 66699882](https://maedler.in/product/index-plunger-612-version-ak-n-m20-x-15-o12mm-sku-66699882/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version AK-N M20 x 1,5 Ø10mm SKU: 66699880](https://maedler.in/product/index-plunger-612-version-ak-n-m20-x-15-o10mm-sku-66699880/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version AK-N M16 x 1,5 Ø10mm SKU: 66699879](https://maedler.in/product/index-plunger-612-version-ak-n-m16-x-15-o10mm-sku-66699879/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version AK-N M20 x 1,5 Ø8mm SKU: 66699878](https://maedler.in/product/index-plunger-612-version-ak-n-m20-x-15-o8mm-sku-66699878/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version AK-N M16 x 1,5 Ø8mm SKU: 66699877](https://maedler.in/product/index-plunger-612-version-ak-n-m16-x-15-o8mm-sku-66699877/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version AK-N M12 x 1,5 Ø8mm SKU: 66699876](https://maedler.in/product/index-plunger-612-version-ak-n-m12-x-15-o8mm-sku-66699876/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version AK-N M16 x 1,5 Ø6mm SKU: 66699875](https://maedler.in/product/index-plunger-612-version-ak-n-m16-x-15-o6mm-sku-66699875/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version AK-N M12 x 1,5 Ø6mm SKU: 66699874](https://maedler.in/product/index-plunger-612-version-ak-n-m12-x-15-o6mm-sku-66699874/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version AK-N M12 x 1,5 Ø5mm SKU: 66699873](https://maedler.in/product/index-plunger-612-version-ak-n-m12-x-15-o5mm-sku-66699873/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version B-N M20 x 1,5 Ø12mm SKU: 66699792](https://maedler.in/product/index-plunger-612-version-b-n-m20-x-15-o12mm-sku-66699792/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version B-N M20 x 1,5 Ø10mm SKU: 66699790](https://maedler.in/product/index-plunger-612-version-b-n-m20-x-15-o10mm-sku-66699790/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version B-N M16 x 1,5 Ø10mm SKU: 66699789](https://maedler.in/product/index-plunger-612-version-b-n-m16-x-15-o10mm-sku-66699789/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version B-N M20 x 1,5 Ø8mm SKU: 66699788](https://maedler.in/product/index-plunger-612-version-b-n-m20-x-15-o8mm-sku-66699788/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version B-N M16 x 1,5 Ø8mm SKU: 66699787](https://maedler.in/product/index-plunger-612-version-b-n-m16-x-15-o8mm-sku-66699787/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version B-N M12 x 1,5 Ø8mm SKU: 66699786](https://maedler.in/product/index-plunger-612-version-b-n-m12-x-15-o8mm-sku-66699786/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version B-N M16 x 1,5 Ø6mm SKU: 66699785](https://maedler.in/product/index-plunger-612-version-b-n-m16-x-15-o6mm-sku-66699785/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version B-N M12 x 1,5 Ø6mm SKU: 66699784](https://maedler.in/product/index-plunger-612-version-b-n-m12-x-15-o6mm-sku-66699784/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version B-N M12 x 1,5 Ø5mm SKU: 66699783](https://maedler.in/product/index-plunger-612-version-b-n-m12-x-15-o5mm-sku-66699783/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version A-N M20 x 1,5 Ø12mm SKU: 66699782](https://maedler.in/product/index-plunger-612-version-a-n-m20-x-15-o12mm-sku-66699782/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version A-N M20 x 1,5 Ø10mm SKU: 66699780](https://maedler.in/product/index-plunger-612-version-a-n-m20-x-15-o10mm-sku-66699780/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version A-N M16 x 1,5 Ø10mm SKU: 66699779](https://maedler.in/product/index-plunger-612-version-a-n-m16-x-15-o10mm-sku-66699779/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version A-N M20 x 1,5 Ø8mm SKU: 66699778](https://maedler.in/product/index-plunger-612-version-a-n-m20-x-15-o8mm-sku-66699778/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version A-N M16 x 1,5 Ø8mm SKU: 66699777](https://maedler.in/product/index-plunger-612-version-a-n-m16-x-15-o8mm-sku-66699777/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version A-N M12 x 1,5 Ø8mm SKU: 66699776](https://maedler.in/product/index-plunger-612-version-a-n-m12-x-15-o8mm-sku-66699776/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version A-N M16 x 1,5 Ø6mm SKU: 66699775](https://maedler.in/product/index-plunger-612-version-a-n-m16-x-15-o6mm-sku-66699775/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version A-N M12 x 1,5 Ø6mm SKU: 66699774](https://maedler.in/product/index-plunger-612-version-a-n-m12-x-15-o6mm-sku-66699774/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 612 version A-N M12 x 1,5 Ø5mm SKU: 66699773](https://maedler.in/product/index-plunger-612-version-a-n-m12-x-15-o5mm-sku-66699773/): Material: Stainless steel 1.4305 (AISI 303)/1.4404 (AISI 316 L). Tension spring: 1.4310. Plunger pin: Ground, chemically nickel-plated. Cap: Plastic Thermoplast (polyamide) black, matt finish. Note: cam-action indexing plungers are used if the plunger pin sometimes needs to be retracted, i.e must not stick out. Turning the indexing plunger by 180° causes the plunger pin to retract. There is a notched catch to ensure the plunger can be locked in both positions. Version A-N: Without counter nut, without plastic cap. Version B-N: Without counter nut, with plastic cap. Version AK-N: With counter nut, without plastic cap. Version BK-N: With counter nut, with plastic cap. - [Index plunger 817 version GK bolt diameter 10mm stainless steel 1.4305 SKU: 66699750](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-10mm-stainless-steel-1-4305-sku-66699750/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version GK bolt diameter 8mm stainless steel 1.4305 SKU: 66699748](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-8mm-stainless-steel-1-4305-sku-66699748/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version GK bolt diameter 6mm stainless steel 1.4305 SKU: 66699746](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-6mm-stainless-steel-1-4305-sku-66699746/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version GK bolt diameter 5mm stainless steel 1.4305 SKU: 66699745](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-5mm-stainless-steel-1-4305-sku-66699745/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version GK bolt diameter 4mm stainless steel 1.4305 SKU: 66699744](https://maedler.in/product/index-plunger-817-version-gk-bolt-diameter-4mm-stainless-steel-1-4305-sku-66699744/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 10mm stainless steel 1.4305 SKU: 66699740](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-10mm-stainless-steel-1-4305-sku-66699740/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 8mm stainless steel 1.4305 SKU: 66699738](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-8mm-stainless-steel-1-4305-sku-66699738/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 6mm stainless steel 1.4305 SKU: 66699736](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-6mm-stainless-steel-1-4305-sku-66699736/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 5mm stainless steel 1.4305 SKU: 66699735](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-5mm-stainless-steel-1-4305-sku-66699735/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version G bolt diameter 4mm stainless steel 1.4305 SKU: 66699734](https://maedler.in/product/index-plunger-817-version-g-bolt-diameter-4mm-stainless-steel-1-4305-sku-66699734/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version CK bolt diameter 10mm stainless steel 1.4305 SKU: 66699720](https://maedler.in/product/index-plunger-817-version-ck-bolt-diameter-10mm-stainless-steel-1-4305-sku-66699720/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version CK bolt diameter 8mm stainless steel 1.4305 SKU: 66699718](https://maedler.in/product/index-plunger-817-version-ck-bolt-diameter-8mm-stainless-steel-1-4305-sku-66699718/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version CK bolt diameter 6mm stainless steel 1.4305 SKU: 66699716](https://maedler.in/product/index-plunger-817-version-ck-bolt-diameter-6mm-stainless-steel-1-4305-sku-66699716/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version CK bolt diameter 5mm stainless steel 1.4305 SKU: 66699715](https://maedler.in/product/index-plunger-817-version-ck-bolt-diameter-5mm-stainless-steel-1-4305-sku-66699715/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version CK bolt diameter 4mm stainless steel 1.4305 SKU: 66699714](https://maedler.in/product/index-plunger-817-version-ck-bolt-diameter-4mm-stainless-steel-1-4305-sku-66699714/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version C bolt diameter 10mm stainless steel 1.4305 SKU: 66699710](https://maedler.in/product/index-plunger-817-version-c-bolt-diameter-10mm-stainless-steel-1-4305-sku-66699710/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version C bolt diameter 8mm stainless steel 1.4305 SKU: 66699708](https://maedler.in/product/index-plunger-817-version-c-bolt-diameter-8mm-stainless-steel-1-4305-sku-66699708/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version C bolt diameter 6mm stainless steel 1.4305 SKU: 66699706](https://maedler.in/product/index-plunger-817-version-c-bolt-diameter-6mm-stainless-steel-1-4305-sku-66699706/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version C bolt diameter 5mm stainless steel 1.4305 SKU: 66699705](https://maedler.in/product/index-plunger-817-version-c-bolt-diameter-5mm-stainless-steel-1-4305-sku-66699705/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version C bolt diameter 4mm stainless steel 1.4305 SKU: 66699704](https://maedler.in/product/index-plunger-817-version-c-bolt-diameter-4mm-stainless-steel-1-4305-sku-66699704/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version BK bolt diameter 10mm stainless steel 1.4305 SKU: 66699700](https://maedler.in/product/index-plunger-817-version-bk-bolt-diameter-10mm-stainless-steel-1-4305-sku-66699700/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version BK bolt diameter 8mm stainless steel 1.4305 SKU: 66699698](https://maedler.in/product/index-plunger-817-version-bk-bolt-diameter-8mm-stainless-steel-1-4305-sku-66699698/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version BK bolt diameter 6mm stainless steel 1.4305 SKU: 66699696](https://maedler.in/product/index-plunger-817-version-bk-bolt-diameter-6mm-stainless-steel-1-4305-sku-66699696/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version BK bolt diameter 5mm stainless steel 1.4305 SKU: 66699695](https://maedler.in/product/index-plunger-817-version-bk-bolt-diameter-5mm-stainless-steel-1-4305-sku-66699695/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version BK bolt diameter 4mm stainless steel 1.4305 SKU: 66699694](https://maedler.in/product/index-plunger-817-version-bk-bolt-diameter-4mm-stainless-steel-1-4305-sku-66699694/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version B bolt diameter 10mm stainless steel 1.4305 SKU: 66699690](https://maedler.in/product/index-plunger-817-version-b-bolt-diameter-10mm-stainless-steel-1-4305-sku-66699690/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version B bolt diameter 8mm stainless steel 1.4305 SKU: 66699687](https://maedler.in/product/index-plunger-817-version-b-bolt-diameter-8mm-stainless-steel-1-4305-sku-66699687/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version B bolt diameter 6mm stainless steel 1.4305 SKU: 66699686](https://maedler.in/product/index-plunger-817-version-b-bolt-diameter-6mm-stainless-steel-1-4305-sku-66699686/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version B bolt diameter 5mm stainless steel 1.4305 SKU: 66699685](https://maedler.in/product/index-plunger-817-version-b-bolt-diameter-5mm-stainless-steel-1-4305-sku-66699685/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Index plunger 817 version B bolt diameter 4mm stainless steel 1.4305 SKU: 66699684](https://maedler.in/product/index-plunger-817-version-b-bolt-diameter-4mm-stainless-steel-1-4305-sku-66699684/): Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: - small outer dimensions - most of the release mechanism (version C/CK) is covered - defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually. - [Bow-type handle 425 length 235mm stainless steel 1.4305 SKU: 66699623](https://maedler.in/product/bow-type-handle-425-length-235mm-stainless-steel-1-4305-sku-66699623/): Material: Stainless Steel 1.4305 (AISI 303), matt finish, sand blasted. Note: Cabinet U-handles 425 are as standard supplied with two zinc-plated location discs. These discs guarantee perfect positioning even with large bores in the cabinet. The washers are loosely packed. - [Bow-type handle 425 length 200mm stainless steel 1.4305 SKU: 66699621](https://maedler.in/product/bow-type-handle-425-length-200mm-stainless-steel-1-4305-sku-66699621/): Material: Stainless Steel 1.4305 (AISI 303), matt finish, sand blasted. Note: Cabinet U-handles 425 are as standard supplied with two zinc-plated location discs. These discs guarantee perfect positioning even with large bores in the cabinet. The washers are loosely packed. - [Bow-type handle 425 length 180mm stainless steel 1.4305 SKU: 66699619](https://maedler.in/product/bow-type-handle-425-length-180mm-stainless-steel-1-4305-sku-66699619/): Material: Stainless Steel 1.4305 (AISI 303), matt finish, sand blasted. Note: Cabinet U-handles 425 are as standard supplied with two zinc-plated location discs. These discs guarantee perfect positioning even with large bores in the cabinet. The washers are loosely packed. - [Bow-type handle 425 length 120mm stainless steel 1.4305 SKU: 66699616](https://maedler.in/product/bow-type-handle-425-length-120mm-stainless-steel-1-4305-sku-66699616/): Material: Stainless Steel 1.4305 (AISI 303), matt finish, sand blasted. Note: Cabinet U-handles 425 are as standard supplied with two zinc-plated location discs. These discs guarantee perfect positioning even with large bores in the cabinet. The washers are loosely packed. - [Polyurethane timing belt T5 width 10mm Lw 185mm 37 teeth 10 T5/185 SKU: 16260200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-185mm-37-teeth-10-t5-185-sku-16260200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 165mm 33 teeth 10 T5/165 SKU: 16260100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-165mm-33-teeth-10-t5-165-sku-16260100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm 10T5 open length PAZ = Polyamide fabric on tooth side SKU: 16260001](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-10t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16260001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 10mm 10T5 open length SKU: 16260000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-10t5-open-length-sku-16260000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Timing belt pulley T5 material polyacetal resin 84 teeth for belt width 10mm SKU: 16258400](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-84-teeth-for-belt-width-10mm-sku-16258400/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 72 teeth for belt width 10mm SKU: 16257200](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-72-teeth-for-belt-width-10mm-sku-16257200/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 60 teeth for belt width 10mm SKU: 16256000](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-60-teeth-for-belt-width-10mm-sku-16256000/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 48 teeth for belt width 10mm SKU: 16254800](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-48-teeth-for-belt-width-10mm-sku-16254800/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 40 teeth for belt width 10mm SKU: 16254000](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-40-teeth-for-belt-width-10mm-sku-16254000/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 36 teeth for belt width 10mm SKU: 16253600](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-36-teeth-for-belt-width-10mm-sku-16253600/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 32 teeth for belt width 10mm SKU: 16253200](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-32-teeth-for-belt-width-10mm-sku-16253200/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 28 teeth for belt width 10mm SKU: 16252800](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-28-teeth-for-belt-width-10mm-sku-16252800/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 25 teeth for belt width 10mm SKU: 16252500](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-25-teeth-for-belt-width-10mm-sku-16252500/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 22 teeth for belt width 10mm SKU: 16252200](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-22-teeth-for-belt-width-10mm-sku-16252200/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 20 teeth for belt width 10mm SKU: 16252000](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-20-teeth-for-belt-width-10mm-sku-16252000/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 19 teeth for belt width 10mm SKU: 16251900](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-19-teeth-for-belt-width-10mm-sku-16251900/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 18 teeth for belt width 10mm SKU: 16251800](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-18-teeth-for-belt-width-10mm-sku-16251800/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 17 teeth for belt width 10mm SKU: 16251700](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-17-teeth-for-belt-width-10mm-sku-16251700/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 16 teeth for belt width 10mm SKU: 16251600](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-16-teeth-for-belt-width-10mm-sku-16251600/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 15 teeth for belt width 10mm SKU: 16251500](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-15-teeth-for-belt-width-10mm-sku-16251500/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 14 teeth for belt width 10mm SKU: 16251400](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-14-teeth-for-belt-width-10mm-sku-16251400/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 13 teeth for belt width 10mm SKU: 16251300](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-13-teeth-for-belt-width-10mm-sku-16251300/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material polyacetal resin 12 teeth for belt width 10mm SKU: 16251200](https://maedler.in/product/timing-belt-pulley-t5-material-polyacetal-resin-12-teeth-for-belt-width-10mm-sku-16251200/): Material: Acetal resin in die-cast version, colour black. Bores machined. High hardness and low coefficient of friction which means they can be used in various set-ups, e.g. also under water. Note regarding pulleys made of acetal resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. - [Timing belt pulley T5 material aluminium 96 teeth for belt width 25 mm 36 T5/96-0 SKU: 16249600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-96-teeth-for-belt-width-25-mm-36-t5-96-0-sku-16249600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 84 teeth for belt width 25 mm 36 T5/84-0 SKU: 16248400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-84-teeth-for-belt-width-25-mm-36-t5-84-0-sku-16248400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 72 teeth for belt width 25 mm 36 T5/72-0 SKU: 16247200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-72-teeth-for-belt-width-25-mm-36-t5-72-0-sku-16247200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 60 teeth for belt width 25mm 36 T5/60-0 SKU: 16246000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-60-teeth-for-belt-width-25mm-36-t5-60-0-sku-16246000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 48 teeth for belt width 25mm 36 T5/48-0 SKU: 16244800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-48-teeth-for-belt-width-25mm-36-t5-48-0-sku-16244800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 44 teeth for belt width 25mm 36 T5/44-0 SKU: 16244400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-44-teeth-for-belt-width-25mm-36-t5-44-0-sku-16244400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 42 teeth for belt width 25mm 36 T5/42-2 SKU: 16244200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-42-teeth-for-belt-width-25mm-36-t5-42-2-sku-16244200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 40 teeth for belt width 25mm 36 T5/40-2 SKU: 16244000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-40-teeth-for-belt-width-25mm-36-t5-40-2-sku-16244000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 36 teeth for belt width 25mm 36 T5/36-2 SKU: 16243600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-36-teeth-for-belt-width-25mm-36-t5-36-2-sku-16243600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 32 teeth for belt width 25mm 36 T5/32-2 SKU: 16243200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-32-teeth-for-belt-width-25mm-36-t5-32-2-sku-16243200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 30 teeth for belt width 25mm 36 T5/30-2 SKU: 16243000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-30-teeth-for-belt-width-25mm-36-t5-30-2-sku-16243000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 28 teeth for belt width 25mm 36 T5/28-2 SKU: 16242800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-28-teeth-for-belt-width-25mm-36-t5-28-2-sku-16242800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 27 teeth for belt width 25mm 36 T5/27-2 SKU: 16242700](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-27-teeth-for-belt-width-25mm-36-t5-27-2-sku-16242700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 26 teeth for belt width 25mm 36 T5/26-2 SKU: 16242600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-26-teeth-for-belt-width-25mm-36-t5-26-2-sku-16242600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 25 teeth for belt width 25mm 36 T5/25-2 SKU: 16242500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-25-teeth-for-belt-width-25mm-36-t5-25-2-sku-16242500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 24 teeth for belt width 25mm 36 T5/24-2 SKU: 16242400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-24-teeth-for-belt-width-25mm-36-t5-24-2-sku-16242400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 22 teeth for belt width 25mm 36 T5/22-2 SKU: 16242200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-22-teeth-for-belt-width-25mm-36-t5-22-2-sku-16242200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 20 teeth for belt width 25mm 36 T5/20-2 SKU: 16242000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-20-teeth-for-belt-width-25mm-36-t5-20-2-sku-16242000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 19 teeth for belt width 25mm 36 T5/19-2 SKU: 16241900](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-19-teeth-for-belt-width-25mm-36-t5-19-2-sku-16241900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 18 teeth for belt width 25mm 36 T5/18-2 SKU: 16241800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-18-teeth-for-belt-width-25mm-36-t5-18-2-sku-16241800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 16 teeth for belt width 25mm 36 T5/16-2 SKU: 16241600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-16-teeth-for-belt-width-25mm-36-t5-16-2-sku-16241600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 15 teeth for belt width 25mm 36 T5/15-2 SKU: 16241500](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-15-teeth-for-belt-width-25mm-36-t5-15-2-sku-16241500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 14 teeth for belt width 25mm 36 T5/14-2 SKU: 16241400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-14-teeth-for-belt-width-25mm-36-t5-14-2-sku-16241400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 13 teeth for belt width 25 mm 36 T5/13-2 SKU: 16241300](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-13-teeth-for-belt-width-25-mm-36-t5-13-2-sku-16241300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 12 teeth for belt width 25mm 36 T5/12-2 SKU: 16241200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-12-teeth-for-belt-width-25mm-36-t5-12-2-sku-16241200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 11 teeth for belt width 25 mm 36 T5/11-2 SKU: 16241100](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-11-teeth-for-belt-width-25-mm-36-t5-11-2-sku-16241100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 10 teeth for belt width 25mm 36 T5/10-2 SKU: 16241000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-10-teeth-for-belt-width-25mm-36-t5-10-2-sku-16241000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 96 teeth for belt width 16 mm 27 T5/96-0 SKU: 16239600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-96-teeth-for-belt-width-16-mm-27-t5-96-0-sku-16239600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 84 teeth for belt width 16 mm 27 T5/84-0 SKU: 16238400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-84-teeth-for-belt-width-16-mm-27-t5-84-0-sku-16238400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 72 teeth for belt width 16 mm 27 T5/72-0 SKU: 16237200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-72-teeth-for-belt-width-16-mm-27-t5-72-0-sku-16237200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 60 teeth for belt width 16mm 27 T5/60-0 SKU: 16236000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-60-teeth-for-belt-width-16mm-27-t5-60-0-sku-16236000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 25H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-25h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 20H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-20h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 16H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-16h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 15H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-15h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 14H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-14h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 60 teeth bore 12H7 for belt width 16mm ALK38T5/60-0 SKU: 162360K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-60-teeth-bore-12h7-for-belt-width-16mm-alk38t5-60-0-sku-162360k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 48 teeth for belt width 16mm 27 T5/48-0 SKU: 16234800](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-48-teeth-for-belt-width-16mm-27-t5-48-0-sku-16234800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 25H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-25h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 20H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-20h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 16H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-16h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 15H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-15h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 14H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-14h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 48 teeth bore 12H7 for belt width 16mm ALK38T5/48-0 SKU: 162348K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-48-teeth-bore-12h7-for-belt-width-16mm-alk38t5-48-0-sku-162348k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 44 teeth for belt width 16mm 27 T5/44-0 SKU: 16234400](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-44-teeth-for-belt-width-16mm-27-t5-44-0-sku-16234400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T5 material aluminium 42 teeth for belt width 16mm 27 T5/42-2 SKU: 16234200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-42-teeth-for-belt-width-16mm-27-t5-42-2-sku-16234200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 25H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-25h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 20H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-20h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 16H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-16h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 15H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-15h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 14H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-14h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 42 teeth bore 12H7 for belt width 16mm ALK38T5/42-2 SKU: 162342K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-42-teeth-bore-12h7-for-belt-width-16mm-alk38t5-42-2-sku-162342k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 40 teeth for belt width 16mm 27 T5/40-2 SKU: 16234000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-40-teeth-for-belt-width-16mm-27-t5-40-2-sku-16234000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 25H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-25h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 20H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-20h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 16H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-16h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 15H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-15h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 14H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-14h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 40 teeth bore 12H7 for belt width 16mm ALK38T5/40-2 SKU: 162340K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-40-teeth-bore-12h7-for-belt-width-16mm-alk38t5-40-2-sku-162340k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 36 teeth for belt width 16mm 27 T5/36-2 SKU: 16233600](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-36-teeth-for-belt-width-16mm-27-t5-36-2-sku-16233600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 25H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K25](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-25h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k25/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 20H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-20h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 16H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-16h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 15H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-15h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 14H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-14h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 12H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-12h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 36 teeth bore 10H7 for belt width 16mm ALK34T5/36-2 SKU: 162336K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-36-teeth-bore-10h7-for-belt-width-16mm-alk34t5-36-2-sku-162336k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 32 teeth for belt width 16mm 27 T5/32-2 SKU: 16233200](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-32-teeth-for-belt-width-16mm-27-t5-32-2-sku-16233200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 20H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-20h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 16H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-16h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 15H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K15](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-15h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k15/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 14H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K14](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-14h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k14/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 12H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K12](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-12h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k12/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 32 teeth bore 10H7 for belt width 16mm ALK34T5/32-2 SKU: 162332K10](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-32-teeth-bore-10h7-for-belt-width-16mm-alk34t5-32-2-sku-162332k10/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley T5 material aluminium 30 teeth for belt width 16mm 27 T5/30-2 SKU: 16233000](https://maedler.in/product/timing-belt-pulley-t5-material-aluminium-30-teeth-for-belt-width-16mm-27-t5-30-2-sku-16233000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 20H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K20](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-20h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k20/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Timing belt pulley with clamp hub profile T5 30 teeth bore 16H7 for belt width 16mm ALK34T5/30-2 SKU: 162330K16](https://maedler.in/product/timing-belt-pulley-with-clamp-hub-profile-t5-30-teeth-bore-16h7-for-belt-width-16mm-alk34t5-30-2-sku-162330k16/): Material: Aluminium similar to EN AW2017A. Flanges zinc-plated steel. Screw DIN 912-12.9, black.The hubs of the pulleys are slotted, similar to single-split clamp collars (shaft collars). The pulleys are fixed on the shafts with the clamping screw. No more machining, quick assembly, does not damage the shaft, even distribution of clamping forces.Bore BH7: Bore tolerance in wheel area H7 continuous; in clamping area H7 before slotting. R: Interference circle-Ø screw head. Transmittable torque: Max. Friction torque of the hub. - [Spoked handwheel 320 version N/G with handle diameter 125mm with bore 12H7 and keyway SKU: 67071201](https://maedler.in/product/spoked-handwheel-320-version-n-g-with-handle-diameter-125mm-with-bore-12h7-and-keyway-sku-67071201/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Spoked handwheel 320 version B/G with handle diameter 125mm SKU: 67071200](https://maedler.in/product/spoked-handwheel-320-version-b-g-with-handle-diameter-125mm-sku-67071200/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Spoked handwheel 320 version N/A without handle diameter 250mm with bore 22H7 and keyway SKU: 67070701](https://maedler.in/product/spoked-handwheel-320-version-n-a-without-handle-diameter-250mm-with-bore-22h7-and-keyway-sku-67070701/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version B/A without handle diameter 250mm SKU: 67070700](https://maedler.in/product/spoked-handwheel-320-version-b-a-without-handle-diameter-250mm-sku-67070700/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version N/A without handle diameter 200mm with bore 18H7 and keyway SKU: 67070601](https://maedler.in/product/spoked-handwheel-320-version-n-a-without-handle-diameter-200mm-with-bore-18h7-and-keyway-sku-67070601/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version B/A without handle diameter 200mm SKU: 67070600](https://maedler.in/product/spoked-handwheel-320-version-b-a-without-handle-diameter-200mm-sku-67070600/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version N/A without handle diameter 160mm with bore 14H7 and keyway SKU: 67070501](https://maedler.in/product/spoked-handwheel-320-version-n-a-without-handle-diameter-160mm-with-bore-14h7-and-keyway-sku-67070501/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version B/A without handle diameter 160mm SKU: 67070500](https://maedler.in/product/spoked-handwheel-320-version-b-a-without-handle-diameter-160mm-sku-67070500/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version N/A without handle diameter 140mm with bore 14H7 and keyway SKU: 67070401](https://maedler.in/product/spoked-handwheel-320-version-n-a-without-handle-diameter-140mm-with-bore-14h7-and-keyway-sku-67070401/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version B/A without handle diameter 140mm SKU: 67070400](https://maedler.in/product/spoked-handwheel-320-version-b-a-without-handle-diameter-140mm-sku-67070400/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version N/A without handle diameter 125mm with bore 12H7 and keyway SKU: 67070301](https://maedler.in/product/spoked-handwheel-320-version-n-a-without-handle-diameter-125mm-with-bore-12h7-and-keyway-sku-67070301/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version B/A without handle diameter 125mm SKU: 67070300](https://maedler.in/product/spoked-handwheel-320-version-b-a-without-handle-diameter-125mm-sku-67070300/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Safety handwheel SHR material aluminium diameter 250mm SKU: 67062500](https://maedler.in/product/safety-handwheel-shr-material-aluminium-diameter-250mm-sku-67062500/): Material: Aluminium, polished. Coupling attachment assembled. Can only be supplied with revolving, cylindrical handle made from plastic with threaded steel bolt and with hub keyway. According to safety regulations, handwheels must be mounted on the shaft in such a way that they do not rotate along with the machine drive. Safety handwheels comply with this regulation. Procedure: Wheel disengaged if not used. By axial displacement of the wheel (pulling) the two serrated wheel rims are engaged. The wheel is now positively keyed to the shaft. When the wheel is released, it automatically disengages. The coupling elements are assembled together in an enclosed unit. Coupling attachment made from steel, nitrided, bearing surface ground and PTFE coated, for minimal friction between bearing surfaces and high wear resistance. An oil hole is provided, which serves to connected to a pressure oiler in the wheel hub. Frequent lubrication is an important precondition in guaranteeing the correct functioning of the plain-bearing coupling attachment. The range of application of these handwheels is limited to low shaft speeds, or to higher speeds of only short duration (e.g. feed screws for milling machine table with rapid feed). The coupling attachments can also be supplied separately, to be mounted with existing handwheels. Prices on request. We assume no liability for any consequential damage. - [Safety handwheel SHR material aluminium diameter 200mm SKU: 67062000](https://maedler.in/product/safety-handwheel-shr-material-aluminium-diameter-200mm-sku-67062000/): Material: Aluminium, polished. Coupling attachment assembled. Can only be supplied with revolving, cylindrical handle made from plastic with threaded steel bolt and with hub keyway. According to safety regulations, handwheels must be mounted on the shaft in such a way that they do not rotate along with the machine drive. Safety handwheels comply with this regulation. Procedure: Wheel disengaged if not used. By axial displacement of the wheel (pulling) the two serrated wheel rims are engaged. The wheel is now positively keyed to the shaft. When the wheel is released, it automatically disengages. The coupling elements are assembled together in an enclosed unit. Coupling attachment made from steel, nitrided, bearing surface ground and PTFE coated, for minimal friction between bearing surfaces and high wear resistance. An oil hole is provided, which serves to connected to a pressure oiler in the wheel hub. Frequent lubrication is an important precondition in guaranteeing the correct functioning of the plain-bearing coupling attachment. The range of application of these handwheels is limited to low shaft speeds, or to higher speeds of only short duration (e.g. feed screws for milling machine table with rapid feed). The coupling attachments can also be supplied separately, to be mounted with existing handwheels. Prices on request. We assume no liability for any consequential damage. - [Safety handwheel SHR material aluminium diameter 160mm SKU: 67061600](https://maedler.in/product/safety-handwheel-shr-material-aluminium-diameter-160mm-sku-67061600/): Material: Aluminium, polished. Coupling attachment assembled. Can only be supplied with revolving, cylindrical handle made from plastic with threaded steel bolt and with hub keyway. According to safety regulations, handwheels must be mounted on the shaft in such a way that they do not rotate along with the machine drive. Safety handwheels comply with this regulation. Procedure: Wheel disengaged if not used. By axial displacement of the wheel (pulling) the two serrated wheel rims are engaged. The wheel is now positively keyed to the shaft. When the wheel is released, it automatically disengages. The coupling elements are assembled together in an enclosed unit. Coupling attachment made from steel, nitrided, bearing surface ground and PTFE coated, for minimal friction between bearing surfaces and high wear resistance. An oil hole is provided, which serves to connected to a pressure oiler in the wheel hub. Frequent lubrication is an important precondition in guaranteeing the correct functioning of the plain-bearing coupling attachment. The range of application of these handwheels is limited to low shaft speeds, or to higher speeds of only short duration (e.g. feed screws for milling machine table with rapid feed). The coupling attachments can also be supplied separately, to be mounted with existing handwheels. Prices on request. We assume no liability for any consequential damage. - [Safety handwheel SHR material aluminium diameter 140mm SKU: 67061400](https://maedler.in/product/safety-handwheel-shr-material-aluminium-diameter-140mm-sku-67061400/): Material: Aluminium, polished. Coupling attachment assembled. Can only be supplied with revolving, cylindrical handle made from plastic with threaded steel bolt and with hub keyway. According to safety regulations, handwheels must be mounted on the shaft in such a way that they do not rotate along with the machine drive. Safety handwheels comply with this regulation. Procedure: Wheel disengaged if not used. By axial displacement of the wheel (pulling) the two serrated wheel rims are engaged. The wheel is now positively keyed to the shaft. When the wheel is released, it automatically disengages. The coupling elements are assembled together in an enclosed unit. Coupling attachment made from steel, nitrided, bearing surface ground and PTFE coated, for minimal friction between bearing surfaces and high wear resistance. An oil hole is provided, which serves to connected to a pressure oiler in the wheel hub. Frequent lubrication is an important precondition in guaranteeing the correct functioning of the plain-bearing coupling attachment. The range of application of these handwheels is limited to low shaft speeds, or to higher speeds of only short duration (e.g. feed screws for milling machine table with rapid feed). The coupling attachments can also be supplied separately, to be mounted with existing handwheels. Prices on request. We assume no liability for any consequential damage. - [Safety handwheel SHR material aluminium diameter 125mm SKU: 67061200](https://maedler.in/product/safety-handwheel-shr-material-aluminium-diameter-125mm-sku-67061200/): Material: Aluminium, polished. Coupling attachment assembled. Can only be supplied with revolving, cylindrical handle made from plastic with threaded steel bolt and with hub keyway. According to safety regulations, handwheels must be mounted on the shaft in such a way that they do not rotate along with the machine drive. Safety handwheels comply with this regulation. Procedure: Wheel disengaged if not used. By axial displacement of the wheel (pulling) the two serrated wheel rims are engaged. The wheel is now positively keyed to the shaft. When the wheel is released, it automatically disengages. The coupling elements are assembled together in an enclosed unit. Coupling attachment made from steel, nitrided, bearing surface ground and PTFE coated, for minimal friction between bearing surfaces and high wear resistance. An oil hole is provided, which serves to connected to a pressure oiler in the wheel hub. Frequent lubrication is an important precondition in guaranteeing the correct functioning of the plain-bearing coupling attachment. The range of application of these handwheels is limited to low shaft speeds, or to higher speeds of only short duration (e.g. feed screws for milling machine table with rapid feed). The coupling attachments can also be supplied separately, to be mounted with existing handwheels. Prices on request. We assume no liability for any consequential damage. - [Handwheel with retractable handle 3223 material aluminium version N/G diameter 200mm with bore 18H7 and keyway SKU: 67052001](https://maedler.in/product/handwheel-with-retractable-handle-3223-material-aluminium-version-n-g-diameter-200mm-with-bore-18h7-and-keyway-sku-67052001/): Material: Aluminium gravity die-cast, hub machined, rim turned and polished. Parts of the folding mechanism: Steel hardened and burnished. These handwheels are used in applications where the handle must not stick out. Handle and folding mechanism are fully encased in the rim. The handle is locked in the operating position. To retract it, the handle it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Handwheel with retractable handle 3223 made of aluminium version B/G diameter 200mm SKU: 67052000](https://maedler.in/product/handwheel-with-retractable-handle-3223-made-of-aluminium-version-b-g-diameter-200mm-sku-67052000/): Material: Aluminium gravity die-cast, hub machined, rim turned and polished. Parts of the folding mechanism: Steel hardened and black oxide finished. These handwheels are used in applications where the handle must not stick out. Handle and folding mechanism are fully encased in the rim. The handle is locked in the operating position. To retract it, the handle it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Handwheel with retractable handle 3223 material aluminium version N/G diameter 160mm with bore 14H7 and keyway SKU: 67051601](https://maedler.in/product/handwheel-with-retractable-handle-3223-material-aluminium-version-n-g-diameter-160mm-with-bore-14h7-and-keyway-sku-67051601/): Material: Aluminium gravity die-cast, hub machined, rim turned and polished. Parts of the folding mechanism: Steel hardened and burnished. These handwheels are used in applications where the handle must not stick out. Handle and folding mechanism are fully encased in the rim. The handle is locked in the operating position. To retract it, the handle it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Handwheel with retractable handle 3223 made of aluminium version B/G diameter 160mm SKU: 67051600](https://maedler.in/product/handwheel-with-retractable-handle-3223-made-of-aluminium-version-b-g-diameter-160mm-sku-67051600/): Material: Aluminium gravity die-cast, hub machined, rim turned and polished. Parts of the folding mechanism: Steel hardened and black oxide finished. These handwheels are used in applications where the handle must not stick out. Handle and folding mechanism are fully encased in the rim. The handle is locked in the operating position. To retract it, the handle it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Handwheel with retractable handle 3223 material aluminium version N/G diameter 125mm with bore 12H7 and keyway SKU: 67051201](https://maedler.in/product/handwheel-with-retractable-handle-3223-material-aluminium-version-n-g-diameter-125mm-with-bore-12h7-and-keyway-sku-67051201/): Material: Aluminium gravity die-cast, hub machined, rim turned and polished. Parts of the folding mechanism: Steel hardened and burnished. These handwheels are used in applications where the handle must not stick out. Handle and folding mechanism are fully encased in the rim. The handle is locked in the operating position. To retract it, the handle it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Handwheel with retractable handle 3223 made of aluminium version B/G diameter 125mm SKU: 67051200](https://maedler.in/product/handwheel-with-retractable-handle-3223-made-of-aluminium-version-b-g-diameter-125mm-sku-67051200/): Material: Aluminium gravity die-cast, hub machined, rim turned and polished. Parts of the folding mechanism: Steel hardened and black oxide finished. These handwheels are used in applications where the handle must not stick out. Handle and folding mechanism are fully encased in the rim. The handle is locked in the operating position. To retract it, the handle it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel DIN 3670 with recessed grips version N diameter 200mm with bore 22H7 and keyway SKU: 67042501](https://maedler.in/product/solid-disk-handwheel-din-3670-with-recessed-grips-version-n-diameter-200mm-with-bore-22h7-and-keyway-sku-67042501/): Material: Aluminium, hub machined, rim turned and polished.Without Handle.Version N: With keyway DIN 6885-1.* not according to DIN. - [Solid-Disk handwheel DIN 3670 with recessed grips version B diameter 125mm SKU: 67042500](https://maedler.in/product/solid-disk-handwheel-din-3670-with-recessed-grips-version-b-diameter-125mm-sku-67042500/): Material: Aluminium, hub machined, rim turned and polished.Without Handle.Version B: Without keyway.Version N: With keyway DIN 6885-1.* not according to DIN. - [Solid-Disk handwheel DIN 3670 with recessed grips version N diameter 200mm with bore 18H7 and keyway SKU: 67042001](https://maedler.in/product/solid-disk-handwheel-din-3670-with-recessed-grips-version-n-diameter-200mm-with-bore-18h7-and-keyway-sku-67042001/): Material: Aluminium, hub machined, rim turned and polished.Without Handle.Version B: Without keyway.Version N: With keyway DIN 6885-1.* not according to DIN. - [Solid-Disk handwheel DIN 3670 with recessed grips version B diameter 250mm SKU: 67042000](https://maedler.in/product/solid-disk-handwheel-din-3670-with-recessed-grips-version-b-diameter-250mm-sku-67042000/): Material: Aluminium, hub machined, rim turned and polished.Without Handle.Version B: Without keyway.Version N: With keyway DIN 6885-1.* not according to DIN. - [Solid-Disk handwheel DIN 3670 with recessed grips version N diameter 160mm with bore 14H7 and keyway SKU: 67041601](https://maedler.in/product/solid-disk-handwheel-din-3670-with-recessed-grips-version-n-diameter-160mm-with-bore-14h7-and-keyway-sku-67041601/): Material: Aluminium, hub machined, rim turned and polished.Without Handle.Version B: Without keyway.Version N: With keyway DIN 6885-1.* not according to DIN. - [Solid-Disk handwheel DIN 3670 with recessed grips version B diameter 200mm SKU: 67041600](https://maedler.in/product/solid-disk-handwheel-din-3670-with-recessed-grips-version-b-diameter-200mm-sku-67041600/): Material: Aluminium, hub machined, rim turned and polished.Without Handle.Version B: Without keyway.Version N: With keyway DIN 6885-1.* not according to DIN. - [Solid-Disk handwheel DIN 3670 with recessed grips version N diameter 125mm with bore 12H7 and keyway SKU: 67041201](https://maedler.in/product/solid-disk-handwheel-din-3670-with-recessed-grips-version-n-diameter-125mm-with-bore-12h7-and-keyway-sku-67041201/): Material: Aluminium, hub machined, rim turned and polished.Without Handle.Version N: With keyway DIN 6885-1.* not according to DIN. - [Solid-Disk handwheel DIN 3670 with recessed grips version B diameter 160mm SKU: 67041200](https://maedler.in/product/solid-disk-handwheel-din-3670-with-recessed-grips-version-b-diameter-160mm-sku-67041200/): Material: Aluminium, hub machined, rim turned and polished.Without Handle.Version B: Without keyway.Version N: With keyway DIN 6885-1.* not according to DIN. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 315mm SKU: 67033200](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-315mm-sku-67033200/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 280mm SKU: 67032800](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-280mm-sku-67032800/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 250mm SKU: 67032500](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-250mm-sku-67032500/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 225mm SKU: 67032200](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-225mm-sku-67032200/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 200mm SKU: 67032000](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-200mm-sku-67032000/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 180mm SKU: 67031800](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-180mm-sku-67031800/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 160mm SKU: 67031600](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-160mm-sku-67031600/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 140mm SKU: 67031400](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-140mm-sku-67031400/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 125mm SKU: 67031200](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-125mm-sku-67031200/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 100mm SKU: 67031000](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-100mm-sku-67031000/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Solid-Disk handwheel similar to DIN 950 made of aluminium diameter 80mm SKU: 67030800](https://maedler.in/product/solid-disk-handwheel-similar-to-din-950-made-of-aluminium-diameter-80mm-sku-67030800/): Material: Aluminium, rim of wheel ground and with high-gloss finish.  Outer diameter and hub length according to DIN 950. At some products, the bore diameter is a special size, not like DIN 950.Bigger bore or keyway available at extra charge. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version N/G diameter 315mm with bore 26H7 and keyway with thread hole for machine handle SKU: 67013201](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-n-g-diameter-315mm-with-bore-26h7-and-keyway-with-thread-hole-for-machine-handle-sku-67013201/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version B/G diameter 315mm with thread hole for machine handle SKU: 67013200](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-b-g-diameter-315mm-with-thread-hole-for-machine-handle-sku-67013200/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version N/G diameter 280mm with bore 24H7 and keyway with thread hole for machine handle SKU: 67012801](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-n-g-diameter-280mm-with-bore-24h7-and-keyway-with-thread-hole-for-machine-handle-sku-67012801/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version B/G diameter 280mm with thread hole for machine handle SKU: 67012800](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-b-g-diameter-280mm-with-thread-hole-for-machine-handle-sku-67012800/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version N/G diameter 250mm with bore 22H7 and keyway with thread hole for machine handle SKU: 67012501](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-n-g-diameter-250mm-with-bore-22h7-and-keyway-with-thread-hole-for-machine-handle-sku-67012501/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version B/G diameter 250mm with thread hole for machine handle SKU: 67012500](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-b-g-diameter-250mm-with-thread-hole-for-machine-handle-sku-67012500/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version N/G diameter 225mm with bore 20H7 and keyway with thread hole for machine handle SKU: 67012201](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-n-g-diameter-225mm-with-bore-20h7-and-keyway-with-thread-hole-for-machine-handle-sku-67012201/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version B/G diameter 225mm with thread hole for machine handle SKU: 67012200](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-b-g-diameter-225mm-with-thread-hole-for-machine-handle-sku-67012200/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/G diameter 200mm with bore 18H7 and keyway with thread hole for machine handle SKU: 67012001](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-g-diameter-200mm-with-bore-18h7-and-keyway-with-thread-hole-for-machine-handle-sku-67012001/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/G diameter 200mm with thread hole for machine handle SKU: 67012000](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-g-diameter-200mm-with-thread-hole-for-machine-handle-sku-67012000/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/G diameter 180mm with bore 16H7 and keyway with thread hole for machine handle SKU: 67011801](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-g-diameter-180mm-with-bore-16h7-and-keyway-with-thread-hole-for-machine-handle-sku-67011801/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/G diameter 180mm with thread hole for machine handle SKU: 67011800](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-g-diameter-180mm-with-thread-hole-for-machine-handle-sku-67011800/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/G diameter 160mm with bore 15H7 and keyway with thread hole for machine handle SKU: 67011601](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-g-diameter-160mm-with-bore-15h7-and-keyway-with-thread-hole-for-machine-handle-sku-67011601/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/G diameter 160mm with thread hole for machine handle SKU: 67011600](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-g-diameter-160mm-with-thread-hole-for-machine-handle-sku-67011600/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/G diameter 140mm with bore 14H7 and keyway with thread hole for machine handle SKU: 67011401](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-g-diameter-140mm-with-bore-14h7-and-keyway-with-thread-hole-for-machine-handle-sku-67011401/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/G diameter 140mm with thread hole for machine handle SKU: 67011400](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-g-diameter-140mm-with-thread-hole-for-machine-handle-sku-67011400/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/G diameter 125mm with bore 13H7 and keyway with thread hole for machine handle SKU: 67011201](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-g-diameter-125mm-with-bore-13h7-and-keyway-with-thread-hole-for-machine-handle-sku-67011201/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/G diameter 125mm with thread hole for machine handle SKU: 67011200](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-g-diameter-125mm-with-thread-hole-for-machine-handle-sku-67011200/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/G diameter 100mm with bore 12H7 and keyway with thread hole for machine handle SKU: 67011001](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-g-diameter-100mm-with-bore-12h7-and-keyway-with-thread-hole-for-machine-handle-sku-67011001/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/G diameter 100mm with thread hole for machine handle SKU: 67011000](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-g-diameter-100mm-with-thread-hole-for-machine-handle-sku-67011000/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/G diameter 80mm with bore 10H7 and keyway with thread hole for machine handle SKU: 67010801](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-g-diameter-80mm-with-bore-10h7-and-keyway-with-thread-hole-for-machine-handle-sku-67010801/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/G diameter 80mm with thread hole for machine handle SKU: 67010800](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-g-diameter-80mm-with-thread-hole-for-machine-handle-sku-67010800/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Borehole without keyway. Version N/G: With keyway according to DIN 6885-1. The handle has to be ordered separately. *not according to DIN. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version N/A diameter 315mm with bore 26H7 and keyway SKU: 67003201](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-n-a-diameter-315mm-with-bore-26h7-and-keyway-sku-67003201/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version B/A diameter 315mm SKU: 67003200](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-b-a-diameter-315mm-sku-67003200/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version N/A diameter 280mm with bore 24H7 and keyway SKU: 67002801](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-n-a-diameter-280mm-with-bore-24h7-and-keyway-sku-67002801/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version B/A diameter 280mm SKU: 67002800](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-b-a-diameter-280mm-sku-67002800/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version N/A diameter 250mm with bore 22H7 and keyway SKU: 67002501](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-n-a-diameter-250mm-with-bore-22h7-and-keyway-sku-67002501/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version B/A diameter 250mm SKU: 67002500](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-b-a-diameter-250mm-sku-67002500/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version N/A diameter 225mm with bore 20H7 and keyway SKU: 67002201](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-n-a-diameter-225mm-with-bore-20h7-and-keyway-sku-67002201/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 5 spokes version B/A diameter 225mm SKU: 67002200](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-5-spokes-version-b-a-diameter-225mm-sku-67002200/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/A diameter 200mm with bore 18H7 and keyway SKU: 67002001](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-a-diameter-200mm-with-bore-18h7-and-keyway-sku-67002001/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/A diameter 200mm SKU: 67002000](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-a-diameter-200mm-sku-67002000/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/A diameter 180mm with bore 16H7 and keyway SKU: 67001801](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-a-diameter-180mm-with-bore-16h7-and-keyway-sku-67001801/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/A diameter 180mm SKU: 67001800](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-a-diameter-180mm-sku-67001800/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/A diameter 160mm with bore 15H7 and keyway SKU: 67001601](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-a-diameter-160mm-with-bore-15h7-and-keyway-sku-67001601/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/A diameter 160mm SKU: 67001600](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-a-diameter-160mm-sku-67001600/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/A diameter 140mm with bore 14H7 and keyway SKU: 67001401](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-a-diameter-140mm-with-bore-14h7-and-keyway-sku-67001401/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/A diameter 140mm SKU: 67001400](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-a-diameter-140mm-sku-67001400/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/A diameter 125mm with bore 13H7 and keyway SKU: 67001201](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-a-diameter-125mm-with-bore-13h7-and-keyway-sku-67001201/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/A diameter 125mm SKU: 67001200](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-a-diameter-125mm-sku-67001200/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/A diameter 100mm with bore 12H7 and keyway SKU: 67001001](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-a-diameter-100mm-with-bore-12h7-and-keyway-sku-67001001/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/A diameter 100mm SKU: 67001000](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-a-diameter-100mm-sku-67001000/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version N/A diameter 80mm with bore 10H7 and keyway SKU: 67000801](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-n-a-diameter-80mm-with-bore-10h7-and-keyway-sku-67000801/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway according to DIN 6885-1. - [Spoked handwheel DIN 950 made of aluminium 3 spokes version B/A diameter 80mm SKU: 67000800](https://maedler.in/product/spoked-handwheel-din-950-made-of-aluminium-3-spokes-version-b-a-diameter-80mm-sku-67000800/): Material: Aluminium, wheel rim ground and high-gloss finish. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Borehole without keyway. Version N/A: With keyway according to DIN 6885-1. - [Cranked handle DIN 469 Tg with revolving ball handle length 250mm type 1 SKU: 66922500](https://maedler.in/product/cranked-handle-din-469-tg-with-revolving-ball-handle-length-250mm-type-1-sku-66922500/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with revolving ball handle length 200mm type 1 SKU: 66922000](https://maedler.in/product/cranked-handle-din-469-tg-with-revolving-ball-handle-length-200mm-type-1-sku-66922000/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with revolving ball handle length 160mm type 1 SKU: 66921600](https://maedler.in/product/cranked-handle-din-469-tg-with-revolving-ball-handle-length-160mm-type-1-sku-66921600/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with revolving ball handle length 125mm type 1 SKU: 66921200](https://maedler.in/product/cranked-handle-din-469-tg-with-revolving-ball-handle-length-125mm-type-1-sku-66921200/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with revolving ball handle length 100mm type 1 SKU: 66921000](https://maedler.in/product/cranked-handle-din-469-tg-with-revolving-ball-handle-length-100mm-type-1-sku-66921000/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with revolving ball handle length 80 mm type 1 SKU: 66920800](https://maedler.in/product/cranked-handle-din-469-tg-with-revolving-ball-handle-length-80-mm-type-1-sku-66920800/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with fixed ball handle length 250mm type 1 SKU: 66902500](https://maedler.in/product/cranked-handle-din-469-tg-with-fixed-ball-handle-length-250mm-type-1-sku-66902500/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with fixed ball handle length 200mm type 1 SKU: 66902000](https://maedler.in/product/cranked-handle-din-469-tg-with-fixed-ball-handle-length-200mm-type-1-sku-66902000/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with fixed ball handle length 160mm type 1 SKU: 66901600](https://maedler.in/product/cranked-handle-din-469-tg-with-fixed-ball-handle-length-160mm-type-1-sku-66901600/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with fixed ball handle length 125mm type 1 SKU: 66901200](https://maedler.in/product/cranked-handle-din-469-tg-with-fixed-ball-handle-length-125mm-type-1-sku-66901200/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with fixed ball handle length 100mm type 1 SKU: 66901000](https://maedler.in/product/cranked-handle-din-469-tg-with-fixed-ball-handle-length-100mm-type-1-sku-66901000/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 469 Tg with fixed ball handle length 80 mm type 1 SKU: 66900800](https://maedler.in/product/cranked-handle-din-469-tg-with-fixed-ball-handle-length-80-mm-type-1-sku-66900800/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with revolving ball handle length 315mm type 1 SKU: 66823100](https://maedler.in/product/cranked-handle-din-468-tg-with-revolving-ball-handle-length-315mm-type-1-sku-66823100/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Cranked handle DIN 468 Tg with revolving ball handle length 250mm type 1 SKU: 66822500](https://maedler.in/product/cranked-handle-din-468-tg-with-revolving-ball-handle-length-250mm-type-1-sku-66822500/): Material: Crank body cast iron, plastic coated, textured finish.Handle steel, zinc-plated.Hand cranks: Square hole reamed true to gauge. Hub: Machined, cast iron burr precisely ground. Version F = with fixed handle Version D = with revolving handle - [Polyurethane timing belt T5 width 16mm Lw 510mm 102 teeth 16 T5/510 SKU: 16273500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-510mm-102-teeth-16-t5-510-sku-16273500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 500mm 100 teeth 16 T5/500 SKU: 16273400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-500mm-100-teeth-16-t5-500-sku-16273400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 480mm 96 teeth 16 T5/480 SKU: 16273300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-480mm-96-teeth-16-t5-480-sku-16273300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 475mm 95 teeth 16 T5/475 SKU: 16273200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-475mm-95-teeth-16-t5-475-sku-16273200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 465mm 93 teeth 16 T5/465 SKU: 16273100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-465mm-93-teeth-16-t5-465-sku-16273100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 455mm 91 teeth 16 T5/455 SKU: 16273000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-455mm-91-teeth-16-t5-455-sku-16273000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 450mm 90 teeth 16 T5/450 SKU: 16272900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-450mm-90-teeth-16-t5-450-sku-16272900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 425mm 85 teeth 16 T5/425 SKU: 16272800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-425mm-85-teeth-16-t5-425-sku-16272800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 420mm 84 teeth 16 T5/420 SKU: 16272700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-420mm-84-teeth-16-t5-420-sku-16272700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 410mm 82 teeth 16 T5/410 SKU: 16272600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-410mm-82-teeth-16-t5-410-sku-16272600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 400mm 80 teeth 16 T5/400 SKU: 16272500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-400mm-80-teeth-16-t5-400-sku-16272500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 390mm 78 teeth 16 T5/390 SKU: 16272400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-390mm-78-teeth-16-t5-390-sku-16272400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 375mm 75 teeth 16 T5/375 SKU: 16272300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-375mm-75-teeth-16-t5-375-sku-16272300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 365mm 73 teeth 16 T5/365 SKU: 16272200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-365mm-73-teeth-16-t5-365-sku-16272200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 355mm 71 teeth 16 T5/355 SKU: 16272100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-355mm-71-teeth-16-t5-355-sku-16272100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 350mm 70 teeth 16 T5/350 SKU: 16272000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-350mm-70-teeth-16-t5-350-sku-16272000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 340mm 68 teeth 16 T5/340 SKU: 16271900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-340mm-68-teeth-16-t5-340-sku-16271900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 330mm 66 teeth 16 T5/330 SKU: 16271800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-330mm-66-teeth-16-t5-330-sku-16271800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 325mm 65 teeth 16 T5/325 SKU: 16271700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-325mm-65-teeth-16-t5-325-sku-16271700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 305mm 61 teeth 16 T5/305 SKU: 16271600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-305mm-61-teeth-16-t5-305-sku-16271600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 300mm 60 teeth 16 T5/300 SKU: 16271500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-300mm-60-teeth-16-t5-300-sku-16271500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 295mm 59 teeth 16 T5/295 SKU: 16271400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-295mm-59-teeth-16-t5-295-sku-16271400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 280mm 56 teeth 16 T5/280 SKU: 16271300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-280mm-56-teeth-16-t5-280-sku-16271300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 275mm 55 teeth 16 T5/275 SKU: 16271200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-275mm-55-teeth-16-t5-275-sku-16271200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 270mm 54 teeth 16 T5/270 SKU: 16271100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-270mm-54-teeth-16-t5-270-sku-16271100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 260mm 52 teeth 16 T5/260 SKU: 16271000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-260mm-52-teeth-16-t5-260-sku-16271000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 255mm 51 teeth 16 T5/255 SKU: 16270900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-255mm-51-teeth-16-t5-255-sku-16270900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 250mm 50 teeth 16 T5/250 SKU: 16270800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-250mm-50-teeth-16-t5-250-sku-16270800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 245mm 49 teeth 16 T5/245 SKU: 16270700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-245mm-49-teeth-16-t5-245-sku-16270700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 225mm 45 teeth 16 T5/225 SKU: 16270600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-225mm-45-teeth-16-t5-225-sku-16270600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 220mm 44 teeth 16 T5/220 SKU: 16270500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-220mm-44-teeth-16-t5-220-sku-16270500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 215mm 43 teeth 16 T5/215 SKU: 16270400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-215mm-43-teeth-16-t5-215-sku-16270400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 200mm 40 teeth 16 T5/200 SKU: 16270300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-200mm-40-teeth-16-t5-200-sku-16270300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 185mm 37 teeth 16 T5/185 SKU: 16270200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-185mm-37-teeth-16-t5-185-sku-16270200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 165mm 33 teeth 16 T5/165 SKU: 16270100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-165mm-33-teeth-16-t5-165-sku-16270100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm 16T5 open length PAZ = Polyamide fabric on tooth side SKU: 16270001](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-16t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16270001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 16mm 16 T5 open length SKU: 16270000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-16-t5-open-length-sku-16270000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T5 belt width 10mm SKU: 16269900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-10mm-sku-16269900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T5 width 10mm Lw 1440mm 288 teeth 10 T5/1440 SKU: 16266400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1440mm-288-teeth-10-t5-1440-sku-16266400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1380mm 276 teeth 10 T5/1380 SKU: 16266300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1380mm-276-teeth-10-t5-1380-sku-16266300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1215mm 243 teeth 10 T5/1215 SKU: 16266200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1215mm-243-teeth-10-t5-1215-sku-16266200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1100mm 220 teeth 10 T5/1100 SKU: 16266100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1100mm-220-teeth-10-t5-1100-sku-16266100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1075mm 215 teeth 10 T5/1075 SKU: 16266000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1075mm-215-teeth-10-t5-1075-sku-16266000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 1000mm 200 teeth 10 T5/1000 SKU: 16265900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-1000mm-200-teeth-10-t5-1000-sku-16265900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 990mm 198 teeth 10 T5/990 SKU: 16265800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-990mm-198-teeth-10-t5-990-sku-16265800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 900mm 180 teeth 10 T5/900 SKU: 16265700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-900mm-180-teeth-10-t5-900-sku-16265700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 850mm 170 teeth 10 T5/850 SKU: 16265600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-850mm-170-teeth-10-t5-850-sku-16265600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 840mm 168 teeth 10 T5/840 SKU: 16265500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-840mm-168-teeth-10-t5-840-sku-16265500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 815mm 163 teeth 10 T5/815 SKU: 16265400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-815mm-163-teeth-10-t5-815-sku-16265400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 780mm 156 teeth 10 T5/780 SKU: 16265300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-780mm-156-teeth-10-t5-780-sku-16265300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 750mm 150 teeth 10 T5/750 SKU: 16265200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-750mm-150-teeth-10-t5-750-sku-16265200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 720mm 144 teeth 10 T5/720 SKU: 16265100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-720mm-144-teeth-10-t5-720-sku-16265100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 700mm 140 teeth 10 T5/700 SKU: 16265000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-700mm-140-teeth-10-t5-700-sku-16265000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 695mm 139 teeth 10 T5/695 SKU: 16264900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-695mm-139-teeth-10-t5-695-sku-16264900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 690mm 138 teeth 10 T5/690 SKU: 16264800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-690mm-138-teeth-10-t5-690-sku-16264800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 660mm 132 teeth 10 T5/660 SKU: 16264700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-660mm-132-teeth-10-t5-660-sku-16264700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 650mm 130 teeth 10 T5/650 SKU: 16264600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-650mm-130-teeth-10-t5-650-sku-16264600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 640mm 128 teeth 10 T5/640 SKU: 16264500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-640mm-128-teeth-10-t5-640-sku-16264500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 630mm 126 teeth 10 T5/630 SKU: 16264400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-630mm-126-teeth-10-t5-630-sku-16264400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 620mm 124 teeth 10 T5/620 SKU: 16264300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-620mm-124-teeth-10-t5-620-sku-16264300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 610mm 122 teeth 10 T5/610 SKU: 16264200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-610mm-122-teeth-10-t5-610-sku-16264200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 600mm 120 teeth 10 T5/600 SKU: 16264100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-600mm-120-teeth-10-t5-600-sku-16264100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 575mm 115 teeth 10 T5/575 SKU: 16264000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-575mm-115-teeth-10-t5-575-sku-16264000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 560mm 112 teeth 10 T5/560 SKU: 16263900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-560mm-112-teeth-10-t5-560-sku-16263900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 550mm 110 teeth 10 T5/550 SKU: 16263800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-550mm-110-teeth-10-t5-550-sku-16263800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 545mm 109 teeth 10 T5/545 SKU: 16263700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-545mm-109-teeth-10-t5-545-sku-16263700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 525mm 105 teeth 10 T5/525 SKU: 16263600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-525mm-105-teeth-10-t5-525-sku-16263600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 510mm 102 teeth 10 T5/510 SKU: 16263500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-510mm-102-teeth-10-t5-510-sku-16263500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 500mm 100 teeth 10 T5/500 SKU: 16263400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-500mm-100-teeth-10-t5-500-sku-16263400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 480mm 96 teeth 10 T5/480 SKU: 16263300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-480mm-96-teeth-10-t5-480-sku-16263300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 475mm 95 teeth 10 T5/475 SKU: 16263200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-475mm-95-teeth-10-t5-475-sku-16263200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 465mm 93 teeth 10 T5/465 SKU: 16263100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-465mm-93-teeth-10-t5-465-sku-16263100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 455mm 91 teeth 10 T5/455 SKU: 16263000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-455mm-91-teeth-10-t5-455-sku-16263000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 450mm 90 teeth 10 T5/450 SKU: 16262900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-450mm-90-teeth-10-t5-450-sku-16262900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 425mm 85 teeth 10 T5/425 SKU: 16262800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-425mm-85-teeth-10-t5-425-sku-16262800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 420mm 84 teeth 10 T5/420 SKU: 16262700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-420mm-84-teeth-10-t5-420-sku-16262700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 410mm 82 teeth 10 T5/410 SKU: 16262600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-410mm-82-teeth-10-t5-410-sku-16262600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 400mm 80 teeth 10 T5/400 SKU: 16262500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-400mm-80-teeth-10-t5-400-sku-16262500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 390mm 78 teeth 10 T5/390 SKU: 16262400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-390mm-78-teeth-10-t5-390-sku-16262400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 375mm 75 teeth 10 T5/375 SKU: 16262300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-375mm-75-teeth-10-t5-375-sku-16262300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 365mm 73 teeth 10 T5/365 SKU: 16262200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-365mm-73-teeth-10-t5-365-sku-16262200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 355mm 71 teeth 10 T5/355 SKU: 16262100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-355mm-71-teeth-10-t5-355-sku-16262100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 350mm 70 teeth 10 T5/350 SKU: 16262000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-350mm-70-teeth-10-t5-350-sku-16262000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 340mm 68 teeth 10 T5/340 SKU: 16261900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-340mm-68-teeth-10-t5-340-sku-16261900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 330mm 66 teeth 10 T5/330 SKU: 16261800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-330mm-66-teeth-10-t5-330-sku-16261800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 325mm 65 teeth 10 T5/325 SKU: 16261700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-325mm-65-teeth-10-t5-325-sku-16261700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 305mm 61 teeth 10 T5/305 SKU: 16261600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-305mm-61-teeth-10-t5-305-sku-16261600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 300mm 60 teeth 10 T5/300 SKU: 16261500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-300mm-60-teeth-10-t5-300-sku-16261500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 295mm 59 teeth 10 T5/295 SKU: 16261400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-295mm-59-teeth-10-t5-295-sku-16261400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 280mm 56 teeth 10 T5/280 SKU: 16261300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-280mm-56-teeth-10-t5-280-sku-16261300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 275mm 55 teeth 10 T5/275 SKU: 16261200](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-275mm-55-teeth-10-t5-275-sku-16261200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 270mm 54 teeth 10 T5/270 SKU: 16261100](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-270mm-54-teeth-10-t5-270-sku-16261100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 260mm 52 teeth 10 T5/260 SKU: 16261000](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-260mm-52-teeth-10-t5-260-sku-16261000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 255mm 51 teeth 10 T5/255 SKU: 16260900](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-255mm-51-teeth-10-t5-255-sku-16260900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 250mm 50 teeth 10 T5/250 SKU: 16260800](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-250mm-50-teeth-10-t5-250-sku-16260800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 245mm 49 teeth 10 T5/245 SKU: 16260700](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-245mm-49-teeth-10-t5-245-sku-16260700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 225mm 45 teeth 10 T5/225 SKU: 16260600](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-225mm-45-teeth-10-t5-225-sku-16260600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 220mm 44 teeth 10 T5/220 SKU: 16260500](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-220mm-44-teeth-10-t5-220-sku-16260500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 215mm 43 teeth 10 T5/215 SKU: 16260400](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-215mm-43-teeth-10-t5-215-sku-16260400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 10mm Lw 200mm 40 teeth 10 T5/200 SKU: 16260300](https://maedler.in/product/polyurethane-timing-belt-t5-width-10mm-lw-200mm-40-teeth-10-t5-200-sku-16260300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/A diameter 200mm SKU: 67222000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-a-diameter-200mm-sku-67222000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/A diameter 180mm with bore 16H7 and keyway SKU: 67221801](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-a-diameter-180mm-with-bore-16h7-and-keyway-sku-67221801/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/A diameter 180mm SKU: 67221800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-a-diameter-180mm-sku-67221800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/A diameter 160mm with bore 14H7 and keyway SKU: 67221601](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-a-diameter-160mm-with-bore-14h7-and-keyway-sku-67221601/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/A diameter 160mm SKU: 67221600](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-a-diameter-160mm-sku-67221600/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/A diameter 140mm with bore 14H7 and keyway SKU: 67221401](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-a-diameter-140mm-with-bore-14h7-and-keyway-sku-67221401/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/A diameter 140mm SKU: 67221400](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-a-diameter-140mm-sku-67221400/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/A diameter 125mm with bore 12H7 and keyway SKU: 67221201](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-a-diameter-125mm-with-bore-12h7-and-keyway-sku-67221201/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/A diameter 125mm SKU: 67221200](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-a-diameter-125mm-sku-67221200/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/A diameter 100mm with bore 10H7 and keyway SKU: 67221001](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-a-diameter-100mm-with-bore-10h7-and-keyway-sku-67221001/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/A diameter 100mm SKU: 67221000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-a-diameter-100mm-sku-67221000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/A diameter 80mm with bore 10H7 and keyway SKU: 67220801](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-a-diameter-80mm-with-bore-10h7-and-keyway-sku-67220801/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/A diameter 80mm SKU: 67220800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-a-diameter-80mm-sku-67220800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/A without handle diameter 400mm SKU: 67099940](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-a-without-handle-diameter-400mm-sku-67099940/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/A without handle diameter 315mm SKU: 67099932](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-a-without-handle-diameter-315mm-sku-67099932/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/A without handle diameter 250mm SKU: 67099925](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-a-without-handle-diameter-250mm-sku-67099925/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/A without handle diameter 200mm SKU: 67099920](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-a-without-handle-diameter-200mm-sku-67099920/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/A without handle diameter 160mm SKU: 67099916](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-a-without-handle-diameter-160mm-sku-67099916/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/G with handle diameter 200mm SKU: 67099820](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-g-with-handle-diameter-200mm-sku-67099820/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/G with handle diameter 160mm SKU: 67099816](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-g-with-handle-diameter-160mm-sku-67099816/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/G with handle diameter 140mm SKU: 67099814](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-g-with-handle-diameter-140mm-sku-67099814/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/G with handle diameter 125mm SKU: 67099812](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-g-with-handle-diameter-125mm-sku-67099812/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/G with handle diameter 100mm SKU: 67099810](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-g-with-handle-diameter-100mm-sku-67099810/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/A without handle diameter 200mm SKU: 67099720](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-a-without-handle-diameter-200mm-sku-67099720/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/A without handle diameter 160mm SKU: 67099716](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-a-without-handle-diameter-160mm-sku-67099716/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/A without handle diameter 140mm SKU: 67099714](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-a-without-handle-diameter-140mm-sku-67099714/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/A without handle diameter 125mm SKU: 67099712](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-a-without-handle-diameter-125mm-sku-67099712/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel DIN 950 stainless steel 1.4401 version B/A without handle diameter 100mm SKU: 67099710](https://maedler.in/product/spoked-handwheel-din-950-stainless-steel-1-4401-version-b-a-without-handle-diameter-100mm-sku-67099710/): Material: Material: Wheel body: Cast stainless steel 1.4401 (AISI 316). Rim turned and polished. At version B/G: Handle stainless steel 1.4404 (AISI 316 L). Version B/A: Without handle and thread. Version B/G: With fixed handle. Acid-resistant A4-quality. Easy to clean. Dimensions almost according to DIN 950. Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/G with handle diameter 200mm SKU: 67099622](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-g-with-handle-diameter-200mm-sku-67099622/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/G with handle diameter 200mm SKU: 67099620](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-g-with-handle-diameter-200mm-sku-67099620/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/G with handle diameter 160mm SKU: 67099616](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-g-with-handle-diameter-160mm-sku-67099616/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/G with handle diameter 140mm SKU: 67099614](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-g-with-handle-diameter-140mm-sku-67099614/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/G with handle diameter 125mm SKU: 67099612](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-g-with-handle-diameter-125mm-sku-67099612/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/G with handle diameter 100mm SKU: 67099610](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-g-with-handle-diameter-100mm-sku-67099610/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/A without handle diameter 200mm SKU: 67099522](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-a-without-handle-diameter-200mm-sku-67099522/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/A without handle diameter 200mm SKU: 67099520](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-a-without-handle-diameter-200mm-sku-67099520/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/A without handle diameter 160mm SKU: 67099516](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-a-without-handle-diameter-160mm-sku-67099516/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/A without handle diameter 140mm SKU: 67099514](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-a-without-handle-diameter-140mm-sku-67099514/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/A without handle diameter 125mm SKU: 67099512](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-a-without-handle-diameter-125mm-sku-67099512/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4308 solid version B/A without handle diameter 100mm SKU: 67099510](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4308-solid-version-b-a-without-handle-diameter-100mm-sku-67099510/): Material: Wheel body: Cast stainless steel 1.4308 (CF-8). Rim turned, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303).Version B/A: Without thread, without cylindrical handle.Version B/G: With revolving cylindrical handle.Easy to clean.Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/G with cylindrical handle diameter 400mm SKU: 67099440](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-g-with-cylindrical-handle-diameter-400mm-sku-67099440/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/G with cylindrical handle diameter 315mm SKU: 67099432](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-g-with-cylindrical-handle-diameter-315mm-sku-67099432/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/G with cylindrical handle diameter 250mm SKU: 67099425](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-g-with-cylindrical-handle-diameter-250mm-sku-67099425/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/G with cylindrical handle diameter 200mm SKU: 67099420](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-g-with-cylindrical-handle-diameter-200mm-sku-67099420/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Spoked handwheel stainless steel 1.4404 (AISI 316L) version B/G with cylindrical handle diameter 160mm SKU: 67099416](https://maedler.in/product/spoked-handwheel-stainless-steel-1-4404-aisi-316l-version-b-g-with-cylindrical-handle-diameter-160mm-sku-67099416/): Material: Wheel body: Stainless steel sheet 1.4404 (AISI 316L). Hub: Welded on, matt blasted. At version B/G: Handle Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4404 (AISI 316L). Hub lengths comply with DIN 950. High mechanical strength, insensitive to blows and impacts. Version B/A: Without thread, without cylindrical handle. Version B/G: With revolving cylindrical handle. Keyway available at extra charge. - [Solid-Disk handwheel 323 version N/G with revolving handle diameter 250mm with bore 22H7 and keyway SKU: 67091701](https://maedler.in/product/solid-disk-handwheel-323-version-n-g-with-revolving-handle-diameter-250mm-with-bore-22h7-and-keyway-sku-67091701/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version B/G with Revolving handle diameter 250mm SKU: 67091700](https://maedler.in/product/solid-disk-handwheel-323-version-b-g-with-revolving-handle-diameter-250mm-sku-67091700/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version N/G with revolving handle diameter 200mm with bore 18H7 and keyway SKU: 67091601](https://maedler.in/product/solid-disk-handwheel-323-version-n-g-with-revolving-handle-diameter-200mm-with-bore-18h7-and-keyway-sku-67091601/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version B/G with Revolving handle diameter 200mm SKU: 67091600](https://maedler.in/product/solid-disk-handwheel-323-version-b-g-with-revolving-handle-diameter-200mm-sku-67091600/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version N/G with revolving handle diameter 160mm with bore 14H7 and keyway SKU: 67091501](https://maedler.in/product/solid-disk-handwheel-323-version-n-g-with-revolving-handle-diameter-160mm-with-bore-14h7-and-keyway-sku-67091501/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version B/G with Revolving handle diameter 160mm SKU: 67091500](https://maedler.in/product/solid-disk-handwheel-323-version-b-g-with-revolving-handle-diameter-160mm-sku-67091500/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version N/G with revolving handle diameter 140mm with bore 14H7 and keyway SKU: 67091401](https://maedler.in/product/solid-disk-handwheel-323-version-n-g-with-revolving-handle-diameter-140mm-with-bore-14h7-and-keyway-sku-67091401/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version B/G with Revolving handle diameter 140mm SKU: 67091400](https://maedler.in/product/solid-disk-handwheel-323-version-b-g-with-revolving-handle-diameter-140mm-sku-67091400/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version N/G with revolving handle diameter 125mm with bore 12H7 and keyway SKU: 67091301](https://maedler.in/product/solid-disk-handwheel-323-version-n-g-with-revolving-handle-diameter-125mm-with-bore-12h7-and-keyway-sku-67091301/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version B/G with Revolving handle diameter 125mm SKU: 67091300](https://maedler.in/product/solid-disk-handwheel-323-version-b-g-with-revolving-handle-diameter-125mm-sku-67091300/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version N/G with revolving handle diameter 100mm with bore 10H7 and keyway SKU: 67091201](https://maedler.in/product/solid-disk-handwheel-323-version-n-g-with-revolving-handle-diameter-100mm-with-bore-10h7-and-keyway-sku-67091201/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version B/G with Revolving handle diameter 100mm SKU: 67091200](https://maedler.in/product/solid-disk-handwheel-323-version-b-g-with-revolving-handle-diameter-100mm-sku-67091200/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version N/G with revolving handle diameter 80mm with bore 10H7 and keyway SKU: 67091101](https://maedler.in/product/solid-disk-handwheel-323-version-n-g-with-revolving-handle-diameter-80mm-with-bore-10h7-and-keyway-sku-67091101/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version B/G with Revolving handle diameter 80mm SKU: 67091100](https://maedler.in/product/solid-disk-handwheel-323-version-b-g-with-revolving-handle-diameter-80mm-sku-67091100/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. - [Solid-Disk handwheel 323 version B/A without handle diameter 250mm SKU: 67090700](https://maedler.in/product/solid-disk-handwheel-323-version-b-a-without-handle-diameter-250mm-sku-67090700/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/A: without keyway. Keyway available at extra charge. - [Solid-Disk handwheel 323 version B/A without handle diameter 200mm SKU: 67090600](https://maedler.in/product/solid-disk-handwheel-323-version-b-a-without-handle-diameter-200mm-sku-67090600/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/A: without keyway. Keyway available at extra charge. - [Solid-Disk handwheel 323 version B/A without handle diameter 160mm SKU: 67090500](https://maedler.in/product/solid-disk-handwheel-323-version-b-a-without-handle-diameter-160mm-sku-67090500/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/A: without keyway. Keyway available at extra charge. - [Solid-Disk handwheel 323 version B/A without handle diameter 140mm SKU: 67090400](https://maedler.in/product/solid-disk-handwheel-323-version-b-a-without-handle-diameter-140mm-sku-67090400/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/A: without keyway. Keyway available at extra charge. - [Solid-Disk handwheel 323 version B/A without handle diameter 125mm SKU: 67090300](https://maedler.in/product/solid-disk-handwheel-323-version-b-a-without-handle-diameter-125mm-sku-67090300/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/A: without keyway. Keyway available at extra charge. - [Solid-Disk handwheel 323 version B/A without handle diameter 100mm SKU: 67090200](https://maedler.in/product/solid-disk-handwheel-323-version-b-a-without-handle-diameter-100mm-sku-67090200/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/A: without keyway. Keyway available at extra charge. - [Solid-Disk handwheel 323 version B/A without handle diameter 80mm SKU: 67090100](https://maedler.in/product/solid-disk-handwheel-323-version-b-a-without-handle-diameter-80mm-sku-67090100/): Material: Aluminium gravity die-cast, plastic coated, black, textured finish. Hub machined. Rim turned on all sides. The rim is machined before coating, thus it is perfectly concentric. Version B/A: without keyway. Keyway available at extra charge. - [Solid-Disk handwheel 326 version N/G with handle diameter 250mm with bore 22H7 and keyway SKU: 67082501](https://maedler.in/product/solid-disk-handwheel-326-version-n-g-with-handle-diameter-250mm-with-bore-22h7-and-keyway-sku-67082501/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version B/G with handle diameter 250mm SKU: 67082500](https://maedler.in/product/solid-disk-handwheel-326-version-b-g-with-handle-diameter-250mm-sku-67082500/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version N/G with handle diameter 200mm with bore 18H7 and keyway SKU: 67082001](https://maedler.in/product/solid-disk-handwheel-326-version-n-g-with-handle-diameter-200mm-with-bore-18h7-and-keyway-sku-67082001/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version B/G with handle diameter 200mm SKU: 67082000](https://maedler.in/product/solid-disk-handwheel-326-version-b-g-with-handle-diameter-200mm-sku-67082000/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version N/G with handle diameter 160mm with bore 14H7 and keyway SKU: 67081601](https://maedler.in/product/solid-disk-handwheel-326-version-n-g-with-handle-diameter-160mm-with-bore-14h7-and-keyway-sku-67081601/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version B/G with handle diameter 160mm SKU: 67081600](https://maedler.in/product/solid-disk-handwheel-326-version-b-g-with-handle-diameter-160mm-sku-67081600/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version N/G with handle diameter 140mm with bore 14H7 and keyway SKU: 67081401](https://maedler.in/product/solid-disk-handwheel-326-version-n-g-with-handle-diameter-140mm-with-bore-14h7-and-keyway-sku-67081401/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version B/G with handle diameter 140mm SKU: 67081400](https://maedler.in/product/solid-disk-handwheel-326-version-b-g-with-handle-diameter-140mm-sku-67081400/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version N/G with handle diameter 125mm with bore 12H7 and keyway SKU: 67081201](https://maedler.in/product/solid-disk-handwheel-326-version-n-g-with-handle-diameter-125mm-with-bore-12h7-and-keyway-sku-67081201/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version B/G with handle diameter 125mm SKU: 67081200](https://maedler.in/product/solid-disk-handwheel-326-version-b-g-with-handle-diameter-125mm-sku-67081200/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version N/G with handle diameter 100mm with bore 10H7 and keyway SKU: 67081001](https://maedler.in/product/solid-disk-handwheel-326-version-n-g-with-handle-diameter-100mm-with-bore-10h7-and-keyway-sku-67081001/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version B/G with handle diameter 100mm SKU: 67081000](https://maedler.in/product/solid-disk-handwheel-326-version-b-g-with-handle-diameter-100mm-sku-67081000/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Solid-Disk handwheel 326 version N/A without handle diameter 200mm with bore 18H7 and keyway SKU: 67080701](https://maedler.in/product/solid-disk-handwheel-326-version-n-a-without-handle-diameter-200mm-with-bore-18h7-and-keyway-sku-67080701/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version B/A without handle diameter 250mm SKU: 67080700](https://maedler.in/product/solid-disk-handwheel-326-version-b-a-without-handle-diameter-250mm-sku-67080700/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version N/A without handle diameter 200mm with bore 18H7 and keyway SKU: 67080601](https://maedler.in/product/solid-disk-handwheel-326-version-n-a-without-handle-diameter-200mm-with-bore-18h7-and-keyway-sku-67080601/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version B/A without handle diameter 200mm SKU: 67080600](https://maedler.in/product/solid-disk-handwheel-326-version-b-a-without-handle-diameter-200mm-sku-67080600/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version N/A without handle diameter 160mm with bore 14H7 and keyway SKU: 67080501](https://maedler.in/product/solid-disk-handwheel-326-version-n-a-without-handle-diameter-160mm-with-bore-14h7-and-keyway-sku-67080501/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version B/A without handle diameter 160mm SKU: 67080500](https://maedler.in/product/solid-disk-handwheel-326-version-b-a-without-handle-diameter-160mm-sku-67080500/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version N/A without handle diameter 140mm with bore 14H7 and keyway SKU: 67080401](https://maedler.in/product/solid-disk-handwheel-326-version-n-a-without-handle-diameter-140mm-with-bore-14h7-and-keyway-sku-67080401/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version B/A without handle diameter 140mm SKU: 67080400](https://maedler.in/product/solid-disk-handwheel-326-version-b-a-without-handle-diameter-140mm-sku-67080400/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version N/A without handle diameter 125mm with bore 12H7 and keyway SKU: 67080301](https://maedler.in/product/solid-disk-handwheel-326-version-n-a-without-handle-diameter-125mm-with-bore-12h7-and-keyway-sku-67080301/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version B/A without handle diameter 125mm SKU: 67080300](https://maedler.in/product/solid-disk-handwheel-326-version-b-a-without-handle-diameter-125mm-sku-67080300/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version N/A without handle diameter 100mm with bore 10H7 and keyway SKU: 67080201](https://maedler.in/product/solid-disk-handwheel-326-version-n-a-without-handle-diameter-100mm-with-bore-10h7-and-keyway-sku-67080201/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version B/A without handle diameter 100mm SKU: 67080200](https://maedler.in/product/solid-disk-handwheel-326-version-b-a-without-handle-diameter-100mm-sku-67080200/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version N/A without handle diameter 80mm with bore 10H7 and keyway SKU: 67080101](https://maedler.in/product/solid-disk-handwheel-326-version-n-a-without-handle-diameter-80mm-with-bore-10h7-and-keyway-sku-67080101/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Solid-Disk handwheel 326 version B/A without handle diameter 80mm SKU: 67080100](https://maedler.in/product/solid-disk-handwheel-326-version-b-a-without-handle-diameter-80mm-sku-67080100/): Material: Aluminium, gravity die-cast. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/A: Without keyway, without handle. Version N/A: With keyway DIN 6885-1, without handle. - [Spoked handwheel 320 version N/G with handle diameter 250mm with bore 22H7 and keyway SKU: 67072501](https://maedler.in/product/spoked-handwheel-320-version-n-g-with-handle-diameter-250mm-with-bore-22h7-and-keyway-sku-67072501/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Spoked handwheel 320 version B/G with handle diameter 250mm SKU: 67072500](https://maedler.in/product/spoked-handwheel-320-version-b-g-with-handle-diameter-250mm-sku-67072500/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Spoked handwheel 320 version N/G with handle diameter 200mm with bore 18H7 and keyway SKU: 67072001](https://maedler.in/product/spoked-handwheel-320-version-n-g-with-handle-diameter-200mm-with-bore-18h7-and-keyway-sku-67072001/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Spoked handwheel 320 version B/G with handle diameter 200mm SKU: 67072000](https://maedler.in/product/spoked-handwheel-320-version-b-g-with-handle-diameter-200mm-sku-67072000/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Spoked handwheel 320 version N/G with handle diameter 160mm with bore 14H7 and keyway SKU: 67071601](https://maedler.in/product/spoked-handwheel-320-version-n-g-with-handle-diameter-160mm-with-bore-14h7-and-keyway-sku-67071601/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Spoked handwheel 320 version B/G with handle diameter 160mm SKU: 67071600](https://maedler.in/product/spoked-handwheel-320-version-b-g-with-handle-diameter-160mm-sku-67071600/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Spoked handwheel 320 version N/G with handle diameter 140mm with bore 14H7 and keyway SKU: 67071401](https://maedler.in/product/spoked-handwheel-320-version-n-g-with-handle-diameter-140mm-with-bore-14h7-and-keyway-sku-67071401/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Spoked handwheel 320 version B/G with handle diameter 140mm SKU: 67071400](https://maedler.in/product/spoked-handwheel-320-version-b-g-with-handle-diameter-140mm-sku-67071400/): Material: Aluminium, gravity die-cast. Revolving cylindrical handle made from plastic with threaded steel stud and Allen screw. Hub machined, rim of wheel turned and polished all over. Hub length and bore diameter according to DIN 950. Version B/G: Without keyway, with handle. Version N/G: With keyway DIN6885-1, with handle. - [Polyurethane timing belt T5 width 25mm Lw 550mm 110 teeth 25 T5/550 SKU: 16283800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-550mm-110-teeth-25-t5-550-sku-16283800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 545mm 109 teeth 25 T5/545 SKU: 16283700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-545mm-109-teeth-25-t5-545-sku-16283700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 525mm 105 teeth 25 T5/525 SKU: 16283600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-525mm-105-teeth-25-t5-525-sku-16283600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 510mm 102 teeth 25 T5/510 SKU: 16283500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-510mm-102-teeth-25-t5-510-sku-16283500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 500mm 100 teeth 25 T5/500 SKU: 16283400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-500mm-100-teeth-25-t5-500-sku-16283400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 480mm 96 teeth 25 T5/480 SKU: 16283300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-480mm-96-teeth-25-t5-480-sku-16283300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 475mm 95 teeth 25 T5/475 SKU: 16283200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-475mm-95-teeth-25-t5-475-sku-16283200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 465mm 93 teeth 25 T5/465 SKU: 16283100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-465mm-93-teeth-25-t5-465-sku-16283100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 455mm 91 teeth 25 T5/455 SKU: 16283000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-455mm-91-teeth-25-t5-455-sku-16283000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 450mm 90 teeth 25 T5/450 SKU: 16282900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-450mm-90-teeth-25-t5-450-sku-16282900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 425mm 85 teeth 25 T5/425 SKU: 16282800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-425mm-85-teeth-25-t5-425-sku-16282800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 420mm 84 teeth 25 T5/420 SKU: 16282700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-420mm-84-teeth-25-t5-420-sku-16282700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 410mm 82 teeth 25 T5/410 SKU: 16282600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-410mm-82-teeth-25-t5-410-sku-16282600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 400mm 80 teeth 25 T5/400 SKU: 16282500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-400mm-80-teeth-25-t5-400-sku-16282500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 390mm 78 teeth 25 T5/390 SKU: 16282400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-390mm-78-teeth-25-t5-390-sku-16282400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 375mm 75 teeth 25 T5/375 SKU: 16282300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-375mm-75-teeth-25-t5-375-sku-16282300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 365mm 73 teeth 25 T5/365 SKU: 16282200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-365mm-73-teeth-25-t5-365-sku-16282200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 355mm 71 teeth 25 T5/355 SKU: 16282100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-355mm-71-teeth-25-t5-355-sku-16282100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 350mm 70 teeth 25 T5/350 SKU: 16282000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-350mm-70-teeth-25-t5-350-sku-16282000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 340mm 68 teeth 25 T5/340 SKU: 16281900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-340mm-68-teeth-25-t5-340-sku-16281900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 330mm 66 teeth 25 T5/330 SKU: 16281800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-330mm-66-teeth-25-t5-330-sku-16281800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 325mm 65 teeth 25 T5/325 SKU: 16281700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-325mm-65-teeth-25-t5-325-sku-16281700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 305mm 61 teeth 25 T5/305 SKU: 16281600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-305mm-61-teeth-25-t5-305-sku-16281600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 300mm 60 teeth 25 T5/300 SKU: 16281500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-300mm-60-teeth-25-t5-300-sku-16281500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 295mm 59 teeth 25 T5/295 SKU: 16281400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-295mm-59-teeth-25-t5-295-sku-16281400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 280mm 56 teeth 25 T5/280 SKU: 16281300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-280mm-56-teeth-25-t5-280-sku-16281300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 275mm 55 teeth 25 T5/275 SKU: 16281200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-275mm-55-teeth-25-t5-275-sku-16281200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 270mm 54 teeth 25 T5/270 SKU: 16281100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-270mm-54-teeth-25-t5-270-sku-16281100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 260mm 52 teeth 25 T5/260 SKU: 16281000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-260mm-52-teeth-25-t5-260-sku-16281000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 255mm 51 teeth 25 T5/255 SKU: 16280900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-255mm-51-teeth-25-t5-255-sku-16280900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 250mm 50 teeth 25 T5/250 SKU: 16280800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-250mm-50-teeth-25-t5-250-sku-16280800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 245mm 49 teeth 25 T5/245 SKU: 16280700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-245mm-49-teeth-25-t5-245-sku-16280700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 225mm 45 teeth 25 T5/225 SKU: 16280600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-225mm-45-teeth-25-t5-225-sku-16280600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 220mm 44 teeth 25 T5/220 SKU: 16280500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-220mm-44-teeth-25-t5-220-sku-16280500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 215mm 43 teeth 25 T5/215 SKU: 16280400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-215mm-43-teeth-25-t5-215-sku-16280400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 200mm 40 teeth 25 T5/200 SKU: 16280300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-200mm-40-teeth-25-t5-200-sku-16280300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 185mm 37 teeth 25 T5/185 SKU: 16280200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-185mm-37-teeth-25-t5-185-sku-16280200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 165mm 33 teeth 25 T5/165 SKU: 16280100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-165mm-33-teeth-25-t5-165-sku-16280100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm 25T5 open length PAZ = Polyamide fabric on tooth side SKU: 16280001](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-25t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16280001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 25mm 25 T5 open length SKU: 16280000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-25-t5-open-length-sku-16280000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T5 belt width 16mm SKU: 16279900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-16mm-sku-16279900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Timing belt pulley steel T5 112 teeth belt width 25mm for taper bush 2012 SKU: 16277494](https://maedler.in/product/timing-belt-pulley-steel-t5-112-teeth-belt-width-25mm-for-taper-bush-2012-sku-16277494/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 96 teeth belt width 25mm for taper bush 2012 SKU: 16277492](https://maedler.in/product/timing-belt-pulley-steel-t5-96-teeth-belt-width-25mm-for-taper-bush-2012-sku-16277492/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 90 teeth belt width 25mm for taper bush 1610 SKU: 16277490](https://maedler.in/product/timing-belt-pulley-steel-t5-90-teeth-belt-width-25mm-for-taper-bush-1610-sku-16277490/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 84 teeth belt width 25mm for taper bush 1610 SKU: 16277484](https://maedler.in/product/timing-belt-pulley-steel-t5-84-teeth-belt-width-25mm-for-taper-bush-1610-sku-16277484/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 80 teeth belt width 25mm for taper bush 1610 SKU: 16277480](https://maedler.in/product/timing-belt-pulley-steel-t5-80-teeth-belt-width-25mm-for-taper-bush-1610-sku-16277480/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 72 teeth belt width 25mm for taper bush 1610 SKU: 16277472](https://maedler.in/product/timing-belt-pulley-steel-t5-72-teeth-belt-width-25mm-for-taper-bush-1610-sku-16277472/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 64 teeth belt width 25mm for taper bush 1210 SKU: 16277464](https://maedler.in/product/timing-belt-pulley-steel-t5-64-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277464/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 60 teeth belt width 25mm for taper bush 1210 SKU: 16277460](https://maedler.in/product/timing-belt-pulley-steel-t5-60-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277460/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 56 teeth belt width 25mm for taper bush 1210 SKU: 16277456](https://maedler.in/product/timing-belt-pulley-steel-t5-56-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277456/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 48 teeth belt width 25mm for taper bush 1210 SKU: 16277448](https://maedler.in/product/timing-belt-pulley-steel-t5-48-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277448/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 44 teeth belt width 25mm for taper bush 1210 SKU: 16277444](https://maedler.in/product/timing-belt-pulley-steel-t5-44-teeth-belt-width-25mm-for-taper-bush-1210-sku-16277444/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 40 teeth belt width 25mm for taper bush 1108 SKU: 16277440](https://maedler.in/product/timing-belt-pulley-steel-t5-40-teeth-belt-width-25mm-for-taper-bush-1108-sku-16277440/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 38 teeth belt width 25mm for taper bush 1108 SKU: 16277438](https://maedler.in/product/timing-belt-pulley-steel-t5-38-teeth-belt-width-25mm-for-taper-bush-1108-sku-16277438/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 36 teeth belt width 25mm for taper bush 1108 SKU: 16277436](https://maedler.in/product/timing-belt-pulley-steel-t5-36-teeth-belt-width-25mm-for-taper-bush-1108-sku-16277436/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 34 teeth belt width 25mm for taper bush 1008 SKU: 16277434](https://maedler.in/product/timing-belt-pulley-steel-t5-34-teeth-belt-width-25mm-for-taper-bush-1008-sku-16277434/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 112 teeth belt width 16mm for taper bush 2012 SKU: 16277394](https://maedler.in/product/timing-belt-pulley-steel-t5-112-teeth-belt-width-16mm-for-taper-bush-2012-sku-16277394/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 96 teeth belt width 16mm for taper bush 2012 SKU: 16277392](https://maedler.in/product/timing-belt-pulley-steel-t5-96-teeth-belt-width-16mm-for-taper-bush-2012-sku-16277392/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 90 teeth belt width 16mm for taper bush 1610 SKU: 16277390](https://maedler.in/product/timing-belt-pulley-steel-t5-90-teeth-belt-width-16mm-for-taper-bush-1610-sku-16277390/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 84 teeth belt width 16mm for taper bush 1610 SKU: 16277384](https://maedler.in/product/timing-belt-pulley-steel-t5-84-teeth-belt-width-16mm-for-taper-bush-1610-sku-16277384/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 80 teeth belt width 16mm for taper bush 1610 SKU: 16277380](https://maedler.in/product/timing-belt-pulley-steel-t5-80-teeth-belt-width-16mm-for-taper-bush-1610-sku-16277380/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 72 teeth belt width 16mm for taper bush 1610 SKU: 16277372](https://maedler.in/product/timing-belt-pulley-steel-t5-72-teeth-belt-width-16mm-for-taper-bush-1610-sku-16277372/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 64 teeth belt width 16mm for taper bush 1210 SKU: 16277364](https://maedler.in/product/timing-belt-pulley-steel-t5-64-teeth-belt-width-16mm-for-taper-bush-1210-sku-16277364/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 60 teeth belt width 16mm for taper bush 1210 SKU: 16277360](https://maedler.in/product/timing-belt-pulley-steel-t5-60-teeth-belt-width-16mm-for-taper-bush-1210-sku-16277360/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 56 teeth belt width 16mm for taper bush 1210 SKU: 16277356](https://maedler.in/product/timing-belt-pulley-steel-t5-56-teeth-belt-width-16mm-for-taper-bush-1210-sku-16277356/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 48 teeth belt width 16mm for taper bush 1210 SKU: 16277348](https://maedler.in/product/timing-belt-pulley-steel-t5-48-teeth-belt-width-16mm-for-taper-bush-1210-sku-16277348/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 44 teeth belt width 16mm for taper bush 1108 SKU: 16277344](https://maedler.in/product/timing-belt-pulley-steel-t5-44-teeth-belt-width-16mm-for-taper-bush-1108-sku-16277344/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 40 teeth belt width 16mm for taper bush 1108 SKU: 16277340](https://maedler.in/product/timing-belt-pulley-steel-t5-40-teeth-belt-width-16mm-for-taper-bush-1108-sku-16277340/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 38 teeth belt width 16mm for taper bush 1108 SKU: 16277338](https://maedler.in/product/timing-belt-pulley-steel-t5-38-teeth-belt-width-16mm-for-taper-bush-1108-sku-16277338/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 36 teeth belt width 16mm for taper bush 1108 SKU: 16277336](https://maedler.in/product/timing-belt-pulley-steel-t5-36-teeth-belt-width-16mm-for-taper-bush-1108-sku-16277336/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel T5 34 teeth belt width 16mm for taper bush 1008 SKU: 16277334](https://maedler.in/product/timing-belt-pulley-steel-t5-34-teeth-belt-width-16mm-for-taper-bush-1008-sku-16277334/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt T5 width 16mm Lw 1440mm 288 teeth 16 T5/1440 SKU: 16276400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1440mm-288-teeth-16-t5-1440-sku-16276400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1380mm 276 teeth 16 T5/1380 SKU: 16276300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1380mm-276-teeth-16-t5-1380-sku-16276300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1215mm 243 teeth 16 T5/1215 SKU: 16276200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1215mm-243-teeth-16-t5-1215-sku-16276200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1100mm 220 teeth 16 T5/1100 SKU: 16276100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1100mm-220-teeth-16-t5-1100-sku-16276100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1075mm 215 teeth 16 T5/1075 SKU: 16276000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1075mm-215-teeth-16-t5-1075-sku-16276000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 1000mm 200 teeth 16 T5/1000 SKU: 16275900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-1000mm-200-teeth-16-t5-1000-sku-16275900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 990mm 198 teeth 16 T5/990 SKU: 16275800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-990mm-198-teeth-16-t5-990-sku-16275800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 900mm 180 teeth 16 T5/900 SKU: 16275700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-900mm-180-teeth-16-t5-900-sku-16275700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 850mm 170 teeth 16 T5/850 SKU: 16275600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-850mm-170-teeth-16-t5-850-sku-16275600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 840mm 168 teeth 16 T5/840 SKU: 16275500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-840mm-168-teeth-16-t5-840-sku-16275500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 815mm 163 teeth 16 T5/815 SKU: 16275400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-815mm-163-teeth-16-t5-815-sku-16275400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 780mm 156 teeth 16 T5/780 SKU: 16275300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-780mm-156-teeth-16-t5-780-sku-16275300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 750mm 150 teeth 16 T5/750 SKU: 16275200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-750mm-150-teeth-16-t5-750-sku-16275200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 720mm 144 teeth 16 T5/720 SKU: 16275100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-720mm-144-teeth-16-t5-720-sku-16275100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 700mm 140 teeth 16 T5/700 SKU: 16275000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-700mm-140-teeth-16-t5-700-sku-16275000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 695mm 139 teeth 16 T5/695 SKU: 16274900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-695mm-139-teeth-16-t5-695-sku-16274900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 690mm 138 teeth 16 T5/690 SKU: 16274800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-690mm-138-teeth-16-t5-690-sku-16274800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 660mm 132 teeth 16 T5/660 SKU: 16274700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-660mm-132-teeth-16-t5-660-sku-16274700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 650mm 130 teeth 16 T5/650 SKU: 16274600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-650mm-130-teeth-16-t5-650-sku-16274600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 640mm 128 teeth 16 T5/640 SKU: 16274500](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-640mm-128-teeth-16-t5-640-sku-16274500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 630mm 126 teeth 16 T5/630 SKU: 16274400](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-630mm-126-teeth-16-t5-630-sku-16274400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 620mm 124 teeth 16 T5/620 SKU: 16274300](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-620mm-124-teeth-16-t5-620-sku-16274300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 610mm 122 teeth 16 T5/610 SKU: 16274200](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-610mm-122-teeth-16-t5-610-sku-16274200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 600mm 120 teeth 16 T5/600 SKU: 16274100](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-600mm-120-teeth-16-t5-600-sku-16274100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 575mm 115 teeth 16 T5/575 SKU: 16274000](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-575mm-115-teeth-16-t5-575-sku-16274000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 560mm 112 teeth 16 T5/560 SKU: 16273900](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-560mm-112-teeth-16-t5-560-sku-16273900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 550mm 110 teeth 16 T5/550 SKU: 16273800](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-550mm-110-teeth-16-t5-550-sku-16273800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 545mm 109 teeth 16 T5/545 SKU: 16273700](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-545mm-109-teeth-16-t5-545-sku-16273700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 16mm Lw 525mm 105 teeth 16 T5/525 SKU: 16273600](https://maedler.in/product/polyurethane-timing-belt-t5-width-16mm-lw-525mm-105-teeth-16-t5-525-sku-16273600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Clamping bolt shape A M10 SKU: 67600010](https://maedler.in/product/clamping-bolt-shape-a-m10-sku-67600010/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Clamping bolt shape A M 8 SKU: 67600008](https://maedler.in/product/clamping-bolt-shape-a-m-8-sku-67600008/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Clamping bolt shape A M 6 SKU: 67600006](https://maedler.in/product/clamping-bolt-shape-a-m-6-sku-67600006/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Clamping bolt shape A M 5 SKU: 67600005](https://maedler.in/product/clamping-bolt-shape-a-m-5-sku-67600005/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Clamping bolt shape A M 4 SKU: 67600004](https://maedler.in/product/clamping-bolt-shape-a-m-4-sku-67600004/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Spoked handwheel 522 made of plastic with revolving cylindrical handle diameter 250mm SKU: 67572500](https://maedler.in/product/spoked-handwheel-522-made-of-plastic-with-revolving-cylindrical-handle-diameter-250mm-sku-67572500/): Material: Plastic Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Brass threaded bush for screwing in the cylindrical grip. Revolving cylindrical handle: Plastic, black. The styling of the handwheel will meet any demand for modern design, and it also takes ergonomical aspects into consideration. A perfect and flawless surface and excellent concentricity of the wheel rim are ensured. Keyway available at extra charge. - [Spoked handwheel 522 made of plastic with revolving cylindrical handle diameter 200mm SKU: 67572000](https://maedler.in/product/spoked-handwheel-522-made-of-plastic-with-revolving-cylindrical-handle-diameter-200mm-sku-67572000/): Material: Plastic Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Brass threaded bush for screwing in the cylindrical grip. Revolving cylindrical handle: Plastic, black. The styling of the handwheel will meet any demand for modern design, and it also takes ergonomical aspects into consideration. A perfect and flawless surface and excellent concentricity of the wheel rim are ensured. Keyway available at extra charge. - [Spoked handwheel 522 made of plastic with revolving cylindrical handle diameter 160mm SKU: 67571600](https://maedler.in/product/spoked-handwheel-522-made-of-plastic-with-revolving-cylindrical-handle-diameter-160mm-sku-67571600/): Material: Plastic Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Brass threaded bush for screwing in the cylindrical grip. Revolving cylindrical handle: Plastic, black. The styling of the handwheel will meet any demand for modern design, and it also takes ergonomical aspects into consideration. A perfect and flawless surface and excellent concentricity of the wheel rim are ensured. Keyway available at extra charge. - [Spoked handwheel 522 made of plastic with revolving cylindrical handle diameter 125mm SKU: 67571200](https://maedler.in/product/spoked-handwheel-522-made-of-plastic-with-revolving-cylindrical-handle-diameter-125mm-sku-67571200/): Material: Plastic Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Brass threaded bush for screwing in the cylindrical grip. Revolving cylindrical handle: Plastic, black. The styling of the handwheel will meet any demand for modern design, and it also takes ergonomical aspects into consideration. A perfect and flawless surface and excellent concentricity of the wheel rim are ensured. Keyway available at extra charge. - [Spoked handwheel 522 made of plastic with revolving cylindrical handle diameter 100mm SKU: 67571000](https://maedler.in/product/spoked-handwheel-522-made-of-plastic-with-revolving-cylindrical-handle-diameter-100mm-sku-67571000/): Material: Plastic Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Brass threaded bush for screwing in the cylindrical grip. Revolving cylindrical handle: Plastic, black. The styling of the handwheel will meet any demand for modern design, and it also takes ergonomical aspects into consideration. A perfect and flawless surface and excellent concentricity of the wheel rim are ensured. Keyway available at extra charge. - [Spoked handwheel 522 made of plastic with revolving cylindrical handle diameter 80mm SKU: 67570800](https://maedler.in/product/spoked-handwheel-522-made-of-plastic-with-revolving-cylindrical-handle-diameter-80mm-sku-67570800/): Material: Plastic Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Brass threaded bush for screwing in the cylindrical grip. Revolving cylindrical handle: Plastic, black. The styling of the handwheel will meet any demand for modern design, and it also takes ergonomical aspects into consideration. A perfect and flawless surface and excellent concentricity of the wheel rim are ensured. Keyway available at extra charge. - [Retractable handwheel 5223 material plastic version N/G diameter 250mm with bore 20H7 and keyway SKU: 67552501](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-n-g-diameter-250mm-with-bore-20h7-and-keyway-sku-67552501/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel burnished. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version B/G diameter 250 mm SKU: 67552500](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-b-g-diameter-250-mm-sku-67552500/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version B/G: Without keyway. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version N/G diameter 200mm with bore 20H7 and keyway SKU: 67552001](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-n-g-diameter-200mm-with-bore-20h7-and-keyway-sku-67552001/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version B/G: Without keyway. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version B/G diameter 200 mm SKU: 67552000](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-b-g-diameter-200-mm-sku-67552000/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version B/G: Without keyway. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version N/G diameter 160mm with bore 14H7 and keyway SKU: 67551601](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-n-g-diameter-160mm-with-bore-14h7-and-keyway-sku-67551601/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel burnished. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version B/G diameter 160 mm SKU: 67551600](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-b-g-diameter-160-mm-sku-67551600/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version B/G: Without keyway. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version N/G diameter 125mm with bore 12H7 and keyway SKU: 67551201](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-n-g-diameter-125mm-with-bore-12h7-and-keyway-sku-67551201/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version B/G: Without keyway. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version B/G diameter 125 mm SKU: 67551200](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-b-g-diameter-125-mm-sku-67551200/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version B/G: Without keyway. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version N/G diameter 100mm with bore 12H7 and keyway SKU: 67551001](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-n-g-diameter-100mm-with-bore-12h7-and-keyway-sku-67551001/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel burnished. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version B/G diameter 100 mm SKU: 67551000](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-b-g-diameter-100-mm-sku-67551000/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version B/G: Without keyway. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version N/G diameter 80mm with bore 10H7 and keyway SKU: 67550801](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-n-g-diameter-80mm-with-bore-10h7-and-keyway-sku-67550801/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version B/G: Without keyway. Version N/G: With keyway to DIN 6885-1. - [Retractable handwheel 5223 material plastic version B/G diameter 80 mm SKU: 67550800](https://maedler.in/product/retractable-handwheel-5223-material-plastic-version-b-g-diameter-80-mm-sku-67550800/): Material: Thermoplast reinforced, impact-proof, black, matt finish. Hub bush: Steel, black oxide finish. Folding system: Steel burnished. Retractable handle: Plastic black. Use: When the handle must not stick out. The handle is firmly locked in a slim taper in the operating position. To retract the handle, it is pulled out of its taper seat and then tilted. A compression spring locks the handle in both end positions. When folding the handle away, it automatically locks in position. Version B/G: Without keyway. Version N/G: With keyway to DIN 6885-1. - [Handwheel 527.1 made of plastic with steel hub with peripheral grooves diameter 80mm bore 16 H7 SKU: 67508301](https://maedler.in/product/handwheel-527-1-made-of-plastic-with-steel-hub-with-peripheral-grooves-diameter-80mm-bore-16-h7-sku-67508301/): Material: Plastic Thermoplast (PA) reinforced, black, gloss finish. Hub: Steel, burnished. With steel hubs of large dimension. For applications requiring a large contact surface or a large diameter bore. Temperature resitant up to +120°C. Keyway available at extra charge. - [Handwheel 527.1 made of plastic with steel hub with peripheral grooves diameter 70mm bore 14 H7 SKU: 67507001](https://maedler.in/product/handwheel-527-1-made-of-plastic-with-steel-hub-with-peripheral-grooves-diameter-70mm-bore-14-h7-sku-67507001/): Material: Plastic Thermoplast (PA) reinforced, black, gloss finish. Hub: Steel, burnished. With steel hubs of large dimension. For applications requiring a large contact surface or a large diameter bore. Temperature resitant up to +120°C. Keyway available at extra charge. - [Handwheel 527.1 made of plastic with steel hub with peripheral grooves diameter 60mm bore 12 H7 SKU: 67506201](https://maedler.in/product/handwheel-527-1-made-of-plastic-with-steel-hub-with-peripheral-grooves-diameter-60mm-bore-12-h7-sku-67506201/): Material: Plastic Thermoplast (PA) reinforced, black, gloss finish. Hub: Steel, burnished. With steel hubs of large dimension. For applications requiring a large contact surface or a large diameter bore. Temperature resitant up to +120°C. Keyway available at extra charge. - [Handwheel 527.1 made of plastic with steel hub with peripheral grooves diameter 50mm bore 10 H7 SKU: 67505201](https://maedler.in/product/handwheel-527-1-made-of-plastic-with-steel-hub-with-peripheral-grooves-diameter-50mm-bore-10-h7-sku-67505201/): Material: Plastic Thermoplast (PA) reinforced, black, gloss finish. Hub: Steel, burnished. With steel hubs of large dimension. For applications requiring a large contact surface or a large diameter bore. Temperature resitant up to +120°C. Keyway available at extra charge. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/G diameter 400mm square bore 24mm with thread hole for machine handle SKU: 67344024](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-g-diameter-400mm-square-bore-24mm-with-thread-hole-for-machine-handle-sku-67344024/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/G diameter 400mm square bore 32mm with thread hole for machine handle SKU: 67344000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-g-diameter-400mm-square-bore-32mm-with-thread-hole-for-machine-handle-sku-67344000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/G diameter 315mm square bore 19mm with thread hole for machine handle SKU: 67343119](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-g-diameter-315mm-square-bore-19mm-with-thread-hole-for-machine-handle-sku-67343119/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/G diameter 315mm square bore 27mm with thread hole for machine handle SKU: 67343100](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-g-diameter-315mm-square-bore-27mm-with-thread-hole-for-machine-handle-sku-67343100/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/G diameter 250mm square bore 17mm with thread hole for machine handle SKU: 67342517](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-g-diameter-250mm-square-bore-17mm-with-thread-hole-for-machine-handle-sku-67342517/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/G diameter 250mm square bore 22mm with thread hole for machine handle SKU: 67342500](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-g-diameter-250mm-square-bore-22mm-with-thread-hole-for-machine-handle-sku-67342500/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/G diameter 225mm square bore 19mm with thread hole for machine handle SKU: 67342200](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-g-diameter-225mm-square-bore-19mm-with-thread-hole-for-machine-handle-sku-67342200/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 200mm square bore 14mm with thread hole for machine handle SKU: 67342014](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-200mm-square-bore-14mm-with-thread-hole-for-machine-handle-sku-67342014/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 200mm square bore 17mm with thread hole for machine handle SKU: 67342000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-200mm-square-bore-17mm-with-thread-hole-for-machine-handle-sku-67342000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 180mm square bore 14mm with thread hole for machine handle SKU: 67341800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-180mm-square-bore-14mm-with-thread-hole-for-machine-handle-sku-67341800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 160mm square bore 12mm with thread hole for machine handle SKU: 67341612](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-160mm-square-bore-12mm-with-thread-hole-for-machine-handle-sku-67341612/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 160mm square bore 14mm with thread hole for machine handle SKU: 67341600](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-160mm-square-bore-14mm-with-thread-hole-for-machine-handle-sku-67341600/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 140mm square bore 12mm with thread hole for machine handle SKU: 67341400](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-140mm-square-bore-12mm-with-thread-hole-for-machine-handle-sku-67341400/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 125mm square bore 11mm with thread hole for machine handle SKU: 67341200](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-125mm-square-bore-11mm-with-thread-hole-for-machine-handle-sku-67341200/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 100mm square bore 9mm with thread hole for machine handle SKU: 67341009](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-100mm-square-bore-9mm-with-thread-hole-for-machine-handle-sku-67341009/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 100mm square bore 10mm with thread hole for machine handle SKU: 67341000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-100mm-square-bore-10mm-with-thread-hole-for-machine-handle-sku-67341000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/G diameter 80mm square bore 9mm with thread hole for machine handle SKU: 67340800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-g-diameter-80mm-square-bore-9mm-with-thread-hole-for-machine-handle-sku-67340800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/A diameter 400mm square bore 24mm SKU: 67324024](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-a-diameter-400mm-square-bore-24mm-sku-67324024/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/A diameter 400mm square bore 32mm SKU: 67324000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-a-diameter-400mm-square-bore-32mm-sku-67324000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/A diameter 315mm square bore 19mm SKU: 67323119](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-a-diameter-315mm-square-bore-19mm-sku-67323119/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/A diameter 315mm square bore 27mm SKU: 67323100](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-a-diameter-315mm-square-bore-27mm-sku-67323100/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/A diameter 250mm square bore 17mm SKU: 67322517](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-a-diameter-250mm-square-bore-17mm-sku-67322517/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/A diameter 250mm square bore 22mm SKU: 67322500](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-a-diameter-250mm-square-bore-22mm-sku-67322500/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version V/A diameter 225mm square bore 19mm SKU: 67322200](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-v-a-diameter-225mm-square-bore-19mm-sku-67322200/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 200mm square bore 14mm SKU: 67322014](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-200mm-square-bore-14mm-sku-67322014/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 200mm square bore 17mm SKU: 67322000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-200mm-square-bore-17mm-sku-67322000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 180mm square bore 14mm SKU: 67321800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-180mm-square-bore-14mm-sku-67321800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 160mm square bore 12mm SKU: 67321612](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-160mm-square-bore-12mm-sku-67321612/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 160mm square bore 14mm SKU: 67321600](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-160mm-square-bore-14mm-sku-67321600/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 140mm square bore 12mm SKU: 67321400](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-140mm-square-bore-12mm-sku-67321400/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 125mm square bore 11mm SKU: 67321200](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-125mm-square-bore-11mm-sku-67321200/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 100mm square bore 9mm SKU: 67321009](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-100mm-square-bore-9mm-sku-67321009/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 100mm square bore 10mm SKU: 67321000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-100mm-square-bore-10mm-sku-67321000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version V/A diameter 80mm square bore 9mm SKU: 67320800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-v-a-diameter-80mm-square-bore-9mm-sku-67320800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surface machined, square hole reamed true to gauge. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version V/A: Without thread, without handle. Version V/G: With threaded lug for handle. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/G diameter 400mm with bore 30H7 and keyway with thread hole for machine handle SKU: 67244001](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-g-diameter-400mm-with-bore-30h7-and-keyway-with-thread-hole-for-machine-handle-sku-67244001/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/G diameter 400mm with thread hole for machine handle SKU: 67244000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-g-diameter-400mm-with-thread-hole-for-machine-handle-sku-67244000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/G diameter 360mm with bore 28H7 and keyway with thread hole for machine handle SKU: 67243601](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-g-diameter-360mm-with-bore-28h7-and-keyway-with-thread-hole-for-machine-handle-sku-67243601/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/G diameter 360mm with thread hole for machine handle SKU: 67243600](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-g-diameter-360mm-with-thread-hole-for-machine-handle-sku-67243600/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/G diameter 315mm with bore 26H7 and keyway with thread hole for machine handle SKU: 67243101](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-g-diameter-315mm-with-bore-26h7-and-keyway-with-thread-hole-for-machine-handle-sku-67243101/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/G diameter 315mm with thread hole for machine handle SKU: 67243100](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-g-diameter-315mm-with-thread-hole-for-machine-handle-sku-67243100/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/G diameter 280mm with bore 24H7 and keyway with thread hole for machine handle SKU: 67242801](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-g-diameter-280mm-with-bore-24h7-and-keyway-with-thread-hole-for-machine-handle-sku-67242801/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/G diameter 280mm with thread hole for machine handle SKU: 67242800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-g-diameter-280mm-with-thread-hole-for-machine-handle-sku-67242800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/G diameter 250mm with bore 22H7 and keyway with thread hole for machine handle SKU: 67242501](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-g-diameter-250mm-with-bore-22h7-and-keyway-with-thread-hole-for-machine-handle-sku-67242501/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/G diameter 250mm with thread hole for machine handle SKU: 67242500](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-g-diameter-250mm-with-thread-hole-for-machine-handle-sku-67242500/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/G diameter 225mm with bore 20H7 and keyway with thread hole for machine handle SKU: 67242201](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-g-diameter-225mm-with-bore-20h7-and-keyway-with-thread-hole-for-machine-handle-sku-67242201/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/G diameter 225mm with thread hole for machine handle SKU: 67242200](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-g-diameter-225mm-with-thread-hole-for-machine-handle-sku-67242200/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/G diameter 200mm with bore 18H7 and keyway with thread hole for machine handle SKU: 67242001](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-g-diameter-200mm-with-bore-18h7-and-keyway-with-thread-hole-for-machine-handle-sku-67242001/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/G diameter 200mm with thread hole for machine handle SKU: 67242000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-g-diameter-200mm-with-thread-hole-for-machine-handle-sku-67242000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/G diameter 180mm with bore 16H7 and keyway with thread hole for machine handle SKU: 67241801](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-g-diameter-180mm-with-bore-16h7-and-keyway-with-thread-hole-for-machine-handle-sku-67241801/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/G diameter 180mm with thread hole for machine handle SKU: 67241800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-g-diameter-180mm-with-thread-hole-for-machine-handle-sku-67241800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/G diameter 160mm with bore 14H7 and keyway with thread hole for machine handle SKU: 67241601](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-g-diameter-160mm-with-bore-14h7-and-keyway-with-thread-hole-for-machine-handle-sku-67241601/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/G diameter 160mm with thread hole for machine handle SKU: 67241600](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-g-diameter-160mm-with-thread-hole-for-machine-handle-sku-67241600/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/G diameter 140mm with bore 14H7 and keyway with thread hole for machine handle SKU: 67241401](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-g-diameter-140mm-with-bore-14h7-and-keyway-with-thread-hole-for-machine-handle-sku-67241401/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/G diameter 140mm with thread hole for machine handle SKU: 67241400](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-g-diameter-140mm-with-thread-hole-for-machine-handle-sku-67241400/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/G diameter 125mm with bore 12H7 and keyway with thread hole for machine handle SKU: 67241201](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-g-diameter-125mm-with-bore-12h7-and-keyway-with-thread-hole-for-machine-handle-sku-67241201/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/G diameter 125mm with thread hole for machine handle SKU: 67241200](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-g-diameter-125mm-with-thread-hole-for-machine-handle-sku-67241200/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/G diameter 100mm with bore 10H7 and keyway with thread hole for machine handle SKU: 67241001](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-g-diameter-100mm-with-bore-10h7-and-keyway-with-thread-hole-for-machine-handle-sku-67241001/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/G diameter 100mm with thread hole for machine handle SKU: 67241000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-g-diameter-100mm-with-thread-hole-for-machine-handle-sku-67241000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/G diameter 80mm with bore 10H7 and keyway with thread hole for machine handle SKU: 67240801](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-g-diameter-80mm-with-bore-10h7-and-keyway-with-thread-hole-for-machine-handle-sku-67240801/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version B/G diameter 80mm with thread hole for machine handle SKU: 67240800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-b-g-diameter-80mm-with-thread-hole-for-machine-handle-sku-67240800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/G: Without keyway. Version N/G: With keyway DIN 6885-1. The handle has to be ordered separately. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/A diameter 400mm with bore 30H7 and keyway SKU: 67224001](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-a-diameter-400mm-with-bore-30h7-and-keyway-sku-67224001/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/A diameter 400mm SKU: 67224000](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-a-diameter-400mm-sku-67224000/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/A diameter 360mm with bore 28H7 and keyway SKU: 67223601](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-a-diameter-360mm-with-bore-28h7-and-keyway-sku-67223601/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/A diameter 360mm SKU: 67223600](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-a-diameter-360mm-sku-67223600/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/A diameter 315mm with bore 26H7 and keyway SKU: 67223101](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-a-diameter-315mm-with-bore-26h7-and-keyway-sku-67223101/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/A diameter 315mm SKU: 67223100](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-a-diameter-315mm-sku-67223100/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/A diameter 280mm with bore 24H7 and keyway SKU: 67222801](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-a-diameter-280mm-with-bore-24h7-and-keyway-sku-67222801/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/A diameter 280mm SKU: 67222800](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-a-diameter-280mm-sku-67222800/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/A diameter 250mm with bore 22H7 and keyway SKU: 67222501](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-a-diameter-250mm-with-bore-22h7-and-keyway-sku-67222501/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/A diameter 250mm SKU: 67222500](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-a-diameter-250mm-sku-67222500/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version N/A diameter 225mm with bore 20H7 and keyway SKU: 67222201](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-n-a-diameter-225mm-with-bore-20h7-and-keyway-sku-67222201/): Material: Grey cast iron. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 5 spokes rim turned and polished version B/A diameter 225mm SKU: 67222200](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-5-spokes-rim-turned-and-polished-version-b-a-diameter-225mm-sku-67222200/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [Spoked handwheel DIN 950 cast iron 3 spokes rim turned and polished version N/A diameter 200mm with bore 18H7 and keyway SKU: 67222001](https://maedler.in/product/spoked-handwheel-din-950-cast-iron-3-spokes-rim-turned-and-polished-version-n-a-diameter-200mm-with-bore-18h7-and-keyway-sku-67222001/): Material: Grey cast iron GG25. Rim turned and polished. Hub surfaces machined. Number of spokes: 3 spokes for sizes up to Ø 200. 5 spokes for sizes from Ø 225. Version B/A: Without keyway. Version N/A: With keyway DIN 6885-1. - [timing bar T5 15 teeth length 140mm material aluminium SKU: 16291500](https://maedler.in/product/timing-bar-t5-15-teeth-length-140mm-material-aluminium-sku-16291500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 14 teeth length 140mm material aluminium SKU: 16291400](https://maedler.in/product/timing-bar-t5-14-teeth-length-140mm-material-aluminium-sku-16291400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 13 teeth length 140mm material aluminium SKU: 16291300](https://maedler.in/product/timing-bar-t5-13-teeth-length-140mm-material-aluminium-sku-16291300/): Material: Aluminium similar EN AW2017A. - [timing bar T5 12 teeth length 140mm material aluminium SKU: 16291200](https://maedler.in/product/timing-bar-t5-12-teeth-length-140mm-material-aluminium-sku-16291200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 11 teeth length 140mm material aluminium SKU: 16291100](https://maedler.in/product/timing-bar-t5-11-teeth-length-140mm-material-aluminium-sku-16291100/): Material: Aluminium similar EN AW2017A. - [timing bar T5 10 teeth length 140mm material aluminium SKU: 16291000](https://maedler.in/product/timing-bar-t5-10-teeth-length-140mm-material-aluminium-sku-16291000/): Material: Aluminium similar EN AW2017A. - [Fixing plate for timing belts material aluminium T5 belt width 50mm SKU: 16289901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-50mm-sku-16289901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium T5 belt width 25mm SKU: 16289900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-25mm-sku-16289900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium T5 belt width 32mm SKU: 16289800](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t5-belt-width-32mm-sku-16289800/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T5 width 50mm 50T5 open length PAZ = Polyamide fabric on tooth side SKU: 16288001](https://maedler.in/product/polyurethane-timing-belt-t5-width-50mm-50t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16288001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 50mm 50 T5 open length with tensile members from steel packed 2 x 25mm SKU: 16288000](https://maedler.in/product/polyurethane-timing-belt-t5-width-50mm-50-t5-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16288000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T5 width 32mm Lw 1440mm 288teeth 32 T5/1440 SKU: 16287064](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1440mm-288teeth-32-t5-1440-sku-16287064/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1380mm 276teeth 32 T5/1380 SKU: 16287063](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1380mm-276teeth-32-t5-1380-sku-16287063/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1215mm 243teeth 32 T5/1215 SKU: 16287062](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1215mm-243teeth-32-t5-1215-sku-16287062/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1100mm 220teeth 32 T5/1100 SKU: 16287061](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1100mm-220teeth-32-t5-1100-sku-16287061/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1075mm 215teeth 32 T5/1075 SKU: 16287060](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1075mm-215teeth-32-t5-1075-sku-16287060/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 1000mm 200teeth 32 T5/1000 SKU: 16287059](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-1000mm-200teeth-32-t5-1000-sku-16287059/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 990mm 198teeth 32 T5/990 SKU: 16287058](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-990mm-198teeth-32-t5-990-sku-16287058/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 900mm 180teeth 32 T5/900 SKU: 16287057](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-900mm-180teeth-32-t5-900-sku-16287057/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 850mm 170teeth 32 T5/850 SKU: 16287056](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-850mm-170teeth-32-t5-850-sku-16287056/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 840mm 168teeth 32 T5/840 SKU: 16287055](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-840mm-168teeth-32-t5-840-sku-16287055/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 815mm 163teeth 32 T5/815 SKU: 16287054](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-815mm-163teeth-32-t5-815-sku-16287054/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 780mm 156teeth 32 T5/780 SKU: 16287053](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-780mm-156teeth-32-t5-780-sku-16287053/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 750mm 150teeth 32 T5/750 SKU: 16287052](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-750mm-150teeth-32-t5-750-sku-16287052/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 720mm 144teeth 32 T5/720 SKU: 16287051](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-720mm-144teeth-32-t5-720-sku-16287051/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 700mm 140teeth 32 T5/700 SKU: 16287050](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-700mm-140teeth-32-t5-700-sku-16287050/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 695mm 139teeth 32 T5/695 SKU: 16287049](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-695mm-139teeth-32-t5-695-sku-16287049/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 690mm 138teeth 32 T5/690 SKU: 16287048](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-690mm-138teeth-32-t5-690-sku-16287048/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 660mm 132teeth 32 T5/660 SKU: 16287047](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-660mm-132teeth-32-t5-660-sku-16287047/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 650mm 130teeth 32 T5/650 SKU: 16287046](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-650mm-130teeth-32-t5-650-sku-16287046/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 640mm 128teeth 32 T5/640 SKU: 16287045](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-640mm-128teeth-32-t5-640-sku-16287045/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 630mm 126teeth 32 T5/630 SKU: 16287044](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-630mm-126teeth-32-t5-630-sku-16287044/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 620mm 124teeth 32 T5/620 SKU: 16287043](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-620mm-124teeth-32-t5-620-sku-16287043/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 610mm 122teeth 32 T5/610 SKU: 16287042](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-610mm-122teeth-32-t5-610-sku-16287042/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 600mm 120teeth 32 T5/600 SKU: 16287041](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-600mm-120teeth-32-t5-600-sku-16287041/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 575mm 115teeth 32 T5/575 SKU: 16287040](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-575mm-115teeth-32-t5-575-sku-16287040/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 560mm 112teeth 32 T5/560 SKU: 16287039](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-560mm-112teeth-32-t5-560-sku-16287039/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 550mm 110teeth 32 T5/550 SKU: 16287038](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-550mm-110teeth-32-t5-550-sku-16287038/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 545mm 109teeth 32 T5/545 SKU: 16287037](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-545mm-109teeth-32-t5-545-sku-16287037/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 525mm 105teeth 32 T5/525 SKU: 16287036](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-525mm-105teeth-32-t5-525-sku-16287036/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 510mm 102teeth 32 T5/510 SKU: 16287035](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-510mm-102teeth-32-t5-510-sku-16287035/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 500mm 100teeth 32 T5/500 SKU: 16287034](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-500mm-100teeth-32-t5-500-sku-16287034/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 480mm 96teeth 32 T5/480 SKU: 16287033](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-480mm-96teeth-32-t5-480-sku-16287033/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 475mm 95teeth 32 T5/475 SKU: 16287032](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-475mm-95teeth-32-t5-475-sku-16287032/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 465mm 93teeth 32 T5/465 SKU: 16287031](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-465mm-93teeth-32-t5-465-sku-16287031/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 455mm 91teeth 32 T5/455 SKU: 16287030](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-455mm-91teeth-32-t5-455-sku-16287030/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 450mm 90teeth 32 T5/450 SKU: 16287029](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-450mm-90teeth-32-t5-450-sku-16287029/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 425mm 85teeth 32 T5/425 SKU: 16287028](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-425mm-85teeth-32-t5-425-sku-16287028/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 420mm 84teeth 32 T5/420 SKU: 16287027](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-420mm-84teeth-32-t5-420-sku-16287027/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 410mm 82teeth 32 T5/410 SKU: 16287026](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-410mm-82teeth-32-t5-410-sku-16287026/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 400mm 80teeth 32 T5/400 SKU: 16287025](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-400mm-80teeth-32-t5-400-sku-16287025/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 390mm 78teeth 32 T5/390 SKU: 16287024](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-390mm-78teeth-32-t5-390-sku-16287024/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 375mm 75teeth 32 T5/375 SKU: 16287023](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-375mm-75teeth-32-t5-375-sku-16287023/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 365mm 73teeth 32 T5/365 SKU: 16287022](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-365mm-73teeth-32-t5-365-sku-16287022/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 355mm 71teeth 32 T5/355 SKU: 16287021](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-355mm-71teeth-32-t5-355-sku-16287021/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 350mm 70teeth 32 T5/350 SKU: 16287020](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-350mm-70teeth-32-t5-350-sku-16287020/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 340mm 68teeth 32 T5/340 SKU: 16287019](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-340mm-68teeth-32-t5-340-sku-16287019/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 330mm 66teeth 32 T5/330 SKU: 16287018](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-330mm-66teeth-32-t5-330-sku-16287018/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 325mm 65teeth 32 T5/325 SKU: 16287017](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-325mm-65teeth-32-t5-325-sku-16287017/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 305mm 61teeth 32 T5/305 SKU: 16287016](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-305mm-61teeth-32-t5-305-sku-16287016/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 300mm 60teeth 32 T5/300 SKU: 16287015](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-300mm-60teeth-32-t5-300-sku-16287015/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 295mm 59teeth 32 T5/295 SKU: 16287014](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-295mm-59teeth-32-t5-295-sku-16287014/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 280mm 56teeth 32 T5/280 SKU: 16287013](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-280mm-56teeth-32-t5-280-sku-16287013/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 275mm 55teeth 32 T5/275 SKU: 16287012](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-275mm-55teeth-32-t5-275-sku-16287012/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 270mm 54teeth 32 T5/270 SKU: 16287011](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-270mm-54teeth-32-t5-270-sku-16287011/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 260mm 52teeth 32 T5/260 SKU: 16287010](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-260mm-52teeth-32-t5-260-sku-16287010/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 255mm 51teeth 32 T5/255 SKU: 16287009](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-255mm-51teeth-32-t5-255-sku-16287009/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 250mm 50teeth 32 T5/250 SKU: 16287008](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-250mm-50teeth-32-t5-250-sku-16287008/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 245mm 49teeth 32 T5/245 SKU: 16287007](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-245mm-49teeth-32-t5-245-sku-16287007/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 225mm 45teeth 32 T5/225 SKU: 16287006](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-225mm-45teeth-32-t5-225-sku-16287006/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 220mm 44 teeth 32 T5/220 SKU: 16287005](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-220mm-44-teeth-32-t5-220-sku-16287005/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm Lw 215mm 43 teeth 32 T5/215 SKU: 16287004](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-lw-215mm-43-teeth-32-t5-215-sku-16287004/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 32mm 32T5 open length PAZ = Polyamide fabric on tooth side SKU: 16287001](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-32t5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16287001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T5 width 32mm 32 T5 open length with tensile members from steel packed 2 x 16mm SKU: 16287000](https://maedler.in/product/polyurethane-timing-belt-t5-width-32mm-32-t5-open-length-with-tensile-members-from-steel-packed-2-x-16mm-sku-16287000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T5 width 25mm Lw 1440mmt 288 teeth 25 T5/1440 SKU: 16286400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1440mmt-288-teeth-25-t5-1440-sku-16286400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1380mm 276 teeth 25 T5/1380 SKU: 16286300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1380mm-276-teeth-25-t5-1380-sku-16286300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1215mm 243 teeth 25 T5/1215 SKU: 16286200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1215mm-243-teeth-25-t5-1215-sku-16286200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1100mm 220 teeth 25 T5/1100 SKU: 16286100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1100mm-220-teeth-25-t5-1100-sku-16286100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1075mm 215 teeth 25 T5/1075 SKU: 16286000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1075mm-215-teeth-25-t5-1075-sku-16286000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 1000mm 200 teeth 25 T5/1000 SKU: 16285900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-1000mm-200-teeth-25-t5-1000-sku-16285900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 990mm 198 teeth 25 T5/990 SKU: 16285800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-990mm-198-teeth-25-t5-990-sku-16285800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 900mm 180 teeth 25 T5/900 SKU: 16285700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-900mm-180-teeth-25-t5-900-sku-16285700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 850mm 170 teeth 25 T5/850 SKU: 16285600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-850mm-170-teeth-25-t5-850-sku-16285600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 840mm 168 teeth 25 T5/840 SKU: 16285500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-840mm-168-teeth-25-t5-840-sku-16285500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 815mm 163 teeth 25 T5/815 SKU: 16285400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-815mm-163-teeth-25-t5-815-sku-16285400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 780mm 156 teeth 25 T5/780 SKU: 16285300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-780mm-156-teeth-25-t5-780-sku-16285300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 750mm 150 teeth 25 T5/750 SKU: 16285200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-750mm-150-teeth-25-t5-750-sku-16285200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 720mm 144 teeth 25 T5/720 SKU: 16285100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-720mm-144-teeth-25-t5-720-sku-16285100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 700mm 140 teeth 25 T5/700 SKU: 16285000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-700mm-140-teeth-25-t5-700-sku-16285000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 695mm 139 teeth 25 T5/695 SKU: 16284900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-695mm-139-teeth-25-t5-695-sku-16284900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 690mm 138 teeth 25 T5/690 SKU: 16284800](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-690mm-138-teeth-25-t5-690-sku-16284800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 660mm 132 teeth 25 T5/660 SKU: 16284700](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-660mm-132-teeth-25-t5-660-sku-16284700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 650mm 130 teeth 25 T5/650 SKU: 16284600](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-650mm-130-teeth-25-t5-650-sku-16284600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 640mm 128 teeth 25 T5/640 SKU: 16284500](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-640mm-128-teeth-25-t5-640-sku-16284500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 630mm 126 teeth 25 T5/630 SKU: 16284400](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-630mm-126-teeth-25-t5-630-sku-16284400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 620mm 124 teeth 25 T5/620 SKU: 16284300](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-620mm-124-teeth-25-t5-620-sku-16284300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 610mm 122 teeth 25 T5/610 SKU: 16284200](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-610mm-122-teeth-25-t5-610-sku-16284200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 600mm 120 teeth 25 T5/600 SKU: 16284100](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-600mm-120-teeth-25-t5-600-sku-16284100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 575mm 115 teeth 25 T5/575 SKU: 16284000](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-575mm-115-teeth-25-t5-575-sku-16284000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T5 width 25mm Lw 560mm 112 teeth 25 T5/560 SKU: 16283900](https://maedler.in/product/polyurethane-timing-belt-t5-width-25mm-lw-560mm-112-teeth-25-t5-560-sku-16283900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Hinge M237 Zinc die casting, type C, 50x50mm SKU: 67700306](https://maedler.in/product/hinge-m237-zinc-die-casting-type-c-50x50mm-sku-67700306/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Pin: 1.4305. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Zinc die casting, type C, 40x40mm SKU: 67700305](https://maedler.in/product/hinge-m237-zinc-die-casting-type-c-40x40mm-sku-67700305/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Pin: 1.4305. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Zinc die casting, type A, 60x60mm SKU: 67700304](https://maedler.in/product/hinge-m237-zinc-die-casting-type-a-60x60mm-sku-67700304/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Pin: 1.4305. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Zinc die casting, type A, 50x50mm SKU: 67700303](https://maedler.in/product/hinge-m237-zinc-die-casting-type-a-50x50mm-sku-67700303/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Pin: 1.4305. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Zinc die casting, type A, 40x40mm SKU: 67700302](https://maedler.in/product/hinge-m237-zinc-die-casting-type-a-40x40mm-sku-67700302/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Pin: 1.4305. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Zinc die casting, type A, 30x30mm SKU: 67700301](https://maedler.in/product/hinge-m237-zinc-die-casting-type-a-30x30mm-sku-67700301/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Pin: 1.4305. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M233 plastic, with adjustable friction, 57x64mm SKU: 67700282](https://maedler.in/product/hinge-m233-plastic-with-adjustable-friction-57x64mm-sku-67700282/): Material: Body: Polyacetal (POM), RAL 9005, semi-matt. Pin: Polycarbonate (PC). Adjusting screw and nut: Stainless steel 1.4305. At these non-detachable hinges, the friction can be varied by an adjusting screw. Endurance tests have shown that the torque has almost not changed even after 60.000 opening / closing cycles (0.8 Nm tightening torque of the set screw). Temperature resistant up to +65°C. Flammability category UL 94-HB. 1) Fastening torque for fitting screw in d1. 2) Max. axial force.   3) Max. radial force at opening angle 90°.   These are non-binding guide values without any liability. - [Hinge M233 plastic, with adjustable friction, 37x43mm SKU: 67700281](https://maedler.in/product/hinge-m233-plastic-with-adjustable-friction-37x43mm-sku-67700281/): Material: Body: Polyacetal (POM), RAL 9005, semi-matt. Pin: Polycarbonate (PC). Adjusting screw and nut: Stainless steel 1.4305. At these non-detachable hinges, the friction can be varied by an adjusting screw. Endurance tests have shown that the torque has almost not changed even after 60.000 opening / closing cycles (0.8 Nm tightening torque of the set screw). Temperature resistant up to +65°C. Flammability category UL 94-HB. 1) Fastening torque for fitting screw in d1. 2) Max. axial force.   3) Max. radial force at opening angle 90°.   These are non-binding guide values without any liability. - [Hinge M151 plastic, type C, 98x98mm SKU: 67700252](https://maedler.in/product/hinge-m151-plastic-type-c-98x98mm-sku-67700252/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type C, 64x65mm SKU: 67700251](https://maedler.in/product/hinge-m151-plastic-type-c-64x65mm-sku-67700251/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type C, 48x49mm SKU: 67700250](https://maedler.in/product/hinge-m151-plastic-type-c-48x49mm-sku-67700250/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type C, 39x40mm SKU: 67700249](https://maedler.in/product/hinge-m151-plastic-type-c-39x40mm-sku-67700249/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type B, 98x98mm SKU: 67700248](https://maedler.in/product/hinge-m151-plastic-type-b-98x98mm-sku-67700248/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type B, 64x65mm SKU: 67700247](https://maedler.in/product/hinge-m151-plastic-type-b-64x65mm-sku-67700247/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type B, 48x49mm SKU: 67700246](https://maedler.in/product/hinge-m151-plastic-type-b-48x49mm-sku-67700246/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type B, 39x40mm SKU: 67700245](https://maedler.in/product/hinge-m151-plastic-type-b-39x40mm-sku-67700245/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type A, 98x98mm SKU: 67700244](https://maedler.in/product/hinge-m151-plastic-type-a-98x98mm-sku-67700244/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type A, 64x65mm SKU: 67700243](https://maedler.in/product/hinge-m151-plastic-type-a-64x65mm-sku-67700243/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type A, 48x49mm SKU: 67700242](https://maedler.in/product/hinge-m151-plastic-type-a-48x49mm-sku-67700242/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M151 plastic, type A, 39x40mm SKU: 67700241](https://maedler.in/product/hinge-m151-plastic-type-a-39x40mm-sku-67700241/): Material: Body: plastic (polyamide), black matt. Pin: Stainless steel 1.4305. Threaded bolt: Nickel-plated brass. Threaded bushings: Nickel-plated brass. Non-detachable hinges. 3 types for choice: with threaded blind holes or cylindrical, stepped bores for socket head cap screws or countersunk bores or threaded bolts or in combinations. Temperature resistant up to +80 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M138 Zinc die casting, plastic coated silver, 60x62mm SKU: 67700233](https://maedler.in/product/hinge-m138-zinc-die-casting-plastic-coated-silver-60x62mm-sku-67700233/): Material: Zinc die-cast, plastic-coated, matt textured finish, black RAL 9005 or silver RAL 9006. Pin: Stainless steel 1.4305. Non-detachable hinge for tamper proof mounting from the rear. Well-designed, with stylish appearance. The dimensions l1 / l2 and bore distances m comply with the current hinges M237 / M237.1 and can replace these. * Pin diameter. 1) Max. axial force.   2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M138 Zinc die casting, plastic coated silver, 50x52mm SKU: 67700232](https://maedler.in/product/hinge-m138-zinc-die-casting-plastic-coated-silver-50x52mm-sku-67700232/): Material: Zinc die-cast, plastic-coated, matt textured finish, black RAL 9005 or silver RAL 9006. Pin: Stainless steel 1.4305. Non-detachable hinge for tamper proof mounting from the rear. Well-designed, with stylish appearance. The dimensions l1 / l2 and bore distances m comply with the current hinges M237 / M237.1 and can replace these. * Pin diameter. 1) Max. axial force.   2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M138 Zinc die casting, plastic coated silver, 40x42mm SKU: 67700231](https://maedler.in/product/hinge-m138-zinc-die-casting-plastic-coated-silver-40x42mm-sku-67700231/): Material: Zinc die-cast, plastic-coated, matt textured finish, black RAL 9005 or silver RAL 9006. Pin: Stainless steel 1.4305. Non-detachable hinge for tamper proof mounting from the rear. Well-designed, with stylish appearance. The dimensions l1 / l2 and bore distances m comply with the current hinges M237 / M237.1 and can replace these. * Pin diameter. 1) Max. axial force.   2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M138 Zinc die casting, plastic coated black, 60x62mm SKU: 67700223](https://maedler.in/product/hinge-m138-zinc-die-casting-plastic-coated-black-60x62mm-sku-67700223/): Material: Zinc die-cast, plastic-coated, matt textured finish, black RAL 9005 or silver RAL 9006. Pin: Stainless steel 1.4305. Non-detachable hinge for tamper proof mounting from the rear. Well-designed, with stylish appearance. The dimensions l1 / l2 and bore distances m comply with the current hinges M237 / M237.1 and can replace these. * Pin diameter. 1) Max. axial force.   2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M138 Zinc die casting, plastic coated black, 50x52mm SKU: 67700222](https://maedler.in/product/hinge-m138-zinc-die-casting-plastic-coated-black-50x52mm-sku-67700222/): Material: Zinc die-cast, plastic-coated, matt textured finish, black RAL 9005 or silver RAL 9006. Pin: Stainless steel 1.4305. Non-detachable hinge for tamper proof mounting from the rear. Well-designed, with stylish appearance. The dimensions l1 / l2 and bore distances m comply with the current hinges M237 / M237.1 and can replace these. * Pin diameter. 1) Max. axial force.   2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M138 Zinc die casting, plastic coated black, 40x42mm SKU: 67700221](https://maedler.in/product/hinge-m138-zinc-die-casting-plastic-coated-black-40x42mm-sku-67700221/): Material: Zinc die-cast, plastic-coated, matt textured finish, black RAL 9005 or silver RAL 9006. Pin: Stainless steel 1.4305. Non-detachable hinge for tamper proof mounting from the rear. Well-designed, with stylish appearance. The dimensions l1 / l2 and bore distances m comply with the current hinges M237 / M237.1 and can replace these. * Pin diameter. 1) Max. axial force.   2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 stainless steel 1.4301, type C, 60x60mm SKU: 67700213](https://maedler.in/product/sheet-metal-hinge-m136-stainless-steel-1-4301-type-c-60x60mm-sku-67700213/): Material: Stainless steel 1.4301 (AISI 304). Non-detachable hinge. Low-cost designs for low-load applications. Type A: for welding. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force. 2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 stainless steel 1.4301, type C, 50x50mm SKU: 67700212](https://maedler.in/product/sheet-metal-hinge-m136-stainless-steel-1-4301-type-c-50x50mm-sku-67700212/): Material: Stainless steel 1.4301 (AISI 304). Non-detachable hinge. Low-cost designs for low-load applications. Type A: for welding. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force. 2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 stainless steel 1.4301, type C, 40x40mm SKU: 67700211](https://maedler.in/product/sheet-metal-hinge-m136-stainless-steel-1-4301-type-c-40x40mm-sku-67700211/): Material: Stainless steel 1.4301 (AISI 304). Non-detachable hinge. Low-cost designs for low-load applications. Type A: for welding. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force. 2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 steel zinc plated, type C, 60x60mm SKU: 67700203](https://maedler.in/product/sheet-metal-hinge-m136-steel-zinc-plated-type-c-60x60mm-sku-67700203/): Material: Steel, zinc plated. Non-detachable hinge. Low-cost designs for low-load applications. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force.   2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 steel zinc plated, type C, 50x50mm SKU: 67700202](https://maedler.in/product/sheet-metal-hinge-m136-steel-zinc-plated-type-c-50x50mm-sku-67700202/): Material: Steel, zinc plated. Non-detachable hinge. Low-cost designs for low-load applications. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force.   2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 steel zinc plated, type C, 40x40mm SKU: 67700201](https://maedler.in/product/sheet-metal-hinge-m136-steel-zinc-plated-type-c-40x40mm-sku-67700201/): Material: Steel, zinc plated. Non-detachable hinge. Low-cost designs for low-load applications. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force.   2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 stainless steel 1.4301, type B, 60x60mm SKU: 67700193](https://maedler.in/product/sheet-metal-hinge-m136-stainless-steel-1-4301-type-b-60x60mm-sku-67700193/): Material: Stainless steel 1.4301 (AISI 304). Non-detachable hinge. Low-cost designs for low-load applications. Type A: for welding. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force. 2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 stainless steel 1.4301, type B, 50x50mm SKU: 67700192](https://maedler.in/product/sheet-metal-hinge-m136-stainless-steel-1-4301-type-b-50x50mm-sku-67700192/): Material: Stainless steel 1.4301 (AISI 304). Non-detachable hinge. Low-cost designs for low-load applications. Type A: for welding. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force. 2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 stainless steel 1.4301, type B, 40x40mm SKU: 67700191](https://maedler.in/product/sheet-metal-hinge-m136-stainless-steel-1-4301-type-b-40x40mm-sku-67700191/): Material: Stainless steel 1.4301 (AISI 304). Non-detachable hinge. Low-cost designs for low-load applications. Type A: for welding. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force. 2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 steel zinc plated, type B, 60x60mm SKU: 67700183](https://maedler.in/product/sheet-metal-hinge-m136-steel-zinc-plated-type-b-60x60mm-sku-67700183/): Material: Steel, zinc plated. Non-detachable hinge. Low-cost designs for low-load applications. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force.   2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 steel zinc plated, type B, 50x50mm SKU: 67700182](https://maedler.in/product/sheet-metal-hinge-m136-steel-zinc-plated-type-b-50x50mm-sku-67700182/): Material: Steel, zinc plated. Non-detachable hinge. Low-cost designs for low-load applications. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force.   2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 steel zinc plated, type B, 40x40mm SKU: 67700181](https://maedler.in/product/sheet-metal-hinge-m136-steel-zinc-plated-type-b-40x40mm-sku-67700181/): Material: Steel, zinc plated. Non-detachable hinge. Low-cost designs for low-load applications. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force.   2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 stainless steel 1.4301, type A, 60x60mm SKU: 67700173](https://maedler.in/product/sheet-metal-hinge-m136-stainless-steel-1-4301-type-a-60x60mm-sku-67700173/): Material: Stainless steel 1.4301 (AISI 304). Non-detachable hinge. Low-cost designs for low-load applications. Type A: for welding. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force. 2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 stainless steel 1.4301, type A, 50x50mm SKU: 67700172](https://maedler.in/product/sheet-metal-hinge-m136-stainless-steel-1-4301-type-a-50x50mm-sku-67700172/): Material: Stainless steel 1.4301 (AISI 304). Non-detachable hinge. Low-cost designs for low-load applications. Type A: for welding. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force. 2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Sheet metal hinge M136 stainless steel 1.4301, type A, 40x40mm SKU: 67700171](https://maedler.in/product/sheet-metal-hinge-m136-stainless-steel-1-4301-type-a-40x40mm-sku-67700171/): Material: Stainless steel 1.4301 (AISI 304). Non-detachable hinge. Low-cost designs for low-load applications. Type A: for welding. Type B: with bores for cylinder head screws / lens head screws. Type C: with bore for countersunk screws. 1) Max. axial force. 2) Max. Radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M129 steel zinc plated, type Z, square 16mm SKU: 67700154](https://maedler.in/product/hinge-m129-steel-zinc-plated-type-z-square-16mm-sku-67700154/): Material: Steel, zinc-plated. Pin and washer: Brass, nickel-plated. These hinges are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door. Type D: The three-part, non-detachable hinges are to be mounted inside, suitable for doors and covers, which must not be dismountable from the outside. Type Z: The two-part hinges are detachable, if the hinges are identically arranged (all hinges mounted in the same direction). - [Hinge M129 steel zinc plated, type Z, square 12mm SKU: 67700153](https://maedler.in/product/hinge-m129-steel-zinc-plated-type-z-square-12mm-sku-67700153/): Material: Steel, zinc-plated. Pin and washer: Brass, nickel-plated. These hinges are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door. Type D: The three-part, non-detachable hinges are to be mounted inside, suitable for doors and covers, which must not be dismountable from the outside. Type Z: The two-part hinges are detachable, if the hinges are identically arranged (all hinges mounted in the same direction). - [Hinge M129 steel zinc plated, type D, square 16mm SKU: 67700152](https://maedler.in/product/hinge-m129-steel-zinc-plated-type-d-square-16mm-sku-67700152/): Material: Steel, zinc-plated. Pin and washer: Brass, nickel-plated. These hinges are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door. Type D: The three-part, non-detachable hinges are to be mounted inside, suitable for doors and covers, which must not be dismountable from the outside. Type Z: The two-part hinges are detachable, if the hinges are identically arranged (all hinges mounted in the same direction). - [Hinge M129 steel zinc plated, type D, square 12mm SKU: 67700151](https://maedler.in/product/hinge-m129-steel-zinc-plated-type-d-square-12mm-sku-67700151/): Material: Steel, zinc-plated. Pin and washer: Brass, nickel-plated. These hinges are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door. Type D: The three-part, non-detachable hinges are to be mounted inside, suitable for doors and covers, which must not be dismountable from the outside. Type Z: The two-part hinges are detachable, if the hinges are identically arranged (all hinges mounted in the same direction). - [Hinge M128 steel, for welding, type STS, l=200mm SKU: 67700130](https://maedler.in/product/hinge-m128-steel-for-welding-type-sts-l200mm-sku-67700130/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type STS, l=180mm SKU: 67700129](https://maedler.in/product/hinge-m128-steel-for-welding-type-sts-l180mm-sku-67700129/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type STS, l=150mm SKU: 67700128](https://maedler.in/product/hinge-m128-steel-for-welding-type-sts-l150mm-sku-67700128/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type STS, l=135mm SKU: 67700127](https://maedler.in/product/hinge-m128-steel-for-welding-type-sts-l135mm-sku-67700127/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type STS, l=120mm SKU: 67700126](https://maedler.in/product/hinge-m128-steel-for-welding-type-sts-l120mm-sku-67700126/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type STS, l=100mm SKU: 67700125](https://maedler.in/product/hinge-m128-steel-for-welding-type-sts-l100mm-sku-67700125/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type STS, l=80mm SKU: 67700124](https://maedler.in/product/hinge-m128-steel-for-welding-type-sts-l80mm-sku-67700124/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=200mm SKU: 67700120](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l200mm-sku-67700120/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=180mm SKU: 67700119](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l180mm-sku-67700119/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=150mm SKU: 67700118](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l150mm-sku-67700118/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=135mm SKU: 67700117](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l135mm-sku-67700117/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=120mm SKU: 67700116](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l120mm-sku-67700116/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=100mm SKU: 67700115](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l100mm-sku-67700115/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=80mm SKU: 67700114](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l80mm-sku-67700114/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=60mm SKU: 67700113](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l60mm-sku-67700113/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=50mm SKU: 67700112](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l50mm-sku-67700112/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M128 steel, for welding, type ST, l=40mm SKU: 67700111](https://maedler.in/product/hinge-m128-steel-for-welding-type-st-l40mm-sku-67700111/): Material: Housing and Pin from Steel, Sliding disk from Brass. These detachable hinges are produced from weldable drawn steel. Type ST: The hinge pin is fixed in one half of hinge. Type STS: Like ST, but with lubricating nipple DIN 71412-D. - [Hinge M127 zinc die casting, adjustable, type HB, 76x60mm SKU: 67700103](https://maedler.in/product/hinge-m127-zinc-die-casting-adjustable-type-hb-76x60mm-sku-67700103/): Material: Zinc die cast, plastic coated black, textured finish. Pin: Stainless steel 1.4305. These adjustable, non-detachable hinges allow the accurate positioning of a door or cover in its frame. The serrations at the hinge holes and at the adjusting bushes create a form lock which prevents the hinge from moving after installation. Adjusting range +/- 2mm. Type H: horizontal adjustable. Type B: vertical adjustable. Type HB: vertical and horizontal adjustable. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M127 zinc die casting, adjustable, type B, 76x60mm SKU: 67700102](https://maedler.in/product/hinge-m127-zinc-die-casting-adjustable-type-b-76x60mm-sku-67700102/): Material: Zinc die cast, plastic coated black, textured finish. Pin: Stainless steel 1.4305. These adjustable, non-detachable hinges allow the accurate positioning of a door or cover in its frame. The serrations at the hinge holes and at the adjusting bushes create a form lock which prevents the hinge from moving after installation. Adjusting range +/- 2mm. Type H: horizontal adjustable. Type B: vertical adjustable. Type HB: vertical and horizontal adjustable. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M127 zinc die casting, adjustable, type H, 76x60mm SKU: 67700101](https://maedler.in/product/hinge-m127-zinc-die-casting-adjustable-type-h-76x60mm-sku-67700101/): Material: Zinc die cast, plastic coated black, textured finish. Pin: Stainless steel 1.4305. These adjustable, non-detachable hinges allow the accurate positioning of a door or cover in its frame. The serrations at the hinge holes and at the adjusting bushes create a form lock which prevents the hinge from moving after installation. Adjusting range +/- 2mm. Type H: horizontal adjustable. Type B: vertical adjustable. Type HB: vertical and horizontal adjustable. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Latch clamp size 320 made from stainless 1.4301 / 1.4305 SKU: 67699206](https://maedler.in/product/latch-clamp-size-320-made-from-stainless-1-4301-1-4305-sku-67699206/): Material: Sheet-metal parts: 1.4301 (AISI 304) Pulling latch: 1.4305 (AISI 303) Handle: Plastic sleeve, red, oil resistant. Latch clamps allow a fast and secure locking of lids and covers. The stroke of the pulling ledge can be adjusted within its range. In the clamped position the pulling ledge with its clamping arm is parallel to the plane of the operating handle. Latch bracket included in the delivery. - [Latch clamp size 160 made from stainless 1.4301 / 1.4305 SKU: 67699204](https://maedler.in/product/latch-clamp-size-160-made-from-stainless-1-4301-1-4305-sku-67699204/): Material: Sheet-metal parts: 1.4301 (AISI 304) Pulling latch: 1.4305 (AISI 303) Handle: Plastic sleeve, red, oil resistant. Latch clamps allow a fast and secure locking of lids and covers. The stroke of the pulling ledge can be adjusted within its range. In the clamped position the pulling ledge with its clamping arm is parallel to the plane of the operating handle. Latch bracket included in the delivery. - [Latch clamp size 700 SKU: 67620800](https://maedler.in/product/latch-clamp-size-700-sku-67620800/): Material: Sheet-metal parts: Case-hardened steel C10, zinc-plated, blue passivated. Pulling latch: Steel St37, zinc-plated, blue passivated. Handle with plastic sleeve, red, oil resistant. Latch clamps allow a fast and secure locking of lids and covers. The stroke of the pulling ledge can be adjusted within its range. In the clamped position the pulling ledge with its clamping arm is parallel to the plane of the operating handle. Latch bracket included in the delivery. - [Latch clamp size 320 SKU: 67620600](https://maedler.in/product/latch-clamp-size-320-sku-67620600/): Material: Sheet-metal parts: Case-hardened steel C10, zinc-plated, blue passivated. Pulling latch: Steel St37, zinc-plated, blue passivated. Handle with plastic sleeve, red, oil resistant. Latch clamps allow a fast and secure locking of lids and covers. The stroke of the pulling ledge can be adjusted within its range. In the clamped position the pulling ledge with its clamping arm is parallel to the plane of the operating handle. Latch bracket included in the delivery. - [Latch clamp size 160 SKU: 67620400](https://maedler.in/product/latch-clamp-size-160-sku-67620400/): Material: Sheet-metal parts: Case-hardened steel C10, zinc-plated, blue passivated. Pulling latch: Steel St37, zinc-plated, blue passivated. Handle with plastic sleeve, red, oil resistant. Latch clamps allow a fast and secure locking of lids and covers. The stroke of the pulling ledge can be adjusted within its range. In the clamped position the pulling ledge with its clamping arm is parallel to the plane of the operating handle. Latch bracket included in the delivery. - [Horizontal clamp version O size 455 SKU: 67616200](https://maedler.in/product/horizontal-clamp-version-o-size-455-sku-67616200/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version O size 355 SKU: 67615700](https://maedler.in/product/horizontal-clamp-version-o-size-355-sku-67615700/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version O size 230 SKU: 67615100](https://maedler.in/product/horizontal-clamp-version-o-size-230-sku-67615100/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version O size 130 SKU: 67614500](https://maedler.in/product/horizontal-clamp-version-o-size-130-sku-67614500/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version O size 75 SKU: 67614300](https://maedler.in/product/horizontal-clamp-version-o-size-75-sku-67614300/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version M size 455 SKU: 67612200](https://maedler.in/product/horizontal-clamp-version-m-size-455-sku-67612200/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version M size 355 SKU: 67611700](https://maedler.in/product/horizontal-clamp-version-m-size-355-sku-67611700/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version M size 230 SKU: 67611100](https://maedler.in/product/horizontal-clamp-version-m-size-230-sku-67611100/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version M size 130 SKU: 67610500](https://maedler.in/product/horizontal-clamp-version-m-size-130-sku-67610500/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version M size 75 SKU: 67610300](https://maedler.in/product/horizontal-clamp-version-m-size-75-sku-67610300/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Horizontal clamp version M size 25 SKU: 67610200](https://maedler.in/product/horizontal-clamp-version-m-size-25-sku-67610200/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: hardened, from size 350 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Note: A special feature of the horizontal clamp is its low profile in the clamping position.They are designed to avoid the operator's fingers being caught between the retracting clamping arm and the operating handle (safety distance). During the closing movement it is guided on both sides to prevent it from being affected by possible side thrusts. Version M: forked clamping arm. Version O: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Size 25 only available in version M. - [Vertical clamp version E size 530 SKU: 67606500](https://maedler.in/product/vertical-clamp-version-e-size-530-sku-67606500/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version E size 430 SKU: 67606000](https://maedler.in/product/vertical-clamp-version-e-size-430-sku-67606000/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version E size 330 SKU: 67605500](https://maedler.in/product/vertical-clamp-version-e-size-330-sku-67605500/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version E size 230 SKU: 67605000](https://maedler.in/product/vertical-clamp-version-e-size-230-sku-67605000/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version E size 130 SKU: 67604600](https://maedler.in/product/vertical-clamp-version-e-size-130-sku-67604600/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version E size 70 SKU: 67604300](https://maedler.in/product/vertical-clamp-version-e-size-70-sku-67604300/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version A size 530 SKU: 67602500](https://maedler.in/product/vertical-clamp-version-a-size-530-sku-67602500/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version A size 430 SKU: 67602000](https://maedler.in/product/vertical-clamp-version-a-size-430-sku-67602000/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version A size 330 SKU: 67601500](https://maedler.in/product/vertical-clamp-version-a-size-330-sku-67601500/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version A size 230 SKU: 67601000](https://maedler.in/product/vertical-clamp-version-a-size-230-sku-67601000/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version A size 130 SKU: 67600600](https://maedler.in/product/vertical-clamp-version-a-size-130-sku-67600600/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Vertical clamp version A size 70 SKU: 67600300](https://maedler.in/product/vertical-clamp-version-a-size-70-sku-67600300/): Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately. - [Protective cap for clamping bolt M12 SKU: 67600052](https://maedler.in/product/protective-cap-for-clamping-bolt-m12-sku-67600052/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Protective cap for clamping bolt M10 SKU: 67600050](https://maedler.in/product/protective-cap-for-clamping-bolt-m10-sku-67600050/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Protective cap for clamping bolt M 8 SKU: 67600048](https://maedler.in/product/protective-cap-for-clamping-bolt-m-8-sku-67600048/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Protective cap for clamping bolt M 6 SKU: 67600046](https://maedler.in/product/protective-cap-for-clamping-bolt-m-6-sku-67600046/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Protective cap for clamping bolt M 5 SKU: 67600045](https://maedler.in/product/protective-cap-for-clamping-bolt-m-5-sku-67600045/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Protective cap for clamping bolt M 4 SKU: 67600044](https://maedler.in/product/protective-cap-for-clamping-bolt-m-4-sku-67600044/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Clamping bolt shape A M12 SKU: 67600012](https://maedler.in/product/clamping-bolt-shape-a-m12-sku-67600012/): Material: Hexagon Bolt: DIN 933, steel, strength class 8, zinc-plated. Hexagon nuts: DIN 934/DIN 936, steel, zinc-plated. Protective cap: Neoprene 85° Shore hardness, black. Note: protective cap has to be ordered separately. This protective cap is elastic and can be easily slipped over the bolt head. - [Polyurethane timing belt AT3 width 6mm Lw 201mm 67 teeth 6 AT3/201 SKU: 16360200](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-201mm-67-teeth-6-at3-201-sku-16360200/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 150mm 50 teeth 6 AT3/150 SKU: 16360100](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-150mm-50-teeth-6-at3-150-sku-16360100/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Timing belt pulley AT3 material aluminium 96 teeth for belt width 10 mm 21 AT3/96-0 SKU: 16339600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-96-teeth-for-belt-width-10-mm-21-at3-96-0-sku-16339600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 84 teeth for belt width 10 mm 21 AT3/84-0 SKU: 16338400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-84-teeth-for-belt-width-10-mm-21-at3-84-0-sku-16338400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 72 teeth for belt width 10mm 21 AT3/72-0 SKU: 16337200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-72-teeth-for-belt-width-10mm-21-at3-72-0-sku-16337200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 60 teeth for belt width 10mm 21 AT3/60-0 SKU: 16336000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-60-teeth-for-belt-width-10mm-21-at3-60-0-sku-16336000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 48 teeth for belt width 10mm 21 AT3/48-0 SKU: 16334800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-48-teeth-for-belt-width-10mm-21-at3-48-0-sku-16334800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 45 teeth for belt width 10mm 21 AT3/45-0 SKU: 16334500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-45-teeth-for-belt-width-10mm-21-at3-45-0-sku-16334500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 44 teeth for belt width 10mm 21 AT3/44-0 SKU: 16334400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-44-teeth-for-belt-width-10mm-21-at3-44-0-sku-16334400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 42 teeth for belt width 10mm 21 AT3/42-2 SKU: 16334200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-42-teeth-for-belt-width-10mm-21-at3-42-2-sku-16334200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 40 teeth for belt width 10mm 21 AT3/40-2 SKU: 16334000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-40-teeth-for-belt-width-10mm-21-at3-40-2-sku-16334000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 36 teeth for belt width 10mm 21 AT3/36-2 SKU: 16333600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-36-teeth-for-belt-width-10mm-21-at3-36-2-sku-16333600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 32 teeth for belt width 10mm 21 AT3/32-2 SKU: 16333200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-32-teeth-for-belt-width-10mm-21-at3-32-2-sku-16333200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 30 teeth for belt width 10mm 21 AT3/30-2 SKU: 16333000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-30-teeth-for-belt-width-10mm-21-at3-30-2-sku-16333000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 28 teeth for belt width 10mm 21 AT3/28-2 SKU: 16332800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-28-teeth-for-belt-width-10mm-21-at3-28-2-sku-16332800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 27 teeth for belt width 10mm 21 AT3/27-2 SKU: 16332700](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-27-teeth-for-belt-width-10mm-21-at3-27-2-sku-16332700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 26 teeth for belt width 10mm 21 AT3/26-2 SKU: 16332600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-26-teeth-for-belt-width-10mm-21-at3-26-2-sku-16332600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 25 teeth for belt width 10mm 21 AT3/25-2 SKU: 16332500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-25-teeth-for-belt-width-10mm-21-at3-25-2-sku-16332500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 24 teeth for belt width 10mm 21 AT3/24-2 SKU: 16332400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-24-teeth-for-belt-width-10mm-21-at3-24-2-sku-16332400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 22 teeth for belt width 10mm 21 AT3/22-2 SKU: 16332200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-22-teeth-for-belt-width-10mm-21-at3-22-2-sku-16332200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 20 teeth for belt width 10mm 21 AT3/20-2 SKU: 16332000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-20-teeth-for-belt-width-10mm-21-at3-20-2-sku-16332000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 19 teeth for belt width 10mm 21 AT3/19-2 SKU: 16331900](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-19-teeth-for-belt-width-10mm-21-at3-19-2-sku-16331900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 18 teeth for belt width 10mm 21 AT3/18-2 SKU: 16331800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-18-teeth-for-belt-width-10mm-21-at3-18-2-sku-16331800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 17 teeth for belt width 10 mm 21 AT3/17-2 SKU: 16331700](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-17-teeth-for-belt-width-10-mm-21-at3-17-2-sku-16331700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 16 teeth for belt width 10mm 21 AT3/16-2 SKU: 16331600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-16-teeth-for-belt-width-10mm-21-at3-16-2-sku-16331600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 15 teeth for belt width 10mm 21 AT3/15-2 SKU: 16331500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-15-teeth-for-belt-width-10mm-21-at3-15-2-sku-16331500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 96 teeth for belt width 6 mm 16 AT3/96-0 SKU: 16329600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-96-teeth-for-belt-width-6-mm-16-at3-96-0-sku-16329600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 84 teeth for belt width 6 mm 16 AT3/84-0 SKU: 16328400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-84-teeth-for-belt-width-6-mm-16-at3-84-0-sku-16328400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 72 teeth for belt width 6mm 16 AT3/72-0 SKU: 16327200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-72-teeth-for-belt-width-6mm-16-at3-72-0-sku-16327200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 60 teeth for belt width 6mm 16 AT3/60-0 SKU: 16326000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-60-teeth-for-belt-width-6mm-16-at3-60-0-sku-16326000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 48 teeth for belt width 6mm 16 AT3/48-0 SKU: 16324800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-48-teeth-for-belt-width-6mm-16-at3-48-0-sku-16324800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 45 teeth for belt width 6mm 16 AT3/45-0 SKU: 16324500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-45-teeth-for-belt-width-6mm-16-at3-45-0-sku-16324500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 44 teeth for belt width 6mm 16 AT3/44-0 SKU: 16324400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-44-teeth-for-belt-width-6mm-16-at3-44-0-sku-16324400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 42 teeth for belt width 6mm 16 AT3/42-2 SKU: 16324200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-42-teeth-for-belt-width-6mm-16-at3-42-2-sku-16324200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 40 teeth for belt width 6mm 16 AT3/40-2 SKU: 16324000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-40-teeth-for-belt-width-6mm-16-at3-40-2-sku-16324000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 36 teeth for belt width 6mm 16 AT3/36-2 SKU: 16323600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-36-teeth-for-belt-width-6mm-16-at3-36-2-sku-16323600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 32 teeth for belt width 6mm 16 AT3/32-2 SKU: 16323200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-32-teeth-for-belt-width-6mm-16-at3-32-2-sku-16323200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 30 teeth for belt width 6mm 16 AT3/30-2 SKU: 16323000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-30-teeth-for-belt-width-6mm-16-at3-30-2-sku-16323000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 28 teeth for belt width 6mm 16 AT3/28-2 SKU: 16322800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-28-teeth-for-belt-width-6mm-16-at3-28-2-sku-16322800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 27 teeth for belt width 6mm 16 AT3/27-2 SKU: 16322700](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-27-teeth-for-belt-width-6mm-16-at3-27-2-sku-16322700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 26 teeth for belt width 6mm 16 AT3/26-2 SKU: 16322600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-26-teeth-for-belt-width-6mm-16-at3-26-2-sku-16322600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 25 teeth for belt width 6mm 16 AT3/25-2 SKU: 16322500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-25-teeth-for-belt-width-6mm-16-at3-25-2-sku-16322500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 24 teeth for belt width 6mm 16 AT3/24-2 SKU: 16322400](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-24-teeth-for-belt-width-6mm-16-at3-24-2-sku-16322400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 22 teeth for belt width 6mm 16 AT3/22-2 SKU: 16322200](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-22-teeth-for-belt-width-6mm-16-at3-22-2-sku-16322200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 20 teeth for belt width 6mm 16 AT3/20-2 SKU: 16322000](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-20-teeth-for-belt-width-6mm-16-at3-20-2-sku-16322000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 19 teeth for belt width 6mm 16 AT3/19-2 SKU: 16321900](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-19-teeth-for-belt-width-6mm-16-at3-19-2-sku-16321900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 18 teeth for belt width 6mm 16 AT3/18-2 SKU: 16321800](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-18-teeth-for-belt-width-6mm-16-at3-18-2-sku-16321800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 17 teeth for belt width 6 mm 16 AT3/17-2 SKU: 16321700](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-17-teeth-for-belt-width-6-mm-16-at3-17-2-sku-16321700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 16 teeth for belt width 6mm 16 AT3/16-2 SKU: 16321600](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-16-teeth-for-belt-width-6mm-16-at3-16-2-sku-16321600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT3 material aluminium 15 teeth for belt width 6mm 16 AT3/15-2 SKU: 16321500](https://maedler.in/product/timing-belt-pulley-at3-material-aluminium-15-teeth-for-belt-width-6mm-16-at3-15-2-sku-16321500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [timing bar T5 60 teeth length 160mm material 1.4305 SKU: 16299960](https://maedler.in/product/timing-bar-t5-60-teeth-length-160mm-material-1-4305-sku-16299960/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 50 teeth length 160mm material 1.4305 SKU: 16299950](https://maedler.in/product/timing-bar-t5-50-teeth-length-160mm-material-1-4305-sku-16299950/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 48 teeth length 160mm material 1.4305 SKU: 16299948](https://maedler.in/product/timing-bar-t5-48-teeth-length-160mm-material-1-4305-sku-16299948/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 40 teeth length 160mm material 1.4305 SKU: 16299940](https://maedler.in/product/timing-bar-t5-40-teeth-length-160mm-material-1-4305-sku-16299940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 36 teeth length 160mm material 1.4305 SKU: 16299936](https://maedler.in/product/timing-bar-t5-36-teeth-length-160mm-material-1-4305-sku-16299936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 32 teeth length 160mm material 1.4305 SKU: 16299932](https://maedler.in/product/timing-bar-t5-32-teeth-length-160mm-material-1-4305-sku-16299932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 30 teeth length 160mm material 1.4305 SKU: 16299930](https://maedler.in/product/timing-bar-t5-30-teeth-length-160mm-material-1-4305-sku-16299930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 25 teeth length 160mm material 1.4305 SKU: 16299925](https://maedler.in/product/timing-bar-t5-25-teeth-length-160mm-material-1-4305-sku-16299925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 24 teeth length 160mm material 1.4305 SKU: 16299924](https://maedler.in/product/timing-bar-t5-24-teeth-length-160mm-material-1-4305-sku-16299924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 20 teeth length 160mm material 1.4305 SKU: 16299920](https://maedler.in/product/timing-bar-t5-20-teeth-length-160mm-material-1-4305-sku-16299920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 18 teeth length 140mm material 1.4305 SKU: 16299918](https://maedler.in/product/timing-bar-t5-18-teeth-length-140mm-material-1-4305-sku-16299918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 16 teeth length 140mm material 1.4305 SKU: 16299916](https://maedler.in/product/timing-bar-t5-16-teeth-length-140mm-material-1-4305-sku-16299916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 15 teeth length 140mm material 1.4305 SKU: 16299915](https://maedler.in/product/timing-bar-t5-15-teeth-length-140mm-material-1-4305-sku-16299915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 12 teeth length 140mm material 1.4305 SKU: 16299912](https://maedler.in/product/timing-bar-t5-12-teeth-length-140mm-material-1-4305-sku-16299912/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T5 100 teeth length 160mm material aluminium SKU: 16299900](https://maedler.in/product/timing-bar-t5-100-teeth-length-160mm-material-aluminium-sku-16299900/): Material: Aluminium similar EN AW2017A. - [timing bar T5 96 teeth length 160mm material aluminium SKU: 16299600](https://maedler.in/product/timing-bar-t5-96-teeth-length-160mm-material-aluminium-sku-16299600/): Material: Aluminium similar EN AW2017A. - [timing bar T5 90 teeth length 160mm material aluminium SKU: 16299000](https://maedler.in/product/timing-bar-t5-90-teeth-length-160mm-material-aluminium-sku-16299000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 84 teeth length 160mm material aluminium SKU: 16298400](https://maedler.in/product/timing-bar-t5-84-teeth-length-160mm-material-aluminium-sku-16298400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 80 teeth length 160mm material aluminium SKU: 16298000](https://maedler.in/product/timing-bar-t5-80-teeth-length-160mm-material-aluminium-sku-16298000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 72 teeth length 160mm material aluminium SKU: 16297200](https://maedler.in/product/timing-bar-t5-72-teeth-length-160mm-material-aluminium-sku-16297200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 65 teeth length 160mm material aluminium SKU: 16296500](https://maedler.in/product/timing-bar-t5-65-teeth-length-160mm-material-aluminium-sku-16296500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 60 teeth length 160mm material aluminium SKU: 16296000](https://maedler.in/product/timing-bar-t5-60-teeth-length-160mm-material-aluminium-sku-16296000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 50 teeth length 160mm material aluminium SKU: 16295000](https://maedler.in/product/timing-bar-t5-50-teeth-length-160mm-material-aluminium-sku-16295000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 48 teeth length 160mm material aluminium SKU: 16294800](https://maedler.in/product/timing-bar-t5-48-teeth-length-160mm-material-aluminium-sku-16294800/): Material: Aluminium similar EN AW2017A. - [timing bar T5 46 teeth length 160mm material aluminium SKU: 16294600](https://maedler.in/product/timing-bar-t5-46-teeth-length-160mm-material-aluminium-sku-16294600/): Material: Aluminium similar EN AW2017A. - [timing bar T5 45 teeth length 160mm material aluminium SKU: 16294500](https://maedler.in/product/timing-bar-t5-45-teeth-length-160mm-material-aluminium-sku-16294500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 44 teeth length 160mm material aluminium SKU: 16294400](https://maedler.in/product/timing-bar-t5-44-teeth-length-160mm-material-aluminium-sku-16294400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 42 teeth length 160mm material aluminium SKU: 16294200](https://maedler.in/product/timing-bar-t5-42-teeth-length-160mm-material-aluminium-sku-16294200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 40 teeth length 160mm material aluminium SKU: 16294000](https://maedler.in/product/timing-bar-t5-40-teeth-length-160mm-material-aluminium-sku-16294000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 38 teeth length 160mm material aluminium SKU: 16293800](https://maedler.in/product/timing-bar-t5-38-teeth-length-160mm-material-aluminium-sku-16293800/): Material: Aluminium similar EN AW2017A. - [timing bar T5 37 teeth length 160mm material aluminium SKU: 16293700](https://maedler.in/product/timing-bar-t5-37-teeth-length-160mm-material-aluminium-sku-16293700/): Material: Aluminium similar EN AW2017A. - [timing bar T5 36 teeth length 160mm material aluminium SKU: 16293600](https://maedler.in/product/timing-bar-t5-36-teeth-length-160mm-material-aluminium-sku-16293600/): Material: Aluminium similar EN AW2017A. - [timing bar T5 35 teeth length 160mm material aluminium SKU: 16293500](https://maedler.in/product/timing-bar-t5-35-teeth-length-160mm-material-aluminium-sku-16293500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 34 teeth length 160mm material aluminium SKU: 16293400](https://maedler.in/product/timing-bar-t5-34-teeth-length-160mm-material-aluminium-sku-16293400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 32 teeth length 160mm material aluminium SKU: 16293200](https://maedler.in/product/timing-bar-t5-32-teeth-length-160mm-material-aluminium-sku-16293200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 30 teeth length 160mm material aluminium SKU: 16293000](https://maedler.in/product/timing-bar-t5-30-teeth-length-160mm-material-aluminium-sku-16293000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 29 teeth length 160mm material aluminium SKU: 16292900](https://maedler.in/product/timing-bar-t5-29-teeth-length-160mm-material-aluminium-sku-16292900/): Material: Aluminium similar EN AW2017A. - [timing bar T5 28 teeth length 160mm material aluminium SKU: 16292800](https://maedler.in/product/timing-bar-t5-28-teeth-length-160mm-material-aluminium-sku-16292800/): Material: Aluminium similar EN AW2017A. - [timing bar T5 27 teeth length 160mm material aluminium SKU: 16292700](https://maedler.in/product/timing-bar-t5-27-teeth-length-160mm-material-aluminium-sku-16292700/): Material: Aluminium similar EN AW2017A. - [timing bar T5 26 teeth length 160mm material aluminium SKU: 16292600](https://maedler.in/product/timing-bar-t5-26-teeth-length-160mm-material-aluminium-sku-16292600/): Material: Aluminium similar EN AW2017A. - [timing bar T5 25 teeth length 160mm material aluminium SKU: 16292500](https://maedler.in/product/timing-bar-t5-25-teeth-length-160mm-material-aluminium-sku-16292500/): Material: Aluminium similar EN AW2017A. - [timing bar T5 24 teeth length 160mm material aluminium SKU: 16292400](https://maedler.in/product/timing-bar-t5-24-teeth-length-160mm-material-aluminium-sku-16292400/): Material: Aluminium similar EN AW2017A. - [timing bar T5 23 teeth length 160mm material aluminium SKU: 16292300](https://maedler.in/product/timing-bar-t5-23-teeth-length-160mm-material-aluminium-sku-16292300/): Material: Aluminium similar EN AW2017A. - [timing bar T5 22 teeth length 160mm material aluminium SKU: 16292200](https://maedler.in/product/timing-bar-t5-22-teeth-length-160mm-material-aluminium-sku-16292200/): Material: Aluminium similar EN AW2017A. - [timing bar T5 21 teeth length 160mm material aluminium SKU: 16292100](https://maedler.in/product/timing-bar-t5-21-teeth-length-160mm-material-aluminium-sku-16292100/): Material: Aluminium similar EN AW2017A. - [timing bar T5 20 teeth length 160mm material aluminium SKU: 16292000](https://maedler.in/product/timing-bar-t5-20-teeth-length-160mm-material-aluminium-sku-16292000/): Material: Aluminium similar EN AW2017A. - [timing bar T5 19 teeth length 140mm material aluminium SKU: 16291900](https://maedler.in/product/timing-bar-t5-19-teeth-length-140mm-material-aluminium-sku-16291900/): Material: Aluminium similar EN AW2017A. - [timing bar T5 18 teeth length 140mm material aluminium SKU: 16291800](https://maedler.in/product/timing-bar-t5-18-teeth-length-140mm-material-aluminium-sku-16291800/): Material: Aluminium similar EN AW2017A. - [timing bar T5 17 teeth length 140mm material aluminium SKU: 16291700](https://maedler.in/product/timing-bar-t5-17-teeth-length-140mm-material-aluminium-sku-16291700/): Material: Aluminium similar EN AW2017A. - [timing bar T5 16 teeth length 140mm material aluminium SKU: 16291600](https://maedler.in/product/timing-bar-t5-16-teeth-length-140mm-material-aluminium-sku-16291600/): Material: Aluminium similar EN AW2017A. - [Lubricator SF05 High temp./high pressure (Actual safety data sheet on the internet in the section Downloads) SKU: 68050005](https://maedler.in/product/lubricator-sf05-high-temp-high-pressure-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68050005/): Material: Housing made from steel sheet. The code for the lubricant contained is stamped into the bottom of the housing (e.g. SF 01 = all-purpose grease). The activator screw has to be ordered seperately. Function: Tightening the activating screw makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricant is continuously injected into the lubrication point. When the lubrication cartridge is empty, the coloured piston becomes clearly visible. The initial delay between activation and the first discharge of lubricant depends on the perma® type. Lubricant volume 120 cm3. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. Safety Data Sheets in the section Downloads. - [Lubricator SF04 High performance grease (Actual safety data sheet on the internet in the section Downloads) SKU: 68050004](https://maedler.in/product/lubricator-sf04-high-performance-grease-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68050004/): Material: Housing made from steel sheet. The code for the lubricant contained is stamped into the bottom of the housing (e.g. SF 01 = all-purpose grease). The activator screw has to be ordered seperately. Function: Tightening the activating screw makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricant is continuously injected into the lubrication point. When the lubrication cartridge is empty, the coloured piston becomes clearly visible. The initial delay between activation and the first discharge of lubricant depends on the perma® type. Lubricant volume 120 cm3. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. Safety Data Sheets in the section Downloads. - [Lubricator SF02 Extreme pressure grease (Actual safety data sheet on the internet in the section Downloads) SKU: 68050002](https://maedler.in/product/lubricator-sf02-extreme-pressure-grease-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68050002/): Material: Housing made from steel sheet. The code for the lubricant contained is stamped into the bottom of the housing (e.g. SF 01 = all-purpose grease). The activator screw has to be ordered seperately. Function: Tightening the activating screw makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricant is continuously injected into the lubrication point. When the lubrication cartridge is empty, the coloured piston becomes clearly visible. The initial delay between activation and the first discharge of lubricant depends on the perma® type. Lubricant volume 120 cm3. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. Safety Data Sheets in the section Downloads. - [Lubricator SF01 Multipurpose grease (Actual safety data sheet on the internet in the section Downloads) SKU: 68050001](https://maedler.in/product/lubricator-sf01-multipurpose-grease-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68050001/): Material: Housing made from steel sheet. The code for the lubricant contained is stamped into the bottom of the housing (e.g. SF 01 = all-purpose grease). The activator screw has to be ordered seperately. Function: Tightening the activating screw makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricant is continuously injected into the lubrication point. When the lubrication cartridge is empty, the coloured piston becomes clearly visible. The initial delay between activation and the first discharge of lubricant depends on the perma® type. Lubricant volume 120 cm3. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. Safety Data Sheets in the section Downloads. - [Electric drip-feed oiler ELO 24V DC capacity 3000ml SKU: 68033700](https://maedler.in/product/electric-drip-feed-oiler-elo-24v-dc-capacity-3000ml-sku-68033700/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 24V DC capacity 2000ml SKU: 68033600](https://maedler.in/product/electric-drip-feed-oiler-elo-24v-dc-capacity-2000ml-sku-68033600/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 24V DC capacity 1000ml SKU: 68033500](https://maedler.in/product/electric-drip-feed-oiler-elo-24v-dc-capacity-1000ml-sku-68033500/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 24V DC capacity 500ml SKU: 68033400](https://maedler.in/product/electric-drip-feed-oiler-elo-24v-dc-capacity-500ml-sku-68033400/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 24V DC capacity 200ml SKU: 68033200](https://maedler.in/product/electric-drip-feed-oiler-elo-24v-dc-capacity-200ml-sku-68033200/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 24V DC capacity 140ml SKU: 68033100](https://maedler.in/product/electric-drip-feed-oiler-elo-24v-dc-capacity-140ml-sku-68033100/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Spare glass for drip feed oiler ELO diameter 150mm x 180mm long SKU: 68032200](https://maedler.in/product/spare-glass-for-drip-feed-oiler-elo-diameter-150mm-x-180mm-long-sku-68032200/): Material: Cylinder made from acrylic glass.. - [Spare glass for drip feed oiler ELO diameter 133mm x 150mm long SKU: 68032100](https://maedler.in/product/spare-glass-for-drip-feed-oiler-elo-diameter-133mm-x-150mm-long-sku-68032100/): Material: Cylinder made from acrylic glass.. - [Electric drip-feed oiler ELO 230V 50Hz capacity 3000ml SKU: 68030700](https://maedler.in/product/electric-drip-feed-oiler-elo-230v-50hz-capacity-3000ml-sku-68030700/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 230V 50Hz capacity 2000ml SKU: 68030600](https://maedler.in/product/electric-drip-feed-oiler-elo-230v-50hz-capacity-2000ml-sku-68030600/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 230V 50Hz capacity 1000ml SKU: 68030500](https://maedler.in/product/electric-drip-feed-oiler-elo-230v-50hz-capacity-1000ml-sku-68030500/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 230V 50Hz capacity 500ml SKU: 68030400](https://maedler.in/product/electric-drip-feed-oiler-elo-230v-50hz-capacity-500ml-sku-68030400/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 230V 50Hz capacity 200ml SKU: 68030200](https://maedler.in/product/electric-drip-feed-oiler-elo-230v-50hz-capacity-200ml-sku-68030200/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Electric drip-feed oiler ELO 230V 50Hz capacity 140ml SKU: 68030100](https://maedler.in/product/electric-drip-feed-oiler-elo-230v-50hz-capacity-140ml-sku-68030100/): Material: Brass nickel-plated. Cylinder made from acrylic glass. Voltage: On choice: 230V AC, 50Hz, or 24V DC. Drip rate normal: about 45 drops per 1 ml. Other than the manual drip-feed oiler, which also drips when the machine has stopped, the electric drip-feed oiler only drips as long as the machine is running. When the machine stops, the electric drip-feed oiler is also automatically shut off, as the oiler is controlled via the machine programme. Finest dosing of drops is possible - by turning a knurled nut at the top part of the oiler. Almost all liquids can be dosed drop by drop, provided they are not mixed with solid matters. It is also suited for other media, provided they do not thicken with heat. Attention must be paid to the compatibility with acrylic glass and buna N used as sealing material. (possibly natural glass and vitone sealings on request). Duty cycle: intermittent 20%. Protection class acc. to EN 60529: IP20. Power consumption: 12VA (12W). - [Spare glass for drip feed oiler UNI and ELO diameter 100mm x 120mm long SKU: 68022000](https://maedler.in/product/spare-glass-for-drip-feed-oiler-uni-and-elo-diameter-100mm-x-120mm-long-sku-68022000/): Material: Cylinder made from acrylic glass.. - [Spare glass for drip feed oiler UNI and ELO diameter 80mm x 100mm long SKU: 68021900](https://maedler.in/product/spare-glass-for-drip-feed-oiler-uni-and-elo-diameter-80mm-x-100mm-long-sku-68021900/): Material: Cylinder made from acrylic glass.. - [Spare glass for drip feed oiler UNI diameter 30mm x 30mm long SKU: 68021300](https://maedler.in/product/spare-glass-for-drip-feed-oiler-uni-diameter-30mm-x-30mm-long-sku-68021300/): Material: Cylinder made from acrylic glass.. - [Spare glass for drip feed oiler UNI diameter 25mm x 25mm long SKU: 68021200](https://maedler.in/product/spare-glass-for-drip-feed-oiler-uni-diameter-25mm-x-25mm-long-sku-68021200/): Material: Cylinder made from acrylic glass.. - [Drip feed oiler UNI drip dosing at the top capacity 1000 ml thread G 1/2" SKU: 68020900](https://maedler.in/product/drip-feed-oiler-uni-drip-dosing-at-the-top-capacity-1000-ml-thread-g-1-2-sku-68020900/): Material: Brass, nickel-plated. Cylinder made from acrylic glass..Drip rate can be precisely adjusted, instantaneous shutting off, stainless valve needle (brass).Version 1: with screwed filler capVersion 2: large filler spout with dust cover. - [Drip feed oiler UNI drip dosing at the top capacity 500 ml thread G 1/2" SKU: 68020800](https://maedler.in/product/drip-feed-oiler-uni-drip-dosing-at-the-top-capacity-500-ml-thread-g-1-2-sku-68020800/): Material: Brass, nickel-plated. Cylinder made from acrylic glass..Drip rate can be precisely adjusted, instantaneous shutting off, stainless valve needle (brass).Version 1: with screwed filler capVersion 2: large filler spout with dust cover. - [Drip feed oiler UNI drip dosing at the top capacity 200 ml thread G 1/4" SKU: 68020700](https://maedler.in/product/drip-feed-oiler-uni-drip-dosing-at-the-top-capacity-200-ml-thread-g-1-4-sku-68020700/): Material: Brass, nickel-plated. Cylinder made from acrylic glass..Drip rate can be precisely adjusted, instantaneous shutting off, stainless valve needle (brass).Version 1: with screwed filler capVersion 2: large filler spout with dust cover. - [Drip feed oiler UNI drip dosing at the top capacity 140 ml thread G 1/4" SKU: 68020600](https://maedler.in/product/drip-feed-oiler-uni-drip-dosing-at-the-top-capacity-140-ml-thread-g-1-4-sku-68020600/): Material: Brass, nickel-plated. Cylinder made from acrylic glass..Drip rate can be precisely adjusted, instantaneous shutting off, stainless valve needle (brass).Version 1: with screwed filler capVersion 2: large filler spout with dust cover. - [Drip feed oiler UNI drip dosing at the top capacity 84 ml thread G 1/4" SKU: 68020500](https://maedler.in/product/drip-feed-oiler-uni-drip-dosing-at-the-top-capacity-84-ml-thread-g-1-4-sku-68020500/): Material: Brass, nickel-plated. Cylinder made from acrylic glass.. Drip rate can be precisely adjusted, instantaneous shutting off, stainless valve needle (brass). Version 1: with screwed filler cap Version 2: large filler spout with dust cover. - [Drip feed oiler UNI drip dosing at the top capacity 36 ml thread G 1/4" SKU: 68020400](https://maedler.in/product/drip-feed-oiler-uni-drip-dosing-at-the-top-capacity-36-ml-thread-g-1-4-sku-68020400/): Material: Brass, nickel-plated. Cylinder made from acrylic glass..Drip rate can be precisely adjusted, instantaneous shutting off, stainless valve needle (brass).Version 1: with screwed filler capVersion 2: large filler spout with dust cover. - [Drip feed oiler UNI drip dosing at the top capacity 20 ml thread G 1/8" with screwed filler cap SKU: 68020300](https://maedler.in/product/drip-feed-oiler-uni-drip-dosing-at-the-top-capacity-20-ml-thread-g-1-8-with-screwed-filler-cap-sku-68020300/): Material: Brass, nickel-plated. Cylinder made from acrylic glass..Drip rate can be precisely adjusted, instantaneous shutting off, stainless valve needle (brass).Version 1: with screwed filler capVersion 2: large filler spout with dust cover. - [Drip feed oiler UNI drip dosing at the top capacity 10 ml thread G 1/8" with screwed filler cap SKU: 68020200](https://maedler.in/product/drip-feed-oiler-uni-drip-dosing-at-the-top-capacity-10-ml-thread-g-1-8-with-screwed-filler-cap-sku-68020200/): Material: Brass, nickel-plated. Cylinder made from acrylic glass..Drip rate can be precisely adjusted, instantaneous shutting off, stainless valve needle (brass).Version 1: with screwed filler capVersion 2: large filler spout with dust cover. - [Spare glass for drip feed oiler UNI diameter 60mm x 80mm long SKU: 68011800](https://maedler.in/product/spare-glass-for-drip-feed-oiler-uni-diameter-60mm-x-80mm-long-sku-68011800/): Material: Cylinder made from acrylic glass.. - [Spare glass for drip feed oiler UNI diameter 60mm x 60mm long SKU: 68011700](https://maedler.in/product/spare-glass-for-drip-feed-oiler-uni-diameter-60mm-x-60mm-long-sku-68011700/): Material: Cylinder made from acrylic glass.. - [Spare glass for drip feed oiler UNI diameter 50mm x 50mm long SKU: 68011500](https://maedler.in/product/spare-glass-for-drip-feed-oiler-uni-diameter-50mm-x-50mm-long-sku-68011500/): Material: Cylinder made from acrylic glass.. - [Spare glass for drip feed oiler UNI diameter 40mm x 40mm long SKU: 68011300](https://maedler.in/product/spare-glass-for-drip-feed-oiler-uni-diameter-40mm-x-40mm-long-sku-68011300/): Material: Cylinder made from acrylic glass.. - [Stauffer grease box DIN 3411 size 6 material steel SKU: 68000600](https://maedler.in/product/stauffer-grease-box-din-3411-size-6-material-steel-sku-68000600/): Material: Steel, blued. Top and bottom part drawn, with rolled spigot screw thread. - [Stauffer grease box DIN 3411 size 5 material steel SKU: 68000500](https://maedler.in/product/stauffer-grease-box-din-3411-size-5-material-steel-sku-68000500/): Material: Steel, blued. Top and bottom part drawn, with rolled spigot screw thread. - [Stauffer grease box DIN 3411 size 4 material steel SKU: 68000400](https://maedler.in/product/stauffer-grease-box-din-3411-size-4-material-steel-sku-68000400/): Material: Steel, blued. Top and bottom part drawn, with rolled spigot screw thread. - [Stauffer grease box DIN 3411 size 3 material steel SKU: 68000300](https://maedler.in/product/stauffer-grease-box-din-3411-size-3-material-steel-sku-68000300/): Material: Steel, blued. Top and bottom part drawn, with rolled spigot screw thread. - [Stauffer grease box DIN 3411 size 2 material steel SKU: 68000200](https://maedler.in/product/stauffer-grease-box-din-3411-size-2-material-steel-sku-68000200/): Material: Steel, blued. Top and bottom part drawn, with rolled spigot screw thread. - [Stauffer grease box DIN 3411 size 1 material steel SKU: 68000100](https://maedler.in/product/stauffer-grease-box-din-3411-size-1-material-steel-sku-68000100/): Material: Steel, blued. Top and bottom part drawn, with rolled spigot screw thread. - [Hinge M437 zinc die casting, silver plastic coating, adjustable friction, 60x60mm SKU: 67700463](https://maedler.in/product/hinge-m437-zinc-die-casting-silver-plastic-coating-adjustable-friction-60x60mm-sku-67700463/): Material: Zinc die cast, plastic coated, matt texture finish, black RAL 9005 or silver RAL 9006. Friction cone: Polyacetal POM. Adjusting screw / threaded bushing: Steel zinc-plated. The agility of the non-detachable hinge can be adjusted by a setscrew. Two cones with large friction face create an adjustable torque. This hinge is free of axial clearance and offers a long service life with almost consistently stiffness. Bores for countersunk screws DIN 7991. Temperature resistant up to +80 °C. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M437 zinc die casting, silver plastic coating, adjustable friction, 50x50mm SKU: 67700462](https://maedler.in/product/hinge-m437-zinc-die-casting-silver-plastic-coating-adjustable-friction-50x50mm-sku-67700462/): Material: Zinc die cast, plastic coated, matt texture finish, black RAL 9005 or silver RAL 9006. Friction cone: Polyacetal POM. Adjusting screw / threaded bushing: Steel zinc-plated. The agility of the non-detachable hinge can be adjusted by a setscrew. Two cones with large friction face create an adjustable torque. This hinge is free of axial clearance and offers a long service life with almost consistently stiffness. Bores for countersunk screws DIN 7991. Temperature resistant up to +80 °C. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M437 zinc die casting, silver plastic coating, adjustable friction, 40x40mm SKU: 67700461](https://maedler.in/product/hinge-m437-zinc-die-casting-silver-plastic-coating-adjustable-friction-40x40mm-sku-67700461/): Material: Zinc die cast, plastic coated, matt texture finish, black RAL 9005 or silver RAL 9006. Friction cone: Polyacetal POM. Adjusting screw / threaded bushing: Steel zinc-plated. The agility of the non-detachable hinge can be adjusted by a setscrew. Two cones with large friction face create an adjustable torque. This hinge is free of axial clearance and offers a long service life with almost consistently stiffness. Bores for countersunk screws DIN 7991. Temperature resistant up to +80 °C. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M437 zinc die casting, black plastic coating, adjustable friction, 60x60mm SKU: 67700453](https://maedler.in/product/hinge-m437-zinc-die-casting-black-plastic-coating-adjustable-friction-60x60mm-sku-67700453/): Material: Zinc die cast, plastic coated, matt texture finish, black RAL 9005 or silver RAL 9006. Friction cone: Polyacetal POM. Adjusting screw / threaded bushing: Steel zinc-plated. The agility of the non-detachable hinge can be adjusted by a setscrew. Two cones with large friction face create an adjustable torque. This hinge is free of axial clearance and offers a long service life with almost consistently stiffness. Bores for countersunk screws DIN 7991. Temperature resistant up to +80 °C. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M437 zinc die casting, black plastic coating, adjustable friction, 50x50mm SKU: 67700452](https://maedler.in/product/hinge-m437-zinc-die-casting-black-plastic-coating-adjustable-friction-50x50mm-sku-67700452/): Material: Zinc die cast, plastic coated, matt texture finish, black RAL 9005 or silver RAL 9006. Friction cone: Polyacetal POM. Adjusting screw / threaded bushing: Steel zinc-plated. The agility of the non-detachable hinge can be adjusted by a setscrew. Two cones with large friction face create an adjustable torque. This hinge is free of axial clearance and offers a long service life with almost consistently stiffness. Bores for countersunk screws DIN 7991. Temperature resistant up to +80 °C. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M437 zinc die casting, black plastic coating, adjustable friction, 40x40mm SKU: 67700451](https://maedler.in/product/hinge-m437-zinc-die-casting-black-plastic-coating-adjustable-friction-40x40mm-sku-67700451/): Material: Zinc die cast, plastic coated, matt texture finish, black RAL 9005 or silver RAL 9006. Friction cone: Polyacetal POM. Adjusting screw / threaded bushing: Steel zinc-plated. The agility of the non-detachable hinge can be adjusted by a setscrew. Two cones with large friction face create an adjustable torque. This hinge is free of axial clearance and offers a long service life with almost consistently stiffness. Bores for countersunk screws DIN 7991. Temperature resistant up to +80 °C. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 stainless steel 1.4308, detachable, type R, 60x60mm SKU: 67700436](https://maedler.in/product/hinge-m337-stainless-steel-1-4308-detachable-type-r-60x60mm-sku-67700436/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4305 (AISI 303). Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 stainless steel 1.4308, detachable, type L, 60x60mm SKU: 67700435](https://maedler.in/product/hinge-m337-stainless-steel-1-4308-detachable-type-l-60x60mm-sku-67700435/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4305 (AISI 303). Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 stainless steel 1.4308, detachable, type R, 50x50mm SKU: 67700434](https://maedler.in/product/hinge-m337-stainless-steel-1-4308-detachable-type-r-50x50mm-sku-67700434/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4305 (AISI 303). Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 stainless steel 1.4308, detachable, type L, 50x50mm SKU: 67700433](https://maedler.in/product/hinge-m337-stainless-steel-1-4308-detachable-type-l-50x50mm-sku-67700433/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4305 (AISI 303). Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 stainless steel 1.4308, detachable, type R, 40x40mm SKU: 67700432](https://maedler.in/product/hinge-m337-stainless-steel-1-4308-detachable-type-r-40x40mm-sku-67700432/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4305 (AISI 303). Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 stainless steel 1.4308, detachable, type L, 40x40mm SKU: 67700431](https://maedler.in/product/hinge-m337-stainless-steel-1-4308-detachable-type-l-40x40mm-sku-67700431/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4305 (AISI 303). Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 zinc die casting, detachable, type R, 60x60mm SKU: 67700416](https://maedler.in/product/hinge-m337-zinc-die-casting-detachable-type-r-60x60mm-sku-67700416/): Material: Zinc die cast, plastic coated black RAL 9005, matt texture finish. Pin: Stainless steel 1.4305. Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 zinc die casting, detachable, type L, 60x60mm SKU: 67700415](https://maedler.in/product/hinge-m337-zinc-die-casting-detachable-type-l-60x60mm-sku-67700415/): Material: Zinc die cast, plastic coated black RAL 9005, matt texture finish. Pin: Stainless steel 1.4305. Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 zinc die casting, detachable, type R, 50x50mm SKU: 67700414](https://maedler.in/product/hinge-m337-zinc-die-casting-detachable-type-r-50x50mm-sku-67700414/): Material: Zinc die cast, plastic coated black RAL 9005, matt texture finish. Pin: Stainless steel 1.4305. Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 zinc die casting, detachable, type L, 50x50mm SKU: 67700413](https://maedler.in/product/hinge-m337-zinc-die-casting-detachable-type-l-50x50mm-sku-67700413/): Material: Zinc die cast, plastic coated black RAL 9005, matt texture finish. Pin: Stainless steel 1.4305. Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 zinc die casting, detachable, type R, 40x40mm SKU: 67700412](https://maedler.in/product/hinge-m337-zinc-die-casting-detachable-type-r-40x40mm-sku-67700412/): Material: Zinc die cast, plastic coated black RAL 9005, matt texture finish. Pin: Stainless steel 1.4305. Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M337 zinc die casting, detachable, type L, 40x40mm SKU: 67700411](https://maedler.in/product/hinge-m337-zinc-die-casting-detachable-type-l-40x40mm-sku-67700411/): Material: Zinc die cast, plastic coated black RAL 9005, matt texture finish. Pin: Stainless steel 1.4305. Detachable hinges with sliding disc from plastic. Before mounting, the pin should be lightly greased. With bores for countersunk screws DIN 7991. Type L: for installation at the left side. Type R: for installation at the right side. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M238 zinc die casting, adjustable, 60x60mm SKU: 67700403](https://maedler.in/product/hinge-m238-zinc-die-casting-adjustable-60x60mm-sku-67700403/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Plastic cover balck-grey. Pin: Stainless steel 1.4305. Adjusting discs: Steel, hardened. These adjustable, non-detachable hinges allow a very precise positioning of the door or cover. The adjusting discs have a cutting ring at the bottom, which cuts into the ribs of die cast zinc-wing when tightening the countersunk screw. That prevents an unintentional move after assembly. The screws are covered by a perfectly fitting lid. Type B: adjustable in both directions. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M238 zinc die casting, adjustable, 50x50mm SKU: 67700402](https://maedler.in/product/hinge-m238-zinc-die-casting-adjustable-50x50mm-sku-67700402/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Plastic cover balck-grey. Pin: Stainless steel 1.4305. Adjusting discs: Steel, hardened. These adjustable, non-detachable hinges allow a very precise positioning of the door or cover. The adjusting discs have a cutting ring at the bottom, which cuts into the ribs of die cast zinc-wing when tightening the countersunk screw. That prevents an unintentional move after assembly. The screws are covered by a perfectly fitting lid. Type B: adjustable in both directions. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M238 zinc die casting, adjustable, 42x42mm SKU: 67700401](https://maedler.in/product/hinge-m238-zinc-die-casting-adjustable-42x42mm-sku-67700401/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Plastic cover balck-grey. Pin: Stainless steel 1.4305. Adjusting discs: Steel, hardened. These adjustable, non-detachable hinges allow a very precise positioning of the door or cover. The adjusting discs have a cutting ring at the bottom, which cuts into the ribs of die cast zinc-wing when tightening the countersunk screw. That prevents an unintentional move after assembly. The screws are covered by a perfectly fitting lid. Type B: adjustable in both directions. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type C, 60x60mm SKU: 67700391](https://maedler.in/product/hinge-m237-plastic-type-c-60x60mm-sku-67700391/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type C, 50x50mm SKU: 67700390](https://maedler.in/product/hinge-m237-plastic-type-c-50x50mm-sku-67700390/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type C, 40x40mm SKU: 67700389](https://maedler.in/product/hinge-m237-plastic-type-c-40x40mm-sku-67700389/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type B, 60x60mm SKU: 67700388](https://maedler.in/product/hinge-m237-plastic-type-b-60x60mm-sku-67700388/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type B, 50x50mm SKU: 67700387](https://maedler.in/product/hinge-m237-plastic-type-b-50x50mm-sku-67700387/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type B, 40x40mm SKU: 67700386](https://maedler.in/product/hinge-m237-plastic-type-b-40x40mm-sku-67700386/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type B, 30x30mm SKU: 67700385](https://maedler.in/product/hinge-m237-plastic-type-b-30x30mm-sku-67700385/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type A, 60x60mm SKU: 67700384](https://maedler.in/product/hinge-m237-plastic-type-a-60x60mm-sku-67700384/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type A, 50x50mm SKU: 67700383](https://maedler.in/product/hinge-m237-plastic-type-a-50x50mm-sku-67700383/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type A, 40x40mm SKU: 67700382](https://maedler.in/product/hinge-m237-plastic-type-a-40x40mm-sku-67700382/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 plastic, type A, 30x30mm SKU: 67700381](https://maedler.in/product/hinge-m237-plastic-type-a-30x30mm-sku-67700381/): Material: Plastic Polyamid (PA), glass fibre reinforced, black matt. Pin: Stainless steel 1.4305. Threaded bolts: Steel zinc plated. Non-detachable, high quality plastic hinges. Type A: with 2 x 2 bores for countersunk screws. Type B: with 2 x 2 bores for cylindrical screw heads. Type C: with 2 x 2 threaded bolts. Temperature resistant up to +140 °C. 1) Fastening torque for thread d1. 2) Fastening torque for fitting screw in d2. 3) Max. axial force. 4) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type 2A, 120x60mm SKU: 67700366](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-2a-120x60mm-sku-67700366/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991. Type 1A: extended on one side, with sunkholes. Type 2A: extended on both sides, with sonkholes. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type 2A, 76x50mm SKU: 67700365](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-2a-76x50mm-sku-67700365/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991. Type 1A: extended on one side, with sunkholes. Type 2A: extended on both sides, with sonkholes. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type 1A, 90x60mm SKU: 67700362](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-1a-90x60mm-sku-67700362/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991. Type 1A: extended on one side, with sunkholes. Type 2A: extended on both sides, with sonkholes. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type 1A, 63x50mm SKU: 67700361](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-1a-63x50mm-sku-67700361/): Material: Stainless steel 1.4308 (CF-8), matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991. Type 1A: extended on one side, with sunkholes. Type 2A: extended on both sides, with sonkholes. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 zinc die casting, type 2C, 120x60mm SKU: 67700358](https://maedler.in/product/hinge-m237-zinc-die-casting-type-2c-120x60mm-sku-67700358/): Material: Zinc die cast, plastic coated, black, textured finish. Pin: Stainless steel 1.4305. Threaded bolts (type C): Stainless steel 1.4401 This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991 (Type A) or threaded bolts (Type C). Type 1A: extended on one side, with sunkholes. Type 1C: extended on one side, with threaded bolts. Type 2A: extended on both sides, with sonkholes. Type 2C: extended on both sides, with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 zinc die casting, type 2C, 76x50mm SKU: 67700357](https://maedler.in/product/hinge-m237-zinc-die-casting-type-2c-76x50mm-sku-67700357/): Material: Zinc die cast, plastic coated, black, textured finish. Pin: Stainless steel 1.4305. Threaded bolts (type C): Stainless steel 1.4401 This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991 (Type A) or threaded bolts (Type C). Type 1A: extended on one side, with sunkholes. Type 1C: extended on one side, with threaded bolts. Type 2A: extended on both sides, with sonkholes. Type 2C: extended on both sides, with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 zinc die casting, type 2A, 120x60mm SKU: 67700356](https://maedler.in/product/hinge-m237-zinc-die-casting-type-2a-120x60mm-sku-67700356/): Material: Zinc die cast, plastic coated, black, textured finish. Pin: Stainless steel 1.4305. Threaded bolts (type C): Stainless steel 1.4401 This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991 (Type A) or threaded bolts (Type C). Type 1A: extended on one side, with sunkholes. Type 1C: extended on one side, with threaded bolts. Type 2A: extended on both sides, with sonkholes. Type 2C: extended on both sides, with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 zinc die casting, type 2A, 76x50mm SKU: 67700355](https://maedler.in/product/hinge-m237-zinc-die-casting-type-2a-76x50mm-sku-67700355/): Material: Zinc die cast, plastic coated, black, textured finish. Pin: Stainless steel 1.4305. Threaded bolts (type C): Stainless steel 1.4401 This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991 (Type A) or threaded bolts (Type C). Type 1A: extended on one side, with sunkholes. Type 1C: extended on one side, with threaded bolts. Type 2A: extended on both sides, with sonkholes. Type 2C: extended on both sides, with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 zinc die casting, type 1C, 90x60mm SKU: 67700354](https://maedler.in/product/hinge-m237-zinc-die-casting-type-1c-90x60mm-sku-67700354/): Material: Zinc die cast, plastic coated, black, textured finish. Pin: Stainless steel 1.4305. Threaded bolts (type C): Stainless steel 1.4401 This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991 (Type A) or threaded bolts (Type C). Type 1A: extended on one side, with sunkholes. Type 1C: extended on one side, with threaded bolts. Type 2A: extended on both sides, with sonkholes. Type 2C: extended on both sides, with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 zinc die casting, type 1C, 63x50mm SKU: 67700353](https://maedler.in/product/hinge-m237-zinc-die-casting-type-1c-63x50mm-sku-67700353/): Material: Zinc die cast, plastic coated, black, textured finish. Pin: Stainless steel 1.4305. Threaded bolts (type C): Stainless steel 1.4401 This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991 (Type A) or threaded bolts (Type C). Type 1A: extended on one side, with sunkholes. Type 1C: extended on one side, with threaded bolts. Type 2A: extended on both sides, with sonkholes. Type 2C: extended on both sides, with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 zinc die casting, type 1A, 90x60mm SKU: 67700352](https://maedler.in/product/hinge-m237-zinc-die-casting-type-1a-90x60mm-sku-67700352/): Material: Zinc die cast, plastic coated, black, textured finish. Pin: Stainless steel 1.4305. Threaded bolts (type C): Stainless steel 1.4401 This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991 (Type A) or threaded bolts (Type C). Type 1A: extended on one side, with sunkholes. Type 1C: extended on one side, with threaded bolts. Type 2A: extended on both sides, with sonkholes. Type 2C: extended on both sides, with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 zinc die casting, type 1A, 63x50mm SKU: 67700351](https://maedler.in/product/hinge-m237-zinc-die-casting-type-1a-63x50mm-sku-67700351/): Material: Zinc die cast, plastic coated, black, textured finish. Pin: Stainless steel 1.4305. Threaded bolts (type C): Stainless steel 1.4401 This non-detachable hinges are extended on one side (1) or two sides (2). With countersunk holes for screws DIN 7991 (Type A) or threaded bolts (Type C). Type 1A: extended on one side, with sunkholes. Type 1C: extended on one side, with threaded bolts. Type 2A: extended on both sides, with sonkholes. Type 2C: extended on both sides, with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4408, type A, 60x60mm SKU: 67700344](https://maedler.in/product/hinge-m237-stainless-steel-1-4408-type-a-60x60mm-sku-67700344/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4408, type A, 50x50mm SKU: 67700343](https://maedler.in/product/hinge-m237-stainless-steel-1-4408-type-a-50x50mm-sku-67700343/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4408, type A, 40x40mm SKU: 67700342](https://maedler.in/product/hinge-m237-stainless-steel-1-4408-type-a-40x40mm-sku-67700342/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4408, type A, 30x30mm SKU: 67700341](https://maedler.in/product/hinge-m237-stainless-steel-1-4408-type-a-30x30mm-sku-67700341/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type C, 60x60mm SKU: 67700337](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-c-60x60mm-sku-67700337/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type C, 50x50mm SKU: 67700336](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-c-50x50mm-sku-67700336/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type C, 40x40mm SKU: 67700335](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-c-40x40mm-sku-67700335/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type A, 60x60mm SKU: 67700334](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-a-60x60mm-sku-67700334/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type A, 50x50mm SKU: 67700333](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-a-50x50mm-sku-67700333/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type A, 40x40mm SKU: 67700332](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-a-40x40mm-sku-67700332/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 stainless steel 1.4308, type A, 30x30mm SKU: 67700331](https://maedler.in/product/hinge-m237-stainless-steel-1-4308-type-a-30x30mm-sku-67700331/): Material: Stainless steel 1.4308 (CF-8) matt blasted or Stainless steel 1.4408 (AISI 316). matt blasted. Pin: Stainless steel 1.4571 (AISI 316 Ti). Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Aluminium, type A, 60x60mm SKU: 67700324](https://maedler.in/product/hinge-m237-aluminium-type-a-60x60mm-sku-67700324/): Material: Aluminium, anodized in natural colour. Pin: Stainless steel 1.4571. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90°. With bores for countersunk screws DIN 7991. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Aluminium, type A, 50x50mm SKU: 67700323](https://maedler.in/product/hinge-m237-aluminium-type-a-50x50mm-sku-67700323/): Material: Aluminium, anodized in natural colour. Pin: Stainless steel 1.4571. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90°. With bores for countersunk screws DIN 7991. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Aluminium, type A, 40x40mm SKU: 67700322](https://maedler.in/product/hinge-m237-aluminium-type-a-40x40mm-sku-67700322/): Material: Aluminium, anodized in natural colour. Pin: Stainless steel 1.4571. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90°. With bores for countersunk screws DIN 7991. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Aluminium, type A, 30x30mm SKU: 67700321](https://maedler.in/product/hinge-m237-aluminium-type-a-30x30mm-sku-67700321/): Material: Aluminium, anodized in natural colour. Pin: Stainless steel 1.4571. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90°. With bores for countersunk screws DIN 7991. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Hinge M237 Zinc die casting, type C, 60x60mm SKU: 67700307](https://maedler.in/product/hinge-m237-zinc-die-casting-type-c-60x60mm-sku-67700307/): Material: Zinc die cast, plastic coated black RAL 9005, textured finish. Pin: 1.4305. Non-detachable hinges. The swivel range depends on the pivoting direction; 180° or 90° (type C 180° or 70°). Type A: with bores for countersunk screws DIN 7991. Type C: with threaded bolts. 1) Max. axial force. 2) Max. radial force at opening angle 90°. These are non-binding guide values without any liability. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 16mm 31 T10/15-2 SKU: 16421500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-16mm-31-t10-15-2-sku-16421500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 16mm 31 T10/14-2 SKU: 16421400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-16mm-31-t10-14-2-sku-16421400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 16 mm 31 T10/13-2 SKU: 16421300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-16-mm-31-t10-13-2-sku-16421300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 16mm 31 T10/12-2 SKU: 16421200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-16mm-31-t10-12-2-sku-16421200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 16 mm 31 T10/11-2 SKU: 16421100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-16-mm-31-t10-11-2-sku-16421100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 16 mm 31 T10/10-2 SKU: 16421000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-16-mm-31-t10-10-2-sku-16421000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 96 teeth for belt width 40mm 55 T10/96-0 SKU: 16419600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-96-teeth-for-belt-width-40mm-55-t10-96-0-sku-16419600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 84 teeth for belt width 40mm 55 T10/84-0 SKU: 16418400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-84-teeth-for-belt-width-40mm-55-t10-84-0-sku-16418400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 40mm 55 T10/72-0 SKU: 16417200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-40mm-55-t10-72-0-sku-16417200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 40mm 55 T10/60-0 SKU: 16416000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-40mm-55-t10-60-0-sku-16416000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 40mm 55 T10/48-0 SKU: 16414800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-40mm-55-t10-48-0-sku-16414800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 40mm 55 T10/44-0 SKU: 16414400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-40mm-55-t10-44-0-sku-16414400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 40mm 55 T10/40-2 SKU: 16414000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-40mm-55-t10-40-2-sku-16414000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 40mm 55 T10/36-2 SKU: 16413600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-40mm-55-t10-36-2-sku-16413600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 40mm 55 T10/32-2 SKU: 16413200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-40mm-55-t10-32-2-sku-16413200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 40mm 55 T10/30-2 SKU: 16413000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-40mm-55-t10-30-2-sku-16413000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 40mm 55 T10/28-2 SKU: 16412800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-40mm-55-t10-28-2-sku-16412800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 40mm 55 T10/27-2 SKU: 16412700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-40mm-55-t10-27-2-sku-16412700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 40mm 55 T10/26-2 SKU: 16412600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-40mm-55-t10-26-2-sku-16412600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 40mm 55 T10/25-2 SKU: 16412500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-40mm-55-t10-25-2-sku-16412500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 40mm 55 T10/24-2 SKU: 16412400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-40mm-55-t10-24-2-sku-16412400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 40mm 55 T10/22-2 SKU: 16412200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-40mm-55-t10-22-2-sku-16412200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 40mm 55 T10/20-2 SKU: 16412000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-40mm-55-t10-20-2-sku-16412000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 40mm 55 T10/19-2 SKU: 16411900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-40mm-55-t10-19-2-sku-16411900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 40mm 55 T10/18-2 SKU: 16411800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-40mm-55-t10-18-2-sku-16411800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 40mm 55 T10/17-2 SKU: 16411700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-40mm-55-t10-17-2-sku-16411700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 40mm 55 T10/16-2 SKU: 16411600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-40mm-55-t10-16-2-sku-16411600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 40mm 55 T10/15-2 SKU: 16411500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-40mm-55-t10-15-2-sku-16411500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 40mm 55 T10/14-2 SKU: 16411400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-40mm-55-t10-14-2-sku-16411400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 40mm 55 T10/13-2 SKU: 16411300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-40mm-55-t10-13-2-sku-16411300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 40mm 55 T10/12-2 SKU: 16411200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-40mm-55-t10-12-2-sku-16411200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 40mm 55 T10/11-2 SKU: 16411100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-40mm-55-t10-11-2-sku-16411100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 40mm 55 T10/10-2 SKU: 16411000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-40mm-55-t10-10-2-sku-16411000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [timing bar AT3 96 teeth length 160mm material aluminium SKU: 16399600](https://maedler.in/product/timing-bar-at3-96-teeth-length-160mm-material-aluminium-sku-16399600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 84 teeth length 160mm material aluminium SKU: 16398400](https://maedler.in/product/timing-bar-at3-84-teeth-length-160mm-material-aluminium-sku-16398400/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 72 teeth length 160mm material aluminium SKU: 16397200](https://maedler.in/product/timing-bar-at3-72-teeth-length-160mm-material-aluminium-sku-16397200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 70 teeth length 160mm material aluminium SKU: 16397000](https://maedler.in/product/timing-bar-at3-70-teeth-length-160mm-material-aluminium-sku-16397000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 65 teeth length 160mm material aluminium SKU: 16396500](https://maedler.in/product/timing-bar-at3-65-teeth-length-160mm-material-aluminium-sku-16396500/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 60 teeth length 160mm material aluminium SKU: 16396000](https://maedler.in/product/timing-bar-at3-60-teeth-length-160mm-material-aluminium-sku-16396000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 56 teeth length 160mm material aluminium SKU: 16395600](https://maedler.in/product/timing-bar-at3-56-teeth-length-160mm-material-aluminium-sku-16395600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 52 teeth length 160mm material aluminium SKU: 16395200](https://maedler.in/product/timing-bar-at3-52-teeth-length-160mm-material-aluminium-sku-16395200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 50 teeth length 160mm material aluminium SKU: 16395000](https://maedler.in/product/timing-bar-at3-50-teeth-length-160mm-material-aluminium-sku-16395000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 48 teeth length 160mm material aluminium SKU: 16394800](https://maedler.in/product/timing-bar-at3-48-teeth-length-160mm-material-aluminium-sku-16394800/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 44 teeth length 160mm material aluminium SKU: 16394400](https://maedler.in/product/timing-bar-at3-44-teeth-length-160mm-material-aluminium-sku-16394400/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 42 teeth length 160mm material aluminium SKU: 16394200](https://maedler.in/product/timing-bar-at3-42-teeth-length-160mm-material-aluminium-sku-16394200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 40 teeth length 160mm material aluminium SKU: 16394000](https://maedler.in/product/timing-bar-at3-40-teeth-length-160mm-material-aluminium-sku-16394000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 38 teeth length 160mm material aluminium SKU: 16393800](https://maedler.in/product/timing-bar-at3-38-teeth-length-160mm-material-aluminium-sku-16393800/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 36 teeth length 160mm material aluminium SKU: 16393600](https://maedler.in/product/timing-bar-at3-36-teeth-length-160mm-material-aluminium-sku-16393600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 35 teeth length 160mm material aluminium SKU: 16393500](https://maedler.in/product/timing-bar-at3-35-teeth-length-160mm-material-aluminium-sku-16393500/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 34 teeth length 160mm material aluminium SKU: 16393400](https://maedler.in/product/timing-bar-at3-34-teeth-length-160mm-material-aluminium-sku-16393400/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 32 teeth length 160mm material aluminium SKU: 16393200](https://maedler.in/product/timing-bar-at3-32-teeth-length-160mm-material-aluminium-sku-16393200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 30 teeth length 140mm material aluminium SKU: 16393000](https://maedler.in/product/timing-bar-at3-30-teeth-length-140mm-material-aluminium-sku-16393000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 28 teeth length 140mm material aluminium SKU: 16392800](https://maedler.in/product/timing-bar-at3-28-teeth-length-140mm-material-aluminium-sku-16392800/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 27 teeth length 140mm material aluminium SKU: 16392700](https://maedler.in/product/timing-bar-at3-27-teeth-length-140mm-material-aluminium-sku-16392700/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 26 teeth length 140mm material aluminium SKU: 16392600](https://maedler.in/product/timing-bar-at3-26-teeth-length-140mm-material-aluminium-sku-16392600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 25 teeth length 140mm material aluminium SKU: 16392500](https://maedler.in/product/timing-bar-at3-25-teeth-length-140mm-material-aluminium-sku-16392500/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 24 teeth length 140mm material aluminium SKU: 16392400](https://maedler.in/product/timing-bar-at3-24-teeth-length-140mm-material-aluminium-sku-16392400/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 23 teeth length 140mm material aluminium SKU: 16392300](https://maedler.in/product/timing-bar-at3-23-teeth-length-140mm-material-aluminium-sku-16392300/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 22 teeth length 140mm material aluminium SKU: 16392200](https://maedler.in/product/timing-bar-at3-22-teeth-length-140mm-material-aluminium-sku-16392200/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 21 teeth length 140mm material aluminium SKU: 16392100](https://maedler.in/product/timing-bar-at3-21-teeth-length-140mm-material-aluminium-sku-16392100/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 20 teeth length 140mm material aluminium SKU: 16392000](https://maedler.in/product/timing-bar-at3-20-teeth-length-140mm-material-aluminium-sku-16392000/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 19 teeth length 140mm material aluminium SKU: 16391900](https://maedler.in/product/timing-bar-at3-19-teeth-length-140mm-material-aluminium-sku-16391900/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 18 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 16391800](https://maedler.in/product/timing-bar-at3-18-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-16391800/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 17 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 16391700](https://maedler.in/product/timing-bar-at3-17-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-16391700/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 16 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 16391600](https://maedler.in/product/timing-bar-at3-16-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-16391600/): Material: Aluminium similar EN AW2017A. - [timing bar AT3 15 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 16391500](https://maedler.in/product/timing-bar-at3-15-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-16391500/): Material: Aluminium similar EN AW2017A. - [Polyurethane timing belt AT3 width 10mm Lw 1011mm 337 teeth 10AT3/1011 SKU: 16371900](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-1011mm-337-teeth-10at3-1011-sku-16371900/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 900mm 300 teeth 10AT3/900 SKU: 16371800](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-900mm-300-teeth-10at3-900-sku-16371800/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 816mm 272 teeth 6 AT3/816 SKU: 16371700](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-816mm-272-teeth-6-at3-816-sku-16371700/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 714mm 238 teeth 10AT3/714 SKU: 16371500](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-714mm-238-teeth-10at3-714-sku-16371500/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 639mm 213 teeth 10AT3/639 SKU: 16371400](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-639mm-213-teeth-10at3-639-sku-16371400/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 600mm 200 teeth 10AT3/600 SKU: 16371300](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-600mm-200-teeth-10at3-600-sku-16371300/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 549mm 183 teeth 10AT3/549 SKU: 16371200](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-549mm-183-teeth-10at3-549-sku-16371200/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 501mm 167 teeth 10AT3/501 SKU: 16371100](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-501mm-167-teeth-10at3-501-sku-16371100/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 450mm 150 teeth 10AT3/450 SKU: 16371000](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-450mm-150-teeth-10at3-450-sku-16371000/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 417mm 139 teeth 10AT3/417 SKU: 16370900](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-417mm-139-teeth-10at3-417-sku-16370900/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 399mm 133 teeth 10AT3/399 SKU: 16370800](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-399mm-133-teeth-10at3-399-sku-16370800/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 351mm 117 teeth 10AT3/351 SKU: 16370700](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-351mm-117-teeth-10at3-351-sku-16370700/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 300mm 100 teeth 10AT3/300 SKU: 16370600](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-300mm-100-teeth-10at3-300-sku-16370600/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 270mm 90 teeth 10AT3/270 SKU: 16370500](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-270mm-90-teeth-10at3-270-sku-16370500/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 267mm 89 teeth 10AT3/267 SKU: 16370400](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-267mm-89-teeth-10at3-267-sku-16370400/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 252mm 84 teeth 10AT3/252 SKU: 16370300](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-252mm-84-teeth-10at3-252-sku-16370300/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 201mm 67 teeth 10AT3/201 SKU: 16370200](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-201mm-67-teeth-10at3-201-sku-16370200/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 10mm Lw 150mm 50 teeth 10AT3/150 SKU: 16370100](https://maedler.in/product/polyurethane-timing-belt-at3-width-10mm-lw-150mm-50-teeth-10at3-150-sku-16370100/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 1011mm 337 teeth 6 AT3/1011 SKU: 16361900](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-1011mm-337-teeth-6-at3-1011-sku-16361900/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 900mm 300 teeth 6 AT3/900 SKU: 16361800](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-900mm-300-teeth-6-at3-900-sku-16361800/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 816mm 272 teeth 6 AT3/816 SKU: 16361700](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-816mm-272-teeth-6-at3-816-sku-16361700/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 714mm 238 teeth 6 AT3/714 SKU: 16361500](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-714mm-238-teeth-6-at3-714-sku-16361500/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 639mm 213 teeth 6 AT3/639 SKU: 16361400](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-639mm-213-teeth-6-at3-639-sku-16361400/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 600mm 200 teeth 6 AT3/600 SKU: 16361300](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-600mm-200-teeth-6-at3-600-sku-16361300/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 549mm 183 teeth 6 AT3/549 SKU: 16361200](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-549mm-183-teeth-6-at3-549-sku-16361200/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 501mm 167 teeth 6 AT3/501 SKU: 16361100](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-501mm-167-teeth-6-at3-501-sku-16361100/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 450mm 150 teeth 6 AT3/450 SKU: 16361000](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-450mm-150-teeth-6-at3-450-sku-16361000/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 417mm 139 teeth 6 AT3/417 SKU: 16360900](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-417mm-139-teeth-6-at3-417-sku-16360900/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 399mm 133 teeth 6 AT3/399 SKU: 16360800](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-399mm-133-teeth-6-at3-399-sku-16360800/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 351mm 117 teeth 6 AT3/351 SKU: 16360700](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-351mm-117-teeth-6-at3-351-sku-16360700/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 300mm 100 teeth 6 AT3/300 SKU: 16360600](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-300mm-100-teeth-6-at3-300-sku-16360600/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 270mm 90 teeth 6 AT3/270 SKU: 16360500](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-270mm-90-teeth-6-at3-270-sku-16360500/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 267mm 89 teeth 6 AT3/267 SKU: 16360400](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-267mm-89-teeth-6-at3-267-sku-16360400/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Polyurethane timing belt AT3 width 6mm Lw 252mm 84 teeth 6 AT3/252 SKU: 16360300](https://maedler.in/product/polyurethane-timing-belt-at3-width-6mm-lw-252mm-84-teeth-6-at3-252-sku-16360300/): Material: Endless belts from cast polyurethane (PU), with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. - [Edge trim PVC black application range 4.0 - 6.0 mm height 16.6mm width 11.5mm SKU: 68703000](https://maedler.in/product/edge-trim-pvc-black-application-range-4-0-6-0-mm-height-16-6mm-width-11-5mm-sku-68703000/): Clamping Range [mm] 4,0 – 6,0 Colour schwarz Max. Length [m] 100 a [mm] 50 b [mm] 40 c [mm] 30 d [mm] 30 Weight [g/m] 160 CATALOG PRODUCT PAGE CAD FILES (download) - [Edge trim PVC black application range 1.0 - 4.0 mm height 14.5mm width 10mm SKU: 68702000](https://maedler.in/product/edge-trim-pvc-black-application-range-1-0-4-0-mm-height-14-5mm-width-10mm-sku-68702000/): Clamping Range [mm] 1,0 – 4,0 Colour schwarz Max. Length [m] 50 a [mm] 30 b [mm] 20 c [mm] 20 d [mm] 20 Weight [g/m] 140 CATALOG PRODUCT PAGE CAD FILES (download) - [Edge trim PVC black application range 1.0 - 2.0 mm height 9.5mm width 6.5mm SKU: 68701000](https://maedler.in/product/edge-trim-pvc-black-application-range-1-0-2-0-mm-height-9-5mm-width-6-5mm-sku-68701000/): Clamping Range [mm] 1,0 – 2,0 Colour schwarz Max. Length [m] 50 a [mm] 15 b [mm] 15 c [mm] 10 d [mm] 10 Weight [g/m] 65 CATALOG PRODUCT PAGE CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 13mm width 5mm sealed on both sides SKU: 686-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-13mm-width-5mm-sealed-on-both-sides-sku-686-2rs-mae/): d [mm] 6 D [mm] 13 B [mm] 5 Type beidseitig abgedichtet Load Rating dyn. C [kN] 1,11 Load Rating stat. C0 [kN] 0,41 Maximum Speed [min 1] 41.000 Weight [g] 1,8 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 13mm width 5mm shielded on both sides SKU: 686-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-13mm-width-5mm-shielded-on-both-sides-sku-686-zz-mae/): d [mm] 6 D [mm] 13 B [mm] 5 Type beidseitig Deckscheiben Load Rating dyn. C [kN] 1,11 Load Rating stat. C0 [kN] 0,41 Maximum Speed [min 1] 41.000 Weight [g] 1,8 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 11mm width 5mm sealed on both sides SKU: 685-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-11mm-width-5mm-sealed-on-both-sides-sku-685-2rs-mae/): d [mm] 5 D [mm] 11 B [mm] 5 Type beidseitig abgedichtet Load Rating dyn. C [kN] 0,73 Load Rating stat. C0 [kN] 0,26 Maximum Speed [min 1] 45.000 Weight [g] 1 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 11mm width 5mm shielded on both sides SKU: 685-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-11mm-width-5mm-shielded-on-both-sides-sku-685-zz-mae/): d [mm] 5 D [mm] 11 B [mm] 5 Type beidseitig Deckscheiben Load Rating dyn. C [kN] 0,73 Load Rating stat. C0 [kN] 0,26 Maximum Speed [min 1] 45.000 Weight [g] 1 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 30mm thread M40x1.5 SKU: 68183514](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-30mm-thread-m40x1-5-sku-68183514/): d1 [mm] 30 d2 Gewinde M40x1,5 d3 [mm] 47,5 l1 [mm] 11,5 l2 [mm] 13 s [mm] 40,5 TA [Nm] 8 – 10 Gewicht [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 30mm thread G 1 1/4" SKU: 68183513](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-30mm-thread-g-1-1-4-sku-68183513/): d1 [mm] 30 d2 Gewinde G1 1/4″ d3 [mm] 47,5 l1 [mm] 11,5 l2 [mm] 13 s [mm] 40,5 TA [Nm] 8 – 10 Gewicht [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 25mm thread M35x1.5 SKU: 68183512](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-25mm-thread-m35x1-5-sku-68183512/): d1 [mm] 25 d2 Gewinde M35x1,5 d3 [mm] 40 l1 [mm] 11 l2 [mm] 10 s [mm] 34 TA [Nm] 8 – 10 Gewicht [g] 13 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 25mm thread G 1" SKU: 68183511](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-25mm-thread-g-1-sku-68183511/): d1 [mm] 25 d2 Gewinde G 1″ d3 [mm] 40 l1 [mm] 11 l2 [mm] 10 s [mm] 34 TA [Nm] 8 – 10 Gewicht [g] 12 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 22mm thread M30x1.5 SKU: 68183510](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-22mm-thread-m30x1-5-sku-68183510/): d1 [mm] 22 d2 Gewinde M30x1,5 d3 [mm] 35 l1 [mm] 9 l2 [mm] 10 s [mm] 30 TA [Nm] 8 – 10 Gewicht [g] 6 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 20mm thread M27x1.5 SKU: 68183509](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-20mm-thread-m27x1-5-sku-68183509/): d1 [mm] 20 d2 Gewinde M27x1,5 d3 [mm] 31,5 l1 [mm] 9 l2 [mm] 9 s [mm] 27 TA [Nm] 8 – 10 Gewicht [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 20mm thread G 3/4" SKU: 68183508](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-20mm-thread-g-3-4-sku-68183508/): d1 [mm] 20 d2 Gewinde G 3/4″ d3 [mm] 31,5 l1 [mm] 10,5 l2 [mm] 9 s [mm] 27 TA [Nm] 6 – 8 Gewicht [g] 6 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 19mm thread M26x1.5 SKU: 68183507](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-19mm-thread-m26x1-5-sku-68183507/): d1 [mm] 18 d2 Gewinde M26x1,5 d3 [mm] 31,5 l1 [mm] 13 l2 [mm] 9 s [mm] 27 TA [Nm] 8 – 10 Gewicht [g] 8 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 18mm thread M25x1.5 SKU: 68183506](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-18mm-thread-m25x1-5-sku-68183506/): d1 [mm] 18 d2 Gewinde M25x1,5 d3 [mm] 31,5 l1 [mm] 8 l2 [mm] 9 s [mm] 27 TA [Nm] 8 – 10 Gewicht [g] 9 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 14mm thread M20x1.5 SKU: 68183505](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-14mm-thread-m20x1-5-sku-68183505/): d1 [mm] 14 d2 Gewinde M20x1,5 d3 [mm] 26 l1 [mm] 9,5 l2 [mm] 8 s [mm] 22 TA [Nm] 8 – 10 Gewicht [g] 4 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 14mm thread G 1/2" SKU: 68183504](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-14mm-thread-g-1-2-sku-68183504/): d1 [mm] 14 d2 Gewinde G 1/2″ d3 [mm] 26 l1 [mm] 10,5 l2 [mm] 8 s [mm] 22 TA [Nm] 4 – 6 Gewicht [g] 5 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 11mm thread M16x1.5 SKU: 68183503](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-11mm-thread-m16x1-5-sku-68183503/): d1 [mm] 11 d2 Gewinde M16x1,5 d3 [mm] 22 l1 [mm] 8 l2 [mm] 7 s [mm] 19 TA [Nm] 2 – 3 Gewicht [g] 3 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 11mm thread G 3/8" SKU: 68183502](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-11mm-thread-g-3-8-sku-68183502/): d1 [mm] 11 d2 Gewinde G 3/8″ d3 [mm] 22 l1 [mm] 7,5 l2 [mm] 7 s [mm] 19 TA [Nm] 3 – 5 Gewicht [g] 4 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 541 Polyamid PA-T sight window 9mm thread G 1/4" SKU: 68183501](https://maedler.in/product/oil-level-sight-glass-541-polyamid-pa-t-sight-window-9mm-thread-g-1-4-sku-68183501/): d1 [mm] 9 d2 Gewinde G 1/4″ d3 [mm] 18 l1 [mm] 10 l2 [mm] 6 s [mm] 15 TA [Nm] 2 – 3 Gewicht [g] 1,8 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 50mm thread M 40x1,5 SKU: 68183000](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-50mm-thread-m-40x15-sku-68183000/): Type metrisch d1 [mm] 32 Thread d2 M40 x 1,5 d3+/0,5 [mm] 50 l1 [mm] 12,0 l2 [mm] 9,0 s [mm] 46 Weight [g] 39 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 50mm thread G 1 1/4 SKU: 68182900](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-50mm-thread-g-1-1-4-sku-68182900/): Type zöllig d1 [mm] 32 Thread d2 G1 1/4″ d3+/0,5 [mm] 50 l1 [mm] 12,0 l2 [mm] 9,0 s [mm] 46 Weight [g] 42 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 40mm thread M 33x1,5 SKU: 68182800](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-40mm-thread-m-33x15-sku-68182800/): Type metrisch d1 [mm] 24 Thread d2 M33 x 1,5 d3+/0,5 [mm] 40 l1 [mm] 11,0 l2 [mm] 8,5 s [mm] 36 Weight [g] 26 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 40mm thread G 1 SKU: 68182700](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-40mm-thread-g-1-sku-68182700/): Type zöllig d1 [mm] 24 Thread d2 G 1″ d3+/0,5 [mm] 40 l1 [mm] 11,0 l2 [mm] 8,5 s [mm] 36 Weight [g] 26 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 32mm thread M 26x1,5 SKU: 68182600](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-32mm-thread-m-26x15-sku-68182600/): Type metrisch d1 [mm] 18 Thread d2 M26 x 1,5 d3+/0,5 [mm] 32 l1 [mm] 9,0 l2 [mm] 8,0 s [mm] 30 Weight [g] 18 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 32mm thread G 3/4 SKU: 68182500](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-32mm-thread-g-3-4-sku-68182500/): Type zöllig d1 [mm] 18 Thread d2 G 3/4″ d3+/0,5 [mm] 32 l1 [mm] 9,0 l2 [mm] 8,0 s [mm] 30 Weight [g] 18 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 26mm thread M 20x1,5 SKU: 68182400](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-26mm-thread-m-20x15-sku-68182400/): Type metrisch d1 [mm] 14 Thread d2 M20 x 1,5 d3+/0,5 [mm] 26 l1 [mm] 8,5 l2 [mm] 7,5 s [mm] 23 Weight [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 26mm thread G 1/2 SKU: 68182300](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-26mm-thread-g-1-2-sku-68182300/): Type zöllig d1 [mm] 14 Thread d2 G 1/2″ d3+/0,5 [mm] 26 l1 [mm] 8,5 l2 [mm] 7,5 s [mm] 23 Weight [g] 11 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 22mm thread M 16x1,5 SKU: 68182200](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-22mm-thread-m-16x15-sku-68182200/): Type metrisch d1 [mm] 11 Thread d2 M16 x 1,5 d3+/0,5 [mm] 22 l1 [mm] 8,0 l2 [mm] 7,5 s [mm] 20 Weight [g] 8 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743.1 temperature resistant up to 180°C outer diameter 22mm thread G 3/8 SKU: 68182100](https://maedler.in/product/oil-level-sight-glass-743-1-temperature-resistant-up-to-180c-outer-diameter-22mm-thread-g-3-8-sku-68182100/): Type zöllig d1 [mm] 11 Thread d2 G 3/8 “ d3+/0,5 [mm] 22 l1 [mm] 8,0 l2 [mm] 7,5 s [mm] 20 Weight [g] 9 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 100°C outer diameter 50mm thread M 40x1,5 SKU: 68181000](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-100c-outer-diameter-50mm-thread-m-40x15-sku-68181000/): Type metrisch d1 [mm] 32 Thread d2 M40 x 1,5 d3+/0,5 [mm] 50 l1 [mm] 12,0 l2 [mm] 9,0 s [mm] 46 Weight [g] 39 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 100°C outer diameter 50mm thread G 1 1/4 SKU: 68180900](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-100c-outer-diameter-50mm-thread-g-1-1-4-sku-68180900/): Type zöllig d1 [mm] 32 Thread d2 G1 1/4″ d3+/0,5 [mm] 50 l1 [mm] 12,0 l2 [mm] 9,0 s [mm] 46 Weight [g] 42 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 100°C outer diameter 40mm thread M 33x1,5 SKU: 68180800](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-100c-outer-diameter-40mm-thread-m-33x15-sku-68180800/): Type metrisch d1 [mm] 24 Thread d2 M33 x 1,5 d3+/0,5 [mm] 40 l1 [mm] 11,0 l2 [mm] 8,5 s [mm] 36 Weight [g] 26 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 100°C outer diameter 40mm thread G 1 SKU: 68180700](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-100c-outer-diameter-40mm-thread-g-1-sku-68180700/): Type zöllig d1 [mm] 24 Thread d2 G 1″ d3+/0,5 [mm] 40 l1 [mm] 11,0 l2 [mm] 8,5 s [mm] 36 Weight [g] 26 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 100°C outer diameter 32mm thread M 26x1,5 SKU: 68180600](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-100c-outer-diameter-32mm-thread-m-26x15-sku-68180600/): Type metrisch d1 [mm] 18 Thread d2 M26 x 1,5 d3+/0,5 [mm] 32 l1 [mm] 9,0 l2 [mm] 8,0 s [mm] 30 Weight [g] 18 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 100°C outer diameter 32mm thread G 3/4 SKU: 68180500](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-100c-outer-diameter-32mm-thread-g-3-4-sku-68180500/): Type zöllig d1 [mm] 18 Thread d2 G 3/4″ d3+/0,5 [mm] 32 l1 [mm] 9,0 l2 [mm] 8,0 s [mm] 30 Weight [g] 18 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 100°C outer diameter 26mm thread M 20x1,5 SKU: 68180400](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-100c-outer-diameter-26mm-thread-m-20x15-sku-68180400/): Type metrisch d1 [mm] 14 Thread d2 M20 x 1,5 d3+/0,5 [mm] 26 l1 [mm] 8,5 l2 [mm] 7,5 s [mm] 23 Weight [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 100°C outer diameter 26mm thread G 1/2 SKU: 68180300](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-100c-outer-diameter-26mm-thread-g-1-2-sku-68180300/): Type zöllig d1 [mm] 14 Thread d2 G 1/2″ d3+/0,5 [mm] 26 l1 [mm] 8,5 l2 [mm] 7,5 s [mm] 23 Weight [g] 11 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 100°C outer diameter 22mm thread M 16x1,5 SKU: 68180200](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-100c-outer-diameter-22mm-thread-m-16x15-sku-68180200/): Type metrisch d1 [mm] 11 Thread d2 M16 x 1,5 d3+/0,5 [mm] 22 l1 [mm] 8,0 l2 [mm] 7,5 s [mm] 20 Weight [g] 8 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level sight glass 743 temperature resistant up to 180°C outer diameter 22mm thread G 3/8 SKU: 68180100](https://maedler.in/product/oil-level-sight-glass-743-temperature-resistant-up-to-180c-outer-diameter-22mm-thread-g-3-8-sku-68180100/): Type zöllig d1 [mm] 11 Thread d2 G 3/8 “ d3+/0,5 [mm] 22 l1 [mm] 8,0 l2 [mm] 7,5 s [mm] 20 Weight [g] 9 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level window SR 250 sight 229 x 18mm SKU: 68113600](https://maedler.in/product/oil-level-window-sr-250-sight-229-x-18mm-sku-68113600/): Type SR 250 Display Opening [mm] 229 x 18 L x Width [mm] 250 x 45 Fastening [mm] 12 Löcher Ø 5,5 X [mm] 40 Weight [g] 270 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level window SR 200 sight 179 x 18mm SKU: 68113500](https://maedler.in/product/oil-level-window-sr-200-sight-179-x-18mm-sku-68113500/): Type SR 200 Display Opening [mm] 179 x 18 L x Width [mm] 200 x 45 Fastening [mm] 10 Löcher Ø 5,5 X [mm] 40 Weight [g] 210 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level window SR 160 sight 139 x 18mm SKU: 68113400](https://maedler.in/product/oil-level-window-sr-160-sight-139-x-18mm-sku-68113400/): Type SR 160 Display Opening [mm] 139 x 18 L x Width [mm] 160 x 45 Fastening [mm] 8 Löcher Ø 5,5 X [mm] 40 Weight [g] 170 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level window SR 125 sight 104 x 18mm SKU: 68113300](https://maedler.in/product/oil-level-window-sr-125-sight-104-x-18mm-sku-68113300/): Type SR 125 Display Opening [mm] 104 x 18 L x Width [mm] 125 x 45 Fastening [mm] 6 Löcher Ø 5,5 X [mm] 45 Weight [g] 135 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level window SR 100 sight 79 x 18mm SKU: 68113200](https://maedler.in/product/oil-level-window-sr-100-sight-79-x-18mm-sku-68113200/): Type SR 100 Display Opening [mm] 79 x 18 L x Width [mm] 100 x 45 Fastening [mm] 6 Löcher Ø 5,5 X [mm] 35 Weight [g] 108 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level window SR 80 sight 59 x 18mm SKU: 68113100](https://maedler.in/product/oil-level-window-sr-80-sight-59-x-18mm-sku-68113100/): Type SR 80 Display Opening [mm] 59 x 18 L x Width [mm] 80 x 45 Fastening [mm] 4 Löcher Ø 5,5 X [mm] 45 Weight [g] 84 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil-level window SR 60 sight 39 x 18mm SKU: 68113000](https://maedler.in/product/oil-level-window-sr-60-sight-39-x-18mm-sku-68113000/): Type SR 60 Display Opening [mm] 39 x 18 L x Width [mm] 60 x 45 Fastening [mm] 4 Löcher Ø 5,5 X [mm] 28 Weight [g] 55 CATALOG PRODUCT PAGE CAD FILES (download) - [Assortment box protective caps without bracket DIN 71412 SKU: 68056096](https://maedler.in/product/assortment-box-protective-caps-without-bracket-din-71412-sku-68056096/): Ausführung ohne Bügel | no bracket Inhalt [Stk.] 180 Gewicht [kg] 0,23 CATALOG PRODUCT PAGE CAD FILES (download) - [Assortment box protective caps with bracket DIN 71412 SKU: 68056095](https://maedler.in/product/assortment-box-protective-caps-with-bracket-din-71412-sku-68056095/): Ausführung mit Bügel | bracket Inhalt [Stk.] 180 Gewicht [kg] 0,23 CATALOG PRODUCT PAGE CAD FILES (download) - [Assortment box hydraulic grease nipples DIN 71412 SKU: 68056090](https://maedler.in/product/assortment-box-hydraulic-grease-nipples-din-71412-sku-68056090/): Inhalt [Stk.] 100 Gewicht [kg] 0,89 CATALOG PRODUCT PAGE CAD FILES (download) - [Protective cap with bracket for hydraulic grease nipple DIN 71412 blue SKU: 68056084](https://maedler.in/product/protective-cap-with-bracket-for-hydraulic-grease-nipple-din-71412-blue-sku-68056084/): Farbe Blau | blue Gewicht [g] 1 CATALOG PRODUCT PAGE CAD FILES (download) - [Protective cap with bracket for hydraulic grease nipple DIN 71412 black SKU: 68056083](https://maedler.in/product/protective-cap-with-bracket-for-hydraulic-grease-nipple-din-71412-black-sku-68056083/): Farbe Schwarz | black Gewicht [g] 1 CATALOG PRODUCT PAGE CAD FILES (download) - [Protective cap with bracket for hydraulic grease nipple DIN 71412 green SKU: 68056082](https://maedler.in/product/protective-cap-with-bracket-for-hydraulic-grease-nipple-din-71412-green-sku-68056082/): Farbe Grün | green Gewicht [g] 1 CATALOG PRODUCT PAGE CAD FILES (download) - [Protective cap with bracket for hydraulic grease nipples DIN 71412 red SKU: 68056081](https://maedler.in/product/protective-cap-with-bracket-for-hydraulic-grease-nipples-din-71412-red-sku-68056081/): Farbe Rot | red Gewicht [g] 1 CATALOG PRODUCT PAGE CAD FILES (download) - [Protective cap with bracket for hydraulic grease nipples DIN 71412 yellow SKU: 68056080](https://maedler.in/product/protective-cap-with-bracket-for-hydraulic-grease-nipples-din-71412-yellow-sku-68056080/): Farbe Gelb | yellow Gewicht [g] 1 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 stainless steel shape C - H3 M10x1 keg SKU: 68056062SS](https://maedler.in/product/hydraulic-grease-nipple-din-71412-stainless-steel-shape-c-h3-m10x1-keg-sku-68056062ss/): Form C (H3) d [mm] M10 x 1 keg KopfØ [mm] 6,5 SW [mm] 11 L [mm] 18 L1 [mm] 5,3 A [mm] 13 Gewicht [g] 10,4 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 shape C - H3 M10x1 keg SKU: 68056062](https://maedler.in/product/hydraulic-grease-nipple-din-71412-shape-c-h3-m10x1-keg-sku-68056062/): Form C (H3) d [mm] M10 x 1 keg KopfØ [mm] 6,5 SW [mm] 11 L [mm] 18 L1 [mm] 5,3 A [mm] 13 Gewicht [g] 10,4 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 stainless steel shape C - H3 M8x1 keg SKU: 68056061SS](https://maedler.in/product/hydraulic-grease-nipple-din-71412-stainless-steel-shape-c-h3-m8x1-keg-sku-68056061ss/): Form C (H3) d [mm] M8 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 18 L1 [mm] 5,5 A [mm] 11,8 Gewicht [g] 7,1 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 shape C - H3 M8x1 keg SKU: 68056061](https://maedler.in/product/hydraulic-grease-nipple-din-71412-shape-c-h3-m8x1-keg-sku-68056061/): Form C (H3) d [mm] M8 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 18 L1 [mm] 5,5 A [mm] 11,8 Gewicht [g] 7,1 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 stainless steel shape C - H3 M6x1 keg SKU: 68056060SS](https://maedler.in/product/hydraulic-grease-nipple-din-71412-stainless-steel-shape-c-h3-m6x1-keg-sku-68056060ss/): Form C (H3) d [mm] M6 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 18 L1 [mm] 5,2 A [mm] 11,8 Gewicht [g] 6,7 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 shape C - H3 M6x1 keg SKU: 68056060](https://maedler.in/product/hydraulic-grease-nipple-din-71412-shape-c-h3-m6x1-keg-sku-68056060/): Form C (H3) d [mm] M6 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 18 L1 [mm] 5,5 A [mm] 11,8 Gewicht [g] 6,7 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 stainless steel shape B - H2 M10x1 keg SKU: 68056042SS](https://maedler.in/product/hydraulic-grease-nipple-din-71412-stainless-steel-shape-b-h2-m10x1-keg-sku-68056042ss/): Form B (H2) d [mm] M10 x 1 keg KopfØ [mm] 6,5 SW [mm] 11 L [mm] 22,8 L1 [mm] 5,2 A [mm] 10 Gewicht [g] 11 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 shape B - H2 M10x1 keg SKU: 68056042](https://maedler.in/product/hydraulic-grease-nipple-din-71412-shape-b-h2-m10x1-keg-sku-68056042/): Form B (H2) d [mm] M10 x 1 keg KopfØ [mm] 6,5 SW [mm] 11 L [mm] 22,8 L1 [mm] 5,2 A [mm] 10 Gewicht [g] 11 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 stainless steel shape B - H2 M8x1 keg SKU: 68056041SS](https://maedler.in/product/hydraulic-grease-nipple-din-71412-stainless-steel-shape-b-h2-m8x1-keg-sku-68056041ss/): Form B (H2) d [mm] M8 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 22,8 L1 [mm] 5,1 A [mm] 10 Gewicht [g] 7,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 shape B - H2 M8x1 keg SKU: 68056041](https://maedler.in/product/hydraulic-grease-nipple-din-71412-shape-b-h2-m8x1-keg-sku-68056041/): Form B (H2) d [mm] M8 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 22,8 L1 [mm] 5,1 A [mm] 10 Gewicht [g] 7,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 stainless steel shape B - H2 M6x1 keg SKU: 68056040SS](https://maedler.in/product/hydraulic-grease-nipple-din-71412-stainless-steel-shape-b-h2-m6x1-keg-sku-68056040ss/): Form B (H2) d [mm] M6 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 23,5 L1 [mm] 5,1 A [mm] 10 Gewicht [g] 6,4 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 shape B - H2 M6x1 keg SKU: 68056040](https://maedler.in/product/hydraulic-grease-nipple-din-71412-shape-b-h2-m6x1-keg-sku-68056040/): Form B (H2) d [mm] M6 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 23,5 L1 [mm] 5,1 A [mm] 10 Gewicht [g] 6,4 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 stainless steel shape A - H1 M10x1 keg SKU: 68056022SS](https://maedler.in/product/hydraulic-grease-nipple-din-71412-stainless-steel-shape-a-h1-m10x1-keg-sku-68056022ss/): Form A (H1) d [mm] M10 x 1 keg KopfØ [mm] 6,5 SW [mm] 11 L [mm] 15,8 L1 [mm] 5,8 A [mm] – Gewicht [g] 5,6 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 shape A - H1 M10x1 keg SKU: 68056022](https://maedler.in/product/hydraulic-grease-nipple-din-71412-shape-a-h1-m10x1-keg-sku-68056022/): Form A (H1) d [mm] M10 x 1 keg KopfØ [mm] 6,5 SW [mm] 11 L [mm] 15,8 L1 [mm] 5,8 A [mm] – Gewicht [g] 5,6 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 stainless steel shape A - H1 M8x1 keg SKU: 68056021SS](https://maedler.in/product/hydraulic-grease-nipple-din-71412-stainless-steel-shape-a-h1-m8x1-keg-sku-68056021ss/): Form A (H1) d [mm] M8 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 15,8 L1 [mm] 6 A [mm] – Gewicht [g] 4 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 shape A - H1 M8x1 keg SKU: 68056021](https://maedler.in/product/hydraulic-grease-nipple-din-71412-shape-a-h1-m8x1-keg-sku-68056021/): Form A (H1) d [mm] M8 x 1 keg KopfØ [mm] 6,5 SW [mm] 9 L [mm] 15,8 L1 [mm] 6 A [mm] – Gewicht [g] 4 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 stainless steel shape A - H1 M6x1 keg SKU: 68056020SS](https://maedler.in/product/hydraulic-grease-nipple-din-71412-stainless-steel-shape-a-h1-m6x1-keg-sku-68056020ss/): Form A (H1) d [mm] M6 x 1 keg KopfØ [mm] 6,5 SW [mm] 7 L [mm] 15,8 L1 [mm] 6 A [mm] – Gewicht [g] 2,7 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic grease nipple DIN 71412 shape A - H1 M6x1 keg SKU: 68056020](https://maedler.in/product/hydraulic-grease-nipple-din-71412-shape-a-h1-m6x1-keg-sku-68056020/): Form A (H1) d [mm] M6 x 1 keg KopfØ [mm] 6,5 SW [mm] 7 L [mm] 15,8 L1 [mm] 6 A [mm] – Gewicht [g] 2,7 CATALOG PRODUCT PAGE CAD FILES (download) - [Hydraulic safety-coupler safeLOCK thread M10x1 SKU: 68056010](https://maedler.in/product/hydraulic-safety-coupler-safelock-thread-m10x1-sku-68056010/): L [mm] 32 Gewicht [g] 102 CATALOG PRODUCT PAGE CAD FILES (download) - [High pressure push type grease gun DIN 1282A with universal and conical couplers SKU: 68056005](https://maedler.in/product/high-pressure-push-type-grease-gun-din-1282a-with-universal-and-conical-couplers-sku-68056005/): Volume [ml] 40 Weight [g] 294 CATALOG PRODUCT PAGE CAD FILES (download) - [One-hand grease gun for Lube-Shuttle® cartridges M10x1 with high-pressure rubber armoured hose with coupler SKU: 68056002](https://maedler.in/product/one-hand-grease-gun-for-lube-shuttle-cartridges-m10x1-with-high-pressure-rubber-armoured-hose-with-coupler-sku-68056002/): D [mm] 56,1 B [mm] 230 L [mm] 304 Anschluss gewinde [mm] M10 x 1 Schmier schlauch [mm] Ø13 x 300 Arbeits druck [bar] 200 Höchst druck [bar] 300 Berst druck [bar] 1650 Förderleistung pro Hub [cm 3] 0,8 Gewicht [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [Side-lever grease gun for Lube-Shuttle® cartridges M10x1 with high-pressure rubber armoured hose with coupler SKU: 68056001](https://maedler.in/product/side-lever-grease-gun-for-lube-shuttle-cartridges-m10x1-with-high-pressure-rubber-armoured-hose-with-coupler-sku-68056001/): D [mm] 56,1 B [mm] 120 L [mm] 325 Anschluss gewinde [mm] M10 x 1 Schmier schlauch [mm] Ø13 x 300 Arbeits druck [bar] 400 Höchst druck [bar] 800 Berst druck [bar] 1650 Förderleistung pro Hub [cm 3] 1,5 Gewicht [kg] 0,94 CATALOG PRODUCT PAGE CAD FILES (download) - [Standard side-lever grease gun DIN 1283 M10x1 with high-pressure rubber armoured hose with coupler SKU: 68056000](https://maedler.in/product/standard-side-lever-grease-gun-din-1283-m10x1-with-high-pressure-rubber-armoured-hose-with-coupler-sku-68056000/): D [mm] 56,1 B [mm] 120 L [mm] 370 Anschluss gewinde [mm] M10 x 1 Schmier schlauch [mm] Ø13 x 300 Arbeits druck [bar] 400 Höchst druck [bar] 800 Berst druck [bar] 1650 Förderleistung pro Hub [cm 3] 0-1,5 Gewicht [kg] 1,28 CATALOG PRODUCT PAGE CAD FILES (download) - [Grease cartridge for Lube-Shuttle® with MEGUIN rolling bearing grease LP2 9029 KP2K-30 400g SKU: 68055031](https://maedler.in/product/grease-cartridge-for-lube-shuttle-with-meguin-rolling-bearing-grease-lp2-9029-kp2k-30-400g-sku-68055031/): Inhalt [g] 400 Gebindeart Kartusche Lube-Shuttle Gewicht [g] 444 CATALOG PRODUCT PAGE CAD FILES (download) - [Grease cartridge for DIN 1284 with MEGUIN rolling bearing grease LP2 4769 KP2K-30 400g SKU: 68055030](https://maedler.in/product/grease-cartridge-for-din-1284-with-meguin-rolling-bearing-grease-lp2-4769-kp2k-30-400g-sku-68055030/): Inhalt [g] 400 Gebindeart Kartusche DIN 1284 Gewicht [g] 440 CATALOG PRODUCT PAGE CAD FILES (download) - [Grease cartridge for Lube-Shuttle® with GRAPHITE 2M GR 3120092 KFP2K-30 400g SKU: 68055020](https://maedler.in/product/grease-cartridge-for-lube-shuttle-with-graphite-2m-gr-3120092-kfp2k-30-400g-sku-68055020/): Inhalt [g] 400 Gewicht [g] 444 CATALOG PRODUCT PAGE CAD FILES (download) - [SKF LGAF 3E anti-fretting agent installation paste 500g-can (Actual safety data sheet on the internet in the section Downloads) SKU: 68055008](https://maedler.in/product/skf-lgaf-3e-anti-fretting-agent-installation-paste-500g-can-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68055008/): Inhalt [g] 500 Gebindeart Dose Gewicht [g] 550 CATALOG PRODUCT PAGE CAD FILES (download) - [SKF LGAF 3E anti-fretting agent installation paste 35g-tube (Actual safety data sheet on the internet in the section Downloads) SKU: 68055007](https://maedler.in/product/skf-lgaf-3e-anti-fretting-agent-installation-paste-35g-tube-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68055007/): Inhalt [g] 35 Gebindeart Tube Gewicht [g] 40 CATALOG PRODUCT PAGE CAD FILES (download) - [SKF general purpose grease LGMT3/0.4 420ml-cartridge (Actual safety data sheet on the internet in the section Downloads) SKU: 68055003](https://maedler.in/product/skf-general-purpose-grease-lgmt3-0-4-420ml-cartridge-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68055003/): Inhalt [ml] 420 Gebindeart Kartusche Gewicht [g] 435 CATALOG PRODUCT PAGE CAD FILES (download) - [SKF general purpose grease LGMT2/0.4 420ml-cartridge (Actual safety data sheet on the internet in the section Downloads) SKU: 68055002](https://maedler.in/product/skf-general-purpose-grease-lgmt2-0-4-420ml-cartridge-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68055002/): Inhalt [ml] 420 Gebindeart Kartusche Gewicht [g] 425 CATALOG PRODUCT PAGE CAD FILES (download) - [SKF general purpose grease LGMT2/0.2 (Actual safety data sheet on the internet in the section Downloads) SKU: 68055001](https://maedler.in/product/skf-general-purpose-grease-lgmt2-0-2-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68055001/): Inhalt [ml] 200 (g) Gebindeart Tube Gewicht [g] 225 CATALOG PRODUCT PAGE CAD FILES (download) - [Oil throttle G 1/4 SKU: 68054700](https://maedler.in/product/oil-throttle-g-1-4-sku-68054700/): Gesamthöhe [mm] 26 Einbauhöhe ca. [mm] 16 Schlüsselweite [mm] 17 Gewinde G1/4″ Gewicht [g] 26 CATALOG PRODUCT PAGE CAD FILES (download) - [Lubrication brush 30 x 40 mm R 1/4" internal thread SKU: 68054600](https://maedler.in/product/lubrication-brush-30-x-40-mm-r-1-4-internal-thread-sku-68054600/): Größe [mm] 30 x 40 Gesamthöhe [mm] 48 Einbauhöhe ca. [mm] 39 Gewinde R1/4″ Gewicht [g] 38 CATALOG PRODUCT PAGE CAD FILES (download) - [Lubrication brush 20 mm R 1/4" internal thread SKU: 68054500](https://maedler.in/product/lubrication-brush-20-mm-r-1-4-internal-thread-sku-68054500/): Größe [mm] Ø 25 Gesamthöhe [mm] 71 Einbauhöhe ca. [mm] 62 Gewinde R1/4″ Gewicht [g] 36 CATALOG PRODUCT PAGE CAD FILES (download) - [Extension 55mm total length 65mm internal thread G1/4" external thread R1/4" steel zinc plated SKU: 68054365](https://maedler.in/product/extension-55mm-total-length-65mm-internal-thread-g1-4-external-thread-r1-4-steel-zinc-plated-sku-68054365/): Material: Brass or steel, zinc-plated.Extension with Whitworth pipe thread 1/4“, suitable for e.g.:Flange bearings DIN 502 A, DIN 502 B and DIN 503.Pillow block bearings DIN 504 A, DIN 504 B and DIN 505.Lubricators.Drip-feed oilers Unikum and UNI, sizes with R1/4".Stauffer grease boxes, sizes with R1/4". - [Extension 30mm total length 40mm internal thread G1/4" external thread G1/4" brass SKU: 68054300](https://maedler.in/product/extension-30mm-total-length-40mm-internal-thread-g1-4-external-thread-g1-4-brass-sku-68054300/): Material: Brass or steel, zinc-plated.Extension with Whitworth pipe thread 1/4“, suitable for e.g.:Flange bearings DIN 502 A, DIN 502 B and DIN 503.Pillow block bearings DIN 504 A, DIN 504 B and DIN 505.Lubricators.Drip-feed oilers Unikum and UNI, sizes with R1/4".Stauffer grease boxes, sizes with R1/4". - [Bracket for perma lubricators stainless steel SKU: 68054000](https://maedler.in/product/bracket-for-perma-lubricators-stainless-steel-sku-68054000/): Material: Stainless steel 1.4016 or 1.4301 (AISI 304). - [Activator screw for lubricator "perma"; grey; 12 months SKU: 68051012](https://maedler.in/product/activator-screw-for-lubricator-perma-grey-12-months-sku-68051012/): Material: Body of screw from plastic. The lubrication period is determined by the different coloured activator screws. Function: Tightening the activating screw into the lubricator makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricator has to be ordered seperately. - [Activator screw for lubricator "perma"; red; 6 months SKU: 68051006](https://maedler.in/product/activator-screw-for-lubricator-perma-red-6-months-sku-68051006/): Material: Body of screw from plastic. The lubrication period is determined by the different coloured activator screws. Function: Tightening the activating screw into the lubricator makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricator has to be ordered seperately. - [Activator screw for lubricator "perma"; green; 3 months SKU: 68051003](https://maedler.in/product/activator-screw-for-lubricator-perma-green-3-months-sku-68051003/): Material: Body of screw from plastic. The lubrication period is determined by the different coloured activator screws. Function: Tightening the activating screw into the lubricator makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricator has to be ordered seperately. - [Activator screw for lubricator "perma"; yellow; 1 month SKU: 68051001](https://maedler.in/product/activator-screw-for-lubricator-perma-yellow-1-month-sku-68051001/): Material: Body of screw from plastic. The lubrication period is determined by the different coloured activator screws. Function: Tightening the activating screw into the lubricator makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricator has to be ordered seperately. - [Lubricator SO14 High performance oil (Actual safety data sheet on the internet in the section Downloads) SKU: 68050014](https://maedler.in/product/lubricator-so14-high-performance-oil-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68050014/): Material: Housing made from steel sheet. The code for the lubricant contained is stamped into the bottom of the housing (e.g. SF 01 = all-purpose grease). The activator screw has to be ordered seperately. Function: Tightening the activating screw makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricant is continuously injected into the lubrication point. When the lubrication cartridge is empty, the coloured piston becomes clearly visible. The initial delay between activation and the first discharge of lubricant depends on the perma® type. Lubricant volume 120 cm3. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. Safety Data Sheets in the section Downloads. - [Lubricator SF10 Food grade grease (Actual safety data sheet on the internet in the section Downloads) SKU: 68050010](https://maedler.in/product/lubricator-sf10-food-grade-grease-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68050010/): Material: Housing made from steel sheet. The code for the lubricant contained is stamped into the bottom of the housing (e.g. SF 01 = all-purpose grease). The activator screw has to be ordered seperately. Function: Tightening the activating screw makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricant is continuously injected into the lubrication point. When the lubrication cartridge is empty, the coloured piston becomes clearly visible. The initial delay between activation and the first discharge of lubricant depends on the perma® type. Lubricant volume 120 cm3. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. Safety Data Sheets in the section Downloads. - [Lubricator SF06 Liquid grease (Actual safety data sheet on the internet in the section Downloads) SKU: 68050006](https://maedler.in/product/lubricator-sf06-liquid-grease-actual-safety-data-sheet-on-the-internet-in-the-section-downloads-sku-68050006/): Material: Housing made from steel sheet. The code for the lubricant contained is stamped into the bottom of the housing (e.g. SF 01 = all-purpose grease). The activator screw has to be ordered seperately. Function: Tightening the activating screw makes the gas generator drop into the electrolyte fluid, where it starts a chemical reaction that builds up pressure and causes the piston to move forward. The lubricant is continuously injected into the lubrication point. When the lubrication cartridge is empty, the coloured piston becomes clearly visible. The initial delay between activation and the first discharge of lubricant depends on the perma® type. Lubricant volume 120 cm3. Attention H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects. Safety Data Sheets in the section Downloads. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 50 mm 66 T10/72-0 SKU: 16457200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-50-mm-66-t10-72-0-sku-16457200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 50mm 66 T10/60-0 SKU: 16456000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-50mm-66-t10-60-0-sku-16456000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 50mm 66 T10/48-0 SKU: 16454800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-50mm-66-t10-48-0-sku-16454800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 50mm 66 T10/44-0 SKU: 16454400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-50mm-66-t10-44-0-sku-16454400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 50mm 66 T10/40-2 SKU: 16454000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-50mm-66-t10-40-2-sku-16454000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 50mm 66 T10/36-2 SKU: 16453600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-50mm-66-t10-36-2-sku-16453600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 50mm 66 T10/32-2 SKU: 16453200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-50mm-66-t10-32-2-sku-16453200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 50mm 66 T10/30-2 SKU: 16453000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-50mm-66-t10-30-2-sku-16453000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 50mm 66 T10/28-2 SKU: 16452800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-50mm-66-t10-28-2-sku-16452800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 50mm 66 T10/27-2 SKU: 16452700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-50mm-66-t10-27-2-sku-16452700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 50mm 66 T10/26-2 SKU: 16452600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-50mm-66-t10-26-2-sku-16452600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 50mm 66 T10/25-2 SKU: 16452500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-50mm-66-t10-25-2-sku-16452500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 50mm 66 T10/24-2 SKU: 16452400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-50mm-66-t10-24-2-sku-16452400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 50mm 66 T10/22-2 SKU: 16452200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-50mm-66-t10-22-2-sku-16452200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 50mm 66 T10/20-2 SKU: 16452000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-50mm-66-t10-20-2-sku-16452000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 50mm 66 T10/19-2 SKU: 16451900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-50mm-66-t10-19-2-sku-16451900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 50mm 66 T10/18-2 SKU: 16451800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-50mm-66-t10-18-2-sku-16451800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 50 mm 66 T10/17-2 SKU: 16451700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-50-mm-66-t10-17-2-sku-16451700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 50mm 66 T10/16-2 SKU: 16451600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-50mm-66-t10-16-2-sku-16451600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 50mm 66 T10/15-2 SKU: 16451500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-50mm-66-t10-15-2-sku-16451500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 50mm 66 T10/14-2 SKU: 16451400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-50mm-66-t10-14-2-sku-16451400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 50 mm 66 T10/13-2 SKU: 16451300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-50-mm-66-t10-13-2-sku-16451300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 50mm 66 T10/12-2 SKU: 16451200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-50mm-66-t10-12-2-sku-16451200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 50 mm 66 T10/11-2 SKU: 16451100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-50-mm-66-t10-11-2-sku-16451100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 50 mm 66 T10/10-2 SKU: 16451000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-50-mm-66-t10-10-2-sku-16451000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 96 teeth for belt width 32 mm 47 T10/96-0 SKU: 16449600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-96-teeth-for-belt-width-32-mm-47-t10-96-0-sku-16449600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 84 teeth for belt width 32 mm 47 T10/84-0 SKU: 16448400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-84-teeth-for-belt-width-32-mm-47-t10-84-0-sku-16448400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 32 mm 47 T10/72-0 SKU: 16447200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-32-mm-47-t10-72-0-sku-16447200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 32mm 47 T10/60-0 SKU: 16446000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-32mm-47-t10-60-0-sku-16446000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 32mm 47 T10/48-0 SKU: 16444800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-32mm-47-t10-48-0-sku-16444800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 32mm 47 T10/44-0 SKU: 16444400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-32mm-47-t10-44-0-sku-16444400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 32mm 47 T10/40-2 SKU: 16444000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-32mm-47-t10-40-2-sku-16444000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 32mm 47 T10/36-2 SKU: 16443600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-32mm-47-t10-36-2-sku-16443600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 32mm 47 T10/32-2 SKU: 16443200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-32mm-47-t10-32-2-sku-16443200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 32mm 47 T10/30-2 SKU: 16443000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-32mm-47-t10-30-2-sku-16443000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 32mm 47 T10/28-2 SKU: 16442800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-32mm-47-t10-28-2-sku-16442800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 32mm 47 T10/27-2 SKU: 16442700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-32mm-47-t10-27-2-sku-16442700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 32mm 47 T10/26-2 SKU: 16442600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-32mm-47-t10-26-2-sku-16442600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 32mm 47 T10/25-2 SKU: 16442500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-32mm-47-t10-25-2-sku-16442500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 32mm 47 T10/24-2 SKU: 16442400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-32mm-47-t10-24-2-sku-16442400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 32mm 47 T10/22-2 SKU: 16442200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-32mm-47-t10-22-2-sku-16442200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 32mm 47 T10/20-2 SKU: 16442000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-32mm-47-t10-20-2-sku-16442000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 32mm 47 T10/19-2 SKU: 16441900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-32mm-47-t10-19-2-sku-16441900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 32mm 47 T10/18-2 SKU: 16441800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-32mm-47-t10-18-2-sku-16441800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 32 mm 47 T10/17-2 SKU: 16441700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-32-mm-47-t10-17-2-sku-16441700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 32mm 47 T10/16-2 SKU: 16441600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-32mm-47-t10-16-2-sku-16441600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 32mm 47 T10/15-2 SKU: 16441500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-32mm-47-t10-15-2-sku-16441500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 32mm 47 T10/14-2 SKU: 16441400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-32mm-47-t10-14-2-sku-16441400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 32 mm 47 T10/13-2 SKU: 16441300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-32-mm-47-t10-13-2-sku-16441300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 32mm 47 T10/12-2 SKU: 16441200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-32mm-47-t10-12-2-sku-16441200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 32 mm 47 T10/11-2 SKU: 16441100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-32-mm-47-t10-11-2-sku-16441100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 32 mm 47 T10/10-2 SKU: 16441000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-32-mm-47-t10-10-2-sku-16441000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 96 teeth for belt width 25 mm 40 T10/96-0 SKU: 16439600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-96-teeth-for-belt-width-25-mm-40-t10-96-0-sku-16439600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 84 teeth for belt width 25 mm 40 T10/84-0 SKU: 16438400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-84-teeth-for-belt-width-25-mm-40-t10-84-0-sku-16438400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 25 mm 40 T10/72-0 SKU: 16437200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-25-mm-40-t10-72-0-sku-16437200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 25mm 40 T10/60-0 SKU: 16436000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-25mm-40-t10-60-0-sku-16436000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 25mm 40 T10/48-0 SKU: 16434800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-25mm-40-t10-48-0-sku-16434800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 25mm 40 T10/44-0 SKU: 16434400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-25mm-40-t10-44-0-sku-16434400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 25mm 40 T10/40-2 SKU: 16434000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-25mm-40-t10-40-2-sku-16434000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 25mm 40 T10/36-2 SKU: 16433600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-25mm-40-t10-36-2-sku-16433600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 25mm 40 T10/32-2 SKU: 16433200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-25mm-40-t10-32-2-sku-16433200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 25mm 40 T10/30-2 SKU: 16433000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-25mm-40-t10-30-2-sku-16433000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 25mm 40 T10/28-2 SKU: 16432800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-25mm-40-t10-28-2-sku-16432800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 25mm 40 T10/27-2 SKU: 16432700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-25mm-40-t10-27-2-sku-16432700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 25mm 40 T10/26-2 SKU: 16432600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-25mm-40-t10-26-2-sku-16432600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 25mm 40 T10/25-2 SKU: 16432500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-25mm-40-t10-25-2-sku-16432500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 25mm 40 T10/24-2 SKU: 16432400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-25mm-40-t10-24-2-sku-16432400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 25mm 40 T10/22-2 SKU: 16432200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-25mm-40-t10-22-2-sku-16432200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 25mm 40 T10/20-2 SKU: 16432000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-25mm-40-t10-20-2-sku-16432000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 25mm 40 T10/19-2 SKU: 16431900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-25mm-40-t10-19-2-sku-16431900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 25mm 40 T10/18-2 SKU: 16431800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-25mm-40-t10-18-2-sku-16431800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 25 mm 40 T10/17-2 SKU: 16431700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-25-mm-40-t10-17-2-sku-16431700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 25mm 40 T10/16-2 SKU: 16431600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-25mm-40-t10-16-2-sku-16431600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 15 teeth for belt width 25mm 40 T10/15-2 SKU: 16431500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-15-teeth-for-belt-width-25mm-40-t10-15-2-sku-16431500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 14 teeth for belt width 25mm 40 T10/14-2 SKU: 16431400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-14-teeth-for-belt-width-25mm-40-t10-14-2-sku-16431400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 13 teeth for belt width 25 mm 40 T10/13-2 SKU: 16431300](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-13-teeth-for-belt-width-25-mm-40-t10-13-2-sku-16431300/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 12 teeth for belt width 25mm 40 T10/12-2 SKU: 16431200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-12-teeth-for-belt-width-25mm-40-t10-12-2-sku-16431200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 11 teeth for belt width 25 mm 40 T10/11-2 SKU: 16431100](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-11-teeth-for-belt-width-25-mm-40-t10-11-2-sku-16431100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 10 teeth for belt width 25 mm 40 T10/10-2 SKU: 16431000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-10-teeth-for-belt-width-25-mm-40-t10-10-2-sku-16431000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 96 teeth for belt width 16 mm 31 T10/96-0 SKU: 16429600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-96-teeth-for-belt-width-16-mm-31-t10-96-0-sku-16429600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 84 teeth for belt width 16 mm 31 T10/84-0 SKU: 16428400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-84-teeth-for-belt-width-16-mm-31-t10-84-0-sku-16428400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 72 teeth for belt width 16 mm 31 T10/72-0 SKU: 16427200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-72-teeth-for-belt-width-16-mm-31-t10-72-0-sku-16427200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 60 teeth for belt width 16mm 31 T10/60-0 SKU: 16426000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-60-teeth-for-belt-width-16mm-31-t10-60-0-sku-16426000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 48 teeth for belt width 16mm 31 T10/48-0 SKU: 16424800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-48-teeth-for-belt-width-16mm-31-t10-48-0-sku-16424800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 44 teeth for belt width 16mm 31 T10/44-0 SKU: 16424400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-44-teeth-for-belt-width-16mm-31-t10-44-0-sku-16424400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 40 teeth for belt width 16mm 31 T10/40-2 SKU: 16424000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-40-teeth-for-belt-width-16mm-31-t10-40-2-sku-16424000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 36 teeth for belt width 16mm 31 T10/36-2 SKU: 16423600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-36-teeth-for-belt-width-16mm-31-t10-36-2-sku-16423600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 32 teeth for belt width 16mm 31 T10/32-2 SKU: 16423200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-32-teeth-for-belt-width-16mm-31-t10-32-2-sku-16423200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 30 teeth for belt width 16mm 31 T10/30-2 SKU: 16423000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-30-teeth-for-belt-width-16mm-31-t10-30-2-sku-16423000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 28 teeth for belt width 16mm 31 T10/28-2 SKU: 16422800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-28-teeth-for-belt-width-16mm-31-t10-28-2-sku-16422800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 27 teeth for belt width 16mm 31 T10/27-2 SKU: 16422700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-27-teeth-for-belt-width-16mm-31-t10-27-2-sku-16422700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 26 teeth for belt width 16mm 31 T10/26-2 SKU: 16422600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-26-teeth-for-belt-width-16mm-31-t10-26-2-sku-16422600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 25 teeth for belt width 16mm 31 T10/25-2 SKU: 16422500](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-25-teeth-for-belt-width-16mm-31-t10-25-2-sku-16422500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 24 teeth for belt width 16mm 31 T10/24-2 SKU: 16422400](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-24-teeth-for-belt-width-16mm-31-t10-24-2-sku-16422400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 22 teeth for belt width 16mm 31 T10/22-2 SKU: 16422200](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-22-teeth-for-belt-width-16mm-31-t10-22-2-sku-16422200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 20 teeth for belt width 16mm 31 T10/20-2 SKU: 16422000](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-20-teeth-for-belt-width-16mm-31-t10-20-2-sku-16422000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 19 teeth for belt width 16mm 31 T10/19-2 SKU: 16421900](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-19-teeth-for-belt-width-16mm-31-t10-19-2-sku-16421900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 18 teeth for belt width 16mm 31 T10/18-2 SKU: 16421800](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-18-teeth-for-belt-width-16mm-31-t10-18-2-sku-16421800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 17 teeth for belt width 16 mm 31 T10/17-2 SKU: 16421700](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-17-teeth-for-belt-width-16-mm-31-t10-17-2-sku-16421700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley T10 material aluminium 16 teeth for belt width 16mm 31 T10/16-2 SKU: 16421600](https://maedler.in/product/timing-belt-pulley-t10-material-aluminium-16-teeth-for-belt-width-16mm-31-t10-16-2-sku-16421600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Straight adaptor with o-ring thread G1/4A tube outer diameter 4mm SKU: 86010428](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-4a-tube-outer-diameter-4mm-sku-86010428/): Ø A [mm] 4 B [mm] G1/4A C [mm] 20,5 SW [mm] 15 E [mm] 2,5 Ø F [mm] – G [mm] 7 Weight [g] 14 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/8A tube outer diameter 4mm SKU: 86010418](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-8a-tube-outer-diameter-4mm-sku-86010418/): Ø A [mm] 4 B [mm] G1/8A C [mm] 19 SW [mm] 12 E [mm] 2,5 Ø F [mm] – G [mm] 6 Weight [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with sealing ring thread M5, tube outer diameter 4mm SKU: 86010405](https://maedler.in/product/straight-adaptor-with-sealing-ring-thread-m5-tube-outer-diameter-4mm-sku-86010405/): Ø A [mm] 4 B [mm] M5 C [mm] 20 SW [mm] – E [mm] 2,0 Ø F [mm] 8,8 G [mm] 4 Weight [g] 4 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with sealing ring thread M3, tube outer diameter 4mm SKU: 86010403](https://maedler.in/product/straight-adaptor-with-sealing-ring-thread-m3-tube-outer-diameter-4mm-sku-86010403/): Ø A [mm] 4 B [mm] M3 C [mm] 18 SW [mm] – E [mm] 1,5 Ø F [mm] 8,5 G [mm] 3 Weight [g] 4 CATALOG PRODUCT PAGE CAD FILES (download) - [Spare magnet for magnet type 1 DIN 43650, shape B for 24V DC SKU: 85800006](https://maedler.in/product/spare-magnet-for-magnet-type-1-din-43650-shape-b-for-24v-dc-sku-85800006/): Voltage 24 V DC CATALOG PRODUCT PAGE CAD FILES (download) - [Electric socket to DIN 43650, shape B without cable SKU: 85800001](https://maedler.in/product/electric-socket-to-din-43650-shape-b-without-cable-sku-85800001/): Shape B Operating Temperature °C -40 bis +125 Operating Voltage V 12 bis 250 DC/AC Weight [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [2/2 solenoid valve DN 20 port G3/4 230V 50/60Hz SKU: 85123412](https://maedler.in/product/2-2-solenoid-valve-dn-20-port-g3-4-230v-50-60hz-sku-85123412/): Voltage 230 V 50/60Hz Connector Size G3/4 Nominal Width [mm] 20 Length [mm] 80 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 5,8 Weight [kg] 1 Ø A [mm] 50 H [mm] 115 H1 [mm] 99 L [mm] 80 L1 [mm] 36,5 T [mm] 16 CATALOG PRODUCT […] - [2/2 solenoid valve DN 20 port G3/4, 24V DC SKU: 85123411](https://maedler.in/product/2-2-solenoid-valve-dn-20-port-g3-4-24v-dc-sku-85123411/): Voltage 24 VDC Connector Size G3/4 Nominal Width [mm] 20 Length [mm] 80 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 5,8 Weight [kg] 1 Ø A [mm] 50 H [mm] 115 H1 [mm] 99 L [mm] 80 L1 [mm] 36,5 T [mm] 16 CATALOG PRODUCT PAGE […] - [2/2 solenoid valve DN 25 port G1 230V 50/60Hz SKU: 85121012](https://maedler.in/product/2-2-solenoid-valve-dn-25-port-g1-230v-50-60hz-sku-85121012/): Voltage 230 V 50/60Hz Connector Size G1 Nominal Width [mm] 25 Length [mm] 95 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 8 Weight [kg] 1,3 Ø A [mm] 62 H [mm] 124 H1 [mm] 103,5 L [mm] 95 L1 [mm] 44 T [mm] 18 CATALOG PRODUCT […] - [2/2 solenoid valve DN 25 port G1, 24V DC SKU: 85121011](https://maedler.in/product/2-2-solenoid-valve-dn-25-port-g1-24v-dc-sku-85121011/): Voltage 24 VDC Connector Size G1 Nominal Width [mm] 25 Length [mm] 95 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 8 Weight [kg] 1,3 Ø A [mm] 62 H [mm] 124 H1 [mm] 103,5 L [mm] 95 L1 [mm] 44 T [mm] 18 CATALOG PRODUCT PAGE […] - [2/2 solenoid valve DN 10 port G3/8 230V 50/60Hz SKU: 85113812](https://maedler.in/product/2-2-solenoid-valve-dn-10-port-g3-8-230v-50-60hz-sku-85113812/): Voltage 230 V 50/60Hz Connector Size G3/8 Nominal Width [mm] 10 Length [mm] 44 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 1,7 Weight [kg] 0,5 L [mm] 44 H [mm] 87 H1 [mm] 73 B [mm] 14 SW [mm] 21 T [mm] 12 CATALOG PRODUCT PAGE […] - [2/2 solenoid valve DN 10 port G3/8, 24V DC SKU: 85113811](https://maedler.in/product/2-2-solenoid-valve-dn-10-port-g3-8-24v-dc-sku-85113811/): Voltage 24 VDC Connector Size G3/8 Nominal Width [mm] 10 Length [mm] 44 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 1,7 Weight [kg] 0,5 L [mm] 44 H [mm] 87 H1 [mm] 73 B [mm] 14 SW [mm] 21 T [mm] 12 CATALOG PRODUCT PAGE CAD […] - [2/2 solenoid valve DN 10 port G1/4 230V 50/60Hz SKU: 85111412](https://maedler.in/product/2-2-solenoid-valve-dn-10-port-g1-4-230v-50-60hz-sku-85111412/): Voltage 230 V 50/60Hz Connector Size G1/4 Nominal Width [mm] 10 Length [mm] 44 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 1,5 Weight [kg] 0,5 L [mm] 44 H [mm] 87 H1 [mm] 73 B [mm] 14 SW [mm] 21 T [mm] 12 CATALOG PRODUCT PAGE […] - [2/2 solenoid valve DN 10 port G1/4, 24V DC SKU: 85111411](https://maedler.in/product/2-2-solenoid-valve-dn-10-port-g1-4-24v-dc-sku-85111411/): Voltage 24 VDC Connector Size G1/4 Nominal Width [mm] 10 Length [mm] 44 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 1,5 Weight [kg] 0,5 L [mm] 44 H [mm] 87 H1 [mm] 73 B [mm] 14 SW [mm] 21 T [mm] 12 CATALOG PRODUCT PAGE CAD […] - [2/2 solenoid valve DN 10 port G1/2 230V 50/60Hz SKU: 85111212](https://maedler.in/product/2-2-solenoid-valve-dn-10-port-g1-2-230v-50-60hz-sku-85111212/): Voltage 230 V 50/60Hz Connector Size G1/2 Nominal Width [mm] 10 Length [mm] 60 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 1,7 Weight [kg] 0,6 L [mm] 60 H [mm] 90 H1 [mm] 74,5 B [mm] 14 SW [mm] 21 T [mm] 15 CATALOG PRODUCT PAGE […] - [2/2 solenoid valve DN 10 port G1/2 24V DC SKU: 85111211](https://maedler.in/product/2-2-solenoid-valve-dn-10-port-g1-2-24v-dc-sku-85111211/): Voltage 24 VDC Connector Size G1/2 Nominal Width [mm] 10 Length [mm] 60 Op. Pressure* min. [0.1 MPa] 0 Op. Pressure* max. [0.1 MPa] 10 kv Value** Base [m³/h] 1,7 Weight [kg] 0,6 L [mm] 60 H [mm] 90 H1 [mm] 74,5 B [mm] 14 SW [mm] 21 T [mm] 15 CATALOG PRODUCT PAGE CAD […] - [gauge, operating pressure 0-10 bar SKU: 83003700](https://maedler.in/product/gauge-operating-pressure-0-10-bar-sku-83003700/): Connector R 1/8 Ø [mm] 40 Weight [g] 720 CATALOG PRODUCT PAGE CAD FILES (download) - [Panel nut SKU: 83003500](https://maedler.in/product/panel-nut-sku-83003500/): Weight [g] 300 CATALOG PRODUCT PAGE CAD FILES (download) - [Universal-mounting bracket, round version SKU: 83003300](https://maedler.in/product/universal-mounting-bracket-round-version-sku-83003300/): Weight [g] 720 CATALOG PRODUCT PAGE CAD FILES (download) - [Universal-mounting bracket, square version SKU: 83003100](https://maedler.in/product/universal-mounting-bracket-square-version-sku-83003100/): Weight [g] 600 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-way shut off valve, manual switching port G1/4 SKU: 83002200](https://maedler.in/product/3-2-way-shut-off-valve-manual-switching-port-g1-4-sku-83002200/): Connector G 1/4 Weight [g] 2930 CATALOG PRODUCT PAGE CAD FILES (download) - [Relief valve, port G1/4 SKU: 83001700](https://maedler.in/product/relief-valve-port-g1-4-sku-83001700/): Connector G 1/4 Weight [g] 330 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Lubricator, port G1/4 SKU: 83001500](https://maedler.in/product/lubricator-port-g1-4-sku-83001500/): Connector G 1/4 Type Normalnebel-Öler Weight [g] 520 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Lubricator, port G1/4 SKU: 83001300](https://maedler.in/product/lubricator-port-g1-4-sku-83001300/): Connector G 1/4 Type Mikronebel-Öler Weight [g] 520 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Filter regulator, port G1/4 SKU: 83001100](https://maedler.in/product/filter-regulator-port-g1-4-sku-83001100/): Connector G 1/4 Weight [g] 520 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Air filter, port G1/4 SKU: 83000700](https://maedler.in/product/air-filter-port-g1-4-sku-83000700/): Connector G 1/4 Weight [g] 490 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Regulator relieving, port G1/4 SKU: 83000500](https://maedler.in/product/regulator-relieving-port-g1-4-sku-83000500/): Connector G1/4 Weight [g] 360 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Combined filter-regulator with shut off valve, port G1/4 SKU: 83000300](https://maedler.in/product/combined-filter-regulator-with-shut-off-valve-port-g1-4-sku-83000300/): Connector G1/4 Stop Valve Mit Weight [g] 1415 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Combined filter-regulator without shut off valve, port G1/4 SKU: 83000100](https://maedler.in/product/combined-filter-regulator-without-shut-off-valve-port-g1-4-sku-83000100/): Connector G1/4 Stop Valve Ohne Weight [g] 1122 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Magnetic switch, inductive, pnp with connector cable length 0,3m SKU: 81000006](https://maedler.in/product/magnetic-switch-inductive-pnp-with-connector-cable-length-03m-sku-81000006/): Function pnp, mit Stecker Cable Length [m] 0,3 Weight [g] 16 CATALOG PRODUCT PAGE CAD FILES (download) - [Magnetic switch, inductive, pnp without connector cable length 5m SKU: 81000004](https://maedler.in/product/magnetic-switch-inductive-pnp-without-connector-cable-length-5m-sku-81000004/): Function pnp, ohne Stecker Cable Length [m] 5,0 Weight [g] 92 CATALOG PRODUCT PAGE CAD FILES (download) - [Magnetic switch with dry reed contact, N/O switch with connector cable length 0,3m SKU: 81000003](https://maedler.in/product/magnetic-switch-with-dry-reed-contact-n-o-switch-with-connector-cable-length-03m-sku-81000003/): Function Schließer, mit Stecker Cable Length [m] 0,3 Weight [g] 16 CATALOG PRODUCT PAGE CAD FILES (download) - [Magnetic switch with dry reed contact, Wechsler without connector cable length 5m SKU: 81000002](https://maedler.in/product/magnetic-switch-with-dry-reed-contact-wechsler-without-connector-cable-length-5m-sku-81000002/): Function Wechsler, ohne Stecker Cable Length [m] 5,0 Weight [g] 92 CATALOG PRODUCT PAGE CAD FILES (download) - [Magnetic switch with dry reed contact, N/O switch without connector cable length 5m SKU: 81000001](https://maedler.in/product/magnetic-switch-with-dry-reed-contact-n-o-switch-without-connector-cable-length-5m-sku-81000001/): Function Schließer, ohne Stecker Cable Length [m] 5,0 Weight [g] 92 CATALOG PRODUCT PAGE CAD FILES (download) - [Electric socket with cable for magnetic switch 81000003, 81000006 and 81000007 cable length 5m SKU: 81000000](https://maedler.in/product/electric-socket-with-cable-for-magnetic-switch-81000003-81000006-and-81000007-cable-length-5m-sku-81000000/): Function Steckdose mit Kabel f. Art. 81000006-810 Cable Length [m] 5,0 Weight [g] 150 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 12 teeth made of cast iron 20 DIN 766 outer diameter 250mm, for diameter 10 mm SKU: 77161200](https://maedler.in/product/chain-wheel-12-teeth-made-of-cast-iron-20-din-766-outer-diameter-250mm-for-diameter-10-mm-sku-77161200/): No. of Teeth 12 da [mm] 250 d [mm] 214 b [mm] 52 ND [mm] 140 L [mm] 75 B approx. [mm] 20 Weight [kg] 13,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 8 teeth made of cast iron 20 DIN 766 outer diameter 170mm, for diameter 10 mm SKU: 77160800](https://maedler.in/product/chain-wheel-8-teeth-made-of-cast-iron-20-din-766-outer-diameter-170mm-for-diameter-10-mm-sku-77160800/): No. of Teeth 8 da [mm] 170 d [mm] 140 b [mm] 50 ND [mm] 80 L [mm] 65 B approx. [mm] 20 Weight [kg] 6,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 5 teeth made of cast iron 20 DIN 766 outer diameter 115mm, for diameter 10 mm SKU: 77160500](https://maedler.in/product/chain-wheel-5-teeth-made-of-cast-iron-20-din-766-outer-diameter-115mm-for-diameter-10-mm-sku-77160500/): No. of Teeth 5 da [mm] 115 d [mm] 89 b [mm] 56 ND [mm] 60 L [mm] 65 B approx. [mm] 10 Weight [kg] 3,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 24 teeth made of cast iron 20 DIN 766 outer diameter 390mm, for diameter 8 mm SKU: 77142400](https://maedler.in/product/chain-wheel-24-teeth-made-of-cast-iron-20-din-766-outer-diameter-390mm-for-diameter-8-mm-sku-77142400/): No. of Teeth 24 da [mm] 390 d [mm] 367 b [mm] 46 ND [mm] 120 L [mm] 70 B approx. [mm] 25 Weight [kg] 15,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel , 18 teeth made of cast iron 20 DIN 766 outer diameter 305mm, for diameter 8 mm SKU: 77141800](https://maedler.in/product/chain-wheel-18-teeth-made-of-cast-iron-20-din-766-outer-diameter-305mm-for-diameter-8-mm-sku-77141800/): No. of Teeth 18 da [mm] 305 d [mm] 275 b [mm] 46 ND [mm] 90 L [mm] 70 B approx. [mm] 20 Weight [kg] 12,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 14 teeth made of cast iron 20 DIN 766 outer diameter 245mm, for diameter 8 mm SKU: 77141400](https://maedler.in/product/chain-wheel-14-teeth-made-of-cast-iron-20-din-766-outer-diameter-245mm-for-diameter-8-mm-sku-77141400/): No. of Teeth 14 da [mm] 245 d [mm] 214 b [mm] 45 ND [mm] 80 L [mm] 65 B approx. [mm] 20 Weight [kg] 7,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 12 teeth made of cast iron 20 DIN 766 outer diameter 212mm, for diameter 8 mm SKU: 77141200](https://maedler.in/product/chain-wheel-12-teeth-made-of-cast-iron-20-din-766-outer-diameter-212mm-for-diameter-8-mm-sku-77141200/): No. of Teeth 12 da [mm] 212 d [mm] 183 b [mm] 45 ND [mm] 80 L [mm] 65 B approx. [mm] 20 Weight [kg] 6,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 10 teeth made of cast iron 20 DIN 766 outer diameter 180mm, for diameter 8 mm SKU: 77141000](https://maedler.in/product/chain-wheel-10-teeth-made-of-cast-iron-20-din-766-outer-diameter-180mm-for-diameter-8-mm-sku-77141000/): No. of Teeth 10 da [mm] 180 d [mm] 153 b [mm] 45 ND [mm] 80 L [mm] 65 B approx. [mm] 20 Weight [kg] 5,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 8 teeth made of cast iron 20, DIN 766 outer diameter 162mm, for diameter 8 mm SKU: 77140800](https://maedler.in/product/chain-wheel-8-teeth-made-of-cast-iron-20-din-766-outer-diameter-162mm-for-diameter-8-mm-sku-77140800/): No. of Teeth 8 da [mm] 162 d [mm] 122 b [mm] 45 ND [mm] 80 L [mm] 65 B approx. [mm] 12 Weight [kg] 4,6 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 6 teeth made of cast iron 20 DIN 766 outer diameter 115mm, for diameter 8 mm SKU: 77140600](https://maedler.in/product/chain-wheel-6-teeth-made-of-cast-iron-20-din-766-outer-diameter-115mm-for-diameter-8-mm-sku-77140600/): No. of Teeth 6 da [mm] 115 d [mm] 92 b [mm] 45 ND [mm] 80 L [mm] 65 B approx. [mm] 10 Weight [kg] 3,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 50 teeth made of cast iron 20 DIN 766 outer diameter 620mm, for diameter 5/6 mm SKU: 77125000](https://maedler.in/product/chain-wheel-50-teeth-made-of-cast-iron-20-din-766-outer-diameter-620mm-for-diameter-5-6-mm-sku-77125000/): No. of Teeth 50 da [mm] 620 d [mm] 589 b [mm] 41 ND [mm] 100 L [mm] 75 B approx. [mm] 25 Weight [kg] 27,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 40 teeth made of cast iron 20 DIN 766 outer diameter 500mm, for diameter 5/6 mm SKU: 77124000](https://maedler.in/product/chain-wheel-40-teeth-made-of-cast-iron-20-din-766-outer-diameter-500mm-for-diameter-5-6-mm-sku-77124000/): No. of Teeth 40 da [mm] 500 d [mm] 470 b [mm] 39 ND [mm] 100 L [mm] 75 B approx. [mm] 25 Weight [kg] 17,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 36 teeth made of cast iron 20 DIN 766 outer diameter 450mm, for diameter 5/6 mm SKU: 77123600](https://maedler.in/product/chain-wheel-36-teeth-made-of-cast-iron-20-din-766-outer-diameter-450mm-for-diameter-5-6-mm-sku-77123600/): No. of Teeth 36 da [mm] 450 d [mm] 424 b [mm] 35 ND [mm] 90 L [mm] 85 B approx. [mm] 25 Weight [kg] 12,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 30 teeth made of cast iron 20 DIN 766 outer diameter 380mm, for diameter 5/6 mm SKU: 77123000](https://maedler.in/product/chain-wheel-30-teeth-made-of-cast-iron-20-din-766-outer-diameter-380mm-for-diameter-5-6-mm-sku-77123000/): No. of Teeth 30 da [mm] 380 d [mm] 353 b [mm] 35 ND [mm] 70 L [mm] 60 B approx. [mm] 25 Weight [kg] 9,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 26 teeth made of cast iron 20 DIN 766 outer diameter 335mm, for diameter 5/6 mm SKU: 77122600](https://maedler.in/product/chain-wheel-26-teeth-made-of-cast-iron-20-din-766-outer-diameter-335mm-for-diameter-5-6-mm-sku-77122600/): No. of Teeth 26 da [mm] 335 d [mm] 306 b [mm] 37 ND [mm] 70 L [mm] 60 B approx. [mm] 25 Weight [kg] 7,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 24 teeth made of cast iron 20 DIN 766 outer diameter 300mm, for diameter 5/6 mm SKU: 77122400](https://maedler.in/product/chain-wheel-24-teeth-made-of-cast-iron-20-din-766-outer-diameter-300mm-for-diameter-5-6-mm-sku-77122400/): No. of Teeth 24 da [mm] 300 d [mm] 283 b [mm] 33 ND [mm] 60 L [mm] 50 B approx. [mm] 20 Weight [kg] 5,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 20 teeth made of cast iron 20 DIN 766 outer diameter 260mm, for diameter 5/6 mm SKU: 77122000](https://maedler.in/product/chain-wheel-20-teeth-made-of-cast-iron-20-din-766-outer-diameter-260mm-for-diameter-5-6-mm-sku-77122000/): No. of Teeth 20 da [mm] 260 d [mm] 236 b [mm] 33 ND [mm] 60 L [mm] 55 (später 50) B approx. [mm] 20 Weight [kg] 5,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 18 teeth made of cast iron 20 DIN 766 outer diameter 235mm, for diameter 5/6 mm SKU: 77121800](https://maedler.in/product/chain-wheel-18-teeth-made-of-cast-iron-20-din-766-outer-diameter-235mm-for-diameter-5-6-mm-sku-77121800/): No. of Teeth 18 da [mm] 235 d [mm] 212 b [mm] 35 ND [mm] 60 L [mm] 50 B approx. [mm] 15 Weight [kg] 5,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 16 teeth made of cast iron 20 DIN 766 outer diameter 215mm, for diameter 5/6 mm SKU: 77121600](https://maedler.in/product/chain-wheel-16-teeth-made-of-cast-iron-20-din-766-outer-diameter-215mm-for-diameter-5-6-mm-sku-77121600/): No. of Teeth 16 da [mm] 215 d [mm] 188 b [mm] 31 ND [mm] 65 L [mm] 50 B approx. [mm] 15 Weight [kg] 3,8 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 15 teeth made of cast iron 20 DIN 766 outer diameter 200mm, for diameter 5/6 mm SKU: 77121500](https://maedler.in/product/chain-wheel-15-teeth-made-of-cast-iron-20-din-766-outer-diameter-200mm-for-diameter-5-6-mm-sku-77121500/): No. of Teeth 15 da [mm] 200 d [mm] 177 b [mm] 32 ND [mm] 65 L [mm] 50 B approx. [mm] 12 Weight [kg] 3,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 14 teeth made of cast iron 20 DIN 766 outer diameter 185mm, for diameter 5/6 mm SKU: 77121400](https://maedler.in/product/chain-wheel-14-teeth-made-of-cast-iron-20-din-766-outer-diameter-185mm-for-diameter-5-6-mm-sku-77121400/): No. of Teeth 14 da [mm] 185 d [mm] 165 b [mm] 32 ND [mm] 65 L [mm] 50 B approx. [mm] 12 Weight [kg] 4,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 12 teeth made of cast iron 20 DIN 766 outer diameter 165mm, for diameter 5/6 mm SKU: 77121200](https://maedler.in/product/chain-wheel-12-teeth-made-of-cast-iron-20-din-766-outer-diameter-165mm-for-diameter-5-6-mm-sku-77121200/): No. of Teeth 12 da [mm] 165 d [mm] 141 b [mm] 33 ND [mm] 60 L [mm] 50 B approx. [mm] 10 Weight [kg] 3,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 10 teeth made of cast iron 20 DIN 766 outer diameter 135mm, for diameter 5/6 mm SKU: 77121000](https://maedler.in/product/chain-wheel-10-teeth-made-of-cast-iron-20-din-766-outer-diameter-135mm-for-diameter-5-6-mm-sku-77121000/): No. of Teeth 10 da [mm] 135 d [mm] 118 b [mm] 32 ND [mm] 60 L [mm] 50 B approx. [mm] 10 Weight [kg] 2,4 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 8 teeth made of cast iron 20 DIN 766 outer diameter 120 mm, for diameter 5/6 mm SKU: 77120800](https://maedler.in/product/chain-wheel-8-teeth-made-of-cast-iron-20-din-766-outer-diameter-120-mm-for-diameter-5-6-mm-sku-77120800/): No. of Teeth 8 da [mm] 120 d [mm] 94 b [mm] 32 ND [mm] 50 L [mm] 50 B approx. [mm] 8 Weight [kg] 2,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel 7 teeth, made of cast iron 20 DIN 766 outer diameter 110 mm, for diameter 5/6 SKU: 77120700](https://maedler.in/product/chain-wheel-7-teeth-made-of-cast-iron-20-din-766-outer-diameter-110-mm-for-diameter-5-6-sku-77120700/): No. of Teeth 7 da [mm] 110 d [mm] 82 b [mm] 34 ND [mm] 60 L [mm] 50 B approx. [mm] 8 Weight [kg] 1,9 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 6 teeth made of cast iron 20 DIN 766 outer diameter 95 mm, for diameter 5/6 mm SKU: 77120600](https://maedler.in/product/chain-wheel-6-teeth-made-of-cast-iron-20-din-766-outer-diameter-95-mm-for-diameter-5-6-mm-sku-77120600/): No. of Teeth 6 da [mm] 95 d [mm] 71 b [mm] 32 ND [mm] 50 L [mm] 50 B approx. [mm] 8 Weight [kg] 1,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 18 teeth made of cast iron 20 DIN 766 outer diameter 200 mm, for diameter 4 mm SKU: 77111800](https://maedler.in/product/chain-wheel-18-teeth-made-of-cast-iron-20-din-766-outer-diameter-200-mm-for-diameter-4-mm-sku-77111800/): No. of Teeth 18 da [mm] 200 d [mm] 183 b [mm] 26 ND [mm] 50 L [mm] 40 B approx. [mm] 10 Weight [kg] 2,6 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 15 teeth made of cast iron 20 DIN 766 outer diameter 165mm, for diameter 4 mm SKU: 77111500](https://maedler.in/product/chain-wheel-15-teeth-made-of-cast-iron-20-din-766-outer-diameter-165mm-for-diameter-4-mm-sku-77111500/): No. of Teeth 15 da [mm] 165 d [mm] 153 b [mm] 24 ND [mm] 50 L [mm] 40 B approx. [mm] 8 Weight [kg] 2,4 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 12 teeth made of cast iron 20 DIN 766 outer diameter 140 mm, for diameter 4 mm SKU: 77111200](https://maedler.in/product/chain-wheel-12-teeth-made-of-cast-iron-20-din-766-outer-diameter-140-mm-for-diameter-4-mm-sku-77111200/): No. of Teeth 12 da [mm] 140 d [mm] 122 b [mm] 25 ND [mm] 50 L [mm] 40 B approx. [mm] 8 Weight [kg] 1,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 8 teeth made of cast iron 20 DIN 766 outer diameter 96 mm, for diameter 4 mm SKU: 77110800](https://maedler.in/product/chain-wheel-8-teeth-made-of-cast-iron-20-din-766-outer-diameter-96-mm-for-diameter-4-mm-sku-77110800/): No. of Teeth 8 da [mm] 96 d [mm] 81 b [mm] 29 ND [mm] 50 L [mm] 35 B approx. [mm] 8 Weight [kg] 1,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel, 4 teeth made of cast iron 20 DIN 766 outer diameter 56 mm, for diameter 4 mm SKU: 77110400](https://maedler.in/product/chain-wheel-4-teeth-made-of-cast-iron-20-din-766-outer-diameter-56-mm-for-diameter-4-mm-sku-77110400/): No. of Teeth 4 da [mm] 56 d [mm] 41 b [mm] 24 ND [mm] 40 L [mm] 30 B approx. [mm] 8 Weight [kg] 0,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Spare chain link RN for chain DIN 766A material 1.4401 (AISI316) diameter 10mm SKU: 77099140](https://maedler.in/product/spare-chain-link-rn-for-chain-din-766a-material-1-4401-aisi316-diameter-10mm-sku-77099140/): Nominal size 10 d ≈ [mm] 9,2 t ≈ [mm] 29,5 b ≈ [mm] 34,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Spare chain link RN for chain DIN 766A material 1.4401 (AISI316) diameter 8 mm SKU: 77099138](https://maedler.in/product/spare-chain-link-rn-for-chain-din-766a-material-1-4401-aisi316-diameter-8-mm-sku-77099138/): Nominal size 8 d ≈ [mm] 7,5 t ≈ [mm] 24,8 b ≈ [mm] 28,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Spare chain link RN for chain DIN 766A material 1.4401 (AISI316) diameter 6 mm SKU: 77099136](https://maedler.in/product/spare-chain-link-rn-for-chain-din-766a-material-1-4401-aisi316-diameter-6-mm-sku-77099136/): Nominal size 6 d ≈ [mm] 5,7 t ≈ [mm] 21,7 b ≈ [mm] 22,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Spare chain link RN for chain DIN 766A material 1.4401 (AISI316) diameter 5 mm SKU: 77099135](https://maedler.in/product/spare-chain-link-rn-for-chain-din-766a-material-1-4401-aisi316-diameter-5-mm-sku-77099135/): Nominal size 5 d ≈ [mm] 5,0 t ≈ [mm] 17,5 b ≈ [mm] 19,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain similar to DIN 766A quality class 3 diameter 10 mm stainless steel SKU: 77099010](https://maedler.in/product/round-link-steel-chain-similar-to-din-766a-quality-class-3-diameter-10-mm-stainless-steel-sku-77099010/): Nenngröße 10 x 28 d [mm] 10 t [mm] 28 b [mm] 34 Working load [N] 10000 Minimum Braking Load [N] 40000 Weight [kg/m] 2,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain similar to DIN 766A quality class 3 diameter 8 mm stainless steel SKU: 77099008](https://maedler.in/product/round-link-steel-chain-similar-to-din-766a-quality-class-3-diameter-8-mm-stainless-steel-sku-77099008/): Nenngröße 8 x 24 d [mm] 8 t [mm] 24 b [mm] 26 Working load [N] 8000 Minimum Braking Load [N] 32000 Weight [kg/m] 1,35 Notice ** CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain similar to DIN 766A quality class 3 diameter 6 mm stainless steel SKU: 77099006](https://maedler.in/product/round-link-steel-chain-similar-to-din-766a-quality-class-3-diameter-6-mm-stainless-steel-sku-77099006/): Nenngröße 6 x 18,5 d [mm] 6 t [mm] 18,5 b [mm] 20 Working load [N] 4000 Minimum Braking Load [N] 16000 Weight [kg/m] 0,75 Notice ** CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain similar to DIN 766A quality class 3 diameter 5 mm stainless steel SKU: 77099005](https://maedler.in/product/round-link-steel-chain-similar-to-din-766a-quality-class-3-diameter-5-mm-stainless-steel-sku-77099005/): Nenngröße 5 x 18,5 d [mm] 5 t [mm] 18,5 b [mm] 17 Working load [N] 3200 Minimum Braking Load [N] 12000 Weight [kg/m] 0,5 Notice ** CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain similar to DIN 766A quality class 3 diameter 4 mm stainless steel SKU: 77099004](https://maedler.in/product/round-link-steel-chain-similar-to-din-766a-quality-class-3-diameter-4-mm-stainless-steel-sku-77099004/): Nenngröße 4 x 16 d [mm] 4 t [mm] 16 b [mm] 14 Working load [N] 2000 Minimum Braking Load [N] 8000 Weight [kg/m] 0,32 Notice ** CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 250mm for diameter 10 mm SKU: 77071200](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-outer-diameter-250mm-for-diameter-10-mm-sku-77071200/): da [mm] 250 d [mm] 214 b [mm] 52 ND [mm] 140 L [mm] 75 B approx. [mm] 20 Weight [kg] 13 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 115mm for diameter 10 mm SKU: 77070500](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-outer-diameter-115mm-for-diameter-10-mm-sku-77070500/): da [mm] 115 d [mm] 89 b [mm] 56 ND [mm] 60 L [mm] 65 B approx. [mm] 10 Weight [kg] 3 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 212mm for diameter 8 mm SKU: 77061200](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-outer-diameter-212mm-for-diameter-8-mm-sku-77061200/): da [mm] 212 d [mm] 183 b [mm] 45 ND [mm] 80 L [mm] 65 B approx. [mm] 20 Weight [kg] 6,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 162mm for diameter 8 mm SKU: 77060800](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-outer-diameter-162mm-for-diameter-8-mm-sku-77060800/): da [mm] 162 d [mm] 122 b [mm] 45 ND [mm] 80 L [mm] 65 B approx. [mm] 12 Weight [kg] 5,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 115mm for diameter 8 mm SKU: 77060700](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-outer-diameter-115mm-for-diameter-8-mm-sku-77060700/): da [mm] 117 d [mm] 107 b [mm] 41 ND [mm] 80 L [mm] 65 B approx. [mm] 10 Weight [kg] 3,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 200mm for diameter 5/6 mm SKU: 77051500](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-outer-diameter-200mm-for-diameter-5-6-mm-sku-77051500/): da [mm] 200 d [mm] 177 b [mm] 32 ND [mm] 65 L [mm] 50 B approx. [mm] 12 Weight [kg] 3,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 Außendurchnesser 165mm for diameter 5/6 SKU: 77051200](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-ausendurchnesser-165mm-for-diameter-5-6-sku-77051200/): da [mm] 165 d [mm] 141 b [mm] 33 ND [mm] 60 L [mm] 50 B approx. [mm] 10 Weight [kg] 3,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains cast iron 20 DIN 766 outer diameter 120 mm for diameter 5/6 mm SKU: 77050800](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-cast-iron-20-din-766-outer-diameter-120-mm-for-diameter-5-6-mm-sku-77050800/): da [mm] 120 d [mm] 94 b [mm] 32 ND [mm] 50 L [mm] 50 B approx. [mm] 8 Weight [kg] 2,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 95 mm for diameter 5/6 mm SKU: 77050600](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-outer-diameter-95-mm-for-diameter-5-6-mm-sku-77050600/): da [mm] 95 d [mm] 71 b [mm] 32 ND [mm] 50 L [mm] 50 B approx. [mm] 8 Weight [kg] 1,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 96 mm for diameter 4 mm SKU: 77040800](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-outer-diameter-96-mm-for-diameter-4-mm-sku-77040800/): da [mm] 96 d [mm] 81 b [mm] 23 ND [mm] 50 L [mm] 35 B approx. [mm] 8 Weight [kg] 1,0 CATALOG PRODUCT PAGE CAD FILES (download) - [Chain wheel for round link steel chains made of cast iron 20 DIN 766 outer diameter 56 mm for diameter 4 mm SKU: 77040400](https://maedler.in/product/chain-wheel-for-round-link-steel-chains-made-of-cast-iron-20-din-766-outer-diameter-56-mm-for-diameter-4-mm-sku-77040400/): da [mm] 56 d [mm] 41 b [mm] 23 ND [mm] 40 L [mm] 30 B approx. [mm] 8 Weight [kg] 0,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain DIN 766A quality class 3 diameter 10 mm glavanic zinc-plated SKU: 77011000](https://maedler.in/product/round-link-steel-chain-din-766a-quality-class-3-diameter-10-mm-glavanic-zinc-plated-sku-77011000/): Type 10 x 28 d [mm] 10 t [mm] 28,0 b [mm] 34 Working load [N] 10000 Min. Breaking Load [N] 50000 Weight [kg/m] 2,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain DIN 766A quality class 3 diameter 8 mm glavanic zinc-plated SKU: 77010800](https://maedler.in/product/round-link-steel-chain-din-766a-quality-class-3-diameter-8-mm-glavanic-zinc-plated-sku-77010800/): Type 8 x 24 d [mm] 8 t [mm] 24,0 b [mm] 26 Working load [N] 8000 Min. Breaking Load [N] 32000 Weight [kg/m] 1,35 Notice ** CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain DIN 766A quality class 3 diameter 6 mm glavanic zinc-plated SKU: 77010600](https://maedler.in/product/round-link-steel-chain-din-766a-quality-class-3-diameter-6-mm-glavanic-zinc-plated-sku-77010600/): Type 6 x 18,5 d [mm] 6 t [mm] 18,5 b [mm] 20 Working load [N] 4000 Min. Breaking Load [N] 16000 Weight [kg/m] 0,75 Notice ** CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain DIN 766A quality class 3 diameter 5 mm glavanic zinc-plated SKU: 77010500](https://maedler.in/product/round-link-steel-chain-din-766a-quality-class-3-diameter-5-mm-glavanic-zinc-plated-sku-77010500/): Type 5 x 18,5 d [mm] 5 t [mm] 18,5 b [mm] 17 Working load [N] 3200 Min. Breaking Load [N] 12000 Weight [kg/m] 0,50 Notice ** CATALOG PRODUCT PAGE CAD FILES (download) - [Round-link steel chain DIN 766A quality class 3 diameter 4 mm glavanic zinc-plated SKU: 77010400](https://maedler.in/product/round-link-steel-chain-din-766a-quality-class-3-diameter-4-mm-glavanic-zinc-plated-sku-77010400/): Type 4 x 16 d [mm] 4 t [mm] 16,0 b [mm] 14 Working load [N] 2000 Min. Breaking Load [N] 8000 Weight [kg/m] 0,32 Notice ** CATALOG PRODUCT PAGE CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 19mm width 6mm sealed on both sides SKU: 698-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-sku-698-2rs-mae/): d [mm] 8 D [mm] 19 B [mm] 6 Type beidseitig abgedichtet Load Rating dyn. C [kN] 2,24 Load Rating stat. C0 [kN] 0,87 Maximum Speed [min 1] 36.000 Weight [g] 7,2 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 19mm width 6mm shielded on both sides SKU: 698-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-sku-698-zz-mae/): d [mm] 8 D [mm] 19 B [mm] 6 Type beidseitig Deckscheiben Load Rating dyn. C [kN] 2,24 Load Rating stat. C0 [kN] 0,87 Maximum Speed [min 1] 36.000 Weight [g] 7,2 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 15mm width 5mm sealed on both sides SKU: 696-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-15mm-width-5mm-sealed-on-both-sides-sku-696-2rs-mae/): d [mm] 6 D [mm] 15 B [mm] 5 Type beidseitig abgedichtet Load Rating dyn. C [kN] 1,37 Load Rating stat. C0 [kN] 0,50 Maximum Speed [min 1] 39.000 Weight [g] 3,9 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 15mm width 5mm shielded on both sides SKU: 696-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-15mm-width-5mm-shielded-on-both-sides-sku-696-zz-mae/): d [mm] 6 D [mm] 15 B [mm] 5 Type beidseitig Deckscheiben Load Rating dyn. C [kN] 1,37 Load Rating stat. C0 [kN] 0,50 Maximum Speed [min 1] 39.000 Weight [g] 3,9 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 16mm width 5mm sealed on both sides SKU: 688-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-16mm-width-5mm-sealed-on-both-sides-sku-688-2rs-mae/): d [mm] 8 D [mm] 16 B [mm] 5 Type beidseitig abgedichtet Load Rating dyn. C [kN] 1,27 Load Rating stat. C0 [kN] 0,53 Maximum Speed [min 1] 37.000 Weight [g] 3,2 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 16mm width 5mm shielded on both sides SKU: 688-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-16mm-width-5mm-shielded-on-both-sides-sku-688-zz-mae/): d [mm] 8 D [mm] 16 B [mm] 5 Type beidseitig Deckscheiben Load Rating dyn. C [kN] 1,27 Load Rating stat. C0 [kN] 0,53 Maximum Speed [min 1] 37.000 Weight [g] 3,2 CATALOG PRODUCT PAGE ADDITIONAL INFORMATION CAD FILES (download) - [Edge trim PVC/EPDM application range 1,0 - 4,0 mm total height 16mm total width 20.5mm SKU: 68716000](https://maedler.in/product/edge-trim-pvc-epdm-application-range-10-40-mm-total-height-16mm-total-width-20-5mm-sku-68716000/): Clamping Range [mm] 1,0 – 4,0 Colour schwarz Max. Length [m] 100 a [mm] 40 b [mm] 40 c [mm] 150 d [mm] 150 Weight [g/m] 170 CATALOG PRODUCT PAGE CAD FILES (download) - [Edge trim PVC/EPDM application range 1.0 - 4.0 mm total height 16.4mm total width 24.7mm SKU: 68715000](https://maedler.in/product/edge-trim-pvc-epdm-application-range-1-0-4-0-mm-total-height-16-4mm-total-width-24-7mm-sku-68715000/): Clamping Range [mm] 1,0 – 4,0 Colour schwarz Max. Length [m] 100 a [mm] 50 b [mm] 30 c [mm] 100 d [mm] 120 Weight [g/m] 180 CATALOG PRODUCT PAGE CAD FILES (download) - [Edge trim PVC/EPDM application range 1.0 - 4.0 mm total height 21mm total width 10.4mm SKU: 68714000](https://maedler.in/product/edge-trim-pvc-epdm-application-range-1-0-4-0-mm-total-height-21mm-total-width-10-4mm-sku-68714000/): Clamping Range [mm] 1,0 – 4,0 Colour schwarz Max. Length [m] 100 a [mm] 70 b [mm] 80 c [mm] 15 d [mm] 15 Weight [g/m] 175 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane timing belt T10 width 25mm Lw 1500mm 150 teeth 25 T10/1500 SKU: 16474400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1500mm-150-teeth-25-t10-1500-sku-16474400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1460mm 146 teeth 25 T10/1460 SKU: 16474300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1460mm-146-teeth-25-t10-1460-sku-16474300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1450mm 145 teeth 25 T10/1450 SKU: 16474200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1450mm-145-teeth-25-t10-1450-sku-16474200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1440mm 144 teeth 25 T10/1440 SKU: 16474100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1440mm-144-teeth-25-t10-1440-sku-16474100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1420mm 142 teeth 25 T10/1420 SKU: 16474000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1420mm-142-teeth-25-t10-1420-sku-16474000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1400mm 140 teeth 25 T10/1400 SKU: 16473900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1400mm-140-teeth-25-t10-1400-sku-16473900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1390mm 139 teeth 25 T10/1390 SKU: 16473800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1390mm-139-teeth-25-t10-1390-sku-16473800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1350mm 135 teeth 25 T10/1350 SKU: 16473700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1350mm-135-teeth-25-t10-1350-sku-16473700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1320mm 132 teeth 25 T10/1320 SKU: 16473600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1320mm-132-teeth-25-t10-1320-sku-16473600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1300mm 130 teeth 25 T10/1300 SKU: 16473500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1300mm-130-teeth-25-t10-1300-sku-16473500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1250mm 125 teeth 25 T10/1250 SKU: 16473400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1250mm-125-teeth-25-t10-1250-sku-16473400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1240mm 124 teeth 25 T10/1240 SKU: 16473300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1240mm-124-teeth-25-t10-1240-sku-16473300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1210mm 121 teeth 25 T10/1210 SKU: 16473200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1210mm-121-teeth-25-t10-1210-sku-16473200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1150mm 115 teeth 25 T10/1150 SKU: 16473100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1150mm-115-teeth-25-t10-1150-sku-16473100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1140mm 114 teeth 25 T10/1140 SKU: 16473000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1140mm-114-teeth-25-t10-1140-sku-16473000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1110mm 111 teeth 25 T10/1110 SKU: 16472900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1110mm-111-teeth-25-t10-1110-sku-16472900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1080mm 108 teeth 25 T10/1080 SKU: 16472800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1080mm-108-teeth-25-t10-1080-sku-16472800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1010mm 101 teeth 25 T10/1010 SKU: 16472700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1010mm-101-teeth-25-t10-1010-sku-16472700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 980mm 98 teeth 25 T10/980 SKU: 16472600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-980mm-98-teeth-25-t10-980-sku-16472600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 970mm 97 teeth 25 T10/970 SKU: 16472500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-970mm-97-teeth-25-t10-970-sku-16472500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 960mm 96 teeth 25 T10/960 SKU: 16472400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-960mm-96-teeth-25-t10-960-sku-16472400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 920mm 92 teeth 25 T10/920 SKU: 16472300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-920mm-92-teeth-25-t10-920-sku-16472300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 900mm 90 teeth 25 T10/900 SKU: 16472200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-900mm-90-teeth-25-t10-900-sku-16472200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 890mm 89 teeth 25 T10/890 SKU: 16472100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-890mm-89-teeth-25-t10-890-sku-16472100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 880mm 88 teeth 25 T10/880 SKU: 16472000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-880mm-88-teeth-25-t10-880-sku-16472000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 840mm 84 teeth 25 T10/840 SKU: 16471900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-840mm-84-teeth-25-t10-840-sku-16471900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 810mm 81 teeth 25 T10/810 SKU: 16471800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-810mm-81-teeth-25-t10-810-sku-16471800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 780mm 78 teeth 25 T10/780 SKU: 16471700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-780mm-78-teeth-25-t10-780-sku-16471700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 750mm 75 teeth 25 T10/750 SKU: 16471600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-750mm-75-teeth-25-t10-750-sku-16471600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 720mm 72 teeth 25 T10/720 SKU: 16471500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-720mm-72-teeth-25-t10-720-sku-16471500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 700mm 70 teeth 25 T10/700 SKU: 16471400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-700mm-70-teeth-25-t10-700-sku-16471400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 690mm 69 teeth 25 T10/690 SKU: 16471300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-690mm-69-teeth-25-t10-690-sku-16471300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 660mm 66 teeth 25 T10/660 SKU: 16471200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-660mm-66-teeth-25-t10-660-sku-16471200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 630mm 63 teeth 25 T10/630 SKU: 16471100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-630mm-63-teeth-25-t10-630-sku-16471100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 610mm 61 teeth 25 T10/610 SKU: 16471000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-610mm-61-teeth-25-t10-610-sku-16471000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 560mm 56 teeth 25 T10/560 SKU: 16470900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-560mm-56-teeth-25-t10-560-sku-16470900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 530mm 53 teeth 25 T10/530 SKU: 16470800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-530mm-53-teeth-25-t10-530-sku-16470800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 500mm 50 teeth 25 T10/500 SKU: 16470700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-500mm-50-teeth-25-t10-500-sku-16470700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 450mm 45 teeth 25 T10/450 SKU: 16470600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-450mm-45-teeth-25-t10-450-sku-16470600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 440mm 44 teeth 25 T10/440 SKU: 16470500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-440mm-44-teeth-25-t10-440-sku-16470500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 410mm 41 teeth 25 T10/410 SKU: 16470400](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-410mm-41-teeth-25-t10-410-sku-16470400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 400mm 40 teeth 25 T10/400 SKU: 16470300](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-400mm-40-teeth-25-t10-400-sku-16470300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 370mm 37 teeth 25 T10/370 SKU: 16470200](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-370mm-37-teeth-25-t10-370-sku-16470200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 260mm 26 teeth 25 T10/260 SKU: 16470100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-260mm-26-teeth-25-t10-260-sku-16470100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm 25T10 open length PAZ = Polyamide fabric on tooth side SKU: 16470001](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-25t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16470001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 25mm 25T10 open length SKU: 16470000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-25t10-open-length-sku-16470000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T10 belt width 16mm SKU: 16469900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-16mm-sku-16469900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T10 width 16mm Lw 2250mm 225 teeth 16 T10/2250 SKU: 16465100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-2250mm-225-teeth-16-t10-2250-sku-16465100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1960mm 196 teeth 16 T10/1960 SKU: 16465000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1960mm-196-teeth-16-t10-1960-sku-16465000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1880mm 188 teeth 16 T10/1880 SKU: 16464900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1880mm-188-teeth-16-t10-1880-sku-16464900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1780mm 178 teeth 16 T10/1780 SKU: 16464800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1780mm-178-teeth-16-t10-1780-sku-16464800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1750mm 175 teeth 16 T10/1750 SKU: 16464700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1750mm-175-teeth-16-t10-1750-sku-16464700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1610mm 161 teeth 16 T10/1610 SKU: 16464600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1610mm-161-teeth-16-t10-1610-sku-16464600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1560mm 156 teeth 16 T10/1560 SKU: 16464500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1560mm-156-teeth-16-t10-1560-sku-16464500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1500mm 150 teeth 16 T10/1500 SKU: 16464400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1500mm-150-teeth-16-t10-1500-sku-16464400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1460mm 146 teeth 16 T10/1460 SKU: 16464300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1460mm-146-teeth-16-t10-1460-sku-16464300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1450mm 145 teeth 16 T10/1450 SKU: 16464200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1450mm-145-teeth-16-t10-1450-sku-16464200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1440mm 144 teeth 16 T10/1440 SKU: 16464100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1440mm-144-teeth-16-t10-1440-sku-16464100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1420mm 142 teeth 16 T10/1420 SKU: 16464000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1420mm-142-teeth-16-t10-1420-sku-16464000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1400mm 140 teeth 16 T10/1400 SKU: 16463900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1400mm-140-teeth-16-t10-1400-sku-16463900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1390mm 139 teeth 16 T10/1390 SKU: 16463800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1390mm-139-teeth-16-t10-1390-sku-16463800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1350mm 135 teeth 16 T10/1350 SKU: 16463700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1350mm-135-teeth-16-t10-1350-sku-16463700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1320mm 132 teeth 16 T10/1320 SKU: 16463600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1320mm-132-teeth-16-t10-1320-sku-16463600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1300mm 130 teeth 16 T10/1300 SKU: 16463500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1300mm-130-teeth-16-t10-1300-sku-16463500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1250mm 125 teeth 16 T10/1250 SKU: 16463400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1250mm-125-teeth-16-t10-1250-sku-16463400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1240mm 124 teeth 16 T10/1240 SKU: 16463300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1240mm-124-teeth-16-t10-1240-sku-16463300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1210mm 121 teeth 16 T10/1210 SKU: 16463200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1210mm-121-teeth-16-t10-1210-sku-16463200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1150mm 115 teeth 16 T10/1150 SKU: 16463100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1150mm-115-teeth-16-t10-1150-sku-16463100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1140mm 114 teeth 16 T10/1140 SKU: 16463000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1140mm-114-teeth-16-t10-1140-sku-16463000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1110mm 111 teeth 16 T10/1110 SKU: 16462900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1110mm-111-teeth-16-t10-1110-sku-16462900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1080mm 108 teeth 16 T10/1080 SKU: 16462800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1080mm-108-teeth-16-t10-1080-sku-16462800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 1010mm 101 teeth 16 T10/1010 SKU: 16462700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-1010mm-101-teeth-16-t10-1010-sku-16462700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 980mm 98 teeth 16 T10/980 SKU: 16462600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-980mm-98-teeth-16-t10-980-sku-16462600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 970mm 97 teeth 16 T10/970 SKU: 16462500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-970mm-97-teeth-16-t10-970-sku-16462500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 960mm 96 teeth 16 T10/960 SKU: 16462400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-960mm-96-teeth-16-t10-960-sku-16462400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 920mm 92 teeth 16 T10/920 SKU: 16462300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-920mm-92-teeth-16-t10-920-sku-16462300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 900mm 90 teeth 16 T10/900 SKU: 16462200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-900mm-90-teeth-16-t10-900-sku-16462200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 890mm 89 teeth 16 T10/890 SKU: 16462100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-890mm-89-teeth-16-t10-890-sku-16462100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 880mm 88 teeth 16 T10/880 SKU: 16462000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-880mm-88-teeth-16-t10-880-sku-16462000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 840mm 84 teeth 16 T10/840 SKU: 16461900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-840mm-84-teeth-16-t10-840-sku-16461900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 810mm 81 teeth 16 T10/810 SKU: 16461800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-810mm-81-teeth-16-t10-810-sku-16461800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 780mm 78 teeth 16 T10/780 SKU: 16461700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-780mm-78-teeth-16-t10-780-sku-16461700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 750mm 75 teeth 16 T10/750 SKU: 16461600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-750mm-75-teeth-16-t10-750-sku-16461600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 720mm 72 teeth 16 T10/720 SKU: 16461500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-720mm-72-teeth-16-t10-720-sku-16461500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 700mm 70 teeth 16 T10/700 SKU: 16461400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-700mm-70-teeth-16-t10-700-sku-16461400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 690mm 69 teeth 16 T10/690 SKU: 16461300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-690mm-69-teeth-16-t10-690-sku-16461300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 660mm 66 teeth 16 T10/660 SKU: 16461200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-660mm-66-teeth-16-t10-660-sku-16461200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 630mm 63 teeth 16 T10/630 SKU: 16461100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-630mm-63-teeth-16-t10-630-sku-16461100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 610mm 61 teeth 16 T10/610 SKU: 16461000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-610mm-61-teeth-16-t10-610-sku-16461000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 560mm 56 teeth 16 T10/560 SKU: 16460900](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-560mm-56-teeth-16-t10-560-sku-16460900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 530mm 53 teeth 16 T10/530 SKU: 16460800](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-530mm-53-teeth-16-t10-530-sku-16460800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 500mm 50 teeth 16 T10/500 SKU: 16460700](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-500mm-50-teeth-16-t10-500-sku-16460700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 450mm 45 teeth 16 T10/450 SKU: 16460600](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-450mm-45-teeth-16-t10-450-sku-16460600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 440mm 44 teeth 16 T10/440 SKU: 16460500](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-440mm-44-teeth-16-t10-440-sku-16460500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 410mm 41 teeth 16 T10/410 SKU: 16460400](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-410mm-41-teeth-16-t10-410-sku-16460400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 400mm 40 teeth 16 T10/400 SKU: 16460300](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-400mm-40-teeth-16-t10-400-sku-16460300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 370mm 37 teeth 16 T10/370 SKU: 16460200](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-370mm-37-teeth-16-t10-370-sku-16460200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm Lw 260mm 26 teeth 16 T10/260 SKU: 16460100](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-lw-260mm-26-teeth-16-t10-260-sku-16460100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 16mm 16T10 open length PAZ = Polyamide fabric on tooth side SKU: 16460001](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-16t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16460001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 16mm 16 T10 open length SKU: 16460000](https://maedler.in/product/polyurethane-timing-belt-t10-width-16mm-16-t10-open-length-sku-16460000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Hollow bolt with sealing rings thread G1/8A SKU: 86470018](https://maedler.in/product/hollow-bolt-with-sealing-rings-thread-g1-8a-sku-86470018/): B G1/8 A D1 [mm] 30,0 SW [mm] 14 Ø S [mm] 5,0 Weight [g] 16 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 10mm, thread G1/4A SKU: 86361028](https://maedler.in/product/swivel-elbow-adaptor-with-none-return-valve-to-be-used-on-the-exhaust-side-with-sealing-ring-tube-outer-diameter-10mm-thread-g1-4a-sku-86361028/): Ø A [mm] 10 B G1/4 A D [mm] 30,2 D1 [mm] 36,5 SW [mm] 17 Ø F [mm] 15,7 G [mm] 6,0 Weight [g] 63 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 8mm, thread G3/8A SKU: 86360838](https://maedler.in/product/swivel-elbow-adaptor-with-none-return-valve-to-be-used-on-the-exhaust-side-with-sealing-ring-tube-outer-diameter-8mm-thread-g3-8a-sku-86360838/): Ø A [mm] 8 B G3/8 A D [mm] 26,7 D1 [mm] 51,5 SW [mm] 22 Ø F [mm] 16,5 G [mm] 10,0 Weight [g] 123 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 8mm, thread G1/4A SKU: 86360828](https://maedler.in/product/swivel-elbow-adaptor-with-none-return-valve-to-be-used-on-the-exhaust-side-with-sealing-ring-tube-outer-diameter-8mm-thread-g1-4a-sku-86360828/): Ø A [mm] 8 B G1/4 A D [mm] 24,7 D1 [mm] 36,5 SW [mm] 17 Ø F [mm] 14,0 G [mm] 6,0 Weight [g] 59 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 8mm, thread G1/8A SKU: 86360818](https://maedler.in/product/swivel-elbow-adaptor-with-none-return-valve-to-be-used-on-the-exhaust-side-with-sealing-ring-tube-outer-diameter-8mm-thread-g1-8a-sku-86360818/): Ø A [mm] 8 B G1/8 A D [mm] 23,7 D1 [mm] 34,0 SW [mm] 14 Ø F [mm] 13,5 G [mm] 6,0 Weight [g] 39 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 6mm, thread G1/4A SKU: 86360628](https://maedler.in/product/swivel-elbow-adaptor-with-none-return-valve-to-be-used-on-the-exhaust-side-with-sealing-ring-tube-outer-diameter-6mm-thread-g1-4a-sku-86360628/): Ø A [mm] 6 B G1/4 A D [mm] 24,2 D1 [mm] 36,5 SW [mm] 17 Ø F [mm] 13,0 G [mm] 6,0 Weight [g] 58 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 6mm, thread G1/8A SKU: 86360618](https://maedler.in/product/swivel-elbow-adaptor-with-none-return-valve-to-be-used-on-the-exhaust-side-with-sealing-ring-tube-outer-diameter-6mm-thread-g1-8a-sku-86360618/): Ø A [mm] 6 B G1/8 A D [mm] 23,7 D1 [mm] 34,0 SW [mm] 14 Ø F [mm] 12,5 G [mm] 6,0 Weight [g] 37 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 6mm, thread M5 SKU: 86360605](https://maedler.in/product/swivel-elbow-adaptor-with-none-return-valve-to-be-used-on-the-exhaust-side-with-sealing-ring-tube-outer-diameter-6mm-thread-m5-sku-86360605/): Ø A [mm] 6 B M5 D [mm] 22,2 D1 [mm] 27,0 SW [mm] 8 Ø F [mm] 12,5 G [mm] 4,4 Weight [g] 17 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 4mm, thread G1/8A SKU: 86360418](https://maedler.in/product/swivel-elbow-adaptor-with-none-return-valve-to-be-used-on-the-exhaust-side-with-sealing-ring-tube-outer-diameter-4mm-thread-g1-8a-sku-86360418/): Ø A [mm] 4 B G1/8 A D [mm] 20,6 D1 [mm] 34,0 SW [mm] 14 Ø F [mm] 11,0 G [mm] 6,0 Weight [g] 34 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 4mm, thread M5 SKU: 86360405](https://maedler.in/product/swivel-elbow-adaptor-with-none-return-valve-to-be-used-on-the-exhaust-side-with-sealing-ring-tube-outer-diameter-4mm-thread-m5-sku-86360405/): Ø A [mm] 4 B M5 D [mm] 18,7 D1 [mm] 27,0 SW [mm] 8 Ø F [mm] 9,5 G [mm] 4,4 Weight [g] 13 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with sealing ring tube outer diameter 10mm, thread G1/4A SKU: 86351028](https://maedler.in/product/swivel-elbow-adaptor-with-sealing-ring-tube-outer-diameter-10mm-thread-g1-4a-sku-86351028/): Ø A [mm] 10 B G1/4 A D [mm] 30,2 D1 [mm] 34 SW [mm] 17 Ø F [mm] 16,0 G [mm] 7,4 Weight [g] 59 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with sealing ring tube outer diameter 8mm, thread G3/8A SKU: 86350838](https://maedler.in/product/swivel-elbow-adaptor-with-sealing-ring-tube-outer-diameter-8mm-thread-g3-8a-sku-86350838/): Ø A [mm] 8 B G3/8 A D [mm] 26,7 D1 [mm] 41 SW [mm] 22 Ø F [mm] 16,5 G [mm] 9,0 Weight [g] 112 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with sealing ring tube outer diameter 8mm, thread G1/4A SKU: 86350828](https://maedler.in/product/swivel-elbow-adaptor-with-sealing-ring-tube-outer-diameter-8mm-thread-g1-4a-sku-86350828/): Ø A [mm] 8 B G1/4 A D [mm] 24,7 D1 [mm] 34 SW [mm] 17 Ø F [mm] 14,0 G [mm] 7,4 Weight [g] 56 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with sealing ring tube outer diameter 8mm, thread G1/8A SKU: 86350818](https://maedler.in/product/swivel-elbow-adaptor-with-sealing-ring-tube-outer-diameter-8mm-thread-g1-8a-sku-86350818/): Ø A [mm] 8 B G1/8 A D [mm] 23,7 D1 [mm] 30 SW [mm] 14 Ø F [mm] 14,0 G [mm] 6,0 Weight [g] 38 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with sealing ring tube outer diameter 6mm, thread G1/4A SKU: 86350628](https://maedler.in/product/swivel-elbow-adaptor-with-sealing-ring-tube-outer-diameter-6mm-thread-g1-4a-sku-86350628/): Ø A [mm] 6 B G1/4 A D [mm] 24,2 D1 [mm] 34 SW [mm] 17 Ø F [mm] 13,0 G [mm] 7,4 Weight [g] 54 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with sealing ring tube outer diameter 6mm, thread M5 SKU: 86350605](https://maedler.in/product/swivel-elbow-adaptor-with-sealing-ring-tube-outer-diameter-6mm-thread-m5-sku-86350605/): Ø A [mm] 6 B M5 D [mm] 22,2 D1 [mm] 22 SW [mm] 8 Ø F [mm] 12,5 G [mm] 4,0 Weight [g] 17 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with sealing ring tube outer diameter 4mm, thread G1/8A SKU: 86350418](https://maedler.in/product/swivel-elbow-adaptor-with-sealing-ring-tube-outer-diameter-4mm-thread-g1-8a-sku-86350418/): Ø A [mm] 4 B G1/8 A D [mm] 20,6 D1 [mm] 30 SW [mm] 14 Ø F [mm] 11,0 G [mm] 6,0 Weight [g] 34 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor with sealing ring tube outer diameter 4mm, thread M5 SKU: 86350405](https://maedler.in/product/swivel-elbow-adaptor-with-sealing-ring-tube-outer-diameter-4mm-thread-m5-sku-86350405/): Ø A [mm] 4 B M5 D [mm] 18,7 D1 [mm] 22 SW [mm] 8 Ø F [mm] 9,5 G [mm] 4,0 Weight [g] 137 CATALOG PRODUCT PAGE CAD FILES (download) - [Y-push-in connector tube outer diameter 10mm, tube outer diameter 8mm SKU: 86301008](https://maedler.in/product/y-push-in-connector-tube-outer-diameter-10mm-tube-outer-diameter-8mm-sku-86301008/): Material Hauptteil Messing Ø A [mm] 10 Ø A1 [mm] 8 B [mm] 16 C [mm] 52 E [mm] 16 F [mm] 32 H [mm] – Weight [g] 66 CATALOG PRODUCT PAGE CAD FILES (download) - [Y-push-in connector tube outer diameter 10mm, tube outer diameter 10mm SKU: 86301000](https://maedler.in/product/y-push-in-connector-tube-outer-diameter-10mm-tube-outer-diameter-10mm-sku-86301000/): Material Hauptteil Messing Ø A [mm] 10 Ø A1 [mm] 10 B [mm] 16 C [mm] 53,6 E [mm] 16 F [mm] 32 H [mm] – Weight [g] 50 CATALOG PRODUCT PAGE CAD FILES (download) - [Y-push-in connector tube outer diameter 8mm, tube outer diameter 6mm SKU: 86300806](https://maedler.in/product/y-push-in-connector-tube-outer-diameter-8mm-tube-outer-diameter-6mm-sku-86300806/): Ø A [mm] 8 Material Hauptteil Messing Ø A1 [mm] 6 B [mm] 14 C [mm] 43 E [mm] 14,5 F [mm] 28,5 H [mm] – Weight [g] 37 CATALOG PRODUCT PAGE CAD FILES (download) - [Y-push-in connector tube outer diameter 8mm, tube outer diameter 8mm SKU: 86300800](https://maedler.in/product/y-push-in-connector-tube-outer-diameter-8mm-tube-outer-diameter-8mm-sku-86300800/): Ø A [mm] 8 Material Hauptteil Messing Ø A1 [mm] 8 B [mm] 14 C [mm] 44 E [mm] 14,5 F [mm] 28,5 H [mm] – Weight [g] 63 CATALOG PRODUCT PAGE CAD FILES (download) - [Y-push-in connector tube outer diameter 6mm, tube outer diameter 4mm SKU: 86300604](https://maedler.in/product/y-push-in-connector-tube-outer-diameter-6mm-tube-outer-diameter-4mm-sku-86300604/): Material Hauptteil Messing Ø A [mm] 6 Ø A1 [mm] 4 B [mm] 12 C [mm] 37 E [mm] 11 F [mm] 24,5 H [mm] – Weight [g] 42 CATALOG PRODUCT PAGE CAD FILES (download) - [Y-push-in connector tube outer diameter 6mm, tube outer diameter 6mm SKU: 86300600](https://maedler.in/product/y-push-in-connector-tube-outer-diameter-6mm-tube-outer-diameter-6mm-sku-86300600/): Ø A [mm] 6 Material Hauptteil Messing Ø A1 [mm] 6 B [mm] 12 C [mm] 39 E [mm] 12,5 F [mm] 24,5 H [mm] – Weight [g] 30 CATALOG PRODUCT PAGE CAD FILES (download) - [Y-push-in connector tube outer diameter 4mm, tube outer diameter 4mm SKU: 86300400](https://maedler.in/product/y-push-in-connector-tube-outer-diameter-4mm-tube-outer-diameter-4mm-sku-86300400/): Material Hauptteil Messing Ø A [mm] 4 Ø A1 [mm] 4 B [mm] 9 C [mm] 33 E [mm] 9 F [mm] 18 H [mm] – Weight [g] 19 CATALOG PRODUCT PAGE CAD FILES (download) - [Tee connector tube outer diameter 12mm SKU: 86261200](https://maedler.in/product/tee-connector-tube-outer-diameter-12mm-sku-86261200/): Ø A [mm] 12 C [mm] 63,4 D [mm] 16,0 E [mm] 31,7 Ø F [mm] 20,6 Weight [g] 106 CATALOG PRODUCT PAGE CAD FILES (download) - [Tee connector tube outer diameter 10mm SKU: 86261000](https://maedler.in/product/tee-connector-tube-outer-diameter-10mm-sku-86261000/): Ø A [mm] 10 C [mm] 53,4 D [mm] 13,3 E [mm] 26,7 Ø F [mm] 17,1 Weight [g] 75 CATALOG PRODUCT PAGE CAD FILES (download) - [Tee connector tube outer diameter 8mm SKU: 86260800](https://maedler.in/product/tee-connector-tube-outer-diameter-8mm-sku-86260800/): Ø A [mm] 8 C [mm] 42,6 D [mm] 11,0 E [mm] 21,3 Ø F [mm] 14,3 Weight [g] 39 CATALOG PRODUCT PAGE CAD FILES (download) - [Tee connector tube outer diameter 6mm SKU: 86260600](https://maedler.in/product/tee-connector-tube-outer-diameter-6mm-sku-86260600/): Ø A [mm] 6 C [mm] 39,2 D [mm] 8,0 E [mm] 19,6 Ø F [mm] 12,1 Weight [g] 27 CATALOG PRODUCT PAGE CAD FILES (download) - [Tee connector tube outer diameter 4mm SKU: 86260400](https://maedler.in/product/tee-connector-tube-outer-diameter-4mm-sku-86260400/): Ø A [mm] 4 C [mm] 33,8 D [mm] 7,0 E [mm] 16,9 Ø F [mm] 10,1 Weight [g] 16 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow push-in connector tube outer diameter 8mm, pin outer diameter 8mm SKU: 86230800](https://maedler.in/product/elbow-push-in-connector-tube-outer-diameter-8mm-pin-outer-diameter-8mm-sku-86230800/): Ø A [mm] 8 Ø A1 [mm] 8 Ø C [mm] 14 D [mm] – E [mm] 21,2 F [mm] 29,5 Weight [g] 30 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow push-in connector tube outer diameter 6mm, pin outer diameter 6mm SKU: 86230600](https://maedler.in/product/elbow-push-in-connector-tube-outer-diameter-6mm-pin-outer-diameter-6mm-sku-86230600/): Ø A [mm] 6 Ø A1 [mm] 6 Ø C [mm] 12 D [mm] 9 E [mm] 18,9 F [mm] 27,5 Weight [g] 15 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow push-in connector tube outer diameter 4mm, pin outer diameter 4mm SKU: 86230400](https://maedler.in/product/elbow-push-in-connector-tube-outer-diameter-4mm-pin-outer-diameter-4mm-sku-86230400/): Ø A [mm] 4 Ø A1 [mm] 4 Ø C [mm] 10 D [mm] 7 E [mm] 9,4 F [mm] 25,0 Weight [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow bulkhead connector tube outer diameter 10mm SKU: 86221000](https://maedler.in/product/swivel-elbow-bulkhead-connector-tube-outer-diameter-10mm-sku-86221000/): Ø A [mm] 10 B [mm] 49,2 SW [mm] 27 D [mm] 31,7 E M22x1,5 F [mm] 9 G [mm] 31,0 Weight [g] 165 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow bulkhead connector tube outer diameter 8mm SKU: 86220800](https://maedler.in/product/swivel-elbow-bulkhead-connector-tube-outer-diameter-8mm-sku-86220800/): Ø A [mm] 8 B [mm] 45,2 SW [mm] 22 D [mm] 26,7 E M16x1,5 F [mm] 7 G [mm] 30,0 Weight [g] 124 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow bulkhead connector tube outer diameter 6mm SKU: 86220600](https://maedler.in/product/swivel-elbow-bulkhead-connector-tube-outer-diameter-6mm-sku-86220600/): Ø A [mm] 6 B [mm] 40,0 SW [mm] 19 D [mm] 24,2 E M14x1,5 F [mm] 7 G [mm] 24,5 Weight [g] 76 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow adaptor tube outer diameter 12mm SKU: 86211200](https://maedler.in/product/elbow-adaptor-tube-outer-diameter-12mm-sku-86211200/): Ø A [mm] 12 Ø C [mm] 20,6 D [mm] 16,0 E [mm] 31,7 Weight [g] 82 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow adaptor tube outer diameter 10mm SKU: 86211000](https://maedler.in/product/elbow-adaptor-tube-outer-diameter-10mm-sku-86211000/): Ø A [mm] 10 Ø C [mm] 17,1 D [mm] 13,3 E [mm] 26,7 Weight [g] 48 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow adaptor tube outer diameter 8mm SKU: 86210800](https://maedler.in/product/elbow-adaptor-tube-outer-diameter-8mm-sku-86210800/): Ø A [mm] 8 Ø C [mm] 14,3 D [mm] 11,0 E [mm] 21,3 Weight [g] 31 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow adaptor tube outer diameter 6mm SKU: 86210600](https://maedler.in/product/elbow-adaptor-tube-outer-diameter-6mm-sku-86210600/): Ø A [mm] 6 Ø C [mm] 12,1 D [mm] 8,0 E [mm] 19,6 Weight [g] 23 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow adaptor tube outer diameter 4mm SKU: 86210400](https://maedler.in/product/elbow-adaptor-tube-outer-diameter-4mm-sku-86210400/): Ø A [mm] 4 Ø C [mm] 10,1 D [mm] 7,0 E [mm] 17,0 Weight [g] 13 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 45° with o-ring tube outer diameter 8mm, thread G1/4A SKU: 86200828](https://maedler.in/product/swivel-elbow-screw-in-connector-45-with-o-ring-tube-outer-diameter-8mm-thread-g1-4a-sku-86200828/): Ø A [mm] 8 B [mm] G1/4A SW [mm] 17 E [mm] 25,9 F [mm] 19,5 G [mm] 7,5 Ø J [mm] 17,8 Weight [g] 45 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 45° with o-ring tube outer diameter 8mm, thread G1/8A SKU: 86200818](https://maedler.in/product/swivel-elbow-screw-in-connector-45-with-o-ring-tube-outer-diameter-8mm-thread-g1-8a-sku-86200818/): Ø A [mm] 8 B [mm] G1/8A SW [mm] 11 E [mm] 20,6 F [mm] 19,5 G [mm] 4,9 Ø J [mm] 13,8 Weight [g] 34 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 45° with o-ring tube outer diameter 6mm, thread G1/4A SKU: 86200628](https://maedler.in/product/swivel-elbow-screw-in-connector-45-with-o-ring-tube-outer-diameter-6mm-thread-g1-4a-sku-86200628/): Ø A [mm] 6 B [mm] G1/4A SW [mm] 11 E [mm] 23,0 F [mm] 17,7 G [mm] 7,5 Ø J [mm] 17,8 Weight [g] 45 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 45° with o-ring tube outer diameter 6mm, thread G1/8A SKU: 86200618](https://maedler.in/product/swivel-elbow-screw-in-connector-45-with-o-ring-tube-outer-diameter-6mm-thread-g1-8a-sku-86200618/): Ø A [mm] 6 B [mm] G1/8A SW [mm] 11 E [mm] 19,3 F [mm] 17,7 G [mm] 4,9 Ø J [mm] 13,8 Weight [g] 26 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 12mm, thread G1/2A SKU: 86171248](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-12mm-thread-g1-2a-sku-86171248/): Ø A [mm] 12 B G1/2 A SW [mm] 19 D [mm] 16,0 E [mm] 43,0 F [mm] 31,7 G [mm] 12,2 Ø J [mm] 25,8 Weight [g] 125 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 12mm, thread G1/4A SKU: 86171228](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-12mm-thread-g1-4a-sku-86171228/): Ø A [mm] 12 B G1/4 A SW [mm] 19 D [mm] 16,0 E [mm] 35,3 F [mm] 31,7 G [mm] 7,5 Ø J [mm] 17,8 Weight [g] 103 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 10mm, thread G1/2A SKU: 86171048](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-10mm-thread-g1-2a-sku-86171048/): Ø A [mm] 10 B G1/2 A SW [mm] 19 D [mm] 13,3 E [mm] 39,3 F [mm] 26,7 G [mm] 12,2 Ø J [mm] 25,8 Weight [g] 96 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 10mm, thread G3/8A SKU: 86171038](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-10mm-thread-g3-8a-sku-86171038/): Ø A [mm] 10 B G3/8 A SW [mm] 19 D [mm] 13,3 E [mm] 33,3 F [mm] 26,7 G [mm] 8,9 Ø J [mm] 21,8 Weight [g] 74 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 10mm, thread G1/4A SKU: 86171028](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-10mm-thread-g1-4a-sku-86171028/): Ø A [mm] 10 B G1/4 A SW [mm] 17 D [mm] 13,3 E [mm] 31,6 F [mm] 26,7 G [mm] 7,5 Ø J [mm] 17,8 Weight [g] 66 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 8mm, thread G1/4A SKU: 86170828](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-8mm-thread-g1-4a-sku-86170828/): Ø A [mm] 8 B G1/4 A SW [mm] 17 D [mm] 11,0 E [mm] 29,1 F [mm] 21,3 G [mm] 7,5 Ø J [mm] 17,8 Weight [g] 48 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 8mm, thread G1/8A SKU: 86170818](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-8mm-thread-g1-8a-sku-86170818/): Ø A [mm] 8 B G1/8 A SW [mm] 13 D [mm] 11,0 E [mm] 23,8 F [mm] 21,3 G [mm] 4,9 Ø J [mm] 13,8 Weight [g] 32 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 6mm, thread G1/4A SKU: 86170628](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-6mm-thread-g1-4a-sku-86170628/): Ø A [mm] 6 B G1/4 A SW [mm] 11 D [mm] 9,0 E [mm] 26,5 F [mm] 19,6 G [mm] 7,5 Ø J [mm] 17,8 Weight [g] 30 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 6mm, thread G1/8A SKU: 86170618](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-6mm-thread-g1-8a-sku-86170618/): Ø A [mm] 6 B G1/8 A SW [mm] 11 D [mm] 9,0 E [mm] 22,8 F [mm] 19,6 G [mm] 4,9 Ø J [mm] 13,8 Weight [g] 23 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with sealing ring tube outer diameter 6mm, thread M5 SKU: 86170605](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-sealing-ring-tube-outer-diameter-6mm-thread-m5-sku-86170605/): Ø A [mm] 6 B M5 SW [mm] 8 D [mm] 9,0 E [mm] 20,5 F [mm] 19,6 G [mm] 3,4 Ø J [mm] 8,0 Weight [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 4mm, thread G1/4A SKU: 86170428](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-4mm-thread-g1-4a-sku-86170428/): Ø A [mm] 4 B G1/4 A SW [mm] 11 D [mm] 7,0 E [mm] 25,5 F [mm] 16,9 G [mm] 7,5 Ø J [mm] 17,8 Weight [g] 27 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with o-ring tube outer diameter 4mm, thread G1/8A SKU: 86170418](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-o-ring-tube-outer-diameter-4mm-thread-g1-8a-sku-86170418/): Ø A [mm] 4 B G1/8 A SW [mm] 11 D [mm] 7,0 E [mm] 21,8 F [mm] 16,9 G [mm] 4,9 Ø J [mm] 13,8 Weight [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow screw-in connector 90° with sealing ring tube outer diameter 4mm, thread M5 SKU: 86170405](https://maedler.in/product/swivel-elbow-screw-in-connector-90-with-sealing-ring-tube-outer-diameter-4mm-thread-m5-sku-86170405/): Ø A [mm] 4 B M5 SW [mm] 8 D [mm] 7,0 E [mm] 19,0 F [mm] 17,0 G [mm] 3,4 Ø J [mm] 8,0 Weight [g] 39 CATALOG PRODUCT PAGE CAD FILES (download) - [Push-in silencer pin outer diameter 8mm SKU: 86140800](https://maedler.in/product/push-in-silencer-pin-outer-diameter-8mm-sku-86140800/): Ø A [mm] 8 B [mm] 40,5 Ø C [mm] 13,0 D [mm] 19,5 Weight [g] 14 CATALOG PRODUCT PAGE CAD FILES (download) - [Push-in silencer pin outer diameter 6mm SKU: 86140600](https://maedler.in/product/push-in-silencer-pin-outer-diameter-6mm-sku-86140600/): Ø A [mm] 6 B [mm] 33,5 Ø C [mm] 11,0 D [mm] 18,5 Weight [g] 8 CATALOG PRODUCT PAGE CAD FILES (download) - [Push-in silencer pin outer diameter 4mm SKU: 86140400](https://maedler.in/product/push-in-silencer-pin-outer-diameter-4mm-sku-86140400/): Ø A [mm] 4 B [mm] 31,5 Ø C [mm] 11,0 D [mm] 16,6 Weight [g] 6 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug pin outer diameter 12mm SKU: 86111200](https://maedler.in/product/plug-pin-outer-diameter-12mm-sku-86111200/): Ø A [mm] 12 B [mm] 16,7 C [mm] 37,5 Weight [g] 4 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug pin outer diameter 10mm SKU: 86111000](https://maedler.in/product/plug-pin-outer-diameter-10mm-sku-86111000/): Ø A [mm] 10 B [mm] 15,6 C [mm] 34,0 Weight [g] 3 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug pin outer diameter 8mm SKU: 86110800](https://maedler.in/product/plug-pin-outer-diameter-8mm-sku-86110800/): Ø A [mm] 8 B [mm] 12,7 C [mm] 29,5 Weight [g] 2 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug pin outer diameter 6mm SKU: 86110600](https://maedler.in/product/plug-pin-outer-diameter-6mm-sku-86110600/): Ø A [mm] 6 B [mm] 11,6 C [mm] 28,5 Weight [g] 1 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug pin outer diameter 4mm SKU: 86110400](https://maedler.in/product/plug-pin-outer-diameter-4mm-sku-86110400/): Ø A [mm] 4 B [mm] 9,6 C [mm] 26,5 Weight [g] 1 CATALOG PRODUCT PAGE CAD FILES (download) - [Reducer connector pin outer diameter 10mm, tube outer diameter 8mm SKU: 86091008](https://maedler.in/product/reducer-connector-pin-outer-diameter-10mm-tube-outer-diameter-8mm-sku-86091008/): Ø A [mm] 8 Ø A1 [mm] 10 B [mm] 38,2 Ø C [mm] 14,0 Weight [g] 15 CATALOG PRODUCT PAGE CAD FILES (download) - [Reducer connector pin outer diameter 10mm, tube outer diameter 6mm SKU: 86091006](https://maedler.in/product/reducer-connector-pin-outer-diameter-10mm-tube-outer-diameter-6mm-sku-86091006/): Ø A [mm] 6 Ø A1 [mm] 10 B [mm] 37,7 Ø C [mm] 12,0 Weight [g] 14 CATALOG PRODUCT PAGE CAD FILES (download) - [Reducer connector pin outer diameter 8mm, tube outer diameter 6mm SKU: 86090806](https://maedler.in/product/reducer-connector-pin-outer-diameter-8mm-tube-outer-diameter-6mm-sku-86090806/): Ø A [mm] 6 Ø A1 [mm] 8 B [mm] 36,7 Ø C [mm] 12,0 Weight [g] 15 CATALOG PRODUCT PAGE CAD FILES (download) - [Reducer connector pin outer diameter 8mm, tube outer diameter 4mm SKU: 86090804](https://maedler.in/product/reducer-connector-pin-outer-diameter-8mm-tube-outer-diameter-4mm-sku-86090804/): Ø A [mm] 4 Ø A1 [mm] 8 B [mm] 30,9 Ø C [mm] 10,0 Weight [g] 8 CATALOG PRODUCT PAGE CAD FILES (download) - [Extender connector pin outer diameter 6mm, tube outer diameter 8mm SKU: 86090608](https://maedler.in/product/extender-connector-pin-outer-diameter-6mm-tube-outer-diameter-8mm-sku-86090608/): Ø A [mm] 8 Ø A1 [mm] 6 B [mm] 37,5 Ø C [mm] 14,0 Weight [g] 2 CATALOG PRODUCT PAGE CAD FILES (download) - [Reducer connector pin outer diameter 6mm, tube outer diameter 4mm SKU: 86090604](https://maedler.in/product/reducer-connector-pin-outer-diameter-6mm-tube-outer-diameter-4mm-sku-86090604/): Ø A [mm] 4 Ø A1 [mm] 6 B [mm] 33,9 Ø C [mm] 10,0 Weight [g] 8 CATALOG PRODUCT PAGE CAD FILES (download) - [Extender connector pin outer diameter 4mm, tube outer diameter 6mm SKU: 86090406](https://maedler.in/product/extender-connector-pin-outer-diameter-4mm-tube-outer-diameter-6mm-sku-86090406/): Ø A [mm] 6 Ø A1 [mm] 4 B [mm] 35,2 Ø C [mm] 12,0 Weight [g] 2 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight connector tube outer diameter 12mm SKU: 86061200](https://maedler.in/product/straight-connector-tube-outer-diameter-12mm-sku-86061200/): Ø A [mm] 12 B [mm] 51,4 Ø C [mm] 20,5 Weight [g] 62 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight connector tube outer diameter 10mm SKU: 86061000](https://maedler.in/product/straight-connector-tube-outer-diameter-10mm-sku-86061000/): Ø A [mm] 10 B [mm] 44,4 Ø C [mm] 17,0 Weight [g] 37 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight connector tube outer diameter 8mm SKU: 86060800](https://maedler.in/product/straight-connector-tube-outer-diameter-8mm-sku-86060800/): Ø A [mm] 8 B [mm] 35,4 Ø C [mm] 14,0 Weight [g] 23 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight connector tube outer diameter 6mm SKU: 86060600](https://maedler.in/product/straight-connector-tube-outer-diameter-6mm-sku-86060600/): Ø A [mm] 6 B [mm] 33,4 Ø C [mm] 12,0 Weight [g] 17 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight connector tube outer diameter 4mm SKU: 86060400](https://maedler.in/product/straight-connector-tube-outer-diameter-4mm-sku-86060400/): Ø A [mm] 4 B [mm] 29,8 Ø C [mm] 10,0 Weight [g] 9 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight screw-on connector thread G3/8 tube outer diameter 10mm SKU: 86031038](https://maedler.in/product/straight-screw-on-connector-thread-g3-8-tube-outer-diameter-10mm-sku-86031038/): Ø A [mm] 10 B [mm] G3/8 C [mm] 39,2 SW [mm] 19 Weight [g] 41 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight screw-on connector thread G1/4 tube outer diameter 10mm SKU: 86031028](https://maedler.in/product/straight-screw-on-connector-thread-g1-4-tube-outer-diameter-10mm-sku-86031028/): Ø A [mm] 10 B [mm] G1/4 C [mm] 36,7 SW [mm] 17 Weight [g] 39 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight screw-on connector thread G1/4 tube outer diameter 8mm SKU: 86030828](https://maedler.in/product/straight-screw-on-connector-thread-g1-4-tube-outer-diameter-8mm-sku-86030828/): Ø A [mm] 8 B [mm] G1/4 C [mm] 31,7 SW [mm] 17 Weight [g] 29 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight screw-on connector thread G1/8 tube outer diameter 8mm SKU: 86030818](https://maedler.in/product/straight-screw-on-connector-thread-g1-8-tube-outer-diameter-8mm-sku-86030818/): Ø A [mm] 8 B [mm] G1/8 C [mm] 27,2 SW [mm] 13 Weight [g] 17 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight screw-on connector thread G1/4 tube outer diameter 6mm SKU: 86030628](https://maedler.in/product/straight-screw-on-connector-thread-g1-4-tube-outer-diameter-6mm-sku-86030628/): Ø A [mm] 6 B [mm] G1/4 C [mm] 30,7 SW [mm] 17 Weight [g] 29 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight screw-on connector thread G1/8 tube outer diameter 6mm SKU: 86030618](https://maedler.in/product/straight-screw-on-connector-thread-g1-8-tube-outer-diameter-6mm-sku-86030618/): Ø A [mm] 6 B [mm] G1/8 C [mm] 26,2 SW [mm] 13 Weight [g] 17 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight screw-on connector thread G1/4 tube outer diameter 4mm SKU: 86030428](https://maedler.in/product/straight-screw-on-connector-thread-g1-4-tube-outer-diameter-4mm-sku-86030428/): Ø A [mm] 4 B [mm] G1/4 C [mm] 28,9 SW [mm] 17 Weight [g] 24 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight screw-on connector thread G1/8 tube outer diameter 4mm SKU: 86030418](https://maedler.in/product/straight-screw-on-connector-thread-g1-8-tube-outer-diameter-4mm-sku-86030418/): Ø A [mm] 4 B [mm] G1/8 C [mm] 24,5 SW [mm] 13 Weight [g] 14 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/2A tube outer diameter 12mm SKU: 86011248](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-2a-tube-outer-diameter-12mm-sku-86011248/): Ø A [mm] 12 B [mm] G1/2A C [mm] 24,5 SW [mm] 22 E [mm] 9,0 Ø F [mm] – G [mm] 8 Weight [g] 37 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G3/8A tube outer diameter 12mm SKU: 86011238](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g3-8a-tube-outer-diameter-12mm-sku-86011238/): Ø A [mm] 12 B [mm] G3/8A C [mm] 24 SW [mm] 19 E [mm] 9,0 Ø F [mm] – G [mm] 7 Weight [g] 24 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/4A tube outer diameter 12mm SKU: 86011228](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-4a-tube-outer-diameter-12mm-sku-86011228/): Ø A [mm] 12 B [mm] G1/4A C [mm] 29,5 SW [mm] 19 E [mm] 7,0 Ø F [mm] – G [mm] 7 Weight [g] 29 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/2A tube outer diameter 10mm SKU: 86011048](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-2a-tube-outer-diameter-10mm-sku-86011048/): Ø A [mm] 10 B [mm] G1/2A C [mm] 25 SW [mm] 22 E [mm] 8,0 Ø F [mm] – G [mm] 8 Weight [g] 39 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G3/8A tube outer diameter 10mm SKU: 86011038](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g3-8a-tube-outer-diameter-10mm-sku-86011038/): Ø A [mm] 10 B [mm] G3/8A C [mm] 24,5 SW [mm] 19 E [mm] 8,0 Ø F [mm] – G [mm] 7 Weight [g] 27 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/4A tube outer diameter 10mm SKU: 86011028](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-4a-tube-outer-diameter-10mm-sku-86011028/): Ø A [mm] 10 B [mm] G1/4A C [mm] 30 SW [mm] 17 E [mm] 7,0 Ø F [mm] – G [mm] 7 Weight [g] 26 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/8A tube outer diameter10mm SKU: 86011018](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-8a-tube-outer-diameter10mm-sku-86011018/): Ø A [mm] 10 B [mm] G1/8A C [mm] 30 SW [mm] 17 E [mm] 5,0 Ø F [mm] – G [mm] 7 Weight [g] 26 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/2A tube outer diameter 8mm SKU: 86010848](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-2a-tube-outer-diameter-8mm-sku-86010848/): Ø A [mm] 8 B [mm] G1/2A C [mm] 24 SW [mm] 22 E [mm] 8,0 Ø F [mm] – G [mm] 8 Weight [g] 39 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G3/8A tube outer diameter 8mm SKU: 86010838](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g3-8a-tube-outer-diameter-8mm-sku-86010838/): Ø A [mm] 8 B [mm] G3/8A C [mm] 23 SW [mm] 19 E [mm] 6,0 Ø F [mm] – G [mm] 7 Weight [g] 27 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/4A tube outer diameter 8mm SKU: 86010828](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-4a-tube-outer-diameter-8mm-sku-86010828/): Ø A [mm] 8 B [mm] G1/4A C [mm] 24,5 SW [mm] 15 E [mm] 6,0 Ø F [mm] – G [mm] 7 Weight [g] 17 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/8A tube outer diameter 8mm SKU: 86010818](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-8a-tube-outer-diameter-8mm-sku-86010818/): Ø A [mm] 8 B [mm] G1/8A C [mm] 26 SW [mm] 14 E [mm] 5,0 Ø F [mm] – G [mm] 6 Weight [g] 15 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/4A tube outer diameter 6mm SKU: 86010628](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-4a-tube-outer-diameter-6mm-sku-86010628/): Ø A [mm] 6 B [mm] G1/4A C [mm] 22 SW [mm] 15 E [mm] 4,0 Ø F [mm] – G [mm] 7 Weight [g] 13 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with o-ring thread G1/8A tube outer diameter 6mm SKU: 86010618](https://maedler.in/product/straight-adaptor-with-o-ring-thread-g1-8a-tube-outer-diameter-6mm-sku-86010618/): Ø A [mm] 6 B [mm] G1/8A C [mm] 21 SW [mm] 12 E [mm] 4,0 Ø F [mm] – G [mm] 6 Weight [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor with sealing ring thread M5 tube outer diameter 6mm SKU: 86010605](https://maedler.in/product/straight-adaptor-with-sealing-ring-thread-m5-tube-outer-diameter-6mm-sku-86010605/): Ø A [mm] 6 B [mm] M5x0,8 C [mm] 21 SW [mm] – E [mm] 2,0 Ø F [mm] 10,4 G [mm] 4 Weight [g] 6 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane timing belt T10 width 32mm Lw 1140mm 114 teeth 32 T10/1140 SKU: 16483000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1140mm-114-teeth-32-t10-1140-sku-16483000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1110mm 111 teeth 32 T10/1110 SKU: 16482900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1110mm-111-teeth-32-t10-1110-sku-16482900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1080mm 108 teeth 32 T10/1080 SKU: 16482800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1080mm-108-teeth-32-t10-1080-sku-16482800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1010mm 101 teeth 32 T10/1010 SKU: 16482700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1010mm-101-teeth-32-t10-1010-sku-16482700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 980mm 98 teeth 32 T10/980 SKU: 16482600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-980mm-98-teeth-32-t10-980-sku-16482600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 970mm 97 teeth 32 T10/970 SKU: 16482500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-970mm-97-teeth-32-t10-970-sku-16482500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 960mm 96 teeth 32 T10/960 SKU: 16482400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-960mm-96-teeth-32-t10-960-sku-16482400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 920mm 92 teeth 32 T10/920 SKU: 16482300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-920mm-92-teeth-32-t10-920-sku-16482300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 900mm 90 teeth 32 T10/900 SKU: 16482200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-900mm-90-teeth-32-t10-900-sku-16482200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 890mm 89 teeth 32 T10/890 SKU: 16482100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-890mm-89-teeth-32-t10-890-sku-16482100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 880mm 88 teeth 32 T10/880 SKU: 16482000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-880mm-88-teeth-32-t10-880-sku-16482000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 840mm 84 teeth 32 T10/840 SKU: 16481900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-840mm-84-teeth-32-t10-840-sku-16481900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 810mm 81 teeth 32 T10/810 SKU: 16481800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-810mm-81-teeth-32-t10-810-sku-16481800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 780mm 78 teeth 32 T10/780 SKU: 16481700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-780mm-78-teeth-32-t10-780-sku-16481700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 750mm 75 teeth 32 T10/750 SKU: 16481600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-750mm-75-teeth-32-t10-750-sku-16481600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 720mm 72 teeth 32 T10/720 SKU: 16481500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-720mm-72-teeth-32-t10-720-sku-16481500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 700mm 70 teeth 32 T10/700 SKU: 16481400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-700mm-70-teeth-32-t10-700-sku-16481400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 690mm 69 teeth 32 T10/690 SKU: 16481300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-690mm-69-teeth-32-t10-690-sku-16481300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 660mm 66 teeth 32 T10/660 SKU: 16481200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-660mm-66-teeth-32-t10-660-sku-16481200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 630mm 63 teeth 32 T10/630 SKU: 16481100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-630mm-63-teeth-32-t10-630-sku-16481100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 610mm 61 teeth 32 T10/610 SKU: 16481000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-610mm-61-teeth-32-t10-610-sku-16481000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 560mm 56 teeth 32 T10/560 SKU: 16480900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-560mm-56-teeth-32-t10-560-sku-16480900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 530mm 53 teeth 32 T10/530 SKU: 16480800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-530mm-53-teeth-32-t10-530-sku-16480800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 500mm 50 teeth 32 T10/500 SKU: 16480700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-500mm-50-teeth-32-t10-500-sku-16480700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 450mm 45 teeth 32 T10/450 SKU: 16480600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-450mm-45-teeth-32-t10-450-sku-16480600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 440mm 44 teeth 32 T10/440 SKU: 16480500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-440mm-44-teeth-32-t10-440-sku-16480500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 410mm 41 teeth 32 T10/410 SKU: 16480400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-410mm-41-teeth-32-t10-410-sku-16480400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 400mm 40 teeth 32 T10/400 SKU: 16480300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-400mm-40-teeth-32-t10-400-sku-16480300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 370mm 37 teeth 32 T10/370 SKU: 16480200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-370mm-37-teeth-32-t10-370-sku-16480200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 260mm 26 teeth 32 T10/260 SKU: 16480100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-260mm-26-teeth-32-t10-260-sku-16480100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm 32T10 open length PAZ = Polyamide fabric on tooth side SKU: 16480001](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-32t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16480001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 32mm 32 T10 open length with tensile members from steel packed 2 x 16mm SKU: 16480000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-32-t10-open-length-with-tensile-members-from-steel-packed-2-x-16mm-sku-16480000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T10 belt width 25mm SKU: 16479900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-25mm-sku-16479900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Timing belt pulley from steel T10 96 teeth belt width 32mm for taper bush 2517 SKU: 16477496](https://maedler.in/product/timing-belt-pulley-from-steel-t10-96-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477496/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 84 teeth belt width 32mm for taper bush 2517 SKU: 16477484](https://maedler.in/product/timing-belt-pulley-from-steel-t10-84-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477484/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 72 teeth belt width 32mm for taper bush 2517 SKU: 16477472](https://maedler.in/product/timing-belt-pulley-from-steel-t10-72-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477472/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 60 teeth belt width 32mm for taper bush 2517 SKU: 16477460](https://maedler.in/product/timing-belt-pulley-from-steel-t10-60-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477460/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 48 teeth belt width 32mm for taper bush 2517 SKU: 16477448](https://maedler.in/product/timing-belt-pulley-from-steel-t10-48-teeth-belt-width-32mm-for-taper-bush-2517-sku-16477448/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 44 teeth belt width 32mm for taper bush 2012 SKU: 16477444](https://maedler.in/product/timing-belt-pulley-from-steel-t10-44-teeth-belt-width-32mm-for-taper-bush-2012-sku-16477444/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 40 teeth belt width 32mm for taper bush 2012 SKU: 16477440](https://maedler.in/product/timing-belt-pulley-from-steel-t10-40-teeth-belt-width-32mm-for-taper-bush-2012-sku-16477440/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 36 teeth belt width 32mm for taper bush 2012 SKU: 16477436](https://maedler.in/product/timing-belt-pulley-from-steel-t10-36-teeth-belt-width-32mm-for-taper-bush-2012-sku-16477436/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 32 teeth belt width 32mm for taper bush 1615 SKU: 16477432](https://maedler.in/product/timing-belt-pulley-from-steel-t10-32-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477432/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 30 teeth belt width 32mm for taper bush 1615 SKU: 16477430](https://maedler.in/product/timing-belt-pulley-from-steel-t10-30-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477430/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 28 teeth belt width 32mm for taper bush 1615 SKU: 16477428](https://maedler.in/product/timing-belt-pulley-from-steel-t10-28-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477428/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 27 teeth belt width 32mm for taper bush 1615 SKU: 16477427](https://maedler.in/product/timing-belt-pulley-from-steel-t10-27-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477427/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 26 teeth belt width 32mm for taper bush 1615 SKU: 16477426](https://maedler.in/product/timing-belt-pulley-from-steel-t10-26-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477426/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 25 teeth belt width 32mm for taper bush 1615 SKU: 16477425](https://maedler.in/product/timing-belt-pulley-from-steel-t10-25-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477425/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 24 teeth belt width 32mm for taper bush 1615 SKU: 16477424](https://maedler.in/product/timing-belt-pulley-from-steel-t10-24-teeth-belt-width-32mm-for-taper-bush-1615-sku-16477424/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 22 teeth belt width 32mm for taper bush 1210 SKU: 16477422](https://maedler.in/product/timing-belt-pulley-from-steel-t10-22-teeth-belt-width-32mm-for-taper-bush-1210-sku-16477422/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 20 teeth belt width 32mm for taper bush 1108 SKU: 16477420](https://maedler.in/product/timing-belt-pulley-from-steel-t10-20-teeth-belt-width-32mm-for-taper-bush-1108-sku-16477420/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 19 teeth belt width 32mm for taper bush 1108 SKU: 16477419](https://maedler.in/product/timing-belt-pulley-from-steel-t10-19-teeth-belt-width-32mm-for-taper-bush-1108-sku-16477419/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 18 teeth belt width 32mm for taper bush 1008 SKU: 16477418](https://maedler.in/product/timing-belt-pulley-from-steel-t10-18-teeth-belt-width-32mm-for-taper-bush-1008-sku-16477418/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 96 teeth belt width 25mm for taper bush 2517 SKU: 16477396](https://maedler.in/product/timing-belt-pulley-from-steel-t10-96-teeth-belt-width-25mm-for-taper-bush-2517-sku-16477396/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 84 teeth belt width 25mm for taper bush 2517 SKU: 16477384](https://maedler.in/product/timing-belt-pulley-from-steel-t10-84-teeth-belt-width-25mm-for-taper-bush-2517-sku-16477384/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 72 teeth belt width 25mm for taper bush 2517 SKU: 16477372](https://maedler.in/product/timing-belt-pulley-from-steel-t10-72-teeth-belt-width-25mm-for-taper-bush-2517-sku-16477372/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 60 teeth belt width 25mm for taper bush 2012 SKU: 16477360](https://maedler.in/product/timing-belt-pulley-from-steel-t10-60-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477360/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 48 teeth belt width 25mm for taper bush 2012 SKU: 16477348](https://maedler.in/product/timing-belt-pulley-from-steel-t10-48-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477348/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 44 teeth belt width 25mm for taper bush 2012 SKU: 16477344](https://maedler.in/product/timing-belt-pulley-from-steel-t10-44-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477344/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 40 teeth belt width 25mm for taper bush 2012 SKU: 16477340](https://maedler.in/product/timing-belt-pulley-from-steel-t10-40-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477340/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 36 teeth belt width 25mm for taper bush 2012 SKU: 16477336](https://maedler.in/product/timing-belt-pulley-from-steel-t10-36-teeth-belt-width-25mm-for-taper-bush-2012-sku-16477336/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 32 teeth belt width 25mm for taper bush 1610 SKU: 16477332](https://maedler.in/product/timing-belt-pulley-from-steel-t10-32-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477332/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 30 teeth belt width 25mm for taper bush 1610 SKU: 16477330](https://maedler.in/product/timing-belt-pulley-from-steel-t10-30-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477330/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 28 teeth belt width 25mm for taper bush 1610 SKU: 16477328](https://maedler.in/product/timing-belt-pulley-from-steel-t10-28-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477328/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 27 teeth belt width 25mm for taper bush 1610 SKU: 16477327](https://maedler.in/product/timing-belt-pulley-from-steel-t10-27-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477327/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 26 teeth belt width 25mm for taper bush 1610 SKU: 16477326](https://maedler.in/product/timing-belt-pulley-from-steel-t10-26-teeth-belt-width-25mm-for-taper-bush-1610-sku-16477326/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 25 teeth belt width 25mm for taper bush 1108 SKU: 16477325](https://maedler.in/product/timing-belt-pulley-from-steel-t10-25-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477325/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 24 teeth belt width 25mm for taper bush 1108 SKU: 16477324](https://maedler.in/product/timing-belt-pulley-from-steel-t10-24-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477324/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 22 teeth belt width 25mm for taper bush 1108 SKU: 16477322](https://maedler.in/product/timing-belt-pulley-from-steel-t10-22-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477322/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 20 teeth belt width 25mm for taper bush 1108 SKU: 16477320](https://maedler.in/product/timing-belt-pulley-from-steel-t10-20-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477320/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 19 teeth belt width 25mm for taper bush 1108 SKU: 16477319](https://maedler.in/product/timing-belt-pulley-from-steel-t10-19-teeth-belt-width-25mm-for-taper-bush-1108-sku-16477319/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 18 teeth belt width 25mm for taper bush 1008 SKU: 16477318](https://maedler.in/product/timing-belt-pulley-from-steel-t10-18-teeth-belt-width-25mm-for-taper-bush-1008-sku-16477318/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 96 teeth belt width 16mm for taper bush 2517 SKU: 16477296](https://maedler.in/product/timing-belt-pulley-from-steel-t10-96-teeth-belt-width-16mm-for-taper-bush-2517-sku-16477296/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 84 teeth belt width 16mm for taper bush 2517 SKU: 16477284](https://maedler.in/product/timing-belt-pulley-from-steel-t10-84-teeth-belt-width-16mm-for-taper-bush-2517-sku-16477284/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 72 teeth belt width 16mm for taper bush 2517 SKU: 16477272](https://maedler.in/product/timing-belt-pulley-from-steel-t10-72-teeth-belt-width-16mm-for-taper-bush-2517-sku-16477272/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 64 teeth belt width 16mm for taper bush 2517 SKU: 16477264](https://maedler.in/product/timing-belt-pulley-from-steel-t10-64-teeth-belt-width-16mm-for-taper-bush-2517-sku-16477264/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 60 teeth belt width 16mm for taper bush 2012 SKU: 16477260](https://maedler.in/product/timing-belt-pulley-from-steel-t10-60-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477260/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 56 teeth belt width 16mm for taper bush 2012 SKU: 16477256](https://maedler.in/product/timing-belt-pulley-from-steel-t10-56-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477256/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 48 teeth belt width 16mm for taper bush 2012 SKU: 16477248](https://maedler.in/product/timing-belt-pulley-from-steel-t10-48-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477248/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 44 teeth belt width 16mm for taper bush 2012 SKU: 16477244](https://maedler.in/product/timing-belt-pulley-from-steel-t10-44-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477244/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 42 teeth belt width 16mm for taper bush 2012 SKU: 16477242](https://maedler.in/product/timing-belt-pulley-from-steel-t10-42-teeth-belt-width-16mm-for-taper-bush-2012-sku-16477242/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 40 teeth belt width 16mm for taper bush 1610 SKU: 16477240](https://maedler.in/product/timing-belt-pulley-from-steel-t10-40-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477240/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 36 teeth belt width 16mm for taper bush 1610 SKU: 16477236](https://maedler.in/product/timing-belt-pulley-from-steel-t10-36-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477236/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 32 teeth belt width 16mm for taper bush 1610 SKU: 16477232](https://maedler.in/product/timing-belt-pulley-from-steel-t10-32-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477232/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 30 teeth belt width 16mm for taper bush 1610 SKU: 16477230](https://maedler.in/product/timing-belt-pulley-from-steel-t10-30-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477230/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 28 teeth belt width 16mm for taper bush 1610 SKU: 16477228](https://maedler.in/product/timing-belt-pulley-from-steel-t10-28-teeth-belt-width-16mm-for-taper-bush-1610-sku-16477228/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 27 teeth belt width 16mm for taper bush 1210 SKU: 16477227](https://maedler.in/product/timing-belt-pulley-from-steel-t10-27-teeth-belt-width-16mm-for-taper-bush-1210-sku-16477227/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 26 teeth belt width 16mm for taper bush 1210 SKU: 16477226](https://maedler.in/product/timing-belt-pulley-from-steel-t10-26-teeth-belt-width-16mm-for-taper-bush-1210-sku-16477226/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 25 teeth belt width 16mm for taper bush 1210 SKU: 16477225](https://maedler.in/product/timing-belt-pulley-from-steel-t10-25-teeth-belt-width-16mm-for-taper-bush-1210-sku-16477225/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 24 teeth belt width 16mm for taper bush 1210 SKU: 16477224](https://maedler.in/product/timing-belt-pulley-from-steel-t10-24-teeth-belt-width-16mm-for-taper-bush-1210-sku-16477224/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 22 teeth belt width 16mm for taper bush 1108 SKU: 16477222](https://maedler.in/product/timing-belt-pulley-from-steel-t10-22-teeth-belt-width-16mm-for-taper-bush-1108-sku-16477222/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 20 teeth belt width 16mm for taper bush 1108 SKU: 16477220](https://maedler.in/product/timing-belt-pulley-from-steel-t10-20-teeth-belt-width-16mm-for-taper-bush-1108-sku-16477220/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 19 teeth belt width 16mm for taper bush 1108 SKU: 16477219](https://maedler.in/product/timing-belt-pulley-from-steel-t10-19-teeth-belt-width-16mm-for-taper-bush-1108-sku-16477219/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel T10 18 teeth belt width 16mm for taper bush 1008 SKU: 16477218](https://maedler.in/product/timing-belt-pulley-from-steel-t10-18-teeth-belt-width-16mm-for-taper-bush-1008-sku-16477218/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt T10 width 25mm Lw 2250mm 225 teeth 25 T10/2250 SKU: 16475100](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-2250mm-225-teeth-25-t10-2250-sku-16475100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1960mm 196 teeth 25 T10/1960 SKU: 16475000](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1960mm-196-teeth-25-t10-1960-sku-16475000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1880mm 188 teeth 25 T10/1880 SKU: 16474900](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1880mm-188-teeth-25-t10-1880-sku-16474900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1780mm 178 teeth 25 T10/1780 SKU: 16474800](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1780mm-178-teeth-25-t10-1780-sku-16474800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1750mm 175 teeth 25 T10/1750 SKU: 16474700](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1750mm-175-teeth-25-t10-1750-sku-16474700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1610mm 161 teeth 25 T10/1610 SKU: 16474600](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1610mm-161-teeth-25-t10-1610-sku-16474600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 25mm Lw 1560mm 156 teeth 25 T10/1560 SKU: 16474500](https://maedler.in/product/polyurethane-timing-belt-t10-width-25mm-lw-1560mm-156-teeth-25-t10-1560-sku-16474500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane hose PU, color blue outer diameter 12mm inner diameter 8mm SKU: 86991202](https://maedler.in/product/polyurethane-hose-pu-color-blue-outer-diameter-12mm-inner-diameter-8mm-sku-86991202/): Outer Ø [mm] 12 Inner Ø [mm] 8 Colour Blau Pressure max. [bar] 9 Bending Radius [min] 25 Weight per m [g] 100 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color natural outer diameter 12mm inner diameter, 8mm SKU: 86991201](https://maedler.in/product/polyurethane-hose-pu-color-natural-outer-diameter-12mm-inner-diameter-8mm-sku-86991201/): Outer Ø [mm] 12 Inner Ø [mm] 8 Colour Natur Pressure max. [bar] 9 Bending Radius [min] 25 Weight per m [g] 100 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color black outer diameter 10mm inner diameter 7mm SKU: 86991003](https://maedler.in/product/polyurethane-hose-pu-color-black-outer-diameter-10mm-inner-diameter-7mm-sku-86991003/): Outer Ø [mm] 10 Inner Ø [mm] 7 Colour Schwarz Pressure max. [bar] 9 Bending Radius [min] 17 Weight per m [g] 50 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color blue outer diameter 10mm inner diameter 7mm SKU: 86991002](https://maedler.in/product/polyurethane-hose-pu-color-blue-outer-diameter-10mm-inner-diameter-7mm-sku-86991002/): Outer Ø [mm] 10 Inner Ø [mm] 7 Colour Blau Pressure max. [bar] 9 Bending Radius [min] 17 Weight per m [g] 50 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color natural outer diameter 10mm inner diameter 7mm SKU: 86991001](https://maedler.in/product/polyurethane-hose-pu-color-natural-outer-diameter-10mm-inner-diameter-7mm-sku-86991001/): Outer Ø [mm] 10 Inner Ø [mm] 7 Colour Natur Pressure max. [bar] 9 Bending Radius [min] 17 Weight per m [g] 50 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color black outer diameter 8mm inner diameter, 5,5mm SKU: 86990803](https://maedler.in/product/polyurethane-hose-pu-color-black-outer-diameter-8mm-inner-diameter-55mm-sku-86990803/): Outer Ø [mm] 8 Inner Ø [mm] 5,5 Colour Schwarz Pressure max. [bar] 9 Bending Radius [min] 16 Weight per m [g] 40 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color blue outer diameter 8mm inner diameter, 5,5mm SKU: 86990802](https://maedler.in/product/polyurethane-hose-pu-color-blue-outer-diameter-8mm-inner-diameter-55mm-sku-86990802/): Outer Ø [mm] 8 Inner Ø [mm] 5,5 Colour Blau Pressure max. [bar] 9 Bending Radius [min] 16 Weight per m [g] 40 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color natural outer diameter 8mm, inner diameter 5,5mm SKU: 86990801](https://maedler.in/product/polyurethane-hose-pu-color-natural-outer-diameter-8mm-inner-diameter-55mm-sku-86990801/): Outer Ø [mm] 8 Inner Ø [mm] 5,5 Colour Natur Pressure max. [bar] 9 Bending Radius [min] 16 Weight per m [g] 40 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color black outer diameter 6mm inner diameter, 4mm SKU: 86990603](https://maedler.in/product/polyurethane-hose-pu-color-black-outer-diameter-6mm-inner-diameter-4mm-sku-86990603/): Outer Ø [mm] 6 Inner Ø [mm] 4 Colour Schwarz Pressure max. [bar] 9 Bending Radius [min] 9 Weight per m [g] 25 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color blue outer diameter 6mm inner diameter, 4mm SKU: 86990602](https://maedler.in/product/polyurethane-hose-pu-color-blue-outer-diameter-6mm-inner-diameter-4mm-sku-86990602/): Outer Ø [mm] 6 Inner Ø [mm] 4 Colour Blau Pressure max. [bar] 9 Bending Radius [min] 9 Weight per m [g] 25 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color natural outer diameter 6mm, inner diameter 4mm SKU: 86990601](https://maedler.in/product/polyurethane-hose-pu-color-natural-outer-diameter-6mm-inner-diameter-4mm-sku-86990601/): Outer Ø [mm] 6 Inner Ø [mm] 4 Colour Natur Pressure max. [bar] 9 Bending Radius [min] 9 Weight per m [g] 25 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyuerthanschlauch PU, color black outer diameter 4mm inner diameter 2,5mm SKU: 86990403](https://maedler.in/product/polyuerthanschlauch-pu-color-black-outer-diameter-4mm-inner-diameter-25mm-sku-86990403/): Outer Ø [mm] 4 Inner Ø [mm] 2,5 Colour Schwarz Pressure max. [bar] 10 Bending Radius [min] 6 Weight per m [g] 13 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color blue outer diameter 4mm inner diameter 2,5mm SKU: 86990402](https://maedler.in/product/polyurethane-hose-pu-color-blue-outer-diameter-4mm-inner-diameter-25mm-sku-86990402/): Outer Ø [mm] 4 Inner Ø [mm] 2,5 Colour Blau Pressure max. [bar] 10 Bending Radius [min] 6 Weight per m [g] 13 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color natural outer diameter 4mm, inner diameter 2,5mm SKU: 86990401](https://maedler.in/product/polyurethane-hose-pu-color-natural-outer-diameter-4mm-inner-diameter-25mm-sku-86990401/): Outer Ø [mm] 4 Inner Ø [mm] 2,5 Colour Natur Pressure max. [bar] 10 Bending Radius [min] 6 Weight per m [g] 13 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color black outer diameter 12mm inner diameter, 9mm SKU: 86981203](https://maedler.in/product/polyamide-hose-pa-hard-color-black-outer-diameter-12mm-inner-diameter-9mm-sku-86981203/): Outer Ø [mm] 12 Inner Ø [mm] 9 Colour Schwarz Pressure max. [bar] 18 Bending Radius min.[mm] 75 Weight per m [g] 70 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color blue outer diameter 12mm inner diameter, 9mm SKU: 86981202](https://maedler.in/product/polyamide-hose-pa-hard-color-blue-outer-diameter-12mm-inner-diameter-9mm-sku-86981202/): Outer Ø [mm] 12 Inner Ø [mm] 9 Colour Blau Pressure max. [bar] 18 Bending Radius min.[mm] 75 Weight per m [g] 70 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color natural outer diameter 12mm inner diameter 9mm SKU: 86981201](https://maedler.in/product/polyamide-hose-pa-hard-color-natural-outer-diameter-12mm-inner-diameter-9mm-sku-86981201/): Outer Ø [mm] 12 Inner Ø [mm] 9 Colour Natur Pressure max. [bar] 18 Bending Radius min.[mm] 75 Weight per m [g] 70 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color black outer diameter 10mm inner diameter 7,5mm SKU: 86981003](https://maedler.in/product/polyamide-hose-pa-hard-color-black-outer-diameter-10mm-inner-diameter-75mm-sku-86981003/): Outer Ø [mm] 10 Inner Ø [mm] 7,5 Colour Schwarz Pressure max. [bar] 24 Bending Radius min.[mm] 60 Weight per m [g] 50 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color blue outer diameter 10mm inner diameter 7,5mm SKU: 86981002](https://maedler.in/product/polyamide-hose-pa-hard-color-blue-outer-diameter-10mm-inner-diameter-75mm-sku-86981002/): Outer Ø [mm] 10 Inner Ø [mm] 7,5 Colour Blau Pressure max. [bar] 24 Bending Radius min.[mm] 60 Weight per m [g] 50 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color natural outer diameter 10mm inner diameter 7,5mm SKU: 86981001](https://maedler.in/product/polyamide-hose-pa-hard-color-natural-outer-diameter-10mm-inner-diameter-75mm-sku-86981001/): Outer Ø [mm] 10 Inner Ø [mm] 7,5 Colour Natur Pressure max. [bar] 24 Bending Radius min.[mm] 60 Weight per m [g] 50 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color black outer diameter 8mm, inner diameter 6mm SKU: 86980803](https://maedler.in/product/polyamide-hose-pa-hard-color-black-outer-diameter-8mm-inner-diameter-6mm-sku-86980803/): Outer Ø [mm] 8 Inner Ø [mm] 6 Colour Schwarz Pressure max. [bar] 19 Bending Radius min.[mm] 50 Weight per m [g] 30 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color blue outer diameter 8mm inner diameter 6mm SKU: 86980802](https://maedler.in/product/polyamide-hose-pa-hard-color-blue-outer-diameter-8mm-inner-diameter-6mm-sku-86980802/): Outer Ø [mm] 8 Inner Ø [mm] 6 Colour Blau Pressure max. [bar] 19 Bending Radius min.[mm] 50 Weight per m [g] 30 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color natural outer diameter 8mm, inner diameter 6mm SKU: 86980801](https://maedler.in/product/polyamide-hose-pa-hard-color-natural-outer-diameter-8mm-inner-diameter-6mm-sku-86980801/): Outer Ø [mm] 8 Inner Ø [mm] 6 Colour Natur Pressure max. [bar] 19 Bending Radius min.[mm] 50 Weight per m [g] 30 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color black outer diameter 6mm, inner diameter 4mm SKU: 86980603](https://maedler.in/product/polyamide-hose-pa-hard-color-black-outer-diameter-6mm-inner-diameter-4mm-sku-86980603/): Outer Ø [mm] 6 Inner Ø [mm] 4 Colour Schwarz Pressure max. [bar] 25 Bending Radius min.[mm] 30 Weight per m [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color blue outer diameter 6mm inner diameter 4mm SKU: 86980602](https://maedler.in/product/polyamide-hose-pa-hard-color-blue-outer-diameter-6mm-inner-diameter-4mm-sku-86980602/): Outer Ø [mm] 6 Inner Ø [mm] 4 Colour Blau Pressure max. [bar] 25 Bending Radius min.[mm] 30 Weight per m [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color natural outer diameter 6mm, inner diameter 4mm SKU: 86980601](https://maedler.in/product/polyamide-hose-pa-hard-color-natural-outer-diameter-6mm-inner-diameter-4mm-sku-86980601/): Outer Ø [mm] 6 Inner Ø [mm] 4 Colour Natur Pressure max. [bar] 25 Bending Radius min.[mm] 30 Weight per m [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color black outer diameter 4mm, inner diameter 2,5mm SKU: 86980403](https://maedler.in/product/polyamide-hose-pa-hard-color-black-outer-diameter-4mm-inner-diameter-25mm-sku-86980403/): Outer Ø [mm] 4 Inner Ø [mm] 2,5 Colour Schwarz Pressure max. [bar] 28 Bending Radius min.[mm] 25 Weight per m [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color blue outer diameter 4mm, inner diameter 2,5mm SKU: 86980402](https://maedler.in/product/polyamide-hose-pa-hard-color-blue-outer-diameter-4mm-inner-diameter-25mm-sku-86980402/): Outer Ø [mm] 4 Inner Ø [mm] 2,5 Colour Blau Pressure max. [bar] 28 Bending Radius min.[mm] 25 Weight per m [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyamide hose PA (hard), color natural outer diameter 4mm, inner diameter 2,5mm SKU: 86980401](https://maedler.in/product/polyamide-hose-pa-hard-color-natural-outer-diameter-4mm-inner-diameter-25mm-sku-86980401/): Outer Ø [mm] 4 Inner Ø [mm] 2,5 Colour Natur Pressure max. [bar] 28 Bending Radius min.[mm] 25 Weight per m [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel tee adaptor tube outer diameter 8mm, thread G1/8 SKU: 86660818](https://maedler.in/product/swivel-tee-adaptor-tube-outer-diameter-8mm-thread-g1-8-sku-86660818/): Ø A [mm] 8 B G1/8 C [mm] 44,5 C1 [mm] 26 G [mm] 6 G1 [mm] 18,5 Ø K [mm] 14 Z [mm] 14 Weight [g] 21 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel tee adaptor tube outer diameter 8mm, thread G1/4 SKU: 86660814](https://maedler.in/product/swivel-tee-adaptor-tube-outer-diameter-8mm-thread-g1-4-sku-86660814/): Ø A [mm] 8 B G1/4 C [mm] 44,5 C1 [mm] 28 G [mm] 8 G1 [mm] 18,5 Ø K [mm] 14 Z [mm] 17 Weight [g] 26,7 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel tee adaptor tube outer diameter 6mm, thread G1/8 SKU: 86660618](https://maedler.in/product/swivel-tee-adaptor-tube-outer-diameter-6mm-thread-g1-8-sku-86660618/): Ø A [mm] 6 B G1/8 C [mm] 41 C1 [mm] 24,5 G [mm] 6 G1 [mm] 17,5 Ø K [mm] 12 Z [mm] 14 Weight [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel tee adaptor tube outer diameter 6mm, thread G1/4 SKU: 86660614](https://maedler.in/product/swivel-tee-adaptor-tube-outer-diameter-6mm-thread-g1-4-sku-86660614/): Ø A [mm] 6 B G1/4 C [mm] 41 C1 [mm] 26,5 G [mm] 8 G1 [mm] 17,5 Ø K [mm] 12 Z [mm] 17 Weight [g] 24,6 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel tee adaptor tube outer diameter 4mm, thread G1/8 SKU: 86660418](https://maedler.in/product/swivel-tee-adaptor-tube-outer-diameter-4mm-thread-g1-8-sku-86660418/): Ø A [mm] 4 B G1/8 C [mm] 37,5 C1 [mm] 22 G [mm] 6 G1 [mm] 17 Ø K [mm] 9,5 Z [mm] 14 Weight [g] 11 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel tee adaptor tube outer diameter 4mm, thread G1/4 SKU: 86660414](https://maedler.in/product/swivel-tee-adaptor-tube-outer-diameter-4mm-thread-g1-4-sku-86660414/): Ø A [mm] 4 B G1/4 C [mm] 37,5 C1 [mm] 24 G [mm] 8 G1 [mm] 17 Ø K [mm] 9,5 Z [mm] 17 Weight [g] 20,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 8mm, thread G1/8 SKU: 86650818](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-8mm-thread-g1-8-sku-86650818/): Ø A [mm] 8 B G1/8 C [mm] 26 E [mm] 23 G [mm] 8 G1 [mm] 18,5 Ø K [mm] 14 Z [mm] 14 Weight [g] 17 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 8mm, thread G1/4 SKU: 86650814](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-8mm-thread-g1-4-sku-86650814/): Ø A [mm] 8 B G1/4 C [mm] 28 E [mm] 23 G [mm] 8 G1 [mm] 18,5 Ø K [mm] 14 Z [mm] 21 Weight [g] 25,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 6mm, thread G1/8 SKU: 86650618](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-6mm-thread-g1-8-sku-86650618/): Ø A [mm] 6 B G1/8 C [mm] 24,5 E [mm] 20,5 G [mm] 6 G1 [mm] 17,5 Ø K [mm] 12 Z [mm] 14 Weight [g] 17 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 6mm, thread G1/4 SKU: 86650614](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-6mm-thread-g1-4-sku-86650614/): Ø A [mm] 6 B G1/4 C [mm] 26,5 E [mm] 20,5 G [mm] 8 G1 [mm] 17,5 Ø K [mm] 12 Z [mm] 17 Weight [g] 21,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 4mm, thread G1/8 SKU: 86650418](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-4mm-thread-g1-8-sku-86650418/): Ø A [mm] 4 B G1/8 C [mm] 22,5 E [mm] 18,5 G [mm] 6 G1 [mm] 17 Ø K [mm] 9,5 Z [mm] 14 Weight [g] 14,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 4mm, thread G1/4 SKU: 86650414](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-4mm-thread-g1-4-sku-86650414/): Ø A [mm] 4 B G1/4 C [mm] 24,5 E [mm] 18,5 G [mm] 8 G1 [mm] 17 Ø K [mm] 9,5 Z [mm] 17 Weight [g] 18 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 8mm, thread R1/8 SKU: 86640818](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-8mm-thread-r1-8-sku-86640818/): Ø A [mm] 8 B R1/8 C [mm] 28 E [mm] 23 G [mm] 8 G1 [mm] 18,5 Ø K [mm] 14 Z [mm] 14 Weight [g] 19 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 8mm, thread R1/4 SKU: 86640814](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-8mm-thread-r1-4-sku-86640814/): Ø A [mm] 8 B R1/4 C [mm] 31 E [mm] 23 G [mm] 10 G1 [mm] 18,5 Ø K [mm] 14 Z [mm] 14 Weight [g] 21 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 6mm, thread R1/8 SKU: 86640618](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-6mm-thread-r1-8-sku-86640618/): Ø A [mm] 6 B R1/8 C [mm] 26,5 E [mm] 20,5 G [mm] 8 G1 [mm] 17,5 Ø K [mm] 12 Z [mm] 12 Weight [g] 17 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 6mm, thread R1/4 SKU: 86640614](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-6mm-thread-r1-4-sku-86640614/): Ø A [mm] 6 B R1/4 C [mm] 29,5 E [mm] 20,5 G [mm] 10 G1 [mm] 17,5 Ø K [mm] 12 Z [mm] 14 Weight [g] 20,4 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 4mm, thread R1/8 SKU: 86640418](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-4mm-thread-r1-8-sku-86640418/): Ø A [mm] 4 B R1/8 C [mm] 24,5 E [mm] 18,5 G [mm] 8 G1 [mm] 17 Ø K [mm] 9,5 Z [mm] 10 Weight [g] 11 CATALOG PRODUCT PAGE CAD FILES (download) - [Swivel elbow adaptor tube outer diameter 4mm, thread R1/4 SKU: 86640414](https://maedler.in/product/swivel-elbow-adaptor-tube-outer-diameter-4mm-thread-r1-4-sku-86640414/): Ø A [mm] 4 B R1/4 C [mm] 26,5 E [mm] 18,5 G [mm] 10 G1 [mm] 17 Ø K [mm] 9,5 Z [mm] 14 Weight [g] 16,9 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 8mm, thread G1/8 SKU: 86630818](https://maedler.in/product/straight-adaptor-tube-outer-diameter-8mm-thread-g1-8-sku-86630818/): Ø A [mm] 8 B G1/8 C [mm] 26,5 G [mm] 6 G1 [mm] 17,5 Ø K [mm] 14 Z [mm] 15 Z1 [mm] 5 Weight [g] 17,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 8mm, thread G1/4 SKU: 86630814](https://maedler.in/product/straight-adaptor-tube-outer-diameter-8mm-thread-g1-4-sku-86630814/): Ø A [mm] 8 B G1/4 C [mm] 26,5 G [mm] 8 G1 [mm] 17,5 Ø K [mm] 14 Z [mm] 15 Z1 [mm] 6 Weight [g] 16,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 6mm, thread G1/8 SKU: 86630618](https://maedler.in/product/straight-adaptor-tube-outer-diameter-6mm-thread-g1-8-sku-86630618/): Ø A [mm] 6 B G1/8 C [mm] 26,5 G [mm] 6 G1 [mm] 17,5 Ø K [mm] 12 Z [mm] 15 Z1 [mm] 5 Weight [g] 10,9 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 6mm, thread G1/4 SKU: 86630614](https://maedler.in/product/straight-adaptor-tube-outer-diameter-6mm-thread-g1-4-sku-86630614/): Ø A [mm] 6 B G1/4 C [mm] 24,5 G [mm] 8 G1 [mm] 16,5 Ø K [mm] 12 Z [mm] 15 Z1 [mm] 5 Weight [g] 17,9 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 4mm, thread G1/8 SKU: 86630418](https://maedler.in/product/straight-adaptor-tube-outer-diameter-4mm-thread-g1-8-sku-86630418/): Ø A [mm] 4 B G1/8 C [mm] 21,5 G [mm] 6 G1 [mm] 16 Ø K [mm] 9,5 Z [mm] 13 Z1 [mm] 3 Weight [g] 11,7 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 4mm, thread G1/4 SKU: 86630414](https://maedler.in/product/straight-adaptor-tube-outer-diameter-4mm-thread-g1-4-sku-86630414/): Ø A [mm] 4 B G1/4 C [mm] 23,5 G [mm] 8 G1 [mm] 16 Ø K [mm] 9,5 Z [mm] 15 Z1 [mm] 3 Weight [g] 18,9 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 8mm, thread R1/8 SKU: 86620818](https://maedler.in/product/straight-adaptor-tube-outer-diameter-8mm-thread-r1-8-sku-86620818/): Ø A [mm] 8 B R1/8 C [mm] 27,5 G [mm] 8 G1 [mm] 17,5 Ø K [mm] 14 Z [mm] 14 Z1 [mm] 5 Weight [g] 15,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 8mm, thread R1/4 SKU: 86620814](https://maedler.in/product/straight-adaptor-tube-outer-diameter-8mm-thread-r1-4-sku-86620814/): Ø A [mm] 8 B R1/4 C [mm] 25,5 G [mm] 10 G1 [mm] 17,5 Ø K [mm] 14 Z [mm] 14 Z1 [mm] 6 Weight [g] 15,4 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 6mm, thread R1/8 SKU: 86620618](https://maedler.in/product/straight-adaptor-tube-outer-diameter-6mm-thread-r1-8-sku-86620618/): Ø A [mm] 6 B R1/8 C [mm] 22 G [mm] 8 G1 [mm] 16,5 Ø K [mm] 12 Z [mm] 12 Z1 [mm] 4 Weight [g] 10,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 6mm, thread R1/4 SKU: 86620614](https://maedler.in/product/straight-adaptor-tube-outer-diameter-6mm-thread-r1-4-sku-86620614/): Ø A [mm] 6 B R1/4 C [mm] 21 G [mm] 10 G1 [mm] 16,5 Ø K [mm] 12 Z [mm] 14 Z1 [mm] 5 Weight [g] 14,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 4mm, thread R1/8 SKU: 86620418](https://maedler.in/product/straight-adaptor-tube-outer-diameter-4mm-thread-r1-8-sku-86620418/): Ø A [mm] 4 B R1/8 C [mm] 21,5 G [mm] 8 G1 [mm] 16 Ø K [mm] 9,5 Z [mm] 10 Z1 [mm] 3 Weight [g] 9,5 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight adaptor tube outer diameter 4mm, thread R1/4 SKU: 86620414](https://maedler.in/product/straight-adaptor-tube-outer-diameter-4mm-thread-r1-4-sku-86620414/): Ø A [mm] 4 B R1/4 C [mm] 20,5 G [mm] 10 G1 [mm] 16 Ø K [mm] 9,5 Z [mm] 14 Z1 [mm] 3 Weight [g] 16,7 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow adaptor, tube outer diameter 8mm SKU: 86612800](https://maedler.in/product/elbow-adaptor-tube-outer-diameter-8mm-sku-86612800/): Ø A [mm] 8 Ø D [mm] 4,3 E [mm] 22,5 G [mm] 18,5 H [mm] 9 Ø K [mm] 14 O [mm] 14,5 Weight [g] 9,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow adaptor, tube outer diameter 6mm SKU: 86612600](https://maedler.in/product/elbow-adaptor-tube-outer-diameter-6mm-sku-86612600/): Ø A [mm] 6 Ø D [mm] 3,3 E [mm] 21 G [mm] 17,5 H [mm] 7,5 Ø K [mm] 12 O [mm] 12,5 Weight [g] 7,4 CATALOG PRODUCT PAGE CAD FILES (download) - [Elbow adaptor, tube outer diameter 4mm SKU: 86612400](https://maedler.in/product/elbow-adaptor-tube-outer-diameter-4mm-sku-86612400/): Ø A [mm] 4 Ø D [mm] 3,3 E [mm] 19 G [mm] 15,5 H [mm] 8,5 Ø K [mm] 9,5 O [mm] 10,5 Weight [g] 5 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight connector tube outer diameter 8mm SKU: 86610800](https://maedler.in/product/straight-connector-tube-outer-diameter-8mm-sku-86610800/): Ø A [mm] 8 C [mm] 39,5 Ø D [mm] 4,3 G [mm] 18,5 H [mm] 7 Ø K [mm] 14 O [mm] 14,5 Weight [g] 9,2 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight connector tube outer diameter 6mm SKU: 86610600](https://maedler.in/product/straight-connector-tube-outer-diameter-6mm-sku-86610600/): Ø A [mm] 6 C [mm] 37 Ø D [mm] 3,3 G [mm] 17,5 H [mm] 5,5 Ø K [mm] 12 O [mm] 12,5 Weight [g] 7,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Straight connector tube outer diameter 4mm SKU: 86610400](https://maedler.in/product/straight-connector-tube-outer-diameter-4mm-sku-86610400/): Ø A [mm] 4 C [mm] 34,5 Ø D [mm] 3,3 G [mm] 16,5 H [mm] 4,5 Ø K [mm] 9,5 O [mm] 10,5 Weight [g] 5,3 CATALOG PRODUCT PAGE CAD FILES (download) - [Silencer thread G 1A SKU: 86608800](https://maedler.in/product/silencer-thread-g-1a-sku-86608800/): A G1 A B [mm] 16 C [mm] 6,0 Ø D [mm] 31,0 Ø E [mm] 25,0 F [mm] 82 SW [mm] 41 Veniting Noise at 0,07 MPa db(A) 93 Vening Noise at 0.6 MPa db(A) 100 Weight [g] 200 CATALOG PRODUCT PAGE CAD FILES (download) - [Silencer thread G 3/4A SKU: 86606800](https://maedler.in/product/silencer-thread-g-3-4a-sku-86606800/): A G3/4 A B [mm] 14 C [mm] 6,0 Ø D [mm] 26,0 Ø E [mm] 19,0 F [mm] 80 SW [mm] 32 Veniting Noise at 0,07 MPa db(A) 87 Vening Noise at 0.6 MPa db(A) 96 Weight [g] 130 CATALOG PRODUCT PAGE CAD FILES (download) - [Silencer thread G 1/2A SKU: 86604800](https://maedler.in/product/silencer-thread-g-1-2a-sku-86604800/): A G1/2 A B [mm] 12 C [mm] 5,5 Ø D [mm] 20,0 Ø E [mm] 14,8 F [mm] 56 SW [mm] 27 Veniting Noise at 0,07 MPa db(A) 75 Vening Noise at 0.6 MPa db(A) 88 Weight [g] 70 CATALOG PRODUCT PAGE CAD FILES (download) - [Silencer thread G 3/8A SKU: 86603800](https://maedler.in/product/silencer-thread-g-3-8a-sku-86603800/): A G3/8 A B [mm] 10 C [mm] 5,0 Ø D [mm] 17,0 Ø E [mm] 12,0 F [mm] 44 SW [mm] 22 Veniting Noise at 0,07 MPa db(A) 75 Vening Noise at 0.6 MPa db(A) 84 Weight [g] 45 CATALOG PRODUCT PAGE CAD FILES (download) - [Silencer thread G 1/4A SKU: 86602800](https://maedler.in/product/silencer-thread-g-1-4a-sku-86602800/): A G1/4 A B [mm] 8 C [mm] 5,0 Ø D [mm] 12,0 Ø E [mm] 8,5 F [mm] 33 SW [mm] 17 Veniting Noise at 0,07 MPa db(A) 68 Vening Noise at 0.6 MPa db(A) 78 Weight [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Silencer thread G 1/8A SKU: 86601800](https://maedler.in/product/silencer-thread-g-1-8a-sku-86601800/): A G1/8 A B [mm] 6 C [mm] 5,0 Ø D [mm] 9,5 Ø E [mm] 6,0 F [mm] 24 SW [mm] 13 Veniting Noise at 0,07 MPa db(A) 66 Vening Noise at 0.6 MPa db(A) 75 Weight [g] 1 CATALOG PRODUCT PAGE CAD FILES (download) - [Silencer thread M5 SKU: 86600500](https://maedler.in/product/silencer-thread-m5-sku-86600500/): A M5 B [mm] 5 C [mm] 5,0 Ø D [mm] 5,0 Ø E [mm] 2,5 F [mm] 2 SW [mm] 7 Veniting Noise at 0,07 MPa db(A) Vening Noise at 0.6 MPa db(A) 70 Weight [g] 4 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug with sealing ring thread G1A SKU: 86590088](https://maedler.in/product/plug-with-sealing-ring-thread-g1a-sku-86590088/): A G1 A C [mm] 17,0 G [mm] 12,0 SW [mm] 40 Weight [g] 190 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug with sealing ring thread G3/4A SKU: 86590068](https://maedler.in/product/plug-with-sealing-ring-thread-g3-4a-sku-86590068/): A G3/4 A C [mm] 16,0 G [mm] 11,0 SW [mm] 30 Weight [g] 49 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug with sealing ring thread G1/2A SKU: 86590048](https://maedler.in/product/plug-with-sealing-ring-thread-g1-2a-sku-86590048/): A G1/2 A C [mm] 14,5 G [mm] 10,0 SW [mm] 24 Weight [g] 27 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug with sealing ring thread G3/8A SKU: 86590038](https://maedler.in/product/plug-with-sealing-ring-thread-g3-8a-sku-86590038/): A G3/8 A C [mm] 13,5 G [mm] 9,5 SW [mm] 19 Weight [g] 20 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug with sealing ring thread G1/4A SKU: 86590028](https://maedler.in/product/plug-with-sealing-ring-thread-g1-4a-sku-86590028/): A G1/4 A C [mm] 13,0 G [mm] 9,0 SW [mm] 17 Weight [g] 13 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug with sealing ring thread G1/8A SKU: 86590018](https://maedler.in/product/plug-with-sealing-ring-thread-g1-8a-sku-86590018/): A G1/8 A C [mm] 10 G [mm] 6,5 SW [mm] 14 Weight [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Plug with sealing ring thread M5 SKU: 86590005](https://maedler.in/product/plug-with-sealing-ring-thread-m5-sku-86590005/): A M5 C [mm] 8,0 G [mm] 4,5 SW [mm] 8 Weight [g] 2 CATALOG PRODUCT PAGE CAD FILES (download) - [None-return valve tube outer diameter 12mm SKU: 86580012](https://maedler.in/product/none-return-valve-tube-outer-diameter-12mm-sku-86580012/): Ø A [mm] 12 C [mm] 88,5 Ø K [mm] 22 Flow at 0.6 MPa Operating Pressure 1,87 (2814 l/min) Weight [g] 64 CATALOG PRODUCT PAGE CAD FILES (download) - [None-return valve tube outer diameter 10mm SKU: 86580010](https://maedler.in/product/none-return-valve-tube-outer-diameter-10mm-sku-86580010/): Ø A [mm] 10 C [mm] 77,5 Ø K [mm] 20 Flow at 0.6 MPa Operating Pressure 1,26 (1890 l/min) Weight [g] 48 CATALOG PRODUCT PAGE CAD FILES (download) - [None-return valve tube outer diameter 8mm SKU: 86580008](https://maedler.in/product/none-return-valve-tube-outer-diameter-8mm-sku-86580008/): Ø A [mm] 8 C [mm] 61,0 Ø K [mm] 15 Flow at 0.6 MPa Operating Pressure 0,89 (1344 l/min) Weight [g] 22 CATALOG PRODUCT PAGE CAD FILES (download) - [None-return valve tube outer diameter 6mm SKU: 86580006](https://maedler.in/product/none-return-valve-tube-outer-diameter-6mm-sku-86580006/): Ø A [mm] 6 C [mm] 56,5 Ø K [mm] 13 Flow at 0.6 MPa Operating Pressure 0,44 (659,4 l/min) Weight [g] 16 CATALOG PRODUCT PAGE CAD FILES (download) - [None-return valve tube outer diameter 4mm SKU: 86580004](https://maedler.in/product/none-return-valve-tube-outer-diameter-4mm-sku-86580004/): Ø A [mm] 4 C [mm] 49,0 Ø K [mm] 11 Flow at 0.6 MPa Operating Pressure 0,11 (159,6 l/min) Weight [g] 10 CATALOG PRODUCT PAGE CAD FILES (download) - [Quick exhaust valve thread G1/2 SKU: 86554800](https://maedler.in/product/quick-exhaust-valve-thread-g1-2-sku-86554800/): A G1/2 Ø B [mm] 30 D [mm] 40 F [mm] 15,5 G [mm] 4,0 H [mm] 73,5 Ø J [mm] 46 K [mm] 48,0 SW1 [mm] 30 SW2 46 KvValue 12 6,14 KvValue 23 6,84 Flow (m3/h) 12 554,4 Flow (m3/h) 23 617,4 Weight [g] 190 CATALOG PRODUCT PAGE CAD FILES (download) - [Quick exhaust valve thread G3/8 SKU: 86553800](https://maedler.in/product/quick-exhaust-valve-thread-g3-8-sku-86553800/): A G3/8 Ø B [mm] 30 D [mm] 40 F [mm] 15,5 G [mm] 4,0 H [mm] 73,5 Ø J [mm] 46 K [mm] 48,0 SW1 [mm] 30 SW2 46 KvValue 12 4,47 KvValue 23 5,02 Flow (m3/h) 12 403,2 Flow (m3/h) 23 453,6 Weight [g] 210 CATALOG PRODUCT PAGE CAD FILES (download) - [Quick exhaust valve thread G1/4 SKU: 86552800](https://maedler.in/product/quick-exhaust-valve-thread-g1-4-sku-86552800/): A G1/4 Ø B [mm] 19 D [mm] 28 F [mm] 15,3 G [mm] 3,5 H [mm] 53,0 Ø J [mm] 29 K [mm] 35,5 SW1 [mm] 19 SW2 30 KvValue 12 2,23 KvValue 23 2,46 Flow (m3/h) 12 201,6 Flow (m3/h) 23 221,8 Weight [g] 130 CATALOG PRODUCT PAGE CAD FILES (download) - [Quick exhaust valve thread G1/8 SKU: 86551800](https://maedler.in/product/quick-exhaust-valve-thread-g1-8-sku-86551800/): A G1/8 Ø B [mm] 19 D [mm] 28 F [mm] 15,3 G [mm] 3,5 H [mm] 53,0 Ø J [mm] 29 K [mm] 35,5 SW1 [mm] 19 SW2 30 KvValue 12 1,06 KvValue 23 1,23 Flow (m3/h) 12 95,8 Flow (m3/h) 23 110,9 Weight [g] 150 CATALOG PRODUCT PAGE CAD FILES (download) - [Block form flow regulator uni-directional thread G1/2 SKU: 86544800](https://maedler.in/product/block-form-flow-regulator-uni-directional-thread-g1-2-sku-86544800/): A G1/2 A B [mm] 65 C [mm] 36,0 D [mm] 82,0 E [mm] – F [mm] 30,5 G [mm] 50 H [mm] 6,5 J [mm] 30 K [mm] 15,0 L M20x1 M (SW) [mm] 14 N [mm] 24 P [mm] 32,5 Panel Bore [mm] 20,5 Max. Panel Thickness [mm] 4 Weight [g] 186 CATALOG […] - [Block form flow regulator uni-directional thread G3/8 SKU: 86543800](https://maedler.in/product/block-form-flow-regulator-uni-directional-thread-g3-8-sku-86543800/): A G3/8 A B [mm] 58 C [mm] 32,5 D [mm] 78,5 E [mm] – F [mm] 27,0 G [mm] 43 H [mm] 6,5 J [mm] 28 K [mm] 13,0 L M20x1 M (SW) [mm] 14 N [mm] 24 P [mm] 29,0 Panel Bore [mm] 20,5 Max. Panel Thickness [mm] 4 Weight [g] 153 CATALOG […] - [Block form flow regulator uni-directional thread G1/4 SKU: 86542800](https://maedler.in/product/block-form-flow-regulator-uni-directional-thread-g1-4-sku-86542800/): A G1/4 A B [mm] 45 C [mm] 25,5 D [mm] 61,5 E [mm] – F [mm] 21,0 G [mm] 32 H [mm] 4,5 J [mm] 19 K [mm] 9,5 L M14x1 M (SW) [mm] 10 N [mm] 17 P [mm] 22,5 Panel Bore [mm] 14,5 Max. Panel Thickness [mm] 4 Weight [g] 115 CATALOG […] - [Block form flow regulator uni-directional thread G1/8 SKU: 86541800](https://maedler.in/product/block-form-flow-regulator-uni-directional-thread-g1-8-sku-86541800/): A G1/8 A B [mm] 34 C [mm] 20,0 D [mm] 51,0 E [mm] – F [mm] 16,5 G [mm] 24 H [mm] 4,5 J [mm] 16 K [mm] 8,0 L M12x1 M (SW) [mm] 10 N [mm] 14 P [mm] 17,0 Panel Bore [mm] 12,5 Max. Panel Thickness [mm] 4 Weight [g] 65 CATALOG […] - [Block form flow regulator uni-directional thread M5 SKU: 86540500](https://maedler.in/product/block-form-flow-regulator-uni-directional-thread-m5-sku-86540500/): A M5 B [mm] 25 C [mm] 15,0 D [mm] 45,0 E [mm] 6,5 F [mm] 12,0 G [mm] 18 H [mm] 4,5 J [mm] 12 K [mm] 5,5 L M10x0,75 M (SW) [mm] 8 N [mm] 12 P [mm] 12,5 Panel Bore [mm] 10,5 Max. Panel Thickness [mm] 4 Weight [g] 12 CATALOG PRODUCT […] - [Exhaust port filter thread G1A SKU: 86531518](https://maedler.in/product/exhaust-port-filter-thread-g1a-sku-86531518/): A G1 A B [mm] 15,0 C [mm] 35 D [mm] 19 SW [mm] 47 Flow m3/h 138,6 Weight [g] 91 CATALOG PRODUCT PAGE CAD FILES (download) - [Exhaust port filter thread G3/4A SKU: 86531516](https://maedler.in/product/exhaust-port-filter-thread-g3-4a-sku-86531516/): A G3/4 A B [mm] 14,0 C [mm] 31 D [mm] 16 SW [mm] 42 Flow m3/h 98,3 Weight [g] 50 CATALOG PRODUCT PAGE CAD FILES (download) - [Exhaust port filter thread G1/2A SKU: 86531514](https://maedler.in/product/exhaust-port-filter-thread-g1-2a-sku-86531514/): A G1/2 A B [mm] 10,5 C [mm] 25 D [mm] 13 SW [mm] 30 Flow m3/h 37,8 Weight [g] 30 CATALOG PRODUCT PAGE CAD FILES (download) - [Exhaust port filter thread G1/4A SKU: 86531512](https://maedler.in/product/exhaust-port-filter-thread-g1-4a-sku-86531512/): A G1/4 A B [mm] 8,0 C [mm] 22 D [mm] 10 SW [mm] 23 Flow m3/h 27,7 Weight [g] 18 CATALOG PRODUCT PAGE CAD FILES (download) - [Exhaust port filter thread G1/8A SKU: 86531511](https://maedler.in/product/exhaust-port-filter-thread-g1-8a-sku-86531511/): A G1/8 A B [mm] 6,0 C [mm] 16 D [mm] 8 SW [mm] 15 Flow m3/h 11,3 Weight [g] 6 CATALOG PRODUCT PAGE CAD FILES (download) - [Hollow bolt with sealing rings thread G3/8A SKU: 86470038](https://maedler.in/product/hollow-bolt-with-sealing-rings-thread-g3-8a-sku-86470038/): B G3/8 A D1 [mm] 41,0 SW [mm] 22 Ø S [mm] 10,0 Weight [g] 60 CATALOG PRODUCT PAGE CAD FILES (download) - [Hollow bolt with sealing rings thread G1/4A SKU: 86470028](https://maedler.in/product/hollow-bolt-with-sealing-rings-thread-g1-4a-sku-86470028/): B G 1/4 A D1 [mm] 31,5 SW [mm] 17 Ø S [mm] 8,5 Weight [g] 25 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane timing belt T10 width 50mm Lw 1240mm 124 teeth 50 T10/1240 SKU: 16489300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1240mm-124-teeth-50-t10-1240-sku-16489300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1210mm 121 teeth 50 T10/1210 SKU: 16489200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1210mm-121-teeth-50-t10-1210-sku-16489200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1150mm 115 teeth 50 T10/1150 SKU: 16489100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1150mm-115-teeth-50-t10-1150-sku-16489100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1140mm 114 teeth 50 T10/1140 SKU: 16489000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1140mm-114-teeth-50-t10-1140-sku-16489000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1110mm 111 teeth 50 T10/1110 SKU: 16488900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1110mm-111-teeth-50-t10-1110-sku-16488900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1080mm 108 teeth 50 T10/1080 SKU: 16488800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1080mm-108-teeth-50-t10-1080-sku-16488800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1010mm 101 teeth 50 T10/1010 SKU: 16488700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1010mm-101-teeth-50-t10-1010-sku-16488700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 980mm 98 teeth 50 T10/980 SKU: 16488600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-980mm-98-teeth-50-t10-980-sku-16488600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 960mm 96 teeth 50 T10/960 SKU: 16488400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-960mm-96-teeth-50-t10-960-sku-16488400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 920mm 92 teeth 50 T10/920 SKU: 16488300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-920mm-92-teeth-50-t10-920-sku-16488300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 900mm 90 teeth 50 T10/900 SKU: 16488200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-900mm-90-teeth-50-t10-900-sku-16488200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 890mm 89 teeth 50 T10/890 SKU: 16488100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-890mm-89-teeth-50-t10-890-sku-16488100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 880mm 88 teeth 50 T10/880 SKU: 16488000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-880mm-88-teeth-50-t10-880-sku-16488000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 840mm 84 teeth 50 T10/840 SKU: 16487900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-840mm-84-teeth-50-t10-840-sku-16487900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 810mm 81 teeth 50 T10/810 SKU: 16487800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-810mm-81-teeth-50-t10-810-sku-16487800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 780mm 78 teeth 50 T10/780 SKU: 16487700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-780mm-78-teeth-50-t10-780-sku-16487700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 750mm 75 teeth 50 T10/750 SKU: 16487600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-750mm-75-teeth-50-t10-750-sku-16487600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 720mm 72 teeth 50 T10/720 SKU: 16487500](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-720mm-72-teeth-50-t10-720-sku-16487500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 700mm 70 teeth 50 T10/700 SKU: 16487400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-700mm-70-teeth-50-t10-700-sku-16487400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 690mm 69 teeth 50 T10/690 SKU: 16487300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-690mm-69-teeth-50-t10-690-sku-16487300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 660mm 66 teeth 50 T10/660 SKU: 16487200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-660mm-66-teeth-50-t10-660-sku-16487200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 630mm 63 teeth 50 T10/630 SKU: 16487100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-630mm-63-teeth-50-t10-630-sku-16487100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 610mm 61 teeth 50 T10/610 SKU: 16487000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-610mm-61-teeth-50-t10-610-sku-16487000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 560mm 56 teeth 50 T10/560 SKU: 16486900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-560mm-56-teeth-50-t10-560-sku-16486900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 530mm 53 teeth 50 T10/530 SKU: 16486800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-530mm-53-teeth-50-t10-530-sku-16486800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 500mm 50 teeth 50 T10/500 SKU: 16486700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-500mm-50-teeth-50-t10-500-sku-16486700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 450mm 45 teeth 50 T10/450 SKU: 16486600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-450mm-45-teeth-50-t10-450-sku-16486600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 440mm 44 teeth 50 T10/440 SKU: 16486500](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-440mm-44-teeth-50-t10-440-sku-16486500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 410mm 41 teeth 50 T10/410 SKU: 16486400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-410mm-41-teeth-50-t10-410-sku-16486400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 400mm 40 teeth 50 T10/400 SKU: 16486300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-400mm-40-teeth-50-t10-400-sku-16486300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 370mm 37 teeth 50 T10/370 SKU: 16486200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-370mm-37-teeth-50-t10-370-sku-16486200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm 50T10 open length PAZ = Polyamide fabric on tooth side SKU: 16486001](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-50t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16486001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 50mm 50 T10 open length with tensile members from steel packed 2 x 25mm SKU: 16486000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-50-t10-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16486000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T10 width 40mm Lw 2250mm 225 teeth 40 T10/2250 SKU: 16485551](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-2250mm-225-teeth-40-t10-2250-sku-16485551/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1960mm 196 teeth 40 T10/1960 SKU: 16485550](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1960mm-196-teeth-40-t10-1960-sku-16485550/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1880mm 188 teeth 40 T10/1880 SKU: 16485549](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1880mm-188-teeth-40-t10-1880-sku-16485549/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1780mm 178 teeth 40 T10/1780 SKU: 16485548](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1780mm-178-teeth-40-t10-1780-sku-16485548/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1750mm 175 teeth 40 T10/1750 SKU: 16485547](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1750mm-175-teeth-40-t10-1750-sku-16485547/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1610mm 161 teeth 40 T10/1610 SKU: 16485546](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1610mm-161-teeth-40-t10-1610-sku-16485546/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1560mm 156 teeth 40 T10/1560 SKU: 16485545](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1560mm-156-teeth-40-t10-1560-sku-16485545/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1500mm 150 teeth 40 T10/1500 SKU: 16485544](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1500mm-150-teeth-40-t10-1500-sku-16485544/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1460mm 146 teeth 40 T10/1460 SKU: 16485543](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1460mm-146-teeth-40-t10-1460-sku-16485543/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1450mm 145 teeth 40 T10/1450 SKU: 16485542](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1450mm-145-teeth-40-t10-1450-sku-16485542/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1440mm 144 teeth 40 T10/1440 SKU: 16485541](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1440mm-144-teeth-40-t10-1440-sku-16485541/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1420mm 142 teeth 40 T10/1420 SKU: 16485540](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1420mm-142-teeth-40-t10-1420-sku-16485540/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1400mm 140 teeth 40 T10/1400 SKU: 16485539](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1400mm-140-teeth-40-t10-1400-sku-16485539/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1390mm 139 teeth 40 T10/1390 SKU: 16485538](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1390mm-139-teeth-40-t10-1390-sku-16485538/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1350mm 135 teeth 40 T10/1350 SKU: 16485537](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1350mm-135-teeth-40-t10-1350-sku-16485537/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1320mm 132 teeth 40 T10/1320 SKU: 16485536](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1320mm-132-teeth-40-t10-1320-sku-16485536/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1300mm 130 teeth 40 T10/1300 SKU: 16485535](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1300mm-130-teeth-40-t10-1300-sku-16485535/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1250mm 125 teeth 40 T10/1250 SKU: 16485534](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1250mm-125-teeth-40-t10-1250-sku-16485534/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1240mm 124 teeth 40 T10/1240 SKU: 16485533](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1240mm-124-teeth-40-t10-1240-sku-16485533/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1210mm 121 teeth 40 T10/1210 SKU: 16485532](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1210mm-121-teeth-40-t10-1210-sku-16485532/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1150mm 115 teeth 40 T10/1150 SKU: 16485531](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1150mm-115-teeth-40-t10-1150-sku-16485531/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1110mm 111 teeth 40 T10/1110 SKU: 16485529](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1110mm-111-teeth-40-t10-1110-sku-16485529/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1080mm 108 teeth 40 T10/1080 SKU: 16485528](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1080mm-108-teeth-40-t10-1080-sku-16485528/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 1010mm 101 teeth 40 T10/1010 SKU: 16485527](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-1010mm-101-teeth-40-t10-1010-sku-16485527/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 980mm 98 teeth 40 T10/980 SKU: 16485526](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-980mm-98-teeth-40-t10-980-sku-16485526/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 960mm 96 teeth 40 T10/960 SKU: 16485524](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-960mm-96-teeth-40-t10-960-sku-16485524/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 920mm 92 teeth 40 T10/920 SKU: 16485523](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-920mm-92-teeth-40-t10-920-sku-16485523/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 900mm 90 teeth 40 T10/900 SKU: 16485522](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-900mm-90-teeth-40-t10-900-sku-16485522/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 880mm 88 teeth 40 T10/880 SKU: 16485520](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-880mm-88-teeth-40-t10-880-sku-16485520/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 840mm 84 teeth 40 T10/840 SKU: 16485519](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-840mm-84-teeth-40-t10-840-sku-16485519/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 810mm 81 teeth 40 T10/810 SKU: 16485518](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-810mm-81-teeth-40-t10-810-sku-16485518/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 780mm 78 teeth 40 T10/780 SKU: 16485517](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-780mm-78-teeth-40-t10-780-sku-16485517/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 750mm 75 teeth 40 T10/750 SKU: 16485516](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-750mm-75-teeth-40-t10-750-sku-16485516/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 720mm 72 teeth 40 T10/720 SKU: 16485515](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-720mm-72-teeth-40-t10-720-sku-16485515/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 700mm 70 teeth 40 T10/700 SKU: 16485514](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-700mm-70-teeth-40-t10-700-sku-16485514/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 660mm 66 teeth 40 T10/660 SKU: 16485512](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-660mm-66-teeth-40-t10-660-sku-16485512/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 630mm 63 teeth 40 T10/630 SKU: 16485511](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-630mm-63-teeth-40-t10-630-sku-16485511/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 610mm 61 teeth 40 T10/610 SKU: 16485510](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-610mm-61-teeth-40-t10-610-sku-16485510/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 560mm 56 teeth 40 T10/560 SKU: 16485509](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-560mm-56-teeth-40-t10-560-sku-16485509/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 530mm 53 teeth 40 T10/530 SKU: 16485508](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-530mm-53-teeth-40-t10-530-sku-16485508/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 500mm 50 teeth 40 T10/500 SKU: 16485507](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-500mm-50-teeth-40-t10-500-sku-16485507/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 450mm 45 teeth 40 T10/450 SKU: 16485506](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-450mm-45-teeth-40-t10-450-sku-16485506/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 410mm 41 teeth 40 T10/410 SKU: 16485504](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-410mm-41-teeth-40-t10-410-sku-16485504/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm Lw 370mm 37 teeth 40 T10/370 SKU: 16485502](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-lw-370mm-37-teeth-40-t10-370-sku-16485502/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 40mm 40T10 open length PAZ = Polyamide fabric on tooth side SKU: 16485501](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-40t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16485501/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 40mm 40 T10 open length with tensile members from steel SKU: 16485500](https://maedler.in/product/polyurethane-timing-belt-t10-width-40mm-40-t10-open-length-with-tensile-members-from-steel-sku-16485500/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T10 width 32mm Lw 2250mm 225 teeth 32 T10/2250 SKU: 16485100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-2250mm-225-teeth-32-t10-2250-sku-16485100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1960mm 196 teeth 32 T10/1960 SKU: 16485000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1960mm-196-teeth-32-t10-1960-sku-16485000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1880mm 188 teeth 32 T10/1880 SKU: 16484900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1880mm-188-teeth-32-t10-1880-sku-16484900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1780mm 178 teeth 32 T10/1780 SKU: 16484800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1780mm-178-teeth-32-t10-1780-sku-16484800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1750mm 175 teeth 32 T10/1750 SKU: 16484700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1750mm-175-teeth-32-t10-1750-sku-16484700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1610mm 161 teeth 32 T10/1610 SKU: 16484600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1610mm-161-teeth-32-t10-1610-sku-16484600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1560mm 156 teeth 32 T10/1560 SKU: 16484500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1560mm-156-teeth-32-t10-1560-sku-16484500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1500mm 150 teeth 32 T10/1500 SKU: 16484400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1500mm-150-teeth-32-t10-1500-sku-16484400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1460mm 146 teeth 32 T10/1460 SKU: 16484300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1460mm-146-teeth-32-t10-1460-sku-16484300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1450mm 145 teeth 32 T10/1450 SKU: 16484200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1450mm-145-teeth-32-t10-1450-sku-16484200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1440mm 144 teeth 32 T10/1440 SKU: 16484100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1440mm-144-teeth-32-t10-1440-sku-16484100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1420mm 142 teeth 32 T10/1420 SKU: 16484000](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1420mm-142-teeth-32-t10-1420-sku-16484000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1400mm 140 teeth 32 T10/1400 SKU: 16483900](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1400mm-140-teeth-32-t10-1400-sku-16483900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1390mm 139 teeth 32 T10/1390 SKU: 16483800](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1390mm-139-teeth-32-t10-1390-sku-16483800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1350mm 135 teeth 32 T10/1350 SKU: 16483700](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1350mm-135-teeth-32-t10-1350-sku-16483700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1320mm 132 teeth 32 T10/1320 SKU: 16483600](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1320mm-132-teeth-32-t10-1320-sku-16483600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1300mm 130 teeth 32 T10/1300 SKU: 16483500](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1300mm-130-teeth-32-t10-1300-sku-16483500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1250mm 125 teeth 32 T10/1250 SKU: 16483400](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1250mm-125-teeth-32-t10-1250-sku-16483400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1240mm 124 teeth 32 T10/1240 SKU: 16483300](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1240mm-124-teeth-32-t10-1240-sku-16483300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1210mm 121 teeth 32 T10/1210 SKU: 16483200](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1210mm-121-teeth-32-t10-1210-sku-16483200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 32mm Lw 1150mm 115 teeth 32 T10/1150 SKU: 16483100](https://maedler.in/product/polyurethane-timing-belt-t10-width-32mm-lw-1150mm-115-teeth-32-t10-1150-sku-16483100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [5/2-directional control valve solenoid actuated Norgren V60A517A-A213L G1/8 Voltage 24 V DC SKU: 903015-20279](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a213l-g1-8-voltage-24-v-dc-sku-903015-20279/): ManufacturePartnumber V60A517A-A213L Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A517A-A213J G1/8 Voltage 24 V DC SKU: 903015-20278](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a213j-g1-8-voltage-24-v-dc-sku-903015-20278/): ManufacturePartnumber V60A517A-A213J Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A517A-A212J G1/8 Voltage 12 V DC SKU: 903015-20277](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a212j-g1-8-voltage-12-v-dc-sku-903015-20277/): ManufacturePartnumber V60A517A-A212J Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A319L G1/8 Voltage 220/240 V AC SKU: 903015-20276](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a319l-g1-8-voltage-220-240-v-ac-sku-903015-20276/): ManufacturePartnumber V60A513A-A319L Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface L Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20275](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20275/): ManufacturePartnumber V60A513A-A319J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A318J G1/8 Voltage 110/120 V AC SKU: 903015-20274](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a318j-g1-8-voltage-110-120-v-ac-sku-903015-20274/): ManufacturePartnumber V60A513A-A318J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A314J G1/8 Voltage 24 V AC SKU: 903015-20273](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a314j-g1-8-voltage-24-v-ac-sku-903015-20273/): ManufacturePartnumber V60A513A-A314J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A313L G1/8 Voltage 24 V DC SKU: 903015-20272](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a313l-g1-8-voltage-24-v-dc-sku-903015-20272/): ManufacturePartnumber V60A513A-A313L Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A313J G1/8 Voltage 24 V DC SKU: 903015-20271](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a313j-g1-8-voltage-24-v-dc-sku-903015-20271/): ManufacturePartnumber V60A513A-A313J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A312J G1/8 Voltage 12 V DC SKU: 903015-20270](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a312j-g1-8-voltage-12-v-dc-sku-903015-20270/): ManufacturePartnumber V60A513A-A312J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A219L G1/8 Voltage 220/240 V AC (old product no. 85031812) SKU: 903015-20269](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a219l-g1-8-voltage-220-240-v-ac-old-product-no-85031812-sku-903015-20269/): ManufacturePartnumber V60A513A-A219L Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20268](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20268/): ManufacturePartnumber V60A513A-A219J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A218L G1/8 Voltage 110/120 V AC SKU: 903015-20267](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a218l-g1-8-voltage-110-120-v-ac-sku-903015-20267/): ManufacturePartnumber V60A513A-A218L Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A218J G1/8 Voltage 110/120 V AC SKU: 903015-20266](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a218j-g1-8-voltage-110-120-v-ac-sku-903015-20266/): ManufacturePartnumber V60A513A-A218J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A214L G1/8 Voltage 24 V AC SKU: 903015-20265](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a214l-g1-8-voltage-24-v-ac-sku-903015-20265/): ManufacturePartnumber V60A513A-A214L Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A214J G1/8 Voltage 24 V AC SKU: 903015-20264](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a214j-g1-8-voltage-24-v-ac-sku-903015-20264/): ManufacturePartnumber V60A513A-A214J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A213L G1/8 Voltage 24 V DC (old product no. 85031811) SKU: 903015-20263](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a213l-g1-8-voltage-24-v-dc-old-product-no-85031811-sku-903015-20263/): ManufacturePartnumber V60A513A-A213L Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A213J G1/8 Voltage 24 V DC SKU: 903015-20262](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a213j-g1-8-voltage-24-v-dc-sku-903015-20262/): ManufacturePartnumber V60A513A-A213J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A212L G1/8 Voltage 12 V DC SKU: 903015-20261](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a212l-g1-8-voltage-12-v-dc-sku-903015-20261/): ManufacturePartnumber V60A513A-A212L Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A513A-A212J G1/8 Voltage 12 V DC SKU: 903015-20260](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a513a-a212j-g1-8-voltage-12-v-dc-sku-903015-20260/): ManufacturePartnumber V60A513A-A212J Function – Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A319L G1/8 Voltage 220/240 V AC (old product no. 85041812) SKU: 903015-20259](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a319l-g1-8-voltage-220-240-v-ac-old-product-no-85041812-sku-903015-20259/): ManufacturePartnumber V60A511A-A319L Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface L Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20258](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20258/): ManufacturePartnumber V60A511A-A319J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A318J G1/8 Voltage 110/120 V AC SKU: 903015-20257](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a318j-g1-8-voltage-110-120-v-ac-sku-903015-20257/): ManufacturePartnumber V60A511A-A318J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A314J G1/8 Voltage 24 V AC SKU: 903015-20256](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a314j-g1-8-voltage-24-v-ac-sku-903015-20256/): ManufacturePartnumber V60A511A-A314J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A313L G1/8 Voltage 24 V DC (old product no. 85041811) SKU: 903015-20255](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a313l-g1-8-voltage-24-v-dc-old-product-no-85041811-sku-903015-20255/): ManufacturePartnumber V60A511A-A313L Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A313J G1/8 Voltage 24 V DC SKU: 903015-20254](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a313j-g1-8-voltage-24-v-dc-sku-903015-20254/): ManufacturePartnumber V60A511A-A313J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A312J G1/8 Voltage 12 V DC SKU: 903015-20253](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a312j-g1-8-voltage-12-v-dc-sku-903015-20253/): ManufacturePartnumber V60A511A-A312J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A219L G1/8 Voltage 220/240 V AC SKU: 903015-20252](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a219l-g1-8-voltage-220-240-v-ac-sku-903015-20252/): ManufacturePartnumber V60A511A-A219L Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20251](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20251/): ManufacturePartnumber V60A511A-A219J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A218J G1/8 Voltage 110/120 V AC SKU: 903015-20250](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a218j-g1-8-voltage-110-120-v-ac-sku-903015-20250/): ManufacturePartnumber V60A511A-A218J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A214J G1/8 Voltage 24 V AC SKU: 903015-20249](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a214j-g1-8-voltage-24-v-ac-sku-903015-20249/): ManufacturePartnumber V60A511A-A214J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A213L G1/8 Voltage 24 V DC SKU: 903015-20248](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a213l-g1-8-voltage-24-v-dc-sku-903015-20248/): ManufacturePartnumber V60A511A-A213L Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A213J G1/8 Voltage 24 V DC SKU: 903015-20247](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a213j-g1-8-voltage-24-v-dc-sku-903015-20247/): ManufacturePartnumber V60A511A-A213J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A511A-A212J G1/8 Voltage 12 V DC SKU: 903015-20246](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a511a-a212j-g1-8-voltage-12-v-dc-sku-903015-20246/): ManufacturePartnumber V60A511A-A212J Function – Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A423A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20245](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a423a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20245/): ManufacturePartnumber V60A423A-A319J Function NC Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A423A-A313J G1/8 Voltage 24 V DC SKU: 903015-20244](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a423a-a313j-g1-8-voltage-24-v-dc-sku-903015-20244/): ManufacturePartnumber V60A423A-A313J Function NC Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A423A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20243](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a423a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20243/): ManufacturePartnumber V60A423A-A219J Function NC Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A423A-A213L G1/8 Voltage 24 V DC SKU: 903015-20242](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a423a-a213l-g1-8-voltage-24-v-dc-sku-903015-20242/): ManufacturePartnumber V60A423A-A213L Function NC Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A423A-A213J G1/8 Voltage 24 V DC SKU: 903015-20241](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a423a-a213j-g1-8-voltage-24-v-dc-sku-903015-20241/): ManufacturePartnumber V60A423A-A213J Function NC Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A422A-A313J G1/8 Voltage 24 V DC SKU: 903015-20240](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a422a-a313j-g1-8-voltage-24-v-dc-sku-903015-20240/): ManufacturePartnumber V60A422A-A313J Function NC Actuation Sol/Sol External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 159,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,30 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A417A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20239](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a417a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20239/): ManufacturePartnumber V60A417A-A319J Function NC Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 125 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A417A-A313L G1/8 Voltage 24 V DC SKU: 903015-20237](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a417a-a313l-g1-8-voltage-24-v-dc-sku-903015-20237/): ManufacturePartnumber V60A417A-A313L Function NC Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 125 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A417A-A313J G1/8 Voltage 24 V DC SKU: 903015-20236](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a417a-a313j-g1-8-voltage-24-v-dc-sku-903015-20236/): ManufacturePartnumber V60A417A-A313J Function NC Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 125 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A417A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20235](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a417a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20235/): ManufacturePartnumber V60A417A-A219J Function NC Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 125 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A417A-A218J G1/8 Voltage 110/120 V AC SKU: 903015-20234](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a417a-a218j-g1-8-voltage-110-120-v-ac-sku-903015-20234/): ManufacturePartnumber V60A417A-A218J Function NC Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 125 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A417A-A213L G1/8 Voltage 24 V DC SKU: 903015-20233](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a417a-a213l-g1-8-voltage-24-v-dc-sku-903015-20233/): ManufacturePartnumber V60A417A-A213L Function NC Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 125 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A417A-A213J G1/8 Voltage 24 V DC SKU: 903015-20232](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a417a-a213j-g1-8-voltage-24-v-dc-sku-903015-20232/): ManufacturePartnumber V60A417A-A213J Function NC Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 125 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A417A-A212J G1/8 Voltage 12 V DC SKU: 903015-20231](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a417a-a212j-g1-8-voltage-12-v-dc-sku-903015-20231/): ManufacturePartnumber V60A417A-A212J Function NC Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 125 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20230](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20230/): ManufacturePartnumber V60A413A-A319J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A318J G1/8 Voltage 110/120 V AC SKU: 903015-20229](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a318j-g1-8-voltage-110-120-v-ac-sku-903015-20229/): ManufacturePartnumber V60A413A-A318J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A314J G1/8 Voltage 24 V AC SKU: 903015-20228](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a314j-g1-8-voltage-24-v-ac-sku-903015-20228/): ManufacturePartnumber V60A413A-A314J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A313L G1/8 Voltage 24 V DC SKU: 903015-20227](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a313l-g1-8-voltage-24-v-dc-sku-903015-20227/): ManufacturePartnumber V60A413A-A313L Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A313J G1/8 Voltage 24 V DC SKU: 903015-20226](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a313j-g1-8-voltage-24-v-dc-sku-903015-20226/): ManufacturePartnumber V60A413A-A313J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A312J G1/8 Voltage 12 V DC SKU: 903015-20225](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a312j-g1-8-voltage-12-v-dc-sku-903015-20225/): ManufacturePartnumber V60A413A-A312J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A219L G1/8 Voltage 220/240 V AC (old product no. 85011812) SKU: 903015-20224](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a219l-g1-8-voltage-220-240-v-ac-old-product-no-85011812-sku-903015-20224/): ManufacturePartnumber V60A413A-A219L Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20223](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20223/): ManufacturePartnumber V60A413A-A219J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A218J G1/8 Voltage 110/120 V AC SKU: 903015-20222](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a218j-g1-8-voltage-110-120-v-ac-sku-903015-20222/): ManufacturePartnumber V60A413A-A218J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A214L G1/8 Voltage 24 V AC SKU: 903015-20221](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a214l-g1-8-voltage-24-v-ac-sku-903015-20221/): ManufacturePartnumber V60A413A-A214L Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A214J G1/8 Voltage 24 V AC SKU: 903015-20220](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a214j-g1-8-voltage-24-v-ac-sku-903015-20220/): ManufacturePartnumber V60A413A-A214J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A213L G1/8 Voltage 24 V DC (old product no. 85011811) SKU: 903015-20219](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a213l-g1-8-voltage-24-v-dc-old-product-no-85011811-sku-903015-20219/): ManufacturePartnumber V60A413A-A213L Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A213J G1/8 Voltage 24 V DC SKU: 903015-20218](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a213j-g1-8-voltage-24-v-dc-sku-903015-20218/): ManufacturePartnumber V60A413A-A213J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A212L G1/8 Voltage 12 V DC SKU: 903015-20217](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a212l-g1-8-voltage-12-v-dc-sku-903015-20217/): ManufacturePartnumber V60A413A-A212L Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A413A-A212J G1/8 Voltage 12 V DC SKU: 903015-20216](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a413a-a212j-g1-8-voltage-12-v-dc-sku-903015-20216/): ManufacturePartnumber V60A413A-A212J Function NC Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A411A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20215](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a411a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20215/): ManufacturePartnumber V60A411A-A319J Function NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 159,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,30 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A411A-A318J G1/8 Voltage 110/120 V AC SKU: 903015-20214](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a411a-a318j-g1-8-voltage-110-120-v-ac-sku-903015-20214/): ManufacturePartnumber V60A411A-A318J Function NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 159,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,30 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A411A-A313L G1/8 Voltage 24 V DC SKU: 903015-20213](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a411a-a313l-g1-8-voltage-24-v-dc-sku-903015-20213/): ManufacturePartnumber V60A411A-A313L Function NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 159,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,30 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A411A-A313J G1/8 Voltage 24 V DC SKU: 903015-20212](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a411a-a313j-g1-8-voltage-24-v-dc-sku-903015-20212/): ManufacturePartnumber V60A411A-A313J Function NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 159,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,30 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A411A-A312L G1/8 Voltage 12 V DC SKU: 903015-20211](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a411a-a312l-g1-8-voltage-12-v-dc-sku-903015-20211/): ManufacturePartnumber V60A411A-A312L Function NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 159,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,30 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A411A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20210](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a411a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20210/): ManufacturePartnumber V60A411A-A219J Function NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 159,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,30 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A411A-A213J G1/8 Voltage 24 V DC SKU: 903015-20209](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a411a-a213j-g1-8-voltage-24-v-dc-sku-903015-20209/): ManufacturePartnumber V60A411A-A213J Function NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 159,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,30 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A323A-A313J G1/8 Voltage 24 V DC SKU: 903015-20208](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a323a-a313j-g1-8-voltage-24-v-dc-sku-903015-20208/): ManufacturePartnumber V60A323A-A313J Function NO Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A323A-A213J G1/8 Voltage 24 V DC SKU: 903015-20207](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a323a-a213j-g1-8-voltage-24-v-dc-sku-903015-20207/): ManufacturePartnumber V60A323A-A213J Function NO Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A317A-A213J G1/8 Voltage 24 V DC SKU: 903015-20206](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a317a-a213j-g1-8-voltage-24-v-dc-sku-903015-20206/): ManufacturePartnumber V60A317A-A213J Function NO Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 125 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A313A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20205](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a313a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20205/): ManufacturePartnumber V60A313A-A319J Function NO Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A313A-A313J G1/8 Voltage 24 V DC SKU: 903015-20204](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a313a-a313j-g1-8-voltage-24-v-dc-sku-903015-20204/): ManufacturePartnumber V60A313A-A313J Function NO Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A313A-A219L G1/8 Voltage 220/240 V AC SKU: 903015-20203](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a313a-a219l-g1-8-voltage-220-240-v-ac-sku-903015-20203/): ManufacturePartnumber V60A313A-A219L Function NO Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A313A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20202](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a313a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20202/): ManufacturePartnumber V60A313A-A219J Function NO Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A313A-A213L G1/8 Voltage 24 V DC SKU: 903015-20201](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a313a-a213l-g1-8-voltage-24-v-dc-sku-903015-20201/): ManufacturePartnumber V60A313A-A213L Function NO Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V60A313A-A213J G1/8 Voltage 24 V DC SKU: 903015-20200](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v60a313a-a213j-g1-8-voltage-24-v-dc-sku-903015-20200/): ManufacturePartnumber V60A313A-A213J Function NO Actuation Sol/air Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 116,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [Hose grommet for hose diameter 10mm SKU: 87031014](https://maedler.in/product/hose-grommet-for-hose-diameter-10mm-sku-87031014/): Thread [in.] R 1/4″ A [mm] 36 Hose Ø [mm] 10 SW [mm] 14 Weight [g] 19 CATALOG PRODUCT PAGE CAD FILES (download) - [Hose grommet for hose diameter 9mm SKU: 87030914](https://maedler.in/product/hose-grommet-for-hose-diameter-9mm-sku-87030914/): Thread [in.] R 1/4″ A [mm] 36 Hose Ø [mm] 9 SW [mm] 14 Weight [g] 15 CATALOG PRODUCT PAGE CAD FILES (download) - [Hose grommet for hose diameter 6mm SKU: 87030614](https://maedler.in/product/hose-grommet-for-hose-diameter-6mm-sku-87030614/): Thread [in.] R 1/4″ A [mm] 36 Hose Ø [mm] 6 SW [mm] 14 Weight [g] 15 CATALOG PRODUCT PAGE CAD FILES (download) - [Flexible hose, 13x20 SKU: 87021320](https://maedler.in/product/flexible-hose-13x20-sku-87021320/): Diameter inner/outer [mm] 13 x 20 Einsatzdruck at 20°C [0.1 MPa] 15 Max. Pressure at 20°C [0.1 MPa] 50 Max. Temperature [°C] 60 Weight g per Meter [g/m] 214 CATALOG PRODUCT PAGE CAD FILES (download) - [Flexible hose, 10x16 SKU: 87021016](https://maedler.in/product/flexible-hose-10x16-sku-87021016/): Diameter inner/outer [mm] 10 x 16 Einsatzdruck at 20°C [0.1 MPa] 15 Max. Pressure at 20°C [0.1 MPa] 50 Max. Temperature [°C] 60 Weight g per Meter [g/m] 147 CATALOG PRODUCT PAGE CAD FILES (download) - [Flexible hose, 9x15 SKU: 87020915](https://maedler.in/product/flexible-hose-9x15-sku-87020915/): Diameter inner/outer [mm] 9 x 15 Einsatzdruck at 20°C [0.1 MPa] 15 Max. Pressure at 20°C [0.1 MPa] 50 Max. Temperature [°C] 60 Weight g per Meter [g/m] 125 CATALOG PRODUCT PAGE CAD FILES (download) - [Flexible hose, 8x14 SKU: 87020814](https://maedler.in/product/flexible-hose-8x14-sku-87020814/): Diameter inner/outer [mm] 8 x 14 Einsatzdruck at 20°C [0.1 MPa] 15 Max. Pressure at 20°C [0.1 MPa] 50 Max. Temperature [°C] 60 Weight g per Meter [g/m] 124 CATALOG PRODUCT PAGE CAD FILES (download) - [Flexible hose, 6x12 SKU: 87020612](https://maedler.in/product/flexible-hose-6x12-sku-87020612/): Diameter inner/outer [mm] 6 x 12 Einsatzdruck at 20°C [0.1 MPa] 15 Max. Pressure at 20°C [0.1 MPa] 50 Max. Temperature [°C] 60 Weight g per Meter [g/m] 97 CATALOG PRODUCT PAGE CAD FILES (download) - [Spiral hose 8x12 length 0,72 - 8 mtr SKU: 87010808](https://maedler.in/product/spiral-hose-8x12-length-072-8-mtr-sku-87010808/): Ø I / A [mm] 8 x 12 Rigid Coupling [in.] G 3/8 Swivel Joint Coupler [in.] G 3/8 Max. Length [m] 8 Min. Length [m] 0,72 Ø Spirale [mm] 65 Weight [g] 947 CATALOG PRODUCT PAGE CAD FILES (download) - [Spiral hose 6,5x10 length 0,95 - 10 mtr SKU: 87010610](https://maedler.in/product/spiral-hose-65x10-length-095-10-mtr-sku-87010610/): Ø I / A [mm] 6,5 x 10 Rigid Coupling [in.] G 1/4 Swivel Joint Coupler [in.] G 1/4 Max. Length [m] 10 Min. Length [m] 0,95 Ø Spirale [mm] 52 Weight [g] 877 CATALOG PRODUCT PAGE CAD FILES (download) - [Spiral hose 6,5x10 length 0,8 - 8 mtr SKU: 87010608](https://maedler.in/product/spiral-hose-65x10-length-08-8-mtr-sku-87010608/): Ø I / A [mm] 6,5 x 10 Rigid Coupling [in.] G 1/4 Swivel Joint Coupler [in.] G 1/4 Max. Length [m] 8 Min. Length [m] 0,8 Ø Spirale [mm] 52 Weight [g] 711 CATALOG PRODUCT PAGE CAD FILES (download) - [Spiral hose 6,5x10 length 0,63 - 6 mtr SKU: 87010606](https://maedler.in/product/spiral-hose-65x10-length-063-6-mtr-sku-87010606/): Ø I / A [mm] 6,5 x 10 Rigid Coupling [in.] G 1/4 Swivel Joint Coupler [in.] G 1/4 Max. Length [m] 6 Min. Length [m] 0,63 Ø Spirale [mm] 52 Weight [g] 577 CATALOG PRODUCT PAGE CAD FILES (download) - [Spiral hose 6,5x10 length 0,4 - 4 mtr SKU: 87010604](https://maedler.in/product/spiral-hose-65x10-length-04-4-mtr-sku-87010604/): Ø I / A [mm] 6,5 x 10 Rigid Coupling [in.] G 1/4 Swivel Joint Coupler [in.] G 1/4 Max. Length [m] 4 Min. Length [m] 0,4 Ø Spirale [mm] 52 Weight [g] 413 CATALOG PRODUCT PAGE CAD FILES (download) - [Spiral hose 5x8 length 0,4 - 4 mtr SKU: 87010504](https://maedler.in/product/spiral-hose-5x8-length-04-4-mtr-sku-87010504/): Ø I / A [mm] 5 x 8 Rigid Coupling [in.] G 1/4 Swivel Joint Coupler [in.] G 1/4 Max. Length [m] 4 Min. Length [m] 0,4 Ø Spirale [mm] 42 Weight [g] 290 CATALOG PRODUCT PAGE CAD FILES (download) - [Spiral hose 5x8 length 0,18 - 2 mtr SKU: 87010502](https://maedler.in/product/spiral-hose-5x8-length-018-2-mtr-sku-87010502/): Ø I / A [mm] 5 x 8 Rigid Coupling [in.] G 1/4 Swivel Joint Coupler [in.] G 1/4 Max. Length [m] 2 Min. Length [m] 0,18 Ø Spirale [mm] 42 Weight [g] 189 CATALOG PRODUCT PAGE CAD FILES (download) - [Blowgun with silent nozzle SKU: 87000300](https://maedler.in/product/blowgun-with-silent-nozzle-sku-87000300/): A [mm] 185 Weight [g] 119 CATALOG PRODUCT PAGE CAD FILES (download) - [Blowgun with straight, scratchproof nozzle SKU: 87000200](https://maedler.in/product/blowgun-with-straight-scratchproof-nozzle-sku-87000200/): A [mm] 187 Weight [g] 119 CATALOG PRODUCT PAGE CAD FILES (download) - [Blowgun with metal nozzle SKU: 87000100](https://maedler.in/product/blowgun-with-metal-nozzle-sku-87000100/): A [mm] 235 Weight [g] 138 CATALOG PRODUCT PAGE CAD FILES (download) - [Tube cutter SKU: 86999999](https://maedler.in/product/tube-cutter-sku-86999999/): Weight [g] 25 CATALOG PRODUCT PAGE CAD FILES (download) - [Unmounting tool SKU: 86999990](https://maedler.in/product/unmounting-tool-sku-86999990/): Weight [g] 25 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane hose PU, color black outer diameter 12mm inner diameter, 8mm SKU: 86991203](https://maedler.in/product/polyurethane-hose-pu-color-black-outer-diameter-12mm-inner-diameter-8mm-sku-86991203/): Outer Ø [mm] 12 Inner Ø [mm] 8 Colour Schwarz Pressure max. [bar] 9 Bending Radius [min] 25 Weight per m [g] 100 CATALOG PRODUCT PAGE CAD FILES (download) - [Timing belt pulley AT5 material aluminium 17 teeth for belt width 16 mm 27 AT5/17-2 SKU: 16631700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-17-teeth-for-belt-width-16-mm-27-at5-17-2-sku-16631700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 16 teeth for belt width 16mm 27 AT5/16-2 SKU: 16631600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-16-teeth-for-belt-width-16mm-27-at5-16-2-sku-16631600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 15 teeth for belt width 16mm 27 AT5/15-2 SKU: 16631500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-15-teeth-for-belt-width-16mm-27-at5-15-2-sku-16631500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 14 teeth for belt width 16mm 27 AT5/14-2 SKU: 16631400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-14-teeth-for-belt-width-16mm-27-at5-14-2-sku-16631400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 12 teeth for belt width 16mm 27 AT5/12-2 SKU: 16631200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-12-teeth-for-belt-width-16mm-27-at5-12-2-sku-16631200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 96 teeth for belt width 10 mm 21 AT5/96-0 SKU: 16629600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-96-teeth-for-belt-width-10-mm-21-at5-96-0-sku-16629600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 84 teeth for belt width 10 mm 21 AT5/84-0 SKU: 16628400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-84-teeth-for-belt-width-10-mm-21-at5-84-0-sku-16628400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 72 teeth for belt width 10 mm 21 AT5/72-0 SKU: 16627200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-72-teeth-for-belt-width-10-mm-21-at5-72-0-sku-16627200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 60 teeth for belt width 10mm 21 AT5/60-0 SKU: 16626000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-60-teeth-for-belt-width-10mm-21-at5-60-0-sku-16626000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 48 teeth for belt width 10mm 21 AT5/48-0 SKU: 16624800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-48-teeth-for-belt-width-10mm-21-at5-48-0-sku-16624800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 44 teeth for belt width 10mm 21 AT5/44-0 SKU: 16624400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-44-teeth-for-belt-width-10mm-21-at5-44-0-sku-16624400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 42 teeth for belt width 10mm 21 AT5/42-2 SKU: 16624200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-42-teeth-for-belt-width-10mm-21-at5-42-2-sku-16624200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 40 teeth for belt width 10mm 21 AT5/40-2 SKU: 16624000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-40-teeth-for-belt-width-10mm-21-at5-40-2-sku-16624000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 36 teeth for belt width 10mm 21 AT5/36-2 SKU: 16623600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-36-teeth-for-belt-width-10mm-21-at5-36-2-sku-16623600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 32 teeth for belt width 10mm 21 AT5/32-2 SKU: 16623200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-32-teeth-for-belt-width-10mm-21-at5-32-2-sku-16623200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 30 teeth for belt width 10mm 21 AT5/30-2 SKU: 16623000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-30-teeth-for-belt-width-10mm-21-at5-30-2-sku-16623000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 28 teeth for belt width 10mm 21 AT5/28-2 SKU: 16622800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-28-teeth-for-belt-width-10mm-21-at5-28-2-sku-16622800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 27 teeth for belt width 10mm 21 AT5/27-2 SKU: 16622700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-27-teeth-for-belt-width-10mm-21-at5-27-2-sku-16622700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 26 teeth for belt width 10mm 21 AT5/26-2 SKU: 16622600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-26-teeth-for-belt-width-10mm-21-at5-26-2-sku-16622600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 25 teeth for belt width 10mm 21 AT5/25-2 SKU: 16622500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-25-teeth-for-belt-width-10mm-21-at5-25-2-sku-16622500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 24 teeth for belt width 10mm 21 AT5/24-2 SKU: 16622400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-24-teeth-for-belt-width-10mm-21-at5-24-2-sku-16622400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 22 teeth for belt width 10mm 21 AT5/22-2 SKU: 16622200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-22-teeth-for-belt-width-10mm-21-at5-22-2-sku-16622200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 20 teeth for belt width 10mm 21 AT5/20-2 SKU: 16622000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-20-teeth-for-belt-width-10mm-21-at5-20-2-sku-16622000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 19 teeth for belt width 10mm 21 AT5/19-2 SKU: 16621900](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-19-teeth-for-belt-width-10mm-21-at5-19-2-sku-16621900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 18 teeth for belt width 10mm 21 AT5/18-2 SKU: 16621800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-18-teeth-for-belt-width-10mm-21-at5-18-2-sku-16621800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 17 teeth for belt width 10 mm 21 AT5/17-2 SKU: 16621700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-17-teeth-for-belt-width-10-mm-21-at5-17-2-sku-16621700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 16 teeth for belt width 10mm 21 AT5/16-2 SKU: 16621600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-16-teeth-for-belt-width-10mm-21-at5-16-2-sku-16621600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 15 teeth for belt width 10mm 21 AT5/15-2 SKU: 16621500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-15-teeth-for-belt-width-10mm-21-at5-15-2-sku-16621500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 14 teeth for belt width 10mm 21 AT5/14-2 SKU: 16621400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-14-teeth-for-belt-width-10mm-21-at5-14-2-sku-16621400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 12 teeth for belt width 10mm 21 AT5/12-2 SKU: 16621200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-12-teeth-for-belt-width-10mm-21-at5-12-2-sku-16621200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Polyurethane timing belt T20 width 100mm 100 T20 open length with tensile members from steel packed 4 x 25mm SKU: 16580000](https://maedler.in/product/polyurethane-timing-belt-t20-width-100mm-100-t20-open-length-with-tensile-members-from-steel-packed-4-x-25mm-sku-16580000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T20 width 75mm 75 T20 open length with tensile members from steel packed 3 x 25mm SKU: 16570000](https://maedler.in/product/polyurethane-timing-belt-t20-width-75mm-75-t20-open-length-with-tensile-members-from-steel-packed-3-x-25mm-sku-16570000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt T20 width 50mm 50 T20 open length with tensile members from steel packed 2 x 25mm SKU: 16560000](https://maedler.in/product/polyurethane-timing-belt-t20-width-50mm-50-t20-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16560000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [timing bar T10 40 teeth length 160mm material 1.4305 SKU: 16499940](https://maedler.in/product/timing-bar-t10-40-teeth-length-160mm-material-1-4305-sku-16499940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 36 teeth length 160mm material 1.4305 SKU: 16499936](https://maedler.in/product/timing-bar-t10-36-teeth-length-160mm-material-1-4305-sku-16499936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 32 teeth length 160mm material 1.4305 SKU: 16499932](https://maedler.in/product/timing-bar-t10-32-teeth-length-160mm-material-1-4305-sku-16499932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 30 teeth length 160mm material 1.4305 SKU: 16499930](https://maedler.in/product/timing-bar-t10-30-teeth-length-160mm-material-1-4305-sku-16499930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 25 teeth length 160mm material 1.4305 SKU: 16499925](https://maedler.in/product/timing-bar-t10-25-teeth-length-160mm-material-1-4305-sku-16499925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 24 teeth length 160mm material 1.4305 SKU: 16499924](https://maedler.in/product/timing-bar-t10-24-teeth-length-160mm-material-1-4305-sku-16499924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 20 teeth length 160mm material 1.4305 SKU: 16499920](https://maedler.in/product/timing-bar-t10-20-teeth-length-160mm-material-1-4305-sku-16499920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 18 teeth length 160mm material 1.4305 SKU: 16499918](https://maedler.in/product/timing-bar-t10-18-teeth-length-160mm-material-1-4305-sku-16499918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 16 teeth length 160mm material 1.4305 SKU: 16499916](https://maedler.in/product/timing-bar-t10-16-teeth-length-160mm-material-1-4305-sku-16499916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 15 teeth length 160mm material 1.4305 SKU: 16499915](https://maedler.in/product/timing-bar-t10-15-teeth-length-160mm-material-1-4305-sku-16499915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar T10 12 teeth length 140mm material 1.4305 SKU: 16499912](https://maedler.in/product/timing-bar-t10-12-teeth-length-140mm-material-1-4305-sku-16499912/): Material: Stainless steel 1.4305 (AISI 303). - [Fixing plate for timing belts material aluminium T10 belt width 100mm SKU: 16499901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-100mm-sku-16499901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium T10 belt width 50mm SKU: 16499900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-50mm-sku-16499900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T10 width 50mm Lw 2250mm 225 teeth 50 T10/2250 SKU: 16499100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-2250mm-225-teeth-50-t10-2250-sku-16499100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1960mm 196 teeth 50 T10/1960 SKU: 16499000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1960mm-196-teeth-50-t10-1960-sku-16499000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1880mm 188 teeth 50 T10/1880 SKU: 16498900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1880mm-188-teeth-50-t10-1880-sku-16498900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1780mm 178 teeth 50 T10/1780 SKU: 16498800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1780mm-178-teeth-50-t10-1780-sku-16498800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1750mm 175 teeth 50 T10/1750 SKU: 16498700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1750mm-175-teeth-50-t10-1750-sku-16498700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1610mm 161 teeth 50 T10/1610 SKU: 16498600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1610mm-161-teeth-50-t10-1610-sku-16498600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1560mm 156 teeth 50 T10/1560 SKU: 16498500](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1560mm-156-teeth-50-t10-1560-sku-16498500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1500mm 150 teeth 50 T10/1500 SKU: 16498400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1500mm-150-teeth-50-t10-1500-sku-16498400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1460mm 146 teeth 50 T10/1460 SKU: 16498300](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1460mm-146-teeth-50-t10-1460-sku-16498300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1450mm 145 teeth 50 T10/1450 SKU: 16498200](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1450mm-145-teeth-50-t10-1450-sku-16498200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1440mm 144 teeth 50 T10/1440 SKU: 16498100](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1440mm-144-teeth-50-t10-1440-sku-16498100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1420mm 142 teeth 50 T10/1420 SKU: 16498000](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1420mm-142-teeth-50-t10-1420-sku-16498000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1400mm 140 teeth 50 T10/1400 SKU: 16497900](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1400mm-140-teeth-50-t10-1400-sku-16497900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [timing bar T10 72 teeth length 160mm material aluminium SKU: 16497200](https://maedler.in/product/timing-bar-t10-72-teeth-length-160mm-material-aluminium-sku-16497200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 60 teeth length 160mm material aluminium SKU: 16496000](https://maedler.in/product/timing-bar-t10-60-teeth-length-160mm-material-aluminium-sku-16496000/): Material: Aluminium similar EN AW2017A. - [timing bar T10 48 teeth length 160mm material aluminium SKU: 16494800](https://maedler.in/product/timing-bar-t10-48-teeth-length-160mm-material-aluminium-sku-16494800/): Material: Aluminium similar EN AW2017A. - [timing bar T10 45 teeth length 160mm material aluminium SKU: 16494500](https://maedler.in/product/timing-bar-t10-45-teeth-length-160mm-material-aluminium-sku-16494500/): Material: Aluminium similar EN AW2017A. - [timing bar T10 44 teeth length 160mm material aluminium SKU: 16494400](https://maedler.in/product/timing-bar-t10-44-teeth-length-160mm-material-aluminium-sku-16494400/): Material: Aluminium similar EN AW2017A. - [timing bar T10 42 teeth length 160mm material aluminium SKU: 16494200](https://maedler.in/product/timing-bar-t10-42-teeth-length-160mm-material-aluminium-sku-16494200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 40 teeth length 160mm material aluminium SKU: 16494000](https://maedler.in/product/timing-bar-t10-40-teeth-length-160mm-material-aluminium-sku-16494000/): Material: Aluminium similar EN AW2017A. - [timing bar T10 38 teeth length 160mm material aluminium SKU: 16493800](https://maedler.in/product/timing-bar-t10-38-teeth-length-160mm-material-aluminium-sku-16493800/): Material: Aluminium similar EN AW2017A. - [timing bar T10 36 teeth length 160mm material aluminium SKU: 16493600](https://maedler.in/product/timing-bar-t10-36-teeth-length-160mm-material-aluminium-sku-16493600/): Material: Aluminium similar EN AW2017A. - [timing bar T10 34 teeth length 160mm material aluminium SKU: 16493400](https://maedler.in/product/timing-bar-t10-34-teeth-length-160mm-material-aluminium-sku-16493400/): Material: Aluminium similar EN AW2017A. - [timing bar T10 32 teeth length 160mm material aluminium SKU: 16493200](https://maedler.in/product/timing-bar-t10-32-teeth-length-160mm-material-aluminium-sku-16493200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 30 teeth length 160mm material aluminium SKU: 16493000](https://maedler.in/product/timing-bar-t10-30-teeth-length-160mm-material-aluminium-sku-16493000/): Material: Aluminium similar EN AW2017A. - [timing bar T10 29 teeth length 160mm material aluminium SKU: 16492900](https://maedler.in/product/timing-bar-t10-29-teeth-length-160mm-material-aluminium-sku-16492900/): Material: Aluminium similar EN AW2017A. - [timing bar T10 28 teeth length 160mm material aluminium SKU: 16492800](https://maedler.in/product/timing-bar-t10-28-teeth-length-160mm-material-aluminium-sku-16492800/): Material: Aluminium similar EN AW2017A. - [timing bar T10 27 teeth length 160mm material aluminium SKU: 16492700](https://maedler.in/product/timing-bar-t10-27-teeth-length-160mm-material-aluminium-sku-16492700/): Material: Aluminium similar EN AW2017A. - [timing bar T10 26 teeth length 160mm material aluminium SKU: 16492600](https://maedler.in/product/timing-bar-t10-26-teeth-length-160mm-material-aluminium-sku-16492600/): Material: Aluminium similar EN AW2017A. - [timing bar T10 25 teeth length 160mm material aluminium SKU: 16492500](https://maedler.in/product/timing-bar-t10-25-teeth-length-160mm-material-aluminium-sku-16492500/): Material: Aluminium similar EN AW2017A. - [timing bar T10 24 teeth length 160mm material aluminium SKU: 16492400](https://maedler.in/product/timing-bar-t10-24-teeth-length-160mm-material-aluminium-sku-16492400/): Material: Aluminium similar EN AW2017A. - [timing bar T10 23 teeth length 160mm material aluminium SKU: 16492300](https://maedler.in/product/timing-bar-t10-23-teeth-length-160mm-material-aluminium-sku-16492300/): Material: Aluminium similar EN AW2017A. - [timing bar T10 22 teeth length 160mm material aluminium SKU: 16492200](https://maedler.in/product/timing-bar-t10-22-teeth-length-160mm-material-aluminium-sku-16492200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 21 teeth length 160mm material aluminium SKU: 16492100](https://maedler.in/product/timing-bar-t10-21-teeth-length-160mm-material-aluminium-sku-16492100/): Material: Aluminium similar EN AW2017A. - [timing bar T10 20 teeth length 160mm material aluminium SKU: 16492000](https://maedler.in/product/timing-bar-t10-20-teeth-length-160mm-material-aluminium-sku-16492000/): Material: Aluminium similar EN AW2017A. - [timing bar T10 19 teeth length 160mm material aluminium SKU: 16491900](https://maedler.in/product/timing-bar-t10-19-teeth-length-160mm-material-aluminium-sku-16491900/): Material: Aluminium similar EN AW2017A. - [timing bar T10 18 teeth length 160mm material aluminium SKU: 16491800](https://maedler.in/product/timing-bar-t10-18-teeth-length-160mm-material-aluminium-sku-16491800/): Material: Aluminium similar EN AW2017A. - [timing bar T10 17 teeth length 160mm material aluminium SKU: 16491700](https://maedler.in/product/timing-bar-t10-17-teeth-length-160mm-material-aluminium-sku-16491700/): Material: Aluminium similar EN AW2017A. - [timing bar T10 16 teeth length 160mm material aluminium SKU: 16491600](https://maedler.in/product/timing-bar-t10-16-teeth-length-160mm-material-aluminium-sku-16491600/): Material: Aluminium similar EN AW2017A. - [timing bar T10 15 teeth length 160mm material aluminium SKU: 16491500](https://maedler.in/product/timing-bar-t10-15-teeth-length-160mm-material-aluminium-sku-16491500/): Material: Aluminium similar EN AW2017A. - [timing bar T10 14 teeth length 160mm material aluminium SKU: 16491400](https://maedler.in/product/timing-bar-t10-14-teeth-length-160mm-material-aluminium-sku-16491400/): Material: Aluminium similar EN AW2017A. - [timing bar T10 13 teeth length 140mm material aluminium SKU: 16491300](https://maedler.in/product/timing-bar-t10-13-teeth-length-140mm-material-aluminium-sku-16491300/): Material: Aluminium similar EN AW2017A. - [timing bar T10 12 teeth length 140mm material aluminium SKU: 16491200](https://maedler.in/product/timing-bar-t10-12-teeth-length-140mm-material-aluminium-sku-16491200/): Material: Aluminium similar EN AW2017A. - [timing bar T10 11 teeth length 140mm material aluminium SKU: 16491100](https://maedler.in/product/timing-bar-t10-11-teeth-length-140mm-material-aluminium-sku-16491100/): Material: Aluminium similar EN AW2017A. - [timing bar T10 10 teeth length 140mm material aluminium SKU: 16491000](https://maedler.in/product/timing-bar-t10-10-teeth-length-140mm-material-aluminium-sku-16491000/): Material: Aluminium similar EN AW2017A. - [Polyurethane timing belt T10 width 100mm 100T10 open length PAZ = Polyamide fabric on tooth side SKU: 16490001](https://maedler.in/product/polyurethane-timing-belt-t10-width-100mm-100t10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16490001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt T10 width 100mm 100 T10 open length with tensile members from steel packed 4 x 25mm SKU: 16490000](https://maedler.in/product/polyurethane-timing-belt-t10-width-100mm-100-t10-open-length-with-tensile-members-from-steel-packed-4-x-25mm-sku-16490000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium T10 belt width 40mm SKU: 16489901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-40mm-sku-16489901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium T10 belt width 32mm SKU: 16489900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-t10-belt-width-32mm-sku-16489900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt T10 width 50mm Lw 1390mm 139 teeth 50 T10/1390 SKU: 16489800](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1390mm-139-teeth-50-t10-1390-sku-16489800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1350mm 135 teeth 50 T10/1350 SKU: 16489700](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1350mm-135-teeth-50-t10-1350-sku-16489700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1320mm 132 teeth 50 T10/1320 SKU: 16489600](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1320mm-132-teeth-50-t10-1320-sku-16489600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1300mm 130 teeth 50 T10/1300 SKU: 16489500](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1300mm-130-teeth-50-t10-1300-sku-16489500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt T10 width 50mm Lw 1250mm 125 teeth 50 T10/1250 SKU: 16489400](https://maedler.in/product/polyurethane-timing-belt-t10-width-50mm-lw-1250mm-125-teeth-50-t10-1250-sku-16489400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Classical shape with trapezoid teeth. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. T timing belts only run on T pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [3/2-directional control valve solenoid actuated Norgren V61B423A-A213J G1/4 Voltage 24 V DC SKU: 903015-20383](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b423a-a213j-g1-4-voltage-24-v-dc-sku-903015-20383/): ManufacturePartnumber V61B423A-A213J Function NC Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B422A-A313J G1/4 Voltage 24 V DC SKU: 903015-20382](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b422a-a313j-g1-4-voltage-24-v-dc-sku-903015-20382/): ManufacturePartnumber V61B422A-A313J Function NC Actuation Sol/Sol External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 179 Width [mm] 25 Height [mm] 40 Weight [kg] 0,38 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20380](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20380/): ManufacturePartnumber V61B417A-A319J Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A313L G1/4 Voltage 24 V DC SKU: 903015-20378](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a313l-g1-4-voltage-24-v-dc-sku-903015-20378/): ManufacturePartnumber V61B417A-A313L Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A313J G1/4 Voltage 24 V DC SKU: 903015-20377](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a313j-g1-4-voltage-24-v-dc-sku-903015-20377/): ManufacturePartnumber V61B417A-A313J Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A219L G1/4 Voltage 220/240 V AC SKU: 903015-20376](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a219l-g1-4-voltage-220-240-v-ac-sku-903015-20376/): ManufacturePartnumber V61B417A-A219L Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20375](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20375/): ManufacturePartnumber V61B417A-A219J Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20374](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20374/): ManufacturePartnumber V61B417A-A218J Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A214J G1/4 Voltage 24 V AC SKU: 903015-20373](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a214j-g1-4-voltage-24-v-ac-sku-903015-20373/): ManufacturePartnumber V61B417A-A214J Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A213L G1/4 Voltage 24 V DC SKU: 903015-20372](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a213l-g1-4-voltage-24-v-dc-sku-903015-20372/): ManufacturePartnumber V61B417A-A213L Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A213J G1/4 Voltage 24 V DC SKU: 903015-20371](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a213j-g1-4-voltage-24-v-dc-sku-903015-20371/): ManufacturePartnumber V61B417A-A213J Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A212J G1/4 Voltage 12 V DC SKU: 903015-20370](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a212j-g1-4-voltage-12-v-dc-sku-903015-20370/): ManufacturePartnumber V61B417A-A212J Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B417A-A113L G1/4 Voltage 24 V DC SKU: 903015-20369](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b417a-a113l-g1-4-voltage-24-v-dc-sku-903015-20369/): ManufacturePartnumber V61B417A-A113L Function NC Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 1 Plug Interface L Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A319L G1/4 Voltage 220/240 V AC SKU: 903015-20368](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a319l-g1-4-voltage-220-240-v-ac-sku-903015-20368/): ManufacturePartnumber V61B413A-A319L Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface L Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20367](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20367/): ManufacturePartnumber V61B413A-A319J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A318J G1/4 Voltage 110/120 V AC SKU: 903015-20366](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a318j-g1-4-voltage-110-120-v-ac-sku-903015-20366/): ManufacturePartnumber V61B413A-A318J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A314J G1/4 Voltage 24 V AC SKU: 903015-20365](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a314j-g1-4-voltage-24-v-ac-sku-903015-20365/): ManufacturePartnumber V61B413A-A314J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A313L G1/4 Voltage 24 V DC SKU: 903015-20364](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a313l-g1-4-voltage-24-v-dc-sku-903015-20364/): ManufacturePartnumber V61B413A-A313L Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A313J G1/4 Voltage 24 V DC SKU: 903015-20363](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a313j-g1-4-voltage-24-v-dc-sku-903015-20363/): ManufacturePartnumber V61B413A-A313J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A312J G1/4 Voltage 12 V DC SKU: 903015-20362](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a312j-g1-4-voltage-12-v-dc-sku-903015-20362/): ManufacturePartnumber V61B413A-A312J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A219L G1/4 Voltage 220/240 V AC (old product no. 85012812) SKU: 903015-20361](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a219l-g1-4-voltage-220-240-v-ac-old-product-no-85012812-sku-903015-20361/): ManufacturePartnumber V61B413A-A219L Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20360](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20360/): ManufacturePartnumber V61B413A-A219J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A218L G1/4 Voltage 110/120 V AC SKU: 903015-20359](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a218l-g1-4-voltage-110-120-v-ac-sku-903015-20359/): ManufacturePartnumber V61B413A-A218L Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20358](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20358/): ManufacturePartnumber V61B413A-A218J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A214J G1/4 Voltage 24 V AC SKU: 903015-20357](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a214j-g1-4-voltage-24-v-ac-sku-903015-20357/): ManufacturePartnumber V61B413A-A214J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A213L G1/4 Voltage 24 V DC (old product no. 85012811) SKU: 903015-20356](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a213l-g1-4-voltage-24-v-dc-old-product-no-85012811-sku-903015-20356/): ManufacturePartnumber V61B413A-A213L Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A213J G1/4 Voltage 24 V DC SKU: 903015-20355](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a213j-g1-4-voltage-24-v-dc-sku-903015-20355/): ManufacturePartnumber V61B413A-A213J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B413A-A212J G1/4 Voltage 12 V DC SKU: 903015-20354](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b413a-a212j-g1-4-voltage-12-v-dc-sku-903015-20354/): ManufacturePartnumber V61B413A-A212J Function NC Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B411A-A319L G1/4 Voltage 220/240 V AC SKU: 903015-20353](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b411a-a319l-g1-4-voltage-220-240-v-ac-sku-903015-20353/): ManufacturePartnumber V61B411A-A319L Function NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface L Length [mm] 179 Width [mm] 25 Height [mm] 40 Weight [kg] 0,38 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B411A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20352](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b411a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20352/): ManufacturePartnumber V61B411A-A319J Function NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 179 Width [mm] 25 Height [mm] 40 Weight [kg] 0,38 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B411A-A318J G1/4 Voltage 110/120 V AC SKU: 903015-20351](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b411a-a318j-g1-4-voltage-110-120-v-ac-sku-903015-20351/): ManufacturePartnumber V61B411A-A318J Function NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 179 Width [mm] 25 Height [mm] 40 Weight [kg] 0,38 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B411A-A313J G1/4 Voltage 24 V DC SKU: 903015-20350](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b411a-a313j-g1-4-voltage-24-v-dc-sku-903015-20350/): ManufacturePartnumber V61B411A-A313J Function NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 179 Width [mm] 25 Height [mm] 40 Weight [kg] 0,38 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B411A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20349](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b411a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20349/): ManufacturePartnumber V61B411A-A219J Function NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 179 Width [mm] 25 Height [mm] 40 Weight [kg] 0,38 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B411A-A213L G1/4 Voltage 24 V DC SKU: 903015-20348](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b411a-a213l-g1-4-voltage-24-v-dc-sku-903015-20348/): ManufacturePartnumber V61B411A-A213L Function NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 179 Width [mm] 25 Height [mm] 40 Weight [kg] 0,38 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B411A-A213J G1/4 Voltage 24 V DC SKU: 903015-20347](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b411a-a213j-g1-4-voltage-24-v-dc-sku-903015-20347/): ManufacturePartnumber V61B411A-A213J Function NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 179 Width [mm] 25 Height [mm] 40 Weight [kg] 0,38 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B323A-A313L G1/4 Voltage 24 V DC SKU: 903015-20346](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b323a-a313l-g1-4-voltage-24-v-dc-sku-903015-20346/): ManufacturePartnumber V61B323A-A313L Function NO Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B323A-A313J G1/4 Voltage 24 V DC SKU: 903015-20345](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b323a-a313j-g1-4-voltage-24-v-dc-sku-903015-20345/): ManufacturePartnumber V61B323A-A313J Function NO Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B323A-A213J G1/4 Voltage 24 V DC SKU: 903015-20344](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b323a-a213j-g1-4-voltage-24-v-dc-sku-903015-20344/): ManufacturePartnumber V61B323A-A213J Function NO Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B317A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20343](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b317a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20343/): ManufacturePartnumber V61B317A-A219J Function NO Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B317A-A213J G1/4 Voltage 24 V DC SKU: 903015-20342](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b317a-a213j-g1-4-voltage-24-v-dc-sku-903015-20342/): ManufacturePartnumber V61B317A-A213J Function NO Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20341](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20341/): ManufacturePartnumber V61B313A-A319J Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A314J G1/4 Voltage 24 V AC SKU: 903015-20340](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a314j-g1-4-voltage-24-v-ac-sku-903015-20340/): ManufacturePartnumber V61B313A-A314J Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A313J G1/4 Voltage 24 V DC SKU: 903015-20339](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a313j-g1-4-voltage-24-v-dc-sku-903015-20339/): ManufacturePartnumber V61B313A-A313J Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A312J G1/4 Voltage 12 V DC SKU: 903015-20338](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a312j-g1-4-voltage-12-v-dc-sku-903015-20338/): ManufacturePartnumber V61B313A-A312J Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A219L G1/4 Voltage 220/240 V AC SKU: 903015-20337](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a219l-g1-4-voltage-220-240-v-ac-sku-903015-20337/): ManufacturePartnumber V61B313A-A219L Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20336](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20336/): ManufacturePartnumber V61B313A-A219J Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20335](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20335/): ManufacturePartnumber V61B313A-A218J Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A214J G1/4 Voltage 24 V AC SKU: 903015-20334](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a214j-g1-4-voltage-24-v-ac-sku-903015-20334/): ManufacturePartnumber V61B313A-A214J Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A213L G1/4 Voltage 24 V DC SKU: 903015-20333](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a213l-g1-4-voltage-24-v-dc-sku-903015-20333/): ManufacturePartnumber V61B313A-A213L Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B313A-A213J G1/4 Voltage 24 V DC SKU: 903015-20332](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b313a-a213j-g1-4-voltage-24-v-dc-sku-903015-20332/): ManufacturePartnumber V61B313A-A213J Function NO Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AA11A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20331](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60aa11a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20331/): ManufacturePartnumber V60AA11A-A319J Function NC/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AA11A-A313L G1/8 Voltage 24 V DC SKU: 903015-20330](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60aa11a-a313l-g1-8-voltage-24-v-dc-sku-903015-20330/): ManufacturePartnumber V60AA11A-A313L Function NC/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AA11A-A313J G1/8 Voltage 24 V DC SKU: 903015-20329](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60aa11a-a313j-g1-8-voltage-24-v-dc-sku-903015-20329/): ManufacturePartnumber V60AA11A-A313J Function NC/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AA11A-A219L G1/8 Voltage 220/240 V AC SKU: 903015-20328](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60aa11a-a219l-g1-8-voltage-220-240-v-ac-sku-903015-20328/): ManufacturePartnumber V60AA11A-A219L Function NC/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AA11A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20327](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60aa11a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20327/): ManufacturePartnumber V60AA11A-A219J Function NC/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AA11A-A213L G1/8 Voltage 24 V DC SKU: 903015-20325](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60aa11a-a213l-g1-8-voltage-24-v-dc-sku-903015-20325/): ManufacturePartnumber V60AA11A-A213L Function NC/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AA11A-A213J G1/8 Voltage 24 V DC SKU: 903015-20324](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60aa11a-a213j-g1-8-voltage-24-v-dc-sku-903015-20324/): ManufacturePartnumber V60AA11A-A213J Function NC/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A811A-A313J G1/8 Voltage 24 V DC SKU: 903015-20323](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a811a-a313j-g1-8-voltage-24-v-dc-sku-903015-20323/): ManufacturePartnumber V60A811A-A313J Function COP Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A811A-A214J G1/8 Voltage 24 V AC SKU: 903015-20322](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a811a-a214j-g1-8-voltage-24-v-ac-sku-903015-20322/): ManufacturePartnumber V60A811A-A214J Function COP Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A811A-A213J G1/8 Voltage 24 V DC SKU: 903015-20321](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a811a-a213j-g1-8-voltage-24-v-dc-sku-903015-20321/): ManufacturePartnumber V60A811A-A213J Function COP Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A722A-A313J G1/8 Voltage 24 V DC SKU: 903015-20320](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a722a-a313j-g1-8-voltage-24-v-dc-sku-903015-20320/): ManufacturePartnumber V60A722A-A313J Function COE Actuation Sol/Sol External Port Size G1/8 Flow Rate 500 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A722A-A213J G1/8 Voltage 24 V DC SKU: 903015-20319](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a722a-a213j-g1-8-voltage-24-v-dc-sku-903015-20319/): ManufacturePartnumber V60A722A-A213J Function COE Actuation Sol/Sol External Port Size G1/8 Flow Rate 500 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A711A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20318](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a711a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20318/): ManufacturePartnumber V60A711A-A319J Function COE Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A711A-A318J G1/8 Voltage 110/120 V AC SKU: 903015-20317](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a711a-a318j-g1-8-voltage-110-120-v-ac-sku-903015-20317/): ManufacturePartnumber V60A711A-A318J Function COE Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A711A-A313L G1/8 Voltage 24 V DC SKU: 903015-20316](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a711a-a313l-g1-8-voltage-24-v-dc-sku-903015-20316/): ManufacturePartnumber V60A711A-A313L Function COE Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A711A-A313J G1/8 Voltage 24 V DC SKU: 903015-20315](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a711a-a313j-g1-8-voltage-24-v-dc-sku-903015-20315/): ManufacturePartnumber V60A711A-A313J Function COE Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A711A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20313](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a711a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20313/): ManufacturePartnumber V60A711A-A219J Function COE Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A711A-A213L G1/8 Voltage 24 V DC (old product no. 85061811) SKU: 903015-20312](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a711a-a213l-g1-8-voltage-24-v-dc-old-product-no-85061811-sku-903015-20312/): ManufacturePartnumber V60A711A-A213L Function COE Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A711A-A213J G1/8 Voltage 24 V DC SKU: 903015-20311](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a711a-a213j-g1-8-voltage-24-v-dc-sku-903015-20311/): ManufacturePartnumber V60A711A-A213J Function COE Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A622A-A313J G1/8 Voltage 24 V DC SKU: 903015-20310](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a622a-a313j-g1-8-voltage-24-v-dc-sku-903015-20310/): ManufacturePartnumber V60A622A-A313J Function APB Actuation Sol/Sol External Port Size G1/8 Flow Rate 500 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A622A-A213J G1/8 Voltage 24 V DC SKU: 903015-20309](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a622a-a213j-g1-8-voltage-24-v-dc-sku-903015-20309/): ManufacturePartnumber V60A622A-A213J Function APB Actuation Sol/Sol External Port Size G1/8 Flow Rate 500 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20308](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20308/): ManufacturePartnumber V60A611A-A319J Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A313L G1/8 Voltage 24 V DC SKU: 903015-20307](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a313l-g1-8-voltage-24-v-dc-sku-903015-20307/): ManufacturePartnumber V60A611A-A313L Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A313J G1/8 Voltage 24 V DC SKU: 903015-20306](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a313j-g1-8-voltage-24-v-dc-sku-903015-20306/): ManufacturePartnumber V60A611A-A313J Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20305](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20305/): ManufacturePartnumber V60A611A-A219J Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A218J G1/8 Voltage 110/120 V AC SKU: 903015-20304](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a218j-g1-8-voltage-110-120-v-ac-sku-903015-20304/): ManufacturePartnumber V60A611A-A218J Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A214J G1/8 Voltage 24 V AC SKU: 903015-20303](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a214j-g1-8-voltage-24-v-ac-sku-903015-20303/): ManufacturePartnumber V60A611A-A214J Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A213L G1/8 Voltage 24 V DC (old product no. 85051811) SKU: 903015-20302](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a213l-g1-8-voltage-24-v-dc-old-product-no-85051811-sku-903015-20302/): ManufacturePartnumber V60A611A-A213L Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A213J G1/8 Voltage 24 V DC SKU: 903015-20301](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a213j-g1-8-voltage-24-v-dc-sku-903015-20301/): ManufacturePartnumber V60A611A-A213J Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A212L G1/8 Voltage 12 V DC SKU: 903015-20300](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a212l-g1-8-voltage-12-v-dc-sku-903015-20300/): ManufacturePartnumber V60A611A-A212L Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V60A611A-A212J G1/8 Voltage 12 V DC SKU: 903015-20299](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v60a611a-a212j-g1-8-voltage-12-v-dc-sku-903015-20299/): ManufacturePartnumber V60A611A-A212J Function APB Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 188,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,35 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A527A-A213L G1/8 Voltage 24 V DC SKU: 903015-20298](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a527a-a213l-g1-8-voltage-24-v-dc-sku-903015-20298/): ManufacturePartnumber V60A527A-A213L Function – Actuation Sol/spring External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A527A-A213J G1/8 Voltage 24 V DC SKU: 903015-20297](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a527a-a213j-g1-8-voltage-24-v-dc-sku-903015-20297/): ManufacturePartnumber V60A527A-A213J Function – Actuation Sol/spring External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A523A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20296](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a523a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20296/): ManufacturePartnumber V60A523A-A319J Function – Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A523A-A313J G1/8 Voltage 24 V DC SKU: 903015-20295](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a523a-a313j-g1-8-voltage-24-v-dc-sku-903015-20295/): ManufacturePartnumber V60A523A-A313J Function – Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A523A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20294](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a523a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20294/): ManufacturePartnumber V60A523A-A219J Function – Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A523A-A218J G1/8 Voltage 110/120 V AC SKU: 903015-20293](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a523a-a218j-g1-8-voltage-110-120-v-ac-sku-903015-20293/): ManufacturePartnumber V60A523A-A218J Function – Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A523A-A213L G1/8 Voltage 24 V DC SKU: 903015-20292](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a523a-a213l-g1-8-voltage-24-v-dc-sku-903015-20292/): ManufacturePartnumber V60A523A-A213L Function – Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A523A-A213J G1/8 Voltage 24 V DC SKU: 903015-20291](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a523a-a213j-g1-8-voltage-24-v-dc-sku-903015-20291/): ManufacturePartnumber V60A523A-A213J Function – Actuation Sol/air External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 132 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A522A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20290](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a522a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20290/): ManufacturePartnumber V60A522A-A319J Function – Actuation Sol/Sol External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A522A-A313J G1/8 Voltage 24 V DC SKU: 903015-20289](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a522a-a313j-g1-8-voltage-24-v-dc-sku-903015-20289/): ManufacturePartnumber V60A522A-A313J Function – Actuation Sol/Sol External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A522A-A213J G1/8 Voltage 24 V DC SKU: 903015-20288](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a522a-a213j-g1-8-voltage-24-v-dc-sku-903015-20288/): ManufacturePartnumber V60A522A-A213J Function – Actuation Sol/Sol External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A522A-A212J G1/8 Voltage 12 V DC SKU: 903015-20287](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a522a-a212j-g1-8-voltage-12-v-dc-sku-903015-20287/): ManufacturePartnumber V60A522A-A212J Function – Actuation Sol/Sol External Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 174,50 Width [mm] 22 Height [mm] 35 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A517A-A319J G1/8 Voltage 220/240 V AC SKU: 903015-20286](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a319j-g1-8-voltage-220-240-v-ac-sku-903015-20286/): ManufacturePartnumber V60A517A-A319J Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A517A-A314J G1/8 Voltage 24 V AC SKU: 903015-20285](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a314j-g1-8-voltage-24-v-ac-sku-903015-20285/): ManufacturePartnumber V60A517A-A314J Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A517A-A313L G1/8 Voltage 24 V DC SKU: 903015-20284](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a313l-g1-8-voltage-24-v-dc-sku-903015-20284/): ManufacturePartnumber V60A517A-A313L Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A517A-A313J G1/8 Voltage 24 V DC SKU: 903015-20283](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a313j-g1-8-voltage-24-v-dc-sku-903015-20283/): ManufacturePartnumber V60A517A-A313J Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A517A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20282](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20282/): ManufacturePartnumber V60A517A-A219J Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A517A-A218J G1/8 Voltage 110/120 V AC SKU: 903015-20281](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a218j-g1-8-voltage-110-120-v-ac-sku-903015-20281/): ManufacturePartnumber V60A517A-A218J Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60A517A-A214J G1/8 Voltage 24 V AC SKU: 903015-20280](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60a517a-a214j-g1-8-voltage-24-v-ac-sku-903015-20280/): ManufacturePartnumber V60A517A-A214J Function – Actuation Sol/spring Internal Port Size G1/8 Flow Rate 750 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,22 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane timing belt AT5 width 16mm Lw 275mm 55 teeth 16 AT5/275 SKU: 16670300](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-275mm-55-teeth-16-at5-275-sku-16670300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 255mm 51 teeth 16 AT5/255 SKU: 16670200](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-255mm-51-teeth-16-at5-255-sku-16670200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 225mm 45 teeth 16 AT5/225 SKU: 16670100](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-225mm-45-teeth-16-at5-225-sku-16670100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm 16AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16670001](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-16at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16670001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 16mm 16AT5 open length SKU: 16670000](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-16at5-open-length-sku-16670000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT5 belt width 10mm SKU: 16669900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-10mm-sku-16669900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt AT5 width 10mm Lw 1500mm 300 teeth 10 AT5/1500 SKU: 16662400](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-1500mm-300-teeth-10-at5-1500-sku-16662400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 1125mm 225 teeth 10 AT5/1125 SKU: 16662300](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-1125mm-225-teeth-10-at5-1125-sku-16662300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 1050mm 210 teeth 10 AT5/1050 SKU: 16662200](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-1050mm-210-teeth-10-at5-1050-sku-16662200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 975mm 195 teeth 10 AT5/975 SKU: 16662100](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-975mm-195-teeth-10-at5-975-sku-16662100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 825mm 165 teeth 10 AT5/825 SKU: 16662000](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-825mm-165-teeth-10-at5-825-sku-16662000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 780mm 156 teeth 10 AT5/780 SKU: 16661900](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-780mm-156-teeth-10-at5-780-sku-16661900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 750mm 150 teeth 10 AT5/750 SKU: 16661800](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-750mm-150-teeth-10-at5-750-sku-16661800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 720mm 144 teeth 10 AT5/720 SKU: 16661700](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-720mm-144-teeth-10-at5-720-sku-16661700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 660mm 132 teeth 10 AT5/660 SKU: 16661600](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-660mm-132-teeth-10-at5-660-sku-16661600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 630mm 126 teeth 10 AT5/630 SKU: 16661500](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-630mm-126-teeth-10-at5-630-sku-16661500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 610mm 122 teeth 10 AT5/610 SKU: 16661400](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-610mm-122-teeth-10-at5-610-sku-16661400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 600mm 120 teeth 10 AT5/600 SKU: 16661300](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-600mm-120-teeth-10-at5-600-sku-16661300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 545mm 109 teeth 10 AT5/545 SKU: 16661200](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-545mm-109-teeth-10-at5-545-sku-16661200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 500mm 100 teeth 10 AT5/500 SKU: 16661100](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-500mm-100-teeth-10-at5-500-sku-16661100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 455mm 91 teeth 10 AT5/455 SKU: 16661000](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-455mm-91-teeth-10-at5-455-sku-16661000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 420mm 84 teeth 10 AT5/420 SKU: 16660900](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-420mm-84-teeth-10-at5-420-sku-16660900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 390mm 78 teeth 10 AT5/390 SKU: 16660800](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-390mm-78-teeth-10-at5-390-sku-16660800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 375mm 75 teeth 10 AT5/375 SKU: 16660700](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-375mm-75-teeth-10-at5-375-sku-16660700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 340mm 68 teeth 10 AT5/340 SKU: 16660600](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-340mm-68-teeth-10-at5-340-sku-16660600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 300mm 60 teeth 10 AT5/300 SKU: 16660500](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-300mm-60-teeth-10-at5-300-sku-16660500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 280mm 56 teeth 10 AT5/280 SKU: 16660400](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-280mm-56-teeth-10-at5-280-sku-16660400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 275mm 55 teeth 10 AT5/275 SKU: 16660300](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-275mm-55-teeth-10-at5-275-sku-16660300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 255mm 51 teeth 10 AT5/255 SKU: 16660200](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-255mm-51-teeth-10-at5-255-sku-16660200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm Lw 225mm 45 teeth 10 AT5/225 SKU: 16660100](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-lw-225mm-45-teeth-10-at5-225-sku-16660100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 10mm 10AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16660001](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-10at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16660001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 10mm 10 AT5 open length SKU: 16660000](https://maedler.in/product/polyurethane-timing-belt-at5-width-10mm-10-at5-open-length-sku-16660000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Timing belt pulley AT5 material aluminium 72 teeth for belt width 32 mm 46 AT5/72-0 SKU: 16657200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-72-teeth-for-belt-width-32-mm-46-at5-72-0-sku-16657200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 60 teeth for belt width 32mm 46 AT5/60-0 SKU: 16656000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-60-teeth-for-belt-width-32mm-46-at5-60-0-sku-16656000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 48 teeth for belt width 32mm 46 AT5/48-0 SKU: 16654800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-48-teeth-for-belt-width-32mm-46-at5-48-0-sku-16654800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 44 teeth for belt width 32mm 46 AT5/44-0 SKU: 16654400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-44-teeth-for-belt-width-32mm-46-at5-44-0-sku-16654400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 42 teeth for belt width 32mm 46 AT5/42-2 SKU: 16654200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-42-teeth-for-belt-width-32mm-46-at5-42-2-sku-16654200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 40 teeth for belt width 32mm 46 AT5/40-2 SKU: 16654000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-40-teeth-for-belt-width-32mm-46-at5-40-2-sku-16654000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 36 teeth for belt width 32mm 46 AT5/36-2 SKU: 16653600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-36-teeth-for-belt-width-32mm-46-at5-36-2-sku-16653600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 32 teeth for belt width 32mm 46 AT5/32-2 SKU: 16653200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-32-teeth-for-belt-width-32mm-46-at5-32-2-sku-16653200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 30 teeth for belt width 32mm 46 AT5/30-2 SKU: 16653000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-30-teeth-for-belt-width-32mm-46-at5-30-2-sku-16653000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 28 teeth for belt width 32mm 46 AT5/28-2 SKU: 16652800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-28-teeth-for-belt-width-32mm-46-at5-28-2-sku-16652800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 27 teeth for belt width 32mm 46 AT5/27-2 SKU: 16652700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-27-teeth-for-belt-width-32mm-46-at5-27-2-sku-16652700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 26 teeth for belt width 32mm 46 AT5/26-2 SKU: 16652600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-26-teeth-for-belt-width-32mm-46-at5-26-2-sku-16652600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 25 teeth for belt width 32mm 46 AT5/25-2 SKU: 16652500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-25-teeth-for-belt-width-32mm-46-at5-25-2-sku-16652500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 24 teeth for belt width 32mm 46 AT5/24-2 SKU: 16652400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-24-teeth-for-belt-width-32mm-46-at5-24-2-sku-16652400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 22 teeth for belt width 32mm 46 AT5/22-2 SKU: 16652200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-22-teeth-for-belt-width-32mm-46-at5-22-2-sku-16652200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 20 teeth for belt width 32mm 46 AT5/20-2 SKU: 16652000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-20-teeth-for-belt-width-32mm-46-at5-20-2-sku-16652000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 19 teeth for belt width 32mm 46 AT5/19-2 SKU: 16651900](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-19-teeth-for-belt-width-32mm-46-at5-19-2-sku-16651900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 18 teeth for belt width 32mm 46 AT5/18-2 SKU: 16651800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-18-teeth-for-belt-width-32mm-46-at5-18-2-sku-16651800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 17 teeth for belt width 32 mm 46 AT5/17-2 SKU: 16651700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-17-teeth-for-belt-width-32-mm-46-at5-17-2-sku-16651700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 16 teeth for belt width 32mm 46 AT5/16-2 SKU: 16651600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-16-teeth-for-belt-width-32mm-46-at5-16-2-sku-16651600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 15 teeth for belt width 32mm 46 AT5/15-2 SKU: 16651500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-15-teeth-for-belt-width-32mm-46-at5-15-2-sku-16651500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 14 teeth for belt width 32mm 46 AT5/14-2 SKU: 16651400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-14-teeth-for-belt-width-32mm-46-at5-14-2-sku-16651400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 12 teeth for belt width 32mm 46 AT5/12-2 SKU: 16651200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-12-teeth-for-belt-width-32mm-46-at5-12-2-sku-16651200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 96 teeth for belt width 25 mm 36 AT5/96-0 SKU: 16649600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-96-teeth-for-belt-width-25-mm-36-at5-96-0-sku-16649600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 84 teeth for belt width 25 mm 36 AT5/84-0 SKU: 16648400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-84-teeth-for-belt-width-25-mm-36-at5-84-0-sku-16648400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 72 teeth for belt width 25 mm 36 AT5/72-0 SKU: 16647200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-72-teeth-for-belt-width-25-mm-36-at5-72-0-sku-16647200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 60 teeth for belt width 25mm 36 AT5/60-0 SKU: 16646000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-60-teeth-for-belt-width-25mm-36-at5-60-0-sku-16646000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 48 teeth for belt width 25mm 36 AT5/48-0 SKU: 16644800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-48-teeth-for-belt-width-25mm-36-at5-48-0-sku-16644800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 44 teeth for belt width 25mm 36 AT5/44-0 SKU: 16644400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-44-teeth-for-belt-width-25mm-36-at5-44-0-sku-16644400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 42 teeth for belt width 25mm 36 AT5/42-2 SKU: 16644200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-42-teeth-for-belt-width-25mm-36-at5-42-2-sku-16644200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 40 teeth for belt width 25mm 36 AT5/40-2 SKU: 16644000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-40-teeth-for-belt-width-25mm-36-at5-40-2-sku-16644000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 36 teeth for belt width 25mm 36 AT5/36-2 SKU: 16643600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-36-teeth-for-belt-width-25mm-36-at5-36-2-sku-16643600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 32 teeth for belt width 25mm 36 AT5/32-2 SKU: 16643200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-32-teeth-for-belt-width-25mm-36-at5-32-2-sku-16643200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 30 teeth for belt width 25mm 36 AT5/30-2 SKU: 16643000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-30-teeth-for-belt-width-25mm-36-at5-30-2-sku-16643000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 28 teeth for belt width 25mm 36 AT5/28-2 SKU: 16642800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-28-teeth-for-belt-width-25mm-36-at5-28-2-sku-16642800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 27 teeth for belt width 25mm 36 AT5/27-2 SKU: 16642700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-27-teeth-for-belt-width-25mm-36-at5-27-2-sku-16642700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 26 teeth for belt width 25mm 36 AT5/26-2 SKU: 16642600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-26-teeth-for-belt-width-25mm-36-at5-26-2-sku-16642600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 25 teeth for belt width 25mm 36 AT5/25-2 SKU: 16642500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-25-teeth-for-belt-width-25mm-36-at5-25-2-sku-16642500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 24 teeth for belt width 25mm 36 AT5/24-2 SKU: 16642400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-24-teeth-for-belt-width-25mm-36-at5-24-2-sku-16642400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 22 teeth for belt width 25mm 36 AT5/22-2 SKU: 16642200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-22-teeth-for-belt-width-25mm-36-at5-22-2-sku-16642200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 20 teeth for belt width 25mm 36 AT5/20-2 SKU: 16642000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-20-teeth-for-belt-width-25mm-36-at5-20-2-sku-16642000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 19 teeth for belt width 25mm 36 AT5/19-2 SKU: 16641900](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-19-teeth-for-belt-width-25mm-36-at5-19-2-sku-16641900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 18 teeth for belt width 25mm 36 AT5/18-2 SKU: 16641800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-18-teeth-for-belt-width-25mm-36-at5-18-2-sku-16641800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 17 teeth for belt width 25 mm 36 AT5/17-2 SKU: 16641700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-17-teeth-for-belt-width-25-mm-36-at5-17-2-sku-16641700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 16 teeth for belt width 25mm 36 AT5/16-2 SKU: 16641600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-16-teeth-for-belt-width-25mm-36-at5-16-2-sku-16641600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 15 teeth for belt width 25mm 36 AT5/15-2 SKU: 16641500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-15-teeth-for-belt-width-25mm-36-at5-15-2-sku-16641500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 14 teeth for belt width 25mm 36 AT5/14-2 SKU: 16641400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-14-teeth-for-belt-width-25mm-36-at5-14-2-sku-16641400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 12 teeth for belt width 25mm 36 AT5/12-2 SKU: 16641200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-12-teeth-for-belt-width-25mm-36-at5-12-2-sku-16641200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 96 teeth for belt width 16 mm 27 AT5/96-0 SKU: 16639600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-96-teeth-for-belt-width-16-mm-27-at5-96-0-sku-16639600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 84 teeth for belt width 16 mm 27 AT5/84-0 SKU: 16638400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-84-teeth-for-belt-width-16-mm-27-at5-84-0-sku-16638400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 72 teeth for belt width 16 mm 27 AT5/72-0 SKU: 16637200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-72-teeth-for-belt-width-16-mm-27-at5-72-0-sku-16637200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 60 teeth for belt width 16mm 27 AT5/60-0 SKU: 16636000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-60-teeth-for-belt-width-16mm-27-at5-60-0-sku-16636000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 48 teeth for belt width 16mm 27 AT5/48-0 SKU: 16634800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-48-teeth-for-belt-width-16mm-27-at5-48-0-sku-16634800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 44 teeth for belt width 16mm 27 AT5/44-0 SKU: 16634400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-44-teeth-for-belt-width-16mm-27-at5-44-0-sku-16634400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 42 teeth for belt width 16mm 27 AT5/42-2 SKU: 16634200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-42-teeth-for-belt-width-16mm-27-at5-42-2-sku-16634200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 40 teeth for belt width 16mm 27 AT5/40-2 SKU: 16634000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-40-teeth-for-belt-width-16mm-27-at5-40-2-sku-16634000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 36 teeth for belt width 16mm 27 AT5/36-2 SKU: 16633600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-36-teeth-for-belt-width-16mm-27-at5-36-2-sku-16633600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 32 teeth for belt width 16mm 27 AT5/32-2 SKU: 16633200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-32-teeth-for-belt-width-16mm-27-at5-32-2-sku-16633200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 30 teeth for belt width 16mm 27 AT5/30-2 SKU: 16633000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-30-teeth-for-belt-width-16mm-27-at5-30-2-sku-16633000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 28 teeth for belt width 16mm 27 AT5/28-2 SKU: 16632800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-28-teeth-for-belt-width-16mm-27-at5-28-2-sku-16632800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 27 teeth for belt width 16mm 27 AT5/27-2 SKU: 16632700](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-27-teeth-for-belt-width-16mm-27-at5-27-2-sku-16632700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 26 teeth for belt width 16mm 27 AT5/26-2 SKU: 16632600](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-26-teeth-for-belt-width-16mm-27-at5-26-2-sku-16632600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 25 teeth for belt width 16mm 27 AT5/25-2 SKU: 16632500](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-25-teeth-for-belt-width-16mm-27-at5-25-2-sku-16632500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 24 teeth for belt width 16mm 27 AT5/24-2 SKU: 16632400](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-24-teeth-for-belt-width-16mm-27-at5-24-2-sku-16632400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 22 teeth for belt width 16mm 27 AT5/22-2 SKU: 16632200](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-22-teeth-for-belt-width-16mm-27-at5-22-2-sku-16632200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 20 teeth for belt width 16mm 27 AT5/20-2 SKU: 16632000](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-20-teeth-for-belt-width-16mm-27-at5-20-2-sku-16632000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 19 teeth for belt width 16mm 27 AT5/19-2 SKU: 16631900](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-19-teeth-for-belt-width-16mm-27-at5-19-2-sku-16631900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT5 material aluminium 18 teeth for belt width 16mm 27 AT5/18-2 SKU: 16631800](https://maedler.in/product/timing-belt-pulley-at5-material-aluminium-18-teeth-for-belt-width-16mm-27-at5-18-2-sku-16631800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [5/3-directional control valve solenoid actuated Norgren V61B811A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20485](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b811a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20485/): ManufacturePartnumber V61B811A-A319J Function COP Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B811A-A313J G1/4 Voltage 24 V DC SKU: 903015-20484](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b811a-a313j-g1-4-voltage-24-v-dc-sku-903015-20484/): ManufacturePartnumber V61B811A-A313J Function COP Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B811A-A213J G1/4 Voltage 24 V DC SKU: 903015-20483](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b811a-a213j-g1-4-voltage-24-v-dc-sku-903015-20483/): ManufacturePartnumber V61B811A-A213J Function COP Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B722A-A313J G1/4 Voltage 24 V DC SKU: 903015-20482](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b722a-a313j-g1-4-voltage-24-v-dc-sku-903015-20482/): ManufacturePartnumber V61B722A-A313J Function COE Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B722A-A219L G1/4 Voltage 220/240 V AC SKU: 903015-20481](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b722a-a219l-g1-4-voltage-220-240-v-ac-sku-903015-20481/): ManufacturePartnumber V61B722A-A219L Function COE Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B722A-A213L G1/4 Voltage 24 V DC SKU: 903015-20480](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b722a-a213l-g1-4-voltage-24-v-dc-sku-903015-20480/): ManufacturePartnumber V61B722A-A213L Function COE Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B722A-A213J G1/4 Voltage 24 V DC SKU: 903015-20479](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b722a-a213j-g1-4-voltage-24-v-dc-sku-903015-20479/): ManufacturePartnumber V61B722A-A213J Function COE Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20478](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20478/): ManufacturePartnumber V61B711A-A319J Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A313L G1/4 Voltage 24 V DC SKU: 903015-20476](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a313l-g1-4-voltage-24-v-dc-sku-903015-20476/): ManufacturePartnumber V61B711A-A313L Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A313J G1/4 Voltage 24 V DC SKU: 903015-20475](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a313j-g1-4-voltage-24-v-dc-sku-903015-20475/): ManufacturePartnumber V61B711A-A313J Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A219L G1/4 Voltage 220/240 V AC (old product no. 85062812) SKU: 903015-20474](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a219l-g1-4-voltage-220-240-v-ac-old-product-no-85062812-sku-903015-20474/): ManufacturePartnumber V61B711A-A219L Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20473](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20473/): ManufacturePartnumber V61B711A-A219J Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20472](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20472/): ManufacturePartnumber V61B711A-A218J Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A214J G1/4 Voltage 24 V AC SKU: 903015-20471](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a214j-g1-4-voltage-24-v-ac-sku-903015-20471/): ManufacturePartnumber V61B711A-A214J Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A213L G1/4 Voltage 24 V DC (old product no. 85062811) SKU: 903015-20470](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a213l-g1-4-voltage-24-v-dc-old-product-no-85062811-sku-903015-20470/): ManufacturePartnumber V61B711A-A213L Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A213J G1/4 Voltage 24 V DC SKU: 903015-20469](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a213j-g1-4-voltage-24-v-dc-sku-903015-20469/): ManufacturePartnumber V61B711A-A213J Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B711A-A212J G1/4 Voltage 12 V DC SKU: 903015-20468](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b711a-a212j-g1-4-voltage-12-v-dc-sku-903015-20468/): ManufacturePartnumber V61B711A-A212J Function COE Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B622A-A313L G1/4 Voltage 24 V DC SKU: 903015-20467](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b622a-a313l-g1-4-voltage-24-v-dc-sku-903015-20467/): ManufacturePartnumber V61B622A-A313L Function APB Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B622A-A313J G1/4 Voltage 24 V DC SKU: 903015-20466](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b622a-a313j-g1-4-voltage-24-v-dc-sku-903015-20466/): ManufacturePartnumber V61B622A-A313J Function APB Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B622A-A213L G1/4 Voltage 24 V DC SKU: 903015-20465](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b622a-a213l-g1-4-voltage-24-v-dc-sku-903015-20465/): ManufacturePartnumber V61B622A-A213L Function APB Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B622A-A213J G1/4 Voltage 24 V DC SKU: 903015-20464](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b622a-a213j-g1-4-voltage-24-v-dc-sku-903015-20464/): ManufacturePartnumber V61B622A-A213J Function APB Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20463](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20463/): ManufacturePartnumber V61B611A-A319J Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A318J G1/4 Voltage 110/120 V AC SKU: 903015-20462](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a318j-g1-4-voltage-110-120-v-ac-sku-903015-20462/): ManufacturePartnumber V61B611A-A318J Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A314J G1/4 Voltage 24 V AC SKU: 903015-20461](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a314j-g1-4-voltage-24-v-ac-sku-903015-20461/): ManufacturePartnumber V61B611A-A314J Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A313L G1/4 Voltage 24 V DC SKU: 903015-20460](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a313l-g1-4-voltage-24-v-dc-sku-903015-20460/): ManufacturePartnumber V61B611A-A313L Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A313J G1/4 Voltage 24 V DC SKU: 903015-20459](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a313j-g1-4-voltage-24-v-dc-sku-903015-20459/): ManufacturePartnumber V61B611A-A313J Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A219L G1/4 Voltage 220/240 V AC (old product no. 85052812) SKU: 903015-20458](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a219l-g1-4-voltage-220-240-v-ac-old-product-no-85052812-sku-903015-20458/): ManufacturePartnumber V61B611A-A219L Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20457](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20457/): ManufacturePartnumber V61B611A-A219J Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A218L G1/4 Voltage 110/120 V AC SKU: 903015-20456](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a218l-g1-4-voltage-110-120-v-ac-sku-903015-20456/): ManufacturePartnumber V61B611A-A218L Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20455](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20455/): ManufacturePartnumber V61B611A-A218J Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A214J G1/4 Voltage 24 V AC SKU: 903015-20454](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a214j-g1-4-voltage-24-v-ac-sku-903015-20454/): ManufacturePartnumber V61B611A-A214J Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A213L G1/4 Voltage 24 V DC (old product no. 85052811) SKU: 903015-20453](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a213l-g1-4-voltage-24-v-dc-old-product-no-85052811-sku-903015-20453/): ManufacturePartnumber V61B611A-A213L Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B611A-A213J G1/4 Voltage 24 V DC SKU: 903015-20452](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b611a-a213j-g1-4-voltage-24-v-dc-sku-903015-20452/): ManufacturePartnumber V61B611A-A213J Function APB Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B527A-A313J G1/4 Voltage 24 V DC SKU: 903015-20450](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b527a-a313j-g1-4-voltage-24-v-dc-sku-903015-20450/): ManufacturePartnumber V61B527A-A313J Function – Actuation Sol/spring External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B527A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20449](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b527a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20449/): ManufacturePartnumber V61B527A-A219J Function – Actuation Sol/spring External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B527A-A213J G1/4 Voltage 24 V DC SKU: 903015-20448](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b527a-a213j-g1-4-voltage-24-v-dc-sku-903015-20448/): ManufacturePartnumber V61B527A-A213J Function – Actuation Sol/spring External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B523A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20447](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b523a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20447/): ManufacturePartnumber V61B523A-A319J Function – Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B523A-A314J G1/4 Voltage 24 V AC SKU: 903015-20446](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b523a-a314j-g1-4-voltage-24-v-ac-sku-903015-20446/): ManufacturePartnumber V61B523A-A314J Function – Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B523A-A313J G1/4 Voltage 24 V DC SKU: 903015-20445](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b523a-a313j-g1-4-voltage-24-v-dc-sku-903015-20445/): ManufacturePartnumber V61B523A-A313J Function – Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B523A-A219L G1/4 Voltage 220/240 V AC SKU: 903015-20444](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b523a-a219l-g1-4-voltage-220-240-v-ac-sku-903015-20444/): ManufacturePartnumber V61B523A-A219L Function – Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B523A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20443](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b523a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20443/): ManufacturePartnumber V61B523A-A219J Function – Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B523A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20442](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b523a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20442/): ManufacturePartnumber V61B523A-A218J Function – Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B523A-A214J G1/4 Voltage 24 V AC SKU: 903015-20441](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b523a-a214j-g1-4-voltage-24-v-ac-sku-903015-20441/): ManufacturePartnumber V61B523A-A214J Function – Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B523A-A213L G1/4 Voltage 24 V DC SKU: 903015-20440](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b523a-a213l-g1-4-voltage-24-v-dc-sku-903015-20440/): ManufacturePartnumber V61B523A-A213L Function – Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B523A-A213J G1/4 Voltage 24 V DC SKU: 903015-20439](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b523a-a213j-g1-4-voltage-24-v-dc-sku-903015-20439/): ManufacturePartnumber V61B523A-A213J Function – Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B522A-A313J G1/4 Voltage 24 V DC SKU: 903015-20438](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b522a-a313j-g1-4-voltage-24-v-dc-sku-903015-20438/): ManufacturePartnumber V61B522A-A313J Function – Actuation Sol/Sol External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B522A-A213J G1/4 Voltage 24 V DC SKU: 903015-20437](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b522a-a213j-g1-4-voltage-24-v-dc-sku-903015-20437/): ManufacturePartnumber V61B522A-A213J Function – Actuation Sol/Sol External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20436](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20436/): ManufacturePartnumber V61B517A-A319J Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A318J G1/4 Voltage 110/120 V AC SKU: 903015-20435](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a318j-g1-4-voltage-110-120-v-ac-sku-903015-20435/): ManufacturePartnumber V61B517A-A318J Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A313L G1/4 Voltage 24 V DC SKU: 903015-20434](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a313l-g1-4-voltage-24-v-dc-sku-903015-20434/): ManufacturePartnumber V61B517A-A313L Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A313J G1/4 Voltage 24 V DC SKU: 903015-20433](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a313j-g1-4-voltage-24-v-dc-sku-903015-20433/): ManufacturePartnumber V61B517A-A313J Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A312J G1/4 Voltage 12 V DC SKU: 903015-20432](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a312j-g1-4-voltage-12-v-dc-sku-903015-20432/): ManufacturePartnumber V61B517A-A312J Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A219L G1/4 Voltage 220/240 V AC SKU: 903015-20431](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a219l-g1-4-voltage-220-240-v-ac-sku-903015-20431/): ManufacturePartnumber V61B517A-A219L Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20430](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20430/): ManufacturePartnumber V61B517A-A219J Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20429](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20429/): ManufacturePartnumber V61B517A-A218J Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A214J G1/4 Voltage 24 V AC SKU: 903015-20428](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a214j-g1-4-voltage-24-v-ac-sku-903015-20428/): ManufacturePartnumber V61B517A-A214J Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A213L G1/4 Voltage 24 V DC SKU: 903015-20427](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a213l-g1-4-voltage-24-v-dc-sku-903015-20427/): ManufacturePartnumber V61B517A-A213L Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A213J G1/4 Voltage 24 V DC SKU: 903015-20426](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a213j-g1-4-voltage-24-v-dc-sku-903015-20426/): ManufacturePartnumber V61B517A-A213J Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A212J G1/4 Voltage 12 V DC SKU: 903015-20425](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a212j-g1-4-voltage-12-v-dc-sku-903015-20425/): ManufacturePartnumber V61B517A-A212J Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B517A-A113L G1/4 Voltage 24 V DC SKU: 903015-20424](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b517a-a113l-g1-4-voltage-24-v-dc-sku-903015-20424/): ManufacturePartnumber V61B517A-A113L Function – Actuation Sol/spring Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 1 Plug Interface L Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A319L G1/4 Voltage 220/240 V AC SKU: 903015-20423](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a319l-g1-4-voltage-220-240-v-ac-sku-903015-20423/): ManufacturePartnumber V61B513A-A319L Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20422](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20422/): ManufacturePartnumber V61B513A-A319J Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A318L G1/4 Voltage 110/120 V AC SKU: 903015-20421](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a318l-g1-4-voltage-110-120-v-ac-sku-903015-20421/): ManufacturePartnumber V61B513A-A318L Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A318J G1/4 Voltage 110/120 V AC SKU: 903015-20420](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a318j-g1-4-voltage-110-120-v-ac-sku-903015-20420/): ManufacturePartnumber V61B513A-A318J Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A314J G1/4 Voltage 24 V AC SKU: 903015-20419](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a314j-g1-4-voltage-24-v-ac-sku-903015-20419/): ManufacturePartnumber V61B513A-A314J Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A313L G1/4 Voltage 24 V DC SKU: 903015-20418](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a313l-g1-4-voltage-24-v-dc-sku-903015-20418/): ManufacturePartnumber V61B513A-A313L Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A313J G1/4 Voltage 24 V DC SKU: 903015-20417](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a313j-g1-4-voltage-24-v-dc-sku-903015-20417/): ManufacturePartnumber V61B513A-A313J Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A219L G1/4 Voltage 220/240 V AC (old product no. 85032812) SKU: 903015-20416](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a219l-g1-4-voltage-220-240-v-ac-old-product-no-85032812-sku-903015-20416/): ManufacturePartnumber V61B513A-A219L Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20415](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20415/): ManufacturePartnumber V61B513A-A219J Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A218L G1/4 Voltage 110/120 V AC SKU: 903015-20414](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a218l-g1-4-voltage-110-120-v-ac-sku-903015-20414/): ManufacturePartnumber V61B513A-A218L Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20413](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20413/): ManufacturePartnumber V61B513A-A218J Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A214L G1/4 Voltage 24 V AC SKU: 903015-20412](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a214l-g1-4-voltage-24-v-ac-sku-903015-20412/): ManufacturePartnumber V61B513A-A214L Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A214J G1/4 Voltage 24 V AC SKU: 903015-20411](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a214j-g1-4-voltage-24-v-ac-sku-903015-20411/): ManufacturePartnumber V61B513A-A214J Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A213L G1/4 Voltage 24 V DC (old product no. 85032811) SKU: 903015-20410](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a213l-g1-4-voltage-24-v-dc-old-product-no-85032811-sku-903015-20410/): ManufacturePartnumber V61B513A-A213L Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A213J G1/4 Voltage 24 V DC SKU: 903015-20409](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a213j-g1-4-voltage-24-v-dc-sku-903015-20409/): ManufacturePartnumber V61B513A-A213J Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A212L G1/4 Voltage 12 V DC SKU: 903015-20408](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a212l-g1-4-voltage-12-v-dc-sku-903015-20408/): ManufacturePartnumber V61B513A-A212L Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B513A-A212J G1/4 Voltage 12 V DC SKU: 903015-20407](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b513a-a212j-g1-4-voltage-12-v-dc-sku-903015-20407/): ManufacturePartnumber V61B513A-A212J Function – Actuation Sol/air Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 153 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A319L G1/4 Voltage 220/240 V AC (old product no. 85042812) SKU: 903015-20406](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a319l-g1-4-voltage-220-240-v-ac-old-product-no-85042812-sku-903015-20406/): ManufacturePartnumber V61B511A-A319L Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface L Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20405](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20405/): ManufacturePartnumber V61B511A-A319J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A318L G1/4 Voltage 110/120 V AC SKU: 903015-20404](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a318l-g1-4-voltage-110-120-v-ac-sku-903015-20404/): ManufacturePartnumber V61B511A-A318L Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface L Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A318J G1/4 Voltage 110/120 V AC SKU: 903015-20403](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a318j-g1-4-voltage-110-120-v-ac-sku-903015-20403/): ManufacturePartnumber V61B511A-A318J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A314J G1/4 Voltage 24 V AC SKU: 903015-20402](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a314j-g1-4-voltage-24-v-ac-sku-903015-20402/): ManufacturePartnumber V61B511A-A314J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A313L G1/4 Voltage 24 V DC (old product no. 85042811) SKU: 903015-20401](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a313l-g1-4-voltage-24-v-dc-old-product-no-85042811-sku-903015-20401/): ManufacturePartnumber V61B511A-A313L Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A313J G1/4 Voltage 24 V DC SKU: 903015-20400](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a313j-g1-4-voltage-24-v-dc-sku-903015-20400/): ManufacturePartnumber V61B511A-A313J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A312J G1/4 Voltage 12 V DC SKU: 903015-20399](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a312j-g1-4-voltage-12-v-dc-sku-903015-20399/): ManufacturePartnumber V61B511A-A312J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20398](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20398/): ManufacturePartnumber V61B511A-A219J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A218L G1/4 Voltage 110/120 V AC SKU: 903015-20397](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a218l-g1-4-voltage-110-120-v-ac-sku-903015-20397/): ManufacturePartnumber V61B511A-A218L Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20396](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20396/): ManufacturePartnumber V61B511A-A218J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A214J G1/4 Voltage 24 V AC SKU: 903015-20395](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a214j-g1-4-voltage-24-v-ac-sku-903015-20395/): ManufacturePartnumber V61B511A-A214J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A213L G1/4 Voltage 24 V DC SKU: 903015-20394](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a213l-g1-4-voltage-24-v-dc-sku-903015-20394/): ManufacturePartnumber V61B511A-A213L Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A213J G1/4 Voltage 24 V DC SKU: 903015-20393](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a213j-g1-4-voltage-24-v-dc-sku-903015-20393/): ManufacturePartnumber V61B511A-A213J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A212J G1/4 Voltage 12 V DC SKU: 903015-20392](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a212j-g1-4-voltage-12-v-dc-sku-903015-20392/): ManufacturePartnumber V61B511A-A212J Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61B511A-A113L G1/4 Voltage 24 V DC SKU: 903015-20391](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61b511a-a113l-g1-4-voltage-24-v-dc-sku-903015-20391/): ManufacturePartnumber V61B511A-A113L Function – Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1300 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 1 Plug Interface L Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,42 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B427A-A213J G1/4 Voltage 24 V DC SKU: 903015-20390](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b427a-a213j-g1-4-voltage-24-v-dc-sku-903015-20390/): ManufacturePartnumber V61B427A-A213J Function NC Actuation Sol/spring External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B423A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20389](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b423a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20389/): ManufacturePartnumber V61B423A-A319J Function NC Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B423A-A314J G1/4 Voltage 24 V AC SKU: 903015-20388](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b423a-a314j-g1-4-voltage-24-v-ac-sku-903015-20388/): ManufacturePartnumber V61B423A-A314J Function NC Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B423A-A313J G1/4 Voltage 24 V DC SKU: 903015-20387](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b423a-a313j-g1-4-voltage-24-v-dc-sku-903015-20387/): ManufacturePartnumber V61B423A-A313J Function NC Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B423A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20386](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b423a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20386/): ManufacturePartnumber V61B423A-A219J Function NC Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B423A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20385](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b423a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20385/): ManufacturePartnumber V61B423A-A218J Function NC Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61B423A-A213L G1/4 Voltage 24 V DC SKU: 903015-20384](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61b423a-a213l-g1-4-voltage-24-v-dc-sku-903015-20384/): ManufacturePartnumber V61B423A-A213L Function NC Actuation Sol/air External Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 132,5 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane timing belt AT5 width 32mm Lw 1125mm 225 teeth 32 AT5/1125 SKU: 16687023](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-1125mm-225-teeth-32-at5-1125-sku-16687023/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 1050mm 210 teeth 32 AT5/1050 SKU: 16687022](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-1050mm-210-teeth-32-at5-1050-sku-16687022/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 975mm 195 teeth 32 AT5/975 SKU: 16687021](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-975mm-195-teeth-32-at5-975-sku-16687021/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 825mm 165 teeth 32 AT5/825 SKU: 16687020](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-825mm-165-teeth-32-at5-825-sku-16687020/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 780mm 156 teeth 32 AT5/780 SKU: 16687019](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-780mm-156-teeth-32-at5-780-sku-16687019/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 750mm 150 teeth 32 AT5/750 SKU: 16687018](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-750mm-150-teeth-32-at5-750-sku-16687018/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 720mm 144 teeth 32 AT5/720 SKU: 16687017](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-720mm-144-teeth-32-at5-720-sku-16687017/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 660mm 132 teeth 32 AT5/660 SKU: 16687016](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-660mm-132-teeth-32-at5-660-sku-16687016/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 630mm 126 teeth 32 AT5/630 SKU: 16687015](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-630mm-126-teeth-32-at5-630-sku-16687015/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 610mm 122 teeth 32 AT5/610 SKU: 16687014](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-610mm-122-teeth-32-at5-610-sku-16687014/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 600mm 120 teeth 32 AT5/600 SKU: 16687013](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-600mm-120-teeth-32-at5-600-sku-16687013/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 545mm 109 teeth 32 AT5/545 SKU: 16687012](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-545mm-109-teeth-32-at5-545-sku-16687012/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 500mm 100 teeth 32 AT5/500 SKU: 16687011](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-500mm-100-teeth-32-at5-500-sku-16687011/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 455mm 91 teeth 32 AT5/455 SKU: 16687010](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-455mm-91-teeth-32-at5-455-sku-16687010/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 420mm 84 teeth 32 AT5/420 SKU: 16687009](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-420mm-84-teeth-32-at5-420-sku-16687009/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 390 78 teeth 32 AT5/390 SKU: 16687008](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-390-78-teeth-32-at5-390-sku-16687008/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 375mm 75 teeth 32 AT5/375 SKU: 16687007](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-375mm-75-teeth-32-at5-375-sku-16687007/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 340mm 68 teeth 32 AT5/340 SKU: 16687006](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-340mm-68-teeth-32-at5-340-sku-16687006/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 300mm 60 teeth 32 AT5/300 SKU: 16687005](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-300mm-60-teeth-32-at5-300-sku-16687005/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm Lw 280mm 56 teeth 32 AT5/280 SKU: 16687004](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-280mm-56-teeth-32-at5-280-sku-16687004/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 32mm 32AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16687001](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-32at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16687001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 32mm 32 AT5 open length with tensile members from steel packed 2 x 16mm SKU: 16687000](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-32-at5-open-length-with-tensile-members-from-steel-packed-2-x-16mm-sku-16687000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT5 width 25mm Lw 1500mm 300 teeth 25 AT5/1500 SKU: 16682400](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-1500mm-300-teeth-25-at5-1500-sku-16682400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 1125mm 225 teeth 25 AT5/1125 SKU: 16682300](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-1125mm-225-teeth-25-at5-1125-sku-16682300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 1050mm 210 teeth 25 AT5/1050 SKU: 16682200](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-1050mm-210-teeth-25-at5-1050-sku-16682200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 975mm 195 teeth 25 AT5/975 SKU: 16682100](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-975mm-195-teeth-25-at5-975-sku-16682100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 825mm 165 teeth 25 AT5/825 SKU: 16682000](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-825mm-165-teeth-25-at5-825-sku-16682000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 780mm 156 teeth 25 AT5/780 SKU: 16681900](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-780mm-156-teeth-25-at5-780-sku-16681900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 750mm 150 teeth 25 AT5/750 SKU: 16681800](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-750mm-150-teeth-25-at5-750-sku-16681800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 720mm 144 teeth 25 AT5/720 SKU: 16681700](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-720mm-144-teeth-25-at5-720-sku-16681700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 660mm 132 teeth 25 AT5/660 SKU: 16681600](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-660mm-132-teeth-25-at5-660-sku-16681600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 630mm 126 teeth 25 AT5/630 SKU: 16681500](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-630mm-126-teeth-25-at5-630-sku-16681500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 610mm 122 teeth 25 AT5/610 SKU: 16681400](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-610mm-122-teeth-25-at5-610-sku-16681400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 600mm 120 teeth 25 AT5/600 SKU: 16681300](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-600mm-120-teeth-25-at5-600-sku-16681300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 545mm 109 teeth 25 AT5/545 SKU: 16681200](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-545mm-109-teeth-25-at5-545-sku-16681200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 500mm 100 teeth 25 AT5/500 SKU: 16681100](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-500mm-100-teeth-25-at5-500-sku-16681100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 455mm 91 teeth 25 AT5/455 SKU: 16681000](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-455mm-91-teeth-25-at5-455-sku-16681000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 420mm 84 teeth 25 AT5/420 SKU: 16680900](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-420mm-84-teeth-25-at5-420-sku-16680900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 390mm 78 teeth 25 AT5/390 SKU: 16680800](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-390mm-78-teeth-25-at5-390-sku-16680800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 375mm 75 teeth 25 AT5/375 SKU: 16680700](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-375mm-75-teeth-25-at5-375-sku-16680700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 340mm 68 teeth 25 AT5/340 SKU: 16680600](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-340mm-68-teeth-25-at5-340-sku-16680600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 300mm 60 teeth 25 AT5/300 SKU: 16680500](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-300mm-60-teeth-25-at5-300-sku-16680500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 280mm 56 teeth 25 AT5/280 SKU: 16680400](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-280mm-56-teeth-25-at5-280-sku-16680400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 275mm 55 teeth 25 AT5/275 SKU: 16680300](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-275mm-55-teeth-25-at5-275-sku-16680300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 255mm 51 teeth 25 AT5/255 SKU: 16680200](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-255mm-51-teeth-25-at5-255-sku-16680200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm Lw 225mm 45 teeth 25 AT5/225 SKU: 16680100](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-lw-225mm-45-teeth-25-at5-225-sku-16680100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 25mm 25AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16680001](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-25at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16680001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 25mm 25AT5 open length SKU: 16680000](https://maedler.in/product/polyurethane-timing-belt-at5-width-25mm-25at5-open-length-sku-16680000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT5 belt width 16mm SKU: 16679900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-16mm-sku-16679900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Timing belt pulley steel AT5 112 teeth belt width 25mm for taper bush 2012 SKU: 16677494](https://maedler.in/product/timing-belt-pulley-steel-at5-112-teeth-belt-width-25mm-for-taper-bush-2012-sku-16677494/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 96 teeth belt width 25mm for taper bush 2012 SKU: 16677492](https://maedler.in/product/timing-belt-pulley-steel-at5-96-teeth-belt-width-25mm-for-taper-bush-2012-sku-16677492/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 90 teeth belt width 25mm for taper bush 1610 SKU: 16677490](https://maedler.in/product/timing-belt-pulley-steel-at5-90-teeth-belt-width-25mm-for-taper-bush-1610-sku-16677490/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 84 teeth belt width 25mm for taper bush 1610 SKU: 16677484](https://maedler.in/product/timing-belt-pulley-steel-at5-84-teeth-belt-width-25mm-for-taper-bush-1610-sku-16677484/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 80 teeth belt width 25mm for taper bush 1610 SKU: 16677480](https://maedler.in/product/timing-belt-pulley-steel-at5-80-teeth-belt-width-25mm-for-taper-bush-1610-sku-16677480/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 72 teeth belt width 25mm for taper bush 1610 SKU: 16677472](https://maedler.in/product/timing-belt-pulley-steel-at5-72-teeth-belt-width-25mm-for-taper-bush-1610-sku-16677472/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 64 teeth belt width 25mm for taper bush 1210 SKU: 16677464](https://maedler.in/product/timing-belt-pulley-steel-at5-64-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677464/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 60 teeth belt width 25mm for taper bush 1210 SKU: 16677460](https://maedler.in/product/timing-belt-pulley-steel-at5-60-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677460/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 56 teeth belt width 25mm for taper bush 1210 SKU: 16677456](https://maedler.in/product/timing-belt-pulley-steel-at5-56-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677456/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 48 teeth belt width 25mm for taper bush 1210 SKU: 16677448](https://maedler.in/product/timing-belt-pulley-steel-at5-48-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677448/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 44 teeth belt width 25mm for taper bush 1210 SKU: 16677444](https://maedler.in/product/timing-belt-pulley-steel-at5-44-teeth-belt-width-25mm-for-taper-bush-1210-sku-16677444/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 40 teeth belt width 25mm for taper bush 1108 SKU: 16677440](https://maedler.in/product/timing-belt-pulley-steel-at5-40-teeth-belt-width-25mm-for-taper-bush-1108-sku-16677440/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 38 teeth belt width 25mm for taper bush 1108 SKU: 16677438](https://maedler.in/product/timing-belt-pulley-steel-at5-38-teeth-belt-width-25mm-for-taper-bush-1108-sku-16677438/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 36 teeth belt width 25mm for taper bush 1108 SKU: 16677436](https://maedler.in/product/timing-belt-pulley-steel-at5-36-teeth-belt-width-25mm-for-taper-bush-1108-sku-16677436/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 34 teeth belt width 25mm for taper bush 1008 SKU: 16677434](https://maedler.in/product/timing-belt-pulley-steel-at5-34-teeth-belt-width-25mm-for-taper-bush-1008-sku-16677434/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 112 teeth belt width 16mm for taper bush 2012 SKU: 16677394](https://maedler.in/product/timing-belt-pulley-steel-at5-112-teeth-belt-width-16mm-for-taper-bush-2012-sku-16677394/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 96 teeth belt width 16mm for taper bush 2012 SKU: 16677392](https://maedler.in/product/timing-belt-pulley-steel-at5-96-teeth-belt-width-16mm-for-taper-bush-2012-sku-16677392/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 90 teeth belt width 16mm for taper bush 1610 SKU: 16677390](https://maedler.in/product/timing-belt-pulley-steel-at5-90-teeth-belt-width-16mm-for-taper-bush-1610-sku-16677390/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 84 teeth belt width 16mm for taper bush 1610 SKU: 16677384](https://maedler.in/product/timing-belt-pulley-steel-at5-84-teeth-belt-width-16mm-for-taper-bush-1610-sku-16677384/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 80 teeth belt width 16mm for taper bush 1610 SKU: 16677380](https://maedler.in/product/timing-belt-pulley-steel-at5-80-teeth-belt-width-16mm-for-taper-bush-1610-sku-16677380/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 72 teeth belt width 16mm for taper bush 1610 SKU: 16677372](https://maedler.in/product/timing-belt-pulley-steel-at5-72-teeth-belt-width-16mm-for-taper-bush-1610-sku-16677372/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 64 teeth belt width 16mm for taper bush 1210 SKU: 16677364](https://maedler.in/product/timing-belt-pulley-steel-at5-64-teeth-belt-width-16mm-for-taper-bush-1210-sku-16677364/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 60 teeth belt width 16mm for taper bush 1210 SKU: 16677360](https://maedler.in/product/timing-belt-pulley-steel-at5-60-teeth-belt-width-16mm-for-taper-bush-1210-sku-16677360/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 56 teeth belt width 16mm for taper bush 1210 SKU: 16677356](https://maedler.in/product/timing-belt-pulley-steel-at5-56-teeth-belt-width-16mm-for-taper-bush-1210-sku-16677356/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 48 teeth belt width 16mm for taper bush 1210 SKU: 16677348](https://maedler.in/product/timing-belt-pulley-steel-at5-48-teeth-belt-width-16mm-for-taper-bush-1210-sku-16677348/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 44 teeth belt width 16mm for taper bush 1108 SKU: 16677344](https://maedler.in/product/timing-belt-pulley-steel-at5-44-teeth-belt-width-16mm-for-taper-bush-1108-sku-16677344/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 40 teeth belt width 16mm for taper bush 1108 SKU: 16677340](https://maedler.in/product/timing-belt-pulley-steel-at5-40-teeth-belt-width-16mm-for-taper-bush-1108-sku-16677340/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 38 teeth belt width 16mm for taper bush 1108 SKU: 16677338](https://maedler.in/product/timing-belt-pulley-steel-at5-38-teeth-belt-width-16mm-for-taper-bush-1108-sku-16677338/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 36 teeth belt width 16mm for taper bush 1108 SKU: 16677336](https://maedler.in/product/timing-belt-pulley-steel-at5-36-teeth-belt-width-16mm-for-taper-bush-1108-sku-16677336/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley steel AT5 34 teeth belt width 16mm for taper bush 1008 SKU: 16677334](https://maedler.in/product/timing-belt-pulley-steel-at5-34-teeth-belt-width-16mm-for-taper-bush-1008-sku-16677334/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt AT5 width 16mm Lw 1500mm 300 teeth 16 AT5/1500 SKU: 16672400](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-1500mm-300-teeth-16-at5-1500-sku-16672400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 1125mm 225 teeth 16 AT5/1125 SKU: 16672300](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-1125mm-225-teeth-16-at5-1125-sku-16672300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 1050mm 210 teeth 16 AT5/1050 SKU: 16672200](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-1050mm-210-teeth-16-at5-1050-sku-16672200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 975mm 195 teeth 16 AT5/975 SKU: 16672100](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-975mm-195-teeth-16-at5-975-sku-16672100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 825mm 165 teeth 16 AT5/825 SKU: 16672000](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-825mm-165-teeth-16-at5-825-sku-16672000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 780mm 156 teeth 16 AT5/780 SKU: 16671900](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-780mm-156-teeth-16-at5-780-sku-16671900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 750mm 150 teeth 16 AT5/750 SKU: 16671800](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-750mm-150-teeth-16-at5-750-sku-16671800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 720mm 144 teeth 16 AT5/720 SKU: 16671700](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-720mm-144-teeth-16-at5-720-sku-16671700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 660mm 132 teeth 16 AT5/660 SKU: 16671600](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-660mm-132-teeth-16-at5-660-sku-16671600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 630mm 126 teeth 16 AT5/630 SKU: 16671500](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-630mm-126-teeth-16-at5-630-sku-16671500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 610mm 122 teeth 16 AT5/610 SKU: 16671400](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-610mm-122-teeth-16-at5-610-sku-16671400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 600mm 120 teeth 16 AT5/600 SKU: 16671300](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-600mm-120-teeth-16-at5-600-sku-16671300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 545mm 109 teeth 16 AT5/545 SKU: 16671200](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-545mm-109-teeth-16-at5-545-sku-16671200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 500mm 100 teeth 16 AT5/500 SKU: 16671100](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-500mm-100-teeth-16-at5-500-sku-16671100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 455mm 91 teeth 16 AT5/455 SKU: 16671000](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-455mm-91-teeth-16-at5-455-sku-16671000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 420mm 84 teeth 16 AT5/420 SKU: 16670900](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-420mm-84-teeth-16-at5-420-sku-16670900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 390mm 78 teeth 16 AT5/390 SKU: 16670800](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-390mm-78-teeth-16-at5-390-sku-16670800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 375mm 75 teeth 16 AT5/375 SKU: 16670700](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-375mm-75-teeth-16-at5-375-sku-16670700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 340mm 68 teeth 16 AT5/340 SKU: 16670600](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-340mm-68-teeth-16-at5-340-sku-16670600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 300mm 60 teeth 16 AT5/300 SKU: 16670500](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-300mm-60-teeth-16-at5-300-sku-16670500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT5 width 16mm Lw 280mm 56 teeth 16 AT5/280 SKU: 16670400](https://maedler.in/product/polyurethane-timing-belt-at5-width-16mm-lw-280mm-56-teeth-16-at5-280-sku-16670400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [3/2-directional control valve solenoid actuated Norgren V62S427A-A313J 3/8 NPT Voltage 24 V DC SKU: 903015-20595](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62s427a-a313j-3-8-npt-voltage-24-v-dc-sku-903015-20595/): ManufacturePartnumber V62S427A-A313J Function NC Actuation Sol/spring External Port Size 3/8 NPT Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 166,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61R517A-A318J 1/4 NPT Voltage 110/120 V AC SKU: 903015-20593](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61r517a-a318j-1-4-npt-voltage-110-120-v-ac-sku-903015-20593/): ManufacturePartnumber V61R517A-A318J Function – Actuation Sol/spring Internal Port Size 1/4 NPT Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61R517A-A313J 1/4 NPT Voltage 24 V DC SKU: 903015-20592](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61r517a-a313j-1-4-npt-voltage-24-v-dc-sku-903015-20592/): ManufacturePartnumber V61R517A-A313J Function – Actuation Sol/spring Internal Port Size 1/4 NPT Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V61R517A-A213J 1/4 NPT Voltage 24 V DC SKU: 903015-20589](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v61r517a-a213j-1-4-npt-voltage-24-v-dc-sku-903015-20589/): ManufacturePartnumber V61R517A-A213J Function – Actuation Sol/spring Internal Port Size 1/4 NPT Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 167 Width [mm] 25 Height [mm] 40 Weight [kg] 0,33 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V61R417A-A218J 1/4 NPT Voltage 110/120 V AC SKU: 903015-20587](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v61r417a-a218j-1-4-npt-voltage-110-120-v-ac-sku-903015-20587/): ManufacturePartnumber V61R417A-A218J Function NC Actuation Sol/spring Internal Port Size 1/4 NPT Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 25 Height [mm] 40 Weight [kg] 0,29 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60P517A-A218J 1/8 NPT Voltage 110/120 V AC SKU: 903015-20582](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60p517a-a218j-1-8-npt-voltage-110-120-v-ac-sku-903015-20582/): ManufacturePartnumber V60P517A-A218J Function – Actuation Sol/spring Internal Port Size 1/8 NPT Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V60P517A-A213J 1/8 NPT Voltage 24 V DC SKU: 903015-20581](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v60p517a-a213j-1-8-npt-voltage-24-v-dc-sku-903015-20581/): ManufacturePartnumber V60P517A-A213J Function – Actuation Sol/spring Internal Port Size 1/8 NPT Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 140 Width [mm] 22 Height [mm] 35 Weight [kg] 0,24 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V62CA11A-A313J G3/8 Voltage 24 V DC SKU: 903015-20579](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v62ca11a-a313j-g3-8-voltage-24-v-dc-sku-903015-20579/): ManufacturePartnumber V62CA11A-A313J Function NC/NC Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,73 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V62CA11A-A213J G3/8 Voltage 24 V DC SKU: 903015-20578](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v62ca11a-a213j-g3-8-voltage-24-v-dc-sku-903015-20578/): ManufacturePartnumber V62CA11A-A213J Function NC/NC Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,73 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C811A-A313J G3/8 Voltage 24 V DC SKU: 903015-20577](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c811a-a313j-g3-8-voltage-24-v-dc-sku-903015-20577/): ManufacturePartnumber V62C811A-A313J Function COP Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C811A-A213J G3/8 Voltage 24 V DC SKU: 903015-20576](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c811a-a213j-g3-8-voltage-24-v-dc-sku-903015-20576/): ManufacturePartnumber V62C811A-A213J Function COP Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C722A-A213J G3/8 Voltage 24 V DC SKU: 903015-20575](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c722a-a213j-g3-8-voltage-24-v-dc-sku-903015-20575/): ManufacturePartnumber V62C722A-A213J Function COE Actuation Sol/Sol External Port Size G3/8 Flow Rate 1900 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C711A-A319J G3/8 Voltage 220/240 V AC SKU: 903015-20574](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c711a-a319j-g3-8-voltage-220-240-v-ac-sku-903015-20574/): ManufacturePartnumber V62C711A-A319J Function COE Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C711A-A313J G3/8 Voltage 24 V DC SKU: 903015-20573](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c711a-a313j-g3-8-voltage-24-v-dc-sku-903015-20573/): ManufacturePartnumber V62C711A-A313J Function COE Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C711A-A219J G3/8 Voltage 220/240 V AC SKU: 903015-20572](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c711a-a219j-g3-8-voltage-220-240-v-ac-sku-903015-20572/): ManufacturePartnumber V62C711A-A219J Function COE Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C711A-A218J G3/8 Voltage 110/120 V AC SKU: 903015-20571](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c711a-a218j-g3-8-voltage-110-120-v-ac-sku-903015-20571/): ManufacturePartnumber V62C711A-A218J Function COE Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C711A-A213J G3/8 Voltage 24 V DC SKU: 903015-20570](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c711a-a213j-g3-8-voltage-24-v-dc-sku-903015-20570/): ManufacturePartnumber V62C711A-A213J Function COE Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C622A-A313J G3/8 Voltage 24 V DC SKU: 903015-20569](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c622a-a313j-g3-8-voltage-24-v-dc-sku-903015-20569/): ManufacturePartnumber V62C622A-A313J Function APB Actuation Sol/Sol External Port Size G3/8 Flow Rate 1900 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C622A-A213J G3/8 Voltage 24 V DC SKU: 903015-20568](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c622a-a213j-g3-8-voltage-24-v-dc-sku-903015-20568/): ManufacturePartnumber V62C622A-A213J Function APB Actuation Sol/Sol External Port Size G3/8 Flow Rate 1900 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C611A-A319J G3/8 Voltage 220/240 V AC SKU: 903015-20567](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c611a-a319j-g3-8-voltage-220-240-v-ac-sku-903015-20567/): ManufacturePartnumber V62C611A-A319J Function APB Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C611A-A314J G3/8 Voltage 24 V AC SKU: 903015-20566](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c611a-a314j-g3-8-voltage-24-v-ac-sku-903015-20566/): ManufacturePartnumber V62C611A-A314J Function APB Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C611A-A313L G3/8 Voltage 24 V DC SKU: 903015-20565](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c611a-a313l-g3-8-voltage-24-v-dc-sku-903015-20565/): ManufacturePartnumber V62C611A-A313L Function APB Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C611A-A313J G3/8 Voltage 24 V DC SKU: 903015-20564](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c611a-a313j-g3-8-voltage-24-v-dc-sku-903015-20564/): ManufacturePartnumber V62C611A-A313J Function APB Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C611A-A219J G3/8 Voltage 220/240 V AC SKU: 903015-20563](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c611a-a219j-g3-8-voltage-220-240-v-ac-sku-903015-20563/): ManufacturePartnumber V62C611A-A219J Function APB Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C611A-A218L G3/8 Voltage 110/120 V AC SKU: 903015-20562](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c611a-a218l-g3-8-voltage-110-120-v-ac-sku-903015-20562/): ManufacturePartnumber V62C611A-A218L Function APB Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C611A-A218J G3/8 Voltage 110/120 V AC SKU: 903015-20561](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c611a-a218j-g3-8-voltage-110-120-v-ac-sku-903015-20561/): ManufacturePartnumber V62C611A-A218J Function APB Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C611A-A213L G3/8 Voltage 24 V DC SKU: 903015-20559](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c611a-a213l-g3-8-voltage-24-v-dc-sku-903015-20559/): ManufacturePartnumber V62C611A-A213L Function APB Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V62C611A-A213J G3/8 Voltage 24 V DC SKU: 903015-20558](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v62c611a-a213j-g3-8-voltage-24-v-dc-sku-903015-20558/): ManufacturePartnumber V62C611A-A213J Function APB Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 240,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,81 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C527A-A213J G3/8 Voltage 24 V DC SKU: 903015-20557](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c527a-a213j-g3-8-voltage-24-v-dc-sku-903015-20557/): ManufacturePartnumber V62C527A-A213J Function – Actuation Sol/spring External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 191 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C523A-A313J G3/8 Voltage 24 V DC SKU: 903015-20556](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c523a-a313j-g3-8-voltage-24-v-dc-sku-903015-20556/): ManufacturePartnumber V62C523A-A313J Function – Actuation Sol/air External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C523A-A213L G3/8 Voltage 24 V DC SKU: 903015-20555](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c523a-a213l-g3-8-voltage-24-v-dc-sku-903015-20555/): ManufacturePartnumber V62C523A-A213L Function – Actuation Sol/air External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C523A-A213J G3/8 Voltage 24 V DC SKU: 903015-20554](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c523a-a213j-g3-8-voltage-24-v-dc-sku-903015-20554/): ManufacturePartnumber V62C523A-A213J Function – Actuation Sol/air External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C522A-A313J G3/8 Voltage 24 V DC SKU: 903015-20553](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c522a-a313j-g3-8-voltage-24-v-dc-sku-903015-20553/): ManufacturePartnumber V62C522A-A313J Function – Actuation Sol/Sol External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C522A-A219J G3/8 Voltage 220/240 V AC SKU: 903015-20552](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c522a-a219j-g3-8-voltage-220-240-v-ac-sku-903015-20552/): ManufacturePartnumber V62C522A-A219J Function – Actuation Sol/Sol External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C522A-A213J G3/8 Voltage 24 V DC SKU: 903015-20551](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c522a-a213j-g3-8-voltage-24-v-dc-sku-903015-20551/): ManufacturePartnumber V62C522A-A213J Function – Actuation Sol/Sol External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C517A-A319J G3/8 Voltage 220/240 V AC SKU: 903015-20550](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c517a-a319j-g3-8-voltage-220-240-v-ac-sku-903015-20550/): ManufacturePartnumber V62C517A-A319J Function – Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 191 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C517A-A318J G3/8 Voltage 110/120 V AC SKU: 903015-20549](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c517a-a318j-g3-8-voltage-110-120-v-ac-sku-903015-20549/): ManufacturePartnumber V62C517A-A318J Function – Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 191 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C517A-A313J G3/8 Voltage 24 V DC SKU: 903015-20548](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c517a-a313j-g3-8-voltage-24-v-dc-sku-903015-20548/): ManufacturePartnumber V62C517A-A313J Function – Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 191 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C517A-A219J G3/8 Voltage 220/240 V AC SKU: 903015-20547](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c517a-a219j-g3-8-voltage-220-240-v-ac-sku-903015-20547/): ManufacturePartnumber V62C517A-A219J Function – Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 191 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C517A-A218J G3/8 Voltage 110/120 V AC SKU: 903015-20546](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c517a-a218j-g3-8-voltage-110-120-v-ac-sku-903015-20546/): ManufacturePartnumber V62C517A-A218J Function – Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 191 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C517A-A213J G3/8 Voltage 24 V DC SKU: 903015-20545](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c517a-a213j-g3-8-voltage-24-v-dc-sku-903015-20545/): ManufacturePartnumber V62C517A-A213J Function – Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 191 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C517A-A113J G3/8 Voltage 24 V DC SKU: 903015-20544](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c517a-a113j-g3-8-voltage-24-v-dc-sku-903015-20544/): ManufacturePartnumber V62C517A-A113J Function – Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 1 Plug Interface J Length [mm] 191 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A319J G3/8 Voltage 220/240 V AC SKU: 903015-20543](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a319j-g3-8-voltage-220-240-v-ac-sku-903015-20543/): ManufacturePartnumber V62C513A-A319J Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A314J G3/8 Voltage 24 V AC SKU: 903015-20542](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a314j-g3-8-voltage-24-v-ac-sku-903015-20542/): ManufacturePartnumber V62C513A-A314J Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A313J G3/8 Voltage 24 V DC SKU: 903015-20541](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a313j-g3-8-voltage-24-v-dc-sku-903015-20541/): ManufacturePartnumber V62C513A-A313J Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A312J G3/8 Voltage 12 V DC SKU: 903015-20540](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a312j-g3-8-voltage-12-v-dc-sku-903015-20540/): ManufacturePartnumber V62C513A-A312J Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A219L G3/8 Voltage 220/240 V AC SKU: 903015-20539](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a219l-g3-8-voltage-220-240-v-ac-sku-903015-20539/): ManufacturePartnumber V62C513A-A219L Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A219J G3/8 Voltage 220/240 V AC SKU: 903015-20538](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a219j-g3-8-voltage-220-240-v-ac-sku-903015-20538/): ManufacturePartnumber V62C513A-A219J Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A218L G3/8 Voltage 110/120 V AC SKU: 903015-20537](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a218l-g3-8-voltage-110-120-v-ac-sku-903015-20537/): ManufacturePartnumber V62C513A-A218L Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A218J G3/8 Voltage 110/120 V AC SKU: 903015-20536](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a218j-g3-8-voltage-110-120-v-ac-sku-903015-20536/): ManufacturePartnumber V62C513A-A218J Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A214J G3/8 Voltage 24 V AC SKU: 903015-20535](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a214j-g3-8-voltage-24-v-ac-sku-903015-20535/): ManufacturePartnumber V62C513A-A214J Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A213L G3/8 Voltage 24 V DC SKU: 903015-20534](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a213l-g3-8-voltage-24-v-dc-sku-903015-20534/): ManufacturePartnumber V62C513A-A213L Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C513A-A213J G3/8 Voltage 24 V DC SKU: 903015-20533](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c513a-a213j-g3-8-voltage-24-v-dc-sku-903015-20533/): ManufacturePartnumber V62C513A-A213J Function – Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 171,50 Width [mm] 34 Height [mm] 55 Weight [kg] 0,62 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A319L G3/8 Voltage 220/240 V AC SKU: 903015-20532](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a319l-g3-8-voltage-220-240-v-ac-sku-903015-20532/): ManufacturePartnumber V62C511A-A319L Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface L Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A319J G3/8 Voltage 220/240 V AC SKU: 903015-20531](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a319j-g3-8-voltage-220-240-v-ac-sku-903015-20531/): ManufacturePartnumber V62C511A-A319J Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A318L G3/8 Voltage 110/120 V AC SKU: 903015-20530](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a318l-g3-8-voltage-110-120-v-ac-sku-903015-20530/): ManufacturePartnumber V62C511A-A318L Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface L Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A318J G3/8 Voltage 110/120 V AC SKU: 903015-20529](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a318j-g3-8-voltage-110-120-v-ac-sku-903015-20529/): ManufacturePartnumber V62C511A-A318J Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A314J G3/8 Voltage 24 V AC SKU: 903015-20528](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a314j-g3-8-voltage-24-v-ac-sku-903015-20528/): ManufacturePartnumber V62C511A-A314J Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A313L G3/8 Voltage 24 V DC SKU: 903015-20527](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a313l-g3-8-voltage-24-v-dc-sku-903015-20527/): ManufacturePartnumber V62C511A-A313L Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A313J G3/8 Voltage 24 V DC SKU: 903015-20526](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a313j-g3-8-voltage-24-v-dc-sku-903015-20526/): ManufacturePartnumber V62C511A-A313J Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A219L G3/8 Voltage 220/240 V AC SKU: 903015-20525](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a219l-g3-8-voltage-220-240-v-ac-sku-903015-20525/): ManufacturePartnumber V62C511A-A219L Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A219J G3/8 Voltage 220/240 V AC SKU: 903015-20524](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a219j-g3-8-voltage-220-240-v-ac-sku-903015-20524/): ManufacturePartnumber V62C511A-A219J Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A218J G3/8 Voltage 110/120 V AC SKU: 903015-20523](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a218j-g3-8-voltage-110-120-v-ac-sku-903015-20523/): ManufacturePartnumber V62C511A-A218J Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A213L G3/8 Voltage 24 V DC SKU: 903015-20522](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a213l-g3-8-voltage-24-v-dc-sku-903015-20522/): ManufacturePartnumber V62C511A-A213L Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62C511A-A213J G3/8 Voltage 24 V DC SKU: 903015-20521](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62c511a-a213j-g3-8-voltage-24-v-dc-sku-903015-20521/): ManufacturePartnumber V62C511A-A213J Function – Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C423A-A313J G3/8 Voltage 24 V DC SKU: 903015-20520](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c423a-a313j-g3-8-voltage-24-v-dc-sku-903015-20520/): ManufacturePartnumber V62C423A-A313J Function NC Actuation Sol/air External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C423A-A213J G3/8 Voltage 24 V DC SKU: 903015-20519](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c423a-a213j-g3-8-voltage-24-v-dc-sku-903015-20519/): ManufacturePartnumber V62C423A-A213J Function NC Actuation Sol/air External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C417A-A319J G3/8 Voltage 220/240 V AC SKU: 903015-20518](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c417a-a319j-g3-8-voltage-220-240-v-ac-sku-903015-20518/): ManufacturePartnumber V62C417A-A319J Function NC Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 166,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C417A-A318J G3/8 Voltage 110/120 V AC SKU: 903015-20517](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c417a-a318j-g3-8-voltage-110-120-v-ac-sku-903015-20517/): ManufacturePartnumber V62C417A-A318J Function NC Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 166,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C417A-A313J G3/8 Voltage 24 V DC SKU: 903015-20516](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c417a-a313j-g3-8-voltage-24-v-dc-sku-903015-20516/): ManufacturePartnumber V62C417A-A313J Function NC Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 166,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C417A-A219J G3/8 Voltage 220/240 V AC SKU: 903015-20515](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c417a-a219j-g3-8-voltage-220-240-v-ac-sku-903015-20515/): ManufacturePartnumber V62C417A-A219J Function NC Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 166,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C417A-A218J G3/8 Voltage 110/120 V AC SKU: 903015-20514](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c417a-a218j-g3-8-voltage-110-120-v-ac-sku-903015-20514/): ManufacturePartnumber V62C417A-A218J Function NC Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 166,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C417A-A213J G3/8 Voltage 24 V DC SKU: 903015-20513](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c417a-a213j-g3-8-voltage-24-v-dc-sku-903015-20513/): ManufacturePartnumber V62C417A-A213J Function NC Actuation Sol/spring Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 166,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C413A-A319J G3/8 Voltage 220/240 V AC SKU: 903015-20512](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c413a-a319j-g3-8-voltage-220-240-v-ac-sku-903015-20512/): ManufacturePartnumber V62C413A-A319J Function NC Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C413A-A313L G3/8 Voltage 24 V DC SKU: 903015-20511](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c413a-a313l-g3-8-voltage-24-v-dc-sku-903015-20511/): ManufacturePartnumber V62C413A-A313L Function NC Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C413A-A313J G3/8 Voltage 24 V DC SKU: 903015-20510](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c413a-a313j-g3-8-voltage-24-v-dc-sku-903015-20510/): ManufacturePartnumber V62C413A-A313J Function NC Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C413A-A312J G3/8 Voltage 12 V DC SKU: 903015-20509](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c413a-a312j-g3-8-voltage-12-v-dc-sku-903015-20509/): ManufacturePartnumber V62C413A-A312J Function NC Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C413A-A219J G3/8 Voltage 220/240 V AC SKU: 903015-20508](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c413a-a219j-g3-8-voltage-220-240-v-ac-sku-903015-20508/): ManufacturePartnumber V62C413A-A219J Function NC Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C413A-A218L G3/8 Voltage 110/120 V AC SKU: 903015-20507](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c413a-a218l-g3-8-voltage-110-120-v-ac-sku-903015-20507/): ManufacturePartnumber V62C413A-A218L Function NC Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C413A-A214J G3/8 Voltage 24 V AC SKU: 903015-20506](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c413a-a214j-g3-8-voltage-24-v-ac-sku-903015-20506/): ManufacturePartnumber V62C413A-A214J Function NC Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C413A-A213L G3/8 Voltage 24 V DC SKU: 903015-20505](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c413a-a213l-g3-8-voltage-24-v-dc-sku-903015-20505/): ManufacturePartnumber V62C413A-A213L Function NC Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C413A-A213J G3/8 Voltage 24 V DC SKU: 903015-20504](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c413a-a213j-g3-8-voltage-24-v-dc-sku-903015-20504/): ManufacturePartnumber V62C413A-A213J Function NC Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C411A-A313J G3/8 Voltage 24 V DC SKU: 903015-20503](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c411a-a313j-g3-8-voltage-24-v-dc-sku-903015-20503/): ManufacturePartnumber V62C411A-A313J Function NC Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 193,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,61 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C411A-A218J G3/8 Voltage 110/120 V AC SKU: 903015-20502](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c411a-a218j-g3-8-voltage-110-120-v-ac-sku-903015-20502/): ManufacturePartnumber V62C411A-A218J Function NC Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 193,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,61 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C411A-A213J G3/8 Voltage 24 V DC SKU: 903015-20501](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c411a-a213j-g3-8-voltage-24-v-dc-sku-903015-20501/): ManufacturePartnumber V62C411A-A213J Function NC Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 1,5 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 193,5 Width [mm] 34 Height [mm] 55 Weight [kg] 0,61 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C323A-A213L G3/8 Voltage 24 V DC SKU: 903015-20500](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c323a-a213l-g3-8-voltage-24-v-dc-sku-903015-20500/): ManufacturePartnumber V62C323A-A213L Function NO Actuation Sol/air External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C323A-A213J G3/8 Voltage 24 V DC SKU: 903015-20499](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c323a-a213j-g3-8-voltage-24-v-dc-sku-903015-20499/): ManufacturePartnumber V62C323A-A213J Function NO Actuation Sol/air External Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C313A-A313J G3/8 Voltage 24 V DC SKU: 903015-20498](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c313a-a313j-g3-8-voltage-24-v-dc-sku-903015-20498/): ManufacturePartnumber V62C313A-A313J Function NO Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V62C313A-A213J G3/8 Voltage 24 V DC SKU: 903015-20497](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v62c313a-a213j-g3-8-voltage-24-v-dc-sku-903015-20497/): ManufacturePartnumber V62C313A-A213J Function NO Actuation Sol/air Internal Port Size G3/8 Flow Rate 2600 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 147 Width [mm] 34 Height [mm] 55 Weight [kg] 0,52 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BA11A-A319J G1/4 Voltage 220/240 V AC SKU: 903015-20496](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61ba11a-a319j-g1-4-voltage-220-240-v-ac-sku-903015-20496/): ManufacturePartnumber V61BA11A-A319J Function NC/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BA11A-A318J G1/4 Voltage 110/120 V AC SKU: 903015-20495](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61ba11a-a318j-g1-4-voltage-110-120-v-ac-sku-903015-20495/): ManufacturePartnumber V61BA11A-A318J Function NC/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BA11A-A313L G1/4 Voltage 24 V DC SKU: 903015-20494](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61ba11a-a313l-g1-4-voltage-24-v-dc-sku-903015-20494/): ManufacturePartnumber V61BA11A-A313L Function NC/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BA11A-A313J G1/4 Voltage 24 V DC SKU: 903015-20493](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61ba11a-a313j-g1-4-voltage-24-v-dc-sku-903015-20493/): ManufacturePartnumber V61BA11A-A313J Function NC/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BA11A-A219L G1/4 Voltage 220/240 V AC SKU: 903015-20492](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61ba11a-a219l-g1-4-voltage-220-240-v-ac-sku-903015-20492/): ManufacturePartnumber V61BA11A-A219L Function NC/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BA11A-A219J G1/4 Voltage 220/240 V AC SKU: 903015-20491](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61ba11a-a219j-g1-4-voltage-220-240-v-ac-sku-903015-20491/): ManufacturePartnumber V61BA11A-A219J Function NC/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BA11A-A218J G1/4 Voltage 110/120 V AC SKU: 903015-20490](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61ba11a-a218j-g1-4-voltage-110-120-v-ac-sku-903015-20490/): ManufacturePartnumber V61BA11A-A218J Function NC/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BA11A-A213L G1/4 Voltage 24 V DC SKU: 903015-20489](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61ba11a-a213l-g1-4-voltage-24-v-dc-sku-903015-20489/): ManufacturePartnumber V61BA11A-A213L Function NC/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BA11A-A213J G1/4 Voltage 24 V DC SKU: 903015-20488](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61ba11a-a213j-g1-4-voltage-24-v-dc-sku-903015-20488/): ManufacturePartnumber V61BA11A-A213J Function NC/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B822A-A313J G1/4 Voltage 24 V DC SKU: 903015-20487](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b822a-a313j-g1-4-voltage-24-v-dc-sku-903015-20487/): ManufacturePartnumber V61B822A-A313J Function COP Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve solenoid actuated Norgren V61B822A-A213J G1/4 Voltage 24 V DC SKU: 903015-20486](https://maedler.in/product/5-3-directional-control-valve-solenoid-actuated-norgren-v61b822a-a213j-g1-4-voltage-24-v-dc-sku-903015-20486/): ManufacturePartnumber V61B822A-A213J Function COP Actuation Sol/Sol External Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 217 Width [mm] 25 Height [mm] 40 Weight [kg] 0,47 CATALOG PRODUCT PAGE CAD FILES (download) - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 25mm 40 AT10/20-2 SKU: 16832000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-25mm-40-at10-20-2-sku-16832000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 25mm 40 AT10/19-2 SKU: 16831900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-25mm-40-at10-19-2-sku-16831900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 25mm 40 AT10/18-2 SKU: 16831800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-25mm-40-at10-18-2-sku-16831800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 25 mm 40 AT10/17-2 SKU: 16831700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-25-mm-40-at10-17-2-sku-16831700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 25mm 40 AT10/16-2 SKU: 16831600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-25mm-40-at10-16-2-sku-16831600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 25mm 40 AT10/15-2 SKU: 16831500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-25mm-40-at10-15-2-sku-16831500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 96 teeth for belt width 16 mm 31 AT10/96-0 SKU: 16829600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-96-teeth-for-belt-width-16-mm-31-at10-96-0-sku-16829600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 84 teeth for belt width 16 mm 31 AT10/84-0 SKU: 16828400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-84-teeth-for-belt-width-16-mm-31-at10-84-0-sku-16828400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 16 mm 31 AT10/72-0 SKU: 16827200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-16-mm-31-at10-72-0-sku-16827200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 16mm 31 AT10/60-0 SKU: 16826000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-16mm-31-at10-60-0-sku-16826000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 16mm 31 AT10/48-0 SKU: 16824800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-16mm-31-at10-48-0-sku-16824800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 16mm 31 AT10/44-0 SKU: 16824400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-16mm-31-at10-44-0-sku-16824400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 16mm 31 AT10/40-2 SKU: 16824000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-16mm-31-at10-40-2-sku-16824000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 16mm 31 AT10/36-2 SKU: 16823600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-16mm-31-at10-36-2-sku-16823600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 16mm 31 AT10/32-2 SKU: 16823200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-16mm-31-at10-32-2-sku-16823200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 16mm 31 AT10/30-2 SKU: 16823000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-16mm-31-at10-30-2-sku-16823000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 16mm 31 AT10/28-2 SKU: 16822800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-16mm-31-at10-28-2-sku-16822800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 16mm 31 AT10/27-2 SKU: 16822700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-16mm-31-at10-27-2-sku-16822700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 16mm 31 AT10/26-2 SKU: 16822600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-16mm-31-at10-26-2-sku-16822600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 16mm 31 AT10/25-2 SKU: 16822500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-16mm-31-at10-25-2-sku-16822500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 16mm 31 AT10/24-2 SKU: 16822400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-16mm-31-at10-24-2-sku-16822400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 16mm 31 AT10/22-2 SKU: 16822200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-16mm-31-at10-22-2-sku-16822200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 16mm 31 AT10/20-2 SKU: 16822000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-16mm-31-at10-20-2-sku-16822000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 16mm 31 AT10/19-2 SKU: 16821900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-16mm-31-at10-19-2-sku-16821900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 16mm 31 AT10/18-2 SKU: 16821800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-16mm-31-at10-18-2-sku-16821800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 16 mm 31 AT10/17-2 SKU: 16821700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-16-mm-31-at10-17-2-sku-16821700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 16mm 31 AT10/16-2 SKU: 16821600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-16mm-31-at10-16-2-sku-16821600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 16mm 31 AT10/15-2 SKU: 16821500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-16mm-31-at10-15-2-sku-16821500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 96 teeth for belt width 40mm 55 AT10/96-0 SKU: 16819600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-96-teeth-for-belt-width-40mm-55-at10-96-0-sku-16819600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 84 teeth for belt width 40mm 55 AT10/84-0 SKU: 16818400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-84-teeth-for-belt-width-40mm-55-at10-84-0-sku-16818400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 40mm 55 AT10/72-0 SKU: 16817200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-40mm-55-at10-72-0-sku-16817200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 40mm 55 AT10/60-0 SKU: 16816000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-40mm-55-at10-60-0-sku-16816000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 40mm 55 AT10/48-0 SKU: 16814800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-40mm-55-at10-48-0-sku-16814800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 40mm 55 AT10/44-0 SKU: 16814400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-40mm-55-at10-44-0-sku-16814400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 40mm 55 AT10/40-2 SKU: 16814000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-40mm-55-at10-40-2-sku-16814000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 40mm 55 AT10/36-2 SKU: 16813600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-40mm-55-at10-36-2-sku-16813600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 40mm 55 AT10/32-2 SKU: 16813200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-40mm-55-at10-32-2-sku-16813200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 40mm 55 AT10/30-2 SKU: 16813000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-40mm-55-at10-30-2-sku-16813000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 40mm 55 AT10/28-2 SKU: 16812800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-40mm-55-at10-28-2-sku-16812800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 40mm 55 AT10/27-2 SKU: 16812700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-40mm-55-at10-27-2-sku-16812700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 40mm 55 AT10/26-2 SKU: 16812600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-40mm-55-at10-26-2-sku-16812600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 40mm 55 AT10/25-2 SKU: 16812500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-40mm-55-at10-25-2-sku-16812500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 40mm 55 AT10/24-2 SKU: 16812400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-40mm-55-at10-24-2-sku-16812400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 40mm 55 AT10/22-2 SKU: 16812200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-40mm-55-at10-22-2-sku-16812200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 40mm 55 AT10/20-2 SKU: 16812000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-40mm-55-at10-20-2-sku-16812000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 40mm 55 AT10/19-2 SKU: 16811900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-40mm-55-at10-19-2-sku-16811900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 40mm 55 AT10/18-2 SKU: 16811800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-40mm-55-at10-18-2-sku-16811800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 40mm 55 AT10/17-2 SKU: 16811700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-40mm-55-at10-17-2-sku-16811700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 40mm 55 AT10/16-2 SKU: 16811600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-40mm-55-at10-16-2-sku-16811600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 40mm 55 AT10/15-2 SKU: 16811500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-40mm-55-at10-15-2-sku-16811500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [timing bar AT5 40 teeth length 160mm material 1.4305 SKU: 16699940](https://maedler.in/product/timing-bar-at5-40-teeth-length-160mm-material-1-4305-sku-16699940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 36 teeth length 160mm material 1.4305 SKU: 16699936](https://maedler.in/product/timing-bar-at5-36-teeth-length-160mm-material-1-4305-sku-16699936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 32 teeth length 160mm material 1.4305 SKU: 16699932](https://maedler.in/product/timing-bar-at5-32-teeth-length-160mm-material-1-4305-sku-16699932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 30 teeth length 160mm material 1.4305 SKU: 16699930](https://maedler.in/product/timing-bar-at5-30-teeth-length-160mm-material-1-4305-sku-16699930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 25 teeth length 160mm material 1.4305 SKU: 16699925](https://maedler.in/product/timing-bar-at5-25-teeth-length-160mm-material-1-4305-sku-16699925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 24 teeth length 160mm material 1.4305 SKU: 16699924](https://maedler.in/product/timing-bar-at5-24-teeth-length-160mm-material-1-4305-sku-16699924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 20 teeth length 160mm material 1.4305 SKU: 16699920](https://maedler.in/product/timing-bar-at5-20-teeth-length-160mm-material-1-4305-sku-16699920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 18 teeth length 140mm material 1.4305 SKU: 16699918](https://maedler.in/product/timing-bar-at5-18-teeth-length-140mm-material-1-4305-sku-16699918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 16 teeth length 140mm material 1.4305 SKU: 16699916](https://maedler.in/product/timing-bar-at5-16-teeth-length-140mm-material-1-4305-sku-16699916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 15 teeth length 140mm material 1.4305 SKU: 16699915](https://maedler.in/product/timing-bar-at5-15-teeth-length-140mm-material-1-4305-sku-16699915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT5 96 teeth length 160mm material aluminium SKU: 16699600](https://maedler.in/product/timing-bar-at5-96-teeth-length-160mm-material-aluminium-sku-16699600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 84 teeth length 160mm material aluminium SKU: 16698400](https://maedler.in/product/timing-bar-at5-84-teeth-length-160mm-material-aluminium-sku-16698400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 72 teeth length 160mm material aluminium SKU: 16697200](https://maedler.in/product/timing-bar-at5-72-teeth-length-160mm-material-aluminium-sku-16697200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 64 teeth length 160mm material aluminium SKU: 16696400](https://maedler.in/product/timing-bar-at5-64-teeth-length-160mm-material-aluminium-sku-16696400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 60 teeth length 160mm material aluminium SKU: 16696000](https://maedler.in/product/timing-bar-at5-60-teeth-length-160mm-material-aluminium-sku-16696000/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 58 teeth length 160mm material aluminium SKU: 16695800](https://maedler.in/product/timing-bar-at5-58-teeth-length-160mm-material-aluminium-sku-16695800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 56 teeth length 160mm material aluminium SKU: 16695600](https://maedler.in/product/timing-bar-at5-56-teeth-length-160mm-material-aluminium-sku-16695600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 52 teeth length 160mm material aluminium SKU: 16695200](https://maedler.in/product/timing-bar-at5-52-teeth-length-160mm-material-aluminium-sku-16695200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 48 teeth length 160mm material aluminium SKU: 16694800](https://maedler.in/product/timing-bar-at5-48-teeth-length-160mm-material-aluminium-sku-16694800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 44 teeth length 160mm material aluminium SKU: 16694400](https://maedler.in/product/timing-bar-at5-44-teeth-length-160mm-material-aluminium-sku-16694400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 42 teeth length 160mm material aluminium SKU: 16694200](https://maedler.in/product/timing-bar-at5-42-teeth-length-160mm-material-aluminium-sku-16694200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 40 teeth length 160mm material aluminium SKU: 16694000](https://maedler.in/product/timing-bar-at5-40-teeth-length-160mm-material-aluminium-sku-16694000/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 38 teeth length 160mm material aluminium SKU: 16693800](https://maedler.in/product/timing-bar-at5-38-teeth-length-160mm-material-aluminium-sku-16693800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 36 teeth length 160mm material aluminium SKU: 16693600](https://maedler.in/product/timing-bar-at5-36-teeth-length-160mm-material-aluminium-sku-16693600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 34 teeth length 160mm material aluminium SKU: 16693400](https://maedler.in/product/timing-bar-at5-34-teeth-length-160mm-material-aluminium-sku-16693400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 32 teeth length 160mm material aluminium SKU: 16693200](https://maedler.in/product/timing-bar-at5-32-teeth-length-160mm-material-aluminium-sku-16693200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 30 teeth length 160mm material aluminium SKU: 16693000](https://maedler.in/product/timing-bar-at5-30-teeth-length-160mm-material-aluminium-sku-16693000/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 28 teeth length 160mm material aluminium SKU: 16692800](https://maedler.in/product/timing-bar-at5-28-teeth-length-160mm-material-aluminium-sku-16692800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 27 teeth length 160mm material aluminium SKU: 16692700](https://maedler.in/product/timing-bar-at5-27-teeth-length-160mm-material-aluminium-sku-16692700/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 26 teeth length 160mm material aluminium SKU: 16692600](https://maedler.in/product/timing-bar-at5-26-teeth-length-160mm-material-aluminium-sku-16692600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 25 teeth length 160mm material aluminium SKU: 16692500](https://maedler.in/product/timing-bar-at5-25-teeth-length-160mm-material-aluminium-sku-16692500/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 24 teeth length 160mm material aluminium SKU: 16692400](https://maedler.in/product/timing-bar-at5-24-teeth-length-160mm-material-aluminium-sku-16692400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 23 teeth length 160mm material aluminium SKU: 16692300](https://maedler.in/product/timing-bar-at5-23-teeth-length-160mm-material-aluminium-sku-16692300/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 22 teeth length 160mm material aluminium SKU: 16692200](https://maedler.in/product/timing-bar-at5-22-teeth-length-160mm-material-aluminium-sku-16692200/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 21 teeth length 160mm material aluminium SKU: 16692100](https://maedler.in/product/timing-bar-at5-21-teeth-length-160mm-material-aluminium-sku-16692100/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 20 teeth length 160mm material aluminium SKU: 16692000](https://maedler.in/product/timing-bar-at5-20-teeth-length-160mm-material-aluminium-sku-16692000/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 19 teeth length 140mm material aluminium SKU: 16691900](https://maedler.in/product/timing-bar-at5-19-teeth-length-140mm-material-aluminium-sku-16691900/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 18 teeth length 140mm material aluminium SKU: 16691800](https://maedler.in/product/timing-bar-at5-18-teeth-length-140mm-material-aluminium-sku-16691800/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 17 teeth length 140mm material aluminium SKU: 16691700](https://maedler.in/product/timing-bar-at5-17-teeth-length-140mm-material-aluminium-sku-16691700/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 16 teeth length 140mm material aluminium SKU: 16691600](https://maedler.in/product/timing-bar-at5-16-teeth-length-140mm-material-aluminium-sku-16691600/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 15 teeth length 140mm material aluminium SKU: 16691500](https://maedler.in/product/timing-bar-at5-15-teeth-length-140mm-material-aluminium-sku-16691500/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 14 teeth length 140mm material aluminium SKU: 16691400](https://maedler.in/product/timing-bar-at5-14-teeth-length-140mm-material-aluminium-sku-16691400/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 13 teeth length 140mm material aluminium SKU: 16691300](https://maedler.in/product/timing-bar-at5-13-teeth-length-140mm-material-aluminium-sku-16691300/): Material: Aluminium similar EN AW2017A. - [timing bar AT5 12 teeth length 140mm material aluminium SKU: 16691200](https://maedler.in/product/timing-bar-at5-12-teeth-length-140mm-material-aluminium-sku-16691200/): Material: Aluminium similar EN AW2017A. - [Fixing plate for timing belts material aluminium AT5 belt width 50mm SKU: 16689901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-50mm-sku-16689901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium AT5 belt width 25mm SKU: 16689900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-25mm-sku-16689900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium AT5 belt width 32mm SKU: 16689800](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at5-belt-width-32mm-sku-16689800/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt AT5 width 50mm 50AT5 open length PAZ = Polyamide fabric on tooth side SKU: 16688001](https://maedler.in/product/polyurethane-timing-belt-at5-width-50mm-50at5-open-length-paz-polyamide-fabric-on-tooth-side-sku-16688001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT5 width 50mm 50 AT5 open length with tensile members from steel packed 2 x 25mm SKU: 16688000](https://maedler.in/product/polyurethane-timing-belt-at5-width-50mm-50-at5-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16688000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT5 width 32mm Lw 1500mm 300 teeth 32 AT5/1500 SKU: 16687024](https://maedler.in/product/polyurethane-timing-belt-at5-width-32mm-lw-1500mm-300-teeth-32-at5-1500-sku-16687024/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [5/2-directional control valve solenoid actuated Norgren V63D511A-A218J G1/2 Voltage 110/120 V AC SKU: 903015-20702](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a218j-g1-2-voltage-110-120-v-ac-sku-903015-20702/): ManufacturePartnumber V63D511A-A218J Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D511A-A213L G1/2 Voltage 24 V DC SKU: 903015-20701](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a213l-g1-2-voltage-24-v-dc-sku-903015-20701/): ManufacturePartnumber V63D511A-A213L Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D511A-A213J G1/2 Voltage 24 V DC SKU: 903015-20700](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a213j-g1-2-voltage-24-v-dc-sku-903015-20700/): ManufacturePartnumber V63D511A-A213J Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D523A-A313J G1/2 Voltage 24 V DC SKU: 903015-20699](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d523a-a313j-g1-2-voltage-24-v-dc-sku-903015-20699/): ManufacturePartnumber V63D523A-A313J Function – Actuation Sol/air External Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D523A-A213J G1/2 Voltage 24 V DC SKU: 903015-20698](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d523a-a213j-g1-2-voltage-24-v-dc-sku-903015-20698/): ManufacturePartnumber V63D523A-A213J Function – Actuation Sol/air External Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A319J G1/2 Voltage 220/240 V AC SKU: 903015-20697](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a319j-g1-2-voltage-220-240-v-ac-sku-903015-20697/): ManufacturePartnumber V63D513A-A319J Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A318J G1/2 Voltage 110/120 V AC SKU: 903015-20696](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a318j-g1-2-voltage-110-120-v-ac-sku-903015-20696/): ManufacturePartnumber V63D513A-A318J Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A314J G1/2 Voltage 24 V AC SKU: 903015-20695](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a314j-g1-2-voltage-24-v-ac-sku-903015-20695/): ManufacturePartnumber V63D513A-A314J Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A313J G1/2 Voltage 24 V DC SKU: 903015-20693](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a313j-g1-2-voltage-24-v-dc-sku-903015-20693/): ManufacturePartnumber V63D513A-A313J Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A312J G1/2 Voltage 12 V DC SKU: 903015-20692](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a312j-g1-2-voltage-12-v-dc-sku-903015-20692/): ManufacturePartnumber V63D513A-A312J Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A219L G1/2 Voltage 220/240 V AC SKU: 903015-20691](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a219l-g1-2-voltage-220-240-v-ac-sku-903015-20691/): ManufacturePartnumber V63D513A-A219L Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A219J G1/2 Voltage 220/240 V AC SKU: 903015-20690](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a219j-g1-2-voltage-220-240-v-ac-sku-903015-20690/): ManufacturePartnumber V63D513A-A219J Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A218J G1/2 Voltage 110/120 V AC SKU: 903015-20689](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a218j-g1-2-voltage-110-120-v-ac-sku-903015-20689/): ManufacturePartnumber V63D513A-A218J Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A213L G1/2 Voltage 24 V DC SKU: 903015-20688](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a213l-g1-2-voltage-24-v-dc-sku-903015-20688/): ManufacturePartnumber V63D513A-A213L Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D513A-A213J G1/2 Voltage 24 V DC SKU: 903015-20687](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d513a-a213j-g1-2-voltage-24-v-dc-sku-903015-20687/): ManufacturePartnumber V63D513A-A213J Function – Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 228 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D517A-A319J G1/2 Voltage 220/240 V AC SKU: 903015-20686](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d517a-a319j-g1-2-voltage-220-240-v-ac-sku-903015-20686/): ManufacturePartnumber V63D517A-A319J Function – Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 235 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D517A-A318J G1/2 Voltage 110/120 V AC SKU: 903015-20685](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d517a-a318j-g1-2-voltage-110-120-v-ac-sku-903015-20685/): ManufacturePartnumber V63D517A-A318J Function – Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 235 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D517A-A313J G1/2 Voltage 24 V DC SKU: 903015-20684](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d517a-a313j-g1-2-voltage-24-v-dc-sku-903015-20684/): ManufacturePartnumber V63D517A-A313J Function – Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 235 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D517A-A219J G1/2 Voltage 220/240 V AC SKU: 903015-20683](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d517a-a219j-g1-2-voltage-220-240-v-ac-sku-903015-20683/): ManufacturePartnumber V63D517A-A219J Function – Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 235 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D517A-A218J G1/2 Voltage 110/120 V AC SKU: 903015-20682](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d517a-a218j-g1-2-voltage-110-120-v-ac-sku-903015-20682/): ManufacturePartnumber V63D517A-A218J Function – Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 235 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D517A-A213L G1/2 Voltage 24 V DC SKU: 903015-20681](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d517a-a213l-g1-2-voltage-24-v-dc-sku-903015-20681/): ManufacturePartnumber V63D517A-A213L Function – Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 235 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D517A-A213J G1/2 Voltage 24 V DC SKU: 903015-20680](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d517a-a213j-g1-2-voltage-24-v-dc-sku-903015-20680/): ManufacturePartnumber V63D517A-A213J Function – Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 235 Width [mm] 35 Height [mm] 65 Weight [kg] 0,96 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D411A-A313J G1/2 Voltage 24 V DC SKU: 903015-20679](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d411a-a313j-g1-2-voltage-24-v-dc-sku-903015-20679/): ManufacturePartnumber V63D411A-A313J Function NC Actuation Sol/Sol Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 219 Width [mm] 35 Height [mm] 65 Weight [kg] 0,87 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D411A-A213J G1/2 Voltage 24 V DC SKU: 903015-20678](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d411a-a213j-g1-2-voltage-24-v-dc-sku-903015-20678/): ManufacturePartnumber V63D411A-A213J Function NC Actuation Sol/Sol Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 219 Width [mm] 35 Height [mm] 65 Weight [kg] 0,87 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D313A-A319J G1/2 Voltage 220/240 V AC SKU: 903015-20677](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d313a-a319j-g1-2-voltage-220-240-v-ac-sku-903015-20677/): ManufacturePartnumber V63D313A-A319J Function NO Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D313A-A313J G1/2 Voltage 24 V DC SKU: 903015-20676](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d313a-a313j-g1-2-voltage-24-v-dc-sku-903015-20676/): ManufacturePartnumber V63D313A-A313J Function NO Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D313A-A213J G1/2 Voltage 24 V DC SKU: 903015-20675](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d313a-a213j-g1-2-voltage-24-v-dc-sku-903015-20675/): ManufacturePartnumber V63D313A-A213J Function NO Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D423A-A313J G1/2 Voltage 24 V DC SKU: 903015-20674](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d423a-a313j-g1-2-voltage-24-v-dc-sku-903015-20674/): ManufacturePartnumber V63D423A-A313J Function NC Actuation Sol/air External Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D423A-A219J G1/2 Voltage 220/240 V AC SKU: 903015-20673](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d423a-a219j-g1-2-voltage-220-240-v-ac-sku-903015-20673/): ManufacturePartnumber V63D423A-A219J Function NC Actuation Sol/air External Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D423A-A213J G1/2 Voltage 24 V DC SKU: 903015-20672](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d423a-a213j-g1-2-voltage-24-v-dc-sku-903015-20672/): ManufacturePartnumber V63D423A-A213J Function NC Actuation Sol/air External Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D413A-A319J G1/2 Voltage 220/240 V AC SKU: 903015-20671](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d413a-a319j-g1-2-voltage-220-240-v-ac-sku-903015-20671/): ManufacturePartnumber V63D413A-A319J Function NC Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D413A-A313J G1/2 Voltage 24 V DC SKU: 903015-20669](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d413a-a313j-g1-2-voltage-24-v-dc-sku-903015-20669/): ManufacturePartnumber V63D413A-A313J Function NC Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D413A-A219J G1/2 Voltage 220/240 V AC SKU: 903015-20668](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d413a-a219j-g1-2-voltage-220-240-v-ac-sku-903015-20668/): ManufacturePartnumber V63D413A-A219J Function NC Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D413A-A218J G1/2 Voltage 110/120 V AC SKU: 903015-20667](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d413a-a218j-g1-2-voltage-110-120-v-ac-sku-903015-20667/): ManufacturePartnumber V63D413A-A218J Function NC Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D413A-A214J G1/2 Voltage 24 V AC SKU: 903015-20666](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d413a-a214j-g1-2-voltage-24-v-ac-sku-903015-20666/): ManufacturePartnumber V63D413A-A214J Function NC Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 24 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D413A-A213L G1/2 Voltage 24 V DC SKU: 903015-20665](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d413a-a213l-g1-2-voltage-24-v-dc-sku-903015-20665/): ManufacturePartnumber V63D413A-A213L Function NC Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D413A-A213J G1/2 Voltage 24 V DC SKU: 903015-20664](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d413a-a213j-g1-2-voltage-24-v-dc-sku-903015-20664/): ManufacturePartnumber V63D413A-A213J Function NC Actuation Sol/air Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 3 … 10 bar Voltage 12 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 190 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D417A-A319J G1/2 Voltage 220/240 V AC SKU: 903015-20663](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d417a-a319j-g1-2-voltage-220-240-v-ac-sku-903015-20663/): ManufacturePartnumber V63D417A-A319J Function NC Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 197 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D417A-A313J G1/2 Voltage 24 V DC SKU: 903015-20661](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d417a-a313j-g1-2-voltage-24-v-dc-sku-903015-20661/): ManufacturePartnumber V63D417A-A313J Function NC Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 197 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D417A-A219J G1/2 Voltage 220/240 V AC SKU: 903015-20660](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d417a-a219j-g1-2-voltage-220-240-v-ac-sku-903015-20660/): ManufacturePartnumber V63D417A-A219J Function NC Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 197 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D417A-A218J G1/2 Voltage 110/120 V AC SKU: 903015-20659](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d417a-a218j-g1-2-voltage-110-120-v-ac-sku-903015-20659/): ManufacturePartnumber V63D417A-A218J Function NC Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface J Length [mm] 197 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D417A-A213L G1/2 Voltage 24 V DC SKU: 903015-20658](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d417a-a213l-g1-2-voltage-24-v-dc-sku-903015-20658/): ManufacturePartnumber V63D417A-A213L Function NC Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 197 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve solenoid actuated Norgren V63D417A-A213J G1/2 Voltage 24 V DC SKU: 903015-20657](https://maedler.in/product/3-2-directional-control-valve-solenoid-actuated-norgren-v63d417a-a213j-g1-2-voltage-24-v-dc-sku-903015-20657/): ManufacturePartnumber V63D417A-A213J Function NC Actuation Sol/spring Internal Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 197 Width [mm] 35 Height [mm] 65 Weight [kg] 0,78 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve pilot actuated Norgren V62CCDDA-XA020 G3/8 SKU: 903015-20656](https://maedler.in/product/2-x-3-2-directional-control-valve-pilot-actuated-norgren-v62ccdda-xa020-g3-8-sku-903015-20656/): ManufacturePartnumber V62CCDDA-XA020 Function NO/NC Actuation Air/Air Port Size G3/8 Flow Rate 1900 l/min Max Pressure 2 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 148 Width [mm] 34 Height [mm] 55 Weight [kg] 0,60 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve pilot actuated Norgren V61BCDDA-XA020 G1/4 SKU: 903015-20655](https://maedler.in/product/2-x-3-2-directional-control-valve-pilot-actuated-norgren-v61bcdda-xa020-g1-4-sku-903015-20655/): ManufacturePartnumber V61BCDDA-XA020 Function NO/NC Actuation Air/Air Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 124 Width [mm] 25 Height [mm] 40 Weight [kg] 0,28 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve pilot actuated Norgren V60ACDDA-XA020 G1/8 SKU: 903015-20654](https://maedler.in/product/2-x-3-2-directional-control-valve-pilot-actuated-norgren-v60acdda-xa020-g1-8-sku-903015-20654/): ManufacturePartnumber V60ACDDA-XA020 Function NO/NC Actuation Air/Air Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 113,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,18 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve pilot actuated Norgren V61BBDDA-XA020 G1/4 SKU: 903015-20653](https://maedler.in/product/2-x-3-2-directional-control-valve-pilot-actuated-norgren-v61bbdda-xa020-g1-4-sku-903015-20653/): ManufacturePartnumber V61BBDDA-XA020 Function NO/NO Actuation Air/Air Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 124 Width [mm] 25 Height [mm] 40 Weight [kg] 0,28 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve pilot actuated Norgren V60ABDDA-XA020 G1/8 SKU: 903015-20652](https://maedler.in/product/2-x-3-2-directional-control-valve-pilot-actuated-norgren-v60abdda-xa020-g1-8-sku-903015-20652/): ManufacturePartnumber V60ABDDA-XA020 Function NO/NO Actuation Air/Air Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 113,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,18 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V62S7DDA-XP020 3/8 NPT SKU: 903015-20651](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v62s7dda-xp020-3-8-npt-sku-903015-20651/): ManufacturePartnumber V62S7DDA-XP020 Function COE Actuation Air/Air Port Size 3/8 NPT Flow Rate 1900 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 180 Width [mm] 34 Height [mm] 55 Weight [kg] 0,67 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V62S5D7A-XP090 3/8 NPT SKU: 903015-20650](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v62s5d7a-xp090-3-8-npt-sku-903015-20650/): ManufacturePartnumber V62S5D7A-XP090 Function – Actuation Air/Spring Port Size 3/8 NPT Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 165 Width [mm] 34 Height [mm] 55 Weight [kg] 0,56 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V62S5DDA-XP020 3/8 NPT SKU: 903015-20649](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v62s5dda-xp020-3-8-npt-sku-903015-20649/): ManufacturePartnumber V62S5DDA-XP020 Function – Actuation Air/Air Port Size 3/8 NPT Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 149 Width [mm] 34 Height [mm] 55 Weight [kg] 0,58 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V62S4D7A-XP090 3/8 NPT SKU: 903015-20648](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v62s4d7a-xp090-3-8-npt-sku-903015-20648/): ManufacturePartnumber V62S4D7A-XP090 Function NC Actuation Air/Spring Port Size 3/8 NPT Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 132 Width [mm] 34 Height [mm] 55 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V62S4DDA-XP020 3/8 NPT SKU: 903015-20647](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v62s4dda-xp020-3-8-npt-sku-903015-20647/): ManufacturePartnumber V62S4DDA-XP020 Function NC Actuation Air/Air Port Size 3/8 NPT Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 124 Width [mm] 34 Height [mm] 55 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V61R5D7A-XP090 1/4 NPT SKU: 903015-20645](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v61r5d7a-xp090-1-4-npt-sku-903015-20645/): ManufacturePartnumber V61R5D7A-XP090 Function – Actuation Air/Spring Port Size 1/4 NPT Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 130 Width [mm] 25 Height [mm] 40 Weight [kg] 0,26 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V61R5DDA-XP020 1/4 NPT SKU: 903015-20644](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v61r5dda-xp020-1-4-npt-sku-903015-20644/): ManufacturePartnumber V61R5DDA-XP020 Function – Actuation Air/Air Port Size 1/4 NPT Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 124 Width [mm] 25 Height [mm] 40 Weight [kg] 0,27 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V61R4D7A-XP090 1/4 NPT SKU: 903015-20643](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v61r4d7a-xp090-1-4-npt-sku-903015-20643/): ManufacturePartnumber V61R4D7A-XP090 Function NC Actuation Air/Spring Port Size 1/4 NPT Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 110 Width [mm] 25 Height [mm] 40 Weight [kg] 0,21 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V61R4DDA-XP020 1/4 NPT SKU: 903015-20642](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v61r4dda-xp020-1-4-npt-sku-903015-20642/): ManufacturePartnumber V61R4DDA-XP020 Function NC Actuation Air/Air Port Size 1/4 NPT Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 104 Width [mm] 25 Height [mm] 55 Weight [kg] 0,21 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V60P5D7A-XP090 1/8 NPT SKU: 903015-20641](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v60p5d7a-xp090-1-8-npt-sku-903015-20641/): ManufacturePartnumber V60P5D7A-XP090 Function – Actuation Air/Spring Port Size 1/8 NPT Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 105 Width [mm] 22 Height [mm] 35 Weight [kg] 0,16 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V60P5DDA-XP020 1/8 NPT SKU: 903015-20640](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v60p5dda-xp020-1-8-npt-sku-903015-20640/): ManufacturePartnumber V60P5DDA-XP020 Function – Actuation Air/Air Port Size 1/8 NPT Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 104,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,17 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V60P4D7A-XP090 1/8 NPT SKU: 903015-20639](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v60p4d7a-xp090-1-8-npt-sku-903015-20639/): ManufacturePartnumber V60P4D7A-XP090 Function NC Actuation Air/Spring Port Size 1/8 NPT Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 89 Width [mm] 22 Height [mm] 35 Weight [kg] 0,13 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve pilot actuated Norgren V62CADDA-XA020 G3/8 SKU: 903015-20638](https://maedler.in/product/2-x-3-2-directional-control-valve-pilot-actuated-norgren-v62cadda-xa020-g3-8-sku-903015-20638/): ManufacturePartnumber V62CADDA-XA020 Function NC/NC Actuation Air/Air Port Size G3/8 Flow Rate 1900 l/min Max Pressure 2 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 148 Width [mm] 34 Height [mm] 55 Weight [kg] 0,60 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V62C8DDA-XA020 G3/8 SKU: 903015-20637](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v62c8dda-xa020-g3-8-sku-903015-20637/): ManufacturePartnumber V62C8DDA-XA020 Function COP Actuation Air/Air Port Size G3/8 Flow Rate 1900 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 180 Width [mm] 34 Height [mm] 55 Weight [kg] 0,67 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V62C7DDA-XA020 G3/8 SKU: 903015-20636](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v62c7dda-xa020-g3-8-sku-903015-20636/): ManufacturePartnumber V62C7DDA-XA020 Function COE Actuation Air/Air Port Size G3/8 Flow Rate 1900 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 180 Width [mm] 34 Height [mm] 55 Weight [kg] 0,67 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V62C6DDA-XA020 G3/8 SKU: 903015-20635](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v62c6dda-xa020-g3-8-sku-903015-20635/): ManufacturePartnumber V62C6DDA-XA020 Function APB Actuation Air/Air Port Size G3/8 Flow Rate 1900 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 180 Width [mm] 34 Height [mm] 55 Weight [kg] 0,67 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V62C5D7A-XA090 G3/8 SKU: 903015-20634](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v62c5d7a-xa090-g3-8-sku-903015-20634/): ManufacturePartnumber V62C5D7A-XA090 Function – Actuation Air/Spring Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 165 Width [mm] 34 Height [mm] 55 Weight [kg] 0,56 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V62C5DDA-XA020 G3/8 SKU: 903015-20633](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v62c5dda-xa020-g3-8-sku-903015-20633/): ManufacturePartnumber V62C5DDA-XA020 Function – Actuation Air/Air Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 149 Width [mm] 34 Height [mm] 55 Weight [kg] 0,58 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V62C4D7A-XA090 G3/8 SKU: 903015-20632](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v62c4d7a-xa090-g3-8-sku-903015-20632/): ManufacturePartnumber V62C4D7A-XA090 Function NC Actuation Air/Spring Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 132 Width [mm] 34 Height [mm] 55 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V62C4DDA-XA020 G3/8 SKU: 903015-20631](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v62c4dda-xa020-g3-8-sku-903015-20631/): ManufacturePartnumber V62C4DDA-XA020 Function NC Actuation Air/Air Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 124 Width [mm] 34 Height [mm] 55 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V62C3D7A-XA090 G3/8 SKU: 903015-20630](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v62c3d7a-xa090-g3-8-sku-903015-20630/): ManufacturePartnumber V62C3D7A-XA090 Function NO Actuation Air/Spring Port Size G3/8 Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 132 Width [mm] 34 Height [mm] 55 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve pilot actuated Norgren V61BADDA-XA020 G1/4 SKU: 903015-20629](https://maedler.in/product/2-x-3-2-directional-control-valve-pilot-actuated-norgren-v61badda-xa020-g1-4-sku-903015-20629/): ManufacturePartnumber V61BADDA-XA020 Function NC/NC Actuation Air/Air Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 124 Width [mm] 25 Height [mm] 40 Weight [kg] 0,28 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V61B8DDA-XA020 G1/4 SKU: 903015-20628](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v61b8dda-xa020-g1-4-sku-903015-20628/): ManufacturePartnumber V61B8DDA-XA020 Function COP Actuation Air/Air Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 142 Width [mm] 25 Height [mm] 40 Weight [kg] 0,32 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V61B7DDA-XA020 G1/4 SKU: 903015-20627](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v61b7dda-xa020-g1-4-sku-903015-20627/): ManufacturePartnumber V61B7DDA-XA020 Function COE Actuation Air/Air Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 142 Width [mm] 25 Height [mm] 40 Weight [kg] 0,32 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V61B6DDA-XA020 G1/4 SKU: 903015-20626](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v61b6dda-xa020-g1-4-sku-903015-20626/): ManufacturePartnumber V61B6DDA-XA020 Function APB Actuation Air/Air Port Size G1/4 Flow Rate 950 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 142 Width [mm] 25 Height [mm] 40 Weight [kg] 0,32 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V61B5D7A-XA090 G1/4 SKU: 903015-20625](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v61b5d7a-xa090-g1-4-sku-903015-20625/): ManufacturePartnumber V61B5D7A-XA090 Function – Actuation Air/Spring Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 130 Width [mm] 25 Height [mm] 40 Weight [kg] 0,26 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V61B5DDA-XA020 G1/4 SKU: 903015-20624](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v61b5dda-xa020-g1-4-sku-903015-20624/): ManufacturePartnumber V60A5DDA-XA020 Function – Actuation Air/Air Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 124 Width [mm] 25 Height [mm] 40 Weight [kg] 0,27 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V61B4D7A-XA090 G1/4 SKU: 903015-20623](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v61b4d7a-xa090-g1-4-sku-903015-20623/): ManufacturePartnumber V61B4D7A-XA090 Function NC Actuation Air/Spring Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 110 Width [mm] 25 Height [mm] 40 Weight [kg] 0,21 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V61B4DDA-XA020 G1/4 SKU: 903015-20622](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v61b4dda-xa020-g1-4-sku-903015-20622/): ManufacturePartnumber V61B4DDA-XA020 Function NC Actuation Air/Air Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 104 Width [mm] 25 Height [mm] 55 Weight [kg] 0,21 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V61B3D7A-XA090 G1/4 SKU: 903015-20621](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v61b3d7a-xa090-g1-4-sku-903015-20621/): ManufacturePartnumber V61B3D7A-XA090 Function NO Actuation Air/Spring Port Size G1/4 Flow Rate 1300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 110 Width [mm] 25 Height [mm] 40 Weight [kg] 0,21 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve pilot actuated Norgren V60AADDA-XA020 G1/8 SKU: 903015-20620](https://maedler.in/product/2-x-3-2-directional-control-valve-pilot-actuated-norgren-v60aadda-xa020-g1-8-sku-903015-20620/): ManufacturePartnumber V60AADDA-XA020 Function NC/NC Actuation Air/Air Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 113,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,18 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V60A8DDA-XA020 G1/8 SKU: 903015-20619](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v60a8dda-xa020-g1-8-sku-903015-20619/): ManufacturePartnumber V60A8DDA-XA020 Function COP Actuation Air/Air Port Size G1/8 Flow Rate 500 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 118,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,20 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V60A7DDA-XA020 G1/8 SKU: 903015-20618](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v60a7dda-xa020-g1-8-sku-903015-20618/): ManufacturePartnumber V60A7DDA-XA020 Function COE Actuation Air/Air Port Size G1/8 Flow Rate 500 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 118,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,20 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V60A6DDA-XA020 G1/8 SKU: 903015-20617](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v60a6dda-xa020-g1-8-sku-903015-20617/): ManufacturePartnumber V60A6DDA-XA020 Function APB Actuation Air/Air Port Size G1/8 Flow Rate 500 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 118,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,20 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V60A5D7A-XA090 G1/8 SKU: 903015-20616](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v60a5d7a-xa090-g1-8-sku-903015-20616/): ManufacturePartnumber V60A5D7A-XA090 Function – Actuation Air/Spring Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 105 Width [mm] 22 Height [mm] 35 Weight [kg] 0,16 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V60A5DDA-XA020 G1/8 SKU: 903015-20615](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v60a5dda-xa020-g1-8-sku-903015-20615/): ManufacturePartnumber V60A5DDA-XA020 Function – Actuation Air/Air Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 104,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,17 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V60A4D7A-XA090 G1/8 SKU: 903015-20614](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v60a4d7a-xa090-g1-8-sku-903015-20614/): ManufacturePartnumber V60A4D7A-XA090 Function NC Actuation Air/Spring Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 89 Width [mm] 22 Height [mm] 35 Weight [kg] 0,13 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V60A4DDA-XA020 G1/8 SKU: 903015-20613](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v60a4dda-xa020-g1-8-sku-903015-20613/): ManufacturePartnumber V60A4DDA-XA020 Function NC Actuation Air/Air Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 89 Width [mm] 22 Height [mm] 35 Weight [kg] 0,13 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V60A3D7A-XA090 G1/8 SKU: 903015-20612](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v60a3d7a-xa090-g1-8-sku-903015-20612/): ManufacturePartnumber V60A3D7A-XA090 Function NO Actuation Air/Spring Port Size G1/8 Flow Rate 750 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 89 Width [mm] 22 Height [mm] 35 Weight [kg] 0,13 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BC11A-A313J G1/4 Voltage 24 V DC SKU: 903015-20610](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61bc11a-a313j-g1-4-voltage-24-v-dc-sku-903015-20610/): ManufacturePartnumber V61BC11A-A313J Function NO/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1900 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BC11A-A213J G1/4 Voltage 24 V DC SKU: 903015-20609](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61bc11a-a213j-g1-4-voltage-24-v-dc-sku-903015-20609/): ManufacturePartnumber V61BC11A-A213J Function NO/NC Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 1900 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AC11A-A313J G1/8 Voltage 24 V DC SKU: 903015-20608](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60ac11a-a313j-g1-8-voltage-24-v-dc-sku-903015-20608/): ManufacturePartnumber V60AC11A-A313J Function NO/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AC11A-A219J G1/8 Voltage 220/240 V AC SKU: 903015-20607](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60ac11a-a219j-g1-8-voltage-220-240-v-ac-sku-903015-20607/): ManufacturePartnumber V60AC11A-A219J Function NO/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AC11A-A213L G1/8 Voltage 24 V DC SKU: 903015-20606](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60ac11a-a213l-g1-8-voltage-24-v-dc-sku-903015-20606/): ManufacturePartnumber V60AC11A-A213L Function NO/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface L Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AC11A-A213J G1/8 Voltage 24 V DC SKU: 903015-20605](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60ac11a-a213j-g1-8-voltage-24-v-dc-sku-903015-20605/): ManufacturePartnumber V60AC11A-A213J Function NO/NC Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V62CB11A-A213J G3/8 Voltage 24 V DC SKU: 903015-20604](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v62cb11a-a213j-g3-8-voltage-24-v-dc-sku-903015-20604/): ManufacturePartnumber V62CB11A-A213J Function NO/NO Actuation Sol/Sol Internal Port Size G3/8 Flow Rate 1900 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,73 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BB11A-A313J G1/4 Voltage 24 V DC SKU: 903015-20603](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61bb11a-a313j-g1-4-voltage-24-v-dc-sku-903015-20603/): ManufacturePartnumber V61BB11A-A313J Function NO/NO Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V61BB11A-A213J G1/4 Voltage 24 V DC SKU: 903015-20602](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v61bb11a-a213j-g1-4-voltage-24-v-dc-sku-903015-20602/): ManufacturePartnumber V61BB11A-A213J Function NO/NO Actuation Sol/Sol Internal Port Size G1/4 Flow Rate 950 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 199 Width [mm] 25 Height [mm] 40 Weight [kg] 0,43 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AB11A-A313J G1/8 Voltage 24 V DC SKU: 903015-20601](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60ab11a-a313j-g1-8-voltage-24-v-dc-sku-903015-20601/): ManufacturePartnumber V60AB11A-A313J Function NO/NO Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AB11A-A213L G1/8 Voltage 24 V DC SKU: 903015-20600](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60ab11a-a213l-g1-8-voltage-24-v-dc-sku-903015-20600/): ManufacturePartnumber V60AB11A-A213L Function NO/NO Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [2 x 3/2-directional control valve solenoid actuated Norgren V60AB11A-A213J G1/8 Voltage 24 V DC SKU: 903015-20599](https://maedler.in/product/2-x-3-2-directional-control-valve-solenoid-actuated-norgren-v60ab11a-a213j-g1-8-voltage-24-v-dc-sku-903015-20599/): ManufacturePartnumber V60AB11A-A213J Function NO/NO Actuation Sol/Sol Internal Port Size G1/8 Flow Rate 500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 2 Plug Interface J Length [mm] 174,5 Width [mm] 22 Height [mm] 35 Weight [kg] 0,34 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V62S522A-A318J 3/8 NPT Voltage 110/120 V AC SKU: 903015-20598](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v62s522a-a318j-3-8-npt-voltage-110-120-v-ac-sku-903015-20598/): ManufacturePartnumber V62S522A-A318J Function – Actuation Sol/Sol External Port Size 3/8 NPT Flow Rate 2600 l/min Max Pressure -0,9 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 218 Width [mm] 34 Height [mm] 55 Weight [kg] 0,72 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane timing belt AT10 width 25mm Lw 890mm 89 teeth 25 AT10/890 SKU: 16871100](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-890mm-89-teeth-25-at10-890-sku-16871100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 840mm 84 teeth 25 AT10/840 SKU: 16871000](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-840mm-84-teeth-25-at10-840-sku-16871000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 810mm 81 teeth 25 AT10/810 SKU: 16870900](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-810mm-81-teeth-25-at10-810-sku-16870900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 800mm 80 teeth 25 AT10/800 SKU: 16870800](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-800mm-80-teeth-25-at10-800-sku-16870800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 780mm 78 teeth 25 AT10/780 SKU: 16870700](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-780mm-78-teeth-25-at10-780-sku-16870700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 730mm 73 teeth 25 AT10/730 SKU: 16870600](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-730mm-73-teeth-25-at10-730-sku-16870600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 700mm 70 teeth 25 AT10/700 SKU: 16870500](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-700mm-70-teeth-25-at10-700-sku-16870500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 660mm 66 teeth 25 AT10/660 SKU: 16870400](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-660mm-66-teeth-25-at10-660-sku-16870400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 610mm 61 teeth 25 AT10/610 SKU: 16870300](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-610mm-61-teeth-25-at10-610-sku-16870300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 560mm 56 teeth 25 AT10/560 SKU: 16870200](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-560mm-56-teeth-25-at10-560-sku-16870200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 500mm 50 teeth 25 AT10/500 SKU: 16870100](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-500mm-50-teeth-25-at10-500-sku-16870100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm 25AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16870001](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-25at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16870001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 25mm 25 AT10 open length SKU: 16870000](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-25-at10-open-length-sku-16870000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT10 belt width 16mm SKU: 16869900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-16mm-sku-16869900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt AT10 width 16mm Lw 1800mm 180 teeth 16 AT10/1800 SKU: 16862600](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1800mm-180-teeth-16-at10-1800-sku-16862600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1700mm 170 teeth 16 AT10/1700 SKU: 16862500](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1700mm-170-teeth-16-at10-1700-sku-16862500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1600mm 160 teeth 16 AT10/1600 SKU: 16862400](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1600mm-160-teeth-16-at10-1600-sku-16862400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1500mm 150 teeth 16 AT10/1500 SKU: 16862300](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1500mm-150-teeth-16-at10-1500-sku-16862300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1400mm 140 teeth 16 AT10/1400 SKU: 16862200](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1400mm-140-teeth-16-at10-1400-sku-16862200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1320mm 132 teeth 16 AT10/1320 SKU: 16862100](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1320mm-132-teeth-16-at10-1320-sku-16862100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1250mm 125 teeth 16 AT10/1250 SKU: 16862000](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1250mm-125-teeth-16-at10-1250-sku-16862000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1210mm 121 teeth 16 AT10/1210 SKU: 16861900](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1210mm-121-teeth-16-at10-1210-sku-16861900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1150mm 115 teeth 16 AT10/1150 SKU: 16861800](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1150mm-115-teeth-16-at10-1150-sku-16861800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1080mm 108 teeth 16 AT10/1080 SKU: 16861700](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1080mm-108-teeth-16-at10-1080-sku-16861700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1050mm 105 teeth 16 AT10/1050 SKU: 16861600](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1050mm-105-teeth-16-at10-1050-sku-16861600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 1010mm 101 teeth 16 AT10/1010 SKU: 16861500](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-1010mm-101-teeth-16-at10-1010-sku-16861500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 980mm 98 teeth 16 AT10/980 SKU: 16861400](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-980mm-98-teeth-16-at10-980-sku-16861400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 960mm 96 teeth 16 AT10/960 SKU: 16861300](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-960mm-96-teeth-16-at10-960-sku-16861300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 920mm 92 teeth 16 AT10/920 SKU: 16861200](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-920mm-92-teeth-16-at10-920-sku-16861200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 890mm 89 teeth 16 AT10/890 SKU: 16861100](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-890mm-89-teeth-16-at10-890-sku-16861100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 840mm 84 teeth 16 AT10/840 SKU: 16861000](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-840mm-84-teeth-16-at10-840-sku-16861000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 810mm 81 teeth 16 AT10/810 SKU: 16860900](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-810mm-81-teeth-16-at10-810-sku-16860900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 800mm 80 teeth 16 AT10/800 SKU: 16860800](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-800mm-80-teeth-16-at10-800-sku-16860800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 780mm 78 teeth 16 AT10/780 SKU: 16860700](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-780mm-78-teeth-16-at10-780-sku-16860700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 730mm 73 teeth 16 AT10/730 SKU: 16860600](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-730mm-73-teeth-16-at10-730-sku-16860600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 700mm 70 teeth 16 AT10/700 SKU: 16860500](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-700mm-70-teeth-16-at10-700-sku-16860500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 660mm 66 teeth 16 AT10/660 SKU: 16860400](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-660mm-66-teeth-16-at10-660-sku-16860400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 610mm 61 teeth 16 AT10/610 SKU: 16860300](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-610mm-61-teeth-16-at10-610-sku-16860300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 560mm 56 teeth 16 AT10/560 SKU: 16860200](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-560mm-56-teeth-16-at10-560-sku-16860200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm Lw 500mm 50 teeth 16 AT10/500 SKU: 16860100](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-lw-500mm-50-teeth-16-at10-500-sku-16860100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 16mm 16AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16860001](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-16at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16860001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 16mm 16 AT10 open length SKU: 16860000](https://maedler.in/product/polyurethane-timing-belt-at10-width-16mm-16-at10-open-length-sku-16860000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 50 mm 66 AT10/72-0 SKU: 16857200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-50-mm-66-at10-72-0-sku-16857200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 50mm 66 AT10/60-0 SKU: 16856000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-50mm-66-at10-60-0-sku-16856000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 50mm 66 AT10/48-0 SKU: 16854800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-50mm-66-at10-48-0-sku-16854800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 50mm 66 AT10/44-0 SKU: 16854400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-50mm-66-at10-44-0-sku-16854400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 50mm 66 AT10/40-2 SKU: 16854000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-50mm-66-at10-40-2-sku-16854000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 50mm 66 AT10/36-2 SKU: 16853600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-50mm-66-at10-36-2-sku-16853600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 50mm 66 AT10/32-2 SKU: 16853200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-50mm-66-at10-32-2-sku-16853200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 50mm 66 AT10/30-2 SKU: 16853000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-50mm-66-at10-30-2-sku-16853000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 50mm 66 AT10/28-2 SKU: 16852800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-50mm-66-at10-28-2-sku-16852800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 50mm 66 AT10/27-2 SKU: 16852700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-50mm-66-at10-27-2-sku-16852700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 50mm 66 AT10/26-2 SKU: 16852600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-50mm-66-at10-26-2-sku-16852600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 50mm 66 AT10/25-2 SKU: 16852500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-50mm-66-at10-25-2-sku-16852500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 50mm 66 AT10/24-2 SKU: 16852400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-50mm-66-at10-24-2-sku-16852400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 50mm 66 AT10/22-2 SKU: 16852200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-50mm-66-at10-22-2-sku-16852200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 50mm 66 AT10/20-2 SKU: 16852000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-50mm-66-at10-20-2-sku-16852000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 50mm 66 AT10/19-2 SKU: 16851900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-50mm-66-at10-19-2-sku-16851900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 50mm 66 AT10/18-2 SKU: 16851800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-50mm-66-at10-18-2-sku-16851800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 50 mm 66 AT10/17-2 SKU: 16851700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-50-mm-66-at10-17-2-sku-16851700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 50mm 66 AT10/16-2 SKU: 16851600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-50mm-66-at10-16-2-sku-16851600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 50mm 66 AT10/15-2 SKU: 16851500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-50mm-66-at10-15-2-sku-16851500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 96 teeth for belt width 32 mm 47 AT10/96-0 SKU: 16849600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-96-teeth-for-belt-width-32-mm-47-at10-96-0-sku-16849600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 84 teeth for belt width 32 mm 47 AT10/84-0 SKU: 16848400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-84-teeth-for-belt-width-32-mm-47-at10-84-0-sku-16848400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 32 mm 47 AT10/72-0 SKU: 16847200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-32-mm-47-at10-72-0-sku-16847200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 32mm 47 AT10/60-0 SKU: 16846000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-32mm-47-at10-60-0-sku-16846000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 32mm 47 AT10/48-0 SKU: 16844800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-32mm-47-at10-48-0-sku-16844800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 32mm 47 AT10/44-0 SKU: 16844400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-32mm-47-at10-44-0-sku-16844400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 32mm 47 AT10/40-2 SKU: 16844000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-32mm-47-at10-40-2-sku-16844000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 32mm 47 AT10/36-2 SKU: 16843600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-32mm-47-at10-36-2-sku-16843600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 32mm 47 AT10/32-2 SKU: 16843200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-32mm-47-at10-32-2-sku-16843200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 32mm 47 AT10/30-2 SKU: 16843000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-32mm-47-at10-30-2-sku-16843000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 32mm 47 AT10/28-2 SKU: 16842800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-32mm-47-at10-28-2-sku-16842800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 32mm 47 AT10/27-2 SKU: 16842700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-32mm-47-at10-27-2-sku-16842700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 32mm 47 AT10/26-2 SKU: 16842600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-32mm-47-at10-26-2-sku-16842600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 32mm 47 AT10/25-2 SKU: 16842500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-32mm-47-at10-25-2-sku-16842500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 32mm 47 AT10/24-2 SKU: 16842400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-32mm-47-at10-24-2-sku-16842400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 32mm 47 AT10/22-2 SKU: 16842200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-32mm-47-at10-22-2-sku-16842200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 20 teeth for belt width 32mm 47 AT10/20-2 SKU: 16842000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-20-teeth-for-belt-width-32mm-47-at10-20-2-sku-16842000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 19 teeth for belt width 32mm 47 AT10/19-2 SKU: 16841900](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-19-teeth-for-belt-width-32mm-47-at10-19-2-sku-16841900/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 18 teeth for belt width 32mm 47 AT10/18-2 SKU: 16841800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-18-teeth-for-belt-width-32mm-47-at10-18-2-sku-16841800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 17 teeth for belt width 32 mm 47 AT10/17-2 SKU: 16841700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-17-teeth-for-belt-width-32-mm-47-at10-17-2-sku-16841700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 16 teeth for belt width 32mm 47 AT10/16-2 SKU: 16841600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-16-teeth-for-belt-width-32mm-47-at10-16-2-sku-16841600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 15 teeth for belt width 32mm 47 AT10/15-2 SKU: 16841500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-15-teeth-for-belt-width-32mm-47-at10-15-2-sku-16841500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 96 teeth for belt width 25 mm 40 AT10/96-0 SKU: 16839600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-96-teeth-for-belt-width-25-mm-40-at10-96-0-sku-16839600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 84 teeth for belt width 25 mm 40 AT10/84-0 SKU: 16838400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-84-teeth-for-belt-width-25-mm-40-at10-84-0-sku-16838400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 72 teeth for belt width 25 mm 40 AT10/72-0 SKU: 16837200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-72-teeth-for-belt-width-25-mm-40-at10-72-0-sku-16837200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 60 teeth for belt width 25mm 40 AT10/60-0 SKU: 16836000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-60-teeth-for-belt-width-25mm-40-at10-60-0-sku-16836000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 48 teeth for belt width 25mm 40 AT10/48-0 SKU: 16834800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-48-teeth-for-belt-width-25mm-40-at10-48-0-sku-16834800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 44 teeth for belt width 25mm 40 AT10/44-0 SKU: 16834400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-44-teeth-for-belt-width-25mm-40-at10-44-0-sku-16834400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 40 teeth for belt width 25mm 40 AT10/40-2 SKU: 16834000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-40-teeth-for-belt-width-25mm-40-at10-40-2-sku-16834000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 36 teeth for belt width 25mm 40 AT10/36-2 SKU: 16833600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-36-teeth-for-belt-width-25mm-40-at10-36-2-sku-16833600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 32 teeth for belt width 25mm 40 AT10/32-2 SKU: 16833200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-32-teeth-for-belt-width-25mm-40-at10-32-2-sku-16833200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 30 teeth for belt width 25mm 40 AT10/30-2 SKU: 16833000](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-30-teeth-for-belt-width-25mm-40-at10-30-2-sku-16833000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 28 teeth for belt width 25mm 40 AT10/28-2 SKU: 16832800](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-28-teeth-for-belt-width-25mm-40-at10-28-2-sku-16832800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 27 teeth for belt width 25mm 40 AT10/27-2 SKU: 16832700](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-27-teeth-for-belt-width-25mm-40-at10-27-2-sku-16832700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 26 teeth for belt width 25mm 40 AT10/26-2 SKU: 16832600](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-26-teeth-for-belt-width-25mm-40-at10-26-2-sku-16832600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 25 teeth for belt width 25mm 40 AT10/25-2 SKU: 16832500](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-25-teeth-for-belt-width-25mm-40-at10-25-2-sku-16832500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 24 teeth for belt width 25mm 40 AT10/24-2 SKU: 16832400](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-24-teeth-for-belt-width-25mm-40-at10-24-2-sku-16832400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [Timing belt pulley AT10 material aluminium 22 teeth for belt width 25mm 40 AT10/22-2 SKU: 16832200](https://maedler.in/product/timing-belt-pulley-at10-material-aluminium-22-teeth-for-belt-width-25mm-40-at10-22-2-sku-16832200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. - [V-belt tensioner 350N profile XPZ, SPZ and Z (10) 2 grooves Dw 90mm SKU: 14085102](https://maedler.in/product/v-belt-tensioner-350n-profile-xpz-spz-and-z-10-2-grooves-dw-90mm-sku-14085102/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 350N profile XPZ, SPZ and Z (10) 1 groove Dw 90mm SKU: 14085101](https://maedler.in/product/v-belt-tensioner-350n-profile-xpz-spz-and-z-10-1-groove-dw-90mm-sku-14085101/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [distance bush TS steel zinc plated inner diameter 20mm outer diameter 30mm length 15mm SKU: 14082015](https://maedler.in/product/distance-bush-ts-steel-zinc-plated-inner-diameter-20mm-outer-diameter-30mm-length-15mm-sku-14082015/): Material: Steel, zinc-plated.As spare part or as an additional distance bush for double-sided mounting. - [distance bush TS steel zinc plated inner diameter 20mm outer diameter 30mm length 10mm SKU: 14082010](https://maedler.in/product/distance-bush-ts-steel-zinc-plated-inner-diameter-20mm-outer-diameter-30mm-length-10mm-sku-14082010/): Material: Steel, zinc-plated.As spare part or as an additional distance bush for double-sided mounting. - [distance bush TS steel zinc plated inner diameter 12mm outer diameter 20mm length 24mm SKU: 14081224](https://maedler.in/product/distance-bush-ts-steel-zinc-plated-inner-diameter-12mm-outer-diameter-20mm-length-24mm-sku-14081224/): Material: Steel, zinc-plated.As spare part or as an additional distance bush for double-sided mounting. - [distance bush TS steel zinc plated inner diameter 12mm outer diameter 20mm length 12mm SKU: 14081212](https://maedler.in/product/distance-bush-ts-steel-zinc-plated-inner-diameter-12mm-outer-diameter-20mm-length-12mm-sku-14081212/): Material: Steel, zinc-plated.As spare part or as an additional distance bush for double-sided mounting. - [distance bush TS steel zinc plated inner diameter 10mm outer diameter 17mm length 9mm SKU: 14081009](https://maedler.in/product/distance-bush-ts-steel-zinc-plated-inner-diameter-10mm-outer-diameter-17mm-length-9mm-sku-14081009/): Material: Steel, zinc-plated.As spare part or as an additional distance bush for double-sided mounting. - [distance bush TS steel zinc plated inner diameter 8mm outer diameter 13mm length 7mm SKU: 14080807](https://maedler.in/product/distance-bush-ts-steel-zinc-plated-inner-diameter-8mm-outer-diameter-13mm-length-7mm-sku-14080807/): Material: Steel, zinc-plated.As spare part or as an additional distance bush for double-sided mounting. - [distance bush TS steel zinc plated inner diameter 5mm outer diameter 10mm length 5mm SKU: 14080505](https://maedler.in/product/distance-bush-ts-steel-zinc-plated-inner-diameter-5mm-outer-diameter-10mm-length-5mm-sku-14080505/): Material: Steel, zinc-plated.As spare part or as an additional distance bush for double-sided mounting. - [support bracket for tensioner size 3 SKU: 14080301](https://maedler.in/product/support-bracket-for-tensioner-size-3-sku-14080301/): Material: Steel, blue painted.This support enabels an easy mounting of the tensioning element or idler wheel to the machine. The hole A is for fastening the tensioner with it´s central screw. The mounting can be done at the front side or back side of the support. For any other purposes, the both holes B can be used to fix other parts instead of a tensioner. - [support bracket for tensioner size 2 SKU: 14080201](https://maedler.in/product/support-bracket-for-tensioner-size-2-sku-14080201/): Material: Steel, blue painted.This support enabels an easy mounting of the tensioning element or idler wheel to the machine. The hole A is for fastening the tensioner with it´s central screw. The mounting can be done at the front side or back side of the support. For any other purposes, the both holes B can be used to fix other parts instead of a tensioner. - [support bracket for tensioner size 1 SKU: 14080101](https://maedler.in/product/support-bracket-for-tensioner-size-1-sku-14080101/): Material: Steel, blue painted.This support enabels an easy mounting of the tensioning element or idler wheel to the machine. The hole A is for fastening the tensioner with it´s central screw. The mounting can be done at the front side or back side of the support. For any other purposes, the both holes B can be used to fix other parts instead of a tensioner. - [support bracket for tensioner size 0 SKU: 14080001](https://maedler.in/product/support-bracket-for-tensioner-size-0-sku-14080001/): Material: Steel, blue painted.This support enabels an easy mounting of the tensioning element or idler wheel to the machine. The hole A is for fastening the tensioner with it´s central screw. The mounting can be done at the front side or back side of the support. For any other purposes, the both holes B can be used to fix other parts instead of a tensioner. - [Motorbase MB 38 x 300 for motors size 132 and 160 SKU: 14059038](https://maedler.in/product/motorbase-mb-38-x-300-for-motors-size-132-and-160-sku-14059038/): Material RMW 27: Steel parts painted blue, screws and other components zinc-plated.Material RMW 38: Steel parts, screws and other components zinc-plated.The motorbase are used to optimize belt drives.They ensure a constant belt tension and an even torque transmission.Switching off the system for manual post-tensioning is no longer necessary.The maintenance effort is minimized. Oscillation, vibrations and load peaks are absorbed.The motorbase consist of motor plate, side supports, pretensioning device and rubber suspension elements.Other sizes, ATEX- and special versions on request. For motor sizes not listed, please contact us. - [Motorbase MB 27 x 120 for motors size 90, 100 and 112 SKU: 14059027](https://maedler.in/product/motorbase-mb-27-x-120-for-motors-size-90-100-and-112-sku-14059027/): Material RMW 27: Steel parts painted blue, screws and other components zinc-plated.Material RMW 38: Steel parts, screws and other components zinc-plated.The motorbase are used to optimize belt drives.They ensure a constant belt tension and an even torque transmission.Switching off the system for manual post-tensioning is no longer necessary.The maintenance effort is minimized. Oscillation, vibrations and load peaks are absorbed.The motorbase consist of motor plate, side supports, pretensioning device and rubber suspension elements.Other sizes, ATEX- and special versions on request. For motor sizes not listed, please contact us. - [Internal freewheels TSS-8 inner diameter 8mm outer diameter 24mm width 8mm with keyway at inner ring SKU: TSS8](https://maedler.in/product/internal-freewheels-tss-8-inner-diameter-8mm-outer-diameter-24mm-width-8mm-with-keyway-at-inner-ring-sku-tss8/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-60 inner diameter 60mm outer diameter 110mm width 22mm with keyway at inner ring SKU: TSS60](https://maedler.in/product/internal-freewheels-tss-60-inner-diameter-60mm-outer-diameter-110mm-width-22mm-with-keyway-at-inner-ring-sku-tss60/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-50 inner diameter 50mm outer diameter 90mm width 20mm with keyway at inner ring SKU: TSS50](https://maedler.in/product/internal-freewheels-tss-50-inner-diameter-50mm-outer-diameter-90mm-width-20mm-with-keyway-at-inner-ring-sku-tss50/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-45 inner diameter 45mm outer diameter 85mm width 19mm with keyway at inner ring SKU: TSS45](https://maedler.in/product/internal-freewheels-tss-45-inner-diameter-45mm-outer-diameter-85mm-width-19mm-with-keyway-at-inner-ring-sku-tss45/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-40 inner diameter 40mm outer diameter 80mm width 18mm with keyway at inner ring SKU: TSS40](https://maedler.in/product/internal-freewheels-tss-40-inner-diameter-40mm-outer-diameter-80mm-width-18mm-with-keyway-at-inner-ring-sku-tss40/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-35 inner diameter 35mm outer diameter 72mm width 17mm with keyway at inner ring SKU: TSS35](https://maedler.in/product/internal-freewheels-tss-35-inner-diameter-35mm-outer-diameter-72mm-width-17mm-with-keyway-at-inner-ring-sku-tss35/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-30 inner diameter 30mm outer diameter 62mm width 16mm with keyway at inner ring SKU: TSS30](https://maedler.in/product/internal-freewheels-tss-30-inner-diameter-30mm-outer-diameter-62mm-width-16mm-with-keyway-at-inner-ring-sku-tss30/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-25 inner diameter 25mm outer diameter 52mm width 15mm with keyway at inner ring SKU: TSS25](https://maedler.in/product/internal-freewheels-tss-25-inner-diameter-25mm-outer-diameter-52mm-width-15mm-with-keyway-at-inner-ring-sku-tss25/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-20 inner diameter 20mm outer diameter 47mm width 14mm with keyway at inner ring SKU: TSS20](https://maedler.in/product/internal-freewheels-tss-20-inner-diameter-20mm-outer-diameter-47mm-width-14mm-with-keyway-at-inner-ring-sku-tss20/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-15 inner diameter 15mm outer diameter 35mm width 11mm with keyway at inner ring SKU: TSS15](https://maedler.in/product/internal-freewheels-tss-15-inner-diameter-15mm-outer-diameter-35mm-width-11mm-with-keyway-at-inner-ring-sku-tss15/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-12 inner diameter 12mm outer diameter 32mm width 10mm with keyway at inner ring SKU: TSS12](https://maedler.in/product/internal-freewheels-tss-12-inner-diameter-12mm-outer-diameter-32mm-width-10mm-with-keyway-at-inner-ring-sku-tss12/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TSS-10 inner diameter 10mm outer diameter 30mm width 9mm with keyway at inner ring SKU: TSS10](https://maedler.in/product/internal-freewheels-tss-10-inner-diameter-10mm-outer-diameter-30mm-width-9mm-with-keyway-at-inner-ring-sku-tss10/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-60 inner diameter 60mm outer diameter 130mm width 46mm with keyway at inner ring and radial keyways at outer ring SKU: TFS60](https://maedler.in/product/internal-freewheels-tfs-60-inner-diameter-60mm-outer-diameter-130mm-width-46mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs60/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-50 inner diameter 50mm outer diameter 110mm width 40mm with keyway at inner ring and radial keyways at outer ring SKU: TFS50](https://maedler.in/product/internal-freewheels-tfs-50-inner-diameter-50mm-outer-diameter-110mm-width-40mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs50/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-45 inner diameter 45mm outer diameter 100mm width 36mm with keyway at inner ring and radial keyways at outer ring SKU: TFS45](https://maedler.in/product/internal-freewheels-tfs-45-inner-diameter-45mm-outer-diameter-100mm-width-36mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs45/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-40 inner diameter 40mm outer diameter 90mm width 33mm with keyway at inner ring and radial keyways at outer ring SKU: TFS40](https://maedler.in/product/internal-freewheels-tfs-40-inner-diameter-40mm-outer-diameter-90mm-width-33mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs40/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-35 inner diameter 35mm outer diameter 80mm width 31mm with keyway at inner ring and radial keyways at outer ring SKU: TFS35](https://maedler.in/product/internal-freewheels-tfs-35-inner-diameter-35mm-outer-diameter-80mm-width-31mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs35/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-30 inner diameter 30mm outer diameter 72mm width 27mm with keyway at inner ring and radial keyways at outer ring SKU: TFS30](https://maedler.in/product/internal-freewheels-tfs-30-inner-diameter-30mm-outer-diameter-72mm-width-27mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs30/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-25 inner diameter 25mm outer diameter 62mm width 24mm with keyway at inner ring and radial keyways at outer ring SKU: TFS25](https://maedler.in/product/internal-freewheels-tfs-25-inner-diameter-25mm-outer-diameter-62mm-width-24mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs25/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-20 inner diameter 20mm outer diameter 52mm width 21mm with keyway at inner ring and radial keyways at outer ring SKU: TFS20](https://maedler.in/product/internal-freewheels-tfs-20-inner-diameter-20mm-outer-diameter-52mm-width-21mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs20/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-17 inner diameter 17mm outer diameter 47mm width 19mm with keyway at inner ring and radial keyways at outer ring SKU: TFS17](https://maedler.in/product/internal-freewheels-tfs-17-inner-diameter-17mm-outer-diameter-47mm-width-19mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs17/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-15 inner diameter 15mm outer diameter 42mm width 18mm with keyway at inner ring and radial keyways at outer ring SKU: TFS15](https://maedler.in/product/internal-freewheels-tfs-15-inner-diameter-15mm-outer-diameter-42mm-width-18mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs15/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Internal freewheels TFS-12 inner diameter 12mm outer diameter 35mm width 13mm with keyway at inner ring and radial keyways at outer ring SKU: TFS12](https://maedler.in/product/internal-freewheels-tfs-12-inner-diameter-12mm-outer-diameter-35mm-width-13mm-with-keyway-at-inner-ring-and-radial-keyways-at-outer-ring-sku-tfs12/): These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides.Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.Temperature range: approx. -10°C to + 50°C.Other versions on request. - [Integrated freewheel BSEU70-70 European type inner diameter 70mm outer diameter 165mm width 59mm with keyway at inner ring SKU: BSEU70-70](https://maedler.in/product/integrated-freewheel-bseu70-70-european-type-inner-diameter-70mm-outer-diameter-165mm-width-59mm-with-keyway-at-inner-ring-sku-bseu70-70/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU70-65 European type inner diameter 65mm outer diameter 165mm width 59mm with keyway at inner ring SKU: BSEU70-65](https://maedler.in/product/integrated-freewheel-bseu70-65-european-type-inner-diameter-65mm-outer-diameter-165mm-width-59mm-with-keyway-at-inner-ring-sku-bseu70-65/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU70-60 European type inner diameter 60mm outer diameter 165mm width 59mm with keyway at inner ring SKU: BSEU70-60](https://maedler.in/product/integrated-freewheel-bseu70-60-european-type-inner-diameter-60mm-outer-diameter-165mm-width-59mm-with-keyway-at-inner-ring-sku-bseu70-60/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU70-55 European type inner diameter 55mm outer diameter 165mm width 59mm with keyway at inner ring SKU: BSEU70-55](https://maedler.in/product/integrated-freewheel-bseu70-55-european-type-inner-diameter-55mm-outer-diameter-165mm-width-59mm-with-keyway-at-inner-ring-sku-bseu70-55/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU70-50 European type inner diameter 50mm outer diameter 165mm width 59mm with keyway at inner ring SKU: BSEU70-50](https://maedler.in/product/integrated-freewheel-bseu70-50-european-type-inner-diameter-50mm-outer-diameter-165mm-width-59mm-with-keyway-at-inner-ring-sku-bseu70-50/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU70-45 European type inner diameter 45mm outer diameter 165mm width 59mm with keyway at inner ring SKU: BSEU70-45](https://maedler.in/product/integrated-freewheel-bseu70-45-european-type-inner-diameter-45mm-outer-diameter-165mm-width-59mm-with-keyway-at-inner-ring-sku-bseu70-45/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU40-40 European type inner diameter 40mm outer diameter 118mm width 55mm with keyway at inner ring SKU: BSEU40-40](https://maedler.in/product/integrated-freewheel-bseu40-40-european-type-inner-diameter-40mm-outer-diameter-118mm-width-55mm-with-keyway-at-inner-ring-sku-bseu40-40/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU40-35 European type inner diameter 35mm outer diameter 118mm width 55mm with keyway at inner ring SKU: BSEU40-35](https://maedler.in/product/integrated-freewheel-bseu40-35-european-type-inner-diameter-35mm-outer-diameter-118mm-width-55mm-with-keyway-at-inner-ring-sku-bseu40-35/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU40-30 European type inner diameter 30mm outer diameter 118mm width 55mm with keyway at inner ring SKU: BSEU40-30](https://maedler.in/product/integrated-freewheel-bseu40-30-european-type-inner-diameter-30mm-outer-diameter-118mm-width-55mm-with-keyway-at-inner-ring-sku-bseu40-30/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU40-25 European type inner diameter 25mm outer diameter 118mm width 55mm with keyway at inner ring SKU: BSEU40-25](https://maedler.in/product/integrated-freewheel-bseu40-25-european-type-inner-diameter-25mm-outer-diameter-118mm-width-55mm-with-keyway-at-inner-ring-sku-bseu40-25/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU40-20 European type inner diameter 20mm outer diameter 118mm width 55mm with keyway at inner ring SKU: BSEU40-20](https://maedler.in/product/integrated-freewheel-bseu40-20-european-type-inner-diameter-20mm-outer-diameter-118mm-width-55mm-with-keyway-at-inner-ring-sku-bseu40-20/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU25-25 European type inner diameter 25mm outer diameter 83mm width 35mm with keyway at inner ring SKU: BSEU25-25](https://maedler.in/product/integrated-freewheel-bseu25-25-european-type-inner-diameter-25mm-outer-diameter-83mm-width-35mm-with-keyway-at-inner-ring-sku-bseu25-25/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Integrated freewheel BSEU25-20 European type inner diameter 20mm outer diameter 83mm width 35mm with keyway at inner ring SKU: BSEU25-20](https://maedler.in/product/integrated-freewheel-bseu25-20-european-type-inner-diameter-20mm-outer-diameter-83mm-width-35mm-with-keyway-at-inner-ring-sku-bseu25-20/): he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications.Keyway: according to DIN 6885-1.Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring.Lubrication: Lubricated for life with low temperature grease.Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us.Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway.When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks.Use the frame or a pin to eliminate outer race rotation.Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage.A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel.Other versions on request. - [Ball bearing freewheel BB40-2K-K inner diameter 40mm outer diameter 80mm width 22mm with keyways at inner and outer ring SKU: BB40-2K-K](https://maedler.in/product/ball-bearing-freewheel-bb40-2k-k-inner-diameter-40mm-outer-diameter-80mm-width-22mm-with-keyways-at-inner-and-outer-ring-sku-bb40-2k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 2KK: With keyway on inner ring according to DIN 6885-3 and additionally with groove on the outer ring.The keyways are included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB40-2GD 1K-K inner diameter 40mm outer diameter 80mm width 27mm with lip seals and keyway SKU: BB40-2GD1K-K](https://maedler.in/product/ball-bearing-freewheel-bb40-2gd-1k-k-inner-diameter-40mm-outer-diameter-80mm-width-27mm-with-lip-seals-and-keyway-sku-bb40-2gd1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: As design BB, but 5mm wider and with lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway t1 must be manufactured correspondingly deeper than specified in the DIN standard.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB40-2GD inner diameter 40mm outer diameter 80mm width 27mm with lip seals SKU: BB40-2GD](https://maedler.in/product/ball-bearing-freewheel-bb40-2gd-inner-diameter-40mm-outer-diameter-80mm-width-27mm-with-lip-seals-sku-bb40-2gd/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: Standard freewheels without keyways. This version is 5mm wider than the BB version. Lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request. - [Ball bearing freewheel BB40-1K-K inner diameter 40mm outer diameter 80mm width 22mm with keyway at the inner ring SKU: BB40-1K-K](https://maedler.in/product/ball-bearing-freewheel-bb40-1k-k-inner-diameter-40mm-outer-diameter-80mm-width-22mm-with-keyway-at-the-inner-ring-sku-bb40-1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1)  The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB40 inner diameter 40mm outer diameter 80mm width 22mm without keyway SKU: BB40](https://maedler.in/product/ball-bearing-freewheel-bb40-inner-diameter-40mm-outer-diameter-80mm-width-22mm-without-keyway-sku-bb40/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Standard freewheels without keyways. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm. - [Ball bearing freewheel BB35-2K-K inner diameter 35mm outer diameter 72mm width 17mm with keyways at inner and outer ring SKU: BB35-2K-K](https://maedler.in/product/ball-bearing-freewheel-bb35-2k-k-inner-diameter-35mm-outer-diameter-72mm-width-17mm-with-keyways-at-inner-and-outer-ring-sku-bb35-2k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 2KK: With keyway on inner ring according to DIN 6885-3 and additionally with groove on the outer ring.The keyways are included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB35-2GD 1K-K inner diameter 35mm outer diameter 72mm width 22mm with lip seals and keyway SKU: BB35-2GD1K-K](https://maedler.in/product/ball-bearing-freewheel-bb35-2gd-1k-k-inner-diameter-35mm-outer-diameter-72mm-width-22mm-with-lip-seals-and-keyway-sku-bb35-2gd1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: As design BB, but 5mm wider and with lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway t1 must be manufactured correspondingly deeper than specified in the DIN standard.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB35-2GD inner diameter 35mm outer diameter 72mm width 22mm with lip seals SKU: BB35-2GD](https://maedler.in/product/ball-bearing-freewheel-bb35-2gd-inner-diameter-35mm-outer-diameter-72mm-width-22mm-with-lip-seals-sku-bb35-2gd/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: Standard freewheels without keyways. This version is 5mm wider than the BB version. Lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request. - [Ball bearing freewheel BB35-1K-K inner diameter 35mm outer diameter 72mm width 17mm with keyway at the inner ring SKU: BB35-1K-K](https://maedler.in/product/ball-bearing-freewheel-bb35-1k-k-inner-diameter-35mm-outer-diameter-72mm-width-17mm-with-keyway-at-the-inner-ring-sku-bb35-1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1)  The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB35 inner diameter 35mm outer diameter 72mm width 17mm without keyway SKU: BB35](https://maedler.in/product/ball-bearing-freewheel-bb35-inner-diameter-35mm-outer-diameter-72mm-width-17mm-without-keyway-sku-bb35/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Standard freewheels without keyways. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm. - [Ball bearing freewheel BB30-2K-K inner diameter 30mm outer diameter 62mm width 16mm with keyways at inner and outer ring SKU: BB30-2K-K](https://maedler.in/product/ball-bearing-freewheel-bb30-2k-k-inner-diameter-30mm-outer-diameter-62mm-width-16mm-with-keyways-at-inner-and-outer-ring-sku-bb30-2k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 2KK: With keyway on inner ring according to DIN 6885-3 and additionally with groove on the outer ring.The keyways are included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB30-2GD 1K-K inner diameter 30mm outer diameter 62mm width 21mm with lip seals and keyway SKU: BB30-2GD1K-K](https://maedler.in/product/ball-bearing-freewheel-bb30-2gd-1k-k-inner-diameter-30mm-outer-diameter-62mm-width-21mm-with-lip-seals-and-keyway-sku-bb30-2gd1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: As design BB, but 5mm wider and with lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway t1 must be manufactured correspondingly deeper than specified in the DIN standard.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB30-2GD inner diameter 30mm outer diameter 62mm width 21mm with lip seals SKU: BB30-2GD](https://maedler.in/product/ball-bearing-freewheel-bb30-2gd-inner-diameter-30mm-outer-diameter-62mm-width-21mm-with-lip-seals-sku-bb30-2gd/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: Standard freewheels without keyways. This version is 5mm wider than the BB version. Lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request. - [Ball bearing freewheel BB30-1K-K inner diameter 30mm outer diameter 62mm width 16mm with keyway at the inner ring SKU: BB30-1K-K](https://maedler.in/product/ball-bearing-freewheel-bb30-1k-k-inner-diameter-30mm-outer-diameter-62mm-width-16mm-with-keyway-at-the-inner-ring-sku-bb30-1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1)  The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB30 inner diameter 30mm outer diameter 62mm width 16mm without keyway SKU: BB30](https://maedler.in/product/ball-bearing-freewheel-bb30-inner-diameter-30mm-outer-diameter-62mm-width-16mm-without-keyway-sku-bb30/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Standard freewheels without keyways. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm. - [Ball bearing freewheel BB25-2K-K inner diameter 25mm outer diameter 52mm width 15mm with keyways at inner and outer ring SKU: BB25-2K-K](https://maedler.in/product/ball-bearing-freewheel-bb25-2k-k-inner-diameter-25mm-outer-diameter-52mm-width-15mm-with-keyways-at-inner-and-outer-ring-sku-bb25-2k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 2KK: With keyway on inner ring according to DIN 6885-3 and additionally with groove on the outer ring.The keyways are included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB25-2GD 1K-K inner diameter 25mm outer diameter 52mm width 20mm with lip seals and keyway SKU: BB25-2GD1K-K](https://maedler.in/product/ball-bearing-freewheel-bb25-2gd-1k-k-inner-diameter-25mm-outer-diameter-52mm-width-20mm-with-lip-seals-and-keyway-sku-bb25-2gd1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: As design BB, but 5mm wider and with lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway t1 must be manufactured correspondingly deeper than specified in the DIN standard.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB25-2GD inner diameter 25mm outer diameter 52mm width 20mm with lip seals SKU: BB25-2GD](https://maedler.in/product/ball-bearing-freewheel-bb25-2gd-inner-diameter-25mm-outer-diameter-52mm-width-20mm-with-lip-seals-sku-bb25-2gd/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: Standard freewheels without keyways. This version is 5mm wider than the BB version. Lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request. - [Ball bearing freewheel BB25-1K-K inner diameter 25mm outer diameter 52mm width 15mm with keyway at the inner ring SKU: BB25-1K-K](https://maedler.in/product/ball-bearing-freewheel-bb25-1k-k-inner-diameter-25mm-outer-diameter-52mm-width-15mm-with-keyway-at-the-inner-ring-sku-bb25-1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1)  The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB25 inner diameter 25mm outer diameter 52mm width 15mm without keyway SKU: BB25](https://maedler.in/product/ball-bearing-freewheel-bb25-inner-diameter-25mm-outer-diameter-52mm-width-15mm-without-keyway-sku-bb25/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Standard freewheels without keyways. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm. - [Ball bearing freewheel BB20-2K-K inner diameter 20mm outer diameter 47mm width 14mm with keyways at inner and outer ring SKU: BB20-2K-K](https://maedler.in/product/ball-bearing-freewheel-bb20-2k-k-inner-diameter-20mm-outer-diameter-47mm-width-14mm-with-keyways-at-inner-and-outer-ring-sku-bb20-2k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 2KK: With keyway on inner ring according to DIN 6885-3 and additionally with groove on the outer ring.The keyways are included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB20-2GD 1K-K inner diameter 20mm outer diameter 47mm width 19mm with lip seals and keyway SKU: BB20-2GD1K-K](https://maedler.in/product/ball-bearing-freewheel-bb20-2gd-1k-k-inner-diameter-20mm-outer-diameter-47mm-width-19mm-with-lip-seals-and-keyway-sku-bb20-2gd1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: As design BB, but 5mm wider and with lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway t1 must be manufactured correspondingly deeper than specified in the DIN standard.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB20-2GD inner diameter 20mm outer diameter 47mm width 19mm with lip seals SKU: BB20-2GD](https://maedler.in/product/ball-bearing-freewheel-bb20-2gd-inner-diameter-20mm-outer-diameter-47mm-width-19mm-with-lip-seals-sku-bb20-2gd/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: Standard freewheels without keyways. This version is 5mm wider than the BB version. Lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request. - [Ball bearing freewheel BB20-1K-K inner diameter 20mm outer diameter 47mm width 14mm with keyway at the inner ring SKU: BB20-1K-K](https://maedler.in/product/ball-bearing-freewheel-bb20-1k-k-inner-diameter-20mm-outer-diameter-47mm-width-14mm-with-keyway-at-the-inner-ring-sku-bb20-1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1)  The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB20 inner diameter 20mm outer diameter 47mm width 14mm without keyway SKU: BB20](https://maedler.in/product/ball-bearing-freewheel-bb20-inner-diameter-20mm-outer-diameter-47mm-width-14mm-without-keyway-sku-bb20/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Standard freewheels without keyways. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm. - [Ball bearing freewheel BB17-2K-K inner diameter 17mm outer diameter 40mm width 12mm with keyways at inner and outer ring SKU: BB17-2K-K](https://maedler.in/product/ball-bearing-freewheel-bb17-2k-k-inner-diameter-17mm-outer-diameter-40mm-width-12mm-with-keyways-at-inner-and-outer-ring-sku-bb17-2k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 2KK: With keyway on inner ring according to DIN 6885-3 and additionally with groove on the outer ring.The keyways are included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB17-2GD 1K-K inner diameter 17mm outer diameter 40mm width 17mm with lip seals and keyway SKU: BB17-2GD1K-K](https://maedler.in/product/ball-bearing-freewheel-bb17-2gd-1k-k-inner-diameter-17mm-outer-diameter-40mm-width-17mm-with-lip-seals-and-keyway-sku-bb17-2gd1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: As design BB, but 5mm wider and with lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway t1 must be manufactured correspondingly deeper than specified in the DIN standard.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB17-2GD inner diameter 17mm outer diameter 40mm width 17mm with lip seals SKU: BB17-2GD](https://maedler.in/product/ball-bearing-freewheel-bb17-2gd-inner-diameter-17mm-outer-diameter-40mm-width-17mm-with-lip-seals-sku-bb17-2gd/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: Standard freewheels without keyways. This version is 5mm wider than the BB version. Lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request. - [Ball bearing freewheel BB17-1K-K inner diameter 17mm outer diameter 40mm width 12mm with keyway at the inner ring SKU: BB17-1K-K](https://maedler.in/product/ball-bearing-freewheel-bb17-1k-k-inner-diameter-17mm-outer-diameter-40mm-width-12mm-with-keyway-at-the-inner-ring-sku-bb17-1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1)  The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB17 inner diameter 17mm outer diameter 40mm width 12mm without keyway SKU: BB17](https://maedler.in/product/ball-bearing-freewheel-bb17-inner-diameter-17mm-outer-diameter-40mm-width-12mm-without-keyway-sku-bb17/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Standard freewheels without keyways. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm. - [Ball bearing freewheel BB15-2K-K inner diameter 15mm outer diameter 35mm width 11mm with keyways at inner and outer ring SKU: BB15-2K-K](https://maedler.in/product/ball-bearing-freewheel-bb15-2k-k-inner-diameter-15mm-outer-diameter-35mm-width-11mm-with-keyways-at-inner-and-outer-ring-sku-bb15-2k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 2KK: With keyway on inner ring according to DIN 6885-3 and additionally with groove on the outer ring.The keyways are included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB15-2GD 1K-K inner diameter 15mm outer diameter 35mm width 16mm with lip seals and keyway SKU: BB15-2GD1K-K](https://maedler.in/product/ball-bearing-freewheel-bb15-2gd-1k-k-inner-diameter-15mm-outer-diameter-35mm-width-16mm-with-lip-seals-and-keyway-sku-bb15-2gd1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: As design BB, but 5mm wider and with lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1) The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway t1 must be manufactured correspondingly deeper than specified in the DIN standard.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB15-2GD inner diameter 15mm outer diameter 35mm width 16mm with lip seals SKU: BB15-2GD](https://maedler.in/product/ball-bearing-freewheel-bb15-2gd-inner-diameter-15mm-outer-diameter-35mm-width-16mm-with-lip-seals-sku-bb15-2gd/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB-2GD: Standard freewheels without keyways. This version is 5mm wider than the BB version. Lip seal on both sides against dust and splash water.Version 1KK: With keyway on inner ring according to DIN 6885-3.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request. - [Ball bearing freewheel BB15-1K-K inner diameter 15mm outer diameter 35mm width 11mm with keyway at the inner ring SKU: BB15-1K-K](https://maedler.in/product/ball-bearing-freewheel-bb15-1k-k-inner-diameter-15mm-outer-diameter-35mm-width-11mm-with-keyway-at-the-inner-ring-sku-bb15-1k-k/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Design BB: Standard freewheels. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Version 1KK: With keyway on inner ring according to DIN 6885-3. The key is included in the delivery. Please refer to the footnotes for the keyways.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.1)  The keyway depth t2 is 0,5mm shallower than specified in DIN 6885-3. When using a DIN parallel keyway  t1 must be manufactured correspondingly deeper than specified in the DIN standard.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm.3) Contrary to the above specifications, the keyway is according to DIN 6885-1. - [Ball bearing freewheel BB15 inner diameter 15mm outer diameter 35mm width 11mm without keyway SKU: BB15](https://maedler.in/product/ball-bearing-freewheel-bb15-inner-diameter-15mm-outer-diameter-35mm-width-11mm-without-keyway-sku-bb15/): These sprag freewheels with integrated ball bearings in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They are installed in housings provided by the customer.Standard freewheels without keyways. Sealed on the sprag side with a z-washer. On the bearing side, the freewheel closes with the bearing cage. The BB design has the same dimensions as ball bearing series 62.Lubrication: The freewheels are filled with grease for normal operating conditions and are maintenance-free. Do not use greases or lubricants with EP additives.Temperature range: -30°C to + 100°C.Other versions on request.2) The dimension B does not correspond to the ball bearing 6208 with the dimensions 40 x 80 x 18mm. - [5/3-directional control valve pilot actuated Norgren V63D7DDA-XA020 G1/2 SKU: 903015-20717](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v63d7dda-xa020-g1-2-sku-903015-20717/): ManufacturePartnumber V63D7DDA-XA020 Function COE Actuation Air/Air Port Size G1/2 Flow Rate 2300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 16 Width [mm] 40 Height [mm] 70 Weight [kg] 1,10 CATALOG PRODUCT PAGE CAD FILES (download) - [5/3-directional control valve pilot actuated Norgren V63D6DDA-XA020 G1/2 SKU: 903015-20716](https://maedler.in/product/5-3-directional-control-valve-pilot-actuated-norgren-v63d6dda-xa020-g1-2-sku-903015-20716/): ManufacturePartnumber V63D6DDA-XA020 Function APB Actuation Air/Air Port Size G1/2 Flow Rate 2300 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 216 Width [mm] 40 Height [mm] 70 Weight [kg] 1,10 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V63D5DDA-XA020 G1/2 SKU: 903015-20715](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v63d5dda-xa020-g1-2-sku-903015-20715/): ManufacturePartnumber V63D5DDA-XA020 Function – Actuation Air/Air Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 186 Width [mm] 35 Height [mm] 65 Weight [kg] 0,87 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve pilot actuated Norgren V63D5D7A-XA090 G1/2 SKU: 903015-20714](https://maedler.in/product/5-2-directional-control-valve-pilot-actuated-norgren-v63d5d7a-xa090-g1-2-sku-903015-20714/): ManufacturePartnumber V63D5D7A-XA090 Function – Actuation Air/Spring Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 10 bar Voltage – Manual override – Plug Interface – Length [mm] 200 Width [mm] 35 Height [mm] 65 Weight [kg] 0,92 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V63D4DDA-XA020 G1/2 SKU: 903015-20713](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v63d4dda-xa020-g1-2-sku-903015-20713/): ManufacturePartnumber V63D4DDA-XA020 Function NC Actuation Air/Air Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 16 bar Voltage – Manual override – Plug Interface – Length [mm] 148 Width [mm] 35 Height [mm] 65 Weight [kg] 0,68 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V63D3D7A-XA090 G1/2 SKU: 903015-20712](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v63d3d7a-xa090-g1-2-sku-903015-20712/): ManufacturePartnumber V63D3D7A-XA090 Function NO Actuation Air/Spring Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 16 bar Voltage – Manual override – Plug Interface – Length [mm] 162 Width [mm] 35 Height [mm] 65 Weight [kg] 0,75 CATALOG PRODUCT PAGE CAD FILES (download) - [3/2-directional control valve pilot actuated Norgren V63D4D7A-XA090 G1/2 SKU: 903015-20711](https://maedler.in/product/3-2-directional-control-valve-pilot-actuated-norgren-v63d4d7a-xa090-g1-2-sku-903015-20711/): ManufacturePartnumber V63D4D7A-XA090 Function NC Actuation Air/Spring Port Size G1/2 Flow Rate 4500 l/min Max Pressure -0,9 … 16 bar Voltage – Manual override – Plug Interface – Length [mm] 162 Width [mm] 35 Height [mm] 65 Weight [kg] 0,75 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D511A-A319J G1/2 Voltage 220/240 V AC SKU: 903015-20709](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a319j-g1-2-voltage-220-240-v-ac-sku-903015-20709/): ManufacturePartnumber V63D511A-A319J Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 3 Plug Interface J Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D511A-A318J G1/2 Voltage 110/120 V AC SKU: 903015-20708](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a318j-g1-2-voltage-110-120-v-ac-sku-903015-20708/): ManufacturePartnumber V63D511A-A318J Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 3 Plug Interface J Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D511A-A313L G1/2 Voltage 24 V DC SKU: 903015-20707](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a313l-g1-2-voltage-24-v-dc-sku-903015-20707/): ManufacturePartnumber V63D511A-A313L Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface L Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D511A-A313J G1/2 Voltage 24 V DC SKU: 903015-20706](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a313j-g1-2-voltage-24-v-dc-sku-903015-20706/): ManufacturePartnumber V63D511A-A313J Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 24 V d.c. 2W Manual override 3 Plug Interface J Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D511A-A219L G1/2 Voltage 220/240 V AC SKU: 903015-20705](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a219l-g1-2-voltage-220-240-v-ac-sku-903015-20705/): ManufacturePartnumber V63D511A-A219L Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface L Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D511A-A219J G1/2 Voltage 220/240 V AC SKU: 903015-20704](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a219j-g1-2-voltage-220-240-v-ac-sku-903015-20704/): ManufacturePartnumber V63D511A-A219J Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 220/240 V a.c. (50/60 Hz) 6/5 VA Manual override 2 Plug Interface J Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [5/2-directional control valve solenoid actuated Norgren V63D511A-A218L G1/2 Voltage 110/120 V AC SKU: 903015-20703](https://maedler.in/product/5-2-directional-control-valve-solenoid-actuated-norgren-v63d511a-a218l-g1-2-voltage-110-120-v-ac-sku-903015-20703/): ManufacturePartnumber V63D511A-A218L Function – Actuation Sol/Sol External Port Size G1/2 Flow Rate 4500 l/min Max Pressure 2 … 10 bar Voltage 110/120 V a.c. (50/60 Hz) 4/2,5 VA Manual override 2 Plug Interface L Length [mm] 257 Width [mm] 35 Height [mm] 65 Weight [kg] 0,98 CATALOG PRODUCT PAGE CAD FILES (download) - [Polyurethane timing belt AT10 width 32mm Lw 1400mm 140 teeth 32 AT10/1400 SKU: 16882200](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1400mm-140-teeth-32-at10-1400-sku-16882200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1320mm 132 teeth 32 AT10/1320 SKU: 16882100](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1320mm-132-teeth-32-at10-1320-sku-16882100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1250mm 125 teeth 32 AT10/1250 SKU: 16882000](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1250mm-125-teeth-32-at10-1250-sku-16882000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1210mm 121 teeth 32 AT10/1210 SKU: 16881900](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1210mm-121-teeth-32-at10-1210-sku-16881900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1150mm 115 teeth 32 AT10/1150 SKU: 16881800](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1150mm-115-teeth-32-at10-1150-sku-16881800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1080mm 108 teeth 32 AT10/1080 SKU: 16881700](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1080mm-108-teeth-32-at10-1080-sku-16881700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1050mm 105 teeth 32 AT10/1050 SKU: 16881600](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1050mm-105-teeth-32-at10-1050-sku-16881600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1010mm 101 teeth 32 AT10/1010 SKU: 16881500](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1010mm-101-teeth-32-at10-1010-sku-16881500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 980mm 98 teeth 32 AT10/980 SKU: 16881400](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-980mm-98-teeth-32-at10-980-sku-16881400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 960mm 96 teeth 32 AT10/960 SKU: 16881300](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-960mm-96-teeth-32-at10-960-sku-16881300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 920mm 92 teeth 32 AT10/920 SKU: 16881200](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-920mm-92-teeth-32-at10-920-sku-16881200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 890mm 89 teeth 32 AT10/890 SKU: 16881100](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-890mm-89-teeth-32-at10-890-sku-16881100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 840mm 84 teeth 32 AT10/840 SKU: 16881000](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-840mm-84-teeth-32-at10-840-sku-16881000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 810mm 81 teeth 32 AT10/810 SKU: 16880900](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-810mm-81-teeth-32-at10-810-sku-16880900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 800mm 80 teeth 32 AT10/800 SKU: 16880800](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-800mm-80-teeth-32-at10-800-sku-16880800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 780mm 78 teeth 32 AT10/780 SKU: 16880700](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-780mm-78-teeth-32-at10-780-sku-16880700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 730mm 73 teeth 32 AT10/730 SKU: 16880600](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-730mm-73-teeth-32-at10-730-sku-16880600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 700mm 70 teeth 32 AT10/700 SKU: 16880500](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-700mm-70-teeth-32-at10-700-sku-16880500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 660mm 66 teeth 32 AT10/660 SKU: 16880400](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-660mm-66-teeth-32-at10-660-sku-16880400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 610mm 61 teeth 32 AT10/610 SKU: 16880300](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-610mm-61-teeth-32-at10-610-sku-16880300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 560mm 56 teeth 32 AT10/560 SKU: 16880200](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-560mm-56-teeth-32-at10-560-sku-16880200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 500mm 50 teeth 32 AT10/500 SKU: 16880100](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-500mm-50-teeth-32-at10-500-sku-16880100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm 32AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16880001](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-32at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16880001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 32mm 32 AT10 open length with tensile members from steel packed 2 x 16mm SKU: 16880000](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-32-at10-open-length-with-tensile-members-from-steel-packed-2-x-16mm-sku-16880000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT10 belt width 25mm SKU: 16879900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-25mm-sku-16879900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Timing belt pulley from steel AT10 96 teeth belt width 32mm for taper bush 2517 SKU: 16877496](https://maedler.in/product/timing-belt-pulley-from-steel-at10-96-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877496/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 84 teeth belt width 32mm for taper bush 2517 SKU: 16877484](https://maedler.in/product/timing-belt-pulley-from-steel-at10-84-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877484/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 72 teeth belt width 32mm for taper bush 2517 SKU: 16877472](https://maedler.in/product/timing-belt-pulley-from-steel-at10-72-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877472/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 60 teeth belt width 32mm for taper bush 2517 SKU: 16877460](https://maedler.in/product/timing-belt-pulley-from-steel-at10-60-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877460/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 48 teeth belt width 32mm for taper bush 2517 SKU: 16877448](https://maedler.in/product/timing-belt-pulley-from-steel-at10-48-teeth-belt-width-32mm-for-taper-bush-2517-sku-16877448/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 44 teeth belt width 32mm for taper bush 2012 SKU: 16877444](https://maedler.in/product/timing-belt-pulley-from-steel-at10-44-teeth-belt-width-32mm-for-taper-bush-2012-sku-16877444/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 40 teeth belt width 32mm for taper bush 2012 SKU: 16877440](https://maedler.in/product/timing-belt-pulley-from-steel-at10-40-teeth-belt-width-32mm-for-taper-bush-2012-sku-16877440/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 36 teeth belt width 32mm for taper bush 2012 SKU: 16877436](https://maedler.in/product/timing-belt-pulley-from-steel-at10-36-teeth-belt-width-32mm-for-taper-bush-2012-sku-16877436/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 32 teeth belt width 32mm for taper bush 1615 SKU: 16877432](https://maedler.in/product/timing-belt-pulley-from-steel-at10-32-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877432/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 30 teeth belt width 32mm for taper bush 1615 SKU: 16877430](https://maedler.in/product/timing-belt-pulley-from-steel-at10-30-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877430/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 28 teeth belt width 32mm for taper bush 1615 SKU: 16877428](https://maedler.in/product/timing-belt-pulley-from-steel-at10-28-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877428/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 27 teeth belt width 32mm for taper bush 1615 SKU: 16877427](https://maedler.in/product/timing-belt-pulley-from-steel-at10-27-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877427/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 26 teeth belt width 32mm for taper bush 1615 SKU: 16877426](https://maedler.in/product/timing-belt-pulley-from-steel-at10-26-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877426/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 25 teeth belt width 32mm for taper bush 1615 SKU: 16877425](https://maedler.in/product/timing-belt-pulley-from-steel-at10-25-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877425/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 24 teeth belt width 32mm for taper bush 1615 SKU: 16877424](https://maedler.in/product/timing-belt-pulley-from-steel-at10-24-teeth-belt-width-32mm-for-taper-bush-1615-sku-16877424/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 22 teeth belt width 32mm for taper bush 1210 SKU: 16877422](https://maedler.in/product/timing-belt-pulley-from-steel-at10-22-teeth-belt-width-32mm-for-taper-bush-1210-sku-16877422/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 20 teeth belt width 32mm for taper bush 1108 SKU: 16877420](https://maedler.in/product/timing-belt-pulley-from-steel-at10-20-teeth-belt-width-32mm-for-taper-bush-1108-sku-16877420/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 19 teeth belt width 32mm for taper bush 1108 SKU: 16877419](https://maedler.in/product/timing-belt-pulley-from-steel-at10-19-teeth-belt-width-32mm-for-taper-bush-1108-sku-16877419/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 18 teeth belt width 32mm for taper bush 1008 SKU: 16877418](https://maedler.in/product/timing-belt-pulley-from-steel-at10-18-teeth-belt-width-32mm-for-taper-bush-1008-sku-16877418/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 96 teeth belt width 25mm for taper bush 2517 SKU: 16877396](https://maedler.in/product/timing-belt-pulley-from-steel-at10-96-teeth-belt-width-25mm-for-taper-bush-2517-sku-16877396/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 84 teeth belt width 25mm for taper bush 2517 SKU: 16877384](https://maedler.in/product/timing-belt-pulley-from-steel-at10-84-teeth-belt-width-25mm-for-taper-bush-2517-sku-16877384/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 72 teeth belt width 25mm for taper bush 2517 SKU: 16877372](https://maedler.in/product/timing-belt-pulley-from-steel-at10-72-teeth-belt-width-25mm-for-taper-bush-2517-sku-16877372/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 60 teeth belt width 25mm for taper bush 2012 SKU: 16877360](https://maedler.in/product/timing-belt-pulley-from-steel-at10-60-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877360/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 48 teeth belt width 25mm for taper bush 2012 SKU: 16877348](https://maedler.in/product/timing-belt-pulley-from-steel-at10-48-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877348/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 44 teeth belt width 25mm for taper bush 2012 SKU: 16877344](https://maedler.in/product/timing-belt-pulley-from-steel-at10-44-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877344/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 40 teeth belt width 25mm for taper bush 2012 SKU: 16877340](https://maedler.in/product/timing-belt-pulley-from-steel-at10-40-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877340/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 36 teeth belt width 25mm for taper bush 2012 SKU: 16877336](https://maedler.in/product/timing-belt-pulley-from-steel-at10-36-teeth-belt-width-25mm-for-taper-bush-2012-sku-16877336/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 32 teeth belt width 25mm for taper bush 1610 SKU: 16877332](https://maedler.in/product/timing-belt-pulley-from-steel-at10-32-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877332/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 30 teeth belt width 25mm for taper bush 1610 SKU: 16877330](https://maedler.in/product/timing-belt-pulley-from-steel-at10-30-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877330/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 28 teeth belt width 25mm for taper bush 1610 SKU: 16877328](https://maedler.in/product/timing-belt-pulley-from-steel-at10-28-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877328/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 27 teeth belt width 25mm for taper bush 1610 SKU: 16877327](https://maedler.in/product/timing-belt-pulley-from-steel-at10-27-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877327/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 26 teeth belt width 25mm for taper bush 1610 SKU: 16877326](https://maedler.in/product/timing-belt-pulley-from-steel-at10-26-teeth-belt-width-25mm-for-taper-bush-1610-sku-16877326/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 25 teeth belt width 25mm for taper bush 1108 SKU: 16877325](https://maedler.in/product/timing-belt-pulley-from-steel-at10-25-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877325/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 24 teeth belt width 25mm for taper bush 1108 SKU: 16877324](https://maedler.in/product/timing-belt-pulley-from-steel-at10-24-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877324/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 22 teeth belt width 25mm for taper bush 1108 SKU: 16877322](https://maedler.in/product/timing-belt-pulley-from-steel-at10-22-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877322/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 20 teeth belt width 25mm for taper bush 1108 SKU: 16877320](https://maedler.in/product/timing-belt-pulley-from-steel-at10-20-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877320/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 19 teeth belt width 25mm for taper bush 1108 SKU: 16877319](https://maedler.in/product/timing-belt-pulley-from-steel-at10-19-teeth-belt-width-25mm-for-taper-bush-1108-sku-16877319/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 18 teeth belt width 25mm for taper bush 1008 SKU: 16877318](https://maedler.in/product/timing-belt-pulley-from-steel-at10-18-teeth-belt-width-25mm-for-taper-bush-1008-sku-16877318/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 96 teeth belt width 16mm for taper bush 2517 SKU: 16877296](https://maedler.in/product/timing-belt-pulley-from-steel-at10-96-teeth-belt-width-16mm-for-taper-bush-2517-sku-16877296/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 84 teeth belt width 16mm for taper bush 2517 SKU: 16877284](https://maedler.in/product/timing-belt-pulley-from-steel-at10-84-teeth-belt-width-16mm-for-taper-bush-2517-sku-16877284/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 72 teeth belt width 16mm for taper bush 2517 SKU: 16877272](https://maedler.in/product/timing-belt-pulley-from-steel-at10-72-teeth-belt-width-16mm-for-taper-bush-2517-sku-16877272/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 64 teeth belt width 16mm for taper bush 2517 SKU: 16877264](https://maedler.in/product/timing-belt-pulley-from-steel-at10-64-teeth-belt-width-16mm-for-taper-bush-2517-sku-16877264/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 60 teeth belt width 16mm for taper bush 2012 SKU: 16877260](https://maedler.in/product/timing-belt-pulley-from-steel-at10-60-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877260/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 56 teeth belt width 16mm for taper bush 2012 SKU: 16877256](https://maedler.in/product/timing-belt-pulley-from-steel-at10-56-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877256/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 48 teeth belt width 16mm for taper bush 2012 SKU: 16877248](https://maedler.in/product/timing-belt-pulley-from-steel-at10-48-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877248/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 44 teeth belt width 16mm for taper bush 2012 SKU: 16877244](https://maedler.in/product/timing-belt-pulley-from-steel-at10-44-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877244/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 42 teeth belt width 16mm for taper bush 2012 SKU: 16877242](https://maedler.in/product/timing-belt-pulley-from-steel-at10-42-teeth-belt-width-16mm-for-taper-bush-2012-sku-16877242/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 40 teeth belt width 16mm for taper bush 1610 SKU: 16877240](https://maedler.in/product/timing-belt-pulley-from-steel-at10-40-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877240/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 36 teeth belt width 16mm for taper bush 1610 SKU: 16877236](https://maedler.in/product/timing-belt-pulley-from-steel-at10-36-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877236/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 32 teeth belt width 16mm for taper bush 1610 SKU: 16877232](https://maedler.in/product/timing-belt-pulley-from-steel-at10-32-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877232/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 30 teeth belt width 16mm for taper bush 1610 SKU: 16877230](https://maedler.in/product/timing-belt-pulley-from-steel-at10-30-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877230/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 28 teeth belt width 16mm for taper bush 1610 SKU: 16877228](https://maedler.in/product/timing-belt-pulley-from-steel-at10-28-teeth-belt-width-16mm-for-taper-bush-1610-sku-16877228/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 27 teeth belt width 16mm for taper bush 1210 SKU: 16877227](https://maedler.in/product/timing-belt-pulley-from-steel-at10-27-teeth-belt-width-16mm-for-taper-bush-1210-sku-16877227/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 26 teeth belt width 16mm for taper bush 1210 SKU: 16877226](https://maedler.in/product/timing-belt-pulley-from-steel-at10-26-teeth-belt-width-16mm-for-taper-bush-1210-sku-16877226/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 25 teeth belt width 16mm for taper bush 1210 SKU: 16877225](https://maedler.in/product/timing-belt-pulley-from-steel-at10-25-teeth-belt-width-16mm-for-taper-bush-1210-sku-16877225/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 24 teeth belt width 16mm for taper bush 1210 SKU: 16877224](https://maedler.in/product/timing-belt-pulley-from-steel-at10-24-teeth-belt-width-16mm-for-taper-bush-1210-sku-16877224/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 22 teeth belt width 16mm for taper bush 1108 SKU: 16877222](https://maedler.in/product/timing-belt-pulley-from-steel-at10-22-teeth-belt-width-16mm-for-taper-bush-1108-sku-16877222/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 20 teeth belt width 16mm for taper bush 1108 SKU: 16877220](https://maedler.in/product/timing-belt-pulley-from-steel-at10-20-teeth-belt-width-16mm-for-taper-bush-1108-sku-16877220/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 19 teeth belt width 16mm for taper bush 1108 SKU: 16877219](https://maedler.in/product/timing-belt-pulley-from-steel-at10-19-teeth-belt-width-16mm-for-taper-bush-1108-sku-16877219/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley from steel AT10 18 teeth belt width 16mm for taper bush 1008 SKU: 16877218](https://maedler.in/product/timing-belt-pulley-from-steel-at10-18-teeth-belt-width-16mm-for-taper-bush-1008-sku-16877218/): Material: Steel, phosphated.These steel pulleys offer a much higher wear resistance than standard parts from aluminium.The ready-to-install taper version enables a quick mounting and a fatigue-resistant shaft-to-hub connection.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Polyurethane timing belt AT10 width 25mm Lw 1800mm 180 teeth 25 AT10/1800 SKU: 16872600](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1800mm-180-teeth-25-at10-1800-sku-16872600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1700mm 170 teeth 25 AT10/1700 SKU: 16872500](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1700mm-170-teeth-25-at10-1700-sku-16872500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1600mm 160 teeth 25 AT10/1600 SKU: 16872400](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1600mm-160-teeth-25-at10-1600-sku-16872400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1500mm 150 teeth 25 AT10/1500 SKU: 16872300](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1500mm-150-teeth-25-at10-1500-sku-16872300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1400mm 140 teeth 25 AT10/1400 SKU: 16872200](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1400mm-140-teeth-25-at10-1400-sku-16872200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1320mm 132 teeth 25 AT10/1320 SKU: 16872100](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1320mm-132-teeth-25-at10-1320-sku-16872100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1250mm 125 teeth 25 AT10/1250 SKU: 16872000](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1250mm-125-teeth-25-at10-1250-sku-16872000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1210mm 121 teeth 25 AT10/1210 SKU: 16871900](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1210mm-121-teeth-25-at10-1210-sku-16871900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1150mm 115 teeth 25 AT10/1150 SKU: 16871800](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1150mm-115-teeth-25-at10-1150-sku-16871800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1080mm 108 teeth 25 AT10/1080 SKU: 16871700](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1080mm-108-teeth-25-at10-1080-sku-16871700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1050mm 105 teeth 25 AT10/1050 SKU: 16871600](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1050mm-105-teeth-25-at10-1050-sku-16871600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 1010mm 101 teeth 25 AT10/1010 SKU: 16871500](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-1010mm-101-teeth-25-at10-1010-sku-16871500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 980mm 98 teeth 25 AT10/980 SKU: 16871400](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-980mm-98-teeth-25-at10-980-sku-16871400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 960mm 96 teeth 25 AT10/960 SKU: 16871300](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-960mm-96-teeth-25-at10-960-sku-16871300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 25mm Lw 920mm 92 teeth 25 AT10/920 SKU: 16871200](https://maedler.in/product/polyurethane-timing-belt-at10-width-25mm-lw-920mm-92-teeth-25-at10-920-sku-16871200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [V-belt profile Z (10) LR 2262mm inner length 2240mm SKU: 15067900](https://maedler.in/product/v-belt-profile-z-10-lr-2262mm-inner-length-2240mm-sku-15067900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 2142mm inner length 2120mm SKU: 15067700](https://maedler.in/product/v-belt-profile-z-10-lr-2142mm-inner-length-2120mm-sku-15067700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 2022mm inner length 2000mm SKU: 15067500](https://maedler.in/product/v-belt-profile-z-10-lr-2022mm-inner-length-2000mm-sku-15067500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1922mm inner length 1900mm SKU: 15067200](https://maedler.in/product/v-belt-profile-z-10-lr-1922mm-inner-length-1900mm-sku-15067200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1872mm inner length 1850mm SKU: 15067100](https://maedler.in/product/v-belt-profile-z-10-lr-1872mm-inner-length-1850mm-sku-15067100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1822mm inner length 1800mm SKU: 15067000](https://maedler.in/product/v-belt-profile-z-10-lr-1822mm-inner-length-1800mm-sku-15067000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1772mm inner length 1750mm SKU: 15066800](https://maedler.in/product/v-belt-profile-z-10-lr-1772mm-inner-length-1750mm-sku-15066800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1722mm inner length 1700mm SKU: 15066700](https://maedler.in/product/v-belt-profile-z-10-lr-1722mm-inner-length-1700mm-sku-15066700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1697mm inner length 1675mm SKU: 15066600](https://maedler.in/product/v-belt-profile-z-10-lr-1697mm-inner-length-1675mm-sku-15066600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1673mm inner length 1651mm SKU: 15066500](https://maedler.in/product/v-belt-profile-z-10-lr-1673mm-inner-length-1651mm-sku-15066500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1622mm inner length 1600mm SKU: 15066100](https://maedler.in/product/v-belt-profile-z-10-lr-1622mm-inner-length-1600mm-sku-15066100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1572mm inner length 1550mm SKU: 15065900](https://maedler.in/product/v-belt-profile-z-10-lr-1572mm-inner-length-1550mm-sku-15065900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1522mm inner length 1500mm SKU: 15065800](https://maedler.in/product/v-belt-profile-z-10-lr-1522mm-inner-length-1500mm-sku-15065800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1497mm inner length 1475mm SKU: 15065700](https://maedler.in/product/v-belt-profile-z-10-lr-1497mm-inner-length-1475mm-sku-15065700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1472mm inner length 1450mm SKU: 15065500](https://maedler.in/product/v-belt-profile-z-10-lr-1472mm-inner-length-1450mm-sku-15065500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1422mm inner length 1400mm SKU: 15065400](https://maedler.in/product/v-belt-profile-z-10-lr-1422mm-inner-length-1400mm-sku-15065400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1393mm inner length 1371mm SKU: 15065200](https://maedler.in/product/v-belt-profile-z-10-lr-1393mm-inner-length-1371mm-sku-15065200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1342mm inner length 1320mm SKU: 15065100](https://maedler.in/product/v-belt-profile-z-10-lr-1342mm-inner-length-1320mm-sku-15065100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1317mm inner length 1295mm SKU: 15064900](https://maedler.in/product/v-belt-profile-z-10-lr-1317mm-inner-length-1295mm-sku-15064900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1292mm inner length 1270mm SKU: 15064800](https://maedler.in/product/v-belt-profile-z-10-lr-1292mm-inner-length-1270mm-sku-15064800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1272mm inner length 1250mm SKU: 15064700](https://maedler.in/product/v-belt-profile-z-10-lr-1272mm-inner-length-1250mm-sku-15064700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1247mm inner length 1225mm SKU: 15064500](https://maedler.in/product/v-belt-profile-z-10-lr-1247mm-inner-length-1225mm-sku-15064500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1202mm inner length 1180mm SKU: 15064300](https://maedler.in/product/v-belt-profile-z-10-lr-1202mm-inner-length-1180mm-sku-15064300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1172mm inner length 1150mm SKU: 15064100](https://maedler.in/product/v-belt-profile-z-10-lr-1172mm-inner-length-1150mm-sku-15064100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1142mm inner length 1120mm SKU: 15063900](https://maedler.in/product/v-belt-profile-z-10-lr-1142mm-inner-length-1120mm-sku-15063900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1102mm inner length 1080mm SKU: 15063800](https://maedler.in/product/v-belt-profile-z-10-lr-1102mm-inner-length-1080mm-sku-15063800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1082mm inner length 1060mm SKU: 15063600](https://maedler.in/product/v-belt-profile-z-10-lr-1082mm-inner-length-1060mm-sku-15063600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1052mm inner length 1030mm SKU: 15063500](https://maedler.in/product/v-belt-profile-z-10-lr-1052mm-inner-length-1030mm-sku-15063500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 1022mm inner length 1000mm SKU: 15063300](https://maedler.in/product/v-belt-profile-z-10-lr-1022mm-inner-length-1000mm-sku-15063300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 997mm inner length 975mm SKU: 15063200](https://maedler.in/product/v-belt-profile-z-10-lr-997mm-inner-length-975mm-sku-15063200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 972mm inner length 950mm SKU: 15063100](https://maedler.in/product/v-belt-profile-z-10-lr-972mm-inner-length-950mm-sku-15063100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 947mm inner length 925mm SKU: 15063000](https://maedler.in/product/v-belt-profile-z-10-lr-947mm-inner-length-925mm-sku-15063000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 922mm inner length 900mm SKU: 15062900](https://maedler.in/product/v-belt-profile-z-10-lr-922mm-inner-length-900mm-sku-15062900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 897mm inner length 875mm SKU: 15062800](https://maedler.in/product/v-belt-profile-z-10-lr-897mm-inner-length-875mm-sku-15062800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 872mm inner length 850mm SKU: 15062700](https://maedler.in/product/v-belt-profile-z-10-lr-872mm-inner-length-850mm-sku-15062700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 847mm inner length 825mm SKU: 15062500](https://maedler.in/product/v-belt-profile-z-10-lr-847mm-inner-length-825mm-sku-15062500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 822mm inner length 800mm SKU: 15062400](https://maedler.in/product/v-belt-profile-z-10-lr-822mm-inner-length-800mm-sku-15062400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 797mm inner length 775mm SKU: 15062300](https://maedler.in/product/v-belt-profile-z-10-lr-797mm-inner-length-775mm-sku-15062300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 772mm inner length 750mm SKU: 15062200](https://maedler.in/product/v-belt-profile-z-10-lr-772mm-inner-length-750mm-sku-15062200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 747mm inner length 725mm SKU: 15062100](https://maedler.in/product/v-belt-profile-z-10-lr-747mm-inner-length-725mm-sku-15062100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 732mm inner length 710mm SKU: 15062000](https://maedler.in/product/v-belt-profile-z-10-lr-732mm-inner-length-710mm-sku-15062000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 692mm inner length 670mm SKU: 15061900](https://maedler.in/product/v-belt-profile-z-10-lr-692mm-inner-length-670mm-sku-15061900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 652mm inner length 630mm SKU: 15061800](https://maedler.in/product/v-belt-profile-z-10-lr-652mm-inner-length-630mm-sku-15061800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 622mm inner length 600mm SKU: 15061600](https://maedler.in/product/v-belt-profile-z-10-lr-622mm-inner-length-600mm-sku-15061600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 597mm inner length 575mm SKU: 15061500](https://maedler.in/product/v-belt-profile-z-10-lr-597mm-inner-length-575mm-sku-15061500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 585mm inner length 563mm moulded cogged (toothed) SKU: 15061300](https://maedler.in/product/v-belt-profile-z-10-lr-585mm-inner-length-563mm-moulded-cogged-toothed-sku-15061300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 552mm inner length 530mm moulded cogged (toothed) SKU: 15061100](https://maedler.in/product/v-belt-profile-z-10-lr-552mm-inner-length-530mm-moulded-cogged-toothed-sku-15061100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 522mm inner length 500mm moulded cogged (toothed) SKU: 15060900](https://maedler.in/product/v-belt-profile-z-10-lr-522mm-inner-length-500mm-moulded-cogged-toothed-sku-15060900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 497mm inner length 475mm moulded cogged (toothed) SKU: 15060800](https://maedler.in/product/v-belt-profile-z-10-lr-497mm-inner-length-475mm-moulded-cogged-toothed-sku-15060800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 472mm inner length 450mm moulded cogged (toothed) SKU: 15060600](https://maedler.in/product/v-belt-profile-z-10-lr-472mm-inner-length-450mm-moulded-cogged-toothed-sku-15060600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 447mm inner length 425mm moulded cogged (toothed) SKU: 15060400](https://maedler.in/product/v-belt-profile-z-10-lr-447mm-inner-length-425mm-moulded-cogged-toothed-sku-15060400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 422mm inner length 400mm moulded cogged (toothed) SKU: 15060300](https://maedler.in/product/v-belt-profile-z-10-lr-422mm-inner-length-400mm-moulded-cogged-toothed-sku-15060300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 397mm inner length 375mm moulded cogged (toothed) SKU: 15060200](https://maedler.in/product/v-belt-profile-z-10-lr-397mm-inner-length-375mm-moulded-cogged-toothed-sku-15060200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [Screw set for tensioning roller TS M20x120 steel zinc plated SKU: 140920120](https://maedler.in/product/screw-set-for-tensioning-roller-ts-m20x120-steel-zinc-plated-sku-140920120/): Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8.The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tenioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.1) Screw M5 with 3 normal nuts DIN 934, for support size 0, product no. 14080001; adjusting range 9 mm.2) Mounting without the loose distance bush, which is icluded in the delivery of the tensioning roller set. - [Screw set for tensioning roller TS M20x100 steel zinc plated SKU: 140920100](https://maedler.in/product/screw-set-for-tensioning-roller-ts-m20x100-steel-zinc-plated-sku-140920100/): Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8.The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tenioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.1) Screw M5 with 3 normal nuts DIN 934, for support size 0, product no. 14080001; adjusting range 9 mm.2) Mounting without the loose distance bush, which is icluded in the delivery of the tensioning roller set. - [Screw set for tensioning roller TS M12x90 steel zinc plated SKU: 140912090](https://maedler.in/product/screw-set-for-tensioning-roller-ts-m12x90-steel-zinc-plated-sku-140912090/): Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8.The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tenioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.1) Screw M5 with 3 normal nuts DIN 934, for support size 0, product no. 14080001; adjusting range 9 mm.2) Mounting without the loose distance bush, which is icluded in the delivery of the tensioning roller set. - [Screw set for tensioning roller TS M12x70 steel zinc plated SKU: 140912070](https://maedler.in/product/screw-set-for-tensioning-roller-ts-m12x70-steel-zinc-plated-sku-140912070/): Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8.The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tenioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.1) Screw M5 with 3 normal nuts DIN 934, for support size 0, product no. 14080001; adjusting range 9 mm.2) Mounting without the loose distance bush, which is icluded in the delivery of the tensioning roller set. - [Screw set for tensioning roller TS M10x70 steel zinc plated SKU: 140910070](https://maedler.in/product/screw-set-for-tensioning-roller-ts-m10x70-steel-zinc-plated-sku-140910070/): Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8.The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tenioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.1) Screw M5 with 3 normal nuts DIN 934, for support size 0, product no. 14080001; adjusting range 9 mm.2) Mounting without the loose distance bush, which is icluded in the delivery of the tensioning roller set. - [Screw set for tensioning roller TS M10x55 steel zinc plated SKU: 140910055](https://maedler.in/product/screw-set-for-tensioning-roller-ts-m10x55-steel-zinc-plated-sku-140910055/): Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8.The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tenioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.1) Screw M5 with 3 normal nuts DIN 934, for support size 0, product no. 14080001; adjusting range 9 mm.2) Mounting without the loose distance bush, which is icluded in the delivery of the tensioning roller set. - [Screw set for tensioning roller TS M8x45 steel zinc plated SKU: 140908045](https://maedler.in/product/screw-set-for-tensioning-roller-ts-m8x45-steel-zinc-plated-sku-140908045/): Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8.The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tenioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.1) Screw M5 with 3 normal nuts DIN 934, for support size 0, product no. 14080001; adjusting range 9 mm.2) Mounting without the loose distance bush, which is icluded in the delivery of the tensioning roller set. - [Screw set for tensioning roller TS M5x40 steel zinc plated SKU: 140905040](https://maedler.in/product/screw-set-for-tensioning-roller-ts-m5x40-steel-zinc-plated-sku-140905040/): Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8.The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tenioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.1) Screw M5 with 3 normal nuts DIN 934, for support size 0, product no. 14080001; adjusting range 9 mm.2) Mounting without the loose distance bush, which is icluded in the delivery of the tensioning roller set. - [Screw set for tensioning roller TS M5x35 steel zinc plated SKU: 140905035](https://maedler.in/product/screw-set-for-tensioning-roller-ts-m5x35-steel-zinc-plated-sku-140905035/): Material: Steel, zinc-plated. Screw strength 8.8, nuts strength class 8.The set consists of one screw ISO 4017 / DIN 933, one normal nut DIN 934 and two thin nuts DIN 936.For mounting a tensioning roller TS at a tensioning element, at a support or at a customer´s mounting surface. The alignment can be adjusted (dimension R at our tenioning elements). Tensioning roller TS, screw set and and tensioning element have to be ordered separately.1) Screw M5 with 3 normal nuts DIN 934, for support size 0, product no. 14080001; adjusting range 9 mm.2) Mounting without the loose distance bush, which is icluded in the delivery of the tensioning roller set. - [tensioning roller - idler TS nominal size ø120mm x 54mm with separate distance bush for easy assembly SKU: 14088904](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o120mm-x-54mm-with-separate-distance-bush-for-easy-assembly-sku-14088904/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø120mm x 44mm with separate distance bush for easy assembly SKU: 14088903](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o120mm-x-44mm-with-separate-distance-bush-for-easy-assembly-sku-14088903/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø120mm x 36mm with separate distance bush for easy assembly SKU: 14088902](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o120mm-x-36mm-with-separate-distance-bush-for-easy-assembly-sku-14088902/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø120mm x 28mm with separate distance bush for easy assembly SKU: 14088901](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o120mm-x-28mm-with-separate-distance-bush-for-easy-assembly-sku-14088901/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø80mm x 54mm with separate distance bush for easy assembly SKU: 14088803](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o80mm-x-54mm-with-separate-distance-bush-for-easy-assembly-sku-14088803/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø80mm x 40mm with separate distance bush for easy assembly SKU: 14088802](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o80mm-x-40mm-with-separate-distance-bush-for-easy-assembly-sku-14088802/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø80mm x 28mm with separate distance bush for easy assembly SKU: 14088801](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o80mm-x-28mm-with-separate-distance-bush-for-easy-assembly-sku-14088801/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [Optical Tension Measuring instrument OTM-1, including 2 measuring probes, PC software for calculation of the normal belt frequency and a strong plastic case SKU: 14088800](https://maedler.in/product/optical-tension-measuring-instrument-otm-1-including-2-measuring-probes-pc-software-for-calculation-of-the-normal-belt-frequency-and-a-strong-plastic-case-sku-14088800/): OTM-1 is a precise instrument for contactless measuring of the belt tension in power transmission drives, like toothed belts or V-belts. The use of OTM-1 enables an optimal function and maximum lifetime of belt drives. The measuring results are reliable, recordable and documentable dates, for calculation-based check of the strand force and bearing load of the belt drive application. The OTM-1 is specially useful for mounting and maintenance. It is also a helpful equipment in the quality assurance and at the final inspection of belt drives. Product Description: For power transmission belts which can swing freely; not able for transportation belts lying on a slide rail. Non-contact, optical measuring with pulsed light. Measuring at non-running machine, tapping the belt to swing. Exactly measuring of belt frequency and strand force. Exactly calculation of the set points. Needed for protocolling according to DIN EN ISO 9001ff. User guidance and displaying the measuring results in 10 languages: English, German, French, Spain, Portugese, Swedish, Norwegian, Finnish, Danish. Displaying the measuring results on choice as natural belt frequency in Hz or as strand force in Newton or Pound. Easy and save operation. Compact and handy device. Device testing / re-calibrating can be done by the customer with a 250 Hz tuning fork. Versatile use for different materials: All mechanical pre-tensioned parts can be measured, which are able to swing freely, for example belts, robes, wires, films, cables, tapes, and sheets. Scope of Delivery: Measuring instrument. Plug-in probe for one-hand operation. Measuring probe with cable for limited access space. 9 V battery (9 V accumulator and charger on request). Document with the download link for a PC calculation software in Englisch and German, to calculate the frequency set point. Test certificate. Transport case from shock-resistant, durable ABS.   - [tensioning roller - idler TS nominal size ø60mm x 54mm with separate distance bush for easy assembly SKU: 14088604](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o60mm-x-54mm-with-separate-distance-bush-for-easy-assembly-sku-14088604/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø60mm x 38mm with separate distance bush for easy assembly SKU: 14088603](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o60mm-x-38mm-with-separate-distance-bush-for-easy-assembly-sku-14088603/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø60mm x 31mm with separate distance bush for easy assembly SKU: 14088602](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o60mm-x-31mm-with-separate-distance-bush-for-easy-assembly-sku-14088602/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø60mm x 19mm with separate distance bush for easy assembly SKU: 14088601](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o60mm-x-19mm-with-separate-distance-bush-for-easy-assembly-sku-14088601/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø40mm x 38mm with separate distance bush for easy assembly SKU: 14088404](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o40mm-x-38mm-with-separate-distance-bush-for-easy-assembly-sku-14088404/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø40mm x 28mm with separate distance bush for easy assembly SKU: 14088403](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o40mm-x-28mm-with-separate-distance-bush-for-easy-assembly-sku-14088403/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø40mm x 23mm with separate distance bush for easy assembly SKU: 14088402](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o40mm-x-23mm-with-separate-distance-bush-for-easy-assembly-sku-14088402/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø40mm x 14mm with separate distance bush for easy assembly SKU: 14088401](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o40mm-x-14mm-with-separate-distance-bush-for-easy-assembly-sku-14088401/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø30mm x 28mm with separate distance bush for easy assembly SKU: 14088303](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o30mm-x-28mm-with-separate-distance-bush-for-easy-assembly-sku-14088303/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø30mm x 19mm with separate distance bush for easy assembly SKU: 14088302](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o30mm-x-19mm-with-separate-distance-bush-for-easy-assembly-sku-14088302/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø30mm x 13mm with separate distance bush for easy assembly SKU: 14088301](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o30mm-x-13mm-with-separate-distance-bush-for-easy-assembly-sku-14088301/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø20mm x 13mm with separate distance bush for easy assembly SKU: 14088202](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o20mm-x-13mm-with-separate-distance-bush-for-easy-assembly-sku-14088202/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [tensioning roller - idler TS nominal size ø20mm x 8mm with separate distance bush for easy assembly SKU: 14088201](https://maedler.in/product/tensioning-roller-idler-ts-nominal-size-o20mm-x-8mm-with-separate-distance-bush-for-easy-assembly-sku-14088201/): Material: Aluminium similar to EN AW2017A, one-piece, with turned flanges. Distance bushes and ball bearings DIN 625 from steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or, on its own, it can be used as an idler. It runs on permanently lubricated 2Z ball bearings.One loose, zinc-plated distance bush is included in the delivery (in the drawing on the right side). Support, screw set and tensioning element have to be ordered separately. - [Tensioning roller diameter 90mm SKU: 14087900](https://maedler.in/product/tensioning-roller-diameter-90mm-sku-14087900/): Material: Roller from plastic PA 6. Ball bearings DIN 625 from bearing steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or on its own it can be used as idler. It runs on two permanently lubricated 2-Z ball bearings.Temperature range: -35º to +100ºC. - [Tensioning roller diameter 80mm SKU: 14087800](https://maedler.in/product/tensioning-roller-diameter-80mm-sku-14087800/): Material: Roller from plastic PA 6. Ball bearings DIN 625 from bearing steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or on its own it can be used as idler. It runs on two permanently lubricated 2-Z ball bearings.Temperature range: -35º to +100ºC. - [Tensioning roller diameter 60mm SKU: 14087600](https://maedler.in/product/tensioning-roller-diameter-60mm-sku-14087600/): Material: Roller from plastic PA 6. Ball bearings DIN 625 from bearing steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or on its own it can be used as idler. It runs on two permanently lubricated 2-Z ball bearings.Temperature range: -35º to +100ºC. - [Tensioning roller diameter 40mm SKU: 14087400](https://maedler.in/product/tensioning-roller-diameter-40mm-sku-14087400/): Material: Roller from plastic PA 6. Ball bearings DIN 625 from bearing steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or on its own it can be used as idler. It runs on two permanently lubricated 2-Z ball bearings.Temperature range: -35º to +100ºC. - [Tensioning roller diameter 30mm SKU: 14087200](https://maedler.in/product/tensioning-roller-diameter-30mm-sku-14087200/): Material: Roller from plastic PA 6. Ball bearings DIN 625 from bearing steel.Mounted on a suitable tensioning element, the tensioning roller becomes a ready-to-mount belt tensioner or on its own it can be used as idler. It runs on two permanently lubricated 2-Z ball bearings.Temperature range: -35º to +100ºC. - [V-belt tensioner 1500N profile XPB, SPB and B (17) 3 grooves Dw 140mm SKU: 14085404](https://maedler.in/product/v-belt-tensioner-1500n-profile-xpb-spb-and-b-17-3-grooves-dw-140mm-sku-14085404/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 1500N profile XPB, SPB and B (17) 3 grooves Dw 125mm SKU: 14085403](https://maedler.in/product/v-belt-tensioner-1500n-profile-xpb-spb-and-b-17-3-grooves-dw-125mm-sku-14085403/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 810N profile XPB, SPB and B (17) 2 grooves Dw 125mm SKU: 14085402](https://maedler.in/product/v-belt-tensioner-810n-profile-xpb-spb-and-b-17-2-grooves-dw-125mm-sku-14085402/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 810N profile XPB, SPB and B (17) 1 groove Dw 125mm SKU: 14085401](https://maedler.in/product/v-belt-tensioner-810n-profile-xpb-spb-and-b-17-1-groove-dw-125mm-sku-14085401/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 810N profile XPA, SPA and A (13) 2 grooves Dw 125mm SKU: 14085205](https://maedler.in/product/v-belt-tensioner-810n-profile-xpa-spa-and-a-13-2-grooves-dw-125mm-sku-14085205/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 810N profile XPA, SPA and A (13) 1 groove Dw 125mm SKU: 14085204](https://maedler.in/product/v-belt-tensioner-810n-profile-xpa-spa-and-a-13-1-groove-dw-125mm-sku-14085204/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 810N profile XPA, SPA and A (13) 3 grooves Dw 90mm SKU: 14085203](https://maedler.in/product/v-belt-tensioner-810n-profile-xpa-spa-and-a-13-3-grooves-dw-90mm-sku-14085203/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 810N profile XPA, SPA and A (13) 2 grooves Dw 90mm SKU: 14085202](https://maedler.in/product/v-belt-tensioner-810n-profile-xpa-spa-and-a-13-2-grooves-dw-90mm-sku-14085202/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 810N profile XPA, SPA and A (13) 1 groove Dw 90mm SKU: 14085201](https://maedler.in/product/v-belt-tensioner-810n-profile-xpa-spa-and-a-13-1-groove-dw-90mm-sku-14085201/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 350N profile XPA, SPA and A (13) 2 grooves Dw 90mm SKU: 14085112](https://maedler.in/product/v-belt-tensioner-350n-profile-xpa-spa-and-a-13-2-grooves-dw-90mm-sku-14085112/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 350N profile XPA, SPA and A (13) 1 groove Dw 90mm SKU: 14085111](https://maedler.in/product/v-belt-tensioner-350n-profile-xpa-spa-and-a-13-1-groove-dw-90mm-sku-14085111/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [V-belt tensioner 350N profile XPZ, SPZ and Z (10) 3 grooves Dw 90mm SKU: 14085103](https://maedler.in/product/v-belt-tensioner-350n-profile-xpz-spz-and-z-10-3-grooves-dw-90mm-sku-14085103/): Material: Housings up to Ø 78 mm made of sintered steel, over Ø 78 mm made of grey cast iron GG20, lever St52, V-belt pulley cast steel. Matching narrow V-belts DIN 2215 und DIN 7753.Pulley with sealed ball bearings, permanently lubricated. Measur A of the pulley can be adjusted by distance-washers on the axis, which is screwd onto the tensioner. Can be used for both tensioning directions. - [timing bar AT10 30 teeth length 160mm material 1.4305 SKU: 16899930](https://maedler.in/product/timing-bar-at10-30-teeth-length-160mm-material-1-4305-sku-16899930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 25 teeth length 160mm material 1.4305 SKU: 16899925](https://maedler.in/product/timing-bar-at10-25-teeth-length-160mm-material-1-4305-sku-16899925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 24 teeth length 160mm material 1.4305 SKU: 16899924](https://maedler.in/product/timing-bar-at10-24-teeth-length-160mm-material-1-4305-sku-16899924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 22 teeth length 160mm material 1.4305 SKU: 16899922](https://maedler.in/product/timing-bar-at10-22-teeth-length-160mm-material-1-4305-sku-16899922/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 20 teeth length 160mm material 1.4305 SKU: 16899920](https://maedler.in/product/timing-bar-at10-20-teeth-length-160mm-material-1-4305-sku-16899920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 18 teeth length 160mm material 1.4305 SKU: 16899918](https://maedler.in/product/timing-bar-at10-18-teeth-length-160mm-material-1-4305-sku-16899918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 16 teeth length 160mm material 1.4305 SKU: 16899916](https://maedler.in/product/timing-bar-at10-16-teeth-length-160mm-material-1-4305-sku-16899916/): Material: Stainless steel 1.4305 (AISI 303). - [Fixing plate for timing belts material aluminium AT10 belt width 100mm SKU: 16899901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-100mm-sku-16899901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium AT10 belt width 50mm SKU: 16899900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-50mm-sku-16899900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [timing bar AT10 70 teeth length 160mm material aluminium SKU: 16897000](https://maedler.in/product/timing-bar-at10-70-teeth-length-160mm-material-aluminium-sku-16897000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 60 teeth length 160mm material aluminium SKU: 16896000](https://maedler.in/product/timing-bar-at10-60-teeth-length-160mm-material-aluminium-sku-16896000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 56 teeth length 160mm material aluminium SKU: 16895600](https://maedler.in/product/timing-bar-at10-56-teeth-length-160mm-material-aluminium-sku-16895600/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 52 teeth length 160mm material aluminium SKU: 16895200](https://maedler.in/product/timing-bar-at10-52-teeth-length-160mm-material-aluminium-sku-16895200/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 48 teeth length 160mm material aluminium SKU: 16894800](https://maedler.in/product/timing-bar-at10-48-teeth-length-160mm-material-aluminium-sku-16894800/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 44 teeth length 160mm material aluminium SKU: 16894400](https://maedler.in/product/timing-bar-at10-44-teeth-length-160mm-material-aluminium-sku-16894400/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 42 teeth length 160mm material aluminium SKU: 16894200](https://maedler.in/product/timing-bar-at10-42-teeth-length-160mm-material-aluminium-sku-16894200/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 40 teeth length 160mm material aluminium SKU: 16894000](https://maedler.in/product/timing-bar-at10-40-teeth-length-160mm-material-aluminium-sku-16894000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 38 teeth length 160mm material aluminium SKU: 16893800](https://maedler.in/product/timing-bar-at10-38-teeth-length-160mm-material-aluminium-sku-16893800/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 36 teeth length 160mm material aluminium SKU: 16893600](https://maedler.in/product/timing-bar-at10-36-teeth-length-160mm-material-aluminium-sku-16893600/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 34 teeth length 160mm material aluminium SKU: 16893400](https://maedler.in/product/timing-bar-at10-34-teeth-length-160mm-material-aluminium-sku-16893400/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 32 teeth length 160mm material aluminium SKU: 16893200](https://maedler.in/product/timing-bar-at10-32-teeth-length-160mm-material-aluminium-sku-16893200/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 30 teeth length 160mm material aluminium SKU: 16893000](https://maedler.in/product/timing-bar-at10-30-teeth-length-160mm-material-aluminium-sku-16893000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 28 teeth length 160mm material aluminium SKU: 16892800](https://maedler.in/product/timing-bar-at10-28-teeth-length-160mm-material-aluminium-sku-16892800/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 27 teeth length 160mm material aluminium SKU: 16892700](https://maedler.in/product/timing-bar-at10-27-teeth-length-160mm-material-aluminium-sku-16892700/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 26 teeth length 160mm material aluminium SKU: 16892600](https://maedler.in/product/timing-bar-at10-26-teeth-length-160mm-material-aluminium-sku-16892600/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 25 teeth length 160mm material aluminium SKU: 16892500](https://maedler.in/product/timing-bar-at10-25-teeth-length-160mm-material-aluminium-sku-16892500/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 24 teeth length 160mm material aluminium SKU: 16892400](https://maedler.in/product/timing-bar-at10-24-teeth-length-160mm-material-aluminium-sku-16892400/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 23 teeth length 160mm material aluminium SKU: 16892300](https://maedler.in/product/timing-bar-at10-23-teeth-length-160mm-material-aluminium-sku-16892300/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 22 teeth length 160mm material aluminium SKU: 16892200](https://maedler.in/product/timing-bar-at10-22-teeth-length-160mm-material-aluminium-sku-16892200/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 21 teeth length 160mm material aluminium SKU: 16892100](https://maedler.in/product/timing-bar-at10-21-teeth-length-160mm-material-aluminium-sku-16892100/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 20 teeth length 160mm material aluminium SKU: 16892000](https://maedler.in/product/timing-bar-at10-20-teeth-length-160mm-material-aluminium-sku-16892000/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 19 teeth length 160mm material aluminium SKU: 16891900](https://maedler.in/product/timing-bar-at10-19-teeth-length-160mm-material-aluminium-sku-16891900/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 18 teeth length 160mm material aluminium SKU: 16891800](https://maedler.in/product/timing-bar-at10-18-teeth-length-160mm-material-aluminium-sku-16891800/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 17 teeth length 160mm material aluminium SKU: 16891700](https://maedler.in/product/timing-bar-at10-17-teeth-length-160mm-material-aluminium-sku-16891700/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 16 teeth length 160mm material aluminium SKU: 16891600](https://maedler.in/product/timing-bar-at10-16-teeth-length-160mm-material-aluminium-sku-16891600/): Material: Aluminium similar EN AW2017A. - [timing bar AT10 15 teeth length 160mm material aluminium SKU: 16891500](https://maedler.in/product/timing-bar-at10-15-teeth-length-160mm-material-aluminium-sku-16891500/): Material: Aluminium similar EN AW2017A. - [Polyurethane timing belt AT10 width 100mm 100AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16890001](https://maedler.in/product/polyurethane-timing-belt-at10-width-100mm-100at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16890001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 100mm 100 AT10 open length with tensile members from steel packed 4 x 25mm SKU: 16890000](https://maedler.in/product/polyurethane-timing-belt-at10-width-100mm-100-at10-open-length-with-tensile-members-from-steel-packed-4-x-25mm-sku-16890000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium AT10 belt width 40mm SKU: 16889901](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-40mm-sku-16889901/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium AT10 belt width 32mm SKU: 16889900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-at10-belt-width-32mm-sku-16889900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt AT10 width 50mm 50AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16886001](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-50at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16886001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 50mm 50 AT10 open length with tensile members from steel packed 2 x 25mm SKU: 16886000](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-50-at10-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16886000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT10 width 50mm Lw 1800mm 180 teeth 50 AT10/1800 SKU: 16885600](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1800mm-180-teeth-50-at10-1800-sku-16885600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1700mm 170 teeth 50 AT10/1700 SKU: 16885500](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1700mm-170-teeth-50-at10-1700-sku-16885500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1600mm 160 teeth 50 AT10/1600 SKU: 16885400](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1600mm-160-teeth-50-at10-1600-sku-16885400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1500mm 150 teeth 50 AT10/1500 SKU: 16885300](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1500mm-150-teeth-50-at10-1500-sku-16885300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1400mm 140 teeth 50 AT10/1400 SKU: 16885200](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1400mm-140-teeth-50-at10-1400-sku-16885200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1320mm 132 teeth 50 AT10/1320 SKU: 16885100](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1320mm-132-teeth-50-at10-1320-sku-16885100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1250mm 125 teeth 50 AT10/1250 SKU: 16885000](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1250mm-125-teeth-50-at10-1250-sku-16885000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1210mm 121 teeth 50 AT10/1210 SKU: 16884900](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1210mm-121-teeth-50-at10-1210-sku-16884900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1150mm 115 teeth 50 AT10/1150 SKU: 16884800](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1150mm-115-teeth-50-at10-1150-sku-16884800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1080mm 108 teeth 50 AT10/1080 SKU: 16884700](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1080mm-108-teeth-50-at10-1080-sku-16884700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1050mm 105 teeth 50 AT10/1050 SKU: 16884600](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1050mm-105-teeth-50-at10-1050-sku-16884600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 1010mm 101 teeth 50 AT10/1010 SKU: 16884500](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-1010mm-101-teeth-50-at10-1010-sku-16884500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 980mm 98 teeth 50 AT10/980 SKU: 16884400](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-980mm-98-teeth-50-at10-980-sku-16884400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 960mm 96 teeth 50 AT10/960 SKU: 16884300](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-960mm-96-teeth-50-at10-960-sku-16884300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 920mm 92 teeth 50 AT10/920 SKU: 16884200](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-920mm-92-teeth-50-at10-920-sku-16884200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 890mm 89 teeth 50 AT10/890 SKU: 16884100](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-890mm-89-teeth-50-at10-890-sku-16884100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm 40AT10 open length PAZ = Polyamide fabric on tooth side SKU: 16884001](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-40at10-open-length-paz-polyamide-fabric-on-tooth-side-sku-16884001/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt AT10 width 50mm Lw 840mm 84 teeth 50 AT10/840 SKU: 16884000](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-840mm-84-teeth-50-at10-840-sku-16884000/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 810mm 81 teeth 50 AT10/810 SKU: 16883900](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-810mm-81-teeth-50-at10-810-sku-16883900/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 800mm 80 teeth 50 AT10/800 SKU: 16883800](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-800mm-80-teeth-50-at10-800-sku-16883800/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 780mm 78 teeth 50 AT10/780 SKU: 16883700](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-780mm-78-teeth-50-at10-780-sku-16883700/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 730mm 73 teeth 50 AT10/730 SKU: 16883600](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-730mm-73-teeth-50-at10-730-sku-16883600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 700mm 70 teeth 50 AT10/700 SKU: 16883500](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-700mm-70-teeth-50-at10-700-sku-16883500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 660mm 66 teeth 50 AT10/660 SKU: 16883400](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-660mm-66-teeth-50-at10-660-sku-16883400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 610mm 61 teeth 50 AT10/610 SKU: 16883300](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-610mm-61-teeth-50-at10-610-sku-16883300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 560mm 56 teeth 50 AT10/560 SKU: 16883200](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-560mm-56-teeth-50-at10-560-sku-16883200/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 50mm Lw 500mm 50 teeth 50 AT10/500 SKU: 16883100](https://maedler.in/product/polyurethane-timing-belt-at10-width-50mm-lw-500mm-50-teeth-50-at10-500-sku-16883100/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1800mm 180 teeth 40 AT10/1800 SKU: 16883026](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1800mm-180-teeth-40-at10-1800-sku-16883026/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1700mm 170 teeth 40 AT10/1700 SKU: 16883025](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1700mm-170-teeth-40-at10-1700-sku-16883025/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1600mm 160 teeth 40 AT10/1600 SKU: 16883024](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1600mm-160-teeth-40-at10-1600-sku-16883024/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1500mm 150 teeth 40 AT10/1500 SKU: 16883023](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1500mm-150-teeth-40-at10-1500-sku-16883023/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1400mm 140 teeth 40 AT10/1400 SKU: 16883022](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1400mm-140-teeth-40-at10-1400-sku-16883022/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1320mm 132 teeth 40 AT10/1320 SKU: 16883021](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1320mm-132-teeth-40-at10-1320-sku-16883021/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1250mm 125 teeth 40 AT10/1250 SKU: 16883020](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1250mm-125-teeth-40-at10-1250-sku-16883020/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1210mm 121 teeth 40 AT10/1210 SKU: 16883019](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1210mm-121-teeth-40-at10-1210-sku-16883019/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1150mm 115 teeth 40 AT10/1150 SKU: 16883018](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1150mm-115-teeth-40-at10-1150-sku-16883018/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1080mm 108 teeth 40 AT10/1080 SKU: 16883017](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1080mm-108-teeth-40-at10-1080-sku-16883017/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1050mm 105 teeth 40 AT10/1050 SKU: 16883016](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1050mm-105-teeth-40-at10-1050-sku-16883016/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 1010mm 101 teeth 40 AT10/1010 SKU: 16883015](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-1010mm-101-teeth-40-at10-1010-sku-16883015/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 980mm 98 teeth 40 AT10/980 SKU: 16883014](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-980mm-98-teeth-40-at10-980-sku-16883014/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 960mm 96 teeth 40 AT10/960 SKU: 16883013](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-960mm-96-teeth-40-at10-960-sku-16883013/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 920mm 92 teeth 40 AT10/920 SKU: 16883012](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-920mm-92-teeth-40-at10-920-sku-16883012/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 890mm 89 teeth 40 AT10/890 SKU: 16883011](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-890mm-89-teeth-40-at10-890-sku-16883011/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 840mm 84 teeth 40 AT10/840 SKU: 16883010](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-840mm-84-teeth-40-at10-840-sku-16883010/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 810mm 81 teeth 40 AT10/810 SKU: 16883009](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-810mm-81-teeth-40-at10-810-sku-16883009/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 800mm 80 teeth 40 AT10/800 SKU: 16883008](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-800mm-80-teeth-40-at10-800-sku-16883008/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 780mm 78 teeth 40 AT10/780 SKU: 16883007](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-780mm-78-teeth-40-at10-780-sku-16883007/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 730mm 73 teeth 40 AT10/730 SKU: 16883006](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-730mm-73-teeth-40-at10-730-sku-16883006/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 700mm 70 teeth 40 AT10/700 SKU: 16883005](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-700mm-70-teeth-40-at10-700-sku-16883005/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 660mm 66 teeth 40 AT10/660 SKU: 16883004](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-660mm-66-teeth-40-at10-660-sku-16883004/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 610mm 61 teeth 40 AT10/610 SKU: 16883003](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-610mm-61-teeth-40-at10-610-sku-16883003/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 560mm 56 teeth 40 AT10/560 SKU: 16883002](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-560mm-56-teeth-40-at10-560-sku-16883002/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm Lw 500mm 50 teeth 40 AT10/500 SKU: 16883001](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-lw-500mm-50-teeth-40-at10-500-sku-16883001/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 40mm 40 AT10 open length with tensile members from steel SKU: 16883000](https://maedler.in/product/polyurethane-timing-belt-at10-width-40mm-40-at10-open-length-with-tensile-members-from-steel-sku-16883000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT10 width 32mm Lw 1800mm 180 teeth 32 AT10/1800 SKU: 16882600](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1800mm-180-teeth-32-at10-1800-sku-16882600/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1700mm 170 teeth 32 AT10/1700 SKU: 16882500](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1700mm-170-teeth-32-at10-1700-sku-16882500/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1600mm 160 teeth 32 AT10/1600 SKU: 16882400](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1600mm-160-teeth-32-at10-1600-sku-16882400/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [Polyurethane timing belt AT10 width 32mm Lw 1500mm 150 teeth 32 AT10/1500 SKU: 16882300](https://maedler.in/product/polyurethane-timing-belt-at10-width-32mm-lw-1500mm-150-teeth-32-at10-1500-sku-16882300/): Material: Cast polyurethane (PU) with steel tensile member. Timing belts in metric dimensions. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Special length: Open-length timing belts made of thermoplastic TPU can be welded to endless belts at customized lengths. - [High performance V-belt XPZ EPDM datum length 1420 mm SKU: 15091420](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1420-mm-sku-15091420/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1412 mm SKU: 15091412](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1412-mm-sku-15091412/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1400 mm SKU: 15091400](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1400-mm-sku-15091400/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1387 mm SKU: 15091387](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1387-mm-sku-15091387/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1362 mm SKU: 15091362](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1362-mm-sku-15091362/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1357 mm SKU: 15091357](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1357-mm-sku-15091357/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1347 mm SKU: 15091347](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1347-mm-sku-15091347/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1340 mm SKU: 15091340](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1340-mm-sku-15091340/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1337 mm SKU: 15091337](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1337-mm-sku-15091337/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1320 mm SKU: 15091320](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1320-mm-sku-15091320/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1312 mm SKU: 15091312](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1312-mm-sku-15091312/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1287 mm SKU: 15091287](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1287-mm-sku-15091287/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1270 mm SKU: 15091270](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1270-mm-sku-15091270/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1262 mm SKU: 15091262](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1262-mm-sku-15091262/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1250 mm SKU: 15091250](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1250-mm-sku-15091250/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1237 mm SKU: 15091237](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1237-mm-sku-15091237/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1212 mm SKU: 15091212](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1212-mm-sku-15091212/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1202 mm SKU: 15091202](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1202-mm-sku-15091202/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1187 mm SKU: 15091187](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1187-mm-sku-15091187/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1180 mm SKU: 15091180](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1180-mm-sku-15091180/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1162 mm SKU: 15091162](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1162-mm-sku-15091162/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1157 mm SKU: 15091157](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1157-mm-sku-15091157/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1150 mm SKU: 15091150](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1150-mm-sku-15091150/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1140 mm SKU: 15091140](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1140-mm-sku-15091140/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1137 mm SKU: 15091137](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1137-mm-sku-15091137/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1120 mm SKU: 15091120](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1120-mm-sku-15091120/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1112 mm SKU: 15091112](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1112-mm-sku-15091112/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1087 mm SKU: 15091087](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1087-mm-sku-15091087/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1080 mm SKU: 15091080](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1080-mm-sku-15091080/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1060 mm SKU: 15091060](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1060-mm-sku-15091060/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1047 mm SKU: 15091047](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1047-mm-sku-15091047/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1037 mm SKU: 15091037](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1037-mm-sku-15091037/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1030 mm SKU: 15091030](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1030-mm-sku-15091030/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1024 mm SKU: 15091024](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1024-mm-sku-15091024/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1012 mm SKU: 15091012](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1012-mm-sku-15091012/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1000 mm SKU: 15091000](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1000-mm-sku-15091000/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 987 mm SKU: 15090987](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-987-mm-sku-15090987/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 975 mm SKU: 15090975](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-975-mm-sku-15090975/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 962 mm SKU: 15090962](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-962-mm-sku-15090962/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 950 mm SKU: 15090950](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-950-mm-sku-15090950/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 937 mm SKU: 15090937](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-937-mm-sku-15090937/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 925 mm SKU: 15090925](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-925-mm-sku-15090925/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 912 mm SKU: 15090912](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-912-mm-sku-15090912/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 900 mm SKU: 15090900](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-900-mm-sku-15090900/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 887 mm SKU: 15090887](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-887-mm-sku-15090887/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 875 mm SKU: 15090875](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-875-mm-sku-15090875/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 862 mm SKU: 15090862](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-862-mm-sku-15090862/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 850 mm SKU: 15090850](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-850-mm-sku-15090850/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 837 mm SKU: 15090837](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-837-mm-sku-15090837/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 825 mm SKU: 15090825](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-825-mm-sku-15090825/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 812 mm SKU: 15090812](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-812-mm-sku-15090812/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 800 mm SKU: 15090800](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-800-mm-sku-15090800/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 787 mm SKU: 15090787](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-787-mm-sku-15090787/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 782 mm SKU: 15090782](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-782-mm-sku-15090782/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 772 mm SKU: 15090772](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-772-mm-sku-15090772/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 762 mm SKU: 15090762](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-762-mm-sku-15090762/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 750 mm SKU: 15090750](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-750-mm-sku-15090750/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 737 mm SKU: 15090737](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-737-mm-sku-15090737/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 722 mm SKU: 15090722](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-722-mm-sku-15090722/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 710 mm SKU: 15090710](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-710-mm-sku-15090710/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 687 mm SKU: 15090687](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-687-mm-sku-15090687/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 670 mm SKU: 15090670](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-670-mm-sku-15090670/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 662 mm SKU: 15090662](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-662-mm-sku-15090662/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 637 mm SKU: 15090637](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-637-mm-sku-15090637/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 630 mm SKU: 15090630](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-630-mm-sku-15090630/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 612 mm SKU: 15090612](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-612-mm-sku-15090612/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 587 mm SKU: 15090587](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-587-mm-sku-15090587/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [V-belt profile SPZ LR 2800mm SKU: 15088300](https://maedler.in/product/v-belt-profile-spz-lr-2800mm-sku-15088300/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 2650mm SKU: 15088100](https://maedler.in/product/v-belt-profile-spz-lr-2650mm-sku-15088100/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 2500mm SKU: 15087900](https://maedler.in/product/v-belt-profile-spz-lr-2500mm-sku-15087900/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 2360mm SKU: 15087700](https://maedler.in/product/v-belt-profile-spz-lr-2360mm-sku-15087700/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 2240mm SKU: 15087500](https://maedler.in/product/v-belt-profile-spz-lr-2240mm-sku-15087500/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 2000mm SKU: 15087200](https://maedler.in/product/v-belt-profile-spz-lr-2000mm-sku-15087200/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1900mm SKU: 15086900](https://maedler.in/product/v-belt-profile-spz-lr-1900mm-sku-15086900/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1800mm SKU: 15086600](https://maedler.in/product/v-belt-profile-spz-lr-1800mm-sku-15086600/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1700mm SKU: 15086300](https://maedler.in/product/v-belt-profile-spz-lr-1700mm-sku-15086300/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1600mm SKU: 15086000](https://maedler.in/product/v-belt-profile-spz-lr-1600mm-sku-15086000/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1500mm SKU: 15085700](https://maedler.in/product/v-belt-profile-spz-lr-1500mm-sku-15085700/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1400mm SKU: 15085400](https://maedler.in/product/v-belt-profile-spz-lr-1400mm-sku-15085400/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1320mm SKU: 15085100](https://maedler.in/product/v-belt-profile-spz-lr-1320mm-sku-15085100/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1250mm SKU: 15084900](https://maedler.in/product/v-belt-profile-spz-lr-1250mm-sku-15084900/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1212mm SKU: 15084700](https://maedler.in/product/v-belt-profile-spz-lr-1212mm-sku-15084700/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1180mm SKU: 15084500](https://maedler.in/product/v-belt-profile-spz-lr-1180mm-sku-15084500/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1120mm SKU: 15084300](https://maedler.in/product/v-belt-profile-spz-lr-1120mm-sku-15084300/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1087mm SKU: 15084100](https://maedler.in/product/v-belt-profile-spz-lr-1087mm-sku-15084100/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1060mm SKU: 15084000](https://maedler.in/product/v-belt-profile-spz-lr-1060mm-sku-15084000/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 1000mm SKU: 15083800](https://maedler.in/product/v-belt-profile-spz-lr-1000mm-sku-15083800/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 950mm SKU: 15083600](https://maedler.in/product/v-belt-profile-spz-lr-950mm-sku-15083600/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 900mm SKU: 15083400](https://maedler.in/product/v-belt-profile-spz-lr-900mm-sku-15083400/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 875mm SKU: 15083200](https://maedler.in/product/v-belt-profile-spz-lr-875mm-sku-15083200/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 850mm SKU: 15083000](https://maedler.in/product/v-belt-profile-spz-lr-850mm-sku-15083000/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 812mm SKU: 15082700](https://maedler.in/product/v-belt-profile-spz-lr-812mm-sku-15082700/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 800mm SKU: 15082500](https://maedler.in/product/v-belt-profile-spz-lr-800mm-sku-15082500/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 762mm SKU: 15082400](https://maedler.in/product/v-belt-profile-spz-lr-762mm-sku-15082400/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 750mm SKU: 15082200](https://maedler.in/product/v-belt-profile-spz-lr-750mm-sku-15082200/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 710mm SKU: 15082000](https://maedler.in/product/v-belt-profile-spz-lr-710mm-sku-15082000/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 670mm SKU: 15081800](https://maedler.in/product/v-belt-profile-spz-lr-670mm-sku-15081800/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPZ LR 630mm SKU: 15081600](https://maedler.in/product/v-belt-profile-spz-lr-630mm-sku-15081600/): Material: Neopren with glass-fibre tensile member. Width b = 9.7 mm. Height h = 8 mm. Width u = 4.2 mm. Smallest medium pulley diametre = 63 mm. Weight per Metre 0.074 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 2522mm inner length 2500mm SKU: 15068200](https://maedler.in/product/v-belt-profile-z-10-lr-2522mm-inner-length-2500mm-sku-15068200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile Z (10) LR 2382mm inner length 2360mm SKU: 15068100](https://maedler.in/product/v-belt-profile-z-10-lr-2382mm-inner-length-2360mm-sku-15068100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 10 mm. Height h = 6 mm. Width u = 5.9 mm. Smallest medium pulley diametre = 50 mm. Weight per Metre 0,064 kg. Inside Length = Reference Length - 22 mm. Outside Length = Inside Length + 35 mm. Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [timing bar HTD 3M 60 teeth length 200mm material aluminium SKU: 17096000](https://maedler.in/product/timing-bar-htd-3m-60-teeth-length-200mm-material-aluminium-sku-17096000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 56 teeth length 200mm material aluminium SKU: 17095600](https://maedler.in/product/timing-bar-htd-3m-56-teeth-length-200mm-material-aluminium-sku-17095600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 54 teeth length 200mm material aluminium SKU: 17095400](https://maedler.in/product/timing-bar-htd-3m-54-teeth-length-200mm-material-aluminium-sku-17095400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 52 teeth length 200mm material aluminium SKU: 17095200](https://maedler.in/product/timing-bar-htd-3m-52-teeth-length-200mm-material-aluminium-sku-17095200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 50 teeth length 200mm material aluminium SKU: 17095000](https://maedler.in/product/timing-bar-htd-3m-50-teeth-length-200mm-material-aluminium-sku-17095000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 48 teeth length 200mm material aluminium SKU: 17094800](https://maedler.in/product/timing-bar-htd-3m-48-teeth-length-200mm-material-aluminium-sku-17094800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 46 teeth length 200mm material aluminium SKU: 17094600](https://maedler.in/product/timing-bar-htd-3m-46-teeth-length-200mm-material-aluminium-sku-17094600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 45 teeth length 200mm material aluminium SKU: 17094500](https://maedler.in/product/timing-bar-htd-3m-45-teeth-length-200mm-material-aluminium-sku-17094500/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 44 teeth length 200mm material aluminium SKU: 17094400](https://maedler.in/product/timing-bar-htd-3m-44-teeth-length-200mm-material-aluminium-sku-17094400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 42 teeth length 200mm material aluminium SKU: 17094200](https://maedler.in/product/timing-bar-htd-3m-42-teeth-length-200mm-material-aluminium-sku-17094200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 40 teeth length 200mm material aluminium SKU: 17094000](https://maedler.in/product/timing-bar-htd-3m-40-teeth-length-200mm-material-aluminium-sku-17094000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 39 teeth length 200mm material aluminium SKU: 17093900](https://maedler.in/product/timing-bar-htd-3m-39-teeth-length-200mm-material-aluminium-sku-17093900/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 38 teeth length 200mm material aluminium SKU: 17093800](https://maedler.in/product/timing-bar-htd-3m-38-teeth-length-200mm-material-aluminium-sku-17093800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 37 teeth length 200mm material aluminium SKU: 17093700](https://maedler.in/product/timing-bar-htd-3m-37-teeth-length-200mm-material-aluminium-sku-17093700/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 36 teeth length 200mm material aluminium SKU: 17093600](https://maedler.in/product/timing-bar-htd-3m-36-teeth-length-200mm-material-aluminium-sku-17093600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 35 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093500](https://maedler.in/product/timing-bar-htd-3m-35-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093500/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 34 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093400](https://maedler.in/product/timing-bar-htd-3m-34-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 33 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093300](https://maedler.in/product/timing-bar-htd-3m-33-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093300/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 32 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093200](https://maedler.in/product/timing-bar-htd-3m-32-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 31 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093100](https://maedler.in/product/timing-bar-htd-3m-31-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093100/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 30 teeth toothed length min. 175mm total length 183mm material aluminium SKU: 17093000](https://maedler.in/product/timing-bar-htd-3m-30-teeth-toothed-length-min-175mm-total-length-183mm-material-aluminium-sku-17093000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 29 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092900](https://maedler.in/product/timing-bar-htd-3m-29-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092900/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 28 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092800](https://maedler.in/product/timing-bar-htd-3m-28-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 27 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092700](https://maedler.in/product/timing-bar-htd-3m-27-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092700/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 26 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092600](https://maedler.in/product/timing-bar-htd-3m-26-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 25 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092500](https://maedler.in/product/timing-bar-htd-3m-25-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092500/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 24 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092400](https://maedler.in/product/timing-bar-htd-3m-24-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 23 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092300](https://maedler.in/product/timing-bar-htd-3m-23-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092300/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 22 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092200](https://maedler.in/product/timing-bar-htd-3m-22-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 21 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092100](https://maedler.in/product/timing-bar-htd-3m-21-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092100/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 20 teeth toothed length min. 150mm total length 165mm material aluminium SKU: 17092000](https://maedler.in/product/timing-bar-htd-3m-20-teeth-toothed-length-min-150mm-total-length-165mm-material-aluminium-sku-17092000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 19 teeth toothed length min. 125mm total length 155mm material aluminium SKU: 17091900](https://maedler.in/product/timing-bar-htd-3m-19-teeth-toothed-length-min-125mm-total-length-155mm-material-aluminium-sku-17091900/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 18 teeth toothed length min. 125mm total length 155mm material aluminium SKU: 17091800](https://maedler.in/product/timing-bar-htd-3m-18-teeth-toothed-length-min-125mm-total-length-155mm-material-aluminium-sku-17091800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 17 teeth toothed length min. 125mm total length 155mm material aluminium SKU: 17091700](https://maedler.in/product/timing-bar-htd-3m-17-teeth-toothed-length-min-125mm-total-length-155mm-material-aluminium-sku-17091700/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 16 teeth toothed length min. 125mm total length 155mm material aluminium SKU: 17091600](https://maedler.in/product/timing-bar-htd-3m-16-teeth-toothed-length-min-125mm-total-length-155mm-material-aluminium-sku-17091600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 15 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 17091500](https://maedler.in/product/timing-bar-htd-3m-15-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-17091500/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 14 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 17091400](https://maedler.in/product/timing-bar-htd-3m-14-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-17091400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 13 teeth toothed lenght min. 100mm total length 125mm material aluminium SKU: 17091300](https://maedler.in/product/timing-bar-htd-3m-13-teeth-toothed-lenght-min-100mm-total-length-125mm-material-aluminium-sku-17091300/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 12 teeth toothed length min. 100mm total length 125mm material aluminium SKU: 17091200](https://maedler.in/product/timing-bar-htd-3m-12-teeth-toothed-length-min-100mm-total-length-125mm-material-aluminium-sku-17091200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 11 teeth toothed length min 75mm total length 100mm material aluminium SKU: 17091100](https://maedler.in/product/timing-bar-htd-3m-11-teeth-toothed-length-min-75mm-total-length-100mm-material-aluminium-sku-17091100/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 10 teeth toothed length min. 75mm total length 100mm material aluminium SKU: 17091000](https://maedler.in/product/timing-bar-htd-3m-10-teeth-toothed-length-min-75mm-total-length-100mm-material-aluminium-sku-17091000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 9 teeth toothed length min. 75mm total length 100mm material aluminium SKU: 17090900](https://maedler.in/product/timing-bar-htd-3m-9-teeth-toothed-length-min-75mm-total-length-100mm-material-aluminium-sku-17090900/): Material: Aluminium similar EN AW2017A. - [Timing belt pulley HTD 3M material aluminium 90 teeth for belt width 15 mm SKU: 17039000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-90-teeth-for-belt-width-15-mm-sku-17039000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 80 teeth for belt width 15 mm SKU: 17038000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-80-teeth-for-belt-width-15-mm-sku-17038000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 72 teeth for belt width 15mm SKU: 17037200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-72-teeth-for-belt-width-15mm-sku-17037200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 60 teeth for belt width 15mm SKU: 17036000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-60-teeth-for-belt-width-15mm-sku-17036000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 52 teeth for belt width 15 mm SKU: 17035200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-52-teeth-for-belt-width-15-mm-sku-17035200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 48 teeth for belt width 15mm SKU: 17034800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-48-teeth-for-belt-width-15mm-sku-17034800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 44 teeth for belt width 15mm SKU: 17034400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-44-teeth-for-belt-width-15mm-sku-17034400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 40 teeth for belt width 15mm SKU: 17034000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-40-teeth-for-belt-width-15mm-sku-17034000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 36 teeth for belt width 15mm SKU: 17033600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-36-teeth-for-belt-width-15mm-sku-17033600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 34 teeth for belt width 15 mm SKU: 17033400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-34-teeth-for-belt-width-15-mm-sku-17033400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 32 teeth for belt width 15mm SKU: 17033200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-32-teeth-for-belt-width-15mm-sku-17033200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 30 teeth for belt width 15mm SKU: 17033000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-30-teeth-for-belt-width-15mm-sku-17033000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 28 teeth for belt width 15mm SKU: 17032800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-28-teeth-for-belt-width-15mm-sku-17032800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 26 teeth for belt width 15mm SKU: 17032600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-26-teeth-for-belt-width-15mm-sku-17032600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 25 teeth for belt width 15 mm SKU: 17032500](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-25-teeth-for-belt-width-15-mm-sku-17032500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 24 teeth for belt width 15mm SKU: 17032400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-24-teeth-for-belt-width-15mm-sku-17032400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 22 teeth for belt width 15mm SKU: 17032200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-22-teeth-for-belt-width-15mm-sku-17032200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 21 teeth for belt width 15mm SKU: 17032100](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-21-teeth-for-belt-width-15mm-sku-17032100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 20 teeth for belt width 15mm SKU: 17032000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-20-teeth-for-belt-width-15mm-sku-17032000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 18 teeth for belt width 15mm SKU: 17031800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-18-teeth-for-belt-width-15mm-sku-17031800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 17 teeth for belt width 15 mm SKU: 17031700](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-17-teeth-for-belt-width-15-mm-sku-17031700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 16 teeth for belt width 15mm SKU: 17031600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-16-teeth-for-belt-width-15mm-sku-17031600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium, 15 teeth for belt width 15mm SKU: 17031500](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-15-teeth-for-belt-width-15mm-sku-17031500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 14 teeth for belt width 15mm SKU: 17031400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-14-teeth-for-belt-width-15mm-sku-17031400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 12 teeth for belt width 15mm SKU: 17031200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-12-teeth-for-belt-width-15mm-sku-17031200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 10 teeth for belt width 15mm SKU: 17031000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-10-teeth-for-belt-width-15mm-sku-17031000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 90 teeth for belt width 9 mm SKU: 17029000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-90-teeth-for-belt-width-9-mm-sku-17029000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 80 teeth for belt width 9 mm SKU: 17028000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-80-teeth-for-belt-width-9-mm-sku-17028000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 72 teeth for belt width 9mm SKU: 17027200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-72-teeth-for-belt-width-9mm-sku-17027200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 60 teeth for belt width 9mm SKU: 17026000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-60-teeth-for-belt-width-9mm-sku-17026000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 52 teeth for belt width 9 mm SKU: 17025200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-52-teeth-for-belt-width-9-mm-sku-17025200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 48 teeth for belt width 9mm SKU: 17024800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-48-teeth-for-belt-width-9mm-sku-17024800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 44 teeth for belt width 9mm SKU: 17024400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-44-teeth-for-belt-width-9mm-sku-17024400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 40 teeth for belt width 9mm SKU: 17024000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-40-teeth-for-belt-width-9mm-sku-17024000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 36 teeth for belt width 9mm SKU: 17023600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-36-teeth-for-belt-width-9mm-sku-17023600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 34 teeth for belt width 9 mm SKU: 17023400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-34-teeth-for-belt-width-9-mm-sku-17023400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 32 teeth for belt width 9mm SKU: 17023200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-32-teeth-for-belt-width-9mm-sku-17023200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 30 teeth for belt width 9mm SKU: 17023000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-30-teeth-for-belt-width-9mm-sku-17023000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 28 teeth for belt width 9mm SKU: 17022800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-28-teeth-for-belt-width-9mm-sku-17022800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 26 teeth for belt width 9mm SKU: 17022600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-26-teeth-for-belt-width-9mm-sku-17022600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 25 teeth for belt width 9 mm SKU: 17022500](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-25-teeth-for-belt-width-9-mm-sku-17022500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 24 teeth for belt width 9mm SKU: 17022400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-24-teeth-for-belt-width-9mm-sku-17022400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 22 teeth for belt width 9mm SKU: 17022200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-22-teeth-for-belt-width-9mm-sku-17022200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 21 teeth for belt width 9mm SKU: 17022100](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-21-teeth-for-belt-width-9mm-sku-17022100/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 20 teeth for belt width 9mm SKU: 17022000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-20-teeth-for-belt-width-9mm-sku-17022000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 18 teeth for belt width 9mm SKU: 17021800](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-18-teeth-for-belt-width-9mm-sku-17021800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 17 teeth for belt width 9 mm SKU: 17021700](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-17-teeth-for-belt-width-9-mm-sku-17021700/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 16 teeth for belt width 9mm SKU: 17021600](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-16-teeth-for-belt-width-9mm-sku-17021600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 15 teeth for belt width 9mm SKU: 17021500](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-15-teeth-for-belt-width-9mm-sku-17021500/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 14 teeth for belt width 9mm SKU: 17021400](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-14-teeth-for-belt-width-9mm-sku-17021400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 12 teeth for belt width 9mm SKU: 17021200](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-12-teeth-for-belt-width-9mm-sku-17021200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 3M material aluminium 10 teeth for belt width 9mm SKU: 17021000](https://maedler.in/product/timing-belt-pulley-htd-3m-material-aluminium-10-teeth-for-belt-width-9mm-sku-17021000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Polyurethane timing belt AT20 width 100mm 100 AT20 open length with tensile members from steel packed 4 x 25mm SKU: 16980000](https://maedler.in/product/polyurethane-timing-belt-at20-width-100mm-100-at20-open-length-with-tensile-members-from-steel-packed-4-x-25mm-sku-16980000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT20 width 75mm 75 AT20 open length with tensile members from steel packed 3 x 25mm SKU: 16970000](https://maedler.in/product/polyurethane-timing-belt-at20-width-75mm-75-at20-open-length-with-tensile-members-from-steel-packed-3-x-25mm-sku-16970000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt AT20 width 50mm 50 AT20 open length with tensile members from steel packed 2 x 25mm SKU: 16960000](https://maedler.in/product/polyurethane-timing-belt-at20-width-50mm-50-at20-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-16960000/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. AT timing belts only run on AT pulleys. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [timing bar AT10 40 teeth length 160mm material 1.4305 SKU: 16899940](https://maedler.in/product/timing-bar-at10-40-teeth-length-160mm-material-1-4305-sku-16899940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 36 teeth length 160mm material 1.4305 SKU: 16899936](https://maedler.in/product/timing-bar-at10-36-teeth-length-160mm-material-1-4305-sku-16899936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar AT10 32 teeth length 160mm material 1.4305 SKU: 16899932](https://maedler.in/product/timing-bar-at10-32-teeth-length-160mm-material-1-4305-sku-16899932/): Material: Stainless steel 1.4305 (AISI 303). - [V-belt profile SPA LR 800mm SKU: 15282500](https://maedler.in/product/v-belt-profile-spa-lr-800mm-sku-15282500/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 757mm SKU: 15282200](https://maedler.in/product/v-belt-profile-spa-lr-757mm-sku-15282200/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 732mm SKU: 15282000](https://maedler.in/product/v-belt-profile-spa-lr-732mm-sku-15282000/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 2530mm inner length 2500mm SKU: 15268500](https://maedler.in/product/v-belt-profile-a-13-lr-2530mm-inner-length-2500mm-sku-15268500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 2390mm inner length 2360mm SKU: 15268300](https://maedler.in/product/v-belt-profile-a-13-lr-2390mm-inner-length-2360mm-sku-15268300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 2270mm inner length 2240mm SKU: 15268100](https://maedler.in/product/v-belt-profile-a-13-lr-2270mm-inner-length-2240mm-sku-15268100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 2150mm inner length 2120mm SKU: 15267900](https://maedler.in/product/v-belt-profile-a-13-lr-2150mm-inner-length-2120mm-sku-15267900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 2030mm inner length 2000mm SKU: 15267700](https://maedler.in/product/v-belt-profile-a-13-lr-2030mm-inner-length-2000mm-sku-15267700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1960mm inner length 1930mm SKU: 15267600](https://maedler.in/product/v-belt-profile-a-13-lr-1960mm-inner-length-1930mm-sku-15267600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1930mm inner length 1900mm SKU: 15267500](https://maedler.in/product/v-belt-profile-a-13-lr-1930mm-inner-length-1900mm-sku-15267500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1884mm inner length 1854mm SKU: 15267400](https://maedler.in/product/v-belt-profile-a-13-lr-1884mm-inner-length-1854mm-sku-15267400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1830mm inner length 1800mm SKU: 15267200](https://maedler.in/product/v-belt-profile-a-13-lr-1830mm-inner-length-1800mm-sku-15267200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1805mm inner length 1775mm SKU: 15267100](https://maedler.in/product/v-belt-profile-a-13-lr-1805mm-inner-length-1775mm-sku-15267100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1780mm inner length 1750mm SKU: 15267000](https://maedler.in/product/v-belt-profile-a-13-lr-1780mm-inner-length-1750mm-sku-15267000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1755mm inner length 1725mm SKU: 15266900](https://maedler.in/product/v-belt-profile-a-13-lr-1755mm-inner-length-1725mm-sku-15266900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1730mm inner length 1700mm SKU: 15266800](https://maedler.in/product/v-belt-profile-a-13-lr-1730mm-inner-length-1700mm-sku-15266800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1706mm inner length 1676mm SKU: 15266700](https://maedler.in/product/v-belt-profile-a-13-lr-1706mm-inner-length-1676mm-sku-15266700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1680mm inner length 1650mm SKU: 15266600](https://maedler.in/product/v-belt-profile-a-13-lr-1680mm-inner-length-1650mm-sku-15266600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1655mm inner length 1625mm SKU: 15266500](https://maedler.in/product/v-belt-profile-a-13-lr-1655mm-inner-length-1625mm-sku-15266500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1630mm inner length 1600mm SKU: 15266400](https://maedler.in/product/v-belt-profile-a-13-lr-1630mm-inner-length-1600mm-sku-15266400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1605mm inner length 1575mm SKU: 15266300](https://maedler.in/product/v-belt-profile-a-13-lr-1605mm-inner-length-1575mm-sku-15266300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1555mm inner length 1525mm SKU: 15266000](https://maedler.in/product/v-belt-profile-a-13-lr-1555mm-inner-length-1525mm-sku-15266000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1530mm inner length 1500mm SKU: 15265900](https://maedler.in/product/v-belt-profile-a-13-lr-1530mm-inner-length-1500mm-sku-15265900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1505mm inner length 1475mm SKU: 15265800](https://maedler.in/product/v-belt-profile-a-13-lr-1505mm-inner-length-1475mm-sku-15265800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1480mm inner length 1450mm SKU: 15265700](https://maedler.in/product/v-belt-profile-a-13-lr-1480mm-inner-length-1450mm-sku-15265700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1430mm inner length 1400mm SKU: 15265500](https://maedler.in/product/v-belt-profile-a-13-lr-1430mm-inner-length-1400mm-sku-15265500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1405mm inner length 1375mm SKU: 15265400](https://maedler.in/product/v-belt-profile-a-13-lr-1405mm-inner-length-1375mm-sku-15265400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1350mm inner length 1320mm SKU: 15265200](https://maedler.in/product/v-belt-profile-a-13-lr-1350mm-inner-length-1320mm-sku-15265200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1330mm inner length 1300mm SKU: 15265100](https://maedler.in/product/v-belt-profile-a-13-lr-1330mm-inner-length-1300mm-sku-15265100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1300mm inner length 1270mm SKU: 15264900](https://maedler.in/product/v-belt-profile-a-13-lr-1300mm-inner-length-1270mm-sku-15264900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1280mm inner length 1250mm SKU: 15264800](https://maedler.in/product/v-belt-profile-a-13-lr-1280mm-inner-length-1250mm-sku-15264800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1255mm inner length 1225mm SKU: 15264700](https://maedler.in/product/v-belt-profile-a-13-lr-1255mm-inner-length-1225mm-sku-15264700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1230mm inner length 1200mm SKU: 15264600](https://maedler.in/product/v-belt-profile-a-13-lr-1230mm-inner-length-1200mm-sku-15264600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1210mm inner length 1180mm SKU: 15264500](https://maedler.in/product/v-belt-profile-a-13-lr-1210mm-inner-length-1180mm-sku-15264500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1180mm inner length 1150mm SKU: 15264300](https://maedler.in/product/v-belt-profile-a-13-lr-1180mm-inner-length-1150mm-sku-15264300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1150mm inner length 1120mm SKU: 15264100](https://maedler.in/product/v-belt-profile-a-13-lr-1150mm-inner-length-1120mm-sku-15264100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1130mm inner length 1100mm SKU: 15264000](https://maedler.in/product/v-belt-profile-a-13-lr-1130mm-inner-length-1100mm-sku-15264000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1090mm inner length 1060mm SKU: 15263800](https://maedler.in/product/v-belt-profile-a-13-lr-1090mm-inner-length-1060mm-sku-15263800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1071mm inner length 1041mm SKU: 15263700](https://maedler.in/product/v-belt-profile-a-13-lr-1071mm-inner-length-1041mm-sku-15263700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1060mm inner length 1030mm SKU: 15263600](https://maedler.in/product/v-belt-profile-a-13-lr-1060mm-inner-length-1030mm-sku-15263600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1030mm inner length 1000mm SKU: 15263500](https://maedler.in/product/v-belt-profile-a-13-lr-1030mm-inner-length-1000mm-sku-15263500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 1005mm inner length 975mm SKU: 15263300](https://maedler.in/product/v-belt-profile-a-13-lr-1005mm-inner-length-975mm-sku-15263300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 980mm inner length 950mm SKU: 15263200](https://maedler.in/product/v-belt-profile-a-13-lr-980mm-inner-length-950mm-sku-15263200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 955mm inner length 925mm SKU: 15263100](https://maedler.in/product/v-belt-profile-a-13-lr-955mm-inner-length-925mm-sku-15263100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 930mm inner length 900mm SKU: 15263000](https://maedler.in/product/v-belt-profile-a-13-lr-930mm-inner-length-900mm-sku-15263000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 905mm inner length 875mm SKU: 15262900](https://maedler.in/product/v-belt-profile-a-13-lr-905mm-inner-length-875mm-sku-15262900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 880mm inner length 850mm SKU: 15262800](https://maedler.in/product/v-belt-profile-a-13-lr-880mm-inner-length-850mm-sku-15262800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 855mm inner length 825mm SKU: 15262600](https://maedler.in/product/v-belt-profile-a-13-lr-855mm-inner-length-825mm-sku-15262600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 830mm inner length 800mm SKU: 15262500](https://maedler.in/product/v-belt-profile-a-13-lr-830mm-inner-length-800mm-sku-15262500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 805mm inner length 775mm SKU: 15262400](https://maedler.in/product/v-belt-profile-a-13-lr-805mm-inner-length-775mm-sku-15262400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 780mm inner length 750mm SKU: 15262300](https://maedler.in/product/v-belt-profile-a-13-lr-780mm-inner-length-750mm-sku-15262300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 760mm inner length 730mm SKU: 15262200](https://maedler.in/product/v-belt-profile-a-13-lr-760mm-inner-length-730mm-sku-15262200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 740mm inner length 710mm SKU: 15262100](https://maedler.in/product/v-belt-profile-a-13-lr-740mm-inner-length-710mm-sku-15262100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 700mm inner length 670mm SKU: 15262000](https://maedler.in/product/v-belt-profile-a-13-lr-700mm-inner-length-670mm-sku-15262000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 660mm inner length 630mm SKU: 15261900](https://maedler.in/product/v-belt-profile-a-13-lr-660mm-inner-length-630mm-sku-15261900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 630mm inner length 600mm SKU: 15261800](https://maedler.in/product/v-belt-profile-a-13-lr-630mm-inner-length-600mm-sku-15261800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 590mm inner length 560mm SKU: 15261500](https://maedler.in/product/v-belt-profile-a-13-lr-590mm-inner-length-560mm-sku-15261500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile A (13) LR 510mm inner length 480mm SKU: 15261000](https://maedler.in/product/v-belt-profile-a-13-lr-510mm-inner-length-480mm-sku-15261000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 13 mm. Height h = 8 mm. Width u = 7.5 mm. Smallest medium pulley diametre = 75 mm. Weight per Meter 0.109 kg. Inside Length = Reference Length - 30 mm Outside Length = Inside Length + 50 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [High performance V-belt XPZ EPDM datum length 2500 mm SKU: 15092500](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-2500-mm-sku-15092500/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 2410 mm SKU: 15092410](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-2410-mm-sku-15092410/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 2360 mm SKU: 15092360](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-2360-mm-sku-15092360/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 2287 mm SKU: 15092287](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-2287-mm-sku-15092287/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 2160 mm SKU: 15092160](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-2160-mm-sku-15092160/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 2137 mm SKU: 15092137](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-2137-mm-sku-15092137/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 2120 mm SKU: 15092120](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-2120-mm-sku-15092120/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 2000 mm SKU: 15092000](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-2000-mm-sku-15092000/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1987 mm SKU: 15091987](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1987-mm-sku-15091987/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1950 mm SKU: 15091950](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1950-mm-sku-15091950/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1937 mm SKU: 15091937](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1937-mm-sku-15091937/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1900 mm SKU: 15091900](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1900-mm-sku-15091900/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1887 mm SKU: 15091887](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1887-mm-sku-15091887/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1862 mm SKU: 15091862](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1862-mm-sku-15091862/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1850 mm SKU: 15091850](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1850-mm-sku-15091850/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1837 mm SKU: 15091837](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1837-mm-sku-15091837/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1812 mm SKU: 15091812](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1812-mm-sku-15091812/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1800 mm SKU: 15091800](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1800-mm-sku-15091800/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1787 mm SKU: 15091787](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1787-mm-sku-15091787/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1762 mm SKU: 15091762](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1762-mm-sku-15091762/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1750 mm SKU: 15091750](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1750-mm-sku-15091750/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1737 mm SKU: 15091737](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1737-mm-sku-15091737/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1700 mm SKU: 15091700](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1700-mm-sku-15091700/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1687 mm SKU: 15091687](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1687-mm-sku-15091687/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1662 mm SKU: 15091662](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1662-mm-sku-15091662/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1650 mm SKU: 15091650](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1650-mm-sku-15091650/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1637 mm SKU: 15091637](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1637-mm-sku-15091637/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1632 mm SKU: 15091632](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1632-mm-sku-15091632/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1612 mm SKU: 15091612](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1612-mm-sku-15091612/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1600 mm SKU: 15091600](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1600-mm-sku-15091600/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1587 mm SKU: 15091587](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1587-mm-sku-15091587/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1562 mm SKU: 15091562](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1562-mm-sku-15091562/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1550 mm SKU: 15091550](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1550-mm-sku-15091550/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1537 mm SKU: 15091537](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1537-mm-sku-15091537/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1520 mm SKU: 15091520](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1520-mm-sku-15091520/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1512 mm SKU: 15091512](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1512-mm-sku-15091512/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1500 mm SKU: 15091500](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1500-mm-sku-15091500/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1487 mm SKU: 15091487](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1487-mm-sku-15091487/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1470 mm SKU: 15091470](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1470-mm-sku-15091470/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1462 mm SKU: 15091462](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1462-mm-sku-15091462/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1450 mm SKU: 15091450](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1450-mm-sku-15091450/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [High performance V-belt XPZ EPDM datum length 1437 mm SKU: 15091437](https://maedler.in/product/high-performance-v-belt-xpz-epdm-datum-length-1437-mm-sku-15091437/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPZ are a good substitute for SPZ and 10. Width b = 9.7 mm. Height h = 8 mm. Smallest medium pulley diametre = 56 mm. Weight per Metre 0.065 kg. - [Neoprene timing belt HTD 3M width 15mm Lw 1263mm 421 teeth SKU: 17138400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1263mm-421-teeth-sku-17138400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 1125mm 375 teeth SKU: 17138000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1125mm-375-teeth-sku-17138000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 1062mm 354 teeth SKU: 17137800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1062mm-354-teeth-sku-17137800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 945mm 315 teeth SKU: 17137500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-945mm-315-teeth-sku-17137500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 882mm 294 teeth SKU: 17137300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-882mm-294-teeth-sku-17137300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 711mm 237 teeth SKU: 17137000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-711mm-237-teeth-sku-17137000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 669mm 223 teeth SKU: 17136700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-669mm-223-teeth-sku-17136700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 633mm 211 teeth SKU: 17136400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-633mm-211-teeth-sku-17136400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 606mm 202 teeth SKU: 17136200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-606mm-202-teeth-sku-17136200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 597mm 199 teeth SKU: 17136100](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-597mm-199-teeth-sku-17136100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 564mm 188 teeth SKU: 17135900](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-564mm-188-teeth-sku-17135900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 537mm 179 teeth SKU: 17135700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-537mm-179-teeth-sku-17135700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 531mm 177 teeth SKU: 17135600](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-531mm-177-teeth-sku-17135600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 513mm 171 teeth SKU: 17135400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-513mm-171-teeth-sku-17135400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 501mm 167 teeth SKU: 17135200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-501mm-167-teeth-sku-17135200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 486mm 162 teeth SKU: 17135000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-486mm-162-teeth-sku-17135000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 474mm 158 teeth SKU: 17134900](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-474mm-158-teeth-sku-17134900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 447mm 149 teeth SKU: 17134700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-447mm-149-teeth-sku-17134700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 420mm 140 teeth SKU: 17134500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-420mm-140-teeth-sku-17134500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 390mm 130 teeth SKU: 17134300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-390mm-130-teeth-sku-17134300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 384mm 128 teeth SKU: 17134200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-384mm-128-teeth-sku-17134200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 363mm 121 teeth SKU: 17134000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-363mm-121-teeth-sku-17134000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 339mm 113 teeth SKU: 17133800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-339mm-113-teeth-sku-17133800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 336mm 112 teeth SKU: 17133700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-336mm-112-teeth-sku-17133700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 318mm 106 teeth SKU: 17133500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-318mm-106-teeth-sku-17133500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 312mm 104 teeth SKU: 17133400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-312mm-104-teeth-sku-17133400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 300mm 100 teeth SKU: 17133300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-300mm-100-teeth-sku-17133300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 285mm 95 teeth SKU: 17133200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-285mm-95-teeth-sku-17133200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 267mm 89 teeth SKU: 17133000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-267mm-89-teeth-sku-17133000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 255mm 85 teeth SKU: 17132800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-255mm-85-teeth-sku-17132800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 252mm 84 teeth SKU: 17132700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-252mm-84-teeth-sku-17132700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 225mm 75 teeth SKU: 17132400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-225mm-75-teeth-sku-17132400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 216mm 72 teeth SKU: 17132200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-216mm-72-teeth-sku-17132200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 213mm 71 teeth SKU: 17132100](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-213mm-71-teeth-sku-17132100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 210mm 70 teeth SKU: 17132000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-210mm-70-teeth-sku-17132000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 201mm 67 teeth SKU: 17131800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-201mm-67-teeth-sku-17131800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 177mm 59 teeth SKU: 17131600](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-177mm-59-teeth-sku-17131600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 168mm 56 teeth SKU: 17131400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-168mm-56-teeth-sku-17131400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 159mm 53 teeth SKU: 17131200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-159mm-53-teeth-sku-17131200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 150mm 50 teeth SKU: 17131000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-150mm-50-teeth-sku-17131000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 144mm 48 teeth SKU: 17130800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-144mm-48-teeth-sku-17130800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 111mm 37 teeth SKU: 17130500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-111mm-37-teeth-sku-17130500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm 3M-15 open length SKU: 17130000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-3m-15-open-length-sku-17130000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 3M belt width 9mm SKU: 17119900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-3m-belt-width-9mm-sku-17119900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 3M width 9mm Lw 1569mm 523 teeth SKU: 17119200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1569mm-523-teeth-sku-17119200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1530mm 510 teeth SKU: 17119000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1530mm-510-teeth-sku-17119000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1500mm 500 teeth SKU: 17118800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1500mm-500-teeth-sku-17118800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1263mm 421 teeth SKU: 17118400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1263mm-421-teeth-sku-17118400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1125mm 375 teeth SKU: 17118000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1125mm-375-teeth-sku-17118000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 1062mm 354 teeth SKU: 17117800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-1062mm-354-teeth-sku-17117800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 945mm 315 teeth SKU: 17117500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-945mm-315-teeth-sku-17117500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 882mm 294 teeth SKU: 17117300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-882mm-294-teeth-sku-17117300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 711mm 237 teeth SKU: 17117000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-711mm-237-teeth-sku-17117000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 669mm 223 teeth SKU: 17116700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-669mm-223-teeth-sku-17116700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 633mm 211 teeth SKU: 17116400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-633mm-211-teeth-sku-17116400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 606mm 202 teeth SKU: 17116200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-606mm-202-teeth-sku-17116200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 597mm 199 teeth SKU: 17116100](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-597mm-199-teeth-sku-17116100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 564mm 188 teeth SKU: 17115900](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-564mm-188-teeth-sku-17115900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 537mm 179 teeth SKU: 17115700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-537mm-179-teeth-sku-17115700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 531mm 177 teeth SKU: 17115600](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-531mm-177-teeth-sku-17115600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 513mm 171 teeth SKU: 17115400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-513mm-171-teeth-sku-17115400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 501mm 167 teeth SKU: 17115200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-501mm-167-teeth-sku-17115200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 486mm 162 teeth SKU: 17115000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-486mm-162-teeth-sku-17115000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 474mm 158 teeth SKU: 17114900](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-474mm-158-teeth-sku-17114900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 447mm 149 teeth SKU: 17114700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-447mm-149-teeth-sku-17114700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 420mm 140 teeth SKU: 17114500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-420mm-140-teeth-sku-17114500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 390mm 130 teeth SKU: 17114300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-390mm-130-teeth-sku-17114300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 384mm 128 teeth SKU: 17114200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-384mm-128-teeth-sku-17114200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 363mm 121 teeth SKU: 17114000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-363mm-121-teeth-sku-17114000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 339mm 113 teeth SKU: 17113800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-339mm-113-teeth-sku-17113800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 336mm 112 teeth SKU: 17113700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-336mm-112-teeth-sku-17113700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 318mm 106 teeth SKU: 17113500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-318mm-106-teeth-sku-17113500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 312mm 104 teeth SKU: 17113400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-312mm-104-teeth-sku-17113400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 300mm 100 teeth SKU: 17113300](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-300mm-100-teeth-sku-17113300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 285mm 95 teeth SKU: 17113200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-285mm-95-teeth-sku-17113200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 267mm 89 teeth SKU: 17113000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-267mm-89-teeth-sku-17113000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 255mm 85 teeth SKU: 17112800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-255mm-85-teeth-sku-17112800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 252mm 84 teeth SKU: 17112700](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-252mm-84-teeth-sku-17112700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 225mm 75 teeth SKU: 17112400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-225mm-75-teeth-sku-17112400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 216mm 72 teeth SKU: 17112200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-216mm-72-teeth-sku-17112200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 213mm 71 teeth SKU: 17112100](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-213mm-71-teeth-sku-17112100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 210mm 70 teeth SKU: 17112000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-210mm-70-teeth-sku-17112000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 201mm 67 teeth SKU: 17111800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-201mm-67-teeth-sku-17111800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 177mm 59 teeth SKU: 17111600](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-177mm-59-teeth-sku-17111600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 168mm 56 teeth SKU: 17111400](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-168mm-56-teeth-sku-17111400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 159mm 53 teeth SKU: 17111200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-159mm-53-teeth-sku-17111200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 150mm 50 teeth SKU: 17111000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-150mm-50-teeth-sku-17111000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 144mm 48 teeth SKU: 17110800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-144mm-48-teeth-sku-17110800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm Lw 111mm 37 teeth SKU: 17110500](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-lw-111mm-37-teeth-sku-17110500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 9mm 3M-09 open length SKU: 17110000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-9mm-3m-09-open-length-sku-17110000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [timing bar HTD 3M 112 teeth length 200mm material aluminium SKU: 17099200](https://maedler.in/product/timing-bar-htd-3m-112-teeth-length-200mm-material-aluminium-sku-17099200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 96 teeth length 200mm material aluminium SKU: 17099100](https://maedler.in/product/timing-bar-htd-3m-96-teeth-length-200mm-material-aluminium-sku-17099100/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 90 teeth length 200mm material aluminium SKU: 17099000](https://maedler.in/product/timing-bar-htd-3m-90-teeth-length-200mm-material-aluminium-sku-17099000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 80 teeth length 200mm material aluminium SKU: 17098000](https://maedler.in/product/timing-bar-htd-3m-80-teeth-length-200mm-material-aluminium-sku-17098000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 72 teeth length 200mm material aluminium SKU: 17097200](https://maedler.in/product/timing-bar-htd-3m-72-teeth-length-200mm-material-aluminium-sku-17097200/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 70 teeth length 200mm material aluminium SKU: 17097000](https://maedler.in/product/timing-bar-htd-3m-70-teeth-length-200mm-material-aluminium-sku-17097000/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 68 teeth length 200mm material aluminium SKU: 17096800](https://maedler.in/product/timing-bar-htd-3m-68-teeth-length-200mm-material-aluminium-sku-17096800/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 66 teeth length 200mm material aluminium SKU: 17096600](https://maedler.in/product/timing-bar-htd-3m-66-teeth-length-200mm-material-aluminium-sku-17096600/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 64 teeth length 200mm material aluminium SKU: 17096400](https://maedler.in/product/timing-bar-htd-3m-64-teeth-length-200mm-material-aluminium-sku-17096400/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 3M 62 teeth length 200mm material aluminium SKU: 17096200](https://maedler.in/product/timing-bar-htd-3m-62-teeth-length-200mm-material-aluminium-sku-17096200/): Material: Aluminium similar EN AW2017A. - [High performance V-belt XPA EPDM datum length 1607 mm SKU: 15291607](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1607-mm-sku-15291607/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1600 mm SKU: 15291600](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1600-mm-sku-15291600/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1582 mm SKU: 15291582](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1582-mm-sku-15291582/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1557 mm SKU: 15291557](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1557-mm-sku-15291557/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1550 mm SKU: 15291550](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1550-mm-sku-15291550/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1532 mm SKU: 15291532](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1532-mm-sku-15291532/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1507 mm SKU: 15291507](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1507-mm-sku-15291507/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1500 mm SKU: 15291500](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1500-mm-sku-15291500/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1482 mm SKU: 15291482](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1482-mm-sku-15291482/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1457 mm SKU: 15291457](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1457-mm-sku-15291457/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1450 mm SKU: 15291450](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1450-mm-sku-15291450/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1442 mm SKU: 15291442](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1442-mm-sku-15291442/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1432 mm SKU: 15291432](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1432-mm-sku-15291432/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1407 mm SKU: 15291407](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1407-mm-sku-15291407/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1400 mm SKU: 15291400](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1400-mm-sku-15291400/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1382 mm SKU: 15291382](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1382-mm-sku-15291382/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1360 mm SKU: 15291360](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1360-mm-sku-15291360/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1357 mm SKU: 15291357](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1357-mm-sku-15291357/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1332 mm SKU: 15291332](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1332-mm-sku-15291332/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1320 mm SKU: 15291320](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1320-mm-sku-15291320/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1307 mm SKU: 15291307](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1307-mm-sku-15291307/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1282 mm SKU: 15291282](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1282-mm-sku-15291282/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1272 mm SKU: 15291272](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1272-mm-sku-15291272/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1257 mm SKU: 15291257](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1257-mm-sku-15291257/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1250 mm SKU: 15291250](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1250-mm-sku-15291250/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1232 mm SKU: 15291232](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1232-mm-sku-15291232/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1220 mm SKU: 15291220](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1220-mm-sku-15291220/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1207 mm SKU: 15291207](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1207-mm-sku-15291207/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1200 mm SKU: 15291200](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1200-mm-sku-15291200/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1180 mm SKU: 15291180](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1180-mm-sku-15291180/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1157 mm SKU: 15291157](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1157-mm-sku-15291157/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1150 mm SKU: 15291150](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1150-mm-sku-15291150/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1142 mm SKU: 15291142](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1142-mm-sku-15291142/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1140 mm SKU: 15291140](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1140-mm-sku-15291140/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1132 mm SKU: 15291132](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1132-mm-sku-15291132/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1120 mm SKU: 15291120](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1120-mm-sku-15291120/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1107 mm SKU: 15291107](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1107-mm-sku-15291107/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1090 mm SKU: 15291090](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1090-mm-sku-15291090/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1082 mm SKU: 15291082](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1082-mm-sku-15291082/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1060 mm SKU: 15291060](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1060-mm-sku-15291060/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1030 mm SKU: 15291030](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1030-mm-sku-15291030/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1007 mm SKU: 15291007](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1007-mm-sku-15291007/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1000 mm SKU: 15291000](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1000-mm-sku-15291000/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 982 mm SKU: 15290982](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-982-mm-sku-15290982/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 975 mm SKU: 15290975](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-975-mm-sku-15290975/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 962 mm SKU: 15290962](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-962-mm-sku-15290962/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 957 mm SKU: 15290957](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-957-mm-sku-15290957/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 950 mm SKU: 15290950](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-950-mm-sku-15290950/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 932 mm SKU: 15290932](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-932-mm-sku-15290932/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 925 mm SKU: 15290925](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-925-mm-sku-15290925/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 907 mm SKU: 15290907](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-907-mm-sku-15290907/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 900 mm SKU: 15290900](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-900-mm-sku-15290900/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 882 mm SKU: 15290882](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-882-mm-sku-15290882/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 875 mm SKU: 15290875](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-875-mm-sku-15290875/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 857 mm SKU: 15290857](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-857-mm-sku-15290857/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 850 mm SKU: 15290850](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-850-mm-sku-15290850/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 832 mm SKU: 15290832](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-832-mm-sku-15290832/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 825 mm SKU: 15290825](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-825-mm-sku-15290825/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 807 mm SKU: 15290807](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-807-mm-sku-15290807/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 800 mm SKU: 15290800](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-800-mm-sku-15290800/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 782 mm SKU: 15290782](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-782-mm-sku-15290782/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 760 mm SKU: 15290760](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-760-mm-sku-15290760/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 757 mm SKU: 15290757](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-757-mm-sku-15290757/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 732 mm SKU: 15290732](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-732-mm-sku-15290732/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 710 mm SKU: 15290710](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-710-mm-sku-15290710/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 707 mm SKU: 15290707](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-707-mm-sku-15290707/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 700 mm SKU: 15290700](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-700-mm-sku-15290700/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 682 mm SKU: 15290682](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-682-mm-sku-15290682/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 660 mm SKU: 15290660](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-660-mm-sku-15290660/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 630 mm SKU: 15290630](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-630-mm-sku-15290630/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [V-belt profile SPA LR 3750mm SKU: 15289500](https://maedler.in/product/v-belt-profile-spa-lr-3750mm-sku-15289500/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 3550mm SKU: 15289300](https://maedler.in/product/v-belt-profile-spa-lr-3550mm-sku-15289300/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 3350mm SKU: 15289100](https://maedler.in/product/v-belt-profile-spa-lr-3350mm-sku-15289100/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 3150mm SKU: 15288800](https://maedler.in/product/v-belt-profile-spa-lr-3150mm-sku-15288800/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 3000mm SKU: 15288600](https://maedler.in/product/v-belt-profile-spa-lr-3000mm-sku-15288600/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 2800mm SKU: 15288300](https://maedler.in/product/v-belt-profile-spa-lr-2800mm-sku-15288300/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 2650mm SKU: 15288100](https://maedler.in/product/v-belt-profile-spa-lr-2650mm-sku-15288100/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 2500mm SKU: 15287900](https://maedler.in/product/v-belt-profile-spa-lr-2500mm-sku-15287900/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 2360mm SKU: 15287700](https://maedler.in/product/v-belt-profile-spa-lr-2360mm-sku-15287700/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 2240mm SKU: 15287500](https://maedler.in/product/v-belt-profile-spa-lr-2240mm-sku-15287500/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 2120mm SKU: 15287400](https://maedler.in/product/v-belt-profile-spa-lr-2120mm-sku-15287400/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 2000mm SKU: 15287200](https://maedler.in/product/v-belt-profile-spa-lr-2000mm-sku-15287200/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1900mm SKU: 15286900](https://maedler.in/product/v-belt-profile-spa-lr-1900mm-sku-15286900/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1800mm SKU: 15286600](https://maedler.in/product/v-belt-profile-spa-lr-1800mm-sku-15286600/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1700mm SKU: 15286300](https://maedler.in/product/v-belt-profile-spa-lr-1700mm-sku-15286300/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1600mm SKU: 15286000](https://maedler.in/product/v-belt-profile-spa-lr-1600mm-sku-15286000/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1500mm SKU: 15285700](https://maedler.in/product/v-belt-profile-spa-lr-1500mm-sku-15285700/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1482mm SKU: 15285600](https://maedler.in/product/v-belt-profile-spa-lr-1482mm-sku-15285600/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1400mm SKU: 15285400](https://maedler.in/product/v-belt-profile-spa-lr-1400mm-sku-15285400/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1320mm SKU: 15285100](https://maedler.in/product/v-belt-profile-spa-lr-1320mm-sku-15285100/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1250mm SKU: 15284900](https://maedler.in/product/v-belt-profile-spa-lr-1250mm-sku-15284900/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1232mm SKU: 15284800](https://maedler.in/product/v-belt-profile-spa-lr-1232mm-sku-15284800/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1180mm SKU: 15284500](https://maedler.in/product/v-belt-profile-spa-lr-1180mm-sku-15284500/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1157mm SKU: 15284400](https://maedler.in/product/v-belt-profile-spa-lr-1157mm-sku-15284400/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1120mm SKU: 15284300](https://maedler.in/product/v-belt-profile-spa-lr-1120mm-sku-15284300/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1060mm SKU: 15284000](https://maedler.in/product/v-belt-profile-spa-lr-1060mm-sku-15284000/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 1000mm SKU: 15283800](https://maedler.in/product/v-belt-profile-spa-lr-1000mm-sku-15283800/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 950mm SKU: 15283600](https://maedler.in/product/v-belt-profile-spa-lr-950mm-sku-15283600/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 900mm SKU: 15283400](https://maedler.in/product/v-belt-profile-spa-lr-900mm-sku-15283400/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile SPA LR 850mm SKU: 15283000](https://maedler.in/product/v-belt-profile-spa-lr-850mm-sku-15283000/): Material: Neopren with glass-fibre tensile member. Width b = 12.7 mm. Height h = 10 mm. Width u = 5.8 mm. Smallest medium pulley diameter = 90 mm. Weight per Metre 0.123 kg. Conversion Outside (LA) and Reference Length (LR): LA = LR + 18 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [Timing belt pulley HTD-5M 52 teeth for belt width 25mm for taper-bush 1210 SKU: 17277452](https://maedler.in/product/timing-belt-pulley-htd-5m-52-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277452/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 48 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277448](https://maedler.in/product/timing-belt-pulley-htd-5m-48-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277448/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 44 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277444](https://maedler.in/product/timing-belt-pulley-htd-5m-44-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277444/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 40 teeth, for belt width 25mm, for taper-bush 1108 SKU: 17277440](https://maedler.in/product/timing-belt-pulley-htd-5m-40-teeth-for-belt-width-25mm-for-taper-bush-1108-sku-17277440/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 38 teeth, for belt width 25mm, for taper-bush 1108 SKU: 17277438](https://maedler.in/product/timing-belt-pulley-htd-5m-38-teeth-for-belt-width-25mm-for-taper-bush-1108-sku-17277438/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 36 teeth, for belt width 25mm, for taper-bush 1108 SKU: 17277436](https://maedler.in/product/timing-belt-pulley-htd-5m-36-teeth-for-belt-width-25mm-for-taper-bush-1108-sku-17277436/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 34 teeth, for belt width 25mm, for taper-bush 1008 SKU: 17277434](https://maedler.in/product/timing-belt-pulley-htd-5m-34-teeth-for-belt-width-25mm-for-taper-bush-1008-sku-17277434/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 112 teeth, for belt width 15mm, for taper-bush 2012 SKU: 17277394](https://maedler.in/product/timing-belt-pulley-htd-5m-112-teeth-for-belt-width-15mm-for-taper-bush-2012-sku-17277394/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 90 teeth, for belt width 15mm, for taper-bush 1610 SKU: 17277390](https://maedler.in/product/timing-belt-pulley-htd-5m-90-teeth-for-belt-width-15mm-for-taper-bush-1610-sku-17277390/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 80 teeth, for belt width 15mm, for taper-bush 1610 SKU: 17277380](https://maedler.in/product/timing-belt-pulley-htd-5m-80-teeth-for-belt-width-15mm-for-taper-bush-1610-sku-17277380/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 72 teeth, for belt width 15mm, for taper-bush 1610 SKU: 17277372](https://maedler.in/product/timing-belt-pulley-htd-5m-72-teeth-for-belt-width-15mm-for-taper-bush-1610-sku-17277372/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 64 teeth, for belt width 15mm, for taper-bush 1210 SKU: 17277364](https://maedler.in/product/timing-belt-pulley-htd-5m-64-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277364/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 60 teeth, for belt width 15mm, for taper-bush 1210 SKU: 17277360](https://maedler.in/product/timing-belt-pulley-htd-5m-60-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277360/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 56 teeth, for belt width 15mm, for taper-bush 1210 SKU: 17277356](https://maedler.in/product/timing-belt-pulley-htd-5m-56-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277356/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD-5M 52 teeth for belt width 15mm for taper-bush 1210 SKU: 17277352](https://maedler.in/product/timing-belt-pulley-htd-5m-52-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277352/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 48 teeth, for belt width 15mm, for taper-bush 1210 SKU: 17277348](https://maedler.in/product/timing-belt-pulley-htd-5m-48-teeth-for-belt-width-15mm-for-taper-bush-1210-sku-17277348/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 44 teeth, for belt width 15mm, for taper-bush 1108 SKU: 17277344](https://maedler.in/product/timing-belt-pulley-htd-5m-44-teeth-for-belt-width-15mm-for-taper-bush-1108-sku-17277344/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 40 teeth, for belt width 15mm, for taper-bush 1108 SKU: 17277340](https://maedler.in/product/timing-belt-pulley-htd-5m-40-teeth-for-belt-width-15mm-for-taper-bush-1108-sku-17277340/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 38 teeth, for belt width 15mm, for taper-bush 1108 SKU: 17277338](https://maedler.in/product/timing-belt-pulley-htd-5m-38-teeth-for-belt-width-15mm-for-taper-bush-1108-sku-17277338/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 36 teeth, for belt width 15mm, for taper-bush 1108 SKU: 17277336](https://maedler.in/product/timing-belt-pulley-htd-5m-36-teeth-for-belt-width-15mm-for-taper-bush-1108-sku-17277336/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 34 teeth, for belt width 15mm, for taper-bush 1008 SKU: 17277334](https://maedler.in/product/timing-belt-pulley-htd-5m-34-teeth-for-belt-width-15mm-for-taper-bush-1008-sku-17277334/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 5M material aluminium 90 teeth for belt width 25 mm SKU: 17249000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-90-teeth-for-belt-width-25-mm-sku-17249000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 80 teeth for belt width 25 mm SKU: 17248000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-80-teeth-for-belt-width-25-mm-sku-17248000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 72 teeth for belt width 25mm SKU: 17247200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-72-teeth-for-belt-width-25mm-sku-17247200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 60 teeth for belt width 25mm SKU: 17246000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-60-teeth-for-belt-width-25mm-sku-17246000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 52 teeth for belt width 25 mm SKU: 17245200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-52-teeth-for-belt-width-25-mm-sku-17245200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 48 teeth for belt width 25mm SKU: 17244800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-48-teeth-for-belt-width-25mm-sku-17244800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 44 teeth for belt width 25mm SKU: 17244400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-44-teeth-for-belt-width-25mm-sku-17244400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 40 teeth for belt width 25mm SKU: 17244000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-40-teeth-for-belt-width-25mm-sku-17244000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 36 teeth for belt width 25mm SKU: 17243600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-36-teeth-for-belt-width-25mm-sku-17243600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 34 teeth for belt width 25 mm SKU: 17243400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-34-teeth-for-belt-width-25-mm-sku-17243400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 32 teeth for belt width 25mm SKU: 17243200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-32-teeth-for-belt-width-25mm-sku-17243200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 30 teeth for belt width 25mm SKU: 17243000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-30-teeth-for-belt-width-25mm-sku-17243000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 28 teeth for belt width 25mm SKU: 17242800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-28-teeth-for-belt-width-25mm-sku-17242800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 26 teeth for belt width 25mm SKU: 17242600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-26-teeth-for-belt-width-25mm-sku-17242600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 25 teeth for belt width 25 mm SKU: 17242500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-25-teeth-for-belt-width-25-mm-sku-17242500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 24 teeth for belt width 25mm SKU: 17242400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-24-teeth-for-belt-width-25mm-sku-17242400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 22 teeth for belt width 25mm SKU: 17242200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-22-teeth-for-belt-width-25mm-sku-17242200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 21 teeth for belt width 25mm SKU: 17242100](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-21-teeth-for-belt-width-25mm-sku-17242100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 20 teeth for belt width 25mm SKU: 17242000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-20-teeth-for-belt-width-25mm-sku-17242000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 18 teeth for belt width 25mm SKU: 17241800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-18-teeth-for-belt-width-25mm-sku-17241800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 17 teeth for belt width 25 mm SKU: 17241700](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-17-teeth-for-belt-width-25-mm-sku-17241700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 16 teeth for belt width 25mm SKU: 17241600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-16-teeth-for-belt-width-25mm-sku-17241600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 15 teeth for belt width 25mm SKU: 17241500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-15-teeth-for-belt-width-25mm-sku-17241500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 14 teeth for belt width 25mm SKU: 17241400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-14-teeth-for-belt-width-25mm-sku-17241400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 12 teeth for belt width 25mm SKU: 17241200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-12-teeth-for-belt-width-25mm-sku-17241200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 90 teeth for belt width 15 mm SKU: 17239000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-90-teeth-for-belt-width-15-mm-sku-17239000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 80 teeth for belt width 15 mm SKU: 17238000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-80-teeth-for-belt-width-15-mm-sku-17238000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 72 teeth for belt width 15mm SKU: 17237200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-72-teeth-for-belt-width-15mm-sku-17237200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 60 teeth for belt width 15mm SKU: 17236000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-60-teeth-for-belt-width-15mm-sku-17236000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 52 teeth for belt width 15 mm SKU: 17235200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-52-teeth-for-belt-width-15-mm-sku-17235200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 48 teeth for belt width 15mm SKU: 17234800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-48-teeth-for-belt-width-15mm-sku-17234800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 44 teeth for belt width 15mm SKU: 17234400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-44-teeth-for-belt-width-15mm-sku-17234400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 40 teeth for belt width 15mm SKU: 17234000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-40-teeth-for-belt-width-15mm-sku-17234000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 36 teeth for belt width 15mm SKU: 17233600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-36-teeth-for-belt-width-15mm-sku-17233600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 34 teeth for belt width 15 mm SKU: 17233400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-34-teeth-for-belt-width-15-mm-sku-17233400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 32 teeth for belt width 15mm SKU: 17233200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-32-teeth-for-belt-width-15mm-sku-17233200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 30 teeth for belt width 15mm SKU: 17233000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-30-teeth-for-belt-width-15mm-sku-17233000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 28 teeth for belt width 15mm SKU: 17232800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-28-teeth-for-belt-width-15mm-sku-17232800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 26 teeth for belt width 15mm SKU: 17232600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-26-teeth-for-belt-width-15mm-sku-17232600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 25 teeth for belt width 15 mm SKU: 17232500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-25-teeth-for-belt-width-15-mm-sku-17232500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 24 teeth for belt width 15mm SKU: 17232400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-24-teeth-for-belt-width-15mm-sku-17232400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 22 teeth for belt width 15mm SKU: 17232200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-22-teeth-for-belt-width-15mm-sku-17232200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 21 teeth for belt width 15mm SKU: 17232100](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-21-teeth-for-belt-width-15mm-sku-17232100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 20 teeth for belt width 15mm SKU: 17232000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-20-teeth-for-belt-width-15mm-sku-17232000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 18 teeth for belt width 15mm SKU: 17231800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-18-teeth-for-belt-width-15mm-sku-17231800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 17 teeth for belt width 15 mm SKU: 17231700](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-17-teeth-for-belt-width-15-mm-sku-17231700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 16 teeth for belt width 15mm SKU: 17231600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-16-teeth-for-belt-width-15mm-sku-17231600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 15 teeth for belt width 15mm SKU: 17231500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-15-teeth-for-belt-width-15mm-sku-17231500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 14 teeth for belt width 15mm SKU: 17231400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-14-teeth-for-belt-width-15mm-sku-17231400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 12 teeth for belt width 15mm SKU: 17231200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-12-teeth-for-belt-width-15mm-sku-17231200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 90 teeth for belt width 9 mm SKU: 17229000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-90-teeth-for-belt-width-9-mm-sku-17229000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 80 teeth for belt width 9 mm SKU: 17228000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-80-teeth-for-belt-width-9-mm-sku-17228000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 72 teeth for belt width 9mm SKU: 17227200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-72-teeth-for-belt-width-9mm-sku-17227200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 60 teeth for belt width 9mm SKU: 17226000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-60-teeth-for-belt-width-9mm-sku-17226000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 52 teeth for belt width 9 mm SKU: 17225200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-52-teeth-for-belt-width-9-mm-sku-17225200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 48 teeth for belt width 9mm SKU: 17224800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-48-teeth-for-belt-width-9mm-sku-17224800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material aluminium 44 teeth for belt width 9mm SKU: 17224400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-aluminium-44-teeth-for-belt-width-9mm-sku-17224400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 40 teeth for belt width 9mm SKU: 17224000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-40-teeth-for-belt-width-9mm-sku-17224000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 36 teeth for belt width 9mm SKU: 17223600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-36-teeth-for-belt-width-9mm-sku-17223600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 34 teeth for belt width 9 mm SKU: 17223400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-34-teeth-for-belt-width-9-mm-sku-17223400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 32 teeth for belt width 9mm SKU: 17223200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-32-teeth-for-belt-width-9mm-sku-17223200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 30 teeth for belt width 9mm SKU: 17223000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-30-teeth-for-belt-width-9mm-sku-17223000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 28 teeth for belt width 9mm SKU: 17222800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-28-teeth-for-belt-width-9mm-sku-17222800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 26 teeth for belt width 9mm SKU: 17222600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-26-teeth-for-belt-width-9mm-sku-17222600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 25 teeth for belt width 9 mm SKU: 17222500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-25-teeth-for-belt-width-9-mm-sku-17222500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 24 teeth for belt width 9mm SKU: 17222400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-24-teeth-for-belt-width-9mm-sku-17222400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 22 teeth for belt width 9mm SKU: 17222200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-22-teeth-for-belt-width-9mm-sku-17222200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 21 teeth for belt width 9mm SKU: 17222100](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-21-teeth-for-belt-width-9mm-sku-17222100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 20 teeth for belt width 9mm SKU: 17222000](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-20-teeth-for-belt-width-9mm-sku-17222000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 18 teeth for belt width 9mm SKU: 17221800](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-18-teeth-for-belt-width-9mm-sku-17221800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 17 teeth for belt width 9 mm SKU: 17221700](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-17-teeth-for-belt-width-9-mm-sku-17221700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 16 teeth for belt width 9mm SKU: 17221600](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-16-teeth-for-belt-width-9mm-sku-17221600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 15 teeth for belt width 9mm SKU: 17221500](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-15-teeth-for-belt-width-9mm-sku-17221500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 14 teeth for belt width 9mm SKU: 17221400](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-14-teeth-for-belt-width-9mm-sku-17221400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 5M material steel 12 teeth for belt width 9mm SKU: 17221200](https://maedler.in/product/timing-belt-pulley-htd-5m-material-steel-12-teeth-for-belt-width-9mm-sku-17221200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 aluminium similar EN AW2017A. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Fixing plate for timing belts material aluminium HTD 3M belt width 15mm SKU: 17139900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-3m-belt-width-15mm-sku-17139900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 3M width 15mm Lw 1569mm 523 teeth SKU: 17139200](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1569mm-523-teeth-sku-17139200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 1530mm 510 teeth SKU: 17139000](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1530mm-510-teeth-sku-17139000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 3M width 15mm Lw 1500mm 500 teeth SKU: 17138800](https://maedler.in/product/neoprene-timing-belt-htd-3m-width-15mm-lw-1500mm-500-teeth-sku-17138800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [High performance V-belt XPB EPDM datum length 1260 mm SKU: 15491260](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1260-mm-sku-15491260/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1250 mm SKU: 15491250](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1250-mm-sku-15491250/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1150 mm SKU: 15491150](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1150-mm-sku-15491150/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 950 mm SKU: 15490950](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-950-mm-sku-15490950/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [V-belt profile B (17) LR 3590mm inner length 3550mm SKU: 15469700](https://maedler.in/product/v-belt-profile-b-17-lr-3590mm-inner-length-3550mm-sku-15469700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 3190mm inner length 3150mm SKU: 15469600](https://maedler.in/product/v-belt-profile-b-17-lr-3190mm-inner-length-3150mm-sku-15469600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 3040mm inner length 3000mm SKU: 15469500](https://maedler.in/product/v-belt-profile-b-17-lr-3040mm-inner-length-3000mm-sku-15469500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2690mm inner length 2650mm SKU: 15469400](https://maedler.in/product/v-belt-profile-b-17-lr-2690mm-inner-length-2650mm-sku-15469400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2580mm inner length 2540mm SKU: 15469200](https://maedler.in/product/v-belt-profile-b-17-lr-2580mm-inner-length-2540mm-sku-15469200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2540mm inner length 2500mm SKU: 15469100](https://maedler.in/product/v-belt-profile-b-17-lr-2540mm-inner-length-2500mm-sku-15469100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2490mm inner length 2450mm SKU: 15468900](https://maedler.in/product/v-belt-profile-b-17-lr-2490mm-inner-length-2450mm-sku-15468900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2400mm inner length 2360mm SKU: 15468600](https://maedler.in/product/v-belt-profile-b-17-lr-2400mm-inner-length-2360mm-sku-15468600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2280mm inner length 2240mm SKU: 15468200](https://maedler.in/product/v-belt-profile-b-17-lr-2280mm-inner-length-2240mm-sku-15468200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2240mm inner length 2200mm SKU: 15468100](https://maedler.in/product/v-belt-profile-b-17-lr-2240mm-inner-length-2200mm-sku-15468100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2160mm inner length 2120mm SKU: 15467900](https://maedler.in/product/v-belt-profile-b-17-lr-2160mm-inner-length-2120mm-sku-15467900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2100mm inner length 2060mm SKU: 15467600](https://maedler.in/product/v-belt-profile-b-17-lr-2100mm-inner-length-2060mm-sku-15467600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 2040mm inner length 2000mm SKU: 15467300](https://maedler.in/product/v-belt-profile-b-17-lr-2040mm-inner-length-2000mm-sku-15467300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1940mm inner length 1900mm SKU: 15466800](https://maedler.in/product/v-belt-profile-b-17-lr-1940mm-inner-length-1900mm-sku-15466800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1840mm inner length 1800mm SKU: 15466300](https://maedler.in/product/v-belt-profile-b-17-lr-1840mm-inner-length-1800mm-sku-15466300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1740mm inner length 1700mm SKU: 15465800](https://maedler.in/product/v-belt-profile-b-17-lr-1740mm-inner-length-1700mm-sku-15465800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1716mm inner length 1676mm SKU: 15465700](https://maedler.in/product/v-belt-profile-b-17-lr-1716mm-inner-length-1676mm-sku-15465700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1690mm inner length 1650mm SKU: 15465600](https://maedler.in/product/v-belt-profile-b-17-lr-1690mm-inner-length-1650mm-sku-15465600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1665mm inner length 1625mm SKU: 15465500](https://maedler.in/product/v-belt-profile-b-17-lr-1665mm-inner-length-1625mm-sku-15465500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1640mm inner length 1600mm SKU: 15465400](https://maedler.in/product/v-belt-profile-b-17-lr-1640mm-inner-length-1600mm-sku-15465400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1615mm inner length 1575mm SKU: 15465300](https://maedler.in/product/v-belt-profile-b-17-lr-1615mm-inner-length-1575mm-sku-15465300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1590mm inner length 1550mm SKU: 15465200](https://maedler.in/product/v-belt-profile-b-17-lr-1590mm-inner-length-1550mm-sku-15465200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1565mm inner length 1525mm SKU: 15465100](https://maedler.in/product/v-belt-profile-b-17-lr-1565mm-inner-length-1525mm-sku-15465100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1540mm inner length 1500mm SKU: 15465000](https://maedler.in/product/v-belt-profile-b-17-lr-1540mm-inner-length-1500mm-sku-15465000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1513mm inner length 1473mm SKU: 15464900](https://maedler.in/product/v-belt-profile-b-17-lr-1513mm-inner-length-1473mm-sku-15464900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1490mm inner length 1450mm SKU: 15464800](https://maedler.in/product/v-belt-profile-b-17-lr-1490mm-inner-length-1450mm-sku-15464800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1462mm inner length 1422mm SKU: 15464700](https://maedler.in/product/v-belt-profile-b-17-lr-1462mm-inner-length-1422mm-sku-15464700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1440mm inner length 1400mm SKU: 15464600](https://maedler.in/product/v-belt-profile-b-17-lr-1440mm-inner-length-1400mm-sku-15464600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1412mm inner length 1372mm SKU: 15464400](https://maedler.in/product/v-belt-profile-b-17-lr-1412mm-inner-length-1372mm-sku-15464400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1390mm inner length 1350mm SKU: 15464200](https://maedler.in/product/v-belt-profile-b-17-lr-1390mm-inner-length-1350mm-sku-15464200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1360mm inner length 1320mm SKU: 15464000](https://maedler.in/product/v-belt-profile-b-17-lr-1360mm-inner-length-1320mm-sku-15464000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1340mm inner length 1300mm SKU: 15463900](https://maedler.in/product/v-belt-profile-b-17-lr-1340mm-inner-length-1300mm-sku-15463900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1315mm inner length 1275mm SKU: 15463700](https://maedler.in/product/v-belt-profile-b-17-lr-1315mm-inner-length-1275mm-sku-15463700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1290mm inner length 1250mm SKU: 15463500](https://maedler.in/product/v-belt-profile-b-17-lr-1290mm-inner-length-1250mm-sku-15463500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1265mm inner length 1225mm SKU: 15463400](https://maedler.in/product/v-belt-profile-b-17-lr-1265mm-inner-length-1225mm-sku-15463400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1240mm inner length 1200mm SKU: 15463200](https://maedler.in/product/v-belt-profile-b-17-lr-1240mm-inner-length-1200mm-sku-15463200/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1220mm inner length 1180mm SKU: 15463100](https://maedler.in/product/v-belt-profile-b-17-lr-1220mm-inner-length-1180mm-sku-15463100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1190mm inner length 1150mm SKU: 15463000](https://maedler.in/product/v-belt-profile-b-17-lr-1190mm-inner-length-1150mm-sku-15463000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1160mm inner length 1120mm SKU: 15462900](https://maedler.in/product/v-belt-profile-b-17-lr-1160mm-inner-length-1120mm-sku-15462900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1140mm inner length 1100mm SKU: 15462800](https://maedler.in/product/v-belt-profile-b-17-lr-1140mm-inner-length-1100mm-sku-15462800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1100mm inner length 1060mm SKU: 15462500](https://maedler.in/product/v-belt-profile-b-17-lr-1100mm-inner-length-1060mm-sku-15462500/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1070mm inner length 1030mm SKU: 15462300](https://maedler.in/product/v-belt-profile-b-17-lr-1070mm-inner-length-1030mm-sku-15462300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1040mm inner length 1000mm SKU: 15462100](https://maedler.in/product/v-belt-profile-b-17-lr-1040mm-inner-length-1000mm-sku-15462100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 1015mm inner length 975mm SKU: 15462000](https://maedler.in/product/v-belt-profile-b-17-lr-1015mm-inner-length-975mm-sku-15462000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 990mm inner length 950mm SKU: 15461800](https://maedler.in/product/v-belt-profile-b-17-lr-990mm-inner-length-950mm-sku-15461800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 965mm inner length 925mm SKU: 15461700](https://maedler.in/product/v-belt-profile-b-17-lr-965mm-inner-length-925mm-sku-15461700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 940mm inner length 900mm SKU: 15461600](https://maedler.in/product/v-belt-profile-b-17-lr-940mm-inner-length-900mm-sku-15461600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 890mm inner length 850mm SKU: 15461400](https://maedler.in/product/v-belt-profile-b-17-lr-890mm-inner-length-850mm-sku-15461400/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 876mm inner length 836mm SKU: 15461300](https://maedler.in/product/v-belt-profile-b-17-lr-876mm-inner-length-836mm-sku-15461300/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 840mm inner length 800mm SKU: 15461100](https://maedler.in/product/v-belt-profile-b-17-lr-840mm-inner-length-800mm-sku-15461100/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 815mm inner length 775mm SKU: 15461000](https://maedler.in/product/v-belt-profile-b-17-lr-815mm-inner-length-775mm-sku-15461000/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 790mm inner length 750mm SKU: 15460900](https://maedler.in/product/v-belt-profile-b-17-lr-790mm-inner-length-750mm-sku-15460900/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 750mm inner length 710mm SKU: 15460800](https://maedler.in/product/v-belt-profile-b-17-lr-750mm-inner-length-710mm-sku-15460800/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 710mm inner length 670mm SKU: 15460700](https://maedler.in/product/v-belt-profile-b-17-lr-710mm-inner-length-670mm-sku-15460700/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [V-belt profile B (17) LR 690mm inner length 650mm SKU: 15460600](https://maedler.in/product/v-belt-profile-b-17-lr-690mm-inner-length-650mm-sku-15460600/): Material: Neopren with glass-fibre tensile member. Wedge angle approx. 38°. Width b = 17 mm. Height h = 11 mm. Width u = 9.4 mm. Smallest medium pulley diametre = 125 mm. Weight per Meter 0.180 kg. Inside Length = Reference Length - 40 mm Outside Length = Inside Length + 65 mm Important: During mounting the belt must be pre-tensioned. After running in for 15 - 20 minutes the belt needs to be retightened. At a continuous temperature of over 60° standard V-belts have only a short service life. Oil, Fats and chemicals should be kept away from the drive as they destroy the standard V-belts. Intermediate length are available on request. - [High performance V-belt XPA EPDM datum length 2582 mm SKU: 15292582](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2582-mm-sku-15292582/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2532 mm SKU: 15292532](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2532-mm-sku-15292532/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2500 mm SKU: 15292500](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2500-mm-sku-15292500/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2482 mm SKU: 15292482](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2482-mm-sku-15292482/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2430 mm SKU: 15292430](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2430-mm-sku-15292430/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2410 mm SKU: 15292410](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2410-mm-sku-15292410/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2382 mm SKU: 15292382](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2382-mm-sku-15292382/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2360 mm SKU: 15292360](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2360-mm-sku-15292360/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2332 mm SKU: 15292332](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2332-mm-sku-15292332/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2282 mm SKU: 15292282](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2282-mm-sku-15292282/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2207 mm SKU: 15292207](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2207-mm-sku-15292207/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2180 mm SKU: 15292180](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2180-mm-sku-15292180/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2132 mm SKU: 15292132](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2132-mm-sku-15292132/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2120 mm SKU: 15292120](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2120-mm-sku-15292120/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2082 mm SKU: 15292082](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2082-mm-sku-15292082/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2060 mm SKU: 15292060](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2060-mm-sku-15292060/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2057 mm SKU: 15292057](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2057-mm-sku-15292057/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2032 mm SKU: 15292032](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2032-mm-sku-15292032/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 2000 mm SKU: 15292000](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-2000-mm-sku-15292000/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1982 mm SKU: 15291982](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1982-mm-sku-15291982/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1957 mm SKU: 15291957](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1957-mm-sku-15291957/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1950 mm SKU: 15291950](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1950-mm-sku-15291950/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1932 mm SKU: 15291932](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1932-mm-sku-15291932/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1907 mm SKU: 15291907](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1907-mm-sku-15291907/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1900 mm SKU: 15291900](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1900-mm-sku-15291900/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1882 mm SKU: 15291882](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1882-mm-sku-15291882/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1857 mm SKU: 15291857](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1857-mm-sku-15291857/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1850 mm SKU: 15291850](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1850-mm-sku-15291850/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1832 mm SKU: 15291832](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1832-mm-sku-15291832/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1807 mm SKU: 15291807](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1807-mm-sku-15291807/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1800 mm SKU: 15291800](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1800-mm-sku-15291800/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1782 mm SKU: 15291782](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1782-mm-sku-15291782/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1757 mm SKU: 15291757](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1757-mm-sku-15291757/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1750 mm SKU: 15291750](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1750-mm-sku-15291750/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1732 mm SKU: 15291732](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1732-mm-sku-15291732/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1707 mm SKU: 15291707](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1707-mm-sku-15291707/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1700 mm SKU: 15291700](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1700-mm-sku-15291700/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1682 mm SKU: 15291682](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1682-mm-sku-15291682/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1657 mm SKU: 15291657](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1657-mm-sku-15291657/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1650 mm SKU: 15291650](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1650-mm-sku-15291650/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [High performance V-belt XPA EPDM datum length 1632 mm SKU: 15291632](https://maedler.in/product/high-performance-v-belt-xpa-epdm-datum-length-1632-mm-sku-15291632/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPA are a useful substitute for SPA and 13. Width b = 12.7 mm. Height h = 10 mm. Smallest medium pulley diametre = 71 mm. Weight per Metre 0.105 kg. - [Neoprene timing belt HTD 5M width 9mm Lw 425mm 85 teeth SKU: 17312000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-425mm-85-teeth-sku-17312000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 400mm 80 teeth SKU: 17311800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-400mm-80-teeth-sku-17311800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 375mm 75 teeth SKU: 17311600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-375mm-75-teeth-sku-17311600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 350mm 70 teeth SKU: 17311400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-350mm-70-teeth-sku-17311400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 330mm 66 teeth SKU: 17311200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-330mm-66-teeth-sku-17311200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 10mm 5M-10 open length SKU: 17310000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-10mm-5m-10-open-length-sku-17310000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [timing bar HTD 5M 60 teeth length 200mm material 1.4305 SKU: 17299960](https://maedler.in/product/timing-bar-htd-5m-60-teeth-length-200mm-material-1-4305-sku-17299960/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 48 teeth length 200mm material 1.4305 SKU: 17299948](https://maedler.in/product/timing-bar-htd-5m-48-teeth-length-200mm-material-1-4305-sku-17299948/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 40 teeth length 200mm material 1.4305 SKU: 17299940](https://maedler.in/product/timing-bar-htd-5m-40-teeth-length-200mm-material-1-4305-sku-17299940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 36 teeth length 200mm material 1.4305 SKU: 17299936](https://maedler.in/product/timing-bar-htd-5m-36-teeth-length-200mm-material-1-4305-sku-17299936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 32 teeth length 200mm material 1.4305 SKU: 17299932](https://maedler.in/product/timing-bar-htd-5m-32-teeth-length-200mm-material-1-4305-sku-17299932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 30 teeth length 200mm material 1.4305 SKU: 17299930](https://maedler.in/product/timing-bar-htd-5m-30-teeth-length-200mm-material-1-4305-sku-17299930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 25 teeth length 200mm material 1.4305 SKU: 17299925](https://maedler.in/product/timing-bar-htd-5m-25-teeth-length-200mm-material-1-4305-sku-17299925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 24 teeth length 200mm material 1.4305 SKU: 17299924](https://maedler.in/product/timing-bar-htd-5m-24-teeth-length-200mm-material-1-4305-sku-17299924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 20 teeth length 200mm material 1.4305 SKU: 17299920](https://maedler.in/product/timing-bar-htd-5m-20-teeth-length-200mm-material-1-4305-sku-17299920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 18 teeth length 200mm material 1.4305 SKU: 17299918](https://maedler.in/product/timing-bar-htd-5m-18-teeth-length-200mm-material-1-4305-sku-17299918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 16 teeth toothed length min. 175mm total length 200mm material 1.4305 SKU: 17299916](https://maedler.in/product/timing-bar-htd-5m-16-teeth-toothed-length-min-175mm-total-length-200mm-material-1-4305-sku-17299916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 15 teeth toothed length min. 175mm total length 200mm material 1.4305 SKU: 17299915](https://maedler.in/product/timing-bar-htd-5m-15-teeth-toothed-length-min-175mm-total-length-200mm-material-1-4305-sku-17299915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 5M 12 teeth length 160mm material 1.4305 SKU: 17299912](https://maedler.in/product/timing-bar-htd-5m-12-teeth-length-160mm-material-1-4305-sku-17299912/): Material: Stainless steel 1.4305 (AISI 303). - [Timing bar HTD 5M 112 teeth length 200mm material steel SKU: 17299201](https://maedler.in/product/timing-bar-htd-5m-112-teeth-length-200mm-material-steel-sku-17299201/): Material: Steel. - [Timing bar HTD 5M 112 teeth length 200mm material aluminium SKU: 17299200](https://maedler.in/product/timing-bar-htd-5m-112-teeth-length-200mm-material-aluminium-sku-17299200/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 96 teeth length 200mm material steel SKU: 17299101](https://maedler.in/product/timing-bar-htd-5m-96-teeth-length-200mm-material-steel-sku-17299101/): Material: Steel. - [Timing bar HTD 5M 96 teeth length 200mm material aluminium SKU: 17299100](https://maedler.in/product/timing-bar-htd-5m-96-teeth-length-200mm-material-aluminium-sku-17299100/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 90 teeth length 200mm material steel SKU: 17299001](https://maedler.in/product/timing-bar-htd-5m-90-teeth-length-200mm-material-steel-sku-17299001/): Material: Steel. - [Timing bar HTD 5M 90 teeth length 200mm material aluminium SKU: 17299000](https://maedler.in/product/timing-bar-htd-5m-90-teeth-length-200mm-material-aluminium-sku-17299000/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 80 teeth length 200mm material steel SKU: 17298001](https://maedler.in/product/timing-bar-htd-5m-80-teeth-length-200mm-material-steel-sku-17298001/): Material: Steel. - [Timing bar HTD 5M 80 teeth length 200mm material aluminium SKU: 17298000](https://maedler.in/product/timing-bar-htd-5m-80-teeth-length-200mm-material-aluminium-sku-17298000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 72 teeth length 200mm material steel SKU: 17297201](https://maedler.in/product/timing-bar-htd-5m-72-teeth-length-200mm-material-steel-sku-17297201/): Material: Steel. - [timing bar HTD 5M 72 teeth length 200mm material aluminium SKU: 17297200](https://maedler.in/product/timing-bar-htd-5m-72-teeth-length-200mm-material-aluminium-sku-17297200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 60 teeth length 200mm material steel SKU: 17296001](https://maedler.in/product/timing-bar-htd-5m-60-teeth-length-200mm-material-steel-sku-17296001/): Material: Steel. - [timing bar HTD 5M 60 teeth length 200mm material aluminium SKU: 17296000](https://maedler.in/product/timing-bar-htd-5m-60-teeth-length-200mm-material-aluminium-sku-17296000/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 56 teeth length 200mm material steel SKU: 17295601](https://maedler.in/product/timing-bar-htd-5m-56-teeth-length-200mm-material-steel-sku-17295601/): Material: Steel. - [Timing bar HTD 5M 56 teeth length 200mm material aluminium SKU: 17295600](https://maedler.in/product/timing-bar-htd-5m-56-teeth-length-200mm-material-aluminium-sku-17295600/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 52 teeth length 200mm material steel SKU: 17295201](https://maedler.in/product/timing-bar-htd-5m-52-teeth-length-200mm-material-steel-sku-17295201/): Material: Steel. - [Timing bar HTD 5M 52 teeth length 200mm material aluminium SKU: 17295200](https://maedler.in/product/timing-bar-htd-5m-52-teeth-length-200mm-material-aluminium-sku-17295200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 50 teeth length 200mm material steel SKU: 17295001](https://maedler.in/product/timing-bar-htd-5m-50-teeth-length-200mm-material-steel-sku-17295001/): Material: Steel. - [timing bar HTD 5M 50 teeth length 200mm material aluminium SKU: 17295000](https://maedler.in/product/timing-bar-htd-5m-50-teeth-length-200mm-material-aluminium-sku-17295000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 48 teeth length 200mm material steel SKU: 17294801](https://maedler.in/product/timing-bar-htd-5m-48-teeth-length-200mm-material-steel-sku-17294801/): Material: Steel. - [timing bar HTD 5M 48 teeth length 200mm material aluminium SKU: 17294800](https://maedler.in/product/timing-bar-htd-5m-48-teeth-length-200mm-material-aluminium-sku-17294800/): Material: Aluminium similar to EN AW2017A. - [Timing bar HTD 5M 46 teeth length 200mm material steel SKU: 17294601](https://maedler.in/product/timing-bar-htd-5m-46-teeth-length-200mm-material-steel-sku-17294601/): Material: Steel. - [Timing bar HTD 5M 46 teeth length 200mm material aluminium SKU: 17294600](https://maedler.in/product/timing-bar-htd-5m-46-teeth-length-200mm-material-aluminium-sku-17294600/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 45 teeth length 200mm material steel SKU: 17294501](https://maedler.in/product/timing-bar-htd-5m-45-teeth-length-200mm-material-steel-sku-17294501/): Material: Steel. - [timing bar HTD 5M 45 teeth length 200mm material aluminium SKU: 17294500](https://maedler.in/product/timing-bar-htd-5m-45-teeth-length-200mm-material-aluminium-sku-17294500/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 44 teeth length 200mm material steel SKU: 17294401](https://maedler.in/product/timing-bar-htd-5m-44-teeth-length-200mm-material-steel-sku-17294401/): Material: Steel. - [timing bar HTD 5M 44 teeth length 200mm material aluminium SKU: 17294400](https://maedler.in/product/timing-bar-htd-5m-44-teeth-length-200mm-material-aluminium-sku-17294400/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 42 teeth length 200mm material steel SKU: 17294201](https://maedler.in/product/timing-bar-htd-5m-42-teeth-length-200mm-material-steel-sku-17294201/): Material: Steel. - [timing bar HTD 5M 42 teeth length 200mm material aluminium SKU: 17294200](https://maedler.in/product/timing-bar-htd-5m-42-teeth-length-200mm-material-aluminium-sku-17294200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 40 teeth length 200mm material steel SKU: 17294001](https://maedler.in/product/timing-bar-htd-5m-40-teeth-length-200mm-material-steel-sku-17294001/): Material: Steel. - [timing bar HTD 5M 40 teeth length 200mm material aluminium SKU: 17294000](https://maedler.in/product/timing-bar-htd-5m-40-teeth-length-200mm-material-aluminium-sku-17294000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 38 teeth length 200mm material steel SKU: 17293801](https://maedler.in/product/timing-bar-htd-5m-38-teeth-length-200mm-material-steel-sku-17293801/): Material: Steel. - [timing bar HTD 5M 38 teeth length 200mm material aluminium SKU: 17293800](https://maedler.in/product/timing-bar-htd-5m-38-teeth-length-200mm-material-aluminium-sku-17293800/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 36 teeth length 200mm material steel SKU: 17293601](https://maedler.in/product/timing-bar-htd-5m-36-teeth-length-200mm-material-steel-sku-17293601/): Material: Steel. - [timing bar HTD 5M 36 teeth length 200mm material aluminium SKU: 17293600](https://maedler.in/product/timing-bar-htd-5m-36-teeth-length-200mm-material-aluminium-sku-17293600/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 34 teeth length 200mm material steel SKU: 17293401](https://maedler.in/product/timing-bar-htd-5m-34-teeth-length-200mm-material-steel-sku-17293401/): Material: Steel. - [timing bar HTD 5M 34 teeth length 200mm material aluminium SKU: 17293400](https://maedler.in/product/timing-bar-htd-5m-34-teeth-length-200mm-material-aluminium-sku-17293400/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 32 teeth length 200mm material steel SKU: 17293201](https://maedler.in/product/timing-bar-htd-5m-32-teeth-length-200mm-material-steel-sku-17293201/): Material: Steel. - [timing bar HTD 5M 32 teeth length 200mm material aluminium SKU: 17293200](https://maedler.in/product/timing-bar-htd-5m-32-teeth-length-200mm-material-aluminium-sku-17293200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 30 teeth length 200mm material steel SKU: 17293001](https://maedler.in/product/timing-bar-htd-5m-30-teeth-length-200mm-material-steel-sku-17293001/): Material: Steel. - [timing bar HTD 5M 30 teeth length 200mm material aluminium SKU: 17293000](https://maedler.in/product/timing-bar-htd-5m-30-teeth-length-200mm-material-aluminium-sku-17293000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 28 teeth length 200mm material steel SKU: 17292801](https://maedler.in/product/timing-bar-htd-5m-28-teeth-length-200mm-material-steel-sku-17292801/): Material: Steel. - [timing bar HTD 5M 28 teeth length 200mm material aluminium SKU: 17292800](https://maedler.in/product/timing-bar-htd-5m-28-teeth-length-200mm-material-aluminium-sku-17292800/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 27 teeth length 200mm material steel SKU: 17292701](https://maedler.in/product/timing-bar-htd-5m-27-teeth-length-200mm-material-steel-sku-17292701/): Material: Steel. - [timing bar HTD 5M 27 teeth length 200mm material aluminium SKU: 17292700](https://maedler.in/product/timing-bar-htd-5m-27-teeth-length-200mm-material-aluminium-sku-17292700/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 26 teeth length 200mm material steel SKU: 17292601](https://maedler.in/product/timing-bar-htd-5m-26-teeth-length-200mm-material-steel-sku-17292601/): Material: Steel. - [timing bar HTD 5M 26 teeth length 200mm material aluminium SKU: 17292600](https://maedler.in/product/timing-bar-htd-5m-26-teeth-length-200mm-material-aluminium-sku-17292600/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 25 teeth length 200mm material steel SKU: 17292501](https://maedler.in/product/timing-bar-htd-5m-25-teeth-length-200mm-material-steel-sku-17292501/): Material: Steel. - [timing bar HTD 5M 25 teeth length 200mm material aluminium SKU: 17292500](https://maedler.in/product/timing-bar-htd-5m-25-teeth-length-200mm-material-aluminium-sku-17292500/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 24 teeth length 200mm material steel SKU: 17292401](https://maedler.in/product/timing-bar-htd-5m-24-teeth-length-200mm-material-steel-sku-17292401/): Material: Steel. - [timing bar HTD 5M 24 teeth length 200mm material aluminium SKU: 17292400](https://maedler.in/product/timing-bar-htd-5m-24-teeth-length-200mm-material-aluminium-sku-17292400/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 23 teeth length 200mm material steel SKU: 17292301](https://maedler.in/product/timing-bar-htd-5m-23-teeth-length-200mm-material-steel-sku-17292301/): Material: Steel. - [timing bar HTD 5M 23 teeth length 200mm material aluminium SKU: 17292300](https://maedler.in/product/timing-bar-htd-5m-23-teeth-length-200mm-material-aluminium-sku-17292300/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 22 teeth length 200mm material steel SKU: 17292201](https://maedler.in/product/timing-bar-htd-5m-22-teeth-length-200mm-material-steel-sku-17292201/): Material: Steel. - [timing bar HTD 5M 22 teeth length 200mm material aluminium SKU: 17292200](https://maedler.in/product/timing-bar-htd-5m-22-teeth-length-200mm-material-aluminium-sku-17292200/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 21 teeth length 200mm material steel SKU: 17292101](https://maedler.in/product/timing-bar-htd-5m-21-teeth-length-200mm-material-steel-sku-17292101/): Material: Steel. - [timing bar HTD 5M 21 teeth length 200mm material aluminium SKU: 17292100](https://maedler.in/product/timing-bar-htd-5m-21-teeth-length-200mm-material-aluminium-sku-17292100/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 20 teeth length 200mm material steel SKU: 17292001](https://maedler.in/product/timing-bar-htd-5m-20-teeth-length-200mm-material-steel-sku-17292001/): Material: Steel. - [timing bar HTD 5M 20 teeth length 200mm material aluminium SKU: 17292000](https://maedler.in/product/timing-bar-htd-5m-20-teeth-length-200mm-material-aluminium-sku-17292000/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 19 teeth length 200mm material steel SKU: 17291901](https://maedler.in/product/timing-bar-htd-5m-19-teeth-length-200mm-material-steel-sku-17291901/): Material: Steel. - [timing bar HTD 5M 19 teeth length 200mm material aluminium SKU: 17291900](https://maedler.in/product/timing-bar-htd-5m-19-teeth-length-200mm-material-aluminium-sku-17291900/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 18 teeth length 200mm material steel SKU: 17291801](https://maedler.in/product/timing-bar-htd-5m-18-teeth-length-200mm-material-steel-sku-17291801/): Material: Steel. - [timing bar HTD 5M 18 teeth length 200mm material aluminium SKU: 17291800](https://maedler.in/product/timing-bar-htd-5m-18-teeth-length-200mm-material-aluminium-sku-17291800/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 17 teeth toothed length min. 175mm total length 200mm material steel SKU: 17291701](https://maedler.in/product/timing-bar-htd-5m-17-teeth-toothed-length-min-175mm-total-length-200mm-material-steel-sku-17291701/): Material: Steel. - [timing bar HTD 5M 17 teeth toothed length min. 175mm total length 200mm material aluminium SKU: 17291700](https://maedler.in/product/timing-bar-htd-5m-17-teeth-toothed-length-min-175mm-total-length-200mm-material-aluminium-sku-17291700/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 16 teeth toothed length min. 175mm total length 200mm material steel SKU: 17291601](https://maedler.in/product/timing-bar-htd-5m-16-teeth-toothed-length-min-175mm-total-length-200mm-material-steel-sku-17291601/): Material: Steel. - [timing bar HTD 5M 16 teeth toothed length min. 175mm total length 200mm material aluminium SKU: 17291600](https://maedler.in/product/timing-bar-htd-5m-16-teeth-toothed-length-min-175mm-total-length-200mm-material-aluminium-sku-17291600/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 15 teeth toothed length min. 175mm total length 200mm material steel SKU: 17291501](https://maedler.in/product/timing-bar-htd-5m-15-teeth-toothed-length-min-175mm-total-length-200mm-material-steel-sku-17291501/): Material: Steel. - [timing bar HTD 5M 15 teeth toothed length min. 175mm total length 200mm material aluminium SKU: 17291500](https://maedler.in/product/timing-bar-htd-5m-15-teeth-toothed-length-min-175mm-total-length-200mm-material-aluminium-sku-17291500/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 14 teeth toothed length min. 175mm total length 200mm material steel SKU: 17291401](https://maedler.in/product/timing-bar-htd-5m-14-teeth-toothed-length-min-175mm-total-length-200mm-material-steel-sku-17291401/): Material: Steel. - [timing bar HTD 5M 14 teeth toothed length min. 175mm total length 200mm material aluminium SKU: 17291400](https://maedler.in/product/timing-bar-htd-5m-14-teeth-toothed-length-min-175mm-total-length-200mm-material-aluminium-sku-17291400/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 13 teeth length 160mm material steel SKU: 17291301](https://maedler.in/product/timing-bar-htd-5m-13-teeth-length-160mm-material-steel-sku-17291301/): Material: Steel. - [timing bar HTD 5M 13 teeth length 160mm material aluminium SKU: 17291300](https://maedler.in/product/timing-bar-htd-5m-13-teeth-length-160mm-material-aluminium-sku-17291300/): Material: Aluminium similar to EN AW2017A. - [timing bar HTD 5M 12 teeth length 160mm material steel SKU: 17291201](https://maedler.in/product/timing-bar-htd-5m-12-teeth-length-160mm-material-steel-sku-17291201/): Material: Steel. - [timing bar HTD 5M 12 teeth length 160mm material aluminium SKU: 17291200](https://maedler.in/product/timing-bar-htd-5m-12-teeth-length-160mm-material-aluminium-sku-17291200/): Material: Aluminium similar to EN AW2017A. - [timing belt pulley HTD-5M, 112 teeth, for belt width 25mm, for taper-bush 2012 SKU: 17277494](https://maedler.in/product/timing-belt-pulley-htd-5m-112-teeth-for-belt-width-25mm-for-taper-bush-2012-sku-17277494/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 90 teeth, for belt width 25mm, for taper-bush 1610 SKU: 17277490](https://maedler.in/product/timing-belt-pulley-htd-5m-90-teeth-for-belt-width-25mm-for-taper-bush-1610-sku-17277490/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 80 teeth, for belt width 25mm, for taper-bush 1610 SKU: 17277480](https://maedler.in/product/timing-belt-pulley-htd-5m-80-teeth-for-belt-width-25mm-for-taper-bush-1610-sku-17277480/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 72 teeth, for belt width 25mm, for taper-bush 1610 SKU: 17277472](https://maedler.in/product/timing-belt-pulley-htd-5m-72-teeth-for-belt-width-25mm-for-taper-bush-1610-sku-17277472/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 64 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277464](https://maedler.in/product/timing-belt-pulley-htd-5m-64-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277464/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 60 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277460](https://maedler.in/product/timing-belt-pulley-htd-5m-60-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277460/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [timing belt pulley HTD-5M, 56 teeth, for belt width 25mm, for taper-bush 1210 SKU: 17277456](https://maedler.in/product/timing-belt-pulley-htd-5m-56-teeth-for-belt-width-25mm-for-taper-bush-1210-sku-17277456/): Material: Phosphated steel. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Flange for timing belt pulley thickness 1.5mm Ø 97 x 93 x 83mm steel zinc plated SKU: 16010318](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-97-x-93-x-83mm-steel-zinc-plated-sku-16010318/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 93 x 89 x 80mm steel zinc plated SKU: 16010317](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-93-x-89-x-80mm-steel-zinc-plated-sku-16010317/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 91 x 85.5 x 76mm steel zinc plated SKU: 16010316](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-91-x-85-5-x-76mm-steel-zinc-plated-sku-16010316/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 87 x 82.5 x 72mm steel zinc plated SKU: 16010315](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-87-x-82-5-x-72mm-steel-zinc-plated-sku-16010315/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 83 x 76.5 x 68mm steel zinc plated SKU: 16010314](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-83-x-76-5-x-68mm-steel-zinc-plated-sku-16010314/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 79 x 73.5 x 64mm steel zinc plated SKU: 16010313](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-79-x-73-5-x-64mm-steel-zinc-plated-sku-16010313/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 75 x 68.5 x 60mm steel zinc plated SKU: 16010312](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-75-x-68-5-x-60mm-steel-zinc-plated-sku-16010312/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 71 x 65 x 56mm steel zinc plated SKU: 16010311](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-71-x-65-x-56mm-steel-zinc-plated-sku-16010311/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 66 x 61.5 x 52mm steel zinc plated SKU: 16010310](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-66-x-61-5-x-52mm-steel-zinc-plated-sku-16010310/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 63 x 57 x 48mm steel zinc plated SKU: 16010309](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-63-x-57-x-48mm-steel-zinc-plated-sku-16010309/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 60 x 57 x 47mm steel zinc plated SKU: 16010308](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-60-x-57-x-47mm-steel-zinc-plated-sku-16010308/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 57 x 53 x 46mm steel zinc plated SKU: 16010307](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-57-x-53-x-46mm-steel-zinc-plated-sku-16010307/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 54 x 50.5 x 43mm steel zinc plated SKU: 16010306](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-54-x-50-5-x-43mm-steel-zinc-plated-sku-16010306/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 51 x 47.5 x 40mm steel zinc plated SKU: 16010305](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-51-x-47-5-x-40mm-steel-zinc-plated-sku-16010305/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 48 x 43.5 x 37mm steel zinc plated SKU: 16010304](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-48-x-43-5-x-37mm-steel-zinc-plated-sku-16010304/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 44 x 40 x 33mm steel zinc plated SKU: 16010303](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-44-x-40-x-33mm-steel-zinc-plated-sku-16010303/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 42 x 38 x 30.5mm steel zinc plated SKU: 16010302](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-42-x-38-x-30-5mm-steel-zinc-plated-sku-16010302/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 38 x 34 x 28mm steel zinc plated SKU: 16010301](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-38-x-34-x-28mm-steel-zinc-plated-sku-16010301/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 36 x 31 x 25mm steel zinc plated SKU: 16010300](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-36-x-31-x-25mm-steel-zinc-plated-sku-16010300/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 47 x 43 x 37mm steel zinc plated SKU: 16010232](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-47-x-43-x-37mm-steel-zinc-plated-sku-16010232/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 43 x 39 x 33mm steel zinc plated SKU: 16010231](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-43-x-39-x-33mm-steel-zinc-plated-sku-16010231/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 35 x 32 x 25mm steel zinc plated SKU: 16010230](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-35-x-32-x-25mm-steel-zinc-plated-sku-16010230/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 30 x 25 x 21.5mm steel zinc plated SKU: 16010229](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-30-x-25-x-21-5mm-steel-zinc-plated-sku-16010229/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 24 x 20 x 16mm steel zinc plated SKU: 16010228](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-24-x-20-x-16mm-steel-zinc-plated-sku-16010228/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 22 x 20 x 14mm steel zinc plated SKU: 16010227](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-22-x-20-x-14mm-steel-zinc-plated-sku-16010227/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 131 x 125.5 x 115mm steel zinc plated SKU: 16010226](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-131-x-125-5-x-115mm-steel-zinc-plated-sku-16010226/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 119 x 113.5 x 103mm steel zinc plated SKU: 16010225](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-119-x-113-5-x-103mm-steel-zinc-plated-sku-16010225/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 106 x 101 x 90mm steel zinc plated SKU: 16010224](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-106-x-101-x-90mm-steel-zinc-plated-sku-16010224/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 97 x 93 x 83mm steel zinc plated SKU: 16010223](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-97-x-93-x-83mm-steel-zinc-plated-sku-16010223/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 93 x 89 x 80mm steel zinc plated SKU: 16010222](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-93-x-89-x-80mm-steel-zinc-plated-sku-16010222/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 91 x 85.5 x 76mm steel zinc plated SKU: 16010221](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-91-x-85-5-x-76mm-steel-zinc-plated-sku-16010221/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 87 x 82.5 x 72mm steel zinc plated SKU: 16010220](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-87-x-82-5-x-72mm-steel-zinc-plated-sku-16010220/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 83 x 76.5 x 68mm steel zinc plated SKU: 16010219](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-83-x-76-5-x-68mm-steel-zinc-plated-sku-16010219/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 75 x 68.5 x 60mm steel zinc plated SKU: 16010218](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-75-x-68-5-x-60mm-steel-zinc-plated-sku-16010218/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 71 x 65 x 56mm steel zinc plated SKU: 16010217](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-71-x-65-x-56mm-steel-zinc-plated-sku-16010217/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 66 x 61.5 x 52mm steel zinc plated SKU: 16010216](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-66-x-61-5-x-52mm-steel-zinc-plated-sku-16010216/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 63 x 57 x 48mm steel zinc plated SKU: 16010215](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-63-x-57-x-48mm-steel-zinc-plated-sku-16010215/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 60 x 57 x 47mm steel zinc plated SKU: 16010214](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-60-x-57-x-47mm-steel-zinc-plated-sku-16010214/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 57 x 53 x 46mm steel zinc plated SKU: 16010213](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-57-x-53-x-46mm-steel-zinc-plated-sku-16010213/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 54 x 50.5 x 43mm steel zinc plated SKU: 16010212](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-54-x-50-5-x-43mm-steel-zinc-plated-sku-16010212/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 51 x 47.5 x 40mm steel zinc plated SKU: 16010211](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-51-x-47-5-x-40mm-steel-zinc-plated-sku-16010211/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 48 x 43,5 x 37mm steel zinc plated SKU: 16010210](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-48-x-435-x-37mm-steel-zinc-plated-sku-16010210/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 44 x 40 x 33mm steel zinc plated SKU: 16010209](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-44-x-40-x-33mm-steel-zinc-plated-sku-16010209/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 42 x 38 x 30.5mm steel zinc plated SKU: 16010208](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-42-x-38-x-30-5mm-steel-zinc-plated-sku-16010208/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 38 x 34 x 28mm steel zinc plated SKU: 16010207](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-38-x-34-x-28mm-steel-zinc-plated-sku-16010207/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 36 x 31 x 25mm steel zinc plated SKU: 16010206](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-36-x-31-x-25mm-steel-zinc-plated-sku-16010206/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 32 x 28 x 21.5mm steel zinc plated SKU: 16010205](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-32-x-28-x-21-5mm-steel-zinc-plated-sku-16010205/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 28 x 24 x 18mm steel zinc plated SKU: 16010204](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-28-x-24-x-18mm-steel-zinc-plated-sku-16010204/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 25 x 22 x 15mm steel zinc plated SKU: 16010203](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-25-x-22-x-15mm-steel-zinc-plated-sku-16010203/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 23 x 20 x 14mm steel zinc plated SKU: 16010202](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-23-x-20-x-14mm-steel-zinc-plated-sku-16010202/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 23 x 17.5 x 12mm steel zinc plated SKU: 16010201](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-23-x-17-5-x-12mm-steel-zinc-plated-sku-16010201/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 19.5 x 17.5 x 12mm steel zinc plated SKU: 16010200](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-19-5-x-17-5-x-12mm-steel-zinc-plated-sku-16010200/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 10 x 7 x 4,8mm steel zinc plated SKU: 16010115](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-10-x-7-x-48mm-steel-zinc-plated-sku-16010115/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 48 x 43.5 x 37mm steel zinc plated SKU: 16010114](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-48-x-43-5-x-37mm-steel-zinc-plated-sku-16010114/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 42 x 38 x 30.5mm steel zinc plated SKU: 16010113](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-42-x-38-x-30-5mm-steel-zinc-plated-sku-16010113/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 38 x 34 x 28mm steel zinc plated SKU: 16010112](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-38-x-34-x-28mm-steel-zinc-plated-sku-16010112/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 36 x 31 x 25mm steel zinc plated SKU: 16010111](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-36-x-31-x-25mm-steel-zinc-plated-sku-16010111/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 32 x 28 x 21.5mm steel zinc plated SKU: 16010110](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-32-x-28-x-21-5mm-steel-zinc-plated-sku-16010110/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 28 x 24 x 18mm steel zinc plated SKU: 16010109](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-28-x-24-x-18mm-steel-zinc-plated-sku-16010109/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 25 x 22 x 15mm steel zinc plated SKU: 16010108](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-25-x-22-x-15mm-steel-zinc-plated-sku-16010108/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 23 x 20 x 14mm steel zinc plated SKU: 16010107](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-23-x-20-x-14mm-steel-zinc-plated-sku-16010107/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 23 x 17.5 x 12mm steel zinc plated SKU: 16010106](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-23-x-17-5-x-12mm-steel-zinc-plated-sku-16010106/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 19.5 x 17.5 x 12mm steel zinc plated SKU: 16010105](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-19-5-x-17-5-x-12mm-steel-zinc-plated-sku-16010105/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 18 x 15 x 11.5mm steel zinc plated SKU: 16010104](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-18-x-15-x-11-5mm-steel-zinc-plated-sku-16010104/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 16 x 13 x 9.5mm steel zinc plated SKU: 16010102](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-16-x-13-x-9-5mm-steel-zinc-plated-sku-16010102/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 15 x 12 x 8mm steel zinc plated SKU: 16010101](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-15-x-12-x-8mm-steel-zinc-plated-sku-16010101/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 13 x 10 x 6mm steel zinc plated SKU: 16010100](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-13-x-10-x-6mm-steel-zinc-plated-sku-16010100/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [High performance V-belt XPB EPDM datum length 2800 mm SKU: 15492800](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2800-mm-sku-15492800/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2600 mm SKU: 15492600](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2600-mm-sku-15492600/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2500 mm SKU: 15492500](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2500-mm-sku-15492500/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2430 mm SKU: 15492430](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2430-mm-sku-15492430/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2410 mm SKU: 15492410](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2410-mm-sku-15492410/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2360 mm SKU: 15492360](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2360-mm-sku-15492360/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2280 mm SKU: 15492280](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2280-mm-sku-15492280/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2240 mm SKU: 15492240](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2240-mm-sku-15492240/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2180 mm SKU: 15492180](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2180-mm-sku-15492180/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2150 mm SKU: 15492150](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2150-mm-sku-15492150/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2120 mm SKU: 15492120](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2120-mm-sku-15492120/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2060 mm SKU: 15492060](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2060-mm-sku-15492060/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2040 mm SKU: 15492040](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2040-mm-sku-15492040/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2020 mm SKU: 15492020](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2020-mm-sku-15492020/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 2000 mm SKU: 15492000](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-2000-mm-sku-15492000/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1950 mm SKU: 15491950](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1950-mm-sku-15491950/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1900 mm SKU: 15491900](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1900-mm-sku-15491900/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1860 mm SKU: 15491860](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1860-mm-sku-15491860/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1850 mm SKU: 15491850](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1850-mm-sku-15491850/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1800 mm SKU: 15491800](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1800-mm-sku-15491800/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1750 mm SKU: 15491750](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1750-mm-sku-15491750/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1700 mm SKU: 15491700](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1700-mm-sku-15491700/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1690 mm SKU: 15491690](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1690-mm-sku-15491690/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1650 mm SKU: 15491650](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1650-mm-sku-15491650/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1600 mm SKU: 15491600](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1600-mm-sku-15491600/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1590 mm SKU: 15491590](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1590-mm-sku-15491590/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1550 mm SKU: 15491550](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1550-mm-sku-15491550/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1510 mm SKU: 15491510](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1510-mm-sku-15491510/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1500 mm SKU: 15491500](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1500-mm-sku-15491500/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1450 mm SKU: 15491450](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1450-mm-sku-15491450/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1400 mm SKU: 15491400](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1400-mm-sku-15491400/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1340 mm SKU: 15491340](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1340-mm-sku-15491340/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [High performance V-belt XPB EPDM datum length 1320 mm SKU: 15491320](https://maedler.in/product/high-performance-v-belt-xpb-epdm-datum-length-1320-mm-sku-15491320/): Material: High Performance EPDM with polyester cord. Advanced: These raw edged, cogged EPDM-V-belts are top products with high-strength tensile members for improved energy efficiency and drive performance. Powerful: The transmittable power is more than double as it is at normal narrow V-belts and more than triple as it is at classic V-belts. Maintenance-free: Due to the minimal elongation, a retensioning is normally not requiered. Versatile use: With good chemical resitance and a large temperature range, these belts a ideal for force-locking drives. Existing narrow V-belts and classic V-belts can be replaced without problems. Common V-belt pulleys are suitable for all these three kinds of belts. Because of the tight length tolerances, the belts can be used in sets without measuring. Operating temperatur: -40° to +130°C. V-belts XPB are a useful substitute for SPB and 17. Width b = 16.3 mm. Height h = 13 mm. Smallest medium pulley diametre = 112 mm. Weight per Metre 0.183 kg. - [Neoprene timing belt HTD 5M width 25mm Lw 2000mm 400 teeth SKU: 17358200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-2000mm-400-teeth-sku-17358200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1895mm 379 teeth SKU: 17357900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1895mm-379-teeth-sku-17357900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1870mm 374 teeth SKU: 17357800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1870mm-374-teeth-sku-17357800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1800mm 360 teeth SKU: 17357600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1800mm-360-teeth-sku-17357600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1790mm 358 teeth SKU: 17357500](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1790mm-358-teeth-sku-17357500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1595mm 319 teeth SKU: 17357100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1595mm-319-teeth-sku-17357100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1500mm 300 teeth SKU: 17356900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1500mm-300-teeth-sku-17356900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1420mm 284 teeth SKU: 17356700](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1420mm-284-teeth-sku-17356700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1270mm 254 teeth SKU: 17356300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1270mm-254-teeth-sku-17356300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1125mm 225 teeth SKU: 17355900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1125mm-225-teeth-sku-17355900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1050mm 210 teeth SKU: 17355600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1050mm-210-teeth-sku-17355600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 1000mm 200 teeth SKU: 17355400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-1000mm-200-teeth-sku-17355400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 950mm 190 teeth SKU: 17355200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-950mm-190-teeth-sku-17355200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 925mm 185 teeth SKU: 17355100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-925mm-185-teeth-sku-17355100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 890mm 178 teeth SKU: 17354900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-890mm-178-teeth-sku-17354900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 835mm 167 teeth SKU: 17354600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-835mm-167-teeth-sku-17354600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 800mm 160 teeth SKU: 17354400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-800mm-160-teeth-sku-17354400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 755mm 151 teeth SKU: 17354200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-755mm-151-teeth-sku-17354200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 740mm 148 teeth SKU: 17354100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-740mm-148-teeth-sku-17354100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 710mm 142 teeth SKU: 17353900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-710mm-142-teeth-sku-17353900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 665mm 133 teeth SKU: 17353600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-665mm-133-teeth-sku-17353600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 635mm 127 teeth SKU: 17353400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-635mm-127-teeth-sku-17353400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 615mm 123 teeth SKU: 17353300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-615mm-123-teeth-sku-17353300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 600mm 120 teeth SKU: 17353200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-600mm-120-teeth-sku-17353200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 565mm 113 teeth SKU: 17353000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-565mm-113-teeth-sku-17353000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 535mm 107 teeth SKU: 17352800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-535mm-107-teeth-sku-17352800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 500mm 100 teeth SKU: 17352600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-500mm-100-teeth-sku-17352600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 450mm 90 teeth SKU: 17352200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-450mm-90-teeth-sku-17352200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 425mm 85 teeth SKU: 17352000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-425mm-85-teeth-sku-17352000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 400mm 80 teeth SKU: 17351800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-400mm-80-teeth-sku-17351800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 375mm 75 teeth SKU: 17351600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-375mm-75-teeth-sku-17351600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 350mm 70 teeth SKU: 17351400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-350mm-70-teeth-sku-17351400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm Lw 330mm 66 teeth SKU: 17351200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-330mm-66-teeth-sku-17351200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 25mm 5M-25 open length SKU: 17350000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-5m-25-open-length-sku-17350000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 5M belt width 15mm SKU: 17339900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-5m-belt-width-15mm-sku-17339900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 5M width 15mm Lw 2525mm 505 teeth SKU: 17338800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-2525mm-505-teeth-sku-17338800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 2000mm 400 teeth SKU: 17338200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-2000mm-400-teeth-sku-17338200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1895mm 379 teeth SKU: 17337900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1895mm-379-teeth-sku-17337900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1870mm 374 teeth SKU: 17337800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1870mm-374-teeth-sku-17337800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1800mm 360 teeth SKU: 17337600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1800mm-360-teeth-sku-17337600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1790mm 358 teeth SKU: 17337500](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1790mm-358-teeth-sku-17337500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1595mm 319 teeth SKU: 17337100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1595mm-319-teeth-sku-17337100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1500mm 300 teeth SKU: 17336900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1500mm-300-teeth-sku-17336900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1420mm 284 teeth SKU: 17336700](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1420mm-284-teeth-sku-17336700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1270mm 254 teeth SKU: 17336300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1270mm-254-teeth-sku-17336300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1125mm 225 teeth SKU: 17335900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1125mm-225-teeth-sku-17335900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1050mm 210 teeth SKU: 17335600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1050mm-210-teeth-sku-17335600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 1000mm 200 teeth SKU: 17335400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-1000mm-200-teeth-sku-17335400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 950mm 190 teeth SKU: 17335200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-950mm-190-teeth-sku-17335200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 925mm 185 teeth SKU: 17335100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-925mm-185-teeth-sku-17335100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 890mm 178 teeth SKU: 17334900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-890mm-178-teeth-sku-17334900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 835mm 167 teeth SKU: 17334600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-835mm-167-teeth-sku-17334600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 800mm 160 teeth SKU: 17334400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-800mm-160-teeth-sku-17334400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 755mm 151 teeth SKU: 17334200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-755mm-151-teeth-sku-17334200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 740mm 148 teeth SKU: 17334100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-740mm-148-teeth-sku-17334100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 710mm 142 teeth SKU: 17333900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-710mm-142-teeth-sku-17333900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 665mm 133 teeth SKU: 17333600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-665mm-133-teeth-sku-17333600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 635mm 127 teeth SKU: 17333400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-635mm-127-teeth-sku-17333400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 615mm 123 teeth SKU: 17333300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-615mm-123-teeth-sku-17333300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 600mm 120 teeth SKU: 17333200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-600mm-120-teeth-sku-17333200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 565mm 113 teeth SKU: 17333000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-565mm-113-teeth-sku-17333000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 535mm 107 teeth SKU: 17332800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-535mm-107-teeth-sku-17332800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 500mm 100 teeth SKU: 17332600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-500mm-100-teeth-sku-17332600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 450mm 90 teeth SKU: 17332200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-450mm-90-teeth-sku-17332200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 425mm 85 teeth SKU: 17332000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-425mm-85-teeth-sku-17332000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 400mm 80 teeth SKU: 17331800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-400mm-80-teeth-sku-17331800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 375mm 75 teeth SKU: 17331600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-375mm-75-teeth-sku-17331600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 350mm 70 teeth SKU: 17331400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-350mm-70-teeth-sku-17331400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm Lw 330mm 66 teeth SKU: 17331200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-lw-330mm-66-teeth-sku-17331200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 15mm 5M-15 open length SKU: 17330000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-15mm-5m-15-open-length-sku-17330000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 5M belt width 10mm SKU: 17319900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-5m-belt-width-10mm-sku-17319900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 5M width 9mm Lw 2525mm 505 teeth SKU: 17318800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-2525mm-505-teeth-sku-17318800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 2000mm 400 teeth SKU: 17318200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-2000mm-400-teeth-sku-17318200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1895mm 379 teeth SKU: 17317900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1895mm-379-teeth-sku-17317900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1870mm 374 teeth SKU: 17317800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1870mm-374-teeth-sku-17317800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1800mm 360 teeth SKU: 17317600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1800mm-360-teeth-sku-17317600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1790mm 358 teeth SKU: 17317500](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1790mm-358-teeth-sku-17317500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1595mm 319 teeth SKU: 17317100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1595mm-319-teeth-sku-17317100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1500mm 300 teeth SKU: 17316900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1500mm-300-teeth-sku-17316900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1420mm 284 teeth SKU: 17316700](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1420mm-284-teeth-sku-17316700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1270mm 254 teeth SKU: 17316300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1270mm-254-teeth-sku-17316300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1125mm 225 teeth SKU: 17315900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1125mm-225-teeth-sku-17315900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1050mm 210 teeth SKU: 17315600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1050mm-210-teeth-sku-17315600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 1000mm 200 teeth SKU: 17315400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-1000mm-200-teeth-sku-17315400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 950mm 190 teeth SKU: 17315200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-950mm-190-teeth-sku-17315200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 925mm 185 teeth SKU: 17315100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-925mm-185-teeth-sku-17315100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 890mm 178 teeth SKU: 17314900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-890mm-178-teeth-sku-17314900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 835mm 167 teeth SKU: 17314600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-835mm-167-teeth-sku-17314600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 800mm 160 teeth SKU: 17314400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-800mm-160-teeth-sku-17314400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 755mm 151 teeth SKU: 17314200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-755mm-151-teeth-sku-17314200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 740mm 148 teeth SKU: 17314100](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-740mm-148-teeth-sku-17314100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 710mm 142 teeth SKU: 17313900](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-710mm-142-teeth-sku-17313900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 665mm 133 teeth SKU: 17313600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-665mm-133-teeth-sku-17313600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 635mm 127 teeth SKU: 17313400](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-635mm-127-teeth-sku-17313400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 615mm 123 teeth SKU: 17313300](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-615mm-123-teeth-sku-17313300/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 600mm 120 teeth SKU: 17313200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-600mm-120-teeth-sku-17313200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 565mm 113 teeth SKU: 17313000](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-565mm-113-teeth-sku-17313000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 535mm 107 teeth SKU: 17312800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-535mm-107-teeth-sku-17312800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 500mm 100 teeth SKU: 17312600](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-500mm-100-teeth-sku-17312600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 5M width 9mm Lw 450mm 90 teeth SKU: 17312200](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-9mm-lw-450mm-90-teeth-sku-17312200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Flange for timing belt pulley thickness 1.5mm Ø 87 x 82.5 x 72mm stainless steel SKU: 16019315](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-87-x-82-5-x-72mm-stainless-steel-sku-16019315/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 83 x 76.5 x 68mm stainless steel SKU: 16019314](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-83-x-76-5-x-68mm-stainless-steel-sku-16019314/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 79 x 73.5 x 64mm stainless steel SKU: 16019313](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-79-x-73-5-x-64mm-stainless-steel-sku-16019313/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 75 x 68.5 x 60mm stainless steel SKU: 16019312](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-75-x-68-5-x-60mm-stainless-steel-sku-16019312/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 71 x 65 x 56mm stainless steel SKU: 16019311](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-71-x-65-x-56mm-stainless-steel-sku-16019311/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 66 x 61.5 x 52mm stainless steel SKU: 16019310](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-66-x-61-5-x-52mm-stainless-steel-sku-16019310/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 63 x 57 x 48mm stainless steel SKU: 16019309](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-63-x-57-x-48mm-stainless-steel-sku-16019309/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 60 x 57 x 47mm stainless steel SKU: 16019308](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-60-x-57-x-47mm-stainless-steel-sku-16019308/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 57 x 53 x 46mm stainless steel SKU: 16019307](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-57-x-53-x-46mm-stainless-steel-sku-16019307/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 54 x 50.5 x 43mm stainless steel SKU: 16019306](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-54-x-50-5-x-43mm-stainless-steel-sku-16019306/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 51 x 47.5 x 40mm stainless steel SKU: 16019305](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-51-x-47-5-x-40mm-stainless-steel-sku-16019305/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 48 x 43.5 x 37mm stainless steel SKU: 16019304](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-48-x-43-5-x-37mm-stainless-steel-sku-16019304/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 44 x 40 x 33mm stainless steel SKU: 16019303](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-44-x-40-x-33mm-stainless-steel-sku-16019303/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 42 x 38 x 30.5mm stainless steel SKU: 16019302](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-42-x-38-x-30-5mm-stainless-steel-sku-16019302/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 38 x 34 x 28mm stainless steel SKU: 16019301](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-38-x-34-x-28mm-stainless-steel-sku-16019301/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 36 x 31 x 25mm stainless steel SKU: 16019300](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-36-x-31-x-25mm-stainless-steel-sku-16019300/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 47 x 43 x 37mm stainless steel SKU: 16019232](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-47-x-43-x-37mm-stainless-steel-sku-16019232/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 43 x 39 x 33mm stainless steel SKU: 16019231](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-43-x-39-x-33mm-stainless-steel-sku-16019231/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 35 x 32 x 25mm stainless steel SKU: 16019230](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-35-x-32-x-25mm-stainless-steel-sku-16019230/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 30 x 25 x 21.5mm stainless steel SKU: 16019229](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-30-x-25-x-21-5mm-stainless-steel-sku-16019229/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 24 x 20 x 16mm stainless steel SKU: 16019228](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-24-x-20-x-16mm-stainless-steel-sku-16019228/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 22 x 20 x 14mm stainless steel SKU: 16019227](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-22-x-20-x-14mm-stainless-steel-sku-16019227/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 131 x 125.5 x 115mm stainless steel SKU: 16019226](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-131-x-125-5-x-115mm-stainless-steel-sku-16019226/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 119 x 113.5 x 103mm stainless steel SKU: 16019225](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-119-x-113-5-x-103mm-stainless-steel-sku-16019225/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 106 x 101 x 90mm stainless steel SKU: 16019224](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-106-x-101-x-90mm-stainless-steel-sku-16019224/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 97 x 93 x 83mm stainless steel SKU: 16019223](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-97-x-93-x-83mm-stainless-steel-sku-16019223/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 93 x 89 x 80mm stainless steel SKU: 16019222](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-93-x-89-x-80mm-stainless-steel-sku-16019222/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 91 x 85.5 x 76mm stainless steel SKU: 16019221](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-91-x-85-5-x-76mm-stainless-steel-sku-16019221/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 87 x 82.5 x 72mm stainless steel SKU: 16019220](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-87-x-82-5-x-72mm-stainless-steel-sku-16019220/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 83 x 76.5 x 68mm stainless steel SKU: 16019219](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-83-x-76-5-x-68mm-stainless-steel-sku-16019219/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 75 x 68.5 x 60mm stainless steel SKU: 16019218](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-75-x-68-5-x-60mm-stainless-steel-sku-16019218/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 71 x 65 x 56mm stainless steel SKU: 16019217](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-71-x-65-x-56mm-stainless-steel-sku-16019217/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 66 x 61.5 x 52mm stainless steel SKU: 16019216](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-66-x-61-5-x-52mm-stainless-steel-sku-16019216/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 63 x 57 x 48mm stainless steel SKU: 16019215](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-63-x-57-x-48mm-stainless-steel-sku-16019215/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 60 x 57 x 47mm stainless steel SKU: 16019214](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-60-x-57-x-47mm-stainless-steel-sku-16019214/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 57 x 53 x 46mm stainless steel SKU: 16019213](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-57-x-53-x-46mm-stainless-steel-sku-16019213/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 54 x 50.5 x 43mm stainless steel SKU: 16019212](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-54-x-50-5-x-43mm-stainless-steel-sku-16019212/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 51 x 47.5 x 40mm stainless steel SKU: 16019211](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-51-x-47-5-x-40mm-stainless-steel-sku-16019211/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 48 x 43,5 x 37mm stainless steel SKU: 16019210](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-48-x-435-x-37mm-stainless-steel-sku-16019210/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 44 x 40 x 33mm stainless steel SKU: 16019209](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-44-x-40-x-33mm-stainless-steel-sku-16019209/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 42 x 38 x 30.5mm stainless steel SKU: 16019208](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-42-x-38-x-30-5mm-stainless-steel-sku-16019208/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 38 x 34 x 28mm stainless steel SKU: 16019207](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-38-x-34-x-28mm-stainless-steel-sku-16019207/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 36 x 31 x 25mm stainless steel SKU: 16019206](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-36-x-31-x-25mm-stainless-steel-sku-16019206/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 32 x 28 x 21.5mm stainless steel SKU: 16019205](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-32-x-28-x-21-5mm-stainless-steel-sku-16019205/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 28 x 24 x 18mm stainless steel SKU: 16019204](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-28-x-24-x-18mm-stainless-steel-sku-16019204/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 25 x 22 x 15mm stainless steel SKU: 16019203](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-25-x-22-x-15mm-stainless-steel-sku-16019203/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 23 x 20 x 14mm stainless steel SKU: 16019202](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-23-x-20-x-14mm-stainless-steel-sku-16019202/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 23 x 17.5 x 12mm stainless steel SKU: 16019201](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-23-x-17-5-x-12mm-stainless-steel-sku-16019201/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1mm Ø 19.5 x 17.5 x 12mm stainless steel SKU: 16019200](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1mm-o-19-5-x-17-5-x-12mm-stainless-steel-sku-16019200/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 10 x 7 x 4,8mm stainless steel SKU: 16019115](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-10-x-7-x-48mm-stainless-steel-sku-16019115/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 48 x 43.5 x 37mm stainless steel SKU: 16019114](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-48-x-43-5-x-37mm-stainless-steel-sku-16019114/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 42 x 38 x 30.5mm stainless steel SKU: 16019113](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-42-x-38-x-30-5mm-stainless-steel-sku-16019113/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 38 x 34 x 28mm stainless steel SKU: 16019112](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-38-x-34-x-28mm-stainless-steel-sku-16019112/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 36 x 31 x 25mm stainless steel SKU: 16019111](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-36-x-31-x-25mm-stainless-steel-sku-16019111/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 32 x 28 x 21.5mm stainless steel SKU: 16019110](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-32-x-28-x-21-5mm-stainless-steel-sku-16019110/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 28 x 24 x 18mm stainless steel SKU: 16019109](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-28-x-24-x-18mm-stainless-steel-sku-16019109/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 25 x 22 x 15mm stainless steel SKU: 16019108](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-25-x-22-x-15mm-stainless-steel-sku-16019108/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 23 x 20 x 14mm stainless steel SKU: 16019107](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-23-x-20-x-14mm-stainless-steel-sku-16019107/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 23 x 17.5 x 12mm stainless steel SKU: 16019106](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-23-x-17-5-x-12mm-stainless-steel-sku-16019106/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 19.5 x 17.5 x 12mm stainless steel SKU: 16019105](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-19-5-x-17-5-x-12mm-stainless-steel-sku-16019105/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 18 x 15 x 11.5mm stainless steel SKU: 16019104](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-18-x-15-x-11-5mm-stainless-steel-sku-16019104/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 16 x 13 x 9.5mm stainless steel SKU: 16019102](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-16-x-13-x-9-5mm-stainless-steel-sku-16019102/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 15 x 12 x 8mm stainless steel SKU: 16019101](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-15-x-12-x-8mm-stainless-steel-sku-16019101/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 0.5mm Ø 13 x 10 x 6mm stainless steel SKU: 16019100](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-0-5mm-o-13-x-10-x-6mm-stainless-steel-sku-16019100/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 296 x 287 x 252mm steel zinc plated SKU: 16010418](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-296-x-287-x-252mm-steel-zinc-plated-sku-16010418/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 256 x 247 x 225mm steel zinc plated SKU: 16010416](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-256-x-247-x-225mm-steel-zinc-plated-sku-16010416/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 256 x 240 x 220mm steel zinc plated SKU: 16010415](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-256-x-240-x-220mm-steel-zinc-plated-sku-16010415/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 240 x 224 x 192mm steel zinc plated SKU: 16010414](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-240-x-224-x-192mm-steel-zinc-plated-sku-16010414/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 226 x 214 x 190mm steel zinc plated SKU: 16010412](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-226-x-214-x-190mm-steel-zinc-plated-sku-16010412/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 211 x 198 x 173mm steel zinc plated SKU: 16010411](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-211-x-198-x-173mm-steel-zinc-plated-sku-16010411/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 200 x 192.8 x 172mm steel zinc plated SKU: 16010410](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-200-x-192-8-x-172mm-steel-zinc-plated-sku-16010410/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 198 x 188 x 165mm steel zinc plated SKU: 16010409](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-198-x-188-x-165mm-steel-zinc-plated-sku-16010409/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 188 x 180 x 158mm steel zinc plated SKU: 16010407](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-188-x-180-x-158mm-steel-zinc-plated-sku-16010407/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 183 x 170 x 145mm steel zinc plated SKU: 16010406](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-183-x-170-x-145mm-steel-zinc-plated-sku-16010406/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 168 x 162 x 135mm steel zinc plated SKU: 16010405](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-168-x-162-x-135mm-steel-zinc-plated-sku-16010405/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 160 x 150 x 128mm steel zinc plated SKU: 16010404](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-160-x-150-x-128mm-steel-zinc-plated-sku-16010404/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 154 x 146 x 122mm steel zinc plated SKU: 16010403](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-154-x-146-x-122mm-steel-zinc-plated-sku-16010403/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 146 x 138 x 116mm steel zinc plated SKU: 16010402](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-146-x-138-x-116mm-steel-zinc-plated-sku-16010402/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 138 x 130 x 108mm steel zinc plated SKU: 16010401](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-138-x-130-x-108mm-steel-zinc-plated-sku-16010401/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 2.5mm Ø 127 x 120.2 x 104.7mm steel zinc plated SKU: 16010400](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-2-5mm-o-127-x-120-2-x-104-7mm-steel-zinc-plated-sku-16010400/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 83 x 76.5 x 64mm steel zinc plated SKU: 16010343](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-83-x-76-5-x-64mm-steel-zinc-plated-sku-16010343/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 200 x 195 x 181mm steel zinc plated SKU: 16010342](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-200-x-195-x-181mm-steel-zinc-plated-sku-16010342/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 192 x 187 x 173mm steel zinc plated SKU: 16010340](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-192-x-187-x-173mm-steel-zinc-plated-sku-16010340/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 184 x 179 x 165mm steel zinc plated SKU: 16010339](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-184-x-179-x-165mm-steel-zinc-plated-sku-16010339/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 168 x 163 x 149.5mm steel zinc plated SKU: 16010338](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-168-x-163-x-149-5mm-steel-zinc-plated-sku-16010338/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 158 x 154 x 142mm steel zinc plated SKU: 16010335](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-158-x-154-x-142mm-steel-zinc-plated-sku-16010335/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 152 x 147.5 x 136mm steel zinc plated SKU: 16010334](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-152-x-147-5-x-136mm-steel-zinc-plated-sku-16010334/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 148 x 143 x 132mm steel zinc plated SKU: 16010333](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-148-x-143-x-132mm-steel-zinc-plated-sku-16010333/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 143 x 139 x 127mm steel zinc plated SKU: 16010331](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-143-x-139-x-127mm-steel-zinc-plated-sku-16010331/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 140 x 134.5 x 123mm steel zinc plated SKU: 16010330](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-140-x-134-5-x-123mm-steel-zinc-plated-sku-16010330/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 138 x 132 x 112mm steel zinc plated SKU: 16010329](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-138-x-132-x-112mm-steel-zinc-plated-sku-16010329/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 135 x 130 x 119mm steel zinc plated SKU: 16010328](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-135-x-130-x-119mm-steel-zinc-plated-sku-16010328/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 127 x 122 x 111mm steel zinc plated SKU: 16010327](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-127-x-122-x-111mm-steel-zinc-plated-sku-16010327/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 123 x 117.5 x 107mm steel zinc plated SKU: 16010326](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-123-x-117-5-x-107mm-steel-zinc-plated-sku-16010326/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 119 x 113.5 x 103mm steel zinc plated SKU: 16010325](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-119-x-113-5-x-103mm-steel-zinc-plated-sku-16010325/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 115 x 110 x 99mm steel zinc plated SKU: 16010323](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-115-x-110-x-99mm-steel-zinc-plated-sku-16010323/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 111 x 106 x 94mm steel zinc plated SKU: 16010322](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-111-x-106-x-94mm-steel-zinc-plated-sku-16010322/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 106 x 101 x 90mm steel zinc plated SKU: 16010321](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-106-x-101-x-90mm-steel-zinc-plated-sku-16010321/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 103 x 97 x 86mm steel zinc plated SKU: 16010320](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-103-x-97-x-86mm-steel-zinc-plated-sku-16010320/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 98 x 92 x 79.3mm steel zinc plated SKU: 16010319](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-98-x-92-x-79-3mm-steel-zinc-plated-sku-16010319/): Material: Steel, zinc-plated.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 20mm for taper bush 1610 SKU: 17477118](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477118/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 20mm for taper bush 1610 SKU: 17477117](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477117/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 20mm for taper bush 1610 SKU: 17477116](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477116/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 20mm for taper bush 1108 SKU: 17477115](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-20mm-for-taper-bush-1108-sku-17477115/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 20mm for taper bush 1108 SKU: 17477114](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-20mm-for-taper-bush-1108-sku-17477114/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 20mm for taper bush 1108 SKU: 17477113](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-20mm-for-taper-bush-1108-sku-17477113/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 20mm for taper bush 1108 SKU: 17477112](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-20mm-for-taper-bush-1108-sku-17477112/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 20mm for taper bush 1008 SKU: 17477111](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-20mm-for-taper-bush-1008-sku-17477111/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 192 teeth for belt width 85mm SKU: 17459600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-192-teeth-for-belt-width-85mm-sku-17459600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 168 teeth for belt width 85mm SKU: 17458400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-168-teeth-for-belt-width-85mm-sku-17458400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 144 teeth for belt width 85mm SKU: 17457200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-144-teeth-for-belt-width-85mm-sku-17457200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 112 teeth for belt width 85mm SKU: 17455600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-112-teeth-for-belt-width-85mm-sku-17455600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 90 teeth for belt width 85mm SKU: 17454500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-90-teeth-for-belt-width-85mm-sku-17454500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material cast iron 80 teeth for belt width 85mm SKU: 17454000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-80-teeth-for-belt-width-85mm-sku-17454000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 85mm SKU: 17453600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-85mm-sku-17453600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 85mm SKU: 17453200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-85mm-sku-17453200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 85mm SKU: 17452800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-85mm-sku-17452800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 85mm SKU: 17452400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-85mm-sku-17452400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 85mm SKU: 17452200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-85mm-sku-17452200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 85mm SKU: 17452000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-85mm-sku-17452000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 85mm SKU: 17451900](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-85mm-sku-17451900/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 85mm SKU: 17451800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-85mm-sku-17451800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 85mm SKU: 17451700](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-85mm-sku-17451700/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 85mm SKU: 17451600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-85mm-sku-17451600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 85mm SKU: 17451500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-85mm-sku-17451500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 85mm SKU: 17451400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-85mm-sku-17451400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 85mm SKU: 17451300](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-85mm-sku-17451300/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 25 teeth for belt width 85mm SKU: 17451250](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-25-teeth-for-belt-width-85mm-sku-17451250/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 85mm SKU: 17451200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-85mm-sku-17451200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 85mm SKU: 17451100](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-85mm-sku-17451100/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 112 teeth for belt width 50mm SKU: 17445600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-112-teeth-for-belt-width-50mm-sku-17445600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 50mm SKU: 17444500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-50mm-sku-17444500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 50mm SKU: 17444000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-50mm-sku-17444000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 50mm SKU: 17443600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-50mm-sku-17443600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 50mm SKU: 17443200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-50mm-sku-17443200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 50mm SKU: 17443000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-50mm-sku-17443000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 50mm SKU: 17442800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-50mm-sku-17442800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 50mm SKU: 17442400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-50mm-sku-17442400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 50mm SKU: 17442200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-50mm-sku-17442200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 50mm SKU: 17442000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-50mm-sku-17442000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 50mm SKU: 17441900](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-50mm-sku-17441900/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 50mm SKU: 17441800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-50mm-sku-17441800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 50mm SKU: 17441700](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-50mm-sku-17441700/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 50mm SKU: 17441600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-50mm-sku-17441600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 50mm SKU: 17441500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-50mm-sku-17441500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 50mm SKU: 17441400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-50mm-sku-17441400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 50mm SKU: 17441300](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-50mm-sku-17441300/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 25 teeth for belt width 50mm SKU: 17441250](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-25-teeth-for-belt-width-50mm-sku-17441250/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 50mm SKU: 17441200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-50mm-sku-17441200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 50mm SKU: 17441100](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-50mm-sku-17441100/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 112 teeth for belt width 30mm SKU: 17425600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-112-teeth-for-belt-width-30mm-sku-17425600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 30mm SKU: 17424500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-30mm-sku-17424500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 30mm SKU: 17424000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-30mm-sku-17424000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 30mm SKU: 17423600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-30mm-sku-17423600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 30mm SKU: 17423200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-30mm-sku-17423200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 30mm SKU: 17423000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-30mm-sku-17423000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 30mm SKU: 17422800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-30mm-sku-17422800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 30mm SKU: 17422400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-30mm-sku-17422400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 30mm SKU: 17422200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-30mm-sku-17422200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 30mm SKU: 17422000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-30mm-sku-17422000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 30mm SKU: 17421900](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-30mm-sku-17421900/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 30mm SKU: 17421800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-30mm-sku-17421800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 30mm SKU: 17421700](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-30mm-sku-17421700/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 30mm SKU: 17421600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-30mm-sku-17421600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 30mm SKU: 17421500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-30mm-sku-17421500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 30mm SKU: 17421400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-30mm-sku-17421400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 30mm SKU: 17421300](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-30mm-sku-17421300/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 25 teeth for belt width 30mm SKU: 17421250](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-25-teeth-for-belt-width-30mm-sku-17421250/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 30mm SKU: 17421200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-30mm-sku-17421200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 30mm SKU: 17421100](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-30mm-sku-17421100/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 112 teeth for belt width 20mm SKU: 17415600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-112-teeth-for-belt-width-20mm-sku-17415600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 20mm SKU: 17414500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-20mm-sku-17414500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 20mm SKU: 17414000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-20mm-sku-17414000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 20mm SKU: 17413600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-20mm-sku-17413600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 20mm SKU: 17413200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-20mm-sku-17413200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 20mm SKU: 17413000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-20mm-sku-17413000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 20mm SKU: 17412800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-20mm-sku-17412800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 20mm SKU: 17412400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-20mm-sku-17412400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 20mm SKU: 17412200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-20mm-sku-17412200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 20mm SKU: 17412000](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-20mm-sku-17412000/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 20mm SKU: 17411900](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-20mm-sku-17411900/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 20mm SKU: 17411800](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-20mm-sku-17411800/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 20mm SKU: 17411700](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-20mm-sku-17411700/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 20mm SKU: 17411600](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-20mm-sku-17411600/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 20mm SKU: 17411500](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-20mm-sku-17411500/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 20mm SKU: 17411400](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-20mm-sku-17411400/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 20mm SKU: 17411300](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-20mm-sku-17411300/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 25 teeth for belt width 20mm SKU: 17411250](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-25-teeth-for-belt-width-20mm-sku-17411250/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 20mm SKU: 17411200](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-20mm-sku-17411200/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 20mm SKU: 17411100](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-20mm-sku-17411100/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 phosphated grey cast iron GG25. The functionability of a belt drive is largely influenced by the quality of the used pulley. HTD pulleys are precision components, manufactured pitch-true with special cutters. This leads to a precise meshing of teeth. - [Polyurethane timing belt HTD 5M width 50mm 5M-50 open length PAZ = Polyamide fabric on tooth side SKU: 17366701](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-50mm-5m-50-open-length-paz-polyamide-fabric-on-tooth-side-sku-17366701/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 5M width 50mm 5M-50 open length with tensile members from steel packed 2 x 25mm SKU: 17366700](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-50mm-5m-50-open-length-with-tensile-members-from-steel-packed-2-x-25mm-sku-17366700/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 5M width 25mm 5M-25 open length PAZ = Polyamide fabric on tooth side SKU: 17366501](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-25mm-5m-25-open-length-paz-polyamide-fabric-on-tooth-side-sku-17366501/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 5M width 25mm 5M-25 open length SKU: 17366500](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-25mm-5m-25-open-length-sku-17366500/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 5M width 15mm 5M-15 open length PAZ = Polyamide fabric on tooth side SKU: 17366301](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-15mm-5m-15-open-length-paz-polyamide-fabric-on-tooth-side-sku-17366301/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 5M width 15mm 5M-15 open length SKU: 17366300](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-15mm-5m-15-open-length-sku-17366300/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 5M width 10mm 5M-10 open length PAZ = Polyamide fabric on tooth side SKU: 17366101](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-10mm-5m-10-open-length-paz-polyamide-fabric-on-tooth-side-sku-17366101/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 5M width 10mm 5M-10 open length SKU: 17366100](https://maedler.in/product/polyurethane-timing-belt-htd-5m-width-10mm-5m-10-open-length-sku-17366100/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium HTD 5M belt width 25mm SKU: 17359900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-5m-belt-width-25mm-sku-17359900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 5M width 25mm Lw 2525mm 505 teeth SKU: 17358800](https://maedler.in/product/neoprene-timing-belt-htd-5m-width-25mm-lw-2525mm-505-teeth-sku-17358800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Motorcontroller SFRG 06 for DC-drives with brushes and brushless SKU: 43046006](https://maedler.in/product/motorcontroller-sfrg-06-for-dc-drives-with-brushes-and-brushless-sku-43046006/): • Intelligent motor controller with PWM output for speed setting or controlling of brushed DC motors or brushless BLDC motors. • Self-detection, if a brushed motor or a brushless motor is connected. • Supply voltage: 12 - 48 V DC. • Motor current: 2,5 A continuous load uncooled (peak 5 A). • Speed setting device or PI-controller operation (if needed, the controller operation can be parameterised by the manufacturer). • Input signals: Possible with closed contact or voltage 10 – 24 V DC (may come from SPS). • Setpoint setting possible via external pot (not included) or voltage signal 0-10 V DC (analog to input signals. • Compact version thanks to SMD technology. Also available als CANopen-Bus version (customized product with extended hardware). - [Motor-tensionig rail set SPS overall length 630mm for IEC motor size 132 with screws M10 SKU: 43018600](https://maedler.in/product/motor-tensionig-rail-set-sps-overall-length-630mm-for-iec-motor-size-132-with-screws-m10-sku-43018600/): Material: Steel. Sold in pairs: 1 x Product No. = 1 pair.* Hexagon Bolt with SW24. - [Motor-tensionig rail set SPS overall length 495mm for IEC motor sizes 100, 112 and 132 SKU: 43018400](https://maedler.in/product/motor-tensionig-rail-set-sps-overall-length-495mm-for-iec-motor-sizes-100-112-and-132-sku-43018400/): Material: Steel. Sold in pairs: 1 x Product No. = 1 pair.* Hexagon Bolt with SW24. - [Motor-tensionig rail set SPS overall length 395mm for IEC motor sizes 80 and 90 SKU: 43018200](https://maedler.in/product/motor-tensionig-rail-set-sps-overall-length-395mm-for-iec-motor-sizes-80-and-90-sku-43018200/): Material: Steel. Sold in pairs: 1 x Product No. = 1 pair.* Hexagon Bolt with SW24. - [Motor-tensionig rail set SPS overall length 312mm for IEC motor sizes 63 and 71 SKU: 43018000](https://maedler.in/product/motor-tensionig-rail-set-sps-overall-length-312mm-for-iec-motor-sizes-63-and-71-sku-43018000/): Material: Steel. Sold in pairs: 1 x Product No. = 1 pair.* Hexagon Bolt with SW24. - [Spur gear shaft made from steel with one-sided hub module 2 42 teeth toothed length 220mm total length 250mm outside diameter 88mm SKU: 24154200](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-42-teeth-toothed-length-220mm-total-length-250mm-outside-diameter-88mm-sku-24154200/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 29 teeth toothed length 220mm total length 250mm outside diameter 62mm SKU: 24152900](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-29-teeth-toothed-length-220mm-total-length-250mm-outside-diameter-62mm-sku-24152900/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 27 teeth toothed length 220mm total length 250mm outside diameter 58mm SKU: 24152700](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-27-teeth-toothed-length-220mm-total-length-250mm-outside-diameter-58mm-sku-24152700/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 23 teeth toothed length 200mm total length 250mm outside diameter 50mm SKU: 24152300](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-23-teeth-toothed-length-200mm-total-length-250mm-outside-diameter-50mm-sku-24152300/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 21 teeth toothed length 200mm total length 250mm outside diameter 46mm SKU: 24152100](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-21-teeth-toothed-length-200mm-total-length-250mm-outside-diameter-46mm-sku-24152100/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 20 teeth toothed length 200mm total length 250mm outside diameter 44mm SKU: 24152000](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-20-teeth-toothed-length-200mm-total-length-250mm-outside-diameter-44mm-sku-24152000/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 19 teeth toothed length 200mm total length 250mm outside diameter 42mm SKU: 24151900](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-19-teeth-toothed-length-200mm-total-length-250mm-outside-diameter-42mm-sku-24151900/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 17 teeth toothed length 200mm total length 250mm outside diameter 38mm SKU: 24151700](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-17-teeth-toothed-length-200mm-total-length-250mm-outside-diameter-38mm-sku-24151700/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 16 teeth toothed length 200mm total length 250mm outside diameter 36mm SKU: 24151600](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-16-teeth-toothed-length-200mm-total-length-250mm-outside-diameter-36mm-sku-24151600/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 15 teeth toothed length 200mm total length 250mm outside diameter 34mm SKU: 24151500](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-15-teeth-toothed-length-200mm-total-length-250mm-outside-diameter-34mm-sku-24151500/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 14 teeth toothed length 200mm total length 250mm outside diameter 32mm SKU: 24151400](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-14-teeth-toothed-length-200mm-total-length-250mm-outside-diameter-32mm-sku-24151400/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 2 13 teeth toothed length 200mm total length 250mm outside diameter 30mm SKU: 24151300](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-2-13-teeth-toothed-length-200mm-total-length-250mm-outside-diameter-30mm-sku-24151300/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Ratchet wheel pitch 4.71mm 80 teeth outside diameter 120mm SKU: 22778000](https://maedler.in/product/ratchet-wheel-pitch-4-71mm-80-teeth-outside-diameter-120mm-sku-22778000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet wheel pitch 4.71mm 60 teeth outside diameter 90mm SKU: 22776000](https://maedler.in/product/ratchet-wheel-pitch-4-71mm-60-teeth-outside-diameter-90mm-sku-22776000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet wheel pitch 4.71mm 40 teeth outside diameter 60mm SKU: 22774000](https://maedler.in/product/ratchet-wheel-pitch-4-71mm-40-teeth-outside-diameter-60mm-sku-22774000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet wheel pitch 4.71mm 20 teeth outside diameter 30mm SKU: 22772000](https://maedler.in/product/ratchet-wheel-pitch-4-71mm-20-teeth-outside-diameter-30mm-sku-22772000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet wheel pitch 4.71mm 120 teeth outside diameter 180mm SKU: 22771200](https://maedler.in/product/ratchet-wheel-pitch-4-71mm-120-teeth-outside-diameter-180mm-sku-22771200/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet wheel pitch 4.71mm 100 teeth outside diameter 150mm SKU: 22771000](https://maedler.in/product/ratchet-wheel-pitch-4-71mm-100-teeth-outside-diameter-150mm-sku-22771000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet made of steel length approx. 75mm width approx. 9mm SKU: 22770200](https://maedler.in/product/ratchet-made-of-steel-length-approx-75mm-width-approx-9mm-sku-22770200/): Material: St37, unhardened. Without Bore. - [Ratchet made of steel length approx. 49.5mm width approx. 6mm SKU: 22770100](https://maedler.in/product/ratchet-made-of-steel-length-approx-49-5mm-width-approx-6mm-sku-22770100/): Material: St37, unhardened. Without Bore. - [Ratchet wheel pitch 3.14mm 80 teeth outside diameter 80mm SKU: 22378000](https://maedler.in/product/ratchet-wheel-pitch-3-14mm-80-teeth-outside-diameter-80mm-sku-22378000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet wheel pitch 3.14mm 60 teeth outside diameter 60mm SKU: 22376000](https://maedler.in/product/ratchet-wheel-pitch-3-14mm-60-teeth-outside-diameter-60mm-sku-22376000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet wheel pitch 3.14mm 40 teeth outside diameter 40mm SKU: 22374000](https://maedler.in/product/ratchet-wheel-pitch-3-14mm-40-teeth-outside-diameter-40mm-sku-22374000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet wheel pitch 3.14mm 30 teeth outside diameter 30mm SKU: 22373000](https://maedler.in/product/ratchet-wheel-pitch-3-14mm-30-teeth-outside-diameter-30mm-sku-22373000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet wheel pitch 3.14mm 20 teeth outside diameter 20mm SKU: 22372000](https://maedler.in/product/ratchet-wheel-pitch-3-14mm-20-teeth-outside-diameter-20mm-sku-22372000/): Material: C45Pb up to 80 mm diametre, above C45. Unhardened. Without Hub. Bores ISO H7. Tip angle 60°. - [Ratchet made of steel length approx. 49.5mm width approx. 4mm SKU: 22370100](https://maedler.in/product/ratchet-made-of-steel-length-approx-49-5mm-width-approx-4mm-sku-22370100/): Material: St37, unhardened. Without Bore. - [Spur gear shaft made from steel with one-sided hub module 1.5 32 teeth toothed length 180mm total length 230mm outside diameter 51mm SKU: 21853200](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-5-32-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-51mm-sku-21853200/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1.5 27 teeth toothed length 180mm total length 230mm outside diameter 43.5mm SKU: 21852700](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-5-27-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-43-5mm-sku-21852700/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1.5 21 teeth toothed length 180mm total length 230mm outside diameter 34.5mm SKU: 21852100](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-5-21-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-34-5mm-sku-21852100/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1,5 20 teeth toothed length 180mm total length 230mm outside diameter 33mm SKU: 21852000](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-15-20-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-33mm-sku-21852000/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1.5 19 teeth toothed length 180mm total length 230mm outside diameter 31.5mm SKU: 21851900](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-5-19-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-31-5mm-sku-21851900/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1.5 17 teeth toothed length 180mm total length 230mm outside diameter 28.5mm SKU: 21851700](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-5-17-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-28-5mm-sku-21851700/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1.5 16 teeth toothed length 150mm total length 200mm outside diameter 27mm SKU: 21851600](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-5-16-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-27mm-sku-21851600/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1,5 15 teeth toothed length 150mm total length 200mm outside diameter 25,5mm SKU: 21851500](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-15-15-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-255mm-sku-21851500/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1.5 14 teeth toothed length 150mm total length 200mm outside diameter 24mm SKU: 21851400](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-5-14-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-24mm-sku-21851400/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1.5 13 teeth toothed length 150mm total length 200mm outside diameter 22.5mm SKU: 21851300](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-5-13-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-22-5mm-sku-21851300/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 57 teeth toothed length 180mm total length 230mm outside diameter 59mm SKU: 21455700](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-57-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-59mm-sku-21455700/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 52 teeth toothed length 180mm total length 230mm outside diameter 54mm SKU: 21455200](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-52-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-54mm-sku-21455200/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 45 teeth toothed length 180mm total length 230mm outside diameter 47mm SKU: 21454500](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-45-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-47mm-sku-21454500/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 37 teeth toothed length 180mm total length 230mm outside diameter 39mm SKU: 21453700](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-37-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-39mm-sku-21453700/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 35 teeth toothed length 180mm total length 230mm outside diameter 37mm SKU: 21453500](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-35-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-37mm-sku-21453500/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 31 teeth toothed length 180mm total length 230mm outside diameter 33mm SKU: 21453100](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-31-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-33mm-sku-21453100/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 30 teeth toothed length 180mm total length 230mm outside diameter 32mm SKU: 21453000](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-30-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-32mm-sku-21453000/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 27 teeth toothed length 180mm total length 230mm outside diameter 29mm SKU: 21452700](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-27-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-29mm-sku-21452700/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 25 teeth toothed length 180mm total length 230mm outside diameter 27mm SKU: 21452500](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-25-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-27mm-sku-21452500/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 23 teeth toothed length 180mm total length 230mm outside diameter 25mm SKU: 21452300](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-23-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-25mm-sku-21452300/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 21 teeth toothed length 180mm total length 230mm outside diameter 23mm SKU: 21452100](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-21-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-23mm-sku-21452100/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 20 teeth toothed length 180mm total length 230mm outside diameter 22mm SKU: 21452000](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-20-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-22mm-sku-21452000/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 19 teeth toothed length 180mm total length 230mm outside diameter 21mm SKU: 21451900](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-19-teeth-toothed-length-180mm-total-length-230mm-outside-diameter-21mm-sku-21451900/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 18 teeth toothed length 150mm total length 200mm outside diameter 20mm SKU: 21451800](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-18-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-20mm-sku-21451800/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 17 teeth toothed length 150mm total length 200mm outside diameter 19mm SKU: 21451700](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-17-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-19mm-sku-21451700/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 16 teeth toothed length 150mm total length 200mm outside diameter 18mm SKU: 21451600](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-16-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-18mm-sku-21451600/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 15 teeth toothed length 150mm total length 200mm outside diameter 17mm SKU: 21451500](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-15-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-17mm-sku-21451500/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 14 teeth toothed length 150mm total length 200mm outside diameter 16mm SKU: 21451400](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-14-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-16mm-sku-21451400/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 13 teeth toothed length 150mm total length 200mm outside diameter 15mm SKU: 21451300](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-13-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-15mm-sku-21451300/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 12 teeth toothed length 150mm total length 200mm outside diameter 14mm SKU: 21451200](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-12-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-14mm-sku-21451200/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Spur gear shaft made from steel with one-sided hub module 1 11 teeth toothed length 150mm total length 200mm outside diameter 13mm SKU: 21451100](https://maedler.in/product/spur-gear-shaft-made-from-steel-with-one-sided-hub-module-1-11-teeth-toothed-length-150mm-total-length-200mm-outside-diameter-13mm-sku-21451100/): Material: C45. With one-sided hub, milled, straight teeth. Pressure angle 20°. - [Clamping plate workpiece without bores material aluminium for timing belt 14M plate dimension: length 228mm x width 150mm SKU: 17766799L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-14m-plate-dimension-length-228mm-x-width-150mm-sku-17766799l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt 14M plate dimension: length 228mm x width 90mm SKU: 17766399L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-14m-plate-dimension-length-228mm-x-width-90mm-sku-17766399l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt 8M plate dimension: length 226mm x width 110mm SKU: 17579900L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-8m-plate-dimension-length-226mm-x-width-110mm-sku-17579900l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt 8M plate dimension: length 226mm x width 55mm SKU: 17539900L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-8m-plate-dimension-length-226mm-x-width-55mm-sku-17539900l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt 5M plate dimension: length 176,8mm x width 45mm SKU: 17359900L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-5m-plate-dimension-length-1768mm-x-width-45mm-sku-17359900l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt 3M plate dimension: length 178mm x width 30mm SKU: 17139900L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-3m-plate-dimension-length-178mm-x-width-30mm-sku-17139900l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt AT10 plate dimension: length 230mm x width 125mm SKU: 16889901L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-at10-plate-dimension-length-230mm-x-width-125mm-sku-16889901l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt AT10 plate dimension: length 230mm x width 60mm SKU: 16889900L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-at10-plate-dimension-length-230mm-x-width-60mm-sku-16889900l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt AT5 plate dimension: length 176,8mm x width 70mm SKU: 16689901L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-at5-plate-dimension-length-1768mm-x-width-70mm-sku-16689901l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt AT5 plate dimension: length 176,8mm x width 45mm SKU: 16689900L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-at5-plate-dimension-length-1768mm-x-width-45mm-sku-16689900l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt T10 plate dimension: length 230mm x width 125mm SKU: 16499901L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-t10-plate-dimension-length-230mm-x-width-125mm-sku-16499901l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt T10 plate dimension: length 230mm x width 60mm SKU: 16489900L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-t10-plate-dimension-length-230mm-x-width-60mm-sku-16489900l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt T5 plate dimension: length 176,8mm x width 70mm SKU: 16289901L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-t5-plate-dimension-length-1768mm-x-width-70mm-sku-16289901l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt T5 plate dimension: length 176,8mm x width 45mm SKU: 16289900L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-t5-plate-dimension-length-1768mm-x-width-45mm-sku-16289900l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Clamping plate workpiece without bores material aluminium for timing belt T2,5 plate dimension: length 178mm x width 25mm SKU: 16079900L](https://maedler.in/product/clamping-plate-workpiece-without-bores-material-aluminium-for-timing-belt-t25-plate-dimension-length-178mm-x-width-25mm-sku-16079900l/): Material: Aluminium similar EN AW2017A.The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. See mounting examples on the pdfcatalogue page.Usage: These clamping plate work pieces are used if the standardclamping plates cannot be used for dimensional reason. The clampingplate work pieces have max. production length and optimized width to bemost flexible for customer rework. We would appreciate to quote suchrework on request with shortest delivery time.Reworking: The belt should be engaged with minimum 6 teeth.Maintain the dimension R. The mounting holes must be placed beside thebelt, the belt must not be bored.* Number of complete teeth in the range X x P. - [Flange for timing belt pulley thickness 1.5mm Ø 83 x 76.5 x 64mm stainless steel SKU: 16019343](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-83-x-76-5-x-64mm-stainless-steel-sku-16019343/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 200 x 195 x 181mm stainless steel SKU: 16019342](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-200-x-195-x-181mm-stainless-steel-sku-16019342/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 192 x 187 x 173mm stainless steel SKU: 16019340](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-192-x-187-x-173mm-stainless-steel-sku-16019340/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 184 x 179 x 165mm stainless steel SKU: 16019339](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-184-x-179-x-165mm-stainless-steel-sku-16019339/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 168 x 163 x 149.5mm stainless steel SKU: 16019338](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-168-x-163-x-149-5mm-stainless-steel-sku-16019338/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 158 x 154 x 142mm stainless steel SKU: 16019335](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-158-x-154-x-142mm-stainless-steel-sku-16019335/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 152 x 147.5 x 136mm stainless steel SKU: 16019334](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-152-x-147-5-x-136mm-stainless-steel-sku-16019334/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 148 x 143 x 132mm stainless steel SKU: 16019333](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-148-x-143-x-132mm-stainless-steel-sku-16019333/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 143 x 139 x 127mm stainless steel SKU: 16019331](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-143-x-139-x-127mm-stainless-steel-sku-16019331/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 140 x 134.5 x 123mm stainless steel SKU: 16019330](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-140-x-134-5-x-123mm-stainless-steel-sku-16019330/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 138 x 132 x 112mm stainless steel SKU: 16019329](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-138-x-132-x-112mm-stainless-steel-sku-16019329/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 135 x 130 x 119mm stainless steel SKU: 16019328](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-135-x-130-x-119mm-stainless-steel-sku-16019328/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 127 x 122 x 111mm stainless steel SKU: 16019327](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-127-x-122-x-111mm-stainless-steel-sku-16019327/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 123 x 117.5 x 107mm stainless steel SKU: 16019326](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-123-x-117-5-x-107mm-stainless-steel-sku-16019326/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 119 x 113.5 x 103mm stainless steel SKU: 16019325](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-119-x-113-5-x-103mm-stainless-steel-sku-16019325/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 115 x 110 x 99mm stainless steel SKU: 16019323](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-115-x-110-x-99mm-stainless-steel-sku-16019323/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 111 x 106 x 94mm stainless steel SKU: 16019322](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-111-x-106-x-94mm-stainless-steel-sku-16019322/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 106 x 101 x 90mm stainless steel SKU: 16019321](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-106-x-101-x-90mm-stainless-steel-sku-16019321/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 103 x 97 x 86mm stainless steel SKU: 16019320](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-103-x-97-x-86mm-stainless-steel-sku-16019320/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 98 x 92 x 79.3mm stainless steel SKU: 16019319](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-98-x-92-x-79-3mm-stainless-steel-sku-16019319/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 97 x 93 x 83mm stainless steel SKU: 16019318](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-97-x-93-x-83mm-stainless-steel-sku-16019318/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 93 x 89 x 80mm stainless steel SKU: 16019317](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-93-x-89-x-80mm-stainless-steel-sku-16019317/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [Flange for timing belt pulley thickness 1.5mm Ø 91 x 85.5 x 76mm stainless steel SKU: 16019316](https://maedler.in/product/flange-for-timing-belt-pulley-thickness-1-5mm-o-91-x-85-5-x-76mm-stainless-steel-sku-16019316/): Material: Stainless steel 1.4301.Flanges for timing belt pulleys, for custom-made parts or serial production. For economical reason, normally the flanges are mounted only at the smaller pulley. Often, the flanges get fixed by beading: On a turntable, with a rolling tool, hub material will get shaped over the flange. A beading material overhang of 0.5mm is recommended. Sold by piece. Other sizes are available at short delivery time. - [timing bar HTD 8M 44 teeth length 200mm material aluminium SKU: 17494401](https://maedler.in/product/timing-bar-htd-8m-44-teeth-length-200mm-material-aluminium-sku-17494401/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 44 teeth length 200mm material steel SKU: 17494400](https://maedler.in/product/timing-bar-htd-8m-44-teeth-length-200mm-material-steel-sku-17494400/): Material: Steel. - [timing bar HTD 8M 40 teeth length 200mm material aluminium SKU: 17494001](https://maedler.in/product/timing-bar-htd-8m-40-teeth-length-200mm-material-aluminium-sku-17494001/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 40 teeth length 200mm material steel SKU: 17494000](https://maedler.in/product/timing-bar-htd-8m-40-teeth-length-200mm-material-steel-sku-17494000/): Material: Steel. - [timing bar HTD 8M 38 teeth length 200mm material aluminium SKU: 17493801](https://maedler.in/product/timing-bar-htd-8m-38-teeth-length-200mm-material-aluminium-sku-17493801/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 38 teeth length 200mm material steel SKU: 17493800](https://maedler.in/product/timing-bar-htd-8m-38-teeth-length-200mm-material-steel-sku-17493800/): Material: Steel. - [timing bar HTD 8M 36 teeth length 200mm material aluminium SKU: 17493601](https://maedler.in/product/timing-bar-htd-8m-36-teeth-length-200mm-material-aluminium-sku-17493601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 36 teeth length 200mm material steel SKU: 17493600](https://maedler.in/product/timing-bar-htd-8m-36-teeth-length-200mm-material-steel-sku-17493600/): Material: Steel. - [timing bar HTD 8M 35 teeth length 200mm material aluminium SKU: 17493501](https://maedler.in/product/timing-bar-htd-8m-35-teeth-length-200mm-material-aluminium-sku-17493501/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 35 teeth length 200mm material steel SKU: 17493500](https://maedler.in/product/timing-bar-htd-8m-35-teeth-length-200mm-material-steel-sku-17493500/): Material: Steel. - [timing bar HTD 8M 34 teeth length 200mm material aluminium SKU: 17493401](https://maedler.in/product/timing-bar-htd-8m-34-teeth-length-200mm-material-aluminium-sku-17493401/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 34 teeth length 200mm material steel SKU: 17493400](https://maedler.in/product/timing-bar-htd-8m-34-teeth-length-200mm-material-steel-sku-17493400/): Material: Steel. - [timing bar HTD 8M 32 teeth length 200mm material aluminium SKU: 17493201](https://maedler.in/product/timing-bar-htd-8m-32-teeth-length-200mm-material-aluminium-sku-17493201/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 32 teeth length 200mm material steel SKU: 17493200](https://maedler.in/product/timing-bar-htd-8m-32-teeth-length-200mm-material-steel-sku-17493200/): Material: Steel. - [timing bar HTD 8M 30 teeth length 200mm material aluminium SKU: 17493001](https://maedler.in/product/timing-bar-htd-8m-30-teeth-length-200mm-material-aluminium-sku-17493001/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 30 teeth length 200mm material steel SKU: 17493000](https://maedler.in/product/timing-bar-htd-8m-30-teeth-length-200mm-material-steel-sku-17493000/): Material: Steel. - [timing bar HTD 8M 28 teeth length 200mm material aluminium SKU: 17492801](https://maedler.in/product/timing-bar-htd-8m-28-teeth-length-200mm-material-aluminium-sku-17492801/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 28 teeth length 200mm material steel SKU: 17492800](https://maedler.in/product/timing-bar-htd-8m-28-teeth-length-200mm-material-steel-sku-17492800/): Material: Steel. - [timing bar HTD 8M 26 teeth length 200mm material aluminium SKU: 17492601](https://maedler.in/product/timing-bar-htd-8m-26-teeth-length-200mm-material-aluminium-sku-17492601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 26 teeth length 200mm material steel SKU: 17492600](https://maedler.in/product/timing-bar-htd-8m-26-teeth-length-200mm-material-steel-sku-17492600/): Material: Steel. - [timing bar HTD 8M 25 teeth length 200mm material aluminium SKU: 17492501](https://maedler.in/product/timing-bar-htd-8m-25-teeth-length-200mm-material-aluminium-sku-17492501/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 25 teeth length 200mm material steel SKU: 17492500](https://maedler.in/product/timing-bar-htd-8m-25-teeth-length-200mm-material-steel-sku-17492500/): Material: Steel. - [timing bar HTD 8M 24 teeth length 200mm material aluminium SKU: 17492401](https://maedler.in/product/timing-bar-htd-8m-24-teeth-length-200mm-material-aluminium-sku-17492401/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 24 teeth length 200mm material steel SKU: 17492400](https://maedler.in/product/timing-bar-htd-8m-24-teeth-length-200mm-material-steel-sku-17492400/): Material: Steel. - [timing bar HTD 8M 23 teeth length 200mm material aluminium SKU: 17492301](https://maedler.in/product/timing-bar-htd-8m-23-teeth-length-200mm-material-aluminium-sku-17492301/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 23 teeth length 200mm material steel SKU: 17492300](https://maedler.in/product/timing-bar-htd-8m-23-teeth-length-200mm-material-steel-sku-17492300/): Material: Steel. - [timing bar HTD 8M 22 teeth length 200mm material aluminium SKU: 17492201](https://maedler.in/product/timing-bar-htd-8m-22-teeth-length-200mm-material-aluminium-sku-17492201/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 22 teeth length 200mm material steel SKU: 17492200](https://maedler.in/product/timing-bar-htd-8m-22-teeth-length-200mm-material-steel-sku-17492200/): Material: Steel. - [timing bar HTD 8M 21 teeth length 200mm material aluminium SKU: 17492101](https://maedler.in/product/timing-bar-htd-8m-21-teeth-length-200mm-material-aluminium-sku-17492101/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 21 teeth length 200mm material steel SKU: 17492100](https://maedler.in/product/timing-bar-htd-8m-21-teeth-length-200mm-material-steel-sku-17492100/): Material: Steel. - [timing bar HTD 8M 20 teeth length 200mm material aluminium SKU: 17492001](https://maedler.in/product/timing-bar-htd-8m-20-teeth-length-200mm-material-aluminium-sku-17492001/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 20 teeth length 200mm material steel SKU: 17492000](https://maedler.in/product/timing-bar-htd-8m-20-teeth-length-200mm-material-steel-sku-17492000/): Material: Steel. - [timing bar HTD 8M 19 teeth length 200mm material aluminium SKU: 17491901](https://maedler.in/product/timing-bar-htd-8m-19-teeth-length-200mm-material-aluminium-sku-17491901/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 19 teeth length 200mm material steel SKU: 17491900](https://maedler.in/product/timing-bar-htd-8m-19-teeth-length-200mm-material-steel-sku-17491900/): Material: Steel. - [timing bar HTD 8M 18 teeth length 200mm material aluminium SKU: 17491801](https://maedler.in/product/timing-bar-htd-8m-18-teeth-length-200mm-material-aluminium-sku-17491801/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 18 teeth length 200mm material steel SKU: 17491800](https://maedler.in/product/timing-bar-htd-8m-18-teeth-length-200mm-material-steel-sku-17491800/): Material: Steel. - [timing bar HTD 8M 17 teeth length 200mm material aluminium SKU: 17491701](https://maedler.in/product/timing-bar-htd-8m-17-teeth-length-200mm-material-aluminium-sku-17491701/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 17 teeth length 200mm material steel SKU: 17491700](https://maedler.in/product/timing-bar-htd-8m-17-teeth-length-200mm-material-steel-sku-17491700/): Material: Steel. - [timing bar HTD 8M 16 teeth length 200mm material aluminium SKU: 17491601](https://maedler.in/product/timing-bar-htd-8m-16-teeth-length-200mm-material-aluminium-sku-17491601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 16 teeth length 200mm material steel SKU: 17491600](https://maedler.in/product/timing-bar-htd-8m-16-teeth-length-200mm-material-steel-sku-17491600/): Material: Steel. - [timing bar HTD 8M 15 teeth length 200mm material aluminium SKU: 17491501](https://maedler.in/product/timing-bar-htd-8m-15-teeth-length-200mm-material-aluminium-sku-17491501/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 15 teeth length 200mm material steel SKU: 17491500](https://maedler.in/product/timing-bar-htd-8m-15-teeth-length-200mm-material-steel-sku-17491500/): Material: Steel. - [Timing belt pulley HTD 8M material cast iron 192 teeth for belt width 85mm for taper bush 3525 SKU: 17477596](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-192-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17477596/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 168 teeth for belt width 85mm for taper bush 3525 SKU: 17477584](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-168-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17477584/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 144 teeth for belt width 85mm for taper bush 3525 SKU: 17477572](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-144-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17477572/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 112 teeth for belt width 85mm for taper bush 3020 SKU: 17477556](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-112-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17477556/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 90 teeth for belt width 85mm for taper bush 3020 SKU: 17477545](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-90-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17477545/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material cast iron 80 teeth for belt width 85mm for taper bush 3020 SKU: 17477540](https://maedler.in/product/timing-belt-pulley-htd-8m-material-cast-iron-80-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17477540/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 85mm for taper bush 3020 SKU: 17477536](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17477536/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 85mm for taper bush 2517 SKU: 17477532](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17477532/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 85mm for taper bush 2517 SKU: 17477528](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17477528/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 85mm for taper bush 2517 SKU: 17477524](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17477524/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 85mm for taper bush 2012 SKU: 17477522](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-85mm-for-taper-bush-2012-sku-17477522/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 85mm for taper bush 2012 SKU: 17477520](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-85mm-for-taper-bush-2012-sku-17477520/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 85mm for taper bush 1615 SKU: 17477519](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-85mm-for-taper-bush-1615-sku-17477519/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 85mm for taper bush 1615 SKU: 17477518](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-85mm-for-taper-bush-1615-sku-17477518/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 85mm for taper bush 1615 SKU: 17477517](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-85mm-for-taper-bush-1615-sku-17477517/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 50mm for taper bush 3020 SKU: 17477445](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-50mm-for-taper-bush-3020-sku-17477445/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 50mm for taper bush 3020 SKU: 17477440](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-50mm-for-taper-bush-3020-sku-17477440/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 50mm for taper bush 2517 SKU: 17477436](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-50mm-for-taper-bush-2517-sku-17477436/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 50mm for taper bush 2517 SKU: 17477432](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-50mm-for-taper-bush-2517-sku-17477432/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 50mm for taper bush 2517 SKU: 17477430](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-50mm-for-taper-bush-2517-sku-17477430/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 50mm for taper bush 2517 SKU: 17477428](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-50mm-for-taper-bush-2517-sku-17477428/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 50mm for taper bush 2012 SKU: 17477424](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-50mm-for-taper-bush-2012-sku-17477424/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 50mm for taper bush 2012 SKU: 17477422](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-50mm-for-taper-bush-2012-sku-17477422/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 50mm for taper bush 2012 SKU: 17477420](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-50mm-for-taper-bush-2012-sku-17477420/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 50mm for taper bush 1615 SKU: 17477419](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477419/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 50mm for taper bush 1615 SKU: 17477418](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477418/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 50mm for taper bush 1615 SKU: 17477417](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477417/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 50mm for taper bush 1615 SKU: 17477416](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477416/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 50mm for taper bush 1615 SKU: 17477415](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-50mm-for-taper-bush-1615-sku-17477415/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 50mm for taper bush 1210 SKU: 17477414](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-50mm-for-taper-bush-1210-sku-17477414/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 30mm for taper bush 2517 SKU: 17477245](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477245/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 30mm for taper bush 2517 SKU: 17477240](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477240/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 30mm for taper bush 2517 SKU: 17477236](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477236/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 30mm for taper bush 2517 SKU: 17477232](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477232/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 30mm for taper bush 2517 SKU: 17477230](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-30mm-for-taper-bush-2517-sku-17477230/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 30mm for taper bush 2012 SKU: 17477228](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-30mm-for-taper-bush-2012-sku-17477228/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 30mm for taper bush 2012 SKU: 17477224](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-30mm-for-taper-bush-2012-sku-17477224/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 30mm for taper bush 2012 SKU: 17477222](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-30mm-for-taper-bush-2012-sku-17477222/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 30mm for taper bush 1615 SKU: 17477220](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477220/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 30mm for taper bush 1615 SKU: 17477219](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477219/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 36 teeth for belt width 30mm for taper bush 1615 SKU: 17477218](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-36-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477218/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 34 teeth for belt width 30mm for taper bush 1615 SKU: 17477217](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-34-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477217/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 32 teeth for belt width 30mm for taper bush 1615 SKU: 17477216](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-32-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477216/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 30 teeth for belt width 30mm for taper bush 1615 SKU: 17477215](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-30-teeth-for-belt-width-30mm-for-taper-bush-1615-sku-17477215/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 28 teeth for belt width 30mm for taper bush 1210 SKU: 17477214](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-28-teeth-for-belt-width-30mm-for-taper-bush-1210-sku-17477214/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 26 teeth for belt width 30mm for taper bush 1108 SKU: 17477213](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-26-teeth-for-belt-width-30mm-for-taper-bush-1108-sku-17477213/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 24 teeth for belt width 30mm for taper bush 1108 SKU: 17477212](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-24-teeth-for-belt-width-30mm-for-taper-bush-1108-sku-17477212/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 22 teeth for belt width 30mm for taper bush 1008 SKU: 17477211](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-22-teeth-for-belt-width-30mm-for-taper-bush-1008-sku-17477211/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 90 teeth for belt width 20mm for taper bush 2012 SKU: 17477145](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-90-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477145/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material grey cast iron 80 teeth for belt width 20mm for taper bush 2012 SKU: 17477140](https://maedler.in/product/timing-belt-pulley-htd-8m-material-grey-cast-iron-80-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477140/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 72 teeth for belt width 20mm for taper bush 2012 SKU: 17477136](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-72-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477136/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 64 teeth for belt width 20mm for taper bush 2012 SKU: 17477132](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-64-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477132/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 60 teeth for belt width 20mm for taper bush 2012 SKU: 17477130](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-60-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477130/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 56 teeth for belt width 20mm for taper bush 2012 SKU: 17477128](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-56-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477128/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 48 teeth for belt width 20mm for taper bush 2012 SKU: 17477124](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-48-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477124/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 44 teeth for belt width 20mm for taper bush 2012 SKU: 17477122](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-44-teeth-for-belt-width-20mm-for-taper-bush-2012-sku-17477122/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 40 teeth for belt width 20mm for taper bush 1610 SKU: 17477120](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-40-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477120/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 8M material steel 38 teeth for belt width 20mm for taper bush 1610 SKU: 17477119](https://maedler.in/product/timing-belt-pulley-htd-8m-material-steel-38-teeth-for-belt-width-20mm-for-taper-bush-1610-sku-17477119/): Material: Up to a Teeth Number of 72 phosphated steel, from a Teeth Number of 80 grey cast iron GG25 phosphated.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 60 rpm Md2 = 240 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108003](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-60-rpm-md2-240-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 49 rpm Md2 = 292 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108002](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-49-rpm-md2-292-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 40 rpm Md2 = 360 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108001](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-40-rpm-md2-360-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 359 rpm Md2 = 29 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43107012](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-359-rpm-md2-29-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 290 rpm Md2 = 36 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43107010](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-290-rpm-md2-36-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 219 rpm Md2 = 48 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43107008](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-219-rpm-md2-48-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 148 rpm Md2 = 71 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43107006](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-148-rpm-md2-71-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 107 rpm Md2 = 98 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43107004](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-107-rpm-md2-98-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 85 rpm Md2 = 123 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43107003](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-85-rpm-md2-123-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-431/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 71 rpm Md2 = 146 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43106906](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-71-rpm-md2-146-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 58 rpm Md2 = 152 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43106905](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-58-rpm-md2-152-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 49 rpm Md2 = 215 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43106904](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-49-rpm-md2-215-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 40 rpm Md2 = 261 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43106903](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-40-rpm-md2-261-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.10kW 230/400V 50Hz model B3 n2 = 31 rpm Md2 = 337 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43106901](https://maedler.in/product/helical-geared-motor-nr-i-1-10kw-230-400v-50hz-model-b3-n2-31-rpm-md2-337-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 419 rpm Md2 = 17 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105912](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-419-rpm-md2-17-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 294 rpm Md2 = 24 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105910](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-294-rpm-md2-24-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 205 rpm Md2 = 35 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105908](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-205-rpm-md2-35-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 173 rpm Md2 = 42 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105906](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-173-rpm-md2-42-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 142 rpm Md2 = 50 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105904](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-142-rpm-md2-50-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 110rpm Md2 = 65 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105902](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-110rpm-md2-65-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43105/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 85 rpm Md2 = 85 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105806](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-85-rpm-md2-85-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43105/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 75rpm Md2 = 95 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105805](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-75rpm-md2-95-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-431058/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 66 rpm Md2 = 108 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105804](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-66-rpm-md2-108-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 55 rpm Md2 = 131 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105803](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-55-rpm-md2-131-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 45 rpm Md2 = 158 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105802](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-45-rpm-md2-158-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.75kW 230/400V 50Hz model B3 n2 = 37 rpm Md2 = 194 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43105801](https://maedler.in/product/helical-geared-motor-nr-i-0-75kw-230-400v-50hz-model-b3-n2-37-rpm-md2-194-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 206 rpm Md2 = 25.5 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104811](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-206-rpm-md2-25-5-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 153 rpm Md2 = 34.3 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104808](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-153-rpm-md2-34-3-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 143 rpm Md2 = 36.8 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104807](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-143-rpm-md2-36-8-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 126 rpm Md2 = 41.7 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104806](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-126-rpm-md2-41-7-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 111 rpm Md2 = 47.4 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104805](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-111-rpm-md2-47-4-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 89 rpm Md2 = 59 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104804](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-89-rpm-md2-59-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 69 rpm Md2 = 76.2 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104803](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-69-rpm-md2-76-2-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 58 rpm Md2 = 90.2 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104802](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-58-rpm-md2-90-2-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 55 rpm Md2 = 95.9 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104704](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-55-rpm-md2-95-9-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 46 rpm Md2 = 115 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104703](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-46-rpm-md2-115-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 37 rpm Md2 = 142 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104702](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-37-rpm-md2-142-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 30 rpm Md2 = 177 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104701](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-30-rpm-md2-177-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 26 rpm Md2 = 204 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104602](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-26-rpm-md2-204-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 20 rpm Md2 = 258 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104601](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-20-rpm-md2-258-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 16 rpm Md2 = 327 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104402](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-16-rpm-md2-327-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.55kW 230/400V 50Hz model B3 n2 = 14 rpm Md2 = 372 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43104401](https://maedler.in/product/helical-geared-motor-nr-i-0-55kw-230-400v-50hz-model-b3-n2-14-rpm-md2-372-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 291 rpm Md2 = 12.1 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103817](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-291-rpm-md2-12-1-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 204 rpm Md2 = 17.3 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103815](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-204-rpm-md2-17-3-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 151 rpm Md2 = 23.3 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103812](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-151-rpm-md2-23-3-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 110 rpm Md2 = 32.2 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103809](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-110-rpm-md2-32-2-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 88 rpm Md2 = 40.1 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103808](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-88-rpm-md2-40-1-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 61 rpm Md2 = 58.2 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103806](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-61-rpm-md2-58-2-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 42 rpm Md2 = 84 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103802](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-42-rpm-md2-84-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 34 rpm Md2 = 105 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103801](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-34-rpm-md2-105-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 25 rpm Md2 = 139 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103603](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-25-rpm-md2-139-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 20 rpm Md2 = 176 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103602](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-20-rpm-md2-176-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 16 rpm Md2 = 217 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103601](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-16-rpm-md2-217-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 11 rpm Md2 = 312 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103402](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-11-rpm-md2-312-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.37kW 230/400V 50Hz model B3 n2 = 9.3 rpm Md2 = 381 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43103401](https://maedler.in/product/helical-geared-motor-nr-i-0-37kw-230-400v-50hz-model-b3-n2-9-3-rpm-md2-381-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 419 rpm Md2 = 5.7 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102518](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-419-rpm-md2-5-7-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 294 rpm Md2 = 8.1 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102516](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-294-rpm-md2-8-1-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 205 rpm Md2 = 11.6 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102514](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-205-rpm-md2-11-6-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 152 rpm Md2 = 15.7 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102511](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-152-rpm-md2-15-7-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 110 rpm Md2 = 21.6 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102508](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-110-rpm-md2-21-6-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 89 rpm Md2 = 26.9 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102507](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-89-rpm-md2-26-9-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 61 rpm Md2 = 39 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102505](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-61-rpm-md2-39-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 42 rpm Md2 = 56.4 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102503](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-42-rpm-md2-56-4-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 26 rpm Md2 = 90.6 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102501](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-26-rpm-md2-90-6-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 23 rpm Md2 = 104 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102402](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-23-rpm-md2-104-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.25kW 230/400V 50Hz model B3 n2 = 19 rpm Md2 = 123 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43102401](https://maedler.in/product/helical-geared-motor-nr-i-0-25kw-230-400v-50hz-model-b3-n2-19-rpm-md2-123-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 410 rpm Md2 = 4.2 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101420](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-410-rpm-md2-4-2-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 287 rpm Md2 = 6.0 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101418](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-287-rpm-md2-6-0-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 201 rpm Md2 = 8.6 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101416](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-201-rpm-md2-8-6-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 149 rpm Md2 = 11.5 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101413](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-149-rpm-md2-11-5-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 108 rpm Md2 = 15.9 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101410](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-108-rpm-md2-15-9-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 87 rpm Md2 = 19.8 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101409](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-87-rpm-md2-19-8-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 60 rpm Md2 = 28.7 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101407](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-60-rpm-md2-28-7-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 41 rpm Md2 = 41.5 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101405](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-41-rpm-md2-41-5-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 26 rpm Md2 = 66.6 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101403](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-26-rpm-md2-66-6-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 19 rpm Md2 = 90.7 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101401](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-19-rpm-md2-90-7-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 9.1 rpm Md2 = 188 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101104](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-9-1-rpm-md2-188-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 6.4 rpm Md2 = 270 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101102](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-6-4-rpm-md2-270-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 5.3 rpm Md2 = 325 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101101](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-5-3-rpm-md2-325-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 4.1 rpm Md2 = 421 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101003](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-4-1-rpm-md2-421-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 3.3 rpm Md2 = 523 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101002](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-3-3-rpm-md2-523-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.18kW 230/400V 50Hz model B3 n2 = 2.6 rpm Md2 = 650 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43101001](https://maedler.in/product/helical-geared-motor-nr-i-0-18kw-230-400v-50hz-model-b3-n2-2-6-rpm-md2-650-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 405 rpm Md2 = 2.8 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100323](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-405-rpm-md2-2-8-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 284 rpm Md2 = 4.0 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100321](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-284-rpm-md2-4-0-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 199 rpm Md2 = 5.8 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100319](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-199-rpm-md2-5-8-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 148 rpm Md2 = 7.8 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100316](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-148-rpm-md2-7-8-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 107 rpm Md2 = 10.7 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100313](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-107-rpm-md2-10-7-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 86 rpm Md2 = 13.3 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100312](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-86-rpm-md2-13-3-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 59 rpm Md2 = 19.3 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100310](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-59-rpm-md2-19-3-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 41 rpm Md2 = 28 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100308](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-41-rpm-md2-28-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 26 rpm Md2 = 44.9 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100306](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-26-rpm-md2-44-9-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 19 rpm Md2 = 61.1 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100304](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-19-rpm-md2-61-1-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 10.0 rpm Md2 = 111 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100208](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-10-0-rpm-md2-111-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 8.6 rpm Md2 = 133 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100207](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-8-6-rpm-md2-133-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 7.0 rpm Md2 = 164 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100206](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-7-0-rpm-md2-164-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 5.0 rpm Md2 = 220 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100204](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-5-0-rpm-md2-220-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 0.12kW 230/400V 50Hz model B3 n2 = 3.3 rpm Md2 = 209 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43100201](https://maedler.in/product/helical-geared-motor-nr-i-0-12kw-230-400v-50hz-model-b3-n2-3-3-rpm-md2-209-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Motorcontroller MAE-4Q-5-30 for DC-drives 24V with brushes manual only as pdf file at www.maedler.de SKU: 43046042](https://maedler.in/product/motorcontroller-mae-4q-5-30-for-dc-drives-24v-with-brushes-manual-only-as-pdf-file-at-www-maedler-de-sku-43046042/): For controlling of brushed DC motors, to snap onto the DIN Rail EN 50022. Supply voltage: 18 - 30 V DC. Motor current: 5 A continuous load (15 A peak current). Speed control (external). Reversal of direction of rotation. Adjustable start ramp (external). Overload shut-down, short circuit detection. Dynamic brake. Additional, only at product 430 460 42: Overcurrent limitation (extern) / overcurrent shutdown. Adjustable current monitoring delay. IxR compensation. Speed switching from the set speed to 100% speed. Operation manual only as PDF-file. - [Motorcontroller MAE-MR-5-30 for DC-drives 24V with brushes manual only as pdf file at www.maedler.de SKU: 43046041](https://maedler.in/product/motorcontroller-mae-mr-5-30-for-dc-drives-24v-with-brushes-manual-only-as-pdf-file-at-www-maedler-de-sku-43046041/): For controlling of brushed DC motors, to snap onto the DIN Rail EN 50022. Supply voltage: 18 - 30 V DC. Motor current: 5 A continuous load (15 A peak current). Speed control (external). Reversal of direction of rotation. Adjustable start ramp (external). Overload shut-down, short circuit detection. Dynamic brake. Additional, only at product 430 460 42: Overcurrent limitation (extern) / overcurrent shutdown. Adjustable current monitoring delay. IxR compensation. Speed switching from the set speed to 100% speed. Operation manual only as PDF-file. - [Motorcontroller SFRG 3 for DC-drives with brushes incl. device support SKU: 43046030](https://maedler.in/product/motorcontroller-sfrg-3-for-dc-drives-with-brushes-incl-device-support-sku-43046030/): • Intelligent motor controller with PWM output for speed setting or controlling (option) of brushed DC motors.• Supply voltages: 10 - 36 V DC or 10 - 24 V AC.• Motor current up to 10 A continuous load.• Usable for CANopen.• 5 potential-free switching inputs or 5 voltage input signals 10 - 24 V (switchable per jumpers), 5 setting potentiometers.• 2 counting inputs for hall sensors or encoder.• 2 switching outputs, max. 1.5 A.• 2 zero-voltage relays with changeover contacts.• Output 12V DC max. 0,4 A, e.eg. to supply stop switches.• Ramp function for start / stop.• Motor current monitoring.• pre-programmed functions: Left, right, stop, release.Delivery with device support: Plastic carrier for easy mounting of the motor controller on a rail EN 60715 width 35 mm or at a housing wall. Total heigth of SFRG 3 with carrier, on a DIN rail with height 7.5 mm: 76 mm. Total heigth of SFRG 3 with carrier, at a wall: 60 mm. This carrier is included in delivery of the motor controller. - [Polyurethane timing belt HTD 8M width 100mm 8M-100 open length PAZ = Polyamide fabric on tooth side SKU: 17566801](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-100mm-8m-100-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566801/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 100mm 8M-100 open length with tensile members from steel packed 2 x 50mm SKU: 17566800](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-100mm-8m-100-open-length-with-tensile-members-from-steel-packed-2-x-50mm-sku-17566800/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 85mm 8M-85 open length SKU: 17566700](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-85mm-8m-85-open-length-sku-17566700/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 50mm 8M-50 open length PAZ = Polyamide fabric on tooth side SKU: 17566501](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-50mm-8m-50-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566501/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 50mm 8M-50 open length SKU: 17566500](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-50mm-8m-50-open-length-sku-17566500/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 40mm 8M-40 open length PAZ = Polyamide fabric on tooth side SKU: 17566401](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-40mm-8m-40-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566401/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 40mm 8M-40 open length with tensile members from steel packed 2 x 20mm SKU: 17566400](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-40mm-8m-40-open-length-with-tensile-members-from-steel-packed-2-x-20mm-sku-17566400/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 30mm 8M-30 open length PAZ = Polyamide fabric on tooth side SKU: 17566301](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-30mm-8m-30-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566301/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 30mm 8M-30 open length SKU: 17566300](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-30mm-8m-30-open-length-sku-17566300/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Polyurethane timing belt HTD 8M width 20mm 8M-20 open length PAZ = Polyamide fabric on tooth side SKU: 17566101](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-20mm-8m-20-open-length-paz-polyamide-fabric-on-tooth-side-sku-17566101/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 8M width 20mm 8M-20 open length SKU: 17566100](https://maedler.in/product/polyurethane-timing-belt-htd-8m-width-20mm-8m-20-open-length-sku-17566100/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium HTD 8M belt width 50mm SKU: 17559900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-8m-belt-width-50mm-sku-17559900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 8M width 50mm Lw 2800mm 350 teeth SKU: 17555200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-2800mm-350-teeth-sku-17555200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 2400mm 300 teeth SKU: 17554800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-2400mm-300-teeth-sku-17554800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 2000mm 250 teeth SKU: 17554400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-2000mm-250-teeth-sku-17554400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1800mm 225 teeth SKU: 17554200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1800mm-225-teeth-sku-17554200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1760mm 220 teeth SKU: 17554000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1760mm-220-teeth-sku-17554000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1600mm 200 teeth SKU: 17553700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1600mm-200-teeth-sku-17553700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1440mm 180 teeth SKU: 17553400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1440mm-180-teeth-sku-17553400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1360mm 170 teeth SKU: 17553200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1360mm-170-teeth-sku-17553200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1280mm 160 teeth SKU: 17553000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1280mm-160-teeth-sku-17553000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1200mm 150 teeth SKU: 17552800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1200mm-150-teeth-sku-17552800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1120mm 140 teeth SKU: 17552600](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1120mm-140-teeth-sku-17552600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 1040mm 130 teeth SKU: 17552400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-1040mm-130-teeth-sku-17552400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 960mm 120 teeth SKU: 17552100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-960mm-120-teeth-sku-17552100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 880mm 110 teeth SKU: 17551900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-880mm-110-teeth-sku-17551900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 800mm 100 teeth SKU: 17551700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-800mm-100-teeth-sku-17551700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 720mm 90 teeth SKU: 17551400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-720mm-90-teeth-sku-17551400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 656mm 82 teeth SKU: 17551200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-656mm-82-teeth-sku-17551200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 640mm 80 teeth SKU: 17551100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-640mm-80-teeth-sku-17551100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 600mm 75 teeth SKU: 17550900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-600mm-75-teeth-sku-17550900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 560mm 70 teeth SKU: 17550700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-560mm-70-teeth-sku-17550700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm Lw 480mm 60 teeth SKU: 17550500](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-lw-480mm-60-teeth-sku-17550500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 50mm 8M-50 open length SKU: 17550000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-50mm-8m-50-open-length-sku-17550000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 8M belt width 30mm SKU: 17539900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-8m-belt-width-30mm-sku-17539900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 8M width 30mm Lw 2800mm 350 teeth SKU: 17535200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-2800mm-350-teeth-sku-17535200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 2400mm 300 teeth SKU: 17534800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-2400mm-300-teeth-sku-17534800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 2000mm 250 teeth SKU: 17534400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-2000mm-250-teeth-sku-17534400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1800mm 225 teeth SKU: 17534200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1800mm-225-teeth-sku-17534200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1760mm 220 teeth SKU: 17534000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1760mm-220-teeth-sku-17534000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1600mm 200 teeth SKU: 17533700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1600mm-200-teeth-sku-17533700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1440mm 180 teeth SKU: 17533400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1440mm-180-teeth-sku-17533400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1360mm 170 teeth SKU: 17533200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1360mm-170-teeth-sku-17533200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1280mm 160 teeth SKU: 17533000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1280mm-160-teeth-sku-17533000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1200mm 150 teeth SKU: 17532800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1200mm-150-teeth-sku-17532800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1120mm 140 teeth SKU: 17532600](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1120mm-140-teeth-sku-17532600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 1040mm 130 teeth SKU: 17532400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-1040mm-130-teeth-sku-17532400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 960mm 120 teeth SKU: 17532100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-960mm-120-teeth-sku-17532100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 880mm 110 teeth SKU: 17531900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-880mm-110-teeth-sku-17531900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 800mm 100 teeth SKU: 17531700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-800mm-100-teeth-sku-17531700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 720mm 90 teeth SKU: 17531400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-720mm-90-teeth-sku-17531400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 656mm 82 teeth SKU: 17531200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-656mm-82-teeth-sku-17531200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 640mm 80 teeth SKU: 17531100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-640mm-80-teeth-sku-17531100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 600mm 75 teeth SKU: 17530900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-600mm-75-teeth-sku-17530900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 560mm 70 teeth SKU: 17530700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-560mm-70-teeth-sku-17530700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm Lw 480mm 60 teeth SKU: 17530500](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-lw-480mm-60-teeth-sku-17530500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 30mm 8M-30 open length SKU: 17530000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-30mm-8m-30-open-length-sku-17530000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium HTD 8M belt width 20mm SKU: 17519900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-8m-belt-width-20mm-sku-17519900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 8M width 20mm Lw 2800mm 350 teeth SKU: 17515200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-2800mm-350-teeth-sku-17515200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 2400mm 300 teeth SKU: 17514800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-2400mm-300-teeth-sku-17514800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 2000mm 250 teeth SKU: 17514400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-2000mm-250-teeth-sku-17514400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1800mm 225 teeth SKU: 17514200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1800mm-225-teeth-sku-17514200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1760mm 220 teeth SKU: 17514000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1760mm-220-teeth-sku-17514000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1600mm 200 teeth SKU: 17513700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1600mm-200-teeth-sku-17513700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1440mm 180 teeth SKU: 17513400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1440mm-180-teeth-sku-17513400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1360mm 170 teeth SKU: 17513200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1360mm-170-teeth-sku-17513200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1280mm 160 teeth SKU: 17513000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1280mm-160-teeth-sku-17513000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1200mm 150 teeth SKU: 17512800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1200mm-150-teeth-sku-17512800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1120mm 140 teeth SKU: 17512600](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1120mm-140-teeth-sku-17512600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 1040mm 130 teeth SKU: 17512400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-1040mm-130-teeth-sku-17512400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 960mm 120 teeth SKU: 17512100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-960mm-120-teeth-sku-17512100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 880mm 110 teeth SKU: 17511900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-880mm-110-teeth-sku-17511900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 800mm 100 teeth SKU: 17511700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-800mm-100-teeth-sku-17511700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 720mm 90 teeth SKU: 17511400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-720mm-90-teeth-sku-17511400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 656mm 82 teeth SKU: 17511200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-656mm-82-teeth-sku-17511200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 640mm 80 teeth SKU: 17511100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-640mm-80-teeth-sku-17511100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 600mm 75 teeth SKU: 17510900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-600mm-75-teeth-sku-17510900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 560mm 70 teeth SKU: 17510700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-560mm-70-teeth-sku-17510700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm Lw 480mm 60 teeth SKU: 17510500](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-lw-480mm-60-teeth-sku-17510500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 20mm 8M-20 open length SKU: 17510000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-20mm-8m-20-open-length-sku-17510000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [timing bar HTD 8M 40 teeth length 200mm material 1.4305 SKU: 17499940](https://maedler.in/product/timing-bar-htd-8m-40-teeth-length-200mm-material-1-4305-sku-17499940/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 36 teeth length 200mm material 1.4305 SKU: 17499936](https://maedler.in/product/timing-bar-htd-8m-36-teeth-length-200mm-material-1-4305-sku-17499936/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 32 teeth length 200mm material 1.4305 SKU: 17499932](https://maedler.in/product/timing-bar-htd-8m-32-teeth-length-200mm-material-1-4305-sku-17499932/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 30 teeth length 200mm material 1.4305 SKU: 17499930](https://maedler.in/product/timing-bar-htd-8m-30-teeth-length-200mm-material-1-4305-sku-17499930/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 25 teeth length 200mm material 1.4305 SKU: 17499925](https://maedler.in/product/timing-bar-htd-8m-25-teeth-length-200mm-material-1-4305-sku-17499925/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 24 teeth length 200mm material 1.4305 SKU: 17499924](https://maedler.in/product/timing-bar-htd-8m-24-teeth-length-200mm-material-1-4305-sku-17499924/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 20 teeth length 200mm material 1.4305 SKU: 17499920](https://maedler.in/product/timing-bar-htd-8m-20-teeth-length-200mm-material-1-4305-sku-17499920/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 18 teeth length 200mm material 1.4305 SKU: 17499918](https://maedler.in/product/timing-bar-htd-8m-18-teeth-length-200mm-material-1-4305-sku-17499918/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 16 teeth length 200mm material 1.4305 SKU: 17499916](https://maedler.in/product/timing-bar-htd-8m-16-teeth-length-200mm-material-1-4305-sku-17499916/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 15 teeth length 200mm material 1.4305 SKU: 17499915](https://maedler.in/product/timing-bar-htd-8m-15-teeth-length-200mm-material-1-4305-sku-17499915/): Material: Stainless steel 1.4305 (AISI 303). - [timing bar HTD 8M 72 teeth length 200mm material aluminium SKU: 17497201](https://maedler.in/product/timing-bar-htd-8m-72-teeth-length-200mm-material-aluminium-sku-17497201/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 72 teeth length 200mm material steel SKU: 17497200](https://maedler.in/product/timing-bar-htd-8m-72-teeth-length-200mm-material-steel-sku-17497200/): Material: Steel. - [timing bar HTD 8M 64 teeth length 200mm material aluminium SKU: 17496401](https://maedler.in/product/timing-bar-htd-8m-64-teeth-length-200mm-material-aluminium-sku-17496401/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 64 teeth length 200mm material steel SKU: 17496400](https://maedler.in/product/timing-bar-htd-8m-64-teeth-length-200mm-material-steel-sku-17496400/): Material: Steel. - [timing bar HTD 8M 56 teeth length 200mm material aluminium SKU: 17495601](https://maedler.in/product/timing-bar-htd-8m-56-teeth-length-200mm-material-aluminium-sku-17495601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 56 teeth length 200mm material steel SKU: 17495600](https://maedler.in/product/timing-bar-htd-8m-56-teeth-length-200mm-material-steel-sku-17495600/): Material: Steel. - [timing bar HTD 8M 48 teeth length 200mm material aluminium SKU: 17494801](https://maedler.in/product/timing-bar-htd-8m-48-teeth-length-200mm-material-aluminium-sku-17494801/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 48 teeth length 200mm material steel SKU: 17494800](https://maedler.in/product/timing-bar-htd-8m-48-teeth-length-200mm-material-steel-sku-17494800/): Material: Steel. - [timing bar HTD 8M 46 teeth length 200mm material aluminium SKU: 17494601](https://maedler.in/product/timing-bar-htd-8m-46-teeth-length-200mm-material-aluminium-sku-17494601/): Material: Aluminium similar EN AW2017A. - [timing bar HTD 8M 46 teeth length 200mm material steel SKU: 17494600](https://maedler.in/product/timing-bar-htd-8m-46-teeth-length-200mm-material-steel-sku-17494600/): Material: Steel. - [Locking assembly SIG stainless steel 1.4301 bore 30mm SKU: 61513000](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-30mm-sku-61513000/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 28mm SKU: 61512800](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-28mm-sku-61512800/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 25mm SKU: 61512500](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-25mm-sku-61512500/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 24mm SKU: 61512400](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-24mm-sku-61512400/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 22mm SKU: 61512200](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-22mm-sku-61512200/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 20mm SKU: 61512000](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-20mm-sku-61512000/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 19mm SKU: 61511900](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-19mm-sku-61511900/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 18mm SKU: 61511800](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-18mm-sku-61511800/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 17mm SKU: 61511700](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-17mm-sku-61511700/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 16mm SKU: 61511600](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-16mm-sku-61511600/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 15,875mm SKU: 61511588](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-15875mm-sku-61511588/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 15mm SKU: 61511500](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-15mm-sku-61511500/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 14mm SKU: 61511400](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-14mm-sku-61511400/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 12mm SKU: 61511200](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-12mm-sku-61511200/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 11mm SKU: 61511100](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-11mm-sku-61511100/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 10mm SKU: 61511000](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-10mm-sku-61511000/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 9,52mm SKU: 61510952](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-952mm-sku-61510952/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 9mm SKU: 61510900](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-9mm-sku-61510900/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 8mm SKU: 61510800](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-8mm-sku-61510800/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 7mm SKU: 61510700](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-7mm-sku-61510700/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 6,35mm SKU: 61510635](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-635mm-sku-61510635/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 6mm SKU: 61510600](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-6mm-sku-61510600/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 5mm SKU: 61510500](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-5mm-sku-61510500/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 4mm SKU: 61510400](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-4mm-sku-61510400/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 3mm SKU: 61510300](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-3mm-sku-61510300/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Clamping bush MSA bore 50mm SKU: 61505000](https://maedler.in/product/clamping-bush-msa-bore-50mm-sku-61505000/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 48mm SKU: 61504800](https://maedler.in/product/clamping-bush-msa-bore-48mm-sku-61504800/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 45mm SKU: 61504500](https://maedler.in/product/clamping-bush-msa-bore-45mm-sku-61504500/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 42mm SKU: 61504200](https://maedler.in/product/clamping-bush-msa-bore-42mm-sku-61504200/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 40mm SKU: 61504000](https://maedler.in/product/clamping-bush-msa-bore-40mm-sku-61504000/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 38mm SKU: 61503800](https://maedler.in/product/clamping-bush-msa-bore-38mm-sku-61503800/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 35mm SKU: 61503500](https://maedler.in/product/clamping-bush-msa-bore-35mm-sku-61503500/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 32mm SKU: 61503200](https://maedler.in/product/clamping-bush-msa-bore-32mm-sku-61503200/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 30mm SKU: 61503000](https://maedler.in/product/clamping-bush-msa-bore-30mm-sku-61503000/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 28mm SKU: 61502800](https://maedler.in/product/clamping-bush-msa-bore-28mm-sku-61502800/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 25mm SKU: 61502500](https://maedler.in/product/clamping-bush-msa-bore-25mm-sku-61502500/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 24mm SKU: 61502400](https://maedler.in/product/clamping-bush-msa-bore-24mm-sku-61502400/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 22mm SKU: 61502200](https://maedler.in/product/clamping-bush-msa-bore-22mm-sku-61502200/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 20mm SKU: 61502000](https://maedler.in/product/clamping-bush-msa-bore-20mm-sku-61502000/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Clamping bush MSA bore 19mm SKU: 61501900](https://maedler.in/product/clamping-bush-msa-bore-19mm-sku-61501900/): Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub. - [Locking assembly COM-R bore 120mm size 120x134x21mm (2 loose rings) SKU: 61500120](https://maedler.in/product/locking-assembly-com-r-bore-120mm-size-120x134x21mm-2-loose-rings-sku-61500120/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 110mm size 110x124x21mm (2 loose rings) SKU: 61500110](https://maedler.in/product/locking-assembly-com-r-bore-110mm-size-110x124x21mm-2-loose-rings-sku-61500110/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 100mm size 100x114x21mm (2 loose rings) SKU: 61500100](https://maedler.in/product/locking-assembly-com-r-bore-100mm-size-100x114x21mm-2-loose-rings-sku-61500100/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 95mm size 95x106x17mm (2 loose rings) SKU: 61500095](https://maedler.in/product/locking-assembly-com-r-bore-95mm-size-95x106x17mm-2-loose-rings-sku-61500095/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 90mm size 90x101x17mm (2 loose rings) SKU: 61500090](https://maedler.in/product/locking-assembly-com-r-bore-90mm-size-90x101x17mm-2-loose-rings-sku-61500090/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 85mm size 85x96x17mm (2 loose rings) SKU: 61500085](https://maedler.in/product/locking-assembly-com-r-bore-85mm-size-85x96x17mm-2-loose-rings-sku-61500085/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 80mm size 80x91x17mm (2 loose rings) SKU: 61500080](https://maedler.in/product/locking-assembly-com-r-bore-80mm-size-80x91x17mm-2-loose-rings-sku-61500080/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 75mm size 75x84x14mm (2 loose rings) SKU: 61500075](https://maedler.in/product/locking-assembly-com-r-bore-75mm-size-75x84x14mm-2-loose-rings-sku-61500075/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 70mm size 70x79x14mm (2 loose rings) SKU: 61500070](https://maedler.in/product/locking-assembly-com-r-bore-70mm-size-70x79x14mm-2-loose-rings-sku-61500070/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 65mm size 65x73x12mm (2 loose rings) SKU: 61500065](https://maedler.in/product/locking-assembly-com-r-bore-65mm-size-65x73x12mm-2-loose-rings-sku-61500065/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 60mm size 60x68x12mm (2 loose rings) SKU: 61500060](https://maedler.in/product/locking-assembly-com-r-bore-60mm-size-60x68x12mm-2-loose-rings-sku-61500060/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 55mm size 55x62x10mm (2 loose rings) SKU: 61500055](https://maedler.in/product/locking-assembly-com-r-bore-55mm-size-55x62x10mm-2-loose-rings-sku-61500055/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 50mm size 50x57x10mm (2 loose rings) SKU: 61500050](https://maedler.in/product/locking-assembly-com-r-bore-50mm-size-50x57x10mm-2-loose-rings-sku-61500050/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 48mm size 48x55x10mm (2 loose rings) SKU: 61500048](https://maedler.in/product/locking-assembly-com-r-bore-48mm-size-48x55x10mm-2-loose-rings-sku-61500048/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 45mm size 45x52x10mm (2 loose rings) SKU: 61500045](https://maedler.in/product/locking-assembly-com-r-bore-45mm-size-45x52x10mm-2-loose-rings-sku-61500045/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 42mm size 42x48x8.0mm (2 loose rings) SKU: 61500042](https://maedler.in/product/locking-assembly-com-r-bore-42mm-size-42x48x8-0mm-2-loose-rings-sku-61500042/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 40mm size 40x45x8.0mm (2 loose rings) SKU: 61500040](https://maedler.in/product/locking-assembly-com-r-bore-40mm-size-40x45x8-0mm-2-loose-rings-sku-61500040/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 38mm size 38x44x7.0mm (2 loose rings) SKU: 61500038](https://maedler.in/product/locking-assembly-com-r-bore-38mm-size-38x44x7-0mm-2-loose-rings-sku-61500038/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 35mm size 35x40x7.0mm (2 loose rings) SKU: 61500035](https://maedler.in/product/locking-assembly-com-r-bore-35mm-size-35x40x7-0mm-2-loose-rings-sku-61500035/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 32mm size 32x36x6.3mm (2 loose rings) SKU: 61500032](https://maedler.in/product/locking-assembly-com-r-bore-32mm-size-32x36x6-3mm-2-loose-rings-sku-61500032/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 30mm size 30x35x6.3mm (2 loose rings) SKU: 61500030](https://maedler.in/product/locking-assembly-com-r-bore-30mm-size-30x35x6-3mm-2-loose-rings-sku-61500030/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 28mm size 28x32x6.3mm (2 loose rings) SKU: 61500028](https://maedler.in/product/locking-assembly-com-r-bore-28mm-size-28x32x6-3mm-2-loose-rings-sku-61500028/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 25mm size 25x30x6.3mm (2 loose rings) SKU: 61500025](https://maedler.in/product/locking-assembly-com-r-bore-25mm-size-25x30x6-3mm-2-loose-rings-sku-61500025/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 24mm size 24x28x6.3mm (2 loose rings) SKU: 61500024](https://maedler.in/product/locking-assembly-com-r-bore-24mm-size-24x28x6-3mm-2-loose-rings-sku-61500024/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 22mm size 22x26x6.3mm (2 loose rings) SKU: 61500022](https://maedler.in/product/locking-assembly-com-r-bore-22mm-size-22x26x6-3mm-2-loose-rings-sku-61500022/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 20mm size 20x25x6.3mm (2 loose rings) SKU: 61500020](https://maedler.in/product/locking-assembly-com-r-bore-20mm-size-20x25x6-3mm-2-loose-rings-sku-61500020/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 19mm size 19x24x6.3mm (2 loose rings) SKU: 61500019](https://maedler.in/product/locking-assembly-com-r-bore-19mm-size-19x24x6-3mm-2-loose-rings-sku-61500019/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 18mm size 18x22x6.3mm (2 loose rings) SKU: 61500018](https://maedler.in/product/locking-assembly-com-r-bore-18mm-size-18x22x6-3mm-2-loose-rings-sku-61500018/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 17mm size 17x21x6.3mm (2 loose rings) SKU: 61500017](https://maedler.in/product/locking-assembly-com-r-bore-17mm-size-17x21x6-3mm-2-loose-rings-sku-61500017/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 16mm size 16x20x6.3mm (2 loose rings) SKU: 61500016](https://maedler.in/product/locking-assembly-com-r-bore-16mm-size-16x20x6-3mm-2-loose-rings-sku-61500016/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 15mm size 15x19x6.3mm (2 loose rings) SKU: 61500015](https://maedler.in/product/locking-assembly-com-r-bore-15mm-size-15x19x6-3mm-2-loose-rings-sku-61500015/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 14mm size 14x18x6.3mm (2 loose rings) SKU: 61500014](https://maedler.in/product/locking-assembly-com-r-bore-14mm-size-14x18x6-3mm-2-loose-rings-sku-61500014/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 12mm size 12x15x4.5mm (2 loose rings) SKU: 61500012](https://maedler.in/product/locking-assembly-com-r-bore-12mm-size-12x15x4-5mm-2-loose-rings-sku-61500012/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 10mm size 10x13x4.5mm (2 loose rings) SKU: 61500010](https://maedler.in/product/locking-assembly-com-r-bore-10mm-size-10x13x4-5mm-2-loose-rings-sku-61500010/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 9mm size 9x12x4.5mm (2 loose rings) SKU: 61500009](https://maedler.in/product/locking-assembly-com-r-bore-9mm-size-9x12x4-5mm-2-loose-rings-sku-61500009/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 8mm size 8x11x4.5mm (2 loose rings) SKU: 61500008](https://maedler.in/product/locking-assembly-com-r-bore-8mm-size-8x11x4-5mm-2-loose-rings-sku-61500008/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 7mm size 7x10x4.5mm (2 loose rings) SKU: 61500007](https://maedler.in/product/locking-assembly-com-r-bore-7mm-size-7x10x4-5mm-2-loose-rings-sku-61500007/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Locking assembly COM-R bore 6mm size 6x9x4.5mm (2 loose rings) SKU: 61500006](https://maedler.in/product/locking-assembly-com-r-bore-6mm-size-6x9x4-5mm-2-loose-rings-sku-61500006/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For lower to medium torques.Not self-centering.Loose clamping rings. For use with customer¿s pressure sleeves and customer¿s screws.Up to 4 clamping sets can be used in line.Versatile usage, for customized solutions.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=500mm for 270,000Nm are available.Price and delivery time on request. - [Elastic coupling PU both sides bore 10mm hubs made from stainless steel SKU: 60399202](https://maedler.in/product/elastic-coupling-pu-both-sides-bore-10mm-hubs-made-from-stainless-steel-sku-60399202/): Material: polyester, hubs stainless steel 1.4305 (AISI 303). These torsionally-stiff couplings made in one-part from flexible plastic are easily mounted. They show very good chemical resistance against acids, bases, solvents, greases and oils. They have a very high tear resistance, are highly flexible at low temperatures, have good shock and vibration damping properties and are corrosion resistant. Max. speed: 3.000 tr/min. Temperature range: -40°C to +100°C. 1) max. torque at max. shaft misalignment 2) max. torque at a shaft misalignment of 1° Angular, 2 mm axial and 0,5 mm radial. - [Frequency inverter NES1 3-phase up to nominal motor power 2.2 kW supply voltage 3 x 400V with operator panel mounted SKU: 46013220](https://maedler.in/product/frequency-inverter-nes1-3-phase-up-to-nominal-motor-power-2-2-kw-supply-voltage-3-x-400v-with-operator-panel-mounted-sku-46013220/): Frequency Inverters NES1 from brand manufacturer Hitachi, for controlling and speed setting of 3-phase motors. Main features of this series are easy parametrisation, a clearly arranged control panel and easy operation. The automatic energy saving function adapts voltage and current to the motor´s load conditions for minimizing energy consumption. Delivery including mounted operating panel NES1-OP with LED display. - [Frequency inverter NES1 3-phase up to nominal motor power 1.5 kW supply voltage 3 x 400V with operator panel mounted SKU: 46013150](https://maedler.in/product/frequency-inverter-nes1-3-phase-up-to-nominal-motor-power-1-5-kw-supply-voltage-3-x-400v-with-operator-panel-mounted-sku-46013150/): Frequency Inverters NES1 from brand manufacturer Hitachi, for controlling and speed setting of 3-phase motors. Main features of this series are easy parametrisation, a clearly arranged control panel and easy operation. The automatic energy saving function adapts voltage and current to the motor´s load conditions for minimizing energy consumption. Delivery including mounted operating panel NES1-OP with LED display. - [Frequency inverter NES1 3-phase up to nominal motor power 0.75 kW supply voltage 3 x 400V with operator panel mounted SKU: 46013075](https://maedler.in/product/frequency-inverter-nes1-3-phase-up-to-nominal-motor-power-0-75-kw-supply-voltage-3-x-400v-with-operator-panel-mounted-sku-46013075/): Frequency Inverters NES1 from brand manufacturer Hitachi, for controlling and speed setting of 3-phase motors. Main features of this series are easy parametrisation, a clearly arranged control panel and easy operation. The automatic energy saving function adapts voltage and current to the motor´s load conditions for minimizing energy consumption. Delivery including mounted operating panel NES1-OP with LED display. - [Frequency inverter NES1 1-phase up to nominal motor power 2.2 kW supply voltage 1 x 230V with operator panel mounted SKU: 46011220](https://maedler.in/product/frequency-inverter-nes1-1-phase-up-to-nominal-motor-power-2-2-kw-supply-voltage-1-x-230v-with-operator-panel-mounted-sku-46011220/): Frequency Inverters NES1 from brand manufacturer Hitachi, for controlling and speed setting of 3-phase motors. Main features of this series are easy parametrisation, a clearly arranged control panel and easy operation. The automatic energy saving function adapts voltage and current to the motor´s load conditions for minimizing energy consumption. Delivery including mounted operating panel NES1-OP with LED display. - [Frequency inverter NES1 1-phase up to nominal motor power 1.5 kW supply voltage 1 x 230V with operator panel mounted SKU: 46011150](https://maedler.in/product/frequency-inverter-nes1-1-phase-up-to-nominal-motor-power-1-5-kw-supply-voltage-1-x-230v-with-operator-panel-mounted-sku-46011150/): Frequency Inverters NES1 from brand manufacturer Hitachi, for controlling and speed setting of 3-phase motors. Main features of this series are easy parametrisation, a clearly arranged control panel and easy operation. The automatic energy saving function adapts voltage and current to the motor´s load conditions for minimizing energy consumption. Delivery including mounted operating panel NES1-OP with LED display. - [Frequency inverter NES1 1-phase up to nominal motor power 0.75 kW supply voltage 1 x 230V with operator panel mounted SKU: 46011075](https://maedler.in/product/frequency-inverter-nes1-1-phase-up-to-nominal-motor-power-0-75-kw-supply-voltage-1-x-230v-with-operator-panel-mounted-sku-46011075/): Frequency Inverters NES1 from brand manufacturer Hitachi, for controlling and speed setting of 3-phase motors. Main features of this series are easy parametrisation, a clearly arranged control panel and easy operation. The automatic energy saving function adapts voltage and current to the motor´s load conditions for minimizing energy consumption. Delivery including mounted operating panel NES1-OP with LED display. - [Frequency inverter NES1 1-phase up to nominal motor power 0.37 kW supply voltage 1 x 230V with operator panel mounted SKU: 46011037](https://maedler.in/product/frequency-inverter-nes1-1-phase-up-to-nominal-motor-power-0-37-kw-supply-voltage-1-x-230v-with-operator-panel-mounted-sku-46011037/): Frequency Inverters NES1 from brand manufacturer Hitachi, for controlling and speed setting of 3-phase motors. Main features of this series are easy parametrisation, a clearly arranged control panel and easy operation. The automatic energy saving function adapts voltage and current to the motor´s load conditions for minimizing energy consumption. Delivery including mounted operating panel NES1-OP with LED display. - [Frequency inverter NES1 1-phase up to nominal motor power 0.25 kW supply voltage 1 x 230V with operator panel mounted SKU: 46011025](https://maedler.in/product/frequency-inverter-nes1-1-phase-up-to-nominal-motor-power-0-25-kw-supply-voltage-1-x-230v-with-operator-panel-mounted-sku-46011025/): Frequency Inverters NES1 from brand manufacturer Hitachi, for controlling and speed setting of 3-phase motors. Main features of this series are easy parametrisation, a clearly arranged control panel and easy operation. The automatic energy saving function adapts voltage and current to the motor´s load conditions for minimizing energy consumption. Delivery including mounted operating panel NES1-OP with LED display. - [Operating capacitor KST 25µF 400V SKU: 43636300](https://maedler.in/product/operating-capacitor-kst-25%c2%b5f-400v-sku-43636300/): Aluminium housing, metal-polypropylene. For 30.000 operating hours. According to VDE to 25µF. The capacitors have a protective cap made from aluminium and a 180mm cable connected on the side. On the bottom there is a mounting screw with toothed lock washer and nut. Technical Data: Capacity tolerance ±10%. Frequency 50 to 60 Hz. Voltage 400 V. Loss < 0.3%. Temperature range -25 to +85°C. Insulation test voltage (2 Sec.) 2.5 kV (to ground). - [Operating capacitor KST 20µF 400V SKU: 43636200](https://maedler.in/product/operating-capacitor-kst-20%c2%b5f-400v-sku-43636200/): Aluminium housing, metal-polypropylene. For 30.000 operating hours. According to VDE to 25µF. The capacitors have a protective cap made from aluminium and a 180mm cable connected on the side. On the bottom there is a mounting screw with toothed lock washer and nut. Technical Data: Capacity tolerance ±10%. Frequency 50 to 60 Hz. Voltage 400 V. Loss < 0.3%. Temperature range -25 to +85°C. Insulation test voltage (2 Sec.) 2.5 kV (to ground). - [Operating capacitor KST 16.0µF 400V SKU: 43636100](https://maedler.in/product/operating-capacitor-kst-16-0%c2%b5f-400v-sku-43636100/): Aluminium housing, metal-polypropylene. For 30.000 operating hours. According to VDE to 25µF. The capacitors have a protective cap made from aluminium and a 180mm cable connected on the side. On the bottom there is a mounting screw with toothed lock washer and nut. Technical Data: Capacity tolerance ±10%. Frequency 50 to 60 Hz. Voltage 400 V. Loss < 0.3%. Temperature range -25 to +85°C. Insulation test voltage (2 Sec.) 2.5 kV (to ground). - [Operating capacitor KST 10.0µF 400V SKU: 43635900](https://maedler.in/product/operating-capacitor-kst-10-0%c2%b5f-400v-sku-43635900/): Aluminium housing, metal-polypropylene. For 30.000 operating hours. According to VDE to 25µF. The capacitors have a protective cap made from aluminium and a 180mm cable connected on the side. On the bottom there is a mounting screw with toothed lock washer and nut. Technical Data: Capacity tolerance ±10%. Frequency 50 to 60 Hz. Voltage 400 V. Loss < 0.3%. Temperature range -25 to +85°C. Insulation test voltage (2 Sec.) 2.5 kV (to ground). - [Operating capacitor KST 5.0µF 400V SKU: 43635600](https://maedler.in/product/operating-capacitor-kst-5-0%c2%b5f-400v-sku-43635600/): Aluminium housing, metal-polypropylene. For 30.000 operating hours. According to VDE to 25µF. The capacitors have a protective cap made from aluminium and a 180mm cable connected on the side. On the bottom there is a mounting screw with toothed lock washer and nut. Technical Data: Capacity tolerance ±10%. Frequency 50 to 60 Hz. Voltage 400 V. Loss < 0.3%. Temperature range -25 to +85°C. Insulation test voltage (2 Sec.) 2.5 kV (to ground). - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 417 rpm Md2 = 34 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108111](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-417-rpm-md2-34-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 356 rpm Md2 = 40 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108110](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-356-rpm-md2-40-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 287 rpm Md2 = 50 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108108](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-287-rpm-md2-50-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 217 rpm Md2 = 66 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108106](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-217-rpm-md2-66-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 147 rpm Md2 = 98 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108104](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-147-rpm-md2-98-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 106 rpm Md2 = 136 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108102](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-106-rpm-md2-136-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-431/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 85 rpm Md2 = 169 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108101](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-85-rpm-md2-169-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Helical geared motor NR/I 1.50kW 230/400V 50Hz model B3 n2 = 71 rpm Md2 = 203 Nm IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43108004](https://maedler.in/product/helical-geared-motor-nr-i-1-50kw-230-400v-50hz-model-b3-n2-71-rpm-md2-203-nm-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4310/): Housing: One-part, torsion-resistant block-shaped housing made from grey cast iron type GG25 or GGG40. Color RAL 7031 blue grey. The high tor- sional stiffness helps to achieve an optimum production accura- cy, leading to low noise and thus a longer service life. Gearing: The helical gearwheels are produced from forged blanks, the gears are case hardened and ground or scraped. The calculations were carried out according to DIN 3990. Bearing system: Generously dimensioned roller bearings. Shafts: Ø according to ISO k6. Feather key groove according to DIN 6885/1. Centering points with threads according to DIN 332/2. Lubrication: The gear boxes are delivered filled with the correct level of oil or grease, which offers sufficient lubrication for about 10,000 operating hours, or for an operation period of 2 years, at a temperature of -5°C to +40°C. When changing the lubricant, always clean the gearbox thoroughly. Motor: 230/400 V, 50 Hz, operation mode S1, IP 55, insulation class 'F', temperature limit +80°C at max. ambient temperature of 40°C. From 0.75 kW with motor protection: thermistor 3 x 155°C. Energy efficiency class IE3. Gearbox with higher power, other speeds, fitted brake motors explosion-proof or dual-speed motors and other models on request. * Max. output torque at fB = 0.8. - [Neoprene timing belt HTD 14M width 85mm Lw 1610mm 115 teeth SKU: 17751700](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1610mm-115-teeth-sku-17751700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 1400mm 100 teeth SKU: 17751400](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1400mm-100-teeth-sku-17751400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 1190mm 85 teeth SKU: 17751100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1190mm-85-teeth-sku-17751100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 966mm 69 teeth SKU: 17750800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-966mm-69-teeth-sku-17750800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 4578mm 327 teeth SKU: 17735100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-4578mm-327-teeth-sku-17735100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 4326mm 309 teeth SKU: 17734800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-4326mm-309-teeth-sku-17734800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 3850mm 275 teeth SKU: 17734500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-3850mm-275-teeth-sku-17734500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 3500mm 250 teeth SKU: 17734200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-3500mm-250-teeth-sku-17734200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 3150mm 225 teeth SKU: 17733900](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-3150mm-225-teeth-sku-17733900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2800mm 200 teeth SKU: 17733600](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2800mm-200-teeth-sku-17733600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2590mm 185 teeth SKU: 17733200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2590mm-185-teeth-sku-17733200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2450mm 175 teeth SKU: 17733000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2450mm-175-teeth-sku-17733000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2310mm 165 teeth SKU: 17732800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2310mm-165-teeth-sku-17732800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 2100mm 150 teeth SKU: 17732500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-2100mm-150-teeth-sku-17732500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1890mm 135 teeth SKU: 17732200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1890mm-135-teeth-sku-17732200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1778mm 127 teeth SKU: 17732000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1778mm-127-teeth-sku-17732000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1610mm 115 teeth SKU: 17731700](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1610mm-115-teeth-sku-17731700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1400mm 100 teeth SKU: 17731400](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1400mm-100-teeth-sku-17731400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 1190mm 85 teeth SKU: 17731100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-1190mm-85-teeth-sku-17731100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 55mm Lw 966mm 69 teeth SKU: 17730800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-55mm-lw-966mm-69-teeth-sku-17730800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 4578mm 327 teeth SKU: 17715100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-4578mm-327-teeth-sku-17715100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 4326mm 309 teeth SKU: 17714800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-4326mm-309-teeth-sku-17714800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 3850mm 275 teeth SKU: 17714500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-3850mm-275-teeth-sku-17714500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 3500mm 250 teeth SKU: 17714200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-3500mm-250-teeth-sku-17714200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 3150mm 225 teeth SKU: 17713900](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-3150mm-225-teeth-sku-17713900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2800mm 200 teeth SKU: 17713600](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2800mm-200-teeth-sku-17713600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2590mm 185 teeth SKU: 17713200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2590mm-185-teeth-sku-17713200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2450mm 175 teeth SKU: 17713000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2450mm-175-teeth-sku-17713000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2310mm 165 teeth SKU: 17712800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2310mm-165-teeth-sku-17712800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 2100mm 150 teeth SKU: 17712500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-2100mm-150-teeth-sku-17712500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1890mm 135 teeth SKU: 17712200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1890mm-135-teeth-sku-17712200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1778mm 127 teeth SKU: 17712000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1778mm-127-teeth-sku-17712000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1610mm 115 teeth SKU: 17711700](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1610mm-115-teeth-sku-17711700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1400mm 100 teeth SKU: 17711400](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1400mm-100-teeth-sku-17711400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 1190mm 85 teeth SKU: 17711100](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-1190mm-85-teeth-sku-17711100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 40mm Lw 966mm 69 teeth SKU: 17710800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-40mm-lw-966mm-69-teeth-sku-17710800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 85mm for taper bush 3525 SKU: 17677345](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-90-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677345/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 80 teeth for belt width 85mm for taper bush 3525 SKU: 17677340](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-80-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677340/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 72 teeth for belt width 85mm for taper bush 3525 SKU: 17677336](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-72-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677336/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 64 teeth for belt width 85mm for taper bush 3525 SKU: 17677332](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-64-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677332/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 56 teeth for belt width 85mm for taper bush 3525 SKU: 17677328](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-56-teeth-for-belt-width-85mm-for-taper-bush-3525-sku-17677328/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 48 teeth for belt width 85mm for taper bush 3030 SKU: 17677324](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-48-teeth-for-belt-width-85mm-for-taper-bush-3030-sku-17677324/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 44 teeth for belt width 85mm for taper bush 3030 SKU: 17677322](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-44-teeth-for-belt-width-85mm-for-taper-bush-3030-sku-17677322/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 40 teeth for belt width 85mm for taper bush 3020 SKU: 17677320](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-40-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17677320/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 38 teeth for belt width 85mm for taper bush 3020 SKU: 17677319](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-38-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17677319/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 36 teeth for belt width 85mm for taper bush 3020 SKU: 17677318](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-36-teeth-for-belt-width-85mm-for-taper-bush-3020-sku-17677318/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 34 teeth for belt width 85mm for taper bush 2517 SKU: 17677317](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-34-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17677317/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 32 teeth for belt width 85mm for taper bush 2517 SKU: 17677316](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-32-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17677316/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 30 teeth for belt width 85mm for taper bush 2517 SKU: 17677315](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-30-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17677315/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 28 teeth for belt width 85mm for taper bush 2517 SKU: 17677314](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-28-teeth-for-belt-width-85mm-for-taper-bush-2517-sku-17677314/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 55mm for taper bush 3020 SKU: 17677245](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-90-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677245/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 80 teeth for belt width 55mm for taper bush 3020 SKU: 17677240](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-80-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677240/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 72 teeth for belt width 55mm for taper bush 3020 SKU: 17677236](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-72-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677236/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 64 teeth for belt width 55mm for taper bush 3020 SKU: 17677232](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-64-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677232/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 56 teeth for belt width 55mm for taper bush 3020 SKU: 17677228](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-56-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677228/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 48 teeth for belt width 55mm for taper bush 3020 SKU: 17677224](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-48-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677224/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 44 teeth for belt width 55mm for taper bush 3020 SKU: 17677222](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-44-teeth-for-belt-width-55mm-for-taper-bush-3020-sku-17677222/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 40 teeth for belt width 55mm for taper bush 2517 SKU: 17677220](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-40-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677220/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 38 teeth for belt width 55mm for taper bush 2517 SKU: 17677219](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-38-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677219/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 36 teeth for belt width 55mm for taper bush 2517 SKU: 17677218](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-36-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677218/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 34 teeth for belt width 55mm for taper bush 2517 SKU: 17677217](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-34-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677217/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 32 teeth for belt width 55mm for taper bush 2517 SKU: 17677216](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-32-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677216/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 30 teeth for belt width 55mm for taper bush 2517 SKU: 17677215](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-30-teeth-for-belt-width-55mm-for-taper-bush-2517-sku-17677215/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 28 teeth for belt width 55mm for taper bush 2012 SKU: 17677214](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-28-teeth-for-belt-width-55mm-for-taper-bush-2012-sku-17677214/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 90 teeth for belt width 40mm for taper bush 3020 SKU: 17677145](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-90-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677145/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron, 80 teeth for belt width 40mm for taper bush 3020 SKU: 17677140](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-80-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677140/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material grey cast iron 72 teeth for belt width 40mm for taper bush 3020 SKU: 17677136](https://maedler.in/product/timing-belt-pulley-htd-14m-material-grey-cast-iron-72-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677136/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 56 teeth for belt width 40mm for taper bush 3020 SKU: 17677128](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-56-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677128/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 48 teeth for belt width 40mm for taper bush 3020 SKU: 17677124](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-48-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677124/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 44 teeth for belt width 40mm for taper bush 3020 SKU: 17677122](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-44-teeth-for-belt-width-40mm-for-taper-bush-3020-sku-17677122/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 40 teeth for belt width 40mm for taper bush 2517 SKU: 17677120](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-40-teeth-for-belt-width-40mm-for-taper-bush-2517-sku-17677120/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 38 teeth for belt width 40mm for taper bush 2517 SKU: 17677119](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-38-teeth-for-belt-width-40mm-for-taper-bush-2517-sku-17677119/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 36 teeth for belt width 40mm for taper bush 2517 SKU: 17677118](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-36-teeth-for-belt-width-40mm-for-taper-bush-2517-sku-17677118/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 34 teeth for belt width 40mm for taper bush 2517 SKU: 17677117](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-34-teeth-for-belt-width-40mm-for-taper-bush-2517-sku-17677117/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 32 teeth for belt width 40mm for taper bush 2012 SKU: 17677116](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-32-teeth-for-belt-width-40mm-for-taper-bush-2012-sku-17677116/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 30 teeth for belt width 40mm for taper bush 2012 SKU: 17677115](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-30-teeth-for-belt-width-40mm-for-taper-bush-2012-sku-17677115/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Timing belt pulley HTD 14M material steel 28 teeth for belt width 40mm for taper bush 2012 SKU: 17677114](https://maedler.in/product/timing-belt-pulley-htd-14m-material-steel-28-teeth-for-belt-width-40mm-for-taper-bush-2012-sku-17677114/): Material: Up to a Teeth Number of 56 phosphated steel, from a Teeth Number of 64 phosphated grey cast iron GG25.Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Fixing plate for timing belts material aluminium HTD 8M belt width 85mm SKU: 17579900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-8m-belt-width-85mm-sku-17579900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt HTD 8M width 85mm Lw 2800mm 350 teeth SKU: 17575200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-2800mm-350-teeth-sku-17575200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 2400mm 300 teeth SKU: 17574800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-2400mm-300-teeth-sku-17574800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 2000mm 250 teeth SKU: 17574400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-2000mm-250-teeth-sku-17574400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1800mm 225 teeth SKU: 17574200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1800mm-225-teeth-sku-17574200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1760mm 220 teeth SKU: 17574000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1760mm-220-teeth-sku-17574000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1600mm 200 teeth SKU: 17573700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1600mm-200-teeth-sku-17573700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1440mm 180 teeth SKU: 17573400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1440mm-180-teeth-sku-17573400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1360mm 170 teeth SKU: 17573200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1360mm-170-teeth-sku-17573200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1280mm 160 teeth SKU: 17573000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1280mm-160-teeth-sku-17573000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1200mm 150 teeth SKU: 17572800](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1200mm-150-teeth-sku-17572800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1120mm 140 teeth SKU: 17572600](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1120mm-140-teeth-sku-17572600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 1040mm 130 teeth SKU: 17572400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-1040mm-130-teeth-sku-17572400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 960mm 120 teeth SKU: 17572100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-960mm-120-teeth-sku-17572100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 880mm 110 teeth SKU: 17571900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-880mm-110-teeth-sku-17571900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 800mm 100 teeth SKU: 17571700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-800mm-100-teeth-sku-17571700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 720mm 90 teeth SKU: 17571400](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-720mm-90-teeth-sku-17571400/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 656mm 82 teeth SKU: 17571200](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-656mm-82-teeth-sku-17571200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 640mm 80 teeth SKU: 17571100](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-640mm-80-teeth-sku-17571100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 600mm 75 teeth SKU: 17570900](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-600mm-75-teeth-sku-17570900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 560mm 70 teeth SKU: 17570700](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-560mm-70-teeth-sku-17570700/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm Lw 480mm 60 teeth SKU: 17570500](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-lw-480mm-60-teeth-sku-17570500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement.HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 8M width 85mm open length 8M-85 SKU: 17570000](https://maedler.in/product/neoprene-timing-belt-htd-8m-width-85mm-open-length-8m-85-sku-17570000/): Material: Neoprene (black) with tensile member of glasfibre. Neoprene belts cannot be welded. 5M-10 fits on pulleys for width 9mm. Temperature range -20º to +100ºC. - [Locking assembly BAR bore 14mm SKU: 61541400](https://maedler.in/product/locking-assembly-bar-bore-14mm-sku-61541400/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 12,7mm SKU: 61541270](https://maedler.in/product/locking-assembly-bar-bore-127mm-sku-61541270/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 12mm SKU: 61541200](https://maedler.in/product/locking-assembly-bar-bore-12mm-sku-61541200/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 11mm SKU: 61541100](https://maedler.in/product/locking-assembly-bar-bore-11mm-sku-61541100/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 10mm SKU: 61541000](https://maedler.in/product/locking-assembly-bar-bore-10mm-sku-61541000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 9.53mm SKU: 61540953](https://maedler.in/product/locking-assembly-bar-bore-9-53mm-sku-61540953/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 9mm SKU: 61540900](https://maedler.in/product/locking-assembly-bar-bore-9mm-sku-61540900/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 8mm SKU: 61540800](https://maedler.in/product/locking-assembly-bar-bore-8mm-sku-61540800/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 7mm SKU: 61540700](https://maedler.in/product/locking-assembly-bar-bore-7mm-sku-61540700/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 6.35mm SKU: 61540635](https://maedler.in/product/locking-assembly-bar-bore-6-35mm-sku-61540635/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 6mm SKU: 61540600](https://maedler.in/product/locking-assembly-bar-bore-6mm-sku-61540600/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 5mm SKU: 61540500](https://maedler.in/product/locking-assembly-bar-bore-5mm-sku-61540500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly COM-AS bore 85mm size 85x125x28mm SKU: 61530085](https://maedler.in/product/locking-assembly-com-as-bore-85mm-size-85x125x28mm-sku-61530085/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 75mm size 75x115x28mm SKU: 61530075](https://maedler.in/product/locking-assembly-com-as-bore-75mm-size-75x115x28mm-sku-61530075/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 65mm size 65x95x24mm SKU: 61530065](https://maedler.in/product/locking-assembly-com-as-bore-65mm-size-65x95x24mm-sku-61530065/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 42mm size 42x75x24mm SKU: 61530042](https://maedler.in/product/locking-assembly-com-as-bore-42mm-size-42x75x24mm-sku-61530042/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 40mm size 40x65x20mm SKU: 61530040](https://maedler.in/product/locking-assembly-com-as-bore-40mm-size-40x65x20mm-sku-61530040/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Like COM-A, but with slotted pressure rings. Not self-centering. Self-releasing at dismounting. No axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub / shaft Rz max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. - [Locking assembly COM-AS bore 38mm size 38x65x20mm SKU: 61530038](https://maedler.in/product/locking-assembly-com-as-bore-38mm-size-38x65x20mm-sku-61530038/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 30mm size 30x55x20mm SKU: 61530030](https://maedler.in/product/locking-assembly-com-as-bore-30mm-size-30x55x20mm-sku-61530030/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 25mm size 25x50x20mm SKU: 61530025](https://maedler.in/product/locking-assembly-com-as-bore-25mm-size-25x50x20mm-sku-61530025/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 22mm size 22x47x20mm SKU: 61530022](https://maedler.in/product/locking-assembly-com-as-bore-22mm-size-22x47x20mm-sku-61530022/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 18mm size 18-47 SKU: 61530018](https://maedler.in/product/locking-assembly-com-as-bore-18mm-size-18-47-sku-61530018/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 17mm size 17-44 SKU: 61530017](https://maedler.in/product/locking-assembly-com-as-bore-17mm-size-17-44-sku-61530017/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Locking assembly COM-AS bore 14mm size 14-42 SKU: 61530014](https://maedler.in/product/locking-assembly-com-as-bore-14mm-size-14-42-sku-61530014/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=1,000mm for 2,336,000Nm are available.Price and delivery time on request. - [Clamping bush MSD bore 50mm steel SKU: 61525000](https://maedler.in/product/clamping-bush-msd-bore-50mm-steel-sku-61525000/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 48mm steel SKU: 61524800](https://maedler.in/product/clamping-bush-msd-bore-48mm-steel-sku-61524800/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 45mm steel SKU: 61524500](https://maedler.in/product/clamping-bush-msd-bore-45mm-steel-sku-61524500/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 42mm steel SKU: 61524200](https://maedler.in/product/clamping-bush-msd-bore-42mm-steel-sku-61524200/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 40mm steel SKU: 61524000](https://maedler.in/product/clamping-bush-msd-bore-40mm-steel-sku-61524000/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 38mm steel SKU: 61523800](https://maedler.in/product/clamping-bush-msd-bore-38mm-steel-sku-61523800/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 35mm steel SKU: 61523500](https://maedler.in/product/clamping-bush-msd-bore-35mm-steel-sku-61523500/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 32mm steel SKU: 61523200](https://maedler.in/product/clamping-bush-msd-bore-32mm-steel-sku-61523200/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 30mm steel SKU: 61523000](https://maedler.in/product/clamping-bush-msd-bore-30mm-steel-sku-61523000/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 28mm steel SKU: 61522800](https://maedler.in/product/clamping-bush-msd-bore-28mm-steel-sku-61522800/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 25mm steel SKU: 61522500](https://maedler.in/product/clamping-bush-msd-bore-25mm-steel-sku-61522500/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 24mm steel SKU: 61522400](https://maedler.in/product/clamping-bush-msd-bore-24mm-steel-sku-61522400/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 22mm steel SKU: 61522200](https://maedler.in/product/clamping-bush-msd-bore-22mm-steel-sku-61522200/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 20mm steel SKU: 61522000](https://maedler.in/product/clamping-bush-msd-bore-20mm-steel-sku-61522000/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 19mm steel SKU: 61521900](https://maedler.in/product/clamping-bush-msd-bore-19mm-steel-sku-61521900/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Clamping bush MSD bore 15mm steel SKU: 61521500](https://maedler.in/product/clamping-bush-msd-bore-15mm-steel-sku-61521500/): Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 - 0,06 mm Tolerance: Shaft h8 - k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C. - [Mini clamping bush MSM bore 14mm SKU: 61521400](https://maedler.in/product/mini-clamping-bush-msm-bore-14mm-sku-61521400/): Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Mini clamping bush MSM bore 12mm SKU: 61521200](https://maedler.in/product/mini-clamping-bush-msm-bore-12mm-sku-61521200/): Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Mini clamping bush MSM bore 11mm SKU: 61521100](https://maedler.in/product/mini-clamping-bush-msm-bore-11mm-sku-61521100/): Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Mini clamping bush MSM bore 10mm SKU: 61521000](https://maedler.in/product/mini-clamping-bush-msm-bore-10mm-sku-61521000/): Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Mini clamping bush MSM bore 9mm SKU: 61520900](https://maedler.in/product/mini-clamping-bush-msm-bore-9mm-sku-61520900/): Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Mini clamping bush MSM bore 8mm SKU: 61520800](https://maedler.in/product/mini-clamping-bush-msm-bore-8mm-sku-61520800/): Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Mini clamping bush MSM bore 6mm SKU: 61520600](https://maedler.in/product/mini-clamping-bush-msm-bore-6mm-sku-61520600/): Material:Steel. Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Locking assembly SSGK bore 70mm size 70x84x31.5mm SKU: 61520170](https://maedler.in/product/locking-assembly-ssgk-bore-70mm-size-70x84x31-5mm-sku-61520170/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 65mm size 65x79x30.5mm SKU: 61520165](https://maedler.in/product/locking-assembly-ssgk-bore-65mm-size-65x79x30-5mm-sku-61520165/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 63mm size 63x79x30.5mm SKU: 61520163](https://maedler.in/product/locking-assembly-ssgk-bore-63mm-size-63x79x30-5mm-sku-61520163/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 60mm size 60x73x28.5mm SKU: 61520160](https://maedler.in/product/locking-assembly-ssgk-bore-60mm-size-60x73x28-5mm-sku-61520160/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 56mm size 56x68x27.5mm SKU: 61520156](https://maedler.in/product/locking-assembly-ssgk-bore-56mm-size-56x68x27-5mm-sku-61520156/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 55mm size 55x68x27.5mm SKU: 61520155](https://maedler.in/product/locking-assembly-ssgk-bore-55mm-size-55x68x27-5mm-sku-61520155/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 50mm size 50x62x25.5mm SKU: 61520150](https://maedler.in/product/locking-assembly-ssgk-bore-50mm-size-50x62x25-5mm-sku-61520150/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 48mm size 48x62x25.5mm SKU: 61520148](https://maedler.in/product/locking-assembly-ssgk-bore-48mm-size-48x62x25-5mm-sku-61520148/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 45mm size 45x57x25.5mm SKU: 61520145](https://maedler.in/product/locking-assembly-ssgk-bore-45mm-size-45x57x25-5mm-sku-61520145/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 42mm size 42x57x25.5mm SKU: 61520142](https://maedler.in/product/locking-assembly-ssgk-bore-42mm-size-42x57x25-5mm-sku-61520142/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 40mm size 40x52x24.5mm SKU: 61520140](https://maedler.in/product/locking-assembly-ssgk-bore-40mm-size-40x52x24-5mm-sku-61520140/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 38mm size 38x52x24.5mm SKU: 61520138](https://maedler.in/product/locking-assembly-ssgk-bore-38mm-size-38x52x24-5mm-sku-61520138/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 36mm size 36x45x21.5mm SKU: 61520136](https://maedler.in/product/locking-assembly-ssgk-bore-36mm-size-36x45x21-5mm-sku-61520136/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 35mm size 35x45x21.5mm SKU: 61520135](https://maedler.in/product/locking-assembly-ssgk-bore-35mm-size-35x45x21-5mm-sku-61520135/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 32mm size 32x45x21.5mm SKU: 61520132](https://maedler.in/product/locking-assembly-ssgk-bore-32mm-size-32x45x21-5mm-sku-61520132/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 30mm size 30x40x19.5mm SKU: 61520130](https://maedler.in/product/locking-assembly-ssgk-bore-30mm-size-30x40x19-5mm-sku-61520130/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 28mm size 28x40x19.5mm SKU: 61520128](https://maedler.in/product/locking-assembly-ssgk-bore-28mm-size-28x40x19-5mm-sku-61520128/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 25mm size 25x35x18mm SKU: 61520125](https://maedler.in/product/locking-assembly-ssgk-bore-25mm-size-25x35x18mm-sku-61520125/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 24mm size 24x35x18mm SKU: 61520124](https://maedler.in/product/locking-assembly-ssgk-bore-24mm-size-24x35x18mm-sku-61520124/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 22mm size 22x35x18mm SKU: 61520122](https://maedler.in/product/locking-assembly-ssgk-bore-22mm-size-22x35x18mm-sku-61520122/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 20mm size 20x30x18mm SKU: 61520120](https://maedler.in/product/locking-assembly-ssgk-bore-20mm-size-20x30x18mm-sku-61520120/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 19mm size 19x30x18mm SKU: 61520119](https://maedler.in/product/locking-assembly-ssgk-bore-19mm-size-19x30x18mm-sku-61520119/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 18mm size 18x30x18mm SKU: 61520118](https://maedler.in/product/locking-assembly-ssgk-bore-18mm-size-18x30x18mm-sku-61520118/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 17mm size 17x30x18mm SKU: 61520117](https://maedler.in/product/locking-assembly-ssgk-bore-17mm-size-17x30x18mm-sku-61520117/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 16mm size 16x25x16.5mm SKU: 61520116](https://maedler.in/product/locking-assembly-ssgk-bore-16mm-size-16x25x16-5mm-sku-61520116/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 15mm size 15x25x16.5mm SKU: 61520115](https://maedler.in/product/locking-assembly-ssgk-bore-15mm-size-15x25x16-5mm-sku-61520115/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSGK bore 14mm size 14x25x16.5mm SKU: 61520114](https://maedler.in/product/locking-assembly-ssgk-bore-14mm-size-14x25x16-5mm-sku-61520114/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 60mm size 60x70x52mm SKU: 61520060](https://maedler.in/product/locking-assembly-ssg-bore-60mm-size-60x70x52mm-sku-61520060/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 55mm size 55x65x46mm SKU: 61520055](https://maedler.in/product/locking-assembly-ssg-bore-55mm-size-55x65x46mm-sku-61520055/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 50mm size 50x60x46mm SKU: 61520050](https://maedler.in/product/locking-assembly-ssg-bore-50mm-size-50x60x46mm-sku-61520050/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 48mm size 48x60x46mm SKU: 61520048](https://maedler.in/product/locking-assembly-ssg-bore-48mm-size-48x60x46mm-sku-61520048/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 45mm size 45x55x46mm SKU: 61520045](https://maedler.in/product/locking-assembly-ssg-bore-45mm-size-45x55x46mm-sku-61520045/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 42mm size 42x55x46mm SKU: 61520042](https://maedler.in/product/locking-assembly-ssg-bore-42mm-size-42x55x46mm-sku-61520042/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 40mm size 40x50x45mm SKU: 61520040](https://maedler.in/product/locking-assembly-ssg-bore-40mm-size-40x50x45mm-sku-61520040/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 38mm size 38x50x45mm SKU: 61520038](https://maedler.in/product/locking-assembly-ssg-bore-38mm-size-38x50x45mm-sku-61520038/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 35mm size 35x45x44mm SKU: 61520035](https://maedler.in/product/locking-assembly-ssg-bore-35mm-size-35x45x44mm-sku-61520035/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 32mm size 32x45x44mm SKU: 61520032](https://maedler.in/product/locking-assembly-ssg-bore-32mm-size-32x45x44mm-sku-61520032/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 30mm size 30x40x42mm SKU: 61520030](https://maedler.in/product/locking-assembly-ssg-bore-30mm-size-30x40x42mm-sku-61520030/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 28mm size 28x40x42mm SKU: 61520028](https://maedler.in/product/locking-assembly-ssg-bore-28mm-size-28x40x42mm-sku-61520028/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 25mm size 25x35x36mm SKU: 61520025](https://maedler.in/product/locking-assembly-ssg-bore-25mm-size-25x35x36mm-sku-61520025/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 24mm size 24x35x36mm SKU: 61520024](https://maedler.in/product/locking-assembly-ssg-bore-24mm-size-24x35x36mm-sku-61520024/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 22mm size 22x35x36mm SKU: 61520022](https://maedler.in/product/locking-assembly-ssg-bore-22mm-size-22x35x36mm-sku-61520022/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 20mm size 20x30x32mm SKU: 61520020](https://maedler.in/product/locking-assembly-ssg-bore-20mm-size-20x30x32mm-sku-61520020/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 19mm size 19x30x32mm SKU: 61520019](https://maedler.in/product/locking-assembly-ssg-bore-19mm-size-19x30x32mm-sku-61520019/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 18mm size 18x30x32mm SKU: 61520018](https://maedler.in/product/locking-assembly-ssg-bore-18mm-size-18x30x32mm-sku-61520018/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 17mm size 17x25x32mm SKU: 61520017](https://maedler.in/product/locking-assembly-ssg-bore-17mm-size-17x25x32mm-sku-61520017/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 16mm size 16x25x30mm SKU: 61520016](https://maedler.in/product/locking-assembly-ssg-bore-16mm-size-16x25x30mm-sku-61520016/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 15mm size 15x25x30mm SKU: 61520015](https://maedler.in/product/locking-assembly-ssg-bore-15mm-size-15x25x30mm-sku-61520015/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SSG bore 14mm size 14x25x30mm SKU: 61520014](https://maedler.in/product/locking-assembly-ssg-bore-14mm-size-14x25x30mm-sku-61520014/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Also suitable for small hub diameters. Self-centering. Self-locking. Axial offset during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. - [Locking assembly SIG stainless steel 1.4301 bore 40mm SKU: 61514000](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-40mm-sku-61514000/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 38mm SKU: 61513800](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-38mm-sku-61513800/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 35mm SKU: 61513500](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-35mm-sku-61513500/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly SIG stainless steel 1.4301 bore 32mm SKU: 61513200](https://maedler.in/product/locking-assembly-sig-stainless-steel-1-4301-bore-32mm-sku-61513200/): Material: Stainless steel 1.4301 (AISI 304). These clamping set consists of three parts and allows to fix a cylindrical shaft inside a cylindrical bore in the drive wheel. • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. • For lower torques. • Minimal space requirement. • Self-centering. • Axial movement during mounting. • The connection can be disassembled with a puller. Mounting: The locking assembly has to be mounted without lubrication to achieve the torques stated above. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Neoprene timing belt 240 XL 025 120 teeth Lw 609.6mm belt width 6.35mm SKU: 18064800](https://maedler.in/product/neoprene-timing-belt-240-xl-025-120-teeth-lw-609-6mm-belt-width-6-35mm-sku-18064800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 230 XL 025 115 teeth Lw 584.2mm belt width 6.35mm SKU: 18064600](https://maedler.in/product/neoprene-timing-belt-230-xl-025-115-teeth-lw-584-2mm-belt-width-6-35mm-sku-18064600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 220 XL 025 110 teeth Lw 558.8mm belt width 6.35mm SKU: 18064400](https://maedler.in/product/neoprene-timing-belt-220-xl-025-110-teeth-lw-558-8mm-belt-width-6-35mm-sku-18064400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 XL 025 105 teeth Lw 533.4mm belt width 6.35mm SKU: 18064200](https://maedler.in/product/neoprene-timing-belt-210-xl-025-105-teeth-lw-533-4mm-belt-width-6-35mm-sku-18064200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 XL 025 100 teeth Lw 508.0mm belt width 6.35mm SKU: 18064000](https://maedler.in/product/neoprene-timing-belt-200-xl-025-100-teeth-lw-508-0mm-belt-width-6-35mm-sku-18064000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 190 XL 025 95 teeth Lw 482.6mm belt width 6.35mm SKU: 18063800](https://maedler.in/product/neoprene-timing-belt-190-xl-025-95-teeth-lw-482-6mm-belt-width-6-35mm-sku-18063800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 180 XL 025 90 teeth Lw 457.2mm belt width 6.35mm SKU: 18063600](https://maedler.in/product/neoprene-timing-belt-180-xl-025-90-teeth-lw-457-2mm-belt-width-6-35mm-sku-18063600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 170 XL 025 85 teeth Lw 431.8mm belt width 6.35mm SKU: 18063400](https://maedler.in/product/neoprene-timing-belt-170-xl-025-85-teeth-lw-431-8mm-belt-width-6-35mm-sku-18063400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 160 XL 025 80 teeth Lw 406.4mm belt width 6.35mm SKU: 18063200](https://maedler.in/product/neoprene-timing-belt-160-xl-025-80-teeth-lw-406-4mm-belt-width-6-35mm-sku-18063200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 XL 025 75 teeth Lw 381.0mm belt width 6.35mm SKU: 18063000](https://maedler.in/product/neoprene-timing-belt-150-xl-025-75-teeth-lw-381-0mm-belt-width-6-35mm-sku-18063000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 140 XL 025 70 teeth Lw 355.6mm belt width 6.35mm SKU: 18062800](https://maedler.in/product/neoprene-timing-belt-140-xl-025-70-teeth-lw-355-6mm-belt-width-6-35mm-sku-18062800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 130 XL 025 65 teeth Lw 330.2mm belt width 6.35mm SKU: 18062600](https://maedler.in/product/neoprene-timing-belt-130-xl-025-65-teeth-lw-330-2mm-belt-width-6-35mm-sku-18062600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 120 XL 025 60 teeth Lw 304.8mm belt width 6.35mm SKU: 18062400](https://maedler.in/product/neoprene-timing-belt-120-xl-025-60-teeth-lw-304-8mm-belt-width-6-35mm-sku-18062400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 110 XL 025 55 teeth Lw 279.4mm belt width 6.35mm SKU: 18062200](https://maedler.in/product/neoprene-timing-belt-110-xl-025-55-teeth-lw-279-4mm-belt-width-6-35mm-sku-18062200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 100 XL 025 50 teeth Lw 254.0mm belt width 6.35mm SKU: 18062000](https://maedler.in/product/neoprene-timing-belt-100-xl-025-50-teeth-lw-254-0mm-belt-width-6-35mm-sku-18062000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 90 XL 025 45 teeth Lw 228.6mm belt width 6.35mm SKU: 18061800](https://maedler.in/product/neoprene-timing-belt-90-xl-025-45-teeth-lw-228-6mm-belt-width-6-35mm-sku-18061800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 80 XL 025 40 teeth Lw 203.2mm belt width 6.35mm SKU: 18061600](https://maedler.in/product/neoprene-timing-belt-80-xl-025-40-teeth-lw-203-2mm-belt-width-6-35mm-sku-18061600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 70 XL 025 35 teeth Lw 177.8mm belt width 6.35mm SKU: 18061400](https://maedler.in/product/neoprene-timing-belt-70-xl-025-35-teeth-lw-177-8mm-belt-width-6-35mm-sku-18061400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 60 XL 025 30 teeth Lw 152.4mm belt width 6.35mm SKU: 18061200](https://maedler.in/product/neoprene-timing-belt-60-xl-025-30-teeth-lw-152-4mm-belt-width-6-35mm-sku-18061200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Timing belt pulley XL material aluminium 72 teeth for belt width 037=9.53mm SKU: 18037200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-72-teeth-for-belt-width-0379-53mm-sku-18037200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 60 teeth for belt width 037=9.53mm SKU: 18036000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-60-teeth-for-belt-width-0379-53mm-sku-18036000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 48 teeth for belt width 037=9.53mm SKU: 18034800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-48-teeth-for-belt-width-0379-53mm-sku-18034800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 44 teeth for belt width 037=9.53mm SKU: 18034400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-44-teeth-for-belt-width-0379-53mm-sku-18034400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 42 teeth for belt width 037=9.53mm SKU: 18034200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-42-teeth-for-belt-width-0379-53mm-sku-18034200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 40 teeth for belt width 037=9.53mm SKU: 18034000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-40-teeth-for-belt-width-0379-53mm-sku-18034000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 38 teeth for belt width 037=9.53mm SKU: 18033800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-38-teeth-for-belt-width-0379-53mm-sku-18033800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 36 teeth for belt width 037=9.53mm SKU: 18033600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-36-teeth-for-belt-width-0379-53mm-sku-18033600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 35 teeth for belt width 037=9.53mm SKU: 18033500](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-35-teeth-for-belt-width-0379-53mm-sku-18033500/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 34 teeth for belt width 037=9.53mm SKU: 18033400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-34-teeth-for-belt-width-0379-53mm-sku-18033400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 32 teeth for belt width 037=9.53mm SKU: 18033200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-32-teeth-for-belt-width-0379-53mm-sku-18033200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 30 teeth for belt width 037=9.53mm SKU: 18033000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-30-teeth-for-belt-width-0379-53mm-sku-18033000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 28 teeth for belt width 037=9.53mm SKU: 18032800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-28-teeth-for-belt-width-0379-53mm-sku-18032800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 27 teeth for belt width 037=9.53mm SKU: 18032700](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-27-teeth-for-belt-width-0379-53mm-sku-18032700/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 26 teeth for belt width 037=9.53mm SKU: 18032600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-26-teeth-for-belt-width-0379-53mm-sku-18032600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 24 teeth for belt width 037=9.53mm SKU: 18032400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-24-teeth-for-belt-width-0379-53mm-sku-18032400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 22 teeth for belt width 037=9.53mm SKU: 18032200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-22-teeth-for-belt-width-0379-53mm-sku-18032200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 21 teeth for belt width 037=9.53mm SKU: 18032100](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-21-teeth-for-belt-width-0379-53mm-sku-18032100/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 20 teeth for belt width 037=9.53mm SKU: 18032000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-20-teeth-for-belt-width-0379-53mm-sku-18032000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 19 teeth for belt width 037=9.53mm SKU: 18031900](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-19-teeth-for-belt-width-0379-53mm-sku-18031900/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 18 teeth for belt width 037=9.53mm SKU: 18031800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-18-teeth-for-belt-width-0379-53mm-sku-18031800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 17 teeth for belt width 037=9.53mm SKU: 18031700](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-17-teeth-for-belt-width-0379-53mm-sku-18031700/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 16 teeth for belt width 037=9.53mm SKU: 18031600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-16-teeth-for-belt-width-0379-53mm-sku-18031600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 15 teeth for belt width 037=9.53mm SKU: 18031500](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-15-teeth-for-belt-width-0379-53mm-sku-18031500/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 14 teeth for belt width 037=9.53mm SKU: 18031400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-14-teeth-for-belt-width-0379-53mm-sku-18031400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 13 teeth for belt width 037=9.53mm SKU: 18031300](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-13-teeth-for-belt-width-0379-53mm-sku-18031300/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 12 teeth for belt width 037=9.53mm SKU: 18031200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-12-teeth-for-belt-width-0379-53mm-sku-18031200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 11 teeth for belt width 037=9.53mm SKU: 18031100](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-11-teeth-for-belt-width-0379-53mm-sku-18031100/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 10 teeth for belt width 037=9.53mm SKU: 18031000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-10-teeth-for-belt-width-0379-53mm-sku-18031000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. - [Timing belt pulley XL material aluminium 72 teeth for belt width 025=6,35mm SKU: 18017200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-72-teeth-for-belt-width-025635mm-sku-18017200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 60 teeth for belt width 025=6,35mm SKU: 18016000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-60-teeth-for-belt-width-025635mm-sku-18016000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 48 teeth for belt width 025=6,35mm SKU: 18014800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-48-teeth-for-belt-width-025635mm-sku-18014800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 44 teeth for belt width 025=6,35mm SKU: 18014400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-44-teeth-for-belt-width-025635mm-sku-18014400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 42 teeth for belt width 025=6,35mm SKU: 18014200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-42-teeth-for-belt-width-025635mm-sku-18014200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 40 teeth for belt width 025=6,35mm SKU: 18014000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-40-teeth-for-belt-width-025635mm-sku-18014000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 38 teeth for belt width 025=6,35mm SKU: 18013800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-38-teeth-for-belt-width-025635mm-sku-18013800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 36 teeth for belt width 025=6,35mm SKU: 18013600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-36-teeth-for-belt-width-025635mm-sku-18013600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 35 teeth for belt width 025=6,35mm SKU: 18013500](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-35-teeth-for-belt-width-025635mm-sku-18013500/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 34 teeth for belt width 025=6,35mm SKU: 18013400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-34-teeth-for-belt-width-025635mm-sku-18013400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 32 teeth for belt width 025=6,35mm SKU: 18013200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-32-teeth-for-belt-width-025635mm-sku-18013200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 30 teeth for belt width 025=6,35mm SKU: 18013000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-30-teeth-for-belt-width-025635mm-sku-18013000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 28 teeth for belt width 025=6,35mm SKU: 18012800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-28-teeth-for-belt-width-025635mm-sku-18012800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 27 teeth for belt width 025=6,35mm SKU: 18012700](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-27-teeth-for-belt-width-025635mm-sku-18012700/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 26 teeth for belt width 025=6,35mm SKU: 18012600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-26-teeth-for-belt-width-025635mm-sku-18012600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 24 teeth for belt width 025=6,35mm SKU: 18012400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-24-teeth-for-belt-width-025635mm-sku-18012400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 22 teeth for belt width 025=6,35mm SKU: 18012200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-22-teeth-for-belt-width-025635mm-sku-18012200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 21 teeth for belt width 025=6,35mm SKU: 18012100](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-21-teeth-for-belt-width-025635mm-sku-18012100/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 20 teeth for belt width 025=6,35mm SKU: 18012000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-20-teeth-for-belt-width-025635mm-sku-18012000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 19 teeth for belt width 025=6,35mm SKU: 18011900](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-19-teeth-for-belt-width-025635mm-sku-18011900/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 18 teeth for belt width 025=6,35mm SKU: 18011800](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-18-teeth-for-belt-width-025635mm-sku-18011800/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 17 teeth for belt width 025=6,35mm SKU: 18011700](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-17-teeth-for-belt-width-025635mm-sku-18011700/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 16 teeth for belt width 025=6,35mm SKU: 18011600](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-16-teeth-for-belt-width-025635mm-sku-18011600/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 15 teeth for belt width 025=6,35mm SKU: 18011500](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-15-teeth-for-belt-width-025635mm-sku-18011500/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 14 teeth for belt width 025=6,35mm SKU: 18011400](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-14-teeth-for-belt-width-025635mm-sku-18011400/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 13 teeth for belt width 025=6,35mm SKU: 18011300](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-13-teeth-for-belt-width-025635mm-sku-18011300/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 12 teeth for belt width 025=6,35mm SKU: 18011200](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-12-teeth-for-belt-width-025635mm-sku-18011200/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 11 teeth for belt width 025=6,35mm SKU: 18011100](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-11-teeth-for-belt-width-025635mm-sku-18011100/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Timing belt pulley XL material aluminium 10 teeth for belt width 025=6,35mm SKU: 18011000](https://maedler.in/product/timing-belt-pulley-xl-material-aluminium-10-teeth-for-belt-width-025635mm-sku-18011000/): Material: Aluminium similar EN AW2017A.Flanges zinc-plated steel. Pre-bored (up to a Teeth Number of 24 only centre hole).Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. - [Fixing plate for timing belts material aluminium HTD 14M belt width 170mm SKU: 17766999](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-170mm-sku-17766999/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium HTD 14M belt width 115mm SKU: 17766799](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-115mm-sku-17766799/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Fixing plate for timing belts material aluminium HTD 14M belt width 85mm SKU: 17766599](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-85mm-sku-17766599/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt HTD 14M width 85mm 14M-85 open length PAZ = Polyamide fabric on tooth side SKU: 17766501](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-85mm-14m-85-open-length-paz-polyamide-fabric-on-tooth-side-sku-17766501/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 14M width 85mm 14M-85 open length SKU: 17766500](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-85mm-14m-85-open-length-sku-17766500/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium HTD 14M belt width 55mm SKU: 17766399](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-55mm-sku-17766399/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt HTD 14M width 55mm 14M-55 open length PAZ = Polyamide fabric on tooth side SKU: 17766301](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-55mm-14m-55-open-length-paz-polyamide-fabric-on-tooth-side-sku-17766301/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 14M width 55mm 14M-55 open length SKU: 17766300](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-55mm-14m-55-open-length-sku-17766300/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [Fixing plate for timing belts material aluminium HTD 14M belt width 40mm SKU: 17766199](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-htd-14m-belt-width-40mm-sku-17766199/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Polyurethane timing belt HTD 14M width 40mm 14M-40 open length PAZ = Polyamide fabric on tooth side SKU: 17766101](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-40mm-14m-40-open-length-paz-polyamide-fabric-on-tooth-side-sku-17766101/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. With green polyamide fabric on the tooth side. Temperature range -30º to +80ºC. TPU PAZ belts can be welded to endless belts (tensile force -50%). The polyamide fabric reduces the friction on aluminium or steel plates to approx. 50%. On plastic sliding plates, the friction reduction is approx. 30%. So, depending on the application, the needed driving power is much lower. By the fabric, the wear resistance of the belt is much higher and the noise is lower. Application: for example supported transportation belt drives. - [Polyurethane timing belt HTD 14M width 40mm 14M-40 open length SKU: 17766100](https://maedler.in/product/polyurethane-timing-belt-htd-14m-width-40mm-14m-40-open-length-sku-17766100/): Material: Thermoplastic polyurethane (TPU), white, with steel tensile member. Good resistance against oil, fats and many chemicals. Temperature range -30º to +80ºC. Belts made of TPU can be welded to endless belts. When welded, the perm. tensile force is reduced to 50%. - [timing belt HTD-14M, width 85mm, Lw=4578mm, teeth: 327 SKU: 17755100](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw4578mm-teeth-327-sku-17755100/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=4326mm, teeth: 309 SKU: 17754800](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw4326mm-teeth-309-sku-17754800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=3850mm, teeth: 275 SKU: 17754500](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw3850mm-teeth-275-sku-17754500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=3500mm, teeth: 250 SKU: 17754200](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw3500mm-teeth-250-sku-17754200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=3150mm, teeth: 225 SKU: 17753900](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw3150mm-teeth-225-sku-17753900/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=2800mm, teeth: 200 SKU: 17753600](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw2800mm-teeth-200-sku-17753600/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=2590mm, teeth: 185 SKU: 17753200](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw2590mm-teeth-185-sku-17753200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [timing belt HTD-14M, width 85mm, Lw=2450mm, teeth: 175 SKU: 17753000](https://maedler.in/product/timing-belt-htd-14m-width-85mm-lw2450mm-teeth-175-sku-17753000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 2310mm 165 teeth SKU: 17752800](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-2310mm-165-teeth-sku-17752800/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 2100mm 150 teeth SKU: 17752500](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-2100mm-150-teeth-sku-17752500/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 1890mm 135 teeth SKU: 17752200](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1890mm-135-teeth-sku-17752200/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [Neoprene timing belt HTD 14M width 85mm Lw 1778mm 127 teeth SKU: 17752000](https://maedler.in/product/neoprene-timing-belt-htd-14m-width-85mm-lw-1778mm-127-teeth-sku-17752000/): Material: Neoprene with glas-fibre tensile member. Contact surface lined with polyamide reinforcement. HTD (High Torque Drive) timing belt with semi-circular teeth profile for a more constant progress of stress in the tooth profile, for the transmisssion of high loads. Belts sold by the meter on request. Temperature range -20º to +100ºC. - [locking assembly TOK type A bore 30mm steel SKU: 61550330](https://maedler.in/product/locking-assembly-tok-type-a-bore-30mm-steel-sku-61550330/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 28mm steel SKU: 61550328](https://maedler.in/product/locking-assembly-tok-type-a-bore-28mm-steel-sku-61550328/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 25mm steel SKU: 61550325](https://maedler.in/product/locking-assembly-tok-type-a-bore-25mm-steel-sku-61550325/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 24mm steel SKU: 61550324](https://maedler.in/product/locking-assembly-tok-type-a-bore-24mm-steel-sku-61550324/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 22mm steel SKU: 61550322](https://maedler.in/product/locking-assembly-tok-type-a-bore-22mm-steel-sku-61550322/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 20mm steel SKU: 61550320](https://maedler.in/product/locking-assembly-tok-type-a-bore-20mm-steel-sku-61550320/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 19mm steel SKU: 61550319](https://maedler.in/product/locking-assembly-tok-type-a-bore-19mm-steel-sku-61550319/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 18mm steel SKU: 61550318](https://maedler.in/product/locking-assembly-tok-type-a-bore-18mm-steel-sku-61550318/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 17mm steel SKU: 61550317](https://maedler.in/product/locking-assembly-tok-type-a-bore-17mm-steel-sku-61550317/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 16mm steel SKU: 61550316](https://maedler.in/product/locking-assembly-tok-type-a-bore-16mm-steel-sku-61550316/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 15mm steel SKU: 61550315](https://maedler.in/product/locking-assembly-tok-type-a-bore-15mm-steel-sku-61550315/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 14mm steel SKU: 61550314](https://maedler.in/product/locking-assembly-tok-type-a-bore-14mm-steel-sku-61550314/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 12mm steel SKU: 61550312](https://maedler.in/product/locking-assembly-tok-type-a-bore-12mm-steel-sku-61550312/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 11mm steel SKU: 61550311](https://maedler.in/product/locking-assembly-tok-type-a-bore-11mm-steel-sku-61550311/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 10mm steel SKU: 61550310](https://maedler.in/product/locking-assembly-tok-type-a-bore-10mm-steel-sku-61550310/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 9mm steel SKU: 61550309](https://maedler.in/product/locking-assembly-tok-type-a-bore-9mm-steel-sku-61550309/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 8mm steel SKU: 61550308](https://maedler.in/product/locking-assembly-tok-type-a-bore-8mm-steel-sku-61550308/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 7mm steel SKU: 61550307](https://maedler.in/product/locking-assembly-tok-type-a-bore-7mm-steel-sku-61550307/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 6mm steel SKU: 61550306](https://maedler.in/product/locking-assembly-tok-type-a-bore-6mm-steel-sku-61550306/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 5mm steel SKU: 61550305](https://maedler.in/product/locking-assembly-tok-type-a-bore-5mm-steel-sku-61550305/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TMK type A bore 45mm steel SKU: 61550245](https://maedler.in/product/locking-assembly-tmk-type-a-bore-45mm-steel-sku-61550245/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 42mm steel SKU: 61550242](https://maedler.in/product/locking-assembly-tmk-type-a-bore-42mm-steel-sku-61550242/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 40mm steel SKU: 61550240](https://maedler.in/product/locking-assembly-tmk-type-a-bore-40mm-steel-sku-61550240/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 38mm steel SKU: 61550238](https://maedler.in/product/locking-assembly-tmk-type-a-bore-38mm-steel-sku-61550238/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 35mm steel SKU: 61550235](https://maedler.in/product/locking-assembly-tmk-type-a-bore-35mm-steel-sku-61550235/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 32mm steel SKU: 61550232](https://maedler.in/product/locking-assembly-tmk-type-a-bore-32mm-steel-sku-61550232/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 30mm steel SKU: 61550230](https://maedler.in/product/locking-assembly-tmk-type-a-bore-30mm-steel-sku-61550230/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 28mm steel SKU: 61550228](https://maedler.in/product/locking-assembly-tmk-type-a-bore-28mm-steel-sku-61550228/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 25mm steel SKU: 61550225](https://maedler.in/product/locking-assembly-tmk-type-a-bore-25mm-steel-sku-61550225/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. With a second hexagon to hold against while tightening the nut. Axial offset during mounting (can be compensated by correct positioning).   Mounting It is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table. Demounting Hold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 24mm steel SKU: 61550224](https://maedler.in/product/locking-assembly-tmk-type-a-bore-24mm-steel-sku-61550224/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 22mm steel SKU: 61550222](https://maedler.in/product/locking-assembly-tmk-type-a-bore-22mm-steel-sku-61550222/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 20mm steel SKU: 61550220](https://maedler.in/product/locking-assembly-tmk-type-a-bore-20mm-steel-sku-61550220/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. With a second hexagon to hold against while tightening the nut. Axial offset during mounting (can be compensated by correct positioning).   Mounting It is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table. Demounting Hold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 19mm steel SKU: 61550219](https://maedler.in/product/locking-assembly-tmk-type-a-bore-19mm-steel-sku-61550219/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 18mm steel SKU: 61550218](https://maedler.in/product/locking-assembly-tmk-type-a-bore-18mm-steel-sku-61550218/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 17mm steel SKU: 61550217](https://maedler.in/product/locking-assembly-tmk-type-a-bore-17mm-steel-sku-61550217/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. With a second hexagon to hold against while tightening the nut. Axial offset during mounting (can be compensated by correct positioning).   Mounting It is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table. Demounting Hold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 16mm steel SKU: 61550216](https://maedler.in/product/locking-assembly-tmk-type-a-bore-16mm-steel-sku-61550216/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 15mm steel SKU: 61550215](https://maedler.in/product/locking-assembly-tmk-type-a-bore-15mm-steel-sku-61550215/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. With a second hexagon to hold against while tightening the nut. Axial offset during mounting (can be compensated by correct positioning).   Mounting It is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table. Demounting Hold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 14mm steel SKU: 61550214](https://maedler.in/product/locking-assembly-tmk-type-a-bore-14mm-steel-sku-61550214/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 12mm steel SKU: 61550212](https://maedler.in/product/locking-assembly-tmk-type-a-bore-12mm-steel-sku-61550212/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 11mm steel SKU: 61550211](https://maedler.in/product/locking-assembly-tmk-type-a-bore-11mm-steel-sku-61550211/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 10mm steel SKU: 61550210](https://maedler.in/product/locking-assembly-tmk-type-a-bore-10mm-steel-sku-61550210/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 9mm steel SKU: 61550209](https://maedler.in/product/locking-assembly-tmk-type-a-bore-9mm-steel-sku-61550209/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 8mm steel SKU: 61550208](https://maedler.in/product/locking-assembly-tmk-type-a-bore-8mm-steel-sku-61550208/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 7mm steel SKU: 61550207](https://maedler.in/product/locking-assembly-tmk-type-a-bore-7mm-steel-sku-61550207/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 6mm steel SKU: 61550206](https://maedler.in/product/locking-assembly-tmk-type-a-bore-6mm-steel-sku-61550206/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [locking assembly TMK type A bore 5mm steel SKU: 61550205](https://maedler.in/product/locking-assembly-tmk-type-a-bore-5mm-steel-sku-61550205/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.With a second hexagon to hold against while tightening the nut.Axial offset during mounting (can be compensated by correct positioning).MountingIt is essential to degrease the shaft and hub. There must be little oil only between the two hexagons. The locking assembly must not get in contact with any fixed components. Hold the back hexagon with a slim open-end wrench and tighten the front hexagon with a torque wrench clockwise to the torque TA as per the table.DemountingHold the back hexagon with a slim open-end wrench and loosen the front hexagon counter-clockwise, until the inner bush moved a few millimeters out of the outer bush. - [Locking assembly TT bore 35mm size 35-50 SKU: 61550135](https://maedler.in/product/locking-assembly-tt-bore-35mm-size-35-50-sku-61550135/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 32mm size 32-50 SKU: 61550132](https://maedler.in/product/locking-assembly-tt-bore-32mm-size-32-50-sku-61550132/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 30mm size 30-45 SKU: 61550130](https://maedler.in/product/locking-assembly-tt-bore-30mm-size-30-45-sku-61550130/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 28mm size 28-45 SKU: 61550128](https://maedler.in/product/locking-assembly-tt-bore-28mm-size-28-45-sku-61550128/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 25mm size 25-38 SKU: 61550125](https://maedler.in/product/locking-assembly-tt-bore-25mm-size-25-38-sku-61550125/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 24mm size 24-38 SKU: 61550124](https://maedler.in/product/locking-assembly-tt-bore-24mm-size-24-38-sku-61550124/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 22mm size 22-35 SKU: 61550122](https://maedler.in/product/locking-assembly-tt-bore-22mm-size-22-35-sku-61550122/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 20mm size 20-35 SKU: 61550120](https://maedler.in/product/locking-assembly-tt-bore-20mm-size-20-35-sku-61550120/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 19mm size 19-32 SKU: 61550119](https://maedler.in/product/locking-assembly-tt-bore-19mm-size-19-32-sku-61550119/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 18mm size 18-32 SKU: 61550118](https://maedler.in/product/locking-assembly-tt-bore-18mm-size-18-32-sku-61550118/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 17mm size 17-32 SKU: 61550117](https://maedler.in/product/locking-assembly-tt-bore-17mm-size-17-32-sku-61550117/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs: +/- 0.08mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 16mm size 16-26 SKU: 61550116](https://maedler.in/product/locking-assembly-tt-bore-16mm-size-16-26-sku-61550116/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 15mm size 15-26 SKU: 61550115](https://maedler.in/product/locking-assembly-tt-bore-15mm-size-15-26-sku-61550115/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 14mm size 14-26 SKU: 61550114](https://maedler.in/product/locking-assembly-tt-bore-14mm-size-14-26-sku-61550114/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 12mm size 12-23 SKU: 61550112](https://maedler.in/product/locking-assembly-tt-bore-12mm-size-12-23-sku-61550112/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 11mm size 11-23 SKU: 61550111](https://maedler.in/product/locking-assembly-tt-bore-11mm-size-11-23-sku-61550111/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 10mm size 10-23 SKU: 61550110](https://maedler.in/product/locking-assembly-tt-bore-10mm-size-10-23-sku-61550110/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 9mm size 9-20 SKU: 61550109](https://maedler.in/product/locking-assembly-tt-bore-9mm-size-9-20-sku-61550109/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 8mm size 8-20 SKU: 61550108](https://maedler.in/product/locking-assembly-tt-bore-8mm-size-8-20-sku-61550108/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 7mm size 7-20 SKU: 61550107](https://maedler.in/product/locking-assembly-tt-bore-7mm-size-7-20-sku-61550107/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 6mm size 6-16 SKU: 61550106](https://maedler.in/product/locking-assembly-tt-bore-6mm-size-6-16-sku-61550106/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 5mm size 5-16 SKU: 61550105](https://maedler.in/product/locking-assembly-tt-bore-5mm-size-5-16-sku-61550105/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 4mm size 4-16 SKU: 61550104](https://maedler.in/product/locking-assembly-tt-bore-4mm-size-4-16-sku-61550104/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly TT bore 3mm size 3-16 SKU: 61550103](https://maedler.in/product/locking-assembly-tt-bore-3mm-size-3-16-sku-61550103/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Axial offset during mounting (can be compensated by correct positioning). Tolerances, Surfaces Ø-tolerance for shafts and hubs +/- 0.04mm. Mounting It is essential to degrease the shaft and hub. Install clamping sets nearly completely degreased. Tighten the nut with a torque wrench with hexagon socket to the torque TA. - [Locking assembly BAR bore 100mm SKU: 61550000](https://maedler.in/product/locking-assembly-bar-bore-100mm-sku-61550000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 95mm SKU: 61549500](https://maedler.in/product/locking-assembly-bar-bore-95mm-sku-61549500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 90mm SKU: 61549000](https://maedler.in/product/locking-assembly-bar-bore-90mm-sku-61549000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 85mm SKU: 61548500](https://maedler.in/product/locking-assembly-bar-bore-85mm-sku-61548500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 80mm SKU: 61548000](https://maedler.in/product/locking-assembly-bar-bore-80mm-sku-61548000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 75mm SKU: 61547500](https://maedler.in/product/locking-assembly-bar-bore-75mm-sku-61547500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 70mm SKU: 61547000](https://maedler.in/product/locking-assembly-bar-bore-70mm-sku-61547000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 65mm SKU: 61546500](https://maedler.in/product/locking-assembly-bar-bore-65mm-sku-61546500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 60mm SKU: 61546000](https://maedler.in/product/locking-assembly-bar-bore-60mm-sku-61546000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 55mm SKU: 61545500](https://maedler.in/product/locking-assembly-bar-bore-55mm-sku-61545500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 50mm SKU: 61545000](https://maedler.in/product/locking-assembly-bar-bore-50mm-sku-61545000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 48mm SKU: 61544800](https://maedler.in/product/locking-assembly-bar-bore-48mm-sku-61544800/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 45mm SKU: 61544500](https://maedler.in/product/locking-assembly-bar-bore-45mm-sku-61544500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 42mm SKU: 61544200](https://maedler.in/product/locking-assembly-bar-bore-42mm-sku-61544200/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 40mm SKU: 61544000](https://maedler.in/product/locking-assembly-bar-bore-40mm-sku-61544000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 38mm SKU: 61543800](https://maedler.in/product/locking-assembly-bar-bore-38mm-sku-61543800/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 35mm SKU: 61543500](https://maedler.in/product/locking-assembly-bar-bore-35mm-sku-61543500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 32mm SKU: 61543200](https://maedler.in/product/locking-assembly-bar-bore-32mm-sku-61543200/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 30mm SKU: 61543000](https://maedler.in/product/locking-assembly-bar-bore-30mm-sku-61543000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 28mm SKU: 61542800](https://maedler.in/product/locking-assembly-bar-bore-28mm-sku-61542800/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 25.4mm (1 inch) SKU: 61542540](https://maedler.in/product/locking-assembly-bar-bore-25-4mm-1-inch-sku-61542540/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 25mm SKU: 61542500](https://maedler.in/product/locking-assembly-bar-bore-25mm-sku-61542500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 24mm SKU: 61542400](https://maedler.in/product/locking-assembly-bar-bore-24mm-sku-61542400/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 22mm SKU: 61542200](https://maedler.in/product/locking-assembly-bar-bore-22mm-sku-61542200/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 20mm SKU: 61542000](https://maedler.in/product/locking-assembly-bar-bore-20mm-sku-61542000/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 19mm SKU: 61541900](https://maedler.in/product/locking-assembly-bar-bore-19mm-sku-61541900/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 18mm SKU: 61541800](https://maedler.in/product/locking-assembly-bar-bore-18mm-sku-61541800/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 17mm SKU: 61541700](https://maedler.in/product/locking-assembly-bar-bore-17mm-sku-61541700/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 16mm SKU: 61541600](https://maedler.in/product/locking-assembly-bar-bore-16mm-sku-61541600/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Locking assembly BAR bore 15mm SKU: 61541500](https://maedler.in/product/locking-assembly-bar-bore-15mm-sku-61541500/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12.5 µm. - [Neoprene timing belt 60 MXL 012 75 teeth Lw 152.40mm belt width 3.2mm SKU: 18162500](https://maedler.in/product/neoprene-timing-belt-60-mxl-012-75-teeth-lw-152-40mm-belt-width-3-2mm-sku-18162500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 56 MXL 012 70 teeth Lw 142.24mm belt width 3.2mm SKU: 18162000](https://maedler.in/product/neoprene-timing-belt-56-mxl-012-70-teeth-lw-142-24mm-belt-width-3-2mm-sku-18162000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 52 MXL 012 65 teeth Lw 132.08mm belt width 3.2mm SKU: 18161500](https://maedler.in/product/neoprene-timing-belt-52-mxl-012-65-teeth-lw-132-08mm-belt-width-3-2mm-sku-18161500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 48 MXL 012 60 teeth Lw 121.92mm belt width 3.2mm SKU: 18161000](https://maedler.in/product/neoprene-timing-belt-48-mxl-012-60-teeth-lw-121-92mm-belt-width-3-2mm-sku-18161000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 44 MXL 012 55 teeth Lw 111.76mm belt width 3.2mm SKU: 18160700](https://maedler.in/product/neoprene-timing-belt-44-mxl-012-55-teeth-lw-111-76mm-belt-width-3-2mm-sku-18160700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 40 MXL 012 50 teeth Lw 101.60mm belt width 3.2mm SKU: 18160400](https://maedler.in/product/neoprene-timing-belt-40-mxl-012-50-teeth-lw-101-60mm-belt-width-3-2mm-sku-18160400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 36 MXL 45 teeth Lw 91. 44mm belt width 3.2mm SKU: 18160200](https://maedler.in/product/neoprene-timing-belt-36-mxl-45-teeth-lw-91-44mm-belt-width-3-2mm-sku-18160200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Timing belt pulley MXL material aluminium 72 teeth for belt width 025 SKU: 18137200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-72-teeth-for-belt-width-025-sku-18137200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 60 teeth for belt width 025 SKU: 18136000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-60-teeth-for-belt-width-025-sku-18136000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 48 teeth for belt width 025 SKU: 18134800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-48-teeth-for-belt-width-025-sku-18134800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 44 teeth for belt width 025 SKU: 18134400](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-44-teeth-for-belt-width-025-sku-18134400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 42 teeth for belt width 025 SKU: 18134200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-42-teeth-for-belt-width-025-sku-18134200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 40 teeth for belt width 025 SKU: 18134000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-40-teeth-for-belt-width-025-sku-18134000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 36 teeth for belt width 025 SKU: 18133600](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-36-teeth-for-belt-width-025-sku-18133600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 32 teeth for belt width 025 SKU: 18133200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-32-teeth-for-belt-width-025-sku-18133200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 30 teeth for belt width 025 SKU: 18133000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-30-teeth-for-belt-width-025-sku-18133000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 28 teeth for belt width 025 SKU: 18132800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-28-teeth-for-belt-width-025-sku-18132800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 24 teeth for belt width 025 SKU: 18132400](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-24-teeth-for-belt-width-025-sku-18132400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 22 teeth for belt width 025 SKU: 18132200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-22-teeth-for-belt-width-025-sku-18132200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 20 teeth for belt width 025 SKU: 18132000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-20-teeth-for-belt-width-025-sku-18132000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 18 teeth for belt width 025 SKU: 18131800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-18-teeth-for-belt-width-025-sku-18131800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 16 teeth for belt width 025 SKU: 18131600](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-16-teeth-for-belt-width-025-sku-18131600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. - [Timing belt pulley MXL material aluminium 72 teeth for belt width 012 SKU: 18117200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-72-teeth-for-belt-width-012-sku-18117200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 60 teeth for belt width 012 SKU: 18116000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-60-teeth-for-belt-width-012-sku-18116000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 48 teeth for belt width 012 SKU: 18114800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-48-teeth-for-belt-width-012-sku-18114800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 44 teeth for belt width 012 SKU: 18114400](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-44-teeth-for-belt-width-012-sku-18114400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 42 teeth for belt width 012 SKU: 18114200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-42-teeth-for-belt-width-012-sku-18114200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 40 teeth for belt width 012 SKU: 18114000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-40-teeth-for-belt-width-012-sku-18114000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 36 teeth for belt width 012 SKU: 18113600](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-36-teeth-for-belt-width-012-sku-18113600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 32 teeth for belt width 012 SKU: 18113200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-32-teeth-for-belt-width-012-sku-18113200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 30 teeth for belt width 012 SKU: 18113000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-30-teeth-for-belt-width-012-sku-18113000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 28 teeth for belt width 012 SKU: 18112800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-28-teeth-for-belt-width-012-sku-18112800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 24 teeth for belt width 012 SKU: 18112400](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-24-teeth-for-belt-width-012-sku-18112400/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 22 teeth for belt width 012 SKU: 18112200](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-22-teeth-for-belt-width-012-sku-18112200/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 20 teeth for belt width 012 SKU: 18112000](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-20-teeth-for-belt-width-012-sku-18112000/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 18 teeth for belt width 012 SKU: 18111800](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-18-teeth-for-belt-width-012-sku-18111800/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [Timing belt pulley MXL material aluminium 16 teeth for belt width 012 SKU: 18111600](https://maedler.in/product/timing-belt-pulley-mxl-material-aluminium-16-teeth-for-belt-width-012-sku-18111600/): Material: Aluminium similar EN AW2017A. Flanges zinc-plated steel. Pre-bored (from a Teeth Number of 22). Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2 mm. - [timing bar XL 1/5" (5.08mm) 72 teeth length 160mm material aluminium SKU: 18097200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-72-teeth-length-160mm-material-aluminium-sku-18097200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 60 teeth length 160mm material aluminium SKU: 18096000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-60-teeth-length-160mm-material-aluminium-sku-18096000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 56 teeth length 160mm material aluminium SKU: 18095600](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-56-teeth-length-160mm-material-aluminium-sku-18095600/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 48 teeth length 160mm material aluminium SKU: 18094800](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-48-teeth-length-160mm-material-aluminium-sku-18094800/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 44 teeth length 160mm material aluminium SKU: 18094400](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-44-teeth-length-160mm-material-aluminium-sku-18094400/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 43 teeth length 160mm material aluminium SKU: 18094300](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-43-teeth-length-160mm-material-aluminium-sku-18094300/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 42 teeth length 160mm material aluminium SKU: 18094200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-42-teeth-length-160mm-material-aluminium-sku-18094200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 41 teeth length 160mm material aluminium SKU: 18094100](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-41-teeth-length-160mm-material-aluminium-sku-18094100/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 40 teeth length 160mm material aluminium SKU: 18094000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-40-teeth-length-160mm-material-aluminium-sku-18094000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 39 teeth length 160mm material aluminium SKU: 18093900](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-39-teeth-length-160mm-material-aluminium-sku-18093900/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 38 teeth length 160mm material aluminium SKU: 18093800](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-38-teeth-length-160mm-material-aluminium-sku-18093800/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 36 teeth length 160mm material aluminium SKU: 18093600](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-36-teeth-length-160mm-material-aluminium-sku-18093600/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 35 teeth length 160mm material aluminium SKU: 18093500](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-35-teeth-length-160mm-material-aluminium-sku-18093500/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 34 teeth length 160mm material aluminium SKU: 18093400](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-34-teeth-length-160mm-material-aluminium-sku-18093400/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 33 teeth length 160mm material aluminium SKU: 18093300](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-33-teeth-length-160mm-material-aluminium-sku-18093300/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 32 teeth length 160mm material aluminium SKU: 18093200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-32-teeth-length-160mm-material-aluminium-sku-18093200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 30 teeth length 160mm material aluminium SKU: 18093000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-30-teeth-length-160mm-material-aluminium-sku-18093000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 29 teeth length 160mm material aluminium SKU: 18092900](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-29-teeth-length-160mm-material-aluminium-sku-18092900/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 28 teeth length 160mm material aluminium SKU: 18092800](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-28-teeth-length-160mm-material-aluminium-sku-18092800/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 27 teeth length 160mm material aluminium SKU: 18092700](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-27-teeth-length-160mm-material-aluminium-sku-18092700/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 26 teeth length 160mm material aluminium SKU: 18092600](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-26-teeth-length-160mm-material-aluminium-sku-18092600/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 25 teeth length 160mm material aluminium SKU: 18092500](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-25-teeth-length-160mm-material-aluminium-sku-18092500/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 24 teeth length 160mm material aluminium SKU: 18092400](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-24-teeth-length-160mm-material-aluminium-sku-18092400/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 23 teeth length 160mm material aluminium SKU: 18092300](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-23-teeth-length-160mm-material-aluminium-sku-18092300/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 22 teeth length 160mm material aluminium SKU: 18092200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-22-teeth-length-160mm-material-aluminium-sku-18092200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 21 teeth length 160mm material aluminium SKU: 18092100](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-21-teeth-length-160mm-material-aluminium-sku-18092100/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 20 teeth length 140mm material aluminium SKU: 18092000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-20-teeth-length-140mm-material-aluminium-sku-18092000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 19 teeth length 140mm material aluminium SKU: 18091900](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-19-teeth-length-140mm-material-aluminium-sku-18091900/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 18 teeth length 140mm material aluminium SKU: 18091800](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-18-teeth-length-140mm-material-aluminium-sku-18091800/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 17 teeth length 140mm material aluminium SKU: 18091700](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-17-teeth-length-140mm-material-aluminium-sku-18091700/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 16 teeth length 140mm material aluminium SKU: 18091600](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-16-teeth-length-140mm-material-aluminium-sku-18091600/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 15 teeth length 140mm material aluminium SKU: 18091500](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-15-teeth-length-140mm-material-aluminium-sku-18091500/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 14 teeth length 140mm material aluminium SKU: 18091400](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-14-teeth-length-140mm-material-aluminium-sku-18091400/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 13 teeth length 140mm material aluminium SKU: 18091300](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-13-teeth-length-140mm-material-aluminium-sku-18091300/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 12 teeth length 140mm material aluminium SKU: 18091200](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-12-teeth-length-140mm-material-aluminium-sku-18091200/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 11 teeth length 140mm material aluminium SKU: 18091100](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-11-teeth-length-140mm-material-aluminium-sku-18091100/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [timing bar XL 1/5" (5.08mm) 10 teeth length 140mm material aluminium SKU: 18091000](https://maedler.in/product/timing-bar-xl-1-5-5-08mm-10-teeth-length-140mm-material-aluminium-sku-18091000/): Material: Aluminium similar EN AW2017A. Profile XL = 1/5" = 5.08 mm. - [Fixing plate for timing belts material aluminium XL belt width 037=9.53mm SKU: 18089900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-xl-belt-width-0379-53mm-sku-18089900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 260 XL 130 teeth belt width 037=9.53mm SKU: 18085200](https://maedler.in/product/neoprene-timing-belt-260-xl-130-teeth-belt-width-0379-53mm-sku-18085200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 250 XL 125 teeth belt width 037=9.53mm SKU: 18085000](https://maedler.in/product/neoprene-timing-belt-250-xl-125-teeth-belt-width-0379-53mm-sku-18085000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 XL 120 teeth belt width 037=9.53mm SKU: 18084800](https://maedler.in/product/neoprene-timing-belt-240-xl-120-teeth-belt-width-0379-53mm-sku-18084800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 230 XL 115 teeth belt width 037=9.53mm SKU: 18084600](https://maedler.in/product/neoprene-timing-belt-230-xl-115-teeth-belt-width-0379-53mm-sku-18084600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 220 XL 110 teeth belt width 037=9.53mm SKU: 18084400](https://maedler.in/product/neoprene-timing-belt-220-xl-110-teeth-belt-width-0379-53mm-sku-18084400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 XL 105 teeth belt width 037=9.53mm SKU: 18084200](https://maedler.in/product/neoprene-timing-belt-210-xl-105-teeth-belt-width-0379-53mm-sku-18084200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 XL 100 teeth belt width 037=9.53mm SKU: 18084000](https://maedler.in/product/neoprene-timing-belt-200-xl-100-teeth-belt-width-0379-53mm-sku-18084000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 190 XL 95 teeth belt width 037=9.53mm SKU: 18083800](https://maedler.in/product/neoprene-timing-belt-190-xl-95-teeth-belt-width-0379-53mm-sku-18083800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 180 XL 90 teeth belt width 037=9.53mm SKU: 18083600](https://maedler.in/product/neoprene-timing-belt-180-xl-90-teeth-belt-width-0379-53mm-sku-18083600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 170 XL 85 teeth belt width 037=9.53mm SKU: 18083400](https://maedler.in/product/neoprene-timing-belt-170-xl-85-teeth-belt-width-0379-53mm-sku-18083400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 160 XL 80 teeth belt width 037=9.53mm SKU: 18083200](https://maedler.in/product/neoprene-timing-belt-160-xl-80-teeth-belt-width-0379-53mm-sku-18083200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 XL 75 teeth belt width 037=9.53mm SKU: 18083000](https://maedler.in/product/neoprene-timing-belt-150-xl-75-teeth-belt-width-0379-53mm-sku-18083000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 140 XL 70 teeth belt width 037=9.53mm SKU: 18082800](https://maedler.in/product/neoprene-timing-belt-140-xl-70-teeth-belt-width-0379-53mm-sku-18082800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 130 XL 65 teeth belt width 037=9.53mm SKU: 18082600](https://maedler.in/product/neoprene-timing-belt-130-xl-65-teeth-belt-width-0379-53mm-sku-18082600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 120 XL 60 teeth belt width 037=9.53mm SKU: 18082400](https://maedler.in/product/neoprene-timing-belt-120-xl-60-teeth-belt-width-0379-53mm-sku-18082400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 110 XL 55 teeth belt width 037=9.53mm SKU: 18082200](https://maedler.in/product/neoprene-timing-belt-110-xl-55-teeth-belt-width-0379-53mm-sku-18082200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 100 XL 50 teeth belt width 037=9.53mm SKU: 18082000](https://maedler.in/product/neoprene-timing-belt-100-xl-50-teeth-belt-width-0379-53mm-sku-18082000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 90 XL 45 teeth belt width 037=9.53mm SKU: 18081800](https://maedler.in/product/neoprene-timing-belt-90-xl-45-teeth-belt-width-0379-53mm-sku-18081800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 80 XL 40 teeth belt width 037=9.53mm SKU: 18081600](https://maedler.in/product/neoprene-timing-belt-80-xl-40-teeth-belt-width-0379-53mm-sku-18081600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 70 XL 35 teeth belt width 037=9.53mm SKU: 18081400](https://maedler.in/product/neoprene-timing-belt-70-xl-35-teeth-belt-width-0379-53mm-sku-18081400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 60 XL 30 teeth belt width 037=9.53mm SKU: 18081200](https://maedler.in/product/neoprene-timing-belt-60-xl-30-teeth-belt-width-0379-53mm-sku-18081200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 037 = 9.53 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt XL=1/5" (5.08mm) width 037=9.53mm open length SKU: 18080000](https://maedler.in/product/neoprene-timing-belt-xl1-5-5-08mm-width-0379-53mm-open-length-sku-18080000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium XL belt width 025=6,35mm SKU: 18069900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-xl-belt-width-025635mm-sku-18069900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 260 XL 025 130 teeth Lw 660.4mm belt width 6.35mm SKU: 18065200](https://maedler.in/product/neoprene-timing-belt-260-xl-025-130-teeth-lw-660-4mm-belt-width-6-35mm-sku-18065200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 250 XL 025 125 teeth Lw 635.0mm belt width 6.35mm SKU: 18065000](https://maedler.in/product/neoprene-timing-belt-250-xl-025-125-teeth-lw-635-0mm-belt-width-6-35mm-sku-18065000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile XL = 1/5" = 5.08 mm. Belt width 025 = 6.35 mm. Temperature range -20º to +100ºC. - [Locking assembly COM-D bore 90mm size 90-130 SKU: 61557090](https://maedler.in/product/locking-assembly-com-d-bore-90mm-size-90-130-sku-61557090/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 85mm size 85-125 SKU: 61557085](https://maedler.in/product/locking-assembly-com-d-bore-85mm-size-85-125-sku-61557085/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 80mm size 80-120 SKU: 61557080](https://maedler.in/product/locking-assembly-com-d-bore-80mm-size-80-120-sku-61557080/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 75mm size 75-115 SKU: 61557075](https://maedler.in/product/locking-assembly-com-d-bore-75mm-size-75-115-sku-61557075/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 70mm size 70-110 SKU: 61557070](https://maedler.in/product/locking-assembly-com-d-bore-70mm-size-70-110-sku-61557070/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 65mm size 65-95 SKU: 61557065](https://maedler.in/product/locking-assembly-com-d-bore-65mm-size-65-95-sku-61557065/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 60mm size 60-90 SKU: 61557060](https://maedler.in/product/locking-assembly-com-d-bore-60mm-size-60-90-sku-61557060/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 55mm size 55-85 SKU: 61557055](https://maedler.in/product/locking-assembly-com-d-bore-55mm-size-55-85-sku-61557055/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 50mm size 50-80 SKU: 61557050](https://maedler.in/product/locking-assembly-com-d-bore-50mm-size-50-80-sku-61557050/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 48mm size 48-80 SKU: 61557048](https://maedler.in/product/locking-assembly-com-d-bore-48mm-size-48-80-sku-61557048/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 45mm size 45-75 SKU: 61557045](https://maedler.in/product/locking-assembly-com-d-bore-45mm-size-45-75-sku-61557045/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 42mm size 42-75 SKU: 61557042](https://maedler.in/product/locking-assembly-com-d-bore-42mm-size-42-75-sku-61557042/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 40mm size 40-65 SKU: 61557040](https://maedler.in/product/locking-assembly-com-d-bore-40mm-size-40-65-sku-61557040/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 38mm size 38-65 SKU: 61557038](https://maedler.in/product/locking-assembly-com-d-bore-38mm-size-38-65-sku-61557038/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 35mm size 35-60 SKU: 61557035](https://maedler.in/product/locking-assembly-com-d-bore-35mm-size-35-60-sku-61557035/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 32mm size 32-60 SKU: 61557032](https://maedler.in/product/locking-assembly-com-d-bore-32mm-size-32-60-sku-61557032/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 30mm size 30-55 SKU: 61557030](https://maedler.in/product/locking-assembly-com-d-bore-30mm-size-30-55-sku-61557030/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 28mm size 28-55 SKU: 61557028](https://maedler.in/product/locking-assembly-com-d-bore-28mm-size-28-55-sku-61557028/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 25mm size 25-50 SKU: 61557025](https://maedler.in/product/locking-assembly-com-d-bore-25mm-size-25-50-sku-61557025/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 24mm size 24-50 SKU: 61557024](https://maedler.in/product/locking-assembly-com-d-bore-24mm-size-24-50-sku-61557024/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 22mm size 22-47 SKU: 61557022](https://maedler.in/product/locking-assembly-com-d-bore-22mm-size-22-47-sku-61557022/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 20mm size 20-47 SKU: 61557020](https://maedler.in/product/locking-assembly-com-d-bore-20mm-size-20-47-sku-61557020/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 19mm size 19-47 SKU: 61557019](https://maedler.in/product/locking-assembly-com-d-bore-19mm-size-19-47-sku-61557019/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-A bore 55mm size 55-85 SKU: 61555500](https://maedler.in/product/locking-assembly-com-a-bore-55mm-size-55-85-sku-61555500/): Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A bore 50mm size 50-80 SKU: 61555000](https://maedler.in/product/locking-assembly-com-a-bore-50mm-size-50-80-sku-61555000/): Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A bore 42mm size 42-75 SKU: 61554200](https://maedler.in/product/locking-assembly-com-a-bore-42mm-size-42-75-sku-61554200/): Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A bore 40mm size 40-65 SKU: 61554000](https://maedler.in/product/locking-assembly-com-a-bore-40mm-size-40-65-sku-61554000/): Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A bore 38mm size 38-65 SKU: 61553800](https://maedler.in/product/locking-assembly-com-a-bore-38mm-size-38-65-sku-61553800/): Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A bore 35mm size 35-60 SKU: 61553500](https://maedler.in/product/locking-assembly-com-a-bore-35mm-size-35-60-sku-61553500/): Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A bore 28mm size 28-55 SKU: 61552800](https://maedler.in/product/locking-assembly-com-a-bore-28mm-size-28-55-sku-61552800/): Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A bore 18mm size 18-47 SKU: 61551800](https://maedler.in/product/locking-assembly-com-a-bore-18mm-size-18-47-sku-61551800/): Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A bore 16mm size 16-44 SKU: 61551600](https://maedler.in/product/locking-assembly-com-a-bore-16mm-size-16-44-sku-61551600/): Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-LL bore 100mm size 100x145x100mm SKU: 61551399](https://maedler.in/product/locking-assembly-com-ll-bore-100mm-size-100x145x100mm-sku-61551399/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 95mm size 95x135x78mm SKU: 61551395](https://maedler.in/product/locking-assembly-com-ll-bore-95mm-size-95x135x78mm-sku-61551395/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 90mm size 90x130x78mm SKU: 61551390](https://maedler.in/product/locking-assembly-com-ll-bore-90mm-size-90x130x78mm-sku-61551390/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 85mm size 85x125x78mm SKU: 61551385](https://maedler.in/product/locking-assembly-com-ll-bore-85mm-size-85x125x78mm-sku-61551385/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 80mm size 80x120x78mm SKU: 61551380](https://maedler.in/product/locking-assembly-com-ll-bore-80mm-size-80x120x78mm-sku-61551380/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 75mm size 75x115x78mm SKU: 61551375](https://maedler.in/product/locking-assembly-com-ll-bore-75mm-size-75x115x78mm-sku-61551375/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 70mm size 70x110x78mm SKU: 61551370](https://maedler.in/product/locking-assembly-com-ll-bore-70mm-size-70x110x78mm-sku-61551370/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 65mm size 65x95x64mm SKU: 61551365](https://maedler.in/product/locking-assembly-com-ll-bore-65mm-size-65x95x64mm-sku-61551365/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 60mm size 60x90x64mm SKU: 61551360](https://maedler.in/product/locking-assembly-com-ll-bore-60mm-size-60x90x64mm-sku-61551360/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 55mm size 55x85x64mm SKU: 61551355](https://maedler.in/product/locking-assembly-com-ll-bore-55mm-size-55x85x64mm-sku-61551355/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 50mm size 50x80x64mm SKU: 61551350](https://maedler.in/product/locking-assembly-com-ll-bore-50mm-size-50x80x64mm-sku-61551350/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 48mm size 48x80x64mm SKU: 61551348](https://maedler.in/product/locking-assembly-com-ll-bore-48mm-size-48x80x64mm-sku-61551348/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 45mm size 45x75x64mm SKU: 61551345](https://maedler.in/product/locking-assembly-com-ll-bore-45mm-size-45x75x64mm-sku-61551345/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 42mm size 42x75x64mm SKU: 61551342](https://maedler.in/product/locking-assembly-com-ll-bore-42mm-size-42x75x64mm-sku-61551342/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 40mm size 40x65x45mm SKU: 61551340](https://maedler.in/product/locking-assembly-com-ll-bore-40mm-size-40x65x45mm-sku-61551340/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 38mm size 38x65x45mm SKU: 61551338](https://maedler.in/product/locking-assembly-com-ll-bore-38mm-size-38x65x45mm-sku-61551338/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 35mm size 35x60x45mm SKU: 61551335](https://maedler.in/product/locking-assembly-com-ll-bore-35mm-size-35x60x45mm-sku-61551335/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 30mm size 30x55x45mm SKU: 61551330](https://maedler.in/product/locking-assembly-com-ll-bore-30mm-size-30x55x45mm-sku-61551330/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 28mm size 28x55x45mm SKU: 61551328](https://maedler.in/product/locking-assembly-com-ll-bore-28mm-size-28x55x45mm-sku-61551328/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-LL bore 25mm size 25x50x45mm SKU: 61551325](https://maedler.in/product/locking-assembly-com-ll-bore-25mm-size-25x50x45mm-sku-61551325/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For very high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12,5 µm.More sizes up to d=300mm for 524,000Nm are available.Price and delivery time on request. - [Locking assembly COM-L bore 100mm size 100-145 QPQ-coatet SKU: 61551200Q](https://maedler.in/product/locking-assembly-com-l-bore-100mm-size-100-145-qpq-coatet-sku-61551200q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 100mm size 100-145 SKU: 61551200](https://maedler.in/product/locking-assembly-com-l-bore-100mm-size-100-145-sku-61551200/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 95mm size 95-135 QPQ-coatet SKU: 61551195Q](https://maedler.in/product/locking-assembly-com-l-bore-95mm-size-95-135-qpq-coatet-sku-61551195q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 95mm size 95-135 SKU: 61551195](https://maedler.in/product/locking-assembly-com-l-bore-95mm-size-95-135-sku-61551195/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 90mm size 90-130 QPQ-coatet SKU: 61551190Q](https://maedler.in/product/locking-assembly-com-l-bore-90mm-size-90-130-qpq-coatet-sku-61551190q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 90mm size 90-130 SKU: 61551190](https://maedler.in/product/locking-assembly-com-l-bore-90mm-size-90-130-sku-61551190/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 85mm size 85-125 QPQ-coatet SKU: 61551185Q](https://maedler.in/product/locking-assembly-com-l-bore-85mm-size-85-125-qpq-coatet-sku-61551185q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 85mm size 85-125 SKU: 61551185](https://maedler.in/product/locking-assembly-com-l-bore-85mm-size-85-125-sku-61551185/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 80mm size 80-120 QPQ-coatet SKU: 61551180Q](https://maedler.in/product/locking-assembly-com-l-bore-80mm-size-80-120-qpq-coatet-sku-61551180q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 80mm size 80-120 SKU: 61551180](https://maedler.in/product/locking-assembly-com-l-bore-80mm-size-80-120-sku-61551180/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 75mm size 75-115 QPQ-coatet SKU: 61551175Q](https://maedler.in/product/locking-assembly-com-l-bore-75mm-size-75-115-qpq-coatet-sku-61551175q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 75mm size 75-115 SKU: 61551175](https://maedler.in/product/locking-assembly-com-l-bore-75mm-size-75-115-sku-61551175/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 70mm size 70-110 QPQ-coatet SKU: 61551170Q](https://maedler.in/product/locking-assembly-com-l-bore-70mm-size-70-110-qpq-coatet-sku-61551170q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 70mm size 70-110 SKU: 61551170](https://maedler.in/product/locking-assembly-com-l-bore-70mm-size-70-110-sku-61551170/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 65mm size 65-95 QPQ-coatet SKU: 61551165Q](https://maedler.in/product/locking-assembly-com-l-bore-65mm-size-65-95-qpq-coatet-sku-61551165q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 65mm size 65-95 SKU: 61551165](https://maedler.in/product/locking-assembly-com-l-bore-65mm-size-65-95-sku-61551165/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 60mm size 60-90 QPQ-coatet SKU: 61551160Q](https://maedler.in/product/locking-assembly-com-l-bore-60mm-size-60-90-qpq-coatet-sku-61551160q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 60mm size 60-90 SKU: 61551160](https://maedler.in/product/locking-assembly-com-l-bore-60mm-size-60-90-sku-61551160/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 55mm size 55-85 QPQ-coatet SKU: 61551155Q](https://maedler.in/product/locking-assembly-com-l-bore-55mm-size-55-85-qpq-coatet-sku-61551155q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 55mm size 55-85 SKU: 61551155](https://maedler.in/product/locking-assembly-com-l-bore-55mm-size-55-85-sku-61551155/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 50mm size 50-80 QPQ-coatet SKU: 61551150Q](https://maedler.in/product/locking-assembly-com-l-bore-50mm-size-50-80-qpq-coatet-sku-61551150q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 50mm size 50-80 SKU: 61551150](https://maedler.in/product/locking-assembly-com-l-bore-50mm-size-50-80-sku-61551150/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 48mm size 48-80 QPQ-coatet SKU: 61551148Q](https://maedler.in/product/locking-assembly-com-l-bore-48mm-size-48-80-qpq-coatet-sku-61551148q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 48mm size 48-80 SKU: 61551148](https://maedler.in/product/locking-assembly-com-l-bore-48mm-size-48-80-sku-61551148/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 45mm size 45-75 QPQ-coatet SKU: 61551145Q](https://maedler.in/product/locking-assembly-com-l-bore-45mm-size-45-75-qpq-coatet-sku-61551145q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 45mm size 45-75 SKU: 61551145](https://maedler.in/product/locking-assembly-com-l-bore-45mm-size-45-75-sku-61551145/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 42mm size 42-75 QPQ-coatet SKU: 61551142Q](https://maedler.in/product/locking-assembly-com-l-bore-42mm-size-42-75-qpq-coatet-sku-61551142q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 42mm size 42-75 SKU: 61551142](https://maedler.in/product/locking-assembly-com-l-bore-42mm-size-42-75-sku-61551142/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 40mm size 40-75 QPQ-coatet SKU: 61551140Q](https://maedler.in/product/locking-assembly-com-l-bore-40mm-size-40-75-qpq-coatet-sku-61551140q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 40mm size 40-75 SKU: 61551140](https://maedler.in/product/locking-assembly-com-l-bore-40mm-size-40-75-sku-61551140/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 38mm size 38-75 QPQ-coatet SKU: 61551138Q](https://maedler.in/product/locking-assembly-com-l-bore-38mm-size-38-75-qpq-coatet-sku-61551138q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 38mm size 38-75 SKU: 61551138](https://maedler.in/product/locking-assembly-com-l-bore-38mm-size-38-75-sku-61551138/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 35mm size 35-60 QPQ-coatet SKU: 61551135Q](https://maedler.in/product/locking-assembly-com-l-bore-35mm-size-35-60-qpq-coatet-sku-61551135q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 35mm size 35-60 SKU: 61551135](https://maedler.in/product/locking-assembly-com-l-bore-35mm-size-35-60-sku-61551135/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 30mm size 30-55 QPQ-coatet SKU: 61551130Q](https://maedler.in/product/locking-assembly-com-l-bore-30mm-size-30-55-qpq-coatet-sku-61551130q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 30mm size 30-55 SKU: 61551130](https://maedler.in/product/locking-assembly-com-l-bore-30mm-size-30-55-sku-61551130/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 28mm size 28-55 QPQ-coatet SKU: 61551128Q](https://maedler.in/product/locking-assembly-com-l-bore-28mm-size-28-55-qpq-coatet-sku-61551128q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 28mm size 28-55 SKU: 61551128](https://maedler.in/product/locking-assembly-com-l-bore-28mm-size-28-55-sku-61551128/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 25mm size 25-55 QPQ-coatet SKU: 61551125Q](https://maedler.in/product/locking-assembly-com-l-bore-25mm-size-25-55-qpq-coatet-sku-61551125q/): Material: Steel, QPQ-Coated. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-L bore 25mm size 25-55 SKU: 61551125](https://maedler.in/product/locking-assembly-com-l-bore-25mm-size-25-55-sku-61551125/): Material: Steel. For fixing a hub (e.g. drive wheel,rotor or similar) on a shaft. For very high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [locking assembly TOK type A bore 50mm steel SKU: 61550350](https://maedler.in/product/locking-assembly-tok-type-a-bore-50mm-steel-sku-61550350/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 48mm steel SKU: 61550348](https://maedler.in/product/locking-assembly-tok-type-a-bore-48mm-steel-sku-61550348/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 45mm steel SKU: 61550345](https://maedler.in/product/locking-assembly-tok-type-a-bore-45mm-steel-sku-61550345/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 42mm steel SKU: 61550342](https://maedler.in/product/locking-assembly-tok-type-a-bore-42mm-steel-sku-61550342/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 40mm steel SKU: 61550340](https://maedler.in/product/locking-assembly-tok-type-a-bore-40mm-steel-sku-61550340/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 38mm steel SKU: 61550338](https://maedler.in/product/locking-assembly-tok-type-a-bore-38mm-steel-sku-61550338/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 35mm steel SKU: 61550335](https://maedler.in/product/locking-assembly-tok-type-a-bore-35mm-steel-sku-61550335/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [locking assembly TOK type A bore 32mm steel SKU: 61550332](https://maedler.in/product/locking-assembly-tok-type-a-bore-32mm-steel-sku-61550332/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Self-centering.Axial offset during mounting (can be compensated by correct positioning). - [Timing belt pulley L material steel 14 teeth for belt width 075=19.1mm SKU: 18221400](https://maedler.in/product/timing-belt-pulley-l-material-steel-14-teeth-for-belt-width-07519-1mm-sku-18221400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 13 teeth for belt width 075=19.1mm SKU: 18221300](https://maedler.in/product/timing-belt-pulley-l-material-steel-13-teeth-for-belt-width-07519-1mm-sku-18221300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 12 teeth for belt width 075=19.1mm SKU: 18221200](https://maedler.in/product/timing-belt-pulley-l-material-steel-12-teeth-for-belt-width-07519-1mm-sku-18221200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 11 teeth for belt width 075=19.1mm SKU: 18221100](https://maedler.in/product/timing-belt-pulley-l-material-steel-11-teeth-for-belt-width-07519-1mm-sku-18221100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 10 teeth for belt width 075=19.1mm SKU: 18221000](https://maedler.in/product/timing-belt-pulley-l-material-steel-10-teeth-for-belt-width-07519-1mm-sku-18221000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 96 teeth for belt width 050=12.7mm SKU: 18218700](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-96-teeth-for-belt-width-05012-7mm-sku-18218700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 84 teeth for belt width 050=12.7mm SKU: 18218400](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-84-teeth-for-belt-width-05012-7mm-sku-18218400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 72 teeth for belt width 050=12.7mm SKU: 18217200](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-72-teeth-for-belt-width-05012-7mm-sku-18217200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 60 teeth for belt width 050=12.7mm SKU: 18216000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-60-teeth-for-belt-width-05012-7mm-sku-18216000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 56 teeth for belt width 050=12.7mm SKU: 18215600](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-56-teeth-for-belt-width-05012-7mm-sku-18215600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material grey cast iron 50 teeth for belt width 050=12.7mm SKU: 18215000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-50-teeth-for-belt-width-05012-7mm-sku-18215000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 48 teeth for belt width 050=12.7mm SKU: 18214800](https://maedler.in/product/timing-belt-pulley-l-material-steel-48-teeth-for-belt-width-05012-7mm-sku-18214800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 44 teeth for belt width 050=12.7mm SKU: 18214400](https://maedler.in/product/timing-belt-pulley-l-material-steel-44-teeth-for-belt-width-05012-7mm-sku-18214400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 40 teeth for belt width 050=12.7mm SKU: 18214000](https://maedler.in/product/timing-belt-pulley-l-material-steel-40-teeth-for-belt-width-05012-7mm-sku-18214000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 36 teeth for belt width 050=12.7mm SKU: 18213600](https://maedler.in/product/timing-belt-pulley-l-material-steel-36-teeth-for-belt-width-05012-7mm-sku-18213600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 35 teeth for belt width 050=12.7mm SKU: 18213500](https://maedler.in/product/timing-belt-pulley-l-material-steel-35-teeth-for-belt-width-05012-7mm-sku-18213500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 34 teeth for belt width 050=12.7mm SKU: 18213400](https://maedler.in/product/timing-belt-pulley-l-material-steel-34-teeth-for-belt-width-05012-7mm-sku-18213400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 33 teeth for belt width 050=12.7mm SKU: 18213300](https://maedler.in/product/timing-belt-pulley-l-material-steel-33-teeth-for-belt-width-05012-7mm-sku-18213300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 32 teeth for belt width 050=12.7mm SKU: 18213200](https://maedler.in/product/timing-belt-pulley-l-material-steel-32-teeth-for-belt-width-05012-7mm-sku-18213200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 30 teeth for belt width 050=12.7mm SKU: 18213000](https://maedler.in/product/timing-belt-pulley-l-material-steel-30-teeth-for-belt-width-05012-7mm-sku-18213000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 28 teeth for belt width 050=12.7mm SKU: 18212800](https://maedler.in/product/timing-belt-pulley-l-material-steel-28-teeth-for-belt-width-05012-7mm-sku-18212800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 27 teeth for belt width 050=12.7mm SKU: 18212700](https://maedler.in/product/timing-belt-pulley-l-material-steel-27-teeth-for-belt-width-05012-7mm-sku-18212700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 26 teeth for belt width 050=12.7mm SKU: 18212600](https://maedler.in/product/timing-belt-pulley-l-material-steel-26-teeth-for-belt-width-05012-7mm-sku-18212600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 25 teeth for belt width 050=12.7mm SKU: 18212500](https://maedler.in/product/timing-belt-pulley-l-material-steel-25-teeth-for-belt-width-05012-7mm-sku-18212500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 24 teeth for belt width 050=12.7mm SKU: 18212400](https://maedler.in/product/timing-belt-pulley-l-material-steel-24-teeth-for-belt-width-05012-7mm-sku-18212400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 23 teeth for belt width 050=12.7mm SKU: 18212300](https://maedler.in/product/timing-belt-pulley-l-material-steel-23-teeth-for-belt-width-05012-7mm-sku-18212300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 22 teeth for belt width 050=12.7mm SKU: 18212200](https://maedler.in/product/timing-belt-pulley-l-material-steel-22-teeth-for-belt-width-05012-7mm-sku-18212200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 21 teeth for belt width 050=12.7mm SKU: 18212100](https://maedler.in/product/timing-belt-pulley-l-material-steel-21-teeth-for-belt-width-05012-7mm-sku-18212100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 20 teeth for belt width 050=12.7mm SKU: 18212000](https://maedler.in/product/timing-belt-pulley-l-material-steel-20-teeth-for-belt-width-05012-7mm-sku-18212000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 19 teeth for belt width 050=12.7mm SKU: 18211900](https://maedler.in/product/timing-belt-pulley-l-material-steel-19-teeth-for-belt-width-05012-7mm-sku-18211900/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 18 teeth for belt width 050=12.7mm SKU: 18211800](https://maedler.in/product/timing-belt-pulley-l-material-steel-18-teeth-for-belt-width-05012-7mm-sku-18211800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 17 teeth for belt width 050=12.7mm SKU: 18211700](https://maedler.in/product/timing-belt-pulley-l-material-steel-17-teeth-for-belt-width-05012-7mm-sku-18211700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 16 teeth for belt width 050=12.7mm SKU: 18211600](https://maedler.in/product/timing-belt-pulley-l-material-steel-16-teeth-for-belt-width-05012-7mm-sku-18211600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 15 teeth for belt width 050=12.7mm SKU: 18211500](https://maedler.in/product/timing-belt-pulley-l-material-steel-15-teeth-for-belt-width-05012-7mm-sku-18211500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 14 teeth for belt width 050=12.7mm SKU: 18211400](https://maedler.in/product/timing-belt-pulley-l-material-steel-14-teeth-for-belt-width-05012-7mm-sku-18211400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 13 teeth for belt width 050=12.7mm SKU: 18211300](https://maedler.in/product/timing-belt-pulley-l-material-steel-13-teeth-for-belt-width-05012-7mm-sku-18211300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 12 teeth for belt width 050=12.7mm SKU: 18211200](https://maedler.in/product/timing-belt-pulley-l-material-steel-12-teeth-for-belt-width-05012-7mm-sku-18211200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 11 teeth for belt width 050=12.7mm SKU: 18211100](https://maedler.in/product/timing-belt-pulley-l-material-steel-11-teeth-for-belt-width-05012-7mm-sku-18211100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [Timing belt pulley L material steel 10 teeth for belt width 050=12.7mm SKU: 18211000](https://maedler.in/product/timing-belt-pulley-l-material-steel-10-teeth-for-belt-width-05012-7mm-sku-18211000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. - [timing bar MXL 0.080" (2.03mm) 72 teeth length 160mm material aluminium SKU: 18197200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-72-teeth-length-160mm-material-aluminium-sku-18197200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 70 teeth length 160mm material aluminium SKU: 18197000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-70-teeth-length-160mm-material-aluminium-sku-18197000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 60 teeth length 160mm material aluminium SKU: 18196000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-60-teeth-length-160mm-material-aluminium-sku-18196000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 50 teeth length 140mm material aluminium SKU: 18195000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-50-teeth-length-140mm-material-aluminium-sku-18195000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 48 teeth length 140mm material aluminium SKU: 18194800](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-48-teeth-length-140mm-material-aluminium-sku-18194800/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 45 teeth length 140mm material aluminium SKU: 18194500](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-45-teeth-length-140mm-material-aluminium-sku-18194500/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 44 teeth length 140mm material aluminium SKU: 18194400](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-44-teeth-length-140mm-material-aluminium-sku-18194400/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 42 teeth length 140mm material aluminium SKU: 18194200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-42-teeth-length-140mm-material-aluminium-sku-18194200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 40 teeth length 140mm material aluminium SKU: 18194000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-40-teeth-length-140mm-material-aluminium-sku-18194000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 36 teeth length 140mm material aluminium SKU: 18193600](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-36-teeth-length-140mm-material-aluminium-sku-18193600/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 34 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18193400](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-34-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18193400/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 32 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18193200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-32-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18193200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 30 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18193000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-30-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18193000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 28 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192800](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-28-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192800/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 26 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192600](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-26-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192600/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 25 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192500](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-25-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192500/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 24 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192400](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-24-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192400/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 22 teeth toothed length min. 125mm total length 140mm material aluminium SKU: 18192200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-22-teeth-toothed-length-min-125mm-total-length-140mm-material-aluminium-sku-18192200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 20 teeth toothed length min. 90mm total length 120mm material aluminium SKU: 18192000](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-20-teeth-toothed-length-min-90mm-total-length-120mm-material-aluminium-sku-18192000/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 18 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191800](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-18-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191800/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 16 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191600](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-16-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191600/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 15 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191500](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-15-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191500/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 14 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191400](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-14-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191400/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [timing bar MXL 0.080" (2.03mm) 12 teeth toothed length min. 50mm total length 75mm material aluminium SKU: 18191200](https://maedler.in/product/timing-bar-mxl-0-080-2-03mm-12-teeth-toothed-length-min-50mm-total-length-75mm-material-aluminium-sku-18191200/): Material: Aluminium ähnlich EN AW2017A.Profile MXL = 0,08" = 2.032 mm. - [Neoprene timing belt 256 MXL 320 teeth Lw 650.24mm belt width 025 SKU: 18189500](https://maedler.in/product/neoprene-timing-belt-256-mxl-320-teeth-lw-650-24mm-belt-width-025-sku-18189500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 MXL 300 teeth Lw 609.60mm belt width 025 SKU: 18189000](https://maedler.in/product/neoprene-timing-belt-240-mxl-300-teeth-lw-609-60mm-belt-width-025-sku-18189000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 224 MXL 280 teeth Lw 568.96mm belt width 025 SKU: 18188500](https://maedler.in/product/neoprene-timing-belt-224-mxl-280-teeth-lw-568-96mm-belt-width-025-sku-18188500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 MXL 250 teeth Lw 508.00mm belt width 025 SKU: 18188000](https://maedler.in/product/neoprene-timing-belt-200-mxl-250-teeth-lw-508-00mm-belt-width-025-sku-18188000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 180 MXL 225 teeth Lw 457.20mm belt width 025 SKU: 18187500](https://maedler.in/product/neoprene-timing-belt-180-mxl-225-teeth-lw-457-20mm-belt-width-025-sku-18187500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 160 MXL 200 teeth Lw 406.40mm belt width 025 SKU: 18187000](https://maedler.in/product/neoprene-timing-belt-160-mxl-200-teeth-lw-406-40mm-belt-width-025-sku-18187000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 140 MXL 175 teeth Lw 355.60mm belt width 025 SKU: 18186500](https://maedler.in/product/neoprene-timing-belt-140-mxl-175-teeth-lw-355-60mm-belt-width-025-sku-18186500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 MXL 155 teeth Lw 314.96mm belt width 025 SKU: 18186000](https://maedler.in/product/neoprene-timing-belt-124-mxl-155-teeth-lw-314-96mm-belt-width-025-sku-18186000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 112 MXL 140 teeth Lw 284.48mm belt width 025 SKU: 18185500](https://maedler.in/product/neoprene-timing-belt-112-mxl-140-teeth-lw-284-48mm-belt-width-025-sku-18185500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 100 MXL 125 teeth Lw 254.00mm belt width 025 SKU: 18185000](https://maedler.in/product/neoprene-timing-belt-100-mxl-125-teeth-lw-254-00mm-belt-width-025-sku-18185000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 88 MXL 110 teeth Lw 223.52mm belt width 025 SKU: 18184500](https://maedler.in/product/neoprene-timing-belt-88-mxl-110-teeth-lw-223-52mm-belt-width-025-sku-18184500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 80 MXL 100 teeth Lw 203.20mm belt width 025 SKU: 18184000](https://maedler.in/product/neoprene-timing-belt-80-mxl-100-teeth-lw-203-20mm-belt-width-025-sku-18184000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 72 MXL 90 teeth Lw 182.88mm belt width 025 SKU: 18183500](https://maedler.in/product/neoprene-timing-belt-72-mxl-90-teeth-lw-182-88mm-belt-width-025-sku-18183500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 68 MXL 85 teeth Lw 172.72mm belt width 025 SKU: 18183200](https://maedler.in/product/neoprene-timing-belt-68-mxl-85-teeth-lw-172-72mm-belt-width-025-sku-18183200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 64 MXL 80 teeth Lw 162.56mm belt width 025 SKU: 18183000](https://maedler.in/product/neoprene-timing-belt-64-mxl-80-teeth-lw-162-56mm-belt-width-025-sku-18183000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 60 MXL 75 teeth Lw 152.40mm belt width 025 SKU: 18182500](https://maedler.in/product/neoprene-timing-belt-60-mxl-75-teeth-lw-152-40mm-belt-width-025-sku-18182500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 56 MXL 70 teeth Lw 142.24mm belt width 025 SKU: 18182000](https://maedler.in/product/neoprene-timing-belt-56-mxl-70-teeth-lw-142-24mm-belt-width-025-sku-18182000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 52 MXL 65 teeth Lw 132.08mm belt width 025 SKU: 18181500](https://maedler.in/product/neoprene-timing-belt-52-mxl-65-teeth-lw-132-08mm-belt-width-025-sku-18181500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 48 MXL 60 teeth Lw 121.92mm belt width 025 SKU: 18181000](https://maedler.in/product/neoprene-timing-belt-48-mxl-60-teeth-lw-121-92mm-belt-width-025-sku-18181000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 44 MXL 55 teeth Lw 111.76mm belt width 025 SKU: 18180700](https://maedler.in/product/neoprene-timing-belt-44-mxl-55-teeth-lw-111-76mm-belt-width-025-sku-18180700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 40 MXL 50 teeth Lw 101.60mm belt width 025 SKU: 18180400](https://maedler.in/product/neoprene-timing-belt-40-mxl-50-teeth-lw-101-60mm-belt-width-025-sku-18180400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 36 MXL 45 teeth Lw 91. 44mm belt width 025 SKU: 18180200](https://maedler.in/product/neoprene-timing-belt-36-mxl-45-teeth-lw-91-44mm-belt-width-025-sku-18180200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 025 = 6.35mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 256 MXL 012 320 teeth Lw 650.24mm belt width 3.2mm SKU: 18169500](https://maedler.in/product/neoprene-timing-belt-256-mxl-012-320-teeth-lw-650-24mm-belt-width-3-2mm-sku-18169500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 MXL 012 300 teeth Lw 609.60mm belt width 3.2mm SKU: 18169000](https://maedler.in/product/neoprene-timing-belt-240-mxl-012-300-teeth-lw-609-60mm-belt-width-3-2mm-sku-18169000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 MXL 012 280 teeth Lw 568.96mm belt width 3.2mm SKU: 18168500](https://maedler.in/product/neoprene-timing-belt-200-mxl-012-280-teeth-lw-568-96mm-belt-width-3-2mm-sku-18168500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 200 MXL 012 250 teeth Lw 508.00mm belt width 3.2mm SKU: 18168000](https://maedler.in/product/neoprene-timing-belt-200-mxl-012-250-teeth-lw-508-00mm-belt-width-3-2mm-sku-18168000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 180 MXL 012 225 teeth Lw 457.20mm belt width 3.2mm SKU: 18167500](https://maedler.in/product/neoprene-timing-belt-180-mxl-012-225-teeth-lw-457-20mm-belt-width-3-2mm-sku-18167500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 160 MXL 012 200 teeth Lw 406.40mm belt width 3.2mm SKU: 18167000](https://maedler.in/product/neoprene-timing-belt-160-mxl-012-200-teeth-lw-406-40mm-belt-width-3-2mm-sku-18167000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 140 MXL 012 175 teeth Lw 355.60mm belt width 3.2mm SKU: 18166500](https://maedler.in/product/neoprene-timing-belt-140-mxl-012-175-teeth-lw-355-60mm-belt-width-3-2mm-sku-18166500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 MXL 012 155 teeth Lw 314.96mm belt width 3.2mm SKU: 18166000](https://maedler.in/product/neoprene-timing-belt-124-mxl-012-155-teeth-lw-314-96mm-belt-width-3-2mm-sku-18166000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 112 MXL 012 140 teeth Lw 284.48mm belt width 3.2mm SKU: 18165500](https://maedler.in/product/neoprene-timing-belt-112-mxl-012-140-teeth-lw-284-48mm-belt-width-3-2mm-sku-18165500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 100 MXL 012 125 teeth Lw 254.00mm belt width 3.2mm SKU: 18165000](https://maedler.in/product/neoprene-timing-belt-100-mxl-012-125-teeth-lw-254-00mm-belt-width-3-2mm-sku-18165000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 88 MXL 012 110 teeth Lw 223.52mm belt width 3.2mm SKU: 18164500](https://maedler.in/product/neoprene-timing-belt-88-mxl-012-110-teeth-lw-223-52mm-belt-width-3-2mm-sku-18164500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 80 MXL 012 100 teeth Lw 203.20mm belt width 3.2mm SKU: 18164000](https://maedler.in/product/neoprene-timing-belt-80-mxl-012-100-teeth-lw-203-20mm-belt-width-3-2mm-sku-18164000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 72 MXL 012 90 teeth Lw 182.88mm belt width 3.2mm SKU: 18163500](https://maedler.in/product/neoprene-timing-belt-72-mxl-012-90-teeth-lw-182-88mm-belt-width-3-2mm-sku-18163500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 68 MXL 012 85 teeth Lw 172.72mm belt width 3.2mm SKU: 18163200](https://maedler.in/product/neoprene-timing-belt-68-mxl-012-85-teeth-lw-172-72mm-belt-width-3-2mm-sku-18163200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 64 MXL 012 80 teeth Lw 162.56mm belt width 3.2mm SKU: 18163000](https://maedler.in/product/neoprene-timing-belt-64-mxl-012-80-teeth-lw-162-56mm-belt-width-3-2mm-sku-18163000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile MXL = 0,08" = 2.032 mm. Belt width 012 = 3.2mm. Temperature range -20º to +100ºC. - [Locking assembly COM-CB3 heavy series bore 32mm size 32x80x33mm SKU: 61557932](https://maedler.in/product/locking-assembly-com-cb3-heavy-series-bore-32mm-size-32x80x33mm-sku-61557932/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 heavy series bore 30mm size 30x80x33mm SKU: 61557930](https://maedler.in/product/locking-assembly-com-cb3-heavy-series-bore-30mm-size-30x80x33mm-sku-61557930/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 medium series bore 40mm size 40x65x30mm SKU: 61557840](https://maedler.in/product/locking-assembly-com-cb3-medium-series-bore-40mm-size-40x65x30mm-sku-61557840/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 medium series bore 38mm size 38x65x30mm SKU: 61557838](https://maedler.in/product/locking-assembly-com-cb3-medium-series-bore-38mm-size-38x65x30mm-sku-61557838/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 medium series bore 35mm size 35x65x30mm SKU: 61557835](https://maedler.in/product/locking-assembly-com-cb3-medium-series-bore-35mm-size-35x65x30mm-sku-61557835/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 medium series bore 32mm size 32x65x30mm SKU: 61557832](https://maedler.in/product/locking-assembly-com-cb3-medium-series-bore-32mm-size-32x65x30mm-sku-61557832/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 medium series bore 30mm size 30x65x30mm SKU: 61557830](https://maedler.in/product/locking-assembly-com-cb3-medium-series-bore-30mm-size-30x65x30mm-sku-61557830/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 medium series bore 28mm size 28x65x30mm SKU: 61557828](https://maedler.in/product/locking-assembly-com-cb3-medium-series-bore-28mm-size-28x65x30mm-sku-61557828/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 medium series bore 25mm size 25x65x30mm SKU: 61557825](https://maedler.in/product/locking-assembly-com-cb3-medium-series-bore-25mm-size-25x65x30mm-sku-61557825/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 medium series bore 24mm size 24x65x30mm SKU: 61557824](https://maedler.in/product/locking-assembly-com-cb3-medium-series-bore-24mm-size-24x65x30mm-sku-61557824/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 30mm size 30x55x30mm SKU: 61557730](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-30mm-size-30x55x30mm-sku-61557730/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 28mm size 28x55x30mm SKU: 61557728](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-28mm-size-28x55x30mm-sku-61557728/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 25mm size 25x55x30mm SKU: 61557725](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-25mm-size-25x55x30mm-sku-61557725/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 24mm size 24x55x30mm SKU: 61557724](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-24mm-size-24x55x30mm-sku-61557724/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 22mm size 22x55x30mm SKU: 61557722](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-22mm-size-22x55x30mm-sku-61557722/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 20mm size 20x55x30mm SKU: 61557720](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-20mm-size-20x55x30mm-sku-61557720/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 19mm size 19x55x30mm SKU: 61557719](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-19mm-size-19x55x30mm-sku-61557719/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 18mm size 18x55x30mm SKU: 61557718](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-18mm-size-18x55x30mm-sku-61557718/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 16mm size 16x55x30mm SKU: 61557716](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-16mm-size-16x55x30mm-sku-61557716/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB3 light series bore 14mm size 14x55x30mm SKU: 61557714](https://maedler.in/product/locking-assembly-com-cb3-light-series-bore-14mm-size-14x55x30mm-sku-61557714/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.3 Ranges of sizes, for middle, higher and very high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12,5 µm. - [Locking assembly COM-CB2 bore 100mm size 100x145x44mm SKU: 61557600](https://maedler.in/product/locking-assembly-com-cb2-bore-100mm-size-100x145x44mm-sku-61557600/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 95mm size 95x135x40mm SKU: 61557595](https://maedler.in/product/locking-assembly-com-cb2-bore-95mm-size-95x135x40mm-sku-61557595/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 90mm size 90x130x40mm SKU: 61557590](https://maedler.in/product/locking-assembly-com-cb2-bore-90mm-size-90x130x40mm-sku-61557590/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 85mm size 85x125x40mm SKU: 61557585](https://maedler.in/product/locking-assembly-com-cb2-bore-85mm-size-85x125x40mm-sku-61557585/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 80mm size 80x120x40mm SKU: 61557580](https://maedler.in/product/locking-assembly-com-cb2-bore-80mm-size-80x120x40mm-sku-61557580/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 75mm size 75x115x40mm SKU: 61557575](https://maedler.in/product/locking-assembly-com-cb2-bore-75mm-size-75x115x40mm-sku-61557575/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 70mm size 70x110x40mm SKU: 61557570](https://maedler.in/product/locking-assembly-com-cb2-bore-70mm-size-70x110x40mm-sku-61557570/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 65mm size 6x95x33mm SKU: 61557565](https://maedler.in/product/locking-assembly-com-cb2-bore-65mm-size-6x95x33mm-sku-61557565/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 60mm size 60x90x33mm SKU: 61557560](https://maedler.in/product/locking-assembly-com-cb2-bore-60mm-size-60x90x33mm-sku-61557560/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 55mm size 55x85x33mm SKU: 61557555](https://maedler.in/product/locking-assembly-com-cb2-bore-55mm-size-55x85x33mm-sku-61557555/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 50mm size 50x80x33mm SKU: 61557550](https://maedler.in/product/locking-assembly-com-cb2-bore-50mm-size-50x80x33mm-sku-61557550/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 48mm size 48x80x33mm SKU: 61557548](https://maedler.in/product/locking-assembly-com-cb2-bore-48mm-size-48x80x33mm-sku-61557548/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 45mm size 45x75x33mm SKU: 61557545](https://maedler.in/product/locking-assembly-com-cb2-bore-45mm-size-45x75x33mm-sku-61557545/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 42mm size 42x75x33mm SKU: 61557542](https://maedler.in/product/locking-assembly-com-cb2-bore-42mm-size-42x75x33mm-sku-61557542/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 40mm size 40x65x28mm SKU: 61557540](https://maedler.in/product/locking-assembly-com-cb2-bore-40mm-size-40x65x28mm-sku-61557540/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 38mm size 38x65x28mm SKU: 61557538](https://maedler.in/product/locking-assembly-com-cb2-bore-38mm-size-38x65x28mm-sku-61557538/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 35mm size 35x60x28mm SKU: 61557535](https://maedler.in/product/locking-assembly-com-cb2-bore-35mm-size-35x60x28mm-sku-61557535/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 32mm size 32x60x28mm SKU: 61557532](https://maedler.in/product/locking-assembly-com-cb2-bore-32mm-size-32x60x28mm-sku-61557532/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 30mm size 30x55x28mm SKU: 61557530](https://maedler.in/product/locking-assembly-com-cb2-bore-30mm-size-30x55x28mm-sku-61557530/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 28mm size 28x55x28mm SKU: 61557528](https://maedler.in/product/locking-assembly-com-cb2-bore-28mm-size-28x55x28mm-sku-61557528/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 25mm size 25x50x28mm SKU: 61557525](https://maedler.in/product/locking-assembly-com-cb2-bore-25mm-size-25x50x28mm-sku-61557525/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 24mm size 24x50x28mm SKU: 61557524](https://maedler.in/product/locking-assembly-com-cb2-bore-24mm-size-24x50x28mm-sku-61557524/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 22mm size 22x47x28mm SKU: 61557522](https://maedler.in/product/locking-assembly-com-cb2-bore-22mm-size-22x47x28mm-sku-61557522/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 20mm size 20x47x28mm SKU: 61557520](https://maedler.in/product/locking-assembly-com-cb2-bore-20mm-size-20x47x28mm-sku-61557520/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 19mm size 19x47x28mm SKU: 61557519](https://maedler.in/product/locking-assembly-com-cb2-bore-19mm-size-19x47x28mm-sku-61557519/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB2 bore 18mm size 18x47x28mm SKU: 61557518](https://maedler.in/product/locking-assembly-com-cb2-bore-18mm-size-18x47x28mm-sku-61557518/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.No axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 48,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 100mm size 100x145x44mm SKU: 61557400](https://maedler.in/product/locking-assembly-com-cb1-bore-100mm-size-100x145x44mm-sku-61557400/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 95mm size 95x135x40mm SKU: 61557395](https://maedler.in/product/locking-assembly-com-cb1-bore-95mm-size-95x135x40mm-sku-61557395/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 90mm size 90x130x40mm SKU: 61557390](https://maedler.in/product/locking-assembly-com-cb1-bore-90mm-size-90x130x40mm-sku-61557390/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 85mm size 85x125x40mm SKU: 61557385](https://maedler.in/product/locking-assembly-com-cb1-bore-85mm-size-85x125x40mm-sku-61557385/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 80mm size 80x120x40mm SKU: 61557380](https://maedler.in/product/locking-assembly-com-cb1-bore-80mm-size-80x120x40mm-sku-61557380/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 75mm size 75x115x40mm SKU: 61557375](https://maedler.in/product/locking-assembly-com-cb1-bore-75mm-size-75x115x40mm-sku-61557375/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 70mm size 70x110x40mm SKU: 61557370](https://maedler.in/product/locking-assembly-com-cb1-bore-70mm-size-70x110x40mm-sku-61557370/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 65mm size 65x95x33mm SKU: 61557365](https://maedler.in/product/locking-assembly-com-cb1-bore-65mm-size-65x95x33mm-sku-61557365/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 60mm size 60x90x33mm SKU: 61557360](https://maedler.in/product/locking-assembly-com-cb1-bore-60mm-size-60x90x33mm-sku-61557360/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 55mm size 55x85x33mm SKU: 61557355](https://maedler.in/product/locking-assembly-com-cb1-bore-55mm-size-55x85x33mm-sku-61557355/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 50mm size 50x80x33mm SKU: 61557350](https://maedler.in/product/locking-assembly-com-cb1-bore-50mm-size-50x80x33mm-sku-61557350/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 48mm size 48x80x33mm SKU: 61557348](https://maedler.in/product/locking-assembly-com-cb1-bore-48mm-size-48x80x33mm-sku-61557348/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 45mm size 45x75x33mm SKU: 61557345](https://maedler.in/product/locking-assembly-com-cb1-bore-45mm-size-45x75x33mm-sku-61557345/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 42mm size 42x75x33mm SKU: 61557342](https://maedler.in/product/locking-assembly-com-cb1-bore-42mm-size-42x75x33mm-sku-61557342/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 40mm size 40x65x28mm SKU: 61557340](https://maedler.in/product/locking-assembly-com-cb1-bore-40mm-size-40x65x28mm-sku-61557340/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 38mm size 38x65x28mm SKU: 61557338](https://maedler.in/product/locking-assembly-com-cb1-bore-38mm-size-38x65x28mm-sku-61557338/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 35mm size 35x60x28mm SKU: 61557335](https://maedler.in/product/locking-assembly-com-cb1-bore-35mm-size-35x60x28mm-sku-61557335/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 32mm size 32x60x28mm SKU: 61557332](https://maedler.in/product/locking-assembly-com-cb1-bore-32mm-size-32x60x28mm-sku-61557332/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 30mm size 30x55x28mm SKU: 61557330](https://maedler.in/product/locking-assembly-com-cb1-bore-30mm-size-30x55x28mm-sku-61557330/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 28mm size 28x55x28mm SKU: 61557328](https://maedler.in/product/locking-assembly-com-cb1-bore-28mm-size-28x55x28mm-sku-61557328/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 25mm size 25x50x28mm SKU: 61557325](https://maedler.in/product/locking-assembly-com-cb1-bore-25mm-size-25x50x28mm-sku-61557325/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 24mm size 24x50x28mm SKU: 61557324](https://maedler.in/product/locking-assembly-com-cb1-bore-24mm-size-24x50x28mm-sku-61557324/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 22mm size 22x47x28mm SKU: 61557322](https://maedler.in/product/locking-assembly-com-cb1-bore-22mm-size-22x47x28mm-sku-61557322/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 20mm size 20x47x28mm SKU: 61557320](https://maedler.in/product/locking-assembly-com-cb1-bore-20mm-size-20x47x28mm-sku-61557320/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 19mm size 19x47x28mm SKU: 61557319](https://maedler.in/product/locking-assembly-com-cb1-bore-19mm-size-19x47x28mm-sku-61557319/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-CB1 bore 18mm size 18x47x28mm SKU: 61557318](https://maedler.in/product/locking-assembly-com-cb1-bore-18mm-size-18x47x28mm-sku-61557318/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques.Self-centering.Self-locking.Axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft Rz max. 12.5 µm.More sizes up to d=200mm for 69,000Nm are available.Price and delivery time on request. - [Locking assembly COM-C bore 100mm size 100-145 SKU: 61557200](https://maedler.in/product/locking-assembly-com-c-bore-100mm-size-100-145-sku-61557200/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 95mm size 95-135 SKU: 61557195](https://maedler.in/product/locking-assembly-com-c-bore-95mm-size-95-135-sku-61557195/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 90mm size 90-130 SKU: 61557190](https://maedler.in/product/locking-assembly-com-c-bore-90mm-size-90-130-sku-61557190/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 85mm size 85-125 SKU: 61557185](https://maedler.in/product/locking-assembly-com-c-bore-85mm-size-85-125-sku-61557185/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 80mm size 80-120 SKU: 61557180](https://maedler.in/product/locking-assembly-com-c-bore-80mm-size-80-120-sku-61557180/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 75mm size 75-115 SKU: 61557175](https://maedler.in/product/locking-assembly-com-c-bore-75mm-size-75-115-sku-61557175/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 70mm size 70-110 SKU: 61557170](https://maedler.in/product/locking-assembly-com-c-bore-70mm-size-70-110-sku-61557170/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 65mm size 65-95 SKU: 61557165](https://maedler.in/product/locking-assembly-com-c-bore-65mm-size-65-95-sku-61557165/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 60mm size 60-90 SKU: 61557160](https://maedler.in/product/locking-assembly-com-c-bore-60mm-size-60-90-sku-61557160/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 55mm size 55-85 SKU: 61557155](https://maedler.in/product/locking-assembly-com-c-bore-55mm-size-55-85-sku-61557155/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 50mm size 50-80 SKU: 61557150](https://maedler.in/product/locking-assembly-com-c-bore-50mm-size-50-80-sku-61557150/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 48mm size 48-80 SKU: 61557148](https://maedler.in/product/locking-assembly-com-c-bore-48mm-size-48-80-sku-61557148/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 45mm size 45-75 SKU: 61557145](https://maedler.in/product/locking-assembly-com-c-bore-45mm-size-45-75-sku-61557145/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 42mm size 42-75 SKU: 61557142](https://maedler.in/product/locking-assembly-com-c-bore-42mm-size-42-75-sku-61557142/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 40mm size 40-65 SKU: 61557140](https://maedler.in/product/locking-assembly-com-c-bore-40mm-size-40-65-sku-61557140/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 38mm size 38-65 SKU: 61557138](https://maedler.in/product/locking-assembly-com-c-bore-38mm-size-38-65-sku-61557138/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 35mm size 35-60 SKU: 61557135](https://maedler.in/product/locking-assembly-com-c-bore-35mm-size-35-60-sku-61557135/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 32mm size 32-60 SKU: 61557132](https://maedler.in/product/locking-assembly-com-c-bore-32mm-size-32-60-sku-61557132/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 30mm size 30-55 SKU: 61557130](https://maedler.in/product/locking-assembly-com-c-bore-30mm-size-30-55-sku-61557130/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 28mm size 28-55 SKU: 61557128](https://maedler.in/product/locking-assembly-com-c-bore-28mm-size-28-55-sku-61557128/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 25mm size 25-50 SKU: 61557125](https://maedler.in/product/locking-assembly-com-c-bore-25mm-size-25-50-sku-61557125/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 24mm size 24-50 SKU: 61557124](https://maedler.in/product/locking-assembly-com-c-bore-24mm-size-24-50-sku-61557124/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 22mm size 22-47 SKU: 61557122](https://maedler.in/product/locking-assembly-com-c-bore-22mm-size-22-47-sku-61557122/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 20mm size 20-47 SKU: 61557120](https://maedler.in/product/locking-assembly-com-c-bore-20mm-size-20-47-sku-61557120/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 19mm size 19-47 SKU: 61557119](https://maedler.in/product/locking-assembly-com-c-bore-19mm-size-19-47-sku-61557119/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 18mm size 18-47 SKU: 61557118](https://maedler.in/product/locking-assembly-com-c-bore-18mm-size-18-47-sku-61557118/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Self-centering. No axial offset during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 100mm size 100-145 SKU: 61557100](https://maedler.in/product/locking-assembly-com-d-bore-100mm-size-100-145-sku-61557100/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-D bore 95mm size 95-135 SKU: 61557095](https://maedler.in/product/locking-assembly-com-d-bore-95mm-size-95-135-sku-61557095/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For high torques. Self-centering. Slight axial offset possible during mounting. Concentricity: 0.02 to 0.04mm. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Neoprene timing belt 390 L 104 teeth belt width 075=19.1mm SKU: 18273900](https://maedler.in/product/neoprene-timing-belt-390-l-104-teeth-belt-width-07519-1mm-sku-18273900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 367 L 98 teeth belt width 075=19.1mm SKU: 18273700](https://maedler.in/product/neoprene-timing-belt-367-l-98-teeth-belt-width-07519-1mm-sku-18273700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 345 L 92 teeth belt width 075=19.1mm SKU: 18273500](https://maedler.in/product/neoprene-timing-belt-345-l-92-teeth-belt-width-07519-1mm-sku-18273500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 322 L 86 teeth belt width 075=19.1mm SKU: 18273200](https://maedler.in/product/neoprene-timing-belt-322-l-86-teeth-belt-width-07519-1mm-sku-18273200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 L 80 teeth belt width 075=19.1mm SKU: 18273000](https://maedler.in/product/neoprene-timing-belt-300-l-80-teeth-belt-width-07519-1mm-sku-18273000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 285 L 76 teeth belt width 075=19.1mm SKU: 18272900](https://maedler.in/product/neoprene-timing-belt-285-l-76-teeth-belt-width-07519-1mm-sku-18272900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 L 72 teeth belt width 075=19.1mm SKU: 18272700](https://maedler.in/product/neoprene-timing-belt-270-l-72-teeth-belt-width-07519-1mm-sku-18272700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 255 L 68 teeth belt width 075=19.1mm SKU: 18272600](https://maedler.in/product/neoprene-timing-belt-255-l-68-teeth-belt-width-07519-1mm-sku-18272600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 L 64 teeth belt width 075=19.1mm SKU: 18272400](https://maedler.in/product/neoprene-timing-belt-240-l-64-teeth-belt-width-07519-1mm-sku-18272400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 225 L 60 teeth belt width 075=19.1mm SKU: 18272200](https://maedler.in/product/neoprene-timing-belt-225-l-60-teeth-belt-width-07519-1mm-sku-18272200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 L 56 teeth belt width 075=19.1mm SKU: 18272100](https://maedler.in/product/neoprene-timing-belt-210-l-56-teeth-belt-width-07519-1mm-sku-18272100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 187 L 50 teeth belt width 075=19.1mm SKU: 18271900](https://maedler.in/product/neoprene-timing-belt-187-l-50-teeth-belt-width-07519-1mm-sku-18271900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 L 40 teeth belt width 075=19.1mm SKU: 18271500](https://maedler.in/product/neoprene-timing-belt-150-l-40-teeth-belt-width-07519-1mm-sku-18271500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 L 33 teeth belt width 075=19.1mm SKU: 18271200](https://maedler.in/product/neoprene-timing-belt-124-l-33-teeth-belt-width-07519-1mm-sku-18271200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt L=3/8" (9.525mm) width 075=19.1mm open length SKU: 18270000](https://maedler.in/product/neoprene-timing-belt-l3-8-9-525mm-width-07519-1mm-open-length-sku-18270000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium L belt width 050=12.7mm SKU: 18269900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-l-belt-width-05012-7mm-sku-18269900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 600 L 160 teeth belt width 050=12.7mm SKU: 18266000](https://maedler.in/product/neoprene-timing-belt-600-l-160-teeth-belt-width-05012-7mm-sku-18266000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 L 144 teeth belt width 050=12.7mm SKU: 18265400](https://maedler.in/product/neoprene-timing-belt-540-l-144-teeth-belt-width-05012-7mm-sku-18265400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 L 136 teeth belt width 050=12.7mm SKU: 18265100](https://maedler.in/product/neoprene-timing-belt-510-l-136-teeth-belt-width-05012-7mm-sku-18265100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 L 128 teeth belt width 050=12.7mm SKU: 18264800](https://maedler.in/product/neoprene-timing-belt-480-l-128-teeth-belt-width-05012-7mm-sku-18264800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 L 120 teeth belt width 050=12.7mm SKU: 18264500](https://maedler.in/product/neoprene-timing-belt-450-l-120-teeth-belt-width-05012-7mm-sku-18264500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 L 112 teeth belt width 050=12.7mm SKU: 18264200](https://maedler.in/product/neoprene-timing-belt-420-l-112-teeth-belt-width-05012-7mm-sku-18264200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 L 104 teeth belt width 050=12.7mm SKU: 18263900](https://maedler.in/product/neoprene-timing-belt-390-l-104-teeth-belt-width-05012-7mm-sku-18263900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 367 L 98 teeth belt width 050=12.7mm SKU: 18263700](https://maedler.in/product/neoprene-timing-belt-367-l-98-teeth-belt-width-05012-7mm-sku-18263700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 345 L 92 teeth belt width 050=12.7mm SKU: 18263500](https://maedler.in/product/neoprene-timing-belt-345-l-92-teeth-belt-width-05012-7mm-sku-18263500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 322 L 86 teeth belt width 050=12.7mm SKU: 18263200](https://maedler.in/product/neoprene-timing-belt-322-l-86-teeth-belt-width-05012-7mm-sku-18263200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 L 80 teeth belt width 050=12.7mm SKU: 18263000](https://maedler.in/product/neoprene-timing-belt-300-l-80-teeth-belt-width-05012-7mm-sku-18263000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 285 L 76 teeth belt width 050=12.7mm SKU: 18262900](https://maedler.in/product/neoprene-timing-belt-285-l-76-teeth-belt-width-05012-7mm-sku-18262900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 L 72 teeth belt width 050=12.7mm SKU: 18262700](https://maedler.in/product/neoprene-timing-belt-270-l-72-teeth-belt-width-05012-7mm-sku-18262700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 255 L 68 teeth belt width 050=12.7mm SKU: 18262600](https://maedler.in/product/neoprene-timing-belt-255-l-68-teeth-belt-width-05012-7mm-sku-18262600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 L 64 teeth belt width 050=12.7mm SKU: 18262400](https://maedler.in/product/neoprene-timing-belt-240-l-64-teeth-belt-width-05012-7mm-sku-18262400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 225 L 60 teeth belt width 050=12.7mm SKU: 18262200](https://maedler.in/product/neoprene-timing-belt-225-l-60-teeth-belt-width-05012-7mm-sku-18262200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 L 56 teeth belt width 050=12.7mm SKU: 18262100](https://maedler.in/product/neoprene-timing-belt-210-l-56-teeth-belt-width-05012-7mm-sku-18262100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 187 L 50 teeth belt width 050=12.7mm SKU: 18261900](https://maedler.in/product/neoprene-timing-belt-187-l-50-teeth-belt-width-05012-7mm-sku-18261900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 L 40 teeth belt width 050=12.7mm SKU: 18261500](https://maedler.in/product/neoprene-timing-belt-150-l-40-teeth-belt-width-05012-7mm-sku-18261500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 L 33 teeth belt width 050=12.7mm SKU: 18261200](https://maedler.in/product/neoprene-timing-belt-124-l-33-teeth-belt-width-05012-7mm-sku-18261200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 050 = 12.7 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt L=3/8" (9.525mm) width 050=12.7mm open length SKU: 18260000](https://maedler.in/product/neoprene-timing-belt-l3-8-9-525mm-width-05012-7mm-open-length-sku-18260000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Timing belt pulley L material grey cast iron 96 teeth for belt width 100=25.4mm SKU: 18238700](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-96-teeth-for-belt-width-10025-4mm-sku-18238700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 84 teeth for belt width 100=25.4mm SKU: 18238400](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-84-teeth-for-belt-width-10025-4mm-sku-18238400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 72 teeth for belt width 100=25.4mm SKU: 18237200](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-72-teeth-for-belt-width-10025-4mm-sku-18237200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 60 teeth for belt width 100=25.4mm SKU: 18236000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-60-teeth-for-belt-width-10025-4mm-sku-18236000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 56 teeth for belt width 100=25.4mm SKU: 18235600](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-56-teeth-for-belt-width-10025-4mm-sku-18235600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 50 teeth for belt width 100=25.4mm SKU: 18235000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-50-teeth-for-belt-width-10025-4mm-sku-18235000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 48 teeth for belt width 100=25.4mm SKU: 18234800](https://maedler.in/product/timing-belt-pulley-l-material-steel-48-teeth-for-belt-width-10025-4mm-sku-18234800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 44 teeth for belt width 100=25.4mm SKU: 18234400](https://maedler.in/product/timing-belt-pulley-l-material-steel-44-teeth-for-belt-width-10025-4mm-sku-18234400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 40 teeth for belt width 100=25.4mm SKU: 18234000](https://maedler.in/product/timing-belt-pulley-l-material-steel-40-teeth-for-belt-width-10025-4mm-sku-18234000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 36 teeth for belt width 100=25.4mm SKU: 18233600](https://maedler.in/product/timing-belt-pulley-l-material-steel-36-teeth-for-belt-width-10025-4mm-sku-18233600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 35 teeth for belt width 100=25.4mm SKU: 18233500](https://maedler.in/product/timing-belt-pulley-l-material-steel-35-teeth-for-belt-width-10025-4mm-sku-18233500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 34 teeth for belt width 100=25.4mm SKU: 18233400](https://maedler.in/product/timing-belt-pulley-l-material-steel-34-teeth-for-belt-width-10025-4mm-sku-18233400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 33 teeth for belt width 100=25.4mm SKU: 18233300](https://maedler.in/product/timing-belt-pulley-l-material-steel-33-teeth-for-belt-width-10025-4mm-sku-18233300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 32 teeth for belt width 100=25.4mm SKU: 18233200](https://maedler.in/product/timing-belt-pulley-l-material-steel-32-teeth-for-belt-width-10025-4mm-sku-18233200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 30 teeth for belt width 100=25.4mm SKU: 18233000](https://maedler.in/product/timing-belt-pulley-l-material-steel-30-teeth-for-belt-width-10025-4mm-sku-18233000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 28 teeth for belt width 100=25.4mm SKU: 18232800](https://maedler.in/product/timing-belt-pulley-l-material-steel-28-teeth-for-belt-width-10025-4mm-sku-18232800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 27 teeth for belt width 100=25.4mm SKU: 18232700](https://maedler.in/product/timing-belt-pulley-l-material-steel-27-teeth-for-belt-width-10025-4mm-sku-18232700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 26 teeth for belt width 100=25.4mm SKU: 18232600](https://maedler.in/product/timing-belt-pulley-l-material-steel-26-teeth-for-belt-width-10025-4mm-sku-18232600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 25 teeth for belt width 100=25.4mm SKU: 18232500](https://maedler.in/product/timing-belt-pulley-l-material-steel-25-teeth-for-belt-width-10025-4mm-sku-18232500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 24 teeth for belt width 100=25.4mm SKU: 18232400](https://maedler.in/product/timing-belt-pulley-l-material-steel-24-teeth-for-belt-width-10025-4mm-sku-18232400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 23 teeth for belt width 100=25.4mm SKU: 18232300](https://maedler.in/product/timing-belt-pulley-l-material-steel-23-teeth-for-belt-width-10025-4mm-sku-18232300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 22 teeth for belt width 100=25.4mm SKU: 18232200](https://maedler.in/product/timing-belt-pulley-l-material-steel-22-teeth-for-belt-width-10025-4mm-sku-18232200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 21 teeth for belt width 100=25.4mm SKU: 18232100](https://maedler.in/product/timing-belt-pulley-l-material-steel-21-teeth-for-belt-width-10025-4mm-sku-18232100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 20 teeth for belt width 100=25.4mm SKU: 18232000](https://maedler.in/product/timing-belt-pulley-l-material-steel-20-teeth-for-belt-width-10025-4mm-sku-18232000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 19 teeth for belt width 100=25.4mm SKU: 18231900](https://maedler.in/product/timing-belt-pulley-l-material-steel-19-teeth-for-belt-width-10025-4mm-sku-18231900/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 18 teeth for belt width 100=25.4mm SKU: 18231800](https://maedler.in/product/timing-belt-pulley-l-material-steel-18-teeth-for-belt-width-10025-4mm-sku-18231800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 17 teeth for belt width 100=25.4mm SKU: 18231700](https://maedler.in/product/timing-belt-pulley-l-material-steel-17-teeth-for-belt-width-10025-4mm-sku-18231700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 16 teeth for belt width 100=25.4mm SKU: 18231600](https://maedler.in/product/timing-belt-pulley-l-material-steel-16-teeth-for-belt-width-10025-4mm-sku-18231600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 15 teeth for belt width 100=25.4mm SKU: 18231500](https://maedler.in/product/timing-belt-pulley-l-material-steel-15-teeth-for-belt-width-10025-4mm-sku-18231500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 14 teeth for belt width 100=25.4mm SKU: 18231400](https://maedler.in/product/timing-belt-pulley-l-material-steel-14-teeth-for-belt-width-10025-4mm-sku-18231400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 13 teeth for belt width 100=25.4mm SKU: 18231300](https://maedler.in/product/timing-belt-pulley-l-material-steel-13-teeth-for-belt-width-10025-4mm-sku-18231300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 12 teeth for belt width 100=25.4mm SKU: 18231200](https://maedler.in/product/timing-belt-pulley-l-material-steel-12-teeth-for-belt-width-10025-4mm-sku-18231200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 11 teeth for belt width 100=25.4mm SKU: 18231100](https://maedler.in/product/timing-belt-pulley-l-material-steel-11-teeth-for-belt-width-10025-4mm-sku-18231100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material steel 10 teeth for belt width 100=25.4mm SKU: 18231000](https://maedler.in/product/timing-belt-pulley-l-material-steel-10-teeth-for-belt-width-10025-4mm-sku-18231000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley L material grey cast iron 96 teeth for belt width 075=19.1mm SKU: 18228700](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-96-teeth-for-belt-width-07519-1mm-sku-18228700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 84 teeth for belt width 075=19.1mm SKU: 18228400](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-84-teeth-for-belt-width-07519-1mm-sku-18228400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 72 teeth for belt width 075=19.1mm SKU: 18227200](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-72-teeth-for-belt-width-07519-1mm-sku-18227200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 60 teeth for belt width 075=19.1mm SKU: 18226000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-60-teeth-for-belt-width-07519-1mm-sku-18226000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 56 teeth for belt width 075=19.1mm SKU: 18225600](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-56-teeth-for-belt-width-07519-1mm-sku-18225600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material grey cast iron 50 teeth for belt width 075=19.1mm SKU: 18225000](https://maedler.in/product/timing-belt-pulley-l-material-grey-cast-iron-50-teeth-for-belt-width-07519-1mm-sku-18225000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 48 teeth for belt width 075=19.1mm SKU: 18224800](https://maedler.in/product/timing-belt-pulley-l-material-steel-48-teeth-for-belt-width-07519-1mm-sku-18224800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 44 teeth for belt width 075=19.1mm SKU: 18224400](https://maedler.in/product/timing-belt-pulley-l-material-steel-44-teeth-for-belt-width-07519-1mm-sku-18224400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 40 teeth for belt width 075=19.1mm SKU: 18224000](https://maedler.in/product/timing-belt-pulley-l-material-steel-40-teeth-for-belt-width-07519-1mm-sku-18224000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 36 teeth for belt width 075=19.1mm SKU: 18223600](https://maedler.in/product/timing-belt-pulley-l-material-steel-36-teeth-for-belt-width-07519-1mm-sku-18223600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 35 teeth for belt width 075=19.1mm SKU: 18223500](https://maedler.in/product/timing-belt-pulley-l-material-steel-35-teeth-for-belt-width-07519-1mm-sku-18223500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 34 teeth for belt width 075=19.1mm SKU: 18223400](https://maedler.in/product/timing-belt-pulley-l-material-steel-34-teeth-for-belt-width-07519-1mm-sku-18223400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 33 teeth for belt width 075=19.1mm SKU: 18223300](https://maedler.in/product/timing-belt-pulley-l-material-steel-33-teeth-for-belt-width-07519-1mm-sku-18223300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 32 teeth for belt width 075=19.1mm SKU: 18223200](https://maedler.in/product/timing-belt-pulley-l-material-steel-32-teeth-for-belt-width-07519-1mm-sku-18223200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 30 teeth for belt width 075=19.1mm SKU: 18223000](https://maedler.in/product/timing-belt-pulley-l-material-steel-30-teeth-for-belt-width-07519-1mm-sku-18223000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 28 teeth for belt width 075=19.1mm SKU: 18222800](https://maedler.in/product/timing-belt-pulley-l-material-steel-28-teeth-for-belt-width-07519-1mm-sku-18222800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 27 teeth for belt width 075=19.1mm SKU: 18222700](https://maedler.in/product/timing-belt-pulley-l-material-steel-27-teeth-for-belt-width-07519-1mm-sku-18222700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 26 teeth for belt width 075=19.1mm SKU: 18222600](https://maedler.in/product/timing-belt-pulley-l-material-steel-26-teeth-for-belt-width-07519-1mm-sku-18222600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 25 teeth for belt width 075=19.1mm SKU: 18222500](https://maedler.in/product/timing-belt-pulley-l-material-steel-25-teeth-for-belt-width-07519-1mm-sku-18222500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 24 teeth for belt width 075=19.1mm SKU: 18222400](https://maedler.in/product/timing-belt-pulley-l-material-steel-24-teeth-for-belt-width-07519-1mm-sku-18222400/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 23 teeth for belt width 075=19.1mm SKU: 18222300](https://maedler.in/product/timing-belt-pulley-l-material-steel-23-teeth-for-belt-width-07519-1mm-sku-18222300/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 22 teeth for belt width 075=19.1mm SKU: 18222200](https://maedler.in/product/timing-belt-pulley-l-material-steel-22-teeth-for-belt-width-07519-1mm-sku-18222200/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 21 teeth for belt width 075=19.1mm SKU: 18222100](https://maedler.in/product/timing-belt-pulley-l-material-steel-21-teeth-for-belt-width-07519-1mm-sku-18222100/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 20 teeth for belt width 075=19.1mm SKU: 18222000](https://maedler.in/product/timing-belt-pulley-l-material-steel-20-teeth-for-belt-width-07519-1mm-sku-18222000/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 19 teeth for belt width 075=19.1mm SKU: 18221900](https://maedler.in/product/timing-belt-pulley-l-material-steel-19-teeth-for-belt-width-07519-1mm-sku-18221900/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 18 teeth for belt width 075=19.1mm SKU: 18221800](https://maedler.in/product/timing-belt-pulley-l-material-steel-18-teeth-for-belt-width-07519-1mm-sku-18221800/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 17 teeth for belt width 075=19.1mm SKU: 18221700](https://maedler.in/product/timing-belt-pulley-l-material-steel-17-teeth-for-belt-width-07519-1mm-sku-18221700/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 16 teeth for belt width 075=19.1mm SKU: 18221600](https://maedler.in/product/timing-belt-pulley-l-material-steel-16-teeth-for-belt-width-07519-1mm-sku-18221600/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley L material steel 15 teeth for belt width 075=19.1mm SKU: 18221500](https://maedler.in/product/timing-belt-pulley-l-material-steel-15-teeth-for-belt-width-07519-1mm-sku-18221500/): Material: Up to a Teeth Number of 48 phosphated steel, from a Teeth Number of 50 grey cast iron GG25. Pre-bored.Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. - [Shrink disk ST-B inner diameter 14mm SKU: 61587014](https://maedler.in/product/shrink-disk-st-b-inner-diameter-14mm-sku-61587014/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disc ST inner diameter 68mm SKU: 61586800](https://maedler.in/product/shrink-disc-st-inner-diameter-68mm-sku-61586800/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 62mm SKU: 61586200](https://maedler.in/product/shrink-disc-st-inner-diameter-62mm-sku-61586200/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 55mm SKU: 61585500](https://maedler.in/product/shrink-disc-st-inner-diameter-55mm-sku-61585500/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 50mm SKU: 61585000](https://maedler.in/product/shrink-disc-st-inner-diameter-50mm-sku-61585000/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 44mm SKU: 61584400](https://maedler.in/product/shrink-disc-st-inner-diameter-44mm-sku-61584400/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 40mm SKU: 61584000](https://maedler.in/product/shrink-disc-st-inner-diameter-40mm-sku-61584000/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 38mm SKU: 61583800](https://maedler.in/product/shrink-disc-st-inner-diameter-38mm-sku-61583800/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 36mm SKU: 61583600](https://maedler.in/product/shrink-disc-st-inner-diameter-36mm-sku-61583600/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 30mm SKU: 61583000](https://maedler.in/product/shrink-disc-st-inner-diameter-30mm-sku-61583000/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 24mm SKU: 61582400](https://maedler.in/product/shrink-disc-st-inner-diameter-24mm-sku-61582400/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 21mm SKU: 61582100](https://maedler.in/product/shrink-disc-st-inner-diameter-21mm-sku-61582100/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 20mm SKU: 61582000](https://maedler.in/product/shrink-disc-st-inner-diameter-20mm-sku-61582000/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 18mm SKU: 61581800](https://maedler.in/product/shrink-disc-st-inner-diameter-18mm-sku-61581800/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 16mm SKU: 61581600](https://maedler.in/product/shrink-disc-st-inner-diameter-16mm-sku-61581600/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST inner diameter 14mm SKU: 61581400](https://maedler.in/product/shrink-disc-st-inner-diameter-14mm-sku-61581400/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Locking assembly COM-B bore 50mm size 50-65 QPQ-coated SKU: 61577650](https://maedler.in/product/locking-assembly-com-b-bore-50mm-size-50-65-qpq-coated-sku-61577650/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 45mm size 45-59 QPQ-coated SKU: 61577645](https://maedler.in/product/locking-assembly-com-b-bore-45mm-size-45-59-qpq-coated-sku-61577645/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 40mm size 40-53 QPQ-coated SKU: 61577640](https://maedler.in/product/locking-assembly-com-b-bore-40mm-size-40-53-qpq-coated-sku-61577640/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 35mm size 35-47 QPQ-coated SKU: 61577635](https://maedler.in/product/locking-assembly-com-b-bore-35mm-size-35-47-qpq-coated-sku-61577635/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 32mm size 32-43 QPQ-coated SKU: 61577632](https://maedler.in/product/locking-assembly-com-b-bore-32mm-size-32-43-qpq-coated-sku-61577632/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 30mm size 30-41 QPQ-coated SKU: 61577630](https://maedler.in/product/locking-assembly-com-b-bore-30mm-size-30-41-qpq-coated-sku-61577630/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 28mm size 28-39 QPQ-coated SKU: 61577628](https://maedler.in/product/locking-assembly-com-b-bore-28mm-size-28-39-qpq-coated-sku-61577628/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 25mm size 25-34 QPQ-coated SKU: 61577625](https://maedler.in/product/locking-assembly-com-b-bore-25mm-size-25-34-qpq-coated-sku-61577625/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 24mm size 24-34 QPQ-coated SKU: 61577624](https://maedler.in/product/locking-assembly-com-b-bore-24mm-size-24-34-qpq-coated-sku-61577624/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 22mm size 22-32 QPQ-coated SKU: 61577622](https://maedler.in/product/locking-assembly-com-b-bore-22mm-size-22-32-qpq-coated-sku-61577622/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 20mm size 20-28 QPQ-coated SKU: 61577620](https://maedler.in/product/locking-assembly-com-b-bore-20mm-size-20-28-qpq-coated-sku-61577620/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 19mm size 19-27 QPQ-coated SKU: 61577619](https://maedler.in/product/locking-assembly-com-b-bore-19mm-size-19-27-qpq-coated-sku-61577619/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 18mm size 18-26 QPQ-coated SKU: 61577618](https://maedler.in/product/locking-assembly-com-b-bore-18mm-size-18-26-qpq-coated-sku-61577618/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 17mm size 17-26 QPQ-coated SKU: 61577617](https://maedler.in/product/locking-assembly-com-b-bore-17mm-size-17-26-qpq-coated-sku-61577617/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 16mm size 16-24 QPQ-coated SKU: 61577616](https://maedler.in/product/locking-assembly-com-b-bore-16mm-size-16-24-qpq-coated-sku-61577616/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 15mm size 15-24 QPQ-coated SKU: 61577615](https://maedler.in/product/locking-assembly-com-b-bore-15mm-size-15-24-qpq-coated-sku-61577615/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 14mm size 14-23 QPQ-coated SKU: 61577614](https://maedler.in/product/locking-assembly-com-b-bore-14mm-size-14-23-qpq-coated-sku-61577614/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 12mm size 12-18 QPQ-coated SKU: 61577612](https://maedler.in/product/locking-assembly-com-b-bore-12mm-size-12-18-qpq-coated-sku-61577612/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 11mm size 11-18 QPQ-coated SKU: 61577611](https://maedler.in/product/locking-assembly-com-b-bore-11mm-size-11-18-qpq-coated-sku-61577611/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 10mm size 10-16 QPQ-coated SKU: 61577610](https://maedler.in/product/locking-assembly-com-b-bore-10mm-size-10-16-qpq-coated-sku-61577610/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 9mm size 9-16 QPQ-coated SKU: 61577609](https://maedler.in/product/locking-assembly-com-b-bore-9mm-size-9-16-qpq-coated-sku-61577609/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 8mm size 8-15 QPQ-coated SKU: 61577608](https://maedler.in/product/locking-assembly-com-b-bore-8mm-size-8-15-qpq-coated-sku-61577608/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 7mm size 7-15 QPQ-coated SKU: 61577607](https://maedler.in/product/locking-assembly-com-b-bore-7mm-size-7-15-qpq-coated-sku-61577607/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 6mm size 6-14 QPQ-coated SKU: 61577606](https://maedler.in/product/locking-assembly-com-b-bore-6mm-size-6-14-qpq-coated-sku-61577606/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A bore 50mm size 50-80 QPQ-coated SKU: 61577550](https://maedler.in/product/locking-assembly-com-a-bore-50mm-size-50-80-qpq-coated-sku-61577550/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 45mm size 45-75 QPQ-coated SKU: 61577545](https://maedler.in/product/locking-assembly-com-a-bore-45mm-size-45-75-qpq-coated-sku-61577545/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 40mm size 40-65 QPQ-coated SKU: 61577540](https://maedler.in/product/locking-assembly-com-a-bore-40mm-size-40-65-qpq-coated-sku-61577540/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 38mm size 38-65 QPQ-coated SKU: 61577538](https://maedler.in/product/locking-assembly-com-a-bore-38mm-size-38-65-qpq-coated-sku-61577538/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 35mm size 35-60 QPQ-coated SKU: 61577535](https://maedler.in/product/locking-assembly-com-a-bore-35mm-size-35-60-qpq-coated-sku-61577535/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 32mm size 32-60 QPQ-coated SKU: 61577532](https://maedler.in/product/locking-assembly-com-a-bore-32mm-size-32-60-qpq-coated-sku-61577532/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 30mm size 30-55 QPQ-coated SKU: 61577530](https://maedler.in/product/locking-assembly-com-a-bore-30mm-size-30-55-qpq-coated-sku-61577530/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 28mm size 28-55 QPQ-coated SKU: 61577528](https://maedler.in/product/locking-assembly-com-a-bore-28mm-size-28-55-qpq-coated-sku-61577528/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 25mm size 25-50 QPQ-coated SKU: 61577525](https://maedler.in/product/locking-assembly-com-a-bore-25mm-size-25-50-qpq-coated-sku-61577525/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 24mm size 24-50 QPQ-coated SKU: 61577524](https://maedler.in/product/locking-assembly-com-a-bore-24mm-size-24-50-qpq-coated-sku-61577524/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 22mm size 22-47 QPQ-coated SKU: 61577522](https://maedler.in/product/locking-assembly-com-a-bore-22mm-size-22-47-qpq-coated-sku-61577522/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 20mm size 20-47 QPQ-coated SKU: 61577520](https://maedler.in/product/locking-assembly-com-a-bore-20mm-size-20-47-qpq-coated-sku-61577520/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 19mm size 19-47 QPQ-coated SKU: 61577519](https://maedler.in/product/locking-assembly-com-a-bore-19mm-size-19-47-qpq-coated-sku-61577519/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 18mm size 18-47 QPQ-coated SKU: 61577518](https://maedler.in/product/locking-assembly-com-a-bore-18mm-size-18-47-qpq-coated-sku-61577518/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 17mm size 17-44 QPQ-coated SKU: 61577517](https://maedler.in/product/locking-assembly-com-a-bore-17mm-size-17-44-qpq-coated-sku-61577517/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 16mm size 16-44 QPQ-coated SKU: 61577516](https://maedler.in/product/locking-assembly-com-a-bore-16mm-size-16-44-qpq-coated-sku-61577516/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 15mm size 15-42 QPQ-coated SKU: 61577515](https://maedler.in/product/locking-assembly-com-a-bore-15mm-size-15-42-qpq-coated-sku-61577515/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly COM-A bore 14mm size 14-42 QPQ-coated SKU: 61577514](https://maedler.in/product/locking-assembly-com-a-bore-14mm-size-14-42-qpq-coated-sku-61577514/): Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4. - [Locking assembly BAR bore 50mm QPQ-coated SKU: 61575000](https://maedler.in/product/locking-assembly-bar-bore-50mm-qpq-coated-sku-61575000/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 40mm QPQ-coated SKU: 61574000](https://maedler.in/product/locking-assembly-bar-bore-40mm-qpq-coated-sku-61574000/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 38mm QPQ-coated SKU: 61573800](https://maedler.in/product/locking-assembly-bar-bore-38mm-qpq-coated-sku-61573800/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 35mm QPQ-coated SKU: 61573500](https://maedler.in/product/locking-assembly-bar-bore-35mm-qpq-coated-sku-61573500/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 30mm QPQ-coated SKU: 61573000](https://maedler.in/product/locking-assembly-bar-bore-30mm-qpq-coated-sku-61573000/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 25mm QPQ-coated SKU: 61572500](https://maedler.in/product/locking-assembly-bar-bore-25mm-qpq-coated-sku-61572500/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 22mm QPQ-coated SKU: 61572200](https://maedler.in/product/locking-assembly-bar-bore-22mm-qpq-coated-sku-61572200/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 20mm QPQ-coated SKU: 61572000](https://maedler.in/product/locking-assembly-bar-bore-20mm-qpq-coated-sku-61572000/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 19mm QPQ-coated SKU: 61571900](https://maedler.in/product/locking-assembly-bar-bore-19mm-qpq-coated-sku-61571900/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 18mm QPQ-coated SKU: 61571800](https://maedler.in/product/locking-assembly-bar-bore-18mm-qpq-coated-sku-61571800/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 17mm QPQ-coated SKU: 61571700](https://maedler.in/product/locking-assembly-bar-bore-17mm-qpq-coated-sku-61571700/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 16mm QPQ-coated SKU: 61571600](https://maedler.in/product/locking-assembly-bar-bore-16mm-qpq-coated-sku-61571600/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 15mm QPQ-coated SKU: 61571500](https://maedler.in/product/locking-assembly-bar-bore-15mm-qpq-coated-sku-61571500/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 14mm QPQ-coated SKU: 61571400](https://maedler.in/product/locking-assembly-bar-bore-14mm-qpq-coated-sku-61571400/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 12mm QPQ-coated SKU: 61571200](https://maedler.in/product/locking-assembly-bar-bore-12mm-qpq-coated-sku-61571200/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 11mm QPQ-coated SKU: 61571100](https://maedler.in/product/locking-assembly-bar-bore-11mm-qpq-coated-sku-61571100/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 10mm QPQ-coated SKU: 61571000](https://maedler.in/product/locking-assembly-bar-bore-10mm-qpq-coated-sku-61571000/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 9mm QPQ-coated SKU: 61570900](https://maedler.in/product/locking-assembly-bar-bore-9mm-qpq-coated-sku-61570900/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 8mm QPQ-coated SKU: 61570800](https://maedler.in/product/locking-assembly-bar-bore-8mm-qpq-coated-sku-61570800/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 6.35mm QPQ-coated SKU: 61570635](https://maedler.in/product/locking-assembly-bar-bore-6-35mm-qpq-coated-sku-61570635/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 6mm QPQ-coated SKU: 61570600](https://maedler.in/product/locking-assembly-bar-bore-6mm-qpq-coated-sku-61570600/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly BAR bore 5mm QPQ-coated SKU: 61570500](https://maedler.in/product/locking-assembly-bar-bore-5mm-qpq-coated-sku-61570500/): Material: Steel. - For fixing a hub on a shaft. - QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below). - For medium torques. - Self-centering. - Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 12 µm. QPQ Surface Properties: Very good corrosion resistance, better than hard chrome or chem. nickel. Corrosion resistance in the salt spray test SS CASS in accordance with DIN 50021. Layer thickness of 10 - 25 µm possible. For medium operational demands we recommend a layer thickness of 15 µm at a 90 minute treatment. Only very small changes in dimensions (only 5 µm), as the surface modification is achieved through diffusion and not application. Surface hardness same as clamping set material = 350 HV. Improved wear resistance, no fretting corrosion, no cold shut. Increased endurance strength, sometimes up to 100% higher. Is completely safe to use with food as long as there is no contact with any acidic substances with a pH-value of = 4. - [Locking assembly COM-B bore 100mm size 100-125 SKU: 61570000](https://maedler.in/product/locking-assembly-com-b-bore-100mm-size-100-125-sku-61570000/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 95mm size 95-120 SKU: 61569500](https://maedler.in/product/locking-assembly-com-b-bore-95mm-size-95-120-sku-61569500/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 90mm size 90-112 SKU: 61569000](https://maedler.in/product/locking-assembly-com-b-bore-90mm-size-90-112-sku-61569000/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 85mm size 85-106 SKU: 61568500](https://maedler.in/product/locking-assembly-com-b-bore-85mm-size-85-106-sku-61568500/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 80mm size 80-100 SKU: 61568000](https://maedler.in/product/locking-assembly-com-b-bore-80mm-size-80-100-sku-61568000/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 75mm size 75-95 SKU: 61567500](https://maedler.in/product/locking-assembly-com-b-bore-75mm-size-75-95-sku-61567500/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 70mm size 70-90 SKU: 61567000](https://maedler.in/product/locking-assembly-com-b-bore-70mm-size-70-90-sku-61567000/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 65mm size 65-84 SKU: 61566500](https://maedler.in/product/locking-assembly-com-b-bore-65mm-size-65-84-sku-61566500/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 60mm size 60-77 SKU: 61566000](https://maedler.in/product/locking-assembly-com-b-bore-60mm-size-60-77-sku-61566000/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 55mm size 55-71 SKU: 61565500](https://maedler.in/product/locking-assembly-com-b-bore-55mm-size-55-71-sku-61565500/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 50mm size 50-65 SKU: 61565000](https://maedler.in/product/locking-assembly-com-b-bore-50mm-size-50-65-sku-61565000/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 48mm size 48-62 SKU: 61564800](https://maedler.in/product/locking-assembly-com-b-bore-48mm-size-48-62-sku-61564800/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 45mm size 45-59 SKU: 61564500](https://maedler.in/product/locking-assembly-com-b-bore-45mm-size-45-59-sku-61564500/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 42mm size 42-55 SKU: 61564200](https://maedler.in/product/locking-assembly-com-b-bore-42mm-size-42-55-sku-61564200/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 40mm size 40-53 SKU: 61564000](https://maedler.in/product/locking-assembly-com-b-bore-40mm-size-40-53-sku-61564000/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 38mm size 38-50 SKU: 61563800](https://maedler.in/product/locking-assembly-com-b-bore-38mm-size-38-50-sku-61563800/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 35mm size 35-47 SKU: 61563500](https://maedler.in/product/locking-assembly-com-b-bore-35mm-size-35-47-sku-61563500/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 32mm size 32-43 SKU: 61563200](https://maedler.in/product/locking-assembly-com-b-bore-32mm-size-32-43-sku-61563200/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 30mm size 30-41 SKU: 61563000](https://maedler.in/product/locking-assembly-com-b-bore-30mm-size-30-41-sku-61563000/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-B bore 28mm size 28-39 SKU: 61562800](https://maedler.in/product/locking-assembly-com-b-bore-28mm-size-28-39-sku-61562800/): Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Timing belt pulley H material grey cast iron 60 teeth for belt width 100=25.4mm SKU: 18416000](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-60-teeth-for-belt-width-10025-4mm-sku-18416000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 58 teeth for belt width 100=25.4mm SKU: 18415800](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-58-teeth-for-belt-width-10025-4mm-sku-18415800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 50 teeth for belt width 100=25.4mm SKU: 18415000](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-50-teeth-for-belt-width-10025-4mm-sku-18415000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 48 teeth for belt width 100=25.4mm SKU: 18414800](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-48-teeth-for-belt-width-10025-4mm-sku-18414800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 44 teeth for belt width 100=25.4mm SKU: 18414400](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-44-teeth-for-belt-width-10025-4mm-sku-18414400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 40 teeth for belt width 100=25.4mm SKU: 18414000](https://maedler.in/product/timing-belt-pulley-h-material-steel-40-teeth-for-belt-width-10025-4mm-sku-18414000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 38 teeth for belt width 100=25.4mm SKU: 18413800](https://maedler.in/product/timing-belt-pulley-h-material-steel-38-teeth-for-belt-width-10025-4mm-sku-18413800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 36 teeth for belt width 100=25.4mm SKU: 18413600](https://maedler.in/product/timing-belt-pulley-h-material-steel-36-teeth-for-belt-width-10025-4mm-sku-18413600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 35 teeth for belt width 100=25.4mm SKU: 18413500](https://maedler.in/product/timing-belt-pulley-h-material-steel-35-teeth-for-belt-width-10025-4mm-sku-18413500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 34 teeth for belt width 100=25.4mm SKU: 18413400](https://maedler.in/product/timing-belt-pulley-h-material-steel-34-teeth-for-belt-width-10025-4mm-sku-18413400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 33 teeth for belt width 100=25.4mm SKU: 18413300](https://maedler.in/product/timing-belt-pulley-h-material-steel-33-teeth-for-belt-width-10025-4mm-sku-18413300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 32 teeth for belt width 100=25.4mm SKU: 18413200](https://maedler.in/product/timing-belt-pulley-h-material-steel-32-teeth-for-belt-width-10025-4mm-sku-18413200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 30 teeth for belt width 100=25.4mm SKU: 18413000](https://maedler.in/product/timing-belt-pulley-h-material-steel-30-teeth-for-belt-width-10025-4mm-sku-18413000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 28 teeth for belt width 100=25.4mm SKU: 18412800](https://maedler.in/product/timing-belt-pulley-h-material-steel-28-teeth-for-belt-width-10025-4mm-sku-18412800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 27 teeth for belt width 100=25.4mm SKU: 18412700](https://maedler.in/product/timing-belt-pulley-h-material-steel-27-teeth-for-belt-width-10025-4mm-sku-18412700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 26 teeth for belt width 100=25.4mm SKU: 18412600](https://maedler.in/product/timing-belt-pulley-h-material-steel-26-teeth-for-belt-width-10025-4mm-sku-18412600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 25 teeth for belt width 100=25.4mm SKU: 18412500](https://maedler.in/product/timing-belt-pulley-h-material-steel-25-teeth-for-belt-width-10025-4mm-sku-18412500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 24 teeth for belt width 100=25.4mm SKU: 18412400](https://maedler.in/product/timing-belt-pulley-h-material-steel-24-teeth-for-belt-width-10025-4mm-sku-18412400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 23 teeth for belt width 100=25.4mm SKU: 18412300](https://maedler.in/product/timing-belt-pulley-h-material-steel-23-teeth-for-belt-width-10025-4mm-sku-18412300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 22 teeth for belt width 100=25.4mm SKU: 18412200](https://maedler.in/product/timing-belt-pulley-h-material-steel-22-teeth-for-belt-width-10025-4mm-sku-18412200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 21 teeth for belt width 100=25.4mm SKU: 18412100](https://maedler.in/product/timing-belt-pulley-h-material-steel-21-teeth-for-belt-width-10025-4mm-sku-18412100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 20 teeth for belt width 100=25.4mm SKU: 18412000](https://maedler.in/product/timing-belt-pulley-h-material-steel-20-teeth-for-belt-width-10025-4mm-sku-18412000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 19 teeth for belt width 100=25.4mm SKU: 18411900](https://maedler.in/product/timing-belt-pulley-h-material-steel-19-teeth-for-belt-width-10025-4mm-sku-18411900/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 18 teeth for belt width 100=25.4mm SKU: 18411800](https://maedler.in/product/timing-belt-pulley-h-material-steel-18-teeth-for-belt-width-10025-4mm-sku-18411800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 17 teeth for belt width 100=25.4mm SKU: 18411700](https://maedler.in/product/timing-belt-pulley-h-material-steel-17-teeth-for-belt-width-10025-4mm-sku-18411700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 16 teeth for belt width 100=25.4mm SKU: 18411600](https://maedler.in/product/timing-belt-pulley-h-material-steel-16-teeth-for-belt-width-10025-4mm-sku-18411600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 15 teeth for belt width 100=25.4mm SKU: 18411500](https://maedler.in/product/timing-belt-pulley-h-material-steel-15-teeth-for-belt-width-10025-4mm-sku-18411500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material steel 14 teeth for belt width 100=25.4mm SKU: 18411400](https://maedler.in/product/timing-belt-pulley-h-material-steel-14-teeth-for-belt-width-10025-4mm-sku-18411400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 50 teeth for belt width 075=19.1mm SKU: 18405000](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-50-teeth-for-belt-width-07519-1mm-sku-18405000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material grey cast iron 48 teeth for belt width 075=19.1mm SKU: 18404800](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-48-teeth-for-belt-width-07519-1mm-sku-18404800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material grey cast iron 44 teeth for belt width 075=19.1mm SKU: 18404400](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-44-teeth-for-belt-width-07519-1mm-sku-18404400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 40 teeth for belt width 075=19.1mm SKU: 18404000](https://maedler.in/product/timing-belt-pulley-h-material-steel-40-teeth-for-belt-width-07519-1mm-sku-18404000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 38 teeth for belt width 075=19.1mm SKU: 18403800](https://maedler.in/product/timing-belt-pulley-h-material-steel-38-teeth-for-belt-width-07519-1mm-sku-18403800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 36 teeth for belt width 075=19.1mm SKU: 18403600](https://maedler.in/product/timing-belt-pulley-h-material-steel-36-teeth-for-belt-width-07519-1mm-sku-18403600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 35 teeth for belt width 075=19.1mm SKU: 18403500](https://maedler.in/product/timing-belt-pulley-h-material-steel-35-teeth-for-belt-width-07519-1mm-sku-18403500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 34 teeth for belt width 075=19.1mm SKU: 18403400](https://maedler.in/product/timing-belt-pulley-h-material-steel-34-teeth-for-belt-width-07519-1mm-sku-18403400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 33 teeth for belt width 075=19.1mm SKU: 18403300](https://maedler.in/product/timing-belt-pulley-h-material-steel-33-teeth-for-belt-width-07519-1mm-sku-18403300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 32 teeth for belt width 075=19.1mm SKU: 18403200](https://maedler.in/product/timing-belt-pulley-h-material-steel-32-teeth-for-belt-width-07519-1mm-sku-18403200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 30 teeth for belt width 075=19.1mm SKU: 18403000](https://maedler.in/product/timing-belt-pulley-h-material-steel-30-teeth-for-belt-width-07519-1mm-sku-18403000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 28 teeth for belt width 075=19.1mm SKU: 18402800](https://maedler.in/product/timing-belt-pulley-h-material-steel-28-teeth-for-belt-width-07519-1mm-sku-18402800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 27 teeth for belt width 075=19.1mm SKU: 18402700](https://maedler.in/product/timing-belt-pulley-h-material-steel-27-teeth-for-belt-width-07519-1mm-sku-18402700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 26 teeth for belt width 075=19.1mm SKU: 18402600](https://maedler.in/product/timing-belt-pulley-h-material-steel-26-teeth-for-belt-width-07519-1mm-sku-18402600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 25 teeth for belt width 075=19.1mm SKU: 18402500](https://maedler.in/product/timing-belt-pulley-h-material-steel-25-teeth-for-belt-width-07519-1mm-sku-18402500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 24 teeth for belt width 075=19.1mm SKU: 18402400](https://maedler.in/product/timing-belt-pulley-h-material-steel-24-teeth-for-belt-width-07519-1mm-sku-18402400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 23 teeth for belt width 075=19.1mm SKU: 18402300](https://maedler.in/product/timing-belt-pulley-h-material-steel-23-teeth-for-belt-width-07519-1mm-sku-18402300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 22 teeth for belt width 075=19.1mm SKU: 18402200](https://maedler.in/product/timing-belt-pulley-h-material-steel-22-teeth-for-belt-width-07519-1mm-sku-18402200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 21 teeth for belt width 075=19.1mm SKU: 18402100](https://maedler.in/product/timing-belt-pulley-h-material-steel-21-teeth-for-belt-width-07519-1mm-sku-18402100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 20 teeth for belt width 075=19.1mm SKU: 18402000](https://maedler.in/product/timing-belt-pulley-h-material-steel-20-teeth-for-belt-width-07519-1mm-sku-18402000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 19 teeth for belt width 075=19.1mm SKU: 18401900](https://maedler.in/product/timing-belt-pulley-h-material-steel-19-teeth-for-belt-width-07519-1mm-sku-18401900/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 18 teeth for belt width 075=19.1mm SKU: 18401800](https://maedler.in/product/timing-belt-pulley-h-material-steel-18-teeth-for-belt-width-07519-1mm-sku-18401800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 17 teeth for belt width 075=19.1mm SKU: 18401700](https://maedler.in/product/timing-belt-pulley-h-material-steel-17-teeth-for-belt-width-07519-1mm-sku-18401700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 16 teeth for belt width 075=19.1mm SKU: 18401600](https://maedler.in/product/timing-belt-pulley-h-material-steel-16-teeth-for-belt-width-07519-1mm-sku-18401600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 15 teeth for belt width 075=19.1mm SKU: 18401500](https://maedler.in/product/timing-belt-pulley-h-material-steel-15-teeth-for-belt-width-07519-1mm-sku-18401500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [Timing belt pulley H material steel 14 teeth for belt width 075=19.1mm SKU: 18401400](https://maedler.in/product/timing-belt-pulley-h-material-steel-14-teeth-for-belt-width-07519-1mm-sku-18401400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. - [timing bar L 3/8" (9.525mm) 30 teeth length 160mm material aluminium SKU: 18293000](https://maedler.in/product/timing-bar-l-3-8-9-525mm-30-teeth-length-160mm-material-aluminium-sku-18293000/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 27 teeth length 160mm material aluminium SKU: 18292700](https://maedler.in/product/timing-bar-l-3-8-9-525mm-27-teeth-length-160mm-material-aluminium-sku-18292700/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 24 teeth length 160mm material aluminium SKU: 18292400](https://maedler.in/product/timing-bar-l-3-8-9-525mm-24-teeth-length-160mm-material-aluminium-sku-18292400/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 23 teeth length 160mm material aluminium SKU: 18292300](https://maedler.in/product/timing-bar-l-3-8-9-525mm-23-teeth-length-160mm-material-aluminium-sku-18292300/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 22 teeth length 160mm material aluminium SKU: 18292200](https://maedler.in/product/timing-bar-l-3-8-9-525mm-22-teeth-length-160mm-material-aluminium-sku-18292200/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 21 teeth length 160mm material aluminium SKU: 18292100](https://maedler.in/product/timing-bar-l-3-8-9-525mm-21-teeth-length-160mm-material-aluminium-sku-18292100/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 20 teeth length 160mm material aluminium SKU: 18292000](https://maedler.in/product/timing-bar-l-3-8-9-525mm-20-teeth-length-160mm-material-aluminium-sku-18292000/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 19 teeth length 160mm material aluminium SKU: 18291900](https://maedler.in/product/timing-bar-l-3-8-9-525mm-19-teeth-length-160mm-material-aluminium-sku-18291900/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 18 teeth length 160mm material aluminium SKU: 18291800](https://maedler.in/product/timing-bar-l-3-8-9-525mm-18-teeth-length-160mm-material-aluminium-sku-18291800/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 17 teeth length 160mm material aluminium SKU: 18291700](https://maedler.in/product/timing-bar-l-3-8-9-525mm-17-teeth-length-160mm-material-aluminium-sku-18291700/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 16 teeth length 160mm material aluminium SKU: 18291600](https://maedler.in/product/timing-bar-l-3-8-9-525mm-16-teeth-length-160mm-material-aluminium-sku-18291600/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 15 teeth length 160mm material aluminium SKU: 18291500](https://maedler.in/product/timing-bar-l-3-8-9-525mm-15-teeth-length-160mm-material-aluminium-sku-18291500/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 14 teeth length 160mm material aluminium SKU: 18291400](https://maedler.in/product/timing-bar-l-3-8-9-525mm-14-teeth-length-160mm-material-aluminium-sku-18291400/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 13 teeth length 160mm material aluminium SKU: 18291300](https://maedler.in/product/timing-bar-l-3-8-9-525mm-13-teeth-length-160mm-material-aluminium-sku-18291300/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 12 teeth length 160mm material aluminium SKU: 18291200](https://maedler.in/product/timing-bar-l-3-8-9-525mm-12-teeth-length-160mm-material-aluminium-sku-18291200/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 11 teeth length 140mm material aluminium SKU: 18291100](https://maedler.in/product/timing-bar-l-3-8-9-525mm-11-teeth-length-140mm-material-aluminium-sku-18291100/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [timing bar L 3/8" (9.525mm) 10 teeth length 140mm material aluminium SKU: 18291000](https://maedler.in/product/timing-bar-l-3-8-9-525mm-10-teeth-length-140mm-material-aluminium-sku-18291000/): Material: Aluminium similar EN AW2017A. Profile L = 3/8" = 9.525 mm. - [Fixing plate for timing belts material aluminium L belt width 100=25.4mm SKU: 18289900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-l-belt-width-10025-4mm-sku-18289900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 600 L 160 teeth belt width 100=25.4mm SKU: 18286000](https://maedler.in/product/neoprene-timing-belt-600-l-160-teeth-belt-width-10025-4mm-sku-18286000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 L 144 teeth belt width 100=25.4mm SKU: 18285400](https://maedler.in/product/neoprene-timing-belt-540-l-144-teeth-belt-width-10025-4mm-sku-18285400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 L 136 teeth belt width 100=25.4mm SKU: 18285100](https://maedler.in/product/neoprene-timing-belt-510-l-136-teeth-belt-width-10025-4mm-sku-18285100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 L 128 teeth belt width 100=25.4mm SKU: 18284800](https://maedler.in/product/neoprene-timing-belt-480-l-128-teeth-belt-width-10025-4mm-sku-18284800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 L 120 teeth belt width 100=25.4mm SKU: 18284500](https://maedler.in/product/neoprene-timing-belt-450-l-120-teeth-belt-width-10025-4mm-sku-18284500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 L 112 teeth belt width 100=25.4mm SKU: 18284200](https://maedler.in/product/neoprene-timing-belt-420-l-112-teeth-belt-width-10025-4mm-sku-18284200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 L 104 teeth belt width 100=25.4mm SKU: 18283900](https://maedler.in/product/neoprene-timing-belt-390-l-104-teeth-belt-width-10025-4mm-sku-18283900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 367 L 98 teeth belt width 100=25.4mm SKU: 18283700](https://maedler.in/product/neoprene-timing-belt-367-l-98-teeth-belt-width-10025-4mm-sku-18283700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 345 L 92 teeth belt width 100=25.4mm SKU: 18283500](https://maedler.in/product/neoprene-timing-belt-345-l-92-teeth-belt-width-10025-4mm-sku-18283500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 322 L 86 teeth belt width 100=25.4mm SKU: 18283200](https://maedler.in/product/neoprene-timing-belt-322-l-86-teeth-belt-width-10025-4mm-sku-18283200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 L 80 teeth belt width 100=25.4mm SKU: 18283000](https://maedler.in/product/neoprene-timing-belt-300-l-80-teeth-belt-width-10025-4mm-sku-18283000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 285 L 76 teeth belt width 100=25.4mm SKU: 18282900](https://maedler.in/product/neoprene-timing-belt-285-l-76-teeth-belt-width-10025-4mm-sku-18282900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 L 72 teeth belt width 100=25.4mm SKU: 18282700](https://maedler.in/product/neoprene-timing-belt-270-l-72-teeth-belt-width-10025-4mm-sku-18282700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 255 L 68 teeth belt width 100=25.4mm SKU: 18282600](https://maedler.in/product/neoprene-timing-belt-255-l-68-teeth-belt-width-10025-4mm-sku-18282600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 L 64 teeth belt width 100=25.4mm SKU: 18282400](https://maedler.in/product/neoprene-timing-belt-240-l-64-teeth-belt-width-10025-4mm-sku-18282400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 225 L 60 teeth belt width 100=25.4mm SKU: 18282200](https://maedler.in/product/neoprene-timing-belt-225-l-60-teeth-belt-width-10025-4mm-sku-18282200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 210 L 56 teeth belt width 100=25.4mm SKU: 18282100](https://maedler.in/product/neoprene-timing-belt-210-l-56-teeth-belt-width-10025-4mm-sku-18282100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 187 L 50 teeth belt width 100=25.4mm SKU: 18281900](https://maedler.in/product/neoprene-timing-belt-187-l-50-teeth-belt-width-10025-4mm-sku-18281900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 150 L 40 teeth belt width 100=25.4mm SKU: 18281500](https://maedler.in/product/neoprene-timing-belt-150-l-40-teeth-belt-width-10025-4mm-sku-18281500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 124 L 33 teeth belt width 100=25.4mm SKU: 18281200](https://maedler.in/product/neoprene-timing-belt-124-l-33-teeth-belt-width-10025-4mm-sku-18281200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt L=3/8" (9.525mm) width 100=25.4mm open length SKU: 18280000](https://maedler.in/product/neoprene-timing-belt-l3-8-9-525mm-width-10025-4mm-open-length-sku-18280000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium L belt width 075=19.1mm SKU: 18279900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-l-belt-width-07519-1mm-sku-18279900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 600 L 160 teeth belt width 075=19.1mm SKU: 18276000](https://maedler.in/product/neoprene-timing-belt-600-l-160-teeth-belt-width-07519-1mm-sku-18276000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 L 144 teeth belt width 075=19.1mm SKU: 18275400](https://maedler.in/product/neoprene-timing-belt-540-l-144-teeth-belt-width-07519-1mm-sku-18275400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 L 136 teeth belt width 075=19.1mm SKU: 18275100](https://maedler.in/product/neoprene-timing-belt-510-l-136-teeth-belt-width-07519-1mm-sku-18275100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 L 128 teeth belt width 075=19.1mm SKU: 18274800](https://maedler.in/product/neoprene-timing-belt-480-l-128-teeth-belt-width-07519-1mm-sku-18274800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 L 120 teeth belt width 075=19.1mm SKU: 18274500](https://maedler.in/product/neoprene-timing-belt-450-l-120-teeth-belt-width-07519-1mm-sku-18274500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 L 112 teeth belt width 075=19.1mm SKU: 18274200](https://maedler.in/product/neoprene-timing-belt-420-l-112-teeth-belt-width-07519-1mm-sku-18274200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile L = 3/8" = 9.525 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium H belt width 100=25.4mm SKU: 18469900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-h-belt-width-10025-4mm-sku-18469900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 1400 H 280 teeth belt width 100=25.4mm SKU: 18467800](https://maedler.in/product/neoprene-timing-belt-1400-h-280-teeth-belt-width-10025-4mm-sku-18467800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1250 H 250 teeth belt width 100=25.4mm SKU: 18466900](https://maedler.in/product/neoprene-timing-belt-1250-h-250-teeth-belt-width-10025-4mm-sku-18466900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1100 H 220 teeth belt width 100=25.4mm SKU: 18466100](https://maedler.in/product/neoprene-timing-belt-1100-h-220-teeth-belt-width-10025-4mm-sku-18466100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1000 H 200 teeth belt width 100=25.4mm SKU: 18465600](https://maedler.in/product/neoprene-timing-belt-1000-h-200-teeth-belt-width-10025-4mm-sku-18465600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 900 H 180 teeth belt width 100=25.4mm SKU: 18465000](https://maedler.in/product/neoprene-timing-belt-900-h-180-teeth-belt-width-10025-4mm-sku-18465000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 850 H 170 teeth belt width 100=25.4mm SKU: 18464700](https://maedler.in/product/neoprene-timing-belt-850-h-170-teeth-belt-width-10025-4mm-sku-18464700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 800 H 160 teeth belt width 100=25.4mm SKU: 18464500](https://maedler.in/product/neoprene-timing-belt-800-h-160-teeth-belt-width-10025-4mm-sku-18464500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 750 H 150 teeth belt width 100=25.4mm SKU: 18464300](https://maedler.in/product/neoprene-timing-belt-750-h-150-teeth-belt-width-10025-4mm-sku-18464300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 700 H 140 teeth belt width 100=25.4mm SKU: 18464100](https://maedler.in/product/neoprene-timing-belt-700-h-140-teeth-belt-width-10025-4mm-sku-18464100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 660 H 132 teeth belt width 100=25.4mm SKU: 18463900](https://maedler.in/product/neoprene-timing-belt-660-h-132-teeth-belt-width-10025-4mm-sku-18463900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 630 H 126 teeth belt width 100=25.4mm SKU: 18463700](https://maedler.in/product/neoprene-timing-belt-630-h-126-teeth-belt-width-10025-4mm-sku-18463700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 600 H 120 teeth belt width 100=25.4mm SKU: 18463500](https://maedler.in/product/neoprene-timing-belt-600-h-120-teeth-belt-width-10025-4mm-sku-18463500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 570 H 114 teeth belt width 100=25.4mm SKU: 18463300](https://maedler.in/product/neoprene-timing-belt-570-h-114-teeth-belt-width-10025-4mm-sku-18463300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 H 108 teeth belt width 100=25.4mm SKU: 18463100](https://maedler.in/product/neoprene-timing-belt-540-h-108-teeth-belt-width-10025-4mm-sku-18463100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 H 102 teeth belt width 100=25.4mm SKU: 18462900](https://maedler.in/product/neoprene-timing-belt-510-h-102-teeth-belt-width-10025-4mm-sku-18462900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 H 96 teeth belt width 100=25.4mm SKU: 18462700](https://maedler.in/product/neoprene-timing-belt-480-h-96-teeth-belt-width-10025-4mm-sku-18462700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 H 90 teeth belt width 100=25.4mm SKU: 18462500](https://maedler.in/product/neoprene-timing-belt-450-h-90-teeth-belt-width-10025-4mm-sku-18462500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 H 84 teeth belt width 100=25.4mm SKU: 18462400](https://maedler.in/product/neoprene-timing-belt-420-h-84-teeth-belt-width-10025-4mm-sku-18462400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 H 78 teeth belt width 100=25.4mm SKU: 18462200](https://maedler.in/product/neoprene-timing-belt-390-h-78-teeth-belt-width-10025-4mm-sku-18462200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 360 H 72 teeth belt width 100=25.4mm SKU: 18462000](https://maedler.in/product/neoprene-timing-belt-360-h-72-teeth-belt-width-10025-4mm-sku-18462000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 330 H 66 teeth belt width 100=25.4mm SKU: 18461900](https://maedler.in/product/neoprene-timing-belt-330-h-66-teeth-belt-width-10025-4mm-sku-18461900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 H 60 teeth belt width 100=25.4mm SKU: 18461700](https://maedler.in/product/neoprene-timing-belt-300-h-60-teeth-belt-width-10025-4mm-sku-18461700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 H 54 teeth belt width 100=25.4mm SKU: 18461500](https://maedler.in/product/neoprene-timing-belt-270-h-54-teeth-belt-width-10025-4mm-sku-18461500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 H 48 teeth belt width 100=25.4mm SKU: 18461300](https://maedler.in/product/neoprene-timing-belt-240-h-48-teeth-belt-width-10025-4mm-sku-18461300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt H=1/2" (12.7mm) width 100=25.4mm open length SKU: 18460000](https://maedler.in/product/neoprene-timing-belt-h1-2-12-7mm-width-10025-4mm-open-length-sku-18460000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium H belt width 075=19.1mm SKU: 18459900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-h-belt-width-07519-1mm-sku-18459900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 1400 H 280 teeth belt width 075=19.1mm SKU: 18457800](https://maedler.in/product/neoprene-timing-belt-1400-h-280-teeth-belt-width-07519-1mm-sku-18457800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1250 H 250 teeth belt width 075=19.1mm SKU: 18456900](https://maedler.in/product/neoprene-timing-belt-1250-h-250-teeth-belt-width-07519-1mm-sku-18456900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1100 H 220 teeth belt width 075=19.1mm SKU: 18456100](https://maedler.in/product/neoprene-timing-belt-1100-h-220-teeth-belt-width-07519-1mm-sku-18456100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1000 H 200 teeth belt width 075=19.1mm SKU: 18455600](https://maedler.in/product/neoprene-timing-belt-1000-h-200-teeth-belt-width-07519-1mm-sku-18455600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 900 H 180 teeth belt width 075=19.1mm SKU: 18455000](https://maedler.in/product/neoprene-timing-belt-900-h-180-teeth-belt-width-07519-1mm-sku-18455000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 850 H 170 teeth belt width 075=19.1mm SKU: 18454700](https://maedler.in/product/neoprene-timing-belt-850-h-170-teeth-belt-width-07519-1mm-sku-18454700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 800 H 160 teeth belt width 075=19.1mm SKU: 18454500](https://maedler.in/product/neoprene-timing-belt-800-h-160-teeth-belt-width-07519-1mm-sku-18454500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 750 H 150 teeth belt width 075=19.1mm SKU: 18454300](https://maedler.in/product/neoprene-timing-belt-750-h-150-teeth-belt-width-07519-1mm-sku-18454300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 700 H 140 teeth belt width 075=19.1mm SKU: 18454100](https://maedler.in/product/neoprene-timing-belt-700-h-140-teeth-belt-width-07519-1mm-sku-18454100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 660 H 132 teeth belt width 075=19.1mm SKU: 18453900](https://maedler.in/product/neoprene-timing-belt-660-h-132-teeth-belt-width-07519-1mm-sku-18453900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 630 H 126 teeth belt width 075=19.1mm SKU: 18453700](https://maedler.in/product/neoprene-timing-belt-630-h-126-teeth-belt-width-07519-1mm-sku-18453700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 600 H 120 teeth belt width 075=19.1mm SKU: 18453500](https://maedler.in/product/neoprene-timing-belt-600-h-120-teeth-belt-width-07519-1mm-sku-18453500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 570 H 114 teeth belt width 075=19.1mm SKU: 18453300](https://maedler.in/product/neoprene-timing-belt-570-h-114-teeth-belt-width-07519-1mm-sku-18453300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 H 108 teeth belt width 075=19.1mm SKU: 18453100](https://maedler.in/product/neoprene-timing-belt-540-h-108-teeth-belt-width-07519-1mm-sku-18453100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 H 102 teeth belt width 075=19.1mm SKU: 18452900](https://maedler.in/product/neoprene-timing-belt-510-h-102-teeth-belt-width-07519-1mm-sku-18452900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 H 96 teeth belt width 075=19.1mm SKU: 18452700](https://maedler.in/product/neoprene-timing-belt-480-h-96-teeth-belt-width-07519-1mm-sku-18452700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 H 90 teeth belt width 075=19.1mm SKU: 18452500](https://maedler.in/product/neoprene-timing-belt-450-h-90-teeth-belt-width-07519-1mm-sku-18452500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 H 84 teeth belt width 075=19.1mm SKU: 18452400](https://maedler.in/product/neoprene-timing-belt-420-h-84-teeth-belt-width-07519-1mm-sku-18452400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 H 78 teeth belt width 075=19.1mm SKU: 18452200](https://maedler.in/product/neoprene-timing-belt-390-h-78-teeth-belt-width-07519-1mm-sku-18452200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 360 H 72 teeth belt width 075=19.1mm SKU: 18452000](https://maedler.in/product/neoprene-timing-belt-360-h-72-teeth-belt-width-07519-1mm-sku-18452000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 330 H 66 teeth belt width 075=19.1mm SKU: 18451900](https://maedler.in/product/neoprene-timing-belt-330-h-66-teeth-belt-width-07519-1mm-sku-18451900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 H 60 teeth belt width 075=19.1mm SKU: 18451700](https://maedler.in/product/neoprene-timing-belt-300-h-60-teeth-belt-width-07519-1mm-sku-18451700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 H 54 teeth belt width 075=19.1mm SKU: 18451500](https://maedler.in/product/neoprene-timing-belt-270-h-54-teeth-belt-width-07519-1mm-sku-18451500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 H 48 teeth belt width 075=19.1mm SKU: 18451300](https://maedler.in/product/neoprene-timing-belt-240-h-48-teeth-belt-width-07519-1mm-sku-18451300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 075 = 19.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt H=1/2" (12.7mm) width 075=19.1mm open length SKU: 18450000](https://maedler.in/product/neoprene-timing-belt-h1-2-12-7mm-width-07519-1mm-open-length-sku-18450000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Timing belt pulley H material steel 40 teeth for belt width 200=50.8mm SKU: 18434000](https://maedler.in/product/timing-belt-pulley-h-material-steel-40-teeth-for-belt-width-20050-8mm-sku-18434000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 38 teeth for belt width 200=50.8mm SKU: 18433800](https://maedler.in/product/timing-belt-pulley-h-material-steel-38-teeth-for-belt-width-20050-8mm-sku-18433800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 36 teeth for belt width 200=50.8mm SKU: 18433600](https://maedler.in/product/timing-belt-pulley-h-material-steel-36-teeth-for-belt-width-20050-8mm-sku-18433600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 35 teeth for belt width 200=50.8mm SKU: 18433500](https://maedler.in/product/timing-belt-pulley-h-material-steel-35-teeth-for-belt-width-20050-8mm-sku-18433500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 34 teeth for belt width 200=50.8mm SKU: 18433400](https://maedler.in/product/timing-belt-pulley-h-material-steel-34-teeth-for-belt-width-20050-8mm-sku-18433400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 33 teeth for belt width 200=50.8mm SKU: 18433300](https://maedler.in/product/timing-belt-pulley-h-material-steel-33-teeth-for-belt-width-20050-8mm-sku-18433300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 32 teeth for belt width 200=50.8mm SKU: 18433200](https://maedler.in/product/timing-belt-pulley-h-material-steel-32-teeth-for-belt-width-20050-8mm-sku-18433200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 30 teeth for belt width 200=50.8mm SKU: 18433000](https://maedler.in/product/timing-belt-pulley-h-material-steel-30-teeth-for-belt-width-20050-8mm-sku-18433000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 28 teeth for belt width 200=50.8mm SKU: 18432800](https://maedler.in/product/timing-belt-pulley-h-material-steel-28-teeth-for-belt-width-20050-8mm-sku-18432800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 27 teeth for belt width 200=50.8mm SKU: 18432700](https://maedler.in/product/timing-belt-pulley-h-material-steel-27-teeth-for-belt-width-20050-8mm-sku-18432700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 26 teeth for belt width 200=50.8mm SKU: 18432600](https://maedler.in/product/timing-belt-pulley-h-material-steel-26-teeth-for-belt-width-20050-8mm-sku-18432600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 25 teeth for belt width 200=50.8mm SKU: 18432500](https://maedler.in/product/timing-belt-pulley-h-material-steel-25-teeth-for-belt-width-20050-8mm-sku-18432500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 24 teeth for belt width 200=50.8mm SKU: 18432400](https://maedler.in/product/timing-belt-pulley-h-material-steel-24-teeth-for-belt-width-20050-8mm-sku-18432400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 23 teeth for belt width 200=50.8mm SKU: 18432300](https://maedler.in/product/timing-belt-pulley-h-material-steel-23-teeth-for-belt-width-20050-8mm-sku-18432300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 22 teeth for belt width 200=50.8mm SKU: 18432200](https://maedler.in/product/timing-belt-pulley-h-material-steel-22-teeth-for-belt-width-20050-8mm-sku-18432200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 21 teeth for belt width 200=50.8mm SKU: 18432100](https://maedler.in/product/timing-belt-pulley-h-material-steel-21-teeth-for-belt-width-20050-8mm-sku-18432100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 20 teeth for belt width 200=50.8mm SKU: 18432000](https://maedler.in/product/timing-belt-pulley-h-material-steel-20-teeth-for-belt-width-20050-8mm-sku-18432000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 19 teeth for belt width 200=50.8mm SKU: 18431900](https://maedler.in/product/timing-belt-pulley-h-material-steel-19-teeth-for-belt-width-20050-8mm-sku-18431900/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 18 teeth for belt width 200=50.8mm SKU: 18431800](https://maedler.in/product/timing-belt-pulley-h-material-steel-18-teeth-for-belt-width-20050-8mm-sku-18431800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 17 teeth for belt width 200=50.8mm SKU: 18431700](https://maedler.in/product/timing-belt-pulley-h-material-steel-17-teeth-for-belt-width-20050-8mm-sku-18431700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 16 teeth for belt width 200=50.8mm SKU: 18431600](https://maedler.in/product/timing-belt-pulley-h-material-steel-16-teeth-for-belt-width-20050-8mm-sku-18431600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 15 teeth for belt width 200=50.8mm SKU: 18431500](https://maedler.in/product/timing-belt-pulley-h-material-steel-15-teeth-for-belt-width-20050-8mm-sku-18431500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 14 teeth for belt width 200=50.8mm SKU: 18431400](https://maedler.in/product/timing-belt-pulley-h-material-steel-14-teeth-for-belt-width-20050-8mm-sku-18431400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. - [Timing belt pulley H material steel 40 teeth for belt width 150=38.1mm SKU: 18424000](https://maedler.in/product/timing-belt-pulley-h-material-steel-40-teeth-for-belt-width-15038-1mm-sku-18424000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 38 teeth for belt width 150=38.1mm SKU: 18423800](https://maedler.in/product/timing-belt-pulley-h-material-steel-38-teeth-for-belt-width-15038-1mm-sku-18423800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 36 teeth for belt width 150=38.1mm SKU: 18423600](https://maedler.in/product/timing-belt-pulley-h-material-steel-36-teeth-for-belt-width-15038-1mm-sku-18423600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 35 teeth for belt width 150=38.1mm SKU: 18423500](https://maedler.in/product/timing-belt-pulley-h-material-steel-35-teeth-for-belt-width-15038-1mm-sku-18423500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 34 teeth for belt width 150=38.1mm SKU: 18423400](https://maedler.in/product/timing-belt-pulley-h-material-steel-34-teeth-for-belt-width-15038-1mm-sku-18423400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 33 teeth for belt width 150=38.1mm SKU: 18423300](https://maedler.in/product/timing-belt-pulley-h-material-steel-33-teeth-for-belt-width-15038-1mm-sku-18423300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 32 teeth for belt width 150=38.1mm SKU: 18423200](https://maedler.in/product/timing-belt-pulley-h-material-steel-32-teeth-for-belt-width-15038-1mm-sku-18423200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 30 teeth for belt width 150=38.1mm SKU: 18423000](https://maedler.in/product/timing-belt-pulley-h-material-steel-30-teeth-for-belt-width-15038-1mm-sku-18423000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 28 teeth for belt width 150=38.1mm SKU: 18422800](https://maedler.in/product/timing-belt-pulley-h-material-steel-28-teeth-for-belt-width-15038-1mm-sku-18422800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 27 teeth for belt width 150=38.1mm SKU: 18422700](https://maedler.in/product/timing-belt-pulley-h-material-steel-27-teeth-for-belt-width-15038-1mm-sku-18422700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 26 teeth for belt width 150=38.1mm SKU: 18422600](https://maedler.in/product/timing-belt-pulley-h-material-steel-26-teeth-for-belt-width-15038-1mm-sku-18422600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 25 teeth for belt width 150=38.1mm SKU: 18422500](https://maedler.in/product/timing-belt-pulley-h-material-steel-25-teeth-for-belt-width-15038-1mm-sku-18422500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 24 teeth for belt width 150=38.1mm SKU: 18422400](https://maedler.in/product/timing-belt-pulley-h-material-steel-24-teeth-for-belt-width-15038-1mm-sku-18422400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 23 teeth for belt width 150=38.1mm SKU: 18422300](https://maedler.in/product/timing-belt-pulley-h-material-steel-23-teeth-for-belt-width-15038-1mm-sku-18422300/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 22 teeth for belt width 150=38.1mm SKU: 18422200](https://maedler.in/product/timing-belt-pulley-h-material-steel-22-teeth-for-belt-width-15038-1mm-sku-18422200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 21 teeth for belt width 150=38.1mm SKU: 18422100](https://maedler.in/product/timing-belt-pulley-h-material-steel-21-teeth-for-belt-width-15038-1mm-sku-18422100/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 20 teeth for belt width 150=38.1mm SKU: 18422000](https://maedler.in/product/timing-belt-pulley-h-material-steel-20-teeth-for-belt-width-15038-1mm-sku-18422000/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 19 teeth for belt width 150=38.1mm SKU: 18421900](https://maedler.in/product/timing-belt-pulley-h-material-steel-19-teeth-for-belt-width-15038-1mm-sku-18421900/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 18 teeth for belt width 150=38.1mm SKU: 18421800](https://maedler.in/product/timing-belt-pulley-h-material-steel-18-teeth-for-belt-width-15038-1mm-sku-18421800/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 17 teeth for belt width 150=38.1mm SKU: 18421700](https://maedler.in/product/timing-belt-pulley-h-material-steel-17-teeth-for-belt-width-15038-1mm-sku-18421700/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 16 teeth for belt width 150=38.1mm SKU: 18421600](https://maedler.in/product/timing-belt-pulley-h-material-steel-16-teeth-for-belt-width-15038-1mm-sku-18421600/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 15 teeth for belt width 150=38.1mm SKU: 18421500](https://maedler.in/product/timing-belt-pulley-h-material-steel-15-teeth-for-belt-width-15038-1mm-sku-18421500/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material steel 14 teeth for belt width 150=38.1mm SKU: 18421400](https://maedler.in/product/timing-belt-pulley-h-material-steel-14-teeth-for-belt-width-15038-1mm-sku-18421400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. - [Timing belt pulley H material grey cast iron 84 teeth for belt width 100=25.4mm SKU: 18418400](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-84-teeth-for-belt-width-10025-4mm-sku-18418400/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Timing belt pulley H material grey cast iron 72 teeth for belt width 100=25.4mm SKU: 18417200](https://maedler.in/product/timing-belt-pulley-h-material-grey-cast-iron-72-teeth-for-belt-width-10025-4mm-sku-18417200/): Material: Up to a Teeth Number of 40 phosphated steel, from a Teeth Number of 44 grey cast iron GG25 (on request). Pre-bored. Profile H = 1/2" = 12.7 mm. Belt width 100 = 25.4 mm. - [Locking assembly BAR stainless steel 1.4401 bore 28mm SKU: 61599428](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-28mm-sku-61599428/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 25mm SKU: 61599425](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-25mm-sku-61599425/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 24mm SKU: 61599424](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-24mm-sku-61599424/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 22mm SKU: 61599422](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-22mm-sku-61599422/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 20mm SKU: 61599420](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-20mm-sku-61599420/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 19mm SKU: 61599419](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-19mm-sku-61599419/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 18mm SKU: 61599418](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-18mm-sku-61599418/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 17mm SKU: 61599417](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-17mm-sku-61599417/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 16mm SKU: 61599416](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-16mm-sku-61599416/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 15mm SKU: 61599415](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-15mm-sku-61599415/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 14mm SKU: 61599414](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-14mm-sku-61599414/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 12mm SKU: 61599412](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-12mm-sku-61599412/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 11mm SKU: 61599411](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-11mm-sku-61599411/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 10mm SKU: 61599410](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-10mm-sku-61599410/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 9mm SKU: 61599409](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-9mm-sku-61599409/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 8mm SKU: 61599408](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-8mm-sku-61599408/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 7mm SKU: 61599407](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-7mm-sku-61599407/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 6mm SKU: 61599406](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-6mm-sku-61599406/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Clamping bush MSD-N stainless steel bore 50mm max. torque 1550Nm SKU: 61599350](https://maedler.in/product/clamping-bush-msd-n-stainless-steel-bore-50mm-max-torque-1550nm-sku-61599350/): Material: Stainless steel 1.4568 (17/7 PH). The MSD-N clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: 0,03 - 0,06 mm. Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7. Advantages: fast mounting/demounting sensitive adjustment of the hub can be carried out during assembly - low fastening torque and few screws allow very simple assembly. good concentricity small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. The dimensions refer to bushes before assembly. - [Clamping bush MSD-N stainless steel bore 40mm max. torque 750Nm SKU: 61599340](https://maedler.in/product/clamping-bush-msd-n-stainless-steel-bore-40mm-max-torque-750nm-sku-61599340/): Material: Stainless steel 1.4568 (17/7 PH). The MSD-N clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: 0,03 - 0,06 mm. Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7. Advantages: fast mounting/demounting sensitive adjustment of the hub can be carried out during assembly - low fastening torque and few screws allow very simple assembly. good concentricity small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. The dimensions refer to bushes before assembly. - [Clamping bush MSD-N stainless steel bore 30mm max. torque 350Nm SKU: 61599330](https://maedler.in/product/clamping-bush-msd-n-stainless-steel-bore-30mm-max-torque-350nm-sku-61599330/): Material: Stainless steel 1.4568 (17/7 PH). The MSD-N clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: 0,03 - 0,06 mm. Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7. Advantages: fast mounting/demounting sensitive adjustment of the hub can be carried out during assembly - low fastening torque and few screws allow very simple assembly. good concentricity small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. The dimensions refer to bushes before assembly. - [Clamping bush MSD-N stainless steel bore 25mm max. torque 210Nm SKU: 61599325](https://maedler.in/product/clamping-bush-msd-n-stainless-steel-bore-25mm-max-torque-210nm-sku-61599325/): Material: Stainless steel 1.4568 (17/7 PH). The MSD-N clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: 0,03 - 0,06 mm. Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7. Advantages: fast mounting/demounting sensitive adjustment of the hub can be carried out during assembly - low fastening torque and few screws allow very simple assembly. good concentricity small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. The dimensions refer to bushes before assembly. - [Clamping bush MSD-N stainless steel bore 20mm max. torque 100 Nm SKU: 61599320](https://maedler.in/product/clamping-bush-msd-n-stainless-steel-bore-20mm-max-torque-100-nm-sku-61599320/): Material: Stainless steel 1.4568 (17/7 PH). The MSD-N clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: 0,03 - 0,06 mm. Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7. Advantages: fast mounting/demounting sensitive adjustment of the hub can be carried out during assembly - low fastening torque and few screws allow very simple assembly. good concentricity small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. The dimensions refer to bushes before assembly. - [Clamping bush MSD-N stainless steel bore 15mm max. torque 45 Nm SKU: 61599315](https://maedler.in/product/clamping-bush-msd-n-stainless-steel-bore-15mm-max-torque-45-nm-sku-61599315/): Material: Stainless steel 1.4568 (17/7 PH). The MSD-N clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: 0,03 - 0,06 mm. Tolerance: Shaft h9 (Ø 15 mm only h8), Hub H7. Advantages: fast mounting/demounting sensitive adjustment of the hub can be carried out during assembly - low fastening torque and few screws allow very simple assembly. good concentricity small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. The dimensions refer to bushes before assembly. - [Clamping bush MSM-N stainless steel bore 14mm max. torque 48Nm SKU: 61599214](https://maedler.in/product/clamping-bush-msm-n-stainless-steel-bore-14mm-max-torque-48nm-sku-61599214/): Material: Stainless steel 1.4305 (AISI 303). Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Clamping bush MSM-N stainless steel bore 12mm max. torque 27Nm SKU: 61599212](https://maedler.in/product/clamping-bush-msm-n-stainless-steel-bore-12mm-max-torque-27nm-sku-61599212/): Material: Stainless steel 1.4305 (AISI 303). Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Clamping bush MSM-N stainless steel bore 10mm max. torque 23Nm SKU: 61599210](https://maedler.in/product/clamping-bush-msm-n-stainless-steel-bore-10mm-max-torque-23nm-sku-61599210/): Material: Stainless steel 1.4305 (AISI 303). Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Clamping bush MSM-N stainless steel bore 8mm max. torque 17Nm SKU: 61599208](https://maedler.in/product/clamping-bush-msm-n-stainless-steel-bore-8mm-max-torque-17nm-sku-61599208/): Material: Stainless steel 1.4305 (AISI 303). Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Clamping bush MSM-N stainless steel bore 6mm max. torque 5Nm SKU: 61599206](https://maedler.in/product/clamping-bush-msm-n-stainless-steel-bore-6mm-max-torque-5nm-sku-61599206/): Material: Stainless steel 1.4305 (AISI 303). Concentricity: about 0,02 mm. Tolerance: Shaft k6-h10, Hub H8. Mounting: The bush is mounted quickly. Just place the bush inside the hub and push both onto the shaft. Fasten with Allen key. Demounting: Remove tensioning screws. Put screws in forcing thread and fasten them until the bush is pressed off. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. - [Locking assembly COM-C bore 60mm size 60-90 stainless steel 1.4401 SKU: 61597160](https://maedler.in/product/locking-assembly-com-c-bore-60mm-size-60-90-stainless-steel-1-4401-sku-61597160/): Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.• Concentricity: 0.02 to 0.04 mm.• Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 50mm size 50-80 stainless steel 1.4401 SKU: 61597150](https://maedler.in/product/locking-assembly-com-c-bore-50mm-size-50-80-stainless-steel-1-4401-sku-61597150/): Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.• Concentricity: 0.02 to 0.04 mm.• Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 45mm size 45-75 stainless steel 1.4401 SKU: 61597145](https://maedler.in/product/locking-assembly-com-c-bore-45mm-size-45-75-stainless-steel-1-4401-sku-61597145/): Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.• Concentricity: 0.02 to 0.04 mm.• Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 40mm size 40-65 stainless steel 1.4401 SKU: 61597140](https://maedler.in/product/locking-assembly-com-c-bore-40mm-size-40-65-stainless-steel-1-4401-sku-61597140/): Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.• Concentricity: 0.02 to 0.04 mm.• Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 35mm size 35-60 stainless steel 1.4401 SKU: 61597135](https://maedler.in/product/locking-assembly-com-c-bore-35mm-size-35-60-stainless-steel-1-4401-sku-61597135/): Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.• Concentricity: 0.02 to 0.04 mm.• Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 30mm size 30-55 stainless steel 1.4401 SKU: 61597130](https://maedler.in/product/locking-assembly-com-c-bore-30mm-size-30-55-stainless-steel-1-4401-sku-61597130/): Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.• Concentricity: 0.02 to 0.04 mm.• Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 25mm size 25-50 stainless steel 1.4401 SKU: 61597125](https://maedler.in/product/locking-assembly-com-c-bore-25mm-size-25-50-stainless-steel-1-4401-sku-61597125/): Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.• Concentricity: 0.02 to 0.04 mm.• Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 24mm size 24-50 stainless steel 1.4401 SKU: 61597124](https://maedler.in/product/locking-assembly-com-c-bore-24mm-size-24-50-stainless-steel-1-4401-sku-61597124/): Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.• Concentricity: 0.02 to 0.04 mm.• Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Locking assembly COM-C bore 20mm size 20-47 stainless steel 1.4401 SKU: 61597120](https://maedler.in/product/locking-assembly-com-c-bore-20mm-size-20-47-stainless-steel-1-4401-sku-61597120/): Material: Stainless steel 1.4401 (AISI 316).• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.• For medium torques.• Self-centering.• No axial offset.• Concentricity: 0.02 to 0.04 mm.• Shaft h8, Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. - [Clamping bush E bore 60mm SKU: 61596000](https://maedler.in/product/clamping-bush-e-bore-60mm-sku-61596000/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 50mm SKU: 61595000](https://maedler.in/product/clamping-bush-e-bore-50mm-sku-61595000/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 48mm SKU: 61594800](https://maedler.in/product/clamping-bush-e-bore-48mm-sku-61594800/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 45mm SKU: 61594500](https://maedler.in/product/clamping-bush-e-bore-45mm-sku-61594500/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 40mm SKU: 61594000](https://maedler.in/product/clamping-bush-e-bore-40mm-sku-61594000/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 38mm SKU: 61593800](https://maedler.in/product/clamping-bush-e-bore-38mm-sku-61593800/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 35mm SKU: 61593500](https://maedler.in/product/clamping-bush-e-bore-35mm-sku-61593500/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 32mm SKU: 61593200](https://maedler.in/product/clamping-bush-e-bore-32mm-sku-61593200/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 31.75mm SKU: 61593175](https://maedler.in/product/clamping-bush-e-bore-31-75mm-sku-61593175/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 30mm SKU: 61593000](https://maedler.in/product/clamping-bush-e-bore-30mm-sku-61593000/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 28mm SKU: 61592800](https://maedler.in/product/clamping-bush-e-bore-28mm-sku-61592800/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 25.4mm SKU: 61592540](https://maedler.in/product/clamping-bush-e-bore-25-4mm-sku-61592540/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 25mm SKU: 61592500](https://maedler.in/product/clamping-bush-e-bore-25mm-sku-61592500/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 24mm SKU: 61592400](https://maedler.in/product/clamping-bush-e-bore-24mm-sku-61592400/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 22mm SKU: 61592200](https://maedler.in/product/clamping-bush-e-bore-22mm-sku-61592200/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 20mm SKU: 61592000](https://maedler.in/product/clamping-bush-e-bore-20mm-sku-61592000/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 19.05mm SKU: 61591905](https://maedler.in/product/clamping-bush-e-bore-19-05mm-sku-61591905/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 19mm SKU: 61591900](https://maedler.in/product/clamping-bush-e-bore-19mm-sku-61591900/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 15.875mm SKU: 61591587](https://maedler.in/product/clamping-bush-e-bore-15-875mm-sku-61591587/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Clamping bush E bore 15mm SKU: 61591500](https://maedler.in/product/clamping-bush-e-bore-15mm-sku-61591500/): Material: high-quality steel The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. * with coated surface Temperature range: -30° to +85°C. - [Locking assembly ST-K bore 100mm size 100x150x120mm SKU: 61588100](https://maedler.in/product/locking-assembly-st-k-bore-100mm-size-100x150x120mm-sku-61588100/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 95mm size 95x140x120mm SKU: 61588095](https://maedler.in/product/locking-assembly-st-k-bore-95mm-size-95x140x120mm-sku-61588095/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 90mm size 90x135x100mm SKU: 61588090](https://maedler.in/product/locking-assembly-st-k-bore-90mm-size-90x135x100mm-sku-61588090/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 85mm size 85x130x100mm SKU: 61588085](https://maedler.in/product/locking-assembly-st-k-bore-85mm-size-85x130x100mm-sku-61588085/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 80mm size 80x125x100mm SKU: 61588080](https://maedler.in/product/locking-assembly-st-k-bore-80mm-size-80x125x100mm-sku-61588080/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 75mm size 75x125x100mm SKU: 61588075](https://maedler.in/product/locking-assembly-st-k-bore-75mm-size-75x125x100mm-sku-61588075/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 70mm size 70x125x100mm SKU: 61588070](https://maedler.in/product/locking-assembly-st-k-bore-70mm-size-70x125x100mm-sku-61588070/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 65mm size 65x105x85mm SKU: 61588065](https://maedler.in/product/locking-assembly-st-k-bore-65mm-size-65x105x85mm-sku-61588065/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 60mm size 60x105x85mm SKU: 61588060](https://maedler.in/product/locking-assembly-st-k-bore-60mm-size-60x105x85mm-sku-61588060/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 55mm size 55x105x85mm SKU: 61588055](https://maedler.in/product/locking-assembly-st-k-bore-55mm-size-55x105x85mm-sku-61588055/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 50mm size 50x90x85mm SKU: 61588050](https://maedler.in/product/locking-assembly-st-k-bore-50mm-size-50x90x85mm-sku-61588050/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 48mm size 48x90x85mm SKU: 61588048](https://maedler.in/product/locking-assembly-st-k-bore-48mm-size-48x90x85mm-sku-61588048/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 45mm size 45x90x85mm SKU: 61588045](https://maedler.in/product/locking-assembly-st-k-bore-45mm-size-45x90x85mm-sku-61588045/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 42mm size 42x90x75mm SKU: 61588042](https://maedler.in/product/locking-assembly-st-k-bore-42mm-size-42x90x75mm-sku-61588042/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 40mm size 40x75x75mm SKU: 61588040](https://maedler.in/product/locking-assembly-st-k-bore-40mm-size-40x75x75mm-sku-61588040/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 38mm size 38x75x75mm SKU: 61588038](https://maedler.in/product/locking-assembly-st-k-bore-38mm-size-38x75x75mm-sku-61588038/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 35mm size 35x75x75mm SKU: 61588035](https://maedler.in/product/locking-assembly-st-k-bore-35mm-size-35x75x75mm-sku-61588035/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 32mm size 32x75x60mm SKU: 61588032](https://maedler.in/product/locking-assembly-st-k-bore-32mm-size-32x75x60mm-sku-61588032/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 30mm size 30x60x60mm SKU: 61588030](https://maedler.in/product/locking-assembly-st-k-bore-30mm-size-30x60x60mm-sku-61588030/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 28mm size 28x60x60mm SKU: 61588028](https://maedler.in/product/locking-assembly-st-k-bore-28mm-size-28x60x60mm-sku-61588028/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 25mm size 25x55x60mm SKU: 61588025](https://maedler.in/product/locking-assembly-st-k-bore-25mm-size-25x55x60mm-sku-61588025/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 24mm size 24x55x60mm SKU: 61588024](https://maedler.in/product/locking-assembly-st-k-bore-24mm-size-24x55x60mm-sku-61588024/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 22mm size 22x55x60mm SKU: 61588022](https://maedler.in/product/locking-assembly-st-k-bore-22mm-size-22x55x60mm-sku-61588022/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 20mm size 20x50x50mm SKU: 61588020](https://maedler.in/product/locking-assembly-st-k-bore-20mm-size-20x50x50mm-sku-61588020/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 19mm size 19x50x50mm SKU: 61588019](https://maedler.in/product/locking-assembly-st-k-bore-19mm-size-19x50x50mm-sku-61588019/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 18mm size 18x50x50mm SKU: 61588018](https://maedler.in/product/locking-assembly-st-k-bore-18mm-size-18x50x50mm-sku-61588018/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 17mm size 17x50x50mm SKU: 61588017](https://maedler.in/product/locking-assembly-st-k-bore-17mm-size-17x50x50mm-sku-61588017/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 16mm size 16x45x50mm SKU: 61588016](https://maedler.in/product/locking-assembly-st-k-bore-16mm-size-16x45x50mm-sku-61588016/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Locking assembly ST-K bore 15mm size 15x45x50mm SKU: 61588015](https://maedler.in/product/locking-assembly-st-k-bore-15mm-size-15x45x50mm-sku-61588015/): Material: Steel.For connecting two shafts, as a rigid coupling.For medium torques.Easy to mount.Self-releasing at dismountingNo axial offset during mounting.Fit: Shaft h8, Hub H8.Surface roughness hub / shaft max. 12.5µm.More sizes up to d=110mm for 7,400Nm are available.Price and delivery time on request. - [Shrink disc ST inner diameter 75mm SKU: 61587500](https://maedler.in/product/shrink-disc-st-inner-diameter-75mm-sku-61587500/): Material: High quality steel 42CrMo4.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disk ST-B inner diameter 85mm SKU: 61587085](https://maedler.in/product/shrink-disk-st-b-inner-diameter-85mm-sku-61587085/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 80mm SKU: 61587080](https://maedler.in/product/shrink-disk-st-b-inner-diameter-80mm-sku-61587080/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 75mm SKU: 61587075](https://maedler.in/product/shrink-disk-st-b-inner-diameter-75mm-sku-61587075/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 68mm SKU: 61587068](https://maedler.in/product/shrink-disk-st-b-inner-diameter-68mm-sku-61587068/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 62mm SKU: 61587062](https://maedler.in/product/shrink-disk-st-b-inner-diameter-62mm-sku-61587062/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 55mm SKU: 61587055](https://maedler.in/product/shrink-disk-st-b-inner-diameter-55mm-sku-61587055/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 50mm SKU: 61587050](https://maedler.in/product/shrink-disk-st-b-inner-diameter-50mm-sku-61587050/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 44mm SKU: 61587044](https://maedler.in/product/shrink-disk-st-b-inner-diameter-44mm-sku-61587044/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 36mm SKU: 61587036](https://maedler.in/product/shrink-disk-st-b-inner-diameter-36mm-sku-61587036/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 30mm SKU: 61587030](https://maedler.in/product/shrink-disk-st-b-inner-diameter-30mm-sku-61587030/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 24mm SKU: 61587024](https://maedler.in/product/shrink-disk-st-b-inner-diameter-24mm-sku-61587024/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Shrink disk ST-B inner diameter 16mm SKU: 61587016](https://maedler.in/product/shrink-disk-st-b-inner-diameter-16mm-sku-61587016/): Material: Steel. Characteristics: - High torques. - No axial shaft-hub movement. - Quick mounting. - Quick demounting. Tolerances, Surface Roughness: Highest permissible surface roughness: Rt=12.5µm. Largest permissible tolerances for the shaft: h8. Tolerances for dw/d: H8 / h8. Axial Displacement: No axial movement between hub and shaft can occur while fastening the screws. Other sizes up to inner diameter 300mm on request. - [Sprocket KRS with hub pitch 6mm 21 teeth material steel SKU: 10062100](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-21-teeth-material-steel-sku-10062100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 20 teeth material steel SKU: 10062000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-20-teeth-material-steel-sku-10062000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 19 teeth material steel SKU: 10061900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-19-teeth-material-steel-sku-10061900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 18 teeth material steel SKU: 10061800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-18-teeth-material-steel-sku-10061800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 17 teeth material steel SKU: 10061700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-17-teeth-material-steel-sku-10061700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 16 teeth material steel SKU: 10061600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-16-teeth-material-steel-sku-10061600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 15 teeth material steel SKU: 10061500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-15-teeth-material-steel-sku-10061500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 14 teeth material steel SKU: 10061400](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-14-teeth-material-steel-sku-10061400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 13 teeth material steel SKU: 10061300](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-13-teeth-material-steel-sku-10061300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 12 teeth material steel SKU: 10061200](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-12-teeth-material-steel-sku-10061200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 11 teeth material steel SKU: 10061100](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-11-teeth-material-steel-sku-10061100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 10 teeth material steel SKU: 10061000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-10-teeth-material-steel-sku-10061000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 9 teeth material steel SKU: 10060900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-9-teeth-material-steel-sku-10060900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 8 teeth material steel SKU: 10060800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-8-teeth-material-steel-sku-10060800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 25 teeth material polyacetal resin SKU: 10057500](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-25-teeth-material-polyacetal-resin-sku-10057500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 23 teeth material polyacetal resin SKU: 10057300](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-23-teeth-material-polyacetal-resin-sku-10057300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 21 teeth material polyacetal resin SKU: 10057100](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-21-teeth-material-polyacetal-resin-sku-10057100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 19 teeth material polyacetal resin SKU: 10056900](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-19-teeth-material-polyacetal-resin-sku-10056900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 17 teeth material polyacetal resin SKU: 10056700](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-17-teeth-material-polyacetal-resin-sku-10056700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 15 teeth material polyacetal resin SKU: 10056500](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-15-teeth-material-polyacetal-resin-sku-10056500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 8mm 13 teeth material polyacetal resin SKU: 10056300](https://maedler.in/product/sprocket-krk-with-hub-pitch-8mm-13-teeth-material-polyacetal-resin-sku-10056300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 25 teeth material polyacetal resin SKU: 10052500](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-25-teeth-material-polyacetal-resin-sku-10052500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 23 teeth material polyacetal resin SKU: 10052300](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-23-teeth-material-polyacetal-resin-sku-10052300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 21 teeth material polyacetal resin SKU: 10052100](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-21-teeth-material-polyacetal-resin-sku-10052100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 19 teeth material polyacetal resin SKU: 10051900](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-19-teeth-material-polyacetal-resin-sku-10051900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 17 teeth material polyacetal resin SKU: 10051700](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-17-teeth-material-polyacetal-resin-sku-10051700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 15 teeth material polyacetal resin SKU: 10051500](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-15-teeth-material-polyacetal-resin-sku-10051500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRK with hub pitch 6mm 13 teeth material polyacetal resin SKU: 10051300](https://maedler.in/product/sprocket-krk-with-hub-pitch-6mm-13-teeth-material-polyacetal-resin-sku-10051300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 2,6 mm, c = 0,6 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 57 teeth material steel SKU: 10035700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-57-teeth-material-steel-sku-10035700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 45 teeth material steel SKU: 10034500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-45-teeth-material-steel-sku-10034500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 40 teeth material steel SKU: 10034000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-40-teeth-material-steel-sku-10034000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 39 teeth material steel SKU: 10033900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-39-teeth-material-steel-sku-10033900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 38 teeth material steel SKU: 10033800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-38-teeth-material-steel-sku-10033800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 37 teeth material steel SKU: 10033700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-37-teeth-material-steel-sku-10033700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 36 teeth material steel SKU: 10033600](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-36-teeth-material-steel-sku-10033600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 35 teeth material steel SKU: 10033500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-35-teeth-material-steel-sku-10033500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 34 teeth material steel SKU: 10033400](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-34-teeth-material-steel-sku-10033400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 33 teeth material steel SKU: 10033300](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-33-teeth-material-steel-sku-10033300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 32 teeth material steel SKU: 10033200](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-32-teeth-material-steel-sku-10033200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 31 teeth material steel SKU: 10033100](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-31-teeth-material-steel-sku-10033100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 30 teeth material steel SKU: 10033000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-30-teeth-material-steel-sku-10033000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 29 teeth material steel SKU: 10032900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-29-teeth-material-steel-sku-10032900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 28 teeth material steel SKU: 10032800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-28-teeth-material-steel-sku-10032800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 27 teeth material steel SKU: 10032700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-27-teeth-material-steel-sku-10032700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 26 teeth material steel SKU: 10032600](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-26-teeth-material-steel-sku-10032600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 25 teeth material steel SKU: 10032500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-25-teeth-material-steel-sku-10032500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 24 teeth material steel SKU: 10032400](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-24-teeth-material-steel-sku-10032400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 23 teeth material steel SKU: 10032300](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-23-teeth-material-steel-sku-10032300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 22 teeth material steel SKU: 10032200](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-22-teeth-material-steel-sku-10032200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 21 teeth material steel SKU: 10032100](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-21-teeth-material-steel-sku-10032100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 20 teeth material steel SKU: 10032000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-20-teeth-material-steel-sku-10032000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 19 teeth material steel SKU: 10031900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-19-teeth-material-steel-sku-10031900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 18 teeth material steel SKU: 10031800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-18-teeth-material-steel-sku-10031800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 17 teeth material steel SKU: 10031700](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-17-teeth-material-steel-sku-10031700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 16 teeth material steel SKU: 10031600](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-16-teeth-material-steel-sku-10031600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 15 teeth material steel SKU: 10031500](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-15-teeth-material-steel-sku-10031500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 14 teeth material steel SKU: 10031400](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-14-teeth-material-steel-sku-10031400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 13 teeth material steel SKU: 10031300](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-13-teeth-material-steel-sku-10031300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 12 teeth material steel SKU: 10031200](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-12-teeth-material-steel-sku-10031200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 11 teeth material steel SKU: 10031100](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-11-teeth-material-steel-sku-10031100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 10 teeth material steel SKU: 10031000](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-10-teeth-material-steel-sku-10031000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 09 teeth material steel SKU: 10030900](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-09-teeth-material-steel-sku-10030900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 5mm 8 teeth material steel SKU: 10030800](https://maedler.in/product/sprocket-krs-with-hub-pitch-5mm-8-teeth-material-steel-sku-10030800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1= 2,3 mm, c= 0,5 mm, r3= 5 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 95 teeth material steel SKU: 10008300](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-95-teeth-material-steel-sku-10008300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 76 teeth material steel SKU: 10007600](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-76-teeth-material-steel-sku-10007600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 57 teeth material steel SKU: 10005700](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-57-teeth-material-steel-sku-10005700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 45 teeth material steel SKU: 10004500](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-45-teeth-material-steel-sku-10004500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 38 teeth material steel SKU: 10003800](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-38-teeth-material-steel-sku-10003800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 30 teeth material steel SKU: 10003000](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-30-teeth-material-steel-sku-10003000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 25 teeth material steel SKU: 10002500](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-25-teeth-material-steel-sku-10002500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 24 teeth material steel SKU: 10002400](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-24-teeth-material-steel-sku-10002400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 23 teeth material steel SKU: 10002300](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-23-teeth-material-steel-sku-10002300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 21 teeth material steel SKU: 10002100](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-21-teeth-material-steel-sku-10002100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 19 teeth material steel SKU: 10001900](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-19-teeth-material-steel-sku-10001900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 17 teeth material steel SKU: 10001700](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-17-teeth-material-steel-sku-10001700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 15 teeth material steel SKU: 10001500](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-15-teeth-material-steel-sku-10001500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 14 teeth material steel SKU: 10001400](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-14-teeth-material-steel-sku-10001400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 13 teeth material steel SKU: 10001300](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-13-teeth-material-steel-sku-10001300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 4mm 12 teeth material steel SKU: 10001200](https://maedler.in/product/sprocket-krs-with-hub-pitch-4mm-12-teeth-material-steel-sku-10001200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 2,45 mm, c = 0,33 mm, r3 = 3,75 mm. Other dimensions: See the table. - [Retaining ring DIN 472 17mm spr. steel SKU: 61761700](https://maedler.in/product/retaining-ring-din-472-17mm-spr-steel-sku-61761700/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 16mm spr. steel SKU: 61761600](https://maedler.in/product/retaining-ring-din-472-16mm-spr-steel-sku-61761600/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 15mm spr. steel SKU: 61761500](https://maedler.in/product/retaining-ring-din-472-15mm-spr-steel-sku-61761500/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 14mm spr. steel SKU: 61761400](https://maedler.in/product/retaining-ring-din-472-14mm-spr-steel-sku-61761400/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 13mm spr. steel SKU: 61761300](https://maedler.in/product/retaining-ring-din-472-13mm-spr-steel-sku-61761300/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 12mm spr. steel SKU: 61761200](https://maedler.in/product/retaining-ring-din-472-12mm-spr-steel-sku-61761200/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 11mm spr. steel SKU: 61761100](https://maedler.in/product/retaining-ring-din-472-11mm-spr-steel-sku-61761100/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 10mm spr. steel SKU: 61761000](https://maedler.in/product/retaining-ring-din-472-10mm-spr-steel-sku-61761000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 8mm spr. steel SKU: 61760800](https://maedler.in/product/retaining-ring-din-472-8mm-spr-steel-sku-61760800/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 471 75mm spr. steel SKU: 61747500](https://maedler.in/product/retaining-ring-din-471-75mm-spr-steel-sku-61747500/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 62mm spr. steel SKU: 61746200](https://maedler.in/product/retaining-ring-din-471-62mm-spr-steel-sku-61746200/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 60mm spr. steel SKU: 61746000](https://maedler.in/product/retaining-ring-din-471-60mm-spr-steel-sku-61746000/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 55mm spr. steel SKU: 61745500](https://maedler.in/product/retaining-ring-din-471-55mm-spr-steel-sku-61745500/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 50mm spr. steel SKU: 61745000](https://maedler.in/product/retaining-ring-din-471-50mm-spr-steel-sku-61745000/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 47mm spr. steel SKU: 61744700](https://maedler.in/product/retaining-ring-din-471-47mm-spr-steel-sku-61744700/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 45mm spr. steel SKU: 61744500](https://maedler.in/product/retaining-ring-din-471-45mm-spr-steel-sku-61744500/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 40mm spr. steel SKU: 61744000](https://maedler.in/product/retaining-ring-din-471-40mm-spr-steel-sku-61744000/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 38mm spr. steel SKU: 61743800](https://maedler.in/product/retaining-ring-din-471-38mm-spr-steel-sku-61743800/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 35mm spr. steel SKU: 61743500](https://maedler.in/product/retaining-ring-din-471-35mm-spr-steel-sku-61743500/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 32mm spr. steel SKU: 61743200](https://maedler.in/product/retaining-ring-din-471-32mm-spr-steel-sku-61743200/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 30mm spr. steel SKU: 61743000](https://maedler.in/product/retaining-ring-din-471-30mm-spr-steel-sku-61743000/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 28mm spr. steel SKU: 61742800](https://maedler.in/product/retaining-ring-din-471-28mm-spr-steel-sku-61742800/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 26mm spr. steel SKU: 61742600](https://maedler.in/product/retaining-ring-din-471-26mm-spr-steel-sku-61742600/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 25mm spr. steel SKU: 61742500](https://maedler.in/product/retaining-ring-din-471-25mm-spr-steel-sku-61742500/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 24mm spr. steel SKU: 61742400](https://maedler.in/product/retaining-ring-din-471-24mm-spr-steel-sku-61742400/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 22mm spr. steel SKU: 61742200](https://maedler.in/product/retaining-ring-din-471-22mm-spr-steel-sku-61742200/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 20mm spr. steel SKU: 61742000](https://maedler.in/product/retaining-ring-din-471-20mm-spr-steel-sku-61742000/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 19mm spr. steel SKU: 61741900](https://maedler.in/product/retaining-ring-din-471-19mm-spr-steel-sku-61741900/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 18mm spr. steel SKU: 61741800](https://maedler.in/product/retaining-ring-din-471-18mm-spr-steel-sku-61741800/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 17mm spr. steel SKU: 61741700](https://maedler.in/product/retaining-ring-din-471-17mm-spr-steel-sku-61741700/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 16mm spr. steel SKU: 61741600](https://maedler.in/product/retaining-ring-din-471-16mm-spr-steel-sku-61741600/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 15mm spr. steel SKU: 61741500](https://maedler.in/product/retaining-ring-din-471-15mm-spr-steel-sku-61741500/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 14mm spr. steel SKU: 61741400](https://maedler.in/product/retaining-ring-din-471-14mm-spr-steel-sku-61741400/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 12mm spr. steel SKU: 61741200](https://maedler.in/product/retaining-ring-din-471-12mm-spr-steel-sku-61741200/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 11mm spr. steel SKU: 61741100](https://maedler.in/product/retaining-ring-din-471-11mm-spr-steel-sku-61741100/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 10mm spr. steel SKU: 61741000](https://maedler.in/product/retaining-ring-din-471-10mm-spr-steel-sku-61741000/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 9mm spr. steel SKU: 61740900](https://maedler.in/product/retaining-ring-din-471-9mm-spr-steel-sku-61740900/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 8mm spr. steel SKU: 61740800](https://maedler.in/product/retaining-ring-din-471-8mm-spr-steel-sku-61740800/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 7mm spr. steel SKU: 61740700](https://maedler.in/product/retaining-ring-din-471-7mm-spr-steel-sku-61740700/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 6mm spr. steel SKU: 61740600](https://maedler.in/product/retaining-ring-din-471-6mm-spr-steel-sku-61740600/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 5mm spr. steel SKU: 61740500](https://maedler.in/product/retaining-ring-din-471-5mm-spr-steel-sku-61740500/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 4mm spr. steel SKU: 61740400](https://maedler.in/product/retaining-ring-din-471-4mm-spr-steel-sku-61740400/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Retaining ring DIN 471 3mm spr. steel SKU: 61740300](https://maedler.in/product/retaining-ring-din-471-3mm-spr-steel-sku-61740300/): Material: Feather steel, phosphated, oiled. External rings for axial fixing a machine part on a shaft. - [Clamping bush E-N bore 50mm SKU: 61599950](https://maedler.in/product/clamping-bush-e-n-bore-50mm-sku-61599950/): Material: Stainless steel 1.405 (AISI 431). The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. * with coated surface - [Clamping bush E-N bore 45mm SKU: 61599945](https://maedler.in/product/clamping-bush-e-n-bore-45mm-sku-61599945/): Material: Stainless steel 1.405 (AISI 431). The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. * with coated surface - [Clamping bush E-N bore 40mm SKU: 61599940](https://maedler.in/product/clamping-bush-e-n-bore-40mm-sku-61599940/): Material: Stainless steel 1.405 (AISI 431). The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. * with coated surface - [Clamping bush E-N bore 35mm SKU: 61599935](https://maedler.in/product/clamping-bush-e-n-bore-35mm-sku-61599935/): Material: Stainless steel 1.405 (AISI 431). The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. * with coated surface - [Clamping bush E-N bore 30mm SKU: 61599930](https://maedler.in/product/clamping-bush-e-n-bore-30mm-sku-61599930/): Material: Stainless steel 1.405 (AISI 431). The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. * with coated surface - [Clamping bush E-N bore 25mm SKU: 61599925](https://maedler.in/product/clamping-bush-e-n-bore-25mm-sku-61599925/): Material: Stainless steel 1.405 (AISI 431). The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. * with coated surface - [Clamping bush E-N bore 20mm SKU: 61599920](https://maedler.in/product/clamping-bush-e-n-bore-20mm-sku-61599920/): Material: Stainless steel 1.405 (AISI 431). The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. * with coated surface - [Clamping bush E-N bore 15mm SKU: 61599915](https://maedler.in/product/clamping-bush-e-n-bore-15mm-sku-61599915/): Material: Stainless steel 1.405 (AISI 431). The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression. Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled. Concentricity: 0,02 mm. Tolerances: Shaft h7 for d = 15 mm. Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm. Shaft h8 for the other diametres d. Hub H7. MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Fr = Maximum transmittable radial force. Manz = required fastening torque for the screws. Temperature range: -30° to +85°C. * with coated surface - [Shrink disc ST-R stainless steel 1.4057 inner diameter 68mm SKU: 61599868](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-68mm-sku-61599868/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 62mm SKU: 61599862](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-62mm-sku-61599862/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 55mm SKU: 61599855](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-55mm-sku-61599855/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 50mm SKU: 61599850](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-50mm-sku-61599850/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 44mm SKU: 61599844](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-44mm-sku-61599844/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 40mm SKU: 61599840](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-40mm-sku-61599840/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 36mm SKU: 61599836](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-36mm-sku-61599836/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 30mm SKU: 61599830](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-30mm-sku-61599830/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 24mm SKU: 61599824](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-24mm-sku-61599824/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 20mm SKU: 61599820](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-20mm-sku-61599820/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 16mm SKU: 61599816](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-16mm-sku-61599816/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Shrink disc ST-R stainless steel 1.4057 inner diameter 14mm SKU: 61599814](https://maedler.in/product/shrink-disc-st-r-stainless-steel-1-4057-inner-diameter-14mm-sku-61599814/): Material: Stainless steel 1.4057 (AISI 431).For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium torques.Quick mounting.Quick dismounting.No axial offset during mounting.Roughness: max, RZ=16 μm. Outer-Ø tolerance of hub = H9.Recommended tolerances for hub bore / shaft diameter: from dw Ø 30 = H6/j6; Ø 31-50 = H6/h6; Ø 51-65 = H6/g6.It is essential to degrease the contact surfaces of shaft and hub bore. Lubricate only the shrink disk and the screws with MoS2 and place it on the hub. Turn in the screws evenly by hand. Surface Roughness, Tolerances and Mounting Fasten the tensioning screws evenly, in sequence (not crossing over) until the fastening torque TA of the table is reached. To reach the value of TA, several fastening steps are required. The figures for T stated in the table were calculated for a lubricated shrink disk. - [Locking assembly COM-B stainless steel 1.4401 bore 50mm size 50-65 SKU: 61599650](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-50mm-size-50-65-sku-61599650/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 45mm size 45-59 SKU: 61599645](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-45mm-size-45-59-sku-61599645/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 40mm size 40-53 SKU: 61599640](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-40mm-size-40-53-sku-61599640/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 38mm size 38-50 SKU: 61599638](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-38mm-size-38-50-sku-61599638/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 35mm size 35-47 SKU: 61599635](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-35mm-size-35-47-sku-61599635/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 32mm size 32-43 SKU: 61599632](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-32mm-size-32-43-sku-61599632/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 30mm size 30-41 SKU: 61599630](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-30mm-size-30-41-sku-61599630/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 28mm size 28-39 SKU: 61599628](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-28mm-size-28-39-sku-61599628/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 25mm size 25-34 SKU: 61599625](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-25mm-size-25-34-sku-61599625/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 24mm size 24-34 SKU: 61599624](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-24mm-size-24-34-sku-61599624/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 22mm size 22-32 SKU: 61599622](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-22mm-size-22-32-sku-61599622/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 20mm size 20-28 SKU: 61599620](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-20mm-size-20-28-sku-61599620/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 19mm size 19-27 SKU: 61599619](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-19mm-size-19-27-sku-61599619/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 18mm size 18-26 SKU: 61599618](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-18mm-size-18-26-sku-61599618/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 16mm size 16-24 SKU: 61599616](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-16mm-size-16-24-sku-61599616/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 15mm size 15-24 SKU: 61599615](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-15mm-size-15-24-sku-61599615/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 14mm size 14-22 SKU: 61599614](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-14mm-size-14-22-sku-61599614/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 12mm size 12-18 SKU: 61599612](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-12mm-size-12-18-sku-61599612/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-B stainless steel 1.4401 bore 10mm size 10-16 SKU: 61599610](https://maedler.in/product/locking-assembly-com-b-stainless-steel-1-4401-bore-10mm-size-10-16-sku-61599610/): Material: Stainless steel 1.4401 (AISI 316). Self-centering clamping bush for small hub diametres. For low torques. Self-locking. No axial movement during mounting. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange, until the flange is released. - [Locking assembly COM-A stainless steel 1.4401 bore 75mm size 75-115 SKU: 61599580](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-75mm-size-75-115-sku-61599580/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 75mm size 75-115 SKU: 61599575](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-75mm-size-75-115-sku-61599575/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 70mm size 70-110 SKU: 61599570](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-70mm-size-70-110-sku-61599570/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 65mm size 65-95 SKU: 61599565](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-65mm-size-65-95-sku-61599565/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 60mm size 60-90 SKU: 61599560](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-60mm-size-60-90-sku-61599560/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 55mm size 55-85 SKU: 61599555](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-55mm-size-55-85-sku-61599555/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 35mm size 35-60 SKU: 61599535](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-35mm-size-35-60-sku-61599535/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 32mm size 32-60 SKU: 61599532](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-32mm-size-32-60-sku-61599532/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 28mm size 28-55 SKU: 61599528](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-28mm-size-28-55-sku-61599528/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 25mm size 25-50 SKU: 61599525](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-25mm-size-25-50-sku-61599525/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 17mm size 17-44 SKU: 61599517](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-17mm-size-17-44-sku-61599517/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly COM-A stainless steel 1.4401 bore 16mm size 16-44 SKU: 61599516](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-16mm-size-16-44-sku-61599516/): Material: Stainless steel 1.4401 (AISI 316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub - [Locking assembly BAR stainless steel 1.4401 bore 50mm SKU: 61599450](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-50mm-sku-61599450/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 40mm SKU: 61599440](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-40mm-sku-61599440/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 38mm SKU: 61599438](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-38mm-sku-61599438/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 35mm SKU: 61599435](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-35mm-sku-61599435/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 32mm SKU: 61599432](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-32mm-sku-61599432/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Locking assembly BAR stainless steel 1.4401 bore 30mm SKU: 61599430](https://maedler.in/product/locking-assembly-bar-stainless-steel-1-4401-bore-30mm-sku-61599430/): Material: Stainless steel 1.4401 (AISI 316). For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. Stainless steel. For low torques. Self-centering. Slight axial offset possible during assembly. Fit, Surface: Due to the special design of the BAR clamping set even rough fits can be bridged with excellent self centering capacity. Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz < 10 µm. - [Spur gear made of steel 11SMnPb30 with hub module 1 25 teeth tooth width 10mm helical tooth 20° left handed outside diameter 28.6mm SKU: 21432500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-25-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-28-6mm-sku-21432500/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 24 teeth tooth width 10mm helical tooth 20° left handed outside diameter 27.5mm SKU: 21432400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-24-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-27-5mm-sku-21432400/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 20 teeth tooth width 10mm helical tooth 20° left handed outside diameter 23.3mm SKU: 21432000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-20-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-23-3mm-sku-21432000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 18 teeth tooth width 10mm helical tooth 20° left handed outside diameter 21.2mm SKU: 21431800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-18-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-21-2mm-sku-21431800/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 15 teeth tooth width 10mm helical tooth 20° left handed outside diameter 18.0mm SKU: 21431500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-15-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-18-0mm-sku-21431500/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 10 teeth tooth width 10mm helical tooth 20° left handed outside diameter 12.6mm SKU: 21431000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-10-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-12-6mm-sku-21431000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 50 teeth tooth width 10mm helical tooth 20° right handed outside diameter 55.2mm SKU: 21425000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-50-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-55-2mm-sku-21425000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 40 teeth tooth width 10mm helical tooth 20° right handed outside diameter 44.6mm SKU: 21424000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-40-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-44-6mm-sku-21424000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 36 teeth tooth width 10mm helical tooth 20° right handed outside diameter 40.3mm SKU: 21423600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-36-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-40-3mm-sku-21423600/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 30 teeth tooth width 10mm helical tooth 20° right handed outside diameter 33.9mm SKU: 21423000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-30-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-33-9mm-sku-21423000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 25 teeth tooth width 10mm helical tooth 20° right handed outside diameter 28.6mm SKU: 21422500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-25-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-28-6mm-sku-21422500/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 24 teeth tooth width 10mm helical tooth 20° right handed outside diameter 27.5mm SKU: 21422400](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-24-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-27-5mm-sku-21422400/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 20 teeth tooth width 10mm helical tooth 20° right handed outside diameter 23.3mm SKU: 21422000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-20-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-23-3mm-sku-21422000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 18 teeth tooth width 10mm helical tooth 20° right handed outside diameter 21.2mm SKU: 21421800](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-18-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-21-2mm-sku-21421800/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 15 teeth tooth width 10mm helical tooth 20° right handed outside diameter 18.0mm SKU: 21421500](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-15-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-18-0mm-sku-21421500/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 10 teeth tooth width 10mm helical tooth 20° right handed outside diameter 12.6mm SKU: 21421000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-10-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-12-6mm-sku-21421000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Round gear rack made of stainless steel module 3.18 (metrical pitch 10mm) Ø 30mm h9 length 2000mm SKU: 21099634](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-o-30mm-h9-length-2000mm-sku-21099634/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of stainless steel module 3.18 (metrical pitch 10mm) Ø 30mm h9 length 1000mm SKU: 21099632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-o-30mm-h9-length-1000mm-sku-21099632/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of stainless steel module 3.18 (metrical pitch 10mm) Ø 30mm h9 length 500mm SKU: 21099631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-o-30mm-h9-length-500mm-sku-21099631/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Gear rack made of stainless steel module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 2000mm SKU: 21099609](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-2000mm-sku-21099609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 1000mm SKU: 21099605](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-1000mm-sku-21099605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 500mm SKU: 21099603](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-500mm-sku-21099603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 250mm SKU: 21099601](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-250mm-sku-21099601/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks stainless steel 1.4305 pitch 10mm tooth width 30mm height 30mm length approx. 127mm SKU: 21099600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-pitch-10mm-tooth-width-30mm-height-30mm-length-approx-127mm-sku-21099600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of steel module 3.18 (metrical pitch 10mm) Ø 30mm h6 length 2000mm SKU: 21063400](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-18-metrical-pitch-10mm-o-30mm-h6-length-2000mm-sku-21063400/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of steel module 3.18 (metrical pitch 10mm) Ø 30mm h6 length 1000mm SKU: 21063200](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-18-metrical-pitch-10mm-o-30mm-h6-length-1000mm-sku-21063200/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of steel module 3.18 (metrical pitch 10mm) Ø 30mm h6 length 500mm SKU: 21063100](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-18-metrical-pitch-10mm-o-30mm-h6-length-500mm-sku-21063100/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Gear rack steel C45K module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 2000mm SKU: 21060900](https://maedler.in/product/gear-rack-steel-c45k-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-2000mm-sku-21060900/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 1000mm SKU: 21060500](https://maedler.in/product/gear-rack-steel-c45k-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-1000mm-sku-21060500/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 500mm SKU: 21060300](https://maedler.in/product/gear-rack-steel-c45k-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-500mm-sku-21060300/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3.18 (metrical pitch 10mm) tooth width 30mm height 30mm length 250mm SKU: 21060100](https://maedler.in/product/gear-rack-steel-c45k-module-3-18-metrical-pitch-10mm-tooth-width-30mm-height-30mm-length-250mm-sku-21060100/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K pitch 10mm tooth width 30mm height 30mm length approx. 127mm SKU: 21060000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-pitch-10mm-tooth-width-30mm-height-30mm-length-approx-127mm-sku-21060000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of stainless steel module 1.59 (metrical pitch 5mm) Ø 15mm h9 length 2000mm SKU: 20599634](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-o-15mm-h9-length-2000mm-sku-20599634/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of stainless steel module 1.59 (metrical pitch 5mm) Ø 15mm h9 length 1000mm SKU: 20599632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-o-15mm-h9-length-1000mm-sku-20599632/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of stainless steel module 1.59 (metrical pitch 5mm) Ø 15mm h9 length 500mm SKU: 20599631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-o-15mm-h9-length-500mm-sku-20599631/): Material: Stainless steel 1.4305. Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Gear rack made of stainless steel module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 2000mm SKU: 20599609](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-2000mm-sku-20599609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 1000mm SKU: 20599605](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-1000mm-sku-20599605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 500mm SKU: 20599603](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-500mm-sku-20599603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of stainless steel module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 250mm SKU: 20599601](https://maedler.in/product/gear-rack-made-of-stainless-steel-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-250mm-sku-20599601/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks stainless steel 1.4305 pitch 5mm tooth width 15mm height 15mm length approx. 63mm SKU: 20599600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-pitch-5mm-tooth-width-15mm-height-15mm-length-approx-63mm-sku-20599600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of steel module 1.59 (metrical pitch 5mm) Ø 15mm h6 length 2000mm SKU: 20563400](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-59-metrical-pitch-5mm-o-15mm-h6-length-2000mm-sku-20563400/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of steel module 1.59 (metrical pitch 5mm) Ø 15mm h6 length 1000mm SKU: 20563200](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-59-metrical-pitch-5mm-o-15mm-h6-length-1000mm-sku-20563200/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Round gear rack made of steel module 1.59 (metrical pitch 5mm) Ø 15mm h6 length 500mm SKU: 20563100](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-59-metrical-pitch-5mm-o-15mm-h6-length-500mm-sku-20563100/): Material: Up to length 1500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. Pitch 5 mm = module 1.59. Pitch 10 mm = module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: Pitch 5 mm: -0.2 mm. Pitch 10 mm: -0.3 mm. - [Gear rack steel C45K module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 2000mm SKU: 20560900](https://maedler.in/product/gear-rack-steel-c45k-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-2000mm-sku-20560900/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 1000mm SKU: 20560500](https://maedler.in/product/gear-rack-steel-c45k-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-1000mm-sku-20560500/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 500mm SKU: 20560300](https://maedler.in/product/gear-rack-steel-c45k-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-500mm-sku-20560300/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.59 (metrical pitch 5mm) tooth width 15mm height 15mm length 250mm SKU: 20560100](https://maedler.in/product/gear-rack-steel-c45k-module-1-59-metrical-pitch-5mm-tooth-width-15mm-height-15mm-length-250mm-sku-20560100/): Material: Steel C45K. Milled teeth. Precisely Straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. Pitch 5 mm = Module 1.59. Pitch 10 mm = Module 3.18. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: At pitch 5mm: -0,2 mm. At pitch 10mm: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K pitch 5mm tooth width 15mm height 15mm length approx. 63mm SKU: 20560000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-pitch-5mm-tooth-width-15mm-height-15mm-length-approx-63mm-sku-20560000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Fixing plate for timing belts H belt width 200=50.8mm SKU: 18489900](https://maedler.in/product/fixing-plate-for-timing-belts-h-belt-width-20050-8mm-sku-18489900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 1400 H 280 teeth belt width 200=50.8mm SKU: 18487800](https://maedler.in/product/neoprene-timing-belt-1400-h-280-teeth-belt-width-20050-8mm-sku-18487800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1250 H 250 teeth belt width 200=50.8mm SKU: 18486900](https://maedler.in/product/neoprene-timing-belt-1250-h-250-teeth-belt-width-20050-8mm-sku-18486900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1100 H 220 teeth belt width 200=50.8mm SKU: 18486100](https://maedler.in/product/neoprene-timing-belt-1100-h-220-teeth-belt-width-20050-8mm-sku-18486100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1000 H 200 teeth belt width 200=50.8mm SKU: 18485600](https://maedler.in/product/neoprene-timing-belt-1000-h-200-teeth-belt-width-20050-8mm-sku-18485600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 900 H 180 teeth belt width 200=50.8mm SKU: 18485000](https://maedler.in/product/neoprene-timing-belt-900-h-180-teeth-belt-width-20050-8mm-sku-18485000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 850 H 170 teeth belt width 200=50.8mm SKU: 18484700](https://maedler.in/product/neoprene-timing-belt-850-h-170-teeth-belt-width-20050-8mm-sku-18484700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 800 H 160 teeth belt width 200=50.8mm SKU: 18484500](https://maedler.in/product/neoprene-timing-belt-800-h-160-teeth-belt-width-20050-8mm-sku-18484500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 750 H 150 teeth belt width 200=50.8mm SKU: 18484300](https://maedler.in/product/neoprene-timing-belt-750-h-150-teeth-belt-width-20050-8mm-sku-18484300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 700 H 140 teeth belt width 200=50.8mm SKU: 18484100](https://maedler.in/product/neoprene-timing-belt-700-h-140-teeth-belt-width-20050-8mm-sku-18484100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 660 H 132 teeth belt width 200=50.8mm SKU: 18483900](https://maedler.in/product/neoprene-timing-belt-660-h-132-teeth-belt-width-20050-8mm-sku-18483900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 630 H 126 teeth belt width 200=50.8mm SKU: 18483700](https://maedler.in/product/neoprene-timing-belt-630-h-126-teeth-belt-width-20050-8mm-sku-18483700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 600 H 120 teeth belt width 200=50.8mm SKU: 18483500](https://maedler.in/product/neoprene-timing-belt-600-h-120-teeth-belt-width-20050-8mm-sku-18483500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 570 H 114 teeth belt width 200=50.8mm SKU: 18483300](https://maedler.in/product/neoprene-timing-belt-570-h-114-teeth-belt-width-20050-8mm-sku-18483300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 H 108 teeth belt width 200=50.8mm SKU: 18483100](https://maedler.in/product/neoprene-timing-belt-540-h-108-teeth-belt-width-20050-8mm-sku-18483100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 H 102 teeth belt width 200=50.8mm SKU: 18482900](https://maedler.in/product/neoprene-timing-belt-510-h-102-teeth-belt-width-20050-8mm-sku-18482900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 H 96 teeth belt width 200=50.8mm SKU: 18482700](https://maedler.in/product/neoprene-timing-belt-480-h-96-teeth-belt-width-20050-8mm-sku-18482700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 H 90 teeth belt width 200=50.8mm SKU: 18482500](https://maedler.in/product/neoprene-timing-belt-450-h-90-teeth-belt-width-20050-8mm-sku-18482500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 H 84 teeth belt width 200=50.8mm SKU: 18482400](https://maedler.in/product/neoprene-timing-belt-420-h-84-teeth-belt-width-20050-8mm-sku-18482400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 H 78 teeth belt width 200=50.8mm SKU: 18482200](https://maedler.in/product/neoprene-timing-belt-390-h-78-teeth-belt-width-20050-8mm-sku-18482200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 360 H 72 teeth belt width 200=50.8mm SKU: 18482000](https://maedler.in/product/neoprene-timing-belt-360-h-72-teeth-belt-width-20050-8mm-sku-18482000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 330 H 66 teeth belt width 200=50.8mm SKU: 18481900](https://maedler.in/product/neoprene-timing-belt-330-h-66-teeth-belt-width-20050-8mm-sku-18481900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 H 60 teeth belt width 200=50.8mm SKU: 18481700](https://maedler.in/product/neoprene-timing-belt-300-h-60-teeth-belt-width-20050-8mm-sku-18481700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 H 54 teeth belt width 200=50.8mm SKU: 18481500](https://maedler.in/product/neoprene-timing-belt-270-h-54-teeth-belt-width-20050-8mm-sku-18481500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 H 48 teeth belt width 200=50.8mm SKU: 18481300](https://maedler.in/product/neoprene-timing-belt-240-h-48-teeth-belt-width-20050-8mm-sku-18481300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 200 = 50.8 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt H=1/2" (12.7mm) width 200=50.8mm open length SKU: 18480000](https://maedler.in/product/neoprene-timing-belt-h1-2-12-7mm-width-20050-8mm-open-length-sku-18480000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Fixing plate for timing belts material aluminium H belt width 150=38.1mm SKU: 18479900](https://maedler.in/product/fixing-plate-for-timing-belts-material-aluminium-h-belt-width-15038-1mm-sku-18479900/): Material: Aluminium similar EN AW2017A. The fixing plates are used to connect the belt ends. Only for reversible use between the pulleys. The plates must not run on the pulleys. - [Neoprene timing belt 1400 H 280 teeth belt width 150=38.1mm SKU: 18477800](https://maedler.in/product/neoprene-timing-belt-1400-h-280-teeth-belt-width-15038-1mm-sku-18477800/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1250 H 250 teeth belt width 150=38.1mm SKU: 18476900](https://maedler.in/product/neoprene-timing-belt-1250-h-250-teeth-belt-width-15038-1mm-sku-18476900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1100 H 220 teeth belt width 150=38.1mm SKU: 18476100](https://maedler.in/product/neoprene-timing-belt-1100-h-220-teeth-belt-width-15038-1mm-sku-18476100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 1000 H 200 teeth belt width 150=38.1mm SKU: 18475600](https://maedler.in/product/neoprene-timing-belt-1000-h-200-teeth-belt-width-15038-1mm-sku-18475600/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 900 H 180 teeth belt width 150=38.1mm SKU: 18475000](https://maedler.in/product/neoprene-timing-belt-900-h-180-teeth-belt-width-15038-1mm-sku-18475000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 850 H 170 teeth belt width 150=38.1mm SKU: 18474700](https://maedler.in/product/neoprene-timing-belt-850-h-170-teeth-belt-width-15038-1mm-sku-18474700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 800 H 160 teeth belt width 150=38.1mm SKU: 18474500](https://maedler.in/product/neoprene-timing-belt-800-h-160-teeth-belt-width-15038-1mm-sku-18474500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 750 H 150 teeth belt width 150=38.1mm SKU: 18474300](https://maedler.in/product/neoprene-timing-belt-750-h-150-teeth-belt-width-15038-1mm-sku-18474300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 700 H 140 teeth belt width 150=38.1mm SKU: 18474100](https://maedler.in/product/neoprene-timing-belt-700-h-140-teeth-belt-width-15038-1mm-sku-18474100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 660 H 132 teeth belt width 150=38.1mm SKU: 18473900](https://maedler.in/product/neoprene-timing-belt-660-h-132-teeth-belt-width-15038-1mm-sku-18473900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 630 H 126 teeth belt width 150=38.1mm SKU: 18473700](https://maedler.in/product/neoprene-timing-belt-630-h-126-teeth-belt-width-15038-1mm-sku-18473700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 600 H 120 teeth belt width 150=38.1mm SKU: 18473500](https://maedler.in/product/neoprene-timing-belt-600-h-120-teeth-belt-width-15038-1mm-sku-18473500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 570 H 114 teeth belt width 150=38.1mm SKU: 18473300](https://maedler.in/product/neoprene-timing-belt-570-h-114-teeth-belt-width-15038-1mm-sku-18473300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 540 H 108 teeth belt width 150=38.1mm SKU: 18473100](https://maedler.in/product/neoprene-timing-belt-540-h-108-teeth-belt-width-15038-1mm-sku-18473100/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 510 H 102 teeth belt width 150=38.1mm SKU: 18472900](https://maedler.in/product/neoprene-timing-belt-510-h-102-teeth-belt-width-15038-1mm-sku-18472900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 480 H 96 teeth belt width 150=38.1mm SKU: 18472700](https://maedler.in/product/neoprene-timing-belt-480-h-96-teeth-belt-width-15038-1mm-sku-18472700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 450 H 90 teeth belt width 150=38.1mm SKU: 18472500](https://maedler.in/product/neoprene-timing-belt-450-h-90-teeth-belt-width-15038-1mm-sku-18472500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 420 H 84 teeth belt width 150=38.1mm SKU: 18472400](https://maedler.in/product/neoprene-timing-belt-420-h-84-teeth-belt-width-15038-1mm-sku-18472400/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 390 H 78 teeth belt width 150=38.1mm SKU: 18472200](https://maedler.in/product/neoprene-timing-belt-390-h-78-teeth-belt-width-15038-1mm-sku-18472200/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 360 H 72 teeth belt width 150=38.1mm SKU: 18472000](https://maedler.in/product/neoprene-timing-belt-360-h-72-teeth-belt-width-15038-1mm-sku-18472000/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 330 H 66 teeth belt width 150=38.1mm SKU: 18471900](https://maedler.in/product/neoprene-timing-belt-330-h-66-teeth-belt-width-15038-1mm-sku-18471900/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 300 H 60 teeth belt width 150=38.1mm SKU: 18471700](https://maedler.in/product/neoprene-timing-belt-300-h-60-teeth-belt-width-15038-1mm-sku-18471700/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 270 H 54 teeth belt width 150=38.1mm SKU: 18471500](https://maedler.in/product/neoprene-timing-belt-270-h-54-teeth-belt-width-15038-1mm-sku-18471500/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt 240 H 48 teeth belt width 150=38.1mm SKU: 18471300](https://maedler.in/product/neoprene-timing-belt-240-h-48-teeth-belt-width-15038-1mm-sku-18471300/): Material: Neoprene with glas-fibre tensile member. Teeth surface fabric-coated. Timing belt with inch dimensions, classical shape with trapezoid teeth. Profile H = 1/2" = 12.7 mm. Belt width 150 = 38.1 mm. Temperature range -20º to +100ºC. - [Neoprene timing belt H=1/2" (12.7mm) width 150=38.1mm open length SKU: 18470000](https://maedler.in/product/neoprene-timing-belt-h1-2-12-7mm-width-15038-1mm-open-length-sku-18470000/): Material: Neoprene (black) with tensile member of glasfibre.Neoprene belts cannot be welded. Temperature range -20º to +100ºC. - [Retaining ring DIN 472 68mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799668](https://maedler.in/product/retaining-ring-din-472-68mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799668/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 62mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799662](https://maedler.in/product/retaining-ring-din-472-62mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799662/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 60mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799660](https://maedler.in/product/retaining-ring-din-472-60mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799660/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 58mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799658](https://maedler.in/product/retaining-ring-din-472-58mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799658/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 55mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799655](https://maedler.in/product/retaining-ring-din-472-55mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799655/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 52mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799652](https://maedler.in/product/retaining-ring-din-472-52mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799652/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 50mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799650](https://maedler.in/product/retaining-ring-din-472-50mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799650/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 47mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799647](https://maedler.in/product/retaining-ring-din-472-47mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799647/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 45mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799645](https://maedler.in/product/retaining-ring-din-472-45mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799645/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 42mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799642](https://maedler.in/product/retaining-ring-din-472-42mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799642/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 40mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799640](https://maedler.in/product/retaining-ring-din-472-40mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799640/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 38mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799638](https://maedler.in/product/retaining-ring-din-472-38mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799638/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 37mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799637](https://maedler.in/product/retaining-ring-din-472-37mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799637/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 35mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799635](https://maedler.in/product/retaining-ring-din-472-35mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799635/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 32mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799632](https://maedler.in/product/retaining-ring-din-472-32mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799632/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 30mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799630](https://maedler.in/product/retaining-ring-din-472-30mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799630/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 28mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799628](https://maedler.in/product/retaining-ring-din-472-28mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799628/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 26mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799626](https://maedler.in/product/retaining-ring-din-472-26mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799626/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 25mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799625](https://maedler.in/product/retaining-ring-din-472-25mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799625/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 24mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799624](https://maedler.in/product/retaining-ring-din-472-24mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799624/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 22mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799622](https://maedler.in/product/retaining-ring-din-472-22mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799622/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 21mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799621](https://maedler.in/product/retaining-ring-din-472-21mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799621/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 20mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799620](https://maedler.in/product/retaining-ring-din-472-20mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799620/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 19mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799619](https://maedler.in/product/retaining-ring-din-472-19mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799619/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 18mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799618](https://maedler.in/product/retaining-ring-din-472-18mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799618/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 17mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799617](https://maedler.in/product/retaining-ring-din-472-17mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799617/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 16mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799616](https://maedler.in/product/retaining-ring-din-472-16mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799616/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 15mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799615](https://maedler.in/product/retaining-ring-din-472-15mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799615/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 14mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799614](https://maedler.in/product/retaining-ring-din-472-14mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799614/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 13mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799613](https://maedler.in/product/retaining-ring-din-472-13mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799613/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 12mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799612](https://maedler.in/product/retaining-ring-din-472-12mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799612/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 11mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799611](https://maedler.in/product/retaining-ring-din-472-11mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799611/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 10mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799610](https://maedler.in/product/retaining-ring-din-472-10mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799610/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 8mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799608](https://maedler.in/product/retaining-ring-din-472-8mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799608/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 75mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799475](https://maedler.in/product/retaining-ring-din-471-75mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799475/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 62mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799462](https://maedler.in/product/retaining-ring-din-471-62mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799462/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 60mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799460](https://maedler.in/product/retaining-ring-din-471-60mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799460/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 55mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799455](https://maedler.in/product/retaining-ring-din-471-55mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799455/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 50mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799450](https://maedler.in/product/retaining-ring-din-471-50mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799450/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 47mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799447](https://maedler.in/product/retaining-ring-din-471-47mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799447/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 45mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799445](https://maedler.in/product/retaining-ring-din-471-45mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799445/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 40mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799440](https://maedler.in/product/retaining-ring-din-471-40mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799440/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 38mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799438](https://maedler.in/product/retaining-ring-din-471-38mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799438/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 35mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799435](https://maedler.in/product/retaining-ring-din-471-35mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799435/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 32mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799432](https://maedler.in/product/retaining-ring-din-471-32mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799432/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 30mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799430](https://maedler.in/product/retaining-ring-din-471-30mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799430/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 28mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799428](https://maedler.in/product/retaining-ring-din-471-28mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799428/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 26mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799426](https://maedler.in/product/retaining-ring-din-471-26mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799426/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 25mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799425](https://maedler.in/product/retaining-ring-din-471-25mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799425/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 24mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799424](https://maedler.in/product/retaining-ring-din-471-24mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799424/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 22mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799422](https://maedler.in/product/retaining-ring-din-471-22mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799422/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 20mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799420](https://maedler.in/product/retaining-ring-din-471-20mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799420/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 19mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799419](https://maedler.in/product/retaining-ring-din-471-19mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799419/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 18mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799418](https://maedler.in/product/retaining-ring-din-471-18mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799418/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 17mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799417](https://maedler.in/product/retaining-ring-din-471-17mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799417/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 16mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799416](https://maedler.in/product/retaining-ring-din-471-16mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799416/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 15mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799415](https://maedler.in/product/retaining-ring-din-471-15mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799415/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 14mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799414](https://maedler.in/product/retaining-ring-din-471-14mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799414/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 12mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799412](https://maedler.in/product/retaining-ring-din-471-12mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799412/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 11mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799411](https://maedler.in/product/retaining-ring-din-471-11mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799411/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 10mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799410](https://maedler.in/product/retaining-ring-din-471-10mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799410/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 9mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799409](https://maedler.in/product/retaining-ring-din-471-9mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799409/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 8mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799408](https://maedler.in/product/retaining-ring-din-471-8mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799408/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 7mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799407](https://maedler.in/product/retaining-ring-din-471-7mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799407/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 6mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799406](https://maedler.in/product/retaining-ring-din-471-6mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799406/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 5mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799405](https://maedler.in/product/retaining-ring-din-471-5mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799405/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 4mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799404](https://maedler.in/product/retaining-ring-din-471-4mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799404/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 471 3mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799403](https://maedler.in/product/retaining-ring-din-471-3mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799403/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part on a shaft. Note: The stainless steel version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 110mm spr. steel SKU: 61771000](https://maedler.in/product/retaining-ring-din-472-110mm-spr-steel-sku-61771000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 100mm spr. steel SKU: 61770000](https://maedler.in/product/retaining-ring-din-472-100mm-spr-steel-sku-61770000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 90mm spr. steel SKU: 61769000](https://maedler.in/product/retaining-ring-din-472-90mm-spr-steel-sku-61769000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 85mm spr. steel SKU: 61768500](https://maedler.in/product/retaining-ring-din-472-85mm-spr-steel-sku-61768500/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 80mm spr. steel SKU: 61768000](https://maedler.in/product/retaining-ring-din-472-80mm-spr-steel-sku-61768000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 75mm spr. steel SKU: 61767500](https://maedler.in/product/retaining-ring-din-472-75mm-spr-steel-sku-61767500/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 72mm spr. steel SKU: 61767200](https://maedler.in/product/retaining-ring-din-472-72mm-spr-steel-sku-61767200/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 68mm spr. steel SKU: 61766800](https://maedler.in/product/retaining-ring-din-472-68mm-spr-steel-sku-61766800/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 62mm spr. steel SKU: 61766200](https://maedler.in/product/retaining-ring-din-472-62mm-spr-steel-sku-61766200/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 60mm spr. steel SKU: 61766000](https://maedler.in/product/retaining-ring-din-472-60mm-spr-steel-sku-61766000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 58mm spr. steel SKU: 61765800](https://maedler.in/product/retaining-ring-din-472-58mm-spr-steel-sku-61765800/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 55mm spr. steel SKU: 61765500](https://maedler.in/product/retaining-ring-din-472-55mm-spr-steel-sku-61765500/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 52mm spr. steel SKU: 61765200](https://maedler.in/product/retaining-ring-din-472-52mm-spr-steel-sku-61765200/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 50mm spr. steel SKU: 61765000](https://maedler.in/product/retaining-ring-din-472-50mm-spr-steel-sku-61765000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 47mm spr. steel SKU: 61764700](https://maedler.in/product/retaining-ring-din-472-47mm-spr-steel-sku-61764700/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 45mm spr. steel SKU: 61764500](https://maedler.in/product/retaining-ring-din-472-45mm-spr-steel-sku-61764500/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 42mm spr. steel SKU: 61764200](https://maedler.in/product/retaining-ring-din-472-42mm-spr-steel-sku-61764200/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 40mm spr. steel SKU: 61764000](https://maedler.in/product/retaining-ring-din-472-40mm-spr-steel-sku-61764000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 38mm spr. steel SKU: 61763800](https://maedler.in/product/retaining-ring-din-472-38mm-spr-steel-sku-61763800/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 37mm spr. steel SKU: 61763700](https://maedler.in/product/retaining-ring-din-472-37mm-spr-steel-sku-61763700/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 35mm spr. steel SKU: 61763500](https://maedler.in/product/retaining-ring-din-472-35mm-spr-steel-sku-61763500/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 32mm spr. steel SKU: 61763200](https://maedler.in/product/retaining-ring-din-472-32mm-spr-steel-sku-61763200/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 30mm spr. steel SKU: 61763000](https://maedler.in/product/retaining-ring-din-472-30mm-spr-steel-sku-61763000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 28mm spr. steel SKU: 61762800](https://maedler.in/product/retaining-ring-din-472-28mm-spr-steel-sku-61762800/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 26mm spr. steel SKU: 61762600](https://maedler.in/product/retaining-ring-din-472-26mm-spr-steel-sku-61762600/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 25mm spr. steel SKU: 61762500](https://maedler.in/product/retaining-ring-din-472-25mm-spr-steel-sku-61762500/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 24mm spr. steel SKU: 61762400](https://maedler.in/product/retaining-ring-din-472-24mm-spr-steel-sku-61762400/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 22mm spr. steel SKU: 61762200](https://maedler.in/product/retaining-ring-din-472-22mm-spr-steel-sku-61762200/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 21mm spr. steel SKU: 61762100](https://maedler.in/product/retaining-ring-din-472-21mm-spr-steel-sku-61762100/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 20mm spr. steel SKU: 61762000](https://maedler.in/product/retaining-ring-din-472-20mm-spr-steel-sku-61762000/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 19mm spr. steel SKU: 61761900](https://maedler.in/product/retaining-ring-din-472-19mm-spr-steel-sku-61761900/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Retaining ring DIN 472 18mm spr. steel SKU: 61761800](https://maedler.in/product/retaining-ring-din-472-18mm-spr-steel-sku-61761800/): Material: Feather steel, phosphated, oiled. Internal rings for axial fixing a machine part inside a bore. - [Precision gear rack module 1.5 15x15x500mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 22868300](https://maedler.in/product/precision-gear-rack-module-1-5-15x15x500mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-22868300/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Mounting aid for gear racks steel C45KG module 1.5 tooth width 15mm height 15mm length approx. 60mm SKU: 22868000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45kg-module-1-5-tooth-width-15mm-height-15mm-length-approx-60mm-sku-22868000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of high strength steel module = 1,5 diameter = 15 mm h6 length = 1000 mm SKU: 22866632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-15-diameter-15-mm-h6-length-1000-mm-sku-22866632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 1,5 diameter = 15 mm h6 length = 500 mm SKU: 22866631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-15-diameter-15-mm-h6-length-500-mm-sku-22866631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel module 1.5 diameter 15mm h6 length 1000mm SKU: 22863200](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-5-diameter-15mm-h6-length-1000mm-sku-22863200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 1.5 diameter 15mm h6 length 500mm SKU: 22863100](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-5-diameter-15mm-h6-length-500mm-sku-22863100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1,5 diameter = 15 mm h6 length = 250 mm SKU: 22863000](https://maedler.in/product/round-gear-rack-made-of-steel-module-15-diameter-15-mm-h6-length-250-mm-sku-22863000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 1.5 tooth width 15mm height 15mm length 1500mm SKU: 22860700](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-15mm-height-15mm-length-1500mm-sku-22860700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 15mm height 15mm length 1000mm SKU: 22860500](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-15mm-height-15mm-length-1000mm-sku-22860500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 15mm height 15mm length 500mm SKU: 22860300](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-15mm-height-15mm-length-500mm-sku-22860300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 15mm height 10mm length 1000mm SKU: 22860100](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-15mm-height-10mm-length-1000mm-sku-22860100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of steel C45 module 1.5 90 teeth tooth width 15mm outside diameter 170mm SKU: 22849000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-90-teeth-tooth-width-15mm-outside-diameter-170mm-sku-22849000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 80 teeth tooth width 15mm outside diameter 150mm SKU: 22848000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-80-teeth-tooth-width-15mm-outside-diameter-150mm-sku-22848000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 72 teeth tooth width 15mm outside diameter 140mm SKU: 22847200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-72-teeth-tooth-width-15mm-outside-diameter-140mm-sku-22847200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 70 teeth tooth width 15mm outside diameter 135mm SKU: 22847000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-70-teeth-tooth-width-15mm-outside-diameter-135mm-sku-22847000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 60 teeth tooth width 15mm outside diameter 120mm SKU: 22846000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-60-teeth-tooth-width-15mm-outside-diameter-120mm-sku-22846000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 50 teeth tooth width 15mm outside diameter 105mm SKU: 22845000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-50-teeth-tooth-width-15mm-outside-diameter-105mm-sku-22845000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 48 teeth tooth width 15mm outside diameter 100mm SKU: 22844800](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-48-teeth-tooth-width-15mm-outside-diameter-100mm-sku-22844800/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 45 teeth tooth width 15mm outside diameter 100mm SKU: 22844500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-45-teeth-tooth-width-15mm-outside-diameter-100mm-sku-22844500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 40 teeth tooth width 15mm outside diameter 90mm SKU: 22844000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-40-teeth-tooth-width-15mm-outside-diameter-90mm-sku-22844000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 36 teeth tooth width 15mm outside diameter 85mm SKU: 22843600](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-36-teeth-tooth-width-15mm-outside-diameter-85mm-sku-22843600/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 30 teeth tooth width 15mm outside diameter 75mm SKU: 22843000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-30-teeth-tooth-width-15mm-outside-diameter-75mm-sku-22843000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 25 teeth tooth width 15mm outside diameter 70mm SKU: 22842500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-25-teeth-tooth-width-15mm-outside-diameter-70mm-sku-22842500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 120 teeth tooth width 15mm outside diameter 220mm SKU: 22841200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-120-teeth-tooth-width-15mm-outside-diameter-220mm-sku-22841200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1.5 100 teeth tooth width 15mm outside diameter 190mm SKU: 22841000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-5-100-teeth-tooth-width-15mm-outside-diameter-190mm-sku-22841000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 1.5 tooth width 17mm height 17mm nominal length 2000mm SKU: 22811619](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-5-tooth-width-17mm-height-17mm-nominal-length-2000mm-sku-22811619/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.5 tooth width 17mm height 17mm nominal length 1000mm SKU: 22811612](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-5-tooth-width-17mm-height-17mm-nominal-length-1000mm-sku-22811612/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.5 tooth width 15mm height 15mm nominal length 2000mm SKU: 22811609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-5-tooth-width-15mm-height-15mm-nominal-length-2000mm-sku-22811609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.5 tooth width 15mm height 15mm nominal length 1000mm SKU: 22811605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-5-tooth-width-15mm-height-15mm-nominal-length-1000mm-sku-22811605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 10mm height 10mm length 1000mm SKU: 22760500](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-10mm-height-10mm-length-1000mm-sku-22760500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.5 tooth width 10mm height 10mm length 500mm SKU: 22760100](https://maedler.in/product/gear-rack-steel-c45k-module-1-5-tooth-width-10mm-height-10mm-length-500mm-sku-22760100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 1.5 tooth width 10mm height 10mm length approx. 60mm SKU: 22760000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-1-5-tooth-width-10mm-height-10mm-length-approx-60mm-sku-22760000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 1.25 tooth width 10mm height 10mm length 1000mm SKU: 22660500](https://maedler.in/product/gear-rack-steel-c45k-module-1-25-tooth-width-10mm-height-10mm-length-1000mm-sku-22660500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.25 tooth width 10mm height 10mm length 500mm SKU: 22660300](https://maedler.in/product/gear-rack-steel-c45k-module-1-25-tooth-width-10mm-height-10mm-length-500mm-sku-22660300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1.25 tooth width 10mm height 10mm length 250mm SKU: 22660100](https://maedler.in/product/gear-rack-steel-c45k-module-1-25-tooth-width-10mm-height-10mm-length-250mm-sku-22660100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 1 diameter = 15 mm length = 1000 mm SKU: 22566632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-1-diameter-15-mm-length-1000-mm-sku-22566632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 1 diameter = 15 mm length = 500 mm SKU: 22566631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-1-diameter-15-mm-length-500-mm-sku-22566631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel, module = 1, diameter = 15 mm h6 length = 1000 mm SKU: 22563200](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-15-mm-h6-length-1000-mm-sku-22563200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1, diameter = 15 mm h6 length = 500 mm SKU: 22563100](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-15-mm-h6-length-500-mm-sku-22563100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1, diameter = 15 mm h6 length = 250 mm SKU: 22563000](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-15-mm-h6-length-250-mm-sku-22563000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of stainless steel 1.4305 module 1 diameter 10mm h9 length 1000mm SKU: 22499632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-1-diameter-10mm-h9-length-1000mm-sku-22499632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 1 diameter 10mm h9 length 500mm SKU: 22499631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-1-diameter-10mm-h9-length-500mm-sku-22499631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 15mm height 15mm length 1000mm SKU: 22499612](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-15mm-height-15mm-length-1000mm-sku-22499612/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 15mm height 15mm length 500mm SKU: 22499610](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-15mm-height-15mm-length-500mm-sku-22499610/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 15mm height 15mm length 250mm SKU: 22499609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-15mm-height-15mm-length-250mm-sku-22499609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 10mm height 10mm length 1000mm SKU: 22499608](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-10mm-height-10mm-length-1000mm-sku-22499608/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 10mm height 10mm length 500mm SKU: 22499605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-10mm-height-10mm-length-500mm-sku-22499605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1 tooth width 10mm height 10mm length 250mm SKU: 22499603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-tooth-width-10mm-height-10mm-length-250mm-sku-22499603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Internal gear made of 1.4305 (AISI303) module 1,0 90 teeth teeth width 10mm SKU: 22499490](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-90-teeth-teeth-width-10mm-sku-22499490/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 80 teeth teeth width 10mm SKU: 22499480](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-80-teeth-teeth-width-10mm-sku-22499480/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 72 teeth teeth width 10mm SKU: 22499472](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-72-teeth-teeth-width-10mm-sku-22499472/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 70 teeth teeth width 10mm SKU: 22499470](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-70-teeth-teeth-width-10mm-sku-22499470/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 60 teeth teeth width 10mm SKU: 22499460](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-60-teeth-teeth-width-10mm-sku-22499460/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 50 teeth teeth width 10mm SKU: 22499450](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-50-teeth-teeth-width-10mm-sku-22499450/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 48 teeth teeth width 10mm SKU: 22499448](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-48-teeth-teeth-width-10mm-sku-22499448/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 45 teeth teeth width 10mm SKU: 22499445](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-45-teeth-teeth-width-10mm-sku-22499445/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 40 teeth teeth width 10mm SKU: 22499440](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-40-teeth-teeth-width-10mm-sku-22499440/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 36 teeth teeth width 10mm SKU: 22499436](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-36-teeth-teeth-width-10mm-sku-22499436/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 30 teeth teeth width 10mm SKU: 22499430](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-30-teeth-teeth-width-10mm-sku-22499430/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 25 teeth teeth width 10mm SKU: 22499425](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-25-teeth-teeth-width-10mm-sku-22499425/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 120 teeth teeth width 10mm SKU: 22499412](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-120-teeth-teeth-width-10mm-sku-22499412/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of 1.4305 (AISI303) module 1,0 100 teeth teeth width 10mm SKU: 22499410](https://maedler.in/product/internal-gear-made-of-1-4305-aisi303-module-10-100-teeth-teeth-width-10mm-sku-22499410/): Material: Stainless steel 1.4305 (AISI 303).Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Precision gear rack module 1 15x15x500mm long material 16MnCr5 teeth induction hardened ground all-sides SKU: 22468300](https://maedler.in/product/precision-gear-rack-module-1-15x15x500mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sides-sku-22468300/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Round gear rack made of high strength steel module = 1 diameter = 10 mm h9 length = 1000 mm SKU: 22466632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-1-diameter-10-mm-h9-length-1000-mm-sku-22466632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 1 diameter = 10 mm h9 length = 500 mm SKU: 22466631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-1-diameter-10-mm-h9-length-500-mm-sku-22466631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Gear rack steel C45K module 1 width 10mm height 10mm length 1000mm helical tooth 20° left handed SKU: 22465800](https://maedler.in/product/gear-rack-steel-c45k-module-1-width-10mm-height-10mm-length-1000mm-helical-tooth-20-left-handed-sku-22465800/): Material: Steel C45K, milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention:These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Gear rack steel C45K module 1 width 10mm height 10mm length 500mm helical tooth 20° left handed SKU: 22465500](https://maedler.in/product/gear-rack-steel-c45k-module-1-width-10mm-height-10mm-length-500mm-helical-tooth-20-left-handed-sku-22465500/): Material: Steel C45K, milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention:These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Round gear rack made of steel module 1 diameter 10mm h6 length 1000mm SKU: 22463200](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-10mm-h6-length-1000mm-sku-22463200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 1 diameter 10mm h6 length 500mm SKU: 22463100](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-10mm-h6-length-500mm-sku-22463100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1, diameter = 10 mm h6 length = 250 mm SKU: 22463000](https://maedler.in/product/round-gear-rack-made-of-steel-module-1-diameter-10-mm-h6-length-250-mm-sku-22463000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 1 tooth width 15mm height 15mm length 1000mm SKU: 22461200](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-15mm-height-15mm-length-1000mm-sku-22461200/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1 tooth width 15mm height 15mm length 500mm SKU: 22461000](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-15mm-height-15mm-length-500mm-sku-22461000/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1 tooth width 10mm height 10mm length 1000mm SKU: 22460800](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-10mm-height-10mm-length-1000mm-sku-22460800/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K   module 1   tooth width 10mm height 10mm    length 500mm SKU: 22460500](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-10mm-height-10mm-length-500mm-sku-22460500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 1 tooth width 10mm height 10mm length 250mm SKU: 22460300](https://maedler.in/product/gear-rack-steel-c45k-module-1-tooth-width-10mm-height-10mm-length-250mm-sku-22460300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of steel C45 module 1 90 teeth tooth width 10mm outside diameter 115mm SKU: 22449000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-90-teeth-tooth-width-10mm-outside-diameter-115mm-sku-22449000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 80 teeth tooth width 10mm outside diameter 105mm SKU: 22448000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-80-teeth-tooth-width-10mm-outside-diameter-105mm-sku-22448000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 72 teeth tooth width 10mm outside diameter 100mm SKU: 22447200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-72-teeth-tooth-width-10mm-outside-diameter-100mm-sku-22447200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 70 teeth tooth width 10mm outside diameter 95mm SKU: 22447000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-70-teeth-tooth-width-10mm-outside-diameter-95mm-sku-22447000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 60 teeth tooth width 10mm outside diameter 85mm SKU: 22446000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-60-teeth-tooth-width-10mm-outside-diameter-85mm-sku-22446000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 50 teeth tooth width 10mm outside diameter 75mm SKU: 22445000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-50-teeth-tooth-width-10mm-outside-diameter-75mm-sku-22445000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 48 teeth tooth width 10mm outside diameter 75mm SKU: 22444800](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-48-teeth-tooth-width-10mm-outside-diameter-75mm-sku-22444800/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 45 teeth tooth width 10mm outside diameter 70mm SKU: 22444500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-45-teeth-tooth-width-10mm-outside-diameter-70mm-sku-22444500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 40 teeth tooth width 10mm outside diameter 65mm SKU: 22444000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-40-teeth-tooth-width-10mm-outside-diameter-65mm-sku-22444000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 36 teeth tooth width 10mm outside diameter 60mm SKU: 22443600](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-36-teeth-tooth-width-10mm-outside-diameter-60mm-sku-22443600/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 30 teeth tooth width 10mm outside diameter 55mm SKU: 22443000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-30-teeth-tooth-width-10mm-outside-diameter-55mm-sku-22443000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 25 teeth tooth width 10mm outside diameter 50mm SKU: 22442500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-25-teeth-tooth-width-10mm-outside-diameter-50mm-sku-22442500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 120 teeth tooth width 10mm outside diameter 150mm SKU: 22441200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-120-teeth-tooth-width-10mm-outside-diameter-150mm-sku-22441200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 1 100 teeth tooth width 10mm outside diameter 125mm SKU: 22441000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-1-100-teeth-tooth-width-10mm-outside-diameter-125mm-sku-22441000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 1.0 tooth width 15mm height 15mm nominal length 2000mm SKU: 22411619](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-0-tooth-width-15mm-height-15mm-nominal-length-2000mm-sku-22411619/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.0 tooth width 15mm height 15mm nominal length 1000mm SKU: 22411612](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-0-tooth-width-15mm-height-15mm-nominal-length-1000mm-sku-22411612/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.0 tooth width 10mm height 10mm nominal length 2000mm SKU: 22411609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-0-tooth-width-10mm-height-10mm-nominal-length-2000mm-sku-22411609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 1.0 tooth width 10mm height 10mm nominal length 1000mm SKU: 22411608](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-1-0-tooth-width-10mm-height-10mm-nominal-length-1000mm-sku-22411608/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel module 1.0 tooth width 7mm height 5mm length 250mm SKU: 22360100](https://maedler.in/product/gear-rack-made-of-steel-module-1-0-tooth-width-7mm-height-5mm-length-250mm-sku-22360100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel module 0.7 tooth width 5mm height 7mm length 250mm SKU: 22260100](https://maedler.in/product/gear-rack-made-of-steel-module-0-7-tooth-width-5mm-height-7mm-length-250mm-sku-22260100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel module 0.5 tooth width 4mm height 6mm length 250mm SKU: 22160100](https://maedler.in/product/gear-rack-made-of-steel-module-0-5-tooth-width-4mm-height-6mm-length-250mm-sku-22160100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Spur gear made of steel 11SMnPb30 with hub module 1 50 teeth tooth width 10mm helical tooth 20° left handed outside diameter 55.2mm SKU: 21435000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-50-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-55-2mm-sku-21435000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 40 teeth tooth width 10mm helical tooth 20° left handed outside diameter 44.6mm SKU: 21434000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-40-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-44-6mm-sku-21434000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 36 teeth tooth width 10mm helical tooth 20° left handed outside diameter 40.3mm SKU: 21433600](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-36-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-40-3mm-sku-21433600/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Spur gear made of steel 11SMnPb30 with hub module 1 30 teeth tooth width 10mm helical tooth 20° left handed outside diameter 33.9mm SKU: 21433000](https://maedler.in/product/spur-gear-made-of-steel-11smnpb30-with-hub-module-1-30-teeth-tooth-width-10mm-helical-tooth-20-left-handed-outside-diameter-33-9mm-sku-21433000/): Material: 11SMnPb30+SH (1.0718). Milled teeth. 20° helical tooth system, right and left hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. Photo: right hand. rechts = right handed, links = left handed - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 2000mm SKU: 24360900](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-2000mm-sku-24360900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 1500mm SKU: 24360700](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-1500mm-sku-24360700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 1000mm SKU: 24360500](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-1000mm-sku-24360500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 500mm SKU: 24360300](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-500mm-sku-24360300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 25mm height 30mm length 1000mm SKU: 24360100](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-25mm-height-30mm-length-1000mm-sku-24360100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 3 tooth width 25mm height 30mm length approx. 120mm SKU: 24360000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-3-tooth-width-25mm-height-30mm-length-approx-120mm-sku-24360000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Internal gear made of steel C45 module 3 80 teeth tooth width 30mm outside diameter 310mm SKU: 24348000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-80-teeth-tooth-width-30mm-outside-diameter-310mm-sku-24348000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 3 60 teeth tooth width 30mm outside diameter 250mm SKU: 24346000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-60-teeth-tooth-width-30mm-outside-diameter-250mm-sku-24346000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 3 50 teeth tooth width 30mm outside diameter 220mm SKU: 24345000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-50-teeth-tooth-width-30mm-outside-diameter-220mm-sku-24345000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 3 30 teeth tooth width 30mm outside diameter 160mm SKU: 24343000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-30-teeth-tooth-width-30mm-outside-diameter-160mm-sku-24343000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 3 100 teeth tooth width 30mm outside diameter 370mm SKU: 24341000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-3-100-teeth-tooth-width-30mm-outside-diameter-370mm-sku-24341000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 3 tooth width 30mm height 30mm nominal length 2000mm SKU: 24311609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-3-tooth-width-30mm-height-30mm-nominal-length-2000mm-sku-24311609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 3 tooth width 30mm height 30mm nominal length 1000mm SKU: 24311605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-3-tooth-width-30mm-height-30mm-nominal-length-1000mm-sku-24311605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of 1.4305 module 2 SKU: 24299634](https://maedler.in/product/round-gear-rack-made-of-1-4305-module-2-sku-24299634/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 2.5 diameter 25mm h9 length 1000mm SKU: 24299632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-2-5-diameter-25mm-h9-length-1000mm-sku-24299632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 2.5 diameter 25mm h9 length 500mm SKU: 24299631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-2-5-diameter-25mm-h9-length-500mm-sku-24299631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 2000mm SKU: 24299609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-2000mm-sku-24299609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 1500mm SKU: 24299607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-1500mm-sku-24299607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 1000mm SKU: 24299605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-1000mm-sku-24299605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 500mm SKU: 24299603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-500mm-sku-24299603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length 250mm SKU: 24299602](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-250mm-sku-24299602/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 2.5 tooth width 25mm height 25mm length approx. 100mm SKU: 24299600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-2-5-tooth-width-25mm-height-25mm-length-approx-100mm-sku-24299600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 2,5 tooth width 25mm height 25mm length 2000mm teeth induction hardened SKU: 24288609](https://maedler.in/product/gear-rack-steel-c45k-module-25-tooth-width-25mm-height-25mm-length-2000mm-teeth-induction-hardened-sku-24288609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2,5 tooth width 25mm height 25mm length 1000mm teeth induction hardened SKU: 24288605](https://maedler.in/product/gear-rack-steel-c45k-module-25-tooth-width-25mm-height-25mm-length-1000mm-teeth-induction-hardened-sku-24288605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 2,5 diameter = 25 mm h6 length = 2000 mm SKU: 24266634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-25-diameter-25-mm-h6-length-2000-mm-sku-24266634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 2,5 diameter = 25 mm h6 length = 1000 mm SKU: 24266632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-25-diameter-25-mm-h6-length-1000-mm-sku-24266632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 2,5 diameter = 25 mm h6 length = 500 mm SKU: 24266631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-25-diameter-25-mm-h6-length-500-mm-sku-24266631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel C45 module 2.5 diameter 25mm h6 length 2000mm SKU: 24263400](https://maedler.in/product/round-gear-rack-made-of-steel-c45-module-2-5-diameter-25mm-h6-length-2000mm-sku-24263400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 2.5 diameter 25mm h6 length 1000mm SKU: 24263200](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-5-diameter-25mm-h6-length-1000mm-sku-24263200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 2.5 diameter 25mm h6 length 500mm SKU: 24263100](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-5-diameter-25mm-h6-length-500mm-sku-24263100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 2,5 diameter = 25 mm h6 length = 250mm SKU: 24263000](https://maedler.in/product/round-gear-rack-made-of-steel-module-25-diameter-25-mm-h6-length-250mm-sku-24263000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 2.5 tooth width 25mm height 25mm length 2000mm SKU: 24260900](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-25mm-height-25mm-length-2000mm-sku-24260900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.5 tooth width 25mm height 25mm length 1500mm SKU: 24260700](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-25mm-height-25mm-length-1500mm-sku-24260700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.5 tooth width 25mm height 25mm length 1000mm SKU: 24260500](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-25mm-height-25mm-length-1000mm-sku-24260500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.5 tooth width 25mm height 25mm length 500mm SKU: 24260300](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-25mm-height-25mm-length-500mm-sku-24260300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.5 tooth width 20mm height 25mm length 1000mm SKU: 24260100](https://maedler.in/product/gear-rack-steel-c45k-module-2-5-tooth-width-20mm-height-25mm-length-1000mm-sku-24260100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 2.5 tooth width 20mm height 25mm length approx. 100mm SKU: 24260000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-2-5-tooth-width-20mm-height-25mm-length-approx-100mm-sku-24260000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Internal gear made of steel C45 module 2.5 80 teeth tooth width 25mm outside diameter 260mm SKU: 24248000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-80-teeth-tooth-width-25mm-outside-diameter-260mm-sku-24248000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 60 teeth tooth width 25mm outside diameter 210mm SKU: 24246000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-60-teeth-tooth-width-25mm-outside-diameter-210mm-sku-24246000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 50 teeth tooth width 25mm outside diameter 180mm SKU: 24245000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-50-teeth-tooth-width-25mm-outside-diameter-180mm-sku-24245000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 30 teeth tooth width 25mm outside diameter 135mm SKU: 24243000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-30-teeth-tooth-width-25mm-outside-diameter-135mm-sku-24243000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 120 teeth tooth width 25mm outside diameter 360mm SKU: 24241200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-120-teeth-tooth-width-25mm-outside-diameter-360mm-sku-24241200/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2.5 100 teeth tooth width 25mm outside diameter 310mm SKU: 24241000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-5-100-teeth-tooth-width-25mm-outside-diameter-310mm-sku-24241000/): Material: Steel C45.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 2.5 tooth width 25mm height 25mm nominal length 2000mm SKU: 24211609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-2-5-tooth-width-25mm-height-25mm-nominal-length-2000mm-sku-24211609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 2.5 tooth width 25mm height 25mm nominal length 1000mm SKU: 24211605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-2-5-tooth-width-25mm-height-25mm-nominal-length-1000mm-sku-24211605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of 1.4305 module 2 diameter 20mm h9 length 2000mm SKU: 24199634](https://maedler.in/product/round-gear-rack-made-of-1-4305-module-2-diameter-20mm-h9-length-2000mm-sku-24199634/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 2 diameter 20mm h9 length 1000mm SKU: 24199632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-2-diameter-20mm-h9-length-1000mm-sku-24199632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 2 diameter 20mm h9 length 500mm SKU: 24199631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-2-diameter-20mm-h9-length-500mm-sku-24199631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 2000mm SKU: 24199609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-2000mm-sku-24199609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 1500mm SKU: 24199607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-1500mm-sku-24199607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 1000mm SKU: 24199605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-1000mm-sku-24199605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 500mm SKU: 24199603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-500mm-sku-24199603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 2 tooth width 20mm height 20mm length 250mm SKU: 24199602](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-250mm-sku-24199602/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 2 tooth width 20mm height 20mm length approx. 80mm SKU: 24199600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-2-tooth-width-20mm-height-20mm-length-approx-80mm-sku-24199600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 2 tooth width 20mm height 20mm length 2000mm teeth induction hardened SKU: 24188609](https://maedler.in/product/gear-rack-steel-c45k-module-2-tooth-width-20mm-height-20mm-length-2000mm-teeth-induction-hardened-sku-24188609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2 tooth width 20mm height 20mm length 1000mm teeth induction hardened SKU: 24188605](https://maedler.in/product/gear-rack-steel-c45k-module-2-tooth-width-20mm-height-20mm-length-1000mm-teeth-induction-hardened-sku-24188605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Precision gear rack module 2.0 20 x 20 x1000mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 24168500](https://maedler.in/product/precision-gear-rack-module-2-0-20-x-20-x1000mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-24168500/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Precision gear rack module 2.0 20 x 20 x 500mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 24168300](https://maedler.in/product/precision-gear-rack-module-2-0-20-x-20-x-500mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-24168300/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Precision mounting aid for gear racks steel 16MnCr5 module 2 tooth width 20mm height 20mm length approx. 80mm teeth hardened ground SKU: 24168000](https://maedler.in/product/precision-mounting-aid-for-gear-racks-steel-16mncr5-module-2-tooth-width-20mm-height-20mm-length-approx-80mm-teeth-hardened-ground-sku-24168000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of high strength steel module = 2 diameter = 20 mm h6 length = 2000 mm SKU: 24166634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-2-diameter-20-mm-h6-length-2000-mm-sku-24166634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 2 diameter = 20 mm h6 length = 1000 mm SKU: 24166632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-2-diameter-20-mm-h6-length-1000-mm-sku-24166632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 2 diameter = 20 mm h6 length = 500 mm SKU: 24166631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-2-diameter-20-mm-h6-length-500-mm-sku-24166631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel C45 module 2 diameter 20mm h6 length 2000mm SKU: 24163400](https://maedler.in/product/round-gear-rack-made-of-steel-c45-module-2-diameter-20mm-h6-length-2000mm-sku-24163400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 2 diameter 20mm h6 length 1000mm SKU: 24163200](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-diameter-20mm-h6-length-1000mm-sku-24163200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 2 diameter 20mm h6 length 500mm SKU: 24163100](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-diameter-20mm-h6-length-500mm-sku-24163100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 2, diameter = 20 mm h6 length = 250 mm SKU: 24163000](https://maedler.in/product/round-gear-rack-made-of-steel-module-2-diameter-20-mm-h6-length-250-mm-sku-24163000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 2.0 tooth width 20mm height 20mm length 2000mm SKU: 24160900](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-20mm-height-20mm-length-2000mm-sku-24160900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.0 tooth width 20mm height 20mm length 1500mm SKU: 24160700](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-20mm-height-20mm-length-1500mm-sku-24160700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.0 tooth width 20mm height 20mm length 1000mm SKU: 24160500](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-20mm-height-20mm-length-1000mm-sku-24160500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.0 tooth width 20mm height 20mm length 500mm SKU: 24160300](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-20mm-height-20mm-length-500mm-sku-24160300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 2.0 tooth width 16mm height 20mm length 1000mm SKU: 24160100](https://maedler.in/product/gear-rack-steel-c45k-module-2-0-tooth-width-16mm-height-20mm-length-1000mm-sku-24160100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 2 tooth width 16mm height 20mm length approx. 80mm SKU: 24160000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-2-tooth-width-16mm-height-20mm-length-approx-80mm-sku-24160000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Internal gear made of steel C45 module 2 90 teeth tooth width 16mm outside diameter 220mm SKU: 24149000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-90-teeth-tooth-width-16mm-outside-diameter-220mm-sku-24149000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 80 teeth tooth width 16mm outside diameter 195mm SKU: 24148000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-80-teeth-tooth-width-16mm-outside-diameter-195mm-sku-24148000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 72 teeth tooth width 16mm outside diameter 185mm SKU: 24147200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-72-teeth-tooth-width-16mm-outside-diameter-185mm-sku-24147200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 70 teeth tooth width 16mm outside diameter 175mm SKU: 24147000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-70-teeth-tooth-width-16mm-outside-diameter-175mm-sku-24147000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 65 teeth tooth width 16mm outside diameter 165mm SKU: 24146500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-65-teeth-tooth-width-16mm-outside-diameter-165mm-sku-24146500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 60 teeth tooth width 16mm outside diameter 155mm SKU: 24146000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-60-teeth-tooth-width-16mm-outside-diameter-155mm-sku-24146000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 55 teeth tooth width 16mm outside diameter 145mm SKU: 24145500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-55-teeth-tooth-width-16mm-outside-diameter-145mm-sku-24145500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 50 teeth tooth width 16mm outside diameter 135mm SKU: 24145000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-50-teeth-tooth-width-16mm-outside-diameter-135mm-sku-24145000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 48 teeth tooth width 16mm outside diameter 131mm SKU: 24144800](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-48-teeth-tooth-width-16mm-outside-diameter-131mm-sku-24144800/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 45 teeth tooth width 16mm outside diameter 125mm SKU: 24144500](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-45-teeth-tooth-width-16mm-outside-diameter-125mm-sku-24144500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 40 teeth tooth width 16mm outside diameter 115mm SKU: 24144000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-40-teeth-tooth-width-16mm-outside-diameter-115mm-sku-24144000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 36 teeth tooth width 16mm outside diameter 107mm SKU: 24143600](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-36-teeth-tooth-width-16mm-outside-diameter-107mm-sku-24143600/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 30 teeth tooth width 16mm outside diameter 95mm SKU: 24143000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-30-teeth-tooth-width-16mm-outside-diameter-95mm-sku-24143000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 120 teeth tooth width 16mm outside diameter 280mm SKU: 24141200](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-120-teeth-tooth-width-16mm-outside-diameter-280mm-sku-24141200/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of steel C45 module 2 100 teeth tooth width 16mm outside diameter 240mm SKU: 24141000](https://maedler.in/product/internal-gear-made-of-steel-c45-module-2-100-teeth-tooth-width-16mm-outside-diameter-240mm-sku-24141000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of steel C45 black oxide finished module 2 tooth width 20mm height 20mm nominal length 2000mm SKU: 24111609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-2-tooth-width-20mm-height-20mm-nominal-length-2000mm-sku-24111609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 2 tooth width 20mm height 20mm nominal length 1000mm SKU: 24111605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-2-tooth-width-20mm-height-20mm-nominal-length-1000mm-sku-24111605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of steel, module = 1,5 diameter = 17 mm h6 length = 1000 mm SKU: 22963200](https://maedler.in/product/round-gear-rack-made-of-steel-module-15-diameter-17-mm-h6-length-1000-mm-sku-22963200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1,5 diameter = 17 mm h6 length = 500 mm SKU: 22963100](https://maedler.in/product/round-gear-rack-made-of-steel-module-15-diameter-17-mm-h6-length-500-mm-sku-22963100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 1,5 diameter = 17 mm h6 length = 250 mm SKU: 22963000](https://maedler.in/product/round-gear-rack-made-of-steel-module-15-diameter-17-mm-h6-length-250-mm-sku-22963000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of stainless steel 1.4305 module 1.5 diameter 15mm h9 length 1000mm SKU: 22899632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-1-5-diameter-15mm-h9-length-1000mm-sku-22899632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 1.5 diameter 15mm h9 length 500mm SKU: 22899631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-1-5-diameter-15mm-h9-length-500mm-sku-22899631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length 1500mm SKU: 22899607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-1500mm-sku-22899607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length 1000mm SKU: 22899605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-1000mm-sku-22899605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length 500mm SKU: 22899603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-500mm-sku-22899603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length 250mm SKU: 22899602](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-250mm-sku-22899602/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length approx. 60mm SKU: 22899600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-1-5-tooth-width-15mm-height-15mm-length-approx-60mm-sku-22899600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Precision gear rack module 1.5 15x15x1000mm material 16MnCr5 teeth induction hardened ground all-sided SKU: 22868500](https://maedler.in/product/precision-gear-rack-module-1-5-15x15x1000mm-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-22868500/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Sprocket KRS with hub pitch 8mm 60 teeth material steel SKU: 10086000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-60-teeth-material-steel-sku-10086000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 57 teeth material steel SKU: 10085700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-57-teeth-material-steel-sku-10085700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 50 teeth material steel SKU: 10085000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-50-teeth-material-steel-sku-10085000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 48 teeth material steel SKU: 10084800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-48-teeth-material-steel-sku-10084800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 45 teeth material steel SKU: 10084500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-45-teeth-material-steel-sku-10084500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 40 teeth material steel SKU: 10084000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-40-teeth-material-steel-sku-10084000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 39 teeth material steel SKU: 10083900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-39-teeth-material-steel-sku-10083900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 38 teeth material steel SKU: 10083800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-38-teeth-material-steel-sku-10083800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 37 teeth material steel SKU: 10083700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-37-teeth-material-steel-sku-10083700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 36 teeth material steel SKU: 10083600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-36-teeth-material-steel-sku-10083600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 35 teeth material steel SKU: 10083500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-35-teeth-material-steel-sku-10083500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 34 teeth material steel SKU: 10083400](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-34-teeth-material-steel-sku-10083400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 33 teeth material steel SKU: 10083300](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-33-teeth-material-steel-sku-10083300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 32 teeth material steel SKU: 10083200](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-32-teeth-material-steel-sku-10083200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 31 teeth material steel SKU: 10083100](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-31-teeth-material-steel-sku-10083100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 30 teeth material steel SKU: 10083000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-30-teeth-material-steel-sku-10083000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 29 teeth material steel SKU: 10082900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-29-teeth-material-steel-sku-10082900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 28 teeth material steel SKU: 10082800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-28-teeth-material-steel-sku-10082800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 27 teeth material steel SKU: 10082700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-27-teeth-material-steel-sku-10082700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 26 teeth material steel SKU: 10082600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-26-teeth-material-steel-sku-10082600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 25 teeth material steel SKU: 10082500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-25-teeth-material-steel-sku-10082500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 24 teeth material steel SKU: 10082400](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-24-teeth-material-steel-sku-10082400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 23 teeth material steel SKU: 10082300](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-23-teeth-material-steel-sku-10082300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 22 teeth material steel SKU: 10082200](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-22-teeth-material-steel-sku-10082200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 21 teeth material steel SKU: 10082100](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-21-teeth-material-steel-sku-10082100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 20 teeth material steel SKU: 10082000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-20-teeth-material-steel-sku-10082000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 19 teeth material steel SKU: 10081900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-19-teeth-material-steel-sku-10081900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 18 teeth material steel SKU: 10081800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-18-teeth-material-steel-sku-10081800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 17 teeth material steel SKU: 10081700](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-17-teeth-material-steel-sku-10081700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 16 teeth material steel SKU: 10081600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-16-teeth-material-steel-sku-10081600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 15 teeth material steel SKU: 10081500](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-15-teeth-material-steel-sku-10081500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 14 teeth material steel SKU: 10081400](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-14-teeth-material-steel-sku-10081400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 13 teeth material steel SKU: 10081300](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-13-teeth-material-steel-sku-10081300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 12 teeth material steel SKU: 10081200](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-12-teeth-material-steel-sku-10081200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 11 teeth material steel SKU: 10081100](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-11-teeth-material-steel-sku-10081100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 10 teeth material steel SKU: 10081000](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-10-teeth-material-steel-sku-10081000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 9 teeth material steel SKU: 10080900](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-9-teeth-material-steel-sku-10080900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 8 teeth material steel SKU: 10080800](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-8-teeth-material-steel-sku-10080800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 114 teeth material steel SKU: 10078800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-114-teeth-material-steel-sku-10078800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 95 teeth material steel SKU: 10078300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-95-teeth-material-steel-sku-10078300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 80 teeth material steel SKU: 10078000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-80-teeth-material-steel-sku-10078000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 76 teeth material steel SKU: 10077600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-76-teeth-material-steel-sku-10077600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 70 teeth material steel SKU: 10077000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-70-teeth-material-steel-sku-10077000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 60 teeth material steel SKU: 10076000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-60-teeth-material-steel-sku-10076000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 57 teeth material steel SKU: 10075700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-57-teeth-material-steel-sku-10075700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 54 teeth material steel SKU: 10075400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-54-teeth-material-steel-sku-10075400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 50 teeth material steel SKU: 10075000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-50-teeth-material-steel-sku-10075000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 48 teeth material steel SKU: 10074800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-48-teeth-material-steel-sku-10074800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 45 teeth material steel SKU: 10074500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-45-teeth-material-steel-sku-10074500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 42 teeth material steel SKU: 10074200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-42-teeth-material-steel-sku-10074200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 40 teeth material steel SKU: 10074000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-40-teeth-material-steel-sku-10074000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 38 teeth material steel SKU: 10073800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-38-teeth-material-steel-sku-10073800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 36 teeth material steel SKU: 10073600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-36-teeth-material-steel-sku-10073600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 35 teeth material steel SKU: 10073500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-35-teeth-material-steel-sku-10073500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 32 teeth material steel SKU: 10073200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-32-teeth-material-steel-sku-10073200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 30 teeth material steel SKU: 10073000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-30-teeth-material-steel-sku-10073000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 28 teeth material steel SKU: 10072800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-28-teeth-material-steel-sku-10072800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 27 teeth material steel SKU: 10072700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-27-teeth-material-steel-sku-10072700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 26 teeth material steel SKU: 10072600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-26-teeth-material-steel-sku-10072600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 25 teeth material steel SKU: 10072500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-25-teeth-material-steel-sku-10072500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 24 teeth material steel SKU: 10072400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-24-teeth-material-steel-sku-10072400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 23 teeth material steel SKU: 10072300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-23-teeth-material-steel-sku-10072300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 22 teeth material steel SKU: 10072200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-22-teeth-material-steel-sku-10072200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 21 teeth material steel SKU: 10072100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-21-teeth-material-steel-sku-10072100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 20 teeth material steel SKU: 10072000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-20-teeth-material-steel-sku-10072000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 19 teeth material steel SKU: 10071900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-19-teeth-material-steel-sku-10071900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 18 teeth material steel SKU: 10071800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-18-teeth-material-steel-sku-10071800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 17 teeth material steel SKU: 10071700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-17-teeth-material-steel-sku-10071700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 16 teeth material steel SKU: 10071600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-16-teeth-material-steel-sku-10071600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 15 teeth material steel SKU: 10071500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-15-teeth-material-steel-sku-10071500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 14 teeth material steel SKU: 10071400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-14-teeth-material-steel-sku-10071400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 13 teeth material steel SKU: 10071300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-13-teeth-material-steel-sku-10071300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 12 teeth material steel SKU: 10071200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-12-teeth-material-steel-sku-10071200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 11 teeth material steel SKU: 10071100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-11-teeth-material-steel-sku-10071100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 10 teeth material steel SKU: 10071000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-10-teeth-material-steel-sku-10071000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 9 teeth material steel SKU: 10070900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-9-teeth-material-steel-sku-10070900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 6mm 8 teeth material steel SKU: 10070800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-6mm-8-teeth-material-steel-sku-10070800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 54 reinforced (H =4 mm, see drawing). General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 76 teeth material steel SKU: 10067600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-76-teeth-material-steel-sku-10067600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 57 teeth material steel SKU: 10065700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-57-teeth-material-steel-sku-10065700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 48 teeth material steel SKU: 10064800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-48-teeth-material-steel-sku-10064800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 45 teeth material steel SKU: 10064500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-45-teeth-material-steel-sku-10064500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 40 teeth material steel SKU: 10064000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-40-teeth-material-steel-sku-10064000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 39 teeth material steel SKU: 10063900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-39-teeth-material-steel-sku-10063900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 38 teeth material steel SKU: 10063800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-38-teeth-material-steel-sku-10063800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 37 teeth material steel SKU: 10063700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-37-teeth-material-steel-sku-10063700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 36 teeth material steel SKU: 10063600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-36-teeth-material-steel-sku-10063600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 35 teeth material steel SKU: 10063500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-35-teeth-material-steel-sku-10063500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 34 teeth material steel SKU: 10063400](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-34-teeth-material-steel-sku-10063400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 33 teeth material steel SKU: 10063300](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-33-teeth-material-steel-sku-10063300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 32 teeth material steel SKU: 10063200](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-32-teeth-material-steel-sku-10063200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 31 teeth material steel SKU: 10063100](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-31-teeth-material-steel-sku-10063100/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 30 teeth material steel SKU: 10063000](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-30-teeth-material-steel-sku-10063000/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 29 teeth material steel SKU: 10062900](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-29-teeth-material-steel-sku-10062900/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 28 teeth material steel SKU: 10062800](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-28-teeth-material-steel-sku-10062800/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 27 teeth material steel SKU: 10062700](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-27-teeth-material-steel-sku-10062700/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 26 teeth material steel SKU: 10062600](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-26-teeth-material-steel-sku-10062600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 25 teeth material steel SKU: 10062500](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-25-teeth-material-steel-sku-10062500/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 24 teeth material steel SKU: 10062400](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-24-teeth-material-steel-sku-10062400/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 23 teeth material steel SKU: 10062300](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-23-teeth-material-steel-sku-10062300/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 6mm 22 teeth material steel SKU: 10062200](https://maedler.in/product/sprocket-krs-with-hub-pitch-6mm-22-teeth-material-steel-sku-10062200/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1= 2,6 mm, c= 0,7 mm, r3= 6 mm. Other dimensions: See the table. - [Feather key DIN 6885-1 version A 12 x 8 x 60 mm material C45 SKU: 61820200](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-60-mm-material-c45-sku-61820200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 12 x 8 x 55 mm material C45 SKU: 61820100](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-55-mm-material-c45-sku-61820100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 12 x 8 x 50 mm material C45 SKU: 61820000](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-50-mm-material-c45-sku-61820000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 12 x 8 x 45 mm material C45 SKU: 61819900](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-45-mm-material-c45-sku-61819900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 12 x 8 x 40 mm material C45 SKU: 61819800](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-40-mm-material-c45-sku-61819800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 12 x 8 x 35 mm material C45 SKU: 61819700](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-35-mm-material-c45-sku-61819700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 60 mm material C45 SKU: 61817900](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-60-mm-material-c45-sku-61817900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 55 mm material C45 SKU: 61817800](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-55-mm-material-c45-sku-61817800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 50 mm material C45 SKU: 61817700](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-50-mm-material-c45-sku-61817700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 45 mm material C45 SKU: 61817600](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-45-mm-material-c45-sku-61817600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 40 mm material C45 SKU: 61817500](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-40-mm-material-c45-sku-61817500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 35 mm material C45 SKU: 61817400](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-35-mm-material-c45-sku-61817400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 30 mm material C45 SKU: 61817300](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-30-mm-material-c45-sku-61817300/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 28 mm material C45 SKU: 61817200](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-28-mm-material-c45-sku-61817200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 25 mm material C45 SKU: 61817100](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-25-mm-material-c45-sku-61817100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 60 mm material C45 SKU: 61815600](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-60-mm-material-c45-sku-61815600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 55 mm material C45 SKU: 61815500](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-55-mm-material-c45-sku-61815500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 50 mm material C45 SKU: 61815400](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-50-mm-material-c45-sku-61815400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 45 mm material C45 SKU: 61815300](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-45-mm-material-c45-sku-61815300/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 40 mm material C45 SKU: 61815200](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-40-mm-material-c45-sku-61815200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 35 mm material C45 SKU: 61815100](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-35-mm-material-c45-sku-61815100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 30 mm material C45 SKU: 61815000](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-30-mm-material-c45-sku-61815000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 28 mm material C45 SKU: 61814900](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-28-mm-material-c45-sku-61814900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 25 mm material C45 SKU: 61814800](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-25-mm-material-c45-sku-61814800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 22 mm material C45 SKU: 61814700](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-22-mm-material-c45-sku-61814700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 20 mm material C45 SKU: 61814600](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-20-mm-material-c45-sku-61814600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 60 mm material C45 SKU: 61813200](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-60-mm-material-c45-sku-61813200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 55 mm material C45 SKU: 61813100](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-55-mm-material-c45-sku-61813100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 50 mm material C45 SKU: 61813000](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-50-mm-material-c45-sku-61813000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 45 mm material C45 SKU: 61812900](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-45-mm-material-c45-sku-61812900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 40 mm material C45 SKU: 61812800](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-40-mm-material-c45-sku-61812800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 35 mm material C45 SKU: 61812700](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-35-mm-material-c45-sku-61812700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 30 mm material C45 SKU: 61812600](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-30-mm-material-c45-sku-61812600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 28 mm material C45 SKU: 61812500](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-28-mm-material-c45-sku-61812500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 25 mm material C45 SKU: 61812400](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-25-mm-material-c45-sku-61812400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 22 mm material C45 SKU: 61812300](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-22-mm-material-c45-sku-61812300/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 20 mm material C45 SKU: 61812200](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-20-mm-material-c45-sku-61812200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 18 mm material C45 SKU: 61812100](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-18-mm-material-c45-sku-61812100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 16 mm material C45 SKU: 61812000](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-16-mm-material-c45-sku-61812000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 15 mm material C45 SKU: 61811900](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-15-mm-material-c45-sku-61811900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 14 mm material C45 SKU: 61811800](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-14-mm-material-c45-sku-61811800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 50 mm material C45 SKU: 61810700](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-50-mm-material-c45-sku-61810700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 45 mm material C45 SKU: 61810600](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-45-mm-material-c45-sku-61810600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 40 mm material C45 SKU: 61810500](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-40-mm-material-c45-sku-61810500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 35 mm material C45 SKU: 61810400](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-35-mm-material-c45-sku-61810400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 30 mm material C45 SKU: 61810300](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-30-mm-material-c45-sku-61810300/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 28 mm material C45 SKU: 61810200](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-28-mm-material-c45-sku-61810200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 25 mm material C45 SKU: 61810100](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-25-mm-material-c45-sku-61810100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 22 mm material C45 SKU: 61810000](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-22-mm-material-c45-sku-61810000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 20 mm material C45 SKU: 61809900](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-20-mm-material-c45-sku-61809900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 18 mm material C45 SKU: 61809800](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-18-mm-material-c45-sku-61809800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 16 mm material C45 SKU: 61809700](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-16-mm-material-c45-sku-61809700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 15 mm material C45 SKU: 61809600](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-15-mm-material-c45-sku-61809600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 14 mm material C45 SKU: 61809500](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-14-mm-material-c45-sku-61809500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 12 mm material C45 SKU: 61809400](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-12-mm-material-c45-sku-61809400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 30 mm material C45 SKU: 61807300](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-30-mm-material-c45-sku-61807300/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 28 mm material C45 SKU: 61807200](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-28-mm-material-c45-sku-61807200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 25 mm material C45 SKU: 61807100](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-25-mm-material-c45-sku-61807100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 22 mm material C45 SKU: 61807000](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-22-mm-material-c45-sku-61807000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 20 mm material C45 SKU: 61806900](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-20-mm-material-c45-sku-61806900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 18 mm material C45 SKU: 61806800](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-18-mm-material-c45-sku-61806800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 16 mm material C45 SKU: 61806700](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-16-mm-material-c45-sku-61806700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 15 mm material C45 SKU: 61806600](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-15-mm-material-c45-sku-61806600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 14 mm material C45 SKU: 61806500](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-14-mm-material-c45-sku-61806500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 12 mm material C45 SKU: 61806400](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-12-mm-material-c45-sku-61806400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 10 mm material C45 SKU: 61806300](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-10-mm-material-c45-sku-61806300/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 30 mm material C45 SKU: 61804200](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-30-mm-material-c45-sku-61804200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 28 mm material C45 SKU: 61804100](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-28-mm-material-c45-sku-61804100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 25 mm material C45 SKU: 61804000](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-25-mm-material-c45-sku-61804000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 22 mm material C45 SKU: 61803900](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-22-mm-material-c45-sku-61803900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 20 mm material C45 SKU: 61803800](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-20-mm-material-c45-sku-61803800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 18 mm material C45 SKU: 61803700](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-18-mm-material-c45-sku-61803700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 16 mm material C45 SKU: 61803600](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-16-mm-material-c45-sku-61803600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 15 mm material C45 SKU: 61803500](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-15-mm-material-c45-sku-61803500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 14 mm material C45 SKU: 61803400](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-14-mm-material-c45-sku-61803400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 12 mm material C45 SKU: 61803200](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-12-mm-material-c45-sku-61803200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 10 mm material C45 SKU: 61803100](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-10-mm-material-c45-sku-61803100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 8 mm material C45 SKU: 61803000](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-8-mm-material-c45-sku-61803000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 25 mm material C45 SKU: 61801200](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-25-mm-material-c45-sku-61801200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 22 mm material C45 SKU: 61801100](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-22-mm-material-c45-sku-61801100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 20 mm material C45 SKU: 61801000](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-20-mm-material-c45-sku-61801000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 18 mm material C45 SKU: 61800900](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-18-mm-material-c45-sku-61800900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 16 mm material C45 SKU: 61800800](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-16-mm-material-c45-sku-61800800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x2 x 15 mm material C45 SKU: 61800700](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x2-x-15-mm-material-c45-sku-61800700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 14 mm material C45 SKU: 61800600](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-14-mm-material-c45-sku-61800600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 12 mm material C45 SKU: 61800500](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-12-mm-material-c45-sku-61800500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 10 mm material C45 SKU: 61800400](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-10-mm-material-c45-sku-61800400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 8 mm material C45 SKU: 61800300](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-8-mm-material-c45-sku-61800300/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 2 x 2 x 6mm material C45 SKU: 61800200](https://maedler.in/product/feather-key-din-6885-1-version-a-2-x-2-x-6mm-material-c45-sku-61800200/): Material: C45K.Version A. - [Assortment box washers and cotter pins zinc-coated white SKU: 61800003](https://maedler.in/product/assortment-box-washers-and-cotter-pins-zinc-coated-white-sku-61800003/): Material: Steel, zinc-plated, white/blue. The assortment box is made from impact-resitant plastic of premium quality and is filled with washers DIN EN ISO 7089 (formerly DIN 125 A) and split pins according to DIN EN ISO 1234 (formerly DIN 94), matching BEK-bolts with groove/clevises/clevis joints. Contains 1480 pieces. Weight 4.9 kg. Washer Amount Size A 4.3 100 A 5.3 100 A 6.4 100 A 8.4 100 A 10.5 100 A 13.0 100 A 15.0 100 A 17.0 30 A 19.0 25 A 21.0 25 Pin Amount Size 1 x 10 200 1.6 x 16 100 2 x 16 100 3.2 x 20 100 4 x 32 100 - [Assortment box zinc plated SL-circlips (snap rings) SKU: 61800002](https://maedler.in/product/assortment-box-zinc-plated-sl-circlips-snap-rings-sku-61800002/): Material: Steel, zinc plated. The assortment box is made from impact-resitant plastic of premium quality and is filled with SL-Retainers matching BEKbolts with groove/clevises/clevis joints. Contains 560 pieces. Weight 1.23 kg. Size Amount 4 100 5 100 6 100 8 100 10 40 12 40 14 40 16 40 - [Assortment box zinc plated KL-circlips (snap rings) SKU: 61800001](https://maedler.in/product/assortment-box-zinc-plated-kl-circlips-snap-rings-sku-61800001/): Material: Steel, zinc plated. The assortment box is made from impact-resitant plastic of premium quality and is filled with KL-Retainers matching BEKbolts with groove/clevises/clevis joints. Contains 880 pieces. Weight 1.8 kg. Size Amount 3 100 4 100 5 100 6 100 8 100 10 80 12 100 14 80 16 100 24 20 - [Assortment box square keys and clamping rings SKU: 61800000](https://maedler.in/product/assortment-box-square-keys-and-clamping-rings-sku-61800000/): Materials: Parallel keys made from C45K. Slotted shaft collars (clamp collars) made from steel, black oxide finish. The assortment box is made from impact-resitant plastic of premium quality and is filled with parallel keys and clamp collars. Contains 316 pieces. Weight 2.05 kg. Product Size Amount Parallel keys 3 x 3 x 12 40 Parallel keys 3 x 3 x 20 40 Parallel keys 4 x 4 x 15 30 Parallel keys 4 x 4 x 20 30 Parallel keys 5 x 5 x 15 20 Parallel keys 5 x 5 x 20 20 Parallel keys 5 x 5 x 25 20 Parallel keys 5 x 5 x 30 15 Parallel keys 6 x 6 x 25 15 Parallel keys 6 x 6 x 30 15 Parallel keys 6 x 6 x 40 15 Parallel keys 8 x 7 x 25 15 Parallel keys 8 x 7 x 40 10 Parallel keys 10 x 8 x 40 6 Clamp Collars 6 mm Bore 8 Clamp Collars 8 mm Bore 8 Clamp Collars 10 mm Bore 5 Clamp Collars 12 mm Bore 4 - [Retaining ring DIN 472 110mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799710](https://maedler.in/product/retaining-ring-din-472-110mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799710/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 100mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799700](https://maedler.in/product/retaining-ring-din-472-100mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799700/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 90mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799690](https://maedler.in/product/retaining-ring-din-472-90mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799690/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 85mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799685](https://maedler.in/product/retaining-ring-din-472-85mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799685/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 80mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799680](https://maedler.in/product/retaining-ring-din-472-80mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799680/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 75mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799675](https://maedler.in/product/retaining-ring-din-472-75mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799675/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Retaining ring DIN 472 72mm stainless steel 1.4122 Attention: Reduced elasticity and modified mechanical properties compared to spring steel! SKU: 61799672](https://maedler.in/product/retaining-ring-din-472-72mm-stainless-steel-1-4122-attention-reduced-elasticity-and-modified-mechanical-properties-compared-to-spring-steel-sku-61799672/): Material: Stainless steel 1.4122. External rings for axial fixing a rolling bearing or othermachine part inside a bore. Note: The stainless version has, against the DIN version from feather steel, lower spring forces and different mechanical properties. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 14 teeth material steel SKU: 10121400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-14-teeth-material-steel-sku-10121400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 13 teeth material steel SKU: 10121300](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-13-teeth-material-steel-sku-10121300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 12 teeth material steel SKU: 10121200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-12-teeth-material-steel-sku-10121200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 11 teeth material steel SKU: 10121100](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-11-teeth-material-steel-sku-10121100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 10 teeth material steel SKU: 10121000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-10-teeth-material-steel-sku-10121000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 9 teeth material steel SKU: 10120900](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-9-teeth-material-steel-sku-10120900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 8 teeth material steel SKU: 10120800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-8-teeth-material-steel-sku-10120800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 114 teeth material cast iron SKU: 10118800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-114-teeth-material-cast-iron-sku-10118800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 95 teeth material cast iron SKU: 10118300](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-95-teeth-material-cast-iron-sku-10118300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 76 teeth material cast iron SKU: 10117600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-76-teeth-material-cast-iron-sku-10117600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 57 teeth material cast iron SKU: 10115700](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-57-teeth-material-cast-iron-sku-10115700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 45 teeth material cast iron SKU: 10114500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-45-teeth-material-cast-iron-sku-10114500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 40 teeth material steel SKU: 10114000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-40-teeth-material-steel-sku-10114000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 38 teeth material steel SKU: 10113800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-38-teeth-material-steel-sku-10113800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 36 teeth material steel SKU: 10113600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-36-teeth-material-steel-sku-10113600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 35 teeth material steel SKU: 10113500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-35-teeth-material-steel-sku-10113500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 32 teeth material steel SKU: 10113200](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-32-teeth-material-steel-sku-10113200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 30 teeth material steel SKU: 10113000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-30-teeth-material-steel-sku-10113000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 29 teeth material steel SKU: 10112900](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-29-teeth-material-steel-sku-10112900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 28 teeth material steel SKU: 10112800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-28-teeth-material-steel-sku-10112800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 27 teeth material steel SKU: 10112700](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-27-teeth-material-steel-sku-10112700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 26 teeth material steel SKU: 10112600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-26-teeth-material-steel-sku-10112600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 25 teeth material steel SKU: 10112500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-25-teeth-material-steel-sku-10112500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 24 teeth material steel SKU: 10112400](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-24-teeth-material-steel-sku-10112400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 23 teeth material steel SKU: 10112300](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-23-teeth-material-steel-sku-10112300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 22 teeth material steel SKU: 10112200](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-22-teeth-material-steel-sku-10112200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 21 teeth material steel SKU: 10112100](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-21-teeth-material-steel-sku-10112100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 20 teeth material steel SKU: 10112000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-20-teeth-material-steel-sku-10112000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 19 teeth material steel SKU: 10111900](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-19-teeth-material-steel-sku-10111900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 18 teeth material steel SKU: 10111800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-18-teeth-material-steel-sku-10111800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 17 teeth material steel SKU: 10111700](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-17-teeth-material-steel-sku-10111700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 16 teeth material steel SKU: 10111600](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-16-teeth-material-steel-sku-10111600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 15 teeth material steel SKU: 10111500](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-15-teeth-material-steel-sku-10111500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 14 teeth material steel SKU: 10111400](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-14-teeth-material-steel-sku-10111400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 13 teeth material steel SKU: 10111300](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-13-teeth-material-steel-sku-10111300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 12 teeth material steel SKU: 10111200](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-12-teeth-material-steel-sku-10111200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 11 teeth material steel SKU: 10111100](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-11-teeth-material-steel-sku-10111100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 10 teeth material steel SKU: 10111000](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-10-teeth-material-steel-sku-10111000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 9 teeth material steel SKU: 10110900](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-9-teeth-material-steel-sku-10110900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRS with hub 06 B-1 3/8x7/32" 8 teeth material steel SKU: 10110800](https://maedler.in/product/sprocket-krs-with-hub-06-b-1-3-8x7-32-8-teeth-material-steel-sku-10110800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 40 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099840](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-40-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099840/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099830](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099830/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099825](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099825/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099823](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099823/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099821](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099821/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099820](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099820/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099819](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099819/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099817](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099817/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099815](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099815/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 8mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099813](https://maedler.in/product/sprocket-krr-with-hub-pitch-8mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099813/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,8 mm, c = 0,8 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099630](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099630/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099625](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099625/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099623](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099623/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099621](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099621/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099620](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099620/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099619](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099619/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099617](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099617/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099615](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099615/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 6mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10099613](https://maedler.in/product/sprocket-krr-with-hub-pitch-6mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10099613/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 2,6 mm, c = 0,7 mm, r3 = 6 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 114 teeth material steel SKU: 10098800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-114-teeth-material-steel-sku-10098800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 83 teeth material steel SKU: 10098300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-83-teeth-material-steel-sku-10098300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 80 teeth material steel SKU: 10098000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-80-teeth-material-steel-sku-10098000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 76 teeth material steel SKU: 10097600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-76-teeth-material-steel-sku-10097600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 70 teeth material steel SKU: 10097000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-70-teeth-material-steel-sku-10097000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 65 teeth material steel SKU: 10096500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-65-teeth-material-steel-sku-10096500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 60 teeth material steel SKU: 10096000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-60-teeth-material-steel-sku-10096000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 57 teeth material steel SKU: 10095700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-57-teeth-material-steel-sku-10095700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 54 teeth material steel SKU: 10095400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-54-teeth-material-steel-sku-10095400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 50 teeth material steel SKU: 10095000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-50-teeth-material-steel-sku-10095000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 48 teeth material steel SKU: 10094800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-48-teeth-material-steel-sku-10094800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 45 teeth material steel SKU: 10094500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-45-teeth-material-steel-sku-10094500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 42 teeth material steel SKU: 10094200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-42-teeth-material-steel-sku-10094200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 40 teeth material steel SKU: 10094000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-40-teeth-material-steel-sku-10094000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 38 teeth material steel SKU: 10093800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-38-teeth-material-steel-sku-10093800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 36 teeth material steel SKU: 10093600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-36-teeth-material-steel-sku-10093600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 35 teeth material steel SKU: 10093500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-35-teeth-material-steel-sku-10093500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 32 teeth material steel SKU: 10093200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-32-teeth-material-steel-sku-10093200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 30 teeth material steel SKU: 10093000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-30-teeth-material-steel-sku-10093000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 28 teeth material steel SKU: 10092800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-28-teeth-material-steel-sku-10092800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 27 teeth material steel SKU: 10092700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-27-teeth-material-steel-sku-10092700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 26 teeth material steel SKU: 10092600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-26-teeth-material-steel-sku-10092600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 25 teeth material steel SKU: 10092500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-25-teeth-material-steel-sku-10092500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 24 teeth material steel SKU: 10092400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-24-teeth-material-steel-sku-10092400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 23 teeth material steel SKU: 10092300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-23-teeth-material-steel-sku-10092300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 22 teeth material steel SKU: 10092200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-22-teeth-material-steel-sku-10092200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 21 teeth material steel SKU: 10092100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-21-teeth-material-steel-sku-10092100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 20 teeth material steel SKU: 10092000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-20-teeth-material-steel-sku-10092000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 19 teeth material steel SKU: 10091900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-19-teeth-material-steel-sku-10091900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 18 teeth material steel SKU: 10091800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-18-teeth-material-steel-sku-10091800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 17 teeth material steel SKU: 10091700](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-17-teeth-material-steel-sku-10091700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 16 teeth material steel SKU: 10091600](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-16-teeth-material-steel-sku-10091600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 15 teeth material steel SKU: 10091500](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-15-teeth-material-steel-sku-10091500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 14 teeth material steel SKU: 10091400](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-14-teeth-material-steel-sku-10091400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 13 teeth material steel SKU: 10091300](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-13-teeth-material-steel-sku-10091300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 12 teeth material steel SKU: 10091200](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-12-teeth-material-steel-sku-10091200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 11 teeth material steel SKU: 10091100](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-11-teeth-material-steel-sku-10091100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 10 teeth material steel SKU: 10091000](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-10-teeth-material-steel-sku-10091000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 9 teeth material steel SKU: 10090900](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-9-teeth-material-steel-sku-10090900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Plate wheel KRL without hub pitch 8mm 8 teeth material steel SKU: 10090800](https://maedler.in/product/plate-wheel-krl-without-hub-pitch-8mm-8-teeth-material-steel-sku-10090800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 48 reinforced (H = 4 mm, see drawing). General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRS with hub pitch 8mm 76 teeth material steel SKU: 10087600](https://maedler.in/product/sprocket-krs-with-hub-pitch-8mm-76-teeth-material-steel-sku-10087600/): Material: Low-carbon steel, not hardable. 1) Sprockets with 76 teeth are made from steel St52 with welded in hub. Pre-bored. General dimensions: B1 = 2,8 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 30mm SKU: 61840430](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-30mm-sku-61840430/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 28mm SKU: 61840428](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-28mm-sku-61840428/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 26mm SKU: 61840426](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-26mm-sku-61840426/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 24mm SKU: 61840424](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-24mm-sku-61840424/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 22mm SKU: 61840422](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-22mm-sku-61840422/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 20mm SKU: 61840420](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-20mm-sku-61840420/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 18mm SKU: 61840418](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-18mm-sku-61840418/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 16mm SKU: 61840416](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-16mm-sku-61840416/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 14mm SKU: 61840414](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-14mm-sku-61840414/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 12mm SKU: 61840412](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-12mm-sku-61840412/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 10mm SKU: 61840410](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-10mm-sku-61840410/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 8mm SKU: 61840408](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-8mm-sku-61840408/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 32mm SKU: 61840332](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-32mm-sku-61840332/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 30mm SKU: 61840330](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-30mm-sku-61840330/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 28mm SKU: 61840328](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-28mm-sku-61840328/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 26mm SKU: 61840326](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-26mm-sku-61840326/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 24mm SKU: 61840324](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-24mm-sku-61840324/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 22mm SKU: 61840322](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-22mm-sku-61840322/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 20mm SKU: 61840320](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-20mm-sku-61840320/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 18mm SKU: 61840318](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-18mm-sku-61840318/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 16mm SKU: 61840316](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-16mm-sku-61840316/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 14mm SKU: 61840314](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-14mm-sku-61840314/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 12mm SKU: 61840312](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-12mm-sku-61840312/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 10mm SKU: 61840310](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-10mm-sku-61840310/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 3m6 length 8mm SKU: 61840308](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-3m6-length-8mm-sku-61840308/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 20mm SKU: 61840220](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-20mm-sku-61840220/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 18mm SKU: 61840218](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-18mm-sku-61840218/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 16mm SKU: 61840216](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-16mm-sku-61840216/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 14mm SKU: 61840214](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-14mm-sku-61840214/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 12mm SKU: 61840212](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-12mm-sku-61840212/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 10mm SKU: 61840210](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-10mm-sku-61840210/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 8mm SKU: 61840208](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-8mm-sku-61840208/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 6mm SKU: 61840206](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-6mm-sku-61840206/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 5mm SKU: 61840205](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-5mm-sku-61840205/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2m6 length 4mm SKU: 61840204](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2m6-length-4mm-sku-61840204/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1m6 length 10mm SKU: 61840110](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1m6-length-10mm-sku-61840110/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1m6 length 8mm SKU: 61840108](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1m6-length-8mm-sku-61840108/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1m6 length 6mm SKU: 61840106](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1m6-length-6mm-sku-61840106/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1m6 length 5mm SKU: 61840105](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1m6-length-5mm-sku-61840105/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1m6 length 4mm SKU: 61840104](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1m6-length-4mm-sku-61840104/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Woodruff key DIN 6888 material 1.4571 width 8mm x height 13mm SKU: 61837813](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-8mm-x-height-13mm-sku-61837813/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 8mm x height 11mm SKU: 61837811](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-8mm-x-height-11mm-sku-61837811/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 6mm x height 10mm SKU: 61837610](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-6mm-x-height-10mm-sku-61837610/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 6mm x height 9mm SKU: 61837609](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-6mm-x-height-9mm-sku-61837609/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 6mm x height 7,5mm SKU: 61837607](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-6mm-x-height-75mm-sku-61837607/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 5mm x height 7,5mm SKU: 61837507](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-5mm-x-height-75mm-sku-61837507/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 5mm x height 6,5mm SKU: 61837506](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-5mm-x-height-65mm-sku-61837506/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 4mm x height 7,5mm SKU: 61837407](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-4mm-x-height-75mm-sku-61837407/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 4mm x height 6,5mm SKU: 61837406](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-4mm-x-height-65mm-sku-61837406/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 4mm x height 5mm SKU: 61837405](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-4mm-x-height-5mm-sku-61837405/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 3mm x height 3,7mm SKU: 61837303](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-3mm-x-height-37mm-sku-61837303/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 2mm x height 3,7mm SKU: 61837203](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-2mm-x-height-37mm-sku-61837203/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material 1.4571 width 2mm x height 2,6mm SKU: 61837202](https://maedler.in/product/woodruff-key-din-6888-material-1-4571-width-2mm-x-height-26mm-sku-61837202/): Material: Stainless steel 1.4571 (AISI 316 Ti).Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections.Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction.All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 10mm x height 16mm SKU: 61831016](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-10mm-x-height-16mm-sku-61831016/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 10mm x height 13mm SKU: 61831013](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-10mm-x-height-13mm-sku-61831013/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 10mm x height 11mm SKU: 61831011](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-10mm-x-height-11mm-sku-61831011/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 8mm x height 13mm SKU: 61830813](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-8mm-x-height-13mm-sku-61830813/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 8mm x height 11mm SKU: 61830811](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-8mm-x-height-11mm-sku-61830811/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 8mm x height 9mm SKU: 61830809](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-8mm-x-height-9mm-sku-61830809/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 6mm x height 11mm SKU: 61830611](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-6mm-x-height-11mm-sku-61830611/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 6mm x height 10mm SKU: 61830610](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-6mm-x-height-10mm-sku-61830610/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 6mm x height 9mm SKU: 61830609](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-6mm-x-height-9mm-sku-61830609/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 6mm x height 7,5mm SKU: 61830607](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-6mm-x-height-75mm-sku-61830607/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 5mm x height 9mm SKU: 61830509](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-5mm-x-height-9mm-sku-61830509/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 5mm x height 7,5mm SKU: 61830507](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-5mm-x-height-75mm-sku-61830507/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 5mm x height 6,5mm SKU: 61830506](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-5mm-x-height-65mm-sku-61830506/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 4mm x height 7,5mm SKU: 61830407](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-4mm-x-height-75mm-sku-61830407/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 4mm x height 6,5mm SKU: 61830406](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-4mm-x-height-65mm-sku-61830406/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 4mm x height 5mm SKU: 61830405](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-4mm-x-height-5mm-sku-61830405/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 3mm x height 6,5mm SKU: 61830306](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-3mm-x-height-65mm-sku-61830306/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 3mm x height 5mm SKU: 61830305](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-3mm-x-height-5mm-sku-61830305/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 3mm x height 3,7mm SKU: 61830303](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-3mm-x-height-37mm-sku-61830303/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 2mm x height 3,7mm SKU: 61830203](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-2mm-x-height-37mm-sku-61830203/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Woodruff key DIN 6888 material C45+C width 2mm x height 2,6mm SKU: 61830202](https://maedler.in/product/woodruff-key-din-6888-material-c45c-width-2mm-x-height-26mm-sku-61830202/): Material: Steel C45+C, bright.Cost-effective, easy to mount and dismount fastening element for shaft-to-hub connections. Recommended for single direction of rotation. At conical shafts and hub bores, an axial locking is only requiered in one direction. All edges are rounded. - [Feather key DIN 6885-1 version A 18 x 11 x 80 material C45 SKU: 61825200](https://maedler.in/product/feather-key-din-6885-1-version-a-18-x-11-x-80-material-c45-sku-61825200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 18 x 11 x 75 mm material C45 SKU: 61825100](https://maedler.in/product/feather-key-din-6885-1-version-a-18-x-11-x-75-mm-material-c45-sku-61825100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 18 x 11 x 70 mm material C45 SKU: 61825000](https://maedler.in/product/feather-key-din-6885-1-version-a-18-x-11-x-70-mm-material-c45-sku-61825000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 18 x 11 x 65 mm material C45 SKU: 61824900](https://maedler.in/product/feather-key-din-6885-1-version-a-18-x-11-x-65-mm-material-c45-sku-61824900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 18 x 11 x 60 mm material C45 SKU: 61824800](https://maedler.in/product/feather-key-din-6885-1-version-a-18-x-11-x-60-mm-material-c45-sku-61824800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 18 x 11 x 55 mm material C45 SKU: 61824700](https://maedler.in/product/feather-key-din-6885-1-version-a-18-x-11-x-55-mm-material-c45-sku-61824700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 18 x 11x 50 mm material C45 SKU: 61824600](https://maedler.in/product/feather-key-din-6885-1-version-a-18-x-11x-50-mm-material-c45-sku-61824600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 16 x 10 80 mm material C45 SKU: 61823500](https://maedler.in/product/feather-key-din-6885-1-version-a-16-x-10-80-mm-material-c45-sku-61823500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 16 x 10 x 75 mm material C45 SKU: 61823400](https://maedler.in/product/feather-key-din-6885-1-version-a-16-x-10-x-75-mm-material-c45-sku-61823400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 16 x 10 x 70 mm material C45 SKU: 61823300](https://maedler.in/product/feather-key-din-6885-1-version-a-16-x-10-x-70-mm-material-c45-sku-61823300/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 16 x 10 x 65 mm material C45 SKU: 61823200](https://maedler.in/product/feather-key-din-6885-1-version-a-16-x-10-x-65-mm-material-c45-sku-61823200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 16 x 10 x 60 mm material C45 SKU: 61823100](https://maedler.in/product/feather-key-din-6885-1-version-a-16-x-10-x-60-mm-material-c45-sku-61823100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 16 x 10 x 55 mm material C45 SKU: 61823000](https://maedler.in/product/feather-key-din-6885-1-version-a-16-x-10-x-55-mm-material-c45-sku-61823000/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 16 x 10 x 50 mm material C45 SKU: 61822900](https://maedler.in/product/feather-key-din-6885-1-version-a-16-x-10-x-50-mm-material-c45-sku-61822900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 16 x 10 x 45 mm material C45 SKU: 61822800](https://maedler.in/product/feather-key-din-6885-1-version-a-16-x-10-x-45-mm-material-c45-sku-61822800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 14 x 9 x 80 mm material C45 SKU: 61821900](https://maedler.in/product/feather-key-din-6885-1-version-a-14-x-9-x-80-mm-material-c45-sku-61821900/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 14 x 9 x 75 mm material C45 SKU: 61821800](https://maedler.in/product/feather-key-din-6885-1-version-a-14-x-9-x-75-mm-material-c45-sku-61821800/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 14 x 9 x 70 mm material C45 SKU: 61821700](https://maedler.in/product/feather-key-din-6885-1-version-a-14-x-9-x-70-mm-material-c45-sku-61821700/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 14 x 9 x 65 mm material C45 SKU: 61821600](https://maedler.in/product/feather-key-din-6885-1-version-a-14-x-9-x-65-mm-material-c45-sku-61821600/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 14 x 9 x 60 material C45 SKU: 61821500](https://maedler.in/product/feather-key-din-6885-1-version-a-14-x-9-x-60-material-c45-sku-61821500/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 14 x 9 x 55 mm material C45 SKU: 61821400](https://maedler.in/product/feather-key-din-6885-1-version-a-14-x-9-x-55-mm-material-c45-sku-61821400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 14 x 9 x 50 material C45 SKU: 61821300](https://maedler.in/product/feather-key-din-6885-1-version-a-14-x-9-x-50-material-c45-sku-61821300/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 14 x 9 x 45 mm material C45 SKU: 61821200](https://maedler.in/product/feather-key-din-6885-1-version-a-14-x-9-x-45-mm-material-c45-sku-61821200/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 14 x 9 x 40 mm material C45 SKU: 61821100](https://maedler.in/product/feather-key-din-6885-1-version-a-14-x-9-x-40-mm-material-c45-sku-61821100/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 12 x 8 x 70 material C45 SKU: 61820400](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-70-material-c45-sku-61820400/): Material: C45K.Version A. - [Feather key DIN 6885-1 version A 12 x 8 x 65 material C45 SKU: 61820300](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-65-material-c45-sku-61820300/): Material: C45K.Version A. - [Precision spur gear made of steel 16MnCr5 module 2 39 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 86.8mm SKU: 25103932](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-39-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-86-8mm-sku-25103932/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 36 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 80.4mm SKU: 25103635](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-36-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-80-4mm-sku-25103635/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 32 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 71.9mm SKU: 25103235](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-32-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-71-9mm-sku-25103235/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 32 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 71.9mm SKU: 25103225](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-32-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-71-9mm-sku-25103225/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 32 teeth bore 20H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 71.9mm SKU: 25103220](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-32-teeth-bore-20h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-71-9mm-sku-25103220/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103032](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103032/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 30H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103030](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-30h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103030/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103025/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103022](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103022/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 20H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-20h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103020/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 30 teeth bore 16H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 67.7mm SKU: 25103016](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-30-teeth-bore-16h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-67-7mm-sku-25103016/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 28 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 63.4mm SKU: 25102835](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-28-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-63-4mm-sku-25102835/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 25 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 57.1mm SKU: 25102525](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-25-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-57-1mm-sku-25102525/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 25 teeth bore 20H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 57.1mm SKU: 25102520](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-25-teeth-bore-20h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-57-1mm-sku-25102520/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 21 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 48.6mm SKU: 25102122](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-21-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-48-6mm-sku-25102122/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 21 teeth bore 16H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 48.6mm SKU: 25102116](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-21-teeth-bore-16h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-48-6mm-sku-25102116/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 20 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 46.4mm SKU: 25102022](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-20-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-46-4mm-sku-25102022/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 20 teeth bore 20H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 46.4mm SKU: 25102020](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-20-teeth-bore-20h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-46-4mm-sku-25102020/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Gear rack steel C45K module 10 tooth width 100mm height 100mm length 1500mm SKU: 24960500](https://maedler.in/product/gear-rack-steel-c45k-module-10-tooth-width-100mm-height-100mm-length-1500mm-sku-24960500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 10 tooth width 100mm height 100mm length 1000mm SKU: 24960300](https://maedler.in/product/gear-rack-steel-c45k-module-10-tooth-width-100mm-height-100mm-length-1000mm-sku-24960300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 8 tooth width 80mm height 80mm length 1500mm SKU: 24860300](https://maedler.in/product/gear-rack-steel-c45k-module-8-tooth-width-80mm-height-80mm-length-1500mm-sku-24860300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 8 tooth width 80mm height 80mm length 1000mm SKU: 24860100](https://maedler.in/product/gear-rack-steel-c45k-module-8-tooth-width-80mm-height-80mm-length-1000mm-sku-24860100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 8 tooth width 80mm height 80mm length approx. 324mm SKU: 24860000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-8-tooth-width-80mm-height-80mm-length-approx-324mm-sku-24860000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 2000mm teeth induction hardened SKU: 24688609](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-2000mm-teeth-induction-hardened-sku-24688609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 1000mm teeth induction hardened SKU: 24688605](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-1000mm-teeth-induction-hardened-sku-24688605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 6 diameter = 60 mm h6 length = 2000 mm SKU: 24666634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-6-diameter-60-mm-h6-length-2000-mm-sku-24666634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 6 diameter = 60 mm h6 length = 1000 mm SKU: 24666632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-6-diameter-60-mm-h6-length-1000-mm-sku-24666632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 6 diameter = 60 mm h6 length = 500 mm SKU: 24666631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-6-diameter-60-mm-h6-length-500-mm-sku-24666631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel module 6 diameter 60mm h6 length 2000mm SKU: 24663400](https://maedler.in/product/round-gear-rack-made-of-steel-module-6-diameter-60mm-h6-length-2000mm-sku-24663400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 6 diameter 60mm h6 length 1000mm SKU: 24663200](https://maedler.in/product/round-gear-rack-made-of-steel-module-6-diameter-60mm-h6-length-1000mm-sku-24663200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 6 diameter 60mm h6 length 500mm SKU: 24663100](https://maedler.in/product/round-gear-rack-made-of-steel-module-6-diameter-60mm-h6-length-500mm-sku-24663100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 2000mm SKU: 24660700](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-2000mm-sku-24660700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 1500mm SKU: 24660500](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-1500mm-sku-24660500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 1000mm SKU: 24660300](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-1000mm-sku-24660300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 6 tooth width 60mm height 60mm length 500mm SKU: 24660100](https://maedler.in/product/gear-rack-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-500mm-sku-24660100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 6 tooth width 60mm height 60mm length approx. 241mm SKU: 24660000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-6-tooth-width-60mm-height-60mm-length-approx-241mm-sku-24660000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack made of steel C45 black oxide finished module 6 tooth width 60mm height 60mm nominal length 2000mm SKU: 24611609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-6-tooth-width-60mm-height-60mm-nominal-length-2000mm-sku-24611609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 6 tooth width 60mm height 60mm nominal length 1000mm SKU: 24611605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-6-tooth-width-60mm-height-60mm-nominal-length-1000mm-sku-24611605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 2000mm teeth induction hardened SKU: 24588609](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-2000mm-teeth-induction-hardened-sku-24588609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 1000mm teeth induction hardened SKU: 24588605](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-1000mm-teeth-induction-hardened-sku-24588605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 5 diameter = 50 mm h6 length = 2000 mm SKU: 24566634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-5-diameter-50-mm-h6-length-2000-mm-sku-24566634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 5 diameter = 50 mm h6 length = 1000 mm SKU: 24566632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-5-diameter-50-mm-h6-length-1000-mm-sku-24566632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 5 diameter = 50 mm h6 length = 500 mm SKU: 24566631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-5-diameter-50-mm-h6-length-500-mm-sku-24566631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel module 5 diameter 50mm h6 length 2000mm SKU: 24563400](https://maedler.in/product/round-gear-rack-made-of-steel-module-5-diameter-50mm-h6-length-2000mm-sku-24563400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 5 diameter 50mm h6 length 1000mm SKU: 24563200](https://maedler.in/product/round-gear-rack-made-of-steel-module-5-diameter-50mm-h6-length-1000mm-sku-24563200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 5 diameter 50mm h6 length 500mm SKU: 24563100](https://maedler.in/product/round-gear-rack-made-of-steel-module-5-diameter-50mm-h6-length-500mm-sku-24563100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 5, diameter = 50 mm h6 length =250 mm SKU: 24563000](https://maedler.in/product/round-gear-rack-made-of-steel-module-5-diameter-50-mm-h6-length-250-mm-sku-24563000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 2000mm SKU: 24560900](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-2000mm-sku-24560900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 1500mm SKU: 24560700](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-1500mm-sku-24560700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 1000mm SKU: 24560500](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-1000mm-sku-24560500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 50mm height 50mm length 500mm SKU: 24560300](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-50mm-height-50mm-length-500mm-sku-24560300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 5 tooth width 40mm height 50mm length 1000mm SKU: 24560100](https://maedler.in/product/gear-rack-steel-c45k-module-5-tooth-width-40mm-height-50mm-length-1000mm-sku-24560100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 5 tooth width 40mm height 50mm length approx. 201mm SKU: 24560000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-5-tooth-width-40mm-height-50mm-length-approx-201mm-sku-24560000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack made of steel C45 black oxide finished module 5 tooth width 50mm height 50mm nominal length 2000mm SKU: 24511609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-5-tooth-width-50mm-height-50mm-nominal-length-2000mm-sku-24511609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 5 tooth width 50mm height 50mm nominal length 1000mm SKU: 24511605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-5-tooth-width-50mm-height-50mm-nominal-length-1000mm-sku-24511605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of 1.4305 module 4 diameter 40mm h9 length 2000mm SKU: 24499634](https://maedler.in/product/round-gear-rack-made-of-1-4305-module-4-diameter-40mm-h9-length-2000mm-sku-24499634/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 4 diameter 40mm h9 length 1000mm SKU: 24499632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-4-diameter-40mm-h9-length-1000mm-sku-24499632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 4 diameter 40mm h9 length 500mm SKU: 24499631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-4-diameter-40mm-h9-length-500mm-sku-24499631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 4 tooth width 40mm height 40mm length 2000mm SKU: 24499609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-2000mm-sku-24499609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 4 tooth width 40mm height 40mm length 1500mm SKU: 24499607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-1500mm-sku-24499607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 4 tooth width 40mm height 40mm length 1000mm SKU: 24499605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-1000mm-sku-24499605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 4 tooth width 40mm height 40mm length 500mm SKU: 24499603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-500mm-sku-24499603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 4 tooth width 40mm height 40mm length approx. 162mm SKU: 24499600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-4-tooth-width-40mm-height-40mm-length-approx-162mm-sku-24499600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 2000mm teeth induction hardened SKU: 24488609](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-2000mm-teeth-induction-hardened-sku-24488609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 1000mm teeth induction hardened SKU: 24488605](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-1000mm-teeth-induction-hardened-sku-24488605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of high strength steel module = 4 diameter = 40 mm h6 length = 2000 mm SKU: 24466634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-4-diameter-40-mm-h6-length-2000-mm-sku-24466634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 4 diameter = 40 mm h6 length = 1000 mm SKU: 24466632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-4-diameter-40-mm-h6-length-1000-mm-sku-24466632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 4 diameter = 40 mm h6 length = 500 mm SKU: 24466631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-4-diameter-40-mm-h6-length-500-mm-sku-24466631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel C45K module 4 diameter 40mm h6 length 2000mm SKU: 24463400](https://maedler.in/product/round-gear-rack-made-of-steel-c45k-module-4-diameter-40mm-h6-length-2000mm-sku-24463400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 4 diameter 40mm h6 length 1000mm SKU: 24463200](https://maedler.in/product/round-gear-rack-made-of-steel-module-4-diameter-40mm-h6-length-1000mm-sku-24463200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 4 diameter 40mm h6 length 500mm SKU: 24463100](https://maedler.in/product/round-gear-rack-made-of-steel-module-4-diameter-40mm-h6-length-500mm-sku-24463100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 4, diameter = 40 mm h6 length = 250mm SKU: 24463000](https://maedler.in/product/round-gear-rack-made-of-steel-module-4-diameter-40-mm-h6-length-250mm-sku-24463000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 2000mm SKU: 24460900](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-2000mm-sku-24460900/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 1500mm SKU: 24460700](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-1500mm-sku-24460700/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 1000mm SKU: 24460500](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-1000mm-sku-24460500/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 40mm height 40mm length 500mm SKU: 24460300](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-40mm-height-40mm-length-500mm-sku-24460300/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 4 tooth width 30mm height 40mm length 1000mm SKU: 24460100](https://maedler.in/product/gear-rack-steel-c45k-module-4-tooth-width-30mm-height-40mm-length-1000mm-sku-24460100/): Material: Bright steel C45K. Milled teeth. Precisely Straightened. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 3: -0,3 mm. Module 5 to 8: -0,4 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Mounting aid for gear racks steel C45K module 4 tooth width 30mm height 40mm length approx. 162mm SKU: 24460000](https://maedler.in/product/mounting-aid-for-gear-racks-steel-c45k-module-4-tooth-width-30mm-height-40mm-length-approx-162mm-sku-24460000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack made of steel C45 black oxide finished module 4 tooth width 40mm height 40mm nominal length 2000mm SKU: 24411609](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-4-tooth-width-40mm-height-40mm-nominal-length-2000mm-sku-24411609/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of steel C45 black oxide finished module 4 tooth width 40mm height 40mm nominal length 1000mm SKU: 24411605](https://maedler.in/product/gear-rack-made-of-steel-c45-black-oxide-finished-module-4-tooth-width-40mm-height-40mm-nominal-length-1000mm-sku-24411605/): Material: Steel C45, black oxide finish. Milled teeth. Straight tooth. Pressure angle 20°. Tooth quality 9. From Module 2,5 cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Round gear rack made of 1.4305 module 3 diameter 30mm h9 length 2000mm SKU: 24399634](https://maedler.in/product/round-gear-rack-made-of-1-4305-module-3-diameter-30mm-h9-length-2000mm-sku-24399634/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 3 diameter 30mm h9 length 1000mm SKU: 24399632](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-3-diameter-30mm-h9-length-1000mm-sku-24399632/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Round gear rack made of stainless steel 1.4305 module 3 diameter 30mm h9 length 500mm SKU: 24399631](https://maedler.in/product/round-gear-rack-made-of-stainless-steel-1-4305-module-3-diameter-30mm-h9-length-500mm-sku-24399631/): Material: Stainless steel 1.4305 (AISI 303). Outside diameter = h9 drawn. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. - [Gear rack made of stainless steel 1.4305 module 3 tooth width 30mm height 30mm length 2000mm SKU: 24399609](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-2000mm-sku-24399609/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 3 tooth width 30mm height 30mm length 1500mm SKU: 24399607](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-1500mm-sku-24399607/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 3 tooth width 30mm height 30mm length 1000mm SKU: 24399605](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-1000mm-sku-24399605/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Gear rack made of stainless steel 1.4305 module 3 tooth width 30mm height 30mm length 500mm SKU: 24399603](https://maedler.in/product/gear-rack-made-of-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-500mm-sku-24399603/): Material: Stainless steel 1.4305 (AISI 303). Milled teeth, precisely straightened. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. From Module 2, except for nominal length 500 mm, cut for continuous linking. - [Mounting aid for gear racks stainless steel 1.4305 module 3 tooth width 30mm height 30mm length approx. 120mm SKU: 24399600](https://maedler.in/product/mounting-aid-for-gear-racks-stainless-steel-1-4305-module-3-tooth-width-30mm-height-30mm-length-approx-120mm-sku-24399600/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 2000mm teeth induction hardened SKU: 24388609](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-2000mm-teeth-induction-hardened-sku-24388609/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack steel C45K module 3 tooth width 30mm height 30mm length 1000mm teeth induction hardened SKU: 24388605](https://maedler.in/product/gear-rack-steel-c45k-module-3-tooth-width-30mm-height-30mm-length-1000mm-teeth-induction-hardened-sku-24388605/): Material: Bright steel C45K. Tooth area induction hardened, 54 +4 HRC. Precisely Straightened. Teeth milled in quality 8. But the hardening sets the tooth quality to 10-11. Cross-section tolerance h11 = -1/10 to -2/10 depending on size. Straight teeth. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3962, 3967, 3968. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimension a and h0: Module 2: -0,2 mm. Module 3 to 4: -0,3 mm. Module 5: -0,4 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Precision gear rack module 3 25 x 25 x 1000mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 24368500](https://maedler.in/product/precision-gear-rack-module-3-25-x-25-x-1000mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-24368500/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Precision gear rack module 3 25 x 25 x 500mm long material 16MnCr5 teeth induction hardened ground all-sided SKU: 24368300](https://maedler.in/product/precision-gear-rack-module-3-25-x-25-x-500mm-long-material-16mncr5-teeth-induction-hardened-ground-all-sided-sku-24368300/): Material: 16MnCr5, tooth area induction hardened, HRC 58 ±2. Ground on all sides including the teeth. As only the teeth are hardened subsequent drilling and pinning is easily possible. Straight teeth. Pressure angle 20°. Teeth milled, hardened and ground. Tooth quality 7h25. From Module 1,5 cut for continuous linking. Tolerances: Angle accuracy 0,02 mm. Parallelism at length 500 mm = 0,03 mm. Parallelism at length 1000 mm = 0,05 mm. Tolerance to h0-line: on 500 mm = 0,03 mm. on 1000 mm = 0,05 mm. The width is machined with a tolerance of 0,05. - [Precision mounting aid for gear racks steel 16MnCr5 module 3 tooth width 25mm height 25mm length approx. 120mm teeth hardened ground SKU: 24368000](https://maedler.in/product/precision-mounting-aid-for-gear-racks-steel-16mncr5-module-3-tooth-width-25mm-height-25mm-length-approx-120mm-teeth-hardened-ground-sku-24368000/): Material:Steel C45KG, tooth quality 8d25.Steel 16MnCr5, tooth quality 7h25.Stainless steel 1.4305 (AISI 303), tooth quality 8d25.Reference profile 2 DIN 867 / DIN 3972. Pressure angle 20º. Tooth quality according to DIN 3967.Milled teeth. Versions from steel 16MnCr5 have induction hardened teeth, ground at all long surfaces, including teeth.All these mounting aids have 13 teeth.Other dimensions and designs on request.Production-related tolerances of dimensions ha and h0:module 1.5 - 2: -0.2 mm, module 2.5 - 4: -0.3 mm, module 5 - 8: -0.4 mm - [Round gear rack made of high strength steel module = 3 diameter = 30 mm h6 length = 2000 mm SKU: 24366634](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-3-diameter-30-mm-h6-length-2000-mm-sku-24366634/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 3 diameter = 30 mm h6 length = 1000 mm SKU: 24366632](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-3-diameter-30-mm-h6-length-1000-mm-sku-24366632/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of high strength steel module = 3 diameter = 30 mm h6 length = 500 mm SKU: 24366631](https://maedler.in/product/round-gear-rack-made-of-high-strength-steel-module-3-diameter-30-mm-h6-length-500-mm-sku-24366631/): Material: Special steel, strength ca. 1.000 N/mm². Outside diameter = h6 ground. Product No. 224 666 31 and 224 666 32 Ø-tolerance h9. Tooth flanks not ground. Pressure angle 20°. Milled teeth. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 to 4: -0,3 mm. Module 5 to 6: -0,4 mm. - [Round gear rack made of steel C45 module 3 diameter 30mm h6 length 2000mm SKU: 24363400](https://maedler.in/product/round-gear-rack-made-of-steel-c45-module-3-diameter-30mm-h6-length-2000mm-sku-24363400/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 3 diameter 30mm h6 length 1000mm SKU: 24363200](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-diameter-30mm-h6-length-1000mm-sku-24363200/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel module 3 diameter 30mm h6 length 500mm SKU: 24363100](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-diameter-30mm-h6-length-500mm-sku-24363100/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Round gear rack made of steel, module = 3, diameter = 30 mm h6 length = 250mm SKU: 24363000](https://maedler.in/product/round-gear-rack-made-of-steel-module-3-diameter-30-mm-h6-length-250mm-sku-24363000/): Material: Up to length 1,500mm: Steel St50K. Length 2000mm = Steel C45k. Outside diameter = h6 ground. Straight teeth, milled. Pressure angle 20°. Tooth quality 8d25 modelled on DIN 3967. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances. Dimensions ha and h0: up to Module 2: -0,2 mm. Module 2,5 - 4: -0,3 mm. Module 5 - 6: -0,4 mm. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181416](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181415](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181414](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181414/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181412](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181412/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181318](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181318/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181316](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181316/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181315](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181315/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181314](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181314/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181312](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181312/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 13 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181310](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-13-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181310/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181216](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181216/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181215](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181215/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181214](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181214/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181212](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181212/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 12 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181210](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-12-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181210/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181116](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181116/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181115](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181115/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181114](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181114/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181112](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181112/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 11 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181110](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-11-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181110/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181014](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181014/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181012](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181012/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 11H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181011](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-11h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181011/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 10 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181010](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-10-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181010/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRTG 06 B-1 3/8x7/32" 30 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178130](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 28 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178128](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 27 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178127](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 26 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178126](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 25 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178125](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 24 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178124](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 23 teeth material steel teeth hardened for taper bush type 1210 SKU: 10178123](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10178123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 22 teeth material steel teeth hardened for taper bush type 1108 SKU: 10178122](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-1108-sku-10178122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 21 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178121](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 20 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178120](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 19 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178119](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 18 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178118](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 06 B-1 3/8x7/32" 17 teeth material steel teeth hardened for taper bush type 1008 SKU: 10178117](https://maedler.in/product/sprocket-krtg-06-b-1-3-8x7-32-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10178117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 114 teeth material cast iron for taper bush type 1215 SKU: 10177188G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-114-teeth-material-cast-iron-for-taper-bush-type-1215-sku-10177188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material cast iron for taper bush type 1210 SKU: 10177183G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-95-teeth-material-cast-iron-for-taper-bush-type-1210-sku-10177183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 95 teeth material steel for taper bush type 1210 SKU: 10177183](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-95-teeth-material-steel-for-taper-bush-type-1210-sku-10177183/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 76 teeth material cast iron for taper bush type 1210 SKU: 10177176G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-76-teeth-material-cast-iron-for-taper-bush-type-1210-sku-10177176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 57 teeth material cast iron for taper bush type 1210 SKU: 10177157G](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-57-teeth-material-cast-iron-for-taper-bush-type-1210-sku-10177157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 57 teeth material steel for taper bush type 1210 SKU: 10177157](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-57-teeth-material-steel-for-taper-bush-type-1210-sku-10177157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 45 teeth material steel for taper bush type 1210 SKU: 10177145](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-45-teeth-material-steel-for-taper-bush-type-1210-sku-10177145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 38 teeth material steel for taper bush type 1210 SKU: 10177138](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-38-teeth-material-steel-for-taper-bush-type-1210-sku-10177138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 30 teeth material steel for taper bush type 1210 SKU: 10177130](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-30-teeth-material-steel-for-taper-bush-type-1210-sku-10177130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 28 teeth material steel for taper bush type 1210 SKU: 10177128](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-28-teeth-material-steel-for-taper-bush-type-1210-sku-10177128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 27 teeth material steel for taper bush type 1210 SKU: 10177127](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-27-teeth-material-steel-for-taper-bush-type-1210-sku-10177127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 26 teeth material steel for taper bush type 1210 SKU: 10177126](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-26-teeth-material-steel-for-taper-bush-type-1210-sku-10177126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 25 teeth material steel for taper bush type 1210 SKU: 10177125](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-25-teeth-material-steel-for-taper-bush-type-1210-sku-10177125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 24 teeth material steel for taper bush type 1210 SKU: 10177124](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-24-teeth-material-steel-for-taper-bush-type-1210-sku-10177124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 23 teeth material steel for taper bush type 1210 SKU: 10177123](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-23-teeth-material-steel-for-taper-bush-type-1210-sku-10177123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 22 teeth material steel for taper bush type 1108 SKU: 10177122](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-22-teeth-material-steel-for-taper-bush-type-1108-sku-10177122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 21 teeth material steel for taper bush type 1008 SKU: 10177121](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-21-teeth-material-steel-for-taper-bush-type-1008-sku-10177121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 20 teeth material steel for taper bush type 1008 SKU: 10177120](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-20-teeth-material-steel-for-taper-bush-type-1008-sku-10177120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 19 teeth material steel for taper bush type 1008 SKU: 10177119](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-19-teeth-material-steel-for-taper-bush-type-1008-sku-10177119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 18 teeth material steel for taper bush type 1008 SKU: 10177118](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-18-teeth-material-steel-for-taper-bush-type-1008-sku-10177118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 06 B-1 3/8x7/32" 17 teeth material steel for taper bush type 1008 SKU: 10177117](https://maedler.in/product/sprocket-krt-06-b-1-3-8x7-32-17-teeth-material-steel-for-taper-bush-type-1008-sku-10177117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 25 teeth material polyacetal resin SKU: 10152500](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-25-teeth-material-polyacetal-resin-sku-10152500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 23 teeth material polyacetal resin SKU: 10152300](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-23-teeth-material-polyacetal-resin-sku-10152300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 21 teeth material polyacetal resin SKU: 10152100](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-21-teeth-material-polyacetal-resin-sku-10152100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 19 teeth material polyacetal resin SKU: 10151900](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-19-teeth-material-polyacetal-resin-sku-10151900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 17 teeth material polyacetal resin SKU: 10151700](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-17-teeth-material-polyacetal-resin-sku-10151700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 15 teeth material polyacetal resin SKU: 10151500](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-15-teeth-material-polyacetal-resin-sku-10151500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRK with hub 06 B-1 3/8 X 7/32" 13 teeth material polyacetal resin SKU: 10151300](https://maedler.in/product/sprocket-krk-with-hub-06-b-1-3-8-x-7-32-13-teeth-material-polyacetal-resin-sku-10151300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 114 teeth material steel SKU: 10128800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-114-teeth-material-steel-sku-10128800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 95 teeth material steel SKU: 10128300](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-95-teeth-material-steel-sku-10128300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 80 teeth material steel SKU: 10128000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-80-teeth-material-steel-sku-10128000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 76 teeth material steel SKU: 10127600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-76-teeth-material-steel-sku-10127600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 72 teeth material steel SKU: 10127200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-72-teeth-material-steel-sku-10127200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 70 teeth material steel SKU: 10127000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-70-teeth-material-steel-sku-10127000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 65 teeth material steel SKU: 10126500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-65-teeth-material-steel-sku-10126500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 60 teeth material steel SKU: 10126000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-60-teeth-material-steel-sku-10126000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 57 teeth material steel SKU: 10125700](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-57-teeth-material-steel-sku-10125700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 54 teeth material steel SKU: 10125400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-54-teeth-material-steel-sku-10125400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 50 teeth material steel SKU: 10125000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-50-teeth-material-steel-sku-10125000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 48 teeth material steel SKU: 10124800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-48-teeth-material-steel-sku-10124800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 45 teeth material steel SKU: 10124500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-45-teeth-material-steel-sku-10124500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 44 teeth material steel SKU: 10124400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-44-teeth-material-steel-sku-10124400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 42 teeth material steel SKU: 10124200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-42-teeth-material-steel-sku-10124200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 40 teeth material steel SKU: 10124000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-40-teeth-material-steel-sku-10124000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 38 teeth material steel SKU: 10123800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-38-teeth-material-steel-sku-10123800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 36 teeth material steel SKU: 10123600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-36-teeth-material-steel-sku-10123600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 35 teeth material steel SKU: 10123500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-35-teeth-material-steel-sku-10123500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 32 teeth material steel SKU: 10123200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-32-teeth-material-steel-sku-10123200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 30 teeth material steel SKU: 10123000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-30-teeth-material-steel-sku-10123000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 28 teeth material steel SKU: 10122800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-28-teeth-material-steel-sku-10122800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 27 teeth material steel SKU: 10122700](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-27-teeth-material-steel-sku-10122700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 26 teeth material steel SKU: 10122600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-26-teeth-material-steel-sku-10122600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 25 teeth material steel SKU: 10122500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-25-teeth-material-steel-sku-10122500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 24 teeth material steel SKU: 10122400](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-24-teeth-material-steel-sku-10122400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 23 teeth material steel SKU: 10122300](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-23-teeth-material-steel-sku-10122300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 22 teeth material steel SKU: 10122200](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-22-teeth-material-steel-sku-10122200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 21 teeth material steel SKU: 10122100](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-21-teeth-material-steel-sku-10122100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 20 teeth material steel SKU: 10122000](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-20-teeth-material-steel-sku-10122000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 19 teeth material steel SKU: 10121900](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-19-teeth-material-steel-sku-10121900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 18 teeth material steel SKU: 10121800](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-18-teeth-material-steel-sku-10121800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 17 teeth material steel SKU: 10121700](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-17-teeth-material-steel-sku-10121700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 16 teeth material steel SKU: 10121600](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-16-teeth-material-steel-sku-10121600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 06 B-1 3/8x7/32" 15 teeth material steel SKU: 10121500](https://maedler.in/product/plate-wheel-krl-without-hub-06-b-1-3-8x7-32-15-teeth-material-steel-sku-10121500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Parallel pin DIN 6325 hardened steel diameter 20m6 length 80mm SKU: 61842080](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-20m6-length-80mm-sku-61842080/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 20m6 length 60mm SKU: 61842060](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-20m6-length-60mm-sku-61842060/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 20m6 length 50mm SKU: 61842050](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-20m6-length-50mm-sku-61842050/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 16m6 length 100mm SKU: 61841695](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-16m6-length-100mm-sku-61841695/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 16m6 length 90mm SKU: 61841690](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-16m6-length-90mm-sku-61841690/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 16m6 length 80mm SKU: 61841680](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-16m6-length-80mm-sku-61841680/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 16m6 length 70mm SKU: 61841670](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-16m6-length-70mm-sku-61841670/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 16m6 length 60mm SKU: 61841660](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-16m6-length-60mm-sku-61841660/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 16m6 length 55mm SKU: 61841655](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-16m6-length-55mm-sku-61841655/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 16m6 length 50mm SKU: 61841650](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-16m6-length-50mm-sku-61841650/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 16m6 length 45mm SKU: 61841645](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-16m6-length-45mm-sku-61841645/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 16m6 length 40mm SKU: 61841640](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-16m6-length-40mm-sku-61841640/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1.5m6 length 16mm SKU: 61841516](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1-5m6-length-16mm-sku-61841516/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1.5m6 length 14mm SKU: 61841514](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1-5m6-length-14mm-sku-61841514/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1.5m6 length 12mm SKU: 61841512](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1-5m6-length-12mm-sku-61841512/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1.5m6 length 10mm SKU: 61841510](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1-5m6-length-10mm-sku-61841510/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1.5m6 length 8mm SKU: 61841508](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1-5m6-length-8mm-sku-61841508/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1.5m6 length 6mm SKU: 61841506](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1-5m6-length-6mm-sku-61841506/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1.5m6 length 5mm SKU: 61841505](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1-5m6-length-5mm-sku-61841505/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 1.5m6 length 4mm SKU: 61841504](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-1-5m6-length-4mm-sku-61841504/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 100mm SKU: 61841295](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-100mm-sku-61841295/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 90mm SKU: 61841290](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-90mm-sku-61841290/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 80mm SKU: 61841280](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-80mm-sku-61841280/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 70mm SKU: 61841270](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-70mm-sku-61841270/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 60mm SKU: 61841260](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-60mm-sku-61841260/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 55mm SKU: 61841255](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-55mm-sku-61841255/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 50mm SKU: 61841250](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-50mm-sku-61841250/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 45mm SKU: 61841245](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-45mm-sku-61841245/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 40mm SKU: 61841240](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-40mm-sku-61841240/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 36mm SKU: 61841236](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-36mm-sku-61841236/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 32mm SKU: 61841232](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-32mm-sku-61841232/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 30mm SKU: 61841230](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-30mm-sku-61841230/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 28mm SKU: 61841228](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-28mm-sku-61841228/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 12m6 length 26mm SKU: 61841226](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-12m6-length-26mm-sku-61841226/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 100mm SKU: 61841095](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-100mm-sku-61841095/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 90mm SKU: 61841090](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-90mm-sku-61841090/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 80mm SKU: 61841080](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-80mm-sku-61841080/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 70mm SKU: 61841070](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-70mm-sku-61841070/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 60mm SKU: 61841060](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-60mm-sku-61841060/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 55mm SKU: 61841055](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-55mm-sku-61841055/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 50mm SKU: 61841050](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-50mm-sku-61841050/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 45mm SKU: 61841045](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-45mm-sku-61841045/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 40mm SKU: 61841040](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-40mm-sku-61841040/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 36mm SKU: 61841036](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-36mm-sku-61841036/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 32mm SKU: 61841032](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-32mm-sku-61841032/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 30mm SKU: 61841030](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-30mm-sku-61841030/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 28mm SKU: 61841028](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-28mm-sku-61841028/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 26mm SKU: 61841026](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-26mm-sku-61841026/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 24mm SKU: 61841024](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-24mm-sku-61841024/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 10m6 length 22mm SKU: 61841022](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-10m6-length-22mm-sku-61841022/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 80mm SKU: 61840880](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-80mm-sku-61840880/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 70mm SKU: 61840870](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-70mm-sku-61840870/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 60mm SKU: 61840860](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-60mm-sku-61840860/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 55mm SKU: 61840855](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-55mm-sku-61840855/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 50mm SKU: 61840850](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-50mm-sku-61840850/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 45mm SKU: 61840845](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-45mm-sku-61840845/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 40mm SKU: 61840840](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-40mm-sku-61840840/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 36mm SKU: 61840836](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-36mm-sku-61840836/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 32mm SKU: 61840832](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-32mm-sku-61840832/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 30mm SKU: 61840830](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-30mm-sku-61840830/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 28mm SKU: 61840828](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-28mm-sku-61840828/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 26mm SKU: 61840826](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-26mm-sku-61840826/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 24mm SKU: 61840824](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-24mm-sku-61840824/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 22mm SKU: 61840822](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-22mm-sku-61840822/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 20mm SKU: 61840820](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-20mm-sku-61840820/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 8m6 length 18mm SKU: 61840818](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-8m6-length-18mm-sku-61840818/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 60mm SKU: 61840660](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-60mm-sku-61840660/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 55mm SKU: 61840655](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-55mm-sku-61840655/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 50mm SKU: 61840650](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-50mm-sku-61840650/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 45mm SKU: 61840645](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-45mm-sku-61840645/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 40mm SKU: 61840640](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-40mm-sku-61840640/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 36mm SKU: 61840636](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-36mm-sku-61840636/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 32mm SKU: 61840632](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-32mm-sku-61840632/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 30mm SKU: 61840630](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-30mm-sku-61840630/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 28mm SKU: 61840628](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-28mm-sku-61840628/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 26mm SKU: 61840626](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-26mm-sku-61840626/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 24mm SKU: 61840624](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-24mm-sku-61840624/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 22mm SKU: 61840622](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-22mm-sku-61840622/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 20mm SKU: 61840620](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-20mm-sku-61840620/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 18mm SKU: 61840618](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-18mm-sku-61840618/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 16mm SKU: 61840616](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-16mm-sku-61840616/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 6m6 length 14mm SKU: 61840614](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-6m6-length-14mm-sku-61840614/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 50mm SKU: 61840550](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-50mm-sku-61840550/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 45mm SKU: 61840545](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-45mm-sku-61840545/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 40mm SKU: 61840540](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-40mm-sku-61840540/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 36mm SKU: 61840536](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-36mm-sku-61840536/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 32mm SKU: 61840532](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-32mm-sku-61840532/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 30mm SKU: 61840530](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-30mm-sku-61840530/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 28mm SKU: 61840528](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-28mm-sku-61840528/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 26mm SKU: 61840526](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-26mm-sku-61840526/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 24mm SKU: 61840524](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-24mm-sku-61840524/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 22mm SKU: 61840522](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-22mm-sku-61840522/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 20mm SKU: 61840520](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-20mm-sku-61840520/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 18mm SKU: 61840518](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-18mm-sku-61840518/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 16mm SKU: 61840516](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-16mm-sku-61840516/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 14mm SKU: 61840514](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-14mm-sku-61840514/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 5m6 length 12mm SKU: 61840512](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-5m6-length-12mm-sku-61840512/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 40mm SKU: 61840440](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-40mm-sku-61840440/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 36mm SKU: 61840436](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-36mm-sku-61840436/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 4m6 length 32mm SKU: 61840432](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-4m6-length-32mm-sku-61840432/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Gear rack made of polyketone die-cast module 3 tooth width 19.4mm height 15mm length 250mm SKU: 28860101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-3-tooth-width-19-4mm-height-15mm-length-250mm-sku-28860101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 3 tooth width 19.4mm height 15mm length 250mm SKU: 28860100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-3-tooth-width-19-4mm-height-15mm-length-250mm-sku-28860100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 2,5 tooth width 17mm height 13mm length 250mm SKU: 28760101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-25-tooth-width-17mm-height-13mm-length-250mm-sku-28760101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketonedie-cast module 2 tooth width 15.4mm height 11mm length 250mm SKU: 28660101](https://maedler.in/product/gear-rack-made-of-polyketonedie-cast-module-2-tooth-width-15-4mm-height-11mm-length-250mm-sku-28660101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 2 tooth width 15.4mm height 11mm length 250mm SKU: 28660100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-2-tooth-width-15-4mm-height-11mm-length-250mm-sku-28660100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 1.5 tooth width 12mm height 12mm length 250mm SKU: 28560101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-1-5-tooth-width-12mm-height-12mm-length-250mm-sku-28560101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 1.5 tooth width 12mm height 12mm length 250mm SKU: 28560100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-1-5-tooth-width-12mm-height-12mm-length-250mm-sku-28560100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 1.25 tooth width 10mm height 11mm length 250mm SKU: 28460101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-1-25-tooth-width-10mm-height-11mm-length-250mm-sku-28460101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 1.25 tooth width 10mm height 11mm length 250mm SKU: 28460100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-1-25-tooth-width-10mm-height-11mm-length-250mm-sku-28460100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 1 tooth width 9mm height 9mm length 250mm SKU: 28360101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-1-tooth-width-9mm-height-9mm-length-250mm-sku-28360101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 1 tooth width 9mm height 9mm length 250mm SKU: 28360100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-1-tooth-width-9mm-height-9mm-length-250mm-sku-28360100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 0.7 tooth width 6mm height 6.7mm length 250mm SKU: 28260101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-0-7-tooth-width-6mm-height-6-7mm-length-250mm-sku-28260101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 0.7 tooth width 6mm height 6.7mm length 250mm SKU: 28260100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-0-7-tooth-width-6mm-height-6-7mm-length-250mm-sku-28260100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 0.5 tooth width 4mm height 6mm length 250mm SKU: 28160201](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-0-5-tooth-width-4mm-height-6mm-length-250mm-sku-28160201/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 0.5 tooth width 4mm height 6mm length 250mm SKU: 28160200](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-0-5-tooth-width-4mm-height-6mm-length-250mm-sku-28160200/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyketone die-cast module 0.5 tooth width 4mm height 4.5mm length 250mm SKU: 28160101](https://maedler.in/product/gear-rack-made-of-polyketone-die-cast-module-0-5-tooth-width-4mm-height-4-5mm-length-250mm-sku-28160101/): Material: Polyketone. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of polyacetal resin die-cast module 0.5 tooth width 4mm height 4.5mm length 250mm SKU: 28160100](https://maedler.in/product/gear-rack-made-of-polyacetal-resin-die-cast-module-0-5-tooth-width-4mm-height-4-5mm-length-250mm-sku-28160100/): Material: Polyacetal Resin, die-cast. Because of the material used, plastic gear racks are not straightened. Straight Teeth. Pressure angle 20°. Nominal length 250 mm. *The real length is roughly one multiple of the pitch. - [Gear rack made of brass Ms 58 module 0.5 width 10mm height 4mm length 500mm helical tooth 20° left handed SKU: 26960600](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-0-5-width-10mm-height-4mm-length-500mm-helical-tooth-20-left-handed-sku-26960600/): Material: Brass Ms58 (2.0401), milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention: These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Gear rack made of brass Ms 58 module 0.5 width 10mm height 4mm length 250mm helical tooth 20° left handed SKU: 26960500](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-0-5-width-10mm-height-4mm-length-250mm-helical-tooth-20-left-handed-sku-26960500/): Material: Brass Ms58 (2.0401), milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention: These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Gear rack made of brass Ms 58 module 0.3 width 5mm height 3mm length 250mm helical tooth 20° left handed SKU: 26960100](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-0-3-width-5mm-height-3mm-length-250mm-helical-tooth-20-left-handed-sku-26960100/): Material: Brass Ms58 (2.0401), milled teeth. 20° helical tooth system, left hand. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. Attention: These standardized left-hand gear racks always have to be paired with right-hand-toothed pinions. - [Spur gear made of brass Ms58 with hub module 0.5 40 teeth tooth width 10mm helical tooth 20° right handed outside diameter 22.3mm SKU: 26924000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-40-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-22-3mm-sku-26924000/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 34 teeth tooth width 10mm helical tooth 20° right handed outside diameter 19.1mm SKU: 26923400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-34-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-19-1mm-sku-26923400/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 30 teeth tooth width 10mm helical tooth 20° right handed outside diameter 17.0mm SKU: 26923000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-30-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-17-0mm-sku-26923000/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 25 teeth tooth width 10mm helical tooth 20° right handed outside diameter 14.3mm SKU: 26922500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-25-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-14-3mm-sku-26922500/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 22 teeth tooth width 10mm helical tooth 20° right handed outside diameter 12.7mm SKU: 26922200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-22-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-12-7mm-sku-26922200/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.5 18 teeth tooth width 10mm helical tooth 20° right handed outside diameter 10.6mm SKU: 26921800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-5-18-teeth-tooth-width-10mm-helical-tooth-20-right-handed-outside-diameter-10-6mm-sku-26921800/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960500 or 26960600. - [Spur gear made of brass Ms58 with hub module 0.3 30 teeth tooth width 5mm helical tooth 20° right handed outside diameter 10.2mm SKU: 26903000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-30-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-10-2mm-sku-26903000/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 24 teeth tooth width 5mm helical tooth 20° right handed outside diameter 8.3mm SKU: 26902400](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-24-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-8-3mm-sku-26902400/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 20 teeth tooth width 5mm helical tooth 20° right handed outside diameter 7.0mm SKU: 26902000](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-20-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-7-0mm-sku-26902000/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 18 teeth tooth width 5mm helical tooth 20° right handed outside diameter 6.4mm SKU: 26901800](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-18-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-6-4mm-sku-26901800/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 15 teeth tooth width 5mm helical tooth 20° right handed outside diameter 5.4mm SKU: 26901500](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-15-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-5-4mm-sku-26901500/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Spur gear made of brass Ms58 with hub module 0.3 12 teeth tooth width 5mm helical tooth 20° right handed outside diameter 4.4mm SKU: 26901200](https://maedler.in/product/spur-gear-made-of-brass-ms58-with-hub-module-0-3-12-teeth-tooth-width-5mm-helical-tooth-20-right-handed-outside-diameter-4-4mm-sku-26901200/): Material: Brass Ms58 (2.0401). Milled teeth. 20° helical tooth system, right hand. Pressure angle 20°. Within one module series gears with helical tooth system always mesh in right-hand/left-hand pairing. To be used with our gear rack product no. 26960100 - [Gear rack made of brass Ms 58 module 1 tooth width 10mm height 10mm length 500mm SKU: 26360500](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-1-tooth-width-10mm-height-10mm-length-500mm-sku-26360500/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of brass Ms58 module 1 tooth width 10mm height 10mm length 250mm SKU: 26360300](https://maedler.in/product/gear-rack-made-of-brass-ms58-module-1-tooth-width-10mm-height-10mm-length-250mm-sku-26360300/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of brass Ms 58 module 1 tooth width 10mm height 8mm length 230mm SKU: 26360100](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-1-tooth-width-10mm-height-8mm-length-230mm-sku-26360100/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of brass Ms 58 module 1 tooth width 7mm height 5mm length 250mm SKU: 26360000](https://maedler.in/product/gear-rack-made-of-brass-ms-58-module-1-tooth-width-7mm-height-5mm-length-250mm-sku-26360000/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of brass Ms58 module 1 90 teeth tooth width 8mm outside diameter 115mm SKU: 26349000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-90-teeth-tooth-width-8mm-outside-diameter-115mm-sku-26349000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 80 teeth tooth width 8mm outside diameter 105mm SKU: 26348000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-80-teeth-tooth-width-8mm-outside-diameter-105mm-sku-26348000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 70 teeth tooth width 8mm outside diameter 95mm SKU: 26347000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-70-teeth-tooth-width-8mm-outside-diameter-95mm-sku-26347000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 65 teeth tooth width 8mm outside diameter 90mm SKU: 26346500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-65-teeth-tooth-width-8mm-outside-diameter-90mm-sku-26346500/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 60 teeth tooth width 8mm outside diameter 85mm SKU: 26346000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-60-teeth-tooth-width-8mm-outside-diameter-85mm-sku-26346000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 55 teeth tooth width 8mm outside diameter 80mm SKU: 26345500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-55-teeth-tooth-width-8mm-outside-diameter-80mm-sku-26345500/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 50 teeth tooth width 8mm outside diameter 75mm SKU: 26345000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-50-teeth-tooth-width-8mm-outside-diameter-75mm-sku-26345000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 48 teeth tooth width 8mm outside diameter 75mm SKU: 26344800](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-48-teeth-tooth-width-8mm-outside-diameter-75mm-sku-26344800/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 45 teeth tooth width 8mm outside diameter 70mm SKU: 26344500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-45-teeth-tooth-width-8mm-outside-diameter-70mm-sku-26344500/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 40 teeth tooth width 8mm outside diameter 65mm SKU: 26344000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-40-teeth-tooth-width-8mm-outside-diameter-65mm-sku-26344000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 36 teeth tooth width 8mm outside diameter 60mm SKU: 26343600](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-36-teeth-tooth-width-8mm-outside-diameter-60mm-sku-26343600/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 1 30 teeth tooth width 8mm outside diameter 55mm SKU: 26343000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-1-30-teeth-tooth-width-8mm-outside-diameter-55mm-sku-26343000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass CuSn4-Zn4Pb4 module 1 120 teeth tooth width 8mm outside diameter 145mm SKU: 26341200](https://maedler.in/product/internal-gear-made-of-brass-cusn4-zn4pb4-module-1-120-teeth-tooth-width-8mm-outside-diameter-145mm-sku-26341200/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass CuSn4Zn4Pb4 module 1 100 teeth tooth width 8mm outside diameter 125mm SKU: 26341000](https://maedler.in/product/internal-gear-made-of-brass-cusn4zn4pb4-module-1-100-teeth-tooth-width-8mm-outside-diameter-125mm-sku-26341000/): Material: Brass Ms58. From Ø 125mm: bronze 2.1076.Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of brass Ms58 module 0.7 tooth width 4mm height 6mm length 250mm SKU: 26260100](https://maedler.in/product/gear-rack-made-of-brass-ms58-module-0-7-tooth-width-4mm-height-6mm-length-250mm-sku-26260100/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of brass Ms58 module 0.7 90 teeth tooth width 6mm outside diameter 85mm SKU: 26249000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-90-teeth-tooth-width-6mm-outside-diameter-85mm-sku-26249000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 80 teeth tooth width 6mm outside diameter 80mm SKU: 26248000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-80-teeth-tooth-width-6mm-outside-diameter-80mm-sku-26248000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 70 teeth tooth width 6mm outside diameter 70mm SKU: 26247000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-70-teeth-tooth-width-6mm-outside-diameter-70mm-sku-26247000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 60 teeth tooth width 6mm outside diameter 65mm SKU: 26246000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-60-teeth-tooth-width-6mm-outside-diameter-65mm-sku-26246000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 50 teeth tooth width 6mm outside diameter 55mm SKU: 26245000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-50-teeth-tooth-width-6mm-outside-diameter-55mm-sku-26245000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 48 teeth tooth width 6mm outside diameter 55mm SKU: 26244800](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-48-teeth-tooth-width-6mm-outside-diameter-55mm-sku-26244800/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 45 teeth tooth width 6mm outside diameter 50mm SKU: 26244500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-45-teeth-tooth-width-6mm-outside-diameter-50mm-sku-26244500/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 40 teeth tooth width 6mm outside diameter 48mm SKU: 26244000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-40-teeth-tooth-width-6mm-outside-diameter-48mm-sku-26244000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.7 100 teeth tooth width 6mm outside diameter 95mm SKU: 26241000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-7-100-teeth-tooth-width-6mm-outside-diameter-95mm-sku-26241000/): Tooth quality: 8, Teeth generated. Pressure angle 20°. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of brass Ms58 module 0.5 tooth width 2mm height 4mm length 250mm SKU: 26160100](https://maedler.in/product/gear-rack-made-of-brass-ms58-module-0-5-tooth-width-2mm-height-4mm-length-250mm-sku-26160100/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Internal gear made of brass Ms58 module 0.5 90 teeth tooth width 4mm outside diameter 70mm SKU: 26149000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-90-teeth-tooth-width-4mm-outside-diameter-70mm-sku-26149000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 70 teeth tooth width 4mm outside diameter 55mm SKU: 26147000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-70-teeth-tooth-width-4mm-outside-diameter-55mm-sku-26147000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 60 teeth tooth width 4mm outside diameter 50mm SKU: 26146000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-60-teeth-tooth-width-4mm-outside-diameter-50mm-sku-26146000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 50 teeth tooth width 4mm outside diameter 45mm SKU: 26145000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-50-teeth-tooth-width-4mm-outside-diameter-45mm-sku-26145000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 48 teeth tooth width 4mm outside diameter 40mm SKU: 26144800](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-48-teeth-tooth-width-4mm-outside-diameter-40mm-sku-26144800/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 45 teeth tooth width 4mm outside diameter 40mm SKU: 26144500](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-45-teeth-tooth-width-4mm-outside-diameter-40mm-sku-26144500/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 40 teeth tooth width 4mm outside diameter 36mm SKU: 26144000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-40-teeth-tooth-width-4mm-outside-diameter-36mm-sku-26144000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Internal gear made of brass Ms58 module 0.5 100 teeth tooth width 4mm outside diameter 70mm SKU: 26141000](https://maedler.in/product/internal-gear-made-of-brass-ms58-module-0-5-100-teeth-tooth-width-4mm-outside-diameter-70mm-sku-26141000/): Tooth quality: 8, Teeth generated. Pressure angle 20. Outside-diametre tolerance in accordance with DIN ISO 2768 middle. - [Gear rack made of brass Ms58 module 0.3 tooth width 2mm height 4mm length 250mm SKU: 26060100](https://maedler.in/product/gear-rack-made-of-brass-ms58-module-0-3-tooth-width-2mm-height-4mm-length-250mm-sku-26060100/): Material: Brass Ms58 (2.0401). Milled teeth. Straight teeth. Pressure angle 20°. The teeth on the gear racks are manufactured using an overhead milling cutter. This leads to negative tolerances for dimensions a and h0: -0,2 mm. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Precision spur gear made of steel 16MnCr5 module 5 24 teeth bore 55H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 137.3mm SKU: 25502455](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-5-24-teeth-bore-55h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-137-3mm-sku-25502455/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 5 24 teeth bore 45H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 137.3mm SKU: 25502445](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-5-24-teeth-bore-45h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-137-3mm-sku-25502445/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 5 18 teeth bore 45H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 105.5mm SKU: 25501845](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-5-18-teeth-bore-45h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-105-5mm-sku-25501845/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 25 teeth bore 45H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 114.1mm SKU: 25402545](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-25-teeth-bore-45h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-114-1mm-sku-25402545/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 25 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 114.1mm SKU: 25402535](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-25-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-114-1mm-sku-25402535/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 24 teeth bore 55H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 109.9mm SKU: 25402455](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-24-teeth-bore-55h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-109-9mm-sku-25402455/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 24 teeth bore 40H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 109.9mm SKU: 25402440](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-24-teeth-bore-40h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-109-9mm-sku-25402440/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 24 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 109.9mm SKU: 25402435](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-24-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-109-9mm-sku-25402435/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 24 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 109.9mm SKU: 25402432](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-24-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-109-9mm-sku-25402432/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 21 teeth bore 40H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 97.1mm SKU: 25402140](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-21-teeth-bore-40h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-97-1mm-sku-25402140/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 21 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 97.1mm SKU: 25402135](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-21-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-97-1mm-sku-25402135/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 21 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 97.1mm SKU: 25402132](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-21-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-97-1mm-sku-25402132/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 20 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 92.9mm SKU: 25402035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-20-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-92-9mm-sku-25402035/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 18 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 84.4mm SKU: 25401832](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-18-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-84-4mm-sku-25401832/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 4 15 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 71.7mm SKU: 25401535](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-4-15-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-71-7mm-sku-25401535/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 40H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302540](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-40h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302540/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302535](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302535/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302532](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302532/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 30H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302530](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-30h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302530/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302525](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302525/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 25 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 85.6mm SKU: 25302522](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-25-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-85-6mm-sku-25302522/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 22 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 76.0mm SKU: 25302235](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-22-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-76-0mm-sku-25302235/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 22 teeth bore 30H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 76.0mm SKU: 25302230](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-22-teeth-bore-30h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-76-0mm-sku-25302230/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 22 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 76.0mm SKU: 25302225](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-22-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-76-0mm-sku-25302225/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302035/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 32H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302032](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-32h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302032/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 30H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302030](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-30h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302030/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 25H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302025](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-25h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302025/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 3 20 teeth bore 22H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 69.7mm SKU: 25302022](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-3-20-teeth-bore-22h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-69-7mm-sku-25302022/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Precision spur gear made of steel 16MnCr5 module 2 40 teeth bore 35H6 hardened and grounded helical tooth 19°31'42" left handed outside diameter 88.9mm SKU: 25104035](https://maedler.in/product/precision-spur-gear-made-of-steel-16mncr5-module-2-40-teeth-bore-35h6-hardened-and-grounded-helical-tooth-193142-left-handed-outside-diameter-88-9mm-sku-25104035/): Material: Steel 16MnCr5, case hardened approx. 60 HRC. Teeth, bores and faces ground. Helical tooth system, left hand 19° 31' 42''. Tooth quality 7e25. Keyways in accordance with DIN 6885/1, tolerance P9. Note: These gears are designed to be used in combination with our helical-toothed right-handed gear racks. If this gear is used to drive a mating gear instead, this mating gear must have the same lead angle and the opposite tooth direction (right hand). - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182524](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182522](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182520](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182519](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182518](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182518/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182516](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182516/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182430](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182425](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182424](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182424/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182422](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182422/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182420](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182419](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182418](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 24 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182416](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-24-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182325](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182324](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182322](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182320](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182319](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182318](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182318/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182316](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182316/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 23 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182315](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-23-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182315/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182225](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182224](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182222](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182220](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182219](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182218](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182218/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182216](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182216/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 22 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182215](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-22-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182215/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182125](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182124](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182122](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182122/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182120](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182119](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182118](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182118/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182116](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182116/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 21 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182115](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-21-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182115/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182025](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182024](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182022](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182022/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182020](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182019](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182018](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182018/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182016](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182016/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182015](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182015/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182014](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182014/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 20 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182012](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-20-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182012/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181925](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181925/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181924](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181924/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181922](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181922/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181920](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181920/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181919](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181919/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181918](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181918/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181916](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181916/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181915](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181915/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181914](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181914/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 19 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181912](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-19-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181912/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181825](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181825/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181824](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181824/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181822](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181822/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181820](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181820/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181819](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181819/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181818](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181818/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181816](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181816/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181815](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181815/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181814](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181814/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 18 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181812](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-18-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181812/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181725](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181725/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181724](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181724/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181722](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181722/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181720](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181720/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181719](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181719/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181718](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181718/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181716](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181716/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181715](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181715/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181714](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181714/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 17 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181712](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-17-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181712/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181625](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181625/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181624](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181624/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181622](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181622/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181620](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181620/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181619](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181619/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181618](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181618/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181616](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181616/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181615](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181615/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181614](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181614/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 16 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181612](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-16-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181612/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181525](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181524](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181522](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181520](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181519](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181518](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181518/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181516](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181516/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181515](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181515/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181514](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181514/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 15 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181512](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-15-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181512/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181419](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10181418](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-14-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10181418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Parallel pin DIN 7979 hardened steel diameter 20m6 length 45mm internal thread M10 SKU: 61852045](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-20m6-length-45mm-internal-thread-m10-sku-61852045/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 120mm internal thread M8 SKU: 61851698](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-120mm-internal-thread-m8-sku-61851698/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 100mm internal thread M8 SKU: 61851695](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-100mm-internal-thread-m8-sku-61851695/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 90mm internal thread M8 SKU: 61851690](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-90mm-internal-thread-m8-sku-61851690/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 80mm internal thread M8 SKU: 61851680](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-80mm-internal-thread-m8-sku-61851680/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 70mm internal thread M8 SKU: 61851670](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-70mm-internal-thread-m8-sku-61851670/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 60mm internal thread M8 SKU: 61851660](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-60mm-internal-thread-m8-sku-61851660/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 55mm internal thread M8 SKU: 61851655](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-55mm-internal-thread-m8-sku-61851655/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 50mm internal thread M8 SKU: 61851650](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-50mm-internal-thread-m8-sku-61851650/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 45mm internal thread M8 SKU: 61851645](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-45mm-internal-thread-m8-sku-61851645/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 16m6 length 40mm internal thread M8 SKU: 61851640](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-16m6-length-40mm-internal-thread-m8-sku-61851640/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 120mm internal thread M8 SKU: 61851498](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-120mm-internal-thread-m8-sku-61851498/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 100mm internal thread M8 SKU: 61851495](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-100mm-internal-thread-m8-sku-61851495/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 90mm internal thread M8 SKU: 61851490](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-90mm-internal-thread-m8-sku-61851490/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 80mm internal thread M8 SKU: 61851480](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-80mm-internal-thread-m8-sku-61851480/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 70mm internal thread M8 SKU: 61851470](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-70mm-internal-thread-m8-sku-61851470/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 60mm internal thread M8 SKU: 61851460](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-60mm-internal-thread-m8-sku-61851460/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 55mm internal thread M8 SKU: 61851455](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-55mm-internal-thread-m8-sku-61851455/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 50mm internal thread M8 SKU: 61851450](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-50mm-internal-thread-m8-sku-61851450/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 45mm internal thread M8 SKU: 61851445](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-45mm-internal-thread-m8-sku-61851445/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 40mm internal thread M8 SKU: 61851440](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-40mm-internal-thread-m8-sku-61851440/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 36mm internal thread M8 SKU: 61851436](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-36mm-internal-thread-m8-sku-61851436/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 14m6 length 32mm internal thread M8 SKU: 61851432](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-14m6-length-32mm-internal-thread-m8-sku-61851432/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 120mm internal thread M6 SKU: 61851298](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-120mm-internal-thread-m6-sku-61851298/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 100mm internal thread M6 SKU: 61851295](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-100mm-internal-thread-m6-sku-61851295/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 90mm internal thread M6 SKU: 61851290](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-90mm-internal-thread-m6-sku-61851290/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 80mm internal thread M6 SKU: 61851280](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-80mm-internal-thread-m6-sku-61851280/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 70mm internal thread M6 SKU: 61851270](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-70mm-internal-thread-m6-sku-61851270/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 60mm internal thread M6 SKU: 61851260](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-60mm-internal-thread-m6-sku-61851260/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 55mm internal thread M6 SKU: 61851255](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-55mm-internal-thread-m6-sku-61851255/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 50mm internal thread M6 SKU: 61851250](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-50mm-internal-thread-m6-sku-61851250/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 45mm internal thread M6 SKU: 61851245](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-45mm-internal-thread-m6-sku-61851245/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 40mm internal thread M6 SKU: 61851240](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-40mm-internal-thread-m6-sku-61851240/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 36mm internal thread M6 SKU: 61851236](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-36mm-internal-thread-m6-sku-61851236/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 12m6 length 32mm internal thread M6 SKU: 61851232](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-12m6-length-32mm-internal-thread-m6-sku-61851232/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 100mm internal thread M6 SKU: 61851095](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-100mm-internal-thread-m6-sku-61851095/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 90mm internal thread M6 SKU: 61851090](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-90mm-internal-thread-m6-sku-61851090/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 80mm internal thread M6 SKU: 61851080](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-80mm-internal-thread-m6-sku-61851080/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 70mm internal thread M6 SKU: 61851070](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-70mm-internal-thread-m6-sku-61851070/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 60mm internal thread M6 SKU: 61851060](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-60mm-internal-thread-m6-sku-61851060/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 55mm internal thread M6 SKU: 61851055](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-55mm-internal-thread-m6-sku-61851055/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 50mm internal thread M6 SKU: 61851050](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-50mm-internal-thread-m6-sku-61851050/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 45mm internal thread M6 SKU: 61851045](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-45mm-internal-thread-m6-sku-61851045/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 40mm internal thread M6 SKU: 61851040](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-40mm-internal-thread-m6-sku-61851040/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 36mm internal thread M6 SKU: 61851036](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-36mm-internal-thread-m6-sku-61851036/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 32mm internal thread M6 SKU: 61851032](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-32mm-internal-thread-m6-sku-61851032/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 28mm internal thread M6 SKU: 61851028](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-28mm-internal-thread-m6-sku-61851028/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 24mm internal thread M6 SKU: 61851024](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-24mm-internal-thread-m6-sku-61851024/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 10m6 length 20mm internal thread M6 SKU: 61851020](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-10m6-length-20mm-internal-thread-m6-sku-61851020/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 100mm internal thread M5 SKU: 61850895](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-100mm-internal-thread-m5-sku-61850895/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 90mm internal thread M5 SKU: 61850890](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-90mm-internal-thread-m5-sku-61850890/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 80mm internal thread M5 SKU: 61850880](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-80mm-internal-thread-m5-sku-61850880/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 70mm internal thread M5 SKU: 61850870](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-70mm-internal-thread-m5-sku-61850870/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 60mm internal thread M5 SKU: 61850860](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-60mm-internal-thread-m5-sku-61850860/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 55mm internal thread M5 SKU: 61850855](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-55mm-internal-thread-m5-sku-61850855/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 50mm internal thread M5 SKU: 61850850](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-50mm-internal-thread-m5-sku-61850850/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 45mm internal thread M5 SKU: 61850845](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-45mm-internal-thread-m5-sku-61850845/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 40mm internal thread M5 SKU: 61850840](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-40mm-internal-thread-m5-sku-61850840/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 36mm internal thread M5 SKU: 61850836](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-36mm-internal-thread-m5-sku-61850836/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 32mm internal thread M5 SKU: 61850832](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-32mm-internal-thread-m5-sku-61850832/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 28mm internal thread M5 SKU: 61850828](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-28mm-internal-thread-m5-sku-61850828/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 24mm internal thread M5 SKU: 61850824](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-24mm-internal-thread-m5-sku-61850824/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 8m6 length 20mm internal thread M5 SKU: 61850820](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-8m6-length-20mm-internal-thread-m5-sku-61850820/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 60mm internal thread M4 SKU: 61850660](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-60mm-internal-thread-m4-sku-61850660/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 55mm internal thread M4 SKU: 61850655](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-55mm-internal-thread-m4-sku-61850655/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 50mm internal thread M4 SKU: 61850650](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-50mm-internal-thread-m4-sku-61850650/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 45mm internal thread M4 SKU: 61850645](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-45mm-internal-thread-m4-sku-61850645/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 40mm internal thread M4 SKU: 61850640](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-40mm-internal-thread-m4-sku-61850640/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 36mm internal thread M4 SKU: 61850636](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-36mm-internal-thread-m4-sku-61850636/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 32mm internal thread M4 SKU: 61850632](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-32mm-internal-thread-m4-sku-61850632/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 28mm internal thread M4 SKU: 61850628](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-28mm-internal-thread-m4-sku-61850628/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 24mm internal thread M4 SKU: 61850624](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-24mm-internal-thread-m4-sku-61850624/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 20mm internal thread M4 SKU: 61850620](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-20mm-internal-thread-m4-sku-61850620/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 18mm internal thread M4 SKU: 61850618](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-18mm-internal-thread-m4-sku-61850618/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 6m6 length 16mm internal thread M4 SKU: 61850616](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-6m6-length-16mm-internal-thread-m4-sku-61850616/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 5m6 length 45mm internal thread M3 SKU: 61850545](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-5m6-length-45mm-internal-thread-m3-sku-61850545/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 5m6 length 40mm internal thread M3 SKU: 61850540](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-5m6-length-40mm-internal-thread-m3-sku-61850540/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 5m6 length 36mm internal thread M3 SKU: 61850536](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-5m6-length-36mm-internal-thread-m3-sku-61850536/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 5m6 length 32mm internal thread M3 SKU: 61850532](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-5m6-length-32mm-internal-thread-m3-sku-61850532/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 5m6 length 28mm internal thread M3 SKU: 61850528](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-5m6-length-28mm-internal-thread-m3-sku-61850528/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 5m6 length 24mm internal thread M3 SKU: 61850524](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-5m6-length-24mm-internal-thread-m3-sku-61850524/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 5m6 length 20mm internal thread M3 SKU: 61850520](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-5m6-length-20mm-internal-thread-m3-sku-61850520/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 5m6 length 16mm internal thread M3 SKU: 61850516](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-5m6-length-16mm-internal-thread-m3-sku-61850516/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 4m6 length 24mm internal thread M2 SKU: 61850424](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-4m6-length-24mm-internal-thread-m2-sku-61850424/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 4m6 length 20mm internal thread M2 SKU: 61850420](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-4m6-length-20mm-internal-thread-m2-sku-61850420/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 4m6 length 18mm internal thread M2 SKU: 61850418](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-4m6-length-18mm-internal-thread-m2-sku-61850418/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 4m6 length 16mm internal thread M2 SKU: 61850416](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-4m6-length-16mm-internal-thread-m2-sku-61850416/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 4m6 length 14mm internal thread M2 SKU: 61850414](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-4m6-length-14mm-internal-thread-m2-sku-61850414/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 4m6 length 12mm internal thread M2 SKU: 61850412](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-4m6-length-12mm-internal-thread-m2-sku-61850412/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 4m6 length 10mm internal thread M2 SKU: 61850410](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-4m6-length-10mm-internal-thread-m2-sku-61850410/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2.5m6 length 24mm SKU: 61842524](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2-5m6-length-24mm-sku-61842524/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2.5m6 length 20mm SKU: 61842520](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2-5m6-length-20mm-sku-61842520/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2.5m6 length 18mm SKU: 61842518](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2-5m6-length-18mm-sku-61842518/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2.5m6 length 16mm SKU: 61842516](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2-5m6-length-16mm-sku-61842516/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2.5m6 length 14mm SKU: 61842514](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2-5m6-length-14mm-sku-61842514/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2.5m6 length 12mm SKU: 61842512](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2-5m6-length-12mm-sku-61842512/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2.5m6 length 10mm SKU: 61842510](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2-5m6-length-10mm-sku-61842510/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2.5m6 length 8mm SKU: 61842508](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2-5m6-length-8mm-sku-61842508/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 2.5m6 length 6mm SKU: 61842506](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-2-5m6-length-6mm-sku-61842506/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Parallel pin DIN 6325 hardened steel diameter 20m6 length 100mm SKU: 61842095](https://maedler.in/product/parallel-pin-din-6325-hardened-steel-diameter-20m6-length-100mm-sku-61842095/): Material: Steel, hardened and ground.Parallel Pins with convex flat areas, with chamfer on one side, similar to DIN EN ISO 8734.Other types and versions on request. - [Bevel gear made of brass Ms58 module 1 30 teeth i=2:1 milled SKU: 35055700](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-30-teeth-i21-milled-sku-35055700/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 15 teeth i=2:1 milled SKU: 35055600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-15-teeth-i21-milled-sku-35055600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 30 teeth i=1.5:1 milled SKU: 35055300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-30-teeth-i1-51-milled-sku-35055300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 20 teeth i=1.5:1 milled SKU: 35055200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-20-teeth-i1-51-milled-sku-35055200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 60 teeth i=1:1 milled SKU: 35053500](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-60-teeth-i11-milled-sku-35053500/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 50 teeth i=1:1 milled SKU: 35053200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-50-teeth-i11-milled-sku-35053200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 40 teeth i=1:1 milled SKU: 35052600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-40-teeth-i11-milled-sku-35052600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 36 teeth i=1:1 milled SKU: 35052300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-36-teeth-i11-milled-sku-35052300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 30 teeth i=1:1 milled SKU: 35052000](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-30-teeth-i11-milled-sku-35052000/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 25 teeth i=1:1 milled SKU: 35051600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-25-teeth-i11-milled-sku-35051600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 20 teeth i=1:1 milled SKU: 35051100](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-20-teeth-i11-milled-sku-35051100/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 16 teeth i=1:1 milled SKU: 35050700](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-16-teeth-i11-milled-sku-35050700/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 12 teeth i=1:1 milled SKU: 35050300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-12-teeth-i11-milled-sku-35050300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 45 teeth i=3:1 milled SKU: 35027700](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-45-teeth-i31-milled-sku-35027700/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 15 teeth i=3:1 milled SKU: 35027600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-15-teeth-i31-milled-sku-35027600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 50 teeth i=2.5:1 milled SKU: 35027300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-50-teeth-i2-51-milled-sku-35027300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 20 teeth i= 2.5:1 milled SKU: 35027200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-20-teeth-i-2-51-milled-sku-35027200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 40 teeth i=2:1 milled SKU: 35026100](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-40-teeth-i21-milled-sku-35026100/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 20 teeth i=2:1 milled SKU: 35026000](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-20-teeth-i21-milled-sku-35026000/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 30 teeth i=1.5:1 milled SKU: 35025300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-30-teeth-i1-51-milled-sku-35025300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 20 teeth i=1.5:1 milled SKU: 35025200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-20-teeth-i1-51-milled-sku-35025200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 50 teeth i=1:1 milled SKU: 35023200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-50-teeth-i11-milled-sku-35023200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 40 teeth i=1:1 milled SKU: 35022600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-40-teeth-i11-milled-sku-35022600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 36 teeth i=1:1 milled SKU: 35022300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-36-teeth-i11-milled-sku-35022300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 30 teeth i=1:1 milled SKU: 35022000](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-30-teeth-i11-milled-sku-35022000/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 24 teeth i=1:1 milled SKU: 35021500](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-24-teeth-i11-milled-sku-35021500/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 20 teeth i=1:1 milled SKU: 35021100](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-20-teeth-i11-milled-sku-35021100/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 0.5 15 teeth i=1:1 milled SKU: 35020600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-0-5-15-teeth-i11-milled-sku-35020600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [MAEDLER tapered roller bearing 32010X inner-ø 50mm outer-ø 80mm height 20mm SKU: 32010X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32010x-inner-o-50mm-outer-o-80mm-height-20mm-sku-32010x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32009X inner-ø 45mm outer-ø 75mm height 20mm SKU: 32009X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32009x-inner-o-45mm-outer-o-75mm-height-20mm-sku-32009x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32008X inner-ø 40mm outer-ø 68mm height 19mm SKU: 32008X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32008x-inner-o-40mm-outer-o-68mm-height-19mm-sku-32008x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32007X inner-ø 35mm outer-ø 62mm height 18mm SKU: 32007X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32007x-inner-o-35mm-outer-o-62mm-height-18mm-sku-32007x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32006X inner-ø 30mm outer-ø 55mm height 17mm SKU: 32006X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32006x-inner-o-30mm-outer-o-55mm-height-17mm-sku-32006x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32005X inner-ø 25mm outer-ø 47mm height 15mm SKU: 32005X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32005x-inner-o-25mm-outer-o-47mm-height-15mm-sku-32005x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 32004X inner-ø 20mm outer-ø 42mm height 15mm SKU: 32004X-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-32004x-inner-o-20mm-outer-o-42mm-height-15mm-sku-32004x-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30310 inner-ø 50mm outer-ø 110mm height 29,25mm SKU: 30310-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30310-inner-o-50mm-outer-o-110mm-height-2925mm-sku-30310-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30309 inner-ø 45mm outer-ø 100mm height 27,25mm SKU: 30309-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30309-inner-o-45mm-outer-o-100mm-height-2725mm-sku-30309-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30308 inner-ø 40mm outer-ø 90mm height 25,25mm SKU: 30308-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30308-inner-o-40mm-outer-o-90mm-height-2525mm-sku-30308-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30307 inner-ø 35mm outer-ø 80mm height 22,75mm SKU: 30307-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30307-inner-o-35mm-outer-o-80mm-height-2275mm-sku-30307-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30306 inner-ø 30mm outer-ø 72mm height 20,75mm SKU: 30306-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30306-inner-o-30mm-outer-o-72mm-height-2075mm-sku-30306-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30305 inner-ø 25mm outer-ø 62mm height 18,25mm SKU: 30305-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30305-inner-o-25mm-outer-o-62mm-height-1825mm-sku-30305-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30304 inner-ø 20mm outer-ø 52mm height 16,25mm SKU: 30304-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30304-inner-o-20mm-outer-o-52mm-height-1625mm-sku-30304-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30303 inner-ø 17mm outer-ø 47mm height 15,25mm SKU: 30303-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30303-inner-o-17mm-outer-o-47mm-height-1525mm-sku-30303-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30302 inner-ø 15mm outer-ø 42mm height 14,25mm SKU: 30302-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30302-inner-o-15mm-outer-o-42mm-height-1425mm-sku-30302-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30210 inner-ø 50mm outer-ø 90mm height 21,75mm SKU: 30210-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30210-inner-o-50mm-outer-o-90mm-height-2175mm-sku-30210-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30209 inner-ø 45mm outer-ø 85mm height 20,75mm SKU: 30209-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30209-inner-o-45mm-outer-o-85mm-height-2075mm-sku-30209-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30208 inner-ø 40mm outer-ø 80mm height 19,75mm SKU: 30208-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30208-inner-o-40mm-outer-o-80mm-height-1975mm-sku-30208-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30207 inner-ø 35mm outer-ø 72mm height 18,25mm SKU: 30207-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30207-inner-o-35mm-outer-o-72mm-height-1825mm-sku-30207-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30206 inner-ø 30mm outer-ø 62mm height 17,25mm SKU: 30206-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30206-inner-o-30mm-outer-o-62mm-height-1725mm-sku-30206-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30205 inner-ø 25mm outer-ø 52mm height 16,25mm SKU: 30205-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30205-inner-o-25mm-outer-o-52mm-height-1625mm-sku-30205-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30204 inner-ø 20mm outer-ø 47mm height 15,25mm SKU: 30204-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30204-inner-o-20mm-outer-o-47mm-height-1525mm-sku-30204-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [MAEDLER tapered roller bearing 30203 inner-ø 17mm outer-ø 40mm height 13,25mm SKU: 30203-MAE](https://maedler.in/product/maedler-tapered-roller-bearing-30203-inner-o-17mm-outer-o-40mm-height-1325mm-sku-30203-mae/): Material: Bearing steel.Standard tapered roller bearings in high quality.- For common axial and radial load.- Usable for low speed to middle speed.- Easy to mount (the outer ring is loose).Temperature range: -30°C to +90°C (for short time up to +110°C).Other versions or other bearing types on request. - [Gear rack made of POM module 3 tooth width 25mm height 25mm length 1500mm SKU: 29860700](https://maedler.in/product/gear-rack-made-of-pom-module-3-tooth-width-25mm-height-25mm-length-1500mm-sku-29860700/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 3 tooth width 25mm height 25mm length 1000mm SKU: 29860500](https://maedler.in/product/gear-rack-made-of-pom-module-3-tooth-width-25mm-height-25mm-length-1000mm-sku-29860500/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 3 tooth width 25mm height 25mm length 500mm SKU: 29860300](https://maedler.in/product/gear-rack-made-of-pom-module-3-tooth-width-25mm-height-25mm-length-500mm-sku-29860300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 3 tooth width 30mm height 30mm length 1000mm SKU: 29811705](https://maedler.in/product/gear-rack-made-of-pom-black-module-3-tooth-width-30mm-height-30mm-length-1000mm-sku-29811705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 3 tooth width 30mm height 30mm length 500mm SKU: 29811703](https://maedler.in/product/gear-rack-made-of-pom-black-module-3-tooth-width-30mm-height-30mm-length-500mm-sku-29811703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 3 tooth width 30mm height 30mm length 250mm SKU: 29811701](https://maedler.in/product/gear-rack-made-of-pom-black-module-3-tooth-width-30mm-height-30mm-length-250mm-sku-29811701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 3 tooth width 30mm height 30mm length 1000mm SKU: 29811605](https://maedler.in/product/gear-rack-made-of-pom-white-module-3-tooth-width-30mm-height-30mm-length-1000mm-sku-29811605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 3 tooth width 30mm height 30mm length 500mm SKU: 29811603](https://maedler.in/product/gear-rack-made-of-pom-white-module-3-tooth-width-30mm-height-30mm-length-500mm-sku-29811603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 3 tooth width 30mm height 30mm length 250mm SKU: 29811601](https://maedler.in/product/gear-rack-made-of-pom-white-module-3-tooth-width-30mm-height-30mm-length-250mm-sku-29811601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2.5 tooth width 20mm height 20mm length 1500mm SKU: 29760700](https://maedler.in/product/gear-rack-made-of-pom-module-2-5-tooth-width-20mm-height-20mm-length-1500mm-sku-29760700/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2.5 tooth width 20mm height 20mm length 1000mm SKU: 29760500](https://maedler.in/product/gear-rack-made-of-pom-module-2-5-tooth-width-20mm-height-20mm-length-1000mm-sku-29760500/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2.5 tooth width 20mm height 20mm length 500mm SKU: 29760300](https://maedler.in/product/gear-rack-made-of-pom-module-2-5-tooth-width-20mm-height-20mm-length-500mm-sku-29760300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 2.5 tooth width 25mm height 25mm length 1000mm SKU: 29711705](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-5-tooth-width-25mm-height-25mm-length-1000mm-sku-29711705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 2.5 tooth width 25mm height 25mm length 500mm SKU: 29711703](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-5-tooth-width-25mm-height-25mm-length-500mm-sku-29711703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 2.5 tooth width 25mm height 25mm length 250mm SKU: 29711701](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-5-tooth-width-25mm-height-25mm-length-250mm-sku-29711701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 2.5 tooth width 25mm height 25mm length 1000mm SKU: 29711605](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-5-tooth-width-25mm-height-25mm-length-1000mm-sku-29711605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 2.5 tooth width 25mm height 25mm length 500mm SKU: 29711603](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-5-tooth-width-25mm-height-25mm-length-500mm-sku-29711603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 2.5 tooth width 25mm height 25mm length 250mm SKU: 29711601](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-5-tooth-width-25mm-height-25mm-length-250mm-sku-29711601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2 tooth width 16mm height 16mm length 1500mm SKU: 29660700](https://maedler.in/product/gear-rack-made-of-pom-module-2-tooth-width-16mm-height-16mm-length-1500mm-sku-29660700/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2 tooth width 16mm height 16mm length 1000mm SKU: 29660500](https://maedler.in/product/gear-rack-made-of-pom-module-2-tooth-width-16mm-height-16mm-length-1000mm-sku-29660500/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 2 tooth width 16mm height 16mm length 500mm SKU: 29660300](https://maedler.in/product/gear-rack-made-of-pom-module-2-tooth-width-16mm-height-16mm-length-500mm-sku-29660300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 2 tooth width 20mm height 20mm length 1000mm SKU: 29611705](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-tooth-width-20mm-height-20mm-length-1000mm-sku-29611705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 2 tooth width 20mm height 20mm length 500mm SKU: 29611703](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-tooth-width-20mm-height-20mm-length-500mm-sku-29611703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 2 tooth width 20mm height 20mm length 250mm SKU: 29611701](https://maedler.in/product/gear-rack-made-of-pom-black-module-2-tooth-width-20mm-height-20mm-length-250mm-sku-29611701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 2 tooth width 20mm height 20mm length 1000mm SKU: 29611605](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-tooth-width-20mm-height-20mm-length-1000mm-sku-29611605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 2 tooth width 20mm height 20mm length 500mm SKU: 29611603](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-tooth-width-20mm-height-20mm-length-500mm-sku-29611603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 2 tooth width 20mm height 20mm length 250mm SKU: 29611601](https://maedler.in/product/gear-rack-made-of-pom-white-module-2-tooth-width-20mm-height-20mm-length-250mm-sku-29611601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.5 tooth width 15mm height 15mm length 1000mm SKU: 29560500](https://maedler.in/product/gear-rack-made-of-pom-module-1-5-tooth-width-15mm-height-15mm-length-1000mm-sku-29560500/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.5 tooth width 15mm height 15mm length 500mm SKU: 29560300](https://maedler.in/product/gear-rack-made-of-pom-module-1-5-tooth-width-15mm-height-15mm-length-500mm-sku-29560300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.5 tooth width 15mm height 15mm length 250mm SKU: 29560100](https://maedler.in/product/gear-rack-made-of-pom-module-1-5-tooth-width-15mm-height-15mm-length-250mm-sku-29560100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 1.5 tooth width 17mm height 17mm length 1000mm SKU: 29511705](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-5-tooth-width-17mm-height-17mm-length-1000mm-sku-29511705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 1.5 tooth width 17mm height 17mm length 500mm SKU: 29511703](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-5-tooth-width-17mm-height-17mm-length-500mm-sku-29511703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 1.5 tooth width 17mm height 17mm length 250mm SKU: 29511701](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-5-tooth-width-17mm-height-17mm-length-250mm-sku-29511701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 1.5 tooth width 17mm height 17mm length 1000mm SKU: 29511605](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-5-tooth-width-17mm-height-17mm-length-1000mm-sku-29511605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 1.5 tooth width 17mm height 17mm length 500mm SKU: 29511603](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-5-tooth-width-17mm-height-17mm-length-500mm-sku-29511603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 1.5 tooth width 17mm height 17mm length 250mm SKU: 29511601](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-5-tooth-width-17mm-height-17mm-length-250mm-sku-29511601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.25 tooth width 10mm height 10mm length 500mm SKU: 29460300](https://maedler.in/product/gear-rack-made-of-pom-module-1-25-tooth-width-10mm-height-10mm-length-500mm-sku-29460300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1.25 tooth width 10mm height 10mm length 250mm SKU: 29460100](https://maedler.in/product/gear-rack-made-of-pom-module-1-25-tooth-width-10mm-height-10mm-length-250mm-sku-29460100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1 tooth width 10mm height 10mm length 500mm SKU: 29360300](https://maedler.in/product/gear-rack-made-of-pom-module-1-tooth-width-10mm-height-10mm-length-500mm-sku-29360300/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 1 tooth width 10mm height 10mm length 250mm SKU: 29360100](https://maedler.in/product/gear-rack-made-of-pom-module-1-tooth-width-10mm-height-10mm-length-250mm-sku-29360100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM black module 1 tooth width 15mm height 15mm length 1000mm SKU: 29311705](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-tooth-width-15mm-height-15mm-length-1000mm-sku-29311705/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 1 tooth width 15mm height 15mm length 500mm SKU: 29311703](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-tooth-width-15mm-height-15mm-length-500mm-sku-29311703/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM black module 1 tooth width 15mm height 15mm length 250mm SKU: 29311701](https://maedler.in/product/gear-rack-made-of-pom-black-module-1-tooth-width-15mm-height-15mm-length-250mm-sku-29311701/): Material: POM, black. Milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. - [Gear rack made of POM white module 1 tooth width 15mm height 15mm length 1000mm SKU: 29311605](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-tooth-width-15mm-height-15mm-length-1000mm-sku-29311605/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 1 tooth width 15mm height 15mm length 500mm SKU: 29311603](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-tooth-width-15mm-height-15mm-length-500mm-sku-29311603/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM white module 1 tooth width 15mm height 15mm length 250mm SKU: 29311601](https://maedler.in/product/gear-rack-made-of-pom-white-module-1-tooth-width-15mm-height-15mm-length-250mm-sku-29311601/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 0.7 tooth width 5mm height 7mm length 250mm SKU: 29260100](https://maedler.in/product/gear-rack-made-of-pom-module-0-7-tooth-width-5mm-height-7mm-length-250mm-sku-29260100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Gear rack made of POM module 0.5 tooth width 4mm +/-0,2mm height 6mm length 250mm SKU: 29160100](https://maedler.in/product/gear-rack-made-of-pom-module-0-5-tooth-width-4mm-02mm-height-6mm-length-250mm-sku-29160100/): Material: POM, white (nature), milled teeth. Because of the material used, plastic gear racks are not straightened. Either slim version or wide version (from Module 1 to Module 3). Straight teeth. Pressure angle 20°. From Module 2, except for nominal length 500 mm, cut for continuous linking. * Length = Nominal length. The real length is roughly one multiple of the pitch. ** b=4mm +/-0,2mm. - [Plate wheel KRL without hub 081 1/2x1/8" 20 teeth material steel SKU: 10222000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-20-teeth-material-steel-sku-10222000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 19 teeth material steel SKU: 10221900](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-19-teeth-material-steel-sku-10221900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 18 teeth material steel SKU: 10221800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-18-teeth-material-steel-sku-10221800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 17 teeth material steel SKU: 10221700](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-17-teeth-material-steel-sku-10221700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 16 teeth material steel SKU: 10221600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-16-teeth-material-steel-sku-10221600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 15 teeth material steel SKU: 10221500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-15-teeth-material-steel-sku-10221500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 14 teeth material steel SKU: 10221400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-14-teeth-material-steel-sku-10221400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 13 teeth material steel SKU: 10221300](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-13-teeth-material-steel-sku-10221300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 12 teeth material steel SKU: 10221200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-12-teeth-material-steel-sku-10221200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 11 teeth material steel SKU: 10221100](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-11-teeth-material-steel-sku-10221100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 10 teeth material steel SKU: 10221000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-10-teeth-material-steel-sku-10221000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 9 teeth material steel SKU: 10220900](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-9-teeth-material-steel-sku-10220900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 8 teeth material steel SKU: 10220800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-8-teeth-material-steel-sku-10220800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 40 teeth material steel SKU: 10214000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-40-teeth-material-steel-sku-10214000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 39 teeth material steel SKU: 10213900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-39-teeth-material-steel-sku-10213900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 38 teeth material steel SKU: 10213800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-38-teeth-material-steel-sku-10213800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 37 teeth material steel SKU: 10213700](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-37-teeth-material-steel-sku-10213700/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 36 teeth material steel SKU: 10213600](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-36-teeth-material-steel-sku-10213600/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 35 teeth material steel SKU: 10213500](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-35-teeth-material-steel-sku-10213500/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 34 teeth material steel SKU: 10213400](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-34-teeth-material-steel-sku-10213400/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 33 teeth material steel SKU: 10213300](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-33-teeth-material-steel-sku-10213300/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 32 teeth material steel SKU: 10213200](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-32-teeth-material-steel-sku-10213200/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 31 teeth material steel SKU: 10213100](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-31-teeth-material-steel-sku-10213100/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 30 teeth material steel SKU: 10213000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-30-teeth-material-steel-sku-10213000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 29 teeth material steel SKU: 10212900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-29-teeth-material-steel-sku-10212900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 28 teeth material steel SKU: 10212800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-28-teeth-material-steel-sku-10212800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 27 teeth material steel SKU: 10212700](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-27-teeth-material-steel-sku-10212700/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 26 teeth material steel SKU: 10212600](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-26-teeth-material-steel-sku-10212600/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 25 teeth material steel SKU: 10212500](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-25-teeth-material-steel-sku-10212500/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 24 teeth material steel SKU: 10212400](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-24-teeth-material-steel-sku-10212400/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 23 teeth material steel SKU: 10212300](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-23-teeth-material-steel-sku-10212300/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 22 teeth material steel SKU: 10212200](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-22-teeth-material-steel-sku-10212200/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 21 teeth material steel SKU: 10212100](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-21-teeth-material-steel-sku-10212100/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 20 teeth material steel SKU: 10212000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-20-teeth-material-steel-sku-10212000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 19 teeth material steel SKU: 10211900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-19-teeth-material-steel-sku-10211900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 18 teeth material steel SKU: 10211800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-18-teeth-material-steel-sku-10211800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 17 teeth material steel SKU: 10211700](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-17-teeth-material-steel-sku-10211700/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 16 teeth material steel SKU: 10211600](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-16-teeth-material-steel-sku-10211600/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 15 teeth material steel SKU: 10211500](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-15-teeth-material-steel-sku-10211500/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 14 teeth material steel SKU: 10211400](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-14-teeth-material-steel-sku-10211400/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 13 teeth material steel SKU: 10211300](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-13-teeth-material-steel-sku-10211300/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 12 teeth material steel SKU: 10211200](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-12-teeth-material-steel-sku-10211200/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 11 teeth material steel SKU: 10211100](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-11-teeth-material-steel-sku-10211100/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 10 teeth material steel SKU: 10211000](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-10-teeth-material-steel-sku-10211000/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 9 teeth material steel SKU: 10210900](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-9-teeth-material-steel-sku-10210900/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 081 1/2x1/8" 8 teeth material steel SKU: 10210800](https://maedler.in/product/sprocket-krs-with-hub-081-1-2x1-8-8-teeth-material-steel-sku-10210800/): Material: Steel C45, not hardened. * Sprockets from 31 teeth and more are reinforced (H = 4 mm, see drawing). Pre-bored. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/8x7/32" 40 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199140](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-8x7-32-40-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199140/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/8x7/32" 38 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199138](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-8x7-32-38-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199138/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/8x7/32" 32 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199132](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-8x7-32-32-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199132/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199130](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 28 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199128](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-28-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199128/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199125](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199124](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199123](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199122](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199121](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199120](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199119](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199118](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199117](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199116](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199115](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199114](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199113](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRR with hub 06 B-1 3/8x7/32" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10199112](https://maedler.in/product/sprocket-krr-with-hub-06-b-1-3-8x7-32-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10199112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 40 teeth material steel teeth induction hardened SKU: 10188140](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-40-teeth-material-steel-teeth-induction-hardened-sku-10188140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 38 teeth material steel teeth induction hardened SKU: 10188138](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-38-teeth-material-steel-teeth-induction-hardened-sku-10188138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 36 teeth material steel teeth induction hardened SKU: 10188136](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-36-teeth-material-steel-teeth-induction-hardened-sku-10188136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 35 teeth material steel teeth induction hardened SKU: 10188135](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-35-teeth-material-steel-teeth-induction-hardened-sku-10188135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 32 teeth material steel teeth induction hardened SKU: 10188132](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-32-teeth-material-steel-teeth-induction-hardened-sku-10188132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 30 teeth material steel teeth induction hardened SKU: 10188130](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-30-teeth-material-steel-teeth-induction-hardened-sku-10188130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 28 teeth material steel teeth induction hardened SKU: 10188128](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-28-teeth-material-steel-teeth-induction-hardened-sku-10188128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 27 teeth material steel teeth induction hardened SKU: 10188127](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-27-teeth-material-steel-teeth-induction-hardened-sku-10188127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 26 teeth material steel teeth induction hardened SKU: 10188126](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-26-teeth-material-steel-teeth-induction-hardened-sku-10188126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 25 teeth material steel teeth induction hardened SKU: 10188125](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-25-teeth-material-steel-teeth-induction-hardened-sku-10188125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 24 teeth material steel teeth induction hardened SKU: 10188124](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-24-teeth-material-steel-teeth-induction-hardened-sku-10188124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 23 teeth material steel teeth induction hardened SKU: 10188123](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-23-teeth-material-steel-teeth-induction-hardened-sku-10188123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 22 teeth material steel teeth induction hardened SKU: 10188122](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-22-teeth-material-steel-teeth-induction-hardened-sku-10188122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 21 teeth material steel teeth induction hardened SKU: 10188121](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-21-teeth-material-steel-teeth-induction-hardened-sku-10188121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 20 teeth material steel teeth induction hardened SKU: 10188120](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-20-teeth-material-steel-teeth-induction-hardened-sku-10188120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 19 teeth material steel teeth induction hardened SKU: 10188119](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-19-teeth-material-steel-teeth-induction-hardened-sku-10188119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 18 teeth material steel teeth induction hardened SKU: 10188118](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-18-teeth-material-steel-teeth-induction-hardened-sku-10188118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 17 teeth material steel teeth induction hardened SKU: 10188117](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-17-teeth-material-steel-teeth-induction-hardened-sku-10188117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 16 teeth material steel teeth induction hardened SKU: 10188116](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-16-teeth-material-steel-teeth-induction-hardened-sku-10188116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 15 teeth material steel teeth induction hardened SKU: 10188115](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-15-teeth-material-steel-teeth-induction-hardened-sku-10188115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 14 teeth material steel teeth induction hardened SKU: 10188114](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-14-teeth-material-steel-teeth-induction-hardened-sku-10188114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 13 teeth material steel teeth induction hardened SKU: 10188113](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-13-teeth-material-steel-teeth-induction-hardened-sku-10188113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 12 teeth material steel teeth induction hardened SKU: 10188112](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-12-teeth-material-steel-teeth-induction-hardened-sku-10188112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 11 teeth material steel teeth induction hardened SKU: 10188111](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-11-teeth-material-steel-teeth-induction-hardened-sku-10188111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 10 teeth material steel teeth induction hardened SKU: 10188110](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-10-teeth-material-steel-teeth-induction-hardened-sku-10188110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 9 teeth material steel teeth induction hardened SKU: 10188109](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-9-teeth-material-steel-teeth-induction-hardened-sku-10188109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRG with hub 06 B-1 3/8x7/32" 8 teeth material steel teeth induction hardened SKU: 10188108](https://maedler.in/product/sprocket-krg-with-hub-06-b-1-3-8x7-32-8-teeth-material-steel-teeth-induction-hardened-sku-10188108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183030](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183028](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183025](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183024](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183022](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183022/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 30 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10183020](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-30-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10183020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182530](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Sprocket KRF with hub 06 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10182525](https://maedler.in/product/sprocket-krf-with-hub-06-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10182525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M6 x 10mm SKU: 61900610](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m6-x-10mm-sku-61900610/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M6 x 8mm SKU: 61900608](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m6-x-8mm-sku-61900608/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M6 x 6mm SKU: 61900606](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m6-x-6mm-sku-61900606/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M5 x 25mm SKU: 61900525](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m5-x-25mm-sku-61900525/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M5 x 20mm SKU: 61900520](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m5-x-20mm-sku-61900520/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M5 x 16mm SKU: 61900516](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m5-x-16mm-sku-61900516/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M5 x 12mm SKU: 61900512](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m5-x-12mm-sku-61900512/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M5 x 10mm SKU: 61900510](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m5-x-10mm-sku-61900510/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M5 x 8mm SKU: 61900508](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m5-x-8mm-sku-61900508/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M5 x 6mm SKU: 61900506](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m5-x-6mm-sku-61900506/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M5 x 5mm SKU: 61900505](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m5-x-5mm-sku-61900505/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M4 x 20mm SKU: 61900420](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m4-x-20mm-sku-61900420/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M4 x 16mm SKU: 61900416](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m4-x-16mm-sku-61900416/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M4 x 12mm SKU: 61900412](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m4-x-12mm-sku-61900412/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M4 x 10mm SKU: 61900410](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m4-x-10mm-sku-61900410/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M4 x 8mm SKU: 61900408](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m4-x-8mm-sku-61900408/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M4 x 6mm SKU: 61900406](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m4-x-6mm-sku-61900406/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M4 x 5mm SKU: 61900405](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m4-x-5mm-sku-61900405/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M4 x 4mm SKU: 61900404](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m4-x-4mm-sku-61900404/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M3 x 8mm SKU: 61900308](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m3-x-8mm-sku-61900308/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M3 x 5mm SKU: 61900305](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m3-x-5mm-sku-61900305/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Feather key DIN 6885-1 version A 12 x 8 x 50 mm material stainless steel 1.4571 SKU: 61899200](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-50-mm-material-stainless-steel-1-4571-sku-61899200/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 12 x 8 x 45 mm material stainless steel 1.4571 SKU: 61899199](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-45-mm-material-stainless-steel-1-4571-sku-61899199/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 12 x 8 x 40 mm material stainless steel 1.4571 SKU: 61899198](https://maedler.in/product/feather-key-din-6885-1-version-a-12-x-8-x-40-mm-material-stainless-steel-1-4571-sku-61899198/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 50 mm material stainless steel 1.4571 SKU: 61899177](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-50-mm-material-stainless-steel-1-4571-sku-61899177/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 45 mm material stainless steel 1.4571 SKU: 61899176](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-45-mm-material-stainless-steel-1-4571-sku-61899176/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 40 mm material stainless steel 1.4571 SKU: 61899175](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-40-mm-material-stainless-steel-1-4571-sku-61899175/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 30 mm material stainless steel 1.4571 SKU: 61899173](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-30-mm-material-stainless-steel-1-4571-sku-61899173/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 28 mm material stainless steel 1.4571 SKU: 61899172](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-28-mm-material-stainless-steel-1-4571-sku-61899172/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 10 x 8 x 25 mm material stainless steel 1.4571 SKU: 61899171](https://maedler.in/product/feather-key-din-6885-1-version-a-10-x-8-x-25-mm-material-stainless-steel-1-4571-sku-61899171/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 50 mm material stainless steel 1.4571 SKU: 61899154](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-50-mm-material-stainless-steel-1-4571-sku-61899154/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 45 mm material stainless steel 1.4571 SKU: 61899153](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-45-mm-material-stainless-steel-1-4571-sku-61899153/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 40 mm material stainless steel 1.4571 SKU: 61899152](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-40-mm-material-stainless-steel-1-4571-sku-61899152/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 30 mm material stainless steel 1.4571 SKU: 61899150](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-30-mm-material-stainless-steel-1-4571-sku-61899150/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 28 mm material stainless steel 1.4571 SKU: 61899149](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-28-mm-material-stainless-steel-1-4571-sku-61899149/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 25 mm material stainless steel 1.4571 SKU: 61899148](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-25-mm-material-stainless-steel-1-4571-sku-61899148/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 8 x 7 x 20 mm material stainless steel 1.4571 SKU: 61899146](https://maedler.in/product/feather-key-din-6885-1-version-a-8-x-7-x-20-mm-material-stainless-steel-1-4571-sku-61899146/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 50 mm material stainless steel 1.4571 SKU: 61899130](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-50-mm-material-stainless-steel-1-4571-sku-61899130/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 45 mm material stainless steel 1.4571 SKU: 61899129](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-45-mm-material-stainless-steel-1-4571-sku-61899129/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 40 mm material stainless steel 1.4571 SKU: 61899128](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-40-mm-material-stainless-steel-1-4571-sku-61899128/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 30 mm material stainless steel 1.4571 SKU: 61899126](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-30-mm-material-stainless-steel-1-4571-sku-61899126/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 28 mm material stainless steel 1.4571 SKU: 61899125](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-28-mm-material-stainless-steel-1-4571-sku-61899125/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 25 mm material stainless steel 1.4571 SKU: 61899124](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-25-mm-material-stainless-steel-1-4571-sku-61899124/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 20 mm material stainless steel 1.4571 SKU: 61899122](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-20-mm-material-stainless-steel-1-4571-sku-61899122/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 6 x 6 x 16 mm material stainless steel 1.4571 SKU: 61899120](https://maedler.in/product/feather-key-din-6885-1-version-a-6-x-6-x-16-mm-material-stainless-steel-1-4571-sku-61899120/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 50 mm material stainless steel 1.4571 SKU: 61899107](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-50-mm-material-stainless-steel-1-4571-sku-61899107/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 45 mm material stainless steel 1.4571 SKU: 61899106](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-45-mm-material-stainless-steel-1-4571-sku-61899106/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 40 mm material stainless steel 1.4571 SKU: 61899105](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-40-mm-material-stainless-steel-1-4571-sku-61899105/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 30 mm material stainless steel 1.4571 SKU: 61899103](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-30-mm-material-stainless-steel-1-4571-sku-61899103/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 28 mm material stainless steel 1.4571 SKU: 61899102](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-28-mm-material-stainless-steel-1-4571-sku-61899102/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 25 mm material stainless steel 1.4571 SKU: 61899101](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-25-mm-material-stainless-steel-1-4571-sku-61899101/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 20 mm material stainless steel 1.4571 SKU: 61899099](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-20-mm-material-stainless-steel-1-4571-sku-61899099/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 16 mm material stainless steel 1.4571 SKU: 61899097](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-16-mm-material-stainless-steel-1-4571-sku-61899097/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 5 x 5 x 12 mm material stainless steel 1.4571 SKU: 61899094](https://maedler.in/product/feather-key-din-6885-1-version-a-5-x-5-x-12-mm-material-stainless-steel-1-4571-sku-61899094/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 30 mm material stainless steel 1.4571 SKU: 61899073](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-30-mm-material-stainless-steel-1-4571-sku-61899073/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 28 mm material stainless steel 1.4571 SKU: 61899072](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-28-mm-material-stainless-steel-1-4571-sku-61899072/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 25 mm material stainless steel 1.4571 SKU: 61899071](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-25-mm-material-stainless-steel-1-4571-sku-61899071/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 20 mm material stainless steel 1.4571 SKU: 61899069](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-20-mm-material-stainless-steel-1-4571-sku-61899069/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 16 mm material stainless steel 1.4571 SKU: 61899067](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-16-mm-material-stainless-steel-1-4571-sku-61899067/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 12 mm material stainless steel 1.4571 SKU: 61899064](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-12-mm-material-stainless-steel-1-4571-sku-61899064/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 4 x 4 x 10 mm material stainless steel 1.4571 SKU: 61899063](https://maedler.in/product/feather-key-din-6885-1-version-a-4-x-4-x-10-mm-material-stainless-steel-1-4571-sku-61899063/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 25 mm material stainless steel 1.4571 SKU: 61899040](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-25-mm-material-stainless-steel-1-4571-sku-61899040/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 20 mm material stainless steel 1.4571 SKU: 61899038](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-20-mm-material-stainless-steel-1-4571-sku-61899038/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 16 mm material stainless steel 1.4571 SKU: 61899036](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-16-mm-material-stainless-steel-1-4571-sku-61899036/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 12 mm material stainless steel 1.4571 SKU: 61899032](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-12-mm-material-stainless-steel-1-4571-sku-61899032/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 10 mm material stainless steel 1.4571 SKU: 61899031](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-10-mm-material-stainless-steel-1-4571-sku-61899031/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Feather key DIN 6885-1 version A 3 x 3 x 8 mm material stainless steel 1.4571 SKU: 61899030](https://maedler.in/product/feather-key-din-6885-1-version-a-3-x-3-x-8-mm-material-stainless-steel-1-4571-sku-61899030/): Material: Stainless steel 1.4571 (AISI 316 Ti). Version A. - [Bright key steel DIN 6880 25 x 14 x 1000 mm material C45K SKU: 61892514](https://maedler.in/product/bright-key-steel-din-6880-25-x-14-x-1000-mm-material-c45k-sku-61892514/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 20 x 12 x 1000 mm material C45K SKU: 61892012](https://maedler.in/product/bright-key-steel-din-6880-20-x-12-x-1000-mm-material-c45k-sku-61892012/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 18 x 11 x 1000 mm material C45K SKU: 61891811](https://maedler.in/product/bright-key-steel-din-6880-18-x-11-x-1000-mm-material-c45k-sku-61891811/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 16 x 10 x 1000 mm material C45K SKU: 61891610](https://maedler.in/product/bright-key-steel-din-6880-16-x-10-x-1000-mm-material-c45k-sku-61891610/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 14 x 9 x 1000 mm material C45K SKU: 61891409](https://maedler.in/product/bright-key-steel-din-6880-14-x-9-x-1000-mm-material-c45k-sku-61891409/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 12 x 12 x 1000 mm material C45K SKU: 61891212](https://maedler.in/product/bright-key-steel-din-6880-12-x-12-x-1000-mm-material-c45k-sku-61891212/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 12 x 8 x 1000 mm material C45K SKU: 61891208](https://maedler.in/product/bright-key-steel-din-6880-12-x-8-x-1000-mm-material-c45k-sku-61891208/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 10 x 10 x 1000 mm material C45K SKU: 61891010](https://maedler.in/product/bright-key-steel-din-6880-10-x-10-x-1000-mm-material-c45k-sku-61891010/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 10 x 8 x 1000 mm material C45K SKU: 61891008](https://maedler.in/product/bright-key-steel-din-6880-10-x-8-x-1000-mm-material-c45k-sku-61891008/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 8 x 8 x 1000 mm material C45K SKU: 61890808](https://maedler.in/product/bright-key-steel-din-6880-8-x-8-x-1000-mm-material-c45k-sku-61890808/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 8 x 7 x 1000 mm material C45K SKU: 61890807](https://maedler.in/product/bright-key-steel-din-6880-8-x-7-x-1000-mm-material-c45k-sku-61890807/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 6 x 6 x 1000 mm material C45K SKU: 61890606](https://maedler.in/product/bright-key-steel-din-6880-6-x-6-x-1000-mm-material-c45k-sku-61890606/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 5 x 5 x 1000 mm material C45K SKU: 61890505](https://maedler.in/product/bright-key-steel-din-6880-5-x-5-x-1000-mm-material-c45k-sku-61890505/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 4 x 4 x 1000 mm material C45K SKU: 61890404](https://maedler.in/product/bright-key-steel-din-6880-4-x-4-x-1000-mm-material-c45k-sku-61890404/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 3 x 3 x 1000 mm material C45K SKU: 61890303](https://maedler.in/product/bright-key-steel-din-6880-3-x-3-x-1000-mm-material-c45k-sku-61890303/): Material: C45K. Standard length about 1000 mm. - [Bright key steel DIN 6880 2 x 2 x 1000 mm material C45K SKU: 61890202](https://maedler.in/product/bright-key-steel-din-6880-2-x-2-x-1000-mm-material-c45k-sku-61890202/): Material: C45K. Standard length about 1000 mm. - [Parallel pin DIN 7979 hardened steel diameter 25m6 length 120mm internal thread M16 SKU: 61852598](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-25m6-length-120mm-internal-thread-m16-sku-61852598/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 25m6 length 100mm internal thread M16 SKU: 61852595](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-25m6-length-100mm-internal-thread-m16-sku-61852595/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 25m6 length 90mm internal thread M16 SKU: 61852590](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-25m6-length-90mm-internal-thread-m16-sku-61852590/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 25m6 length 80mm internal thread M16 SKU: 61852580](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-25m6-length-80mm-internal-thread-m16-sku-61852580/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 25m6 length 70mm internal thread M16 SKU: 61852570](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-25m6-length-70mm-internal-thread-m16-sku-61852570/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 25m6 length 60mm internal thread M16 SKU: 61852560](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-25m6-length-60mm-internal-thread-m16-sku-61852560/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 25m6 length 55mm internal thread M16 SKU: 61852555](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-25m6-length-55mm-internal-thread-m16-sku-61852555/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 25m6 length 50mm internal thread M16 SKU: 61852550](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-25m6-length-50mm-internal-thread-m16-sku-61852550/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 25m6 length 45mm internal thread M16 SKU: 61852545](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-25m6-length-45mm-internal-thread-m16-sku-61852545/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 20m6 length 120mm internal thread M10 SKU: 61852098](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-20m6-length-120mm-internal-thread-m10-sku-61852098/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 20m6 length 100mm internal thread M10 SKU: 61852095](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-20m6-length-100mm-internal-thread-m10-sku-61852095/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 20m6 length 90mm internal thread M10 SKU: 61852090](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-20m6-length-90mm-internal-thread-m10-sku-61852090/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 20m6 length 80mm internal thread M10 SKU: 61852080](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-20m6-length-80mm-internal-thread-m10-sku-61852080/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 20m6 length 70mm internal thread M10 SKU: 61852070](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-20m6-length-70mm-internal-thread-m10-sku-61852070/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 20m6 length 60mm internal thread M10 SKU: 61852060](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-20m6-length-60mm-internal-thread-m10-sku-61852060/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 20m6 length 55mm internal thread M10 SKU: 61852055](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-20m6-length-55mm-internal-thread-m10-sku-61852055/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Parallel pin DIN 7979 hardened steel diameter 20m6 length 50mm internal thread M10 SKU: 61852050](https://maedler.in/product/parallel-pin-din-7979-hardened-steel-diameter-20m6-length-50mm-internal-thread-m10-sku-61852050/): Material: Steel, hardened and ground.Parallel Pins for sunk holes. One ending convex, with chamfer. Other ending with internal thread for demounting. Cylinder with flat area for bleeding the borehole, similar to DIN EN ISO 8735.Other types and versions on request. - [Bevel gear made of stainless steel 1.4305 module 2 15 teeth i=2:1 SKU: 36199056](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-15-teeth-i21-sku-36199056/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 16 teeth i=1:1 SKU: 36199007](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-16-teeth-i11-sku-36199007/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 60 teeth i=4:1 SKU: 36099793](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-60-teeth-i41-sku-36099793/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 15 teeth i=4:1 SKU: 36099792](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-15-teeth-i41-sku-36099792/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 48 teeth i=3:1 SKU: 36099781](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-48-teeth-i31-sku-36099781/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 16 teeth i=3:1 SKU: 36099780](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-16-teeth-i31-sku-36099780/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 30 teeth i=2:1 SKU: 36099757](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-30-teeth-i21-sku-36099757/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 15 teeth i=2:1 SKU: 36099756](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-15-teeth-i21-sku-36099756/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1.5 16 teeth i=1:1 SKU: 36099707](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-5-16-teeth-i11-sku-36099707/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 60 teeth i=4:1 SKU: 36099593](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-60-teeth-i41-sku-36099593/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 15 teeth i=4:1 SKU: 36099592](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-15-teeth-i41-sku-36099592/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 45 teeth i=3:1 SKU: 36099577](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-45-teeth-i31-sku-36099577/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 15 teeth i=3:1 SKU: 36099576](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-15-teeth-i31-sku-36099576/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 30 teeth i=2:1 SKU: 36099557](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-30-teeth-i21-sku-36099557/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 15 teeth i=2:1 SKU: 36099556](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-15-teeth-i21-sku-36099556/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 1 16 teeth i=1:1 SKU: 36099507](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-1-16-teeth-i11-sku-36099507/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 3.5 16 teeth i=1:1 bore 16mm SKU: 35950700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-3-5-16-teeth-i11-bore-16mm-sku-35950700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 3.0 16 teeth bore 14mm SKU: 35940700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-3-0-16-teeth-bore-14mm-sku-35940700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 2.5 16 teeth i=1:1 bore 12mm SKU: 35910700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-2-5-16-teeth-i11-bore-12mm-sku-35910700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 2.0 16 teeth bore 10mm SKU: 35900700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-2-0-16-teeth-bore-10mm-sku-35900700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 1.5 16 teeth i=1:1 bore 8mm SKU: 35870700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-1-5-16-teeth-i11-bore-8mm-sku-35870700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of die-cast zinc ZnAl4Cu1 module 1.0 16 teeth bore 6mm SKU: 35850700](https://maedler.in/product/bevel-gear-made-of-die-cast-zinc-znal4cu1-module-1-0-16-teeth-bore-6mm-sku-35850700/): Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 3.5 16 teeth i=1:1 bore 18mm SKU: 35650701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-3-5-16-teeth-i11-bore-18mm-sku-35650701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 3.5 16 teeth i=1:1 bore 18mm SKU: 35650700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-3-5-16-teeth-i11-bore-18mm-sku-35650700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 3 30 teeth i=2:1 bore 18mm SKU: 35645701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-3-30-teeth-i21-bore-18mm-sku-35645701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 3 30 teeth i=2:1 bore 18mm SKU: 35645700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-3-30-teeth-i21-bore-18mm-sku-35645700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 3 15 teeth i=2:1 bore 14mm SKU: 35645601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-3-15-teeth-i21-bore-14mm-sku-35645601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 3 15 teeth i=2:1 bore 14mm SKU: 35645600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-3-15-teeth-i21-bore-14mm-sku-35645600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 3 16 teeth i=1:1 bore 14mm SKU: 35640701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-3-16-teeth-i11-bore-14mm-sku-35640701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 3 16 teeth i=1:1 bore 14mm SKU: 35640700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-3-16-teeth-i11-bore-14mm-sku-35640700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 30 teeth i=3:1 bore 18mm SKU: 35617501](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-30-teeth-i31-bore-18mm-sku-35617501/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 30 teeth i=3:1 bore 18mm SKU: 35617500](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-30-teeth-i31-bore-18mm-sku-35617500/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 10 teeth i=3:1 bore 8mm SKU: 35617401](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-10-teeth-i31-bore-8mm-sku-35617401/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 10 teeth i=3:1 bore 8mm SKU: 35617400](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-10-teeth-i31-bore-8mm-sku-35617400/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 30 teeth i=2:1 bore 16mm SKU: 35615701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-30-teeth-i21-bore-16mm-sku-35615701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 30 teeth i=2:1 bore 16mm SKU: 35615700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-30-teeth-i21-bore-16mm-sku-35615700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 15 teeth i=2:1 bore 12mm SKU: 35615601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-15-teeth-i21-bore-12mm-sku-35615601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 15 teeth i=2:1 bore 12mm SKU: 35615600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-15-teeth-i21-bore-12mm-sku-35615600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2.5 16 teeth i=1:1 bore 12mm SKU: 35610701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-5-16-teeth-i11-bore-12mm-sku-35610701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2.5 16 teeth i=1:1 bore 12mm SKU: 35610700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-5-16-teeth-i11-bore-12mm-sku-35610700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 40 teeth i=4:1 bore 18mm SKU: 35608901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-40-teeth-i41-bore-18mm-sku-35608901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 40 teeth i=4:1 bore 18mm SKU: 35608900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-40-teeth-i41-bore-18mm-sku-35608900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 10 teeth i=4:1 bore 6mm SKU: 35608801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-10-teeth-i41-bore-6mm-sku-35608801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 10 teeth i=4:1 bore 6mm SKU: 35608800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-10-teeth-i41-bore-6mm-sku-35608800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 30 teeth i=3:1 bore 12mm SKU: 35607501](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-30-teeth-i31-bore-12mm-sku-35607501/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 30 teeth i=3:1 bore 12mm SKU: 35607500](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-30-teeth-i31-bore-12mm-sku-35607500/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 10 teeth i=3:1 bore 6mm SKU: 35607401](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-10-teeth-i31-bore-6mm-sku-35607401/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 10 teeth i=3:1 bore 6mm SKU: 35607400](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-10-teeth-i31-bore-6mm-sku-35607400/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 30 teeth i=2:1 bore 12mm SKU: 35605701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-30-teeth-i21-bore-12mm-sku-35605701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 30 teeth i=2:1 bore 12mm SKU: 35605700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-30-teeth-i21-bore-12mm-sku-35605700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 15 teeth i=2:1 bore 10mm SKU: 35605601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-15-teeth-i21-bore-10mm-sku-35605601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 15 teeth i=2:1 bore 10mm SKU: 35605600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-15-teeth-i21-bore-10mm-sku-35605600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 2 16 teeth i=1:1 bore 10mm SKU: 35600701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-2-16-teeth-i11-bore-10mm-sku-35600701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 2 16 teeth i=1:1 bore 10mm SKU: 35600700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-2-16-teeth-i11-bore-10mm-sku-35600700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 40 teeth i=4:1 bore 12mm SKU: 35578901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-40-teeth-i41-bore-12mm-sku-35578901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 40 teeth i=4:1 bore 12mm SKU: 35578900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-40-teeth-i41-bore-12mm-sku-35578900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 10 teeth i=4:1 bore 5mm SKU: 35578801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-10-teeth-i41-bore-5mm-sku-35578801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 10 teeth i=4:1 bore 5mm SKU: 35578800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-10-teeth-i41-bore-5mm-sku-35578800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 45 teeth i=3:1 bore 12mm SKU: 35577701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-45-teeth-i31-bore-12mm-sku-35577701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 45 teeth i=3:1 bore 12mm SKU: 35577700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-45-teeth-i31-bore-12mm-sku-35577700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 15 teeth i=3:1 bore 8mm SKU: 35577601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-15-teeth-i31-bore-8mm-sku-35577601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=3:1 bore 8mm SKU: 35577600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-15-teeth-i31-bore-8mm-sku-35577600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 30 teeth i=2:1 bore 10mm SKU: 35575701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-30-teeth-i21-bore-10mm-sku-35575701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 30 teeth i=2:1 bore 10mm SKU: 35575700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-30-teeth-i21-bore-10mm-sku-35575700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 15 teeth i=2:1 bore 8mm SKU: 35575601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-15-teeth-i21-bore-8mm-sku-35575601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 15 teeth i=2:1 bore 8mm SKU: 35575600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-15-teeth-i21-bore-8mm-sku-35575600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 24 teeth i=1,5:1 bore 8mm SKU: 35574901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-24-teeth-i151-bore-8mm-sku-35574901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 24 teeth i=1,5:1 bore 10mm SKU: 35574900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-24-teeth-i151-bore-10mm-sku-35574900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 16 teeth i=1,5:1 bore 8mm SKU: 35574801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-16-teeth-i151-bore-8mm-sku-35574801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 16 teeth i=1,5:1 bore 8mm SKU: 35574800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-16-teeth-i151-bore-8mm-sku-35574800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1.5 16 teeth i=1:1 bore 8mm SKU: 35570701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-5-16-teeth-i11-bore-8mm-sku-35570701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1.5 16 teeth i=1:1 bore 8mm SKU: 35570700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-5-16-teeth-i11-bore-8mm-sku-35570700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 60 teeth i=5:1 bore 10mm SKU: 35559901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-60-teeth-i51-bore-10mm-sku-35559901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 60 teeth i=5:1 bore 10mm SKU: 35559900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-60-teeth-i51-bore-10mm-sku-35559900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 12 teeth i=5:1 bore 4mm SKU: 35559801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-12-teeth-i51-bore-4mm-sku-35559801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 12 teeth i=5:1 bore 4mm SKU: 35559800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-12-teeth-i51-bore-4mm-sku-35559800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 40 teeth i=4:1 bore 10mm SKU: 35558901](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-40-teeth-i41-bore-10mm-sku-35558901/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 40 teeth i=4:1 bore 10mm SKU: 35558900](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-40-teeth-i41-bore-10mm-sku-35558900/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 10 teeth i=4:1 bore 4mm SKU: 35558801](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-10-teeth-i41-bore-4mm-sku-35558801/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 10 teeth i=4:1 bore 4mm SKU: 35558800](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-10-teeth-i41-bore-4mm-sku-35558800/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 45 teeth i=3:1 bore 10mm SKU: 35557701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-45-teeth-i31-bore-10mm-sku-35557701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 45 teeth i=3:1 bore 10mm SKU: 35557700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-45-teeth-i31-bore-10mm-sku-35557700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 15 teeth i=3:1 bore 5mm SKU: 35557601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-15-teeth-i31-bore-5mm-sku-35557601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 15 teeth i=3:1 bore 5mm SKU: 35557600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-15-teeth-i31-bore-5mm-sku-35557600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 30 teeth i=2:1 bore 8mm SKU: 35555701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-30-teeth-i21-bore-8mm-sku-35555701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=2:1 bore 8mm SKU: 35555700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-30-teeth-i21-bore-8mm-sku-35555700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 15 teeth i=2:1 bore 5mm SKU: 35555601](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-15-teeth-i21-bore-5mm-sku-35555601/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 15 teeth i=2:1 bore 5mm SKU: 35555600](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-15-teeth-i21-bore-5mm-sku-35555600/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 30 teeth i=1:1 bore 6mm SKU: 35552001](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-30-teeth-i11-bore-6mm-sku-35552001/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 30 teeth i=1:1 bore 6mm SKU: 35552000](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-30-teeth-i11-bore-6mm-sku-35552000/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 1 16 teeth i=1:1 bore 5mm SKU: 35550701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-1-16-teeth-i11-bore-5mm-sku-35550701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 1 16 teeth i=1:1 bore 5mm SKU: 35550700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-1-16-teeth-i11-bore-5mm-sku-35550700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyketone die-cast module 0.5 16 teeth i=1:1 bore 3mm SKU: 35520701](https://maedler.in/product/bevel-gear-made-of-polyketone-die-cast-module-0-5-16-teeth-i11-bore-3mm-sku-35520701/): Material: Polyketone resin, die-cast, ivory-colored. Shaft angle 90º. Version: injection-moulded. Bores from Module 1.5 machined. Lower friction leads to much larger lifespan, even without lubrication. Much higher safety against tooth breaking, specially at longterm usage. Temperature Range: -40°C to +140°C, due to the load. Note for ordering: The bevel gears only run as a pair at the stated ratio. These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of polyacetal resin die-cast module 0.5 16 teeth i=1:1 bore 3mm SKU: 35520700](https://maedler.in/product/bevel-gear-made-of-polyacetal-resin-die-cast-module-0-5-16-teeth-i11-bore-3mm-sku-35520700/): Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 60 teeth i=4:1 milled SKU: 35059300](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-60-teeth-i41-milled-sku-35059300/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 15 teeth i=4:1 milled SKU: 35059200](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-15-teeth-i41-milled-sku-35059200/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 45 teeth i=3:1 milled SKU: 35057700](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-45-teeth-i31-milled-sku-35057700/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 15 teeth i=3:1 milled SKU: 35057600](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-15-teeth-i31-milled-sku-35057600/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 40 teeth i=2:1 milled SKU: 35056100](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-40-teeth-i21-milled-sku-35056100/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of brass Ms58 module 1 20 teeth i=2:1 milled SKU: 35056000](https://maedler.in/product/bevel-gear-made-of-brass-ms58-module-1-20-teeth-i21-milled-sku-35056000/): Material:Brass Ms58 (2.0401). Milled teeth. Shaft angle = 90°. The bevel gears only run as a pair at the stated ratio. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Plate wheel KRL without hub 083 1/2x3/16" 47 teeth material steel SKU: 10324700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-47-teeth-material-steel-sku-10324700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 45 teeth material steel SKU: 10324500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-45-teeth-material-steel-sku-10324500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 42 teeth material steel SKU: 10324200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-42-teeth-material-steel-sku-10324200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 40 teeth material steel SKU: 10324000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-40-teeth-material-steel-sku-10324000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 38 teeth material steel SKU: 10323800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-38-teeth-material-steel-sku-10323800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 36 teeth material steel SKU: 10323600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-36-teeth-material-steel-sku-10323600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 35 teeth material steel SKU: 10323500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-35-teeth-material-steel-sku-10323500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 34 teeth material steel SKU: 10323400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-34-teeth-material-steel-sku-10323400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 32 teeth material steel SKU: 10323200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-32-teeth-material-steel-sku-10323200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 30 teeth material steel SKU: 10323000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-30-teeth-material-steel-sku-10323000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 28 teeth material steel SKU: 10322800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-28-teeth-material-steel-sku-10322800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 27 teeth material steel SKU: 10322700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-27-teeth-material-steel-sku-10322700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 26 teeth material steel SKU: 10322600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-26-teeth-material-steel-sku-10322600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 25 teeth material steel SKU: 10322500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-25-teeth-material-steel-sku-10322500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 24 teeth material steel SKU: 10322400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-24-teeth-material-steel-sku-10322400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 23 teeth material steel SKU: 10322300](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-23-teeth-material-steel-sku-10322300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 22 teeth material steel SKU: 10322200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-22-teeth-material-steel-sku-10322200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 21 teeth material steel SKU: 10322100](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-21-teeth-material-steel-sku-10322100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 20 teeth material steel SKU: 10322000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-20-teeth-material-steel-sku-10322000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 19 teeth material steel SKU: 10321900](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-19-teeth-material-steel-sku-10321900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 18 teeth material steel SKU: 10321800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-18-teeth-material-steel-sku-10321800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 17 teeth material steel SKU: 10321700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-17-teeth-material-steel-sku-10321700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 16 teeth material steel SKU: 10321600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-16-teeth-material-steel-sku-10321600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 15 teeth material steel SKU: 10321500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-15-teeth-material-steel-sku-10321500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 14 teeth material steel SKU: 10321400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-14-teeth-material-steel-sku-10321400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 13 teeth material steel SKU: 10321300](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-13-teeth-material-steel-sku-10321300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 12 teeth material steel SKU: 10321200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-12-teeth-material-steel-sku-10321200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 11 teeth material steel SKU: 10321100](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-11-teeth-material-steel-sku-10321100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 10 teeth material steel SKU: 10321000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-10-teeth-material-steel-sku-10321000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 9 teeth material steel SKU: 10320900](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-9-teeth-material-steel-sku-10320900/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 8 teeth material steel SKU: 10320800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-8-teeth-material-steel-sku-10320800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 40 teeth material steel SKU: 10314000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-40-teeth-material-steel-sku-10314000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 39 teeth material steel SKU: 10313900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-39-teeth-material-steel-sku-10313900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 38 teeth material steel SKU: 10313800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-38-teeth-material-steel-sku-10313800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 37 teeth material steel SKU: 10313700](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-37-teeth-material-steel-sku-10313700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 36 teeth material steel SKU: 10313600](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-36-teeth-material-steel-sku-10313600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 35 teeth material steel SKU: 10313500](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-35-teeth-material-steel-sku-10313500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 34 teeth material steel SKU: 10313400](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-34-teeth-material-steel-sku-10313400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 33 teeth material steel SKU: 10313300](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-33-teeth-material-steel-sku-10313300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 32 teeth material steel SKU: 10313200](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-32-teeth-material-steel-sku-10313200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 31 teeth material steel SKU: 10313100](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-31-teeth-material-steel-sku-10313100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 30 teeth material steel SKU: 10313000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-30-teeth-material-steel-sku-10313000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 29 teeth material steel SKU: 10312900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-29-teeth-material-steel-sku-10312900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 28 teeth material steel SKU: 10312800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-28-teeth-material-steel-sku-10312800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 27 teeth material steel SKU: 10312700](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-27-teeth-material-steel-sku-10312700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 26 teeth material steel SKU: 10312600](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-26-teeth-material-steel-sku-10312600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 25 teeth material steel SKU: 10312500](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-25-teeth-material-steel-sku-10312500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 24 teeth material steel SKU: 10312400](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-24-teeth-material-steel-sku-10312400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 23 teeth material steel SKU: 10312300](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-23-teeth-material-steel-sku-10312300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 22 teeth material steel SKU: 10312200](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-22-teeth-material-steel-sku-10312200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 21 teeth material steel SKU: 10312100](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-21-teeth-material-steel-sku-10312100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 20 teeth material steel SKU: 10312000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-20-teeth-material-steel-sku-10312000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 19 teeth material steel SKU: 10311900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-19-teeth-material-steel-sku-10311900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 18 teeth material steel SKU: 10311800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-18-teeth-material-steel-sku-10311800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 17 teeth material steel SKU: 10311700](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-17-teeth-material-steel-sku-10311700/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 16 teeth material steel SKU: 10311600](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-16-teeth-material-steel-sku-10311600/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 15 teeth material steel SKU: 10311500](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-15-teeth-material-steel-sku-10311500/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 14 teeth material steel SKU: 10311400](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-14-teeth-material-steel-sku-10311400/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 13 teeth material steel SKU: 10311300](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-13-teeth-material-steel-sku-10311300/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 12 teeth material steel SKU: 10311200](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-12-teeth-material-steel-sku-10311200/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 11 teeth material steel SKU: 10311100](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-11-teeth-material-steel-sku-10311100/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 10 teeth material steel SKU: 10311000](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-10-teeth-material-steel-sku-10311000/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 9 teeth material steel SKU: 10310900](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-9-teeth-material-steel-sku-10310900/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 083 1/2x3/16" 8 teeth material steel SKU: 10310800](https://maedler.in/product/sprocket-krs-with-hub-083-1-2x3-16-8-teeth-material-steel-sku-10310800/): Material: Steel C45, not hardened. Pre-bored. General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 25 teeth material polyacetal resin SKU: 10252500](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-25-teeth-material-polyacetal-resin-sku-10252500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 23 teeth material polyacetal resin SKU: 10252300](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-23-teeth-material-polyacetal-resin-sku-10252300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 21 teeth material polyacetal resin SKU: 10252100](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-21-teeth-material-polyacetal-resin-sku-10252100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 19 teeth material polyacetal resin SKU: 10251900](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-19-teeth-material-polyacetal-resin-sku-10251900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 17 teeth material polyacetal resin SKU: 10251700](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-17-teeth-material-polyacetal-resin-sku-10251700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 15 teeth material polyacetal resin SKU: 10251500](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-15-teeth-material-polyacetal-resin-sku-10251500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 081 1/2 X 1/8" 13 teeth material polyacetal resin SKU: 10251300](https://maedler.in/product/sprocket-krk-with-hub-081-1-2-x-1-8-13-teeth-material-polyacetal-resin-sku-10251300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 3 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 114 teeth material steel SKU: 10228800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-114-teeth-material-steel-sku-10228800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 90 teeth material steel SKU: 10228200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-90-teeth-material-steel-sku-10228200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 80 teeth material steel SKU: 10228000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-80-teeth-material-steel-sku-10228000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 76 teeth material steel SKU: 10227600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-76-teeth-material-steel-sku-10227600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 72 teeth material steel SKU: 10227200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-72-teeth-material-steel-sku-10227200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 70 teeth material steel SKU: 10227000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-70-teeth-material-steel-sku-10227000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 65 teeth material steel SKU: 10226500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-65-teeth-material-steel-sku-10226500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 60 teeth material steel SKU: 10226000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-60-teeth-material-steel-sku-10226000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 57 teeth material steel SKU: 10225700](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-57-teeth-material-steel-sku-10225700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 54 teeth material steel SKU: 10225400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-54-teeth-material-steel-sku-10225400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 50 teeth material steel SKU: 10225000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-50-teeth-material-steel-sku-10225000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 48 teeth material steel SKU: 10224800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-48-teeth-material-steel-sku-10224800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 45 teeth material steel SKU: 10224500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-45-teeth-material-steel-sku-10224500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 42 teeth material steel SKU: 10224200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-42-teeth-material-steel-sku-10224200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 40 teeth material steel SKU: 10224000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-40-teeth-material-steel-sku-10224000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 38 teeth material steel SKU: 10223800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-38-teeth-material-steel-sku-10223800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 36 teeth material steel SKU: 10223600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-36-teeth-material-steel-sku-10223600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 35 teeth material steel SKU: 10223500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-35-teeth-material-steel-sku-10223500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 34 teeth material steel SKU: 10223400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-34-teeth-material-steel-sku-10223400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 32 teeth material steel SKU: 10223200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-32-teeth-material-steel-sku-10223200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 30 teeth material steel SKU: 10223000](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-30-teeth-material-steel-sku-10223000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 28 teeth material steel SKU: 10222800](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-28-teeth-material-steel-sku-10222800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 27 teeth material steel SKU: 10222700](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-27-teeth-material-steel-sku-10222700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 26 teeth material steel SKU: 10222600](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-26-teeth-material-steel-sku-10222600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 25 teeth material steel SKU: 10222500](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-25-teeth-material-steel-sku-10222500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 24 teeth material steel SKU: 10222400](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-24-teeth-material-steel-sku-10222400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 23 teeth material steel SKU: 10222300](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-23-teeth-material-steel-sku-10222300/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 22 teeth material steel SKU: 10222200](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-22-teeth-material-steel-sku-10222200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 081 1/2x1/8" 21 teeth material steel SKU: 10222100](https://maedler.in/product/plate-wheel-krl-without-hub-081-1-2x1-8-21-teeth-material-steel-sku-10222100/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 32 reinforced (H = 4 mm, see drawing), from a Teeth Number of 90 H = 6 mm. General dimensions: B1 = 3 mm, c = 1,0 mm, r3 = 13 mm. Other dimensions: See the table. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M10 x 12mm SKU: 61941012](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m10-x-12mm-sku-61941012/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M10 x 10mm SKU: 61941010](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m10-x-10mm-sku-61941010/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M8 x 30mm SKU: 61940830](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m8-x-30mm-sku-61940830/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M8 x 25mm SKU: 61940825](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m8-x-25mm-sku-61940825/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M8 x 20mm SKU: 61940820](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m8-x-20mm-sku-61940820/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M8 x 16mm SKU: 61940816](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m8-x-16mm-sku-61940816/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M8 x 12mm SKU: 61940812](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m8-x-12mm-sku-61940812/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M8 x 10mm SKU: 61940810](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m8-x-10mm-sku-61940810/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M8 x 8mm SKU: 61940808](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m8-x-8mm-sku-61940808/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M6 x 30mm SKU: 61940630](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m6-x-30mm-sku-61940630/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M6 x 25mm SKU: 61940625](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m6-x-25mm-sku-61940625/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M6 x 20mm SKU: 61940620](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m6-x-20mm-sku-61940620/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M6 x 16mm SKU: 61940616](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m6-x-16mm-sku-61940616/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M6 x 12mm SKU: 61940612](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m6-x-12mm-sku-61940612/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M6 x 10mm SKU: 61940610](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m6-x-10mm-sku-61940610/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M6 x 8mm SKU: 61940608](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m6-x-8mm-sku-61940608/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M6 x 6mm SKU: 61940606](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m6-x-6mm-sku-61940606/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M5 x 25mm SKU: 61940525](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m5-x-25mm-sku-61940525/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M5 x 20mm SKU: 61940520](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m5-x-20mm-sku-61940520/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M5 x 16mm SKU: 61940516](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m5-x-16mm-sku-61940516/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M5 x 12mm SKU: 61940512](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m5-x-12mm-sku-61940512/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M5 x 10mm SKU: 61940510](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m5-x-10mm-sku-61940510/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M5 x 8mm SKU: 61940508](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m5-x-8mm-sku-61940508/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M5 x 6mm SKU: 61940506](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m5-x-6mm-sku-61940506/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M5 x 5mm SKU: 61940505](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m5-x-5mm-sku-61940505/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M4 x 20mm SKU: 61940420](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m4-x-20mm-sku-61940420/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M4 x 16mm SKU: 61940416](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m4-x-16mm-sku-61940416/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M4 x 12mm SKU: 61940412](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m4-x-12mm-sku-61940412/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M4 x 10mm SKU: 61940410](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m4-x-10mm-sku-61940410/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M4 x 8mm SKU: 61940408](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m4-x-8mm-sku-61940408/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M4 x 6mm SKU: 61940406](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m4-x-6mm-sku-61940406/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M4 x 5mm SKU: 61940405](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m4-x-5mm-sku-61940405/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M4 x 4mm SKU: 61940404](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m4-x-4mm-sku-61940404/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M3 x 8mm SKU: 61940308](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m3-x-8mm-sku-61940308/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M12 x 30mm SKU: 61911230](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m12-x-30mm-sku-61911230/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M12 x 25mm SKU: 61911225](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m12-x-25mm-sku-61911225/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M12 x 20mm SKU: 61911220](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m12-x-20mm-sku-61911220/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M12 x 16mm SKU: 61911216](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m12-x-16mm-sku-61911216/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M10 x 30mm SKU: 61911030](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m10-x-30mm-sku-61911030/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M10 x 25mm SKU: 61911025](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m10-x-25mm-sku-61911025/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M10 x 20mm SKU: 61911020](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m10-x-20mm-sku-61911020/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M10 x 16mm SKU: 61911016](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m10-x-16mm-sku-61911016/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M10 x 12mm SKU: 61911012](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m10-x-12mm-sku-61911012/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M10 x 10mm SKU: 61911010](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m10-x-10mm-sku-61911010/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M8 x 30mm SKU: 61910830](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m8-x-30mm-sku-61910830/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M8 x 25mm SKU: 61910825](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m8-x-25mm-sku-61910825/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M8 x 20mm SKU: 61910820](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m8-x-20mm-sku-61910820/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M8 x 16mm SKU: 61910816](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m8-x-16mm-sku-61910816/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M8 x 12mm SKU: 61910812](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m8-x-12mm-sku-61910812/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M8 x 10mm SKU: 61910810](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m8-x-10mm-sku-61910810/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M8 x 8mm SKU: 61910808](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m8-x-8mm-sku-61910808/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M6 x 30mm SKU: 61910630](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m6-x-30mm-sku-61910630/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M6 x 25mm SKU: 61910625](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m6-x-25mm-sku-61910625/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M6 x 20mm SKU: 61910620](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m6-x-20mm-sku-61910620/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M6 x 16mm SKU: 61910616](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m6-x-16mm-sku-61910616/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M6 x 12mm SKU: 61910612](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m6-x-12mm-sku-61910612/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M6 x 10mm SKU: 61910610](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m6-x-10mm-sku-61910610/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M6 x 8mm SKU: 61910608](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m6-x-8mm-sku-61910608/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M6 x 6mm SKU: 61910606](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m6-x-6mm-sku-61910606/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M5 x 25mm SKU: 61910525](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m5-x-25mm-sku-61910525/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M5 x 20mm SKU: 61910520](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m5-x-20mm-sku-61910520/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M5 x 16mm SKU: 61910516](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m5-x-16mm-sku-61910516/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M5 x 12mm SKU: 61910512](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m5-x-12mm-sku-61910512/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M5 x 10mm SKU: 61910510](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m5-x-10mm-sku-61910510/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M5 x 8mm SKU: 61910508](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m5-x-8mm-sku-61910508/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M5 x 6mm SKU: 61910506](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m5-x-6mm-sku-61910506/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M5 x 5mm SKU: 61910505](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m5-x-5mm-sku-61910505/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M4 x 20mm SKU: 61910420](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m4-x-20mm-sku-61910420/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M4 x 16mm SKU: 61910416](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m4-x-16mm-sku-61910416/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M4 x 12mm SKU: 61910412](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m4-x-12mm-sku-61910412/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M4 x 10mm SKU: 61910410](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m4-x-10mm-sku-61910410/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M4 x 8mm SKU: 61910408](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m4-x-8mm-sku-61910408/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M4 x 6mm SKU: 61910406](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m4-x-6mm-sku-61910406/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M4 x 5mm SKU: 61910405](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m4-x-5mm-sku-61910405/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M4 x 4mm SKU: 61910404](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m4-x-4mm-sku-61910404/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M3 x 8mm SKU: 61910308](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m3-x-8mm-sku-61910308/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) stainless steel A2 M3 x 5mm SKU: 61910305](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-stainless-steel-a2-m3-x-5mm-sku-61910305/): Material: Stainless steel A2.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M12 x 30mm SKU: 61901230](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m12-x-30mm-sku-61901230/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M12 x 25mm SKU: 61901225](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m12-x-25mm-sku-61901225/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M12 x 20mm SKU: 61901220](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m12-x-20mm-sku-61901220/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M12 x 16mm SKU: 61901216](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m12-x-16mm-sku-61901216/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M12 x 12mm SKU: 61901212](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m12-x-12mm-sku-61901212/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M10 x 30mm SKU: 61901030](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m10-x-30mm-sku-61901030/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M10 x 25mm SKU: 61901025](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m10-x-25mm-sku-61901025/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M10 x 20mm SKU: 61901020](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m10-x-20mm-sku-61901020/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M10 x 16mm SKU: 61901016](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m10-x-16mm-sku-61901016/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M10 x 12mm SKU: 61901012](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m10-x-12mm-sku-61901012/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M10 x 10mm SKU: 61901010](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m10-x-10mm-sku-61901010/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M8 x 30mm SKU: 61900830](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m8-x-30mm-sku-61900830/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M8 x 25mm SKU: 61900825](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m8-x-25mm-sku-61900825/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M8 x 20mm SKU: 61900820](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m8-x-20mm-sku-61900820/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M8 x 16mm SKU: 61900816](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m8-x-16mm-sku-61900816/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M8 x 12mm SKU: 61900812](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m8-x-12mm-sku-61900812/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M8 x 10mm SKU: 61900810](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m8-x-10mm-sku-61900810/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M8 x 8mm SKU: 61900808](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m8-x-8mm-sku-61900808/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M6 x 30mm SKU: 61900630](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m6-x-30mm-sku-61900630/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M6 x 25mm SKU: 61900625](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m6-x-25mm-sku-61900625/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M6 x 20mm SKU: 61900620](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m6-x-20mm-sku-61900620/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M6 x 16mm SKU: 61900616](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m6-x-16mm-sku-61900616/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M6 x 12mm SKU: 61900612](https://maedler.in/product/hexagon-socket-set-screw-with-cone-point-iso-4027-ex-din-914-steel-45h-m6-x-12mm-sku-61900612/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with flated cone (dimension dt).To use as a grub screw for fixing an element on a shaft.For a higher retaining force, there should be a countersink made into the shaft. - [Worm gear unit KES 30 version B center distance 30mm ratio 1:5 output hollow shaft 14mm SKU: 42003005B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-15-output-hollow-shaft-14mm-sku-42003005b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 1:5 output hollow shaft 14mm SKU: 42003005](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-15-output-hollow-shaft-14mm-sku-42003005/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit G/II version A centre distance 31mm i=30:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42003000](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i301-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42003000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=24:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42002400](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i241-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42002400/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit KES 20 version B center distance 20mm ratio 65:1 output hollow shaft 12mm SKU: 42002065B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-651-output-hollow-shaft-12mm-sku-42002065b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 65:1 output hollow shaft 12mm SKU: 42002065](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-651-output-hollow-shaft-12mm-sku-42002065/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 40:1 output hollow shaft 12mm SKU: 42002040B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-401-output-hollow-shaft-12mm-sku-42002040b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 40:1 output hollow shaft 12mm SKU: 42002040](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-401-output-hollow-shaft-12mm-sku-42002040/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 30:1 output hollow shaft 12mm SKU: 42002030B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-301-output-hollow-shaft-12mm-sku-42002030b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 30:1 output hollow shaft 12mm SKU: 42002030](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-301-output-hollow-shaft-12mm-sku-42002030/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 23:1 output hollow shaft 12mm SKU: 42002023B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-231-output-hollow-shaft-12mm-sku-42002023b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 23:1 output hollow shaft 12mm SKU: 42002023](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-231-output-hollow-shaft-12mm-sku-42002023/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 18:1 output hollow shaft 12mm SKU: 42002018B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-181-output-hollow-shaft-12mm-sku-42002018b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 18:1 output hollow shaft 12mm SKU: 42002018](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-181-output-hollow-shaft-12mm-sku-42002018/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 15:1 output hollow shaft 12mm SKU: 42002015B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-151-output-hollow-shaft-12mm-sku-42002015b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 15:1 output hollow shaft 12mm SKU: 42002015](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-151-output-hollow-shaft-12mm-sku-42002015/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version B center distance 20mm ratio 13:1 output hollow shaft 12mm SKU: 42002013B](https://maedler.in/product/worm-gear-unit-kes-20-version-b-center-distance-20mm-ratio-131-output-hollow-shaft-12mm-sku-42002013b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 20 version A center distance 20mm ratio 13:1 output hollow shaft 12mm SKU: 42002013](https://maedler.in/product/worm-gear-unit-kes-20-version-a-center-distance-20mm-ratio-131-output-hollow-shaft-12mm-sku-42002013/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 20mm, in 7 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit G/II version A centre distance 31mm i=20:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42002000](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42002000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=18:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42001800](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i181-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42001800/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit KES 15 version B center distance 15mm ratio 47:1 output hollow shaft 8mm SKU: 42001547B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-471-output-hollow-shaft-8mm-sku-42001547b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 47:1 output hollow shaft 8mm SKU: 42001547](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-471-output-hollow-shaft-8mm-sku-42001547/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version B center distance 15mm ratio 40:1 output hollow shaft 8mm SKU: 42001540B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-401-output-hollow-shaft-8mm-sku-42001540b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 40:1 output hollow shaft 8mm SKU: 42001540](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-401-output-hollow-shaft-8mm-sku-42001540/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version B center distance 15mm ratio 30:1 output hollow shaft 8mm SKU: 42001530B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-301-output-hollow-shaft-8mm-sku-42001530b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 30:1 output hollow shaft 8mm SKU: 42001530](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-301-output-hollow-shaft-8mm-sku-42001530/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version B center distance 15mm ratio 18:1 output hollow shaft 8mm SKU: 42001518B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-181-output-hollow-shaft-8mm-sku-42001518b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 18:1 output hollow shaft 8mm SKU: 42001518](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-181-output-hollow-shaft-8mm-sku-42001518/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version B center distance 15mm ratio 12:1 output hollow shaft 8mm SKU: 42001512B](https://maedler.in/product/worm-gear-unit-kes-15-version-b-center-distance-15mm-ratio-121-output-hollow-shaft-8mm-sku-42001512b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 15 version A center distance 15mm ratio 12:1 output hollow shaft 8mm SKU: 42001512](https://maedler.in/product/worm-gear-unit-kes-15-version-a-center-distance-15mm-ratio-121-output-hollow-shaft-8mm-sku-42001512/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 15mm, in 5 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit G/II version A centre distance 31mm i=15:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42001500](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42001500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=12:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42001200](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i121-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42001200/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=10:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42001000](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i101-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42001000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=7:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42000700](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i71-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42000700/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=5:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42000500](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i51-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42000500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 30R SKU: 41035935](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-30r-sku-41035935/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 30R SKU: 41035930](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-30r-sku-41035930/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 30R SKU: 41035925](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-30r-sku-41035925/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 30R SKU: 41035920](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-30r-sku-41035920/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 30R SKU: 41035915](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-30r-sku-41035915/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 30R SKU: 41035910](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-30r-sku-41035910/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 30L SKU: 41035835](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-30l-sku-41035835/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 30L SKU: 41035830](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-30l-sku-41035830/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 30L SKU: 41035825](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-30l-sku-41035825/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 30L SKU: 41035820](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-30l-sku-41035820/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 30L SKU: 41035815](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-30l-sku-41035815/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 30L SKU: 41035810](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-30l-sku-41035810/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 20 SKU: 41035735](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-20-sku-41035735/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 20 SKU: 41035730](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-20-sku-41035730/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 20 SKU: 41035725](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-20-sku-41035725/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 20 SKU: 41035720](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-20-sku-41035720/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 20 SKU: 41035715](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-20-sku-41035715/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW3 with polyacetal bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 20 SKU: 41035710](https://maedler.in/product/open-angular-drive-ow3-with-polyacetal-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-20-sku-41035710/): Material: Housing from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301(AISI 304), dismountable.Bevel gears from polyacetal resin, injection-moulded.• Open angular gear drive, ratio 1:1.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.• Number of teeth: 16/16.• Shaft angle: 90º.• Temperature range: - 20°C to +100º C.Three shafts with three bevel gears. Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it´s sense of rotation be chosen freely. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 10 SKU: 41035635](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-10-sku-41035635/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 10 SKU: 41035630](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-10-sku-41035630/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 10 SKU: 41035625](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-10-sku-41035625/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 10 SKU: 41035620](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-10-sku-41035620/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 10 SKU: 41035615](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-10-sku-41035615/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyketone bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 10 SKU: 41035610](https://maedler.in/product/open-angular-drive-ow2-with-polyketone-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-10-sku-41035610/): Material: Housing made from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from acetal or polyketone resin, injection-moulded.• Low cost angular gear drive, ratio 1:1, 6 sizes.• Suitable for lower torques and intermittend use.• Shafts running directly in the self-lubricating housing material.• Easy to mount and maintenance-free.Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking. Shaft angle = 90º. Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 18mm module 3.5 16 teeth 1:1 version 10 SKU: 41035535](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-18mm-module-3-5-16-teeth-11-version-10-sku-41035535/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 15mm module 3 16 teeth 1:1 version 10 SKU: 41035530](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-15mm-module-3-16-teeth-11-version-10-sku-41035530/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 12mm module 2.5 16 teeth 1:1 version 10 SKU: 41035525](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-12mm-module-2-5-16-teeth-11-version-10-sku-41035525/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 10mm module 2 16 teeth 1:1 version 10 SKU: 41035520](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-10mm-module-2-16-teeth-11-version-10-sku-41035520/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 8mm module 1.5 16 teeth 1:1 version 10 SKU: 41035515](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-8mm-module-1-5-16-teeth-11-version-10-sku-41035515/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Open angular drive OW2 with polyacetal bevel gears stainless steel shafts Ø 5mm module 1 16 teeth 1:1 version 10 SKU: 41035510](https://maedler.in/product/open-angular-drive-ow2-with-polyacetal-bevel-gears-stainless-steel-shafts-o-5mm-module-1-16-teeth-11-version-10-sku-41035510/): Material: Housing made from zinc die-cast ZnAI4Cu1.Shafts made from stainless steel 1.4301 (AISI 304), dismountable.Bevel gears from polyacetal resin.Low cost angular gear drive, ratio 1:1, 6 sizes.Suitable for lower torques and intermittend use.Stainless Shafts running directly in the self-lubricating housing material.Easy to mount and maintenance-free.Shaft angle = 90º.Temperature range - 20°C to +100º C. - [Bevel gearbox KEK size 7 ratio 1:1 shaft diameter 12mm housing length 60mm SKU: 41000107](https://maedler.in/product/bevel-gearbox-kek-size-7-ratio-11-shaft-diameter-12mm-housing-length-60mm-sku-41000107/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 6 ratio 1:1 shaft diameter 12mm housing length 56mm SKU: 41000106](https://maedler.in/product/bevel-gearbox-kek-size-6-ratio-11-shaft-diameter-12mm-housing-length-56mm-sku-41000106/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 5 ratio 1:1 shaft diameter 12mm housing length 53mm SKU: 41000105](https://maedler.in/product/bevel-gearbox-kek-size-5-ratio-11-shaft-diameter-12mm-housing-length-53mm-sku-41000105/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 4 ratio 1:1 shaft diameter 12mm housing length 46mm SKU: 41000104](https://maedler.in/product/bevel-gearbox-kek-size-4-ratio-11-shaft-diameter-12mm-housing-length-46mm-sku-41000104/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 3 ratio 1:1 shaft diameter 10mm housing length 42mm SKU: 41000103](https://maedler.in/product/bevel-gearbox-kek-size-3-ratio-11-shaft-diameter-10mm-housing-length-42mm-sku-41000103/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 2 ratio 1:1 shaft diameter 8mm housing length 35mm SKU: 41000102](https://maedler.in/product/bevel-gearbox-kek-size-2-ratio-11-shaft-diameter-8mm-housing-length-35mm-sku-41000102/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox KEK size 1 ratio 1:1 shaft diameter 6mm housing length 32mm SKU: 41000101](https://maedler.in/product/bevel-gearbox-kek-size-1-ratio-11-shaft-diameter-6mm-housing-length-32mm-sku-41000101/): Angular drives with high torques at very low dimensions. Suitable in a wide variety of applications 7 Sizes. Ratio 1:1.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.Gearing: Bevel gears from steel, surface hardened. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 3°+/-1°.Operating time: 20% at 5 min. Life time: 1,000 hours at max. performance at speed 500 min-1and operating time 20%.Permiss. operating temperature: -20° to +60°C.* At shaft diameter 6 mm and 10 mm, the key size is not like DIN 6885. - [Bevel gearbox type HUG, type B, i=1:1 SKU: 41000100](https://maedler.in/product/bevel-gearbox-type-hug-type-b-i11-sku-41000100/): General: Miniaturised right-angle drives for light duty. Suitable for manual and short term drive applications. Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion and high rigidity. Two counter-bored clearance holes for conventional chassis mounting and a tapped insert below each shaft for vertical mounting. Gearing: Straight cut gears, max. backlash 2°. Ratio i = 1 : 1. Shaft diamter 4mm. Maximum speed 1000 rpm. Gearbox and bearing lubricated for life. Product No. 410 000 00, Version A: Hardened steel gears bonded to ground and hardened steel shafts. Sintered bronze bearing system. Electrical insulation between shafts and housing. Max. torque 0.68 Nm. Weight: 0.041 kg. Product No. 410 001 00, Version B: Polyacetal gears moulded onto ground and hardened steel shafts. Sintered bronze bearing system. Electrical insulation between input/output shaft and between shafts and housing. Max. torque 0.11 Nm. Weight: 0.037 kg. - [Bevel gearbox type HUG, type A, i=1:1 SKU: 41000000](https://maedler.in/product/bevel-gearbox-type-hug-type-a-i11-sku-41000000/): General: Miniaturised right-angle drives for light duty. Suitable for manual and short term drive applications. Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion and high rigidity. Two counter-bored clearance holes for conventional chassis mounting and a tapped insert below each shaft for vertical mounting. Gearing: Straight cut gears, max. backlash 2°. Ratio i = 1 : 1. Shaft diamter 4mm. Maximum speed 1000 rpm. Gearbox and bearing lubricated for life. Product No. 410 000 00, Version A: Hardened steel gears bonded to ground and hardened steel shafts. Sintered bronze bearing system. Electrical insulation between shafts and housing. Max. torque 0.68 Nm. Weight: 0.041 kg. Product No. 410 001 00, Version B: Polyacetal gears moulded onto ground and hardened steel shafts. Sintered bronze bearing system. Electrical insulation between input/output shaft and between shafts and housing. Max. torque 0.11 Nm. Weight: 0.037 kg. - [Bevel gear made of stainless steel 1.4305 module 4 60 teeth i=4:1 SKU: 36199893](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-60-teeth-i41-sku-36199893/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 15 teeth i=4:1 SKU: 36199892](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-15-teeth-i41-sku-36199892/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 48 teeth i=3:1 SKU: 36199881](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-48-teeth-i31-sku-36199881/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 16 teeth i=3:1 SKU: 36199880](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-16-teeth-i31-sku-36199880/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 30 teeth i=2:1 SKU: 36199857](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-30-teeth-i21-sku-36199857/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 15 teeth i=2:1 SKU: 36199856](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-15-teeth-i21-sku-36199856/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 4 16 teeth i=1:1 SKU: 36199807](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-4-16-teeth-i11-sku-36199807/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 60 teeth i=4:1 SKU: 36199493](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-60-teeth-i41-sku-36199493/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 15 teeth i=4:1 SKU: 36199492](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-15-teeth-i41-sku-36199492/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 48 teeth i=3:1 SKU: 36199481](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-48-teeth-i31-sku-36199481/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 16 teeth i=3:1 SKU: 36199480](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-16-teeth-i31-sku-36199480/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 30 teeth i=2:1 SKU: 36199457](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-30-teeth-i21-sku-36199457/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 15 teeth i=2:1 SKU: 36199456](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-15-teeth-i21-sku-36199456/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 3 16 teeth i=1:1 SKU: 36199407](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-3-16-teeth-i11-sku-36199407/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 60 teeth i=4:1 SKU: 36199193](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-60-teeth-i41-sku-36199193/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 15 teeth i=4:1 SKU: 36199192](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-15-teeth-i41-sku-36199192/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 48 teeth i=3:1 SKU: 36199181](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-48-teeth-i31-sku-36199181/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 16 teeth i=3:1 SKU: 36199180](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-16-teeth-i31-sku-36199180/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 30 teeth i=2:1 SKU: 36199157](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-30-teeth-i21-sku-36199157/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 15 teeth i=2:1 SKU: 36199156](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-15-teeth-i21-sku-36199156/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2.5 16 teeth i=1:1 SKU: 36199107](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-5-16-teeth-i11-sku-36199107/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 60 teeth i=4:1 SKU: 36199093](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-60-teeth-i41-sku-36199093/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 15 teeth i=4:1 SKU: 36199092](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-15-teeth-i41-sku-36199092/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 48 teeth i=3:1 SKU: 36199081](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-48-teeth-i31-sku-36199081/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 16 teeth i=3:1 SKU: 36199080](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-16-teeth-i31-sku-36199080/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Bevel gear made of stainless steel 1.4305 module 2 30 teeth i=2:1 SKU: 36199057](https://maedler.in/product/bevel-gear-made-of-stainless-steel-1-4305-module-2-30-teeth-i21-sku-36199057/): Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modelled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 50 teeth material steel SKU: 10525000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-50-teeth-material-steel-sku-10525000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 48 teeth material steel SKU: 10524800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-48-teeth-material-steel-sku-10524800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 46 teeth material steel SKU: 10524600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-46-teeth-material-steel-sku-10524600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 45 teeth material steel SKU: 10524500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-45-teeth-material-steel-sku-10524500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 44 teeth material steel SKU: 10524400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-44-teeth-material-steel-sku-10524400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 42 teeth material steel SKU: 10524200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-42-teeth-material-steel-sku-10524200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 40 teeth material steel SKU: 10524000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-40-teeth-material-steel-sku-10524000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 38 teeth material steel SKU: 10523800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-38-teeth-material-steel-sku-10523800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 36 teeth material steel SKU: 10523600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-36-teeth-material-steel-sku-10523600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 35 teeth material steel SKU: 10523500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-35-teeth-material-steel-sku-10523500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 34 teeth material steel SKU: 10523400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-34-teeth-material-steel-sku-10523400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 32 teeth material steel SKU: 10523200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-32-teeth-material-steel-sku-10523200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 30 teeth material steel SKU: 10523000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-30-teeth-material-steel-sku-10523000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 29 teeth material steel SKU: 10522900](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-29-teeth-material-steel-sku-10522900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 28 teeth material steel SKU: 10522800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-28-teeth-material-steel-sku-10522800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 27 teeth material steel SKU: 10522700](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-27-teeth-material-steel-sku-10522700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 26 teeth material steel SKU: 10522600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-26-teeth-material-steel-sku-10522600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 25 teeth material steel SKU: 10522500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-25-teeth-material-steel-sku-10522500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 24 teeth material steel SKU: 10522400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-24-teeth-material-steel-sku-10522400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 23 teeth material steel SKU: 10522300](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-23-teeth-material-steel-sku-10522300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 22 teeth material steel SKU: 10522200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-22-teeth-material-steel-sku-10522200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 21 teeth material steel SKU: 10522100](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-21-teeth-material-steel-sku-10522100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 20 teeth material steel SKU: 10522000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-20-teeth-material-steel-sku-10522000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 19 teeth material steel SKU: 10521900](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-19-teeth-material-steel-sku-10521900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 18 teeth material steel SKU: 10521800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-18-teeth-material-steel-sku-10521800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 17 teeth material steel SKU: 10521700](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-17-teeth-material-steel-sku-10521700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 16 teeth material steel SKU: 10521600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-16-teeth-material-steel-sku-10521600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 15 teeth material steel SKU: 10521500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-15-teeth-material-steel-sku-10521500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 14 teeth material steel SKU: 10521400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-14-teeth-material-steel-sku-10521400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 13 teeth material steel SKU: 10521300](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-13-teeth-material-steel-sku-10521300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 12 teeth material steel SKU: 10521200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-12-teeth-material-steel-sku-10521200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 11 teeth material steel SKU: 10521100](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-11-teeth-material-steel-sku-10521100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 10 teeth material steel SKU: 10521000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-10-teeth-material-steel-sku-10521000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 9 teeth material steel SKU: 10520900](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-9-teeth-material-steel-sku-10520900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 8 teeth material steel SKU: 10520800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-8-teeth-material-steel-sku-10520800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 114 teeth material cast iron SKU: 10518800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-114-teeth-material-cast-iron-sku-10518800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 95 teeth material cast iron SKU: 10518300](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-95-teeth-material-cast-iron-sku-10518300/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 76 teeth material cast iron SKU: 10517600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-76-teeth-material-cast-iron-sku-10517600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 57 teeth material cast iron SKU: 10515700](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-57-teeth-material-cast-iron-sku-10515700/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 45 teeth material cast iron SKU: 10514500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-45-teeth-material-cast-iron-sku-10514500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 40 teeth material steel SKU: 10514000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-40-teeth-material-steel-sku-10514000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 38 teeth material steel SKU: 10513800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-38-teeth-material-steel-sku-10513800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 36 teeth material steel SKU: 10513600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-36-teeth-material-steel-sku-10513600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 35 teeth material steel SKU: 10513500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-35-teeth-material-steel-sku-10513500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 34 teeth material steel SKU: 10513400](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-34-teeth-material-steel-sku-10513400/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 32 teeth material steel SKU: 10513200](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-32-teeth-material-steel-sku-10513200/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 30 teeth material steel SKU: 10513000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-30-teeth-material-steel-sku-10513000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 29 teeth material steel SKU: 10512900](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-29-teeth-material-steel-sku-10512900/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 28 teeth material steel SKU: 10512800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-28-teeth-material-steel-sku-10512800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 27 teeth material steel SKU: 10512700](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-27-teeth-material-steel-sku-10512700/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 26 teeth material steel SKU: 10512600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-26-teeth-material-steel-sku-10512600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 25 teeth material steel SKU: 10512500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-25-teeth-material-steel-sku-10512500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 24 teeth material steel SKU: 10512400](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-24-teeth-material-steel-sku-10512400/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 23 teeth material steel SKU: 10512300](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-23-teeth-material-steel-sku-10512300/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 22 teeth material steel SKU: 10512200](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-22-teeth-material-steel-sku-10512200/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 21 teeth material steel SKU: 10512100](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-21-teeth-material-steel-sku-10512100/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 20 teeth material steel SKU: 10512000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-20-teeth-material-steel-sku-10512000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 19 teeth material steel SKU: 10511900](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-19-teeth-material-steel-sku-10511900/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 18 teeth material steel SKU: 10511800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-18-teeth-material-steel-sku-10511800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 17 teeth material steel SKU: 10511700](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-17-teeth-material-steel-sku-10511700/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 16 teeth material steel SKU: 10511600](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-16-teeth-material-steel-sku-10511600/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 15 teeth material steel SKU: 10511500](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-15-teeth-material-steel-sku-10511500/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 14 teeth material steel SKU: 10511400](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-14-teeth-material-steel-sku-10511400/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 13 teeth material steel SKU: 10511300](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-13-teeth-material-steel-sku-10511300/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 12 teeth material steel SKU: 10511200](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-12-teeth-material-steel-sku-10511200/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 11 teeth material steel SKU: 10511100](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-11-teeth-material-steel-sku-10511100/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 10 teeth material steel SKU: 10511000](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-10-teeth-material-steel-sku-10511000/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 9 teeth material steel SKU: 10510900](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-9-teeth-material-steel-sku-10510900/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRS with hub 08 B-1 1/2x5/16" 8 teeth material steel SKU: 10510800](https://maedler.in/product/sprocket-krs-with-hub-08-b-1-1-2x5-16-8-teeth-material-steel-sku-10510800/): Material: Steel C45. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399130](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399125](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399123](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399121](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399120](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399119](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399118](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399117](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399116](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399115](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399113](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 083 1/2x3/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10399112](https://maedler.in/product/sprocket-krr-with-hub-083-1-2x3-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10399112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 4.5 mm, c = 1.3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 25 teeth material polyacetal resin SKU: 10352500](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-25-teeth-material-polyacetal-resin-sku-10352500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 23 teeth material polyacetal resin SKU: 10352300](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-23-teeth-material-polyacetal-resin-sku-10352300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 21 teeth material polyacetal resin SKU: 10352100](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-21-teeth-material-polyacetal-resin-sku-10352100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 19 teeth material polyacetal resin SKU: 10351900](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-19-teeth-material-polyacetal-resin-sku-10351900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 17 teeth material polyacetal resin SKU: 10351700](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-17-teeth-material-polyacetal-resin-sku-10351700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 15 teeth material polyacetal resin SKU: 10351500](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-15-teeth-material-polyacetal-resin-sku-10351500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 083 1/2 X 3/16" 13 teeth material polyacetal resin SKU: 10351300](https://maedler.in/product/sprocket-krk-with-hub-083-1-2-x-3-16-13-teeth-material-polyacetal-resin-sku-10351300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 4 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 114 teeth material steel SKU: 10328800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-114-teeth-material-steel-sku-10328800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 90 teeth material steel SKU: 10328200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-90-teeth-material-steel-sku-10328200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 80 teeth material steel SKU: 10328000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-80-teeth-material-steel-sku-10328000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 76 teeth material steel SKU: 10327600](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-76-teeth-material-steel-sku-10327600/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 72 teeth material steel SKU: 10327200](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-72-teeth-material-steel-sku-10327200/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 70 teeth material steel SKU: 10327000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-70-teeth-material-steel-sku-10327000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 65 teeth material steel SKU: 10326500](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-65-teeth-material-steel-sku-10326500/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 60 teeth material steel SKU: 10326000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-60-teeth-material-steel-sku-10326000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 57 teeth material steel SKU: 10325700](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-57-teeth-material-steel-sku-10325700/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 54 teeth material steel SKU: 10325400](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-54-teeth-material-steel-sku-10325400/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 50 teeth material steel SKU: 10325000](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-50-teeth-material-steel-sku-10325000/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 083 1/2x3/16" 48 teeth material steel SKU: 10324800](https://maedler.in/product/plate-wheel-krl-without-hub-083-1-2x3-16-48-teeth-material-steel-sku-10324800/): Material: Low-carbon steel, not hardable. Pre-bored. From a Teeth Number of 90 reinforced (H = 6 mm, see drawing). General dimensions: B1 = 4,5 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Shoulder screw similar to ISO 7379 ø10f9-M8-65mm steel tensile strength class 12.9 SKU: 619710065](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-65mm-steel-tensile-strength-class-12-9-sku-619710065/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-60mm steel tensile strength class 12.9 SKU: 619710060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-60mm-steel-tensile-strength-class-12-9-sku-619710060/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-55mm steel tensile strength class 12.9 SKU: 619710055](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-55mm-steel-tensile-strength-class-12-9-sku-619710055/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-50mm steel tensile strength class 12.9 SKU: 619710050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-50mm-steel-tensile-strength-class-12-9-sku-619710050/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-45mm steel tensile strength class 12.9 SKU: 619710045](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-45mm-steel-tensile-strength-class-12-9-sku-619710045/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-40mm steel tensile strength class 12.9 SKU: 619710040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-40mm-steel-tensile-strength-class-12-9-sku-619710040/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-35mm steel tensile strength class 12.9 SKU: 619710035](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-35mm-steel-tensile-strength-class-12-9-sku-619710035/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-30mm steel tensile strength class 12.9 SKU: 619710030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-30mm-steel-tensile-strength-class-12-9-sku-619710030/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-25mm steel tensile strength class 12.9 SKU: 619710025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-25mm-steel-tensile-strength-class-12-9-sku-619710025/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-20mm steel tensile strength class 12.9 SKU: 619710020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-20mm-steel-tensile-strength-class-12-9-sku-619710020/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-16mm steel tensile strength class 12.9 SKU: 619710016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-16mm-steel-tensile-strength-class-12-9-sku-619710016/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-100mm steel tensile strength class 12.9 SKU: 619708100](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-100mm-steel-tensile-strength-class-12-9-sku-619708100/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-90mm steel tensile strength class 12.9 SKU: 619708090](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-90mm-steel-tensile-strength-class-12-9-sku-619708090/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-80mm steel tensile strength class 12.9 SKU: 619708080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-80mm-steel-tensile-strength-class-12-9-sku-619708080/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-70mm steel tensile strength class 12.9 SKU: 619708070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-70mm-steel-tensile-strength-class-12-9-sku-619708070/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-65mm steel tensile strength class 12.9 SKU: 619708065](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-65mm-steel-tensile-strength-class-12-9-sku-619708065/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-60mm steel tensile strength class 12.9 SKU: 619708060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-60mm-steel-tensile-strength-class-12-9-sku-619708060/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-55mm steel tensile strength class 12.9 SKU: 619708055](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-55mm-steel-tensile-strength-class-12-9-sku-619708055/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-50mm steel tensile strength class 12.9 SKU: 619708050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-50mm-steel-tensile-strength-class-12-9-sku-619708050/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-45mm steel tensile strength class 12.9 SKU: 619708045](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-45mm-steel-tensile-strength-class-12-9-sku-619708045/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-40mm steel tensile strength class 12.9 SKU: 619708040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-40mm-steel-tensile-strength-class-12-9-sku-619708040/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-35mm steel tensile strength class 12.9 SKU: 619708035](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-35mm-steel-tensile-strength-class-12-9-sku-619708035/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-30mm steel tensile strength class 12.9 SKU: 619708030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-30mm-steel-tensile-strength-class-12-9-sku-619708030/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-25mm steel tensile strength class 12.9 SKU: 619708025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-25mm-steel-tensile-strength-class-12-9-sku-619708025/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-20mm steel tensile strength class 12.9 SKU: 619708020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-20mm-steel-tensile-strength-class-12-9-sku-619708020/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-16mm steel tensile strength class 12.9 SKU: 619708016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-16mm-steel-tensile-strength-class-12-9-sku-619708016/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-80mm steel tensile strength class 12.9 SKU: 619706080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-80mm-steel-tensile-strength-class-12-9-sku-619706080/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-70mm steel tensile strength class 12.9 SKU: 619706070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-70mm-steel-tensile-strength-class-12-9-sku-619706070/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-65mm steel tensile strength class 12.9 SKU: 619706065](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-65mm-steel-tensile-strength-class-12-9-sku-619706065/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-60mm steel tensile strength class 12.9 SKU: 619706060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-60mm-steel-tensile-strength-class-12-9-sku-619706060/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-55mm steel tensile strength class 12.9 SKU: 619706055](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-55mm-steel-tensile-strength-class-12-9-sku-619706055/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-50mm steel tensile strength class 12.9 SKU: 619706050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-50mm-steel-tensile-strength-class-12-9-sku-619706050/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-45mm steel tensile strength class 12.9 SKU: 619706045](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-45mm-steel-tensile-strength-class-12-9-sku-619706045/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-40mm steel tensile strength class 12.9 SKU: 619706040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-40mm-steel-tensile-strength-class-12-9-sku-619706040/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-35mm steel tensile strength class 12.9 SKU: 619706035](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-35mm-steel-tensile-strength-class-12-9-sku-619706035/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-30mm steel tensile strength class 12.9 SKU: 619706030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-30mm-steel-tensile-strength-class-12-9-sku-619706030/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-25mm steel tensile strength class 12.9 SKU: 619706025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-25mm-steel-tensile-strength-class-12-9-sku-619706025/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-20mm steel tensile strength class 12.9 SKU: 619706020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-20mm-steel-tensile-strength-class-12-9-sku-619706020/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-16mm steel tensile strength class 12.9 SKU: 619706016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-16mm-steel-tensile-strength-class-12-9-sku-619706016/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-12mm steel tensile strength class 12.9 SKU: 619706012](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-12mm-steel-tensile-strength-class-12-9-sku-619706012/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-10mm steel tensile strength class 12.9 SKU: 619706010](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-10mm-steel-tensile-strength-class-12-9-sku-619706010/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-40mm steel tensile strength class 12.9 SKU: 619705040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-40mm-steel-tensile-strength-class-12-9-sku-619705040/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-30mm steel tensile strength class 12.9 SKU: 619705030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-30mm-steel-tensile-strength-class-12-9-sku-619705030/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-25mm steel tensile strength class 12.9 SKU: 619705025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-25mm-steel-tensile-strength-class-12-9-sku-619705025/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-20mm steel tensile strength class 12.9 SKU: 619705020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-20mm-steel-tensile-strength-class-12-9-sku-619705020/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-16mm steel tensile strength class 12.9 SKU: 619705016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-16mm-steel-tensile-strength-class-12-9-sku-619705016/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-12mm steel tensile strength class 12.9 SKU: 619705012](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-12mm-steel-tensile-strength-class-12-9-sku-619705012/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-10mm steel tensile strength class 12.9 SKU: 619705010](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-10mm-steel-tensile-strength-class-12-9-sku-619705010/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-8mm steel tensile strength class 12.9 SKU: 619705008](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-8mm-steel-tensile-strength-class-12-9-sku-619705008/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-6mm steel tensile strength class 12.9 SKU: 619705006](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-6mm-steel-tensile-strength-class-12-9-sku-619705006/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-5mm steel tensile strength class 12.9 SKU: 619705005](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-5mm-steel-tensile-strength-class-12-9-sku-619705005/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-30mm steel tensile strength class 12.9 SKU: 619704030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-30mm-steel-tensile-strength-class-12-9-sku-619704030/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-25mm steel tensile strength class 12.9 SKU: 619704025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-25mm-steel-tensile-strength-class-12-9-sku-619704025/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-20mm steel tensile strength class 12.9 SKU: 619704020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-20mm-steel-tensile-strength-class-12-9-sku-619704020/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-16mm steel tensile strength class 12.9 SKU: 619704016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-16mm-steel-tensile-strength-class-12-9-sku-619704016/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-12mm steel tensile strength class 12.9 SKU: 619704012](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-12mm-steel-tensile-strength-class-12-9-sku-619704012/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-10mm steel tensile strength class 12.9 SKU: 619704010](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-10mm-steel-tensile-strength-class-12-9-sku-619704010/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-8mm steel tensile strength class 12.9 SKU: 619704008](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-8mm-steel-tensile-strength-class-12-9-sku-619704008/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-6mm steel tensile strength class 12.9 SKU: 619704006](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-6mm-steel-tensile-strength-class-12-9-sku-619704006/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-5mm steel tensile strength class 12.9 SKU: 619704005](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-5mm-steel-tensile-strength-class-12-9-sku-619704005/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-4mm steel tensile strength class 12.9 SKU: 619704004](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-4mm-steel-tensile-strength-class-12-9-sku-619704004/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M12 x 30mm SKU: 61951230](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m12-x-30mm-sku-61951230/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M12 x 20mm SKU: 61951220](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m12-x-20mm-sku-61951220/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M10 x 30mm SKU: 61951030](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m10-x-30mm-sku-61951030/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M10 x 20mm SKU: 61951020](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m10-x-20mm-sku-61951020/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M10 x 16mm SKU: 61951016](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m10-x-16mm-sku-61951016/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M10 x 10mm SKU: 61951010](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m10-x-10mm-sku-61951010/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M8 x 30mm SKU: 61950830](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m8-x-30mm-sku-61950830/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M8 x 25mm SKU: 61950825](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m8-x-25mm-sku-61950825/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M8 x 20mm SKU: 61950820](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m8-x-20mm-sku-61950820/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M8 x 16mm SKU: 61950816](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m8-x-16mm-sku-61950816/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M8 x 12mm SKU: 61950812](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m8-x-12mm-sku-61950812/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M8 x 10mm SKU: 61950810](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m8-x-10mm-sku-61950810/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M8 x 8mm SKU: 61950808](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m8-x-8mm-sku-61950808/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M6 x 20mm SKU: 61950620](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m6-x-20mm-sku-61950620/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M6 x 16mm SKU: 61950616](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m6-x-16mm-sku-61950616/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M6 x 12mm SKU: 61950612](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m6-x-12mm-sku-61950612/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M6 x 10mm SKU: 61950610](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m6-x-10mm-sku-61950610/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M6 x 8mm SKU: 61950608](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m6-x-8mm-sku-61950608/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M6 x 6mm SKU: 61950606](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m6-x-6mm-sku-61950606/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M5 x 10mm SKU: 61950510](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m5-x-10mm-sku-61950510/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M5 x 8mm SKU: 61950508](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m5-x-8mm-sku-61950508/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M5 x 6mm SKU: 61950506](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m5-x-6mm-sku-61950506/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M5 x 5mm SKU: 61950505](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m5-x-5mm-sku-61950505/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M4 x 20mm SKU: 61950420](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m4-x-20mm-sku-61950420/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M4 x 16mm SKU: 61950416](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m4-x-16mm-sku-61950416/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M4 x 12mm SKU: 61950412](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m4-x-12mm-sku-61950412/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M4 x 10mm SKU: 61950410](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m4-x-10mm-sku-61950410/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M4 x 8mm SKU: 61950408](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m4-x-8mm-sku-61950408/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M4 x 6mm SKU: 61950406](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m4-x-6mm-sku-61950406/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) stainless steel A2 M4 x 5mm SKU: 61950405](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-stainless-steel-a2-m4-x-5mm-sku-61950405/): Material: Stainless steel A2.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M12 x 30mm SKU: 61941230](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m12-x-30mm-sku-61941230/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M12 x 25mm SKU: 61941225](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m12-x-25mm-sku-61941225/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M12 x 20mm SKU: 61941220](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m12-x-20mm-sku-61941220/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M12 x 16mm SKU: 61941216](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m12-x-16mm-sku-61941216/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M12 x 12mm SKU: 61941212](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m12-x-12mm-sku-61941212/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M10 x 30mm SKU: 61941030](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m10-x-30mm-sku-61941030/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M10 x 25mm SKU: 61941025](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m10-x-25mm-sku-61941025/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M10 x 20mm SKU: 61941020](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m10-x-20mm-sku-61941020/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Hexagon socket set screw with cup point ISO 4029 (ex DIN 916) steel 45H M10 x 16mm SKU: 61941016](https://maedler.in/product/hexagon-socket-set-screw-with-cup-point-iso-4029-ex-din-916-steel-45h-m10-x-16mm-sku-61941016/): Material: Steel, black oxide finish, hardness class 45 H.Set screws with cup point (dimension dz).To use as a grub screw for fixing an element on a shaft.On unhardened shafts, the cup point enables a medium high retaining force. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109514](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-180mm-thread-m12-sku-42109514/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109513](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-180mm-thread-m12-sku-42109513/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109512](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-130mm-thread-m10-sku-42109512/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109511](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-130mm-thread-m10-sku-42109511/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 130mm Thread M10 SKU: 42109510](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-130mm-thread-m10-sku-42109510/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 110mm Thread M8 SKU: 42109509](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-110mm-thread-m8-sku-42109509/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 110mm Thread M8 SKU: 42109508](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-110mm-thread-m8-sku-42109508/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 95mm Thread M8 SKU: 42109507](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-95mm-thread-m8-sku-42109507/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 95mm Thread M8 SKU: 42109506](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-95mm-thread-m8-sku-42109506/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 80mm Thread M6 SKU: 42109505](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-80mm-thread-m6-sku-42109505/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 80mm Thread M6 SKU: 42109504](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-80mm-thread-m6-sku-42109504/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 60mm Thread M6 SKU: 42109503](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-60mm-thread-m6-sku-42109503/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 14x 30mm Centre-Ø 60mm Thread M5 SKU: 42109502](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14x-30mm-centre-o-60mm-thread-m5-sku-42109502/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 50 consisting of coupling and flange with fixing screws for shaft-Ø 11x 23mm Centre-Ø 60mm Thread M5 SKU: 42109501](https://maedler.in/product/motor-adaptation-zm-s-size-50-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-11x-23mm-centre-o-60mm-thread-m5-sku-42109501/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 130mm Thread M10 SKU: 42109410](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-130mm-thread-m10-sku-42109410/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 110mm Thread M8 SKU: 42109409](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-110mm-thread-m8-sku-42109409/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 110mm Thread M8 SKU: 42109408](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-110mm-thread-m8-sku-42109408/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 95mm Thread M8 SKU: 42109407](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-95mm-thread-m8-sku-42109407/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 80mm Thread M6 SKU: 42109406](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-80mm-thread-m6-sku-42109406/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 80mm Thread M6 SKU: 42109405](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-80mm-thread-m6-sku-42109405/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 60mm Thread M6 SKU: 42109404](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-60mm-thread-m6-sku-42109404/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 14 x 30mm Centre-Ø 60mm Thread M5 SKU: 42109403](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-14-x-30mm-centre-o-60mm-thread-m5-sku-42109403/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 11x 23mm Centre-Ø 60mm Thread M5 SKU: 42109402](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-11x-23mm-centre-o-60mm-thread-m5-sku-42109402/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 40 consisting of coupling and flange with fixing screws for shaft-Ø 9 x 20mm Centre-Ø 40mm Thread M5 SKU: 42109401](https://maedler.in/product/motor-adaptation-zm-s-size-40-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-9-x-20mm-centre-o-40mm-thread-m5-sku-42109401/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Servo worm gear unit ZM/S size 80 i=39:1 output shaft with shrink disk side 6 SKU: 42108117](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i391-output-shaft-with-shrink-disk-side-6-sku-42108117/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=39:1 output shaft with shrink disk side 5 SKU: 42108116](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i391-output-shaft-with-shrink-disk-side-5-sku-42108116/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=27:1 output shaft with shrink disk side 6 SKU: 42108113](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i271-output-shaft-with-shrink-disk-side-6-sku-42108113/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=27:1 output shaft with shrink disk side 5 SKU: 42108112](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i271-output-shaft-with-shrink-disk-side-5-sku-42108112/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=16:1 output shaft with shrink disk side 6 SKU: 42108109](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i161-output-shaft-with-shrink-disk-side-6-sku-42108109/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=16:1 output shaft with shrink disk side 5 SKU: 42108108](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i161-output-shaft-with-shrink-disk-side-5-sku-42108108/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=10:1 output shaft with shrink disk side 6 SKU: 42108105](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i101-output-shaft-with-shrink-disk-side-6-sku-42108105/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=10:1 output shaft with shrink disk side 5 SKU: 42108104](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i101-output-shaft-with-shrink-disk-side-5-sku-42108104/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=6,4:1 output shaft with shrink disk side 6 SKU: 42108103](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i641-output-shaft-with-shrink-disk-side-6-sku-42108103/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=6,4:1 output shaft with shrink disk side 5 SKU: 42108102](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i641-output-shaft-with-shrink-disk-side-5-sku-42108102/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=4:1 output shaft with shrink disk side 6 SKU: 42108101](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i41-output-shaft-with-shrink-disk-side-6-sku-42108101/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 80 i=4:1 output shaft with shrink disk side 5 SKU: 42108100](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-80-i41-output-shaft-with-shrink-disk-side-5-sku-42108100/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=39:1 output shaft with shrink disk side 6 SKU: 42106117](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i391-output-shaft-with-shrink-disk-side-6-sku-42106117/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=39:1 output shaft with shrink disk side 5 SKU: 42106116](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i391-output-shaft-with-shrink-disk-side-5-sku-42106116/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=27:1 output shaft with shrink disk side 6 SKU: 42106113](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i271-output-shaft-with-shrink-disk-side-6-sku-42106113/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=27:1 output shaft with shrink disk side 5 SKU: 42106112](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i271-output-shaft-with-shrink-disk-side-5-sku-42106112/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=16:1 output shaft with shrink disk side 6 SKU: 42106109](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i161-output-shaft-with-shrink-disk-side-6-sku-42106109/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=16:1 output shaft with shrink disk side 5 SKU: 42106108](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i161-output-shaft-with-shrink-disk-side-5-sku-42106108/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=10:1 output shaft with shrink disk side 6 SKU: 42106105](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i101-output-shaft-with-shrink-disk-side-6-sku-42106105/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=10:1 output shaft with shrink disk side 5 SKU: 42106104](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i101-output-shaft-with-shrink-disk-side-5-sku-42106104/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=6,4:1 output shaft with shrink disk side 6 SKU: 42106103](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i641-output-shaft-with-shrink-disk-side-6-sku-42106103/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=6,4:1 output shaft with shrink disk side 5 SKU: 42106102](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i641-output-shaft-with-shrink-disk-side-5-sku-42106102/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=4:1 output shaft with shrink disk side 6 SKU: 42106101](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i41-output-shaft-with-shrink-disk-side-6-sku-42106101/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 63 i=4:1 output shaft with shrink disk side 5 SKU: 42106100](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-63-i41-output-shaft-with-shrink-disk-side-5-sku-42106100/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=39:1 output shaft with shrink disk side 6 SKU: 42105117](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i391-output-shaft-with-shrink-disk-side-6-sku-42105117/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=39:1 output shaft with shrink disk side 5 SKU: 42105116](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i391-output-shaft-with-shrink-disk-side-5-sku-42105116/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=27:1 output shaft with shrink disk side 6 SKU: 42105113](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i271-output-shaft-with-shrink-disk-side-6-sku-42105113/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=27:1 output shaft with shrink disk side 5 SKU: 42105112](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i271-output-shaft-with-shrink-disk-side-5-sku-42105112/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=16:1 output shaft with shrink disk side 6 SKU: 42105109](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i161-output-shaft-with-shrink-disk-side-6-sku-42105109/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=16:1 output shaft with shrink disk side 5 SKU: 42105108](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i161-output-shaft-with-shrink-disk-side-5-sku-42105108/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=10:1 output shaft with shrink disk side 6 SKU: 42105105](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i101-output-shaft-with-shrink-disk-side-6-sku-42105105/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=10:1 output shaft with shrink disk side 5 SKU: 42105104](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i101-output-shaft-with-shrink-disk-side-5-sku-42105104/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=6,4:1 output shaft with shrink disk side 6 SKU: 42105103](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i641-output-shaft-with-shrink-disk-side-6-sku-42105103/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=6,4:1 output shaft with shrink disk side 5 SKU: 42105102](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i641-output-shaft-with-shrink-disk-side-5-sku-42105102/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=4:1 output shaft with shrink disk side 6 SKU: 42105101](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i41-output-shaft-with-shrink-disk-side-6-sku-42105101/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 50 i=4:1 output shaft with shrink disk side 5 SKU: 42105100](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-50-i41-output-shaft-with-shrink-disk-side-5-sku-42105100/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=39:1 output shaft with shrink disk side 6 SKU: 42104117](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i391-output-shaft-with-shrink-disk-side-6-sku-42104117/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=39:1 output shaft with shrink disk side 5 SKU: 42104116](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i391-output-shaft-with-shrink-disk-side-5-sku-42104116/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=27:1 output shaft with shrink disk side 6 SKU: 42104113](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i271-output-shaft-with-shrink-disk-side-6-sku-42104113/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=27:1 output shaft with shrink disk side 5 SKU: 42104112](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i271-output-shaft-with-shrink-disk-side-5-sku-42104112/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=16:1 output shaft with shrink disk side 6 SKU: 42104109](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i161-output-shaft-with-shrink-disk-side-6-sku-42104109/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=16:1 output shaft with shrink disk side 5 SKU: 42104108](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i161-output-shaft-with-shrink-disk-side-5-sku-42104108/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=10:1 output shaft with shrink disk side 6 SKU: 42104105](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i101-output-shaft-with-shrink-disk-side-6-sku-42104105/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=10:1 output shaft with shrink disk side 5 SKU: 42104104](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i101-output-shaft-with-shrink-disk-side-5-sku-42104104/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=6,4:1 output shaft with shrink disk side 6 SKU: 42104103](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i641-output-shaft-with-shrink-disk-side-6-sku-42104103/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=6,4:1 output shaft with shrink disk side 5 SKU: 42104102](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i641-output-shaft-with-shrink-disk-side-5-sku-42104102/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=4:1 output shaft with shrink disk side 6 SKU: 42104101](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i41-output-shaft-with-shrink-disk-side-6-sku-42104101/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max. without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Servo worm gear unit ZM/S size 40 i=4:1 output shaft with shrink disk side 5 SKU: 42104100](https://maedler.in/product/servo-worm-gear-unit-zm-s-size-40-i41-output-shaft-with-shrink-disk-side-5-sku-42104100/): These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application.General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C.Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides.Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin.Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft.Self-locking: The servo worm gear unit isn‘t self-locking.Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force.Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required.Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated.Delivery: 2 products have to be ordered:- the servo worm gear unit with shrink disc on the output side 5 or 6.- the motor adaptation with coupling, flange and fixing screws.1) permittable output torque T2 zul. under consideration of thermal limits.2) maximum output torque T2 max.without consideration of the permissible torque of the coupling and the output side shrink disk.3) with a service life of 12.000 hours and continuous operating S1 at 1.500 min-1. - [Worm gear unit G/II version B centre distance 33mm i=75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42017500](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42017500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=56:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42015600](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i561-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42015600/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=38:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42013800](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i381-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42013800/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=32:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42013200](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i321-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42013200/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=30:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42013000](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i301-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42013000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=24:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42012400](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i241-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42012400/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=20:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42012000](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i201-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42012000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=17:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42011700](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i171-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42011700/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=15:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42011500](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i151-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42011500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=11.33 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42011100](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i11-33-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42011100/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version B centre distance 33mm i=7:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42010700](https://maedler.in/product/worm-gear-unit-g-ii-version-b-centre-distance-33mm-i71-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42010700/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 150 N, Axial = 100 N). - [Worm gear unit G/II version A centre distance 31mm i=75:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42007500](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i751-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42007500/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=50:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42005000](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i501-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42005000/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit G/II version A centre distance 31mm i=38:1 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42003800](https://maedler.in/product/worm-gear-unit-g-ii-version-a-centre-distance-31mm-i381-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42003800/): Housing: Aluminium permanent-mould casting, fully sealed against oil leaks and protected against dust, can be mounted in any position. Gear set: Worms hardened and ground, worm gears made from special bronze. Bearing System: Input and output shaft with roller bearing. Lubrication: As a special gearbox oil has been used, in most applications no relubrication or change is required. Input shaft is the smaller shaft d1. The permiss. output torque refers to shaft d2. Load Bearing Capacity of the Output Shaft Radial = 100 N, Axial = 60 N. - [Worm gear unit KES 30 version B center distance 30mm ratio 64:1 output hollow shaft 14mm SKU: 42003064B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-641-output-hollow-shaft-14mm-sku-42003064b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 64:1 output hollow shaft 14mm SKU: 42003064](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-641-output-hollow-shaft-14mm-sku-42003064/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 45:1 output hollow shaft 14mm SKU: 42003045B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-451-output-hollow-shaft-14mm-sku-42003045b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 45:1 output hollow shaft 14mm SKU: 42003045](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-451-output-hollow-shaft-14mm-sku-42003045/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 34:1 output hollow shaft 14mm SKU: 42003034B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-341-output-hollow-shaft-14mm-sku-42003034b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 34:1 output hollow shaft 14mm SKU: 42003034](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-341-output-hollow-shaft-14mm-sku-42003034/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 25:1 output hollow shaft 14mm SKU: 42003025B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-251-output-hollow-shaft-14mm-sku-42003025b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 25:1 output hollow shaft 14mm SKU: 42003025](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-251-output-hollow-shaft-14mm-sku-42003025/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 20:1 output hollow shaft 14mm SKU: 42003020B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-201-output-hollow-shaft-14mm-sku-42003020b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 20:1 output hollow shaft 14mm SKU: 42003020](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-201-output-hollow-shaft-14mm-sku-42003020/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 17:1 output hollow shaft 14mm SKU: 42003017B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-171-output-hollow-shaft-14mm-sku-42003017b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 17:1 output hollow shaft 14mm SKU: 42003017](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-171-output-hollow-shaft-14mm-sku-42003017/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version B center distance 30mm ratio 10:1 output hollow shaft 14mm SKU: 42003010B](https://maedler.in/product/worm-gear-unit-kes-30-version-b-center-distance-30mm-ratio-101-output-hollow-shaft-14mm-sku-42003010b/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Worm gear unit KES 30 version A center distance 30mm ratio 10:1 output hollow shaft 14mm SKU: 42003010](https://maedler.in/product/worm-gear-unit-kes-30-version-a-center-distance-30mm-ratio-101-output-hollow-shaft-14mm-sku-42003010/): Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.One size with center distance 30mm, in 8 ratios.Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust.Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.Gearing: Worm from steel, wheel from special brass. Bearing: Ball bearings with rubber seal RS.Lubrication: Maintenance free grease lubrication. Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.Life time: 1,000 hours at max. performance at speed 500 min-1 and operating time 20%. Permiss. operating temperature: -20° to +60°C. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581515](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581514](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581512](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581428](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581425](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581422](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581422/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581420](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581420/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581419](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581419/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581418](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581418/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581416](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581416/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581415](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581415/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581414](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581414/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 14 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581412](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-14-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581412/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581328](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581325](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581324](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581324/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581322](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581322/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581320](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581320/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581318](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581318/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581316](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581316/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581315](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581315/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581314](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581314/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 13 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581312](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-13-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581312/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581225](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581224](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581224/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581222](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581222/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581220](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581220/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581219](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581219/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581218](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581218/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581216](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581216/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581215](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581215/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581214](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581214/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581212](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581212/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581119](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581119/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581118](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581118/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581116](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581116/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581115](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581115/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581114](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581114/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581112](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581112/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581016](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581016/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581015](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581015/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581014](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581014/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 10 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581012](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-10-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581012/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRTG 08 B-1 1/2x5/16" 30 teeth material steel teeth hardened for taper bush type 2012 SKU: 10578130](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10578130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 28 teeth material steel teeth hardened for taper bush type 2012 SKU: 10578128](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10578128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 27 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578127](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 26 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578126](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 25 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578125](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 24 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578124](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 23 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578123](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 22 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578122](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 21 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578121](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 20 teeth material steel teeth hardened for taper bush type 1610 SKU: 10578120](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10578120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 19 teeth material steel teeth hardened for taper bush type 1210 SKU: 10578119](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10578119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 18 teeth material steel teeth hardened for taper bush type 1210 SKU: 10578118](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10578118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 17 teeth material steel teeth hardened for taper bush type 1210 SKU: 10578117](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10578117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 16 teeth material steel teeth hardened for taper bush type 1108 SKU: 10578116](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-1108-sku-10578116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 08 B-1 1/2x5/16" 15 teeth material steel teeth hardened for taper bush type 1008 SKU: 10578115](https://maedler.in/product/sprocket-krtg-08-b-1-1-2x5-16-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10578115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 114 teeth material cast iron for taper bush type 2517 SKU: 10577188G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-114-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10577188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 95 teeth material cast iron for taper bush type 2012 SKU: 10577183G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-95-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10577183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 76 teeth material cast iron for taper bush type 2012 SKU: 10577176G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-76-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10577176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 76 teeth material steel for taper bush type 2012 SKU: 10577176](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-76-teeth-material-steel-for-taper-bush-type-2012-sku-10577176/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 57 teeth material cast iron for taper bush type 2012 SKU: 10577157G](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-57-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10577157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 57 teeth material steel for taper bush type 2012 SKU: 10577157](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-57-teeth-material-steel-for-taper-bush-type-2012-sku-10577157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 45 teeth material steel for taper bush type 2012 SKU: 10577145](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-45-teeth-material-steel-for-taper-bush-type-2012-sku-10577145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 38 teeth material steel for taper bush type 2012 SKU: 10577138](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-38-teeth-material-steel-for-taper-bush-type-2012-sku-10577138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 30 teeth material steel for taper bush type 2012 SKU: 10577130](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-30-teeth-material-steel-for-taper-bush-type-2012-sku-10577130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 28 teeth material steel for taper bush type 2012 SKU: 10577128](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-28-teeth-material-steel-for-taper-bush-type-2012-sku-10577128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 27 teeth material steel for taper bush type 1610 SKU: 10577127](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-27-teeth-material-steel-for-taper-bush-type-1610-sku-10577127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 26 teeth material steel for taper bush type 1610 SKU: 10577126](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-26-teeth-material-steel-for-taper-bush-type-1610-sku-10577126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 25 teeth material steel for taper bush type 1610 SKU: 10577125](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-25-teeth-material-steel-for-taper-bush-type-1610-sku-10577125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 24 teeth material steel for taper bush type 1610 SKU: 10577124](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-24-teeth-material-steel-for-taper-bush-type-1610-sku-10577124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 23 teeth material steel for taper bush type 1610 SKU: 10577123](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-23-teeth-material-steel-for-taper-bush-type-1610-sku-10577123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 22 teeth material steel for taper bush type 1610 SKU: 10577122](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-22-teeth-material-steel-for-taper-bush-type-1610-sku-10577122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 21 teeth material steel for taper bush type 1610 SKU: 10577121](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-21-teeth-material-steel-for-taper-bush-type-1610-sku-10577121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 20 teeth material steel for taper bush type 1610 SKU: 10577120](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-20-teeth-material-steel-for-taper-bush-type-1610-sku-10577120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 19 teeth material steel for taper bush type 1210 SKU: 10577119](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-19-teeth-material-steel-for-taper-bush-type-1210-sku-10577119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 18 teeth material steel for taper bush type 1210 SKU: 10577118](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-18-teeth-material-steel-for-taper-bush-type-1210-sku-10577118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 17 teeth material steel for taper bush type 1210 SKU: 10577117](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-17-teeth-material-steel-for-taper-bush-type-1210-sku-10577117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 16 teeth material steel for taper bush type 1108 SKU: 10577116](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-16-teeth-material-steel-for-taper-bush-type-1108-sku-10577116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 15 teeth material steel for taper bush type 1008 SKU: 10577115](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-15-teeth-material-steel-for-taper-bush-type-1008-sku-10577115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 08 B-1 1/2x5/16" 14 teeth material steel for taper bush type 1008 SKU: 10577114](https://maedler.in/product/sprocket-krt-08-b-1-1-2x5-16-14-teeth-material-steel-for-taper-bush-type-1008-sku-10577114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprocket 10577188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 25 teeth material polyacetal resin SKU: 10552500](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-25-teeth-material-polyacetal-resin-sku-10552500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 23 teeth material polyacetal resin SKU: 10552300](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-23-teeth-material-polyacetal-resin-sku-10552300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 21 teeth material polyacetal resin SKU: 10552100](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-21-teeth-material-polyacetal-resin-sku-10552100/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 19 teeth material polyacetal resin SKU: 10551900](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-19-teeth-material-polyacetal-resin-sku-10551900/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 17 teeth material polyacetal resin SKU: 10551700](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-17-teeth-material-polyacetal-resin-sku-10551700/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 15 teeth material polyacetal resin SKU: 10551500](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-15-teeth-material-polyacetal-resin-sku-10551500/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRK with hub 08 B-1 1/2 X 5/16" 13 teeth material polyacetal resin SKU: 10551300](https://maedler.in/product/sprocket-krk-with-hub-08-b-1-1-2-x-5-16-13-teeth-material-polyacetal-resin-sku-10551300/): Bores ISO H8. Metal inlays at the hub with custom bore, feather keyways or threads for set screw available on request, depending on the amount and size ordered. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 120 teeth material steel SKU: 10529000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-120-teeth-material-steel-sku-10529000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 114 teeth material steel SKU: 10528800](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-114-teeth-material-steel-sku-10528800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 95 teeth material steel SKU: 10528300](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-95-teeth-material-steel-sku-10528300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 80 teeth material steel SKU: 10528000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-80-teeth-material-steel-sku-10528000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 76 teeth material steel SKU: 10527600](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-76-teeth-material-steel-sku-10527600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 72 teeth material steel SKU: 10527200](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-72-teeth-material-steel-sku-10527200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 70 teeth material steel SKU: 10527000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-70-teeth-material-steel-sku-10527000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 65 teeth material steel SKU: 10526500](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-65-teeth-material-steel-sku-10526500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 60 teeth material steel SKU: 10526000](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-60-teeth-material-steel-sku-10526000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 57 teeth material steel SKU: 10525700](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-57-teeth-material-steel-sku-10525700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 08 B-1 1/2x5/16" 54 teeth material steel SKU: 10525400](https://maedler.in/product/plate-wheel-krl-without-hub-08-b-1-1-2x5-16-54-teeth-material-steel-sku-10525400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Shoulder screw similar to ISO 7379 ø12f9-M10-40mm stainless steel 1.4301 SKU: 619812040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-40mm-stainless-steel-1-4301-sku-619812040/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-30mm stainless steel 1.4301 SKU: 619812030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-30mm-stainless-steel-1-4301-sku-619812030/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-25mm stainless steel 1.4301 SKU: 619812025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-25mm-stainless-steel-1-4301-sku-619812025/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-20mm stainless steel 1.4301 SKU: 619812020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-20mm-stainless-steel-1-4301-sku-619812020/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-16mm stainless steel 1.4301 SKU: 619812016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-16mm-stainless-steel-1-4301-sku-619812016/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-100mm stainless steel 1.4301 SKU: 619810100](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-100mm-stainless-steel-1-4301-sku-619810100/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-90mm stainless steel 1.4301 SKU: 619810090](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-90mm-stainless-steel-1-4301-sku-619810090/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-80mm stainless steel 1.4301 SKU: 619810080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-80mm-stainless-steel-1-4301-sku-619810080/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-70mm stainless steel 1.4301 SKU: 619810070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-70mm-stainless-steel-1-4301-sku-619810070/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-60mm stainless steel 1.4301 SKU: 619810060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-60mm-stainless-steel-1-4301-sku-619810060/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-50mm stainless steel 1.4301 SKU: 619810050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-50mm-stainless-steel-1-4301-sku-619810050/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-40mm stainless steel 1.4301 SKU: 619810040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-40mm-stainless-steel-1-4301-sku-619810040/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-30mm stainless steel 1.4301 SKU: 619810030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-30mm-stainless-steel-1-4301-sku-619810030/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-25mm stainless steel 1.4301 SKU: 619810025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-25mm-stainless-steel-1-4301-sku-619810025/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-20mm stainless steel 1.4301 SKU: 619810020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-20mm-stainless-steel-1-4301-sku-619810020/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-16mm stainless steel 1.4301 SKU: 619810016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-16mm-stainless-steel-1-4301-sku-619810016/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-60mm stainless steel 1.4301 SKU: 619808060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-60mm-stainless-steel-1-4301-sku-619808060/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-50mm stainless steel 1.4301 SKU: 619808050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-50mm-stainless-steel-1-4301-sku-619808050/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-40mm stainless steel 1.4301 SKU: 619808040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-40mm-stainless-steel-1-4301-sku-619808040/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-30mm stainless steel 1.4301 SKU: 619808030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-30mm-stainless-steel-1-4301-sku-619808030/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-25mm stainless steel 1.4301 SKU: 619808025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-25mm-stainless-steel-1-4301-sku-619808025/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-20mm stainless steel 1.4301 SKU: 619808020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-20mm-stainless-steel-1-4301-sku-619808020/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø8f9-M6-16mm stainless steel 1.4301 SKU: 619808016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o8f9-m6-16mm-stainless-steel-1-4301-sku-619808016/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-60mm stainless steel 1.4301 SKU: 619806060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-60mm-stainless-steel-1-4301-sku-619806060/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-50mm stainless steel 1.4301 SKU: 619806050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-50mm-stainless-steel-1-4301-sku-619806050/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-40mm stainless steel 1.4301 SKU: 619806040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-40mm-stainless-steel-1-4301-sku-619806040/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-30mm stainless steel 1.4301 SKU: 619806030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-30mm-stainless-steel-1-4301-sku-619806030/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-25mm stainless steel 1.4301 SKU: 619806025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-25mm-stainless-steel-1-4301-sku-619806025/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-20mm stainless steel 1.4301 SKU: 619806020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-20mm-stainless-steel-1-4301-sku-619806020/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-16mm stainless steel 1.4301 SKU: 619806016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-16mm-stainless-steel-1-4301-sku-619806016/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-12mm stainless steel 1.4301 SKU: 619806012](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-12mm-stainless-steel-1-4301-sku-619806012/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø6f9-M5-10mm stainless steel 1.4301 SKU: 619806010](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o6f9-m5-10mm-stainless-steel-1-4301-sku-619806010/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-30mm stainless steel 1.4301 SKU: 619805030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-30mm-stainless-steel-1-4301-sku-619805030/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-25mm stainless steel 1.4301 SKU: 619805025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-25mm-stainless-steel-1-4301-sku-619805025/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-20mm stainless steel 1.4301 SKU: 619805020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-20mm-stainless-steel-1-4301-sku-619805020/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-16mm stainless steel 1.4301 SKU: 619805016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-16mm-stainless-steel-1-4301-sku-619805016/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-12mm stainless steel 1.4301 SKU: 619805012](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-12mm-stainless-steel-1-4301-sku-619805012/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-10mm stainless steel 1.4301 SKU: 619805010](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-10mm-stainless-steel-1-4301-sku-619805010/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-8mm stainless steel 1.4301 SKU: 619805008](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-8mm-stainless-steel-1-4301-sku-619805008/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-6mm stainless steel 1.4301 SKU: 619805006](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-6mm-stainless-steel-1-4301-sku-619805006/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø5f9-M4-5mm stainless steel 1.4301 SKU: 619805005](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o5f9-m4-5mm-stainless-steel-1-4301-sku-619805005/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-16mm stainless steel 1.4301 SKU: 619804016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-16mm-stainless-steel-1-4301-sku-619804016/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-12mm stainless steel 1.4301 SKU: 619804012](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-12mm-stainless-steel-1-4301-sku-619804012/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-10mm stainless steel 1.4301 SKU: 619804010](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-10mm-stainless-steel-1-4301-sku-619804010/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-8mm stainless steel 1.4301 SKU: 619804008](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-8mm-stainless-steel-1-4301-sku-619804008/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-6mm stainless steel 1.4301 SKU: 619804006](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-6mm-stainless-steel-1-4301-sku-619804006/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-5mm stainless steel 1.4301 SKU: 619804005](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-5mm-stainless-steel-1-4301-sku-619804005/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø4f9-M3-4mm stainless steel 1.4301 SKU: 619804004](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o4f9-m3-4mm-stainless-steel-1-4301-sku-619804004/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø24f9-M20-100mm steel tensile strength class 12.9 SKU: 619724100](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o24f9-m20-100mm-steel-tensile-strength-class-12-9-sku-619724100/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø24f9-M20-90mm steel tensile strength class 12.9 SKU: 619724090](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o24f9-m20-90mm-steel-tensile-strength-class-12-9-sku-619724090/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø24f9-M20-80mm steel tensile strength class 12.9 SKU: 619724080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o24f9-m20-80mm-steel-tensile-strength-class-12-9-sku-619724080/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø24f9-M20-70mm steel tensile strength class 12.9 SKU: 619724070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o24f9-m20-70mm-steel-tensile-strength-class-12-9-sku-619724070/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø24f9-M20-65mm steel tensile strength class 12.9 SKU: 619724065](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o24f9-m20-65mm-steel-tensile-strength-class-12-9-sku-619724065/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø24f9-M20-60mm steel tensile strength class 12.9 SKU: 619724060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o24f9-m20-60mm-steel-tensile-strength-class-12-9-sku-619724060/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø24f9-M20-55mm steel tensile strength class 12.9 SKU: 619724055](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o24f9-m20-55mm-steel-tensile-strength-class-12-9-sku-619724055/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø24f9-M20-50mm steel tensile strength class 12.9 SKU: 619724050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o24f9-m20-50mm-steel-tensile-strength-class-12-9-sku-619724050/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-100mm steel tensile strength class 12.9 SKU: 619720100](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-100mm-steel-tensile-strength-class-12-9-sku-619720100/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-90mm steel tensile strength class 12.9 SKU: 619720090](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-90mm-steel-tensile-strength-class-12-9-sku-619720090/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-80mm steel tensile strength class 12.9 SKU: 619720080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-80mm-steel-tensile-strength-class-12-9-sku-619720080/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-70mm steel tensile strength class 12.9 SKU: 619720070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-70mm-steel-tensile-strength-class-12-9-sku-619720070/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-65mm steel tensile strength class 12.9 SKU: 619720065](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-65mm-steel-tensile-strength-class-12-9-sku-619720065/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-60mm steel tensile strength class 12.9 SKU: 619720060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-60mm-steel-tensile-strength-class-12-9-sku-619720060/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-55mm steel tensile strength class 12.9 SKU: 619720055](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-55mm-steel-tensile-strength-class-12-9-sku-619720055/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-50mm steel tensile strength class 12.9 SKU: 619720050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-50mm-steel-tensile-strength-class-12-9-sku-619720050/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-45mm steel tensile strength class 12.9 SKU: 619720045](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-45mm-steel-tensile-strength-class-12-9-sku-619720045/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-40mm steel tensile strength class 12.9 SKU: 619720040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-40mm-steel-tensile-strength-class-12-9-sku-619720040/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-35mm steel tensile strength class 12.9 SKU: 619720035](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-35mm-steel-tensile-strength-class-12-9-sku-619720035/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø20f9-M16-30mm steel tensile strength class 12.9 SKU: 619720030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o20f9-m16-30mm-steel-tensile-strength-class-12-9-sku-619720030/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-100mm steel tensile strength class 12.9 SKU: 619716100](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-100mm-steel-tensile-strength-class-12-9-sku-619716100/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-90mm steel tensile strength class 12.9 SKU: 619716090](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-90mm-steel-tensile-strength-class-12-9-sku-619716090/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-80mm steel tensile strength class 12.9 SKU: 619716080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-80mm-steel-tensile-strength-class-12-9-sku-619716080/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-70mm steel tensile strength class 12.9 SKU: 619716070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-70mm-steel-tensile-strength-class-12-9-sku-619716070/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-65mm steel tensile strength class 12.9 SKU: 619716065](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-65mm-steel-tensile-strength-class-12-9-sku-619716065/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-60mm steel tensile strength class 12.9 SKU: 619716060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-60mm-steel-tensile-strength-class-12-9-sku-619716060/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-55mm steel tensile strength class 12.9 SKU: 619716055](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-55mm-steel-tensile-strength-class-12-9-sku-619716055/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-50mm steel tensile strength class 12.9 SKU: 619716050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-50mm-steel-tensile-strength-class-12-9-sku-619716050/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-45mm steel tensile strength class 12.9 SKU: 619716045](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-45mm-steel-tensile-strength-class-12-9-sku-619716045/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-40mm steel tensile strength class 12.9 SKU: 619716040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-40mm-steel-tensile-strength-class-12-9-sku-619716040/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-35mm steel tensile strength class 12.9 SKU: 619716035](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-35mm-steel-tensile-strength-class-12-9-sku-619716035/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-30mm steel tensile strength class 12.9 SKU: 619716030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-30mm-steel-tensile-strength-class-12-9-sku-619716030/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-25mm steel tensile strength class 12.9 SKU: 619716025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-25mm-steel-tensile-strength-class-12-9-sku-619716025/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-100mm steel tensile strength class 12.9 SKU: 619712100](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-100mm-steel-tensile-strength-class-12-9-sku-619712100/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-90mm steel tensile strength class 12.9 SKU: 619712090](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-90mm-steel-tensile-strength-class-12-9-sku-619712090/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-80mm steel tensile strength class 12.9 SKU: 619712080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-80mm-steel-tensile-strength-class-12-9-sku-619712080/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-70mm steel tensile strength class 12.9 SKU: 619712070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-70mm-steel-tensile-strength-class-12-9-sku-619712070/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-65mm steel tensile strength class 12.9 SKU: 619712065](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-65mm-steel-tensile-strength-class-12-9-sku-619712065/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-60mm steel tensile strength class 12.9 SKU: 619712060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-60mm-steel-tensile-strength-class-12-9-sku-619712060/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-55mm steel tensile strength class 12.9 SKU: 619712055](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-55mm-steel-tensile-strength-class-12-9-sku-619712055/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-50mm steel tensile strength class 12.9 SKU: 619712050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-50mm-steel-tensile-strength-class-12-9-sku-619712050/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-45mm steel tensile strength class 12.9 SKU: 619712045](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-45mm-steel-tensile-strength-class-12-9-sku-619712045/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-40mm steel tensile strength class 12.9 SKU: 619712040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-40mm-steel-tensile-strength-class-12-9-sku-619712040/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-35mm steel tensile strength class 12.9 SKU: 619712035](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-35mm-steel-tensile-strength-class-12-9-sku-619712035/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-30mm steel tensile strength class 12.9 SKU: 619712030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-30mm-steel-tensile-strength-class-12-9-sku-619712030/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-25mm steel tensile strength class 12.9 SKU: 619712025](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-25mm-steel-tensile-strength-class-12-9-sku-619712025/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-20mm steel tensile strength class 12.9 SKU: 619712020](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-20mm-steel-tensile-strength-class-12-9-sku-619712020/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-16mm steel tensile strength class 12.9 SKU: 619712016](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-16mm-steel-tensile-strength-class-12-9-sku-619712016/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-100mm steel tensile strength class 12.9 SKU: 619710100](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-100mm-steel-tensile-strength-class-12-9-sku-619710100/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-90mm steel tensile strength class 12.9 SKU: 619710090](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-90mm-steel-tensile-strength-class-12-9-sku-619710090/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-80mm steel tensile strength class 12.9 SKU: 619710080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-80mm-steel-tensile-strength-class-12-9-sku-619710080/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø10f9-M8-70mm steel tensile strength class 12.9 SKU: 619710070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o10f9-m8-70mm-steel-tensile-strength-class-12-9-sku-619710070/): Material: Steel strength 12.9, partially black oxide finish. Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard bolt with strength 12.9 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Standard three phase motor SM/I 230/400V 50Hz 3.0kW ca. 2910 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43003100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3-0kw-ca-2910-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 2910 rpm size 90 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43003000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-2910-rpm-size-90-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 2900 rpm size 90 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-2900-rpm-size-90-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 2890 rpm size 80 model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-2890-rpm-size-80-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 2890 rpm size 80 model B5 efficiency class IE3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-2890-rpm-size-80-model-b5-efficiency-class-ie3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-are/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 2840 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-2840-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 2820 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-2820-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 2840 rpm size 63 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43002400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-2840-rpm-size-63-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 2930 rpm size 132 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43001300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-2930-rpm-size-132-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4.0kW ca. 2920 rpm size 112 M-T model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43001200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4-0kw-ca-2920-rpm-size-112-m-t-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-ww/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3.0kW ca. 2910 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43001100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3-0kw-ca-2910-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 2910 rpm size 90 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43001000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-2910-rpm-size-90-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 2900 rpm size 90 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-2900-rpm-size-90-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 2890 rpm size 80 model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-2890-rpm-size-80-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 2890 rpm size 80 model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-2890-rpm-size-80-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 2840 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-2840-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 2820 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-2820-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 2840 rpm size 63 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43000400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-2840-rpm-size-63-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Worm gear unit H/I size 75 i=65:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207565](https://maedler.in/product/worm-gear-unit-h-i-size-75-i651-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207565/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 75 i=50:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207550](https://maedler.in/product/worm-gear-unit-h-i-size-75-i501-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207550/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 75 i=30:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207530](https://maedler.in/product/worm-gear-unit-h-i-size-75-i301-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207530/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 75 i=20:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207520](https://maedler.in/product/worm-gear-unit-h-i-size-75-i201-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207520/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [worm gear unit H/I size 75 i=15:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207515](https://maedler.in/product/worm-gear-unit-h-i-size-75-i151-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207515/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [worm gear unit H/I size 75 i=100:1 output shaft hollow shaft diameter 28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207511](https://maedler.in/product/worm-gear-unit-h-i-size-75-i1001-output-shaft-hollow-shaft-diameter-28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207511/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 75 i=7.5:1 output shaft as hollow shaft Ø28mm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42207507](https://maedler.in/product/worm-gear-unit-h-i-size-75-i7-51-output-shaft-as-hollow-shaft-o28mm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42207507/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft both-sided for worm gear unit H/I size 75 diameter 28mm overall length 244mm SKU: 42207502](https://maedler.in/product/output-shaft-both-sided-for-worm-gear-unit-h-i-size-75-diameter-28mm-overall-length-244mm-sku-42207502/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 75 diameter 28mm overall length 183mm SKU: 42207501](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-75-diameter-28mm-overall-length-183mm-sku-42207501/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Worm gear unit H/I size 63 i=80:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206380](https://maedler.in/product/worm-gear-unit-h-i-size-63-i801-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206380/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=65:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206365](https://maedler.in/product/worm-gear-unit-h-i-size-63-i651-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206365/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=50:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206350](https://maedler.in/product/worm-gear-unit-h-i-size-63-i501-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206350/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=40:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206340](https://maedler.in/product/worm-gear-unit-h-i-size-63-i401-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206340/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=30:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206330](https://maedler.in/product/worm-gear-unit-h-i-size-63-i301-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206330/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=25:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206325](https://maedler.in/product/worm-gear-unit-h-i-size-63-i251-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206325/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=20:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206320](https://maedler.in/product/worm-gear-unit-h-i-size-63-i201-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206320/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=15:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206315](https://maedler.in/product/worm-gear-unit-h-i-size-63-i151-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206315/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=100:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206311](https://maedler.in/product/worm-gear-unit-h-i-size-63-i1001-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206311/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=10:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206310](https://maedler.in/product/worm-gear-unit-h-i-size-63-i101-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206310/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 63 i=7.5:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42206307](https://maedler.in/product/worm-gear-unit-h-i-size-63-i7-51-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42206307/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft double-sided for Worm gear unit H/I size 63 diameter 25mm overall length 216mm SKU: 42206302](https://maedler.in/product/output-shaft-double-sided-for-worm-gear-unit-h-i-size-63-diameter-25mm-overall-length-216mm-sku-42206302/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 63 diameter 25mm overall length 165mm SKU: 42206301](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-63-diameter-25mm-overall-length-165mm-sku-42206301/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Worm gear unit H/I size 50 i=80:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205080](https://maedler.in/product/worm-gear-unit-h-i-size-50-i801-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205080/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=65:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205065](https://maedler.in/product/worm-gear-unit-h-i-size-50-i651-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205065/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=50:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205050](https://maedler.in/product/worm-gear-unit-h-i-size-50-i501-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205050/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=40:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205040](https://maedler.in/product/worm-gear-unit-h-i-size-50-i401-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205040/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=30:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205030](https://maedler.in/product/worm-gear-unit-h-i-size-50-i301-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205030/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=25:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205025](https://maedler.in/product/worm-gear-unit-h-i-size-50-i251-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205025/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=20:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205020](https://maedler.in/product/worm-gear-unit-h-i-size-50-i201-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205020/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=15:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205015](https://maedler.in/product/worm-gear-unit-h-i-size-50-i151-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205015/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=100:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205011](https://maedler.in/product/worm-gear-unit-h-i-size-50-i1001-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205011/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=10:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205010](https://maedler.in/product/worm-gear-unit-h-i-size-50-i101-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205010/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 50 i=7.5:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42205007](https://maedler.in/product/worm-gear-unit-h-i-size-50-i7-51-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42205007/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft double-sided for Worm gear unit H/I size 50 diameter 25mm overall length 196 7mm SKU: 42205002](https://maedler.in/product/output-shaft-double-sided-for-worm-gear-unit-h-i-size-50-diameter-25mm-overall-length-196-7mm-sku-42205002/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 50 diameter 25mm overall length 143,5mm SKU: 42205001](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-50-diameter-25mm-overall-length-1435mm-sku-42205001/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Worm gear unit H/I size 40 i=80:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204080](https://maedler.in/product/worm-gear-unit-h-i-size-40-i801-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204080/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=65:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204065](https://maedler.in/product/worm-gear-unit-h-i-size-40-i651-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204065/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=50:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204050](https://maedler.in/product/worm-gear-unit-h-i-size-40-i501-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204050/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=40:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204040](https://maedler.in/product/worm-gear-unit-h-i-size-40-i401-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204040/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=30:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204030](https://maedler.in/product/worm-gear-unit-h-i-size-40-i301-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204030/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=25:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204025](https://maedler.in/product/worm-gear-unit-h-i-size-40-i251-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204025/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=20:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204020](https://maedler.in/product/worm-gear-unit-h-i-size-40-i201-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204020/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=15:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204015](https://maedler.in/product/worm-gear-unit-h-i-size-40-i151-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204015/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=100:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204011](https://maedler.in/product/worm-gear-unit-h-i-size-40-i1001-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204011/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=10:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204010](https://maedler.in/product/worm-gear-unit-h-i-size-40-i101-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204010/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 40 i=7.5:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42204007](https://maedler.in/product/worm-gear-unit-h-i-size-40-i7-51-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42204007/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft double-sided for Worm gear unit H/I size 40 diameter 18mm overall length 161mm SKU: 42204002](https://maedler.in/product/output-shaft-double-sided-for-worm-gear-unit-h-i-size-40-diameter-18mm-overall-length-161mm-sku-42204002/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 40 diameter 18mm overall length 120mm SKU: 42204001](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-40-diameter-18mm-overall-length-120mm-sku-42204001/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Worm gear unit H/I size 31 i=80:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203180](https://maedler.in/product/worm-gear-unit-h-i-size-31-i801-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203180/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=65:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203165](https://maedler.in/product/worm-gear-unit-h-i-size-31-i651-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203165/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=50:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203150](https://maedler.in/product/worm-gear-unit-h-i-size-31-i501-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203150/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=40:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203140](https://maedler.in/product/worm-gear-unit-h-i-size-31-i401-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203140/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=30:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203130](https://maedler.in/product/worm-gear-unit-h-i-size-31-i301-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203130/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=25:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203125](https://maedler.in/product/worm-gear-unit-h-i-size-31-i251-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203125/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=20:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203120](https://maedler.in/product/worm-gear-unit-h-i-size-31-i201-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203120/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=15:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203115](https://maedler.in/product/worm-gear-unit-h-i-size-31-i151-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203115/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=100:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203111](https://maedler.in/product/worm-gear-unit-h-i-size-31-i1001-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203111/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=10:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203110](https://maedler.in/product/worm-gear-unit-h-i-size-31-i101-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203110/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Worm gear unit H/I size 31 i=7.5:1 output shaft as hollow shaft (For operating instructions please visit the download area of our website www.maedler.de) SKU: 42203107](https://maedler.in/product/worm-gear-unit-h-i-size-31-i7-51-output-shaft-as-hollow-shaft-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-42203107/): Housing: Aluminium die-cast, with connecting threads on both input and output sides. With mounting holes on all other sides. Worm shaft: hardened and ground. Worm Gear: Bronze, on cast iron hub. Lubrication: synthetic oil (lubricated for life). Lightweight, high quality model range, 5 sizes, centre distance 31.5, 40, 50, 63 and 75 mm. Size 90 and 110 on request. The gearboxes can be used without ventilation and independent from the mounting position. Output shaft push-in type: The basic gearbox version has a hollow shaft. They can, however, also be supplied with a push in type output shaft (single sided, to be used left and right, or double sided). These output shafts have their own product No. and have to be ordered separately. - [Output shaft double-sided for Worm gear unit H/I size 31 diameter 14mm overall length 126mm SKU: 42203102](https://maedler.in/product/output-shaft-double-sided-for-worm-gear-unit-h-i-size-31-diameter-14mm-overall-length-126mm-sku-42203102/): Material: Steel. To change the gearboxes H/I over from hollow shaft to doublesided solid shaft. The shaft is only pushed in and secured with the enclosed retaining ring. - [Output shaft single-sided for Worm gear unit H/I size 31 diameter 14mm overall length 95mm SKU: 42203101](https://maedler.in/product/output-shaft-single-sided-for-worm-gear-unit-h-i-size-31-diameter-14mm-overall-length-95mm-sku-42203101/): Material: Steel. To change the gearboxes H/I over from hollow shaft to solid shaft. The shaft is only pushed in and secured with the enclosed cover disc and mounting screw. The shaft can be pushed in either left or right. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 38 x 80mm Centre-Ø 180mm Thread M12 SKU: 42109812](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-38-x-80mm-centre-o-180mm-thread-m12-sku-42109812/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109811](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-180mm-thread-m12-sku-42109811/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109810](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-180mm-thread-m12-sku-42109810/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 180mm Thread M12 SKU: 42109809](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-180mm-thread-m12-sku-42109809/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109808](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-130mm-thread-m10-sku-42109808/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109807](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-130mm-thread-m10-sku-42109807/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 130mm Thread M10 SKU: 42109806](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-130mm-thread-m10-sku-42109806/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 110mm Thread M8 SKU: 42109805](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-110mm-thread-m8-sku-42109805/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 110mm Thread M8 SKU: 42109804](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-110mm-thread-m8-sku-42109804/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 95mm Thread M8 SKU: 42109803](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-95mm-thread-m8-sku-42109803/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 95mm Thread M8 SKU: 42109802](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-95mm-thread-m8-sku-42109802/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 80 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 80mm Thread M6 SKU: 42109801](https://maedler.in/product/motor-adaptation-zm-s-size-80-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-80mm-thread-m6-sku-42109801/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 38 x 80mm Centre-Ø 180mm Thread M12 SKU: 42109609](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-38-x-80mm-centre-o-180mm-thread-m12-sku-42109609/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109608](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-180mm-thread-m12-sku-42109608/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 180mm Thread M12 SKU: 42109607](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-180mm-thread-m12-sku-42109607/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 32 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109606](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-32-x-58mm-centre-o-130mm-thread-m10-sku-42109606/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 28 x 58mm Centre-Ø 130mm Thread M10 SKU: 42109605](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-28-x-58mm-centre-o-130mm-thread-m10-sku-42109605/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 130mm Thread M10 SKU: 42109604](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-130mm-thread-m10-sku-42109604/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 24 x 50mm Centre-Ø 110mm Thread M8 SKU: 42109603](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-24-x-50mm-centre-o-110mm-thread-m8-sku-42109603/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 95mm Thread M8 SKU: 42109602](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-95mm-thread-m8-sku-42109602/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Motor adaptation ZM/S size 63 consisting of coupling and flange with fixing screws for shaft-Ø 19 x 40mm Centre-Ø 80mm Thread M6 SKU: 42109601](https://maedler.in/product/motor-adaptation-zm-s-size-63-consisting-of-coupling-and-flange-with-fixing-screws-for-shaft-o-19-x-40mm-centre-o-80mm-thread-m6-sku-42109601/): Material: Aluminium. Coupling spider from polyurethane.Mounting flange and backlash-free compensating coupling in clamp style (without keyway) with Shore hardness 64°D for mounting a motor to the servo worm gearbox ZM/S. A selection of flanges and ready-to-install couplings for various motor sizes and shaft diameters is listed for each gearbox size. The four fastening screws for mounting the flange to the gearbox are included in the scope of delivery. Other dimensions on request.D = Diameter motor shaft.L = Length of the motor shaft.The motor adaption has to be ordered seperately, additional to the gear box unit. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582338](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582335](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582332](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582330](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582328](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582325](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582324](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582324/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582322](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582322/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582320](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582320/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 23 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582319](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-23-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582319/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582238](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582235](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582232](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582230](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582228](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582225](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582224](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582224/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582222](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582222/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582220](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582220/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582219](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582219/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582218](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582218/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 22 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582216](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-22-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582216/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582138](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582135](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582132](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582130](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582125](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582122](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582122/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582120](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582120/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582119](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582119/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582118](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582118/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 21 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582116](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-21-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582116/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582038](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582035](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582032](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582030](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582028](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582028/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582025](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582024](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582024/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582022](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582022/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582020](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582020/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582019](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582019/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582018](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582018/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 20 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582016](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-20-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582016/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581938](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581935](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581935/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581932](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581932/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581930](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581930/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581928](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581928/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581925](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581925/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581924](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581924/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581922](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581922/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581920](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581920/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581919](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581919/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581918](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581918/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 19 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581916](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-19-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581916/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581838](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581838/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581835](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581835/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581832](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581832/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581830](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581830/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581828](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581828/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581825](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581825/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581824](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581824/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581822](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581822/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581820](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581820/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581819](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581819/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581818](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581818/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 18 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581816](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-18-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581816/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581732](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581732/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581730](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581730/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581728](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581728/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581725](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581725/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581724](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581724/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581722](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581722/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581720](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581720/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581719](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581719/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581718](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581718/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581716](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581716/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 17 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581715](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-17-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581715/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581632](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581632/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581630](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581630/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581628](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581628/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581625](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581625/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581624](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581624/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581622](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581622/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581620](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581620/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581619](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581619/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581618](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581618/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581616](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581616/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 16 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581615](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-16-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581615/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581532](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581530](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581528](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581525](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581524](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581524/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581522](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581522/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581520](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581519](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581518](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10581516](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10581516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Shim ring DIN 988 05 x 10 x 0,25 material steel DC01 C590 SKU: 624305103](https://maedler.in/product/shim-ring-din-988-05-x-10-x-025-material-steel-dc01-c590-sku-624305103/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 05 x 10 x 0,2 material steel DC01 C590 SKU: 624305102](https://maedler.in/product/shim-ring-din-988-05-x-10-x-02-material-steel-dc01-c590-sku-624305102/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 05 x 10 x 0,15 material steel DC01 C590 SKU: 624305101](https://maedler.in/product/shim-ring-din-988-05-x-10-x-015-material-steel-dc01-c590-sku-624305101/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 05 x 10 x 0,1 material steel DC01 C590 SKU: 624305100](https://maedler.in/product/shim-ring-din-988-05-x-10-x-01-material-steel-dc01-c590-sku-624305100/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 04 x 08 x 1 material steel DC01 C590 SKU: 624304086](https://maedler.in/product/shim-ring-din-988-04-x-08-x-1-material-steel-dc01-c590-sku-624304086/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 04 x 08 x 0,5 material steel DC01 C590 SKU: 624304085](https://maedler.in/product/shim-ring-din-988-04-x-08-x-05-material-steel-dc01-c590-sku-624304085/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 04 x 08 x 0,3 material steel DC01 C590 SKU: 624304084](https://maedler.in/product/shim-ring-din-988-04-x-08-x-03-material-steel-dc01-c590-sku-624304084/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 04 x 08 x 0,2 material steel DC01 C590 SKU: 624304082](https://maedler.in/product/shim-ring-din-988-04-x-08-x-02-material-steel-dc01-c590-sku-624304082/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 04 x 08 x 0,15 material steel DC01 C590 SKU: 624304081](https://maedler.in/product/shim-ring-din-988-04-x-08-x-015-material-steel-dc01-c590-sku-624304081/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 04 x 08 x 0,1 material steel DC01 C590 SKU: 624304080](https://maedler.in/product/shim-ring-din-988-04-x-08-x-01-material-steel-dc01-c590-sku-624304080/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 03 x 06 x 1 material steel DC01 C590 SKU: 624303066](https://maedler.in/product/shim-ring-din-988-03-x-06-x-1-material-steel-dc01-c590-sku-624303066/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 03 x 06 x 0,5 material steel DC01 C590 SKU: 624303065](https://maedler.in/product/shim-ring-din-988-03-x-06-x-05-material-steel-dc01-c590-sku-624303065/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 03 x 06 x 0,3 material steel DC01 C590 SKU: 624303064](https://maedler.in/product/shim-ring-din-988-03-x-06-x-03-material-steel-dc01-c590-sku-624303064/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 03 x 06 x 0,25 material steel DC01 C590 SKU: 624303063](https://maedler.in/product/shim-ring-din-988-03-x-06-x-025-material-steel-dc01-c590-sku-624303063/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 03 x 06 x 0,2 material steel DC01 C590 SKU: 624303062](https://maedler.in/product/shim-ring-din-988-03-x-06-x-02-material-steel-dc01-c590-sku-624303062/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 03 x 06 x 0,15 material steel DC01 C590 SKU: 624303061](https://maedler.in/product/shim-ring-din-988-03-x-06-x-015-material-steel-dc01-c590-sku-624303061/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 03 x 06 x 0,1 material steel DC01 C590 SKU: 624303060](https://maedler.in/product/shim-ring-din-988-03-x-06-x-01-material-steel-dc01-c590-sku-624303060/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Metric thrust washer inner diameter 62mm outer diameter 90mm width 2mm for shaft diameter 60mm SKU: 62426290](https://maedler.in/product/metric-thrust-washer-inner-diameter-62mm-outer-diameter-90mm-width-2mm-for-shaft-diameter-60mm-sku-62426290/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 52mm outer diameter 78mm width 2mm for shaft diameter 50mm SKU: 62425278](https://maedler.in/product/metric-thrust-washer-inner-diameter-52mm-outer-diameter-78mm-width-2mm-for-shaft-diameter-50mm-sku-62425278/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 48mm outer diameter 74mm width 2mm for shaft diameter 46mm SKU: 62424874](https://maedler.in/product/metric-thrust-washer-inner-diameter-48mm-outer-diameter-74mm-width-2mm-for-shaft-diameter-46mm-sku-62424874/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 42mm outer diameter 66mm width 1,5mm for shaft diameter 40mm SKU: 62424266](https://maedler.in/product/metric-thrust-washer-inner-diameter-42mm-outer-diameter-66mm-width-15mm-for-shaft-diameter-40mm-sku-62424266/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 38mm outer diameter 62mm width 1,5mm for shaft diameter 36mm SKU: 62423862](https://maedler.in/product/metric-thrust-washer-inner-diameter-38mm-outer-diameter-62mm-width-15mm-for-shaft-diameter-36mm-sku-62423862/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 32mm outer diameter 54mm width 1,5mm for shaft diameter 30mm SKU: 62423254](https://maedler.in/product/metric-thrust-washer-inner-diameter-32mm-outer-diameter-54mm-width-15mm-for-shaft-diameter-30mm-sku-62423254/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 28mm outer diameter 48mm width 1,5mm for shaft diameter 26mm SKU: 62422848](https://maedler.in/product/metric-thrust-washer-inner-diameter-28mm-outer-diameter-48mm-width-15mm-for-shaft-diameter-26mm-sku-62422848/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 26mm outer diameter 44mm width 1,5mm for shaft diameter 24mm SKU: 62422644](https://maedler.in/product/metric-thrust-washer-inner-diameter-26mm-outer-diameter-44mm-width-15mm-for-shaft-diameter-24mm-sku-62422644/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 24mm outer diameter 42mm width 1,5mm for shaft diameter 22mm SKU: 62422442](https://maedler.in/product/metric-thrust-washer-inner-diameter-24mm-outer-diameter-42mm-width-15mm-for-shaft-diameter-22mm-sku-62422442/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 22mm outer diameter 38mm width 1,5mm for shaft diameter 20mm SKU: 62422238](https://maedler.in/product/metric-thrust-washer-inner-diameter-22mm-outer-diameter-38mm-width-15mm-for-shaft-diameter-20mm-sku-62422238/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 20mm outer diameter 36mm width 1,5mm for shaft diameter 18mm SKU: 62422036](https://maedler.in/product/metric-thrust-washer-inner-diameter-20mm-outer-diameter-36mm-width-15mm-for-shaft-diameter-18mm-sku-62422036/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 18mm outer diameter 32mm width 1,5mm for shaft diameter 16mm SKU: 62421832](https://maedler.in/product/metric-thrust-washer-inner-diameter-18mm-outer-diameter-32mm-width-15mm-for-shaft-diameter-16mm-sku-62421832/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 16mm outer diameter 30mm width 1,5mm for shaft diameter 14mm SKU: 62421630](https://maedler.in/product/metric-thrust-washer-inner-diameter-16mm-outer-diameter-30mm-width-15mm-for-shaft-diameter-14mm-sku-62421630/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 14mm outer diameter 26mm width 1,5mm for shaft diameter 12mm SKU: 62421426](https://maedler.in/product/metric-thrust-washer-inner-diameter-14mm-outer-diameter-26mm-width-15mm-for-shaft-diameter-12mm-sku-62421426/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 12mm outer diameter 24mm width 1,5mm for shaft diameter 10mm SKU: 62421224](https://maedler.in/product/metric-thrust-washer-inner-diameter-12mm-outer-diameter-24mm-width-15mm-for-shaft-diameter-10mm-sku-62421224/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Metric thrust washer inner diameter 10mm outer diameter 20mm width 1,5mm for shaft diameter 8mm SKU: 62421020](https://maedler.in/product/metric-thrust-washer-inner-diameter-10mm-outer-diameter-20mm-width-15mm-for-shaft-diameter-8mm-sku-62421020/): Material: Steel sheet with multi-porous bronze layer. Sliding surface from PTFE with optimizing additives. Backside and edges with copper-tin plating. These thrust washers are axial plain bearings. They are used for example as contact surface in axial direction, for shafts, which are running in radial plain bearings. They are very well suited for lubrication-free running and also for wet running in oil or grease, for high loads, extreme temperatures. See catalogue page for mounting example. - [Raw material of sintered bronze without borehole outer diameter 202mm length 80mm SKU: 62339595](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-202mm-length-80mm-sku-62339595/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 178mm length 140mm SKU: 62339590](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-178mm-length-140mm-sku-62339590/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 149mm length 140mm SKU: 62339585](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-149mm-length-140mm-sku-62339585/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 149mm length 80mm SKU: 62339580](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-149mm-length-80mm-sku-62339580/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 125mm length 140mm SKU: 62339575](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-125mm-length-140mm-sku-62339575/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 125mm length 80mm SKU: 62339570](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-125mm-length-80mm-sku-62339570/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 105mm length 120mm SKU: 62339565](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-105mm-length-120mm-sku-62339565/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 80mm length 120mm SKU: 62339560](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-80mm-length-120mm-sku-62339560/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 70mm length 120mm SKU: 62339555](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-70mm-length-120mm-sku-62339555/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 62mm length 120mm SKU: 62339550](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-62mm-length-120mm-sku-62339550/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 52mm length 120mm SKU: 62339548](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-52mm-length-120mm-sku-62339548/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 52mm length 60mm SKU: 62339547](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-52mm-length-60mm-sku-62339547/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 45mm length 90mm SKU: 62339545](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-45mm-length-90mm-sku-62339545/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 42mm length 100mm SKU: 62339543](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-42mm-length-100mm-sku-62339543/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 42mm length 50mm SKU: 62339540](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-42mm-length-50mm-sku-62339540/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 32mm length 80mm SKU: 62339535](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-32mm-length-80mm-sku-62339535/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 32mm length 40mm SKU: 62339533](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-32mm-length-40mm-sku-62339533/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 25mm length 50mm SKU: 62339530](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-25mm-length-50mm-sku-62339530/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 25mm length 25mm SKU: 62339527](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-25mm-length-25mm-sku-62339527/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 20mm length 50mm SKU: 62339525](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-20mm-length-50mm-sku-62339525/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 20mm length 25mm SKU: 62339523](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-20mm-length-25mm-sku-62339523/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze without borehole outer diameter 15mm length 30mm SKU: 62339520](https://maedler.in/product/raw-material-of-sintered-bronze-without-borehole-outer-diameter-15mm-length-30mm-sku-62339520/): Solid material of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger.Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 150mm outer diameter 202mm length 140mm SKU: 62339085](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-150mm-outer-diameter-202mm-length-140mm-sku-62339085/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 110mm outer diameter 178mm length 140mm SKU: 62339080](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-110mm-outer-diameter-178mm-length-140mm-sku-62339080/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 110mm outer diameter 178mm length 80mm SKU: 62339075](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-110mm-outer-diameter-178mm-length-80mm-sku-62339075/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 79mm outer diameter 149mm length 140mm SKU: 62339070](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-79mm-outer-diameter-149mm-length-140mm-sku-62339070/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 79mm outer diameter 149mm length 80mm SKU: 62339065](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-79mm-outer-diameter-149mm-length-80mm-sku-62339065/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 59mm outer diameter 125mm length 140mm SKU: 62339060](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-59mm-outer-diameter-125mm-length-140mm-sku-62339060/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 59mm outer diameter 125mm length 80mm SKU: 62339055](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-59mm-outer-diameter-125mm-length-80mm-sku-62339055/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 98mm outer diameter 142mm length 120mm SKU: 62339050](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-98mm-outer-diameter-142mm-length-120mm-sku-62339050/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 98mm outer diameter 142mm length 65mm SKU: 62339048](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-98mm-outer-diameter-142mm-length-65mm-sku-62339048/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 83mm outer diameter 123mm length 120mm SKU: 62339047](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-83mm-outer-diameter-123mm-length-120mm-sku-62339047/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 83mm outer diameter 123mm length 65mm SKU: 62339045](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-83mm-outer-diameter-123mm-length-65mm-sku-62339045/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 68mm outer diameter 104mm length 120mm SKU: 62339040](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-68mm-outer-diameter-104mm-length-120mm-sku-62339040/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 68mm outer diameter 104mm length 65mm SKU: 62339038](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-68mm-outer-diameter-104mm-length-65mm-sku-62339038/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 53mm outer diameter 85mm length 120mm SKU: 62339037](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-53mm-outer-diameter-85mm-length-120mm-sku-62339037/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 53mm outer diameter 85mm length 65mm SKU: 62339035](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-53mm-outer-diameter-85mm-length-65mm-sku-62339035/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 45mm outer diameter 105mm length 120mm SKU: 62339030](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-45mm-outer-diameter-105mm-length-120mm-sku-62339030/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 38mm outer diameter 66mm length 120mm SKU: 62339025](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-38mm-outer-diameter-66mm-length-120mm-sku-62339025/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Raw material of sintered bronze with bore 38mm outer diameter 66mm length 65mm SKU: 62339020](https://maedler.in/product/raw-material-of-sintered-bronze-with-bore-38mm-outer-diameter-66mm-length-65mm-sku-62339020/): Tube of sintered bronze to be machined into plain bearings. After machining, the work piece should be coated with lubricants. The stated values for outer diameter and length are the minimum. The parts may be delivered a bit larger. Surface pressure: max. 35 N/mm², dependent on speed and diameter. Temperature range: -20°C to +120°C. - [Key steel DIN 6880 25 x 14 x 1000 mm material stainless steel 1.4571 SKU: 61992514](https://maedler.in/product/key-steel-din-6880-25-x-14-x-1000-mm-material-stainless-steel-1-4571-sku-61992514/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 20 x 12 x 1000 mm material stainless steel 1.4571 SKU: 61992012](https://maedler.in/product/key-steel-din-6880-20-x-12-x-1000-mm-material-stainless-steel-1-4571-sku-61992012/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 18 x 11 x 1000 mm material stainless steel 1.4571 SKU: 61991811](https://maedler.in/product/key-steel-din-6880-18-x-11-x-1000-mm-material-stainless-steel-1-4571-sku-61991811/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 16 x 10 x 1000 mm material stainless steel 1.4571 SKU: 61991610](https://maedler.in/product/key-steel-din-6880-16-x-10-x-1000-mm-material-stainless-steel-1-4571-sku-61991610/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 14 x 9 x 1000 mm material stainless steel 1.4571 SKU: 61991409](https://maedler.in/product/key-steel-din-6880-14-x-9-x-1000-mm-material-stainless-steel-1-4571-sku-61991409/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 12 x 8 x 1000 mm material stainless steel 1.4571 SKU: 61991208](https://maedler.in/product/key-steel-din-6880-12-x-8-x-1000-mm-material-stainless-steel-1-4571-sku-61991208/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 10 x 8 x 1000 mm material stainless steel 1.4571 SKU: 61991008](https://maedler.in/product/key-steel-din-6880-10-x-8-x-1000-mm-material-stainless-steel-1-4571-sku-61991008/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 8 x 7 x 1000 mm material stainless steel 1.4571 SKU: 61990807](https://maedler.in/product/key-steel-din-6880-8-x-7-x-1000-mm-material-stainless-steel-1-4571-sku-61990807/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 6 x 6 x 1000 mm material stainless steel 1.4571 SKU: 61990606](https://maedler.in/product/key-steel-din-6880-6-x-6-x-1000-mm-material-stainless-steel-1-4571-sku-61990606/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 5 x 5 x 1000 mm material stainless steel 1.4571 SKU: 61990505](https://maedler.in/product/key-steel-din-6880-5-x-5-x-1000-mm-material-stainless-steel-1-4571-sku-61990505/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 4 x 4 x 1000 mm material stainless steel 1.4571 SKU: 61990404](https://maedler.in/product/key-steel-din-6880-4-x-4-x-1000-mm-material-stainless-steel-1-4571-sku-61990404/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 3 x 3 x 1000 mm material stainless steel 1.4571 SKU: 61990303](https://maedler.in/product/key-steel-din-6880-3-x-3-x-1000-mm-material-stainless-steel-1-4571-sku-61990303/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Key steel DIN 6880 2 x 2 x 1000 mm material stainless steel 1.4571 SKU: 61990202](https://maedler.in/product/key-steel-din-6880-2-x-2-x-1000-mm-material-stainless-steel-1-4571-sku-61990202/): Material: Stainless steel 1.4571 (AISI 316 Ti). Standard length about 1000 mm. - [Shoulder screw similar to ISO 7379 ø16f9-M12-100mm stainless steel 1.4301 SKU: 619816100](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-100mm-stainless-steel-1-4301-sku-619816100/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-90mm stainless steel 1.4301 SKU: 619816090](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-90mm-stainless-steel-1-4301-sku-619816090/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-80mm stainless steel 1.4301 SKU: 619816080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-80mm-stainless-steel-1-4301-sku-619816080/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-70mm stainless steel 1.4301 SKU: 619816070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-70mm-stainless-steel-1-4301-sku-619816070/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-60mm stainless steel 1.4301 SKU: 619816060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-60mm-stainless-steel-1-4301-sku-619816060/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-50mm stainless steel 1.4301 SKU: 619816050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-50mm-stainless-steel-1-4301-sku-619816050/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-40mm stainless steel 1.4301 SKU: 619816040](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-40mm-stainless-steel-1-4301-sku-619816040/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø16f9-M12-30mm stainless steel 1.4301 SKU: 619816030](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o16f9-m12-30mm-stainless-steel-1-4301-sku-619816030/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-100mm stainless steel 1.4301 SKU: 619812100](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-100mm-stainless-steel-1-4301-sku-619812100/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-90mm stainless steel 1.4301 SKU: 619812090](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-90mm-stainless-steel-1-4301-sku-619812090/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-80mm stainless steel 1.4301 SKU: 619812080](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-80mm-stainless-steel-1-4301-sku-619812080/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-70mm stainless steel 1.4301 SKU: 619812070](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-70mm-stainless-steel-1-4301-sku-619812070/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-60mm stainless steel 1.4301 SKU: 619812060](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-60mm-stainless-steel-1-4301-sku-619812060/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Shoulder screw similar to ISO 7379 ø12f9-M10-50mm stainless steel 1.4301 SKU: 619812050](https://maedler.in/product/shoulder-screw-similar-to-iso-7379-o12f9-m10-50mm-stainless-steel-1-4301-sku-619812050/): Material: Stainless steel 1.4301 (AISI 304). Screws with precision fit cylinder for multiple usage. These screws have the usual differences to the norm ISO 7379, like it is common on the market. Note: These screws have the usual differences to the norm ISO 7379, like it is common on the market: - Ø 4 mm and Ø 5 mm are not included in the ISO. - Ø 6 mm instead of ISO Ø 6.5 mm. - Ø 12 mm instead of ISO Ø 13 mm. - Ø 24 mm instead of ISO Ø 25 mm. - Concentricity 2 IT 13 and 2 IT 10 may vary. - The stainless steel version is not included in the ISO. Due to the material, the strenght is lower. Fastening Torque: Because of the small contact areas and the recesses, the tightening torque is much smaller than the torque for a standard stainless steel bolt A2-70 of the same thread size. Also, the strength of the contact areas of the corresponding parts must be considered. - [Small geared motor SE with DC motor 12V size 1 n2=522 rpm i=11.5:1 SKU: 43041112](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2522-rpm-i11-51-sku-43041112/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=822 rpm i=7.3:1 SKU: 43041024](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2822-rpm-i7-31-sku-43041024/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=822 rpm i=7.3:1 SKU: 43041012](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2822-rpm-i7-31-sku-43041012/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor SFP 3 with DC-motor 24V i=3,6:1 idle speed 980 1/min. nominal torque 0.3 Nm SKU: 43039824](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i361-idle-speed-980-1-min-nominal-torque-0-3-nm-sku-43039824/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=7,5:1 idle speed 470 1/min. nominal torque 0.6 Nm SKU: 43039724](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i751-idle-speed-470-1-min-nominal-torque-0-6-nm-sku-43039724/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=18:1 idle speed 197 1/min. nominal torque 1.3 Nm SKU: 43039624](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i181-idle-speed-197-1-min-nominal-torque-1-3-nm-sku-43039624/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=28:1 idle speed 127 1/min. nominal torque 2 Nm SKU: 43039524](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i281-idle-speed-127-1-min-nominal-torque-2-nm-sku-43039524/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=56:1 idle speed 63 1/min. nominal torque 4 Nm SKU: 43039424](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i561-idle-speed-63-1-min-nominal-torque-4-nm-sku-43039424/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=121:1 idle speed 29 1/min. nominal torque 6 Nm SKU: 43039324](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i1211-idle-speed-29-1-min-nominal-torque-6-nm-sku-43039324/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=213:1 idle speed 16,5 1/min. nominal torque 6 Nm SKU: 43039224](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i2131-idle-speed-165-1-min-nominal-torque-6-nm-sku-43039224/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 3 with DC-motor 24V i=422:1 idle speed 8,5 1/min. nominal torque 5 Nm SKU: 43039124](https://maedler.in/product/planetary-small-geared-motor-sfp-3-with-dc-motor-24v-i4221-idle-speed-85-1-min-nominal-torque-5-nm-sku-43039124/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x ... ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=3,6:1 idle speed 1000 1/min. SKU: 43038824](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i361-idle-speed-1000-1-min-sku-43038824/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=7,5:1 idle speed 480 1/min. SKU: 43038724](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i751-idle-speed-480-1-min-sku-43038724/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=18:1 idle speed 200 1/min. SKU: 43038624](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i181-idle-speed-200-1-min-sku-43038624/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=28:1 idle speed 128 1/min. SKU: 43038524](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i281-idle-speed-128-1-min-sku-43038524/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=56:1 idle speed 65 1/min. SKU: 43038424](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i561-idle-speed-65-1-min-sku-43038424/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=121:1 idle speed 30 1/min. SKU: 43038324](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i1211-idle-speed-30-1-min-sku-43038324/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=213:1 idle speed 16 1/min. SKU: 43038224](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i2131-idle-speed-16-1-min-sku-43038224/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 2 with DC-motor 24V i=422:1 idle speed 8 1/min. SKU: 43038124](https://maedler.in/product/planetary-small-geared-motor-sfp-2-with-dc-motor-24v-i4221-idle-speed-8-1-min-sku-43038124/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication.Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 30 N; with 2 gear stages 55 N; with 3 gear stages 80 N. Permissible axial shaft load FA: 35 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 30 x ... ; Keep screw depth 10mm. Fastening torque max. 60 +2 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=3,6:1 idle speed 2280 1/min. SKU: 43037824](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i361-idle-speed-2280-1-min-sku-43037824/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=7,5:1 idle speed 1090 1/min. SKU: 43037724](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i751-idle-speed-1090-1-min-sku-43037724/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=18:1 idle speed 460 1/min. SKU: 43037624](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i181-idle-speed-460-1-min-sku-43037624/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=28:1 idle speed 290 1/min. SKU: 43037524](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i281-idle-speed-290-1-min-sku-43037524/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=56:1 idle speed 140 1/min. SKU: 43037424](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i561-idle-speed-140-1-min-sku-43037424/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=121:1 idle speed 68 1/min. SKU: 43037324](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i1211-idle-speed-68-1-min-sku-43037324/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=213:1 idle speed 38 1/min. SKU: 43037224](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i2131-idle-speed-38-1-min-sku-43037224/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Planetary small geared motor SFP 1 with DC-motor 24V i=422:1 idle speed 19 1/min. SKU: 43037124](https://maedler.in/product/planetary-small-geared-motor-sfp-1-with-dc-motor-24v-i4221-idle-speed-19-1-min-sku-43037124/): Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic.Bearing: Output side, plain bearing, motor side, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S1 at nominal torque (continous torque), S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 15 N; with 2 gear stages 35 N; with 3 gear stages 55 N. Permissible axial shaft load FA: 25 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 25 x ... ; Keep screw depth 5mm. Fastening torque max. 40 +0.5 Ncm. Other types (other speeds, optional incremental encoder, 12V) available on request. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 1.13 rpm SKU: 43020513](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-1-13-rpm-sku-43020513/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 0.25 rpm SKU: 43020504](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-0-25-rpm-sku-43020504/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 5 rpm SKU: 43020502](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-5-rpm-sku-43020502/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 7.5 rpm SKU: 43020501](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-7-5-rpm-sku-43020501/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version B output speed 15 rpm SKU: 43020500](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-b-output-speed-15-rpm-sku-43020500/): Motor: For 230V, 50Hz synchronous motor for both rotational directions (see motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Included in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 1 rpm SKU: 43020010](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-1-rpm-sku-43020010/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 2 rpm SKU: 43020009](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-2-rpm-sku-43020009/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 3.12 rpm SKU: 43020008](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-3-12-rpm-sku-43020008/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 5 rpm SKU: 43020006](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-5-rpm-sku-43020006/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 10 rpm SKU: 43020003](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-10-rpm-sku-43020003/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 15 rpm SKU: 43020002](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-15-rpm-sku-43020002/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 30 rpm SKU: 43020001](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-30-rpm-sku-43020001/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Small geared motor CRO 230V 50Hz with capacitor version A output speed 60 rpm SKU: 43020000](https://maedler.in/product/small-geared-motor-cro-230v-50hz-with-capacitor-version-a-output-speed-60-rpm-sku-43020000/): Motor: For 230V, 50Hz. Synchronous motor for both rotational directions (s. motor data overview). Gearbox: Spur gears, straight toothed, made from plastic. Ambient temperature: -5 to +70°C. Capacitor: Enclosed in delivery. - [Standard three phase motor SM/I 230/400V 50Hz 3kW ca. 725 rpm size 132 M model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43017100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3kw-ca-725-rpm-size-132-m-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 725 rpm size 132 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43017000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-725-rpm-size-132-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 715 rpm size 112 M-T model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-715-rpm-size-112-m-t-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 700 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-700-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 710 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-710-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 705 rpm size 90 L model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-705-rpm-size-90-l-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 710 rpm size 90 S model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-710-rpm-size-90-s-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 700 rpm size 80 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43016400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-700-rpm-size-80-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3kW ca. 725 rpm size 132 M model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43015100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3kw-ca-725-rpm-size-132-m-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 725 rpm size 132 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43015000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-725-rpm-size-132-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 715 rpm size 112 M-T model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-715-rpm-size-112-m-t-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 700 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-700-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 710 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-710-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 705 rpm size 90 L model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-705-rpm-size-90-l-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 710 rpm size 90 S model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-710-rpm-size-90-s-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 700 rpm size 80 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43014400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-700-rpm-size-80-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 975 rpm size 132 M model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43013300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-975-rpm-size-132-m-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4kW ca. 970 rpm size 132 M model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43013200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4kw-ca-970-rpm-size-132-m-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3kW ca. 965 rpm size 132 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43013100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3kw-ca-965-rpm-size-132-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 965 rpm size 112 M-T model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43013000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-965-rpm-size-112-m-t-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 955 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-955-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 950 rpm size 90 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-950-rpm-size-90-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 950 rpm size 90 S model B5 efficiency class IE3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-950-rpm-size-90-s-model-b5-efficiency-class-ie3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-ar/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 935 rpm size 80 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-935-rpm-size-80-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 935 rpm size 80 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-935-rpm-size-80-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 910 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43012400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-910-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 975 rpm size 132 M model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43011300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-975-rpm-size-132-m-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4kW ca. 970 rpm size 132 M model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43011200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4kw-ca-970-rpm-size-132-m-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3kW ca. 965 rpm size 132 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43011100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3kw-ca-965-rpm-size-132-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 965 rpm size 112 M-T model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43011000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-965-rpm-size-112-m-t-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 955 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-955-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 950 rpm size 90 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-950-rpm-size-90-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 950 rpm size 90 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-950-rpm-size-90-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 935 rpm size 80 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-935-rpm-size-80-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 935 rpm size 80 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-935-rpm-size-80-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 910 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43010400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-910-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 1460 rpm size 132 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43007300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-1460-rpm-size-132-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4.0kW ca. 1450 rpm size 112 M-T model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43007200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4-0kw-ca-1450-rpm-size-112-m-t-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-ww/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3.0kW ca. 1450 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43007100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3-0kw-ca-1450-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 1450 rpm size 100 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43007000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-1450-rpm-size-100-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 1430 rpm size 90 L model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-1430-rpm-size-90-l-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 1440 rpm size 90 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-1440-rpm-size-90-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 1440 rpm size 80 model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-1440-rpm-size-80-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 1420 rpm size 80 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-1420-rpm-size-80-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 1400 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-1400-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 1400 rpm size 71 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-1400-rpm-size-71-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.18kW ca. 1350 rpm size 63 model B5 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43006300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-18kw-ca-1350-rpm-size-63-model-b5-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 1460 rpm size 132 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43005300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-1460-rpm-size-132-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4.0kW ca. 1450 rpm size 112 M-T model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43005200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4-0kw-ca-1450-rpm-size-112-m-t-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-ww/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 3.0kW ca. 1450 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43005100](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-3-0kw-ca-1450-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 2.2kW ca. 1450 rpm size 100 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43005000](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-2-2kw-ca-1450-rpm-size-100-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.5kW ca. 1430 rpm size 90 L model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004900](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-5kw-ca-1430-rpm-size-90-l-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 1.1kW ca. 1440 rpm size 90 S model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004800](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-1-1kw-ca-1440-rpm-size-90-s-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.75kW ca. 1440 rpm size 80 model B3 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004700](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-75kw-ca-1440-rpm-size-80-model-b3-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.55kW ca. 1420 rpm size 80 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004600](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-55kw-ca-1420-rpm-size-80-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.37kW ca. 1400 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004500](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-37kw-ca-1400-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.25kW ca. 1400 rpm size 71 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004400](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-25kw-ca-1400-rpm-size-71-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 0.18kW ca. 1350 rpm size 63 model B3 efficiency class IE2 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43004300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-0-18kw-ca-1350-rpm-size-63-model-b3-efficiency-class-ie2-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. Up to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 5.5kW ca. 2930 rpm size 132 S model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43003300](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-5-5kw-ca-2930-rpm-size-132-s-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Standard three phase motor SM/I 230/400V 50Hz 4.0kW ca. 2920 rpm size 112 M-T model B5 efficiency class IE3 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43003200](https://maedler.in/product/standard-three-phase-motor-sm-i-230-400v-50hz-4-0kw-ca-2920-rpm-size-112-m-t-model-b5-efficiency-class-ie3-for-operating-instructions-please-visit-the-download-area-of-our-website-ww/): Three phase 230/400V, 50 Hz. Protection class IP 55. Insulation class F. With cage rotor. Surface cooled. FUp to 0,55 kW in efficiency class IE2. From 0.75 kW in efficiency class IE3. The rated output stated below refers to continuous duty, an operating frequency of 50 Hz, a maximum ambient temperature of 40°C and an altitude 1000 m above sea level. Special versions on request: With non-standard voltage and frequency, dual speed, with electromagnetical DC spring-tension disc brake; AC capacitor motor 230 Volt. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 35 teeth material steel SKU: 10613500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-35-teeth-material-steel-sku-10613500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 34 teeth material steel SKU: 10613400](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-34-teeth-material-steel-sku-10613400/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 32 teeth material steel SKU: 10613200](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-32-teeth-material-steel-sku-10613200/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 30 teeth material steel SKU: 10613000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-30-teeth-material-steel-sku-10613000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 28 teeth material steel SKU: 10612800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-28-teeth-material-steel-sku-10612800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 27 teeth material steel SKU: 10612700](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-27-teeth-material-steel-sku-10612700/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 26 teeth material steel SKU: 10612600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-26-teeth-material-steel-sku-10612600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 25 teeth material steel SKU: 10612500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-25-teeth-material-steel-sku-10612500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 24 teeth material steel SKU: 10612400](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-24-teeth-material-steel-sku-10612400/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 23 teeth material steel SKU: 10612300](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-23-teeth-material-steel-sku-10612300/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 22 teeth material steel SKU: 10612200](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-22-teeth-material-steel-sku-10612200/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 21 teeth material steel SKU: 10612100](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-21-teeth-material-steel-sku-10612100/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 20 teeth material steel SKU: 10612000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-20-teeth-material-steel-sku-10612000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 19 teeth material steel SKU: 10611900](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-19-teeth-material-steel-sku-10611900/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 18 teeth material steel SKU: 10611800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-18-teeth-material-steel-sku-10611800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 17 teeth material steel SKU: 10611700](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-17-teeth-material-steel-sku-10611700/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 16 teeth material steel SKU: 10611600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-16-teeth-material-steel-sku-10611600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 15 teeth material steel SKU: 10611500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-15-teeth-material-steel-sku-10611500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 14 teeth material steel SKU: 10611400](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-14-teeth-material-steel-sku-10611400/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 13 teeth material steel SKU: 10611300](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-13-teeth-material-steel-sku-10611300/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 12 teeth material steel SKU: 10611200](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-12-teeth-material-steel-sku-10611200/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 11 teeth material steel SKU: 10611100](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-11-teeth-material-steel-sku-10611100/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 10 teeth material steel SKU: 10611000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-10-teeth-material-steel-sku-10611000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 9 teeth material steel SKU: 10610900](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-9-teeth-material-steel-sku-10610900/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 8 teeth material steel SKU: 10610800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-8-teeth-material-steel-sku-10610800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 40 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599140](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-40-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599140/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 38 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599138](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-38-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599138/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 35 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599135](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-35-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599135/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 32 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599132](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-32-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599132/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599130](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 26 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599126](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-26-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599126/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599125](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599124](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599123](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599122](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599121](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599120](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599119](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599118](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599117](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599116](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599115](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599114](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599113](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRR with hub 08 B-1 1/2x5/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10599112](https://maedler.in/product/sprocket-krr-with-hub-08-b-1-1-2x5-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10599112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 40 teeth material steel teeth induction hardened SKU: 10588140](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-40-teeth-material-steel-teeth-induction-hardened-sku-10588140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 38 teeth material steel teeth induction hardened SKU: 10588138](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-38-teeth-material-steel-teeth-induction-hardened-sku-10588138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 36 teeth material steel teeth induction hardened SKU: 10588136](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-36-teeth-material-steel-teeth-induction-hardened-sku-10588136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 35 teeth material steel teeth induction hardened SKU: 10588135](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-35-teeth-material-steel-teeth-induction-hardened-sku-10588135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 34 teeth material steel teeth induction hardened SKU: 10588134](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-34-teeth-material-steel-teeth-induction-hardened-sku-10588134/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 32 teeth material steel teeth induction hardened SKU: 10588132](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-32-teeth-material-steel-teeth-induction-hardened-sku-10588132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 30 teeth material steel teeth induction hardened SKU: 10588130](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-30-teeth-material-steel-teeth-induction-hardened-sku-10588130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 29 teeth material steel teeth induction hardened SKU: 10588129](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-29-teeth-material-steel-teeth-induction-hardened-sku-10588129/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 28 teeth material steel teeth induction hardened SKU: 10588128](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-28-teeth-material-steel-teeth-induction-hardened-sku-10588128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 27 teeth material steel teeth induction hardened SKU: 10588127](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-27-teeth-material-steel-teeth-induction-hardened-sku-10588127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 26 teeth material steel teeth induction hardened SKU: 10588126](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-26-teeth-material-steel-teeth-induction-hardened-sku-10588126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 25 teeth material steel teeth induction hardened SKU: 10588125](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-25-teeth-material-steel-teeth-induction-hardened-sku-10588125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 24 teeth material steel teeth induction hardened SKU: 10588124](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-24-teeth-material-steel-teeth-induction-hardened-sku-10588124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 23 teeth material steel teeth induction hardened SKU: 10588123](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-23-teeth-material-steel-teeth-induction-hardened-sku-10588123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 22 teeth material steel teeth induction hardened SKU: 10588122](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-22-teeth-material-steel-teeth-induction-hardened-sku-10588122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 21 teeth material steel teeth induction hardened SKU: 10588121](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-21-teeth-material-steel-teeth-induction-hardened-sku-10588121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 20 teeth material steel teeth induction hardened SKU: 10588120](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-20-teeth-material-steel-teeth-induction-hardened-sku-10588120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 19 teeth material steel teeth induction hardened SKU: 10588119](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-19-teeth-material-steel-teeth-induction-hardened-sku-10588119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 18 teeth material steel teeth induction hardened SKU: 10588118](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-18-teeth-material-steel-teeth-induction-hardened-sku-10588118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 17 teeth material steel teeth induction hardened SKU: 10588117](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-17-teeth-material-steel-teeth-induction-hardened-sku-10588117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 16 teeth material steel teeth induction hardened SKU: 10588116](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-16-teeth-material-steel-teeth-induction-hardened-sku-10588116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 15 teeth material steel teeth induction hardened SKU: 10588115](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-15-teeth-material-steel-teeth-induction-hardened-sku-10588115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 14 teeth material steel teeth induction hardened SKU: 10588114](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-14-teeth-material-steel-teeth-induction-hardened-sku-10588114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 13 teeth material steel teeth induction hardened SKU: 10588113](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-13-teeth-material-steel-teeth-induction-hardened-sku-10588113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 12 teeth material steel teeth induction hardened SKU: 10588112](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-12-teeth-material-steel-teeth-induction-hardened-sku-10588112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 11 teeth material steel teeth induction hardened SKU: 10588111](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-11-teeth-material-steel-teeth-induction-hardened-sku-10588111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 10 teeth material steel teeth induction hardened SKU: 10588110](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-10-teeth-material-steel-teeth-induction-hardened-sku-10588110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 9 teeth material steel teeth induction hardened SKU: 10588109](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-9-teeth-material-steel-teeth-induction-hardened-sku-10588109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRG with hub 08 B-1 1/2x5/16" 8 teeth material steel teeth induction hardened SKU: 10588108](https://maedler.in/product/sprocket-krg-with-hub-08-b-1-1-2x5-16-8-teeth-material-steel-teeth-induction-hardened-sku-10588108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583038](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583035](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583032](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583030](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583028](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583028/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10583025](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10583025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582538](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582535](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582532](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582530](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582528](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582525](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582524](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582524/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582522](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582522/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582520](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 25 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582519](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-25-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582438](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582435](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582432](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582430](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582430/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582428](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582425](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582424](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582424/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582422](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582422/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582420](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582420/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Sprocket KRF with hub 08 B-1 24 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10582419](https://maedler.in/product/sprocket-krf-with-hub-08-b-1-24-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10582419/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Shim ring DIN 988 19 x 26 x 1,2 material steel DC01 C590 SKU: 624319267](https://maedler.in/product/shim-ring-din-988-19-x-26-x-12-material-steel-dc01-c590-sku-624319267/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 19 x 26 x 1 material steel DC01 C590 SKU: 624319266](https://maedler.in/product/shim-ring-din-988-19-x-26-x-1-material-steel-dc01-c590-sku-624319266/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 19 x 26 x 0,5 material steel DC01 C590 SKU: 624319265](https://maedler.in/product/shim-ring-din-988-19-x-26-x-05-material-steel-dc01-c590-sku-624319265/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 19 x 26 x 0,3 material steel DC01 C590 SKU: 624319264](https://maedler.in/product/shim-ring-din-988-19-x-26-x-03-material-steel-dc01-c590-sku-624319264/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 19 x 26 x 0,25 material steel DC01 C590 SKU: 624319263](https://maedler.in/product/shim-ring-din-988-19-x-26-x-025-material-steel-dc01-c590-sku-624319263/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 19 x 26 x 0,2 material steel DC01 C590 SKU: 624319262](https://maedler.in/product/shim-ring-din-988-19-x-26-x-02-material-steel-dc01-c590-sku-624319262/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 19 x 26 x 0,15 material steel DC01 C590 SKU: 624319261](https://maedler.in/product/shim-ring-din-988-19-x-26-x-015-material-steel-dc01-c590-sku-624319261/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 19 x 26 x 0,1 material steel DC01 C590 SKU: 624319260](https://maedler.in/product/shim-ring-din-988-19-x-26-x-01-material-steel-dc01-c590-sku-624319260/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 18 x 25 x 1,2 material steel DC01 C590 SKU: 624318257](https://maedler.in/product/shim-ring-din-988-18-x-25-x-12-material-steel-dc01-c590-sku-624318257/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 18 x 25 x 1 material steel DC01 C590 SKU: 624318256](https://maedler.in/product/shim-ring-din-988-18-x-25-x-1-material-steel-dc01-c590-sku-624318256/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 18 x 25 x 0,5 material steel DC01 C590 SKU: 624318255](https://maedler.in/product/shim-ring-din-988-18-x-25-x-05-material-steel-dc01-c590-sku-624318255/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 18 x 25 x 0,3 material steel DC01 C590 SKU: 624318254](https://maedler.in/product/shim-ring-din-988-18-x-25-x-03-material-steel-dc01-c590-sku-624318254/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 18 x 25 x 0,25 material steel DC01 C590 SKU: 624318253](https://maedler.in/product/shim-ring-din-988-18-x-25-x-025-material-steel-dc01-c590-sku-624318253/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 18 x 25 x 0,2 material steel DC01 C590 SKU: 624318252](https://maedler.in/product/shim-ring-din-988-18-x-25-x-02-material-steel-dc01-c590-sku-624318252/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 18 x 25 x 0,15 material steel DC01 C590 SKU: 624318251](https://maedler.in/product/shim-ring-din-988-18-x-25-x-015-material-steel-dc01-c590-sku-624318251/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 18 x 25 x 0,1 material steel DC01 C590 SKU: 624318250](https://maedler.in/product/shim-ring-din-988-18-x-25-x-01-material-steel-dc01-c590-sku-624318250/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 17 x 24 x 1,2 material steel DC01 C590 SKU: 624317247](https://maedler.in/product/shim-ring-din-988-17-x-24-x-12-material-steel-dc01-c590-sku-624317247/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 17 x 24 x 1 material steel DC01 C590 SKU: 624317246](https://maedler.in/product/shim-ring-din-988-17-x-24-x-1-material-steel-dc01-c590-sku-624317246/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 17 x 24 x 0,5 material steel DC01 C590 SKU: 624317245](https://maedler.in/product/shim-ring-din-988-17-x-24-x-05-material-steel-dc01-c590-sku-624317245/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 17 x 24 x 0,3 material steel DC01 C590 SKU: 624317244](https://maedler.in/product/shim-ring-din-988-17-x-24-x-03-material-steel-dc01-c590-sku-624317244/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 17 x 24 x 0,25 material steel DC01 C590 SKU: 624317243](https://maedler.in/product/shim-ring-din-988-17-x-24-x-025-material-steel-dc01-c590-sku-624317243/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 17 x 24 x 0,2 material steel DC01 C590 SKU: 624317242](https://maedler.in/product/shim-ring-din-988-17-x-24-x-02-material-steel-dc01-c590-sku-624317242/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 17 x 24 x 0,15 material steel DC01 C590 SKU: 624317241](https://maedler.in/product/shim-ring-din-988-17-x-24-x-015-material-steel-dc01-c590-sku-624317241/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 17 x 24 x 0,1 material steel DC01 C590 SKU: 624317240](https://maedler.in/product/shim-ring-din-988-17-x-24-x-01-material-steel-dc01-c590-sku-624317240/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 16 x 22 x 1,2 material steel DC01 C590 SKU: 624316227](https://maedler.in/product/shim-ring-din-988-16-x-22-x-12-material-steel-dc01-c590-sku-624316227/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 16 x 22 x 1 material steel DC01 C590 SKU: 624316226](https://maedler.in/product/shim-ring-din-988-16-x-22-x-1-material-steel-dc01-c590-sku-624316226/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 16 x 22 x 0,5 material steel DC01 C590 SKU: 624316225](https://maedler.in/product/shim-ring-din-988-16-x-22-x-05-material-steel-dc01-c590-sku-624316225/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 16 x 22 x 0,3 material steel DC01 C590 SKU: 624316224](https://maedler.in/product/shim-ring-din-988-16-x-22-x-03-material-steel-dc01-c590-sku-624316224/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 16 x 22 x 0,25 material steel DC01 C590 SKU: 624316223](https://maedler.in/product/shim-ring-din-988-16-x-22-x-025-material-steel-dc01-c590-sku-624316223/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 16 x 22 x 0,2 material steel DC01 C590 SKU: 624316222](https://maedler.in/product/shim-ring-din-988-16-x-22-x-02-material-steel-dc01-c590-sku-624316222/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 16 x 22 x 0,15 material steel DC01 C590 SKU: 624316221](https://maedler.in/product/shim-ring-din-988-16-x-22-x-015-material-steel-dc01-c590-sku-624316221/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 15 x 21 x 1,2 material steel DC01 C590 SKU: 624315217](https://maedler.in/product/shim-ring-din-988-15-x-21-x-12-material-steel-dc01-c590-sku-624315217/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 15 x 21 x 1 material steel DC01 C590 SKU: 624315216](https://maedler.in/product/shim-ring-din-988-15-x-21-x-1-material-steel-dc01-c590-sku-624315216/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 15 x 21 x 0,5 material steel DC01 C590 SKU: 624315215](https://maedler.in/product/shim-ring-din-988-15-x-21-x-05-material-steel-dc01-c590-sku-624315215/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 15 x 21 x 0,3 material steel DC01 C590 SKU: 624315214](https://maedler.in/product/shim-ring-din-988-15-x-21-x-03-material-steel-dc01-c590-sku-624315214/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 15 x 21 x 0,25 material steel DC01 C590 SKU: 624315213](https://maedler.in/product/shim-ring-din-988-15-x-21-x-025-material-steel-dc01-c590-sku-624315213/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 15 x 21 x 0,2 material steel DC01 C590 SKU: 624315212](https://maedler.in/product/shim-ring-din-988-15-x-21-x-02-material-steel-dc01-c590-sku-624315212/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 15 x 21 x 0,15 material steel DC01 C590 SKU: 624315211](https://maedler.in/product/shim-ring-din-988-15-x-21-x-015-material-steel-dc01-c590-sku-624315211/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 15 x 21 x 0,1 material steel DC01 C590 SKU: 624315210](https://maedler.in/product/shim-ring-din-988-15-x-21-x-01-material-steel-dc01-c590-sku-624315210/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 14 x 20 x 1 material steel DC01 C590 SKU: 624314206](https://maedler.in/product/shim-ring-din-988-14-x-20-x-1-material-steel-dc01-c590-sku-624314206/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 14 x 20 x 0,5 material steel DC01 C590 SKU: 624314205](https://maedler.in/product/shim-ring-din-988-14-x-20-x-05-material-steel-dc01-c590-sku-624314205/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 14 x 20 x 0,3 material steel DC01 C590 SKU: 624314204](https://maedler.in/product/shim-ring-din-988-14-x-20-x-03-material-steel-dc01-c590-sku-624314204/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 14 x 20 x 0,25 material steel DC01 C590 SKU: 624314203](https://maedler.in/product/shim-ring-din-988-14-x-20-x-025-material-steel-dc01-c590-sku-624314203/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 14 x 20 x 0,2 material steel DC01 C590 SKU: 624314202](https://maedler.in/product/shim-ring-din-988-14-x-20-x-02-material-steel-dc01-c590-sku-624314202/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 14 x 20 x 0,15 material steel DC01 C590 SKU: 624314201](https://maedler.in/product/shim-ring-din-988-14-x-20-x-015-material-steel-dc01-c590-sku-624314201/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 14 x 20 x 0,1 material steel DC01 C590 SKU: 624314200](https://maedler.in/product/shim-ring-din-988-14-x-20-x-01-material-steel-dc01-c590-sku-624314200/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 13 x 19 x 1 material steel DC01 C590 SKU: 624313196](https://maedler.in/product/shim-ring-din-988-13-x-19-x-1-material-steel-dc01-c590-sku-624313196/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 13 x 19 x 0,5 material steel DC01 C590 SKU: 624313195](https://maedler.in/product/shim-ring-din-988-13-x-19-x-05-material-steel-dc01-c590-sku-624313195/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 13 x 19 x 0,3 material steel DC01 C590 SKU: 624313194](https://maedler.in/product/shim-ring-din-988-13-x-19-x-03-material-steel-dc01-c590-sku-624313194/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 13 x 19 x 0,25 material steel DC01 C590 SKU: 624313193](https://maedler.in/product/shim-ring-din-988-13-x-19-x-025-material-steel-dc01-c590-sku-624313193/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 13 x 19 x 0,2 material steel DC01 C590 SKU: 624313192](https://maedler.in/product/shim-ring-din-988-13-x-19-x-02-material-steel-dc01-c590-sku-624313192/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 13 x 19 x 0,15 material steel DC01 C590 SKU: 624313191](https://maedler.in/product/shim-ring-din-988-13-x-19-x-015-material-steel-dc01-c590-sku-624313191/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 13 x 19 x 0,1 material steel DC01 C590 SKU: 624313190](https://maedler.in/product/shim-ring-din-988-13-x-19-x-01-material-steel-dc01-c590-sku-624313190/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 12 x 18 x 1 material steel DC01 C590 SKU: 624312186](https://maedler.in/product/shim-ring-din-988-12-x-18-x-1-material-steel-dc01-c590-sku-624312186/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 12 x 18 x 0,5 material steel DC01 C590 SKU: 624312185](https://maedler.in/product/shim-ring-din-988-12-x-18-x-05-material-steel-dc01-c590-sku-624312185/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 12 x 18 x 0,3 material steel DC01 C590 SKU: 624312184](https://maedler.in/product/shim-ring-din-988-12-x-18-x-03-material-steel-dc01-c590-sku-624312184/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 12 x 18 x 0,25 material steel DC01 C590 SKU: 624312183](https://maedler.in/product/shim-ring-din-988-12-x-18-x-025-material-steel-dc01-c590-sku-624312183/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 12 x 18 x 0,2 material steel DC01 C590 SKU: 624312182](https://maedler.in/product/shim-ring-din-988-12-x-18-x-02-material-steel-dc01-c590-sku-624312182/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 12 x 18 x 0,15 material steel DC01 C590 SKU: 624312181](https://maedler.in/product/shim-ring-din-988-12-x-18-x-015-material-steel-dc01-c590-sku-624312181/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 12 x 18 x 0,1 material steel DC01 C590 SKU: 624312180](https://maedler.in/product/shim-ring-din-988-12-x-18-x-01-material-steel-dc01-c590-sku-624312180/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 11 x 17 x 1 material steel DC01 C590 SKU: 624311176](https://maedler.in/product/shim-ring-din-988-11-x-17-x-1-material-steel-dc01-c590-sku-624311176/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 11 x 17 x 0,5 material steel DC01 C590 SKU: 624311175](https://maedler.in/product/shim-ring-din-988-11-x-17-x-05-material-steel-dc01-c590-sku-624311175/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 11 x 17 x 0,3 material steel DC01 C590 SKU: 624311174](https://maedler.in/product/shim-ring-din-988-11-x-17-x-03-material-steel-dc01-c590-sku-624311174/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 11 x 17 x 0,25 material steel DC01 C590 SKU: 624311173](https://maedler.in/product/shim-ring-din-988-11-x-17-x-025-material-steel-dc01-c590-sku-624311173/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 11 x 17 x 0,2 material steel DC01 C590 SKU: 624311172](https://maedler.in/product/shim-ring-din-988-11-x-17-x-02-material-steel-dc01-c590-sku-624311172/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 11 x 17 x 0,1 material steel DC01 C590 SKU: 624311170](https://maedler.in/product/shim-ring-din-988-11-x-17-x-01-material-steel-dc01-c590-sku-624311170/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 10 x 16 x 1 material steel DC01 C590 SKU: 624310166](https://maedler.in/product/shim-ring-din-988-10-x-16-x-1-material-steel-dc01-c590-sku-624310166/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 10 x 16 x 0,5 material steel DC01 C590 SKU: 624310165](https://maedler.in/product/shim-ring-din-988-10-x-16-x-05-material-steel-dc01-c590-sku-624310165/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 10 x 16 x 0,3 material steel DC01 C590 SKU: 624310164](https://maedler.in/product/shim-ring-din-988-10-x-16-x-03-material-steel-dc01-c590-sku-624310164/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 10 x 16 x 0,25 material steel DC01 C590 SKU: 624310163](https://maedler.in/product/shim-ring-din-988-10-x-16-x-025-material-steel-dc01-c590-sku-624310163/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 10 x 16 x 0,2 material steel DC01 C590 SKU: 624310162](https://maedler.in/product/shim-ring-din-988-10-x-16-x-02-material-steel-dc01-c590-sku-624310162/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 10 x 16 x 0,15 material steel DC01 C590 SKU: 624310161](https://maedler.in/product/shim-ring-din-988-10-x-16-x-015-material-steel-dc01-c590-sku-624310161/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 10 x 16 x 0,1 material steel DC01 C590 SKU: 624310160](https://maedler.in/product/shim-ring-din-988-10-x-16-x-01-material-steel-dc01-c590-sku-624310160/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 09 x 15 x 1 material steel DC01 C590 SKU: 624309156](https://maedler.in/product/shim-ring-din-988-09-x-15-x-1-material-steel-dc01-c590-sku-624309156/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 09 x 15 x 0,5 material steel DC01 C590 SKU: 624309155](https://maedler.in/product/shim-ring-din-988-09-x-15-x-05-material-steel-dc01-c590-sku-624309155/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 09 x 15 x 0,3 material steel DC01 C590 SKU: 624309154](https://maedler.in/product/shim-ring-din-988-09-x-15-x-03-material-steel-dc01-c590-sku-624309154/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 09 x 15 x 0,2 material steel DC01 C590 SKU: 624309152](https://maedler.in/product/shim-ring-din-988-09-x-15-x-02-material-steel-dc01-c590-sku-624309152/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 09 x 15 x 0,15 material steel DC01 C590 SKU: 624309151](https://maedler.in/product/shim-ring-din-988-09-x-15-x-015-material-steel-dc01-c590-sku-624309151/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 09 x 15 x 0,1 material steel DC01 C590 SKU: 624309150](https://maedler.in/product/shim-ring-din-988-09-x-15-x-01-material-steel-dc01-c590-sku-624309150/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 08 x 14 x 1 material steel DC01 C590 SKU: 624308146](https://maedler.in/product/shim-ring-din-988-08-x-14-x-1-material-steel-dc01-c590-sku-624308146/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 08 x 14 x 0,5 material steel DC01 C590 SKU: 624308145](https://maedler.in/product/shim-ring-din-988-08-x-14-x-05-material-steel-dc01-c590-sku-624308145/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 08 x 14 x 0,3 material steel DC01 C590 SKU: 624308144](https://maedler.in/product/shim-ring-din-988-08-x-14-x-03-material-steel-dc01-c590-sku-624308144/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 08 x 14 x 0,25 material steel DC01 C590 SKU: 624308143](https://maedler.in/product/shim-ring-din-988-08-x-14-x-025-material-steel-dc01-c590-sku-624308143/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 08 x 14 x 0,2 material steel DC01 C590 SKU: 624308142](https://maedler.in/product/shim-ring-din-988-08-x-14-x-02-material-steel-dc01-c590-sku-624308142/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 08 x 14 x 0,15 material steel DC01 C590 SKU: 624308141](https://maedler.in/product/shim-ring-din-988-08-x-14-x-015-material-steel-dc01-c590-sku-624308141/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 08 x 14 x 0,1 material steel DC01 C590 SKU: 624308140](https://maedler.in/product/shim-ring-din-988-08-x-14-x-01-material-steel-dc01-c590-sku-624308140/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 07 x 13 x 1 material steel DC01 C590 SKU: 624307136](https://maedler.in/product/shim-ring-din-988-07-x-13-x-1-material-steel-dc01-c590-sku-624307136/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 07 x 13 x 0,5 material steel DC01 C590 SKU: 624307135](https://maedler.in/product/shim-ring-din-988-07-x-13-x-05-material-steel-dc01-c590-sku-624307135/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 07 x 13 x 0,3 material steel DC01 C590 SKU: 624307134](https://maedler.in/product/shim-ring-din-988-07-x-13-x-03-material-steel-dc01-c590-sku-624307134/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 07 x 13 x 0,2 material steel DC01 C590 SKU: 624307132](https://maedler.in/product/shim-ring-din-988-07-x-13-x-02-material-steel-dc01-c590-sku-624307132/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 07 x 13 x 0,1 material steel DC01 C590 SKU: 624307130](https://maedler.in/product/shim-ring-din-988-07-x-13-x-01-material-steel-dc01-c590-sku-624307130/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 06 x 12 x 1 material steel DC01 C590 SKU: 624306126](https://maedler.in/product/shim-ring-din-988-06-x-12-x-1-material-steel-dc01-c590-sku-624306126/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 06 x 12 x 0,5 material steel DC01 C590 SKU: 624306125](https://maedler.in/product/shim-ring-din-988-06-x-12-x-05-material-steel-dc01-c590-sku-624306125/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 06 x 12 x 0,3 material steel DC01 C590 SKU: 624306124](https://maedler.in/product/shim-ring-din-988-06-x-12-x-03-material-steel-dc01-c590-sku-624306124/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 06 x 12 x 0,25 material steel DC01 C590 SKU: 624306123](https://maedler.in/product/shim-ring-din-988-06-x-12-x-025-material-steel-dc01-c590-sku-624306123/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 06 x 12 x 0,2 material steel DC01 C590 SKU: 624306122](https://maedler.in/product/shim-ring-din-988-06-x-12-x-02-material-steel-dc01-c590-sku-624306122/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 06 x 12 x 0,1 material steel DC01 C590 SKU: 624306120](https://maedler.in/product/shim-ring-din-988-06-x-12-x-01-material-steel-dc01-c590-sku-624306120/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 05 x 10 x 1 material steel DC01 C590 SKU: 624305106](https://maedler.in/product/shim-ring-din-988-05-x-10-x-1-material-steel-dc01-c590-sku-624305106/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 05 x 10 x 0,5 material steel DC01 C590 SKU: 624305105](https://maedler.in/product/shim-ring-din-988-05-x-10-x-05-material-steel-dc01-c590-sku-624305105/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 05 x 10 x 0,3 material steel DC01 C590 SKU: 624305104](https://maedler.in/product/shim-ring-din-988-05-x-10-x-03-material-steel-dc01-c590-sku-624305104/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=429/min i=7:1 output shaft side 2 SKU: 43049215](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2429-min-i71-output-shaft-side-2-sku-43049215/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=286/min i=10,5:1 output shaft side 2 SKU: 43049214](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2286-min-i1051-output-shaft-side-2-sku-43049214/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=200/min i=15:1 output shaft side 2 SKU: 43049213](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2200-min-i151-output-shaft-side-2-sku-43049213/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=143/min i=21:1 output shaft side 2 SKU: 43049212](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2143-min-i211-output-shaft-side-2-sku-43049212/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=100/min i=30:1 output shaft side 2 SKU: 43049211](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2100-min-i301-output-shaft-side-2-sku-43049211/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=75/min i=40:1 output shaft side 2 SKU: 43049210](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n275-min-i401-output-shaft-side-2-sku-43049210/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=44/min i=68:1 output shaft side 2 SKU: 43049209](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n244-min-i681-output-shaft-side-2-sku-43049209/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=1000/min i=3:1 output shaft side 2 SKU: 43049208](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n21000-min-i31-output-shaft-side-2-sku-43049208/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=429/min i=7:1 output shaft side 2 SKU: 43049207](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2429-min-i71-output-shaft-side-2-sku-43049207/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=286/min i=10,5:1 output shaft side 2 SKU: 43049206](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2286-min-i1051-output-shaft-side-2-sku-43049206/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=200/min i=15:1 output shaft side 2 SKU: 43049205](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2200-min-i151-output-shaft-side-2-sku-43049205/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=143/min i=21:1 output shaft side 2 SKU: 43049204](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2143-min-i211-output-shaft-side-2-sku-43049204/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=100/min i=30:1 output shaft side 2 SKU: 43049203](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2100-min-i301-output-shaft-side-2-sku-43049203/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=75/min i=40:1 output shaft side 2 SKU: 43049202](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n275-min-i401-output-shaft-side-2-sku-43049202/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=44/min i=68:1 output shaft side 2 SKU: 43049201](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n244-min-i681-output-shaft-side-2-sku-43049201/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=1000/min i=3:1 output shaft side 1 SKU: 43049116](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n21000-min-i31-output-shaft-side-1-sku-43049116/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=429/min i=7:1 output shaft side 1 SKU: 43049115](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2429-min-i71-output-shaft-side-1-sku-43049115/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=286/min i=10,5:1 output shaft side 1 SKU: 43049114](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2286-min-i1051-output-shaft-side-1-sku-43049114/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=200/min i=15:1 output shaft side 1 SKU: 43049113](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2200-min-i151-output-shaft-side-1-sku-43049113/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=143/min i=21:1 output shaft side 1 SKU: 43049112](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2143-min-i211-output-shaft-side-1-sku-43049112/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=100/min i=30:1 output shaft side 1 SKU: 43049111](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n2100-min-i301-output-shaft-side-1-sku-43049111/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=75/min i=40:1 output shaft side 1 SKU: 43049110](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n275-min-i401-output-shaft-side-1-sku-43049110/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=44/min i=68:1 output shaft side 1 SKU: 43049109](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n244-min-i681-output-shaft-side-1-sku-43049109/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=1000/min i=3:1 output shaft side 1 SKU: 43049108](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n21000-min-i31-output-shaft-side-1-sku-43049108/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=429/min i=7:1 output shaft side 1 SKU: 43049107](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2429-min-i71-output-shaft-side-1-sku-43049107/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=286/min i=10,5:1 output shaft side 1 SKU: 43049106](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2286-min-i1051-output-shaft-side-1-sku-43049106/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=200/min i=15:1 output shaft side 1 SKU: 43049105](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2200-min-i151-output-shaft-side-1-sku-43049105/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=143/min i=21:1 output shaft side 1 SKU: 43049104](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2143-min-i211-output-shaft-side-1-sku-43049104/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=100/min i=30:1 output shaft side 1 SKU: 43049103](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n2100-min-i301-output-shaft-side-1-sku-43049103/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=75/min i=40:1 output shaft side 1 SKU: 43049102](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n275-min-i401-output-shaft-side-1-sku-43049102/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG with permament magnet DC motor 24V 28W n2=44/min i=68:1 output shaft side 1 SKU: 43049101](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-28w-n244-min-i681-output-shaft-side-1-sku-43049101/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 1.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1.Output shaft on Side 1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 56W n2=429/min i=7:1 with hollow shaft SKU: 43049015](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-56w-n2429-min-i71-with-hollow-shaft-sku-43049015/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 56W n2=200/min i=15:1 with hollow shaft SKU: 43049013](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-56w-n2200-min-i151-with-hollow-shaft-sku-43049013/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 56W n2=100/min i=30:1 with hollow shaft SKU: 43049011](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-56w-n2100-min-i301-with-hollow-shaft-sku-43049011/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 56W n2=44/min i=68:1 with hollow shaft SKU: 43049009](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-56w-n244-min-i681-with-hollow-shaft-sku-43049009/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 28W n2=429/min i=7:1 with hollow shaft SKU: 43049007](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-28w-n2429-min-i71-with-hollow-shaft-sku-43049007/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 28W n2=200/min i=15:1 with hollow shaft SKU: 43049005](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-28w-n2200-min-i151-with-hollow-shaft-sku-43049005/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 28W n2=100/min i=30:1 with hollow shaft SKU: 43049003](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-28w-n2100-min-i301-with-hollow-shaft-sku-43049003/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Small worm geared motor SG-H with permament magnet DC motor 24V 28W n2=44/min i=68:1 with hollow shaft SKU: 43049001](https://maedler.in/product/small-worm-geared-motor-sg-h-with-permament-magnet-dc-motor-24v-28w-n244-min-i681-with-hollow-shaft-sku-43049001/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: Hollow shaft.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=41:4 idle speed 580 /min SKU: 43048924](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i414-idle-speed-580-min-sku-43048924/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=44:4 idle speed 280 /min SKU: 43048824](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i444-idle-speed-280-min-sku-43048824/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=44:4 idle speed 240 /min SKU: 43048724](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i444-idle-speed-240-min-sku-43048724/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=52:2 idle speed 180 /min SKU: 43048624](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i522-idle-speed-180-min-sku-43048624/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=52:2 idle speed 110 /min SKU: 43048424](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i522-idle-speed-110-min-sku-43048424/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=52:2 idle speed 50 /min SKU: 43048224](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i522-idle-speed-50-min-sku-43048224/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=69:1 idle speed 35 /min SKU: 43048124](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i691-idle-speed-35-min-sku-43048124/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 3 with DC-motor 24V i=69:1 idle speed 13 /min SKU: 43048024](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-3-with-dc-motor-24v-i691-idle-speed-13-min-sku-43048024/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=59:3 idle speed 210 /min SKU: 43047424](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i593-idle-speed-210-min-sku-43047424/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=62:1 idle speed 140 /min SKU: 43047324](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i621-idle-speed-140-min-sku-43047324/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=62:1 idle speed 95 /min SKU: 43047224](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i621-idle-speed-95-min-sku-43047224/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=62:1 idle speed 50 /min SKU: 43047124](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i621-idle-speed-50-min-sku-43047124/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 24V i=62:1 idle speed 35 /min SKU: 43047024](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-24v-i621-idle-speed-35-min-sku-43047024/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature worm gear motor SFS Gr. 2 with DC-motor 12V i=62:1 idle speed 25 /min SKU: 43047012](https://maedler.in/product/miniature-worm-gear-motor-sfs-gr-2-with-dc-motor-12v-i621-idle-speed-25-min-sku-43047012/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Teeth: Worm gear set made from plastic. Bearing: Output side, plain bearing, motor side, ball bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 12 V or 24 V, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 30. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Caution: Output shaft and shaft form side as per the table. Ordering Details: e.g.: Type, idle speed, Product No. - [Miniature spur gear motor SF with DC-motor 24V i=10:1 idle speed 610 /min SKU: 43046924](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i101-idle-speed-610-min-sku-43046924/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=30:1 idle speed 210 /min SKU: 43046824](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i301-idle-speed-210-min-sku-43046824/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=50:1 idle speed 130 /min SKU: 43046724](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i501-idle-speed-130-min-sku-43046724/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=75:1 idle speed 90 /min SKU: 43046624](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i751-idle-speed-90-min-sku-43046624/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=150:1 idle speed 43 /min SKU: 43046424](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i1501-idle-speed-43-min-sku-43046424/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=250:1 idle speed 27 /min SKU: 43046324](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i2501-idle-speed-27-min-sku-43046324/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=1000:1 idle speed 6 /min SKU: 43046124](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i10001-idle-speed-6-min-sku-43046124/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Miniature spur gear motor SF with DC-motor 24V i=3000:1 idle speed 2 /min SKU: 43046024](https://maedler.in/product/miniature-spur-gear-motor-sf-with-dc-motor-24v-i30001-idle-speed-2-min-sku-43046024/): Housing: Steel, zinc-plated. Can be mounted in any position. Teeth: Steel gears. Bearing: Sintered bronze plain bearings. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. motor speed 6500 rpm, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2-10 min. Permissible ambient operating temperature: -10 to +60°C. Ideal drive for short term operation, e.g. for actuating device. - [Planetary small geared motor PE with DC motor 24V size 2 n2=51 rpm i=59:1 SKU: 43045824](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n251-rpm-i591-sku-43045824/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=65 rpm i=46:1 SKU: 43045724](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n265-rpm-i461-sku-43045724/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=83 rpm i=36:1 SKU: 43045624](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n283-rpm-i361-sku-43045624/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=100 rpm i=30:1 SKU: 43045524](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2100-rpm-i301-sku-43045524/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=120 rpm i=25:1 SKU: 43045424](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2120-rpm-i251-sku-43045424/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=143 rpm i=21:1 SKU: 43045324](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2143-rpm-i211-sku-43045324/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=392 rpm i=7.66:1 SKU: 43045224](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2392-rpm-i7-661-sku-43045224/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=500 rpm i=6:1 SKU: 43045124](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2500-rpm-i61-sku-43045124/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 2 n2=600 rpm i=5:1 SKU: 43045024](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-2-n2600-rpm-i51-sku-43045024/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox roller bearing / plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=22 rpm i=270:1 SKU: 43044424](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n222-rpm-i2701-sku-43044424/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=29 rpm i=210:1 SKU: 43044324](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n229-rpm-i2101-sku-43044324/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=50 rpm i=120:1 SKU: 43044224](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n250-rpm-i1201-sku-43044224/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=67 rpm i=90:1 SKU: 43044124](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n267-rpm-i901-sku-43044124/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Planetary small geared motor PE with DC motor 24V size 1 n2=200 rpm i=30:1 SKU: 43044024](https://maedler.in/product/planetary-small-geared-motor-pe-with-dc-motor-24v-size-1-n2200-rpm-i301-sku-43044024/): Housing: Steel, zinc-plated, sealed against lubricant leaks and protected against dust, can be mounted in any position. Gearbox: 1st gearbox stage: plastic gears, other gears made from steel. Bearing: Motor roller bearing. Gearbox: sintered bronze plain bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 6000 rpm, Pinion milled into motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=83 rpm i=36:1 SKU: 43043924](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n283-rpm-i361-sku-43043924/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=100 rpm i=30:1 SKU: 43043824](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2100-rpm-i301-sku-43043824/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=133 rpm i=30:1 SKU: 43043724](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2133-rpm-i301-sku-43043724/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=160 rpm i=25:1 SKU: 43043624](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2160-rpm-i251-sku-43043624/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=200 rpm i=20:1 SKU: 43043524](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2200-rpm-i201-sku-43043524/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=276 rpm i=14.5:1 SKU: 43043424](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2276-rpm-i14-51-sku-43043424/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=333 rpm i=12:1 SKU: 43043324](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2333-rpm-i121-sku-43043324/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=429 rpm i=9.33:1 SKU: 43043224](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2429-rpm-i9-331-sku-43043224/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=625 rpm i=4.8:1 SKU: 43043124](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2625-rpm-i4-81-sku-43043124/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 3 n2=833 rpm i=4.8:1 SKU: 43043024](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-3-n2833-rpm-i4-81-sku-43043024/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=79 rpm i=38:1 SKU: 43042524](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n279-rpm-i381-sku-43042524/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=100 rpm i=30:1 SKU: 43042424](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2100-rpm-i301-sku-43042424/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=130 rpm i=23:1 SKU: 43042324](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2130-rpm-i231-sku-43042324/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=200 rpm i=15:1 SKU: 43042224](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2200-rpm-i151-sku-43042224/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=261 rpm i=11.5:1 SKU: 43042124](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2261-rpm-i11-51-sku-43042124/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 2 n2=411 rpm i=7.3:1 SKU: 43042024](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-2-n2411-rpm-i7-31-sku-43042024/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC motor 24 V. Nominal motor speed 3000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 41 Insulation class according to VDE 0530: F Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=158 rpm i=38:1 SKU: 43041524](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2158-rpm-i381-sku-43041524/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=158 rpm i=38:1 SKU: 43041512](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2158-rpm-i381-sku-43041512/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=200 rpm i=30:1 SKU: 43041424](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2200-rpm-i301-sku-43041424/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=200 rpm i=30:1 SKU: 43041412](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2200-rpm-i301-sku-43041412/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=261 rpm i=23:1 SKU: 43041324](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2261-rpm-i231-sku-43041324/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=261 rpm i=23:1 SKU: 43041312](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2261-rpm-i231-sku-43041312/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=400 rpm i=15:1 SKU: 43041224](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2400-rpm-i151-sku-43041224/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 12V size 1 n2=400 rpm i=15:1 SKU: 43041212](https://maedler.in/product/small-geared-motor-se-with-dc-motor-12v-size-1-n2400-rpm-i151-sku-43041212/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Small geared motor SE with DC motor 24V size 1 n2=522 rpm i=11.5:1 SKU: 43041124](https://maedler.in/product/small-geared-motor-se-with-dc-motor-24v-size-1-n2522-rpm-i11-51-sku-43041124/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position. Teeth: Worm gear made from plastic, worm made from steel, ground. Not self-locking. Bearing: Motor and gearbox with roller bearing. Lubrication: Maintenance free grease lubrication. Motor: DC Motor 12 V or 24 V. Nominal motor speed 6000 rpm, worm pinned on motor shaft. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class according to VDE 0530: IP 21 Insulation class according to VDE 0530: E Operating mode as per VDE 0530: S1 - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681024](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681020](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681019](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681018](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681018/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681016](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681016/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 10 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681015](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-10-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681015/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRTG 10 B-1 5/8x3/8" 30 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678130](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 28 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678128](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 27 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678127](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 26 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678126](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 25 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678125](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 24 teeth material steel teeth hardened for taper bush type 2012 SKU: 10678124](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10678124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 23 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678123](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 22 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678122](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 21 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678121](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 20 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678120](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 19 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678119](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 18 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678118](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 17 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678117](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 16 teeth material steel teeth hardened for taper bush type 1610 SKU: 10678116](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10678116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 15 teeth material steel teeth hardened for taper bush type 1210 SKU: 10678115](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10678115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 14 teeth material steel teeth hardened for taper bush type 1108 SKU: 10678114](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-14-teeth-material-steel-teeth-hardened-for-taper-bush-type-1108-sku-10678114/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 10 B-1 5/8x3/8" 13 teeth material steel teeth hardened for taper bush type 1008 SKU: 10678113](https://maedler.in/product/sprocket-krtg-10-b-1-5-8x3-8-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-1008-sku-10678113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 114 teeth material cast iron for taper bush type 2517 SKU: 10677188G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-114-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10677188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 95 teeth material cast iron for taper bush type 2517 SKU: 10677183G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-95-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10677183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 76 teeth material cast iron for taper bush type 2012 SKU: 10677176G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-76-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10677176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 57 teeth material cast iron for taper bush type 2012 SKU: 10677157G](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-57-teeth-material-cast-iron-for-taper-bush-type-2012-sku-10677157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 57 teeth material steel for taper bush type 2012 SKU: 10677157](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-57-teeth-material-steel-for-taper-bush-type-2012-sku-10677157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 45 teeth material steel for taper bush type 2012 SKU: 10677145](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-45-teeth-material-steel-for-taper-bush-type-2012-sku-10677145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 38 teeth material steel for taper bush type 2012 SKU: 10677138](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-38-teeth-material-steel-for-taper-bush-type-2012-sku-10677138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 30 teeth material steel for taper bush type 2012 SKU: 10677130](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-30-teeth-material-steel-for-taper-bush-type-2012-sku-10677130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 28 teeth material steel for taper bush type 2012 SKU: 10677128](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-28-teeth-material-steel-for-taper-bush-type-2012-sku-10677128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 27 teeth material steel for taper bush type 2012 SKU: 10677127](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-27-teeth-material-steel-for-taper-bush-type-2012-sku-10677127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 26 teeth material steel for taper bush type 2012 SKU: 10677126](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-26-teeth-material-steel-for-taper-bush-type-2012-sku-10677126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 25 teeth material steel for taper bush type 2012 SKU: 10677125](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-25-teeth-material-steel-for-taper-bush-type-2012-sku-10677125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 24 teeth material steel for taper bush type 2012 SKU: 10677124](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-24-teeth-material-steel-for-taper-bush-type-2012-sku-10677124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 23 teeth material steel for taper bush type 1610 SKU: 10677123](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-23-teeth-material-steel-for-taper-bush-type-1610-sku-10677123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 22 teeth material steel for taper bush type 1610 SKU: 10677122](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-22-teeth-material-steel-for-taper-bush-type-1610-sku-10677122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 21 teeth material steel for taper bush type 1610 SKU: 10677121](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-21-teeth-material-steel-for-taper-bush-type-1610-sku-10677121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 20 teeth material steel for taper bush type 1610 SKU: 10677120](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-20-teeth-material-steel-for-taper-bush-type-1610-sku-10677120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 19 teeth material steel for taper bush type 1610 SKU: 10677119](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-19-teeth-material-steel-for-taper-bush-type-1610-sku-10677119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 18 teeth material steel for taper bush type 1610 SKU: 10677118](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-18-teeth-material-steel-for-taper-bush-type-1610-sku-10677118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 17 teeth material steel for taper bush type 1610 SKU: 10677117](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-17-teeth-material-steel-for-taper-bush-type-1610-sku-10677117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 16 teeth material steel for taper bush type 1610 SKU: 10677116](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-16-teeth-material-steel-for-taper-bush-type-1610-sku-10677116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 15 teeth material steel for taper bush type 1210 SKU: 10677115](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-15-teeth-material-steel-for-taper-bush-type-1210-sku-10677115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 14 teeth material steel for taper bush type 1108 SKU: 10677114](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-14-teeth-material-steel-for-taper-bush-type-1108-sku-10677114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 10 B-1 5/8x3/8" 13 teeth material steel for taper bush type 1008 SKU: 10677113](https://maedler.in/product/sprocket-krt-10-b-1-5-8x3-8-13-teeth-material-steel-for-taper-bush-type-1008-sku-10677113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At sprockets 10677183G and 10677188G, the teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 114 teeth material steel SKU: 10628800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-114-teeth-material-steel-sku-10628800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 95 teeth material steel SKU: 10628300](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-95-teeth-material-steel-sku-10628300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 80 teeth material steel SKU: 10628000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-80-teeth-material-steel-sku-10628000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 76 teeth material steel SKU: 10627600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-76-teeth-material-steel-sku-10627600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 72 teeth material steel SKU: 10627200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-72-teeth-material-steel-sku-10627200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 70 teeth material steel SKU: 10627000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-70-teeth-material-steel-sku-10627000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 65 teeth material steel SKU: 10626500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-65-teeth-material-steel-sku-10626500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 60 teeth material steel SKU: 10626000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-60-teeth-material-steel-sku-10626000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 57 teeth material steel SKU: 10625700](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-57-teeth-material-steel-sku-10625700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 54 teeth material steel SKU: 10625400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-54-teeth-material-steel-sku-10625400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 50 teeth material steel SKU: 10625000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-50-teeth-material-steel-sku-10625000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 48 teeth material steel SKU: 10624800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-48-teeth-material-steel-sku-10624800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 46 teeth material steel SKU: 10624600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-46-teeth-material-steel-sku-10624600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 45 teeth material steel SKU: 10624500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-45-teeth-material-steel-sku-10624500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 44 teeth material steel SKU: 10624400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-44-teeth-material-steel-sku-10624400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 42 teeth material steel SKU: 10624200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-42-teeth-material-steel-sku-10624200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 40 teeth material steel SKU: 10624000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-40-teeth-material-steel-sku-10624000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 38 teeth material steel SKU: 10623800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-38-teeth-material-steel-sku-10623800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 36 teeth material steel SKU: 10623600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-36-teeth-material-steel-sku-10623600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 35 teeth material steel SKU: 10623500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-35-teeth-material-steel-sku-10623500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 34 teeth material steel SKU: 10623400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-34-teeth-material-steel-sku-10623400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 32 teeth material steel SKU: 10623200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-32-teeth-material-steel-sku-10623200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 30 teeth material steel SKU: 10623000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-30-teeth-material-steel-sku-10623000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 29 teeth material steel SKU: 10622900](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-29-teeth-material-steel-sku-10622900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 28 teeth material steel SKU: 10622800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-28-teeth-material-steel-sku-10622800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 27 teeth material steel SKU: 10622700](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-27-teeth-material-steel-sku-10622700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 26 teeth material steel SKU: 10622600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-26-teeth-material-steel-sku-10622600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 25 teeth material steel SKU: 10622500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-25-teeth-material-steel-sku-10622500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 24 teeth material steel SKU: 10622400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-24-teeth-material-steel-sku-10622400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 23 teeth material steel SKU: 10622300](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-23-teeth-material-steel-sku-10622300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 22 teeth material steel SKU: 10622200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-22-teeth-material-steel-sku-10622200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 21 teeth material steel SKU: 10622100](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-21-teeth-material-steel-sku-10622100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 20 teeth material steel SKU: 10622000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-20-teeth-material-steel-sku-10622000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 19 teeth material steel SKU: 10621900](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-19-teeth-material-steel-sku-10621900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 18 teeth material steel SKU: 10621800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-18-teeth-material-steel-sku-10621800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 17 teeth material steel SKU: 10621700](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-17-teeth-material-steel-sku-10621700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 16 teeth material steel SKU: 10621600](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-16-teeth-material-steel-sku-10621600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 15 teeth material steel SKU: 10621500](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-15-teeth-material-steel-sku-10621500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 14 teeth material steel SKU: 10621400](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-14-teeth-material-steel-sku-10621400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 13 teeth material steel SKU: 10621300](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-13-teeth-material-steel-sku-10621300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 12 teeth material steel SKU: 10621200](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-12-teeth-material-steel-sku-10621200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 11 teeth material steel SKU: 10621100](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-11-teeth-material-steel-sku-10621100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 10 teeth material steel SKU: 10621000](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-10-teeth-material-steel-sku-10621000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 9 teeth material steel SKU: 10620900](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-9-teeth-material-steel-sku-10620900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 10 B-1 5/8x3/8" 8 teeth material steel SKU: 10620800](https://maedler.in/product/plate-wheel-krl-without-hub-10-b-1-5-8x3-8-8-teeth-material-steel-sku-10620800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 114 teeth material cast iron SKU: 10618800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-114-teeth-material-cast-iron-sku-10618800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 95 teeth material cast iron SKU: 10618300](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-95-teeth-material-cast-iron-sku-10618300/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 76 teeth material cast iron SKU: 10617600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-76-teeth-material-cast-iron-sku-10617600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 57 teeth material cast iron SKU: 10615700](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-57-teeth-material-cast-iron-sku-10615700/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 45 teeth material cast iron SKU: 10614500](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-45-teeth-material-cast-iron-sku-10614500/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 40 teeth material steel SKU: 10614000](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-40-teeth-material-steel-sku-10614000/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 38 teeth material steel SKU: 10613800](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-38-teeth-material-steel-sku-10613800/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Sprocket KRS with hub 10 B-1 5/8x3/8" 36 teeth material steel SKU: 10613600](https://maedler.in/product/sprocket-krs-with-hub-10-b-1-5-8x3-8-36-teeth-material-steel-sku-10613600/): Material: Steel C45, not hardened. Pre-bored.Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Shim ring DIN 988 40 x 50 x 0,3 material steel DC01 C590 SKU: 624340504](https://maedler.in/product/shim-ring-din-988-40-x-50-x-03-material-steel-dc01-c590-sku-624340504/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 40 x 50 x 0,25 material steel DC01 C590 SKU: 624340503](https://maedler.in/product/shim-ring-din-988-40-x-50-x-025-material-steel-dc01-c590-sku-624340503/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 40 x 50 x 0,2 material steel DC01 C590 SKU: 624340502](https://maedler.in/product/shim-ring-din-988-40-x-50-x-02-material-steel-dc01-c590-sku-624340502/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 40 x 50 x 0,15 material steel DC01 C590 SKU: 624340501](https://maedler.in/product/shim-ring-din-988-40-x-50-x-015-material-steel-dc01-c590-sku-624340501/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 40 x 50 x 0,1 material steel DC01 C590 SKU: 624340500](https://maedler.in/product/shim-ring-din-988-40-x-50-x-01-material-steel-dc01-c590-sku-624340500/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 2 material steel DC01 C590 SKU: 624337479](https://maedler.in/product/shim-ring-din-988-37-x-47-x-2-material-steel-dc01-c590-sku-624337479/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 1,5 material steel DC01 C590 SKU: 624337478](https://maedler.in/product/shim-ring-din-988-37-x-47-x-15-material-steel-dc01-c590-sku-624337478/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 1,2 material steel DC01 C590 SKU: 624337477](https://maedler.in/product/shim-ring-din-988-37-x-47-x-12-material-steel-dc01-c590-sku-624337477/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 1 material steel DC01 C590 SKU: 624337476](https://maedler.in/product/shim-ring-din-988-37-x-47-x-1-material-steel-dc01-c590-sku-624337476/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 0,5 material steel DC01 C590 SKU: 624337475](https://maedler.in/product/shim-ring-din-988-37-x-47-x-05-material-steel-dc01-c590-sku-624337475/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 0,3 material steel DC01 C590 SKU: 624337474](https://maedler.in/product/shim-ring-din-988-37-x-47-x-03-material-steel-dc01-c590-sku-624337474/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 0,25 material steel DC01 C590 SKU: 624337473](https://maedler.in/product/shim-ring-din-988-37-x-47-x-025-material-steel-dc01-c590-sku-624337473/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 0,2 material steel DC01 C590 SKU: 624337472](https://maedler.in/product/shim-ring-din-988-37-x-47-x-02-material-steel-dc01-c590-sku-624337472/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 0,15 material steel DC01 C590 SKU: 624337471](https://maedler.in/product/shim-ring-din-988-37-x-47-x-015-material-steel-dc01-c590-sku-624337471/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 37 x 47 x 0,1 material steel DC01 C590 SKU: 624337470](https://maedler.in/product/shim-ring-din-988-37-x-47-x-01-material-steel-dc01-c590-sku-624337470/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 2 material steel DC01 C590 SKU: 624336459](https://maedler.in/product/shim-ring-din-988-36-x-45-x-2-material-steel-dc01-c590-sku-624336459/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 1,5 material steel DC01 C590 SKU: 624336458](https://maedler.in/product/shim-ring-din-988-36-x-45-x-15-material-steel-dc01-c590-sku-624336458/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 1,2 material steel DC01 C590 SKU: 624336457](https://maedler.in/product/shim-ring-din-988-36-x-45-x-12-material-steel-dc01-c590-sku-624336457/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 1 material steel DC01 C590 SKU: 624336456](https://maedler.in/product/shim-ring-din-988-36-x-45-x-1-material-steel-dc01-c590-sku-624336456/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 0,5 material steel DC01 C590 SKU: 624336455](https://maedler.in/product/shim-ring-din-988-36-x-45-x-05-material-steel-dc01-c590-sku-624336455/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 0,3 material steel DC01 C590 SKU: 624336454](https://maedler.in/product/shim-ring-din-988-36-x-45-x-03-material-steel-dc01-c590-sku-624336454/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 0,25 material steel DC01 C590 SKU: 624336453](https://maedler.in/product/shim-ring-din-988-36-x-45-x-025-material-steel-dc01-c590-sku-624336453/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 0,2 material steel DC01 C590 SKU: 624336452](https://maedler.in/product/shim-ring-din-988-36-x-45-x-02-material-steel-dc01-c590-sku-624336452/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 0,15 material steel DC01 C590 SKU: 624336451](https://maedler.in/product/shim-ring-din-988-36-x-45-x-015-material-steel-dc01-c590-sku-624336451/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 36 x 45 x 0,1 material steel DC01 C590 SKU: 624336450](https://maedler.in/product/shim-ring-din-988-36-x-45-x-01-material-steel-dc01-c590-sku-624336450/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 2 material steel DC01 C590 SKU: 624335459](https://maedler.in/product/shim-ring-din-988-35-x-45-x-2-material-steel-dc01-c590-sku-624335459/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 1,5 material steel DC01 C590 SKU: 624335458](https://maedler.in/product/shim-ring-din-988-35-x-45-x-15-material-steel-dc01-c590-sku-624335458/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 1,2 material steel DC01 C590 SKU: 624335457](https://maedler.in/product/shim-ring-din-988-35-x-45-x-12-material-steel-dc01-c590-sku-624335457/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 1 material steel DC01 C590 SKU: 624335456](https://maedler.in/product/shim-ring-din-988-35-x-45-x-1-material-steel-dc01-c590-sku-624335456/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 0,5 material steel DC01 C590 SKU: 624335455](https://maedler.in/product/shim-ring-din-988-35-x-45-x-05-material-steel-dc01-c590-sku-624335455/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 0,3 material steel DC01 C590 SKU: 624335454](https://maedler.in/product/shim-ring-din-988-35-x-45-x-03-material-steel-dc01-c590-sku-624335454/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 0,25 material steel DC01 C590 SKU: 624335453](https://maedler.in/product/shim-ring-din-988-35-x-45-x-025-material-steel-dc01-c590-sku-624335453/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 0,2 material steel DC01 C590 SKU: 624335452](https://maedler.in/product/shim-ring-din-988-35-x-45-x-02-material-steel-dc01-c590-sku-624335452/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 0,15 material steel DC01 C590 SKU: 624335451](https://maedler.in/product/shim-ring-din-988-35-x-45-x-015-material-steel-dc01-c590-sku-624335451/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 35 x 45 x 0,1 material steel DC01 C590 SKU: 624335450](https://maedler.in/product/shim-ring-din-988-35-x-45-x-01-material-steel-dc01-c590-sku-624335450/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 2 material steel DC01 C590 SKU: 624332459](https://maedler.in/product/shim-ring-din-988-32-x-45-x-2-material-steel-dc01-c590-sku-624332459/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 1,5 material steel DC01 C590 SKU: 624332458](https://maedler.in/product/shim-ring-din-988-32-x-45-x-15-material-steel-dc01-c590-sku-624332458/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 1,2 material steel DC01 C590 SKU: 624332457](https://maedler.in/product/shim-ring-din-988-32-x-45-x-12-material-steel-dc01-c590-sku-624332457/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 1 material steel DC01 C590 SKU: 624332456](https://maedler.in/product/shim-ring-din-988-32-x-45-x-1-material-steel-dc01-c590-sku-624332456/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 0,5 material steel DC01 C590 SKU: 624332455](https://maedler.in/product/shim-ring-din-988-32-x-45-x-05-material-steel-dc01-c590-sku-624332455/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 0,3 material steel DC01 C590 SKU: 624332454](https://maedler.in/product/shim-ring-din-988-32-x-45-x-03-material-steel-dc01-c590-sku-624332454/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 0,25 material steel DC01 C590 SKU: 624332453](https://maedler.in/product/shim-ring-din-988-32-x-45-x-025-material-steel-dc01-c590-sku-624332453/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 0,2 material steel DC01 C590 SKU: 624332452](https://maedler.in/product/shim-ring-din-988-32-x-45-x-02-material-steel-dc01-c590-sku-624332452/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 0,15 material steel DC01 C590 SKU: 624332451](https://maedler.in/product/shim-ring-din-988-32-x-45-x-015-material-steel-dc01-c590-sku-624332451/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 32 x 45 x 0,1 material steel DC01 C590 SKU: 624332450](https://maedler.in/product/shim-ring-din-988-32-x-45-x-01-material-steel-dc01-c590-sku-624332450/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 2 material steel DC01 C590 SKU: 624330429](https://maedler.in/product/shim-ring-din-988-30-x-42-x-2-material-steel-dc01-c590-sku-624330429/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 1,5 material steel DC01 C590 SKU: 624330428](https://maedler.in/product/shim-ring-din-988-30-x-42-x-15-material-steel-dc01-c590-sku-624330428/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 1,2 material steel DC01 C590 SKU: 624330427](https://maedler.in/product/shim-ring-din-988-30-x-42-x-12-material-steel-dc01-c590-sku-624330427/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 1 material steel DC01 C590 SKU: 624330426](https://maedler.in/product/shim-ring-din-988-30-x-42-x-1-material-steel-dc01-c590-sku-624330426/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 0,5 material steel DC01 C590 SKU: 624330425](https://maedler.in/product/shim-ring-din-988-30-x-42-x-05-material-steel-dc01-c590-sku-624330425/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 0,3 material steel DC01 C590 SKU: 624330424](https://maedler.in/product/shim-ring-din-988-30-x-42-x-03-material-steel-dc01-c590-sku-624330424/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 0,25 material steel DC01 C590 SKU: 624330423](https://maedler.in/product/shim-ring-din-988-30-x-42-x-025-material-steel-dc01-c590-sku-624330423/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 0,2 material steel DC01 C590 SKU: 624330422](https://maedler.in/product/shim-ring-din-988-30-x-42-x-02-material-steel-dc01-c590-sku-624330422/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 0,15 material steel DC01 C590 SKU: 624330421](https://maedler.in/product/shim-ring-din-988-30-x-42-x-015-material-steel-dc01-c590-sku-624330421/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 30 x 42 x 0,1 material steel DC01 C590 SKU: 624330420](https://maedler.in/product/shim-ring-din-988-30-x-42-x-01-material-steel-dc01-c590-sku-624330420/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 28 x 40 x 1,5 material steel DC01 C590 SKU: 624328408](https://maedler.in/product/shim-ring-din-988-28-x-40-x-15-material-steel-dc01-c590-sku-624328408/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 28 x 40 x 1,2 material steel DC01 C590 SKU: 624328407](https://maedler.in/product/shim-ring-din-988-28-x-40-x-12-material-steel-dc01-c590-sku-624328407/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 28 x 40 x 1 material steel DC01 C590 SKU: 624328406](https://maedler.in/product/shim-ring-din-988-28-x-40-x-1-material-steel-dc01-c590-sku-624328406/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 28 x 40 x 0,5 material steel DC01 C590 SKU: 624328405](https://maedler.in/product/shim-ring-din-988-28-x-40-x-05-material-steel-dc01-c590-sku-624328405/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 28 x 40 x 0,3 material steel DC01 C590 SKU: 624328404](https://maedler.in/product/shim-ring-din-988-28-x-40-x-03-material-steel-dc01-c590-sku-624328404/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 28 x 40 x 0,25 material steel DC01 C590 SKU: 624328403](https://maedler.in/product/shim-ring-din-988-28-x-40-x-025-material-steel-dc01-c590-sku-624328403/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 28 x 40 x 0,2 material steel DC01 C590 SKU: 624328402](https://maedler.in/product/shim-ring-din-988-28-x-40-x-02-material-steel-dc01-c590-sku-624328402/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 28 x 40 x 0,15 material steel DC01 C590 SKU: 624328401](https://maedler.in/product/shim-ring-din-988-28-x-40-x-015-material-steel-dc01-c590-sku-624328401/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 28 x 40 x 0,1 material steel DC01 C590 SKU: 624328400](https://maedler.in/product/shim-ring-din-988-28-x-40-x-01-material-steel-dc01-c590-sku-624328400/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 26 x 37 x 1,5 material steel DC01 C590 SKU: 624326378](https://maedler.in/product/shim-ring-din-988-26-x-37-x-15-material-steel-dc01-c590-sku-624326378/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 26 x 37 x 1,2 material steel DC01 C590 SKU: 624326377](https://maedler.in/product/shim-ring-din-988-26-x-37-x-12-material-steel-dc01-c590-sku-624326377/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 26 x 37 x 1 material steel DC01 C590 SKU: 624326376](https://maedler.in/product/shim-ring-din-988-26-x-37-x-1-material-steel-dc01-c590-sku-624326376/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 26 x 37 x 0,5 material steel DC01 C590 SKU: 624326375](https://maedler.in/product/shim-ring-din-988-26-x-37-x-05-material-steel-dc01-c590-sku-624326375/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 26 x 37 x 0,3 material steel DC01 C590 SKU: 624326374](https://maedler.in/product/shim-ring-din-988-26-x-37-x-03-material-steel-dc01-c590-sku-624326374/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 26 x 37 x 0,25 material steel DC01 C590 SKU: 624326373](https://maedler.in/product/shim-ring-din-988-26-x-37-x-025-material-steel-dc01-c590-sku-624326373/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 26 x 37 x 0,2 material steel DC01 C590 SKU: 624326372](https://maedler.in/product/shim-ring-din-988-26-x-37-x-02-material-steel-dc01-c590-sku-624326372/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 26 x 37 x 0,15 material steel DC01 C590 SKU: 624326371](https://maedler.in/product/shim-ring-din-988-26-x-37-x-015-material-steel-dc01-c590-sku-624326371/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 26 x 37 x 0,1 material steel DC01 C590 SKU: 624326370](https://maedler.in/product/shim-ring-din-988-26-x-37-x-01-material-steel-dc01-c590-sku-624326370/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 25 x 35 x 1,5 material steel DC01 C590 SKU: 624325358](https://maedler.in/product/shim-ring-din-988-25-x-35-x-15-material-steel-dc01-c590-sku-624325358/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 25 x 35 x 1,2 material steel DC01 C590 SKU: 624325357](https://maedler.in/product/shim-ring-din-988-25-x-35-x-12-material-steel-dc01-c590-sku-624325357/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 25 x 35 x 1 material steel DC01 C590 SKU: 624325356](https://maedler.in/product/shim-ring-din-988-25-x-35-x-1-material-steel-dc01-c590-sku-624325356/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 25 x 35 x 0,5 material steel DC01 C590 SKU: 624325355](https://maedler.in/product/shim-ring-din-988-25-x-35-x-05-material-steel-dc01-c590-sku-624325355/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 25 x 35 x 0,3 material steel DC01 C590 SKU: 624325354](https://maedler.in/product/shim-ring-din-988-25-x-35-x-03-material-steel-dc01-c590-sku-624325354/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 25 x 35 x 0,25 material steel DC01 C590 SKU: 624325353](https://maedler.in/product/shim-ring-din-988-25-x-35-x-025-material-steel-dc01-c590-sku-624325353/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 25 x 35 x 0,2 material steel DC01 C590 SKU: 624325352](https://maedler.in/product/shim-ring-din-988-25-x-35-x-02-material-steel-dc01-c590-sku-624325352/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 25 x 35 x 0,15 material steel DC01 C590 SKU: 624325351](https://maedler.in/product/shim-ring-din-988-25-x-35-x-015-material-steel-dc01-c590-sku-624325351/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 25 x 35 x 0,1 material steel DC01 C590 SKU: 624325350](https://maedler.in/product/shim-ring-din-988-25-x-35-x-01-material-steel-dc01-c590-sku-624325350/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 22 x 30 x 1,5 material steel DC01 C590 SKU: 624322308](https://maedler.in/product/shim-ring-din-988-22-x-30-x-15-material-steel-dc01-c590-sku-624322308/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 22 x 30 x 1,2 material steel DC01 C590 SKU: 624322307](https://maedler.in/product/shim-ring-din-988-22-x-30-x-12-material-steel-dc01-c590-sku-624322307/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 22 x 30 x 1 material steel DC01 C590 SKU: 624322306](https://maedler.in/product/shim-ring-din-988-22-x-30-x-1-material-steel-dc01-c590-sku-624322306/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 22 x 30 x 0,5 material steel DC01 C590 SKU: 624322305](https://maedler.in/product/shim-ring-din-988-22-x-30-x-05-material-steel-dc01-c590-sku-624322305/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 22 x 30 x 0,3 material steel DC01 C590 SKU: 624322304](https://maedler.in/product/shim-ring-din-988-22-x-30-x-03-material-steel-dc01-c590-sku-624322304/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 22 x 30 x 0,25 material steel DC01 C590 SKU: 624322303](https://maedler.in/product/shim-ring-din-988-22-x-30-x-025-material-steel-dc01-c590-sku-624322303/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 22 x 30 x 0,2 material steel DC01 C590 SKU: 624322302](https://maedler.in/product/shim-ring-din-988-22-x-30-x-02-material-steel-dc01-c590-sku-624322302/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 22 x 30 x 0,15 material steel DC01 C590 SKU: 624322301](https://maedler.in/product/shim-ring-din-988-22-x-30-x-015-material-steel-dc01-c590-sku-624322301/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 22 x 30 x 0,1 material steel DC01 C590 SKU: 624322300](https://maedler.in/product/shim-ring-din-988-22-x-30-x-01-material-steel-dc01-c590-sku-624322300/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 20 x 28 x 1,5 material steel DC01 C590 SKU: 624320288](https://maedler.in/product/shim-ring-din-988-20-x-28-x-15-material-steel-dc01-c590-sku-624320288/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 20 x 28 x 1,2 material steel DC01 C590 SKU: 624320287](https://maedler.in/product/shim-ring-din-988-20-x-28-x-12-material-steel-dc01-c590-sku-624320287/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 20 x 28 x 1 material steel DC01 C590 SKU: 624320286](https://maedler.in/product/shim-ring-din-988-20-x-28-x-1-material-steel-dc01-c590-sku-624320286/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 20 x 28 x 0,5 material steel DC01 C590 SKU: 624320285](https://maedler.in/product/shim-ring-din-988-20-x-28-x-05-material-steel-dc01-c590-sku-624320285/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 20 x 28 x 0,3 material steel DC01 C590 SKU: 624320284](https://maedler.in/product/shim-ring-din-988-20-x-28-x-03-material-steel-dc01-c590-sku-624320284/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 20 x 28 x 0,25 material steel DC01 C590 SKU: 624320283](https://maedler.in/product/shim-ring-din-988-20-x-28-x-025-material-steel-dc01-c590-sku-624320283/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 20 x 28 x 0,2 material steel DC01 C590 SKU: 624320282](https://maedler.in/product/shim-ring-din-988-20-x-28-x-02-material-steel-dc01-c590-sku-624320282/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 20 x 28 x 0,15 material steel DC01 C590 SKU: 624320281](https://maedler.in/product/shim-ring-din-988-20-x-28-x-015-material-steel-dc01-c590-sku-624320281/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 20 x 28 x 0,1 material steel DC01 C590 SKU: 624320280](https://maedler.in/product/shim-ring-din-988-20-x-28-x-01-material-steel-dc01-c590-sku-624320280/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =142 rpm Md2 =35 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205590](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-142-rpm-md2-35-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =123 rpm Md2 =41 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205585](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-123-rpm-md2-41-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =107 rpm Md2 =47 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205580](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-107-rpm-md2-47-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =91 rpm Md2 =55 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205575](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-91-rpm-md2-55-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432055/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =86 rpm Md2 =58 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205570](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-86-rpm-md2-58-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432055/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =74 rpm Md2 =68 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205565](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-74-rpm-md2-68-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432055/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =63 rpm Md2=80 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205560](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-63-rpm-md280-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320556/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =47.6 rpm Md2=106 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205555](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-47-6-rpm-md2106-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =39 rpm Md2=129 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205550](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-39-rpm-md2129-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432055/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =34.6 rpm Md2=146 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205545](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-34-6-rpm-md2146-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =29.6 rpm Md2=165 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205540](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-29-6-rpm-md2165-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =25.6 rpm Md2=191 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205535](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-25-6-rpm-md2191-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =21.1 rpm Md2=231 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205530](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-21-1-rpm-md2231-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =18.3 rpm Md2=268 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205525](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-18-3-rpm-md2268-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =15.1 rpm Md2=324 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205520](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-15-1-rpm-md2324-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =13.4 rpm Md2=365 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205515](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-13-4-rpm-md2365-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =11.1 rpm Md2=442 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205510](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-11-1-rpm-md2442-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =8.5 rpm Md2=577 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205505](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-8-5-rpm-md2577-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Output flange for helical geared motor HR/I gearbox size 50/2, 50/3 and 60/3 diameter 250mm overall height 19,5mm SKU: 43205025](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-50-2-50-3-and-60-3-diameter-250mm-overall-height-195mm-sku-43205025/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 50/2, 50/3 and 60/3 diameter 200mm overall height 16,5mm SKU: 43205020](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-50-2-50-3-and-60-3-diameter-200mm-overall-height-165mm-sku-43205020/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 50/2, 50/3 and 60/3 diameter 160mm overall height 17,5mm SKU: 43205016](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-50-2-50-3-and-60-3-diameter-160mm-overall-height-175mm-sku-43205016/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 40/2 and 40/3 diameter 200mm overall height 14,5m SKU: 43204020](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-40-2-and-40-3-diameter-200mm-overall-height-145m-sku-43204020/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 40/2 and 40/3 diameter 160mm overall height 13mm SKU: 43204016](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-40-2-and-40-3-diameter-160mm-overall-height-13mm-sku-43204016/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 40/2 and 40/3 diameter 140mm overall height 13mm SKU: 43204014](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-40-2-and-40-3-diameter-140mm-overall-height-13mm-sku-43204014/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 40/2 and 40/3 diameter 120mm overall height 13mm SKU: 43204012](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-40-2-and-40-3-diameter-120mm-overall-height-13mm-sku-43204012/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =181 rpm Md2=19 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203780](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-181-rpm-md219-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432037/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =142 rpm Md2=24 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203775](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-142-rpm-md224-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432037/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =123 rpm Md2=28 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203770](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-123-rpm-md228-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432037/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =107 rpm Md2=32 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203765](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-107-rpm-md232-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432037/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =86 rpm Md2=39 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203760](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-86-rpm-md239-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320376/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =75 rpm Md2=46 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203755](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-75-rpm-md246-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320375/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =64 rpm Md2=53 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203750](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-64-rpm-md253-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320375/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =48.5 rpm Md2=70 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203745](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-48-5-rpm-md270-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43203/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =39 rpm Md2=87 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203740](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-39-rpm-md287-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320374/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =36.5 rpm Md2=90 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203735](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-36-5-rpm-md290-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43203/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =29.9 rpm Md2=114 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203730](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-29-9-rpm-md2114-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0,37kW 230/400V 50Hz model B3 IE2 n2 =25.6 rpm Md2=128 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203725](https://maedler.in/product/helical-geared-motor-hr-i-037kw-230-400v-50hz-model-b3-ie2-n2-25-6-rpm-md2128-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =21.1 rpm Md2=155 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203720](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-21-1-rpm-md2155-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =18.3 rpm Md2=180 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203715](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-18-3-rpm-md2180-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =15.1 rpm Md2=218 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203710](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-15-1-rpm-md2218-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.37kW 230/400V 50Hz model B3 IE2 n2 =7.8 rpm Md2=423 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43203705](https://maedler.in/product/helical-geared-motor-hr-i-0-37kw-230-400v-50hz-model-b3-ie2-n2-7-8-rpm-md2423-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43203/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =257 rpm Md2=9 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202585](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-257-rpm-md29-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320258/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =194 rpm Md2=12 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202580](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-194-rpm-md212-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432025/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =142 rpm Md2=16 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202575](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-142-rpm-md216-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432025/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =123 rpm Md2=19 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202570](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-123-rpm-md219-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432025/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =107 rpm Md2=21 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202565](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-107-rpm-md221-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432025/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =75 rpm Md2=31 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202560](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-75-rpm-md231-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320256/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =64 rpm Md2=36 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202555](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-64-rpm-md236-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320255/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =48.5 rpm Md2=47 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202550](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-48-5-rpm-md247-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =37.1 rpm Md2=62 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202545](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-37-1-rpm-md262-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =32 rpm Md2=69 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202540](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-32-rpm-md269-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320254/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =27.6 rpm Md2=80 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202535](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-27-6-rpm-md280-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =22.9 rpm Md2=97 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202530](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-22-9-rpm-md297-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =19.7 rpm Md2=113 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202525](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-19-7-rpm-md2113-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =15.1 rpm Md2=147 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202520](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-15-1-rpm-md2147-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =10.2 rpm Md2=217 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202515](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-10-2-rpm-md2217-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =7.8 rpm Md2=286 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202510](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-7-8-rpm-md2286-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.25kW 230/400V 50Hz model B3 IE2 n2 =5.8 rpm Md2=384 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43202505](https://maedler.in/product/helical-geared-motor-hr-i-0-25kw-230-400v-50hz-model-b3-ie2-n2-5-8-rpm-md2384-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43202/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Output flange for helical geared motor HR/I gearbox size 20/2 and 30/2 diameter 200mm overall height 15mm SKU: 43202020](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-20-2-and-30-2-diameter-200mm-overall-height-15mm-sku-43202020/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 20/2 and 30/2 diameter 160mm overall height 15mm SKU: 43202016](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-20-2-and-30-2-diameter-160mm-overall-height-15mm-sku-43202016/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 20/2 and 30/2 diameter 140mm overall height 14.5mm SKU: 43202014](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-20-2-and-30-2-diameter-140mm-overall-height-14-5mm-sku-43202014/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Output flange for helical geared motor HR/I gearbox size 20/2 and 30/2 diameter 120mm overall height 14.5mm SKU: 43202012](https://maedler.in/product/output-flange-for-helical-geared-motor-hr-i-gearbox-size-20-2-and-30-2-diameter-120mm-overall-height-14-5mm-sku-43202012/): Material: Aluminium Output-side flange for helical geared motor HR/I to be mounted by the customer, for modification from foot mounting B3 to flange mounting B5. For every gearbox size there are flanges in several, common diameters available. The flange is supplied with the required mounting screws and can be easily screwed on. The screwed on foot mounting can be taken off the gearbox, if required. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =123 rpm Md2=13 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201870](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-123-rpm-md213-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432018/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =93 rpm Md2=18 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201865](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-93-rpm-md218-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320186/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =86 rpm Md2=19 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201860](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-86-rpm-md219-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320186/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =75 rpm Md2=22 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201855](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-75-rpm-md222-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320185/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =64 rpm Md2=26 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201850](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-64-rpm-md226-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320185/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =48.5 rpm Md2=34 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201845](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-48-5-rpm-md234-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =39 rpm Md2=42 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201840](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-39-rpm-md242-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320184/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =32 rpm Md2=50 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201835](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-32-rpm-md250-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320183/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =27.6 rpm Md2=58 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201830](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-27-6-rpm-md258-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =22.9 rpm Md2 =70 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201825](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-22-9-rpm-md2-70-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =19.7 rpm Md2=81 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201820](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-19-7-rpm-md281-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =16.2 rpm Md2=99 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201815](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-16-2-rpm-md299-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =13.6 rpm Md2=117 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201810](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-13-6-rpm-md2117-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.18kW 230/400V 50Hz model B3 IE2 n2 =10.3 rpm Md2=155 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201805](https://maedler.in/product/helical-geared-motor-hr-i-0-18kw-230-400v-50hz-model-b3-ie2-n2-10-3-rpm-md2155-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2 =53 rpm Md2=22 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201250](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n2-53-rpm-md222-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320125/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2 =48.5 rpm Md2=25 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201245](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n2-48-5-rpm-md225-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2 =37.1 rpm Md2=32 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201240](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n2-37-1-rpm-md232-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=28.1 rpm Md2=42 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201235](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n228-1-rpm-md242-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=22.6 rpm Md2=53 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201230](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n222-6-rpm-md253-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=19.1 rpm Md2=61 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201225](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n219-1-rpm-md261-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=16.2 rpm Md2=72 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201220](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n216-2-rpm-md272-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=13.6 rpm Md2=85 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201215](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n213-6-rpm-md285-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=10.3 rpm Md2=112 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201210](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n210-3-rpm-md2112-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43201/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.12kW 230/400V 50Hz model B3 IE2 n2=7.9 rpm Md2=146 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43201205](https://maedler.in/product/helical-geared-motor-hr-i-0-12kw-230-400v-50hz-model-b3-ie2-n27-9-rpm-md2146-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432012/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=123 rpm Md2=7 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200965](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n2123-rpm-md27-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200965/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=107 rpm Md2=8 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200960](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n2107-rpm-md28-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200960/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=93 rpm Md2=9 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200955](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n293-rpm-md29-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200955/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=75 rpm Md2=11 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200950](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n275-rpm-md211-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200950/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=66 rpm Md2=12 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200945](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n266-rpm-md212-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200945/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=53 rpm Md2=16 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200940](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n253-rpm-md216-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43200940/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=37.1 rpm Md2=22 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200935](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n237-1-rpm-md222-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=28.1 rpm Md2=29 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200930](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n228-1-rpm-md229-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=22.6 rpm Md2=36 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200925](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n222-6-rpm-md236-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=14,5 rpm Md2=55 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200920](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n2145-rpm-md255-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=10.3 rpm Md2=77 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200915](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n210-3-rpm-md277-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=7.9 rpm Md2=101 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200910](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n27-9-rpm-md2101-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.09kW 230/400V 50Hz model B3 IE1 n2=5.1 rpm Md2=157 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43200905](https://maedler.in/product/helical-geared-motor-hr-i-0-09kw-230-400v-50hz-model-b3-ie1-n25-1-rpm-md2157-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432009/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Small worm geared motor SG with permament magnet DC motor 24V 56W n2=1000/min i=3:1 output shaft side 2 SKU: 43049216](https://maedler.in/product/small-worm-geared-motor-sg-with-permament-magnet-dc-motor-24v-56w-n21000-min-i31-output-shaft-side-2-sku-43049216/): Housing: Aluminium, sealed against lubricant leaks and protected against dust, can be mounted in any position.Output shaft: on side 2.Teeth: Worm gear made from special bronze, worm made from steel, hardened and ground.Bearing: Motor and gearbox with roller bearing.Lubrication: Maintenance free grease lubrication.Motor: Permament magnet DC Motor 24 V.Nominal motor speed 3,000 min-1, with relatively constant speed characteristics. Free lead ends. Sense of rotation can be changed by swapping leads over. Protection class IP 40. Insulation class B. Operating mode S1. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682030](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682028](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682025](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682024](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682022](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682022/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682020](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682019](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681942](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681942/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681940](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681940/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681938](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681938/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681935](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681935/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681932](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681932/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681930](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681930/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681928](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681928/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681925](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681925/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681924](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681924/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681922](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681922/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681920](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681920/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 19 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681919](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-19-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681919/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681842](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681842/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681840](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681840/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681838](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681838/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681835](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681835/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681832](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681832/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681830](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681830/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681828](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681828/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681825](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681825/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681824](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681824/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681822](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681822/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681820](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681820/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 18 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681819](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-18-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681819/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681738](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681738/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681735](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681735/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681732](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681732/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681730](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681730/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681728](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681728/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681725](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681725/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681724](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681724/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681722](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681722/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681720](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681720/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 17 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681719](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-17-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681719/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681638](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681638/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681635](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681635/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681632](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681632/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681630](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681630/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681628](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681628/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681625](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681625/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681624](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681624/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681622](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681622/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681620](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681620/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681619](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681619/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681535](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681532](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681530](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681528](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681525](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681524](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681522](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681520](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681519](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681432](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681430](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681428](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681425](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681420](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681419](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681418](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681416](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681415](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681332](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681330](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681328](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681325](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681324](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681322](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681320](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681319](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681318](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681318/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681316](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681316/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681315](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681315/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681232](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681230](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681228](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681225](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681224](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681222](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681220](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681219](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681218](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681218/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681216](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681216/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681215](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681215/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681130](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681128](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681125](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681124](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681120](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681119](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681118](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681118/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681116](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681116/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10681115](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10681115/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Bolt with pin hole size 8 x 23 x 19,5 stainless steel 1.4301; for clevis 8 x 16 and 8 x 32 SKU: 63799408](https://maedler.in/product/bolt-with-pin-hole-size-8-x-23-x-195-stainless-steel-1-4301-for-clevis-8-x-16-and-8-x-32-sku-63799408/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 6 x 18 x 15,3 stainless steel 1.4301; for clevis 6 x 12 and 6 x 24 SKU: 63799406](https://maedler.in/product/bolt-with-pin-hole-size-6-x-18-x-153-stainless-steel-1-4301-for-clevis-6-x-12-and-6-x-24-sku-63799406/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 5 x 15 x 12,3 stainless steel 1.4301; for clevis 5 x 10 and 5 x 20 SKU: 63799405](https://maedler.in/product/bolt-with-pin-hole-size-5-x-15-x-123-stainless-steel-1-4301-for-clevis-5-x-10-and-5-x-20-sku-63799405/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 4 x 12 x 10 stainless steel 1.4301; for clevis 4 x 8 and 4 x 16 SKU: 63799404](https://maedler.in/product/bolt-with-pin-hole-size-4-x-12-x-10-stainless-steel-1-4301-for-clevis-4-x-8-and-4-x-16-sku-63799404/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [SL-retainer steel zinc plated size 16 for bolt diameter 16mm SKU: 63791501](https://maedler.in/product/sl-retainer-steel-zinc-plated-size-16-for-bolt-diameter-16mm-sku-63791501/): Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm². - [SL-retainer steel zinc plated size 14 for bolt diameter 14mm SKU: 63791301](https://maedler.in/product/sl-retainer-steel-zinc-plated-size-14-for-bolt-diameter-14mm-sku-63791301/): Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm². - [SL-retainer steel zinc plated size 12 for bolt diameter 12mm SKU: 63791101](https://maedler.in/product/sl-retainer-steel-zinc-plated-size-12-for-bolt-diameter-12mm-sku-63791101/): Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm². - [SL-retainer steel zinc plated size 10 for bolt diameter 10mm SKU: 63790901](https://maedler.in/product/sl-retainer-steel-zinc-plated-size-10-for-bolt-diameter-10mm-sku-63790901/): Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm². - [SL-retainer steel zinc plated size 8 for bolt diameter 8mm SKU: 63790701](https://maedler.in/product/sl-retainer-steel-zinc-plated-size-8-for-bolt-diameter-8mm-sku-63790701/): Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm². - [SL-retainer steel zinc plated size 6 for bolt diameter 6mm SKU: 63790501](https://maedler.in/product/sl-retainer-steel-zinc-plated-size-6-for-bolt-diameter-6mm-sku-63790501/): Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm². - [SL-retainer steel zinc plated size 5 for bolt diameter 5mm SKU: 63790301](https://maedler.in/product/sl-retainer-steel-zinc-plated-size-5-for-bolt-diameter-5mm-sku-63790301/): Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm². - [SL-retainer steel zinc plated size 4 for bolt diameter 4mm SKU: 63790101](https://maedler.in/product/sl-retainer-steel-zinc-plated-size-4-for-bolt-diameter-4mm-sku-63790101/): Material: Spring steel, zinc plated.SL retainers are used to fix parts on shafts or bolts in axial direction. The large curvature results to a strong preload and eleminates tolerances for a snug fit. They are not so easy and quick to mount and to dismount like KL retainers, but the connection is much better secured against unwanted loosening.* Max. transmittable force, static, on shafts with min. strength 500 N/mm². - [KL-retainer steel zinc plated size 24 for bolt diameter 20mm and 25mm SKU: 63781701](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-24-for-bolt-diameter-20mm-and-25mm-sku-63781701/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [KL-retainer steel zinc plated size 16 for bolt diameter 16mm and 18mm SKU: 63781501](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-16-for-bolt-diameter-16mm-and-18mm-sku-63781501/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [KL-retainer steel zinc plated size 14 for bolt diameter 14mm SKU: 63781301](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-14-for-bolt-diameter-14mm-sku-63781301/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [KL-retainer steel zinc plated size 12 for bolt diameter 12mm SKU: 63781101](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-12-for-bolt-diameter-12mm-sku-63781101/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [KL-retainer steel zinc plated size 10 for bolt diameter 10mm SKU: 63780901](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-10-for-bolt-diameter-10mm-sku-63780901/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [KL-retainer steel zinc plated size 8 for bolt diameter 8mm SKU: 63780701](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-8-for-bolt-diameter-8mm-sku-63780701/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [KL-retainer steel zinc plated size 6 for bolt diameter 6mm SKU: 63780501](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-6-for-bolt-diameter-6mm-sku-63780501/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [KL-retainer steel zinc plated size 5 for bolt diameter 5mm SKU: 63780301](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-5-for-bolt-diameter-5mm-sku-63780301/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [KL-retainer steel zinc plated size 4 for bolt diameter 4mm SKU: 63780101](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-4-for-bolt-diameter-4mm-sku-63780101/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [KL-retainer steel zinc plated size 3 for bolt diameter 3mm SKU: 63780001](https://maedler.in/product/kl-retainer-steel-zinc-plated-size-3-for-bolt-diameter-3mm-sku-63780001/): Material: Spring steel, zinc plated.KL retainers are used to fix parts on shafts or bolts in axial direction. They can get mounted and dismounted very easily. They are intended for connections which must be disassembled more often. It is necessary to ensure that there is no unwanted strong contact to the retainer, because it is easily to remove.* Max. transmittable force, static, on shafts with min. strength 500 N/mm².** Depending on the shaft diamater. - [Bolt with pin hole size 50 x 115 x 103 steel zinc plated; for clevis 50 x 96 SKU: 63740050](https://maedler.in/product/bolt-with-pin-hole-size-50-x-115-x-103-steel-zinc-plated-for-clevis-50-x-96-sku-63740050/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 42 x 100 x 90 steel zinc plated; for clevis 42 x 84 SKU: 63740042](https://maedler.in/product/bolt-with-pin-hole-size-42-x-100-x-90-steel-zinc-plated-for-clevis-42-x-84-sku-63740042/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 40 x 100 x 90 steel zinc plated; for clevis 40 x 84 SKU: 63740040](https://maedler.in/product/bolt-with-pin-hole-size-40-x-100-x-90-steel-zinc-plated-for-clevis-40-x-84-sku-63740040/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 30 x 77 x 68,2 steel zinc plated; for clevis 30 x 54 SKU: 63740031](https://maedler.in/product/bolt-with-pin-hole-size-30-x-77-x-682-steel-zinc-plated-for-clevis-30-x-54-sku-63740031/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 30 x 67 x 59 steel zinc plated; for clevis 30 x 54 SKU: 63740030](https://maedler.in/product/bolt-with-pin-hole-size-30-x-67-x-59-steel-zinc-plated-for-clevis-30-x-54-sku-63740030/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 28 x 72 x 63,2 steel zinc plated; for clevis 28 x 56 SKU: 63740028](https://maedler.in/product/bolt-with-pin-hole-size-28-x-72-x-632-steel-zinc-plated-for-clevis-28-x-56-sku-63740028/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 25 x 67 x 59 steel zinc plated; for clevis 25 x 50 SKU: 63740025](https://maedler.in/product/bolt-with-pin-hole-size-25-x-67-x-59-steel-zinc-plated-for-clevis-25-x-50-sku-63740025/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 20 x 53 x 47 steel zinc plated; for clevis 20 x 40 and 20 x 80 SKU: 63740020](https://maedler.in/product/bolt-with-pin-hole-size-20-x-53-x-47-steel-zinc-plated-for-clevis-20-x-40-and-20-x-80-sku-63740020/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 18 x 50 x 43,5 steel zinc plated; for clevis 18 x 36 SKU: 63740018](https://maedler.in/product/bolt-with-pin-hole-size-18-x-50-x-435-steel-zinc-plated-for-clevis-18-x-36-sku-63740018/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 16 x 45 x 38,2 steel zinc plated; for clevis 16 x 32 and 16 x 64 SKU: 63740016](https://maedler.in/product/bolt-with-pin-hole-size-16-x-45-x-382-steel-zinc-plated-for-clevis-16-x-32-and-16-x-64-sku-63740016/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 14 x 40 x 32,5 steel zinc plated; for clevis 14 x 28 and 14 x 56 SKU: 63740014](https://maedler.in/product/bolt-with-pin-hole-size-14-x-40-x-325-steel-zinc-plated-for-clevis-14-x-28-and-14-x-56-sku-63740014/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 12 x 35 x 29,5 steel zinc plated; for clevis 12 x 24 and 12 x 48 SKU: 63740012](https://maedler.in/product/bolt-with-pin-hole-size-12-x-35-x-295-steel-zinc-plated-for-clevis-12-x-24-and-12-x-48-sku-63740012/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 10 x 29 x 24,5 steel zinc plated; for clevis 10 x 20 and 10 x 40 SKU: 63740010](https://maedler.in/product/bolt-with-pin-hole-size-10-x-29-x-245-steel-zinc-plated-for-clevis-10-x-20-and-10-x-40-sku-63740010/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 8 x 23 x 19,5 steel zinc plated; for clevis 8 x 16 and 8 x 32 SKU: 63740008](https://maedler.in/product/bolt-with-pin-hole-size-8-x-23-x-195-steel-zinc-plated-for-clevis-8-x-16-and-8-x-32-sku-63740008/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 6 x 18 x 15,3 steel zinc plated; for clevis 6 x 12 and 6 x 24 SKU: 63740006](https://maedler.in/product/bolt-with-pin-hole-size-6-x-18-x-153-steel-zinc-plated-for-clevis-6-x-12-and-6-x-24-sku-63740006/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 5 x 15 x 12,3 steel zinc plated; for clevis 5 x 10 and 5 x 20 SKU: 63740005](https://maedler.in/product/bolt-with-pin-hole-size-5-x-15-x-123-steel-zinc-plated-for-clevis-5-x-10-and-5-x-20-sku-63740005/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 4 x 12 x 10 steel zinc plated; for clevis 4 x 8 and 4 x 16 SKU: 63740004](https://maedler.in/product/bolt-with-pin-hole-size-4-x-12-x-10-steel-zinc-plated-for-clevis-4-x-8-and-4-x-16-sku-63740004/): Material: Steel 1.0044 (AISI 1020) zinc-plated.Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bellow FSG size 70X96 colour: black SKU: 63057000](https://maedler.in/product/bellow-fsg-size-70x96-colour-black-sku-63057000/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 58X95 colour: black SKU: 63055500](https://maedler.in/product/bellow-fsg-size-58x95-colour-black-sku-63055500/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 52X95 colour: black SKU: 63055000](https://maedler.in/product/bellow-fsg-size-52x95-colour-black-sku-63055000/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 47X90 colour: black SKU: 63054500](https://maedler.in/product/bellow-fsg-size-47x90-colour-black-sku-63054500/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 42X75 colour: black SKU: 63054000](https://maedler.in/product/bellow-fsg-size-42x75-colour-black-sku-63054000/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 36X82 colour: black SKU: 63053600](https://maedler.in/product/bellow-fsg-size-36x82-colour-black-sku-63053600/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 32X75 colour: black SKU: 63053300](https://maedler.in/product/bellow-fsg-size-32x75-colour-black-sku-63053300/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 32X60 colour: black SKU: 63053200](https://maedler.in/product/bellow-fsg-size-32x60-colour-black-sku-63053200/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 29X50 colour: black SKU: 63052900](https://maedler.in/product/bellow-fsg-size-29x50-colour-black-sku-63052900/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 28X58 colour: black SKU: 63052800](https://maedler.in/product/bellow-fsg-size-28x58-colour-black-sku-63052800/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 26X45 colour: black SKU: 63052600](https://maedler.in/product/bellow-fsg-size-26x45-colour-black-sku-63052600/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 25X66 colour: black SKU: 63052500](https://maedler.in/product/bellow-fsg-size-25x66-colour-black-sku-63052500/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 22X40 colour: black SKU: 63052200](https://maedler.in/product/bellow-fsg-size-22x40-colour-black-sku-63052200/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 20X56 colour: black SKU: 63052000](https://maedler.in/product/bellow-fsg-size-20x56-colour-black-sku-63052000/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 18X38 colour: black SKU: 63051800](https://maedler.in/product/bellow-fsg-size-18x38-colour-black-sku-63051800/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Bellow FSG size 16X32 colour: black SKU: 63051600](https://maedler.in/product/bellow-fsg-size-16x32-colour-black-sku-63051600/): Material: mineral-oil resistant material based on nitrile rubber, with a hardness of about 45 Shore A. Single-fold bellows are used to protect ball and universal joints. The shaft lengths L1 and L2 are estimated dimensions. To securely fix the bellows on the joints, the connections should also be supplied with hose fittings. - [Shim ring DIN 988 50 x 62 x 2 material steel DC01 C590 SKU: 624350629](https://maedler.in/product/shim-ring-din-988-50-x-62-x-2-material-steel-dc01-c590-sku-624350629/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 50 x 62 x 1,5 material steel DC01 C590 SKU: 624350628](https://maedler.in/product/shim-ring-din-988-50-x-62-x-15-material-steel-dc01-c590-sku-624350628/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 50 x 62 x 1,2 material steel DC01 C590 SKU: 624350627](https://maedler.in/product/shim-ring-din-988-50-x-62-x-12-material-steel-dc01-c590-sku-624350627/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 50 x 62 x 1 material steel DC01 C590 SKU: 624350626](https://maedler.in/product/shim-ring-din-988-50-x-62-x-1-material-steel-dc01-c590-sku-624350626/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 50 x 62 x 0,5 material steel DC01 C590 SKU: 624350625](https://maedler.in/product/shim-ring-din-988-50-x-62-x-05-material-steel-dc01-c590-sku-624350625/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 50 x 62 x 0,3 material steel DC01 C590 SKU: 624350624](https://maedler.in/product/shim-ring-din-988-50-x-62-x-03-material-steel-dc01-c590-sku-624350624/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 50 x 62 x 0,25 material steel DC01 C590 SKU: 624350623](https://maedler.in/product/shim-ring-din-988-50-x-62-x-025-material-steel-dc01-c590-sku-624350623/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 50 x 62 x 0,2 material steel DC01 C590 SKU: 624350622](https://maedler.in/product/shim-ring-din-988-50-x-62-x-02-material-steel-dc01-c590-sku-624350622/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 50 x 62 x 0,15 material steel DC01 C590 SKU: 624350621](https://maedler.in/product/shim-ring-din-988-50-x-62-x-015-material-steel-dc01-c590-sku-624350621/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 50 x 62 x 0,1 material steel DC01 C590 SKU: 624350620](https://maedler.in/product/shim-ring-din-988-50-x-62-x-01-material-steel-dc01-c590-sku-624350620/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 2 material steel DC01 C590 SKU: 624348609](https://maedler.in/product/shim-ring-din-988-48-x-60-x-2-material-steel-dc01-c590-sku-624348609/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 1,5 material steel DC01 C590 SKU: 624348608](https://maedler.in/product/shim-ring-din-988-48-x-60-x-15-material-steel-dc01-c590-sku-624348608/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 1,2 material steel DC01 C590 SKU: 624348607](https://maedler.in/product/shim-ring-din-988-48-x-60-x-12-material-steel-dc01-c590-sku-624348607/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 1 material steel DC01 C590 SKU: 624348606](https://maedler.in/product/shim-ring-din-988-48-x-60-x-1-material-steel-dc01-c590-sku-624348606/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 0,5 material steel DC01 C590 SKU: 624348605](https://maedler.in/product/shim-ring-din-988-48-x-60-x-05-material-steel-dc01-c590-sku-624348605/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 0,3 material steel DC01 C590 SKU: 624348604](https://maedler.in/product/shim-ring-din-988-48-x-60-x-03-material-steel-dc01-c590-sku-624348604/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 0,25 material steel DC01 C590 SKU: 624348603](https://maedler.in/product/shim-ring-din-988-48-x-60-x-025-material-steel-dc01-c590-sku-624348603/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 0,2 material steel DC01 C590 SKU: 624348602](https://maedler.in/product/shim-ring-din-988-48-x-60-x-02-material-steel-dc01-c590-sku-624348602/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 0,15 material steel DC01 C590 SKU: 624348601](https://maedler.in/product/shim-ring-din-988-48-x-60-x-015-material-steel-dc01-c590-sku-624348601/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 48 x 60 x 0,1 material steel DC01 C590 SKU: 624348600](https://maedler.in/product/shim-ring-din-988-48-x-60-x-01-material-steel-dc01-c590-sku-624348600/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 2 material steel DC01 C590 SKU: 624345559](https://maedler.in/product/shim-ring-din-988-45-x-55-x-2-material-steel-dc01-c590-sku-624345559/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 1,5 material steel DC01 C590 SKU: 624345558](https://maedler.in/product/shim-ring-din-988-45-x-55-x-15-material-steel-dc01-c590-sku-624345558/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 1,2 material steel DC01 C590 SKU: 624345557](https://maedler.in/product/shim-ring-din-988-45-x-55-x-12-material-steel-dc01-c590-sku-624345557/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 1 material steel DC01 C590 SKU: 624345556](https://maedler.in/product/shim-ring-din-988-45-x-55-x-1-material-steel-dc01-c590-sku-624345556/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 0,5 material steel DC01 C590 SKU: 624345555](https://maedler.in/product/shim-ring-din-988-45-x-55-x-05-material-steel-dc01-c590-sku-624345555/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 0,3 material steel DC01 C590 SKU: 624345554](https://maedler.in/product/shim-ring-din-988-45-x-55-x-03-material-steel-dc01-c590-sku-624345554/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 0,25 material steel DC01 C590 SKU: 624345553](https://maedler.in/product/shim-ring-din-988-45-x-55-x-025-material-steel-dc01-c590-sku-624345553/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 0,2 material steel DC01 C590 SKU: 624345552](https://maedler.in/product/shim-ring-din-988-45-x-55-x-02-material-steel-dc01-c590-sku-624345552/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 0,15 material steel DC01 C590 SKU: 624345551](https://maedler.in/product/shim-ring-din-988-45-x-55-x-015-material-steel-dc01-c590-sku-624345551/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 45 x 55 x 0,1 material steel DC01 C590 SKU: 624345550](https://maedler.in/product/shim-ring-din-988-45-x-55-x-01-material-steel-dc01-c590-sku-624345550/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 2 material steel DC01 C590 SKU: 624342529](https://maedler.in/product/shim-ring-din-988-42-x-52-x-2-material-steel-dc01-c590-sku-624342529/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 1,5 material steel DC01 C590 SKU: 624342528](https://maedler.in/product/shim-ring-din-988-42-x-52-x-15-material-steel-dc01-c590-sku-624342528/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 1,2 material steel DC01 C590 SKU: 624342527](https://maedler.in/product/shim-ring-din-988-42-x-52-x-12-material-steel-dc01-c590-sku-624342527/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 1 material steel DC01 C590 SKU: 624342526](https://maedler.in/product/shim-ring-din-988-42-x-52-x-1-material-steel-dc01-c590-sku-624342526/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 0,5 material steel DC01 C590 SKU: 624342525](https://maedler.in/product/shim-ring-din-988-42-x-52-x-05-material-steel-dc01-c590-sku-624342525/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 0,3 material steel DC01 C590 SKU: 624342524](https://maedler.in/product/shim-ring-din-988-42-x-52-x-03-material-steel-dc01-c590-sku-624342524/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 0,25 material steel DC01 C590 SKU: 624342523](https://maedler.in/product/shim-ring-din-988-42-x-52-x-025-material-steel-dc01-c590-sku-624342523/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 0,2 material steel DC01 C590 SKU: 624342522](https://maedler.in/product/shim-ring-din-988-42-x-52-x-02-material-steel-dc01-c590-sku-624342522/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 0,15 material steel DC01 C590 SKU: 624342521](https://maedler.in/product/shim-ring-din-988-42-x-52-x-015-material-steel-dc01-c590-sku-624342521/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 42 x 52 x 0,1 material steel DC01 C590 SKU: 624342520](https://maedler.in/product/shim-ring-din-988-42-x-52-x-01-material-steel-dc01-c590-sku-624342520/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 40 x 50 x 2 material steel DC01 C590 SKU: 624340509](https://maedler.in/product/shim-ring-din-988-40-x-50-x-2-material-steel-dc01-c590-sku-624340509/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 40 x 50 x 1,5 material steel DC01 C590 SKU: 624340508](https://maedler.in/product/shim-ring-din-988-40-x-50-x-15-material-steel-dc01-c590-sku-624340508/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 40 x 50 x 1,2 material steel DC01 C590 SKU: 624340507](https://maedler.in/product/shim-ring-din-988-40-x-50-x-12-material-steel-dc01-c590-sku-624340507/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 40 x 50 x 1 material steel DC01 C590 SKU: 624340506](https://maedler.in/product/shim-ring-din-988-40-x-50-x-1-material-steel-dc01-c590-sku-624340506/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Shim ring DIN 988 40 x 50 x 0,5 material steel DC01 C590 SKU: 624340505](https://maedler.in/product/shim-ring-din-988-40-x-50-x-05-material-steel-dc01-c590-sku-624340505/): Material: Steel.Precisely manufactured adjusting rings (distance washers) in various diameters and thicknesses. For adjusting the axial clearance at axles, shafts, bushes, bearings, levers and joints.Several rings may be placed on each other to get the needed thickness. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=11:1 output speed approx. 247 rpm Md2=6.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306011](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i111-output-speed-approx-247-rpm-md26-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 400 rpm Md2=4.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306007](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i71-output-speed-approx-400-rpm-md24-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=5:1 output speed approx. 560 rpm Md2=3.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306005](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i51-output-speed-approx-560-rpm-md23-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=75:1 output speed approx. 19 rpm permitted Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305075](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i751-output-speed-approx-19-rpm-permitted-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=56:1 output speed approx. 25 rpm permitted Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305056](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i561-output-speed-approx-25-rpm-permitted-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=38:1 output speed approx. 37 rpm permitted Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305038](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i381-output-speed-approx-37-rpm-permitted-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=32:1 output speed approx. 44 rpm permitted Md2=16Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305032](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i321-output-speed-approx-44-rpm-permitted-md216nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm permitted Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305030](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-permitted-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=24:1 output speed approx. 58 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305024](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i241-output-speed-approx-58-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305020](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=17:1 output speed approx. 82 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305017](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i171-output-speed-approx-82-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305015](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=11:1 output speed approx. 124 rpm Md2=9.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305011](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i111-output-speed-approx-124-rpm-md29-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 200 rpm Md2=6.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305007](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i71-output-speed-approx-200-rpm-md26-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 180 Watt 230/400V 50Hz IE2 i=5:1 output speed approx. 280 rpm Md2=4.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43305005](https://maedler.in/product/worm-geared-motor-meg-180-watt-230-400v-50hz-ie2-i51-output-speed-approx-280-rpm-md24-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=8.9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302100](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md28-9nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=75:1 output speed approx. 19 rpm permitted Md2=8.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302075](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i751-output-speed-approx-19-rpm-permitted-md28-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=55:1 output speed approx. 25 rpm permitted Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302055](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i551-output-speed-approx-25-rpm-permitted-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302050](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=38:1 output speed approx. 37 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302038](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i381-output-speed-approx-37-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=30:1 output speed approx. 47 rpm Md2=9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302030](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i301-output-speed-approx-47-rpm-md29nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=24:1 output speed approx. 58 rpm Md2=7.2Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302024](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i241-output-speed-approx-58-rpm-md27-2nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=20:1 output speed approx. 70 rpm Md2=7.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302020](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i201-output-speed-approx-70-rpm-md27-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=15:1 output speed approx. 93 rpm Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302015](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i151-output-speed-approx-93-rpm-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=10:1 output speed approx. 140 rpm Md2=4.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302010](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i101-output-speed-approx-140-rpm-md24-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=7:1 output speed approx. 200 rpm Md2=3.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302007](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i71-output-speed-approx-200-rpm-md23-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 90 Watt 230/400V 50Hz IE1 i=5:1 output speed approx. 280 rpm Md2=2.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43302005](https://maedler.in/product/worm-geared-motor-mek-90-watt-230-400v-50hz-ie1-i51-output-speed-approx-280-rpm-md22-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=8.9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301100](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md28-9nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=75:1 output speed approx. 19 rpm Md2=6.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301075](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i751-output-speed-approx-19-rpm-md26-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=55:1 output speed approx. 25 rpm Md2=7.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301055](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i551-output-speed-approx-25-rpm-md27-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm Md2=5.7Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301050](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-md25-7nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=38:1 output speed approx. 37 rpm Md2=5.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301038](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i381-output-speed-approx-37-rpm-md25-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=30:1 output speed approx. 47 rpm Md2=4.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301030](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i301-output-speed-approx-47-rpm-md24-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=24:1 output speed approx. 58 rpm Md2=3.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301024](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i241-output-speed-approx-58-rpm-md23-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=20:1 output speed approx. 70 rpm Md2=3.7Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301020](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i201-output-speed-approx-70-rpm-md23-7nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=15:1 output speed approx. 93 rpm Md2=3.0Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301015](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i151-output-speed-approx-93-rpm-md23-0nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=10:1 output speed approx. 140 rpm Md2=2.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301010](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i101-output-speed-approx-140-rpm-md22-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=7:1 output speed approx. 200 rpm Md2=1.7Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301007](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i71-output-speed-approx-200-rpm-md21-7nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEK 45 Watt 230/400V 50Hz IE1 i=5:1 output speed approx. 280 rpm Md2=1.2Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43301005](https://maedler.in/product/worm-geared-motor-mek-45-watt-230-400v-50hz-ie1-i51-output-speed-approx-280-rpm-md21-2nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE1. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =416 rpm Md2 =33 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215085](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-416-rpm-md2-33-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321508/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =334 rpm Md2 =41 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215080](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-334-rpm-md2-41-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321508/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =262 rpm Md2 =53 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215075](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-262-rpm-md2-53-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321507/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =225 rpm Md2 =62 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215070](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-225-rpm-md2-62-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321507/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =195 rpm Md2 =71 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215065](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-195-rpm-md2-71-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321506/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =181 rpm Md2 =76 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215060](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-181-rpm-md2-76-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321506/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =142 rpm Md2 =97 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215055](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-142-rpm-md2-97-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321505/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =123 rpm Md2 =113 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215050](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-123-rpm-md2-113-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432150/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =101 rpm Md2 =138 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215045](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-101-rpm-md2-138-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432150/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =86 rpm Md2 =161 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215040](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-86-rpm-md2-161-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321504/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =71 rpm Md2 =195 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215035](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-71-rpm-md2-195-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321503/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =57 rpm Md2 =242 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215030](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-57-rpm-md2-242-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321503/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =48.6 rpm Md2 =285 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215025](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-48-6-rpm-md2-285-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =40.2 rpm Md2 =345 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215020](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-40-2-rpm-md2-345-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =35.9 rpm Md2 =377 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215015](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-35-9-rpm-md2-377-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =30.3 rpm Md2 =448 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215010](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-30-3-rpm-md2-448-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.5kW 230/400V 50Hz model B3 IE3 n2 =26.1 rpm Md2 =519 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43215005](https://maedler.in/product/helical-geared-motor-hr-i-1-5kw-230-400v-50hz-model-b3-ie3-n2-26-1-rpm-md2-519-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43215/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =419 rpm Md2 =24 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211085](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-419-rpm-md2-24-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321108/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =336 rpm Md2 =30 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211080](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-336-rpm-md2-30-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321108/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =264 rpm Md2 =38 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211075](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-264-rpm-md2-38-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321107/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =231 rpm Md2 =44 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211070](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-231-rpm-md2-44-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321107/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =200 rpm Md2 =51 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211067](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-200-rpm-md2-51-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =186 rpm Md2 =55 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211065](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-186-rpm-md2-55-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321106/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =143 rpm Md2 =71 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211062](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-143-rpm-md2-71-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321106/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =123 rpm Md2 =82 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211060](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-123-rpm-md2-82-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321106/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =109 rpm Md2 =93 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211057](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-109-rpm-md2-93-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =94 rpm Md2 =108 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211055](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-94-rpm-md2-108-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321105/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =80 rpm Md2 =127 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211050](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-80-rpm-md2-127-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321105/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =67 rpm Md2 =152 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211045](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-67-rpm-md2-152-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321104/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =58 rpm Md2 =176 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211040](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-58-rpm-md2-176-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4321104/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =49.0 rpm Md2 =207 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211035](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-49-0-rpm-md2-207-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =40.5 rpm Md2 =251 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211030](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-40-5-rpm-md2-251-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =36.2 rpm Md2 =275 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211025](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-36-2-rpm-md2-275-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =30.5 rpm Md2 =326 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211020](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-30-5-rpm-md2-326-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =26.3 rpm Md2 =378 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211015](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-26-3-rpm-md2-378-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =21.9 rpm Md2 =457 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211010](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-21-9-rpm-md2-457-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 1.1kW 230/400V 50Hz model B3 IE3 n2 =18.8 rpm Md2 =529 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43211005](https://maedler.in/product/helical-geared-motor-hr-i-1-1kw-230-400v-50hz-model-b3-ie3-n2-18-8-rpm-md2-529-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43211/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =419 rpm Md2 =17 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207580](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-419-rpm-md2-17-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =336 rpm Md2 =21 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207575](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-336-rpm-md2-21-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =264 rpm Md2 =26 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207570](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-264-rpm-md2-26-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =231 rpm Md2 =30 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207565](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-231-rpm-md2-30-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =200 rpm Md2 =35 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207560](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-200-rpm-md2-35-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =174 rpm Md2 =40 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207557](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-174-rpm-md2-40-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =143 rpm Md2 =49 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207555](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-143-rpm-md2-49-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =123 rpm Md2 =56 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207552](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-123-rpm-md2-56-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =109 rpm Md2 =64 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207550](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-109-rpm-md2-64-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =89 rpm Md2 =78 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207547](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-89-rpm-md2-78-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320754/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =77 rpm Md2 =91 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207545](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-77-rpm-md2-91-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320754/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =65 rpm Md2 =108 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207542](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-65-rpm-md2-108-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =58 rpm Md2 =121 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207540](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-58-rpm-md2-121-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-432075/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =49.0 rpm Md2 =142 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207537](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-49-0-rpm-md2-142-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =40.5 rpm Md2 =172 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207535](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-40-5-rpm-md2-172-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =35.6 rpm Md2 =196 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207532](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-35-6-rpm-md2-196-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =30.5 rpm Md2 =224 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207530](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-30-5-rpm-md2-224-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =26.3 rpm Md2 =259 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207525](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-26-3-rpm-md2-259-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =21.7 rpm Md2 =314 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207520](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-21-7-rpm-md2-314-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =17.2 rpm Md2 =396 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207515](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-17-2-rpm-md2-396-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =13.8 rpm Md2 =496 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207510](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-13-8-rpm-md2-496-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.75kW 230/400V 50Hz model B3 IE3 n2 =11.4 rpm Md2 =600 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43207505](https://maedler.in/product/helical-geared-motor-hr-i-0-75kw-230-400v-50hz-model-b3-ie3-n2-11-4-rpm-md2-600-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4320/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =257 rpm Md2 =20 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205596](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-257-rpm-md2-20-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Helical geared motor HR/I 0.55kW 230/400V 50Hz model B3 IE2 n2 =181 rpm Md2 =28 Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43205595](https://maedler.in/product/helical-geared-motor-hr-i-0-55kw-230-400v-50hz-model-b3-ie2-n2-181-rpm-md2-28-nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-43205/): Housing: Aluminium, corrosion-inhibiting coating, with mounting holes for foot and flange mounting and with removable twist cap for easy service. Gearing: Hardened and ground. Lubrication: Synthetic oil (lubricated for life). Motor: Standard three-phase motor with small flange B14, 230/400V, 50 Hz. Other Motor versions (AC Motor, posistor, forced ventilation, break etc.) on request. Efficiency class: 0.09 kW: IE1. From 0.12 to 0.55 kW: IE2. From 0.75 kW: IE3. Light-weight, high-quality model range with many mounting options. These maintenance free, geared motors without ventilation can be used in any mounting position. Variable mounting: These geared motors are supplied with a screwed-on foot mounting. If flange mounting is required or if the motor is to be mounted on an existing base plate, this foot can simply be unscrewed. Retrofittable flange: If the motor is to be flange mounted on the output side, a flange can be srewed on by the customer. These flanges B5 are available in several diameters and have to be ordered separately. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699124](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699123](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699122](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699121](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699120](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699119](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699118](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699117](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699116](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699115](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699114](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699113](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699112](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 30 teeth material steel teeth induction hardened SKU: 10688130](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-30-teeth-material-steel-teeth-induction-hardened-sku-10688130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 28 teeth material steel teeth induction hardened SKU: 10688128](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-28-teeth-material-steel-teeth-induction-hardened-sku-10688128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 27 teeth material steel teeth induction hardened SKU: 10688127](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-27-teeth-material-steel-teeth-induction-hardened-sku-10688127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 26 teeth material steel teeth induction hardened SKU: 10688126](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-26-teeth-material-steel-teeth-induction-hardened-sku-10688126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 25 teeth material steel teeth induction hardened SKU: 10688125](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-25-teeth-material-steel-teeth-induction-hardened-sku-10688125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 24 teeth material steel teeth induction hardened SKU: 10688124](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-24-teeth-material-steel-teeth-induction-hardened-sku-10688124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 23 teeth material steel teeth induction hardened SKU: 10688123](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-23-teeth-material-steel-teeth-induction-hardened-sku-10688123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 22 teeth material steel teeth induction hardened SKU: 10688122](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-22-teeth-material-steel-teeth-induction-hardened-sku-10688122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 21 teeth material steel teeth induction hardened SKU: 10688121](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-21-teeth-material-steel-teeth-induction-hardened-sku-10688121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 20 teeth material steel teeth induction hardened SKU: 10688120](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-20-teeth-material-steel-teeth-induction-hardened-sku-10688120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 19 teeth material steel teeth induction hardened SKU: 10688119](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-19-teeth-material-steel-teeth-induction-hardened-sku-10688119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 18 teeth material steel teeth induction hardened SKU: 10688118](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-18-teeth-material-steel-teeth-induction-hardened-sku-10688118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 17 teeth material steel teeth induction hardened SKU: 10688117](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-17-teeth-material-steel-teeth-induction-hardened-sku-10688117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 16 teeth material steel teeth induction hardened SKU: 10688116](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-16-teeth-material-steel-teeth-induction-hardened-sku-10688116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 15 teeth material steel teeth induction hardened SKU: 10688115](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-15-teeth-material-steel-teeth-induction-hardened-sku-10688115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 14 teeth material steel teeth induction hardened SKU: 10688114](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-14-teeth-material-steel-teeth-induction-hardened-sku-10688114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 13 teeth material steel teeth induction hardened SKU: 10688113](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-13-teeth-material-steel-teeth-induction-hardened-sku-10688113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 12 teeth material steel teeth induction hardened SKU: 10688112](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-12-teeth-material-steel-teeth-induction-hardened-sku-10688112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 11 teeth material steel teeth induction hardened SKU: 10688111](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-11-teeth-material-steel-teeth-induction-hardened-sku-10688111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 10 teeth material steel teeth induction hardened SKU: 10688110](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-10-teeth-material-steel-teeth-induction-hardened-sku-10688110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 9 teeth material steel teeth induction hardened SKU: 10688109](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-9-teeth-material-steel-teeth-induction-hardened-sku-10688109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRG with hub 10 B-1 5/8x3/8" 8 teeth material steel teeth induction hardened SKU: 10688108](https://maedler.in/product/sprocket-krg-with-hub-10-b-1-5-8x3-8-8-teeth-material-steel-teeth-induction-hardened-sku-10688108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682542](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682542/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682540](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682540/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682538](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682538/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682535](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682532](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682530](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682528](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682525](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682524](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682522](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682520](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 25 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682519](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-25-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682442](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682442/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682440](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682440/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682438](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682438/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682435](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682435/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682432](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682430](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682428](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682425](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682424](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682424/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682422](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682422/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682420](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 24 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682419](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-24-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682342](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682342/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682340](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682340/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682338](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682338/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682335](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682335/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682332](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682330](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682328](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682325](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682324](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682322](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682320](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 23 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682319](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-23-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682242](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682242/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682240](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682240/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682238](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682238/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682235](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682235/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682232](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682230](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682228](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682225](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682224](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682222](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682220](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 22 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682219](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-22-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682142](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682142/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682140](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682140/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682138](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682138/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682135](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682135/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682132](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682132/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682130](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682128](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682125](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682124](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682122](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682122/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682120](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 21 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682119](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-21-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682042](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682042/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682040](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682040/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682038](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682038/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682035](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682035/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRF with hub 10 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10682032](https://maedler.in/product/sprocket-krf-with-hub-10-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10682032/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Splined hub with flange DIN 14 KN 26X32 length 60mm steel C45Pb SKU: 64850700](https://maedler.in/product/splined-hub-with-flange-din-14-kn-26x32-length-60mm-steel-c45pb-sku-64850700/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 21X25 length 50mm steel C45Pb SKU: 64850600](https://maedler.in/product/splined-hub-with-flange-din-14-kn-21x25-length-50mm-steel-c45pb-sku-64850600/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 16X20 length 40mm steel C45Pb SKU: 64850500](https://maedler.in/product/splined-hub-with-flange-din-14-kn-16x20-length-40mm-steel-c45pb-sku-64850500/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 13X16 length 40mm steel C45Pb SKU: 64850400](https://maedler.in/product/splined-hub-with-flange-din-14-kn-13x16-length-40mm-steel-c45pb-sku-64850400/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 23X28 length 55mm steel C45Pb SKU: 64850300](https://maedler.in/product/splined-hub-with-flange-din-14-kn-23x28-length-55mm-steel-c45pb-sku-64850300/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 11X14 length 35mm steel C45Pb SKU: 64850200](https://maedler.in/product/splined-hub-with-flange-din-14-kn-11x14-length-35mm-steel-c45pb-sku-64850200/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 18X22 length 45mm steel C45Pb SKU: 64850100](https://maedler.in/product/splined-hub-with-flange-din-14-kn-18x22-length-45mm-steel-c45pb-sku-64850100/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub DIN 14 KN 46X54 length 90mm diameter 80mm red brass Rg7 SKU: 64836400](https://maedler.in/product/splined-hub-din-14-kn-46x54-length-90mm-diameter-80mm-red-brass-rg7-sku-64836400/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 36X42 length 65mm diameter 70mm red brass Rg7 SKU: 64836200](https://maedler.in/product/splined-hub-din-14-kn-36x42-length-65mm-diameter-70mm-red-brass-rg7-sku-64836200/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 42X48 length 70mm diameter 80mm red brass Rg7 SKU: 64836100](https://maedler.in/product/splined-hub-din-14-kn-42x48-length-70mm-diameter-80mm-red-brass-rg7-sku-64836100/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 42X48 length 70mm diameter 65mm red brass Rg7 SKU: 64836000](https://maedler.in/product/splined-hub-din-14-kn-42x48-length-70mm-diameter-65mm-red-brass-rg7-sku-64836000/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 28X34 length 60mm diameter 60mm red brass Rg7 SKU: 64835900](https://maedler.in/product/splined-hub-din-14-kn-28x34-length-60mm-diameter-60mm-red-brass-rg7-sku-64835900/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 32X38 length 60mm diameter 60mm red brass Rg7 SKU: 64835800](https://maedler.in/product/splined-hub-din-14-kn-32x38-length-60mm-diameter-60mm-red-brass-rg7-sku-64835800/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 26X32 length 60mm diameter 52mm red brass Rg7 SKU: 64835700](https://maedler.in/product/splined-hub-din-14-kn-26x32-length-60mm-diameter-52mm-red-brass-rg7-sku-64835700/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 21X25 length 55mm diameter 40mm red brass Rg7 SKU: 64835600](https://maedler.in/product/splined-hub-din-14-kn-21x25-length-55mm-diameter-40mm-red-brass-rg7-sku-64835600/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 16X20 length 45mm diameter 32mm red brass Rg7 SKU: 64835500](https://maedler.in/product/splined-hub-din-14-kn-16x20-length-45mm-diameter-32mm-red-brass-rg7-sku-64835500/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 13X16 length 45mm diameter 28mm red brass Rg7 SKU: 64835400](https://maedler.in/product/splined-hub-din-14-kn-13x16-length-45mm-diameter-28mm-red-brass-rg7-sku-64835400/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 23X28 length 55mm diameter 50mm red brass Rg7 SKU: 64835300](https://maedler.in/product/splined-hub-din-14-kn-23x28-length-55mm-diameter-50mm-red-brass-rg7-sku-64835300/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 11X14 length 40mm diameter 20mm red brass Rg7 SKU: 64835200](https://maedler.in/product/splined-hub-din-14-kn-11x14-length-40mm-diameter-20mm-red-brass-rg7-sku-64835200/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 18X22 length 50mm diameter 40mm red brass Rg7 SKU: 64835100](https://maedler.in/product/splined-hub-din-14-kn-18x22-length-50mm-diameter-40mm-red-brass-rg7-sku-64835100/): Material: Red Brass (CuSn7Zn4Pb7-C).A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 46X54 length 90mm diameter 80mm steel C45 SKU: 64831400](https://maedler.in/product/splined-hub-din-14-kn-46x54-length-90mm-diameter-80mm-steel-c45-sku-64831400/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 36X42 length 65mm diameter 70mm steel C45Pb SKU: 64831200](https://maedler.in/product/splined-hub-din-14-kn-36x42-length-65mm-diameter-70mm-steel-c45pb-sku-64831200/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 42X48 length 70mm diameter 80mm steel C45Pb SKU: 64831100](https://maedler.in/product/splined-hub-din-14-kn-42x48-length-70mm-diameter-80mm-steel-c45pb-sku-64831100/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 42X48 length 70mm diameter 65mm steel C45Pb SKU: 64831000](https://maedler.in/product/splined-hub-din-14-kn-42x48-length-70mm-diameter-65mm-steel-c45pb-sku-64831000/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 28X34 length 60mm diameter 60mm steel C45Pb SKU: 64830900](https://maedler.in/product/splined-hub-din-14-kn-28x34-length-60mm-diameter-60mm-steel-c45pb-sku-64830900/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 32X38 length 60mm diameter 60mm steel C45Pb SKU: 64830800](https://maedler.in/product/splined-hub-din-14-kn-32x38-length-60mm-diameter-60mm-steel-c45pb-sku-64830800/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 26X32 length 60mm diameter 52mm steel C45Pb SKU: 64830700](https://maedler.in/product/splined-hub-din-14-kn-26x32-length-60mm-diameter-52mm-steel-c45pb-sku-64830700/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 21X25 length 55mm diameter 40mm steel C45Pb SKU: 64830600](https://maedler.in/product/splined-hub-din-14-kn-21x25-length-55mm-diameter-40mm-steel-c45pb-sku-64830600/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 16X20 length 45mm diameter 32mm steel C45Pb SKU: 64830500](https://maedler.in/product/splined-hub-din-14-kn-16x20-length-45mm-diameter-32mm-steel-c45pb-sku-64830500/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 13X16 length 45mm diameter 28mm steel C45Pb SKU: 64830400](https://maedler.in/product/splined-hub-din-14-kn-13x16-length-45mm-diameter-28mm-steel-c45pb-sku-64830400/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 23X28 length 55mm diameter 50mm steel C45Pb SKU: 64830300](https://maedler.in/product/splined-hub-din-14-kn-23x28-length-55mm-diameter-50mm-steel-c45pb-sku-64830300/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 11X14 length 40mm diameter 20mm steel C45Pb SKU: 64830200](https://maedler.in/product/splined-hub-din-14-kn-11x14-length-40mm-diameter-20mm-steel-c45pb-sku-64830200/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 18X22 length 50mm diameter 40mm steel C45Pb SKU: 64830100](https://maedler.in/product/splined-hub-din-14-kn-18x22-length-50mm-diameter-40mm-steel-c45pb-sku-64830100/): Material: Steel C45Pb, from diametre 80 C45. A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Linear slide bearing PO-1 ISO series 1 premium for shaft diameter 50 mm outside diameter 62 mm length 70 mm SKU: 64625050P](https://maedler.in/product/linear-slide-bearing-po-1-iso-series-1-premium-for-shaft-diameter-50-mm-outside-diameter-62-mm-length-70-mm-sku-64625050p/): Material: self-lubricationg sliding material is polyacetal with a specific polyethylene.The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used.These self-holding linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 1 and can be fitted in the same housings. Tolerances: Mounting hole H6, shaft h6. Temperature range: -40ºC to +80ºC.* Nominal size for the mounting hole. The bearing is made with oversize for press fit, 0.1 to 0.3 mm, depending on the size. - [Open Linear slide bearing PO-3-O ISO series 3 premium for shaft diameter 50mm SKU: 64625001](https://maedler.in/product/open-linear-slide-bearing-po-3-o-iso-series-3-premium-for-shaft-diameter-50mm-sku-64625001/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-3 ISO series 3 premium for shaft diameter 50mm SKU: 64625000](https://maedler.in/product/linear-slide-bearing-po-3-iso-series-3-premium-for-shaft-diameter-50mm-sku-64625000/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-1 ISO series 1 premium for shaft diameter 40 mm outside diameter 52 mm length 60 mm SKU: 64624040P](https://maedler.in/product/linear-slide-bearing-po-1-iso-series-1-premium-for-shaft-diameter-40-mm-outside-diameter-52-mm-length-60-mm-sku-64624040p/): Material: self-lubricationg sliding material is polyacetal with a specific polyethylene.The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used.These self-holding linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 1 and can be fitted in the same housings. Tolerances: Mounting hole H6, shaft h6. Temperature range: -40ºC to +80ºC.* Nominal size for the mounting hole. The bearing is made with oversize for press fit, 0.1 to 0.3 mm, depending on the size. - [Open Linear slide bearing PO-3-O ISO series 3 premium for shaft diameter 40mm SKU: 64624001](https://maedler.in/product/open-linear-slide-bearing-po-3-o-iso-series-3-premium-for-shaft-diameter-40mm-sku-64624001/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-3 ISO series 3 premium for shaft diameter 40mm SKU: 64624000](https://maedler.in/product/linear-slide-bearing-po-3-iso-series-3-premium-for-shaft-diameter-40mm-sku-64624000/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-1 ISO series 1 premium for shaft diameter 30 mm outside diameter 40 mm length 50 mm SKU: 64623030P](https://maedler.in/product/linear-slide-bearing-po-1-iso-series-1-premium-for-shaft-diameter-30-mm-outside-diameter-40-mm-length-50-mm-sku-64623030p/): Material: self-lubricationg sliding material is polyacetal with a specific polyethylene.The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used.These self-holding linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 1 and can be fitted in the same housings. Tolerances: Mounting hole H6, shaft h6. Temperature range: -40ºC to +80ºC.* Nominal size for the mounting hole. The bearing is made with oversize for press fit, 0.1 to 0.3 mm, depending on the size. - [Open Linear slide bearing PO-3-O ISO series 3 premium for shaft diameter 30mm SKU: 64623001](https://maedler.in/product/open-linear-slide-bearing-po-3-o-iso-series-3-premium-for-shaft-diameter-30mm-sku-64623001/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-3 ISO series 3 premium for shaft diameter 30mm SKU: 64623000](https://maedler.in/product/linear-slide-bearing-po-3-iso-series-3-premium-for-shaft-diameter-30mm-sku-64623000/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-1 ISO series 1 premium for shaft diameter 25 mm outside diameter 35 mm length 40 mm SKU: 64622525P](https://maedler.in/product/linear-slide-bearing-po-1-iso-series-1-premium-for-shaft-diameter-25-mm-outside-diameter-35-mm-length-40-mm-sku-64622525p/): Material: self-lubricationg sliding material is polyacetal with a specific polyethylene.The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used.These self-holding linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 1 and can be fitted in the same housings. Tolerances: Mounting hole H6, shaft h6. Temperature range: -40ºC to +80ºC.* Nominal size for the mounting hole. The bearing is made with oversize for press fit, 0.1 to 0.3 mm, depending on the size. - [Open Linear slide bearing PO-3-O ISO series 3 premium for shaft diameter 25mm SKU: 64622501](https://maedler.in/product/open-linear-slide-bearing-po-3-o-iso-series-3-premium-for-shaft-diameter-25mm-sku-64622501/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-3 ISO series 3 premium for shaft diameter 25mm SKU: 64622500](https://maedler.in/product/linear-slide-bearing-po-3-iso-series-3-premium-for-shaft-diameter-25mm-sku-64622500/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-1 ISO series 1 premium for shaft diameter 20 mm outside diameter 28 mm length 30 mm SKU: 64622020P](https://maedler.in/product/linear-slide-bearing-po-1-iso-series-1-premium-for-shaft-diameter-20-mm-outside-diameter-28-mm-length-30-mm-sku-64622020p/): Material: self-lubricationg sliding material is polyacetal with a specific polyethylene.The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used.These self-holding linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 1 and can be fitted in the same housings. Tolerances: Mounting hole H6, shaft h6. Temperature range: -40ºC to +80ºC.* Nominal size for the mounting hole. The bearing is made with oversize for press fit, 0.1 to 0.3 mm, depending on the size. - [Open Linear slide bearing PO-3-O ISO series 3 premium for shaft diameter 20mm SKU: 64622001](https://maedler.in/product/open-linear-slide-bearing-po-3-o-iso-series-3-premium-for-shaft-diameter-20mm-sku-64622001/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-3 ISO series 3 premium for shaft diameter 20mm SKU: 64622000](https://maedler.in/product/linear-slide-bearing-po-3-iso-series-3-premium-for-shaft-diameter-20mm-sku-64622000/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-1 ISO series 1 premium for shaft diameter 16 mm outside diameter 24 mm length 30 mm SKU: 64621616P](https://maedler.in/product/linear-slide-bearing-po-1-iso-series-1-premium-for-shaft-diameter-16-mm-outside-diameter-24-mm-length-30-mm-sku-64621616p/): Material: self-lubricationg sliding material is polyacetal with a specific polyethylene.The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used.These self-holding linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 1 and can be fitted in the same housings. Tolerances: Mounting hole H6, shaft h6. Temperature range: -40ºC to +80ºC.* Nominal size for the mounting hole. The bearing is made with oversize for press fit, 0.1 to 0.3 mm, depending on the size. - [Open Linear slide bearing PO-3-O ISO series 3 premium for shaft diameter 16mm SKU: 64621601](https://maedler.in/product/open-linear-slide-bearing-po-3-o-iso-series-3-premium-for-shaft-diameter-16mm-sku-64621601/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-3 ISO series 3 premium for shaft diameter 16mm SKU: 64621600](https://maedler.in/product/linear-slide-bearing-po-3-iso-series-3-premium-for-shaft-diameter-16mm-sku-64621600/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-1 ISO series 1 premium for shaft diameter 14 mm outside diameter 21 mm length 28 mm SKU: 64621414P](https://maedler.in/product/linear-slide-bearing-po-1-iso-series-1-premium-for-shaft-diameter-14-mm-outside-diameter-21-mm-length-28-mm-sku-64621414p/): Material: self-lubricationg sliding material is polyacetal with a specific polyethylene.The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used.These self-holding linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 1 and can be fitted in the same housings. Tolerances: Mounting hole H6, shaft h6. Temperature range: -40ºC to +80ºC.* Nominal size for the mounting hole. The bearing is made with oversize for press fit, 0.1 to 0.3 mm, depending on the size. - [Linear slide bearing PO-1 ISO series 1 premium for shaft diameter 12 mm outside diameter 19 mm length 28 mm SKU: 64621212P](https://maedler.in/product/linear-slide-bearing-po-1-iso-series-1-premium-for-shaft-diameter-12-mm-outside-diameter-19-mm-length-28-mm-sku-64621212p/): Material: self-lubricationg sliding material is polyacetal with a specific polyethylene.The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used.These self-holding linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 1 and can be fitted in the same housings. Tolerances: Mounting hole H6, shaft h6. Temperature range: -40ºC to +80ºC.* Nominal size for the mounting hole. The bearing is made with oversize for press fit, 0.1 to 0.3 mm, depending on the size. - [Open Linear slide bearing PO-3-O ISO series 3 premium for shaft diameter 12mm SKU: 64621201](https://maedler.in/product/open-linear-slide-bearing-po-3-o-iso-series-3-premium-for-shaft-diameter-12mm-sku-64621201/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-3 ISO series 3 premium for shaft diameter 12mm SKU: 64621200](https://maedler.in/product/linear-slide-bearing-po-3-iso-series-3-premium-for-shaft-diameter-12mm-sku-64621200/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-3 ISO series 3 premium for shaft diameter 8mm SKU: 64620800](https://maedler.in/product/linear-slide-bearing-po-3-iso-series-3-premium-for-shaft-diameter-8mm-sku-64620800/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [Linear slide bearing PO-3 ISO series 3 premium for shaft diameter 5mm SKU: 64620500](https://maedler.in/product/linear-slide-bearing-po-3-iso-series-3-premium-for-shaft-diameter-5mm-sku-64620500/): Material: Polyacetal with a specific polyethylene. Linear slide bearings have the same external dimensions as the linear bearings of the ISO Series 3. The linear slide bearings should be specifically chosen if, due to unusual operating conditions, linear bearings cannot be used. Linear slide bearings feature the same mounting and securing options as the linear bearings of the ISO Series 3 and can be fitted in the same housings. Temperature range: -40°C to +80°C. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 90-110mm band width 9mm SKU: 63814110](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-90-110mm-band-width-9mm-sku-63814110/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 80-100mm band width 9mm SKU: 63814100](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-80-100mm-band-width-9mm-sku-63814100/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 70-90mm band width 9mm SKU: 63814090](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-70-90mm-band-width-9mm-sku-63814090/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 60-80mm band width 9mm SKU: 63814080](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-60-80mm-band-width-9mm-sku-63814080/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 50-70mm band width 9mm SKU: 63814070](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-50-70mm-band-width-9mm-sku-63814070/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 40-60mm band width 9mm SKU: 63814060](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-40-60mm-band-width-9mm-sku-63814060/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 32-50mm band width 9mm SKU: 63814050](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-32-50mm-band-width-9mm-sku-63814050/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 30-45mm band width 9mm SKU: 63814045](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-30-45mm-band-width-9mm-sku-63814045/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 25-40mm band width 9mm SKU: 63814040](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-25-40mm-band-width-9mm-sku-63814040/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 23-35mm band width 9mm SKU: 63814035](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-23-35mm-band-width-9mm-sku-63814035/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 20-32mm band width 9mm SKU: 63814032](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-20-32mm-band-width-9mm-sku-63814032/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 16-27mm band width 9mm SKU: 63814027](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-16-27mm-band-width-9mm-sku-63814027/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 12-22mm band width 9mm SKU: 63814020](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-12-22mm-band-width-9mm-sku-63814020/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 10-16mm band width 9mm SKU: 63814016](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-10-16mm-band-width-9mm-sku-63814016/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 8-12mm band width 9mm SKU: 63814012](https://maedler.in/product/hose-clamp-din-3017-a-type-w4-stainless-steel-1-4301-diameter-range-8-12mm-band-width-9mm-sku-63814012/): Material: Stainless steel 1.4301, AISI 304 (type W4). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 90-110mm band width 9mm SKU: 63811110](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-90-110mm-band-width-9mm-sku-63811110/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 80-100mm band width 9mm SKU: 63811100](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-80-100mm-band-width-9mm-sku-63811100/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 70-90mm band width 9mm SKU: 63811090](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-70-90mm-band-width-9mm-sku-63811090/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 60-80mm band width 9mm SKU: 63811080](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-60-80mm-band-width-9mm-sku-63811080/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 50-70mm band width 9mm SKU: 63811070](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-50-70mm-band-width-9mm-sku-63811070/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 40- 60mm band width 9mm SKU: 63811060](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-40-60mm-band-width-9mm-sku-63811060/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 32-50mm band width 9mm SKU: 63811050](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-32-50mm-band-width-9mm-sku-63811050/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 30-45mm band width 9mm SKU: 63811045](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-30-45mm-band-width-9mm-sku-63811045/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 25-40mm band width 9mm SKU: 63811040](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-25-40mm-band-width-9mm-sku-63811040/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 23-35mm band width 9mm SKU: 63811035](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-23-35mm-band-width-9mm-sku-63811035/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 20-32mm band width 9mm SKU: 63811032](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-20-32mm-band-width-9mm-sku-63811032/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 16-27mm band width 9mm SKU: 63811027](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-16-27mm-band-width-9mm-sku-63811027/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 12-22mm band width 9mm SKU: 63811020](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-12-22mm-band-width-9mm-sku-63811020/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 10-16mm band width 9mm SKU: 63811016](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-10-16mm-band-width-9mm-sku-63811016/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [hose clamp DIN 3017 A type W1 steel zinc plated diameter range 8-12mm band width 9mm SKU: 63811012](https://maedler.in/product/hose-clamp-din-3017-a-type-w1-steel-zinc-plated-diameter-range-8-12mm-band-width-9mm-sku-63811012/): Material: Steel, zinc-plated (type W1). High-performance hose clamps with worm gear thread, for fixing hoses, bellows and for similar usage. Band width 9 mm. Band thickness 0.6 mm. With hexagon screw head size 7 mm, with cross recess and slot. Other sizes and versions on request. - [Bolt with pin hole size 50 x 115 x 103 stainless steel 1.4301; for clevis 50 x 96 SKU: 63799450](https://maedler.in/product/bolt-with-pin-hole-size-50-x-115-x-103-stainless-steel-1-4301-for-clevis-50-x-96-sku-63799450/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 42 x 100 x 90 stainless steel 1.4301; for clevis 42 x 84 SKU: 63799442](https://maedler.in/product/bolt-with-pin-hole-size-42-x-100-x-90-stainless-steel-1-4301-for-clevis-42-x-84-sku-63799442/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 40 x 100 x 90 stainless steel 1.4301; for clevis 40 x 84 SKU: 63799440](https://maedler.in/product/bolt-with-pin-hole-size-40-x-100-x-90-stainless-steel-1-4301-for-clevis-40-x-84-sku-63799440/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 30 x 77 x 68,2 stainless steel 1.4301; for clevis 30 x 54 SKU: 63799431](https://maedler.in/product/bolt-with-pin-hole-size-30-x-77-x-682-stainless-steel-1-4301-for-clevis-30-x-54-sku-63799431/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 30 x 67 x 59 stainless steel 1.4301; for clevis 30 x 54 SKU: 63799430](https://maedler.in/product/bolt-with-pin-hole-size-30-x-67-x-59-stainless-steel-1-4301-for-clevis-30-x-54-sku-63799430/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 28 x 72 x 63,2 stainless steel 1.4301; for clevis 28 x 56 SKU: 63799428](https://maedler.in/product/bolt-with-pin-hole-size-28-x-72-x-632-stainless-steel-1-4301-for-clevis-28-x-56-sku-63799428/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 25 x 67 x 59 stainless steel 1.4301; for clevis 25 x 50 SKU: 63799425](https://maedler.in/product/bolt-with-pin-hole-size-25-x-67-x-59-stainless-steel-1-4301-for-clevis-25-x-50-sku-63799425/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 20 x 53 x 47 stainless steel 1.4301; for clevis 20 x 40 and 20 x 80 SKU: 63799420](https://maedler.in/product/bolt-with-pin-hole-size-20-x-53-x-47-stainless-steel-1-4301-for-clevis-20-x-40-and-20-x-80-sku-63799420/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 18 x 50 x 43,5 stainless steel 1.4301; for clevis 18 x 36 SKU: 63799418](https://maedler.in/product/bolt-with-pin-hole-size-18-x-50-x-435-stainless-steel-1-4301-for-clevis-18-x-36-sku-63799418/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 16 x 45 x 38,2 stainless steel 1.4301; for clevis 16 x 32 and 16 x 64 SKU: 63799416](https://maedler.in/product/bolt-with-pin-hole-size-16-x-45-x-382-stainless-steel-1-4301-for-clevis-16-x-32-and-16-x-64-sku-63799416/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 14 x 40 x 32,5 stainless steel 1.4301; for clevis 14 x 28 and 14 x 56 SKU: 63799414](https://maedler.in/product/bolt-with-pin-hole-size-14-x-40-x-325-stainless-steel-1-4301-for-clevis-14-x-28-and-14-x-56-sku-63799414/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 12 x 35 x 29,5 stainless steel 1.4301; for clevis 12 x 24 and 12 x 48 SKU: 63799412](https://maedler.in/product/bolt-with-pin-hole-size-12-x-35-x-295-stainless-steel-1-4301-for-clevis-12-x-24-and-12-x-48-sku-63799412/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Bolt with pin hole size 10 x 29 x 24,5 stainless steel 1.4301; for clevis 10 x 20 and 10 x 40 SKU: 63799410](https://maedler.in/product/bolt-with-pin-hole-size-10-x-29-x-245-stainless-steel-1-4301-for-clevis-10-x-20-and-10-x-40-sku-63799410/): Material: Stainless steel 1.4301 (AISI 305).Bolts for transmission of radial forces with slightly part-turn movement, like in clevis joints. With pinhole for a split pin DIN EN ISO 1234 (formerly DIN 94) or a spring cotter pin. To be used with one washer DIN EN ISO 7089 (formerly DIN 125 A). The pin is only a protection against unwanted loosening. Not for axial load. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=400:1 output speed approx. 7 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403400](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i4001-output-speed-approx-7-rpm-permitted-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=250:1 output speed approx. 11 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403250](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i2501-output-speed-approx-11-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=125:1 output speed approx. 22 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403125](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i1251-output-speed-approx-22-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=100:1 output speed approx. 28 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403100](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i1001-output-speed-approx-28-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=70:1 output speed approx. 40 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403070](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i701-output-speed-approx-40-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 56 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403050](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i501-output-speed-approx-56-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 112 rpm Md2=6.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403025](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i251-output-speed-approx-112-rpm-md26-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=12.5:1 output speed approx. 224 rpm Md2=3.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403012](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i12-51-output-speed-approx-224-rpm-md23-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=1500:1 output speed approx. 0.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402992](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i15001-output-speed-approx-0-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=1250:1 output speed approx. 1.1 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402990](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i12501-output-speed-approx-1-1-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=750:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402750](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i7501-output-speed-approx-1-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=400:1 output speed approx. 3. 5 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402400](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i4001-output-speed-approx-3-5-rpm-permitted-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=250:1 output speed approx. 5.6 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402250](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i2501-output-speed-approx-5-6-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=125:1 output speed approx. 11 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402125](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i1251-output-speed-approx-11-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402100](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=70:1 output speed approx. 20 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402070](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i701-output-speed-approx-20-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402050](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=25:1 output speed approx. 56 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402025](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i251-output-speed-approx-56-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 90 Watt 230/400V 50Hz IE1 i=12.5:1 output speed approx. 112 rpm Md2=4.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43402012](https://maedler.in/product/worm-geared-motor-mz-90-watt-230-400v-50hz-ie1-i12-51-output-speed-approx-112-rpm-md24-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=80:1 output speed approx. 18 rpm permitted Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337080](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i801-output-speed-approx-18-rpm-permitted-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 23 rpm permitted Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337060](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i601-output-speed-approx-23-rpm-permitted-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 28 rpm permitted Md2=32Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337050](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i501-output-speed-approx-28-rpm-permitted-md232nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=40:1 output speed approx. 35 rpm Md2=31Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337040](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i401-output-speed-approx-35-rpm-md231nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337030](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 56 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337025](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i251-output-speed-approx-56-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=21Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337020](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md221nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337015](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=12:1 output speed approx. 117 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337012](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i121-output-speed-approx-117-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=10:1 output speed approx. 140 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337010](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i101-output-speed-approx-140-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=8:1 output speed approx. 175 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337008](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i81-output-speed-approx-175-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 250 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 207 rpm Md2=9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43337007](https://maedler.in/product/worm-geared-motor-rh-250-watt-230-400v-50hz-ie2-i71-output-speed-approx-207-rpm-md29nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=80:1 output speed approx. 18 rpm permitted Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336080](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i801-output-speed-approx-18-rpm-permitted-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 23 rpm Md2=21Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336060](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i601-output-speed-approx-23-rpm-md221nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 28 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336050](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i501-output-speed-approx-28-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=40:1 output speed approx. 35 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336040](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i401-output-speed-approx-35-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm Md2=20Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336030](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-md220nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 56 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336025](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i251-output-speed-approx-56-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336020](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336015](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=12:1 output speed approx. 117 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336012](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i121-output-speed-approx-117-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=10:1 output speed approx. 140 rpm Md2=9.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336010](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i101-output-speed-approx-140-rpm-md29-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=8:1 output speed approx. 175 rpm Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336008](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i81-output-speed-approx-175-rpm-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RH 180 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 207 rpm Md2=6.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43336007](https://maedler.in/product/worm-geared-motor-rh-180-watt-230-400v-50hz-ie2-i71-output-speed-approx-207-rpm-md26-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=75:1 output speed approx. 37 rpm permitted Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331075](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i751-output-speed-approx-37-rpm-permitted-md211nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=56:1 output speed approx. 50 rpm permitted Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331056](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i561-output-speed-approx-50-rpm-permitted-md212nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=38:1 output speed approx. 74 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331038](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i381-output-speed-approx-74-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=32:1 output speed approx. 88 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331032](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i321-output-speed-approx-88-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 93 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331030](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i301-output-speed-approx-93-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=24:1 output speed approx. 117 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331024](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i241-output-speed-approx-117-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 140 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331020](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i201-output-speed-approx-140-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=17:1 output speed approx. 165 rpm Md2=9.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331017](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i171-output-speed-approx-165-rpm-md29-6nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 187 rpm Md2=8.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331015](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i151-output-speed-approx-187-rpm-md28-3nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=11:1 output speed approx. 247 rpm Md2=6.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331011](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i111-output-speed-approx-247-rpm-md26-8nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 400 rpm Md2=4.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331007](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i71-output-speed-approx-400-rpm-md24-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 250 Watt 230/400V 50Hz IE2 i=5:1 output speed approx. 560 rpm Md2=3.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43331005](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-250-watt-230-400v-50hz-ie2-i51-output-speed-approx-560-rpm-md23-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=75:1 output speed approx. 19 rpm permitted Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330075](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i751-output-speed-approx-19-rpm-permitted-md211nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=56:1 output speed approx. 25 rpm permitted Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330056](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i561-output-speed-approx-25-rpm-permitted-md212nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=38:1 output speed approx. 37 rpm permitted Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330038](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i381-output-speed-approx-37-rpm-permitted-md217nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=32:1 output speed approx. 44 rpm permitted Md2=16Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330032](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i321-output-speed-approx-44-rpm-permitted-md216nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm permitted Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330030](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-permitted-md215nm-for-operating-instructions-please-visit-the-download-area-of-ou/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=24:1 output speed approx. 58 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330024](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i241-output-speed-approx-58-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330020](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=17:1 output speed approx. 82 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330017](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i171-output-speed-approx-82-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330015](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=11:1 output speed approx. 124 rpm Md2=9.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330011](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i111-output-speed-approx-124-rpm-md29-3nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 200 rpm Md2=6.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330007](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i71-output-speed-approx-200-rpm-md26-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MH with hollow shaft 180 Watt 230/400V 50Hz IE2 i=5:1 output speed approx. 280 rpm Md2=4.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43330005](https://maedler.in/product/worm-geared-motor-mh-with-hollow-shaft-180-watt-230-400v-50hz-ie2-i51-output-speed-approx-280-rpm-md24-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=80:1 output speed approx. 18 rpm zulässiges Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309080](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i801-output-speed-approx-18-rpm-zulassiges-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 23 rpm permitted Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309060](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i601-output-speed-approx-23-rpm-permitted-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 28 rpm permitted Md2=32Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309050](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i501-output-speed-approx-28-rpm-permitted-md232nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=40:1 output speed approx. 35 rpm Md2=31Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309040](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i401-output-speed-approx-35-rpm-md231nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309030](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 56 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309025](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i251-output-speed-approx-56-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=21Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309020](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md221nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309015](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=12:1 output speed approx. 117 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309012](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i121-output-speed-approx-117-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=10:1 output speed approx. 140 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309010](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i101-output-speed-approx-140-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=8:1 output speed ca 175 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309008](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i81-output-speed-ca-175-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-433/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 250 Watt 230/400V 50Hz IE2 i=7:1 output speed ca 207 rpm Md2=9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43309007](https://maedler.in/product/worm-geared-motor-r-250-watt-230-400v-50hz-ie2-i71-output-speed-ca-207-rpm-md29nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4330/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=80:1 output speed approx. 18 rpm permitted Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308080](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i801-output-speed-approx-18-rpm-permitted-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 23 rpm Md2=31Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308060](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i601-output-speed-approx-23-rpm-md231nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 28 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308050](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i501-output-speed-approx-28-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=40:1 output speed approx. 35 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308040](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i401-output-speed-approx-35-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 47 rpm Md2=20Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308030](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i301-output-speed-approx-47-rpm-md220nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 56 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308025](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i251-output-speed-approx-56-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 70 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308020](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i201-output-speed-approx-70-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 93 rpm Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308015](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i151-output-speed-approx-93-rpm-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=12:1 output speed approx. 117 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308012](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i121-output-speed-approx-117-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=10:1 output speed approx. 140 rpm Md2=9.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308010](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i101-output-speed-approx-140-rpm-md29-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=8:1 output speed approx. 175 rpm Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308008](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i81-output-speed-approx-175-rpm-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor R 180 Watt 230/400V 50Hz IE2 i=7:1 output speed approx. 207 rpm Md2=6.5Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43308007](https://maedler.in/product/worm-geared-motor-r-180-watt-230-400v-50hz-ie2-i71-output-speed-approx-207-rpm-md26-5nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=75:1 output speed approx. 37 rpm permitted Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306075](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i751-output-speed-approx-37-rpm-permitted-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=56:1 output speed approx. 50 rpm permitted Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306056](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i561-output-speed-approx-50-rpm-permitted-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=38:1 output speed approx. 74 rpm Md2=15Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306038](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i381-output-speed-approx-74-rpm-md215nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=32:1 output speed approx. 88 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306032](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i321-output-speed-approx-88-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 93 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306030](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i301-output-speed-approx-93-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=24:1 output speed approx. 117 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306024](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i241-output-speed-approx-117-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=20:1 output speed approx. 140 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306020](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i201-output-speed-approx-140-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=17:1 output speed approx. 165 rpm Md2=9.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306017](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i171-output-speed-approx-165-rpm-md29-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MEG 250 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 187 rpm Md2=8.3Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43306015](https://maedler.in/product/worm-geared-motor-meg-250-watt-230-400v-50hz-ie2-i151-output-speed-approx-187-rpm-md28-3nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Sprocket KRT 12 B-1 3/4x7/16" 38 teeth material steel for taper bush type 2517 SKU: 10777138](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-38-teeth-material-steel-for-taper-bush-type-2517-sku-10777138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 30 teeth material steel for taper bush type 2517 SKU: 10777130](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-30-teeth-material-steel-for-taper-bush-type-2517-sku-10777130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 28 teeth material steel for taper bush type 2517 SKU: 10777128](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-28-teeth-material-steel-for-taper-bush-type-2517-sku-10777128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 27 teeth material steel for taper bush type 2517 SKU: 10777127](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-27-teeth-material-steel-for-taper-bush-type-2517-sku-10777127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 26 teeth material steel for taper bush type 2517 SKU: 10777126](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-26-teeth-material-steel-for-taper-bush-type-2517-sku-10777126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 25 teeth material steel for taper bush type 2517 SKU: 10777125](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-25-teeth-material-steel-for-taper-bush-type-2517-sku-10777125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 24 teeth material steel for taper bush type 2517 SKU: 10777124](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-24-teeth-material-steel-for-taper-bush-type-2517-sku-10777124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 23 teeth material steel for taper bush type 2517 SKU: 10777123](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-23-teeth-material-steel-for-taper-bush-type-2517-sku-10777123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 22 teeth material steel for taper bush type 2517 SKU: 10777122](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-22-teeth-material-steel-for-taper-bush-type-2517-sku-10777122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 21 teeth material steel for taper bush type 2517 SKU: 10777121](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-21-teeth-material-steel-for-taper-bush-type-2517-sku-10777121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 20 teeth material steel for taper bush type 2012 SKU: 10777120](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-20-teeth-material-steel-for-taper-bush-type-2012-sku-10777120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 19 teeth material steel for taper bush type 2012 SKU: 10777119](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-19-teeth-material-steel-for-taper-bush-type-2012-sku-10777119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 18 teeth material steel for taper bush type 2012 SKU: 10777118](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-18-teeth-material-steel-for-taper-bush-type-2012-sku-10777118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 17 teeth material steel for taper bush type 1610 SKU: 10777117](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-17-teeth-material-steel-for-taper-bush-type-1610-sku-10777117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 16 teeth material steel for taper bush type 1610 SKU: 10777116](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-16-teeth-material-steel-for-taper-bush-type-1610-sku-10777116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 15 teeth material steel for taper bush type 1610 SKU: 10777115](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-15-teeth-material-steel-for-taper-bush-type-1610-sku-10777115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 14 teeth material steel for taper bush type 1610 SKU: 10777114](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-14-teeth-material-steel-for-taper-bush-type-1610-sku-10777114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 13 teeth material steel for taper bush type 1210 SKU: 10777113](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-13-teeth-material-steel-for-taper-bush-type-1210-sku-10777113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 95 teeth material steel SKU: 10728300](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-95-teeth-material-steel-sku-10728300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 80 teeth material steel SKU: 10728000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-80-teeth-material-steel-sku-10728000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 76 teeth material steel SKU: 10727600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-76-teeth-material-steel-sku-10727600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 72 teeth material steel SKU: 10727200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-72-teeth-material-steel-sku-10727200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 70 teeth material steel SKU: 10727000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-70-teeth-material-steel-sku-10727000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 65 teeth material steel SKU: 10726500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-65-teeth-material-steel-sku-10726500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 60 teeth material steel SKU: 10726000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-60-teeth-material-steel-sku-10726000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 57 teeth material steel SKU: 10725700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-57-teeth-material-steel-sku-10725700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 54 teeth material steel SKU: 10725400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-54-teeth-material-steel-sku-10725400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 50 teeth material steel SKU: 10725000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-50-teeth-material-steel-sku-10725000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 48 teeth material steel SKU: 10724800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-48-teeth-material-steel-sku-10724800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 47 teeth material steel SKU: 10724700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-47-teeth-material-steel-sku-10724700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 46 teeth material steel SKU: 10724600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-46-teeth-material-steel-sku-10724600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 45 teeth material steel SKU: 10724500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-45-teeth-material-steel-sku-10724500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 44 teeth material steel SKU: 10724400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-44-teeth-material-steel-sku-10724400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 42 teeth material steel SKU: 10724200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-42-teeth-material-steel-sku-10724200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 40 teeth material steel SKU: 10724000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-40-teeth-material-steel-sku-10724000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 38 teeth material steel SKU: 10723800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-38-teeth-material-steel-sku-10723800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 36 teeth material steel SKU: 10723600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-36-teeth-material-steel-sku-10723600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 35 teeth material steel SKU: 10723500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-35-teeth-material-steel-sku-10723500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 34 teeth material steel SKU: 10723400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-34-teeth-material-steel-sku-10723400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 32 teeth material steel SKU: 10723200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-32-teeth-material-steel-sku-10723200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 30 teeth material steel SKU: 10723000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-30-teeth-material-steel-sku-10723000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 29 teeth material steel SKU: 10722900](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-29-teeth-material-steel-sku-10722900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 28 teeth material steel SKU: 10722800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-28-teeth-material-steel-sku-10722800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 27 teeth material steel SKU: 10722700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-27-teeth-material-steel-sku-10722700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 26 teeth material steel SKU: 10722600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-26-teeth-material-steel-sku-10722600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 25 teeth material steel SKU: 10722500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-25-teeth-material-steel-sku-10722500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 24 teeth material steel SKU: 10722400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-24-teeth-material-steel-sku-10722400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 23 teeth material steel SKU: 10722300](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-23-teeth-material-steel-sku-10722300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 22 teeth material steel SKU: 10722200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-22-teeth-material-steel-sku-10722200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 21 teeth material steel SKU: 10722100](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-21-teeth-material-steel-sku-10722100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 20 teeth material steel SKU: 10722000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-20-teeth-material-steel-sku-10722000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 19 teeth material steel SKU: 10721900](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-19-teeth-material-steel-sku-10721900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 18 teeth material steel SKU: 10721800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-18-teeth-material-steel-sku-10721800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 17 teeth material steel SKU: 10721700](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-17-teeth-material-steel-sku-10721700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 16 teeth material steel SKU: 10721600](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-16-teeth-material-steel-sku-10721600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 15 teeth material steel SKU: 10721500](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-15-teeth-material-steel-sku-10721500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 14 teeth material steel SKU: 10721400](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-14-teeth-material-steel-sku-10721400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 13 teeth material steel SKU: 10721300](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-13-teeth-material-steel-sku-10721300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 12 teeth material steel SKU: 10721200](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-12-teeth-material-steel-sku-10721200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 11 teeth material steel SKU: 10721100](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-11-teeth-material-steel-sku-10721100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 10 teeth material steel SKU: 10721000](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-10-teeth-material-steel-sku-10721000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 9 teeth material steel SKU: 10720900](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-9-teeth-material-steel-sku-10720900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 12 B-1 3/4x7/16" 8 teeth material steel SKU: 10720800](https://maedler.in/product/plate-wheel-krl-without-hub-12-b-1-3-4x7-16-8-teeth-material-steel-sku-10720800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 114 teeth material cast iron SKU: 10718800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-114-teeth-material-cast-iron-sku-10718800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 95 teeth material cast iron SKU: 10718300](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-95-teeth-material-cast-iron-sku-10718300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 76 teeth material cast iron SKU: 10717600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-76-teeth-material-cast-iron-sku-10717600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 57 teeth material cast iron SKU: 10715700](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-57-teeth-material-cast-iron-sku-10715700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 50 teeth material steel SKU: 10715000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-50-teeth-material-steel-sku-10715000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 48 teeth material steel SKU: 10714800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-48-teeth-material-steel-sku-10714800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 45 teeth material cast iron SKU: 10714500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-45-teeth-material-cast-iron-sku-10714500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 40 teeth material steel SKU: 10714000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-40-teeth-material-steel-sku-10714000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 38 teeth material steel SKU: 10713800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-38-teeth-material-steel-sku-10713800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 36 teeth material steel SKU: 10713600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-36-teeth-material-steel-sku-10713600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 35 teeth material steel SKU: 10713500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-35-teeth-material-steel-sku-10713500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 34 teeth material steel SKU: 10713400](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-34-teeth-material-steel-sku-10713400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 32 teeth material steel SKU: 10713200](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-32-teeth-material-steel-sku-10713200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 30 teeth material steel SKU: 10713000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-30-teeth-material-steel-sku-10713000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 28 teeth material steel SKU: 10712800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-28-teeth-material-steel-sku-10712800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 27 teeth material steel SKU: 10712700](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-27-teeth-material-steel-sku-10712700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 26 teeth material steel SKU: 10712600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-26-teeth-material-steel-sku-10712600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 25 teeth material steel SKU: 10712500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-25-teeth-material-steel-sku-10712500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 24 teeth material steel SKU: 10712400](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-24-teeth-material-steel-sku-10712400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 23 teeth material steel SKU: 10712300](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-23-teeth-material-steel-sku-10712300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 22 teeth material steel SKU: 10712200](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-22-teeth-material-steel-sku-10712200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 21 teeth material steel SKU: 10712100](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-21-teeth-material-steel-sku-10712100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 20 teeth material steel SKU: 10712000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-20-teeth-material-steel-sku-10712000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 19 teeth material steel SKU: 10711900](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-19-teeth-material-steel-sku-10711900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 18 teeth material steel SKU: 10711800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-18-teeth-material-steel-sku-10711800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 17 teeth material steel SKU: 10711700](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-17-teeth-material-steel-sku-10711700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 16 teeth material steel SKU: 10711600](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-16-teeth-material-steel-sku-10711600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 15 teeth material steel SKU: 10711500](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-15-teeth-material-steel-sku-10711500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 14 teeth material steel SKU: 10711400](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-14-teeth-material-steel-sku-10711400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 13 teeth material steel SKU: 10711300](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-13-teeth-material-steel-sku-10711300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 12 teeth material steel SKU: 10711200](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-12-teeth-material-steel-sku-10711200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 11 teeth material steel SKU: 10711100](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-11-teeth-material-steel-sku-10711100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 10 teeth material steel SKU: 10711000](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-10-teeth-material-steel-sku-10711000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 9 teeth material steel SKU: 10710900](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-9-teeth-material-steel-sku-10710900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRS with hub 12 B-1 3/4x7/16" 8 teeth material steel SKU: 10710800](https://maedler.in/product/sprocket-krs-with-hub-12-b-1-3-4x7-16-8-teeth-material-steel-sku-10710800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699130](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Sprocket KRR with hub 10 B-1 5/8x3/8" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10699125](https://maedler.in/product/sprocket-krr-with-hub-10-b-1-5-8x3-8-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10699125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Clamp collar for splined hub DIN 14 KN 46x54 diameter 100mm stainless steel 1.4305 SKU: 64899614](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-46x54-diameter-100mm-stainless-steel-1-4305-sku-64899614/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 36x42 diameter 90mm stainless steel 1.4305 SKU: 64899612](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-36x42-diameter-90mm-stainless-steel-1-4305-sku-64899612/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 42x48 diameter 95mm stainless steel 1.4305 SKU: 64899610](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-42x48-diameter-95mm-stainless-steel-1-4305-sku-64899610/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 28x34 diameter 78mm stainless steel 1.4305 SKU: 64899609](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-28x34-diameter-78mm-stainless-steel-1-4305-sku-64899609/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 32x38 diameter 82mm stainless steel 1.4305 SKU: 64899608](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-32x38-diameter-82mm-stainless-steel-1-4305-sku-64899608/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 26x32 diameter 70mm stainless steel 1.4305 SKU: 64899607](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-26x32-diameter-70mm-stainless-steel-1-4305-sku-64899607/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 21x25 diameter 62mm stainless steel 1.4305 SKU: 64899606](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-21x25-diameter-62mm-stainless-steel-1-4305-sku-64899606/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 16x20 diameter 52mm stainless steel 1.4305 SKU: 64899605](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-16x20-diameter-52mm-stainless-steel-1-4305-sku-64899605/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 13x16 diameter 50mm stainless steel 1.4305 SKU: 64899604](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-13x16-diameter-50mm-stainless-steel-1-4305-sku-64899604/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 23x28 diameter 64mm stainless steel 1.4305 SKU: 64899603](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-23x28-diameter-64mm-stainless-steel-1-4305-sku-64899603/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 11x14 diameter 42mm stainless steel 1.4305 SKU: 64899602](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-11x14-diameter-42mm-stainless-steel-1-4305-sku-64899602/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 18x22 diameter 54mm stainless steel 1.4305 SKU: 64899601](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-18x22-diameter-54mm-stainless-steel-1-4305-sku-64899601/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Splined hub with flange DIN 14 KN 46X54 length 100mm stainless steel 1.4305 SKU: 64899514](https://maedler.in/product/splined-hub-with-flange-din-14-kn-46x54-length-100mm-stainless-steel-1-4305-sku-64899514/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 36X42 length 80mm stainless steel 1.4305 SKU: 64899512](https://maedler.in/product/splined-hub-with-flange-din-14-kn-36x42-length-80mm-stainless-steel-1-4305-sku-64899512/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 42X48 length 80mm stainless steel 1.4305 SKU: 64899510](https://maedler.in/product/splined-hub-with-flange-din-14-kn-42x48-length-80mm-stainless-steel-1-4305-sku-64899510/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 28X34 length 60mm stainless steel 1.4305 SKU: 64899509](https://maedler.in/product/splined-hub-with-flange-din-14-kn-28x34-length-60mm-stainless-steel-1-4305-sku-64899509/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 32X38 length 60mm stainless steel 1.4305 SKU: 64899508](https://maedler.in/product/splined-hub-with-flange-din-14-kn-32x38-length-60mm-stainless-steel-1-4305-sku-64899508/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 26X32 length 60mm stainless steel 1.4305 SKU: 64899507](https://maedler.in/product/splined-hub-with-flange-din-14-kn-26x32-length-60mm-stainless-steel-1-4305-sku-64899507/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 21X25 length 50mm stainless steel 1.4305 SKU: 64899506](https://maedler.in/product/splined-hub-with-flange-din-14-kn-21x25-length-50mm-stainless-steel-1-4305-sku-64899506/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 16X20 length 40mm stainless steel 1.4305 SKU: 64899505](https://maedler.in/product/splined-hub-with-flange-din-14-kn-16x20-length-40mm-stainless-steel-1-4305-sku-64899505/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 13X16 length 40mm stainless steel 1.4305 SKU: 64899504](https://maedler.in/product/splined-hub-with-flange-din-14-kn-13x16-length-40mm-stainless-steel-1-4305-sku-64899504/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 23X28 length 55mm stainless steel 1.4305 SKU: 64899503](https://maedler.in/product/splined-hub-with-flange-din-14-kn-23x28-length-55mm-stainless-steel-1-4305-sku-64899503/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 11X14 length 35mm stainless steel 1.4305 SKU: 64899502](https://maedler.in/product/splined-hub-with-flange-din-14-kn-11x14-length-35mm-stainless-steel-1-4305-sku-64899502/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 18X22 length 45mm stainless steel 1.4305 SKU: 64899501](https://maedler.in/product/splined-hub-with-flange-din-14-kn-18x22-length-45mm-stainless-steel-1-4305-sku-64899501/): Material: Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub DIN 14 KN 46X54 length 90mm diameter 80mm stainless steel 1.4305 SKU: 64899314](https://maedler.in/product/splined-hub-din-14-kn-46x54-length-90mm-diameter-80mm-stainless-steel-1-4305-sku-64899314/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 36X42 length 65mm diameter 70mm stainless steel 1.4305 SKU: 64899312](https://maedler.in/product/splined-hub-din-14-kn-36x42-length-65mm-diameter-70mm-stainless-steel-1-4305-sku-64899312/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 42X48 length 70mm diameter 80mm stainless steel 1.4305 SKU: 64899311](https://maedler.in/product/splined-hub-din-14-kn-42x48-length-70mm-diameter-80mm-stainless-steel-1-4305-sku-64899311/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 42X48 length 70mm diameter 65mm stainless steel 1.4305 SKU: 64899310](https://maedler.in/product/splined-hub-din-14-kn-42x48-length-70mm-diameter-65mm-stainless-steel-1-4305-sku-64899310/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 28X34 length 60mm diameter 60mm stainless steel 1.4305 SKU: 64899309](https://maedler.in/product/splined-hub-din-14-kn-28x34-length-60mm-diameter-60mm-stainless-steel-1-4305-sku-64899309/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 32X38 length 60mm diameter 60mm stainless steel 1.4305 SKU: 64899308](https://maedler.in/product/splined-hub-din-14-kn-32x38-length-60mm-diameter-60mm-stainless-steel-1-4305-sku-64899308/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 26X32 length 60mm diameter 52mm stainless steel 1.4305 SKU: 64899307](https://maedler.in/product/splined-hub-din-14-kn-26x32-length-60mm-diameter-52mm-stainless-steel-1-4305-sku-64899307/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 21X25 length 55mm diameter 40mm stainless steel 1.4305 SKU: 64899306](https://maedler.in/product/splined-hub-din-14-kn-21x25-length-55mm-diameter-40mm-stainless-steel-1-4305-sku-64899306/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 16X20 length 45mm diameter 32mm stainless steel 1.4305 SKU: 64899305](https://maedler.in/product/splined-hub-din-14-kn-16x20-length-45mm-diameter-32mm-stainless-steel-1-4305-sku-64899305/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 13X16 length 45mm diameter 28mm stainless steel 1.4305 SKU: 64899304](https://maedler.in/product/splined-hub-din-14-kn-13x16-length-45mm-diameter-28mm-stainless-steel-1-4305-sku-64899304/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 23X28 length 55mm diameter 50mm stainless steel 1.4305 SKU: 64899303](https://maedler.in/product/splined-hub-din-14-kn-23x28-length-55mm-diameter-50mm-stainless-steel-1-4305-sku-64899303/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 11X14 length 40mm diameter 20mm stainless steel 1.4305 SKU: 64899302](https://maedler.in/product/splined-hub-din-14-kn-11x14-length-40mm-diameter-20mm-stainless-steel-1-4305-sku-64899302/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Splined hub DIN 14 KN 18X22 length 50mm diameter 40mm stainless steel 1.4305 SKU: 64899301](https://maedler.in/product/splined-hub-din-14-kn-18x22-length-50mm-diameter-40mm-stainless-steel-1-4305-sku-64899301/): Material: Stainless steel 1.4305 (AISI 303). A/d up to size 18 x 22 = 0,15 mm, above 0,2 mm - [Clamp collar single split material steel C45 with profile DIN 14 KN 36 x 42 SKU: 64868200](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-36-x-42-sku-64868200/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 42 x 48 SKU: 64868000](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-42-x-48-sku-64868000/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 28 x 34 SKU: 64867900](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-28-x-34-sku-64867900/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 32 x 38 SKU: 64867800](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-32-x-38-sku-64867800/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 26 x 32 SKU: 64867700](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-26-x-32-sku-64867700/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 21 x 25 SKU: 64867600](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-21-x-25-sku-64867600/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 16 x 20 SKU: 64867500](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-16-x-20-sku-64867500/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 13 x 16 SKU: 64867400](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-13-x-16-sku-64867400/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 23 x 28 SKU: 64867300](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-23-x-28-sku-64867300/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 11 x 14 SKU: 64867200](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-11-x-14-sku-64867200/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar single split material steel C45 with profile DIN 14 KN 18 x 22 SKU: 64867100](https://maedler.in/product/clamp-collar-single-split-material-steel-c45-with-profile-din-14-kn-18-x-22-sku-64867100/): Material: Steel C45, screw strength 12.9, zinc-plated.Single-split clamp collars, as end-stops on spline shafts.These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.Version 2: with additional nut, for adjusting the inner diameter and as lock nut.Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar for splined hub DIN 14 KN 46x54 diameter 100mm red brass Rg7 SKU: 64866400](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-46x54-diameter-100mm-red-brass-rg7-sku-64866400/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 36x42 diameter 90mm red brass Rg7 SKU: 64866200](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-36x42-diameter-90mm-red-brass-rg7-sku-64866200/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 42x48 diameter 95mm red brass Rg7 SKU: 64866000](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-42x48-diameter-95mm-red-brass-rg7-sku-64866000/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 28x34 diameter 78mm red brass Rg7 SKU: 64865900](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-28x34-diameter-78mm-red-brass-rg7-sku-64865900/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 32x38 diameter 80mm red brass Rg7 SKU: 64865800](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-32x38-diameter-80mm-red-brass-rg7-sku-64865800/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 26x32 diameter 70mm red brass Rg7 SKU: 64865700](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-26x32-diameter-70mm-red-brass-rg7-sku-64865700/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 21x25 diameter 62mm red brass Rg7 SKU: 64865600](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-21x25-diameter-62mm-red-brass-rg7-sku-64865600/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 16x20 diameter 52mm red brass Rg7 SKU: 64865500](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-16x20-diameter-52mm-red-brass-rg7-sku-64865500/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 13x16 diameter 50mm red brass Rg7 SKU: 64865400](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-13x16-diameter-50mm-red-brass-rg7-sku-64865400/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 23x28 diameter 64mm red brass Rg7 SKU: 64865300](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-23x28-diameter-64mm-red-brass-rg7-sku-64865300/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 11x14 diameter 42mm red brass Rg7 SKU: 64865200](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-11x14-diameter-42mm-red-brass-rg7-sku-64865200/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [Clamp collar for splined hub DIN 14 KN 18x22 diameter 54mm red brass Rg7 SKU: 64865100](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-18x22-diameter-54mm-red-brass-rg7-sku-64865100/): Material: Red brass (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05 - [clamp collar single split material Aluminium with profile DIN 14 KN 36 x 42 SKU: 64863200](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-36-x-42-sku-64863200/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 42 x 48 SKU: 64863000](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-42-x-48-sku-64863000/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 28 x 34 SKU: 64862900](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-28-x-34-sku-64862900/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 32 x 38 SKU: 64862800](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-32-x-38-sku-64862800/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 26 x 32 SKU: 64862700](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-26-x-32-sku-64862700/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 21 x 25 SKU: 64862600](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-21-x-25-sku-64862600/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 16 x 20 SKU: 64862500](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-16-x-20-sku-64862500/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 13 x 16 SKU: 64862400](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-13-x-16-sku-64862400/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 23 x 28 SKU: 64862300](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-23-x-28-sku-64862300/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 11 x 14 SKU: 64862200](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-11-x-14-sku-64862200/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [clamp collar single split material Aluminium with profile DIN 14 KN 18 x 22 SKU: 64862100](https://maedler.in/product/clamp-collar-single-split-material-aluminium-with-profile-din-14-kn-18-x-22-sku-64862100/): Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C. - [Clamp collar for splined hub DIN 14 KN 46X54 diameter 100mm steel C45 SKU: 64861400](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-46x54-diameter-100mm-steel-c45-sku-64861400/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 36x42 diameter 90mm steel C45 SKU: 64861200](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-36x42-diameter-90mm-steel-c45-sku-64861200/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 42x48 diameter 95mm steel C45 SKU: 64861000](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-42x48-diameter-95mm-steel-c45-sku-64861000/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 28x34 diameter 78mm steel C45Pb SKU: 64860900](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-28x34-diameter-78mm-steel-c45pb-sku-64860900/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 32x38 diameter 80mm steel C45Pb SKU: 64860800](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-32x38-diameter-80mm-steel-c45pb-sku-64860800/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 26x32 diameter 70mm steel C45Pb SKU: 64860700](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-26x32-diameter-70mm-steel-c45pb-sku-64860700/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 21x25 diameter 62mm steel C45Pb SKU: 64860600](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-21x25-diameter-62mm-steel-c45pb-sku-64860600/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 16x20 diameter 52mm steel C45Pb SKU: 64860500](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-16x20-diameter-52mm-steel-c45pb-sku-64860500/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 13x16 diameter 50mm steel C45Pb SKU: 64860400](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-13x16-diameter-50mm-steel-c45pb-sku-64860400/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 23x28 diameter 64mm steel C45Pb SKU: 64860300](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-23x28-diameter-64mm-steel-c45pb-sku-64860300/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 11x14 diameter 42mm steel C45Pb SKU: 64860200](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-11x14-diameter-42mm-steel-c45pb-sku-64860200/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Clamp collar for splined hub DIN 14 KN 18x22 diameter 54mm steel C45Pb SKU: 64860100](https://maedler.in/product/clamp-collar-for-splined-hub-din-14-kn-18x22-diameter-54mm-steel-c45pb-sku-64860100/): Material: Steel C45Pb, from Ø 70 C45 Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05. - [Splined hub with flange DIN 14 KN 46X54 length 100mm red brass Rg7 SKU: 64856400](https://maedler.in/product/splined-hub-with-flange-din-14-kn-46x54-length-100mm-red-brass-rg7-sku-64856400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 36X42 length 80mm red brass Rg7 SKU: 64856200](https://maedler.in/product/splined-hub-with-flange-din-14-kn-36x42-length-80mm-red-brass-rg7-sku-64856200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 42X48 length 80mm red brass Rg7 SKU: 64856000](https://maedler.in/product/splined-hub-with-flange-din-14-kn-42x48-length-80mm-red-brass-rg7-sku-64856000/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 28X34 length 60mm red brass Rg7 SKU: 64855900](https://maedler.in/product/splined-hub-with-flange-din-14-kn-28x34-length-60mm-red-brass-rg7-sku-64855900/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 32X38 length 60mm red brass Rg7 SKU: 64855800](https://maedler.in/product/splined-hub-with-flange-din-14-kn-32x38-length-60mm-red-brass-rg7-sku-64855800/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 26X32 length 60mm red brass Rg7 SKU: 64855700](https://maedler.in/product/splined-hub-with-flange-din-14-kn-26x32-length-60mm-red-brass-rg7-sku-64855700/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 21X25 length 50mm red brass Rg7 SKU: 64855600](https://maedler.in/product/splined-hub-with-flange-din-14-kn-21x25-length-50mm-red-brass-rg7-sku-64855600/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 16X20 length 40mm red brass Rg7 SKU: 64855500](https://maedler.in/product/splined-hub-with-flange-din-14-kn-16x20-length-40mm-red-brass-rg7-sku-64855500/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 13X16 length 40mm red brass Rg7 SKU: 64855400](https://maedler.in/product/splined-hub-with-flange-din-14-kn-13x16-length-40mm-red-brass-rg7-sku-64855400/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 23X28 length 55mm red brass Rg7 SKU: 64855300](https://maedler.in/product/splined-hub-with-flange-din-14-kn-23x28-length-55mm-red-brass-rg7-sku-64855300/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 11X14 length 35mm red brass Rg7 SKU: 64855200](https://maedler.in/product/splined-hub-with-flange-din-14-kn-11x14-length-35mm-red-brass-rg7-sku-64855200/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 18X22 length 45mm red brass Rg7 SKU: 64855100](https://maedler.in/product/splined-hub-with-flange-din-14-kn-18x22-length-45mm-red-brass-rg7-sku-64855100/): Material: Red brass Rg7 (CuSn7Zn4Pb7-C).Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0.05mm. - [Splined hub with flange DIN 14 KN 46X54 length 100mm steel C45 SKU: 64851400](https://maedler.in/product/splined-hub-with-flange-din-14-kn-46x54-length-100mm-steel-c45-sku-64851400/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 36X42 length 80mm steel C45 SKU: 64851200](https://maedler.in/product/splined-hub-with-flange-din-14-kn-36x42-length-80mm-steel-c45-sku-64851200/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 42X48 length 80mm steel C45 SKU: 64851000](https://maedler.in/product/splined-hub-with-flange-din-14-kn-42x48-length-80mm-steel-c45-sku-64851000/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 28X34 length 60mm steel C45Pb SKU: 64850900](https://maedler.in/product/splined-hub-with-flange-din-14-kn-28x34-length-60mm-steel-c45pb-sku-64850900/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Splined hub with flange DIN 14 KN 32X38 length 60mm steel C45Pb SKU: 64850800](https://maedler.in/product/splined-hub-with-flange-din-14-kn-32x38-length-60mm-steel-c45pb-sku-64850800/): Material: Steel C45Pb, from diametre 70 C45. Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. F/d and C/d = 0,05mm - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=106:1 output speed approx. 13 rpm Md2=38Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455106](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i1061-output-speed-approx-13-rpm-md238nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=89:1 output speed approx. 16 rpm Md2=34Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455089](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i891-output-speed-approx-16-rpm-md234nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=71:1 output speed approx. 20 rpm Md2=29Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455071](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i711-output-speed-approx-20-rpm-md229nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=59:1 output speed approx. 24 rpm Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455059](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i591-output-speed-approx-24-rpm-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=41:1 output speed approx. 34 rpm Md2=19Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455041](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i411-output-speed-approx-34-rpm-md219nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=30:1 output speed approx. 47 rpm Md2=14Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455030](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i301-output-speed-approx-47-rpm-md214nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=15:1 output speed approx. 95 rpm Md2=7.2Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455015](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i151-output-speed-approx-95-rpm-md27-2nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=500:1 output speed approx. 5.6 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451500](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i5001-output-speed-approx-5-6-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websi/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=375:1 output speed approx. 7.5 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451375](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i3751-output-speed-approx-7-5-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websi/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=190:1 output speed approx. 15 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451190](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i1901-output-speed-approx-15-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=150:1 output speed approx. 19 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451150](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i1501-output-speed-approx-19-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=120:1 output speed approx. 23 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451120](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i1201-output-speed-approx-23-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=100:1 output speed approx. 28 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451100](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i1001-output-speed-approx-28-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=90:1 output speed approx. 31 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451090](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i901-output-speed-approx-31-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=60:1 output speed approx. 47 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451060](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i601-output-speed-approx-47-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=35:1 output speed approx. 80 rpm Md2=11Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451035](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i351-output-speed-approx-80-rpm-md211nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 112 rpm Md2=8.0Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451025](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i251-output-speed-approx-112-rpm-md28-0nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=21:1 output speed approx. 131 rpm Md2=6.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451021](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i211-output-speed-approx-131-rpm-md26-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 120 Watt 230/400V 50Hz IE2 i=12.5:1 output speed approx. 224 rpm Md2=4.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43451012](https://maedler.in/product/helical-worm-geared-motor-srm-120-watt-230-400v-50hz-ie2-i12-51-output-speed-approx-224-rpm-md24-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=500:1 output speed approx. 2.8 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450500](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i5001-output-speed-approx-2-8-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=375:1 output speed approx. 3.7 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450375](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i3751-output-speed-approx-3-7-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=190:1 output speed approx. 7.4 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450190](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i1901-output-speed-approx-7-4-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=150:1 output speed approx. 9.3 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450150](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i1501-output-speed-approx-9-3-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=120:1 output speed approx. 12 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450120](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i1201-output-speed-approx-12-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450100](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=90:1 output speed approx. 16 rpm permitted Md2=25Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450090](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i901-output-speed-approx-16-rpm-permitted-md225nm-for-operating-instructions-please-visit-the-download-area-of-our-website/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=60:1 output speed approx. 23 rpm Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450060](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i601-output-speed-approx-23-rpm-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=35:1 output speed approx. 40 rpm Md2=16Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450035](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i351-output-speed-approx-40-rpm-md216nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=25:1 output speed approx. 56 rpm Md2=12Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450025](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i251-output-speed-approx-56-rpm-md212nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=21:1 output speed approx. 65 rpm Md2=10Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450021](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i211-output-speed-approx-65-rpm-md210nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedle/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRM 90 Watt 230/400V 50Hz IE1 i=12.5:1 output speed approx. 112 rpm Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43450012](https://maedler.in/product/helical-worm-geared-motor-srm-90-watt-230-400v-50hz-ie1-i12-51-output-speed-approx-112-rpm-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and grounded Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=2500:1 output speed approx. 1.1 rpm permitted Md2=72Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413998](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i25001-output-speed-approx-1-1-rpm-permitted-md272nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=1520:1 output speed approx. 1.8 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413994](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i15201-output-speed-approx-1-8-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=1050:1 output speed approx. 2.7 rpm permitted Md2=113Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413986](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i10501-output-speed-approx-2-7-rpm-permitted-md2113nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413750](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i7501-output-speed-approx-3-7-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=570:1 output speed approx. 4.9 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413570](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i5701-output-speed-approx-4-9-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=450:1 output speed approx. 6.2 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413450](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i4501-output-speed-approx-6-2-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=360:1 output speed approx. 7.8 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413360](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i3601-output-speed-approx-7-8-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=276:1 output speed approx. 10 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413276](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i2761-output-speed-approx-10-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=225:1 output speed approx. 12 rpm Md2=83Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413225](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i2251-output-speed-approx-12-rpm-md283nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=150:1 output speed approx. 19 rpm Md2=57Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413150](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i1501-output-speed-approx-19-rpm-md257nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=105:1 output speed approx. 27 rpm Md2=45Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413105](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i1051-output-speed-approx-27-rpm-md245nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 250 Watt 230/400V 50Hz IE2 i=70:1 output speed approx. 40 rpm Md2=34Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43413070](https://maedler.in/product/worm-geared-motor-rs-250-watt-230-400v-50hz-ie2-i701-output-speed-approx-40-rpm-md234nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=2500:1 output speed approx. 0.6 rpm permitted Md2=72Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412998](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i25001-output-speed-approx-0-6-rpm-permitted-md272nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=1520:1 output speed approx. 0.9 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412994](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i15201-output-speed-approx-0-9-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=1050:1 output speed approx. 1.3 rpm permitted Md2=113Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412986](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i10501-output-speed-approx-1-3-rpm-permitted-md2113nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 1.9 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412750](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i7501-output-speed-approx-1-9-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=570:1 output speed approx. 2.5 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412570](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i5701-output-speed-approx-2-5-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=450:1 output speed approx. 3.1 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412450](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i4501-output-speed-approx-3-1-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=360:1 output speed approx. 3.9 rpm permitted Md2=93Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412360](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i3601-output-speed-approx-3-9-rpm-permitted-md293nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=276:1 output speed approx. 5.1 rpm permitted Md2=81Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412276](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i2761-output-speed-approx-5-1-rpm-permitted-md281nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=225:1 output speed approx. 6.2 rpm permitted Md2=90Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412225](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i2251-output-speed-approx-6-2-rpm-permitted-md290nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=150:1 output speed approx. 9.3 rpm Md2=73Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412150](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i1501-output-speed-approx-9-3-rpm-md273nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=105:1 output speed approx. 13 rpm Md2=58Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412105](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i1051-output-speed-approx-13-rpm-md258nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RS 180 Watt 230/400V 50Hz IE2 i=70:1 output speed approx. 20 rpm Md2=46Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43412070](https://maedler.in/product/worm-geared-motor-rs-180-watt-230-400v-50hz-ie2-i701-output-speed-approx-20-rpm-md246nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=2250:1 output speed approx. 1.2 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409996](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i22501-output-speed-approx-1-2-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=1500:1 output speed approx. 1.9 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409992](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i15001-output-speed-approx-1-9-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=1140:1 output speed approx. 2.5 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409988](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i11401-output-speed-approx-2-5-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409750](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i7501-output-speed-approx-3-7-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=500:1 output speed approx. 5.6 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409500](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i5001-output-speed-approx-5-6-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=380:1 output speed approx. 7.4 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409380](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i3801-output-speed-approx-7-4-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=300:1 output speed approx. 9.3 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409300](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i3001-output-speed-approx-9-3-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=200:1 output speed approx. 14 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409200](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i2001-output-speed-approx-14-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=100:1 output speed approx. 28 rpm Md2=23Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409100](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i1001-output-speed-approx-28-rpm-md223nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-s/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 120 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 56 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43409050](https://maedler.in/product/worm-geared-motor-rm-120-watt-230-400v-50hz-ie2-i501-output-speed-approx-56-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=2250:1 output speed approx. 0.6 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408996](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i22501-output-speed-approx-0-6-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=1500:1 output speed approx. 0.9 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408992](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i15001-output-speed-approx-0-9-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=1140:1 output speed approx. 1.2 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408988](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i11401-output-speed-approx-1-2-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=750:1 output speed approx. 1.9 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408750](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i7501-output-speed-approx-1-9-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=500:1 output speed approx. 2.8 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408500](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i5001-output-speed-approx-2-8-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=380:1 output speed approx. 3.7 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408380](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i3801-output-speed-approx-3-7-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=300:1 output speed approx. 4.7 rpm permitted Md2=36Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408300](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i3001-output-speed-approx-4-7-rpm-permitted-md236nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=200:1 output speed approx. 7 rpm permitted Md2=35Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408200](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i2001-output-speed-approx-7-rpm-permitted-md235nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm Md2=32Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408100](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-md232nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sk/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RM 90 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm Md2=18Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43408050](https://maedler.in/product/worm-geared-motor-rm-90-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-md218nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=1500:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406992](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i15001-output-speed-approx-1-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=1250:1 output speed approx. 2.2 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406990](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i12501-output-speed-approx-2-2-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406750](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i7501-output-speed-approx-3-7-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=400:1 output speed approx. 7 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406400](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i4001-output-speed-approx-7-rpm-permitted-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=250:1 output speed approx. 11 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406250](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i2501-output-speed-approx-11-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=125:1 output speed approx. 22 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406125](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i1251-output-speed-approx-22-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=100:1 output speed approx. 28 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406100](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i1001-output-speed-approx-28-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=70:1 output speed approx. 40 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406070](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i701-output-speed-approx-40-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=50:1 output speed approx. 56 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406050](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i501-output-speed-approx-56-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=25:1 output speed approx. 112 rpm Md2=6.6Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406025](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i251-output-speed-approx-112-rpm-md26-6nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=12.5:1 output speed approx. 224 rpm Md2=3.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43406012](https://maedler.in/product/worm-geared-motor-rl-120-watt-230-400v-50hz-ie2-i12-51-output-speed-approx-224-rpm-md23-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=1500:1 output speed approx. 0.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405992](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i15001-output-speed-approx-0-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=1250:1 output speed approx. 1.1 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405990](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i12501-output-speed-approx-1-1-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=750:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405750](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i7501-output-speed-approx-1-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=400:1 output speed approx. 3.5 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405400](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i4001-output-speed-approx-3-5-rpm-permitted-md27-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=250:1 output speed approx. 5.6 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405250](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i2501-output-speed-approx-5-6-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=125:1 output speed approx. 11 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405125](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i1251-output-speed-approx-11-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=100:1 output speed approx. 14 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405100](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i1001-output-speed-approx-14-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=70:1 output speed approx. 20 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405070](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i701-output-speed-approx-20-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=50:1 output speed approx. 28 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405050](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i501-output-speed-approx-28-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=25:1 output speed approx. 56 rpm permitted Md2=7 8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405025](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i251-output-speed-approx-56-rpm-permitted-md27-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-ma/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor RL 90 Watt 230/400V 50Hz IE1 i=12.5:1 output speed approx. 112 rpm Md2=4.8Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43405012](https://maedler.in/product/worm-geared-motor-rl-90-watt-230-400v-50hz-ie1-i12-51-output-speed-approx-112-rpm-md24-8nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearings. Worms hardened and ground. Worm gears made from special brass. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=1500:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403992](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i15001-output-speed-approx-1-9-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=1250:1 output speed approx. 2.2 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403990](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i12501-output-speed-approx-2-2-rpm-permitted-md26-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Worm geared motor MZ 120 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43403750](https://maedler.in/product/worm-geared-motor-mz-120-watt-230-400v-50hz-ie2-i7501-output-speed-approx-3-7-rpm-permitted-md27-1nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-m/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor.Motor and gearbox with roller bearing. Worms hardened and ground. Worm gears made from special bronze. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781828](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781828/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781825](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781825/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781742](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781742/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781740](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781740/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781738](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781738/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781735](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781735/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781732](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781732/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781730](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781730/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781728](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781728/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781725](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781725/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781640](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781640/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781638](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781638/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781635](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781635/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781632](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781632/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781630](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781630/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781628](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781628/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781625](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781625/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781624](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781624/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781622](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781622/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781620](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781620/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 16 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781619](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-16-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781619/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781540](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781540/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781538](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781538/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781535](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781532](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781530](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781528](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781525](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781524](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781524/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781522](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781522/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781520](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781520/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 15 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781519](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-15-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781519/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781440](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781440/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781438](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781438/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781435](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781435/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781432](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781430](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781428](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781425](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781424](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781424/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781422](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781422/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781420](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781419](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781338](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781338/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781335](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781335/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781332](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781330](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781328](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781325](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781324](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781324/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781322](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781322/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781320](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781320/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 13 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781319](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-13-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781319/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781235](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781235/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781232](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781230](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781228](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781225](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781224](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781224/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 22H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781222](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-22h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781222/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781220](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781220/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 12 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781219](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-12-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781219/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781132](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781132/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781130](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781128](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781125](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781124](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781124/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781120](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781120/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 11 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781119](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-11-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781119/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781032](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781032/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781030](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781028](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781025](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 24H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781024](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-24h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781024/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781020](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781020/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 10 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781019](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-10-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781019/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRTG 12 B-1 3/4x7/16" 30 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778130](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 28 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778128](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 27 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778127](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 26 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778126](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 25 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778125](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 24 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778124](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 23 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778123](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 22 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778122](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 21 teeth material steel teeth hardened for taper bush type 2517 SKU: 10778121](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10778121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 20 teeth material steel teeth hardened for taper bush type 2012 SKU: 10778120](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10778120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 19 teeth material steel teeth hardened for taper bush type 2012 SKU: 10778119](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10778119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 18 teeth material steel teeth hardened for taper bush type 2012 SKU: 10778118](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10778118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 17 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778117](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 16 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778116](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 15 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778115](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 14 teeth material steel teeth hardened for taper bush type 1610 SKU: 10778114](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-14-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10778114/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 12 B-1 3/4x7/16" 13 teeth material steel teeth hardened for taper bush type 1210 SKU: 10778113](https://maedler.in/product/sprocket-krtg-12-b-1-3-4x7-16-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-1210-sku-10778113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 95 teeth material cast iron for taper bush type 2525 SKU: 10777188G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-2525-sku-10777188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 95 teeth material cast iron for taper bush type 2517 SKU: 10777183G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-95-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 76 teeth material cast iron for taper bush type 2517 SKU: 10777176G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-76-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 57 teeth material cast iron for taper bush type 2517 SKU: 10777157G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-57-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 57 teeth material steel for taper bush type 2517 SKU: 10777157](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-57-teeth-material-steel-for-taper-bush-type-2517-sku-10777157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 45 teeth material cast iron for taper bush type 2517 SKU: 10777145G](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-45-teeth-material-cast-iron-for-taper-bush-type-2517-sku-10777145g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 12 B-1 3/4x7/16" 45 teeth material steel for taper bush type 2517 SKU: 10777145](https://maedler.in/product/sprocket-krt-12-b-1-3-4x7-16-45-teeth-material-steel-for-taper-bush-type-2517-sku-10777145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Slide set DZ 3832 TR slide length 350mm zinc plated SKU: 64901335](https://maedler.in/product/slide-set-dz-3832-tr-slide-length-350mm-zinc-plated-sku-64901335/): Material: Slide elements: Cold rolled steel, either zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Operation by pressing on the drawer (Grip or knob not required). Fast disconnect. Hold-in in the closed position. Setting cams for drawer (3.1 mm). Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. Type TR: Required compressive force approx. 50 N. Model either bright zinc-plated, black passivated or white coated. Alternative: Type 3832 HDTR, required force approx. 80 N. Note Recommended fastening: M4 screw. use all mounting positions. The drawer may not be wider than the slide lenght. Horizontal mounting is not possible. Ordering details: e.g.: Product no. 649 013 30, Slides 3832 TR - [Slide set DZ 3832 TR slide length 300mm zinc plated SKU: 64901330](https://maedler.in/product/slide-set-dz-3832-tr-slide-length-300mm-zinc-plated-sku-64901330/): Material: Slide elements: Cold rolled steel, either zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Operation by pressing on the drawer (Grip or knob not required). Fast disconnect. Hold-in in the closed position. Setting cams for drawer (3.1 mm). Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. Type TR: Required compressive force approx. 50 N. Model either bright zinc-plated, black passivated or white coated. Alternative: Type 3832 HDTR, required force approx. 80 N. Note Recommended fastening: M4 screw. use all mounting positions. The drawer may not be wider than the slide lenght. Horizontal mounting is not possible. Ordering details: e.g.: Product no. 649 013 30, Slides 3832 TR - [Slide set DZ 3832 slide length 700mm zinc plated SKU: 64901270](https://maedler.in/product/slide-set-dz-3832-slide-length-700mm-zinc-plated-sku-64901270/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 650mm zinc plated SKU: 64901265](https://maedler.in/product/slide-set-dz-3832-slide-length-650mm-zinc-plated-sku-64901265/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 600mm zinc plated SKU: 64901260](https://maedler.in/product/slide-set-dz-3832-slide-length-600mm-zinc-plated-sku-64901260/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 550mm zinc plated SKU: 64901255](https://maedler.in/product/slide-set-dz-3832-slide-length-550mm-zinc-plated-sku-64901255/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 500mm zinc plated SKU: 64901250](https://maedler.in/product/slide-set-dz-3832-slide-length-500mm-zinc-plated-sku-64901250/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 450mm zinc plated SKU: 64901245](https://maedler.in/product/slide-set-dz-3832-slide-length-450mm-zinc-plated-sku-64901245/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 400mm zinc plated SKU: 64901240](https://maedler.in/product/slide-set-dz-3832-slide-length-400mm-zinc-plated-sku-64901240/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 350mm zinc plated SKU: 64901235](https://maedler.in/product/slide-set-dz-3832-slide-length-350mm-zinc-plated-sku-64901235/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 300mm zinc plated SKU: 64901230](https://maedler.in/product/slide-set-dz-3832-slide-length-300mm-zinc-plated-sku-64901230/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 250mm zinc plated SKU: 64901225](https://maedler.in/product/slide-set-dz-3832-slide-length-250mm-zinc-plated-sku-64901225/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 199mm zinc plated SKU: 64901220](https://maedler.in/product/slide-set-dz-3832-slide-length-199mm-zinc-plated-sku-64901220/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 slide length 148mm zinc plated SKU: 64901215](https://maedler.in/product/slide-set-dz-3832-slide-length-148mm-zinc-plated-sku-64901215/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 2132 slide length 700mm zinc plated SKU: 64901070](https://maedler.in/product/slide-set-dz-2132-slide-length-700mm-zinc-plated-sku-64901070/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2132 slide length 650mm zinc plated SKU: 64901065](https://maedler.in/product/slide-set-dz-2132-slide-length-650mm-zinc-plated-sku-64901065/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2132 slide length 600mm zinc plated SKU: 64901060](https://maedler.in/product/slide-set-dz-2132-slide-length-600mm-zinc-plated-sku-64901060/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2132 slide length 550mm zinc plated SKU: 64901055](https://maedler.in/product/slide-set-dz-2132-slide-length-550mm-zinc-plated-sku-64901055/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2132 slide length 500mm zinc plated SKU: 64901050](https://maedler.in/product/slide-set-dz-2132-slide-length-500mm-zinc-plated-sku-64901050/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2132 slide length 450mm zinc plated SKU: 64901045](https://maedler.in/product/slide-set-dz-2132-slide-length-450mm-zinc-plated-sku-64901045/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2132 slide length 400mm zinc plated SKU: 64901040](https://maedler.in/product/slide-set-dz-2132-slide-length-400mm-zinc-plated-sku-64901040/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2132 slide length 350mm zinc plated SKU: 64901035](https://maedler.in/product/slide-set-dz-2132-slide-length-350mm-zinc-plated-sku-64901035/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2132 slide length 300mm zinc plated SKU: 64901030](https://maedler.in/product/slide-set-dz-2132-slide-length-300mm-zinc-plated-sku-64901030/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2132 slide length 250mm zinc plated SKU: 64901025](https://maedler.in/product/slide-set-dz-2132-slide-length-250mm-zinc-plated-sku-64901025/): Material: Slide elements: Cold rolled steel, zinc-plated and bright passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version bright zinc-plated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3732 slide length 650mm zinc plated SKU: 64900965](https://maedler.in/product/slide-set-dz-3732-slide-length-650mm-zinc-plated-sku-64900965/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Very high service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw (included in delivery).Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3732 slide length 600mm zinc plated SKU: 64900960](https://maedler.in/product/slide-set-dz-3732-slide-length-600mm-zinc-plated-sku-64900960/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Very high service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw (included in delivery).Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3732 slide length 550mm zinc plated SKU: 64900955](https://maedler.in/product/slide-set-dz-3732-slide-length-550mm-zinc-plated-sku-64900955/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Very high service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw (included in delivery).Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3732 slide length 500mm zinc plated SKU: 64900950](https://maedler.in/product/slide-set-dz-3732-slide-length-500mm-zinc-plated-sku-64900950/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Very high service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw (included in delivery).Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3732 slide length 450mm zinc plated SKU: 64900945](https://maedler.in/product/slide-set-dz-3732-slide-length-450mm-zinc-plated-sku-64900945/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Very high service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw (included in delivery).Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3732 slide length 400mm zinc plated SKU: 64900940](https://maedler.in/product/slide-set-dz-3732-slide-length-400mm-zinc-plated-sku-64900940/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Very high service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw (included in delivery).Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3732 slide length 350mm zinc plated SKU: 64900935](https://maedler.in/product/slide-set-dz-3732-slide-length-350mm-zinc-plated-sku-64900935/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Very high service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw (included in delivery).Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3732 slide length 300mm zinc plated SKU: 64900930](https://maedler.in/product/slide-set-dz-3732-slide-length-300mm-zinc-plated-sku-64900930/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Very high service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw (included in delivery).Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 2642 slide length 550mm zinc plated SKU: 64900855](https://maedler.in/product/slide-set-dz-2642-slide-length-550mm-zinc-plated-sku-64900855/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide height. Slot or side mounting possible. Hold-in in closed position. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2mm/ Ø7.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2642 slide length 500mm zinc plated SKU: 64900850](https://maedler.in/product/slide-set-dz-2642-slide-length-500mm-zinc-plated-sku-64900850/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide height. Slot or side mounting possible. Hold-in in closed position. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2mm/ Ø7.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2642 slide length 450mm zinc plated SKU: 64900845](https://maedler.in/product/slide-set-dz-2642-slide-length-450mm-zinc-plated-sku-64900845/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide height. Slot or side mounting possible. Hold-in in closed position. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2mm/ Ø7.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2642 slide length 400mm zinc plated SKU: 64900840](https://maedler.in/product/slide-set-dz-2642-slide-length-400mm-zinc-plated-sku-64900840/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide height. Slot or side mounting possible. Hold-in in closed position. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2mm/ Ø7.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2642 slide length 350mm zinc plated SKU: 64900835](https://maedler.in/product/slide-set-dz-2642-slide-length-350mm-zinc-plated-sku-64900835/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide height. Slot or side mounting possible. Hold-in in closed position. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2mm/ Ø7.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2642 slide length 300mm zinc plated SKU: 64900830](https://maedler.in/product/slide-set-dz-2642-slide-length-300mm-zinc-plated-sku-64900830/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide height. Slot or side mounting possible. Hold-in in closed position. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2mm/ Ø7.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2642 slide length 250mm zinc plated SKU: 64900825](https://maedler.in/product/slide-set-dz-2642-slide-length-250mm-zinc-plated-sku-64900825/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide height. Slot or side mounting possible. Hold-in in closed position. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2mm/ Ø7.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2642 slide length 200mm zinc plated SKU: 64900820](https://maedler.in/product/slide-set-dz-2642-slide-length-200mm-zinc-plated-sku-64900820/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide height. Slot or side mounting possible. Hold-in in closed position. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2mm/ Ø7.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2601 slide length 550mm zinc plated SKU: 64900655](https://maedler.in/product/slide-set-dz-2601-slide-length-550mm-zinc-plated-sku-64900655/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Very compact profile (26.3 x 12.7 mm). Universal hole pattern. Noise dampening of all end stops. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteFixing recommendations: M4 screw/6mm Euro screw/4 mm wood screw.Max. head. height 2 mm/Ø 7.8 mm. Horizontal mounting is not recommended.Use all mounting positions to achieve the max. load ratin - [Slide set DZ 2601 slide length 500mm zinc plated SKU: 64900650](https://maedler.in/product/slide-set-dz-2601-slide-length-500mm-zinc-plated-sku-64900650/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Very compact profile (26.3 x 12.7 mm). Universal hole pattern. Noise dampening of all end stops. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteFixing recommendations: M4 screw/6mm Euro screw/4 mm wood screw.Max. head. height 2 mm/Ø 7.8 mm. Horizontal mounting is not recommended.Use all mounting positions to achieve the max. load ratin - [Slide set DZ 2601 slide length 450mm zinc plated SKU: 64900645](https://maedler.in/product/slide-set-dz-2601-slide-length-450mm-zinc-plated-sku-64900645/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Very compact profile (26.3 x 12.7 mm). Universal hole pattern. Noise dampening of all end stops. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteFixing recommendations: M4 screw/6mm Euro screw/4 mm wood screw.Max. head. height 2 mm/Ø 7.8 mm. Horizontal mounting is not recommended.Use all mounting positions to achieve the max. load ratin - [Slide set DZ 2601 slide length 400mm zinc plated SKU: 64900640](https://maedler.in/product/slide-set-dz-2601-slide-length-400mm-zinc-plated-sku-64900640/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Very compact profile (26.3 x 12.7 mm). Universal hole pattern. Noise dampening of all end stops. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteFixing recommendations: M4 screw/6mm Euro screw/4 mm wood screw.Max. head. height 2 mm/Ø 7.8 mm. Horizontal mounting is not recommended.Use all mounting positions to achieve the max. load ratin - [Slide set DZ 2601 slide length 350mm zinc plated SKU: 64900635](https://maedler.in/product/slide-set-dz-2601-slide-length-350mm-zinc-plated-sku-64900635/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Very compact profile (26.3 x 12.7 mm). Universal hole pattern. Noise dampening of all end stops. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteFixing recommendations: M4 screw/6mm Euro screw/4 mm wood screw.Max. head. height 2 mm/Ø 7.8 mm. Horizontal mounting is not recommended.Use all mounting positions to achieve the max. load ratin - [Slide set DZ 2601 slide length 300mm zinc plated SKU: 64900630](https://maedler.in/product/slide-set-dz-2601-slide-length-300mm-zinc-plated-sku-64900630/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Very compact profile (26.3 x 12.7 mm). Universal hole pattern. Noise dampening of all end stops. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteFixing recommendations: M4 screw/6mm Euro screw/4 mm wood screw.Max. head. height 2 mm/Ø 7.8 mm. Horizontal mounting is not recommended.Use all mounting positions to achieve the max. load ratin - [Slide set DZ 2601 slide length 250mm zinc plated SKU: 64900625](https://maedler.in/product/slide-set-dz-2601-slide-length-250mm-zinc-plated-sku-64900625/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Very compact profile (26.3 x 12.7 mm). Universal hole pattern. Noise dampening of all end stops. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteFixing recommendations: M4 screw/6mm Euro screw/4 mm wood screw.Max. head. height 2 mm/Ø 7.8 mm. Horizontal mounting is not recommended.Use all mounting positions to achieve the max. load ratin - [Slide set DZ 2601 slide length 200mm zinc plated SKU: 64900620](https://maedler.in/product/slide-set-dz-2601-slide-length-200mm-zinc-plated-sku-64900620/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Very compact profile (26.3 x 12.7 mm). Universal hole pattern. Noise dampening of all end stops. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteFixing recommendations: M4 screw/6mm Euro screw/4 mm wood screw.Max. head. height 2 mm/Ø 7.8 mm. Horizontal mounting is not recommended.Use all mounting positions to achieve the max. load ratin - [Slide set DZ 2601 slide length 150mm zinc plated SKU: 64900615](https://maedler.in/product/slide-set-dz-2601-slide-length-150mm-zinc-plated-sku-64900615/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Very compact profile (26.3 x 12.7 mm). Universal hole pattern. Noise dampening of all end stops. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteFixing recommendations: M4 screw/6mm Euro screw/4 mm wood screw.Max. head. height 2 mm/Ø 7.8 mm. Horizontal mounting is not recommended.Use all mounting positions to achieve the max. load ratin - [Slide set DZ 2731 CL slide length 500mm zinc plated SKU: 64900550](https://maedler.in/product/slide-set-dz-2731-cl-slide-length-500mm-zinc-plated-sku-64900550/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low profile: 27mm high. Lock-in in closed position. Front lever lock release. Slide is unhanded. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4/M3 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2731 CL slide length 450mm zinc plated SKU: 64900545](https://maedler.in/product/slide-set-dz-2731-cl-slide-length-450mm-zinc-plated-sku-64900545/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low profile: 27mm high. Lock-in in closed position. Front lever lock release. Slide is unhanded. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4/M3 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2731 CL slide length 400mm zinc plated SKU: 64900540](https://maedler.in/product/slide-set-dz-2731-cl-slide-length-400mm-zinc-plated-sku-64900540/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low profile: 27mm high. Lock-in in closed position. Front lever lock release. Slide is unhanded. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4/M3 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2731 CL slide length 350mm zinc plated SKU: 64900535](https://maedler.in/product/slide-set-dz-2731-cl-slide-length-350mm-zinc-plated-sku-64900535/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low profile: 27mm high. Lock-in in closed position. Front lever lock release. Slide is unhanded. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4/M3 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2731 CL slide length 300mm zinc plated SKU: 64900530](https://maedler.in/product/slide-set-dz-2731-cl-slide-length-300mm-zinc-plated-sku-64900530/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low profile: 27mm high. Lock-in in closed position. Front lever lock release. Slide is unhanded. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4/M3 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2731 CL slide length 250mm zinc plated SKU: 64900525](https://maedler.in/product/slide-set-dz-2731-cl-slide-length-250mm-zinc-plated-sku-64900525/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low profile: 27mm high. Lock-in in closed position. Front lever lock release. Slide is unhanded. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4/M3 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2731 CL slide length 200mm zinc plated SKU: 64900520](https://maedler.in/product/slide-set-dz-2731-cl-slide-length-200mm-zinc-plated-sku-64900520/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low profile: 27mm high. Lock-in in closed position. Front lever lock release. Slide is unhanded. Service life 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4/M3 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2026 slide length 700mm zinc plated SKU: 64900470](https://maedler.in/product/slide-set-dz-2026-slide-length-700mm-zinc-plated-sku-64900470/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-out on both sides. Pulls out to front and back. For applications requiring access from both sides of a sliding unit. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2026 slide length 650mm zinc plated SKU: 64900465](https://maedler.in/product/slide-set-dz-2026-slide-length-650mm-zinc-plated-sku-64900465/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-out on both sides. Pulls out to front and back. For applications requiring access from both sides of a sliding unit. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2026 slide length 600mm zinc plated SKU: 64900460](https://maedler.in/product/slide-set-dz-2026-slide-length-600mm-zinc-plated-sku-64900460/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-out on both sides. Pulls out to front and back. For applications requiring access from both sides of a sliding unit. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2026 slide length 550mm zinc plated SKU: 64900455](https://maedler.in/product/slide-set-dz-2026-slide-length-550mm-zinc-plated-sku-64900455/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-out on both sides. Pulls out to front and back. For applications requiring access from both sides of a sliding unit. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2026 slide length 500mm zinc plated SKU: 64900450](https://maedler.in/product/slide-set-dz-2026-slide-length-500mm-zinc-plated-sku-64900450/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-out on both sides. Pulls out to front and back. For applications requiring access from both sides of a sliding unit. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2026 slide length 450mm zinc plated SKU: 64900445](https://maedler.in/product/slide-set-dz-2026-slide-length-450mm-zinc-plated-sku-64900445/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-out on both sides. Pulls out to front and back. For applications requiring access from both sides of a sliding unit. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2026 slide length 400mm zinc plated SKU: 64900440](https://maedler.in/product/slide-set-dz-2026-slide-length-400mm-zinc-plated-sku-64900440/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-out on both sides. Pulls out to front and back. For applications requiring access from both sides of a sliding unit. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2026 slide length 350mm zinc plated SKU: 64900435](https://maedler.in/product/slide-set-dz-2026-slide-length-350mm-zinc-plated-sku-64900435/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-out on both sides. Pulls out to front and back. For applications requiring access from both sides of a sliding unit. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2026 slide length 300mm zinc plated SKU: 64900430](https://maedler.in/product/slide-set-dz-2026-slide-length-300mm-zinc-plated-sku-64900430/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-out on both sides. Pulls out to front and back. For applications requiring access from both sides of a sliding unit. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2002 slide length 711mm zinc plated SKU: 64900370](https://maedler.in/product/slide-set-dz-2002-slide-length-711mm-zinc-plated-sku-64900370/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics secto Telescopic precision ball bearing slides for applications in the industrial and electronics sector. • Hold-in in the centre position. • Forward and return slide. For applications, that require access from both sides of a sliding unit. • Fasteners included. • High service life 50,000 cycles. • Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 003 30, Slides 2002 - [Slide set DZ 2002 slide length 660mm zinc plated SKU: 64900365](https://maedler.in/product/slide-set-dz-2002-slide-length-660mm-zinc-plated-sku-64900365/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics secto Telescopic precision ball bearing slides for applications in the industrial and electronics sector. • Hold-in in the centre position. • Forward and return slide. For applications, that require access from both sides of a sliding unit. • Fasteners included. • High service life 50,000 cycles. • Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 003 30, Slides 2002 - [Slide set DZ 2002 slide length 610mm zinc plated SKU: 64900360](https://maedler.in/product/slide-set-dz-2002-slide-length-610mm-zinc-plated-sku-64900360/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics secto Telescopic precision ball bearing slides for applications in the industrial and electronics sector. • Hold-in in the centre position. • Forward and return slide. For applications, that require access from both sides of a sliding unit. • Fasteners included. • High service life 50,000 cycles. • Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 003 30, Slides 2002 - [Slide set DZ 2002 slide length 558mm zinc plated SKU: 64900355](https://maedler.in/product/slide-set-dz-2002-slide-length-558mm-zinc-plated-sku-64900355/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics secto Telescopic precision ball bearing slides for applications in the industrial and electronics sector. • Hold-in in the centre position. • Forward and return slide. For applications, that require access from both sides of a sliding unit. • Fasteners included. • High service life 50,000 cycles. • Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 003 30, Slides 2002 - [Slide set DZ 2002 slide length 508mm zinc plated SKU: 64900350](https://maedler.in/product/slide-set-dz-2002-slide-length-508mm-zinc-plated-sku-64900350/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics secto Telescopic precision ball bearing slides for applications in the industrial and electronics sector. • Hold-in in the centre position. • Forward and return slide. For applications, that require access from both sides of a sliding unit. • Fasteners included. • High service life 50,000 cycles. • Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 003 30, Slides 2002 - [Slide set DZ 2002 slide length 457mm zinc plated SKU: 64900345](https://maedler.in/product/slide-set-dz-2002-slide-length-457mm-zinc-plated-sku-64900345/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics secto Telescopic precision ball bearing slides for applications in the industrial and electronics sector. • Hold-in in the centre position. • Forward and return slide. For applications, that require access from both sides of a sliding unit. • Fasteners included. • High service life 50,000 cycles. • Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 003 30, Slides 2002 - [Slide set DZ 2002 slide length 406mm zinc plated SKU: 64900340](https://maedler.in/product/slide-set-dz-2002-slide-length-406mm-zinc-plated-sku-64900340/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics secto Telescopic precision ball bearing slides for applications in the industrial and electronics sector. • Hold-in in the centre position. • Forward and return slide. For applications, that require access from both sides of a sliding unit. • Fasteners included. • High service life 50,000 cycles. • Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 003 30, Slides 2002 - [Slide set DZ 2002 slide length 356mm zinc plated SKU: 64900335](https://maedler.in/product/slide-set-dz-2002-slide-length-356mm-zinc-plated-sku-64900335/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics secto Telescopic precision ball bearing slides for applications in the industrial and electronics sector. • Hold-in in the centre position. • Forward and return slide. For applications, that require access from both sides of a sliding unit. • Fasteners included. • High service life 50,000 cycles. • Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 003 30, Slides 2002 - [Slide set DZ 2002 slide length 305mm zinc plated SKU: 64900330](https://maedler.in/product/slide-set-dz-2002-slide-length-305mm-zinc-plated-sku-64900330/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics secto Telescopic precision ball bearing slides for applications in the industrial and electronics sector. • Hold-in in the centre position. • Forward and return slide. For applications, that require access from both sides of a sliding unit. • Fasteners included. • High service life 50,000 cycles. • Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 003 30, Slides 2002 - [Slide set DZ 0204 slide length 711mm zinc plated SKU: 64900228](https://maedler.in/product/slide-set-dz-0204-slide-length-711mm-zinc-plated-sku-64900228/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0204 slide length 660mm zinc plated SKU: 64900226](https://maedler.in/product/slide-set-dz-0204-slide-length-660mm-zinc-plated-sku-64900226/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0204 slide length 610mm zinc plated SKU: 64900224](https://maedler.in/product/slide-set-dz-0204-slide-length-610mm-zinc-plated-sku-64900224/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0204 slide length 559mm zinc plated SKU: 64900222](https://maedler.in/product/slide-set-dz-0204-slide-length-559mm-zinc-plated-sku-64900222/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0204 slide length 508mm zinc plated SKU: 64900220](https://maedler.in/product/slide-set-dz-0204-slide-length-508mm-zinc-plated-sku-64900220/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0204 slide length 457mm zinc plated SKU: 64900218](https://maedler.in/product/slide-set-dz-0204-slide-length-457mm-zinc-plated-sku-64900218/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0204 slide length 406mm zinc plated SKU: 64900216](https://maedler.in/product/slide-set-dz-0204-slide-length-406mm-zinc-plated-sku-64900216/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0204 slide length 356mm zinc plated SKU: 64900214](https://maedler.in/product/slide-set-dz-0204-slide-length-356mm-zinc-plated-sku-64900214/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0204 slide length 305mm zinc plated SKU: 64900212](https://maedler.in/product/slide-set-dz-0204-slide-length-305mm-zinc-plated-sku-64900212/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Fast disconnection. Lock-out function. Service life 10,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2431 slide length 500mm zinc plated SKU: 64900150](https://maedler.in/product/slide-set-dz-2431-slide-length-500mm-zinc-plated-sku-64900150/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low slide profile (only 20mm). Compact profile. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M3 screw. - [Slide set DZ 2431 slide length 450mm zinc plated SKU: 64900145](https://maedler.in/product/slide-set-dz-2431-slide-length-450mm-zinc-plated-sku-64900145/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low slide profile (only 20mm). Compact profile. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M3 screw. - [Slide set DZ 2431 slide length 400mm zinc plated SKU: 64900140](https://maedler.in/product/slide-set-dz-2431-slide-length-400mm-zinc-plated-sku-64900140/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low slide profile (only 20mm). Compact profile. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M3 screw. - [Slide set DZ 2431 slide length 350mm zinc plated SKU: 64900135](https://maedler.in/product/slide-set-dz-2431-slide-length-350mm-zinc-plated-sku-64900135/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low slide profile (only 20mm). Compact profile. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M3 screw. - [Slide set DZ 2431 slide length 300mm zinc plated SKU: 64900130](https://maedler.in/product/slide-set-dz-2431-slide-length-300mm-zinc-plated-sku-64900130/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low slide profile (only 20mm). Compact profile. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M3 screw. - [Slide set DZ 2431 slide length 250mm zinc plated SKU: 64900125](https://maedler.in/product/slide-set-dz-2431-slide-length-250mm-zinc-plated-sku-64900125/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low slide profile (only 20mm). Compact profile. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M3 screw. - [Slide set DZ 2431 slide length 200mm zinc plated SKU: 64900120](https://maedler.in/product/slide-set-dz-2431-slide-length-200mm-zinc-plated-sku-64900120/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low slide profile (only 20mm). Compact profile. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M3 screw. - [Slide set DZ 2431 slide length 150mm zinc plated SKU: 64900115](https://maedler.in/product/slide-set-dz-2431-slide-length-150mm-zinc-plated-sku-64900115/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Low slide profile (only 20mm). Compact profile. Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M3 screw. - [Slide set DZ 0201 slide length 711.2mm zinc plated SKU: 64900028](https://maedler.in/product/slide-set-dz-0201-slide-length-711-2mm-zinc-plated-sku-64900028/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 0201 slide length 660.4mm zinc plated SKU: 64900026](https://maedler.in/product/slide-set-dz-0201-slide-length-660-4mm-zinc-plated-sku-64900026/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 0201 slide length 609.6mm zinc plated SKU: 64900024](https://maedler.in/product/slide-set-dz-0201-slide-length-609-6mm-zinc-plated-sku-64900024/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 0201 slide length 558.8mm zinc plated SKU: 64900022](https://maedler.in/product/slide-set-dz-0201-slide-length-558-8mm-zinc-plated-sku-64900022/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 0201 slide length 508mm zinc plated SKU: 64900020](https://maedler.in/product/slide-set-dz-0201-slide-length-508mm-zinc-plated-sku-64900020/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 0201 slide length 457.2mm zinc plated SKU: 64900018](https://maedler.in/product/slide-set-dz-0201-slide-length-457-2mm-zinc-plated-sku-64900018/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 0201 slide length 406.4mm zinc plated SKU: 64900016](https://maedler.in/product/slide-set-dz-0201-slide-length-406-4mm-zinc-plated-sku-64900016/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 0201 slide length 355.6mm zinc plated SKU: 64900014](https://maedler.in/product/slide-set-dz-0201-slide-length-355-6mm-zinc-plated-sku-64900014/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 0201 slide length 304.8mm zinc plated SKU: 64900012](https://maedler.in/product/slide-set-dz-0201-slide-length-304-8mm-zinc-plated-sku-64900012/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Can be mounted on both sides. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Control Box GR/I input 230V AC output 24V DC for 1-2 actuators with IEC power cord length 3 m SKU: 47519012](https://maedler.in/product/control-box-gr-i-input-230v-ac-output-24v-dc-for-1-2-actuators-with-iec-power-cord-length-3-m-sku-47519012/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 230V AC output 24V DC for 1 actuator with IEC power cord length 3 m SKU: 47519011](https://maedler.in/product/control-box-gr-i-input-230v-ac-output-24v-dc-for-1-actuator-with-iec-power-cord-length-3-m-sku-47519011/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 1000mm SKU: 47514100](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-1000mm-sku-47514100/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 800mm SKU: 47514080](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-800mm-sku-47514080/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 600mm SKU: 47514060](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-600mm-sku-47514060/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 500mm SKU: 47514050](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-500mm-sku-47514050/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 400mm SKU: 47514040](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-400mm-sku-47514040/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 300mm SKU: 47514030](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-300mm-sku-47514030/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 200mm SKU: 47514020](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-200mm-sku-47514020/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 12mm/s stroke 100mm SKU: 47514010](https://maedler.in/product/actuator-gr-i-speed-12mm-s-stroke-100mm-sku-47514010/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 1000mm SKU: 47513100](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-1000mm-sku-47513100/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 800mm SKU: 47513080](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-800mm-sku-47513080/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 600mm SKU: 47513060](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-600mm-sku-47513060/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 500mm SKU: 47513050](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-500mm-sku-47513050/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 400mm SKU: 47513040](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-400mm-sku-47513040/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 300mm SKU: 47513030](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-300mm-sku-47513030/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 200mm SKU: 47513020](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-200mm-sku-47513020/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Actuator GR/I speed 3mm/s stroke 100mm SKU: 47513010](https://maedler.in/product/actuator-gr-i-speed-3mm-s-stroke-100mm-sku-47513010/): For use with control boxes and hand operators GR/I. For universal usage: For operating windows, gates, ... 2 speeds. 8 stroke lengths, other lengths on request. For control boxes with 24V DC or 230V AC. Motor voltage 24V DC. Protection class IP66. cable length approx. 1,2m With one hand operator, up to 4 actuators can be operated seperately. Synchronisation control on request. Operating mode 10%, max. 2 minutes. Motor end stop switch integrated. Standard: CE / UL 60601-1 / EN60601-1. Permissible ambient operating temperature: -5°C up to +40°C. Actuators, control boxes and hand operators have to be ordered seperately. - [Worm gear screw jack NPK size 4 version C basic gearbox without spindle for spindle KGT 40x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750244005](https://maedler.in/product/worm-gear-screw-jack-npk-size-4-version-c-basic-gearbox-without-spindle-for-spindle-kgt-40x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 4 type C basic gearbox without spindle for spindle Tr.40x7 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502400](https://maedler.in/product/worm-gear-screw-jack-npt-size-4-type-c-basic-gearbox-without-spindle-for-spindle-tr-40x7-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475024/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 3 version C basic gearbox without spindle for spindle KGT 32x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750233205](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-c-basic-gearbox-without-spindle-for-spindle-kgt-32x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPK size 3 version C basic gearbox without spindle for spindle KGT 25x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750232505](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-c-basic-gearbox-without-spindle-for-spindle-kgt-25x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 3 type C basic gearbox without spindle for spindle Tr.30x6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502300](https://maedler.in/product/worm-gear-screw-jack-npt-size-3-type-c-basic-gearbox-without-spindle-for-spindle-tr-30x6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475023/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 2 version C basic gearbox without spindle for spindle KGT 20x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750222005](https://maedler.in/product/worm-gear-screw-jack-npk-size-2-version-c-basic-gearbox-without-spindle-for-spindle-kgt-20x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 2 type C basic gearbox without spindle for spindle Tr.20x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502200](https://maedler.in/product/worm-gear-screw-jack-npt-size-2-type-c-basic-gearbox-without-spindle-for-spindle-tr-20x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475022/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 1 version C basic gearbox without spindle for spindle KGT 16x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750211605](https://maedler.in/product/worm-gear-screw-jack-npk-size-1-version-c-basic-gearbox-without-spindle-for-spindle-kgt-16x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the ball screw nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 1 type C basic gearbox without spindle for spindle Tr.18x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502100](https://maedler.in/product/worm-gear-screw-jack-npt-size-1-type-c-basic-gearbox-without-spindle-for-spindle-tr-18x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475021/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPT size 0 type C basic gearbox without spindle for spindle Tr16x4. (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47502000](https://maedler.in/product/worm-gear-screw-jack-npt-size-0-type-c-basic-gearbox-without-spindle-for-spindle-tr16x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475020/): Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 4 version B basic gearbox without spindle for spindle KGT 40x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750144005](https://maedler.in/product/worm-gear-screw-jack-npk-size-4-version-b-basic-gearbox-without-spindle-for-spindle-kgt-40x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 4 type B basic gearbox without spindle for spindle Tr.40x7 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47501400](https://maedler.in/product/worm-gear-screw-jack-npt-size-4-type-b-basic-gearbox-without-spindle-for-spindle-tr-40x7-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475014/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 3 version B basic gearbox without spindle for spindle KGT 32x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750133205](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-b-basic-gearbox-without-spindle-for-spindle-kgt-32x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPK size 3 version B basic gearbox without spindle for spindle KGT 25x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750132505](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-b-basic-gearbox-without-spindle-for-spindle-kgt-25x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 3 type B basic gearbox without spindle for spindle Tr.30x6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47501300](https://maedler.in/product/worm-gear-screw-jack-npt-size-3-type-b-basic-gearbox-without-spindle-for-spindle-tr-30x6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475013/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 2 version B basic gearbox without spindle for spindle KGT 20x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750122005](https://maedler.in/product/worm-gear-screw-jack-npk-size-2-version-b-basic-gearbox-without-spindle-for-spindle-kgt-20x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 2 type B basic gearbox without spindle for spindle Tr.20x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47501200](https://maedler.in/product/worm-gear-screw-jack-npt-size-2-type-b-basic-gearbox-without-spindle-for-spindle-tr-20x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475012/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 1 version B basic gearbox without spindle for spindle KGT 16x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750111605](https://maedler.in/product/worm-gear-screw-jack-npk-size-1-version-b-basic-gearbox-without-spindle-for-spindle-kgt-16x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPT size 1 type B basic gearbox without spindle for spindle Tr.18x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47501100](https://maedler.in/product/worm-gear-screw-jack-npt-size-1-type-b-basic-gearbox-without-spindle-for-spindle-tr-18x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475011/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPT size 0 type B basic gearbox without spindle for spindle Tr.16x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500600](https://maedler.in/product/worm-gear-screw-jack-npt-size-0-type-b-basic-gearbox-without-spindle-for-spindle-tr-16x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475006/): Version B: Inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Protective sleeve: The versions A and B are, unless stated otherwise in the order, supplied with a protective sleeve. Version B: Is the same as version A, but inside the gear unit a groove secures the spindle over its entire length against twisting. Thus the load can simply be applied. Versions A and B are avaliable with an optional spindle end safety feature. This means the threaded spindle is locked before the safety sleeve is mounted, to limit the stroke in extended position so that the spindle cannot be screwed out of the gear unit. Attention: this safety feature means the safety sleeve is by about 20 mm longer. The product numbers below only refer to the basic gear units without spindle. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. On request a version for lower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Worm gear screw jack NPK size 4 version A basic gearbox without spindle for spindle KGT 40x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750044005](https://maedler.in/product/worm-gear-screw-jack-npk-size-4-version-a-basic-gearbox-without-spindle-for-spindle-kgt-40x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Travelling nut for worm gear screw jack NPT version C size 4 with trapezoidal thread Tr. 40x7 SKU: 47500416](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-4-with-trapezoidal-thread-tr-40x7-sku-47500416/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT and NPK version A and B size 4 outer Ø 110mm M30 SKU: 47500415](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-and-npk-version-a-and-b-size-4-outer-o-110mm-m30-sku-47500415/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT and NPK size 4 bearing inner Ø 35mm SKU: 47500414](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-and-npk-size-4-bearing-inner-o-35mm-sku-47500414/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT and NPK type Z2 size 4 180x145mm pins at long side SKU: 47500413](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z2-size-4-180x145mm-pins-at-long-side-sku-47500413/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT and NPK type Z1 size 4 180x145mm pins at short side SKU: 47500412](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z1-size-4-180x145mm-pins-at-short-side-sku-47500412/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT and NPK size 4 length 230mm SKU: 47500411](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-and-npk-size-4-length-230mm-sku-47500411/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 4 version A basic gearbox without spindle for spindle Tr.40x7 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500400](https://maedler.in/product/worm-gear-screw-jack-npt-size-4-version-a-basic-gearbox-without-spindle-for-spindle-tr-40x7-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Travelling nut for worm gear screw jack NPK version C size 4 with ball thread KGT 40x5 SKU: 475004LM1](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-4-with-ball-thread-kgt-40x5-sku-475004lm1/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Worm gear screw jack NPK size 3 version A basic gearbox without spindle for spindle KGT 32x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750033205](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-a-basic-gearbox-without-spindle-for-spindle-kgt-32x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Worm gear screw jack NPK size 3 version A basic gearbox without spindle for spindle KGT 25x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750032505](https://maedler.in/product/worm-gear-screw-jack-npk-size-3-version-a-basic-gearbox-without-spindle-for-spindle-kgt-25x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Travelling nut for worm gear screw jack NPT version C size 3 with trapezoidal thread Tr. 30x6 SKU: 47500316](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-3-with-trapezoidal-thread-tr-30x6-sku-47500316/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT and NPK version A and B size 3 outer Ø 90mm M20 SKU: 47500315](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-and-npk-version-a-and-b-size-3-outer-o-90mm-m20-sku-47500315/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT and NPK size 3 bearing inner Ø 25mm SKU: 47500314](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-and-npk-size-3-bearing-inner-o-25mm-sku-47500314/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT and NPK type Z2 size 3 130x105mm pins at long side SKU: 47500313](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z2-size-3-130x105mm-pins-at-long-side-sku-47500313/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT and NPK type Z1 size 3 130x105mm pins at short side SKU: 47500312](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z1-size-3-130x105mm-pins-at-short-side-sku-47500312/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT and NPK size 3 length 170mm SKU: 47500311](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-and-npk-size-3-length-170mm-sku-47500311/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 3 version A basic gearbox without spindle for spindle Tr.30x6 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500300](https://maedler.in/product/worm-gear-screw-jack-npt-size-3-version-a-basic-gearbox-without-spindle-for-spindle-tr-30x6-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Travelling nut for worm gear screw jack NPK version C size 3 with ball thread KGT 32x5 SKU: 475003LM6](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-3-with-ball-thread-kgt-32x5-sku-475003lm6/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Travelling nut for worm gear screw jack NPK version C size 3 with ball thread KGT 25x5 SKU: 475003LM1](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-3-with-ball-thread-kgt-25x5-sku-475003lm1/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Worm gear screw jack NPK size 2 version A basic gearbox without spindle for spindle KGT 20x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750022005](https://maedler.in/product/worm-gear-screw-jack-npk-size-2-version-a-basic-gearbox-without-spindle-for-spindle-kgt-20x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Travelling nut for worm gear screw jack NPT version C size 2 with trapezoidal thread Tr. 20x4 SKU: 47500216](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-2-with-trapezoidal-thread-tr-20x4-sku-47500216/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT and NPK version A and B size 2 outer Ø 80mm M14 SKU: 47500215](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-and-npk-version-a-and-b-size-2-outer-o-80mm-m14-sku-47500215/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT and NPK size 2 bearing inner Ø 20mm SKU: 47500214](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-and-npk-size-2-bearing-inner-o-20mm-sku-47500214/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT and NPK type Z2 size 2 100x85mm pins at long side SKU: 47500213](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z2-size-2-100x85mm-pins-at-long-side-sku-47500213/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT and NPK type Z1 size 2 100x85mm pins at short side SKU: 47500212](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z1-size-2-100x85mm-pins-at-short-side-sku-47500212/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT and NPK size 2 length 140mm SKU: 47500211](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-and-npk-size-2-length-140mm-sku-47500211/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 2 version A basic gearbox without spindle for spindle Tr.20x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500200](https://maedler.in/product/worm-gear-screw-jack-npt-size-2-version-a-basic-gearbox-without-spindle-for-spindle-tr-20x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-4750/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Travelling nut for worm gear screw jack NPK version C size 2 with ball thread KGT 20x5 SKU: 475002LM1](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-2-with-ball-thread-kgt-20x5-sku-475002lm1/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Worm gear screw jack NPK size 1 version A basic gearbox without spindle for spindle KGT 16x5 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 4750011605](https://maedler.in/product/worm-gear-screw-jack-npk-size-1-version-a-basic-gearbox-without-spindle-for-spindle-kgt-16x5-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-47/): Version A: In this standard version, the ball screw spindle moves in the axial direction. The object to be moved must be secured against rotation. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank. Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example. Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips. You will find further dimensions on our catalogue page. 1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version). 2) Stroke pro full rotation of the input shaft. 3) Required torque at max. load (only under optimum conditions). - [Travelling nut for worm gear screw jack NPT version C size 1 with trapezoidal thread Tr. 18x4 SKU: 47500116](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-1-with-trapezoidal-thread-tr-18x4-sku-47500116/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT and NPK version A and B size 1 outer Ø 65mm M12 SKU: 47500115](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-and-npk-version-a-and-b-size-1-outer-o-65mm-m12-sku-47500115/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT and NPK size 1 bearing inner Ø 15mm SKU: 47500114](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-and-npk-size-1-bearing-inner-o-15mm-sku-47500114/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT and NPK type Z2 size 1 80x72 mm pins at long side SKU: 47500113](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z2-size-1-80x72-mm-pins-at-long-side-sku-47500113/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT and NPK type Z1 size 1 80x72 mm pins at short side SKU: 47500112](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-and-npk-type-z1-size-1-80x72-mm-pins-at-short-side-sku-47500112/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT and NPK size 1 length 120mm SKU: 47500111](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-and-npk-size-1-length-120mm-sku-47500111/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 1 version A basic gearbox without spindle for spindle Tr.18x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500100](https://maedler.in/product/worm-gear-screw-jack-npt-size-1-version-a-basic-gearbox-without-spindle-for-spindle-tr-18x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Travelling nut for worm gear screw jack NPK version C size 1 with ball thread KGT 16x5 SKU: 475001LM1](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npk-version-c-size-1-with-ball-thread-kgt-16x5-sku-475001lm1/): Note: For assembly / disassembly, a sleeve must be used as an assembly aid. Supplied with assembly tool, without spindle. - [Travelling nut for worm gear screw jack NPT version C size 0 with trapezoidal thread Tr. 16x4 SKU: 47500016](https://maedler.in/product/travelling-nut-for-worm-gear-screw-jack-npt-version-c-size-0-with-trapezoidal-thread-tr-16x4-sku-47500016/): Material: Bronze CuSn12-C-GC (2.1052). Preferred installation position for compressive force: with the flange facing downwards (compressive load on the flange instead of tensile load on the screws). - [Flange plate for worm gear screw jack NPT version A and B size 0 outer Ø 50mm M10 SKU: 47500015](https://maedler.in/product/flange-plate-for-worm-gear-screw-jack-npt-version-a-and-b-size-0-outer-o-50mm-m10-sku-47500015/): Material: Steel C45, zinc-plated. Mounting plate with metric fastening thread, for mounting on the end of the spindle. - [Swivel feet set including screws for worm gear screw jack NPT size 0 bearing inner Ø 10mm SKU: 47500014](https://maedler.in/product/swivel-feet-set-including-screws-for-worm-gear-screw-jack-npt-size-0-bearing-inner-o-10mm-sku-47500014/): Material: Steel C45, zinc-plated. Swivel foot set (pair) for mounting the swivel plate. The centre distance of both swivel feet is dimension L4 when assembled. - [Swivel plate for worm gear screw jack NPT type Z2 size 0 64x54mm pins at long side SKU: 47500013](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-type-z2-size-0-64x54mm-pins-at-long-side-sku-47500013/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Swivel plate for worm gear screw jack NPT type Z1 size 0 64x54mm pins at short side SKU: 47500012](https://maedler.in/product/swivel-plate-for-worm-gear-screw-jack-npt-type-z1-size-0-64x54mm-pins-at-short-side-sku-47500012/): Material: Steel St52, zinc-plated. Swivel plate incl. screws for mounting the gear unit on the top or bottom side. - [Mounting feet set including screws for worm gear screw jacks NPT size 0 length 90mm SKU: 47500011](https://maedler.in/product/mounting-feet-set-including-screws-for-worm-gear-screw-jacks-npt-size-0-length-90mm-sku-47500011/): Material: Steel St52, zinc-plated. Fastening strip set incl. screws for fastening the gearbox to the top or bottom side. NPK version C requires longer screws (not included). 1) For worm gear screw jacks NPK version B, the mounting strips must be machined to fit the square tube. - [Worm gear screw jack NPT size 0 version A basic gearbox without spindle for spindle Tr.16x4 (For operating instructions please visit the download area of our website www.maedler.de) SKU: 47500000](https://maedler.in/product/worm-gear-screw-jack-npt-size-0-version-a-basic-gearbox-without-spindle-for-spindle-tr-16x4-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedler-de-sku-475/): Version A: Standard version. The threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The object to be moved must be secured against twisting. Housing: Made from aluminiumalloy in die-cast version. All sides machined. As standard filled withlubricant. Gearing: Worm made from ETG100, Gear made from Gbz12.Self-locking to a certain extend. Vibration, an increase in the spindlepitch or the use of rolling screw elements release the self-locking. Inthis case, e.g., a brake motor should be included in the system. Forlower stroke speeds, worm gear sets with higher transmission ratios canbe supplied on request. Spindle: Material C15, from size 4 C45.On request also available as left-hand, stainless steel or ball screwversion. Protective sleeve: The versions A and B are, unlessstated otherwise in the order, supplied with a protective sleeve. VersionA: With this standard version the threaded spindle moves 1 mm inaxial direction with every full rotation of the worm shaft. The spindlehas to be secured against twisting. Versions A and B are avaliable withan optional spindle end safety feature. This means the threaded spindleis locked before the safety sleeve is mounted, to limit the stroke inextended position so that the spindle cannot be screwed out of the gearunit. Attention: this safety feature means the safety sleeve is by about20 mm longer. The product numbers below only refer to the basic gearunits without spindle. Please ask for the price of the complete unitincluding spindle and accessories as, e.g., flange plate/travelling nut,bellow or coil spring cover, fastening strips. On request a version forlower stroke speed can be supplied. You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle) - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=591:1 output speed approx. 4.7 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456591](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i5911-output-speed-approx-4-7-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websi/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=443:1 output speed approx. 6,3 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456443](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i4431-output-speed-approx-63-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websi/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=295:1 output speed approx. 9.5 rpm Md2=46Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456295](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i2951-output-speed-approx-9-5-rpm-md246nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=177:1 output speed approx. 16 rpm Md2=37Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456177](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i1771-output-speed-approx-16-rpm-md237nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=142:1 output speed approx. 20 rpm Md2=30Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456142](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i1421-output-speed-approx-20-rpm-md230nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=106:1 output speed approx. 26 rpm Md2=27Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456106](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i1061-output-speed-approx-26-rpm-md227nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=89:1 output speed approx. 32 rpm Md2=24Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456089](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i891-output-speed-approx-32-rpm-md224nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=71:1 output speed approx. 39 rpm Md2=20Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456071](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i711-output-speed-approx-39-rpm-md220nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=59:1 output speed approx. 47 rpm Md2=17Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456059](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i591-output-speed-approx-47-rpm-md217nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=41:1 output speed approx. 68 rpm Md2=13Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456041](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i411-output-speed-approx-68-rpm-md213nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=30:1 output speed approx. 95 rpm Md2=9.4Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456030](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i301-output-speed-approx-95-rpm-md29-4nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maed/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 120 Watt 230/400V 50Hz IE2 i=15:1 output speed approx. 190 rpm Md2=4.9Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43456015](https://maedler.in/product/helical-worm-geared-motor-srs-120-watt-230-400v-50hz-ie2-i151-output-speed-approx-190-rpm-md24-9nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-mae/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=591:1 output speed approx. 2.4 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455591](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i5911-output-speed-approx-2-4-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=443:1 output speed approx. 3.2 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455443](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i4431-output-speed-approx-3-2-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=295:1 output speed approx. 4.7 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455295](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i2951-output-speed-approx-4-7-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=177:1 output speed approx. 7.9 rpm permitted Md2=50Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455177](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i1771-output-speed-approx-7-9-rpm-permitted-md250nm-for-operating-instructions-please-visit-the-download-area-of-our-websit/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Helical worm geared motor SRS 90 Watt 230/400V 50Hz IE1 i=142:1 output speed approx. 10 rpm Md2=41Nm (For operating instructions please visit the download area of our website www.maedler.de) SKU: 43455142](https://maedler.in/product/helical-worm-geared-motor-srs-90-watt-230-400v-50hz-ie1-i1421-output-speed-approx-10-rpm-md241nm-for-operating-instructions-please-visit-the-download-area-of-our-website-www-maedl/): 230/400V, 50Hz, IP54, isolation class F. Efficiency class: 90W IE1, 120W IE2. Can also be connected to alternating current using an operating capacitor. Motor and gearbox with roller bearing. 1st stage: Worms hardened and ground, Worm gears special brass. 2nd stage: Helical gear set hardened and ground. Note: Torques marked with * are stability related maximum torques. Dimensions without stated tolerances are non-binding. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 24 teeth material steel teeth induction hardened SKU: 10788124](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-24-teeth-material-steel-teeth-induction-hardened-sku-10788124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 23 teeth material steel teeth induction hardened SKU: 10788123](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-23-teeth-material-steel-teeth-induction-hardened-sku-10788123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 22 teeth material steel teeth induction hardened SKU: 10788122](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-22-teeth-material-steel-teeth-induction-hardened-sku-10788122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 21 teeth material steel teeth induction hardened SKU: 10788121](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-21-teeth-material-steel-teeth-induction-hardened-sku-10788121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 20 teeth material steel teeth induction hardened SKU: 10788120](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-20-teeth-material-steel-teeth-induction-hardened-sku-10788120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 19 teeth material steel teeth induction hardened SKU: 10788119](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-19-teeth-material-steel-teeth-induction-hardened-sku-10788119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 18 teeth material steel teeth induction hardened SKU: 10788118](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-18-teeth-material-steel-teeth-induction-hardened-sku-10788118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 17 teeth material steel teeth induction hardened SKU: 10788117](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-17-teeth-material-steel-teeth-induction-hardened-sku-10788117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 16 teeth material steel teeth induction hardened SKU: 10788116](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-16-teeth-material-steel-teeth-induction-hardened-sku-10788116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 15 teeth material steel teeth induction hardened SKU: 10788115](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-15-teeth-material-steel-teeth-induction-hardened-sku-10788115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 14 teeth material steel teeth induction hardened SKU: 10788114](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-14-teeth-material-steel-teeth-induction-hardened-sku-10788114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 13 teeth material steel teeth induction hardened SKU: 10788113](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-13-teeth-material-steel-teeth-induction-hardened-sku-10788113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 12 teeth material steel teeth induction hardened SKU: 10788112](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-12-teeth-material-steel-teeth-induction-hardened-sku-10788112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 11 teeth material steel teeth induction hardened SKU: 10788111](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-11-teeth-material-steel-teeth-induction-hardened-sku-10788111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 10 teeth material steel teeth induction hardened SKU: 10788110](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-10-teeth-material-steel-teeth-induction-hardened-sku-10788110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 9 teeth material steel teeth induction hardened SKU: 10788109](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-9-teeth-material-steel-teeth-induction-hardened-sku-10788109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 8 teeth material steel teeth induction hardened SKU: 10788108](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-8-teeth-material-steel-teeth-induction-hardened-sku-10788108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782550](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782550/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782548](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782548/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782545](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782545/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782542](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782542/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782540](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782540/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782538](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782538/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782535](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782535/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782532](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782532/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782530](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782530/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782528](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782528/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782525](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782525/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782450](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782450/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782448](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782448/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782445](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782445/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782442](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782442/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782440](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782440/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782438](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782438/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782435](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782435/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782432](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782432/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782430](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782430/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782428](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782428/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782425](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782350](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782350/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782348](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782348/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782345](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782345/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782342](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782342/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782340](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782340/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782338](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782338/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782335](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782335/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782332](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782332/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782330](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782330/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782328](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782328/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782325](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782325/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782250](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782250/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782248](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782248/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782245](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782245/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782242](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782242/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782240](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782240/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782238](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782238/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782235](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782235/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782232](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782232/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782230](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782230/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782228](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782228/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782225](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782225/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782150](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782150/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782148](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782148/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782145](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782145/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782142](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782142/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782140](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782140/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782138](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782138/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782135](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782135/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782132](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782132/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782130](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782130/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782128](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782128/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782125](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782125/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782050](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782050/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782048](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782048/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782045](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782045/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782042](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782042/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782040](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782040/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782038](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782038/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782035](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782035/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782032](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782032/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782030](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782030/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782028](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782028/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10782025](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10782025/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781950](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781950/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781948](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781948/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781945](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781945/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781942](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781942/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781940](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781940/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781938](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781938/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781935](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781935/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781932](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781932/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781930](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781930/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781928](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781928/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781925](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781925/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781842](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781842/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781840](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781840/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781838](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781838/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781835](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781835/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781832](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781832/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRF with hub 12 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10781830](https://maedler.in/product/sprocket-krf-with-hub-12-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10781830/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Slide set DZ 3308 slide length 305mm zinc plated SKU: 64903212](https://maedler.in/product/slide-set-dz-3308-slide-length-305mm-zinc-plated-sku-64903212/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-in in closed position. Lock-out in open position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 032 12, Slides 3308 - [Slide set DZ 3630 Slide length 700mm zinc plated SKU: 64903170](https://maedler.in/product/slide-set-dz-3630-slide-length-700mm-zinc-plated-sku-64903170/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Hold-in in the centre position.• Pulls out to front and back. For applications requiring access from both sides of the drawer.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mounts: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Horizontal mounting not recommended. Use all mounting positions to achieve the max. load rating.Over-extension per direction. - [Slide set DZ 3630 Slide length 600mm zinc plated SKU: 64903160](https://maedler.in/product/slide-set-dz-3630-slide-length-600mm-zinc-plated-sku-64903160/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Hold-in in the centre position.• Pulls out to front and back. For applications requiring access from both sides of the drawer.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mounts: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Horizontal mounting not recommended. Use all mounting positions to achieve the max. load rating.Over-extension per direction. - [Slide set DZ 3630 Slide length 550mm zinc plated SKU: 64903155](https://maedler.in/product/slide-set-dz-3630-slide-length-550mm-zinc-plated-sku-64903155/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Hold-in in the centre position.• Pulls out to front and back. For applications requiring access from both sides of the drawer.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mounts: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Horizontal mounting not recommended. Use all mounting positions to achieve the max. load rating.Over-extension per direction. - [Slide set DZ 3630 Slide length 500mm zinc plated SKU: 64903150](https://maedler.in/product/slide-set-dz-3630-slide-length-500mm-zinc-plated-sku-64903150/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Hold-in in the centre position.• Pulls out to front and back. For applications requiring access from both sides of the drawer.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mounts: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Horizontal mounting not recommended. Use all mounting positions to achieve the max. load rating.Over-extension per direction. - [Slide set DZ 3630 Slide length 450mm zinc plated SKU: 64903145](https://maedler.in/product/slide-set-dz-3630-slide-length-450mm-zinc-plated-sku-64903145/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Hold-in in the centre position.• Pulls out to front and back. For applications requiring access from both sides of the drawer.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mounts: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Horizontal mounting not recommended. Use all mounting positions to achieve the max. load rating.Over-extension per direction. - [Slide set DZ 3630 Slide length 400mm zinc plated SKU: 64903140](https://maedler.in/product/slide-set-dz-3630-slide-length-400mm-zinc-plated-sku-64903140/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Hold-in in the centre position.• Pulls out to front and back. For applications requiring access from both sides of the drawer.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mounts: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Horizontal mounting not recommended. Use all mounting positions to achieve the max. load rating.Over-extension per direction. - [Slide set DZ 3630 Slide length 350mm zinc plated SKU: 64903135](https://maedler.in/product/slide-set-dz-3630-slide-length-350mm-zinc-plated-sku-64903135/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Hold-in in the centre position.• Pulls out to front and back. For applications requiring access from both sides of the drawer.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mounts: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Horizontal mounting not recommended. Use all mounting positions to achieve the max. load rating.Over-extension per direction. - [Slide set DZ 3630 Slide length 300mm zinc plated SKU: 64903130](https://maedler.in/product/slide-set-dz-3630-slide-length-300mm-zinc-plated-sku-64903130/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Hold-in in the centre position.• Pulls out to front and back. For applications requiring access from both sides of the drawer.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mounts: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Horizontal mounting not recommended. Use all mounting positions to achieve the max. load rating.Over-extension per direction. - [Slide set DZ 3307 slide length 711mm zinc plated SKU: 64903028](https://maedler.in/product/slide-set-dz-3307-slide-length-711mm-zinc-plated-sku-64903028/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3307 slide length 660mm zinc plated SKU: 64903026](https://maedler.in/product/slide-set-dz-3307-slide-length-660mm-zinc-plated-sku-64903026/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3307 slide length 610mm zinc plated SKU: 64903024](https://maedler.in/product/slide-set-dz-3307-slide-length-610mm-zinc-plated-sku-64903024/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3307 slide length 559mm zinc plated SKU: 64903022](https://maedler.in/product/slide-set-dz-3307-slide-length-559mm-zinc-plated-sku-64903022/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3307 slide length 508mm zinc plated SKU: 64903020](https://maedler.in/product/slide-set-dz-3307-slide-length-508mm-zinc-plated-sku-64903020/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3307 slide length 457mm zinc plated SKU: 64903018](https://maedler.in/product/slide-set-dz-3307-slide-length-457mm-zinc-plated-sku-64903018/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3307 slide length 406mm zinc plated SKU: 64903016](https://maedler.in/product/slide-set-dz-3307-slide-length-406mm-zinc-plated-sku-64903016/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3307 slide length 356mm zinc plated SKU: 64903014](https://maedler.in/product/slide-set-dz-3307-slide-length-356mm-zinc-plated-sku-64903014/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3307 slide length 305mm zinc plated SKU: 64903012](https://maedler.in/product/slide-set-dz-3307-slide-length-305mm-zinc-plated-sku-64903012/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2730 Slide length 600mm zinc plated SKU: 64902960](https://maedler.in/product/slide-set-dz-2730-slide-length-600mm-zinc-plated-sku-64902960/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled, zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2730 Slide length 550mm zinc plated SKU: 64902955](https://maedler.in/product/slide-set-dz-2730-slide-length-550mm-zinc-plated-sku-64902955/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled, zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2730 Slide length 500mm zinc plated SKU: 64902950](https://maedler.in/product/slide-set-dz-2730-slide-length-500mm-zinc-plated-sku-64902950/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled, zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2730 Slide length 450mm zinc plated SKU: 64902945](https://maedler.in/product/slide-set-dz-2730-slide-length-450mm-zinc-plated-sku-64902945/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled, zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2730 Slide length 400mm zinc plated SKU: 64902940](https://maedler.in/product/slide-set-dz-2730-slide-length-400mm-zinc-plated-sku-64902940/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled, zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2730 Slide length 350mm zinc plated SKU: 64902935](https://maedler.in/product/slide-set-dz-2730-slide-length-350mm-zinc-plated-sku-64902935/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled, zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2730 Slide length 300mm zinc plated SKU: 64902930](https://maedler.in/product/slide-set-dz-2730-slide-length-300mm-zinc-plated-sku-64902930/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled, zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2730 Slide length 250mm zinc plated SKU: 64902925](https://maedler.in/product/slide-set-dz-2730-slide-length-250mm-zinc-plated-sku-64902925/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled, zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2730 Slide length 200mm zinc plated SKU: 64902920](https://maedler.in/product/slide-set-dz-2730-slide-length-200mm-zinc-plated-sku-64902920/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled, zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 3301 slide length 711mm zinc plated SKU: 64902828](https://maedler.in/product/slide-set-dz-3301-slide-length-711mm-zinc-plated-sku-64902828/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3301 slide length 660mm zinc plated SKU: 64902826](https://maedler.in/product/slide-set-dz-3301-slide-length-660mm-zinc-plated-sku-64902826/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3301 slide length 610mm zinc plated SKU: 64902824](https://maedler.in/product/slide-set-dz-3301-slide-length-610mm-zinc-plated-sku-64902824/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3301 slide length 559mm zinc plated SKU: 64902822](https://maedler.in/product/slide-set-dz-3301-slide-length-559mm-zinc-plated-sku-64902822/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3301 slide length 508mm zinc plated SKU: 64902820](https://maedler.in/product/slide-set-dz-3301-slide-length-508mm-zinc-plated-sku-64902820/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3301 slide length 457mm zinc plated SKU: 64902818](https://maedler.in/product/slide-set-dz-3301-slide-length-457mm-zinc-plated-sku-64902818/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3301 slide length 406mm zinc plated SKU: 64902816](https://maedler.in/product/slide-set-dz-3301-slide-length-406mm-zinc-plated-sku-64902816/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3301 slide length 356mm zinc plated SKU: 64902814](https://maedler.in/product/slide-set-dz-3301-slide-length-356mm-zinc-plated-sku-64902814/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3301 slide length 305mm zinc plated SKU: 64902812](https://maedler.in/product/slide-set-dz-3301-slide-length-305mm-zinc-plated-sku-64902812/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Mounting accessories included. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0305 slide length 711mm zinc plated SKU: 64902428](https://maedler.in/product/slide-set-dz-0305-slide-length-711mm-zinc-plated-sku-64902428/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0305 slide length 660mm zinc plated SKU: 64902426](https://maedler.in/product/slide-set-dz-0305-slide-length-660mm-zinc-plated-sku-64902426/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0305 slide length 610mm zinc plated SKU: 64902424](https://maedler.in/product/slide-set-dz-0305-slide-length-610mm-zinc-plated-sku-64902424/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0305 slide length 559mm zinc plated SKU: 64902422](https://maedler.in/product/slide-set-dz-0305-slide-length-559mm-zinc-plated-sku-64902422/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0305 slide length 508mm zinc plated SKU: 64902420](https://maedler.in/product/slide-set-dz-0305-slide-length-508mm-zinc-plated-sku-64902420/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0305 slide length 457mm zinc plated SKU: 64902418](https://maedler.in/product/slide-set-dz-0305-slide-length-457mm-zinc-plated-sku-64902418/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0305 slide length 406mm zinc plated SKU: 64902416](https://maedler.in/product/slide-set-dz-0305-slide-length-406mm-zinc-plated-sku-64902416/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0305 slide length 356mm zinc plated SKU: 64902414](https://maedler.in/product/slide-set-dz-0305-slide-length-356mm-zinc-plated-sku-64902414/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0305 slide length 305mm zinc plated SKU: 64902412](https://maedler.in/product/slide-set-dz-0305-slide-length-305mm-zinc-plated-sku-64902412/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Fast disconnection. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +110°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 762mm zinc plated SKU: 64902230](https://maedler.in/product/slide-set-dz-2907-slide-length-762mm-zinc-plated-sku-64902230/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 711mm zinc plated SKU: 64902228](https://maedler.in/product/slide-set-dz-2907-slide-length-711mm-zinc-plated-sku-64902228/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 660mm zinc plated SKU: 64902226](https://maedler.in/product/slide-set-dz-2907-slide-length-660mm-zinc-plated-sku-64902226/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 610mm zinc plated SKU: 64902224](https://maedler.in/product/slide-set-dz-2907-slide-length-610mm-zinc-plated-sku-64902224/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 559mm zinc plated SKU: 64902222](https://maedler.in/product/slide-set-dz-2907-slide-length-559mm-zinc-plated-sku-64902222/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 508mm zinc plated SKU: 64902220](https://maedler.in/product/slide-set-dz-2907-slide-length-508mm-zinc-plated-sku-64902220/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 457mm zinc plated SKU: 64902218](https://maedler.in/product/slide-set-dz-2907-slide-length-457mm-zinc-plated-sku-64902218/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 406mm zinc plated SKU: 64902216](https://maedler.in/product/slide-set-dz-2907-slide-length-406mm-zinc-plated-sku-64902216/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 356mm zinc plated SKU: 64902214](https://maedler.in/product/slide-set-dz-2907-slide-length-356mm-zinc-plated-sku-64902214/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2907 slide length 305mm zinc plated SKU: 64902212](https://maedler.in/product/slide-set-dz-2907-slide-length-305mm-zinc-plated-sku-64902212/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Bracket mount for electrical cabinets on request. Optional clip-on brackets available. For infrequent use, service life up to 2,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Pair of brackets DZ 633 for slides bracket length 546,8mm zinc plated SKU: 64902055](https://maedler.in/product/pair-of-brackets-dz-633-for-slides-bracket-length-5468mm-zinc-plated-sku-64902055/): Material: Steel, bright zinc-plated. Sold by pair (1 x product no. = 1 pair of brackets). Can be used for: Type 2109 / 2132 / 3732 / 3832 / 3832 DO / 3832 HDSC / 3832 SC. per pair of slides, one pair of clip-on brackets is required. Recommended mounts: M4 screw. Temperature range: -20°C to +110°C. Ordering details: e.g.: Product no. 649 020 35, pair of brackets type 633, zinc plated, length 346.7mm - [Pair of brackets DZ 633 for slide length 500mm bracket length 496,8mm zinc plated SKU: 64902050](https://maedler.in/product/pair-of-brackets-dz-633-for-slide-length-500mm-bracket-length-4968mm-zinc-plated-sku-64902050/): Material: Steel, bright zinc-plated. Sold by pair (1 x product no. = 1 pair of brackets). Can be used for: Type 2109 / 2132 / 3732 / 3832 / 3832 DO / 3832 HDSC / 3832 SC. per pair of slides, one pair of clip-on brackets is required. Recommended mounts: M4 screw. Temperature range: -20°C to +110°C. Ordering details: e.g.: Product no. 649 020 35, pair of brackets type 633, zinc plated, length 346.7mm - [Pair of brackets DZ 633 for slides bracket length 446,8mm zinc plated SKU: 64902045](https://maedler.in/product/pair-of-brackets-dz-633-for-slides-bracket-length-4468mm-zinc-plated-sku-64902045/): Material: Steel, bright zinc-plated. Sold by pair (1 x product no. = 1 pair of brackets). Can be used for: Type 2109 / 2132 / 3732 / 3832 / 3832 DO / 3832 HDSC / 3832 SC. per pair of slides, one pair of clip-on brackets is required. Recommended mounts: M4 screw. Temperature range: -20°C to +110°C. Ordering details: e.g.: Product no. 649 020 35, pair of brackets type 633, zinc plated, length 346.7mm - [Pair of brackets DZ 633 for slide length 400mm bracket length 396,7mm zinc plated SKU: 64902040](https://maedler.in/product/pair-of-brackets-dz-633-for-slide-length-400mm-bracket-length-3967mm-zinc-plated-sku-64902040/): Material: Steel, bright zinc-plated. Sold by pair (1 x product no. = 1 pair of brackets). Can be used for: Type 2109 / 2132 / 3732 / 3832 / 3832 DO / 3832 HDSC / 3832 SC. per pair of slides, one pair of clip-on brackets is required. Recommended mounts: M4 screw. Temperature range: -20°C to +110°C. Ordering details: e.g.: Product no. 649 020 35, pair of brackets type 633, zinc plated, length 346.7mm - [Pair of brackets DZ 633 for slide length 350mm bracket length 346,7mm zinc plated SKU: 64902035](https://maedler.in/product/pair-of-brackets-dz-633-for-slide-length-350mm-bracket-length-3467mm-zinc-plated-sku-64902035/): Material: Steel, bright zinc-plated. Sold by pair (1 x product no. = 1 pair of brackets). Can be used for: Type 2109 / 2132 / 3732 / 3832 / 3832 DO / 3832 HDSC / 3832 SC. per pair of slides, one pair of clip-on brackets is required. Recommended mounts: M4 screw. Temperature range: -20°C to +110°C. Ordering details: e.g.: Product no. 649 020 35, pair of brackets type 633, zinc plated, length 346.7mm - [Slide set DZ 2720 Slide length 500mm zinc plated SKU: 64901950](https://maedler.in/product/slide-set-dz-2720-slide-length-500mm-zinc-plated-sku-64901950/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended fastening: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2720 Slide length 450mm zinc plated SKU: 64901945](https://maedler.in/product/slide-set-dz-2720-slide-length-450mm-zinc-plated-sku-64901945/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended fastening: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2720 Slide length 400mm zinc plated SKU: 64901940](https://maedler.in/product/slide-set-dz-2720-slide-length-400mm-zinc-plated-sku-64901940/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended fastening: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2720 Slide length 350mm zinc plated SKU: 64901935](https://maedler.in/product/slide-set-dz-2720-slide-length-350mm-zinc-plated-sku-64901935/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended fastening: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2720 Slide length 300mm zinc plated SKU: 64901930](https://maedler.in/product/slide-set-dz-2720-slide-length-300mm-zinc-plated-sku-64901930/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended fastening: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2720 Slide length 250mm zinc plated SKU: 64901925](https://maedler.in/product/slide-set-dz-2720-slide-length-250mm-zinc-plated-sku-64901925/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended fastening: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 2720 Slide length 200mm zinc plated SKU: 64901920](https://maedler.in/product/slide-set-dz-2720-slide-length-200mm-zinc-plated-sku-64901920/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Cold-rolled steel, zinc-plated. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Compact profile.• Low height.• Service life 80,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended fastening: M4 screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. - [Slide set DZ 3832 DO slide length 700mm zinc plated SKU: 64901870](https://maedler.in/product/slide-set-dz-3832-do-slide-length-700mm-zinc-plated-sku-64901870/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 DO slide length 650mm zinc plated SKU: 64901865](https://maedler.in/product/slide-set-dz-3832-do-slide-length-650mm-zinc-plated-sku-64901865/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 DO slide length 600mm zinc plated SKU: 64901860](https://maedler.in/product/slide-set-dz-3832-do-slide-length-600mm-zinc-plated-sku-64901860/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 DO slide length 550mm zinc plated SKU: 64901855](https://maedler.in/product/slide-set-dz-3832-do-slide-length-550mm-zinc-plated-sku-64901855/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 DO slide length 500mm zinc plated SKU: 64901850](https://maedler.in/product/slide-set-dz-3832-do-slide-length-500mm-zinc-plated-sku-64901850/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 DO slide length 450mm zinc plated SKU: 64901845](https://maedler.in/product/slide-set-dz-3832-do-slide-length-450mm-zinc-plated-sku-64901845/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 DO slide length 400mm zinc plated SKU: 64901840](https://maedler.in/product/slide-set-dz-3832-do-slide-length-400mm-zinc-plated-sku-64901840/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 DO slide length 350mm zinc plated SKU: 64901835](https://maedler.in/product/slide-set-dz-3832-do-slide-length-350mm-zinc-plated-sku-64901835/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 DO slide length 300mm zinc plated SKU: 64901830](https://maedler.in/product/slide-set-dz-3832-do-slide-length-300mm-zinc-plated-sku-64901830/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 DO slide length 250mm zinc plated SKU: 64901825](https://maedler.in/product/slide-set-dz-3832-do-slide-length-250mm-zinc-plated-sku-64901825/): Material: Slide elements: Cold rolled steel, zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Hold-out in the open position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000 / 80,000 cycles (see load rating). Temperature range: -20°C to +70°C NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings.Horizontal mounting is not recommended. - [Slide set DZ 3832 EC-B slide length 700mm zinc plated SKU: 64901570](https://maedler.in/product/slide-set-dz-3832-ec-b-slide-length-700mm-zinc-plated-sku-64901570/): Material: Slide elements: Cold rolled steel, zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -10°C to +40°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 EC-B slide length 650mm zinc plated SKU: 64901565](https://maedler.in/product/slide-set-dz-3832-ec-b-slide-length-650mm-zinc-plated-sku-64901565/): Material: Slide elements: Cold rolled steel, zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -10°C to +40°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 EC-B slide length 600mm zinc plated SKU: 64901560](https://maedler.in/product/slide-set-dz-3832-ec-b-slide-length-600mm-zinc-plated-sku-64901560/): Material: Slide elements: Cold rolled steel, zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -10°C to +40°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 EC-B slide length 550mm zinc plated SKU: 64901555](https://maedler.in/product/slide-set-dz-3832-ec-b-slide-length-550mm-zinc-plated-sku-64901555/): Material: Slide elements: Cold rolled steel, zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -10°C to +40°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 EC-B slide length 500mm zinc plated SKU: 64901550](https://maedler.in/product/slide-set-dz-3832-ec-b-slide-length-500mm-zinc-plated-sku-64901550/): Material: Slide elements: Cold rolled steel, zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -10°C to +40°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 EC-B slide length 450mm zinc plated SKU: 64901545](https://maedler.in/product/slide-set-dz-3832-ec-b-slide-length-450mm-zinc-plated-sku-64901545/): Material: Slide elements: Cold rolled steel, zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -10°C to +40°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 EC-B slide length 400mm zinc plated SKU: 64901540](https://maedler.in/product/slide-set-dz-3832-ec-b-slide-length-400mm-zinc-plated-sku-64901540/): Material: Slide elements: Cold rolled steel, zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -10°C to +40°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 EC-B slide length 350mm zinc plated SKU: 64901535](https://maedler.in/product/slide-set-dz-3832-ec-b-slide-length-350mm-zinc-plated-sku-64901535/): Material: Slide elements: Cold rolled steel, zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Can be mounted on both sides. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -10°C to +40°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 SC slide length 650mm zinc plated SKU: 64901465](https://maedler.in/product/slide-set-dz-3832-sc-slide-length-650mm-zinc-plated-sku-64901465/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Fast disconnection. Self-close. Hold-in in closed position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000/ 80,000 cycles. Temperature range: -20°C to +70°C. Closing / opening force 14 - 27 N per slide. Alternative: Type HDSC with higher force 27 - 41 N. Note: Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 SC slide length 600mm zinc plated SKU: 64901460](https://maedler.in/product/slide-set-dz-3832-sc-slide-length-600mm-zinc-plated-sku-64901460/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Fast disconnection. Self-close. Hold-in in closed position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000/ 80,000 cycles. Temperature range: -20°C to +70°C. Closing / opening force 14 - 27 N per slide. Alternative: Type HDSC with higher force 27 - 41 N. Note: Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 SC slide length 550mm zinc plated SKU: 64901455](https://maedler.in/product/slide-set-dz-3832-sc-slide-length-550mm-zinc-plated-sku-64901455/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Fast disconnection. Self-close. Hold-in in closed position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000/ 80,000 cycles. Temperature range: -20°C to +70°C. Closing / opening force 14 - 27 N per slide. Alternative: Type HDSC with higher force 27 - 41 N. Note: Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 SC slide length 500mm zinc plated SKU: 64901450](https://maedler.in/product/slide-set-dz-3832-sc-slide-length-500mm-zinc-plated-sku-64901450/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Fast disconnection. Self-close. Hold-in in closed position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000/ 80,000 cycles. Temperature range: -20°C to +70°C. Closing / opening force 14 - 27 N per slide. Alternative: Type HDSC with higher force 27 - 41 N. Note: Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 SC slide length 450mm zinc plated SKU: 64901445](https://maedler.in/product/slide-set-dz-3832-sc-slide-length-450mm-zinc-plated-sku-64901445/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Fast disconnection. Self-close. Hold-in in closed position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000/ 80,000 cycles. Temperature range: -20°C to +70°C. Closing / opening force 14 - 27 N per slide. Alternative: Type HDSC with higher force 27 - 41 N. Note: Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 SC slide length 400mm zinc plated SKU: 64901440](https://maedler.in/product/slide-set-dz-3832-sc-slide-length-400mm-zinc-plated-sku-64901440/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Fast disconnection. Self-close. Hold-in in closed position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000/ 80,000 cycles. Temperature range: -20°C to +70°C. Closing / opening force 14 - 27 N per slide. Alternative: Type HDSC with higher force 27 - 41 N. Note: Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 SC slide length 350mm zinc plated SKU: 64901435](https://maedler.in/product/slide-set-dz-3832-sc-slide-length-350mm-zinc-plated-sku-64901435/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Fast disconnection. Self-close. Hold-in in closed position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000/ 80,000 cycles. Temperature range: -20°C to +70°C. Closing / opening force 14 - 27 N per slide. Alternative: Type HDSC with higher force 27 - 41 N. Note: Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 SC slide length 300mm zinc plated SKU: 64901430](https://maedler.in/product/slide-set-dz-3832-sc-slide-length-300mm-zinc-plated-sku-64901430/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Fast disconnection. Self-close. Hold-in in closed position. Cam drawer adjust (3.1 mm). Version zinc-plated, either bright or black, or painted white. Optional clip-on brackets available. Service life 10,000/ 80,000 cycles. Temperature range: -20°C to +70°C. Closing / opening force 14 - 27 N per slide. Alternative: Type HDSC with higher force 27 - 41 N. Note: Recommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. - [Slide set DZ 3832 TR slide length 700mm zinc plated SKU: 64901370](https://maedler.in/product/slide-set-dz-3832-tr-slide-length-700mm-zinc-plated-sku-64901370/): Material: Slide elements: Cold rolled steel, either zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Operation by pressing on the drawer (Grip or knob not required). Fast disconnect. Hold-in in the closed position. Setting cams for drawer (3.1 mm). Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. Type TR: Required compressive force approx. 50 N. Model either bright zinc-plated, black passivated or white coated. Alternative: Type 3832 HDTR, required force approx. 80 N. Note Recommended fastening: M4 screw. use all mounting positions. The drawer may not be wider than the slide lenght. Horizontal mounting is not possible. Ordering details: e.g.: Product no. 649 013 30, Slides 3832 TR - [Slide set DZ 3832 TR slide length 650mm zinc plated SKU: 64901365](https://maedler.in/product/slide-set-dz-3832-tr-slide-length-650mm-zinc-plated-sku-64901365/): Material: Slide elements: Cold rolled steel, either zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Operation by pressing on the drawer (Grip or knob not required). Fast disconnect. Hold-in in the closed position. Setting cams for drawer (3.1 mm). Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. Type TR: Required compressive force approx. 50 N. Model either bright zinc-plated, black passivated or white coated. Alternative: Type 3832 HDTR, required force approx. 80 N. Note Recommended fastening: M4 screw. use all mounting positions. The drawer may not be wider than the slide lenght. Horizontal mounting is not possible. Ordering details: e.g.: Product no. 649 013 30, Slides 3832 TR - [Slide set DZ 3832 TR slide length 600mm zinc plated SKU: 64901360](https://maedler.in/product/slide-set-dz-3832-tr-slide-length-600mm-zinc-plated-sku-64901360/): Material: Slide elements: Cold rolled steel, either zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Operation by pressing on the drawer (Grip or knob not required). Fast disconnect. Hold-in in the closed position. Setting cams for drawer (3.1 mm). Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. Type TR: Required compressive force approx. 50 N. Model either bright zinc-plated, black passivated or white coated. Alternative: Type 3832 HDTR, required force approx. 80 N. Note Recommended fastening: M4 screw. use all mounting positions. The drawer may not be wider than the slide lenght. Horizontal mounting is not possible. Ordering details: e.g.: Product no. 649 013 30, Slides 3832 TR - [Slide set DZ 3832 TR slide length 550mm zinc plated SKU: 64901355](https://maedler.in/product/slide-set-dz-3832-tr-slide-length-550mm-zinc-plated-sku-64901355/): Material: Slide elements: Cold rolled steel, either zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Operation by pressing on the drawer (Grip or knob not required). Fast disconnect. Hold-in in the closed position. Setting cams for drawer (3.1 mm). Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. Type TR: Required compressive force approx. 50 N. Model either bright zinc-plated, black passivated or white coated. Alternative: Type 3832 HDTR, required force approx. 80 N. Note Recommended fastening: M4 screw. use all mounting positions. The drawer may not be wider than the slide lenght. Horizontal mounting is not possible. Ordering details: e.g.: Product no. 649 013 30, Slides 3832 TR - [Slide set DZ 3832 TR slide length 500mm zinc plated SKU: 64901350](https://maedler.in/product/slide-set-dz-3832-tr-slide-length-500mm-zinc-plated-sku-64901350/): Material: Slide elements: Cold rolled steel, either zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Operation by pressing on the drawer (Grip or knob not required). Fast disconnect. Hold-in in the closed position. Setting cams for drawer (3.1 mm). Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. Type TR: Required compressive force approx. 50 N. Model either bright zinc-plated, black passivated or white coated. Alternative: Type 3832 HDTR, required force approx. 80 N. Note Recommended fastening: M4 screw. use all mounting positions. The drawer may not be wider than the slide lenght. Horizontal mounting is not possible. Ordering details: e.g.: Product no. 649 013 30, Slides 3832 TR - [Slide set DZ 3832 TR slide length 450mm zinc plated SKU: 64901345](https://maedler.in/product/slide-set-dz-3832-tr-slide-length-450mm-zinc-plated-sku-64901345/): Material: Slide elements: Cold rolled steel, either zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Operation by pressing on the drawer (Grip or knob not required). Fast disconnect. Hold-in in the closed position. Setting cams for drawer (3.1 mm). Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. Type TR: Required compressive force approx. 50 N. Model either bright zinc-plated, black passivated or white coated. Alternative: Type 3832 HDTR, required force approx. 80 N. Note Recommended fastening: M4 screw. use all mounting positions. The drawer may not be wider than the slide lenght. Horizontal mounting is not possible. Ordering details: e.g.: Product no. 649 013 30, Slides 3832 TR - [Slide set DZ 3832 TR slide length 400mm zinc plated SKU: 64901340](https://maedler.in/product/slide-set-dz-3832-tr-slide-length-400mm-zinc-plated-sku-64901340/): Material: Slide elements: Cold rolled steel, either zinc plated or coated. Ball retainers: Plastic / zinc plated steel. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Operation by pressing on the drawer (Grip or knob not required). Fast disconnect. Hold-in in the closed position. Setting cams for drawer (3.1 mm). Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. Type TR: Required compressive force approx. 50 N. Model either bright zinc-plated, black passivated or white coated. Alternative: Type 3832 HDTR, required force approx. 80 N. Note Recommended fastening: M4 screw. use all mounting positions. The drawer may not be wider than the slide lenght. Horizontal mounting is not possible. Ordering details: e.g.: Product no. 649 013 30, Slides 3832 TR - [Central drive system for travel-wheel system RB/I size 250 up to distance 2900mm diameter 45mm length approx. 2470mm SKU: 48035784](https://maedler.in/product/central-drive-system-for-travel-wheel-system-rb-i-size-250-up-to-distance-2900mm-diameter-45mm-length-approx-2470mm-sku-48035784/): Material: Splined shaft, coupling, washers and rings made of steel, shaft protection made of plastic. Two sizes available suiting travel-wheel system 200 and 250. Two length for gauges up to 1500 mm or up to 2900 mm. Consisting of: Splined shaft, coupling with pin, shaft protection, washers and retaining rings. The central-drive set serves to combine two travel-wheel sets RB/I with a geared motor RBM/I to make up a central drive. To achieve this, the shaft is shortened to the required length on the coupling side, then the shaft protection cap is taken off the geared motor and the shafts are connected using the rigid coupling. The pin serves as stop inside the coupling. The shaft is fixed in the travel-wheel system with the retaining rings. - [Central drive system for travel-wheel system RB/I size 250 up to distance 1500mm diameter 45mm length approx. 1070mm SKU: 48035684](https://maedler.in/product/central-drive-system-for-travel-wheel-system-rb-i-size-250-up-to-distance-1500mm-diameter-45mm-length-approx-1070mm-sku-48035684/): Material: Splined shaft, coupling, washers and rings made of steel, shaft protection made of plastic. Two sizes available suiting travel-wheel system 200 and 250. Two length for gauges up to 1500 mm or up to 2900 mm. Consisting of: Splined shaft, coupling with pin, shaft protection, washers and retaining rings. The central-drive set serves to combine two travel-wheel sets RB/I with a geared motor RBM/I to make up a central drive. To achieve this, the shaft is shortened to the required length on the coupling side, then the shaft protection cap is taken off the geared motor and the shafts are connected using the rigid coupling. The pin serves as stop inside the coupling. The shaft is fixed in the travel-wheel system with the retaining rings. - [Bolt connecting set for travel-wheel system RB/I size 250 bolt diameter 30mm SKU: 48032184](https://maedler.in/product/bolt-connecting-set-for-travel-wheel-system-rb-i-size-250-bolt-diameter-30mm-sku-48032184/): Material: Steel Consisting of: two pins, washers and retaining rings, threaded adjusting pins and nuts for lateral alignment and fixation. Two sizes for travel-wheel system size 200 or 250. The pin connection set is used to mount the travel-wheel system into an existing hollow section when mounted from the side. One set required for each travel-wheel system. - [Horizontal guide-roller arrangement for travel-wheel system RB/I size 250 type K overall width 230mm with damper SKU: 48031084](https://maedler.in/product/horizontal-guide-roller-arrangement-for-travel-wheel-system-rb-i-size-250-type-k-overall-width-230mm-with-damper-sku-48031084/): Material: Base: steel plate, zinc plated. Damping elements: Polyamide (damping elements only for travel-wheel system with Hydropur-tyre travel wheel). Version G: for travel-wheel system with cast wheel. Without damping element. Version K: for travel-wheel system with Hydropur tyre. With damping element. Consisting of: roller bracket, bearing, damping element and mounting bolts (damping element only for version K). Two sizes for travel-wheel system size 200 or 250. The horizontal guide-roller arrangement is used for low-friction guidance and to precisely achieve individual track gauge dimensions. The guide roller is e.g. recommended for flanged wheels (version G) running on narrow tracks. The guide rollers are only used on one of the rails. - [Travel-wheel system RB/I size 250 with crane wheel case length 306mm SKU: 48030184](https://maedler.in/product/travel-wheel-system-rb-i-size-250-with-crane-wheel-case-length-306mm-sku-48030184/): Material: Housing made of spharoidal graphite cast iron, painted gray. Travel wheel made of GGG 70, with high-quality roller bearing. Version G: With cast iron travel wheel with two flanges, with high load capacity, to be used on rails. Version K: With cast iron travel wheel with PUR-bandage (Polyurethane-Elastomer), for higher traction at low oprating noise. A very robust, universal, maintenance-free travel wheel system available in two sizes. It is designed for various travel applications with wheel loads up to 3.5 t and travel speeds up to 240 m/min (depending on version and load). It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system. The five connection surfaces are machined and provide for a multitude of connection variants. 4 screws for inverted mounting are supplied. The housing is painted gray (RAL 7001) and can be repainted. The travel-wheel systems can be combined with the geared motors RBM/I to form a compact drive unit. - [Travel-wheel system RB/I size 250 with PUR-bandaged wheel case length 306mm SKU: 48030084](https://maedler.in/product/travel-wheel-system-rb-i-size-250-with-pur-bandaged-wheel-case-length-306mm-sku-48030084/): Material: Housing made of spharoidal graphite cast iron, painted gray. Travel wheel made of GGG 70, with high-quality roller bearing. Version G: With cast iron travel wheel with two flanges, with high load capacity, to be used on rails. Version K: With cast iron travel wheel with PUR-bandage (Polyurethane-Elastomer), for higher traction at low oprating noise. A very robust, universal, maintenance-free travel wheel system available in two sizes. It is designed for various travel applications with wheel loads up to 3.5 t and travel speeds up to 240 m/min (depending on version and load). It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system. The five connection surfaces are machined and provide for a multitude of connection variants. 4 screws for inverted mounting are supplied. The housing is painted gray (RAL 7001) and can be repainted. The travel-wheel systems can be combined with the geared motors RBM/I to form a compact drive unit. - [Central drive system for travel-wheel system RB/I size 200 up to distance 2900mm diameter 35mm length approx. 2515mm SKU: 48025784](https://maedler.in/product/central-drive-system-for-travel-wheel-system-rb-i-size-200-up-to-distance-2900mm-diameter-35mm-length-approx-2515mm-sku-48025784/): Material: Splined shaft, coupling, washers and rings made of steel, shaft protection made of plastic. Two sizes available suiting travel-wheel system 200 and 250. Two length for gauges up to 1500 mm or up to 2900 mm. Consisting of: Splined shaft, coupling with pin, shaft protection, washers and retaining rings. The central-drive set serves to combine two travel-wheel sets RB/I with a geared motor RBM/I to make up a central drive. To achieve this, the shaft is shortened to the required length on the coupling side, then the shaft protection cap is taken off the geared motor and the shafts are connected using the rigid coupling. The pin serves as stop inside the coupling. The shaft is fixed in the travel-wheel system with the retaining rings. - [Central drive system for travel-wheel system RB/I size 200 up to distance 1500mm diameter 35mm length approx. 1115mm SKU: 48025684](https://maedler.in/product/central-drive-system-for-travel-wheel-system-rb-i-size-200-up-to-distance-1500mm-diameter-35mm-length-approx-1115mm-sku-48025684/): Material: Splined shaft, coupling, washers and rings made of steel, shaft protection made of plastic. Two sizes available suiting travel-wheel system 200 and 250. Two length for gauges up to 1500 mm or up to 2900 mm. Consisting of: Splined shaft, coupling with pin, shaft protection, washers and retaining rings. The central-drive set serves to combine two travel-wheel sets RB/I with a geared motor RBM/I to make up a central drive. To achieve this, the shaft is shortened to the required length on the coupling side, then the shaft protection cap is taken off the geared motor and the shafts are connected using the rigid coupling. The pin serves as stop inside the coupling. The shaft is fixed in the travel-wheel system with the retaining rings. - [Bolt connecting set for travel-wheel system RB/I size 200 bolt diameter 21mm SKU: 48022184](https://maedler.in/product/bolt-connecting-set-for-travel-wheel-system-rb-i-size-200-bolt-diameter-21mm-sku-48022184/): Material: Steel Consisting of: two pins, washers and retaining rings, threaded adjusting pins and nuts for lateral alignment and fixation. Two sizes for travel-wheel system size 200 or 250. The pin connection set is used to mount the travel-wheel system into an existing hollow section when mounted from the side. One set required for each travel-wheel system. - [Horizontal guide-roller arrangement for travel-wheel system RB/I size 200 type K overall width 192mm with damper SKU: 48021084](https://maedler.in/product/horizontal-guide-roller-arrangement-for-travel-wheel-system-rb-i-size-200-type-k-overall-width-192mm-with-damper-sku-48021084/): Material: Base: steel plate, zinc plated. Damping elements: Polyamide (damping elements only for travel-wheel system with Hydropur-tyre travel wheel). Version G: for travel-wheel system with cast wheel. Without damping element. Version K: for travel-wheel system with Hydropur tyre. With damping element. Consisting of: roller bracket, bearing, damping element and mounting bolts (damping element only for version K). Two sizes for travel-wheel system size 200 or 250. The horizontal guide-roller arrangement is used for low-friction guidance and to precisely achieve individual track gauge dimensions. The guide roller is e.g. recommended for flanged wheels (version G) running on narrow tracks. The guide rollers are only used on one of the rails. - [Horizontal guide-roller arrangement for travel-wheel system RB/I size 200 type G overall width 192mm without damper SKU: 48021044](https://maedler.in/product/horizontal-guide-roller-arrangement-for-travel-wheel-system-rb-i-size-200-type-g-overall-width-192mm-without-damper-sku-48021044/): Material: Base: steel plate, zinc plated. Damping elements: Polyamide (damping elements only for travel-wheel system with Hydropur-tyre travel wheel). Version G: for travel-wheel system with cast wheel. Without damping element. Version K: for travel-wheel system with Hydropur tyre. With damping element. Consisting of: roller bracket, bearing, damping element and mounting bolts (damping element only for version K). Two sizes for travel-wheel system size 200 or 250. The horizontal guide-roller arrangement is used for low-friction guidance and to precisely achieve individual track gauge dimensions. The guide roller is e.g. recommended for flanged wheels (version G) running on narrow tracks. The guide rollers are only used on one of the rails. - [Travel-wheel system RB/I size 200 with crane wheel case length 250mm SKU: 48020184](https://maedler.in/product/travel-wheel-system-rb-i-size-200-with-crane-wheel-case-length-250mm-sku-48020184/): Material: Housing made of spharoidal graphite cast iron, painted gray. Travel wheel made of GGG 70, with high-quality roller bearing. Version G: With cast iron travel wheel with two flanges, with high load capacity, to be used on rails. Version K: With cast iron travel wheel with PUR-bandage (Polyurethane-Elastomer), for higher traction at low oprating noise. A very robust, universal, maintenance-free travel wheel system available in two sizes. It is designed for various travel applications with wheel loads up to 3.5 t and travel speeds up to 240 m/min (depending on version and load). It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system. The five connection surfaces are machined and provide for a multitude of connection variants. 4 screws for inverted mounting are supplied. The housing is painted gray (RAL 7001) and can be repainted. The travel-wheel systems can be combined with the geared motors RBM/I to form a compact drive unit. - [Travel-wheel system RB/I size 200 with PUR-bandaged wheel case length 250mm SKU: 48020084](https://maedler.in/product/travel-wheel-system-rb-i-size-200-with-pur-bandaged-wheel-case-length-250mm-sku-48020084/): Material: Housing made of spharoidal graphite cast iron, painted gray. Travel wheel made of GGG 70, with high-quality roller bearing. Version G: With cast iron travel wheel with two flanges, with high load capacity, to be used on rails. Version K: With cast iron travel wheel with PUR-bandage (Polyurethane-Elastomer), for higher traction at low oprating noise. A very robust, universal, maintenance-free travel wheel system available in two sizes. It is designed for various travel applications with wheel loads up to 3.5 t and travel speeds up to 240 m/min (depending on version and load). It can even be used at extreme ambient temperatures from -20 °C to +60 °C. Engineers who want to develop their own drive systems can also achieve fast and reliable solutions using the versatile modular construction system. The five connection surfaces are machined and provide for a multitude of connection variants. 4 screws for inverted mounting are supplied. The housing is painted gray (RAL 7001) and can be repainted. The travel-wheel systems can be combined with the geared motors RBM/I to form a compact drive unit. - [Actuator MM 128 speed 17.5 mm/sec stroke 500 mm 3x 400V AC 50Hz SKU: 47542809](https://maedler.in/product/actuator-mm-128-speed-17-5-mm-sec-stroke-500-mm-3x-400v-ac-50hz-sku-47542809/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 17.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47542808](https://maedler.in/product/actuator-mm-128-speed-17-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47542808/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 17.5 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47542807](https://maedler.in/product/actuator-mm-128-speed-17-5-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47542807/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 4.4 mm/sec stroke 500 mm 3x 400V AC 50Hz SKU: 47542806](https://maedler.in/product/actuator-mm-128-speed-4-4-mm-sec-stroke-500-mm-3x-400v-ac-50hz-sku-47542806/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 4.4 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47542805](https://maedler.in/product/actuator-mm-128-speed-4-4-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47542805/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 4.4 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47542804](https://maedler.in/product/actuator-mm-128-speed-4-4-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47542804/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 1.1 mm/sec stroke 500 mm 3x 400V AC 50Hz SKU: 47542803](https://maedler.in/product/actuator-mm-128-speed-1-1-mm-sec-stroke-500-mm-3x-400v-ac-50hz-sku-47542803/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 1.1 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47542802](https://maedler.in/product/actuator-mm-128-speed-1-1-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47542802/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 128 speed 1.1 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47542801](https://maedler.in/product/actuator-mm-128-speed-1-1-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47542801/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 128 mm.• Voltage 3x 400V AC 50Hz.• Force up to 26.000 N.• Speed 1.1 to 17.5 mm/s.• Standard stroke lengths 175, 300 and 500 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 18 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47541506](https://maedler.in/product/actuator-mm-115-speed-18-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47541506/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 18 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47541505](https://maedler.in/product/actuator-mm-115-speed-18-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47541505/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 5.0 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47541504](https://maedler.in/product/actuator-mm-115-speed-5-0-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47541504/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 5.0 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47541503](https://maedler.in/product/actuator-mm-115-speed-5-0-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47541503/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 1.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47541502](https://maedler.in/product/actuator-mm-115-speed-1-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47541502/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 115 speed 1.5 mm/sec stroke 175 mm 3x 400V AC 50Hz SKU: 47541501](https://maedler.in/product/actuator-mm-115-speed-1-5-mm-sec-stroke-175-mm-3x-400v-ac-50hz-sku-47541501/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 115 mm.• Voltage 3x 400V AC 50Hz.• Force up to 14.000 N.• Speed 1.5 to 18 mm/s.• Standard stroke lengths 175 and 300 mm.• Housing from steel, RAL 7031 blue-grey coated. - [Actuator MM 95 speed 10.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47539529](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47539529/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47539528](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47539528/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 150 mm 3x 400V AC 50Hz SKU: 47539527](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-150-mm-3x-400v-ac-50hz-sku-47539527/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47539526](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47539526/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47539525](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47539525/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 150 mm 3x 400V AC 50Hz SKU: 47539524](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-150-mm-3x-400v-ac-50hz-sku-47539524/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47539523](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47539523/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47539522](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47539522/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 150 mm 3x 400V AC 50Hz SKU: 47539521](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-150-mm-3x-400v-ac-50hz-sku-47539521/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47539509](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47539509/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47539508](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47539508/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 10.5 mm/sec stroke 150 mm 1x 230V AC 50Hz SKU: 47539507](https://maedler.in/product/actuator-mm-95-speed-10-5-mm-sec-stroke-150-mm-1x-230v-ac-50hz-sku-47539507/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47539506](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47539506/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47539505](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47539505/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 2.5 mm/sec stroke 150 mm 1x 230V AC 50Hz SKU: 47539504](https://maedler.in/product/actuator-mm-95-speed-2-5-mm-sec-stroke-150-mm-1x-230v-ac-50hz-sku-47539504/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47539503](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47539503/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47539502](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47539502/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 95 speed 0.5 mm/sec stroke 150 mm 1x 230V AC 50Hz SKU: 47539501](https://maedler.in/product/actuator-mm-95-speed-0-5-mm-sec-stroke-150-mm-1x-230v-ac-50hz-sku-47539501/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 95 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 3.500 N.• Speed 0.5 to 10.5 mm/s.• Standard stroke lengths 150, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47538029](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47538029/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47538028](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47538028/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 100 mm 3x 400V AC 50Hz SKU: 47538027](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-100-mm-3x-400v-ac-50hz-sku-47538027/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47538026](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47538026/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47538025](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47538025/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 100 mm 3x 400V AC 50Hz SKU: 47538024](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-100-mm-3x-400v-ac-50hz-sku-47538024/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 300 mm 3x 400V AC 50Hz SKU: 47538023](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-300-mm-3x-400v-ac-50hz-sku-47538023/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 200 mm 3x 400V AC 50Hz SKU: 47538022](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-200-mm-3x-400v-ac-50hz-sku-47538022/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 100 mm 3x 400V AC 50Hz SKU: 47538021](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-100-mm-3x-400v-ac-50hz-sku-47538021/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47538009](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47538009/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47538008](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47538008/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 10 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47538007](https://maedler.in/product/actuator-mm-80-speed-10-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47538007/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47538006](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47538006/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47538005](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47538005/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 2.0 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47538004](https://maedler.in/product/actuator-mm-80-speed-2-0-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47538004/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47538003](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47538003/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47538002](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47538002/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 80 speed 0.5 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47538001](https://maedler.in/product/actuator-mm-80-speed-0-5-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47538001/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design. High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated safety switch. Integrated thermo protection switch. Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 80 mm.• Voltage 1x 230V AC 50Hz or 3x 400V AC 50Hz.• Force up to 1.600 N.• Speed 0.5 to 10 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 10 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47536029](https://maedler.in/product/actuator-mm-60-speed-10-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47536029/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 10 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47536028](https://maedler.in/product/actuator-mm-60-speed-10-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47536028/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 10 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47536027](https://maedler.in/product/actuator-mm-60-speed-10-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47536027/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 2.7 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47536026](https://maedler.in/product/actuator-mm-60-speed-2-7-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47536026/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 2.7 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47536025](https://maedler.in/product/actuator-mm-60-speed-2-7-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47536025/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 2.7 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47536024](https://maedler.in/product/actuator-mm-60-speed-2-7-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47536024/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 0.7 mm/sec stroke 300 mm 1x 230V AC 50Hz SKU: 47536023](https://maedler.in/product/actuator-mm-60-speed-0-7-mm-sec-stroke-300-mm-1x-230v-ac-50hz-sku-47536023/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 0.7 mm/sec stroke 200 mm 1x 230V AC 50Hz SKU: 47536022](https://maedler.in/product/actuator-mm-60-speed-0-7-mm-sec-stroke-200-mm-1x-230v-ac-50hz-sku-47536022/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 0.7 mm/sec stroke 100 mm 1x 230V AC 50Hz SKU: 47536021](https://maedler.in/product/actuator-mm-60-speed-0-7-mm-sec-stroke-100-mm-1x-230v-ac-50hz-sku-47536021/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 16 mm/sec stroke 300 mm 24V DC SKU: 47536009](https://maedler.in/product/actuator-mm-60-speed-16-mm-sec-stroke-300-mm-24v-dc-sku-47536009/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 16 mm/sec stroke 200 mm 24V DC SKU: 47536008](https://maedler.in/product/actuator-mm-60-speed-16-mm-sec-stroke-200-mm-24v-dc-sku-47536008/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 16 mm/sec stroke 100 mm 24V DC SKU: 47536007](https://maedler.in/product/actuator-mm-60-speed-16-mm-sec-stroke-100-mm-24v-dc-sku-47536007/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 5.5 mm/sec stroke 300 mm 24V DC SKU: 47536006](https://maedler.in/product/actuator-mm-60-speed-5-5-mm-sec-stroke-300-mm-24v-dc-sku-47536006/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 5.5 mm/sec stroke 200 mm 24V DC SKU: 47536005](https://maedler.in/product/actuator-mm-60-speed-5-5-mm-sec-stroke-200-mm-24v-dc-sku-47536005/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 5.5 mm/sec stroke 100 mm 24V DC SKU: 47536004](https://maedler.in/product/actuator-mm-60-speed-5-5-mm-sec-stroke-100-mm-24v-dc-sku-47536004/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 1.5 mm/sec stroke 300 mm 24V DC SKU: 47536003](https://maedler.in/product/actuator-mm-60-speed-1-5-mm-sec-stroke-300-mm-24v-dc-sku-47536003/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 1.5 mm/sec stroke 200 mm 24V DC SKU: 47536002](https://maedler.in/product/actuator-mm-60-speed-1-5-mm-sec-stroke-200-mm-24v-dc-sku-47536002/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Actuator MM 60 speed 1.5 mm/sec stroke 100 mm 24V DC SKU: 47536001](https://maedler.in/product/actuator-mm-60-speed-1-5-mm-sec-stroke-100-mm-24v-dc-sku-47536001/): The MÄDLER® Mini linear drives are electrical lifting cylinders in particularly reliable design.High performance in relation to the size. Light weight and clean, with low operating costs. Durable and maintenance-free, lubricated for lifetime. Integrated end switch, non-adjustable. Integrated thermo protection switch (not at 24V DC). Dynamically self-locking. Protection IP 65 (against hose water). Delivery with connected power cable, length ≈ 1 meter.• Outside-Ø 60 mm.• Voltage 24V DC or 1x 230V AC 50Hz.• Force up to 1.000 N.• Speed 0.7 to 16 mm/s.• Standard stroke lengths 100, 200 and 300 mm.• Housing, piston rod and mounting elements from stainless steel. - [Trapezoidal threaded spindle Tr.10x3x383mm length for stroke 300mm for linear drive SFL SKU: 47520130](https://maedler.in/product/trapezoidal-threaded-spindle-tr-10x3x383mm-length-for-stroke-300mm-for-linear-drive-sfl-sku-47520130/): Ready-to-install spindle for 300mm stroke length. Alternatively: product no. 64001000, spindle with length one meter from steel C15, or product no. 64099010, spindle with length one meter from stainless steel, for further processing by the customer. Caution: Due to kinking, the max stroke length under compressive loads is limited to 300 mm. The spindle has to be adequately lubricated before screwing in and operating (with normal machine grease). Mounting eye and stop block are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 400N with Hall-IC SKU: 47520114](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-400n-with-hall-ic-sku-47520114/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 400(200)N with Hall-IC SKU: 47520113](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-400200n-with-hall-ic-sku-47520113/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 1200N with Hall-IC SKU: 47520112](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-1200n-with-hall-ic-sku-47520112/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 1000N with Hall-IC SKU: 47520111](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-1000n-with-hall-ic-sku-47520111/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Connecting cable with Molex plug for linear drives SFL with Hall-IC length 500mm SKU: 47520110](https://maedler.in/product/connecting-cable-with-molex-plug-for-linear-drives-sfl-with-hall-ic-length-500mm-sku-47520110/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. With Hall-IC for positioning, end position limit or speed control. The cable with Molex-plug, length 500mm, product no. 47520110 has to be ordered seperately. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 400N without Hall-IC SKU: 47520104](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-400n-without-hall-ic-sku-47520104/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 400(200)N without Hall-IC SKU: 47520103](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-400200n-without-hall-ic-sku-47520103/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 1200N without Hall-IC SKU: 47520102](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-1200n-without-hall-ic-sku-47520102/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Linear drive SFL with DC-motor operating voltage 12V-24V nominal lifting force 1000N without Hall-IC SKU: 47520101](https://maedler.in/product/linear-drive-sfl-with-dc-motor-operating-voltage-12v-24v-nominal-lifting-force-1000n-without-hall-ic-sku-47520101/): Housing: Motor: Steel, zinc-plated. Gearbox: Aluminium. Can be mounted in any position. Gearbox: Metal gears, trapezoidal thread nuts made from plastic. Bearing: Plain bearings. Lubrication: Spindle nut must be greased by the customer. Motor: DC motor 12 V or 24 V switching voltage, interference-free. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 20. Operating mode as per VDE 0530: S2. Universal use linear drives, e.g. for actuating devices. For Spindle Tr. 10 x 3 mm. The required spindle length depends on the required stroke length. The spindles have to be ordered separately. Mounting eye and stop block for spindle ends are included with the linear drive. - [Cable with plug with 8 pins and screen for to connect the GR/I control box with a customer´s controller cable length approx. 1.8m - extended approx. 4m ### Note: only for potentialfree contacts ### SKU: 47519205](https://maedler.in/product/cable-with-plug-with-8-pins-and-screen-for-to-connect-the-gr-i-control-box-with-a-customers-controller-cable-length-approx-1-8m-extended-approx-4m-note-only-for-potentialfree-contact/): Cable with plug with 8 pins and screen for to connect the GR/I control box with a customer´s controller (alternatively to the hand operator).Cable length approx. 1.8m - extended approx. 4m.Note: only for potentialfree contacts. - [Hand Operator GR/I for 1-4 actuators SKU: 47519204](https://maedler.in/product/hand-operator-gr-i-for-1-4-actuators-sku-47519204/): Material: housing made of shock resistant black plastic. For use with actuators and control boxes GR/I. With one hand operator, 1-4 actuators can be oprated seperately. For control boxes with 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. To operate each actuator seperately. Protection class IP54. cable length approx. 2m. Actuators, control box and hand operator have to be ordered seperately. - [Hand Operator GR/I for 1-2 actuators SKU: 47519202](https://maedler.in/product/hand-operator-gr-i-for-1-2-actuators-sku-47519202/): Material: housing made of shock resistant black plastic. For use with actuators and control boxes GR/I. With one hand operator, 1-4 actuators can be oprated seperately. For control boxes with 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. To operate each actuator seperately. Protection class IP54. cable length approx. 2m. Actuators, control box and hand operator have to be ordered seperately. - [Hand Operator GR/I for 1 actuator SKU: 47519201](https://maedler.in/product/hand-operator-gr-i-for-1-actuator-sku-47519201/): Material: housing made of shock resistant black plastic. For use with actuators and control boxes GR/I. With one hand operator, 1-4 actuators can be oprated seperately. For control boxes with 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. To operate each actuator seperately. Protection class IP54. cable length approx. 2m. Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 24V DC output 24V DC for 1-4 actuators SKU: 47519114](https://maedler.in/product/control-box-gr-i-input-24v-dc-output-24v-dc-for-1-4-actuators-sku-47519114/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 24V DC output 24V DC for 1-2 actuators SKU: 47519112](https://maedler.in/product/control-box-gr-i-input-24v-dc-output-24v-dc-for-1-2-actuators-sku-47519112/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 24V DC output 24V DC for 1 actuator SKU: 47519111](https://maedler.in/product/control-box-gr-i-input-24v-dc-output-24v-dc-for-1-actuator-sku-47519111/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Control Box GR/I input 230V AC output 24V DC for 1-4 actuators with IEC power cord length 3 m SKU: 47519014](https://maedler.in/product/control-box-gr-i-input-230v-ac-output-24v-dc-for-1-4-actuators-with-iec-power-cord-length-3-m-sku-47519014/): Material: Housing made of shock resistant black plastic. For use with actuators and hand operators GR/I. Voltage 24V DC or 230V AC. For 1 actuator, 1-2 actuators or 1-4 actuators. Limit switch and overload protection integrated. Protection class IP54. cable length approx. 0.5 m (24V) or IEC power cord, 3 m (230V). Actuators, control box and hand operator have to be ordered seperately. - [Sprocket KRT 16 B-1 1"x17.02mm 13 teeth material steel for taper bush type 1610 SKU: 10877113](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-13-teeth-material-steel-for-taper-bush-type-1610-sku-10877113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 114 teeth, material steel SKU: 10828800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-114-teeth-material-steel-sku-10828800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 95 teeth material steel SKU: 10828300](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-95-teeth-material-steel-sku-10828300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 80 teeth material steel SKU: 10828000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-80-teeth-material-steel-sku-10828000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 76 teeth material steel SKU: 10827600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-76-teeth-material-steel-sku-10827600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 70 teeth material steel SKU: 10827000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-70-teeth-material-steel-sku-10827000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 60 teeth material steel SKU: 10826000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-60-teeth-material-steel-sku-10826000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 57 teeth material steel SKU: 10825700](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-57-teeth-material-steel-sku-10825700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 54 teeth material steel SKU: 10825400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-54-teeth-material-steel-sku-10825400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 50 teeth material steel SKU: 10825000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-50-teeth-material-steel-sku-10825000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 48 teeth material steel SKU: 10824800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-48-teeth-material-steel-sku-10824800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 45 teeth material steel SKU: 10824500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-45-teeth-material-steel-sku-10824500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 44 teeth material steel SKU: 10824400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-44-teeth-material-steel-sku-10824400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 42 teeth material steel SKU: 10824200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-42-teeth-material-steel-sku-10824200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 40 teeth material steel SKU: 10824000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-40-teeth-material-steel-sku-10824000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 38 teeth material steel SKU: 10823800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-38-teeth-material-steel-sku-10823800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 36 teeth material steel SKU: 10823600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-36-teeth-material-steel-sku-10823600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 35 teeth material steel SKU: 10823500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-35-teeth-material-steel-sku-10823500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 34 teeth material steel SKU: 10823400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-34-teeth-material-steel-sku-10823400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 32 teeth material steel SKU: 10823200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-32-teeth-material-steel-sku-10823200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 30 teeth material steel SKU: 10823000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-30-teeth-material-steel-sku-10823000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 28 teeth material steel SKU: 10822800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-28-teeth-material-steel-sku-10822800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 27 teeth material steel SKU: 10822700](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-27-teeth-material-steel-sku-10822700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 26 teeth material steel SKU: 10822600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-26-teeth-material-steel-sku-10822600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 25 teeth material steel SKU: 10822500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-25-teeth-material-steel-sku-10822500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 24 teeth material steel SKU: 10822400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-24-teeth-material-steel-sku-10822400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 23 teeth material steel SKU: 10822300](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-23-teeth-material-steel-sku-10822300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 22 teeth material steel SKU: 10822200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-22-teeth-material-steel-sku-10822200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 21 teeth material steel SKU: 10822100](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-21-teeth-material-steel-sku-10822100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 20 teeth material steel SKU: 10822000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-20-teeth-material-steel-sku-10822000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 19 teeth material steel SKU: 10821900](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-19-teeth-material-steel-sku-10821900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 18 teeth material steel SKU: 10821800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-18-teeth-material-steel-sku-10821800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 17 teeth material steel SKU: 10821700](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-17-teeth-material-steel-sku-10821700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 16 teeth material steel SKU: 10821600](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-16-teeth-material-steel-sku-10821600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 15 teeth material steel SKU: 10821500](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-15-teeth-material-steel-sku-10821500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 14 teeth material steel SKU: 10821400](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-14-teeth-material-steel-sku-10821400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 13 teeth material steel SKU: 10821300](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-13-teeth-material-steel-sku-10821300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 12 teeth material steel SKU: 10821200](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-12-teeth-material-steel-sku-10821200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 11 teeth material steel SKU: 10821100](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-11-teeth-material-steel-sku-10821100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 10 teeth material steel SKU: 10821000](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-10-teeth-material-steel-sku-10821000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 9 teeth material steel SKU: 10820900](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-9-teeth-material-steel-sku-10820900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 16 B-1 1"x17,02mm 8 teeth material steel SKU: 10820800](https://maedler.in/product/plate-wheel-krl-without-hub-16-b-1-1x1702mm-8-teeth-material-steel-sku-10820800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 114 teeth material cast iron SKU: 10818800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-114-teeth-material-cast-iron-sku-10818800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 95 teeth material cast iron SKU: 10818300](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-95-teeth-material-cast-iron-sku-10818300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 76 teeth material cast iron SKU: 10817600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-76-teeth-material-cast-iron-sku-10817600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 57 teeth material cast iron SKU: 10815700](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-57-teeth-material-cast-iron-sku-10815700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 45 teeth material cast iron SKU: 10814500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-45-teeth-material-cast-iron-sku-10814500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 38 teeth material steel SKU: 10813800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-38-teeth-material-steel-sku-10813800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 36 teeth material steel SKU: 10813600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-36-teeth-material-steel-sku-10813600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 35 teeth material steel SKU: 10813500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-35-teeth-material-steel-sku-10813500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 34 teeth material steel SKU: 10813400](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-34-teeth-material-steel-sku-10813400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 32 teeth material steel SKU: 10813200](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-32-teeth-material-steel-sku-10813200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 30 teeth material steel SKU: 10813000](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-30-teeth-material-steel-sku-10813000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 28 teeth material steel SKU: 10812800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-28-teeth-material-steel-sku-10812800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 27 teeth material steel SKU: 10812700](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-27-teeth-material-steel-sku-10812700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 26 teeth material steel SKU: 10812600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-26-teeth-material-steel-sku-10812600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 25 teeth material steel SKU: 10812500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-25-teeth-material-steel-sku-10812500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 24 teeth material steel SKU: 10812400](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-24-teeth-material-steel-sku-10812400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 23 teeth material steel SKU: 10812300](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-23-teeth-material-steel-sku-10812300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 22 teeth material steel SKU: 10812200](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-22-teeth-material-steel-sku-10812200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 21 teeth material steel SKU: 10812100](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-21-teeth-material-steel-sku-10812100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 20 teeth material steel SKU: 10812000](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-20-teeth-material-steel-sku-10812000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 19 teeth material steel SKU: 10811900](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-19-teeth-material-steel-sku-10811900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 18 teeth material steel SKU: 10811800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-18-teeth-material-steel-sku-10811800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 17 teeth material steel SKU: 10811700](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-17-teeth-material-steel-sku-10811700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 16 teeth material steel SKU: 10811600](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-16-teeth-material-steel-sku-10811600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 15 teeth material steel SKU: 10811500](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-15-teeth-material-steel-sku-10811500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 14 teeth material steel SKU: 10811400](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-14-teeth-material-steel-sku-10811400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 13 teeth material steel SKU: 10811300](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-13-teeth-material-steel-sku-10811300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 12 teeth material steel SKU: 10811200](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-12-teeth-material-steel-sku-10811200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 11 teeth material steel SKU: 10811100](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-11-teeth-material-steel-sku-10811100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 10 teeth material steel SKU: 10811000](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-10-teeth-material-steel-sku-10811000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 9 teeth material steel SKU: 10810900](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-9-teeth-material-steel-sku-10810900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRS with hub 16 B-1 1"x17,02mm 8 teeth material steel SKU: 10810800](https://maedler.in/product/sprocket-krs-with-hub-16-b-1-1x1702mm-8-teeth-material-steel-sku-10810800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm.Other dimensions: See the table. - [Sprocket KRR with hub pitch 3/4x7/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799130](https://maedler.in/product/sprocket-krr-with-hub-pitch-3-4x7-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799125](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799124](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799123](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799122](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799121](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799120](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799119](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799118](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799117](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799116](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799115](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799114](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799113](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRR with hub 12 B-1 3/4x7/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10799112](https://maedler.in/product/sprocket-krr-with-hub-12-b-1-3-4x7-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10799112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 11,1 mm, c = 2 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 40 teeth material steel teeth induction hardened SKU: 10788140](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-40-teeth-material-steel-teeth-induction-hardened-sku-10788140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 38 teeth material steel teeth induction hardened SKU: 10788138](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-38-teeth-material-steel-teeth-induction-hardened-sku-10788138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 36 teeth material steel teeth induction hardened SKU: 10788136](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-36-teeth-material-steel-teeth-induction-hardened-sku-10788136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 35 teeth material steel teeth induction hardened SKU: 10788135](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-35-teeth-material-steel-teeth-induction-hardened-sku-10788135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 34 teeth material steel teeth induction hardened SKU: 10788134](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-34-teeth-material-steel-teeth-induction-hardened-sku-10788134/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 32 teeth material steel teeth induction hardened SKU: 10788132](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-32-teeth-material-steel-teeth-induction-hardened-sku-10788132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 30 teeth material steel teeth induction hardened SKU: 10788130](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-30-teeth-material-steel-teeth-induction-hardened-sku-10788130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 28 teeth material steel teeth induction hardened SKU: 10788128](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-28-teeth-material-steel-teeth-induction-hardened-sku-10788128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 27 teeth material steel teeth induction hardened SKU: 10788127](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-27-teeth-material-steel-teeth-induction-hardened-sku-10788127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 26 teeth material steel teeth induction hardened SKU: 10788126](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-26-teeth-material-steel-teeth-induction-hardened-sku-10788126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Sprocket KRG with hub 12 B-1 3/4x7/16" 25 teeth material steel teeth induction hardened SKU: 10788125](https://maedler.in/product/sprocket-krg-with-hub-12-b-1-3-4x7-16-25-teeth-material-steel-teeth-induction-hardened-sku-10788125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 11,1 mm, c = 2,0 mm, r3 = 19 mm. Other dimensions: See the table. - [Slide set DZ 3932 EC Slide length 400mm zinc plated SKU: 64904440](https://maedler.in/product/slide-set-dz-3932-ec-slide-length-400mm-zinc-plated-sku-64904440/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Self Close.• Fast disconnection.• Hold-in in closed position.• Service life 50,000 cycles.• Temperature range: -10°C to +40°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. The load capacity was tested at a slide spacing of 450mm. For optimal performance, the construct drawer width must be 27 mm less than the cabinet opening width.* Not available for slide length 300 mm.** Not available for slide length 350 mm.*** Not available for slide length 400 mm. - [Slide set DZ 3932 EC Slide length 350mm zinc plated SKU: 64904435](https://maedler.in/product/slide-set-dz-3932-ec-slide-length-350mm-zinc-plated-sku-64904435/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Self Close.• Fast disconnection.• Hold-in in closed position.• Service life 50,000 cycles.• Temperature range: -10°C to +40°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. The load capacity was tested at a slide spacing of 450mm. For optimal performance, the construct drawer width must be 27 mm less than the cabinet opening width.* Not available for slide length 300 mm.** Not available for slide length 350 mm.*** Not available for slide length 400 mm. - [Slide set DZ 3932 EC Slide length 300mm zinc plated SKU: 64904430](https://maedler.in/product/slide-set-dz-3932-ec-slide-length-300mm-zinc-plated-sku-64904430/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Self Close.• Fast disconnection.• Hold-in in closed position.• Service life 50,000 cycles.• Temperature range: -10°C to +40°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. The load capacity was tested at a slide spacing of 450mm. For optimal performance, the construct drawer width must be 27 mm less than the cabinet opening width.* Not available for slide length 300 mm.** Not available for slide length 350 mm.*** Not available for slide length 400 mm. - [Slide set DZ 3932 Slide length 700mm zinc plated SKU: 64904370](https://maedler.in/product/slide-set-dz-3932-slide-length-700mm-zinc-plated-sku-64904370/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 3932 Slide length 650mm zinc plated SKU: 64904365](https://maedler.in/product/slide-set-dz-3932-slide-length-650mm-zinc-plated-sku-64904365/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 3932 Slide length 600mm zinc plated SKU: 64904360](https://maedler.in/product/slide-set-dz-3932-slide-length-600mm-zinc-plated-sku-64904360/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 3932 Slide length 550mm zinc plated SKU: 64904355](https://maedler.in/product/slide-set-dz-3932-slide-length-550mm-zinc-plated-sku-64904355/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 3932 Slide length 500mm zinc plated SKU: 64904350](https://maedler.in/product/slide-set-dz-3932-slide-length-500mm-zinc-plated-sku-64904350/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 3932 Slide length 450mm zinc plated SKU: 64904345](https://maedler.in/product/slide-set-dz-3932-slide-length-450mm-zinc-plated-sku-64904345/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 3932 Slide length 400mm zinc plated SKU: 64904340](https://maedler.in/product/slide-set-dz-3932-slide-length-400mm-zinc-plated-sku-64904340/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 3932 Slide length 350mm zinc plated SKU: 64904335](https://maedler.in/product/slide-set-dz-3932-slide-length-350mm-zinc-plated-sku-64904335/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 3932 Slide length 300mm zinc plated SKU: 64904330](https://maedler.in/product/slide-set-dz-3932-slide-length-300mm-zinc-plated-sku-64904330/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 3932 Slide length 250mm zinc plated SKU: 64904325](https://maedler.in/product/slide-set-dz-3932-slide-length-250mm-zinc-plated-sku-64904325/): Material: Slide elements: Cold rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic precision ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast Disconnect.• Hold-in in the closed position.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. - [Slide set DZ 5321 SC slide length 790mm zinc plated SKU: 64904280](https://maedler.in/product/slide-set-dz-5321-sc-slide-length-790mm-zinc-plated-sku-64904280/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Hold-in in closed position. Bracket Mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 042 30, Slides 5321 SC - [Slide set DZ 5321 SC slide length 700mm zinc plated SKU: 64904270](https://maedler.in/product/slide-set-dz-5321-sc-slide-length-700mm-zinc-plated-sku-64904270/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Hold-in in closed position. Bracket Mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 042 30, Slides 5321 SC - [Slide set DZ 5321 SC slide length 600mm zinc plated SKU: 64904260](https://maedler.in/product/slide-set-dz-5321-sc-slide-length-600mm-zinc-plated-sku-64904260/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Hold-in in closed position. Bracket Mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 042 30, Slides 5321 SC - [Slide set DZ 5321 SC slide length 550mm zinc plated SKU: 64904255](https://maedler.in/product/slide-set-dz-5321-sc-slide-length-550mm-zinc-plated-sku-64904255/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Hold-in in closed position. Bracket Mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 042 30, Slides 5321 SC - [Slide set DZ 5321 SC slide length 500mm zinc plated SKU: 64904250](https://maedler.in/product/slide-set-dz-5321-sc-slide-length-500mm-zinc-plated-sku-64904250/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Hold-in in closed position. Bracket Mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 042 30, Slides 5321 SC - [Slide set DZ 5321 SC slide length 450mm zinc plated SKU: 64904245](https://maedler.in/product/slide-set-dz-5321-sc-slide-length-450mm-zinc-plated-sku-64904245/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Hold-in in closed position. Bracket Mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 042 30, Slides 5321 SC - [Slide set DZ 5321 SC slide length 400mm zinc plated SKU: 64904240](https://maedler.in/product/slide-set-dz-5321-sc-slide-length-400mm-zinc-plated-sku-64904240/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Hold-in in closed position. Bracket Mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 042 30, Slides 5321 SC - [Slide set DZ 5321 SC slide length 350mm zinc plated SKU: 64904235](https://maedler.in/product/slide-set-dz-5321-sc-slide-length-350mm-zinc-plated-sku-64904235/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Hold-in in closed position. Bracket Mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 042 30, Slides 5321 SC - [Slide set DZ 5321 SC slide length 300mm zinc plated SKU: 64904230](https://maedler.in/product/slide-set-dz-5321-sc-slide-length-300mm-zinc-plated-sku-64904230/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Hold-in in closed position. Bracket Mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 042 30, Slides 5321 SC - [Slide set DZ 5321 slide length 1000mm zinc plated SKU: 64904099](https://maedler.in/product/slide-set-dz-5321-slide-length-1000mm-zinc-plated-sku-64904099/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 900mm zinc plated SKU: 64904090](https://maedler.in/product/slide-set-dz-5321-slide-length-900mm-zinc-plated-sku-64904090/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 790mm zinc plated SKU: 64904080](https://maedler.in/product/slide-set-dz-5321-slide-length-790mm-zinc-plated-sku-64904080/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 700mm zinc plated SKU: 64904070](https://maedler.in/product/slide-set-dz-5321-slide-length-700mm-zinc-plated-sku-64904070/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 600mm zinc plated SKU: 64904060](https://maedler.in/product/slide-set-dz-5321-slide-length-600mm-zinc-plated-sku-64904060/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 550mm zinc plated SKU: 64904055](https://maedler.in/product/slide-set-dz-5321-slide-length-550mm-zinc-plated-sku-64904055/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 500mm zinc plated SKU: 64904050](https://maedler.in/product/slide-set-dz-5321-slide-length-500mm-zinc-plated-sku-64904050/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 450mm zinc plated SKU: 64904045](https://maedler.in/product/slide-set-dz-5321-slide-length-450mm-zinc-plated-sku-64904045/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 400mm zinc plated SKU: 64904040](https://maedler.in/product/slide-set-dz-5321-slide-length-400mm-zinc-plated-sku-64904040/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 350mm zinc plated SKU: 64904035](https://maedler.in/product/slide-set-dz-5321-slide-length-350mm-zinc-plated-sku-64904035/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 300mm zinc plated SKU: 64904030](https://maedler.in/product/slide-set-dz-5321-slide-length-300mm-zinc-plated-sku-64904030/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 5321 slide length 1100mm zinc plated SKU: 64904011](https://maedler.in/product/slide-set-dz-5321-slide-length-1100mm-zinc-plated-sku-64904011/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Attention: Vertical mounting only. Ordering details: e.g.: Product no. 649 040 30, Slides 5321 - [Slide set DZ 7957 slide length 914.4mm zinc plated SKU: 64903936](https://maedler.in/product/slide-set-dz-7957-slide-length-914-4mm-zinc-plated-sku-64903936/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 863.6mm zinc plated SKU: 64903934](https://maedler.in/product/slide-set-dz-7957-slide-length-863-6mm-zinc-plated-sku-64903934/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 812.8mm zinc plated SKU: 64903932](https://maedler.in/product/slide-set-dz-7957-slide-length-812-8mm-zinc-plated-sku-64903932/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 762.0mm zinc plated SKU: 64903930](https://maedler.in/product/slide-set-dz-7957-slide-length-762-0mm-zinc-plated-sku-64903930/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 711.2mm zinc plated SKU: 64903928](https://maedler.in/product/slide-set-dz-7957-slide-length-711-2mm-zinc-plated-sku-64903928/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 660.4mm zinc plated SKU: 64903926](https://maedler.in/product/slide-set-dz-7957-slide-length-660-4mm-zinc-plated-sku-64903926/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 609.6mm zinc plated SKU: 64903924](https://maedler.in/product/slide-set-dz-7957-slide-length-609-6mm-zinc-plated-sku-64903924/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 558.8mm zinc plated SKU: 64903922](https://maedler.in/product/slide-set-dz-7957-slide-length-558-8mm-zinc-plated-sku-64903922/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 508.0mm zinc plated SKU: 64903920](https://maedler.in/product/slide-set-dz-7957-slide-length-508-0mm-zinc-plated-sku-64903920/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 457.2mm zinc plated SKU: 64903918](https://maedler.in/product/slide-set-dz-7957-slide-length-457-2mm-zinc-plated-sku-64903918/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 406.4mm zinc plated SKU: 64903916](https://maedler.in/product/slide-set-dz-7957-slide-length-406-4mm-zinc-plated-sku-64903916/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 355.6mm zinc plated SKU: 64903914](https://maedler.in/product/slide-set-dz-7957-slide-length-355-6mm-zinc-plated-sku-64903914/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 7957 slide length 304.8mm zinc plated SKU: 64903912](https://maedler.in/product/slide-set-dz-7957-slide-length-304-8mm-zinc-plated-sku-64903912/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Suitable for drawers up to 1000mm wide at high load.Fast disconnect. Optional Clip-On Brackets.Very high service life up to 80,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DZ 3607 slide length 711mm zinc plated SKU: 64903828](https://maedler.in/product/slide-set-dz-3607-slide-length-711mm-zinc-plated-sku-64903828/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607 - [Slide set DZ 3607 slide length 660mm zinc plated SKU: 64903826](https://maedler.in/product/slide-set-dz-3607-slide-length-660mm-zinc-plated-sku-64903826/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607 - [Slide set DZ 3607 slide length 610mm zinc plated SKU: 64903824](https://maedler.in/product/slide-set-dz-3607-slide-length-610mm-zinc-plated-sku-64903824/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607 - [Slide set DZ 3607 slide length 559mm zinc plated SKU: 64903822](https://maedler.in/product/slide-set-dz-3607-slide-length-559mm-zinc-plated-sku-64903822/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607 - [Slide set DZ 3607 slide length 508mm zinc plated SKU: 64903820](https://maedler.in/product/slide-set-dz-3607-slide-length-508mm-zinc-plated-sku-64903820/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607 - [Slide set DZ 3607 slide length 457mm zinc plated SKU: 64903818](https://maedler.in/product/slide-set-dz-3607-slide-length-457mm-zinc-plated-sku-64903818/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607 - [Slide set DZ 3607 slide length 406mm zinc plated SKU: 64903816](https://maedler.in/product/slide-set-dz-3607-slide-length-406mm-zinc-plated-sku-64903816/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607 - [Slide set DZ 3607 slide length 356mm zinc plated SKU: 64903814](https://maedler.in/product/slide-set-dz-3607-slide-length-356mm-zinc-plated-sku-64903814/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607 - [Slide set DZ 3607 slide length 305mm zinc plated SKU: 64903812](https://maedler.in/product/slide-set-dz-3607-slide-length-305mm-zinc-plated-sku-64903812/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-out in open position. Fast disconnection. Mountings included. Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 038 12, Slides 3607 - [Slide set DZ 5321 EC slide length 1000mm zinc plated SKU: 64903799](https://maedler.in/product/slide-set-dz-5321-ec-slide-length-1000mm-zinc-plated-sku-64903799/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [Slide set DZ 5321 EC slide length 900mm zinc plated SKU: 64903790](https://maedler.in/product/slide-set-dz-5321-ec-slide-length-900mm-zinc-plated-sku-64903790/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [2400 SKU: 64903780](https://maedler.in/product/2400-sku-64903780/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [Slide set DZ 5321 EC slide length 700mm zinc plated SKU: 64903770](https://maedler.in/product/slide-set-dz-5321-ec-slide-length-700mm-zinc-plated-sku-64903770/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [Slide set DZ 5321 EC slide length 600mm zinc plated SKU: 64903760](https://maedler.in/product/slide-set-dz-5321-ec-slide-length-600mm-zinc-plated-sku-64903760/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [Slide set DZ 5321 EC slide length 550mm zinc plated SKU: 64903755](https://maedler.in/product/slide-set-dz-5321-ec-slide-length-550mm-zinc-plated-sku-64903755/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [Slide set DZ 5321 EC slide length 500mm zinc plated SKU: 64903750](https://maedler.in/product/slide-set-dz-5321-ec-slide-length-500mm-zinc-plated-sku-64903750/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [Slide set DZ 5321 EC slide length 450mm zinc plated SKU: 64903745](https://maedler.in/product/slide-set-dz-5321-ec-slide-length-450mm-zinc-plated-sku-64903745/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [Slide set DZ 5321 EC slide length 400mm zinc plated SKU: 64903740](https://maedler.in/product/slide-set-dz-5321-ec-slide-length-400mm-zinc-plated-sku-64903740/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [Slide set DZ 5321 EC slide length 1100mm zinc plated SKU: 64903711](https://maedler.in/product/slide-set-dz-5321-ec-slide-length-1100mm-zinc-plated-sku-64903711/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Self-close. Suitable for drawers up to 1000mm wide at high load. Service life 80,000 cycles. Temperature range: -10°C to +40°C. Opening force 26N +/-5N.* at drawer width 450mm / 1000mm. - [Slide set DS 3031 slide length 700mm stainless steel SKU: 64903570](https://maedler.in/product/slide-set-ds-3031-slide-length-700mm-stainless-steel-sku-64903570/): Material: Stainless steel 1.4301 (AISI 304). Telescopic ball bearing slides for applications in the industrial sector. Sold by pair (1 x product no. = 1 pair of slides). High temperatur food-grade grease. Suitable for temperature up to +300°C. Ideal for environments where mild steel might corrode. Service life 10,000 cycles. Temperature range: -20°C to +300°C. - [Slide set DS 3031 slide length 650mm stainless steel SKU: 64903565](https://maedler.in/product/slide-set-ds-3031-slide-length-650mm-stainless-steel-sku-64903565/): Material: Stainless steel 1.4301 (AISI 304). Telescopic ball bearing slides for applications in the industrial sector. Sold by pair (1 x product no. = 1 pair of slides). High temperatur food-grade grease. Suitable for temperature up to +300°C. Ideal for environments where mild steel might corrode. Service life 10,000 cycles. Temperature range: -20°C to +300°C. - [Slide set DS 3031 slide length 600mm stainless steel SKU: 64903560](https://maedler.in/product/slide-set-ds-3031-slide-length-600mm-stainless-steel-sku-64903560/): Material: Stainless steel 1.4301 (AISI 304). Telescopic ball bearing slides for applications in the industrial sector. Sold by pair (1 x product no. = 1 pair of slides). High temperatur food-grade grease. Suitable for temperature up to +300°C. Ideal for environments where mild steel might corrode. Service life 10,000 cycles. Temperature range: -20°C to +300°C. - [Slide set DS 3031 slide length 550mm stainless steel SKU: 64903555](https://maedler.in/product/slide-set-ds-3031-slide-length-550mm-stainless-steel-sku-64903555/): Material: Stainless steel 1.4301 (AISI 304). Telescopic ball bearing slides for applications in the industrial sector. Sold by pair (1 x product no. = 1 pair of slides). High temperatur food-grade grease. Suitable for temperature up to +300°C. Ideal for environments where mild steel might corrode. Service life 10,000 cycles. Temperature range: -20°C to +300°C. - [Slide set DS 3031 slide length 500mm stainless steel SKU: 64903550](https://maedler.in/product/slide-set-ds-3031-slide-length-500mm-stainless-steel-sku-64903550/): Material: Stainless steel 1.4301 (AISI 304). Telescopic ball bearing slides for applications in the industrial sector. Sold by pair (1 x product no. = 1 pair of slides). High temperatur food-grade grease. Suitable for temperature up to +300°C. Ideal for environments where mild steel might corrode. Service life 10,000 cycles. Temperature range: -20°C to +300°C. - [Slide set DS 3031 slide length 450mm stainless steel SKU: 64903545](https://maedler.in/product/slide-set-ds-3031-slide-length-450mm-stainless-steel-sku-64903545/): Material: Stainless steel 1.4301 (AISI 304). Telescopic ball bearing slides for applications in the industrial sector. Sold by pair (1 x product no. = 1 pair of slides). High temperatur food-grade grease. Suitable for temperature up to +300°C. Ideal for environments where mild steel might corrode. Service life 10,000 cycles. Temperature range: -20°C to +300°C. - [Slide set DS 3031 slide length 400mm stainless steel SKU: 64903540](https://maedler.in/product/slide-set-ds-3031-slide-length-400mm-stainless-steel-sku-64903540/): Material: Stainless steel 1.4301 (AISI 304). Telescopic ball bearing slides for applications in the industrial sector. Sold by pair (1 x product no. = 1 pair of slides). High temperatur food-grade grease. Suitable for temperature up to +300°C. Ideal for environments where mild steel might corrode. Service life 10,000 cycles. Temperature range: -20°C to +300°C. - [Slide set DS 3031 slide length 350mm stainless steel SKU: 64903535](https://maedler.in/product/slide-set-ds-3031-slide-length-350mm-stainless-steel-sku-64903535/): Material: Stainless steel 1.4301 (AISI 304). Telescopic ball bearing slides for applications in the industrial sector. Sold by pair (1 x product no. = 1 pair of slides). High temperatur food-grade grease. Suitable for temperature up to +300°C. Ideal for environments where mild steel might corrode. Service life 10,000 cycles. Temperature range: -20°C to +300°C. - [Slide set DS 3031 slide length 300mm stainless steel SKU: 64903530](https://maedler.in/product/slide-set-ds-3031-slide-length-300mm-stainless-steel-sku-64903530/): Material: Stainless steel 1.4301 (AISI 304). Telescopic ball bearing slides for applications in the industrial sector. Sold by pair (1 x product no. = 1 pair of slides). High temperatur food-grade grease. Suitable for temperature up to +300°C. Ideal for environments where mild steel might corrode. Service life 10,000 cycles. Temperature range: -20°C to +300°C. - [Slide set DZ 0301 slide length 711mm zinc plated SKU: 64903428](https://maedler.in/product/slide-set-dz-0301-slide-length-711mm-zinc-plated-sku-64903428/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 034 12, Slides 0301 - [Slide set DZ 0301 slide length 660mm zinc plated SKU: 64903426](https://maedler.in/product/slide-set-dz-0301-slide-length-660mm-zinc-plated-sku-64903426/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 034 12, Slides 0301 - [Slide set DZ 0301 slide length 610mm zinc plated SKU: 64903424](https://maedler.in/product/slide-set-dz-0301-slide-length-610mm-zinc-plated-sku-64903424/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 034 12, Slides 0301 - [Slide set DZ 0301 slide length 559mm zinc plated SKU: 64903422](https://maedler.in/product/slide-set-dz-0301-slide-length-559mm-zinc-plated-sku-64903422/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 034 12, Slides 0301 - [Slide set DZ 0301 slide length 508mm zinc plated SKU: 64903420](https://maedler.in/product/slide-set-dz-0301-slide-length-508mm-zinc-plated-sku-64903420/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 034 12, Slides 0301 - [Slide set DZ 0301 slide length 457mm zinc plated SKU: 64903418](https://maedler.in/product/slide-set-dz-0301-slide-length-457mm-zinc-plated-sku-64903418/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 034 12, Slides 0301 - [Slide set DZ 0301 slide length 406mm zinc plated SKU: 64903416](https://maedler.in/product/slide-set-dz-0301-slide-length-406mm-zinc-plated-sku-64903416/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 034 12, Slides 0301 - [Slide set DZ 0301 slide length 356mm zinc plated SKU: 64903414](https://maedler.in/product/slide-set-dz-0301-slide-length-356mm-zinc-plated-sku-64903414/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 034 12, Slides 0301 - [Slide set DZ 0301 slide length 305mm zinc plated SKU: 64903412](https://maedler.in/product/slide-set-dz-0301-slide-length-305mm-zinc-plated-sku-64903412/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Low slide profile (only 35.3mm). Bracket mount for electrical cabinets on request. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 034 12, Slides 0301 - [Slide set DS 3557 slide length 660mm stainless steel 1.4301 SKU: 64903365](https://maedler.in/product/slide-set-ds-3557-slide-length-660mm-stainless-steel-1-4301-sku-64903365/): Material: Stainless steel 1.4301. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Locks in open position. Fast disconnection. Pinch free disconnect for easy drawer removal. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 3557 slide length 610mm stainless steel 1.4301 SKU: 64903360](https://maedler.in/product/slide-set-ds-3557-slide-length-610mm-stainless-steel-1-4301-sku-64903360/): Material: Stainless steel 1.4301. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Locks in open position. Fast disconnection. Pinch free disconnect for easy drawer removal. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 3557 slide length 559mm stainless steel 1.4301 SKU: 64903355](https://maedler.in/product/slide-set-ds-3557-slide-length-559mm-stainless-steel-1-4301-sku-64903355/): Material: Stainless steel 1.4301. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Locks in open position. Fast disconnection. Pinch free disconnect for easy drawer removal. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 3557 slide length 508mm stainless steel 1.4301 SKU: 64903350](https://maedler.in/product/slide-set-ds-3557-slide-length-508mm-stainless-steel-1-4301-sku-64903350/): Material: Stainless steel 1.4301. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Locks in open position. Fast disconnection. Pinch free disconnect for easy drawer removal. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 3557 slide length 457mm stainless steel 1.4301 SKU: 64903345](https://maedler.in/product/slide-set-ds-3557-slide-length-457mm-stainless-steel-1-4301-sku-64903345/): Material: Stainless steel 1.4301. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Locks in open position. Fast disconnection. Pinch free disconnect for easy drawer removal. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 3557 slide length 406mm stainless steel 1.4301 SKU: 64903340](https://maedler.in/product/slide-set-ds-3557-slide-length-406mm-stainless-steel-1-4301-sku-64903340/): Material: Stainless steel 1.4301. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Locks in open position. Fast disconnection. Pinch free disconnect for easy drawer removal. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 3557 slide length 356mm stainless steel 1.4301 SKU: 64903335](https://maedler.in/product/slide-set-ds-3557-slide-length-356mm-stainless-steel-1-4301-sku-64903335/): Material: Stainless steel 1.4301. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Locks in open position. Fast disconnection. Pinch free disconnect for easy drawer removal. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 3557 slide length 305mm stainless steel 1.4301 SKU: 64903330](https://maedler.in/product/slide-set-ds-3557-slide-length-305mm-stainless-steel-1-4301-sku-64903330/): Material: Stainless steel 1.4301. Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides). Locks in open position. Fast disconnection. Pinch free disconnect for easy drawer removal. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 3308 slide length 711mm zinc plated SKU: 64903228](https://maedler.in/product/slide-set-dz-3308-slide-length-711mm-zinc-plated-sku-64903228/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-in in closed position. Lock-out in open position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 032 12, Slides 3308 - [Slide set DZ 3308 slide length 660mm zinc plated SKU: 64903226](https://maedler.in/product/slide-set-dz-3308-slide-length-660mm-zinc-plated-sku-64903226/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-in in closed position. Lock-out in open position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 032 12, Slides 3308 - [Slide set DZ 3308 slide length 610mm zinc plated SKU: 64903224](https://maedler.in/product/slide-set-dz-3308-slide-length-610mm-zinc-plated-sku-64903224/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-in in closed position. Lock-out in open position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 032 12, Slides 3308 - [Slide set DZ 3308 slide length 559mm zinc plated SKU: 64903222](https://maedler.in/product/slide-set-dz-3308-slide-length-559mm-zinc-plated-sku-64903222/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-in in closed position. Lock-out in open position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 032 12, Slides 3308 - [Slide set DZ 3308 slide length 508mm zinc plated SKU: 64903220](https://maedler.in/product/slide-set-dz-3308-slide-length-508mm-zinc-plated-sku-64903220/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-in in closed position. Lock-out in open position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 032 12, Slides 3308 - [Slide set DZ 3308 slide length 457mm zinc plated SKU: 64903218](https://maedler.in/product/slide-set-dz-3308-slide-length-457mm-zinc-plated-sku-64903218/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-in in closed position. Lock-out in open position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 032 12, Slides 3308 - [Slide set DZ 3308 slide length 406mm zinc plated SKU: 64903216](https://maedler.in/product/slide-set-dz-3308-slide-length-406mm-zinc-plated-sku-64903216/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-in in closed position. Lock-out in open position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 032 12, Slides 3308 - [Slide set DZ 3308 slide length 356mm zinc plated SKU: 64903214](https://maedler.in/product/slide-set-dz-3308-slide-length-356mm-zinc-plated-sku-64903214/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lock-in in closed position. Lock-out in open position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 032 12, Slides 3308 - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm shielded on both sides clearance C3 SKU: 6001-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-shielded-on-both-sides-clearance-c3-sku-6001-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm open (unsealed) SKU: 6001-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-open-unsealed-sku-6001-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm open (unsealed) clearance C3 SKU: 6001-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-open-unsealed-clearance-c3-sku-6001-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Clamp coupling (boc coupling) DIN 115 both sides bore 90mm with keyway material cast iron SKU: 60009000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-90mm-with-keyway-material-cast-iron-sku-60009000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 80mm with keyway material cast iron SKU: 60008000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-80mm-with-keyway-material-cast-iron-sku-60008000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 70mm with keyway material cast iron SKU: 60007000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-70mm-with-keyway-material-cast-iron-sku-60007000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 65mm with keyway material cast iron SKU: 60006500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-65mm-with-keyway-material-cast-iron-sku-60006500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 60mm with keyway material cast iron SKU: 60006000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-60mm-with-keyway-material-cast-iron-sku-60006000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 55mm with keyway material cast iron SKU: 60005500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-55mm-with-keyway-material-cast-iron-sku-60005500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 50mm with keyway material cast iron SKU: 60005000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-50mm-with-keyway-material-cast-iron-sku-60005000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 45mm with keyway material cast iron SKU: 60004500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-45mm-with-keyway-material-cast-iron-sku-60004500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 40mm with keyway material cast iron SKU: 60004000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-40mm-with-keyway-material-cast-iron-sku-60004000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 35mm with keyway material cast iron SKU: 60003500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-35mm-with-keyway-material-cast-iron-sku-60003500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 30mm with keyway material cast iron SKU: 60003000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-30mm-with-keyway-material-cast-iron-sku-60003000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 25mm with keyway material cast iron SKU: 60002500](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-25mm-with-keyway-material-cast-iron-sku-60002500/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [Clamp coupling (boc coupling) DIN 115 both sides bore 20mm with keyway material cast iron SKU: 60002000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-20mm-with-keyway-material-cast-iron-sku-60002000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm shielded on both sides SKU: 6000-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-sku-6000-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm shielded on both sides clearance C3 SKU: 6000-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-clearance-c3-sku-6000-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm sealed on both sides SKU: 6000-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-sku-6000-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm sealed on both sides SKU: 6000-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-sku-6000-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm sealed on both sides clearance C3 SKU: 6000-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-clearance-c3-sku-6000-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm sealed on both sides clearance C3 SKU: 6000-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-sealed-on-both-sides-clearance-c3-sku-6000-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm shielded on both sides SKU: 6000-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-sku-6000-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm shielded on both sides clearance C3 SKU: 6000-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-shielded-on-both-sides-clearance-c3-sku-6000-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm open (unsealed) SKU: 6000-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-open-unsealed-sku-6000-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 26mm width 8mm open (unsealed) clearance C3 SKU: 6000-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-26mm-width-8mm-open-unsealed-clearance-c3-sku-6000-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF single direction thrust ball bearing 51206 inner Ø 30mm outer Ø 52mm height 16mm SKU: 51206-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51206-inner-o-30mm-outer-o-52mm-height-16mm-sku-51206-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51206 inner Ø 30mm outer Ø 52mm height 16mm SKU: 51206-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51206-inner-o-30mm-outer-o-52mm-height-16mm-sku-51206-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51205 inner Ø 25mm outer Ø 47mm height 15mm SKU: 51205-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51205-inner-o-25mm-outer-o-47mm-height-15mm-sku-51205-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51205 inner Ø 25mm outer Ø 47mm height 15mm SKU: 51205-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51205-inner-o-25mm-outer-o-47mm-height-15mm-sku-51205-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51204 inner Ø 20mm outer Ø 40mm height 14mm SKU: 51204-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51204-inner-o-20mm-outer-o-40mm-height-14mm-sku-51204-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51204 inner Ø 20mm outer Ø 40mm height 14mm SKU: 51204-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51204-inner-o-20mm-outer-o-40mm-height-14mm-sku-51204-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51203 inner Ø 17mm outer Ø 35mm height 12mm SKU: 51203-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51203-inner-o-17mm-outer-o-35mm-height-12mm-sku-51203-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51203 inner Ø 17mm outer Ø 35mm height 12mm SKU: 51203-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51203-inner-o-17mm-outer-o-35mm-height-12mm-sku-51203-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51202 inner Ø 15mm outer Ø 32mm height 12mm SKU: 51202-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51202-inner-o-15mm-outer-o-32mm-height-12mm-sku-51202-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51202 inner Ø 15mm outer Ø 32mm height 12mm SKU: 51202-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51202-inner-o-15mm-outer-o-32mm-height-12mm-sku-51202-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51201 inner Ø 12mm outer Ø 28mm height 11mm SKU: 51201-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51201-inner-o-12mm-outer-o-28mm-height-11mm-sku-51201-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51201 inner Ø 12mm outer Ø 28mm height 11mm SKU: 51201-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51201-inner-o-12mm-outer-o-28mm-height-11mm-sku-51201-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51200 inner Ø 10mm outer Ø 26mm height 11mm SKU: 51200-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51200-inner-o-10mm-outer-o-26mm-height-11mm-sku-51200-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51200 inner Ø 10mm outer Ø 26mm height 11mm SKU: 51200-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51200-inner-o-10mm-outer-o-26mm-height-11mm-sku-51200-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51120 inner Ø 100mm outer Ø 135mm height 25mm SKU: 51120-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51120-inner-o-100mm-outer-o-135mm-height-25mm-sku-51120-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51120 inner Ø 100mm outer Ø 135mm height 25mm SKU: 51120-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51120-inner-o-100mm-outer-o-135mm-height-25mm-sku-51120-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51118 inner Ø 90mm outer Ø 120mm height 22mm SKU: 51118-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51118-inner-o-90mm-outer-o-120mm-height-22mm-sku-51118-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51118 inner Ø 90mm outer Ø 120mm height 22mm SKU: 51118-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51118-inner-o-90mm-outer-o-120mm-height-22mm-sku-51118-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51117 inner Ø 85mm outer Ø 110mm height 19mm SKU: 51117-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51117-inner-o-85mm-outer-o-110mm-height-19mm-sku-51117-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51117 inner Ø 85mm outer Ø 110mm height 19mm SKU: 51117-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51117-inner-o-85mm-outer-o-110mm-height-19mm-sku-51117-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51116 inner Ø 80mm outer Ø 105mm height 19mm SKU: 51116-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51116-inner-o-80mm-outer-o-105mm-height-19mm-sku-51116-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51116 inner Ø 80mm outer Ø 105mm height 19mm SKU: 51116-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51116-inner-o-80mm-outer-o-105mm-height-19mm-sku-51116-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51115 inner Ø 75mm outer Ø 100mm height 19mm SKU: 51115-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51115-inner-o-75mm-outer-o-100mm-height-19mm-sku-51115-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51115 inner Ø 75mm outer Ø 100mm height 19mm SKU: 51115-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51115-inner-o-75mm-outer-o-100mm-height-19mm-sku-51115-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51114 inner Ø 70mm outer Ø 95mm height 18mm SKU: 51114-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51114-inner-o-70mm-outer-o-95mm-height-18mm-sku-51114-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51114 inner Ø 70mm outer Ø 95mm height 18mm SKU: 51114-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51114-inner-o-70mm-outer-o-95mm-height-18mm-sku-51114-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51113 inner Ø 65mm outer Ø 90mm height 18mm SKU: 51113-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51113-inner-o-65mm-outer-o-90mm-height-18mm-sku-51113-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51113 inner Ø 65mm outer Ø 90mm height 18mm SKU: 51113-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51113-inner-o-65mm-outer-o-90mm-height-18mm-sku-51113-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51112 inner Ø 60mm outer Ø 85mm height 17mm SKU: 51112-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51112-inner-o-60mm-outer-o-85mm-height-17mm-sku-51112-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51112 inner Ø 60mm outer Ø 85mm height 17mm SKU: 51112-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51112-inner-o-60mm-outer-o-85mm-height-17mm-sku-51112-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51111 inner Ø 55mm outer Ø 78mm height 16mm SKU: 51111-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51111-inner-o-55mm-outer-o-78mm-height-16mm-sku-51111-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51111 inner Ø 55mm outer Ø 78mm height 16mm SKU: 51111-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51111-inner-o-55mm-outer-o-78mm-height-16mm-sku-51111-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51110 inner Ø 50mm outer Ø 70mm height 14mm SKU: 51110-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51110-inner-o-50mm-outer-o-70mm-height-14mm-sku-51110-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51110 inner Ø 50mm outer Ø 70mm height 14mm SKU: 51110-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51110-inner-o-50mm-outer-o-70mm-height-14mm-sku-51110-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51109 inner Ø 45mm outer Ø 65mm height 14mm SKU: 51109-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51109-inner-o-45mm-outer-o-65mm-height-14mm-sku-51109-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51109 inner Ø 45mm outer Ø 65mm height 14mm SKU: 51109-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51109-inner-o-45mm-outer-o-65mm-height-14mm-sku-51109-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51108 inner Ø 40mm outer Ø 60mm height 13mm SKU: 51108-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51108-inner-o-40mm-outer-o-60mm-height-13mm-sku-51108-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51108 inner Ø 40mm outer Ø 60mm height 13mm SKU: 51108-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51108-inner-o-40mm-outer-o-60mm-height-13mm-sku-51108-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51107 inner Ø 35mm outer Ø 52mm height 12mm SKU: 51107-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51107-inner-o-35mm-outer-o-52mm-height-12mm-sku-51107-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51107 inner Ø 35mm outer Ø 52mm height 12mm SKU: 51107-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51107-inner-o-35mm-outer-o-52mm-height-12mm-sku-51107-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51106 inner Ø 30mm outer Ø 47mm height 11mm SKU: 51106-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51106-inner-o-30mm-outer-o-47mm-height-11mm-sku-51106-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51106 inner Ø 30mm outer Ø 47mm height 11mm SKU: 51106-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51106-inner-o-30mm-outer-o-47mm-height-11mm-sku-51106-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51105 inner Ø 25mm outer Ø 42mm height 11mm SKU: 51105-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51105-inner-o-25mm-outer-o-42mm-height-11mm-sku-51105-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51105 inner Ø 25mm outer Ø 42mm height 11mm SKU: 51105-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51105-inner-o-25mm-outer-o-42mm-height-11mm-sku-51105-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51104 inner Ø 20mm outer Ø 35mm height 10mm SKU: 51104-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51104-inner-o-20mm-outer-o-35mm-height-10mm-sku-51104-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51104 inner Ø 20mm outer Ø 35mm height 10mm SKU: 51104-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51104-inner-o-20mm-outer-o-35mm-height-10mm-sku-51104-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51103 inner Ø 17mm outer Ø 30mm height 9mm SKU: 51103-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51103-inner-o-17mm-outer-o-30mm-height-9mm-sku-51103-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51103 inner Ø 17mm outer Ø 30mm height 9mm SKU: 51103-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51103-inner-o-17mm-outer-o-30mm-height-9mm-sku-51103-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51102 inner Ø 15mm outer Ø 28mm height 9mm SKU: 51102-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51102-inner-o-15mm-outer-o-28mm-height-9mm-sku-51102-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51102 inner Ø 15mm outer Ø 28mm height 9mm SKU: 51102-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51102-inner-o-15mm-outer-o-28mm-height-9mm-sku-51102-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51101 inner Ø 12mm outer Ø 26mm height 9mm SKU: 51101-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51101-inner-o-12mm-outer-o-26mm-height-9mm-sku-51101-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51101 inner Ø 12mm outer Ø 26mm height 9mm SKU: 51101-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51101-inner-o-12mm-outer-o-26mm-height-9mm-sku-51101-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [SKF single direction thrust ball bearing 51100 inner Ø 10mm outer Ø 24mm height 9mm SKU: 51100-SKF](https://maedler.in/product/skf-single-direction-thrust-ball-bearing-51100-inner-o-10mm-outer-o-24mm-height-9mm-sku-51100-skf/): Material: Bearing steel.Thrust Ball Bearings for single direction in premiumquality from SKF®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [single direction thrust ball bearing 51100 inner Ø 10mm outer Ø 24mm height 9mm SKU: 51100-MAE](https://maedler.in/product/single-direction-thrust-ball-bearing-51100-inner-o-10mm-outer-o-24mm-height-9mm-sku-51100-mae/): Material: Bearing steel.Thrust Ball Bearings for single direction in brand quality from MAEDLER®.For axial load (no radial load permitted).Usable for high speed.These bearings exist from lose parts: Shaft ring (with ground bore), housing ring (with ground outer diameter and bigger bore) and ball cage with balls. The rings must not be confused with each other.Temperature range: -30°C to +125°C. Other versions or sizes on request. - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 90B8/2 400V 50Hz shaft diameter 45mm i=55.7:1 SKU: 48324446](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-90b8-2-400v-50hz-shaft-diameter-45mm-i55-71-sku-48324446/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 80A8/2 400V 50Hz shaft diameter 45mm i=55.7:1 SKU: 48324346](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-80a8-2-400v-50hz-shaft-diameter-45mm-i55-71-sku-48324346/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 71A8/2 400V 50Hz shaft diameter 45mm i=166:1 SKU: 48324246](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-71a8-2-400v-50hz-shaft-diameter-45mm-i1661-sku-48324246/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 63A8/2 400V 50Hz shaft diameter 45mm i=156:1 SKU: 48324146](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-63a8-2-400v-50hz-shaft-diameter-45mm-i1561-sku-48324146/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 100A8/2 400V 50Hz shaft diameter 45mm i=25.3:1 SKU: 48323546](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-100a8-2-400v-50hz-shaft-diameter-45mm-i25-31-sku-48323546/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 100A8/2 400V 50Hz shaft diameter 45mm i=49:1 SKU: 48323446](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-100a8-2-400v-50hz-shaft-diameter-45mm-i491-sku-48323446/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 90B8/2 400V 50Hz shaft diameter 45mm i=48.3:1 SKU: 48323346](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-90b8-2-400v-50hz-shaft-diameter-45mm-i48-31-sku-48323346/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 71A8/2 400V 50Hz shaft diameter 45mm i=166:1 SKU: 48323246](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-71a8-2-400v-50hz-shaft-diameter-45mm-i1661-sku-48323246/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 250 motor type 63A8/2 400V 50Hz shaft diameter 45mm i=156:1 SKU: 48323146](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-250-motor-type-63a8-2-400v-50hz-shaft-diameter-45mm-i1561-sku-48323146/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 90B8/2 400V 50Hz shaft diameter 35mm i=23:1 SKU: 48222446](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-90b8-2-400v-50hz-shaft-diameter-35mm-i231-sku-48222446/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 90B8/2 400V 50Hz shaft diameter 35mm i=45.5:1 SKU: 48222346](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-90b8-2-400v-50hz-shaft-diameter-35mm-i45-51-sku-48222346/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 71A8/2 400V 50Hz shaft diameter 35mm i=44.1:1 SKU: 48222246](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-71a8-2-400v-50hz-shaft-diameter-35mm-i44-11-sku-48222246/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 63A8/2 400V 50Hz shaft diameter 35mm i=135:1 SKU: 48222146](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-63a8-2-400v-50hz-shaft-diameter-35mm-i1351-sku-48222146/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 100A8/2 400V 50Hz shaft diameter 35mm i=19.9:1 SKU: 48221546](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-100a8-2-400v-50hz-shaft-diameter-35mm-i19-91-sku-48221546/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 90A8/2 400V 50Hz shaft diameter 35mm i=39.4:1 SKU: 48221446](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-90a8-2-400v-50hz-shaft-diameter-35mm-i39-41-sku-48221446/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 80A8/2 400V 50Hz shaft diameter 35mm i=39.9:1 SKU: 48221346](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-80a8-2-400v-50hz-shaft-diameter-35mm-i39-91-sku-48221346/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 71A8/2 400V 50Hz shaft diameter 35mm i=126:1 SKU: 48221246](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-71a8-2-400v-50hz-shaft-diameter-35mm-i1261-sku-48221246/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Geared motor RBM/I for travel-wheel system RB/I size 200 motor type 63A8/2 400V 50Hz shaft diameter 35mm i=123:1 SKU: 48221146](https://maedler.in/product/geared-motor-rbm-i-for-travel-wheel-system-rb-i-size-200-motor-type-63a8-2-400v-50hz-shaft-diameter-35mm-i1231-sku-48221146/): Material: Housing: Aluminium, painted blue (RAL 5009). Gears: bevel-gear system, case hardened, fatigue endurable. Lubrication: Mineral oil. Motor: Three-phase AC Motor 400 V 50 Hz, dual speeed. Other motor and gear box versions (e.g. with frequency inverter or angular gear) on request. Ready-to-mount dual-speed geared motors incl. adaptor flange (as torque support) to be combined with travel-wheel sets RB/I. The mounting position can be modified in steps of 15°. Single Wheel Drive: one geared motor RBM/I is flange-mounted onto one travel-wheel system RB/I. In carriages two opposing travel-wheel sets have to be powered. Central Drive Set: the geared motor is flange-mounted onto the travel-wheel system. The connection with the opposing travel-wheel system is done with a central drive set (this set has to be ordered separately). The connecting shaft (output shaft) is already mounted on the geared motors (covered with protection sleeve and protection cap). - [Buffer set for travel-wheel system RB/I diameter 95mm length 100mm SKU: 48071084](https://maedler.in/product/buffer-set-for-travel-wheel-system-rb-i-diameter-95mm-length-100mm-sku-48071084/): Material: Polyurethane cellular foam, spacers made of plastic, black. Consisting of: one buffer, threaded pin M12 x 55 mm, two spacers 12,5 mm (for mounting without guide roller) and one spacer 25 mm (for mounting with guide roller, using the supplied nuts M12). The required thread has already been machined on both face ends of the travel-wheel system. The srew-on buffer fits both travel-wheel-system sizes 200 and 250. Temperature range: -20°C to +60°C. Weight: 0,8 kg. - [Horizontal guide-roller arrangement for travel-wheel system RB/I size 250 type G overall width 230mm without damper SKU: 48051044](https://maedler.in/product/horizontal-guide-roller-arrangement-for-travel-wheel-system-rb-i-size-250-type-g-overall-width-230mm-without-damper-sku-48051044/): Material: Base: steel plate, zinc plated. Damping elements: Polyamide (damping elements only for travel-wheel system with Hydropur-tyre travel wheel). Version G: for travel-wheel system with cast wheel. Without damping element. Version K: for travel-wheel system with Hydropur tyre. With damping element. Consisting of: roller bracket, bearing, damping element and mounting bolts (damping element only for version K). Two sizes for travel-wheel system size 200 or 250. The horizontal guide-roller arrangement is used for low-friction guidance and to precisely achieve individual track gauge dimensions. The guide roller is e.g. recommended for flanged wheels (version G) running on narrow tracks. The guide rollers are only used on one of the rails. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881645](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881645/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881642](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881642/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881640](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881640/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881638](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881638/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881635](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881635/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881632](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881632/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881630](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881630/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881628](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881628/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881625](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881625/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881550](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881550/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881548](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881548/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881545](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881545/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881542](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881542/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881540](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881540/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881538](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881535](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881532](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881530](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881528](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881525](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881450](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881450/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881448](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881448/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881445](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881445/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881442](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881442/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881440](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881440/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881438](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881435](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881432](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881430](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881430/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881428](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881425](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881350](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881350/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881348](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881348/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881345](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881345/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881342](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881342/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881340](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881340/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881338](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881335](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881332](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881330](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881328](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881325](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881242](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881242/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881240](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881240/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881238](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881235](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881232](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881230](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881228](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881225](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881142](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881142/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881140](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881140/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881138](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881135](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881132](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881130](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881128](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881128/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881125](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRTG 16 B-1 1"x17.02mm 30 teeth material steel teeth hardened for taper bush type 3020 SKU: 10878130](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-3020-sku-10878130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 28 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878128](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-28-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878128/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 27 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878127](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 26 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878126](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-26-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878126/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 25 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878125](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 24 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878124](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-24-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878124/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 23 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878123](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 22 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878122](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-22-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878122/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 21 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878121](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 20 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878120](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-20-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878120/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 19 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878119](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 18 teeth material steel teeth hardened for taper bush type 2517 SKU: 10878118](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-18-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10878118/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 17 teeth material steel teeth hardened for taper bush type 2012 SKU: 10878117](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10878117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 16 teeth material steel teeth hardened for taper bush type 2012 SKU: 10878116](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-16-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10878116/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 15 teeth material steel teeth hardened for taper bush type 1610 SKU: 10878115](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10878115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 14 teeth material steel teeth hardened for taper bush type 1610 SKU: 10878114](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-14-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10878114/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 16 B-1 1"x17.02mm 13 teeth material steel teeth hardened for taper bush type 1610 SKU: 10878113](https://maedler.in/product/sprocket-krtg-16-b-1-1x17-02mm-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-1610-sku-10878113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 114 teeth material cast iron for taper bush type 3030 SKU: 10877188G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-114-teeth-material-cast-iron-for-taper-bush-type-3030-sku-10877188g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 95 teeth material cast iron for taper bush type 3020 SKU: 10877183G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-95-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877183g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 76 teeth material cast iron for taper bush type 3020 SKU: 10877176G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 57 teeth material cast iron for taper bush type 3020 SKU: 10877157G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-57-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 57 teeth material steel for taper bush type 3020 SKU: 10877157](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-57-teeth-material-steel-for-taper-bush-type-3020-sku-10877157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 45 teeth material cast iron for taper bush type 3020 SKU: 10877145G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-45-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877145g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 45 teeth material steel for taper bush type 3020 SKU: 10877145](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-45-teeth-material-steel-for-taper-bush-type-3020-sku-10877145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 38 teeth material cast iron for taper bush type 3020 SKU: 10877138G](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-38-teeth-material-cast-iron-for-taper-bush-type-3020-sku-10877138g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 38 teeth material steel for taper bush type 3020 SKU: 10877138](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-38-teeth-material-steel-for-taper-bush-type-3020-sku-10877138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 30 teeth material steel for taper bush type 3020 SKU: 10877130](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-30-teeth-material-steel-for-taper-bush-type-3020-sku-10877130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 28 teeth material steel for taper bush type 2517 SKU: 10877128](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-28-teeth-material-steel-for-taper-bush-type-2517-sku-10877128/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 27 teeth material steel for taper bush type 2517 SKU: 10877127](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-27-teeth-material-steel-for-taper-bush-type-2517-sku-10877127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 26 teeth material steel for taper bush type 2517 SKU: 10877126](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-26-teeth-material-steel-for-taper-bush-type-2517-sku-10877126/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 25 teeth material steel for taper bush type 2517 SKU: 10877125](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-25-teeth-material-steel-for-taper-bush-type-2517-sku-10877125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 24 teeth material steel for taper bush type 2517 SKU: 10877124](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-24-teeth-material-steel-for-taper-bush-type-2517-sku-10877124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 23 teeth material steel for taper bush type 2517 SKU: 10877123](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-23-teeth-material-steel-for-taper-bush-type-2517-sku-10877123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 22 teeth material steel for taper bush type 2517 SKU: 10877122](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-22-teeth-material-steel-for-taper-bush-type-2517-sku-10877122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 21 teeth material steel for taper bush type 2517 SKU: 10877121](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-21-teeth-material-steel-for-taper-bush-type-2517-sku-10877121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 20 teeth material steel for taper bush type 2517 SKU: 10877120](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-20-teeth-material-steel-for-taper-bush-type-2517-sku-10877120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 19 teeth material steel for taper bush type 2517 SKU: 10877119](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-19-teeth-material-steel-for-taper-bush-type-2517-sku-10877119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 18 teeth material steel for taper bush type 2517 SKU: 10877118](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-18-teeth-material-steel-for-taper-bush-type-2517-sku-10877118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 17 teeth material steel for taper bush type 2012 SKU: 10877117](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-17-teeth-material-steel-for-taper-bush-type-2012-sku-10877117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 16 teeth material steel for taper bush type 2012 SKU: 10877116](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-16-teeth-material-steel-for-taper-bush-type-2012-sku-10877116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 15 teeth material steel for taper bush typ 1610 SKU: 10877115](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-15-teeth-material-steel-for-taper-bush-typ-1610-sku-10877115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 16 B-1 1"x17.02mm 14 teeth material steel for taper bush type 1610 SKU: 10877114](https://maedler.in/product/sprocket-krt-16-b-1-1x17-02mm-14-teeth-material-steel-for-taper-bush-type-1610-sku-10877114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25. At these sprockets, the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Slide set DA 4160 slide length 400mm aluminium SKU: 64905540](https://maedler.in/product/slide-set-da-4160-slide-length-400mm-aluminium-sku-64905540/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 350mm aluminium SKU: 64905535](https://maedler.in/product/slide-set-da-4160-slide-length-350mm-aluminium-sku-64905535/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 300mm aluminium SKU: 64905530](https://maedler.in/product/slide-set-da-4160-slide-length-300mm-aluminium-sku-64905530/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide rail DZ 9308 single rail right hand slide length 1524mm zinc plated SKU: 64905460](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-1524mm-zinc-plated-sku-64905460/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 1219mm zinc plated SKU: 64905448](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-1219mm-zinc-plated-sku-64905448/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 1067mm zinc plated SKU: 64905442](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-1067mm-zinc-plated-sku-64905442/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 1016mm zinc plated SKU: 64905440](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-1016mm-zinc-plated-sku-64905440/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 914mm zinc plated SKU: 64905436](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-914mm-zinc-plated-sku-64905436/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 864mm zinc plated SKU: 64905434](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-864mm-zinc-plated-sku-64905434/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 813mm zinc plated SKU: 64905432](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-813mm-zinc-plated-sku-64905432/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 762mm zinc plated SKU: 64905430](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-762mm-zinc-plated-sku-64905430/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 711mm zinc plated SKU: 64905428](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-711mm-zinc-plated-sku-64905428/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 660mm zinc plated SKU: 64905426](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-660mm-zinc-plated-sku-64905426/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 610mm zinc plated SKU: 64905424](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-610mm-zinc-plated-sku-64905424/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 559mm zinc plated SKU: 64905422](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-559mm-zinc-plated-sku-64905422/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 508mm zinc plated SKU: 64905420](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-508mm-zinc-plated-sku-64905420/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 457mm zinc plated SKU: 64905418](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-457mm-zinc-plated-sku-64905418/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 406mm zinc plated SKU: 64905416](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-406mm-zinc-plated-sku-64905416/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 356mm zinc plated SKU: 64905414](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-356mm-zinc-plated-sku-64905414/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail right hand slide length 305mm zinc plated SKU: 64905412](https://maedler.in/product/slide-rail-dz-9308-single-rail-right-hand-slide-length-305mm-zinc-plated-sku-64905412/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 1524mm zinc plated SKU: 64905260](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-1524mm-zinc-plated-sku-64905260/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 1219mm zinc plated SKU: 64905248](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-1219mm-zinc-plated-sku-64905248/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 1067mm zinc plated SKU: 64905242](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-1067mm-zinc-plated-sku-64905242/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 1016mm zinc plated SKU: 64905240](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-1016mm-zinc-plated-sku-64905240/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 914mm zinc plated SKU: 64905236](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-914mm-zinc-plated-sku-64905236/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 864mm zinc plated SKU: 64905234](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-864mm-zinc-plated-sku-64905234/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 813mm zinc plated SKU: 64905232](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-813mm-zinc-plated-sku-64905232/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 762mm zinc plated SKU: 64905230](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-762mm-zinc-plated-sku-64905230/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 711mm zinc plated SKU: 64905228](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-711mm-zinc-plated-sku-64905228/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 660mm zinc plated SKU: 64905226](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-660mm-zinc-plated-sku-64905226/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 610mm zinc plated SKU: 64905224](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-610mm-zinc-plated-sku-64905224/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 559mm zinc plated SKU: 64905222](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-559mm-zinc-plated-sku-64905222/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 508mm zinc plated SKU: 64905220](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-508mm-zinc-plated-sku-64905220/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 457mm zinc plated SKU: 64905218](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-457mm-zinc-plated-sku-64905218/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 406mm zinc plated SKU: 64905216](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-406mm-zinc-plated-sku-64905216/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 356mm zinc plated SKU: 64905214](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-356mm-zinc-plated-sku-64905214/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9308 single rail left hand slide length 305mm zinc plated SKU: 64905212](https://maedler.in/product/slide-rail-dz-9308-single-rail-left-hand-slide-length-305mm-zinc-plated-sku-64905212/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold singly (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Single slides available (left or right). Lengths to 1.5 meters. Lock-in in closed position. Lock-out in open position. Front lever lock releaze. Only for vertical mounting. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles (to 180 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note These slides are available separately. To lock both sides, you need a left slide 9308 and a right slide 9308. If you want to lock only one side, you can combinate it with a slide 9301-E. Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 1524mm zinc plated SKU: 64905160](https://maedler.in/product/slide-rail-dz-9301-slide-length-1524mm-zinc-plated-sku-64905160/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 1372mm zinc plated SKU: 64905154](https://maedler.in/product/slide-rail-dz-9301-slide-length-1372mm-zinc-plated-sku-64905154/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 1219mm zinc plated SKU: 64905148](https://maedler.in/product/slide-rail-dz-9301-slide-length-1219mm-zinc-plated-sku-64905148/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 1118mm zinc plated SKU: 64905144](https://maedler.in/product/slide-rail-dz-9301-slide-length-1118mm-zinc-plated-sku-64905144/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 1067mm zinc plated SKU: 64905142](https://maedler.in/product/slide-rail-dz-9301-slide-length-1067mm-zinc-plated-sku-64905142/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 1016mm zinc plated SKU: 64905140](https://maedler.in/product/slide-rail-dz-9301-slide-length-1016mm-zinc-plated-sku-64905140/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 914mm zinc plated SKU: 64905136](https://maedler.in/product/slide-rail-dz-9301-slide-length-914mm-zinc-plated-sku-64905136/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 864mm zinc plated SKU: 64905134](https://maedler.in/product/slide-rail-dz-9301-slide-length-864mm-zinc-plated-sku-64905134/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 813mm zinc plated SKU: 64905132](https://maedler.in/product/slide-rail-dz-9301-slide-length-813mm-zinc-plated-sku-64905132/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 762mm zinc plated SKU: 64905130](https://maedler.in/product/slide-rail-dz-9301-slide-length-762mm-zinc-plated-sku-64905130/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 711mm zinc plated SKU: 64905128](https://maedler.in/product/slide-rail-dz-9301-slide-length-711mm-zinc-plated-sku-64905128/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 660mm zinc plated SKU: 64905126](https://maedler.in/product/slide-rail-dz-9301-slide-length-660mm-zinc-plated-sku-64905126/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 610mm zinc plated SKU: 64905124](https://maedler.in/product/slide-rail-dz-9301-slide-length-610mm-zinc-plated-sku-64905124/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 559mm zinc plated SKU: 64905122](https://maedler.in/product/slide-rail-dz-9301-slide-length-559mm-zinc-plated-sku-64905122/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 508mm zinc plated SKU: 64905120](https://maedler.in/product/slide-rail-dz-9301-slide-length-508mm-zinc-plated-sku-64905120/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 457mm zinc plated SKU: 64905118](https://maedler.in/product/slide-rail-dz-9301-slide-length-457mm-zinc-plated-sku-64905118/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 406mm zinc plated SKU: 64905116](https://maedler.in/product/slide-rail-dz-9301-slide-length-406mm-zinc-plated-sku-64905116/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 356mm zinc plated SKU: 64905114](https://maedler.in/product/slide-rail-dz-9301-slide-length-356mm-zinc-plated-sku-64905114/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 305mm zinc plated SKU: 64905112](https://maedler.in/product/slide-rail-dz-9301-slide-length-305mm-zinc-plated-sku-64905112/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide rail DZ 9301 slide length 254mm zinc plated SKU: 64905110](https://maedler.in/product/slide-rail-dz-9301-slide-length-254mm-zinc-plated-sku-64905110/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Lengths to 1.5 meters. Optional clip-on bracket accessory kits type 634 available. Service life 10,000 cycles ( to 217 kg up to 75,000 cycles). Temperature range: -20°C to +70°C. Note Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 5417 slide length 700mm zinc plated SKU: 64904970](https://maedler.in/product/slide-set-dz-5417-slide-length-700mm-zinc-plated-sku-64904970/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in the closed position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 049 30, Slides 5417 - [Slide set DZ 5417 slide length 650mm zinc plated SKU: 64904965](https://maedler.in/product/slide-set-dz-5417-slide-length-650mm-zinc-plated-sku-64904965/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in the closed position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 049 30, Slides 5417 - [Slide set DZ 5417 slide length 600mm zinc plated SKU: 64904960](https://maedler.in/product/slide-set-dz-5417-slide-length-600mm-zinc-plated-sku-64904960/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in the closed position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 049 30, Slides 5417 - [Slide set DZ 5417 slide length 550mm zinc plated SKU: 64904955](https://maedler.in/product/slide-set-dz-5417-slide-length-550mm-zinc-plated-sku-64904955/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in the closed position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 049 30, Slides 5417 - [Slide set DZ 5417 slide length 500mm zinc plated SKU: 64904950](https://maedler.in/product/slide-set-dz-5417-slide-length-500mm-zinc-plated-sku-64904950/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in the closed position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 049 30, Slides 5417 - [Slide set DZ 5417 slide length 450mm zinc plated SKU: 64904945](https://maedler.in/product/slide-set-dz-5417-slide-length-450mm-zinc-plated-sku-64904945/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in the closed position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 049 30, Slides 5417 - [Slide set DZ 5417 slide length 400mm zinc plated SKU: 64904940](https://maedler.in/product/slide-set-dz-5417-slide-length-400mm-zinc-plated-sku-64904940/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in the closed position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 049 30, Slides 5417 - [Slide set DZ 5417 slide length 350mm zinc plated SKU: 64904935](https://maedler.in/product/slide-set-dz-5417-slide-length-350mm-zinc-plated-sku-64904935/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in the closed position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 049 30, Slides 5417 - [Slide set DZ 5417 slide length 300mm zinc plated SKU: 64904930](https://maedler.in/product/slide-set-dz-5417-slide-length-300mm-zinc-plated-sku-64904930/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in the closed position. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 049 30, Slides 5417 - [Slide set DS 5322 slide length 790mm stainless steel SKU: 64904880](https://maedler.in/product/slide-set-ds-5322-slide-length-790mm-stainless-steel-sku-64904880/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Easily mounted brackets with bolts. Especially long service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 048 30, Slides DS 5322 - [Slide set DS 5322 slide length 700mm stainless steel SKU: 64904870](https://maedler.in/product/slide-set-ds-5322-slide-length-700mm-stainless-steel-sku-64904870/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Easily mounted brackets with bolts. Especially long service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 048 30, Slides DS 5322 - [Slide set DS 5322 slide length 600mm stainless steel SKU: 64904860](https://maedler.in/product/slide-set-ds-5322-slide-length-600mm-stainless-steel-sku-64904860/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Easily mounted brackets with bolts. Especially long service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 048 30, Slides DS 5322 - [Slide set DS 5322 slide length 550mm stainless steel SKU: 64904855](https://maedler.in/product/slide-set-ds-5322-slide-length-550mm-stainless-steel-sku-64904855/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Easily mounted brackets with bolts. Especially long service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 048 30, Slides DS 5322 - [Slide set DS 5322 slide length 500mm stainless steel SKU: 64904850](https://maedler.in/product/slide-set-ds-5322-slide-length-500mm-stainless-steel-sku-64904850/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Easily mounted brackets with bolts. Especially long service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 048 30, Slides DS 5322 - [Slide set DS 5322 slide length 450mm stainless steel SKU: 64904845](https://maedler.in/product/slide-set-ds-5322-slide-length-450mm-stainless-steel-sku-64904845/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Easily mounted brackets with bolts. Especially long service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 048 30, Slides DS 5322 - [Slide set DS 5322 slide length 400mm stainless steel SKU: 64904840](https://maedler.in/product/slide-set-ds-5322-slide-length-400mm-stainless-steel-sku-64904840/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Easily mounted brackets with bolts. Especially long service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 048 30, Slides DS 5322 - [Slide set DS 5322 slide length 350mm stainless steel SKU: 64904835](https://maedler.in/product/slide-set-ds-5322-slide-length-350mm-stainless-steel-sku-64904835/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Easily mounted brackets with bolts. Especially long service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 048 30, Slides DS 5322 - [Slide set DS 5322 slide length 300mm stainless steel SKU: 64904830](https://maedler.in/product/slide-set-ds-5322-slide-length-300mm-stainless-steel-sku-64904830/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Easily mounted brackets with bolts. Especially long service life, up to 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. Ordering details: e.g.: Product no. 649 048 30, Slides DS 5322 - [Slide set DS 5334 Slide length 790mm stainless steel 1.4301 SKU: 64904679](https://maedler.in/product/slide-set-ds-5334-slide-length-790mm-stainless-steel-1-4301-sku-64904679/): Material: Stainless steel 1.4301 (AISI 304).Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast disconnection.• Optional bracket kits for various mounting options on request.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating.Attention: Vertical (side) mounting only. - [Slide set DS 5334 Slide length 700mm stainless steel 1.4301 SKU: 64904670](https://maedler.in/product/slide-set-ds-5334-slide-length-700mm-stainless-steel-1-4301-sku-64904670/): Material: Stainless steel 1.4301 (AISI 304).Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast disconnection.• Optional bracket kits for various mounting options on request.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating.Attention: Vertical (side) mounting only. - [Slide set DS 5334 Slide length 600mm stainless steel 1.4301 SKU: 64904660](https://maedler.in/product/slide-set-ds-5334-slide-length-600mm-stainless-steel-1-4301-sku-64904660/): Material: Stainless steel 1.4301 (AISI 304).Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast disconnection.• Optional bracket kits for various mounting options on request.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating.Attention: Vertical (side) mounting only. - [Slide set DS 5334 Slide length 550mm stainless steel 1.4301 SKU: 64904655](https://maedler.in/product/slide-set-ds-5334-slide-length-550mm-stainless-steel-1-4301-sku-64904655/): Material: Stainless steel 1.4301 (AISI 304).Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast disconnection.• Optional bracket kits for various mounting options on request.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating.Attention: Vertical (side) mounting only. - [Slide set DS 5334 Slide length 500mm stainless steel 1.4301 SKU: 64904650](https://maedler.in/product/slide-set-ds-5334-slide-length-500mm-stainless-steel-1-4301-sku-64904650/): Material: Stainless steel 1.4301 (AISI 304).Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast disconnection.• Optional bracket kits for various mounting options on request.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating.Attention: Vertical (side) mounting only. - [Slide set DS 5334 Slide length 450mm stainless steel 1.4301 SKU: 64904645](https://maedler.in/product/slide-set-ds-5334-slide-length-450mm-stainless-steel-1-4301-sku-64904645/): Material: Stainless steel 1.4301 (AISI 304).Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast disconnection.• Optional bracket kits for various mounting options on request.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating.Attention: Vertical (side) mounting only. - [Slide set DS 5334 Slide length 400mm stainless steel 1.4301 SKU: 64904640](https://maedler.in/product/slide-set-ds-5334-slide-length-400mm-stainless-steel-1-4301-sku-64904640/): Material: Stainless steel 1.4301 (AISI 304).Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast disconnection.• Optional bracket kits for various mounting options on request.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating.Attention: Vertical (side) mounting only. - [Slide set DS 5334 Slide length 350mm stainless steel 1.4301 SKU: 64904635](https://maedler.in/product/slide-set-ds-5334-slide-length-350mm-stainless-steel-1-4301-sku-64904635/): Material: Stainless steel 1.4301 (AISI 304).Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast disconnection.• Optional bracket kits for various mounting options on request.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating.Attention: Vertical (side) mounting only. - [Slide set DS 5334 Slide length 300mm stainless steel 1.4301 SKU: 64904630](https://maedler.in/product/slide-set-ds-5334-slide-length-300mm-stainless-steel-1-4301-sku-64904630/): Material: Stainless steel 1.4301 (AISI 304).Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Fast disconnection.• Optional bracket kits for various mounting options on request.• Service life 50,000 cycles.• Temperature range: -20°C to +70°C.Note: Recommended mount: M5 countersunk / 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating.Attention: Vertical (side) mounting only. - [Slide set DA 5321 slide length 790mm aluminium SKU: 64904580](https://maedler.in/product/slide-set-da-5321-slide-length-790mm-aluminium-sku-64904580/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DA 5321 slide length 700mm aluminium SKU: 64904570](https://maedler.in/product/slide-set-da-5321-slide-length-700mm-aluminium-sku-64904570/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DA 5321 slide length 650mm aluminium SKU: 64904565](https://maedler.in/product/slide-set-da-5321-slide-length-650mm-aluminium-sku-64904565/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DA 5321 slide length 600mm aluminium SKU: 64904560](https://maedler.in/product/slide-set-da-5321-slide-length-600mm-aluminium-sku-64904560/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DA 5321 slide length 550mm aluminium SKU: 64904555](https://maedler.in/product/slide-set-da-5321-slide-length-550mm-aluminium-sku-64904555/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DA 5321 slide length 500mm aluminium SKU: 64904550](https://maedler.in/product/slide-set-da-5321-slide-length-500mm-aluminium-sku-64904550/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DA 5321 slide length 450mm aluminium SKU: 64904545](https://maedler.in/product/slide-set-da-5321-slide-length-450mm-aluminium-sku-64904545/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DA 5321 slide length 400mm aluminium SKU: 64904540](https://maedler.in/product/slide-set-da-5321-slide-length-400mm-aluminium-sku-64904540/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DA 5321 slide length 350mm aluminium SKU: 64904535](https://maedler.in/product/slide-set-da-5321-slide-length-350mm-aluminium-sku-64904535/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DA 5321 slide length 300mm aluminium SKU: 64904530](https://maedler.in/product/slide-set-da-5321-slide-length-300mm-aluminium-sku-64904530/): Material: Slide elements: Aluminium.Ball retainers and balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 40,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk/ 6mm countersunk Euro screw. Use all mounting positions to achieve the max. load rating. The load capacity was tested at a slide spacing of 450mm. Attention: vertical (side) mounting only. - [Slide set DZ 3932 EC Slide length 700mm zinc plated SKU: 64904470](https://maedler.in/product/slide-set-dz-3932-ec-slide-length-700mm-zinc-plated-sku-64904470/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Self Close.• Fast disconnection.• Hold-in in closed position.• Service life 50,000 cycles.• Temperature range: -10°C to +40°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. The load capacity was tested at a slide spacing of 450mm. For optimal performance, the construct drawer width must be 27 mm less than the cabinet opening width.* Not available for slide length 300 mm.** Not available for slide length 350 mm.*** Not available for slide length 400 mm. - [Slide set DZ 3932 EC Slide length 650mm zinc plated SKU: 64904465](https://maedler.in/product/slide-set-dz-3932-ec-slide-length-650mm-zinc-plated-sku-64904465/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Self Close.• Fast disconnection.• Hold-in in closed position.• Service life 50,000 cycles.• Temperature range: -10°C to +40°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. The load capacity was tested at a slide spacing of 450mm. For optimal performance, the construct drawer width must be 27 mm less than the cabinet opening width.* Not available for slide length 300 mm.** Not available for slide length 350 mm.*** Not available for slide length 400 mm. - [Slide set DZ 3932 EC Slide length 600mm zinc plated SKU: 64904460](https://maedler.in/product/slide-set-dz-3932-ec-slide-length-600mm-zinc-plated-sku-64904460/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Self Close.• Fast disconnection.• Hold-in in closed position.• Service life 50,000 cycles.• Temperature range: -10°C to +40°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. The load capacity was tested at a slide spacing of 450mm. For optimal performance, the construct drawer width must be 27 mm less than the cabinet opening width.* Not available for slide length 300 mm.** Not available for slide length 350 mm.*** Not available for slide length 400 mm. - [Slide set DZ 3932 EC Slide length 550mm zinc plated SKU: 64904455](https://maedler.in/product/slide-set-dz-3932-ec-slide-length-550mm-zinc-plated-sku-64904455/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Self Close.• Fast disconnection.• Hold-in in closed position.• Service life 50,000 cycles.• Temperature range: -10°C to +40°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. The load capacity was tested at a slide spacing of 450mm. For optimal performance, the construct drawer width must be 27 mm less than the cabinet opening width.* Not available for slide length 300 mm.** Not available for slide length 350 mm.*** Not available for slide length 400 mm. - [Slide set DZ 3932 EC Slide length 500mm zinc plated SKU: 64904450](https://maedler.in/product/slide-set-dz-3932-ec-slide-length-500mm-zinc-plated-sku-64904450/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Self Close.• Fast disconnection.• Hold-in in closed position.• Service life 50,000 cycles.• Temperature range: -10°C to +40°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. The load capacity was tested at a slide spacing of 450mm. For optimal performance, the construct drawer width must be 27 mm less than the cabinet opening width.* Not available for slide length 300 mm.** Not available for slide length 350 mm.*** Not available for slide length 400 mm. - [Slide set DZ 3932 EC Slide length 450mm zinc plated SKU: 64904445](https://maedler.in/product/slide-set-dz-3932-ec-slide-length-450mm-zinc-plated-sku-64904445/): Material: Slide elements: Cold-rolled steel, bright zinc-plated. Ball retainers: Plastic / zinc-plated steel. Balls: Hardened steel.Telescopic ball bearing slides for applications in the industrial and electronics sector. Sold by pair (1 x product no. = 1 pair of slides).• Self Close.• Fast disconnection.• Hold-in in closed position.• Service life 50,000 cycles.• Temperature range: -10°C to +40°C.Note: Recommended mount: M4 screw/6mm Euro screw/4mm wood screw. Max. head. height 2,5mm/Ø9,6mm. Use all mounting positions to achieve the max. load rating. Attention: Vertical (side) mounting only. The load capacity was tested at a slide spacing of 450mm. For optimal performance, the construct drawer width must be 27 mm less than the cabinet opening width.* Not available for slide length 300 mm.** Not available for slide length 350 mm.*** Not available for slide length 400 mm. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm open (unsealed) clearance C3 SKU: 6007-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-open-unsealed-clearance-c3-sku-6007-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [One-piece clamp coupling MAS both sides bore 50mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60065000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-50mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60065000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 40mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60064000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-40mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60064000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 35mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60063500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-35mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60063500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 30mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60063000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-30mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60063000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 25mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60062500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-25mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60062500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 20mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60062000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-20mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60062000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm shielded on both sides SKU: 6006-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-shielded-on-both-sides-sku-6006-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm shielded on both sides clearance C3 SKU: 6006-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-shielded-on-both-sides-clearance-c3-sku-6006-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm sealed on both sides SKU: 6006-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-sealed-on-both-sides-sku-6006-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm sealed on both sides clearance C3 SKU: 6006-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-sealed-on-both-sides-clearance-c3-sku-6006-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm sealed on both sides SKU: 6006-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-sealed-on-both-sides-sku-6006-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [One-piece clamp coupling MAS both sides bore 19mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061900](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-19mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061900/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 16mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061600](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-16mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061600/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 15mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-15mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 14mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061400](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-14mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061400/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 12mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061200](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-12mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061200/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 10mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60061000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-10mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60061000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 8mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060800](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-8mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060800/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 6mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060600](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-6mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060600/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 5mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-5mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 4mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060400](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-4mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060400/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 3mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60060300](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-3mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60060300/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm shielded on both sides SKU: 6006-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-shielded-on-both-sides-sku-6006-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm open (unsealed) SKU: 6006-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-open-unsealed-sku-6006-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 55mm width 13mm open (unsealed) clearance C3 SKU: 6006-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-55mm-width-13mm-open-unsealed-clearance-c3-sku-6006-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm shielded on both sides SKU: 6005-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-shielded-on-both-sides-sku-6005-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm shielded on both sides clearance C3 SKU: 6005-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6005-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm sealed on both sides SKU: 6005-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-sealed-on-both-sides-sku-6005-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm sealed on both sides SKU: 6005-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-sealed-on-both-sides-sku-6005-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm sealed on both sides clearance C3 SKU: 6005-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6005-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm sealed on both sides clearance C3 SKU: 6005-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6005-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm shielded on both sides SKU: 6005-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-shielded-on-both-sides-sku-6005-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm shielded on both sides clearance C3 SKU: 6005-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6005-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm open (unsealed) SKU: 6005-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-open-unsealed-sku-6005-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 47mm width 12mm open (unsealed) clearance C3 SKU: 6005-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-47mm-width-12mm-open-unsealed-clearance-c3-sku-6005-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm shielded on both sides SKU: 6004-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-shielded-on-both-sides-sku-6004-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm shielded on both sides clearance C3 SKU: 6004-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6004-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm sealed on both sides SKU: 6004-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-sealed-on-both-sides-sku-6004-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm sealed on both sides SKU: 6004-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-sealed-on-both-sides-sku-6004-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm sealed on both sides clearance C3 SKU: 6004-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6004-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm sealed on both sides clearance C3 SKU: 6004-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6004-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm shielded on both sides SKU: 6004-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-shielded-on-both-sides-sku-6004-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm shielded on both sides clearance C3 SKU: 6004-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6004-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm open (unsealed) SKU: 6004-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-open-unsealed-sku-6004-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 42mm width 12mm open (unsealed) clearance C3 SKU: 6004-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-42mm-width-12mm-open-unsealed-clearance-c3-sku-6004-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm shielded on both sides SKU: 6003-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-shielded-on-both-sides-sku-6003-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm shielded on both sides clearance C3 SKU: 6003-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-shielded-on-both-sides-clearance-c3-sku-6003-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm sealed on both sides SKU: 6003-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-sealed-on-both-sides-sku-6003-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm sealed on both sides SKU: 6003-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-sealed-on-both-sides-sku-6003-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm sealed on both sides clearance C3 SKU: 6003-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-sealed-on-both-sides-clearance-c3-sku-6003-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm sealed on both sides clearance C3 SKU: 6003-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-sealed-on-both-sides-clearance-c3-sku-6003-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm shielded on both sides SKU: 6003-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-shielded-on-both-sides-sku-6003-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm shielded on both sides clearance C3 SKU: 6003-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-shielded-on-both-sides-clearance-c3-sku-6003-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm open (unsealed) SKU: 6003-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-open-unsealed-sku-6003-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 35mm width 10mm open (unsealed) clearance C3 SKU: 6003-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-35mm-width-10mm-open-unsealed-clearance-c3-sku-6003-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Set-screw coupling TR steel C45 black oxide finished bore 50mm with keyway SKU: 60025000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-50mm-with-keyway-sku-60025000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 40mm with keyway SKU: 60024000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-40mm-with-keyway-sku-60024000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 35mm with keyway SKU: 60023500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-35mm-with-keyway-sku-60023500/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 30mm with keyway SKU: 60023000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-30mm-with-keyway-sku-60023000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 25mm with keyway SKU: 60022500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-25mm-with-keyway-sku-60022500/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 20mm with keyway SKU: 60022000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-20mm-with-keyway-sku-60022000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm shielded on both sides SKU: 6002-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-shielded-on-both-sides-sku-6002-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm shielded on both sides clearance C3 SKU: 6002-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-shielded-on-both-sides-clearance-c3-sku-6002-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 9mm sealed on both sides SKU: 6002-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-9mm-sealed-on-both-sides-sku-6002-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm sealed on both sides SKU: 6002-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-sealed-on-both-sides-sku-6002-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm sealed on both sides clearance C3 SKU: 6002-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-sealed-on-both-sides-clearance-c3-sku-6002-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 9mm sealed on both sides clearance C3 SKU: 6002-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-9mm-sealed-on-both-sides-clearance-c3-sku-6002-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Set-screw coupling TR steel C45 black oxide finished bore 16mm with keyway SKU: 60021600](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-16mm-with-keyway-sku-60021600/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 15mm with keyway SKU: 60021500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-15mm-with-keyway-sku-60021500/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 14mm with keyway SKU: 60021400](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-14mm-with-keyway-sku-60021400/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 12mm with keyway SKU: 60021200](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-12mm-with-keyway-sku-60021200/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 10mm with keyway SKU: 60021000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-10mm-with-keyway-sku-60021000/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 8mm with keyway SKU: 60020800](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-8mm-with-keyway-sku-60020800/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR steel C45 black oxide finished bore 6mm with keyway SKU: 60020600](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-6mm-with-keyway-sku-60020600/): Material: Steel C45, burnished. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm shielded on both sides SKU: 6002-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-shielded-on-both-sides-sku-6002-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKU: 6002-ZZ-C3-MAE](https://maedler.in/product/sku-6002-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm open (unsealed) SKU: 6002-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-open-unsealed-sku-6002-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 32mm width 9mm open (unsealed) clearance C3 SKU: 6002-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-32mm-width-9mm-open-unsealed-clearance-c3-sku-6002-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Set-screw coupling TR steel C45 black oxide finished bore 50mm without keyway SKU: 60015000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-50mm-without-keyway-sku-60015000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 40mm without keyway SKU: 60014000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-40mm-without-keyway-sku-60014000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 35mm without keyway SKU: 60013500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-35mm-without-keyway-sku-60013500/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 30mm without keyway SKU: 60013000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-30mm-without-keyway-sku-60013000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 25mm without keyway SKU: 60012500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-25mm-without-keyway-sku-60012500/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 20mm without keyway SKU: 60012000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-20mm-without-keyway-sku-60012000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm shielded on both sides SKU: 6001-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-shielded-on-both-sides-sku-6001-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm shielded on both sides clearance C3 SKU: 6001-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-shielded-on-both-sides-clearance-c3-sku-6001-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm sealed on both sides SKU: 6001-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-sealed-on-both-sides-sku-6001-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm sealed on both sides SKU: 6001-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-sealed-on-both-sides-sku-6001-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm sealed on both sides clearance C3 SKU: 6001-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-sealed-on-both-sides-clearance-c3-sku-6001-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm sealed on both sides clearance C3 SKU: 6001-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-sealed-on-both-sides-clearance-c3-sku-6001-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Set-screw coupling TR steel C45 black oxide finished bore 16mm without keyway SKU: 60011600](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-16mm-without-keyway-sku-60011600/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 15mm without keyway SKU: 60011500](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-15mm-without-keyway-sku-60011500/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 14mm without keyway SKU: 60011400](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-14mm-without-keyway-sku-60011400/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 12mm without keyway SKU: 60011200](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-12mm-without-keyway-sku-60011200/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 10mm without keyway SKU: 60011000](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-10mm-without-keyway-sku-60011000/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 8mm without keyway SKU: 60010800](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-8mm-without-keyway-sku-60010800/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR steel C45 black oxide finished bore 6mm without keyway SKU: 60010600](https://maedler.in/product/set-screw-coupling-tr-steel-c45-black-oxide-finished-bore-6mm-without-keyway-sku-60010600/): Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Clamp coupling (boc coupling) DIN 115 both sides bore 100mm with keyway material cast iron SKU: 60010000](https://maedler.in/product/clamp-coupling-boc-coupling-din-115-both-sides-bore-100mm-with-keyway-material-cast-iron-sku-60010000/): Material: GG25. Without protective jacket. Up to 50 mm bore the couplings are manufactured according to bore tolerance zone V7. For larger bores the fit is U7. All bores have a feather key grove according to DIN 6885/1. Recommended shaft tolerance: f7. A bearing must be placed right beside both ends of the coupling. Box couplings can be assembled and dismantled in radial direction without moving the shaft in vertical direction. Standard: Form A for shafts of the same diameter. On request: Form B for shafts of different diameters. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 28mm width 8mm shielded on both sides SKU: 6001-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-28mm-width-8mm-shielded-on-both-sides-sku-6001-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882550](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882550/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882548](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882548/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882545](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882545/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882542](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882542/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882540](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882540/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882538](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882535](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882532](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882530](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882530/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882528](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882528/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882525](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882450](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882450/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882448](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882448/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882445](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882445/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882442](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882442/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882440](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882440/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882438](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882435](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882432](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882430](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882430/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882428](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882428/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882425](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882425/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882350](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882350/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882348](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882348/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882345](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882345/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882342](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882342/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882340](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882340/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882338](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882335](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882332](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882330](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882328](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882325](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882250](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882250/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882248](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882248/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882245](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882245/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882242](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882242/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882240](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882240/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882238](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882235](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882232](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882230](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882228](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882225](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882150](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882150/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882148](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882148/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882145](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882145/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882142](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882142/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882140](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882140/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882138](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882135](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882132](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882130](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882128](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882128/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882125](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882050](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882050/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882048](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882048/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882045](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882045/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882042](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882042/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882040](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882040/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882038](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882035](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882032](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882030](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882028](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882028/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10882025](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10882025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881950](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881950/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881948](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881948/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881945](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881945/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881942](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881942/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881940](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881940/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881938](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881935](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881935/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881932](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881932/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881930](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881930/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881928](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881928/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881925](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881925/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881850](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881850/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881848](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881848/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881845](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881845/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881842](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881842/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881840](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881840/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881838](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881838/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881835](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881835/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881832](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881832/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881830](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881830/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881828](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881828/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881825](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881825/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881750](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881750/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881745](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881745/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881742](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881742/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881740](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881740/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881738](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881738/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881735](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881735/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881732](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881732/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881730](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881730/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881728](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881728/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881725](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881725/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881650](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881650/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRF with hub 16 B-1 16 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10881648](https://maedler.in/product/sprocket-krf-with-hub-16-b-1-16-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10881648/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Slide set DS 0305 slide length 305mm stainless steel 1.4301 SKU: 64922412](https://maedler.in/product/slide-set-ds-0305-slide-length-305mm-stainless-steel-1-4301-sku-64922412/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 700mm zinc plated and black passivated SKU: 64911070](https://maedler.in/product/slide-set-db-2132-slide-length-700mm-zinc-plated-and-black-passivated-sku-64911070/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 650mm zinc plated and black passivated SKU: 64911065](https://maedler.in/product/slide-set-db-2132-slide-length-650mm-zinc-plated-and-black-passivated-sku-64911065/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 600mm zinc plated and black passivated SKU: 64911060](https://maedler.in/product/slide-set-db-2132-slide-length-600mm-zinc-plated-and-black-passivated-sku-64911060/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 550mm zinc plated and black passivated SKU: 64911055](https://maedler.in/product/slide-set-db-2132-slide-length-550mm-zinc-plated-and-black-passivated-sku-64911055/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 500mm zinc plated and black passivated SKU: 64911050](https://maedler.in/product/slide-set-db-2132-slide-length-500mm-zinc-plated-and-black-passivated-sku-64911050/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 450mm zinc plated and black passivated SKU: 64911045](https://maedler.in/product/slide-set-db-2132-slide-length-450mm-zinc-plated-and-black-passivated-sku-64911045/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 400mm zinc plated and black passivated SKU: 64911040](https://maedler.in/product/slide-set-db-2132-slide-length-400mm-zinc-plated-and-black-passivated-sku-64911040/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 350mm zinc plated and black passivated SKU: 64911035](https://maedler.in/product/slide-set-db-2132-slide-length-350mm-zinc-plated-and-black-passivated-sku-64911035/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 300mm zinc plated and black passivated SKU: 64911030](https://maedler.in/product/slide-set-db-2132-slide-length-300mm-zinc-plated-and-black-passivated-sku-64911030/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide set DB 2132 slide length 250mm zinc plated and black passivated SKU: 64911025](https://maedler.in/product/slide-set-db-2132-slide-length-250mm-zinc-plated-and-black-passivated-sku-64911025/): Material: Slide elements: Cold rolled steel, zinc-plated and black passivated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel.Sold by pair (1 x product no. = 1 pair of slides).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position. Optional clip-on brackets available. Version zinc-plated and black passivated. Cam drawer adjust (3.1mm). Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. NoteRecommended fastening: M4 screw.Use all mounting positions to achieve the max. load ratings. - [Slide rail (single rail) DZ 4180 Slide length 2000mm zinc plated SKU: 64908200](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-2000mm-zinc-plated-sku-64908200/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1950mm zinc plated SKU: 64908195](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1950mm-zinc-plated-sku-64908195/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1900mm zinc plated SKU: 64908190](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1900mm-zinc-plated-sku-64908190/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1850mm zinc plated SKU: 64908185](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1850mm-zinc-plated-sku-64908185/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1800mm zinc plated SKU: 64908180](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1800mm-zinc-plated-sku-64908180/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1750mm zinc plated SKU: 64908175](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1750mm-zinc-plated-sku-64908175/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1700mm zinc plated SKU: 64908170](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1700mm-zinc-plated-sku-64908170/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1650mm zinc plated SKU: 64908165](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1650mm-zinc-plated-sku-64908165/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1600mm zinc plated SKU: 64908160](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1600mm-zinc-plated-sku-64908160/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1550mm zinc plated SKU: 64908155](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1550mm-zinc-plated-sku-64908155/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1500mm zinc plated SKU: 64908150](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1500mm-zinc-plated-sku-64908150/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1450mm zinc plated SKU: 64908145](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1450mm-zinc-plated-sku-64908145/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1400mm zinc plated SKU: 64908140](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1400mm-zinc-plated-sku-64908140/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1350mm zinc plated SKU: 64908135](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1350mm-zinc-plated-sku-64908135/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1300mm zinc plated SKU: 64908130](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1300mm-zinc-plated-sku-64908130/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1250mm zinc plated SKU: 64908125](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1250mm-zinc-plated-sku-64908125/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1200mm zinc plated SKU: 64908120](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1200mm-zinc-plated-sku-64908120/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1150mm zinc plated SKU: 64908115](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1150mm-zinc-plated-sku-64908115/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1100mm zinc plated SKU: 64908110](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1100mm-zinc-plated-sku-64908110/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1050mm zinc plated SKU: 64908105](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1050mm-zinc-plated-sku-64908105/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 1000mm zinc plated SKU: 64908100](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-1000mm-zinc-plated-sku-64908100/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 950mm zinc plated SKU: 64908095](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-950mm-zinc-plated-sku-64908095/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 900mm zinc plated SKU: 64908090](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-900mm-zinc-plated-sku-64908090/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 850mm zinc plated SKU: 64908085](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-850mm-zinc-plated-sku-64908085/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 800mm zinc plated SKU: 64908080](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-800mm-zinc-plated-sku-64908080/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 750mm zinc plated SKU: 64908075](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-750mm-zinc-plated-sku-64908075/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 700mm zinc plated SKU: 64908070](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-700mm-zinc-plated-sku-64908070/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 650mm zinc plated SKU: 64908065](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-650mm-zinc-plated-sku-64908065/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 600mm zinc plated SKU: 64908060](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-600mm-zinc-plated-sku-64908060/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 550mm zinc plated SKU: 64908055](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-550mm-zinc-plated-sku-64908055/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail (single rail) DZ 4180 Slide length 500mm zinc plated SKU: 64908050](https://maedler.in/product/slide-rail-single-rail-dz-4180-slide-length-500mm-zinc-plated-sku-64908050/): Material: Slide elements: Steel, bright zinc-plated. Ball retainers and Balls: Stainless Steel.Heavy Duty Telescopic ball bearing slides for applications in the industrial and electronics sector. Note: Sold singly.• Slides sold separately (singly, not by pair).• Very high load capacity up to 980 kg.• 10mm ball bearings for smooth running and stability• Service life 18,000 cycles.• Temperature range: -20°C to +110°C.Note: Recommended mount: The screw must meet a bolt strength of at least 8.8. Use all mounting positions to achieve the max. load rating.The slide must be loaded centrally. - [Slide rail DA 4120 (single rail) slide length 1200mm aluminium SKU: 64907120](https://maedler.in/product/slide-rail-da-4120-single-rail-slide-length-1200mm-aluminium-sku-64907120/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Sold singly (1 x product no. = 1 single slide). Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Single slides available (universal). Very high load capacity up to 438 kg. Good corrosion resistantce. Service life 5,000 / 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide rail DA 4120 (single rail) slide length 1100mm aluminium SKU: 64907110](https://maedler.in/product/slide-rail-da-4120-single-rail-slide-length-1100mm-aluminium-sku-64907110/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Sold singly (1 x product no. = 1 single slide). Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Single slides available (universal). Very high load capacity up to 438 kg. Good corrosion resistantce. Service life 5,000 / 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide rail DA 4120 (single rail) slide length 1000mm aluminium SKU: 64907100](https://maedler.in/product/slide-rail-da-4120-single-rail-slide-length-1000mm-aluminium-sku-64907100/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Sold singly (1 x product no. = 1 single slide). Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Single slides available (universal). Very high load capacity up to 438 kg. Good corrosion resistantce. Service life 5,000 / 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide rail DA 4120 (single rail) slide length 900mm aluminium SKU: 64907090](https://maedler.in/product/slide-rail-da-4120-single-rail-slide-length-900mm-aluminium-sku-64907090/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Sold singly (1 x product no. = 1 single slide). Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Single slides available (universal). Very high load capacity up to 438 kg. Good corrosion resistantce. Service life 5,000 / 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide rail DA 4120 (single rail) slide length 800mm aluminium SKU: 64907080](https://maedler.in/product/slide-rail-da-4120-single-rail-slide-length-800mm-aluminium-sku-64907080/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Sold singly (1 x product no. = 1 single slide). Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Single slides available (universal). Very high load capacity up to 438 kg. Good corrosion resistantce. Service life 5,000 / 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide rail DA 4120 (single rail) slide length 700mm aluminium SKU: 64907070](https://maedler.in/product/slide-rail-da-4120-single-rail-slide-length-700mm-aluminium-sku-64907070/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Sold singly (1 x product no. = 1 single slide). Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Single slides available (universal). Very high load capacity up to 438 kg. Good corrosion resistantce. Service life 5,000 / 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide rail DA 4120 (single rail) slide length 600mm aluminium SKU: 64907060](https://maedler.in/product/slide-rail-da-4120-single-rail-slide-length-600mm-aluminium-sku-64907060/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Sold singly (1 x product no. = 1 single slide). Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Single slides available (universal). Very high load capacity up to 438 kg. Good corrosion resistantce. Service life 5,000 / 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide rail DA 4120 (single rail) slide length 500mm aluminium SKU: 64907050](https://maedler.in/product/slide-rail-da-4120-single-rail-slide-length-500mm-aluminium-sku-64907050/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Sold singly (1 x product no. = 1 single slide). Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Single slides available (universal). Very high load capacity up to 438 kg. Good corrosion resistantce. Service life 5,000 / 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide rail DA 4120 (single rail) slide length 400mm aluminium SKU: 64907040](https://maedler.in/product/slide-rail-da-4120-single-rail-slide-length-400mm-aluminium-sku-64907040/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Sold singly (1 x product no. = 1 single slide). Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Single slides available (universal). Very high load capacity up to 438 kg. Good corrosion resistantce. Service life 5,000 / 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DZ 2109 slide length 700mm zinc plated SKU: 64906270](https://maedler.in/product/slide-set-dz-2109-slide-length-700mm-zinc-plated-sku-64906270/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position and Hold-out in open position. Height-adjustable bracket mount included. Optional clip-on brackets available. Version bright zinc-plated or black passivated. Especially long service life, up to 50,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw (included in delivery). Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2109 slide length 600mm zinc plated SKU: 64906260](https://maedler.in/product/slide-set-dz-2109-slide-length-600mm-zinc-plated-sku-64906260/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position and Hold-out in open position. Height-adjustable bracket mount included. Optional clip-on brackets available. Version bright zinc-plated or black passivated. Especially long service life, up to 50,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw (included in delivery). Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2109 slide length 550mm zinc plated SKU: 64906255](https://maedler.in/product/slide-set-dz-2109-slide-length-550mm-zinc-plated-sku-64906255/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position and Hold-out in open position. Height-adjustable bracket mount included. Optional clip-on brackets available. Version bright zinc-plated or black passivated. Especially long service life, up to 50,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw (included in delivery). Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2109 slide length 500mm zinc plated SKU: 64906250](https://maedler.in/product/slide-set-dz-2109-slide-length-500mm-zinc-plated-sku-64906250/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position and Hold-out in open position. Height-adjustable bracket mount included. Optional clip-on brackets available. Version bright zinc-plated or black passivated. Especially long service life, up to 50,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw (included in delivery). Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2109 slide length 450mm zinc plated SKU: 64906245](https://maedler.in/product/slide-set-dz-2109-slide-length-450mm-zinc-plated-sku-64906245/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position and Hold-out in open position. Height-adjustable bracket mount included. Optional clip-on brackets available. Version bright zinc-plated or black passivated. Especially long service life, up to 50,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw (included in delivery). Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2109 slide length 400mm zinc plated SKU: 64906240](https://maedler.in/product/slide-set-dz-2109-slide-length-400mm-zinc-plated-sku-64906240/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position and Hold-out in open position. Height-adjustable bracket mount included. Optional clip-on brackets available. Version bright zinc-plated or black passivated. Especially long service life, up to 50,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw (included in delivery). Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2109 slide length 350mm zinc plated SKU: 64906235](https://maedler.in/product/slide-set-dz-2109-slide-length-350mm-zinc-plated-sku-64906235/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position and Hold-out in open position. Height-adjustable bracket mount included. Optional clip-on brackets available. Version bright zinc-plated or black passivated. Especially long service life, up to 50,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw (included in delivery). Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 2109 slide length 300mm zinc plated SKU: 64906230](https://maedler.in/product/slide-set-dz-2109-slide-length-300mm-zinc-plated-sku-64906230/): Material: Slide elements: Cold rolled steel, zinc-plated or coated. Ball retainers: Cold rolled steel, zinc-plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Fast disconnection. Hold-in in the closed position and Hold-out in open position. Height-adjustable bracket mount included. Optional clip-on brackets available. Version bright zinc-plated or black passivated. Especially long service life, up to 50,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw (included in delivery). Use all mounting positions to achieve the max. load ratings. - [Slide set DZ 0522 slide length 900mm zinc plated SKU: 64905862](https://maedler.in/product/slide-set-dz-0522-slide-length-900mm-zinc-plated-sku-64905862/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Heavy-duty construction. Shock blocks offering protection against shock and vibration. Protective shroud prevents excessive contamination of the ball tracks. Mounting plates on inner and outer members. Service life 10,000 cycles (to 140 kg up to 40,000 cycles). Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screws on the inner , extending member. M6 screws on the outer, fixed menber. Use all mounting positions to achieve the max. load rating. overall length = slide length + 24mm. The cabinet and drawer must be designed to minimise any deflection and torsion of the slide. - [Slide set DZ 0522 slide length 600mm zinc plated SKU: 64905861](https://maedler.in/product/slide-set-dz-0522-slide-length-600mm-zinc-plated-sku-64905861/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Heavy-duty construction. Shock blocks offering protection against shock and vibration. Protective shroud prevents excessive contamination of the ball tracks. Mounting plates on inner and outer members. Service life 10,000 cycles (to 140 kg up to 40,000 cycles). Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screws on the inner , extending member. M6 screws on the outer, fixed menber. Use all mounting positions to achieve the max. load rating. overall length = slide length + 24mm. The cabinet and drawer must be designed to minimise any deflection and torsion of the slide. - [Slide set DZ 0522 slide length 457mm zinc plated SKU: 64905859](https://maedler.in/product/slide-set-dz-0522-slide-length-457mm-zinc-plated-sku-64905859/): Material: Slide elements: Cold rolled steel, zinc plated. Ball retainers: Cold rolled steel, zinc plated. Balls: Hardened steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Heavy-duty construction. Shock blocks offering protection against shock and vibration. Protective shroud prevents excessive contamination of the ball tracks. Mounting plates on inner and outer members. Service life 10,000 cycles (to 140 kg up to 40,000 cycles). Temperature range: -20°C to +110°C. Note Recommended fastening: M4 screws on the inner , extending member. M6 screws on the outer, fixed menber. Use all mounting positions to achieve the max. load rating. overall length = slide length + 24mm. The cabinet and drawer must be designed to minimise any deflection and torsion of the slide. - [slide rail DP 9301 E slide length 1219mm SKU: 64905748](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-1219mm-sku-64905748/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 1118mm SKU: 64905744](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-1118mm-sku-64905744/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 1067mm SKU: 64905742](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-1067mm-sku-64905742/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 1016mm SKU: 64905740](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-1016mm-sku-64905740/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 914mm SKU: 64905736](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-914mm-sku-64905736/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 864mm SKU: 64905734](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-864mm-sku-64905734/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 813mm SKU: 64905732](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-813mm-sku-64905732/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 762mm SKU: 64905730](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-762mm-sku-64905730/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 711mm SKU: 64905728](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-711mm-sku-64905728/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 660mm SKU: 64905726](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-660mm-sku-64905726/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 610mm SKU: 64905724](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-610mm-sku-64905724/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 559mm SKU: 64905722](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-559mm-sku-64905722/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 508mm SKU: 64905720](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-508mm-sku-64905720/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 457mm SKU: 64905718](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-457mm-sku-64905718/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 406mm SKU: 64905716](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-406mm-sku-64905716/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 356mm SKU: 64905714](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-356mm-sku-64905714/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 305mm SKU: 64905712](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-305mm-sku-64905712/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [slide rail DP 9301 E slide length 254mm SKU: 64905710](https://maedler.in/product/slide-rail-dp-9301-e-slide-length-254mm-sku-64905710/): Material: Slide elements: Cold rolled steel, zinc plated, with organic-mineral coating for high corrosion resistance. Ball retainers: Plastic. Balls: Hardened steel. Sold by piece (1 x product no. = 1 single slide).Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Slides sold separately. Good corrosion resistance. Lubricated with grease for food. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note: Recommended fastening: M5 / M6 screw. Screw head diameter max. 12.7 mm. Screw head height max. 4.8mm. Use all mounting positions to achieve the max. load ratings. - [Slide set DA 4165 slide length 1000mm aluminium SKU: 64905700](https://maedler.in/product/slide-set-da-4165-slide-length-1000mm-aluminium-sku-64905700/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Forward and return slide. For applications, that require access from both sides of a sliding unit. Very high load capacity up to 270 kg. Good corrosion resistantce. Only for vertical mounting. Service life 10,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DA 4165 slide length 900mm aluminium SKU: 64905690](https://maedler.in/product/slide-set-da-4165-slide-length-900mm-aluminium-sku-64905690/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Forward and return slide. For applications, that require access from both sides of a sliding unit. Very high load capacity up to 270 kg. Good corrosion resistantce. Only for vertical mounting. Service life 10,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DA 4165 slide length 800mm aluminium SKU: 64905680](https://maedler.in/product/slide-set-da-4165-slide-length-800mm-aluminium-sku-64905680/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Forward and return slide. For applications, that require access from both sides of a sliding unit. Very high load capacity up to 270 kg. Good corrosion resistantce. Only for vertical mounting. Service life 10,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DA 4165 slide length 700mm aluminium SKU: 64905670](https://maedler.in/product/slide-set-da-4165-slide-length-700mm-aluminium-sku-64905670/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Forward and return slide. For applications, that require access from both sides of a sliding unit. Very high load capacity up to 270 kg. Good corrosion resistantce. Only for vertical mounting. Service life 10,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DA 4165 slide length 600mm aluminium SKU: 64905660](https://maedler.in/product/slide-set-da-4165-slide-length-600mm-aluminium-sku-64905660/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Forward and return slide. For applications, that require access from both sides of a sliding unit. Very high load capacity up to 270 kg. Good corrosion resistantce. Only for vertical mounting. Service life 10,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DA 4165 slide length 500mm aluminium SKU: 64905650](https://maedler.in/product/slide-set-da-4165-slide-length-500mm-aluminium-sku-64905650/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Forward and return slide. For applications, that require access from both sides of a sliding unit. Very high load capacity up to 270 kg. Good corrosion resistantce. Only for vertical mounting. Service life 10,000 cycles. Temperature range: -20°C to +70°C. - [Slide set DA 4165 slide length 400mm aluminium SKU: 64905640](https://maedler.in/product/slide-set-da-4165-slide-length-400mm-aluminium-sku-64905640/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Forward and return slide. For applications, that require access from both sides of a sliding unit. Very high load capacity up to 270 kg. Good corrosion resistantce. Only for vertical mounting. Service life 10,000 cycles. Temperature range: -20°C to +70°C. - [Mounting bracket set DZ 634 for slides 9301, 9307 and 9308 bracket length 711mm 2 brackets with 4 bolts, nuts and washers SKU: 64905628](https://maedler.in/product/mounting-bracket-set-dz-634-for-slides-9301-9307-and-9308-bracket-length-711mm-2-brackets-with-4-bolts-nuts-and-washers-sku-64905628/): Material: Steel, zinc-plated. Sold by pair (1 x product no. = 1 pair of brackets). Bracket kits for side or bottom mounting. For selection see the one catalog page with selection table. Can be used for: Type 9301 / 9308. Each kit comprises: 2 brackets,and 4 hexagon screws 6.35mm with washers and nuts. per pair of slides, one pair of clip-on brackets is required. Recommended mounts: M4 screw. Temperature range: -20°C to +110°C. Ordering details: e.g.: Product no. 649 056 12, bracket accessory kit type 634, zinc plated, length 305mm. - [Mounting bracket set DZ 634 for slides 9301, 9307 and 9308 bracket length 559mm 2 brackets with 4 bolts, nuts and washers SKU: 64905622](https://maedler.in/product/mounting-bracket-set-dz-634-for-slides-9301-9307-and-9308-bracket-length-559mm-2-brackets-with-4-bolts-nuts-and-washers-sku-64905622/): Material: Steel, zinc-plated. Sold by pair (1 x product no. = 1 pair of brackets). Bracket kits for side or bottom mounting. For selection see the one catalog page with selection table. Can be used for: Type 9301 / 9308. Each kit comprises: 2 brackets,and 4 hexagon screws 6.35mm with washers and nuts. per pair of slides, one pair of clip-on brackets is required. Recommended mounts: M4 screw. Temperature range: -20°C to +110°C. Ordering details: e.g.: Product no. 649 056 12, bracket accessory kit type 634, zinc plated, length 305mm. - [Mounting bracket set DZ 634 for slides 9301, 9307 and 9308 bracket length 406mm 2 brackets with 4 bolts, nuts and washers SKU: 64905616](https://maedler.in/product/mounting-bracket-set-dz-634-for-slides-9301-9307-and-9308-bracket-length-406mm-2-brackets-with-4-bolts-nuts-and-washers-sku-64905616/): Material: Steel, zinc-plated. Sold by pair (1 x product no. = 1 pair of brackets). Bracket kits for side or bottom mounting. For selection see the one catalog page with selection table. Can be used for: Type 9301 / 9308. Each kit comprises: 2 brackets,and 4 hexagon screws 6.35mm with washers and nuts. per pair of slides, one pair of clip-on brackets is required. Recommended mounts: M4 screw. Temperature range: -20°C to +110°C. Ordering details: e.g.: Product no. 649 056 12, bracket accessory kit type 634, zinc plated, length 305mm. - [Mounting bracket set DZ 634 for slides 9301, 9307 and 9308 bracket length 305mm 2 brackets with 4 bolts, nuts and washers SKU: 64905612](https://maedler.in/product/mounting-bracket-set-dz-634-for-slides-9301-9307-and-9308-bracket-length-305mm-2-brackets-with-4-bolts-nuts-and-washers-sku-64905612/): Material: Steel, zinc-plated. Sold by pair (1 x product no. = 1 pair of brackets). Bracket kits for side or bottom mounting. For selection see the one catalog page with selection table. Can be used for: Type 9301 / 9308. Each kit comprises: 2 brackets,and 4 hexagon screws 6.35mm with washers and nuts. per pair of slides, one pair of clip-on brackets is required. Recommended mounts: M4 screw. Temperature range: -20°C to +110°C. Ordering details: e.g.: Product no. 649 056 12, bracket accessory kit type 634, zinc plated, length 305mm. - [Slide set DA 4160 slide length 1000mm aluminium SKU: 64905600](https://maedler.in/product/slide-set-da-4160-slide-length-1000mm-aluminium-sku-64905600/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 900mm aluminium SKU: 64905590](https://maedler.in/product/slide-set-da-4160-slide-length-900mm-aluminium-sku-64905590/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 800mm aluminium SKU: 64905580](https://maedler.in/product/slide-set-da-4160-slide-length-800mm-aluminium-sku-64905580/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 700mm aluminium SKU: 64905570](https://maedler.in/product/slide-set-da-4160-slide-length-700mm-aluminium-sku-64905570/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 650mm aluminium SKU: 64905565](https://maedler.in/product/slide-set-da-4160-slide-length-650mm-aluminium-sku-64905565/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 600mm aluminium SKU: 64905560](https://maedler.in/product/slide-set-da-4160-slide-length-600mm-aluminium-sku-64905560/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 550mm aluminium SKU: 64905555](https://maedler.in/product/slide-set-da-4160-slide-length-550mm-aluminium-sku-64905555/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 500mm aluminium SKU: 64905550](https://maedler.in/product/slide-set-da-4160-slide-length-500mm-aluminium-sku-64905550/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [Slide set DA 4160 slide length 450mm aluminium SKU: 64905545](https://maedler.in/product/slide-set-da-4160-slide-length-450mm-aluminium-sku-64905545/): Material: Slide elements: Aluminium, corrosion resistant. Ball retainers and balls: Stainless steel. Heavy-duty telescopic ball bearing slides for applications in the industrial sector. Very high load capacity up to 300 kg. Good corrosion resistantce. Only for vertical mounting.Service life 10,000 cycles. Temperature range: -20°C to +110°C. - [One-piece clamp coupling MAS both sides bore 12mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099612](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-12mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099612/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 10mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099610](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-10mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099610/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 8mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099608](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-8mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099608/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 6mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099606](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-6mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099606/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 5mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099605](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-5mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099605/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 4mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099604](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-4mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099604/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 3mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099603](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-3mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099603/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Set-screw coupling TR bore 50mm with keyway stainless steel 1.4305 SKU: 60099250](https://maedler.in/product/set-screw-coupling-tr-bore-50mm-with-keyway-stainless-steel-1-4305-sku-60099250/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 40mm with keyway stainless steel 1.4305 SKU: 60099240](https://maedler.in/product/set-screw-coupling-tr-bore-40mm-with-keyway-stainless-steel-1-4305-sku-60099240/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 35mm with keyway stainless steel 1.4305 SKU: 60099235](https://maedler.in/product/set-screw-coupling-tr-bore-35mm-with-keyway-stainless-steel-1-4305-sku-60099235/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 30mm with keyway stainless steel 1.4305 SKU: 60099230](https://maedler.in/product/set-screw-coupling-tr-bore-30mm-with-keyway-stainless-steel-1-4305-sku-60099230/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 25mm with keyway stainless steel 1.4305 SKU: 60099225](https://maedler.in/product/set-screw-coupling-tr-bore-25mm-with-keyway-stainless-steel-1-4305-sku-60099225/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 20mm with keyway stainless steel 1.4305 SKU: 60099220](https://maedler.in/product/set-screw-coupling-tr-bore-20mm-with-keyway-stainless-steel-1-4305-sku-60099220/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 16mm with keyway stainless steel 1.4305 SKU: 60099216](https://maedler.in/product/set-screw-coupling-tr-bore-16mm-with-keyway-stainless-steel-1-4305-sku-60099216/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 15mm with keyway stainless steel 1.4305 SKU: 60099215](https://maedler.in/product/set-screw-coupling-tr-bore-15mm-with-keyway-stainless-steel-1-4305-sku-60099215/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 14mm with keyway stainless steel 1.4305 SKU: 60099214](https://maedler.in/product/set-screw-coupling-tr-bore-14mm-with-keyway-stainless-steel-1-4305-sku-60099214/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 12mm with keyway stainless steel 1.4305 SKU: 60099212](https://maedler.in/product/set-screw-coupling-tr-bore-12mm-with-keyway-stainless-steel-1-4305-sku-60099212/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 10mm with keyway stainless steel 1.4305 SKU: 60099210](https://maedler.in/product/set-screw-coupling-tr-bore-10mm-with-keyway-stainless-steel-1-4305-sku-60099210/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 8mm with keyway stainless steel 1.4305 SKU: 60099208](https://maedler.in/product/set-screw-coupling-tr-bore-8mm-with-keyway-stainless-steel-1-4305-sku-60099208/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 6mm with keyway stainless steel 1.4305 SKU: 60099206](https://maedler.in/product/set-screw-coupling-tr-bore-6mm-with-keyway-stainless-steel-1-4305-sku-60099206/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. - [Set-screw coupling TR bore 40mm without keyway stainless steel 1.4305 SKU: 60099140](https://maedler.in/product/set-screw-coupling-tr-bore-40mm-without-keyway-stainless-steel-1-4305-sku-60099140/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 35mm without keyway stainless steel 1.4305 SKU: 60099135](https://maedler.in/product/set-screw-coupling-tr-bore-35mm-without-keyway-stainless-steel-1-4305-sku-60099135/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 30mm without keyway stainless steel 1.4305 SKU: 60099130](https://maedler.in/product/set-screw-coupling-tr-bore-30mm-without-keyway-stainless-steel-1-4305-sku-60099130/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 25mm without keyway stainless steel 1.4305 SKU: 60099125](https://maedler.in/product/set-screw-coupling-tr-bore-25mm-without-keyway-stainless-steel-1-4305-sku-60099125/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 20mm without keyway stainless steel 1.4305 SKU: 60099120](https://maedler.in/product/set-screw-coupling-tr-bore-20mm-without-keyway-stainless-steel-1-4305-sku-60099120/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 16mm without keyway stainless steel 1.4305 SKU: 60099116](https://maedler.in/product/set-screw-coupling-tr-bore-16mm-without-keyway-stainless-steel-1-4305-sku-60099116/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 15mm without keyway stainless steel 1.4305 SKU: 60099115](https://maedler.in/product/set-screw-coupling-tr-bore-15mm-without-keyway-stainless-steel-1-4305-sku-60099115/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 14mm without keyway stainless steel 1.4305 SKU: 60099114](https://maedler.in/product/set-screw-coupling-tr-bore-14mm-without-keyway-stainless-steel-1-4305-sku-60099114/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 12mm without keyway stainless steel 1.4305 SKU: 60099112](https://maedler.in/product/set-screw-coupling-tr-bore-12mm-without-keyway-stainless-steel-1-4305-sku-60099112/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 10mm without keyway stainless steel 1.4305 SKU: 60099110](https://maedler.in/product/set-screw-coupling-tr-bore-10mm-without-keyway-stainless-steel-1-4305-sku-60099110/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 8mm without keyway stainless steel 1.4305 SKU: 60099108](https://maedler.in/product/set-screw-coupling-tr-bore-8mm-without-keyway-stainless-steel-1-4305-sku-60099108/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Set-screw coupling TR bore 6mm without keyway stainless steel 1.4305 SKU: 60099106](https://maedler.in/product/set-screw-coupling-tr-bore-6mm-without-keyway-stainless-steel-1-4305-sku-60099106/): Material: Stainless steel 1.4305 (AISI 303). These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft. - [Two-piece clamp coupling MAT both sides bore 50mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60095000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-50mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60095000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 40mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60094000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-40mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60094000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 35mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60093500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-35mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60093500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 30mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60093000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-30mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60093000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 25mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60092500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-25mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60092500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 20mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60092000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-20mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60092000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm shielded on both sides SKU: 6009-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-shielded-on-both-sides-sku-6009-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm shielded on both sides clearance C3 SKU: 6009-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-shielded-on-both-sides-clearance-c3-sku-6009-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm sealed on both sides SKU: 6009-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-sealed-on-both-sides-sku-6009-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm sealed on both sides clearance C3 SKU: 6009-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-sealed-on-both-sides-clearance-c3-sku-6009-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm sealed on both sides SKU: 6009-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-sealed-on-both-sides-sku-6009-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Two-piece clamp coupling MAT both sides bore 19mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091900](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-19mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091900/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 16mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091600](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-16mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091600/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 15mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-15mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 14mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091400](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-14mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091400/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 12mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091200](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-12mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091200/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 10mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60091000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-10mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60091000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 8mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60090800](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-8mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60090800/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 6mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60090600](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-6mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60090600/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm shielded on both sides SKU: 6009-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-shielded-on-both-sides-sku-6009-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm open (unsealed) SKU: 6009-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-open-unsealed-sku-6009-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 45mm outer diameter 75mm width 16mm open (unsealed) clearance C3 SKU: 6009-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-75mm-width-16mm-open-unsealed-clearance-c3-sku-6009-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Two-piece clamp coupling MAT both sides bore 50mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60085000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-50mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60085000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 40mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60084000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-40mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60084000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 35mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60083500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-35mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60083500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 30mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60083000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-30mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60083000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 25mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60082500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-25mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60082500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 20mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60082000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-20mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60082000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm shielded on both sides SKU: 6008-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-shielded-on-both-sides-sku-6008-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm shielded on both sides clearance C3 SKU: 6008-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-shielded-on-both-sides-clearance-c3-sku-6008-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm sealed on both sides SKU: 6008-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-sealed-on-both-sides-sku-6008-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm sealed on both sides clearance C3 SKU: 6008-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-sealed-on-both-sides-clearance-c3-sku-6008-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm sealed on both sides SKU: 6008-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-sealed-on-both-sides-sku-6008-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Two-piece clamp coupling MAT both sides bore 19mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081900](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-19mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081900/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 16mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081600](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-16mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081600/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 15mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-15mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 14mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081400](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-14mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081400/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 12mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081200](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-12mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081200/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 10mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60081000](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-10mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60081000/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 8mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080800](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-8mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080800/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 6mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080600](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-6mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080600/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 5mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080500](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-5mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080500/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 4mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080400](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-4mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080400/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 3mm without keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60080300](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-3mm-without-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60080300/): Material: Steel C45, black oxide finish. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm shielded on both sides SKU: 6008-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-shielded-on-both-sides-sku-6008-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm open (unsealed) SKU: 6008-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-open-unsealed-sku-6008-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 40mm outer diameter 68mm width 15mm open (unsealed) clearance C3 SKU: 6008-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-68mm-width-15mm-open-unsealed-clearance-c3-sku-6008-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [One-piece clamp coupling MAS both sides bore 50mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60075000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-50mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60075000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 40mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60074000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-40mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60074000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 35mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60073500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-35mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60073500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 30mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60073000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-30mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60073000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 25mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60072500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-25mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60072500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 20mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60072000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-20mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60072000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm shielded on both sides SKU: 6007-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-shielded-on-both-sides-sku-6007-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm shielded on both sides clearance C3 SKU: 6007-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-shielded-on-both-sides-clearance-c3-sku-6007-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm sealed on both sides SKU: 6007-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-sealed-on-both-sides-sku-6007-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm sealed on both sides clearance C3 SKU: 6007-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-sealed-on-both-sides-clearance-c3-sku-6007-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm sealed on both sides SKU: 6007-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-sealed-on-both-sides-sku-6007-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [One-piece clamp coupling MAS both sides bore 19mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071900](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-19mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071900/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 16mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071600](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-16mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071600/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 15mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071500](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-15mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071500/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 14mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071400](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-14mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071400/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 12mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071200](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-12mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071200/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 10mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60071000](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-10mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60071000/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 8mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60070800](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-8mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60070800/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 6mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9 SKU: 60070600](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-6mm-with-keyway-steel-c45-black-oxide-finished-with-bolts-din-912-12-9-sku-60070600/): Material: Steel C45 burnished. Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - 12.9 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm shielded on both sides SKU: 6007-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-shielded-on-both-sides-sku-6007-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 35mm outer diameter 62mm width 14mm open (unsealed) SKU: 6007-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-62mm-width-14mm-open-unsealed-sku-6007-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 19 teeth material steel for taper bush typ 2517 SKU: 10977119](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-19-teeth-material-steel-for-taper-bush-typ-2517-sku-10977119/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 18 teeth material steel for taper bush typ 2517 SKU: 10977118](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-18-teeth-material-steel-for-taper-bush-typ-2517-sku-10977118/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 17 teeth material steel for taper bush typ 2517 SKU: 10977117](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-17-teeth-material-steel-for-taper-bush-typ-2517-sku-10977117/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 16 teeth material steel for taper bush typ 2517 SKU: 10977116](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-16-teeth-material-steel-for-taper-bush-typ-2517-sku-10977116/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 15 teeth material steel for taper bush typ 2517 SKU: 10977115](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-15-teeth-material-steel-for-taper-bush-typ-2517-sku-10977115/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 14 teeth material steel for taper bush typ 2012 SKU: 10977114](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-14-teeth-material-steel-for-taper-bush-typ-2012-sku-10977114/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 13 teeth material steel for taper bush typ 2012 SKU: 10977113](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-13-teeth-material-steel-for-taper-bush-typ-2012-sku-10977113/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 57 teeth material steel SKU: 10925700](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-57-teeth-material-steel-sku-10925700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 54 teeth material steel SKU: 10925400](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-54-teeth-material-steel-sku-10925400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 48 teeth material steel SKU: 10924800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-48-teeth-material-steel-sku-10924800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 45 teeth material steel SKU: 10924500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-45-teeth-material-steel-sku-10924500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 40 teeth material steel SKU: 10924000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-40-teeth-material-steel-sku-10924000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 38 teeth material steel SKU: 10923800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-38-teeth-material-steel-sku-10923800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 35 teeth material steel SKU: 10923500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-35-teeth-material-steel-sku-10923500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 30 teeth material steel SKU: 10923000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-30-teeth-material-steel-sku-10923000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 27 teeth material steel SKU: 10922700](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-27-teeth-material-steel-sku-10922700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 25 teeth material steel SKU: 10922500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-25-teeth-material-steel-sku-10922500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 24 teeth material steel SKU: 10922400](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-24-teeth-material-steel-sku-10922400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 23 teeth material steel SKU: 10922300](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-23-teeth-material-steel-sku-10922300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 22 teeth material steel SKU: 10922200](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-22-teeth-material-steel-sku-10922200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 21 teeth material steel SKU: 10922100](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-21-teeth-material-steel-sku-10922100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 20 teeth material steel SKU: 10922000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-sku-10922000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 19 teeth material steel SKU: 10921900](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-sku-10921900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 18 teeth material steel SKU: 10921800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-sku-10921800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 17 teeth material steel SKU: 10921700](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-sku-10921700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 16 teeth material steel SKU: 10921600](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-sku-10921600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 15 teeth material steel SKU: 10921500](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-sku-10921500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 14 teeth material steel SKU: 10921400](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-sku-10921400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 13 teeth material steel SKU: 10921300](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-sku-10921300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 12 teeth material steel SKU: 10921200](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-sku-10921200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 11 teeth material steel SKU: 10921100](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-sku-10921100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 10 teeth material steel SKU: 10921000](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-sku-10921000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 9 teeth material steel SKU: 10920900](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-9-teeth-material-steel-sku-10920900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 8 teeth material steel SKU: 10920800](https://maedler.in/product/plate-wheel-krl-without-hub-20-b-1-1-1-4x3-4-8-teeth-material-steel-sku-10920800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 76 teeth material cast iron SKU: 10917600](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-76-teeth-material-cast-iron-sku-10917600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 57 teeth material cast iron SKU: 10915700](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-57-teeth-material-cast-iron-sku-10915700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 45 teeth material cast iron SKU: 10914500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-45-teeth-material-cast-iron-sku-10914500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 38 teeth material cast iron SKU: 10913800](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-38-teeth-material-cast-iron-sku-10913800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 35 teeth material steel SKU: 10913500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-35-teeth-material-steel-sku-10913500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 30 teeth material steel SKU: 10913000](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-30-teeth-material-steel-sku-10913000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 27 teeth material steel SKU: 10912700](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-27-teeth-material-steel-sku-10912700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 25 teeth material steel SKU: 10912500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-25-teeth-material-steel-sku-10912500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 23 teeth material steel SKU: 10912300](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-23-teeth-material-steel-sku-10912300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 21 teeth material steel SKU: 10912100](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-21-teeth-material-steel-sku-10912100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 20 teeth material steel SKU: 10912000](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-sku-10912000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 19 teeth material steel SKU: 10911900](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-sku-10911900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 18 teeth material steel SKU: 10911800](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-sku-10911800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 17 teeth material steel SKU: 10911700](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-sku-10911700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 16 teeth material steel SKU: 10911600](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-sku-10911600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 15 teeth material steel SKU: 10911500](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-sku-10911500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 14 teeth material steel SKU: 10911400](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-sku-10911400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 13 teeth material steel SKU: 10911300](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-sku-10911300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 12 teeth material steel SKU: 10911200](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-sku-10911200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 11 teeth material steel SKU: 10911100](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-sku-10911100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 10 teeth material steel SKU: 10911000](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-sku-10911000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 9 teeth material steel SKU: 10910900](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steel-sku-10910900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRS with hub 20 B-1 1 1/4x3/4" 8 teeth material steel SKU: 10910800](https://maedler.in/product/sprocket-krs-with-hub-20-b-1-1-1-4x3-4-8-teeth-material-steel-sku-10910800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 38 teeth and more are made from grey cast iron GG25.Sprocket with 35 teeth has a welded hub. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm.Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899130](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899125](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 24 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899124](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-24-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899124/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 23 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899123](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-23-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899123/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 22 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899122](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-22-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899122/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 21 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899121](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-21-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899121/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899120](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 19 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899119](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-19-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899119/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 18 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899118](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-18-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899118/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 17 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899117](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-17-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899117/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 16 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899116](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-16-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899116/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899115](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 14 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899114](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-14-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899114/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899113](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRR with hub 16 B-1 1"x17.02mm 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10899112](https://maedler.in/product/sprocket-krr-with-hub-16-b-1-1x17-02mm-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10899112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 40 teeth material steel teeth induction hardened SKU: 10888140](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-40-teeth-material-steel-teeth-induction-hardened-sku-10888140/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 38 teeth material steel teeth induction hardened SKU: 10888138](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-38-teeth-material-steel-teeth-induction-hardened-sku-10888138/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 36 teeth material steel teeth induction hardened SKU: 10888136](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-36-teeth-material-steel-teeth-induction-hardened-sku-10888136/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 35 teeth material steel teeth induction hardened SKU: 10888135](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-35-teeth-material-steel-teeth-induction-hardened-sku-10888135/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 34 teeth material steel teeth induction hardened SKU: 10888134](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-34-teeth-material-steel-teeth-induction-hardened-sku-10888134/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 32 teeth material steel teeth induction hardened SKU: 10888132](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-32-teeth-material-steel-teeth-induction-hardened-sku-10888132/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 30 teeth material steel teeth induction hardened SKU: 10888130](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-30-teeth-material-steel-teeth-induction-hardened-sku-10888130/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 28 teeth material steel teeth induction hardened SKU: 10888128](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-28-teeth-material-steel-teeth-induction-hardened-sku-10888128/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 27 teeth material steel teeth induction hardened SKU: 10888127](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-27-teeth-material-steel-teeth-induction-hardened-sku-10888127/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 26 teeth material steel teeth induction hardened SKU: 10888126](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-26-teeth-material-steel-teeth-induction-hardened-sku-10888126/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 25 teeth material steel teeth induction hardened SKU: 10888125](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-25-teeth-material-steel-teeth-induction-hardened-sku-10888125/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 24 teeth material steel teeth induction hardened SKU: 10888124](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-24-teeth-material-steel-teeth-induction-hardened-sku-10888124/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 23 teeth material steel teeth induction hardened SKU: 10888123](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-23-teeth-material-steel-teeth-induction-hardened-sku-10888123/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 22 teeth material steel teeth induction hardened SKU: 10888122](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-22-teeth-material-steel-teeth-induction-hardened-sku-10888122/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 21 teeth material steel teeth induction hardened SKU: 10888121](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-21-teeth-material-steel-teeth-induction-hardened-sku-10888121/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 20 teeth material steel teeth induction hardened SKU: 10888120](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-20-teeth-material-steel-teeth-induction-hardened-sku-10888120/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 19 teeth material steel teeth induction hardened SKU: 10888119](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-19-teeth-material-steel-teeth-induction-hardened-sku-10888119/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 18 teeth material steel teeth induction hardened SKU: 10888118](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-18-teeth-material-steel-teeth-induction-hardened-sku-10888118/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 17 teeth material steel teeth induction hardened SKU: 10888117](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-17-teeth-material-steel-teeth-induction-hardened-sku-10888117/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 16 teeth material steel teeth induction hardened SKU: 10888116](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-16-teeth-material-steel-teeth-induction-hardened-sku-10888116/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 15 teeth material steel teeth induction hardened SKU: 10888115](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-15-teeth-material-steel-teeth-induction-hardened-sku-10888115/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 14 teeth material steel teeth induction hardened SKU: 10888114](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-14-teeth-material-steel-teeth-induction-hardened-sku-10888114/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 13 teeth material steel teeth induction hardened SKU: 10888113](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-13-teeth-material-steel-teeth-induction-hardened-sku-10888113/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 12 teeth material steel teeth induction hardened SKU: 10888112](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-12-teeth-material-steel-teeth-induction-hardened-sku-10888112/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 11 teeth material steel teeth induction hardened SKU: 10888111](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-11-teeth-material-steel-teeth-induction-hardened-sku-10888111/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 10 teeth material steel teeth induction hardened SKU: 10888110](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-10-teeth-material-steel-teeth-induction-hardened-sku-10888110/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 9 teeth material steel teeth induction hardened SKU: 10888109](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-9-teeth-material-steel-teeth-induction-hardened-sku-10888109/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Sprocket KRG with hub 16 B-1 1"x17,02mm 8 teeth material steel teeth induction hardened SKU: 10888108](https://maedler.in/product/sprocket-krg-with-hub-16-b-1-1x1702mm-8-teeth-material-steel-teeth-induction-hardened-sku-10888108/): Material: Steel C45, teeth induction hardened (≈ HRC 50). Pre-bored. General dimensions: B1 = 16,2 mm, c = 2,5 mm, r3 = 26 mm. Other dimensions: See the table. - [Track for linear guide DA 0118 RC aluminium length 2400mm SKU: 64980524](https://maedler.in/product/track-for-linear-guide-da-0118-rc-aluminium-length-2400mm-sku-64980524/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Track for linear guide DA 0118 RC aluminium length 1800mm with mounting holes hole center distance 120mm SKU: 64980518H](https://maedler.in/product/track-for-linear-guide-da-0118-rc-aluminium-length-1800mm-with-mounting-holes-hole-center-distance-120mm-sku-64980518h/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Track for linear guide DA 0118 RC aluminium length 1800mm SKU: 64980518](https://maedler.in/product/track-for-linear-guide-da-0118-rc-aluminium-length-1800mm-sku-64980518/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Track for linear guide DA 0118 RC aluminium length 1200mm with mounting holes hole center distance 120mm SKU: 64980512H](https://maedler.in/product/track-for-linear-guide-da-0118-rc-aluminium-length-1200mm-with-mounting-holes-hole-center-distance-120mm-sku-64980512h/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Track for linear guide DA 0118 RC aluminium length 1200mm SKU: 64980512](https://maedler.in/product/track-for-linear-guide-da-0118-rc-aluminium-length-1200mm-sku-64980512/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Track for linear guide DA 0118 RC aluminium length 600mm with mounting holes hole center distance 120mm SKU: 64980506H](https://maedler.in/product/track-for-linear-guide-da-0118-rc-aluminium-length-600mm-with-mounting-holes-hole-center-distance-120mm-sku-64980506h/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Track for linear guide DA 0118 RC aluminium length 600mm SKU: 64980506](https://maedler.in/product/track-for-linear-guide-da-0118-rc-aluminium-length-600mm-sku-64980506/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [End stop kit for linear guide DA 0118 RC 2 pieces with 2 screws for the threaded center hole SKU: 64980503](https://maedler.in/product/end-stop-kit-for-linear-guide-da-0118-rc-2-pieces-with-2-screws-for-the-threaded-center-hole-sku-64980503/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Carriage with polymer balls for linear guide DA 0118 RC SKU: 64980502](https://maedler.in/product/carriage-with-polymer-balls-for-linear-guide-da-0118-rc-sku-64980502/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Carriage with stainless steel balls for linear guide DA 0118 RC SKU: 64980501](https://maedler.in/product/carriage-with-stainless-steel-balls-for-linear-guide-da-0118-rc-sku-64980501/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Track for linear guide DFG 115 aluminium length 2000mm SKU: 64970720](https://maedler.in/product/track-for-linear-guide-dfg-115-aluminium-length-2000mm-sku-64970720/): Material: Track and carriage from aluminium, hard anodised. Plain bearings from advanced technical polymer.Linear guide for universal use.Video clip (2.5 minutes) for illustrating All parts have to be ordered seperately. Dimensionally interchangeable with rolling bearing linear motion guides ISO 12090 size 15. Three types of carriages on choice: non-adjustable / manual adjustable / automatic adjustment. Four track lenghts on choice (for to cut by the customer). Several carriages can be used on one track. Resistant against corrosion, suitable for high pressure wash down. Long service life, maintenance-free. Temperature range: -40°C to +90°C. Note: Two or more tracks can be butted together to create a longer track. Misaligned tracks will cause excessive wear on the guides. Please see catalog page (PDF). - [Track for linear guide DFG 115 aluminium length 1500mm SKU: 64970715](https://maedler.in/product/track-for-linear-guide-dfg-115-aluminium-length-1500mm-sku-64970715/): Material: Track and carriage from aluminium, hard anodised. Plain bearings from advanced technical polymer.Linear guide for universal use.Video clip (2.5 minutes) for illustrating All parts have to be ordered seperately. Dimensionally interchangeable with rolling bearing linear motion guides ISO 12090 size 15. Three types of carriages on choice: non-adjustable / manual adjustable / automatic adjustment. Four track lenghts on choice (for to cut by the customer). Several carriages can be used on one track. Resistant against corrosion, suitable for high pressure wash down. Long service life, maintenance-free. Temperature range: -40°C to +90°C. Note: Two or more tracks can be butted together to create a longer track. Misaligned tracks will cause excessive wear on the guides. Please see catalog page (PDF). - [Track for linear guide DFG 115 aluminium length 1000mm SKU: 64970710](https://maedler.in/product/track-for-linear-guide-dfg-115-aluminium-length-1000mm-sku-64970710/): Material: Track and carriage from aluminium, hard anodised. Plain bearings from advanced technical polymer.Linear guide for universal use.Video clip (2.5 minutes) for illustrating All parts have to be ordered seperately. Dimensionally interchangeable with rolling bearing linear motion guides ISO 12090 size 15. Three types of carriages on choice: non-adjustable / manual adjustable / automatic adjustment. Four track lenghts on choice (for to cut by the customer). Several carriages can be used on one track. Resistant against corrosion, suitable for high pressure wash down. Long service life, maintenance-free. Temperature range: -40°C to +90°C. Note: Two or more tracks can be butted together to create a longer track. Misaligned tracks will cause excessive wear on the guides. Please see catalog page (PDF). - [Track for linear guide DFG 115 aluminium length 500mm SKU: 64970705](https://maedler.in/product/track-for-linear-guide-dfg-115-aluminium-length-500mm-sku-64970705/): Material: Track and carriage from aluminium, hard anodised. Plain bearings from advanced technical polymer.Linear guide for universal use.Video clip (2.5 minutes) for illustrating All parts have to be ordered seperately. Dimensionally interchangeable with rolling bearing linear motion guides ISO 12090 size 15. Three types of carriages on choice: non-adjustable / manual adjustable / automatic adjustment. Four track lenghts on choice (for to cut by the customer). Several carriages can be used on one track. Resistant against corrosion, suitable for high pressure wash down. Long service life, maintenance-free. Temperature range: -40°C to +90°C. Note: Two or more tracks can be butted together to create a longer track. Misaligned tracks will cause excessive wear on the guides. Please see catalog page (PDF). - [Carriage automatic adjustment DFG115-CASSAA SKU: 64970703](https://maedler.in/product/carriage-automatic-adjustment-dfg115-cassaa-sku-64970703/): Material: Track and carriage from aluminium, hard anodised. Plain bearings from advanced technical polymer.Linear guide for universal use.Video clip (2.5 minutes) for illustrating All parts have to be ordered seperately. Dimensionally interchangeable with rolling bearing linear motion guides ISO 12090 size 15. Three types of carriages on choice: non-adjustable / manual adjustable / automatic adjustment. Four track lenghts on choice (for to cut by the customer). Several carriages can be used on one track. Resistant against corrosion, suitable for high pressure wash down. Long service life, maintenance-free. Temperature range: -40°C to +90°C. Note: Two or more tracks can be butted together to create a longer track. Misaligned tracks will cause excessive wear on the guides. Please see catalog page (PDF). - [Carriage manual adjustable DFG115-CASSMA SKU: 64970702](https://maedler.in/product/carriage-manual-adjustable-dfg115-cassma-sku-64970702/): Material: Track and carriage from aluminium, hard anodised. Plain bearings from advanced technical polymer.Linear guide for universal use.Video clip (2.5 minutes) for illustrating All parts have to be ordered seperately. Dimensionally interchangeable with rolling bearing linear motion guides ISO 12090 size 15. Three types of carriages on choice: non-adjustable / manual adjustable / automatic adjustment. Four track lenghts on choice (for to cut by the customer). Several carriages can be used on one track. Resistant against corrosion, suitable for high pressure wash down. Long service life, maintenance-free. Temperature range: -40°C to +90°C. Note: Two or more tracks can be butted together to create a longer track. Misaligned tracks will cause excessive wear on the guides. Please see catalog page (PDF). - [Carriage non adjustable DFG115-CASSNA SKU: 64970701](https://maedler.in/product/carriage-non-adjustable-dfg115-cassna-sku-64970701/): Material: Track and carriage from aluminium, hard anodised. Plain bearings from advanced technical polymer.Linear guide for universal use.Video clip (2.5 minutes) for illustrating All parts have to be ordered seperately. Dimensionally interchangeable with rolling bearing linear motion guides ISO 12090 size 15. Three types of carriages on choice: non-adjustable / manual adjustable / automatic adjustment. Four track lenghts on choice (for to cut by the customer). Several carriages can be used on one track. Resistant against corrosion, suitable for high pressure wash down. Long service life, maintenance-free. Temperature range: -40°C to +90°C. Note: Two or more tracks can be butted together to create a longer track. Misaligned tracks will cause excessive wear on the guides. Please see catalog page (PDF). - [Carriage for Miniature profile rail guide HQ stainless rail width 15mm SKU: 64970589](https://maedler.in/product/carriage-for-miniature-profile-rail-guide-hq-stainless-rail-width-15mm-sku-64970589/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 15mm length 600mm overall height 16mm 2 carriages SKU: 64970585](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-15mm-length-600mm-overall-height-16mm-2-carriages-sku-64970585/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 15mm length 600mm overall height 16mm 1 carriage SKU: 64970584](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-15mm-length-600mm-overall-height-16mm-1-carriage-sku-64970584/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 15mm length 400mm overall height 16mm 2 carriages SKU: 64970583](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-15mm-length-400mm-overall-height-16mm-2-carriages-sku-64970583/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 15mm length 400mm overall height 16mm 1 carriage SKU: 64970582](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-15mm-length-400mm-overall-height-16mm-1-carriage-sku-64970582/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 15mm length 300mm overall height 16mm 2 carriages SKU: 64970581](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-15mm-length-300mm-overall-height-16mm-2-carriages-sku-64970581/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 15mm length 300mm overall height 16mm 1 carriage SKU: 64970580](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-15mm-length-300mm-overall-height-16mm-1-carriage-sku-64970580/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Carriage for Miniature profile rail guide HQ stainless rail width 12mm SKU: 64970579](https://maedler.in/product/carriage-for-miniature-profile-rail-guide-hq-stainless-rail-width-12mm-sku-64970579/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 12mm length 500mm overall height 13mm 2 carriages SKU: 64970575](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-12mm-length-500mm-overall-height-13mm-2-carriages-sku-64970575/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 12mm length 500mm overall height 13mm 1 carriage SKU: 64970574](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-12mm-length-500mm-overall-height-13mm-1-carriage-sku-64970574/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 12mm length 400mm overall height 13mm 2 carriages SKU: 64970573](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-12mm-length-400mm-overall-height-13mm-2-carriages-sku-64970573/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 12mm length 400mm overall height 13mm 1 carriage SKU: 64970572](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-12mm-length-400mm-overall-height-13mm-1-carriage-sku-64970572/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 12mm length 300mm overall height 13mm 2 carriages SKU: 64970571](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-12mm-length-300mm-overall-height-13mm-2-carriages-sku-64970571/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 12mm length 300mm overall height 13mm 1 carriage SKU: 64970570](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-12mm-length-300mm-overall-height-13mm-1-carriage-sku-64970570/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Carriage for Miniature profile rail guide HQ stainless rail width 9mm SKU: 64970569](https://maedler.in/product/carriage-for-miniature-profile-rail-guide-hq-stainless-rail-width-9mm-sku-64970569/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 9mm length 500mm overall height 10mm 2 carriages SKU: 64970564](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-9mm-length-500mm-overall-height-10mm-2-carriages-sku-64970564/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 9mm length 500mm overall height 10mm 1 carriage SKU: 64970563](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-9mm-length-500mm-overall-height-10mm-1-carriage-sku-64970563/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 9mm length 300mm overall height 10mm 2 carriages SKU: 64970562](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-9mm-length-300mm-overall-height-10mm-2-carriages-sku-64970562/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 9mm length 300mm overall height 10mm 1 carriage SKU: 64970561](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-9mm-length-300mm-overall-height-10mm-1-carriage-sku-64970561/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 9mm length 100mm overall height 10mm 1 carriage SKU: 64970560](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-9mm-length-100mm-overall-height-10mm-1-carriage-sku-64970560/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Carriage for Miniature profile rail guide HQ stainless rail width 7mm SKU: 64970559](https://maedler.in/product/carriage-for-miniature-profile-rail-guide-hq-stainless-rail-width-7mm-sku-64970559/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 7mm length 500mm overall height 8mm 2 carriages SKU: 64970554](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-7mm-length-500mm-overall-height-8mm-2-carriages-sku-64970554/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 7mm length 500mm overall height 8mm 1 carriage SKU: 64970553](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-7mm-length-500mm-overall-height-8mm-1-carriage-sku-64970553/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 7mm length 300mm overall height 8mm 2 carriages SKU: 64970552](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-7mm-length-300mm-overall-height-8mm-2-carriages-sku-64970552/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 7mm length 300mm overall height 8mm 1 carriage SKU: 64970551](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-7mm-length-300mm-overall-height-8mm-1-carriage-sku-64970551/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Miniature profile rail guide HQ stainless rail width 7mm length 100mm overall height 8mm 1 carriage SKU: 64970550](https://maedler.in/product/miniature-profile-rail-guide-hq-stainless-rail-width-7mm-length-100mm-overall-height-8mm-1-carriage-sku-64970550/): Material: Rails: Stainless steel 1.4037. Guide Carriage: Stainless steel 1.4037 with return zones of POM. Balls: Stainless steel 1.4037. Seals: Polyurethane. Lubrication: Oil with FDA registration.Technical Data:Structure: 4-point contact ball recirculation system with identical load angles and 2 ball recirculation paths per carriage for unlim ited stroke.Product range: four different rail widths: 7, 9, 12, 15 mm with one or two carriages.Speed: Up to max. 5 m/s. Acceleration: Up to 140 m/s2.Accuracy class: H (standard, for most applications).Preload class: Z0 (standard, slight clearance). Other accuracy classes and preload classes on request.Temperature range: -20ºC to +80ºC.Rust-resistant: All components of the system are made from rust-resitant steel or of plastic and are therefore not prone to corrosion. Easy maintenance: The system can be easily relubricated through lubrications holes located in the end pieces of the carriage. - [Track for linear guide DA 0115 RC aluminium length 2400mm with mounting holes hole center distance 100mm SKU: 64970524H](https://maedler.in/product/track-for-linear-guide-da-0115-rc-aluminium-length-2400mm-with-mounting-holes-hole-center-distance-100mm-sku-64970524h/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Track for linear guide DA 0115 RC aluminium length 2400mm SKU: 64970524](https://maedler.in/product/track-for-linear-guide-da-0115-rc-aluminium-length-2400mm-sku-64970524/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Track for linear guide DA 0115 RC aluminium length 1800mm with mounting holes hole center distance 100mm SKU: 64970518H](https://maedler.in/product/track-for-linear-guide-da-0115-rc-aluminium-length-1800mm-with-mounting-holes-hole-center-distance-100mm-sku-64970518h/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Track for linear guide DA 0115 RC aluminium length 1800mm SKU: 64970518](https://maedler.in/product/track-for-linear-guide-da-0115-rc-aluminium-length-1800mm-sku-64970518/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Track for linear guide DA 0115 RC aluminium length 1200mm with mounting holes hole center distance 100mm SKU: 64970512H](https://maedler.in/product/track-for-linear-guide-da-0115-rc-aluminium-length-1200mm-with-mounting-holes-hole-center-distance-100mm-sku-64970512h/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Track for linear guide DA 0115 RC aluminium length 1200mm SKU: 64970512](https://maedler.in/product/track-for-linear-guide-da-0115-rc-aluminium-length-1200mm-sku-64970512/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Track for linear guide DA 0115 RC aluminium length 600mm with mounting holes hole center distance 100mm SKU: 64970506H](https://maedler.in/product/track-for-linear-guide-da-0115-rc-aluminium-length-600mm-with-mounting-holes-hole-center-distance-100mm-sku-64970506h/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Track for linear guide DA 0115 RC aluminium length 600mm SKU: 64970506](https://maedler.in/product/track-for-linear-guide-da-0115-rc-aluminium-length-600mm-sku-64970506/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [End stop for linear guide DA 0115 RC 1 piece with 2 screws SKU: 64970503](https://maedler.in/product/end-stop-for-linear-guide-da-0115-rc-1-piece-with-2-screws-sku-64970503/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Carriage with polymer balls for linear guide DA 0115 RC SKU: 64970502](https://maedler.in/product/carriage-with-polymer-balls-for-linear-guide-da-0115-rc-sku-64970502/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Carriage with stainless steel balls for linear guide DA 0115 RC SKU: 64970501](https://maedler.in/product/carriage-with-stainless-steel-balls-for-linear-guide-da-0115-rc-sku-64970501/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use.Video clip (2 minutes) for illustrating Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 80,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 705 01 = Carriage with stainless steel balls.649 705 02 = Carriage with polymer balls.649 705 03 = End Stop (1 piece with screws).649 705 06 = Track, length approx. 600mm.   649 705 06H = Track, length approx. 600mm, with mounting holes. 649 705 12 = Track, length approx. 1200mm.  649 705 12H = Track, length approx. 1200mm, with mounting holes. 649 705 18 = Track, length approx. 1800mm.  649 705 18H = Track, length approx. 1800mm, with mounting holes. 649 705 24 = Track, length approx. 2400mm.  649 705 24H = Track, length approx. 2400mm, with mounting holes. Please see catalog page (PDF). - [Slide set DS 0330 slide length 700mm stainless steel SKU: 64944670](https://maedler.in/product/slide-set-ds-0330-slide-length-700mm-stainless-steel-sku-64944670/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DS 0330 slide length 600mm stainless steel SKU: 64944660](https://maedler.in/product/slide-set-ds-0330-slide-length-600mm-stainless-steel-sku-64944660/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DS 0330 slide length 550mm stainless steel SKU: 64944655](https://maedler.in/product/slide-set-ds-0330-slide-length-550mm-stainless-steel-sku-64944655/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DS 0330 slide length 500mm stainless steel SKU: 64944650](https://maedler.in/product/slide-set-ds-0330-slide-length-500mm-stainless-steel-sku-64944650/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DS 0330 slide length 450mm stainless steel SKU: 64944645](https://maedler.in/product/slide-set-ds-0330-slide-length-450mm-stainless-steel-sku-64944645/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DS 0330 slide length 400mm stainless steel SKU: 64944640](https://maedler.in/product/slide-set-ds-0330-slide-length-400mm-stainless-steel-sku-64944640/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DS 0330 slide length 350mm stainless steel SKU: 64944635](https://maedler.in/product/slide-set-ds-0330-slide-length-350mm-stainless-steel-sku-64944635/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DS 0330 slide length 300mm stainless steel SKU: 64944630](https://maedler.in/product/slide-set-ds-0330-slide-length-300mm-stainless-steel-sku-64944630/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Can be mounted on both sides. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load rating. - [Slide set DS 2028 slide length 700mm stainless steel SKU: 64944470](https://maedler.in/product/slide-set-ds-2028-slide-length-700mm-stainless-steel-sku-64944470/): Material: Slide elements: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Ideal for environments where mild steel might corrode. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 444 30, Slides DS 2028 - [Slide set DS 2028 slide length 650mm stainless steel SKU: 64944465](https://maedler.in/product/slide-set-ds-2028-slide-length-650mm-stainless-steel-sku-64944465/): Material: Slide elements: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Ideal for environments where mild steel might corrode. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 444 30, Slides DS 2028 - [Slide set DS 2028 slide length 600mm stainless steel SKU: 64944460](https://maedler.in/product/slide-set-ds-2028-slide-length-600mm-stainless-steel-sku-64944460/): Material: Slide elements: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Ideal for environments where mild steel might corrode. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 444 30, Slides DS 2028 - [Slide set DS 2028 slide length 550mm stainless steel SKU: 64944455](https://maedler.in/product/slide-set-ds-2028-slide-length-550mm-stainless-steel-sku-64944455/): Material: Slide elements: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Ideal for environments where mild steel might corrode. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 444 30, Slides DS 2028 - [Slide set DS 2028 slide length 500mm stainless steel SKU: 64944450](https://maedler.in/product/slide-set-ds-2028-slide-length-500mm-stainless-steel-sku-64944450/): Material: Slide elements: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Ideal for environments where mild steel might corrode. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 444 30, Slides DS 2028 - [Slide set DS 2028 slide length 450mm stainless steel SKU: 64944445](https://maedler.in/product/slide-set-ds-2028-slide-length-450mm-stainless-steel-sku-64944445/): Material: Slide elements: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Ideal for environments where mild steel might corrode. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 444 30, Slides DS 2028 - [Slide set DS 2028 slide length 400mm stainless steel SKU: 64944440](https://maedler.in/product/slide-set-ds-2028-slide-length-400mm-stainless-steel-sku-64944440/): Material: Slide elements: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Ideal for environments where mild steel might corrode. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 444 30, Slides DS 2028 - [Slide set DS 2028 slide length 350mm stainless steel SKU: 64944435](https://maedler.in/product/slide-set-ds-2028-slide-length-350mm-stainless-steel-sku-64944435/): Material: Slide elements: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Ideal for environments where mild steel might corrode. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 444 30, Slides DS 2028 - [Slide set DS 2028 slide length 300mm stainless steel SKU: 64944430](https://maedler.in/product/slide-set-ds-2028-slide-length-300mm-stainless-steel-sku-64944430/): Material: Slide elements: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Ideal for environments where mild steel might corrode. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Ordering details: e.g.: Product no. 649 444 30, Slides DS 2028 - [Slide set DS 5321 slide length 790mm stainless steel SKU: 64944080](https://maedler.in/product/slide-set-ds-5321-slide-length-790mm-stainless-steel-sku-64944080/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk screw. Use all mounting positions to achieve the max. load ratings. Attention: Vertical mounting only Ordering details: e.g.: Product no. 649 440 30, Slides DS 5321 - [Slide set DS 5321 slide length 700mm stainless steel SKU: 64944070](https://maedler.in/product/slide-set-ds-5321-slide-length-700mm-stainless-steel-sku-64944070/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk screw. Use all mounting positions to achieve the max. load ratings. Attention: Vertical mounting only Ordering details: e.g.: Product no. 649 440 30, Slides DS 5321 - [Slide set DS 5321 slide length 600mm stainless steel SKU: 64944060](https://maedler.in/product/slide-set-ds-5321-slide-length-600mm-stainless-steel-sku-64944060/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk screw. Use all mounting positions to achieve the max. load ratings. Attention: Vertical mounting only Ordering details: e.g.: Product no. 649 440 30, Slides DS 5321 - [Slide set DS 5321 slide length 550mm stainless steel SKU: 64944055](https://maedler.in/product/slide-set-ds-5321-slide-length-550mm-stainless-steel-sku-64944055/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk screw. Use all mounting positions to achieve the max. load ratings. Attention: Vertical mounting only Ordering details: e.g.: Product no. 649 440 30, Slides DS 5321 - [Slide set DS 5321 slide length 500mm stainless steel SKU: 64944050](https://maedler.in/product/slide-set-ds-5321-slide-length-500mm-stainless-steel-sku-64944050/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk screw. Use all mounting positions to achieve the max. load ratings. Attention: Vertical mounting only Ordering details: e.g.: Product no. 649 440 30, Slides DS 5321 - [Slide set DS 5321 slide length 450mm stainless steel SKU: 64944045](https://maedler.in/product/slide-set-ds-5321-slide-length-450mm-stainless-steel-sku-64944045/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk screw. Use all mounting positions to achieve the max. load ratings. Attention: Vertical mounting only Ordering details: e.g.: Product no. 649 440 30, Slides DS 5321 - [Slide set DS 5321 slide length 400mm stainless steel SKU: 64944040](https://maedler.in/product/slide-set-ds-5321-slide-length-400mm-stainless-steel-sku-64944040/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk screw. Use all mounting positions to achieve the max. load ratings. Attention: Vertical mounting only Ordering details: e.g.: Product no. 649 440 30, Slides DS 5321 - [Slide set DS 5321 slide length 350mm stainless steel SKU: 64944035](https://maedler.in/product/slide-set-ds-5321-slide-length-350mm-stainless-steel-sku-64944035/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk screw. Use all mounting positions to achieve the max. load ratings. Attention: Vertical mounting only Ordering details: e.g.: Product no. 649 440 30, Slides DS 5321 - [Slide set DS 5321 slide length 300mm stainless steel SKU: 64944030](https://maedler.in/product/slide-set-ds-5321-slide-length-300mm-stainless-steel-sku-64944030/): Material: Stainless steel 1.4301 (AISI 304).Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Hold-in in closed position. Mounting bracket for electrical cabinets on request. Service life 10,000 / 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M5 countersunk / 6mm countersunk screw. Use all mounting positions to achieve the max. load ratings. Attention: Vertical mounting only Ordering details: e.g.: Product no. 649 440 30, Slides DS 5321 - [Slide set DH 3832 slide length 700mm corrosion resistant SKU: 64931270](https://maedler.in/product/slide-set-dh-3832-slide-length-700mm-corrosion-resistant-sku-64931270/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 650mm corrosion resistant SKU: 64931265](https://maedler.in/product/slide-set-dh-3832-slide-length-650mm-corrosion-resistant-sku-64931265/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 600mm corrosion resistant SKU: 64931260](https://maedler.in/product/slide-set-dh-3832-slide-length-600mm-corrosion-resistant-sku-64931260/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 550mm corrosion resistant SKU: 64931255](https://maedler.in/product/slide-set-dh-3832-slide-length-550mm-corrosion-resistant-sku-64931255/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 500mm corrosion resistant SKU: 64931250](https://maedler.in/product/slide-set-dh-3832-slide-length-500mm-corrosion-resistant-sku-64931250/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 450mm corrosion resisitant SKU: 64931245](https://maedler.in/product/slide-set-dh-3832-slide-length-450mm-corrosion-resisitant-sku-64931245/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 400mm corrosion resistant SKU: 64931240](https://maedler.in/product/slide-set-dh-3832-slide-length-400mm-corrosion-resistant-sku-64931240/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 350mm corrosion resistant SKU: 64931235](https://maedler.in/product/slide-set-dh-3832-slide-length-350mm-corrosion-resistant-sku-64931235/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 300mm corrosion resistant SKU: 64931230](https://maedler.in/product/slide-set-dh-3832-slide-length-300mm-corrosion-resistant-sku-64931230/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 250mm corrosion resistant SKU: 64931225](https://maedler.in/product/slide-set-dh-3832-slide-length-250mm-corrosion-resistant-sku-64931225/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 199mm corrosion resistant SKU: 64931220](https://maedler.in/product/slide-set-dh-3832-slide-length-199mm-corrosion-resistant-sku-64931220/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DH 3832 slide length 148mm corrosion resistant SKU: 64931215](https://maedler.in/product/slide-set-dh-3832-slide-length-148mm-corrosion-resistant-sku-64931215/): Material: Slide elements: Cold rolled steel, special zinc-plating. Ball retainers: Plastic / stainless steel. Balls: Stainless steel. Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Corrosion proof for rough environments. 8 times better than with standard zinc-plated surface finish. Ball retainers, balls and rivets made from stainless steel. Fast disconnection. Hold-in in the closed position. Cam drawer adjust (3.1 mm). Service life 80,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. Horizontal mounting is not recommended. Ordering details: e.g.: Product no. 649 312 15, Slides DH 3832 - [Slide set DS 0305 slide length 711mm stainless steel 1.4301 SKU: 64922428](https://maedler.in/product/slide-set-ds-0305-slide-length-711mm-stainless-steel-1-4301-sku-64922428/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 0305 slide length 660mm stainless steel 1.4301 SKU: 64922426](https://maedler.in/product/slide-set-ds-0305-slide-length-660mm-stainless-steel-1-4301-sku-64922426/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 0305 slide length 610mm stainless steel 1.4301 SKU: 64922424](https://maedler.in/product/slide-set-ds-0305-slide-length-610mm-stainless-steel-1-4301-sku-64922424/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 0305 slide length 559mm stainless steel 1.4301 SKU: 64922422](https://maedler.in/product/slide-set-ds-0305-slide-length-559mm-stainless-steel-1-4301-sku-64922422/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 0305 slide length 508mm stainless steel 1.4301 SKU: 64922420](https://maedler.in/product/slide-set-ds-0305-slide-length-508mm-stainless-steel-1-4301-sku-64922420/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 0305 slide length 457mm stainless steel 1.4301 SKU: 64922418](https://maedler.in/product/slide-set-ds-0305-slide-length-457mm-stainless-steel-1-4301-sku-64922418/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 0305 slide length 406mm stainless steel 1.4301 SKU: 64922416](https://maedler.in/product/slide-set-ds-0305-slide-length-406mm-stainless-steel-1-4301-sku-64922416/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Slide set DS 0305 slide length 356mm stainless steel 1.4301 SKU: 64922414](https://maedler.in/product/slide-set-ds-0305-slide-length-356mm-stainless-steel-1-4301-sku-64922414/): Material: Stainless steel 1.4301 (AISI 304). Sold by pair (1 x product no. = 1 pair of slides). Telescopic ball bearing precision slides for applications in the industrial and electronics sector. Locks in open position. Fast disconnection. Service life 10,000 cycles. Temperature range: -20°C to +70°C. Note Recommended fastening: M4 screw. Use all mounting positions to achieve the max. load ratings. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 50.0mm black polyacetal SKU: 60125000](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-50-0mm-black-polyacetal-sku-60125000/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 41.3mm black polyacetal SKU: 60124800](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-41-3mm-black-polyacetal-sku-60124800/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for aluminium couplings HF, HFD, HZ, HZD outside diameter 33.3mm lenght 17mm black polyacetal SKU: 60124600](https://maedler.in/product/sliding-disc-spare-part-for-aluminium-couplings-hf-hfd-hz-hzd-outside-diameter-33-3mm-lenght-17mm-black-polyacetal-sku-60124600/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HFD stainless and HZD stainless outside diameter 33.3mm lenght 11mm black polyacetal SKU: 60124500](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hfd-stainless-and-hzd-stainless-outside-diameter-33-3mm-lenght-11mm-black-polyacetal-sku-60124500/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 25.4mm black polyacetal SKU: 60124400](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-25-4mm-black-polyacetal-sku-60124400/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 19.1mm black polyacetal SKU: 60124200](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-19-1mm-black-polyacetal-sku-60124200/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 12.7mm black polyacetal SKU: 60123900](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-12-7mm-black-polyacetal-sku-60123900/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 9.5mm black polyacetal SKU: 60123800](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-9-5mm-black-polyacetal-sku-60123800/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 6.4mm black polyacetal SKU: 60123700](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-6-4mm-black-polyacetal-sku-60123700/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Torsionally-stiff coupling HZ with blind hole bore 6mm max. torque 0.5 Nm outside diameter 12.7mm SKU: 60120800](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-6mm-max-torque-0-5-nm-outside-diameter-12-7mm-sku-60120800/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 4mm max. torque 0.5 Nm outside diameter 12.7mm SKU: 60120700](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-4mm-max-torque-0-5-nm-outside-diameter-12-7mm-sku-60120700/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 3mm max. torque 0.5 Nm outside diameter 12.7mm SKU: 60120600](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-3mm-max-torque-0-5-nm-outside-diameter-12-7mm-sku-60120600/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 4mm max. torque 0.21 Nm outside diameter 9.5mm SKU: 60120400](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-4mm-max-torque-0-21-nm-outside-diameter-9-5mm-sku-60120400/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 3mm max. torque 0.21 Nm outside diameter 9.5mm SKU: 60120300](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-3mm-max-torque-0-21-nm-outside-diameter-9-5mm-sku-60120300/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 3mm max. torque 0.06 Nm outside diameter 6.4mm SKU: 60120200](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-3mm-max-torque-0-06-nm-outside-diameter-6-4mm-sku-60120200/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 2mm max. torque 0.06 Nm outside diameter 6.4mm SKU: 60120100](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-2mm-max-torque-0-06-nm-outside-diameter-6-4mm-sku-60120100/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HB bore 16mm max. torque 3.5 Nm outside diameter 41.4mm +++ set-screw-style +++ SKU: 60111700](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-16mm-max-torque-3-5-nm-outside-diameter-41-4mm-set-screw-style-sku-60111700/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 12mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60111600](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-12mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60111600/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 10mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60111500](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-10mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60111500/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 8mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60111400](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-8mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60111400/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 8mm max. torque 1.7 Nm outside diameter 28mm SKU: 60111000](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-8mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60111000/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 6mm max. torque 1.7 Nm outside diameter 28mm SKU: 60110900](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-6mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60110900/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 4mm max. torque 1.7 Nm outside diameter 28mm SKU: 60110800](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-4mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60110800/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 6mm max. torque 0.3 Nm outside diameter 19.1mm SKU: 60110600](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-6mm-max-torque-0-3-nm-outside-diameter-19-1mm-sku-60110600/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 4mm max. torque 0.3 Nm outside diameter 19.1mm SKU: 60110400](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-4mm-max-torque-0-3-nm-outside-diameter-19-1mm-sku-60110400/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [Torsionally-stiff coupling HB bore 3mm max. torque 0.3 Nm outside diameter 19.1mm SKU: 60110300](https://maedler.in/product/torsionally-stiff-coupling-hb-bore-3mm-max-torque-0-3-nm-outside-diameter-19-1mm-sku-60110300/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish. Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties Applications: puls-triggered drive units (e.g. stepper motors, transducers, engine speed sensors, potentiometers). Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. The sizes D1 = 19 and D1 = 28 only 5 degrees. 2) Operating factors for couplings HU and HB (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 1,5 3 hours per day - 2 6 hours per day - 3 12 hours per day - 4 - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm shielded on both sides SKU: 6010-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-shielded-on-both-sides-sku-6010-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm shielded on both sides clearance C3 SKU: 6010-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-shielded-on-both-sides-clearance-c3-sku-6010-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm sealed on both sides SKU: 6010-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-sealed-on-both-sides-sku-6010-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm sealed on both sides clearance C3 SKU: 6010-2RS1-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-sealed-on-both-sides-clearance-c3-sku-6010-2rs1-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm sealed on both sides SKU: 6010-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-sealed-on-both-sides-sku-6010-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Torsionally-stiff coupling HU bore 12mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60101800](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-12mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60101800/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 10mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60101500](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-10mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60101500/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 8mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60101400](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-8mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60101400/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 6mm max. torque 3.5 Nm outside diameter 41.4mm SKU: 60101300](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-6mm-max-torque-3-5-nm-outside-diameter-41-4mm-sku-60101300/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 8mm max. torque 1.7 Nm outside diameter 28mm SKU: 60101000](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-8mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60101000/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 6mm max. torque 1.7 Nm outside diameter 28mm SKU: 60100900](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-6mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60100900/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 4mm max. torque 1.7 Nm outside diameter 28mm SKU: 60100800](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-4mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60100800/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 3mm max. torque 1.7 Nm outside diameter 28mm SKU: 60100700](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-3mm-max-torque-1-7-nm-outside-diameter-28mm-sku-60100700/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 4mm max. torque 0.3 Nm outside diameter 18mm SKU: 60100400](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-4mm-max-torque-0-3-nm-outside-diameter-18mm-sku-60100400/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 3mm max. torque 0.3 Nm outside diameter 18mm SKU: 60100300](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-3mm-max-torque-0-3-nm-outside-diameter-18mm-sku-60100300/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [Torsionally-stiff coupling HU bore 2mm max. torque 0.3 Nm outside diameter 18mm SKU: 60100200](https://maedler.in/product/torsionally-stiff-coupling-hu-bore-2mm-max-torque-0-3-nm-outside-diameter-18mm-sku-60100200/): Material: Up to D1 = 28 mm hubs made of brass, chromated and passivated. From D1 = 41,4 mm aluminium alloy with iridite NCP finish.Torque ring made of black polyacetal. These unique, zero backlash, general purpose couplings provide electrical insulation. They are designed for the lower torque range and offer generous angular and radial misalignment compensation. Their axial stiffness is unique and they can anchor unrestricted shafts or perform light push/pull duties. Applications: Ideal for stepper motors due to the damping properties of plastic torque rings. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) At lower speeds the couplings can compensate up to +/-1 mm radial and 10º angular displacement. 2) Operating factors: see coupling HB. - [MAEDLER deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm shielded on both sides SKU: 6010-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-shielded-on-both-sides-sku-6010-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm open (unsealed) SKU: 6010-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-open-unsealed-sku-6010-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 50mm outer diameter 80mm width 16mm open (unsealed) clearance C3 SKU: 6010-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-50mm-outer-diameter-80mm-width-16mm-open-unsealed-clearance-c3-sku-6010-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Two-piece clamp coupling MAT both sides bore 50mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099950](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-50mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099950/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 40mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099940](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-40mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099940/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 35mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099935](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-35mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099935/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 30mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099930](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-30mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099930/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 25mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099925](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-25mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099925/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 20mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099920](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-20mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099920/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 19mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099919](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-19mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099919/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 16mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099916](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-16mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099916/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 15mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099915](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-15mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099915/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 14mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099914](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-14mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099914/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 12mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099912](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-12mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099912/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 10mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099910](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-10mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099910/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 8mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099908](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-8mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099908/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 6mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099906](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-6mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099906/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 50mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099850](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-50mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099850/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 40mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099840](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-40mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099840/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 35mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099835](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-35mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099835/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 30mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099830](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-30mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099830/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 25mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099825](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-25mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099825/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 20mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099820](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-20mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099820/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 19mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099819](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-19mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099819/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 16mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099816](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-16mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099816/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 15mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099815](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-15mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099815/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 14mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099814](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-14mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099814/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 12mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099812](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-12mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099812/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 10mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099810](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-10mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099810/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 8mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099808](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-8mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099808/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 6mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099806](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-6mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099806/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 5mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099805](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-5mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099805/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 4mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099804](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-4mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099804/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Two-piece clamp coupling MAT both sides bore 3mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099803](https://maedler.in/product/two-piece-clamp-coupling-mat-both-sides-bore-3mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099803/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 50mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099750](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-50mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099750/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 40mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099740](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-40mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099740/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 35mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099735](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-35mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099735/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 30mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099730](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-30mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099730/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 25mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099725](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-25mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099725/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 20mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099720](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-20mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099720/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 19mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099719](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-19mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099719/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 16mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099716](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-16mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099716/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 15mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099715](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-15mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099715/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 14mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099714](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-14mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099714/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 12mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099712](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-12mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099712/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 10mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099710](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-10mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099710/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 8mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099708](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-8mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099708/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 6mm with keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099706](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-6mm-with-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099706/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. Feather Key Groove DIN 6885/1, Tolerance P9. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 50mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099650](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-50mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099650/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 40mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099640](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-40mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099640/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 35mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099635](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-35mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099635/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 30mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099630](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-30mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099630/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 25mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099625](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-25mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099625/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 20mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099620](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-20mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099620/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 19mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099619](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-19mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099619/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 16mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099616](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-16mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099616/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 15mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099615](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-15mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099615/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [One-piece clamp coupling MAS both sides bore 14mm without keyway stainless steel 1.4305 with bolts DIN 912 A2-70 SKU: 60099614](https://maedler.in/product/one-piece-clamp-coupling-mas-both-sides-bore-14mm-without-keyway-stainless-steel-1-4305-with-bolts-din-912-a2-70-sku-60099614/): Material: Stainless steel 1.4305 (AISI 303). Temperature range from -40°C to +175°C. Maximum speed 4000 rpm. The screws DIN 912 - A2-70 used in all couplings are covered with a layer of polyamide. Thus the bolts do not loosen with vibrations Bore tolerance: +0,051 mm. The torques in the table are maximum values which can only be achieved with perfect mounting and dimensional accuracy of the shaft. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981742](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981742/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981740](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981740/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981738](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981738/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981670](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981670/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981665](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981665/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981660](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981660/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981650](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981650/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981648](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981648/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981645](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981645/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981642](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981642/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981640](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981640/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 16 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981638](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-16-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981638/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981560](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981560/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981550](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981550/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981548](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981548/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981545](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981545/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981542](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981542/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981540](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981540/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981538](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981538/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981535](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981535/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 15 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981532](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981532/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981460](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981460/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981450](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981450/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981448](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981448/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981445](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981445/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981442](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981442/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981440](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981440/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981438](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981438/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981435](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981435/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 14 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981432](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-14-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981432/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981360](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981360/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981350](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981350/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981348](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981348/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981345](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981345/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981342](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981342/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981340](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981340/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981338](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981338/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981335](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981335/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981332](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981332/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981330](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981330/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981328](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981328/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981325](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981325/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981260](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981260/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981250](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981250/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981248](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981248/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981245](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981245/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981242](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981242/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981240](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981240/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981238](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981238/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981235](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981235/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981232](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981232/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981230](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981230/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981228](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981228/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981225](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981225/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981160](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981160/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981150](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981150/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981145](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981145/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981142](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981142/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981140](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981140/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981138](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981138/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981135](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981135/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981132](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981132/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981130](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981130/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 28H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981128](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-28h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981128/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981125](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981125/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981038](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981035](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981035/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981032](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981032/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981030](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981030/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981025](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-10-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981025/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980938](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980935](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980935/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 32H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980932](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-32h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980932/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980930](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980930/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 9 teeth material steeel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10980925](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-9-teeth-material-steeel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10980925/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 30 teeth material steel teeth hardened for taper bush type 3020 SKU: 10978130](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-30-teeth-material-steel-teeth-hardened-for-taper-bush-type-3020-sku-10978130/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 27 teeth material steel teeth hardened for taper bush type 3020 SKU: 10978127](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-27-teeth-material-steel-teeth-hardened-for-taper-bush-type-3020-sku-10978127/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 25 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978125](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-25-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978125/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 23 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978123](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-23-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978123/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 21 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978121](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-21-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978121/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 19 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978119](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-19-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978119/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 17 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978117](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-17-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978117/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 15 teeth material steel teeth hardened for taper bush type 2517 SKU: 10978115](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-15-teeth-material-steel-teeth-hardened-for-taper-bush-type-2517-sku-10978115/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRTG 20 B-1 1 1/4"x3/4" 13 teeth material steel teeth hardened for taper bush type 2012 SKU: 10978113](https://maedler.in/product/sprocket-krtg-20-b-1-1-1-4x3-4-13-teeth-material-steel-teeth-hardened-for-taper-bush-type-2012-sku-10978113/): Material: Steel C45, Teeth milled and induction hardened (approx. HRC 50).Hardened sprockets for taper bushes, for easy and fast mounting. They can be used with and without key. The taper bush has to be ordered separately. These bushes are available with various outer dimensions and many different bores.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 76 teeth material cast iron for taper bush typ 3020 SKU: 10977176G](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-76-teeth-material-cast-iron-for-taper-bush-typ-3020-sku-10977176g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 76 teeth material steel for taper bush typ 3020 SKU: 10977176](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-76-teeth-material-steel-for-taper-bush-typ-3020-sku-10977176/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 57 teeth material cast iron for taper bush typ 3020 SKU: 10977157G](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-57-teeth-material-cast-iron-for-taper-bush-typ-3020-sku-10977157g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 57 teeth material steel for taper bush typ 3020 SKU: 10977157](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-57-teeth-material-steel-for-taper-bush-typ-3020-sku-10977157/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 45 teeth material steel for taper bush typ 3020 SKU: 10977145](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-45-teeth-material-steel-for-taper-bush-typ-3020-sku-10977145/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 38 teeth material cast iron for taper bush typ 3020 SKU: 10977138G](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-38-teeth-material-cast-iron-for-taper-bush-typ-3020-sku-10977138g/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 38 teeth material steel for taper bush typ 3020 SKU: 10977138](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-38-teeth-material-steel-for-taper-bush-typ-3020-sku-10977138/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 36 teeth material steel for taper bush typ 3020 SKU: 10977136](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-36-teeth-material-steel-for-taper-bush-typ-3020-sku-10977136/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 30 teeth material steel for taper bush typ 3020 SKU: 10977130](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-30-teeth-material-steel-for-taper-bush-typ-3020-sku-10977130/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 27 teeth material steel for taper bush typ 3020 SKU: 10977127](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-27-teeth-material-steel-for-taper-bush-typ-3020-sku-10977127/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 25 teeth material steel for taper bush typ 2517 SKU: 10977125](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-25-teeth-material-steel-for-taper-bush-typ-2517-sku-10977125/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 24 teeth material steel for taper bush typ 2517 SKU: 10977124](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-24-teeth-material-steel-for-taper-bush-typ-2517-sku-10977124/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 23 teeth material steel for taper bush typ 2517 SKU: 10977123](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-23-teeth-material-steel-for-taper-bush-typ-2517-sku-10977123/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 22 teeth material steel for taper bush typ 2517 SKU: 10977122](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-22-teeth-material-steel-for-taper-bush-typ-2517-sku-10977122/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 21 teeth material steel for taper bush typ 2517 SKU: 10977121](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-21-teeth-material-steel-for-taper-bush-typ-2517-sku-10977121/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 20 B-1 1 1/4" x 3/4" 20 teeth material steel for taper bush typ 2517 SKU: 10977120](https://maedler.in/product/sprocket-krt-20-b-1-1-1-4-x-3-4-20-teeth-material-steel-for-taper-bush-typ-2517-sku-10977120/): Material: Steel C45, not hardened. Product numbers ending with G are made from grey cast iron GG25, with the teeth are centered on the wheel disc. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 36 stainless steel A2 SKU: 65314036A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-36-stainless-steel-a2-sku-65314036a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 36 zinc plated SKU: 65314036](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-36-zinc-plated-sku-65314036/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 32 stainless steel A2 SKU: 65314032A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-32-stainless-steel-a2-sku-65314032a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 32 zinc plated SKU: 65314032](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-32-zinc-plated-sku-65314032/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 25 stainless steel A2 SKU: 65314025A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-25-stainless-steel-a2-sku-65314025a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 25 zinc plated SKU: 65314025](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-25-zinc-plated-sku-65314025/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 20 stainless steel A2 SKU: 65314020A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-20-stainless-steel-a2-sku-65314020a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 20 zinc plated SKU: 65314020](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-20-zinc-plated-sku-65314020/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 63 stainless steel A2 SKU: 65313263A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-63-stainless-steel-a2-sku-65313263a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 63 zinc plated SKU: 65313263](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-63-zinc-plated-sku-65313263/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 50 stainless steel A2 SKU: 65313250A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-50-stainless-steel-a2-sku-65313250a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 50 zinc plated SKU: 65313250](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-50-zinc-plated-sku-65313250/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 40 stainless steel A2 SKU: 65313240A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-40-stainless-steel-a2-sku-65313240a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 40 zinc plated SKU: 65313240](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-40-zinc-plated-sku-65313240/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 36 stainless steel A2 SKU: 65313236A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-36-stainless-steel-a2-sku-65313236a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 36 zinc plated SKU: 65313236](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-36-zinc-plated-sku-65313236/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 32 stainless steel A2 SKU: 65313232A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-32-stainless-steel-a2-sku-65313232a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 32 zinc plated SKU: 65313232](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-32-zinc-plated-sku-65313232/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 25 stainless steel A2 SKU: 65313225A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-25-stainless-steel-a2-sku-65313225a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 25 zinc plated SKU: 65313225](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-25-zinc-plated-sku-65313225/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 20 stainless steel A2 SKU: 65313220A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-20-stainless-steel-a2-sku-65313220a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 3,2 x 20 zinc plated SKU: 65313220](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-32-x-20-zinc-plated-sku-65313220/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Washer DIN 6340 for bolt size M30 steel hardened bore 31mm outer diameter 68mm width 10mm SKU: 65313000](https://maedler.in/product/washer-din-6340-for-bolt-size-m30-steel-hardened-bore-31mm-outer-diameter-68mm-width-10mm-sku-65313000/): Material: Quenched and tempered steel, stamped out, pressed flat or machine straightened, hardened. * Diameter d1 = 15mm is not part of the DIN. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 50 stainless steel A2 SKU: 65312550A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-50-stainless-steel-a2-sku-65312550a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 50 zinc plated SKU: 65312550](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-50-zinc-plated-sku-65312550/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 40 stainless steel A2 SKU: 65312540A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-40-stainless-steel-a2-sku-65312540a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 40 zinc plated SKU: 65312540](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-40-zinc-plated-sku-65312540/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 36 stainless steel A2 SKU: 65312536A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-36-stainless-steel-a2-sku-65312536a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 36 zinc plated SKU: 65312536](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-36-zinc-plated-sku-65312536/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 32 stainless steel A2 SKU: 65312532A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-32-stainless-steel-a2-sku-65312532a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 32 zinc plated SKU: 65312532](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-32-zinc-plated-sku-65312532/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 25 stainless steel A2 SKU: 65312525A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-25-stainless-steel-a2-sku-65312525a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 25 zinc plated SKU: 65312525](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-25-zinc-plated-sku-65312525/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 20 stainless steel A2 SKU: 65312520A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-20-stainless-steel-a2-sku-65312520a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2.5 x 20 zinc plated SKU: 65312520](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-5-x-20-zinc-plated-sku-65312520/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Washer DIN 6340 for bolt size M24 steel hardened bore 25mm outer diameter 60mm width 8mm SKU: 65312400](https://maedler.in/product/washer-din-6340-for-bolt-size-m24-steel-hardened-bore-25mm-outer-diameter-60mm-width-8mm-sku-65312400/): Material: Quenched and tempered steel, stamped out, pressed flat or machine straightened, hardened. * Diameter d1 = 15mm is not part of the DIN. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 50 stainless steel A2 SKU: 65312050A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-50-stainless-steel-a2-sku-65312050a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 50 zinc plated SKU: 65312050](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-50-zinc-plated-sku-65312050/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 40 stainless steel A2 SKU: 65312040A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-40-stainless-steel-a2-sku-65312040a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 40 zinc plated SKU: 65312040](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-40-zinc-plated-sku-65312040/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 36 stainless steel A2 SKU: 65312036A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-36-stainless-steel-a2-sku-65312036a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 36 zinc plated SKU: 65312036](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-36-zinc-plated-sku-65312036/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 32 stainless steel A2 SKU: 65312032A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-32-stainless-steel-a2-sku-65312032a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 32 zinc plated SKU: 65312032](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-32-zinc-plated-sku-65312032/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 25 stainless steel A2 SKU: 65312025A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-25-stainless-steel-a2-sku-65312025a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 25 zinc plated SKU: 65312025](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-25-zinc-plated-sku-65312025/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 20 stainless steel A2 SKU: 65312020A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-20-stainless-steel-a2-sku-65312020a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 20 zinc plated SKU: 65312020](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-20-zinc-plated-sku-65312020/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 16 stainless steel A2 SKU: 65312016A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-16-stainless-steel-a2-sku-65312016a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 16 zinc plated SKU: 65312016](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-16-zinc-plated-sku-65312016/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 10 stainless steel A2 SKU: 65312010A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-10-stainless-steel-a2-sku-65312010a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 2 x 10 zinc plated SKU: 65312010](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-2-x-10-zinc-plated-sku-65312010/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Washer DIN 6340 for bolt size M20 steel hardened bore 21mm outer diameter 50mm width 6mm SKU: 65312000](https://maedler.in/product/washer-din-6340-for-bolt-size-m20-steel-hardened-bore-21mm-outer-diameter-50mm-width-6mm-sku-65312000/): Material: Quenched and tempered steel, stamped out, pressed flat or machine straightened, hardened. * Diameter d1 = 15mm is not part of the DIN. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 32 stainless steel A2 SKU: 65311632A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-32-stainless-steel-a2-sku-65311632a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 32 zinc plated SKU: 65311632](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-32-zinc-plated-sku-65311632/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 25 stainless steel A2 SKU: 65311625A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-25-stainless-steel-a2-sku-65311625a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 25 zinc plated SKU: 65311625](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-25-zinc-plated-sku-65311625/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 20 stainless steel A2 SKU: 65311620A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-20-stainless-steel-a2-sku-65311620a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 20 zinc plated SKU: 65311620](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-20-zinc-plated-sku-65311620/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 16 stainless steel A2 SKU: 65311616A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-16-stainless-steel-a2-sku-65311616a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 16 zinc plated SKU: 65311616](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-16-zinc-plated-sku-65311616/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 12 stainless steel A2 SKU: 65311612A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-12-stainless-steel-a2-sku-65311612a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1.6 x 12 zinc plated SKU: 65311612](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-6-x-12-zinc-plated-sku-65311612/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Washer DIN 6340 for bolt size M16 steel hardened bore 17mm outer diameter 45mm width 6mm SKU: 65311600](https://maedler.in/product/washer-din-6340-for-bolt-size-m16-steel-hardened-bore-17mm-outer-diameter-45mm-width-6mm-sku-65311600/): Material: Quenched and tempered steel, stamped out, pressed flat or machine straightened, hardened. * Diameter d1 = 15mm is not part of the DIN. - [Washer DIN 6340 for bolt size M14 steel hardened bore 15mm outer diameter 40mm width 5mm SKU: 65311400](https://maedler.in/product/washer-din-6340-for-bolt-size-m14-steel-hardened-bore-15mm-outer-diameter-40mm-width-5mm-sku-65311400/): Material: Quenched and tempered steel, stamped out, pressed flat or machine straightened, hardened. * Diameter d1 = 15mm is not part of the DIN. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 32 stainless steel A2 SKU: 65311232A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-32-stainless-steel-a2-sku-65311232a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 32 zinc plated SKU: 65311232](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-32-zinc-plated-sku-65311232/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 25 stainless steel A2 SKU: 65311225A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-25-stainless-steel-a2-sku-65311225a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 25 zinc plated SKU: 65311225](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-25-zinc-plated-sku-65311225/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 20 stainless steel A2 SKU: 65311220A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-20-stainless-steel-a2-sku-65311220a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 20 zinc plated SKU: 65311220](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-20-zinc-plated-sku-65311220/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 16 stainless steel A2 SKU: 65311216A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-16-stainless-steel-a2-sku-65311216a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 16 zinc plated SKU: 65311216](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-16-zinc-plated-sku-65311216/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 12 stainless steel A2 SKU: 65311212A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-12-stainless-steel-a2-sku-65311212a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 12 zinc plated SKU: 65311212](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-12-zinc-plated-sku-65311212/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 10 stainless steel A2 SKU: 65311210A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-10-stainless-steel-a2-sku-65311210a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1,2 x 10 zinc plated SKU: 65311210](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-12-x-10-zinc-plated-sku-65311210/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Washer DIN 6340 for bolt size M12 steel hardened bore 13mm outer diameter 35mm width 5mm SKU: 65311200](https://maedler.in/product/washer-din-6340-for-bolt-size-m12-steel-hardened-bore-13mm-outer-diameter-35mm-width-5mm-sku-65311200/): Material: Quenched and tempered steel, stamped out, pressed flat or machine straightened, hardened. * Diameter d1 = 15mm is not part of the DIN. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 25 stainless steel A2 SKU: 65311025A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-25-stainless-steel-a2-sku-65311025a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 25 zinc plated SKU: 65311025](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-25-zinc-plated-sku-65311025/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 20 stainless steel A2 SKU: 65311020A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-20-stainless-steel-a2-sku-65311020a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 20 zinc plated SKU: 65311020](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-20-zinc-plated-sku-65311020/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 16 stainless steel A2 SKU: 65311016A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-16-stainless-steel-a2-sku-65311016a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 16 zinc plated SKU: 65311016](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-16-zinc-plated-sku-65311016/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 12 stainless steel A2 SKU: 65311012A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-12-stainless-steel-a2-sku-65311012a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 12 zinc plated SKU: 65311012](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-12-zinc-plated-sku-65311012/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 10 stainless steel A2 SKU: 65311010A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-10-stainless-steel-a2-sku-65311010a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 1 x 10 zinc plated SKU: 65311010](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-1-x-10-zinc-plated-sku-65311010/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Washer DIN 6340 for bolt size M10 steel hardened bore 10.5mm outer diameter 28mm width 4mm SKU: 65311000](https://maedler.in/product/washer-din-6340-for-bolt-size-m10-steel-hardened-bore-10-5mm-outer-diameter-28mm-width-4mm-sku-65311000/): Material: Quenched and tempered steel, stamped out, pressed flat or machine straightened, hardened. * Diameter d1 = 15mm is not part of the DIN. - [Washer DIN 6340 for bolt size M8 steel hardened bore 8.4mm outer diameter 23mm width 4mm SKU: 65310800](https://maedler.in/product/washer-din-6340-for-bolt-size-m8-steel-hardened-bore-8-4mm-outer-diameter-23mm-width-4mm-sku-65310800/): Material: Quenched and tempered steel, stamped out, pressed flat or machine straightened, hardened. * Diameter d1 = 15mm is not part of the DIN. - [Washer DIN 6340 for bolt size M6 steel hardened bore 6.4mm outer diameter 17mm width 3mm SKU: 65310600](https://maedler.in/product/washer-din-6340-for-bolt-size-m6-steel-hardened-bore-6-4mm-outer-diameter-17mm-width-3mm-sku-65310600/): Material: Quenched and tempered steel, stamped out, pressed flat or machine straightened, hardened. * Diameter d1 = 15mm is not part of the DIN. - [Track for linear guide DA 0116 RC aluminium length 3600mm SKU: 64990536](https://maedler.in/product/track-for-linear-guide-da-0116-rc-aluminium-length-3600mm-sku-64990536/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes. - [Track for linear guide DA 0116 RC aluminium length 2400mm SKU: 64990524](https://maedler.in/product/track-for-linear-guide-da-0116-rc-aluminium-length-2400mm-sku-64990524/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes. - [Track for linear guide DA 0116 RC aluminium length 1800mm SKU: 64990518](https://maedler.in/product/track-for-linear-guide-da-0116-rc-aluminium-length-1800mm-sku-64990518/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes. - [Track for linear guide DA 0116 RC aluminium length 1200mm SKU: 64990512](https://maedler.in/product/track-for-linear-guide-da-0116-rc-aluminium-length-1200mm-sku-64990512/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes. - [Track for linear guide DA 0116 RC aluminium length 600mm SKU: 64990506](https://maedler.in/product/track-for-linear-guide-da-0116-rc-aluminium-length-600mm-sku-64990506/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes. - [End stops for linear guide DA 0116 RC 2 pieces with 2 screws for the threaded center hole SKU: 64990503](https://maedler.in/product/end-stops-for-linear-guide-da-0116-rc-2-pieces-with-2-screws-for-the-threaded-center-hole-sku-64990503/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes. - [Carriage with polymer balls for linear guide DA 0116 RC SKU: 64990502](https://maedler.in/product/carriage-with-polymer-balls-for-linear-guide-da-0116-rc-sku-64990502/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes. - [Carriage with stainless steel balls for linear guide DA 0116 RC SKU: 64990501](https://maedler.in/product/carriage-with-stainless-steel-balls-for-linear-guide-da-0116-rc-sku-64990501/): Material: Track made from aluminium.Carriage: Stainless steel housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free). All parts have to be ordered seperately.Linear guide for universal use.Video clip (3 minutes) for illustrating Five track lenghts on choice (for to cut by the customer). Tracks without boreholes, for customized mounting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. 649 905 01 = Carriage with stainless steel balls.649 905 02 = Carriage with polymer balls.649 905 03 = Pair of end stops (2 piece with 2 screws for central fixing).649 905 06 = Track, length approx. 6 m.   649 905 12 = Track, length approx. 12 m. 649 905 18 = Track, length approx. 18 m. 649 905 24 = Track, length approx. 24 m.   649 905 36 = Track, length approx. 36 m, with mounting holes. - [Track for linear guide DA 0118 RC aluminium length 2400mm with mounting holes hole center distance 120mm SKU: 64980524H](https://maedler.in/product/track-for-linear-guide-da-0118-rc-aluminium-length-2400mm-with-mounting-holes-hole-center-distance-120mm-sku-64980524h/): Material: Track made from aluminium.Carriage: Aluminium housing with plastic sealings.On choice: With stainless steel balls (greased) or polymer balls (grease free).All parts have to be ordered seperately.Linear guide for universal use. Four track lenghts on choice (for to cut by the customer). On choice without boreholes or with monting holes. Several carriages can be used on one track. Resistant against corrosion and dirt. long service life, tested to 100,000 meters of travel distance. Temperature range: -20°C to +70°C. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 3mm overall length 45.2mm hub diameter 18.2mm SKU: 60161803](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-3mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161803/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 35mm overall length 78mm hub diameter 65mm SKU: 60156635](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-35mm-overall-length-78mm-hub-diameter-65mm-sku-60156635/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 32mm overall length 79mm hub diameter 66mm SKU: 60156632](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-32mm-overall-length-79mm-hub-diameter-66mm-sku-60156632/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 28mm overall length 79mm hub diameter 66mm SKU: 60156628](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-28mm-overall-length-79mm-hub-diameter-66mm-sku-60156628/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 24mm overall length 79mm hub diameter 66mm SKU: 60156624](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-24mm-overall-length-79mm-hub-diameter-66mm-sku-60156624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 19mm overall length 79mm hub diameter 66mm SKU: 60156619](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-19mm-overall-length-79mm-hub-diameter-66mm-sku-60156619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 60Nm both sides bore 14mm overall length 79mm hub diameter 66mm SKU: 60156614](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-60nm-both-sides-bore-14mm-overall-length-79mm-hub-diameter-66mm-sku-60156614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 25mm overall length 65mm hub diameter 56mm SKU: 60155625](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-25mm-overall-length-65mm-hub-diameter-56mm-sku-60155625/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 24mm overall length 65mm hub diameter 56mm SKU: 60155624](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-24mm-overall-length-65mm-hub-diameter-56mm-sku-60155624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 19mm overall length 65mm hub diameter 56mm SKU: 60155619](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-19mm-overall-length-65mm-hub-diameter-56mm-sku-60155619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 14mm overall length 65mm hub diameter 56mm SKU: 60155614](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-14mm-overall-length-65mm-hub-diameter-56mm-sku-60155614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 11mm overall length 65mm hub diameter 56mm SKU: 60155611](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-11mm-overall-length-65mm-hub-diameter-56mm-sku-60155611/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 30Nm both sides bore 10mm overall length 65mm hub diameter 56mm SKU: 60155610](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-30nm-both-sides-bore-10mm-overall-length-65mm-hub-diameter-56mm-sku-60155610/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 25mm overall length 63mm hub diameter 45mm SKU: 60154625](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-25mm-overall-length-63mm-hub-diameter-45mm-sku-60154625/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 24mm overall length 63mm hub diameter 45mm SKU: 60154624](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-24mm-overall-length-63mm-hub-diameter-45mm-sku-60154624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 19mm overall length 63mm hub diameter 45mm SKU: 60154619](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-19mm-overall-length-63mm-hub-diameter-45mm-sku-60154619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 14mm overall length 63mm hub diameter 45mm SKU: 60154614](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-14mm-overall-length-63mm-hub-diameter-45mm-sku-60154614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 11mm overall length 63mm hub diameter 45mm SKU: 60154611](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-11mm-overall-length-63mm-hub-diameter-45mm-sku-60154611/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCK short version MDmax 18Nm both sides bore 10mm overall length 63mm hub diameter 45mm SKU: 60154610](https://maedler.in/product/steel-bellow-coupling-mck-short-version-mdmax-18nm-both-sides-bore-10mm-overall-length-63mm-hub-diameter-45mm-sku-60154610/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 20mm overall length 49.7mm hub diameter 37.4mm SKU: 60153720](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-20mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153720/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 18mm overall length 49.7mm hub diameter 37.4mm SKU: 60153718](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-18mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153718/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 16mm overall length 49.7mm hub diameter 37.4mm SKU: 60153716](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-16mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153716/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 14mm overall length 49.7mm hub diameter 37.4mm SKU: 60153714](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-14mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153714/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 12mm overall length 49.7mm hub diameter 37.4mm SKU: 60153712](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-12mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153712/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 10Nm both sides bore 10mm overall length 49.7mm hub diameter 37.4mm SKU: 60153710](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-10nm-both-sides-bore-10mm-overall-length-49-7mm-hub-diameter-37-4mm-sku-60153710/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 16mm overall length 40mm hub diameter 31.0mm SKU: 60153116](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-16mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153116/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 14mm overall length 40mm hub diameter 31.0mm SKU: 60153114](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-14mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153114/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 12mm overall length 40mm hub diameter 31.0mm SKU: 60153112](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-12mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153112/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 10mm overall length 40mm hub diameter 31.0mm SKU: 60153110](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-10mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153110/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 7.5Nm both sides bore 8mm overall length 40mm hub diameter 31.0mm SKU: 60153108](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-7-5nm-both-sides-bore-8mm-overall-length-40mm-hub-diameter-31-0mm-sku-60153108/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 3.2Nm both sides bore 12mm overall length 37.5mm hub diameter 23.4mm SKU: 60152312](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-3-2nm-both-sides-bore-12mm-overall-length-37-5mm-hub-diameter-23-4mm-sku-60152312/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 3.2Nm both sides bore 10mm overall length 37.5mm hub diameter 23.4mm SKU: 60152310](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-3-2nm-both-sides-bore-10mm-overall-length-37-5mm-hub-diameter-23-4mm-sku-60152310/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 3.2Nm both sides bore 8mm overall length 37.5mm hub diameter 23.4mm SKU: 60152308](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-3-2nm-both-sides-bore-8mm-overall-length-37-5mm-hub-diameter-23-4mm-sku-60152308/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 3.2Nm both sides bore 6mm overall length 37.5mm hub diameter 23.4mm SKU: 60152306](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-3-2nm-both-sides-bore-6mm-overall-length-37-5mm-hub-diameter-23-4mm-sku-60152306/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 8mm overall length 31mm hub diameter 18.2mm SKU: 60151808](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-8mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151808/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 6mm overall length 31mm hub diameter 18.2mm SKU: 60151806](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-6mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151806/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 5mm overall length 31mm hub diameter 18.2mm SKU: 60151805](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-5mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151805/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 4mm overall length 31mm hub diameter 18.2mm SKU: 60151804](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-4mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151804/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBK short version MDmax 2Nm both sides bore 3mm overall length 31mm hub diameter 18.2mm SKU: 60151803](https://maedler.in/product/steel-bellow-coupling-mbk-short-version-mdmax-2nm-both-sides-bore-3mm-overall-length-31mm-hub-diameter-18-2mm-sku-60151803/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Torsionally-stiff coupling HFD with through hole bore 30mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60143400](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-30mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60143400/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 20mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60143200](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-20mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60143200/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60143000](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60143000/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 20mm max. torque 30.0 Nm outside diameter 50mm SKU: 60142400](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-20mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60142400/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 30.0 Nm outside diameter 50mm SKU: 60142200](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60142200/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 30.0 Nm outside diameter 50mm SKU: 60142000](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60142000/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141805](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141805/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141800](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141800/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141605](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141605/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141600](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141600/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141505](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141505/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60141500](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60141500/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141305](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141305/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141300](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141300/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141205](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141205/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141200](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141200/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141105](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141105/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60141100](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60141100/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140905](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140905/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140900](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140900/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140805](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140805/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140800](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140800/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140705](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140705/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60140700](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60140700/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 6mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140305](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-6mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140305/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 6mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140300](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-6mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140300/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 5mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140205](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-5mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140205/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 5mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140200](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-5mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140200/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HFD with through hole bore 4mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140105](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-4mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140105/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HF with blind hole bore 4mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60140100](https://maedler.in/product/torsionally-stiff-coupling-hf-with-blind-hole-bore-4mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60140100/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic Sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20ºC to +60ºC. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 30mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60132705](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-30mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60132705/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 20mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60132605](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-20mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60132605/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 44.0 Nm outside diameter 57.1mm SKU: 60132505](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-44-0-nm-outside-diameter-57-1mm-sku-60132505/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 20mm max. torque 30.0 Nm outside diameter 50mm SKU: 60132005](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-20mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60132005/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 30.0 Nm outside diameter 50mm SKU: 60131905](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60131905/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 30.0 Nm outside diameter 50mm SKU: 60131805](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-30-0-nm-outside-diameter-50mm-sku-60131805/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 17,0 Nm outside diameter 41,3mm SKU: 60131505](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-170-nm-outside-diameter-413mm-sku-60131505/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131500](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131500/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131305](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131305/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131300](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131300/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131205](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131205/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm SKU: 60131200](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-sku-60131200/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60131005](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60131005/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60131000](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60131000/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60130905](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60130905/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60130900](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60130900/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60130805](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60130805/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm SKU: 60130800](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-sku-60130800/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130705](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130705/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130700](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130700/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130605](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130605/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130600](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130600/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130505](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130505/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm SKU: 60130500](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-sku-60130500/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130305](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130305/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 8mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130300](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-8mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130300/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 6mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130205](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-6mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130205/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 6mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130200](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-6mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130200/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZD with through hole bore 4mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130105](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-4mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130105/): Material: Hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Torsionally-stiff coupling HZ with blind hole bore 4mm max. torque 1.7 Nm outside diameter 19.1mm SKU: 60130100](https://maedler.in/product/torsionally-stiff-coupling-hz-with-blind-hole-bore-4mm-max-torque-1-7-nm-outside-diameter-19-1mm-sku-60130100/): Material: Hubs to outside-Ø 12,7mm made of brass, bigger hubs made of aluminium alloy with iridite NCP finish. Sliding disc made of black polyacetal. These 3-part zero-backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. Temperature range: -20°C to +60°C. 1) Operating factors (without shaft displacement): Load Period - Operating Factor short term - 1 1 hour per day - 2 3 hours per day - 4 6 hours per day - 6 12 hours per day - 8 - [Sliding disc spare part for couplings HF, HFD, HZ, HZD outside diameter 57.1mm black polyacetal SKU: 60125700](https://maedler.in/product/sliding-disc-spare-part-for-couplings-hf-hfd-hz-hzd-outside-diameter-57-1mm-black-polyacetal-sku-60125700/): Material: Plastic acetal, black. Fitting to couplings HF, HFD, HZ and HZD. For each coupling, one sliding disc is required. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 28 teeth material steel SKU: 12012800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-28-teeth-material-steel-sku-12012800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 27 teeth material steel SKU: 12012700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-27-teeth-material-steel-sku-12012700/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 26 teeth material steel SKU: 12012600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-26-teeth-material-steel-sku-12012600/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 25 teeth material steel SKU: 12012500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-25-teeth-material-steel-sku-12012500/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 24 teeth material steel SKU: 12012400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-24-teeth-material-steel-sku-12012400/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 23 teeth material steel SKU: 12012300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-23-teeth-material-steel-sku-12012300/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 22 teeth material steel SKU: 12012200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-22-teeth-material-steel-sku-12012200/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 21 teeth material steel SKU: 12012100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-21-teeth-material-steel-sku-12012100/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 20 teeth material steel SKU: 12012000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-20-teeth-material-steel-sku-12012000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 19 teeth material steel SKU: 12011900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-19-teeth-material-steel-sku-12011900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 18 teeth material steel SKU: 12011800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-18-teeth-material-steel-sku-12011800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 17 teeth material steel SKU: 12011700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-17-teeth-material-steel-sku-12011700/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 16 teeth material steel SKU: 12011600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-16-teeth-material-steel-sku-12011600/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 15 teeth material steel SKU: 12011500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-15-teeth-material-steel-sku-12011500/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 14 teeth material steel SKU: 12011400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-14-teeth-material-steel-sku-12011400/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 13 teeth material steel SKU: 12011300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-13-teeth-material-steel-sku-12011300/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 12 teeth material steel SKU: 12011200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-12-teeth-material-steel-sku-12011200/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 11 teeth material steel SKU: 12011100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-11-teeth-material-steel-sku-12011100/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 10 teeth material steel SKU: 12011000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-10-teeth-material-steel-sku-12011000/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 9 teeth material steel SKU: 12010900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-9-teeth-material-steel-sku-12010900/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 8 teeth material steel SKU: 12010800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-05-b-2-pitch-8mm-8-teeth-material-steel-sku-12010800/): Material: Steel, not hardened. Pre-bored. General dimensions: B1 = 2,7 mm, B2 = 8,3 mm, c = 1,0 mm, r3 = 8 mm. Other dimensions: See the table. - [Sprocket KRT 24 B-1 1 1/2" x 1" 57 teeth material cast iron for taper bush typ 3030 SKU: 11077157G](https://maedler.in/product/sprocket-krt-24-b-1-1-1-2-x-1-57-teeth-material-cast-iron-for-taper-bush-typ-3030-sku-11077157g/): Material: Grey cast iron GG25. The teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Sprocket KRT 24 B-1 1 1/2" x 1" 38 teeth material cast iron for taper bush typ 3030 SKU: 11077138G](https://maedler.in/product/sprocket-krt-24-b-1-1-1-2-x-1-38-teeth-material-cast-iron-for-taper-bush-typ-3030-sku-11077138g/): Material: Grey cast iron GG25. The teeth are centered on the wheel body. Ready-to-install, for use with taper-bushings. Taper-bushings are available for varios shaft diameters and have to be ordered seperately.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 57 teeth material steel SKU: 11025700](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-57-teeth-material-steel-sku-11025700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 54 teeth material steel SKU: 11025400](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-54-teeth-material-steel-sku-11025400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 48 teeth material steel SKU: 11024800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-48-teeth-material-steel-sku-11024800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 45 teeth material steel SKU: 11024500](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-45-teeth-material-steel-sku-11024500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 38 teeth material steel SKU: 11023800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-38-teeth-material-steel-sku-11023800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 35 teeth material steel SKU: 11023500](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-35-teeth-material-steel-sku-11023500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 30 teeth material steel SKU: 11023000](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-30-teeth-material-steel-sku-11023000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 28 teeth material steel SKU: 11022800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-28-teeth-material-steel-sku-11022800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 24 teeth material steel SKU: 11022400](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-24-teeth-material-steel-sku-11022400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 22 teeth material steel SKU: 11022200](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-22-teeth-material-steel-sku-11022200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 20 teeth material steel SKU: 11022000](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-20-teeth-material-steel-sku-11022000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 18 teeth material steel SKU: 11021800](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-18-teeth-material-steel-sku-11021800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 16 teeth material steel SKU: 11021600](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-16-teeth-material-steel-sku-11021600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 15 teeth material steel SKU: 11021500](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-15-teeth-material-steel-sku-11021500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 14 teeth material steel SKU: 11021400](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-14-teeth-material-steel-sku-11021400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 13 teeth material steel SKU: 11021300](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-13-teeth-material-steel-sku-11021300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 12 teeth material steel SKU: 11021200](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-12-teeth-material-steel-sku-11021200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 11 teeth material steel SKU: 11021100](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-11-teeth-material-steel-sku-11021100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Plate wheel KRL without hub 24 B-1 1 1/2x1" 10 teeth material steel SKU: 11021000](https://maedler.in/product/plate-wheel-krl-without-hub-24-b-1-1-1-2x1-10-teeth-material-steel-sku-11021000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 57 teeth material cast iron SKU: 11015700](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-57-teeth-material-cast-iron-sku-11015700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 45 teeth material cast iron SKU: 11014500](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-45-teeth-material-cast-iron-sku-11014500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 38 teeth material steel SKU: 11013800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-38-teeth-material-steel-sku-11013800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 30 teeth material steel SKU: 11013000](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-30-teeth-material-steel-sku-11013000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 28 teeth material steel SKU: 11012800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-28-teeth-material-steel-sku-11012800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 25 teeth material steel SKU: 11012500](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-25-teeth-material-steel-sku-11012500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 23 teeth material steel SKU: 11012300](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-23-teeth-material-steel-sku-11012300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 21 teeth material steel SKU: 11012100](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-21-teeth-material-steel-sku-11012100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 20 teeth material steel SKU: 11012000](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-20-teeth-material-steel-sku-11012000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 19 teeth material steel SKU: 11011900](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-19-teeth-material-steel-sku-11011900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 18 teeth material steel SKU: 11011800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-18-teeth-material-steel-sku-11011800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 17 teeth material steel SKU: 11011700](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-17-teeth-material-steel-sku-11011700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 16 teeth material steel SKU: 11011600](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-16-teeth-material-steel-sku-11011600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 15 teeth material steel SKU: 11011500](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-15-teeth-material-steel-sku-11011500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 14 teeth material steel SKU: 11011400](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-14-teeth-material-steel-sku-11011400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 13 teeth material steel SKU: 11011300](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-13-teeth-material-steel-sku-11011300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 12 teeth material steel SKU: 11011200](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-12-teeth-material-steel-sku-11011200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 11 teeth material steel SKU: 11011100](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-11-teeth-material-steel-sku-11011100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 10 teeth material steel SKU: 11011000](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-10-teeth-material-steel-sku-11011000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRS with hub 24 B-1 1 1/2x1" 8 teeth material steel SKU: 11010800](https://maedler.in/product/sprocket-krs-with-hub-24-b-1-1-1-2x1-8-teeth-material-steel-sku-11010800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and more are made from grey cast iron GG25.Sprockets with 28 teeth, 30 teeth and 388 teeth have a welded hub.General dimensions: B1 = 24,1 mm, c = 4,0 mm, r3 = 38 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999125](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999120](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999115](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999113](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRR with hub 20 B-1 1 1/4x3/4" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 10999112](https://maedler.in/product/sprocket-krr-with-hub-20-b-1-1-1-4x3-4-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-10999112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982070](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982070/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982065](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982065/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982060](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982060/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982050](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982050/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982048](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982048/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982045](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982045/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982042](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982042/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982040](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982040/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 20 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10982038](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-20-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10982038/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981970](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981970/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981965](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981965/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981960](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981960/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981950](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981950/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981948](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981948/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981945](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981945/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981942](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981942/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981940](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981940/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 19 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981938](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-19-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981938/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981870](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981870/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981865](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981865/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981860](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981860/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981850](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981850/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981848](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981848/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981845](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981845/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 42H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981842](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-42h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981842/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 40H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981840](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-40h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981840/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 18 teeth material steel bore 38H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981838](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-18-teeth-material-steel-bore-38h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981838/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 70H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981770](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-70h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981770/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 65H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981765](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-65h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981765/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 60H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981760](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-60h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981760/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 50H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981750](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-50h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981750/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 48H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981748](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-48h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981748/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 17 teeth material steel bore 45H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 10981745](https://maedler.in/product/sprocket-krf-with-hub-20-b-1-1-1-4x3-4-17-teeth-material-steel-bore-45h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-10981745/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Ready-to-install, for various shaft diameters. Custom bore H7 - surface parameter Ra 1,6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. General dimensions: B1 = 18,5 mm, c = 3,5 mm, r3 = 32 mm. Other dimensions: See the table. - [Grub screw DIN 6332 with thrust point thread M8 length 40mm steel strength 5.8 black oxide finished SKU: 65400900](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m8-length-40mm-steel-strength-5-8-black-oxide-finished-sku-65400900/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M6 length 50mm steel strength 5.8 black oxide finished SKU: 65400701](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m6-length-50mm-steel-strength-5-8-black-oxide-finished-sku-65400701/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M6 length 50mm steel strength 5.8 black oxide finished SKU: 65400700](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m6-length-50mm-steel-strength-5-8-black-oxide-finished-sku-65400700/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M6 length 30mm steel strength 5.8 black oxide finished SKU: 65400601](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m6-length-30mm-steel-strength-5-8-black-oxide-finished-sku-65400601/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M6 length 30mm steel strength 5.8 black oxide finished SKU: 65400600](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m6-length-30mm-steel-strength-5-8-black-oxide-finished-sku-65400600/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Washer DIN EN ISO 7089 (DIN 125 A) for M30 (31,0x56,0x4,0mm) material stainless V4A SKU: 65399280](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m30-310x560x40mm-material-stainless-v4a-sku-65399280/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M24 (25,0x44,0x4,0mm) material stainless V4A SKU: 65399274](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m24-250x440x40mm-material-stainless-v4a-sku-65399274/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M20 (21,0x37,0x3,0mm) material stainless V4A SKU: 65399270](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m20-210x370x30mm-material-stainless-v4a-sku-65399270/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M16 (17,0x30,0x3,0mm) material stainless V4A SKU: 65399266](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m16-170x300x30mm-material-stainless-v4a-sku-65399266/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M12 (13,0x24,0x2,5mm) material stainless V4A SKU: 65399262](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m12-130x240x25mm-material-stainless-v4a-sku-65399262/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M10 (10,5x20,0x2,0mm) material stainless V4A SKU: 65399260](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m10-105x200x20mm-material-stainless-v4a-sku-65399260/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M8 (8,4x16,0x1,6mm) material stainless V4A SKU: 65399258](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m8-84x160x16mm-material-stainless-v4a-sku-65399258/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M36 (37,0x66,0x5,0mm) material stainless V2A SKU: 65399186](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m36-370x660x50mm-material-stainless-v2a-sku-65399186/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M30 (31,0x56,0x4,0mm) material stainless V2A SKU: 65399180](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m30-310x560x40mm-material-stainless-v2a-sku-65399180/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M24 (25,0x44,0x4,0mm) material stainless V2A SKU: 65399174](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m24-250x440x40mm-material-stainless-v2a-sku-65399174/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M20 (21,0x37,0x3,0mm) material stainless V2A SKU: 65399170](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m20-210x370x30mm-material-stainless-v2a-sku-65399170/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M16 (17,0x30,0x3,0mm) material stainless V2A SKU: 65399166](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m16-170x300x30mm-material-stainless-v2a-sku-65399166/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M12 (13,0x24,0x2,5mm) material stainless V2A SKU: 65399162](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m12-130x240x25mm-material-stainless-v2a-sku-65399162/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M10 (10,5x20,0x2,0mm) material stainless V2A SKU: 65399160](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m10-105x200x20mm-material-stainless-v2a-sku-65399160/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M8 (8,4x16,0x1,6mm) material stainless V2A SKU: 65399158](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m8-84x160x16mm-material-stainless-v2a-sku-65399158/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M6 (6,4x12,0x1,6mm) material stainless V2A SKU: 65399156](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m6-64x120x16mm-material-stainless-v2a-sku-65399156/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M5 (5,3x10,0x1,0mm) material stainless V2A SKU: 65399155](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m5-53x100x10mm-material-stainless-v2a-sku-65399155/): Material: Stainless steel V2A or V4A. - [Washer DIN EN ISO 7089 (DIN 125 A) for M4 (4,3x9,0x0,7mm) material stainless V2A SKU: 65399154](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m4-43x90x07mm-material-stainless-v2a-sku-65399154/): Material: Stainless steel V2A or V4A. - [Turnbuckle similar DIN 1478 steel zinc-plated thread M30 length 255mm SKU: 65393000](https://maedler.in/product/turnbuckle-similar-din-1478-steel-zinc-plated-thread-m30-length-255mm-sku-65393000/): Material: Steel S235, galvanic zinc-plated. These turnbuckle nuts from seamless steel tube are supplied with cross-holes, according to DIN 1478, which serve to check the minimum thread engagement. * Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1478 steel zinc-plated thread M24 length 255mm SKU: 65392400](https://maedler.in/product/turnbuckle-similar-din-1478-steel-zinc-plated-thread-m24-length-255mm-sku-65392400/): Material: Steel S235, galvanic zinc-plated. These turnbuckle nuts from seamless steel tube are supplied with cross-holes, according to DIN 1478, which serve to check the minimum thread engagement. * Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1478 steel zinc-plated thread M20 length 200mm SKU: 65392000](https://maedler.in/product/turnbuckle-similar-din-1478-steel-zinc-plated-thread-m20-length-200mm-sku-65392000/): Material: Steel S235, galvanic zinc-plated. These turnbuckle nuts from seamless steel tube are supplied with cross-holes, according to DIN 1478, which serve to check the minimum thread engagement. * Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1478 steel zinc-plated thread M16 length 170mm SKU: 65391600](https://maedler.in/product/turnbuckle-similar-din-1478-steel-zinc-plated-thread-m16-length-170mm-sku-65391600/): Material: Steel S235, galvanic zinc-plated. These turnbuckle nuts from seamless steel tube are supplied with cross-holes, according to DIN 1478, which serve to check the minimum thread engagement. * Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1478 steel zinc-plated thread M12 length 125mm SKU: 65391200](https://maedler.in/product/turnbuckle-similar-din-1478-steel-zinc-plated-thread-m12-length-125mm-sku-65391200/): Material: Steel S235, galvanic zinc-plated. These turnbuckle nuts from seamless steel tube are supplied with cross-holes, according to DIN 1478, which serve to check the minimum thread engagement. * Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1478 steel zinc-plated thread M10 length 125mm SKU: 65391000](https://maedler.in/product/turnbuckle-similar-din-1478-steel-zinc-plated-thread-m10-length-125mm-sku-65391000/): Material: Steel S235, galvanic zinc-plated. These turnbuckle nuts from seamless steel tube are supplied with cross-holes, according to DIN 1478, which serve to check the minimum thread engagement. * Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1478 steel zinc-plated thread M8 length 110mm SKU: 65390800](https://maedler.in/product/turnbuckle-similar-din-1478-steel-zinc-plated-thread-m8-length-110mm-sku-65390800/): Material: Steel S235, galvanic zinc-plated. These turnbuckle nuts from seamless steel tube are supplied with cross-holes, according to DIN 1478, which serve to check the minimum thread engagement. * Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1478 steel zinc-plated thread M6 length 110mm SKU: 65390600](https://maedler.in/product/turnbuckle-similar-din-1478-steel-zinc-plated-thread-m6-length-110mm-sku-65390600/): Material: Steel S235, galvanic zinc-plated. These turnbuckle nuts from seamless steel tube are supplied with cross-holes, according to DIN 1478, which serve to check the minimum thread engagement. * Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel zinc-plated thread M30 length 125mm SKU: 65388000](https://maedler.in/product/turnbuckle-similar-din-1479-steel-zinc-plated-thread-m30-length-125mm-sku-65388000/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel zinc-plated thread M24 length 115mm SKU: 65387400](https://maedler.in/product/turnbuckle-similar-din-1479-steel-zinc-plated-thread-m24-length-115mm-sku-65387400/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel zinc-plated thread M20 length 95mm SKU: 65387000](https://maedler.in/product/turnbuckle-similar-din-1479-steel-zinc-plated-thread-m20-length-95mm-sku-65387000/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel zinc-plated thread M16 length 75mm SKU: 65386600](https://maedler.in/product/turnbuckle-similar-din-1479-steel-zinc-plated-thread-m16-length-75mm-sku-65386600/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel zinc-plated thread M12 length 55mm SKU: 65386200](https://maedler.in/product/turnbuckle-similar-din-1479-steel-zinc-plated-thread-m12-length-55mm-sku-65386200/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel zinc-plated thread M10 length 45mm SKU: 65386000](https://maedler.in/product/turnbuckle-similar-din-1479-steel-zinc-plated-thread-m10-length-45mm-sku-65386000/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel zinc-plated thread M8 length 35mm SKU: 65385800](https://maedler.in/product/turnbuckle-similar-din-1479-steel-zinc-plated-thread-m8-length-35mm-sku-65385800/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel zinc-plated thread M6 length 30mm SKU: 65385600](https://maedler.in/product/turnbuckle-similar-din-1479-steel-zinc-plated-thread-m6-length-30mm-sku-65385600/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel thread M30 length 125mm SKU: 65383000](https://maedler.in/product/turnbuckle-similar-din-1479-steel-thread-m30-length-125mm-sku-65383000/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel thread M24 length 115mm SKU: 65382400](https://maedler.in/product/turnbuckle-similar-din-1479-steel-thread-m24-length-115mm-sku-65382400/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel thread M20 length 95mm SKU: 65382000](https://maedler.in/product/turnbuckle-similar-din-1479-steel-thread-m20-length-95mm-sku-65382000/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel thread M16 length 75mm SKU: 65381600](https://maedler.in/product/turnbuckle-similar-din-1479-steel-thread-m16-length-75mm-sku-65381600/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel thread M12 length 55mm SKU: 65381200](https://maedler.in/product/turnbuckle-similar-din-1479-steel-thread-m12-length-55mm-sku-65381200/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel thread M10 length 45mm SKU: 65381000](https://maedler.in/product/turnbuckle-similar-din-1479-steel-thread-m10-length-45mm-sku-65381000/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Turnbuckle similar DIN 1479 steel thread M8 length 35mm SKU: 65380800](https://maedler.in/product/turnbuckle-similar-din-1479-steel-thread-m8-length-35mm-sku-65380800/): Material: Steel C45, either untreated or zinc-plated. M6 to M16 with overlapping thread, from M20 middle part relieved. These turnbuckle nuts are supplied with cross-holes, according to DIN 1479, which serve to check the minimum thread engagement. *Threads: one side right-hand thread, other side left-hand thread. - [Washer DIN EN ISO 7089 (DIN 125 A) for M36 (37,0x66,0x5,0mm) material steel zinc plated SKU: 65318600](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m36-370x660x50mm-material-steel-zinc-plated-sku-65318600/): Material: Steel, zinc-plated. - [Split pin DIN EN ISO 1234 (ex DIN 94) 8 x 80 stainless steel A2 SKU: 65318080A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-8-x-80-stainless-steel-a2-sku-65318080a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 8 x 80 zinc plated SKU: 65318080](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-8-x-80-zinc-plated-sku-65318080/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 8 x 63 stainless steel A2 SKU: 65318063A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-8-x-63-stainless-steel-a2-sku-65318063a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 8 x 63 zinc plated SKU: 65318063](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-8-x-63-zinc-plated-sku-65318063/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 8 x 50 stainless steel A2 SKU: 65318050A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-8-x-50-stainless-steel-a2-sku-65318050a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 8 x 50 zinc plated SKU: 65318050](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-8-x-50-zinc-plated-sku-65318050/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Washer DIN EN ISO 7089 (DIN 125 A) for M30 (31,0x56,0x4,0mm) material steel zinc plated SKU: 65318000](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m30-310x560x40mm-material-steel-zinc-plated-sku-65318000/): Material: Steel, zinc-plated. - [Washer DIN EN ISO 7089 (DIN 125 A) for M24 (25,0x44,0x4,0mm) material steel zinc plated SKU: 65317400](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m24-250x440x40mm-material-steel-zinc-plated-sku-65317400/): Material: Steel, zinc-plated. - [Washer DIN EN ISO 7089 (DIN 125 A) for M20 (21,0x37,0x3,0mm) material steel zinc plated SKU: 65317000](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m20-210x370x30mm-material-steel-zinc-plated-sku-65317000/): Material: Steel, zinc-plated. - [Washer DIN EN ISO 7089 (DIN 125 A) for M16 (17,0x30,0x3,0mm) material steel zinc plated SKU: 65316600](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m16-170x300x30mm-material-steel-zinc-plated-sku-65316600/): Material: Steel, zinc-plated. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 80 stainless steel A2 SKU: 65316380A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-80-stainless-steel-a2-sku-65316380a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 80 zinc plated SKU: 65316380](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-80-zinc-plated-sku-65316380/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 63 stainless steel A2 SKU: 65316363A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-63-stainless-steel-a2-sku-65316363a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 63 zinc plated SKU: 65316363](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-63-zinc-plated-sku-65316363/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 50 stainless steel A2 SKU: 65316350A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-50-stainless-steel-a2-sku-65316350a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 50 zinc plated SKU: 65316350](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-50-zinc-plated-sku-65316350/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 40 stainless steel A2 SKU: 65316340A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-40-stainless-steel-a2-sku-65316340a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 40 zinc plated SKU: 65316340](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-40-zinc-plated-sku-65316340/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 36 stainless steel A2 SKU: 65316336A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-36-stainless-steel-a2-sku-65316336a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 36 zinc plated SKU: 65316336](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-36-zinc-plated-sku-65316336/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 32 stainless steel A2 SKU: 65316332A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-32-stainless-steel-a2-sku-65316332a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 6.3 x 32 zinc plated SKU: 65316332](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-6-3-x-32-zinc-plated-sku-65316332/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Washer DIN EN ISO 7089 (DIN 125 A) for M12 (13,0x24,0x2,5mm) material steel zinc plated SKU: 65316200](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m12-130x240x25mm-material-steel-zinc-plated-sku-65316200/): Material: Steel, zinc-plated. - [Washer DIN EN ISO 7089 (DIN 125 A) for M10 (10,5x20,0x2,0mm) material steel zinc plated SKU: 65316000](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m10-105x200x20mm-material-steel-zinc-plated-sku-65316000/): Material: Steel, zinc-plated. - [Washer DIN EN ISO 7089 (DIN 125 A) for M8 (8,4x16,0x1,6mm) material steel zinc plated SKU: 65315800](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m8-84x160x16mm-material-steel-zinc-plated-sku-65315800/): Material: Steel, zinc-plated. - [Washer DIN EN ISO 7089 (DIN 125 A) for M6 (6,4x12,0x1,6mm) material steel zinc plated SKU: 65315600](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m6-64x120x16mm-material-steel-zinc-plated-sku-65315600/): Material: Steel, zinc-plated. - [Washer DIN EN ISO 7089 (DIN 125 A) for M5 (5,3x10,0x1,0mm) material steel zinc plated SKU: 65315500](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m5-53x100x10mm-material-steel-zinc-plated-sku-65315500/): Material: Steel, zinc-plated. - [Washer DIN EN ISO 7089 (DIN 125 A) for M4 (4,3x9,0x0,7mm) material steel zinc plated SKU: 65315400](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m4-43x90x07mm-material-steel-zinc-plated-sku-65315400/): Material: Steel, zinc-plated. - [Washer DIN EN ISO 7089 (DIN 125 A) for M3 (3,2x7,0x0,5mm) material steel zinc plated SKU: 65315300](https://maedler.in/product/washer-din-en-iso-7089-din-125-a-for-m3-32x70x05mm-material-steel-zinc-plated-sku-65315300/): Material: Steel, zinc-plated. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 80 stainless steel A2 SKU: 65315080A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-80-stainless-steel-a2-sku-65315080a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 80 zinc plated SKU: 65315080](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-80-zinc-plated-sku-65315080/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 63 stainless steel A2 SKU: 65315063A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-63-stainless-steel-a2-sku-65315063a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 63 zinc plated SKU: 65315063](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-63-zinc-plated-sku-65315063/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 50 stainless steel A2 SKU: 65315050A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-50-stainless-steel-a2-sku-65315050a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 50 zinc plated SKU: 65315050](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-50-zinc-plated-sku-65315050/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 45 stainless steel A2 SKU: 65315045A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-45-stainless-steel-a2-sku-65315045a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 45 zinc plated SKU: 65315045](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-45-zinc-plated-sku-65315045/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 40 stainless steel A2 SKU: 65315040A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-40-stainless-steel-a2-sku-65315040a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 40 zinc plated SKU: 65315040](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-40-zinc-plated-sku-65315040/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 36 stainless steel A2 SKU: 65315036A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-36-stainless-steel-a2-sku-65315036a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 36 zinc plated SKU: 65315036](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-36-zinc-plated-sku-65315036/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 32 stainless steel A2 SKU: 65315032A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-32-stainless-steel-a2-sku-65315032a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 32 zinc plated SKU: 65315032](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-32-zinc-plated-sku-65315032/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 25 stainless steel A2 SKU: 65315025A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-25-stainless-steel-a2-sku-65315025a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 5 x 25 zinc plated SKU: 65315025](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-5-x-25-zinc-plated-sku-65315025/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 80 stainless steel A2 SKU: 65314080A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-80-stainless-steel-a2-sku-65314080a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 80 zinc plated SKU: 65314080](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-80-zinc-plated-sku-65314080/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 63 stainless steel A2 SKU: 65314063A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-63-stainless-steel-a2-sku-65314063a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 63 zinc plated SKU: 65314063](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-63-zinc-plated-sku-65314063/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 50 stainless steel A2 SKU: 65314050A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-50-stainless-steel-a2-sku-65314050a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 50 zinc plated SKU: 65314050](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-50-zinc-plated-sku-65314050/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 40 stainless steel A2 SKU: 65314040A2](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-40-stainless-steel-a2-sku-65314040a2/): Material: Stainless Steel A2.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Split pin DIN EN ISO 1234 (ex DIN 94) 4 x 40 zinc plated SKU: 65314040](https://maedler.in/product/split-pin-din-en-iso-1234-ex-din-94-4-x-40-zinc-plated-sku-65314040/): Material: Steel, zinc-plated.These pins are used to secure bolts, or nuts on screws. After plugging in, the pointed ends must be bent over. The connection is well protected against unwanted loosening. Note: Such split pins may be used only once. After removing a pin, it needs to be replaced by a new part. - [Flexible coupling EL size 20 nominal torque 40Nm double-length version pilot bore length 110mm outer diameter 45mm SKU: 60204200](https://maedler.in/product/flexible-coupling-el-size-20-nominal-torque-40nm-double-length-version-pilot-bore-length-110mm-outer-diameter-45mm-sku-60204200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 20 nominal torque 40Nm long version pilot bore length 95mm outer diameter 45mm SKU: 60204100](https://maedler.in/product/flexible-coupling-el-size-20-nominal-torque-40nm-long-version-pilot-bore-length-95mm-outer-diameter-45mm-sku-60204100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 20 nominal torque 40Nm short version pilot bore length 80mm outer diameter 45mm SKU: 60204000](https://maedler.in/product/flexible-coupling-el-size-20-nominal-torque-40nm-short-version-pilot-bore-length-80mm-outer-diameter-45mm-sku-60204000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 19 nominal torque 20Nm double-length version pilot bore length 90mm outer diameter 38mm SKU: 60202500](https://maedler.in/product/flexible-coupling-el-size-19-nominal-torque-20nm-double-length-version-pilot-bore-length-90mm-outer-diameter-38mm-sku-60202500/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 19 nominal torque 20Nm long version pilot bore length 80mm outer diameter 38mm SKU: 60202400](https://maedler.in/product/flexible-coupling-el-size-19-nominal-torque-20nm-long-version-pilot-bore-length-80mm-outer-diameter-38mm-sku-60202400/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 19 nominal torque 20Nm short version pilot bore length 65mm outer diameter 38mm SKU: 60202300](https://maedler.in/product/flexible-coupling-el-size-19-nominal-torque-20nm-short-version-pilot-bore-length-65mm-outer-diameter-38mm-sku-60202300/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 16 nominal torque 20Nm double-length version pilot bore length 90mm outer diameter 35mm SKU: 60202200](https://maedler.in/product/flexible-coupling-el-size-16-nominal-torque-20nm-double-length-version-pilot-bore-length-90mm-outer-diameter-35mm-sku-60202200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 16 nominal torque 20Nm long version pilot bore length 80mm outer diameter 35mm SKU: 60202100](https://maedler.in/product/flexible-coupling-el-size-16-nominal-torque-20nm-long-version-pilot-bore-length-80mm-outer-diameter-35mm-sku-60202100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 16 nominal torque 20Nm short version pilot bore length 65mm outer diameter 35mm SKU: 60202000](https://maedler.in/product/flexible-coupling-el-size-16-nominal-torque-20nm-short-version-pilot-bore-length-65mm-outer-diameter-35mm-sku-60202000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 6 nominal torque 2.5Nm double-length version pilot bore length 35mm outer diameter 17mm SKU: 60201800](https://maedler.in/product/flexible-coupling-el-size-6-nominal-torque-2-5nm-double-length-version-pilot-bore-length-35mm-outer-diameter-17mm-sku-60201800/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 6 nominal torque 2.5Nm long version pilot bore length 30mm outer diameter 17mm SKU: 60201700](https://maedler.in/product/flexible-coupling-el-size-6-nominal-torque-2-5nm-long-version-pilot-bore-length-30mm-outer-diameter-17mm-sku-60201700/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 6 nominal torque 2.5Nm short version pilot bore length 25mm outer diameter 17mm SKU: 60201600](https://maedler.in/product/flexible-coupling-el-size-6-nominal-torque-2-5nm-short-version-pilot-bore-length-25mm-outer-diameter-17mm-sku-60201600/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 14 nominal torque 10Nm double-length version pilot bore length 70mm outer diameter 30mm SKU: 60201500](https://maedler.in/product/flexible-coupling-el-size-14-nominal-torque-10nm-double-length-version-pilot-bore-length-70mm-outer-diameter-30mm-sku-60201500/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 14 nominal torque 10Nm long version pilot bore length 60mm outer diameter 30mm SKU: 60201400](https://maedler.in/product/flexible-coupling-el-size-14-nominal-torque-10nm-long-version-pilot-bore-length-60mm-outer-diameter-30mm-sku-60201400/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 14 nominal torque 10Nm short version pilot bore length 50mm outer diameter 30mm SKU: 60201300](https://maedler.in/product/flexible-coupling-el-size-14-nominal-torque-10nm-short-version-pilot-bore-length-50mm-outer-diameter-30mm-sku-60201300/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 12 nominal torque 10Nm double-length version pilot bore length 70mm outer diameter 26mm SKU: 60201200](https://maedler.in/product/flexible-coupling-el-size-12-nominal-torque-10nm-double-length-version-pilot-bore-length-70mm-outer-diameter-26mm-sku-60201200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 12 nominal torque 10Nm long version pilot bore length 60mm outer diameter 26mm SKU: 60201100](https://maedler.in/product/flexible-coupling-el-size-12-nominal-torque-10nm-long-version-pilot-bore-length-60mm-outer-diameter-26mm-sku-60201100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 12 nominal torque 10Nm short version pilot bore length 50mm outer diameter 26mm SKU: 60201000](https://maedler.in/product/flexible-coupling-el-size-12-nominal-torque-10nm-short-version-pilot-bore-length-50mm-outer-diameter-26mm-sku-60201000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 8 nominal torque 5Nm double-length version pilot bore length 50mm outer diameter 21mm SKU: 60200700](https://maedler.in/product/flexible-coupling-el-size-8-nominal-torque-5nm-double-length-version-pilot-bore-length-50mm-outer-diameter-21mm-sku-60200700/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 8 nominal torque 5Nm long version pilot bore length 45mm outer diameter 21mm SKU: 60200600](https://maedler.in/product/flexible-coupling-el-size-8-nominal-torque-5nm-long-version-pilot-bore-length-45mm-outer-diameter-21mm-sku-60200600/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 8 nominal torque 5Nm short version pilot bore length 35mm outer diameter 21mm SKU: 60200500](https://maedler.in/product/flexible-coupling-el-size-8-nominal-torque-5nm-short-version-pilot-bore-length-35mm-outer-diameter-21mm-sku-60200500/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EK nominal torque 1.5Nm with pilot bore overall length 50mm outer diameter 26mm SKU: 60200200](https://maedler.in/product/flexible-coupling-ek-nominal-torque-1-5nm-with-pilot-bore-overall-length-50mm-outer-diameter-26mm-sku-60200200/): Material: Hubs made of zinc diecast, Spring: Spring steel type C zinc-plated. These couplings are elastic all-metal couplings, with hubs and spring bodies made of rustproof metal. The couplings only have a one-layer spring body. They are, however, flexible in all directions, suitable for both rotational directions and maintenance-free. They are locked against rotation with allen set screws. Temperature range from -40°C to +120°C. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EK nominal torque 0.5Nm with pilot bore overall length 35mm outer diameter 16mm SKU: 60200100](https://maedler.in/product/flexible-coupling-ek-nominal-torque-0-5nm-with-pilot-bore-overall-length-35mm-outer-diameter-16mm-sku-60200100/): Material: Hubs made of zinc diecast, Spring: Spring steel type C zinc-plated. These couplings are elastic all-metal couplings, with hubs and spring bodies made of rustproof metal. The couplings only have a one-layer spring body. They are, however, flexible in all directions, suitable for both rotational directions and maintenance-free. They are locked against rotation with allen set screws. Temperature range from -40°C to +120°C. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EK nominal torque 0.15Nm with pilot bore overall length 25mm outer diameter 12mm SKU: 60200000](https://maedler.in/product/flexible-coupling-ek-nominal-torque-0-15nm-with-pilot-bore-overall-length-25mm-outer-diameter-12mm-sku-60200000/): Material: Hubs made of zinc diecast, Spring: Spring steel type C zinc-plated. These couplings are elastic all-metal couplings, with hubs and spring bodies made of rustproof metal. The couplings only have a one-layer spring body. They are, however, flexible in all directions, suitable for both rotational directions and maintenance-free. They are locked against rotation with allen set screws. Temperature range from -40°C to +120°C. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Torsionally-stiff coupling HFD with through hole bore 20mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199424](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-20mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199424/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199422](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199422/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199420](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199420/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199418](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199418/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199416](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199416/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199415](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199415/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199413](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199413/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199412](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199412/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199411](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199411/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199409](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199409/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199408](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199408/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HFD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199407](https://maedler.in/product/torsionally-stiff-coupling-hfd-with-through-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199407/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 20mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199320](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-20mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199320/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199319](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199319/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 30.0 Nm outside diameter 50mm stainless steel 1.4305 SKU: 60199318](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-30-0-nm-outside-diameter-50mm-stainless-steel-1-4305-sku-60199318/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 16mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199315](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-16mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199315/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199313](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199313/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 17.0 Nm outside diameter 41.3mm stainless steel 1.4305 SKU: 60199312](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-17-0-nm-outside-diameter-41-3mm-stainless-steel-1-4305-sku-60199312/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 12mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199310](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-12mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199310/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199309](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199309/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 9.0 Nm outside diameter 33.3mm stainless steel 1.4305 SKU: 60199308](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-9-0-nm-outside-diameter-33-3mm-stainless-steel-1-4305-sku-60199308/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199307](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-10mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199307/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199306](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-8mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199306/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Torsionally-stiff coupling HZD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 SKU: 60199305](https://maedler.in/product/torsionally-stiff-coupling-hzd-with-through-hole-bore-6mm-max-torque-4-0-nm-outside-diameter-25-4mm-stainless-steel-1-4305-sku-60199305/): Material: Hubs made of stainless steel 1.4305 (AISI 303). Sliding disc made of black polyacetal. These 3-part zero backlash couplings provide electrical insulation. They consist of two hubs and a sliding disc. They are versatile and of robust design. Large radial compensation, easy mounting even in confined spaces. Applications: Ideal for stepper motors due to the damping properties of plastic sliding disc. Positioning drives, position encoders and incremental or absolute encoders, pumps etc. - [Membrane coupling MEM with clamping hub bore both sides 28mm max. torque 60Nm SKU: 60173000](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-28mm-max-torque-60nm-sku-60173000/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 20mm max. torque 60Nm SKU: 60172900](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-20mm-max-torque-60nm-sku-60172900/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 20mm max. torque 30Nm SKU: 60172600](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-20mm-max-torque-30nm-sku-60172600/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 16mm max. torque 30Nm SKU: 60172500](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-16mm-max-torque-30nm-sku-60172500/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 16mm max. torque 11.3Nm SKU: 60172100](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-16mm-max-torque-11-3nm-sku-60172100/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 14mm max. torque 11.3Nm SKU: 60172000](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-14mm-max-torque-11-3nm-sku-60172000/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 12mm max. torque 11.3Nm SKU: 60171900](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-12mm-max-torque-11-3nm-sku-60171900/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 10mm max. torque 5.6Nm SKU: 60171500](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-10mm-max-torque-5-6nm-sku-60171500/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 8mm max. torque 5.6Nm SKU: 60171400](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-8mm-max-torque-5-6nm-sku-60171400/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 6mm max. torque 5.6Nm SKU: 60171300](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-6mm-max-torque-5-6nm-sku-60171300/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 8mm max. torque 2.3Nm SKU: 60170900](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-8mm-max-torque-2-3nm-sku-60170900/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 6mm max. torque 2.3Nm SKU: 60170800](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-6mm-max-torque-2-3nm-sku-60170800/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 5mm max. torque 2.3Nm SKU: 60170700](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-5mm-max-torque-2-3nm-sku-60170700/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 6mm max. torque 0.9Nm SKU: 60170300](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-6mm-max-torque-0-9nm-sku-60170300/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Membrane coupling MEM with clamping hub bore both sides 4mm max. torque 0.9Nm SKU: 60170100](https://maedler.in/product/membrane-coupling-mem-with-clamping-hub-bore-both-sides-4mm-max-torque-0-9nm-sku-60170100/): Materials: Hubs and sleeves: Aluminium alloy 2011T3 and 2011T8 BS 4300/5 FC1, clear anodised finish. Membranes: stainless high-quality spring steel. Screw connection: Screws: heat-treated steel, black oxide finish. Bushes: Steel zinc-plated and chromated black. Connecting parts: Heat-treated steel, black oxide finish. Temperature range: -40°C to +120°C. Torsionally-stiff construction, no moving parts, all-metal design, low moment of inertia. The functional principle offers the highest operational readiness to be achieved with flexible couplings. Excellent kinematic properties and high torsion-spring stiffness. Suitable for servo drives. Tolerant flexural system and a dynamically balanced construction for high-end positioning and servo drives. Operating Factors: Type of Load - Operating Factor Uniform Load - 1,5 Alternating Load - 2 Shock load - 3 Reversing shock load - 4 *depth of bore, remaining length relieved. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 35mm overall length 89mm hub diameter 66mm SKU: 60166635](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-35mm-overall-length-89mm-hub-diameter-66mm-sku-60166635/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 32mm overall length 89mm hub diameter 66mm SKU: 60166632](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-32mm-overall-length-89mm-hub-diameter-66mm-sku-60166632/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 28mm overall length 89mm hub diameter 66mm SKU: 60166628](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-28mm-overall-length-89mm-hub-diameter-66mm-sku-60166628/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 24mm overall length 89mm hub diameter 66mm SKU: 60166624](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-24mm-overall-length-89mm-hub-diameter-66mm-sku-60166624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 19mm overall length 89mm hub diameter 66mm SKU: 60166619](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-19mm-overall-length-89mm-hub-diameter-66mm-sku-60166619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 60Nm both sides bore 14mm overall length 89mm hub diameter 66mm SKU: 60166614](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-60nm-both-sides-bore-14mm-overall-length-89mm-hub-diameter-66mm-sku-60166614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 25mm overall length 73mm hub diameter 56mm SKU: 60165625](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-25mm-overall-length-73mm-hub-diameter-56mm-sku-60165625/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 24mm overall length 73mm hub diameter 56mm SKU: 60165624](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-24mm-overall-length-73mm-hub-diameter-56mm-sku-60165624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 19mm overall length 73mm hub diameter 56mm SKU: 60165619](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-19mm-overall-length-73mm-hub-diameter-56mm-sku-60165619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 14mm overall length 73mm hub diameter 56mm SKU: 60165614](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-14mm-overall-length-73mm-hub-diameter-56mm-sku-60165614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 11mm overall length 73mm hub diameter 56mm SKU: 60165611](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-11mm-overall-length-73mm-hub-diameter-56mm-sku-60165611/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 30Nm both sides bore 10mm overall length 73mm hub diameter 56mm SKU: 60165610](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-30nm-both-sides-bore-10mm-overall-length-73mm-hub-diameter-56mm-sku-60165610/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 25mm overall length 71mm hub diameter 45mm SKU: 60164625](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-25mm-overall-length-71mm-hub-diameter-45mm-sku-60164625/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 24mm overall length 71mm hub diameter 45mm SKU: 60164624](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-24mm-overall-length-71mm-hub-diameter-45mm-sku-60164624/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 19mm overall length 71mm hub diameter 45mm SKU: 60164619](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-19mm-overall-length-71mm-hub-diameter-45mm-sku-60164619/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 14mm overall length 71mm hub diameter 45mm SKU: 60164614](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-14mm-overall-length-71mm-hub-diameter-45mm-sku-60164614/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 11mm overall length 71mm hub diameter 45mm SKU: 60164611](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-11mm-overall-length-71mm-hub-diameter-45mm-sku-60164611/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MCL long version MDmax 18Nm both sides bore 10mm overall length 71mm hub diameter 45mm SKU: 60164610](https://maedler.in/product/steel-bellow-coupling-mcl-long-version-mdmax-18nm-both-sides-bore-10mm-overall-length-71mm-hub-diameter-45mm-sku-60164610/): Material: Aluminium clamp hubs, stainless steel bellow. Zero backlash, with high torsional stiffness. For machine tools, packing machines, textile machines, linear drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -30°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore as well feather keyways, available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 20mm overall length 71.4mm hub diameter 37.4mm SKU: 60163720](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-20mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163720/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 18mm overall length 71.4mm hub diameter 37.4mm SKU: 60163718](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-18mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163718/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 16mm overall length 71.4mm hub diameter 37.4mm SKU: 60163716](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-16mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163716/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 14mm overall length 71.4mm hub diameter 37.4mm SKU: 60163714](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-14mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163714/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 12mm overall length 71.4mm hub diameter 37.4mm SKU: 60163712](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-12mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163712/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 5Nm both sides bore 10mm overall length 71.4mm hub diameter 37.4mm SKU: 60163710](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-5nm-both-sides-bore-10mm-overall-length-71-4mm-hub-diameter-37-4mm-sku-60163710/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 16mm overall length 57mm hub diameter 31.0mm SKU: 60163116](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-16mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163116/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 14mm overall length 57mm hub diameter 31.0mm SKU: 60163114](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-14mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163114/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 12mm overall length 57mm hub diameter 31.0mm SKU: 60163112](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-12mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163112/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 10mm overall length 57mm hub diameter 31.0mm SKU: 60163110](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-10mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163110/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 3.8Nm both sides bore 8mm overall length 57mm hub diameter 31.0mm SKU: 60163108](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-3-8nm-both-sides-bore-8mm-overall-length-57mm-hub-diameter-31-0mm-sku-60163108/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1.6Nm both sides bore 12mm overall length 54.3mm hub diameter 23.4mm SKU: 60162312](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1-6nm-both-sides-bore-12mm-overall-length-54-3mm-hub-diameter-23-4mm-sku-60162312/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1.6Nm both sides bore 10mm overall length 54.3mm hub diameter 23.4mm SKU: 60162310](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1-6nm-both-sides-bore-10mm-overall-length-54-3mm-hub-diameter-23-4mm-sku-60162310/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1.6Nm both sides bore 8mm overall length 54.3mm hub diameter 23.4mm SKU: 60162308](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1-6nm-both-sides-bore-8mm-overall-length-54-3mm-hub-diameter-23-4mm-sku-60162308/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1.6Nm both sides bore 6mm overall length 54.3mm hub diameter 23.4mm SKU: 60162306](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1-6nm-both-sides-bore-6mm-overall-length-54-3mm-hub-diameter-23-4mm-sku-60162306/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 8mm overall length 45.2mm hub diameter 18.2mm SKU: 60161808](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-8mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161808/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 6mm overall length 45.2mm hub diameter 18.2mm SKU: 60161806](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-6mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161806/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 5mm overall length 45.2mm hub diameter 18.2mm SKU: 60161805](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-5mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161805/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Steel bellow coupling MBL long version MDmax 1Nm both sides bore 4mm overall length 45.2mm hub diameter 18.2mm SKU: 60161804](https://maedler.in/product/steel-bellow-coupling-mbl-long-version-mdmax-1nm-both-sides-bore-4mm-overall-length-45-2mm-hub-diameter-18-2mm-sku-60161804/): Material: Hubs aluminium, bellow stainless steel. Zero backlash, with high torsional stiffness. For highly dynamic positioning and servo systems, pumps, portal drives etc.. With clamps, ready-to-install for rapid mounting. Temperature range of all types -40°C to +120°C. 1) Standard bores. 2) Different bores (even one-sided) up to max bore available against surcharge.Please regard the operating factors. See PDF-catalog page. - [Ball transfer unit 367 size 22 stainless steel SKU: 65436722](https://maedler.in/product/ball-transfer-unit-367-size-22-stainless-steel-sku-65436722/): Material Type 367: Stainless steel 1.4021. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 367 size 15 stainless steel SKU: 65436715](https://maedler.in/product/ball-transfer-unit-367-size-15-stainless-steel-sku-65436715/): Material Type 367: Stainless steel 1.4021. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 367 size 12 stainless steel SKU: 65436712](https://maedler.in/product/ball-transfer-unit-367-size-12-stainless-steel-sku-65436712/): Material Type 367: Stainless steel 1.4021. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 364 size 45 housing steel zinc plated SKU: 65436445](https://maedler.in/product/ball-transfer-unit-364-size-45-housing-steel-zinc-plated-sku-65436445/): Material Type 364: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 364 size 30 housing steel zinc plated SKU: 65436430](https://maedler.in/product/ball-transfer-unit-364-size-30-housing-steel-zinc-plated-sku-65436430/): Material Type 364: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 364 size 22 housing steel zinc plated SKU: 65436422](https://maedler.in/product/ball-transfer-unit-364-size-22-housing-steel-zinc-plated-sku-65436422/): Material Type 364: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 364 size 15 housing steel zinc plated SKU: 65436415](https://maedler.in/product/ball-transfer-unit-364-size-15-housing-steel-zinc-plated-sku-65436415/): Material Type 364: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 364 size 12 housing steel zinc plated SKU: 65436412](https://maedler.in/product/ball-transfer-unit-364-size-12-housing-steel-zinc-plated-sku-65436412/): Material Type 364: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 363 size 45 stainless steel SKU: 65436345](https://maedler.in/product/ball-transfer-unit-363-size-45-stainless-steel-sku-65436345/): Material Type 363: Stainless steel. Light duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. Size 22 and 30 with felt seal. Without drain hole. Can be used with fixing clip. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 363 size 30 stainless steel SKU: 65436330](https://maedler.in/product/ball-transfer-unit-363-size-30-stainless-steel-sku-65436330/): Material Type 363: Stainless steel. Light duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. Size 22 and 30 with felt seal. Without drain hole. Can be used with fixing clip. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 363 size 22 stainless steel SKU: 65436322](https://maedler.in/product/ball-transfer-unit-363-size-22-stainless-steel-sku-65436322/): Material Type 363: Stainless steel. Light duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. Size 22 and 30 with felt seal. Without drain hole. Can be used with fixing clip. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 363 size 15 stainless steel SKU: 65436315](https://maedler.in/product/ball-transfer-unit-363-size-15-stainless-steel-sku-65436315/): Material Type 363: Stainless steel. Light duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. Size 22 and 30 with felt seal. Without drain hole. Can be used with fixing clip. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 360 size 45 housing steel zinc plated SKU: 65436045](https://maedler.in/product/ball-transfer-unit-360-size-45-housing-steel-zinc-plated-sku-65436045/): Material Type 360: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. Size 22 and 30 with felt seal. Without drain hole. Can be used with fixing clip. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 360 size 30 housing steel zinc plated SKU: 65436030](https://maedler.in/product/ball-transfer-unit-360-size-30-housing-steel-zinc-plated-sku-65436030/): Material Type 360: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. Size 22 and 30 with felt seal. Without drain hole. Can be used with fixing clip. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 360 size 22 housing steel zinc plated SKU: 65436022](https://maedler.in/product/ball-transfer-unit-360-size-22-housing-steel-zinc-plated-sku-65436022/): Material Type 360: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. Size 22 and 30 with felt seal. Without drain hole. Can be used with fixing clip. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 360 size 15 housing steel zinc plated SKU: 65436015](https://maedler.in/product/ball-transfer-unit-360-size-15-housing-steel-zinc-plated-sku-65436015/): Material Type 360: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. Size 22 and 30 with felt seal. Without drain hole. Can be used with fixing clip. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 350 with steel-sheet housing ball diameter 30mm completely from stainless steel SKU: 65435030](https://maedler.in/product/ball-transfer-unit-350-with-steel-sheet-housing-ball-diameter-30mm-completely-from-stainless-steel-sku-65435030/): Material Version 350: Housing and other parts: Stainless steel, Material No. 1.4301.  Ball cup: Stainless steel, Material No. 1.4301, hardened. Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 350 with steel-sheet housing ball diameter 22mm completely from stainless steel SKU: 65435022](https://maedler.in/product/ball-transfer-unit-350-with-steel-sheet-housing-ball-diameter-22mm-completely-from-stainless-steel-sku-65435022/): Material Version 350: Housing and other parts: Stainless steel, Material No. 1.4301.  Ball cup: Stainless steel, Material No. 1.4301, hardened. Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 350 with steel-sheet housing ball diameter 15mm completely from stainless steel SKU: 65435015](https://maedler.in/product/ball-transfer-unit-350-with-steel-sheet-housing-ball-diameter-15mm-completely-from-stainless-steel-sku-65435015/): Material Version 350: Housing and other parts: Stainless steel, Material No. 1.4301.  Ball cup: Stainless steel, Material No. 1.4301, hardened. Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 350 with steel-sheet housing ball diameter 12mm completely from stainless steel SKU: 65435012](https://maedler.in/product/ball-transfer-unit-350-with-steel-sheet-housing-ball-diameter-12mm-completely-from-stainless-steel-sku-65435012/): Material Version 350: Housing and other parts: Stainless steel, Material No. 1.4301.  Ball cup: Stainless steel, Material No. 1.4301, hardened. Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 350 with steel-sheet housing ball diameter 8mm completely from stainless steel SKU: 65435008](https://maedler.in/product/ball-transfer-unit-350-with-steel-sheet-housing-ball-diameter-8mm-completely-from-stainless-steel-sku-65435008/): Material Version 350: Housing and other parts: Stainless steel, Material No. 1.4301.  Ball cup: Stainless steel, Material No. 1.4301, hardened. Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 340 with steel-sheet housing ball diameter 45mm ball from stainless steel SKU: 65434045](https://maedler.in/product/ball-transfer-unit-340-with-steel-sheet-housing-ball-diameter-45mm-ball-from-stainless-steel-sku-65434045/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 340 with steel-sheet housing ball diameter 30mm ball from stainless steel SKU: 65434030](https://maedler.in/product/ball-transfer-unit-340-with-steel-sheet-housing-ball-diameter-30mm-ball-from-stainless-steel-sku-65434030/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 340 with steel-sheet housing ball diameter 22mm ball from stainless steel SKU: 65434022](https://maedler.in/product/ball-transfer-unit-340-with-steel-sheet-housing-ball-diameter-22mm-ball-from-stainless-steel-sku-65434022/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 340 with steel-sheet housing ball diameter 15mm ball from stainless steel SKU: 65434015](https://maedler.in/product/ball-transfer-unit-340-with-steel-sheet-housing-ball-diameter-15mm-ball-from-stainless-steel-sku-65434015/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 340 with steel-sheet housing ball diameter 12mm ball from stainless steel SKU: 65434012](https://maedler.in/product/ball-transfer-unit-340-with-steel-sheet-housing-ball-diameter-12mm-ball-from-stainless-steel-sku-65434012/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 340 with steel-sheet housing ball diameter 8mm ball from stainless steel SKU: 65434008](https://maedler.in/product/ball-transfer-unit-340-with-steel-sheet-housing-ball-diameter-8mm-ball-from-stainless-steel-sku-65434008/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 330 with steel-sheet housing ball diameter 45mm SKU: 65433045](https://maedler.in/product/ball-transfer-unit-330-with-steel-sheet-housing-ball-diameter-45mm-sku-65433045/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 330 with steel-sheet housing ball diameter 30mm SKU: 65433030](https://maedler.in/product/ball-transfer-unit-330-with-steel-sheet-housing-ball-diameter-30mm-sku-65433030/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 330 with steel-sheet housing ball diameter 22mm SKU: 65433022](https://maedler.in/product/ball-transfer-unit-330-with-steel-sheet-housing-ball-diameter-22mm-sku-65433022/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 330 with steel-sheet housing ball diameter 15mm SKU: 65433015](https://maedler.in/product/ball-transfer-unit-330-with-steel-sheet-housing-ball-diameter-15mm-sku-65433015/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 330 with steel-sheet housing ball diameter 12mm SKU: 65433012](https://maedler.in/product/ball-transfer-unit-330-with-steel-sheet-housing-ball-diameter-12mm-sku-65433012/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 330 with steel-sheet housing ball diameter 8mm SKU: 65433008](https://maedler.in/product/ball-transfer-unit-330-with-steel-sheet-housing-ball-diameter-8mm-sku-65433008/): Material Version 330: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 340: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No.: 1.3541. Premium ball transfer unit, for low noise pollution and long service life. With felt seal. See also the tolerance rings: They permit more generous tolerances in the mounting hole. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 320 with fastening element ball diameter 30mm ball from stainless steel SKU: 65432030](https://maedler.in/product/ball-transfer-unit-320-with-fastening-element-ball-diameter-30mm-ball-from-stainless-steel-sku-65432030/): Material Version 310: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 320: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. Due to the special shape of the top part, an assembly plug should be used. With felt seal. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 320 with fastening element ball diameter 22mm ball from stainless steel SKU: 65432022](https://maedler.in/product/ball-transfer-unit-320-with-fastening-element-ball-diameter-22mm-ball-from-stainless-steel-sku-65432022/): Material Version 310: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 320: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. Due to the special shape of the top part, an assembly plug should be used. With felt seal. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 320 with fastening element ball diameter 15mm ball from stainless steel SKU: 65432015](https://maedler.in/product/ball-transfer-unit-320-with-fastening-element-ball-diameter-15mm-ball-from-stainless-steel-sku-65432015/): Material Version 310: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 320: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. Due to the special shape of the top part, an assembly plug should be used. With felt seal. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 310 with fastening element ball diameter 30mm SKU: 65431030](https://maedler.in/product/ball-transfer-unit-310-with-fastening-element-ball-diameter-30mm-sku-65431030/): Material Version 310: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 320: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. Due to the special shape of the top part, an assembly plug should be used. With felt seal. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 310 with fastening element ball diameter 22mm SKU: 65431022](https://maedler.in/product/ball-transfer-unit-310-with-fastening-element-ball-diameter-22mm-sku-65431022/): Material Version 310: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 320: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. Due to the special shape of the top part, an assembly plug should be used. With felt seal. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 310 with fastening element ball diameter 15mm SKU: 65431015](https://maedler.in/product/ball-transfer-unit-310-with-fastening-element-ball-diameter-15mm-sku-65431015/): Material Version 310: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Steel, hardened. Material Version 320: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Ball: Stainless steel, hardened, Material No. 1.3541. Premium ball transfer unit, for low noise pollution and long service life. Due to the special shape of the top part, an assembly plug should be used. With felt seal. Conveying speed max. 2m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 307 screwable plain bearing M16x50 balll and screw stainless steel bearing plastic SKU: 65430746](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m16x50-balll-and-screw-stainless-steel-bearing-plastic-sku-65430746/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 307 screwable plain bearing M16x20 balll and screw stainless steel bearing plastic SKU: 65430741](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m16x20-balll-and-screw-stainless-steel-bearing-plastic-sku-65430741/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 307 screwable plain bearing M12x35 balll and screw stainless steel bearing plastic SKU: 65430734](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m12x35-balll-and-screw-stainless-steel-bearing-plastic-sku-65430734/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 307 screwable plain bearing M12x16 balll and screw stainless steel bearing plastic SKU: 65430731](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m12x16-balll-and-screw-stainless-steel-bearing-plastic-sku-65430731/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 307 screwable plain bearing M10x25 balll and screw stainless steel bearing plastic SKU: 65430724](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m10x25-balll-and-screw-stainless-steel-bearing-plastic-sku-65430724/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 307 screwable plain bearing M10x12 balll and screw stainless steel bearing plastic SKU: 65430721](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m10x12-balll-and-screw-stainless-steel-bearing-plastic-sku-65430721/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 307 screwable plain bearing M8x20 balll and screw stainless steel bearing plastic SKU: 65430714](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m8x20-balll-and-screw-stainless-steel-bearing-plastic-sku-65430714/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 307 screwable plain bearing M8x10 balll and screw stainless steel bearing plastic SKU: 65430711](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m8x10-balll-and-screw-stainless-steel-bearing-plastic-sku-65430711/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 307 screwable plain bearing M6x16 balll and screw stainless steel bearing plastic SKU: 65430704](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m6x16-balll-and-screw-stainless-steel-bearing-plastic-sku-65430704/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 307 screwable plain bearing M6x8 balll and screw stainless steel bearing plastic SKU: 65430701](https://maedler.in/product/ball-transfer-unit-307-screwable-plain-bearing-m6x8-balll-and-screw-stainless-steel-bearing-plastic-sku-65430701/): Material: Housing: Stainless Steel 1.4305 (AISI 303). Ball cup: Plastic. Ball: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M16x50 SKU: 65430646](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m16x50-sku-65430646/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M16x20 SKU: 65430641](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m16x20-sku-65430641/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M12x35 SKU: 65430634](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m12x35-sku-65430634/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M12x16 SKU: 65430631](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m12x16-sku-65430631/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M10x25 SKU: 65430624](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m10x25-sku-65430624/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M10x12 SKU: 65430621](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m10x12-sku-65430621/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M8x20 SKU: 65430614](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m8x20-sku-65430614/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M8x10 SKU: 65430611](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m8x10-sku-65430611/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M6x16 SKU: 65430604](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m6x16-sku-65430604/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [Ball transfer unit 306 screwable plain bearing M6x8 SKU: 65430601](https://maedler.in/product/ball-transfer-unit-306-screwable-plain-bearing-m6x8-sku-65430601/): Material: Housing: Steel, black oxide finish. Ball cup: Plastic. Ball: Steel 100Cr6, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [ball transfer unit 305 size 8,5 ball and housing stainless steel bearing plastic maintenance-free SKU: 65430508](https://maedler.in/product/ball-transfer-unit-305-size-85-ball-and-housing-stainless-steel-bearing-plastic-maintenance-free-sku-65430508/): Material: Housing: Stainless steel. Ball cup: Plastic. Balls: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. The cup must be inserted into a mounting hole with tolerance H7. The knurled housing is self-holding. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [ball transfer unit 305 size 6,5 ball and housing stainless steel bearing plastic maintenance-free SKU: 65430506](https://maedler.in/product/ball-transfer-unit-305-size-65-ball-and-housing-stainless-steel-bearing-plastic-maintenance-free-sku-65430506/): Material: Housing: Stainless steel. Ball cup: Plastic. Balls: Stainless steel, hardened. Mini ball transfer unit, for example for material feeders for processing machines or packing machines. Orientation: anyway. The cup must be inserted into a mounting hole with tolerance H7. The knurled housing is self-holding. Conveying speed max. 1.5m/sec. pv-value max. 0.34 Nm/mm² x m/sec. Temperature range -20°C to +90°C. - [assembly tool for ball transfer unit 305 size 8.5 SKU: 65430502](https://maedler.in/product/assembly-tool-for-ball-transfer-unit-305-size-8-5-sku-65430502/): Material: Aluminium.For mini ball transfer units type 305.The use of this tool avoids damage to the upper, conical part of the housing. - [assembly tool for ball transfer unit 305 size 6.5 SKU: 65430501](https://maedler.in/product/assembly-tool-for-ball-transfer-unit-305-size-6-5-sku-65430501/): Material: Aluminium.For mini ball transfer units type 305.The use of this tool avoids damage to the upper, conical part of the housing. - [Assembly plug for ball transfer units with fatening element ball diameter 30mm bore 30mm SKU: 65430030](https://maedler.in/product/assembly-plug-for-ball-transfer-units-with-fatening-element-ball-diameter-30mm-bore-30mm-sku-65430030/): Material: Aluminium.For ball transfer unit types 310 and 320 with fastening element.Avoids damage to the upper, conical part of the housing. - [Assembly plug for ball transfer units with fatening element ball diameter 22mm bore 24mm SKU: 65430022](https://maedler.in/product/assembly-plug-for-ball-transfer-units-with-fatening-element-ball-diameter-22mm-bore-24mm-sku-65430022/): Material: Aluminium.For ball transfer unit types 310 and 320 with fastening element.Avoids damage to the upper, conical part of the housing. - [Assembly plug for ball transfer units with fastening element ball diameter 15mm bore 17mm SKU: 65430015](https://maedler.in/product/assembly-plug-for-ball-transfer-units-with-fastening-element-ball-diameter-15mm-bore-17mm-sku-65430015/): Material: Aluminium.For ball transfer unit types 310 and 320 with fastening element.Avoids damage to the upper, conical part of the housing. - [Thrust pad factory standard diameter 80mm SKU: 65414000](https://maedler.in/product/thrust-pad-factory-standard-diameter-80mm-sku-65414000/): Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page. - [Thrust pad factory standard diameter 60mm SKU: 65413000](https://maedler.in/product/thrust-pad-factory-standard-diameter-60mm-sku-65413000/): Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page. - [Thrust pad factory standard diameter 48mm SKU: 65412400](https://maedler.in/product/thrust-pad-factory-standard-diameter-48mm-sku-65412400/): Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page. - [Thrust pad DIN 6311 diameter 40mm with snap ring DIN 9045 SKU: 65412000](https://maedler.in/product/thrust-pad-din-6311-diameter-40mm-with-snap-ring-din-9045-sku-65412000/): Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page. - [Thrust pad DIN 6311 diameter 32mm with snap ring DIN 9045 SKU: 65411600](https://maedler.in/product/thrust-pad-din-6311-diameter-32mm-with-snap-ring-din-9045-sku-65411600/): Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page. - [Thrust pad DIN 6311 diameter 25mm with snap ring DIN 9045 SKU: 65411200](https://maedler.in/product/thrust-pad-din-6311-diameter-25mm-with-snap-ring-din-9045-sku-65411200/): Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page. - [Thrust pad DIN 6311 diameter 20mm with snap ring DIN 9045 SKU: 65411000](https://maedler.in/product/thrust-pad-din-6311-diameter-20mm-with-snap-ring-din-9045-sku-65411000/): Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page. - [Thrust pad DIN 6311 diameter 16mm with snap ring DIN 9045 SKU: 65410800](https://maedler.in/product/thrust-pad-din-6311-diameter-16mm-with-snap-ring-din-9045-sku-65410800/): Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page. - [Thrust pad DIN 6311 diameter 12mm with snap ring DIN 9045 SKU: 65410600](https://maedler.in/product/thrust-pad-din-6311-diameter-12mm-with-snap-ring-din-9045-sku-65410600/): Material: Steel turned, case hardened, black oxide finish. Spring retainer included. Up to size d1= 40 mm for grub screws according to DIN 6332. From size d1= 48 mm for grub screws according to factory standard, manufactured according to measuring table at the PDF-catalog page. - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M20 length 150mm steel strength 5.8 black oxide finished SKU: 65403201](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m20-length-150mm-steel-strength-5-8-black-oxide-finished-sku-65403201/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M20 length 150mm steel strength 5.8 black oxide finished SKU: 65403200](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m20-length-150mm-steel-strength-5-8-black-oxide-finished-sku-65403200/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M20 length 125mm steel strength 5.8 black oxide finished SKU: 65403101](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m20-length-125mm-steel-strength-5-8-black-oxide-finished-sku-65403101/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M20 length 125mm steel strength 5.8 black oxide finished SKU: 65403100](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m20-length-125mm-steel-strength-5-8-black-oxide-finished-sku-65403100/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M20 length 100mm steel strength 5.8 black oxide finished SKU: 65403001](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m20-length-100mm-steel-strength-5-8-black-oxide-finished-sku-65403001/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M20 length 100mm steel strength 5.8 black oxide finished SKU: 65403000](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m20-length-100mm-steel-strength-5-8-black-oxide-finished-sku-65403000/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M16 length 125mm steel strength 5.8 black oxide finished SKU: 65402601](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m16-length-125mm-steel-strength-5-8-black-oxide-finished-sku-65402601/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M16 length 125mm steel strength 5.8 black oxide finished SKU: 65402600](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m16-length-125mm-steel-strength-5-8-black-oxide-finished-sku-65402600/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M16 length 100mm steel strength 5.8 black oxide finished SKU: 65402501](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m16-length-100mm-steel-strength-5-8-black-oxide-finished-sku-65402501/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M16 length 100mm steel strength 5.8 black oxide finished SKU: 65402500](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m16-length-100mm-steel-strength-5-8-black-oxide-finished-sku-65402500/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M16 length 80mm steel strength 5.8 black oxide finished SKU: 65402401](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m16-length-80mm-steel-strength-5-8-black-oxide-finished-sku-65402401/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M16 length 80mm steel strength 5.8 black oxide finished SKU: 65402400](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m16-length-80mm-steel-strength-5-8-black-oxide-finished-sku-65402400/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M12 length 100mm steel strength 5.8 black oxide finished SKU: 65402001](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m12-length-100mm-steel-strength-5-8-black-oxide-finished-sku-65402001/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M12 length 100mm steel strength 5.8 black oxide finished SKU: 65402000](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m12-length-100mm-steel-strength-5-8-black-oxide-finished-sku-65402000/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M12 length 80mm steel strength 5.8 black oxide finished SKU: 65401901](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m12-length-80mm-steel-strength-5-8-black-oxide-finished-sku-65401901/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M12 length 80mm steel strength 5.8 black oxide finished SKU: 65401900](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m12-length-80mm-steel-strength-5-8-black-oxide-finished-sku-65401900/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M12 length 60mm steel strength 5.8 black oxide finished SKU: 65401701](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m12-length-60mm-steel-strength-5-8-black-oxide-finished-sku-65401701/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M12 length 60mm steel strength 5.8 black oxide finished SKU: 65401700](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m12-length-60mm-steel-strength-5-8-black-oxide-finished-sku-65401700/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M10 length 80mm steel strength 5.8 black oxide finished SKU: 65401501](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m10-length-80mm-steel-strength-5-8-black-oxide-finished-sku-65401501/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M10 length 80mm steel strength 5.8 black oxide finished SKU: 65401500](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m10-length-80mm-steel-strength-5-8-black-oxide-finished-sku-65401500/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M10 length 60mm steel strength 5.8 black oxide finished SKU: 65401301](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m10-length-60mm-steel-strength-5-8-black-oxide-finished-sku-65401301/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M10 length 60mm steel strength 5.8 black oxide finished SKU: 65401300](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m10-length-60mm-steel-strength-5-8-black-oxide-finished-sku-65401300/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M8 length 60mm steel strength 5.8 black oxide finished SKU: 65401101](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m8-length-60mm-steel-strength-5-8-black-oxide-finished-sku-65401101/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point thread M8 length 60mm steel strength 5.8 black oxide finished SKU: 65401100](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m8-length-60mm-steel-strength-5-8-black-oxide-finished-sku-65401100/): Material: Steel quality 5.8, turned, thrust point hardened, black oxide finish. Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65410600-65414000). - [Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M8 length 40mm steel strength 5.8 black oxide finished SKU: 65400901](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-type-is-with-internal-hexagon-thread-m8-length-40mm-steel-strength-5-8-black-oxide-finished-sku-65400901/): Material: Steel quality 5.8, turned, thrust point hardened, burnished. Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65410600-65414000). - [Beam coupling LA made from stainless steel max. torque 1.5Nm overall length 19.55mm outer diameter 9.52mm both sides bore 4mm SKU: 60299802](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-1-5nm-overall-length-19-55mm-outer-diameter-9-52mm-both-sides-bore-4mm-sku-60299802/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 0.9 Nm overall length 19.55mm outer diameter 9.52mm both sides bore 3mm SKU: 60299800](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-0-9-nm-overall-length-19-55mm-outer-diameter-9-52mm-both-sides-bore-3mm-sku-60299800/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling KA made from stainless steel max. torque 10.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 16mm SKU: 60299634](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-10-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60299634/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 10.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 12mm SKU: 60299632](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-10-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60299632/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 10.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 10mm SKU: 60299630](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-10-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60299630/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 6.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 10mm SKU: 60299628](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-6-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-10mm-sku-60299628/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 6.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 8mm SKU: 60299626](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-6-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-8mm-sku-60299626/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 6.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 6mm SKU: 60299624](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-6-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-6mm-sku-60299624/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 2.7 Nm overall length 22.85mm outer diameter 19.05mm both sides bore 8mm SKU: 60299622](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-2-7-nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60299622/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 2.7 Nm overall length 22.85mm outer diameter 19.05mm both sides bore 6mm SKU: 60299620](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-2-7-nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60299620/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.8 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 6mm SKU: 60299616](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-8-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60299616/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.8 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 5mm SKU: 60299614](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-8-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60299614/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.8 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 4mm SKU: 60299612](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-8-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-4mm-sku-60299612/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.0 Nm overall length 19.05mm outer diameter 12.70mm both sides bore 6mm SKU: 60299610](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-0-nm-overall-length-19-05mm-outer-diameter-12-70mm-both-sides-bore-6mm-sku-60299610/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 1.0 Nm overall length 19.05mm outer diameter 12.70mm both sides bore 4mm SKU: 60299608](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-1-0-nm-overall-length-19-05mm-outer-diameter-12-70mm-both-sides-bore-4mm-sku-60299608/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 0.5 Nm overall length 14.2mm outer diameter 9.52mm both sides bore 3mm SKU: 60299602](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-0-5-nm-overall-length-14-2mm-outer-diameter-9-52mm-both-sides-bore-3mm-sku-60299602/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Beam coupling KA made from stainless steel max. torque 0.45 Nm overall length 12.7mm Aussen-Ø 6.35mm both sides bore 2mm type with setscrews SKU: 60299600](https://maedler.in/product/beam-coupling-ka-made-from-stainless-steel-max-torque-0-45-nm-overall-length-12-7mm-aussen-o-6-35mm-both-sides-bore-2mm-type-with-setscrews-sku-60299600/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash- - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. Part. 60299600 in set-screw style. 1) Against surcharge - [Flexible coupling EL size 28 nominal torque 90 Nm short version pilot bore stainless steel 1.4305 length 100mm outer diameter 55mm SKU: 60299110](https://maedler.in/product/flexible-coupling-el-size-28-nominal-torque-90-nm-short-version-pilot-bore-stainless-steel-1-4305-length-100mm-outer-diameter-55mm-sku-60299110/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 25 nominal torque 90 Nm short version pilot bore stainless steel 1.4305 length 100mm outer diameter 55mm SKU: 60299090](https://maedler.in/product/flexible-coupling-el-size-25-nominal-torque-90-nm-short-version-pilot-bore-stainless-steel-1-4305-length-100mm-outer-diameter-55mm-sku-60299090/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 24 nominal torque 40 Nm short version pilot bore stainless steel 1.4305 length 80mm outer diameter 48mm SKU: 60299043](https://maedler.in/product/flexible-coupling-el-size-24-nominal-torque-40-nm-short-version-pilot-bore-stainless-steel-1-4305-length-80mm-outer-diameter-48mm-sku-60299043/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 20 nominal torque 40 Nm short version pilot bore stainless steel 1.4305 length 80mm outer diameter 45mm SKU: 60299040](https://maedler.in/product/flexible-coupling-el-size-20-nominal-torque-40-nm-short-version-pilot-bore-stainless-steel-1-4305-length-80mm-outer-diameter-45mm-sku-60299040/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 19 nominal torque 20 Nm short version pilot bore stainless steel 1.4305 length 65mm outer diameter 38mm SKU: 60299023](https://maedler.in/product/flexible-coupling-el-size-19-nominal-torque-20-nm-short-version-pilot-bore-stainless-steel-1-4305-length-65mm-outer-diameter-38mm-sku-60299023/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 16 nominal torque 20Nm short version pilot bore stainless steel 1.4305 length 65mm outer diameter 35mm SKU: 60299020](https://maedler.in/product/flexible-coupling-el-size-16-nominal-torque-20nm-short-version-pilot-bore-stainless-steel-1-4305-length-65mm-outer-diameter-35mm-sku-60299020/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 6 nominal torque 2.5Nm short version pilot bore stainless steel 1.4305 length 25mm outer diameter 17mm SKU: 60299016](https://maedler.in/product/flexible-coupling-el-size-6-nominal-torque-2-5nm-short-version-pilot-bore-stainless-steel-1-4305-length-25mm-outer-diameter-17mm-sku-60299016/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 14 nominal torque 10Nm short version pilot bore stainless steel 1.4305 length 50mm outer diameter 30mm SKU: 60299013](https://maedler.in/product/flexible-coupling-el-size-14-nominal-torque-10nm-short-version-pilot-bore-stainless-steel-1-4305-length-50mm-outer-diameter-30mm-sku-60299013/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 12 nominal torque 10 Nm short version pilot bore stainless steel 1.4305 length 50mm outer diameter 26mm SKU: 60299010](https://maedler.in/product/flexible-coupling-el-size-12-nominal-torque-10-nm-short-version-pilot-bore-stainless-steel-1-4305-length-50mm-outer-diameter-26mm-sku-60299010/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 8 nominal torque 5Nm short version pilot bore stainless steel 1.4305 length 35mm outer diameter 21mm SKU: 60299005](https://maedler.in/product/flexible-coupling-el-size-8-nominal-torque-5nm-short-version-pilot-bore-stainless-steel-1-4305-length-35mm-outer-diameter-21mm-sku-60299005/): Material: Hub 1.4305 (AISI 303). Spring: Spring steel 1.4310. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperature range: -40°C to +300°C. The elastic part consists of a spring body, made up of three layers of wound springs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Beam coupling LA made from aluminium max. torque 55Nm overall length 130mm outer diameter 57.15m both sides bore 30mm SKU: 60296800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-55nm-overall-length-130mm-outer-diameter-57-15m-both-sides-bore-30mm-sku-60296800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 55Nm overall length 130mm outer diameter 57.15mm both sides bore 24mm SKU: 60296600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-55nm-overall-length-130mm-outer-diameter-57-15mm-both-sides-bore-24mm-sku-60296600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 40Nm overall length 95.30mm outer diameter 50.8mm both sides bore 24mm SKU: 60296200](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-40nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-24mm-sku-60296200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 40Nm overall length 95.30mm outer diameter 50.8mm both sides bore 19mm SKU: 60296000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-40nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-19mm-sku-60296000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 40Nm overall length 95.30mm outer diameter 50.8mm both sides bore 16mm SKU: 60295800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-40nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-16mm-sku-60295800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 30Nm overall length 76.20mm outer diameter 44.45mm both sides bore 19mm SKU: 60295600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-30nm-overall-length-76-20mm-outer-diameter-44-45mm-both-sides-bore-19mm-sku-60295600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 30Nm overall length 76.20mm outer diameter 44.45mm both sides bore 16mm SKU: 60295400](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-30nm-overall-length-76-20mm-outer-diameter-44-45mm-both-sides-bore-16mm-sku-60295400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 22Nm overall length 66.67mm outer diameter 38.1mm both sides bore 19mm SKU: 60295000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-22nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-19mm-sku-60295000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 22Nm overall length 66.67mm outer diameter 38.1mm both sides bore 16mm SKU: 60294800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-22nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-16mm-sku-60294800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 22Nm overall length 66.67mm outer diameter 38.1mm both sides bore 12mm SKU: 60294600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-22nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-12mm-sku-60294600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 15Nm overall length 57.15mm outer diameter 31.75mm both sides bore 16mm SKU: 60294400](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-15nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60294400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 15Nm overall length 57.15mm outer diameter 31.75mm both sides bore 12mm SKU: 60294200](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-15nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60294200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 15Nm overall length 57.15mm outer diameter 31.75mm both sides bore 10mm SKU: 60294000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-15nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60294000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 10Nm overall length 38.10mm outer diameter 25.4mm both sides bore 10mm SKU: 60293800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-10nm-overall-length-38-10mm-outer-diameter-25-4mm-both-sides-bore-10mm-sku-60293800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 10Nm overall length 38.10mm outer diameter 25.4mm both sides bore 8mm SKU: 60293600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-10nm-overall-length-38-10mm-outer-diameter-25-4mm-both-sides-bore-8mm-sku-60293600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 5 Nm overall length 38.10mm outer diameter 25.4mm both sides bore 6mm SKU: 60293400](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-5-nm-overall-length-38-10mm-outer-diameter-25-4mm-both-sides-bore-6mm-sku-60293400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 5.3Nm overall length 26.50mm outer diameter 19.05mm both sides bore 8mm SKU: 60292600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-5-3nm-overall-length-26-50mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60292600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 3 Nm overall length 26.50mm outer diameter 19.05mm both sides bore 6mm SKU: 60292400](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-3-nm-overall-length-26-50mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60292400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 3.4Nm overall length 25.40mm outer diameter 15.87mm both sides bore 6mm SKU: 60292000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-3-4nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60292000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 2 Nm overall length 25.40mm outer diameter 15.87mm both sides bore 5mm SKU: 60291800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-2-nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60291800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 2 Nm overall length 25.40mm outer diameter 15.87mm both sides bore 4mm SKU: 60291600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-2-nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-4mm-sku-60291600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 2Nm overall length 22.85mm outer diameter 12.7mm both sides bore 6mm SKU: 60290800](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-2nm-overall-length-22-85mm-outer-diameter-12-7mm-both-sides-bore-6mm-sku-60290800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 1.3 Nm overall length 22.85mm outer diameter 12.7mm both sides bore 4mm SKU: 60290600](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-1-3-nm-overall-length-22-85mm-outer-diameter-12-7mm-both-sides-bore-4mm-sku-60290600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 1Nm overall length 19.55mm outer diameter 9.52mm both sides bore 4mm SKU: 60290200](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-1nm-overall-length-19-55mm-outer-diameter-9-52mm-both-sides-bore-4mm-sku-60290200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling LA made from aluminium max. torque 1Nm overall length 19.55mm outer diameter 9.52mm both sides bore 3mm SKU: 60290000](https://maedler.in/product/beam-coupling-la-made-from-aluminium-max-torque-1nm-overall-length-19-55mm-outer-diameter-9-52mm-both-sides-bore-3mm-sku-60290000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. Number of screws: up to Ø D1 =31.75mm only 1 screw on each side. From Ø D1=38,1mm 2 screws on each side. - [Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 16mm SKU: 60273400](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-6-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60273400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 12mm SKU: 60273200](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-6-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60273200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 10mm SKU: 60273000](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-6-0-nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60273000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 4.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 10mm SKU: 60272800](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-4-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-10mm-sku-60272800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 4.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 8mm SKU: 60272600](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-4-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-8mm-sku-60272600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 4.0 Nm overall length 31.75mm outer diameter 25.40mm both sides bore 6mm SKU: 60272400](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-4-0-nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-6mm-sku-60272400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 2.5 Nm overall length 22.85mm outer diameter 19.05mm both sides bore 8mm SKU: 60272200](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-2-5-nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60272200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 2.5 Nm overall length 22.85mm outer diameter 19.05mm both sides bore 6mm SKU: 60272000](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-2-5-nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60272000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 1.5 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 6mm SKU: 60271600](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-1-5-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60271600/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 1.5 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 5mm SKU: 60271400](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-1-5-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60271400/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 1.5 Nm overall length 20.30mm outer diameter 15.87mm both sides bore 4mm SKU: 60271200](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-1-5-nm-overall-length-20-30mm-outer-diameter-15-87mm-both-sides-bore-4mm-sku-60271200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 0.9 Nm overall length 19.05mm outer diameter 12.70mm both sides bore 6mm SKU: 60271000](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-0-9-nm-overall-length-19-05mm-outer-diameter-12-70mm-both-sides-bore-6mm-sku-60271000/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 0.9 Nm overall length 19.05mm outer diameter 12.70mm both sides bore 4mm SKU: 60270800](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-0-9-nm-overall-length-19-05mm-outer-diameter-12-70mm-both-sides-bore-4mm-sku-60270800/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from aluminium max. torque 0.4 Nm overall length 14.2mm outer diameter 9.52mm both sides bore 3mm SKU: 60270200](https://maedler.in/product/beam-coupling-ka-made-from-aluminium-max-torque-0-4-nm-overall-length-14-2mm-outer-diameter-9-52mm-both-sides-bore-3mm-sku-60270200/): Material: Aluminium 2014A. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. Number of screws: 1 screw on each side. - [Beam coupling KA made from plastic max. torque 2.5Nm overall length 44.45mm outer diameter 31.75mm both sides bore 16mm SKU: 60263400](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-2-5nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60263400/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 2.5Nm overall length 44.45mm outer diameter 31.75mm both sides bore 12mm SKU: 60263200](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-2-5nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60263200/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 2.5Nm overall length 44.45mm outer diameter 31.75mm both sides bore 10mm SKU: 60263000](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-2-5nm-overall-length-44-45mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60263000/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 1.4Nm overall length 31.75mm outer diameter 25.40mm both sides bore 10mm SKU: 60262800](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-1-4nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-10mm-sku-60262800/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 1.4Nm overall length 31.75mm outer diameter 25.40mm both sides bore 8mm SKU: 60262600](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-1-4nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-8mm-sku-60262600/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 1.4Nm overall length 31.75mm outer diameter 25.40mm both sides bore 6mm SKU: 60262400](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-1-4nm-overall-length-31-75mm-outer-diameter-25-40mm-both-sides-bore-6mm-sku-60262400/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.64Nm overall length 22.85mm outer diameter 19.05mm both sides bore 8mm SKU: 60262200](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-64nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60262200/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.64Nm overall length 22.85mm outer diameter 19.05mm both sides bore 6mm SKU: 60262000](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-64nm-overall-length-22-85mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60262000/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.35Nm overall length 20.03mm outer diameter 15.87mm both sides bore 6mm SKU: 60261600](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-35nm-overall-length-20-03mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60261600/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.35Nm overall length 20.03mm outer diameter 15.87mm both sides bore 5mm SKU: 60261400](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-35nm-overall-length-20-03mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60261400/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.35Nm overall length 20.03mm outer diameter 15.87mm both sides bore 4mm SKU: 60261200](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-35nm-overall-length-20-03mm-outer-diameter-15-87mm-both-sides-bore-4mm-sku-60261200/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.24Nm overall length 19.05mm outer diameter 12.7mm both sides bore 6mm SKU: 60261000](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-24nm-overall-length-19-05mm-outer-diameter-12-7mm-both-sides-bore-6mm-sku-60261000/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Beam coupling KA made from plastic max. torque 0.24Nm overall length 19.05mm outer diameter 12.7mm both sides bore 4mm SKU: 60260800](https://maedler.in/product/beam-coupling-ka-made-from-plastic-max-torque-0-24nm-overall-length-19-05mm-outer-diameter-12-7mm-both-sides-bore-4mm-sku-60260800/): Material: Plastic polyacetal. - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft can be pushed in further. Middle of coupling is relieved. 1) Against surcharge. - [Flexible coupling EL size 50 nominal torque 500Nm double-length version pilot bore length 300mm, outer diameter 100mm SKU: 60250200](https://maedler.in/product/flexible-coupling-el-size-50-nominal-torque-500nm-double-length-version-pilot-bore-length-300mm-outer-diameter-100mm-sku-60250200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 50 nominal torque 500Nm long version pilot bore length 250mm outer diameter 100mm SKU: 60250100](https://maedler.in/product/flexible-coupling-el-size-50-nominal-torque-500nm-long-version-pilot-bore-length-250mm-outer-diameter-100mm-sku-60250100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 50 nominal torque 500Nm short version pilot bore length 210mm outer diameter 100mm SKU: 60250000](https://maedler.in/product/flexible-coupling-el-size-50-nominal-torque-500nm-short-version-pilot-bore-length-210mm-outer-diameter-100mm-sku-60250000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 40 nominal torque 300Nm double-length version pilot bore length 240mm outer diameter 80mm SKU: 60230200](https://maedler.in/product/flexible-coupling-el-size-40-nominal-torque-300nm-double-length-version-pilot-bore-length-240mm-outer-diameter-80mm-sku-60230200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 40 nominal torque 300Nm long version pilot bore length 200mm outer diameter 80mm SKU: 60230100](https://maedler.in/product/flexible-coupling-el-size-40-nominal-torque-300nm-long-version-pilot-bore-length-200mm-outer-diameter-80mm-sku-60230100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 40 nominal torque 300Nm short version pilot bore length 170mm outer diameter 80mm SKU: 60230000](https://maedler.in/product/flexible-coupling-el-size-40-nominal-torque-300nm-short-version-pilot-bore-length-170mm-outer-diameter-80mm-sku-60230000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 35 nominal torque 220Nm double-length version pilot bore length 210mm outer diameter 75mm SKU: 60222200](https://maedler.in/product/flexible-coupling-el-size-35-nominal-torque-220nm-double-length-version-pilot-bore-length-210mm-outer-diameter-75mm-sku-60222200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 35 nominal torque 220Nm long version pilot bore length 180mm outer diameter 75mm SKU: 60222100](https://maedler.in/product/flexible-coupling-el-size-35-nominal-torque-220nm-long-version-pilot-bore-length-180mm-outer-diameter-75mm-sku-60222100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 35 nominal torque 220Nm short version pilot bore length 150mm outer diameter 75mm SKU: 60222000](https://maedler.in/product/flexible-coupling-el-size-35-nominal-torque-220nm-short-version-pilot-bore-length-150mm-outer-diameter-75mm-sku-60222000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 30 nominal torque 150Nm double-length version pilot bore length 175mm outer diameter 65mm SKU: 60215200](https://maedler.in/product/flexible-coupling-el-size-30-nominal-torque-150nm-double-length-version-pilot-bore-length-175mm-outer-diameter-65mm-sku-60215200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 30 nominal torque 150Nm long version pilot bore length 150mm outer diameter 65mm SKU: 60215100](https://maedler.in/product/flexible-coupling-el-size-30-nominal-torque-150nm-long-version-pilot-bore-length-150mm-outer-diameter-65mm-sku-60215100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 30 nominal torque 150Nm short version pilot bore length 125mm outer diameter 65mm SKU: 60215000](https://maedler.in/product/flexible-coupling-el-size-30-nominal-torque-150nm-short-version-pilot-bore-length-125mm-outer-diameter-65mm-sku-60215000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 28 nominal torque 90Nm doppellange version pilot bore length 140mm outer diameter 55mm SKU: 60211200](https://maedler.in/product/flexible-coupling-el-size-28-nominal-torque-90nm-doppellange-version-pilot-bore-length-140mm-outer-diameter-55mm-sku-60211200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 28 nominal torque 90Nm long version pilot bore length 120mm outer diameter 55mm SKU: 60211100](https://maedler.in/product/flexible-coupling-el-size-28-nominal-torque-90nm-long-version-pilot-bore-length-120mm-outer-diameter-55mm-sku-60211100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 28 nominal torque 90Nm short version pilot bore length 100mm outer diameter 55mm SKU: 60211000](https://maedler.in/product/flexible-coupling-el-size-28-nominal-torque-90nm-short-version-pilot-bore-length-100mm-outer-diameter-55mm-sku-60211000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 25 nominal torque 90Nm double-length version pilot bore length 140mm outer diameter 55mm SKU: 60209200](https://maedler.in/product/flexible-coupling-el-size-25-nominal-torque-90nm-double-length-version-pilot-bore-length-140mm-outer-diameter-55mm-sku-60209200/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 25 nominal torque 90Nm long version pilot bore length 120mm outer diameter 55mm SKU: 60209100](https://maedler.in/product/flexible-coupling-el-size-25-nominal-torque-90nm-long-version-pilot-bore-length-120mm-outer-diameter-55mm-sku-60209100/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 25 nominal torque 90Nm short version pilot bore length 100mm outer diameter 55mm SKU: 60209000](https://maedler.in/product/flexible-coupling-el-size-25-nominal-torque-90nm-short-version-pilot-bore-length-100mm-outer-diameter-55mm-sku-60209000/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 24 nominal torque 40Nm double-length version pilot bore length 110mm outer diameter 48mm SKU: 60204500](https://maedler.in/product/flexible-coupling-el-size-24-nominal-torque-40nm-double-length-version-pilot-bore-length-110mm-outer-diameter-48mm-sku-60204500/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 24 nominal torque 40Nm long version pilot bore length 95mm outer diameter 48mm SKU: 60204400](https://maedler.in/product/flexible-coupling-el-size-24-nominal-torque-40nm-long-version-pilot-bore-length-95mm-outer-diameter-48mm-sku-60204400/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Flexible coupling EL size 24 nominal torque 40Nm short version pilot bore length 80mm outer diameter 48mm SKU: 60204300](https://maedler.in/product/flexible-coupling-el-size-24-nominal-torque-40nm-short-version-pilot-bore-length-80mm-outer-diameter-48mm-sku-60204300/): Material: Hubs 11 SMn Pb 37, from Ø 55 mm CK45. Spring: Spring steel type C. These couplings are elastic all-metal couplings and completely maintenance free. The all-metal design leads to a strong resistance against oil and higher temperatures: -40°C to +100°C. The elastic part consists of a spring body, made up of three layers of wound springs welded into the connecting hubs. The couplings are suitable for both rotating directions. They can be locked against rotation with a feather key or with pins. The couplings are pressfitted. Demounting is done by pressing or pulling off. Vibrations and shocks are largely absorbed. Depending on the length of the coupling - S, L or Db - bending of 3 - 6° or axial displacement of 3 - 6% of the nominal shaft diametre are possible. Couplings are available pre-drilled ex stock. Customized bores and feather-key grooves available at surcharge. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M16 x 25mm long SKU: 65451625](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m16-x-25mm-long-sku-65451625/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M16 x 20mm long SKU: 65451620](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m16-x-20mm-long-sku-65451620/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M12 x 40mm long SKU: 65451240](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m12-x-40mm-long-sku-65451240/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M12 x 30mm long SKU: 65451230](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m12-x-30mm-long-sku-65451230/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M12 x 20mm long SKU: 65451220](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m12-x-20mm-long-sku-65451220/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M12 x 16mm long SKU: 65451216](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m12-x-16mm-long-sku-65451216/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M10 x 35mm long SKU: 65451035](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m10-x-35mm-long-sku-65451035/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M10 x 25mm long SKU: 65451025](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m10-x-25mm-long-sku-65451025/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M10 x 16mm long SKU: 65451016](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m10-x-16mm-long-sku-65451016/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M10 x 12mm long SKU: 65451012](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m10-x-12mm-long-sku-65451012/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M8 x 30mm long SKU: 65450830](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m8-x-30mm-long-sku-65450830/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M8 x 20mm long SKU: 65450820](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m8-x-20mm-long-sku-65450820/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M8 x 12mm long SKU: 65450812](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m8-x-12mm-long-sku-65450812/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M8 x 10mm long SKU: 65450810](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m8-x-10mm-long-sku-65450810/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M6 x 25mm long SKU: 65450625](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m6-x-25mm-long-sku-65450625/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M6 x 16mm long SKU: 65450616](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m6-x-16mm-long-sku-65450616/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M6 x 10mm long SKU: 65450610](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m6-x-10mm-long-sku-65450610/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M5 x 20mm long SKU: 65450520](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m5-x-20mm-long-sku-65450520/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M5 x 12mm long SKU: 65450512](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m5-x-12mm-long-sku-65450512/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M5 x 8mm long SKU: 65450508](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m5-x-8mm-long-sku-65450508/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M4 x 16mm long SKU: 65450416](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m4-x-16mm-long-sku-65450416/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M4 x 10mm long SKU: 65450410](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m4-x-10mm-long-sku-65450410/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M4 x 6mm long SKU: 65450406](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m4-x-6mm-long-sku-65450406/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M3 x 10mm SKU: 65450310](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m3-x-10mm-sku-65450310/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M3 x 8mm SKU: 65450308](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m3-x-8mm-sku-65450308/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M3 x 5mm SKU: 65450305](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m3-x-5mm-sku-65450305/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Swing bolt DIN 444 thread M20 x 63mm l1=160mm steel strength 5.8 black oxide finished SKU: 65443000](https://maedler.in/product/swing-bolt-din-444-thread-m20-x-63mm-l1160mm-steel-strength-5-8-black-oxide-finished-sku-65443000/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M20 x 63mm l1=130mm steel strength 5.8 black oxide finished SKU: 65442900](https://maedler.in/product/swing-bolt-din-444-thread-m20-x-63mm-l1130mm-steel-strength-5-8-black-oxide-finished-sku-65442900/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M20 x 63mm l1=100mm steel strength 5.8 black oxide finished SKU: 65442800](https://maedler.in/product/swing-bolt-din-444-thread-m20-x-63mm-l1100mm-steel-strength-5-8-black-oxide-finished-sku-65442800/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M16 x 50mm l1=130mm steel strength 5.8 black oxide finished SKU: 65442600](https://maedler.in/product/swing-bolt-din-444-thread-m16-x-50mm-l1130mm-steel-strength-5-8-black-oxide-finished-sku-65442600/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M16 x 50mm l1=100mm steel strength 5.8 black oxide finished SKU: 65442500](https://maedler.in/product/swing-bolt-din-444-thread-m16-x-50mm-l1100mm-steel-strength-5-8-black-oxide-finished-sku-65442500/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M16 x 50mm l1=75mm steel strength 5.8 black oxide finished SKU: 65442400](https://maedler.in/product/swing-bolt-din-444-thread-m16-x-50mm-l175mm-steel-strength-5-8-black-oxide-finished-sku-65442400/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M12 x 40mm l1=130mm steel strength 5.8 black oxide finished SKU: 65442100](https://maedler.in/product/swing-bolt-din-444-thread-m12-x-40mm-l1130mm-steel-strength-5-8-black-oxide-finished-sku-65442100/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M12 x 40mm l1=100mm steel strength 5.8 black oxide finished SKU: 65442000](https://maedler.in/product/swing-bolt-din-444-thread-m12-x-40mm-l1100mm-steel-strength-5-8-black-oxide-finished-sku-65442000/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M12 x 40mm l1=75mm steel strength 5.8 black oxide finished SKU: 65441800](https://maedler.in/product/swing-bolt-din-444-thread-m12-x-40mm-l175mm-steel-strength-5-8-black-oxide-finished-sku-65441800/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M10 x 40mm l1=100mm steel strength 5.8 black oxide finished SKU: 65441600](https://maedler.in/product/swing-bolt-din-444-thread-m10-x-40mm-l1100mm-steel-strength-5-8-black-oxide-finished-sku-65441600/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M10 x 40mm l1=75mm steel strength 5.8 black oxide finished SKU: 65441500](https://maedler.in/product/swing-bolt-din-444-thread-m10-x-40mm-l175mm-steel-strength-5-8-black-oxide-finished-sku-65441500/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M10 x 40mm l1=50mm steel strength 5.8 black oxide finished SKU: 65441400](https://maedler.in/product/swing-bolt-din-444-thread-m10-x-40mm-l150mm-steel-strength-5-8-black-oxide-finished-sku-65441400/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M8 x 32mm l1=75mm steel strength 5.8 black oxide finished SKU: 65441100](https://maedler.in/product/swing-bolt-din-444-thread-m8-x-32mm-l175mm-steel-strength-5-8-black-oxide-finished-sku-65441100/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M8 x 32mm l1=50mm steel strength 5.8 black oxide finished SKU: 65441000](https://maedler.in/product/swing-bolt-din-444-thread-m8-x-32mm-l150mm-steel-strength-5-8-black-oxide-finished-sku-65441000/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M6 x 32mm l1=75mm steel strength 5.8 black oxide finished SKU: 65440700](https://maedler.in/product/swing-bolt-din-444-thread-m6-x-32mm-l175mm-steel-strength-5-8-black-oxide-finished-sku-65440700/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M6 x 32mm l1=50mm steel strength 5.8 black oxide finished SKU: 65440600](https://maedler.in/product/swing-bolt-din-444-thread-m6-x-32mm-l150mm-steel-strength-5-8-black-oxide-finished-sku-65440600/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M5 x 32mm l1=75mm steel strength 5.8 black oxide finished SKU: 65440500](https://maedler.in/product/swing-bolt-din-444-thread-m5-x-32mm-l175mm-steel-strength-5-8-black-oxide-finished-sku-65440500/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Swing bolt DIN 444 thread M5 x 32mm l1=50mm steel strength 5.8 black oxide finished SKU: 65440400](https://maedler.in/product/swing-bolt-din-444-thread-m5-x-32mm-l150mm-steel-strength-5-8-black-oxide-finished-sku-65440400/): Material: Steel, tensile strength 5.8, black oxide finish. Precision made, thread rolled. Steel version with higher strength than DIN. The thread lentgh is larger than DIN. - [Fixing clip D=45mm stainless steel SKU: 65439245](https://maedler.in/product/fixing-clip-d45mm-stainless-steel-sku-65439245/): Material: Stainless steel. Matching to ball transfer units with flange and the same housing diameter D like the fixing clip. By using these clips, the fitting height increases 0.3mm. 1) Seating bore. - [Fixing clip D=36mm stainless steel SKU: 65439236](https://maedler.in/product/fixing-clip-d36mm-stainless-steel-sku-65439236/): Material Standard: Spring band steel. Material Stainless: Stainless steel. Matching to ball transfer units with flange and the same housing diameter D like the fixing clip. By using these clips, the fitting height increases 0.3 mm. 1) Seating bore. - [Fixing clip D=24mm stainless steel SKU: 65439224](https://maedler.in/product/fixing-clip-d24mm-stainless-steel-sku-65439224/): Material: Stainless steel. Matching to ball transfer units with flange and the same housing diameter D like the fixing clip. By using these clips, the fitting height increases 0.3mm. 1) Seating bore. - [Fixing clip D=62mm spring band steel SKU: 65439162](https://maedler.in/product/fixing-clip-d62mm-spring-band-steel-sku-65439162/): Material Standard: Spring band steel. Material Stainless: Stainless steel. Matching to ball transfer units with flange and the same housing diameter D like the fixing clip. By using these clips, the fitting height increases 0.3 mm. 1) Seating bore. - [Fixing clip D=45mm spring band steel SKU: 65439145](https://maedler.in/product/fixing-clip-d45mm-spring-band-steel-sku-65439145/): Material Standard: Spring band steel. Material Stainless: Stainless steel. Matching to ball transfer units with flange and the same housing diameter D like the fixing clip. By using these clips, the fitting height increases 0.3 mm. 1) Seating bore. - [Fixing clip D=36mm spring band steel SKU: 65439136](https://maedler.in/product/fixing-clip-d36mm-spring-band-steel-sku-65439136/): Material: Stainless steel. Matching to ball transfer units with flange and the same housing diameter D like the fixing clip. By using these clips, the fitting height increases 0.3mm. 1) Seating bore. - [Fixing clip D=24mm spring band steel SKU: 65439124](https://maedler.in/product/fixing-clip-d24mm-spring-band-steel-sku-65439124/): Material Standard: Spring band steel. Material Stainless: Stainless steel. Matching to ball transfer units with flange and the same housing diameter D like the fixing clip. By using these clips, the fitting height increases 0.3 mm. 1) Seating bore. - [Tolerance ring 64x15mm for body diameter 62mm SKU: 65439045](https://maedler.in/product/tolerance-ring-64x15mm-for-body-diameter-62mm-sku-65439045/): Material: Spring band steel.Matching ball transfer units with the same housing diameter D like the tolerance ring. The use of tolerance rings permits more generous tolerances in the mounting hole (dimension DTR).* Bore size. Recommended bore tolerance: H9. - [Tolerance ring 47x12mm for body diameter 45mm SKU: 65439030](https://maedler.in/product/tolerance-ring-47x12mm-for-body-diameter-45mm-sku-65439030/): Material: Spring band steel.Matching ball transfer units with the same housing diameter D like the tolerance ring. The use of tolerance rings permits more generous tolerances in the mounting hole (dimension DTR).* Bore size. Recommended bore tolerance: H9. - [Tolerance ring 38x12mm for body diameter 36mm SKU: 65439022](https://maedler.in/product/tolerance-ring-38x12mm-for-body-diameter-36mm-sku-65439022/): Material: Spring band steel.Matching ball transfer units with the same housing diameter D like the tolerance ring. The use of tolerance rings permits more generous tolerances in the mounting hole (dimension DTR).* Bore size. Recommended bore tolerance: H9. - [Tolerance ring 26x7mm for body diameter 24mm SKU: 65439015](https://maedler.in/product/tolerance-ring-26x7mm-for-body-diameter-24mm-sku-65439015/): Material: Spring band steel.Matching ball transfer units with the same housing diameter D like the tolerance ring. The use of tolerance rings permits more generous tolerances in the mounting hole (dimension DTR).* Bore size. Recommended bore tolerance: H9. - [Tolerance ring 20x6mm for body diameter 18mm SKU: 65439012](https://maedler.in/product/tolerance-ring-20x6mm-for-body-diameter-18mm-sku-65439012/): Material: Spring band steel.Matching ball transfer units with the same housing diameter D like the tolerance ring. The use of tolerance rings permits more generous tolerances in the mounting hole (dimension DTR).* Bore size. Recommended bore tolerance: H9. - [Tolerance ring 14x6mm for body diameter 12.6mm SKU: 65439008](https://maedler.in/product/tolerance-ring-14x6mm-for-body-diameter-12-6mm-sku-65439008/): Material: Spring band steel.Matching ball transfer units with the same housing diameter D like the tolerance ring. The use of tolerance rings permits more generous tolerances in the mounting hole (dimension DTR).* Bore size. Recommended bore tolerance: H9. - [Ball transfer unit 388 size 38,1 total height 60,3mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65438838](https://maedler.in/product/ball-transfer-unit-388-size-381-total-height-603mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65438838/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 388 size 25,4 total height 44,5mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65438826](https://maedler.in/product/ball-transfer-unit-388-size-254-total-height-445mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65438826/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 388 size 25,4 total height 41,3mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65438825](https://maedler.in/product/ball-transfer-unit-388-size-254-total-height-413mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65438825/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 388 size 12,7 total height 22,2mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65438812](https://maedler.in/product/ball-transfer-unit-388-size-127-total-height-222mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65438812/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 387 size 25,4 stainless steel SKU: 65438726](https://maedler.in/product/ball-transfer-unit-387-size-254-stainless-steel-sku-65438726/): Material Type 387: Stainless steel. Light duty ball transfer unit for low load. Orientation: Ball up or horizontal. With felt seal and drain hole. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. 1) Slot hole.Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 386 size 25,4 housing steel zinc plated SKU: 65438626](https://maedler.in/product/ball-transfer-unit-386-size-254-housing-steel-zinc-plated-sku-65438626/): Material Type 386: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for low load. Orientation: Ball up or horizontal. With felt seal and drain hole. Conveying speed max. 1m/sec. Temperature range -20°C to +70°C. 1) Slot hole. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 384 size 38,1 total height 60mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65438438](https://maedler.in/product/ball-transfer-unit-384-size-381-total-height-60mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65438438/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 384 size 25,4 total height 44,5mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65438426](https://maedler.in/product/ball-transfer-unit-384-size-254-total-height-445mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65438426/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 384 size 25,4 total height 41,3mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65438425](https://maedler.in/product/ball-transfer-unit-384-size-254-total-height-413mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65438425/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 384 size 12,7 total height 22,2mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65438412](https://maedler.in/product/ball-transfer-unit-384-size-127-total-height-222mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65438412/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. 1) Elliptical flange with 2 bores. 2) Not countersunk. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 383 size 32 stainless steel SKU: 65438332](https://maedler.in/product/ball-transfer-unit-383-size-32-stainless-steel-sku-65438332/): Material Type 383: Stainless steel. Light duty ball transfer unit for low load. Orientation: Ball up or horizontal. From size 19 with felt seal and drain hole. Size 32 stainless is without felt seal. Conveying speed max. 1m/sec.Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 383 size 19 stainless steel SKU: 65438319](https://maedler.in/product/ball-transfer-unit-383-size-19-stainless-steel-sku-65438319/): Material Type 383: Stainless steel. Light duty ball transfer unit for low load. Orientation: Ball up or horizontal. From size 19 with felt seal and drain hole. Size 32 stainless is without felt seal. Conveying speed max. 1m/sec.Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 380 size 32 housing steel zinc plated SKU: 65438032](https://maedler.in/product/ball-transfer-unit-380-size-32-housing-steel-zinc-plated-sku-65438032/): Material Type 380: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for low load. Orientation: Ball up or horizontal. From size 19 with felt seal and drain hole. Size 32 stainless is without felt seal. Conveying speed max. 1m/sec.Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. T herefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 380 size 25 housing steel zinc plated SKU: 65438025](https://maedler.in/product/ball-transfer-unit-380-size-25-housing-steel-zinc-plated-sku-65438025/): Material Type 380: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for low load. Orientation: Ball up or horizontal. From size 19 with felt seal and drain hole. Size 32 stainless is without felt seal. Conveying speed max. 1m/sec.Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. T herefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 380 size 23 housing steel zinc plated SKU: 65438023](https://maedler.in/product/ball-transfer-unit-380-size-23-housing-steel-zinc-plated-sku-65438023/): Material Type 380: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for low load. Orientation: Ball up or horizontal. From size 19 with felt seal and drain hole. Size 32 stainless is without felt seal. Conveying speed max. 1m/sec.Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. T herefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 380 size 19 housing steel zinc plated SKU: 65438019](https://maedler.in/product/ball-transfer-unit-380-size-19-housing-steel-zinc-plated-sku-65438019/): Material Type 380: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for low load. Orientation: Ball up or horizontal. From size 19 with felt seal and drain hole. Size 32 stainless is without felt seal. Conveying speed max. 1m/sec.Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. T herefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 380 size 15 housing steel zinc plated SKU: 65438015](https://maedler.in/product/ball-transfer-unit-380-size-15-housing-steel-zinc-plated-sku-65438015/): Material Type 380: Housing: Steel, zinc-plated.  Ball cup: Steel.  Balls: Steel, hardened. Light duty ball transfer unit for low load. Orientation: Ball up or horizontal. From size 19 with felt seal and drain hole. Size 32 stainless is without felt seal. Conveying speed max. 1m/sec.Temperature range -20°C to +70°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. T herefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 378 size 38,1 diameter 60mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437838](https://maedler.in/product/ball-transfer-unit-378-size-381-diameter-60mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437838/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 378 size 25,4 diameter 50mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437826](https://maedler.in/product/ball-transfer-unit-378-size-254-diameter-50mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437826/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 378 size 25,4 diameter 44mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437825](https://maedler.in/product/ball-transfer-unit-378-size-254-diameter-44mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437825/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 378 size 12,7 diameter 20,6mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437813](https://maedler.in/product/ball-transfer-unit-378-size-127-diameter-206mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437813/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 378 size 12,7 diameter 20mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437812](https://maedler.in/product/ball-transfer-unit-378-size-127-diameter-20mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437812/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec.Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 377 size 22 stainless steel SKU: 65437722](https://maedler.in/product/ball-transfer-unit-377-size-22-stainless-steel-sku-65437722/): Material Type 377: Stainless steel 1.4021. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal. Without drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 377 size 19 stainless steel SKU: 65437719](https://maedler.in/product/ball-transfer-unit-377-size-19-stainless-steel-sku-65437719/): Material Type 377: Stainless steel 1.4021. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal. Without drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 376 size 30 housing steel zinc plated SKU: 65437630](https://maedler.in/product/ball-transfer-unit-376-size-30-housing-steel-zinc-plated-sku-65437630/): Material Type 376: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal. Without drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 376 size 22 housing steel zinc plated SKU: 65437622](https://maedler.in/product/ball-transfer-unit-376-size-22-housing-steel-zinc-plated-sku-65437622/): Material Type 376: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal. Without drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 376 size 19 housing steel zinc plated SKU: 65437619](https://maedler.in/product/ball-transfer-unit-376-size-19-housing-steel-zinc-plated-sku-65437619/): Material Type 376: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal. Without drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 376 size 15 housing steel zinc plated SKU: 65437615](https://maedler.in/product/ball-transfer-unit-376-size-15-housing-steel-zinc-plated-sku-65437615/): Material Type 376: Housing: Steel, zinc-plated.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal. Without drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 374 size 30 housing steel black oxide finished SKU: 65437430](https://maedler.in/product/ball-transfer-unit-374-size-30-housing-steel-black-oxide-finished-sku-65437430/): Material: Housing: Steel, black oxide finish. Inside this sleeve, there is a zinc-plated ball cup. Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load, springloaded. Orientation: Ball up or horizontal. Shock loads may be higher than the stated load range. At force Fs max the end of spring travel is reached. With drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. * Bore size. Recommended bore tolerance: H9. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 374 size 25.4 housing steel black oxide finished SKU: 65437425](https://maedler.in/product/ball-transfer-unit-374-size-25-4-housing-steel-black-oxide-finished-sku-65437425/): Material: Housing: Steel, black oxide finish. Inside this sleeve, there is a zinc-plated ball cup. Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load, springloaded. Orientation: Ball up or horizontal. Shock loads may be higher than the stated load range. At force Fs max the end of spring travel is reached. With drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. * Bore size. Recommended bore tolerance: H9. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 374 size 15.8 housing steel black oxide finished SKU: 65437415](https://maedler.in/product/ball-transfer-unit-374-size-15-8-housing-steel-black-oxide-finished-sku-65437415/): Material: Housing: Steel, black oxide finish. Inside this sleeve, there is a zinc-plated ball cup. Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load, springloaded. Orientation: Ball up or horizontal. Shock loads may be higher than the stated load range. At force Fs max the end of spring travel is reached. With drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. * Bore size. Recommended bore tolerance: H9. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 374 size 12.7 housing steel black oxide finished SKU: 65437412](https://maedler.in/product/ball-transfer-unit-374-size-12-7-housing-steel-black-oxide-finished-sku-65437412/): Material: Housing: Steel, black oxide finish. Inside this sleeve, there is a zinc-plated ball cup. Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load, springloaded. Orientation: Ball up or horizontal. Shock loads may be higher than the stated load range. At force Fs max the end of spring travel is reached. With drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. * Bore size. Recommended bore tolerance: H9. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 370 size 38,1 total height 60,3mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437038](https://maedler.in/product/ball-transfer-unit-370-size-381-total-height-603mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437038/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 370 size 25,4 total height 50,8mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437026](https://maedler.in/product/ball-transfer-unit-370-size-254-total-height-508mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437026/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 370 size 25,4 total height 44,5mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437025](https://maedler.in/product/ball-transfer-unit-370-size-254-total-height-445mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437025/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 370 size 12,7 total height 22,2mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437013](https://maedler.in/product/ball-transfer-unit-370-size-127-total-height-222mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437013/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 370 size 12,7 total height 20mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65437012](https://maedler.in/product/ball-transfer-unit-370-size-127-total-height-20mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65437012/): Material: Housing: Steel, with KTL “Anti-Oxide” electrophoretic coating.  Ball cup: Steel, case hardened.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 368 size 38,1 housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65436838](https://maedler.in/product/ball-transfer-unit-368-size-381-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65436838/): Material: Housing: Steel, with KTL "Anti-Oxide" electrophoretic coating.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. * Bore size. Recommended bore tolerance: H9.Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 368 size 25,4 total height 44mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65436826](https://maedler.in/product/ball-transfer-unit-368-size-254-total-height-44mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65436826/): Material: Housing: Steel, with KTL "Anti-Oxide" electrophoretic coating.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. * Bore size. Recommended bore tolerance: H9.Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 368 size 25,4 total height 40mm housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65436825](https://maedler.in/product/ball-transfer-unit-368-size-254-total-height-40mm-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65436825/): Material: Housing: Steel, with KTL "Anti-Oxide" electrophoretic coating.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. * Bore size. Recommended bore tolerance: H9.Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 368 size 12,7 housing steel with KTL "anti-oxide" electrophoretic coating SKU: 65436812](https://maedler.in/product/ball-transfer-unit-368-size-127-housing-steel-with-ktl-anti-oxide-electrophoretic-coating-sku-65436812/): Material: Housing: Steel, with KTL "Anti-Oxide" electrophoretic coating.  Ball cup: Steel, case hardend.  Balls: Steel 100Cr6, hardened. Heavy duty ball transfer unit for high load. High shock resistance. Very low friction. Orientation: Anyway. From size 25.4 with felt seal. With drain hole. Conveying speed max. 2m/sec. Temperature range -30°C to +160°C. * Bore size. Recommended bore tolerance: H9.Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 367 size 45 stainless steel SKU: 65436745](https://maedler.in/product/ball-transfer-unit-367-size-45-stainless-steel-sku-65436745/): Material Type 367: Stainless steel 1.4021. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Ball transfer unit 367 size 30 stainless steel SKU: 65436730](https://maedler.in/product/ball-transfer-unit-367-size-30-stainless-steel-sku-65436730/): Material Type 367: Stainless steel 1.4021. Sizes dw 12 - 15 with pressed top cap made from sheet metal. Medium duty ball transfer unit for medium high load. Orientation: Ball up or horizontal. From size 22 with felt seal and drain hole. Can be used with fixing clip. Conveying speed max. 1,5m/sec. Temperature range -30°C to +100°C. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 9 teeth material steel teeth induction hardened SKU: 12188109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-9-teeth-material-steel-teeth-induction-hardened-sku-12188109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 8 teeth material steel teeth induction hardened SKU: 12188108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-8-teeth-material-steel-teeth-induction-hardened-sku-12188108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 06 B-2 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12183030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12183030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12183025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12183025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 30 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12183020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-30-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12183020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 25 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182516](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-25-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182516/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182316](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182316/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 23 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182315](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-23-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182315/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182116](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182116/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 21 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182115](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-21-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182115/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182016](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182016/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182015](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182015/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 20 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12182012](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-20-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12182012/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181920](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181920/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181916](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181916/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181915](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181915/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 19 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181912](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-19-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181912/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181820](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181820/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181815](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181815/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 18 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181812](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-18-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181812/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181720](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181720/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181715](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181715/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 17 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181712](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-17-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181712/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181620](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181620/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181615](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181615/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 16 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181612](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-16-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181612/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181516](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181516/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181515](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181515/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 15 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181514](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-15-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181514/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 19H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181419](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-19h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181419/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181416](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181416/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181415](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181415/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 14 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181414](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-14-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181414/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181315](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181315/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181314](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181314/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181312](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181312/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 13 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181310](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-13-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181310/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181216](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181216/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181215](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181215/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181214](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181214/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181212](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181212/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 12 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181210](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-12-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181210/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181115](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181115/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181114](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181114/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181112](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181112/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 06 B-2 11 teeth material steel bore 10H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12181110](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-06-b-2-11-teeth-material-steel-bore-10h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12181110/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 06 B-1 25 teeth material steel for taper-bush 1108 SKU: 12177425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-for-taper-bush-1108-sku-12177425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 23 teeth material steel for taper-bush 1108 SKU: 12177423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-for-taper-bush-1108-sku-12177423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 21 teeth material steel for taper-bush 1108 SKU: 12177421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-for-taper-bush-1108-sku-12177421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 20 teeth material steel for taper-bush 1108 SKU: 12177420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-for-taper-bush-1108-sku-12177420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 19 teeth material steel for taper-bush 1008 SKU: 12177419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-for-taper-bush-1008-sku-12177419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 06 B-1 18 teeth material steel for taper-bush 1008 SKU: 12177418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-for-taper-bush-1008-sku-12177418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 114 teeth material cast iron for taper bush type 1615 SKU: 12177188G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-114-teeth-material-cast-iron-for-taper-bush-type-1615-sku-12177188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 95 teeth material cast iron for taper bush type 1610 SKU: 12177183G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-95-teeth-material-cast-iron-for-taper-bush-type-1610-sku-12177183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 76 teeth material cast iron for taper bush type 1610 SKU: 12177176G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-76-teeth-material-cast-iron-for-taper-bush-type-1610-sku-12177176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 57 teeth material cast iron for taper bush type 1610 SKU: 12177157G](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-57-teeth-material-cast-iron-for-taper-bush-type-1610-sku-12177157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 45 teeth material steel for taper bush type 1610 SKU: 12177145](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-45-teeth-material-steel-for-taper-bush-type-1610-sku-12177145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 38 teeth material steel for taper bush type 1610 SKU: 12177138](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-38-teeth-material-steel-for-taper-bush-type-1610-sku-12177138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 30 teeth material steel for taper bush type 1210 SKU: 12177130](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-30-teeth-material-steel-for-taper-bush-type-1210-sku-12177130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 28 teeth material steel for taper bush type 1210 SKU: 12177128](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-28-teeth-material-steel-for-taper-bush-type-1210-sku-12177128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 27 teeth material steel for taper bush type 1210 SKU: 12177127](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-27-teeth-material-steel-for-taper-bush-type-1210-sku-12177127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 26 teeth material steel for taper bush type 1210 SKU: 12177126](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-26-teeth-material-steel-for-taper-bush-type-1210-sku-12177126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 25 teeth material steel for taper bush type 1210 SKU: 12177125](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-25-teeth-material-steel-for-taper-bush-type-1210-sku-12177125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 24 teeth material steel for taper bush type 1210 SKU: 12177124](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-24-teeth-material-steel-for-taper-bush-type-1210-sku-12177124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 23 teeth material steel for taper bush type 1210 SKU: 12177123](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-23-teeth-material-steel-for-taper-bush-type-1210-sku-12177123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 22 teeth material steel for taper bush type 1108 SKU: 12177122](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-22-teeth-material-steel-for-taper-bush-type-1108-sku-12177122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 21 teeth material steel for taper bush type 1008 SKU: 12177121](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-21-teeth-material-steel-for-taper-bush-type-1008-sku-12177121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 20 teeth material steel for taper bush type 1008 SKU: 12177120](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-20-teeth-material-steel-for-taper-bush-type-1008-sku-12177120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 19 teeth material steel for taper bush type 1008 SKU: 12177119](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-19-teeth-material-steel-for-taper-bush-type-1008-sku-12177119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 18 teeth material steel for taper bush type 1008 SKU: 12177118](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-18-teeth-material-steel-for-taper-bush-type-1008-sku-12177118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 06 B-2 3/8x7/32" 17 teeth material steel for taper bush type 1008 SKU: 12177117](https://maedler.in/product/double-strand-sprocket-zrt-06-b-2-3-8x7-32-17-teeth-material-steel-for-taper-bush-type-1008-sku-12177117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25.Prepared for Taper clamping bush. General dimensions: B1 = 5,3 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table.In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 06 B-1 25 teeth material steel SKU: 12142500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-sku-12142500/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 23 teeth material steel SKU: 12142300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-sku-12142300/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 21 teeth material steel SKU: 12142100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-sku-12142100/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 20 teeth material steel SKU: 12142000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-sku-12142000/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 19 teeth material steel SKU: 12141900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-sku-12141900/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 18 teeth material steel SKU: 12141800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-sku-12141800/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 17 teeth material steel SKU: 12141700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-17-teeth-material-steel-sku-12141700/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 16 teeth material steel SKU: 12141600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-16-teeth-material-steel-sku-12141600/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 15 teeth material steel SKU: 12141500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-15-teeth-material-steel-sku-12141500/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 06 B-1 14 teeth material steel SKU: 12141400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-06-b-1-14-teeth-material-steel-sku-12141400/): Material: Steel C45, not hardened. Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Grub screw DIN 6332 with thrust point with internal hexagon thread M6 length 30mm stainless steel SKU: 6549900601](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m6-length-30mm-stainless-steel-sku-6549900601/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M6 length 30mm stainless steel SKU: 6549900600](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m6-length-30mm-stainless-steel-sku-6549900600/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Ball-ended thrust screw stainless steel type B-N M16 x 50mm SKU: 65496650](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m16-x-50mm-sku-65496650/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M16 x 35mm SKU: 65496635](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m16-x-35mm-sku-65496635/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M16 x 25mm SKU: 65496625](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m16-x-25mm-sku-65496625/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M16 x 20mm SKU: 65496620](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m16-x-20mm-sku-65496620/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M12 x 40mm SKU: 65496240](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m12-x-40mm-sku-65496240/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M12 x 30mm SKU: 65496230](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m12-x-30mm-sku-65496230/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M12 x 20mm SKU: 65496220](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m12-x-20mm-sku-65496220/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M12 x 16mm SKU: 65496216](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m12-x-16mm-sku-65496216/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M10 x 35mm SKU: 65496035](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m10-x-35mm-sku-65496035/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M10 x 25mm SKU: 65496025](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m10-x-25mm-sku-65496025/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M10 x 16mm SKU: 65496016](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m10-x-16mm-sku-65496016/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M10 x 12mm SKU: 65496012](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m10-x-12mm-sku-65496012/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M8 x 30mm SKU: 65495830](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m8-x-30mm-sku-65495830/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M8 x 20mm SKU: 65495820](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m8-x-20mm-sku-65495820/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M8 x 12mm SKU: 65495812](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m8-x-12mm-sku-65495812/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M8 x 10mm SKU: 65495810](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m8-x-10mm-sku-65495810/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M6 x 25mm SKU: 65495625](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m6-x-25mm-sku-65495625/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M6 x 16mm SKU: 65495616](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m6-x-16mm-sku-65495616/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M6 x 10mm SKU: 65495610](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m6-x-10mm-sku-65495610/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M5 x 20mm SKU: 65495520](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m5-x-20mm-sku-65495520/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M5 x 12mm SKU: 65495512](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m5-x-12mm-sku-65495512/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M5 x 8mm SKU: 65495508](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m5-x-8mm-sku-65495508/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M4 x 16mm SKU: 65495416](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m4-x-16mm-sku-65495416/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M4 x 10mm SKU: 65495410](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m4-x-10mm-sku-65495410/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type B-N M4 x 6mm SKU: 65495406](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-b-n-m4-x-6mm-sku-65495406/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M16 x 50mm SKU: 65491650](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m16-x-50mm-sku-65491650/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M16 x 35mm SKU: 65491635](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m16-x-35mm-sku-65491635/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M16 x 25mm SKU: 65491625](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m16-x-25mm-sku-65491625/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M16 x 20mm SKU: 65491620](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m16-x-20mm-sku-65491620/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M12 x 40mm SKU: 65491240](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m12-x-40mm-sku-65491240/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M12 x 30mm SKU: 65491230](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m12-x-30mm-sku-65491230/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M12 x 20mm SKU: 65491220](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m12-x-20mm-sku-65491220/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M12 x 16mm SKU: 65491216](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m12-x-16mm-sku-65491216/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M10 x 35mm SKU: 65491035](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m10-x-35mm-sku-65491035/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M10 x 25mm SKU: 65491025](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m10-x-25mm-sku-65491025/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M10 x 16mm SKU: 65491016](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m10-x-16mm-sku-65491016/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M10 x 12mm SKU: 65491012](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m10-x-12mm-sku-65491012/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M8 x 30mm SKU: 65490830](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m8-x-30mm-sku-65490830/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M8 x 20mm SKU: 65490820](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m8-x-20mm-sku-65490820/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M8 x 12mm SKU: 65490812](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m8-x-12mm-sku-65490812/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M8 x 10mm SKU: 65490810](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m8-x-10mm-sku-65490810/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M6 x 25mm SKU: 65490625](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m6-x-25mm-sku-65490625/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M6 x 16mm SKU: 65490616](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m6-x-16mm-sku-65490616/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M6 x 10mm SKU: 65490610](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m6-x-10mm-sku-65490610/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M5 x 20mm SKU: 65490520](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m5-x-20mm-sku-65490520/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M5 x 12mm SKU: 65490512](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m5-x-12mm-sku-65490512/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M5 x 8mm SKU: 65490508](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m5-x-8mm-sku-65490508/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M4 x 16mm SKU: 65490416](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m4-x-16mm-sku-65490416/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M4 x 10mm SKU: 65490410](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m4-x-10mm-sku-65490410/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M4 x 6mm SKU: 65490406](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m4-x-6mm-sku-65490406/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M3 x 10mm SKU: 65490310](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m3-x-10mm-sku-65490310/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M3 x 8mm SKU: 65490308](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m3-x-8mm-sku-65490308/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw stainless steel type A-N M3 x 5mm SKU: 65490305](https://maedler.in/product/ball-ended-thrust-screw-stainless-steel-type-a-n-m3-x-5mm-sku-65490305/): Material: Screw: Stainless steel 1.4305 (AISI 303). Ball: Stainless steel, hardened. Type A-N: with full ball. Type B-N: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Thrust screw with brass bolt M10 x 18 steel strength 12.9 black oxide finished SKU: 65461018](https://maedler.in/product/thrust-screw-with-brass-bolt-m10-x-18-steel-strength-12-9-black-oxide-finished-sku-65461018/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Thrust screw with brass bolt M10 x 14 steel strength 12.9 black oxide finished SKU: 65461014](https://maedler.in/product/thrust-screw-with-brass-bolt-m10-x-14-steel-strength-12-9-black-oxide-finished-sku-65461014/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Thrust screw with brass bolt M8 x 22 steel strength 12.9 black oxide finished SKU: 65460822](https://maedler.in/product/thrust-screw-with-brass-bolt-m8-x-22-steel-strength-12-9-black-oxide-finished-sku-65460822/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Thrust screw with brass bolt M8 x 12 steel strength 12.9 black oxide finished SKU: 65460812](https://maedler.in/product/thrust-screw-with-brass-bolt-m8-x-12-steel-strength-12-9-black-oxide-finished-sku-65460812/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Thrust screw with brass bolt M6 x 17.5 steel strength 12.9 black oxide finished SKU: 65460617](https://maedler.in/product/thrust-screw-with-brass-bolt-m6-x-17-5-steel-strength-12-9-black-oxide-finished-sku-65460617/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Thrust screw with brass bolt M6 x 11.5 steel strength 12.9 black oxide finished SKU: 65460611](https://maedler.in/product/thrust-screw-with-brass-bolt-m6-x-11-5-steel-strength-12-9-black-oxide-finished-sku-65460611/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Thrust screw with brass bolt M5 x 12.5 steel strength 12.9 black oxide finished SKU: 65460512](https://maedler.in/product/thrust-screw-with-brass-bolt-m5-x-12-5-steel-strength-12-9-black-oxide-finished-sku-65460512/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Thrust screw with brass bolt M5 x 8.5 steel strength 12.9 black oxide finished SKU: 65460508](https://maedler.in/product/thrust-screw-with-brass-bolt-m5-x-8-5-steel-strength-12-9-black-oxide-finished-sku-65460508/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Thrust screw with brass bolt M4 x 10.5 steel strength 12.9 black oxide finished SKU: 65460410](https://maedler.in/product/thrust-screw-with-brass-bolt-m4-x-10-5-steel-strength-12-9-black-oxide-finished-sku-65460410/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Thrust screw with brass bolt M4 x 6.5 steel strength 12.9 black oxide finished SKU: 65460406](https://maedler.in/product/thrust-screw-with-brass-bolt-m4-x-6-5-steel-strength-12-9-black-oxide-finished-sku-65460406/): Material: Screw: Tensile strength 12.9, black oxide finish. Bolt: Brass Note: Brass bolt press-fitted. Used for gentle pressing-in or clamping of threaded spindles, axles, shafts and surface treated parts. Temperature range: -60°C to +350°C. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M20 x 60mm long SKU: 65457060](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m20-x-60mm-long-sku-65457060/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M20 x 50mm long SKU: 65457050](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m20-x-50mm-long-sku-65457050/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M20 x 40mm long SKU: 65457040](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m20-x-40mm-long-sku-65457040/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M20 x 30mm long SKU: 65457030](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m20-x-30mm-long-sku-65457030/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M16 x 50mm long SKU: 65456650](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m16-x-50mm-long-sku-65456650/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M16 x 35mm long SKU: 65456635](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m16-x-35mm-long-sku-65456635/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M16 x 25mm long SKU: 65456625](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m16-x-25mm-long-sku-65456625/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M16 x 20mm long SKU: 65456620](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m16-x-20mm-long-sku-65456620/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M12 x 40mm long SKU: 65456240](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m12-x-40mm-long-sku-65456240/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M12 x 30mm long SKU: 65456230](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m12-x-30mm-long-sku-65456230/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M12 x 20mm long SKU: 65456220](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m12-x-20mm-long-sku-65456220/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M12 x 16mm long SKU: 65456216](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m12-x-16mm-long-sku-65456216/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M10 x 35mm long SKU: 65456035](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m10-x-35mm-long-sku-65456035/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M10 x 25mm long SKU: 65456025](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m10-x-25mm-long-sku-65456025/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M10 x 16mm long SKU: 65456016](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m10-x-16mm-long-sku-65456016/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M10 x 12mm long SKU: 65456012](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m10-x-12mm-long-sku-65456012/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M8 x 30mm long SKU: 65455830](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m8-x-30mm-long-sku-65455830/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M8 x 20mm long SKU: 65455820](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m8-x-20mm-long-sku-65455820/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M8 x 12mm long SKU: 65455812](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m8-x-12mm-long-sku-65455812/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M8 x 10mm long SKU: 65455810](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m8-x-10mm-long-sku-65455810/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M6 x 25mm long SKU: 65455625](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m6-x-25mm-long-sku-65455625/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M6 x 16mm long SKU: 65455616](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m6-x-16mm-long-sku-65455616/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M6 x 10mm long SKU: 65455610](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m6-x-10mm-long-sku-65455610/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M5 x 20mm long SKU: 65455520](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m5-x-20mm-long-sku-65455520/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M5 x 12mm long SKU: 65455512](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m5-x-12mm-long-sku-65455512/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M5 x 8mm long SKU: 65455508](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m5-x-8mm-long-sku-65455508/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M4 x 16mm long SKU: 65455416](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m4-x-16mm-long-sku-65455416/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M4 x 10mm long SKU: 65455410](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m4-x-10mm-long-sku-65455410/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type B M4 x 6mm long SKU: 65455406](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-b-m4-x-6mm-long-sku-65455406/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M20 x 60mm long SKU: 65452060](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m20-x-60mm-long-sku-65452060/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M20 x 50mm long SKU: 65452050](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m20-x-50mm-long-sku-65452050/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M20 x 40mm long SKU: 65452040](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m20-x-40mm-long-sku-65452040/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M20 x 30mm long SKU: 65452030](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m20-x-30mm-long-sku-65452030/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M16 x 50mm long SKU: 65451650](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m16-x-50mm-long-sku-65451650/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Ball-ended thrust screw steel 12.9 black oxide finished type A M16 x 35mm long SKU: 65451635](https://maedler.in/product/ball-ended-thrust-screw-steel-12-9-black-oxide-finished-type-a-m16-x-35mm-long-sku-65451635/): Material: Screw: Steel tensile strength 12.9, black oxide finish. Ball: Steel, hardened, bright. Type A: with full ball. Type B: with flat-faced ball, to clamp surfaces that are not exactly parallel. Temperature range: -60ºC to +350ºC. - [Elastic coupling RNK with clamp hubs backlash-free size 24 boreholes 19mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60542419](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-24-boreholes-19mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60542419/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 24 boreholes 16mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60542416](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-24-boreholes-16mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60542416/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 24 prebore 5mm (no H7) outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60542405](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-24-prebore-5mm-no-h7-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60542405/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 19 boreholes 19mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60541919](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-19-boreholes-19mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60541919/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 19 boreholes 16mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60541916](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-19-boreholes-16mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60541916/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 19 boreholes 14mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60541914](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-19-boreholes-14mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60541914/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 19 prebore 5mm (no H7) outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60541905](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-19-prebore-5mm-no-h7-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60541905/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 14 boreholes 16mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60541416](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-14-boreholes-16mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60541416/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 14 boreholes 14mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60541414](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-14-boreholes-14mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60541414/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 14 boreholes 11mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60541411](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-14-boreholes-11mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60541411/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 14 prebore 3mm (no H7) outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60541403](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-14-prebore-3mm-no-h7-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60541403/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 9 boreholes 11mm outer diameter 20mm overall length 30mm insert 92° shore yellow or white SKU: 60540911](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-9-boreholes-11mm-outer-diameter-20mm-overall-length-30mm-insert-92-shore-yellow-or-white-sku-60540911/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 9 boreholes 10mm outer diameter 20mm overall length 30mm insert 92° shore yellow or white SKU: 60540910](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-9-boreholes-10mm-outer-diameter-20mm-overall-length-30mm-insert-92-shore-yellow-or-white-sku-60540910/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 9 boreholes 9mm outer diameter 20mm overall length 30mm insert 92° shore yellow or white SKU: 60540909](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-9-boreholes-9mm-outer-diameter-20mm-overall-length-30mm-insert-92-shore-yellow-or-white-sku-60540909/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 9 prebore 3mm (no H7) outer diameter 20mm overall length 30mm insert 92° shore yellow or white SKU: 60540903](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-9-prebore-3mm-no-h7-outer-diameter-20mm-overall-length-30mm-insert-92-shore-yellow-or-white-sku-60540903/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 7 boreholes 6mm outer diameter 14mm overall length 22mm insert 92° shore yellow or white SKU: 60540706](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-7-boreholes-6mm-outer-diameter-14mm-overall-length-22mm-insert-92-shore-yellow-or-white-sku-60540706/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 7 max. torque 0.95Nm boreholes 5mm outer diameter 14mm overall length 22mm insert 92° shore yellow or white SKU: 60540705](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-7-max-torque-0-95nm-boreholes-5mm-outer-diameter-14mm-overall-length-22mm-insert-92-shore-yellow-or-white-sku-60540705/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 7 max. torque 0.95Nm prebore 3mm (no H7) outer diameter 14mm overall length 22mm insert 92° shore yellow or white SKU: 60540703](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-7-max-torque-0-95nm-prebore-3mm-no-h7-outer-diameter-14mm-overall-length-22mm-insert-92-shore-yellow-or-white-sku-60540/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 5 boreholes 4mm outer diameter 10mm overall length 15mm insert 92° shore yellow or white SKU: 60540504](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-5-boreholes-4mm-outer-diameter-10mm-overall-length-15mm-insert-92-shore-yellow-or-white-sku-60540504/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 5 boreholes 3mm outer diameter 10mm overall length 15mm insert 92° shore yellow or white SKU: 60540503](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-5-boreholes-3mm-outer-diameter-10mm-overall-length-15mm-insert-92-shore-yellow-or-white-sku-60540503/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 5 prebore 1mm (no H7) outer diameter 10mm overall length 15mm insert 92° shore yellow or white SKU: 60540501](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-5-prebore-1mm-no-h7-outer-diameter-10mm-overall-length-15mm-insert-92-shore-yellow-or-white-sku-60540501/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNG cast iron size 100 max. torque 66000Nm nominal torque 3300Nm outer diameter 225mm length 270mm pre-bored 29mm SKU: 60531100](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-100-max-torque-66000nm-nominal-torque-3300nm-outer-diameter-225mm-length-270mm-pre-bored-29mm-sku-60531100/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 90 max. torque 4800Nm nominal torque 2400Nm outer diameter 200mm length 245mm pre-bored 29mm SKU: 60531000](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-90-max-torque-4800nm-nominal-torque-2400nm-outer-diameter-200mm-length-245mm-pre-bored-29mm-sku-60531000/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 75 max. torque 2560Nm nominal torque 1280Nm outer diameter 160mm length 210mm pre-bored 25mm SKU: 60530900](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-75-max-torque-2560nm-nominal-torque-1280nm-outer-diameter-160mm-length-210mm-pre-bored-25mm-sku-60530900/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 65 max. torque 1250Nm nominal torque 625Nm outer diameter 135mm length 185mm pre-bored 18mm SKU: 60530800](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-65-max-torque-1250nm-nominal-torque-625nm-outer-diameter-135mm-length-185mm-pre-bored-18mm-sku-60530800/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 55 max. torque 820Nm nominal torque 410Nm outer diameter 120mm length 160mm pre-bored 16mm SKU: 60530700](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-55-max-torque-820nm-nominal-torque-410nm-outer-diameter-120mm-length-160mm-pre-bored-16mm-sku-60530700/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 48 max. torque 620Nm nominal torque 310Nm outer diameter 105mm length 140mm pre-bored 16mm SKU: 60530500](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-48-max-torque-620nm-nominal-torque-310nm-outer-diameter-105mm-length-140mm-pre-bored-16mm-sku-60530500/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 42 max. torque 530Nm nominal torque 265Nm outer diameter 95mm length 126mm pre-bored 13mm SKU: 60530400](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-42-max-torque-530nm-nominal-torque-265nm-outer-diameter-95mm-length-126mm-pre-bored-13mm-sku-60530400/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 38 max. torque 380Nm nominal torque 190Nm outer diameter 80mm length 114mm pre-bored 13mm SKU: 60530300](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-38-max-torque-380nm-nominal-torque-190nm-outer-diameter-80mm-length-114mm-pre-bored-13mm-sku-60530300/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 28 max. torque 190Nm nominal torque 95Nm outer diameter 65mm length 90mm pre-bored 9mm SKU: 60530200](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-28-max-torque-190nm-nominal-torque-95nm-outer-diameter-65mm-length-90mm-pre-bored-9mm-sku-60530200/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 24 max. torque 70Nm nominal torque 35Nm outer diameter 55mm length 78mm pre-bored 7mm SKU: 60530100](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-24-max-torque-70nm-nominal-torque-35nm-outer-diameter-55mm-length-78mm-pre-bored-7mm-sku-60530100/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling RNG cast iron size 19 max. torque 20Nm nominal torque 10Nm outer diameter 40mm length 66mm pre-bored 5mm SKU: 60530000](https://maedler.in/product/elastic-coupling-rng-cast-iron-size-19-max-torque-20nm-nominal-torque-10nm-outer-diameter-40mm-length-66mm-pre-bored-5mm-sku-60530000/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Spider (insert): Polyurethane, Shore hardness 92ºA (yellow). Spare part spiders available in 92°A (yellow), 98°A (red) or 64°D (green). Couplings are pre-bored ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40ºC to +90ºC. - [Elastic coupling hub RNT size 90 type AS for taper bush 3020 SKU: 60520902](https://maedler.in/product/elastic-coupling-hub-rnt-size-90-type-as-for-taper-bush-3020-sku-60520902/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 90 type IS for taper bush 3020 SKU: 60520901](https://maedler.in/product/elastic-coupling-hub-rnt-size-90-type-is-for-taper-bush-3020-sku-60520901/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 75 type AS for taper bush 2517 SKU: 60520802](https://maedler.in/product/elastic-coupling-hub-rnt-size-75-type-as-for-taper-bush-2517-sku-60520802/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 75 type IS for taper bush 2517 SKU: 60520801](https://maedler.in/product/elastic-coupling-hub-rnt-size-75-type-is-for-taper-bush-2517-sku-60520801/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 65 type AS for taper bush 2012 SKU: 60520702](https://maedler.in/product/elastic-coupling-hub-rnt-size-65-type-as-for-taper-bush-2012-sku-60520702/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 65 type IS for taper bush 2012 SKU: 60520701](https://maedler.in/product/elastic-coupling-hub-rnt-size-65-type-is-for-taper-bush-2012-sku-60520701/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 55 type AS for taper bush 2012 SKU: 60520602](https://maedler.in/product/elastic-coupling-hub-rnt-size-55-type-as-for-taper-bush-2012-sku-60520602/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 55 type IS for taper bush 2012 SKU: 60520601](https://maedler.in/product/elastic-coupling-hub-rnt-size-55-type-is-for-taper-bush-2012-sku-60520601/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 48 type AS for taper bush 1615 SKU: 60520502](https://maedler.in/product/elastic-coupling-hub-rnt-size-48-type-as-for-taper-bush-1615-sku-60520502/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 48 type IS for taper bush 1615 SKU: 60520501](https://maedler.in/product/elastic-coupling-hub-rnt-size-48-type-is-for-taper-bush-1615-sku-60520501/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 48 max. torque 620Nm nominal torque 310Nm outer diameter 105 mm overall length 140 mm with pilot bore insert 92° shore yellow SKU: 60520500](https://maedler.in/product/elastic-coupling-rn-size-48-max-torque-620nm-nominal-torque-310nm-outer-diameter-105-mm-overall-length-140-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520500/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling hub RNT size 42 type AS for taper bush 1610 SKU: 60520402](https://maedler.in/product/elastic-coupling-hub-rnt-size-42-type-as-for-taper-bush-1610-sku-60520402/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 42 type IS for taper bush 1610 SKU: 60520401](https://maedler.in/product/elastic-coupling-hub-rnt-size-42-type-is-for-taper-bush-1610-sku-60520401/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 42 max. torque 530Nm nominal torque 265Nm outer diameter 95 mm overall length 126 mm with pilot bore insert 92° shore yellow SKU: 60520400](https://maedler.in/product/elastic-coupling-rn-size-42-max-torque-530nm-nominal-torque-265nm-outer-diameter-95-mm-overall-length-126-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520400/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling hub RNT size 38 type AS for taper bush 1108 SKU: 60520302](https://maedler.in/product/elastic-coupling-hub-rnt-size-38-type-as-for-taper-bush-1108-sku-60520302/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 38 type IS for taper bush 1108 SKU: 60520301](https://maedler.in/product/elastic-coupling-hub-rnt-size-38-type-is-for-taper-bush-1108-sku-60520301/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 38 max. torque 380Nm nominal torque 190Nm outer diameter 80 mm overall length 114 mm with pilot bore insert 92° shore yellow SKU: 60520300](https://maedler.in/product/elastic-coupling-rn-size-38-max-torque-380nm-nominal-torque-190nm-outer-diameter-80-mm-overall-length-114-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520300/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling hub RNT size 28 type AS for taper bush 1108 SKU: 60520202](https://maedler.in/product/elastic-coupling-hub-rnt-size-28-type-as-for-taper-bush-1108-sku-60520202/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 28 type IS for taper bush 1108 SKU: 60520201](https://maedler.in/product/elastic-coupling-hub-rnt-size-28-type-is-for-taper-bush-1108-sku-60520201/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 28 max. torque 190Nm nominal torque 95Nm outer diameter 65mm overall length 90 mm with pilot bore insert 92° shore yellow SKU: 60520200](https://maedler.in/product/elastic-coupling-rn-size-28-max-torque-190nm-nominal-torque-95nm-outer-diameter-65mm-overall-length-90-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520200/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling hub RNT size 24 type AS for taper bush 1008 SKU: 60520102](https://maedler.in/product/elastic-coupling-hub-rnt-size-24-type-as-for-taper-bush-1008-sku-60520102/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling hub RNT size 24 type IS for taper bush 1008 SKU: 60520101](https://maedler.in/product/elastic-coupling-hub-rnt-size-24-type-is-for-taper-bush-1008-sku-60520101/): Material: Coupling hubs: Grey cast iron GG25 (GJL-250). Spider: Polyurethane, Shore hardness either 92°A or 98°A. Two coupling hubs combined with one spider and two taper bushes make up a ready-to-install elastic coupling. All components have to be ordered separately. This means accessibility (mounting from the inside or outside) and various bore diameters can be chosen. Temperature range: -20°C to +80°C. Design IS: Mounting of bush from inside. Design AS: Mounting of bush from outside. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Elastic coupling RN size 24 max. torque 70Nm nominal torque 35 Nm outer diameter 55 mm overall length 78 mm with pilot bore insert 92° shore yellow SKU: 60520100](https://maedler.in/product/elastic-coupling-rn-size-24-max-torque-70nm-nominal-torque-35-nm-outer-diameter-55-mm-overall-length-78-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520100/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling RN size 19 max. torque 20Nm nominal torque 10 Nm outer diameter 40 mm overall length 66 mm with pilot bore insert 92° shore yellow SKU: 60520000](https://maedler.in/product/elastic-coupling-rn-size-19-max-torque-20nm-nominal-torque-10-nm-outer-diameter-40-mm-overall-length-66-mm-with-pilot-bore-insert-92-shore-yellow-sku-60520000/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 14mm width 5mm sealed on both sides SKU: 605-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-14mm-width-5mm-sealed-on-both-sides-sku-605-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Elastic coupling RN size 14 max. torque 15Nm nominal torque 7.5 Nm outer diameter 30 mm overall length 35 mm no bore insert 92° shore yellow SKU: 60519900](https://maedler.in/product/elastic-coupling-rn-size-14-max-torque-15nm-nominal-torque-7-5-nm-outer-diameter-30-mm-overall-length-35-mm-no-bore-insert-92-shore-yellow-sku-60519900/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling RN size 9 max. torque 6Nm nominal torque 2,93 Nm outer diameter 20 mm overall length 30 mm no bore insert 92° shore white or yellow SKU: 60519800](https://maedler.in/product/elastic-coupling-rn-size-9-max-torque-6nm-nominal-torque-293-nm-outer-diameter-20-mm-overall-length-30-mm-no-bore-insert-92-shore-white-or-yellow-sku-60519800/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [Elastic coupling RN size 7 max. torque 2,24Nm nominal torque 1,12Nm outer diameter 14 mm overall length 22 mm no bore insert 92° shore white or yellow SKU: 60519700](https://maedler.in/product/elastic-coupling-rn-size-7-max-torque-224nm-nominal-torque-112nm-outer-diameter-14-mm-overall-length-22-mm-no-bore-insert-92-shore-white-or-yellow-sku-60519700/): Material: Hubs made from aluminium, spider (elastic insert) made from polyurethane, Shore hardness 92°A, yellow. Spare part spiders available in Shore hardness 92°A, 98°A and 64°D. Couplings are available undrilled or pre-drilled ex stock. Customized bores and feather-key grooves available at extra charge. Temperature range: -40°C to +90°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. 1) Weights refer to max. customized bore without keyways. - [MAEDLER deep groove ball bearing single row inner diameter 5mm outer diameter 14mm width 5mm shielded on both sides SKU: 605-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-5mm-outer-diameter-14mm-width-5mm-shielded-on-both-sides-sku-605-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 4mm outer diameter 12mm width 4mm sealed on both sides SKU: 604-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-4mm-outer-diameter-12mm-width-4mm-sealed-on-both-sides-sku-604-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Elastic coupling DXA size 100 max. torque 11000Nm nominal torque 5500Nm outer diameter 220mm overall length 250mm with pilot bore SKU: 60410001](https://maedler.in/product/elastic-coupling-dxa-size-100-max-torque-11000nm-nominal-torque-5500nm-outer-diameter-220mm-overall-length-250mm-with-pilot-bore-sku-60410001/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 85 max. torque 6700Nm nominal torque 3350Nm outer diameter 185mm overall length 214mm with pilot bore SKU: 60408501](https://maedler.in/product/elastic-coupling-dxa-size-85-max-torque-6700nm-nominal-torque-3350nm-outer-diameter-185mm-overall-length-214mm-with-pilot-bore-sku-60408501/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 75 max. torque 4900Nm nominal torque 2450Nm outer diameter 165mm overall length 190mm with pilot bore SKU: 60407501](https://maedler.in/product/elastic-coupling-dxa-size-75-max-torque-4900nm-nominal-torque-2450nm-outer-diameter-165mm-overall-length-190mm-with-pilot-bore-sku-60407501/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 65 max. torque 3200Nm nominal torque 1600Nm outer diameter 142mm overall length 165mm with pilot bore SKU: 60406501](https://maedler.in/product/elastic-coupling-dxa-size-65-max-torque-3200nm-nominal-torque-1600nm-outer-diameter-142mm-overall-length-165mm-with-pilot-bore-sku-60406501/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 60 max. torque 2300Nm nominal torque 1150Nm outer diameter 130mm overall length 152mm with pilot bore SKU: 60406001](https://maedler.in/product/elastic-coupling-dxa-size-60-max-torque-2300nm-nominal-torque-1150nm-outer-diameter-130mm-overall-length-152mm-with-pilot-bore-sku-60406001/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 55 max. torque 1760Nm nominal torque 880Nm outer diameter 120mm overall length 140mm with pilot bore SKU: 60405501](https://maedler.in/product/elastic-coupling-dxa-size-55-max-torque-1760nm-nominal-torque-880nm-outer-diameter-120mm-overall-length-140mm-with-pilot-bore-sku-60405501/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 48 max. torque 1300Nm nominal torque 650Nm outer diameter 105mm overall length 124mm with pilot bore SKU: 60404801](https://maedler.in/product/elastic-coupling-dxa-size-48-max-torque-1300nm-nominal-torque-650nm-outer-diameter-105mm-overall-length-124mm-with-pilot-bore-sku-60404801/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 42 max. torque 920Nm nominal torque 460Nm outer diameter 92mm overall length 110mm with pilot bore SKU: 60404201](https://maedler.in/product/elastic-coupling-dxa-size-42-max-torque-920nm-nominal-torque-460nm-outer-diameter-92mm-overall-length-110mm-with-pilot-bore-sku-60404201/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 38 max. torque 640Nm nominal torque 325Nm outer diameter 84mm overall length 100mm with pilot bore SKU: 60403801](https://maedler.in/product/elastic-coupling-dxa-size-38-max-torque-640nm-nominal-torque-325nm-outer-diameter-84mm-overall-length-100mm-with-pilot-bore-sku-60403801/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 32 max. torque 340Nm nominal torque 170Nm outer diameter 70mm overall length 86mm with pilot bore SKU: 60403201](https://maedler.in/product/elastic-coupling-dxa-size-32-max-torque-340nm-nominal-torque-170nm-outer-diameter-70mm-overall-length-86mm-with-pilot-bore-sku-60403201/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DXA size 28 max. torque 240Nm nominal torque 120Nm outer diameter 62mm overall length 76mm no bore SKU: 60402801](https://maedler.in/product/elastic-coupling-dxa-size-28-max-torque-240nm-nominal-torque-120nm-outer-diameter-62mm-overall-length-76mm-no-bore-sku-60402801/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [Elastic coupling DX size 24 max. torque 160Nm nominal torque 80Nm outer diameter 55mm overall length66 mm no bore SKU: 60402401](https://maedler.in/product/elastic-coupling-dx-size-24-max-torque-160nm-nominal-torque-80nm-outer-diameter-55mm-overall-length66-mm-no-bore-sku-60402401/): Material: Up to size 28: Hubs made from Aluminium. From size 32: Hubs made from grey cast iron GG25. Insert made from Polyurethane, shore hardness 92º A, white. Insertable elastic coupling, for high torques. Not backlash-free. Does not transfer any axial forces. Robust component for relatively large shaft offset. Particularly suitable for large radial offset. Improved version. Special tooth profile and machined claws result in longer lifetime. Temperature range: -20ºC to +80ºC. Couplings are available pre-drilled ex stock.Customized bores and feather-key grooves available at extra charge. 1) At mounting, the distance between the hubs must be measure E to allow the max. shaft misalignment. - [MAEDLER deep groove ball bearing single row inner diameter 4mm outer diameter 12mm width 4mm shielded on both sides SKU: 604-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-4mm-outer-diameter-12mm-width-4mm-shielded-on-both-sides-sku-604-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Elastic coupling PU both sides bore 14mm hubs made from stainless steel SKU: 60399210](https://maedler.in/product/elastic-coupling-pu-both-sides-bore-14mm-hubs-made-from-stainless-steel-sku-60399210/): Material: polyester, hubs either zinc-plated steel or stainless steel 1.4305. These torsionally-stiff couplings made in one-part from flexible plastic are easily mounted. They show very good chemical resistance against acids, bases, solvents, greases and oils. They have a very high tear resistance, are highly flexible at low temperatures, have good shock and vibration damping properties and are corrosion resistant. Max. speed: 3.000 tr/min. Temperature range: -40°C to +100°C. 1)max. torque at max. shaft misalignment 2) max. torque at a shaft misalignment of 1° Angular, 2 mm axial and 0,5 mm radial. - [Elastic coupling PU both sides bore 12mm hubs made from stainless steel SKU: 60399205](https://maedler.in/product/elastic-coupling-pu-both-sides-bore-12mm-hubs-made-from-stainless-steel-sku-60399205/): Material: polyester, hubs either zinc-plated steel or stainless steel 1.4305. These torsionally-stiff couplings made in one-part from flexible plastic are easily mounted. They show very good chemical resistance against acids, bases, solvents, greases and oils. They have a very high tear resistance, are highly flexible at low temperatures, have good shock and vibration damping properties and are corrosion resistant. Max. speed: 3.000 tr/min. Temperature range: -40°C to +100°C. 1)max. torque at max. shaft misalignment 2) max. torque at a shaft misalignment of 1° Angular, 2 mm axial and 0,5 mm radial. - [Elastic coupling PU both sides bore 6mm hubs made from stainless steel SKU: 60399201](https://maedler.in/product/elastic-coupling-pu-both-sides-bore-6mm-hubs-made-from-stainless-steel-sku-60399201/): Material: polyester, hubs either zinc-plated steel or stainless steel 1.4305. These torsionally-stiff couplings made in one-part from flexible plastic are easily mounted. They show very good chemical resistance against acids, bases, solvents, greases and oils. They have a very high tear resistance, are highly flexible at low temperatures, have good shock and vibration damping properties and are corrosion resistant. Max. speed: 3.000 tr/min. Temperature range: -40°C to +100°C. 1)max. torque at max. shaft misalignment 2) max. torque at a shaft misalignment of 1° Angular, 2 mm axial and 0,5 mm radial. - [Beam coupling LA made from stainless steel max. torque 102Nm overall length 130.00 outer diameter 57.15mm both sides bore 30mm SKU: 60299868](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-102nm-overall-length-130-00-outer-diameter-57-15mm-both-sides-bore-30mm-sku-60299868/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 102Nm overall length 130.00 outer diameter 57.15mm both sides bore 24mm SKU: 60299866](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-102nm-overall-length-130-00-outer-diameter-57-15mm-both-sides-bore-24mm-sku-60299866/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 73Nm overall length 95.30mm outer diameter 50.8mm both sides bore 24mm SKU: 60299862](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-73nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-24mm-sku-60299862/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 73Nm overall length 95.30mm outer diameter 50.8mm both sides bore 19mm SKU: 60299860](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-73nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-19mm-sku-60299860/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 37 Nm overall length 95.30mm outer diameter 50.8mm both sides bore 16mm SKU: 60299858](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-37-nm-overall-length-95-30mm-outer-diameter-50-8mm-both-sides-bore-16mm-sku-60299858/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 48Nm overall length 76.20mm outer diameter 44.45mm both sides bore 19mm SKU: 60299856](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-48nm-overall-length-76-20mm-outer-diameter-44-45mm-both-sides-bore-19mm-sku-60299856/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 48Nm overall length 76.20mm outer diameter 44.45mm both sides bore 16mm SKU: 60299854](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-48nm-overall-length-76-20mm-outer-diameter-44-45mm-both-sides-bore-16mm-sku-60299854/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 36Nm overall length 66.67mm outer diameter 38.1mm both sides bore 19mm SKU: 60299850](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-36nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-19mm-sku-60299850/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 36Nm overall length 66.67mm outer diameter 38.1mm both sides bore 16mm SKU: 60299848](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-36nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-16mm-sku-60299848/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 36Nm overall length 66.67mm outer diameter 38.1mm both sides bore 12mm SKU: 60299846](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-36nm-overall-length-66-67mm-outer-diameter-38-1mm-both-sides-bore-12mm-sku-60299846/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 25Nm overall length 57.15mm outer diameter 31.75mm both sides bore 16mm SKU: 60299844](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-25nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-16mm-sku-60299844/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 25Nm overall length 57.15mm outer diameter 31.75mm both sides bore 12mm SKU: 60299842](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-25nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-12mm-sku-60299842/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 25Nm overall length 57.15mm outer diameter 31.75mm both sides bore 10mm SKU: 60299840](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-25nm-overall-length-57-15mm-outer-diameter-31-75mm-both-sides-bore-10mm-sku-60299840/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 16Nm overall length 38.10mm outer diameter 25.40mm both sides bore 10mm SKU: 60299838](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-16nm-overall-length-38-10mm-outer-diameter-25-40mm-both-sides-bore-10mm-sku-60299838/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 16Nm overall length 38.10mm outer diameter 25.40mm both sides bore 8mm SKU: 60299836](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-16nm-overall-length-38-10mm-outer-diameter-25-40mm-both-sides-bore-8mm-sku-60299836/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 10 Nm overall length 38.10mm outer diameter 25.40mm both sides bore 6mm SKU: 60299834](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-10-nm-overall-length-38-10mm-outer-diameter-25-40mm-both-sides-bore-6mm-sku-60299834/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 8Nm overall length 28.00mm outer diameter 19.05mm both sides bore 8mm SKU: 60299832](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-8nm-overall-length-28-00mm-outer-diameter-19-05mm-both-sides-bore-8mm-sku-60299832/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 4.8 Nm overall length 28.00mm outer diameter 19.05mm both sides bore 6mm SKU: 60299830](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-4-8-nm-overall-length-28-00mm-outer-diameter-19-05mm-both-sides-bore-6mm-sku-60299830/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 5Nm overall length 25.40mm outer diameter 15.87mm both sides bore 6mm SKU: 60299820](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-5nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-6mm-sku-60299820/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 3.4 Nm overall length 25.40mm outer diameter 15.87mm both sides bore 5mm SKU: 60299818](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-3-4-nm-overall-length-25-40mm-outer-diameter-15-87mm-both-sides-bore-5mm-sku-60299818/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 3Nm overall length 25.40mm outer diameter 12.7mm both sides bore 6mm SKU: 60299814](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-3nm-overall-length-25-40mm-outer-diameter-12-7mm-both-sides-bore-6mm-sku-60299814/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Beam coupling LA made from stainless steel max. torque 1.9 Nm overall length 25.40mm outer diameter 12.7mm both sides bore 4mm SKU: 60299812](https://maedler.in/product/beam-coupling-la-made-from-stainless-steel-max-torque-1-9-nm-overall-length-25-40mm-outer-diameter-12-7mm-both-sides-bore-4mm-sku-60299812/): Material: 1.4305 (AISI 303). - torsionally rigid design. - zero backlash. - perfect transmission of torque. - very low restoring force. * Please regard the operating factors. See PDF-catalog pages. ** Shaft must not pushed in any further. 1) Against surcharge. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 9mm outer diameter 25mm length 18mm SKU: 60561209](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-9mm-outer-diameter-25mm-length-18mm-sku-60561209/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 8mm outer diameter 25mm length 18mm SKU: 60561208](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-8mm-outer-diameter-25mm-length-18mm-sku-60561208/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 6mm outer diameter 25mm length 18mm SKU: 60561206](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-6mm-outer-diameter-25mm-length-18mm-sku-60561206/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 5mm outer diameter 25mm length 18mm SKU: 60561205](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-5mm-outer-diameter-25mm-length-18mm-sku-60561205/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 11mm outer diameter 20mm length 16mm SKU: 60560911](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-11mm-outer-diameter-20mm-length-16mm-sku-60560911/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 10mm outer diameter 20mm length 16mm SKU: 60560910](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-10mm-outer-diameter-20mm-length-16mm-sku-60560910/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 9mm outer diameter 20mm length 16mm SKU: 60560909](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-9mm-outer-diameter-20mm-length-16mm-sku-60560909/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 8mm outer diameter 20mm length 16mm SKU: 60560908](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-8mm-outer-diameter-20mm-length-16mm-sku-60560908/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 6mm outer diameter 20mm length 16mm SKU: 60560906](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-6mm-outer-diameter-20mm-length-16mm-sku-60560906/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 5mm outer diameter 20mm length 16mm SKU: 60560905](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-5mm-outer-diameter-20mm-length-16mm-sku-60560905/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 9 borehole 4mm outer diameter 20mm length 16mm SKU: 60560904](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-9-borehole-4mm-outer-diameter-20mm-length-16mm-sku-60560904/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 7 borehole 6mm outer diameter 14mm length 12mm SKU: 60560706](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-7-borehole-6mm-outer-diameter-14mm-length-12mm-sku-60560706/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 7 borehole 5mm outer diameter 14mm length 12mm SKU: 60560705](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-7-borehole-5mm-outer-diameter-14mm-length-12mm-sku-60560705/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 7 borehole 4mm outer diameter 14mm length 12mm SKU: 60560704](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-7-borehole-4mm-outer-diameter-14mm-length-12mm-sku-60560704/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 280 max. torque 10000Nm nominal torque 3900Nm outer diameter 280mm Länge 223mm pre-bored 52mm SKU: 60560313](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-280-max-torque-10000nm-nominal-torque-3900nm-outer-diameter-280mm-lange-223mm-pre-bored-52mm-sku-60560313/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 250 max. torque 8400Nm nominal torque 2800Nm outer diameter 250mm Länge 203mm pre-bored 44mm SKU: 60560312](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-250-max-torque-8400nm-nominal-torque-2800nm-outer-diameter-250mm-lange-203mm-pre-bored-44mm-sku-60560312/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 225 max. torque 6000Nm nominal torque 2000Nm outer diameter 225mm Länge 182mm no bore SKU: 60560311](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-225-max-torque-6000nm-nominal-torque-2000nm-outer-diameter-225mm-lange-182mm-no-bore-sku-60560311/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 200 max. torque 4020Nm nominal torque 1340Nm outer diameter 200mm Länge 162mm no bore SKU: 60560310](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-200-max-torque-4020nm-nominal-torque-1340nm-outer-diameter-200mm-lange-162mm-no-bore-sku-60560310/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 180 max. torque 2640Nm nominal torque 880Nm outer diameter 180mm Länge 142mm no bore SKU: 60560309](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-180-max-torque-2640nm-nominal-torque-880nm-outer-diameter-180mm-lange-142mm-no-bore-sku-60560309/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 160 max. torque 1680Nm nominal torque 560Nm outer diameter 160mm Länge 122mm no bore SKU: 60560308](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-160-max-torque-1680nm-nominal-torque-560nm-outer-diameter-160mm-lange-122mm-no-bore-sku-60560308/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 140 max. torque 1080Nm nominal torque 360Nm outer diameter 140mm Länge 112mm no bore SKU: 60560307](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-140-max-torque-1080nm-nominal-torque-360nm-outer-diameter-140mm-lange-112mm-no-bore-sku-60560307/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 125 max. torque 720Nm nominal torque 240Nm outer diameter 125mm Länge 102mm no bore SKU: 60560306](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-125-max-torque-720nm-nominal-torque-240nm-outer-diameter-125mm-lange-102mm-no-bore-sku-60560306/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX 3-part version cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore SKU: 60560305](https://maedler.in/product/elastic-pin-coupling-maepex-3-part-version-cast-iron-baugrose-110-max-torque-480nm-nominal-torque-160nm-outer-diameter-110mm-lange-82mm-no-bore-sku-60560305/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect. With bolt-on jaw ring.The removable jaw ring allows to replace the elastomers without moving the hubs on the shafts.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size. * The sizes 250 and 280 have different pilot bores on each side.Customized bores and feather-key grooves available at extra charge.Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 280 NBR 80 Shore A black SKU: 60560113](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-280-nbr-80-shore-a-black-sku-60560113/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 250 NBR 80 Shore A black SKU: 60560112](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-250-nbr-80-shore-a-black-sku-60560112/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 225 NBR 80 Shore A black SKU: 60560111](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-225-nbr-80-shore-a-black-sku-60560111/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 200 NBR 80 Shore A black SKU: 60560110](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-200-nbr-80-shore-a-black-sku-60560110/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 180 NBR 80 Shore A black SKU: 60560109](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-180-nbr-80-shore-a-black-sku-60560109/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 160 NBR 80 Shore A black SKU: 60560108](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-160-nbr-80-shore-a-black-sku-60560108/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 140 NBR 80 Shore A black SKU: 60560107](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-140-nbr-80-shore-a-black-sku-60560107/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 125 NBR 80 Shore A black SKU: 60560106](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-125-nbr-80-shore-a-black-sku-60560106/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 110 NBR 80 Shore A black SKU: 60560105](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-110-nbr-80-shore-a-black-sku-60560105/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 95 NBR 80 Shore A black SKU: 60560104](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-95-nbr-80-shore-a-black-sku-60560104/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 80 NBR 80 Shore A black SKU: 60560103](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-80-nbr-80-shore-a-black-sku-60560103/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 68 NBR 80 Shore A black SKU: 60560102](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-68-nbr-80-shore-a-black-sku-60560102/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Spare part set of elastomeres for coupling MAEPEX size 58 NBR 80 Shore A black SKU: 60560101](https://maedler.in/product/spare-part-set-of-elastomeres-for-coupling-maepex-size-58-nbr-80-shore-a-black-sku-60560101/): Material: NBR, hardness 80ºA Shore, black.Sold by set of 4 to 8 pieces, depending on the coupling size.Other hardnesses in request (soft 65° or hard 90° A Shore).Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 280 max. torque 10000Nm nominal torque 3900Nm outer diameter 280mm Länge 223mm pre-bored 47mm SKU: 60560013](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-280-max-torque-10000nm-nominal-torque-3900nm-outer-diameter-280mm-lange-223mm-pre-bored-47mm-sku-60560013/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 250 max. torque 8400Nm nominal torque 2800Nm outer diameter 250mm Länge 203mm pre-bored 44mm SKU: 60560012](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-250-max-torque-8400nm-nominal-torque-2800nm-outer-diameter-250mm-lange-203mm-pre-bored-44mm-sku-60560012/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 225 max. torque 6000Nm nominal torque 2000Nm outer diameter 225mm Länge 182mm no bore SKU: 60560011](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-225-max-torque-6000nm-nominal-torque-2000nm-outer-diameter-225mm-lange-182mm-no-bore-sku-60560011/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 200 max. torque 4020Nm nominal torque 1340Nm outer diameter 200mm Länge 162mm no bore SKU: 60560010](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-200-max-torque-4020nm-nominal-torque-1340nm-outer-diameter-200mm-lange-162mm-no-bore-sku-60560010/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 180 max. torque 2640Nm nominal torque 880Nm outer diameter 180mm Länge 142mm no bore SKU: 60560009](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-180-max-torque-2640nm-nominal-torque-880nm-outer-diameter-180mm-lange-142mm-no-bore-sku-60560009/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 160 max. torque 1680Nm nominal torque 560Nm outer diameter 160mm Länge 122mm no bore SKU: 60560008](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-160-max-torque-1680nm-nominal-torque-560nm-outer-diameter-160mm-lange-122mm-no-bore-sku-60560008/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 140 max. torque 1080Nm nominal torque 360Nm outer diameter 140mm Länge 112mm no bore SKU: 60560007](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-140-max-torque-1080nm-nominal-torque-360nm-outer-diameter-140mm-lange-112mm-no-bore-sku-60560007/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 125 max. torque 720Nm nominal torque 240Nm outer diameter 125mm Länge 102mm no bore SKU: 60560006](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-125-max-torque-720nm-nominal-torque-240nm-outer-diameter-125mm-lange-102mm-no-bore-sku-60560006/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 110 max. torque 480Nm nominal torque 160Nm outer diameter 110mm Länge 82mm no bore SKU: 60560005](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-110-max-torque-480nm-nominal-torque-160nm-outer-diameter-110mm-lange-82mm-no-bore-sku-60560005/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 95 max. torque 300Nm nominal torque 100Nm outer diameter 95mm Länge 72mm no bore SKU: 60560004](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-95-max-torque-300nm-nominal-torque-100nm-outer-diameter-95mm-lange-72mm-no-bore-sku-60560004/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 80 max. torque 180Nm nominal torque 60Nm outer diameter 80mm Länge 62mm no bore SKU: 60560003](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-80-max-torque-180nm-nominal-torque-60nm-outer-diameter-80mm-lange-62mm-no-bore-sku-60560003/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 68 max. torque 102Nm nominal torque 34Nm outer diameter 68mm Länge 42mm no bore SKU: 60560002](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-68-max-torque-102nm-nominal-torque-34nm-outer-diameter-68mm-lange-42mm-no-bore-sku-60560002/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic pin coupling MAEPEX cast iron Baugröße 58 max. torque 57Nm nominal torque 19Nm outer diameter 58mm Länge 42mm no bore SKU: 60560001](https://maedler.in/product/elastic-pin-coupling-maepex-cast-iron-baugrose-58-max-torque-57nm-nominal-torque-19nm-outer-diameter-58mm-lange-42mm-no-bore-sku-60560001/): Material: Coupling hubs: Grey Cast Iron GG25 (GJL-250). Elastomeres: NBR, hardness 80ºA Shore, black.Torsionally flexible cam coupling, fail-safe, with damping effect.The MÄDLER® version is improved: Machined claws result in longer lifetime.Couplings are non-bored or pre-bored, depending on the size.* The size 280 has different pilot bores: Pilot bore 52mm on the left side / 47mm on the right side.Customized bores and feather-key grooves available at extra charge. Temperature range: -30ºC to +80ºC. - [Elastic coupling RNH with half shell clamps backlash-free size 48 boreholes 50mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60554850](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-48-boreholes-50mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60554850/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 48 boreholes 44mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60554844](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-48-boreholes-44mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60554844/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 48 boreholes 40mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60554840](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-48-boreholes-40mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60554840/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 48 prebore 20mm (no H7) outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60554820](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-48-prebore-20mm-no-h7-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60554820/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 boreholes 50mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554250](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-boreholes-50mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554250/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 boreholes 44mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554244](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-boreholes-44mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554244/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 boreholes 38mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554238](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-boreholes-38mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554238/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 boreholes 35mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554235](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-boreholes-35mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554235/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 42 prebore 20mm (no H7) outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60554220](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-42-prebore-20mm-no-h7-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60554220/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 boreholes 44mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553844](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-boreholes-44mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553844/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 boreholes 38mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553838](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-boreholes-38mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553838/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 boreholes 35mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553835](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-boreholes-35mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553835/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 boreholes 32mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553832](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-boreholes-32mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553832/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 38 prebore 10mm (no H7) outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60553810](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-38-prebore-10mm-no-h7-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60553810/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 35mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552835](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-35mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552835/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 32mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552832](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-32mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552832/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 28mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552828](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-28mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552828/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 25mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552825](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-25mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552825/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 boreholes 24mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552824](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-boreholes-24mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552824/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 28 prebore 10mm (no H7) outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60552810](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-28-prebore-10mm-no-h7-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60552810/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 boreholes 28mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552428](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-boreholes-28mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552428/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 boreholes 25mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552425](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-boreholes-25mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552425/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 boreholes 24mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552424](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-boreholes-24mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552424/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 boreholes 20mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552420](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-boreholes-20mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552420/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 24 prebore 5mm (no H7) outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60552405](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-24-prebore-5mm-no-h7-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60552405/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 boreholes 20mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551920](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-boreholes-20mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551920/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 boreholes 19mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551919](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-boreholes-19mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551919/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 boreholes 16mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551916](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-boreholes-16mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551916/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 boreholes 14mm outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551914](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-boreholes-14mm-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551914/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 19 prebore 5mm (no H7) outer diameter 40mm overall length 66mm insert 98° shore red SKU: 60551905](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-19-prebore-5mm-no-h7-outer-diameter-40mm-overall-length-66mm-insert-98-shore-red-sku-60551905/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 14 boreholes 14mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60551414](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-14-boreholes-14mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60551414/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 14 boreholes 11mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60551411](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-14-boreholes-11mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60551411/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 14 boreholes 10mm outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60551410](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-14-boreholes-10mm-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60551410/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNH with half shell clamps backlash-free size 14 prebore 3mm (no H7) outer diameter 30mm overall length 35mm insert 98° shore red SKU: 60551403](https://maedler.in/product/elastic-coupling-rnh-with-half-shell-clamps-backlash-free-size-14-prebore-3mm-no-h7-outer-diameter-30mm-overall-length-35mm-insert-98-shore-red-sku-60551403/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With removable half shell clamps, ready-to-install for rapid mounting with the possibility of demounting without removal of the other units. - Many different sizes and diameters available. - Size exchangeable with couplings RN, RNK and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 48 boreholes 50mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60544850](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-48-boreholes-50mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60544850/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 48 boreholes 45mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60544845](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-48-boreholes-45mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60544845/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 48 boreholes 38mm outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60544838](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-48-boreholes-38mm-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60544838/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 48 prebore 20mm (no H7) outer diameter 105mm overall length 140mm insert 98° shore red SKU: 60544820](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-48-prebore-20mm-no-h7-outer-diameter-105mm-overall-length-140mm-insert-98-shore-red-sku-60544820/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 42 boreholes 45mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60544245](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-42-boreholes-45mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60544245/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 42 boreholes 38mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60544238](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-42-boreholes-38mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60544238/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 42 boreholes 32mm outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60544232](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-42-boreholes-32mm-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60544232/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 42 prebore 20mm (no H7) outer diameter 95mm overall length 126mm insert 98° shore red SKU: 60544220](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-42-prebore-20mm-no-h7-outer-diameter-95mm-overall-length-126mm-insert-98-shore-red-sku-60544220/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 38 boreholes 38mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60543838](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-38-boreholes-38mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60543838/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 38 boreholes 32mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60543832](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-38-boreholes-32mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60543832/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 38 boreholes 28mm outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60543828](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-38-boreholes-28mm-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60543828/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 38 prebore 10mm (no H7) outer diameter 80mm overall length 114mm insert 98° shore red SKU: 60543810](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-38-prebore-10mm-no-h7-outer-diameter-80mm-overall-length-114mm-insert-98-shore-red-sku-60543810/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 28 boreholes 32mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60542832](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-28-boreholes-32mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60542832/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 28 boreholes 28mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60542828](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-28-boreholes-28mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60542828/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 28 boreholes 24mm outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60542824](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-28-boreholes-24mm-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60542824/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 28 prebore 10mm (no H7) outer diameter 65mm overall length 90mm insert 98° shore red SKU: 60542810](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-28-prebore-10mm-no-h7-outer-diameter-65mm-overall-length-90mm-insert-98-shore-red-sku-60542810/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Elastic coupling RNK with clamp hubs backlash-free size 24 boreholes 24mm outer diameter 55mm overall length 78mm insert 98° shore red SKU: 60542424](https://maedler.in/product/elastic-coupling-rnk-with-clamp-hubs-backlash-free-size-24-boreholes-24mm-outer-diameter-55mm-overall-length-78mm-insert-98-shore-red-sku-60542424/): Material: Hubs made from Aluminium. Spider made from Polyurethane. Size 5 - 9: Shore hardness 92°A (gelb oder weiß). From size 14: Shore hardness 98°A (red). - Zero backlash, insertable elastic coupling. - With clamps, ready-to-install for rapid mounting. - Many different sizes and diameters available. - From size 14 can be exchanged with couplings RN, RNH and couplings from many other suppliers. On request with soft spiders 92°A. Temperature range: -30°C to +90°C. Note: Bores with * are pilot bores (not H7). The torque depends on the size of the finished bore. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 25 teeth material steel SKU: 12522500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-25-teeth-material-steel-sku-12522500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 24 teeth material steel SKU: 12522400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-24-teeth-material-steel-sku-12522400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 23 teeth material steel SKU: 12522300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-23-teeth-material-steel-sku-12522300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 22 teeth material steel SKU: 12522200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-22-teeth-material-steel-sku-12522200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 21 teeth material steel SKU: 12522100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-21-teeth-material-steel-sku-12522100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 20 teeth material steel SKU: 12522000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-20-teeth-material-steel-sku-12522000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 19 teeth material steel SKU: 12521900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-19-teeth-material-steel-sku-12521900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 18 teeth material steel SKU: 12521800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-18-teeth-material-steel-sku-12521800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 17 teeth material steel SKU: 12521700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-17-teeth-material-steel-sku-12521700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 16 teeth material steel SKU: 12521600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-16-teeth-material-steel-sku-12521600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 15 teeth material steel SKU: 12521500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-15-teeth-material-steel-sku-12521500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 14 teeth material steel SKU: 12521400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-14-teeth-material-steel-sku-12521400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 13 teeth material steel SKU: 12521300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-13-teeth-material-steel-sku-12521300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 12 teeth material steel SKU: 12521200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-12-teeth-material-steel-sku-12521200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 11 teeth material steel SKU: 12521100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-11-teeth-material-steel-sku-12521100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 114 teeth material cast iron SKU: 12518800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-114-teeth-material-cast-iron-sku-12518800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 95 teeth material cast iron SKU: 12518300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-95-teeth-material-cast-iron-sku-12518300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 76 teeth material cast iron SKU: 12517600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-76-teeth-material-cast-iron-sku-12517600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 57 teeth material cast iron SKU: 12515700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-57-teeth-material-cast-iron-sku-12515700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 45 teeth material cast iron SKU: 12514500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-45-teeth-material-cast-iron-sku-12514500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 40 teeth material steel SKU: 12514000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-40-teeth-material-steel-sku-12514000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 38 teeth material steel SKU: 12513800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-38-teeth-material-steel-sku-12513800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 37 teeth material steel SKU: 12513700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-37-teeth-material-steel-sku-12513700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 36 teeth material steel SKU: 12513600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-36-teeth-material-steel-sku-12513600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 35 teeth material steel SKU: 12513500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-35-teeth-material-steel-sku-12513500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 32 teeth material steel SKU: 12513200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-32-teeth-material-steel-sku-12513200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 30 teeth material steel SKU: 12513000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-30-teeth-material-steel-sku-12513000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 28 teeth material steel SKU: 12512800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-28-teeth-material-steel-sku-12512800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 27 teeth material steel SKU: 12512700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-27-teeth-material-steel-sku-12512700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 26 teeth material steel SKU: 12512600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-26-teeth-material-steel-sku-12512600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 25 teeth material steel SKU: 12512500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-25-teeth-material-steel-sku-12512500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 24 teeth material steel SKU: 12512400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-24-teeth-material-steel-sku-12512400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 23 teeth material steel SKU: 12512300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-23-teeth-material-steel-sku-12512300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 22 teeth material steel SKU: 12512200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-22-teeth-material-steel-sku-12512200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 21 teeth material steel SKU: 12512100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-21-teeth-material-steel-sku-12512100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 20 teeth material steel SKU: 12512000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-20-teeth-material-steel-sku-12512000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 19 teeth material steel SKU: 12511900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-19-teeth-material-steel-sku-12511900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 18 teeth material steel SKU: 12511800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-18-teeth-material-steel-sku-12511800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 17 teeth material steel SKU: 12511700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-17-teeth-material-steel-sku-12511700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 16 teeth material steel SKU: 12511600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-16-teeth-material-steel-sku-12511600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 15 teeth material steel SKU: 12511500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-15-teeth-material-steel-sku-12511500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 14 teeth material steel SKU: 12511400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-14-teeth-material-steel-sku-12511400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 13 teeth material steel SKU: 12511300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-13-teeth-material-steel-sku-12511300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 12 teeth material steel SKU: 12511200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-12-teeth-material-steel-sku-12511200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 11 teeth material steel SKU: 12511100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-11-teeth-material-steel-sku-12511100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 10 teeth material steel SKU: 12511000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-10-teeth-material-steel-sku-12511000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 9 teeth material steel SKU: 12510900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-9-teeth-material-steel-sku-12510900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 08 B-2 1/2x5/16" 8 teeth material steel SKU: 12510800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-08-b-2-1-2x5-16-8-teeth-material-steel-sku-12510800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 06 B-2 3/8x7/32" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12199112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-06-b-2-3-8x7-32-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12199112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 25 teeth material steel teeth hardened SKU: 12188525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-teeth-hardened-sku-12188525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 23 teeth material steel teeth hardened SKU: 12188523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-teeth-hardened-sku-12188523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 21 teeth material steel teeth hardened SKU: 12188521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-teeth-hardened-sku-12188521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 20 teeth material steel teeth hardened SKU: 12188520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-teeth-hardened-sku-12188520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 19 teeth material steel teeth hardened SKU: 12188519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-teeth-hardened-sku-12188519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 18 teeth material steel teeth hardened SKU: 12188518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-teeth-hardened-sku-12188518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 17 teeth material steel teeth hardened SKU: 12188517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-17-teeth-material-steel-teeth-hardened-sku-12188517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 16 teeth material steel teeth hardened SKU: 12188516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-16-teeth-material-steel-teeth-hardened-sku-12188516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 15 teeth material steel teeth hardened SKU: 12188515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-15-teeth-material-steel-teeth-hardened-sku-12188515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 14 teeth material steel teeth hardened SKU: 12188514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-14-teeth-material-steel-teeth-hardened-sku-12188514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 06 B-1 13 teeth material steel teeth hardened SKU: 12188513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-06-b-1-13-teeth-material-steel-teeth-hardened-sku-12188513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 5.3 mm, B2 = 21 mm, c = 1 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 25 teeth material steel teeth hardened SKU: 12188425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-25-teeth-material-steel-teeth-hardened-sku-12188425/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 23 teeth material steel teeth hardened SKU: 12188423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-23-teeth-material-steel-teeth-hardened-sku-12188423/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 21 teeth material steel teeth hardened SKU: 12188421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-21-teeth-material-steel-teeth-hardened-sku-12188421/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 20 teeth material steel teeth hardened SKU: 12188420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-20-teeth-material-steel-teeth-hardened-sku-12188420/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 19 teeth material steel teeth hardened SKU: 12188419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-19-teeth-material-steel-teeth-hardened-sku-12188419/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 18 teeth material steel teeth hardened SKU: 12188418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-18-teeth-material-steel-teeth-hardened-sku-12188418/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 17 teeth material steel teeth hardened SKU: 12188417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-17-teeth-material-steel-teeth-hardened-sku-12188417/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 16 teeth material steel teeth hardened SKU: 12188416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-16-teeth-material-steel-teeth-hardened-sku-12188416/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 15 teeth material steel teeth hardened SKU: 12188415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-15-teeth-material-steel-teeth-hardened-sku-12188415/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 14 teeth material steel teeth hardened SKU: 12188414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-14-teeth-material-steel-teeth-hardened-sku-12188414/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 06 B-1 13 teeth material steel teeth hardened SKU: 12188413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-06-b-1-13-teeth-material-steel-teeth-hardened-sku-12188413/): Material: Steel C45, teeth induction hardened (approx. HRC 50). Pre-bored. Pitch 3/8 x 7/32" General dimensions: B1 = 5,3 mm, c = 1,0 mm, r3 = 10 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 40 teeth material steel teeth induction hardened SKU: 12188140](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-40-teeth-material-steel-teeth-induction-hardened-sku-12188140/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 38 teeth material steel teeth induction hardened SKU: 12188138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-38-teeth-material-steel-teeth-induction-hardened-sku-12188138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 35 teeth material steel teeth induction hardened SKU: 12188135](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-35-teeth-material-steel-teeth-induction-hardened-sku-12188135/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 32 teeth material steel teeth induction hardened SKU: 12188132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-32-teeth-material-steel-teeth-induction-hardened-sku-12188132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 30 teeth material steel teeth induction hardened SKU: 12188130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-30-teeth-material-steel-teeth-induction-hardened-sku-12188130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 28 teeth material steel teeth induction hardened SKU: 12188128](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-28-teeth-material-steel-teeth-induction-hardened-sku-12188128/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 27 teeth material steel teeth induction hardened SKU: 12188127](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-27-teeth-material-steel-teeth-induction-hardened-sku-12188127/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 26 teeth material steel teeth induction hardened SKU: 12188126](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-26-teeth-material-steel-teeth-induction-hardened-sku-12188126/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 25 teeth material steel teeth induction hardened SKU: 12188125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-25-teeth-material-steel-teeth-induction-hardened-sku-12188125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 24 teeth material steel teeth induction hardened SKU: 12188124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-24-teeth-material-steel-teeth-induction-hardened-sku-12188124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 23 teeth material steel teeth induction hardened SKU: 12188123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-23-teeth-material-steel-teeth-induction-hardened-sku-12188123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 22 teeth material steel teeth induction hardened SKU: 12188122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-22-teeth-material-steel-teeth-induction-hardened-sku-12188122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 21 teeth material steel teeth induction hardened SKU: 12188121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-21-teeth-material-steel-teeth-induction-hardened-sku-12188121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 20 teeth material steel teeth induction hardened SKU: 12188120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-20-teeth-material-steel-teeth-induction-hardened-sku-12188120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 19 teeth material steel teeth induction hardened SKU: 12188119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-19-teeth-material-steel-teeth-induction-hardened-sku-12188119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 18 teeth material steel teeth induction hardened SKU: 12188118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-18-teeth-material-steel-teeth-induction-hardened-sku-12188118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 17 teeth material steel teeth induction hardened SKU: 12188117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-17-teeth-material-steel-teeth-induction-hardened-sku-12188117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 16 teeth material steel teeth induction hardened SKU: 12188116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-16-teeth-material-steel-teeth-induction-hardened-sku-12188116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 15 teeth material steel teeth induction hardened SKU: 12188115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-15-teeth-material-steel-teeth-induction-hardened-sku-12188115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 14 teeth material steel teeth induction hardened SKU: 12188114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-14-teeth-material-steel-teeth-induction-hardened-sku-12188114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 13 teeth material steel teeth induction hardened SKU: 12188113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-13-teeth-material-steel-teeth-induction-hardened-sku-12188113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 12 teeth material steel teeth induction hardened SKU: 12188112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-12-teeth-material-steel-teeth-induction-hardened-sku-12188112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 11 teeth material steel teeth induction hardened SKU: 12188111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-11-teeth-material-steel-teeth-induction-hardened-sku-12188111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 06 B-2 3/8x7/32" 10 teeth material steel teeth induction hardened SKU: 12188110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-06-b-2-3-8x7-32-10-teeth-material-steel-teeth-induction-hardened-sku-12188110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 5,2 mm, B2 = 15,4 mm, c = 1,0 mm, r3 = 10 mm.Other dimensions: See the table. - [Stud screw DIN 6379 quality 8.8 M14 x 250mm SKU: 655114250](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m14-x-250mm-sku-655114250/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M14 x 160mm SKU: 655114160](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m14-x-160mm-sku-655114160/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M14 x 100mm SKU: 655114100](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m14-x-100mm-sku-655114100/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M14 x 63mm SKU: 655114063](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m14-x-63mm-sku-655114063/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M12 x 200mm SKU: 655112200](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m12-x-200mm-sku-655112200/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M12 x 160mm SKU: 655112160](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m12-x-160mm-sku-655112160/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M12 x 125mm SKU: 655112125](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m12-x-125mm-sku-655112125/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M12 x 100mm SKU: 655112100](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m12-x-100mm-sku-655112100/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M12 x 80mm SKU: 655112080](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m12-x-80mm-sku-655112080/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M12 x 63mm SKU: 655112063](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m12-x-63mm-sku-655112063/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M12 x 50mm SKU: 655112050](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m12-x-50mm-sku-655112050/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M10 x 200mm SKU: 655110200](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m10-x-200mm-sku-655110200/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M10 x 160mm SKU: 655110160](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m10-x-160mm-sku-655110160/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M10 x 125mm SKU: 655110125](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m10-x-125mm-sku-655110125/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M10 x 100mm SKU: 655110100](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m10-x-100mm-sku-655110100/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M10 x 80mm SKU: 655110080](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m10-x-80mm-sku-655110080/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M10 x 50mm SKU: 655110050](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m10-x-50mm-sku-655110050/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M8 x 160mm SKU: 655108160](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m8-x-160mm-sku-655108160/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M8 x 100mm SKU: 655108100](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m8-x-100mm-sku-655108100/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M8 x 63mm SKU: 655108063](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m8-x-63mm-sku-655108063/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M8 x 40mm SKU: 655108040](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m8-x-40mm-sku-655108040/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M6 x 80mm SKU: 655106080](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m6-x-80mm-sku-655106080/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M6 x 63mm SKU: 655106063](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m6-x-63mm-sku-655106063/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M6 x 50mm SKU: 655106050](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m6-x-50mm-sku-655106050/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 10.9 M6 x 32mm SKU: 655106032](https://maedler.in/product/stud-screw-din-6379-quality-10-9-m6-x-32mm-sku-655106032/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [T-slot bolt similar DIN 787 for slots 22mm M20 x 160mm strength 8.8 SKU: 65503200](https://maedler.in/product/t-slot-bolt-similar-din-787-for-slots-22mm-m20-x-160mm-strength-8-8-sku-65503200/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 22mm M20 x 125mm strength 8.8 SKU: 65503000](https://maedler.in/product/t-slot-bolt-din-787-for-slots-22mm-m20-x-125mm-strength-8-8-sku-65503000/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 22mm M20 x 80mm strength 8.8 SKU: 65502900](https://maedler.in/product/t-slot-bolt-din-787-for-slots-22mm-m20-x-80mm-strength-8-8-sku-65502900/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt similar DIN 787 for slots 20mm M20 x 160mm strength 8.8 SKU: 65502800](https://maedler.in/product/t-slot-bolt-similar-din-787-for-slots-20mm-m20-x-160mm-strength-8-8-sku-65502800/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 18mm M16 x 160mm strength 8.8 SKU: 65502600](https://maedler.in/product/t-slot-bolt-din-787-for-slots-18mm-m16-x-160mm-strength-8-8-sku-65502600/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 18mm M16 x 100mm strength 8.8 SKU: 65502400](https://maedler.in/product/t-slot-bolt-din-787-for-slots-18mm-m16-x-100mm-strength-8-8-sku-65502400/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 18mm M16 x 63mm strength 8.8 SKU: 65502300](https://maedler.in/product/t-slot-bolt-din-787-for-slots-18mm-m16-x-63mm-strength-8-8-sku-65502300/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt similar DIN 787 for slots 16mm M16 x 160mm strength 8.8 SKU: 65502200](https://maedler.in/product/t-slot-bolt-similar-din-787-for-slots-16mm-m16-x-160mm-strength-8-8-sku-65502200/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt similar DIN 787 for slots 16mm M16 x 100mm strength 8.8 SKU: 65502000](https://maedler.in/product/t-slot-bolt-similar-din-787-for-slots-16mm-m16-x-100mm-strength-8-8-sku-65502000/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt similar DIN 787 for slots 16mm M16 x 63mm strength 8.8 SKU: 65501900](https://maedler.in/product/t-slot-bolt-similar-din-787-for-slots-16mm-m16-x-63mm-strength-8-8-sku-65501900/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 14mm M12 x 125mm strength 10.9 SKU: 65501800](https://maedler.in/product/t-slot-bolt-din-787-for-slots-14mm-m12-x-125mm-strength-10-9-sku-65501800/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 14mm M12 x 80mm strength 10.9 SKU: 65501600](https://maedler.in/product/t-slot-bolt-din-787-for-slots-14mm-m12-x-80mm-strength-10-9-sku-65501600/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 14mm M12 x 50mm strength 10.9 SKU: 65501500](https://maedler.in/product/t-slot-bolt-din-787-for-slots-14mm-m12-x-50mm-strength-10-9-sku-65501500/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 12mm M12 x 125mm strength 10.9 SKU: 65501400](https://maedler.in/product/t-slot-bolt-din-787-for-slots-12mm-m12-x-125mm-strength-10-9-sku-65501400/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 12mm M12 x 80mm strength 10.9 SKU: 65501200](https://maedler.in/product/t-slot-bolt-din-787-for-slots-12mm-m12-x-80mm-strength-10-9-sku-65501200/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 12mm M12 x 50mm strength 10.9 SKU: 65501100](https://maedler.in/product/t-slot-bolt-din-787-for-slots-12mm-m12-x-50mm-strength-10-9-sku-65501100/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 10mm M10 x 100mm strength 10.9 SKU: 65500900](https://maedler.in/product/t-slot-bolt-din-787-for-slots-10mm-m10-x-100mm-strength-10-9-sku-65500900/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 10mm M10 x 63mm strength 10.9 SKU: 65500700](https://maedler.in/product/t-slot-bolt-din-787-for-slots-10mm-m10-x-63mm-strength-10-9-sku-65500700/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 10mm M10 x 40mm strength 10.9 SKU: 65500600](https://maedler.in/product/t-slot-bolt-din-787-for-slots-10mm-m10-x-40mm-strength-10-9-sku-65500600/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 8mm M8 x 80mm strength 10.9 SKU: 65500500](https://maedler.in/product/t-slot-bolt-din-787-for-slots-8mm-m8-x-80mm-strength-10-9-sku-65500500/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 8mm M8 x 50mm strength 10.9 SKU: 65500400](https://maedler.in/product/t-slot-bolt-din-787-for-slots-8mm-m8-x-50mm-strength-10-9-sku-65500400/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 6mm M6 x 40mm strength 10.9 SKU: 65500200](https://maedler.in/product/t-slot-bolt-din-787-for-slots-6mm-m6-x-40mm-strength-10-9-sku-65500200/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [T-slot bolt DIN 787 for slots 6mm M6 x 25mm strength 10.9 SKU: 65500100](https://maedler.in/product/t-slot-bolt-din-787-for-slots-6mm-m6-x-25mm-strength-10-9-sku-65500100/): Material: Tempered steel Version: Forged, slot flats milled, black oxide finish. Tensile strength: Up to M12: strength 10.9. Above M12: strength 8.8. More sizes up to M36 x 600mm on request. * These dimensions are not part of the DIN. - [Swing bolt DIN 444 thread M20x63mm l1=160mm stainless steel SKU: 65499430](https://maedler.in/product/swing-bolt-din-444-thread-m20x63mm-l1160mm-stainless-steel-sku-65499430/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M20x63mm l1=130mm stainless steel SKU: 65499429](https://maedler.in/product/swing-bolt-din-444-thread-m20x63mm-l1130mm-stainless-steel-sku-65499429/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M20x63mm l1=100mm stainless steel SKU: 65499428](https://maedler.in/product/swing-bolt-din-444-thread-m20x63mm-l1100mm-stainless-steel-sku-65499428/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M16x50mm l1=130mm stainless steel SKU: 65499426](https://maedler.in/product/swing-bolt-din-444-thread-m16x50mm-l1130mm-stainless-steel-sku-65499426/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M16x50mm l1=100mm stainless steel SKU: 65499425](https://maedler.in/product/swing-bolt-din-444-thread-m16x50mm-l1100mm-stainless-steel-sku-65499425/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M16x50mm l1=75mm stainless steel SKU: 65499424](https://maedler.in/product/swing-bolt-din-444-thread-m16x50mm-l175mm-stainless-steel-sku-65499424/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M12x40mm l1=130mm stainless steel SKU: 65499421](https://maedler.in/product/swing-bolt-din-444-thread-m12x40mm-l1130mm-stainless-steel-sku-65499421/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M12x40mm l1=100mm stainless steel SKU: 65499420](https://maedler.in/product/swing-bolt-din-444-thread-m12x40mm-l1100mm-stainless-steel-sku-65499420/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M12x40mm l1=75mm stainless steel SKU: 65499418](https://maedler.in/product/swing-bolt-din-444-thread-m12x40mm-l175mm-stainless-steel-sku-65499418/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M10x40mm l1=100mm stainless steel SKU: 65499416](https://maedler.in/product/swing-bolt-din-444-thread-m10x40mm-l1100mm-stainless-steel-sku-65499416/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M10x40mm l1=75mm stainless steel SKU: 65499415](https://maedler.in/product/swing-bolt-din-444-thread-m10x40mm-l175mm-stainless-steel-sku-65499415/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M10x40mm l1=50mm stainless steel SKU: 65499414](https://maedler.in/product/swing-bolt-din-444-thread-m10x40mm-l150mm-stainless-steel-sku-65499414/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M8x32mm l1=75mm stainless steel SKU: 65499411](https://maedler.in/product/swing-bolt-din-444-thread-m8x32mm-l175mm-stainless-steel-sku-65499411/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M8x32mm l1=50mm stainless steel SKU: 65499410](https://maedler.in/product/swing-bolt-din-444-thread-m8x32mm-l150mm-stainless-steel-sku-65499410/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M6x32mm l1=75mm stainless steel SKU: 65499407](https://maedler.in/product/swing-bolt-din-444-thread-m6x32mm-l175mm-stainless-steel-sku-65499407/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M6x32mm l1=50mm stainless steel SKU: 65499406](https://maedler.in/product/swing-bolt-din-444-thread-m6x32mm-l150mm-stainless-steel-sku-65499406/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M5x32mm l1=75mm stainless steel SKU: 65499405](https://maedler.in/product/swing-bolt-din-444-thread-m5x32mm-l175mm-stainless-steel-sku-65499405/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Swing bolt DIN 444 thread M5x32mm l1=50mm stainless steel SKU: 65499404](https://maedler.in/product/swing-bolt-din-444-thread-m5x32mm-l150mm-stainless-steel-sku-65499404/): Material: Stainless steel 1.4305 (AISI 303). Precision made, thread rolled. The thread lentgh is larger than DIN. The same size stainless steel version is not part of the DIN. - [Thrust pad DIN 6311 stainless steel 1.4301 (AISI 304) diameter 40mm with snap ring DIN 9045 SKU: 65499120](https://maedler.in/product/thrust-pad-din-6311-stainless-steel-1-4301-aisi-304-diameter-40mm-with-snap-ring-din-9045-sku-65499120/): Material: Stainless steel 1.4301 (AISI 304). Spring retainer included. For grub screws DIN 6332. - [Thrust pad DIN 6311 stainless steel 1.4301 (AISI 304) diameter 32mm with snap ring DIN 9045 SKU: 65499116](https://maedler.in/product/thrust-pad-din-6311-stainless-steel-1-4301-aisi-304-diameter-32mm-with-snap-ring-din-9045-sku-65499116/): Material: Stainless steel 1.4301 (AISI 304). Spring retainer included. For grub screws DIN 6332. - [Thrust pad DIN 6311 stainless steel 1.4301 (AISI 304) diameter 25mm with snap ring DIN 9045 SKU: 65499112](https://maedler.in/product/thrust-pad-din-6311-stainless-steel-1-4301-aisi-304-diameter-25mm-with-snap-ring-din-9045-sku-65499112/): Material: Stainless steel 1.4301 (AISI 304). Spring retainer included. For grub screws DIN 6332. - [Thrust pad DIN 6311 stainless steel 1.4301 (AISI 304) diameter 20mm with snap ring DIN 9045 SKU: 65499110](https://maedler.in/product/thrust-pad-din-6311-stainless-steel-1-4301-aisi-304-diameter-20mm-with-snap-ring-din-9045-sku-65499110/): Material: Stainless steel 1.4301 (AISI 304). Spring retainer included. For grub screws DIN 6332. - [Thrust pad DIN 6311 stainless steel 1.4301 (AISI 304) diameter 16mm with snap ring DIN 9045 SKU: 65499108](https://maedler.in/product/thrust-pad-din-6311-stainless-steel-1-4301-aisi-304-diameter-16mm-with-snap-ring-din-9045-sku-65499108/): Material: Stainless steel 1.4301 (AISI 304). Spring retainer included. For grub screws DIN 6332. - [Thrust pad DIN 6311 stainless steel 1.4301 (AISI 304) diameter 12mm with snap ring DIN 9045 SKU: 65499106](https://maedler.in/product/thrust-pad-din-6311-stainless-steel-1-4301-aisi-304-diameter-12mm-with-snap-ring-din-9045-sku-65499106/): Material: Stainless steel 1.4301 (AISI 304). Spring retainer included. For grub screws DIN 6332. - [Grub screw DIN 6332 with thrust point with internal hexagon thread M20 length 150mm stainless steel SKU: 6549903201](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m20-length-150mm-stainless-steel-sku-6549903201/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M20 length 150mm stainless steel SKU: 6549903200](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m20-length-150mm-stainless-steel-sku-6549903200/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M20 length 125mm stainless steel SKU: 6549903101](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m20-length-125mm-stainless-steel-sku-6549903101/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M20 length 125mm stainless steel SKU: 6549903100](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m20-length-125mm-stainless-steel-sku-6549903100/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M20 length 100mm stainless steel SKU: 6549903001](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m20-length-100mm-stainless-steel-sku-6549903001/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M20 length 100mm stainless steel SKU: 6549903000](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m20-length-100mm-stainless-steel-sku-6549903000/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M16 length 125mm stainless steel SKU: 6549902601](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m16-length-125mm-stainless-steel-sku-6549902601/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M16 length 125mm stainless steel SKU: 6549902600](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m16-length-125mm-stainless-steel-sku-6549902600/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M16 length 100mm stainless steel SKU: 6549902501](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m16-length-100mm-stainless-steel-sku-6549902501/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M16 length 100mm stainless steel SKU: 6549902500](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m16-length-100mm-stainless-steel-sku-6549902500/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M16 length 80mm stainless steel SKU: 6549902401](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m16-length-80mm-stainless-steel-sku-6549902401/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M16 length 80mm stainless steel SKU: 6549902400](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m16-length-80mm-stainless-steel-sku-6549902400/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M12 length 100mm stainless steel SKU: 6549902001](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m12-length-100mm-stainless-steel-sku-6549902001/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M12 length 100mm stainless steel SKU: 6549902000](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m12-length-100mm-stainless-steel-sku-6549902000/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M12 length 80mm stainless steel SKU: 6549901901](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m12-length-80mm-stainless-steel-sku-6549901901/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M12 length 80mm stainless steel SKU: 6549901900](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m12-length-80mm-stainless-steel-sku-6549901900/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M12 length 60mm stainless steel SKU: 6549901701](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m12-length-60mm-stainless-steel-sku-6549901701/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M12 length 60mm stainless steel SKU: 6549901700](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m12-length-60mm-stainless-steel-sku-6549901700/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M10 length 80mm stainless steel SKU: 6549901501](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m10-length-80mm-stainless-steel-sku-6549901501/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M10 length 80mm stainless steel SKU: 6549901500](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m10-length-80mm-stainless-steel-sku-6549901500/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M10 length 60mm stainless steel SKU: 6549901301](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m10-length-60mm-stainless-steel-sku-6549901301/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M10 length 60mm stainless steel SKU: 6549901300](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m10-length-60mm-stainless-steel-sku-6549901300/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M8 length 60mm stainless steel SKU: 6549901101](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m8-length-60mm-stainless-steel-sku-6549901101/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M8 length 60mm stainless steel SKU: 6549901100](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m8-length-60mm-stainless-steel-sku-6549901100/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M8 length 40mm stainless steel SKU: 6549900901](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m8-length-40mm-stainless-steel-sku-6549900901/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M8 length 40mm stainless steel SKU: 6549900900](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m8-length-40mm-stainless-steel-sku-6549900900/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point with internal hexagon thread M6 length 50mm stainless steel SKU: 6549900701](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-with-internal-hexagon-thread-m6-length-50mm-stainless-steel-sku-6549900701/): Material: Stainless steel 1.4301 (AISI 304). Type IS: With internal hexagon. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 (product no. 65499106-65499120). - [Grub screw DIN 6332 with thrust point thread M6 length 50mm stainless steel SKU: 6549900700](https://maedler.in/product/grub-screw-din-6332-with-thrust-point-thread-m6-length-50mm-stainless-steel-sku-6549900700/): Material: Stainless steel 1.4301 (AISI 304). Type S: With slot. Assembly: Turn thrust screw into thrust pad. The thrust pad has to be held thus that the spring retainer lies in the recess with its open side at the bottom. Now tilt the grub screw as far as possible towards the open side of the ring and press it in. To be combined with the thrust pads DIN 6311 on the same catalog page (product no. 65499106-65499120). - [Hub part for toothed coupling BOS II size 24 bore 12mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762412](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-12mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762412/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 prebored 10mm sintered metal hub diameter 36mm length 21mm SKU: 60762401](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-prebored-10mm-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762401/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 24 outside diameter 52mm length 40mm SKU: 60762400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-24-outside-diameter-52mm-length-40mm-sku-60762400/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 19mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761919](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-19mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761919/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 16mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761916](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-16mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761916/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 15mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761915](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-15mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761915/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 14mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761914](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-14mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761914/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 12mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761912](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-12mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761912/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 bore 10mm with keyway sintered metal hub diameter 32mm length 21mm SKU: 60761910](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-bore-10mm-with-keyway-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761910/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 19 prebored 10mm sintered metal hub diameter 32mm length 21mm SKU: 60761901](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-19-prebored-10mm-sintered-metal-hub-diameter-32mm-length-21mm-sku-60761901/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 19 outside diameter 48mm length 37mm SKU: 60761900](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-19-outside-diameter-48mm-length-37mm-sku-60761900/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 bore 14mm with keyway sintered metal hub diameter 25mm length 20mm SKU: 60761414](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-bore-14mm-with-keyway-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761414/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 bore 12mm with keyway sintered metal hub diameter 25mm length 20mm SKU: 60761412](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-bore-12mm-with-keyway-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761412/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 bore 10mm with keyway sintered metal hub diameter 25mm length 20mm SKU: 60761410](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-bore-10mm-with-keyway-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761410/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 bore 8mm with keyway sintered metal hub diameter 25mm length 20mm SKU: 60761408](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-bore-8mm-with-keyway-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761408/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 14 prebored 5mm sintered metal hub diameter 25mm length 20mm SKU: 60761401](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-14-prebored-5mm-sintered-metal-hub-diameter-25mm-length-20mm-sku-60761401/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 14 outside diameter 40mm length 37mm SKU: 60761400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-14-outside-diameter-40mm-length-37mm-sku-60761400/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOZ+BW size 24 bore 24mm with keyway material PA6.6 SKU: 60742400](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-24mm-with-keyway-material-pa6-6-sku-60742400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 20mm with keyway material PA6.6 SKU: 60742000](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-20mm-with-keyway-material-pa6-6-sku-60742000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 19mm with keyway material PA6.6 SKU: 60741900](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-19mm-with-keyway-material-pa6-6-sku-60741900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 18mm with keyway material PA6.6 SKU: 60741800](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-18mm-with-keyway-material-pa6-6-sku-60741800/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 16mm with keyway material PA6.6 SKU: 60741600](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-16mm-with-keyway-material-pa6-6-sku-60741600/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 15mm with keyway material PA6.6 SKU: 60741500](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-15mm-with-keyway-material-pa6-6-sku-60741500/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 14mm with keyway material PA6.6 SKU: 60741400](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-14mm-with-keyway-material-pa6-6-sku-60741400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 12mm with keyway material PA6.6 SKU: 60741200](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-12mm-with-keyway-material-pa6-6-sku-60741200/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 11mm with keyway material PA6.6 SKU: 60741100](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-11mm-with-keyway-material-pa6-6-sku-60741100/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 24 bore 10mm with keyway material PA6.6 SKU: 60741000](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-24-bore-10mm-with-keyway-material-pa6-6-sku-60741000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BOS+BOZ size 24 material PA6.6 SKU: 60740000](https://maedler.in/product/sleeve-part-for-toothed-coupling-bosboz-size-24-material-pa6-6-sku-60740000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 19 bore 19mm with keyway material PA6.6 SKU: 60721900](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-19-bore-19mm-with-keyway-material-pa6-6-sku-60721900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 19 bore 16mm with keyway material PA6.6 SKU: 60721600](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-19-bore-16mm-with-keyway-material-pa6-6-sku-60721600/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 19 bore 14mm with keyway material PA6.6 SKU: 60721400](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-19-bore-14mm-with-keyway-material-pa6-6-sku-60721400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 19 bore 12mm with keyway material PA6.6 SKU: 60721200](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-19-bore-12mm-with-keyway-material-pa6-6-sku-60721200/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BOS+BOZ size 19 material PA6.6.6 SKU: 60720000](https://maedler.in/product/sleeve-part-for-toothed-coupling-bosboz-size-19-material-pa6-6-6-sku-60720000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm shielded on both sides SKU: 607-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-sku-607-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm shielded on both sides clearance C3 SKU: 607-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-clearance-c3-sku-607-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm sealed on both sides SKU: 607-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-sku-607-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm sealed on both sides SKU: 607-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-sku-607-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm sealed on both sides clearance C3 SKU: 607-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-clearance-c3-sku-607-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm sealed on both sides clearance C3 SKU: 607-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-sealed-on-both-sides-clearance-c3-sku-607-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Hub part for toothed coupling BOZ+BW size 14 bore 14mm with keyway material PA6.6 SKU: 60701400](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-14mm-with-keyway-material-pa6-6-sku-60701400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 12mm with keyway material PA6.6 SKU: 60701200](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-12mm-with-keyway-material-pa6-6-sku-60701200/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 11mm with keyway material PA6.6 SKU: 60701100](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-11mm-with-keyway-material-pa6-6-sku-60701100/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 10mm with keyway material PA6.6 SKU: 60701000](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-10mm-with-keyway-material-pa6-6-sku-60701000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 9mm with keyway material PA6.6 SKU: 60700900](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-9mm-with-keyway-material-pa6-6-sku-60700900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 8mm with keyway material PA6.6 SKU: 60700800](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-8mm-with-keyway-material-pa6-6-sku-60700800/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 7mm with keyway material PA6.6 SKU: 60700700](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-7mm-with-keyway-material-pa6-6-sku-60700700/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Hub part for toothed coupling BOZ+BW size 14 bore 6mm with keyway material PA6.6 SKU: 60700600](https://maedler.in/product/hub-part-for-toothed-coupling-bozbw-size-14-bore-6mm-with-keyway-material-pa6-6-sku-60700600/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BOS+BOZ size 14 material PA6.6 SKU: 60700000](https://maedler.in/product/sleeve-part-for-toothed-coupling-bosboz-size-14-material-pa6-6-sku-60700000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and two hub parts. All 3 components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. Largest radial displacement at speed 1500/min: Size 14 and 19: max. 0,3mm. Size 24: max. 0,35mm. The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm shielded on both sides SKU: 607-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-sku-607-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 7mm outer diameter 19mm width 6mm shielded on both sides clearance C3 SKU: 607-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-7mm-outer-diameter-19mm-width-6mm-shielded-on-both-sides-clearance-c3-sku-607-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Sleeve part for toothed coupling BW size 24 bore 24mm with keyway material PA6.6 SKU: 60652400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-24-bore-24mm-with-keyway-material-pa6-6-sku-60652400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 24 bore 20mm with keyway material PA6.6 SKU: 60652000](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-24-bore-20mm-with-keyway-material-pa6-6-sku-60652000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 24 bore 19mm with keyway material PA6.6 SKU: 60651900](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-24-bore-19mm-with-keyway-material-pa6-6-sku-60651900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 24 bore 14mm with keyway material PA6.6 SKU: 60651400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-24-bore-14mm-with-keyway-material-pa6-6-sku-60651400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 19 bore 19mm with keyway material PA6.6 SKU: 60631900](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-19-bore-19mm-with-keyway-material-pa6-6-sku-60631900/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 19 bore 15mm with keyway material PA6.6 SKU: 60631500](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-19-bore-15mm-with-keyway-material-pa6-6-sku-60631500/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 19 bore 14mm with keyway material PA6.6 SKU: 60631400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-19-bore-14mm-with-keyway-material-pa6-6-sku-60631400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 17mm width 6mm sealed on both sides SKU: 606-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-17mm-width-6mm-sealed-on-both-sides-sku-606-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Sleeve part for toothed coupling BW size 14 bore 14mm with keyway material PA6.6 SKU: 60611400](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-14-bore-14mm-with-keyway-material-pa6-6-sku-60611400/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 14 bore 12mm with keyway material PA6.6 SKU: 60611200](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-14-bore-12mm-with-keyway-material-pa6-6-sku-60611200/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for toothed coupling BW size 14 bore 11mm with keyway material PA6.6 SKU: 60611100](https://maedler.in/product/sleeve-part-for-toothed-coupling-bw-size-14-bore-11mm-with-keyway-material-pa6-6-sku-60611100/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [Sleeve part for curved-toothed coupling BW size 14 bore 10mm with keyway material PA6.6 SKU: 60611000](https://maedler.in/product/sleeve-part-for-curved-toothed-coupling-bw-size-14-bore-10mm-with-keyway-material-pa6-6-sku-60611000/): Material: Polyamide 6.6. Please realize: A complete coupling consists of one sleeve part and one hub part. Both components have to be ordered separately. So, at each outer size, various bore diameters can be chosen and combined. Sleeve part = Taschenteil. Hub part = Nabenteil. Bore tolerance + 0.05/-0.10 mm with feather keyways according to DIN 6885/1 ±0,08 mm. Grub Screws, Stainless steel V4A. Largest axial displacement = max. ±1 mm. Largest angular displacement = max. ±1° at each hub. No radial displacement! The permissible displacement values are dependent on power and speed. Temperature range: -25°C up to +100°C (up to +120°C at short time). - [MAEDLER deep groove ball bearing single row inner diameter 6mm outer diameter 17mm width 6mm shielded on both sides SKU: 606-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-6mm-outer-diameter-17mm-width-6mm-shielded-on-both-sides-sku-606-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Elastic coupling RNI stainless steel 1.4305 size 48 max. torque 620Nm nominal torque 310Nm outer diameter 95mm length 140mm no bore SKU: 60599205](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-48-max-torque-620nm-nominal-torque-310nm-outer-diameter-95mm-length-140mm-no-bore-sku-60599205/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 42 max. torque 530Nm nominal torque 265Nm outer diameter 95mm length 126mm no bore SKU: 60599204](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-42-max-torque-530nm-nominal-torque-265nm-outer-diameter-95mm-length-126mm-no-bore-sku-60599204/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 38 max. torque 380Nm nominal torque 190Nm outer diameter 80mm length 114mm no bore SKU: 60599203](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-38-max-torque-380nm-nominal-torque-190nm-outer-diameter-80mm-length-114mm-no-bore-sku-60599203/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 28 max. torque 190Nm nominal torque 95Nm outer diameter 65mm length 90mm no bore SKU: 60599202](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-28-max-torque-190nm-nominal-torque-95nm-outer-diameter-65mm-length-90mm-no-bore-sku-60599202/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 24 max. torque 70Nm nominal torque 35Nm outer diameter 55mm length 78mm no bore SKU: 60599201](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-24-max-torque-70nm-nominal-torque-35nm-outer-diameter-55mm-length-78mm-no-bore-sku-60599201/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Elastic coupling RNI stainless steel 1.4305 size 19 max. torque 20Nm nominal torque 10Nm outer diameter 40mm length 66mm no bore SKU: 60599200](https://maedler.in/product/elastic-coupling-rni-stainless-steel-1-4305-size-19-max-torque-20nm-nominal-torque-10nm-outer-diameter-40mm-length-66mm-no-bore-sku-60599200/): Material: Hubs of coupling: 1.4305, AISI 303 (1.4571, AISI 316 Ti on request). Spider: Polyurethane, Shore hardness 92°A. Spare spiders either 92°A or 98°A or 64°D Shore. The couplings are available without bore or pre-drilled ex stock. Custom bores or feather keyways available at extra charge. Temperature range: -20°C to +80°C. * B is the avarage dimension by which, e.g., a driven or driving machine has to be moved in order to demount one of the coupled units in vertical direction. Weights refer to max. customized bore without keyways. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 28mm outer diameter 65mm length 38.5mm SKU: 60562828](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-28mm-outer-diameter-65mm-length-38-5mm-sku-60562828/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 25mm outer diameter 65mm length 38.5mm SKU: 60562825](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-25mm-outer-diameter-65mm-length-38-5mm-sku-60562825/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 24mm outer diameter 65mm length 38.5mm SKU: 60562824](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-24mm-outer-diameter-65mm-length-38-5mm-sku-60562824/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 20mm outer diameter 65mm length 38.5mm SKU: 60562820](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-20mm-outer-diameter-65mm-length-38-5mm-sku-60562820/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 28 borehole 14mm outer diameter 65mm length 38.5mm SKU: 60562814](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-28-borehole-14mm-outer-diameter-65mm-length-38-5mm-sku-60562814/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 25mm outer diameter 55mm length 36mm SKU: 60562425](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-25mm-outer-diameter-55mm-length-36mm-sku-60562425/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 24mm outer diameter 55mm length 36mm SKU: 60562424](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-24mm-outer-diameter-55mm-length-36mm-sku-60562424/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 20mm outer diameter 55mm length 36mm SKU: 60562420](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-20mm-outer-diameter-55mm-length-36mm-sku-60562420/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 19mm outer diameter 55mm length 36mm SKU: 60562419](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-19mm-outer-diameter-55mm-length-36mm-sku-60562419/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 16mm outer diameter 55mm length 36mm SKU: 60562416](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-16mm-outer-diameter-55mm-length-36mm-sku-60562416/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 15mm outer diameter 55mm length 36mm SKU: 60562415](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-15mm-outer-diameter-55mm-length-36mm-sku-60562415/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 14mm outer diameter 55mm length 36mm SKU: 60562414](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-14mm-outer-diameter-55mm-length-36mm-sku-60562414/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 24 borehole 10mm outer diameter 55mm length 36mm SKU: 60562410](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-24-borehole-10mm-outer-diameter-55mm-length-36mm-sku-60562410/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 20mm outer diameter 40mm length 31mm SKU: 60561920](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-20mm-outer-diameter-40mm-length-31mm-sku-60561920/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 19mm outer diameter 40mm length 31mm SKU: 60561919](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-19mm-outer-diameter-40mm-length-31mm-sku-60561919/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 16mm outer diameter 40mm length 31mm SKU: 60561916](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-16mm-outer-diameter-40mm-length-31mm-sku-60561916/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 15mm outer diameter 40mm length 31mm SKU: 60561915](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-15mm-outer-diameter-40mm-length-31mm-sku-60561915/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 14mm outer diameter 40mm length 31mm SKU: 60561914](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-14mm-outer-diameter-40mm-length-31mm-sku-60561914/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 12mm outer diameter 40mm length 31mm SKU: 60561912](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-12mm-outer-diameter-40mm-length-31mm-sku-60561912/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 19 borehole 11mm outer diameter 40mm length 31mm SKU: 60561911](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-19-borehole-11mm-outer-diameter-40mm-length-31mm-sku-60561911/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 16mm outer diameter 30mm length 21mm SKU: 60561416](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-16mm-outer-diameter-30mm-length-21mm-sku-60561416/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 15mm outer diameter 30mm length 21mm SKU: 60561415](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-15mm-outer-diameter-30mm-length-21mm-sku-60561415/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 14mm outer diameter 30mm length 21mm SKU: 60561414](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-14mm-outer-diameter-30mm-length-21mm-sku-60561414/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 12mm outer diameter 30mm length 21mm SKU: 60561412](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-12mm-outer-diameter-30mm-length-21mm-sku-60561412/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 11mm outer diameter 30mm length 21mm SKU: 60561411](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-11mm-outer-diameter-30mm-length-21mm-sku-60561411/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 10mm outer diameter 30mm length 21mm SKU: 60561410](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-10mm-outer-diameter-30mm-length-21mm-sku-60561410/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 8mm outer diameter 30mm length 21mm SKU: 60561408](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-8mm-outer-diameter-30mm-length-21mm-sku-60561408/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 5mm outer diameter 30mm length 21mm SKU: 60561405](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-5mm-outer-diameter-30mm-length-21mm-sku-60561405/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 12mm outer diameter 25mm length 18mm SKU: 60561212](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-12mm-outer-diameter-25mm-length-18mm-sku-60561212/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 11mm outer diameter 25mm length 18mm SKU: 60561211](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-11mm-outer-diameter-25mm-length-18mm-sku-60561211/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Clamp hub for elastic coupling RNKC short backlash-free size 14 borehole 10mm outer diameter 25mm length 18mm SKU: 60561210](https://maedler.in/product/clamp-hub-for-elastic-coupling-rnkc-short-backlash-free-size-14-borehole-10mm-outer-diameter-25mm-length-18mm-sku-60561210/): Material: Coupling hubs: Aluminium. Spider: Polyurethane, hardness 92ºA yellow or 98ºA Shore red.Two coupling hubs combined with an insert of the same size make up a ready-to-install elastic coupling.All components have to be ordered separately.• Zero backlash, insertable elastic coupling in short version.• With clamps, ready-to-install for rapid mounting.Temperature range: -30ºC to +90ºC.1) Standard bore. 2) Other bore sizes as well feather keyways, available against surcharge at short delievery time. - [Leveling foot 344 type A M24 x 98mm long foot diameter 100mm SKU: 65532700](https://maedler.in/product/leveling-foot-344-type-a-m24-x-98mm-long-foot-diameter-100mm-sku-65532700/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M20 x 158mm long foot diameter 100mm SKU: 65532600](https://maedler.in/product/leveling-foot-344-type-a-m20-x-158mm-long-foot-diameter-100mm-sku-65532600/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M20 x 138mm long foot diameter 100mm SKU: 65532500](https://maedler.in/product/leveling-foot-344-type-a-m20-x-138mm-long-foot-diameter-100mm-sku-65532500/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M20 x 98mm long foot diameter 100mm SKU: 65532400](https://maedler.in/product/leveling-foot-344-type-a-m20-x-98mm-long-foot-diameter-100mm-sku-65532400/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M20 x 158mm long foot diameter 80mm SKU: 65532300](https://maedler.in/product/leveling-foot-344-type-a-m20-x-158mm-long-foot-diameter-80mm-sku-65532300/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M20 x 138mm long foot diameter 80mm SKU: 65532200](https://maedler.in/product/leveling-foot-344-type-a-m20-x-138mm-long-foot-diameter-80mm-sku-65532200/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M20 x 98mm long foot diameter 80mm SKU: 65532100](https://maedler.in/product/leveling-foot-344-type-a-m20-x-98mm-long-foot-diameter-80mm-sku-65532100/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M16 x 148mm long foot diameter 80mm SKU: 65531600](https://maedler.in/product/leveling-foot-344-type-a-m16-x-148mm-long-foot-diameter-80mm-sku-65531600/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M16 x 108mm long foot diameter 80mm SKU: 65531500](https://maedler.in/product/leveling-foot-344-type-a-m16-x-108mm-long-foot-diameter-80mm-sku-65531500/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M16 x 68mm long foot diameter 80mm SKU: 65531400](https://maedler.in/product/leveling-foot-344-type-a-m16-x-68mm-long-foot-diameter-80mm-sku-65531400/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M16 x 148mm long foot diameter 60mm SKU: 65531300](https://maedler.in/product/leveling-foot-344-type-a-m16-x-148mm-long-foot-diameter-60mm-sku-65531300/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M16 x 108mm long foot diameter 60mm SKU: 65531200](https://maedler.in/product/leveling-foot-344-type-a-m16-x-108mm-long-foot-diameter-60mm-sku-65531200/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M16 x 68mm long foot diameter 60mm SKU: 65531100](https://maedler.in/product/leveling-foot-344-type-a-m16-x-68mm-long-foot-diameter-60mm-sku-65531100/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M14 x 148mm long foot diameter 60mm SKU: 65531000](https://maedler.in/product/leveling-foot-344-type-a-m14-x-148mm-long-foot-diameter-60mm-sku-65531000/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M14 x 98mm long foot diameter 60mm SKU: 65530900](https://maedler.in/product/leveling-foot-344-type-a-m14-x-98mm-long-foot-diameter-60mm-sku-65530900/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M14 x 68mm long foot diameter 60mm SKU: 65530800](https://maedler.in/product/leveling-foot-344-type-a-m14-x-68mm-long-foot-diameter-60mm-sku-65530800/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M8 x 68mm long foot diameter 60mm SKU: 65530700](https://maedler.in/product/leveling-foot-344-type-a-m8-x-68mm-long-foot-diameter-60mm-sku-65530700/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M12 x 98mm long foot diameter 60mm SKU: 65530600](https://maedler.in/product/leveling-foot-344-type-a-m12-x-98mm-long-foot-diameter-60mm-sku-65530600/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M12 x 68mm long foot diameter 60mm SKU: 65530500](https://maedler.in/product/leveling-foot-344-type-a-m12-x-68mm-long-foot-diameter-60mm-sku-65530500/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M12 x 43mm long foot diameter 60mm SKU: 65530400](https://maedler.in/product/leveling-foot-344-type-a-m12-x-43mm-long-foot-diameter-60mm-sku-65530400/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M10 x 98mm long foot diameter 60mm SKU: 65530300](https://maedler.in/product/leveling-foot-344-type-a-m10-x-98mm-long-foot-diameter-60mm-sku-65530300/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M10 x 68mm long foot diameter 60mm SKU: 65530200](https://maedler.in/product/leveling-foot-344-type-a-m10-x-68mm-long-foot-diameter-60mm-sku-65530200/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M10 x 43mm long foot diameter 60mm SKU: 65530100](https://maedler.in/product/leveling-foot-344-type-a-m10-x-43mm-long-foot-diameter-60mm-sku-65530100/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M8 x 43mm long foot diameter 60mm SKU: 65530000](https://maedler.in/product/leveling-foot-344-type-a-m8-x-43mm-long-foot-diameter-60mm-sku-65530000/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling pad 2259 type D thread M24 pad made from POM SKU: 65524400](https://maedler.in/product/leveling-pad-2259-type-d-thread-m24-pad-made-from-pom-sku-65524400/): Material type D: Ball bearing: Stainless steel 1.4305 (AISI 303). Pad: Plastic, white (POM). Maximum temperature +80°C. - [Leveling pad 2259 type D thread M20 pad made from POM SKU: 65524000](https://maedler.in/product/leveling-pad-2259-type-d-thread-m20-pad-made-from-pom-sku-65524000/): Material type D: Ball bearing: Stainless steel 1.4305 (AISI 303). Pad: Plastic, white (POM). Maximum temperature +80°C. - [Leveling pad 2259 type D thread M16 pad made from POM SKU: 65523600](https://maedler.in/product/leveling-pad-2259-type-d-thread-m16-pad-made-from-pom-sku-65523600/): Material type D: Ball bearing: Stainless steel 1.4305 (AISI 303). Pad: Plastic, white (POM). Maximum temperature +80°C. - [Leveling pad 2259 type D thread M12 pad made from POM SKU: 65523200](https://maedler.in/product/leveling-pad-2259-type-d-thread-m12-pad-made-from-pom-sku-65523200/): Material type D: Ball bearing: Stainless steel 1.4305 (AISI 303). Pad: Plastic, white (POM). Maximum temperature +80°C. - [Leveling pad 2259 type D thread M10 pad made from POM SKU: 65523000](https://maedler.in/product/leveling-pad-2259-type-d-thread-m10-pad-made-from-pom-sku-65523000/): Material type D: Ball bearing: Stainless steel 1.4305 (AISI 303). Pad: Plastic, white (POM). Maximum temperature +80°C. - [Leveling pad 2259 type D thread M 8 pad made from POM SKU: 65522800](https://maedler.in/product/leveling-pad-2259-type-d-thread-m-8-pad-made-from-pom-sku-65522800/): Material type D: Ball bearing: Stainless steel 1.4305 (AISI 303). Pad: Plastic, white (POM). Maximum temperature +80°C. - [Leveling pad 2259 type D thread M 6 pad made from POM SKU: 65522600](https://maedler.in/product/leveling-pad-2259-type-d-thread-m-6-pad-made-from-pom-sku-65522600/): Material type D: Ball bearing: Stainless steel 1.4305 (AISI 303). Pad: Plastic, white (POM). Maximum temperature +80°C. - [Rubber pad for levelling pad 2259 thread size M24 SKU: 65522499](https://maedler.in/product/rubber-pad-for-levelling-pad-2259-thread-size-m24-sku-65522499/): Material: Rubber NBR, black, 85º +/-5º Shore A. Oil-resistant rubber pads for levelling pads 2259. The bottom side is profiled. The rubber pad can easily be pulled over and enables an anti-slip and vibration-damping placement of the levelling pad. - [Leveling pad 2259 type NG thread M24 bolt length 200mm stainless steel 1.4301 (AISI 304) SKU: 65522492](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m24-bolt-length-200mm-stainless-steel-1-4301-aisi-304-sku-65522492/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type NG thread M24 bolt length 100mm stainless steel 1.4301 (AISI 304) SKU: 65522491](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m24-bolt-length-100mm-stainless-steel-1-4301-aisi-304-sku-65522491/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type AG thread M24 bolt length 200mm steel black oxide finished SKU: 65522402](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m24-bolt-length-200mm-steel-black-oxide-finished-sku-65522402/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type AG thread M24 bolt length 100mm steel black oxide finished SKU: 65522401](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m24-bolt-length-100mm-steel-black-oxide-finished-sku-65522401/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type A thread M24 pad made from steel, quenched and tempered SKU: 65522400](https://maedler.in/product/leveling-pad-2259-type-a-thread-m24-pad-made-from-steel-quenched-and-tempered-sku-65522400/): Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Rubber pad for levelling pad 2259 thread size M20 SKU: 65522099](https://maedler.in/product/rubber-pad-for-levelling-pad-2259-thread-size-m20-sku-65522099/): Material: Rubber NBR, black, 85º +/-5º Shore A. Oil-resistant rubber pads for levelling pads 2259. The bottom side is profiled. The rubber pad can easily be pulled over and enables an anti-slip and vibration-damping placement of the levelling pad. - [Leveling pad 2259 type NG thread M20 bolt length 200mm stainless steel 1.4301 (AISI 304) SKU: 65522092](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m20-bolt-length-200mm-stainless-steel-1-4301-aisi-304-sku-65522092/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type NG thread M20 bolt length 100mm stainless steel 1.4301 (AISI 304) SKU: 65522091](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m20-bolt-length-100mm-stainless-steel-1-4301-aisi-304-sku-65522091/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type AG thread M20 bolt length 200mm steel black oxide finished SKU: 65522002](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m20-bolt-length-200mm-steel-black-oxide-finished-sku-65522002/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type AG thread M20 bolt length 100mm steel black oxide finished SKU: 65522001](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m20-bolt-length-100mm-steel-black-oxide-finished-sku-65522001/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type A thread M20 pad made from steel, quenched and tempered SKU: 65522000](https://maedler.in/product/leveling-pad-2259-type-a-thread-m20-pad-made-from-steel-quenched-and-tempered-sku-65522000/): Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Rubber pad for levelling pad 2259 thread size M16 SKU: 65521699](https://maedler.in/product/rubber-pad-for-levelling-pad-2259-thread-size-m16-sku-65521699/): Material: Rubber NBR, black, 85º +/-5º Shore A. Oil-resistant rubber pads for levelling pads 2259. The bottom side is profiled. The rubber pad can easily be pulled over and enables an anti-slip and vibration-damping placement of the levelling pad. - [Leveling pad 2259 type NG thread M16 bolt length 200mm stainless steel 1.4301 (AISI 304) SKU: 65521692](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m16-bolt-length-200mm-stainless-steel-1-4301-aisi-304-sku-65521692/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type NG thread M16 bolt length 100mm stainless steel 1.4301 (AISI 304) SKU: 65521691](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m16-bolt-length-100mm-stainless-steel-1-4301-aisi-304-sku-65521691/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type AG thread M16 bolt length 200mm steel black oxide finished SKU: 65521602](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m16-bolt-length-200mm-steel-black-oxide-finished-sku-65521602/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type AG thread M16 bolt length 100mm steel black oxide finished SKU: 65521601](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m16-bolt-length-100mm-steel-black-oxide-finished-sku-65521601/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type A thread M16 pad made from steel, quenched and tempered SKU: 65521600](https://maedler.in/product/leveling-pad-2259-type-a-thread-m16-pad-made-from-steel-quenched-and-tempered-sku-65521600/): Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Rubber pad for levelling pad 2259 thread size M12 SKU: 65521299](https://maedler.in/product/rubber-pad-for-levelling-pad-2259-thread-size-m12-sku-65521299/): Material: Rubber NBR, black, 85º +/-5º Shore A. Oil-resistant rubber pads for levelling pads 2259. The bottom side is profiled. The rubber pad can easily be pulled over and enables an anti-slip and vibration-damping placement of the levelling pad. - [Leveling pad 2259 type NG thread M12 bolt length 150mm stainless steel 1.4301 (AISI 304) SKU: 65521292](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m12-bolt-length-150mm-stainless-steel-1-4301-aisi-304-sku-65521292/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type NG thread M12 bolt length 100mm stainless steel 1.4301 (AISI 304) SKU: 65521291](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m12-bolt-length-100mm-stainless-steel-1-4301-aisi-304-sku-65521291/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type AG thread M12 bolt length 150mm steel black oxide finished SKU: 65521202](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m12-bolt-length-150mm-steel-black-oxide-finished-sku-65521202/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type AG thread M12 bolt length 100mm steel black oxide finished SKU: 65521201](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m12-bolt-length-100mm-steel-black-oxide-finished-sku-65521201/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type A thread M12 pad made from steel, quenched and tempered SKU: 65521200](https://maedler.in/product/leveling-pad-2259-type-a-thread-m12-pad-made-from-steel-quenched-and-tempered-sku-65521200/): Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Rubber pad for levelling pad 2259 thread size M10 SKU: 65521099](https://maedler.in/product/rubber-pad-for-levelling-pad-2259-thread-size-m10-sku-65521099/): Material: Rubber NBR, black, 85º +/-5º Shore A. Oil-resistant rubber pads for levelling pads 2259. The bottom side is profiled. The rubber pad can easily be pulled over and enables an anti-slip and vibration-damping placement of the levelling pad. - [Leveling pad 2259 type NG thread M10 bolt length 150mm stainless steel 1.4301 (AISI 304) SKU: 65521092](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m10-bolt-length-150mm-stainless-steel-1-4301-aisi-304-sku-65521092/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type NG thread M10 bolt length 100mm stainless steel 1.4301 (AISI 304) SKU: 65521091](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m10-bolt-length-100mm-stainless-steel-1-4301-aisi-304-sku-65521091/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type AG thread M10 bolt length 150mm steel black oxide finished SKU: 65521002](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m10-bolt-length-150mm-steel-black-oxide-finished-sku-65521002/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type AG thread M10 bolt length 100mm steel black oxide finished SKU: 65521001](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m10-bolt-length-100mm-steel-black-oxide-finished-sku-65521001/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type A thread M10 pad made from steel, quenched and tempered SKU: 65521000](https://maedler.in/product/leveling-pad-2259-type-a-thread-m10-pad-made-from-steel-quenched-and-tempered-sku-65521000/): Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Rubber pad for levelling pad 2259 thread size M8 SKU: 65520899](https://maedler.in/product/rubber-pad-for-levelling-pad-2259-thread-size-m8-sku-65520899/): Material: Rubber NBR, black, 85º +/-5º Shore A. Oil-resistant rubber pads for levelling pads 2259. The bottom side is profiled. The rubber pad can easily be pulled over and enables an anti-slip and vibration-damping placement of the levelling pad. - [Leveling pad 2259 type NG thread M8 bolt length 80mm stainless steel 1.4301 (AISI 304) SKU: 65520891](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m8-bolt-length-80mm-stainless-steel-1-4301-aisi-304-sku-65520891/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type AG thread M8 bolt length 80mm steel black oxide finished SKU: 65520801](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m8-bolt-length-80mm-steel-black-oxide-finished-sku-65520801/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type A thread M8 pad made from steel, quenched and tempered SKU: 65520800](https://maedler.in/product/leveling-pad-2259-type-a-thread-m8-pad-made-from-steel-quenched-and-tempered-sku-65520800/): Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Rubber pad for levelling pad 2259 thread size M6 SKU: 65520699](https://maedler.in/product/rubber-pad-for-levelling-pad-2259-thread-size-m6-sku-65520699/): Material: Rubber NBR, black, 85º +/-5º Shore A. Oil-resistant rubber pads for levelling pads 2259. The bottom side is profiled. The rubber pad can easily be pulled over and enables an anti-slip and vibration-damping placement of the levelling pad. - [Leveling pad 2259 type NG thread M6 bolt length 60mm stainless steel 1.4301 (AISI 304) SKU: 65520691](https://maedler.in/product/leveling-pad-2259-type-ng-thread-m6-bolt-length-60mm-stainless-steel-1-4301-aisi-304-sku-65520691/): Material Type NG: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type AG thread M6 bolt length 60mm steel black oxide finished SKU: 65520601](https://maedler.in/product/leveling-pad-2259-type-ag-thread-m6-bolt-length-60mm-steel-black-oxide-finished-sku-65520601/): Material type AG: Ball with threated bolt: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Leveling pad 2259 type A thread M6 pad made from steel, quenched and tempered SKU: 65520600](https://maedler.in/product/leveling-pad-2259-type-a-thread-m6-pad-made-from-steel-quenched-and-tempered-sku-65520600/): Material type A: Ball bearing: free cutting steel, induction hardened, black oxide finish. Pad: steel, heat-treated, black oxide finish. - [Stud screw DIN 6379 quality 8.8 M36 x 400mm SKU: 655136400](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m36-x-400mm-sku-655136400/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M36 x 250mm SKU: 655136250](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m36-x-250mm-sku-655136250/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M36 x 160mm SKU: 655136160](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m36-x-160mm-sku-655136160/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M30 x 500mm SKU: 655130500](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m30-x-500mm-sku-655130500/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M30 x 315mm SKU: 655130315](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m30-x-315mm-sku-655130315/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M30 x 200mm SKU: 655130200](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m30-x-200mm-sku-655130200/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M30 x 125mm SKU: 655130125](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m30-x-125mm-sku-655130125/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M24 x 400mm SKU: 655124400](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m24-x-400mm-sku-655124400/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M24 x 315mm SKU: 655124315](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m24-x-315mm-sku-655124315/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M24 x 250mm SKU: 655124250](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m24-x-250mm-sku-655124250/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M24 x 200mm SKU: 655124200](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m24-x-200mm-sku-655124200/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M24 x 160mm SKU: 655124160](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m24-x-160mm-sku-655124160/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M24 x 125mm SKU: 655124125](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m24-x-125mm-sku-655124125/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M24 x 100mm SKU: 655124100](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m24-x-100mm-sku-655124100/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M20 x 500mm SKU: 655120500](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m20-x-500mm-sku-655120500/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M20 x 400mm SKU: 655120400](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m20-x-400mm-sku-655120400/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M20 x 315mm SKU: 655120315](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m20-x-315mm-sku-655120315/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M20 x 250mm SKU: 655120250](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m20-x-250mm-sku-655120250/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M20 x 200mm SKU: 655120200](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m20-x-200mm-sku-655120200/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M20 x 160mm SKU: 655120160](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m20-x-160mm-sku-655120160/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M20 x 125mm SKU: 655120125](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m20-x-125mm-sku-655120125/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M20 x 80mm SKU: 655120080](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m20-x-80mm-sku-655120080/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M16 x 500mm SKU: 655116500](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m16-x-500mm-sku-655116500/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M16 x 315mm SKU: 655116315](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m16-x-315mm-sku-655116315/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M16 x 250mm SKU: 655116250](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m16-x-250mm-sku-655116250/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M16 x 200mm SKU: 655116200](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m16-x-200mm-sku-655116200/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M16 x 160mm SKU: 655116160](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m16-x-160mm-sku-655116160/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M16 x 125mm SKU: 655116125](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m16-x-125mm-sku-655116125/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M16 x 100mm SKU: 655116100](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m16-x-100mm-sku-655116100/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M16 x 80mm SKU: 655116080](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m16-x-80mm-sku-655116080/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Stud screw DIN 6379 quality 8.8 M16 x 63mm SKU: 655116063](https://maedler.in/product/stud-screw-din-6379-quality-8-8-m16-x-63mm-sku-655116063/): Material: Tempered steel, black oxide finish. Thread rolled. Tensile strength: Up to M12: strength 10.9. From M14: strength 8.8. Suitable for Tee Nuts DIN 508 or as studs for mounting a housing. More sizes up to M36 x 700mm on request. * These dimensions are not part of the DIN. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582020](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582020/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581935](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581935/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581930](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581930/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581925](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581925/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 19 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581920](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-19-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581920/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581835](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581835/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581830](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581830/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581820](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581820/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581730](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581730/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581720](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581720/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581718](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581718/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 17 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581716](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-17-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581716/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581620](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581620/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 18H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581618](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-18h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581618/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 16 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581616](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-16-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581616/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581516](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581516/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 15 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581515](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-15-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581515/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581416](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581416/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 14 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581415](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-14-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581415/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581316](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581316/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581315](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581315/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 13 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581314](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-13-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581314/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581216](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581216/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581215](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581215/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581214](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581214/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 12 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581212](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-12-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581212/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 16H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581116](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-16h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581116/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 15H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581115](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-15h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581115/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 14H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581114](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-14h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581114/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 11 teeth material steel bore 12H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12581112](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-11-teeth-material-steel-bore-12h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12581112/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 08 B-1 25 teeth material steel for taper-bush 2012 SKU: 12577425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-for-taper-bush-2012-sku-12577425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 23 teeth material steel for taper-bush 1610 SKU: 12577423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-for-taper-bush-1610-sku-12577423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 21 teeth material steel for taper-bush 1610 SKU: 12577421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-for-taper-bush-1610-sku-12577421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 20 teeth material steel for taper-bush 1210 SKU: 12577420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-for-taper-bush-1210-sku-12577420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 19 teeth material steel for taper-bush 1210 SKU: 12577419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-for-taper-bush-1210-sku-12577419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 18 teeth material steel for taper-bush 1210 SKU: 12577418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-for-taper-bush-1210-sku-12577418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 17 teeth material steel for taper-bush 1108 SKU: 12577417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-for-taper-bush-1108-sku-12577417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 16 teeth material steel for taper-bush 1108 SKU: 12577416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-for-taper-bush-1108-sku-12577416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 08 B-1 15 teeth material steel for taper-bush 1008 SKU: 12577415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-for-taper-bush-1008-sku-12577415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 114 teeth material cast iron for taper bush type 2517 SKU: 12577188G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-114-teeth-material-cast-iron-for-taper-bush-type-2517-sku-12577188g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 114 teeth material steel for taper bush type 2517 SKU: 12577188](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-114-teeth-material-steel-for-taper-bush-type-2517-sku-12577188/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 95 teeth material cast iron for taper bush type 2012 SKU: 12577183G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-95-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 76 teeth material cast iron for taper bush type 2012 SKU: 12577176G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-76-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 57 teeth material cast iron for taper bush type 2012 SKU: 12577157G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-57-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 45 teeth material cast iron for taper bush type 2012 SKU: 12577145G](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-45-teeth-material-cast-iron-for-taper-bush-type-2012-sku-12577145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 45 teeth material steel for taper bush type 2012 SKU: 12577145](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-45-teeth-material-steel-for-taper-bush-type-2012-sku-12577145/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 38 teeth material steel for taper bush type 2012 SKU: 12577138](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-38-teeth-material-steel-for-taper-bush-type-2012-sku-12577138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 30 teeth material steel for taper bush type 2012 SKU: 12577130](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-30-teeth-material-steel-for-taper-bush-type-2012-sku-12577130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 28 teeth material steel for taper bush type 2012 SKU: 12577128](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-28-teeth-material-steel-for-taper-bush-type-2012-sku-12577128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 27 teeth material steel for taper bush type 2012 SKU: 12577127](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-27-teeth-material-steel-for-taper-bush-type-2012-sku-12577127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 26 teeth material steel for taper bush type 2012 SKU: 12577126](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-26-teeth-material-steel-for-taper-bush-type-2012-sku-12577126/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 25 teeth material steel for taper bush type 2012 SKU: 12577125](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-25-teeth-material-steel-for-taper-bush-type-2012-sku-12577125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 24 teeth material steel for taper bush type 2012 SKU: 12577124](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-24-teeth-material-steel-for-taper-bush-type-2012-sku-12577124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 23 teeth material steel for taper bush type 1610 SKU: 12577123](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-23-teeth-material-steel-for-taper-bush-type-1610-sku-12577123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 22 teeth material steel for taper bush type 1610 SKU: 12577122](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-22-teeth-material-steel-for-taper-bush-type-1610-sku-12577122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 21 teeth material steel for taper bush type 1610 SKU: 12577121](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-21-teeth-material-steel-for-taper-bush-type-1610-sku-12577121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 20 teeth material steel for taper bush type 1610 SKU: 12577120](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-20-teeth-material-steel-for-taper-bush-type-1610-sku-12577120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 19 teeth material steel for taper bush type 1210 SKU: 12577119](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-19-teeth-material-steel-for-taper-bush-type-1210-sku-12577119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 18 teeth material steel for taper bush type 1210 SKU: 12577118](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-18-teeth-material-steel-for-taper-bush-type-1210-sku-12577118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 17 teeth material steel for taper bush type 1210 SKU: 12577117](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-17-teeth-material-steel-for-taper-bush-type-1210-sku-12577117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 16 teeth material steel for taper bush type 1108 SKU: 12577116](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-16-teeth-material-steel-for-taper-bush-type-1108-sku-12577116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 08 B-2 1/2x5/16" 15 teeth material steel for taper bush type 1008 SKU: 12577115](https://maedler.in/product/double-strand-sprocket-zrt-08-b-2-1-2x5-16-15-teeth-material-steel-for-taper-bush-type-1008-sku-12577115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 7,2 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 08 B-1 25 teeth material steel SKU: 12542500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-sku-12542500/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 23 teeth material steel SKU: 12542300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-sku-12542300/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 21 teeth material steel SKU: 12542100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-sku-12542100/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 20 teeth material steel SKU: 12542000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-sku-12542000/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 19 teeth material steel SKU: 12541900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-sku-12541900/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 18 teeth material steel SKU: 12541800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-sku-12541800/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 17 teeth material steel SKU: 12541700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-sku-12541700/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 16 teeth material steel SKU: 12541600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-sku-12541600/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 15 teeth material steel SKU: 12541500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-sku-12541500/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 14 teeth material steel SKU: 12541400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-14-teeth-material-steel-sku-12541400/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 13 teeth material steel SKU: 12541300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-13-teeth-material-steel-sku-12541300/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 08 B-1 12 teeth material steel SKU: 12541200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-08-b-1-12-teeth-material-steel-sku-12541200/): Material: Steel C45. Pre-bored. Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 114 teeth material steel SKU: 12528800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-114-teeth-material-steel-sku-12528800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 95 teeth material steel SKU: 12528300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-95-teeth-material-steel-sku-12528300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 76 teeth material steel SKU: 12527600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-76-teeth-material-steel-sku-12527600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 57 teeth material steel SKU: 12525700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-57-teeth-material-steel-sku-12525700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 54 teeth material steel SKU: 12525400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-54-teeth-material-steel-sku-12525400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 48 teeth material steel SKU: 12524800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-48-teeth-material-steel-sku-12524800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 45 teeth material steel SKU: 12524500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-45-teeth-material-steel-sku-12524500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 40 teeth material steel SKU: 12524000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-40-teeth-material-steel-sku-12524000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 38 teeth material steel SKU: 12523800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-38-teeth-material-steel-sku-12523800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 36 teeth material steel SKU: 12523600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-36-teeth-material-steel-sku-12523600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 35 teeth material steel SKU: 12523500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-35-teeth-material-steel-sku-12523500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 32 teeth material steel SKU: 12523200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-32-teeth-material-steel-sku-12523200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 30 teeth material steel SKU: 12523000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-30-teeth-material-steel-sku-12523000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 28 teeth material steel SKU: 12522800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-28-teeth-material-steel-sku-12522800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 27 teeth material steel SKU: 12522700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-27-teeth-material-steel-sku-12522700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 26 teeth material steel SKU: 12522600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-08-b-2-1-2x5-16-26-teeth-material-steel-sku-12522600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Locking assembly COM-AS bore 45mm size 45x75x24mm SKU: 61530045](https://maedler.in/product/locking-assembly-com-as-bore-45mm-size-45x75x24mm-sku-61530045/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 35mm size 35x60x20mm SKU: 61530035](https://maedler.in/product/locking-assembly-com-as-bore-35mm-size-35x60x20mm-sku-61530035/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Very short version. Also suitable for small hub diameters. Not self-centering. Not self-locking. Axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Like COM-A, but with slotted pressure rings. Not self-centering. Self-releasing at dismounting. No axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 32mm size 32x60x20mm SKU: 61530032](https://maedler.in/product/locking-assembly-com-as-bore-32mm-size-32x60x20mm-sku-61530032/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 28mm size 28x55x20mm SKU: 61530028](https://maedler.in/product/locking-assembly-com-as-bore-28mm-size-28x55x20mm-sku-61530028/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 24mm size 24x50x20mm SKU: 61530024](https://maedler.in/product/locking-assembly-com-as-bore-24mm-size-24x50x20mm-sku-61530024/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 20mm size 20x47x20mm SKU: 61530020](https://maedler.in/product/locking-assembly-com-as-bore-20mm-size-20x47x20mm-sku-61530020/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 19mm size 19x47x20mm SKU: 61530019](https://maedler.in/product/locking-assembly-com-as-bore-19mm-size-19x47x20mm-sku-61530019/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 16mm size 16-44 SKU: 61530016](https://maedler.in/product/locking-assembly-com-as-bore-16mm-size-16-44-sku-61530016/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 15mm size 15-42 SKU: 61530015](https://maedler.in/product/locking-assembly-com-as-bore-15mm-size-15-42-sku-61530015/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Safety clutch SI size 50 torque 60 - 180 Nm SKU: 61275000](https://maedler.in/product/safety-clutch-si-size-50-torque-60-180-nm-sku-61275000/): Material: Steel. This clutch is a backlash-free overload system operating on the positive principle. It works with the recently developed principle of the punched disk spring. At overload the disk spring disengages, the torque flow is interrupted. After the overload has passed, the clutch re-engages on its own. The axial movement of the shift ring can be used to trigger a limit switch/sensor turning off the engine (travel 2mm). Customer components (e.g. sprockets, pulleys) can be easily integrated; special components, as needed for the common systems, are not required here. Customized bores and feather-key grooves available at surcharge. - [Safety clutch SI size 35 torque 25 - 80 Nm SKU: 61273500](https://maedler.in/product/safety-clutch-si-size-35-torque-25-80-nm-sku-61273500/): Material: Steel. This clutch is a backlash-free overload system operating on the positive principle. It works with the recently developed principle of the punched disk spring. At overload the disk spring disengages, the torque flow is interrupted. After the overload has passed, the clutch re-engages on its own. The axial movement of the shift ring can be used to trigger a limit switch/sensor turning off the engine (travel 2mm). Customer components (e.g. sprockets, pulleys) can be easily integrated; special components, as needed for the common systems, are not required here. Customized bores and feather-key grooves available at surcharge. - [Safety clutch SI size 25 torque 20 - 60 Nm SKU: 61272500](https://maedler.in/product/safety-clutch-si-size-25-torque-20-60-nm-sku-61272500/): Material: Steel. This clutch is a backlash-free overload system operating on the positive principle. It works with the recently developed principle of the punched disk spring. At overload the disk spring disengages, the torque flow is interrupted. After the overload has passed, the clutch re-engages on its own. The axial movement of the shift ring can be used to trigger a limit switch/sensor turning off the engine (travel 2mm). Customer components (e.g. sprockets, pulleys) can be easily integrated; special components, as needed for the common systems, are not required here. Customized bores and feather-key grooves available at surcharge. - [Safety clutch SI size 20 torque 6 - 20 Nm SKU: 61272000](https://maedler.in/product/safety-clutch-si-size-20-torque-6-20-nm-sku-61272000/): Material: Steel. This clutch is a backlash-free overload system operating on the positive principle. It works with the recently developed principle of the punched disk spring. At overload the disk spring disengages, the torque flow is interrupted. After the overload has passed, the clutch re-engages on its own. The axial movement of the shift ring can be used to trigger a limit switch/sensor turning off the engine (travel 2mm). Customer components (e.g. sprockets, pulleys) can be easily integrated; special components, as needed for the common systems, are not required here. Customized bores and feather-key grooves available at surcharge. - [Limit switch for safety clutch 220-250 V AC SKU: 61260500](https://maedler.in/product/limit-switch-for-safety-clutch-220-250-v-ac-sku-61260500/): Material: Housing made from aluminium die-cast, painted grey, with rubber seal. Switch made from brass. Bellow made from neoprene (black). Housing screws zinc-plated. Cable connection made from plastic (grey). Electrical connection: 220-250V AC, 10 A. Application: Robust limit switch for safety clutches SI, safety clutches CM or similar applications. If the torque set on the clutch is exceeded, the clutch slips. At the same time the shift ring moves. The shift ring then triggers the switch and turns off the engine. This protects the entire drive system and prevents possible damage. Mounting: On the back wall are two bores Ø 4.3 mm. These fit two screws M4 with internal hexagon, slot or cross recess (head-Ø up to 7 mm). The wall thickness around the mounting holes is 8 mm. - [Sliding hub FA-K size 2 torque adjustable 25-140Nm outer diameter 88mm max. bore: 40mm with clamp hub SKU: 61211200](https://maedler.in/product/sliding-hub-fa-k-size-2-torque-adjustable-25-140nm-outer-diameter-88mm-max-bore-40mm-with-clamp-hub-sku-61211200/): Material: Steel, zinc-plated and chromated.• Clamp hub version.• The slipping torque can be adjusted with common assembly tools for screws, also after mounting.• By mounting an additional springs the torque range can be increased (additional spring has to be ordered separately).• The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. - [Sliding hub FA-K size 1 torque adjustable 20-75Nm outer diameter 68mm max. bore: 28mm with clamp hub SKU: 61211110](https://maedler.in/product/sliding-hub-fa-k-size-1-torque-adjustable-20-75nm-outer-diameter-68mm-max-bore-28mm-with-clamp-hub-sku-61211110/): Material: Steel, zinc-plated and chromated.• Clamp hub version.• The slipping torque can be adjusted with common assembly tools for screws, also after mounting.• By mounting an additional springs the torque range can be increased (additional spring has to be ordered separately).• The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. - [Sliding hub FA-K size 01 torque adjustable 5-35Nm outer diameter 58mm max. bore: 25mm with clamp hub SKU: 61211100](https://maedler.in/product/sliding-hub-fa-k-size-01-torque-adjustable-5-35nm-outer-diameter-58mm-max-bore-25mm-with-clamp-hub-sku-61211100/): Material: Steel, zinc-plated and chromated.• Clamp hub version.• The slipping torque can be adjusted with common assembly tools for screws, also after mounting.• By mounting an additional springs the torque range can be increased (additional spring has to be ordered separately).• The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. - [Sliding hub FA-K size 0 torque adjustable 2-10Nm outer diameter 45mm max. bore: 22mm with clamp hub SKU: 61211010](https://maedler.in/product/sliding-hub-fa-k-size-0-torque-adjustable-2-10nm-outer-diameter-45mm-max-bore-22mm-with-clamp-hub-sku-61211010/): Material: Steel, zinc-plated and chromated.• Clamp hub version.• The slipping torque can be adjusted with common assembly tools for screws, also after mounting.• By mounting an additional springs the torque range can be increased (additional spring has to be ordered separately).• The hubs are delivered with pilt bore and max. bush length. Customized bores, keyways and bush lengths at extra charge. - [Spare lamellas for friction clutch PD no. 611 006 00 consisting of 6 inner lamellas, 5 outer lamellas and pressure disc SKU: 61101600](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-006-00-consisting-of-6-inner-lamellas-5-outer-lamellas-and-pressure-disc-sku-61101600/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 005 00 consisting of 5 inner lamellas, 4 outer lamellas and pressure disc SKU: 61101500](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-005-00-consisting-of-5-inner-lamellas-4-outer-lamellas-and-pressure-disc-sku-61101500/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 004 00 consisting of 8 inner lamellas, 7 outer lamellas and pressure disc SKU: 61101400](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-004-00-consisting-of-8-inner-lamellas-7-outer-lamellas-and-pressure-disc-sku-61101400/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 003 00 consisting of 8 inner lamellas, 7 outer lamellas and pressure disc SKU: 61101300](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-003-00-consisting-of-8-inner-lamellas-7-outer-lamellas-and-pressure-disc-sku-61101300/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 002 00 consisting of 7 inner lamellas, 6 outer lamellas and pressure disc SKU: 61101200](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-002-00-consisting-of-7-inner-lamellas-6-outer-lamellas-and-pressure-disc-sku-61101200/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Spare lamellas for friction clutch PD no. 611 001 00 consisting of 5 inner lamellas, 4 outer lamellas and pressure disc SKU: 61101100](https://maedler.in/product/spare-lamellas-for-friction-clutch-pd-no-611-001-00-consisting-of-5-inner-lamellas-4-outer-lamellas-and-pressure-disc-sku-61101100/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 380 Nm outer diameter 145mm pilot bore 25mm max. bore 70mm SKU: 61100600](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-380-nm-outer-diameter-145mm-pilot-bore-25mm-max-bore-70mm-sku-61100600/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 230 Nm outer diameter 120mm pilot bore 25mm max. bore 55mm SKU: 61100500](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-230-nm-outer-diameter-120mm-pilot-bore-25mm-max-bore-55mm-sku-61100500/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 126 Nm outer diameter 100mm pilot bore 25mm max. bore 42mm SKU: 61100400](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-126-nm-outer-diameter-100mm-pilot-bore-25mm-max-bore-42mm-sku-61100400/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 62 Nm outer diameter 82mm pilot bore 12mm max. bore 40mm SKU: 61100300](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-62-nm-outer-diameter-82mm-pilot-bore-12mm-max-bore-40mm-sku-61100300/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 33 Nm outer diameter 67mm pilot bore 12mm max. bore 25mm SKU: 61100200](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-33-nm-outer-diameter-67mm-pilot-bore-12mm-max-bore-25mm-sku-61100200/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch PD torque adjustable up to 14 Nm outer diameter 55mm pilot bore 10mm max. bore 20mm SKU: 61100100](https://maedler.in/product/friction-clutch-pd-torque-adjustable-up-to-14-nm-outer-diameter-55mm-pilot-bore-10mm-max-bore-20mm-sku-61100100/): Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge. - [Friction clutch R2 with 6 friction lamellas type C bore 8mm SKU: 61044900](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-c-bore-8mm-sku-61044900/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts with shaft misalignement. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type C bore 6mm SKU: 61044800](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-c-bore-6mm-sku-61044800/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts with shaft misalignement. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type C bore 8mm SKU: 61044400](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-c-bore-8mm-sku-61044400/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts with shaft misalignement. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type C bore 6mm SKU: 61044300](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-c-bore-6mm-sku-61044300/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts with shaft misalignement. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type B bore 8mm SKU: 61042900](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-b-bore-8mm-sku-61042900/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type B bore 6mm SKU: 61042800](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-b-bore-6mm-sku-61042800/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type B bore 8mm SKU: 61042400](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-b-bore-8mm-sku-61042400/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type B bore 6mm SKU: 61042300](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-b-bore-6mm-sku-61042300/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type A bore 8mm SKU: 61040900](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-a-bore-8mm-sku-61040900/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 6 friction lamellas type A bore 6mm SKU: 61040800](https://maedler.in/product/friction-clutch-r2-with-6-friction-lamellas-type-a-bore-6mm-sku-61040800/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type A bore 8mm SKU: 61040400](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-a-bore-8mm-sku-61040400/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [Friction clutch R2 with 2 friction lamellas type A bore 6mm SKU: 61040300](https://maedler.in/product/friction-clutch-r2-with-2-friction-lamellas-type-a-bore-6mm-sku-61040300/): Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. As sliding hub for a driving wheel, for concentric arrangement. The driving wheel hasto be mounted and bonded by the customer on the outer diameter 21.97mm +0/-0,02mm. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring - screwed to the outer body - serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm shielded on both sides SKU: 609-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-shielded-on-both-sides-sku-609-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm shielded on both sides clearance C3 SKU: 609-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-shielded-on-both-sides-clearance-c3-sku-609-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm sealed on both sides SKU: 609-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-sealed-on-both-sides-sku-609-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm sealed on both sides SKU: 609-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-sealed-on-both-sides-sku-609-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm sealed on both sides clearance C3 SKU: 609-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-sealed-on-both-sides-clearance-c3-sku-609-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 9mm outer diameter 24mm width 7mm shielded on both sides SKU: 609-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-9mm-outer-diameter-24mm-width-7mm-shielded-on-both-sides-sku-609-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm shielded on both sides SKU: 608-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-sku-608-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm shielded on both sides clearance C3 SKU: 608-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-clearance-c3-sku-608-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm sealed on both sides SKU: 608-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-sku-608-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm sealed on both sides SKU: 608-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-sku-608-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm sealed on both sides clearance C3 SKU: 608-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-clearance-c3-sku-608-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm sealed on both sides clearance C3 SKU: 608-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-sealed-on-both-sides-clearance-c3-sku-608-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm shielded on both sides SKU: 608-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-sku-608-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm shielded on both sides clearance C3 SKU: 608-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-shielded-on-both-sides-clearance-c3-sku-608-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 8mm outer diameter 22mm width 7mm open (unsealed) SKU: 608-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-8mm-outer-diameter-22mm-width-7mm-open-unsealed-sku-608-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [Hub part for toothed coupling BOS II size 48 bore 40mm with keyway sintered metal hub diameter 68mm length 45mm SKU: 60764840](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-bore-40mm-with-keyway-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764840/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 48 bore 38mm with keyway sintered metal hub diameter 68mm length 45mm SKU: 60764838](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-bore-38mm-with-keyway-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764838/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 48 bore 35mm with keyway sintered metal hub diameter 68mm length 45mm SKU: 60764835](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-bore-35mm-with-keyway-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764835/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 48 bore 30mm with keyway sintered metal hub diameter 68mm length 45mm SKU: 60764830](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-bore-30mm-with-keyway-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764830/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 48 prebored 12mm sintered metal hub diameter 68mm length 45mm SKU: 60764801](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-48-prebored-12mm-sintered-metal-hub-diameter-68mm-length-45mm-sku-60764801/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 48 outside diameter 98mm length 50mm SKU: 60764800](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-48-outside-diameter-98mm-length-50mm-sku-60764800/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 bore 38mm with keyway sintered metal hub diameter 68mm length 38mm SKU: 60764238](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-bore-38mm-with-keyway-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764238/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 bore 35mm with keyway sintered metal hub diameter 68mm length 38mm SKU: 60764235](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-bore-35mm-with-keyway-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764235/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 bore 30mm with keyway sintered metal hub diameter 68mm length 38mm SKU: 60764230](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-bore-30mm-with-keyway-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764230/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 bore 25mm with keyway sintered metal hub diameter 68mm length 38mm SKU: 60764225](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-bore-25mm-with-keyway-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764225/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 42 prebored 12mm sintered metal hub diameter 68mm length 38mm SKU: 60764201](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-42-prebored-12mm-sintered-metal-hub-diameter-68mm-length-38mm-sku-60764201/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 42 outside diameter 92mm length 50mm SKU: 60764200](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-42-outside-diameter-92mm-length-50mm-sku-60764200/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 30mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763830](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-30mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763830/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 25mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763825](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-25mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763825/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 22mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763822](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-22mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763822/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 20mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763820](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-20mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763820/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 bore 19mm with keyway sintered metal hub diameter 58mm length 35mm SKU: 60763819](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-bore-19mm-with-keyway-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763819/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 38 prebored 12mm sintered metal hub diameter 58mm length 35mm SKU: 60763801](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-38-prebored-12mm-sintered-metal-hub-diameter-58mm-length-35mm-sku-60763801/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 38 outside diameter 83mm length 48mm SKU: 60763800](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-38-outside-diameter-83mm-length-48mm-sku-60763800/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 25mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763225](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-25mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763225/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 24mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763224](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-24mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763224/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 22mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763222](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-22mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763222/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 20mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763220](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-20mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763220/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 bore 19mm with keyway sintered metal hub diameter 50mm length 35mm SKU: 60763219](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-bore-19mm-with-keyway-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763219/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 32 prebored 12mm sintered metal hub diameter 50mm length 35mm SKU: 60763201](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-32-prebored-12mm-sintered-metal-hub-diameter-50mm-length-35mm-sku-60763201/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 32 outside diameter 76mm length 48mm SKU: 60763200](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-32-outside-diameter-76mm-length-48mm-sku-60763200/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 25mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762825](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-25mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762825/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 24mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762824](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-24mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762824/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 22mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762822](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-22mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762822/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 20mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762820](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-20mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762820/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 19mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762819](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-19mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762819/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 18mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762818](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-18mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762818/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 16mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762816](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-16mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762816/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 15mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762815](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-15mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762815/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 bore 14mm with keyway sintered metal hub diameter 44mm length 35mm SKU: 60762814](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-bore-14mm-with-keyway-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762814/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 28 prebored 6mm sintered metal hub diameter 44mm length 35mm SKU: 60762801](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-28-prebored-6mm-sintered-metal-hub-diameter-44mm-length-35mm-sku-60762801/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Sleeve part for toothed coupling BOS II material PA 6.6 Size 28 outside diameter 65mm length 46mm SKU: 60762800](https://maedler.in/product/sleeve-part-for-toothed-coupling-bos-ii-material-pa-6-6-size-28-outside-diameter-65mm-length-46mm-sku-60762800/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 24mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762424](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-24mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762424/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 20mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762420](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-20mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762420/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 19mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762419](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-19mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762419/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 16mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762416](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-16mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762416/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 15mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762415](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-15mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762415/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Hub part for toothed coupling BOS II size 24 bore 14mm with keyway sintered metal hub diameter 36mm length 21mm SKU: 60762414](https://maedler.in/product/hub-part-for-toothed-coupling-bos-ii-size-24-bore-14mm-with-keyway-sintered-metal-hub-diameter-36mm-length-21mm-sku-60762414/): Material: Sleeve part polyamide 6.6, hub parts sintered metal, black oxide finish.Hubs with finished bore, tolerance H7 with keyways DIN 6885/1and set screws (2 screws per hub).Keyway position: up to size 24: 1x on opposite of keyway, 1x 90° displaced.From size 28: 1x on keyway, 1x 90° displaced. Temperature range: -40ºC to +80ºC, short time up to +120°C.Please realize: A complete coupling consists of one sleeve partand two hub parts. All 3 components have to be ordered separately.So, at each outer size, various bore diameters can be chosen and combined.Sleeve part = Taschenteil.Hub part = Nabenteil. - [Leveling foot 344.5 type NG M8 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599337](https://maedler.in/product/leveling-foot-344-5-type-ng-m8-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599337/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M12 x 98mm long foot diameter 60mm bolt made from stainless steel SKU: 65599336](https://maedler.in/product/leveling-foot-344-5-type-ng-m12-x-98mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599336/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M12 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599335](https://maedler.in/product/leveling-foot-344-5-type-ng-m12-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599335/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M12 x 43mm long foot diameter 60mm bolt made from stainless steel SKU: 65599334](https://maedler.in/product/leveling-foot-344-5-type-ng-m12-x-43mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599334/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M10 x 98mm long foot diameter 60mm bolt made from stainless steel SKU: 65599333](https://maedler.in/product/leveling-foot-344-5-type-ng-m10-x-98mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599333/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M10 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599332](https://maedler.in/product/leveling-foot-344-5-type-ng-m10-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599332/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M10 x 43mm long foot diameter 60mm bolt made from stainless steel SKU: 65599331](https://maedler.in/product/leveling-foot-344-5-type-ng-m10-x-43mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599331/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M8 x 43mm long foot diameter 60mm bolt made from stainless steel SKU: 65599330](https://maedler.in/product/leveling-foot-344-5-type-ng-m8-x-43mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599330/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M24 x 198mm long foot diameter 100mm bolt made from stainless steel SKU: 65599329](https://maedler.in/product/leveling-foot-344-5-type-n-m24-x-198mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599329/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M24 x 158mm long foot diameter 100mm bolt made from stainless steel SKU: 65599328](https://maedler.in/product/leveling-foot-344-5-type-n-m24-x-158mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599328/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M24 x 98mm long foot diameter 100mm bolt made from stainless steel SKU: 65599327](https://maedler.in/product/leveling-foot-344-5-type-n-m24-x-98mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599327/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M20 x 158mm long foot diameter 100mm bolt made from stainless steel SKU: 65599326](https://maedler.in/product/leveling-foot-344-5-type-n-m20-x-158mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599326/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M20 x 138mm long foot diameter 100mm bolts made from stainless steel SKU: 65599325](https://maedler.in/product/leveling-foot-344-5-type-n-m20-x-138mm-long-foot-diameter-100mm-bolts-made-from-stainless-steel-sku-65599325/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M20 x 98mm long foot diameter 100mm bolt made from stainless steel SKU: 65599324](https://maedler.in/product/leveling-foot-344-5-type-n-m20-x-98mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599324/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M20 x 158mm long foot diameter 80mm bolt made from stainless steel SKU: 65599323](https://maedler.in/product/leveling-foot-344-5-type-n-m20-x-158mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599323/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M20 x 138mm long foot diameter 80mm bolt made from stainless steel SKU: 65599322](https://maedler.in/product/leveling-foot-344-5-type-n-m20-x-138mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599322/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M20 x 98mm long foot diameter 80mm bolt made from stainless steel SKU: 65599321](https://maedler.in/product/leveling-foot-344-5-type-n-m20-x-98mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599321/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M16 x 148mm long foot diameter 80mm bolt made from stainless steel SKU: 65599316](https://maedler.in/product/leveling-foot-344-5-type-n-m16-x-148mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599316/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M16 x 108mm long foot diameter 80mm bolt made from stainless steel SKU: 65599315](https://maedler.in/product/leveling-foot-344-5-type-n-m16-x-108mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599315/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M16 x 68mm long foot diameter 80mm bolt made from stainless steel SKU: 65599314](https://maedler.in/product/leveling-foot-344-5-type-n-m16-x-68mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599314/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M16 x 148mm long foot diameter 60mm bolt made from stainless steel SKU: 65599313](https://maedler.in/product/leveling-foot-344-5-type-n-m16-x-148mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599313/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M16 x 108mm long foot diameter 60mm bolt made from stainless steel SKU: 65599312](https://maedler.in/product/leveling-foot-344-5-type-n-m16-x-108mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599312/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M16 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599311](https://maedler.in/product/leveling-foot-344-5-type-n-m16-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599311/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M14 x 148mm long foot diameter 60mm bolt made from stainless steel SKU: 65599310](https://maedler.in/product/leveling-foot-344-5-type-n-m14-x-148mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599310/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M14 x 98mm long foot diameter 60mm bolt made from stainless steel SKU: 65599309](https://maedler.in/product/leveling-foot-344-5-type-n-m14-x-98mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599309/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M14 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599308](https://maedler.in/product/leveling-foot-344-5-type-n-m14-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599308/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M8 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599307](https://maedler.in/product/leveling-foot-344-5-type-n-m8-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599307/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M12 x 98mm long foot diameter 60mm bolt made from stainless steel SKU: 65599306](https://maedler.in/product/leveling-foot-344-5-type-n-m12-x-98mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599306/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M12 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599305](https://maedler.in/product/leveling-foot-344-5-type-n-m12-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599305/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M12 x 43mm long foot diameter 60mm bolt made from stainless steel SKU: 65599304](https://maedler.in/product/leveling-foot-344-5-type-n-m12-x-43mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599304/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M10 x 98mm long foot diameter 60mm bolt made from stainless steel SKU: 65599303](https://maedler.in/product/leveling-foot-344-5-type-n-m10-x-98mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599303/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M10 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599302](https://maedler.in/product/leveling-foot-344-5-type-n-m10-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599302/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M10 x 43mm long foot diameter 60mm bolt made from stainless steel SKU: 65599301](https://maedler.in/product/leveling-foot-344-5-type-n-m10-x-43mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599301/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type N M8 x 43mm long foot diameter 60mm bolt made from stainless steel SKU: 65599300](https://maedler.in/product/leveling-foot-344-5-type-n-m8-x-43mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599300/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling pad 2259 type N thread M24 stainless steel 1.4301 (AISI 304) SKU: 65599224](https://maedler.in/product/leveling-pad-2259-type-n-thread-m24-stainless-steel-1-4301-aisi-304-sku-65599224/): Material type N: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type N thread M20 stainless steel 1.4301 (AISI 304) SKU: 65599220](https://maedler.in/product/leveling-pad-2259-type-n-thread-m20-stainless-steel-1-4301-aisi-304-sku-65599220/): Material type N: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type N thread M16 stainless steel 1.4301 (AISI 304) SKU: 65599216](https://maedler.in/product/leveling-pad-2259-type-n-thread-m16-stainless-steel-1-4301-aisi-304-sku-65599216/): Material type N: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type N thread M12 stainless steel 1.4301 (AISI 304) SKU: 65599212](https://maedler.in/product/leveling-pad-2259-type-n-thread-m12-stainless-steel-1-4301-aisi-304-sku-65599212/): Material type N: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type N thread M10 stainless steel 1.4301 (AISI 304) SKU: 65599210](https://maedler.in/product/leveling-pad-2259-type-n-thread-m10-stainless-steel-1-4301-aisi-304-sku-65599210/): Material type N: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type N thread M8 stainless steel 1.4301 (AISI 304) SKU: 65599208](https://maedler.in/product/leveling-pad-2259-type-n-thread-m8-stainless-steel-1-4301-aisi-304-sku-65599208/): Material type N: Stainless steel 1.4301 (AISI 304). - [Leveling pad 2259 type N thread M6 stainless steel 1.4301 (AISI 304) SKU: 65599206](https://maedler.in/product/leveling-pad-2259-type-n-thread-m6-stainless-steel-1-4301-aisi-304-sku-65599206/): Material type N: Stainless steel 1.4301 (AISI 304). - [Leveling foot 344 type AG M24x150mm long foot diameter 100mm SKU: 65577700](https://maedler.in/product/leveling-foot-344-type-ag-m24x150mm-long-foot-diameter-100mm-sku-65577700/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M24x125mm long foot diameter 100mm SKU: 65577600](https://maedler.in/product/leveling-foot-344-type-ag-m24x125mm-long-foot-diameter-100mm-sku-65577600/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M24x100mm long foot diameter 100mm SKU: 65577500](https://maedler.in/product/leveling-foot-344-type-ag-m24x100mm-long-foot-diameter-100mm-sku-65577500/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M20x150mm long foot diameter 100mm SKU: 65577400](https://maedler.in/product/leveling-foot-344-type-ag-m20x150mm-long-foot-diameter-100mm-sku-65577400/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M20x125mm long foot diameter 100mm SKU: 65577300](https://maedler.in/product/leveling-foot-344-type-ag-m20x125mm-long-foot-diameter-100mm-sku-65577300/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M20x100mm long foot diameter 100mm SKU: 65577200](https://maedler.in/product/leveling-foot-344-type-ag-m20x100mm-long-foot-diameter-100mm-sku-65577200/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M20x75mm long foot diameter 100mm SKU: 65577100](https://maedler.in/product/leveling-foot-344-type-ag-m20x75mm-long-foot-diameter-100mm-sku-65577100/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M20x150mm long foot diameter 80mm SKU: 65576800](https://maedler.in/product/leveling-foot-344-type-ag-m20x150mm-long-foot-diameter-80mm-sku-65576800/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M20x125mm long foot diameter 80mm SKU: 65576700](https://maedler.in/product/leveling-foot-344-type-ag-m20x125mm-long-foot-diameter-80mm-sku-65576700/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M20x100mm long foot diameter 80mm SKU: 65576600](https://maedler.in/product/leveling-foot-344-type-ag-m20x100mm-long-foot-diameter-80mm-sku-65576600/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M20x75mm long foot diameter 80mm SKU: 65576500](https://maedler.in/product/leveling-foot-344-type-ag-m20x75mm-long-foot-diameter-80mm-sku-65576500/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x150mm long foot diameter 80mm SKU: 65576400](https://maedler.in/product/leveling-foot-344-type-ag-m16x150mm-long-foot-diameter-80mm-sku-65576400/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x125mm long foot diameter 80mm SKU: 65576300](https://maedler.in/product/leveling-foot-344-type-ag-m16x125mm-long-foot-diameter-80mm-sku-65576300/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x100mm long foot diameter 80mm SKU: 65576200](https://maedler.in/product/leveling-foot-344-type-ag-m16x100mm-long-foot-diameter-80mm-sku-65576200/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x75mm long foot diameter 80mm SKU: 65576100](https://maedler.in/product/leveling-foot-344-type-ag-m16x75mm-long-foot-diameter-80mm-sku-65576100/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x150mm long foot diameter 60mm SKU: 65575400](https://maedler.in/product/leveling-foot-344-type-ag-m16x150mm-long-foot-diameter-60mm-sku-65575400/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x125mm long foot diameter 60mm SKU: 65575300](https://maedler.in/product/leveling-foot-344-type-ag-m16x125mm-long-foot-diameter-60mm-sku-65575300/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x100mm long foot diameter 60mm SKU: 65575200](https://maedler.in/product/leveling-foot-344-type-ag-m16x100mm-long-foot-diameter-60mm-sku-65575200/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x75mm long foot diameter 60mm SKU: 65575100](https://maedler.in/product/leveling-foot-344-type-ag-m16x75mm-long-foot-diameter-60mm-sku-65575100/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x150mm long foot diameter 50mm SKU: 65574400](https://maedler.in/product/leveling-foot-344-type-ag-m16x150mm-long-foot-diameter-50mm-sku-65574400/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x125mm long foot diameter 50mm SKU: 65574300](https://maedler.in/product/leveling-foot-344-type-ag-m16x125mm-long-foot-diameter-50mm-sku-65574300/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x100mm long foot diameter 50mm SKU: 65574200](https://maedler.in/product/leveling-foot-344-type-ag-m16x100mm-long-foot-diameter-50mm-sku-65574200/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 344 type AG M16x75mm long foot diameter 50mm SKU: 65574100](https://maedler.in/product/leveling-foot-344-type-ag-m16x75mm-long-foot-diameter-50mm-sku-65574100/): Material: Steel, zinc plated, chromated. Type AG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black. The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end. With inlayed rubber pad in the steel foot is fixed by a screw. - [Spherical washer-and-seat combination diameter 60mm for bolt diameter 30mm steel hardened SKU: 65543000K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-60mm-for-bolt-diameter-30mm-steel-hardened-sku-65543000k/): Material: Spherical washer from steel, turned, case hardened, hardening depth min. 0.2 mm. Conical seat tempered. Phosphated and oiled.Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 48mm for bolt diameter 24mm steel hardened SKU: 65542400K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-48mm-for-bolt-diameter-24mm-steel-hardened-sku-65542400k/): Material: Spherical washer from steel, turned, case hardened, hardening depth min. 0.2 mm. Conical seat tempered. Phosphated and oiled.Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 40mm for bolt diameter 20mm steel hardened SKU: 65542000K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-40mm-for-bolt-diameter-20mm-steel-hardened-sku-65542000k/): Material: Spherical washer from steel, turned, case hardened, hardening depth min. 0.2 mm. Conical seat tempered. Phosphated and oiled.Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 32mm for bolt diameter 16mm steel hardened SKU: 65541600K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-32mm-for-bolt-diameter-16mm-steel-hardened-sku-65541600k/): Material: Spherical washer from steel, turned, case hardened, hardening depth min. 0.2 mm. Conical seat tempered. Phosphated and oiled.Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 25mm for bolt diameter 12mm steel hardened SKU: 65541200K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-25mm-for-bolt-diameter-12mm-steel-hardened-sku-65541200k/): Material: Spherical washer from steel, turned, case hardened, hardening depth min. 0.2 mm. Conical seat tempered. Phosphated and oiled.Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 21mm for bolt diameter 10mm steel hardened SKU: 65541000K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-21mm-for-bolt-diameter-10mm-steel-hardened-sku-65541000k/): Material: Spherical washer from steel, turned, case hardened, hardening depth min. 0.2 mm. Conical seat tempered. Phosphated and oiled.Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 17mm for bolt diameter 8mm steel hardened SKU: 65540800K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-17mm-for-bolt-diameter-8mm-steel-hardened-sku-65540800k/): Material: Spherical washer from steel, turned, case hardened, hardening depth min. 0.2 mm. Conical seat tempered. Phosphated and oiled.Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 13mm for bolt diameter 6mm steel hardened SKU: 65540600K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-13mm-for-bolt-diameter-6mm-steel-hardened-sku-65540600k/): Material: Spherical washer from steel, turned, case hardened, hardening depth min. 0.2 mm. Conical seat tempered. Phosphated and oiled.Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Leveling foot 344 type AG M24 x 198mm long foot diameter 100mm SKU: 65535900](https://maedler.in/product/leveling-foot-344-type-ag-m24-x-198mm-long-foot-diameter-100mm-sku-65535900/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M24 x 158mm long foot diameter 100mm SKU: 65535800](https://maedler.in/product/leveling-foot-344-type-ag-m24-x-158mm-long-foot-diameter-100mm-sku-65535800/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M24 x 98mm long foot diameter 100mm SKU: 65535700](https://maedler.in/product/leveling-foot-344-type-ag-m24-x-98mm-long-foot-diameter-100mm-sku-65535700/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M20 x 158mm long foot diameter 100mm SKU: 65535600](https://maedler.in/product/leveling-foot-344-type-ag-m20-x-158mm-long-foot-diameter-100mm-sku-65535600/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M20 x 138mm long foot diameter 100mm SKU: 65535500](https://maedler.in/product/leveling-foot-344-type-ag-m20-x-138mm-long-foot-diameter-100mm-sku-65535500/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M20 x 98mm long foot diameter 100mm SKU: 65535400](https://maedler.in/product/leveling-foot-344-type-ag-m20-x-98mm-long-foot-diameter-100mm-sku-65535400/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M20 x 158mm long foot diameter 80mm SKU: 65535300](https://maedler.in/product/leveling-foot-344-type-ag-m20-x-158mm-long-foot-diameter-80mm-sku-65535300/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M20 x 138mm long foot diameter 80mm SKU: 65535200](https://maedler.in/product/leveling-foot-344-type-ag-m20-x-138mm-long-foot-diameter-80mm-sku-65535200/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M20 x 98mm long foot diameter 80mm SKU: 65535100](https://maedler.in/product/leveling-foot-344-type-ag-m20-x-98mm-long-foot-diameter-80mm-sku-65535100/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M16 x 148mm long foot diameter 80mm SKU: 65534600](https://maedler.in/product/leveling-foot-344-type-ag-m16-x-148mm-long-foot-diameter-80mm-sku-65534600/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M16 x 108mm long foot diameter 80mm SKU: 65534500](https://maedler.in/product/leveling-foot-344-type-ag-m16-x-108mm-long-foot-diameter-80mm-sku-65534500/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M16 x 68mm long foot diameter 80mm SKU: 65534400](https://maedler.in/product/leveling-foot-344-type-ag-m16-x-68mm-long-foot-diameter-80mm-sku-65534400/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M16 x 148mm long foot diameter 60mm SKU: 65534300](https://maedler.in/product/leveling-foot-344-type-ag-m16-x-148mm-long-foot-diameter-60mm-sku-65534300/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M16 x 108mm long foot diameter 60mm SKU: 65534200](https://maedler.in/product/leveling-foot-344-type-ag-m16-x-108mm-long-foot-diameter-60mm-sku-65534200/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M16 x 68mm long foot diameter 60mm SKU: 65534100](https://maedler.in/product/leveling-foot-344-type-ag-m16-x-68mm-long-foot-diameter-60mm-sku-65534100/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M14 x 148mm long foot diameter 60mm SKU: 65534000](https://maedler.in/product/leveling-foot-344-type-ag-m14-x-148mm-long-foot-diameter-60mm-sku-65534000/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M14 x 98mm long foot diameter 60mm SKU: 65533900](https://maedler.in/product/leveling-foot-344-type-ag-m14-x-98mm-long-foot-diameter-60mm-sku-65533900/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M14 x 68mm long foot diameter 60mm SKU: 65533800](https://maedler.in/product/leveling-foot-344-type-ag-m14-x-68mm-long-foot-diameter-60mm-sku-65533800/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M8 x 68mm long foot diameter 60mm SKU: 65533700](https://maedler.in/product/leveling-foot-344-type-ag-m8-x-68mm-long-foot-diameter-60mm-sku-65533700/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M12 x 98mm long foot diameter 60mm SKU: 65533600](https://maedler.in/product/leveling-foot-344-type-ag-m12-x-98mm-long-foot-diameter-60mm-sku-65533600/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M12 x 68mm long foot diameter 60mm SKU: 65533500](https://maedler.in/product/leveling-foot-344-type-ag-m12-x-68mm-long-foot-diameter-60mm-sku-65533500/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M12 x 43mm long foot diameter 60mm SKU: 65533400](https://maedler.in/product/leveling-foot-344-type-ag-m12-x-43mm-long-foot-diameter-60mm-sku-65533400/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M10 x 98mm long foot diameter 60mm SKU: 65533300](https://maedler.in/product/leveling-foot-344-type-ag-m10-x-98mm-long-foot-diameter-60mm-sku-65533300/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M10 x 68mm long foot diameter 60mm SKU: 65533200](https://maedler.in/product/leveling-foot-344-type-ag-m10-x-68mm-long-foot-diameter-60mm-sku-65533200/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M10 x 43mm long foot diameter 60mm SKU: 65533100](https://maedler.in/product/leveling-foot-344-type-ag-m10-x-43mm-long-foot-diameter-60mm-sku-65533100/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type AG M8 x 43mm long foot diameter 60mm SKU: 65533000](https://maedler.in/product/leveling-foot-344-type-ag-m8-x-43mm-long-foot-diameter-60mm-sku-65533000/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M24 x 198mm long foot diameter 100mm SKU: 65532900](https://maedler.in/product/leveling-foot-344-type-a-m24-x-198mm-long-foot-diameter-100mm-sku-65532900/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344 type A M24 x 158mm long foot diameter 100mm SKU: 65532800](https://maedler.in/product/leveling-foot-344-type-a-m24-x-158mm-long-foot-diameter-100mm-sku-65532800/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: steel, strength class 5.8., zinc plated, chromated. Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type A: without rubber pad. Type AG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 38 teeth material steel SKU: 12613800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-38-teeth-material-steel-sku-12613800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 36 teeth material steel SKU: 12613600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-36-teeth-material-steel-sku-12613600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 32 teeth material steel SKU: 12613200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-32-teeth-material-steel-sku-12613200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 30 teeth material steel SKU: 12613000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-30-teeth-material-steel-sku-12613000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 27 teeth material steel SKU: 12612700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-27-teeth-material-steel-sku-12612700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 25 teeth material steel SKU: 12612500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-25-teeth-material-steel-sku-12612500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 24 teeth material steel SKU: 12612400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-24-teeth-material-steel-sku-12612400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 23 teeth material steel SKU: 12612300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-23-teeth-material-steel-sku-12612300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 22 teeth material steel SKU: 12612200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-22-teeth-material-steel-sku-12612200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 21 teeth material steel SKU: 12612100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-21-teeth-material-steel-sku-12612100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 20 teeth material steel SKU: 12612000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-20-teeth-material-steel-sku-12612000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 19 teeth material steel SKU: 12611900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-19-teeth-material-steel-sku-12611900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 18 teeth material steel SKU: 12611800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-18-teeth-material-steel-sku-12611800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 17 teeth material steel SKU: 12611700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-17-teeth-material-steel-sku-12611700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 16 teeth material steel SKU: 12611600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-16-teeth-material-steel-sku-12611600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 15 teeth material steel SKU: 12611500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-15-teeth-material-steel-sku-12611500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 14 teeth material steel SKU: 12611400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-14-teeth-material-steel-sku-12611400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 13 teeth material steel SKU: 12611300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-13-teeth-material-steel-sku-12611300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 12 teeth material steel SKU: 12611200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-12-teeth-material-steel-sku-12611200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 11 teeth material steel SKU: 12611100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-11-teeth-material-steel-sku-12611100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 10 teeth material steel SKU: 12611000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-10-teeth-material-steel-sku-12611000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 9 teeth material steel SKU: 12610900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-9-teeth-material-steel-sku-12610900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 8 teeth material steel SKU: 12610800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-8-teeth-material-steel-sku-12610800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 30 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599130](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-30-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599130/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 25 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599125](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-25-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599125/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 20 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599120](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-20-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599120/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 15 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599115](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-15-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599115/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 13 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599113](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-13-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599113/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRR with hub 08 B-2 1/2x5/16" 12 teeth material stainless steel 1.4301 (AISI 304) SKU: 12599112](https://maedler.in/product/double-strand-sprocket-zrr-with-hub-08-b-2-1-2x5-16-12-teeth-material-stainless-steel-1-4301-aisi-304-sku-12599112/): Material: Stainless steel 1.4301 (AISI 304). Teeth milled, pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 25 teeth material steel teeth hardened SKU: 12588525](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-teeth-hardened-sku-12588525/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 23 teeth material steel teeth hardened SKU: 12588523](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-teeth-hardened-sku-12588523/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 21 teeth material steel teeth hardened SKU: 12588521](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-teeth-hardened-sku-12588521/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 20 teeth material steel teeth hardened SKU: 12588520](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-teeth-hardened-sku-12588520/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 19 teeth material steel teeth hardened SKU: 12588519](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-teeth-hardened-sku-12588519/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 18 teeth material steel teeth hardened SKU: 12588518](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-teeth-hardened-sku-12588518/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 17 teeth material steel teeth hardened SKU: 12588517](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-teeth-hardened-sku-12588517/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 16 teeth material steel teeth hardened SKU: 12588516](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-teeth-hardened-sku-12588516/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 15 teeth material steel teeth hardened SKU: 12588515](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-teeth-hardened-sku-12588515/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 14 teeth material steel teeth hardened SKU: 12588514](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-14-teeth-material-steel-teeth-hardened-sku-12588514/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 13 teeth material steel teeth hardened SKU: 12588513](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-13-teeth-material-steel-teeth-hardened-sku-12588513/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZRENG for 2 single roller chains 08 B-1 12 teeth material steel teeth hardened SKU: 12588512](https://maedler.in/product/double-sprocket-zreng-for-2-single-roller-chains-08-b-1-12-teeth-material-steel-teeth-hardened-sku-12588512/): Material: Steel C45. Teeth induction hardened (approx. HRC 50). Teeth milled, bores pre-bored.Double-Sprockets with hub for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors.General dimensions: B1 = max. 7,2 mm, B2 = 28 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 25 teeth material steel teeth hardened SKU: 12588425](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-25-teeth-material-steel-teeth-hardened-sku-12588425/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 23 teeth material steel teeth hardened SKU: 12588423](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-23-teeth-material-steel-teeth-hardened-sku-12588423/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 21 teeth material steel teeth hardened SKU: 12588421](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-21-teeth-material-steel-teeth-hardened-sku-12588421/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 20 teeth material steel teeth hardened SKU: 12588420](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-20-teeth-material-steel-teeth-hardened-sku-12588420/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 19 teeth material steel teeth hardened SKU: 12588419](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-19-teeth-material-steel-teeth-hardened-sku-12588419/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 18 teeth material steel teeth hardened SKU: 12588418](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-18-teeth-material-steel-teeth-hardened-sku-12588418/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 17 teeth material steel teeth hardened SKU: 12588417](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-17-teeth-material-steel-teeth-hardened-sku-12588417/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 16 teeth material steel teeth hardened SKU: 12588416](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-16-teeth-material-steel-teeth-hardened-sku-12588416/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 15 teeth material steel teeth hardened SKU: 12588415](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-15-teeth-material-steel-teeth-hardened-sku-12588415/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 14 teeth material steel teeth hardened SKU: 12588414](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-14-teeth-material-steel-teeth-hardened-sku-12588414/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 13 teeth material steel teeth hardened SKU: 12588413](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-13-teeth-material-steel-teeth-hardened-sku-12588413/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double sprocket ZREG for 2 single roller chains 08 B-1 12 teeth material steel teeth hardened SKU: 12588412](https://maedler.in/product/double-sprocket-zreg-for-2-single-roller-chains-08-b-1-12-teeth-material-steel-teeth-hardened-sku-12588412/): Material: Steel C45. Pre-bored. Teeth induction hardened (approx. HRC 50). Pitch 1/2 x 5/16" General dimensions: B1 = 7,2 mm, c = 1,3 mm, r3 = 13 mm. Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 40 teeth material steel teeth induction hardened SKU: 12588140](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-40-teeth-material-steel-teeth-induction-hardened-sku-12588140/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 38 teeth material steel teeth induction hardened SKU: 12588138](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-38-teeth-material-steel-teeth-induction-hardened-sku-12588138/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 36 teeth material steel teeth induction hardened SKU: 12588136](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-36-teeth-material-steel-teeth-induction-hardened-sku-12588136/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 35 teeth material steel teeth induction hardened SKU: 12588135](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-35-teeth-material-steel-teeth-induction-hardened-sku-12588135/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 32 teeth material steel teeth induction hardened SKU: 12588132](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-32-teeth-material-steel-teeth-induction-hardened-sku-12588132/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 30 teeth material steel teeth induction hardened SKU: 12588130](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-30-teeth-material-steel-teeth-induction-hardened-sku-12588130/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 28 teeth material steel teeth induction hardened SKU: 12588128](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-28-teeth-material-steel-teeth-induction-hardened-sku-12588128/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 27 teeth material steel teeth induction hardened SKU: 12588127](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-27-teeth-material-steel-teeth-induction-hardened-sku-12588127/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 26 teeth material steel teeth induction hardened SKU: 12588126](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-26-teeth-material-steel-teeth-induction-hardened-sku-12588126/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 25 teeth material steel teeth induction hardened SKU: 12588125](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-25-teeth-material-steel-teeth-induction-hardened-sku-12588125/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 24 teeth material steel teeth induction hardened SKU: 12588124](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-24-teeth-material-steel-teeth-induction-hardened-sku-12588124/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 23 teeth material steel teeth induction hardened SKU: 12588123](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-23-teeth-material-steel-teeth-induction-hardened-sku-12588123/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 22 teeth material steel teeth induction hardened SKU: 12588122](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-22-teeth-material-steel-teeth-induction-hardened-sku-12588122/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 21 teeth material steel teeth induction hardened SKU: 12588121](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-21-teeth-material-steel-teeth-induction-hardened-sku-12588121/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 20 teeth material steel teeth induction hardened SKU: 12588120](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-20-teeth-material-steel-teeth-induction-hardened-sku-12588120/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 19 teeth material steel teeth induction hardened SKU: 12588119](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-19-teeth-material-steel-teeth-induction-hardened-sku-12588119/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 18 teeth material steel teeth induction hardened SKU: 12588118](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-18-teeth-material-steel-teeth-induction-hardened-sku-12588118/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 17 teeth material steel teeth induction hardened SKU: 12588117](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-17-teeth-material-steel-teeth-induction-hardened-sku-12588117/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 16 teeth material steel teeth induction hardened SKU: 12588116](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-16-teeth-material-steel-teeth-induction-hardened-sku-12588116/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 15 teeth material steel teeth induction hardened SKU: 12588115](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-15-teeth-material-steel-teeth-induction-hardened-sku-12588115/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 14 teeth material steel teeth induction hardened SKU: 12588114](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-14-teeth-material-steel-teeth-induction-hardened-sku-12588114/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 13 teeth material steel teeth induction hardened SKU: 12588113](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-13-teeth-material-steel-teeth-induction-hardened-sku-12588113/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 12 teeth material steel teeth induction hardened SKU: 12588112](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-12-teeth-material-steel-teeth-induction-hardened-sku-12588112/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 11 teeth material steel teeth induction hardened SKU: 12588111](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-11-teeth-material-steel-teeth-induction-hardened-sku-12588111/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 10 teeth material steel teeth induction hardened SKU: 12588110](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-10-teeth-material-steel-teeth-induction-hardened-sku-12588110/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 9 teeth material steel teeth induction hardened SKU: 12588109](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-9-teeth-material-steel-teeth-induction-hardened-sku-12588109/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRG with hub 08 B-2 1/2x5/16" 8 teeth material steel teeth induction hardened SKU: 12588108](https://maedler.in/product/double-strand-sprocket-zrg-with-hub-08-b-2-1-2x5-16-8-teeth-material-steel-teeth-induction-hardened-sku-12588108/): Material: Steel C45, teeth induction hardened (≈ HRC 50).Pre-bored. General dimensions: B1 = 7 mm, B2 = 21 mm, c = 1,3 mm, r3 = 13 mm.Other dimensions: See the table. - [Double-strand sprocket ZRF with hub 08 B-2 30 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12583035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-30-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12583035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 30 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12583030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-30-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12583030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 30 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12583025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-30-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12583025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 25 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-25-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 25 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-25-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 25 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-25-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 24 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-24-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 24 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-24-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 23 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-23-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 23 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-23-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 23 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-23-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 22 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-22-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 22 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-22-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582135](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582135/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 21 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-21-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582035](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582035/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582030](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582030/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 08 B-2 20 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12582025](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-08-b-2-20-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12582025/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm shielded on both sides clearance C3 SKU: 6200-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-shielded-on-both-sides-clearance-c3-sku-6200-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm open (unsealed) SKU: 6200-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-open-unsealed-sku-6200-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm open (unsealed) clearance C3 SKU: 6200-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-open-unsealed-clearance-c3-sku-6200-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 68mm width 12mm sealed on both sides alternative marking 6909 SKU: 61909-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-68mm-width-12mm-sealed-on-both-sides-alternative-marking-6909-sku-61909-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 62mm width 12mm sealed on both sides SKU: 61908-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-62mm-width-12mm-sealed-on-both-sides-sku-61908-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 62mm width 12mm shielded on both sides SKU: 61908-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-62mm-width-12mm-shielded-on-both-sides-sku-61908-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 55mm width 10mm sealed on both sides SKU: 61907-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-55mm-width-10mm-sealed-on-both-sides-sku-61907-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 55mm width 10mm shielded on both sides SKU: 61907-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-55mm-width-10mm-shielded-on-both-sides-sku-61907-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 47mm width 9mm sealed on both sides SKU: 61906-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-47mm-width-9mm-sealed-on-both-sides-sku-61906-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 47mm width 9mm shielded on both sides SKU: 61906-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-47mm-width-9mm-shielded-on-both-sides-sku-61906-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 42mm width 9mm sealed on both sides SKU: 61905-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-42mm-width-9mm-sealed-on-both-sides-sku-61905-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 42mm width 9mm shielded on both sides SKU: 61905-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-42mm-width-9mm-shielded-on-both-sides-sku-61905-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 37mm width 9mm sealed on both sides SKU: 61904-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-37mm-width-9mm-sealed-on-both-sides-sku-61904-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 37mm width 9mm shielded on both sides SKU: 61904-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-37mm-width-9mm-shielded-on-both-sides-sku-61904-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 30mm width 7mm sealed on both sides SKU: 61903-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-30mm-width-7mm-sealed-on-both-sides-sku-61903-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 30mm width 7mm shielded on both sides SKU: 61903-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-30mm-width-7mm-shielded-on-both-sides-sku-61903-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 28mm width 7mm sealed on both sides SKU: 61902-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-28mm-width-7mm-sealed-on-both-sides-sku-61902-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 28mm width 7mm shielded on both sides SKU: 61902-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-28mm-width-7mm-shielded-on-both-sides-sku-61902-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 24mm width 6mm sealed on both sides SKU: 61901-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-24mm-width-6mm-sealed-on-both-sides-sku-61901-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 24mm width 6mm shielded on both sides SKU: 61901-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-24mm-width-6mm-shielded-on-both-sides-sku-61901-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 22mm width 6mm sealed on both sides SKU: 61900-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-22mm-width-6mm-sealed-on-both-sides-sku-61900-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 22mm width 6mm sealed on both sides clearance C3 SKU: 61900-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-22mm-width-6mm-sealed-on-both-sides-clearance-c3-sku-61900-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 22mm width 6mm shielded on both sides SKU: 61900-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-22mm-width-6mm-shielded-on-both-sides-sku-61900-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 22mm width 6mm shielded on both sides clearance C3 SKU: 61900-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-22mm-width-6mm-shielded-on-both-sides-clearance-c3-sku-61900-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 58mm width 7mm sealed on both sides SKU: 61809-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-58mm-width-7mm-sealed-on-both-sides-sku-61809-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 45mm outer diameter 58mm width 7mm shielded on both sides SKU: 61809-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-45mm-outer-diameter-58mm-width-7mm-shielded-on-both-sides-sku-61809-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 40mm outer diameter 52mm width 7mm sealed on both sides alternative marking 6808 SKU: 61808-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-40mm-outer-diameter-52mm-width-7mm-sealed-on-both-sides-alternative-marking-6808-sku-61808-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 35mm outer diameter 47mm width 7mm sealed on both sides alternative marking 6807 SKU: 61807-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-35mm-outer-diameter-47mm-width-7mm-sealed-on-both-sides-alternative-marking-6807-sku-61807-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 42mm width 7mm sealed on both sides SKU: 61806-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-42mm-width-7mm-sealed-on-both-sides-sku-61806-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 30mm outer diameter 42mm width 7mm shielded on both sides SKU: 61806-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-42mm-width-7mm-shielded-on-both-sides-sku-61806-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 37mm width 7mm sealed on both sides SKU: 61805-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-37mm-width-7mm-sealed-on-both-sides-sku-61805-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 37mm width 7mm shielded on both sides SKU: 61805-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-37mm-width-7mm-shielded-on-both-sides-sku-61805-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 32mm width 7mm sealed on both sides SKU: 61804-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-32mm-width-7mm-sealed-on-both-sides-sku-61804-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 32mm width 7mm sealed on both sides clearance C3 SKU: 61804-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-32mm-width-7mm-sealed-on-both-sides-clearance-c3-sku-61804-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 32mm width 7mm shielded on both sides SKU: 61804-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-32mm-width-7mm-shielded-on-both-sides-sku-61804-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 32mm width 7mm shielded on both sides clearance C3 SKU: 61804-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-32mm-width-7mm-shielded-on-both-sides-clearance-c3-sku-61804-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 26mm width 5mm shielded on both sides SKU: 61803-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-26mm-width-5mm-shielded-on-both-sides-sku-61803-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 26mm width 5mm sealed on both sides SKU: 61803-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-26mm-width-5mm-sealed-on-both-sides-sku-61803-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 26mm width 5mm sealed on both sides SKU: 61803-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-26mm-width-5mm-sealed-on-both-sides-sku-61803-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 26mm width 5mm shielded on both sides SKU: 61803-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-26mm-width-5mm-shielded-on-both-sides-sku-61803-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm shielded on both sides SKU: 61802-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-shielded-on-both-sides-sku-61802-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm sealed on both sides SKU: 61802-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-sealed-on-both-sides-sku-61802-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm sealed on both sides SKU: 61802-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-sealed-on-both-sides-sku-61802-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm sealed on both sides clearance C3 SKU: 61802-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-sealed-on-both-sides-clearance-c3-sku-61802-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm shielded on both sides SKU: 61802-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-shielded-on-both-sides-sku-61802-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 24mm width 5mm shielded on both sides clearance C3 SKU: 61802-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-24mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-61802-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm shielded on both sides SKU: 61801-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-shielded-on-both-sides-sku-61801-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm sealed on both sides SKU: 61801-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-sealed-on-both-sides-sku-61801-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm sealed on both sides SKU: 61801-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-sealed-on-both-sides-sku-61801-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm sealed on both sides clearance C3 SKU: 61801-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-sealed-on-both-sides-clearance-c3-sku-61801-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm shielded on both sides SKU: 61801-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-shielded-on-both-sides-sku-61801-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm shielded on both sides clearance C3 SKU: 61801-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-61801-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 21mm width 5mm open (unsealed) SKU: 61801-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-21mm-width-5mm-open-unsealed-sku-61801-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm shielded on both sides SKU: 61800-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-shielded-on-both-sides-sku-61800-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm sealed on both sides SKU: 61800-2RS1-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-sealed-on-both-sides-sku-61800-2rs1-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm sealed on both sides SKU: 61800-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-sealed-on-both-sides-sku-61800-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm sealed on both sides clearance C3 SKU: 61800-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-sealed-on-both-sides-clearance-c3-sku-61800-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm shielded on both sides SKU: 61800-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-shielded-on-both-sides-sku-61800-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm shielded on both sides clearance C3 SKU: 61800-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-shielded-on-both-sides-clearance-c3-sku-61800-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 19mm width 5mm open (unsealed) SKU: 61800-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-19mm-width-5mm-open-unsealed-sku-61800-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [Locking assembly COM-A stainless steel 1.4401 bore 50mm size 50-80 SKU: 61599550](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-50mm-size-50-80-sku-61599550/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Very short version. Also suitable for small hub diameters. Not self-centering. Not self-locking. Axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 45mm size 45-75 SKU: 61599545](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-45mm-size-45-75-sku-61599545/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 40mm size 40-65 SKU: 61599540](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-40mm-size-40-65-sku-61599540/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 38mm size 38-65 SKU: 61599538](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-38mm-size-38-65-sku-61599538/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 30mm size 30-55 SKU: 61599530](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-30mm-size-30-55-sku-61599530/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 24mm size 24-50 SKU: 61599524](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-24mm-size-24-50-sku-61599524/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 22mm size 22-47 SKU: 61599522](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-22mm-size-22-47-sku-61599522/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 20mm size 20-47 SKU: 61599520](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-20mm-size-20-47-sku-61599520/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 19mm size 19-47 SKU: 61599519](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-19mm-size-19-47-sku-61599519/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 18mm size 18-47 SKU: 61599518](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-18mm-size-18-47-sku-61599518/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 15mm size 15-42 SKU: 61599515](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-15mm-size-15-42-sku-61599515/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A stainless steel 1.4401 bore 14mm size 14-42 SKU: 61599514](https://maedler.in/product/locking-assembly-com-a-stainless-steel-1-4401-bore-14mm-size-14-42-sku-61599514/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Stainless steel 1.4401 (SS316). Clamping bush for lower torques; not self-centering. Fit: Shaft h8, Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the cone angle, the clamping set is usually released once all screws have been fully unfastened. There a three large threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### new sizes 14 - 19 mm ### - [Locking assembly COM-A bore 95mm size 95-135 SKU: 61559500](https://maedler.in/product/locking-assembly-com-a-bore-95mm-size-95-135-sku-61559500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 85mm size 85-125 SKU: 61558500](https://maedler.in/product/locking-assembly-com-a-bore-85mm-size-85-125-sku-61558500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 80mm size 80-120 SKU: 61558000](https://maedler.in/product/locking-assembly-com-a-bore-80mm-size-80-120-sku-61558000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 75mm size 75-115 SKU: 61557500](https://maedler.in/product/locking-assembly-com-a-bore-75mm-size-75-115-sku-61557500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 70mm size 70-110 SKU: 61557000](https://maedler.in/product/locking-assembly-com-a-bore-70mm-size-70-110-sku-61557000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 65mm size 65-95 SKU: 61556500](https://maedler.in/product/locking-assembly-com-a-bore-65mm-size-65-95-sku-61556500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 60mm size 60-90 SKU: 61556000](https://maedler.in/product/locking-assembly-com-a-bore-60mm-size-60-90-sku-61556000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 48mm size 48-80 SKU: 61554800](https://maedler.in/product/locking-assembly-com-a-bore-48mm-size-48-80-sku-61554800/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 45mm size 45-75 SKU: 61554500](https://maedler.in/product/locking-assembly-com-a-bore-45mm-size-45-75-sku-61554500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 32mm size 32-60 SKU: 61553200](https://maedler.in/product/locking-assembly-com-a-bore-32mm-size-32-60-sku-61553200/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 30mm size 30-55 SKU: 61553000](https://maedler.in/product/locking-assembly-com-a-bore-30mm-size-30-55-sku-61553000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 25mm size 25-50 SKU: 61552500](https://maedler.in/product/locking-assembly-com-a-bore-25mm-size-25-50-sku-61552500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 24mm size 24-50 SKU: 61552400](https://maedler.in/product/locking-assembly-com-a-bore-24mm-size-24-50-sku-61552400/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 22mm size 22-47 SKU: 61552200](https://maedler.in/product/locking-assembly-com-a-bore-22mm-size-22-47-sku-61552200/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 20mm size 20-47 SKU: 61552000](https://maedler.in/product/locking-assembly-com-a-bore-20mm-size-20-47-sku-61552000/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 19mm size 19-47 SKU: 61551900](https://maedler.in/product/locking-assembly-com-a-bore-19mm-size-19-47-sku-61551900/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 17mm size 17-44 SKU: 61551700](https://maedler.in/product/locking-assembly-com-a-bore-17mm-size-17-44-sku-61551700/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 15mm size 15-42 SKU: 61551500](https://maedler.in/product/locking-assembly-com-a-bore-15mm-size-15-42-sku-61551500/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-A bore 14mm size 14-42 SKU: 61551400](https://maedler.in/product/locking-assembly-com-a-bore-14mm-size-14-42-sku-61551400/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts - Fastening Torque T - Transmittable Torque F - Transmittable Axial Force P - Surface Pressure onto Hub ### New sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 100mm size 100x145x33mm SKU: 61530100](https://maedler.in/product/locking-assembly-com-as-bore-100mm-size-100x145x33mm-sku-61530100/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 95mm size 95x135x28mm SKU: 61530095](https://maedler.in/product/locking-assembly-com-as-bore-95mm-size-95x135x28mm-sku-61530095/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 90mm size 90x130x28mm SKU: 61530090](https://maedler.in/product/locking-assembly-com-as-bore-90mm-size-90x130x28mm-sku-61530090/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 80mm size 80x120x28mm SKU: 61530080](https://maedler.in/product/locking-assembly-com-as-bore-80mm-size-80x120x28mm-sku-61530080/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 70mm size 70x110x28mm SKU: 61530070](https://maedler.in/product/locking-assembly-com-as-bore-70mm-size-70x110x28mm-sku-61530070/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 60mm size 60x90x24mm SKU: 61530060](https://maedler.in/product/locking-assembly-com-as-bore-60mm-size-60x90x24mm-sku-61530060/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 55mm size 55x85x24mm SKU: 61530055](https://maedler.in/product/locking-assembly-com-as-bore-55mm-size-55x85x24mm-sku-61530055/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 50mm size 50x80x24mm SKU: 61530050](https://maedler.in/product/locking-assembly-com-as-bore-50mm-size-50x80x24mm-sku-61530050/): Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For low torques. Very short version. Also suitable for small hub diameters. Not self-centering. Not self-locking. Axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm. Material: Steel. For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft. For medium high torques. Like COM-A, but with slotted pressure rings. Not self-centering. Self-releasing at dismounting. No axial movement during mounting. Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Locking assembly COM-AS bore 48mm size 48x80x24mm SKU: 61530048](https://maedler.in/product/locking-assembly-com-as-bore-48mm-size-48x80x24mm-sku-61530048/): Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For low torques.Very short version.Also suitable for small hub diameters.Not self-centering.Not self-locking.Axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub/shaft max. 12,5 µm.Material: Steel.For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.For medium high torques. Like COM-A, but with slotted pressure rings.Not self-centering.Self-releasing at dismounting.No axial movement during mounting.Fit: Shaft h8, Hub H8. Surface roughness hub / shaft max. 12.5 µm. More sizes up to d=1,000mm for 2,336,000Nm are available. Price and delivery time on request. ### New Sizes 14 to 18 mm ### - [Conveyor roller S1 steel zinc-plated Ø=50mm RL=200mm EL=210mm AL=230mm spring axle SKU: 65681502](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o50mm-rl200mm-el210mm-al230mm-spring-axle-sku-65681502/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=80mm RL=600mm EL=622mm AL=652mm external thread SKU: 65672806](https://maedler.in/product/conveyor-roller-s1-steel-o80mm-rl600mm-el622mm-al652mm-external-thread-sku-65672806/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=80mm RL=500mm EL=522mm AL=552mm external thread SKU: 65672805](https://maedler.in/product/conveyor-roller-s1-steel-o80mm-rl500mm-el522mm-al552mm-external-thread-sku-65672805/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=80mm RL=400mm EL=422mm AL=452mm external thread SKU: 65672804](https://maedler.in/product/conveyor-roller-s1-steel-o80mm-rl400mm-el422mm-al452mm-external-thread-sku-65672804/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=80mm RL=300mm EL=322mm AL=352mm external thread SKU: 65672803](https://maedler.in/product/conveyor-roller-s1-steel-o80mm-rl300mm-el322mm-al352mm-external-thread-sku-65672803/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=80mm RL=200mm EL=222mm AL=252mm external thread SKU: 65672802](https://maedler.in/product/conveyor-roller-s1-steel-o80mm-rl200mm-el222mm-al252mm-external-thread-sku-65672802/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=60mm RL=600mm EL=622mm AL=652mm external thread SKU: 65672606](https://maedler.in/product/conveyor-roller-s1-steel-o60mm-rl600mm-el622mm-al652mm-external-thread-sku-65672606/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=60mm RL=500mm EL=522mm AL=552mm external thread SKU: 65672605](https://maedler.in/product/conveyor-roller-s1-steel-o60mm-rl500mm-el522mm-al552mm-external-thread-sku-65672605/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=60mm RL=400mm EL=422mm AL=452mm external thread SKU: 65672604](https://maedler.in/product/conveyor-roller-s1-steel-o60mm-rl400mm-el422mm-al452mm-external-thread-sku-65672604/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=60mm RL=300mm EL=322mm AL=352mm external thread SKU: 65672603](https://maedler.in/product/conveyor-roller-s1-steel-o60mm-rl300mm-el322mm-al352mm-external-thread-sku-65672603/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=60mm RL=200mm EL=222mm AL=252mm external thread SKU: 65672602](https://maedler.in/product/conveyor-roller-s1-steel-o60mm-rl200mm-el222mm-al252mm-external-thread-sku-65672602/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=600mm EL=620mm AL=650mm external thread SKU: 65672506](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl600mm-el620mm-al650mm-external-thread-sku-65672506/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=500mm EL=520mm AL=550mm external thread SKU: 65672505](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl500mm-el520mm-al550mm-external-thread-sku-65672505/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=400mm EL=420mm AL=450mm external thread SKU: 65672504](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl400mm-el420mm-al450mm-external-thread-sku-65672504/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=300mm EL=320mm AL=350mm external thread SKU: 65672503](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl300mm-el320mm-al350mm-external-thread-sku-65672503/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=200mm EL=220mm AL=250mm external thread SKU: 65672502](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl200mm-el220mm-al250mm-external-thread-sku-65672502/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=600mm EL=610mm AL=630mm spring axle SKU: 65671506](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl600mm-el610mm-al630mm-spring-axle-sku-65671506/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=500mm EL=510mm AL=530mm spring axle SKU: 65671505](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl500mm-el510mm-al530mm-spring-axle-sku-65671505/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=400mm EL=410mm AL=430mm spring axle SKU: 65671504](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl400mm-el410mm-al430mm-spring-axle-sku-65671504/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=300mm EL=310mm AL=330mm spring axle SKU: 65671503](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl300mm-el310mm-al330mm-spring-axle-sku-65671503/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel Ø=50mm RL=200mm EL=210mm AL=230mm spring axle SKU: 65671502](https://maedler.in/product/conveyor-roller-s1-steel-o50mm-rl200mm-el210mm-al230mm-spring-axle-sku-65671502/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller K3 plastic blue Ø=63mm RL=600mm EL=619mm AL=649mm external thread SKU: 65654636](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o63mm-rl600mm-el619mm-al649mm-external-thread-sku-65654636/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=63mm RL=500mm EL=519mm AL=549mm external thread SKU: 65654635](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o63mm-rl500mm-el519mm-al549mm-external-thread-sku-65654635/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=63mm RL=400mm EL=419mm AL=449mm external thread SKU: 65654634](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o63mm-rl400mm-el419mm-al449mm-external-thread-sku-65654634/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=63mm RL=300mm EL=319mm AL=349mm external thread SKU: 65654633](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o63mm-rl300mm-el319mm-al349mm-external-thread-sku-65654633/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=63mm RL=200mm EL=219mm AL=249mm external thread SKU: 65654632](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o63mm-rl200mm-el219mm-al249mm-external-thread-sku-65654632/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=600mm EL=617mm AL=647mm external thread SKU: 65654506](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl600mm-el617mm-al647mm-external-thread-sku-65654506/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=500mm EL=517mm AL=547mm external thread SKU: 65654505](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl500mm-el517mm-al547mm-external-thread-sku-65654505/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=400mm EL=417mm AL=447mm external thread SKU: 65654504](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl400mm-el417mm-al447mm-external-thread-sku-65654504/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=300mm EL=317mm AL=347mm external thread SKU: 65654503](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl300mm-el317mm-al347mm-external-thread-sku-65654503/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=200mm EL=217mm AL=247mm external thread SKU: 65654502](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl200mm-el217mm-al247mm-external-thread-sku-65654502/): Material: Plastic conveyor roller, axle made of steel.Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and powered applications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=600mm EL=606mm AL=626mm spring axle SKU: 65653506](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl600mm-el606mm-al626mm-spring-axle-sku-65653506/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=500mm EL=506mm AL=526mm spring axle SKU: 65653505](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl500mm-el506mm-al526mm-spring-axle-sku-65653505/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=400mm EL=406mm AL=426mm spring axle SKU: 65653504](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl400mm-el406mm-al426mm-spring-axle-sku-65653504/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=300mm EL=306mm AL=326mm spring axle SKU: 65653503](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl300mm-el306mm-al326mm-spring-axle-sku-65653503/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K3 plastic blue Ø=50mm RL=200mm EL=206mm AL=226mm spring axle SKU: 65653502](https://maedler.in/product/conveyor-roller-k3-plastic-blue-o50mm-rl200mm-el206mm-al226mm-spring-axle-sku-65653502/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K2 plastic blue Ø=50mm RL=600mm EL=607mm AL=627mm spring axle SKU: 65652506](https://maedler.in/product/conveyor-roller-k2-plastic-blue-o50mm-rl600mm-el607mm-al627mm-spring-axle-sku-65652506/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K2 plastic blue Ø=50mm RL=500mm EL=507mm AL=527mm spring axle SKU: 65652505](https://maedler.in/product/conveyor-roller-k2-plastic-blue-o50mm-rl500mm-el507mm-al527mm-spring-axle-sku-65652505/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K2 plastic blue Ø=50mm RL=400mm EL=407mm AL=427mm spring axle SKU: 65652504](https://maedler.in/product/conveyor-roller-k2-plastic-blue-o50mm-rl400mm-el407mm-al427mm-spring-axle-sku-65652504/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K2 plastic blue Ø=50mm RL=300mm EL=307mm AL=327mm spring axle SKU: 65652503](https://maedler.in/product/conveyor-roller-k2-plastic-blue-o50mm-rl300mm-el307mm-al327mm-spring-axle-sku-65652503/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K2 plastic blue Ø=50mm RL=200mm EL=207mm AL=227mm spring axle SKU: 65652502](https://maedler.in/product/conveyor-roller-k2-plastic-blue-o50mm-rl200mm-el207mm-al227mm-spring-axle-sku-65652502/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=40mm RL=500mm EL=505mm AL=525mm spring axle SKU: 65651405](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o40mm-rl500mm-el505mm-al525mm-spring-axle-sku-65651405/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=40mm RL=400mm EL=405mm AL=425mm spring axle SKU: 65651404](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o40mm-rl400mm-el405mm-al425mm-spring-axle-sku-65651404/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=40mm RL=300mm EL=305mm AL=325mm spring axle SKU: 65651403](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o40mm-rl300mm-el305mm-al325mm-spring-axle-sku-65651403/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=40mm RL=200mm EL=205mm AL=225mm spring axle SKU: 65651402](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o40mm-rl200mm-el205mm-al225mm-spring-axle-sku-65651402/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=30mm RL=400mm EL=405mm AL=425mm spring axle SKU: 65651304](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o30mm-rl400mm-el405mm-al425mm-spring-axle-sku-65651304/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=30mm RL=300mm EL=305mm AL=325mm spring axle SKU: 65651303](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o30mm-rl300mm-el305mm-al325mm-spring-axle-sku-65651303/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=30mm RL=200mm EL=205mm AL=225mm spring axle SKU: 65651302](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o30mm-rl200mm-el205mm-al225mm-spring-axle-sku-65651302/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=20mm RL=400mm EL=405mm AL=421mm spring axle SKU: 65651204](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o20mm-rl400mm-el405mm-al421mm-spring-axle-sku-65651204/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=20mm RL=300mm EL=305mm AL=321mm spring axle SKU: 65651203](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o20mm-rl300mm-el305mm-al321mm-spring-axle-sku-65651203/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Conveyor roller K1 plastic blue Ø=20mm RL=200mm EL=205mm AL=221mm spring axle SKU: 65651202](https://maedler.in/product/conveyor-roller-k1-plastic-blue-o20mm-rl200mm-el205mm-al221mm-spring-axle-sku-65651202/): Material: Plastic conveyor roller, axle made of steel.K1: Bearings made of thermoplastic material with a row of steel balls.K2: Bearings made of thermoplastic material with two rows of steel balls for very smooth running. e.g. gravity operation.K3: Conveyor roller made of thermoplastic material with steel bearings and labyrinth seal for heavy duty and poweredapplications.*The load capacity is understood to be the surface load for installation in non-driven roller conveyors. - [Leveling foot 340.5 type NG M24 x 150mm long foot diameter 100mm stainless steel 1.4301 SKU: 65599777](https://maedler.in/product/leveling-foot-340-5-type-ng-m24-x-150mm-long-foot-diameter-100mm-stainless-steel-1-4301-sku-65599777/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M24 x 125mm long foot diameter 100mm stainless steel 1.4301 SKU: 65599776](https://maedler.in/product/leveling-foot-340-5-type-ng-m24-x-125mm-long-foot-diameter-100mm-stainless-steel-1-4301-sku-65599776/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M24 x 100mm long foot diameter 100mm stainless steel 1.4301 SKU: 65599775](https://maedler.in/product/leveling-foot-340-5-type-ng-m24-x-100mm-long-foot-diameter-100mm-stainless-steel-1-4301-sku-65599775/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M20 x 150mm long foot diameter 100mm stainless steel 1.4301 SKU: 65599774](https://maedler.in/product/leveling-foot-340-5-type-ng-m20-x-150mm-long-foot-diameter-100mm-stainless-steel-1-4301-sku-65599774/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M20 x 125mm long foot diameter 100mm stainless steel 1.4301 SKU: 65599773](https://maedler.in/product/leveling-foot-340-5-type-ng-m20-x-125mm-long-foot-diameter-100mm-stainless-steel-1-4301-sku-65599773/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M20 x 100mm long foot diameter 100mm stainless steel 1.4301 SKU: 65599772](https://maedler.in/product/leveling-foot-340-5-type-ng-m20-x-100mm-long-foot-diameter-100mm-stainless-steel-1-4301-sku-65599772/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M20 x 75mm long foot diameter 100mm stainless steel 1.4301 SKU: 65599771](https://maedler.in/product/leveling-foot-340-5-type-ng-m20-x-75mm-long-foot-diameter-100mm-stainless-steel-1-4301-sku-65599771/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M20 x 150mm long foot diameter 80mm stainless steel 1.4301 SKU: 65599768](https://maedler.in/product/leveling-foot-340-5-type-ng-m20-x-150mm-long-foot-diameter-80mm-stainless-steel-1-4301-sku-65599768/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M20 x 125mm long foot diameter 80mm stainless steel 1.4301 SKU: 65599767](https://maedler.in/product/leveling-foot-340-5-type-ng-m20-x-125mm-long-foot-diameter-80mm-stainless-steel-1-4301-sku-65599767/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M20 x 100mm long foot diameter 80mm stainless steel 1.4301 SKU: 65599766](https://maedler.in/product/leveling-foot-340-5-type-ng-m20-x-100mm-long-foot-diameter-80mm-stainless-steel-1-4301-sku-65599766/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M20 x 75mm long foot diameter 80mm stainless steel 1.4301 SKU: 65599765](https://maedler.in/product/leveling-foot-340-5-type-ng-m20-x-75mm-long-foot-diameter-80mm-stainless-steel-1-4301-sku-65599765/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 150mm long foot diameter 80mm stainless steel 1.4301 SKU: 65599764](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-150mm-long-foot-diameter-80mm-stainless-steel-1-4301-sku-65599764/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 125mm long foot diameter 80mm stainless steel 1.4301 SKU: 65599763](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-125mm-long-foot-diameter-80mm-stainless-steel-1-4301-sku-65599763/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 100mm long foot diameter 80mm stainless steel 1.4301 SKU: 65599762](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-100mm-long-foot-diameter-80mm-stainless-steel-1-4301-sku-65599762/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 75mm long foot diameter 80mm stainless steel 1.4301 SKU: 65599761](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-75mm-long-foot-diameter-80mm-stainless-steel-1-4301-sku-65599761/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 150mm long foot diameter 60mm stainless steel 1.4301 SKU: 65599754](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-150mm-long-foot-diameter-60mm-stainless-steel-1-4301-sku-65599754/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 125mm long foot diameter 60mm stainless steel 1.4301 SKU: 65599753](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-125mm-long-foot-diameter-60mm-stainless-steel-1-4301-sku-65599753/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 100mm long foot diameter 60mm stainless steel 1.4301 SKU: 65599752](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-100mm-long-foot-diameter-60mm-stainless-steel-1-4301-sku-65599752/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 75mm long foot diameter 60mm stainless steel 1.4301 SKU: 65599751](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-75mm-long-foot-diameter-60mm-stainless-steel-1-4301-sku-65599751/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 150mm long foot diameter 50mm stainless steel 1.4301 SKU: 65599744](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-150mm-long-foot-diameter-50mm-stainless-steel-1-4301-sku-65599744/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 125mm long foot diameter 50mm stainless steel 1.4301 SKU: 65599743](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-125mm-long-foot-diameter-50mm-stainless-steel-1-4301-sku-65599743/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 100mm long foot diameter 50mm stainless steel 1.4301 SKU: 65599742](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-100mm-long-foot-diameter-50mm-stainless-steel-1-4301-sku-65599742/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Leveling foot 340.5 type NG M16 x 75mm long foot diameter 50mm stainless steel 1.4301 SKU: 65599741](https://maedler.in/product/leveling-foot-340-5-type-ng-m16-x-75mm-long-foot-diameter-50mm-stainless-steel-1-4301-sku-65599741/): Material: Base: Stainless steel 1.4301 (AISI 304), bolt: Stainless steel 1.4305 (AISI 303). Type NG: with rubber pad from NBR, hardness 80º +/-5º Shore A, black.The bolt can be adjusted either at the hexagon at the upper end or at the spanner flats at the bottom end.With inlayed rubber pad in the steel foot is fixed by a screw. - [Spherical washer-and-seat combination diameter 60mm for bolt diameter 30mm stainless steel SKU: 65599430K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-60mm-for-bolt-diameter-30mm-stainless-steel-sku-65599430k/): Material: stainless steel 1.4301 (AISI 304).Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 48mm for bolt diameter 24mm stainless steel SKU: 65599424K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-48mm-for-bolt-diameter-24mm-stainless-steel-sku-65599424k/): Material: stainless steel 1.4301 (AISI 304).Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 40mm for bolt diameter 20mm stainless steel SKU: 65599420K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-40mm-for-bolt-diameter-20mm-stainless-steel-sku-65599420k/): Material: stainless steel 1.4301 (AISI 304).Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 32mm for bolt diameter 16mm stainless steel SKU: 65599416K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-32mm-for-bolt-diameter-16mm-stainless-steel-sku-65599416k/): Material: stainless steel 1.4301 (AISI 304).Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 25mm for bolt diameter 12mm stainless steel SKU: 65599412K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-25mm-for-bolt-diameter-12mm-stainless-steel-sku-65599412k/): Material: stainless steel 1.4301 (AISI 304).Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 21mm for bolt diameter 10mm stainless steel SKU: 65599410K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-21mm-for-bolt-diameter-10mm-stainless-steel-sku-65599410k/): Material: stainless steel 1.4301 (AISI 304).Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 17mm for bolt diameter 8mm stainless steel SKU: 65599408K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-17mm-for-bolt-diameter-8mm-stainless-steel-sku-65599408k/): Material: stainless steel 1.4301 (AISI 304).Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Spherical washer-and-seat combination diameter 13mm for bolt diameter 6mm stainless steel SKU: 65599406K](https://maedler.in/product/spherical-washer-and-seat-combination-diameter-13mm-for-bolt-diameter-6mm-stainless-steel-sku-65599406k/): Material: stainless steel 1.4301 (AISI 304).Spherical washer and conical seat are undetachable connected. The total height h is larger than parts like DIN 6319. Mostly, the outside diameter d4 is also bigger. Advantages: Easy to mount. Only one product required. - [Leveling foot 344.5 type NG M24 x 198mm long foot diameter 100mm bolt made from stainless steel SKU: 65599359](https://maedler.in/product/leveling-foot-344-5-type-ng-m24-x-198mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599359/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M24 x 158mm long foot diameter 100mm bolt made from stainless steel SKU: 65599358](https://maedler.in/product/leveling-foot-344-5-type-ng-m24-x-158mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599358/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M24 x 98mm long foot diameter 100mm bolt made from stainless steel SKU: 65599357](https://maedler.in/product/leveling-foot-344-5-type-ng-m24-x-98mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599357/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M20 x 158mm long foot diameter 100mm bolt made from stainless steel SKU: 65599356](https://maedler.in/product/leveling-foot-344-5-type-ng-m20-x-158mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599356/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M20 x 138mm long foot diameter 100mm bolt made from stainless steel SKU: 65599355](https://maedler.in/product/leveling-foot-344-5-type-ng-m20-x-138mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599355/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M20 x 98mm long foot diameter 100mm bolt made from stainless steel SKU: 65599354](https://maedler.in/product/leveling-foot-344-5-type-ng-m20-x-98mm-long-foot-diameter-100mm-bolt-made-from-stainless-steel-sku-65599354/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M20 x 158mm long foot diameter 80mm bolt made from stainless steel SKU: 65599353](https://maedler.in/product/leveling-foot-344-5-type-ng-m20-x-158mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599353/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M20 x 138mm long foot diameter 80mm bolt made from stainless steel SKU: 65599352](https://maedler.in/product/leveling-foot-344-5-type-ng-m20-x-138mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599352/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M20 x 98mm long foot diameter 80mm bolt made from stainless steel SKU: 65599351](https://maedler.in/product/leveling-foot-344-5-type-ng-m20-x-98mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599351/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M16 x 148mm long foot diameter 80mm bolt made from stainless steel SKU: 65599346](https://maedler.in/product/leveling-foot-344-5-type-ng-m16-x-148mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599346/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M16 x 108mm long foot diameter 80mm bolt made from stainless steel SKU: 65599345](https://maedler.in/product/leveling-foot-344-5-type-ng-m16-x-108mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599345/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M16 x 68mm long foot diameter 80mm bolt made from stainless steel SKU: 65599344](https://maedler.in/product/leveling-foot-344-5-type-ng-m16-x-68mm-long-foot-diameter-80mm-bolt-made-from-stainless-steel-sku-65599344/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M16 x 148mm long foot diameter 60mm bolt made from stainless steel SKU: 65599343](https://maedler.in/product/leveling-foot-344-5-type-ng-m16-x-148mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599343/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M16 x 108mm long foot diameter 60mm bolt made from stainless steel SKU: 65599342](https://maedler.in/product/leveling-foot-344-5-type-ng-m16-x-108mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599342/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M16 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599341](https://maedler.in/product/leveling-foot-344-5-type-ng-m16-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599341/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M14 x 148mm long foot diameter 60mm bolt made from stainless steel SKU: 65599340](https://maedler.in/product/leveling-foot-344-5-type-ng-m14-x-148mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599340/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M14 x 98mm long foot diameter 60mm bolt made from stainless steel SKU: 65599339](https://maedler.in/product/leveling-foot-344-5-type-ng-m14-x-98mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599339/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Leveling foot 344.5 type NG M14 x 68mm long foot diameter 60mm bolt made from stainless steel SKU: 65599338](https://maedler.in/product/leveling-foot-344-5-type-ng-m14-x-68mm-long-foot-diameter-60mm-bolt-made-from-stainless-steel-sku-65599338/): Material: Base: plastic (polyamide), glass-fibre reinforced, matt finish black. Bolt: Stainless steel 1.4305 (AISI 303). Rubber pad: NBR (perbunan) 70° Shore hardness, black. Type N: without rubber pad. Type NG: with rubber pad. The feet is slightly stepped. This makes it look good and easy to clean. Due to the use of a high grade plastic material and their shape (ribbed base), that serves to spread the weight over a larger area, the feet have a high load bearing capacity. The rubber pad is fixed to the base with four pins/bores. The rubber pad levels out slightly uneven ground and makes the foot non-slip. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681830](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681830/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681825](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681825/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 18 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681820](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-18-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681820/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681735](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681735/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681730](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681730/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681725](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681725/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 17 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681720](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-17-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681720/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681635](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681635/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681630](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681630/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681625](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681625/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 16 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681620](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-16-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681620/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 35H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681535](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-35h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681535/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681530](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681530/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681525](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681525/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 15 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681520](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-15-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681520/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 14 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681430](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-14-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681430/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 14 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681425](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-14-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681425/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 14 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681420](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-14-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681420/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 13 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681330](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-13-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681330/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 13 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681325](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-13-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681325/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 13 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681320](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-13-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681320/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 12 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681230](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-12-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681230/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 12 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681225](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-12-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681225/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 12 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681220](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-12-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681220/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 11 teeth material steel bore 30H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681130](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-11-teeth-material-steel-bore-30h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681130/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 11 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681125](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-11-teeth-material-steel-bore-25h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681125/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double-strand sprocket ZRF with hub 10 B-2 11 teeth material steel bore 20H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened SKU: 12681120](https://maedler.in/product/double-strand-sprocket-zrf-with-hub-10-b-2-11-teeth-material-steel-bore-20h7-keyway-din-6885-1-2-set-screw-threads-teeth-induction-hardened-sku-12681120/): Material: Steel C45.Ready-to-install, for various shaft diameters. Teeth milled and induction hardened (approx. HRC 50), custom bore H7 - surface parameter Ra 1.6, keyway in accordance with DIN 6885/1 positioned beneath tip of tooth, 2 threads for set screws, one positioned for the keyway, one offset by 90°. - [Double sprocket ZRET for 2 single roller chains 10 B-1 25 teeth material steel for taper-bush 2012 SKU: 12677425](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-for-taper-bush-2012-sku-12677425/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 23 teeth material steel for taper-bush 2012 SKU: 12677423](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-for-taper-bush-2012-sku-12677423/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 21 teeth material steel for taper-bush 2012 SKU: 12677421](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-for-taper-bush-2012-sku-12677421/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 20 teeth material steel for taper-bush 1610 SKU: 12677420](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-for-taper-bush-1610-sku-12677420/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 19 teeth material steel for taper-bush 1610 SKU: 12677419](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-for-taper-bush-1610-sku-12677419/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 18 teeth material steel for taper-bush 1610 SKU: 12677418](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-for-taper-bush-1610-sku-12677418/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 17 teeth material steel for taper-bush 1610 SKU: 12677417](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-for-taper-bush-1610-sku-12677417/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 16 teeth material steel for taper-bush 1210 SKU: 12677416](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-for-taper-bush-1210-sku-12677416/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 15 teeth material steel for taper-bush 1210 SKU: 12677415](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-for-taper-bush-1210-sku-12677415/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 14 teeth material steel for taper-bush 1108 SKU: 12677414](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-for-taper-bush-1108-sku-12677414/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 13 teeth material steel for taper-bush 1108 SKU: 12677413](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-for-taper-bush-1108-sku-12677413/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRET for 2 single roller chains 10 B-1 12 teeth material steel for taper-bush 1108 SKU: 12677412](https://maedler.in/product/double-sprocket-zret-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-for-taper-bush-1108-sku-12677412/): Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately, see page 76. Material: Steel C45, not hardened. Teeth milled. Double-Sprockets for transmitting the power from a driving chain to a parallel running driven chain, e.g. at roller conveyors. Version for taper bushes, for easy and fast mounting. The taper bush has to be ordered separately. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 95 teeth material cast iron for taper bush type 3020 SKU: 12677183G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-95-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12677183g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 76 teeth material cast iron for taper bush type 3020 SKU: 12677176G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-76-teeth-material-cast-iron-for-taper-bush-type-3020-sku-12677176g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 57 teeth material cast iron for taper bush type 2517 SKU: 12677157G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-57-teeth-material-cast-iron-for-taper-bush-type-2517-sku-12677157g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 45 teeth material cast iron for taper bush type 2517 SKU: 12677145G](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-45-teeth-material-cast-iron-for-taper-bush-type-2517-sku-12677145g/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 38 teeth material steel for taper bush type 2517 SKU: 12677138](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-38-teeth-material-steel-for-taper-bush-type-2517-sku-12677138/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 30 teeth material steel for taper bush type 2012 SKU: 12677130](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-30-teeth-material-steel-for-taper-bush-type-2012-sku-12677130/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 28 teeth material steel for taper bush type 2012 SKU: 12677128](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-28-teeth-material-steel-for-taper-bush-type-2012-sku-12677128/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 27 teeth material steel for taper bush type 2012 SKU: 12677127](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-27-teeth-material-steel-for-taper-bush-type-2012-sku-12677127/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 25 teeth material steel for taper bush type 2012 SKU: 12677125](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-25-teeth-material-steel-for-taper-bush-type-2012-sku-12677125/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 24 teeth material steel for taper bush type 2012 SKU: 12677124](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-24-teeth-material-steel-for-taper-bush-type-2012-sku-12677124/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 23 teeth material steel for taper bush type 1610 SKU: 12677123](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-23-teeth-material-steel-for-taper-bush-type-1610-sku-12677123/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 22 teeth material steel for taper bush type 1610 SKU: 12677122](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-22-teeth-material-steel-for-taper-bush-type-1610-sku-12677122/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 21 teeth material steel for taper bush type 1610 SKU: 12677121](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-21-teeth-material-steel-for-taper-bush-type-1610-sku-12677121/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 20 teeth material steel for taper bush type 1610 SKU: 12677120](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-20-teeth-material-steel-for-taper-bush-type-1610-sku-12677120/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 19 teeth material steel for taper bush type 1610 SKU: 12677119](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-19-teeth-material-steel-for-taper-bush-type-1610-sku-12677119/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 18 teeth material steel for taper bush type 1610 SKU: 12677118](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-18-teeth-material-steel-for-taper-bush-type-1610-sku-12677118/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 17 teeth material steel for taper bush type 1610 SKU: 12677117](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-17-teeth-material-steel-for-taper-bush-type-1610-sku-12677117/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 16 teeth material steel for taper bush type 1610 SKU: 12677116](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-16-teeth-material-steel-for-taper-bush-type-1610-sku-12677116/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double-strand sprocket ZRT 10 B-2 5/8x3/8" 15 teeth material steel for taper bush type 1210 SKU: 12677115](https://maedler.in/product/double-strand-sprocket-zrt-10-b-2-5-8x3-8-15-teeth-material-steel-for-taper-bush-type-1210-sku-12677115/): Material:: Steel C45, not hardened. Product numbers ending with G are from grey cast iron GG25. Prepared for Taper clamping bush. General dimensions: B1 = 9,1 mm, B2 = 25,5 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. In this youtube video we show the mounting and demounting of taper bushes: Video clip (3.5 Minutes) - [Double sprocket ZRE for 2 single roller chains 10 B-1 25 teeth material steel SKU: 12642500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-25-teeth-material-steel-sku-12642500/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 23 teeth material steel SKU: 12642300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-23-teeth-material-steel-sku-12642300/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 21 teeth material steel SKU: 12642100](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-21-teeth-material-steel-sku-12642100/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 20 teeth material steel SKU: 12642000](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-20-teeth-material-steel-sku-12642000/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 19 teeth material steel SKU: 12641900](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-19-teeth-material-steel-sku-12641900/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 18 teeth material steel SKU: 12641800](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-18-teeth-material-steel-sku-12641800/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 17 teeth material steel SKU: 12641700](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-17-teeth-material-steel-sku-12641700/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 16 teeth material steel SKU: 12641600](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-16-teeth-material-steel-sku-12641600/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 15 teeth material steel SKU: 12641500](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-15-teeth-material-steel-sku-12641500/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 14 teeth material steel SKU: 12641400](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-14-teeth-material-steel-sku-12641400/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 13 teeth material steel SKU: 12641300](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-13-teeth-material-steel-sku-12641300/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double sprocket ZRE for 2 single roller chains 10 B-1 12 teeth material steel SKU: 12641200](https://maedler.in/product/double-sprocket-zre-for-2-single-roller-chains-10-b-1-12-teeth-material-steel-sku-12641200/): Material: Steel C45, not hardened. Pre-bored. Pitch 5/8 x 3/8" General dimensions: B1 = 9,1 mm, c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 114 teeth material steel SKU: 12628800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-114-teeth-material-steel-sku-12628800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 95 teeth material steel SKU: 12628300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-95-teeth-material-steel-sku-12628300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 76 teeth material steel SKU: 12627600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-76-teeth-material-steel-sku-12627600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 57 teeth material steel SKU: 12625700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-57-teeth-material-steel-sku-12625700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 48 teeth material steel SKU: 12624800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-48-teeth-material-steel-sku-12624800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 45 teeth material steel SKU: 12624500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-45-teeth-material-steel-sku-12624500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 38 teeth material steel SKU: 12623800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-38-teeth-material-steel-sku-12623800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 35 teeth material steel SKU: 12623500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-35-teeth-material-steel-sku-12623500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 30 teeth material steel SKU: 12623000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-30-teeth-material-steel-sku-12623000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 28 teeth material steel SKU: 12622800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-28-teeth-material-steel-sku-12622800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 27 teeth material steel SKU: 12622700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-27-teeth-material-steel-sku-12622700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 26 teeth material steel SKU: 12622600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-26-teeth-material-steel-sku-12622600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 24 teeth material steel SKU: 12622400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-24-teeth-material-steel-sku-12622400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 22 teeth material steel SKU: 12622200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-22-teeth-material-steel-sku-12622200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 21 teeth material steel SKU: 12622100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-21-teeth-material-steel-sku-12622100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 20 teeth material steel SKU: 12622000](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-20-teeth-material-steel-sku-12622000/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 19 teeth material steel SKU: 12621900](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-19-teeth-material-steel-sku-12621900/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 18 teeth material steel SKU: 12621800](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-18-teeth-material-steel-sku-12621800/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 17 teeth material steel SKU: 12621700](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-17-teeth-material-steel-sku-12621700/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 16 teeth material steel SKU: 12621600](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-16-teeth-material-steel-sku-12621600/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 15 teeth material steel SKU: 12621500](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-15-teeth-material-steel-sku-12621500/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 14 teeth material steel SKU: 12621400](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-14-teeth-material-steel-sku-12621400/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 13 teeth material steel SKU: 12621300](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-13-teeth-material-steel-sku-12621300/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 12 teeth material steel SKU: 12621200](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-12-teeth-material-steel-sku-12621200/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand plate wheel ZRL without hub 10 B-2 5/8x3/8" 11 teeth material steel SKU: 12621100](https://maedler.in/product/double-strand-plate-wheel-zrl-without-hub-10-b-2-5-8x3-8-11-teeth-material-steel-sku-12621100/): Material: Low-carbon steel, not hardable. Pre-bored. General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm. Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 114 teeth material cast iron SKU: 12618800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-114-teeth-material-cast-iron-sku-12618800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 95 teeth material cast iron SKU: 12618300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-95-teeth-material-cast-iron-sku-12618300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 76 teeth material cast iron SKU: 12617600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-76-teeth-material-cast-iron-sku-12617600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 57 teeth material cast iron SKU: 12615700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-57-teeth-material-cast-iron-sku-12615700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 10 B-2 5/8x3/8" 45 teeth material cast iron SKU: 12614500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-10-b-2-5-8x3-8-45-teeth-material-cast-iron-sku-12614500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 9,0 mm, B2 = 25,5 mm c = 1,6 mm, r3 = 16 mm.Other dimensions: See the table. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm open (unsealed) SKU: 6206-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-open-unsealed-sku-6206-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 30mm outer diameter 62mm width 16mm open (unsealed) clearance C3 SKU: 6206-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-30mm-outer-diameter-62mm-width-16mm-open-unsealed-clearance-c3-sku-6206-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Pillow block bearing igus igubal ESTM-30 bore 30mm SKU: 62055130](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-30-bore-30mm-sku-62055130/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-25 bore 25mm SKU: 62055125](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-25-bore-25mm-sku-62055125/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-20 bore 20mm SKU: 62055120](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-20-bore-20mm-sku-62055120/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-16 bore 16mm SKU: 62055116](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-16-bore-16mm-sku-62055116/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-12 bore 12mm SKU: 62055112](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-12-bore-12mm-sku-62055112/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-10 bore 10mm SKU: 62055110](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-10-bore-10mm-sku-62055110/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal ESTM-08 bore 8mm SKU: 62055108](https://maedler.in/product/pillow-block-bearing-igus-igubal-estm-08-bore-8mm-sku-62055108/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal KSTM-25 bore 25mm SKU: 62055025](https://maedler.in/product/pillow-block-bearing-igus-igubal-kstm-25-bore-25mm-sku-62055025/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal KSTM-20 bore 20mm SKU: 62055020](https://maedler.in/product/pillow-block-bearing-igus-igubal-kstm-20-bore-20mm-sku-62055020/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [Pillow block bearing igus igubal KSTM-10 bore 10mm SKU: 62055010](https://maedler.in/product/pillow-block-bearing-igus-igubal-kstm-10-bore-10mm-sku-62055010/): Material spherical ball: iglidur® W300, yellowish. Material housing: igumid® G, black. Maintenance-free, silent running and anti-vibrating. High strength at very low weight. Resistant against corrosion and many chemicals. Electrical and thermal isolating. The shaft must rotate inside the bore of the spherical ball. With a metal shaft, a sliding speed up to 30 m/min. may be possible. The spherical ball may only compensate shaft misalignement. Temperature range: -30º to +80ºC. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm shielded on both sides SKU: 6205-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-sku-6205-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm shielded on both sides clearance C3 SKU: 6205-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-clearance-c3-sku-6205-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm sealed on both sides SKU: 6205-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-sku-6205-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm sealed on both sides SKU: 6205-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-sku-6205-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm sealed on both sides clearance C3 SKU: 6205-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-clearance-c3-sku-6205-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm sealed on both sides clearance C3 SKU: 6205-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-sealed-on-both-sides-clearance-c3-sku-6205-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm shielded on both sides SKU: 6205-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-sku-6205-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm shielded on both sides clearance C3 SKU: 6205-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-shielded-on-both-sides-clearance-c3-sku-6205-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm open (unsealed) SKU: 6205-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-open-unsealed-sku-6205-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 25mm outer diameter 52mm width 15mm open (unsealed) clearance C3 SKU: 6205-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-25mm-outer-diameter-52mm-width-15mm-open-unsealed-clearance-c3-sku-6205-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm shielded on both sides SKU: 6204-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-sku-6204-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm shielded on both sides clearance C3 SKU: 6204-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-clearance-c3-sku-6204-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm sealed on both sides SKU: 6204-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-sku-6204-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm sealed on both sides SKU: 6204-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-sku-6204-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm sealed on both sides clearance C3 SKU: 6204-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-clearance-c3-sku-6204-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm sealed on both sides clearance C3 SKU: 6204-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-sealed-on-both-sides-clearance-c3-sku-6204-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm shielded on both sides SKU: 6204-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-sku-6204-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm shielded on both sides clearance C3 SKU: 6204-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-shielded-on-both-sides-clearance-c3-sku-6204-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm open (unsealed) SKU: 6204-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-open-unsealed-sku-6204-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 20mm outer diameter 47mm width 14mm open (unsealed) clearance C3 SKU: 6204-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-20mm-outer-diameter-47mm-width-14mm-open-unsealed-clearance-c3-sku-6204-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 80mm D10 SKU: 62038000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-80mm-d10-sku-62038000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 70mm D10 SKU: 62037000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-70mm-d10-sku-62037000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 60mm D10 SKU: 62036000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-60mm-d10-sku-62036000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 50mm D10 SKU: 62035000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-50mm-d10-sku-62035000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 45mm D10 SKU: 62034500](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-45mm-d10-sku-62034500/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 40mm D10 SKU: 62034000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-40mm-d10-sku-62034000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 35mm D10 SKU: 62033500](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-35mm-d10-sku-62033500/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 30mm D10 SKU: 62033000](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-30mm-d10-sku-62033000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Cap bearing DIN 505 version L with bearing shells made of red brass bore 25mm D10 SKU: 62032500](https://maedler.in/product/cap-bearing-din-505-version-l-with-bearing-shells-made-of-red-brass-bore-25mm-d10-sku-62032500/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm shielded on both sides SKU: 6203-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-shielded-on-both-sides-sku-6203-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm shielded on both sides clearance C3 SKU: 6203-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6203-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm sealed on both sides SKU: 6203-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sealed-on-both-sides-sku-6203-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm sealed on both sides SKU: 6203-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sealed-on-both-sides-sku-6203-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm sealed on both sides clearance C3 SKU: 6203-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6203-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm sealed on both sides clearance C3 SKU: 6203-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-sealed-on-both-sides-clearance-c3-sku-6203-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm shielded on both sides SKU: 6203-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-shielded-on-both-sides-sku-6203-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm shielded on both sides clearance C3 SKU: 6203-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-shielded-on-both-sides-clearance-c3-sku-6203-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm open (unsealed) SKU: 6203-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-open-unsealed-sku-6203-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 17mm outer diameter 40mm width 12mm open (unsealed) clearance C3 SKU: 6203-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-17mm-outer-diameter-40mm-width-12mm-open-unsealed-clearance-c3-sku-6203-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 80mm D10 material grey cast iron SKU: 62028000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-80mm-d10-material-grey-cast-iron-sku-62028000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 70mm D10 material grey cast iron SKU: 62027000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-70mm-d10-material-grey-cast-iron-sku-62027000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 60mm D10 material grey cast iron SKU: 62026000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-60mm-d10-material-grey-cast-iron-sku-62026000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 50mm D10 material grey cast iron SKU: 62025000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-50mm-d10-material-grey-cast-iron-sku-62025000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 45mm D10 material grey cast iron SKU: 62024500](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-45mm-d10-material-grey-cast-iron-sku-62024500/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 40mm D10 material grey cast iron SKU: 62024000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-40mm-d10-material-grey-cast-iron-sku-62024000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 35mm D10 material grey cast iron SKU: 62023500](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-35mm-d10-material-grey-cast-iron-sku-62023500/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 30mm D10 material grey cast iron SKU: 62023000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-30mm-d10-material-grey-cast-iron-sku-62023000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 25mm D10 material grey cast iron SKU: 62022500](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-25mm-d10-material-grey-cast-iron-sku-62022500/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [Heavy-duty pillow block bearing DIN 504 B without bush bore 20mm D10 material grey cast iron SKU: 62022000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-b-without-bush-bore-20mm-d10-material-grey-cast-iron-sku-62022000/): Material: Grey Cast Iron GG25. Bore Tolerance: ISO D7. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm shielded on both sides SKU: 6202-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-sku-6202-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm shielded on both sides clearance C3 SKU: 6202-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-clearance-c3-sku-6202-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm sealed on both sides SKU: 6202-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-sku-6202-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm sealed on both sides SKU: 6202-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-sku-6202-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm sealed on both sides clearance C3 SKU: 6202-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-clearance-c3-sku-6202-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm sealed on both sides clearance C3 SKU: 6202-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-sealed-on-both-sides-clearance-c3-sku-6202-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm shielded on both sides SKU: 6202-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-sku-6202-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm shielded on both sides clearance C3 SKU: 6202-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-shielded-on-both-sides-clearance-c3-sku-6202-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm open (unsealed) SKU: 6202-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-open-unsealed-sku-6202-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 15mm outer diameter 35mm width 11mm open (unsealed) clearance C3 SKU: 6202-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-15mm-outer-diameter-35mm-width-11mm-open-unsealed-clearance-c3-sku-6202-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 80mm D10 material grey cast iron SKU: 62018000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-80mm-d10-material-grey-cast-iron-sku-62018000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 70mm D10 material grey cast iron SKU: 62017000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-70mm-d10-material-grey-cast-iron-sku-62017000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 60mm D10 material grey cast iron SKU: 62016000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-60mm-d10-material-grey-cast-iron-sku-62016000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 50mm D10 material grey cast iron SKU: 62015000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-50mm-d10-material-grey-cast-iron-sku-62015000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 40mm D10 material grey cast iron SKU: 62014000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-40mm-d10-material-grey-cast-iron-sku-62014000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 30mm D10 material grey cast iron SKU: 62013000](https://maedler.in/product/heavy-duty-pillow-block-bearing-din-504-a-with-red-brass-bush-bore-30mm-d10-material-grey-cast-iron-sku-62013000/): Material: Grey Cast Iron GG25. Bush red brass Rg7 (CuSn7Zn4Pb7-C). Bore Tolerance: ISO D10. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm shielded on both sides SKU: 6201-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-shielded-on-both-sides-sku-6201-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm shielded on both sides clearance C3 SKU: 6201-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-shielded-on-both-sides-clearance-c3-sku-6201-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm sealed on both sides SKU: 6201-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sealed-on-both-sides-sku-6201-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm sealed on both sides SKU: 6201-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sealed-on-both-sides-sku-6201-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm sealed on both sides clearance C3 SKU: 6201-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sealed-on-both-sides-clearance-c3-sku-6201-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm sealed on both sides clearance C3 SKU: 6201-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-sealed-on-both-sides-clearance-c3-sku-6201-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm shielded on both sides SKU: 6201-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-shielded-on-both-sides-sku-6201-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm shielded on both sides clearance C3 SKU: 6201-ZZ-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-shielded-on-both-sides-clearance-c3-sku-6201-zz-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm open (unsealed) SKU: 6201-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-open-unsealed-sku-6201-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 12mm outer diameter 32mm width 10mm open (unsealed) clearance C3 SKU: 6201-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-12mm-outer-diameter-32mm-width-10mm-open-unsealed-clearance-c3-sku-6201-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Light-duty pillow block bearing HM bore 40mm D9 material grey cast iron SKU: 62004000](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-40mm-d9-material-grey-cast-iron-sku-62004000/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [Light-duty pillow block bearing HM bore 35mm D9 material grey cast iron SKU: 62003500](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-35mm-d9-material-grey-cast-iron-sku-62003500/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [Light-duty pillow block bearing HM bore 30mm D9 material grey cast iron SKU: 62003000](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-30mm-d9-material-grey-cast-iron-sku-62003000/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [Light-duty pillow block bearing HM bore 25mm D9 material grey cast iron SKU: 62002500](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-25mm-d9-material-grey-cast-iron-sku-62002500/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [Light-duty pillow block bearing HM bore 20mm D9 material grey cast iron SKU: 62002000](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-20mm-d9-material-grey-cast-iron-sku-62002000/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm shielded on both sides SKU: 6200-2Z-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-shielded-on-both-sides-sku-6200-2z-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm shielded on both sides clearance C3 SKU: 6200-2Z-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-shielded-on-both-sides-clearance-c3-sku-6200-2z-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm sealed on both sides SKU: 6200-2RS-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sealed-on-both-sides-sku-6200-2rs-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm sealed on both sides SKU: 6200-2RSH-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sealed-on-both-sides-sku-6200-2rsh-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C. Other versions or other bearing types on request. - [SKF deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm sealed on both sides clearance C3 SKU: 6200-2RSH-C3-SKF](https://maedler.in/product/skf-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sealed-on-both-sides-clearance-c3-sku-6200-2rsh-c3-skf/): Single row deep groove radial ball bearingsMaterial: Bearing steel.- Standard ball bearings in premium-quality.- Most common bearing type.- Usable for high speed. - Insensitive in use and maintenance. - On choice: Open, with friction-free metal shields 2Z (= ZZ). or with contacting rubber seals 2RS1 / 2RSH.Temperature range: -30°C to +90°C (caused by type of lubrication), short-term up to +110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm sealed on both sides clearance C3 SKU: 6200-2RS-C3-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-sealed-on-both-sides-clearance-c3-sku-6200-2rs-c3-mae/): Single row deep groove radial ball bearingsMaterial: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C.Clearance C3: Greater play.Other versions or other bearing types on request. - [Light-duty pillow block bearing HM bore 15mm D9 material grey cast iron SKU: 62001500](https://maedler.in/product/light-duty-pillow-block-bearing-hm-bore-15mm-d9-material-grey-cast-iron-sku-62001500/): Material: Grey Cast Iron GG25. With Bores for Drive-In Oiler. Bore tolerance: ISO D9. Up to size 20 with slot holes for fixing. - [MAEDLER deep groove ball bearing single row inner diameter 10mm outer diameter 30mm width 9mm shielded on both sides SKU: 6200-ZZ-MAE](https://maedler.in/product/maedler-deep-groove-ball-bearing-single-row-inner-diameter-10mm-outer-diameter-30mm-width-9mm-shielded-on-both-sides-sku-6200-zz-mae/): Single row deep groove radial ball bearings Material: Bearing steel. - Standard ball bearings in high quality. - Most common bearing type. - Usable for high speed. - Insensitive in use and maintenance. - On choice: With friction-free metal shields ZZ (= 2Z) or with contacting rubber seals 2RS. Temperature range: -20°C to +90°C (caused by type of lubrication), short-term up to 110°C. Other versions or other bearing types on request. - [Socket pins with spring-loaded balls diameter 10mm l1 = 40mm SKU: 66681040](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-10mm-l1-40mm-sku-66681040/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 10mm l1 = 30mm SKU: 66681030](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-10mm-l1-30mm-sku-66681030/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 10mm l1 = 20mm SKU: 66681020](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-10mm-l1-20mm-sku-66681020/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 8mm l1 = 50mm SKU: 66680850](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-8mm-l1-50mm-sku-66680850/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 8mm l1 = 40mm SKU: 66680840](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-8mm-l1-40mm-sku-66680840/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 8mm l1 = 30mm SKU: 66680830](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-8mm-l1-30mm-sku-66680830/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 8mm l1 = 20mm SKU: 66680820](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-8mm-l1-20mm-sku-66680820/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 6mm l1 = 50mm SKU: 66680650](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-6mm-l1-50mm-sku-66680650/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 6mm l1 = 40mm SKU: 66680640](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-6mm-l1-40mm-sku-66680640/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 6mm l1 = 30mm SKU: 66680630](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-6mm-l1-30mm-sku-66680630/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 6mm l1 = 20mm SKU: 66680620](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-6mm-l1-20mm-sku-66680620/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Socket pins with spring-loaded balls diameter 6mm l1 = 10mm SKU: 66680610](https://maedler.in/product/socket-pins-with-spring-loaded-balls-diameter-6mm-l1-10mm-sku-66680610/): Material: Pin part: stainless steel 1.4542 hardened. With Spring-Loaded Balls. Handle: Plastic (PA6). Spring: stainless steel. Press = release. Loosen = lock. For quick fastening and securing of parts and workpieces. Fast and easily released for frequently repeated actions, e.g., replaceable bearing pins. Temperature range: -30° / +80° C. *rupture limi - [Foldable handle type CR 180mm SKU: 66668800](https://maedler.in/product/foldable-handle-type-cr-180mm-sku-66668800/): Material: Version CR: Steel, chrome plated. Version NI: 1.4305 (AISI 303), blasted, matt finish. These folding handles are mainly used in applications where the handle should not stick out, or where sticking out should be kept to a minimum. The handle is locked in both end positions by a spring-loaded pressure pin. Hexagon nuts and washers are included in the delivery. - [Foldable handle type CR 120mm SKU: 66668200](https://maedler.in/product/foldable-handle-type-cr-120mm-sku-66668200/): Material: Version CR: Steel, chrome plated. Version NI: 1.4305 (AISI 303), blasted, matt finish. These folding handles are mainly used in applications where the handle should not stick out, or where sticking out should be kept to a minimum. The handle is locked in both end positions by a spring-loaded pressure pin. Hexagon nuts and washers are included in the delivery. - [Foldable handle type CR 100mm SKU: 66668000](https://maedler.in/product/foldable-handle-type-cr-100mm-sku-66668000/): Material: Version CR: Steel, chrome plated. Version NI: 1.4305 (AISI 303), blasted, matt finish. These folding handles are mainly used in applications where the handle should not stick out, or where sticking out should be kept to a minimum. The handle is locked in both end positions by a spring-loaded pressure pin. Hexagon nuts and washers are included in the delivery. - [Folding handle with recessed tray handle 425.4 SKU: 66655000](https://maedler.in/product/folding-handle-with-recessed-tray-handle-425-4-sku-66655000/): Material: Folding handle made from steel, chrome plated. Tray: Zinc die-cast, plastic coated, black. The folding handle with recessed tray 425.4 is used in applications where the folded handle must not stick out, or where the sticking out must be max. 3 mm. In addition, screws M4 are sufficient for mounting the handle on the housing. Handle and folding mechanism are made from chrome-plated steel and the tray is made from zinc die-cast. This gives the folding handle additional strength (supplied as complete assembly). - [Double sided clamping nut M20 stainless steel 1.4305 SKU: 66599470](https://maedler.in/product/double-sided-clamping-nut-m20-stainless-steel-1-4305-sku-66599470/): Material: Stainless steel 1.4305 blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [Double sided clamping nut M16 stainless steel 1.4305 SKU: 66599466](https://maedler.in/product/double-sided-clamping-nut-m16-stainless-steel-1-4305-sku-66599466/): Material: Stainless steel 1.4305 blasted, matt finish finish. Shaft butt-welded on. A rationalised production process and material-saving design have made these clamp nuts with double lever an extremely cost-efficient clamping element. - [Cylindrical clamping nut M20 stainless steel 1.4305 SKU: 66599420](https://maedler.in/product/cylindrical-clamping-nut-m20-stainless-steel-1-4305-sku-66599420/): Material: Stainless steel 1.4305 blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Cylindrical clamping nut M10 stainless steel 1.4305 SKU: 66599410](https://maedler.in/product/cylindrical-clamping-nut-m10-stainless-steel-1-4305-sku-66599410/): Material: Stainless steel 1.4305 blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Cylindrical clamping nut M8 stainless steel 1.4305 SKU: 66599408](https://maedler.in/product/cylindrical-clamping-nut-m8-stainless-steel-1-4305-sku-66599408/): Material: Stainless steel 1.4305 blasted, matt finish finish. Shaft butt-welded on. These clamp nuts are a modified version of the common ball knobs DIN 99. A rationalised production process and material-saving design have made these clamp nuts an extremely cost-efficient clamping element. - [Ball knob DIN319 version C made from stainless steel ball diameter 40mm thread M10 SKU: 66499440](https://maedler.in/product/ball-knob-din319-version-c-made-from-stainless-steel-ball-diameter-40mm-thread-m10-sku-66499440/): Material: Stainless steel 1.4305, matt blasted. Ball knobs with dimensions according to DIN 319, made from metal. - [Revolving ball knob 3192 diameter 50mm SKU: 66455000](https://maedler.in/product/revolving-ball-knob-3192-diameter-50mm-sku-66455000/): Material: Duroplast PF31 black glossy finish. Bolt: Steel, zinc plated. Revolving ball knobs can be used instead of revolving handles, e.g., for handwheels and hand cranks. Revolving ball knobs have the same connecting dimensions as handles DIN 39 and DIN 98. - [Revolving ball knob 3192 diameter 40mm SKU: 66454000](https://maedler.in/product/revolving-ball-knob-3192-diameter-40mm-sku-66454000/): Material: Duroplast PF31 black glossy finish. Bolt: Steel, zinc plated. Revolving ball knobs can be used instead of revolving handles, e.g., for handwheels and hand cranks. Revolving ball knobs have the same connecting dimensions as handles DIN 39 and DIN 98. - [Revolving ball knob 3192 diameter 32mm SKU: 66453200](https://maedler.in/product/revolving-ball-knob-3192-diameter-32mm-sku-66453200/): Material: Duroplast PF31 black glossy finish. Bolt: Steel, zinc plated. Revolving ball knobs can be used instead of revolving handles, e.g., for handwheels and hand cranks. Revolving ball knobs have the same connecting dimensions as handles DIN 39 and DIN 98. - [Revolving ball knob 3192 diameter 25mm SKU: 66452500](https://maedler.in/product/revolving-ball-knob-3192-diameter-25mm-sku-66452500/): Material: Duroplast PF31 black glossy finish. Bolt: Steel, zinc plated. Revolving ball knobs can be used instead of revolving handles, e.g., for handwheels and hand cranks. Revolving ball knobs have the same connecting dimensions as handles DIN 39 and DIN 98. - [Retractable handle NG version N handle diameter 28mm made from plastic thread M8 folding mechanism stainless steel SKU: 66399202](https://maedler.in/product/retractable-handle-ng-version-n-handle-diameter-28mm-made-from-plastic-thread-m8-folding-mechanism-stainless-steel-sku-66399202/): Material Version K: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Steel, black oxide finish.Material Version N: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Stainless steel 1.4305 (AISI 303).All handles are revolving (type 598).Retractable handles are used when the handle must at times not stick out.The handle is pulled out of its taper seating and then tilted. A compression spring locks the handle in both end positions. When folded back, the handle automatically firmly locks in the taper seat. - [Retractable handle NG version N handle diameter 26mm made from plastic thread M6 folding mechanism stainless steel SKU: 66399201](https://maedler.in/product/retractable-handle-ng-version-n-handle-diameter-26mm-made-from-plastic-thread-m6-folding-mechanism-stainless-steel-sku-66399201/): Material Version K: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Steel, black oxide finish.Material Version N: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Stainless steel 1.4305 (AISI 303).All handles are revolving (type 598).Retractable handles are used when the handle must at times not stick out.The handle is pulled out of its taper seating and then tilted. A compression spring locks the handle in both end positions. When folded back, the handle automatically firmly locks in the taper seat. - [Revolving cylindrical handle 598 made from plastic diameter 31 mm type N with thread plug M12 stainless SKU: 66353100](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-31-mm-type-n-with-thread-plug-m12-stainless-sku-66353100/): Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 28 mm type N with thread plug M10 stainless SKU: 66352800](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-28-mm-type-n-with-thread-plug-m10-stainless-sku-66352800/): Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 26 mm type N with thread plug M10 stainless SKU: 66352600](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-26-mm-type-n-with-thread-plug-m10-stainless-sku-66352600/): Material: Version K: Duroplast PF31, black, glossy finish. Spindle: Steel, zinc-plated Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303). Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 23 mm type N with thread plug M8 stainless SKU: 66352300](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-23-mm-type-n-with-thread-plug-m8-stainless-sku-66352300/): Material: Version K: Duroplast PF31, black, glossy finish. Spindle: Steel, zinc-plated Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303). Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 21 mm type N with thread plug M6 stainless SKU: 66352100](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-21-mm-type-n-with-thread-plug-m6-stainless-sku-66352100/): Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 18 mm type N with thread plug M6 stainless SKU: 66351800](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-18-mm-type-n-with-thread-plug-m6-stainless-sku-66351800/): Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 31 mm type K with thread plug M12 zinc coated SKU: 66343100](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-31-mm-type-k-with-thread-plug-m12-zinc-coated-sku-66343100/): Material: Version K: Duroplast PF31, black, glossy finish. Spindle: Steel, zinc-plated Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303). Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 28 mm type K with thread plug M10 zinc coated SKU: 66342800](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-28-mm-type-k-with-thread-plug-m10-zinc-coated-sku-66342800/): Material: Version K: Duroplast PF31, black, glossy finish. Spindle: Steel, zinc-plated Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303). Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 26 mm type K with thread plug M10 zinc coated SKU: 66342600](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-26-mm-type-k-with-thread-plug-m10-zinc-coated-sku-66342600/): Material: Version K: Duroplast PF31, black, glossy finish. Spindle: Steel, zinc-plated Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303). Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 23 mm type K with thread plug M8 zinc coated SKU: 66342300](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-23-mm-type-k-with-thread-plug-m8-zinc-coated-sku-66342300/): Material: Version K: Duroplast PF31, black, glossy finish. Spindle: Steel, zinc-plated Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303). Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 22 mm type K with thread plug M6 zinc coated SKU: 66342200](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-22-mm-type-k-with-thread-plug-m6-zinc-coated-sku-66342200/): Material: Version K: Duroplast PF31, black, glossy finish. Spindle: Steel, zinc-plated Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303). Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 21 mm type K with thread plug M6 zinc coated SKU: 66342100](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-21-mm-type-k-with-thread-plug-m6-zinc-coated-sku-66342100/): Material: Version K: Duroplast PF31, black, glossy finish. Spindle: Steel, zinc-plated Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303). Revolving cylindrical handles 598 are noted for their modern design. - [Revolving cylindrical handle 598 made from plastic diameter 18 mm type K with thread plug M6 zinc coated SKU: 66341800](https://maedler.in/product/revolving-cylindrical-handle-598-made-from-plastic-diameter-18-mm-type-k-with-thread-plug-m6-zinc-coated-sku-66341800/): Material: Version K: Duroplast PF31, black, glossy finish. Spindle: Steel, zinc-plated Version N: Duroplast PF31, black, glossy finish. Spindle: Stainless steel 1.4305 (AISI 303). Revolving cylindrical handles 598 are noted for their modern design. - [Retractable handle NG version K handle diameter 28mm made from plastic thread M8 folding mechanism steel black oxide finished SKU: 66320200](https://maedler.in/product/retractable-handle-ng-version-k-handle-diameter-28mm-made-from-plastic-thread-m8-folding-mechanism-steel-black-oxide-finished-sku-66320200/): Material Version K: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Steel, black oxide finish.Material Version N: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Stainless steel 1.4305 (AISI 303).All handles are revolving (type 598).Retractable handles are used when the handle must at times not stick out.The handle is pulled out of its taper seating and then tilted. A compression spring locks the handle in both end positions. When folded back, the handle automatically firmly locks in the taper seat. - [Retractable handle NG version K handle diameter 26mm made from plastic thread M6 folding mechanism steel black oxide finished SKU: 66320100](https://maedler.in/product/retractable-handle-ng-version-k-handle-diameter-26mm-made-from-plastic-thread-m6-folding-mechanism-steel-black-oxide-finished-sku-66320100/): Material Version K: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Steel, black oxide finish.Material Version N: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Stainless steel 1.4305 (AISI 303).All handles are revolving (type 598).Retractable handles are used when the handle must at times not stick out.The handle is pulled out of its taper seating and then tilted. A compression spring locks the handle in both end positions. When folded back, the handle automatically firmly locks in the taper seat. - [Retractable handle NG version K handle diameter 21mm made from plastic thread M5 folding mechanism steel black oxide finished SKU: 66320000](https://maedler.in/product/retractable-handle-ng-version-k-handle-diameter-21mm-made-from-plastic-thread-m5-folding-mechanism-steel-black-oxide-finished-sku-66320000/): Material Version K: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Steel, black oxide finish.Material Version N: Grip part: Plastic Duroplast PF31, black, glossy finish. Folding mechanism: Stainless steel 1.4305 (AISI 303).All handles are revolving (type 598).Retractable handles are used when the handle must at times not stick out.The handle is pulled out of its taper seating and then tilted. A compression spring locks the handle in both end positions. When folded back, the handle automatically firmly locks in the taper seat. - [Handle GT-A type N NBR surface shiny M10x15mm stainless steel 1.4301 SKU: 66240310](https://maedler.in/product/handle-gt-a-type-n-nbr-surface-shiny-m10x15mm-stainless-steel-1-4301-sku-66240310/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT-A type N NBR surface shiny M8x12mm stainless steel 1.4301 SKU: 66240308](https://maedler.in/product/handle-gt-a-type-n-nbr-surface-shiny-m8x12mm-stainless-steel-1-4301-sku-66240308/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT type N NBR surface shiny insert M6 stainless steel 1.4301 SKU: 66240306](https://maedler.in/product/handle-gt-type-n-nbr-surface-shiny-insert-m6-stainless-steel-1-4301-sku-66240306/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT-A type N NBR surface shiny M5x8mm stainless steel 1.4301 SKU: 66240305](https://maedler.in/product/handle-gt-a-type-n-nbr-surface-shiny-m5x8mm-stainless-steel-1-4301-sku-66240305/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT-A type N NBR surface shiny M4x6,5mm stainless steel 1.4301 SKU: 66240304](https://maedler.in/product/handle-gt-a-type-n-nbr-surface-shiny-m4x65mm-stainless-steel-1-4301-sku-66240304/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT-A type S silicone surface matt M10x15mm stainless steel 1.4301 SKU: 66240210](https://maedler.in/product/handle-gt-a-type-s-silicone-surface-matt-m10x15mm-stainless-steel-1-4301-sku-66240210/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT-A type S silicone surface matt M8x12mm stainless steel 1.4301 SKU: 66240208](https://maedler.in/product/handle-gt-a-type-s-silicone-surface-matt-m8x12mm-stainless-steel-1-4301-sku-66240208/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT type S silicone surface matt insert M6 stainless steel 1.4301 SKU: 66240206](https://maedler.in/product/handle-gt-type-s-silicone-surface-matt-insert-m6-stainless-steel-1-4301-sku-66240206/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT-A type S silicone surface matt M5x8mm stainless steel 1.4301 SKU: 66240205](https://maedler.in/product/handle-gt-a-type-s-silicone-surface-matt-m5x8mm-stainless-steel-1-4301-sku-66240205/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT-A type S silicone surface matt M4x6,5mm stainless steel 1.4301 SKU: 66240204](https://maedler.in/product/handle-gt-a-type-s-silicone-surface-matt-m4x65mm-stainless-steel-1-4301-sku-66240204/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304). Versatile handle, with threaded stud. Long shape with big ball-end, easy and safe to grip, also with thick gloves. On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering. Temperature range type S: -55°C to +225ºC. Temperature range type N: -10°C to +100ºC. - [Handle GT type N natural rubber insert M10 SKU: 66240110](https://maedler.in/product/handle-gt-type-n-natural-rubber-insert-m10-sku-66240110/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering.Temperature range type S: -55°C to +225ºC.Temperature range type N: -10°C to +100ºC. - [Handle GT type N natural rubber insert M8 SKU: 66240108](https://maedler.in/product/handle-gt-type-n-natural-rubber-insert-m8-sku-66240108/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering.Temperature range type S: -55°C to +225ºC.Temperature range type N: -10°C to +100ºC. - [Handle GT type N natural rubber insert M6 SKU: 66240106](https://maedler.in/product/handle-gt-type-n-natural-rubber-insert-m6-sku-66240106/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering.Temperature range type S: -55°C to +225ºC.Temperature range type N: -10°C to +100ºC. - [Handle GT type N natural rubber insert M5 SKU: 66240105](https://maedler.in/product/handle-gt-type-n-natural-rubber-insert-m5-sku-66240105/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering.Temperature range type S: -55°C to +225ºC.Temperature range type N: -10°C to +100ºC. - [Handle GT type N natural rubber insert M4 SKU: 66240104](https://maedler.in/product/handle-gt-type-n-natural-rubber-insert-m4-sku-66240104/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering.Temperature range type S: -55°C to +225ºC.Temperature range type N: -10°C to +100ºC. - [Handle GT type S silicone insert M10 stainless steel 1.4301 SKU: 66240010](https://maedler.in/product/handle-gt-type-s-silicone-insert-m10-stainless-steel-1-4301-sku-66240010/): Material: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.Temperature range: -55°C to +225ºC. - [Handle GT type S silicone insert M8 stainless steel 1.4301 SKU: 66240008](https://maedler.in/product/handle-gt-type-s-silicone-insert-m8-stainless-steel-1-4301-sku-66240008/): Material: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.Temperature range: -55°C to +225ºC. - [Handle GT type S silicone insert M6 stainless steel 1.4301 SKU: 66240006](https://maedler.in/product/handle-gt-type-s-silicone-insert-m6-stainless-steel-1-4301-sku-66240006/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering.Temperature range type S: -55°C to +225ºC.Temperature range type N: -10°C to +100ºC. - [Handle GT type S silicone insert M5 stainless steel 1.4301 SKU: 66240005](https://maedler.in/product/handle-gt-type-s-silicone-insert-m5-stainless-steel-1-4301-sku-66240005/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering.Temperature range type S: -55°C to +225ºC.Temperature range type N: -10°C to +100ºC. - [Handle GT type S silicone insert M4 stainless steel 1.4301 SKU: 66240004](https://maedler.in/product/handle-gt-type-s-silicone-insert-m4-stainless-steel-1-4301-sku-66240004/): Material Type S: Elastomer silicone, black, hardness 70º +/-5º Shore A. Metall part stainless steel 1.4301 (AISI 304).Material Type N: Elastomer NBR, black, hardness 75º +/-5º Shore A. Metall part steel zinc-plated.Versatile handle. Long shape with big ball-end, easy and safe to grip, also with thick gloves.On choice from silicone for food machines / household sector or from oil-resistant NBR for general use in mechanical engineering.Temperature range type S: -55°C to +225ºC.Temperature range type N: -10°C to +100ºC. - [Cylindrical knop press-on-type thermoplastic (Polypropylene PP) outside diameter 28mm bore 15mm SKU: 66220228](https://maedler.in/product/cylindrical-knop-press-on-type-thermoplastic-polypropylene-pp-outside-diameter-28mm-bore-15mm-sku-66220228/): Material: Thermoplast (Polypropylene PP), impact resistant, black, matt finish. These knobs do not require a thread at the shaft. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place. The shaft end with tolerance h9 should be slightly rounded or chamfered (30°). The knob is quickly mounted and sits absolute vibration-tight. Temperature resistant up to 80ºC. - [Cylindrical knop press-on-type thermoplastic (Polypropylene PP) outside diameter 26mm bore 12mm SKU: 66220226](https://maedler.in/product/cylindrical-knop-press-on-type-thermoplastic-polypropylene-pp-outside-diameter-26mm-bore-12mm-sku-66220226/): Material: Thermoplast (Polypropylene PP), impact resistant, black, matt finish. These knobs do not require a thread at the shaft. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place. The shaft end with tolerance h9 should be slightly rounded or chamfered (30°). The knob is quickly mounted and sits absolute vibration-tight. Temperature resistant up to 80ºC. - [Cylindrical knop press-on-type thermoplastic (Polypropylene PP) outside diameter 23mm bore 10mm SKU: 66220223](https://maedler.in/product/cylindrical-knop-press-on-type-thermoplastic-polypropylene-pp-outside-diameter-23mm-bore-10mm-sku-66220223/): Material: Thermoplast (Polypropylene PP), impact resistant, black, matt finish. These knobs do not require a thread at the shaft. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place. The shaft end with tolerance h9 should be slightly rounded or chamfered (30°). The knob is quickly mounted and sits absolute vibration-tight. Temperature resistant up to 80ºC. - [Cylindrical knop press-on-type thermoplastic (Polypropylene PP) outside diameter 21mm bore 10mm SKU: 66220221](https://maedler.in/product/cylindrical-knop-press-on-type-thermoplastic-polypropylene-pp-outside-diameter-21mm-bore-10mm-sku-66220221/): Material: Thermoplast (Polypropylene PP), impact resistant, black, matt finish. These knobs do not require a thread at the shaft. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place. The shaft end with tolerance h9 should be slightly rounded or chamfered (30°). The knob is quickly mounted and sits absolute vibration-tight. Temperature resistant up to 80ºC. - [Cylindrical knop press-on-type thermoplastic (Polypropylene PP) outside diameter 18mm bore 8mm SKU: 66220218](https://maedler.in/product/cylindrical-knop-press-on-type-thermoplastic-polypropylene-pp-outside-diameter-18mm-bore-8mm-sku-66220218/): Material: Thermoplast (Polypropylene PP), impact resistant, black, matt finish. These knobs do not require a thread at the shaft. During mounting, easy blows with a soft hammer are sufficient to drive the knob into place. The shaft end with tolerance h9 should be slightly rounded or chamfered (30°). The knob is quickly mounted and sits absolute vibration-tight. Temperature resistant up to 80ºC. - [Control knob 726.1 version 2 type S ø42 SKU: 66070742](https://maedler.in/product/control-knob-726-1-version-2-type-s-o42-sku-66070742/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 2 type S ø34 SKU: 66070734](https://maedler.in/product/control-knob-726-1-version-2-type-s-o34-sku-66070734/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [SKU: 66070727](https://maedler.in/product/sku-66070727/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 2 type B ø42 SKU: 66070642](https://maedler.in/product/control-knob-726-1-version-2-type-b-o42-sku-66070642/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 2 type B ø34 SKU: 66070634](https://maedler.in/product/control-knob-726-1-version-2-type-b-o34-sku-66070634/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 2 type B ø27 SKU: 66070627](https://maedler.in/product/control-knob-726-1-version-2-type-b-o27-sku-66070627/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 2 type A ø42 SKU: 66070542](https://maedler.in/product/control-knob-726-1-version-2-type-a-o42-sku-66070542/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 2 type A ø34 SKU: 66070534](https://maedler.in/product/control-knob-726-1-version-2-type-a-o34-sku-66070534/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 2 type A ø27 SKU: 66070527](https://maedler.in/product/control-knob-726-1-version-2-type-a-o27-sku-66070527/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type S ø42 SKU: 66070342](https://maedler.in/product/control-knob-726-1-version-1-type-s-o42-sku-66070342/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type S ø34 SKU: 66070334](https://maedler.in/product/control-knob-726-1-version-1-type-s-o34-sku-66070334/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type S ø27 SKU: 66070327](https://maedler.in/product/control-knob-726-1-version-1-type-s-o27-sku-66070327/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type S ø22 SKU: 66070322](https://maedler.in/product/control-knob-726-1-version-1-type-s-o22-sku-66070322/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type B ø42 SKU: 66070242](https://maedler.in/product/control-knob-726-1-version-1-type-b-o42-sku-66070242/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type B ø34 SKU: 66070234](https://maedler.in/product/control-knob-726-1-version-1-type-b-o34-sku-66070234/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type B ø27 SKU: 66070227](https://maedler.in/product/control-knob-726-1-version-1-type-b-o27-sku-66070227/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type B ø22 SKU: 66070222](https://maedler.in/product/control-knob-726-1-version-1-type-b-o22-sku-66070222/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type A ø42 SKU: 66070142](https://maedler.in/product/control-knob-726-1-version-1-type-a-o42-sku-66070142/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type A ø34 SKU: 66070134](https://maedler.in/product/control-knob-726-1-version-1-type-a-o34-sku-66070134/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type A ø27 SKU: 66070127](https://maedler.in/product/control-knob-726-1-version-1-type-a-o27-sku-66070127/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Control knob 726.1 version 1 type A ø22 SKU: 66070122](https://maedler.in/product/control-knob-726-1-version-1-type-a-o22-sku-66070122/): Material: Aluminium, black anodised finish, scale (version S) and arrow (version A): white, engraved with laser precision . Knob cover disk: light- grey plastic. Collet/hexagon nut: brass. Stainless steel set screw: DIN 916 with Allen screw and serrated end. Shape A: with arrow Shape B: neutral, without arrow or grading. Shape S: with scale 0...9, 20 graduations. Version 1: with set screw (bore d2). Version 2: with collet (bore d3). When mounting, the cover is pressed in by hand, for demounting it can be lifted up at the slot using a screwdriver. The collet version allows easy adjustment of the knobs and offers completely secure mounting on the shaft. Scale or arrow are fully abrasion proof and easy to read, as the engraving makes the aluminium coloured figures and numbers stand out against the black, anodised surface. Besides the standard scale (Version S) these knobs can be supplied with any scale desired (on request). - [Conveyor roller S1 steel zinc-plated Ø=60mm RL=600mm EL=622mm AL=652mm external thread SKU: 65682606](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o60mm-rl600mm-el622mm-al652mm-external-thread-sku-65682606/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel zinc-plated Ø=60mm RL=500mm EL=522mm AL=552mm external thread SKU: 65682605](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o60mm-rl500mm-el522mm-al552mm-external-thread-sku-65682605/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel zinc-plated Ø=60mm RL=400mm EL=422mm AL=452mm external thread SKU: 65682604](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o60mm-rl400mm-el422mm-al452mm-external-thread-sku-65682604/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel zinc-plated Ø=60mm RL=300mm EL=322mm AL=352mm external thread SKU: 65682603](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o60mm-rl300mm-el322mm-al352mm-external-thread-sku-65682603/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel zinc-plated Ø=50mm RL=500mm EL=520mm AL=550mm external thread SKU: 65682505](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o50mm-rl500mm-el520mm-al550mm-external-thread-sku-65682505/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel zinc-plated Ø=50mm RL=400mm EL=420mm AL=450mm external thread SKU: 65682504](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o50mm-rl400mm-el420mm-al450mm-external-thread-sku-65682504/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel zinc-plated Ø=50mm RL=300mm EL=320mm AL=350mm external thread SKU: 65682503](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o50mm-rl300mm-el320mm-al350mm-external-thread-sku-65682503/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel zinc-plated Ø=50mm RL=200mm EL=220mm AL=250mm external thread SKU: 65682502](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o50mm-rl200mm-el220mm-al250mm-external-thread-sku-65682502/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel zinc-plated Ø=50mm RL=400mm EL=410mm AL=430mm spring axle SKU: 65681504](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o50mm-rl400mm-el410mm-al430mm-spring-axle-sku-65681504/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Conveyor roller S1 steel zinc-plated Ø=50mm RL=300mm EL=310mm AL=330mm spring axle SKU: 65681503](https://maedler.in/product/conveyor-roller-s1-steel-zinc-plated-o50mm-rl300mm-el310mm-al330mm-spring-axle-sku-65681503/): Material: Steel, bright or zinc-plated.With standard ball bearings made of steel.On request: Other versions and axle variants are available, e.g. conveyor rollers with flanged sprocket. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 22 teeth material steel SKU: 12712200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-22-teeth-material-steel-sku-12712200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 21 teeth material steel SKU: 12712100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-21-teeth-material-steel-sku-12712100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 20 teeth material steel SKU: 12712000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-20-teeth-material-steel-sku-12712000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 19 teeth material steel SKU: 12711900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-19-teeth-material-steel-sku-12711900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 18 teeth material steel SKU: 12711800](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-18-teeth-material-steel-sku-12711800/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 17 teeth material steel SKU: 12711700](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-17-teeth-material-steel-sku-12711700/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 16 teeth material steel SKU: 12711600](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-16-teeth-material-steel-sku-12711600/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 15 teeth material steel SKU: 12711500](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-15-teeth-material-steel-sku-12711500/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 14 teeth material steel SKU: 12711400](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-14-teeth-material-steel-sku-12711400/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 13 teeth material steel SKU: 12711300](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-13-teeth-material-steel-sku-12711300/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 12 teeth material steel SKU: 12711200](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-12-teeth-material-steel-sku-12711200/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 11 teeth material steel SKU: 12711100](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-11-teeth-material-steel-sku-12711100/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 10 teeth material steel SKU: 12711000](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-10-teeth-material-steel-sku-12711000/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensions: B1 = 10,8 mm, B2 = 30,3 mm c = 2,0 mm, r3 = 19 mm.Other dimensions: See the table. - [Double-strand sprocket ZRS with hub 12 B-2 3/4x7/16" 9 teeth material steel SKU: 12710900](https://maedler.in/product/double-strand-sprocket-zrs-with-hub-12-b-2-3-4x7-16-9-teeth-material-steel-sku-12710900/): Material: Steel C45, not hardened. Pre-bored. Sprockets with 45 teeth and above are made of grey cast iron GG25.General dimensi